- GLSL shader wasn't aware of alpha predivide option,
always assuming alpha is straight. Gave wrong results
when displaying transparent float buffers.
- GLSL display wasn't aware of float buffers with number
of channels different from 4, crashing when trying to
display image with different number of channels.
This required a bit larger changes, namely now it's
possible to pass format (GL_RGB, GL_RGBAm GL_LUMINANCE)
to glaDrawPixelsTex, This also implied adding format to
glaDrawPixelsAuto and modifying all places where this
functions are called.
Now GLSL will handle both 3 and 4 channels buffers,
single channel images are handled by CPU.
- Replaced hack for render result displaying with a bit
different hack.
Namely CPU conversion will happen only during render,
once render is done GLSL would be used for displaying
render result on a screen.
This is so because of the way renderer updates parts
of the image -- it happens without respect to active
render layer in image user. This is harmless because
only display buffer is modifying, but this is tricky
because we don't have original buffer opened during
rendering.
One more related fix here was about when rendering
multiple layers, wrong image would be displaying when
rendering is done. Added a signal to invalidate
display buffer once rendering is done (only happens
when using multiple layers). This solves issue with
wrong buffer stuck on the display when using regular
CPU display space transform and if GLSL is available
it'll make image displayed with a GLSL shader.
- As an additional change, byte buffers now also uses
GLSL display transform.
So now only dutehr and RGB curves are stoppers for
using GLSL for all kind of display transforms.
Uses GLSL for drawing image in Image Editor space.
This requires change in image_buffer_rect_update, so
original float buffer is being updated as well. This
is unlikely be something bad, but will keep an eye
on this change.
Also no byte buffer allocation happens there, this
is so because byte buffer used for display only
and in case of GLSL display such allocation and
partial update is just waste of time.
Also switched OpenGL render from using CPU color
space linearization to GLSL color space transform.
Makes OpenGL rendering pretty much faster (but
still slower than in 2.60).
internal changes:
- Added functions to setup GLSL shader for color
space conversion in colormanagement.c. Currently
conversion form a colorspace defined by a role to
linear space is implemented. Easy to extend to
other cases.
- Added helper functions to glutil.c which does
smarter image buffer draw (calling all needed OCIO
stuff, editors now could draw image buffer with a
single function call -- all the checks are done in
glutil.c).
- Also added helper function for buffer linearization
from a given role to glutil.c. Everyone now able to
linearize buffer with a single call.
This function will do nothing is GLSL routines fails
or not supported.
And one last this: this function uses offscreen
drawing, could potentially give issues on some
cards, also will keep an eye on this.
Implemented using GLSL API from OpenColorIO library and
some general functions were added to it's c-api:
- OCIO_setupGLSLDraw prepares OpenGL context for GPU-based
transformation for a giver processor.
This function compiles and links shader, sets up it's
argument. After this transformation would be applied
on an image displaying as a 2D texture.
So, glaDrawPixelsTex called after OCIO_setupGLSLDraw will
do a proper color space transform.
- OCIO_finishGLSLDraw restores OpenGL context after all
color-managed display is over.
- OCIO_freeOGLState frees allocated state structure used
for cacheing some GLSL-related stuff.
There're some utility functions in IMB_colormanagent which
are basically proxies to lower level OCIO functions but
which could be used from any place in blender.
Chacheing of movie clip frame on GPU is also removed now,
and either glaDrawPixelsTex or glaDrawPixelsAuto are used
for display now. This is so no code duplication happens
now and no large textures are lurking around in GPU memory.
Known issues:
- Texture buffer and GLSL are no longer checking for
video card capabilities, possibly could lead to some
artifacts on crappy drivers/cards.
- Only float buffers are displaying using GLSL, byte
buffers will still use fallback display method.
This is to be addressed later.
- If RGB curves are used as a part of display transform,
GLSL display will also be disabled. This is also thing
to be solved later.
Additional changes:
- glaDrawPixelsTexScaled will now use RGBA16F as an
internal format of storing textures when it's used
to draw float buffer. This is needed so LUT are
applied without precision loss.
- pass string size to BLI_timestr() to avoid possible buffer overrun.
- quiet warning for mingw.
- include guards for windows utf conversion funcs.
- fix for mistage in edge-angle-selection check.
- some style cleanup.
In text editor, the CTRL+F find now opens property region (or keeps it) and
activates the search button for input.
That's already nice! But next step should be to do a search on exit of
the button (or while typing). That's stuff I need Campbell to help with though.
Notes:
- Probably Py api for property buttons could get an "operator=" arg?
- The warning menu "not found" should go away
- I also suggest to make "wrap" search default for new editors
Conflicts resolved:
source/blenderplayer/bad_level_call_stubs/SConscript
Partly reverted changes to intern/cycles/blender/addon/ui.py in revision 52899
to make it easier to merge trunk changes.
and RNA for it independent of the build flag for enabling Freestyle. Suggested
by Sergey Sharybin through a code review of the branch.
* Many #ifdef WITH_FREESTYLE blocks were removed to always have Freestyle-specific
DNA file specification and RNA for it built in Blender. This will allow Freestyle
setting survive even when a non-Freestyle build is used for loading and saving
files. It is noted that operations are still conditionally built through #ifdef
WITH_FREESTYLE blocks.
* To this end, new blenkernel files BKE_freestyle.h and intern/freestyle.c have
been added. All API functions in FRS_freestyle_config.h as well as some of those
in FRS_freestyle.h were moved to the new files. Now the relocated API functions
have BKE_ prefix instead of FRS_.
note: that this intentionally removes check to exit vpaint mode when a vertex color layer is removed,
since being in vertex-paint mode without a vertex color layer is supported.
also minor change to drawing camera limits while picking from previous commit.
- when running knife project, disable vertex selection since it may select areas between the newly cut regions.
add EDBM_selectmode_disable() function since loopcut does this too.
- (optimization) avoid looping over all geometry when flushing and no selection exists.
Without this, bezier curves at 12 resolution are very high detail for many tasks when converted from freehand strokes.
so add the option to convert 1:1 grease pencil points to curve polygons.
also add use_handles option to curve conversion which is used when converting beziers to poly lines.
PyNodes opens up the node system in Blender to scripters and adds a number of UI-level improvements.
=== Dynamic node type registration ===
Node types can now be added at runtime, using the RNA registration mechanism from python. This enables addons such as render engines to create a complete user interface with nodes.
Examples of how such nodes can be defined can be found in my personal wiki docs atm [1] and as a script template in release/scripts/templates_py/custom_nodes.py [2].
=== Node group improvements ===
Each node editor now has a tree history of edited node groups, which allows opening and editing nested node groups. The node editor also supports pinning now, so that different spaces can be used to edit different node groups simultaneously. For more ramblings and rationale see (really old) blog post on code.blender.org [3].
The interface of node groups has been overhauled. Sockets of a node group are no longer displayed in columns on either side, but instead special input/output nodes are used to mirror group sockets inside a node tree. This solves the problem of long node lines in groups and allows more adaptable node layout. Internal sockets can be exposed from a group by either connecting to the extension sockets in input/output nodes (shown as empty circle) or by adding sockets from the node property bar in the "Interface" panel. Further details such as the socket name can also be changed there.
[1] http://wiki.blender.org/index.php/User:Phonybone/Python_Nodes
[2] http://projects.blender.org/scm/viewvc.php/trunk/blender/release/scripts/templates_py/custom_nodes.py?view=markup&root=bf-blender
[3] http://code.blender.org/index.php/2012/01/improving-node-group-interface-editing/
This makes it so sample line (for all image editor, sequencer and compositor)
displaying managed color for byte buffers as well. It was simply not implemented
before.
Resolved conflicts:
release/datafiles/startup.blend
source/blender/editors/space_nla/nla_buttons.c
Also updated source/blender/blenkernel/intern/linestyle.c as a follow-up of
recent changes for the use of bool.
alpha, added option when drawing depth to disable alpha clip override.
We use that in texture paint cursor now. Not too common but may be
useful for people dealing with cloning plugins.
Reported by kgeogeo on irc, thanks.
Zooming in on images in Image window now shows pixels again (was filtered).
Now the glaDrawPixelsTex() and glaDrawPixelsAuto() have an argument to
define if images should zoom in with linear filter, or draw pixels.
Automatic switching for drawing pixel buffers via glDrawPixels or using GPU textures
It works with a User Preference limit, in megapixels, to define whether to use
GPU or direct pixel drawing. Default is now initialized to 10 MP (4k buffers).
Especially for zooming out (draw smaller) texture drawing is much smaller. Also
Nvidia cards typically draw much faster with textures in general.
Added to node backdrop first now, the other editors follow in a next commit.
For coders: added new DNA function to initialize new struct variables, so you
don't have to sub-version files anymore.
DNA_struct_elem_find(fd->filesdna, "structname", "typename", "varname")
"filesdna" is the sdna description of the current file being versioned.
Sergey Sharybin
Campbell Barton
Tamito Kajiyama
Ton Roosendaal
Thomas Dinges
Lukas Toenne
Antonis Ryakiotakis
Joshua Leung