Move `eUndoStepDir` to `BKE_undo_system.h` and use its values
everywhere.
Note that this also introduce the `STEP_INVALID` value in that enum.
Finally, kept the matching struct members in some lower-level readfile
code as an `int` to avoid having to include `BKE_undo_system.h` in a lot
of unrelated files.
Rename it to mark it is only for `encode` callbacks, fix `encode`
callback of text undo to early fail in case it gets a NULL context, add
an assert to `BKE_undosys_step_push_with_type` that context is not NULL
when undotype requires a valid one.
Note that in practice this should not change anything, currently it
seems that we always get a valid context in
`BKE_undosys_step_push_with_type`?
Remove DNA headers, using forward declarations where possible.
Also removed duplicate header, header including it's self
and unnecessary inclusion of libc system headers from BKE header.
Issue exposed by rB4c7b1766a7f1.
Main idea is that non-memfile first undo step should check into previous
memfile and tag the ID it is editing as `future_changed`.
That way, when we go back and undo to the memfile, said IDs are properly
detected as changed and re-read from the memfile.
Otherwise, undo system sees them as unchanged, and just re-use the
current data instead.
Note that currently only Sculpt mode seems affected (probably because it
is storing the mode switch itself as a Sculpt undo step instead of a
memfile one), but similar action might be needed in some other cases
too.
Maniphest Tasks: T82388
Differential Revision: https://developer.blender.org/D9510
Note that given how experimental is working currently, I had to rename
and inverse the effect of the experimental undo flag, which will now
instead activate legacy code when set.
The problem was that in direct_link_id_restore_recalc, recalc_undo_accumulated
should contain the changes from the target state to the current state. However
it had already been cleared at that point, to start accumulating changes up to
the next undo push.
Delaying the clear of this flag seems like the obvious solution, but it's hard
to find the right place for that (if there is one). Instead this splits up the
flag into two separate variables.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D7402
These changes only have an effect when the experimental Undo Speedup preference
is enabled.
* For DEG_id_tag_update, accumulate recalc flags immediately before the undo
push happens instead of afterwards. Otherwise the undo state does not
contain enough flags, and the current state may contain too many flags.
This also means we call DEG_id_tag_update after undo with the accumulated
flags to ensure they are flushed to other datablocks.
* For undo, accumulate recalc flags in id->recalc and clear accumulated flags
immediately. Not clearing would cause circular behavior where accumulated
flags may never end up being cleared.
This matches what happens after an undo push where these are also cleared,
indicating that the undo state and current in-memory state match exactly.
* Don't change id->recalc of identical datablocks, it should not be needed.
There is one exception for armatures where pointers across datablocks
exist which otherwise would cause problems. There may be a better solution
to this but it seems to work in agent 327 production files.
* This contains a change in undofile.c to avoid detecting all datablocks as
changed for the first of the two undo steps, where we restore to the state
of the last undo push before going to the one before.
Without this the whole system is much less efficient. However this is unsafe
in the sense that if an app handler or operators edits a datablock after an
undo push, that change will not be undone.
It can be argued that this is acceptable behavior, since a following undo push
will include that change and this may already have unexpected side effects.
Ref T60695
Differential Revision: https://developer.blender.org/D7339
The feature is hidden behind an experimental option, you'll have to
enable it in the preferences to try it.
This feature is not yet considered fully stable, crashes may happen, as
well as .blend file corruptions (very unlikely, but still possible).
In a nutshell, the ideas behind this code are to:
* Detect unchanged IDs across an undo step.
* Reuse as much as possible existing IDs memory, even when its content
did change.
* Re-use existing depsgraphs instead of building new ones from scratch.
* Store accumulated recalc flags, to avoid needless re-compute of things
that did not change, when the ID itself is detected as modified.
See T60695 and D6580 for more technical details.
This introduces object mode tagging for data which hasn't yet been
written back to the ID data.
Now when selecting other sculpt objects, the original objects data is
flushed back to the ID before writing a memfile undo step.
This complicated handling of undo steps in a generic way
especially switching between undo systems that stored data to ones
that accumulated changes.
Now each undo system must treat it's steps as check-point,
internally it can apply/rewind changes.
This commit also fixes projection paint where the object mode wasn't
following the undo steps.
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
Memfile undo isn't compatible with sculpt or edit-mode.
This didn't work in 2.7x, so best disable memfile undo for now in
situations where it's going to loose data or crash.
Exiting modes shouldn't be needed since loading the new memfile
will free the old data.
Sculpt mode dynamic topology was adding undo data on exiting the mode
which isn't logical in this case and can be avoided altogether.
Brecht authored this commit, but he gave me the honours to actually
do it. Here it goes; Blender Internal. Bye bye, you did great!
* Point density, voxel data, ocean, environment map textures were removed,
as these only worked within BI rendering. Note that the ocean modifier
and the Cycles point density shader node continue to work.
* Dynamic paint using material shading was removed, as this only worked
with BI. If we ever wanted to support this again probably it should go
through the baking API.
* GPU shader export through the Python API was removed. This only worked
for the old BI GLSL shaders, which no longer exists. Doing something
similar for Eevee would be significantly more complicated because it
uses a lot of multiplass rendering and logic outside the shader, it's
probably impractical.
* Collada material import / export code is mostly gone, as it only worked
for BI materials. We need to add Cycles / Eevee material support at some
point.
* The mesh noise operator was removed since it only worked with BI
material texture slots. A displacement modifier can be used instead.
* The delete texture paint slot operator was removed since it only worked
for BI material texture slots. Could be added back with node support.
* Not all legacy viewport features are supported in the new viewport, but
their code was removed. If we need to bring anything back we can look at
older git revisions.
* There is some legacy viewport code that I could not remove yet, and some
that I probably missed.
* Shader node execution code was left mostly intact, even though it is not
used anywhere now. We may eventually use this to replace the texture
nodes with Cycles / Eevee shader nodes.
* The Cycles Bake panel now includes settings for baking multires normal
and displacement maps. The underlying code needs to be merged properly,
and we plan to add back support for multires AO baking and add support
to Cycles baking for features like vertex color, displacement, and other
missing baking features.
* This commit removes DNA and the Python API for BI material, lamp, world
and scene settings. This breaks a lot of addons.
* There is more DNA that can be removed or renamed, where Cycles or Eevee
are reusing some old BI properties but the names are not really correct
anymore.
* Texture slots for materials, lamps and world were removed. They remain
for brushes, particles and freestyle linestyles.
* 'BLENDER_RENDER' remains in the COMPAT_ENGINES of UI panels. Cycles and
other renderers use this to find all panels to show, minus a few panels
that they have their own replacement for.
