This is fully unreadable to have lots of boolean arguments scattered across the
whole argument list. What does `false, true, true` mean in terms of behavior?
Replace those with bitfield which has advantage of having more human readable
meaning.
The RenderResult struct still has a listbase of RenderLayer, but that's ok
since this is strictly for rendering.
* Subversion bump (to 2.80.2)
* DNA low level doversion (renames) - only for .blend created since 2.80 started
Note: We can't use DNA_struct_elem_find or get file version in init_structDNA,
so we are manually iterating over the array of the SDNA elements instead.
Note 2: This doversion change with renames can be reverted in a few months. But
so far it's required for 2.8 files created between October 2016 and now.
Reviewers: campbellbarton, sergey
Differential Revision: https://developer.blender.org/D2927
This is a final step of having proper ownership. Now selecting different
layers in the "top bar" will actually do what this is expected to do.
Surely, there are still things to be done under the hood, that will happen
in a less intrusive way.
This would break if using preview in VSE. We now use the scene engine
not the workspace engine.
That said we could have the preview engine defined as part of the sequence strip
as we had for draw modes in the past. But this is a separated topic for a
separated patch.
This issue in particular was introduced in e4f2b2be26.
Note: VSE preview is still broken in two cases:
* If you have Eevee as the engine in the Scene of the Scene strip.
* If you use Clay, save the file, and re-open.
The issue was caused by render result identifier only consist of scene name,
which could indeed cause conflicts.
On the one hand, there are quite some areas in Blender where we need identifier
to be unique to properly address things. Usually this is required for sub-data
of IDs, like bones. On another hand, it's not that hard to support this
particular case and avoid possible frustration.
The idea is, we add library name to render identifier for linked scenes. We use
library name and not pointer so we preserve render results through undo stack.
Reviewers: campbellbarton, mont29, brecht
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D2836
Previously it was returning short, which was really easy to (a) compare against
non-ID type value (b) forget to handle some specific value in switch statement.
Both issues happened in the nearest past, so it's time to tighten some nuts
here.
Most of the change related on silencing strict compiler warning now, but there
is also one tricky aspect: ID_NLA is not in the IDType enum. So there is still
cast to short to handle that switch. If someone has better ideas how to deal
with this please go ahead :)
Deleting the old internal audaspace.
Major changes from there are:
- The whole library was refactored to use C++11.
- Many stability and performance improvements.
- Major Python API refactor:
- Most requested: Play self generated sounds using numpy arrays.
- For games: Sound list, random sounds and dynamic music.
- Writing sounds to files.
- Sequencing API.
- Opening sound devices, eg. Jack.
- Ability to choose different OpenAL devices in the user settings.
Bug introduced in recent ID copying refactor.
This commit basically sanitizes seq strip copying behavior, by making
destination scene pointer mandatory (and source one a const one).
Nothing then prevents you from using same pointer as source and
destination!
This will allow much finer controll over how we copy data-blocks, from
full copy in Main database, to "lighter" ones (out of Main, inside an
already allocated datablock, etc.).
This commit also transfers a llot of what was previously handled by
per-ID-type custom code to generic ID handling code in BKE_library.
Hopefully will avoid in future inconsistencies and missing bits we had
all over the codebase in the past.
It also adds missing copying handling for a few types, most notably
Scene (which where using a fully customized handling previously).
Note that the type of allocation used during copying (regular in Main,
allocated but outside of Main, or not allocated by ID handling code at
all) is stored in ID's, which allows to handle them correctly when
freeing. This needs to be taken care of with caution when doing 'weird'
unusual things with ID copying and/or allocation!
As a final note, while rather noisy, this commit will hopefully not
break too much existing branches, old 'API' has been kept for the main
part, as a wrapper around new code. Cleaning it up will happen later.
Design task : T51804
Phab Diff: D2714
This will allow much finer controll over how we copy data-blocks, from
full copy in Main database, to "lighter" ones (out of Main, inside an
already allocated datablock, etc.).
This commit also transfers a llot of what was previously handled by
per-ID-type custom code to generic ID handling code in BKE_library.
Hopefully will avoid in future inconsistencies and missing bits we had
all over the codebase in the past.
It also adds missing copying handling for a few types, most notably
Scene (which where using a fully customized handling previously).
Note that the type of allocation used during copying (regular in Main,
allocated but outside of Main, or not allocated by ID handling code at
all) is stored in ID's, which allows to handle them correctly when
freeing. This needs to be taken care of with caution when doing 'weird'
unusual things with ID copying and/or allocation!
As a final note, while rather noisy, this commit will hopefully not
break too much existing branches, old 'API' has been kept for the main
part, as a wrapper around new code. Cleaning it up will happen later.
Design task : T51804
Phab Diff: D2714
Note that some little parts of code have been dissabled because eval_ctx
was not available there. This should be resolved once DerivedMesh is
replaced.
This commit effectively makes workspace switching useless as far as the
active scene layer goes.
The functions from the scene layer API to get the correct scene layer
from "context" were a placeholder to be addressed by the workspace
commit.
When workspace was merged, however G.main was used as a replacement to pass the
correct argument for the functions. As it turned out (surprise!) this
leads to crash on render preview.
We need to get rid of:
* BKE_scene_layer_context_active_ex_PLACEHOLDER
* BKE_scene_layer_context_active_PLACEHOLDER
And either use SceneLayer explicitly or replace it by:
* BKE_scene_layer_from_workspace_get
These bits became obsolete with the new layer system, so we can
simplify some code around them or avoid existing workarounds which
were trying to keep things working for them.
There are still work needed to be done for on_visible_change to
avoid unnecessary updates, but that can also happen later.
Speedup is mainly gained by multi-threading. Gives about 3x
fps gain on an edit shot file.
There is still some room for improvements, will happen in one
of the upcoming commits.
This aims at always ensuring that ID.newid (and relevant LIB_TAG_NEW)
stay in clean (i.e. cleared) state by default.
To achieve this, instead of clearing after all id copy call (would be
horribly noisy, and bad for performances), we try to completely remove
the setting of id->newid by default when copying a new ID.
This implies that areas actually needing that info (mainly, object editing
area (make single user...) and make local area) have to ensure they set
it themselves as needed.
This is far from simple change, many complex code paths to consider, so
will need some serious testing. :/
This change makes it so that when the sequences within a Scene strip are
evaluated, they use the Scene that they come from as the context as opposed
the Scene that the Scene strip is in. This is necessary, for example, in the
case of the MulticamSelector where it needs to reference strips in the original
Scene as opposed to the Scene where the Scene strip is located.
Patch by @Matt (HyperSphere), thanks!
Checking a condition right after we’ve checked it (and it hasn’t
changed). Most of these are trivial to understand.
split_quads in convertblender.c:
It seems quads should be processed and triangles should be marked as
not needing split. So I removed the outer vlr->v4 check.
Found with PVS-Studio T48917
This commit changes a lot of how IDs are handled internally, especially the unlinking/freeing
processes. So far, this was very fuzy, to summarize cleanly deleting or replacing a datablock
was pretty much impossible, except for a few special cases.
Also, unlinking was handled by each datatype, in a rather messy and prone-to-errors way (quite
a few ID usages were missed or wrongly handled that way).
One of the main goal of id-remap branch was to cleanup this, and fatorize ID links handling
by using library_query utils to allow generic handling of those, which is now the case
(now, generic ID links handling is only "knwon" from readfile.c and library_query.c).
This commit also adds backends to allow live replacement and deletion of datablocks in Blender
(so-called 'remapping' process, where we replace all usages of a given ID pointer by a new one,
or NULL one in case of unlinking).
This will allow nice new features, like ability to easily reload or relocate libraries, real immediate
deletion of datablocks in blender, replacement of one datablock by another, etc.
Some of those are for next commits.
A word of warning: this commit is highly risky, because it affects potentially a lot in Blender core.
Though it was tested rather deeply, being totally impossible to check all possible ID usage cases,
it's likely there are some remaining issues and bugs in new code... Please report them! ;)
Review task: D2027 (https://developer.blender.org/D2027).
Reviewed by campbellbarton, thanks a bunch.
