Some space types are exposed as multiple space types,
previously the key binding to set the space type would use the last
used space-type.
Now pressing the key again cycles to the next space sub-type.
Without this, shortcut display is confusing since some space types share
a key. Keymap display will need to be updated to support this.
Implements the first changes for T54115:
* Rename "User Preferences" window to "Settings" in the UI.
We'll likely put workspace settings in there, separate from the global
user settings. System settings should become separate from user
settings in future to allow settings for specific hardware.
* Add sidebar region for navigation (scrolls independently).
Addresses space problems, so we can add more categories as needed now.
* Increase size of Settings window to compensate new navigation bar.
* Group sections into User Preferences and System.
Icons for section groups by Andrzej Ambroz. Thanks!
* Bumps subversion for file compatibility.
Screenshot: https://developer.blender.org/F5715337
I also added categories for future work, but commented them out.
We may also want to redesign contents of each section now.
Reviewers: brecht, campbellbarton
Differential Revision: https://developer.blender.org/D3088
Design Task: https://developer.blender.org/T54115
This should be purely an implementation change,
for end users there should be no functional difference.
The entire key configuration is in one file with ~5000 lines of code.
Mostly avoiding code duplication and preserve comments and utility
functions from the C code.
It's a bit long but for searching and editing it's also convenient to
have it all in one file.
Notes:
- Actual keymap is shared by blender / blender_legacy
and stored in `keymap_data/blender_default.py`
This only generates JSON-like data to be passed into
`keyconfig_import_from_data`, allowing other presets to load and
manipulate the default keymap.
- Each preset defines 'keyconfig_data'
which can be shared between presets.
- Some of the utility functions for generating keymap items still
need to be ported over to Python.
- Some keymap items can be made into loops (marked as TODO).
See: D3907
That kind of implicit includes should really only be done when totally,
absolutely necessary, and ideally only with rather simple 'second-level'
headers.
Otherwise not being explicit with includes always end up biting in
unexpected ways...
Cursor motion was often causing redraws.
Distance to scrollbars that don't exist in hidden regions
caused redraws (for alpha fading).
Check if scrollbars are used before calculating fade.
Moves the Properties editor context switching to a vertical tabs region.
Design Task: T54951
Differential Revison: D3840
The tabs are regular widgets, unlike the 'old' toolshelf tabs. This means they
give mouse hover feedback, have tooltips, support the right-click menu, etc.
Also, when vertical screen space gets tight, the tabs can be scrolled, they
don't shrink like the toolshelf ones.
The tab region is slightly larger than the header. The tabs are scaled up
accordingly. This makes them nicely readable.
The header is quite empty now. As shown in T54951, we wanted to have a search
button there. This should be added next.
Implementation Notes:
* Added a new region type, RGN_TYPE_NAVIGATION.
* Having the tabs in a separate region allows scrolling of the tab-bar, unlike
the toolshelf tabs. We might want to remove the scrollbars though.
* Added a new region flag RGN_FLAG_PREFSIZE_OR_HIDDEN, to ensure the tab region
is either hidden or has a fixed size.
* Added some additional flags to support fine-tuning the layout in panel and
layout code.
* Bumps subversion.
With the new automatic handle algorithm, it is possible to do a lot
of the animation via keyframes without touching the curves. It is
however necessary to change the keyframe interpolation and handle
types in certain cases. Currently the dopesheet/action editor
allows changing the types, but does not show them in any way.
To fix, add a new menu option to display this information. For handle
type, it is represented using the shape of the key icons: diamond for
Free, clipped diamond for Aligned, square for Vector, circle for Auto
Clamp, and cirle with dot for Automatic.
Non-bezier interpolation is a property of intervals between keys,
so it is marked by drawing lines, similar to holds. In this initial
version, only the fact of non-bezier interpolation is displayed,
without distinguishing types. For summaries, the line is drawn at
half alpha if not all curves in the group are non-bezier.
In addition, it is sometimes helpful to know the general direction
of change of the curve, and which keys are extremes. This commit
also adds an option to highlight extremes, based on comparing the
keyed values with adjacent keys. Half-intensity display is used
for overshot bezier extremes, or non-uniform summaries.
Reviewers: brecht, aligorith, billreynish
Differential Revision: https://developer.blender.org/D3788
When a .blend file is dropped into Blender a small menu opens.
In that menu the user can choose between three options: Open, Link and Append.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D3801
Computation of hold blocks was done by storing ranges (with start and
an end, and likely overlapping) in a tree keyed only by the block start.
This cannot work well, and there even were comments that it is not
reliable in complex cases.
A much better way to deal with it is to split all ranges so they don't
overlap. The most thorough way of doing this is to split at all and every
known keyframe, and in this case the data can actually be stored in the
key column data structures, avoiding the need for a second tree.
In practice, splitting requires a pass to copy this data to newly added
keys, and the necessity to loop over all keyframes in the range being
added. Both are linear and don't add excess algorithmic complexity.
The new implementation also calls BLI_dlrbTree_linkedlist_sync for
its own needs, so the users of the *_to_keylist functions don't have
to do it themselves anymore.
Differential Revision: https://developer.blender.org/D3790
This commit merge the full development done in greasepencil-object branch and include mainly the following features.
- New grease pencil object.
- New drawing engine.
- New grease pencil modes Draw/Sculpt/Edit and Weight Paint.
- New brushes for grease pencil.
- New modifiers for grease pencil.
- New shaders FX.
- New material system (replace old palettes and colors).
- Split of annotations (old grease pencil) and new grease pencil object.
- UI adapted to blender 2.8.
You can get more info here:
https://code.blender.org/2017/12/drawing-2d-animation-in-blender-2-8/https://code.blender.org/2018/07/grease-pencil-status-update/
This is the result of nearly two years of development and I want thanks firstly the other members of the grease pencil team: Daniel M. Lara, Matias Mendiola and Joshua Leung for their support, ideas and to keep working in the project all the time, without them this project had been impossible.
Also, I want thanks other Blender developers for their help, advices and to be there always to help me, and specially to Clément Foucault, Dalai Felinto, Pablo Vázquez and Campbell Barton.
* Main windows show a topbar and statusbar, and select a workspace and
scene. They are created with Window > New Main Window.
* Child windows do not show a topbar or statusbar. These follow the
workspace and scene of their parent main window. Created with Window >
New Window or View > Duplicate Area into New Window.
* The purpose of this change is to support multi monitor setups where you
just want to put more editors on the other monitors. Without multiple
topbars and statusbars, working within a single workspace and scene.
Creating multiple main windows is intended to be a concious choice to
do different tasks in different workspaces and scenes.
* Note these changes do not currently affect how the operating system
treats the windows.
* When changing the workspace, the layout in all child windows changes.
This makes sense if we consider child windows to be just a way to
extend the main window across more monitors. In some case it may be
useful to keep the same layout though, we can add an option for this
depending on user feedback.
Make room for Alt-A to be used for de-select.
Discussed with artists in studio & @venomgfx,
- Use Ctrl-Space for animation.
- Use Ctrl-Tab to toggle manipulator.
- Remove mirror transform binding.
Operators ignored edges along the screen-layout bounds. They should've ignored
those along window bounds instead.
Although the global areas can not be joined/split, the adjacent areas can. So
the menu should still be shown.
Had to change the return value of area joining operator, so that an error report
can show up when trying to join over a global area edge. Think this is fine to
do, but you never know with such stuff.
Preferably we'd gray out the "Join Area" item in the menu when clicking on the
edge of a global area. Unfotunately the operator uses coordinates passed as
operator properties to find the right edge/areas, which we cannot access from
the poll callback.
Just like the top-bar, the status-bar can now be hidden/collapsed by dragging
its edge. We display a small line with the editor outline color then, so there
is something that can be dragged up to un-collapse the area again.
This collapsed state is not written to files yet.
