Based on feedback from Ton, I've recoded the way "PoseLibs" are implemented/exposed. Therefore, quite a bit of code has been changed to fit this in better.
Now, ANY ACTION can be a "PoseLib". A set of Markers which belong to the Action (it's taken a year, but they're finally back), are used to tag "poses" in the Action. These markers are shown using diamond-shaped blue icons (designed by Matt Ebb) in three shades - unselected/normal, selected, active.
Notes:
* Each Armature Object has an Action which acts as a PoseLib.
* Improved UI presented in buttons panel for this
-- added proper buttons for action assigning
-- renamed "Validate PoseLib" to "Auto-Sync PoseLib" (this option auto-tags poses based on keyframes found)
Like in the 3d-view, use the hotkeys:
* Shift-L to add a local marker
* Ctrl-Shift-L to rename a local marker
* Alt-L to delete selected local markers
Note: transforms, etc. are not currently available with these markers
== PoseLib Preview ==
Added a few features here:
* Left/Right-Arrow keys now change the poses too (previous and next respectively)
* Up/Down-Arrow keys also change the poses, but "jump" to a pose 5 steps away in their respective directions
This commit adds a missing initialization that caused "Toggle Link (f key)"
not to work properly in case a file with an existing selection status was
opened.
"A slightly late Christmas present for the Animators out there :-)"
This tool allows animators to store frequently used poses in an action, and be able to label those poses to help them retrieve them later. In a way, it acts as a glorified clipboard for poses.
One of the cool features with this is the ability to select which stored pose to use interactively in the 3d-view. Once a few poses have been stored in the PoseLib, simply use the "Ctrl L" hotkey to start previewing. Use the Mousewheel or the Page Up/Down keys to change poses, and confirm/cancel the preview in the same way as you do for transforms.
Usage Notes:
* Each Armature may get its own PoseLib. PoseLibs are simply actions with extra data, so they can get relinked.
* Manually editing actions used as PoseLibs is not a good idea, as some data may not be able to be found. Tools to automagically find poses in an action could be investigated...
* PoseLib will only apply/retrieve poses to/from selected bones
* A basic UI for this can be found in the "Links and Materials" panel. Most of the PoseLib tools are presented there.
Useful Hotkeys (also found in Pose->PoseLib menu):
* Ctrl L - interactively preview poses
* Shift L - add a new pose or replace an existing pose in the PoseLib with the current pose
* Ctrl Shift L - rename an existing pose in the PoseLib
* Alt L - remove a pose from the poselib.c
Cleaned up bad level calls for multires; moved most of multires functions to blenkern, where they should have been in the first place. Functionality of the tool is unchanged.
Reworked image / movie loading, to add the following features:
- Mute strip
- Lock strip (peach request :)
- Crop / Translate _before_ image rescaling
- N-keys editing of start, startofs, endofs, startstill, endstill
Added (currently disabled) data structures for
- proxy support
- strip blend modes (currently only "REPLACE" works, which always did :)
Planed:
- automatic FPS rescaling
- command keys to lock/mute a bunch of selected strips
(which would complete the peach request to lock tracks)
Caveats: now the N-keys dialog is four-tabbed. I think, we should move those
tabs into the panels dialog in the future...
Applying Stephan Kassemeyer's patch (#6750) to add a curve modifier for sculpting.
A few changes from the patch:
* The default curve is closer to the old behavior
* Fixed loading files already saved in sculpt mode
* Changed the interface; split the brush texture controls off into a third sculpt tab, and put the curve (and curve reset) into the Brush tab.
============================
- Strand render now has options to remove child strands as
the object's faces becomes smaller, in the Simplification
particle panel.
- "Reference Size" is the approximate size of the object on
screen, after which simplification starts.
- "Rate" is how fast strands are removed.
- "Transition" is the percentage of strands being faded out as
they are removed.
- Another "Viewport" option removes strands on faces that are
outside of the viewport. "Rate" again controls how fast these
are removed.
- Strand render in Blender Units now has an adjustable minimum
width. Below this minimum width, strands start fading out
instead of getting smaller.
=========
- The render and realtime button for the particle system modifier
and the enabled button for particles now work seperate again,
made a bad design decision to tie them together. Now with only
the render button and not realtime enabled it renders.
- Fix for bug #7948: particle mode crash while constraining axis.
- Fix for bug #7945: crash loading effector groups from an old file.
- Fix for bug #7942: crash for reactor particles emitting from particles.
This code adds a basic and simple skeleton generator.
Examples and links are in the wiki, docs will come eventually: http://wiki.blender.org/index.php/User:Theeth/skeletor
In a nutshell, select a vertex at the top of the head and press "Generate Skeleton". UI Panel is in the Editing buttons in Edit Mode, tooltips and semi-useful.
* Old files now get initialised with the correct scale. The wrong calculation was being used
* Added a new tool to Alt-S menu: "Apply Scale"
This tool causes all the keyframes in the active strip to be moved to their NLA-scaled times, the scale to be set to 1.0, and the frame ranges recalculated accordingly (to remove any nasty weird errors)
* Scale field now draws red when the action-range is < 1, and the tooltip in this case instructs the user how to fix this (by using "Apply Scale").
NLA-Strips now have a new setting: Scale.
It determines how much the action-range is scaled for each repeat, instead of the scaling being implicitly determined based on repeats + strip-length.
One of the instant benefits of this, is that when increasing the number of repeats, the strip length increases by the right amount. Thus, increasing the number of repeats retains a constant speed.
Hopefully we can prevent weirdly scaled actions this way. (i.e. 0.00001 frames long action * 10000 or so)
Todo:
- Transform code needs to be able to set the scale setting (it doesn't yet)
- Add a new option to "apply scaling", to fix up problems with old files that have really bad scaling. Situations when this is needed could get indicated in the interface too... (red background for "Scale" field?)
=========
- Fix crash in particle transform with the particle system not editable.
- Particle child distribution and caching is now multithreaded.
- Child particles now have a separate Render Amount next to the existing
Amount. The render amount particles are now only distributed and cached
at render time, which should make editing with child particles faster.
- Two new options for diffuse strand shading:
- Surface Diffuse: computes the strand normal taking the normal at
the surface into account.
- Blending Distance: the distance in Blender units over which to
blend in the normal at the surface.
- Special strand rendering for more memory efficient and faster hair and
grass. This is a work in progress, and has a number of known issues,
don't report bugs to me for this feature yet.
More info:
http://www.blender.org/development/current-projects/changes-since-244/particles/
- Library referencing didn't add the new local Ipo for constraints
- Proxy command didn't set the driver object in constraint ipo to be
the new proxy object.
=========
Bugfix for crash with disabling the particles system and saving/loading
files, the way it detected if the mesh had changed could not work correct.
- new option for Local Constraint Ipos did not set user counter in
Ipo at file reading, causing data to get lost (not saved).
- Driver feature: the channels "Loc X Y Z" now also use the result
of constraints, but transformed back into local space, as if it
was action X Y Z. Nice stuff for those who understand this...
it means you can drive something with a bone that has constraints.
modifier.c, BKE_modifier.h - flag for modifiers to say they use pointcache, also new func modifiers_usesPointCache
renamed //pointcache to //blendcache_blendfilename so blendfiles in the same dir dont conflict, and other to show this dir isnt limited to pointcache only (nodes way want to use this)
wizard_curve2tree.py - better defaults for pretty tree's
=============
A new "Selected to Active" option in the Bake panel, to (typically) bake
a high poly object onto a low poly object. Code based on patch #7339 by
Frank Richter (Crystal Space developer), thanks!.
Normal Mapping
==============
Camera, World, Object and Tangent space is now supported for baking, and
for material textures. The "NMap TS" setting is replaced with a dropdown
of the four choices in the image texture buttons.
http://www.blender.org/development/current-projects/changes-since-244/render-baking/
-> Constraint Influence Ipo now can be local, linked to constraint itself
You enable this in the IpoWindow header, with the Action icon to the left
of the Ipo Type menu. The button tooltips give the clue as well.
Tech note: the Ipo now can get directly linked to a constraint, and is
being called during regular pose constraint solving.
Actions (and drivers in actions) are being calculated *before* pose
constraint solving. Result of actions then is written in bones, which
then solves the entire pose.
This means you can have a driver on both the constraint, as on the action
channel for the constraint! Not that I'm going to debug that easily :)
Additional fix: Joshua added a copy/paste IpoCurve feature, but he broke
the functionality to be able to paste in an empty ipo channel. That now
works again
=========
- Fix for child particles disappearing with right mouse drag translation.
- Added partial cache updates for selection, should make it a bit faster.
=========
Merge of the famous particle patch by Janne Karhu, a full rewrite
of the Blender particle system. This includes:
- Emitter, Hair and Reactor particle types.
- Newtonian, Keyed and Boids physics.
- Various particle visualisation and rendering types.
- Vertex group and texture control for various properties.
- Interpolated child particles from parents.
- Hair editing with combing, growing, cutting, .. .
- Explode modifier.
- Harmonic, Magnetic fields, and multiple falloff types.
.. and lots of other things, some more info is here:
http://wiki.blender.org/index.php/BlenderDev/Particles_Rewritehttp://wiki.blender.org/index.php/BlenderDev/Particles_Rewrite_Doc
The new particle system cannot be backwards compatible. Old particle
systems are being converted to the new system, but will require
tweaking to get them looking the same as before.
Point Cache
===========
The new system to replace manual baking, based on automatic caching
on disk. This is currently used by softbodies and the particle system.
See the Cache API section on:
http://wiki.blender.org/index.php/BlenderDev/PhysicsSprint
Documentation
=============
These new features still need good docs for the release logs, help
for this is appreciated.
This is much nicer than subdivision by angle but is somewhat less intuitive for users.
Added Bucket arc iterator, removing a lot of weird duplicated code in skeleton generator.
- Seperated StripData into
StripData
TStripData
where StripData holds only image-filenames and TStripData holds
the working information needed for ImBuf caching.
=> Large drop in memory usage, if you used a lot of movie and meta strips.
=> Fixed bugs in "duplicate" on the way (imbufs where copied around without
taking reference counting seriously...)
=> Code is much cleaner now
- Added defines for TStripData->ok
Finally figured out, what the magic values ment and named them properly :)
- Got rid of Sequence->curelem.
Reason: very bad idea(tm) for multi threading with more than one render
thread. Still not there, but this was a real show stopper on the way.
Adding symetry detection (right now, only primary symetries and only used to determine bone orientation).
Fixing bugs (infinite loops) in length based subdivisions.
Adding number of post processing passes parameter
Support for using the axes of a different object as the line of mirror
symmetry for a mirror modifier. As a nice consequence, this allows
"clipping" to arbitrary planes in editmode.
A fun example of using a couple of mirror modifiers and an array
modifier to easily make a nice flower type model is here:
http://bebop.cns.ualberta.ca/~cwant/chocolateC05.blend
Patch by: Roland Hess (harkyman)
For example, a constraint can be sub-targeted at the 50% (or 31.2% or 85% etc.) point of its target bone, giving you enormous rigging flexibility and removing the need for complex contraptions to do such things as:
- A bone whose base slides only between to points on a rig (CopyLoc with a variable, animated subtarget point)
- Bones that attach to multiple points along another bone (CopyLocs, each with a different head/tail percentage)
- Bones that need to stretch to a point midway between specific spots on two other bones (old way: too crazy to mention; new way: stretch bone between points on end bones, then another stretch to the midpoint of the first stretch)
It is only used for the constraint types for which it is relevant: CopyLoc, TrackTo, StretchTo and MinMax, TrackTo, and Floor.
Notes:
- This is accessed by the Head/Tail number-slider.
- This value can be animated per constraint
- The old "Copy Bone Tail" option for the CopyLoc constraint has been automatically converted to 1.0 Head/Bone values for the affected constraints
- In the code, this value is in the bConstraint struct, so it is available for all constraints, even though only a few implement it.
====================
Dynamic binding support. This means that the mesh can move _within_
the cage and still deform correct. If the mesh goes out of the cage,
don't expect correct result. Must be enabled with the 'Dynamic'
option, because it is slower and consumes more memory.
This is useful to use e.g. the cage mesh for main deformations and
still have shape keys for facial deformation working.
This fixes up angle based subdivisions, adds embedding post processing methods (before, only average was there, added smooth and sharpen).
More parameters are controllable through the UI.
====================
The MeshDeform modifier can deform a mesh with another 'cage' mesh.
It is similar to a lattice modifier, but instead of being restricted
to the regular grid layout of a lattice, the cage mesh can be modeled
to fit the mesh better.
http://www.blender.org/development/current-projects/changes-since-244/modifiers/
Implementation Notes:
- OpenNL has been refactored a bit to allow least squares matrices to
be built without passing the matrix row by row, but instead with
random access. MDef doesn't need this actually, but it's using this
version of OpenNL so I'm just committing it now.
- Mean value weights for polygons have been added to arithb.c, a type
of barycentric coordinates for polygons with >= 3 vertices. This
might be useful for other parts of blender too.
Version patch for Constraints Refactor I was getting called for too many cases. This was noticeable in the way the StretchTo constraint got reset on loading.
The list of changes (some are fixes):
- Properly horizontally centered tags in all fields (bug?).
- File area does not have trailing space and has leading "File " at
start instead (probably a bug).
- Small separation between to time related fields, space saving.
- Removed colons, for consistency and space saving again.
- Frame field is zero aligned for higher visual stability.
- Marker name shows a rarer name, "<none>" (using <> is typical for cases
in which there is nothing: <none>, <empty>, <blank>, etc).
- Top area for misc info that can be really long (file, note and render date).
- Bottom area for more constantly changing but short ones (marker, SMPTE,
frame, camera and scene).
- Only render date moves a line (when note field is not used), and frame one
moves if no SMPTE (still in same line, so no big jump), for extra visual
stability (marker is fixed, assuming most people would show frame and or
SMPTE).
- ISO 8601 date format for render date, localization independant.
Comparision images:
http://www.infernal-iceberg.com/blender/stamp-original.pnghttp://www.infernal-iceberg.com/blender/stamp-cleanup.png
