Also replace integer with bool in Ghost API when only used as boolean, and replace uint8* with char* in Ghost API when variable is a string.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D11617
Now, The weight is used in the randomize parameters of the offset modifier.
This is useful to generate effects like explosions.
Related to the new Vertex Weight modifiers.
A point of confusion about this node is that it doesn't work on the
output of the mesh circle primitive node. This patch adds a warning to
help with that. This avoids adding a warning when the geometry set
input has no mesh.
Differential Revision: https://developer.blender.org/D11771
As noted in a comment now, these functions only update a cache, so they
don't change the logical state of the mesh, which is "it will have the
data when necessary." Using a const argument will help const correctness
when accessing an object's evaluated mesh.
This code was written for the File Browser together with the Asset Engine
design, that is not part of the Asset Browser/System design anymore. Updated
comments accordingly.
`FileDirEntryRevision` was actually used, but I removed it and moved the used
members to the parent `FileDirEntry`, since there is no concept of revisions
currently.
There should be no functional changes.
Add a new transformation space choice for bone constraints, which
represent the local transformation of the target bone in the constraint
owner's local space.
The use case for this is transferring the local (i.e. excluding the
effect of parents) motion of one bone to another one, while ignoring
the difference between their rest pose orientations.
The new option replaces the following setup:
* A `child` bone of the `target`, rotated the same as `owner` in rest pose.
* A `sibling` bone of the `target`, positioned same as `child` in rest
pose and using Copy Transforms in World Space from `child`.
* The `owner` bone constraint uses Local Space of `sibling`.
(This analogy applies provided both bones use Local Location)
Differential Revision: https://developer.blender.org/D9493
This constraint can be naturally viewed as a prototype for a future
4x4 matrix math node (or subset thereof), since its basic semantics
already is matrix assignment. Thus it makes sense to add math options
to this constraint to increase flexibility in the meantime.
This patch adds support for several operations that would be useful:
- An option to remove shear in the incoming target matrix.
Shear is known to cause issues for various mathematical operations,
so an option to remove it at key points is useful.
Constraints based on Euler like Copy Rotation and Limit Rotation
already have always enabled shear removal built in, because their
math doesn't work correctly with shear.
In the future node system shear removal would be a separate node
(and currently Limit Rotation can be used as a Remove Shear constraint).
However removing shear from the result of the target space conversion
before mixing (similar to Copy Rotation) has to be built into
Copy Transforms itself as an option.
- More ways to combine the target and owner matrices.
Similar to multiple Inherit Scale modes for parenting, there are
multiple ways one may want to combine matrices based on context.
This implements 3 variants for each of the Before/After modes
(one of them already existing).
- Full implements regular matrix multiplication as the most basic
option. The downside is the risk of creating shear.
- Aligned emulates the 'anti-shear' Aligned Inherit Scale mode,
and basically uses Full for location, and Split for rotation/scale.
(This choice already existed.)
- Split Channels combines location, rotation and scale separately.
Looking at D7547 there is demand for Split Channels in some cases,
so I think it makes sense to include it in Copy Transforms too, so that
the Mix menu items can be identical for it and the Action constraint.
Differential Revision: https://developer.blender.org/D9469
To some degree these are changes in preparation of further Asset Browser
related changes, see D11119. But also, the current UUID design was written for
the old Asset Engine design, which isn't part of the current Asset
Browser/System design anymore.
And lastly, "UUID" are a well established standard
(https://en.wikipedia.org/wiki/Universally_unique_identifier) which this
implementation didn't follow. What we have here is more of an index, or a
unique identifier (https://en.wikipedia.org/wiki/Unique_identifier).
So this does the following changes:
* Renames "UUID" to "UID"
* Changes the type of the UID to (a typedef'ed) `uint32_t`, which is more than
enough for our current asset system design and simplifies things.
* Due to the new type, we can avoid allocations for hash-table storage.
* Add/use functions for UID handling
Note that I am working on a major rewrite of the file-list code. Meanwhile we
want to keep things sensible.
his new modifier allows to generate weights base on:
* Angle of the stroke relative to object or world orientation. For example, if the value is 90, the maximum weights will be for vertical lines and minimum for horizontal lines.
* Distance to Target object. The distance calculated is normalized to get valid weights between 0 and 1.0.
The weights are created in an existing vertex group and the data can be replaced or mixed with the existing value to combine different weight effects. The minimum parameter, allows to define the minimum weight generated. This is useful to avoid very low weights.
The generated weights can be used in any modifier. For example, the angle weight value can be used to mimic FreeStyle Caligraphy modifier using the weight with the thickness modifier.
Also some modifier has been changed to inlude a new option to use the weights as factor of the effect.
As result of this change, the fading option has been removed from Thickness and Opacity modifiers because this can be done using the new modifier, it's not logic to repeat the same.
Reviewed By: mendio, filedescriptor
Differential Revision: https://developer.blender.org/D11604
Generally the evaluated mesh should not be changed, since that is the
job of the modifier stack. Current code is far from const correct in
that regard. This commit uses a const variable for the reult of
`BKE_object_get_evaluated_mesh` in some cases. The most common
remaining case is retrieving a BVH tree from the mesh.
In the Win32 platform our setTitle() can properly assign a Unicode
utf-8 window title. Unfortunately our getTitle() will only read regular
8-bit character strings. This means that we can never compare what we
set to what we get. This patch updates getTitle() to use Unicode-aware
GetWindowTextLengthW and GetWindowTextW.
see T88909 for an example of this affecting user experience.
Differential Revision: https://developer.blender.org/D11782
Reviewed by Ray Molenkamp
Handle width calculation was incorrect in drawing code. This caused
handles to be invisible when zoomed out.
After fixing math, handles become too large, so now they are constrained
to quarter of strip width, which feels more natural and represents
clickable area more closely.
`sequence_handle_size_get_clamped()` did not return size in pixels, but
in 2D-View space, this comment was corrected.
SeqCollection wasn't freed.
It wasn't easy to find culprit so added argument to
SEQ_collection_create() to pass function name.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11746
Address initial feedback:
- Use checkboxes instead of radio buttons
- Hide snapping distance control from UI
- Tweak snapping line color - use selected strip color, 50% transparency. Similar to other editors
- Draw 2px thick line, since strip outline is also 2px thick
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D11759
When multiple File or Asset Browsers would load at once (e.g. when loading a
file with two File Browsers open) and they would load multiple directories or
.blend files (using the Recursions option in the File Browser or loading an
asset library with multiple .blends), often only one File/Asset Browser would
correctly load all files. Others would be incomplete or entirely empty. That
was because of a race condition, where the directories or .blend files would be
loaded concurrently and the first one that finished would cancel the other
ones. This again happened because they used the job system with the same
"owner", which by design makes all jobs with the same owner cancel as soon as
the first is finished.
Address this by making sure they have different owners. That is, not the scene
anymore, but the filelist the job belongs to. Doesn't make much sense to use
the scene as owner for scene-unrelated file loading anyway.
Steps to reproduce were:
* Open two File Browsers as regular editors.
* In the Display Settings popover, set "Recursions" to 2 or 3 levels.
* Navigate to a directory with plenty of subdirectories in both File Browsers.
* Save the file.
* Reload the file, one of the File Browsers likely has an incomplete file list.
Alternatively, use Asset Browsers and open an asset library containing multiple
.blends.
This patch writes the timecode in the .srt file relative to the start
frame of the scene. If the timecode is global but scene does not start
at frame 0 the subtitles don't match if they get loaded in an external
video player. Muted strips will be ignored. Don't allow negative
timecodes in .srt.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11762
The error codes could be used to look up messages from a table
of messages however this wasn't especially useful.
Now all calls to BMO_error_raise must inclue a message.
Edit-mesh partial update logic assumed translate didn't need normals
to be recalculated (for faces with all vertices being transformed).
However translate can optionally rotate which requires
all transformed normals to be updated.
Check for this case and use the previous partial-update method
when it modified extra geometry, so the normals are properly reset.
Further updates need not recalculate them.
Supporting both object & edit-mode is more involved.
Both cases are now supported with object mode tracking the last-used
state for rotation so it's only reset once when rotation is disabled.
Normals now includes many functions including normal splitting &
custom normal manipulation split this into it's own file
to centralize related functions.
This node has two modes: the first mode computes a circle from three
locations and a resolution. The second takes radius and resolution.
The first mode also outputs the center of the computed circle as
a vector.
Differential Revision: https://developer.blender.org/D11650
This changes `UI_but_func_tooltip_set` so that it allows passing a custom free function, which has two benefits:
* The caller can pass `null` to indicate that the value should not be freed.
* Arbitrary c++ data can be passed to the callback (before the struct had to be trivially destructible).
I added `uiFreeArgFunc` and used it in other places where appropriate.
Differential Revision: https://developer.blender.org/D11738
Caused by {rBfba9cd019f21}.
Above commit reordered toolsettings snapping flags but missed remapping
these for the UV toolsettings in versioning code.
Differential Revision: https://developer.blender.org/D11756
Multi-threading support for transform modes: bevel-weight, crease,
push-pull, rotate, shear, shrink-fatten, skin-resize, to-sphere,
trackball & translate.
This is done using a parallel loop over transform data.
From testing a 1.5million polygon mesh on a 32 core system
the overall performance gains were between ~20-28%
To ensure the code is thread-safe arguments to shared data are const.
Reviewed By: mano-wii
Creates a Curve with 1 Bezier Spline from four positions (start,
start handle, end handle, end) and a resolution. The handles are
aligned and mirrored automatically. An "Offset" mode is also included
to allow specifying the handles relative to the control points.
The default settings recreate the existing default Bezier Curve in the
3D viewport add menu.
Differential Revision: https://developer.blender.org/D11648
Reserve the term count for values that require calculation
(typically linked lists).
Without this convention it's difficult to know if using a length
accessor function in a loop will be O(N^2) without inspecting the
underlying implementation.
This patch is for a node that creates a poly spline from a
3 point quadratic Bezier. Resolution is also specified.
Curve primitives design task: T89220
Differential Revision: https://developer.blender.org/D11649
This node creates a curve spline and gives control for the number of
rotations, the number of points per rotation, start and end radius,
height, and direction. The "Reverse" input produces a visual change,
it doesn't just change the order of the control points.
Differential Revision: https://developer.blender.org/D11609
This patch adds a Curve Primitives menu in Geometry nodes with an
initial entry of a star primitive.
The node is a basic star pattern node that outputs a poly spline.
Options control the inner and outer radius, the number of points,
and the twist of the valleys.
Differential Revision: https://developer.blender.org/D11653
Change snapping behavior to snap strip edges when they are close to snap point.
Default behavior is, that each transformed strip is snapped to any other strip.
Implement snapping controls in sequencer tool settings. These controls include:
- Snapping on/off
- Ability to snap to playhead and strip hold offset points
- Filter snap points by excluding sound or muted strips
- Control snapping distance
Snapping controls are placed in timeline header similar to 3D viewport
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11646
When using multiple monitors that differ in scale and/or dpi, the
varying sizes of the window titles and borders can cause the placement
of those windows to be out by a small amount. This patch adjusts for
those differences on Windows 10 and newer.
see D10863 for details and examples.
Differential Revision: https://developer.blender.org/D10863
Reviewed by Ray Molenkamp
`UILayout.operator_menu_enum()` now returns the operator properties, just like
`UILayout.operator()`. This makes it possible to set options for the operator
displayed in the menu. In C it can be done through the new
`uiItemMenuEnumFullO()` or `uiItemMenuEnumFullO_ptr()`.
It's reasonable to have this, probably just a small thing never bothered to
add. D10912 could use it, the following comment can be addressed now too:
https://developer.blender.org/diffusion/B/browse/master/source/blender/editors/space_nla/nla_buttons.c$583-586
This is just some cleanup of the Win32 window creation code. After
CreateWindowExW() this patch uses some early exits to replace some
potentially confusing if blocks. No functional changes.
Differential Revision: https://developer.blender.org/D11446
Reviewed by Ray Molenkamp
When compiling BSDF nodes, we only assing stack space to the normal and
tangent inputs if they are linked. However, it could be that the
ConstantFolder removed the link, so checking if there is a link fails
to take this into account.
To fix this, added a flag to ShaderInput to keep track of whether a
constant was folded into the input, and use it as well to verify that
the socket is linked when assigning stack space.
Reviewed By: brecht
Maniphest Tasks: T70615
Differential Revision: https://developer.blender.org/D11731
Mask value works just like transparency mask.
You are able to select intersection lines inside a
collection or, between collections.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D11309
Removed in b787581c9c as it's comment
noted it was bad code, the reason for it's necessity was no longer valid.
Add this back with comment explaining why it's still needed.
Use const arguments to simplify further optimizations.
Transforming elements shouldn't need to change their containers
data-structures.
ElementResize for grease pencil stroke thickness was
modifying TransInfo.num & TransInfo.values_final.
Now copies are operated on to preserve const correctness although
it's worth investigating if this can be avoided altogether.
- Added functions to check if the cursor is at a number.
- Added function to parse a number.
- Joined skip_separator functions.
- Added function to check if cursor is at any given set of characters.
AMD Drivers didn't report an additional space in the rendered. This made
testing for the HQ workaround fail and the issue appeared back on
certain cards.
This fix will test with surrounding spaces or if the renderer name
endswith the given string. If any of these are the case the hq normals
workaround will be enabled.
Fixing small typo of word "multi" in function identifier by renaming
"count_mutli_input_socket_links" to "count_multi_input_socket_links"
Differential Revision: https://developer.blender.org/D11732
Reviewed by Hans Goudey
This commit avoids duplicating the deformed control point
list twice by modifying the list in the object curve cache directly.
For curves, the original control point data was duplicated into a
local listbase, deformed, used to create the "bevel list" data, and
then duplicated again for the object-level storage of deformed
control points. Text objects and surface objects had a similar
unnecessary duplication.
The curve bevel list was freed, and then freed again in a call to the
function that recalulates it. The curve "anim path" data was freed
only to be freed again in its calculation function as well. Also move
the anim_path calculation directly after the bevel list creation to
make its requirements more explicit.
Surface objects were already handled by an early return in the main
"curve types" function. This commit splits them, renames the funtions
to match (and be more consistent with other names), and sanitizes the
checking of object types.
Every call to `BKE_displist_make_curveTypes` already checks the object
type beforehand, there is no need to check it again. Also removed an
outdated comment.
`BKE_displist_make_curveTypes` had a `for_orco` argument that was
always false in calls to the function. Removing it allows the curve
displist and modifier evaluation code to become simpler. There are
some related cleanups in rBdf4299465279 and rB93aecd2b8107.
Sometimes the current spline list isn't part of the original curve, like
when using the deformed control points, etc. This will be helpful in
the curve modifier stack.
While the const correctness of `ListBase` is quite limited, it's helpful
to have a way to retrieve the `Nurb` list from curve object data without
casting away const from the curve.
There is no longer a need to resize windows that are _already_ open,
since temporary windows can no longer take over the space used by other
already-open temporary windows. This primarily affects Preferences and
Render windows.
see D11721 for more details.
Differential Revision: https://developer.blender.org/D11721
Reviewed by Julian Eisel
Likely uncovered by 6c97c7f767, the actual mistake would be from
6942dd9f49.
The hacks to display text buttons for renaming in UI-Lists used the emboss of
the text button for handling logic. It relied on the emboss `NONE` but we also
introduced `NONE_OR_STATUS` with 6942dd9f49. Both values need to be treated
equally for the logic of this hack to work.
The change in `interface_layout.c` is actually not needed for this exact issue,
but it's the correct thing to do. There may actually be more cases where `NONE`
and `NONE_OR_STATUS` need to be treated equally. Something to be checked still.
Custom properties defined on objects are not accessible from the
attribute node when rendering a volume in Cycles. This is because
this case is not handled.
To handle it, added a primitive type for volumes in the kernel,
which is then used in the initialization of ShaderData and to
check whether an attribute lookup is for a volume.
`volume_attribute_float4` is also now checking the attribute
element type to dispatch to the right lookup function.
Reviewed By: #cycles, brecht
Maniphest Tasks: T87194
Differential Revision: https://developer.blender.org/D11728
Weird 'embedded for overrides' flag of embedded IDs (including ShapeKeys
in override context) was not properly cleaned up when making an override
fully local.
Reported by studio, thanks.
@jbakker should be backported to 2.93LTS if possible.
In ViewLayer view, overrides of excluded collections would then show one
level higher, due to bad handling of those excluded collection in draw
code.
Reported by studio, thanks.
@jbakker should be backported to 2.93LTS.
Passing `emboss=False`set `UI_EMBOSS_NONE` in the layout, which
completely disables button background colors for things like animation
state. This commit changes that to `UI_EMBOSS_NONE_OR_STATUS`,
which effectively restores the behavior to what it was prior to the
addition of that flag, with the added option to completely disable
the status emboss with `UI_EMBOSS_NONE`.
This adds a new Attributes panel in the mesh properties editor.
It shows a list of all the generic attributes on the mesh.
In the future, we want to show built-in and other attributes in the
list as well. Related technical design tasks: T88460, T89054.
There is also a new simple name collision check that warns the user
when there are multiple attributes with the same name. This can be
problematic when the attribute is supposed to be used in geometry
nodes or during rendering.
Differential Revision: https://developer.blender.org/D11276
This was a stupid mistake in my original commit that added this item.
While this is an API breakage, the name is simply wrong, and it is only
6 months old, and slightly niche.
Differential Revision: https://developer.blender.org/D11701
This patch adds a function where you can specify occlusion effectiveness from 0 to 255 layers per face for a given mesh material.
Reviewed By: Sebastian Parborg (zeddb)
Ref D11308
Offset rays from the flat surface to match where they would be for a smooth
surface as specified by the normals. In the shading panel there is now a
Shading Offset (existing option) and Geometry Offset (new).
The Geometry Offset works as follows:
* 0: disabled
* 0.001: only terminated triangles (normal points to the light, geometry
doesn't) are affected
* 0.1 (default): triangles at grazing angles are affected, and the effect
fades out
* 1: all triangles are affected
Limitations:
* The artifact is still visible in some cases, it could be that some quads
require to be treated specifically as quads.
* Inconsistent normals cause artifacts.
* If small objects cast shadows to a big low poly surface, the shadows can
appear to be in a wrong place - because the surface moved slightly above
the geometry. This can be noticed only at grazing angles to light.
* Approximated surfaces of two non-intersecting low-poly objects can overlap
that causes off-the-wall shadows.
Generally, using one or a few levels of subdivision can get rid of artifacts
faster than before.
Differential Revision: https://developer.blender.org/D11065
* Reduce code duplication.
* Give methods more standardized names (e.g. `move_to_initialized` -> `move_assign`).
* Support wrapping arbitrary C++ types, even those that e.g. are not copyable.
* Use unsigned integer types for bit operations.
* Use 64 bit integer instead of 32 bit.
* Support scoped enumes (aka `enum class`) by adding some more casts.
The crash was caused by a mistake in 5f9677fe0c
where the pointers to the custom data layers would be overwritten with the one
for the first layer, as CustomData_duplicate_referenced_layer is only about the
first layer. customData_duplicate_referenced_layer_index should be used instead
to duplicate the right layer.
Old implementation has a single parser of many different
formats. With the introduction of Vulkan this would lead
to another parser in the same function. This patch
separates the log parsing using a visitor pattern so the
log parsing can be configured per GPU backend or even
per driver.
With Vulkan we manage the compiler our self so the parsing
will become more straight forward. The OpenGL part depends
on many factors (OS, Driver) and perhaps even GPU.
This patch is part of: T87228.
Support accurate random selection for:
- CURVE_OT_select_random
- LATTICE_OT_select_random
- OBJECT_OT_select_random
Ref D11685
CollectionLineart does not care about the configurations
in master collection.
Other options are not applicaple for master collection as well.
Hence hiding it.
Reviewed by Dalai Felinto (dfelinto)
Differential Revision: https://developer.blender.org/D11702
This option allow users to see the view layer in context to the
others. It is particularly useful to see which view layers have which
collections enabled, and their render settings (holdout, ...).
This option is off by default.
Differential Revision: https://developer.blender.org/D11708
In preparation of supporting vulkan. Draw/GPU tests should use
GPU_TEST or DRAW_TEST macros. These macros will run the test
on available drawing context backends like OpenGL or Vulkan.
As in master there is only an OpenGL backend nothing changed.
The problem was an optimization I put in to triangulate quads.
It was wrong if the quad, after projecting onto a 2d plane, was
not convex. Handling quads the same as other faces fixes the bug.
Unfortunately, this will slow down Exact Boolean when the input has
many quads (the usual case, of course).
Will attempt to fix that with a later change, but for now, this
at least restores correctness.
Now, the mask layers are copied and later a cleanup is done in order to verify all mask layer exist in destination object. If the layer mask does not exist, it's removed from the list.
This is related to T89234.
Skip updating normals & tessellation for contiguous geometry regions
for operations such as translate & uniform scale.
This means when all geometry is selected, no updates are needed
as the relative locations of vertices aren't being modified.
Performance:
As this is skipping a multi-threaded operation,
larger improvements are noticeable on systems with fewer cores.
- ~1.15x to ~1.3x overall gain for 32 cores.
- ~1.7x to ~2.2x overall gain for 1 core (limited using `-t 1` argument).
Details:
- Rotate & non-uniform scale only skip tessellation.
- Proportional editing and axis-mirror have special handling
ensure geometry is properly grouped before considering
a face part of a single group that can be skipped.
- Loose vertices always need their normals to be recalculated
since they're calculated based on the location.
- Non-affine transform operations such as shrink-fatten & bend,
don't take advantage of this optimization.
- Snap projection also disables the optimization.
editor dataset region always showed 0. This was caused by a conditional
statement that needed a domain to be set, which is not the case for
Instances component type.
Reviewer: Hans Goudey (Hoogly Boogly)
Differential Revision: https://developer.blender.org/D11710
This patch enables sample filtering when scaling preview images in File
Browser, improving the result a bit. Reduces blockiness and other
artifacts when enlarging the images.
see D11706 for details and examples.
Differential Revision: https://developer.blender.org/D11706
Reviewed by Julian Eisel
`t->values` does not necessarily represent a final value of the
transformation, as each mode treats this value differently.
So, unfortunately, we cannot have a generic offset solution for modal
transform operations. Offset needs to be handled by each mode.
Note: Currently only, `Move`, `Rotate` and `Resize` support this.
When baking some data, we create a new Mesh with edits and modifiers applied.
However, in some cases (e.g. when there is no modifier), the returned Mesh is
actually referencing the original one and its data layers. When autosmooth is
enabled we also split the Mesh. However, since the new Mesh is referencing the
original one, although `BKE_mesh_split_faces` is creating new vertices and edges,
the reallocation of the custom data layers is preempted because of the
reference, so adding the new vertices and edges overwrites valid data
To fix this we duplicate referenced layers before splitting the faces.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D11703
User can specify filtering options inside line art modifier,
like inverting selection and including face mark region border.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D11307
This patch adds a left aligned sidebar to the spreadsheet editor. This
Sidebar can be used to navigate the geometry component types and
attribute domains. It also provides a quick overview of domain sizes.
It replaces the two dropdowns in the regions header.
Next step will be to add the domain cycling shortcut
using the CTRL + mouse wheel.
Reviewer: Dalai Felinto (dfelinto), Julian Eisel (Severin),
Hans Goudey (HooglyBoogly).
Differential Revision: https://developer.blender.org/D11046
This patch includes: Floating edge type support,
Special chaining option for floating edge,
Chaining option for reducing jagged edges when floating
edges are involved.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D11306
* Mark either all or no class methods with override
* Don't use zero sized array since it has a different size in C and C++.
Using a little more memory here is not significant.
* Don't use deprecated mechanism to mark private GSet members in clang
just like we don't for MSVC, it warns even for simple zero initialization.
In-progress Safari download files/packages are now recognized as bundles
and therefore not treated as directories.
Differential Revision: https://developer.blender.org/D11613
This resolves a bottleneck where every update while transforming
copied the entire mesh data-block, which isn't needed as the edit-mesh
is the source of the data being edited.
Testing shows a significant overall speedup when transforming:
- ~1.5x with a subdivided cube 1.5 million vertices.
- ~3.0x with the spring mesh (edit-mode with modifiers disabled,
duplicated 10x to drop performance).
Reviewed By: sergey
Ref D11337
Avoid computationally expensive copying operations
when only some settings have been modified.
This is done by adding support for updating parameters
without tagging for copy-on-write.
Currently only mesh data blocks are supported,
other data-blocks can be added individually.
This prepares for changing values such as edit-mesh auto-smooth angle
in edit-mode without duplicating all mesh-data.
The benefit will only be seen when the user interface no longer tags
all ID's for copy on write updates.
ID_RECALC_GEOMETRY_ALL_MODES has been added to support situations
where non edit-mode geometry is modified in edit-mode.
While this isn't something user are likely to do,
Python scripts may change the underlying mesh.
Reviewed By: sergey
Ref D11377
Very stupid typo in override apply code on GP modifiers (typical
copy/paste mistake from original modifiers code).
@jbakker this should be back-ported to 2.93LTS.
This patch enables bound box check when loading geometry
into line art. Works with overscan as well. Will discard
object if its bbox completely lies in one side of the
clipping space frustum.
Reviewed by: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D11545
For scenes that have a lot of edges, this could potentially
save some time generating individual strokes that are outside
camera frustum.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D11525
682a74e090 renamed Bendy Bones properties and replaced existing float
properties with float-vector properties. This updates the property names used
by the action baking operator (`NLA_OT_bake`).
Iteration was incorrectly calling the same object. Had it called every
window it would still be unnecessary as WM_DISPLAYCHANGE is sent to all
broadcast receiving windows.
Previously the smooth shading of the voxel remesher was controlled by a
mesh property. With this change, the output will try to match the
current shading of the object. This only takes into consideration the
shading mode of the first polygon of the model, but it is probably what
most users expect as it works as intended with the shade smooth/flat
object mode options.
Reviewed By: JulienKaspar, JacquesLucke
Differential Revision: https://developer.blender.org/D11626
SCULPT_nearest_vertex_get expects a distance, not a distance squared.
This should make symmetry work as expected, but it still can fail if the
mesh topology is not completely symmetrical.
Reviewed By: JacquesLucke
Maniphest Tasks: T89221
Differential Revision: https://developer.blender.org/D11642
Adds full frame implementation to this node operations.
No functional changes.
1.2x faster than tiled fallback.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11638
Adds full frame implementation to Image node operations.
Mostly refactored into buffer utility methods for reuse in other
operations.
No functional changes.
1.8x faster than tiled fallback.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11559
When use smooth tool in a cyclic stroke, the smoothing algorithm was not using the adjacent points if these are the end or start of stroke.
Now, the smooth uses the other extreme of the stroke to compute smoothness.
This change will ensure at least one 'local' collection can host the new
'local' override of all objects (indirectly) overridden by this
operation, such that no new override of object ends up in master
collection (which can become extremely messy in production files).
In practice, it means often at least one of the linked collection owning
those objects also has to be overridden.
NOTE: This only affect cases where root overridden linked object has
some dependencies outside of its own root linked collection. While this
situation should be avoided, it cannot always be, so we try to support
it as best as we can.
This is again in the fuzzy area of how embedded IDs are handled
respectively by partial undo code and depsgraph... Should not be
necessary currently, but better be safe and explicit, and also tag
those embeded IDs from re-used owner ID.
In certain CMake configurations it was possible
that OCIO gave linker errors due to it thinking
it was using the shared library rather than the
static library we ship.
Would crash when adding or removing a collection directly to the master
collection of a scene.
Consequence of change to handle depsgraph-controlled evaluation of some
IDs (like excluded collections which do not get evaluated and do not get
a COW anymore). See rBcf4258673755 and D10907.
Note that this mostly demonstrates once again how weak and flacky our
handling of embedded IDs still remains, with some part of the code
handling them as independent IDs, some as fully local/private data, some
as a mix of both... and lots and lots of custom handling code and corner
cases that are a bottomless pit of issues.
Also quiet incredible that this was not reported already, luckily this
original change did not make it to 2.93 release.
The check on the transformation introduced in rBb313525c1bd0 to fix
T88515 would sometimes prevent to update the light if the Blender object
changed. To fix this, reverse the order in which the checks happen so
that we do not shortcuit the object change check.
Note that this commit uses a second LogRef (`blo.readfile.undo`) for undo
specific meassages. Allows to use `--log "*undo*"` cli option to match
all undo reporting.
Also did some minor tweaks to some reports on the way.
Those were missing proper (explicit) object cache clear, and DEG
tagging.
Note that this was most likely not an common issue in practice (Collection
object cache clearing recursively goes into all parents, so master
collection would only miss it in case they had no child collections at
all, and tagging of those happens almost always at other steps on
remapping). But better to be explicit and consistent here in any case.
Fix T88808.
Caused by {rB5f2c5e5bb8c15bf0d6679351e3482f9c38c00935}
object type for `TEXT object` was missing in following check
that's why `Set Origin` option was lost from object context menu.
Reviewed By: lichtwerk
Maniphest Tasks: T88808
Differential Revision: https://developer.blender.org/D11495
This reverts commit rB3a48147b8ab92, and fixes the issues with linking
etc.
Change compared to previous buggy commit (rBf8d219dfd4c31) is that
new `BlendFileReadReports` reports are now passed to the lowest level
function generating the `FileData` (`filedata_new()`), which ensures
(and asserts) that all code using it does have a valid non-NULL pointer
to a `BlendFileReadReport` data.
Sorry for the noise, it's always when you think a change is trivial and
do not test it well enough that you end up doing those kind of
mistakes...
Fix by reverting the part of ec30cf0b74
that assigned `but->editval` in `ui_numedit_begin_set_values`.
Causing access freed memory when using tab to switch
to a numeric input and then leaving the textbox by clicking outside.
This was because `ui_numedit_begin_set_values` shouldn't need to set
`but->editval` and overwrite the pointer.
This would set a pointer that had previously been freed,
causing a `NULL` check to fail later on.
Ref D11679
When cut a stroke of 1 point, the clean up done to avoid keep 1 point strokes removes the memory, but the pointer to the first stroke was not set to NULL. As this pointer is invalid now, any use of this produces a segment fault because the pointer is corrupted..
Sphinx has rather loose dependency requirements which can cause issues if we aren't careful.
As a solution they recommend that you pin sphinx dependency versions
Currently the emboss is only fading on left side of the widget,
resulting in the emboss extending vertically on the right side
and ending abruptly. This patch fixes this by also fading the
emboss on the right side and making it symmetric.
Differential Revision: https://developer.blender.org/D10810
This fixes T88346.
The code is also more readable by making a better distinction between
the texts used for Distances, "Proportional Size" and "AutoIK-Len".
And the text used to translate the "Proportional Size" is reused.
This patch fixes many minor spelling mistakes, all in comments or
console output. Mostly contractions like can't, won't, don't, its/it's,
etc.
Differential Revision: https://developer.blender.org/D11663
Reviewed by Harley Acheson
This problem has surprisingly been there for quite a few months.
For point clouds all attributes were handled the same, even "position",
which should be transformed when combining source points into the
destination.
Previously the code assumed that curve instances had no attributes.
This is true when the data came from curve objects, which don't support
attributes currently, but it isn't necessarily true when retrieving curves
from evaluated geometry sets.
Make the virtual functions protected and simpler, so that the logic is
better contained in the base class's implementation. Also introduce a
`copy_without_attributes` method to be used for realizing instances.
Add direct user feedback (as a warning report) to user when recursive
resync of overrides was needed.
And some timing (as CLOG logs) about main readfile process steps.
This is essentially adding a new BlendFileReadReport structure that wraps
BKE_reports list, and adds some extra info (some timing, some info about
overrides and (recursive) resync, etc.).
Allows to decompose a given amount of seconds into a random set of
days/hours/minutes/seconds/milliseconds values.
Also add matching test.
Differential Revision: https://developer.blender.org/D11581
Delay depsgraph visibility update tagging until it is known that
graph relations are up to date, and until it is known that the graph
is actually needed to be evaluated.
Differential Revision: https://developer.blender.org/D11660
Currently, the OptiX BVH build options are selected based on whether
we are in background mode (final renders) or not (viewport renders).
In background mode, the BVH is built for fast path tracing and low
memory footprint, while in viewport, it is built for fast updates.
However, on platforms without OpenGL support, the background flag is
always set to true and prevents using fast BVH builds in the viewport.
Now, the BVH options derive from the Scene BVH settings:
* if BVH is static, a fast to trace BVH is built
* if BVH is dynamic, a fast to update BVH is built
Reviewed By: #cycles, brecht
Differential Revision: https://developer.blender.org/D11154
Apply the same fix for T32214 (edge-select failing) to bones
which also failed when their end-points were outside of the view.
- Add V3D_PROJ_TEST_CLIP_CONTENT support for edit & pose bone iterator
and use for selection operators.
- Remove unnecessarily complicated checks with pose-mode lasso tagging.
- Correct error in pose-mode LassoSelectUserData.is_changed
(currently harmless as it's not read back).
`src` and `dst` are perfectly clear, and avoid repeating unecessary
characters when writing the variables many times, allowing more space
for everything else.
When CMake detects and incompatible Python version
it errors out with an error saying at-least python 3.9
is required, but doesn't mention the version it detected.
This makes troubleshooting the problem harder than it
needs to be.
This diff changes the error message to include the python
version CMake detected.
Differential Revision: https://developer.blender.org/D11666
Reviewed By: Ray Molenkamp
This adds preliminary VS 2022 support, since
there currently is no CMake version that
supports the VS2022 IDE only ninja support
was tested.
IDE support should work without any additional
changes as soon as an updated CMake becomes
available.
As VS2022 appears to keep binary compatibility
with earlier MSVC versions, the current SVN
libraries will work for this version.
This commit optimizes the node for the case where it works on many
splines by allowing it to generate mesh data from their combinations
in parallel. By itself, this made the node around twice as fast in my
test file with a result of 20 million vertices, around 600ms instead of
1.2s before.
That isn't actually a very good result; it reveals another bottleneck,
a single threaded loop over all face corners in the mesh normal
calculation code. As a simple change that might improve performance
in some situations, this commit moves normal calculation out of this
node, so at least the work isn't wasted if the mesh is changed later
on in the node tree anyway.
The depth cache (located in `RegionView3D::depths`) is used for quick
and simple occlusion testing in:
- particle selection,
- "Draw Curve" operator and
- "Interactive Light Track to Cursor" operator,
However, keeping a texture buffer in cache is not a recommended practice.
For displays with high resolution like 8k this represents something
around 132MB.
Also, currently, each call to `ED_view3d_depth_override` invalidates
the depth cache. So that depth is never reused in multiple calls from
an operator (this was not the case in blender 2.79).
This commit allows to create a depth cache and release it in the same
operator. Thus, the buffer is kept in cache for a short time, freeing
up space.
No functional changes.
This patch uses threading to flush selection from verts to edges and
from edges to faces. The solution is lockless and should scale well on
modern CPU architectures.
Master:{F10185359}
Patch:{F10185361}
End user performance went from 3.9 to 4.6 FPS (Stanford Dragon) but that
was measured on a Intel Core i7-6700 CPU and AMD RX480 Gpu. The more
cores the better improvements you get.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11644
This resolves a long standing bug in edge selection
(picking, circle, box & lasso).
Now when one of the edges vertices fails to project into screen space,
the edge is clipped by the viewport to calculate an on-screen location
that can be used instead.
This isn't default as it may be important for the on the screen location
not to be clipped by the viewport.
Adds two new output modes to the CDT api which detect and remove
holes. A hole is a face from which a ray shot to the outside
intersects an even number of constraint edges, except we don't
count constraint edges in the same connected region of faces,
where a region is connected via non-constraint edges.
These modes are useful for filling in outlines meant to represent
text characters and the like.
Original patch was from Erik Abrahamsson, modified by me to work
with the "valid Bmesh" output type too. I also added tests
for the new modes.
Caused by improper testing on my part, assuming a helper function
existed in the industry compatible keymap file, and also assuming it
also used the N and T keys for the left and right side-regions.
A different data structure / implementation is used for curves in the
node tree currently. Converting from the DNA `Curve` structure to this
wasn't slow, but it's nice to decrease overhead. In a test of 14000
splines with 128000 points, this halves the runtime from about 5ms
to about 2.5ms.
The spreadsheet filter tried to apply the mesh selection filter on non-
mesh geometry components. Add a check for the component type,
and also refactor the function to be more easily readable.
The normals were broken because the normal calculation mode wasn't set.
This patch adds a default normal mode so all code creating a spline does
not necessarily have to set it manually. In the future there should be a
way to change this value in the node tree.
- Multi-thread BKE_mesh_recalc_looptri.
- Add BKE_mesh_recalc_looptri_with_normals,
this skips having to calculate normals for ngons.
Exact performance depends on number of faces, size of ngons and
available CPU cores.
For high poly meshes the isolated improvement to BKE_mesh_recalc_looptri
in my tests was between 6.7x .. 25.0x, with the largest gains seen in
meshes containing ngons with many sides.
The overall speedup for high poly meshes containing quads and triangles
is only ~20% although ngon heavy meshes can be much faster.
Remove `seq->tmp` usage from transform code. It was used to tag strips
that need to be "shuffled". Pass these strips in `SeqCollection`
instead.
Reviewed By: sergey, mano-wii
Differential Revision: https://developer.blender.org/D11631
This patch adds support for filtering rows based on rules and values.
Filters will work for any attribute data source, they are a property
of the spreadsheet rather than of the attribute system. The properties
displayed in the row filter can depend on data type of the currently
visible column with that name. If the name is no longer visible, the
row filter filter is grayed out, but it will remember the value until
a column with its name is visible again.
Note: The comments in `screen.c` combined with tagging the sidebar
for redraw after the main region point to a lack of understanding
or technical debt, that is a point to improve in the future.
**Future Improvements**
* T89272: A search menu for visible columns when adding a new filter.
* T89273: Possibly a "Range" operation.
Differential Revision: https://developer.blender.org/D10959
This code was disabled in 2.8 and all other associated code/comments
have been removed/cleared. These rna properties have been replaced with
`seq_prev_type`
Removal of unused local variable. Calculation of underline thickness
no longer needed with change to text output of underscore character.
Introduced in aee04d4960
Differential Revision: https://developer.blender.org/D11641
Currently B-Bone scaling can only be controlled via their
properties, thus requiring up to 8 drivers per joint between
B-Bones to transfer scaling factors from the handle bone.
A Scale Easing option is added to multiply the easing value
by the Y scale channels to synchronize them - this produces a
natural scaling effect where both the shape of the curve and
the scale is affected.
In addition, four toggles are added for each handle, which
multiply each of the X, Y, Z and Ease values by the matching
Local Scale channel of the handle bone, thus replacing trivial
drivers. The Scale Easing option has no effect on this process
since it's easy to just enable both Length and Ease buttons.
Differential Revision: https://developer.blender.org/D9870
Implement actual behavior for the B-Bone Y Scale channels added
to DNA and UI in the previous commit in addition to the existing
X and Z Scale inputs.
The two length scale inputs control the ratio between the lengths
of the start and end segments of the bone: although for convenience
two inputs are provided, the whole chain is still uniformly scaled
to fit the curve.
Differential Revision: https://developer.blender.org/D9870
In addition to the base bone transformation itself, B-Bones have
controls that affect transformation of its segments. For rotation
the features are quite complete, allowing to both reorient the
Bezier handles via properties, and to control them using custom
handle bones. However for scaling there are two deficiencies.
First, there are only X and Y scale factors (actually X and Z),
while lengthwise all segments have the same scaling. The ease
option merely affects the shape of the curve, and does not cause
actual scaling.
Second, scaling can only be controlled via properties, thus
requiring up to 6 drivers per joint between B-Bones to transfer
scaling factors from the handle bone. This is very inefficient.
Finally, the Z channels are confusingly called Y.
This commit adds a B-Bone Y Scale channel and extra B-Bone flag
fields to DNA with appropriate versioning (including for F-Curves
and drivers) in preparation to addressing these limitations.
Functionality is not changed, so the new fields are not used
until the following commits.
Differential Revision: https://developer.blender.org/D9870
When drawing mnemonic underlines for hotkeys, use text output of
underscore character instead of direct drawing a line. Otherwise these
are not visible in dialog buttons.
Introduced in 0fcc063fd9
Differential Revision: https://developer.blender.org/D11641
Reviewed by Campbell Barton
Using an ampersand here is more semantically correct. A slash indicates "or" while an ampersand indicates "and".
An ampersand here is best because the view type shows both the Sequencer and the Preview.
When having multiple materials in a mesh the triangles are sorted based
on material index. This sorting is done single threaded, but needs two
loops over the data. One to count the bucket size and the second one to
add the triangles to the right position in the buckets.
This patch will do the counting in a multithreaded approach that would
speed up the cache creation. It has been measured that this part is the
most blocking part of the cache creation.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11615
During selections the total selection is refreshed at the end. This
process was done single threaded. This patch will do a parallel iter
approach.
Master: 0.043612s Threaded 0.017964s.
Master: {F10179586}
This patch: {F10179587}
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11622
`ED_fileselect_get_asset_params` would only return actual data pointer
when file browser is in ASSET mode.
Calling that whole section only makes sense if filebrowser is in asset
mode anyway.
Regression introduced in rBf6c5af3d4753 I think.
@Severin committing this fix now as this is a fairly critical bug for
the studio, feel free to revert and do proper fix if this one is not the
best solution.
This patch ensures that selection mode flushing updates total selection
counts internally. This reduces recounting when we are sure that the
input total selection counts were up to date.
For example for circle selection the total selection counts were
correct. But during flushing the selection could have been changed and
therefore the selection was always recounted.
This increased the performance on selected system from 6.90 FPS to 8.25
FPS during circle selection operations.
Before: {F10179981}
After: {F10179982}
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11647
When an object, whose mesh gets loaded from Alembic, gets animated in
Blender and the Alembic CacheFile datablock also gets animated, editing
keyframes causes both datablock to be re-copied for evaluation. This
caused a threading issue and a double-free of some memory. This is fixed
by expanding the scope of the spin lock in
`BKE_cachefile_reader_free()`.
Contributed by @erik85 in D11400. The idea from this patch was placed in
a more generic context: A new FOR macro has been added that loops
over the neighbors of a cell within a given radius.
This matches BMesh which also has tessellation in it's own file.
Using a separate file helps with organization when
extracting code into smaller functions.
The //Raycast// node intersects rays from one geometry onto another.
It computes hit points on the target mesh and returns normals, distances
and any surface attribute specified by the user.
A ray starts on each point of the input //Geometry//. Rays continue
in the //Ray Direction// until they either hit the //Target Geometry//
or reach the //Ray Length// limit. If the target is hit, the value of the
//Is Hit// attribute in the output mesh will be true. //Hit Position//,
//Hit Normal//, //Hit Distance// and //Hit Index// are the properties of the
target mesh at the intersection point. In addition, a //Target Attribute//
can be specified that is interpolated at the hit point and the result
stored in //Hit Attribute//.
Docs: D11620
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D11619
This node creates splines with more control points in between the
existing control points. The point is to give the splines more
definition for further tweaking like randomization with white noise,
instead of deforming a resampled poly spline with a noise texture.
For poly splines and NURBS, the node simply interpolates new values
between the existing control points. However, for Bezier splines,
the result follows the existing evaluated shape of the curve, changing
the handle positions and handle types to make that possible.
The number of "cuts" can be controlled by an integer input, or an
attribute can be used. Both spline and point domain attributes are
supported, so the number of cuts can vary using the value from the
point at the start of each segment.
Dynamic curve attributes are interpolated to the result with linear
interpolation.
Differential Revision: https://developer.blender.org/D11421
The minimum twist mode is important because it allows creating
normals without sudden changes in direction. The disadvantage
of minimum twist normals is that the normals depend on all control
points. So changing one control point can change the normals
everywhere. The computed normals do not match the existing
code exactly, although they do match quite well on non-cyclic and
on some cyclic curves. I also noticed that the existing implementation
has some fairly simple failure cases that I haven't found in the new
implementation so far.
Differential Revision: https://developer.blender.org/D11621
This makes the parts where a node is locked more explicit. Also, now the thread
is isolated when the node is locked. This prevents some kinds of deadlocks
(which haven't happened in practice yet).
- BKE_mesh_copy_parameters_for_eval to be used for evaluated meshes only
as it doesn't handle ID user-counts.
- BKE_mesh_copy_parameters is a general function for copying parameters
between meshes.
Refactor function `freeSeqData` so it is readable.
One strip can have multiple transform operations defined. To prevent
processing strip multiple times, build `SeqCollection` and use
sequencer iterator instead of iterating `TransData` directly.
No functional changes.
Differential Revision: https://developer.blender.org/D11618
Reduce complexity of sequencer transform code by removing recursivity.
This is possible by treating meta strips (mostly) as any other strip and
containing all transform code within SEQ_ functions.
Unfortunately internally meta strips still require special treatment,
but all complexity from code all over transform code seems to be
possible to contain within one function.
Functional change:
Previously adjusting handle of single image strip moved animation.
Now animation is not moved, which is behavior for all other strips.
Reviewed By: sergey, mano-wii
Differential Revision: https://developer.blender.org/D11493
Starts scrolling when dragging a node or node link and going outside the current window.
Largely copied from the VIEW2D_OT_edge_pan operator.
Edge panning operator customdata and supporting functions now in
UI_view2d.h, so they could be used by operators in other editor
libraries. The VIEW2D_OT_edge_pan operator also uses this customdata and
shared functions now. Operators properties can be used to configure
edge panning margins and speed for each use case, rather than using
hardcoded values.
The speed function for edge panning has been tweaked somewhat:
* "Speed per pixel" has been replaced with a "speed ramp" distance.
This is more intuitive and also creates an upper bound for the speed,
which can otherwise become extreme with large cursor distance.
* "Max speed" is reached at the end of the speed ramp.
* Padding the region inside and outside is applied as before, but both
values are operator properties now.
Node transform operator also supports edge panning. This requires
an offset for changes in the view2d rect, otherwise nodes are "stuck"
to the original view.
Transform operator had cursor wrapping categorically enabled, but this
gets quite confusing with the edge scrolling mechanism. A new TransInfo
option T_NO_CURSOR_WRAP has been introduced to disable this behavior.
The double negative is a bit annoying, but want to avoid affecting the
existing transform modes, so by default it should still set the
OP_IS_MODAL_GRAB_CURSOR flag (which then sets the WM_CURSOR_WRAP_XY
flag during modal execution).
Reviewed By: HooglyBoogly, JacquesLucke
Differential Revision: https://developer.blender.org/D11073
This allows line art to run only once for each modifier stacks,
with an option to toggle a specific line art modifier should
use cache or re-do their own calculations.
Reviewed By: Sebastian Parborg (zeddb), Hans Goudey (HooglyBoogly)
Differential Revision: https://developer.blender.org/D11291
This makes it easier to use task isolation in c++ code.
Previously, one either had to check `WITH_TBB` (possibly indirectly
through `WITH_OPENVDB`) or one had to use the C function which
is less convenient.
This namespace groups threading related functions/classes. This avoids
adding more threading related stuff to the blender namespace. Also it
makes naming a bit easier, e.g. the c++ version of BLI_task_isolate could
become blender::threading::isolate_task or something similar.
Differential Revision: https://developer.blender.org/D11624
Similar to what we do for constraints and modifiers, except that
currently adding or editing shaderfx in liboverride objects is
completely unsuported.
Fix T88974.
Used to detect if a shaderfx is purely local, or comes from linked data,
in case of a liboverride.
Not actually used yet since we do not currently support adding
shaderfx's to overrides, but will be in the future, and matches
constraints and modifiers code.
Mainly:
* Make `ED_operator_object_active_editable_ex` properly report poll
messages on failure.
* Add `ED_operator_object_active_local_editable_posemode_exclusive` for
bone constraints requiring pure local Object (non-override one).
* General cleanup and adding more poll messages on failures.
On selecting a multi-layer image with a combined pass, a "Combined"
socket is created and default combined pass socket "Image" is
disabled by setting `SOCK_UNAVAIL` flag. When converting into
operations, `ImageNode` converts alpha socket on finding any socket with
a combined pass without checking the flag.
Since commit rB93e2491ee724 an assertion fails when mapping sockets
twice because now map `add_new` is used.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11566
Adds full frame implementation to Value node operation.
No functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11594
This adds support for importing UV sets which are defined per vertex,
instead of per face corners. Such UV sets can be generated when the
mesh is split according to UV islands, or when there is only one UV
island, in which cases only a single UV value can be stored per
vertex since vertices will never be on a seam.
- Include all objects in pose mode.
- Show the number of objects in pose mode.
- Show the number of objects in edit mode for all types of objects
(not just meshes).
This adds support for importing UV sets which are defined per vertex,
instead of per face corners. Such UV sets can be generated when the
mesh is split according to UV islands, or when there is only one UV
island, in which cases only a single UV value can be stored per
vertex since vertices will never be on a seam.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D11584
Implementation of T86970. This node takes a geometry input with
multiple components and outputs them by component type. Meshes,
Curves, and Point Clouds support combining multiple input instances,
while volumes will only output the first volume component input until
suitable instance realization for multiple volumes is finished.
When direct geometry instancing is implemented it will be possible to
avoid realizing instances in this node.
Differential Revision: https://developer.blender.org/D11577
Creating a new full screen area had it's area initialized as empty,
updating the screen then set the area to a 3D view (as a fallback),
before the actual area type was set.
This made setting the intended space-type run the 3D views exit callback
on a 3D view without a View3D struct allocated, which the exit callback
needed to account for.
Resolve by calling ED_screen_change after the area type has been set.
This patch improves the 3DView statistics overlay to show LOCAL stats
while in local view. This means the stats can vary between 3DViews and
the statusbar when views are in local view, but this gives a much more
accurate count of the objects, and their components, that you are
directly working with rather than just scene values.
Differential Revision: https://developer.blender.org/D8883
Reviewed by Campbell Barton
Versioning code for converting strip offset property doesn't work, when
property was animated and disabled or when crop was used.
When offset property is animated and offset is enabled, animation is
converted to be used with new transform design. When offset is disabled,
animation is left untouched. New transform design doesn't have option
to disable offset, and therefore old unconverted animation is used
instead of converted static value.
Remove animation from propery if it was unused.
Another issue was that both X and Y offset animation was being corrected
by factor caluclated for X channel.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11370
Use lookup string callback function for `sequences_all` RNA property
`rna_SequenceEditor_sequences_all_lookup_string` using a GHash for faster lookups.
When names are changed or strips are added/removed the lookup is tagged invalid.
The next time the lookup is used it will rebuild it.
Reviewed By: sergey, jbakker
Differential Revision: https://developer.blender.org/D11544
Just like the way we often have a choice between an attribute input and
a single float, this adds the ability to choose between attribute and
integer input sockets, useful for D11421.
There is no particular reason these two functions shouldn't be used
outside of the bezier spline implementation since they don't do anything
particularly controversial.
Create maps that specify which batches have vbo or ibo as a reference
and use these maps to discard batches along with buffers.
Differential Revision: https://developer.blender.org/D11588
Adds `source/blender/blendloader/intern/versioning_common.cc` and
`versioning_common.h` for version independent versioning functions.
I only placed `do_versions_add_region_if_not_found()` in there for now.
`blo_do_version_old_trackto_to_constraints()` could also be added, but
that's so old, I prefer keeping that in `versioning_legacy.c`.
Widget drawing code already supported drawing right-aligned, grayed out
shortcut strings. This patch generalizes things a bit so this can also
be used to draw other hints in the same way. There have been a few
instances in the past where this would've been useful, D11046 being the
latest one.
Note that besides some manual regression testing, I didn't check if this
works yet, as there is no code actually using it (other than the
shortcuts). Can be checked as part of further development for D11046.
A possible further improvement would be providing a way to define how
clipping should be done. E.g. sometimes the right-aligned text should be
clipped first (because it's just a hint), in other cases it should be
left untouched (like current code explicitly does it for shortcuts).
Removes the `UI_BUT_HAS_SHORTCUT` flag, which isn't needed anymore.
After looking into task isolation issues with Sergey, we couldn't find the
reason behind the deadlocks that we are getting in T87938 and a Sprite Fright
file involving motion blur renders.
There is no apparent place where we adding or waiting on tasks in a task group
from different isolation regions, which is what is known to cause problems. Yet
it still hangs. Either we do not understand some limitation of TBB isolation,
or there is a bug in TBB, but we could not figure it out.
Instead the idea is to use isolation only where we know we need it: when
holding a mutex lock and then doing some multithreaded operation within that
locked region. Three places where we do this now:
* Generated images
* Cached BVH tree building
* OpenVDB lazy grid loading
Compared to the more automatic approach previously used, there is the downside
that it is easy to miss places where we need isolation. Yet doing it more
automatically is also causing unexpected issue and bugs that we found no
solution for, so this seems better.
Patch implemented by Sergey and me.
Differential Revision: https://developer.blender.org/D11603
When using multiple materials in a single mesh the most time is spend in
counting the offsets of each material for the sorting.
This patch moves the counting of the offsets to render mesh data and
caches it as long as the geometry doesn't change.
This patch doesn't include multithreading of this code.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11612
Clear the runtime data structs instead of individual members,
this simplifies adding new runtime members as there are at least
two places they would need to be cleared.
Resolves error in D8883.
This commit lets the join geometry node transfer dynamic attributes
to the result, the same way that point cloud and mesh attributes are
joined. The implementation is different though, because of an
optimization implemented for curves to avoid copying splines.
The result attribute is added with the highest priority domain (points
over splines), and the highest complexity data type. If one curve had
the attribute on the spline domain but not others, the point domain
values will be used.
Generally this is a bit lower level than I would have liked this code
to be, but should be efficient, and it's really not too complicated.
Differential Revision: https://developer.blender.org/D11491
Instead of building a set and then determining the final domain and
type for every attribute separately in the loop, construct a map with
the necessary data in the first place. This is simpler and should be
slightly more efficient.
Split from D11491
This is an implementation of T88722. It accepts a curve object and
for each spline, reverses the order of the points and all attributes.
This is more of a foundational node to support other nodes in the
future (like curve deform)
Selection takes spline domain attributes to determine which splines
are selected. If no selection is present all splines are reversed.
Differential Revision: https://developer.blender.org/D11538
This node implements the second option of T87429, creating points
along the input splines with the necessary evaluated information
for instancing: `tangent`, `normal`, and `rotation` attributes.
All generic curve point and spline attributes are copied to the
result points as well.
The "Count" and "Length" methods are just like the current options
in the resample node, but the output is points instead of a curve.
The "Evaluated" method uses the points you see on the curve directly,
and therefore should be the fastest.
The rotation data is retrieved from a transform matrix built with the
same method that the curve to mesh node uses. The radius attribute is
divided by 10 so the points don't look absurdly huge in the viewport.
In the future that could be an option.
For the implementation, one thing that could use an improvement
is the amount of temporary allocations while resampling to evaluated
points before the final points. I expect that reusing a buffer for
each thread would give a nice improvement.
Differential Revision: https://developer.blender.org/D11539
This patch allows Windows users to specify that their current blender
installation should be used to create thumbnails and be associated
with ".blend" files. This is done from Preferences / System. The only
way to do this currently is from the command-line and this is sometimes
inconvenient.
Differential Revision: https://developer.blender.org/D10887
Reviewed by Brecht Van Lommel
If the last decoded frame had the same timestamp as the GOP current
packet, then we would skip over this frame when fast forwarding and we
would seek until the end of the file.
This would could only be triggered reliably in single threaded mode.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11601
The warning would appear when using the `ENUM_OPERATORS()` macro inside
of an `extern "C"` block.
Didn't cause a warning in master currently, but in the
`asset-browser-poselib` branch.
After macro expansion, there would be C++ code in code with C linkage
(`extern "C"`). So make sure the expanded C++ code always uses C++
linkage.
The syntax used is totally C++ compliant: the C++ standard requires that
in such nested linkage specifications, the innermost one determines the
linking language (e.g. see
https://timsong-cpp.github.io/cppwp/n4659/dcl.link#4).
On the Windows platform there will be some errors printed to the
console if the user's thumbnail cache folder doesn't already exist.
While creating those folders there is an attempt to do so multiple
times and so we get errors when trying to create when exists. This
is caused by paths that have hard-coded forward slashes, which causes
our path processing routines to not work correctly. This patch defines
those paths using platform-varying separator characters.
Differential Revision: https://developer.blender.org/D11505
Reviewed by Brecht Van Lommel
Support calculating face normals when tessellating. When this is done
before updating vertex normals it gives ~20% performance improvement.
Now vertex normal calculation only needs to perform a single pass on the
mesh vertices when called after tessellation.
Extended versions of normal & looptri update functions have been added:
- BM_mesh_calc_tessellation_ex
- BM_mesh_normals_update_ex
Most callers don't need to be aware of this detail by using:
- BKE_editmesh_looptri_and_normals_calc
- BKE_editmesh_looptri_and_normals_calc_with_partial
- EDBM_update also takes advantage of this,
where calling EDBM_update with calc_looptri & calc_normals
enabled uses the faster normal updating logic.
Bypass stored edge-vectors for ~16% performance gains.
While this increases unit-length edge-vector calculations by around ~4x
the overhead of a parallel loop over all edges makes it worthwhile.
Note that caching edge-vectors per-vertex performs better and may be
worth investigating further, although in my tests this increases code
complexity with barley measurable benefits over not using cache at all.
Details about performance and possible optimizations are noted in
bm_vert_calc_normals_impl.
Rename function EDBM_update_generic to EDBM_update, use a parameters
argument for better readability.
Also add calc_normals argument, which will have benefits when
calculating normals and tessellation together is optimized.
For some custom rendering engines it's advantageous not to write the image files to disk.
An example would be a network rendering engine which does it's own image writing.
This feature is only supported when bl_use_postprocess is also disabled, since render
engines can't influence the saving behavior of the sequencer or compositor.
Differential Revision: https://developer.blender.org/D11512
Better to avoid explicit vectors components direct manipulation when a
generic operation for whole vector exists, if nothing else it avoids
potential mistakes in indices.
Those were caused by various tools used on degenerate geometry, see
T79775.
Note that fixes are as low-level as possible, to ensure they cover as
much as possible of unreported issues too.
We still probably have many more of those hidden in BLI_math though.
This commit does two things:
* Disallows creating more than one link from one socket to a multi socket input.
* Properly count links if there happen to be more than one link between the same sockets.
The new link counting should also be more efficient asymptotically.
Differential Revision: https://developer.blender.org/D11570
- The argument with named with an `r_` prefix when it was in fact
also read from.
- The argument passed in had to be 'psys->clmd->hairdata',
if it was not - the function would not worked.
When moving a linked collection, we seem to only receive a depsgraph update
for an empty object so the Blender synchronization cannot discriminate it
and tag the object(s) (light or geometry) for an update through
id_map.set_recalc.
This missing transform update only affects lights since we do not check
manually if the transformations were modified like we do for objects.
To fix this, add a check to see if the transformation is different provided
that a light was already created.
Reviewed By: brecht
Maniphest Tasks: T88515
Differential Revision: https://developer.blender.org/D11574
This patch improves the positioning of child windows when on monitors
that are arranged vertically (any above any other). When calculating a
window position in Ghost coordinates from GL coordinates we were using
monitor height, which can give incorrect values when desktop is taller
than any single monitor. So use desktop height instead.
See D10637 for more details and examples.
Differential Revision: https://developer.blender.org/D10637
Reviewed by Brecht Van Lommel
This patch makes the "Render" window a top-level window, not a child of
the main window, which was the case in blender versions prior to 2.93.
This means it is no longer "on top", nor is the icon grouped on the
taskbar in the same way, but you can Alt-Tab between it and the main
window. This change only affects the Windows platform as the other
platforms behave this way.
See D11576 for links to negative feedback that prompts this change.
Differential Revision: https://developer.blender.org/D11576
Reviewed by Brecht Van Lommel
This moves the flash on mode transfer effect option from the overlays to
an operator property of the mode transfer operator.
- This effect is intended to show the target object when no overlays or
a minimal set of overlays is enabled. Making it part of the whole set of
overlays invalidates this use case.
- The effect is not intended to be configurable per viewport, it should
be a global option.
The effect is still implemented using the overlay engine (instead of a
draw modal callback) due to performance and drawing artifacts. Having it
implemented as an overlay with runtime timer data in the objects makes
also possible to run multiple animations at the same time without any
visual glitches.
Reviewed By: campbellbarton, JulienKaspar
Differential Revision: https://developer.blender.org/D11519
Note: Linking in this case as in link vs. append. Easily confused with linking
a data-block to multiple usages (e.g. single material used by multiple
objects).
Adds a drop-down to the Asset Browser header to choose between Link and Append.
This is probably gonna be a temporary place, T54642 shows where this could be
placed eventually.
Linking support is crucial for usage of the asset browser in production
environments. It just wasn't enabled yet because a) the asset project currently
focuses on single user, not production assets, and b) because there were many
unkowns still for the workflow that have big impact on production use as well.
With the recently held asset workshop I'm more confident with enabling linking,
as design ideas relevant to production use were confirmed.
Differential Revision: https://developer.blender.org/D11536
Reviewed by: Bastien Montagne
The operator run when dropping objects would duplicate the dropped object and
place that in the scene, even though that was just appended. Addressed by
making the duplication optional for the operator. If the duplication is not
requested, the object is just added to the scene (if needed), repositioned
based on the drop location and selected (deselecting other objects).
This makes the operator work as expected when using it to drop assets.
Reviewed as part of https://developer.blender.org/D11536.
Reviewed by: Bastien Montagne
Fix segmentation fault that can occur when reordering animation
channels.
Under some specific conditions, the list "act->curves" is empty in the
"join_groups_action_temp" function. In particular, this happens when a
scene contains an action that has not been pushed down, and with no
keyframe in it.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D11569
While this preprocessing does take some time upfront,
it avoids longer lookup later on, especially as nodes get
more sockets.
It's probably possible to make this more efficient in some cases
but this is good enough for now.
Scanline processor did its own heurestic what didn't scale well when
having a multiple cores. In stead of using our own code this patch will
leave it to TBB to determine how to split the scanlines over the
available threads.
Performance of the IMB_transform before this change was 0.002123s, with
this change 0.001601s. This change increases performance in other areas
as well including color management conversions.
Reviewed By: zeddb
Differential Revision: https://developer.blender.org/D11578
When using large sequences including audio the drawing of the audio on
top of the strip takes a lot of time. This effects the playback
performance heavily.
During the animation playback performance there was a solution for this
by only drawing the playhead overlay. This was reverted for the sequence
editor as it didn't update the color strips when they were animated.
This patch checks if there are animated color strips if so the full
screen is redrawn, otherwise only the playhead is redrawn.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D11580
One drawback to trying to predict the number of threads that will be
used in the `task_graph` is that we are only sure of the number when the
threads are running.
Using `BLI_task_parallel_range` allows the driver to
choose the best thread distribution through `parallel_reduce`.
The benefit is most evident on hardware with fewer cores.
This is the result on an 4-core laptop:
||before:|after:
|---|---|---|
|large_mesh_editing:|Average: 5.203638 FPS|Average: 5.398925 FPS
||rdata 15ms iter 43ms (frame 193ms)|rdata 14ms iter 36ms (frame 187ms)
Differential Revision: https://developer.blender.org/D11558
This is an adaptation of {D11488}.
A disadvantage of manually setting the iter ranges per thread is that
we don't know how many threads are running in the background and so we
don't know how to best distribute the ranges.
To solve this limitation we can use `parallel_reduce` and thus let the
driver choose the best distribution of ranges among the threads.
This proved to be especially beneficial for computers with few cores.
**Benchmarking:**
Here's the result on an 4-core laptop:
||master:|PATCH:
|---|---|---|
|large_mesh_editing:|Average: 5.203638 FPS|Average: 5.398925 FPS
||rdata 15ms iter 43ms (frame 193ms)|rdata 14ms iter 36ms (frame 187ms)
Here's the result on an 8-core PC:
||master:|PATCH:
|---|---|---|
|large_mesh_editing:|Average: 15.267482 FPS|Average: 15.906881 FPS
||rdata 9ms iter 28ms (frame 65ms)|rdata 9ms iter 25ms (frame 63ms)
|large_mesh_editing_ledge: |Average: 15.145966 FPS|Average: 15.520474 FPS
||rdata 9ms iter 29ms (frame 65ms)|rdata 9ms iter 25ms (frame 64ms)
|looptris_test:|Average: 4.001917 FPS|Average: 4.061105 FPS
||rdata 12ms iter 90ms (frame 236ms)|rdata 12ms iter 87ms (frame 230ms)
|subdiv_mesh_cage_and_final:|Average: 1.917769 FPS|Average: 1.971790 FPS
||rdata 7ms iter 37ms (frame 261ms)|rdata 7ms iter 31ms (frame 258ms)
||rdata 7ms iter 38ms (frame 252ms)|rdata 7ms iter 33ms (frame 249ms)
|subdiv_mesh_final_only:|Average: 6.387240 FPS|Average: 6.591251 FPS
||rdata 3ms iter 25ms (frame 151ms)|rdata 3ms iter 16ms (frame 145ms)
|subdiv_mesh_final_only_ledge:|Average: 6.247393 FPS|Average: 6.596024 FPS
||rdata 3ms iter 26ms (frame 158ms)|rdata 3ms iter 16ms (frame 148ms)
**Notes:**
- The improvement can only be noticed if all extracts are multithreaded.
- This patch touches different areas of the code, so it can be split into another patch if the idea is accepted.
These screenshots show how threads behave in a quadcore:
Master:
{F10164664}
Patch:
{F10164666}
Differential Revision: https://developer.blender.org/D11558
ffmpeg_generic_seek_workaround did work properly and our start pts
calculation was wrong.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11562
Because of the added sanity checks in rB14508ef100c9 (D11492), seeking
in proxies would not work correctly any more. This is because it wasn't
working as intended before, but in most cases this wouldn't be
noticeable. However now when the sanity checks are tripped it is very
noticeable that something is wrong
The indexer tried to use dts values for time stamps when we used pts in
our decode functions to get the time positions. This would make it
start in the wrong GOP frames when searching. Now that we enforce no
crossing of GOP frames when decoding after seek, this would lead to
issues.
Now we correctly use pts (or dts if pts is not available) and thus we
don't have any seeking issues because of time stamp format missmatch.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11561
When sampling ImBuf can be a char or a float buffer. Current sampling
functions added overhead by checking which kind of buffer was passed
every pixel that was sampled. When performing image processing this
check can be removed outside the inner loop adding 5% of performance
increase in the `IMB_transform` operator.
Remap {key Alt I} from `anim.delete_key_v3d` to `anim.delete_key`. This
makes it keyframe removal symmetrical with keyframe insertion ({key I}).
Both the default keymap {key Alt I} and the Industry Compatible keymap
{key Alt S} have been updated.
Reviewed By: sybren, #animation_rigging
Maniphest Tasks: T88068
Differential Revision: https://developer.blender.org/D11528
Inside the sequencer the cropping and transform of images/buffers were
implemented locally. This reduced the optimizations that a compiler
could do and added confusing code styles. This patch adds
`IMB_transform` to reduce the confusion and increases compiler
optimizations as more code can be inlined and we can keep track of
indices inside the inner loop.
This increases end-user performance by 30% when playing back aa video
in VSE.
Reviewed By: ISS, zeddb
Differential Revision: https://developer.blender.org/D11549
This patch changes occurrences of percentage to factor.
There are some usages of percentage left in there on purpose.
They are distinguished as follows:
- factor is 0-1 float
- percentage is 0-100 int
Ref D11361
Reviewed by: sybren, campbellbarton
Prepare node for conversion to Geometry Nodes.
There should be no functional changes.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D11506
When using non-default system separator in filename path, code would end up
with an absolute path mixing regular and alternative separator,
confusing the rest of the path manipulations later on.
So this commit add proper replacements of alternative separators, and
path normalization.
Splitting out thread safe iteration logic means regular iteration
isn't checking for the thread-safe pointer each step.
This gives a small but measurable overall performance gain of 2-3%
when redrawing a high-poly mesh.
Ref D11564
Reviewed By: mont29
This change was prompted by D6408 which moves thumbnail extraction into
a shared function that happens use these endian defines but only links
blenlib.
There is no need for these defines to be associated with globals
so move into their own header.
Allows to define properties which will have proper units displayed
in the interface. The internal storage is expected to be seconds
(which matches how other times are stored in Blender).
Is not immediately used in Blender, but is required for the upcoming
feature in Cycles X (D11526)
The naming does not sound very exciting, but can't think of anything
better either.
For test it probably easiest to define FloatProperty with subdtype
of TIME_ABSOLUTE.
Differential Revision: https://developer.blender.org/D11532
Previously, a vertex from destination mesh would always be added to all
transferred vgroup (with a 0.0 weight), even if none of its matching
sources in source mesh belonged to the matching source vgroups.
Now a destination vertex is only added to a given destination vgroup if
at least one of its source vertices belong to the matching source
vgroup.
Issue found and initial investigation by @pls in D11524, thanks!
Doxygen by default leaves out any functions inside
#ifdef blocks that it thinks are disabled.
This change adds a DOXYGEN symbol, so you can
still get the functions included in the
documentation even if the #ifdef would
have normally excluded them.
before
#if defined(_WIN32)
after
#if defined(_WIN32) || defined(DOXYGEN)
Patch provided by Campbell Barton on chat.
TBBmalloc_proxy already takes care of any allocations
being done from MSVC compiled code, some of the dependencies
like GMP cannot be build with MSVC and we have to use
mingw to build them. mingw however links against the older
msvcrt.dll for its allocation needs, which TBBMallocProxy
does not hook.
GMP has an option to supply your own allocation functions
so we can still manually redirect them to TBBMalloc.
In a test-file with a boolean geometry node, this patch
uses 32s effective CPU time compared to 52s before.
Differential Revision: https://developer.blender.org/D11435
Reviewed by Campbell Barton, Ray Molenkamp
Remove an unnecessary call to pose_slide_mouse_update_percentage
That call was overriding the typed value
Reviewed By: #animation_rigging, Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D11395
Ref D11395
To draw the overlay stats in columns the strings must be measured to
find the longest one. In some circumstances this measurement can be
incorrect. We draw the text with a specific size yet do not explicitly
set the size before calling BLF_size. This patch properly sets the size
so that the measurement will match what will be used for output.
See T88799 for examples of measurement failure.
Differential Revision: https://developer.blender.org/D11504
Reviewed by Hans Goudey
First, expand on the interpolation to evaluated points with a templated
helper function, and a function that takes a GSPan. Next, add a set of
functions to `Spline` for interpolating at arbitrary intervals between
the evaluated points. The code for doing that isn't that complicated
anyway, but it's nice to avoid repeating, and it might make it easier
to unroll the special cases for the first and last points if we require
the index factors to be sorted.
This commit adds a node to output the convex hull of any input geometry
as a mesh, which is an enclosing geometry around a set of points.
All geometry types are supported, besides volumes.
The code supports operating on instances to avoid copying all input
geometry before the operation. The implementation uses the same backend
as the operation in edit mode, but uses Mesh directly instead of BMesh.
Attribute transfer is not supported currently, but would be a point of
improvement for the future if it can work in a predictable way on
different geometry input types.
Differential Revision: https://developer.blender.org/D10925
Note that these changes are limited simple cases as these kinds of
changes could allow for errors when refactoring code when the known
state is not so obvious.
Use BM_iter_parallel for face tessellation, this gives around
6.5x speedup for BM_mesh_calc_tessellation on high poly meshes in my
tests, although exact speedup depends on available cores.
Support thread local storage for BLI_task_parallel_mempool,
as well as support for the reduce and free callbacks.
mempool_iter_threadsafe_* functions have been moved into a private
header thats only shared between task_iterator.c and BLI_mempool.c
so the TLS can be made part of the iterator array without having to
rely on passing in struct offsets.
Add test task.MempoolIterTLS that ensures reduce and free
are working as expected.
Reviewed By: mont29
Ref D11548
Also modified existing utility functions to take
care of the new surface normal interpolation and so on.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D11543
While this should not be allowed in general, there are some cases
(library overrides at least) where supporting this is mandatory.
Further more, comment stating that this could crash is from 2011, could
not reproduce any issue with current code. Commit comment was referring
to undo/redo, but in use cases here those should not affect things.
Note that in general, such relatively high-level checks should be
handled by high-level, close to user code (like in ED area e.g.), not in
low-level BKE code anyway.
This patch adds a specific extraction method when the mesh has only
one material. This method is multi-threaded.
There is a trade-off in this patch as the ibo isn't compressed (it adds
restart indexes for hidden faces). So it depends if threading is faster
than the additional GPU buffer upload.
# Subdivided cube
I used a cube subdivided 7 times, modifiers applied. that gives around 400000 faces.
The test is selecting some vertices and move them. During this test the next buffers are updated on each frame:
* vbo.pos_nor
* vbo.lnor
* vbo.edit_data
* ibo.tris
* ibo.points
System info:
|platform| Linux-5.11.0-7614-generic-x86_64-with-glibc2.33|
| renderer| AMD SIENNA_CICHLID (DRM 3.40.0, 5.11.0-7614-generic, LLVM 11.0.1)|
|vendor| AMD|
|version| 4.6 (Core Profile) Mesa 21.0.1|
|cpu| Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz|
|compiler| gcc version 10.3.0|
Timing have been measured using DEBUG_TIME in `draw_cache_extract_mesh`.
master: `rdata 8ms iter 45ms (frame 153ms)`
this patch `rdata 6ms iter 36ms (frame 132ms)`
Reviewed By: mano-wii
Maniphest Tasks: T88352
Differential Revision: https://developer.blender.org/D11290
This commit adds a flag to disable displaying some socket labels which
just redundant eye sores. We still want to have a label, because that
information can potentially be accessed elsewhere in the UI.
The flag is used in a few geometry nodes.
Differential Revision: https://developer.blender.org/D11540
This is an optimization, but the difference is still not that
significant as some extractions are still done in single thread.
**Benchmarking**
||before:|after:
|---|---|---|
|large_mesh_editing:|Average: 14.246502 FPS|Average: 15.438118 FPS
||rdata 9ms iter 31ms (frame 69ms)|rdata 9ms iter 27ms (frame 65ms)
|large_mesh_editing_ledge: |Average: 14.913622 FPS|Average: 15.856538 FPS
||rdata 9ms iter 30ms (frame 67ms)|rdata 9ms iter 26ms (frame 63ms)
|looptris_test:|Average: 3.970774 FPS|Average: 4.095200 FPS
||rdata 11ms iter 90ms (frame 235ms)|rdata 12ms iter 87ms (frame 229ms)
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11467
A single threaded task with thread data over 8192 bytes would leak.
While this didn't happen in practice, it could cause issues in the
future.
The free call for `task_parallel_iterator_do` wasn't running
if callbacks weren't set, also not an issue in practice but avoids
potential problems in the future too.
Changes introduced in commit rBe9f2f17e8518
can create different render results when there is
a Math or Mix operation after TextureOperation
on tiled execution model.
This is due to WriteBufferOperation forcing a single pixel
resolution when these operations use a preferred
resolution of 0 to check if their inputs have resolution.
Fixing this behaviour creates different renders too.
This patch keeps previous tiled implementation and
adds the new implementation only for full frame execution.
Reviewed By: Jeroen Bakker (jbakker)
Differential Revision: https://developer.blender.org/D11546
In order to reduce stack size this patch converts full frame
recursive methods into iterative.
- No functional changes.
- No performance changes.
- Memory peak may slightly vary depending on the tree because
now breadth-first traversal is used instead of depth-first.
Tests in D11113 have same results except for test1 memory peak:
360MBs instead of 329.50MBs.
Reviewed By: Jeroen Bakker (jbakker)
Differential Revision: https://developer.blender.org/D11515
CMake builder and install deps changes, precompiled libraries are still to be
committed.
Ref T88438, T88434
Differential Revision: https://developer.blender.org/D11486
During transforming an image, a matrix multiplication per pixel was done.
The matrix in itself is always linear so it could be replaced by two additions.
During testing in debug builds playing back a movie went from 20fps to
300 fps.
Reviewed By: zeddb
Differential Revision: https://developer.blender.org/D11533
Talked with Bastien and we ended up looking into this. Issue is that the
dupliation through drag & drop should also be considered a
"sub-process", like Shift+D duplicating does. Added a comment explaining
why this is needed.
Current index builder is designed to be used in a single thread.
This makes all index buffer extractions single threaded.
This patch adds a thread safe solution enabling multithreaded
building of index buffers.
To reduce locking the solution would provide a task/thread local
index buffer builder (called sub builder).
When a thread is finished this thread local index buffer builder
can be joined with the initial index buffer builder.
`GPU_indexbuf_subbuilder_init`: Initialized a sub builder. The
index list is shared between the parent and sub buffer, but the
counters are localized. Ensuring that updating counters would
not need any locking.
`GPU_indexbuf_subbuilder_finish`: merge the information of the
sub builder back to the parent builder. Needs to be invoked outside
the worker thread, or when sure that all worker threads have been
finished. Internal the function is not thread safe.
For testing purposes the extract_points extractor has been migrated to
the new API. Herefore changes to the mesh extractor were needed.
* When creating tasks, the task number of current task is stored in
ExtractTaskData including the total number of tasks.
* Adding two functions in `MeshExtract`.
** `task_init` will initialize the task specific userdata.
** `task_finish` should merge back the task specific userdata back.
* adding task_id parameter to the iteration functions so they can
access the correct task data without any need for locking.
There is no noticeable change in end user performance.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11499
This node creates a boolean face attribute that is "true" for
every face that has the given material.
Differential Revision: https://developer.blender.org/D11324
Selection of an FCurve with box/circle select now selects the entire
curve and all its keys:
- Box selecting a curve selects all the keyframes of the curve.
- Ctrl + box selecting of the curve deselects all the keyframes of the
curve.
- Shift + box selecting of the curve extends the keyframe selection,
adding all the keyframes of the curves that were just selected to the
selection.
- In all cases, if the selection area contains a key, nothing is
performed on the curves themselves (the action only impacts the
selected keys).
Reviewed By: sybren, #animation_rigging
Differential Revision: https://developer.blender.org/D11181
Some of the primitive nodes can return null in an error condition.
This is confusing mixed with adding a maderial slot in calling
functions. This is the second crash caused by that confusion. It's
simpler to add the slot right when allocating the mesh, and it will
lend itself better to copy & paste coding in the future.
Differential Revision: https://developer.blender.org/D11530
Under some circumstances using task isolation can cause deadlocks.
Previously, our task pool implementation would run all tasks in an
isolated region. Now using task isolation is optional and can be
turned on/off for individual task pools.
Task pools that spawn new tasks recursively should never enable
task isolation. There is a new check that finds these cases at runtime.
Right now this check is disabled, so that this commit is a pure refactor.
It will be enabled in an upcoming commit.
This fixes T88598.
Differential Revision: https://developer.blender.org/D11415
Simplify vertex normal calculation by moving the main normal
accumulation function to operate on vertices instead of faces.
Using faces had the down side that it needed to zero, accumulate and
normalize the vertex normals in 3 separate passes, accumulating also
needed a spin-lock for thread since the face would write it's normal
to all of it's vertices which could be shared with other faces.
Now a single loop over vertices is performed without locking.
This gives 5-6% speedup calculating all normals.
This also simplifies partial updates, fixing a problem where
all connected faces were being read from when calculating normals.
While this could have been resolved separately,
it's simpler to operate on vertices directly.
Move BMesh conversion and all loading code into worker.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D11288
ChildWindowFromPoint retrieves the child of the provided window at a
point. In this case it always returns 0 because HWND_DESKTOP is flag
defined as 0, which is never a valid window handle and is not intended
for use in place of a window handle.
Forwarding of mousewheel events was added in adb08def61, and later
modified to the current unworking state in e9645806f5. Sending mouse
wheel events to the window under the cursor is a system preference and
therefore should not be overridden by Blender, therefore the noop code
has been removed.
Added a new api function to stich multires grids
on specific faces in a mesh,
subdiv_ccg_average_faces_boundaries_and_corners,
and changed multires normal calc to use it.
VTune profiling showed that this was a major
performance hit once you get above 10,000 or so
base mesh faces and/or have a high number of
subdivision levels.
Here's a video comparing the difference. Note the
bpy.app_debug switch is not in the final commit.
{F10145323}
And the .blend file:
{F10145346}
Reviewed By: Sergey Sharybin (sergey)
Differential Revision:
https://developer.blender.org/D11334
Added a new api function to stich multires grids
on specific faces in a mesh,
subdiv_ccg_average_faces_boundaries_and_corners,
and changed multires normal calc to use it.
VTune profiling showed that this was a major
performance hit once you get above 10,000 or so
base mesh faces and/or have a high number of
subdivision levels.
Here's a video comparing the difference. Note the
bpy.app_debug switch is not in the final commit.
{F10145323}
And the .blend file:
{F10145346}
Reviewed By: Sergey Sharybin (sergey)
Differential Revision:
https://developer.blender.org/D11334
Also use Curve as an argument instead of Object, since the object was
only used to retrieve the curve, and the calling code is already working
with curve data.
Some of the comments referenced code that was no longer there, or even
defines that were removed. Other comments were more confusing and
vague than helpful. Also adjust formatting in a few cases.
This patch improves the positioning of the little mnemonic underlines
shown under some hotkey letters in menus, especially when using custom
fonts.
see D11521 for details and examples.
Differential Revision: https://developer.blender.org/D11521
Reviewed by Campbell Barton
This revert went too far, only one line (the minimal version of FFMPEG
for `install_deps.sh` script`) actually needed to be reverted...
Sorry for the noise.
No functional changes as logic elsewhere already ensured this.
This just makes it obvious to anyone reading over the code that
these arguments are keyword only.
FOV was expanded to cover the shifting range,
rather than to precisely cut at the image border. Now fixed.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D11523
Moving the bounds code to the builder can be useful
for future optimizations like building multithreaded.
Reviewed By: fclem, jbakker
Differential Revision: https://developer.blender.org/D11455
Small bug that's causing edge count to be incorrect in
final culled list, just being offset exactly 1 entry.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D11513
This field was used for extend feature to get handle position of
metastrip children. Since D9972 extend feature works only on meta
strip itself, not it's children.
So `SEQ_transform_get_left_handle_frame()` second argument is always
false and can be removed.
Another instance of `seq->tmp usage` is hack to distinguish strips to be
shuffled, which is not covered by this patch.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D10321
Use bounding box tests quickly tell that two components cannot
have a containment relation between each other. This change
cut about 0.6s off a test with 25 big icospheres.
Add a call to orthogonalize the matrix before processing for the
same reasons as D8915, and an early exit in case no limits are
enabled for a bit of extra efficiency.
Since the constraint goes through Euler decomposition, it would
in fact remove shear even before this change, but the resulting
rotation won't make much sense.
This change allows using the constraint without any enabled limits
purely for the purpose of efficiently removing shear.
Differential Revision: https://developer.blender.org/D9626
Since Limit Rotation is based on Euler decomposition, it should allow
specifying the order to use for the same reasons as Copy Rotation does,
namely, if the bone uses Quaternion rotation for its animation channels,
there is no way to choose the order for the constraint.
Ref D9626
Fixed the logic for seeking in ffmpeg video files.
The main fix is that we now apply a small offset in ffmpeg_get_seek_pos
to make sure we don't get the frame in front of the seek position when
seeking backward.
The rest of the changes is general cleanup and untangling code.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11492
Due to the way we ship the CRT on windows TBB's
malloc proxy was unable to attach it self to
the memory management functions on windows 10.
This change moves ucrtbase.dll out of the blender.crt
folder and back into the main blender folder to side
step some undesirable behaviour on win10 making TBB
once more able to attach it self.
Having this work again, should give a speed
boost in memory allocation heavy workloads
such as mantaflow.
For details on how this only failed on Win10
see T88813
This patch exposes functionality for performing partial mesh updates
for normal calculation and face tessellation while transforming a mesh.
The partial update data only needs to be generated once,
afterwards the cached connectivity information can be reused
(with the exception of changing proportional editing radius).
Currently this is only used for transform, in the future it could be
used for other operators as well as the transform panel.
The best-case overall speedup while transforming geometry is about
1.45x since the time to update a small number of normals and faces is
negligible.
For an additional speedup partial face tessellation is multi-threaded,
this gives ~15x speedup on my system (timing tessellation alone).
Exact results depend on the number of CPU cores available.
Ref D11494
Reviewed By: mano-wii
Cycles, Eevee, OSL, Geo, Attribute
This operator provides consistency with the standard math node. Allows users to use a single node instead of two nodes for this common operation.
Reviewed By: HooglyBoogly, brecht
Differential Revision: https://developer.blender.org/D10808
rB847579b42250 updated the TBB build script
which had some unintended consequences for
windows as the directory layout slightly
changed.
This change adjusts the builder to the new
structure, there are no version/functional
changes.
When changing to another texture paint slot, the texture displayed in
the viewport should change accordingly (as well as the image displayed
in the Image Editor).
The procedure to find the texture to display in the viewport
(BKE_texpaint_slot_material_find_node) could fail
though because it assumed iterating nodes would always happen in the
same order (it was index based). This is not the case though, nodes can
get sorted differently based on selection (see ED_node_sort).
Now check the actual image being referenced in the paint slot for
comparison.
ref T88788 (probably enough to call this a fix, the other issue(s)
mentioned in the report are more likely a feature request)
Reviewed By: mano-wii
Maniphest Tasks: T88788
Differential Revision: https://developer.blender.org/D11496
The (tracking) camera presets have not been updated in the last 7 or
more years, so they are very outdated. I found it pointless to have a
few specific camera models in the list and instead add the most commonly
used sensor sizes/film sizes. This way the list is shorter, easier to
maintain/becomes later outdated, and is more user friendly for most people
who don't own any of the specific cameras. I added the Crop Factor to the
Beginning of the name, so it gets sortet in the correct order and presets
are easier to find based on the size.
Reviewed By: #render_cycles, #motion_tracking, brecht, sergey
Differential Revision: https://developer.blender.org/D10739
These were only showing in the Properties Editor, but there is no reason
to have the panels be different in the sidebar (they should not show in
the top bar though).
agreed upon by both @anoniov and @mendio
ref T88787
So far, linked IDs were not properly sorted at all, only the ones
explicitely linked from WM code would be, but any indirectly linked
data-blocks would end up in some random order in their lists.
While not ideal, this is not a huge issue in itself, but it had bad
side-effects, e.g. causing (recursive) resync of overrides to happen in
random order, leading to mismatches between name indices of newly-generated
override IDs and the one existings e.g.
And in general, it is much better to be consistent here.
Note that the file sub-version is bumped for this commit, since some
sorting (the directly linked IDs which we keep a reference to) should
never need to be re-done after relevant doversion process.
This commit adds a node that outputs the total length of all
evalauted curve splines in a geometry set as a float value.
Differential Revision: https://developer.blender.org/D11459
This commit implements support for deleting curve data in the geometry
delete node. Spline domain and point domain attributes are supported.
Differential Revision: https://developer.blender.org/D11464
This implements T87633
This overlay renders a flash animation on the target object when
transfering the mode to it using the mode transfer operator.
This provides visual feedback when switching between objects without
extra overlays that affect the general color and lighting in the scene.
Differences with the design task:
- This uses just a fade out animation instead of a fade in/out animation.
The code is ready for fade in/out, but as the rest of the overlays
(face sets, masks...) change instantly without animation, having a fade
in/out effect gives the impression that the object flashes twice (once
for the face sets, twice for the peak alpha of the flash animation).
- The rendering uses a flat color without fresnel for now, but this can
be improved in the future to make it look more like the shader in the
prototype.
- Not enabled by default (can be enabled in the overlays panel), maybe
the defaults can change for 3.0 to disable fade inactive and enable this
instead.
Reviewed By: jbakker, JulienKaspar
Differential Revision: https://developer.blender.org/D11055
This operator is needed in some cases to update image preview.
In workspaces with smaller timelines this is limiting, because users
need to first check that mouse cursor is in correct place, then press
CTRL+R shortcut.
The Wayland server will not update hidden surfaces. This will block the
main event loop and thus also block updates to visible windows in a multi-
window setup.
Keyboard click-drag events now use the "Drag Threshold".
This resolves a problem where keyboard click drag events
used a much smaller threshold when using a tablet.
In some cases e.g. only objects would actually need resync, so
collections on the override character would not be resynced, and if some
objects were sharing relationships with others those could be
lost/destroyed.
max unneccessarily
Since rB298d5eb66916 [which was needed to update buttons with custom
property range functions correctly], using tab would always clamp
(hardmin/hardmax) properties which were using FLT_MAX / INT_MAX as range
in their property definitions.
The clamping of rB298d5eb66916 was copied over from rB9b7f44ceb56c
[where it was used for the softmin/softmax], and while the re-evaluation
of hardmin/hardmax is needed for custom property range functions, the
clamping should actually not take place.
There are many properties using FLT_MAX / INT_MAX etc. and while it
probably would be good to update these with ranges that make more sense
-- not using FLT_MAX / INT_MAX would not have done the clamping here --
there should not be an arbitrary limit to these and they should stay as
they are.
Maniphest Tasks: T88762
Differential Revision: https://developer.blender.org/D11473
Ensure 'virtual' linked override IDs generated by the recursive resync
process are tagged as indirectly linked data.
This is needed to avoid the 'missing data' messages on those virtual
data-blocks after saving and reloading.
`BKE_main_collections_parent_relations_rebuild`,
`BKE_collection_parent_relations_rebuild` anf their internal
dependencies had two issues fixed by this commit:
* Main one was that a same collection could be processed several times,
sometimes even in an infinite loop (in some rare corner cases), by
`collection_parents_rebuild_recursive`.
* More exotic, code here would not ensure that the collections it was
processing were actually in Main (or a master one from a scene in
Main), which became an issue with some advanced ID management
processes involving partially out-of-main remapping, like liboverride
resync.
Use SEQ_time_strip_intersects_frame function to test if strip intersects with frame.
Note: There are cases where this function should not be used. For example splitting
strips require at least 1 frame "inside" strip. Another example is drawing, where
playhead technically doesn't intersect strip, but it is rendered, because current
frame has "duration" or "thickness" of 1 frame.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11320
Remove unused flag `SEQ_DUPE_ANIM` and code used by this flag.
Remove flag `SEQ_DUPE_CONTEXT` and refactor code, to split operator
logic from duplication code.
Reduce indentation level in for loop.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11318
Images with 4:2:2 and 4:4:4 chroma subsampling were blurred when
`SWS_FAST_BILINEAR` interpolation is set for `anim->img_convert_ctx`.
Use `SWS_BILINEAR` interpolation for all movies, as performance is
not impacted by this change.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11457
Changes in rBce649c73446e, affected established proxy codec preset.
Presets were not working and all presets were similar to `veryfast`.
Tunes are now working too, so `fastdecode` tune can be used. I have
measured little improvement, but I tested this only on 2 machines and
I have been informed that `fastdecode` tune does influence decoding
performance for some users.
Change preset from `slow` to `veryfast` and add tune `fastdecode`
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11454
While encoder parameters for lossless encoding are set correctly,
output is not lossless due to pixel format being set to
`AV_PIX_FMT_YUV420P` which is inherently lossy due to chroma subsampling.
This was reported in T61569 and was merged to T57397, but there were
2 bugs - one for encoding and one for decoding.
Set pixel format to `AV_PIX_FMT_YUV444P` when rendering lossless H264
files. This format isn't available in `codec->pix_fmts[0]` and it looks,
that it has to be hard-coded.
Reviewed By: sergey
Differential Revision: D11458
This patch is from erik85, who says:
This patch makes populate_plane inside polymesh_from_trimesh_with_dissolve run in parallel.
On a test file with a boolean between two subdivided cubes (~6 million verts) this gives a 10% speed increase (49.5s to 45s) on my 6 core CPU.
Also there is an optimization of other_tri_if_manifold to skip the contains-call and get the pointer directly.
This reduces CPU time for find_patches from 5s to 2.2s on the same test file.
When there are many components (separate pieces of connected mesh),
a part of the algorithm to determine component containment was slow.
Using a float version of finding the nearest point on a triangle
as a prefilter sped this up enormously. A case of 25 icospheres
subdivided twice goes 11 seconds faster on my Macbook pro with this
change.
This just moves a couple of files in `space_node` to C++ and fixes
related errors.
The goal is to be able to use C++ data structures to simplify the code.
Differential Revision: https://developer.blender.org/D11451
The mesh to curve node generated an empty curve because no edges were
selected. This commit changes that node to not add a curve in that case.
This also changes the curve to mesh node to not add a material when
no mesh was created. Even though we don't expect null curves or meshes
in this case, the change is harmless.
EEVEE uses hashing to sync aov names and types with the gpu.
For the type a hashed value was overridden making `decalA`
and `decalB` choose the same hash. This patches fixes this
by removing the most significant bit.
EEVEE uses hashing to sync aov names and types with the gpu. For the type a hashed value was overridden making `decalA` and `decalB` choose the same hash. This patches fixes this by removing the most significant bit.
Sometimes is required to reset the thickness or the opacity of the strokes. Actually this was done using a modifier, but this operators solves this.
Reviewed By: mendio, filedescriptor
Maniphest Tasks: T87427
Differential Revision: https://developer.blender.org/D11453
Often you need to copy a spline to do an operation, but don't want
to manually copy over all of the settings. I've already forgotten to
do it once anyway. These functions copy a spline's "settings" into a
new spline, but not the data. I tried to avoid duplicating any copying
so this is easier to extend in the future.
Differential Revision: https://developer.blender.org/D11463
This is due to cam->obmat precision issue,
where it affects view vector precision.
Reviewed by Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D11461
Often it would be beneficial to avoid the virtual array implementation
in `geometry_component_curve.cc` that flattens an attribute for every
spline and instead read an attribute separately for every input spline.
This commit implements functions to do that.
The downside is some code duplication-- we now have two places handling
this conversion. However, we can head in this general direction for the
attribute API anyway and support accessing attributes in smaller
contiguous chunks where necessary.
No functional changes in this commit.
Differential Revision: https://developer.blender.org/D11456
Use the D-key to access the view menu instead of the Tilda key,
which isn't accessible on some international layouts.
To resolve the conflicts the following changes have been made.
- `D` (motion) opens the view menu.
- `D` (mouse-button) uses grease-pencil (as it does currently).
- `Tilda` is used to for "Object Mode Transfer" instead of the View menu.
See T88092 for details.
Reviewed By: Severin
Ref D11189
Add a doc-string explaining the purpose of each call back and
how they should be used.
Also add a currently unused callback 'POST_FAIL' that is to be used in
cases the action fails - giving script authors, a guarantee that a
call to `pre` will always have a matching `post/post_fail` call.
- D11422: adds a callback that can use 'post_fail'.
- T88696: proposed these conventions.
This node is similar to the mask modifier, but it deletes the elements
of the geometry corresponding to the selection, which is retrieved as
a boolean attribute. The node currently supports both mesh and point
cloud data. For meshes, which elements are deleted depends on the
domain of the input selection attribute, just like how behavior depends
on the selection mode in mesh edit mode.
In the future this node will support curve data, and ideally volume
data in some way.
Differential Revision: https://developer.blender.org/D10748
Metadata panel was visible in each category. In other editors, this
panel is usually placed in category with other source media properties.
In sequencer, metadata is transfered over while compositing and relation
to particular strip is lost, therefore separate category for metadata
seems to be best option. Since Metadata panel is alone in this category,
it will be open by default.
This commit skips the eager recalculation of mesh normals in the
transform node. Often another deformation or topology-altering
operation will happen after the transform node, which means the
recalculation was redundant anyway.
In one of my test cases this made the node more than 14x faster.
Though depending on the situation the cost of updating the normals
may just be shifted elsewhere.
This was reported for the special case of mapping with "Strand /
Particle" coords, but was not working with other coordinates either.
Dont see a reason for not supporting Size influence textures for these
kinds of particles (and since these types of particles have an "age"
like all others as well, even the "Strand / Particle" coords are
supported here as well)
Maniphest Tasks: T88715
Differential Revision: https://developer.blender.org/D11449
This fixes T88455 by adding an empty material slot to newly
generated meshes. This allows the object to overwrite the
"default" material without any extra nodes. Technically,
all polygons reference the material index 0 already, so it
makes sense to add a material slot for this material index.
Differential Revision: https://developer.blender.org/D11439
Removing scripts that were placed in the source tree that would drive
the old buildbot. With the new buildbot in place these scripts aren't
being used anymore.
The buildbit is currently driven by
`build_files/config/pipeline_config.json`. In the near future make
update would also use this config.
Overview of the new buildbot: https://wiki.blender.org/wiki/Infrastructure/BuildBot
Work done by James Monteath.
message(FATAL_ERROR"32 bit compiler detected, blender no longer provides pre-build libraries for 32 bit windows, please set the LIBDIR cmake variable to your own library folder")
setBUILD_CMAKE_ARGS=%BUILD_CMAKE_ARGS% -G "Visual Studio %BUILD_VS_VER%%BUILD_VS_YEAR%%BUILD_GENERATOR_POST%"%BUILD_PLATFORM_SELECT%%TESTS_CMAKE_ARGS%%CLANG_CMAKE_ARGS%%ASAN_CMAKE_ARGS%%PYDEBUG_CMAKE_ARGS%
@@ -1254,12 +1254,19 @@ class CyclesObjectSettings(bpy.types.PropertyGroup):
)
shadow_terminator_offset:FloatProperty(
name="Shadow Terminator Offset",
name="Shadow Terminator Shading Offset",
description="Push the shadow terminator towards the light to hide artifacts on low poly geometry",
min=0.0,max=1.0,
default=0.0,
)
shadow_terminator_geometry_offset:FloatProperty(
name="Shadow Terminator Geometry Offset",
description="Offset rays from the surface to reduce shadow terminator artifact on low poly geometry. Only affects triangles at grazing angles to light",
min=0.0,max=1.0,
default=0.1,
)
is_shadow_catcher:BoolProperty(
name="Shadow Catcher",
description="Only render shadows on this object, for compositing renders into real footage",
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
