Center now works for multiple objects

Fixes mixing non active objects w/o UVs, when using UV tools/selection.

.arcconfig

@@ -2,6 +2,5 @@
 	"project_id" : "Blender",
 	"conduit_uri" : "https://developer.blender.org/",
 	"git.default-relative-commit" : "origin/blender2.8",
-	"arc.land.update.default" : "rebase",
-	"arc.land.onto.default" : "blender2.8"
+	"arc.land.update.default" : "rebase"
 }

.gitmodules

@@ -3,18 +3,22 @@
 	url = ../blender-addons.git
 	branch = blender2.8
 	ignore = all
+	branch = master
 [submodule "release/scripts/addons_contrib"]
 	path = release/scripts/addons_contrib
 	url = ../blender-addons-contrib.git
 	branch = master
 	ignore = all
+	branch = master
 [submodule "release/datafiles/locale"]
 	path = release/datafiles/locale
 	url = ../blender-translations.git
 	branch = master
 	ignore = all
+	branch = master
 [submodule "source/tools"]
 	path = source/tools
 	url = ../blender-dev-tools.git
 	branch = master
 	ignore = all
+	branch = master

CMakeLists.txt

@@ -66,12 +66,21 @@ endif()
 # set_property(GLOBAL PROPERTY RULE_MESSAGES OFF)
 
 # global compile definitions since add_definitions() adds for all.
-set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS
-	$<$<CONFIG:Debug>:DEBUG;_DEBUG>
-	$<$<CONFIG:Release>:NDEBUG>
-	$<$<CONFIG:MinSizeRel>:NDEBUG>
-	$<$<CONFIG:RelWithDebInfo>:NDEBUG>
-)
+
+if(NOT (${CMAKE_VERSION} VERSION_LESS 3.0))
+	set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS
+		$<$<CONFIG:Debug>:DEBUG;_DEBUG>
+		$<$<CONFIG:Release>:NDEBUG>
+		$<$<CONFIG:MinSizeRel>:NDEBUG>
+		$<$<CONFIG:RelWithDebInfo>:NDEBUG>
+	)
+else()
+	# keep until CMake-3.0 is min requirement
+	set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS_DEBUG           DEBUG _DEBUG)
+	set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS_RELEASE         NDEBUG)
+	set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS_MINSIZEREL      NDEBUG)
+	set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS_RELWITHDEBINFO  NDEBUG)
+endif()
 
 #-----------------------------------------------------------------------------
 # Set policy
@@ -156,6 +165,7 @@ option_defaults_init(
 	_init_OPENCOLORIO
 	_init_SDL
 	_init_FFTW3
+	_init_GAMEENGINE
 	_init_OPENSUBDIV
 )
 
@@ -225,6 +235,13 @@ option(WITH_FFTW3         "Enable FFTW3 support (Used for smoke, ocean sim, and
 option(WITH_BULLET        "Enable Bullet (Physics Engine)" ON)
 option(WITH_SYSTEM_BULLET "Use the systems bullet library (currently unsupported due to missing features in upstream!)" )
 mark_as_advanced(WITH_SYSTEM_BULLET)
+option(WITH_GAMEENGINE    "Enable Game Engine" ${_init_GAMEENGINE})
+if(APPLE)
+	set(WITH_GAMEENGINE_DECKLINK OFF)
+else()
+	option(WITH_GAMEENGINE_DECKLINK "Support BlackMagicDesign DeckLink cards in the Game Engine" ON)
+endif()
+option(WITH_PLAYER        "Build Player" OFF)
 option(WITH_OPENCOLORIO   "Enable OpenColorIO color management" ${_init_OPENCOLORIO})
 
 option(WITH_CLAY_ENGINE    "Enable Clay engine" ON)
@@ -310,6 +327,7 @@ option(WITH_IMAGE_TIFF          "Enable LibTIFF Support" ON)
 option(WITH_IMAGE_DDS           "Enable DDS Image Support" ON)
 option(WITH_IMAGE_CINEON        "Enable CINEON and DPX Image Support" ON)
 option(WITH_IMAGE_HDR           "Enable HDR Image Support" ON)
+option(WITH_IMAGE_FRAMESERVER   "Enable image FrameServer Support for rendering" ON)
 
 # Audio/Video format support
 option(WITH_CODEC_AVI           "Enable Blenders own AVI file support (raw/jpeg)" ON)
@@ -511,52 +529,6 @@ if(CMAKE_COMPILER_IS_GNUCC)
 	mark_as_advanced(WITH_LINKER_GOLD)
 endif()
 
-if(CMAKE_COMPILER_IS_GNUCC OR CMAKE_C_COMPILER_ID MATCHES "Clang")
-	option(WITH_COMPILER_ASAN "Build and link against address sanitizer (only for Debug & RelWithDebInfo targets)." OFF)
-	mark_as_advanced(WITH_COMPILER_ASAN)
-
-	if(WITH_COMPILER_ASAN)
-		set(_asan_defaults "\
--fsanitize=address \
--fsanitize=bool \
--fsanitize=bounds \
--fsanitize=enum \
--fsanitize=float-cast-overflow \
--fsanitize=float-divide-by-zero \
--fsanitize=nonnull-attribute \
--fsanitize=returns-nonnull-attribute \
--fsanitize=signed-integer-overflow \
--fsanitize=undefined \
--fsanitize=vla-bound \
--fno-sanitize=alignment \
-")
-
-		if(NOT MSVC) # not all sanitizers are supported with clang-cl, these two however are very vocal about it
-			set(_asan_defaults "${_asan_defaults} -fsanitize=leak -fsanitize=object-size" )
-		endif()
-		set(COMPILER_ASAN_CFLAGS "${_asan_defaults}" CACHE STRING "C flags for address sanitizer")
-		mark_as_advanced(COMPILER_ASAN_CFLAGS)
-		set(COMPILER_ASAN_CXXFLAGS "${_asan_defaults}" CACHE STRING "C++ flags for address sanitizer")
-		mark_as_advanced(COMPILER_ASAN_CXXFLAGS)
-
-		unset(_asan_defaults)
-
-		if(NOT MSVC)
-			find_library(COMPILER_ASAN_LIBRARY asan ${CMAKE_C_IMPLICIT_LINK_DIRECTORIES})
-		else()
-			find_library( COMPILER_ASAN_LIBRARY NAMES clang_rt.asan-x86_64
-				PATHS 	[HKEY_LOCAL_MACHINE\\SOFTWARE\\Wow6432Node\\LLVM\\LLVM;]/lib/clang/7.0.0/lib/windows
-						[HKEY_LOCAL_MACHINE\\SOFTWARE\\Wow6432Node\\LLVM\\LLVM;]/lib/clang/6.0.0/lib/windows
-						)
-		endif() 
-		mark_as_advanced(COMPILER_ASAN_LIBRARY)
-	endif()
-endif()
-
-# Dependency graph
-option(WITH_LEGACY_DEPSGRAPH "Build Blender with legacy dependency graph" ON)
-mark_as_advanced(WITH_LEGACY_DEPSGRAPH)
-
 if(WIN32)
 	# Use hardcoded paths or find_package to find externals
 	option(WITH_WINDOWS_FIND_MODULES "Use find_package to locate libraries" OFF)
@@ -608,13 +580,17 @@ endif()
 #-----------------------------------------------------------------------------
 # Check for conflicting/unsupported configurations
 
-if(NOT WITH_BLENDER AND NOT WITH_CYCLES_STANDALONE)
+if(NOT WITH_BLENDER AND NOT WITH_PLAYER AND NOT WITH_CYCLES_STANDALONE)
 	message(FATAL_ERROR
-		"At least one of WITH_BLENDER or WITH_CYCLES_STANDALONE "
-		"must be enabled, nothing to do!"
+		"At least one of WITH_BLENDER or WITH_PLAYER or "
+		"WITH_CYCLES_STANDALONE must be enabled, nothing to do!"
 	)
 endif()
 
+if(NOT WITH_GAMEENGINE AND WITH_PLAYER)
+	message(FATAL_ERROR "WITH_PLAYER requires WITH_GAMEENGINE")
+endif()
+
 if(NOT WITH_CXX11)
 	if(WITH_AUDASPACE AND NOT WITH_SYSTEM_AUDASPACE)
 		message(FATAL_ERROR "WITH_AUDASPACE requires WITH_CXX11")
@@ -628,6 +604,9 @@ if(NOT WITH_AUDASPACE)
 	if(WITH_JACK)
 		message(FATAL_ERROR "WITH_JACK requires WITH_AUDASPACE")
 	endif()
+	if(WITH_GAMEENGINE)
+		message(FATAL_ERROR "WITH_GAMEENGINE requires WITH_AUDASPACE")
+	endif()
 endif()
 
 if(NOT WITH_SDL AND WITH_GHOST_SDL)
@@ -635,6 +614,10 @@ if(NOT WITH_SDL AND WITH_GHOST_SDL)
 endif()
 
 # python module, needs some different options
+if(WITH_PYTHON_MODULE AND WITH_PLAYER)
+	message(FATAL_ERROR "WITH_PYTHON_MODULE requires WITH_PLAYER to be OFF")
+endif()
+
 if(WITH_PYTHON_MODULE AND WITH_PYTHON_INSTALL)
 	message(FATAL_ERROR "WITH_PYTHON_MODULE requires WITH_PYTHON_INSTALL to be OFF")
 endif()
@@ -817,21 +800,6 @@ set(PLATFORM_LINKLIBS "")
 set(PLATFORM_LINKFLAGS "")
 set(PLATFORM_LINKFLAGS_DEBUG "")
 
-if (NOT CMAKE_BUILD_TYPE MATCHES "Release")
-	if(WITH_COMPILER_ASAN)
-		set(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG} ${COMPILER_ASAN_CFLAGS}")
-		set(CMAKE_C_FLAGS_RELWITHDEBINFO "${CMAKE_C_FLAGS_RELWITHDEBINFO} ${COMPILER_ASAN_CFLAGS}")
-
-		set(CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG} ${COMPILER_ASAN_CXXFLAGS}")
-		set(CMAKE_CXX_FLAGS_RELWITHDEBINFO "${CMAKE_CXX_FLAGS_RELWITHDEBINFO} ${COMPILER_ASAN_CXXFLAGS}")
-		if(MSVC)
-			set(COMPILER_ASAN_LINKER_FLAGS "/FUNCTIONPADMIN:6") 
-		endif()
-		set(PLATFORM_LINKLIBS "${PLATFORM_LINKLIBS};${COMPILER_ASAN_LIBRARY}")
-		set(PLATFORM_LINKFLAGS "${COMPILER_ASAN_LIBRARY} ${COMPILER_ASAN_LINKER_FLAGS}")
-		set(PLATFORM_LINKFLAGS_DEBUG "${COMPILER_ASAN_LIBRARY} ${COMPILER_ASAN_LINKER_FLAGS}") 
-	endif()
-endif()
 
 #-----------------------------------------------------------------------------
 #Platform specifics
@@ -1561,12 +1529,7 @@ else()
 endif()
 
 # Visual Studio has all standards it supports available by default
-# Clang on windows copies this behavior and does not support these switches
-if(
-	CMAKE_COMPILER_IS_GNUCC OR
-	(CMAKE_C_COMPILER_ID MATCHES "Clang" AND (NOT MSVC)) OR
-	(CMAKE_C_COMPILER_ID MATCHES "Intel")
-)
+if(CMAKE_COMPILER_IS_GNUCC OR CMAKE_C_COMPILER_ID MATCHES "Clang" OR CMAKE_C_COMPILER_ID MATCHES "Intel")
 	# Use C99 + GNU extensions, works with GCC, Clang, ICC
 	if(WITH_C11)
 		set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -std=gnu11")
@@ -1620,7 +1583,7 @@ if(WITH_GTESTS)
 	include(GTestTesting)
 endif()
 
-if(WITH_BLENDER)
+if(WITH_BLENDER OR WITH_PLAYER)
 	add_subdirectory(intern)
 	add_subdirectory(extern)
 
@@ -1645,6 +1608,13 @@ if(WITH_BLENDER)
 endif()
 
 
+#-----------------------------------------------------------------------------
+# Blender Player
+if(WITH_PLAYER)
+	add_subdirectory(source/blenderplayer)
+endif()
+
+
 #-----------------------------------------------------------------------------
 # Testing
 add_subdirectory(tests)
@@ -1659,6 +1629,9 @@ include(build_files/cmake/packaging.cmake)
 if(WITH_BLENDER)
 	openmp_delayload(blender)
 endif()
+if(WITH_PLAYER)
+	openmp_delayload(blenderplayer)
+endif()
 
 #-----------------------------------------------------------------------------
 # Print Final Configuration
@@ -1692,6 +1665,8 @@ if(FIRST_RUN)
 	message(STATUS "C++ Compiler: \"${CMAKE_CXX_COMPILER_ID}\"")
 
 	info_cfg_text("Build Options:")
+	info_cfg_option(WITH_GAMEENGINE)
+	info_cfg_option(WITH_PLAYER)
 	info_cfg_option(WITH_BULLET)
 	info_cfg_option(WITH_IK_SOLVER)
 	info_cfg_option(WITH_IK_ITASC)

GNUmakefile

@@ -236,10 +236,9 @@ help: .FORCE
 	@echo "  * check_descriptions   - check for duplicate/invalid descriptions"
 	@echo ""
 	@echo "Utilities (not associated with building blender)"
-	@echo "  * icons      - updates PNG icons from SVG files."
-	@echo "  * icons_geom - updates Geometry icons from BLEND file."
-	@echo "  * tgz        - create a compressed archive of the source code."
-	@echo "  * update     - updates git and all submodules"
+	@echo "  * icons    - updates PNG icons from SVG files."
+	@echo "  * tgz      - create a compressed archive of the source code."
+	@echo "  * update   - updates git and all submodules"
 	@echo ""
 	@echo "Environment Variables"
 	@echo "  * BUILD_CMAKE_ARGS    - arguments passed to CMake."
@@ -424,12 +423,8 @@ icons: .FORCE
 	"$(BLENDER_DIR)/release/datafiles/blender_icons_update.py"
 	"$(BLENDER_DIR)/release/datafiles/prvicons_update.py"
 
-icons_geom: .FORCE
-	BLENDER_BIN="$(BUILD_DIR)/bin/blender" \
-	    "$(BLENDER_DIR)/release/datafiles/blender_icons_geom_update.py"
-
 update: .FORCE
-	if [ "$(OS_NCASE)" = "darwin" ] && [ ! -d "../lib/$(OS_NCASE)" ]; then \
+	if [ "$(OS_NCASE)" == "darwin" ] && [ ! -d "../lib/$(OS_NCASE)" ]; then \
 		svn checkout https://svn.blender.org/svnroot/bf-blender/trunk/lib/$(OS_NCASE) ../lib/$(OS_NCASE) ; \
 	fi
 	if [ -d "../lib" ]; then \

build_files/build_environment/cmake/ffmpeg.cmake

@@ -103,7 +103,6 @@ ExternalProject_Add(external_ffmpeg
 		--disable-indev=jack
 		--disable-indev=alsa
 		--disable-outdev=alsa
-		--disable-crystalhd
 	PATCH_COMMAND ${PATCH_CMD} --verbose -p 0 -N -d ${BUILD_DIR}/ffmpeg/src/external_ffmpeg < ${PATCH_DIR}/ffmpeg.diff
 	BUILD_COMMAND ${CONFIGURE_ENV_NO_PERL} && cd ${BUILD_DIR}/ffmpeg/src/external_ffmpeg/ && make -j${MAKE_THREADS}
 	INSTALL_COMMAND ${CONFIGURE_ENV_NO_PERL} && cd ${BUILD_DIR}/ffmpeg/src/external_ffmpeg/ && make install

build_files/build_environment/cmake/openal.cmake

@@ -39,6 +39,5 @@ if(BUILD_MODE STREQUAL Release)
 		PREFIX ${BUILD_DIR}/openal
 		CMAKE_ARGS -DCMAKE_INSTALL_PREFIX=${LIBDIR}/openal ${DEFAULT_CMAKE_FLAGS} ${OPENAL_EXTRA_ARGS}
 		INSTALL_DIR ${LIBDIR}/openal
-		PATCH_COMMAND ${PATCH_CMD} -p 1 -d ${BUILD_DIR}/openal/src/external_openal < ${PATCH_DIR}/openal.diff 
 	)
 endif()

build_files/build_environment/cmake/options.cmake

@@ -56,27 +56,24 @@ if(WIN32)
 	# For OIIO and OSL
 	set(COMMON_DEFINES /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS)
 
-	if(MSVC_VERSION GREATER 1909)
-		set(COMMON_MSVC_FLAGS "/Wv:18") #some deps with warnings as error aren't quite ready for dealing with the new 2017 warnings. 
-	endif()
-	
+	# TODO FIXME highly MSVC specific
 	if(WITH_OPTIMIZED_DEBUG)
-		set(BLENDER_CMAKE_C_FLAGS_DEBUG "/MTd ${COMMON_MSVC_FLAGS} /O2 /Ob2 /DNDEBUG /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
+		set(BLENDER_CMAKE_C_FLAGS_DEBUG "/MTd /O2 /Ob2 /DNDEBUG /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
 	else()
-		set(BLENDER_CMAKE_C_FLAGS_DEBUG "/MTd ${COMMON_MSVC_FLAGS} /Zi /Ob0 /Od /RTC1 /D_DEBUG /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
+		set(BLENDER_CMAKE_C_FLAGS_DEBUG "/MTd /Zi /Ob0 /Od /RTC1 /D_DEBUG /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
 	endif()
-	set(BLENDER_CMAKE_C_FLAGS_MINSIZEREL "/MT ${COMMON_MSVC_FLAGS} /O1 /Ob1 /D NDEBUG /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
-	set(BLENDER_CMAKE_C_FLAGS_RELEASE "/MT ${COMMON_MSVC_FLAGS} /O2 /Ob2 /DNDEBUG /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
-	set(BLENDER_CMAKE_C_FLAGS_RELWITHDEBINFO "/MT ${COMMON_MSVC_FLAGS} /Zi /O2 /Ob1 /D NDEBUG /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
+	set(BLENDER_CMAKE_C_FLAGS_MINSIZEREL "/MT /O1 /Ob1 /D NDEBUG /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
+	set(BLENDER_CMAKE_C_FLAGS_RELEASE "/MT /O2 /Ob2 /DNDEBUG /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
+	set(BLENDER_CMAKE_C_FLAGS_RELWITHDEBINFO "/MT /Zi /O2 /Ob1 /D NDEBUG /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
 
 	if(WITH_OPTIMIZED_DEBUG)
-		set(BLENDER_CMAKE_CXX_FLAGS_DEBUG "/MTd ${COMMON_MSVC_FLAGS} /O2 /Ob2 /D NDEBUG /D PLATFORM_WINDOWS /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
+		set(BLENDER_CMAKE_CXX_FLAGS_DEBUG "/MTd /O2 /Ob2 /D NDEBUG /D PLATFORM_WINDOWS /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
 	else()
-		set(BLENDER_CMAKE_CXX_FLAGS_DEBUG "/D_DEBUG /D PLATFORM_WINDOWS /MTd  ${COMMON_MSVC_FLAGS} /Zi /Ob0 /Od /RTC1 /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
+		set(BLENDER_CMAKE_CXX_FLAGS_DEBUG "/D_DEBUG /D PLATFORM_WINDOWS /MTd /Zi /Ob0 /Od /RTC1 /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
 	endif()
-	set(BLENDER_CMAKE_CXX_FLAGS_MINSIZEREL "/MT /${COMMON_MSVC_FLAGS} /O1 /Ob1 /D NDEBUG  /D PLATFORM_WINDOWS /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
-	set(BLENDER_CMAKE_CXX_FLAGS_RELEASE "/MT ${COMMON_MSVC_FLAGS} /O2 /Ob2 /D NDEBUG /D PLATFORM_WINDOWS /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
-	set(BLENDER_CMAKE_CXX_FLAGS_RELWITHDEBINFO "/MT ${COMMON_MSVC_FLAGS} /Zi /O2 /Ob1 /D NDEBUG /D PLATFORM_WINDOWS /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
+	set(BLENDER_CMAKE_CXX_FLAGS_MINSIZEREL "/MT /O1 /Ob1 /D NDEBUG  /D PLATFORM_WINDOWS /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
+	set(BLENDER_CMAKE_CXX_FLAGS_RELEASE "/MT /O2 /Ob2 /D NDEBUG /D PLATFORM_WINDOWS /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
+	set(BLENDER_CMAKE_CXX_FLAGS_RELWITHDEBINFO "/MT /Zi /O2 /Ob1 /D NDEBUG /D PLATFORM_WINDOWS /DPSAPI_VERSION=1 /DOIIO_STATIC_BUILD /DTINYFORMAT_ALLOW_WCHAR_STRINGS")
 
 	set(PLATFORM_FLAGS)
 	set(PLATFORM_CXX_FLAGS)

build_files/build_environment/patches/boost.diff

@@ -13,25 +13,3 @@
 -#     pragma message("Unknown compiler version - please run the configure tests and report the results")
 -#  endif
 -#endif
---- a/boost/type_traits/has_nothrow_assign.hpp	2015-12-13 05:49:42 -0700
-+++ b/boost/type_traits/has_nothrow_assign.hpp	2018-05-27 11:11:02 -0600
-@@ -24,7 +24,7 @@
- #include <boost/type_traits/remove_reference.hpp>
- #endif
- #endif
--#if defined(__GNUC__) || defined(__SUNPRO_CC)
-+#if defined(__GNUC__) || defined(__SUNPRO_CC) || defined(__clang__)
- #include <boost/type_traits/is_const.hpp>
- #include <boost/type_traits/is_volatile.hpp>
- #include <boost/type_traits/is_assignable.hpp>
---- a/boost/type_traits/has_nothrow_constructor.hpp	2015-12-13 05:49:42 -0700
-+++ b/boost/type_traits/has_nothrow_constructor.hpp	2018-05-27 11:11:02 -0600
-@@ -17,7 +17,7 @@
- #if defined(BOOST_MSVC) || defined(BOOST_INTEL)
- #include <boost/type_traits/has_trivial_constructor.hpp>
- #endif
--#if defined(__GNUC__ ) || defined(__SUNPRO_CC)
-+#if defined(__GNUC__ ) || defined(__SUNPRO_CC) || defined(__clang__)
- #include <boost/type_traits/is_default_constructible.hpp>
- #endif
- 

build_files/build_environment/patches/cmakelists_openvdb.txt

@@ -8,7 +8,7 @@ project(OpenVDB)
 
 # --------------------------------------------------------------------------------
 
-set(CMAKE_MODULE_PATH "${CMAKE_CURRENT_SOURCE_DIR}/cmake/modules")
+set(CMAKE_MODULE_PATH "${CMAKE_CURRENT_SOURCE_DIR}/cmake/Modules")
 
 # --------------------------------------------------------------------------------
 

build_files/build_environment/patches/cmakelists_tbb.txt

@@ -88,14 +88,6 @@ elseif(WIN32)
   set(DISABLE_RTTI "/EHs- /GR- ")
 endif()
 
-if ("${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU")
-  include(CheckCXXCompilerFlag)
-  check_cxx_compiler_flag("-flifetime-dse=1" SUPPORTS_FLIFETIME)
-  if (SUPPORTS_FLIFETIME)
-    add_definitions(-flifetime-dse=1)
-  endif()
-endif()
-
 # Linker export definitions
 if (WIN32)
   add_custom_command(OUTPUT tbb.def

build_files/build_environment/patches/openal.diff

@@ -1,13 +0,0 @@
-diff -Naur external_openal_original/CMakeLists.txt external_openal/CMakeLists.txt
---- external_openal_original/CMakeLists.txt	2016-01-24 20:12:39 -0700
-+++ external_openal/CMakeLists.txt	2018-06-02 12:16:52 -0600
-@@ -885,7 +885,8 @@
- OPTION(ALSOFT_REQUIRE_MMDEVAPI "Require MMDevApi backend" OFF)
- IF(HAVE_WINDOWS_H)
-     # Check MMSystem backend
--    CHECK_INCLUDE_FILES("windows.h;mmsystem.h" HAVE_MMSYSTEM_H -D_WIN32_WINNT=0x0502)
-+    set(CMAKE_REQUIRED_FLAGS "-D_WIN32_WINNT=0x0502")
-+    CHECK_INCLUDE_FILES("windows.h;mmsystem.h" HAVE_MMSYSTEM_H)
-     IF(HAVE_MMSYSTEM_H)
-         CHECK_SHARED_FUNCTION_EXISTS(waveOutOpen "windows.h;mmsystem.h" winmm "" HAVE_LIBWINMM)
-         IF(HAVE_LIBWINMM)

build_files/build_environment/patches/osl.diff

@@ -10,29 +10,3 @@ diff -Naur osl/src/external_osl/src/cmake/flexbison.cmake osl_bak/src/external_o
            MAIN_DEPENDENCY ${flexsrc}
            DEPENDS ${${compiler_headers}}
            WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR} )
---- osl/src/external_osl/src/include/OSL/oslconfig.h	2016-10-31 16:48:19 -0600
-+++ osl/src/external_osl/src/include/OSL/oslconfig.h	2018-05-27 11:18:08 -0600
-@@ -44,12 +44,18 @@
- // same if another packages is compiling against OSL and using these headers
- // (OSL may be C++11 but the client package may be older, or vice versa --
- // use these two symbols to differentiate these cases, when important).
--#if (__cplusplus >= 201402L)
--#  define OSL_CPLUSPLUS_VERSION  14
--#elif (__cplusplus >= 201103L)
--#  define OSL_CPLUSPLUS_VERSION  11
-+
-+// Force C++03 for MSVC in blender since svn the libraries are build with that
-+#if !defined(_MSC_VER)
-+	#if (__cplusplus >= 201402L)
-+	#  define OSL_CPLUSPLUS_VERSION  14
-+	#elif (__cplusplus >= 201103L)
-+	#  define OSL_CPLUSPLUS_VERSION  11
-+	#else
-+	#  define OSL_CPLUSPLUS_VERSION  3 /* presume C++03 */
-+	#endif
- #else
--#  define OSL_CPLUSPLUS_VERSION  3 /* presume C++03 */
-+	#  define OSL_CPLUSPLUS_VERSION  3 /* presume C++03 */
- #endif
- 
- // Symbol export defines

build_files/build_environment/windows/build_deps.cmd

@@ -14,18 +14,10 @@ if NOT "%1" == "" (
     set BuildDir=VS14
     goto par2
   )
-	if "%1" == "2017" (
-    echo "Building for VS2017"
-    set VSVER=15.0
-    set VSVER_SHORT=15
-    set BuildDir=VS15
-    goto par2
-  )
-  
 )
 :usage
 
-Echo Usage build_deps 2013/2015/2017 x64/x86
+Echo Usage build_deps 2013/2015 x64/x86
 goto exit
 :par2
 if NOT "%2" == "" (
@@ -39,10 +31,6 @@ if NOT "%2" == "" (
 		if "%1" == "2015" (
 			set CMAKE_BUILDER=Visual Studio 14 2015
 		)
-		if "%1" == "2017" (
-			set CMAKE_BUILDER=Visual Studio 15 2017
-		)
-		
     goto start
   )
 	if "%2" == "x64" (
@@ -55,10 +43,6 @@ if NOT "%2" == "" (
 		if "%1" == "2015" (
 			set CMAKE_BUILDER=Visual Studio 14 2015 Win64
 		)
-		if "%1" == "2017" (
-			set CMAKE_BUILDER=Visual Studio 15 2017 Win64
-		)
-		
     goto start
   )
 )

build_files/buildbot/config/blender_linux.cmake

@@ -21,8 +21,9 @@ else()
 	message(FATAL_ERROR "Unknown build environment")
 endif()
 
-# Default to only build Blender
+# Default to only build Blender, not the player
 set(WITH_BLENDER             ON  CACHE BOOL "" FORCE)
+set(WITH_PLAYER              OFF CACHE BOOL "" FORCE)
 
 # ######## Linux-specific build options ########
 # Options which are specific to Linux-only platforms
@@ -139,10 +140,6 @@ set(ZLIB_LIBRARY        "/usr/lib${MULTILIB}/libz.a"     CACHE STRING "" FORCE)
 # OpenVDB
 set(OPENVDB_LIBRARY
 	/opt/lib/openvdb/lib/libopenvdb.a
-	CACHE BOOL "" FORCE
-)
-
-set(BLOSC_LIBRARY
 	/opt/lib/blosc/lib/libblosc.a
 	CACHE BOOL "" FORCE
 )

build_files/buildbot/config/blender_linux_player.cmake

@@ -0,0 +1,12 @@
+# This is applied as an override on top of blender_linux.config
+# Disables all the areas which are not needed for the player.
+set(WITH_COMPOSITOR          OFF CACHE BOOL "" FORCE)
+set(WITH_CYCLES              OFF CACHE BOOL "" FORCE)
+set(WITH_FREESTYLE           OFF CACHE BOOL "" FORCE)
+set(WITH_GHOST_XDND          OFF CACHE BOOL "" FORCE)
+set(WITH_OPENCOLLADA         OFF CACHE BOOL "" FORCE)
+set(WITH_OPENSUBDIV          OFF CACHE BOOL "" FORCE)
+set(WITH_LIBMV               OFF CACHE BOOL "" FORCE)
+
+set(WITH_BLENDER             OFF CACHE BOOL "" FORCE)
+set(WITH_PLAYER              ON  CACHE BOOL "" FORCE)

build_files/buildbot/slave_compile.py

@@ -60,6 +60,7 @@ if 'cmake' in builder:
 
     # Config file to be used (relative to blender's sources root)
     cmake_config_file = "build_files/cmake/config/blender_full.cmake"
+    cmake_player_config_file = None
     cmake_cuda_config_file = None
 
     # Set build options.
@@ -100,13 +101,14 @@ if 'cmake' in builder:
         elif glibc == 'glibc211':
             deb_name = "squeeze"
         cmake_config_file = "build_files/buildbot/config/blender_linux.cmake"
+        cmake_player_config_file = "build_files/buildbot/config/blender_linux_player.cmake"
         if builder.endswith('x86_64_cmake'):
             chroot_name = 'buildbot_' + deb_name + '_x86_64'
-            targets = ['blender']
+            targets = ['player', 'blender']
         elif builder.endswith('i686_cmake'):
             bits = 32
             chroot_name = 'buildbot_' + deb_name + '_i686'
-            targets = ['blender']
+            targets = ['player', 'blender']
         cmake_extra_options.extend(["-DCMAKE_C_COMPILER=/usr/bin/gcc-7",
                                     "-DCMAKE_CXX_COMPILER=/usr/bin/g++-7"])
 
@@ -157,7 +159,9 @@ if 'cmake' in builder:
         os.chdir(target_build_dir)
         # Tweaking CMake options to respect the target
         target_cmake_options = cmake_options[:]
-        if target == 'cuda':
+        if target == 'player':
+            target_cmake_options.append("-C" + os.path.join(blender_dir, cmake_player_config_file))
+        elif target == 'cuda':
             target_cmake_options += cuda_cmake_options
             target_chroot_prefix = cuda_chroot_prefix[:]
             target_name = 'cycles_kernel_cuda'

build_files/buildbot/slave_pack.py

@@ -126,6 +126,7 @@ if builder.find('cmake') != -1:
 
     elif builder.startswith('linux_'):
         blender = os.path.join(install_dir, 'blender')
+        blenderplayer = os.path.join(install_dir, 'blenderplayer')
 
         buildinfo_h = os.path.join(build_dir, "source", "creator", "buildinfo.h")
         blender_h = os.path.join(blender_dir, "source", "blender", "blenkernel", "BKE_blender_version.h")
@@ -148,7 +149,7 @@ if builder.find('cmake') != -1:
         # Strip all unused symbols from the binaries
         print("Stripping binaries...")
         chroot_prefix = ['schroot', '-c', chroot_name, '--']
-        subprocess.call(chroot_prefix + ['strip', '--strip-all', blender])
+        subprocess.call(chroot_prefix + ['strip', '--strip-all', blender, blenderplayer])
 
         print("Stripping python...")
         py_target = os.path.join(install_dir, blender_version)

build_files/cmake/Modules/FindBlosc.cmake

@@ -1,72 +0,0 @@
-# - Find Blosc library
-# Find the native Blosc includes and library
-# This module defines
-#  BLOSC_INCLUDE_DIRS, where to find blosc.h, Set when
-#                    Blosc is found.
-#  BLOSC_LIBRARIES, libraries to link against to use Blosc.
-#  BLOSC_ROOT_DIR, The base directory to search for Blosc.
-#                This can also be an environment variable.
-#  BLOSC_FOUND, If false, do not try to use Blosc.
-#
-# also defined, but not for general use are
-#  BLOSC_LIBRARY, where to find the Blosc library.
-
-#=============================================================================
-# Copyright 2018 Blender Foundation.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-
-# If BLOSC_ROOT_DIR was defined in the environment, use it.
-IF(NOT BLOSC_ROOT_DIR AND NOT $ENV{BLOSC_ROOT_DIR} STREQUAL "")
-  SET(BLOSC_ROOT_DIR $ENV{BLOSC_ROOT_DIR})
-ENDIF()
-
-SET(_blosc_SEARCH_DIRS
-  ${BLOSC_ROOT_DIR}
-  /usr/local
-  /sw # Fink
-  /opt/local # DarwinPorts
-  /opt/lib/blosc
-)
-
-FIND_PATH(BLOSC_INCLUDE_DIR
-  NAMES
-    blosc.h
-  HINTS
-    ${_blosc_SEARCH_DIRS}
-  PATH_SUFFIXES
-    include
-)
-
-FIND_LIBRARY(BLOSC_LIBRARY
-  NAMES
-    blosc
-  HINTS
-    ${_blosc_SEARCH_DIRS}
-  PATH_SUFFIXES
-    lib64 lib
-  )
-
-# handle the QUIETLY and REQUIRED arguments and set BLOSC_FOUND to TRUE if
-# all listed variables are TRUE
-INCLUDE(FindPackageHandleStandardArgs)
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(BLOSC DEFAULT_MSG
-    BLOSC_LIBRARY BLOSC_INCLUDE_DIR)
-
-IF(BLOSC_FOUND)
-  SET(BLOSC_LIBRARIES ${BLOSC_LIBRARY})
-  SET(BLOSC_INCLUDE_DIRS ${BLOSC_INCLUDE_DIR})
-ELSE()
-  SET(BLOSC_BLOSC_FOUND FALSE)
-ENDIF()
-
-MARK_AS_ADVANCED(
-  BLOSC_INCLUDE_DIR
-  BLOSC_LIBRARY
-)

build_files/cmake/Modules/GTestTesting.cmake

@@ -32,7 +32,6 @@ macro(BLENDER_SRC_GTEST_EX NAME SRC EXTRA_LIBS DO_ADD_TEST)
 		                      ${EXTRA_LIBS}
 		                      ${PLATFORM_LINKLIBS}
 		                      bf_testing_main
-		                      bf_intern_eigen
 		                      bf_intern_guardedalloc
 		                      extern_gtest
 		                      extern_gmock

build_files/cmake/config/blender_full.cmake

@@ -16,6 +16,7 @@ set(WITH_CYCLES_OPENSUBDIV   ON  CACHE BOOL "" FORCE)
 set(WITH_FFTW3               ON  CACHE BOOL "" FORCE)
 set(WITH_LIBMV               ON  CACHE BOOL "" FORCE)
 set(WITH_LIBMV_SCHUR_SPECIALIZATIONS ON CACHE BOOL "" FORCE)
+set(WITH_GAMEENGINE          ON  CACHE BOOL "" FORCE)
 set(WITH_COMPOSITOR          ON  CACHE BOOL "" FORCE)
 set(WITH_FREESTYLE           ON  CACHE BOOL "" FORCE)
 set(WITH_GHOST_XDND          ON  CACHE BOOL "" FORCE)
@@ -23,6 +24,7 @@ set(WITH_IK_SOLVER           ON  CACHE BOOL "" FORCE)
 set(WITH_IK_ITASC            ON  CACHE BOOL "" FORCE)
 set(WITH_IMAGE_CINEON        ON  CACHE BOOL "" FORCE)
 set(WITH_IMAGE_DDS           ON  CACHE BOOL "" FORCE)
+set(WITH_IMAGE_FRAMESERVER   ON  CACHE BOOL "" FORCE)
 set(WITH_IMAGE_HDR           ON  CACHE BOOL "" FORCE)
 set(WITH_IMAGE_OPENEXR       ON  CACHE BOOL "" FORCE)
 set(WITH_IMAGE_OPENJPEG      ON  CACHE BOOL "" FORCE)
@@ -49,6 +51,7 @@ set(WITH_SDL                 ON  CACHE BOOL "" FORCE)
 set(WITH_X11_XINPUT          ON  CACHE BOOL "" FORCE)
 set(WITH_X11_XF86VMODE       ON  CACHE BOOL "" FORCE)
 
+set(WITH_PLAYER              ON  CACHE BOOL "" FORCE)
 set(WITH_MEM_JEMALLOC        ON  CACHE BOOL "" FORCE)
 
 

build_files/cmake/config/blender_headless.cmake

@@ -6,6 +6,7 @@
 #
 
 set(WITH_HEADLESS            ON  CACHE BOOL "" FORCE) 
+set(WITH_GAMEENGINE          OFF CACHE BOOL "" FORCE)
 
 # disable audio, its possible some devs may want this but for now disable
 # so the python module doesnt hold the audio device and loads quickly.

build_files/cmake/config/blender_lite.cmake

@@ -21,6 +21,7 @@ set(WITH_CYCLES_OPENSUBDIV   OFF CACHE BOOL "" FORCE)
 set(WITH_FFTW3               OFF CACHE BOOL "" FORCE)
 set(WITH_LIBMV               OFF CACHE BOOL "" FORCE)
 set(WITH_LLVM                OFF CACHE BOOL "" FORCE)
+set(WITH_GAMEENGINE          OFF CACHE BOOL "" FORCE)
 set(WITH_COMPOSITOR          OFF CACHE BOOL "" FORCE)
 set(WITH_FREESTYLE           OFF CACHE BOOL "" FORCE)
 set(WITH_GHOST_XDND          OFF CACHE BOOL "" FORCE)
@@ -28,6 +29,7 @@ set(WITH_IK_SOLVER           OFF CACHE BOOL "" FORCE)
 set(WITH_IK_ITASC            OFF CACHE BOOL "" FORCE)
 set(WITH_IMAGE_CINEON        OFF CACHE BOOL "" FORCE)
 set(WITH_IMAGE_DDS           OFF CACHE BOOL "" FORCE)
+set(WITH_IMAGE_FRAMESERVER   OFF CACHE BOOL "" FORCE)
 set(WITH_IMAGE_HDR           OFF CACHE BOOL "" FORCE)
 set(WITH_IMAGE_OPENEXR       OFF CACHE BOOL "" FORCE)
 set(WITH_IMAGE_OPENJPEG      OFF CACHE BOOL "" FORCE)

build_files/cmake/config/blender_release.cmake

@@ -16,6 +16,7 @@ set(WITH_CYCLES_OPENSUBDIV   ON  CACHE BOOL "" FORCE)
 set(WITH_FFTW3               ON  CACHE BOOL "" FORCE)
 set(WITH_LIBMV               ON  CACHE BOOL "" FORCE)
 set(WITH_LIBMV_SCHUR_SPECIALIZATIONS ON CACHE BOOL "" FORCE)
+set(WITH_GAMEENGINE          ON  CACHE BOOL "" FORCE)
 set(WITH_COMPOSITOR          ON  CACHE BOOL "" FORCE)
 set(WITH_FREESTYLE           ON  CACHE BOOL "" FORCE)
 set(WITH_GHOST_XDND          ON  CACHE BOOL "" FORCE)
@@ -23,6 +24,7 @@ set(WITH_IK_SOLVER           ON  CACHE BOOL "" FORCE)
 set(WITH_IK_ITASC            ON  CACHE BOOL "" FORCE)
 set(WITH_IMAGE_CINEON        ON  CACHE BOOL "" FORCE)
 set(WITH_IMAGE_DDS           ON  CACHE BOOL "" FORCE)
+set(WITH_IMAGE_FRAMESERVER   ON  CACHE BOOL "" FORCE)
 set(WITH_IMAGE_HDR           ON  CACHE BOOL "" FORCE)
 set(WITH_IMAGE_OPENEXR       ON  CACHE BOOL "" FORCE)
 set(WITH_IMAGE_OPENJPEG      ON  CACHE BOOL "" FORCE)
@@ -49,6 +51,7 @@ set(WITH_SDL                 ON  CACHE BOOL "" FORCE)
 set(WITH_X11_XINPUT          ON  CACHE BOOL "" FORCE)
 set(WITH_X11_XF86VMODE       ON  CACHE BOOL "" FORCE)
 
+set(WITH_PLAYER              ON  CACHE BOOL "" FORCE)
 set(WITH_MEM_JEMALLOC        ON  CACHE BOOL "" FORCE)
 set(WITH_CYCLES_CUDA_BINARIES ON  CACHE BOOL "" FORCE)
 set(CYCLES_CUDA_BINARIES_ARCH sm_30;sm_35;sm_37;sm_50;sm_52;sm_60;sm_61 CACHE STRING "" FORCE)

build_files/cmake/config/bpy_module.cmake

@@ -12,6 +12,9 @@ set(WITH_INSTALL_PORTABLE    OFF CACHE BOOL "" FORCE)
 # no point int copying python into python
 set(WITH_PYTHON_INSTALL      OFF CACHE BOOL "" FORCE)
 
+# dont build the game engine
+set(WITH_GAMEENGINE          OFF CACHE BOOL "" FORCE)
+
 # disable audio, its possible some devs may want this but for now disable
 # so the python module doesnt hold the audio device and loads quickly.
 set(WITH_AUDASPACE           OFF CACHE BOOL "" FORCE)

build_files/cmake/config/cycles_standalone.cmake

@@ -6,6 +6,7 @@
 
 # disable Blender
 set(WITH_BLENDER             OFF  CACHE BOOL "" FORCE)
+set(WITH_PLAYER              OFF  CACHE BOOL "" FORCE)
 set(WITH_CYCLES_BLENDER      OFF  CACHE BOOL "" FORCE)
 
 # build Cycles

build_files/cmake/macros.cmake

@@ -352,11 +352,6 @@ function(SETUP_LIBDIRS)
 	endif()
 endfunction()
 
-macro(setup_platform_linker_flags)
-	set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} ${PLATFORM_LINKFLAGS}")
-	set(CMAKE_EXE_LINKER_FLAGS_DEBUG "${CMAKE_EXE_LINKER_FLAGS_DEBUG} ${PLATFORM_LINKFLAGS_DEBUG}")
-endmacro()
-
 function(setup_liblinks
 	target
 	)
@@ -430,7 +425,7 @@ function(setup_liblinks
 			target_link_libraries(${target} ${OPENSUBDIV_LIBRARIES})
 	endif()
 	if(WITH_OPENVDB)
-		target_link_libraries(${target} ${OPENVDB_LIBRARIES} ${TBB_LIBRARIES} ${BLOSC_LIBRARIES})
+		target_link_libraries(${target} ${OPENVDB_LIBRARIES} ${TBB_LIBRARIES})
 	endif()
 	if(WITH_CYCLES_OSL)
 		target_link_libraries(${target} ${OSL_LIBRARIES})
@@ -586,10 +581,8 @@ function(SETUP_BLENDER_SORTED_LIBS)
 		bf_editor_space_outliner
 		bf_editor_space_script
 		bf_editor_space_sequencer
-		bf_editor_space_statusbar
 		bf_editor_space_text
 		bf_editor_space_time
-		bf_editor_space_topbar
 		bf_editor_space_userpref
 		bf_editor_space_view3d
 		bf_editor_space_clip
@@ -767,6 +760,10 @@ function(SETUP_BLENDER_SORTED_LIBS)
 		list_insert_after(BLENDER_SORTED_LIBS "ge_logic_ngnetwork" "extern_bullet")
 	endif()
 
+	if(WITH_GAMEENGINE_DECKLINK)
+		list(APPEND BLENDER_SORTED_LIBS bf_intern_decklink)
+	endif()
+
 	if(WIN32)
 		list(APPEND BLENDER_SORTED_LIBS bf_intern_gpudirect)
 	endif()

build_files/cmake/platform/platform_apple.cmake

@@ -358,7 +358,7 @@ if(WITH_LLVM)
 			execute_process(COMMAND ${LLVM_CONFIG} --libfiles
 					OUTPUT_VARIABLE LLVM_LIBRARY
 					OUTPUT_STRIP_TRAILING_WHITESPACE)
-			string(REPLACE ".a /" ".a;/" LLVM_LIBRARY ${LLVM_LIBRARY})
+			string(REPLACE " " ";" LLVM_LIBRARY ${LLVM_LIBRARY})
 		else()
 			set(PLATFORM_LINKFLAGS "${PLATFORM_LINKFLAGS} -lLLVM-3.4")
 		endif()
@@ -418,7 +418,7 @@ if(${XCODE_VERSION} VERSION_EQUAL 5 OR ${XCODE_VERSION} VERSION_GREATER 5)
 endif()
 # Get rid of eventually clashes, we export some symbols explicite as local
 set(PLATFORM_LINKFLAGS
-	"${PLATFORM_LINKFLAGS} -Xlinker -unexported_symbols_list -Xlinker '${CMAKE_SOURCE_DIR}/source/creator/osx_locals.map'"
+	"${PLATFORM_LINKFLAGS} -Xlinker -unexported_symbols_list -Xlinker ${CMAKE_SOURCE_DIR}/source/creator/osx_locals.map"
 )
 
 set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -stdlib=libc++")

build_files/cmake/platform/platform_unix.cmake

@@ -237,14 +237,10 @@ endif()
 if(WITH_OPENVDB)
 	find_package_wrapper(OpenVDB)
 	find_package_wrapper(TBB)
-	find_package_wrapper(Blosc)
 	if(NOT OPENVDB_FOUND OR NOT TBB_FOUND)
 		set(WITH_OPENVDB OFF)
 		set(WITH_OPENVDB_BLOSC OFF)
 		message(STATUS "OpenVDB not found, disabling it")
-	elseif(NOT BLOSC_FOUND)
-		set(WITH_OPENVDB_BLOSC OFF)
-		message(STATUS "Blosc not found, disabling it")
 	endif()
 endif()
 

build_files/cmake/platform/platform_win32.cmake

@@ -29,16 +29,7 @@ if(NOT MSVC)
 	message(FATAL_ERROR "Compiler is unsupported")
 endif()
 
-if(CMAKE_C_COMPILER_ID MATCHES "Clang")
-	set(MSVC_CLANG On)
-	set(VC_TOOLS_DIR $ENV{VCToolsRedistDir} CACHE STRING "Location of the msvc redistributables")
-	set(MSVC_REDIST_DIR ${VC_TOOLS_DIR})
-	if (DEFINED MSVC_REDIST_DIR)
-		file(TO_CMAKE_PATH ${MSVC_REDIST_DIR} MSVC_REDIST_DIR)
-	else()
-		message("Unable to detect the Visual Studio redist directory, copying of the runtime dlls will not work, try running from the visual studio developer prompt.")
-	endif()
-endif()
+# Libraries configuration for Windows when compiling with MSVC.
 
 set_property(GLOBAL PROPERTY USE_FOLDERS ${WINDOWS_USE_VISUAL_STUDIO_FOLDERS})
 
@@ -128,18 +119,8 @@ set(CMAKE_INSTALL_OPENMP_LIBRARIES ${WITH_OPENMP})
 set(CMAKE_INSTALL_SYSTEM_RUNTIME_DESTINATION .)
 include(InstallRequiredSystemLibraries)
 
-remove_cc_flag("/MDd" "/MD")
-
-if(MSVC_CLANG) # Clangs version of cl doesn't support all flags 
-	if(NOT WITH_CXX11) # C++11 is on by default in clang-cl and can't be turned off, if c++11 is not enabled in blender repress some c++11 related warnings. 
-		set(CXX_WARN_FLAGS "-Wno-inconsistent-missing-override")
-	endif()
-	set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${CXX_WARN_FLAGS} /nologo /J /Gd /EHsc -Wno-unused-command-line-argument -Wno-microsoft-enum-forward-reference ")
-	set(CMAKE_C_FLAGS     "${CMAKE_C_FLAGS} /nologo /J /Gd -Wno-unused-command-line-argument -Wno-microsoft-enum-forward-reference")
-else()
-	set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /nologo /J /Gd /MP /EHsc")
-	set(CMAKE_C_FLAGS     "${CMAKE_C_FLAGS} /nologo /J /Gd /MP")
-endif()
+set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /nologo /J /Gd /MP /EHsc")
+set(CMAKE_C_FLAGS     "${CMAKE_C_FLAGS} /nologo /J /Gd /MP")
 
 set(CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG} /MTd")
 set(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG} /MTd")
@@ -150,7 +131,7 @@ set(CMAKE_C_FLAGS_MINSIZEREL "${CMAKE_C_FLAGS_MINSIZEREL} /MT")
 set(CMAKE_CXX_FLAGS_RELWITHDEBINFO "${CMAKE_CXX_FLAGS_RELWITHDEBINFO} /MT")
 set(CMAKE_C_FLAGS_RELWITHDEBINFO "${CMAKE_C_FLAGS_RELWITHDEBINFO} /MT")
 
-set(PLATFORM_LINKFLAGS "${PLATFORM_LINKFLAGS} /SUBSYSTEM:CONSOLE /STACK:2097152 /INCREMENTAL:NO ")
+set(PLATFORM_LINKFLAGS "/SUBSYSTEM:CONSOLE /STACK:2097152 /INCREMENTAL:NO ")
 set(PLATFORM_LINKFLAGS "${PLATFORM_LINKFLAGS} /NODEFAULTLIB:msvcrt.lib /NODEFAULTLIB:msvcmrt.lib /NODEFAULTLIB:msvcurt.lib /NODEFAULTLIB:msvcrtd.lib ")
 
 # Ignore meaningless for us linker warnings.
@@ -163,7 +144,7 @@ else()
 	set(PLATFORM_LINKFLAGS "/MACHINE:IX86 /LARGEADDRESSAWARE ${PLATFORM_LINKFLAGS}")
 endif()
 
-set(PLATFORM_LINKFLAGS_DEBUG "${PLATFORM_LINKFLAGS_DEBUG} /IGNORE:4099 /NODEFAULTLIB:libcmt.lib /NODEFAULTLIB:libc.lib")
+set(PLATFORM_LINKFLAGS_DEBUG "/IGNORE:4099 /NODEFAULTLIB:libcmt.lib /NODEFAULTLIB:libc.lib")
 
 if(NOT DEFINED LIBDIR)
 

build_files/windows/autodetect_msvc.cmd

@@ -1,17 +0,0 @@
-echo No explicit msvc version requested, autodetecting version.
-
-call "%~dp0\detect_msvc2013.cmd"
-if %ERRORLEVEL% EQU 0 goto DetectionComplete
-
-call "%~dp0\detect_msvc2015.cmd"
-if %ERRORLEVEL% EQU 0 goto DetectionComplete
-
-call "%~dp0\detect_msvc2017.cmd"
-if %ERRORLEVEL% EQU 0 goto DetectionComplete
-
-echo Compiler Detection failed. Use verbose switch for more information. 
-exit /b 1
-
-:DetectionComplete
-echo Compiler Detection successfull, detected VS%BUILD_VS_YEAR%
-exit /b 0

build_files/windows/build_msbuild.cmd

@@ -1,26 +0,0 @@
-if "%NOBUILD%"=="1" goto EOF
-echo %TIME% > %BUILD_DIR%\buildtime.txt
-msbuild ^
-	%BUILD_DIR%\Blender.sln ^
-	/target:build ^
-	/property:Configuration=%BUILD_TYPE% ^
-	/maxcpucount:2 ^
-	/verbosity:minimal ^
-	/p:platform=%MSBUILD_PLATFORM% ^
-	/flp:Summary;Verbosity=minimal;LogFile=%BUILD_DIR%\Build.log 
-	if errorlevel 1 (
-		echo Error during build, see %BUILD_DIR%\Build.log for details 
-		exit /b 1
-	)
-
-msbuild ^
-	%BUILD_DIR%\INSTALL.vcxproj ^
-	/property:Configuration=%BUILD_TYPE% ^
-	/verbosity:minimal ^
-	/p:platform=%MSBUILD_PLATFORM% 
-	if errorlevel 1 (
-		echo Error during install phase
-		exit /b 1
-	)
-echo %TIME% >> %BUILD_DIR%\buildtime.txt
-:EOF

build_files/windows/build_ninja.cmd

@@ -1,16 +0,0 @@
-if "%NOBUILD%"=="1" goto EOF
-set HAS_ERROR=
-cd %BUILD_DIR%
-echo %TIME% > buildtime.txt
-ninja install
-if errorlevel 1 (
-		set HAS_ERROR=1
-	)
-echo %TIME% >>buildtime.txt
-cd %BLENDER_DIR%
-
-if "%HAS_ERROR%" == "1" (
-		echo Error during build
-		exit /b 1
-)
-:EOF

build_files/windows/check_libraries.cmd

@@ -1,54 +0,0 @@
-if "%BUILD_VS_YEAR%"=="2013" set BUILD_VS_LIBDIRPOST=vc12
-if "%BUILD_VS_YEAR%"=="2015" set BUILD_VS_LIBDIRPOST=vc14
-if "%BUILD_VS_YEAR%"=="2017" set BUILD_VS_LIBDIRPOST=vc14
-
-if "%BUILD_ARCH%"=="x64" (
-	set BUILD_VS_SVNDIR=win64_%BUILD_VS_LIBDIRPOST%
-) else if "%BUILD_ARCH%"=="x86" (
-	set BUILD_VS_SVNDIR=windows_%BUILD_VS_LIBDIRPOST%
-)
-set BUILD_VS_LIBDIR="%BLENDER_DIR%..\lib\%BUILD_VS_SVNDIR%"
-
-if NOT "%verbose%" == "" (
-	echo Library Directory = "%BUILD_VS_LIBDIR%"
-)
-if NOT EXIST %BUILD_VS_LIBDIR% (
-	rem libs not found, but svn is on the system
-	echo 
-	if not "%SVN%"=="" (
-		echo.
-		echo The required external libraries in %BUILD_VS_LIBDIR% are missing
-		echo.
-		set /p GetLibs= "Would you like to download them? (y/n)"
-		if /I "!GetLibs!"=="Y" (
-			echo.
-			echo Downloading %BUILD_VS_SVNDIR% libraries, please wait.
-			echo.
-:RETRY			
-			"%SVN%" checkout https://svn.blender.org/svnroot/bf-blender/trunk/lib/%BUILD_VS_SVNDIR% %BUILD_VS_LIBDIR%
-			if errorlevel 1 (
-				set /p LibRetry= "Error during donwload, retry? y/n"
-				if /I "!LibRetry!"=="Y" (
-					cd %BUILD_VS_LIBDIR%
-					"%SVN%" cleanup 
-					cd %BLENDER_DIR%
-					goto RETRY
-				)
-				echo.
-				echo Error: Download of external libraries failed. 
-				echo This is needed for building, please manually run 'svn cleanup' and 'svn update' in
-				echo %BUILD_VS_LIBDIR% , until this is resolved you CANNOT make a successfull blender build
-				echo.
-				exit /b 1
-			)
-		)
-	)
-)
-
-if NOT EXIST %BUILD_VS_LIBDIR% (
-	echo.
-	echo Error: Required libraries not found at "%BUILD_VS_LIBDIR%"
-	echo This is needed for building, aborting!
-	echo.
-	exit /b 1
-)

build_files/windows/check_spaces_in_path.cmd

@@ -1,6 +0,0 @@
-set BLENDER_DIR_NOSPACES=%BLENDER_DIR: =%
-
-if not "%BLENDER_DIR%"=="%BLENDER_DIR_NOSPACES%" (
-	echo There are spaces detected in the build path "%BLENDER_DIR%", this is currently not supported, exiting....
-	exit /b 1
-)

build_files/windows/check_submodules.cmd

@@ -1,20 +0,0 @@
-if NOT exist "%BLENDER_DIR%/source/tools" (
-	echo Checking out sub-modules 
-	if not "%GIT%" == "" (
-		"%GIT%" submodule update --init --recursive --progress
-		if errorlevel 1 goto FAIL
-		"%GIT%" submodule foreach git checkout master
-		if errorlevel 1 goto FAIL
-		"%GIT%" submodule foreach git pull --rebase origin master
-		if errorlevel 1 goto FAIL
-		goto EOF
-	) else (
-		echo Blender submodules not found, and git not found in path to retrieve them.
-		goto FAIL
-	)
-)
-goto EOF
-
-:FAIL
-exit /b 1
-:EOF

build_files/windows/configure_msbuild.cmd

@@ -1,74 +0,0 @@
-if "%BUILD_ARCH%"=="x64" (
-	set MSBUILD_PLATFORM=x64
-) else if "%BUILD_ARCH%"=="x86" (
-	set MSBUILD_PLATFORM=win32
-	if "%WITH_CLANG%"=="1" (
-		echo Clang not supported for X86
-		exit /b 1
-	)
-)
-
-if "%WITH_CLANG%"=="1" (
-	set CLANG_CMAKE_ARGS=-T"LLVM-vs2017"
-	if "%WITH_ASAN%"=="1" (
-		set ASAN_CMAKE_ARGS=-DWITH_COMPILER_ASAN=On
-	)
-) else (
-	if "%WITH_ASAN%"=="1" (
-		echo ASAN is only supported with clang.
-		exit /b 1 
-	)
-)
-set BUILD_CMAKE_ARGS=%BUILD_CMAKE_ARGS% -G "Visual Studio %BUILD_VS_VER% %BUILD_VS_YEAR%%WINDOWS_ARCH%" %TESTS_CMAKE_ARGS% %CLANG_CMAKE_ARGS% %ASAN_CMAKE_ARGS%
-
-if NOT EXIST %BUILD_DIR%\nul (
-	mkdir %BUILD_DIR%
-)
-
-if "%MUST_CLEAN%"=="1" (
-	echo Cleaning %BUILD_DIR%
-	msbuild ^
-		%BUILD_DIR%\Blender.sln ^
-		/target:clean ^
-		/property:Configuration=%BUILD_TYPE% ^
-		/verbosity:minimal ^
-		/p:platform=%MSBUILD_PLATFORM%
-)
-
-if NOT EXIST %BUILD_DIR%\Blender.sln set MUST_CONFIGURE=1
-if "%NOBUILD%"=="1" set MUST_CONFIGURE=1
-
-if "%MUST_CONFIGURE%"=="1" (
-
-	if NOT "%verbose%" == "" (
-		echo %CMAKE% %BUILD_CMAKE_ARGS% -H%BLENDER_DIR% -B%BUILD_DIR% 
-	)
-
-	cmake ^
-		%BUILD_CMAKE_ARGS% ^
-		-H%BLENDER_DIR% ^
-		-B%BUILD_DIR% 
-
-	if %ERRORLEVEL% NEQ 0 (
-		echo "Configuration Failed"
-		exit /b 1
-	)
-)
-
-echo call "%VCVARS%" %BUILD_ARCH% > %BUILD_DIR%\rebuild.cmd
-echo "%CMAKE%" . >> %BUILD_DIR%\rebuild.cmd
-echo echo %%TIME%% ^> buildtime.txt >> %BUILD_DIR%\rebuild.cmd
-echo msbuild ^
-	%BUILD_DIR%\Blender.sln ^
-	/target:build ^
-	/property:Configuration=%BUILD_TYPE% ^
-	/maxcpucount:2 ^
-	/verbosity:minimal ^
-	/p:platform=%MSBUILD_PLATFORM% ^
-	/flp:Summary;Verbosity=minimal;LogFile=%BUILD_DIR%\Build.log >> %BUILD_DIR%\rebuild.cmd
-echo msbuild ^
-	%BUILD_DIR%\INSTALL.vcxproj ^
-	/property:Configuration=%BUILD_TYPE% ^
-	/verbosity:minimal ^
-	/p:platform=%MSBUILD_PLATFORM% >> %BUILD_DIR%\rebuild.cmd
-echo echo %%TIME%% ^>^> buildtime.txt >> %BUILD_DIR%\rebuild.cmd

build_files/windows/configure_ninja.cmd

@@ -1,80 +0,0 @@
-ninja --version 1>NUL 2>&1
-if %ERRORLEVEL% NEQ 0 (
-		echo "Ninja not detected in the path"
-		exit /b 1
-	)
-
-set BUILD_CMAKE_ARGS=%BUILD_CMAKE_ARGS% -G "Ninja" %TESTS_CMAKE_ARGS% -DCMAKE_BUILD_TYPE=%BUILD_TYPE%
-
-if "%WITH_CLANG%" == "1" (
-set LLVM_DIR=
-	for /F "usebackq skip=2 tokens=1-2*" %%A IN (`REG QUERY "HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\LLVM\LLVM" /ve 2^>nul`) DO set LLVM_DIR=%%C
-	if DEFINED LLVM_DIR (
-		if NOT "%verbose%" == "" (
-			echo LLVM Detected at "%LLVM_DIR%"
-		)
-	goto DetectionComplete
-	)
-
-	REM Check 32 bits
-	for /F "usebackq skip=2 tokens=1-2*" %%A IN (`REG QUERY "HKEY_LOCAL_MACHINE\SOFTWARE\LLVM\LLVM" /ve 2^>nul`) DO set LLVM_DIR=%%C
-	if DEFINED LLVM_DIR (
-		if NOT "%verbose%" == "" (
-			echo LLVM Detected at "%LLVM_DIR%"
-		)
-		goto DetectionComplete
-	)
-	echo LLVM not found 
-	exit /b 1
-	
-:DetectionComplete	
-	set CC=%LLVM_DIR%\bin\clang-cl
-	set CXX=%LLVM_DIR%\bin\clang-cl
-	rem build and tested against 2017 15.7
-	set CFLAGS=-m64 -fmsc-version=1914
-	set CXXFLAGS=-m64 -fmsc-version=1914
-	if "%WITH_ASAN%"=="1" (
-		set BUILD_CMAKE_ARGS=%BUILD_CMAKE_ARGS% -DWITH_COMPILER_ASAN=On
-	)	
-)
-
-if "%WITH_ASAN%"=="1" (
-	if "%WITH_CLANG%" == "" (
-		echo ASAN is only supported with clang.
-		exit /b 1 
-	)
-)
-
-if NOT "%verbose%" == "" (
-	echo BUILD_CMAKE_ARGS=%BUILD_CMAKE_ARGS% 
-)
-
-if NOT EXIST %BUILD_DIR%\nul (
-	mkdir %BUILD_DIR%
-)
-
-if "%MUST_CLEAN%"=="1" (
-	echo Cleaning %BUILD_DIR%
-	cd %BUILD_DIR%
-	%CMAKE% cmake --build . --config Clean
-)
-
-if NOT EXIST %BUILD_DIR%\Blender.sln set MUST_CONFIGURE=1
-if "%NOBUILD%"=="1" set MUST_CONFIGURE=1
-
-if "%MUST_CONFIGURE%"=="1" (
-	cmake ^
-		%BUILD_CMAKE_ARGS% ^
-		-H%BLENDER_DIR% ^
-		-B%BUILD_DIR% 
-
-	if %ERRORLEVEL% NEQ 0 (
-		echo "Configuration Failed"
-		exit /b 1
-	)
-)
-
-echo call "%VCVARS%" %BUILD_ARCH% > %BUILD_DIR%\rebuild.cmd
-echo echo %%TIME%% ^> buildtime.txt >> %BUILD_DIR%\rebuild.cmd
-echo ninja install >> %BUILD_DIR%\rebuild.cmd 
-echo echo %%TIME%% ^>^> buildtime.txt >> %BUILD_DIR%\rebuild.cmd

build_files/windows/detect_architecture.cmd

@@ -1,16 +0,0 @@
-if "%BUILD_ARCH%"=="" (
-	if "%PROCESSOR_ARCHITECTURE%" == "AMD64" (
-		set WINDOWS_ARCH= Win64
-		set BUILD_ARCH=x64
-	) else if "%PROCESSOR_ARCHITEW6432%" == "AMD64" (
-		set WINDOWS_ARCH= Win64
-		set BUILD_ARCH=x64
-	) else (
-		set WINDOWS_ARCH=
-		set BUILD_ARCH=x86
-	)
-) else if "%BUILD_ARCH%"=="x64" (
-	set WINDOWS_ARCH= Win64
-) else if "%BUILD_ARCH%"=="x86" (
-	set WINDOWS_ARCH=
-)

build_files/windows/detect_msvc2013.cmd

@@ -1,3 +0,0 @@
-set BUILD_VS_VER=12
-set BUILD_VS_YEAR=2013
-call "%~dp0\detect_msvc_classic.cmd"

build_files/windows/detect_msvc2015.cmd

@@ -1,3 +0,0 @@
-set BUILD_VS_VER=14
-set BUILD_VS_YEAR=2015
-call "%~dp0\detect_msvc_classic.cmd"

build_files/windows/detect_msvc2017.cmd

@@ -1,75 +0,0 @@
-if NOT "%verbose%" == "" (
-	echo Detecting msvc 2017
-)
-set BUILD_VS_VER=15
-set ProgramFilesX86=%ProgramFiles(x86)%
-if not exist "%ProgramFilesX86%" set ProgramFilesX86=%ProgramFiles%
-
-set vs_where=%ProgramFilesX86%\Microsoft Visual Studio\Installer\vswhere.exe
-if not exist "%vs_where%" (
-	if NOT "%verbose%" == "" (
-		echo Visual Studio 2017 ^(15.2 or newer^) is not detected
-		goto FAIL
-	)
-)
-
-if NOT "%verbose%" == "" (
-		echo "%vs_where%" -latest %VSWHERE_ARGS% -requires Microsoft.VisualStudio.Component.VC.Tools.x86.x64`
-	)
-
-for /f "usebackq tokens=1* delims=: " %%i in (`"%vs_where%" -latest %VSWHERE_ARGS% -requires Microsoft.VisualStudio.Component.VC.Tools.x86.x64`) do (
-	if /i "%%i"=="installationPath" set VS_InstallDir=%%j
-)
-
-if "%VS_InstallDir%"=="" (
-	if NOT "%verbose%" == "" (
-		echo Visual Studio is detected but the "Desktop development with C++" workload has not been instlled
-		goto FAIL
-	)
-)
-
-set VCVARS=%VS_InstallDir%\VC\Auxiliary\Build\vcvarsall.bat
-if exist "%VCVARS%" (
-	call "%VCVARS%" %BUILD_ARCH%
-) else (
-	if NOT "%verbose%" == "" (
-		echo "%VCVARS%" not found
-	)
-	goto FAIL
-)
-
-rem try msbuild
-msbuild /version > NUL 
-if errorlevel 1 (
-	if NOT "%verbose%" == "" (
-		echo Visual Studio %BUILD_VS_YEAR% msbuild not found
-	)
-	goto FAIL
-)
-
-if NOT "%verbose%" == "" (
-		echo Visual Studio %BUILD_VS_YEAR% msbuild found 
-)
-
-REM try the c++ compiler
-cl 2> NUL 1>&2
-if errorlevel 1 (
-	if NOT "%verbose%" == "" (
-		echo Visual Studio %BUILD_VS_YEAR% C/C++ Compiler not found
-	)
-	goto FAIL
-)
-
-if NOT "%verbose%" == "" (
-		echo Visual Studio %BUILD_VS_YEAR% C/C++ Compiler found
-)
-
-if NOT "%verbose%" == "" (
-	echo Visual Studio 2017 is detected successfully  
-)
-goto EOF
-
-:FAIL
-exit /b 1 
-
-:EOF

build_files/windows/detect_msvc_classic.cmd

@@ -1,69 +0,0 @@
-if NOT "%verbose%" == "" (
-	echo Detecting msvc %BUILD_VS_YEAR%
-)
-set KEY_NAME="HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\VisualStudio\%BUILD_VS_VER%.0\Setup\VC"
-for /F "usebackq skip=2 tokens=1-2*" %%A IN (`REG QUERY %KEY_NAME% /v ProductDir 2^>nul`) DO set MSVC_VC_DIR=%%C
-if DEFINED MSVC_VC_DIR (
-	if NOT "%verbose%" == "" (
-		echo Visual Studio %BUILD_VS_YEAR% on Win64 detected at "%MSVC_VC_DIR%"
-	)
-	goto msvc_detect_finally
-)
-
-REM Check 32 bits
-set KEY_NAME="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\VisualStudio\%BUILD_VS_VER%.0\Setup\VC"
-for /F "usebackq skip=2 tokens=1-2*" %%A IN (`REG QUERY %KEY_NAME% /v ProductDir 2^>nul`) DO set MSVC_VC_DIR=%%C
-if DEFINED MSVC_VC_DIR (
-	if NOT "%verbose%" == "" (
-		echo Visual Studio %BUILD_VS_YEAR% on Win32 detected at "%MSVC_VC_DIR%"
-	)
-	goto msvc_detect_finally
-)
-if NOT "%verbose%" == "" (
-	echo Visual Studio %BUILD_VS_YEAR% not found. 
-)
-goto FAIL
-:msvc_detect_finally
-set VCVARS=%MSVC_VC_DIR%\vcvarsall.bat
-if not exist "%VCVARS%" (
-	echo "%VCVARS%" not found.
-	goto FAIL
-)
-
-call "%vcvars%" %BUILD_ARCH%
-
-rem try msbuild
-msbuild /version > NUL 
-if errorlevel 1 (
-	if NOT "%verbose%" == "" (
-		echo Visual Studio %BUILD_VS_YEAR% msbuild not found
-	)
-	goto FAIL
-)
-
-if NOT "%verbose%" == "" (
-		echo Visual Studio %BUILD_VS_YEAR% msbuild found 
-)
-
-REM try the c++ compiler
-cl 2> NUL 1>&2
-if errorlevel 1 (
-	if NOT "%verbose%" == "" (
-		echo Visual Studio %BUILD_VS_YEAR% C/C++ Compiler not found
-	)
-	goto FAIL
-)
-
-if NOT "%verbose%" == "" (
-		echo Visual Studio %BUILD_VS_YEAR% C/C++ Compiler found
-)
-goto DetectionComplete
-
-:FAIL
-exit /b 1
-
-:DetectionComplete
-if NOT "%verbose%" == "" (
-		echo Visual Studio %BUILD_VS_YEAR% Detected successfuly 
-)
-exit /b 0

build_files/windows/find_dependencies.cmd

@@ -1,13 +0,0 @@
-REM find all dependencies and set the corresponding environement variables. 
-for %%X in (svn.exe) do (set SVN=%%~$PATH:X)
-for %%X in (cmake.exe) do (set CMAKE=%%~$PATH:X)
-for %%X in (git.exe) do (set GIT=%%~$PATH:X)
-if NOT "%verbose%" == "" (
-	echo svn   : %SVN%
-	echo cmake : %CMAKE%
-	echo git   : %GIT%
-)
-if "%CMAKE%" == "" (
-	echo Cmake not found in path, required for building, exiting...
-	exit /b 1
-)

build_files/windows/parse_arguments.cmd

@@ -1,88 +0,0 @@
-set BUILD_DIR=%BLENDER_DIR%..\build_windows
-set BUILD_TYPE=Release
-:argv_loop
-if NOT "%1" == "" (
-
-	REM Help Message
-	if "%1" == "help" (
-		set SHOW_HELP=1
-		goto EOF
-	)
-	REM Build Types
-	if "%1" == "debug" (
-		set BUILD_TYPE=Debug
-	REM Build Configurations
-	) else if "%1" == "noge" (
-		set BUILD_CMAKE_ARGS=%BUILD_CMAKE_ARGS% -DWITH_GAMEENGINE=OFF -DWITH_PLAYER=OFF
-		set BUILD_NGE=_noge
-	) else if "%1" == "builddir" (
-		set BUILD_DIR_OVERRRIDE="%BLENDER_DIR%..\%2"
-		shift /1
-	) else if "%1" == "with_tests" (
-		set TESTS_CMAKE_ARGS=-DWITH_GTESTS=On
-	) else if "%1" == "full" (
-		set TARGET=Full
-		set BUILD_CMAKE_ARGS=%BUILD_CMAKE_ARGS% ^
-		    -C"%BLENDER_DIR%\build_files\cmake\config\blender_full.cmake"
-	) else if "%1" == "lite" (
-		set TARGET=Lite
-		set BUILD_CMAKE_ARGS=%BUILD_CMAKE_ARGS% -C"%BLENDER_DIR%\build_files\cmake\config\blender_lite.cmake"
-	) else if "%1" == "cycles" (
-		set TARGET=Cycles
-		set BUILD_CMAKE_ARGS=%BUILD_CMAKE_ARGS% -C"%BLENDER_DIR%\build_files\cmake\config\cycles_standalone.cmake"
-	) else if "%1" == "headless" (
-		set TARGET=Headless
-		set BUILD_CMAKE_ARGS=%BUILD_CMAKE_ARGS% -C"%BLENDER_DIR%\build_files\cmake\config\blender_headless.cmake"
-	) else if "%1" == "bpy" (
-		set TARGET=Bpy
-		set BUILD_CMAKE_ARGS=%BUILD_CMAKE_ARGS% -C"%BLENDER_DIR%\build_files\cmake\config\bpy_module.cmake"
-	) else if "%1" == "clang" (
-		set BUILD_CMAKE_ARGS=%BUILD_CMAKE_ARGS%
-		set WITH_CLANG=1
-	) else if "%1" == "release" (
-		set BUILD_CMAKE_ARGS=%BUILD_CMAKE_ARGS% -C"%BLENDER_DIR%\build_files\cmake\config\blender_release.cmake"
-		set TARGET=Release
-	) else if "%1" == "asan" (
-		set WITH_ASAN=1
-	) else if "%1" == "x86" (
-		set BUILD_ARCH=x86
-	) else if "%1" == "x64" (
-		set BUILD_ARCH=x64
-	) else if "%1" == "2017" (
-		set BUILD_VS_YEAR=2017
-	) else if "%1" == "2017pre" (
-		set BUILD_VS_YEAR=2017
-		set VSWHERE_ARGS=-prerelease
-		set BUILD_VS_YEAR=2017
-	) else if "%1" == "2017b" (
-		set BUILD_VS_YEAR=2017
-		set VSWHERE_ARGS=-products Microsoft.VisualStudio.Product.BuildTools
-	) else if "%1" == "2015" (
-		set BUILD_VS_YEAR=2015
-	) else if "%1" == "2013" (
-		set BUILD_VS_YEAR=2013
-	) else if "%1" == "packagename" (
-		set BUILD_CMAKE_ARGS=%BUILD_CMAKE_ARGS% -DCPACK_OVERRIDE_PACKAGENAME="%2"
-		shift /1
-	) else if "%1" == "nobuild" (
-		set NOBUILD=1
-	) else if "%1" == "showhash" (
-		SET BUILD_SHOW_HASHES=1
-	REM Non-Build Commands
-	) else if "%1" == "update" (
-		SET BUILD_UPDATE=1
-	) else if "%1" == "ninja" (
-		SET BUILD_WITH_NINJA=1
-	) else if "%1" == "clean" (
-		set MUST_CLEAN=1
-	) else if "%1" == "verbose" (
-		set VERBOSE=1
-	) else (
-		echo Command "%1" unknown, aborting!
-		exit /b 1
-	)
-	shift /1
-	goto argv_loop
-)
-:EOF
-exit /b 0

build_files/windows/reset_variables.cmd

@@ -1,27 +0,0 @@
-rem reset all variables so they do not get accidentally get carried over from previous builds
-set BUILD_DIR_OVERRRIDE=
-set BUILD_CMAKE_ARGS=
-set BUILD_ARCH=
-set BUILD_VS_VER=
-set BUILD_VS_YEAR=
-set BUILD_VS_LIBDIRPOST=
-set BUILD_VS_LIBDIR=
-set BUILD_VS_SVNDIR=
-set BUILD_NGE=
-set KEY_NAME=
-set MSBUILD_PLATFORM=
-set MUST_CLEAN=
-set NOBUILD=
-set TARGET=
-set VERBOSE=
-set WINDOWS_ARCH=
-set TESTS_CMAKE_ARGS=
-set VSWHERE_ARGS=
-set BUILD_UPDATE=
-set BUILD_SHOW_HASHES=
-set SHOW_HELP=
-set BUILD_WITH_NINJA=
-set WITH_CLANG=
-set WITH_ASAN=
-set CLANG_CMAKE_ARGS=
-set ASAN_CMAKE_ARGS=

build_files/windows/set_build_dir.cmd

@@ -1,4 +0,0 @@
-set BUILD_DIR=%BUILD_DIR%_%TARGET%%BUILD_NGE%_%BUILD_ARCH%_vc%BUILD_VS_VER%_%BUILD_TYPE%
-if NOT "%BUILD_DIR_OVERRRIDE%"=="" (
-	set BUILD_DIR=%BUILD_DIR_OVERRRIDE%
-)

build_files/windows/show_hashes.cmd

@@ -1,12 +0,0 @@
-if "%GIT%" == "" (
-	echo Git not found, cannot show hashes.
-	goto EOF
-)
-cd "%BLENDER_DIR%"
-for /f "delims=" %%i in ('%GIT% rev-parse HEAD') do echo Branch_hash=%%i
-cd "%BLENDER_DIR%/release/datafiles/locale"
-for /f "delims=" %%i in ('%GIT% rev-parse HEAD') do echo Locale_hash=%%i
-cd "%BLENDER_DIR%/release/scripts/addons"
-for /f "delims=" %%i in ('%GIT% rev-parse HEAD') do echo Addons_Hash=%%i
-cd "%BLENDER_DIR%"
-:EOF

build_files/windows/show_help.cmd

@@ -1,35 +0,0 @@
-echo.
-echo Convenience targets
-echo - release ^(identical to the official blender.org builds^)
-echo - full ^(same as release minus the cuda kernels^)
-echo - lite
-echo - headless
-echo - cycles
-echo - bpy
-echo.
-echo Utilities ^(not associated with building^)
-echo - clean ^(Target must be set^)
-echo - update
-echo - nobuild ^(only generate project files^)
-echo - showhash ^(Show git hashes of source tree^)
-echo.
-echo Configuration options
-echo - verbose ^(enable diagnostic output during configuration^)
-echo - with_tests ^(enable building unit tests^)
-echo - noge ^(disable building game enginge and player^)
-echo - debug ^(Build an unoptimized debuggable build^)
-echo - packagename [newname] ^(override default cpack package name^)
-echo - buildir [newdir] ^(override default build folder^)
-echo - x86 ^(override host auto-detect and build 32 bit code^)
-echo - x64 ^(override host auto-detect and build 64 bit code^)
-echo - 2013 ^(build with visual studio 2013^)
-echo.
-echo Experimental options
-echo - 2015 ^(build with visual studio 2015^)
-echo - 2017 ^(build with visual studio 2017^)
-echo - 2017pre ^(build with visual studio 2017 pre-release^)
-echo - 2017b ^(build with visual studio 2017 Build Tools^)
-echo - clang ^(enable building with clang^)
-echo - asan ^(enable asan when building with clang^)
-echo - ninja ^(enable building with ninja instead of msbuild^)
-echo.

build_files/windows/update_sources.cmd

@@ -1,16 +0,0 @@
-if "%SVN%" == "" (
-	echo svn not found, cannot update libraries
-	goto UPDATE_GIT
-)
-"%SVN%" up "%BLENDER_DIR%/../lib/*"
-
-:UPDATE_GIT
-
-if "%GIT%" == "" (
-	echo Git not found, cannot update code
-	goto EOF
-)
-"%GIT%" pull --rebase
-"%GIT%" submodule foreach git pull --rebase origin master
-
-:EOF

doc/doxygen/doxygen.source.h

@@ -36,6 +36,62 @@
 
 /* ================================ */
 
+/** \defgroup bge Game Engine */
+/** \defgroup gamelogic Game Logic
+ *  \ingroup bge
+ */
+/** \defgroup bgeconv Converter
+ *  \ingroup bge
+ */
+/** \defgroup blroutines Blender Routines
+ *  \ingroup bge
+ */
+/** \defgroup expressions Expressions
+ *  \ingroup bge
+ */
+/** \defgroup player Game Player
+ *  \ingroup bge
+ */
+/** \defgroup ketsji Ketsji
+ *  \ingroup bge
+ *  \todo check all headers and code files for proper licenses
+ */
+/** \defgroup ketsjinet Ketsji Network
+ *  \ingroup ketsji
+ */
+/** \defgroup bgenet Network
+ *  \ingroup bge
+ */
+/** \defgroup bgenetlb Loopback Network
+ *  \ingroup bgenet
+ */
+/** \defgroup phys Physics
+ *  \ingroup bge
+ */
+/** \defgroup physbullet Bullet Physics
+ *  \ingroup phys
+ */
+/** \defgroup physdummy Dummy Physics (none)
+ *  \ingroup phys
+ */
+/** \defgroup bgerast Rasterizer
+ *  \ingroup bge
+ */
+/** \defgroup bgerastoglfilters OpenGL Filters
+ *  \ingroup bgerast
+ */
+/** \defgroup bgerastogl OpenGL Rasterizer
+ *  \ingroup bgerast
+ */
+/** \defgroup bgesg BGE SceneGraph
+ *  \ingroup bge
+ */
+/** \defgroup bgevideotex BGE Video Texture
+ *  \ingroup bge
+ */
+
+/* ================================ */
+
 /** \defgroup blender Blender */
 
 /** \defgroup blt BlenTranslation
@@ -212,6 +268,10 @@
  *  \ingroup editors
  */
 
+/** \defgroup splogic game logic editor
+ *  \ingroup editors
+ */
+
 /** \defgroup spnla NLA editor
  *  \ingroup editors
  */

doc/python_api/examples/bge.constraints.py

@@ -0,0 +1,37 @@
+"""
+Basic Physics Constraint
+++++++++++++++++++++++++
+Example of how to create a hinge Physics Constraint between two objects.
+"""
+from bge import logic
+from bge import constraints
+
+# get object list
+objects = logic.getCurrentScene().objects
+
+# get object named Object1 and Object 2
+object_1 = objects["Object1"]
+object_2 = objects["Object2"]
+
+# want to use Edge constraint type
+constraint_type = 2
+
+# get Object1 and Object2 physics IDs
+physics_id_1 = object_1.getPhysicsId()
+physics_id_2 = object_2.getPhysicsId()
+
+# use bottom right edge of Object1 for hinge position
+edge_position_x = 1.0
+edge_position_y = 0.0
+edge_position_z = -1.0
+
+# rotate the pivot z axis about 90 degrees
+edge_angle_x = 0.0
+edge_angle_y = 0.0
+edge_angle_z = 90.0
+
+# create an edge constraint
+constraints.createConstraint(physics_id_1, physics_id_2,
+                             constraint_type,
+                             edge_position_x, edge_position_y, edge_position_z,
+                             edge_angle_x, edge_angle_y, edge_angle_z)

doc/python_api/examples/bge.texture.1.py

@@ -0,0 +1,40 @@
+"""
+Texture Replacement
++++++++++++++++++++
+
+Example of how to replace a texture in game with an external image.
+``createTexture()`` and ``removeTexture()`` are to be called from a
+module Python Controller.
+"""
+from bge import logic
+from bge import texture
+
+
+def createTexture(cont):
+    """Create a new Dynamic Texture"""
+    obj = cont.owner
+
+    # get the reference pointer (ID) of the internal texture
+    ID = texture.materialID(obj, 'IMoriginal.png')
+
+    # create a texture object
+    object_texture = texture.Texture(obj, ID)
+
+    # create a new source with an external image
+    url = logic.expandPath("//newtexture.jpg")
+    new_source = texture.ImageFFmpeg(url)
+
+    # the texture has to be stored in a permanent Python object
+    logic.texture = object_texture
+
+    # update/replace the texture
+    logic.texture.source = new_source
+    logic.texture.refresh(False)
+
+
+def removeTexture(cont):
+    """Delete the Dynamic Texture, reversing back the final to its original state."""
+    try:
+        del logic.texture
+    except:
+        pass

doc/python_api/examples/bge.texture.2.py

@@ -0,0 +1,237 @@
+"""
+Video Capture with DeckLink
++++++++++++++++++++++++++++
+Video frames captured with DeckLink cards have pixel formats that are generally not directly
+usable by OpenGL, they must be processed by a shader. The three shaders presented here should
+cover all common video capture cases.
+
+This file reflects the current video transfer method implemented in the Decklink module:
+whenever possible the video images are transferred as float texture because this is more
+compatible with GPUs. Of course, only the pixel formats that have a correspondant GL format
+can be transferred as float. Look for fg_shaders in this file for an exhaustive list.
+
+Other pixel formats will be transferred as 32 bits integer red-channel texture but this
+won't work with certain GPU (Intel GMA); the corresponding shaders are not shown here.
+However, it should not be necessary to use any of them as the list below covers all practical
+cases of video capture with all types of Decklink product.
+
+In other words, only use one of the pixel format below and you will be fine. Note that depending
+on the video stream, only certain pixel formats will be allowed (others will throw an exception).
+For example, to capture a PAL video stream, you must use one of the YUV formats.
+
+To find which pixel format is suitable for a particular video stream, use the 'Media Express'
+utility that comes with the Decklink software : if you see the video in the 'Log and Capture'
+Window, you have selected the right pixel format and you can use the same in Blender.
+
+Notes: * these shaders only decode the RGB channel and set the alpha channel to a fixed
+value (look for color.a = ). It's up to you to add postprocessing to the color.
+       * these shaders are compatible with 2D and 3D video stream
+"""
+import bge
+from bge import logic
+from bge import texture as vt
+
+# The default vertex shader, because we need one
+#
+VertexShader = """
+#version 130
+   void main()
+   {
+      gl_Position = gl_ModelViewProjectionMatrix * gl_Vertex;
+      gl_TexCoord[0] = gl_MultiTexCoord0;
+   }
+
+"""
+
+# For use with RGB video stream: the pixel is directly usable
+#
+FragmentShader_R10l = """
+    #version 130
+    uniform sampler2D tex;
+    // stereo = 1.0 if 2D image, =0.5 if 3D (left eye below, right eye above)
+    uniform float stereo;
+    // eye = 0.0 for the left eye, 0.5 for the right eye
+    uniform float eye;
+
+    void main(void)
+    {
+        vec4 color;
+        float tx, ty;
+        tx = gl_TexCoord[0].x;
+        ty = eye+gl_TexCoord[0].y*stereo;
+        color = texture(tex, vec2(tx,ty));
+        color.a = 0.7;
+        gl_FragColor = color;
+    }
+"""
+
+# For use with YUV video stream
+#
+FragmentShader_2vuy = """
+    #version 130
+    uniform sampler2D tex;
+    // stereo = 1.0 if 2D image, =0.5 if 3D (left eye below, right eye above)
+    uniform float stereo;
+    // eye = 0.0 for the left eye, 0.5 for the right eye
+    uniform float eye;
+
+    void main(void)
+    {
+        vec4 color;
+        float tx, ty, width, Y, Cb, Cr;
+        int px;
+        tx = gl_TexCoord[0].x;
+        ty = eye+gl_TexCoord[0].y*stereo;
+        width = float(textureSize(tex, 0).x);
+        color = texture(tex, vec2(tx, ty));
+        px = int(floor(fract(tx*width)*2.0));
+        switch (px) {
+        case 0:
+            Y = color.g;
+            break;
+        case 1:
+            Y = color.a;
+            break;
+        }
+        Y = (Y - 0.0625) * 1.168949772;
+        Cb = (color.b - 0.0625) * 1.142857143 - 0.5;
+        Cr = (color.r - 0.0625) * 1.142857143 - 0.5;
+        color.r = Y + 1.5748 * Cr;
+        color.g = Y - 0.1873 * Cb - 0.4681 * Cr;
+        color.b = Y + 1.8556 * Cb;
+        color.a = 0.7;
+        gl_FragColor = color;
+    }
+"""
+
+# For use with high resolution YUV
+#
+FragmentShader_v210 = """
+    #version 130
+    uniform sampler2D tex;
+    // stereo = 1.0 if 2D image, =0.5 if 3D (left eye below, right eye above)
+    uniform float stereo;
+    // eye = 0.0 for the left eye, 0.5 for the right eye
+    uniform float eye;
+
+    void main(void)
+    {
+        vec4 color, color1, color2, color3;
+        int px;
+        float tx, ty, width, sx, dx, bx, Y, Cb, Cr;
+        tx = gl_TexCoord[0].x;
+        ty = eye+gl_TexCoord[0].y*stereo;
+        width = float(textureSize(tex, 0).x);
+        // to sample macro pixels (6 pixels in 4 words)
+        sx = tx*width*0.25+0.01;
+        // index of display pixel in the macro pixel 0..5
+        px = int(floor(fract(sx)*6.0));
+        // increment as we sample the macro pixel
+        dx = 1.0/width;
+        // base x coord of macro pixel
+        bx = (floor(sx)+0.01)*dx*4.0;
+        color = texture(tex, vec2(bx, ty));
+        color1 = texture(tex, vec2(bx+dx, ty));
+        color2 = texture(tex, vec2(bx+dx*2.0, ty));
+        color3 = texture(tex, vec2(bx+dx*3.0, ty));
+        switch (px) {
+        case 0:
+        case 1:
+            Cb = color.b;
+            Cr = color.r;
+            break;
+        case 2:
+        case 3:
+            Cb = color1.g;
+            Cr = color2.b;
+            break;
+        default:
+            Cb = color2.r;
+            Cr = color3.g;
+            break;
+        }
+        switch (px) {
+        case 0:
+            Y = color.g;
+            break;
+        case 1:
+            Y = color1.b;
+            break;
+        case 2:
+            Y = color1.r;
+            break;
+        case 3:
+            Y = color2.g;
+            break;
+        case 4:
+            Y = color3.b;
+            break;
+        default:
+            Y = color3.r;
+            break;
+        }
+        Y = (Y - 0.0625) * 1.168949772;
+        Cb = (Cb - 0.0625) * 1.142857143 - 0.5;
+        Cr = (Cr - 0.0625) * 1.142857143 - 0.5;
+        color.r = Y + 1.5748 * Cr;
+        color.g = Y - 0.1873 * Cb - 0.4681 * Cr;
+        color.b = Y + 1.8556 * Cb;
+        color.a = 0.7;
+        gl_FragColor = color;
+    }
+"""
+
+# The exhausitve list of pixel formats that are transferred as float texture
+# Only use those for greater efficiency and compatiblity.
+#
+fg_shaders = {
+    '2vuy'       :FragmentShader_2vuy,
+    '8BitYUV'    :FragmentShader_2vuy,
+    'v210'       :FragmentShader_v210,
+    '10BitYUV'   :FragmentShader_v210,
+    '8BitBGRA'   :FragmentShader_R10l,
+    'BGRA'       :FragmentShader_R10l,
+    '8BitARGB'   :FragmentShader_R10l,
+    '10BitRGBXLE':FragmentShader_R10l,
+    'R10l'       :FragmentShader_R10l
+    }
+
+
+#
+# Helper function to attach a pixel shader to the material that receives the video frame.
+#
+
+def config_video(obj, format, pixel, is3D=False, mat=0, card=0):
+    if pixel not in fg_shaders:
+        raise('Unsuported shader')
+    shader = obj.meshes[0].materials[mat].getShader()
+    if shader is not None and not shader.isValid():
+        shader.setSource(VertexShader, fg_shaders[pixel], True)
+        shader.setSampler('tex', 0)
+        shader.setUniformEyef("eye")
+        shader.setUniform1f("stereo", 0.5 if is3D else 1.0)
+    tex = vt.Texture(obj, mat)
+    tex.source = vt.VideoDeckLink(format + "/" + pixel + ("/3D" if is3D else ""), card)
+    print("frame rate: ", tex.source.framerate)
+    tex.source.play()
+    obj["video"] = tex
+
+#
+# Attach this function to an object that has a material with texture
+# and call it once to initialize the object
+#
+def init(cont):
+    # config_video(cont.owner, 'HD720p5994', '8BitBGRA')
+    # config_video(cont.owner, 'HD720p5994', '8BitYUV')
+    # config_video(cont.owner, 'pal ', '10BitYUV')
+    config_video(cont.owner, 'pal ', '8BitYUV')
+
+
+#
+# To be called on every frame
+#
+def play(cont):
+    obj = cont.owner
+    video = obj.get("video")
+    if video is not None:
+        video.refresh(True)

doc/python_api/examples/bge.texture.py

@@ -0,0 +1,46 @@
+"""
+Basic Video Playback
+++++++++++++++++++++
+Example of how to replace a texture in game with a video.
+It needs to run everyframe.
+To avoid any confusion with the location of the file,
+we will use ``GameLogic.expandPath()`` to build an absolute file name,
+assuming the video file is in the same directory as the blend-file.
+"""
+import bge
+from bge import texture
+from bge import logic
+
+cont = logic.getCurrentController()
+obj = cont.owner
+
+# the creation of the texture must be done once: save the
+# texture object in an attribute of bge.logic module makes it persistent
+if not hasattr(logic, 'video'):
+
+    # identify a static texture by name
+    matID = texture.materialID(obj, 'IMvideo.png')
+
+    # create a dynamic texture that will replace the static texture
+    logic.video = texture.Texture(obj, matID)
+
+    # define a source of image for the texture, here a movie
+    movie = logic.expandPath('//trailer_400p.ogg')
+    logic.video.source = texture.VideoFFmpeg(movie)
+    logic.video.source.scale = True
+
+    # Note that we can change the ``Texture`` source at any time.
+    # Suppose we want to switch between two movies during the game:
+    logic.mySources[0] = texture.VideoFFmpeg('movie1.avi')
+    logic.mySources[1] = texture.VideoFFmpeg('movie2.avi')
+
+    #And then assign (and reassign) the source during the game
+    logic.video.source = logic.mySources[movieSel]
+
+    # quick off the movie, but it wont play in the background
+    logic.video.source.play()
+
+
+# Video playback is not a background process: it happens only when we refresh the texture.
+# So you need to call this function every frame to ensure update of the texture.
+logic.video.refresh(True)

doc/python_api/examples/blf.py

@@ -2,44 +2,43 @@
 Hello World Text Example
 ++++++++++++++++++++++++
 
-Example of using the blf module. For this module to work we
+Blender Game Engine example of using the blf module. For this module to work we
 need to use the OpenGL wrapper :class:`~bgl` as well.
 """
+# import game engine modules
+from bge import render
+from bge import logic
 # import stand alone modules
 import bgl
 import blf
-import bpy
 
-font_info = {
-    "font_id": 0,
-    "handler": None,
-}
 
 def init():
     """init function - runs once"""
-    import os
-    # Create a new font object, use external ttf file.
-    font_path = bpy.path.abspath('//Zeyada.ttf')
-    # Store the font indice - to use later.
-    if os.path.exists(font_path):
-        font_info["font_id"] = blf.load(font_path)
-    else:
-        # Default font.
-        font_info["font_id"] = 0
+    # create a new font object, use external ttf file
+    font_path = logic.expandPath('//Zeyada.ttf')
+    # store the font indice - to use later
+    logic.font_id = blf.load(font_path)
 
     # set the font drawing routine to run every frame
-    font_info["handler"] = bpy.types.SpaceView3D.draw_handler_add(
-        draw_callback_px, (None, None), 'WINDOW', 'POST_PIXEL')
+    scene = logic.getCurrentScene()
+    scene.post_draw = [write]
 
 
-def draw_callback_px(self, context):
-    """Draw on the viewports"""
+def write():
+    """write on screen"""
+    width = render.getWindowWidth()
+    height = render.getWindowHeight()
+
+    # OpenGL setup
+    bgl.glMatrixMode(bgl.GL_PROJECTION)
+    bgl.glLoadIdentity()
+    bgl.gluOrtho2D(0, width, 0, height)
+    bgl.glMatrixMode(bgl.GL_MODELVIEW)
+    bgl.glLoadIdentity()
+
     # BLF drawing routine
-    font_id = font_info["font_id"]
-    blf.position(font_id, 2, 80, 0)
+    font_id = logic.font_id
+    blf.position(font_id, (width * 0.2), (height * 0.3), 0)
     blf.size(font_id, 50, 72)
     blf.draw(font_id, "Hello World")
-
-
-if __name__ == '__main__':
-    init()

doc/python_api/examples/bpy.ops.2.py

@@ -20,6 +20,6 @@ The execution context is one of:
 'EXEC_SCREEN')
 """
 
-# collection add popup
+# group add popup
 import bpy
-bpy.ops.object.collection_instance_add('INVOKE_DEFAULT')
+bpy.ops.object.group_instance_add('INVOKE_DEFAULT')

doc/python_api/rst/bge.app.rst

@@ -0,0 +1,49 @@
+
+Application Data (bge.app)
+==========================
+
+Module to access application values that remain unchanged during runtime.
+
+.. module:: bge.app
+
+.. data:: version
+
+   The Blender/BGE version as a tuple of 3 ints, eg. (2, 75, 1).
+
+   .. note::
+
+      Version tuples can be compared simply with (in)equality symbols;
+      for example, ``(2, 74, 5) <= (2, 75, 0)`` returns True (lexical order).
+
+   :type: tuple of three ints
+
+.. data:: version_string
+
+   The Blender/BGE version formatted as a string, eg. "2.75 (sub 1)".
+
+   :type: str
+
+.. data:: version_char
+
+   The Blender/BGE version character (for minor releases).
+
+   :type: str
+
+.. data:: has_texture_ffmpeg
+
+   True if the BGE has been built with FFmpeg support,
+   enabling use of :class:`~bge.texture.ImageFFmpeg` and :class:`~bge.texture.VideoFFmpeg`.
+
+   :type: bool
+
+.. data:: has_joystick
+
+   True if the BGE has been built with joystick support.
+
+   :type: bool
+
+.. data:: has_physics
+
+   True if the BGE has been built with physics support.
+
+   :type: bool

doc/python_api/rst/bge.constraints.rst

@@ -0,0 +1,336 @@
+
+Physics Constraints (bge.constraints)
+=====================================
+
+.. module:: bge.constraints
+
+
+Examples
+--------
+
+.. include:: __/examples/bge.constraints.py
+   :start-line: 1
+   :end-line: 4
+
+.. literalinclude:: __/examples/bge.constraints.py
+   :lines: 6-
+
+
+Functions
+---------
+
+.. function:: createConstraint( \
+      physicsid_1, physicsid_2, constraint_type, \
+      pivot_x=0.0, pivot_y=0.0, pivot_z=0.0, \
+      axis_x=0.0, axis_y=0.0, axis_z=0.0, flag=0)
+
+   Creates a constraint.
+
+   :arg physicsid_1: The physics id of the first object in constraint.
+   :type physicsid_1: int
+
+   :arg physicsid_2: The physics id of the second object in constraint.
+   :type physicsid_2: int
+
+   :arg constraint_type: The type of the constraint, see `Create Constraint Constants`_.
+
+   :type constraint_type: int
+
+   :arg pivot_x: Pivot X position. (optional)
+   :type pivot_x: float
+
+   :arg pivot_y: Pivot Y position. (optional)
+   :type pivot_y: float
+
+   :arg pivot_z: Pivot Z position. (optional)
+   :type pivot_z: float
+
+   :arg axis_x: X axis angle in degrees. (optional)
+   :type axis_x: float
+
+   :arg axis_y: Y axis angle in degrees. (optional)
+   :type axis_y: float
+
+   :arg axis_z: Z axis angle in degrees. (optional)
+   :type axis_z: float
+
+   :arg flag: 128 to disable collision between linked bodies. (optional)
+   :type flag: int
+
+   :return: A constraint wrapper.
+   :rtype: :class:`~bge.types.KX_ConstraintWrapper`
+
+.. function:: exportBulletFile(filename)
+
+   Exports a file representing the dynamics world (usually using ``.bullet`` extension).
+
+   See `Bullet binary serialization <http://bulletphysics.org/mediawiki-1.5.8/index.php/Bullet_binary_serialization>`__.
+
+   :arg filename: File path.
+   :type filename: str
+
+.. function:: getAppliedImpulse(constraintId)
+
+   :arg constraintId: The id of the constraint.
+   :type constraintId: int
+
+   :return: The most recent applied impulse.
+   :rtype: float
+
+.. function:: getVehicleConstraint(constraintId)
+
+   :arg constraintId: The id of the vehicle constraint.
+   :type constraintId: int
+
+   :return: A vehicle constraint object.
+   :rtype: :class:`~bge.types.KX_VehicleWrapper`
+
+.. function:: getCharacter(gameobj)
+
+   :arg gameobj: The game object with the character physics.
+   :type gameobj: :class:`~bge.types.KX_GameObject`
+
+   :return: Character wrapper.
+   :rtype: :class:`~bge.types.KX_CharacterWrapper`
+
+.. function:: removeConstraint(constraintId)
+
+   Removes a constraint.
+
+   :arg constraintId: The id of the constraint to be removed.
+   :type constraintId: int
+
+.. function:: setCcdMode(ccdMode)
+
+   .. note::
+      Very experimental, not recommended
+
+   Sets the CCD (Continous Colision Detection) mode in the Physics Environment.
+
+   :arg ccdMode: The new CCD mode.
+   :type ccdMode: int
+
+.. function:: setContactBreakingTreshold(breakingTreshold)
+
+   .. note::
+      Reasonable default is 0.02 (if units are meters)
+
+   Sets tresholds to do with contact point management.
+
+   :arg breakingTreshold: The new contact breaking treshold.
+   :type breakingTreshold: float
+
+.. function:: setDeactivationAngularTreshold(angularTreshold)
+
+   Sets the angular velocity treshold.
+
+   :arg angularTreshold: New deactivation angular treshold.
+   :type angularTreshold: float
+
+.. function:: setDeactivationLinearTreshold(linearTreshold)
+
+   Sets the linear velocity treshold.
+
+   :arg linearTreshold: New deactivation linear treshold.
+   :type linearTreshold: float
+
+.. function:: setDeactivationTime(time)
+
+   Sets the time after which a resting rigidbody gets deactived.
+
+   :arg time: The deactivation time.
+   :type time: float
+
+.. function:: setDebugMode(mode)
+
+   Sets the debug mode.
+
+   :arg mode: The new debug mode, see `Debug Mode Constants`_.
+
+   :type mode: int
+
+.. function:: setGravity(x, y, z)
+
+   Sets the gravity force.
+
+   :arg x: Gravity X force.
+   :type x: float
+
+   :arg y: Gravity Y force.
+   :type y: float
+
+   :arg z: Gravity Z force.
+   :type z: float
+
+.. function:: setLinearAirDamping(damping)
+
+   .. note::
+
+      Not implemented
+
+   Sets the linear air damping for rigidbodies.
+
+.. function:: setNumIterations(numiter)
+
+   Sets the number of iterations for an iterative constraint solver.
+
+   :arg numiter: New number of iterations.
+   :type numiter: int
+
+.. function:: setNumTimeSubSteps(numsubstep)
+
+   Sets the number of substeps for each physics proceed. Tradeoff quality for performance.
+
+   :arg numsubstep: New number of substeps.
+   :type numsubstep: int
+
+.. function:: setSolverDamping(damping)
+
+   .. note::
+      Very experimental, not recommended
+
+   Sets the damper constant of a penalty based solver.
+
+   :arg damping: New damping for the solver.
+   :type damping: float
+
+.. function:: setSolverTau(tau)
+
+   .. note::
+      Very experimental, not recommended
+
+   Sets the spring constant of a penalty based solver.
+
+   :arg tau: New tau for the solver.
+   :type tau: float
+
+.. function:: setSolverType(solverType)
+
+   .. note::
+      Very experimental, not recommended
+
+   Sets the solver type.
+
+   :arg solverType: The new type of the solver.
+   :type solverType: int
+
+.. function:: setSorConstant(sor)
+
+   .. note::
+      Very experimental, not recommended
+
+   Sets the successive overrelaxation constant.
+
+   :arg sor: New sor value.
+   :type sor: float
+
+.. function:: setUseEpa(epa)
+
+   .. note::
+
+      Not implemented
+
+
+Constants
++++++++++
+
+.. attribute:: error
+
+   Symbolic constant string that indicates error.
+
+   :type: str
+
+
+Debug Mode Constants
+^^^^^^^^^^^^^^^^^^^^
+
+Debug mode to be used with :func:`setDebugMode`.
+
+
+.. data:: DBG_NODEBUG
+
+   No debug.
+
+.. data:: DBG_DRAWWIREFRAME
+
+   Draw wireframe in debug.
+
+.. data:: DBG_DRAWAABB
+
+   Draw Axis Aligned Bounding Box in debug.
+
+.. data:: DBG_DRAWFREATURESTEXT
+
+   Draw features text in debug.
+
+.. data:: DBG_DRAWCONTACTPOINTS
+
+   Draw contact points in debug.
+
+.. data:: DBG_NOHELPTEXT
+
+   Debug without help text.
+
+.. data:: DBG_DRAWTEXT
+
+   Draw text in debug.
+
+.. data:: DBG_PROFILETIMINGS
+
+   Draw profile timings in debug.
+
+.. data:: DBG_ENABLESATCOMPARISION
+
+   Enable sat comparision in debug.
+
+.. data:: DBG_DISABLEBULLETLCP
+
+   Disable Bullet LCP.
+
+.. data:: DBG_ENABLECCD
+
+   Enable Continous Collision Detection in debug.
+
+.. data:: DBG_DRAWCONSTRAINTS
+
+   Draw constraints in debug.
+
+.. data:: DBG_DRAWCONSTRAINTLIMITS
+
+   Draw constraint limits in debug.
+
+.. data:: DBG_FASTWIREFRAME
+
+   Draw a fast wireframe in debug.
+
+
+Create Constraint Constants
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Constraint type to be used with :func:`createConstraint`.
+
+
+.. data:: POINTTOPOINT_CONSTRAINT
+
+   .. to do
+
+.. data:: LINEHINGE_CONSTRAINT
+
+   .. to do
+
+.. data:: ANGULAR_CONSTRAINT
+
+   .. to do
+
+.. data:: CONETWIST_CONSTRAINT
+
+   .. to do
+
+.. data:: VEHICLE_CONSTRAINT
+
+   .. to do
+
+.. data:: GENERIC_6DOF_CONSTRAINT
+
+   .. to do
+

doc/python_api/rst/bge.events.rst

@@ -0,0 +1,250 @@
+
+Game Keys (bge.events)
+======================
+
+*****
+Intro
+*****
+
+This module holds key constants for the SCA_KeyboardSensor.
+
+.. module:: bge.events
+
+.. code-block:: python
+
+   # Set a connected keyboard sensor to accept F1
+   import bge
+
+   co = bge.logic.getCurrentController()
+   # 'Keyboard' is a keyboard sensor
+   sensor = co.sensors["Keyboard"]
+   sensor.key = bge.events.F1KEY
+
+   code-block:: python
+
+   # Do the all keys thing
+   import bge
+
+   co = bge.logic.getCurrentController()
+   # 'Keyboard' is a keyboard sensor
+   sensor = co.sensors["Keyboard"]
+
+   for key,status in sensor.events:
+   	# key[0] == bge.events.keycode, key[1] = status
+   	if status == bge.logic.KX_INPUT_JUST_ACTIVATED:
+   		if key == bge.events.WKEY:
+   			# Activate Forward!
+   		if key == bge.events.SKEY:
+   			# Activate Backward!
+   		if key == bge.events.AKEY:
+   			# Activate Left!
+   		if key == bge.events.DKEY:
+   			# Activate Right!
+
+   code-block:: python
+
+   # The all keys thing without a keyboard sensor (but you will
+   # need an always sensor with pulse mode on)
+   import bge
+
+   # Just shortening names here
+   keyboard = bge.logic.keyboard
+   JUST_ACTIVATED = bge.logic.KX_INPUT_JUST_ACTIVATED
+
+   if keyboard.events[bge.events.WKEY] == JUST_ACTIVATED:
+   	print("Activate Forward!")
+   if keyboard.events[bge.events.SKEY] == JUST_ACTIVATED:
+   	print("Activate Backward!")
+   if keyboard.events[bge.events.AKEY] == JUST_ACTIVATED:
+   	print("Activate Left!")
+   if keyboard.events[bge.events.DKEY] == JUST_ACTIVATED:
+   	print("Activate Right!")
+
+
+*********
+Functions
+*********
+
+.. function:: EventToString(event)
+
+   Return the string name of a key event. Will raise a ValueError error if its invalid.
+
+   :arg event: key event constant from :mod:`bge.events` or the keyboard sensor.
+   :type event: int
+   :rtype: string
+
+.. function:: EventToCharacter(event, shift)
+
+   Return the string name of a key event. Returns an empty string if the event cant be represented as a character.
+
+   :type event: int
+   :arg event: key event constant from :mod:`bge.events` or the keyboard sensor.
+   :type shift: bool
+   :arg shift: set to true if shift is held.
+   :rtype: string
+
+****************
+Keys (Constants)
+****************
+
+.. _mouse-keys:
+
+==========
+Mouse Keys
+==========
+
+.. data:: LEFTMOUSE
+.. data:: MIDDLEMOUSE
+.. data:: RIGHTMOUSE
+.. data:: WHEELUPMOUSE
+.. data:: WHEELDOWNMOUSE
+.. data:: MOUSEX
+.. data:: MOUSEY
+
+.. _keyboard-keys:
+
+=============
+Keyboard Keys
+=============
+
+-------------
+Alphabet keys
+-------------
+
+.. data:: AKEY
+.. data:: BKEY
+.. data:: CKEY
+.. data:: DKEY
+.. data:: EKEY
+.. data:: FKEY
+.. data:: GKEY
+.. data:: HKEY
+.. data:: IKEY
+.. data:: JKEY
+.. data:: KKEY
+.. data:: LKEY
+.. data:: MKEY
+.. data:: NKEY
+.. data:: OKEY
+.. data:: PKEY
+.. data:: QKEY
+.. data:: RKEY
+.. data:: SKEY
+.. data:: TKEY
+.. data:: UKEY
+.. data:: VKEY
+.. data:: WKEY
+.. data:: XKEY
+.. data:: YKEY
+.. data:: ZKEY
+
+-----------
+Number keys
+-----------
+
+.. data:: ZEROKEY
+.. data:: ONEKEY
+.. data:: TWOKEY
+.. data:: THREEKEY
+.. data:: FOURKEY
+.. data:: FIVEKEY
+.. data:: SIXKEY
+.. data:: SEVENKEY
+.. data:: EIGHTKEY
+.. data:: NINEKEY
+
+--------------
+Modifiers Keys
+--------------
+
+.. data:: CAPSLOCKKEY
+.. data:: LEFTCTRLKEY
+.. data:: LEFTALTKEY
+.. data:: RIGHTALTKEY
+.. data:: RIGHTCTRLKEY
+.. data:: RIGHTSHIFTKEY
+.. data:: LEFTSHIFTKEY
+
+----------
+Arrow Keys
+----------
+
+.. data:: LEFTARROWKEY
+.. data:: DOWNARROWKEY
+.. data:: RIGHTARROWKEY
+.. data:: UPARROWKEY
+
+--------------
+Numberpad Keys
+--------------
+
+.. data:: PAD0
+.. data:: PAD1
+.. data:: PAD2
+.. data:: PAD3
+.. data:: PAD4
+.. data:: PAD5
+.. data:: PAD6
+.. data:: PAD7
+.. data:: PAD8
+.. data:: PAD9
+.. data:: PADPERIOD
+.. data:: PADSLASHKEY
+.. data:: PADASTERKEY
+.. data:: PADMINUS
+.. data:: PADENTER
+.. data:: PADPLUSKEY
+
+-------------
+Function Keys
+-------------
+
+.. data:: F1KEY
+.. data:: F2KEY
+.. data:: F3KEY
+.. data:: F4KEY
+.. data:: F5KEY
+.. data:: F6KEY
+.. data:: F7KEY
+.. data:: F8KEY
+.. data:: F9KEY
+.. data:: F10KEY
+.. data:: F11KEY
+.. data:: F12KEY
+.. data:: F13KEY
+.. data:: F14KEY
+.. data:: F15KEY
+.. data:: F16KEY
+.. data:: F17KEY
+.. data:: F18KEY
+.. data:: F19KEY
+
+----------
+Other Keys
+----------
+
+.. data:: ACCENTGRAVEKEY
+.. data:: BACKSLASHKEY
+.. data:: BACKSPACEKEY
+.. data:: COMMAKEY
+.. data:: DELKEY
+.. data:: ENDKEY
+.. data:: EQUALKEY
+.. data:: ESCKEY
+.. data:: HOMEKEY
+.. data:: INSERTKEY
+.. data:: LEFTBRACKETKEY
+.. data:: LINEFEEDKEY
+.. data:: MINUSKEY
+.. data:: PAGEDOWNKEY
+.. data:: PAGEUPKEY
+.. data:: PAUSEKEY
+.. data:: PERIODKEY
+.. data:: QUOTEKEY
+.. data:: RIGHTBRACKETKEY
+.. data:: RETKEY (Deprecated: use bge.events.ENTERKEY)
+.. data:: ENTERKEY
+.. data:: SEMICOLONKEY
+.. data:: SLASHKEY
+.. data:: SPACEKEY
+.. data:: TABKEY

doc/python_api/rst/bge.render.rst

@@ -0,0 +1,425 @@
+
+Rasterizer (bge.render)
+=======================
+
+*****
+Intro
+*****
+
+.. module:: bge.render
+
+Example of using a :class:`bge.types.SCA_MouseSensor`,
+and two :class:`bge.types.KX_ObjectActuator` to implement MouseLook:
+
+.. note::
+   This can also be achieved with the :class:`bge.types.KX_MouseActuator`.
+
+.. code-block:: python
+
+   # To use a mouse movement sensor "Mouse" and a
+   # motion actuator to mouse look:
+   import bge
+
+   # scale sets the speed of motion
+   scale = 1.0, 0.5
+
+   co = bge.logic.getCurrentController()
+   obj = co.owner
+   mouse = co.sensors["Mouse"]
+   lmotion = co.actuators["LMove"]
+   wmotion = co.actuators["WMove"]
+
+   # Transform the mouse coordinates to see how far the mouse has moved.
+   def mousePos():
+      x = (bge.render.getWindowWidth() / 2 - mouse.position[0]) * scale[0]
+      y = (bge.render.getWindowHeight() / 2 - mouse.position[1]) * scale[1]
+      return (x, y)
+
+   pos = mousePos()
+
+   # Set the amount of motion: X is applied in world coordinates...
+   wmotion.useLocalTorque = False
+   wmotion.torque = ((0.0, 0.0, pos[0]))
+
+   # ...Y is applied in local coordinates
+   lmotion.useLocalTorque = True
+   lmotion.torque = ((-pos[1], 0.0, 0.0))
+
+   # Activate both actuators
+   co.activate(lmotion)
+   co.activate(wmotion)
+
+   # Centre the mouse
+   bge.render.setMousePosition(int(bge.render.getWindowWidth() / 2), int(bge.render.getWindowHeight() / 2))
+
+*********
+Constants
+*********
+
+.. data:: KX_TEXFACE_MATERIAL
+
+   Materials as defined by the texture face settings.
+
+.. data:: KX_BLENDER_MULTITEX_MATERIAL
+
+   Materials approximating blender materials with multitexturing.
+
+.. data:: KX_BLENDER_GLSL_MATERIAL
+
+   Materials approximating blender materials with GLSL.
+
+.. DATA:: VSYNC_OFF
+
+   Disables vsync
+
+.. DATA:: VSYNC_ON
+
+   Enables vsync
+
+.. DATA:: VSYNC_ADAPTIVE
+
+   Enables adaptive vsync if supported.
+   Adaptive vsync enables vsync if the framerate is above the monitors refresh rate.
+   Otherwise, vsync is diabled if the framerate is too low.
+
+.. data:: LEFT_EYE
+
+   Left eye being used during stereoscopic rendering.
+
+.. data:: RIGHT_EYE
+
+   Right eye being used during stereoscopic rendering.
+
+.. data:: RAS_OFS_RENDER_BUFFER
+
+   The pixel buffer for offscreen render is a RenderBuffer. Argument to :func:`offScreenCreate`
+
+.. data:: RAS_OFS_RENDER_TEXTURE
+
+   The pixel buffer for offscreen render is a Texture. Argument to :func:`offScreenCreate`
+
+
+*****
+Types
+*****
+
+.. class:: RASOffScreen
+
+   An off-screen render buffer object. 
+
+   Use :func:`offScreenCreate` to create it.
+   Currently it can only be used in the :class:`bge.texture.ImageRender`
+   constructor to render on a FBO rather than the default viewport.
+
+  .. attribute:: width
+
+     The width in pixel of the FBO
+
+     :type: integer
+
+  .. attribute:: height
+
+     The height in pixel of the FBO
+
+     :type: integer
+
+  .. attribute:: color
+
+     The underlying OpenGL bind code of the texture object that holds
+     the rendered image, 0 if the FBO is using RenderBuffer.
+     The choice between RenderBuffer and Texture is determined
+     by the target argument of :func:`offScreenCreate`.
+
+     :type: integer
+
+
+*********
+Functions
+*********
+
+.. function:: getWindowWidth()
+
+   Gets the width of the window (in pixels)
+
+   :rtype: integer
+
+.. function:: getWindowHeight()
+
+   Gets the height of the window (in pixels)
+
+   :rtype: integer
+
+.. function:: setWindowSize(width, height)
+
+   Set the width and height of the window (in pixels). This also works for fullscreen applications.
+
+   .. note:: Only works in the standalone player, not the Blender-embedded player.
+
+   :arg width: width in pixels
+   :type width: integer
+   :arg height: height in pixels
+   :type height: integer
+
+.. function:: setFullScreen(enable)
+
+   Set whether or not the window should be fullscreen.
+
+   .. note:: Only works in the standalone player, not the Blender-embedded player.
+
+   :arg enable: ``True`` to set full screen, ``False`` to set windowed.
+   :type enable: bool
+
+.. function:: getFullScreen()
+
+   Returns whether or not the window is fullscreen.
+
+   .. note:: Only works in the standalone player, not the Blender-embedded player; there it always returns False.
+
+   :rtype: bool
+
+.. function:: getDisplayDimensions()
+
+   Get the display dimensions, in pixels, of the display (e.g., the
+   monitor). Can return the size of the entire view, so the
+   combination of all monitors; for example, ``(3840, 1080)`` for two
+   side-by-side 1080p monitors.
+   
+   :rtype: tuple (width, height)
+
+.. function:: makeScreenshot(filename)
+
+   Writes an image file with the current displayed frame.
+
+   The image is written to *'filename'*.
+   The path may be absolute (eg. ``/home/foo/image``) or relative when started with
+   ``//`` (eg. ``//image``). Note that absolute paths are not portable between platforms.
+   If the filename contains a ``#``,
+   it will be replaced by an incremental index so that screenshots can be taken multiple
+   times without overwriting the previous ones (eg. ``image-#``).
+
+   Settings for the image are taken from the render settings (file format and respective settings,
+   gamma and colospace conversion, etc).
+   The image resolution matches the framebuffer, meaning, the window size and aspect ratio.
+   When running from the standalone player, instead of the embedded player, only PNG files are supported.
+   Additional color conversions are also not supported.
+
+   :arg filename: path and name of the file to write
+   :type filename: string
+
+
+.. function:: enableVisibility(visible)
+
+   Deprecated; doesn't do anything.
+
+
+.. function:: showMouse(visible)
+
+   Enables or disables the operating system mouse cursor.
+
+   :arg visible:
+   :type visible: boolean
+
+
+.. function:: setMousePosition(x, y)
+
+   Sets the mouse cursor position.
+
+   :arg x: X-coordinate in screen pixel coordinates.
+   :type x: integer
+   :arg y: Y-coordinate in screen pixel coordinates.
+   :type y: integer
+
+
+.. function:: setBackgroundColor(rgba)
+
+   Deprecated and no longer functional. Use :py:meth:`bge.types.KX_WorldInfo.backgroundColor` instead.
+
+
+.. function:: setEyeSeparation(eyesep)
+
+   Sets the eye separation for stereo mode. Usually Focal Length/30 provides a confortable value.
+
+   :arg eyesep: The distance between the left and right eye.
+   :type eyesep: float
+
+
+.. function:: getEyeSeparation()
+
+   Gets the current eye separation for stereo mode.
+
+   :rtype: float
+
+
+.. function:: setFocalLength(focallength)
+
+   Sets the focal length for stereo mode. It uses the current camera focal length as initial value.
+
+   :arg focallength: The focal length.
+   :type focallength: float
+
+.. function:: getFocalLength()
+
+   Gets the current focal length for stereo mode.
+
+   :rtype: float
+
+.. function:: getStereoEye()
+
+   Gets the current stereoscopy eye being rendered.
+   This function is mainly used in a :class:`bge.types.KX_Scene.pre_draw` callback
+   function to customize the camera projection matrices for each
+   stereoscopic eye.
+
+   :rtype: LEFT_EYE, RIGHT_EYE
+
+.. function:: setMaterialMode(mode)
+
+   Set the material mode to use for OpenGL rendering.
+
+   :arg mode: material mode
+   :type mode: KX_TEXFACE_MATERIAL, KX_BLENDER_MULTITEX_MATERIAL, KX_BLENDER_GLSL_MATERIAL
+
+   .. note:: Changes will only affect newly created scenes.
+
+
+.. function:: getMaterialMode(mode)
+
+   Get the material mode to use for OpenGL rendering.
+
+   :rtype: KX_TEXFACE_MATERIAL, KX_BLENDER_MULTITEX_MATERIAL, KX_BLENDER_GLSL_MATERIAL
+
+
+.. function:: setGLSLMaterialSetting(setting, enable)
+
+   Enables or disables a GLSL material setting.
+
+   :arg setting:
+   :type setting: string (lights, shaders, shadows, ramps, nodes, extra_textures)
+   :arg enable:
+   :type enable: boolean
+
+
+.. function:: getGLSLMaterialSetting(setting)
+
+   Get the state of a GLSL material setting.
+
+   :arg setting:
+   :type setting: string (lights, shaders, shadows, ramps, nodes, extra_textures)
+   :rtype: boolean
+
+.. function:: setAnisotropicFiltering(level)
+
+   Set the anisotropic filtering level for textures.
+
+   :arg level: The new anisotropic filtering level to use
+   :type level: integer (must be one of 1, 2, 4, 8, 16)
+
+   .. note:: Changing this value can cause all textures to be recreated, which can be slow.
+
+.. function:: getAnisotropicFiltering()
+
+   Get the anisotropic filtering level used for textures.
+
+   :rtype: integer (one of 1, 2, 4, 8, 16)
+
+.. function:: setMipmapping(value)
+
+   Change how to use mipmapping.
+
+   :type value: RAS_MIPMAP_NONE, RAS_MIPMAP_NEAREST, RAS_MIPMAP_LINEAR
+
+   .. note:: Changing this value can cause all textures to be recreated, which can be slow.
+
+.. function:: getMipmapping()
+
+   Get the current mipmapping setting.
+
+   :rtype: RAS_MIPMAP_NONE, RAS_MIPMAP_NEAREST, RAS_MIPMAP_LINEAR
+
+.. function:: drawLine(fromVec,toVec,color)
+
+   Draw a line in the 3D scene.
+
+   :arg fromVec: the origin of the line
+   :type fromVec: list [x, y, z]
+   :arg toVec: the end of the line
+   :type toVec: list [x, y, z]
+   :arg color: the color of the line
+   :type color: list [r, g, b]
+
+
+.. function:: enableMotionBlur(factor)
+
+   Enable the motion blur effect.
+
+   :arg factor: the ammount of motion blur to display.
+   :type factor: float [0.0 - 1.0]
+
+
+.. function:: disableMotionBlur()
+
+   Disable the motion blur effect.
+
+.. function:: showFramerate(enable)
+
+   Show or hide the framerate.
+
+   :arg enable:
+   :type enable: boolean
+
+.. function:: showProfile(enable)
+
+   Show or hide the profile.
+
+   :arg enable:
+   :type enable: boolean
+
+.. function:: showProperties(enable)
+
+   Show or hide the debug properties.
+
+   :arg enable:
+   :type enable: boolean
+
+.. function:: autoDebugList(enable)
+
+   Enable or disable auto adding debug properties to the debug list.
+
+   :arg enable:
+   :type enable: boolean
+
+.. function:: clearDebugList()
+
+   Clears the debug property list.
+
+.. function:: setVsync(value)
+
+   Set the vsync value
+
+   :arg value: One of VSYNC_OFF, VSYNC_ON, VSYNC_ADAPTIVE
+   :type value: integer
+
+.. function:: getVsync()
+
+   Get the current vsync value
+
+   :rtype: One of VSYNC_OFF, VSYNC_ON, VSYNC_ADAPTIVE
+
+.. function:: offScreenCreate(width,height[,samples=0][,target=bge.render.RAS_OFS_RENDER_BUFFER])
+
+   Create a Off-screen render buffer object.
+
+   :arg width: the width of the buffer in pixels
+   :type width: integer
+   :arg height: the height of the buffer in pixels
+   :type height: integer
+   :arg samples: the number of multisample for anti-aliasing (MSAA), 0 to disable MSAA
+   :type samples: integer
+   :arg target: the pixel storage: :data:`RAS_OFS_RENDER_BUFFER` to render on RenderBuffers (the default),
+      :data:`RAS_OFS_RENDER_TEXTURE` to render on texture. 
+      The later is interesting if you want to access the texture directly (see :attr:`RASOffScreen.color`).
+      Otherwise the default is preferable as it's more widely supported by GPUs and more efficient.
+      If the GPU does not support MSAA+Texture (e.g. Intel HD GPU), MSAA will be disabled.
+   :type target: integer
+   :rtype: :class:`RASOffScreen`
+

doc/python_api/rst/bge.types.rst

@@ -0,0 +1,38 @@
+
+Game Types (bge.types)
+======================
+
+.. module:: bge.types
+
+************
+Introduction
+************
+
+This module contains the classes that appear as instances in the Game Engine. A
+script must interact with these classes if it is to affect the behaviour of
+objects in a game.
+
+The following example would move an object (i.e. an instance of
+:class:`KX_GameObject`) one unit up.
+
+.. code-block:: python
+
+   # bge.types.SCA_PythonController
+   cont = bge.logic.getCurrentController()
+
+   # bge.types.KX_GameObject
+   obj = cont.owner
+   obj.worldPosition.z += 1
+
+To run the code, it could be placed in a Blender text block and executed with
+a :class:`SCA_PythonController` logic brick.
+
+*****
+Types
+*****
+
+.. toctree::
+   :glob:
+
+   bge.types.*
+

doc/python_api/rst/bge_types/bge.types.BL_ActionActuator.rst

@@ -0,0 +1,78 @@
+BL_ActionActuator(SCA_IActuator)
+================================
+
+.. module:: bge.types
+
+base class --- :class:`SCA_IActuator`
+
+.. class:: BL_ActionActuator(SCA_IActuator)
+
+   Action Actuators apply an action to an actor.
+
+   .. attribute:: action
+
+      The name of the action to set as the current action.
+
+      :type: string
+
+   .. attribute:: frameStart
+
+      Specifies the starting frame of the animation.
+
+      :type: float
+
+   .. attribute:: frameEnd
+
+      Specifies the ending frame of the animation.
+
+      :type: float
+
+   .. attribute:: blendIn
+
+      Specifies the number of frames of animation to generate when making transitions between actions.
+
+      :type: float
+
+   .. attribute:: priority
+
+      Sets the priority of this actuator. Actuators will lower priority numbers will override actuators with higher numbers.
+
+      :type: integer
+
+   .. attribute:: frame
+
+      Sets the current frame for the animation.
+
+      :type: float
+
+   .. attribute:: propName
+
+      Sets the property to be used in FromProp playback mode.
+
+      :type: string
+
+   .. attribute:: blendTime
+
+      Sets the internal frame timer. This property must be in the range from 0.0 to blendIn.
+
+      :type: float
+
+   .. attribute:: mode
+
+      The operation mode of the actuator. Can be one of :ref:`these constants<action-actuator>`.
+
+      :type: integer
+
+   .. attribute:: useContinue
+
+      The actions continue option, True or False. When True, the action will always play from where last left off,
+      otherwise negative events to this actuator will reset it to its start frame.
+
+      :type: boolean
+
+   .. attribute:: framePropName
+
+      The name of the property that is set to the current frame number.
+
+      :type: string
+

doc/python_api/rst/bge_types/bge.types.BL_ArmatureActuator.rst

@@ -0,0 +1,61 @@
+BL_ArmatureActuator(SCA_IActuator)
+==================================
+
+.. module:: bge.types
+
+base class --- :class:`SCA_IActuator`
+
+.. class:: BL_ArmatureActuator(SCA_IActuator)
+
+   Armature Actuators change constraint condition on armatures.
+
+   .. attribute:: type
+
+      The type of action that the actuator executes when it is active.
+
+      Can be one of :ref:`these constants <armatureactuator-constants-type>`
+
+      :type: integer
+
+   .. attribute:: constraint
+
+      The constraint object this actuator is controlling.
+
+      :type: :class:`BL_ArmatureConstraint`
+
+   .. attribute:: target
+
+      The object that this actuator will set as primary target to the constraint it controls.
+
+      :type: :class:`KX_GameObject`
+
+   .. attribute:: subtarget
+
+      The object that this actuator will set as secondary target to the constraint it controls.
+
+      :type: :class:`KX_GameObject`.
+      
+      .. note::
+      
+         Currently, the only secondary target is the pole target for IK constraint.
+
+   .. attribute:: weight
+
+      The weight this actuator will set on the constraint it controls.
+
+      :type: float.
+
+      .. note::
+      
+         Currently only the IK constraint has a weight. It must be a value between 0 and 1.
+
+      .. note::
+      
+         A weight of 0 disables a constraint while still updating constraint runtime values (see :class:`BL_ArmatureConstraint`)
+
+   .. attribute:: influence
+
+      The influence this actuator will set on the constraint it controls.
+
+      :type: float.
+

doc/python_api/rst/bge_types/bge.types.BL_ArmatureBone.rst

@@ -0,0 +1,105 @@
+BL_ArmatureBone(PyObjectPlus)
+=============================
+
+.. module:: bge.types
+
+base class --- :class:`PyObjectPlus`
+
+.. class:: BL_ArmatureBone(PyObjectPlus)
+
+   Proxy to Blender bone structure. All fields are read-only and comply to RNA names.
+   All space attribute correspond to the rest pose.
+
+   .. attribute:: name
+
+      bone name.
+
+      :type: string
+
+   .. attribute:: connected
+
+      true when the bone head is struck to the parent's tail.
+
+      :type: boolean
+
+   .. attribute:: hinge
+
+      true when bone doesn't inherit rotation or scale from parent bone.
+
+      :type: boolean
+
+   .. attribute:: inherit_scale
+
+      true when bone inherits scaling from parent bone.
+
+      :type: boolean
+
+   .. attribute:: bbone_segments
+
+      number of B-bone segments.
+
+      :type: integer
+
+   .. attribute:: roll
+
+      bone rotation around head-tail axis.
+
+      :type: float
+
+   .. attribute:: head
+
+      location of head end of the bone in parent bone space.
+
+      :type: vector [x, y, z]
+
+   .. attribute:: tail
+
+      location of head end of the bone in parent bone space.
+
+      :type: vector [x, y, z]
+
+   .. attribute:: length
+
+      bone length.
+
+      :type: float
+
+   .. attribute:: arm_head
+
+      location of head end of the bone in armature space.
+
+      :type: vector [x, y, z]
+
+   .. attribute:: arm_tail
+
+      location of tail end of the bone in armature space.
+
+      :type: vector [x, y, z]
+
+   .. attribute:: arm_mat
+
+      matrix of the bone head in armature space.
+
+      :type: matrix [4][4]
+
+      .. note::
+      
+         This matrix has no scale part. 
+
+   .. attribute:: bone_mat
+
+      rotation matrix of the bone in parent bone space.
+
+      :type: matrix [3][3]
+
+   .. attribute:: parent
+
+      parent bone, or None for root bone.
+
+      :type: :class:`BL_ArmatureBone`
+
+   .. attribute:: children
+
+      list of bone's children.
+
+      :type: list of :class:`BL_ArmatureBone`

doc/python_api/rst/bge_types/bge.types.BL_ArmatureChannel.rst

@@ -0,0 +1,278 @@
+BL_ArmatureChannel(PyObjectPlus)
+================================
+
+.. module:: bge.types
+
+base class --- :class:`PyObjectPlus`
+
+.. class:: BL_ArmatureChannel(PyObjectPlus)
+
+   Proxy to armature pose channel. Allows to read and set armature pose.
+   The attributes are identical to RNA attributes, but mostly in read-only mode.
+
+   .. attribute:: name
+
+      channel name (=bone name), read-only.
+
+      :type: string
+
+   .. attribute:: bone
+
+      return the bone object corresponding to this pose channel, read-only.
+
+      :type: :class:`BL_ArmatureBone`
+
+   .. attribute:: parent
+
+      return the parent channel object, None if root channel, read-only.
+
+      :type: :class:`BL_ArmatureChannel`
+
+   .. attribute:: has_ik
+
+      true if the bone is part of an active IK chain, read-only.
+      This flag is not set when an IK constraint is defined but not enabled (miss target information for example).
+
+      :type: boolean
+
+   .. attribute:: ik_dof_x
+
+      true if the bone is free to rotation in the X axis, read-only.
+
+      :type: boolean
+
+   .. attribute:: ik_dof_y
+
+      true if the bone is free to rotation in the Y axis, read-only.
+
+      :type: boolean
+
+   .. attribute:: ik_dof_z
+
+      true if the bone is free to rotation in the Z axis, read-only.
+
+      :type: boolean
+
+   .. attribute:: ik_limit_x
+
+      true if a limit is imposed on X rotation, read-only.
+
+      :type: boolean
+
+   .. attribute:: ik_limit_y
+
+      true if a limit is imposed on Y rotation, read-only.
+
+      :type: boolean
+
+   .. attribute:: ik_limit_z
+
+      true if a limit is imposed on Z rotation, read-only.
+
+      :type: boolean
+
+   .. attribute:: ik_rot_control
+
+      true if channel rotation should applied as IK constraint, read-only.
+
+      :type: boolean
+
+   .. attribute:: ik_lin_control
+
+      true if channel size should applied as IK constraint, read-only.
+
+      :type: boolean
+
+   .. attribute:: location
+
+      displacement of the bone head in armature local space, read-write.
+
+      :type: vector [X, Y, Z].
+
+      .. note::
+      
+         You can only move a bone if it is unconnected to its parent. An action playing on the armature may change the value. An IK chain does not update this value, see joint_rotation.
+
+      .. note::
+      
+         Changing this field has no immediate effect, the pose is updated when the armature is updated during the graphic render (see :data:`BL_ArmatureObject.update`).
+
+   .. attribute:: scale
+
+      scale of the bone relative to its parent, read-write.
+
+      :type: vector [sizeX, sizeY, sizeZ].
+
+      .. note::
+      
+         An action playing on the armature may change the value.  An IK chain does not update this value, see joint_rotation.
+
+      .. note::
+      
+         Changing this field has no immediate effect, the pose is updated when the armature is updated during the graphic render (see :data:`BL_ArmatureObject.update`)
+
+   .. attribute:: rotation_quaternion
+
+      rotation of the bone relative to its parent expressed as a quaternion, read-write.
+
+      :type: vector [qr, qi, qj, qk].
+
+      .. note::
+      
+         This field is only used if rotation_mode is 0. An action playing on the armature may change the value.  An IK chain does not update this value, see joint_rotation.
+
+      .. note::
+      
+         Changing this field has no immediate effect, the pose is updated when the armature is updated during the graphic render (see :data:`BL_ArmatureObject.update`)
+
+   .. attribute:: rotation_euler
+
+      rotation of the bone relative to its parent expressed as a set of euler angles, read-write.
+
+      :type: vector [X, Y, Z].
+
+      .. note::
+      
+         This field is only used if rotation_mode is > 0. You must always pass the angles in [X, Y, Z] order; the order of applying the angles to the bone depends on rotation_mode. An action playing on the armature may change this field.  An IK chain does not update this value, see joint_rotation.
+
+      .. note::
+      
+         Changing this field has no immediate effect, the pose is updated when the armature is updated during the graphic render (see :data:`BL_ArmatureObject.update`)
+
+   .. attribute:: rotation_mode
+
+      Method of updating the bone rotation, read-write.
+
+      :type: integer (one of :ref:`these constants <armaturechannel-constants-rotation-mode>`)
+
+   .. attribute:: channel_matrix
+
+      pose matrix in bone space (deformation of the bone due to action, constraint, etc), Read-only.
+      This field is updated after the graphic render, it represents the current pose.
+
+      :type: matrix [4][4]
+
+   .. attribute:: pose_matrix
+
+      pose matrix in armature space, read-only, 
+      This field is updated after the graphic render, it represents the current pose.
+
+      :type: matrix [4][4]
+
+   .. attribute:: pose_head
+
+      position of bone head in armature space, read-only.
+
+      :type: vector [x, y, z]
+
+   .. attribute:: pose_tail
+
+      position of bone tail in armature space, read-only.
+
+      :type: vector [x, y, z]
+
+   .. attribute:: ik_min_x
+
+      minimum value of X rotation in degree (<= 0) when X rotation is limited (see ik_limit_x), read-only.
+
+      :type: float
+
+   .. attribute:: ik_max_x
+
+      maximum value of X rotation in degree (>= 0) when X rotation is limited (see ik_limit_x), read-only.
+
+      :type: float
+
+   .. attribute:: ik_min_y
+
+      minimum value of Y rotation in degree (<= 0) when Y rotation is limited (see ik_limit_y), read-only.
+
+      :type: float
+
+   .. attribute:: ik_max_y
+
+      maximum value of Y rotation in degree (>= 0) when Y rotation is limited (see ik_limit_y), read-only.
+
+      :type: float
+
+   .. attribute:: ik_min_z
+
+      minimum value of Z rotation in degree (<= 0) when Z rotation is limited (see ik_limit_z), read-only.
+
+      :type: float
+
+   .. attribute:: ik_max_z
+
+      maximum value of Z rotation in degree (>= 0) when Z rotation is limited (see ik_limit_z), read-only.
+
+      :type: float
+
+   .. attribute:: ik_stiffness_x
+
+      bone rotation stiffness in X axis, read-only.
+
+      :type: float between 0 and 1
+
+   .. attribute:: ik_stiffness_y
+
+      bone rotation stiffness in Y axis, read-only.
+
+      :type: float between 0 and 1
+
+   .. attribute:: ik_stiffness_z
+
+      bone rotation stiffness in Z axis, read-only.
+
+      :type: float between 0 and 1
+
+   .. attribute:: ik_stretch
+
+      ratio of scale change that is allowed, 0=bone can't change size, read-only.
+
+      :type: float
+
+   .. attribute:: ik_rot_weight
+
+      weight of rotation constraint when ik_rot_control is set, read-write.
+
+      :type: float between 0 and 1
+
+   .. attribute:: ik_lin_weight
+
+      weight of size constraint when ik_lin_control is set, read-write.
+
+      :type: float between 0 and 1
+
+   .. attribute:: joint_rotation
+
+      Control bone rotation in term of joint angle (for robotic applications), read-write.
+
+      When writing to this attribute, you pass a [x, y, z] vector and an appropriate set of euler angles or quaternion is calculated according to the rotation_mode.
+
+      When you read this attribute, the current pose matrix is converted into a [x, y, z] vector representing the joint angles.
+
+      The value and the meaning of the x, y, z depends on the ik_dof_x/ik_dof_y/ik_dof_z attributes:
+
+      * 1DoF joint X, Y or Z: the corresponding x, y, or z value is used an a joint angle in radiant
+      * 2DoF joint X+Y or Z+Y: treated as 2 successive 1DoF joints: first X or Z, then Y. The x or z value is used as a joint angle in radiant along the X or Z axis, followed by a rotation along the new Y axis of y radiants.
+      * 2DoF joint X+Z: treated as a 2DoF joint with rotation axis on the X/Z plane. The x and z values are used as the coordinates of the rotation vector in the X/Z plane.
+      * 3DoF joint X+Y+Z: treated as a revolute joint. The [x, y, z] vector represents the equivalent rotation vector to bring the joint from the rest pose to the new pose.
+
+      :type: vector [x, y, z]
+      
+      .. note::
+      
+         The bone must be part of an IK chain if you want to set the ik_dof_x/ik_dof_y/ik_dof_z attributes via the UI, but this will interfere with this attribute since the IK solver will overwrite the pose. You can stay in control of the armature if you create an IK constraint but do not finalize it (e.g. don't set a target) the IK solver will not run but the IK panel will show up on the UI for each bone in the chain.
+
+      .. note::
+      
+         [0, 0, 0] always corresponds to the rest pose.
+
+      .. note::
+      
+         You must request the armature pose to update and wait for the next graphic frame to see the effect of setting this attribute (see :data:`BL_ArmatureObject.update`).
+
+      .. note::
+      
+         You can read the result of the calculation in rotation or euler_rotation attributes after setting this attribute.
+

doc/python_api/rst/bge_types/bge.types.BL_ArmatureConstraint.rst

@@ -0,0 +1,129 @@
+BL_ArmatureConstraint(PyObjectPlus)
+===================================
+
+.. module:: bge.types
+
+base class --- :class:`PyObjectPlus`
+
+.. class:: BL_ArmatureConstraint(PyObjectPlus)
+
+   Proxy to Armature Constraint. Allows to change constraint on the fly.
+   Obtained through :class:`BL_ArmatureObject`.constraints.
+
+   .. note::
+   
+      Not all armature constraints are supported in the GE.
+
+      
+   .. attribute:: type
+
+      Type of constraint, (read-only).
+
+      Use one of :ref:`these constants<armatureconstraint-constants-type>`.
+      
+      :type: integer, one of CONSTRAINT_TYPE_* constants
+
+   .. attribute:: name
+
+      Name of constraint constructed as <bone_name>:<constraint_name>. constraints list.
+
+      :type: string
+
+      This name is also the key subscript on :class:`BL_ArmatureObject`.
+
+   .. attribute:: enforce
+
+      fraction of constraint effect that is enforced. Between 0 and 1.
+
+      :type: float
+
+   .. attribute:: headtail
+
+      Position of target between head and tail of the target bone: 0=head, 1=tail.
+
+      :type: float.
+
+      .. note::
+      
+         Only used if the target is a bone (i.e target object is an armature.
+
+   .. attribute:: lin_error
+
+      runtime linear error (in Blender units) on constraint at the current frame.
+
+      This is a runtime value updated on each frame by the IK solver. Only available on IK constraint and iTaSC solver.
+
+      :type: float
+
+   .. attribute:: rot_error
+
+      Runtime rotation error (in radiant) on constraint at the current frame.
+
+      :type: float.
+
+      This is a runtime value updated on each frame by the IK solver. Only available on IK constraint and iTaSC solver.
+
+      It is only set if the constraint has a rotation part, for example, a CopyPose+Rotation IK constraint.
+
+   .. attribute:: target
+
+      Primary target object for the constraint. The position of this object in the GE will be used as target for the constraint.
+
+      :type: :class:`KX_GameObject`.
+
+   .. attribute:: subtarget
+
+      Secondary target object for the constraint. The position of this object in the GE will be used as secondary target for the constraint.
+
+      :type: :class:`KX_GameObject`.
+
+      Currently this is only used for pole target on IK constraint.
+
+   .. attribute:: active
+
+      True if the constraint is active.
+
+      :type: boolean
+      
+      .. note::
+      
+         An inactive constraint does not update lin_error and rot_error.
+
+   .. attribute:: ik_weight
+
+      Weight of the IK constraint between 0 and 1.
+
+      Only defined for IK constraint.
+
+      :type: float
+
+   .. attribute:: ik_type
+
+      Type of IK constraint, (read-only).
+
+      Use one of :ref:`these constants<armatureconstraint-constants-ik-type>`.
+      
+      :type: integer.
+
+   .. attribute:: ik_flag
+
+      Combination of IK constraint option flags, read-only.
+      
+      Use one of :ref:`these constants<armatureconstraint-constants-ik-flag>`.
+
+      :type: integer
+
+   .. attribute:: ik_dist
+
+      Distance the constraint is trying to maintain with target, only used when ik_type=CONSTRAINT_IK_DISTANCE.
+
+      :type: float
+
+   .. attribute:: ik_mode
+
+      Use one of :ref:`these constants<armatureconstraint-constants-ik-mode>`.
+      
+      Additional mode for IK constraint. Currently only used for Distance constraint:
+
+      :type: integer
+

doc/python_api/rst/bge_types/bge.types.BL_ArmatureObject.rst

@@ -0,0 +1,34 @@
+BL_ArmatureObject(KX_GameObject)
+================================
+
+.. module:: bge.types
+
+base class --- :class:`KX_GameObject`
+
+.. class:: BL_ArmatureObject(KX_GameObject)
+
+   An armature object.
+
+   .. attribute:: constraints
+
+      The list of armature constraint defined on this armature.
+      Elements of the list can be accessed by index or string.
+      The key format for string access is '<bone_name>:<constraint_name>'.
+
+      :type: list of :class:`BL_ArmatureConstraint`
+
+   .. attribute:: channels
+
+      The list of armature channels.
+      Elements of the list can be accessed by index or name the bone.
+
+      :type: list of :class:`BL_ArmatureChannel`
+
+   .. method:: update()
+
+      Ensures that the armature will be updated on next graphic frame.
+
+      This action is unecessary if a KX_ArmatureActuator with mode run is active
+      or if an action is playing. Use this function in other cases. It must be called
+      on each frame to ensure that the armature is updated continously.
+

doc/python_api/rst/bge_types/bge.types.BL_Shader.rst

@@ -0,0 +1,230 @@
+BL_Shader(PyObjectPlus)
+=======================
+
+.. module:: bge.types
+
+base class --- :class:`PyObjectPlus`
+
+.. class:: BL_Shader(PyObjectPlus)
+
+   BL_Shader GLSL shaders.
+
+   TODO - Description
+
+   .. method:: setUniformfv(name, fList)
+
+      Set a uniform with a list of float values
+
+      :arg name: the uniform name
+      :type name: string
+      :arg fList: a list (2, 3 or 4 elements) of float values
+      :type fList: list[float]
+
+   .. method:: delSource()
+
+      Clear the shader. Use this method before the source is changed with :data:`setSource`.
+
+   .. method:: getFragmentProg()
+
+      Returns the fragment program.
+
+      :return: The fragment program.
+      :rtype: string
+
+   .. method:: getVertexProg()
+
+      Get the vertex program.
+
+      :return: The vertex program.
+      :rtype: string
+
+   .. method:: isValid()
+
+      Check if the shader is valid.
+
+      :return: True if the shader is valid
+      :rtype: boolean
+
+   .. method:: setAttrib(enum)
+
+      Set attribute location. (The parameter is ignored a.t.m. and the value of "tangent" is always used.)
+
+      :arg enum: attribute location value
+      :type enum: integer
+
+   .. method:: setNumberOfPasses( max_pass )
+
+      Set the maximum number of passes. Not used a.t.m.
+
+      :arg max_pass: the maximum number of passes
+      :type max_pass: integer
+
+   .. method:: setSampler(name, index)
+
+      Set uniform texture sample index.
+
+      :arg name: Uniform name
+      :type name: string
+      :arg index: Texture sample index.
+      :type index: integer
+
+   .. method:: setSource(vertexProgram, fragmentProgram)
+
+      Set the vertex and fragment programs
+
+      :arg vertexProgram: Vertex program
+      :type vertexProgram: string
+      :arg fragmentProgram: Fragment program
+      :type fragmentProgram: string
+
+   .. method:: setUniform1f(name, fx)
+
+      Set a uniform with 1 float value.
+
+      :arg name: the uniform name
+      :type name: string
+      :arg fx: Uniform value
+      :type fx: float
+
+   .. method:: setUniform1i(name, ix)
+
+      Set a uniform with an integer value.
+
+      :arg name: the uniform name
+      :type name: string
+      :arg ix: the uniform value
+      :type ix: integer
+
+   .. method:: setUniform2f(name, fx, fy)
+
+      Set a uniform with 2 float values
+
+      :arg name: the uniform name
+      :type name: string
+      :arg fx: first float value
+      :type fx: float
+
+      :arg fy: second float value
+      :type fy: float
+
+   .. method:: setUniform2i(name, ix, iy)
+
+      Set a uniform with 2 integer values
+
+      :arg name: the uniform name
+      :type name: string
+      :arg ix: first integer value
+      :type ix: integer
+      :arg iy: second integer value
+      :type iy: integer
+
+   .. method:: setUniform3f(name, fx, fy, fz)
+
+      Set a uniform with 3 float values.
+
+      :arg name: the uniform name
+      :type name: string
+      :arg fx: first float value
+      :type fx: float
+      :arg fy: second float value
+      :type fy: float
+      :arg fz: third float value
+      :type fz: float
+
+   .. method:: setUniform3i(name, ix, iy, iz)
+
+      Set a uniform with 3 integer values
+
+      :arg name: the uniform name
+      :type name: string
+      :arg ix: first integer value
+      :type ix: integer
+      :arg iy: second integer value
+      :type iy: integer
+      :arg iz: third integer value
+      :type iz: integer
+
+   .. method:: setUniform4f(name, fx, fy, fz, fw)
+
+      Set a uniform with 4 float values.
+
+      :arg name: the uniform name
+      :type name: string
+      :arg fx: first float value
+      :type fx: float
+      :arg fy: second float value
+      :type fy: float
+      :arg fz: third float value
+      :type fz: float
+      :arg fw: fourth float value
+      :type fw: float
+
+   .. method:: setUniform4i(name, ix, iy, iz, iw)
+
+      Set a uniform with 4 integer values
+
+      :arg name: the uniform name
+      :type name: string
+      :arg ix: first integer value
+      :type ix: integer
+      :arg iy: second integer value
+      :type iy: integer
+      :arg iz: third integer value
+      :type iz: integer
+      :arg iw: fourth integer value
+      :type iw: integer
+
+   .. method:: setUniformDef(name, type)
+
+      Define a new uniform
+
+      :arg name: the uniform name
+      :type name: string
+      :arg type: uniform type
+      :type type: UNI_NONE, UNI_INT, UNI_FLOAT, UNI_INT2, UNI_FLOAT2, UNI_INT3, UNI_FLOAT3, UNI_INT4, UNI_FLOAT4, UNI_MAT3, UNI_MAT4, UNI_MAX
+
+   .. method:: setUniformMatrix3(name, mat, transpose)
+
+      Set a uniform with a 3x3 matrix value
+
+      :arg name: the uniform name
+      :type name: string
+      :arg mat: A 3x3 matrix [[f, f, f], [f, f, f], [f, f, f]]
+      :type mat: 3x3 matrix
+      :arg transpose: set to True to transpose the matrix
+      :type transpose: boolean
+
+   .. method:: setUniformMatrix4(name, mat, transpose)
+
+      Set a uniform with a 4x4 matrix value
+
+      :arg name: the uniform name
+      :type name: string
+      :arg mat: A 4x4 matrix [[f, f, f, f], [f, f, f, f], [f, f, f, f], [f, f, f, f]]
+      :type mat: 4x4 matrix
+      :arg transpose: set to True to transpose the matrix
+      :type transpose: boolean
+
+   .. method:: setUniformiv(name, iList)
+
+      Set a uniform with a list of integer values
+
+      :arg name: the uniform name
+      :type name: string
+      :arg iList: a list (2, 3 or 4 elements) of integer values
+      :type iList: list[integer]
+
+   .. method:: setUniformEyef(name)
+
+      Set a uniform with a float value that reflects the eye being render in stereo mode: 
+      0.0 for the left eye, 0.5 for the right eye. In non stereo mode, the value of the uniform
+      is fixed to 0.0. The typical use of this uniform is in stereo mode to sample stereo textures
+      containing the left and right eye images in a top-bottom order. 
+
+      :arg name: the uniform name
+      :type name: string
+
+   .. method:: validate()
+
+      Validate the shader object.
+

doc/python_api/rst/bge_types/bge.types.BL_ShapeActionActuator.rst

@@ -0,0 +1,70 @@
+BL_ShapeActionActuator(SCA_IActuator)
+=====================================
+
+.. module:: bge.types
+
+base class --- :class:`SCA_IActuator`
+
+.. class:: BL_ShapeActionActuator(SCA_IActuator)
+
+   ShapeAction Actuators apply an shape action to an mesh object.
+
+   .. attribute:: action
+
+      The name of the action to set as the current shape action.
+
+      :type: string
+
+   .. attribute:: frameStart
+
+      Specifies the starting frame of the shape animation.
+
+      :type: float
+
+   .. attribute:: frameEnd
+
+      Specifies the ending frame of the shape animation.
+
+      :type: float
+
+   .. attribute:: blendIn
+
+      Specifies the number of frames of animation to generate when making transitions between actions.
+
+      :type: float
+
+   .. attribute:: priority
+
+      Sets the priority of this actuator. Actuators will lower priority numbers will override actuators with higher numbers.
+
+      :type: integer
+
+   .. attribute:: frame
+
+      Sets the current frame for the animation.
+
+      :type: float
+
+   .. attribute:: propName
+
+      Sets the property to be used in FromProp playback mode.
+
+      :type: string
+
+   .. attribute:: blendTime
+
+      Sets the internal frame timer. This property must be in the range from 0.0 to blendin.
+
+      :type: float
+
+   .. attribute:: mode
+
+      The operation mode of the actuator. Can be one of :ref:`these constants<action-actuator>`.
+
+      :type: integer
+
+   .. attribute:: framePropName
+
+      The name of the property that is set to the current frame number.
+
+      :type: string

doc/python_api/rst/bge_types/bge.types.CListValue.rst

@@ -0,0 +1,72 @@
+CListValue(CPropValue)
+======================
+
+.. module:: bge.types
+
+base class --- :class:`CPropValue`
+
+.. class:: CListValue(CPropValue)
+
+   This is a list like object used in the game engine internally that behaves similar to a python list in most ways.
+
+   As well as the normal index lookup (``val= clist[i]``), CListValue supports string lookups (``val= scene.objects["Cube"]``)
+
+   Other operations such as ``len(clist)``, ``list(clist)``, ``clist[0:10]`` are also supported.
+
+   .. method:: append(val)
+
+      Add an item to the list (like pythons append)
+
+      .. warning::
+      
+         Appending values to the list can cause crashes when the list is used internally by the game engine.
+
+   .. method:: count(val)
+
+      Count the number of instances of a value in the list.
+
+      :return: number of instances
+      :rtype: integer
+
+   .. method:: index(val)
+
+      Return the index of a value in the list.
+
+      :return: The index of the value in the list.
+      :rtype: integer
+
+   .. method:: reverse()
+
+      Reverse the order of the list.
+
+   .. method:: get(key, default=None)
+
+      Return the value matching key, or the default value if its not found.
+
+      :return: The key value or a default.
+
+   .. method:: from_id(id)
+
+      This is a funtion especially for the game engine to return a value with a spesific id.
+
+      Since object names are not always unique, the id of an object can be used to get an object from the CValueList.
+
+      Example:
+
+      .. code-block:: python
+        
+         myObID=id(gameObject)
+         ob= scene.objects.from_id(myObID)
+
+      Where ``myObID`` is an int or long from the id function.
+
+      This has the advantage that you can store the id in places you could not store a gameObject.
+
+      .. warning::
+
+         The id is derived from a memory location and will be different each time the game engine starts.
+
+      .. warning::
+
+         The id can't be stored as an integer in game object properties, as those only have a limited range that the id may not be contained in. Instead an id can be stored as a string game property and converted back to an integer for use in from_id lookups.
+

doc/python_api/rst/bge_types/bge.types.CPropValue.rst

@@ -0,0 +1,11 @@
+CPropValue(CValue)
+==================
+
+.. module:: bge.types
+
+base class --- :class:`CValue`
+
+.. class:: CPropValue(CValue)
+
+   This class has no python functions
+

doc/python_api/rst/bge_types/bge.types.CValue.rst

@@ -0,0 +1,17 @@
+CValue(PyObjectPlus)
+====================
+
+.. module:: bge.types
+
+base class --- :class:`PyObjectPlus`
+
+.. class:: CValue(PyObjectPlus)
+
+   This class is a basis for other classes.
+
+   .. attribute:: name
+
+      The name of this CValue derived object (read-only).
+
+      :type: string
+      

doc/python_api/rst/bge_types/bge.types.KX_ArmatureSensor.rst

@@ -0,0 +1,36 @@
+KX_ArmatureSensor(SCA_ISensor)
+==============================
+
+.. module:: bge.types
+
+base class --- :class:`SCA_ISensor`
+
+.. class:: KX_ArmatureSensor(SCA_ISensor)
+
+   Armature sensor detect conditions on armatures.
+
+   .. attribute:: type
+
+      The type of measurement that the sensor make when it is active.
+      
+      Can be one of :ref:`these constants <armaturesensor-type>`
+
+      :type: integer.
+
+   .. attribute:: constraint
+
+      The constraint object this sensor is watching.
+
+      :type: :class:`BL_ArmatureConstraint`
+
+   .. attribute:: value
+   
+      The threshold used in the comparison with the constraint error
+      The linear error is only updated on CopyPose/Distance IK constraint with iTaSC solver
+      The rotation error is only updated on CopyPose+rotation IK constraint with iTaSC solver
+      The linear error on CopyPose is always >= 0: it is the norm of the distance between the target and the bone
+      The rotation error on CopyPose is always >= 0: it is the norm of the equivalent rotation vector between the bone and the target orientations
+      The linear error on Distance can be positive if the distance between the bone and the target is greater than the desired distance, and negative if the distance is smaller.
+
+      :type: float
+      

doc/python_api/rst/bge_types/bge.types.KX_BlenderMaterial.rst

@@ -0,0 +1,185 @@
+KX_BlenderMaterial(PyObjectPlus)
+================================
+
+.. module:: bge.types
+
+base class --- :class:`PyObjectPlus`
+
+.. class:: KX_BlenderMaterial(PyObjectPlus)
+
+   This is the interface to materials in the game engine.
+
+   Materials define the render state to be applied to mesh objects.
+   
+   The example below shows a simple GLSL shader setup allowing to dynamically mix two texture channels
+   in a material. All materials of the object executing this script should have two textures using
+   separate UV maps in the two first texture channels.
+   
+   The code works for both Multitexture and GLSL rendering modes.
+
+   .. code-block:: python
+
+      from bge import logic
+      
+      vertex_shader = """
+      
+      void main(void)
+      {
+         // simple projection of the vertex position to view space
+         gl_Position = gl_ModelViewProjectionMatrix * gl_Vertex;
+         // coordinate of the 1st texture channel
+         gl_TexCoord[0] = gl_MultiTexCoord0;
+         // coordinate of the 2nd texture channel
+         gl_TexCoord[1] = gl_MultiTexCoord1;
+      }
+      """
+      
+      fragment_shader ="""
+
+      uniform sampler2D texture_0;
+      uniform sampler2D texture_1;
+      uniform float factor;
+
+      void main(void)
+      {
+         vec4 color_0 = texture2D(texture_0, gl_TexCoord[0].st);
+         vec4 color_1 = texture2D(texture_1, gl_TexCoord[1].st);
+         gl_FragColor = mix(color_0, color_1, factor);
+      }
+      """
+
+      object = logic.getCurrentController().owner
+      
+      for mesh in object.meshes:
+          for material in mesh.materials:
+              shader = material.getShader()
+              if shader is not None:
+                  if not shader.isValid():
+                      shader.setSource(vertex_shader, fragment_shader, True)
+
+                  # get the first texture channel of the material
+                  shader.setSampler('texture_0', 0)
+                  # get the second texture channel of the material
+                  shader.setSampler('texture_1', 1)
+                  # pass another uniform to the shader
+                  shader.setUniform1f('factor', 0.3)
+
+   .. attribute:: shader
+
+      The material's shader.
+
+      :type: :class:`BL_Shader`
+
+   .. attribute:: blending
+
+      Ints used for pixel blending, (src, dst), matching the setBlending method.
+
+      :type: (integer, integer)
+
+   .. attribute:: material_index
+
+      The material's index.
+
+      :type: integer
+
+   .. method:: getShader()
+
+      Returns the material's shader.
+
+      :return: the material's shader
+      :rtype: :class:`BL_Shader`
+
+   .. method:: getTextureBindcode(textureslot)
+
+      Returns the material's texture OpenGL bind code/id/number/name.
+
+      :arg textureslot: Specifies the texture slot number
+      :type textureslot: integer
+      :return: the material's texture OpenGL bind code/id/number/name
+      :rtype: integer
+
+   .. attribute:: alpha
+
+      The material's alpha transparency.
+
+      :type: float between 0.0 and 1.0 inclusive
+
+   .. attribute:: hardness
+
+      How hard (sharp) the material's specular reflection is.
+
+      :type: integer between 1 and 511 inclusive
+
+   .. attribute:: emit
+
+      Amount of light to emit.
+
+      :type: float between 0.0 and 2.0 inclusive
+
+   .. attribute:: specularIntensity
+
+      How intense (bright) the material's specular reflection is.
+
+      :type: float between 0.0 and 1.0 inclusive
+
+   .. attribute:: diffuseIntensity
+
+      The material's amount of diffuse reflection.
+
+      :type: float between 0.0 and 1.0 inclusive
+
+   .. attribute:: specularColor
+
+      The material's specular color.
+
+      :type: :class:`mathutils.Color`
+
+   .. attribute:: diffuseColor
+
+      The material's diffuse color.
+
+      :type: :class:`mathutils.Color`
+
+   .. method:: setBlending(src, dest)
+
+      Set the pixel color arithmetic functions.
+
+      :arg src: Specifies how the red, green, blue, and alpha source blending factors are computed, one of...
+      
+         * :data:`~bgl.GL_ZERO`
+         * :data:`~bgl.GL_ONE`
+         * :data:`~bgl.GL_SRC_COLOR`
+         * :data:`~bgl.GL_ONE_MINUS_SRC_COLOR`
+         * :data:`~bgl.GL_DST_COLOR`
+         * :data:`~bgl.GL_ONE_MINUS_DST_COLOR`
+         * :data:`~bgl.GL_SRC_ALPHA`
+         * :data:`~bgl.GL_ONE_MINUS_SRC_ALPHA`
+         * :data:`~bgl.GL_DST_ALPHA`
+         * :data:`~bgl.GL_ONE_MINUS_DST_ALPHA`
+         * :data:`~bgl.GL_SRC_ALPHA_SATURATE`
+      
+      :type src: int
+
+      :arg dest: Specifies how the red, green, blue, and alpha destination blending factors are computed, one of...
+      
+         * :data:`~bgl.GL_ZERO`
+         * :data:`~bgl.GL_ONE`
+         * :data:`~bgl.GL_SRC_COLOR`
+         * :data:`~bgl.GL_ONE_MINUS_SRC_COLOR`
+         * :data:`~bgl.GL_DST_COLOR`
+         * :data:`~bgl.GL_ONE_MINUS_DST_COLOR`
+         * :data:`~bgl.GL_SRC_ALPHA`
+         * :data:`~bgl.GL_ONE_MINUS_SRC_ALPHA`
+         * :data:`~bgl.GL_DST_ALPHA`
+         * :data:`~bgl.GL_ONE_MINUS_DST_ALPHA`
+         * :data:`~bgl.GL_SRC_ALPHA_SATURATE`
+      
+      :type dest: int
+
+   .. method:: getMaterialIndex()
+
+      Returns the material's index.
+
+      :return: the material's index
+      :rtype: integer
+

doc/python_api/rst/bge_types/bge.types.KX_Camera.rst

@@ -0,0 +1,302 @@
+KX_Camera(KX_GameObject)
+========================
+
+.. module:: bge.types
+
+base class --- :class:`KX_GameObject`
+
+.. class:: KX_Camera(KX_GameObject)
+
+   A Camera object.
+
+   .. data:: INSIDE
+
+      See :data:`sphereInsideFrustum` and :data:`boxInsideFrustum`
+
+   .. data:: INTERSECT
+
+      See :data:`sphereInsideFrustum` and :data:`boxInsideFrustum`
+
+   .. data:: OUTSIDE
+
+      See :data:`sphereInsideFrustum` and :data:`boxInsideFrustum`
+
+   .. attribute:: lens
+
+      The camera's lens value.
+
+      :type: float
+
+   .. attribute:: fov
+
+      The camera's field of view value.
+
+      :type: float
+
+   .. attribute:: ortho_scale
+
+      The camera's view scale when in orthographic mode.
+
+      :type: float
+
+   .. attribute:: near
+
+      The camera's near clip distance.
+
+      :type: float
+
+   .. attribute:: far
+
+      The camera's far clip distance.
+
+      :type: float
+
+   .. attribute:: shift_x
+
+      The camera's horizontal shift.
+
+      :type: float
+
+   .. attribute:: shift_y
+
+      The camera's vertical shift.
+
+      :type: float
+
+   .. attribute:: perspective
+
+      True if this camera has a perspective transform, False for an orthographic projection.
+
+      :type: boolean
+
+   .. attribute:: frustum_culling
+
+      True if this camera is frustum culling.
+
+      :type: boolean
+
+   .. attribute:: projection_matrix
+
+      This camera's 4x4 projection matrix.
+
+      .. note::
+      
+         This is the identity matrix prior to rendering the first frame (any Python done on frame 1). 
+
+      :type: 4x4 Matrix [[float]]
+
+   .. attribute:: modelview_matrix
+
+      This camera's 4x4 model view matrix. (read-only).
+
+      :type: 4x4 Matrix [[float]]
+
+      .. note::
+      
+         This matrix is regenerated every frame from the camera's position and orientation. Also, this is the identity matrix prior to rendering the first frame (any Python done on frame 1).
+
+   .. attribute:: camera_to_world
+
+      This camera's camera to world transform. (read-only).
+
+      :type: 4x4 Matrix [[float]]
+
+      .. note::
+      
+         This matrix is regenerated every frame from the camera's position and orientation.
+
+   .. attribute:: world_to_camera
+
+      This camera's world to camera transform. (read-only).
+
+      :type: 4x4 Matrix [[float]]
+
+      .. note::
+         
+         Regenerated every frame from the camera's position and orientation.
+
+      .. note::
+      
+         This is camera_to_world inverted.
+
+   .. attribute:: useViewport
+
+      True when the camera is used as a viewport, set True to enable a viewport for this camera.
+
+      :type: boolean
+
+   .. method:: sphereInsideFrustum(centre, radius)
+
+      Tests the given sphere against the view frustum.
+
+      :arg centre: The centre of the sphere (in world coordinates.)
+      :type centre: list [x, y, z]
+      :arg radius: the radius of the sphere
+      :type radius: float
+      :return: :data:`~bge.types.KX_Camera.INSIDE`, :data:`~bge.types.KX_Camera.OUTSIDE` or :data:`~bge.types.KX_Camera.INTERSECT`
+      :rtype: integer
+
+      .. note::
+
+         When the camera is first initialized the result will be invalid because the projection matrix has not been set.
+
+      .. code-block:: python
+
+         from bge import logic
+         cont = logic.getCurrentController()
+         cam = cont.owner
+         
+         # A sphere of radius 4.0 located at [x, y, z] = [1.0, 1.0, 1.0]
+         if (cam.sphereInsideFrustum([1.0, 1.0, 1.0], 4) != cam.OUTSIDE):
+             # Sphere is inside frustum !
+             # Do something useful !
+         else:
+             # Sphere is outside frustum
+
+   .. method:: boxInsideFrustum(box)
+
+      Tests the given box against the view frustum.
+
+      :arg box: Eight (8) corner points of the box (in world coordinates.)
+      :type box: list of lists
+      :return: :data:`~bge.types.KX_Camera.INSIDE`, :data:`~bge.types.KX_Camera.OUTSIDE` or :data:`~bge.types.KX_Camera.INTERSECT`
+
+      .. note::
+      
+         When the camera is first initialized the result will be invalid because the projection matrix has not been set.
+
+      .. code-block:: python
+
+         from bge import logic
+         cont = logic.getCurrentController()
+         cam = cont.owner
+
+         # Box to test...
+         box = []
+         box.append([-1.0, -1.0, -1.0])
+         box.append([-1.0, -1.0,  1.0])
+         box.append([-1.0,  1.0, -1.0])
+         box.append([-1.0,  1.0,  1.0])
+         box.append([ 1.0, -1.0, -1.0])
+         box.append([ 1.0, -1.0,  1.0])
+         box.append([ 1.0,  1.0, -1.0])
+         box.append([ 1.0,  1.0,  1.0])
+         
+         if (cam.boxInsideFrustum(box) != cam.OUTSIDE):
+           # Box is inside/intersects frustum !
+           # Do something useful !
+         else:
+           # Box is outside the frustum !
+           
+   .. method:: pointInsideFrustum(point)
+
+      Tests the given point against the view frustum.
+
+      :arg point: The point to test (in world coordinates.)
+      :type point: 3D Vector
+      :return: True if the given point is inside this camera's viewing frustum.
+      :rtype: boolean
+
+      .. note::
+      
+         When the camera is first initialized the result will be invalid because the projection matrix has not been set.
+
+      .. code-block:: python
+
+         from bge import logic
+         cont = logic.getCurrentController()
+         cam = cont.owner
+
+         # Test point [0.0, 0.0, 0.0]
+         if (cam.pointInsideFrustum([0.0, 0.0, 0.0])):
+           # Point is inside frustum !
+           # Do something useful !
+         else:
+           # Box is outside the frustum !
+
+   .. method:: getCameraToWorld()
+
+      Returns the camera-to-world transform.
+
+      :return: the camera-to-world transform matrix.
+      :rtype: matrix (4x4 list)
+
+   .. method:: getWorldToCamera()
+
+      Returns the world-to-camera transform.
+
+      This returns the inverse matrix of getCameraToWorld().
+
+      :return: the world-to-camera transform matrix.
+      :rtype: matrix (4x4 list)
+
+   .. method:: setOnTop()
+
+      Set this cameras viewport ontop of all other viewport.
+
+   .. method:: setViewport(left, bottom, right, top)
+
+      Sets the region of this viewport on the screen in pixels.
+
+      Use :data:`bge.render.getWindowHeight` and :data:`bge.render.getWindowWidth` to calculate values relative to the entire display.
+
+      :arg left: left pixel coordinate of this viewport
+      :type left: integer
+      :arg bottom: bottom pixel coordinate of this viewport
+      :type bottom: integer
+      :arg right: right pixel coordinate of this viewport
+      :type right: integer
+      :arg top: top pixel coordinate of this viewport
+      :type top: integer
+
+   .. method:: getScreenPosition(object)
+
+      Gets the position of an object projected on screen space.
+
+      .. code-block:: python
+
+         # For an object in the middle of the screen, coord = [0.5, 0.5]
+         coord = camera.getScreenPosition(object)
+
+      :arg object: object name or list [x, y, z]
+      :type object: :class:`KX_GameObject` or 3D Vector
+      :return: the object's position in screen coordinates.
+      :rtype: list [x, y]
+
+   .. method:: getScreenVect(x, y)
+
+      Gets the vector from the camera position in the screen coordinate direction.
+
+      :arg x: X Axis
+      :type x: float
+      :arg y: Y Axis
+      :type y: float
+      :rtype: 3D Vector
+      :return: The vector from screen coordinate.
+
+      .. code-block:: python
+
+         # Gets the vector of the camera front direction:
+         m_vect = camera.getScreenVect(0.5, 0.5)
+
+   .. method:: getScreenRay(x, y, dist=inf, property=None)
+
+      Look towards a screen coordinate (x, y) and find first object hit within dist that matches prop.
+      The ray is similar to KX_GameObject->rayCastTo.
+
+      :arg x: X Axis
+      :type x: float
+      :arg y: Y Axis
+      :type y: float
+      :arg dist: max distance to look (can be negative => look behind); 0 or omitted => detect up to other
+      :type dist: float
+      :arg property: property name that object must have; can be omitted => detect any object
+      :type property: string
+      :rtype: :class:`KX_GameObject`
+      :return: the first object hit or None if no object or object does not match prop
+
+      .. code-block:: python
+
+         # Gets an object with a property "wall" in front of the camera within a distance of 100:
+         target = camera.getScreenRay(0.5, 0.5, 100, "wall")
+         

doc/python_api/rst/bge_types/bge.types.KX_CameraActuator.rst

@@ -0,0 +1,47 @@
+KX_CameraActuator(SCA_IActuator)
+================================
+
+.. module:: bge.types
+
+base class --- :class:`SCA_IActuator`
+
+.. class:: KX_CameraActuator(SCA_IActuator)
+
+   Applies changes to a camera.
+
+   .. attribute:: damping
+
+      strength of of the camera following movement.
+
+      :type: float
+
+   .. attribute:: axis
+
+      The camera axis (0, 1, 2) for positive ``XYZ``, (3, 4, 5) for negative ``XYZ``.
+
+      :type: int
+
+   .. attribute:: min
+
+      minimum distance to the target object maintained by the actuator.
+
+      :type: float
+
+   .. attribute:: max
+
+      maximum distance to stay from the target object.
+
+      :type: float
+
+   .. attribute:: height
+
+      height to stay above the target object.
+
+      :type: float
+
+   .. attribute:: object
+
+      the object this actuator tracks.
+
+      :type: :class:`KX_GameObject` or None
+

doc/python_api/rst/bge_types/bge.types.KX_CharacterWrapper.rst

@@ -0,0 +1,45 @@
+KX_CharacterWrapper(PyObjectPlus)
+=================================
+
+.. module:: bge.types
+
+base class --- :class:`PyObjectPlus`
+
+.. class:: KX_CharacterWrapper(PyObjectPlus)
+
+   A wrapper to expose character physics options.
+
+   .. attribute:: onGround
+
+      Whether or not the character is on the ground. (read-only)
+
+      :type: boolean
+
+   .. attribute:: gravity
+
+      The gravity value used for the character.
+
+      :type: float
+
+   .. attribute:: maxJumps
+
+      The maximum number of jumps a character can perform before having to touch the ground. By default this is set to 1. 2 allows for a double jump, etc.
+
+      :type: int in [0, 255], default 1
+
+   .. attribute:: jumpCount
+
+      The current jump count. This can be used to have different logic for a single jump versus a double jump. For example, a different animation for the second jump.
+
+      :type: int
+
+   .. attribute:: walkDirection
+
+      The speed and direction the character is traveling in using world coordinates. This should be used instead of applyMovement() to properly move the character.
+
+      :type: Vector((x, y, z))
+
+   .. method:: jump()
+
+      The character jumps based on it's jump speed.
+

doc/python_api/rst/bge_types/bge.types.KX_ConstraintActuator.rst

@@ -0,0 +1,78 @@
+KX_ConstraintActuator(SCA_IActuator)
+====================================
+
+.. module:: bge.types
+
+base class --- :class:`SCA_IActuator`
+
+.. class:: KX_ConstraintActuator(SCA_IActuator)
+
+   A constraint actuator limits the position, rotation, distance or orientation of an object.
+
+   .. attribute:: damp
+
+      Time constant of the constraint expressed in frame (not use by Force field constraint).
+
+      :type: integer
+
+   .. attribute:: rotDamp
+
+      Time constant for the rotation expressed in frame (only for the distance constraint), 0 = use damp for rotation as well.
+
+      :type: integer
+
+   .. attribute:: direction
+
+      The reference direction in world coordinate for the orientation constraint.
+
+      :type: 3-tuple of float: (x, y, z)
+
+   .. attribute:: option
+
+      Binary combination of :ref:`these constants <constraint-actuator-option>`
+
+      :type: integer
+
+   .. attribute:: time
+
+      activation time of the actuator. The actuator disables itself after this many frame. If set to 0, the actuator is not limited in time.
+
+      :type: integer
+
+   .. attribute:: propName
+
+      the name of the property or material for the ray detection of the distance constraint.
+
+      :type: string
+
+   .. attribute:: min
+
+      The lower bound of the constraint. For the rotation and orientation constraint, it represents radiant.
+
+      :type: float
+
+   .. attribute:: distance
+
+      the target distance of the distance constraint.
+
+      :type: float
+
+   .. attribute:: max
+
+      the upper bound of the constraint. For rotation and orientation constraints, it represents radiant.
+
+      :type: float
+
+   .. attribute:: rayLength
+
+      the length of the ray of the distance constraint.
+
+      :type: float
+
+   .. attribute:: limit
+
+      type of constraint. Use one of the :ref:`these constants <constraint-actuator-limit>`
+
+      :type: integer.
+
+      

doc/python_api/rst/bge_types/bge.types.KX_ConstraintWrapper.rst

@@ -0,0 +1,143 @@
+KX_ConstraintWrapper(PyObjectPlus)
+==================================
+
+.. module:: bge.types
+
+base class --- :class:`PyObjectPlus`
+
+.. class:: KX_ConstraintWrapper(PyObjectPlus)
+
+   KX_ConstraintWrapper
+
+   .. method:: getConstraintId(val)
+
+      Returns the contraint ID
+
+      :return: the constraint ID
+      :rtype: integer
+
+   .. method:: setParam(axis, value0, value1)
+
+      Set the contraint limits
+
+      :arg axis:
+      :type axis: integer
+
+      .. note::
+         * Lowerlimit == Upperlimit -> axis is locked
+         * Lowerlimit > Upperlimit -> axis is free
+         * Lowerlimit < Upperlimit -> axis it limited in that range
+
+      For PHY_LINEHINGE_CONSTRAINT = 2 or PHY_ANGULAR_CONSTRAINT = 3:
+
+      axis = 3 is a constraint limit, with low/high limit value
+         * 3: X axis angle
+
+      :arg value0 (min): Set the minimum limit of the axis
+      :type value0: float
+      :arg value1 (max): Set the maximum limit of the axis
+      :type value1: float
+
+      For PHY_CONE_TWIST_CONSTRAINT = 4:
+
+      axis = 3..5 are constraint limits, high limit values
+         * 3: X axis angle
+         * 4: Y axis angle
+         * 5: Z axis angle
+
+      :arg value0 (min): Set the minimum limit of the axis
+      :type value0: float
+      :arg value1 (max): Set the maximum limit of the axis
+      :type value1: float
+
+      For PHY_GENERIC_6DOF_CONSTRAINT = 12:
+
+      axis = 0..2 are constraint limits, with low/high limit value
+         * 0: X axis position
+         * 1: Y axis position
+         * 2: Z axis position
+
+      axis = 3..5 are relative constraint (Euler) angles in radians
+         * 3: X axis angle
+         * 4: Y axis angle
+         * 5: Z axis angle
+
+      :arg value0 (min): Set the minimum limit of the axis
+      :type value0: float
+      :arg value1 (max): Set the maximum limit of the axis
+      :type value1: float
+
+      axis = 6..8 are translational motors, with value0=target velocity, value1 = max motor force
+         * 6: X axis position
+         * 7: Y axis position
+         * 8: Z axis position
+
+      axis = 9..11 are rotational motors, with value0=target velocity, value1 = max motor force
+         * 9: X axis angle
+         * 10: Y axis angle
+         * 11: Z axis angle
+
+      :arg value0 (speed): Set the linear velocity of the axis
+      :type value0: float Range: -10,000.00 to 10,000.00
+      :arg value1 (force): Set the maximum force limit of the axis
+      :type value1: float Range: -10,000.00 to 10,000.00
+
+      axis = 12..14 are for linear springs on each of the position of freedom
+         * 12: X axis position
+         * 13: Y axis position
+         * 14: Z axis position
+
+      axis = 15..17 are for angular springs on each of the angle of freedom in radians
+         * 15: X axis angle
+         * 16: Y axis angle
+         * 17: Z axis angle
+
+      :arg value0 (stiffness): Set the stiffness of the spring
+      :type value0: float
+      :arg value1 (damping): Tendency of the spring to return to it's original position
+      :type value1: float
+                    1.0 = springs back to original position (no damping)
+                    0.0 = don't springs back
+
+   .. method:: getParam(axis)
+
+      Get the contraint position or euler angle of a generic 6DOF constraint
+
+      :arg axis:
+      :type axis: integer
+
+      axis = 0..2 are linear constraint values
+         * 0: X axis position
+         * 1: Y axis position
+         * 2: Z axis position
+
+      :return: position
+      :rtype: float
+
+      axis = 3..5 are relative constraint (Euler) angles in radians 
+         * 3: X axis angle
+         * 4: Y axis angle
+         * 5: Z axis angle
+
+      :return: angle
+      :rtype: float
+
+   .. attribute:: constraint_id
+
+      Returns the contraint ID  (read only)
+
+      :type: integer
+
+   .. attribute:: constraint_type
+
+      Returns the contraint type (read only)
+
+      :type: integer
+
+         - :class:`~bge.constraints.POINTTOPOINT_CONSTRAINT`
+         - :class:`~bge.constraints.LINEHINGE_CONSTRAINT`
+         - :class:`~bge.constraints.ANGULAR_CONSTRAINT`
+         - :class:`~bge.constraints.CONETWIST_CONSTRAINT`
+         - :class:`~bge.constraints.VEHICLE_CONSTRAINT`
+         - :class:`~bge.constraints.GENERIC_6DOF_CONSTRAINT`
+

doc/python_api/rst/bge_types/bge.types.KX_FontObject.rst

@@ -0,0 +1,32 @@
+KX_FontObject(KX_GameObject)
+============================
+
+.. module:: bge.types
+
+base class --- :class:`KX_GameObject`
+
+.. class:: KX_FontObject(KX_GameObject)
+
+   A Font object.
+
+   .. code-block:: python
+
+      # Display a message about the exit key using a Font object.
+      import bge
+
+      co = bge.logic.getCurrentController()
+      font = co.owner
+
+      exit_key = bge.events.EventToString(bge.logic.getExitKey())
+
+      if exit_key.endswith("KEY"):
+          exit_key = exit_key[:-3]
+
+      font.text = "Press key '%s' to quit the game." % exit_key
+
+   .. attribute:: text
+
+      The text displayed by this Font object.
+
+      :type: string
+

doc/python_api/rst/bge_types/bge.types.KX_GameActuator.rst

@@ -0,0 +1,23 @@
+KX_GameActuator(SCA_IActuator)
+==============================
+
+.. module:: bge.types
+
+base class --- :class:`SCA_IActuator`
+
+.. class:: KX_GameActuator(SCA_IActuator)
+
+   The game actuator loads a new .blend file, restarts the current .blend file or quits the game.
+
+   .. attribute:: fileName
+
+      the new .blend file to load.
+
+      :type: string
+
+   .. attribute:: mode
+
+      The mode of this actuator. Can be on of :ref:`these constants <game-actuator>`
+
+      :type: Int
+

doc/python_api/rst/bge_types/bge.types.KX_LibLoadStatus.rst

@@ -0,0 +1,51 @@
+KX_LibLoadStatus(PyObjectPlus)
+==============================
+
+.. module:: bge.types
+
+base class --- :class:`PyObjectPlus`
+
+.. class:: KX_LibLoadStatus(PyObjectPlus)
+
+   An object providing information about a LibLoad() operation.
+
+   .. code-block:: python
+
+      # Print a message when an async LibLoad is done
+      import bge
+
+      def finished_cb(status):
+          print("Library (%s) loaded in %.2fms." % (status.libraryName, status.timeTaken))
+
+      bge.logic.LibLoad('myblend.blend', 'Scene', async=True).onFinish = finished_cb
+
+   .. attribute:: onFinish
+
+      A callback that gets called when the lib load is done.
+
+      :type: callable
+
+   .. attribute:: finished
+
+      The current status of the lib load.
+
+      :type: boolean
+
+   .. attribute:: progress
+
+      The current progress of the lib load as a normalized value from 0.0 to 1.0.
+
+      :type: float
+
+   .. attribute:: libraryName
+
+      The name of the library being loaded (the first argument to LibLoad).
+
+      :type: string
+
+   .. attribute:: timeTaken
+
+      The amount of time, in seconds, the lib load took (0 until the operation is complete).
+
+      :type: float
+

doc/python_api/rst/bge_types/bge.types.KX_LightObject.rst

@@ -0,0 +1,164 @@
+KX_LightObject(KX_GameObject)
+=============================
+
+.. module:: bge.types
+
+base class --- :class:`KX_GameObject`
+
+.. class:: KX_LightObject(KX_GameObject)
+
+   A Light object.
+
+   .. code-block:: python
+
+      # Turn on a red alert light.
+      import bge
+
+      co = bge.logic.getCurrentController()
+      light = co.owner
+
+      light.energy = 1.0
+      light.color = [1.0, 0.0, 0.0]
+
+   .. data:: SPOT
+
+      A spot light source. See attribute :data:`type`
+
+   .. data:: SUN
+
+      A point light source with no attenuation. See attribute :data:`type`
+
+   .. data:: NORMAL
+
+      A point light source. See attribute :data:`type`
+
+   .. attribute:: type
+
+      The type of light - must be SPOT, SUN or NORMAL
+
+   .. attribute:: layer
+
+      The layer mask that this light affects object on.
+
+      :type: bitfield
+
+   .. attribute:: energy
+
+      The brightness of this light.
+
+      :type: float
+
+   .. attribute:: shadowClipStart
+
+      The shadowmap clip start, below which objects will not generate shadows.
+
+      :type: float (read only)
+
+   .. attribute:: shadowClipEnd
+
+      The shadowmap clip end, beyond which objects will not generate shadows.
+
+      :type: float (read only)
+
+   .. attribute:: shadowFrustumSize
+
+      Size of the frustum used for creating the shadowmap.
+
+      :type: float (read only)
+
+   .. attribute:: shadowBindId
+
+      The OpenGL shadow texture bind number/id.
+
+      :type: int (read only)
+
+   .. attribute:: shadowMapType
+
+      The shadow shadow map type (0 -> Simple; 1 -> Variance)
+
+      :type: int (read only)
+
+   .. attribute:: shadowBias
+
+      The shadow buffer sampling bias.
+
+      :type: float (read only)
+
+   .. attribute:: shadowBleedBias
+
+      The bias for reducing light-bleed on variance shadow maps.
+
+      :type: float (read only)
+
+   .. attribute:: useShadow
+
+      Returns True if the light has Shadow option activated, else returns False.
+
+      :type: boolean (read only)
+
+   .. attribute:: shadowColor
+
+      The color of this light shadows. Black = (0.0, 0.0, 0.0), White = (1.0, 1.0, 1.0).
+
+      :type: :class:`mathutils.Color` (read only)
+
+   .. attribute:: shadowMatrix
+
+      Matrix that converts a vector in camera space to shadow buffer depth space.
+
+      Computed as:
+          mat4_perspective_to_depth * mat4_lamp_to_perspective * mat4_world_to_lamp * mat4_cam_to_world.
+
+      mat4_perspective_to_depth is a fixed matrix defined as follow:
+
+         0.5 0.0 0.0 0.5
+         0.0 0.5 0.0 0.5
+         0.0 0.0 0.5 0.5
+         0.0 0.0 0.0 1.0
+
+      .. note:
+
+         There is one matrix of that type per lamp casting shadow in the scene.
+
+      :type: Matrix4x4 (read only)
+
+   .. attribute:: distance
+
+      The maximum distance this light can illuminate. (SPOT and NORMAL lights only).
+
+      :type: float
+
+   .. attribute:: color
+
+      The color of this light. Black = [0.0, 0.0, 0.0], White = [1.0, 1.0, 1.0].
+
+      :type: list [r, g, b]
+
+   .. attribute:: lin_attenuation
+
+      The linear component of this light's attenuation. (SPOT and NORMAL lights only).
+
+      :type: float
+
+   .. attribute:: quad_attenuation
+
+      The quadratic component of this light's attenuation (SPOT and NORMAL lights only).
+
+      :type: float
+
+   .. attribute:: spotsize
+
+      The cone angle of the spot light, in degrees (SPOT lights only).
+
+      :type: float in [0 - 180].
+
+   .. attribute:: spotblend
+
+      Specifies the intensity distribution of the spot light (SPOT lights only).
+
+      :type: float in [0 - 1]
+
+      .. note::
+         
+         Higher values result in a more focused light source.
+

doc/python_api/rst/bge_types/bge.types.KX_MeshProxy.rst

@@ -0,0 +1,134 @@
+KX_MeshProxy(SCA_IObject)
+=========================
+
+.. module:: bge.types
+
+base class --- :class:`SCA_IObject`
+
+.. class:: KX_MeshProxy(SCA_IObject)
+
+   A mesh object.
+
+   You can only change the vertex properties of a mesh object, not the mesh topology.
+
+   To use mesh objects effectively, you should know a bit about how the game engine handles them.
+
+   #. Mesh Objects are converted from Blender at scene load.
+   #. The Converter groups polygons by Material.  This means they can be sent to the renderer efficiently.  A material holds:
+
+      #. The texture.
+      #. The Blender material.
+      #. The Tile properties
+      #. The face properties - (From the "Texture Face" panel)
+      #. Transparency & z sorting
+      #. Light layer
+      #. Polygon shape (triangle/quad)
+      #. Game Object
+
+   #. Vertices will be split by face if necessary.  Vertices can only be shared between faces if:
+
+      #. They are at the same position
+      #. UV coordinates are the same
+      #. Their normals are the same (both polygons are "Set Smooth")
+      #. They are the same color, for example: a cube has 24 vertices: 6 faces with 4 vertices per face.
+
+   The correct method of iterating over every :class:`KX_VertexProxy` in a game object
+   
+   .. code-block:: python
+
+      from bge import logic
+
+      cont = logic.getCurrentController()
+      object = cont.owner
+
+      for mesh in object.meshes:
+         for m_index in range(len(mesh.materials)):
+            for v_index in range(mesh.getVertexArrayLength(m_index)):
+               vertex = mesh.getVertex(m_index, v_index)
+               # Do something with vertex here...
+               # ... eg: color the vertex red.
+               vertex.color = [1.0, 0.0, 0.0, 1.0]
+
+   .. attribute:: materials
+
+      :type: list of :class:`KX_BlenderMaterial` type
+
+   .. attribute:: numPolygons
+
+      :type: integer
+
+   .. attribute:: numMaterials
+
+      :type: integer
+
+   .. method:: getMaterialName(matid)
+
+      Gets the name of the specified material.
+
+      :arg matid: the specified material.
+      :type matid: integer
+      :return: the attached material name.
+      :rtype: string
+
+   .. method:: getTextureName(matid)
+
+      Gets the name of the specified material's texture.
+
+      :arg matid: the specified material
+      :type matid: integer
+      :return: the attached material's texture name.
+      :rtype: string
+
+   .. method:: getVertexArrayLength(matid)
+
+      Gets the length of the vertex array associated with the specified material.
+
+      There is one vertex array for each material.
+
+      :arg matid: the specified material
+      :type matid: integer
+      :return: the number of verticies in the vertex array.
+      :rtype: integer
+
+   .. method:: getVertex(matid, index)
+
+      Gets the specified vertex from the mesh object.
+
+      :arg matid: the specified material
+      :type matid: integer
+      :arg index: the index into the vertex array.
+      :type index: integer
+      :return: a vertex object.
+      :rtype: :class:`KX_VertexProxy`
+
+   .. method:: getPolygon(index)
+
+      Gets the specified polygon from the mesh.
+
+      :arg index: polygon number
+      :type index: integer
+      :return: a polygon object.
+      :rtype: :class:`KX_PolyProxy`
+
+   .. method:: transform(matid, matrix)
+
+      Transforms the vertices of a mesh.
+
+      :arg matid: material index, -1 transforms all.
+      :type matid: integer
+      :arg matrix: transformation matrix.
+      :type matrix: 4x4 matrix [[float]]
+
+   .. method:: transformUV(matid, matrix, uv_index=-1, uv_index_from=-1)
+
+      Transforms the vertices UV's of a mesh.
+
+      :arg matid: material index, -1 transforms all.
+      :type matid: integer
+      :arg matrix: transformation matrix.
+      :type matrix: 4x4 matrix [[float]]
+      :arg uv_index: optional uv index, -1 for all, otherwise 0 or 1.
+      :type uv_index: integer
+      :arg uv_index_from: optional uv index to copy from, -1 to transform the current uv.
+      :type uv_index_from: integer
+

doc/python_api/rst/bge_types/bge.types.KX_MouseActuator.rst

@@ -0,0 +1,103 @@
+KX_MouseActuator(SCA_IActuator)
+====================================
+
+.. module:: bge.types
+
+base class --- :class:`SCA_IActuator`
+
+.. class:: KX_MouseActuator(SCA_IActuator)
+
+   The mouse actuator gives control over the visibility of the mouse cursor and rotates the parent object according to mouse movement.
+
+   .. method:: reset()
+
+      Undoes the rotation caused by the mouse actuator.
+
+   .. attribute:: visible
+
+      The visibility of the mouse cursor.
+
+      :type: boolean
+
+   .. attribute:: use_axis_x
+
+      Mouse movement along the x axis effects object rotation.
+
+      :type: boolean
+
+   .. attribute:: use_axis_y
+
+      Mouse movement along the y axis effects object rotation.
+
+      :type: boolean
+
+   .. attribute:: threshold
+
+      Amount of movement from the mouse required before rotation is triggered.
+
+      :type: list (vector of 2 floats)
+
+      The values in the list should be between 0.0 and 0.5.
+
+   .. attribute:: reset_x
+
+      Mouse is locked to the center of the screen on the x axis.
+
+      :type: boolean
+
+   .. attribute:: reset_y
+
+      Mouse is locked to the center of the screen on the y axis.
+
+      :type: boolean
+
+   .. attribute:: object_axis
+
+      The object's 3D axis to rotate with the mouse movement. ([x, y])
+
+      :type: list (vector of 2 integers from 0 to 2)
+
+      * KX_ACT_MOUSE_OBJECT_AXIS_X
+      * KX_ACT_MOUSE_OBJECT_AXIS_Y
+      * KX_ACT_MOUSE_OBJECT_AXIS_Z
+
+   .. attribute:: local_x
+
+      Rotation caused by mouse movement along the x axis is local.
+
+      :type: boolean
+
+   .. attribute:: local_y
+
+      Rotation caused by mouse movement along the y axis is local.
+
+      :type: boolean
+
+   .. attribute:: sensitivity
+
+      The amount of rotation caused by mouse movement along the x and y axis.
+
+      :type: list (vector of 2 floats)
+
+      Negative values invert the rotation.
+
+   .. attribute:: limit_x
+
+      The minimum and maximum angle of rotation caused by mouse movement along the x axis in degrees.
+      limit_x[0] is minimum, limit_x[1] is maximum.
+
+      :type: list (vector of 2 floats)
+
+   .. attribute:: limit_y
+
+      The minimum and maximum angle of rotation caused by mouse movement along the y axis in degrees.
+      limit_y[0] is minimum, limit_y[1] is maximum.
+
+      :type: list (vector of 2 floats)
+
+   .. attribute:: angle
+
+      The current rotational offset caused by the mouse actuator in degrees.
+
+      :type: list (vector of 2 floats)
+

doc/python_api/rst/bge_types/bge.types.KX_MouseFocusSensor.rst

@@ -0,0 +1,83 @@
+KX_MouseFocusSensor(SCA_MouseSensor)
+====================================
+
+.. module:: bge.types
+
+base class --- :class:`SCA_MouseSensor`
+
+.. class:: KX_MouseFocusSensor(SCA_MouseSensor)
+
+   The mouse focus sensor detects when the mouse is over the current game object.
+
+   The mouse focus sensor works by transforming the mouse coordinates from 2d device
+   space to 3d space then raycasting away from the camera.
+
+   .. attribute:: raySource
+
+      The worldspace source of the ray (the view position).
+
+      :type: list (vector of 3 floats)
+
+   .. attribute:: rayTarget
+
+      The worldspace target of the ray.
+
+      :type: list (vector of 3 floats)
+
+   .. attribute:: rayDirection
+
+      The :data:`rayTarget` - :class:`raySource` normalized.
+
+      :type: list (normalized vector of 3 floats)
+
+   .. attribute:: hitObject
+
+      the last object the mouse was over.
+
+      :type: :class:`KX_GameObject` or None
+
+   .. attribute:: hitPosition
+
+      The worldspace position of the ray intersecton.
+
+      :type: list (vector of 3 floats)
+
+   .. attribute:: hitNormal
+
+      the worldspace normal from the face at point of intersection.
+
+      :type: list (normalized vector of 3 floats)
+
+   .. attribute:: hitUV
+
+      the UV coordinates at the point of intersection.
+
+      :type: list (vector of 2 floats)
+
+      If the object has no UV mapping, it returns [0, 0].
+
+      The UV coordinates are not normalized, they can be < 0 or > 1 depending on the UV mapping.
+
+   .. attribute:: usePulseFocus
+
+      When enabled, moving the mouse over a different object generates a pulse. (only used when the 'Mouse Over Any' sensor option is set).
+
+      :type: boolean
+
+   .. attribute:: useXRay
+
+      If enabled it allows the sensor to see through game objects that don't have the selected property or material.
+
+     :type: boolean
+
+   .. attribute:: propName
+
+      The property or material the sensor is looking for.
+
+     :type: string
+
+   .. attribute:: useMaterial
+
+      Determines if the sensor is looking for a property or material. KX_True = Find material; KX_False = Find property.
+
+     :type: boolean

doc/python_api/rst/bge_types/bge.types.KX_NavMeshObject.rst

@@ -0,0 +1,47 @@
+KX_NavMeshObject(KX_GameObject)
+===============================
+
+.. module:: bge.types
+
+base class --- :class:`KX_GameObject`
+
+.. class:: KX_NavMeshObject(KX_GameObject)
+
+   Python interface for using and controlling navigation meshes. 
+
+   .. method:: findPath(start, goal)
+
+      Finds the path from start to goal points.
+
+      :arg start: the start point
+      :arg start: 3D Vector
+      :arg goal: the goal point
+      :arg start: 3D Vector
+      :return: a path as a list of points
+      :rtype: list of points
+
+   .. method:: raycast(start, goal)
+
+      Raycast from start to goal points.
+
+      :arg start: the start point
+      :arg start: 3D Vector
+      :arg goal: the goal point
+      :arg start: 3D Vector
+      :return: the hit factor
+      :rtype: float
+
+   .. method:: draw(mode)
+
+      Draws a debug mesh for the navigation mesh.
+
+      :arg mode: the drawing mode (one of :ref:`these constants <navmesh-draw-mode>`)
+      :arg mode: integer
+      :return: None
+
+   .. method:: rebuild()
+
+      Rebuild the navigation mesh.
+
+      :return: None
+

doc/python_api/rst/bge_types/bge.types.KX_NearSensor.rst

@@ -0,0 +1,23 @@
+KX_NearSensor(KX_TouchSensor)
+=============================
+
+.. module:: bge.types
+
+base class --- :class:`KX_TouchSensor`
+
+.. class:: KX_NearSensor(KX_TouchSensor)
+
+   A near sensor is a specialised form of touch sensor.
+
+   .. attribute:: distance
+
+      The near sensor activates when an object is within this distance.
+
+      :type: float
+
+   .. attribute:: resetDistance
+
+      The near sensor deactivates when the object exceeds this distance.
+
+      :type: float
+

doc/python_api/rst/bge_types/bge.types.KX_NetworkMessageActuator.rst

@@ -0,0 +1,35 @@
+KX_NetworkMessageActuator(SCA_IActuator)
+========================================
+
+.. module:: bge.types
+
+base class --- :class:`SCA_IActuator`
+
+.. class:: KX_NetworkMessageActuator(SCA_IActuator)
+
+   Message Actuator
+
+   .. attribute:: propName
+
+      Messages will only be sent to objects with the given property name.
+
+      :type: string
+
+   .. attribute:: subject
+
+      The subject field of the message.
+
+      :type: string
+
+   .. attribute:: body
+
+      The body of the message.
+
+      :type: string
+
+   .. attribute:: usePropBody
+
+      Send a property instead of a regular body message.
+
+      :type: boolean
+

doc/python_api/rst/bge_types/bge.types.KX_NetworkMessageSensor.rst

@@ -0,0 +1,38 @@
+KX_NetworkMessageSensor(SCA_ISensor)
+====================================
+
+.. module:: bge.types
+
+base class --- :class:`SCA_ISensor`
+
+.. class:: KX_NetworkMessageSensor(SCA_ISensor)
+
+   The Message Sensor logic brick.
+
+   Currently only loopback (local) networks are supported.
+
+   .. attribute:: subject
+
+      The subject the sensor is looking for.
+
+      :type: string
+
+   .. attribute:: frameMessageCount
+
+      The number of messages received since the last frame. (read-only).
+
+      :type: integer
+
+   .. attribute:: subjects
+
+      The list of message subjects received. (read-only).
+
+      :type: list of strings
+
+   .. attribute:: bodies
+
+      The list of message bodies received. (read-only).
+
+      :type: list of strings
+
+

doc/python_api/rst/bge_types/bge.types.KX_ObjectActuator.rst

@@ -0,0 +1,129 @@
+KX_ObjectActuator(SCA_IActuator)
+================================
+
+.. module:: bge.types
+
+base class --- :class:`SCA_IActuator`
+
+.. class:: KX_ObjectActuator(SCA_IActuator)
+
+   The object actuator ("Motion Actuator") applies force, torque, displacement, angular displacement, 
+   velocity, or angular velocity to an object.
+   Servo control allows to regulate force to achieve a certain speed target.
+
+   .. attribute:: force
+
+      The force applied by the actuator.
+
+      :type: Vector((x, y, z))
+
+   .. attribute:: useLocalForce
+
+      A flag specifying if the force is local.
+
+      :type: boolean
+
+   .. attribute:: torque
+
+      The torque applied by the actuator.
+
+      :type: Vector((x, y, z))
+
+   .. attribute:: useLocalTorque
+
+      A flag specifying if the torque is local.
+
+      :type: boolean
+
+   .. attribute:: dLoc
+
+      The displacement vector applied by the actuator.
+
+      :type: Vector((x, y, z))
+
+   .. attribute:: useLocalDLoc
+
+      A flag specifying if the dLoc is local.
+
+      :type: boolean
+
+   .. attribute:: dRot
+
+      The angular displacement vector applied by the actuator
+
+      :type: Vector((x, y, z))
+      
+      .. note::
+      
+         Since the displacement is applied every frame, you must adjust the displacement based on the frame rate, or you game experience will depend on the player's computer speed.
+
+   .. attribute:: useLocalDRot
+
+      A flag specifying if the dRot is local.
+
+      :type: boolean
+
+   .. attribute:: linV
+
+      The linear velocity applied by the actuator.
+
+      :type: Vector((x, y, z))
+
+   .. attribute:: useLocalLinV
+
+      A flag specifying if the linear velocity is local.
+
+      :type: boolean
+      
+      .. note::
+      
+         This is the target speed for servo controllers.
+
+   .. attribute:: angV
+
+      The angular velocity applied by the actuator.
+
+      :type: Vector((x, y, z))
+
+   .. attribute:: useLocalAngV
+
+      A flag specifying if the angular velocity is local.
+
+      :type: boolean
+
+   .. attribute:: damping
+
+      The damping parameter of the servo controller.
+
+      :type: short
+
+   .. attribute:: forceLimitX
+
+      The min/max force limit along the X axis and activates or deactivates the limits in the servo controller.
+
+      :type: list [min(float), max(float), bool]
+
+   .. attribute:: forceLimitY
+
+      The min/max force limit along the Y axis and activates or deactivates the limits in the servo controller.
+
+      :type: list [min(float), max(float), bool]
+
+   .. attribute:: forceLimitZ
+
+      The min/max force limit along the Z axis and activates or deactivates the limits in the servo controller.
+
+      :type: list [min(float), max(float), bool]
+
+   .. attribute:: pid
+
+      The PID coefficients of the servo controller.
+
+      :type: list of floats [proportional, integral, derivate]
+
+   .. attribute:: reference
+
+      The object that is used as reference to compute the velocity for the servo controller.
+
+      :type: :class:`KX_GameObject` or None
+

doc/python_api/rst/bge_types/bge.types.KX_ParentActuator.rst

@@ -0,0 +1,38 @@
+KX_ParentActuator(SCA_IActuator)
+================================
+
+.. module:: bge.types
+
+base class --- :class:`SCA_IActuator`
+
+.. class:: KX_ParentActuator(SCA_IActuator)
+
+   The parent actuator can set or remove an objects parent object.
+
+   .. attribute:: object
+
+      the object this actuator sets the parent too.
+
+      :type: :class:`KX_GameObject` or None
+
+   .. attribute:: mode
+
+      The mode of this actuator.
+
+      :type: integer from 0 to 1.
+
+   .. attribute:: compound
+
+      Whether the object shape should be added to the parent compound shape when parenting.
+
+      Effective only if the parent is already a compound shape.
+
+      :type: boolean
+
+   .. attribute:: ghost
+
+      Whether the object should be made ghost when parenting
+      Effective only if the shape is not added to the parent compound shape.
+
+      :type: boolean
+

doc/python_api/rst/bge_types/bge.types.KX_PolyProxy.rst

@@ -0,0 +1,139 @@
+KX_PolyProxy(SCA_IObject)
+=========================
+
+.. module:: bge.types
+
+base class --- :class:`SCA_IObject`
+
+.. class:: KX_PolyProxy(SCA_IObject)
+
+   A polygon holds the index of the vertex forming the poylgon.
+
+   Note:
+   The polygon attributes are read-only, you need to retrieve the vertex proxy if you want
+   to change the vertex settings.
+
+   .. attribute:: material_name
+
+      The name of polygon material, empty if no material.
+
+      :type: string
+
+   .. attribute:: material
+
+      The material of the polygon.
+
+      :type: :class:`KX_BlenderMaterial`
+
+   .. attribute:: texture_name
+
+      The texture name of the polygon.
+
+      :type: string
+
+   .. attribute:: material_id
+
+      The material index of the polygon, use this to retrieve vertex proxy from mesh proxy.
+
+      :type: integer
+
+   .. attribute:: v1
+
+      vertex index of the first vertex of the polygon, use this to retrieve vertex proxy from mesh proxy.
+
+      :type: integer
+
+   .. attribute:: v2
+
+      vertex index of the second vertex of the polygon, use this to retrieve vertex proxy from mesh proxy.
+
+      :type: integer
+
+   .. attribute:: v3
+
+      vertex index of the third vertex of the polygon, use this to retrieve vertex proxy from mesh proxy.
+
+      :type: integer
+
+   .. attribute:: v4
+
+      Vertex index of the fourth vertex of the polygon, 0 if polygon has only 3 vertex
+      Use this to retrieve vertex proxy from mesh proxy.
+
+      :type: integer
+
+   .. attribute:: visible
+
+      visible state of the polygon: 1=visible, 0=invisible.
+
+      :type: integer
+
+   .. attribute:: collide
+
+      collide state of the polygon: 1=receives collision, 0=collision free.
+
+      :type: integer
+
+   .. method:: getMaterialName()
+
+      Returns the polygon material name with MA prefix
+
+      :return: material name
+      :rtype: string
+
+   .. method:: getMaterial()
+
+      :return: The polygon material
+      :rtype: :class:`KX_BlenderMaterial`
+
+   .. method:: getTextureName()
+
+      :return: The texture name
+      :rtype: string
+
+   .. method:: getMaterialIndex()
+
+      Returns the material bucket index of the polygon.
+      This index and the ones returned by getVertexIndex() are needed to retrieve the vertex proxy from :class:`MeshProxy`.
+
+      :return: the material index in the mesh
+      :rtype: integer
+
+   .. method:: getNumVertex()
+
+      Returns the number of vertex of the polygon.
+
+      :return: number of vertex, 3 or 4.
+      :rtype: integer
+
+   .. method:: isVisible()
+
+      Returns whether the polygon is visible or not
+
+      :return: 0=invisible, 1=visible
+      :rtype: boolean
+
+   .. method:: isCollider()
+
+      Returns whether the polygon is receives collision or not
+
+      :return: 0=collision free, 1=receives collision
+      :rtype: integer
+
+   .. method:: getVertexIndex(vertex)
+
+      Returns the mesh vertex index of a polygon vertex
+      This index and the one returned by getMaterialIndex() are needed to retrieve the vertex proxy from :class:`MeshProxy`.
+
+      :arg vertex: index of the vertex in the polygon: 0->3
+      :arg vertex: integer
+      :return: mesh vertex index
+      :rtype: integer
+
+   .. method:: getMesh()
+
+      Returns a mesh proxy
+
+      :return: mesh proxy
+      :rtype: :class:`MeshProxy`
+

doc/python_api/rst/bge_types/bge.types.KX_RadarSensor.rst

@@ -0,0 +1,44 @@
+KX_RadarSensor(KX_NearSensor)
+=============================
+
+.. module:: bge.types
+
+base class --- :class:`KX_NearSensor`
+
+.. class:: KX_RadarSensor(KX_NearSensor)
+
+   Radar sensor is a near sensor with a conical sensor object.
+
+   .. attribute:: coneOrigin
+
+      The origin of the cone with which to test. The origin is in the middle of the cone. (read-only).
+
+      :type: list of floats [x, y, z]
+
+   .. attribute:: coneTarget
+
+      The center of the bottom face of the cone with which to test. (read-only).
+
+      :type: list of floats [x, y, z]
+
+   .. attribute:: distance
+
+      The height of the cone with which to test.
+
+      :type: float
+
+   .. attribute:: angle
+
+      The angle of the cone (in degrees) with which to test.
+
+      :type: float
+
+   .. attribute:: axis
+
+      The axis on which the radar cone is cast.
+
+      :type: integer from 0 to 5
+
+      KX_RADAR_AXIS_POS_X, KX_RADAR_AXIS_POS_Y, KX_RADAR_AXIS_POS_Z, 
+      KX_RADAR_AXIS_NEG_X, KX_RADAR_AXIS_NEG_Y, KX_RADAR_AXIS_NEG_Z
+

doc/python_api/rst/bge_types/bge.types.KX_RaySensor.rst

@@ -0,0 +1,78 @@
+KX_RaySensor(SCA_ISensor)
+=========================
+
+.. module:: bge.types
+
+base class --- :class:`SCA_ISensor`
+
+.. class:: KX_RaySensor(SCA_ISensor)
+
+   A ray sensor detects the first object in a given direction.
+
+   .. attribute:: propName
+
+      The property the ray is looking for.
+
+      :type: string
+
+   .. attribute:: range
+
+      The distance of the ray.
+
+      :type: float
+
+   .. attribute:: useMaterial
+
+      Whether or not to look for a material (false = property).
+
+      :type: boolean
+
+   .. attribute:: useXRay
+
+      Whether or not to use XRay.
+
+      :type: boolean
+
+   .. attribute:: hitObject
+
+      The game object that was hit by the ray. (read-only).
+
+      :type: :class:`KX_GameObject`
+
+   .. attribute:: hitPosition
+
+      The position (in worldcoordinates) where the object was hit by the ray. (read-only).
+
+      :type: list [x, y, z]
+
+   .. attribute:: hitNormal
+
+      The normal (in worldcoordinates) of the object at the location where the object was hit by the ray. (read-only).
+
+      :type: list [x, y, z]
+
+   .. attribute:: hitMaterial
+
+      The material of the object in the face hit by the ray. (read-only).
+
+      :type: string
+
+   .. attribute:: rayDirection
+
+      The direction from the ray (in worldcoordinates). (read-only).
+
+      :type: list [x, y, z]
+
+   .. attribute:: axis
+
+      The axis the ray is pointing on.
+
+      :type: integer from 0 to 5
+
+      * KX_RAY_AXIS_POS_X
+      * KX_RAY_AXIS_POS_Y
+      * KX_RAY_AXIS_POS_Z
+      * KX_RAY_AXIS_NEG_X
+      * KX_RAY_AXIS_NEG_Y
+      * KX_RAY_AXIS_NEG_Z
+

doc/python_api/rst/bge_types/bge.types.KX_SCA_AddObjectActuator.rst

@@ -0,0 +1,55 @@
+KX_SCA_AddObjectActuator(SCA_IActuator)
+=======================================
+
+.. module:: bge.types
+
+base class --- :class:`SCA_IActuator`
+
+.. class:: KX_SCA_AddObjectActuator(SCA_IActuator)
+
+   Edit Object Actuator (in Add Object Mode)
+
+   .. warning::
+
+      An Add Object actuator will be ignored if at game start, the linked object doesn't exist (or is empty) or the linked object is in an active layer.
+
+      .. code-block:: none
+
+         Error: GameObject 'Name' has a AddObjectActuator 'ActuatorName' without object (in 'nonactive' layer) 
+      
+   .. attribute:: object
+
+      the object this actuator adds.
+
+      :type: :class:`KX_GameObject` or None
+
+   .. attribute:: objectLastCreated
+
+      the last added object from this actuator (read-only).
+
+      :type: :class:`KX_GameObject` or None
+
+   .. attribute:: time
+
+      the lifetime of added objects, in frames. Set to 0 to disable automatic deletion.
+
+      :type: integer
+
+   .. attribute:: linearVelocity
+
+      the initial linear velocity of added objects.
+
+      :type: list [vx, vy, vz]
+
+   .. attribute:: angularVelocity
+
+      the initial angular velocity of added objects.
+
+      :type: list [vx, vy, vz]
+
+   .. method:: instantAddObject()
+
+      adds the object without needing to calling SCA_PythonController.activate()
+
+      .. note:: Use objectLastCreated to get the newly created object.
+

doc/python_api/rst/bge_types/bge.types.KX_SCA_DynamicActuator.rst

@@ -0,0 +1,29 @@
+KX_SCA_DynamicActuator(SCA_IActuator)
+=====================================
+
+.. module:: bge.types
+
+base class --- :class:`SCA_IActuator`
+
+.. class:: KX_SCA_DynamicActuator(SCA_IActuator)
+
+   Dynamic Actuator.
+
+   .. attribute:: mode
+
+      :type: integer
+
+      the type of operation of the actuator, 0-4
+
+      * KX_DYN_RESTORE_DYNAMICS(0)
+      * KX_DYN_DISABLE_DYNAMICS(1)
+      * KX_DYN_ENABLE_RIGID_BODY(2)
+      * KX_DYN_DISABLE_RIGID_BODY(3)
+      * KX_DYN_SET_MASS(4)
+
+   .. attribute:: mass
+
+      the mass value for the KX_DYN_SET_MASS operation.
+
+      :type: float
+