Caused by rB85fe12071ad7.
When looking at a render pass in viewport and move the camera, there's a
"flash" effect in this AOVs test file:
{F9753476}
{F9753473}
The cause seems to be that taa_current_sample when rendering
(DRW_state_is_image_render()) is ok because it has been incremented in
EEVEE_temporal_sampling_draw but taa_current_sample is wrong when we are
not rendering.
D10375 by Ulysse Martin (youle) with clang format changes.
Reviewed By: jbakker, lichtwerk, also blessing from fclem
Differential Revision: https://developer.blender.org/D10375
To avoid anti-aliasing artifacts on GPencil strokes that have a size smaller than 1 the thickness
is clamped and the opacity reduced. This was done in vertex shader but this had the side effect
of causing strokes that go from large to small to fade across their lengths.
**Solution**
The opacity modulation has now been moved to the fragment shader as advised by Clément Foucault.
The strokeThickness that was passed to the shader was clamped to prevent it from being too small so an additional
unclamped thickness has been passed to the fragment to calculate the opacity modulation. Alternatively I could have chosen
strokeThickness and clampedThickness but I decided against renaming the variables in the current code.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D10438
This improves stability and convergence speed of Workbench Temporal AntiAliasing.
This adds a filtering kernel (blackmann-haris, same as EEVEE/Cycles) to the
temporal antialiasing sampling. We also gather neighbor pixels since they might
end up in the pixel footprint.
We use a 1px radius for the filter window which is a bit less than the 1.5 default
of cycles and EEVEE since it does blur quite a bit more than what we have now.
Another improvement is that the filtering is now in log space which improves
AntiAliasing around highlights.
Theses improvement may not be very useful for every day case but it was an
experiment to try to make TAA usable for GPencil.
Test file used :
{F9798807}
|filtered+logspace|filtered|original|
|{F9798847}|{F9798848}|{F9798849}|
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D10414
A fix for T83187 (rBf83aa830) assumed in the overlay code of the uv editor that the object was a mesh
when it did not have to be - causing a crash.
The fix makes sure that the object is a mesh.
Reviewed By: jbakker, campbellbarton
Maniphest Tasks: T85499, T85495
Differential Revision: https://developer.blender.org/D10369
Corrects approximately 36 spelling errors in source variable names.
Differential Revision: https://developer.blender.org/D10347
Reviewed by Hans Goudey
This changes the roughness mapping to better utilize the mip chain resolution.
This improves glossy reflections with small roughness.
Lightcache version bumped because old data does not have the same roughness
mapping and cannot be used.
This modifies the principled BSDF and the Glass BSDF which now
have better fit to multiscatter GGX.
Code to generate the LUT have been updated and can run at runtime.
The refraction LUT has been changed to have the critical angle always
centered around one pixel so that interpolation can be mitigated.
Offline LUT data will be updated in another commit
This simplify the BTDF retreival removing the manual clean cut at
low roughness. This maximize the precision of the LUT by scalling
the sides by the critical angle.
I also touched the ior > 1.0 approximation to be smoother.
Also incluse some cleanup of bsdf_sampling.glsl
This refactor was needed for some reasons:
- closure_lit_lib.glsl was unreadable and could not be easily extended to use new features.
- It was generating ~5K LOC for any shader. Slowing down compilation.
- Some calculations were incorrect and BSDF/Closure code had lots of workaround/hacks.
What this refactor does:
- Add some macros to define the light object loops / eval.
- Clear separation between each closures which now have separate files. Each closure implements the eval functions.
- Make principled BSDF a bit more correct in some cases (specular coloring, mix between glass and opaque).
- The BSDF term are applied outside of the eval function and on the whole lighting (was separated for lights before).
- Make light iteration last to avoid carrying more data than needed.
- Makes sure that all inputs are within correct ranges before evaluating the closures (use `safe_normalize` on normals).
- Making each BSDF isolated means that we might carry duplicated data (normals for instance) but this should be optimized by compilers.
- Makes Translucent BSDF its own closure type to avoid having to disable raytraced shadows using hacks.
- Separate transmission roughness is now working on Principled BSDF.
- Makes principled shader variations using constants. Removing a lot of duplicated code. This needed `const` keyword detection in `gpu_material_library.c`.
- SSR/SSS masking and data loading is a bit more consistent and defined outside of closure eval. The loading functions will act as accumulator if the lighting is not to be separated.
- SSR pass now do a full deferred lighting evaluation, including lights, in order to avoid interference with the closure eval code. However, it seems that the cost of having a global SSR toggle uniform is making the surface shader more expensive (which is already the case, by the way).
- Principle fully black specular tint now returns black instead of white.
- This fixed some artifact issue on my AMD computer on normal surfaces (which might have been some uninitialized variables).
- This touched the Ambient Occlusion because it needs to be evaluated for each closure. But to avoid the cost of this, we use another approach to just pass the result of the occlusion on interpolated normals and modify it using the bent normal for each Closure. This tends to reduce shadowing. I'm still looking into improving this but this is out of the scope of this patch.
- Performance might be a bit worse with this patch since it is more oriented towards code modularity. But not by a lot.
Render tests needs to be updated after this.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D10390
# Conflicts:
# source/blender/draw/engines/eevee/eevee_shaders.c
# source/blender/draw/engines/eevee/shaders/common_utiltex_lib.glsl
# source/blender/draw/intern/shaders/common_math_lib.glsl
This is a complete refactor over the old system. The goal was to increase quality
first and then have something more flexible and optimised.
|{F9603145} | {F9603142}|{F9603147}|
This fixes issues we had with the old system which were:
- Too much overdraw (low performance).
- Not enough precision in render targets (hugly color banding/drifting).
- Poor resolution near in-focus regions.
- Wrong support of orthographic views.
- Missing alpha support in viewport.
- Missing bokeh shape inversion on foreground field.
- Issues on some GPUs. (see T72489) (But I'm sure this one will have other issues as well heh...)
- Fix T81092
I chose Unreal's Diaphragm DOF as a reference / goal implementation.
It is well described in the presentation "A Life of a Bokeh" by Guillaume Abadie.
You can check about it here https://epicgames.ent.box.com/s/s86j70iamxvsuu6j35pilypficznec04
Along side the main implementation we provide a way to increase the quality by jittering the
camera position for each sample (the ones specified under the Sampling tab).
The jittering is dividing the actual post processing dof radius so that it fills the undersampling.
The user can still add more overblur to have a noiseless image, but reducing bokeh shape sharpness.
Effect of overblur (left without, right with):
| {F9603122} | {F9603123}|
The actual implementation differs a bit:
- Foreground gather implementation uses the same "ring binning" accumulator as background
but uses a custom occlusion method. This gives the problem of inflating the foreground elements
when they are over background or in-focus regions.
This is was a hard decision but this was preferable to the other method that was giving poor
opacity masks for foreground and had other more noticeable issues. Do note it is possible
to improve this part in the future if a better alternative is found.
- Use occlusion texture for foreground. Presentation says it wasn't really needed for them.
- The TAA stabilisation pass is replace by a simple neighborhood clamping at the reduce copy
stage for simplicity.
- We don't do a brute-force in-focus separate gather pass. Instead we just do the brute force
pass during resolve. Using the separate pass could be a future optimization if needed but
might give less precise results.
- We don't use compute shaders at all so shader branching might not be optimal. But performance
is still way better than our previous implementation.
- We mainly rely on density change to fix all undersampling issues even for foreground (which
is something the reference implementation is not doing strangely).
Remaining issues (not considered blocking for me):
- Slight defocus stability: Due to slight defocus bruteforce gather using the bare scene color,
highlights are dilated and make convergence quite slow or imposible when using jittered DOF
(or gives )
- ~~Slight defocus inflating: There seems to be a 1px inflation discontinuity of the slight focus
convolution compared to the half resolution. This is not really noticeable if using jittered
camera.~~ Fixed
- Foreground occlusion approximation is a bit glitchy and gives incorrect result if the
a defocus foreground element overlaps a farther foreground element. Note that this is easily
mitigated using the jittered camera position.
|{F9603114}|{F9603115}|{F9603116}|
- Foreground is inflating, not revealing background. However this avoids some other bugs too
as discussed previously. Also mitigated with jittered camera position.
|{F9603130}|{F9603129}|
- Sensor vertical fit is still broken (does not match cycles).
- Scattred bokeh shapes can be a bit strange at polygon vertices. This is due to the distance field
stored in the Bokeh LUT which is not rounded at the edges. This is barely noticeable if the
shape does not rotate.
- ~~Sampling pattern of the jittered camera position is suboptimal. Could try something like hammersley
or poisson disc distribution.~~Used hexaweb sampling pattern which is not random but has better
stability and overall coverage.
- Very large bokeh (> 300 px) can exhibit undersampling artifact in gather pass and quite a bit of
bleeding. But at this size it is preferable to use jittered camera position.
Codewise the changes are pretty much self contained and each pass are well documented.
However the whole pipeline is quite complex to understand from bird's-eye view.
Notes:
- There is the possibility of using arbitrary bokeh texture with this implementation.
However implementation is a bit involved.
- Gathering max sample count is hardcoded to avoid to deal with shader variations. The actual
max sample count is already quite high but samples are not evenly distributed due to the
ring binning method.
- While this implementation does not need 32bit/channel textures to render correctly it does use
many other textures so actual VRAM usage is higher than previous method for viewport but less
for render. Textures are reused to avoid many allocations.
- Bokeh LUT computation is fast and done for each redraw because it can be animated. Also the
texture can be shared with other viewport with different camera settings.
Regression introduced by {rBed809866b172} where overlays weren't drawn
when overlays are turned off. The background in wireframe, solid
(always) and material preview and render preview (when not using scene
world) are also part of the overlays.
Caused by rBf83aa830cd00.
Since above commit, only meshes in editmode were considered for drawing
(because
BKE_view_layer_array_from_objects_in_edit_mode_unique_data_with_uvs was
used), but the option needs to work for texture paint mode as well, so
use BKE_view_layer_array_from_objects_in_mode_unique_data instead on
pass the draw_ctx->object_mode.
note: there is no good filter_fn to check if we have UVs if mesh is not
in editmode, this shouldnt cause much of a performance hit though.
Maniphest Tasks: T85396
Differential Revision: https://developer.blender.org/D10319
In everything in `EEVEE_renderpasses_postprocess` (or the corresponding
renderpass_postprocess_frag.glsl) colors get divided by a
'currentSample'.
This 'currentSample' is always incremented in
`EEVEE_temporal_sampling_draw` (and also one more time before we reach
`EEVEE_renderpasses_postprocess`.
This results in a "off-by-one", slightly inacurate colors and slight
inaccurate transparency (in certain passes like AOVs).
Now decrement the currentSample `EEVEE_renderpasses_postprocess` again
by one to compensate.
Maniphest Tasks: T85261
Differential Revision: https://developer.blender.org/D10286
Related to {D10286}. When volumetrics are used in the scene the coverage
is incorrect. The reason is that the current sample is 1 over the num
samples that are calculated.
Related to {D10286}. When volumetrics are used in the scene the coverage
is incorrect. The reason is that the current sample is 1 over the num
samples that are calculated.
This resulted in hair drawing with an offset if an instance_offset was
set.
note: Usually the instance_offset gets combined with the objects obmat
in 'make_duplis_collection' / 'make_dupli', see
> /* Combine collection offset and `obmat`. */
Using the resulting DupliObject->mat instead does include the
instance_offset, but this results in double-transforms (something that I
have not investigated further), so now reconstruct the correct matrix
from scratch.
Maniphest Tasks: T85301
Differential Revision: https://developer.blender.org/D10285
This was caused by the paint overlay drawing after the infront pass.
Moving the paint overlay before it fixes the issue. We might even do
that for more mode overlays.
