Tool settings for sequencer were not initialized, which caused crash
when adding strips.
There was fix for same issue in versioning rB0f81dafe6cec, but
subversion was not bumped, so files with uninitialized tool settings
may still exist.
Add `SEQ_tool_settings_get()` accessor function that will initialize
tool settings if they are missing. Change operator code to use
`SEQ_tool_settings_fit_method_get()` function instead of accessing
tool settings directly
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D11383
This will update active camera based on the maker for each frame.
Reviewed By: Sebastian Parborg (zeddb), Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D11358
Do not allow a window to be created that has a top position that
can obscure all or part of title bar. Right and Left edges can
still be specified slightly outside of monitor bounds, but top
edge must be clamped to monitor top.
see D11371 for more details.
https://developer.blender.org/D11371
Reviewed by Ray Molenkamp
This fallback is an old hack.
It is difficult to have an orientation convention when several random
factors determine which one should be used.
In this case, to "fix" the problem, a new behavior had to be implemented.
Now the redo when moving the camera in `Camera View` has the default
orientation as `View`.
Deduplicates code by introducing a PlaneDirtortBaseOperation for common logic.
Reviewed By: #compositing, jbakker
Differential Revision: https://developer.blender.org/D11273
Prepare node for conversion to Geometry Nodes.
There should be no functional changes.
Reviewed By: JacquesLucke, LazyDodo
Differential Revision: https://developer.blender.org/D11226
When sound strip is above another strip such as movie strip, it prevents
from rendering movie strip.
This bug was introduced in 0b7744f4da. Function `must_render_strip()`
checks if there is any strip with `SEQ_BLEND_REPLACE` blending and
considers this strip as lowest strip in stack. Sound strips do have this
blend mode set, which caused the bug.
Remove all sound strips and muted strips from stack collection before
checking with `must_render_strip()` function
I'd like to use this file to draw curves from geometry nodes, which
would otherwise require implementing a C API. The changes in this
commit are minimal, mostly just casts and changing to nullptr.
Differential Revision: https://developer.blender.org/D11350
The CoW copy of the node group was not updated correctly after it
changed. Arguably, tagging the node tree could also be part of
`ntreeUpdateTree` (which needs to be called after changes to the
node tree anyway). However, there are many instances where the
depsgraph is tagged explicitly after `ntreeUpdateTree` is called,
so it should be fine here as well. This is similar to what is done
in `snode_dag_update`.
Differential Revision: https://developer.blender.org/D11342
The wrong matrix function was used and overwrote the custom bone shape
scale instead of reading from it.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D11330
When creating Win32 windows, the sizes and placements can be out by a
small amount, mostly noticeable near monitor edges. This is because
Windows 10 includes a thin invisible border (typically 7 pixels) when
determining position. Therefore the correct values can sometimes be
just outside the monitor bounds, but we clamp them at those bounds.
This patch fixes this by first clamping the requested values to monitor
bounds, adjusting for window chrome with AdjustWindowRectEx(), and then
using those adjusted values in CreateWindowExW().
see D11314 for more details.
Differential Revision: https://developer.blender.org/D11314
Reviewed by Ray Molenkamp
Accessing data through RNA should never implicitely create it. Objects'
and particles' forcefields and collision settings were doing this.
Note that UI code also had to be tweaked to properly handle `None`
(NULL) cases.
Differential Revision: https://developer.blender.org/D11341
This data (the force fields) are expected to always be there, but they
are currently created on the fly by RNA accessors (typically from UI
draw code), which is extremely wrong way to do it.
Differential Revision: https://developer.blender.org/D11341
This is an initial change to speed up the calculation of the Occlude eraser. In the future, we can add more optimizations, but at least this increase speed.
Intead to check always the 3 points, the check is skipped if it's not required.
Base in a solution by Philipp Oeser.
This is related to T88412
Root of the issue was actually hidden deep in depsgraph itself: it would
not properly update all of its COW IDs using a datablock when depsgraph
decides to evaluate or un-evaluate it.
This would lead to evaluated IDs pointing to either:
- orig IDs when there was an evaluated version of those (annoying bug,
but not a crashing one).
- old address of previously evaluated IDs that no longer exists in the
depsgraph (causing the crash from the report e.g.).
This commit adds an extra step at the end of nodes building, that goes
over all of already existing IDs in the depsgraph to check whether they
do one of the two things above, and tag them for COW update if so.
NOTE: This only affects depsgraph (re-)building, not its evaluation.
This remains consistent with the fact that operations that may change
the depsgraph content (like Collection exclusion etc.) need to trigger a
rebuild.
NOTE: Performances: Worst case scenarii, like (un-)excluding a whole
character collection in a production file, lead to 5% to 10% extra
processing time in depsgraph building. Most of it comming from extra COW
processing (in depsgraph's update in `build_step_finalize`), the detection
loop itself only accounts for 1% to 2% of the whole building time.
Maniphest Tasks: T85752
Differential Revision: https://developer.blender.org/D10907
This node can change all faces that use a specific material to use a
different material. Using this node is significantly more efficient
than creating a selection from all faces with a specific material
index and then using the Material Assign node.
Ref T88055.
Differential Revision: https://developer.blender.org/D11325
Share the pointer with the original mesh instead, this matches behavior
of all other objects edit-mode data.
Duplicating the edit-mesh pointer makes updates to edit-mesh require
a COPY_ON_WRITE update, which is currently an expensive operation
(copying the entire mesh).
Notes:
- This change is from 802027f3f8
so the edit-meshes object pointer `BMEditMesh.ob` referenced the COW
version of the object. This pointer has since been removed, so the
copy is no longer needed.
- Having a separate edit-mesh pointer could be used so linked duplicates
could have their own generated meshes. For this to be supported,
many other changes would be needed: see D10920.
This patch adds wavelength node support to Eevee, similar to how
Eevee Blackbody node works, thus it is a little off from Cycles.
Reviewed By: #eevee_viewport, fclem, brecht
Differential Revision: https://developer.blender.org/D11326
Previously, the "follow path constraint" and "follow parented curve"
were clamped. This restriction was lifted in rBcf2baa585cc8
Add back an option to get the old behavior in the "Path animation" settings.
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D11263
Since version 2.80, the annotations of the Scene strip were not displayed in VSE. Also, the UI panel was`Grease Pencil` and must be `Annotation`
The problem was the offscreen render hasn't evil_CTX and the section of the annotation was never called.
Differential Revision: https://developer.blender.org/D11329
Make `CMAKE_OSX_DEPLOYMENT_TARGET` independent of buildbot settings and
always set to `OSX_MIN_DEPLOYMENT_TARGET`. That fixes the launch error
on OS older than buildbot's.
Remove unused `MACOSX_DEPLOYMENT_TARGET`.
Fix T88419
Diff D11323
Since there is a special callback for assigning the name from the
search box, and the callback doesn't call an operator or something
else that would do an undo push, I think the solution is to do it
manually here.
Another option would be adding the button flag "UI_BUT_UNDO", which
isn't set by default for search buttons, but that gives us ugly names for
the undo steps, so an explicit push is better in this case.
Differential Revision: https://developer.blender.org/D11190
When activated in modal, `translate`, `resize`, `rotate`, `shear` and
`edge_rotate_normal` use a different orientation than the set in scene.
This orientation needed to match since some of these modes can be switched
during operation.
The default orientation for these modes was `V3D_ORIENT_VIEW`.
And this changed when finishing the `translate` and `resize` to
`V3D_ORIENT_GLOBAL`.
But this could cause inconsistencies when inputting values from the
keyboard.
The solution now is to change the orientation when you change the mode.
---
Note: Although the user can expect the value entered to reflect the
orientation set in the scene, it would require a lot of changes and would
not be really useful.
Use bone rotation order to compute the baked rotation. This fixes a bug
introduced in rB0e85d701c654, where the object rotation order was
applied to the bone.
Maniphest Tasks: T88359, T86193
Reviewed By: sybren, GuiltyGhost, #animation_rigging
Differential Revision: https://developer.blender.org/D11282
This node is similar to the Value and Vector node.
It just provides a way to use the same material in multiple nodes
without exposing it outside of a node group.
Differential Revision: https://developer.blender.org/D11305
This adds a new Material Assign node. It can be used to change the
material used by an existing mesh or to assign a material to a mesh
that has been generated from scratch.
Differential Revision: https://developer.blender.org/D11155
This fixes the `Apply Modifier` and `Visual Geometry to Mesh` operator
when a modifier changed materials on the evaluated geometry.
This is necessary since rB1a81d268a19f2f1402f408ad1dadf92c7a399607.
Differential Revision: https://developer.blender.org/D11303
The old geometry nodes evaluator was quite basic and missed many features.
It was useful to get the geometry nodes project started. However, nowadays
we run into its limitations from time to time.
The new evaluator is more complex, but comes with new capabilities.
The two most important capabilities are that it can now execute nodes in
parallel and it supports lazy evaluation.
The performance improvement by multi-threading depends a lot on the specific
node tree. In our demo files, the speedup is measurable but not huge. This
is mainly because they are bottlenecked by one or two nodes that have to be
executed one after the other (often the Boolean or Attribute Proximity nodes)
or because the bottleneck is multi-threaded already (often openvdb nodes).
Lazy evaluation of inputs is only supported by the Switch node for now.
Previously, geometry nodes would always compute both inputs and then just
discard the one that is not used. Now, only the input that is required
is computed.
For some more details read D11191, T87620 and the in-code documentation.
Differential Revision: https://developer.blender.org/D11191
This feature of `select_side_of_frame` was disabled by removing option
from operator property enum but functional code was never removed.
Add back option to use this feature.
Feature was disabled due to keymap issue. Currently this feature doesn't
have keymap assigned.
Due to misunderstanding of how strip duplication works, animation data
was duplicated on all strips when any strip was split.
`SEQ_sequence_base_dupli_recursive()` duplicated data on strip that was
being split, and `SEQ_ensure_unique_name()` duplicated animation on all
strips.
Only duplication should be done with `SEQ_ensure_unique_name()` and only
on right side split strips, because only these strips are duplicated.
Fix issue described in T87678, which was partially a bug and partially
change in intended(at least as far as I can tell) behaior.
Function `evaluate_seq_frame_gen` that was partially responsible for
filtering strips in stack for rendering wasn't working correctly.
Intended functionality seems to be removing all effect inputs from stack
as it is unlikely that user would want these to be blended in. However
there was logic to exclude effects placed into same input, which because
of weak implementation caused, that any effect input, that is effect as
well will be considered to be part of stack to be blended in.
This bug was apparently used to produce effects like glow over original
image.
Even though this is originally unintended, I have kept this logic, but
I have made it explicit.
Another change is request made in T87678 to make it possible to keep
effect inputs as part of stack when they are placed above the effect,
which would imply that blending is intended. This change is again
explicitly defined.
Whole implementation has been refactored, so logic is consolidated
and code should be as explicit as possible and more readable.
`must_render_strip function` may be still quite hard to read, not sure
if I can make it nicer.
Last change is for remove gaps feature code - it used same rendering
code, which may be reason why its logic was split in first place.
Now it uses sequencer iterator, which will definitely be faster than
original code, but I could have used `LISTBASE_FOREACH` in this case.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11301
Recently `SEQ_sort()` function was split so functionality is provided
on per-seqbase basis. After discussion about this split, it turned out,
that per-seqbase operation is only that should be provided, because
RNA API functions need to be able to access arbitrary seqbase
Remove recently introduced function `seq_sort_seqbase` and change
`SEQ_sort` function to operate on seqbase.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11297
After this commit, all geometry node "init" and "update" functions are
at the top of each file, right below the "layout" function. This means
you can always scroll to the bottom of the file to see the entry point,
and the boring boilerplate code is grouped in one section.
With this patch you will be able to add and remove attributes from curve
data inside of geometry nodes. The following is currently implemented:
* Adding attributes with any data type to splines or spline points.
* Support for working with multiple splines at the same time.
* Interaction with the three builtin point attributes.
* Resampling attributes in the resample node.
The following is not implemented in this patch:
* Joining attributes when joining splines with the join geometry node.
* Domain interpolation between spline and point domains.
* More efficient ways to call attribute operations once per spline.
Differential Revision: https://developer.blender.org/D11251
These seem to be causing some stability issues, and really are just not that
useful in practice. Compiling them is slow already, so it does not improve
the user experience much to show an AO preview if it's not nearly instant.
Textures may be important to be able to identify an object. They are also a way
to make many objects look more like when rendered with an advanced render
engine, without being that expensive.
So this seems like a simple way to increase usefulness of the automatic
previews.
While this function should (currently) not be called on linked ID, there
is no reason to treat those differently than local IDs, for the part
that they have in common: needs to be properly sorted.
`id_sort_by_name` would simply not deal properly with linked IDs, could
lead to mixing IDs from different libraries, and unsorted IDs within the
same library.
Note that while sorting of local IDs is fine, currently sorting of
linked IDs is a total unpredictable failure.
Next commit will fix this, ensuring that linked IDs are grouped by their
library, and properly name-sorted within this library group.
This patch turns off the creation of file thumbnails for files that are
offline and therefore not fully-present on the file system. These types
of files - typically cloud-based or stored on slower backup media -
only have their contents available when actually accessed, at which
point there will be a short delay. If we allow thumbnail creation in
this state then all offline files in a folder will be downloaded just
to view a listing, which can take a long time.
Files in this state will instead get a more generic thumbnail that
still indicates file type (icon in center) and that shows offline state
will a special icon at the bottom-left.
Although this currently only affects Windows users, most of this patch
is platform-agnostic. So other platforms inherit this behavior if they
only add FILE_ATTR_OFFLINE attribute to files in this state.
See D11101 for more information.
Differential Revision: https://developer.blender.org/D11101
Reviewed by Julian Eisel
Fix T88167.
Caused by {rB97defd9cd79b6e3ed0e52481a7078107dbe0522b}
`(BLI_rcti_isect_pt` used here to confirm if cursor position is in between active region boundary.
Subtracting min region boundary from the mouse position before the check, fails the condition.
`mval[2]` introduced to hold the region relative mouse position.
Reviewed By: Severin
Maniphest Tasks: T88167
Differential Revision: https://developer.blender.org/D11224
Changes output for geometry info node in Eevee to be consistent with Cycles (w/o osl)
Before this patch Eevee outputs Z-tangent even for hair. This patch changes it to output hair tangent (growth direction). Hair tangent is impossible to derive otherwise from normal or view direction.
Reviewed By: fclem, brecht
Differential Revision: https://developer.blender.org/D10841
This commit allows that the evaluated geometry of an object has
different materials from the original geometry. This is needed
for geometry nodes.
The main thing that changes for render engines and exporters
is that the number of material slots on an object and its geometry
might not match anymore. For original data, the slot counts are
still equal, but not for evaluated data.
Accessing material slots though rna stays the same. The behavior
adapts automatically depending on whether the object is evaluated.
When accessing materials of an object through `BKE_object_material_*`
one has to use a new api for evaluated objects:
`BKE_object_material_get_eval` and `BKE_object_material_count_eval`.
In the future, the different behavior might be hidden behind a more
general C api, but that would require quite a few more changes.
The ground truth for the number of materials is the number of materials
on the geometry now. This is important in the current design, because
Eevee needs to know the number of materials just based on the mesh in
`mesh_render_mat_len_get` and similar places.
In a few places I had to add a special case for mesh edit mode to get it
to work properly. This is unfortunate, but I don't see a way around that
for now.
Differential Revision: https://developer.blender.org/D11236
This is caused by lacking of consideration of
OB_DUPLICOLLECTION in updateDepsgraph() in the
modifier.
Reviewed by: Antonio Vazquez (antoniov)
https://developer.blender.org/D11292
Splitting of effect strip alone wasn't handled properly. Previously
this resulted in duplicating effect strip, and it was broken at least
from 2.79.
Change in rB8ec6b34b8eb2 was intended to allow splitting strips
individually, so it can be used as RNA API function but also so it
requires as little glue logic as possible.
This is fixed by splitting all dependent strips at once in 2 separate
ListBases for left and right strips. Strips can be finally moved into
original `ListBase`.
With this fix it is still possible to split strips individually with
little glue logic. RNA API function could return list of split strips
as well, currently at least one strip in chain will be provided so
chain can be reconstructed on python side.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10209
Python API function Sequence.move_to_meta() did delete effect chain
when strip with effects was moved.
Use iterator API to query effect strips and move whole chain to meta.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11206
Includes update for OpenVDB file IO, i.e. fixes an issue with
compression flag combination that resulted in random segfaults.
Other changes: Cleanup and formatting.
Read and write generated coordinates (also known as "original
coordinates", "reference coordinates", or "orcos") from and to Alembic.
A custom geometry property named "Pref" is used for (hopefully)
interoperability with Maya and Houdini. For now it's only guaranteed for
Blender-to-Blender.
Export: writing generated coordinates is optional (on by default).
Import: generated coordinates are always read whenever the reading of
vertex data is enabled.
Manifest Task: T88081
Copying an ID outside of BMain should not assume that the datablocks it
uses are now directly linked. This would be wrong e.g. in case that new
no-main ID is copied from a linked data-block and is supposed to remain
a linked data.
Value of the size argument in `strncat` is too large, might lead to a
buffer overflow.
Change the argument to be the free space in the destination buffer
minus the terminating null byte.
Introduced in 5368859a66
Reviewed By: Sergey
Differential Revision: https://developer.blender.org/D11289
The BlenderSync will do quite a bit of work on every sync_data() call
even if there is nothing changed in the scene. There will be early
outputs done deeper in the call graph, but this is not really enough to
ensure best performance during viewport navigation.
This change makes it so sync_data() is only used when dependency graph
has any update tags: if something changed in the scene the dependency
graph will know it. If nothing changed there will be no IDs tagged for an
update in the dependency graph.
There are two weak parts in the current change:
- With the persistent data there is a special call to ignore the check
of the dependency graph tags. This is more of a safety, because it is
not immediately clear what the correct state of recalc flags is.
- Deletion of objects is detected indirectly, via tags of scene and
collections.
It might not be bad for the first version of the change.
The test file used: {F10117322}
Simply open the file, start viewport render, and navigate the viewport.
On my computer this avoids 0.2sec spend on data_sync() on every
up[date of viewport navigation.
We can do way more granular updates in the future: for example, avoid
heavy objects sync when it is only camera object which changed. This
will need an extended support from the dependency graph API. Doing
nothing if nothing is changed is something we would want to do anyway.
Differential Revision: https://developer.blender.org/D11279
- Used try/except instead of a poll function.
- The error case referenced a non-existent error handling module.
Prefer poll functions over exception handling where possible,
also having an operators logic in a try block isn't good practice
as it can hide more serious errors in the code.
Note that duplicate pencil settings access should be moved into a
utility function. This can be part of a separate cleanup.
Resolve ownership ambiguity with shared physics pointers.
Previously, LIB_ID_CREATE_NO_MAIN allowed pointer sharing with
the source ID so physics caches can be shared between original and
evaluated data: (Object.soft.shared & Object.rigidbody_object.shared).
This only worked properly for LIB_TAG_COPIED_ON_WRITE ID's,
as LIB_TAG_NO_MAIN can be used in situations where the original ID's
lifetime limited by it's original data.
This commit adds `LIB_ID_COPY_SET_COPIED_ON_WRITE` so ID's only share
memory with original data for ID's evaluated in the depsgraph.
For all other uses, a full copy of physics data is made.
Ref D11228#287094
lookups
We use the schema so that we can access top level attributes as well.
This is already done for polygon meshes and curves, so this only
modifies the behavior for subdivision objects.
Expand is not expected to update the visibility state of the PBVH, only
the Face Sets IDs. If visibility updates are made accidentally, PBVH
rendering breaks.
In order for this to work properly, the following fixes are needed:
- Expand should always check for active component before attempting to
modify a Face Set ID
- Expand should always check the visibility state on original_face_sets, as
it is the array that contains the visiblilty state that corresponds with the
current state used for PBVH rendering. This implies that after any modification
done by Expand, the visibility state of ss->face_sets and
expand_cache->original_face_sets should match (like in any other tool that
does not modify visibility).
- Expand should never modify the Face Set ID of a poly that is hidden in
expand_cache->original_face_sets.
- When deleting an ID, hidden Face Sets should be skipped when picking IDs for
content filling. This avoids introducing hidden IDs back into the visible
geometry even after updating its visibility state.
Reviewed By: JulienKaspar, JacquesLucke
Maniphest Tasks: T88230
Differential Revision: https://developer.blender.org/D11243
Treat a missing <diffuse> the same as a black diffuse color.
The easiest way to see this bug is with a Collada shader like
```
<constant>
<emission>
<color sid="emission">1 0 0 1</color>
</emission>
</constant>
```
The Collada spec says this should be just
```
color = <emission>
```
ie. red everywhere. The importer slots the red into the Principled Emission socket, but since it leaves the Base Color as the default off-white, this is added to red, and the material looks white-pink in the light and red only in the shadows.
Putting black in the Base Color makes it look red everywhere.
D10939 will also eliminate the much-less-noticeable specular term for this case.
Reviewed By: gaiaclary
Differential Revision: https://developer.blender.org/D10941
Collada shaders with black <specular> should import with Specular=0.
(A missing <specular> is the same as black.)
The general specular conversion is hard, but this case is common and easy.
Fixes the specular for all <constant>/<lambert> shaders, and <blinn>/<phong>
shaders with black/omitted <specular>. Before this they all looked too "shiny".
Reviewed By: gaiaclary
Differential Revision: https://developer.blender.org/D10939
This is giving too bright pixel values, as the sample scaling and random number
sample are wrong. The proper fix for this is complicated. It will be solved in
Cycles X, for now we disable this combination.
Contributed by Intel. On some scenes like classroom with particular integrated
GPUs this speeds up rendering 1.97x. With other benchmarks and GPUs it's
between 0.99-1.14x.
Combining location, rotation and scale channels into a matrix is
a standard task, so while it is easily accomplished by constructing
and multiplying 3 matrices, having a standard utility allows for
more clear code.
The new constructor builds a 4x4 matrix from separate location,
rotation and scale values. Rotation can be represented as a 3x3
Matrix, Quaternion or Euler value, while the other two inputs
are vectors. Unneeded inputs can be replaced with None.
Differential Revision: https://developer.blender.org/D11264
No real functional changes.
When `i` is zero, `filelist_cache_previews_push` was called twice with
the same icon.
This caused the preview to be computed twice when only once is needed.
Before, the camera parameters were calculated only for first frame.
If the camera is animated, these values need to be recalculated in order to get the new camera view position and export the strokes as expected.
Also fixed the export of PDF when the view is not in camera view. PDF export, needs to be done in camera view.
This patch introduces non linear sliders. That means, that the movement
of the mouse doesn't map linearly to the value of the slider.
The following changes have been made.
- Free logarithmic sliders with maximum range of (`0 <= x < inf`)
- Logarithmic sliders with correct value indication bar.
- Free cubic sliders with maximum range of (`-inf < x < inf`)
- Cubic sliders with correct value indication bar.
Cubic mapping has been added as well, because it's used for brush sizes
in other applications (Krita for e.g.).
To make a slider have a different scale type use following line in RNA:
`RNA_def_property_ui_scale_type(prop, PROP_SCALE_LOGARITHMIC);`
or:
`RNA_def_property_ui_scale_type(prop, PROP_SCALE_CUBIC);`
Test the precision, step size and soft-min if you change the scale type
of a property as it will feel very different and may need tweaking.
Ref D9074
Since spline data is stored separately for each spline, the data often
needs to be flattened into a separate array. It's helpful to have the
necessarily-sequential part of that split off into a separate method.
I've found myself using functions like these in quite a few places.
Adds internal API for creating and managing OpenXR actions at the
GHOST and WM layers. Does not bring about any changes for users since
XR action functionality is not yet exposed in the Python API (will be
added in a subsequent patch).
OpenXR actions are a means to communicate with XR input devices and
can be used to retrieve button/pose states or apply haptic feedback.
Actions are bound to device inputs via a semantic path binding
(https://www.khronos.org/registry/OpenXR/specs/1.0/html/xrspec.html#semantic-path-interaction-profiles),
which serves as an XR version of keymaps.
Main features:
- Abstraction of OpenXR action management functions to GHOST-XR,
WM-XR APIs.
- New "xr_session_start_pre" callback for creating actions at
appropriate point in the XR session.
- Creation of name-identifiable action sets/actions.
- Binding of actions to controller inputs.
- Acquisition of controller button states.
- Acquisition of controller poses.
- Application of controller haptic feedback.
- Carefully designed error handling and useful error reporting
(e.g. action set/action name included in error message).
Reviewed By: Julian Eisel
Differential Revision: http://developer.blender.org/D10942
This was a bug uncovered by rB50782df42586.
Previously, the lightcache was always discarded between redraw and forced
to be updated again.
Now we check for update inside the render loop making it compatible with
accumulation motion blur and long exposure.
This was caused by the slight focus gather not being wide enough
for small radii. Now the cast to int will properly round the radius to
the nearest integer.
This is related to T86244 Black Artefacts in EEVEE on Transparent BSDF
This was caused by the bokeh LUT being sampled outside the valid range.
But `texelFetch` is only valid if the sample actually exists. This lead to
undefined behavior.
The fix is to increase `DOF_MAX_SLIGHT_FOCUS_RADIUS` (which just offsets the
LUT along the X=Y axis) to avoid any sample outside the defined range.
operator
This is only used when the preset is set to 'Custom', make that clear in
the tooltip and disable editing the value if another preset is used.
Issue came up in T88155.
Maniphest Tasks: T88155
Differential Revision: https://developer.blender.org/D11210
effect
The way it is now, `ClothVertex->mass` is setup once for the clothObject
and then reused if it already exists [so does not change across frames/
steps] which happens in`cloth_from_object` / `do_init_cloth`, where
`SIM_cloth_solver_init` / `SIM_mass_spring_set_vertex_mass` are called
and set up masses in `Implicit_Data`.
Seems possible to update `ClothVertex->mass` every step in
`do_step_cloth`, however it seems more involved to update the masses in
`Implicit_Data` there as well. The masses from `Implicit_Data` are
accessed in many places, so it would be mandatory to have these masses
kept up-to-date (and even then it is unclear if the solver was designed
to work with these animated or if there are assumptions about this being
stable across the sim).
So propose to remove the (broken/not implemented) animation capabilities
on the property instead.
Maniphest Tasks: T88188
Differential Revision: https://developer.blender.org/D11225
This code in the geometry set header was not directly related to
geometry sets, it makes more sense in the attribute access header.
This makes it clearer that code for geometry components uses attribute
code, rather than the other way around. It also allows adding more
functionality to `BKE_attribute_access.hh` that depends on these things
without including `BKE_geometry_set.hh` there.
The code incorrectly used the size of the second to last segment rather
than the last segment's size. That was a problem when the last segment
is a vector segment but the second to last isn't.
I also used the opportunity to slightly refactor the control point
offsets cache, making it one longer so it also contains information
about the size of the last segment, simplifying other code.
In {rB266cd7bb82ce}, support for muting links was added. It might be
debatable if we define a shader as "having" displacement even if the link
is muted, but after said commit, shader_has_displacement() would return
true but still leave the returned node as NULL.
Now also return false if the link is muted (otherwise the caller would
need to additionally check the returned node as well.)
Maniphest Tasks: T88234
Differential Revision: https://developer.blender.org/D11256
Now the operators work like other areas of Blender using the list of selected objects.
Also, the name has been changed to:
```Layers:
- Copy Layer to Selected
- Copy All Layers to Selected
Materials:
- Copy Material to Selected
- Copy All Materials to Selected```
Reviewed By: mendio, pablovazquez, pepeland
Differential Revision: https://developer.blender.org/D11216
This module exposes the platform utils defined in the GPU module in C.
This will be useful for porting existing code with `bgl` to `gpu`.
Reviewed By: fclem, brecht, campbellbarton
Maniphest Tasks: T80730
Part of D11147
This module exposes the capabilities defined in the GPU module in C.
This will be useful for porting existing code in `bgl` to `gpu`.
Reviewed By: fclem, brecht, campbellbarton
Maniphest Tasks: T80730
Part of D11147
Code would still create an object (without setting up materials), code
for removing unused material slots would then freeze.
Now return/cancel early in case of empty selection.
This came up in T88269 [which is still not fully fixed, transforming
curve edit points clear their GP_STROKE_SELECT flag which now results in
the early exit, should be looked at separately]
Maniphest Tasks: T88269
Differential Revision: https://developer.blender.org/D11252
The term direction was used in 3 different ways in screen editing code,
making it hard to follow:
- 0-3 for as magic numbers mapped to [west,north,east,south].
- `h`, `v` characters for [horizontal,vertical] axes.
- Cycle direction SPACE_CONTEXT_CYCLE_PREV, SPACE_CONTEXT_CYCLE_NEXT
The following changes have been made:
- Add `eScreenDir` for [west,north,east,south], use variable name `dir`.
- Add `eScreenAxis` for [horizontal,vertical] values, use variable name
`dir_axis`.
- Add `eScreenCycle` for existing enum `SPACE_CONTEXT_CYCLE_{PREV/NEXT}`.
- Add macros `SCREEN_DIR_IS_VERTICAL(dir)`,
`SCREEN_DIR_IS_HORIZONTAL(dir)`.
Replacing `ELEM(dir, 1, 3)`, `ELEM(dir, 0, 2)`.
- Move `ED_screen_draw_join_highlight`, `ED_screen_draw_split_preview`
to `screen_intern.h`.
Reviewed By: Severin
Ref D11245
This allows extra options (in-front and stroke order) to be shown when adding line art kind of grease pencil object.
Reviewed by: Antonio Vazquez (antoniov)
Diff: https://developer.blender.org/D11130
- Matches changes in Python 3.x dictionary methods.
- Iterating now raises a run-time error if the property-group changes
size during iteration.
- IDPropertyGroup.iteritems() has been removed.
- IDPropertyGroup View & Iterator types have been added.
- Some set functionality from dict_keys/values/items aren't yet
supported (isdisjoint method and boolean set style operations).
Proposed as part of T85675.
There is a new Texture data-block socket that we can use in Geometry
Nodes now. This commit replaces the texture property of a node and
gives it a texture input socket instead. That increases flexibility.
The texture socket still has some limitations that will be lifted in the
next couple of days (e.g. it's not supported by the switch node and
cannot be exposed the a modifier yet).
Differential Revision: https://developer.blender.org/D11222
This fixes a few "obvious" places where we do unnecessary updates.
Those special cases were added in the early days of geometry nodes
when many updates were missing and we tried to get it to work at all.
There is a fairly high risk that with this change some required updates
will be missing again. Those can be fixed when we find thme.
Some of the update issues might have been fixed by rB58818cba40794905f9323080e60884e090f2d388
and similar changes we added over time.
Differential Revision: https://developer.blender.org/D11238
Improve the "In Betweens" tools:
- Push Pose from Rest Pose
- Relax Pose to Rest Pose
- Push Pose from Breakdown
- Relax Pose to Breakdown
- Pose Breakdowner
These all now use the same new sliding tool:
- Actual visual indication of the blending/pushing percentage applied.
- Mouse wrapping to allow for extrapolation without having to worry
about the initial placement of the mouse. This also means these tools
are actually usable when chosen from the menu.
- Precision mode by holding {key Shift}.
- Snapping to 10% increments by holding {key Ctrl}.
- Overshoot protection; by default the tool doesn't allow overshoot
(lower than 0% or higher than 100%), and it can be enabled by pressing
{key E}.
- Bones are hidden while sliding, so the pose itself can be seen more
clearly. This can be toggled by pressing {key H} while using the tool.
Reviewed By: #animation_rigging, zeddb, sybren, #user_interface, brecht, Severin, looch
Maniphest Tasks: T81836
Differential Revision: https://developer.blender.org/D9054
Sculpting tools are designed to ignore hidden geometry and behave like
hidden geometry does not exist.
When getting the neighbors of a vertex, now this takes into account
hidden geometry to avoid returing neighbors which connected edge is not
visible. This should make corner cases of a lot of tools work properly,
especially when working in low poly meshes when is common to have a
single face loop hidden.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D11007
This issue originates from a missing BVH packing for visibility data
when it is modified.
To fix this, this adds update flags to the managers to carry the
modified visibility information from the Objects' modified flag to the
GeometryManager.
Another set of flags is added to determine which data need to be packed:
geometry, vertices, or visibility. Those flags are then used when
packing the primivites.
Reviewed By: brecht
Maniphest Tasks: T87929
Differential Revision: https://developer.blender.org/D11219
When using a tool that is not a brush, the previously used brush
preset will still be active in the tool settings, so the cursor will
draw its custom reviews.
This checks if the current active tool is a brush before drawing its
previews. If it is not a brush tools, it draws a default white cursor.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9418
This is very similar to rB5613c61275fe6 and rB0061150e4c90d, basically
just exposing a `VMutableArray` method to its generic counterpart. This
is quite important for curve point attributes to avoid a lookup for
every point when there are multiple splines.
An emission texture is currently connected to the Base Color socket. It should connect to the Emission socket, like a constant does.
Reviewed By: gaiaclary
Differential Revision: https://developer.blender.org/D10990
link->multi_input_socket_index, which is used to calculate the links
position on the multi-input socket, was not set.
Now it is set to the sockets current link count.
Review: Jacques Lucke (JacquesLucke)
Differential Revision: https://developer.blender.org/D11082
Heterogeneous lookup is useful when constructing a key in a
map/set is relatively expensive (e.g. `std::string`). When doing
lookups in the map/set, one usually does not want to construct
the type to avoid overhead. Instead, heterogeneous lookup
allows for using a different type (such as `StringRef`) as key.
This change makes it easier to implement heterogeneous
lookup for custom types. Before, one had to specialize
`blender::DefaultHash`. Now, one just has to implement
a `static uint64_t hash_as(value)` on the type itself.
One still has to provide the equality operator in addition
to the hash function of course.
Before, any usage of tbb wrappers used in modifier code would
just fall back to the non-threaded non-tbb version.
We ran into this issue a couple of times in patches.
Sometimes it is useful to find the key that compares equal
to a known key. Typically that happens when the key itself
has additional data attached that is not part of its hash.
Note that the returned key reference/pointer is const, because
the caller must not change the key in a way that changes its
hash or how it compares to other keys.
Unavailable sockets should generally be ignored during evaluation.
They mainly exist because we don't have a better mechanism to turn
some sockets on/off depending on node parameters.
Currently, it is still possible that a link connects an available with an
unavailable socket. This link is not displayed in the ui and should
generally be ignored.
Previously, multiple threads adding information to node ui storage
at the same time resulted in memory corruption. The lock prevents
that, but might potentially become a bottleneck in the future.
For now favour correctness over a potential performance bottleneck.
'Preferences' is the term used elsewhere in Blender so this commit makes
the option more consistent.
In the future, the "default" target could be changed to something more
descriptive.
The new "Close Area" operator can let any neighbor replace the area to
be closed. This patch improves the selection of the best, and most-
aligned, neighbor. It maximizes the ratio of the shared edge lengths,
rather than minimize the absolute amount of misalignment. This follows
our expectations closer because it takes into account the relative
sizes of the areas and their edges.
see D11143 for details and examples.
Differential Revision: https://developer.blender.org/D11143
Reviewed by Campbell Barton
When disk cache path is same as blend file path, with Unix-like systems
blend file can be overwritten by disk cache directory.
This was caused by `BLI_delete(path, false, true)` when path points to
file. On Windows this would result in error message and file would not
be deleted. On Linux, file is deleted and then overwritten with cache
directory.
To further minimize chance of removing blend file, append disk cache
path with `_seq_cache` suffix.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11217
Byte images used `ibuf->float_colorspace` as source colorspace.
This was oversight - `ibuf->rect_colorspace` should be used as source
colorspace.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11223
In e1f3996d74, logic for changing metastrip start and end frame based
on contained strips was removed. This was done intentionally and
incorrect functionality wasn't noticed as drawing code reflected
seemingly correct state.
Original code was mostly correct, because meta strip doesn't store its
internal start and end points. This code was restored with minor
modifications so function `SEQ_time_update_sequence()` is fully self
contained as it is used not only by transform operator.
In addition, drawing glitches that happen when meta content is outside
of meta boundaries were fixed. These glitches were not caused by
e1f3996d74.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11215
Not allowing external direct access to the vector of splines in the
curve will help for things like reallocating custom data when a spline
is added or removed.
* Set colors for the new texture and material sockets
* Material uses the same color used for shading icons
* Texture uses a plum color desaturated enough to not be confused with Vector's violet
* Image socket adjusted to be closer to Texture sockets but darker
* Integer socket toned down in saturation to not stand out so much
(and be closer to float sockets which are gray)
Making this change now during bcon1 to gather feedback from the community,
and because Geometry Nodes needs to use the new texture/material sockets.
This commit exposes the first spline control point attributes. The
implementation incorporates the attributes into the virtual array
system, providing efficient methods to flatten the data into a
contiguous array and to apply changes from a flattened array. This
is only part of the eventual goal, which includes changes to run
attribute nodes separately for each spline to completely avoid copying.
So far `tilt` and `radius`, the two generic attributes common to
all spline types, are implemented. The more complex `position`
attribute is also added. It requires some special handling for Bezier
splines, where the control point handles need to be moved along with
the control points. To make that work I also added automatic handle
recalculation to the Bezier spline.
Differential Revision: https://developer.blender.org/D11187
This was caused by the drivers not optimizing the shader enough to remove
the samplers and data used by closure eval. Removing the lighting loops
from the depth shader fixes the perf regression.
With Constrain to Image Bounds selected, UVs will be constrained to the
correct/closest UDIM if the image is tiled.
UVs will be constrained to the 0-1 UV space if the image is not tiled.
This will override the present behavior of always constraining selected
UVs to the 0-1 UV space (UDIM 1001).
Reviewed By: campbellbarton
Ref D11202
The sockets are not exposed in any nodes yet.
They work similar to the Object/Collection sockets, which also
just reference a data block.
This is part of D11222.
Was causing calculation issues later on in the kernel.
This change catches the most obvious case: missing attribute. The old
code was trying to set tangent to 0, but because it was transformed as
a normal it got converted to non-finite value. This change makes it so
that no transform is involved and 0 is written directly to the SVM
stack.
To cover all cases it will require using safe_normalize() in this node
and in the normal transform function. This is more involved change from
performance point of view, would be nice to verify whether we really want
to go this route.
I've left asserts in the BSDF allocation functions. Don't have strong
connection to them, but think they are handy and are not different from
having an assert in the path radiance checks.
Differential Revision: https://developer.blender.org/D11235
It is possible that BSDF allocation will advance pointer in the
allocation "pool" but will return null pointer if the weight is
too small.
One artist-measurable issue this change fixes is random issues
with denoising: normal pass for denoising could have accessed
non-initialized normal of a closure.
Differential Revision: https://developer.blender.org/D11230
When activated in modal, `translate`, `resize`, `rotate`, `shear` and
`edge_rotate_normal` use a different orientation than the set in scene.
This orientation needed to match since some of these modes can be switched
during operation.
The default orientation for these modes was `V3D_ORIENT_VIEW`.
And this changed when finishing the `translate` and `resize` to
`V3D_ORIENT_GLOBAL`.
But this could cause inconsistencies when inputting values from the
keyboard.
The solution now is to change the orientation when you change the mode.
---
Note: Although the user can expect the value entered to reflect the
orientation set in the scene, it would require a lot of changes and would
not be really useful.
Extracts `nlasnapshot_blend_get_inverted_upper_snapshot()` from
`BKE_animsys_nla_remap_keyframe_values()`
This introduces a new struct member:
`NlaEvalChannelSnapshot->remap_domain` and marks which values of
`blended_snapshot` are processed for remapping/used-for-inverting.
Effectively, it marks which values have successfully been remapped and
can be further used for remapping.
`nlasnapshot_blend_get_inverted_upper_snapshot()`:
output snapshot `r_upper_snapshot` has each channel's `remap_domain`
written to which effectively marks the successfully remapped values.
The only reason a value is not in the remap domain is if inversion
failed or it wasn't marked to be remapped.
`..get_inverted_upper_snapshot()` has a variant `nlasnapshot_blend()`
from {D10220}, but this patch doesn't depend on it at all. A third
variant will later be added `..get_inverted_lower_snapshot()`.
Altogether, these three functions allow solving for any of
(lower_snapshot, upper_snapshot, blended_snapshot) given the other two.
The function `..get_inverted_lower_snapshot()` will also similarly
process the remap domain of the blended and lower snapshot.
added assertions within `nlasnapshot_blend()` and
`..get_inverted_upper_snapshot()` to future proof branches dealing with
blendmode and mixmodes. (suggested by sybren)
No user functional changes
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D10222
This turns links red if no implicit conversion can be made between the
from socket and the to socket. For geometry nodes this happens with
object, geometry, collection, and string sockets that are connected to
a different type. The change is simply implementing a callback that is
already implemented for other node tree types.
Differential Revision: https://developer.blender.org/D11229
Add translation/rotation/scale parameters for custom bones shapes. The
new scale is a 3D vector `custom_shape_scale_xyz`, and replaces the
`custom_shape_scale` float.
Reviewed By: #animation_rigging, sybren, zeddb
Differential Revision: https://developer.blender.org/D10974
Previously we had a lot merge conflicts since we always put the most
recently added node at the bottom. By sorting the list we will have
one fewer merge conflict when a node is added in most cases.
The id-property iterator referenced a PyObject pointer without
increasing it's user count - allowing for errors if the value
goes out of scope during iteration.
Similar to how `GVArray_For_VArray` implements `materialize_impl` to
forward the work to its non-generic virtual array, we can do the same
thing for the mutable version, `GVMutableArray_For_VMutableArray`.
This commit should have no visible changes, since as far as I can tell
the only user of this class does not implement special materialize
methods anyway.
This enables the overlay for instanced geometry.
After this change, objects that are an instance of the current active
object (which are also being modified in the current active mode) won't
fade, which is different from the previous behavior.
Reviewed By: fclem
Maniphest Tasks: T82155
Differential Revision: https://developer.blender.org/D9362
When checking if the mesh has only one Face Set only the current active
component for expand needs to be checked. Otherwhise other components
that won't be modified by Expand that contain other IDs will be taken
into account, making the Face Set deletion go into an infinite loop.
Reviewed By: JacquesLucke
Maniphest Tasks: T88060
Differential Revision: https://developer.blender.org/D11169
Update the "current value" of the Shape Key blend amount when value is
not within the min/max range. New function `rna_ShapeKey_update_minmax`
used to update and clamp the current value.
Reviewed By: mano-wii, lichtwerk, #animation_rigging, sybren
Maniphest Tasks: T54339
Differential Revision: https://developer.blender.org/D11071
When a scene uses cryptomatte the viewport rendering would lead to a
memory leak. The reason was that all image renders (viewport+final)
activated cryptomatte. But is only used for final rendering.
This patch only activates cryptomatte when doing final rendering.
The Cycle-Aware Keying option was added in 2.8 and is used
to allow keyframing over cyclic F-Curves without disturbing
the cycle (e.g. overwriting an end keyframe updates both ends).
This effect is not limited to auto keyframing and is applied
to any key insertion, but when the popovers were rearranged
it was put in the Auto-Keyframing related one for some reason.
This is misleading, especially since because of that the
option is incorrectly greyed out when auto keyframing is
disabled, so move it to the generic Keyframing popover.
Differential Revision: https://developer.blender.org/D11213
Was giving a warning:
```
BKE_spline.hh:293:35: warning: 'interpolate_to_evaluated_points' overrides a
member function but is not marked 'override' [-Winconsistent-missing-override]
```
Mistake in {rBe48c4d73d378}.
Was using the vertex index as a lookup for the loop color (instead of
the loop index).
(Issue was not present in original D1429 btw).
Maniphest Tasks: T88145
Differential Revision: https://developer.blender.org/D11212
These variables and methods should make it easier to loop through buffers elements/pixels. They take into account single element buffers.
Single element buffers can be used for set operations to reduce memory usage.
Usage example: P2078
Reviewed By: #compositing, jbakker
Differential Revision: https://developer.blender.org/D11015
This allows extra options (in-front and stroke order) to be shown when adding line art kind of grease pencil object.
Reviewed by: Antonio Vazquez (antoniov)
Diff: https://developer.blender.org/D11130
The last point of the output was at the same location as the
first point of a cyclic spline. The fix is simple, just account for
the cyclic when choosing the sample edge length, and don't
hard code the last sample.
The spline `length` function assumed that the curve always had evaluated
edges. That is clearly false. This commit adds a check to `length` and a
special case for a single point in the curve resample node.
This commit uses two changes to improve the performance of the point
instance node.
**Prevent Reallocations**
At 64 bytes, the transform matrix for every instance is rather large,
so reallocating the vector as it grows can become a performance bottle-
neck. This commit reserves memory for the instances that will be added
to prevent unecessary reallocations as the instance vector grows.
In a test with 4 million instances of 3 objects in a collection, the
node was about 40% faster, from 370ms to 270ms for the node.
**Parallelization**
Currently the instances are added by appending to a vector. By changing
this slightly to fill indices instead, we can parallelize the operation
so that multiple threads can fill data at the same time. Tested on a
Ryzen 3700x, this reduced the runtime from the above 270ms to 44ms
average, bringing the total speedup to ~8x.
Note that displaying the instances in the viewport is still much slower
than the calculations in node, this change doesn't affect that.
This patch refactors the instance component to make use of the earlier
refactoring in rB4599cea15dcf. Now we don't have to build an array of
instance references the size of the point domain, and we can gather the
possible instances only once and use the same vector for all component
types. Generally the node should be a bit faster and use less memory.
The logic is moved around a bit, especially the hashing of the ID
attribute to pick from the instance list, but the result is unchanged.
Differential Revision: https://developer.blender.org/D11203
Those were mostly just left over from previous work on particle nodes.
They solved the problem of keeping a reference to an object over
multiple frames and in a cache. Currently, we do not have this problem
in geometry nodes, so we can also remove this layer of complexity
for now.
We need to always add a single point to the last cyclic segment that
completes the loop, because that includes the starting point of the
evaluated edge. The existing code forgot about that point.
This node generates a naturally parametarized (even length edge) poly
spline version of every spline in the input. There are two modes,
"Count", and "Length". These are similar to the same options for the
line primitive node in end points mode.
I implemented this instead of a "Sample Points" node, because for this
operation it's trivial to keep the result as a curve, which is nice
since it increases flexibility, and because it can make instancing
simpler, i.e. using the transforms of each evaluated point rather than
requiring the construction of a "rotation" attribute.
Differential Revision: https://developer.blender.org/D11173
Now it's possible to append materials of one grease pencil object into another one. The operator allows active material or all materials.
Also, the Layer Copy To Object has been renamed to Layer Append to Object to keep consistency and now allows to append all layers at once.
Small addition inspired by [this tweet](https://twitter.com/Vorundor/status/1390645286624763909) of a user in a situation I also saw myself in the past.
Showing "(Clipped)" next to the view name in the `Text Info` overlay fits well since it's a per-viewport setting.
{F10059921, size=full}
While on Local view:
{F10059925, size=full}
Multiple viewports:
{F10059946, size=full}
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D11193
Avoids having frames with the word "Frame" on top, resulting in less visual noise.
(users were working this around by adding a space as label name).
Differential Revision: D11193
There need to be more cleanup for ffmpeg 4.5 (ffmpeg master branch).
However this now compiles on ffmpeg 4.4 without and deprication
warnings.
Reviewed By: Sergey, Richard Antalik
Differential Revision: http://developer.blender.org/D10338
We were not assigning the amount of sound channels to the output frames.
Newer ffmpeg releases has sanity checks in place and doesn't fall back
to two channels anymore.
This adds `parallel_for` to the Attribute Curve Map node to improve performance.
Grain size set to 512.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D11194
this is a followup to rB2bd85d9cc623, we cannot forcefully delete
obsolete overrides of object data (meshes etc.), as this implies also
deleting their user object, which might still be a perfectly valid
override, albeit in conflict regarding its obdata ID pointer...
This is the opposite of previous code, which would keep those
'deprecated' overrides arround (often in a dedicated collection), when
they were detected as user-edited.
While this is a safe-ish way to (try to) preserve user-edited data, this
tends to add too much 'trash' data to production scenes, which cleaning
becomes a burden.
Note that user will get warnings in thos cases, and can always choose
not to save the current blend file and go fix the library issue instead.
Code detecting overrides which reference linked data is missing was
actually missing many cases, leading to too much garbage data being kept
around after resync process.
This iterator design provides means to create simple and flexible API
to query and work with collection of strips. It should be used in cases
when conditions require multiple stages of recursive iteration of all
strips or similar complex scenarios.
Quick API overview:
Basic queries are standalone functions that return SeqCollection
Use SEQ_collection_create() and SEQ_collection_free() to construct
such query functions.
Use these functions to get strips of known conditions, like selected
strips, movie strips, muted strips and so on.
Use SEQ_reference_query() when querying strips with relation to
some reference strip. For example to get its effects, strips that have
same type or use same input file and so on.
These aren't standalone functions because often you need to query strips
relative to each strip in collection.
Use SEQ_collection_expand() to query strips relative to each strip
in collection. These will be merged to original collection.
Use SEQ_collection_merge() to merge 2 collections
To iterate collection elements use macro SEQ_ITERATOR_FOREACH()
This API is quite specific, but I think it is best suited for tasks
that are usualy solved in sequencer codebase.
Old sequencer iterator has been completely removed.
SEQ_ALL_BEGIN and SEQ_ALL_END macros re-use new iterator design.
As initial use for this iterator select_grouped_effect_link()
function has been rewritten. It was not only broken, but also it used
DNA fields to aid iterating strips.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10337
Instead of only drawing images on first start, load them into cache.
This resolves a logical problem when images don't load fast enough,
where the animation would load some frames each time until all images
loaded into cache.
In practice this could play back with severe frame skipping many times
times before all images were loaded making playback smooth.
Part of a fix for T81751.
Originally colorspace of float images was converted using CPU.
GLSL will render images much faster.
Originally image was converted to `global_role_default_byte` space,
disregarding view transform and also display device, which now is
possible to specify. These parameters could be set via commandline to
settings used in Blender, however if they are to be set by users, these
needs to be sanitized.
Right now defaults are assumed for device given for
`COLOR_ROLE_DEFAULT_BYTE`. This should produce same behavior as
implemented before.
Together with D11167 animation player performance should be much better.
This code was mostly copy-pasted from sequencer.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11178
This node has the same functionality as the color and vector curve
mapping nodes in the shader editor. Here is works on every value for
the selected attribute, and it can also output a float value. Other
than that, the implementation is quite straightforward-- almost
completely boilerplate code.
Differential Revision: https://developer.blender.org/D10921
Mode switching passed through when the mode wasn't supported for all
modes except particle edit-mode.
Add a check to ED_object_mode_compat_test to prevent the error message.
The check to include particle edit mode in the object-mode drop-down
didn't match the poll function to edit particle edit mode.
Share the check between both functions.
This option should always be available. Even if it does not affect the
current object depending on its mode, it affects the rest of the geometry
of the scene.
The rest of the options also work this way. For example, a grease pencil
object does not have face orientation, but the ovelay option is still
there for the rest of the scene.
Reviewed By: JulienKaspar, HooglyBoogly
Maniphest Tasks: T83398
Differential Revision: https://developer.blender.org/D10215
Fix trying to use cross product on parallel vectors.
Fix intersection checks failing because we run into floating point
issues with very small numbers.
One of current annoying limitations of Blender re Collections/Objects is
that objects are forbidden to not be instantiated in at least one
collection.
Code ensuring that as a pst-processing step of override creation/resync
operations would be a bit too eager to add those objects to an external
'ad-hoc' collection, which poses several issues (both in term of keeping
the scene well organized, and related to override hierarchy handling).
So now be very conservative and only generate and use external 'storage'
collection for those objects when it is absolutely mandatory.
In pratice, it means this should never happen anymore on any decently
organized data source.
Caused by {rB0d9f79b163ee}.
IDP_SyncGroupTypes was now syncing from src to src (leading to
unexpected operator properties).
Assume this is rather critical, dont know the part of the code well, but
above commit clearly shows a change from 'dest->data.group' to 'src-
>data.group' which shouldnt be there.
Maniphest Tasks: T88030
Differential Revision: https://developer.blender.org/D11171
When the user hovered over a number input field, pressed Enter and then
typed in '0', confirming the input would always cancel the action. This
is because in this particular case `ui_textedit_begin` is called
instead of `ui_numedit_begin`. This function will not set
`data->startvalue` (leaving it at `0`) which will then trigger the
cancel in `ui_apply_but_NUM` which checks if the input changed (by
comparing the entered value with `data->startvalue`).
The fix makes sure that when `ui_textedit_begin` is called on a number
button, the `data->startvalue` is set correctly like in
`ui_numedit_begin`.
Breaking commit: rBSeb06ccc32462beaacbb114d6d0e450b6fc911047
Note: This also affects pressing tab to move to a new number field and
entering '0'. The fix will also cover this case.
Reviewed By: Severin, #user_interface
Maniphest Tasks: T88058
Differential Revision: https://developer.blender.org/D11168
Export UV maps to Alembic on every frame. This makes the export of UV
maps consistent with mesh normals. In the case of static UV maps it may
cause a slight slowdown (since they're exported on every frame now), but
due to the deduplication performed by the Alembic library, the resulting
files will be the same size anyway.
Thanks to @CodyWinch for providing the solution to the problem, and
writing the original patch D8397.
Differential Revision: https://developer.blender.org/D8397
The tooltips for the tracker buttons were all equal (because they all
use the same operator).
This adds the `get_description` operator callback to the
`CLIP_OT_track_markers` operator and returns a more descriptive
tooltip for the different buttons.
Reviewed By: mont29
Maniphest Tasks: T87983
Differential Revision: https://developer.blender.org/D11145
While rB6b18678e34bf did the correct updates, it did it a bit early (not
covering all possible node tree changes).
Now do the ntreeUpdateTree() at the very end of the material import
instead.
Thx @scurest investigating.
Maniphest Tasks: T86314
Differential Revision: https://developer.blender.org/D11159
`SEQ_recursive_apply` and `SEQ_seqbase_recursive_apply` were incorrectly
refactored into `iterator.c` file, but they aren't part and don't use
sequencer iterator.
Functions are moved to `utils.c` file.
Partial fix for T81751 which exposes multiple playback performance
issues. Previously the cache was limited to 30 frames, without a way to
increase the cache for smooth playback with files that are slow to load.
Now the animation plays back smoothly once loaded into cache.
The cache limit from the system preference is used
when the player is launched from Blender.
A new player argument `-c <cache_limit>` was added to support this.
The `file.execute` operator would early-exit because the mouse wasn't hovering
the file list. Caused by 4ba9d7d71e.
Although simpler solutions would have been possible, I decided it's better to
split add a new operator for executing based on the mouse (for double-clicking
files), to separate that from the window level execute operator
(`file.execute`). This allows more control and we can get rid of the implicit
assumption that the keymap would call `file.select` on mouse-press, and
`file.execute` on double-click, for the double-click behavior to work. The cost
is that we execute the file selection & activation logic twice on the
double-click, but that shouldn't be an issue at all.
Also removes the `need_active` property from the `file.execute` operator.
That's ancient and wasn't implemented well anyway.
To be clear, reason this fixes the bug is that `file.execute` works entirely
with the `execute()` callback now and doesn't early-exit based on the mouse
position anymore.
Might trigger warnings about the `need_active` property not being found for
custom keymaps. These can be ignored and the property can safely be removed
from the keymap. I don't expect other keymap breakages.
This was caused by the SSR option resetting the accumulation. But the
render passes were only cleared in the init phase. This means that
when SSR was resetting the `taa_render_sample` the actual renderpasses
would still contains 1 sample. This means the renderpasses were always
divided by the wrong number of samples.
The fix is to clear just before accumulation if the sample is 1.
The fact that it works for motion blur is kind of a blessing. This is because
we check `stl->effects->ssr_was_valid_double_buffer` before resetting the
sampling. So this only happens on the first motion step and does not affect
the rest of the rendering.
Differential Revision: https://developer.blender.org/D11033
This artifact was already present in previous version but was hidden
by the faulty SSS scale.
The issue comes from the translucence using the geometric normal
(computed using fragment shader derivative) leading to poor precision at
depth discontinuity.
Replacing using the same geometric normal reconstruction as the ambient
occlusion pass removes most of the issue.
This was caused by the SSR option resetting the accumulation. But the
render passes were only cleared in the init phase. This means that
when SSR was resetting the taa_render_sample the actual renderpasses
would still contains 1 sample. This means the renderpasses were always
divided by the wrong number of samples.
The fix is to clear just before accumulation if the sample is 1.
The fact that it works for motion blur is kind of a blessing. This is
because we check stl->effects->ssr_was_valid_double_buffer before
resetting the sampling. So this only happens on the first motion step
and does not affect the rest of the rendering.
Reviewed by: jbakker
Differential Revision: https://developer.blender.org/D11033
The render session is keeping track of the scene update, which includes
kernel loading time.
This fixes negative render times reported when CUDA kernels are compiled
at runtime.
A bit fragile logic, can be re-implemented using some user-counted
scope utility classes, so that only outer-most time skip is applied.
Not all python-defined ID properties are overridable (yet), this needs
to be detected by libquery 'foreach id' code, such that those ID
pointers can be ignored by override code when working on override
hierarchies.
Fixes part of the issues found while investigating studio files (namely,
some py-defined ID pointer properties from rigify that are not currently
overridable would cause issues and false detections during resync).
Move the detection/decision of whether an ID pointer should be taken
into account in library override hierarchy processing to the LibQuery
area of code, by introducing a new callback flag.
This allows to factorize the test logic, be explicit in liboverride code
about ID relationships that can be ignored when exploring the override
hierarchy, and adds the possibility to do more checks about pointers to
be tagged as non-overridable in the future.
Note that all but the 'special' ID pointers (loop-back, embedded, etc.)
should be overridable. If some is not, relevant IDType 'foreach_id'
callback code is reponsible to tag it properly.
Python-defined IDProperties however are not systematicaly overridable
(yet), so this should allow us to detect that case and act accordingly
in an incomming commit.
No behavioral change expected in this commit.
Each frame display would add an item to the cache limiting list
without checking if it was already in the list.
Limiting would then free image buffers when the length of the list
exceeded USE_FRAME_CACHE_LIMIT (currently 30).
In practice this meant short animations would free and reload
frames during playback.
In some cases, users start video editing work from General template,
where Filmic view transform is chosen by default. Currently, this causes
issue when working with sRGB footage, which are not properly decoded
into linear working space and final render looks miscolored.
When adding first strip, check it's colorspace and if it corresponds to
colorspace for byte images, ensure that view transform is set to
default value, which is Standard.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D11151
Match the output to the prefilled bug report script's output.
Make the output file self-contained.
Reviewed By: lichtwerk
Differential Revision: https://developer.blender.org/D11144
This patch makes the spline tilts (interpolated to the evaluated points)
affect the evaluated normals, allowing manual control of the rotation of
each profile in the curve to mesh node.
The method is based on Animation Nodes code, which keeps the data in
direction vector form, and rotates around the tangent vector.
Differential Revision: https://developer.blender.org/D11152
While the method of interpolating based on the curve length at each
evaluated point may be useful in some situations, for now it's best to
be consistent with the existing methods in Blender, so this commit adds
a simple linear-based-on-resolution sampling method to bezier splines.
The special case for the interpolation to the last point was being used
for every point in the last segment, because of the rounding. Instead,
make the function slightly more complicated to properly handle the
correct interolation in the cyclic and non-cyclic cases.
Some discard of vertbuf were not correctly followed by discards of
the GPUBatches that were using them. This lead to a use-after-free
situation where GPUBatches would reuse old VBO information. This did
not crash immediatly because the VBO indices were cached by our VAO
caching system. It kept working on some implementation because VBO
reference in the VAO (probably) preventing the VBO from being freed
by reference counting.
This fixes T85977 NVidia: Random crashes in 'DrvPresentBuffers'
The little chevron tab to open a hidden region wouldn't show up in the
Spreadsheet editor. Cause was an incorrect GPU-scissor usage:
While drawing regions, the scissors should be kept enabled, just the
scissor rectangle should be updated - and afterwards reset to what it
was before.
The little chevron tab to open a hidden region wouldn't show up in the
Spreadsheet editor. Cause was an incorrect GPU-scissor usage:
While drawing regions, the scissors should be kept enabled, just the
scissor rectangle should be updated - and afterwards reset to what it
was before.
Reports would change the active emboss of the Block, to make some of its
buttons appear without background. But it didn't reset it so that
buttons added afterwards wouldn't use the correct embossing.
Internally, when using Fill brush a dilate of the filled area was done, but this was hardcoded to 1 pixel.
In some situations, this was not enough, so now the value is accesible in the UI and can be set with different values.
Also, as this value is more used than `Leak Size`, the new Dilate is on Topbar, and Leak Size has been moved to Advanced panel.
In my previous patch https://developer.blender.org/D10171 some code changing the direction the strokes normal was accidentally included. This patch reverts that back to the original normal calculation.
Reviewed By: #grease_pencil, antoniov
Differential Revision: https://developer.blender.org/D11148
Mark NLA/FCurve modifier properties as library-overridable.
It was already allowed to add such modifiers to a library-overridden
object, but then the properties of those modifiers were read-only,
limiting their use.
After copying NLA tracks from one `AnimData` to another, also ensure
that the `AnimData::act_track` and `AnimData::actstrip` pointers are
pointing to the copy rather than the original.
This is a necessary step to allow library overrides on NLA modifiers
without crashing Blender.
The remapping of the pointers is done by looping over the tracks/strips
and comparing pointers. Alternatively, I could update the copy functions
themselves to keep track of those pointers and return them, but IMO that
would produce more spaghetti (they're also used in cases where this
pointer-remapping is not desired).
All changes:
* Include `file.pack_libraries` and `file.unpack_libraries` to the menu
[1].
* Rename "Pack Blender Libraries" → "Pack Linked Libraries" [2].
* Rename "Unpack Blender Libraries" → "Unpack Linked Libraries" [2].
* Rename "Pack All Into .blend" → "Pack Resources" [3]
* Rename "Unpack All Into Files" → "Unpack Resources" [3]
* Rename "☑ Automatically Pack Into .blend" → "☑ Automatically Pack
Resources" [3]
* Rename "Make All Paths Relative" → "Make Paths Relative" [4]
* Rename "Make All Paths Absolute" → "Make Paths Absolute" [4]
* Add separators accordingly
---
[1] - This was never exposed since its original commit rB16411da41e40.
Now that operator not listed in menus don't
show up in the search, this became even more hidden.
[2] - The original name (Pack Blender Library) was not clear enough.
Pose Libraries and Asset Libraries are also technically Blender
libraries.
[3] - The term All was misleading since it didn't include the Linked
Libraries.
[4] - No need to use "All". It is not used in the Report/Find Missing
Files either.
This commit put this in the File > External Data menu.
Differential Revision: https://developer.blender.org/D11109
Text data block were not considered special in the recursive purge
function. So they would get deleted if they had no actual users.
To fix this we instead make text data block use "fake user" so that
addon authors can specify script files that should be removed if nothing
is using it anymore.
Per default, new text object have "fake user" set. So functionality
wise, the user has to explicitly specify that they want the text object
to be purge-able.
Reviewed By: Bastien
Differential Revision: http://developer.blender.org/D10983
Text data block were not considered special in the recursive purge
function. So they would get deleted if they had no actual users.
To fix this we instead make text data block use "fake user" so that
addon authors can specify script files that should be removed if nothing
is using it anymore.
Per default, new text object have "fake user" set. So functionality
wise, the user has to explicitly specify that they want the text object
to be purge-able.
Reviewed By: Bastien
Differential Revision: http://developer.blender.org/D10983
The main goal of this refactor is to not store Object/Collection
pointers for every individual instance. Instead instances now
store a handle for the referenced data. The actual Object/Collection
pointers are stored in a new `InstanceReference` class.
This refactor also allows for some better optimizations further down
the line, because one does not have to search through all instances
anymore to find what data is instanced.
Furthermore, this refactor makes it easier to support instancing
`GeometrySet` or any other data that has to be owned by the
`InstancesComponent`.
Differential Revision: https://developer.blender.org/D11125
This patch adds initial curve support to geometry nodes. Currently
there is only one node available, the "Curve to Mesh" node, T87428.
However, the aim of the changes here is larger than just supporting
curve data in nodes-- it also uses the opportunity to add better spline
data structures, intended to replace the existing curve evaluation code.
The curve code in Blender is quite old, and it's generally regarded as
some of the messiest, hardest-to-understand code as well. The classes
in `BKE_spline.hh` aim to be faster, more extensible, and much more
easily understandable. Further explanation can be found in comments in
that file.
Initial builtin spline attributes are supported-- reading and writing
from the `cyclic` and `resolution` attributes works with any of the
attribute nodes. Also, only Z-up normal calculation is implemented
at the moment, and tilts do not apply yet.
**Limitations**
- For now, you must bring curves into the node tree with an "Object
Info" node. Changes to the curve modifier stack will come later.
- Converting to a mesh is necessary to visualize the curve data.
Further progress can be tracked in: T87245
Higher level design document: https://wiki.blender.org/wiki/Modules/Physics_Nodes/Projects/EverythingNodes/CurveNodes
Differential Revision: https://developer.blender.org/D11091
There was a function to set 2 pixels wide for inverse filling, but this must not be done in the borders of the image.
Now, the borders are checked before set 2 pixels.
Reported for ops.transform.vertex_warp and ops.transform.vertex_random.
Polling will check with ED_transverts_check_obedit, if we know it will
fail e.g. for pose mode, we can do the same check in the UI already.
Maniphest Tasks: T87926
Differential Revision: https://developer.blender.org/D11128
Using scene frame 1 is not reliable in cases when there is a
frame offset is involved. Using frame 1 seems more reliable,
although might still fail under certain circumstances.
More reliable fix would require a deeper change in the data
structure and the logic about frame loading and size detection.
The issue was caused by frame start/offset change triggering clip
reload, which was happening with a hardcoded scene frame index of 1,
which could be outside of the actual clip frames.
Solved by removing source change tag from the frame start/offset
update. The source doesn't really change: the resolution will stay
the same, as well as media type, its duration. So the tag was not
needed.
This precomputes vertex normals in the procedural and caches them in case none
are found in the archive. This only applies to polygon meshes, as subdivision
meshes are yet to be subdivided, so it is useless to do this computation.
The goal here is to speed up data updates between frames, as computing normals
shows up in profiles even for large objects. This saves around 16% of update time
for a production file.
This splits the data reading logic from the AlembicObject class and moves it to
separate files to better enforce a separation of concern. The goal was to simplify
and improve the logic to read data from an Alembic archive.
Since the procedural loads data for the entire animation, this requires looping
over the frame range and looking up data for each frame. Previously those loops
would be duplicated over the entire code causing divergences in how we might
skip or deduplicate data across frames (if only some data change over time and
not other on the same object, e.g. vertices and triangles might not have the
same animation times), and therefore, bugs.
Now, we only use a single function with callback to loop over the geometry data
for each requested frame, and another one to loop over attributes. Given how
attributes are accessed it is a bit tricky to simplify further and only use a
ingle function, however, this is left as a further improvement as it is not
impossible.
To read the data, we now use a set of structures to hold which data to read.
Those structures might seem redundant with the Alembic schemas as they are
somewhat a copy of the schemas' structures, however they will allow us in the
long run to treat the data of one object type as the data of another object
type (e.g. to ignore subdivision, or only loading the vertices as point clouds).
For attributes, this new system allows us to read arbitrary attributes, although
with some limitations still:
* only subdivision and polygon meshes are supported due to lack of examples for
curve data;
* some data types might be missing: we support float, float2, float3, booleans,
normals, uvs, rgb, and rbga at the moment, other types can be trivially added
* some attribute scopes (or domains) are not handled, again, due to lack of example
files
* color types are always interpreted as vertex colors
Workaround for crash when accessing FaceMaps / PaintMask data in
editmode, just disallow access in editmode as is done with UVs.
Same fix as in {rB3e2619b3e72a}.
Maniphest Tasks: T87969
Differential Revision: https://developer.blender.org/D11146
Initial report was mentioning the Classroom demo scene, but this is
probably because the scene was pre-configured to be used with OpenCL.
Would expect any OpenCL compositing to be failing prior to this fix.
The reason why crash was happening is due to OpenCL queue being
released from OpenCLDevice destructor. Is not that obvious, but
when Vector (including std::vector) is holding elements by value
a destructor will be called on "old" memory when vector capacitance
changes.
Solved by making forbidding copy semantic for compositor devices and
forcing move semantic to be used.
Also use emplace semantic in the devices vector initialization.
This commit significantly speeds up many of the attribute nodes when
multiple threads are available in linear situations when parallelism
cannot be achieved elsewhere.
See the differential for a table of timing comparisons tested on a
Ryzen 3700x. For an attribute with 4 million elements, the nodes were
about 3 to 9 times faster.
The changes are not exhaustive, other nodes could still be parallelized
in the future. Also, it would be possible to further optimize the grain
size in `parallel_for`, but I'd rather make sure it isn't too small.
I tested some different values, but also relied on intuition--
increasing grain size for less complex operations and vice versa.
Differential Revision: https://developer.blender.org/D11139
Currently overriding properties within material node trees is not
supported. However there is a workaround that allows feeding values
through drivers via an intermediate custom property, as described
in T82404. The workaround relies on the behavior of the ID copying
code that always patches datablock self-references even without any
overrides.
Unfortunately, this broke during development of 2.93. This happened
because a call RNA_struct_override_matches added in rB2281db72b0157
detects that no override exists, and 'restores' the self-reference
to point to the original datablock.
To avoid this, mark the Material.node_tree property with the
PROPOVERRIDE_IGNORE flag to stop RNA_struct_override_matches
from recursing into the currently unsupported node tree sub-block.
This flag should be removed when this is properly supported.
This was confirmed to fix the workaround and discussed with @mont29.
Shaders are only compiled if they are used by some other Node (Geometry, Light, etc.).
This usage detection is done before updating the Scene, however it fails at detecting
Shaders used by Procedurals not known to Cycles (e.g. ones defined by third party
applications), as Procedurals are only updated after the shaders are compiled.
To remedy this, we now use the Node reference counting mechanism to detect whether a
Shader is used and therefore should be compiled.
This removes `ShaderManager::update_shaders_used` as it is not needed anymore, however,
since it would also update the Shader ids, this is now performed in
`ShaderManager::device_update`, and a new virtual `device_update_specific` method was
added to handle device updates for SVM and OSL.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D10965
This adds a reference count to Nodes which is incremented or decremented
whenever they are added to or removed from a socket, which will help us
track used Nodes throughout the scene graph generically without having to
add an explicit count or flag on specific Node types. This is especially
useful to track Nodes defined through Procedurals out of Cycles' control.
This also modifies the order in which nodes are deleted to ensure that
upon deletion, a Node does not attempt to decrement the reference
count of another Node which was already freed or deleted.
This is not currently used, but will be in the next commit.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D10965
There was a quadratic algorithm extracting triangles from a coplanar
cluster. This is now linear.
Also found and fixed a bug in the same area related to the triangulator
added recently: it didn't get the right correspondence between new
edges and original edges.
Previously the option in the camera's //Object Data Properties > Viewport Display
> Sensor// would not display the sensor in camera view. This seemed to be caused
by the theme color `TH_VIEW_OVERLAY` having zero set for the alpha channel and
alpha blending being active, resulting in no visible output. Hence
`immUniformThemeColorShade(TH_VIEW_OVERLAY, 100);` is replaced with
`immUniformThemeColorShadeAlpha(TH_VIEW_OVERLAY, 100, 255);`.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11075
Object orientation for thumbnail creation changed to be slightly
oblique (tilted to one side and from above) to better show shape,
especially when axis-aligned. Camera lens changed to 85 to avoid
distortion of close objects like human heads.
see D9940 for details and examples.
Differential Revision: https://developer.blender.org/D9940
Reviewed by Julian Eisel
When saving a file in Edit mode with Multiframe enabled, the render did not include the modifiers.
Now the multiframe is not enabled if it's doing a render.
Resolves occasional glitch/flicker drawing dark buttons in the UI.
Regression in 405a5d3bd7
which removed shader unbinding when the batch is drawn.
GPU_shader_bind could run with the sRGB uniform in an unexpected state.
Reviewed By: fclem
Ref D11124
Multi-overrides of a same linked ID in a same override hierarchy are
currently not supported and can cause all kind of issues.
In some cases they could lead to infinite loop trying to resync the same
ID over and over, this is now prevented.
Found in some Blender studio production files.
Keep track of clog_refs so we can null the pointers when calling
CLG_exit. Otherwise we will run into issues where the code will try to
access freed data.
While it was technically safe to call Map.remove while iterating over
a map, it wasn't really designed to work. Also it wasn't very efficient,
because to remove the element, the map would have to search it
again. Now it is possible to remove an element given an iterator
into the map. It is safe to remove the element while iterating over
the map. Obviously, the removed element must not be accessed
anymore after it has been removed.
This commit adds a new API tha allow to replace the bgl API in the exemples on:
https://docs.blender.org/api/current/gpu.html
**Overview (New API):**
```
gpu.state: active_framebuffer_get
GPUFramebuffer: read_color
GPUOffscreen: texture_color
```
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D11031
Instead of creating different python wrappers for the same GPU object,
return the same `PyObject` created earlier.
This also allows for more secure access to existing GPU objects.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D11044
The formula used to compute the bend did subtraction of two big numbers
to get the position. Changed to find the delta and add that,
by rearranging the formula into a more numerically stable form.
Reviewed By: mano-wii, campbellbarton
Ref D11074
Currently there is an "Auto" option for the domain, this commit adds a
similar option for "Auto" data type, that uses the data type from the
target attribute or the source attribute (in that order).
Ref T87347
Differential Revision: https://developer.blender.org/D10932
Rename BKE_object_runtime_free -> BKE_object_runtime_free_data,
since the runtime pointer is part of the object, only the data is freed.
Leave the data cleared to avoid accidental use,
this is in keeping with other `*_free_data()` functions.
None of these generic poll functions had NULL pointer checks,
since all operators that use these functions expect a valid constraint,
modifier .. etc. Add the NULL check to the poll function.
Ref D11126
Reviewed By: mont29, Severin
If no other object was selected while dragging one in (e.g. from the Outliner
or an object asset from the Asset Browser), all visible objects in the active
view layer would get selected.
Issue was caused by a wrong enum type use.
Mistake in bcdba7c34d.
This adds two new methods:
* `clear` just removes all keys from the vector set.
* `index_of_or_add` returns the index of a key and adds it if has not
been added before.
While fa7ddd0f43 fixed the reported issue,
the possibility of reusing runtime data during curve-to-mesh conversion
remained. Instead of treating the bounding-box as a special case,
clear all run-time data for temporary objects.
Ref D11026
Reviewed By: sergey
The term `verify` doesn't fit with what this function does
and is sometimes used to check data is valid or to control validity
checking as with `RNA_define_verify_sdna`.
use more common term `ensure`.
This adds a callback to bNodeTreeType to check which socket types are
valid for the tree type. Function has been implemented for the normal
tree types, and can be implemented for custom node trees with python,
by adding a `classmethod` to the tree. However, only builtin socket
types are supported.
This is relevant for T87049, but it also has the advantage that it is
now clear which node trees support which sockets. Previously this
was assumed to be known by all developers.
Differential Revision: https://developer.blender.org/D10938
This is just linear interpolation, but it's nice to have an equivalent
to `mix3` for only two values. It will be used for interpolation of
values between bezier spline control points.
Currently when you try to convert a Text-object to Grease pencil from the Object-menu or via the operator in some other way, the Text-object is only converted to a Curve.
This commit converts that curve to a Grease pencil object.
Differential Revision: https://developer.blender.org/D11117
BMesh intersect could leave invalid items in the selection list,
causing a crash. The list is now cleared since boolean is such a
destructive operation, it's unlikely the selection order would be useful.
Thanks to @lukastoenne for finding the root cause.
This patch adds a threshold value to the glow effect in color mode.
Currently, the threshold is hardcoded to 5%.
You can select a color and specify a higher threshold to include
similar colors in the effect.
Note: depends on D10670
Reviewed By: #grease_pencil, pepeland
Differential Revision: https://developer.blender.org/D10672
This patch adds the Randomize options that exist in the Array modifier to the offset modifier.
Currently the patch uses
```
BLI_findindex(&gpf->strokes, gps);
```
to get the index of the current stroke for making each stroke a different seed value. This is how the noise modifier also gets the stroke seed value and it is noted there as well that this method is slow, and should be fixed in the future with another method of getting the stroke index.
Other methods were explored such as using the total number of points of the stroke, but that makes the randomize options incompatible with other modifiers before it such as Multiple Strokes, Array, Build, and Simplify.
{F9591325}
Differential Revision: https://developer.blender.org/D10171
Creating a shallow copy is sometimes useful to get a unique ptr
for a virtual array when one only has a reference. It shouldn't
be used usually, but sometimes its the fastest way to do correct
ownership handling.
When renaming a data-block that is an asset, while the asset is visible in the
Asset Browser ("Current File" asset library), the list wouldn't re-sort items,
breaking the alphabetical sorting.
This was easily possible while changing the data-block name throught the Asset
Browser's sidebar, while in the "Current File" asset library.
Sometimes functions expect a span instead of a virtual array.
If the virtual array is a span internally already, great. But if it is
not (e.g. the position attribute on a mesh), the elements have
to be copied over to a span.
This patch makes the copying process more efficient by giving
the compiler more opportunity for optimization.
FLT_EPSILON was added to the threshold when comparing values,
this caused problems selecting similar small faces since the areas
can be very small in this case.
Also increase the displayed precision so it's easier to use
smaller numbers.
- Allow long enums to break early
- Allow long titles to wrap
- Colloapse hlist to few collumns if needed
This fixes a few of the bigger issues, some more tweaks are still needed
in some places
Instead to create only the Blank object, now a new Layer and a simple material is added.
This is a common request of artists.
Reviewed By: mendio, pepeland
Differential Revision: https://developer.blender.org/D11110
The algorithm that calcualted the direction (inside/outside) of the
polyline was not always returing the correct result. This mean that the
polyline was filled "inside-out".
The fix uses the winding number to calculate the inside and outside.
Reviewed By: antoniov, pepeland
Maniphest Tasks: T87718
Differential Revision: https://developer.blender.org/D11054
In some cases functions were defined with arguments of different array
lengths in headers vs. implementations. This commit fixes some of the
cases I ran into, but probably not all of them.
Issue was caused by anim handle being reset by
`DEG_evaluate_on_framechange()`
Preserve anim handle by backing it up in
`blender::deg::SequenceBackup`
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11059
When frame is rendered to file, bilinear interpolation on scaled images
caused blurred edges.
This is fixed by not doing interpolation with pixels outside of source
buffer.
Such fix doesn't cover cropped images which are currently cropped by
filling area of image with black transparent color, because image buffer
has bigger size than visible image area.
This is fixed by offsetting range used in previous fix by amount, that
would correspond to crop distance. Because of this, image area doesn't
even need to be filled with transparency.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11058
This patch allows you to dynamically control stroke's opacity and thickness using an object for distance reference in the modifier. Fading range is adjustable, and it is compatible with current curve/vertex group selection.
Reviewed By: #grease_pencil, antoniov, mendio
Maniphest Tasks: T82177, T80194
Differential Revision: https://developer.blender.org/D9091
When an aligned (or auto) handle was snapped with only the control
point selected, it would not snap to the correct point, but offset. This
was because the handles were not considered selected. The `TD_SELECTED`
flag was not being set.
The fix makes sure that we include the handles in the selection when
the handle is aligned or auto.
Reviewed By: antoniov
Maniphest Tasks: T86881
Differential Revision: https://developer.blender.org/D11111
Fix for the Arc commands (A/a) to successfully parse the 4th and 5th arguments.
Fix for floats without a specified integer part, like `.123`
File for testing:
{F10042021}
Reviewed By: filedescriptor
Differential Revision: https://developer.blender.org/D11099
This was caused by the new depsgraph persistence.
The GPUbatches we got from the cache being the same for each frame
means that we need to be more careful about cleanning the additional
VBOs references.
Moving the `EEVEE_motion_blur_swap_data` function call at the end of
the loop makes sure the references are cleaned.
Mostly the interesting information about the instances IDs whether they
are -1 or not, but it's still worth displaying them in the editor.
In the future when we can hide or show colums, we could decide to hide
this one by default.
Differential Revision: https://developer.blender.org/D11104
WorkScheduler task model deletes work packages after executing them. The other models don't do so. All models should handle packages the same way.
Reviewed By: #compositing, jbakker
Differential Revision: https://developer.blender.org/D11102
WorkScheduler task model deletes work packages after executing them. The other models don't do so. All models should handle packages the same way.
Reviewed By: #compositing, jbakker
Differential Revision: https://developer.blender.org/D11102
Face set visibility is already flushed to all mesh elements in the right
way in SCULPT_visibility_sync_all_face_sets_to_vertices, calling
BKE_mesh_flush_hidden_from_verts is legacy code from the previous
visibility system that was causing the vertex visibility to take
priority over face sets. When hidding a single loop, all vertices of
those faces are still visibile, so this line was tagging all loop faces
visible. This was leaving mesh/face set visibiltiy in an unconsistent
state.
Reviewed By: JacquesLucke
Maniphest Tasks: T87474
Differential Revision: https://developer.blender.org/D11008
These settings are used though for these strokes (see
'paint_stroke_use_dash'), should be visible in the UI as well.
This was correctly added when dashing was introduced in rB15f82278d5d4
btw., but then messed up in rBfb74dcc5d69d.
Maniphest Tasks: T87816
Differential Revision: https://developer.blender.org/D11096
These settings are used though for these strokes (see
'paint_stroke_use_dash'), should be visible in the UI as well.
This was correctly added when dashing was introduced in rB15f82278d5d4
btw., but then messed up in rBfb74dcc5d69d.
Maniphest Tasks: T87816
Differential Revision: https://developer.blender.org/D11096
This was just not implemented for curve strokes when world spacing was
introduced in rB87cafe92ce2f.
Now do the equivalent of what was done in said commit in
'paint_space_stroke', now in 'paint_line_strokes_spacing' as well.
Maniphest Tasks: T87815
Differential Revision: https://developer.blender.org/D11098
This is a first step towards T87620.
It should not have any functional changes.
Goals of this refactor:
* Move the evaluator out of `MOD_nodes.cc`. That makes it easier to
improve it in isolation.
* Extract core input/out parameter management out of `GeoNodeExecParams`.
Managing this is the responsibility of the evaluator. This separation of
concerns will be useful once we have lazy evaluation of certain inputs/outputs.
Differential Revision: https://developer.blender.org/D11085
This is a first version of an Attribute Transfer node. It only supports two
modes for mapping attributes from one geometry to another for now.
More options are planned for the future.
Ref T87421.
Differential Revision: https://developer.blender.org/D11037
Generally, it would be good to not allow this from happening in the
first place but that is quite tricky because an object does not know
which other object instances it. Similar checks might be necessary
in other places, but this fixes the bug already.
Differential Revision: https://developer.blender.org/D11086
This patch fixes the remaining issues described in T87749. The jitter
was caused by inconsistent rounding when using the floats icon_size
and icon_padding to offset the bound for the text drawing. Using
`round_fl_to_int` leads to consistent results and fixes the jitter
that remained in some buttons with icons, UI lists, and breadcrumbs.
Differential Revision: https://developer.blender.org/D11062
The trouble was that there was a context pointer "modifier" in the
property editor context that returned the active modifier. But the
"modifier" variable was already used in many places, for pointers
that are *not* equivalent to the active modifier.
The context pointer for the active modifier was unecessary anyway.
If we need to access a context pointer for the active modifier in the
property editor then we can add it. Until then it only adds confusion.
Counts of less than one weren't allowed in end points mode mostly to
avoid a division by zero when calculating the delta. It's trivial to
allow a count of one, so this commit does that, with the point placed
at the start location.
2021-04-26 17:01:56 -05:00
724 changed files with 25236 additions and 7935 deletions
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
