Currently the wording is a bit unclear: it doesn't specify //what// the particles will be converted into. This clarifies it by stating what the particles will be converted into: they will either be converted to a mesh or the instances will be made real.
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D11795
Fix an incoherence between the Eevee Materials menu and the Cycles Materials menu :
Eevee :
{F10230448}
Cycles :
{F10230449}
Simply Fixed by replacing the Cycles UI code by the Eevee UI code.
Thanks to @Brainzman for helping me create this diff and translate
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D11979
Just add a check for whether the mesh has faces when retrieving an
attribute on the corner domain. In the future there could be an info
message in the node in this case, since maybe it's not intuitive.
Would previously pass a few properties that are available via the
asset-handle now. This asset-handle is also required for some of the
asset API, e.g. the temporary ID loading. This will probably be needed
before too long.
For this to work, the utility function needs to be callable without
context, which is only needed for a File Browser specific hack anyway
(doesn't apply to this usage of it).
While the asset-handle design is supposed to be temporary (see
35affaa971), I prefer keeping the fact that it's nothing but a file
entry pointer an implementation detail that is abstracted away. So this
introduces getters for the file data we typically access for
asset-handles.
Note that the current asset-handle design is temporary, see
35affaa971. I still prefer this to be const, as code outside the
asset-list/file-list code should never mess with the file data of an
asset.
The asset handle design is only temporary (see 35affaa971) and this
RNA property is only needed for internal, technical reasons of the asset
view template. So although not nice, at least make it clear in the RNA
property description that this should not be used.
Using const indexes and offsets helps to make the logic less sequential,
which is hopefully easier to understand and possibly easier to parallelize
in the future. Also order return arguments last.
If there were lots of selected objects without an existing rigid body,
we would add rigid bodies to them one by one.
This would be slow in python, now we instead do this as a batch
operation in C.
On my (Intel) MacBook it used to take 60 seconds and with this change it
takes about 0.3 seconds.
Reviewed By: Sebastian Parborg
Differential Revision: http://developer.blender.org/D11957
Remove the assumption of the pose library that Action groups are named
after the bones in the armature. Even though this assumption is correct
when the keys are created by Blender, action groups can be renamed. Keys
created by Python scripts can also use arbitrary group names.
Since there is more code in Blender making this assumption, and looping
over selected bones is also a common occurrence, this commit contains
some generic functionality to aid in this:
- `BKE_armature_find_selected_bones`: function that iterates over all
bones in an armature and calls a callback for each selected one. It
returns a struct with info about the selection states (all or no bones
selected).
- `BKE_armature_find_selected_bone_names(armature)` uses the above
function to return a set of selected bone names.
- `BKE_pose_find_fcurves_with_bones()` calls a callback for each FCurve
in an Action that targets a bone, also passing it the bone name.
Convert `pose_backup.c` (in C) to `pose_backup.cc` (in C++). This will
make future improvements easier. For now, it's the same code with just
some additional explicit casts (C++ doesn't allow implicitly casting
`void *`), `NULL` changed into `nullptr`, and some other simple changes.
No functional changes.
When done from the Properties Editor, the context's modifier should be
used (this is where the button is located), when done from elsewhere,
the active modifier is still the way to go (since the context modifier is
not available then)
Maniphest Tasks: T89982
Differential Revision: https://developer.blender.org/D11972
The node tagged polys normals dirty, but the function to calculate the
normals didn't clear the dirty flags for polys. Now clear the poly and
corner dirty normal flags.
The test forgot to set the new need_ids field, which luckily
exposed a bug in the C api for delaunay when that field is false.
Fixed the bug and the test, and added a test for the need_ids false
case.
Wording on the UI, slider consistency and material mask switches layout.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: http://developer.blender.org/D11839
Also use `const Curve *` instead of `const Object *`, since the
function works at a lower level than objects anyway.
And also remove another unused function. Since this section of code
for converting curves to meshes will likely be replaced, it's nicer to
see which parts actually remain used at this point.
Function signatures for snap callbacks used `const` incorrectly
which was hidden by casting function types.
This made it seem as if the input arguments wouldn't be change and
wouldn't be initialized.
Name return arguments with an `r_` prefix, order them last,
remove function casts and correct `const` usage.
When fixing issues, seeing operation results can be helpful for
detecting which operation went wrong.
This commit adds an option for exporting all operations results to
image files.
Exceptions are:
- Output operations: They are already exported or can be seen in UI.
- Constant operations: There are too many and is rarely useful.
They are exported to "<temp session folder>/COM_operations/"
with filenames "<operation class name>_<operation id>.png".
Only works on full frame execution mode.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11722
Adds full frame implementation to this node operation.
No functional changes.
2.4x faster than tiled fallback.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11677
Adds full frame implementation to this node operations.
No functional changes.
2.3x faster than tiled fallback on average.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11686
Adds full frame implementation to this node operation.
No functional changes.
No performance changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11698
Adds full frame implementation to this node operation.
No functional changes.
No performances changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11750
Adds full frame implementation to this node operation.
No functional changes.
3x times faster than tiled fallback.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11635
Currently we mostly iterate buffer areas using x/y loops or through
utility methods extending from base classes.
To simplify code in simple operations this commit adds wrappers for
specifying buffer areas and their iterators for raw buffers with any
element stride:
- BufferRange: Specifies a range of contiguous buffer elements from a
given element index.
- BufferRangeIterator: Iterates elements in a BufferRange.
- BufferArea: Specifies a rectangle area of elements in a 2D buffer.
- BufferAreaIterator: Iterates elements in a BufferArea.
- BuffersIterator: Simultaneously iterates an area of elements in an
output buffer and any number of input buffers.
- BuffersIteratorBuilder: Helper for building BuffersIterator adding
buffers one by one.
For iterating areas coordinates it adds `XRange` and `YRange` methods
that return `IndexRange`.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11882
Although currently only the asset list code uses the asset library
reference wrapper, it can stand on its own and may be used in more
places in the future. So I prefer to give it its own source & header
file.
Also removed unused includes, added proper namespaces as per our C++
style guidelines, and removed an unnecessary TODO comment.
No operator or macro should be missing description. But if they do, then
they should use NULL pointer, and not an empty string.
This behavior was already enforced (through an assert) for operators,
previous commit made it the same for macros.
Code dealing with macro operators missing description field was slightly
different than the one from Operator registration.
This lead to invalid memory accesses in some python introspection cases
like the i18n messages extraction code in `bl_i18n_utils` module.
The code used `Spline::LookupResult` in a way that referred to evaluated
points and control points interchangeably. That didn't affect the logic,
but the code became harder to read. Instead, introduce a local struct
to contain the data in a more obvious way.
Some uses of delaunay_2d_calc don't need to know the original verts,
edges, and faces that correspond to output elements.
This change adds a "need_ids" value to the CDT input spec, default true,
which tracks the input ids only when true.
The python api mathutils.geometry.delaunay_2d_cdt gets an optional
final bool argument that is the value of need_ids. If the argument
is not supplied, it is true by default, so this won't break old uses
of the API.
On a sample text test, not tracking ids save about 30% of the runtime.
For most inputs the difference will not be so dramatic: it only really
kicks in if there are a lot of holes.
Regression introduced in {rBbfa3dc91b754}.
`ID_RECALC_GEOMETRY` should tag all operations of the `GEOMETRY`
component and not just the operation of node `GEOMETRY_EVAL_INIT`.
This node implements shortening each spline in the curve based on
either a length from the start of each spline, or a factor of the
total length of each spline, similar to the "Start & End Mapping"
panel of curve properties.
For Bezier curves, the first and last control points are adjusted
to maintain the shape of the curve, but NURB splines are currently
implicitly converted to poly splines.
The node is implemented to avoid copying where possible, so it outputs
a changed version of the input curve rather than a new one.
Differential Revision: https://developer.blender.org/D11901
After rB3b6ee8cee708 by @HooglyBoogly vertex groups were moved
to mesh data, and versioning code was provided to upgrade old
files. However, it fails to consider the case of linked duplicates
having different name lists, and dependent on the object order
can cause some of the names to be lost. This can even be all of
them, if there is a duplicate without any names, which can be
easily created by lazy Python code.
To fix this, change the code to use the longest available name list.
Differential Revision: https://developer.blender.org/D11958
Using part of a patch from Erik Abrahamsson, this replaces the
use of linked lists for original id tracking by Sets.
I had thought that the lists were unlikely to grow to more than
a few elements, but when the mesh has a lot of holes (whose
original ids go *outside* the hole, and therefore, most of the
mesh), this assumption can be very wrong.
On a Text regression test, the time went from 11.67s to 0.16s
with this fix. I also tested to make sure that Boolean didn't
slow down with this, and found it actually had a very slight speedup.
Using Sets exposed a dependency on the ordering of the items
in the id lists, luckily caught by a mesh intersect regression test,
so fixed that.
Scaling down images could create images with a width or height of zero.
Clamp at 1 to prevent a crash, also add an assert to scaling functions.
Ref D11956
`split_multicam` used split operator, where if more strips than
multicam were selected, all would be split, which is undesirable.
Add `Sequence.split()` RNA API function. to split individual strips.
Function accepts `frame` and `split_method arguments`. Returns right
strip after splitting.
In case when strip being split have effects, these will be split too, so
no invalid state should be created.
Selection is not handled, this is by design up to user.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11926
This will help enable development on optimizations to the perimeter
calculation here. Using C++ data structures like Array can make the
code easier to read as well.
Longer term, this can help improve integration with attributes
and possibly the new curve code (since strokes and curves are
quite similar in theory).
Differential Revision: https://developer.blender.org/D11941
We need to be more strict about trying to retrieve a list of vertex group
names from objects now, as only three object types support them.
This commit adds a check for vertex group support in a few places, the
data transfer operator/modifier, copying vertex groups to selected
objects, and the vertex group remove and clear functions.
Differential Revision: https://developer.blender.org/D11947
When a vertex group is used to limit the influence of the modifier
to a subset of vertices, binding data for vertices with zero weight
is not needed. This wastes memory, disk space and CPU cycles.
If the vertex group contents is known to be final and constant,
it is reasonable to optimize by only storing data group vertices.
This has to be an option in case the group can change.
Supporting this requires adding a vertex index field and spliting
the vertex count into mesh and bind variants, but both happen to
fit in available padding. The old numverts field is renamed to the
new bound vertex count field to maintain the array length invariant.
Versioning is used to initialize the other new fields.
If a file with sparse binding is opened in an old blender version,
it is corrupted into a non-sparse bind with vertex count mismatch,
preventing the modifier from working until rebind.
Differential Revision: https://developer.blender.org/D11924
`POINT_CACHE_RESET` pointed to `GEOMETRY_EVAL_INIT` while
`GEOMETRY_EVAL_INIT` pointed to `POINT_CACHE_RESET`.
Now `POINT_CACHE_RESET` points to the same nodes pointed to by
`GEOMETRY_EVAL_INIT` thus avoiding the dependency cycle.
The crash happens because `GPU_offscreen_create` is called with `err_out` `NULL`.
This patch proposes a solution within the `GPU_offscreen_create` itself
and raises an error report in the interface if a menu is called with
dimensions beyond what is supported.
Ref T89782
Maniphest Tasks: T89782
Differential Revision: https://developer.blender.org/D11927
The `action_preview_render()` function used to just render, but now it
also temporarily applies the pose. Its comment is now updated for this.
No functional changes.
Replaces current ID Mask node Anti-Aliasing operation by SMAA
operations with default settings as proposed by Jeroen Bakker.
SMAA produces smoother edges.
Reviewed By: manzanilla
Differential Revision: https://developer.blender.org/D11881
In driver editor, vertically flip the value debug lines to align
them with the timeline header values. This makes it easier to read
the values. Also set the line width explicitly, which was incorrect
in some cases.
Differential Revision: https://developer.blender.org/D8877
This move was already prepared with 788d380460 and 26b098c04f. The
template is quite big already, better to give it its own file. Plus it
could use some C++ features like RAII and maybe some more object
oriented code. I plan further refactoring there.
It turns out `BKE_mesh_copy_parameters` can be called while other
tools are running calculations, which meant that it was called at the
same time as `armature_deform_coords_impl`. Beause of that, we
shouldn't do any freeing (of the old vertex group names) there.
Since the materials are copied in the "for_eval" version anyway,
it seems to make sense to copy the vertex group name list there also.
Fixes T89877, and also the failing `deform_modifiers` test.
Differential Revision: https://developer.blender.org/D11936
The new Asset Browser-based pose library is partially implemented in an
add-on. This commit enables the add-on by default, as the old pose
library was built-in and thus always enabled.
The ability to disable the add-on is there mostly for cases where
people/studios want to use their own custom pose library.
Correct cases where the X-axis of the bone (in pose space) aligns with
the pose-space Y or Z-axis. In these cases the decomposition of the
matrix fails, and a negative scale of the X-axis turns into a 180°
rotation around the Y-axis. An extra -1 scale to the X and Z axes of the
resulting matrix seems to fix things.
The asset view UI template is a mini-version of the Asset Browser that
can be placed in regular layouts, regions or popups. At this point it's
made specifically for placement in vertical layouts, it can be made more
flexible in the future.
Generally the way this is implemented will likely change a lot still as
the asset system evolves.
The Pose Library add-on will use the asset view to display pose
libraries in the 3D View sidebar.
References:
* https://developer.blender.org/T86139
* https://code.blender.org/2021/06/asset-browser-project-update/#what-are-we-building
* https://code.blender.org/2021/05/pose-library-v2-0/#use-from-3d-viewport
Notes:
* Important limitation: Due to the early & WIP implementation of the
asset list, all asset views showing the same library will show the
same assets. That is despite the ID type filter option the template
provides. The first asset view created will determine what's visible.
Of course this should be made to work eventually.
* The template supports passing an activate and a drag operator name.
The former is called when an asset is clicked on (e.g. to apply the
asset) the latter when dragging (e.g. to .blend a pose asset). If no
drag operator is set, regular asset drag & drop will be executed.
* The template returns the properties for both operators (see example
below).
* The argument list for using the template is quite long, but we can't
avoid that currently. The UI list design requires that we pass a
number of RNA or custom properties to work with, that for the Pose
Libraries should be registered at the Pose Library add-on level, not
in core Blender.
* Idea is that Python scripts or add-ons that want to use the asset view
can register custom properties, to hold data like the list of assets,
and the active asset index. Maybe that will change in future and we
can manage these internally.
As an example, the pose library add-on uses it like this:
```
activate_op_props, drag_op_props = layout.template_asset_view(
"pose_assets",
workspace,
"active_asset_library",
wm,
"pose_assets",
workspace,
"active_pose_asset_index",
filter_id_types={"filter_action"},
activate_operator="poselib.apply_pose_asset",
drag_operator="poselib.blend_pose_asset",
)
drag_op_props.release_confirm = True
drag_op_props.flipped = wm.poselib_flipped
activate_op_props.flipped = wm.poselib_flipped
```
So far all UI lists had to be defined in Python, this makes it possible
to define them in C as well. Note that there is a whole bunch of special
handling for the Python API that isn't there for C. I think most
importantly custom properties support, which currently can't be added
for C defined UI lists.
The upcoming asset view UI template will use this, which needs to be
defined in C.
Adds a new file `interface_template_list.cc`, which at this point is
mostly a dummy to have a place for the `ED_uilisttypes_ui()` definition.
I plan a separate cleanup to move the UI-list template to that file.
This button type shows a preview image above centered text, similar to
the File Browser files in Thumbnail Display Mode or the default Asset
Browser display. In fact we may want to port these over to use the new
button type at some point.
Will be used by the asset view UI template that will be added in a
following commit. That is basically a mini version of the Asset Browser
that can be displayed elsewhere in the UI.
If a text button is activated that is not in view (i.e. scrolled away),
the scrolling will now be adjusted to have it in view (with some
small additional margin). While entering text, the view may also be
updated should the button move out of view, for whatever reason. For the
most part, this feature shouldn't be needed and won't kick in, except
when a clicked on text button is partially out of view or very close to
the region edge. It's however quite important for the previously
committed feature, that is, pressing Ctrl+F to start searching in a UI
list. The end of the list where the scroll button appears may not be in
view. Plus while filtering the number of visible items changes so the
scrolling has to be updated to keep the search button visible.
Note that I disabled the auto-scrolling for when the text button spawned
an additional popup, like for search-box buttons. That is because
current code assumes the button to have a fixed position while the popup
is open. There is no code to update the popup position together with the
button/scrolling.
I also think that the logic added here could be used in more places,
e.g. for the "ensure file in view" logic the File Browser does.
Adds an operator invoked by default with Ctrl+F that while hovering a UI
list, opens the search field of the list and enables text input for it.
With this commit the search button may actually be out of view after
Ctrl+F still. The following commit adds auto-scroll to solve that.
A downside is that in the Properties, there also is Ctrl+F to start
the editor-wide search. That's not unusual in Blender though (e.g.
scolling with the mouse over a UI list also scrolls the list, not the
region).
Makes it possible to create tooltips for UI list rows, which can be
filled in .py scripts, similar to how they can extend other menus. This
is used by the (to be committed) Pose Library add-on to display pose
operations (selecting bones of a pose, blending a pose, etc).
It's important that the Python scripts check if the UI list is the
correct one by checking the list ID.
For this to work, a new `bpy.context.ui_list` can be checked. For
example, the Pose Library add-on does the following check:
```
def is_pose_asset_view() -> bool:
# Important: Must check context first, or the menu is added for every kind of list.
list = getattr(context, "ui_list", None)
if not list or list.bl_idname != "UI_UL_asset_view" or list.list_id != "pose_assets":
return False
if not context.asset_handle:
return False
return True
```
Add improved arrow key walk navigation in grid layout UI List templates.
Pressing up or down walks the active item to the adjacent row in that
direction, while left and right walk through the items along the columns
wrapping at the rows.
Note from Julian:
In combination with the following commit, this has the important
limitation that the list's custom activate operator won't be called when
"walking over" an item that is scrolled out of the list. That is because
we don't actually create any buttons for those that could be used for
the handling logic. For our purposes of the pose libraries that should
be fine since the asset view list is always made big enough to display
all items. Solving this might be difficult, we don't properly support
nesting boxes with proper scrolling in regular layouts. It's all just
hacked a bit for UI-lists to work. Overlaps quite a bit with T86149.
Differential Revision: https://developer.blender.org/D11063
For pose libraries, we need to be able to apply a pose whenever
activating (clicking) an item in the Pose Library asset view and blend
it by dragging (press & move). And since we want to allow Python scripts
to define what happens at least when activating an asset (so they can
define for example a custom "Apply" operator for preset assets), it
makes sense to just let them pass an operator name to the asset view
template. The template will be introduced in a following commit.
This new layout type is meant for the upcoming asset view UI template.
With it it is possible to show big asset previews with their names in a
responsive grid layout.
Notes:
* The layout is only available for C defined UI lists. We could expose
it to Python, but I think there are still some scrolling issues to be
fixed first. (The asset view template doesn't use scrolling for the UI
list.)
* I'd consider this a more usable version of the existing `GRID` layout
type. We may remove that in favor of the new one in future.
This is more of a first-pass refactor for the UI list template. More
improvements could be done, but that's better done separately. Main
purpose of this is to make the UI list code more manageable and ready
for the asset view template.
No functional changes for users.
* Split the huge template function into more manageable functions, with
clear names and a few structs with high coherency.
* Move runtime data management to the template code, with a free
callback called from BKE. This is UI data and should be managed at
that level.
* Replace boolean arguments with bit-flags (easily extendable and more
readable from the caller).
* Allow passing custom-data to the UI list for callbacks to access.
* Make list grip button for resizing optional.
* Put logic for generating the internal UI list identifier (stored in
.blends) into function. This is a quite important bit and a later
commit adds a related function. Good to have a clear API for this.
* Improve naming, comments, etc.
As part of further cleanups I'd like to move this to an own file.
When generating a preview image for a pose, temporarily apply it to the
armature. Contrary to the usual pose application, this ignores the
selected bones and always applies the entire pose.
Introduce new pose library, based on the Asset Browser. Contrary to the
old pose library (in `editors/armature/pose_lib.c`), which stored an
entire library of poses in an `Action`, in the new library each pose is
its own `Action` datablock. This is done for compatibility with the
asset browser, and also to make it easier to attach preview images,
share datablocks, etc. Furthermore, it opens the door to having
animation snippets in the pose library as well.
This commit contains the C code for the pose library; in order to fully
use it, an addon is required as well (which will be committed shortly).
Add function `BKE_pose_apply_action_blend()`, which blends a given
Action into current pose. The Action is evaluated at a specified frame,
and the result is applied to the armature's pose.
A blend factor can be given to blend between the current pose and the
one in the Action. Quaternions are interpolated with SLERP; it is
assumed that their FCurves are consecutively stored in the Action.
This function will be used in the upcoming new Pose Library.
New function `BKE_pose_apply_action_all_bones()`, which will be
necessary for the upcoming pose library v2.0.
This renames the function `BKE_pose_apply_action` to
`BKE_pose_apply_action_selected_bones`, to reflect that it only works on
selected bones, to contrast it to the new function.
Add operator 'Open Blend File' to the Asset Browser. This operator:
- starts a new Blender process,
- opens the blend file containing the asset,
- monitors the new Blender process, and when it stops,
- reloads the assets to show any changes made.
This is an editor-level abstraction for the `BLO_library_temp_xxx()`
API for temporary loading of data-blocks from another Blend file. It
abstracts away the asset specific code, like asset file-path handling
and local asset data-block handling.
Main use-case for this is applying assets as presets that are based on
data-blocks, like poses. Such preset assets are an important part of the
asset system design, so such an abstraction will likely find more usage
in the future.
Adds the following to `bpy.types.FileSelectEntry`:
* `id_type`: The data-block type the file represenets, if any.
* `local_id`: The local data-block it represents, if any (assets only).
And the following to `bpy.types.AssetHandle`:
* `local_id`: The local data-block the asset represents, if any.
This kind of information and the references are important for asset related
operators and UIs. They will be used by upcoming Pose Library features.
Implements a basic, WIP version of the asset list. This is needed to
give the asset view UI template asset reading and displaying
functionality.
See:
* Asset System: Data Storage, Reading & UI Access - https://developer.blender.org/T88184
Especially the asset list internals should change. It uses the
File/Asset Browser's `FileList` API, which isn't really meant for access
from outside the File Browser. But as explained in T88184, it does a lot
of the stuff we currently need, so we (Sybren Stüvel and I) decided to
go this route for now. Work on a file-list rewrite which integrates well
with the asset system started in the `asset-system-filelist` branch.
Further includes:
* Operator to reload the asset list.
* New `bpy.types.AssetHandle.get_full_library_path()` function, which
gets the full path of the asset via the asset-list.
* Changes to preview loading to prevent the preview loading job to run
eternally for asset views. File Browsers have this issue too, but
should be fixed separately.
It's useful to know where an asset is stored in, before this there was no way
to tell this. This could probably be displayed nicer in the UI but we're
currently unsure how. But at least the information is there now.
With temporary I mean that this is not intended to be part of the
eventual asset system design. For that we are planning to have an
`AssetRepresentation` instead, see T87235. Once the `AssetList` is
implemented (see T88184), that would be the owner of the asset
representations.
However for the upcoming asset system, asset browser, asset view and
pose library commits we need some kind of asset handle to pass around.
That is what this commit introduces.
Idea is a handle to wrap the `FileDirEntry` representing the asset, and
an API to access its data (currently very small, will be extended in
further commits). So the fact that an asset is currently a file
internally is abstracted away. However: We have to expose it as file in
the Python API, because we can't return the asset-handle directly there,
for reasons explained in the code. So the active asset file is exposed
as `bpy.context.asset_file_handle`.
For the Asset Browser, this returns the active asset library of the
Asset Browser, otherwise it returns the one active in the workspace.
This gives simple access to the active asset library from UI code and
Python scripts. For example the upcoming Pose Library add-on uses this,
as well as the upcoming asset view template.
This per-workspace active asset library will be used by the asset views
later. Note that Asset Browsers have their own active asset library,
overriding the one from the workspace.
As part of this the `FileSelectAssetLibraryUID` type gets replaced by
`AssetLibraryReference` which is on the asset level now, not the
File/Asset Browser level. But some more work is needed to complete that,
which is better done in a separate commit.
This also moves the asset library from/to enum-value logic from RNA to
the editor asset level, which will later be used by the asset view.
Update vertex weights between simulation steps if they have changed.
This allows for animated vertex weights in the cloth sim.
Reviewed By: Sebastian Parborg
Differential Revision: http://developer.blender.org/D11640
The `__enter__` function of the `bpy.data.libraries.load` context manager
was storing a pointer to a stack-allocated variable, which was subsequently
used in the `__exit__` function, causing a crash. This is now fixed.
Thanks @Severin for the patch.
If text strips have the same start frame but are stacked on top of each
other in different channels the order in which they are written in the
.rst file was random before.
Reviewed By: Richard Antalik
Differential Revision: https://developer.blender.org/D11903
Mainly naming (also droping the `layer_collection` in favor of just
`layer` for internal code, this is clear enough and much shorter). Add
proper parent/child identifiers, `r_` prefix for parameters also used as
return values, etc.
Also made some parameters const.
The original refactor for vertex groups (3b6ee8cee7)
forgot to bump the minimum file requirement.
I'm also bumping the subversion to 12 so everyone can switch to a
working subversion number.
Differential Revision: https://developer.blender.org/D11931
This makes node trees with long links that cross other nodes easier to work with.
Dimmed links will be ignored by various modal operators like cut and reroute insertion.
Differential Revision: https://developer.blender.org/D11813
We were manually setting the compiler flags
for C++17 support for this previously. CMake
can do this for us in a uniform way without
having to worry about compiler specifics.
Setting these flags manually somehow brought
out some unwanted behaviour (CMake switching
back to C++14) in the nightly CMake builds.
Unsure if that's a CMake bug or planned
new behaviour for future version, but best
to play it safe.
These flags are supported since CMake 3.1
so should not break anything.
Reviewed by: Campbell Barton
Differential Revision: https://developer.blender.org/D11891
This logic is from the curve sundivide node, used to add points with
proper handles in between two existing points. However, the same logic
is used for trimming of Bezier splines, and possibly interactive point
insertion in the future, so it's helpful as a general utility.
The logic is converted to depend on a bezier spline instead of being
static. A temporary segment spline can be used for the latter use case.
This adds id_properties_clear() and id_properties_ensure() functions
to RNA structs. This is meant as an initial change based on discussion
in review of D9697. However, they may be useful in other situations.
The change requires refactoring the internal idproperties callback to
return a pointer to the IDProperty pointer, which actually turns out
to be quite a nice cleanup.
An id_properties attribute could be added in the future potentially.
Differential Revision: https://developer.blender.org/D11908
The general graphing mechanism will create one graph for each output
variable. So it's not limited to time and memory, but that is what the
Cycles tests now output.
The BKE_gpencil_stroke_add_points API function worked well for
creating the primitives in the add object menu, but it expected a
specific data format that doesn't make sense in a dynamic context.
As evidence of that we can see the way source data was duplicated
in the line art file just to use this API function.
This commit solves that problem in two ways:
- Clean up the line art function (this should make it faster too).
- Move/rename the function so its intended use is more clear.
Differential Revision: https://developer.blender.org/D11909
Non-pointer-like properties that are not editable should never generate
override operations.
While harmless (those would never be applied back anyway), better not
clutter override operations list, and also enjoy the symbolic
performances improvement here.
NOTE: Pointer-like properties (pointers and collections) remain
processed as usual here since they usually imply recursivity. We could
make an exception to the exception for ID pointers, but for now I don't
think this is worth it.
Issue would happen when the original, linked data already had 'Disk Cache'
setting enabled. Override would then see no difference with linked data,
and not create any rule for it (as expected).
Root of the issue was that in Cloth modifier copy code, those disk cache
settings were not copied at all, so every time local overrides were
re-generated by copying linked data, those flags would be reset to their
default values.
NOTE: this might exist in other PointCache usages as well, but this code is
in such a bad state that I'd rather do minimal strictly needed changes
there, on a case-by-case basis. Proper recode of that whole system is
wayyyyy out of scope here.
When image strip is added from python using `image_strip_add` operator
and directory path is not terminated with slash, last part of directory
was ignored.
Use `BLI_join_dirfile` instead of simple string concatenation.
Constraining to X axis caused snapping to not work at all. Constraining
to Y axis caused snapping indicator to be drawn, when snapping doesn't
occur.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11898
nodes or sockets" error
rBfe22635bf664 introduced a utility to check for this (but it was always
returning true).
This wasnt a problem in master (since it is unused there), but in the
2.93 branch, this utility is actually used and the error results in all
geometry nodetrees to appear with the "Node group has unidentified nodes
or sockets" message (and being unusable).
Now return false in has_undefined_nodes_or_sockets if all nodes and
sockets have been successfully checked.
This commit then needs to end up in the 2.93 branch.
Maniphest Tasks: T89851
Differential Revision: https://developer.blender.org/D11911
Socket inspection helps with debugging a geometry node group.
Now, when hovering over a socket, a tooltip will appear that provides
information about the data in the socket. Note, socket inspection only
works for sockets that have been computed already. Nodes that are not
connected to an output are not computed.
Future improvements can include ui changes to make the tooltip look
more like in the original design (T85251). Furthermore, additional
information could be shown if necessary.
Differential Revision: https://developer.blender.org/D11842
Use more direct access to next/previous vertices.
- `BM_edge_other_vert(l_curr->e, l_curr->v)` -> `l_curr->next->v`.
- `BM_edge_other_vert(l_curr->prev->e, l_curr->v)` -> `l_curr->prev->v`.
Add asserts to keep the intention clear.
Adds full frame implementation to this node operations.
No functional changes.
2.5x faster than tiled fallback on average.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11690
Not causing issues in current master because all buffer areas are at
(0, 0) position and `Extend` is not used. But areas may be at any
position in future developments and it will crash.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11784
Link sockets are always connected to inserted translate or scale
operation `Color` sockets even when they have different data type.
This causes crashes on full frame mode when operations read inputs
with non expected datatypes.
Because data type conversions need to be executed before, convert
resolutions must ensure same datatypes are linked.
This commit moves the storage of `bDeformGroup` and the active index
to `Mesh`, `Lattice`, and `bGPdata` instead of `Object`. Utility
functions are added to allow easy access to the vertex groups given
an object or an ID.
As explained in T88951, the list of vertex group names is currently
stored separately per object, even though vertex group data is stored
on the geometry. This tends to complicate code and cause bugs,
especially as geometry is created procedurally and tied less closely
to an object.
The "Copy Vertex Groups to Linked" operator is removed, since they
are stored on the geometry anyway.
This patch leaves the object-level python API for vertex groups in
place. Creating a geometry-level RNA API can be a separate step;
the changes in this commit are invasive enough as it is.
Note that opening a file saved in 3.0 in an earlier version means
the vertex groups will not be available.
Differential Revision: https://developer.blender.org/D11689
When adding texts or various simple effects I often copy-paste strips
to reuse properties from a template such as font or position. I assume
this is common workflow. Issue with this workflow is, that active strip
is not changed after pasting, so when adjusting property, it is original
strip that is being modified.
This is not issue when duplicating strips - selection state is
transfered to duplicate strips, such that duplicate of active strip is
set to be active and duplicate of selected strip is set to selected.
Implement same selection transfering behavior in paste operator, that
exists in duplicate operator.
Since strip can be deleted after copying, it is not possible to rely
on sequencer state. This is true even when pasting strips to different
scene. Therefore active strip name must be stored in clipboard.
Reviewed By: sergey, Severin
Differential Revision: https://developer.blender.org/D11781
Caused by fba9cd019f, then fixed by 0e4245bc28, but without
subversion bump, so some files were still broken after fix.
Repeat fix again, but this time also bump subversion.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D11864
Use the same partial-update functions used by transform when
editing vertex locations with the number buttons.
This avoids unnecessary calculations for normals and tessellation.
This gives around 1.44x overall speedup on high poly meshes.
Support for begin/update/end callbacks allowing state to be cached
and reused while dragging a number button or slider.
This is done using `UI_block_interaction_set` to set callbacks.
- Dragging multiple buttons at once is supported,
passing multiple unique events into the update function.
- Update is only called once even when multiple buttons are edited.
- The update callback can detect the difference between click & drag
actions so situations to support skipping cache creation and
freeing for situations where it's not beneficial.
Reviewed by: Severin, HooglyBoogly
Ref D11861
In most cases the undo system was loading undo steps twice.
This was needed since some undo systems (sculpt, paint, text)
require stepping out of the current undo step.
Use a flag to limit this to the undo systems that need it.
This improves performance for other undo systems.
This gives around 1.96x speedup in edit-mesh for high-poly objects.
Reviewed by: mont29
Ref D11893
- Tag the object data instead of the object when decoding
(this avoids duplicating mesh object-data on each undo-step).
- Calculate face normals as part of multi-threaded tessellation.
This gives ~11% speedup with 1.5x million polygons.
Rename:
- EDBM_mesh_free -> EDBM_mesh_free_data
BKE_editmesh_free -> BKE_editmesh_free_data
Since this doesn't free the edit-mesh pointer.
- BKE_editmesh_free_derivedmesh -> BKE_editmesh_free_derived_caches
Since this no longer uses derived-mesh, match naming for the related
object function BKE_object_free_derived_caches.
Also remove `do_tessellate` argument from BKE_editmesh_create,
since the caller can explicitly do this if it's needed,
with the advantage that it can be combined with normal calculation
which is faster on high-poly meshes.
All platforms support the proper format string and it's already used in
various other places.
Differential Revision: https://developer.blender.org/D11460
During a mesh transformation in edit mode (Move, Rotate...), only part of
the batch cache needs to be updated.
This commit allows only update only the drawn batches seen in
`BKE_object_data_eval_batch_cache_deform_tag` if the new
`ID_RECALC_GEOMETRY_DEFORM` flag is used.
This new flag is used in the transforms operation for edit-mesh and
results in 1.6x overall speedup in heavy subdiv cube.
Differential Revision: https://developer.blender.org/D11599
This might be an artistic choice, but round end caps are supposed to be
a "half circle centered at the end point of the line" as documented
here: https://docs.blender.org/manual/en/dev/render/freestyle/
parameter_editor/line_style/strokes.html#caps
They are a shashed half circle instead.
This patch makes this pure half circles [and also fixes the case where
thickness of beginning was used for both beginning and end of the
stroke]
Maniphest Tasks: T88015
Differential Revision: https://developer.blender.org/D11340
This commit adds a curve primitive node for creating squares,
rectangles, trapezoids, kites, and parallelograms. It also includes
a mode where the four points are just vector inputs.
Differential Revision: https://developer.blender.org/D11665
In this bug report it resulted in rendering animations stopping too early,
but this affected more areas.
After the previous cleanup commit, it becomes clear that frame and ctime
values were mixed up.
Confusingly, BKE_scene_frame_get did not match the frame number as expected by
BKE_scene_frame_set. Instead it return the value after time remapping, which
is commonly named "ctime".
* Rename BKE_scene_frame_get to BKE_scene_ctime_get
* Add a new BKE_scene_frame_get that matches BKE_scene_frame_set
* Use int/float depending if fractional frame is expected
It always bothered me that we'd do the `BLI_assert(... || !"message")` trick to
print a message alongside the assert, while it should be trivial to have a way
to pass an extra string as additional argument.
This adds `BLI_assert_msg()` with a second argument for a message. E.g.:
```
BLI_assert_msg(
params->rename_id == NULL,
"File rename handling should immediately clear rename_id when done, because otherwise it will keep taking precedence over renamefile.");
```
On failure this will print like this:
```
0 Blender 0x00000001140647a3 BLI_system_backtrace + 291
[...]
13 Blender 0x00000001092647a6 main + 3814
14 libdyld.dylib 0x00007fff203d8f5d start + 1
BLI_assert failed: source/blender/editors/space_file/file_ops.c:2352, file_directory_new_exec(), at 'params->rename_id == ((void*)0)'
File rename handling should immediately clear rename_id when done, because otherwise it will keep taking precedence over renamefile.
```
Reviewed by: Sybren Stüvel, Jacques Lucke, Sergey Sharybin, Campbell Barton
Differential Revision: https://developer.blender.org/D11827
The 'collection' property is flagged PROP_ID_REFCOUNT, so the
modifiers foreachIDLink functions should walk with IDWALK_CB_USER
(instead of IDWALK_CB_NOP).
Otherwise the modifier wont be included as a user for the collection
(e.g. on file read); removing the collection from the modifier will
decrement usercount though (which in worst case scenario makes the
collection orphan and will result in data loss)
Maniphest Tasks: T89765
Differential Revision: https://developer.blender.org/D11877
When editing vertices with number buttons, tag the mesh, not the object.
This prevents the evaluated mesh being re-created for the object
and is correct as the mesh is being edited not the object.
Note that all tags for updating object geometry should be checked
to see if this change should be applied there too.
From a simple test on a high-poly mesh this gives around 1.3x
overall speedup.
After cache implementation line art apply will not show strokes properly, now fixed.
# Conflicts:
# source/blender/gpencil_modifiers/intern/MOD_gpencillineart.c
The Pattern and Search display options in the Clip Editor display settings
are independent and should not be grayed out since those options
remain relevant even with path display turned off.
Alternative solution were propoesed in D11630 and D11715
but each of those patches had downsides.
This solution is the simplest and does not break muscle memory.
Channel packed images should not have their RGB affected by alpha.
rendering in Cycles and Eevee was fine already, but displaying these was
not right in the Image and Node editors.
Not 100% sure what to do for the "Color and Alpha" mode, but I guess
this should stay like it was before (applying the alpha).
"Color", "R", "G", and "B" modes were changed to not have color be
affected by alpha though.
ref. T89034
Maniphest Tasks: T89034
Differential Revision: https://developer.blender.org/D11871
Fly navigation has always had this option. They is particularly useful
when users use "Trackball" as their orbit method.
For walk navigation this works as a one off option. Not as a toggle like
for fly navigation.
Differential Revision: https://developer.blender.org/D11863
Correctly reset `prev` and `next` pointers of action group FCurves when
separating them into distinct `ListBase`s per `bActionGroup`.
These `NULL` pointers are necessary to temporarily demarcate the start &
end of the `bActionGroup::channels` list. Having them still point to
other FCurves caused ordering issues when moving curves towards the
start/end of a group.
This commit corrects the above issue and adds versioning code to rectify
any ordering issues that may have been caused. For this purpose the
`BKE_action_groups_reconstruct()` function is rewritten to avoid relying
on the `bAction::curves` list order or `prev` link integrity.
Differential Revision: https://developer.blender.org/D11811
Simple upgrade of OpenXR to 1.0.17. A version bump was enough, no
Blender code had to change.
Reviewed By: LazyDodo, mont29
Differential Revision: https://developer.blender.org/D11848
It was possible that render buffers and scene kernel data will be out
of sync because reset and scene update happens in different locks.
This is similar issue we've fixed in the Cycles X branch, so backported
relevant changes from there.
This change removes what seems to be unused feature kernel.
Differential Revision: https://developer.blender.org/D11828
This change makes the behavior consistent between shortcut and
option from space clip's header.
The only caveat is that the "Lock to Selection" is removed from the
Display popover. This is because it is rather hard to make operator
to render same as regular checkbox. However, shouldn't be a problem
because the setting in popover was redundant.
Differential Revision: https://developer.blender.org/D10423
The node group interface panels were still implemented in C.
Now they ported over to python for easier maintenance.
Differential Revision: https://developer.blender.org/D11834
In addition to _object_ animation, now _object data_ (mesh, curve, ...)
animation can now be made single user as well.
This came up in T89369 and while it is possible to do this via the
Outliner [where all actions have to be selected individually], this
seems to be more convenient to be done from the 3DView.
note: usercount of the action is checked now, if it single-user already,
no copy takes place (same thing could/should be done for
single_object_action_users as well).
note2: obdata is made single user as well (otherwise duplicated actions
will be assigned to the same shared obdata - which does not result in
unique animadata which is what we are after here)
ref. T89369
Maniphest Tasks: T89369
Differential Revision: https://developer.blender.org/D11683
Previously, this did not compile in VS 2017, because
`new T(initializer_())` would try to call the copy constructor of `T`.
Now, `initializer_` will construct the `T` inplace.
Renaming compositor node in search panel "View Switch" to "Switch View"
for better consistency.
Reviewed By: dfelinto
Differential Revision: https://developer.blender.org/D11717
Using the "Camera Fit Frame to Selected" operator didn't work for Grease Pencil
objects. The same issue caused grease pencil preview thumbnails to be useless
(e.g. when using "Mark Asset" on a Grease Pencil object).
Reason was that there was no logic to handle grease pencil data and its strokes
for the object display-point iterators used for the "Frame Selected" logic.
Addresses T89656.
Reviewed by: Antonio Vazquez, Campbell Barton
Differential Revision: https://developer.blender.org/D11833
The original assumption that the `modifyMesh` function is only
called when the modifier is applied was wrong. There are still a
couple of other places calling it through `BKE_modifier_modify_mesh`.
Now there is an extra check that makes sure instances are only
realized when the modifier is actually applied.
The backdrop image gizmo was not following the backdrop image, it
needs to be refreshed whenever the view changes. The region init
callback is executed whenever the region size changes, so that should be
a reliable place to do that.
Reported as part of T87591.
In a collapsed hierarchy, some type of data are listed as one icon per
item (2.79 did this for all data),
others are 'compacted' as a single icon with a counter (also indicating
if the active item is down that collapsed hierarchy) from 2.80 on.
Not quite sure if {rB92dfc8f2673e} was meant to do this (if it was, this
was not working though because relevant code would only get executed for
object hierarchies it seems), so now this is done for bones as well.
Fixes T88413.
Maniphest Tasks: T88413
Differential Revision: https://developer.blender.org/D11404
With this commit, curve objects support the nodes modifier. The goal is
that nodes modifiers will read curve data as the original curve, unless
they are placed after a modifier that must tessalate the curve (convert
it to a mesh). Always converting to a mesh in that case is basically
just a formalization of the behavior that was already present after
recent fixes for 2.8 versions last year and two years ago. For more
controlled explicit conversions between data types, using geometry
nodes makes so much more sense anyway.
TODO:
- Add more code comments
- Fix memory leak(s?)
- Fix geometry components besides mesh don't display in viewport.
Differential Revision: https://developer.blender.org/D11597
2021-06-14 01:14:48 -05:00
838 changed files with 16711 additions and 7795 deletions
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
