Add a Gaussian smoothing operator to supersede the current
smoothing operator in the graph editor.
Advantage over the current implementation:
* Supports modal operations
* Is independent of key density
* More options in the redo panel
* More predictable Impulse Response
Option in the redo panel to change
Filter Width: How far out on each side of a key the code checks
to average key values
Sigma: The shape of the bell curve, lower values make a sharper bell curve
reducing the smoothing effect.
Too High values will make the code behave like an average filter as the
curve in the -1/1 range will almost be flat.
On a technical note, the operator needs to store additional data when running in modal
to avoid allocating/deallocating data on every modal run.
For that reason the `tGraphSliderOp` struct has been extended with
`void *operator_data` and `void (*free_operator_data)(void *operator_data)`.
The former is the data and the latter is a function responsible for freeing that data.
Pull Request: blender/blender#105635
Added a new operator that aligns selected keys on an exponential curve
Revied by Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D9479
Ref: D9479
Removes the following macros for scene/render frame values:
- `CFRA`
- `SUBFRA`
- `SFRA`
- `EFRA`
These macros don't add much, other than saving a few characters when typing.
It's not immediately clear what they refer to, they just hide what they
actually access. Just be explicit and clear about that.
Plus these macros gave read and write access to the variables, so eyesores like
this would be done (eyesore because it looks like assigning to a constant):
```
CFRA = some_frame_nbr;
```
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D15311
Grease Pencil animation channels are now also shown in the Dopesheet
mode of the Dopesheet editor and in the Timeline.
Grease pencil related events are now listened not only by container
`SACTCONT_GPENCIL` (Grease Pencil Dopesheet), but also
`SACTCONT_DOPESHEET` (main Dopesheet), and `SACTCONT_TIMELINE`
(timeline).
A new Animation Filter flag was added: `ANIMFILTER_FCURVESONLY`. For now
this only filters out Grease Pencil Layer channels.
**Implemented:**
- Preview range set: now only considers selected Grease Pencil keyframes
when `onlySel` parameter is true. Not only this allows the operator to
work with grease pencil keyframes in main dopesheet, but it also fixes
the operator in the Grease Pencil dopesheet.
- Translation: allocation (and freeing) of specific memory for
translation of Grease Pencil keyframes.
- Copy/Paste: call to both Fcurve and GPencil operators, to allow for
mixed selection. Errors are only reported when both the FCurve and
GPencil functions fail to paste anything.
- Keyframe Type change and Insert Keyframe: removed some code here to
unify Grease Pencil dopesheet and main dopesheet code.
- Jump, Snap, Mirror, Select all/box/lasso/circle, Select left/right,
Clickselect: account for Grease Pencil channels within the channels
loop, no need for `ANIMFILTER_FCURVESONLY` there.
**Not Implemented:**
- Graph-related operators. The filter `ANIMFILTER_FCURVESONLY` is
naively added to all graph-related operators, meaning more-or-less all
operators that used `ANIMFILTER_CURVE_VISIBLE`.
- Select linked: is for F-curves channel only
- Select more/less: not yet implemented for grease pencil layers.
- Clean Keys, Sample, Extrapolation, Interpolation, Easing, and Handle
type change: work on Fcurve-channels only, so the
`ANIMFILTER_FCURVESONLY` filter is activated
Graying out these operators (when no fcurve keyframe is selected) can be
done with custom poll functions BUT may affect performance. This is NOT
done in this patch.
**Dopesheet Summary Selection:**
The main summary of the dopesheet now also takes into account Grease
Pencil keyframes, using some nasty copy/pasting of code, as explained
[on devtalk](https://devtalk.blender.org/t/gpencil-layers-integration-in-main-dopesheet-selection-issue/24527).
It works, but may be improved, providing some deeper changes.
Reviewed By: mendio, pepeland, sybren
Maniphest Tasks: T97477
Differential Revision: https://developer.blender.org/D15003
Add a new operator to the Graph Editor that blends selected keyframes
to their default value.
The operator can be accessed from
Key>Slider Operators>Blend To Default Value
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D9376
Ref: D9367
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
Use the ID.recalc flag to detect when updates after frame-change is
needed. Since comparing the last calculated frame doesn't take undo into
account (see code-comment for details).
`ID_RECALC_AUDIO_SEEK` has been renamed to `ID_RECALC_FRAME_CHANGE`
since this is not only related to audio however internally this flag is
still categorized in `NodeType::AUDIO`.
Reviewed By: sergey
Ref D13942
The Equalize Handles operator allows users to make selected handle
lengths uniform: either respecting their original angle from the key
control point or by flattening their angle (removing the overshoot
sometimes produced by certain handle types).
Design: T94172
Reviewed by: sybren
Differential Revision: https://developer.blender.org/D13702
This patch adds the breakdown (or tween) functionality to the graph editor.
The factor defines the linear interpolation from left key to right key.
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D9375
Ref: D9375
This patch adds the blend to neighbor operator to the Graph editor.
The operator acts like the blend to neighbor operator for a pose context, just working on keyframes.
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D9374
Ref: D9374
We already had the ability to bake fcurves but no way to convert the
baked result back without using python. This patch adds and operator
that is available now next to the bake operator in the drop down menu,
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D6379
Add operator to snap the 2D Cursor value to selected keyframes. This is
doing almost the same as the "Cursor to Selected" operator, except that
it doesn't affect the current frame, just the Y-coordinate (the value)
of the 2D cursor.
The "snap cursor" operators are added to the Key → Snap menu and to the
Snap pie menu. This means that these menus are now extended in meaning,
to not only mean "snap the selected keyframes to the cursor", but also
for some options "snap the cursor to selected keyframes".
This fixes T76596.
Both the MS headers and blender headers define the HKEY
which gives all kind of inclusion order issues.
This diff renames all *KEY constants to EVT_*KEY to resolve
this conflict.
Reviewed By: brecht , dfelinto
Differential Revision: http://developer.blender.org/D7164
The old convention was easy to confuse with ScrArea.
Part of https://developer.blender.org/T74432.
This is mostly a batch rename with some manual fixing. Only single word
variable names are changed, no prefixed/suffixed names.
Brecht van Lommel and Campbell Barton both gave me a green light for
this convention change.
Also ran clan clang format on affected files.
This change makes it so sound handles are created for evaluated scene,
sequencer and speakers. This allows to have properly evaluated animation
on them.
For the viewport playback sound uses regular dependency graph.
For the final render sound uses dependency graph created for render pipeline,
which now also contains sequencer and sound datablocks.
All the direct sound update calls are replaced with corresponding dependency
graph recalc tag.
This happened to be a bigger rabbit hole to hell than it originally seemed,
and there are higher priority design tasks to be handled (at this point high
priority design task is more important than high priority bug fix).
After talking to Brecht the decision was made to revert to the known isolated
issue, which will allow everyone in the studio work same as prior to last
Friday.
The remaining bits will be worked on after all the design tasks are out of
the way.
This commit reverts:
4cdb4b9532 Fix T64161: Crashing using undo and multiple windows
064273a4ae Sound: Port more cases to be a part of dependency graph
2e582f8ab5 Sound: Fix access wrong dependency graph
5fc49d9c91 Sound: add stubs to build without audaspace
c68c81a870 Sound: Make sure spin lock is initialized for new sound datablocks
c02534469a Sound: Delay creating sound scene handle for until is needed
9f681bea68 Fix T64144: Crash when displaying audio waveforms in VSE
2f79286453 Cleanup: unused vars
bed8ad6f95 Fix crash in background rendering after recent sound changes
773691310f Fix T64143: Crash when scrubbing in the graph editor
888852055c Sound: Fix for being unable to jump to a frame during playback with A/V sync
6ab7b38464 Sound: More fixes for access of original scene
35db119545 Sound: Fix access original scene during playback
211c4fd2e9 Depsgraph: Make comment about evaluation more obvious
c5fe16e121 Sound: Make sound handles only be in evaluated datablocks
b4e1e0946b Depsgraph: Preserve sound and audio pointers through copy-on-write
4eedf784b0 Depsgraph: Store original sequencer strip pointer
6990ef151c Sound: Move evaluation to dependency graph
d02da8de23 Sound: Delay opening handlers for until really needed
3369b82891 Depsgraph: Add scene audio component
e8f10d6475 Depsgraph: Tag sequencer for update on changes
6e4b7a6e4d Depsgraph: Initial work to cover sequencer
17447ac5a6 Depsgraph: Make sound ID part of the graph
Mainly covers RNA callbacks which were still doing direct scene update,
which was causing crashes. Now corresponding ID_RECALC flags are used,
so all scenes can update accordingly.
Also tested animated volume/pitch on strips, which now works as well.
Fixes T64133: Assert after changing FPS
Fixes T64154: Immediate crash when changing the current frame on the timeline
Fixes T64185: Client Crashes when the frame position value is changed
Fixes T64190: Blender Crash using Timeline Editor
Fixes T64128: Click to close bug type on timeline
Fixes T64147: Crash when setting current frame from Python
Fixes T64152: Blender Auto-Close on timeline change
- Move connected & projected into individual toggles.
- Top-level proportional editing button now only toggles.
- Use popover for proportional edit-mode falloff and options.
Note that it's no longer possible to toggle connected via key bindings,
although this could be supported again if it's needed.
Resolves T58081
Each space had separate operators, duplicating logic.
Use RNA properties instead so adding the ability to toggle other
region types (floating redo region for eg) doesn't need to have an
extra operator per space type.
It's also nicer to show a check-box for something which can be toggled.
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
For Blender builtin configurations the option to choose the select mouse remains
and is now also in the splash screen. It works by changing the keymap dynamically
in the script, rather than using special events.
The system of automatic switching of events was not flexible enough to deal with
side effects that require further keymap changes, so it is now under more manual
control in the script.
This breaks compatibility for some scripts and exported key configurations.
These can be fixed by replacing SELECTMOUSE, ACTIONMOUSE, EVT_TWEAK_S and
EVT_TWEAK_A with appropriate LEFTMOUSE, RIGHTMOUSE, EVT_TWEAK_L and
EVT_TWEAK_R events.
Other than that, there should be no functional changes.
This should be purely an implementation change,
for end users there should be no functional difference.
The entire key configuration is in one file with ~5000 lines of code.
Mostly avoiding code duplication and preserve comments and utility
functions from the C code.
It's a bit long but for searching and editing it's also convenient to
have it all in one file.
Notes:
- Actual keymap is shared by blender / blender_legacy
and stored in `keymap_data/blender_default.py`
This only generates JSON-like data to be passed into
`keyconfig_import_from_data`, allowing other presets to load and
manipulate the default keymap.
- Each preset defines 'keyconfig_data'
which can be shared between presets.
- Some of the utility functions for generating keymap items still
need to be ported over to Python.
- Some keymap items can be made into loops (marked as TODO).
See: D3907
* Proportional pie menu at shift+O.
* Snap pie menu at shift+S.
* Pivot pie menu at comma. Previous comma, ctrl+comma, period
and ctrl+period shortcuts for specific pivot types were removed.
Ref T56881.
Add tool options to control how select operates (add/sub/set/and/xor).
Note: edit mode armature select still needs to support all options,
this is complicated by how it handles partial end-point selection.
