The RenderResult struct still has a listbase of RenderLayer, but that's ok
since this is strictly for rendering.
* Subversion bump (to 2.80.2)
* DNA low level doversion (renames) - only for .blend created since 2.80 started
Note: We can't use DNA_struct_elem_find or get file version in init_structDNA,
so we are manually iterating over the array of the SDNA elements instead.
Note 2: This doversion change with renames can be reverted in a few months. But
so far it's required for 2.8 files created between October 2016 and now.
Reviewers: campbellbarton, sergey
Differential Revision: https://developer.blender.org/D2927
This patch moves all the functionality previously in SceneRenderLayer to SceneLayer.
If we want to rename some of these structs now would be a good time to do it, before they are in SceneLayer.
Everything should be working, though I will test things further tomorrow. Once this is committed depsgraph can get
rid of the workaround added in rna_Main_meshes_new_from_object and finish whatever this patch was preventing from being finished.
This patch also adds a few placeholders for the overrides (samples, ...). These are obviously not working, so some unittests that rely on 'lay', and 'zmask' will fail.
This patch does not addressed the change of moving samples to ViewRender (I have this as a separate patch and needs some separate discussion).
Following next is the individual note of the individual parts that were committed.
Note 1: It is up to Cycles to still get rid of exclude_layer internally.
Note 2: Cycles still need to handle its own doversion for the use_layer_samples cases and
(1) Remove the override as it is
(2) Add a new override (scene.cycles.samples) if scene.cycles.use_layer_samples != IGNORE
Respecting the expected behaviour when scene.cycles.use_layer_samples == BOUNDED.
Note 3: Cycles still need to implement the per-object holdout
(similar to how we do shadow catcher).
Note 4: There are parts of the old (Blender Internal) rendering pipeline that is still
using lay, e.g., in shi->lay.
Honestly it will be easier to purge the entire Blender Internal code away instead of taking things from it bit by bit.
Reviewers: sergey, campbellbarton, brecht
Differential Revision: https://developer.blender.org/D2919
The algorithm averages normals from nearby surfaces. It uses the same
sampling strategy as BSSRDFs, casting rays along the normal and two
orthogonal axes, and combining the samples with MIS.
The main concern here is that we are introducing raytracing inside
shader evaluation, which could be quite bad for GPU performance and
stack memory usage. In practice it doesn't seem so bad though.
Note that using this feature can easily slow down renders 20%, and
that if you care about performance then it's better to use a bevel
modifier. Mainly this is useful for baking, and for cases where the
mesh topology makes it difficult for the bevel modifier to work well.
Differential Revision: https://developer.blender.org/D2803
Engine is not stored in WorkSpaces. That defines the "context" engine, which
is used for the entire UI.
The engine used for the poll of nodes (add node menu, new nodes when "Use Nodes")
is obtained from context.
Introduce a ViewRender struct for viewport settings that are defined for
workspaces and scene. This struct will be populated with the hand-picked
settings that can be defined per workspace as per the 2.8 design.
* use_scene_settings
* properties editor: workshop + organize context path
Use Scene Settings
==================
For viewport drawing, Workspaces have an option to use the Scene render
settings (F12) instead of the viewport settings.
This way users can quickly preview the final render settings, engine and
View Layer. This will affect all the editors in that workspace, and it will be
clearly indicated in the top-bar.
Properties Editor: Add Workspace and organize context path
==========================================================
We now have the properties of:
Scene, Scene > Layer, Scene > World, Workspace
[Scene | Workspace] > Render Layer > Object
[Scene | Workspace] > Render Layer > Object > Data
(...)
Reviewers: Campbell Barton, Julian Eisel
Differential Revision: https://developer.blender.org/D2842
NODE_NEWER_SHADING was introduced in e868b459bb however it should have been
added as a bitflag.
BKE_scene_uses_blender_eevee() was used in gpu_shader_output() as a workaround
for compatibility being poorly used.
Anyways this fixes this situation. This is necessary for an upcoming patch, even
though this is considered temporary - since the other NODE_*_SHADING values are
legacy from Blender Internal drawing.
The is following: split copy on write update for node trees, and if we are only
tagging for uniform buffer update we skip whole datablock copy and only invoke
copy default_values form original nodetree to a copied one.
Thing which i'm not sure is: whether we need to use different branches in graph
itself to control such a conditional behavior, or whether we need to store tag
somewhere in the dependency graph. There are obviously cons and pros in both
approaches, and need to think about this. Maybe with more examples it becomes
more obvious which way is better.
This only fixes manual tweaks for now, animation support is coming.
Since we started supporting the (Cycles) Material Output old files
stopped working. There is no reason to keep the original Eevee material
otuput anymore.
It includes doversion for old files.
This will allow much finer controll over how we copy data-blocks, from
full copy in Main database, to "lighter" ones (out of Main, inside an
already allocated datablock, etc.).
This commit also transfers a llot of what was previously handled by
per-ID-type custom code to generic ID handling code in BKE_library.
Hopefully will avoid in future inconsistencies and missing bits we had
all over the codebase in the past.
It also adds missing copying handling for a few types, most notably
Scene (which where using a fully customized handling previously).
Note that the type of allocation used during copying (regular in Main,
allocated but outside of Main, or not allocated by ID handling code at
all) is stored in ID's, which allows to handle them correctly when
freeing. This needs to be taken care of with caution when doing 'weird'
unusual things with ID copying and/or allocation!
As a final note, while rather noisy, this commit will hopefully not
break too much existing branches, old 'API' has been kept for the main
part, as a wrapper around new code. Cleaning it up will happen later.
Design task : T51804
Phab Diff: D2714
This will allow much finer controll over how we copy data-blocks, from
full copy in Main database, to "lighter" ones (out of Main, inside an
already allocated datablock, etc.).
This commit also transfers a llot of what was previously handled by
per-ID-type custom code to generic ID handling code in BKE_library.
Hopefully will avoid in future inconsistencies and missing bits we had
all over the codebase in the past.
It also adds missing copying handling for a few types, most notably
Scene (which where using a fully customized handling previously).
Note that the type of allocation used during copying (regular in Main,
allocated but outside of Main, or not allocated by ID handling code at
all) is stored in ID's, which allows to handle them correctly when
freeing. This needs to be taken care of with caution when doing 'weird'
unusual things with ID copying and/or allocation!
As a final note, while rather noisy, this commit will hopefully not
break too much existing branches, old 'API' has been kept for the main
part, as a wrapper around new code. Cleaning it up will happen later.
Design task : T51804
Phab Diff: D2714
This makes the node menus aware of the Cycles/Eevee distinction, and
only show the relevant nodes for the current engine. Names have also
been changed to accomodate for the new output node system.
This makes Eevee consistent with Cycles, by having a single output node,
and multiple shader nodes that connect to it.
Note that node systems for Eevee saved before this will be missing the
output node, and thus will show an invalid material. This is easily
resolved by connecting the shader output to a new output node.
Noisy change, but safe, and better do it sooner than later if we are to
rework copying code. Also, previous commit shows this *is* useful to
catch some mistakes.
Previously, every RenderPass would have a bitfield that specified its type. That limits the number of passes to 32, which was reached a while ago.
However, most of the code already supported arbitrary RenderPasses since they were also used to store Multilayer EXR images.
Therefore, this commit completely removes the passflag from RenderPass and changes all code to use the unique pass name for identification.
Since Blender Internal relies on hardcoded passes and to preserve compatibility, 32 pass names are reserved for the old hardcoded passes.
To support these arbitrary passes, the Render Result compositor node now adds dynamic sockets. For compatibility, the old hardcoded sockets are always stored and just hidden when the corresponding pass isn't available.
To use these changes, the Render Engine API now includes a function that allows render engines to add arbitrary passes to the render result. To be able to add options for these passes, addons can now add their own properties to SceneRenderLayers.
To keep the compositor input node updated, render engine plugins have to implement a callback that registers all the passes that will be generated.
From a user perspective, nothing should change with this commit.
Differential Revision: https://developer.blender.org/D2443
Differential Revision: https://developer.blender.org/D2444
- Unify GPUMaterial creation (world/mesh).
- Support for multiple shader variations (not used for now).
- Convert GPUInputs to DRWUniforms to be used with the draw manager.
- Nodetree Update is not supported. The only way to refresh the shaders is to change render engine.
- Cleanup in GPUPass.
- Add new temporary Node Compatibility type. Compatibility types should be removed in the future.
commit 90778901c9
Merge: 76eebd93bf0026
Author: Schoen <schoepas@deher1m1598.emea.adsint.biz>
Date: Mon Apr 3 07:52:05 2017 +0200
Merge branch 'master' into cycles_disney_brdf
commit 76eebd9379
Author: Schoen <schoepas@deher1m1598.emea.adsint.biz>
Date: Thu Mar 30 15:34:20 2017 +0200
Updated copyright for the new files.
commit 013f4a152a
Author: Schoen <schoepas@deher1m1598.emea.adsint.biz>
Date: Thu Mar 30 15:32:55 2017 +0200
Switched from multiplication of base and subsurface color to blending
between them using the subsurface parameter.
commit 482ec5d1f2
Author: Schoen <schoepas@deher1m1598.emea.adsint.biz>
Date: Mon Mar 13 15:47:12 2017 +0100
Fixed a bug that caused an additional white diffuse closure call when using
path tracing.
commit 26e906d162
Merge: 0593b8c223aff9
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon Feb 6 11:32:31 2017 +0100
Merge branch 'master' into cycles_disney_brdf
commit 0593b8c51b
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon Feb 6 11:30:36 2017 +0100
Fixed the broken GLSL shader and implemented the Disney BRDF in the
real-time view port.
commit 8c7e11423b
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Fri Feb 3 14:24:05 2017 +0100
Fix to comply strict compiler flags and some code cleanup
commit 17724e9d2d
Merge: 379ba34520afa2
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue Jan 24 09:59:58 2017 +0100
Merge branch 'master' into cycles_disney_brdf
commit 379ba346b0
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue Jan 24 09:28:56 2017 +0100
Renamed the Disney BSDF to Principled BSDF.
commit f80dcb4f34
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Fri Dec 2 13:55:12 2016 +0100
Removed reflection call when roughness is low because of artifacts.
commit 732db8a57f
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Wed Nov 16 09:22:25 2016 +0100
Indication if to use fresnel is now handled via the type of the BSDF.
commit 0103659f5e
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Fri Nov 11 13:04:11 2016 +0100
Fixed an error in the clearcoat where it appeared too bright for default
light sources (like directional lights)
commit 0aa68f5335
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon Nov 7 12:04:38 2016 +0100
Resolved inconsistencies in using tabs and spaces
commit f5897a9494
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon Nov 7 08:13:41 2016 +0100
Improved the clearcoat part by using GTR1 instead of GTR2
commit 3dfc240e61
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon Oct 31 11:31:36 2016 +0100
Use reflection BSDF for glossy reflections when roughness is 0.0 to
reduce computational expense and some code cleanup
Code cleanup includes:
- Code style cleanup and removed unused code
- Consolidated code in the bsdf_microfacet_multi_impl.h to reduce
some computational expense
commit a2dd0c5faf
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Wed Oct 26 08:51:10 2016 +0200
Fixed glossy reflections and refractions for low roughness values and
cleaned up the code.
For low roughness values, the reflections had some strange behavior.
commit 9817375912
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue Oct 25 12:37:40 2016 +0200
Removed default values in setup functions and added extra functions for
GGX with fresnel.
commit bbc5d9d452
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue Oct 25 11:09:36 2016 +0200
Switched from uniform to cosine hemisphere sampling for the diffuse and
the sheen part.
commit d52d8f2813
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon Oct 24 16:17:13 2016 +0200
Removed the color parameters from the diffuse and sheen shader and use
them as closure weights instead.
commit 8f3d927385
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon Oct 24 09:57:06 2016 +0200
Fixed the issue with artifacts when using anisotropy without linking the
tangent input to a tangent node.
commit d93f680db9
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon Oct 24 09:14:51 2016 +0200
Added subsurface radius parameter to control the per color channel
effection radius of the subsurface scattering.
commit c708c3e53b
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon Oct 24 08:14:10 2016 +0200
Rearranged the inputs of the shader.
commit dfbfff9c38
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Fri Oct 21 09:27:05 2016 +0200
Put spaces in the parameter names of the shader node
commit e5a748ced1
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Fri Oct 21 08:51:20 2016 +0200
Removed code that isn't in use anymore
commit 75992bebc1
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Fri Oct 21 08:50:07 2016 +0200
Code style cleanup
commit 4dfcf455f7
Merge: 243a0e32cd6a89
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Thu Oct 20 10:41:50 2016 +0200
Merge branch 'master' into cycles_disney_brdf
commit 243a0e3eb8
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Thu Oct 20 10:01:45 2016 +0200
Switching between OSL and SVM is more consistant now when using Disney
BSDF.
There were some minor differences in the OSL implementation, e.g. the
refraction roughness was missing.
commit 2a5ac50922
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue Sep 27 09:17:57 2016 +0200
Fixed a bug that caused transparency to be always white when using OSL and
selecting GGX as distribution of the Disney BSDF
commit e1fa862391
Merge: d0530a87f76f6f
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue Sep 27 08:59:32 2016 +0200
Merge branch 'master' into cycles_disney_brdf
commit d0530a8af0
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue Sep 27 08:53:18 2016 +0200
Cleanup the Disney BSDF implementation and removing unneeded files.
commit 3f4fc826bd
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue Sep 27 08:36:07 2016 +0200
Unified the OSL implementation of the Disney clearcoat as a simple
microfacet shader like it was previously done in SVM
commit 4d3a0032ec
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon Sep 26 12:35:36 2016 +0200
Enhanced performance for Disney materials without subsurface scattering
commit 3cd5eb56cf
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Fri Sep 16 08:47:56 2016 +0200
Fixed a bug in the Disney BSDF that caused specular reflections to be too
bright and diffuse is now reacting to the roughness again
- A normalization for the fresnel was missing which caused the specular
reflections to become too bright for the single-scatter GGX
- The roughness value for the diffuse BSSRDF part has always been
overwritten and thus always 0
- Also the performance for refractive materials with roughness=0.0 has
been improved
commit 7cb37d7119
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Thu Sep 8 12:24:43 2016 +0200
Added selection field to the Disney BSDF node for switching between
"Multiscatter GGX" and "GGX"
In the "GGX" mode there is an additional parameter for changing the
refraction roughness for materials with smooth surfaces and rough interns
(e.g. honey). With the "Multiscatter GGX" this effect can't be produced at
the moment and so here will be no separation of the two roughness values.
commit cdd29d06bb
Merge: 02c315ab40d1c1
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue Sep 6 15:59:05 2016 +0200
Merge branch 'master' into cycles_disney_brdf
commit 02c315aeb0
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue Sep 6 15:16:09 2016 +0200
Implemented the OSL part of the Disney shader
commit 5f880293ae
Merge: 630b80eb399a6d
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Fri Sep 2 10:53:36 2016 +0200
Merge branch 'master' into cycles_disney_brdf
commit 630b80e08b
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Fri Sep 2 10:52:13 2016 +0200
Fresnel in the microfacet multiscatter implementation improved
commit 0d9f4d7acb
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Fri Aug 26 11:11:05 2016 +0200
Fixed refraction roughness problem (refractions were always 100% rough)
and set IOR of clearcoat to 1.5
commit 9eed34c7d9
Merge: ef29aaeae475e3
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue Aug 16 15:22:32 2016 +0200
Merge branch 'master' into cycles_disney_brdf
commit ef29aaee1a
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue Aug 16 15:17:12 2016 +0200
Implemented the fresnel in the multi-scatter GGX for the Disney BSDF
- The specular/metallic part uses the multi-scatter GGX
- The fresnel of the metallic part is controlled by the specular value
- The color of the reflection part when using transparency can be
controlled by the specularTint value
commit 88567af085
Merge: cc267e5285e082
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Wed Aug 3 15:05:09 2016 +0200
Merge branch 'master' into cycles_disney_brdf
commit cc267e52f2
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Wed Aug 3 15:00:25 2016 +0200
Implemented the Disney clearcoat as a variation of the microfacet bsdf,
removed the transparency roughness again and added an input for
anisotropic rotations
commit 81f6c06b1f
Merge: ece5a087065022
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Wed Aug 3 11:42:02 2016 +0200
Merge branch 'master' into cycles_disney_brdf
commit ece5a08e0d
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue Jul 26 16:29:21 2016 +0200
Base color now applied again to the refraction of transparent Disney
materials
commit e3aff6849e
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue Jul 26 16:05:19 2016 +0200
Added subsurface color parameter to the Disney shader
commit b3ca6d8a2f
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue Jul 26 12:30:25 2016 +0200
Improvement of the SSS in the Disney shader
* Now the bump normal is correctly used for the SSS.
* SSS in Disney uses the Disney diffuse shader
commit d68729300e
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue Jul 26 12:23:13 2016 +0200
Better calculation of the Disney diffuse part
Now the values for NdotL und NdotV are clamped to 0.0f for a better look
when using normal maps
commit cb6e500b12
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon Jul 25 16:26:42 2016 +0200
Now one can disable specular reflactions again by setting specular and
metallic to 0 (cracked this in the previous commit)
commit bfb9cb11b5
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon Jul 25 16:11:07 2016 +0200
fixed the Disney SSS and cleaned the initialization of the Disney shaders
commit 642c0fdad1
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon Jul 25 16:09:55 2016 +0200
fixed an error that was caused by the missing LABEL_REFLECT in the Disney
diffuse shader
commit c10b484dca
Author: Jens Verwiebe <info@jensverwiebe.de>
Date: Fri Jul 22 01:15:21 2016 +0200
Rollback attempt to fix sss crashing, it prevented crash by disabling sss completely, thus useless
commit 462bba3f97
Author: Jens Verwiebe <info@jensverwiebe.de>
Date: Thu Jul 21 23:11:59 2016 +0200
Add an undef for sc_next for safety
commit 32d348577d
Author: Jens Verwiebe <info@jensverwiebe.de>
Date: Thu Jul 21 00:15:48 2016 +0200
Attempt to fix Disney SSS
commit dbad91ca6d
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Wed Jul 20 11:13:00 2016 +0200
Added a roughness parameter for refractions (for scattering of the rays
within an object)
With this, one can create a translucent material with a smooth surface and
with a milky look.
The final refraction roughness has to be calculated using the surface
roughness and the refraction roughness because those two are correlated
for refractions. If a ray hits a rough surface of a translucent material,
it is scattered while entering the surface. Then it is scattered further
within the object. The calculation I'm using is the following:
RefrRoughnessFinal = 1.0 - (1.0 - Roughness) * (1.0 - RefrRoughness)
commit 50ea5e3e34
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue Jun 7 10:24:50 2016 +0200
Disney BSDF is now supporting CUDA
commit 10974cc826
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue May 31 11:18:07 2016 +0200
Added parameters IOR and Transparency for refractions
With this, the Disney BRDF/BSSRDF is extended by the BTDF part.
commit 218202c090
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon May 30 15:08:18 2016 +0200
Added an additional normal for the clearcoat
With this normal one can simulate a thin layer of clearcoat by applying a
smoother normal map than the original to this input
commit dd139ead7e
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon May 30 12:40:56 2016 +0200
Switched to the improved subsurface scattering from Christensen and
Burley
commit 11160fa4e1
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon May 30 10:16:30 2016 +0200
Added Disney Sheen shader as a preparation to get to a BSSRDF
commit cee4fe0cc9
Merge: 4f955d06b5bab6
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon May 30 09:08:09 2016 +0200
Merge branch 'cycles_disney_brdf' of git.blender.org:blender into cycles_disney_brdf
Conflicts:
intern/cycles/kernel/closure/bsdf_disney_clearcoat.h
intern/cycles/kernel/closure/bsdf_disney_diffuse.h
intern/cycles/kernel/closure/bsdf_disney_specular.h
intern/cycles/kernel/closure/bsdf_util.h
intern/cycles/kernel/osl/CMakeLists.txt
intern/cycles/kernel/osl/bsdf_disney_clearcoat.cpp
intern/cycles/kernel/osl/bsdf_disney_diffuse.cpp
intern/cycles/kernel/osl/bsdf_disney_specular.cpp
intern/cycles/kernel/osl/osl_closures.h
intern/cycles/kernel/shaders/node_disney_bsdf.osl
intern/cycles/render/nodes.cpp
intern/cycles/render/nodes.h
commit 4f955d0523
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue May 24 16:38:23 2016 +0200
SVM and OSL are both working for the simple version of the Disney BRDF
commit 1f5c41874b
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue May 24 09:58:50 2016 +0200
Disney node can be used without SVM and started to cleanup the OSL implementation
There is still some wrong behavior for SVM for the Schlick Fresnel part at the
specular and clearcoat
commit d4b814e930
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Wed May 18 10:22:29 2016 +0200
Switched from a parameter struct for Disney parameters to ShaderClosure params
commit b86a1f5ba5
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Wed May 18 10:19:57 2016 +0200
Added additional variables for storing parameters in the ShaderClosure struct
commit 585b886236
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue May 17 12:03:17 2016 +0200
added output parameter to the DisneyBsdfNode
That has been forgotten after removing the inheritance of BsdfNode
commit f91a286398
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue May 17 10:40:48 2016 +0200
removed BsdfNode class inheritance for DisneyBsdfNode
That's due to a naming difference. The Disney BSDF uses the name 'Base Color'
while the BsdfNode had a 'Color' input. That caused a text message to be
printed while rendering.
commit 30da91c9c5
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Wed May 4 16:08:10 2016 +0200
disney implementation cleaned
commit 30d41da0f0
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Wed May 4 13:23:07 2016 +0200
added the disney brdf as a shader node
commit 1f099fce24
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue May 3 16:54:49 2016 +0200
added clearcoat implementation
commit 00a1378b98
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Fri Apr 29 22:56:49 2016 +0200
disney diffuse und specular implemented
commit 6baa7a7eb7
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon Apr 18 15:21:32 2016 +0200
disney diffuse is working correctly
commit d8fa169bf3
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon Apr 18 08:41:53 2016 +0200
added vessel for disney diffuse shader
commit 6b5bab6cec
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Wed May 18 10:22:29 2016 +0200
Switched from a parameter struct for Disney parameters to ShaderClosure params
commit f6499c2676
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Wed May 18 10:19:57 2016 +0200
Added additional variables for storing parameters in the ShaderClosure struct
commit 7100640b65
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue May 17 12:03:17 2016 +0200
added output parameter to the DisneyBsdfNode
That has been forgotten after removing the inheritance of BsdfNode
commit 419ee54411
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue May 17 10:40:48 2016 +0200
removed BsdfNode class inheritance for DisneyBsdfNode
That's due to a naming difference. The Disney BSDF uses the name 'Base Color'
while the BsdfNode had a 'Color' input. That caused a text message to be
printed while rendering.
commit 6006f91e87
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Wed May 4 16:08:10 2016 +0200
disney implementation cleaned
commit 0ed0895914
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Wed May 4 13:23:07 2016 +0200
added the disney brdf as a shader node
commit 0630b742d7
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue May 3 16:54:49 2016 +0200
added clearcoat implementation
commit 9f3d39744b
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Fri Apr 29 22:56:49 2016 +0200
disney diffuse und specular implemented
commit 9b26206376
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon Apr 18 15:21:32 2016 +0200
disney diffuse is working correctly
commit 4711a3927d
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon Apr 18 08:41:53 2016 +0200
added vessel for disney diffuse shader
Differential Revision: https://developer.blender.org/D2313
Ideally we need to find a way to remove such a static limit here, but it's not so
trivial to implement for texture nodes. Requires some bigger system redesign there.
Just raising limit for now, which is fine for modern systems.
Design Documents
----------------
* https://wiki.blender.org/index.php/Dev:2.8/Source/Layers
* https://wiki.blender.org/index.php/Dev:2.8/Source/DataDesignRevised
User Commit Log
---------------
* New Layer and Collection system to replace render layers and viewport layers.
* A layer is a set of collections of objects (and their drawing options) required for specific tasks.
* A collection is a set of objects, equivalent of the old layers in Blender. A collection can be shared across multiple layers.
* All Scenes have a master collection that all other collections are children of.
* New collection "context" tab (in Properties Editor)
* New temporary viewport "collections" panel to control per-collection
visibility
Missing User Features
---------------------
* Collection "Filter"
Option to add objects based on their names
* Collection Manager operators
The existing buttons are placeholders
* Collection Manager drawing
The editor main region is empty
* Collection Override
* Per-Collection engine settings
This will come as a separate commit, as part of the clay-engine branch
Dev Commit Log
--------------
* New DNA file (DNA_layer_types.h) with the new structs
We are replacing Base by a new extended Base while keeping it backward
compatible with some legacy settings (i.e., lay, flag_legacy).
Renamed all Base to BaseLegacy to make it clear the areas of code that
still need to be converted
Note: manual changes were required on - deg_builder_nodes.h, rna_object.c, KX_Light.cpp
* Unittesting for main syncronization requirements
- read, write, add/copy/remove objects, copy scene, collection
link/unlinking, context)
* New Editor: Collection Manager
Based on patch by Julian Eisel
This is extracted from the layer-manager branch. With the following changes:
- Renamed references of layer manager to collections manager
- I doesn't include the editors/space_collections/ draw and util files
- The drawing code itself will be implemented separately by Julian
* Base / Object:
A little note about them. Original Blender code would try to keep them
in sync through the code, juggling flags back and forth. This will now
be handled by Depsgraph, keeping Object and Bases more separated
throughout the non-rendering code.
Scene.base is being cleared in doversion, and the old viewport drawing
code was poorly converted to use the new bases while the new viewport
code doesn't get merged and replace the old one.
Python API Changes
------------------
```
- scene.layers
+ # no longer exists
- scene.objects
+ scene.scene_layers.active.objects
- scene.objects.active
+ scene.render_layers.active.objects.active
- bpy.context.scene.objects.link()
+ bpy.context.scene_collection.objects.link()
- bpy_extras.object_utils.object_data_add(context, obdata, operator=None, use_active_layer=True, name=None)
+ bpy_extras.object_utils.object_data_add(context, obdata, operator=None, name=None)
- bpy.context.object.select
+ bpy.context.object.select = True
+ bpy.context.object.select = False
+ bpy.context.object.select_get()
+ bpy.context.object.select_set(action='SELECT')
+ bpy.context.object.select_set(action='DESELECT')
-AddObjectHelper.layers
+ # no longer exists
```
Turns out most BKE_foo_make_local datablock-specific functions are actually doing
exactly the same thing, only two currently need special additional operations
(object and brush ones). So added a BKE_id_make_local_generic instead
of copying same code over and over.
Also, changed a bit how make_local works in case we are localizing a whole library.
We need to do the 'remap' step (from old linked ID to new local one) in the second loop,
otherwise we miss some dependencies. This fixes main part of T48907.
This commit changes a lot of how IDs are handled internally, especially the unlinking/freeing
processes. So far, this was very fuzy, to summarize cleanly deleting or replacing a datablock
was pretty much impossible, except for a few special cases.
Also, unlinking was handled by each datatype, in a rather messy and prone-to-errors way (quite
a few ID usages were missed or wrongly handled that way).
One of the main goal of id-remap branch was to cleanup this, and fatorize ID links handling
by using library_query utils to allow generic handling of those, which is now the case
(now, generic ID links handling is only "knwon" from readfile.c and library_query.c).
This commit also adds backends to allow live replacement and deletion of datablocks in Blender
(so-called 'remapping' process, where we replace all usages of a given ID pointer by a new one,
or NULL one in case of unlinking).
This will allow nice new features, like ability to easily reload or relocate libraries, real immediate
deletion of datablocks in blender, replacement of one datablock by another, etc.
Some of those are for next commits.
A word of warning: this commit is highly risky, because it affects potentially a lot in Blender core.
Though it was tested rather deeply, being totally impossible to check all possible ID usage cases,
it's likely there are some remaining issues and bugs in new code... Please report them! ;)
Review task: D2027 (https://developer.blender.org/D2027).
Reviewed by campbellbarton, thanks a bunch.
Nodes have a feature for moving existing links to unoccupied sockets when connecting
to an already used input. This is based on the standard legacy socket types (value/float,
vector, color/rgba) and works reasonably well for shader, compositor and texture nodes.
For new pynode systems, however, the hardcoded nature of that feature has major drawbacks:
* It does not take different type systems into account, leading to meaningless connections
when sockets are swapped and making the feature useless or outright debilitating.
* Advanced socket behaviors would be possible with a registerable callback, e.g. creating
extensible input lists that move existing connections down to make room for a new link.
Now any handling of new links is done via the 'insert_links' callback, which can also be
registered through the RNA API. For the legacy shader/compo/tex nodes the behavior is the
same, using a C callback.
Note on the 'use_swap' flag: this has been removed because it was meaningless anyway:
It was disabled only for the insert-node-on-link feature, which works only for
completely unconnected nodes anyway, so there would be nothing to swap in the first place.
Idea is, instead of ignoring completely missing linked datablocks, to
create void placeholders for them.
That way, you can work on your file, save it, and find again your missing data once
lib becomes available again. Or you can edit missing lib's path (in Outliner),
save and reload the file, and you are done.
Also, Outliner now shows broken libraries (and placeholders) with a 'broken lib' icon.
Future plans are also to be able to relocate missing libs and reload them at runtime.
Code notes:
- Placeholder ID is just a regular datablock of same type as expected linked one,
with 'default' data, and a LIB_MISSING bitflag set.
- To allow creation of such datablocks, creation of datablocks in BKE was split in two step:
+ Allocation of memory itself.
+ Setting of all internal data to default values.
See also the design task (T43351).
Reviewed by @campbellbarton, thanks a bunch!
Differential Revision: https://developer.blender.org/D1394
Needed for node insert offset (Auto-offset in UI), but kept separate so people notice it without having to check insert offset commit (not for commit ratio of course ;) )
Currently only works correct with single float output, RGBA and vector are not
supported so if one need to use this passes he'll need to wait a bit still.
It is coming, don't worry.
This commit implements point density texture for Cycles shading nodes.
It's done via creating voxel texture at shader compilation time, Not
totally memory efficient, but avoids adding sampling code to kernel
(which keeps render time as low as possible), In the future this will
be compensated by using OpenVDB for more efficient storage of sparse
volume data.
Sampling of the voxel texture is happening at blender side and the
same code is used as for Blender Internal's renderer.
This texture is controlled by only object, particle system and radius.
Linear falloff is used and there's no turbulence. This is because
falloff is expected to happen using Curve Mapping node. Turbulence
will be done as a distortion on the input coordinate. It's already
possible to fake it using nose textures and in the future we can add
more proper turbulence distortion node, which then could also be used
for 2D texture mapping.
Particle color support is done by Lukas, thanks!
Official Documentation:
http://www.blender.org/manual/render/workflows/multiview.html
Implemented Features
====================
Builtin Stereo Camera
* Convergence Mode
* Interocular Distance
* Convergence Distance
* Pivot Mode
Viewport
* Cameras
* Plane
* Volume
Compositor
* View Switch Node
* Image Node Multi-View OpenEXR support
Sequencer
* Image/Movie Strips 'Use Multiview'
UV/Image Editor
* Option to see Multi-View images in Stereo-3D or its individual images
* Save/Open Multi-View (OpenEXR, Stereo3D, individual views) images
I/O
* Save/Open Multi-View (OpenEXR, Stereo3D, individual views) images
Scene Render Views
* Ability to have an arbitrary number of views in the scene
Missing Bits
============
First rule of Multi-View bug report: If something is not working as it should *when Views is off* this is a severe bug, do mention this in the report.
Second rule is, if something works *when Views is off* but doesn't (or crashes) when *Views is on*, this is a important bug. Do mention this in the report.
Everything else is likely small todos, and may wait until we are sure none of the above is happening.
Apart from that there are those known issues:
* Compositor Image Node poorly working for Multi-View OpenEXR
(this was working prefectly before the 'Use Multi-View' functionality)
* Selecting camera from Multi-View when looking from camera is problematic
* Animation Playback (ctrl+F11) doesn't support stereo formats
* Wrong filepath when trying to play back animated scene
* Viewport Rendering doesn't support Multi-View
* Overscan Rendering
* Fullscreen display modes need to warn the user
* Object copy should be aware of views suffix
Acknowledgments
===============
* Francesco Siddi for the help with the original feature specs and design
* Brecht Van Lommel for the original review of the code and design early on
* Blender Foundation for the Development Fund to support the project wrap up
Final patch reviewers:
* Antony Riakiotakis (psy-fi)
* Campbell Barton (ideasman42)
* Julian Eisel (Severin)
* Sergey Sharybin (nazgul)
* Thomas Dinged (dingto)
Code contributors of the original branch in github:
* Alexey Akishin
* Gabriel Caraballo
