In order to avoid losing information, it sometimes makes sense for the
output attribute type to depend on the types of the input attributes.
Such a function already exists, `attribute_data_type_highest_complexity`,
it just needs to be used in a few more places. The change for the attribute
compare node is just so the code there uses the same code style as in the
attribute mix node.
Addresses part of T83793
Differential Revision: https://developer.blender.org/D10099
- Add operators that previously could only be found in panels
- Re order menus to match other menus
- Organize Code
|Before|After|
|{F9493583}|{F9493584}|
|{F9493585}|{F9493586}|
|{F9493588}|{F9493590}|
|{F9493591}|{F9493592}|
Reviewed By: sergey, sebastian_k, #motion_tracking
Differential Revision: https://developer.blender.org/D9781
The root of the issue was caused by the dependency graph using ID pointer
to map evaluated state from old depsgraph to new one upon relations update.
This was failing when IDs were re-allocated rapidly: was possible that
Object ID's evaluated state assigned to Mesh and vice versa.
Now depsgraph uses Session UUID to identify which IDs to restore evaluated
state to. The session UUID is stored in the IDNode, so that id_orig is not
dereferenced on depsgraph update since the ID might be freed.
The root of the issue is identified by Campbell, original patch was done
by Bastien, thanks! Also thanks to Oliver and Ray and everyone else for
testing!
This change will try to add meta data when using a multilayered open
exr file output node in the compositor. It adds the current scene meta
data and converts existing cryptomatte keys so it follows the
naming that is configured in the file output node.
This change supports the basic use-case where the compositor is
used to output cryptomatte layers with a different naming scheme to
support external compositors. In this case the Multilayered OpenEXR
files are used and the meta data is read from the render result.
Meta data is found when render layer node is connected with the
file output node without any other nodes in between. Redirects and empty
node groups are allowed.
The patch has been verified to work with external compositors.
See https://devtalk.blender.org/t/making-sense-of-cryptomatte-usage-in-third-party-programs/16576/17
See patch for example files.
Reviewed By: Sergey Sharybin
Differential Revision: https://developer.blender.org/D10016
Fix keyframe properties not being editable when animating a
library-overridden datablock.
The problem was that RNA pointers were created based on the datablock
affected by the animation (for example an Object), instead of the
datablock that contains the FCurve itself (the Action). The latter can
be local to the current blend file and should thus be editable, even
when the former is not.
Reviewed By: mont29
Maniphest Tasks: T81965
Differential Revision: https://developer.blender.org/D10091
Without this, additional items could be added in the future
which wouldn't be included in the check.
Move the check out of the loop since this is such an unlikely
situation that checking every iteration isn't needed.
Also remove redundant casts.
This adds a new Align Rotation to Vector node based on the mockup
in T83669.
Reviewers: HooglyBoogly, simonthommes
Differential Revision: https://developer.blender.org/D10081
Previously, the span returned by `WriteAttribute`s might not contain the
current value of the attribute for performance reasons. To avoid some
bugs, the span now always contains the old values (they might have to
be copied over from the internal storage, dependending on how the
attribute is stored).
The old behavior is still available with the `get_span_for_write_only`
method. The span that it returns might not contain the current
attribute values. Therefore, it should only be used when you want
to overwrite an attribute without looking at the old values.
When painting using Auto-Normalize or Lock Relative with some
groups locked, the locked weights may not add up precisely to
1 because of precision limitations, which results in creating
nonzero weights close to FLT_EPSILON. With Lock Relative display
mode this is very obvious and annoying (random red points amid
black or blue), so add an epsilon check to consider less than
1e-6 unlocked weight to be the same as 0.
In addition, in cases when no weight can be painted due to locks,
don't create vertex group entries at all if they don't exist yet.
Also, don't run Auto Normalize when not painting a deform group.
Differential Revision: https://developer.blender.org/D10000
The function `rna_Particle_uv_on_emitter` did not handle the case where
`particle->num_dmcache` was `DMCACHE_ISCHILD`. This resulted in an
incorrect offset for the `mtface` pointer. The commit checks for the
case and sets the offset accordingly, similar to existing code in
e.g. `particle_calculate_parent_uvs`.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10072
The Bmesh from_object method applies modifiers twice when the input
deform is enabled and the input depsgraph is a render one.
The evaluated object already have modifiers applied, and
mesh_create_eval_final() applies modifiers again. To fix this, the
BKE_mesh_new_from_object() function is used instead.
Reviewed By: Brecht
Differential Revision: https://developer.blender.org/D10053
* Simplify and clarify logic in `BKE_undosys_step_undo/redo_with_data_ex`,
by adding early return on invalid situations, renaming some variables,
and adding comments.
* Add more sanity checks in those functions.
No behavioral change are expected here, besides in potential edge-case,
invalid situations.
This is a preliminary change, before some deeper modifications of
`BKE_undosys` undo/redo API.
Differential Revision: https://developer.blender.org/D10033
This means that NVIDIA driver version 450 or newer is now required for Cycles
OptiX rendering. This upgrade is required to take advantage of new features and
improvements.
Ref T81431
The Surface -> Nurbs Curve behaves now like the Curve -> Nurbs Curve,
if you initially select less than all points. So, multiple points can
be selected and extruded which just moves the selected points similar
to Curve -> Nurbs Curve object.
Differential Revision: https://developer.blender.org/D9934
linked obdata) fail
Caused by rB1a650fdcb286.
Above commit made polling more restricitive in that it did not allow for
actions on material slots (linked to object, not object data) on objects
with liked object data. This should be allowed though.
Maniphest Tasks: T84593
https://developer.blender.org/D10078
None of these changes should be visible, but the files were somehow
out of sync with the blend file, so they need to be updated to reflect
those changes.
In my testing this works, but it requires me to remove the min(start_sample...) part in the
adaptive sampling kernel, and I assume there's a reason why it was there?
Reviewed By: brecht
Maniphest Tasks: T82351
Differential Revision: https://developer.blender.org/D9445
Also send mouse move event instead of moving cursor via SetCursorPos.
SetCursorPos did not reliably move the mouse when it is leaving the
window quickly.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D9981
This patch implements the same operations and interface as the regular
vector math node, but it runs for every element of the attribute. This
should expand what's possible with geometry nodes quite a bit.
Differential Revision: https://developer.blender.org/D9914
This patch makes the point distribute node write to the "rotation"
attribute with the normal of each face at each distributed point.
The "normal" attribute is also created with the triangle normal
at each point.
The conversion from the triangle normal to an Euler rotation is somewhat
arbitrary, since we only have one direction vector. For a more flexible
rotation for each point, the "Align Rotation to Vector" node can be used
in the future.
Differential Revision: https://developer.blender.org/D9965
Root of the issue is that `BKE_object_eval_boundbox` (that ports back
evaluated bbox to orig object during active depsgraph evaluation) is
only called when object's geometry actually is evaluated.
However, with new undo, often Object itself can be changed by undo,
without requiring its geometry to be re-evaluated, which was leading to
the evaluated bbox not being copied back into orig object anymore.
Fixing that by moving bbox copying-to-orig code into
`BKE_object_sync_to_original` instead, which is always executed when
object is evaluated (as hinted by the comment above
`BKE_object_eval_boundbox` actually).
Also allows to cleanup code for armature eval, apparently.
Maniphest Tasks: T83422
Differential Revision: https://developer.blender.org/D9789
This can be useful as a workaround on the boundary with the pinned
vertices in some situations among other things, and completely copies
the existing design of the self collision vertex group setting.
Differential Revision: https://developer.blender.org/D10043
The `object.collision.use` flag was treated as a redundant marker
of the existence of the modifier, going as far as adding/removing
it when the value was changed, which is not actually very useful.
Removing the modifier loses its position in the stack, and requires
a dependency graph rebuild. It feels it may be a legacy flag?
What would be useful however is the ability to toggle collisions
dynamically without removing the modifier. This patch adjusts the
code to keep the modifier when the flag is disabled, and add it
if it doesn't exist when the flag is enabled. The modifier now
checks the flag at the start and quickly exits after cleaning
up stale data. The redesigned setting is exposed in the UI.
Collisions can't be disabled by simply using the modifier enable
flags because the modifier merely saves a snapshot of the mesh at
a certain point of the modifier stack for other objects to use,
and thus has to be able to clear the stale data.
Differential Revision: https://developer.blender.org/D10064
Handle return value of `fread()` by printing an error and closing the
file when it cannot be read from. Not only is error handing a good idea,
it also prevents GCC from warning that the return value of `fread()`
should not be ignored:
```
.../blender/source/blender/imbuf/intern/indexer.c: In function ‘IMB_indexer_open’:
.../blender/source/blender/imbuf/intern/indexer.c:201:5: warning: ignoring return value of ‘fread’, declared with attribute warn_unused_result [-Wunused-result]
201 | fread(&idx->entries[i].frameno, sizeof(int), 1, fp);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.../blender/source/blender/imbuf/intern/indexer.c:202:5: warning: ignoring return value of ‘fread’, declared with attribute warn_unused_result [-Wunused-result]
202 | fread(&idx->entries[i].seek_pos, sizeof(unsigned long long), 1, fp);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.../blender/source/blender/imbuf/intern/indexer.c:203:5: warning: ignoring return value of ‘fread’, declared with attribute warn_unused_result [-Wunused-result]
203 | fread(&idx->entries[i].seek_pos_dts, sizeof(unsigned long long), 1, fp);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.../blender/source/blender/imbuf/intern/indexer.c:204:5: warning: ignoring return value of ‘fread’, declared with attribute warn_unused_result [-Wunused-result]
204 | fread(&idx->entries[i].pts, sizeof(unsigned long long), 1, fp);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
```
Differential Revision: https://developer.blender.org/D9916
Reviewed by: campbellbarton
Previous code would not generate a session uuid for embedded IDs (like
root node trees or master collections). While this is not a problem
currently since those are not directly stored in Main data-base, this is
conceptually wrong, since those IDs still pertain the Main data.
Further more, this is blocking using `session_uuid` more in depsgraph in
place from ID pointer itself, as identifier (related to T84397).
No ID (even remotely) related to Main database should ever be created
directly through MEM_mallocN. Using `BKE_libblock_alloc` is the bare
minimum.
Note that there is no behavior change expected here.
Selecting vertices and faces first checked edge selection,
this was called to set vert1 & vert2 variables which have since been
removed.
These calls should have been removed in
51f04bf7b8.
Exposed by recent commit 246efd7286
Although this was an existing logical error causing
`uv_find_nearest_face` to only work properly when the hit distance was
initialized to FLT_MAX, which wasn't the case in multi-object edit mode.
If a node was closed in the hierarchy, we would only copy that node,
even if child nodes were selected.
Reviewed By: brecht, mont29
Maniphest Tasks: T84327
Differential Revision: https://developer.blender.org/D9995
Previously raw images were not cached if image wasn't preprocessed.
This caused issue, that image had to be read from disk on every redraw.
Effect strips must be excluded, because this would cause problem with
invalidation. Effect strips can use preprocessing however. This is
mainly to allow usimg modifiers on them.
This change should follow rBf448ff2afe7a77, but I have wrongly assumed,
that it has been implemented already.
ref T80278
Group all tests of a test suite into a single test command invocation.
This reduces the number of invocations by `ctest` by an order of
magnitude.
Since rB56aa5b0d8c6b663, `bin/tests/blender_test` was run for every
individual test. Having over a 1000 tests made testing slower than
necessary. Individual tests can still be run if desired by invocation of
`bin/tests/blender_test --gtest_filter=suitename.testname`.
NOTE: For this commit to have an immediate effect, it may be necessary
to remove the `tests` and `Testing` directories and some CMake files
from your build directory and rebuild. Run `ctest -N` to see the list of
tests; there should be less than 200.
Reviewed By: sergey, LazyDodo, sebbas
Maniphest Tasks: T83222
Differential Revision: https://developer.blender.org/D9649
The issue is that the "Noisy Image" pass is added even though it should not.
`use_denoising` has to be enabled on the scene and on the view layer
to actually enable it.
Differential Revision: https://developer.blender.org/D10048
Reviewers: lukasstockner97, brecht
This is part two of the fix for T84459.
Issue appears to be caused by AMD graphics driver later than 20.11.1 and
affects older GPUs (Polaris/FIJI cards). Drawing normals in edit mode
uses the same OpenGL data type for storing normals that is known to be
faulty.
This change fixes the face dot normals by using GPU_COMP_I16.
Issue appears to be caused by AMD graphics driver later than 20.11.1 and
affects older GPUs (Polaris/FIJI cards). Wireframe drawing uses the same
OpenGL data type for storing normals what is known to be faulty.
This patch enabled storing the normals using GPU_COMP_I16. It also
solves the normals drawing in edit mode for vertex and loop normals.
The start of the text was stepped over without subtracting it's length
(introduced in fad80a95fd).
Replace this logic with BLI_string_join_array to simplify construction.
Multiple Wintab tablets do not send relative button state when
configured to do so. This causes button events to be delayed until
processed as Win32 button events.
This commit fixes the issue by configuring Wintab to use absolute
button state and tracking changes manually.
The incremental snap was always operating in the local space, which in most
cases is the VIEW type orientation.
Use only local space when the operation is affected by constraint.
Differential Revision: https://developer.blender.org/D10052
This commit replaces the two-column list for editing node group inputs
and outputs with a cleaner solution with two panels. The new layout
has several benefits:
- It uses the vertical space in the node editor sidebar better.
- It should be more familiar because of similarity with other UI lists.
- It should look better with consistent alignment and icons.
Note that displaying the "Name" property outside of the list itself is
a bit inconsistent and could possibly be removed in the future.
Differential Revision: https://developer.blender.org/D9683
If scene strip has no scene assigned, leave source string empty.
Same goes for all other strips, that use ID datablocks.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D10058
Error handling added in 512a23c3d6 caused that reading header of new
file failed, since it is empty.
Don't attempt to read header if file is empty. If header can not be read
anyway, try to delete the file. Add asserts, as this should never
happen.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D9954
This property was intended to affect fit method for added strips prior
to running operator. However UI team did not agree with current
implementation.
ref T84535
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D10055
All eevee scene properties are not animatable due to
`RNA_define_animate_sdna(false)` so there is no need for an animation
decorator here (would not show anyways).
Not sure if setting use_property_decorate to False and then manually
adding one again was a hack in rB7fc60bff14a6 to get the alignment
right, but seems to work good now without it.
Note: there also seems to be an inconsistency here generally:
- Eevee reserves room for an animation decorator in almost every panel
(except for "Sampling" and "Indirect Lighting") even though almost none
are animatable (except for stuff in "Hair" and "Film"). This looks nice
if multiple panels are expanded (except for mentioned "Sampling" and
"Indirect Lighting" -- maybe these should also reserve the room?)
- Cycles does not use animation decorators at all (even though pretty
much everything is animatable here -- maybe these should also use
animation decorators?)
- Then there is also the 'shared' "Grease Pencil", "Freestyle" and
"Colormanagement" -- these dont use animation decorators, but some stuff
is animatable...
Regarding the note: not sure what the guidelines here are, if this is
isolated to each panel then there is lots of stuff for eevee that could
set use_property_decorate to False, if multiple open panels are
considered (for nice visual consistency between them), then there is
romm for improvement elsewhere, too.
Maniphest Tasks: T81411
Differential Revision: https://developer.blender.org/D9164
The "repeat" property was turned off by default in rBf5080c82dd91, but
it's important to have repeat turned on for this operator since it can be
used to fill large areas. This commit is similar to rBaa77689f77b4.
Fixes T84531
The nodes were selected in new node groups because they are by default,
but there's no particular reason for them to be selected, and it can
be distracting.
Adding the modifier itself already adds a new node tree, which is
then displayed in the node editor because of the active object and
active modifier context. So there's no need to create the node tree
in the python code in this case.
Previously, it was only forbidden to delete the last scene. This can
lead to the situation where a .blend file only contains linked scenes.
This is problematic, because linked data might not always be available
or can be removed from a .blend file without having an additional check
for remaining scenes.
Now there always has to be at least one local scene.
Reviewers: mont29
Differential Revision: https://developer.blender.org/D10049
The pointer allocated to the `TransData` was being incorrectly incremented,
causing misalignment and consequently `heap-buffer-overflow`.
Because of this, `TD_NOTCONNECTED` was being set in a strange way that did
not correspond to other types of `TransData`.
The solution is to not increment the `TransData` pointer and set
`TD_NOTCONNECTED` only for "unconnected" segments.
The code was also a bit deduplicated.
The command line syntax for Inkscape changed quite a bit for the 1.0 release,
see https://wiki.inkscape.org/wiki/index.php/Release_notes/1.0#Command_Line.
Think it's reasonable to expect Inkscape 1.0 or later be installed if you want
to generate the icons with the script. It's easy to get via the website, if the
distribution doesn't provide new enough packages. Only few people would use the
script anyway.
I also had to change the path for command line access on macOS which apparently
changed (https://stackoverflow.com/a/60068607). Although I didn't find a
mention of this change in the Inkscape release notes.
Commit d259e7dcfb increased the instance limit, but only provided
a fall back for the host code for older OptiX SDKs, not for kernel code. This caused a mismatch when
an old SDK was used (as is currently the case on buildbot) and subsequent rendering artifacts. This
fixes that by moving the bit that is checked to a common location that works with both old an new
SDK versions.
Was reported for meshes, but was true for any type.
Now add appropriate notifier to refresh the Outliner.
Maniphest Tasks: T84475
Differential Revision: https://developer.blender.org/D10030
This was reported for the Triangulate geometry node, but was also true
for the triangulate modifier and in exporters.
Note the modifier was introduced with "Ngon Method" in rBa7b44c82e5b9 but
was renamed to "Polygon Method" in rBf4762eb12ba5.
Since quads are also polygons (and quads have their own method), the
term "N-gon" is more appropriate here and is also described in the
glossary https://docs.blender.org/manual/en/2.92/glossary/
index.html#term-N-gon
Docs have been updated in rBM7539 (partially - the method would also
have to be renamed once this patch lands).
Note this also fixes the wrong enum used for the alembic exporter.
Fixes T83907
Maniphest Tasks: T83907
Differential Revision: https://developer.blender.org/D10022
Currently such triangles are effectively already excluded, because
the calculated forces are not applied to pinned vertices. However
these forces are still being computed, which is inefficient.
This adds an early check for triangles where all vertices are
pinned during BVH overlap detection, which significantly speeds
up certain use cases with big fully pinned areas that happen to
overlap a collider. In case of self collision both triangles must
be fully pinned to exclude safely, because the computation is
symmetric and handles two triangles at the same time.
Differential Revision: https://developer.blender.org/D10041
Using malloc to allocate a temporary array for each vertex,
which most commonly contains just 4 elements, is not efficient.
Checking the mode with a switch is also better.
Differential Revision: https://developer.blender.org/D10040
Linux does not report the driver version. It does report the OpenGL
version. This change will check the OpenGL version to enable the HQ
normal work around.
Adjust default cache settings for all files to store raw and final
images.
All settings are still available when developer extras option is
enabled in user preferences.
This is part of design task T80278
Differential Revision: https://developer.blender.org/D9745
The cause for this was quite simple-- a misplaced bitwise operation
before passing a value to the function that grayed out buttons based on
their state, caused by refactoring in rB933bf62a611f before committing.
What makes the situation a little more confusing is that the theme colors
are overridden for list buttons in UI lists, necessitating a second
call to `ui_widget_color_disabled()`. Ideally that wouldn't be necessary.
For a while now OptiX had support for 28-bits of instance IDs, instead of the initial 24-bits (see also
value reported by OPTIX_DEVICE_PROPERTY_LIMIT_MAX_INSTANCE_ID). This change makes use of
that and also adds an error reported when the number of instances an OptiX acceleration structure is
created with goes beyond the limit, to make this clear instead of just rendering an image with artifacts.
Manifest Tasks: T81431
There is no need to first copy weights to a separate array,
or create the data layer if it doesn't exist. The threaded
code can retrieve the weight directly from the layer.
Differential Revision: https://developer.blender.org/D10015
While using the Sample Weight tool in Weight Paint mode, user eyedropper mouse cursor.
Differential Revision: https://developer.blender.org/D9431
Reviewed by Pablo Vazquez
While using the Sample Weight tool in Weight Paint mode, show weight value in tool header.
Differential Revision: https://developer.blender.org/D9432
Reviewed by Pablo Vazquez
Instances are created with an "index" parameter used for persistence over
time through animation. Currently the geometry nodes instancer passes
the index in the array for this value, but the arrays created by the
"Point Distribution" node aren't necessarily stable in this way when
the input mesh is deformed. In D9832 we already mostly solved this
problem with an `id` attribute. The solution here is to create instances
with this attribute as well.
It's important to note that deforming the instanced points *after*
distribution will usually be a better solution for this problem. This
solution is likely still important though.
Differential Revision: https://developer.blender.org/D10024
The hair mirroring code seems to expect that hair is emitted from faces.
The PE_mirror_x contains the following expression: mirrorfaces[pa->num * 2].
This only makes sense when pa->num is a face index.
The simplest short term solution is to disable the mirror operator when
the particles haven't been emitted from faces.
Diffferential Revision: https://developer.blender.org/D10002
Changing which node group a group node references needs a depsgraph
relations update in some cases.
Differential Revision: https://developer.blender.org/D10018
- Use the name "Point Cloud" instead of "Pointcloud"
- Fix a typo in UV_OT_smart_project.
- Use the name "Install Light" to for the installation
operator for MatCaps, HDRIs, and Studio Lights.
Fixes T83585, T65291, and T54921
Differential Revision: https://developer.blender.org/D9867
BPY_context_dict_clear_members_array used PyDict_DelItemString
which raised & cleared the exception when the key didn't exist.
Even though setting/clearing the exception is supported,
it's worth avoiding where possible as it adds some overhead as well as
overwriting the previous error which can free PyObject's which are
unrelated to the code being executed.
Possible fix for T82552, crashing on Windows when setting the exception.
Since the introduction in rB2221389d6e8e, baking to vertex colors would
still check for the existence of a valid UVMap (as if baking to image
textures).
Now check for vertex colors instead if target is
R_BAKE_TARGET_VERTEX_COLORS.
Maniphest Tasks: T84416
Differential Revision: https://developer.blender.org/D10006
Since there is a specific icon to represent the 3D cursor it makes sense
to add it to the RNA struct. This struct's icon is only displayed in the
Data API section of the outliner.
When using "Make Links"->"Materials" regular materials could be linked
onto grease pencil objects. This caused a number of issues.
The fix changes the `allow_make_links_data` function to make sure that
if one object is of type `OB_GPENCIL`, the other has to be aswell.
Reviewed By: antoniov
Maniphest Tasks: T84420
Differential Revision: https://developer.blender.org/D10014
'Caused'/revealed by rBd29a720c45e5: Operators that fully re-create the
mesh would previously rely on `sculpt_update_object` called from update
code to get required sculpt-specific data layers re-added to the new
mesh.
Now instead put all code adding data to orig mesh for sculpt purpose
into a new util function (`BKE_sculpt_ensure_orig_mesh_data`), and call
that function when entering sculpt mode, and from voxel remesher code.
This is contonuing effort to more clearly separate orig data from evaluated
data handling/usage in sculpt code.
TODO: there are likely other code paths that would need to call that
new function?
Reviewers: @sergey, @pablodp606
Subscribers:
Note that this is fairly fragile still, especially in cases like paint
cureve undo, which actually does not use context in most cases (and can
be called with a NULL context), but do need it in one case. This will
need a proper rework at some point.
Rename it to mark it is only for `encode` callbacks, fix `encode`
callback of text undo to early fail in case it gets a NULL context, add
an assert to `BKE_undosys_step_push_with_type` that context is not NULL
when undotype requires a valid one.
Note that in practice this should not change anything, currently it
seems that we always get a valid context in
`BKE_undosys_step_push_with_type`?
Steps to reproduce were:
* Drag object icon from the Outliner into the 3D view (or an object asset from
the Asset Browser)
* Open the "Adjust Last Operation" panel
* Edit options in there - the object would move to the mouse location
The same issue happens with collection instance and object data adding (e.g.
via drag & drop). This patch addresses them too.
The operator used the event state stored in the window. This shouldn't be
accessed from the operator execute callback generally which happened here.
Especially not if the operator supports editing properties.
confirmation
Deleting keyframes in the dopesheet or graph editor always required
confirmation, even if used ouside of the "Delete" menus.
Now add a "confirm" option [same as for deleting objects], which can be
disabled for immediate keyframe deletion.
This will also change the default behavior and bring this in line with
how object deletion works so there is one shortcut for bringing up the
menu/confirmation and another shortcut to delete immediately without
requiring confirmation / another click:
- Blender Default keymap: "X" for menu, "Del" for immediate
- Industry Compatible: "Backspace" for menu, "Del" for immediate
Maniphest Tasks: T70316
Differential Revision: https://developer.blender.org/D9651
The issue is that `UI_GetThemeColorBlendShade4fv()` creates a color
with alpha, but there is not any background underneath to blend in with.
The solution is just to draw an opaque background first, which also
halves the number of rects to draw. Note that the brighter rows get
very slightly darker after this change.
Differential Revision: https://developer.blender.org/D9947
This was caused when the BKE_pbvh_draw_cb function was used with
update_only_visible set to false. In that case, all nodes with the flag
were updating, but the update flag was only cleared for visible nodes.
This was causing constant updates per redraw in no visible nodes until
they enter the view frustum and their flag was cleared.
In order to fix this and prevent it from happening again:
- Updating the buffers, flushing the updates and clearing the flags are
now part of the same function. It does not make sense to do these in
separate places.
- The BKE_pbvh_draw_cb function was refactored so the
pbvh_update_draw_buffers is only called once. It should now be easier to
understand what the function does when it is used to update only visible
nodes or all nodes.
Reviewed By: mont29
Maniphest Tasks: T79146
Differential Revision: https://developer.blender.org/D9935
The issue can be simply resolved by moving the primitives and plus
icons slightly. They still bump up against the top and bottom of the
header but it looks much better now.
Rendering on the CPU uses the Embree BVH layout, whether the OptiX denoiser is enabled or not.
This means the "build_bvh" function gets a "BVHEmbree" object to fill and not a "BVHMulti" as it
was assuming before, which caused crashes due to memory geting overwritten incorrectly. This
fixes that by redirecting Embree BVH builds to the Embree device.
Manifest Tasks: T83925
Changing the geometry in the current scene caused the primitive offsets for all geometry to
change, but the values would not be updated in all bottom-level BVH structures. Rendering
artifacts and crashes where the result. This fixes that by ensuring all BVH structures are
updated when the primitive offsets change.
Since the introduction in rB4de7c0c3105a, the option is only used in the
compositor, it has no effect elsewhere [texture nodes, shader nodes].
Now only show the option for the compositor.
Maniphest Tasks: T84389
Differential Revision: https://developer.blender.org/D10005
{D9211} introduced pre-multiplying the color for the keying node. This
pre-multiplication should also be done by other keying nodes and should be
the default operation for alpha node.
This patch will change the logic of keying nodes (Cryptomatte Node,
Channel Matte, Chroma Matte, Color Matte, Difference Matte, Distance
Matte, Luminance Matte) and breaks old files.
The Set alpha node has a mode parameter. This parameter changes
the logic to `Apply Mask` the alpha on the RGBA channels of the input color
or only replace the alpha channel (old behavior).
The replace mode is automatically set for older files. When adding
new files the the multiply mode is set.
Reviewed By: Sergey Sharybin
Differential Revision: https://developer.blender.org/D9630
Exposed by rBeaa44afe703e.
Definition for CONSTRAINT_TYPE_NULL is not totally clear (it is set for
constraints without data, see an old comment from Ton), but for these, a
TypeInfo cannot be fetched.
Avoid processing those constraints in UI code, just do nothing instead.
Maniphest Tasks: T84367
Differential Revision: https://developer.blender.org/D9987
Stores cryptomatte hashes as meta data to the render result. Compositors could
use this for lookup on names in stead of hashes.
Differential Revision: https://developer.blender.org/D9553
The mask overlay wasn't part of the overlay engine. The reasoning nehind
this was that more editors used the mask overlay and most of them used
old drawing code. This patch adds the mask overlay drawing to the draw
overlay engine. This code path will only be used by the image editor
VSE, Compositor and Movie Clip editor will still use the previous
method.
During this patch some alternatives have been researched:
1. `ED_mask_draw_region`: this would lead to different code paths when
drawing in the image editor, and some hacks to retrieve the correct
framebuffer.
2. Add mask drawing to image engine: Would lead to incorrect color
management when viewing the mask.
3. Add mask drawing to image engine and overlay engine: Would lead to
duplicated code.
4. Add mask drawing to overlay engine and for combined overlay select
the correct framebuffer.
Option 4 was chosen as the exception (switching framebuffers) can be
done without hacks. The code stays clean.
Workspaces [FILTER_ID_WS] were in the `Environment` category
IDFilterBoolean, whereas they are in the `Miscellaneous` category in
`rna_def_fileselect_asset_params`.
Make this consistent ['Miscellaneous'] in both cases.
(note this was already done in rB2c317457cbf2 for the file browser case)
Spotted while looking into T83983.
Maniphest Tasks: T83983
Differential Revision: https://developer.blender.org/D9911
Use the BMesh symmetrize operator instead of using the modifier code.
While we could support shape-keys with the existing code used by the
mirror modifier, we'd need to add code-paths for evaluated mesh & bmesh
conversion to handle shape-keys differently just for this one case,
since we want to avoid copying & processing shape-keys layers for
evaluated meshes in general.
of islands in vertex mode if "UV Sync Selection" is on
Caused by rB72b422c1e101: UV: support select linked with sync-select in
vert/edge modes
If you had island selection mode enabled in the UV editor with UV Sync
Selection off, and switch UV Sync Selection on, then in vertex selection
mode all bulk selection ops (box, circle, lasso) will be selecting whole
islands.
Prior to culprit commit, for sync selection ON plus island selection ON,
BM_uv_vert_map_create would always return a NULL vmap (it was called
with `use_select` = True, no faces tagged selected). After said commit,
for sync selection ON plus island selection ON, BM_uv_vert_map_create
would return a valid vmap (it is now called with `use_select` = False,
no faces tagged selected - but if `use_select` is False, all UVs will be
added here).
If I am not mistaken, it is never wanted to actually select islands with
box/lasso/circle when sync selection is turned ON [after all you dont
have the UI for it showing], so solution is now to check for this
earlier and not even call uv_select_linked_multi in those cases. (Maybe
in the future this can be unified and we dont need separate selection
modes fo UV and 3D?)
Maniphest Tasks: T84018
Differential Revision: https://developer.blender.org/D9917
The property split layout was broken when the bone dialog appeared,
because the name field was not set. Theoretically property split should
work in this case, but it makes sense to use the label anyway.
In the report, the geometry is copied because it has two users and the
final join node needs to write to it. The join node also happens to
remove attributes apparently, because it exposed a mistake in the "copy"
method of the `MeshComponent` class. The copy is supposed to be
a deep copy, but the vertex group name map was not duplicated.
Differential Revision: https://developer.blender.org/D9991
If there was a control point at an extreme position when drawing a curve
profile (in the bottom corner), the fill's trianglulation could fail, giving
a misleading view of the curve. This is because the extra points added to
create a closed shape were exactly on the border of the view.
This commit adds a small margin to those points, so the triangulation
doesn't fail because the line overlaps itself.
Another possible solution is to use a different algorithm to fill
the polygon, such as scanfill, which is used by curve objects.
This seemed simpler, and seems to work fairly robustly.
Differential Revision: https://developer.blender.org/D9989
Since the `TransData` converted from vertices is the same used for other
transform modes (Move, Rotate, Resize), the logic used for mirroring
focused only on the position of the vertices.
The solution here is to create a specific `TansData` for `CD_MVERT_SKIN`.
When building opensubdiv with more aggressive optimization flags
(-march=native -02) the output meshes would differ a bit from what we
expected in the current automated modifier test file.
The differences in vertex position is within the 1e-6 range, which I
would call is acceptable for floats. In addition to this, all the
modifier test that tests the subdiv modifier in particular pass without
any modifications. I've updated two tests in the modifier test file and
script to make it pass (listed below).
Updated following test categories:
1. Decimate test
Here there was a subdiv modifier applied before the actual decimate
modifier. Because the decimate modifier creates a queue of potential
vertices it can remove, it is highly sensitive to even small changes as
it drastically changes in which order the vertices are decimated in.
As this test should only be testing the decimate modifier, I pre-applied
the subdiv modifier in the test file.
2. RandomCubeModifier
For these tests I removed the subdiv modifier as well. As with decimate,
a small change in vertex position here can lead to quite different
results.
Reviewed By: Sergey, Bastien
Differential Revision: http://developer.blender.org/D9004
This was introduced in rBe5c0d4613a8943c712b57fb336997ecd78e6508e.
The issue is that the new fluid system does not use the pointcache
system for caching anymore, but still relies on pointcache for
other things. For example, it uses DEG_add_collision_relations
which internally creates relations with pointcache. Not sure if
there are other issues.
Ideally, this dependence should be resolved in one way or another
at some point, but that is out of scope for this fix.
Differential Revision: https://developer.blender.org/D9984
Reviewers: brecht
When in edit mode, the edit lines for de-selected surfaces did not
show up.
The bug was caused by the is_gpencil bool which reused another flag.
Both grease pencil and nurbs surfaces use the edit_curve_handle shader.
A dedicated flag was added to make sure the is_gpencil bool is
set correctly.
Reviewed By: fclem
Maniphest Tasks: T84260
Differential Revision: https://developer.blender.org/D9985
Regression introduced by {c766d9b9dc56}. When converting the vertex
buffer to a texture buffer the fetch mode wasn't checked and the short
was bitwise interpreted as a float. This change checks the fetch_mode
and select the correct texture buffer.
This could also be added to other places when needed. At this time it is
only added here to support vertex colors when used with hair particles.
THe high quality normals work around is enabled for Polaris cards using
the official drivers. Since driver version 2.11.2 they fail to render
using low quality normals.
The detection of polaris cards is done by matching the opengl renderer.
The renderer strings have been extracted from various reports linked to
{T82856} but isn't complete as some reports are missing the exact
renderer as users don't always report via the help menu.
This change makes it possible for platforms to only support high quality
normal rendering. This is part of {T82856} where current AMD drivers
running on the polaris architecture does not support the low quality
setting due to a driver bug.
In a next commit the work around will be enabled.
This adds high quality normals for non meshes. These include
* Volumetric Object Wireframe
* Metaballs
* Extracted Curves
* Curves in edit mode
This is in preparation to fix a regression in recent AMD
drivers where the `GL_INT_2_10_10_10_REV` data type isn't
working in Polaris cards.
Since the introduction in 2c23bb8389,
these were set to 10000 each.
This seems like an arbitrary limit (BKE_image_scale / IMB_scaleImBuf
don't have limits and I couldn't spot similar size restrictions in
image relating functions), now match what we do for creating images
(rna_Main_images_new), use INT_MAX.
Ref D9950
While it's never NULL at the moment, checks elsewhere in this function
support passing in a NULL filename, so keep this working as intended
in case RNAProcessItem.filename is NULL in the future.
- Remove ternary operators when both values are the same.
- Remove break after return.
- Remove redundant NULL checks for code which handles
those cases immediately beforehand.
Steps to reproduce:
1. Add clip to clip editor
2. Open the tracking settings & tracking settings extra panels
To fix this the sub panel is only drawn if a track is active.
The main panel will exit early and display a "No active track" message.
This is consistent with other panels in the clip editor.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D9727
* This way you don't have to look up the function declaration to know what the
boolean value means.
* You can call the function in a loop over the available sizes and pass the
index as size.
* Makes it easier to add a new size in future if needed.
This value really is the opacity, or the alpha, since a value of 1.0 means
that the image is fully visible, not invisible like "full transparency"
would suggest. Mistake in rBea4d28aea0343a.
Differential Revision: https://developer.blender.org/D9920
This bug exposes some ugliness in the implementation in poisson disk
distribution implementation with likely incorrect resizing of vectors and
some other assumptions. However, a simple quick fix is to return early
when the input mesh has no faces. This makes sense anyway because
there is no surface to scatter on.
This adds a basic set of tests for curve sampling and bevel generation.
At the moment there are basic test cases for bevels, caps, and the
filling of 2D curves, but more tests can be added in the future.
Curves are actually converted to "DispLists" for displaying them in the
viewport, so it's much simpler to rely on the mesh conversion operator
instead of building a new test framework for another data structure.
Differential Revision: https://developer.blender.org/D9958
By design, there should be lines between the alternating horizontal
stripes in the Sequencer. But currently they are all drawn in one place,
on top of each other. Mistake in rBfae895125efe.
Differential Revision: https://developer.blender.org/D9962
It is perfectly 'valid' to find invalid RNA properties references in
override properties list. Data change, RNA changes, IDProperties change,
some linked ID may become unavailable, etc.
Note that those invaldi override properties are cleaned up when updating
the override info (so typically on undo step storage, and .blend file save).
New UUID was generated for original strip not new one.
Bug caused "invisible" sound strip playing that is impossible to
remove. Especially noticable when transforming pasted strips. In such
case, file reload was necessary.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D9912
Looks like this has been wrong since the introduction in rB5505697ac508
10 years ago.
To get the proper texture lookup in the mirrored area, first rotate, then
translate/flip [instead of the other way around].
Maniphest Tasks: T83439
Differential Revision: https://developer.blender.org/D9897
Try to detect if a given image may have valid alpha data or not (based
on number of channels and depth). This may be a bit doggy in theory, but
in practice it should cover most fields as expected. We can always
adjust the euristic here in other wrong cases appear.
This will affect all import add-ons using that node shader wrapper (at
least OBJ and FBX ones).
Modifies WM_BUTTON processing to reuse existing mousemove logic. Fixes
case where cursor wrap was not being handled on mouse release.
Bonus: flattened mouse move logic so all paths lead to a single return.
Removed case where wrap is not handled until subsequent mousemove as
button press may rely on updated mouse move position.
The transform code did not provide a 2d context to be used in 3d space.
The solution is to set all matrices for the screen space in these cases.
This commit also removes the dial3d drawing in these cases.
It was not correct anyway.
These two operators (one for grease pencil, one for other objects)
copy a single modifier from the active object to all selected objects.
The operators are exposed in the dropdown menus in modifier headers.
Note that It's currently possible to drag and drop modifiers between
objects in the outliner, but that only works for dragging to one object
at a time. Modifiers can also be copied with the "Make Links" operator,
but that copies *all* modifiers rather than just one. The placement
and scope of these new operators allow for more useful poll messages
and error messages as well.
Every object type that supports modifiers is supported. Although hook
and collision modifiers aren't supported because of an unexplained
comment in `BKE_object_copy_modifier`, other than that, every modifier
type is supported, including particle systems, nodes modifiers, etc.
The new modifiers are set active, which required two small tweaks to
`object.c` and `particle.c`.
Reviewed By: Hans Goudey (with additional edits)
Differential Revision: https://developer.blender.org/D9537
We have to check that the RNAProperty found in `rna_idp_path` from the
currently checked IDProperty name is actually a real runtime RNA-defined
one, and not a static C-defined RNAProperty...
Reported as a strict compiler warning, and the need of fall-through is
not needed from just reading the code.
If it is something what must happen, the reasoning is to be explained
in the comment, and ATTR_FALLTHROUGH is to be used.
Having a centeral place to find a list of all library overrides should be
useful for managing production scenes where library overrides are used a lot.
This change adds the individually overridden properties of a data-block under
the data-block itself. Just how we show modifiers, constraints or pose channels
there. This way we can also expose library override operations/options better
in future.
There's also a filter option for the library overrides now, so they can be
hidden. It is only available in the View Layer display mode though, like the
other filter options.
One internal change this has to do is adding more informative return values to
undo pushes and the library override functions called by it. That way we can
send a notifier when library overrides change for the Outliner to know when to
rebuild the tree.
Differential Revision: https://developer.blender.org/D7631
Reviewed by: Andy Goralczyk, Bastien Montagne, William Reynish
In some operators that previously allowed duplicating the selected data-block,
the operator would not be available now. 2250b5cefe split the "new" operators
into "new" and "delete" to allow clearly differentiating between the two. But I
apparently didn't amend all affected data-block selectors to use the added
"duplicate" operators.
I went over all operators that were split now and made sure all affected
data-block selectors are updated.
Steps to reproduce were:
* Start with factory defaults
* Set "Render in" to "Maximized Area"
* Render
* Open "Save as"
* Click Cancel
Mistake in 78d2ce19c4. Was using the wrong area pointer, which I think
didn't make a difference in most cases, but here it did.
Previously Wintab packets were added to a local queue to be processed
during Win32 mouse events, in order to correlate Wintab to Win32
mouse buttons. Wintab packets before Win32 mouse down events were
expired on a timer.
This commit drives mouse events during Wintab events when a device is
in range. When a Wintab button is found it is dispatched if an
equivalent event can be popped from the Win32 event queue. If a Win32
mouse button event is not associated with a Wintab event, it falls
through to WM_BUTTON handling. All Wintab packets are handled as they
are received.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D9908
Approximately 138 changes in the spelling of compound words
and proper names like "Light Probe", "Shrink/Fatten", "Face Map".
In many cases, hyphens were used where they aren't correct, like
"re-fit". Other common changes include:
- "Datablock" -> "data-block"
- "Floating point" -> "floating-point"
- "Ngons" -> "n-gons"
These changes help give the language used in the interface
a consistent, more professional feel.
Differential Revision: https://developer.blender.org/D9923
Approximately 195 changes of capitalization to conform to MLA title style.
UI labels and property names should use MLA title case, while descriptions
should be capitalized like regular prose, generally with only the start of
a sentence capitalized.
Differential Revision: https://developer.blender.org/D9922
This is relatively expensive and as per the OSL spec, this value is not
expected to be meaningful for non-light shaders. This makes viewport updates
a little faster.
As a side effect also fixes T82723, viewport refresh issue with volume density.
In the Bake > Output panel, there is now a choice between Image Textures and
Vertex Colors. The active vertex color layer is used for baking. This works
with both existing per-corner and sculpt per-vertex vertex colors.
Split of internal/external image bake target code off into smaller functions and
refactor associated data structures for clarity. Designed so that a vertex color
bake target is easy to fit in.
Also avoid passing in a huge number of arguments into the main baking function,
pass a struct instead.
The issue was that sounds were always faded from 0 volume when they
started and depending on the currently used buffer size, the fading took
longer or shorter.
The solution stores whether the sound has ever been played back and
consequently does not fade when starting to play back.
This node updates the "rotation" attribute on points.
Multiple ways to specify the rotation are supported.
Differential Revision: https://developer.blender.org/D9883
Ref T83668.
Disclaimer: This workaround avoids crashing with current state of the
code and is only committed as temporary band-aid until we can assess the
full issue and decide if/how it needs to be adressed.
This fixes the main issue there (essentially a followup to
rB90e12e823ff0: Fix T81854: crash when undoing switch between sculpt and
edit mode).
We basically remove more (hopefully all the remaining!) modifications of
orig mesh from `sculpt_update_object`, as those done here will not be
immediately available in the evaluated data (that specific bug happened
because masking data was added to orig mesh there, but not flushed to
depsgraph evaluated one).
This also goes towards a better separation between handling of evaluated
data and orig one.
Note that modification of orig mesh data can still happen, e.g. values
in some cdlayers, but at least all pointers should now be valid in the
evaluated mesh.
There are still some issues, e.g. we now get an assert/crash in
`multires_reshape_assign_final_coords_from_ccg` when undoing out of the
Sculpt mode, presumably because subdiv_ccg data remains unchanged then
(and hence still has the `has_mask` flag set), while actual mesh data do
not have that cdlayer anymore...
This commit also cleans up/simplifies some code,
`ED_object_sculptmode_enter_ex` was (indirectly) calling
`BKE_sculpt_face_sets_ensure_from_base_mesh_visibility` twice e.g.
Mainly updated the Mantaflow version. It includes the new viscosity solver plugin based on the method from 'Accurate Viscous Free Surfaces for Buckling, Coiling, and Rotating Liquids' (Batty & Bridson).
In the UI, this update adds a new 'Viscosity' section to the fluid modifier UI (liquid domains only). For now, there is a single 'strength' value to control the viscosity of liquids.
This seems to be a longer standing issue. Steps to reproduce were:
* With factory settings, Ctrl+O then F12
* Close the render window using the window close button
* Close the File Browser window using the window close button
This could be OS specific though, at least on macOS this caused a crash.
With the new `ed_util_ops.c` introduced in 2250b5cefe, existing code can be
cleaned up to use it.
* Move new ID preview operators to `ed_util_ops.c`
* Move ED operator registration to `ed_util_ops.c`
* Use doxygen sections in `ed_util_ops.c`
* Rename ID related ED operators to use `ED_OT_lib_id_` prefix.
* Remove unused `#include`s
After 1e799dd26e, the logic to recognize a temporary File Browser window
didn't work correctly anymore. It would recognize a maximized File Browser
inside a temporary window as a temporary File Browser window, and attempt to
close this (rather than returning to the previous layout).
The logic there was pretty weak, and still is I think. A more stable solution
would need bigger refactoring.
With this, it's also not possible to maximize or fullscreen an area within a
temporary window (Preferences, File Browser, render window) anymore. Think that
won't make a noticable difference, since you couldn't open multiple areas there
anyway, and the area seems to be maximized already.
Cleaned up the code a bit to not become more confusing with the changes.
That code looked really like a joke tbh... Random reported memory usage
is not really that important, but the uninitialized items counts was
potentially fairly severe.
Don't add the same stats refresh notifiers multiple times, it can be slow to
search the full list of notifiers for duplicates when there are many.
Fundamentally the time complexity in searching for duplicates is still bad.
Inspired by D9901 from Erik Abrahamsson
Sometimes multiple calls to `bpy.data.orphans_purge()` are needed to
delete all orphans, because a call can turn previously-used datablocks
into orphans. Returning the number of deleted datablocks makes it
possible to keep looping until nothing can be deleted any more.
This patch keeps track of deletions in `id_delete()` so that it can be
returned up the call stack.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D9918
Respond to return values of `fscanf()` and `fread()` to detect and
handle I/O errors. Not only is error handling a good idea, this also
prevents warnings from GCC that `fread()` and `fscanf()` return values
are ignored.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D9915
`seq_convert_transform_animation()` converted only keyframed value, but
when bezier interpolation is used, posotion of handles was unchanged.
This caused significant difference in animation.
I have checked only linear interpolation when testing versioning originally.
This adds a popover to the properties editor. Currently the only setting
is for controlling outliner to properties syncing.
Because we cannot define a perfect heuristic to determine when
properties editors should change tabs based on outliner icon selection,
we need an option to enable or disable this behavior per properties
editor.
There are 3 options for controlling the syncing. Auto uses the heuristic
to only allow tab switching when a properties editor and outliner share
a border. On and off enable and disable syncing respectively.
Differential Revision: https://developer.blender.org/D9758
**Renames parms**:
| **old name** | **new name**
| old_value | lower_value
| target_value | blended_value
| value | strip_value
| inf | influence
**Reason**: {D8296} allows full nla stack evaluation with proper
keyframing support. These names should make it more intuitive how all
the data gets processed and inverted. Note, that I do use the term
"strip_value" instead of something like "fcurve_value" of the tweak
strip. Technically, "strip_value" is closer to what is solved for.
For example, if a noise fmodifier was active for the fcurve, then the
remapping would appear to be wrong. In the future, further solving can
be done afterward, outside of the nla system, to remove the effects of
fmodifiers.
**Renames functions**:
| nla_invert_blend_value | nla_blend_get_inverted_strip_value
| nla_invert_combine_value | nla_combine_get_inverted_strip_value
**Reason**: D8296 adds get_inverted_lower_value() variants,
so "invert" alone is too vague.
**Renames NlaKeyframingContext member**:
| nla_channels | lower_eval_data
**Reason**: D8296 evaluates the upper stack. This name makes it more
obvious what data is stored there.
No functional changes (relative to the dependency below)
Split from {D9247}
Depends on {D9694} since the code was so close to eachother.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D9695
Always assume geometry nodes produce potentially animated meshes or point
clouds. In general it is hard to check if geometry nodes are animated, and
for modifiers this was already weak.
The better solution will likely involving checking which geometry was
modified by the depsgraph on frame change, to replace the current mechanism
of manually checking for certain types of modifiers and animation.
Weight Paint Multi-Paint definitely depends on the weight specific
flag, and vertex group locking also involves group name symmetry
via BKE_object_defgroup_mirror_selection. These two are also
features implemented by me so I feel confident.
The rest of object_vgroup.c possibly should be changed too, but
that requires more consideration than these obvious cases.
Use the `ASSET_MANAGER` icon which is more appropriate than the current one
which was just an unused icon that seemed sorta fitting, but was only meant to
be temporary.
The `ASSET_MANAGER` icon is already used for the Asset Browser, so it's being
reused which we normally avoid. So we may still want to create a dedicated one,
maybe a variation of this one.
Code was removed in 247b10e6a2 but it was incorrect in first place.
Conversion was done for `offset_x` and `offset_y` channel originally,
but it should be done for `scale_x` and `scale_y`
OIIO utils are mandatory for a whole set of tests (Cycles, VSE), and
it's a small package, no reason to not install it.
Also re-enabling package handling of OIIO on RPM-based distro, not sure
why it was disabled but this has become a fairly stable and standard
library now, would not expect issues anymore.
This adds an option (WITH_COMPILER_CCACHE) to build using Ccache if it's
found. Makefiles-based, Ninja-based and Xcode generators are supported.
Pass `-DWITH_COMPILER_CCACHE=ON` to cmake to enable Ccache.
Utility option in GNUmakefile is also added: for e.g.,
`make ninja ccache`.
Reviewed By: brecht, ankitm
Differential Revision: https://developer.blender.org/D9665
T83989 observes that the Attribute Math node always adds its
operands regardless of its operator setting. This was caused
by an oversight committed in rB23233fcf056e42, which overlooked
adjusting the exec function to use the new storage location.
Differential Revision: https://developer.blender.org/D9909
Normally, pure text buttons have no padding at their edges so they
align with edges of buttons, see D9058. However, in several cases
there are labels aligned to the right side of a list widget row,
so they're missing padding against the right edge.
The fix is to use emboss = 'NONE' for such labels, which changes
the drawing style, adding padding on the right edge. (Normally so
labels aligned with the text from non-embossed buttons). This is
not necessarily intended, but it works properly.
For more information, see the revision.
Differential Revision: https://developer.blender.org/D9874
Parts of the tool icons for box, circle, lasso, and tweak select that were
meant to be flat or at a 45 degree angle were slightly misaligned, making
the edge look blurry.
The convention is to put the label at the bottom of the enum, or in the
spot furthest away from the button. This commit reorders the items in
the "Slot", "Layer", and "Pass" menus to be consistent with this
convention. It also reorders the numbering so that higher numbers are
lower.
The original patch was by Adrian Newton (@TFS), with slight changes
and additions.
Differential Revision: https://developer.blender.org/D7142
This value was meant to be used for keeping images that are slowest to
render in cache. Method of measurement was flawed, because it doesn't
take UI overhead into consideration.
Cache panel is to be removed because users should not have to tweak
settings like this. It is not useful for development either, therefore
it is removed completely.
If image is cached twice, it's size has been counted twice as well, but
only image reference count is increased, not memory usage.
Use `MEM_get_memory_in_use()` instead of size own tracking.
Previously, the Annotation panels were a bit buggy in the movie clip editor.
This commit fixes the issue of the panel in the sidebar would disappear
when selecting "Tracks" if no tracks were added to the clip.
To solve this issue the user if given a label text saying "No annotation source"
This commit also removes some grease pencil operators from the toolbar
that do not work with the new annotation system.
This commit also moves the data source choice from the toolbar to the sidebar.
This is needed to migrate the current toolbar to the new tool system
(see T83612)
Some old invalid code was also removed.
Reviewed By: #grease_pencil, antoniov
Differential Revision: https://developer.blender.org/D9729
This new node increases the radiance of an image by a scalar value.
Previously, the only way to adjust the the exposure of an image was with
math node or using the scene's color management.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D9677
This bug was caused by making it so that non-embossed modifier icon
buttons could become an operator button and retain their red highlight
for disabled modifiers. The icon button needs emboss turned off, but
in earlier versions of Blender, `UI_EMBOSS_NONE` would be overridden
by animation or red alert states.
Instead of abusing "NONE" to mean "none unless there is animation or
red alert", this commit adds a new emboss flag for that situation,
`UI_EMBOSS_NONE_OR_STATUS`, which uses no emboss unless there is an
animation state, or another status. There are only a few situations
where this is necessary, so the change isn't too big.
Differential Revision: https://developer.blender.org/D9902
The previous design is rather old and has a couple of problems:
* Scalability: The current solution of adding little icon buttons next to the
data-block name field doesn't scale well. It only works if there's a small
number of operations. We need to be able to place more items there for better
data-block management. Especially with the introduction of library overrides.
* Discoverability: It's not obvious what some of the icons do. They appear and
disappear, but it's not obvious why some are available at times and others
not.
* Unclear Status: Currently their library status (linked, indirectly linked,
broken link, library override) isn't really clear.
* Unusual behavior: Some of the icon buttons allow Shift or Ctrl clicking to
invoke alternative behaviors. This is not a usual pattern in Blender.
This patch does the following changes:
* Adds a menu to the right of the name button to access all kinds of operations
(create, delete, unlink, user management, library overrides, etc).
* Make good use of the "disabled hint" for tooltips, to explain why buttons are
disabled. The UI team wants to establish this as a good practise.
* Use superimposed icons for duplicate and unlink, rather than extra buttons
(uses less space, looks less distracting and is a nice + consistent design
language).
* Remove fake user and user count button, they are available from the menu now.
* Support tooltips for superimposed icons (committed mouse hover feedback to
master already).
* Slightly increase size of the name button - it was already a bit small
before, and the move from real buttons to superimposed icons reduces usable
space for the name itself.
* More clearly differentiate between duplicate and creating a new data-block.
The latter is only available in the menu.
* Display library status icon on the left (linked, missing library, overridden,
asset)
* Disables "Make Single User" button - in review we weren't sure if there are
good use-cases for it, so better to see if we can remove it.
Note that I do expect some aspects of this design to change still. I think some
changes are problematic, but others disagreed. I will open a feedback thread on
devtalk to see what others think.
Differential Revision: https://developer.blender.org/D8554
Reviewed by: Bastien Montagne
Design discussed and agreed on with the UI team, also see T79959.
Since "Float Color" is more commonly used than "Byte Color",
which is not exposed in the interface yet anyway, it makes sense to
drop the "Float" label on the color data type name.
This uses the "id" attribute to randomly pick instances from a collection
for each point.
There is one issue. When the collection is updated (e.g. when an object is
added to it), the nodes modifier is not automatically updated. It seems
like we don't have the infrastructure to support this dependency yet.
The same issue exists in the Boolean modifier and with collision collections.
This should be solved separately soonish.
When "Whole Collection" is disabled, one direct child of the input collection
is instanced at each point. A direct child can be an object or a collection.
Currently, all objects are picked approximately equally often. In the future,
we will provide more control over which point gets which instance.
Differential Revision: https://developer.blender.org/D9884
Ref T82372.
Caused by rB7470c10601d0 where iterating nodetree nodes was changed from
backwards to forwards by mistake.
Maniphest Tasks: T83916
Differential Revision: https://developer.blender.org/D9890
Change the top coordinate of the animation channel list UI elements to
`rect->ymin` so they correctly span from `rect->ymin` to
`channel_height`.
Some buttons in the dope sheet channels didn't scale properly with the
`Keyframe Scale Factor` preferences setting. This was caused by using
the `ymid` value (`ymid = BLI_rctf_cent_y(rect) - 0.5f * ICON_WIDTH`) to
position the buttons that supposed to fill all vertical space in the
channel (with `channel_height` height). The `ymid` value is only
appropriate for the UI elements that with `ICON_WIDTH` height.
Maniphest Tasks: T83716
Reviewed by: sybren
Differential Revision: https://developer.blender.org/D9841
This adds a GPointer class, which is mostly the same as GMutablePointer.
The main difference is that GPointer references const data, while GMutablePointer
references non-const data.
Ref: T82651
Normally people use "Combine XYZ" to input a vector, but it is more
interesting to have an explicit vector input.
So this is basically "Combine XYZ" without any input sockets, the values
are stored in the node itself.
Differential Revision: https://developer.blender.org/D9885
Fix Euler discontinuities in the Bake Action operator, by explicitly
using the previous Euler angles when converting from matrix to rotation.
This basically follows the same approach as used in e4ca1fc4ea, although
the Euler Discontinuity Filter also performs single-channel filtering which
the Bake Action operator doesn't.
In glsl the clamp function has undefined behavior when min > max. For
the clamp node this resulted in differences between cycles and eevee.
This patch adds the expected implementation for minmax.
The old clamp function is still used in cases where we know for certain
that the input values are correct (math node clamp option). GPU uses
optimized code and silicon in these cases.
Some GPU platforms don't support having more than one underscore in
sequence in an attribute name. This change will remove the underscore
as a possible character when encoding to save names.
This patch introduces a partial update of GPUTexture. When rendering
a large image the GPUTexture could have been scaled. The old implementation
would rescale the image on CPU and create a new GPUTexture. This
resulted in flooding the PCI bus.
The new solution would only scale and upload the parts of the GPUTexture
that has been changed. It does this by keeping track of areas of 256x256
pixels. When something changes the tiles that cover that changes will be
rescaled and uploaded the next time the GPUTexture is requested.
Test situation: Default Cube, 4 samples, 19200x10800 tile size 512.
Blender 2.83.9: 4m27s.
Blender 2.91: 20+m (regression)
This patch: 1m01s.
There is still room for more optimizations:
* Reduce the time that an image is locked.
** Use task scheduling to update the tiles of an image.
** Generic optimization of the ImBuf scale method.
Maniphest Tasks: T82591
Differential Revision: https://developer.blender.org/D9591
The outliner already expands the panel for the modifier you click on,
this just extends that idea to also set it active, which is consistent
with behavior of active and selected items elsewhere in Blender.
After rB15083d9e1 the outliner tree is not rebuilt after expanding or
collapsing rows. Because the tree is no longer rebuilt the positions
and flags of the elements are not cleared when collapsing a row. This
caused hover highlights and selections on the collapsed child icons to
be incorrect in many cases.
For example, only the direct children of a collapsed element are drawn
inline. If any grandchild elements had been previously icon row flagged
they would continue to be evaluated as icon row elements despite being
hidden. In this case the x coordinates of the child and grandchild would
overlap causing selection to appear erratic.
Now the flags for inline row icons are explicitly cleared, which was
previously only done because the tree was rebuilt on collapsing rows.
Walk navigation relies on tablet data being set to detect if motion is
absolute. This patch sets tablet data in Ghost to dummy values when a
tablet pen is in range and not handled by Wintab processing.
Expand abbreviations for words like "Bright" (instead of "Brightness"),
"Premul", "Lib", "Dir", etc.
Differential Revision: https://developer.blender.org/D9862
Since creating the attribute node, a helper function has been added to
automatically get the input attribute or a constant value, depending on
the "input type" values for the node. This commit replaces the specific
implementation of that behavior with the new helper function.
The versioning is necessary since the node now has a "storage" struct.
Previously these HSV values were in the color picking space, which meant the
relation to the scene linear RGB values was confusing.
The new situation:
* RGB number buttons: scene linear color space
* HSV number buttons: scene linear color space
* Picker widgets: color picking color space
* Hex: sRGB color space
Fixes T69562, T83853, Ref T68926
This patch adds two related nodes, a node for separating points
and mesh vertices based on a boolean attribute input, and a node
for creating boolean attributes with comparisons.
See the differential for an example file and video.
Point Separate (T83059)
The output in both geometries is just point data, contained in the mesh
and point cloud components, depending which components had data in the
input geometry. Any points with the mask attribute set to true will be
moved from the first geometry output to the second. This means that
for meshes, all edge and face data will be removed. Any point domain
attributes are moved to the correct output geometry as well.
Attribute Compare (T83057)
The attribute compare does the "Equal" and "Not Equal" operations by
comparing vectors and colors based on their distance from each other.
For other operations, the comparison is between the lengths of the
vector inputs. In general, the highest complexity data type is used
for the operation, and a new function to determine that is added.
Differential Revision: https://developer.blender.org/D9876
This revision contains the following changes-
- Updated the existing testing framework for Modifiers for Regression
Testing.
- Tests for Physics modifiers and remaining Generate and Deform modifiers are added.
- The existing `ModifierSpec` is updated with backward compatibility to support Physics Modifiers.
- Now there is support for frame number and giving nested parameters for attributes.
- Some Deform modifiers required Object Operators, e.g. "Bind" in Mesh Deform, so a new class was added to support that functionality.
- A separate class for holding Particles System, they are tested by converting all the particles to mesh and joining it to the mesh they were added.
- Updated the format to add tests for Bevel, Boolean and Operators as
well.
Reviewed By: zazizizou, mont29, campbellbarton
Differential Revision: https://developer.blender.org/D8507
In case of being in Asset browsing mode, the search field is located in
the header (RGN_TYPE_HEADER not RGN_TYPE_UI as for file browsing mode).
To be future proof, now iterate all regions and act if the
"filter_search" can be activated.
Maniphest Tasks: T83888
Differential Revision: https://developer.blender.org/D9882
Caused by Caused by rB83980506957c.
Since above commit, the modifier was created with wrong initial values
[amount was 0.0 and offset was 1.0 -- instead of the other way around].
Since there is no way to fix existing files in a reasonable way I guess,
all we can do here is to make sure that from now on, the defaults are
correct.
Maniphest Tasks: T83886
Differential Revision: https://developer.blender.org/D9881
Currently, the random attribute node doesn't work well for most
workflows because for any change in the input data it outputs
completely different results.
This patch adds an implicit seed attribute input to the node, referred
to by "id". The attribute is hashed for each element using the CPPType
system's hash method, meaning the attribute can have any data type.
Supporting any data type is also important so any attribute can be
copied into the "id" attribute and used as a seed.
The "id" attribute is an example of a "reserved name" attribute,
meaning attributes with this name can be used implicitly by nodes like
the random attribute node. Although it makes it a bit more difficult
to dig deeper, using the name implicitly rather than exposing it as an
input should make the system more accessible and predictable.
Differential Revision: https://developer.blender.org/D9832
The size of the nodes is not enough to give enough context to users what
the sockets are about.
Minimum Distance -> Distance Min
Maximum Density -> Distance Min
Note this does not handle doversion. That means users will have to
manually.
Fix X11 library underlinking, which was breaking Debian and Ubuntu
packages.
From Ubuntu Hirsute changelog:
```
blender (2.83.5+dfsg-4ubuntu1) hirsute; urgency=medium
* Try to also link ghost library with x11, needed because of missing
XConvertSelection symbol link (used in ghost static library).
* Don't use gold, but switch to bfd linker that seems to be working better
on ppc64el.
-- Gianfranco Costamagna <locutusofborg@debian.org> Wed, 11 Nov 2020 14:17:29 +0100
```
Reviewed by: sybren
Differential Revision: https://developer.blender.org/D9617
Some weird proxies apparently can have a local collection instancing...
Not sure this is even really valid for proxies, but in any case we
cannot override that, just detect and properly cancel the operation
then.
Should be backported to 2.91.1 should we do it.
Data of the File Browser context callback needs to be validated and
return `CTX_RESULT_NO_DATA` if the context member is valid but not set
in the current context.
Callback function was using int while update_render_passes_cb_t was
using eNodeSocketDatatype leading to a build warning about different
argument types with MSVC.
Crash happens when using relative path to image in operator properties
and checking image dimensions by loading image with `IMB_loadiffname()`
Ensure path is absolute.
Crash on null dereference in `SEQ_timeline_boundbox()`. This function was
generalized in rB9e4a4c2e996c to work on arbitrary `seqbase`.
Fixed by refactoring `SEQ_timeline_boundbox()` functions to return default
sane values if `seqbase` is `NULL`
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D9878
Time is synchronized by the difference between the WT_PACKET receive
time and the last received PACKET's pkTime. This is used to prevent
Wintab packets from being prematurely expired.
This simple change sets the call_panel operator's "keep_open" property
to True for the viewport snapping panel called with `ctrl-shift-tab`.
There are quite a few settings in this panel, it often makes sense to
change more than one of them at a time, especially because multiple
snap elements can be active at the same time.
Anchored brushes with spherical falloff start off with zero radius, thus
we have no pbvh nodes on the first brush step. This would prevent
initializing the automasking cache [which only happens on the first brush
step].
Maniphest Tasks: T83856
Differential Revision: https://developer.blender.org/D9873
Since a few versions (even before 2.79) we have an option that allows to restrict the vertex tools to operate only on deform groups. This was originally implemented for working with vertex groups for skeletal animation. In that case it is fortunate to have weight tools operate only on deforming vertext groups (vgroups assigned to bones)
In previous versions of Blender (up to 2.79) we have been able to use this option in Mesh Edit mode regardless of the armature mode. The current implementation (since 2.80 as far as i know) enables this option only when the associated armature is in pose mode. this has a bad consequence:
It is not at all intuitive that you have to put the armature into Pose mode before you can make use of the option in mesh edit mode.
Besides this it is not even necessary in the case when the user wants to restrict the tool only to all pose bones. In that case the armature can safely be kept in Object mode. However, when the tool shall apply only to selected pose bones, then it actually makes sense to have the armature in pose mode (as it is implemented right now)
I do not know why this feature has been restricted as described above. It must have got lost somewhere on the way to Blender 2.90
This patch fixes the issue as it allows to select the "restrict to pose bones" option when the armature is in any mode. I see no downsides of this change, actually this is a fix for a feature that once worked and apparently got forgotten in newer releases.
Reviewed By: sybren, campbellbarton
Differential Revision: https://developer.blender.org/D9658
This commit resolves problem introduced in e1665c3d31 - it was
difficult to import media at their original resolution.
This is done by using original resolution as reference for scale.
All crop and strip transform values and their animation is converted
form old files.
To make both workflows easy to use, sequencer tool settings have been
created with preset for preffered scaling method. This setting is in
sequencer timeline header and add image or movie strip operator
properties.
Two new operators have been added:
`sequencer.strip_transform_fit` operator with 3 options: Scale To Fit,
Scale to Fill and Stretch To Fill.
Operator can fail if strip image or video is not loaded currently, this
case should be either sanitized or data loaded on demand.
`sequencer.strip_transform_clear` operator with 4 options:
Clear position, scale, rotation and all (previous 3 options combined).
Reviewed By: sergey, fsiddi
Differential Revision: https://developer.blender.org/D9582
The function is supposed to fail gracefully if there is some error. That
includes not being able to find `xdg-user-dir`. So don't let the error
be printed to the console, it's misleading/annoying.
From what I can tell we'll detect that problem fine and return NULL
then.
This adds a boolean attribute and custom data type, to be used in the
point separate node. It also adds it as supported data types in the
random attribute and attribute fill nodes.
There are more clever ways of storing a boolean attribute that make
more sense in certain situations-- sets, bitfields, and others, this
commit keeps it simple, saving those changes for when there is a proper
use case for them. In any case, we will still probably always want the
idea of a boolean attribute.
Differential Revision: https://developer.blender.org/D9818
Caused by rB7447eb7e7430.
This is just a copy-paste error [previous LISTBASE_FOREACH substitution
of marco loop in that file has a different starting point which is not
appropriate here]
Maniphest Tasks: T83851
Differential Revision: https://developer.blender.org/D9872
This patch does two things:
* Introduce a Seed to the random distribution method
* Bring in a new distribution method for the point scattering node
Patch Review: https://developer.blender.org/D9787
Note: This commit doesn't not handle doversion. Which means that users
need to manually update their files that were using the Point Distribute
node and reconnect inputs to the "Maximum Density" socket.
Original patch by Sebastian Parborg, with changes to not rely on the cy
libraries and overall cleanup.
Patch review by Jacques Lucke, besides help with the new "heap" system
that was required for this algorithm.
Based on Cem Yuksel. 2015. Sample Elimination for Generating Poisson Disk
Sample. Sets. Computer Graphics Forum 34, 2 (May 2015), 25-32
http://www.cemyuksel.com/research/sampleelimination/
This tool implements smearing for multires displacement over the limit
surface, similar to how smearing for colors and topology slide works.
When used the displacement values of the vertices "slide" over the
topology, creating the effect of smearing the surface detail.
As the brush just modifies displacement values instead of coordinates,
the total displacement of the affected area doesn't change. This means
that this smearing effect can be used multiple times over the same area
without generating any artifacts in the topology.
When the brush is used with the pinch or expand smear modes,
displacement differences are pushed into the same area, creating hard
surface effects without pinching the topology.
As any other brush that relies on the limit surface (like displacement
erasers), this will work better after using apply base.
Reviewed By: sergey, JulienKaspar, dbystedt
Differential Revision: https://developer.blender.org/D9659
Otherwise it would just show empty space where the icon is supposed to
be.
Unfortunately this icon is upscaled quite a bit and doesn't look too
great. Would be good to improve but not a high priority.
Casting pointers from one type to another does change the
value of the pointer in some cases. Therefore, casting a span
that contains pointers of one type to a span that contains
pointers of another type, is not generally safe. In practice, this
issue mainly comes up when dealing with classes that have a
vtable.
There are some special cases that are still allowed. For example,
adding const to the pointer does not change the address.
Also, casting to a void pointer is fine.
In cases where implicit conversion is disabled, but one is sure
that the cast is valid, an explicit call of `span.cast<NewType>()`
can be used.
When doing a debug build on windows, blender will
start with the following warning:
"Unable to find the python binary, the multiprocessing
module may not be functional!"
The root cause for this issue is: for a debug build
the python binary is called python_d.exe rather than
just python.exe
This change fixes BKE_appdir_program_python_search
to look for the _d suffix for debug builds on windows
Differential Revision: https://developer.blender.org/D9775
Reviewed by: Campbell Barton
We do not generate overrides for missing data-blocks (aka placeholder
ones) anymore, and properly delete the remaining old overrides of those
during the resync process.
This should prevent constant 'missing data-blocks' messages when opening
blend files with overrides whose libraries have beed edited.
Issue reported by @andy from Blender studio, thanks.
ratio
Caused by rB4eda60c2d82d.
T83801 reported not moving in pixel space, but even without that toggle
above commit caused the translation to not take apsect ratio into
account properly [a translation of 1 on the x axis for example on an
image with non 1:1 aspect ration caused the UVs to not end up in the
same place on the next 'tile']
Above commit removed 'removeAspectRatio()' [the counterpart of
applyAspectRatio -- which does the pixel coord correction internally]
from 'applyTranslation()'.
This was also reported in T83352 [which was closed by rBf3b08af24c9f --
but that only solved the displax in header, not the actual
transformation]
Now bring back 'removeAspectRatio()'.
Maniphest Tasks: T83801
Differential Revision: https://developer.blender.org/D9869
Fix T83415: 3D View is red when using stereo
The red view was caused by SRGB not being enabled for an SRGB texture attached to the framebuffer.
Currently, when configuring a framebuffer, the first texture attachment needs to be an SRGB format in order for the framebuffer to be binded with SRGB enabled.
Thus, simply changing the SRGB texture attachment as the first texture attachment removes the red color in the view.
Reviewed By: #eevee_viewport, jbakker
Maniphest Tasks: T83415
Differential Revision: https://developer.blender.org/D9845
Issue was that not all code paths were taken to determine if
the GPU Texture was premultiplied or not. In this case the result
was set to unpremultiplied what is incorrect.
This fixes broken test case image alpha blend from image_colorspace.
This data structure adds priority queue functionality to an existing array.
The underlying array is not changed. Instead, the priority queue maintains
indices into the original array.
Changing priorities of elements dynamically is supported, but the priority
queue has to be informed of such changes.
This data structure is needed for D9787.
This change is a simple null check on the ID provided to icon_set_image() which
appears to be a legitimate value for the ID when used by some addins
(discovered with PowerSave shortly after syncing to main).
Differential Revision: https://developer.blender.org/D9866
Reviewed by: Julian Eisel
It's useful to easily see which data-blocks are assets and which not. So just
like we usually show the library linking/override icons, we show the asset icon
there (these are mutually exclusive data-block states).
Uses the `'MAT_SPHERE_SKY` icon, which wasn't used before (except by an
add-on!) and is sorta fitting, but not quite. We should either change this one
or add an own asset icon. Meanwhile this isn't too bad :)
Also adds an internal macro to check if a data-block is an asset, consistent to
how we do it for libraries and library overrides.
This makes it possible to trigger a refresh of the data-block preview,
available next to the preview in the Asset Browser sidebar. The previews get
easily outdated and automatically refreshing it all the time is not an option
because it would be a consistently running, quite expensive process. So a
button to cause a refresh should be reasonable.
This button can also be used to switch back from a custom preview to a
generated one. Although that may not be clear, and we should probably think of
a way to explain that better.
Addresses T82719.
The current layout wasn't great at all, and it was planned to polish this. This
does a first round of improvements, some more tweaking may follow.
* Place name button at the top, with no panel and no leading label.
* Add "Preview" panel, people may not want to see the preview all the time,
it's already visible in the file list.
* Move button to browse for a custom preview to the right of the preview, as
icon-only. We have a similar layout in other places (UI-lists, matcaps).
* Don't make the details panel a sub-panel. Looked weird because the parent
doesn't have a header.
* Add info icon to "No asset selected", looks a bit friendlier.
* Minor cleanups in the UI script.
Based on designs and feedback by William Reynish.
This is something we wanted to support doing. It's confusing if users see the
name but it's always grayed out. So be convenient and avoid the confusion.
Script tool for automation of Steam build files for tasks like {T77348}
This script automates creation of the Steam files: download of the archives,
extraction of the archives, preparation of the build scripts (VDF files), actual
building of the Steam game files.
Requirements
============
* MacOS machine - Tested on Catalina 10.15.6. Extracting contents from the DMG
archive did not work Windows nor on Linux using 7-zip. All DMG archives tested
failed to be extracted. As such only MacOS is known to work.
* Steam SDK downloaded from SteamWorks - The `steamcmd` is used to generate the
Steam game files. The path to the `steamcmd` is what is actually needed.
* SteamWorks credentials - Needed to log in using `steamcmd`.
* Login to SteamWorks with the `steamcmd` from the command-line at least once -
Needded to ensure the user is properly logged in. On a new machine the user
will have to go through two-factor authentication.
* App ID and Depot IDs - Needed to create the VDF files.
* Python 3.x - 3.7 was tested.
* Base URL - for downloading the archives.
Reviewed By: Jeroen Bakker
Differential Revision: https://developer.blender.org/D8429
Motivated by `std::string_view` being usable in
const (compile-time) context.
One functional change was needed for StringRef:
`std::char_traits<char>::length(str)` instead of `strlen`.
Reviewed By: JacquesLucke, LazyDodo
Differential Revision: https://developer.blender.org/D9788
Add panels with overlay settings for strips and preview and overlay
enable/disable button.
Entries from the View menus moved to the overlay panels, which will
simplify cluttered View menus.
Additional options have been added:
- Strip Name
- Strip Source(ex. path)
- Strip Duration
So users can now select what info they need to see on the strips. When
No text is displayed, waveforms are drawn in full height.
Reviewed By: ISS, HooglyBoogly, pablovazquez
Differential Revision: https://developer.blender.org/D9751
When in Sequencer/Preview mode, the Sampler was on top, which normally
is the place of Select, and Annotation seems to be after Sampler in the
bottom in the various editors.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D9821
Paste copied strips after playhead, because this is more intuitive.
Previous functionality is still available by enabling "Keep Offset"
property, or under shortcut Ctrl+Shift+V.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D9734
Use the BKE_gpencil_stroke_uniform_subdivide function to subdivide strokes
before interpolation. When the target/source stroke is smaller than the other
stroke, it is subdivided until the lengths match. This improves the overall quality
of the interpolation of different sized strokes.
Before/After video:
{F9511779}
Reviewed By: #grease_pencil, antoniov, pepeland, mendio
Differential Revision: https://developer.blender.org/D9839
This patch adds the option to make the random scaling from the grease pencil array modifier uniform.
The current settings allow a separate value for each of the 3 scaling axis. The modifier also creates different seed values for each axis so there is no way to keep the random scaling uniform.
This patch creates 1 random seed value and applies it to each of the scaling axis.
Here is a demonstration of the previous behavior and the new optional behavior.
{F9485973}
{F9485981}
{F9485798}
Reviewed By: #grease_pencil, antoniov, pepeland
Differential Revision: https://developer.blender.org/D9764
Logic was broken into finding gaps and ofsetting strips.
Functions were modified so they work on explicitly defined seqbase,
so they can be used as python API functions.
Functional changes:
- Improve performance by calculating gap length and offseting strips
at once. Previously strips were offset by one frame.
- Calculate gap from start frame. Previously gap was considered only
inbetween strips.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9730
If Preferences > Interface > Temporary Editors > File Browser is set to
"Maximized Area", "Load Custom Preview" in the Asset Browser would crash
after selecting the file.
1e799dd26e was important to get this issue fixed. This commit just
ensures the file-list is recreated correctly after closing the temporary
File Browser, so the custom preview operator can execute on valid
context.
If Preferences > Interface > Temporary Editors > File Browser is set to
"Maximized Area", opening a File Browser from a File or Asset Browser as
regular editor would cause some issues. For example after closing the
temporary File Browser, the regular browser would take over the file
path and display settings from the temporary one. This is because they
used to share the same area data.
Some similar issues may have happend with temporary image editors.
Now, this commit finally separates the space data of temporary maximized
editors from the regular ones. So the editor data is entirely
independent now, as it should be.
This implements a mesh fairing algorithm and implements the fair
operations for Face Set edit. This edit operations create a smooth as
possible geometry patch in the area of the selected Face Set.
The mesh fairing algorithm is designed by Brett Fedack for the addon
"Mesh Fairing": https://github.com/fedackb/mesh-fairing, with some
modifications:
- The main fairing function in BKE_mesh_fair.h does not triangulate
the mesh. For the test I did in sculpt mode results are good enough
without triangulating the topology. Depending on the use and the
result quality needed for a particular tool, the mesh can be
triangulate in the affected area before starting fairing.
- Cotangents loop weights are not implemented yet. The idea is to
also expose the vertex and loop weights in a different function in
case a tool needs to set up custom weights.
This algorithm will also be used to solve the limitations of line
project and implement the Lasso Project and Polyline Project tools.
It can also be used in tools in other areas of Blender, like Edit Mode
or future retopology tools.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D9603
The boolean solver crashes when there is no geometry in the mesh. Also,
using the trimming tools without a valid intersection in the PBVH will
make the orientation and position functionality of the trimming shape
not work, so this is the safer solution.
Reviewed By: mont29
Maniphest Tasks: T83504
Differential Revision: https://developer.blender.org/D9777
The if statement of the dynamic area mode branch should be an else if.
When using local mode, this was running both the local and global code.
I moved this code to sculpt_cloth and refactored it to use a switch case
to prevent this from happening again.
Reviewed By: mont29
Maniphest Tasks: T83201
Differential Revision: https://developer.blender.org/D9762
This was reported for duplicating particle systems, then using F9 to
enable the 'Duplicate Settings' option (see T83317).
In this case, the operator gets the particle_system from (buttons)
context and if none can get found will duplicate all settings instead.
The reason why none gets found here is that buttons_context() doesnt
have a valid path when called from F9/SCREEN_OT_redo_last, path is
cleared when global undo does a file-read which clears the path (see
lib_link_workspace_layout_restore). It can be recomputed though to be
valid even from redo_last (at least when in the Properties Editor).
This was likely causing other operators (relying on buttons context)
from the Properties Editor to fail as well.
Fixes T83317
Maniphest Tasks: T83317
Differential Revision: https://developer.blender.org/D9825
If Preferences > Interface > Temporary Editors > File Browser is set to
"Maximized Area", opening a File Browser from an Asset Browser would
cause the new maximized editor to be an Asset Browser. Exiting it again
would crash.
This fixes the wrong behavior and the crash. There's still an issue with
exiting the editor again, it stays a File Browser then and doesn't go
back to being an Asset Browser. That's to be fixed separately.
`blf_dir_search` BLF util would not properly handle relative fonts not
found in pre-defined 'system fonts' directoriesi stored in
`global_font_dir` global variable.
Now it rebases relative paths to current .blend file location as
expected.
Note: the fact that VSE is setting font ptaths relative by default is
probably not actually desired, but this is another issue really. See
`BKE_sequencer_text_font_load` code.
Storing the asset library reference by name wasn't a good idea, I thought it
would work with a careful fallback, but it's easier to just use the index
instead. So change to using indices, make sure fallback methods work reliable
and make sure the file list is updated when asset libraries are removed.
I added a new notifier type for the latter, I prefer not using file notifiers
in asset-library/preferences code. We have more than enough values for
notifiers left.
The `!BKE_previewimg_is_finished()` in `icon_preview_startjob_all_sizes()`
would fail.
Caused by 990bd9acf243ae. We have to be more picky about tagging previews as
unfinished after file read. But we also have to consider files stored in old
versions and set the unfinished tag as needed.
When the Asset Browser was showing the "Current File" repository and the
sidebar was open, undoing could crash, because the context API returned freed
data.
Don't let context return anything if a refresh is pending due to data changes
like undo/redo.
In D9722 we agreed on using `[home-directory]/Documents/Blender/Assets` for
the default asset library. I just forgot to do the change before committing.
(The default repository is just a named path, it's *not* a default library with
bundled assets.)
Previews would be flagged as unfinished when reading. Instead clear the flag
and always consider them finished upon reading. If we wouldn't do this, the
File Browser would keep running the preview updating to wait for the preview to
finish. It could be smarter and also check if there's actually a preview job
running.
Instead, I think it will just display an unfilled buffer for now. Up until
today we wouldn't even know if a stored preview is finished or not, so it would
always assume they are finished. We do the same now, but have the option to
make it smarter.
This introduces the User Interface part of the Asset Browser, based on the
design in T54642.
Additions:
* New Asset Browser (internally a sub-editor of the File Browser).
* Navigation region showing asset categories.
* Main region showing the assets of the selected asset library with previews.
The assets may be stored over multiple .blends in the directory that's
"mounted" as asset library in the Preferences. They will all be shown in this
list.
* Header with an asset library dropdown, allowing to choose the active asset
library to show. Options are the "Current File" as asset library and all
custom libraries.
* Display popover, filter popover and search box (partially dummies, see
T82680).
* Sidebar showing the metadata of the currently active file (name, preview,
description and tags), which can be edited for assets in the "Current File"
asset library. (For others it will reset on reload.)
* The sidebar includes a button to load a custom preview image from a file.
* Make asset files draggable (with preview image).
* If a library with invalid path is selected, a message is drawn in the main
region to help the user understand what's wrong.
* Operators to add and remove asset tags. Exposed in the sidebar.
* "Only Assets" option for Link/Append.
* Internal utilities for asset UI scripts.
For screenshots or demo videos, please see D9725. Or the 2.92 release notes.
Note that there are many things to be tweaked and polished in the Asset Browser
UI still. For example, the filter and display popovers are mostly dummies. See
T82680.
Part of the first Asset Browser milestone. Check the #asset_browser_milestone_1
project milestone on developer.blender.org.
Differential Revision: https://developer.blender.org/D9725
Reviewed by: Brecht Van Lommel, Hans Goudey
The Asset Browser will be a sub-editor of the File Browser. This prepares the
File Browser code for that.
**File-Lists**
* Support loading assets with metadata read from external files into the
file-list.
* New main based file-list type, for the "Current File" asset library.
* Refresh file-list when switching between browse modes or asset libraries.
* Support empty file-lists (asset library with no assets).
* Store file previews as icons, so scripts can reference them via icon-id. See
previous commit.
**Space Data**
* Introduce "browse mode" to differeniate between file and asset browsing.
* Add `FileAssetSelectParams` to `SpaceFile`, with `FileSelectParams` as base.
Makes sure data is separated between asset and file browsing when switching
between them. The active params can be obtained through
`ED_fileselect_get_active_params()`.
* `FileAssetSelectParams` stores the currently visible asset library ID.
* Introduce file history abstraction so file and asset browsing can keep a
separate history (previous and next directories).
**General**
* Option to only show asset data-blocks while file browsing (not exposed here).
* Add "active_file" context member, so scripts can get and display info about
the active file.
* Add "active_id" context member, so `ED_OT_lib_id_load_custom_preview` can set
a custom ID preview. (Only for "Current File" asset library)
* Expose some of `FileDirEntry` in RNA as (non-editable). That way scripts can
obtain name, preview icon and asset-data.
Part of the first Asset Browser milestone. Check the #asset_browser_milestone_1
project milestone on developer.blender.org.
Differential Revision: https://developer.blender.org/D9724
Reviewed by: Bastien Montagne
One of the core design aspects of the Asset Browser is that users can "mount"
custom asset libraries via the Preferences. Currently an asset library is just
a directory with one or more .blend files in it. We could easily support a
single .blend file as asset library as well (rather than a directory). It's
just disabled currently.
Note that in earlier designs, asset libraries were called repositories.
Idea is simple: In Preferences > File Paths, you can create custom libraries,
by setting a name and selecting a path. The name is ensured to be unique. If
the name or path are empty, the Asset Browser will not show it in the list of
available asset libraries.
The library path is not checked for validity, the Asset Browser will allow
selecting invalid libraries, but show a message instead of the file list, to
help the user understand what's going on.
Of course the actual Asset Browser UI is not part of this commit, it's in one
of the following ones.
{F9497950}
Part of the first Asset Browser milestone. Check the #asset_browser_milestone_1
project milestone on developer.blender.org.
Differential Revision: https://developer.blender.org/D9722
Reviewed by: Brecht Van Lommel, Hans Goudey
For the Asset Browser, it needs to be possible to drag assets into various
editors, which may not come from the current .blend file. In other words, the
dragging needs to work with just the asset metadata, without direct access to
the data-block itself.
Idea is simple: When dragging an asset, store the source file-path and
data-block name and when dropping, append the data-block. It uses existing drop
operators, but the function to get the dropped data-block is replaced with one
that returns the local data-block, or, in case of an external asset, appends
the data-block first.
The drop operators need to be adjusted to use this new function that respects
assets. With this patch it only works for dragging assets into the 3D view.
Note that I expect this to be a short-lived change. A refactor like D4071 is
needed to make the drag & drop system more future proof for assets and other
use cases.
Part of the first Asset Browser milestone. Check the #asset_browser_milestone_1
project milestone on developer.blender.org.
Differential Revision: https://developer.blender.org/D9721
Reviewed by: Bastien Montagne, Brecht Van Lommel
* Support defining (not necessarily rendering) icons in threads. Needed so the
File Browser can expose file previews with an icon-id to scripts.
** For that, ported `icons.c` to C++, to be able to use scope based mutex locks
(cleaner & safer code). Had to do some cleanups and minor refactoring for
that.
* Added support for ImBuf icons, as a decent way for icons to hold the file
preview buffers.
* Tag previews as "unfinished" while they render in a thread, for the File
Browser to dynamically load previews as they get finished.
* Better handle cases where threaded preview generation is requested, but the
ID type doesn't support it (fallback to single threaded). This is for general
sanity of the code (as in, safety and cleanness)
* Enabled asset notifier for custom preview loading operator, was just disabled
because `NC_ASSET` wasn't defined in master yet.
Part of the first Asset Browser milestone. Check the #asset_browser_milestone_1
project milestone on developer.blender.org.
Differential Revision: https://developer.blender.org/D9719
Reviewed by: Bastien Montagne, Brecht Van Lommel
This makes it possible to turn data-blocks into assets and back into normal
data-blocks. A core design decision made for the asset system is that not every
data-block should be an asset, because not every data-block is made for reuse.
Users have to explicitly mark data-blocks as assets.
Exposes "Mark Asset" and "Clear Asset" in Outliner context menus (currently ID
Data submenu) and button context menus. We are still not too happy with the
names, they may change.
This uses the new context members to pass data-blocks to operators, added in
af008f5532 and 0c1d476923.
Part of the first Asset Browser milestone. Check the #asset_browser_milestone_1
project milestone on developer.blender.org.
Differential Revision: https://developer.blender.org/D9717
Reviewed by: Brecht Van Lommel
Asset metadata is what turns a regular data-block into an asset. It is a small
data-structure, but a key part of the technical design of the asset system.
The design foresees that asset data-blocks store an `ID.asset_data` pointer of
type `AssetMetaData`. This data **must not** have dependencies on other
data-blocks or data-block data, it must be an independent unit. That way we can
read asset-metadata from .blends without reading anything else from the file.
The Asset Browser will use this metadata (together with the data-block name,
preview and file path) to represent assets in the file list.
Includes:
* New `ID.asset_data` for asset metadata.
* Asset tags, description and custom properties.
* BKE code to manage asset meta-data and asset tags.
* Code to read asset data from files, without reading IDs.
* RNA for asset metadata (including tags)
Part of the first Asset Browser milestone. Check the #asset_browser_milestone_1
project milestone on developer.blender.org.
Differential Revision: https://developer.blender.org/D9716
Reviewed by: Bastien Montagne, Brecht Van Lommel
The geometry-nodes features no longer depend on the point cloud object.
Therefore the point cloud object, although important in the future, can
be postponed until we have render and edit mode fully working.
This reverts commits:
* ea74ed5a7a.
* dc614c68ef.
This implements the design proposed in T83357.
The goal is to allow the geometry nodes modifier on mesh objects to
output instances and potentially other geometry types. Both problems
are tackled by allowing mesh objects to evaluate to a geometry set,
instead of just a single mesh id data block. The geometry set can
contain a mesh but also other data like instances and a point cloud.
I can't say that I'm sure that this commit won't introduce bugs. Mainly
the temporary object creation during rendering seems a bit brittle.
BUT, we can be reasonably sure that this commit will not introduce
regressions (at least not ones, that are hard to fix). This is because
the code has been written in a way that minimizes changes for existing
functionality.
Given that we intend to hide the point cloud object for the next release,
we won't even have to worry about temporary object creation for now.
An important part of the technical design is to make sure that
`ObjectRuntime->data_eval` contains the same data before and after this
patch. This helps to make sure, that existing code paths are impacted as
little as possible.
Instead of fully replacing `data_eval`, there is `geometry_set_eval`,
which contains all the geometry components an object evaluated to
(including the data referenced by `data_eval`).
For now, not much code has to be aware of `geometry_set_eval`. Mainly
the depsgraph object iterator and the instances system have to know
about it.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D9851
The matte_id is stored in a different structure in 2.92. This patch will
write the old matte_id field so the files can be opened correctly in
older versions.
Apparently the ID pointer can be NULL, which most code here assumes is
not the case. But it's very fragile & finicky, there is one code path
were it's allowed to be NULL.
Add necessary NULL-checks, an assert as sanity check and a comment to
note the possibility of NULL.
Remove DNA headers, using forward declarations where possible.
Also removed duplicate header, header including it's self
and unnecessary inclusion of libc system headers from BKE header.
See T82309#1055564 {T63675} and their duplicates for how Default-off
can cause confusion.
This is just for convenience since it allows animators to keyframe
outside of the strip's bounds by default. This was likely off by
default before since Syncing Length would undesirably shift the whole
animation after leaving tweak mode (fixed by {D7602}) and the animator
wasn't able to keyframe outside the strip bounds anyways
(fixed by {D7533}). Now it's better if the flag was on by default.
While the animator is still roughly developing their animation NLA-wise
they won't have to worry about strip bound keying failures. When they
are more certain of the strip bounds, they can disable the flag to
prevent affecting the rest of the NLA system.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D9661
It's an explicit check to prevent division by zero if caller hasn't
done the check. Future patch {D8867} will not use the nla remap
function and thus not do the check. This patch also replaces some
float (==) equality checks with IS_EQF().
Split from {D9247}
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D9694
And removes redundant index local variable. Future patches {D8296} and
{D8867} make use of this function.
No functional changes.
Split from {D9247}
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D9693
The strips were given the wrong owner ID. This only caused issues for
python based UI as far as I know. Property changes would not properly
update the viewport.
Reviewed By: lichtwerk
Differential Revision: https://developer.blender.org/D9685
This commit adds a simple utility function for getting the data type of an
attribute or its "constant" socket counterparts. No functional changes.
Differential Revision: https://developer.blender.org/D9819
Issues were:
* Abusing of `WITH_PYTHON_INSTALL_NUMPY` by both Audaspace and
Mantaflow.
- `PYTHON_INSTALL` options only decide whether we copy python (and
some extra modules) in our Blender installation. On linux it
makes much more sense to use global python installation.
- Now we have instead a proper `WITH_PYTHON_NUMPY`
* Bad assumptions regarding path of headers relative to path of python
module.
- In current Debian testing, modules are under `python3.9`
directory, while headers are under `python3` directory.
- Now we properly `find_path` for headers as well, modifying
`find_python_package` to take an optional argument for headers.
Note that the required changes done to `extern` libraries are in
blender-specific files that do not exist upstream.
Differential Revision: https://developer.blender.org/D9773
This changes the way how the mattes are stored in the compositor node. This used to
be a single string what was decoded/encoded when needed. The new data structure
stores all entries in `CryptomatteEntry` and is converted to the old `matte_id`
property on the fly.
This is done for some future changes in the workflow where a more structured
approach leads to less confusing and easier to read code.
Sometimes the geometry nodes modifier does support mapping and
sometimes it does not. We have no infrastruture to determine this ahead
of time currently. In order to support common use cases, it makes sense
to add this flag to the modifier.
One such common use case is to use the mesh as surface that other
things are distributed on. Often, the distribution is controlled by vertex
groups. Therefore, it would be helpful if the modifier is evaluated
when the object is in vertex paint mode. This allows the user to see the
distributed objects while painting.
If the nodes modifier transforms the mesh in any way, vertex painting
might not work as expected anymore, because the `deformMatrices`
callback is not implemented. I'm not sure how this can be solved nicely, yet.
Without this, the modifier evaluation code might remove any
vertex groups from the mesh for performance reasons.
We can't say for sure whether the node group will need the vertex
groups, but it is quite likely.
Ref T83357.
This patch will add volumetric transmittance to the cryptomatte coverage
data of all samples when post processing the cryptomatte passes.
It was discussed with Cycles that this is desired, but tricky to
implement in Cycles.
The shaders were not tagged for a needed geometry update when the displacement method was modified, neither were the Geometry and Object managers.
Reviewed By: kevindietrich
Maniphest Tasks: T75539
Differential Revision: https://developer.blender.org/D8896
Object previews are really helpful for visual data-block selection, like asset
browsing. Having them be generative should also be quite handy and should work
well enough in many, if not most cases.
What this does is simple:
* Place the object (actually a deep copy of it, for thread safety) in a virtual
.blend into an empty scene/view-layer.
* Add a camera, point it towards the front of the object, assuming that means
pointing towards its +Y axis.
* Use "Camera Fit Frame to Selected" logic to put the object into frame.
* Create a threaded off-screen render.
Of course, such an automatic preview will not work in all situations. E.g. it
currently does a bad job capturing a single plane. We could add options for
more advanced automatic previews, but probably custom previews is more
important, which I committed already (812ea91842).
Part of the first Asset Browser milestone. Check the #asset_browser_milestone_1
project milestone on developer.blender.org.
Reviewed as part of https://developer.blender.org/D9719.
Reviewed by: Bastien Montagne, Brecht Van Lommel
Required changes to make it compile with clang tidy:
* Use c++ includes like (e.g. climits instead limits.h).
* Insert type casts when casting from void* to something else.
* Replace NULL with nullptr.
* Insert casts from int to enum.
* Replace designed initializers (not supported in C++ yet).
* Use blender::Vector instead of BLI_array_staticdeclare (does not compile with C++).
* Replace typedef statements.
Ref T83357.
No automatic preview generation will ever be good enough to cover all cases
well. So custom preview images are a must for a preview driven data-block
selection - like for asset browsing.
The operator simply allows selecting an image file, which will then be read and
copied into the data-blocks preview (resized if necessary).
There's no UI for this currently and the operator won't be available in the
search menu yet. It will later once the Asset Browser UI is merged.
Reviewed as part of https://developer.blender.org/D9719.
Reviewed by: Bastien Montagne, Brecht Van Lommel
This commit removes geometry from meshes and shapekeys, and embedded
files, from liboverride IDs.
This data is never overrideable, there is no reason to store extra
useless copies of it in production files.
See T78944.
Note that we may add more data to be skipped on write for liboverrides
in the future, but this commit should address all the most important
cases already.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D9810
Issues were:
* Abusing of `WITH_PYTHON_INSTALL_NUMPY` by both Audaspace and
Mantaflow.
- `PYTHON_INSTALL` options only decide whether we copy python (and
some extra modules) in our Blender installation. On linux it
makes much more sense to use global python installation.
- Now we have instead a proper `WITH_PYTHON_NUMPY`
* Bad assumptions regarding path of headers relative to path of python
module.
- In current Debian testing, modules are under `python3.9`
directory, while headers are under `python3` directory.
- Now we properly `find_path` for headers as well, modifying
`find_python_package` to take an optional argument for headers.
Note that the required changes done to `extern` libraries are in
blender-specific files that do not exist upstream.
Differential Revision: https://developer.blender.org/D9773
This adds the missing options for the effects as it is done in modifiers.
Reviewed By: HooglyBoogly
Maniphest Tasks: T83696
Differential Revision: https://developer.blender.org/D9838
In Cycles the volume transmittance is already composited into the color
passes. In Eevee the volume transmittance pass was separate and needed
to be composited in the compositor. This patch adds the volume
transmittance pass direct in the next render passes:
* Diffuse Color
* Specular Color
* Emission
* Environment
This patch includes the removal of the volume transmittance render pass.
It also renames the volume render passes to match Cycles. The setting
themselves aren't unified.
Maniphest Tasks: T81134
This should be a final piece of the changes for the active modifier
interface. Before, it was necessary to click on the blank space of a
modifier panel to set it active (not the header), this commit allows
clicking on the icon also.
The spacing with the spacing with the expand button would ideally
be a bit larger, but the layout system doesn't offer much flexibility
here.
Node tree types from addons were selectable in the modifier's drop-down.
Obviously they didn't do anything, but it shouldn't be possible anyway.
This was just caused by an unimplemented poll function.
Approximately 33 changes of capitalization to conform to MLA title style.
Differential Revision: https://developer.blender.org/D9796
Reviewed by Julian Eisel
This makes the exact boolean have zero weights for any vertex groups
on any newly created vertices, which is what the fast solver does.
The exact boolean solver was interpolating vertex data when interpolating
loop data in newly created faces. Not sure why I chose that. The Fast
boolean solver doesn't do that, so I stopped doing it too.
Using 'is/means/equal' words in place of equal sign in descriptions.
Differential Revision: https://developer.blender.org/D9799
Reviewed by Hans Goudey
Could not select left quarter of the screen in stereo side-by-side mode on high dpi displays.
Differential Revision: https://developer.blender.org/D9836
Reviewed by Julian Eisel
New dialog box layout with large alert icon for the Python script execution warning popup.
Differential Revision: https://developer.blender.org/D9390
Reviewed by Hans Goudey
Remove 'U.wheellinescroll' preference, currently hidden and unused.
Differential Revision: https://developer.blender.org/D9616
Reviewed by Brecht Van Lommel
It turns out that after the fix to T83196 (rB814b2787cadd) the matrix
to quaternion conversion can produce noncanonical results in large
areas of the rotation space, when previously this was limited to
way smaller areas. This in turn causes Swing+Twist math to produce
angles beyond 180 degrees, e.g. outputting a -120..240 range.
This fixes both issues, ensuring that conversion outputs a canonical
result, and decomposition canonifies its input.
This was reported in chat by @jpbouza.
As a followup for rB2b3d85d7d6771, this commit adds the remove and
copy operators for grease pencil modifiers, effects, and constraints
where they apply.
If the destination layer hadn't keyframe, a new keyframe was added and later the merge layer strokes were added, but this could change the animation because the new frame replaced the old drawings of the target layer.
Now, before merge the layer, all keyframes are added in the target layer in order to keep the drawings.
This patch introduces a new BKE function that performs a uniform subdivide.
The goal of this function is to subdivide the stroke to reach a target number of points while maintaining its shape, color, and weights.
This is done by repeatedly subdividing the longest edge in the stroke. Every subdivision adds a new point at the exact middle point of an edge.
The function is intended to be used in the interpolation operators to give better results when interpolating between different sized strokes.
Reviewed By: antoniov
Differential Revision: https://developer.blender.org/D9835
This is similar to c4a2067130130d, but applies to the general UI and is only
about single data-blocks. Here there was a similar problem: How can buttons
pass the data they represent to operators? We currently resort to ugly ad-hoc
solutions like `UI_context_active_but_get_tab_ID()`. So the operator would need
to know that it is executed on a tab button that represents a data-block.
A single button can now hand operators a data-block to operate on. The operator
can request it via the "id" context member (`CTX_data_pointer_get_type(C, "id",
&RNA_ID)` in C, `bpy.context.id` in .py).
In this commit, it is already set in the following places:
* Generic RNA button code sets it to the pointed to data-block, if the button
represents a data-block RNA pointer property. (I.e for general data-block
search buttons.)
* Data-block selectors (`templateID`) set it to the currently active data-block.
* The material slot UI-List sets it for each slot to the material it represents.
The button context menu code is modified so its operators use the context set
for the layout of its parent button (i.e. `layout.context_pointer_set()`).
No user visible changes. This new design isn't actually used yet. It will be
soon for asset operators.
Reviewed as part of https://developer.blender.org/D9717.
Reviewed by: Brecht Van Lommel
The way the Outliner integrates operations on selected tree elements is known
to be quite problematic amongst developers. The context menu is generated in an
unusual way and doesn't use the normal operator system. Instead, changes are
applied via a recursive callback system. Things are quite ad-hoc, and the
callbacks often implement logic that should not be in the Outliner, but in
entirely different modules. Often these modules already contain the logic, but
as proper operators.
This commit is a step into a hopefully better direction that should allow us to
put actual operators into Outliner context menus. It starts solving the problem
of: How can the Outliner pass selected data to operators. It implements it for
data-blocks only, but other data could do it in the same way.
Idea is to keep doing what operators were initially designed to do: Operate on
context.
Operators can now query a "selected_ids" context member
(`CTX_data_selected_ids()` in C, `bpy.context.selected_ids` in .py). If an
Outliner is active, it will generate a list of selected data-blocks as a
response, via its `SpaceType.context` callback.
Any other editor could do the same.
No user visible changes. This new design isn't actually used yet. It will be
soon for asset operators.
Reviewed as part of https://developer.blender.org/D9717.
Reviewed by: Brecht Van Lommel
BLI_getenv has always incorrectly returned ascii rather
than UTF-8. This change corrects this behaviour.
This resolves issues when the `BLENDER_USER_CONFIG`
environment variable contains a path with Unicode characters
on windows as reported in T74510 (but unlikely the root
cause for the issue at hand there)
Differential Revision: https://developer.blender.org/D9831
Reviewed by: brecht
Don't refuse to load 5-channel images, instead drop any channels after the 4th
and hope that the first channels represent RGBA.
Differential Revision: https://developer.blender.org/D9820
The flag syncing code expects to find collection flags in same view
layer before and after the move, it even has an assert for it. However,
there is one case where this doesn't happen, when dragging a collection
that exists in two scenes to the master collection.
This commit removes this assert, frees the temporary flag structs
separately, and updates some comments with this information.
There is more detail in the adjusted comment.
Differential Revision: https://developer.blender.org/D9785
Root of the issue was missing management of ID pointers in the cloth
modifier data stored in ParticleSystem for hair physics, in the
'foreach_id' particle system code.
Using modifier's 'foreach_id' code in psys one unfortunately requires
some ugly conversion gymnastics, but this is still better than having
dedicated code for that case.
Note that this is actually a fairly critical issue, fix should be
backported to 2.91.1 should we do it, and to 2.83 LTS as well I think.
This document helps Blender users to known what is the library of each
individual 3rd party components that Blender depend on.
Generated using:
https://github.com/amzn/oss-attribution-builder
This is based on the libraries in extern and the svn libraries.
For the libraries in extern the README.blender was used as reference.
For the libraries in svn I used `cmake/versions.cmake`.
Note that the crediting is a bit of hit and miss. For some projects this
is very clear, while for others I had to do some digging. Either way I
gave my best shot.
The sources to (re-)generate this file is local at the moment. But it
should be moved to our infra-structure at some point.
Differential Revision: https://developer.blender.org/D9798
The Point Instance node can instance entire collections now.
Before, only individual collections were supported.
Randomly selecting objects from the collection on a per point basis
is not support, yet.
Last part of D9739.
Ref T82372.
The implementation is pretty much the same as for Object sockets.
The socket color is the one that is used for collections in the outliner.
Part of D9739.
Based on testing by Intel, rendering on Iris GPUs and upcoming Xe GPUs
should work. This is enabled on Windows and Linux.
More testing is needed to verify correctness and performance in production
scenes, but our basic benchmark files seem to give correct results.
Scale Mac trackpad scrolling changes by pixel size of output device.
Differential Revision: https://developer.blender.org/D9723
Reviewed by Brecht Van Lommel
The previous `BKE_appdir_folder_default()` was confusing, it would return the
home directory on Linux and macOS, but the Documents directory on Windows.
Plus, for the Asset Browser, we want to use the Documents directory for the
default asset library on all platforms.
This attempts to clean up the API to avoid confusion, while adding the newly
needed functionality.
* `BKE_appdir_folder_default()` should behave as before, but the implementation
changed:
** Removes apparently incorrect usage of `XDG_DOCUMENTS_DIR` on Unix systems -
this seems to be a config file variable, not an environment variable. Always
use `$HOME` instead, which this ended up using anyway.
** On Windows it doesn't attempt to use `%HOME%` anymore and gets the Documents
directory directly.
* Add `BKE_appdir_folder_home()` to gives the top-level user directory on all
platforms.
* Add `BKE_appdir_folder_documents()` to always get the user documents
directory on all platforms.
There should be no user noticable behavior change.
Differential Revision: https://developer.blender.org/D9800
Reviewed by: Brecht Van Lommel
When we had to get special user directories, we'd usually do it in varying,
rather ad-hoc ways. It would be done with a bunch of `#ifdef`s for the
different operating systems. Also, some of the used Win32 functions were legacy
ones and the API docs recommend using newer ones.
Further, seems `BKE_appdir_folder_default()` used `XDG_DOCUMENTS_DIR` wrong.
It's not supposed to be an environment variable but a value inside a config
file.
This adds the platform dependent logic to Ghost, so we can abstract it away
nicely using the `GHOST_ISystemPaths` interface. Getting the desktop directory
for example can now easily be done with:
`GHOST_getUserSpecialDir(GHOST_kUserSpecialDirDesktop).`
For now I added the logic for desktop, documents, downloads, videos, images and
music directories, even though we only use the Documents one. We can extend/
change this as needed, it's easy to do now.
On Windows and macOS, it uses pretty much the same way to access the
directories as elsewhere already. On Linux, it uses the `xdg-user-dir` command
that seems to be available by default on most Linux systems.
No functional changes. The new queries are not actually used yet.
Differential Revision: https://developer.blender.org/D9800
Reviewed by: Brecht Van Lommel
Was failing for weightpaint and vertexpaint.
Selection flags were actually changed, but the update in the viewport
wasnt immediate, leading to confusion when the update happened later
(e.g. when using the weight gradient tool as done in the report).
We need to tag ID_RECALC_SELECT and send ND_SELECT notifier here. This
could be done explicitly, but there is also existing functionality
available that does this.
Note: the way updates happen for paintfaces vs. paintverts looks a bit
inconsistent (so this could be part of a later cleanup commit)
Maniphest Tasks: T82881
Differential Revision: https://developer.blender.org/D9631
Adds support for building multiple BVH types in order to support using both CPU and OptiX
devices for rendering simultaneously. Primitive packing for Embree and OptiX is now
standalone, so it only needs to be run once and can be shared between the two. Additionally,
BVH building was made a device call, so that each device backend can decide how to
perform the building. The multi-device for instance creates a special multi-BVH that holds
references to several sub-BVHs, one for each sub-device.
Reviewed By: brecht, kevindietrich
Differential Revision: https://developer.blender.org/D9718
This node can be used to mix two attributes in various ways.
The blend modes are the same as in the MixRGB shader node.
Differential Revision: https://developer.blender.org/D9737
Ref T82374.
When compiling on Windows, the following warnings occur:
```[3468/4560] Building C object source\blender\draw\CMakeFiles\bf_draw.dir\engines\eevee\eevee_cryptomatte.c.obj
C:\blender-git\blender\source\blender\draw\engines\eevee\eevee_cryptomatte.c(306): warning C4047: 'function': 'bool' differs in levels of indirection from 'void *'
C:\blender-git\blender\source\blender\draw\engines\eevee\eevee_cryptomatte.c(306): warning C4024: 'eevee_cryptomatte_shading_group_create': different types for formal and actual parameter 5```
As @Severin pointed out [here](https://developer.blender.org/rB76a0b322e4d3244e59a154c8255b84a4fbc33117#288960), this is due to the last two arguments being flipped. This diff corrects the order.
Reviewed By: Severin, fclem
Differential Revision: https://developer.blender.org/D9809
duplicated particle system
When particle settings are duplicated along with the particle system,
this means a change in relations, was missing
'DEG_relations_tag_update'.
Maniphest Tasks: T83640
Differential Revision: https://developer.blender.org/D9823
The parameter type was incorrectly changed in rB6be56c13e96048cbc494ba5473a8deaf2cf5a6f8 by me.
This can be any id and does not have to be a node tree.
I thought I had reasoned that the add_patch would only happen
when the patch was not already in a cell, but I missed reasoning
about merged cells. So switched to a set 'add' instead of 'add_new'.
2020-12-10 09:15:16 -05:00
1135 changed files with 37025 additions and 14144 deletions
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
