This commit fixes T96229.
The maximum possible radius was being used for 3 point
splines, regardless of the current radius.
Reviewed By: HooglyBoogly
Maniphest Tasks: T96229
Differential Revision: https://developer.blender.org/D14311
When OneDrive files are offline, show preexisting thumbnails.
See D13930 for details.
Differential Revision: https://developer.blender.org/D13930
Reviewed by Julian Eisel
Add the ability to move `CurvesGeometry` without copying its attributes
and data. The benefit is more intuitive management of the data-block
copying, and less overhead for copying in some cases. The "moved-from"
source is left in an empty but valid state. A test file is added to test
the move constructor.
Before this patch, users had to switch render engines just to change how the
hair should be displayed in solid and material preview viewport shading modes.
Differential Revision: https://developer.blender.org/D14290
By not resetting the line width, other scopes were using the
wrong line thickness.
Contributed by RedMser.
Differential Revision: https://developer.blender.org/D12030
My own error when committing 0602852860. It appears that
the "Endpoint" knots modes should be handled together, otherwise
out of bounds array access is possible.
Win32: Replace SHGetFileInfoW as means to get friendly display names
for volumes because it causes long pauses for disconnected remote
drives.
See D14305 for more details.
Differential Revision: https://developer.blender.org/D14305
Reviewed by Brecht Van Lommel
There was an error with the attribute API implementation for vertex
groups. If the vertex group layer referenced an original mesh, it wasn't
properly duplicated for writing.
When rendering using the command line the curvature wasn't rendered. The reason
was that the ui_scale wasn't initialized and therefore the same pixels where
sampled to detect the curvature. This is fixed by setting the ui_scale to 1 for any
image render.
Change early drag evaluation added in
1f1dcf41d5 to only apply to drag events
from mouse buttons. Otherwise pressing two keyboard keys at one would
create a drag event for the first pressed key. While this didn't cause
any bugs as far as I know, this behavior makes most sense for drags
that come from cursor input.
Only set press events in the windows eventstate, not the current event
since it's not useful for these to be set current events press values.
This makes it possible for a press event to access values for the
previous press.
Activating a gizmo used the windows eventstate which may have values
newer than the event used to activate the gizmo.
This meant transforms check for the key that activated transform
could be incorrect.
Support passing an event when calling operators to avoid this problem.
It was possible that a render thread will be freeing cache while the
interface is iterating over cache items to build cache line.
Found while looking into T94738. It might be a fix, but I am unable
to reproduce the original issue, so can not know for sure whether
there is something else going or or not.
This function was copied from txt_sel_to_buf, including unnecessary
complexity to support selection as well as checks for the cursor
which don't make sense when copying the whole buffer.
Use a simple loop to copy all text into the destination buffer.
This patch enables all 8 combinations of Nurbs modes: Cyclic,
Bezier and Endpoint. Also removes restriction on Bezier Nurbs order.
The most significant changes are mode combinations bringing new
meaning. In D13891 is a scheme showing NURBS with same control
points in a modes, and also further description of each possible case.
Differential Revision: https://developer.blender.org/D13891
Regression in 265d97556a.
Where iterating directly on a property group failed, e.g.:
`iter(group)`, tests missed this since only `group.keys()`
was checked.
`3DView`'s `use_snap` option has little or nothing to do with using
snapping in `UV`, `Nodes` or `Sequencer`.
So there are no real advantages to keeping these options in sync.
Therefore, individualize the option to use snap for each "spacetype".
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D13310
The result handle attributes for non-bezier types are zeroed.
By mistake though, the entire array was zeroed, not just the
area corresponding to that curves source.
When viewing meta strip, it had orange color. This was caused by
overflow because of hard-coded offset. Theme got darker, and background
was also set again further in code, but redundant drawing was removed in
f4492629ea.
Realizing and copying attributes of meshes, curves, and points are very
similar processes, but currently the logic is duplicated three times in
the realize instances code. This commit combines the implementation
for copying generic attributes and creating the result id attribute.
The functions for threaded copying and filling should ideally be in
some file elsewhere, since they're not just useful here. But it's not
clear where they would go yet.
Differential Revision: https://developer.blender.org/D14294
Caused by an integer overflow in the tiling utilities of OptiX SDK.
Seems for now it's easier to copy and modify code to our sources so
that we don't need to bump SDK version requirement (which might lead
to an increased driver requirement as well).
There are still some fixes needed from a newer driver to have such
denoising to work properly: Windows requires 511.79, Linux 510.54.
Thanks Patrick for investigation!
Differential Revision: https://developer.blender.org/D14300
Mark the chain length of regular and spline IK constraints
non-animatable. Changing the IK chain length requires a rebuild of
depsgraph relations. This makes it unsuitable for animation. It's better
to simply avoid having this property animatable than to allow animation
but produce unstable results.
Ref: T96203
When dragging with a large threshold (using a tablet for example),
it's possible to press another key before the drag threshold is reached.
So tweaking then pressing X would show the delete popup instead of
transforming along the X-axis.
Now key presses while dragging cause the drag event to be evaluated
before the key press.
Note that to properly base the mouse-move event on the previous
state the last handled event is now stored in the window.
Without this the inserted mouse-move event may contain invalid values
from the next event (it's modifier state or other `prev_*` values).
Requested by @JulienKaspar.
Regression in 08d8eee006 caused
emulate-middle mouse to work once, clearing the modifier key.
Now the modifier key from emulated mouse events is never stored
in the windows event-state.
The realize instances code used "assign", but the attribute buffers on
the result aren't necessarily initialized. This doesn't make a difference
for trivial types like `int`, but it would with more complex types.
This commit replaces the temporary conversion to `CurveEval` with
use of the new curves data-block. The end result is that the
process looks more like the other components-- somewhere in between
meshes and point clouds in terms of complexity.
The final result is that the logic between meshes and curves is
very similar. There are a few different strategies to reduce
duplication here, so I'll investigate that separately.
There is some special behavior for the radius and handle position
attributes. I used the attribute API to store spans of these
attributes temporarily. Using access methods on `CurvesGeometry`
would be reasonable to, storing spans separately feels a bit more
predictable for now though.
There should be significant performance improvements in some cases,
I haven't tested that specifically though.
Differential Revision: https://developer.blender.org/D14247
Passing a `TreeElement *` instead of its `TreeStoreElement *` to
`TSELEM_OPEN()` would seem to work but cause a bug. Add a type check
that will cause a compiler error if it fails.
I don't see a reason to use 2x the element height for the "in-view"
checks. That seems incorrect (although shouldn't cause issues). So
remove that, I don't expect behavior changes.
For whatever reason the "in-view" check was using 2x the element height.
From what I can see this isn't needed, so I'll remove it in a follow-up
commit.
Restrict a lot deletion/moving around of liboverride objects and
collections in the Outliner.
While some of those operations may be valid in some specific cases, in
the vast majority of cases they would just end up breaking override
hierarchies/relationships.
Part of T95708/T95707.
Blender crashes when a multi-user grease pencil object has vertex
groups and is modified by modifiers, layer transform or parenting.
The fix makes sure that we copy the vertex group names list.
Reviewed By: antoniov
Maniphest Tasks: T96233
Differential Revision: https://developer.blender.org/D14275
Fix T95462: Partly transparent objects appear to glow in the dark
The issue was caused by incorrect check for exceeded number
of transparent bounces: the same maximum distance was used
for picking up N closest intersections and counting overall
intersections count.
Now made it so intersection count is using ray distance which
matches the way how Embree and OptiX implementation works.
Benchmark result:
{F12907888}
There is no big time difference in the pabellon scene. The
Victor scene timing doesn't seem to be very reliable as the
variance in time across different benchmark runs is quite
high.
Differential Revision: https://developer.blender.org/D14280
At the time of naming these members only some event types generated
click events so it made some sense to differentiate a click.
Now all buttons support click & drag it's more logical to use the
prefix "prev_press_" as any press event will set these values.
Also update doc-strings.
Operator area_dupli_invoke should not create modal windows.
See D14253 for details.
Differential Revision: https://developer.blender.org/D14253
Reviewed by Brecht Van Lommel
This commit fixes an issue, where for instance, when merging vertices
with the "Merge by Distance" geometry node, the resulting vertices had
their boolean attributes set unpredictably.
Boolean attributes are implemented as custom data, and when welding
vertices, the custom data for the resulting vertices comes from
interpolating the custom data of the source vertices.
This commit implements the missing interpolation function for the
boolean custom data type. This interpolation function is implemented in
terms of the logical or operation, that is to say, if any of the source
vertices (with a weight greater than zero) have the boolean set, the
boolean will also be set on the resulting vertex.
This logic matches 95981c9876.
In geometry nodes, attribute interpolation generally does not use the
CustomData API for performance reasons, but other areas of Blender
still do.
Differential Revision: https://developer.blender.org/D14172
This avoids transform jumping which is a problem when tweaking values a
small amount. A fix for T40549 was made box-select used the location
when the key was pressed.
While it's important for box-select or any operator where it's expected
the drag-start location is used, this is only needed in some cases.
Since the event stores the click location and the current location,
no longer overwrite the events real location. Operators that depend on
using the drag-start can use this location if they need.
In some cases the region relative cursor location (Event.mval) now needs
to be calculated based on the click location.
- Added `WM_event_drag_start_mval` for convenient access to the region
relative drag-start location (for drag events).
- Added `WM_event_drag_start_xy` for window relative coordinates.
- Added Python property Event.mouse_prev_click_x/y
Resolves T93599.
Reviewed By: Severin
Ref D14213
Prevents a few unneeded calls to `std::sin`, with an observed
performance improvement of about 1 percent.
Differential Revision: https://developer.blender.org/D14279
When the geometry of the sculpt mesh was replaced when restoring from
a full undo step, the runtime data was not cleared (including any
normals, triangulation data, or any other cached derived data).
In the report, only the invalid normals were observed.
The fix is to simply clear these caches. Later they will be reallocated
and recalculated if necessary. Since the whole mesh replaced here
anyway, this should be a safe fix.
Differential Revision: https://developer.blender.org/D14282
The new mode only builds the new strokes in each frame.
The code is assuming somebody uses "additive" drawing, so that each frame is different only in its NEW strokes. Already existing strokes are skipped.
I used a simple solution: Count the number of strokes in the previous frame and ignore this many strokes in the current frame.
Differential Revision: https://developer.blender.org/D14252
Tangents are computed from UVs on the CPU side when using GPU subdivision
and require that the normals are available there as well (at least for smooth
shading, flat normals can be computed on the fly). This simply adds the missing
normals update call for the `MeshRenderData` setup for the subdivision case.
Differential Revision: https://developer.blender.org/D14278
Some drivers for legacy platforms seem to have issues with compute
shaders, as revealed by T94936. This disables compute shader for the
known drivers where this issue is present. It is not clear if the issue
is Windows only or not, so this disable them for all operating systems.
See T94936 for a list of configurations where the issue is reproducible
or not.
Differential Revision: https://developer.blender.org/D14264
Sound properties like volume, pitch and muting are handled in
`BKE_sound_add_scene_sound()`. This is unnecessary, because in
properties are then set to real values in `SEQ_edit_update_muting()` and
`seq_update_seq_cb()`.
Alternatively, it may be better to remove all other updates leave them
in `BKE_sound_add_scene_sound()`. But I want to add muting per channel,
whhich is easier and probably cleaner to do with function
`SEQ_edit_update_muting()`.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D14269
Avoid re-creating & freeing the depsgraph for every driver evaluation.
Now the depsgraph is kept in the name-space (matching self),
only re-created when the value changes.
In a contrived test-case with many drivers this gave ~15% overall
speedup for animation playback.
Code cleaning up no-more-needed override data during diffing process
would systematically remove override data from linked IDs.
While this is not a critical issue in theory, it has bad consequences at
the very least on user UI/UX, and potentially can cause bugs in some
corner-cases scenarii.
The exact behavior of the brushes is still being iterated on, but it
helps having a base implementation that we can work upon.
All of that is still hidden behind an experimental feature flag anyway.
The brushes will get a name in the ui soon.
Differential Revision: https://developer.blender.org/D14241
Issue only happens in release builds on windows. That said it was an
actual error in the code. This class is compiled inline in release
builds. When updating multiple textures it would reuse the same memory
to collect the changes. When the previous loaded tilenumber was exactly the
same but from a different image the tile buffer wasn't loaded.
Reviewed By: sergey
Maniphest Tasks: T96213
Differential Revision: https://developer.blender.org/D14274
This part has to be refactored soon anyway, because more types
curves have to be drawn for the new Curves object.
For now, 3 is a better default than 2, because that matches the
actual resolution of the curve currently.
This makes the brushes more smooth, because the brush has an
effect after every mouse move, instead of only every x pixels.
For this to work well, the brushes have to look at the stroke
segments instead of at the mouse positions separately.
A more fine grained check might be added in the future.
Issue was introduced after the python 3.10 switch
Explicit conversion to int will fix the issue.
Same issue is likely to happen with `MovieTrackingSettings.default_search_size`
So I did the same change over there.
Differential Revision: https://developer.blender.org/D14273
Support this for completeness, as it's simpler to support click-drag
for all events types that support press/release instead of having to
document which kinds buttons support click-drag.
In practice this didn't cause a bug since assigning hot-keys was also
checking for "press" events (which NDOF_MOTION doesn't generate).
Add ISNDOF_BUTTON macro which is now used by ISHOTKEY to avoid
problems in the future.
The main improvement is a code simplification, because attributes don't
have to be transferred separately for each curve, and all attributes can
be handled generically. Performance improves significantly when the
output contains many curves. Basic testing with a 2 million curve output
shows an approximate 10x performance improvement.
This fixes the second part of T93573 that 8506f3d9fe didn't
properly address. Specifically, outlines of instances still had the
selected color in edit mode in wireframe view. This change is the
same as that commit, just in a different place.
Differential Revision: https://developer.blender.org/D14229
Previously the labels and values in number fields and value sliders
used different padding for the text. This looks weird when they are
placed underneath each other in a column and, as noted by a comment
in the code of `widget_numslider`, they are actually meant to be
aligned.
This patch fixes that by using the same padding that is used for the
number field for the value slider, as well. This also has the benefit,
that the labels of the value sliders don't shift anymore when adjusting
the corner roundness.
Differential Revision: https://developer.blender.org/D14091
This quick fix will populate the runtime orig pointers to avoid
crashes when a grease pencil object uses layer transforms, parenting
or modifiers.
This will have to be revisited and fixed with a better solution.
Enables image user nodes to display the file alpha mode, similar to the
colorspace setting.
Also removes image_has_alpha in favor of using BKE_image_has_alpha, because it
did not check if the image actually had an alpha channel, just if the file format
was capable of supporting an alpha channel.
Differential Revision: https://developer.blender.org/D14153
An alpha component can be specified for an object's color. This adds an alpha
socket to the object info shader node allowing for the alpha component of the
object's color to be accessed in the shader editor.
Differential Revision: https://developer.blender.org/D14141
Fix crash when creating a pose asset for which the file list entry in
the asset browser is scrolled off-screen. Because of the
off-screen-ness, it wasn't loaded into memory, which eventually caused
an unexpected NULL pointer.
The solution was to use a different function (`filelist_file_find_id`)
that can reliably find the file list entry, after which the cache entry
can be created.
Reviewed by: Severin
Differential Revision: https://developer.blender.org/D14265
When drawing the driver editor, only skip drawing the "scrubbing area"
and not the Y-axis values or the scroll bars.
The issue was introduced in rBb3431a88465db2433b46e1f6426c801125d0047d
to avoid drawing the playhead in the Driver Editor but also prevented
the text on the y axis from being drawn.
Reviewed by: Severin, sybren
Maniphest Tasks: T95531
Differential Revision: https://developer.blender.org/D14022
Fix crash when creating a pose asset for which the file list entry in
the asset browser is scrolled off-screen. Because of the
off-screen-ness, it wasn't loaded into memory, which eventually caused
an unexpected NULL pointer.
The solution was to use a different function (`filelist_file_find_id`)
that can reliably find the file list entry, after which the cache entry
can be created.
Reviewed by: Severin
Differential Revision: https://developer.blender.org/D14265
Fix an assert by commenting out the assert.
In normal situations all keyframes are sorted. However, while keys are
transformed, they may change order and then this assertion no longer
holds. The effect is that the drawing isn't perfect during the
transform; the "constant value" bars aren't updated until the
transformation is confirmed. Apart from that, the code runs fine, so it
seems like a workable workaround.
When drawing the driver editor, only skip drawing the "scrubbing area"
and not the Y-axis values or the scroll bars.
The issue was introduced in rBb3431a88465db2433b46e1f6426c801125d0047d
to avoid drawing the playhead in the Driver Editor but also prevented
the text on the y axis from being drawn.
Reviewed by: Severin, sybren
Maniphest Tasks: T95531
Differential Revision: https://developer.blender.org/D14022
Annotation tool is used as a general mark tool for many add-ons. To be able to detect when an annotation is done is very handy to integrate the annotation tool in add-ons and other studio workflows.
The new callback names are: `annotation_pre` and `annotation_post`
Both callbacks are exposed via the Python module `bpy.app.handlers`
Example use:
```
import bpy
def annotation_starts(gpd):
print("Annotation starts")
def annotation_done(gpd):
print("Annotation done")
bpy.app.handlers.annotation_pre.clear()
bpy.app.handlers.annotation_pre.append(annotation_starts)
bpy.app.handlers.annotation_post.clear()
bpy.app.handlers.annotation_post.append(annotation_done)
```
Note: The handlers are called for any annotation tool, including eraser.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D14221
Using press to activate the Tweak tool doesn't work well when used a
fallback tool as the drag event is often used by the current tool -
making it impossible not to select when dragging (unless the fallback
tool is disabled entirely).
Resolve this by using CLICK events when the Tweak tool is used as a
fallback.
Even though this avoids the crash, check for null-pointer de-reference
since changes to the key-map shouldn't cause operators to crash.
Note that the ability for operators to access a gizmo before it's fully
initialized is a more general problem that should be addressed, but out
of scope for a bug-fix.
Reviewed By: zeddb, JulienKaspar, Severin
Maniphest Tasks: T95591
Ref D14231
When a grease pencil data-block has multiple users and is subject
to modifiers, layer transforms or parenting, performance
(especially playback) is greatly affected.
This was caused by the grease pencil eval process which does per
instance full-copies of the original datablock in case those
kinds of transformations need to be applied.
This commit changes the behavior of the eval process to do shallow
copies (layers with empty frames) of the datablock instead
and duplicates only the visible strokes.
When we need to have a unique eval data
per instance, only copy the strokes of visible
frames to this copy.
Performance:
On a test file with 1350 frames 33k strokes and 480k points
in a single grease pencil object that was instanced 13 times:
- master: 2.8 - 3.3 fps
- patch: 42 - 52 fps
Co-authored by: @filedescriptor
This patch was contributed by The SPA Studios.
Reviewed By: #grease_pencil, pepeland
Differential Revision: https://developer.blender.org/D14238
Regression in d961adb866,
it's important that for the Mesh used for undo storage matches
the shape-key instead of using the coordinates of the Basis key.
Prior to bfdbc78466 a different method of
restoring the basis shape-key coordinates was used (restoring from the
input `Mesh.mvert` array). When undo wrote the edit-mesh into the mesh
this was always NULL so the basis shape keys coordinates were never
used.
Now a parameter has been added so undo can use the active shape for the
meshes vertex coordinates.
Reviewed By: sergey
Maniphest Tasks: T96205
Ref D14258
Undo would invalidate image owned GPU textures only. Textures
that are owned by the editor were not refreshed. This patch would
invalidate all the GPU textures by marking the whole image dirty.
This can be improved later as we could add partial updates of GPU
textures.
Reviewed By: mont29
Maniphest Tasks: T96163
Differential Revision: https://developer.blender.org/D14259
Caused by oversight in 2bcf93bbbe. Operator returns `OPERATOR_CANCELLED`
when it should return `OPERATOR_FINISHED`.
Reviewed By: mano-wii, campbellbarton
Differential Revision: https://developer.blender.org/D14243
The "curve_type" was transferred to instances because it isn't a
built-in curve attribute. Then it was interpolated as a point
domain attribute from the instance domain in the realize
instances node.
The fix was just missing from 9ec12c26f1.
`curve_type` needs to be marked as a built-in attribute.
Support drag/drop of materials to Properties Material Slots.
See D13549 for more details.
Differential Revision: https://developer.blender.org/D13549
Reviewed by Julian Eisel
The node should be faster than in 3.1, for a few reasons:
- It doesn't need to calculate and allocate the curve offsets.
- It doesn't need to de-reference a pointer for each curve.
- The inputs are accessed from the virual arrays fewer times.
On top of that, I added two other performance improvements:
- The node is multi-threaded when there are many curves.
- There are generated special cases for single value and span inputs.
**Performance**
With a set position node affecting 1 million splines with a selection
based on this node, on an Intel i5 8250U (times are approximate):
| Before | After | Speedup |
| 760 ms | 60 ms | 13x |
Differential Revision: https://developer.blender.org/D14233
When removing a modifier, changing the layer transform or updating
the parent of a grease pencil object that has a multi-user datablock
and animation data, the eval data is not updated properly (after a
frame change). This can also cause memory leaks.
The fix makes sure that we free and reset any runtime copy
(`ob->runtime.gpd_eval`) in `BKE_gpencil_prepare_eval_data`.
Note: As far as we can tell, `ob->runtime.gpd_orig` is unused and could
be removed. The assignment in `BKE_gpencil_prepare_eval_data`
seemed to be unnecessary.
Co-authored-by: @yann-lty
Reviewed By: antoniov
Maniphest Tasks: T96145
Differential Revision: https://developer.blender.org/D14236
Previously you'd have to be careful to drag the image itself. Dragging
anywhere else on the tile (e.g. between the preview and the text, or the
text itself) would trigger border select. This often conflicts with user
expectations and causes frustration when trying to work quick, I've seen
many people complain about this.
Note that the "hitbox" for dragging is a bit smaller than the tile, to
not make border select by dragging from in-between the tiles too hard.
Differential Revision: https://developer.blender.org/D14228
Just use the image-buffer size and the already provided scale to
determine the size, not the button size (which would always have to
match the scaled image-buffer size or it would give unexpected results).
This patch adds edge selection support for UV editing (refer T76545).
Developed as a part of GSoC 2021 project - UV Editor Improvements.
Previously, selections in the UV editor always flushed down to vertices
and this caused multiple issues such as T76343, T78757 and T26676.
This patch fixes that by adding edge selection support for all UV
operators and adding support for flushing selections between vertices
and edges. Updating UV select modes is now done using a separate
operator, which also handles select mode flushing and undo for UV
select modes. Drawing edges (in UV edge mode) is also updated to match
the edit-mesh display in the 3D viewport.
Notes on technical changes made with this patch:
* MLOOPUV_EDGESEL flag is restored (was removed in rB9fa29fe7652a).
* Support for flushing selection between vertices and edges.
* Restored the BMLoopUV.select_edge boolean in the Python API.
* New operator to update UV select modes and flushing.
* UV select mode is now part of editmesh undo.
TODOs added with this patch:
* Edge support for shortest path operator (currently uses vertex path logic).
* Change default theme color instead of reducing contrast with edge-select.
* Proper UV element selections for Reveal Hidden operator.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12028
Just showing the library override icon for every item doesn't add much
information, it's just redundant. Displaying the data-block type icon on
the other hand can be useful.
Differential Revision: https://developer.blender.org/D14208
This patch adds a button in the scene to add a new one, but this does not change to the new created scene because this breaks the storyboarding workflow.
This is a common request for Storyboarding artists.
Reviewed By: mendio, brecht, ISS
Differential Revision: https://developer.blender.org/D14148
When exiting edit-mode set the vertex coordinates to the basis-shape when editing non-basis keys.
Regression in bfdbc78466.
Reviewed By: sergey
Ref D14234
This is needed since 4d0f846b93
however change in the operator instead of the event handler is correct,
as accepting a press event should suppress drag events unless
the pass-through flag is set.
This is how select & tweak already works.
It's not useful to wrap vertical motion when dragging markers.
It was too easy to accidentally wrap the cursor to the top of a region,
as markers need to be dragged from the bottom edge of the region.
The logic to cycle selected markers wasn't cycling back to the beginning
of the list.
The marker after the selected marker at the cursor frame was also used
to check if a selection existed, causing dragging to transform all
selected markers to de-select all when when dragging the last marker.
The node unnecessarily converted to the old data structure to check if
there were any poly splines. Instead, that warning is just removed,
because the node now still sets resolution values in that case, they
just aren't used (before the values weren't set at all). Either way, it
wasn't clear that looping though all of the curve types was worth
the performance cost here.
In `ffmpeg_read_video_frame` fix assignment used as truth value.
In `ffmpeg_seek_recover_stream_position` loop while return value is
greater or equal to 0.
Passing around coordinates for drawing can be quite confusing, it's
often not clear what they represent and where they are currently.
Instead pass around the tile rectangle for drawing and let all code draw
based on that, it's way more clear that way.
Changes shouldn't be user visible.
Correct misspellings in code comments of "vertex" and "vertices".
See D13932 for more details.
Differential Revision: https://developer.blender.org/D13932
Reviewed by Harley Acheson
This adds a prototype for the first brush that can add new curves by
painting on a surface. Note that this can only be used when the curves
object has a surface object set in the properties panel.
The brush can take minimum distance into account. This allows
distributing curves with a somewhat consistent density.
Differential Revision: https://developer.blender.org/D14207
This commit removes the outline from instances generated from an object
when in edit mode. This takes the change in aa13c4b386 a bit further,
with the idea that instance outlines are more like regular outlines.
Because evaluated object data that doesn't match the original object
type is treated as an instance internally, this fixes the way evaluated
meshes for curves objects have an outline, for example.
See the differential revision for a visual comparison.
Differential Revision: https://developer.blender.org/D14226
This patch enables enables the outliner to use the correct icon for each
of the curve subtypes (Curve/Surface/Font).
Differential Revision: https://developer.blender.org/D14093
Reviewed by: Julian Eisel
Since removal of tweak events 4986f71848,
box-select is activating while dragging files.
As far as I can tell this used to work because of differences
int the order tweak / click-drag events are handled.
Apply a workaround since dragging files doesn't prevent other parts
of the UI from activated (it's possible to open menus for e.g),
this is something we will likely want to limit which would resolve
this bug too.
There are two issues revealed in the bug report:
- the GPU subdivision does not support meshes with only loose geometry
- the loose geometry is not subdivided
For the first case, checks are added to ensure we still fill the
buffers with loose geometry even if no polygons are present.
For the second case, this adds
`BKE_subdiv_mesh_interpolate_position_on_edge` which encapsulates the
loose vertex interpolation mechanism previously found in
`subdiv_mesh_vertex_of_loose_edge`.
The subdivided loose geometry is stored in a new specific data structure
`DRWSubdivLooseGeom` so as to not pollute `MeshExtractLooseGeom`. These
structures store the corresponding coarse element data, which will be
used for filling GPU buffers appropriately.
Differential Revision: https://developer.blender.org/D14171
Partially revert aa71414dfc
This attempted have the click-drag event compatible with old tweak
events, but needs to be re-thought since it caused events to be handled
in unexpected situations.
This utility is useful when using C types that own some resource in
a C++ file. It mainly helps in functions that have multiple return
statements, but also simplifies code by moving construction and
destruction closer together.
Differential Revision: https://developer.blender.org/D14215
This fix contains two parts. There was one critical mistake where
order of two indices was wrong when removing constraint planes from
the array. The other changes are improvements to the used thresholds
to keep everything numerically stable.
Differential Revision: http://developer.blender.org/D14183
This branch was previously run when the action had been handled,
since action checks were removed it was running. This assignment
does nothing but shouldn't be kept.
previously_visible_components_mask was not preserved for Image ID nodes, which
meant it was always detected as newly visible and tagged to be updated, which
in turn caused the geometry nodes using it to be always updated also.
Reviewed By: sergey, JacquesLucke
Maniphest Tasks: T94609
Differential Revision: https://developer.blender.org/D14217
Supporting two kinds of dragging is redundant, remove tweak events as
they only supported 3 mouse buttons and added complexity from using the
'value' to store directions.
Support only click-drag events (KM_CLICK_DRAG) which can be used with
any keyboard or mouse button.
Details:
- A "direction" member has been added to keymap items and events which
can be used when the event value is set to KM_CLICK_DRAG.
- Keymap items are version patched.
- Loading older key-maps are also updated.
- Currently the key-maps stored in ./release/scripts/presets/keyconfig/
still reference tweak events & need updating. For now they are updated
on load.
Note that in general this wont impact add-ons as modal operators don't
receive tweak events.
Reviewed By: brecht
Ref D14214
Clicking and dragging markers accumulates flags from multiple operators
in a way that can't be interpreted when combine.
Follow tweak behavior for cancelling click-drag events.
Replacing tweak key-map items with click-drag caused selection
in the graph/sequencer/node editors to ignore drag events
(all uses of WM_generic_select_modal).
Operators that return OPERATOR_PASS_THROUGH | OPERATOR_FINISHED
result in the event loop considering the event as being handled.
This stopped WM_CLICK_DRAG events from being generated which is not the
case for tweak events.
As click-drag is intended to be compatible with tweak events,
accept drag events when WM_HANDLER_BREAK isn't set or when
wm_action_not_handled returns true.
A simple case of missing the tangent VBO. The tangents are computed from
the coarse mesh, and interpolated on the GPU for the final mesh. Code for
initializing the tangents, and the vertex format for the VBO was
factored out of the coarse extraction routine, to be shared with the
subdivision routine.
Last step of proxy building caused crash due to thread race contition
when acessing ed->seqbase.
Looking at code, it seems that calling IMB_close_anim_proxies on
original strips is unnecessary so this code was removed to resolve this
issue.
Locking seqbase data may be possible, but it's not very practical as
many functions access this data on demand which can easily cause
program to freeze.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D14210
Mousemove events are sent to windows.
In Windows OS, almost all mousemove events are sent to the window whose
mouse cursor is over.
On MacOS, the window with mousemove events is always the active window.
It doesn't matter if the mouse cursor is inside or outside the window.
So, in order for non-active windows to also have events,
`WM_window_find_under_cursor` is called to find those windows and send
the same events.
The problem is that to find the window, `WM_window_find_under_cursor`
only has the mouse coordinates available, it doesn't differentiate
which monitor these coordinates came from.
So the mouse on one monitor may incorrectly send events to a window on
another monitor.
The solution used is to use a native API on Mac to detect the window
under the cursor.
For Windows and Linux nothing has changed.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D14197
The subdivision modifier for Grease Pencil handles closed strokes
correctly now and does converge to the same shape as the mesh
subdivision surface.
Differential Revision: http://developer.blender.org/D14218
Create `Curves` directly, instead of using the conversion from
`CurveEval`. This means that the `tilt` and `radius` attributes
don't need to be allocated. The old behavior is kept by using the
right defaults in the conversion to `CurveEval` later on.
The Bezier segment primitive isn't ported yet, because functions
to provide easy access to built-in attributes used for Bezier curves
haven't been added yet.
Differential Revision: https://developer.blender.org/D14212
Currently, any time a Curves data-block is created, the `curves_random`
function runs, filling it with 500 random curves, also adding a radius
attribute. This is just left over from the prototype in the initial
commit that added the type.
This commit moves the code that creates the random data to the curve
editors module, like the other primitives are organized.
Differential Revision: https://developer.blender.org/D14211
This patch hides the MetalRT checkbox for AMD GPUs, pending fixes for MetalRT argument encoding on AMD.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D14175
The issue was uncovered by the 0f89bcdbeb, but the root cause goes
into a much earlier design violation happened in the code: the modifier
evaluation function is modifying input mesh, which is not something
what is ever expected.
Bring code closer to the older state where such modification is only
done for the object in edit mode.
---
From own tests works seems to work fine, but extra eyes and testing
is needed.
Differential Revision: https://developer.blender.org/D14191
db4313610c added support for modifier
keys to be released while dragging.
The key release events set wmEvent.prev_type which is used select the
drag threshold, causing the wrong threshold to be used.
Add wmEvent.prev_click_type which is only set when the drag begins.
The image engine is depth aware when using tile drawing the depth is
only updated for the central image what lead to showing the background
on top of other areas.
Also makes sure that switching the tile drawing would lead to an update
of the texture slots.
When dimension of images aren't a multifold of 256 parts of the gpu
textures are not updated. This patch will calculate the correct part of
the image that needs to be reuploaded.
Internally the update tiles are 256x256. Due to some miscalculations
tiles were not generated correctly if the dimension of the image wasn't
a multifold of 256.
Previously we used to cache a float image representation of the image in
rect_float. This adds some incorrect behavior as many areas only expect
one of these buffers to be used.
This patch stores float buffers inside the image engine. This is done per
instance. In the future we should consider making a global cache.
Use a flag for events to avoid adding struct members every time a new
kind of tag is needed - so events remain small.
This also simplifies copying settings as flags can be copied at once
with a mask.
- Rename ED_view3d_win_to_delta `mval` argument to `xy_delta` as it
as it was misleading since this is an screen-space offset not a region
relative cursor position (typical use of the name `mval`).
Also rename the variable passed to this function which also used the
term `mval` in many places.
- Re-order the output argument of ED_view3d_win_to_delta last.
use an r_ prefix for return arguments.
- Document how the `zfac` argument is intended to be used.
- Split ED_view3d_calc_zfac into two functions as the `r_flip` argument
was only used in some special cases.
Small fixes to the drawing of multi input sockets:
- Make the outline thickness consistent with normal node sockets,
independent from the screen DPI.
- Only highlight multi input sockets when they are actually selected.
- Skip selected multi inputs when drawing normal selected sockets.
Differential Revision: https://developer.blender.org/D14192
Currently the code expects the radius attribuet to always exist on the
input Curves. This won't be true in the future though, so the correct
default value of one should be used when creating the data on CurveEval,
where the data is not optional.
This commit improves the drawing of selected node links:
- Highlight the entire link to make it easier to spot where the link
is going/coming from.
- Always draw selected links on top, so they are always clearly
visible.
- Don't fade selected node links when the sockets they are connected
to are out out view.
- Dragged node links still get a partial highlight when they are only
attached to one socket.
Differential Revision: https://developer.blender.org/D11930
Add a std::move in some places to prevent arrays from being copied.
These cases were potentially optimized by the compiler, but this makes
it more explicit.
Differential Revision: https://developer.blender.org/D14129
New code from the vertex normal refactor cfa53e0fbe combined with older code
from 592759e3d6 that disabled instancing for custom normals and autosmooth
meant that instancing was always disabled.
However we do not need to disable instancing for custom normals and autosmooth
at all, this can be shared between instances just fine.
The constraint operators for delete, apply, copy and copy to selected
were missing null checks and could crash blender when called wrongly
from the python api.
Differential Revision: http://developer.blender.org/D14195
This commit changes `CurveComponent` to store the new curve
type by adding conversions to and from `CurveEval` in most nodes.
This will temporarily make performance of curves in geometry nodes
much worse, but as functionality is implemented for the new type
and it is used in more places, performance will become better than
before.
We still use `CurveEval` for drawing curves, because the new `Curves`
data-block has no evaluated points yet. So the `Curve` ID is still
generated for rendering in the same way as before. It's also still
needed for drawing curve object edit mode overlays.
The old curve component isn't removed yet, because it is still used
to implement the conversions to and from `CurveEval`.
A few more attributes are added to make this possible:
- `nurbs_weight`: The weight for each control point on NURBS curves.
- `nurbs_order`: The order of the NURBS curve
- `knots_mode`: Necessary for conversion, not defined yet.
- `handle_type_{left/right}`: An 8 bit integer attribute.
Differential Revision: https://developer.blender.org/D14145
The UI context was only set for the operator polls, but not for the
drop-box polls. Initially I thought this wouldn't be needed since the
drop-boxes should leave up context polls to the operator, but in
practice that may not be what API users expect. Plus the tooltip for the
drop-boxes will likely have to access context anyway, so they should be
able to check it beforehand.
Motion paths can now be initialised to more sensible frame ranges,
rather than simply 1-250:
- Scene Frame Range
- Selected Keyframes
- All Keyframes
The Motion Paths operators are now also added to the Object context menu
and the Dopesheet context menu.
The scene range operator was removed, because the operators now
automatically find the range when baking the motion paths.
The clear operator now appears separated in "Selected Only" and "All",
because it was not clear for the user what the button was doing.
Reviewed By: sybren, looch
Maniphest Tasks: T93047
Differential Revision: https://developer.blender.org/D13687
Caused by 0f89bcdbeb and was not fully addressed by 6f9828289f:
tagging an ID with flag 0 is to be seen as an explicit tag for copy
on write.
Would be nice to either consolidate code paths of flag 0 and explicit
component tag, or get rid of tagging with 0 flag, but that is above of
what we can do for the upcoming release.
When using ancored stroked the diameter of the stroke can be 0 what
leads to a division by zero that on certain platforms wrap to a large
negative number that cannot be looked up. This fix will clamp the size
of the brush to 1.
Now drag & tweak can have modifier keys to be released while dragging.
without this, modifier keys needs to be held which is more noticeable
for tablet input or whenever the drag threshold is set to a large value.
Resolves T89989.
This fixes T93051, T76405 and maybe others.
Characters like '²', '<' are not recognized in Blender's shortcut keys.
And sometimes simple buttons like {key .} and {key /} on the Windows
keyboard, although the symbol is "known", Blender also doesn't
detect for shortcuts.
For Windows, some of the symbols represented by `VK_OEM_[1-8]` values,
depending on the language, are not mapped by Blender.
On Mac there is a fallback reading the "actual character value of the
'remappable' keys". But sometimes the character is not mapped either.
On Windows, the solution now mimics the Mac and tries to read the button's
character as a fallback.
For unmapped characters ('²', '<', '\''), now another value is chosen as a
substitute.
More "substitutes" may be added over time.
Differential Revision: https://developer.blender.org/D14149
Some logic and comments in the vertex normal calculation were
left over from when normals were stored in MVert, before
cfa53e0fbe. Normals are never allocated and freed
locally anymore.
In some cases, the normal edit modifier calculated the normals on one
mesh with the "ensure" functions, then copied the mesh and retrieved
the layers "for write" on the copy. Since 59343ee162, normal
layers are never copied, and normals are allocated with malloc instead
of calloc, so the mutable memory was uninitialized.
Fix by calculating normals on the correct mesh, and also add a warning
to the "for write" functions in the header.
The check to see if newly requested attributes are not already in the
cache was not taking into account the possibility that we do not have
new requested attributes (`num_requests == 0`). In this case, if
`attr_used` already had attributes, but `attr_requested` is empty, we
would consider the cache as dirty, and needlessly rebuild the attribute
VBOs.
These features are complicated to support on GPU and hardly compatible
with subdivision in the first place. In the future, with T68891 and
T68893, subdivision and custom smooth shading will be separate workflows.
For now, and to better prepare for this future (although long term
plan), we should discourage workflows mixing subdivision and custom
smooth normals, and as such, this disables GPU subdivision when
autosmoothing or custom split normals are used.
This also adds a message in the modifier's UI to indicate that GPU
subdivision will be disabled if autosmooth or custom split normals are
used on the mesh.
Differential Revision: https://developer.blender.org/D14194
Reuse the same vertex normals calculation as for the GPU code, by
weighing each vertex normals by the angle of the edges incident to the
vertex on the face.
Additionally, remove limit normals, as the CPU code does not use them
either, and would also cause different shading issues when limit surface
is used.
Fixes T95242: shade smooth artifacts with edge crease and limit surface
Fixes T94919: subdivision, different shading between CPU and GPU
The custom data code checks for `LayerTypeInfo.defaultname` before
adding a second layer with a certain type. This was missed in
e7912dfa19. In practice, this default name
is not actually used.
Added call to ensure that the USD plugins are registered
when opening a USD cache archive. This is to avoid USD
load errors due to missing USD file format plugins when
opening blender files that contain USD transform cache
constraints and mesh sequence cache modifilers.
Fixes T94396
This operation can only be applied on one ID at a time, so only apply it
to the active Outliner item, and not all the selected ones.
Also renamed `Make Library Override` menu entry to `Make Library Override
Single` to emphasis this is not the 'default expected' option for the
user.
This affects essentially the Outliner 'create hierarchy' tool currenlty.
Previously code did not handle properly hierarchy root in case overrides
where created from a non-root ID (e.g. an object inside of a linked
collection), and in case additional partial overrides were added to an
existing partially overrided hierarchy.
Also did some renaming on the go to avoid using 'reference' in override
context for anything else but the reference linked IDs.
Trust user count to actually delete or not the dragged ID when current
dragging is cancelled, since it may be already used by others.
NOTE: This is more a band-aid fix than anything else, cancelling drag
has a lot of other issues here (like never deleting any indirectly
linked/appended data, etc.). It needs a proper rethink in general.
To keep consistency with the new contract option, the dilate now expand the shape beyond the internal closed area.
Note: This was committed only in master (3.2) by error.
This is requested by artist for some animation styles where is necessary to fill the area, but create a gap between fill and stroke.
Also some code cleanup and fix a bug in dilate for top area.
Reviewed By: pepeland, mendio
Differential Revision: https://developer.blender.org/D14082
Note: This was committed only in master (3.2) by error.
Using flags makes checking multiple modifiers at once more convenient
and avoids macros/functions such as IS_EVENT_MOD & WM_event_modifier_flag
which have been removed. It also simplifies checking if modifier keys
have changed.
This means textures need to have the number of mipmap levels specified
upfront. It does not mean the data is immutable.
There is fallback code for OpenGL < 4.2.
Immutable storage will enables texture views in the future.
Without ray offsets intersections at neigbhoring triangles are found, as
the ray start is exactly at the vertex. There was a small offset towards
the center of the triangle, but not enough.
Now this offset computation is moved into Cycles and modified for better
results. It's still not perfect though like any offset approach, especially
with long thin triangles.
Additionaly, this uses the shadow terminate offset for AO rays now, which
helps remove some pre-existing artifacts.
This is similar to f8fe0e831e, which made the change to the
handle position attributes. This commit removes the way that setting the
`position` attribute also changes the handle position attributes. Now,
the "Set Position" node still has this behavior, but changing the
attribute directly (with the modifier's output attributes) does not.
The previous behavior was a relic of the geometry nodes design
from before fields and the set position node existed.
This makes the transition to the new curves data structure simpler.
There is more room for optimizing the Bezier case of the set position
node in the future.
Also fix a couple other places where normals layers weren't properly
tagged dirty or reallocated when the mesh changes.
Caused by cfa53e0fbe. When the size of a mesh changes,
the normal layers need to be reallocated. There were a couple of places
that cleared other runtime data with `BKE_mesh_runtime_clear_geometry`
but didn't deal with normals properly. Clearing the runtime "geometry"
is different from clearing the normals, because sometimes the size of
the normal layers doesn't have to change, in which case simply tagging
them dirty is fine.
Reverts 6d97fdc37e. A function like this should not return a different
tree-display object than of the requested type. This may hide errors,
and leaves the Outliner in an undefined state (where the stored display
mode doesn't match the tree-display object). I rather don't hide the
fact that all display-modes should be handled here, and emit a clear
error if one isn't.
When X-ray mode is active the selection is done using the mesh data to
select what is closest to the cursor. When GPU subdivision is active with
the "show on cage" modifier option, this fails as the mesh used for selection
is the unsubdivided one.
This creates a subdivision wrapper before running the selection routines to
ensure that subdivision is available on the CPU side as well.
Differential Revision: https://developer.blender.org/D14188
This was a double free error which happened because `BM_mesh_bm_from_me`
was taking ownership of arrays that were still owned by the Mesh. Note that
this only happens when the mesh is empty but some custom data layers still
have a non-null data pointer. While usually the data pointer should be null in
this case for performance reasons, other functions should still be able to
handle this situation.
Differential Revision: https://developer.blender.org/D14181
When exporting generated coordinates, the subdivision export code was
using the schema for the non-subdivision case, which is invalid as
non-initialized. This typo existed since the initial commit for the
feature (rBf9567f6c63e75feaf701fa7b78669b9a436f13dd).
The scale-to-fit option did nothing for single words when
the text box had a height. This happened because it was expected that
text would be wrapped however single words never wrap.
Now the same behavior for zero-height text boxes is used when text
can't be wrapped onto multiple lines.
The handle position attributes `handle_left` and `handle_right` had
rather complex behavior to get expected behavior when aligned or auto/
vector handles were used. In order to simplify the attribtue API and
make the transition to the new curves data structure simpler, this
commit moves that behavior from the attribute to the "Set Handle
Positions" node. When that node is used, the behavior should be the
same as before. However, if the modifier's output attributes were used
to set handle positions, the behavior may be different. That situation
is expected to be very rare though.
This adds a node with a boolean field output which returns true if all of the
points of the evaluated face are on the same plane. A float field input allows
for the threshold of the face/point comparison to be adjusted on a per face basis.
One clear use case is to only triangulate faces that are not planar.
Differential Revision: https://developer.blender.org/D13906
Recently we changed the build pipeline to always create a version
number in the url and point 'dev' to the latest version rather than creating the version number url once we release.
This makes the check to `bpy.app.version_cycle` unnecessary.
tbb/enumerable_thread_specific.h drags in windows.h
which will define min/max macro's unless you politely
ask it not to.
it's bit of an eyesore, but it is what it is
0fd72a98ac called functions to set bezier handle positions
that used uninitialized memory. The fix is to define the handle positions
explicitly, like before.
The main goal here is to add the boilerplate code to make it possible
to add the actual sculpt tools more easily. Both brush implementations
added by this patch are meant to be prototypes which will be removed
or refined in the coming weeks.
Ref T95773.
Differential Revision: https://developer.blender.org/D14180
This adds a node which copies part of a geometry a dynamic number
of times.
Different parts of the geometry can be copied differing amounts
of times, controlled by the amount input field. Geometry can also
be ignored by use of the selection input.
The output geometry contains only the copies created by the node.
if the amount input is set to zero, the output geometry will be
empty. The duplicate index output is an integer index with the copy
number of each duplicate.
Differential Revision: https://developer.blender.org/D13701
Sometimes it is useful to get the index ranges that are in an index mask.
That is because some algorithms can process index ranges more efficiently
than generic index masks.
Extracting ranges from an index mask is relatively efficient, because it is
cheap to check if a span of indices contains a contiguous range.
Drag Action was constantly resetting itself to "move".
Solve this by storing the tool settings per tool and no longer clear
gizmo properties when activating a new tool.
- Reserve "test" for tests & testing frameworks.
- Add "check_mypy" to "make help" text.
- Output to the standard output instead of redirecting to log-files,
leave redirecting output log-files to the user running the command.
The build-bot directly referenced this file and doesn't
have publically available configuration.
Add an empty file until this can be removed by the build scripts.
This will make the transition to the new curves data structure
a bit simple, since the handle types can be copied directly between
the two. The change to CurveEval is simple because it is runtime-only.
Helps with building against different OpenXR SDK versions (i.e. for
downstream builds that require specific versions), as the extension was
only defined since OpenXR 1.0.22.
These were only set in two places. One was related to "tessellated loop
normal", and the other derived corner normals. The values were never
checked though, after 59343ee162. The handling of dirty face
corner normals is clearly problematic, but in the future it should be
handled like the normal layers on the other domains instead.
Ref D14154, T95839
Currently, when normals are calculated for a const mesh, a custom data
layer might be added if it doesn't already exist. Adding a custom data
layer to a mesh is not thread-safe, so this can be a problem in some
situations.
This commit moves derived mesh normals for polygons and
vertices out of `CustomData` to `Mesh_Runtime`. Most of the
hard work for this was already done by rBcfa53e0fbeed7178.
Some changes to logic elsewhere are necessary/helpful:
- No need to call both `BKE_mesh_runtime_clear_cache` and
`BKE_mesh_normals_tag_dirty`, since the former also does the latter.
- Cleanup/simplify mesh conversion and copying since normals are
handled with other runtime data.
Storing these normals like other runtime data clarifies their status
as derived data, meaning custom data moves more towards storing
original/editable data. This means normals won't automatically benefit
from the planned copy-on-write refactor (T95845), so it will have to be
added manually like for the other runtime data.
Differential Revision: https://developer.blender.org/D14154
Allow SCREEN_OT_area_swap to operate between different Blender
windows, and other minor feedback improvements.
See D14135 for more details and demonstrations.
Differential Revision: https://developer.blender.org/D14135
Reviewed by Campbell Barton
Currently the RNA functions to add mesh elements like vertices
don't clear the runtime cache of things like triangulation, BVH
trees, etc. This is important, since they might be accessed with
incorrect sizes. This is split from a fix for T95839.
Atomic operations performed by the C++ standard library might require
libatomic on platforms which do not have hardware support for those
operations.
This change makes it that such configurations are automatically detected
and -latomic is added when needed.
Differential Revision: https://developer.blender.org/D14106
NOTE: This function is currently unused. However, it does use a callback
defined by a few RNA properties through
`RNA_def_property_editable_array_func`, so don't think it should be
removed without further thinking.
This function had two main issues:
* It was doing bitwise AND on potentially three sources of property
flag, when actually used `RNA_property_editable` just use one source
ever.
* It was completely ignoring liboverride cases.
TODO: Deduplicate code between `RNA_property_editable`,
`RNA_property_editable_info` and `RNA_property_editable_index`.
There was accidentally some displacement related code running even when not
using displacement.
Differential Revision: https://developer.blender.org/D14169
Previously, objects and geometries were mapped between frames
using different hash tables in a way that is incompatible with
geometry instances. That is because the geometry mapping happened
without looking at the `persistent_id` of instances, which is not possible
anymore. Now, there is just one mapping that identifies the same
object at multiple points in time.
There are also two new caches for duplicated vbos and textures used for
motion blur. This data has to be duplicated, otherwise it would be freed
when another time step is evaluated. This caching existed before, but is
now a bit more explicit and works for geometry instances as well.
Differential Revision: https://developer.blender.org/D13497
For an upcoming prototype we would introduced a new eTexPaintMode
option. That would add more cases and if statements. This change migrate
the eTexPaintMode to 3 classes. AbstractPaintMode contains a shared interface.
ImagePaintMode for 2d painting and ProjectionPaintMode for 3d painting.
Reset Defaults left the undo stack in an invalid state,
with the active undo step left at the previous state then it should
have been.
Now the buttons own undo logic is used to perform undo pushes.
1. Now handles cyclic strokes correctly.
2. Added a sharp threshold value to allow preservation of sharp corners.
Reviewed By: Antonio Vazquez (antoniov), Aleš Jelovčan (frogstomp)
Ref D14044
1. Now will remove lines if both adjacent faces are back face.
2. Added a check to respect material back face culling setting.
3. Changed label in the modifier to "Force Backface Culling" (which reflect more accurately with what the checkbox does).
Reviewed By: Antonio Vazquez (antoniov), Aleš Jelovčan (frogstomp)
Ref D14041
- No need for `normal_tx` array if we normalize the planes in `plane_tx`.
- No need to calculate the distance squared to a plane (with `dist_signed_squared_to_plane_v3`) if the plane is normalized. `plane_point_side_v3` gets the real distance, accurately, efficiently and also signed.
So normalize the planes of the member `CameraViewFrameData::plane_tx`.
This is a regression partially introduced in rB0a6f428be7f0.
Bones being transformed into edit mode were snapping to themselves.
And the bones of the pose mode weren't even snapping.
(Curious that this was not reported).
Since Python 3.10 is now supported on all platform,
bump the minimum version to reduce the number of Python versions that
need to be supported simultaneously.
Reviewed By: LazyDodo, sybren, mont29, brecht
Ref D13943
This is an alternate fix for T35170 since it caused T44415.
Having the undo system manipulate the key-block coordinates is error
prone as (in the case of T44415) there are situations when it's
important to apply the difference with the original shape key.
This reverts dab0bd9de6, and instead
avoids the problem by not using the data in `Mesh.key` as a reference
for updating shape-keys when exiting edit-mode.
The assumption that the `Mesh.key` in edit-mode won't be modified
until leaving edit-mode isn't always true. Leading to synchronization
errors. (details noted in code-comments).
Resolve this by using shape-key data stored in the BMesh.
Resolving both T35170 & T44415.
Details:
- Remove use of the original vertices when exiting edit mode.
- Remove use of the original shape-key coordinates when exiting
edit-mode (except as a last resort).
- Move shape-key synchronization into a separate function:
`bm_to_mesh_key`.
- Split the synchronization loop into two branches,
depending on the existence of BMesh shape-key coordinates.
- Always write shape-key values back to the BMesh CD_SHAPEKEY layers.
This was only done in some cases but is now necessary for all
shape-keys as these are used to calculate offsets where the `Mesh.key`
was previously used.
- Report a warning when the shape-key layer isn't found as this uses an
imperfect method of restoring coordinates which should only be used as
a last resort.
Reviewed By: mont29
Ref D14127
The problem was when the Object Offset was enabled because the Constant Offset flag was not checked and the offset always was added to the transformation matrix.
Limit the min and max of the IDProperty for the node group input
from 0 to infinity, and the soft min and max between 0 and 1.
Thanks to @PratikPB2123 for investigation.
Instead of accessing the `CD_NORMAL` layer directly,
use the proper API for accessing mesh normals. Even if the
layer exists, the values might be incorrect due to a deformation.
Related to ef0e21f0ae, 969c4a45ce, and T95839.
The flags overlapped ever since normalize was added, so this
requires versioning to copy the flag value. This needs to be
done both in Blender 3.1 and 3.2.
Differential Revision: https://developer.blender.org/D14165
The flags overlapped ever since normalize was added, so this requires
versioning to copy the flag value.
Differential Revision: https://developer.blender.org/D14165
The code was using the same flag value for different modifiers,
resulting in matching the toggle to random overlapping flags.
Differential Revision: https://developer.blender.org/D14165
The constraints solver is now able to handle more cases correctly.
Also the behavior of the boundary fixes is slightly changed if
the constraints thickness mode is used.
Differential Revision: https://developer.blender.org/D14143
The modifier supports arithmetic operations, like Add or Multiply,
but for some reason omits Minimum and Maximum. They are similarly
simple and useful math functions and should be supported.
Differential Revision: https://developer.blender.org/D14164
When RMB-select uses "Select Tweak" as a fallback tool,
ignore all bindings mapped to the Control key as these are
used for path selection.
This was fixed in 2a2d873124
however that caused shift-select to fail (T93100).
The node animation versioning code passes `nullptr` to the `oldName` and
`newName` parameters, but those weren't `NULL`-safe. I added an extra
check for this.
No functional changes, just a crash fix.
Previously, all operators using `PaintStroke` would have to store
the stroke in `op->customdata`. That made it impossible to store
other operator specific data in `op->customdata` that was unrelated
to the stroke.
This patch changes it so that the `PaintStroke` is passed to api
functions as a separate argument, which allows storing the stroke
as a subfield of some other struct in `op->customdata`.
Althought the float buffers are only used as cache, current code paths
don't look at the flags to identify which kind of image it is. Actual
fix would be to check flags, but that wouldn't be something to add one
week before release.
This commit fixes it by removing the buffers after use in the image
engine.
The previous behavior called RNA_enum_item_add a second time,
filled it's contents with invalid values then subtracted totitem,
this caused an unusual reallocation pattern where MEM_recallocN
would run in order to create the dummy item, then again when adding
another itme (reallocating an array of the same size).
Simply memset the array to 0xff instead.
Even though the size of the map was set back to DEFAULT_SIZE_EXP,
the underlying arrays were left unchained. In some cases this caused
further expansions to result in an unusual reallocation pattern
where MEM_reallocN would run expand the entries into an array
that was in fact the same size.
Bug was introduced in D12167.
Reading input size from an input socket is not possible in tiled compositor before execution is initialized. A similar change was done for the base class, see BlurBaseOperation::init_data().
Reviewed by: Jeroen Bakker
Differential Revision: https://developer.blender.org/D14067
This adds maintence overhead and it is not that useful when we have reset to default.
If this is something that we want it should be added dynamically.
Reviewed By: HooglyBoogly, Severin, #user_interface
Differential Revision: https://developer.blender.org/D14151
After using MEM_dupallocN() on the original item/binding, the
user/component path ListBase for the new item/binding needs to be
cleared and each path copied separately.
This commit should suffice to make the shader API agnostic now (given that
all users of it use the GPU API).
This makes the shaders not trigger a false positive error anymore since
the binding slots are now garanteed by the backend and not changed at
after compilation.
This also bundles all uniforms into UBOs. Making them extendable without
limitations of push constants. The generated uniforms from OCIO are not
densely packed in the UBO to avoid complexity. Another approach would be to
use GPU_uniformbuf_create_from_list but this requires converting uniforms
to GPUInputs which is too complex for what it is.
Reviewed by: brecht, jbakker
Differential Revision: https://developer.blender.org/D14123
This commit should suffice to make the shader API agnostic now (given that
all users of it use the GPU API).
This makes the shaders not trigger a false positive error anymore since
the binding slots are now garanteed by the backend and not changed at
after compilation.
This also bundles all uniforms into UBOs. Making them extendable without
limitations of push constants. The generated uniforms from OCIO are not
densely packed in the UBO to avoid complexity. Another approach would be to
use GPU_uniformbuf_create_from_list but this requires converting uniforms
to GPUInputs which is too complex for what it is.
Reviewed by: brecht, jbakker
Differential Revision: https://developer.blender.org/D14123
This removes manual handling of normals that was hard-coded
to false in the one place the function was called. This change
will help to make a fix to T95839 simpler.
It's better not to expose the details of where the dirty flags are
stored to every place that wants to know if the normals are dirty.
Some of these places are relics from before vertex normals were
computed lazily anyway, so this is more of an incrememtal cleanup.
This will make part of the fix for T95839 simpler.
Make relation match material and world nodes. Does not address the reported
issue regarding muted nodes, but another missing update found investigating.
This was an old issue, but recent image partial update changes made this more
likely to happen in some cases. Now ensure that whenever the rendered scene
switches the image is updated.
This patch aims to fix the issues presented in T87829 and T95331,
namely precision issues while connecting two nodes when being too
close together in the node editor editors, in a few cases even
resulting in the complete inability to connect nodes.
Sockets are found by intersecting a padded rect around the cursor
with the nodes' sockets' location. That creates ambiguities, as it's
possible for the padded rect to intersect with the wrong node,
as the distance between two nodes is smaller than the rect is padded.
The fix in this patch is checking against an unpadded rectangle in
visible_node().
Differential Revision: https://developer.blender.org/D14122
The problem was that the code for sorting polygons around a vertex
assumed that it was a manifold or boundary vertex. However in some cases
the vertex could still be nonmanifold causing the crash. The cases where
the sorting fails are now detected and these vertices are then marked as
nonmanifold.
Differential Revision: https://developer.blender.org/D14065
The "Fill Caps" option on the Curve to Mesh node introduced in
rBbc2f4dd8b408ee makes it possible to fill the open ends of the sweep
to create a manifold mesh.
This patch fixes an edge case, where caps were created even when the
rail curve (the curve used in the "Curve" input socket) was cyclic
making the resulting mesh non-manifold.
Differential Revision: https://developer.blender.org/D14124
In ffmpeg 5.0, several variables were made const to try to prevent bad API usage.
Removed some dead code that wasn't used anymore as well.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D14063
Significantly improves loading speed of preview images from disk, e.g. custom
previews loaded using `bpy.utils.previews.ImagePreviewCollection.load()`.
See D14144 for details & comparison videos.
Differential Revision: https://developer.blender.org/D14144
Reviewed by: Bastien Montagne
Currently, whenever any BMesh is converted to a Mesh (except for edit
mode switching), original index (`CD_ORIGINDEX`) layers are added.
This is incorrect, because many operations just convert some Mesh into
a BMesh and then back, but they shouldn't make any assumption about
where their input mesh came from. It might even come from a primitive
in geometry nodes, where there are no original indices at all.
Conceptually, mesh original indices should be filled by the modifier
stack when first creating the evaluated mesh. So that's where they're
moved in this patch. A separate function now fills the indices with their
default (0,1,2,3...) values. The way the mesh wrapper system defers
the BMesh to Mesh conversion makes this a bit less obvious though.
The old behavior is incorrect, but it's also slower, because three
arrays the size of the mesh's vertices, edges, and faces had to be
allocated and filled during the BMesh to Mesh conversion, which just
ends up putting more pressure on the cache. In the many cases where
original indices aren't used, I measured an **8% speedup** for the
conversion (from 76.5ms to 70.7ms).
Generally there is an assumption that BMesh is "original" and Mesh is
"evaluated". After this patch, that assumption isn't quite as strong,
but it still exists for two reasons. First, original indices are added
whenever converting a BMesh "wrapper" to a Mesh. Second, original
indices are not added to the BMesh at the beginning of evaluation,
which assumes that every BMesh in the viewport is original and doesn't
need the mapping.
Differential Revision: https://developer.blender.org/D14018
This commit renames enums related the "Curve" object type and ID type
to add `_LEGACY` to the end. The idea is to make our aspirations clearer
in the code and to avoid ambiguities between `CURVE` and `CURVES`.
Ref T95355
To summarize for the record, the plans are:
- In the short/medium term, replace the `Curve` object data type with
`Curves`
- In the longer term (no immediate plans), use a proper data block for
3D text and surfaces.
Differential Revision: https://developer.blender.org/D14114
Fix boundary error in `BLI_str_unescape_ex`. The `dst_maxncpy` parameter
indicates the maximum buffer size, not the maximum number of characters.
As these are strings, the loop has to stop one byte early to allow space
for the trailing zero byte.
Thanks @mano-wii for the patch!
When removing a node that has a dependence on an ID, like the object
info node, the dependency graph relations weren't updated. This can
cause unexpected performance issues if a complex node tree continues
to depend on an ID that it doesn't actually use anymore. To fix this case,
tag relations for an update if the node has a data-block socket.
Fixes part of T88332
Differential Revision: https://developer.blender.org/D14121
If there is no animation at all, or it's all hidden, the Euler Filter
operators poll now fails with a message that explains this a bit more,
instead of just the generic "context is wrong" error.
Reviewed By: sybren
Maniphest Tasks: T95135
Differential Revision: https://developer.blender.org/D13967
While this should not happen in theory, very bad/broken/dirty files can
lead to such situations.
So we need to re-ensure valid root IDs after resync (for now, done after
each 'library indirect level' pass of resync, this may not be 100%
bulletproof though, time will say).
Found while investigating Blender studio issues in Snow parkour short.
In some cases broken files could lead to selecting a shapekey as
hierarchy root ID, which is not allowed.
Found while investigating Blender studio issues in Snow parkour short.
When new display driver is given to the PathTrace ensure that there are
no GPU resources used from it by the work. This solves graphics interop
descriptors leak.
This aqlso fixes Invalid graphics context in cuGraphicsUnregisterResource
error when doing final render on the display GPU.
Fixes T95837: Regression: GPU memory accumulation in Cycles render
Fixes T95733: Cycles Cuda/Optix error message with multi GPU devices. (Invalid graphics context in cuGraphicsUnregisterResource)
Fixes T95651: GPU error (Invalid graphics context in cuGraphicsUnregisterResource)
Fixes T95631: VRAM is not being freed when rendering (Invalid graphics context in cuGraphicsUnregisterResource)
Fixes T89747: Cycles Render - Textures Disappear then Crashes the Render
Maniphest Tasks: T95837, T95733, T95651, T95631, T89747
Differential Revision: https://developer.blender.org/D14146
Add check for `NULL` `from` pointer to `BLO_main_validate_shapekeys`,
and delete these shapekeys, as they are fully invalid and impossible to
recover.
Found in a studio production file (`animation
test/snow_parkour/shots/0040/0040.lighting.blend`, svn rev `1111`).
Would be nice to know how this was generated too...
This adds initial support for edit mode for the experimental new curves
object. For now we can only toggle in and out of the mode, no real
interraction is possible.
This patch also adds empty menus in edit mode. Those were added mainly
to quiet warnings as the menus are programmatically added to the edit
mode based on the object type and context.
Ref T95769
Reviewed By: JacquesLucke, HooglyBoogly
Maniphest Tasks: T95769
Differential Revision: https://developer.blender.org/D14136
This adds the boilerplate code that is necessary to use the tool/brush/paint
systems in the new sculpt curves mode.
Two temporary dummy tools are part of this patch. They do nothing and
only serve to test the boilerplate. When the first actual tool is added,
those dummy tools will be removed.
Differential Revision: https://developer.blender.org/D14117
Previous implementation had a copy of the image user, which doesn't
contain all the data to identify changes. This patch introduces a new
struct to store the data and can be extended with other data as well
(color spaces, alpha settings).
Check for a camera-view before checking if the view is locked
to the cursor/object since the camera-view takes priority,
it reads better to check that first.
Also reuse the event offset variable.
NDOF navigation in a camera view now behaves like orthographic pan/zoom.
Note that NDOF orbiting out of the camera view has been disabled,
see code comment for details.
Resolves T93666.
For the attribute search button, the tooltip was missing
if the input socket type has attribute toggle activated.
Differential Revision: https://developer.blender.org/D14142
This affected loading of EXR files with set to Linear ACES colorspace, as
well as the sky texture for in some custom OpenColorIO configurations.
Use the builtin OpenColorIO transform from ACES AP0 to XYZ D65 to fix this.
The idea is to keep `is_any_zero` in the `blender::math` namespace,
so instead of trying to be clever, just move it there and expand the
function where it was used in the class.
I noticed that there were a few variables that should not be visible per default.
It seems to me to simply be an oversight, so I went ahead and cleaned them up.
Reviewed By: Sybren, Ray molenkamp
Differential Revision: http://developer.blender.org/D14132
This commit should suffice to make the shader API agnostic now (given that
all users of it use the GPU API).
This makes the shaders not trigger a false positive error anymore since
the binding slots are now garanteed by the backend and not changed at
after compilation.
This also bundles all uniforms into UBOs. Making them extendable without
limitations of push constants. The generated uniforms from OCIO are not
densely packed in the UBO to avoid complexity. Another approach would be to
use GPU_uniformbuf_create_from_list but this requires converting uniforms
to GPUInputs which is too complex for what it is.
Reviewed by: brecht, jbakker
Differential Revision: https://developer.blender.org/D14123
This is a bug on the Blender side, where the depsgraph does not have proper
relations for text object duplis and fails to include the required materials
in the dependency graph. But at least Cycles should not crash.
- No need for `normal_tx` array if we normalize the planes in `plane_tx`.
- No need to calculate the distance squared to a plane (with `dist_signed_squared_to_plane_v3`) if the plane is normalized. `plane_point_side_v3` gets the real distance, accurately, efficiently and also signed.
So normalize the planes of the member `CameraViewFrameData::plane_tx`.
FindOpenImageIO was updated to link to separate OpenImageIO_Util for new
versions, where it is required. For older versions, we can not link to it
because there will be duplicated symbols.
Ref D14128
FindOpenEXR was updated to find new lib names and separate Imath. It's all
added to the list of OpenEXR include dirs and libs.
This keeps it compatible with both version 2 and 3 for now, and doesn't
require changes outside the find module.
Ref D14128
Coarse meshes with high polycount would show as corrupted when GPU
subdivision is used with AMD cards This was caused by the OpenSubdiv
library not taking `GL_MAX_COMPUTE_WORK_GROUP_COUNT` into account when
dispatching computes. AMD drivers tend to set the limit lower than
NVidia ones (2^16 for the former, and 2^32 for the latter, at least
on my machine).
This moves the `GLComputeEvaluator` from the OpenSubdiv library into
`intern/opensubdiv` and modifies it to compute a dispatch size in a
similar way as for the draw code: we split the dispatch size into a 2
dimensional value based on `GL_MAX_COMPUTE_WORK_GROUP_COUNT` and
manually compute an index in the shader.
We could have patched the OpenSubdiv library and sent the fix upstream
(which can still be done), however, moving it to our side allows us to
better control the `GLComputeEvaluator` and in the future remove some
redundant work that it does compared to Blender (see T94644) and
probably prepare the ground for Vulkan support. As a matter of fact,
this patch also removes the OpenGL initialization that OpenSubdiv would
do here. This removal is not related to the bug fix, but necessary to not
have to copy more files/code over.
Differential Revision: https://developer.blender.org/D14131
Previously, the number of action map subactions was limited to two per
action (identified by user_path0, user_path1), however for devices with
more than two user paths (e.g. Vive Tracker) it will be useful to
support a variable amount instead.
For example, a single pose action could then be used to query the
positions of all connected trackers, with each tracker having its own
subaction tracking space.
NOTE: This introduces breaking changes for the XR Python API as follows:
- XrActionMapItem: The new `user_paths` collection property
replaces the `user_path0`/`user_path1` properties.
- XrActionMapBinding: The new `component_paths` collection property
replaces the `component_path0`/`component_path1` properties.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D13949
This fixes VR pink screen issues when using the DirectX backend, caused
by `wglDXRegisterObjectNV()` failing to register the shared
OpenGL-DirectX render buffer. The issue is mainly present on AMD
graphics, however, there have been reports on NVIDIA as well.
A limited workaround for the SteamVR runtime (AMD only) was provided
in rB82ab2c167844, however this patch provides a more complete solution
that should apply to all OpenXR runtimes. For example, with this patch,
the Windows Mixed Reality runtime that exclusively uses DirectX can now
be used with AMD graphics cards.
Implementation-wise, a `GL_TEXTURE_2D` render target is used as a
fallback for the shared OpenGL-DirectX resource in the case that
registering a render buffer (`GL_RENDERBUFFER`) fails. While using a
texture render target may be less optimal than a render buffer, it
enables proper display in VR using the OpenGL/DirectX interop (tested
on AMD Vega 64).
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D14100
After running the breakdown operator for the graph editor,
the factor property in the redo panel didn't reflect the value you chose
to mitigate that issue down the line there is a
new helper function to get the factor value, and
store it at the same time
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D14105
Ref: D14105
Brew's Python framework's site-packages is a symlink so the assumption
that Resources and site-packages would be in the same directory
doesn't hold. So install scripts etc relative to bpy.so. Part of D14111
StringGrid has been deprecated in openvdb 9.0.0 and will be removed soon
Reviewed By: Brecht
Differential Revision: http://developer.blender.org/D14133
The general idea here is to wrap the `CurvesGeometry` DNA struct
with a C++ class that can do most of the heavy lifting for the curve
geometry. Using a C++ class allows easier ways to group methods, easier
const correctness, and code that's more readable and faster to write.
This way, it works much more like a version of `CurveEval` that uses
more efficient attribute storage.
This commit adds the structure of some yet-to-be-implemented code,
the largest thing being mutexes and vectors meant to hold lazily
calculated evaluated positions, tangents, and normals. That part might
change slightly, but it's helpful to be able to see the direction this
commit is aiming in. In particular, the inherently single-threaded
accumulated lengths and Bezier evaluated point offsets might be cached.
Ref T95355
Differential Revision: https://developer.blender.org/D14054
Finding the greatest and/or smallest element in an array is a common
need. This commit refactors the point cloud bounds code added in
6d7dbdbb44 to a more general header in blenlib.
This will allow reusing the algorithm for curves without duplicating it.
Differential Revision: https://developer.blender.org/D14053
This is meant to complement the `blender::math` functions recently
added by D13791. It's sometimes desired to template an operation to work
on vector types, but also basic types like `float` and `int`. This patch
adds that ability with a new `BLI_math_base.hh` header.
The existing vector math header is changed to use the `vec_base` type
more explicitly, to allow the compiler's generic function overload resolution
to determine which implementation of each math function to use.
This is a relatively large change, but it also makes the file significantly
easier to understand by reducing the use of macros.
Differential Revision: https://developer.blender.org/D14113
Fix possible overflow of Modifier UUID
The code prior this change was re-generating modifier's session UUID
prior to copying this id from the source. This approach has a higher
risk of modifiers session UUID to overflow and start colliding with
existing modifiers.
This change makes it so that modifier copy does not re-generated the
session UUID unless it is needed.
Differential Revision: https://developer.blender.org/D14125
GLUT does not support offscreen contexts, which is required for the new
display driver. So we use SDL instead. Note that this requires using a
system SDL package, the Blender precompiled SDL does not include the video
subsystem.
There is currently no text display support, instead info is printed to
the terminal. This would require adding an embedded font and GLSL shaders,
or using GUI library.
Another improvement to be made is supporting OpenColorIO display transforms,
right now we assume Rec.709 scene linear and display.
All OpenGL, GLEW and SDL code was move out of core cycles and into
app/opengl. This serves as a template for apps that want to integrate
Cycles interactive rendering, with a simple OpenGLDisplayDriver example.
In general this would be adapted to the graphics API and color management
used by the app.
Ref T91846
Due to recent changes there have been reports of incorrect loading of
GPU textures. This fix reverts a part of {D13238} that might be the
source of the issue.
This does not happen with **any** image, but with images that have ID
properties.
ID properties are used to store view projection matrices (e.g. for
reprojection with `Image from View` or `Quick Edit` -- these are the
ones we are interested in), but of course they can be used for anything
else, too. The images in the file from the report have ID properties from
an Addon for example.
So the crash can reliably be reproduced with **any** image doing the
following:
```
bpy.data.images['myImage']['myIDprop'] = "foo"
```
This would lead code in `texture_paint_camera_project_exec` to think the
needed `view_data` is on the image (but in reality it was just some
other IDprop).
Solution is simple: just check `view_data` is really valid after getting
it from the IDprops.
Maniphest Tasks: T95787
Differential Revision: https://developer.blender.org/D14116
Having this setting stored in the image space caused low level selection
logic to have to pass around the image space (which could be NULL
in some cases). Use the tool-settings instead since there doesn't seem
to be much/any advantage in having this setting per-space.
Although rB56407432a6a did fix missing subdivision in some cases, in
other cases it did not return the mesh wrapper (like when using
autosmooth, which requires a copy of the mesh), so the non-subdivided
mesh was still returned.
Not all coarse vertices were used to compute the center value (off by
one), and the interpolation for the current would always start at the
base corner for the base face instead of the base corner for the current
patch.
This patch reverses the dependency between `BLI_math_vec_types.hh` and
`BLI_math_vector.hh`. Now the higher level `blender::math` functions
depend on the header that defines the types they work with, rather than
the other way around.
The initial goal was to allow defining an `enable_if` in the types header
and using it in the math header. But I also think this operations to types
dependency is more natural anyway.
This required changing the includes some files used from the type
header to the math implementation header. I took that change a bit
further removing the C vector math header from the C++ header;
I think that helps to make the transition between the two systems
clearer.
Differential Revision: https://developer.blender.org/D14112
This commit renames `mesh_validate.cc` to `mesh_calc_edges.cc`.
I would like to move `mesh_validate.c` to C++, but it makes sense to
keep this specific algorithm in a smaller file.
When running `./blender/build_files/build_environment/install_deps.sh` on Ubuntu 20.04.3 LTS the following error can be seen:
```
./blender/build_files/build_environment/install_deps.sh: line 1266: [: too many arguments
```
This error results from the call:
```
check_package_version_ge_DEB $CLANG_FORMAT $CLANG_FORMAT_VERSION
```
with `CLANG_FORMAT_VERSION` being undefined.
Also as `clang-format` 13 is already released and hopefully didn't break anything `CLANG_FORMAT_VERSION_MEX` could use version bump.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D13924
This adds a new sculpt mode to the experimental new curves object.
Currently, this mode can only be entered and exited, nothing else.
The main initial purpose of this node will be to use it for hair grooming.
The patch also adds the `editors/curves/` directory for the new curves
object, which will be necessary for many other things as well.
I added a completely new mode (`OB_MODE_SCULPT_CURVES`), because
`OB_MODE_SCULPT` seems to be rather specific to meshes, and reusing
it doesn't seem worth the trouble. The tools/brushes used in mesh vs.
curves sculpt mode are quite distinct as well.
I had to add DNA_userdef_enums.h to make the patch compile with C++
(forward declaration of enums isn't allowed). This follows the same
pattern that we use for other enums in dna.
Differential Revision: https://developer.blender.org/D14107
The path calculation method for animation players: frame-cycler, rv &
mplayer would fail when the number of digits exceeded the range of a
32bit int causing RenderData.frame_path() to raise a ValueError.
Use a simpler method of extracting the range that uses the sign to
detect the beginning of the number.
Since the output file stays unmodified for most developer builds,
install step installed it redundantly.
Create readme.html using `configure_file`:
- Now it's modified only if final output changes (handled by CMake).
- If input file (from git) or blender version changes,
it //will// be modified.
Also don't re-implement what CMake can do.
Reviewed By: campbellbarton, LazyDodo
Differential Revision: https://developer.blender.org/D13863
- Increment the argument index at the end of the loop.
Otherwise using the index after incrementing required subtracting 1.
- Move error prefix creation into a function: `pyrna_func_error_prefix`
so it's possible to create an error prefix without duplicate code.
This simplifies further changes for argument parsing from D14047.
Set "view2d_edge_pan" to true for the NODE_OT_translate_attach operator,
which is used by the duplication operator. This is done in the keymap so
that it's not hard-coded.
Differential Revision: https://developer.blender.org/D13934
The root issue was caused by a mistake in modifier copy data which was
wrongly re-generating source modifier data identifier.
The c8cca88851 simply exposed a bug in code which always was there
since the modifiers session UUID was introduced.
Shows an importance of const qualifier :)
Since now we delegate the evaluation of the last subsurf modifier in the stack
to the draw code, Cycles does not get a subdivided mesh anymore. This is because
the subdivision wrapper for generating a CPU side subdivision is never created
as it is only ever created via `BKE_object_get_evaluated_mesh` which Cycles does
not call (rather, it accesses the Mesh either via `object.data()`, or via
`object.to_mesh()`).
This ensures that a subdivision wrapper is created when accessing the object data
or converting an Object to a Mesh via the RNA/Python API.
Reviewed by: brecht
Differential Revision: https://developer.blender.org/D14048
This is requested by artist for some animation styles where is necessary to fill the area, but create a gap between fill and stroke.
Also some code cleanup and fix a bug in dilate for top area.
Reviewed By: pepeland, mendio
Differential Revision: https://developer.blender.org/D14082
The crash is caused as we did not check that the RNA pointer is null
before trying to use it. This moves the existing checks from the
modifier panels into the template functions so the logic is a bit
centralized.
The issue has two causes: on one hand origin indices were not handled
properly, on the other hand the extraction type (Mesh, BMesh, or mapped)
was not detected correctly.
For the second case reuse the MeshRenderData creation from the coarse
code path so that we make the same decisions. Loose geometry extraction
had to be updated to properly handle the BMesh cases.
For the origin indices, in some cases (for edges and faces), the arrays
used by the subdivision code already have the origin indices baked into
them, so mapping them a second time through the origin index layer is
wrong, and could cause out of bounds accesses.
For vertices especially, we would use two arrays: one for mapping
subdivision vertices to coarse vertices, and another one to map coarse
vertices to subdivision loops used for the selection index buffer. The
second one is now removed (which saves a bit of memory) as it is did not
have the proper data setup for use with the origin indices and we can
easily compute it using the first array anyway.
Fix segfault when calling `some_id.id_properties_ui("propname").update()`,
i.e. call the `update()` function without any keyword arguments. In such
a case, Python passes `kwargs = NULL`, but `PyDict_Contains()` is not
`NULL`-safe.
The Viewer marked the gpu texture to be out of date. But it should have used
the mark_full_update as the gpu textures
are only used by the render/draw engines.
The image/node editor uses the image engine that have its own GPU textures.
Currently one a single texture slot is used to update the screen.
Current design is implemented to use multiple textures.
for now limit the number of texture slots to 1.
This node is a bit of a weird case, because it uses the value stored in an
output socket as an input. So when we want to determine if the Dot
changed, we also have to check if the Normal output changed.
A cleaner solution would be to refactor this by either storing the normal
on the node directly (instead of in an output socket), or by exposing it
by a separate input. This refactor should be done separately though.
Currently whenever gl queries are performed for the viewport, a large
1024 byte array is allocated to store the query results (256 of them).
Unfortunately, if any gizmo using a `draw_select` callback is active
(e.g. the transform gizmos), these queries (and allocations) will occur
during every mouse move event.
Change the vector to allow for up to 16 query results before making an
allocation. This provides enough space for every built-in gizmo except
Scale Cage (which needs 27 queries). It also removes unnecessary
allocations from two other related vectors used during query processing.
Differential Revision: https://developer.blender.org/D13784
This is a regression partially introduced in rB0a6f428be7f0.
Bones being transformed into edit mode were snapping to themselves.
And the bones of the pose mode weren't even snapping.
(Curious that this was not reported).
This fix avoid the drif checking if the previous position is equals to new one, in this case, the pen has not moved and can be canceled.
Differential Revision: https://developer.blender.org/D13870
The animation playback did not take into account individual stereoscopic views.
This patch fixes this by playing back the active view render.
Reviewed By: campbellbarton
Maniphest Tasks: T91423
Differential Revision: https://developer.blender.org/D14070
Workaround for a compilation issue preventing kernels compiling for AMD GPUs: Avoid problematic use of templates on Metal by making `gpu_parallel_active_index_array` a wrapper macro, and moving `blocksize` to be a macro parameter.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D14081
A zero length vector was normalized and the resulting NaN used in further calculations.
This caused trouble on some compilers when using fast math.
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D14058
* Apple Silicon support enabled on macOS 12.2+
* AMD support enabled on macOS 12.3+
This patch also fixes a device enumeration crash on certain AMD configs which
was caused by over-release of MTLDevice objects.
Differential Revision: https://developer.blender.org/D14090
Improve the nodes' drop shadow by making it scale with the view
and replace the loop for the alpha calculation with something more
explicit.
The amount of drop shadow softness was scaled with the zoom level
and therefore had a fixed screen space size. DPI and UI scale
weren't taken into account either. This patch fixes both issues by
basing the shadow softness on the `widget_unit` that scales correctly
in zoomable views and takes UI scale etc. into account.
Differential Revision: https://developer.blender.org/D13356
* Replace license text in headers with SPDX identifiers.
* Remove specific license info from outdated readme.txt, instead leave details
to the source files.
* Add list of SPDX license identifiers used, and corresponding license texts.
* Update copyright dates while we're at it.
Ref D14069, T95597
Drivers make it way too easy to create dependenciy loops between IDs, so
need to use the same trick as in other dependency-following code in this
file to prevent those infinite loops.
hard to predict for sure how bad of a hierarchy root this can end up
producing, but in general cases think this should be OK.
The rbit instruction is only available starting with ARMv6T2 and
the register prefix is different from what AARCH64 uses.
Separate the 32 and 64 bit ARM branches, add missing ISA checks.
Made sure the code works as intended on macMini with Apple silicon,
and on Raspberry Pi 4 B running 32bit Raspbian OS.
Differential Revision: https://developer.blender.org/D14056
Reduce compute effort of liboverrides resync process by only re-syncing
the parts of the override hierarchy that actually need it.
The main change compared to existing code (which was systematically resyncing
a whole override hierarchy), is that resyncing now operates over several
sub-hierarchies at once, each defined by their own 'resync root' ID.
This ensures that we do not get several new overrides for the same data inside
of the same hierarchy.
Implements T95682.
Differential Revision: https://developer.blender.org/D14079
This patch increases the performance when remapping data.
{D13615} introduced a mechanism to remap multiple items in a single go.
This patch uses the same mechanism when remapping data inside ID datablocks.
Benchmark results when loading the village scene of sprite fright on AMD Ryzen 7 3800X 8-Core Processor
Before this patch 115 seconds
When patch applied less than 43 seconds
There is still some room for improvement by porting relink code.
Reviewed By: mont29
Maniphest Tasks: T95279
Differential Revision: https://developer.blender.org/D14043
Adds helper functions to debug IDRemapper data structure.
`BKE_id_remapper_result_string` converst a given IDRemapperApplyResult
to a readable form for logging purposes.
`BKE_id_remapper_print` prints out the rules inside a IDRemapper struct.
Instead of creating and destroying threads when starting and stopping renders,
keep a single thread alive for the duration of the session. This makes it so all
display driver OpenGL resource allocation and destruction can happen in the same
thread.
This was implemented as part of trying to solve another bug, but it did not
help. Still I prefer this behavior, to eliminate potential future issues wit
graphics drivers or with future Cycles display driver implementations.
Differential Revision: https://developer.blender.org/D14086
For reasons unclear, destroying and then recreating a vertex buffer in the
render OpenGL context is affecting the immediate mode vertex buffer in the
draw manager OpenGL context.
Instead just create a single vertex buffer and use it for the lifetime of
the render OpenGL context. There's not really any need to have a separate
one per tile as far as I can tell.
Differential Revision: https://developer.blender.org/D14084
This adds support for exporting attributes from a Blender Curves object to Cycles.
The implementation follows that of the Mesh object. This also creates motion blur
data if the "velocity" attribute is present on the Curves.
Ref T94193
Reviewed By: brecht
Maniphest Tasks: T94193
Differential Revision: https://developer.blender.org/D14088
Due to the freeing and re-creation of textures performed when binding
offscreen viewports, VR viewport textures would be needlessly
re-created every drawing iteration, leading to a negative impact on VR
frame rate.
This was brought to light by 6738ecb64e, which introduced an
additional texture clear operation on initialization and was
prohibitively costly on some systems when performed every frame.
Now, the textures for VR viewports will not be always re-created
during offscreen binding, but only when necessary using a pre-drawing
step (`wm_xr_session_surface_offscreen_ensure()`).
Reviewed By: jbakker, fclem
Differential Revision: https://developer.blender.org/D14059
When using a RGBA16 (`GL_RGBA16`, `DXGI_FORMAT_R16G16B16A16_UNORM`)
swapchain format with Quest 2, no image is presented to the headset.
This can occur when using the SteamVR runtime with an AMD graphics card
(ex. T95374).
Workaround is to move this format after the Quest 2-compatible RGBA16F
formats in the candidates list so that the RGBA16F formats are chosen
instead.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D14024
Crash was caused since the function pointers
`s_xrGetOpenGLGraphicsRequirementsKHR_fn`/
`s_xrGetD3D11GraphicsRequirementsKHR_fn` were static and were not
updated with the correct proc address after being set the first time.
As stated in the OpenXR spec: "function pointers returned by
xrGetInstanceProcAddr using one XrInstance may not be valid when used
with objects related to a different XrInstance".
Although it would seem reasonable that the proc address would not
change if the instance was the same (hence the `static XrInstance s_instance;`),
in testing, repeated calls to `xrGetInstanceProcAddress()`
with the same instance still can result in changes (at least for the
SteamVR runtime) so the workaround is to simply set the function pointers
every time, essentially trivializing their `static` designations.
Reviewed By: Severin
Maniphest Tasks: T94268
Differential Revision: https://developer.blender.org/D14023
For the majority of node groups created in Blender 3.0 the behavior does not change.
So far we only found a single file where this setting has an effect.
Differential Revision: https://developer.blender.org/D14078
For an upcoming project we would want to match multiple id types in a
single go. To not replicate the implementation using other types we
introduce `BKE_library_id_can_use_filter_id` that returns all supported
types as a filter.
Not all ID types have a filter_id (ID_LI, ID_KE, ID_SCR) These
exceptions are not available in the filter_id function.
Reviewed By: mont29
Maniphest Tasks: T95279
Differential Revision: https://developer.blender.org/D14061
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
Complex Solidify creates edge bevel weights on the rim if the
according vertex has some vertex bevel weight. If there are no
edge bevel weights, they were left disabled even if vertex bevel
weights are used.
Some curve objects don't have an evaluated mesh at all, but line art
currently assumes that all curve objects have one before converting
it to a mesh internally. Fix this by checking if the curve object has an
evaluated mesh before skipping it.
The remaining problem is that evalauted from non-mesh objects or
evaluated curves from non-curve objects, etc. will be ignored if
"Allow Duplicates" is off. That's a different problem though.
Differential Revision: https://developer.blender.org/D14036
For curve-heavy scenes, memory consumption regressed when we switched from MetalRT to bvh2. Allow users to opt in to MetalRT to workaround this.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D14071
Disable binary archives on Apple Silicon (issue stems from instancing multiple PSOs from the same binary archive). Pipeline creation still filters through the OS shader cache, mitigating any impact on setup times after the initial render.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D14072
This is part of the project of converting `MVert` into `float3`.
(more details in T93602), The pbvh update flag is removed and
replaced with a bitmap stored in the PBVH structure. This
patch is similar to D13878. This is mainly setup for an eventual
performance improvement by removing the extra data from
mesh vertices, but if it's consistent with testing in the other patch
doing the same thing for another "temp tag", then it may actually
increase the speed of sculpt code slightly, since less memory needs
to be loaded when checking/changing the flags.
Differential Revision: https://developer.blender.org/D14000
The main issue is that the image and image user is not updated correctly
in `rna_ImageUser_update`. `BKE_image_user_frame_calc` does not set the
correct frame, because the image is null. Also `IMA_GPU_REFRESH` is not
set for the same reason.
When gpu materials are first created, it is expected that the frame is set
correctly, and the flag is set if necessary. Therefore, somewhere during
depsgraph evaluation, those have to be updated. The depsgraph node
to do the update existed already. Now there is a new relation so that it is
executed when the node tree changed, not only when the frame changed.
This is partially caused by a stupid mistake in cfa53e0fbe
where I missed initializing the `vert_normals` pointer in
`MResolvePixelData`. It's also caused by questionable assumptions
from DerivedMesh code that vertex normals would be valid.
The fix used here is to create a temporary mesh with the data necessary
to compute vertex normals, and ensure them here. This is used because
normal calculation is only implemented for `Mesh` and edit mesh, not
`DerivedMesh`. While this might not be great for performance, it's
potentially aligned with future refactoring of this code to remove
`DerivedMesh` completely. Since this is one of the last places the data
structure is used, that would be a great improvement.
Differential Revision: https://developer.blender.org/D13960
While applying liboverrides on linked data, RNA code (in
`rna_property_override_check_resync`) would detect a lot of false positive
regarding IDs needing resync, because the temporary ID used to apply
overrides was always local, breaking the libraries comparison check.
NOTE: that whole 'apply liboverrides' code could use some refreshment,
it did not change much from initila version several years ago, we now
have better tools and control over non-main data.
But for now the 'trick' in that commit should do the job, ultimately
those temps IDs should never be put in Main at all.
Although the documentation says so, the null-terminator was missing.
This could cause crashes when logging shader linking errors as shader
sources are empty in this case.
This adds support for rendering arbitrary attributes on point domains.
For now only float, float2, and float3 attributes are supported. For
more attribute types, and domains, a more flexible system to gather
needed attributes will be required, as we are currently running out of
bits.
This uses GeometrySets to import data from Alembic cache. The main idea
is to easily extend the modifier's capabilities by directly generating
an object of the right type instead of always outputing a Mesh.
This will also make it much easier to use Alembic objects from Geometry
nodes until a Alembic node is available there, and can be considered a
first step to supporting such a node.
For meshes, nothing really changes.
For points, a PointCloud object is generated, which can also be used
inside of Geometry nodes. The radius information is also read now, as
well as arbitrary attributes.
For curves, the CurveEval is directly modified if the data did not
change. Otherwise, we keep the current behavior of modifying the
original Curve object and create a new CurveEval from it.
This adds support for reading arbitrary attributes from Alembic
archives.
This is for now only supported for meshes and point clouds (as it reuses
the CDStreamConfig from the Mesh), although it is being made generic
with the usage of an ID and Blender's attribute API. Attributes are
added either on points, face corners, or faces depending on their
original scope.
In order to choose which attributes to load, parameters are added to let
users input the names of the attributes. The names have to be comma
separated, and are segregated by domain (point, face, face corners). A
wildcard (*) can be used to load every attribute of the domain.
Since some software export vector or color attributes as a flat array of
floats, a mechanism to remap attributes is added and accessible through
the user interface. Remapping is only available for float and double
types. The arrays can be remapped to UV maps, vertex colors, float2,
float3, color types, and vertex groups.
Supported attribute types are bool, int, float, 2D & 3D vectors, uvs,
and colors, as well as double precision versions of those.
This adds support for Alembic archive layers for the Blender CacheFile
and the Cycles Alembic procedural.
Layers are a feature of the Alembic library in which an archive can be
opened from a list of archives or file paths, and where archives
override data from the others. The order of the files matter since
latter files override data from former ones (i.e. a stack).
This feature is useful to, for example, replace a UV map or the
animation of an object without having to re-export the entire scene;
only the affected hierarchy needs to be re-exported, and "imported" as a
layer.
This adds a UI list for adding layers to the CacheFile, with buttons to
change their relative order. The filepath of the CacheFile is
implicitely considered as the bottom layer, although it is not shown as
such in the UI.
In the future, maybe with T68933, this could be the basis for a non-
destructive workflow where edits to an Alembic archive are exported as
layers.
2021-10-06 03:55:30 +02:00
6684 changed files with 45972 additions and 119954 deletions
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
