This is generally what people expect when generating a cone. Note that
this translation currently happens after the rotation, but since the rotation
will likely be removed in the future, that won't be a problem for long.
This patch adds the remaining 6 interpolations for mesh domains.
The new interpolations are:
- Corner / point / polygon to edge
- Edge to corner / point / polygon
After this it is possible to adapt an attribute to and from every
mesh domain. This is simple to test with the "Attribute Convert" node.
Though, as a note for the future, there are still some improvements
possible to the interpolations, like lazily calculating values for the
interpolations where it's possible, and slightly improving the
algorithms used for some interpolations, like using corner angles
for polygon to point.
Differential Revision: https://developer.blender.org/D10765
This is not only potentially extremely expensive, it is also fairly
futile, and code is not designed to handle it currently anyway (could
easily end up in inifinite loops and other crashes).
- Remove use of evaluated poses, instead calculate transformations
into an array which is applied afterwards.
- Only update ID's for poses that have been changed.
This is simply a convenience when using this type. More similar
constructors can be added in the future when they are useful.
Differential Revision: https://developer.blender.org/D10714
Allow python access to the `reset_view` functionality which before
was only available through the menu. This was suggested for
consistency after D10561.
Differential Revision: https://developer.blender.org/D10595
The size in the transform matrices was extra, since it is also
passed as an argument to the BMesh operators.
Differential Revision: https://developer.blender.org/D10763
Previously even if the input goemetry set had no point cloud or no mesh
instances, `geometry_set_realize_instances` would create empty data.
This isn't necessarily bad, but it can complicate things down the line if
there are a bunch of empty components getting passed around.
This was reported for geometry nodes, but was true for all nodetrees
(e.g. after deleting the active node). Geometry node trees just made
this more obvious since they start without an active node to begin with.
Fix provided by @lone_noel, thx!
Maniphest Tasks: T86677
Differential Revision: https://developer.blender.org/D10762
Caused by {rB2917f550caa9} which renamed the entry in the toolsystem,
but not the corresponding keymap.
Maniphest Tasks: T86548
Differential Revision: https://developer.blender.org/D10725
Since {rB46aa70cb486d}, using `NC_SPACE | ND_SPACE_VIEW3D` as notifier is
restricted to space data as a reference. This was still used though for
RNA updates in other places (namely `rna_camera`, `rna_scene`,
`rna_animviz`), and passing NULL would automatically set the notifier
reference to the owner id. Above commit would happily filter these out,
leading to missing refreshes.
Now use more specific notifiers (in case of animviz a new
`ND_DRAW_ANIMVIZ` was added).
This was reported for Camera background images btw.
Fixes T86670.
Maniphest Tasks: T86670
Differential Revision: https://developer.blender.org/D10758
Data-block selectors (or other selectors using the
`UILayout.teamplate_search` or `UILayout.template_search_preview`)
in headers used a fixed size width for the name button. Often that meant
the text would be clipped to fit even though there was plenty of
whitespace surrounding the data-block selector.
Now the name button can increase in width with the contained string,
clamped to some arbitrary and quite big maximum (3 times the minimum
width).
We could further take the available space into account, to reduce the
need for scrolling in the header. But I don't think that is much of an
issue and the name clipping it would re-introduce would probably be more
annoying.
Only use non included objects for potential occlusion queries.
Don't calculate lines for them.
This fixes intersection lines appearing on objects not included by the
lineart modifier.
When doing a box selection in the dopesheet in the header area, the data block type was changed to annotation because the pointer was not usable and produced an unexpected result.
Thanks to @pullup for finding a way to reproduce the bug.
This introduces two functions to the blenloader module, here shown as
calls for brevity:
* `temp_lib_ctx = BLO_library_temp_load_id(real_main, blend_file_path, idcode, idname, reports);`
* Now the data in `temp_lib_ctx->temp_id` can be used (but ought not to
be not assigned to non-temp datablocks).
* `BLO_library_temp_free(temp_lib_ctx);`
The first loads a datablock from a blend file, and returns it as part of
a `struct TempLibraryContext`. This struct contains the temp-loaded ID,
as well as enough information to correctly free everything again.
Differential Revision: https://developer.blender.org/D10736
Transforms in certain cases
This was caused by wrong flag checking in {rB278011e44d43}, which just
seems to be a copy-paste error.
For example, enabeling 'Auto-Offset' in the View menu would lead to CM
being ignored.
Maniphest Tasks: T86219
Differential Revision: https://developer.blender.org/D10751
Following concerns raised in the commit that changed the name initially,
rB2e19509e60b39837, it makes more sense to keep the "Surface" name for
this node because it has a specific meaning that should not be confused
with other types of subdivision.
Changes include:
- Use `IFACE_` for UI labels set in the modifier panels
- Use a sub-sub-panel for transparency
- Fix grammar and spelling mistakes
- Use more natural user-friendly wording
- Make descriptions more specific and more useful
- Don't capitalize "line art" in descriptions (tooltips)
These changes are aimed at making the UI strings more consistent with
the rest of the UI and being more helpful to someone trying to understand
how to use the modifier.
Differential Revision: https://developer.blender.org/D10750
`NodeTreeRef` is a thin wrapper on top of `bNodeTree`. By default it
should not hide anything from the underlying `bNodeTree` (before this
it was hiding muted links).
For convenience some "derived" data is cached on sockets. For example
all the connected sockets when reroutes and muted links are ignored.
A nice side benefit of this refactor is that `NodeTreeRef` requires
less memory than before.
This makes more visible where ends each keyframe. To use, as we did before, full block sometimes looks hard to view where a keyframe ends.
Reviewed By: pepeland, mendio, Severin
Differential Revision: https://developer.blender.org/D10588
This patch adds the ability to mute individual wires in the node editor.
This is invoked like the cut links operator but with a new shortcut.
Mute = Ctrl + Alt
Cut = Ctrl
Dragging over wires will toggle the mute state for that wire.
The muted wires are drawn in red with a bar across the center.
Red is used in the nodes context to indicate invalid links, muted links and internal links.
When a wire is muted it exposes the original node buttons which are normally hidden when a wire is connected.
Downstream and upstream links connected using reroute nodes are also muted.
Outside scope of patch:
- Add support for pynodes e.g. Animation Nodes
- Requires minor change to check for muted links using the `is_muted` link property or the `is_linked` socket property.
Maniphest Tasks: T52659
Differential Revision: https://developer.blender.org/D2807
The "Operator Cheat Sheet" operator collects info about all operators, and as
part of that executes the callbacks to create dynamic enums. The callback to
enumerate the Outliner ID operations depends on Outliner context. If this isn't
available, it can just return a context-less version of the enum, that is, a
static enum with all available items. This was already done in case no context
is available at all.
This change shows the object or material name with the cursor when picking for a cryptomatte node.
Reviewed By: Julian Eisel
Differential Revision: https://developer.blender.org/D10705
Recursive restrict selection (hide/selectable flag) & renaming
edit-bones both used the active object, even when bones for another
non-active object were being operated on.
Bone renaming would rename a bone in the active object
(if that name exists).
This commit includes nodes to build the following primitives:
- Cone
- Cylinder
- Circle
- Cube
- UV Sphere
- Ico Sphere
- Line
- Plane/Grid
In general the inputs are the same as the corresponding operators
in the 3D view.
**Line Primitive**
The line primitive has two modes-- adding vertices between two end
points, or adding vertices each at an offset from the start point.
For the former mode, there is a choice between a vertex count
and a distance between each point.
**Plane Primitive**
This commit includes the "Plane" and "Grid" primitives as one node.
Generally primitives are named after the simpler form of the shape they
create (i.e. "Cone" can make some more complex shapes). Also, generally
you want to tweak the number of subdivisions anyway, so defaulting to
plane is not an inconvenience. And generally having fewer redundant
base primitives is better.
**Future Improvements**
A following patch proposes to improve the speed of the cylinder, cone,
and sphere primitives: D10730. Additional possible future improvements
would be adding subdivisions to the cube node and rings to the cone
and cylinder nodes.
Differential Revision: https://developer.blender.org/D10715
This adds the LineArt grease pencil modifier.
It takes objects or collections as input and generates various grease
pencil lines from these objects with the help of the active scene
camera. For example it can generate contour lines, intersection lines
and crease lines to name a few.
This is really useful as artists can then use 3D meshes to automatically
generate grease pencil lines for characters, enviroments or other
visualization purposes.
These lines can then be baked and edited as regular grease pencil lines.
Reviewed By: Sebastian Parborg, Antonio Vazquez, Matias Mendiola
Differential Revision: http://developer.blender.org/D8758
Add implicit `int32 to Color4f` conversion. Matches `int32 to float3` conversion logic.
This may not be the most useful conversion but prevents an error in the Attribute Convert node.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10686
Build proxies automatically when added to sequencer timeline and when
switching preview size.
This behavior can be disabled in user preferences.
Reviewed By: sergey, fsiddi
Differential Revision: https://developer.blender.org/D10363
Use h264 codec for output. This codec produces smaller files, can be
multithreaded and decodes even faster than MJPEG.
Quality setting 0-100 corresponds to "Lowest Quality" to
"Perceptually Lossless" in Blender's h264 encoding presets.
All available cores are used for decoding.
Same goes for decoding but only for codecs that supports this
(h264, vp9 seems to support this option out of th box as well).
Other decoders can probably be optimized in similar way, but threaded
encoding provides significant boost already.
I have tested variety of codecs, and all were transcoded properly.
Reviewed By: sergey, fsiddi
Differential Revision: https://developer.blender.org/D10731
- Remove Full Render size from VSE preview size. Use just 100% instead.
- Add Use Proxies checkbox to control whether proxies are used globally
- Move preview size to top so it is most prominent
- Set default to 100% preview size and use proxies
Reviewed By: sergey, fsiddi
Differential Revision: https://developer.blender.org/D10362
Problem is, when a collection is excluded from the scene, none of its
objects are technically instantiated.
This should not happen when *creating* an override, but can be fairly
common during resync process.
For now, use a lesser precise check in resync case, only relying on
object usercount. This might lead to some objects being left without any
collection in some rare weird case, but this cannot really be avoided
currently.
Allow downloading of source packages of Blender's dependencies, so that
it's easier to provide a "full source archive" that contains the blender
source + all dependencies archives. A `make` command for this will be
introduced soon.
This changes the deps builder slightly to be more flexible with the
origin of our source packages.
To support this a new CMake variable has been added called `PACKAGE_DIR`
where all sources archives will be stored.
default: a directory called `packages` in the build folder.
alternative-default: if a directory called `packages` exists in the
blender source folder that will be used. This is to support the "full
source archive" use case.
The download phase have been moved from the build phase to the configure
phase. Configure will download all sources validate the hashes while
downloading.
All `[depname].cmake` files have been changed to take a local
`file://[path_to_local_tarball]` path rather than a remote URI.
A second requirement was that there needed to be an option to grab the
sources from the blender SVN mirror rather than upstream. For this an
option has been added PACKAGE_USE_UPSTREAM_SOURCES (default ON). The
exact location in SVN still needs to be worked out, I tested with my
local webserver and codewise it checks out. The path that is in there
currently will not work (given there is no mirror there yet).
To build this mirror our local package caches can be used.
Reviewed By: lazydodo
Differential Revision: https://developer.blender.org/D10598
Changes to increase subdivision by one along both axis (X and Y)
For example with x_segment = 3 and y_segment = 3.
There should be 16 vertices ((3 + 1) * (3 + 1)) for correct
number of subdivisions. Currently they are 3 * 3 = 9 vertices.
Ref D10699
Seems like one of the example files on the cryptomatte github is
malformed and blender crashes when loading that file. This change will
try to load as much as possible from the manifest so it can still be
used.
This has also been reported to cryptomatte project.
Use a for loop that always begins with the active object,
instead of moving the active object in the array,
which failed when it's data already being handled.
While the existing logic could have been fixed,
it's simpler to change the loop order.
In the current implementation, cryptomatte passes are connected to the node
and elements are picked by using the eyedropper tool on a special pick channel.
This design has two disadvantages - both connecting all passes individually
and always having to switch to the picker channel are tedious.
With the new design, the user selects the RenderLayer or Image from which the
Cryptomatte layers are directly loaded (the type of pass is determined by an
enum). This allows the node to automatically detect all relevant passes.
Then, when using the eyedropper tool, the operator looks up the selected
coordinates from the picked Image, Node backdrop or Clip and reads the picked
object directly from the Renderlayer/Image, therefore allowing to pick in any
context (e.g. by clicking on the Combined pass in the Image Viewer). The
sampled color is looked up in the metadata and the actual name is stored
in the cryptomatte node. This also allows to remove a hash by just removing
the name from the matte id.
Technically there is some loss of flexibility because the Cryptomatte pass
inputs can no longer be connected to other nodes, but since any compositing
done on them is likely to break the Cryptomatte system anyways, this isn't
really a concern in practise.
In the future, this would also allow to automatically translate values to names
by looking up the value in the associated metadata of the input, or to get a
better visualization of overlapping areas in the Pick output since we could
blend colors now that the output doesn't have to contain the exact value.
Idea + Original patch: Lucas Stockner
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D3959
Callbacks used in `bpy.props` didn't hold a references to the functions
they used.
While this has been the case since early 2.5x it didn't cause any
problems as long as the class held a reference.
With Python 3.10 or when using `from __future__ import annotations`,
the annotations are no longer owned by the class once evaluated.
Resolve this by holding a reference in the module, which now supports
traverse & clear callbacks so the objects are visible to Python's
garbage collector.
Also refactor storage of Python data, moving from an array into a struct.
This is an implementation that is about 1.5-2.1 times faster. It gives a result
that is on average 6° different from the old implementation. The difference is
because normals (Ng, N, N') are not selected to be coplanar, but instead
reflection R is lifted the least amount and the N' is computed as a bisector.
Differential Revision: https://developer.blender.org/D10084
Offset the starting point of segments by a random amount to avoid the bounding
box shape affecting the result and creating artifacts.
Differential Revision: https://developer.blender.org/D10576
Static initialization order was not guaranteed to be correct for node base
types. Now wrap all initialization in accessor functions to ensure the order
is correct.
Did not cause any known bug on Linux/macOS/Windows, but showed up on this
platform.
The issue was caused by a prediction algorithm detecting tracking the
wrong way. Solved by passing tracking direction explicitly, so that
prediction will always happen correctly regardless of the state of the
Tracks context.
This was cause by the change of some epsilon values for reflections.
This commit changes the planar reflection tracing to have correct
handling of parallel rays and discard any self intersection with normal
screen raytrace.
The issue is that the `last_node_hovered_while_dragging_a_link` pointer is invalidated on undo.
The pointer does not have to be on the space runtime data, because it only needs to exist
as long as the operator is running.
Differential Revision: https://developer.blender.org/D10726
This exposes the `crease` attribute, that is used by the Subdivide Smooth node.
It is also the first attribute on the edge domain. Domain interpolations for the
edge domain have not been implemented yet.
Ref T86397.
Differential Revision: https://developer.blender.org/D10660
Attempt to work around some full-corruption cases created at the studio.
Not clear how those were created, so not really fixing anything here,
just detecting and 'solving' as best as possible some high corruption of
local overrides.
This is good to have in general anyway, might help prevent further
corruption to happen too.
is hidden from the viewport
Check visibilty (as done in workbench_cache_populate) in
overlay_edit_uv_cache_populate as well.
Maniphest Tasks: T86542
Differential Revision: https://developer.blender.org/D10724
This is a refactor and no functional changes are expected.
The goal is to make it simpler to add other data sources without having
to repeat the drawing code everywhere. Also, having the `CellValue` class
allows us to implement filtering and sorting in a more generic way.
There are two caveats of the current implementation which still need
to be resolved in a separate step:
* In theory the data on the original object can be editable in the spreadsheet.
* If a complex object is in edit mode, and its original data is displayed,
the drawing code can be slow, because the bmesh is converted to a mesh
every time. The proper solution is to draw the data from the bmesh directly.
This should become easier after an upcoming refactor.
Ref T86141.
Differential Revision: https://developer.blender.org/D10701
This implements the status bar as footer region in the
spreadsheet editor.
It shows the total number of rows and columns as well
as how many rows are actually visible (based on the filter).
The implementation stores the stats in a runtime struct during
drawing and the status bar reads from that struct.
Ref T86142.
Differential Revision: https://developer.blender.org/D10693
The shader was filtering everything but the selected color.
The fix inverts the check to make sure that color is selected.
Reviewed By: fclem
Maniphest Tasks: T86370
Differential Revision: https://developer.blender.org/D10670
- Split out auto-save file writing from timer code.
- Add wm_autosave_timer_begin so there are both begin & end functions.
- Replace WM_event_add_timer/WM_event_remove_timer with begin/end calls.
Previously all blend files included the path they were saved,
causing files distributed publicly to include users local paths.
This also included developers home directories for startup & userprefs
defaults & app-templates bundled with Blender.
Now recovery information is only written for auto-save & quit.blend
since this is the only time they're intended to be used.
I had done some experiments to see what Fast boolean did for material
mapping and thought it just used the same slot in the target as the
slot in the source. The truth is more complicated: if the target material
exists in any slot of the destination, we need to remap to whatever
slot has the matching material. I fixed Exact Boolean to do this.
Since the materials may be in the object, this means that BKE_mesh_boolean
had to get another argument, the remapping arrays.
I will note that the current behavior of Fast, and now Exact, is not ideal.
Ideally, if the source material does not exist in the target, a new material
slot should be created in the target and the source material copied there
(and incrementing the material's reference count). Maybe a future project,
but for now, I want the behavior of Exact to match that of Fast.
Accumulate error caused by the low amount of integration slices and
correct it for the low roughness surfaces.
This increases light leak but it is less distracting than dark fringe
everywhere.
This checks the generated key-map data matches the result of
re-exporting and re-importing.
This shows up various inconsistencies, including:
- Unused keymaps.
- Unknown/unused data in the keymap.
- Event arguments that don't make sense.
- Event values that don't match the event type
(tweak direction on keyboard event for example).
A block of code ran when `wm_keymap_update_flag` was non-zero,
replace this with explicit flag check since it wasn't
immediately obvious which flag needed to be set.
While this still isn't done by default on startup,
activating a key-config will load it as expected.
Needed to perform key-map loading tests in background mode.
This is necessary to make float sockets display a value with the unit
system. `PROP_DISTANCE` will be used quite a lot by the mesh primitives
geometry nodes patch.
Differential Revision: https://developer.blender.org/D10711
The shader was not using the horizon texture and was trying to
trace the AO again.
Also the depth reconstruction was off because now using the maxzBuffer.
Currently (in geometry nodes) you can delete the group input or group
output nodes with no way to get them back without copy and paste. This
adds them to the "Group" submenu of the add menu so at least there is
a way to add them back.
Additionally, these nodes are moved to the "Group" submenu for all node
editors. This makes sense since they are not like the other input or
output nodes, they really just relate to how groups are organized.
Differential Revision: https://developer.blender.org/D10241
This happens when the normal is too much deformed to give valid
reflection even after ensure_valid_reflection.
Cycles seems to not handle this case either so we just discard the
rays.
Simple divide by 0 error. The input radius was assumed to be safe
but is not when the user can scale it arbitrarly.
This also move the division out of the loop.
We now reuse 9 hitpoints from the neighboorhood using a blue noise
sample distribution as mentionned in the reference presentation.
Reusing more rays does however make some area a bit more blury.
The resulting noise is quite lower compared to previous implementation
which was only reusing 4 hits.
This make sure the rays are generated randomly from a fullres
texel center.
This creates more noise but increase the convergence when doing
half res tracing.
This split is to make code easier to manage and rename the files to
`effect_reflection_*` to avoid confusion.
Also this cleans up a bit of the branching mess in the trace shader.
This commit adds a `normal` attribute on the polygon domain. Since
normal data is derived data purely based off of the location of each
face's vertices, it is exposed as a read-only attribute. After
rB80f7f1070f17, this attribute can be interpolated to the other domains.
Since this attribute is a special case compared to the others, the
implementation subclasses `BuiltinAttributeProvider`. It's possible
there is a better way to abstract this. Something else might also
become apparent if we add similar read-only attributes.
See rB2966871a7a891bf36 for why this is preferred over the previous
implementation.
Differential Revision: https://developer.blender.org/D10677
After further thought, the implementation of the "normal" attribute
from D10541 is not the best approach to expose this data, mainly
because it blindly copied existing design rather than using the
best method in the context of the generalized attribute system.
In Blender, vertex normals are simply a cache of the average normals
from the surrounding / connected faces. Because we have automatic
interpolation between domains already, we don't need a special
`vertex_normal` attribute for this case, we can just let the
generalized interpolation do the hard work where necessary,
simplifying the set of built-in attributes to only include the
`normal` attribute from faces.
The fact that vertex normals are just a cache also raised another
issue, because the cache could be dirty, so mutex locks were
necessary to calculate normals. That isn't necessarily a problem,
but it's nice to avoid where possible.
Another downside of the current attribute naming is that after the
point distribute node there would be two normal attributes.
This commit reverts the `vertex_normal` attribute so that
it can be replaced by the implementation in D10677.
Differential Revision: https://developer.blender.org/D10676
The Attribute Convert node provides functionality to change attributes
between different domains and data types. Before it was impossible to
write to a UV Map attribute with the attribute math nodes since they
did not output a 2D vector type. This makes it possible to
"convert into" a UV map attribute.
The data type conversion uses the implicit conversions provided by
`\nodes\intern\node_tree_multi_function.cc`.
The `Auto` domain mode chooses the domain based on the following rules:
1. If the result attribute already exists, use that domain.
2. If the result attribute doesn't exist, use the source attribute domain.
3. Otherwise use the default domain (points).
See {T85700}
Differential Revision: https://developer.blender.org/D10624
The result value should be true if the input values are not zero.
Note that there is ongoing conversation about these conversions
in D10685. This is simply a fix though.
This operator initializes mask values for the entire mesh. It supports
different modes for initializing those values, and more will be added in
the future.
The initial version supports generating a random mask per vertex, Face
Sets or loose parts. These masks are useful for introducing variations
in the model using the filters (both shapes and colors).
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10679
Before only it was only possible interpolate frames of `Keyframe` type. Now all types except `Breakdown` can be used.
`Breakdown` cannot be used because it would be impossible interpolate two times because the extremes of the interpolation would change and the clean operator would not work.
There is no reason to hide the 'Scale' and 'Scale Randomness' options
for fluid particles that are rendered as 'Object'.
It is possible that hiding these options was just an oversight and
not intentional.
Add new function `blo_bhead_is_id_valid_type()` to correctly check the
blend file block type.
File block type codes have four bytes, and two of those are only in use
when these blocks contain ID datablocks (like `"OB\0\0"`). However,
there are other types defined in `BLO_blend_defs.h` that have four
bytes, like `TEST`, `ENDB`, etc.
The function `BKE_idtype_idcode_is_valid(short idcode)` was used to
check for ID datablocks while reading a blend file. This only takes a
2-byte parameter, and thus its result is invalid for the 4-byte codes.
For `TEST` blocks, it would actually consider it a `TE` block, which is
a valid identifier for a Texture. This caused the heap buffer overflow,
as the datablock is not a valid ID, and thus the bytes that were
expected to form an ID name actually encode something completely
different.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D10703
Sculpt undo relied on having a mode-changing undo step to properly
apply changes.
However this isn't the case with startup files or when mixing
global undo steps with sculpt (see T82851, also fixed).
Undo stepping logic follows image_undosys_step_decode_undo.
This is basically done by ignoring override operations from old override
affecting ID pointer properties, when the new (destination) one is not
NULL.
Fix T86501: New object added to overridden collection doesn't show up in linking file on Resync.
This is more of a work-around actually, since there is no real way to
fix the issue in a fully automated and consistent way, it is caused by
older blender files being saved with 'broken' overrides.
WARNING: This cannot ensure that some purposedly edited/overridden ID
pointer properties won't be lost in the process.
Code would end up freeing some of the newly created overrides, which
were assigned to the matching linked ID's `newid` pointer, accessed
again further down the code.
Note that this is not a normal expected situation, and it won't give a
proper resync result anyway, but it might happen in some complicated
corner cases, and also quite often when dealing with older .blend files.
In some cases (advanced, low-level), we also want to remap pointers like
`ID.newid` or `ID.orig_id`.
Only known case currently is `id_delete`, to avoid leaving potential access to freed memory. See next commit and T86501.
Baking to Vertex Colors would always bake to sculpt vertex colors (if
such a layer is present) even if those are not enabled in the
experimental preferences. This would bake without an error but leave the
user without a result to look in the viewport.
Now check if sculpt vertex colors are enabled and only bake to them in
that case.
Maniphest Tasks: T86455
Differential Revision: https://developer.blender.org/D10692
- Add notes on portability.
- Use encoding argument for all file IO.
- Use integer math to calculate major/minor version, while float
division should be fine prefer matching Blender.
This type, CacheLookupResult, holds the data for the current time, or an
explanation as to why no data is available (already loaded, or simply
nothing available). This is useful to document the behavior of the code
but also, in future changes, to respond appropriately for missing data.
Inside of the procedural, instances are AlembicObjects which point to
the AlembicObject that they instance.
In Alembic, an instance is an untyped Object pointing to the original
(instanced) one through its source path. During the archive traversal we
detect such instances and, only if the instanced object is asked to be
rendered, set the instance's AlembicObject to point to the original's
AlembicObject.
Cycles Object Nodes are created for each AlembicObject, but only for
non-instances are Geometries created, which are then shared between
Object Nodes. It is supposed, and expected, that all instances share the
same shaders, which will be set to be the ones found on the original
object.
As for caching, the data cache for an AlembicObject is only valid for
non-instances and should not be read to or from as it is implicitly
shared.
This will help support instancing as cache building is now decoupled
from the logic to update the Nodes' sockets as data (and cache) will
need to be shared by different Geometries somehow, and also simplify
implementing different data caching methods by centralizing this
operation.
We need to explicitely tag the Attribute and AttributeSet as modified if
we change or add/remove data. This is more of a bandaid until attributes
handling is refactored to be able to reuse routines from the Attribute
API.
This patch adds a node, that removes an attribute if possible,
otherwise it adds an error message.
Differential Revision: https://developer.blender.org/D10697
This patch fixes a visual bug related to connecting an output socket to
a Multi-Input Socket, that already has a link to that same output.
In this case, the drag link got a new index and snapped to a new
position. This path makes the drag link snap to the same position as the
first link between the two sockets.
Differential Revision: https://developer.blender.org/D10689
Caused by 46aa70cb48.
RNA would send property update notifiers with the owner ID as `reference` data.
Since above's commit we'd only send the notifiers to editors if the reference
data address matches the space's address. So editors wouldn't get the notifiers
at all.
The owner ID for space properties is always the screen AFAIK. So allow
notifiers with the screen as reference to be passed to editors as well, think
this is reasonable to do either way.
For example, steps to reproduce were:
* Open Asset Browser
* Mark some data-blocks of different types as assets (e.g. object & its
material)
* Switch between the categories in the Asset Browser. The asset list wouldn't
be updated.
When adding a notifier, `reference` data can be passed. The notifier system
uses this to filter out listeners, for example if data of a scene changes,
windows showing a different scene won't get the notifiers sent to their
listeners.
For the `NC_SPACE` notifiers, a number of places also passed the space as
`reference`, but that wasn't used at all. The notifier would still be sent to
all listeners in all windows (and the listeners didn't use it either). Causing
some unnecessary updates (e.g. see ed2c4825d3).
With this commit, passing a space will make sure the notifier is only sent to
that exact space. Some code seems to already have expected that to be the case.
However there were some cases that passed the space as `reference` without
reason, which would break with this commit (meaning they wouldn't redraw or
update correctly).
Corrected these so they don't pass the space anymore.
Steps to reproduce were:
* Open an Asset Browser
* "Mark Asset" on some data-block
* Change the Asset Browser into a different editor (not File Browser!)
* "Clear Asset" on the data-block again, or mark another asset
* Change back to the Asset Browser, it will show an outdated list
Now the file-browser reloads local file data after spaces were changed. Note
that the current notifier code doesn't limit the space-change notifiers to the
affected spaces, so changing any visible space will trigger this. That's an
issue to be fixed separately.
The check for undo-depth increment/decrement assumed a newly loaded
window manager would have a different pointer.
This broke bl_animation_fcurves test indirectly,
the change to undo-depth caused the redo panel to attempt to popup
in background mode - which isn't supported.
Now the pointer is unchanged, the undo-depth is assumed to match
the value used when calling the operator.
The undo-depth is now properly maintained between file loads,
which is an improvement on the original behavior which reset it.
Keep the pointer location from the initial window-manager
between file load operations.
This is needed as the Python API may hold references to keymaps for e.g.
which are transferred to the newly loaded window manager,
without their `PointerRNA.owner_id` fields being updated.
Since there is only ever one window manager, keep the memory at the same location so the Python ID pointers stay valid.
Reviewed By: mont29
Ref D10690
Previously many operations would run on file load, even if the file
did not load. Pre/post load handlers were called, timers canceled,
all undo data freed, editors exited ... etc.
Now keep the blend file in it's current state.
This simplifies updating this area of code as there is one less
possible situation to account for.
Currently file loading performs almost all reloading logic
even in the case loading the file fails, causing the file to be in
a state that isn't well defined: undo is cleared, timers are canceled &
scripts are re-registered.
- Don't set G.relbase_valid until the file is loaded.
- Remove unnecessary string pointer comparison.
- Remove unused filename being passed to 'setup_app_data'.
`BKE_lib_override_library_main_resync` uses
`LIB_TAG_LIB_OVERRIDE_NEED_RESYNC` tags set by RNA override apply code,
and perform detection for the remaining cases (those were new overrides
need to be created for data that was not present before in the library).
And then it actually resync all needed local overrides.
Part of T83811 & D10649.
We can fairly easily detect some resync-needed cases when applying the
overrides operations on a Pointer RNA property.
This should cover all cases where an existing override's ID pointer is
changed in its linked data.
We still have to add code to detect when a not-yet-overridden linked ID
needs to become overridden (because its relations to other data-blocks
changed in a way that requires it).
Part of T83811 & D10649.
This patch changes the `MEM_DEVICE_ONLY` type to only allocate on the device and fail if
that is not possible anymore because out-of-memory (since OptiX acceleration structures may
not be allocated in host memory). It also fixes high peak memory usage during OptiX
acceleration structure building.
Reviewed By: brecht
Maniphest Tasks: T85985
Differential Revision: https://developer.blender.org/D10535
Rather than letting the `TreeElementAnimData` constructor take an ID from which
we get the animation-data based on an assumption on how it's stored, let the
constructor take the animation-data directly. That way we further centralize
the assumptions on the data passed to the element creation to
`tree_element_create()`.
The following commit will add a comment explaining the plan to entirely get rid
of those assumptions in the future.
There was an implicit assumption that tree element types using the new code
design set their name on creation. Use an assert to make this explicit. See
f59ff9e03a, which was an error because of this broken assumption.
Caused by 2e221de4ce in combination with 4292bb060d.
In the former I forgot to set the name for NLA actions in the new code design,
in the latter I made it an assumtion that tree element types using the new
design set the name.
The following commit will make this assumption explicit with an assert.
When loading a file with an asset browser open, and it showed a custom asset
library that can't be found currently (e.g. because the file is from somebody
else), the `BLI_assert(0)` in `rna_FileAssetSelectParams_asset_library_get()`
would fail.
There was code to handle this case already, but unlike I thought it didn't run
right after file read. Now it does.
The multi-input-socket cannot be connected to the same socket twice currently.
However, it is still possible to achieve this using an intermediate reroute node.
In this case the origin socket should be listed twice in the `linked_sockets_` list.
Higher level functions can still deduplicate the list of they want.
This commit adds an operator to the RMB-menu "Copy Full Data Path“,
to copy the full RNA path to the clipboard. It aims to complement
"Copy Data Path“, which only copies the part of the path that is needed
for drivers, but for writing addons, etc. it is useful to have an option that
gives the full data path.
Similar patch have been submitted before, see D763 and D2746
This time I did not split the operator (as D2746) and does not contain the UI reorganization (as D763)
Note, the fixes from D2746 were committed in rB09eac0159db8 so that patch can be closed.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D10539
This makes the hit delta threshold dependant on the ray angle.
If the ray is more aligned with the view, its intersection
threshold gets bigger to avoid going through geometry.
This improves reflections and fix T86448 refraction issue.
We now have a new buffer to output reflection depth. This buffer is
only usefull for non planar SSR but we use it to tag the planar rays.
This also touch the raytrace algo for planars to avoid degenerate
lines on vert sharp reflections.
This changes the sampling routine to use the method described in
"A Simpler and Exact Sampling Routine for the GGXDistribution of Visible Normals"
by Eric Heitz.
http://jcgt.org/published/0007/04/01/slides.pdf
This avoids generating bad rays and thus improve noise level in screen-
space reflections / refraction.
This changes the hitBuffer to store `ReflectionDir * HitTime, invPdf`
just as the reference presentation.
This avoids issues when the hit refinement produce a coordinate that
does not land on the correct surface.
We now store the pdf in the same texture and store it inversed so we can
remove some ALU from the resolve shader.
This also rewrite the resolve shader to not be vectorized to improve
readability and scalability.
Since rBb279fef85d1a, the nodes properties for geometry nodes using a
texture are displayed in the Properties Editor.
It was possible to create recursive nodetrees when choosing the 'root'
nodegroup in the node link menu though leading to a crash.
Now poll if a group node of a particular node could actually be added to
the current tree.
Also check if the tree types actually match.
Maniphest Tasks: T86416
Differential Revision: https://developer.blender.org/D10671
This way we get a choice when we click on node links in the Properties
Editor.
This also changes some of the more permissive poll functions on some
nodes back to being "shading-only" (these were made permissive in
rBb78f2675d7e5 for simulation nodes, but have not found their way into
geometry nodes yet).
ref b279fef85d / T86416 / D10671
Maniphest Tasks: T86416
Differential Revision: https://developer.blender.org/D10673
The Blender/Cycles XYZ color space has a D65 white point instead of E, and
this was not correctly accounted for both in the OpenColor config reading code
and the bundled config.
This meant that since the OpenColorIO v2 upgrade, the Linear ACES color space
was not working correctly, and other OpenColorIO configs defining
aces_interchange were not interpreted correctly.
This conversion works the same way as a combination of the existing
color to float3 to boolean conversions, so the boolean result will be
false if the color is black, otherwise true, and the alpha is ignored.
This Patch removes the auto sorting from Multi-Input Sockets and allows
the links to be sorted by drag and drop instead.
As a minor related change, it fixes the drawing of the mute line to
connect to the first input instead of the socket's center.
This implements the MVP for the new spreadsheet editor (T85879). The functionality
is still very limited, but it proved to be useful already. A more complete picture
of where we want to go with the new editor can be found in T86279.
Supported features:
* Show point attributes of evaluated meshes (no original data, no other domains,
no other geometry types, yet). Since only meshes are supported right now, the
output of the Point Distribute is not shown, because it is a point cloud.
* Only show data for selected vertices when the mesh is in edit mode.
Different parts of Blender keep track of selection state and original-indices with
varying degrees of success. Therefore, when the selected-only filter is used, the
result might be a bit confusing when using some modifiers or nodes. This will
be improved in the future.
* All data is readonly. Since only evaluated data is displayed currently, it has to
be readonly. However, this is not an inherent limitation of the spreadsheet editor.
In the future editable data will be displayed as well.
Some boilerplate code for the new editor has been committed before in
rB9cb5f0a2282a7a84f7f8636b43a32bdc04b51cd5.
It would be good to let the spreadsheet editor mature for a couple of weeks as part
of the geometry nodes project. Then other modules are invited to show their own data
in the new editor!
Differential Revision: https://developer.blender.org/D10566
Note, this does not allow users to connect the same socket more than once to
a multi-input-socket in the UI. However, the situation could still happen when
using node muting.
Properties Editor
Since rBb279fef85d1a, the nodes properties for geometry nodes using a
texture are displayed in the Properties Editor.
rB85421c4fab02 added an attribute search button, but this was missing
still (gave just the regular text button) if this was displayed in the
Properties Editor.
ref b279fef85d / T86416 / D10671 / D10673
Maniphest Tasks: T86416
Differential Revision: https://developer.blender.org/D10674
Using EEVEE (as well as some other actions like saving the file or
tweaking mesh parameters) can cause a PBVH rebuild. The different sculpt
tools can store PBVH nodes or other related data in their caches, so
this data becomes invalid if the PBVH rebuilds during evaluation. This
ensures that the PBVH does not rebuild while the cache of Expand is
being used, like it already happens for brushes and filters.
Reviewed By: JacquesLucke
Maniphest Tasks: T86422
Differential Revision: https://developer.blender.org/D10675
Adds toggle to graph editor (View->Show Extrapolation). When disabled,
then fcurves only draw over the keyframe range. For baked fcurves and
ghost fcurves, the range is all sampled points.
It is intended for frequent use so anybody could assign hotkey or add
to quick favorites that's why GE-View is the best place for it.
Show Extrapolation is the default.
Reviewed By: sybren, Stan1, looch
Differential Revision: http://developer.blender.org/D10442
No functional changes.
This function replaces some of the logic in
`DRW_select_buffer_find_nearest_to_point` that traverses a buffer in a
spiral way to search for a closer pixel (not the closest).
Differential Revision: https://developer.blender.org/D10548
This commit adds interpolation to and from attribute on the polygon
domain. Interpolation is done automatically when a node uses attributes
on two different domains. The following are the new interpolations and
corresponding simple test cases:
- **Point to Polygon**: Painting the shade smooth attribute in weight
paint mode
- **Polygon to Point**: Moving points along a normal based on the
material index
- **Polygon to Corner**: Scaling a UV map with the material index
before sampling a texture
{F9881516}
This is also necessary for an improved implementation of the `normal`
attribute.
Differential Revision: https://developer.blender.org/D10393
This adds an extra option to the Face Sets Init operator to initialize
individual Face Sets based on the current Face Sets boundaries.
In particular, this is useful for splitting the patterns created by
Expand into individual Face Sets for further editing.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10608
Document the fact that `bpy.types.KeyMaps.new()` will not create a new
keymap but instead return an existing one, if one with the given
name/space/region already exists.
No functional changes.
This patch exposes the "Shade Smooth" value as a boolean attribute.
This setting is exposed as a check-box in the mesh data properties,
but the value is actually stored for every face, allowing some faces
to be shaded smooth with a simple per-face control.
One bonus, this allows at least a workaround to the lack of control
of whether meshes created by nodes are shaded smooth or not: just use
an attribute fill node.
Differential Revision: https://developer.blender.org/D10538
Auto frees cryptomatte session when it the pointer is collected from the
stack.
Reviewed By: Jacques Lucke
Differential Revision: https://developer.blender.org/D10667
Use member initializer list for constructor.
Use `this->` for member function.
Introduced in rBef53859d24a9720882e3ca6c5415faefec6fb82c
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D10653
Prior to rB99a7c917eab7, Shift + D was used to set detail size for both
constant and relative detail (using radial control). The commit added an
improved operator for doing this for constant detail (showing the
triangle grid representation), but left the user without a shortcut to
do this for relative detail.
Interestingly rB99a7c917eab7 only changed this for the Blender keymap,
the Industy Compatible keymap still has the "old" entry.
This patch changes both keymaps to have both entries.
For user experience, the real change here is to have both available on
one 'primary' shortcut (Shift+D), the improved
'dyntopo_detail_size_edit' operator will now act on all possible cases.
If it deals with constant detail, it acts as before, if it deals with
relative detail etc, it will fallback to the "old" way of doing it via
radial control instead. I assume this adresses what was stated in
rB99a7c917eab7: "Deciding if both detail sizes can be unified needs a
separate discussion"
Also, move dyntopo_detail_size_edit to sculpt_detail.c
Fixes T83828
Maniphest Tasks: T83828
Differential Revision: https://developer.blender.org/D9871
A few changes to make this consistent with other modifier panels:
- Title case for UI labels
- Use property split (and therefore decorators)
- Declare sublayout variables after getting modifier info
This was meant to be part of rB9ce950daabbf, but the change dropped from
the set at some point in the process of updating and committing.
Sorry for the noise.
In {rBb279fef85d1a} the button that displays a texture in a Properties
Editor texture tab was added for geometry nodes.
Same commit will actually show them for Brush textures as well (but
disabled -- because the Texture users dont match).
This task is for finanlizing proper support for Brush textures as well.
There was originally a separate patch for this (see {D9813}) but most of
it was already implemented by above commit.
**what this solves**
from the default startup file:
- go to any sculpt or paint mode and add a texture to your brush
- observe the button to edit this texture in the Properties editor is
greyed out
{F9860470}
There are two possible solutions:
- [1] call the texture template for the brush `texture_slot` texture
(instead of the brush 'texture') from the python UI code, this is then
working in harmony how ButsTextureUser works for brushes
- [2] tweak the way `ButsTextureUser` works (dont rely on
`RNA_BrushTextureSlot` there)
This patch implements the first solution.
Since `brush.texture_slot` is `br->mtex` RNA wrapped and `brush.texture`
is `br->mtex.tex` RNA wrapped, this really comes down to doing the same
thing. I checked that creating a new texture and unlinking/deleting will
have the same results even though they take slightly different code
paths: assignment and NULLing the pointers are working on the same (see
above) and RNA update callbacks also do the same [even though in
different functions]:
- brush.texture will do rna_Brush_main_tex_update
- brush.texture_slot.texture will do rna_TextureSlotTexture_update /
rna_TextureSlot_update
(only difference here is an additional DEG relations update in the case
of texture_slot which should not do harm)
Differential Revision: https://developer.blender.org/D10626
This makes the following changes to the name of the two
geometry nodes subvision nodes:
- `Subdivision Surface` -> `Subdivide Smooth`
- `Subdivision Surface Simple` -> `Subdivide`
Most of the benefit is that the names are shorter, but it also better
mirrors the naming of operations in edit mode, and phrases the names
more like actions. This was discussed with the geometry nodes team.
When you have many distinct objects, in an Eevee render then the shadow caster gets exponentially slower as the number of (distinct) objects increase.
This is because of the way that frontbuffer->bbox (EEVEE_BoundBox array) and the associated frontbuffer->update bitmap are resized.
Currently the resizing is done by reserving space for SH_CASTER_ALLOC_CHUNK (32) objects at a time.
When the number of objects is large, then the MEM_reallocN() gets progressively slower because it must memcpy the entire bbox/bitmap data to the new memory chunk.
And there will be a lot of *memcpy* operations for a large scene.
(Obviously there are a significant number of memory allocations/deallocations too - though this would be linear performance.)
I've switched to doubling the frontbuffer->alloc_count (buffer capacity) instead of adding SH_CASTER_ALLOC_CHUNK (32). As I understand this is the only way to eliminate exponential slowdown. Just increasing the size of SH_CASTER_ALLOC_CHUNK would still result in exponential slowdown eventually.
In other changes, the "+ 1" in this expression is not necessary.
if (id + 1 >= frontbuffer->alloc_count)
The buffer is 0-based. So when the buffer is initially allocated then id values from bbox[0] to bbox[31] are valid. Hence when frontbuffer->count == frontbuffer->alloc_count, is when the resizing should be triggered.
As it stands the "+ 1" results in resizing the buffer, when there is still capacity for one more object in the buffer.
I've changed the initial buffer allocation to use MEM_mallocN() instead of MEM_callocN(). The difference is that malloc() doesn't memset buffer (with zeros) when allocated. I've checked the code where new bbox records are created, and it does not rely on the buffer being initialised with zeros.
Anyway, isn't calloc() safer than using malloc()? Well no, it's actually the opposite in this case. Every time the buffer size is increased, it is done using realloc(), and this does not zero-out the uniniitialised portion of the buffer. So the code would break if it was modified to assume that the buffer contains zeros. Hence I believe initialising the buffer using calloc() could be misleading to a new developer.
Won't this result in increased memory usage? Yes, if you have millions of objects in your scene, then you are potentially using up-to twice the memory for the shadow caster. (However if you have millions of objects in your scene you're probably finding the Eevee render times a slow.)
Note that once the render gets going the frontbuffer bbox/bitmap will be shrunk to a multiple of SH_CASTER_ALLOC_CHUNK (32), therefore releasing the overallocation of memory.
As observed in Visual Studio - this appears to be prior to peak memory usage anyway.
Note this shrinking is executed in EEVEE_shadows_update() - during the first render sample pass. If necessary you could consider shrinking the buffer immediately after the EEVEE_shadows_caster_register() has done it's work. (Note however it appears you would need to add that function call is multiple places.)
Anyway as per the bug report I raised, I observed a 5% increase in peak-memory. And I'm unclear whether this difference in memory is due to me running the debug build. (It could be that there is no difference because of the shrinking.)
I couldn't figure out how the shadow caster backbuffer works. I see that EEVEE_shadows_init() has an explicit command to swap the front/back buffers. However this is done only when the buffers are first initialised and there is nothing in there yet. In my testing, the backbuffer->count was always zero, EEVEE_shadows_update() never did anything with the backbuffer.
Finally this problem is most evident when using Geometry Nodes or a Particle System to instantiate many objects. Objects created through say the array modifier do not cause any issues because it is considered one object by the shadow caster.
Reviewed By: #eevee_viewport, fclem
Differential Revision: https://developer.blender.org/D10631
This commit refactors the point distribute node to skip realizing
the instances created by the point instance node or the collection
and object info nodes. Realizing instances is not necessary here
because it copies all the mesh data and and interpolates all
attributes from the instances when this operation does not
need to modify the input geometry at all.
In the tree leaves test file this patch improves the performance of
the node by about 14%. That's not very much, the gain is likely larger
for more complicated input instances with more attributes (especially
attributes on different domains, where interpolation would be necessary
to join all of the instances). Another possible performance improvement
would be to parallelize the code in this node where possible.
The point distribution code unfortunately gets quite a bit more
complicated because it has to handle the complexity of having many
inputs instead of just one.
Note that this commit changes the randomness of the distribution
in some cases, as if the seed input had changed.
Differential Revision: https://developer.blender.org/D10596
Splits up `tree_element_id.cc`/`tree_element_id.hh`.
If we move all ID types into this one file, it will become rather big. Smaller
files are probably easier to work with. We could still keep small classes like
`TreeElementIDLibrary` in the general file, don't mind really, but this creates
separate files for that too.
These files can contain more than just the "base" tree element types. E.g. the
class for the view-layer base element can also contain the class for the
view-layer elements. Otherwise we'd end up with like >50 files for the
individual types, most of them very small.
So just give the files a general name and put the related classes in there.
Continuation of work in 2e221de4ce, 249e4df110 and 3a907e7425.
Adds new tree-element classes for the scene-ID, scene collections, scene
objects, and the view layers base.
There is some more temporary stuff in here, which can be removed once we're
further along with the porting. Noted that in comments.
This is a Python version of the existing `make_source_archive.sh`
script. IMO it's easier to read, and it'll also be easier to extend with
the necessary functionality for D10598.
The number of lines of code is larger than `make_source_archive.sh`, but
it has considerably less invocations of `awk` ;-) And also the filtering
is integrated, instead of forking out to Python to prevent certain files
to be included in the tarball.
Reviewed By: dfelinto, campbellbarton
Differential Revision: https://developer.blender.org/D10629
Currently the implementations specific to each geometry type are in
the same file. This makes it difficult to tell which code is generic
for all component types and which is specific to a certain type.
The two files, `attribute_access.cc`, and `geometry_set.cc` are
also getting quite long.
This commit splits up the implementation for every geometry component,
and adds an internal header file for the common parts of the attribute
access code. This was discussed with Jacques Lucke.
The actual sample count is rounded up to a multiple of 4 because we
sample 4 horizons directions.
Changing this setting forces the shader to recompile (because using a
GPU_constant).
This just bypass the occlusion computation if there is no occlusion
data. This avoids weird looking occlusion due to the screen space
geometric normal reconstruction.
The sampling is now optimum with every samples being at least one pixel
appart. Also use a squared repartition to improve the sampling near the
center.
This also removes the thickness heuristic since it seems to remove
a lot of details and bias the AO too much.
This is a major rewrite that improves the screen space raytracing
a little bit.
This also decouple ray preparation from raytracing to be reuse in other
part of the code.
This changes a few things:
- Reflections have lower grazing angle failure
- Reflections have less self intersection issues
- Contact shadows are now fully opaque (faster)
Unrelated but some self intersection / incorrect bad rays are caused by
the ray reconstruction technique used by the SSR. This is not fixed by
this commit but I added a TODO.
This removes the need for per mipmap scalling factor and trilinear interpolation
issues. We pad the texture so that all mipmaps have pixels in the next mip.
This simplifies the downsampling shader too.
This also change the SSR radiance buffer as well in the same fashion.
This was reported as opening alembic caches ignoring the
'use_relative_paths' preference, but this operator just did not have
this setting. Fortunately, adding this is just a simple switch.
Maniphest Tasks: T86063
Differential Revision: https://developer.blender.org/D10568
This adds the initial boilerplate code that is required to introduce
the new spreadsheet editor. The editor is still hidden from the ui.
It can be made visible by undoing the change in `rna_screen.c`.
This patch does not contain any business logic for the spreadsheet editor.
Differential Revision: https://developer.blender.org/D10645
Ref T86279.
Add operator `FILE_OT_view_selected` to the file browser (and thus also
to the asset browser) that scrolls selected files into view.
This includes the active file, even though it is not selected. In
certain cases the active file can loose its selected state (clicking
next to it, or refreshing the asset browser), but then it's still shown
in the right-hand sidebar. Because of this, I found it important to take
it into account when scrolling.
This also includes a change to the keymaps:
- Blender default: {key NUMPAD_PERIOD} is removed from the "reload"
operator, and assigned to the new "view selected files" operator. The
reload operator was already doubly bound, and now {key R} is the only
remaining hotkey for it.
- Industry compatible: {key F} is assigned to the new "view selected
files" operator. This is consistent with the other "view selected"
operators in other editors.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D10583
The Tool stores desired dimensions as `scale` and thus had to half the
scale again in `make_prim_init()` because by default all primitives are
created at a size of 2 in blender.
This worked, but:
- [1] it logged something like size=2, scale=2,2,2 for a 2x2x2 cube
[which does not sound right, it should be size=2 scale=1,1,1]
- [2] it had to make an exception for the case scale is exactly 1x1x1
[this happens when the property is not set specifically, e.g. adding
primitives from the menu]
-- this exception led to double sized primitives being created when the
tool asked for exact dimensions of 1x1x1
Now - instead of compensating in `make_prim_init()` - do this earlier in
the tool itself, see `view3d_interactive_add_modal`, this fixes the bug
and now also correctly logs size=2 scale 0.5,0.5,0.5 for a 1x1x1 cube.
Maniphest Tasks: T86347
Differential Revision: https://developer.blender.org/D10632
projectors
Make this clear in property UI descriptions and deactivate aspect &
scale fields if no camera projectors are present.
ref T86268
Maniphest Tasks: T86268
Differential Revision: https://developer.blender.org/D10634
This adds support for creating a `BlendFile` (internally called `Main`),
which is limited to a context.
Temporary data can now be created which can then use
`.libraries.load()` the same as with `bpy.data`.
To prevent errors caused by mixing the temporary ID's with data in
`bpy.data` they are tagged as temporary so they can't be assigned
to properties, however they can be passed as arguments to functions.
Reviewed By: mont29, sybren
Ref D10612
The handle of a drawing callback can be removed within the drawing function itself.
This causes `var = (type)(((Link *)(var))->next` to read an invalid memory value in C.
Something in this update broke the floor() function in CUDA, instead use
floorf() like we do everywhere else in the kernel code. Thanks to Ray
Molenkamp for identifying the solution.
It looks like we never generated correct icon previews for images with
float_rects (non-8bit-images). Images from the report were 16bit pngs.
In this case, `icon_preview_startjob` would return early (it only
checked if the ImBuf `rect` was NULL -- which is the case if it has a
`rect_float` instead). This is not neccessary since `icon_copy_rect` is
perfectly capable of taking float rects.
Now correct the check and only return early if both `rect` & `rect_float`
are NULL.
note: this will not refresh icon previews from existing files
automatically. For this, use File > Data Previews > Clear Data-Block
Previews.
Maniphest Tasks: T86210
Differential Revision: https://developer.blender.org/D10601
Caused by {rB85421c4fab02}.
Above commit treated `SOCK_RGBA` and `SOCK_STRING` the same in
`std_node_socket_draw`.
That would turn a RGBA button into a text button (for attribute search),
leading to trouble.
Note these were just treated the same prior to above commit because both
were doing the layout split.
Now just give RGBA sockets their own case.
Maniphest Tasks: T86373
Differential Revision: https://developer.blender.org/D10646
This reverts commit 7a34bd7c28.
Broke windows build. Can apparently fix with /Zc:preprocessor flag
for windows but need a Windows dev to make that fix.
Since {rB7a6b46aac56b}, particle systems were named "ParticleSettings"
by default, same as particle settings themselves. These are not the same
thing and their names should reflect that.
Issue came up in T86366.
Now name them "ParticleSystem" by default, name uniqueness is preserved
for both system and settings.
Maniphest Tasks: T86366
Differential Revision: https://developer.blender.org/D10641
But this time the root cause. Writing undo files is done in a separate
thread. This patch moved the updating of the matte_id when the user
actually changes the matte.
The commit rB6f63417b500d that made exact boolean work on meshes
with holes (like Suzanne) unfortunately dramatically slowed things
down on other non-manifold meshes that don't have holes and didn't
need the per-triangle insideness test.
This adds a hole_tolerant parameter, false by default, that the user
can enable to get good results on non-manifold meshes with holes.
Using false for this parameter speeds up the time from 90 seconds
to 10 seconds on an example with 1.2M triangles.
The missing update has two sources:
The TimeSampling used for looking up transformations in the cache was
uninitialized. To fix this, simply use the TimeSampling from the last
transformation in the hierarchy (that is the object's parent), which
should also contain the time information for all of its parents.
The objects are not tagged for update when their trasformations change.
The Exact boolean used in the cell fracture addon incorrectly
kept some outside faces: due to some raycasts going into open
eye socket then out of the head, leading to one ray direction
(out of 8) saying the face was inside the head. The current
code allowed 1 of 8 rays only as "inside" to accommodate the
case of a plane used in boolean to bisect. But this cell fracture
case needs more confidence of being inside. So changed the
test for intersection to require at least 3 of 8 rays to be inside.
Maybe the number of rays to indicate insideness should be exposed
as an option, to allow user tuning according to the degree of
"non-volumeness" of the arguments, but will try at least for now
to magically guess the right value of the rays-inside threshold.
Note: all of this only for the case where the arguments are not
all PWN (approx: manifold). The all-PWN case doesn't use raycast.
Instead of returning a raw pointer, `LinearAllocator.construct(...)` now returns
a `destruct_ptr`, which is similar to `unique_ptr`, but does not deallocate
the memory and only calls the destructor instead.
The main change is that large allocations are done separately now.
Also, buffers that small allocations are packed into, have a maximum
size now. Using larger buffers does not really provider performance
benefits, but increases wasted memory.
This is a complete rewrite of the derived node tree data structure.
It is a much thinner abstraction about `NodeTreeRef` than before.
This gives the user of the derived node tree more control and allows
for greater introspection capabilities (e.g. before muted nodes were
completely abstracted away; this was convenient, but came with
limitations).
Another nice benefit of the new structure is that it is much cheaper
to build, because it does not inline all nodes and sockets in nested
node groups.
Differential Revision: https://developer.blender.org/D10620
This attribute exposes mesh vertex normals as a `vertex_normal`
attribute for use with nodes. Since the normal vector stored in
vertices is only a cache of data computable from the surrounding faces,
the attribute is read-only. A proper error message for attempting to
write this attribute is part of T85749. A write-only normal attribute
will likely come later, most likely called `corner_normal`.
The normals are recomputed before reading if they are marked dirty.
This involves const write-access to the mesh, protected by the mutex
stored in `Mesh_Runtime`. This is essential for correct behavior after
nodes like "Edge Split" or nodes that adjust the position attribute.
Ref T84297, T85880, T86206
Differential Revision: https://developer.blender.org/D10541
Because the search didn't run when the menu first opens, the attributes
appeared in a different order than after you typed anything into the
search field. This commit instead runs the search when the menu
is first opened, but it only sorts items without filtering.
Continuation of work in 2e221de4ce and 249e4df110 .
This prepares things so we can start porting the individual ID types to
the new code design. I already added some code for library IDs, because
they need some special handling during construction, which I didn't want
to break.
The `AbstractTreeElement::isExpandValid()` check can be removed once
types were ported and can be assumed to have a proper `expand()`
implemenation.
Also makes `TreeElementGPencilLayer` `final` which I forgot in
e0442a955b.
Mistake in aa3a4973a3. The expanded `ELEM()` check would include
`0 && te->idcode != 0`, which always evaluates to `false`/`0`. That
wouldn't cause the asset to fail, but the `te->idcode` part would never
be checked.
Fixed the error and cleaned up the check against "0" with a check
against `TSE_SOME_ID`, see b9e54566e3.
Code to check if the Outliner tree-element type was the general ID one
would always check against "0" (explicity or even implicitly). For
somebody unfamiliar with the code this is very confusing. Instead the
value should be given a name, e.g. through an enum.
Adds `TSE_SOME_ID` as the "default" ID tree-element type. Other types
may still represent IDs, as I explained in a comment at the definition.
There may also still be cases where the type is checked against "0". I
noted in the comment that such cases should be cleaned up if found.
Add `BKE_pose_apply_action(object, action, anim_eval_context)` function
and expose in RNA as `Pose.apply_action(action, evaluation_time)`.
This makes it possible to do the following:
- Have a rig in pose mode.
- Select a subset of the bones.
- Have some Action loaded that contains the pose you want to apply.
- Run `C.object.pose.apply_pose_from_action(D.actions['PoseName'])`
- The selected bones are now posed as determined by the Action.
Just like Blender's current pose library, having no bones selected acts
the same as having all bones selected.
Manifest Task: T86159
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D10578
Add an RNA function `activate_asset_by_id(asset_id: ID, deferred: bool)`
to the File Browser space type, which intended to be used to activate an
asset's entry as identified by its `ID *`. Calling it changes the active
asset, but only if the given ID can actually be found.
The activation can be deferred (by passing `deferred=True`) until the
next refresh operation has finished. This is necessary when an asset has
just been added, as it will be loaded by the filebrowser in a background
job.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D10549
Is based on Google style which was used in the Libmv project before,
but is now consistently applied for the sources of the library itself
and to C-API. With some time C-API will likely be removed, and it
makes it easier to make it follow Libmv style, hence the diversion
from Blender's style.
There are quite some exceptions (clang-format off) in the code around
Eigen matrix initialization. It is rather annoying, and there could be
some neat way to make initialization readable without such exception.
Could be some places where loss of readability in matrix initialization
got lost as the change is quite big. If this has happened it is easier
to address readability once actually working on the code.
This change allowed to spot some missing header guards, so that's nice.
Doing it in bundled version, as the upstream library needs to have some
of the recent development ported over from bundle to upstream.
There should be no functional changes.
Continuation of work in 2e221de4ce and 249e4df110. Now the tree-element
types have to be ported one by one. This is probably the most straight forward
type to port.
scenarios
In general, I could not find a reason executing from the python console
should not do an Undo push. Running a script from the Text Editor does
this as well and this seems generally useful.
Without an Undo push, one can easily run into situations were IDs have
been added or removed and undo on would then cause trouble (e.g. first
selection then bpy.ops.object.duplicate() -- this crashed as reported in
T86293 -- duplicate does not get its own undo push because it is not the
last op in the list, wm->op_undo_depth is not zero). This has changed
with the Undo refactor, so in essence the root cause is the same as
T77557, Legacy Undo does not suffer from the crash (but misses
the generally useful undo push from the console still)
Now add Undo to CONSOLE_OT_execute bl_options ('UNDO_GROUPED' seems more
appropriate than plain 'UNDO' since pasting multiple lines of code will
call CONSOLE_OT_execute multiple times in a row).
Maniphest Tasks: T86293
Differential Revision: https://developer.blender.org/D10625
These variables track the wmWindow.event_queue state,
however they were used in a way that wasn't correct.
- check_drag & check_click from wmWindow.eventstate
were used to track the click/drag status of events handled in
wmWindow.event_queue.
- Event's in the queue read from wmEvent.check_drag.
- Once a drag action was detected, wmWindow.eventstate.check_drag
was disabled.
Disabling drag in the event state would not change the drag state
for values already in the event queue.
Simplify logic by moving these values into the window,
so there is one place these variables are tracked.
- Only sort by the preset name (not it's directory).
- Remove redundant string conversion.
- Only call lower() once on the input.
- Don't assign the lambda to a variable for single use.
It is quite common to high framerate video with modern cameras. To make
it easier to edit this footage new framerate presets are added and the
soft limit increased.
Note there is a bug with preset ordering, Blender thinks "120" goes
before "24" this bug needs to be fixed before these changes can be
merged.
Differential Revision: https://developer.blender.org/D10553
Because of D10469 we can now not force child windows onto parent's monitor and allow them to go where they wish.
Differential Revision: https://developer.blender.org/D10593
Reviewed by Ray Molenkamp
Windows 10 supports V100 on all consoles given
you enable the ENABLE_VIRTUAL_TERMINAL_PROCESSING
flag for the console.
This patch enables color logging only on windows
10 and only if the log is not being redirected
to a file.
Differential Revision: https://developer.blender.org/D10546
Now, if the Autokey is not enabled, a new frame is not created and it is used the last active one. If no active frame, a message is displayed and the operation is canceled.
This is a common request for 2D artists.
Also, grease pencil was not working as Blender does in other areas.
Reviewed By: pepeland
Differential Revision: https://developer.blender.org/D10557
This was reported for remesh and skin modifiers.
These dont preserve UV layers (and probably cannot in a reasonable way),
so instead let the UV Project modifier create a new (equally named) UV
layer (as was suggested by @brecht in T59376).
Maniphest Tasks: T59376
Differential Revision: https://developer.blender.org/D10617
The `MAX_LIBARRAY` define was an annoying doublon to the `INDEX_ID_MAX` enum value
now defined in `DNA_ID.h`, and it is no more useful.
And comments were somewhat outdated. Also added an explanation about
chosen order for the `INDEX_ID_<IDTYPE>` order.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
