Compressing blendfiles can help save a lot of disk space, but the slowdown
while loading and saving is a major annoyance.
Currently Blender uses Zlib (aka gzip aka Deflate) for compression, but there
are now several more modern algorithms that outperform it in every way.
In this patch, I decided for Zstandard aka Zstd for several reasons:
- It is widely supported, both in other programs and libraries as well as in
general-purpose compression utilities on Unix
- It is extremely flexible - spanning several orders of magnitude of
compression speeds depending on the level setting.
- It is pretty much on the Pareto frontier for all of its configurations
(meaning that no other algorithm is both faster and more efficient).
One downside of course is that older versions of Blender will not be able to
read these files, but one can always just re-save them without compression or
decompress the file manually with an external tool.
The implementation here saves additional metadata into the compressed file in
order to allow for efficient seeking when loading. This is standard-compliant
and will be ignored by other tools that support Zstd.
If the metadata is not present (e.g. because you manually compressed a .blend
file with another tool), Blender will fall back to sequential reading.
Saving is multithreaded to improve performance. Loading is currently not
multithreaded since it's not easy to predict the access patterns of the
loading code when seeking is supported.
In the future, we might want to look into making this more predictable or
disabling seeking for the main .blend file, which would then allow for
multiple background threads that decompress data ahead of time.
The compression level was chosen to get sizes comparable to previous versions
at much higher speeds. In the future, this could be exposed as an option.
Reviewed By: campbellbarton, brecht, mont29
Differential Revision: https://developer.blender.org/D5799
Instead of handling mmap, compression etc. all directly in readfile.c, refactor
the code to use a generic FileReader.
This makes it easier to add new compression methods or similar, and allows to
reuse the logic in other places (e.g. thumbnail reading).
Reviewed By: campbellbarton, brecht, mont29
Differential Revision: https://developer.blender.org/D5799
With the ongoing transition to C++ files, Windows build
breaks often because of designated initializers.
Now we have two compilers to catch the MSVC build error on.
Reviewed By: #platform_macos, brecht, campbellbarton
Differential Revision: https://developer.blender.org/D11940
Optimization of font kerning by only caching kerning values after a
pair is encountered. Also saves unscaled values so they don't have to
be rebuilt between font size changes.
See D12274 for more details and speed comparison.
Differential Revision: https://developer.blender.org/D12274
Reviewed by Campbell Barton
Updates sphinx and the theme to the latest version along with any of their dependencies.
Note that we will be sticking to sphinx 4.1.1 until sphinx 4.2 for the same reasons listed in:
https://developer.blender.org/rBM8334
This adds a setting to enable data caching, and another one to set the
maximum cache size in megabytes.
When caching is enabled we load the data for the entire animation in
memory, as we already do, however, if the data exceeds the memory limit,
render is aborted.
When caching is disabled, we simply load the data for the current frame
in memory.
Ref D10197
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D11163
The multi-function network system was able to compose multiple
multi-functions into a new one and to evaluate that efficiently.
This functionality was heavily used by the particle nodes prototype
a year ago. However, since then we only used multi-functions
without the need to compose them in geometry nodes.
The upcoming "fields" in geometry nodes will need a way to
compose multi-functions again. Unfortunately, the code removed
in this commit was not ideal for this different kind of function
composition. I've been working on an alternative that will be added
separately when it becomes needed.
I've had to update all the function nodes, because their interface
depended on the multi-function network data structure a bit.
The actual multi-function implementations are still the same though.
As subdivision objects are first class citizens in Alembic, to
differentiate them with non-subdivided polygon meshes, the Alembic
Procedural automatically sets up subdivision properties on the generated
Cycles Mesh.
However, for real-time playback subdivision is far too slow, so this
modifies the detection of a MeshSeqCache modifier used to activate the
procedural to allow for a Subsurf modifier right after the cache one. If
present, the procedural will tag the object for subdivision, if absent, the
object will be treated as a regular mesh.
This is a temporary measure for until subdivision surface settings are part
of the Mesh datablock (see T68891).
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D11162
Several pure runtime data in this ID type were not properly cleared by
write/read processes.
Note that the initial undo step (the one leading back to initial read
file state) is still forcing re-load of image, for some reasons.
Common investigation together with Jeroen Bakker (@jbakker), thanks. See
also D12242.
This was partially broken with {rBde9ea94fc6f}.
The `Frame Step` and `Second Step` snapping options were working as if
they were `Nearest Frame` and `Nearest Second` respectively in the
`Dope Sheet` and `NLA` editors.
In the `Graph Editor` the problem was more serious:
"Second Step: ... The keyframe itself moves along as though in snapping
were active at all, while its handles 'stay behind' until it reaches
the next second boundary, at which point the teleport handles to
'catch up'".
The snapping code for these modes was spread across the transform
mode code and `recalcData` of each data type. Therefore, create a
unified snapping code for these options so that all issues are fixed in
one place.
Differetial Revision: https://developer.blender.org/D12241
`td2d->loc`, `td2d->loc2d`, `td->loc` and `td->iloc` were not being
initialized as is done with the other conversion types.
This avoids problems with transform modes becoming incompatible.
This avoids problems with incompatible transform modes that could
result in a crash.
This was not really useful, and added estra useless steps in case and ID
should not actually be written.
Further more, it prevented clearing the usercount on write, which can be
cause a false positive 'chanhged' detection in undo/redo case.
This patch exposes the Cycles Alembic Procedural through the MeshSequenceCache
modifier in order to use and test it from Blender.
To enable it, one has to switch the render feature set to experimental and
activate the Procedural in the modifier. An Alembic Procedural is then
created for each CacheFile from Blender set to use the Procedural, and each
Blender object having a MeshSequenceCache modifier is added to list of objects
of the right procedural.
The procedural's parameters derive from the CacheFile's properties which are
already exposed in the UI through the modifier, although more Cycles specific
options might be added in the future.
As there is currently no cache controls and since we load all the data at the
beginning of the render session, the procedural is only available during
viewport renders at the moment. When an Alembic procedural is rendered, data
from the archive are not read on the Blender side.
If a Cycles render is not active and the CacheFile is set to use the Cycles Procedural,
bounding boxes are used to display the objects in the scene as a signal that the
objects are not processed by Blender anymore. This is standard in other DCCs.
However this does not reduce the memory usage from Blender as the Alembic data
was already loaded either during an import or during a .blend file read.
This is mostly a hack to test the Cycles Alembic procedural until we have a
better Blender side mechanism for letting renderers load their own geometry,
which will be based on import and export settings on Collections (T68933).
Ref T79174, D3089
Reviewed By: brecht, sybren
Maniphest Tasks: T79174
Differential Revision: https://developer.blender.org/D10197
The current behavior of the Alembic importer is to only create a
`MeshSequenceCache` modifier or a `Transform Cache` constraint to imported
objects if they have some animated properties.
Since static objects do not have a cache reader, when reloading files those
objects are not updated. Currently, the only way to properly reload a file
because of this is to reimport it.
This adds an option to the importer to always add a cache reader, even if
there is no animated data, to ensure that all objects coming from Alembic
archive are linked to them and updated properly upon reloads.
Reviewed by: brecht, sybren
Ref D10197.
Simplification of BLF code after removal of kerning modes.
See D12262 for more details.
Differential Revision: https://developer.blender.org/D12262
Reviewed by Campbell Barton
This patch removes the "Kerning Style" option for UI widget font
drawing and uses only the current default of "Fitted", since the other
option of "Unfitted" is just the result of truncation errors.
see D12231 for much more information.
Differential Revision: https://developer.blender.org/D12231
Reviewed by Campbell Barton
The main reason for this is to speed up updates by avoid unnecessary
copies as the Generated coordinates are a copy of the vertices.
Creating this attribute may become optional in the future, with UI
parameters to select which attribute to use from the Alembic archive as
reference.
This modifies the attribute lookup to use object coordinates if no
generated coordinates are found on the geometry.
This is useful to avoid creating and copying this attribute, thus saving
a bit of time and memory.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D12238
Vertex normals are needed for normals maps and therefore are packed and send
to the device alongside the other float3 attributes. However, we already pack
and send vertex normals through `DeviceScene.tri_vnormal`.
This removes the packing of vertex normals from the attributes buffer, and
reuses `tri_vnormal` in the kernel for normals lookup for normal maps, which
reduces memory usage a bit, and speeds up device updates.
This also fixes potential missing normals updates following rB12a06292af86,
since the need for vertex normals for normals maps was overlooked.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D12237
Followup to previous commit, rBfffe219bdb8drBfffe219bdb8d
Again this is only for sake of sane ID/overrides managment for now,
the nodetrees themselves are not overridable from user PoV yet.
This reverts rB6899dbef77cd and makes the pointer explicitely
processable by override & diffing code.
Previous changes & fixes have fixed the 'driver-workaround' case afaict.
Note that this only enables proper generic handling of overrides and
their ID pointers, no node property is actually overridable currently.
Embedded IDs (root nodetrees, master collection, etc.) pointer itself is
not editable, but their content may be overridden.
LibOverride code is supposed to know how to handle those embedded IDs.
This should be a no-change commit for now, but is required to enable
initial basic support of nodetrees in library override.
NOTE: Proper full support of liboverrides in nodes is yet to be designed
(has UX unresolved issues, since we likely do not want to expose/make
overridable ALL settings of ALL nodes).
This code checks whether an ID pointer property of an override does not
match its linked reference when it is expected to do so.
This is a goiod indication that a resync is needed.
Previous code would falsy detect overrides of IDs referencing themselves
as needing a resync, when this is not effectively the case.
Caused by {rBbbb1936411a5}.
When adding strips via the new SEQ_add_XXX_strip functions, the
`Editing->seqbasep` pointer was passed around.
Following in `seq_add_generic_update` this `seqbasep` pointer was used
to ensure a unique name.
But `seqbasep` is the pointer to the current list of seq's being edited
(**which can be limited to the ones within a meta strip**).
We need unique names across all strips though (since these are used for
RNA paths, FCurves as reported), so now use the scene's `Editing-
>seqbase` (**which is the list of the top-most sequences**) instead.
Unfortunately this might have screwed files to a borked state, not sure
if this could easily be fixed...
Maniphest Tasks: T90737
Differential Revision: https://developer.blender.org/D12256
Master multiplied the weight paint on top of the rendered image. This
reduced readability.
This patch removes the multiplication for weight painting and adds a
hint of the geometry below the overlay.
Reviewed By: Mets, pablodp606, campbellbarton
Maniphest Tasks: T73434
Differential Revision: https://developer.blender.org/D12170
Removes the artificial requirement that UDIM tile sets start at 1001.
Blender was already capable of handling sparse tile sets (non-contiguous
tiles) so the restriction around starting at 1001 was unnecessary in
general.
This required fixing a few UDIM-related python bugs around manually
updating the `tile_number` field on images as well. See the differential
for details. No script changes are necessary but they will now work,
correctly, in many more cases.
Differential Revision: https://developer.blender.org/D11859
Lowers tile splitting limit so models with extremely dense mesh
portions could still have reasonable performance while for more
common cases the performance impact should be minimal.
Reviewed By: Sebastian Parborg (zeddb), Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12236
When using wireframe opacity, the paint overlay needs to be drawn
before the wireframes in order to alpha blend correctly.
Sculpt overlays were also affected by this, so this commit refactors
this part of the code in case other overlays needs to be added in
the future.
Reviewed By: Mets
Differential Revision: https://developer.blender.org/D12235
There was an unreported bug that switch direction would not switch the order of the vertex group weights. This caused join to do it wrong as well.
Changed to use `BLI_array_reverse` function here to reverse both the normal points and the weights, therefore simplifying the code.
Differential Revision: https://developer.blender.org/D12251
`frame_current_final()` should be used to access the Scene time after
remapping, which also matches how the particles system handles time.
Reviewed By: brecht
Maniphest Tasks: T77307
Differential Revision: https://developer.blender.org/D12239
Standard attributes are not added to the attributes requests when
shaders only have displacement. This is because nodes are only
considering the case when the surface socket is connected.
To support this, added `Shader.has_surface_link()` which checks for both
cases (`has_surface` and `has_displacement`) and replaces all checks on
`Shader.has_surface`.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D12240
This patch adds the missing ability to keep the vertex groups when converting to a grease pencil object. This is increadible useful to create rigged grease pencil objects which move together with rigged meshes.
Differential Revision: https://developer.blender.org/D12249
Reuse existing enums instead of expanding them since it bloats the binary.
The icons enum for example contains over 900 items and was being
expanded 17 times (once for each function that takes an icon argument).
Similar with the event type enum which contains over 200 items and was
duplicated 7 times.
makesrna.c now matches enum definitions from declarations in
RNA_enum_items.h, using their identifiers when found.
The overall space saving on my system is 776kb
(tested with a stripped release build).
Reviewed By: brecht
Ref D12245
This was not working like elsewhere in both NLA and Graph Editor
(meaning that when snapping was already enabled, {key Ctrl} during
transform did not disable it).
Now use getAnimEdit_SnapMode() for this in NLA and GE as well.
Maniphest Tasks: T87173
Differential Revision: https://developer.blender.org/D12244
When adding a range of tiles, the operator could incorrectly calculate
the end_tile. It would not account for the start_tile itself and the
IMA_UDIM_MAX value was 1 too small. This is most noticeable when
attempting to fill the entire supported range of tiles.
Differential Revision: https://developer.blender.org/D11857
Bug caused by integer overflow in ffmpeg_generic_seek_workaround().
Function max_ii() was used to limit int_64tvalue.
After fixing the issue there was another issue, where near-infinite loop
was caused by requested_pos being very large and stream being cut in a
way, that it was missing keyframe at beginning.
This was fixed by checking if we are reading beyond file content.
Reviewed By: zeddb
Differential Revision: https://developer.blender.org/D11888
Refactor and improve waveform drawing.
Drawing now can use line strips to draw waveforms instead of only
triangle strips. This makes us able to properly visualize thin waveforms
as they would not be visible before. We now also draw the RMS value of
the waveform.
The waveform drawing is now also properly aligned to the screen pixels
to avoid flickering when transforming the strip.
Reviewed By: Richard Antalik
Differential Revision: https://developer.blender.org/D11184
The duration and start time for audio strips were not correctly read in
audaspace.
Some video files have a "lead in" section of audio that plays before the
video starts playing back. Before this patch, we would play this lead in
audio at the same time as the video started and thus the audio would not
be in sync anymore.
Now the lead in audio is cut off and the duration should be correctly
calculated with this in mind.
If the audio starts after the video, the audio strip is shifted to
account for this, but it will also lead to cut off audio which might not
be wanted. However we don't have a simple way to solve this at this
point.
Differential Revision: http://developer.blender.org/D11917
The seek pts was not correctly calculated.
In addition to that we were not seeking in the video pts time base.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11921
The video duration was not read correctly from the video file.
It would use the global duration of the file which does in some cases
not line up with the actual duration of the video stream.
Now we take the video stream duration and start time into account when
calculating the strip duration.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11920
If the add strip operator errored out, we wouldn't free custom data allocated
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11919
Before we didn't encode the audio up until the current frame.
This lead to us not encoding the last video frame of audio.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11918
We didn't flush audio after encoding finished which lead to audio
packets being lost.
In addition to this the audio timestamps were wrong because we
incremented the current audio time before using it.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11916
Replaces the boolean option with enum menus for consistency
with the subdivision modifier (rB66151b5de3ff,rB3d3b6d94e6e).
Adds all UV interpolation options.
Original patch by Eitan. Updated by Himanshi Kalra <calra>.
{F9883204}
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D10417
Add color data type comparison for meshes, adding it as
part of comparing meshes with geometry nodes applied.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D12192
blf_kerning_cache_new was performing many unnecessary hash lookups,
calling blf_glyph_search 32768 times. Use a lookup table to reduce this
to the number of ASCII characters (128 calls).
This addresses reduced visibility of scenes (as displayed in the VR
headset) that can result from the 8-bit color depth format currently
used for XR swapchain images.
By switching to a swapchain format with higher color depth (RGB10_A2,
RGBA16, RGBA16F) for supported runtimes, visibility in VR should be
noticeably improved.
However, current limitations are lack of support for these higher
color depth formats by some XR runtimes, especially for OpenGL.
Also important to note that GPU_offscreen_create() now explicitly
takes in the texture format (eGPUTextureFormat) instead of a
"high_bitdepth" boolean.
Reviewed By: Julian Eisel, Clément Foucault
Differential Revision: http://developer.blender.org/D9842
This patch turns off the preloading of ascii glyphs and instead caches
each glyph the first time it is actually used.
See D12215 for much more detail.
Differential Revision: https://developer.blender.org/D12215
Reviewed by Campbell Barton
This patch makes some non-functional changes to BLF code. Some size
defines added, comments changed, simplification of macro
BLF_KERNING_VARS.
See D12200 for more details.
Differential Revision: https://developer.blender.org/D12200
Reviewed by Campbell Barton
Some of the enum options in the context menu operations are not
supported for all element types.
`TSE_SEQUENCE`, for example, only supports the `Select` option.
So, populate the enum list dynamically depending on the type.
Also add some calls that were missing for the `TSE_SEQUENCE` type.
(`WM_event_add_notifier` and `ED_undo_push`).
There was already some code for that, but it was broken, and proper
resync was completely missing.
There might still be more resync needed in library linking operators
though.
Add a debug-only check regarding consistency of the cache (mapping from
objects to their bases) for a given ViewLayer.
Issues can happen otherwise when some code does remapping of objects,
and forgets to call `BKE_main_collection_sync_remap()` (which clears
those caches) instead of `BKE_main_collection_sync()`.
channel names
Working with multiple strips keyframes was unneccessarily difficult in
Animation Editors (since some anim channels could not be distinguished).
Namely `Crop` and `Transform` are nested structs (nested under
`Sequence`), so these were just displaying the raw struct name.
Also strip modifiers did not have their strip name in their channel
names. Now include the strip name for these.
before
{F10277439}
after
{F10277441}
Maniphest Tasks: T90595
Differential Revision: https://developer.blender.org/D12193
While trying to get Blender 2.93.x LTS to build fine on all release architectures in Debian, I noticed that the misleading use of "mips" as integer variable caused problems when compiling on mips64el. The patch should fix the issue.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D12194
This reverts commit 41e6509818.
This broke "CubeMaskFirst" test.
Any value even slightly outside the [-1.0..1.0] range
caused the result to be nan, which can happen when calculating
the dot-product between two unit length vectors.
When in NLA tweak mode, the action unlink button in the Dopesheet /
Action Editor should be a mere shortcut to exiting tweak mode [nothing
else].
Instead, it was also clearing the action fully, not returning to the
previous edited action before going into tweak mode.
Now dont "flush" by clearing the action, instead exit tweakmode, clear
the scenes SCE_NLA_EDIT_ON flag (if this isnt done some NLA operators
like pushdown were not immediately available because their poll checked
this flag) and send appropriate notifier to have everything update nicely.
Part of T87681 (Bug 4/5/6).
Maniphest Tasks: T87681
Differential Revision: https://developer.blender.org/D11052
Animation indicators as well as decorators for properties were not
updating correctly in the following cases:
- NLA pushdown (this was reported in T87681)
- NLA enter/exit tweakmode
- Outliner unlinking/setting action
These actions all send a ND_NLA_ACTCHANGE notifier which the Properties
Editor was not listening to [which is now added].
part of T87681.
Maniphest Tasks: T87681
Differential Revision: https://developer.blender.org/D11040
This change reduces the GPU context switches when drawing keyframes.
In the previous situation the keyframe blocks and keyframe keys were
drawn per channel. With this patch first all the keyframe blocks are
drawn for all channels and after that the keyframe keys are collected
for all channels and send to the GPU in a single draw call.
This was left over from when these scripts were loaded as modules,
where their names needed to be compatible with Pythons module naming.
Version patch existing files so text with register enabled
without a `.py` extension wont start executing on startup.
Resolves T89532.
This supported calculating normals for MPoly array which was copied to
an MFace aligned array.
Remove the functions entirely since MFace use is being phased out and
these function isn't used anywhere.
Use BKE_mesh_calc_normals instead of
BKE_mesh_calc_normals_mapping_simple for curve modifier calculation.
This only made sense for derived-mesh which is no longer used.
Remove the 'only_face_normals' argument.
- BKE_mesh_calc_normals_poly for polygon normals.
- BKE_mesh_calc_normals_poly_and_vertex for poly and vertex normals.
Order arguments logically:
- Pair array and length arguments.
- Position normal array arguments (to be filled) last.
Optimize mesh normal calculation.
- Remove the intermediate `lnors_weighted` array, accumulate directly
into the normal array using a spin-lock for thread safety.
- Remove single threaded iteration over loops
(normal calculation is now fully multi-threaded).
- Remove stack array (alloca) for pre-calculating edge-directions.
Summary of Performance Characteristics:
- The largest gains are for single high poly meshes, with isolated
normal-calculation benchmarks of meshes over ~1.5 million showing
2x+ speedup, ~25 million polygons are ~2.85x faster.
- Single lower poly meshes (250k polys) can be ~2x slower.
Since these meshes aren't normally a bottleneck,
and this problem isn't noticeable on large scenes,
we considered the performance trade-off reasonable.
- The performance difference reduces with larger scenes,
tests with production files from "Sprite Fight" showing
the same or slightly better overall performance.
NOTE: tested on a AMD Ryzen TR 3970X 32-Core.
For more details & benchmarking scripts, see the patch description.
Reviewed By: mont29
Ref D11993
The poll for unlinking calls `nla_panel_context` without providing an
adt pointer, and there is a check for this pointer in
`nla_panel_context` leading to never returning true if it is not
provided. (this is fine if there are tracks already, poll would succeed
in this case, `nla_panel_context` goes a different code path then)
Same call to `nla_panel_context` is also done in the beginning of the
corresponding unlink exec function (but this time providing the pointer
because it is used later), so it makes sense to do the same thing in the
poll function. Equal check is also done in the panel poll function, so
now these are all in sync.
Part of T87681.
Maniphest Tasks: T87681
Differential Revision: https://developer.blender.org/D11041
Was reported for a file which does not have an active track set in
AnimData even though it was in strip twek mode (but this was accessed in
is_nlatrack_evaluatable()).
Root cause for this is not totally clear, but I assume the situation is
described as part T87681 (and is fixed in D11052).
This patch here just prevents the crash for files that are already in the
borked state.
Reviewers: sybren
Maniphest Tasks: T89805
Differential Revision: https://developer.blender.org/D12085
Clearing the parent from the UI using the X (or from python) clears the
`parsubstr` and set `partype` back to `PAROBJECT`.
Using the Clear Parent operator would leave the `parsubstr` (and thus
`parent_bone`) untouched even though this operator claims to "clear
parenting relationship completely" (it also removes parent deform
modifiers for example).
So now, also clear `parsubstr` and set back to `PAROBJECT` [which is
default].
Maniphest Tasks: T88498
Differential Revision: https://developer.blender.org/D11503
Add Apply Constraint, Duplicate Constraint, and Copy To Selected
operators, and include them in a menu similar to the menu for modifiers.
The shortcuts in the extras menu are also matched to modifiers.
All the here added operators are intended to work exactly like the
analogous ones for modifiers. That means the apply operator should apply
a constraint as if it was first in the list, just like modifiers do. I
have added the same warning message as for modifiers when that happens.
The decision to use this approach of appling the constraint as if it was
first, was made for consistency with modifiers. People are already used
to how it works there. Is also provides more intricate control over the
applied transforms, then just applying all constraints up to that one.
Apply all constraints is already kinda implemented in Bake Animation.
Reviewed By: HooglyBoogly, sybren, #user_interface
Differential Revision: https://developer.blender.org/D10914
During the processing of a continuous drag event, other mouse move
events may be in the queue waiting to be processed.
But when a mouse wrapping happens, these waiting mouse move events
become out of date as they report a mouse position prior to wrapping.
The current code ignores these events by comparing their `timestamp` to
the time recorded in the last mouse wrapping.
The bug happens because the computed value in
`mach_absolute_time() * 1e-9` for some reason is incompatible with the
value of `[event timestamp]`.
Since macOS 10.6, we have a new way to get the amount of time the
system has been awake. `[[NSProcessInfo processInfo] systemUptime]`.
Using this updated method fixed the problem.
Differential Revision: https://developer.blender.org/D12202
Clearing the window was done in wm_file_read_post which was deferred.
This was needed as it left the context in an invalid state
where the window was set but the screen wasn't.
Crashing when setting up keymaps that attempted to access the
scene from the window in the property update function.
Regression in 497bc4d199
Add RNA_struct_type_find_property_no_base for use in the rare situations
when this isn't desired.
Resolves T90617, where sequence strip sub-types weren't detecting
properties that exist in the base "Sequence" types.
- Remove old comment for editors with weak syntax highlighting.
- Remove disabled code to initialize Blender with a file path.
- Remove file name references to function names since these
were outdated, modern development environments can look up this info.
Resolve order of initialization error reading startup file,
support postponing running wm_file_read_post until Blender
has been initialized.
Deferring updates allows duplicate initialization
to be removed from WM_init.
Reviewed By: mont29
Ref D12184
Makesdna fails to detect issues in 32 bit code that can
only be resolved by adding a padding pointer.
We never noticed since we ourselves no longer build for
32 bit, but debian's 32 bit builds got bitten by this
A rather extensive explanation on why this is alignment
requirement is there can be found in this comment:
https://developer.blender.org/D9389#233034
Differential Revision: https://developer.blender.org/D12188
Reviewed by: sergey, campbellbarton
Some of the dna structs were not properly
aligned for 32 bit builds causing issues
for some of the 32 platforms Debian builds
for.
Reviewed By: sergey, brecht
Differential Revision: https://developer.blender.org/D9389
The loading of a font size or style renders bitmaps of the characters
0-255 and stores them in a cache. But glyphs 128-255 in this cache are
not accessible. What used to be ansi high-bit characters are now multi-
byte UTF-8 sequences.
Therefore this patch reduces the glyph_ascii_table size to 128 and
only caches characters 32-127, the visible portion of ASCII, which
greatly reduces the time to load a font.
See D12189 for more details.
Differential Revision: https://developer.blender.org/D12189
Reviewed by Campbell Barton
Before this commit rendering material icons the floor will is hidden.
This reduces the readability of reflective/refractive materials.
check patch for additional screenshots and notes.
This patch will switch the floor material that uses ray visibility tricks to render a floor for reflective rays.
Eevee uses screen space reflections that makes this a different problem. There is nothing else drawn in
the scene in screen space so we need a different trick. Using math we convert a reflective ray to UV space
and generate a world that projects a checker pattern to infinity.
As now the floor is in the world it is being reflected via
a cubemap. As the film is transparent the background (including the floor isn't rendered)
In the future when Eevee supports vulkan raytracing we can re-evaluate and perhaps remove this
approximation.
We tried lightprobes but that wasn't able to do the trick.
Using the compositor would lead to more memory usage (render layers and intermediate buffers) and slower performance.
Solution has been validated with Simon
Reviewed By: sybren, Severin
Differential Revision: https://developer.blender.org/D11988
To improve the presentation of nodes in the node editor. Recognize the
following metadata from the OSL specification:
* [[ string label = "UI Label" ]]
* [[ string widget = "checkBox" ]]
* [[ string widget = "boolean" ]]
Ref T89741
Differential Revision: https://developer.blender.org/D12074
Idea for 3.0 is to disable all functionality that isn't well polished
and focus on those parts first. Starting with poses.
* Adds a new experimental option "Extended Asset Browser", replacing
"Asset Browser".
* Unlike the previous option, this isn't enabled by default anymore.
This didn't work well in practice and caused plenty of confusion.
* "Mark as Asset" and "Clear Asset" are hidden if the option is
disabled.
* Same for the category selection in the Asset Browser.
* Always show display the "Only Assets" option in the File Browser while
browing inside .blend files. That way you can hide data-blocks that
are not pose assets.
* The Asset Library setup UI in the Preferences is always visible now,
it's needed for pose library access.
Addresses T90181, T90180 and T90300.
Differential Revision: https://developer.blender.org/D12120
ID data-blocks that could be accessed from Python and weren't freed
using BKE_id_free_ex did not release the Python reference count.
Add BKE_libblock_free_data_py function to clear the Python reference
in this case.
Add asserts to ensure no Python reference is held in situations
when ID's are copied for internal use (not exposed through the RNA API),
to ensure these kinds of leaks don't go by unnoticed again.
Using high quality normals for vertex offset when set
for higher precision offsets.
This was only used for calculating even-offset.
Reviewed By: campbellbarton
Ref D12176
This is a slight refactoring of the Win32 IME code to remove the use of
Language IDs, which is now strongly deprecated. Instead this uses the
new recommended Locale Names, ie ISO-639-1 2-letter abbreviated names
like "en" for English rather than ID 0x09.
See D12143 for more details.
Differential Revision: https://developer.blender.org/D12143
Reviewed by Ray Molenkamp
bounding boxes
These are namely 'LIGHT', 'CAMERA', 'EMPTY', 'SPEAKER' and 'LIGHTPROBE'.
Note that Empties are included here despite the fact that they have
instancing capabilities ('Display As' can be 'Bounds' for example which
then displays all instanced geometry with boundingboxes -- this however
is not meant to work with the 'Bounds' checkbox and the display bounds
type, these are only affective for the object itself, not its instances)
Issue came up in T88443.
Maniphest Tasks: T88443
Differential Revision: https://developer.blender.org/D11344
Adds full frame implementation to "Composite", "File Output" and
"Split Viewer" nodes.
The other nodes in "Output" submenu are implemented separately.
No functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12091
Adds full frame implementation to "Alpha Over",
"Hue Saturation Value", "Invert", "Tonemap" and "ZCombine" nodes.
The other nodes in "Color" submenu are implemented separately.
No functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12092
It was only affecting tiled fallback on full frame mode. If tiles from a
constant operation were multi-thread initialized, its buffer
was inflated multiple times.
Adds full frame implementation to "Bokeh Image" node, "Track Position"
node, `SetVectorOperation` and `MovieClipAttribute`.
The other nodes in "Input" submenu are implemented separately.
`MovieClipAttribute` needs resolution to calculate its constant value, it can't be constant folded,
which requires it to be a `ConstantOperation`. Now `ConstantOperation` contemplate this case
and any operation that is always constant without depending on inputs should implement it.
If in the future an operation needs to get an input constant element during
`determineResolution` it must first determine its input resolution.
The nodes have no functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12090
Adds full frame implementation to this node operations.
No functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11751
Adds full frame implementation to this node operation.
No functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11634
Adds full frame implementation to this node operation.
No functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11694
Empties can only instance a collection, instancing on "Vertices" or
"Faces" does not make sense for empties, make that clear in the UI.
ref D11348
Maniphest Tasks: T88443
Differential Revision: https://developer.blender.org/D11349
Basically, only meshes, empties and pointclouds support direct
instancing atm., no need to have the panel for other types.
note: prior to rB2eca054e14b1, collection instancing was possible on all
types (but that was removed in said commit)
note2: for empties, rna_Object_instance_type_itemf should also be
tweaked so we dont get "Vertices" and "Faces" options, but that can be
done in a separate commit
Maniphest Tasks: T88443
Differential Revision: https://developer.blender.org/D11348
Added the comparison of non-generic attributes with generic
attributes in the same loop to avoid issues with different
order in layer->types of the two meshes.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D12149
Caused by {rB37570a73170e}.
Above commit wasnt taking into account that at this point the link could
still be NULL.
Maniphest Tasks: T90564
Differential Revision: https://developer.blender.org/D12180
Right clicking would spawn the context menu under the cursor, but some
operators would actually act on the active asset/file which wasn't
the one clicked on.
When multiple files are selected and one of them is right-clicked on,
selection is not changed to allow operations on multiple files. E.g.
deletion.
This makes the File/Asset Browser match the Outliner (in behavior, not
implementation).
For the right-click selection keymap:
* The context menu still only spawns on W.
* Bonus: Right click now does something, it actually selects files!
I could have done additional changes here to avoid this, but it seems
like a good addition.
This is also a better alternative to rB5edfde58fe60, which didn't work
properly either. Using rename from the context menu would only work if
the clicked on file was also active...
Differential Revision: https://developer.blender.org/D12065
Reviewed by: Campbell Barton
When blender starts and the mouse is over a file/asset browser it
crashes. This is because blender wants to highlight a file, but the
layout isn't initialized yet.
Blender forbids property changes in .draw() methods. But they weren't
caught after a call to .template_list() with a custom list type.
Support nested calls that disallow writes.
Caused by {rBe3faef686d38}.
Error was getting the preview [which wasnt there yet]
These only appeared once the material tab in the Properties Editor was
used (since this ensured a valid preview icon).
Above commit changed behavior for RNA icon getter (this does not create
data anymore), so ensure the preview by hand here.
Maniphest Tasks: T89284
Differential Revision: https://developer.blender.org/D12178
This was really missing there (some COW tags behavior was also
documented in some code using them, like in `sound.c`, but not in their
definition).
Ref. T88555.
Change the dylib folder relative to `Blender` executable to be
the same as before rB652fbc200500497a67bd11d18b786587ba34e3d9 and same
as bpy.so : `@loader_path/../Resources/${BLENDER_VERSION}/lib`
The crash occurred calling because mesh_get_eval_final in edit-mode
freed all derived mesh data without tagging the object for updating.
However meshes in edit-mode weren't meant to be used as knife-project
source-data, adding support for multi object edit-mode caused this.
This makes texture sockets have a label by default. This can be changed
by adding the SOCK_HIDE_LABEL flag to the socket. With this change the
switch node now shows the labels "True" and "False" like for the other
types of sockets.
To be consistent with the image editors and 3D viewport
the cursor location can be changed from the sidebar.
This was missing from the clip editor, but support has been added in this commit.
Previously, the only way to precisely set the cursor was
to call the set cursor operator then use the redo panel to adjust the value.
To be consistent with all other editors the annotation
layers pannel should be placed in a "View Tab".
In my next commit, this tab will be expanded to include other options.
The 2D cursor should be visible in both mask and uv edit modes.
This was likely and oversight when splitting the image editor
into the UV and Image editors
* Revert back to OpenMP 9.0.1 due to bug causing cloth physics test to fail.
* Skip flex build on macOS to avoid link error, only reason we build this is
due to old flex version on Linux CentOS 7.
* Fix PNG cmake argument that expects lowercase on instead of ON.
Ref T90507, T88438
Pass `FileListReadJob` to the `read_job_fn` callback, instead of exploding
the struct into its individual fields, passing those as parameters, and
marking a bunch of those as unused again.
No functional changes.
Caused by fix for T90256 and a misunderstanding in D11928.
Don't skip tagging edges when the auto-smooth angle is 180 degrees
since this skips topology checks which are needed for properly
calculating edge loop normals.
Caused by 4f64fa4f86.
Was a bad backport from the Cycles X branch: the fact that CPU and GPU
has different reset code paths was not taken into account.
`bpy.ops.font.text_insert(text="multiple characters")` wasn't working.
When the text is selected does not correctly insert multiple characters.
- When the text was selected from left to right,
the cursor only move one position next to the selected text.
- When the text is selected from right to left,
a part of the selected text remain.
Ref D12161
- Remove check for screens being None as this would raise an error.
- Replace loop over `area.spaces` with `area.spaces.active`.
- Loop over grease pencil data directly instead of accessing
through the scenes objects.
- Split versioning into functions.
- Use `update_factory_startup_*` prefix for function names
as this isn't versioning existing files.
This commit makes the display options for mask only show in the header for the clip and image editors.
Prior to this change they would display in the header for the clip editor and in the sidebar for the image editors.
This commit does two things, first it removes the proportional editing tool settings.
This is not accessible code and is has not been used since the grease pencil/annotations changes in 2.8.
Second, this patch reorders the if statements so that the display options are always shown on the rightside.
Reviewed By: antoniov
Differential Revision: https://developer.blender.org/D12163
This seems to be really old code from 2.4 or earlier.
I was unable to find when it was removed gitk and git blame both couldnt find anything.
However, it is safe to say that this code is long gone.
Fix poll_message_set API documentation to consistent with Python style
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D12150
This adds support to compile the html python api docs from the command line by running `make doc_py` matching support between windows and unix.
This patch also makes it so the compiler is not needed if you set the `blender_bin` variable, this affects icon generation as well.
In the future, I want to move away from generating the build output in the build directory but that can come in a later change.
Reviewed By: LazyDodo
Differential Revision: https://developer.blender.org/D12144
This is a backport of recent development in the Cycles X branch.
Fixes possible dead-lock in viewport rendering when exiting at an
exact bad moment (couldn't reproduce in master branch, but in the
cycles-x branch it was happening every now and then).
Differential Revision: https://developer.blender.org/D12154
Makes it consistent with the guidelines and the Cycles X branch, and
allows to backport fix for the viewport update from the branch. Will
cause a merge conflict, which should be simple accept-ours in the
branch.
The library has some modifications and it has been included in a diff.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12142
(Some minor changes done in the patch)
In the `FileList` struct, rename the `AssetLibraryReference
*asset_library` field to `asset_library_ref` -- it's a description of
which asset library is used, and not the asset library itself.
This is to make space for a future `AssetLibrary *asset_library` field,
which will point to an actual asset library struct/class.
No functional changes.
Reviewed by: Severin
Differential Revision: https://developer.blender.org/D12151
This corrects code that's currently disabled, see `USE_NURBS` define.
The name passed to `BKE_curve_add` was overwritten,
bypassing uniqueness and utf8 encoding checks.
Longer names would cause a buffer overrun as the length of the source
data was passed to `BLI_strncpy` instead of the destination.
Reviewed By: sybren
Ref D12125
This caused Cycles texture_space_mesh_modifier and panorama_dicing tests to
randomly fail.
The issue was introduced with D11377, due to a missing dependency. Now ensure
we first copy the texture space parameters, and only then use or recompute then.
In general it seems like this dependency should have already been there, since
parameter evaluation includes animation and drivers, and geometry evaluation
may depend on that (even if you would not typically animate e.g. an autosmooth
angle).
Thanks Campbell for tracking this one down.
Although the relevant structs (wmXrRuntime/XrActionMap/
XrActionMapItem) are zero-allocated, the selected and active action
map indices need to be initialized to -1 to prevent potential
out-of-bounds list access.
Just like the "Select by Material" node, this node outputs a
boolean attribute for control points that have a matching handle
type. By default left and right handles are considered, but it's
possible to only check one side with the toggle in the node.
Differential Revision: https://developer.blender.org/D12135
Some mesh primitives created using geometry nodes use loops to create
vertices and accumulates positions/angles in FP variables. This allows
rounding errors to accumulate and can introduce significant errors.
To minimize changes from original implementation, variables allowing
errors to accumulate are replaced by: delta * index. Affected Mesh
Primitives nodes are Line, Grid, Cylinder, Circle, Cone, and UV-Sphere.
Differential Revision: https://developer.blender.org/D12136
Assigning a mesh seems to do its own parameter copying, which
means we need to manual copy its vertex groups here, which was
just overlooked in rB3b6ee8cee708.
Differential Revision: https://developer.blender.org/D12110
Generic attributes CD_PROP_* comparison is added in customdata_compare
Checks for built-in as well as user created attributes.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D12137
The Xcode IDE can also benefit from the options:
- WINDOWS_USE_VISUAL_STUDIO_SOURCE_FOLDERS
- WINDOWS_USE_VISUAL_STUDIO_PROJECT_FOLDERS
So add suport to these options and also renames them as they are no
longer limited to just Windows and Visual Studio.
Reviewed By: brecht, ankitm
Differential Revision: https://developer.blender.org/D12132
Practice shows that when combining actions and direct animation
it is usually best to combine location, rotation and scale
separately, which is implemented by the Split Channels modes
recently introduced in D9469 for Copy Transforms. This completes
the same set of 6 choices for the Action Constraint.
The default for new constraints is changed to the newly
added Before Original (Split Channels) mode.
The original patch is motivated by Loic Pinsard, who created
an addon that does the equivalent of this feature by splitting
the action into two, separating location and rotation+scale.
Differential Revision: https://developer.blender.org/D7547
The exception to automatically pin vertices of grid corners also
has to take into account that the vertex is in a boundary.
Reviewed By: JacquesLucke
Maniphest Tasks: T90235
Differential Revision: https://developer.blender.org/D12044
The active geometry element are usually updated by the cursor drawing
code (as they are needed for the cursor preview) and when an sculpt
operator starts. For brushes, this was not happening. This was making
brushes rely by default on the last cursor drawing update, which can
be incorrect if the mouse moved after starting the stroke without
hovering the active geometry.
Reviewed By: JacquesLucke
Maniphest Tasks: T90236
Differential Revision: https://developer.blender.org/D12045
Add warning(info) to nodes that don't work when an input value is
out of range. For example, the grid node doesn't work with Vertices X
or Verices Y less than 2.
These are purposefully added as "Info" warnings, because they don't
show in the modifier and they aren't printed to the terminal.
Differential Revision: https://developer.blender.org/D11923
The immediate reason for this is that we want to be able to initialize them
to different defaults for light objects, which is hard with Python properties.
But in general it is useful to be able to share these with other renderers.
As a side effect, Eevee now supports a per-object holdout instead of only
per-collection.
Differential Revision: https://developer.blender.org/D12133
Code freeing the array would not properly reset its length value to
zero.
Note that this corrupted data could also be saved in .blend files, so
had to bump fileversion and add some doversion code too.
Fix T90166: crash when creating a liboverride.
This was apparently done in two places only, with a very cryptic comment
(`/* for raw_access, untested */`), and... I cannot see how returning a
non-zero length value for an array that does not exist or is not
accessible at least, would be anything but an obvious source of issues.
Note that both commits adding those lines are from stone ages (2009):
rBcbc2c1886dee and rB50e3bb7f5f34.
The keymap is available in: Draw, Edit, Sculpt, Weight Paint and Vertex Paint modes.
The keymap is not available in Object mode to avoid any conflict.
Reviewed By: pepeland
Differential Revision: https://developer.blender.org/D12128
This is a simple engine used only to debug the texture of select ids.
It is only used when the `WITH_DRAW_DEBUG` option is enabled and the
debug value is 31.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D5490
Addresses the remaining portions of T77137 (Python API for Controller
Interaction), which was partially completed by D10942.
Adds an XR "action maps" system for loading XR action data from a
Python script. Action maps are accessible via the Python API, and are used
to pass default actions to the VR session during the
xr_session_start_pre() callback.
Since action maps are stored only as runtime data, they will be
cleaned up with the rest of the VR runtime data on file read or exit.
Reviewed By: Julian Eisel, Hans Goudey
Differential Revision: https://developer.blender.org/D10943
This is not supported currently,doing so through RNA API remains
possible, but from regular UI operations it should not be doable
anymore.
Ref. T90459.
LibOverride of scenes is not really supported currently, there are many
issues with it.
Will disable most user-accessible ways to create such overrides in a
following commit.
Provides two key improvements to runtime controller data.
1. Separates controller poses into two components, "grip" and "aim",
which are both required to accurately represent the controllers
without manual offsets.
Following their OpenXR definitions, the grip pose represents the
user's hand when holding the controller, and the aim pose represents
the controller's aiming source.
2. Runtime controller data is now stored as a dynamic array instead
of a fixed array. This makes the API/functionality more adaptable to
different systems.
Does not bring about any changes for users since only internal
runtime functionality is currently affected.
Reviewed By: Julian Eisel
Differential Revision: http://developer.blender.org/D12073
Vertices with no connected faces would attempt to divide by the combined
face area causing a divide by zero.
Use the same weight for wire vertices as vertices connected
to zero area faces.
Protect this accessor with a local static mutex when it needs to
create/write data.
Ideally accessors should never create or modify data, but there are some
cases where this bad behavior is currently unavoidable.
This is the case of the Pointer accessor when the actual IDProperty has
not yet been created.
NOTE: this fixes a memory leak in liboverride diffing process when
several different overrides use a same linked reference ID.
Differential Revision: https://developer.blender.org/D12060
Even though the ID itself remain the same after being made local, from
depsgraph point of view this is a different ID. Hence we need to tag all
of its users for COW update, as well as rebuild depsgraph relationships.
Should be also backported to LTS 2.93 (and 2.83 if possible).
Negative indices that remained negative after adding the sequence length
caused incorrect slicing.
With the default scene for example:
bpy.context.scene.objects[-4:2]
Gave a different result to:
tuple(bpy.context.scene.objects)[-4:2]
Clamp indices above zero so loops that step forward works as intended.
Provides several important improvements to the runtime action
bindings operation and internal API.
Moves input-specific action data (input thresholds, input regions,
pose offsets/spaces) from actions to more granular action bindings.
This allows a single action to be mapped to a variety of inputs,
without having to share a single input threshold, region, or space.
Also removes the need for action space creation API, as spaces for
pose actions will be automatically created with the bindings.
The correct action data for the current inputs is set by calling
xrGetCurrentInteractionProfile() to get the current profile and then
retrieving the corresponding mapped data.
Does not bring about any changes for users since only internal
runtime functionality is currently affected.
Reviewed By: Julian Eisel
Differential Revision: http://developer.blender.org/D12077
This adds support for building the icons from make.bat
unlike bash there is no passing environment variables
on the command line.
The scripts go out of their way to locate both blender
and inkscape however if they are not found, the user is
given a helpful error message telling them how to set
the variables.
Although some extra help can be given there, if your
normal build is a 2019 full build running
`make 2019 full icons`
will help it find the blender executable as well.
finally if you know the name of your build folder
running
`make builddir build_windows_Lite_x64_vc16_Release icons`
will also work, if all fails you can point directly to
the blender executable by running
`set BLENDER_BIN=c:\where\blender\lives\blender.exe`
before running `make icons` or `make icons_geom`
The python scripts needed some small modifications since
without the PATHEXT, SystemRoot and SystemDrive
environment variables python will not initialize properly
on windows. (Not blender related, even mainline python
won't start without those)
GHOST_ImeWin32::SetInputLanguage() has a confusing name because it does
not set the input language. It actually retrieves the current input
locale from the OS and caches the value of the current input language
ID. Therefore this patch renames it to "UpdateInputLanguage"
Differential Revision: https://developer.blender.org/D12134
Reviewed by Ray Molenkamp
This removes one member of GHOST_ImeWin32 that is not used and cannot
be used in the future. It is holding the result of ImmIsIME, which is
whether an input language supports IME. It does not indicate that one
is in use, turned on, composing, in English mode, etc.
see D12131 for more information.
Differential Revision: https://developer.blender.org/D12131
Reviewed by Ray Molenkamp
This makes the internal naming consistent with the public API. And also gives
us a visibility_flag rather than restrictflag that can be extended with more
flags.
This patch makes us less restrictive on the allowed types of FreeType
font character maps we allow, rather than primarily unicode-only. This
allows us to use some legacy, symbol, specialty, and proprietary fonts
like Wingdings. Note we were a little less restrictive with vfonts,
used for 3D Text Objects, so this patch primarily helps VSE.
See D12124 for details and examples.
Differential Revision: https://developer.blender.org/D12124
Reviewed by Brecht Van Lommel
When displaying the names of fonts for 3D Text objects, use the same
format as shown in File Browser: Family name + Style name. They are
currently shown with Postscript Name, which doesn't match well.
see D12069 for more details.
Differential Revision: https://developer.blender.org/D12069
Reviewed by Campbell Barton
The goal: allow to easily use AO approximation in scenes which combines
both small and large scale objects.
The idea: use per-object AO distance which will allow to override world
settings. Instancer object will "propagate" its AO distance to all its
instances unless the instance defines own distance (this allows to
modify AO distance in the shot files, without requiring to modify props
used in the shots.
Available from the new Fats GI Approximation panel in object properties.
Differential Revision: https://developer.blender.org/D12112
This is used to set the default caps type for the stroke. Before always was rounded and only could be changed later in Edit mode
Two new buttons has been added to topbar.
NOTE: New icons are been designed (T90414)
The buttons are expanded to list in Properties panel.
Reviewed By: mendio, HooglyBoogly
Differential Revision: https://developer.blender.org/D11999
rBfb87d236edb7 made the values returned by `projmat_dimensions` more
standardized following the documentations. But the functions in Blender
that called `projmat_dimensions` followed a proposal that these values
corresponded to a distance of 1m of clip.
Adjust these functions to follow the new algorithm.
This patch fixes an issue with missing faces when assigning a material slot other than the first to faces on AMD TAHITI cards. Refer to T78390 and T74024 for a description of this issue.
This patch also incorporates fix from T78390 for KAVERI.
{F9029258}
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D9305
Rename new API function introduced in recent rB3b0fab6dfaa0 to match our
convention to put the action (verb) at the end of names:
`operations_update`.
Sorry for not catching that during review.
Previous check was too blunt, preventing e.g. re-organization of
collection overrides inside a local parent collection, which is
perfectly valid operation.
Reported by @hjalti from the studio, thanks!
Loopcut drawing from gizmo had thicker lines because
it was using line smoothing without alpha blend, compared
to thin jagged lines from operator.
Make the drawing anti aliased and consistent by using
3D_POLYLINE/3D_POINT shaders, and making sure alpha
blending is on.
Reviewed By: #eevee_viewport, fclem
Differential Revision: https://developer.blender.org/D11333
While most modifies don't handle out of memory cases, ocean simulation
could attempt huge allocations: 2048 gb at the maximum resolution.
Resolves T83952.
The update_operations function will update the override structure of the
local object. When working with overrides the override structure is only
updated when the work-file is stored. When using scripts you might want
to enforce the update of override properties and operations.
This function removes a hack on the test cases.
Reviewed By: mont29
Maniphest Tasks: T86656
Differential Revision: https://developer.blender.org/D10848
This patch changes the drop named material tooltip to give feedback to
the user what is going to happen when they invoke the change.
There are 3 states:
* "": Operator will be canceled as not all data is present (dropping on
background.)
* "Drop <named material> on <object name> (slot <slot number>, replacing
<current material in slot>).
* "Drop <named material> on <object name> (slot <slot number).
Reviewed By: Severin
Maniphest Tasks: T90371
Differential Revision: https://developer.blender.org/D12106
This node sets the selected (or all) splines in curve to a chosen target
spline type. Poly, Bezier, and NURB splines can be converted to any of
the other types. This is meant to be a building block node, useful in
many procedural situations.
In the future the node could be optimized with multi-threading, or by
avoiding copying in many cases, either by retrieving the curve for write
access or by passing the raw vectors to the new splines where possible.
With edits from Hans Goudey (@HooglyBoogly)
Differential Revision: https://developer.blender.org/D12013
`r_left`, `r_right`, `r_bottom` and `r_top` were ignoring `clip_near` value
when in perspective view.
Also rename `projmat` to `winmat` in these cases.
For some reasons looks like those shortcuts could get out of sync, which
created weird hard to understand building errors.
So for sake of simplicity and security, just re-create them all the
time, just like we update ld paths.
For Blender.app: dropping libomp.dylib next to Blender executable is
enough for it getting picked up since `@executable_path` is an rpath.
For non-distributed binaries datatoc, makesdna, tests etc, code for
copying libomp.dylib to build folder is removed and replaced by
CMake's rpath option for *build* tree.
For bpy.so, the post build rpath change has also been replaced by CMake
rpath option for *install* tree.
Since -id has been changed in D11748, remove the
`install_name_tool -change ...` command.
Any dylib can just be dropped at `MAC_BLENDER_TARGET_DYLIBS_DIR`
hereafter. Appending dylib path to `CMAKE_BUILD_RPATH` will be needed
for datatoc etc if linked against one (instead of copying the
dylibs around).
Reviewed By: #platform_macos, brecht
Differential Revision: https://developer.blender.org/D11997
While this was already the case for the most part
some selection operators stored common settings for reuse such as
"toggle", "extend" & "deselect".
Disabling storing these settings for later execution
as it means failure to set these options in the key-map re-uses
the value of the shortcut that was last called.
Skip saving these settings since this is a case where reusing them
isn't helpful.
Resolves T90275.
Fix division by zero when `BKE_bone_parent_transform_invert()` inverts a
scale vector with zero components.
Zero values in the to-be-inverted vector are now simply skipped, i.e.
remain zero after inversion. This at least ensures that
`invert_v3_safe(invert_v3_safe(vector))` results in the same vector.
This commit does NOT fix the conceptual problem that an inversion of a
potentially non-invertible vector is relied upon. It just avoids the
division by zero.
When channels are scrolled to be (partially) behind the search bar,
their widget buttons would still be interactive, preventing the seach
buttons to be usable.
We have to make sure the events are consumed from the search and dont
reach other UI blocks.
We can do so by flagging the block `UI_BLOCK_CLIP_EVENTS` -- but also
have to make sure the bounds are calculated correctly (otherwise the
check relating `UI_BLOCK_CLIP_EVENTS` in `ui_but_find_mouse_over_ex` wont
trigger properly.
Maniphest Tasks: T90364
Differential Revision: https://developer.blender.org/D12103
When calculating the particle step in `get_effector_tot`, we have to
round up (otherwise we might get an extra round in the for-loop in
`BKE_effectors_apply` for certain cases).
Example from the report:
- 10.000 particles, Effector Amount 3
- was rounding the step down to 3333
- going into the for-loop for 0, 3333, 6666 and 9999 (4 times)
- now rounding the step up to 3334
- going into the for-loop for 0, 3334 and 6668 (3 times as desired)
Maniphest Tasks: T90346
Differential Revision: https://developer.blender.org/D12113
Extend the 'reading error' container to produce the generic short
message in the popup directly visible by the user, and move all detailed
info the `INFO` reports that only show up in the console and Info
editor.
This is an initial implementation of a USD importer.
This work is comprised of Tangent Animation's open source USD importer,
combined with features @makowalski had implemented.
The design is very similar to the approach taken in the Alembic
importer. The core functionality resides in a collection of "reader"
classes, each of which is responsible for converting an instance of a
USD prim to the corresponding Blender Object representation.
The flow of control for the conversion can be followed in the
`import_startjob()` and `import_endjob()` functions in `usd_capi.cc`.
The `USDStageReader` class is responsible for traversing the USD stage
and instantiating the appropriate readers.
Reviewed By: sybren, HooglyBoogly
Differential Revision: https://developer.blender.org/D10700
The file selection parameters (e.g. `context.space_data.params`) are
expected to be unset in certain cases. Reading 2.4 files seems to be one
of them. Hence, code using it should check it's set first. Also added an
assert to a File Browser UI template printing a message when the
parameters are unset, to help debugging the issue.
Only the "changed" state from the last edit-object was used,
this meant the operator would not perform the necessary update
with multi-object edit-mode.
Use "changed" & "changed_multi" naming convention.
Even though lights were part of `SceneStats`, they were not used when
rBfd10ac9acaa0 was committed.
This patch adds the light count back into the statistics. When a light is
the active object, it will display the total number of lights in the
scene, as well as how many lights are currently selected.
{F10141354}
Reviewed By: #user_interface, Severin, Blendify, harley
Maniphest Tasks: T88512
Differential Revision: https://developer.blender.org/D11387
For T78995 we want to change the data structure of keylists to
improve performance. (Probably a Vector with bin-search capabilities).
This patch hides the internal structure of the keylists behind `AnimKeylist`
structure. This allows us to change the internals without 'breaking' where it is
being used.
The change adds functions to create, free, find and walk over the
keylist.
Reviewed By: sybren
Maniphest Tasks: T78995
Differential Revision: https://developer.blender.org/D11974
Currently when dropping an asset the first material slot is always updated.
This patch changes that logic to update the active material slot.
In future the behavior will be updated to use the material slot of the face under the cursor.
That requires better feedback tot he user.
Reviewed By: Severin
Maniphest Tasks: T90372
Differential Revision: https://developer.blender.org/D12056
Setting normals from faces wasn't weighting the faces contribution
by the corner angle, giving lop-sided results in some cases.
This removes the epsilon check for CLNORS_VALID_VEC_LEN,
in favor of matching the behavior of vertex normals exactly.
It will be useful in the spline type conversion node. Theoretically it
could become protected again if that conversion moves out of a node,
which might be a nice improvement after an initial version.
Because mesh vertex and face normals are just derived data, they can
be calculated lazily instead of eagerly. Often normal calculation is
a relatively expensive task, and the calculation is often redundant
if the mesh is deformed afterwards anyway.
Instead, normals should be calculated only when they are needed. This
commit moves in that direction by adding a new function to tag a mesh's
normals dirty and replacing normal calculation with it in some places.
Differential Revision: https://developer.blender.org/D12107
This commit uses OpenVDB more directly for the voxel remesher, without
the extra indirection of copying to a Blender API. This makes the code
simpler, shorter, and easier to understand (though I didn't observe any
performance improvement).
This also removes the rest of the unused and undocumented OpenVDB C API,
which was written when Blender's code didn't really use C++, and doesn't
serve a purpose anymore. Those features will be implemented as nodes in
the future anyway (see D12100).
Differential Revision: https://developer.blender.org/D12097
Caused by rB7fc60bff14a6.
This has actually been reported and closed, but that was clearly a
misunderstanding (above commit changed a checkbox to be an enum, but a
second checkbox was simply removed)
Maniphest Tasks: T78469
Differential Revision: https://developer.blender.org/D12084
This is causing issues for some users launching Blender, because EGL indirectly
requires GLVND, which is not installed by default on e.g. Ubuntu.
This reverts commit 0b18a618b8.
Fixes T90374
Ref D12034
Caused by {rBbbb2e0614fc3}
Since above commit only the playhead is updated as an overlay in
animation playback (was moved out of drawing of the main region for
perfomance reasons).
The driver value "debug" visualization is very useful to have during
playback though but was left in main region drawing as part of
`draw_fcurve` (thus does not update in realtime anymore).
Moving `graph_draw_driver_debug` into the overlay is not feasible
because it requires animation filtering which has significant overhead
which needs to be avoided in the overlay which is redrawn on every UI
interaction.
Now tag the whole main region for updates in the Driver Editor during
playback instead (which will make the Drivers Editor as slow during
playback as before rBbbb2e0614fc3 -- but with realtime updates of the
debug visualization).
Maniphest Tasks: T87041
Differential Revision: https://developer.blender.org/D12003
Add a context menu dedicated to asset operations to the Asset Browser.
There are two separate context menus to keep things separated well and
avoid confusing if-else logic (similar to D12057 & D12059). Their polls
make sure they are displayed for the right contexts only.
Also (to be committed as followup cleanup): Remove now unused special
handling for assets in file delete operator.
Differential Revision: https://developer.blender.org/D12062
So far the Asset Browser just showed the same popups and settings as the
File Browser. Not all of them made sense for the Asset Browser though.
* Don't show inapplicable recursion toggle.
* Don't show sorting options, which don't work with assets anyway.
* Don't show the Filter popover, there are currently no applicable items
in there.
Just like in D12057, I decided to add separate classes for the Asset
Browser case.
Differential Revision: https://developer.blender.org/D12059
So far the Asset Browser just showed the same menus as the File Browser.
Not all of their entries made sense for the Asset Browser though. I
decided to just give them entirely different classes to avoid confusing
if-else checks everywhere. I think the code duplication this adds is a
minor issue, it's better to keep things seperated clearly IMO.
* View menu: Add "Asset Details" toggle for the sidebar region.
* View menu: Remove recursion sub-menu
* View menu: Remove "File Path" region toggle, which doesn't apply for
the Asset Browser.
Differential Revision: https://developer.blender.org/D12057
Originally the operator name was drawn next to the dragging content.
After that there was an option to add custom, static text with the
dragging content. This patch allows dynamic text to be drawn.
The custom text was implemented as out parameter of the poll function
what made the code unclear. This patch introduces a tooltip function
that separates tooltip generation from the poll function.
NOTE: the text should always be returned in its own memory block. This
block will be freed after it is copied in the drag struct.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D12104
`CPPType` can wrap any C++ type so that code can work
with the wrapped type in a generic way. The goal of subclassing
`CPPType` is to provide additional methods for some types.
For example, the `CPPType` for `Array<int>` could have a `.element_type()`
method that returns the `CPPType` for `int`.
Initial, limited implementation of loading a single asset catalog
definition file. These files are structured as follows:
CATALOG_ID virtual/path/of/catalog
SUBCATALOG_ID virtual/path/of/catalog/child
SOMETHING_ELSE some/unrelated/hierarchy
These virtual paths will be used to show the catalog in a tree
structure; the tree structure itself is not part of this commit. Each
asset will have one catalog ID that determines where in that tree the
asset shows up.
Currently only a single catalog definition file can be read; merging
data from multiple such files, and writing them out again after changes
are made, is for future commits.
This commit only contains the code to load a single file, and unittests
to check that this actually works. No UI, no user-facing functionality
yet.
The real fix here is to use some kind of relative error in `customdata_compare`
instead of the absolute error used now. If vertex coordinates get larger in magnitude,
the allowed error should increase as well.
When entering characters using IME on Windows, Japanese and Chinese
will both usually result in the first keystroke being duplicated. The
problem is that we are informed too late, after the first key is
pressed, that we are IME composing. This patch ensures we are entering
non-English characters using ImmGetConversionStatus() and then deals
with editing keys (like arrows and backspace) on a per-language basis.
see D11929 for more details.
Differential Revision: https://developer.blender.org/D11929
Reviewed by Brecht Van Lommel
Retrieving a mesh's looptris now take's a const mesh after
rB5f8969bb4b4, which removes the need for this function.
Since it's only two lines, avoiding the use of a separate function
in this case is simpler.
These functions do not change their source or input mesh, so it can
be passed with const, which means in one case that a function doesn't
have to be responsible for freeing its argument mesh, which is a clearly
better separation of concerns.
By the patch made it in master the version value already advanced (see https://developer.blender.org/D11839), so this versioning code needs to be moved down to that point.
This BMesh iterator hadn't been used in C++ code yet, and needed
a macro for a proper cast. The parameter structs need to be initialized
when declared without designated initializers.
They are now always shown in the top-level of the Outliner context menu.
Having them in the ID Data submenu was just a hassle to work with, and
often confusing to users - even if technically correct (the asset status
is part of the ID data).
Part of T82680.
These operators shouldn't be available in the Asset Browser.
https://developer.blender.org/T83556
Added a comment to each operator poll assignment to explicitly mention
the intention. That should also remind devs to decide if the operator
should apply for both file & asset browsing when copy & pasting operator
definition code.
The operator to drop file paths into the File Browser was just checking
if there's an active window. This wasn't really an issue since the
operator was only used as drop-operator for the File Browser. But the
operator would show up in the operator search. Plus, for asset browsing,
we'll also have to check the file browsing mode, so the more specific
poll function will be needed.
* Early exit instead of complex if-else blocks.
* Avoid iterating over entire file list.
* Use `true`/`false` for boolean values.
* Declare variables in smaller scopes.
The Windows-specific "Register File Association" operator would show in
the search menu of other platforms. Decided to not disable it at
compile-time, like we do it with "Toggle System Console" (another
Windows-only operator), because that would require workarounds for the
translation tools. Instead the operator poll function always returns
false on unsupported platforms now.
The operator was register as a "file" operator, which are by convention
used for File Browser operators only. Move it to the "preferences"
operators, where it's displayed in the UI too.
This partially reverts cb0b017d8f: We can't store the asset handle in
the drag data, because the file pointer it wraps may be freed as the
Asset Browser generates its file list.
In `BKE_appdir.h`, include `<stddef.h>` as that defines `size_t`. This
follows the "include what you use" principle, and makes it possible to
use `BKE_appdir.h` without having to bother with its dependencies.
No functional changes.
Registering a property could remove the existing property,
then fail to parse one of the arguments of the new property -
leaving the struct without a property.
Now freeing the existing property is deferred until immediately
before the new property is registered.
- Use `default` instead of `def` abbreviation.
- Rename `BPYPropArrayLength` to `BPyPropArrayLength`
in keeping with other local structs.
- Remove _PyArg_Parser.fname value accidentally left in
(harmless as it's not used).
Macros were used for expanding shared logic for some properties.
Replace this with Python converters & a funciton that handles
deferred registration.
Add generic converter functions for RNA enums:
- pyrna_enum_value_parse_string
- pyrna_enum_bitfield_parse_set
After doing an import, the bounding box of the stroke was not calculated and any operation related to brushes (Sculpt, Weight Paint and Vertex Paint) was not working as expected because the bounding box of the stroke was wrong.
This problem was solved automatically after any edit operation, but must be solved in the import process.
This commit resolves these RNA warnings:
```
offset: "", WARN (bpy.rna): ...\source\blender\python\intern\bpy_rna.c:1505 pyrna_enum_to_py: current value '65536' matches no enum in 'FloatProperty', 'offset', 'subtype'
project_limit: "", WARN (bpy.rna): ...\source\blender\python\intern\bpy_rna.c:1505 pyrna_enum_to_py: current value '65536' matches no enum in 'FloatProperty', 'project_limit', 'subtype'
falloff_radius: "", WARN (bpy.rna): ...\source\blender\python\intern\bpy_rna.c:1505 pyrna_enum_to_py: current value '65567' matches no enum in 'FloatProperty', 'falloff_radius', 'subtype'
```
This will replace GLX with EGL for X11. GLEW does not support GLX and EGL
at the same time. Most distributions build GLEW with GLX support, so we
have to use the externally provided GLEW and build with EGL support.
This effectively sets WITH_SYSTEM_GLEW to OFF for all Linux configurations.
Differential Revision: https://developer.blender.org/D12034
In the graph editor, Mirror Keys by Value would convert the value to mirror
over, to account for different units for linear & rotational properties.
The conversion was done in the different direction, though, resulting in
values that were too large by a factor of (180/pi)^2.
This caused a blender load error on windows N,
given we do not use these codecs they can safely
be disabled.
This will fix T90200 once the new libraries are
in SVN
It was somewhat arbitrary to have this one pass enabled that adds a bit of
additional memory and render time overhead, even though it's not necessarily
more important than others.
Before this, all asset view templates showing the same asset library
would show the same assets, even if they should show different ID types.
That was a major limitation since the design did forsee that this
template can be put anywhere in the UI to display various sub-sets of
assets.
Initially I did the ID type filtering close to the asset-list reading,
because I wanted to optimize reading so that we would only actually read
asset information from disk of the ID type to be shown. But this will be
quite complex and I'm not sure if I'll get to work on this anytime soon.
So this commit moves the filtering to the template display level solving
this limitation.
Note: This also adds the code to filter by tags, together with the ID
type. But it's not actually used anywhere yet.
This iterator was introduced before `AssetHandle` existed, so it was
dealing with the file data directly. Now we want as little code as
possible to deal with the file data, all access should happen via the
`AssetHandle`.
This has been a huge pain to get working, for several reasons (new flags
needed, patching is now mandatory, etc.).
Further more, discovered that debian OIIO package is now silently
relying on OpenCV, without even proper handling of this dependency (at
least in the `-dev` package), so had to revert to force-build own OIIO
again on that distro for the time being.
Ref. T88438.
When `BLI_task_parallel_mempool` does not use threading, the
`userdata_chunk` is allocated locally simulating a TLS.
However `func_reduce` is not called so the original chunk is ignored.
`task_parallel_iterator_no_threads` is another function that doesn't call
`func_reduce`. It also ignores `userdata_chunk_local` in the main iterator.
The solution in these cases is not to create a `userdata_chunk_local`.
This fixes T90131
Differential Revision: https://developer.blender.org/D12067
We shipped the whole bin folder for llvm/clang
while we only needed clang-format, by shipping
just the bits we need we save about 700 megabytes
off our svn lib download.
The preview was always using frame 1, but maybe the object has changed and it's better create preview using the current frame.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D12018
Motion attributes expects mesh to have non-zero number of motion steps,
which was violated in the case when fluid mesh had motion blur disabled.
This is a bit of annoying fix, because of the order of updates. More
ideal solution would be to handle cached and fluid velocities in the
sync_mesh_motion() which ensures all the dependencies between settings.
Add overlay option to disable grid drawing.
Reuse drawing code from other editors (timeline editor)
Add argument `display_minor_lines` to function
`UI_view2d_draw_lines_x__discrete_frames_or_seconds`
This way minor line drawing can be disabled and so it doesn't cause
too much visual noise. Also spacing seems to be too fine, so VSE uses 3x
what is defined in preferences.
Reviewed By: fsiddi, Severin
Differential Revision: https://developer.blender.org/D11790
Snapping by default goes against convention, so this setting was
re-evaluated. Also snapping by default can conflict with new image
transform system, see T90156
There wasn't consensus, so disable snapping by default to follow
established convention.
ref T89665
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12054
Calculate frequency of time/frame label drawing, such that labels have
at least 10px margin and don't overlap.
Change timecode format:
- Use at least `mm:ss` format
- Don't display frames if all labels would end with +00
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D11792
The channel box selection was offset for grease pencil layers.
This is a proposed fix by @yann-lty
Before:
{F10227973}
After:
{F10227974}
Reviewed By: #grease_pencil, antoniov
Maniphest Tasks: T89952
Differential Revision: https://developer.blender.org/D11962
- Multi-dimensional boolean, int and float vector types are supported.
- A sequence of int's for the "size" is used to declare dimensions.
- Nested sequences are required for default arguments.
Now it's possible to define matrix properties, for e.g:
bpy.props.FloatVectorProperty(size=(4, 4), subtype='MATRIX')
Add array conversion functions that take dimension arguments.
- PyC_AsArray_Multi (version of PyC_AsArray).
- PyC_Tuple_PackArray_Multi_* (version of PyC_Tuple_Pack_*).
When viewing font files in the File Manager, this patch uses the font's
family and style names to show the same type of string shown to users
in operating system lists. For example "Book Antiqua Regular" instead
of "BKANT.ttf"
see D12020 for details and examples.
Differential Revision: https://developer.blender.org/D12020
Reviewed by Campbell Barton and Julian Eisel
WITH_CYCLES_DEBUG was used for rendering BVH debugging passes. But since we
mainly use Embree an OptiX now, this information is no longer important.
WITH_CYCLES_DEBUG_NAN will enable additional checks for NaNs and invalid values
in the kernel, for Cycles developers. Previously these asserts where enabled in
all debug builds, but this is too likely to crash Blender in scenes that render
fine regardless of the NaNs. So this is behind a CMake option now.
Fixes T90240
When using "Clear Asset" from the Asset Browser but with an asset
selected that is not stored in the current file, we can show a more
informative error message.
The viewer node in geometry node trees only supports geometry nodes.
This patch ensures that when ctrl shift clicking on a node, it will only
link to geometry sockets.
Differential Revision: https://developer.blender.org/D12055
This code was actually buggy (forcefully re-enabling excluded layers in some
cases).
Further more, it should not be needed now that layerCollection resync code
reuses as much as possible existing layers instead of deleting and
re-creating them all the time.
Differential Revision: https://developer.blender.org/D12016
The goal of this refactor is to improve resync of LayerCollections
hierarchy to match again Collection one.
Current code would destroy and re-create valid layers whenever a parent
collection would be removed, which leads to losing way too often
layer-related settings when editing collection hierarchies.
While this could be partially addressed from operators side, there was
no way to fix those issues from lower level, more generic ID management
code like ID remapping or library override resync processes.
The new code builds a shallow wrapper around existing (aka old) layers
hierarchy, does a set of checks to define the status of all existing
layers, and try to find the closest matching unused layer in cases where
layers and collections hierarchies do not match anymore.
The intent is to both re-use as much as possible existing layers, and
to pick the 'best' possible layer to re-use, following those heuristics:
* Prefer layers children of current one first (in old hierarchy), and only
use those from other higher-level hierarchies if no (grand-)child is found.
* Prefer to use closest layers available in the old hierarchy.
NOTE: The new code is about 12%-15% slower than the previous one, which is
expected given the increased complexity. Note that this would not be an
issue in practice if this code was not called way too often (needs to
be converted to lazy update instead, which is a long known TODO).
NOTE: The LayerCollectionResync code uses its own built-in version of
FIFO queue, as performances in this code is currently a critical point
(it can get called tens of thousands of times during a single (heavy)
ID management operation currently, in a production file e.g.).
Differential Revision: https://developer.blender.org/D12016
When deleting a node, links attached to that node are deleted, but if one
of those links was connected to a multi input socket, the indices of the
other links connected to it were not updated. This adds updates both in
the case of a normal delete as well as after a delete with reconnect.
Differential Revision: https://developer.blender.org/D11716
Followup to rB3834dc2f7b38 (where getting the proper particle system was
fixed for the Adjust Last Operation panel in the Properties Editor). But
since this operator can also be called from the 3DView, get a current
particle system there as well.
Without this, _all_ particle systems would be copied when executing from
the 3DView (which was never really intended [operator description uses
singular] -- it just happens to use `copy_particle_systems_to_object`
internally as well -- same as the `Copy Active/All to Selected Objects`
operators)).
ref. T83317
Maniphest Tasks: T83317
Differential Revision: https://developer.blender.org/D12033
Caused by {rB8cbff7093d65}.
Since above commit only one modifier would get calculated and the
displaylist boundingbox was calculated wrong.
Maniphest Tasks: T90154
Differential Revision: https://developer.blender.org/D12037
Expand camera effective region to a portion beyond image frame so strokes won't end right at the border.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12049
Recent own rBabf3ce811f6e prevented any LayerCollection update during
the whole liboverride resync process, for both performances and feature
reasons.
However that means that the various runtime caches like the Base GHash
are not cleared anymore during ID remapping process, so we need to call
`BKE_main_collection_sync_remap` instead of `BKE_main_collection_sync`
when we finally are ready for this update.
Reported by @eyecandy (Andy Goralczyk) from Blender studio, thanks!
This patch adds propper tooltips to the effect strips in the "Add" menu.
Note that not all effect strips are actually in the "Effect Strips"
submenu like color strips, text strips or transitions. For these types
of effect strips, a dediacted tooltip is especially useful.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D11714
While transforming a strip, draw the background semi-transparent
if it overlaps with another strip. It's convenient to see what's
underneath, especially with the upcoming Overwrite feature.
Thanks to @iss for the help and review.
Pass `-DLINKSTATIC=ON` to the OSL CMake, to ensure it statically links to
our libpng. Previously this was only applied on Windows, it's now on all
platforms.
Add three functions that trim characters from the front & end of a
`StringRef`. All functions return a new `StringRef` that references a
sub-string of the original `StringRef`.
- `trim(chars_to_remove)`: strips all characters from the start and end
that occur in `chars_to_remove`.
- `trim(char_to_remove)`: same, but with a single character to remove.
- `trim()`: remove leading & trailing whitespace, so same as
`trim(" \r\n\t")`
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D12031
Runs tests based on blend files with minimum python interaction.
Developed as part of GSoC 2021 - Regression Testing of Geometry Nodes.
Earlier, tests were built from scratch by adding a modifier/operation
from the Python API.
Now, tests can also be created inside blender and are compared using
Python script.
Features: Automatically adding expected object if it doesn't exist.
This patch adds tests for the following Geometry Nodes category:
* Curves
* Geometry
* Mesh
* Points
The implemented UML diagram for refactoring of mesh test framework.
{F10225906}
Technical Changes:
SpecMeshTest: It adds the modifier/operation based on the Spec provided.
BlendFileTest: It applies already existing modifier/operation from the blend file.
Test folders hierarchy with tests. This folder should be extracted to `lib\tests\modeling`
{F10240651}
Note: The `geometry_nodes` folder might lie under another `geometry_nodes` folder while extracting, please double check. Use the inner-most one.
The hierarchy should be:
-`lib\tests\modeling\geometry_nodes\mesh`
-`lib\tests\modeling\geometry_nodes\points`
and so on.
* From `ctest` the tests should be run as `ctest -R geo_node -C [Configuration]` on Windows.
* Each single test can be run with its entire name e..g `ctest -R geo_node_geometry_join_geometry`.(just an example). Run `ctest -N -R geo_node` to see all tests.
* From blender, the tests can be run `blender -b path\to\blend\file --python path\to\geo_node_test.py`
Reviewed By: zazizizou, JacquesLucke
Differential Revision: https://developer.blender.org/D11611
Failure to return a list of the expected size & type wasn't
decrementing the value, leaking a reference.
Caused by 127b5423d6 a workaround for the
real error that was fixed f5e020a7a6.
This adds the operator name to the node label which is consistent with the shading nodes.
The vector node has `Vector` as a prefix.
The Attribute nodes already have a different coloured header.
The same label is used when collapsing nodes, this helps readability.
Reviewed By: pablovazquez
Differential Revision: https://developer.blender.org/D10749
Builtbot is switching over from json to yaml. Both
configuration files should be kept in sync for now.
The json file will be removed when everything works as expected.
Ths commit adds a new `IDNameLibMap` to `Main`, used during file reading
to quickly find already read linked IDs.
Without that, search would use string-based search over list of linked
data, which becomes extremely slow and inneficient in cases where a lot
of IDs are linked from a same library. See also {T89194}.
Extrem-usecase reported in T89194 is now about 4 times faster in linked
data reading (about 2 times faster for the whole .blend file loading).
More normal cases (like Sprites studio production files) have barely
measurable speed improvements, a few percents at best.
NOTE: `main_idmap` API was extended to support insertion and removal of
IDs from the mapping, avoids having to re-create the whole thing several
time during libraries expansion in readcode.
Differential Revision: https://developer.blender.org/D11757
Makes it so Render Layers node in the compositor is updated as soon
as Use Denoising is changed for the final render.
Differential Revision: https://developer.blender.org/D12010
This diff somewhat snowballed out of updating OIDN to 1.4.1 it had some
changes that allowed us to remove the arm hacks we had in place and
revert to using identical versions for a whole bunch of deps. But that
required an update to ISPC which needed a newer LLVM and if we're
updating LLVM we may as well update OSL, and when we update OSL, OIIO
may as well be dragged in soo......anyhow...
This diff updates:
LLVM 9.0.0 (11.0.1 for mac/arm) -> 12.0.0
OIIO 2.1.15.0 -> 2.2.15.1
OSL 1.11.10.0 -> 1.11.14.1
winflex_bison 2.5.5-> 2.5.24 (ispc needed newer bison, windows only dep)
OIDN 1.4.0 -> 1.4.1
ISPC v1.14.1(random hash for mac/arm) -> v1.16.0
Flex 2.6.4 (ISPC needed newer Flex than available on CentOS 7)
and removes most of the "special arm/mac" versions. I think just ssl and
embree are left with special versions.
notable changes:
@LazyDodo included some clang headers in the linux/mac harvest which are
needed to start writing custom clang based tooling like D9465 these were
already shipping on windows, but not the other platforms.
[macOS] Change the `LC_ID_DYLIB` of OpenMP for {D11997}. This changes
where the executables look for dylibs.
Reviewed By: sebbas, LazyDodo
Differential Revision: https://developer.blender.org/D11748
This patch fixes occlusion function to handle one specific case (when an edge shares a point with triangle) better,especially when there's overlapping edges in this case.
Previously, this option was not exposed in the UI, only for the clip editor.
There were also multiple rna properties that did the same thing for each of the 2D editors.
There was also an issue where the property enum items were the same as the 3d view which didnt make much sense.
Reviewed By: antoniov
Differential Revision: https://developer.blender.org/D12027
When using a pose slider it is possible to hide bones with the 'H' key.
Before this patch the screen didn't update, so you had to move the mouse 1 pixel to update.
This patch makes it so it updates right away
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D12024
Ref: D12024
Adds full frame implementation to this node operation.
No functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11627
Adds full frame implementation to this node operations.
No functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11749
Adds full frame implementation to this node operations.
No functional changes.
Includes a new operation method `init_data` used to initialize any data
needed after operations are linked and resolutions determined.
Once tiled implementation is removed `initExecution` may be renamed
to `init_rendering` and `init_data` to `init_execution`.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11944
This fixes a performance regression on Ampere cards, on specific scenes like
classroom. For cycles-x there is little difference, but this is still helpful
for LTS releases, and we need to upgrade at some point anyway.
This is an easy & safe, yet not-so-nice way to address the
LayerCollections vs. Collections hierarchy resync problem.
Currently this resync is enforced everytime something changes in the
Collections hierarchy, which is extremely inneficient, and can even
produce 'loss' of LayerCollection data during complex Collection
processes.
Current example is during Library Overrides resync process. New code:
* Makes resync significantly faster (between 10 and 15%).
* Fixes 'disappearing' layer collections settings on sub-collections'
layers.
NOTE: This is not a proper fix for the underlying issue. However,
implementing and testing the 'lazy update' solution as proposed by
{T73411} requires a significant amount of time (especially in testing
and tracking all places where code would need to ensure LayerCollections
are up-to-date), which is not possible currently.
Differential Revision: https://developer.blender.org/D11889
Mantflow only supports wavelet noise, thus the parameter with only one option is no longer useful.
Differential Revision: https://developer.blender.org/D6770
In the draw module, it's not easy to identify what its header is, and
where the shared functions are.
So move `draw_cache_extract_mesh_extractors.c` and
`draw_cache_extract_mesh_private.h` to the same folder as the extractors
and rename these files to make them more identifiable.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11991
Fix hold offset check causing missing snapping point when strip have
only still frames.
Fix effect strips of transformed strips causing snapping to prevoius
strip positions.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11948
Label for snapping current frame to strips was cut off and not very readable.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D11951
Cached OCIO processors were not freed, instead the color spaces were freed twice.
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D12011
Fix for T85517
Bug: Couldn't type space while holding down the shift key in text spaces (e.g. when saving a file, changing the name of object).
Changes: Removing the key combination of Shift + space in `WM_event_is_ime_switch` method.
Reviewed By: harley, mont29
Maniphest Tasks: T85517
Differential Revision: https://developer.blender.org/D10452
Six years ago, Bug T44961 about unwanted spikes had me not do a loop
slide if the angle was too extreme, to avoid unwanted spikes.
The current bug showed that that angle was much too big, and limited
desired behavior in many cases. Changing the angle from 0.25 radians
to 0.0001 radians (about 0.006 degrees) still fixes the original bug
and seems very unlikely to be limiting desired behavior now.
The old modifier code, now just used for Fast, has code in it to
flip faces of arguments when their tranform's negativity differs
from the main object's transform's negativity.
I had neglected to put that logic in when I made the change that
skipped the round trip through BMesh.
Fixing this means that the results are more what the user expects
when some or all operands have negative scales.
Itwillsoonbeusedby the ../utils/make_update.pyscript.
The file allows to set branches or specific commits for both git submodules and svn artifacts. Can also define various build package versions for use by build workers. Especially useful in experimental and release branches.
@@ -240,6 +245,7 @@ class CyclesRenderSettings(bpy.types.PropertyGroup):
description="Feature set to use for rendering",
items=enum_feature_set,
default='SUPPORTED',
update=update_render_engine,
)
shading_system:BoolProperty(
name="Open Shading Language",
@@ -263,6 +269,7 @@ class CyclesRenderSettings(bpy.types.PropertyGroup):
name="Use Denoising",
description="Denoise the rendered image",
default=False,
update=update_render_passes,
)
use_preview_denoising:BoolProperty(
name="Use Viewport Denoising",
@@ -401,7 +408,7 @@ class CyclesRenderSettings(bpy.types.PropertyGroup):
adaptive_threshold:FloatProperty(
name="Adaptive Sampling Threshold",
description="Noise level step to stop sampling at, lower values reduce noise the cost of render time. Zero for automatic setting based on number of AA samples",
description="Noise level step to stop sampling at, lower values reduce noise at the cost of render time. Zero for automatic setting based on number of AA samples",
min=0.0,max=1.0,
default=0.0,
precision=4,
@@ -1163,12 +1170,6 @@ class CyclesVisibilitySettings(bpy.types.PropertyGroup):
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
