Basicaly the idea is to have a C++ class to better manage the runtime
tree element storage and access.
This branch doesn't even compile yet, it's just an early experiment so
far that I don't only want to keep locally.
From re-checking related code, it seems that we already always ensure
consistency of the `lib` pointer between embedded IDs and their owners.
This commit only adds some asserts in ambedded ID read code to
double-check this.
Note that there are still some references to proxies left, in some cases
it's unclear if the code related to the comment is even still relevant,
this goes beyond mere cleanup to address then.
It turns out upon close inspection that the 'deform only' mesh
only includes leading deform modifiers, rather than all of them
like crazyspace evaluation. This reduces the effect of the change
in rB9823a8f72be8 to using the fully evaluated mesh (all modifiers)
when the whole stack resulted in no topology change.
- Reduce variable scope.
- Use snake-case for variables.
- Remove unnecessary counter when building file-list.
- Remove break after return.
- Use early return.
- Add missing braces.
Use `verts` instead of `vertices` and `polys` instead of `polygons`
in the API added in 05952aa94d. This aligns better with
existing naming where the shorter names are much more common.
Adds a new operator to automatically rotate UV Islands into alignment.
Modes:
* Auto (All edges)
* Geometry (V direction will point in geometry direction) [1]
* Edge (Rotate until selected edge is in V direction)
Also adds uv_sync_selection support to UV Randomize Transform.
Resolves: T78399
Differential Revision: https://developer.blender.org/D15820
[1] Listed as "World" in Task description.
- Use pascel-case type names, instead of snake-case with `_t` suffix.
- Use `GWL_` prefix (short for GhostWayLand), to distinguish these
types from ghost (`GHOST_*`) and wayland (`wl_*`) types.
- Rename `input` to `seat` (following wayland's own terminology).
- Use `wl_` prefix for wayland native variables which have locally
defined equivalents so `GWL_Output *output` isn't confused with
`struct wl_output *wl_output`. As the locally defined types are used
more often this is less verbose overall.
Note that lib_override functions have kept the unused argument,
but this may be removed too. It impacts many lib_override functions
so this can be handled separately.
This commit is a big overhaul to the Mikktspace module, which is used
to compute tangents. I'm not calling it a rewrite since it's the
result of a lot of iterations on the original code, but pretty much
everything is reworked somehow.
Overall goal was to a) make it faster and b) make it maintainable.
Notable changes:
- Since the callbacks for requesting geometry data were a big
bottleneck before, I've ported it to C++ and made it header-only,
templating on the data source. That way, the compiler generates code
specific to the caller, which allows it to inline the data source and
specialize for some cases (e.g. subd vs. non-subd in Cycles).
- The one input parameter, an optional angle threshold, was not used
anywhere. Turns out that removing it allows for considerable
algorithmic simplification, removing a lot of the complexity in the
later stages. Therefore, I've just removed the option in the new code.
- The code computes several outputs, but only one (the tangent itself)
is ever used in Blender. Therefore, I've removed the others to
simplify the code. They could easily be brought back if needed, none
of the algorithmic simplifications are conflicting with them.
- The original code had fallback paths for many steps in case temporary
memory allocation fails, but that never actually gets used anyways
since malloc() doesn't really ever return NULL in practise, so I
removed them.
- In general, I've restructured A LOT of the code to make the
algorithms clearer and make use of some C++ features (vectors,
std::array, booleans, classes), though there's still some of cleanup
that could be done.
- Parallelized duplicate detection, neighbor detection, triangle
tangent computation, degenerate triangle handling and tangent space
accumulation.
- Replaced several algorithms with faster equivalents: Duplicate
detection uses a (concurrent) hash set now, neighbor detection uses
Radixsort and splits vertices by index pairs etc.
As for results, the exact speedup depends on the scene of course, but
let's consider the file from T97378:
- Blender 3.1 (before D14675): 6.07sec
- Blender 3.2 (with D14675): 4.62sec
- rBf0a36599007d (last nightly build): 4.42sec
- With this commit: 0.90sec
This speedup will mostly be noticed at the start of Cycles renders and,
even more importantly, in Eevee when doing something that changes the
geometry (e.g. animating) on a model using normal maps.
Differential Revision: https://developer.blender.org/D15589
This changes the two tangent-related files in BKE to C++ in preparation for the C++ Mikktspace port in D15589.
For now, they still use the original Mikktspace.
Differential Revision: https://developer.blender.org/D15636
The `mvert` pointer was passed to `bm_to_mesh_shape` and was never
reset to the beginning of the vertex array. Use spans instead to
eliminate this error completely. This also has the benefit of letting
the CustomData system handle allocation of mesh layers.
3484c6d4f1 removed parts of 6e5eb46d73 by mistake,
returning no attribute when attribute data wasn't found. However, we
want that attributes can exist even on empty geometry. This commit
restores the fix and tries to make it more explicit to avoid the same
mistake again.
Differential Revision: https://developer.blender.org/D15899
The constraint attempted to access mesh normals on a mesh with
wrapper type ME_WRAPPER_TYPE_BMESH. This commit reverses the if
statements so that If there is an editmesh then we use that as the
source of truth - otherwise use the evaluated mesh.
Differential Revision: https://developer.blender.org/D15809
It's easier to keep track of state in these algorithms if it's stored in
a central place like a set. Plus, using flags requires clearing them
beforehand. For the selected linked operators, using the topology
cache means we don't have to iterate over all links.
Before 58c650a44c, the nodes span was rebuilt on every redraw. Now
that it's only rebuilt as necessary, we need to tag it dirty when nodes
are reordered. Relying on the order of the nodes at all isn't ideal, but
it's fairly fundamental in many areas at the moment.
The recent revert of Apple silicon inlining changes to avoid long compile times
worked on macOS 12, but in macOS 13 Beta it results in render errors. This may
be a compiler bug and perhaps get fixed in time, but try to be on the safe side
and ensure Blender 3.3.0 works regardless.
This brings part of the inlining back, which brings improved performance but
also longer compiler times again. Compile time is around 2min now, where the
previous full inlining was about 5-7min.
Patch by Michael Jones.
Differential Revision: https://developer.blender.org/D15897
Do not allow the loading of old-style non-scalable fonts.
See D15884 for more details.
Differential Revision: https://developer.blender.org/D15884
Reviewed by Brecht Van Lommel
Many existing .blend files (including startup ones) seem to have invalid
embedded IDs (they are not properly tagged with `LIB_EMBEDDED_DATA`).
We cannot `do_version` this so just fix it on the fly when detecting the
issue. User then need to re-save these files.
We also need to update some release files (default factory startup is
OK, but e.g. the VSE template one is not).
Keeping the assert is important here, as such missing flag is a critical
data corruption that can potentially have many serious consequences
throughout the ID management code.
A `blender::Pool` can construct and destruct elements without reordering. Freed items memory
will be reused by next allocations.
Elements are allocated in chunks to reduce memory fragmentation and avoid reallocation.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D15894
Completely forgot in rBcd49fee74114 to handle the owner ID copying case
(this code now also needs to re-assign to `owner_id` pointer of the
newly copied embedded IDs to their rightful owner).
In 8cf52e8226 we assumed that the UV IBO's are only needed in edit mode,
however the UV lines also need to work in texture paint mode. So prefer to
use bmesh when available to fix the original bug, but don't assume the face
is hidden when there is no bmesh.
Differential Revision: https://developer.blender.org/D15895
Caused by {rB31365c6b9e4c}.
The new API `CustomDataAttributeProvider` just did not support
`CD_MASK_PROP_STRING`.
While strings dont perform nicely in their current form, still add
support back for the API.
Adding Strings to the supported types seems to survive just
fine, see attached example file.
Maniphest Tasks: T100747
Differential Revision: https://developer.blender.org/D15851
Otherwise we disable this feature. This is because some driver
does not support any vertex storage buffers but still support
8 ssbo in fragment shader.
Enables a feature flag during OpenGL device initialisation on macOS, which increases the available number of texture samplers available for use within shaders. Enabling this flag removes purple rendering artifacts present in certain EEVEE materials, when the existing limit of 16 is exceeded.
This feature flag is supported on Apple Silicon and AMD GPUs, for devices supporting macOS 11.0+. Device initialisation first tests whether GL device creation with the flag is supported, if not, we fall back to standard initialisation.
Other solutions would not be trivial or incur additional performance overhead or feature limitations. Other workarounds, such as texture atlas's, could already be created by artists.
{F13245498}
{F13245497}
Reviewed By: jbakker
Maniphest Tasks: T57759, T63935
Differential Revision: https://developer.blender.org/D15336
The only difference between `GPU_SHADER_2D_LINE_DASHED_UNIFORM_COLOR`
and `GPU_SHADER_3D_LINE_DASHED_UNIFORM_COLOR` is that in the vertex
shader the 2D version uses `vec4(pos, 0.0, 1.0)` and the 3D version
uses `vec4(pos, 1.0)`.
But VBOs with 2D attributes work perfectly in shaders that use 3D
attributes. Components not specified are filled with components from
`vec4(0.0, 0.0, 0.0, 1.0)`.
So there is no real benefit to having two different shader versions.
The only real difference between `GPU_SHADER_2D_SMOOTH_COLOR` and
`GPU_SHADER_3D_SMOOTH_COLOR` is that in the vertex shader the 2D
version uses `vec4(pos, 0.0, 1.0)` and the 3D version uses
`vec4(pos, 1.0)`.
But VBOs with 2D attributes work perfectly in shaders that use 3D
attributes. Components not specified are filled with components from
`vec4(0.0, 0.0, 0.0, 1.0)`.
So there is no real benefit to having two different shader versions.
This will simplify porting shaders to python as it will not be
necessary to use a 3D and a 2D version of the shaders.
In python the new name for '2D_SMOOTH_COLOR' and '3D_SMOOTH_COLOR'
is 'SMOOTH_COLOR', but the old names still work for backward
compatibility.
The only real difference between `GPU_SHADER_2D_IMAGE` and
`GPU_SHADER_3D_IMAGE` is that in the vertex shader the 2D
version uses `vec4(pos, 0.0, 1.0)` and the 3D version uses
`vec4(pos, 1.0)`.
But VBOs with 2D attributes work perfectly in shaders that use 3D
attributes. Components not specified are filled with components from
`vec4(0.0, 0.0, 0.0, 1.0)`.
So there is no real benefit to having two different shader versions.
This will simplify porting shaders to python as it will not be
necessary to use a 3D and a 2D version of the shaders.
In python the new name for '2D_IMAGE' and '3D_IMAGE'
is 'IMAGE', but the old names still work for backward
compatibility.
The only real difference between `GPU_SHADER_2D_FLAT_COLOR` and
`GPU_SHADER_3D_FLAT_COLOR` is that in the vertex shader the 2D
version uses `vec4(pos, 0.0, 1.0)` and the 3D version uses
`vec4(pos, 1.0)`.
But VBOs with 2D attributes work perfectly in shaders that use 3D
attributes. Components not specified are filled with components from
`vec4(0.0, 0.0, 0.0, 1.0)`.
So there is no real benefit to having two different shader versions.
This will simplify porting shaders to python as it will not be
necessary to use a 3D and a 2D version of the shaders.
In python the new name for '2D_FLAT_COLOR'' and '3D_FLAT_COLOR'
is 'FLAT_COLOR', but the old names still work for backward
compatibility.
The only real difference between `GPU_SHADER_2D_UNIFORM_COLOR` and
`GPU_SHADER_3D_UNIFORM_COLOR` is that in the vertex shader the 2D
version uses `vec4(pos, 0.0, 1.0)` and the 3D version uses
`vec4(pos, 1.0)`.
But VBOs with 2D attributes work perfectly in shaders that use 3D
attributes. Components not specified are filled with components from
`vec4(0.0, 0.0, 0.0, 1.0)`.
So there is no real benefit to having two different shader versions.
This will simplify porting shaders to python as it will not be
necessary to use a 3D and a 2D version of the shaders.
In python the new name for '2D_UNIFORM_COLOR'' and '3D_UNIFORM_COLOR'
is 'UNIFORM_COLOR', but the old names still work for backward
compatibility.
Differential Revision: https://developer.blender.org/D15836
Minimum horizontal area size should be scaled by UI resolution.
See D15865 for more details.
Differential Revision: https://developer.blender.org/D15865
Reviewed by Brecht Van Lommel
For copy-on-write, we want to share attribute arrays between meshes
where possible. Mutable pointers like `Mesh.mvert` make that difficult
by making ownership vague. They also make code more complex by adding
redundancy.
The simplest solution is just removing them and retrieving layers from
`CustomData` as needed. Similar changes have already been applied to
curves and point clouds (e9f82d3dc7, 410a6efb74). Removing use of
the pointers generally makes code more obvious and more reusable.
Mesh data is now accessed with a C++ API (`Mesh::edges()` or
`Mesh::edges_for_write()`), and a C API (`BKE_mesh_edges(mesh)`).
The CoW changes this commit makes possible are described in T95845
and T95842, and started in D14139 and D14140. The change also simplifies
the ongoing mesh struct-of-array refactors from T95965.
**RNA/Python Access Performance**
Theoretically, accessing mesh elements with the RNA API may become
slower, since the layer needs to be found on every random access.
However, overhead is already high enough that this doesn't make a
noticible differenc, and performance is actually improved in some
cases. Random access can be up to 10% faster, but other situations
might be a bit slower. Generally using `foreach_get/set` are the best
way to improve performance. See the differential revision for more
discussion about Python performance.
Cycles has been updated to use raw pointers and the internal Blender
mesh types, mostly because there is no sense in having this overhead
when it's already compiled with Blender. In my tests this roughly
halves the Cycles mesh creation time (0.19s to 0.10s for a 1 million
face grid).
Differential Revision: https://developer.blender.org/D15488
This reverts commit 32d4a67017 thus fixing T81002 again.
And in order not to break T81212 (again) a different fix was implemented.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D15840
Add a dedicated `owner_id` pointer to ID types that can be embedded
(Collections and NodeTrees), and modify slightly come code to make
handling those more safe and consistent.
This implements first part of T69169.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D15838
The per-keymap user preferences messages were not extracted. This goes
through the keymap preferences RNA, as well as Python files for UI.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15871
When saving, the default file name is "untitled" regardless of
selected language. This can be translated, like many graphical
applications do.
This applies to:
- blend file
- alembic file
- collada file
- obj file
- usd file
- rendered image
- grease pencil export
- subtitles export
- other Python exports through ExportHelper
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15868
- Use the proper context (Operator, since that is what the cursor
keymap status uses)
- Add a few missing message extraction tags
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15867
This function allows to set the start point for cyclic strokes.
The function is required by a new modifier and operator
that are currently under development.
The new code was not using the correct default attribute. Add access to
`g_data.P` through `node_tex_coord_position()` to replace the old
`GPU_builtin(GPU_VIEW_POSITION)` which was used before.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D15862
It was using normalized vector instead of `viewCameraVec` which account for
orthographic views.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D15861
The multi-socket input sorting was used for two purposes: moving links
to the proper positions when dragging a new link, and resetting the
multi-input indices on the links when removing a link. They are now
separated into two functions, and the sorting when making a group
node that didn't accomplish anything is removed (in that case a
proper implementation would copy the indices from the original
exterior sockets).
The previous implementation iterated over all links multiple times
recursively. Instead, use the node tree topology cache, only iterate
over all links once, and use a stack to propagate the mute upsteam
and downstream.
Use C++ Map that supports the duplication natively. Use vectors instead
of linked lists, and adjust naming. Also remove combination of reroutes
for input sockets, which doesn't make sense since a reroute isn't
allowed to combine multiple input links into one output.
Caused by {rB3f3d82cfe9ce}
Since above commit, a `uiRNACollectionSearch` may contain a NULL
`search_prop`, crashing the menu entry for "Jump To Target"
(`ui_jump_to_target_button_poll`).
Now safeguard against this with a NULL check (getting search callbacks
to work for "Jump To Target" can be investigated in master).
Maniphest Tasks: T100731
Differential Revision: https://developer.blender.org/D15832
Since above commit, `BKE_id_attributes_active_get` would also return
"internal" attributes like ".hide_poly" or ".hide_vert".
As a consequence, a couple of poll functions dont return false anymore
(attribute remove, attribute convert), allowing these operators to
execute, but acting on this "internal" layers is just asking for
trouble.
In the UI, we dont see these attributes, because `MESH_UL_attributes`
checks `is_internal`, same thing we do now in
`BKE_id_attributes_active_get`.
Maniphest Tasks: T100687
Differential Revision: https://developer.blender.org/D15833
The location of a reroute node and its sockets should be the same,
only stored in different coordinate spaces. Because the node's location
is the ground truth, use that for finding whether the mouse is hovering.
Now dragged handles are handled separately, and the function returns a
statically sized array by value. The functions are also renamed to be
more consistent with curve naming elsewhere in Blender.
Changes to the text caret (cursor) when editing Text objects in the
3D Viewport.
See D15797 for more details and examples.
Differential Revision: https://developer.blender.org/D15797
Reviewed by Brecht Van Lommel
Previously for most materials (especially the ones without any
textures), the nodes were "off screen" way to the right, requiring
a view framing to even see them.
Also, as soon as multiple images were used, many nodes overlapped
one another and the connections were all a mess.
Simplify all that, and now each node type (coordinate, mapping, image,
normal map, bsdf etc.) is in it's own column, with BSDF at zero
coordinate. Each used image (along with any possible coordinate,
mapping, normal map) is it's own row. The resulting connections
are much cleaner.
Replacement of our Hebrew font, which has bad variable weight default.
See D15846 for more details.
Differential Revision: https://developer.blender.org/D15846
Reviewed by Brecht Van Lommel
This replaces the direct shader uniform layout declaration by a linear
search through a global buffer.
Each instance has an attribute offset inside the global buffer and an
attribute count.
This removes any padding and tighly pack all uniform attributes inside
a single buffer.
This would also remove the limit of 8 attribute but it is kept because of
compatibility with the old system that is still used by the old draw
manager.
Reversing Bezier handle types and positions would skip the middle point
of curves with an odd number of segments, which is still necessary to
swap in order to avoid changing the curve's shape.
This is a new implementation of the draw manager using modern
rendering practices and GPU driven culling.
This only ports features that are not considered deprecated or to be
removed.
The old DRW API is kept working along side this new one, and does not
interfeer with it. However this needed some more hacking inside the
draw_view_lib.glsl. At least the create info are well separated.
The reviewer might start by looking at `draw_pass_test.cc` to see the
API in usage.
Important files are `draw_pass.hh`, `draw_command.hh`,
`draw_command_shared.hh`.
In a nutshell (for a developper used to old DRW API):
- `DRWShadingGroups` are replaced by `Pass<T>::Sub`.
- Contrary to DRWShadingGroups, all commands recorded inside a pass or
sub-pass (even binds / push_constant / uniforms) will be executed in order.
- All memory is managed per object (except for Sub-Pass which are managed
by their parent pass) and not from draw manager pools. So passes "can"
potentially be recorded once and submitted multiple time (but this is
not really encouraged for now). The only implicit link is between resource
lifetime and `ResourceHandles`
- Sub passes can be any level deep.
- IMPORTANT: All state propagate from sub pass to subpass. There is no
state stack concept anymore. Ensure the correct render state is set before
drawing anything using `Pass::state_set()`.
- The drawcalls now needs a `ResourceHandle` instead of an `Object *`.
This is to remove any implicit dependency between `Pass` and `Manager`.
This was a huge problem in old implementation since the manager did not
know what to pull from the object. Now it is explicitly requested by the
engine.
- The pases need to be submitted to a `draw::Manager` instance which can
be retrieved using `DRW_manager_get()` (for now).
Internally:
- All object data are stored in contiguous storage buffers. Removing a lot
of complexity in the pass submission.
- Draw calls are sorted and visibility tested on GPU. Making more modern
culling and better instancing usage possible in the future.
- Unit Tests have been added for regression testing and avoid most API
breakage.
- `draw::View` now contains culling data for all objects in the scene
allowing caching for multiple views.
- Bounding box and sphere final setup is moved to GPU.
- Some global resources locations have been hardcoded to reduce complexity.
What is missing:
- ~~Workaround for lack of gl_BaseInstanceARB.~~ Done
- ~~Object Uniform Attributes.~~ Done (Not in this patch)
- Workaround for hardware supporting a maximum of 8 SSBO.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D15817
This was an oversight as the matrix multiplication present in original
code was reversed.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D15858
This was caused by un-wanted normalization. This is a requirement of
the MikkTspace. The issue is that g_data.N is expected to be normalized
by many other functions and overriden by bump displacement.
Adding a new global variable containing the interpolated normal fixes the
issue AND make it match cycles behavior better (mix between bump and
interpolated normal).
Workaround the issue by adding an intermediate function. This is usually
the case when working with attributes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D15860
This uses the same sample classification approach as used for PMJ,
because it turns out to also work equally well with Sobol-Burley.
This also implements a fallback (random classification) that should
work "okay" for other samplers, though there are no other samplers
at the moment.
Differential Revision: https://developer.blender.org/D15845
This patch implements the dilate/erode node for the realtime compositor.
Differential Revision: https://developer.blender.org/D15790
Reviewed By: Clement Foucault
Since rB6269d66da, creating formats no longer depends solely on the
shader, but now depends on the dimensions used to fill the VBOs.
This allows 3D shaders to work flawlessly when assigned dimensions are
2D.
So there's no real benefit to us having shaders that are limited to 2D
use anymore.
This limitation makes it difficult to implement other builtin shaders
as they indirectly require a 2D version.
So this commit removes the 2D versions of the builtin sahders used in
Python , renames the string enums but keeps the old enums working for
backward compatibility.
(This brings parts of the changes reviewed in D15836).
This particular GPU driver does not constant fold all the way in order
to discard the unused branches.
To workaround that, we introduce a series of material flag that generates
defines that only keep used branches.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D15852
Upcoming cryptomatte patch would need access to these defines. So moving
them from film_lib to shader shared. We cannot include the film_lib as
it requires images/textures to be bound that we don't need.
At the same time fixes incorrect casing (`lAYER` => `LAYER`).
Full support for translation and compilation of shaders in Metal, using
GPUShaderCreateInfo. Includes render pipeline state creation and management,
enabling all standard GPU viewport rendering features in Metal.
Authored by Apple: Michael Parkin-White, Marco Giordano
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D15563
- Adding in compatibility paths to support minimum per-vertex strides for vertex formats. OpenGL supports a minimum stride of 1 byte, in Metal, this minimum stride is 4 bytes. Meaing a vertex format must be atleast 4-bytes in size.
- Replacing transform feedback compile-time check to conditional look-up, given TF is supported on macOS with Metal.
- 3D texture size safety check added as a general capability, rather than being in the gl backend only. Also required for Metal.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D14510
Implementation also contains a number of optimisations and feature enablements specific to the Metal API and Apple Silicon GPUs.
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D15369
As pointed out in D15827 comment, the unique_ptr usage in
ShaderNodetreeWrap related code does not sound very useful. Looking at
it, whole ShaderNodetreeWrap does not make much sense - it's only
ever created, and then immediately just one thing is fetched from it.
This very much sounds like "a function", so make it just that -
header file contains just a `create_mtl_node_tree` function, and the
whole implementation is hidden from the users. Which I've also
simplified into just a handful of freestanding functions.
No functionality or performance changes, but the code does get ~80
lines shorter.
Several visual tweaks to node links to make them overall fit in
better with the look of the node editor:
- Change the link thickness with the zoom level to a certain degree.
- Remove the fuzziness of the node link and its shadow/outline.
- The link outline color can now be made transparent.
- Add circles at the end of dragged links when connecting to sockets.
- Improve the banding of the color interpolation along the link.
- Adjust the spacing of dashes along straight node links.
Reviewed By: Pablo Vazquez, Hans Goudey
Differential Revision: http://developer.blender.org/D15036
The material indices have been moved out of MPoly since f1c0249f34.
That conversion happens in file reading code currently, so the material
indices have to be accessed the new way everywhere.
Fixes issues in importers written in C++ (T100737):
- Materials had one reference count too much. Affected Collada,
Alembic, USD, OBJ importers, looks like "since forever".
- Active material index was not properly set on imported meshes.
Regression since 3.3 (D15145). Affected Alembic, USD, OBJ. Note:
now it sets the first material as the active one, whereas
previously the last one was set as active. First one sounds more
"intuitive" to me.
Reviewed By: Bastien Montagne
Differential Revision: https://developer.blender.org/D15831
The "set default" callback doesn't need to be defined since it falls
back to clearing the memory, but since "construct" is optional, it
needs to be defined. Mistake in 25237d2625.
Blender may not apply certain UI data changes immediately when done via BPY.
This is a rather typical gotcha, better to have it documented.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D15614
The multi-dimensional Sobol pattern required us to carefully use as low
dimensions as possible, as quality goes down in higher dimensions. Now that we
have two sampling patterns that are at least as good, there is no need to keep
it around and the implementation can be simplified.
Differential Revision: https://developer.blender.org/D15788
Fix two issues in the previous implementation:
* Only power-of-two prefixes were progressively stratified, not suffixes.
This resulted in unnecessarily increased noise when using non-power-of-two
sample counts.
* In order to try to get away with just a single sample pattern, the code
used a combination of sample index shuffling and Cranley-Patterson rotation.
Index shuffling is normally fine, but due to the sample patterns themselves
not being quite right (as described above) this actually resulted in
additional increased noise. Cranley-Patterson, on the other hand, always
increases noise with randomized (t,s) nets like PMJ02, and should be avoided
with these kinds of sequences.
Addressed with the following changes:
* Replace the sample pattern generation code with a much simpler algorithm
recently published in the paper "Stochastic Generation of (t, s) Sample
Sequences". This new implementation is easier to verify, produces fully
progressively stratified PMJ02, and is *far* faster than the previous code,
being O(N) in the number of samples generated.
* It keeps the sample index shuffling, which works correctly now due to the
improved sample patterns. But it now uses a newer high-quality hash instead
of the original Laine-Karras hash.
* The scrambling distance feature cannot (to my knowledge) be implemented with
any decorrelation strategy other than Cranley-Patterson, so Cranley-Patterson
is still used when that feature is enabled. But it is now disabled otherwise,
since it increases noise.
* In place of Cranley-Patterson, multiple independent patterns are generated
and randomly chosen for different pixels and dimensions as described in the
original PMJ paper. In this patch, the pattern selection is done via
hash-based shuffling to ensure there are no repeats within a single pixel
until all patterns have been used.
The combination of these fixes brings the quality of Cycles' PMJ sampler in
line with the previously submitted Sobol-Burley sampler in D15679. They are
essentially indistinguishable in terms of quality/noise, which is expected
since they are both randomized (0,2) sequences.
Differential Revision: https://developer.blender.org/D15746
Use lowercase rgba channel names which still by-passes lossy nature
of DWA compression and which also keeps external compositing tools
happy.
Thanks Steffen Dünner for testing this patch!
Differential Revision: https://developer.blender.org/D15834
The old way of creating shaders is being replaced by using
`GPUShaderCreateInfo` for more portability.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D14634
With the new `attrs_info_get` method, we can get information about
the attributes used in a `GPUShader` and thus have more freedom in the
automatic creation of `GPUVertFormat`s
Reviewed By: fclem, campbellbarton
Differential Revision: https://developer.blender.org/D15764
The DWA compression code in OpenEXR has hardcoded rules which decides
which channels are lossy or lossless. There is no control over these
rules via API.
This change makes it so channel names of xyzw is used for cryptomatte
passes in Cycles. This works around the hardcoded rules in the DWA code
making it so lossless compression is used. It is important to use lower
case y channel name as the upper case Y uses lossy compression.
The change in the channel naming also makes it so the write code uses
32bit for the cryptomatte even when saving half-float EXR.
Fixes T96933: Cryptomatte layers saved incorrectly with EXR DWA compression
Fixes T88049: Cryptomatte EXR Output Bit Depth should always be 32bit
Differential Revision: https://developer.blender.org/D15823
An ID created with regualr ID management code should never ever be
directly freed directly.
For embedded nodetrees, there is a dedicated function.
Reviewed By: aras_p
Differential Revision: https://developer.blender.org/D15827
Leading to excessive memory usage compared to Blender 2.93. There's still
some avoidable memory usage remaining, due to the full float buffer in the
new image editor drawing and not loading the cached EXR from disk in tiles.
Main difficulty was handling multi-image baking and disk caches, which is
solved by associating a unique layer name with each image so it can be
matched when reading back the image from the disk.
Also some minor header changes to be able to use RE_MAXNAME in RE_bake.h.
These few lines making a copy of the final mesh were confusing.
The goal (I'm fairly certain) is to make sure the cage mesh and final
mesh aren't shared when applying the vertex coordinates to the final
mesh. This can be done more simply though, in a way that avoids
duplicating the final mesh if it already isn't shared.
This works well in some basic tests with different modifiers. Though
I doubt it was really a bottleneck anywhere, simplifying the modifier
stack internals is always nice.
Differential Revision: https://developer.blender.org/D15814
Push the const usage a bit further for compositor nodes, so that they
are more explicit about not modifying original nodes from the editor.
Differential Revision: https://developer.blender.org/D15822
If the RNA path of a Single Property variable goes through a pointer
to a different ID, the property should be attached to that ID using
the owner reference in the RNA pointer. This already happened when
building some, but not all of the relations and nodes.
This patch fixes the remaining cases.
Differential Revision: https://developer.blender.org/D15323
The viewport compositor crashes when it is disabled then enabled after
the compositor node tree is edited.
This happens because the compositor engine uses the view_update callback
of the draw engine type to detect changes in the node tree and reset its
state for future evaluation. However, the draw manager only calls the
view_update callback for enabled engines, so the compositor never
receives the needed updates to properly reset its state and then crashes
at draw time.
This patch call the view_update callback for all registered engines
regardless if they are enabled or not, that way, they always receive
the potentially important updated needed to maintain a correct state.
Aside from the compositor engine, this change affects the EEVEE and
Workbench engines because they are the only engines that utilizes this
callback. However, both of them only reset a flag that is checked at
draw time. So the change should have no side effects. For the EEVEE
engine, we just add a null check in case it was not instanced, while
Workbench already have the appropriate null check.
Differential Revision: https://developer.blender.org/D15821
Reviewed By: Clement Foucault
This patch moves material indices from the mesh `MPoly` struct to a
generic integer attribute. The builtin material index was already
exposed in geometry nodes, but this makes it a "proper" attribute
accessible with Python and visible in the "Attributes" panel.
The goals of the refactor are code simplification and memory and
performance improvements, mainly because the attribute doesn't have
to be stored and processed if there are no materials. However, until
4.0, material indices will still be read and written in the old
format, meaning there may be a temporary increase in memory usage.
Further notes:
* Completely removing the `MPoly.mat_nr` after 4.0 may require
changes to DNA or introducing a new `MPoly` type.
* Geometry nodes regression tests didn't look at material indices,
so the change reveals a bug in the realize instances node that I fixed.
* Access to material indices from the RNA `MeshPolygon` type is slower
with this patch. The `material_index` attribute can be used instead.
* Cycles is changed to read from the attribute instead.
* BMesh isn't changed in this patch. Theoretically it could be though,
to save 2 bytes per face when less than two materials are used.
* Eventually we could use a 16 bit integer attribute type instead.
Ref T95967
Differential Revision: https://developer.blender.org/D15675
sycl/L0 runtime reports compute-runtime version since Intel graphics
driver 101.3268 on Windows, when querying driver version from sycl.
Prior to this driver, it was 0. Now we can bump minimum requirement to
this one and filter-out devices returning 0.
Maniphest Tasks: T100648
This change makes it so that objects which are temporary hidden from
the viewport (the icon toggle in outliner) do not affect on the
performance of the viewport.
The attached file demonstrates the issue. Before this change hiding
the object does not change FPS, after this change FPS goes high when
the object is hidden.
F13435936
Changing the object temporary visibility is already expected to tag
scene for bases updates, which flushes down the stream to the object
visibility update. So the only remaining topic was to ensure the
graph does a special round of visibility update on such changes.
Differential Revision: https://developer.blender.org/D15813
While it is hard to measure the performance impact accurately, there
is no need to perform per-modifier string lookup on every frame update.
Implemented as an exceptional case in the code which flushes updates to
the entire component. Sounds a bit suboptimal, but there are already
other exception cases handled in the function.
Differential Revision: https://developer.blender.org/D15812
From the 3DView code has basically no knowledge of collection hierarchy,
so we can either not remap any local usage of linked objects that are
being overridden, or remap them in all their local collections.
The second behavior makes most sense in the vast majority of cases.
Note that this was only an issue when directly linking and overriding
objects, not when doing so through collections.
The purpose of `NodeTreeRef` was to speed up various queries on a read-only
`bNodeTree`. Not that we have runtime data in nodes and sockets, we can also
store the result of some queries there. This has some benefits:
* No need for a read-only separate node tree data structure which increased
complexity.
* Makes it easier to reuse cached queries in more parts of Blender that can
benefit from it.
A downside is that we loose some type safety that we got by having different
types for input and output sockets, as well as internal and non-internal links.
This patch also refactors `DerivedNodeTree` so that it does not use
`NodeTreeRef` anymore, but uses `bNodeTree` directly instead.
To provide a convenient API (that is also close to what `NodeTreeRef` has), a
new approach is implemented: `bNodeTree`, `bNode`, `bNodeSocket` and `bNodeLink`
now have C++ methods declared in `DNA_node_types.h` which are implemented in
`BKE_node_runtime.hh`. To make this work, `makesdna` now skips c++ sections when
parsing dna header files.
No user visible changes are expected.
Differential Revision: https://developer.blender.org/D15491
This checks for the availability of `gl_BaseInstanceARB` or equivalent.
Disabling for any workaround that disables shader_image_load_store_support
as a preventive measure.
The case when the query uv is almost on an edge but outside of any
triangle was handled before. Now the case where the query uv is
almost on an edge but inside more than one triangle is handled as well.
I want to add support for PBR materials extension to OBJ, but the way
current I/O code syntax handling was done made it quite cumbersome
to extend the number of MTL textures/parameters.
Simplify all that by removing FormatHandler template on "syntax"
that gets routed through keyword enums, and instead just have
simple `write_obj_*` and `write_mtl_*` functions.
Simplify MTLMaterial to not contain a map of textures (that is always
fully filled with all possible textures), instead now there's
a simple array. Rename `tex_map_XX` to `MTLTexMap`.
All this does not affect behavior or performance, but it does result
in 170 fewer lines of code, and saves a couple kilobytes of executable
size.
While missing the break before a default that only breaks isn't
an error, it means adding new cases needs to remember to add the
break for an existing case, changing the default case will also
result in an unintended fall-through.
Also avoid `default:;` and add an explicit break.
When 'm_render_target' was NULL, backbuffer_res would be used without
being assigned. While it seems likely this code-path is rarely used
(if at all), resolve the logical error.
Introduced in [0], checking the logic here, there seems to be no reason
a press event should ever run release logic, relocate break statement.
In practice this was unlikely to cause problems as peeking into press
events would need to fail, peeking into release would need to succeed.
Even so, better avoid accidental fall through in switch statements.
[0]: 6f158f834d
This patch is a response to T92588 and is implemented
as a Function/Shader node.
This node has support for Float, Vector and Color data types.
For Vector it supports uniform and non-uniform mixing.
For Color it now has the option to remove factor clamping.
It replaces the Mix RGB for Shader and Geometry node trees.
As discussed in T96219, this patch converts existing nodes
in .blend files. The old node is still available in the
Python API but hidden from the menus.
Reviewed By: HooglyBoogly, JacquesLucke, simonthommes, brecht
Maniphest Tasks: T92588
Differential Revision: https://developer.blender.org/D13749
When creating a curves data-block, one is expected to set the new
position values. We can slightly improve performance by avoiding
doing that redundantly.
Similar to cccc6d6905.
The "write_only" (i.e. no reading) API function expects the caller to
set values for all new attribute elements, so using calloc or setting
the default value first is redundant. In theory this can improve
performance by avoiding an extra pass over the array. I observed a
6% improvement in a basic test with the mesh to points node:
from 47.9ms to 45ms on average.
See 25237d2625 for more info.
Similar to cccc6d6905.
In all these cases, it was clear that the layer values were set right
after the layer was created anyway. So there's no point in using
calloc or setting the values to zero first.
See 25237d2625 for more info.
If a "rest_position" attribute already existed, potentiall with another
type, the next name "rest_position.001" would be used, which might
even conflict with a name on another domain. Use the C++ attribute
API instead, which has more standard/predictable behavior.
This allows the render engine to expect non-overlapping resources in the
generated create info.
Textures are indexed from 0 and up.
Nodetree ubo is bound to slot 0.
Uniform attributes ubo is bound to slot 1.
When allocating new `CustomData` layers, often we do redundant
initialization of arrays. For example, it's common that values are
allocated, set to their default value, and then set to some other
value. This is wasteful, and it negates the benefits of optimizations
to the allocator like D15082. There are two reasons for this. The
first is array-of-structs storage that makes it annoying to initialize
values manually, and the second is confusing options in the Custom Data
API. This patch addresses the latter.
The `CustomData` "alloc type" options are rearranged. Now, besides
the options that use existing layers, there are two remaining:
* `CD_SET_DEFAULT` sets the default value.
* Usually zeroes, but for colors this is white (how it was before).
* Should be used when you add the layer but don't set all values.
* `CD_CONSTRUCT` refers to the "default construct" C++ term.
* Only necessary or defined for non-trivial types like vertex groups.
* Doesn't do anything for trivial types like `int` or `float3`.
* Should be used every other time, when all values will be set.
The attribute API's `AttributeInit` types are updated as well.
To update code, replace `CD_CALLOC` with `CD_SET_DEFAULT` and
`CD_DEFAULT` with `CD_CONSTRUCT`. This doesn't cause any functional
changes yet. Follow-up commits will change to avoid initializing
new layers where the correctness is clear.
Differential Revision: https://developer.blender.org/D15617
Issue arises when face areas are really large combined with small UV
areas (report has a mesh ~1.5 km), then precission of shorts is
insufficient.
Now use floats instead.
This also removes this negative signed version of the total area ratio
(since with floats it is no longer used).
Thx @brecht for a lot of hand-holding!
NOTE: this is an alternative to D15805 (and quick tests show this does
not introduce the tiny performance hit as D15805 did).
Maniphest Tasks: T93084
Differential Revision: https://developer.blender.org/D15810
Using the same `GeometryComponentFieldContext` for all situations,
even when only one geometry type is supported is misleading, and mixes
too many different abstraction levels into code that could be simpler.
With the attribute API moved out of geometry components recently,
the "component" system is just getting in the way here.
This commit adds specific field contexts for geometry types: meshes,
curves, point clouds, and instances. There are also separate field input
helper classes, to help reduce boilerplate for fields that only support
specific geometry types.
Another benefit of this change is that it separates geometry components
from fields, which makes it easier to see the purpose of the two concepts,
and how they relate.
Because we want to be able to evaluate a field on just `CurvesGeometry`
rather than the full `Curves` data-block, the generic "geometry context"
had to be changed to avoid using `GeometryComponent`, since there is
no corresponding geometry component type. The resulting void pointer
is ugly, but only turns up in three places in practice. When Apple clang
supports `std::variant`, that could be used instead.
Differential Revision: https://developer.blender.org/D15519
Before 8c25889bb6, subsurf face center tags were stored in each
vertex, so they were always copied to duplicate meshes. Now they are
stored in runtime data though, so they need to be copied explicitly.
The function name "reset_on_copy" is a bit awkward here, so the
tags are copied by the caller.
Actually, when you increase the thickness of the stroke in the outline conversion, the shape of the stroke changes and becomes thicker.
This commit includes a new algorithm to correct this problem. A new `Keep Shape` parameter allows you to disable it because, for artist reasons, it may be good to keep the old algorithm and change the shape.
- PALETTE_OT_color_add: crashed without a brush.
- SCREEN_OT_actionzone: crashed without a window.
- PREFERENCES_OT_studiolight_show: exception when opening prefs failed.
These functions used the term "find", which makes it sound like a lookup
callback, when in fact it would add elements to a set for further
processing. So use "collect" instead.
The slide brush requires attachment information on the curves.
Now a warning is shown instead of crashing Blender. The attachment
information can be generated by executing the
`Curves > Snap to Nearest Surface` operator.
EEVEE-Next passes were rendered to the render result, but didn't appear
in the compositor. Reasoning is that when a render engine has the update
render passes callback registered it would not register any default
render passes. This callback is used to update the Render Layer node.
This patch implements the callback for EEVEE-Next with the render passes
that are already available. In the future the callback should be
extended. Note that AO/SHADOW render passes have been disabled for now
as they need to be converted to color buffers.
Instead to use always a value of 1, now the thickness of the stroke perimeter can be set.
This thickness is added to the original perimeter, so using a big number can increase the global thickness of the stroke.
These functions that retrieve strings from assets return stringrefs.
Storing them as std::strings is unnecessary and relies on binding to
the const references.
If these layers didn't exist on the original mesh, they would be created
from scratch and transferred anyway. That is inefficient because all the
work is pointless, and because creating these layers could slow down
subsequent sculpt operations.
It's possible for misbehaving scripts written before 3.3 to reach
this state and crash Blender. With this change, the error is reduced
to a Python exception.
Differential Revision: https://developer.blender.org/D15724
If reroute node lies in side the frame node boundaries then set
frame node as the parent of reroute.
Differential Revision: https://developer.blender.org/D15739
If reroute node lies in side the frame node boundaries then set
frame node as the parent of reroute.
Differential Revision: https://developer.blender.org/D15739
Same as other build options, don't make it a hard requirement to have
Wayland libraries installed when it gets enabled by default.
Also fixes wayland-protocols not being found on the buildbot.
This allows individual users or Linux distributions to specify a directory
Cycles will automatically look for the OptiX include folder, to compile kernels
at runtime.
It is still possible to override this with the OPTIX_ROOT_DIR environment
variable at runtime.
Based on patch by Sebastian Parborg.
Ref D15792
This is a more C++ friendly version MEM_calloc_arrayN, like MEM_cnew is for
MEM_callocN. For cases where data structures are still C and Vector or Array
don't work.
OpenVDB crashes when the determinant of the grid transformation is
too small. The solution is too detect when the determinant is too small
and to replace the grid with an empty one. If possible the translation
and rotation of the grid remains unchanged.
Differential Revision: https://developer.blender.org/D15806
Those strings were at least partly disambiguated:
- Area
- Zone
- Measurement
- Ease
- BBone Ease In / Out
- Back
- Camera BG image depth
- GP interpolate sequence
- Edge Crease
- Theme
- Jitter
- Brush
- GPencil
- Lens distorsion compositing node
- Cineon color management
- Black
- Gamma
- White
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15791
The structures in rna_mesh.c all had a UI text which showed up in the
animation editors, except for MeshUVLoop.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15803
Translate:
- new group socket names
- default names Input and Output
- on connecting a link from another node
- new geometry nodes input and output socket names
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15763
The info provided by add-ons is very valuable to users, yet it wasn’t translatable yet.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15747
Weight and Vertex paint don't change coordinates and thus don't need
crazyspace data, which allows using coordinates from normal evaluated
meshes.
Since painting uses original topology, the deform only mesh is used,
but if the fully evaluated mesh has the same topology, it is preferred.
This is useful because not only Geometry Nodes, but even simple weight
computation modifiers are excluded from the deform only mesh evaluation.
Differential Revision: https://developer.blender.org/D15501
This new option converts the stroke to outline perimeter as soon as is drawn.
If no alternative material is set, the actual material is used.
The algorithm is similar to the new operator in D15664
Reviewed By: pepeland
Differential Revision: https://developer.blender.org/D15738
Previously the base virtual array implementation optimized for
common cases where data is stored as spans or single values.
However, that didn't make sense when there are already
sub-classes that handle those cases specifically. Instead,
implement the faster materialize methods for each class.
Now, if the base class is reached, it means no optimizations
for avoiding virtual function call overhead are used.
Differential Revision: https://developer.blender.org/D15549
When the curve type attribute doesn't exist, there is no reason to
create an array for it only to fill the default value, which will add
overhead to subsequent "add" operations. I added a "get_if_single"
method to virtual array to simplify this check. Also use the existing
functions for filling curve types.
Differential Revision: https://developer.blender.org/D15560
Our convention is to use `INC_*` for include directories,
this caused `make check_cmake` to incorrectly fail as it expected
these files to be include directories.
Since [0] notifiers were cleared and left in the queue, while harmless
it meant the call to remove the notifier from the set was redundant.
Now set aside a category to tag notifiers as having been cleared and
skip them entirely.
[0]: 0aaff9a07d
Regression in recent fix for T66088 [0]. caused by much older problem
introduced with [1] & [2].
Unlike other platforms, as of [1] GHOST/Win32 was keeping track of the
pressed modifier keys.
Since GHOST/Win32 cleared the modifier state on window activation [2]
and only changes to modifier state would generate key events, activating
the window and releasing the modifier would not send the release event.
Resolve this by removing the stored modifier state from GHOST/Win32,
always passing modifier press/release events through to Blender
(matching other GHOST back-ends).
Instead, use key-repeat detection to prevent repeated modifier keys
from being generated - an alternate solution to T26446.
[0]: 8bc76bf4b9
[1]: d6b43fed31
[2]: 6b987910e4
With rBe6a557952ead, concerns were reported about missing updates when
the view is moved other than through the Edge Pan system.
Although the transform operator blocks navigation in general, it is
good to avoid these cases.
The view offset, calculated by the Edge Pan system, only affects the
position of the nodes, but forget to update:
- snapping data
- final value of transform
- values used for custom drawing
Therefore, to avoid having to update a lot of scattered data, the
`transformViewUpdate` utility has been implemented to recalculate input
values when the view changes.
This utility does more than is necessary to fix the bug, but with that,
it can work in any situation.
The view offset, calculated by the Edge Pan system, only affects the
position of the nodes, but forget to update:
- snapping data
- final value of transform
- values used for custom drawing
Therefore, to avoid having to update a lot of scattered data, the
`transformViewUpdate` utility has been implemented to recalculate input
values when the view changes.
This utility does more than is necessary to fix the bug, but with that,
it can work in any situation.
The function does modify the object since it changes the name of a layer
it owns. Ideally this wouldn't be possible, but raw pointers don't have
ownership semantics so this is a common problem with CustomData.
The calculation was revised to address two issues:
* Discontinuities occurring when detail was a non-integer greater than 2.
* Levels of detail in the interval [0,1) repeating the levels of detail in
the interval [1,2).
This fixes Cycles, Eevee and geometry nodes.
Differential Revision: https://developer.blender.org/D15785
The blendfile_liblink and blendfile_io python tests in debug fired an
assert that WMWinMan object was in Main database, but not in the ID
name map. This was caused by wm_window_match_do going into case 3
there: the new WM list is completely empty, the old list is not empty,
and it was directly using the old/current list (via
wm_window_match_keep_current_wm function), without actually
registering/validating the objects in it through the name map.
Reviewed By: Bastien Montagne
Differential Revision: https://developer.blender.org/D15787
The blendfile_liblink and blendfile_io python tests in debug fired an
assert that WMWinMan object was in Main database, but not in the ID
name map. This was caused by wm_window_match_do going into case 3
there: the new WM list is completely empty, the old list is not empty,
and it was directly using the old/current list (via
wm_window_match_keep_current_wm function), without actually
registering/validating the objects in it through the name map.
Reviewed By: Bastien Montagne
Differential Revision: https://developer.blender.org/D15787
While converting types from callbacks isn't a bug, it's unlikely
we ever want to do this on purpose and can hide mistakes such as
silently converting floating point values to ints as happened
with Sequencer.frame_start.
Those collections were so far mainly just tagged as fake user (even
though a few places in code already incremented usercount on them).
Since we now clear the fakeuser flag when linking/appending data, ensure
that these collections are preserved by making these usages regular ID
refcounting ones.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D15783
Commit is not working as expected in some cases, as revealed by
liboverride testcase entering infinite loop.
Code needs some more thinking.
This reverts commit ee7bd79b54.
Usually, when overriding collections, the linked reference ones are
removed from the ViewLayer, and the overrides replace them.
This change to `layer_collection_sync` code makes it so that in case
there is a free viewlayer hierarchy matching the linked collection, it
gets re-used for the override one, instead of re-creating everything
from scratch.
To achieve this, resync process is split into two steps, first regular
collections are processed, then the override ones. This should ensure
an override does not steal the layers of its reference if the later is
still instantiated in the view layer.
Since rBb100bdca25b1 the parent inverse was always reset in
ED_object_parent (also for just changing the parent type).
This does make sense (since there is no point keeping it when e.g
changing from "Bone" to "Object" or "Vertex" to "Object", for this to
really make sense it would have to be properly recalculated anyways
which does not happen afaict).
The reported issue was that setting the prop to the same value as it was
before (e.g. from "Object" to "Object") would still reset the parent
inverse which was really unexpected since from a user standpoint,
nothing has changed here.
So in case the value does not really change, we now just early out and
skip `ED_object_parent`.
Maniphest Tasks: T100599
Differential Revision: https://developer.blender.org/D15771
Return faces instead of face indices from bmesh_linked_uv_islands
since BMesh indices aren't reliable when geometry is added/removed,
where the faces will still be valid.
Added [0] which notes in most cases results are the same but in some
cases the result seems better. While true at the time of writing since
then mat3_to_quat has been improved and used for nearly all matrix
to quaternion conversion.
0: 876cfc837e
Making the callers responsible for this isn't practical as matrices are
often passed indirectly to a functions such as mat3_to_axis_angle,
BKE_object_mat3_to_rot & BKE_pchan_mat3_to_rot.
Or the matrix is combined from other matrices which could be negative.
Given quaternions calculated from negative matrices are completely
invalid and checking only needs to negate matrices with a negative
determinant, move the check into mat3_to_quat and related functions.
Add mat3_normalized_to_quat_fast for cases no error checking on the
input matrix is needed such as blending rotations.
With C++ we should transition towards namespaces to avoid naming
collisions. Having the namespace in place is the first step for that
transition.
Plus, the `typedef` isn't necessary for struct/class/enum definitions
in C++, so avoid the verbosity it adds.
Inconsistencies in update/tagging code between different code doing the
same 'Clear. liboverride operation lead to crashes in some cases.
Unify deg tagging and WM notifiers accross the three editor-level
codepaths performing the common Make/Reset/Clear operations.
Preserve if possible the active object accross Clear operation.
Several cleanup/rename/re-arangement of code to make it more consistent.
Fix typo in blender_release.cmake, and ensure that "make release" still works
when ocloc is not available. While a fatal error is useful for debugging, the
current convention is to disable features, especially in cases like this where
there is no simple way to make the feature work.
Differential Revision: https://developer.blender.org/D15774
Mistake in own rBc76d7f7bde35.
Happened when no image was set in the Image Editor already (which is now
checked for).
Maniphest Tasks: T100590
Differential Revision: https://developer.blender.org/D15761
Use a more direct method of checking if a matrix is negative instead of
using cross & dot product.
Also replace some determinant_m3() < 0 checks with is_negative_m3.
The result of mat3_normalized_to_quat isn't valid for negative matrices.
Isolate the fix to the Matrix.to_quaternion() instead of changing
mat3_normalized_to_quat to prevent unintended side effects elsewhere.
Caused by 2480b55f21 using the undo step indices instead of the
indices of vertices in the mesh, causing the hide values to be swapped
around randomly in the mesh.
The number of attribute domains isn't an attribute domain, so storing
ATTR_DOMAIN_NUM in a variable with an eAttrDomain type isn't correct.
In the cases it was used, the value wouldn't be accessed anyway.
PLATFORM_BUNDLED_LIBRARIES gathers shared libraries that will be installed
to the lib/ folder. The Blender executable gets a relative rpath pointing to
this folder as part of the install step.
The build rpath is different and uses absolute paths, so that it works for
executables like tests that are in different locations, and to support the
case where the build and install folders are different.
The system is already used for the OpenMP library on macOS. But on Linux it
will only kick in once we start using shared libraries for dependencies.
This also removes Mesa libraries from the old location, as these would cause
Blender to start with software OpenGL.
Ref T99618
Invalidate depsgraph.object_instances when freed, this resolves a crash
when accessing the object instances after iteration has finished.
Unlike most other collections, object_instances is only valid while the
iterator is in-memory.
The Python/RNA API needs to inline int/string collection lookups so the
Python instance can be created before the iterator ends.
Reviewed By: mont29, sergey
Ref D15755
This is done by checking the number of bitplanes from the image buffer.
We assume that for float buffer to use the same bitplanes as it was a
byte buffer.
Then, the data of the image buffer is packed at the start of the `rect` or
`float_rect` before upload.
**Statistics - einar.v004.blend **
Note that not all grayscale textures have been stored as BW images so the
amount of memory that can be reduced would be more.
Without patch
```
104 Textures - 3294.99 MB (3294.47 MB over 32x32), 37 RTs - 192.52 MB.
Avg. tex dimension: 2201.88x1253.51 (2283.53x2202.13 over 32x32)
464 Buffers - 25.01 MB total 1.24 MB IBs 23.50 MB VBs.
3512.52 MB - Grand total GPU buffer + texture load
```
Patch applied
```
104 Textures - 2917.66 MB (2917.14 MB over 32x32), 39 RTs - 215.45 MB.
Avg. tex dimension: 2221.38x1252.75 (2323.28x2253.47 over 32x32)
467 Buffers - 25.01 MB total 1.24 MB IBs 23.51 MB VBs.
3158.13 MB - Grand total GPU buffer + texture load.
```
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D15484
Since {rB2542fda14d85}, `r_node` is an unused parameter.
Changed `load_texture_image` to reflect that.
Differential Revision: https://developer.blender.org/D15759
Main motivation is from T54314 where there was no way to read from a
Viewer image datablock after setting another viewer node active.
Part of the problem was addressed in rB16d329da284c (where handlers for
the compositing background job were added so that you can act after the
compositor has run), however there was still the remaining issue that
setting another viewer node active would not properly tag the node
NODE_DO_OUTPUT. This forced users into a complicated workaround (using
switch nodes feeding into a single viewer node).
Now handle NODE_DO_OUTPUT properly in RNA, too, and do proper updates so
that behavior from RNA matches that of the Node Editor when setting a
viewer node active.
ref T54314.
Reviewed By: JacquesLucke
Maniphest Tasks: T54314
Differential Revision: https://developer.blender.org/D15203
When changing the frame_number of a grease pencil frame, the grease
pencil object is not updated correctly. The frame stays where it
previously was.
The fix adds a `property_update` callback to the `frame_number` RNA
property.
Maniphest Tasks: T99524
Reviewed By: antoniov
Differential Revision: https://developer.blender.org/D15394
This makes workspaces more translatable:
- New Workspace menu
- header
- preset menus
- preset entries
- workspace names upon factory file template load
- new workspace name upon workspace addition
To properly translate those names, an extraction function for
workspace names from app templates was added as well.
(Do not do anything when loading a user-saved file!)
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15727
This was the case when the "Show in Editmode" option was used and a
vertexgroup affected the areas.
Probably an oversight in {rBdeaff945d0b9}?, seems like deforming
modifiers always need to call `BKE_mesh_wrapper_ensure_mdata` in
`deformVertsEM` when a vertex group is used.
Maniphest Tasks: T100578
Differential Revision: https://developer.blender.org/D15756
Since {rBb0cb0a785475}, changing the active texture in the Node Editor
would also change the current image in the Image Editor.
While this was an overall improvement, this was not desired when the
image currently looked at was a `Render Result` or a `Viewer Node`
(artists usually want to keep focus on these).
With this patch, syncing the active texture change from the Node Editor
to the Image Editor will now only happen if the Image Editor's current
image is not a Render Result or a Viewer Node.
NOTE: Syncing the active paint slot to the Image Editor still happens
(even if the Image Editor's current image is not a Render Result or a
Viewer Node), behavior was not changed since this is a much more
explicit action while texture painting and probably desired in that
case.
Maniphest Tasks: T99493
Differential Revision: https://developer.blender.org/D15749
The realtime compositor sometimes produces fuzzy results when the
interpolation is set to bilinear. This was due to the domain realization
shader, which incorrectly sampled the input image.
This patch fixes such fuzziness by introducing a 0.5 offset to evaluate
the sampler at the center of pixels. Additionally, it makes sure the
centring offset is an integer offset by taking its floor, retaining the
previous 0.5 offset even with the difference in size is odd.
Add missing labels, and also add tooltips.
Unfortunately there is no way currently to extract two messages from a
single 'function' call, so unless those type of macros become very
widely used, would keep it as manual tagging.
Also disambiguate `case` in text context, pretty sure English is one of
the very rare languages to use this word for character case too.
- Keying (keyframe insertion)
- Roughness (particle children)
- New image, collection, text (in menus)
- Parents (particles)
- Wrap (text)
- Light (add menu)
- Empty (volume add menu)
- Empty (empty add menu)
- Cycles (f-curve modifier)
- Drag (workspace tool type)
- Power (light intensity)
- Power (math nodes)
This last change also moves all math operations in nodes to the
ID_nodetree context. It's needed only for some operations, but we
can't be more granular here.
Also...
- Fix context extraction for interpolation mode headers in F-Curves
and GPencil interpolation operator
- Enable new translation: "Slot %d" in image editor
- Fix an English message in the node editor:
"Replace the input image's alpha channels by..." -> channel
Ref. T43295
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15694
`UI_context_active_but_prop_get_templateID` became much more widely used
with recent rBfec254364884, which revealed that it did not do any check
on actual type of data it accesses, resulting easily in undefined
behavior.
Now also check the callback function pointer, this should be safe
enough.
Patch by @Severin (Julian Eisel), many thanks!
There was a memory leak in the GPU code generator for the compositor
output. It was just due to a missing free in the GPU code generator
destructor, so this patch makes sure it is freed.
This fixes a compilation error in eevee_light_culling_debug shader.
Some compilers complained when accessing the same data twice. Unclear
why. We should investigate that this change doesn't harm the performance
of the shader.
Although the light is a local variable it might clutter available
registers. If so it will harm developers during debugging.
Due to a copy-paste error there was an out of bound read. Some drivers
didn't complain about it, others did. This patch fixes the compilation
error by accessing the array within bounds.
Imeplemented **ViewLayer.aovs.remove** by Adding a new rna function to call the internal **BKE_view_layer_remove_aov**, removed assert from **BKE_view_layer_remove_aov**.
Reviewed By: jbakker
Maniphest Tasks: T99259
Differential Revision: https://developer.blender.org/D15341
Restore old hitbox for connecting links to sockets.
Commit rBd9d97db018d2 improved the node socket snapping when nodes
are close together by decreasing the tolerance around the cursor when
checking for nodes in front, that might occlude the socket.
In doing so it also reduced the hitbox of the node socket itself that
extended outside of the node.
This commit restores the old node socket hitbox while keeping the
improved behavior when nodes are close together with the following
changes:
1) When looking for the socket under the cursor, iterate through the
nodes front to back, which prioritizes node sockets in the foreground.
2) Instead of checking for another node underneath the cursor it checks
if the socket is actually occluded by another node.
The way the occlusion test for sockets is tweaked you can now connect to
sockets that are only partially occluded, which is a bit more forgiving
than previously.
Reviewed By: Hans Goudey
Differential Revision: http://developer.blender.org/D15731
Restore old hitbox for connecting links to sockets.
Commit rBd9d97db018d2 improved the node socket snapping when nodes
are close together by decreasing the tolerance around the cursor when
checking for nodes in front, that might occlude the socket.
In doing so it also reduced the hitbox of the node socket itself that
extended outside of the node.
This commit restores the old node socket hitbox while keeping the
improved behavior when nodes are close together with the following
changes:
1) When looking for the socket under the cursor, iterate through the
nodes front to back, which prioritizes node sockets in the foreground.
2) Instead of checking for another node underneath the cursor it checks
if the socket is actually occluded by another node.
The way the occlusion test for sockets is tweaked you can now connect to
sockets that are only partially occluded, which is a bit more forgiving
than previously.
Reviewed By: Hans Goudey
Differential Revision: http://developer.blender.org/D15731
Fix possibility of getting invalid fixed-pitch advance size.
See D15735 for more details.
Differential Revision: https://developer.blender.org/D15735
Own Code.
When displaying the Hierarchies view of the Library Overrides display
mode in a specific Heist production file, Blender would become
unresponsive for about 30 seconds and every redraw in the Outliner would
lag noticably. Issue is that the sum of hierarchy elements is multiple
thousands, and that really brings the Outliner to its knees. I've looked
into some improvents and committed a few minor ones already, but it
seems it's really the big sum of elements causing the issue. There
doesn't appear to be a single bottle-neck.
To work around this, "lazy build" children, so that children of
collapsed elements are not actually created. This brings the tree
building down to some tens of miliseconds, and redrawing becomes
rather lag-free again, even with big parts of the tree un-collapsed.
Problem: Searching still needs to build the entire tree, so it's
essentially unusable right now. Should we disallow searching
altogether?
Makes the lazy-building (where children are only built when the parent
isn't collapsed) more generic, so more display modes can use it. So far
this was hardcoded for the "Data API" display mode.
This will be used to work around a big performance issue with the
Library Overrides Hierachies view in a complex production file, see
following commit.
When displaying the Hierarchies view of the Library Overrides display
mode in a specific Heist production file, Blender would become
unresponsive for about 30 seconds and every redraw in the Outliner would
lag noticably. Issue is that the sum of hierarchy elements is multiple
thousands, and that really brings the Outliner to its knees. I've looked
into some improvents and committed a few minor ones already, but it
seems it's really the big sum of elements causing the issue. There
doesn't appear to be a single bottle-neck.
To work around this, "lazy build" children, so that children of
collapsed elements are not actually created. This brings the tree
building down to some tens of miliseconds, and redrawing becomes
rather lag-free again, even with big parts of the tree un-collapsed.
Problem: Searching still needs to build the entire tree, so it's
essentially unusable right now. Should we disallow searching
altogether?
Makes the lazy-building (where children are only built when the parent
isn't collapsed) more generic, so more display modes can use it. So far
this was hardcoded for the "Data API" display mode.
This will be used to work around a big performance issue with the
Library Overrides Hierachies view in a complex production file, see
following commit.
This container is type safe and contains a few nice optimizations,
although they shouldn't make a big difference here in practice. The
hashing now uses our default hashing method which reduces code
complexity and seems to perform slightly better in my tests.
For a Heist shot with a highly complex library overrides hierarchy in
the Outliner this reduces the tree building time from around 25 to 23.6
seconds here. However the main design change for performance is yet to
come, all this is just general code refactoring (which at least
shouldn't make performance worse).
Based on the paper "Practical Hash-based Owen Scrambling" by Brent Burley,
2020, Journal of Computer Graphics Techniques.
It is distinct from the existing Sobol sampler in two important ways:
* It is Owen scrambled, which gives it a much better convergence rate in many
situations.
* It uses padding for higher dimensions, rather than using higher Sobol
dimensions directly. In practice this is advantagous because high-dimensional
Sobol sequences have holes in their sampling patterns that don't resolve
until an unreasonable number of samples are taken. (See Burley's paper for
details.)
The pattern reduces noise in some benchmark scenes, however it is also slower,
particularly on the CPU. So for now Progressive Multi-Jittered sampling remains
the default.
Differential Revision: https://developer.blender.org/D15679
As mentioned in T89399, "the source of this bug is that cursor wrap
moves the cursor, but when it later checks the mouse position it hasn't
yet been updated, so it re-wraps".
As far as I could see, this happens for two reasons:
1. During the first warp, there are already other mousemove events in the queue with an outdated position.
2. Sometimes Windows occasionally and inexplicably ignores `SetCursorPos()` or `SendInput()` events. (See [1])
The solution consists in checking if the cursor is inside the bounds right after wrapping.
If it's not inside, it indicates that the wrapping either didn't work or the event is out of date.
In these cases do not change the "accum" values.
1. f317d619cc/src/video/windows/SDL_windowsmouse.c (L255))
Maniphest Tasks: T89399
Differential Revision: https://developer.blender.org/D15707
The realtime compositor crashes when some nodes are unlinked.
This happens for GPU material nodes if it was compiled into its own
shader operation. Since it is unlinked, the shader operation will have
no inputs, a case that the current code didn't consider.
This patch fixes this by skipping code generation for inputs if no
inputs exist for the shader operation.
- Use upper-case for defines.
- Use u-prefix for unsigned types.
- Use snake case for struct members.
- Use const struct for unicode_blocks & arguments.
- Use doxy style comments for struct members.
- Add doxy sections for recently added code.
- Correct code-comments (outdated references).
- Remove 'e' prefix from struct UnicodeBlock/FaceDetails
(normally used for enums).
Use `inline constexpr` instead of `static constexpr` to prevent these
variables from being duplicated in each translation unit that includes
the BLI_any.hh header.
Differential Revision: https://developer.blender.org/D15698
Change `cd_loop_uv_offset` from signed to unsigned, forcing
a crash if passed invalid input.
Differential Revision: https://developer.blender.org/D15722
This function never succeeded as an off by one error checking the last
character always indexed the null byte.
The 'for' loop was broken as of [0] since the unsigned number could wrap
around with some RNA paths causing out of bounds memory access.
This is an example where tests would have caught the problem early on,
RNA path tests are planned as part of D15558.
[0]: 11b4d0a3c3
Gamma correction for glyph coverage values.
See D13376 for details and examples.
Differential Revision: https://developer.blender.org/D13376
Reviewed by Julian Eisel
- Turn storage into an object with "automatic" memory management (RAII)
so freeing is implicit and reliable.
- Turn functions into member functions, to have the data and its
functions close together with controlled access that increases
encapsulation and hiding implementation details.
- Use references to indicate null is not an expected value.
- Related minor cleanup (comments, use const etc.)
Couldn't spot any changes in performance.
This way you can benchmark the tree rebuilding by simply commenting out
a single line. Not that it was difficult before, but this makes it as
easy as it gets, with basically no knowledge of existing benchmarking
tools required.
Simplifies code quite a bit, since this was doing the typical work of
such a container. I may remove this vector entirely as I'm working on
performance fixes, not sure, but simplifying this helps reason about the
design.
Couldn't spot performance differences in some benchmarks, and I wouldn't
expect any. Maybe some minor onces thanks to the small buffer
optimization of `blender::Vector`.
- Use C++ nullptr instead of C's NULL (clang-tidy warns otherwise)
- Use early exit/continue to avoid indentation (helps readability
because visual scope of no-op branches is minimized).
- Use const for local variables, to separate them clearly from the
mutable ones.
- Avoid struct typedef, this is not needed in C++
This gave a 1.1x speedup, however also leads to very long compile times
that make it seems like Blender has stopped working.
This can be brought back in the future behind an option that users can
explicitly enabled.
Fix T100102
Ref D14923, D14763, T92212
We only need to 'manually' remap RNA ID pointer property to the newly
created override if the owner itself was not already a local override.
Also some more minor tweaks to notifiers sent when creating the
override.
This patch implements the bilateral blur node for the realtime compositor.
Differential Revision: https://developer.blender.org/D15674
Reviewed By: Clement Foucault
This patch implements the despeckle node for the realtime compositor.
Differential Revision: https://developer.blender.org/D15673
Reviewed By: Clement Foucault
This operator converts any stroke of gpencil with a center line into a stroke with the perimeter.
It's possible to assign the active material, keep current or create a new material for all perimeters.
The conversion is only done for strokes with a material using `Stroke`. Only `Fill` strokes are not converted.
Known issues: As the perimter has not boolean implementation, some perimeters can be overlaped. This could be solved in the future when a new 2D boolean library will be developed.
Reviewed By: mendio, pepeland, frogstomp
Differential Revision: https://developer.blender.org/D15664
Assigning to RNA ID pointer properties will not _always_ trigger a
rebuild of the outliner tree, so try to enforce this when actually
creating overrides.
This introduces a new `UI_MT_button_context_menu` class which is
registered at startup. Addons can append/prepend draw functions to this
class, in order to add their custom context menu entries.
The new class replaces the old `WM_MT_button_context` class, thus
requiring a small change in addons using this feature. This is done
because addons were previously required to register the class
themselves, which caused addons to override each other's context menu
entries.
Now the class registration is handled by Blender, and addons need only
append their draw functions. The new class name ensures that addons
using the old method don't override menu entries made using the new
class.
Menu entries added with the legacy `WM_MT_button_context` class are
still drawn for backwards compatibility, but this class must not be used
going forward, as any addon using it still runs the risk of having its
menu entries overridden, and support for the legacy class is subject to
removal in a future version.
Reviewed By: campbellbarton
Maniphest Tasks: T100423
Differential Revision: https://developer.blender.org/D15702
Case where object was directly linked and not owned by a linked
collection was not properly handled, added some level of support for it
now.
Note that the behavior may not always be ideal in cases where the linked
object would be linked in many different local collecitons, hard to get
best solution always from this Editor given limited hierarchy data
available here.
This patch implements the directional blur node for the realtime compositor.
Differential Revision: https://developer.blender.org/D15672
Reviewed By: Clement Foucault
This patch implements the filter node for the realtime compositor.
Differential Revision: https://developer.blender.org/D15661
Reviewed By: Clement Foucault
This patch implements the bokeh image node for the realtime compositor.
Differential Revision: https://developer.blender.org/D15660
Reviewed By: Clement Foucault
Use a GSet to check for duplicate notifiers, for certain Python scripts
checking for duplicate notifiers added considerable overhead.
This is an alternative to D15129 with fewer chances to existing logic.
The offending line was attempting to artificially add width to the
length of the string in order to "avoid ellipsing text that nearly
fits". The line doesn't actually appear to do anything beneficial, and
it causes the nasty text bug.
Old:
{F13029695}
New:
{F13327308}
Reviewed By: campbellbarton
Ref D15585
Instead of using macros like GLIBC we can use the CMake build
systems internal functions to check if some header or functions are
present on the running system's libc.
Add ./build_files/cmake/have_features.cmake to add checks for
platform features which can be used to set defines for source
files that require them.
Reviewed By: campbellbarton
Ref D15696
Since VBO stands for vertex buffer object it should always be uppercase.
"Vertex" in "vertex buffer object" should only be capitalized at the
beginning of a sentence.
Comments there weren't really helpful, took me a while to get what they
try to say. This attempts to add a better explanation. Also add an
assert for a previous, implicit (but commented) assumption, and some
minor cleanups.
Was always creating a copy of `SpaceOutliner`, even though it's only
needed for one conditional branch. This is a shallow copy, so shouldn't
be that expensive, still trivial to avoid.
Metaball, curve, text, and surface objects use the geometry component
system to add evaluated mesh object instances to the dependency graph
"for render engine" iterator. Therefore it is unnecessary to process
those object types in these loops-- it would either be redundant work
or a no-op.
With the ultimate goal of simplifying drawing and evaluation,
this patch makes the following changes and removes code:
- Use `Mesh` instead of `DispList` for evaluated basis metaballs.
- Remove all `DispList` drawing code, which is now unused.
- Simplify code that converts evaluated metaballs to meshes.
- Store the evaluated mesh in the evaluated geometry set.
This has the following indirect benefits:
- Evaluated meshes from metaball objects can be used in geometry nodes.
- Renderers can ignore evaluated metaball objects completely
- Cycles rendering no longer has to convert to mesh from `DispList`.
- We get closer to removing `DispList` completely.
- Optimizations to mesh rendering will also apply to metaball objects.
The vertex normals on the evaluated mesh are technically invalid;
the regular calculation wouldn't reproduce them. Metaball objects
don't support modifiers though, so it shouldn't be a problem.
Eventually we can support per-vertex custom normals (T93551).
Differential Revision: https://developer.blender.org/D14593
This is old code to keep track of an active search element, so you could
step through the search results. This isn't used anymore, and not needed
since searching now filters the tree to only show matches. If we ever
wanted to have support for stepping through elements again, that should be
done via the active element instead.
handle_subversion_warning() was reporting with RPT_ERROR type, replaced
with RPT_WARNING.
RPT_ERROR would stop python scripts opening files written by newer
Blender binary with bpy.ops.wm.open_mainfile(), preventing further code
from running. This does not seem right since Blender itself still loads
the files.
Ran into this checking T100446 in 2.93.
Differential Revision: https://developer.blender.org/D15712
Pressing escape when rendering a viewport animation would
access the freed even and crash (with ASAN enabled).
Always check the context's window before the event as this is a signal
a file was loaded or the window was closed (and it's events freed).
Use an off-screen buffer for the screen-shot operator.
Reading from the front-buffer immediately after calling swap-buffers
failed for GHOST/Wayland in some cases.
While EGL can request to preserve the front-buffer while drawing,
this isn't always supported. So workaround the problem by avoiding
use of the front-buffer entirely.
These macros don't compile in C++ because of taking an address of a
temporary and use of designated initializers. Besides that, using
functions can improve debugging and type safety.
Differentil Revision: https://developer.blender.org/D15693
Implementation of the FreeType 2 cache subsystem, which limits the
number of concurrently-opened FT_Face and FT_Size objects, as well as
caching information like character maps to speed up glyph id lookups.
This time with the option of opening FontBLFs that are not cached.
See D15686 for more details.
Differential Revision: https://developer.blender.org/D15686
Reviewed by Brecht Van Lommel
Commit rBc0845abd897f to 3.4 (master) uses font's filepath without
checking if it exists, therefore crashing on embedded fonts since
they do not have a filepath (loaded from memory).
See D15703 for more details
Differential Revision: https://developer.blender.org/D15703
Reviewed by Brecht Van Lommel
Loopback ID pointers should be ignored here as well, otherwise they are
very efficient at preventing proper detection of 'leaf' override IDs in
a hierarchy.
Adds a pie menu to the File Browser for convenient switching between vertical list, horizontal list and thumbnail view.
Uses the same shortcut as other View pie menus (`ACCENT_GRAVE`).
{F12811673}
Reviewed By: #user_interface, pablovazquez, Severin
Differential Revision: https://developer.blender.org/D13874
* Flip the logic to first detect if we are dealing with an unmodified mesh
in editmode. And then if not, detect if we need a mapping or not.
* runtime.is_original is only valid for the bmesh wrapper. Rename it to clarify
that and only check it when the mesh is a bmesh wrapper.
* Remove MR_EXTRACT_MAPPED and instead check only for the existence of the
origindex arrays. Previously it would sometimes access those arrays without
MR_EXTRACT_MAPPED set, which according to a comment means they are invalid.
Differential Revision: https://developer.blender.org/D15676
A few libraries were updated and a few added.
There are a few depedencies to intel oneAPI which I did not include, since we
refer already to Intel oneAPI already.
This fixes missing selection updates in UV editor, both with GPU subdivision
and with the Modified Edges display option for modifiers in general.
It also fixes the UV editor incorrectly showing the cage mesh with deformed
coordinates. These are not yet supported by the UV selection system.
Changes:
* Always read selection state from the editmesh when building batches. The
flags in the evaluated mesh can be outdated as selection bypasses depsgraph
evaluation for performance, and instead may just clear the batches.
* runtime.is_original is only valid for the bmesh wrapper. The check for
building the UV cage should only use that if the mesh is a bmesh wrapper.
* Don't create cage batches for objects whose mesh is in edit mode, but that
are not themselves in edit mode, there is no need.
Differential Revision: https://developer.blender.org/D15658
This change combines the diffuse/specular light passes into a single texture
array, freeing up an image binding for cryptomatte.
When diffuse/specular light pass and/or requested a
texture array will be allocated. Only when specular light is requested 2 images will always be allocated. This increases the
memory overhead when viewing the specular light renderpass in the viewport. For final rendering it is a common scenario that none
or both are requested.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D15701
Also add new outliner liboverride operators mapping to the manual,
though this is useless currently as this feature is not working in many
part of the UI, including the Outliner contextual menu.
While fixing T100302 (rBd76583cb4a1) I did not realize that the
change in imported vertex order would actually matter. Turns out, it
does for morph targets / mesh shape keys. So redo the fix in a way
that does not change the vertex order. Fixes T100421.
Fix boundary conditions for the Relax UV tool with the Laplacian method.
Add Pinned UV support to Relax UV tool (all modes) and Pinch UV tool.
Differential Revision: https://developer.blender.org/D15669
The original intention from [0] was to force background-mode when built
WITH_HEADLESS or WITH_PYTHON_MODULE, with the else clause setting the
signal handler for Ctrl-C. Since WITH_PYTHON_MODULE now disables all
signal handlers this check no longer makes sense.
[0]: 9d9c05a101
* Fixed crash in debug draw code. Apparently this is
only used by PBVH draw?
* Debug draw code can now be forcibly enabled in release
mode (i.e. RelWithDebugInfo) by uncommenting a commented
out #define.
* Fixed colors in debug draw mode.
* PBVH node boxes in debug mode now flash a different color
when they are updated.
SCULPT_undo_push_begin no longer takes an explicit
name. Instead it takes a wmOperator pointer and uses
op->type->name for the name. This is necassary for
the redo panel to work and should fix the entire class
of bugs related to misspelled undo push names.
Cases where the calling operator is not registered
may use SCULPT_undo_push_begin_ex if desired; it
takes a name string as before.
This new implementation does all downsampling in a single compute shader
dispatch, removing a lot of complexity from the previous recursive
downsampling.
This is heavilly inspired by the Single-Pass-Downsampler from GPUOpen:
https://github.com/GPUOpen-Effects/FidelityFX-SPD
However I do not implement all the optimization bits as they require
vulkan (GL_KHR_shader_subgroup) and is not as versatile (it is only
for HiZ).
Timers inside renderdoc report ~0.4ms of saving on a 2048*1024 render for
the whole downsampling. Note that the previous implementation only
processed 6 mips where the new one processes 8 mips.
```
EEVEE ~1.0ms
EEVEE-Next ~0.6ms
```
Padding has been bumped to be of 128px for processing 8 mips.
A new debug option has been added (debug value 2) to validate the HiZ.
With this patch true headless OpenGL rendering is now possible on Linux.
It changes the logic of the WITH_HEADLESS build flag.
The headless backend is now always available with regular builds and
Blender will try to fall back to it if it fails to initialize other
backends while in background mode.
The headless backend only works on Linux as EGL is not used on Mac or Windows.
libepoxy does support windows and mac, so this can perhaps be remedied in the future.
Reviewed By: Brecht, Jeroen, Campbell
Differential Revision: http://developer.blender.org/D15555
This cleans up the OpenGL build flags and linking.
It additionally also removes some dead code.
One of these dead code paths is WITH_X11_ALPHA which actually never was
active even with the build flag on. The call to use this was never
called because the default initializer for GHOST was set to have it off
per default. Nothing called this function with a boolean value to enable it.
These cleanups are needed to support true headless OpenGL rendering.
Without these cleanups libepoxy will fail to load the correct OpenGL
Libraries as we have already linked them to the blender binary.
Reviewed By: Brecht, Campbell, Jeroen
Differential Revision: http://developer.blender.org/D15554
With libepoxy we can choose between EGL and GLX at runtime, as well as
dynamically open EGL and GLX libraries without linking to them.
This will make it possible to build with Wayland, EGL, GLVND support while
still running on systems that only have X11, GLX and libGL. It also paves
the way for headless rendering through EGL.
libepoxy is a new library dependency, and is included in the precompiled
libraries. GLEW is no longer a dependency, and WITH_SYSTEM_GLEW was removed.
Includes contributions by Brecht Van Lommel, Ray Molenkamp, Campbell Barton
and Sergey Sharybin.
Ref T76428
Differential Revision: https://developer.blender.org/D15291
When dropping file to sequencer timeline, coordinates for strip position
and overlap handling are used even if not set.
Reset internal state in on_drag_start callback and set is_modal
variable only if coordinates are updated. This way when dragging file
from external file browser, strip is added at current frame as before
modal operator was implemented.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D15333
Ensure render passes are allocated in the result prior to writing them.
Alternative could be to not write empty passes, but that is kind of
different from perspective of s one who reads the file.
Differential Revision: https://developer.blender.org/D15692
* Store compact ray differentials in ShaderData and compute full differentials
on demand. This reduces register pressure on the GPU.
* Remove BSDF differential code that was effectively doing nothing as the
differential orientation was discarded when making it compact.
This gives a 1-5% speedup with RTX A6000 + OptiX in our benchmarks, with the
bigger speedups in simpler scenes.
Renders appear to be identical except for the Both displacement option that
does both displacement and bump.
Differential Revision: https://developer.blender.org/D15677
Checking for the existence of and using __GLIBC_PREREQ can't be done in the
same conditional.
Contributed by listout.
Differential Revision: https://developer.blender.org/D15690
Need to update relations when modifiers are added or removed
since those create nodes in the dependency graph.
Added an assert statement to point at possible culprit so
that issues can be fixed more quickly.
The status bar keymap items still don't get translated because the
TIP_ translation introduced by rBe1974ae30e46 uses the wrong context:
it uses the default context, while the extraction introduced in
rB630b961f234e uses ID_WINDOWMANAGER.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15684
This is not dynamic: it only happens when the dir is added to the
list--automatically for recent files, and by the user for bookmarks.
Entries can then be manually renamed like other dirs. They will
keep the same name if the language is changed afterwards.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15629
Compared to the previous implementation this has a limit of 65536 lights
per scene. Lights exceeding this limit will be ignored.
This also introduce fine grained GPU light culling, making rendering
many lights in a scene more efficient as long they don't overlap much.
Compatible light panels have been unhidden.
Note: This commit does not include surface evaluation, only light culling.
These are meant to provide easy shape and AABB operation for culling.
They are currently incomplete but can be extended as one see fits.
The `common_debug_shape_lib.glsl` contains helper to draw thoses shapes.
Adjust static font details so that we can properly display Arabic
contextual letter forms. And so that alphabetical ligatures are loaded
from language-specific fonts.
See D15678 for more details
Differential Revision: https://developer.blender.org/D15678
Own Code.
In this case the array allocation would allocate an array of size zero.
This would then later lead to out of bounds memory reads.
Now the code will skip zero length allocations.
As the surface normal is calculated along with the coordinates, the
surface depth was always being used when surface orientation was set.
Therefore, even calculated, ignore the surface depth when it is not
required.
Also promote an optimization when neither orientation nor depth is required.
At least Depsgraph evaluation and liboverride diffing do process IDs in
parallel, so python code in py-defined properties should not access any
data outside of their owner ID.
Ref. T100203.
This patch causes the render buffers to be copied to the denoiser
device only once before denoising and output/display is then fed
from that single buffer on the denoiser device. That way usually all
but one copy (from all the render devices to the denoiser device)
can be eliminated, provided that the denoiser device is also the
display device (in which case interop is used to update the display).
As such this patch also adds some logic that tries to ensure the
chosen denoiser device is the same as the display device.
Differential Revision: https://developer.blender.org/D15657
Follow-up to design discussions here at the studio, add liboverride
operations into their own sub-menu, with three main entries:
- Create: Create, or enable for user editing, override hierarchies.
- Reset: Keep overrides data, but reset all local changes to the
reference linked data values.
- Clear: like reset, but also turn editable overrides back to system
overrides (aka non user editable).
Those three options can all operate either on the selected items, their
content only, or both.
Advanced operations are moved into a "Troubleshoot Hierarchy" sub-menu,
where one can resync, resync enforced, and fully delete library
overrides. Those operations always affect a whole override hierarchy,
regardless of which items are selected or not.
Library sorting from [0] caused WITH_GPU_BUILDTIME_SHADER_BUILDER
to fail. It's possible there are missing dependencies that caused
the change in order to break, for now revert that change.
[0]: 19b5524d1c
In complex scenes featuring thousands of connections between IDs in
their liboverride hierarchies (e.g. Heist files), the time required to
check if tree items were available (before allocated a new one) would
become insanely long (O(n^2)).
This commit brings it back to roughly a constant time, only re-checking
the whole array for unused items once in a while (once every 10k times
currently), since in almost all cases is the index after `lastused`
value is not unused, and you have reached the end of the currently used
array of items, you actually need to 'allocate' a new one anyway.
It also improves the handling of `lastused` index, in particular in
`tse_group_add_element`.
This makes switching to the Outliner override hierarchy view in Heist
scenes from virtually infinite time (more than 30mins for sure) to about
20 seconds on my machine. Still far from being effectively usable.
Note that this is only a bandaid fix anyway, root of the issue is that
this view has to deal with way too many items in its tree, current code
is not designed for that. Either outliner has to improve its tree
handling (by only building subsets of the whole tree maybe?), or we have
to cull/filter out some of the ID relationships between overridden IDs
to make this view actually usable. Maybe limit the depth of the tree?
Fix wrong assumption that 'embedded' IDs are only ever used by their
owners. This is especially not true with shape keys.
Also small optimization by adding an eraly abort when both IDs are the
same (i.e. an ID has a pointer to itself).
In some cases, there is a chance code already knows who might be the
owner of the given ID, in which case it can be more efficient to check
it first (especially in cases like embedded node trees or scene
collections, where the only other way is to loop over all possible
owners currently).
Will be used in next commit in some Outliner fix.
Since [0] (fix for T95591), the tweak tools fallback action used tweak
instead of press.
This was enabled so tools such as "Measure" & "Add Cube" could use
fallback tools (otherwise is wasn't possible to add a new ruler without
also selecting for e.g.), however this is of limited use since both
tools support dragging anywhere to activate, making them less useful
with other selection tools beside tweak (box/lasso for e.g.).
Resolve by disabling the fallback option for tools where using the
tweak tool to select is undesirable. Selection by clicking with
"Measure" & "Add Cube" is still supported as this is also set in the
3D view's key-map.
[0]: 0e51defcf4
In practice this is harmless as in most cases checking selected
vertices is enough, however as the intention is to check all 3 elements
it's best to do so.
Only lock access to our glyph caches per-font, rather than globally.
Also upgrade from spinlocks to mutexes.
See D15644 for more details.
Differential Revision: https://developer.blender.org/D15644
Reviewed by Brecht Van Lommel
This change allows the Cycles progress report system to take into conderation
the time limit property. This allows for more accuracte progress reports for
high sample count renders with short time limits.
Contributed by Alaska.
Differential Revision: https://developer.blender.org/D15599
GPU_exit is now expected to run within an active GPU context.
Also run BLF_exit and IMB_exit first they can use GPU resources and gave
ASAN errors. And remove redundant GPU_shader_free_builtin_shaders already
handled by GPU_exit.
This commit moves the hide status of mesh vertices, edges, and faces
from the `ME_FLAG` to optional generic boolean attributes. Storing this
data as generic attributes can significantly simplify and improve code,
as described in T95965.
The attributes are called `.hide_vert`, `.hide_edge`, and `.hide_poly`,
using the attribute name semantics discussed in T97452. The `.` prefix
means they are "UI attributes", so they still contain original data
edited by users, but they aren't meant to be accessed procedurally by
the user in arbitrary situations. They are also be hidden in the
spreadsheet and the attribute list by default,
Until 4.0, the attributes are still written to and read from the mesh
in the old way, so neither forward nor backward compatibility are
affected. This means memory requirements will be increased by one byte
per element when the hide status is used. When the flags are removed
completely, requirements will decrease when hiding is unused.
Further notes:
* Some code can be further simplified to skip some processing when the
hide attributes don't exist.
* The data is still stored in flags for `BMesh`, necessitating some
complexity in the conversion to and from `Mesh`.
* Access to the "hide" property of mesh elements in RNA is slower.
The separate boolean arrays should be used where possible.
Ref T95965
Differential Revision: https://developer.blender.org/D14685
Report T98781 and part of T97642: the MTLMaterial info only captures
image nodes and the default socket values. When the image information
is present, do not emit the socket defaults - the .MTL spec states
they are multiplied together, but the default value is not used
in blender when the socket is connected.
Also contains svn tests repository update to extend the test coverage,
and update test expectation outputs.
Take advantage of Waylands wl_keyboard_listener.enter callback which
takes an array of keys that are pressed when a window is activated.
Resolves T74684 under Wayland.
Always use modifier keys from the active window, as changes to the
modifiers aren't sent to inactive windows.
Also resolves modifier keys being lost on window de-activation.
Activating the window again would check the previous state of the
modifiers which was always cleared as of [0],
now clearing is no longer needed.
[0]: 472595f1d3
Font fallback feature not working after reverting the implementation
of the cache system. Missing an blf_ensure_face before
FT_Get_Char_Index. Otherwise glyphs not found in fonts without faces.
Own Code
When RMB select activated the selection tool, Alt-RMB would both
tweak and loop-select.
Fix/workaround this by passing though 'enumerate' unless the option
can be used (when selecting objects or armatures).
Migrate island calculation to #bm_uv_build_islands.
Simplify connectedness calculation.
Reduce memory pressure.
No functional changes.
See also: D15598
While T77801 itself is working as expected in the new C++ obj
importer, the repro file there uses absolute paths to material images,
yet the images themselves are right there in the current folder.
The old python based importer did find them, since it was doing a
really complex image search. My understanding is that while C++
importer was developed, it was decided to not do that -- however
just the "basename file in the mtl directory" sounds simple enough
and gets the repro case file work correctly.
Most of the functions in the compositor cryptomatte file are declared
with extern "C" linkage, which can cause symbol conflict even when
functions exist in separate namespaces. This is not actually necessary,
as the declaration of the few functions that require C linkage are
already declared as such in the header file, so this patch removes the
extern C scope from that file.
Differential Revision: https://developer.blender.org/D15656
Reviewed By: Clement Foucault
This patch allows the viewport compositor to operate in Material Preview
mode.
Differential Revision: https://developer.blender.org/D15655
Reviewed By: Clement Foucault
Fix a number of warnings reported by Clang Tidy in the realtime
compositor's code.
Differential Revision: https://developer.blender.org/D15654
Reviewed By: Clement Foucault
There is no need for these to be limited to -10..10, soft limits are enough.
Contributed by fundorin.
Differential Revision: https://developer.blender.org/D15650
As part of the previous fix (D15410), the importer got code to track
min & max vertex indices used as part of the mesh faces. However, if
faces refer to a "sparse" (i.e. non-contiguous) subset of all vertices,
then the imported mesh would contain all the vertices between min & max
range.
Replace that with proper tracking of actually used vertex indices
for each imported mesh. Fixes T100302.
This does affect import performance a tiny bit, e.g. importing Blender
3.0 splash scene goes 21.7s -> 22.1s, and importing rungholt.obj
goes 2.37s -> 2.48s.
Importer related tests have a bunch of vertex changes in them, since
now vertices are added in the order that the faces are referring
to them. Which incidentally matches the order that the Python based
importer was creating them too.
Solves long-standing issue when dependencies of disabled modifiers are
evaluated.
Simple test case: no drivers or animation. Manually enabling modifier
is expected to bring FPS up, enabling modifier will bring FPS (sine
evaluation can not be avoided)
F13336690
More complex test case: modifier visibility is driven by an animated
property. In am ideal world FPS during property being zero is fast
and when property is 1 the FPS is low.
F13336691.
Differential Revision: https://developer.blender.org/D15625
This patch adds a stub implementation for all unsupported nodes. The
inputs are passed through to the outputs where it make sense, while
other outputs will be allocated a single zero value.
This seems to be preferred by users as opposed to stopping execution and
displaying an error message.
Differential Revision: https://developer.blender.org/D15464
Reviewed By: Clement Foucault
This patch implements the following nodes for the realtime compositor:
- Map range node.
- Map value node.
- Math node.
- Normal node.
- Alpha convert node.
- Separate color node.
- Combine color node.
- Separate XYZ node.
- Combine XYZ node.
- Separate RGBA node.
- Combine RGBA node.
- Separate HSVA node.
- Combine HSVA node.
- Separate YCCA node.
- Combine YUVA node.
- Set alpha node.
- Switch node.
- Switch view node.
- RGB to BW node.
- Color ramp node.
Differential Revision: https://developer.blender.org/D15229
Reviewed By: Clement Foucault
This patch implements the following nodes for the realtime compositor:
- Image node.
- Movie clip node.
- Render layers node.
- RGB node.
- Scene time node.
- Value node.
Differential Revision: https://developer.blender.org/D15227
Reviewed By: Clement Foucault
This patch adds the core realtime compositor evaluator as well as a
compositor draw engine powered by the evaluator that operates in the
viewport. The realtime compositor is a new GPU accelerated compositor
that will be used to power the viewport compositor imminently as well as
the existing compositor in the future.
This patch only adds the evaluator and engine as an experimental
feature, the implementation of the nodes themselves will be committed
separately.
See T99210.
Differential Revision: https://developer.blender.org/D15206
Reviewed By: Clement Foucault
The fix from c0fdf16561 was missing in one place. We don't
want to free the edit mode pointers, those are just copied because the
edit mode changes aren't present in the actual original data-block.
The fix from c0fdf16561 was missing in one place. We don't
want to free the edit mode pointers, those are just copied because the
edit mode changes aren't present in the actual original data-block.
- Use references
- Reorder functions to remove unnecessary prototype
- Use the attribute API
- Use const where possible
- Split no-radius extraction a bit more, add multithreading
Detect cases where a ray-intersection would miss the current triangle, which if
the intersection is strictly watertight, implies that a neighboring triangle would
incorrectly be hit instead.
When that is detected, apply a ray-offset. The idea being that we only want to
introduce potential error from ray offsets if we really need to.
This work for BVH2 and Embree, as we are able to match the ray-interesction
bit-for-bit, though doing so for Embree requires ugly hacks. Tiny differences
like fused-multiply-add or dot product intrinstics in matrix inversion and ray
intersection needed to be matched exactly, so this is fragile.
Unfortunately we're not able to do the same for OptiX or MetalRT, since those
implementations are unknown (and possibly impossible to match as hardware
instructions). Still artifacts are much reduced, though not eliminated.
Ref T97259
Differential Revision: https://developer.blender.org/D15559
The performance of this will be slightly more important for upcoming changes.
Also removed an unused function and changed includes so these system.h can
be included in more places.
These replace float3 and packed_float3 in various places in the kernel where a
spectral color representation will be used in the future. That representation
will require more than 3 channels and conversion to from/RGB. The kernel code
was refactored to remove the assumption that Spectrum and RGB colors are the
same thing.
There are no functional changes, Spectrum is still a float3 and the conversion
functions are no-ops.
Differential Revision: https://developer.blender.org/D15535
Now all the same ones are available on CPU and GPU, which was previously not
possible due to lack of operator overloadng in OpenCL. Print functions are
no-ops on some GPUs.
Ref D15535
Currently, the compositor can be disabled using the WITH_COMPOSITOR
build option. Since, we intent to always build the realtime compositor,
we need to make the distinction between both compositors clear.
So this patch renames the option to WITH_COMPOSITOR_CPU. Additionally,
the check for the option was moved inside the compositor modules' own
CMake file in preparation for the realtime compositor code.
Differential Revision: https://developer.blender.org/D15622
Reviewed By: Jeroen Bakker, Ray Molenkamp
Caused by 38af5b0501.
Adjust barycentric coordinates used for intersection result in the
ray-to-rectangle intersection check.
Differential Revision: https://developer.blender.org/D15592
This is a complete rewrite of the draw debug drawing module in C++.
It uses `GPUStorageBuf` to store the data to be drawn and use indirect
drawing. This makes it easier to do a mirror API for GPU shaders.
The C++ API class is exposed through `draw_debug.hh` and should be used
when possible in new code.
However, the debug drawing will not work for platform not yet supporting
`GPUStorageBuf`. Also keep in mind that this module must only be used
in debug build for performance and compatibility reasons.
- "Name collisions" label in mesh properties
- "Threshold" labels in Vertex Weight Edit modifier
- "Particle System" label in Particle Instance modifier
- Slot number in the Shader Editor
- Status bar keymap items during modal operations:
add TIP_() macro to status bar interface template
- On dumping messages, sort preset files so their messages are stable
between runs
Ref. T43295
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15607
It is currently impossible to access modal keymaps' event values (from
`propvalue` enum) from python code (for API introspection).
This is needed for i18n messages extraction (see D15607).
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D15643
Messages from the bpy.types.Window class were blacklisted in the
message extraction script.
This change allows a few new messages to be translated, including at
least two which show up in the UI. There are only 12 new messages in
the .po files, so even if some never need to be translated, that's not
too many.
Ref. T43295
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15628
- "Name collisions" label in mesh properties
- "Threshold" labels in Vertex Weight Edit modifier
- "Particle System" label in Particle Instance modifier
- Slot number in the Shader Editor
- Status bar keymap items during modal operations:
add TIP_() macro to status bar interface template
- On dumping messages, sort preset files so their messages are stable
between runs
Ref. T43295
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15607
It is currently impossible to access modal keymaps' event values (from
`propvalue` enum) from python code (for API introspection).
This is needed for i18n messages extraction (see D15607).
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D15643
Messages from the bpy.types.Window class were blacklisted in the
message extraction script.
This change allows a few new messages to be translated, including at
least two which show up in the UI. There are only 12 new messages in
the .po files, so even if some never need to be translated, that's not
too many.
Ref. T43295
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15628
Remove the FreeType cache implementation. Not multithreading correctly.
Original commit: 9d77b5a0ed
See D15647 for more details.
Differential Revision: https://developer.blender.org/D15647
Own Code.
Mixing view interpolation with finishing smooth-view caused arguments
to be passed in that only made sense for one of these cases.
This also makes the intention of the callers clearer.
- view3d_smoothview_apply_with_interp
- view3d_smoothview_apply_and_finish
- view3d_smoothview_apply_from_timer
Also rename 'step' to 'factor` and use `interpf` for blending values.
Properly deal with FreeType cache flushing a font's ft_size. Set this
to NULL in finalizer, and add a blf_ensure_size to make sure it
exists only when needed.
See D15639 for more details.
Differential Revision: https://developer.blender.org/D15639
Reviewed by Brecht Van Lommel
Smooth-view wasn't working properly with a locked-camera this could
animate from the wrong position if the camera wasn't in sync with the
underlying viewport transformation.
Resolve issues for:
- VIEW3D_OT_view_orbit
- VIEW3D_OT_view_roll
- VIEW3D_OT_zoom_border
Support pushing undo steps for smooth-view operations that manipulate
the camera. Now V3D_SmoothParams take optional undo arguments.
Used for:
- VIEW3D_OT_view_center_cursor
- VIEW3D_OT_view_center_pick
- VIEW3D_OT_view_orbit
- VIEW3D_OT_view_roll
- VIEW3D_OT_zoom_border
Follow up fix for T92099.
The shader value node always outputs zero in some cases even when its
value is not zero.
This is caused by b639e60864. In that
commit, the behavior of GPU node linking changed such that unlinked
sockets get their value from their associated GPU node stack instead of
the socket itself. But execution node stacks do not always have their
output values initialized, and since the value node stores its value in
its output, it follows that its uniform value will be wrong.
This patch fixes that by getting the value directly from the socket.
This is also done fro the RGBA node, since it is implemented similarly.
Finally, the GPU_uniformbuf_link_out function was removed since it is no
longer used and does not make sense anymore.
Differential Revision: https://developer.blender.org/D15641
Reviewed By: Clement
Caused by {rB791bfae1d64b}.
The solution was to create the special handle for the Move Clip and Mask
transformation.
One change that cannot be reversed is showing the `G` shortcut in the
statusbar.
But the description of this shortcut was not even correct before.
Always use the image datablock filepath for saving. The only apparent reason
use the image buffer file path is image sequences, for which the current frame
filepath is now computed.
zebin format is critical for the compatibility of AoT graphics binaries
across driver versions. It was previously disabled on Linux due to
runtime issues that are now fixed in
https://github.com/intel/compute-runtime/releases/tag/22.31.23852.
The minimum supported driver version isn't bumped to this one yet as
current codebase with current IGC compiler does actually run fine on
earlier drivers and is not running into these issues anymore.
Also add an error message for when the node is used on non-curves
objects, since there's nothing in the UI to show why it doesn't work
except for that. And also use quotes when referring to attribute names.
Remove "Material Icons" font file, mistakenly added.
See D15627 for details
Differential Revision: https://developer.blender.org/D15627
Reviewed by Brecht Van Lommel
This reverts commit 94866ef84f
A number of reports of bevel regressions came after the
commit to fix bevel intersection continuity.
Since the fix for some of those regressions is not obvious
we will revert the continuity improvement and do it as
part of the Bevel V2 project.
This patch removes the [rather confusing] separate checkbox for enclosed
shapes in favour of integrating that option into illumination filtering,
with the benefit of not limiting the selection to cached result.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D15327
Supports undo step generation while navigating in locked camera view.
NDOF & track-pad navigation are not included for now.
Actions that uses smooth view can be supported but are outside
the scope of this change, includes undo push for:
- VIEW3D_OT_view_pan
- VIEW3D_OT_dolly
- VIEW3D_OT_fly
- VIEW3D_OT_move
- VIEW3D_OT_rotate
- VIEW3D_OT_walk
- VIEW3D_OT_zoom
Reviewed by: campbellbarton
Ref D15345
Adds support for extrusion from more than one edge and from inner
lattice legs. Also fixes extrusion from one point. Implemented in two
steps. At first so called "copy intervals" are calculated according to
selected control points. Then those are used to copy control points to
the new surface patch. See the differential revision for a video.
Differential Revision: https://developer.blender.org/D15524
Copy the improved hair curves sync implementation from D14942. That patch is
not ready as a whole but this part was verified to match the old hair particles
can be used already.
Evaluating a compositor node tree in background mode causes the stats callback
to be called from multiple threads, leading to garbled output. This was causing
major problems with render-farm scripts.
Differential Revision: https://developer.blender.org/D15633
It should consistently use the Cycles pirmitive ID for self intersection detection,
not the one from the OptiX or Embree acceleration structure.
Differential Revision: https://developer.blender.org/D15632
This replace the previous square rings approach by sampling a disk the
footprint of the search area. This avoids sampling in areas in corners
where there isn't any weight.
This results in much less samples needed to acheive a good enough result.
The max number of samples for an area of 11x11 px is hard coded to 16 and
still gives good results with the final clamp.
The number of samples is adaptative and is scaled by the search area (max
CoC).
The High Quality Slight Defocus is not required anymore. If there is a
quality parameter to add, it would be sample count option. But I consider
the temporal stability enough for viewport work and render can still
render many full scene samples. So I don't see a need for that yet.
This adds anti-flicker pass to the slight focus region by using the
temporaly stable output from stabilize pass.
This also fixes the bilateral weight factor which was reversed.
This was caused by a missing synchronization.
The background gather pass was writting to the same occlusion texture
before the end of the scatter draw.
This implement a full TAA pass on the depth of field input.
An history buffer is kept for each view needing Depth of field.
This uses a swap with a `TextureFromPool` in order to not always 2
textures allocated.
Since this uses luma weighting without any input, the firefly parameter is
now obsolete and has been removed.
There is some tiny difference with the Film TAA so the implementation is
mostly copy pasted.
Also this implementation uses a LDS cache to speedup the TAA computations.
This moves the slight focus max in tile from the setup pass to the
resolve pass. This reduces complexity as there is no need for an extra
component in the tile textures.
This also avoids skipping any pixels and makes sure the local max matches
the dispatched local group size. This should make the resolve pass a little
bit faster.
Channel selection in graph editor was broken by rB3c5620aabd33 because
the selection took into account grease pencil channels. Such channels
are now removed from selection in containers that does not use them (NLA
and Graph Editor).
Grouping was broken from a similar issue. The grouping operation now
completely filters out grease pencil channels since the operator is only
defined for f-curve channels.
Reviewed By: sybren
Maniphest Tasks: T100093
Differential Revision: https://developer.blender.org/D15601
In {rB0ef8a6179d2a773b2570352bd0cb7eb18b666da2} the parameter name was
changed to match the header declaration (slot) but it missed updating
the variable name inside the function correctly in one instance.
This prevents slot 0 from being cleared if the last slot to be rendered
was not also 0.
Differential Revision: https://developer.blender.org/D15620
This simply adds the name of the incorrect parameter to the error message.
Differential Revision: https://developer.blender.org/D14103
Reviewed by Jeroen Bakker
After recent refactors to mesh normals (cfa53e0fbe), they are no
longer stored in CustomData. A mechanism to compute them eagerly
should be implemented another way.
Implementation of the FreeType 2 cache subsystem, which limits the
number of concurrently-opened FT_Face and FT_Size objects, as well as
caching information like character maps to speed up glyph id lookups.
See D13137 for much more detail.
Differential Revision: https://developer.blender.org/D13137
Reviewed by Brecht Van Lommel
Assume that all faces using the smae material form a closed mesh, so that
joining meshes gives the same result as separate meshes.
It does mean that using different materials on different sides of one
closed mesh do not work, but the meaning of that is poorly defined anyway
if there is a volume interior.
Added logic to the USD Preview Surface importer to
convert UDIM textures.
Reviewed by: Sybren and Jesse
Differential Revision: https://developer.blender.org/D15379
- batch rename
- keyframe settings
- tool name in Tool properties header
- tool name in Tool properties Drag (fake) enum
- new file templates
- new preset
- new text datablock
- new collection datablock
- new geometry nodes (modifier and node group)
- new grease pencil data (layers and materials)
Ref. T43295
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15533
NOTE: This is committed to the 3.3 branch as decided by Bastien, Dalai
and me. That is because these are important usability fixes/improvements
to have for the LTS release.
Part of T95802.
Showing properties with an RNA path in the UI isn't very user friendly.
Instead, represent the RNA path as a tree, merging together parts of the
RNA path that are shared by multiple properties. Properties and "groups"
(RNA structs/pointers) are now shown with their UI name and an icon if
any. The actually overridden properties still show the Library Overrides
icon. See the patch for screenshots.
Also: When a RNA collection item, like a modifier or constraint was
added via a library override, indicate that item and show all collection
items in the list, since the complete list of items and their orders may
be important context.
Differential Revision: https://developer.blender.org/D15606
NOTE: This is committed to the 3.3 branch as part of D15606, which we
decided should go to this release still (by Bastien, Dalai and me). That
is because these are important usability fixes/improvements to have for
the LTS release.
Adds `rna_path.cc` and `RNA_path.h`.
`rna_access.c` is a quite big file, which makes it rather hard and
inconvenient to navigate. RNA path functions form a nicely coherent unit
that can stand well on it's own, so it makes sense to split them off to
mitigate the problem. Moreover, I was looking into refactoring the quite
convoluted/overloaded `rna_path_parse()`, and found that some C++
features may help greatly with that. So having that code compile in C++
would be helpful to attempt that.
Differential Revision: https://developer.blender.org/D15540
Reviewed by: Brecht Van Lommel, Campbell Barton, Bastien Montagne
NOTE: This is committed to the 3.3 branch as part of D15606, which we
decided should go to this release still (by Bastien, Dalai and me). That
is because these are important usability fixes/improvements to have for
the LTS release.
This basically lets the UI use the constraint or modifier icon, whenever
refering to constraints/modifiers via RNA pointers. Used by D15606, so
that the "Modifiers" tree element to group the individual modifiers
together gets the right icon without hardcoded handling.
No user visible changes expected.
NOTE: This is committed to the 3.3 branch as part of D15606, which we
decided should go to this release still (by Bastien, Dalai and me). That
is because these are important usability fixes/improvements to have for
the LTS release.
We have a bunch of "base" element types, just to show a label element
for grouping together other elements. There is no reason to have these
tied to a case, just have a generic label type for this. It requires a
string to display, and can display an icon too. The new element type
isn't used yet, but will be in one of the following commits. Would be
nice if the existing base elements can be replaced by this.
Part of D15606.
This changes makes it possible to copy evaluated result and put it
to the original bmain.
Prior to this change from the API point of view there was false
perception that it is possible, while in practice it was very fragile:
it only worked if the ID did not reference any evaluated IDs.
This change makes it so `id.copy()` Python API call will make it so
the copied ID only references original data-blocks. This sounds a bit
implicit, so here is motivational aspect why it is considered better
approach to all other:
- There needs to be a way to support the described scenario, in the
lest fragile way. Requiring to always use an explicit function call
or an argument is too verbose and is easy to be missed.
- The `id.copy()` is already doing implicit thing: it always adds the
result to the bmain. So it might as well ensure the copied result
does not reference evaluated data-blocks.
- Added clarity in the documentation should address possible confusion.
The limitation of this change is that the copy() of evaluated geometry
will clear its reference to the shape key. This is because the key is
only referenced for validness of RNA paths for drivers and the key
itself might not match topology of evaluated geometry due to modifiers.
Differential Revision: https://developer.blender.org/D15611
Part of T95802.
Showing properties with an RNA path in the UI isn't very user friendly.
Instead, represent the RNA path as a tree, merging together parts of the
RNA path that are shared by multiple properties. Properties and "groups"
(RNA structs/pointers) are now shown with their UI name and an icon if
any. The actually overridden properties still show the Library Overrides
icon. See the patch for screenshots.
Also: When a RNA collection item, like a modifier or constraint was
added via a library override, indicate that item and show all collection
items in the list, since the complete list of items and their orders may
be important context.
Differential Revision: https://developer.blender.org/D15606
It's not obvious that override property operations are recreated on undo
pushes, which caused me some confusion. Comment on this, so it's clear
that pointers to the operations shouldn't be stored.
This basically lets the UI use the constraint or modifier icon, whenever
refering to constraints/modifiers via RNA pointers. Used by D15606, so
that the "Modifiers" tree element to group the individual modifiers
together gets the right icon without hardcoded handling.
No user visible changes expected.
Adds a function that prints the "path" of an element, that is, the
ancestor elements starting from the root, separated by slashes. This can
be useful for debugging. The function isn't used.
No user visible changes expected.
We have a bunch of "base" element types, just to show a label element
for grouping together other elements. There is no reason to have these
tied to a case, just have a generic label type for this. It requires a
string to display, and can display an icon too. The new element type
isn't used yet, but will be in one of the following commits. Would be
nice if the existing base elements can be replaced by this.
Part of D15606.
Add specific modal keyitem for Vert/Edge Slide or TrackBall.
Note that there is a workround to avoid repeated keys in the status bar.
Reviewed By: campbellbarton
Maniphest Tasks: T100129
Differential Revision: https://developer.blender.org/D15597
Add specific modal keyitem for Vert/Edge Slide or TrackBall.
Note that there is a workround to avoid repeated keys in the status bar.
Reviewed By: campbellbarton
Maniphest Tasks: T100129
Differential Revision: https://developer.blender.org/D15597
Paths that contained characters that needed escaping as URL's failed
to import.
Move URL decoding to a new file (GHOST_PathUtils), shared with X11 but
maybe be useful for other platforms too.
Drag & drop worked with GTK3 apps but not QT5 (pcmanfm-qt for eg)
as files are separated by '\n' instead of '\r\n'.
Resolve by supporting both (follow up to T99737).
We have plenty of sorta generic functions, that allocate memory with
some generic name for debugging. When such a function is called and the
memory leaks, it may be unclear which call to it allocated the unfreed
memory (and thus which execution path leads to the leak).
The added function is only available if `NDEBUG` is not defined.
Differential Revision: https://developer.blender.org/D15605
Reviewed by: Sergey Sharybin, Bastien Montagne
Various situations can lead to un-saved UDIM tiles potentially losing
their contents. The most notable situation is a save and re-load of a
.blend file that has "generated" UDIM tiles that haven't been written to
disk yet. Normal "generated" images are reconstructed on demand in these
circumstances but UDIM tiles do not retain the information required for
reconstruction and empty tiles are presented to the user.
This patch stores the generated type information for each tile to solve
this particular issue. It also shifts the Image generation info into the
1st tile. The existing DNA fields are deprecated but RNA was modified as
to not break API compat.
There's two broad changes here that merit special callout:
- How to distinguish between a tile that should be reconstructed vs.
a tile that should remain empty because loading failed for the UDIMs
- How to better handle Image Source changes
The first issue is addressed as follows:
- Each time a tile is filled with generated content we set a new
IMA_GEN_TILE flag
- Each time a tile is saved to disk we remove the IMA_GEN_TILE flag
- When requesting an ibuf: If the ibuf is null, we check to see if
IMA_GEN_TILE is set. If it is set, go ahead and re-create the tile.
Otherwise, do nothing.
The second set of changes have to do with ensuring that information is
carried along as far as possible when the, sometimes destructive, act of
changing an Image Source is performed. Behavior should be a bit more
natural and expected now; though users will rarely, or should rarely, be
modifying this property. The full table describing the behavior is in
the differential.
Differential Revision: https://developer.blender.org/D14885
Winding was originally added to island detection in 5197aa04c6.
However the sculpt tools can flip faces, potentially creating orphaned
islands if winding is enabled.
Differential Revision: https://developer.blender.org/D15600
Due to a recent change, empty strings are unhandled. This results
in Blender crashing.
This patch fixes the crash but a discrepancy still exists...
Prior to the regression, the empty string would be replaced by the
name of the data type. This patch uses "Attribute" for the default
name regardless of type. Restoring the previous behavior would
require making and/or modifying API methods.
Regression introduced in: rBeae36be372a6
Reviewed By: Joseph Eagar & Campbell Barton
Differential Revision: https://developer.blender.org/D14734
Ref D14734
The `DefaultMixer` for mixing generic data types has some issues:
1. The full buffer is always zeroed, even if only some is used.
2. Finalizing also works on all values, even if only some are used.
3. "mixing" doesn't allow setting the first value, requiring that
everything is cleared beforehand.
This commit adds the following functionality:
1. Constructor with the specified `IndexMask` for preliminary zeroing.
2. `set` method to overwrite the value.
3. `finalize` with the specified mask to process a subset of values.
This is useful in situations where you want to use the
DefaultMixer without having to overwrite all the values many times.
A performance improvement was observed for NURBS curve evaluation and
attribute interpolation from the point to curve domain of about 15% and
35% respectively (100,000 curves).
Differential Revision: https://developer.blender.org/D15434
The sequencer OpenGL viewport renders would not render the metadata into
the image even if the option was on.
Did minor cleanups in the render function as well.
Happens after recent changes in the area.
The asserts were a bit too strict and were against the way how the
ID_RECALC_ALL is handled. So remove them with explanation why things
needs to be silent.
The Python based exporter was replacing spaces with underscores
in object/group names, mostly to handle cases where names could begin
or end with spaces. The new exporter was not doing that. Note: spaces
in material names were already handled by the new exporter.
Fixes T97769. Updated test coverage expectations; one of the test
files has an object with a space in the name.
Add IMB_gpu_get_texture_format and GPU_texture_format_description to
retrieve and 'stringify' an eGPUTextureFormat. These are then used in the
image info panel used in several areas across blender.
New Information:
{F13330937}
Reviewed By: jbakker
Maniphest Tasks: T99998
Differential Revision: https://developer.blender.org/D15575
Timeline marker names are now correctly clipped instead of messily
overlapping each other and being unreadable. This change affects all
the animation editors (graph editor, NLA, action editor etc.) as well
as the VSE.
This also makes a change to when text is elevated. In the previous
behavior, a marker's text would be elevated if it was selected or if
the current frame was <= 4 frames away from the marker. This seems
like a completely arbitrary thing (probably added in to alleviate text
overlapping for markers that the user would be interested in). This
patch changes the behavior such that the marker's text will be elevated
if it is either selected or it is the last marker encountered relative
to the current frame.
When searching for closest UDIM with integer co-ordinates, several UDIMs
can be equidistant. Previously, of all closest UDIMs, the one which was
earliest in the list would be used. Now, "half-open interval" rules are
used to break the tie.
Motivated by 0fcc04e7bf
Differential Revision: https://developer.blender.org/D15590
The virtual array created by the implicit conversions had a lot of
overhead when converting many values. Implement "materialize"
functions to avoid a virtual function call for every element.
This gave me a 20x improvement when copying the values
from a float attribute as a boolean, though I doubt there are
any real world situations where it's that noticible.
This is a port of the previous implementation but using compute
shaders instead of using the raster pipeline for every steps.
Only the scatter passes is kept as a raster pass for obvious performance
reasons.
Many steps have been rewritten to take advantage of LDS which allows faster
and simpler downsampling and filtering for some passes.
A new stabilize phase has been separated from another setup pass in order
to improve it in the future with better stabilization.
The scatter pass shaders and pipeline also changed. We now use indirect
drawcall to draw quads using triangle strips primitives. This reduces
fragment shader invocation count & overdraw compared to a bounding
triangle. This also reduces the amount of vertex shader invocation
drastically to the bare minimum instead of having always 3 verts per
4 pixels (for each ground).
This updates image bind tracking to be the same as texture binds.
Adding a new bind flag to avoid conflict when the texture is used in
both slots.
Fixes a gl error in glBindImageTextures about invalid image binds.
Replaces `DRW_shgroup_call_procedural_triangles_indirect`.
This makes the indirect drawing more flexible.
Not all primitive types are supported but it is just a matter of adding
them.
The specific functions for vertex colors and and sculpt vertex colors
can be replaced by more generic attribute functions internally.
Also remove a paramter from one function.
The "Color Attributes" system from f7bbc7cdbb has replaced
both "Sculpt Vertex Colors" and "Vertex Colors" in the UI. The Operators
for adding and removing them are unused now.
This commit does not break backwards compatibility with the Python
API, it only removes the operators, which generally aren't used by
addons anyway. The mesh RNA properties will be removed in 4.0 (T100153).
Differential Revision: https://developer.blender.org/D15077
Instead of passing pointers to specific mesh data, rely on
retrieving that data from the mesh internally. This makes
it easier to support retrieving additional data from Mesh
(like active attribute names in D15101 or D15169). It also makes
the functions simpler conceptually, because they're drawing
a mesh with an acceleration strcture on top.
The BKE_id_attribute_copy_domains_temp call was unnecessary
because the GPU_pbvh_mesh_buffers_update function was only
called when Mesh/PBVH_FACES is used in the first place.
Differential Revision: https://developer.blender.org/D15197
When dropping file to sequencer timeline, coordinates for strip position
and overlap handling are used even if not set.
Reset internal state in on_drag_start callback and set is_modal
variable only if coordinates are updated. This way when dragging file
from external file browser, strip is added at current frame as before
modal operator was implemented.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D15333
Mask and color brushes were using the existing PBVH vertex "update tag"
to mark their modifications. This was mostly unnecessary, and causes
unnecessary calculation of normals. It also caused errors though,
because they didn't tag the corresponding PBVH node for normal
recalculation, causing problems on the borders of nodes, since one
node might accumulate into another's vertex normals, but the other
node wouldn't also accumulate and normalize the normals.
The solution is to only use the update tag for tagging deformed
vertices that need recalculated normals. Everything else is handled at
the PBVH node level (which was already the case, but it wasn't clear).
The update tag was also used for undo to tag the nodes corresponding to
changed vertices. This was wrong though, because normals and visibility
would also be recalculated for just color or mask undo steps. Instead,
just use local arrays to map from vertices to nodes.
Differential Revision: https://developer.blender.org/D15581
Since 1a81d268a1, materials on object data can change during
evaluation. But a different function is necessary to retrieve materials
taking that into account.
Solves part of T96721.
Differential Revision: https://developer.blender.org/D15595
Part of {T84999}
This patch adds test for
- `dissolve_limited`
- `dissolve_mode`
- `merge_normals`
Updated blend file:
{F13162744}
Reviewed By: zazizizou, mont29
Differential Revision: https://developer.blender.org/D15187
Now when an ID template is set to an override ID, `Shift-Click` on the
right button toggles between making it user-editable (if it's a system
override), or clearing any user edit and setting it back to system override.
Because of the recent changes to our core fonts,
Freetype has to support Woff2 fonts or Blender will segfault on startup.
This adds an explicit check for this to inform people compiling Blender
about this requirement.
Caused by 38af5b0501.
Adjust barycentric coordinates used for intersection result in the
ray-to-rectangle intersection check.
Differential Revision: https://developer.blender.org/D15592
This loosens the current implementation a bit to only force optimal
display when editing on cage. It used to be any editing mode.
Brings GPU based subdivision closer to the CPU version.
Note that ideally, we should have a protection mechnism at global RNA
level, making e.g. any evaluated data read-only... But for now, give
better (and more consistent) protection for the collections' link/unlink
of children collections and objects.
The filter was missing in some places that are using channel data as if it was f-curve channel.
There seems to be no related issue or bug, but still it would be best to have them there.
Reviewed By: sybren
Differential Revision: http://developer.blender.org/D15505
The tagging code was iterating over bits set in the ID_RECALC_ALL and
was casting the flag to IDRecalcFlag. This was triggering an undefined
behavior warning in Clang since the bit might not have a corresponding
value in the enumerator.
The solution is to pre-define all reacalc flags for all bits. While
this seems a bit annoying this seems to be the least fragile solution
from all suggested ones.
Differential Revision: https://developer.blender.org/D15602
Always use unsigned int for the recalc flags. This allows to use
all 32 bit of integer for the flags without worrying about the
sign. Use full notation of `unsigned int` instead of short `uint`
to avoid pulling more headers in.
Whenever depsgraph API allows passing combined recalc flags call
the variable `flags` and use `unsigned int` type for it. For a
single flag use `IDRecalcFlag` flag.
No functional changes expected.
For SVG is very convenient to be able to import several SVG in one operation. Each SVG is imported as a new Grease Pencil object.
Also, now the SVG file name is used as Object name.
Important: As all SVG imported are converted to Grease Pencil object in the same location of the 3D cursor, the SVG imported are not moved and the result may require a manual fix of location. The same is applied for depth order, the files are imported in alphabetic order according to the File list.
Reviewed By: mendio, pepeland
Differential Revision: https://developer.blender.org/D14865
Python based OBJ importer, as well as glTF2 importer, are creating
"placeholder" images for texture images that can't be found. These
are empty textures (displayed as magenta), but with their file paths
set so that File > External Data > Report Missing Files can report
them as missing.
Make the new C++ OBJ importer do the same as well. Fixes T99502.
This is a partial fix for T90535.
USD allows binding materials generically as well as for a
specific purpose. I.e., purpose may be generic (unspecified)
or one of
- Full: truest representation of the scene
- Preview: lightweight material for preview
Curently, only generically bound materials, with unspecified
purpose (allPurpose), are imported. This issue is preventing
preview materials from being imported in the Alab scene.
This patch adds logic to attempt to fall back on importing
preview or full materials, in that order, if there is no
generic material bound to the mesh.
Reviewed by: Sybren
Differential Revision: https://developer.blender.org/D15352
Affected by rB8621fdb10dc4
Crash if single-user data is created when we apply transform
on multi-user image data. Crash occurs because creation of new copy
was not handled in `single_obdata_users` for empty objects (image for example)
Reviewed By: dfelinto, mont29
Maniphest Tasks: T100040
Differential Revision: https://developer.blender.org/D15587
Although eevee-next is disabled in Blender 3.3 there is an error that is
visible when compiling shaders using the shader builder.
This is because of an error in a preprocessing directive (defined should
be define).
Presets are used all over the Blender UI, but were so far untranslatable.
This adds the translation code as well as a new `dump_preset_messages()` function in the message extraction. This goes over all bundled preset file names and extracts them.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15570
This is the same principle as D15418 and D15532, but this time it's
only really needed for "IK".
Nevertheless it's probably good to add them anyway in case they get
renamed and don't share a translation with other messages somewhere
else in the code, for instance if it is decided that new constraint names
shouldn’t include spaces, like other data do.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15571
Pretty much like D15418: add `N_()` macro around names for
Grease Pencil modifiers and shader FX.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15532
Recently, performance with oneAPI have regressed due some recent
changes in Blender itself. This commit's changes is resolving this
and also improve compilation time for oneAPI backend first
execution (or Blender compilation time in case of AoT).
Regression have appeared after 5152c7c152 and not related to the
changes itself, but increase of kernels complexity introduced with
it. Changes in this commit is marking some Blender functions as
noinlined for oneAPI backend, which helps GPU compiler to deal with
this complexity without any negative side-effects on performance.
The Python based importer had logic to immediately turn image paths
into relative-to-blender-file paths, if user preference for relative
paths is used (which is on by default). The new importer code did not
have that. Fixes T100076.
2022-08-01 13:39:08 +03:00
2204 changed files with 81636 additions and 155778 deletions
option(WITH_INPUT_NDOF"Enable NDOF input devices (SpaceNavigator and friends)"ON)
if(UNIXANDNOTAPPLE)
option(WITH_INSTALL_PORTABLE"Install redistributeable runtime, otherwise install into CMAKE_INSTALL_PREFIX"ON)
option(WITH_INSTALL_PORTABLE"Install redistributable runtime, otherwise install into CMAKE_INSTALL_PREFIX"ON)
option(WITH_STATIC_LIBS"Try to link with static libraries, as much as possible, to make blender more portable across distributions"OFF)
if(WITH_STATIC_LIBS)
option(WITH_BOOST_ICU"Boost uses ICU library (required for linking with static Boost built with libicu)."OFF)
@@ -437,10 +435,16 @@ if(NOT APPLE)
option(WITH_CYCLES_CUBIN_COMPILER"Build cubins with nvrtc based compiler instead of nvcc"OFF)
option(WITH_CYCLES_CUDA_BUILD_SERIAL"Build cubins one after another (useful on machines with limited RAM)"OFF)
option(WITH_CUDA_DYNLOAD"Dynamically load CUDA libraries at runtime (for developers, makes cuda-gdb work)"ON)
set(OPTIX_ROOT_DIR""CACHEPATH"Path to the OptiX SDK root directory, for building Cycles OptiX kernels.")
set(CYCLES_RUNTIME_OPTIX_ROOT_DIR""CACHEPATH"Path to the OptiX SDK root directory. When set, this path will be used at runtime to compile OptiX kernels.")
mark_as_advanced(CYCLES_CUDA_BINARIES_ARCH)
mark_as_advanced(WITH_CYCLES_CUBIN_COMPILER)
mark_as_advanced(WITH_CYCLES_CUDA_BUILD_SERIAL)
mark_as_advanced(WITH_CUDA_DYNLOAD)
mark_as_advanced(OPTIX_ROOT_DIR)
mark_as_advanced(CYCLES_RUNTIME_OPTIX_ROOT_DIR)
endif()
# AMD HIP
@@ -464,8 +468,8 @@ if(NOT APPLE)
option(WITH_CYCLES_ONEAPI_SYCL_HOST_ENABLED"Enable use of SYCL host (CPU) device execution by oneAPI implementation. This option is for debugging purposes and impacts GPU execution."OFF)
('SOBOL',"Sobol","Use Sobol random sampling pattern",0),
('SOBOL',"Sobol-Burley","Use Sobol-Burley random sampling pattern",0),
('PROGRESSIVE_MULTI_JITTER',"Progressive Multi-Jitter","Use Progressive Multi-Jitter random sampling pattern",1),
)
@@ -381,7 +381,7 @@ class CyclesRenderSettings(bpy.types.PropertyGroup):
sampling_pattern:EnumProperty(
name="Sampling Pattern",
description="Random sampling pattern used by the integrator. When adaptive sampling is enabled, Progressive Multi-Jitter is always used instead of Sobol",
description="Random sampling pattern used by the integrator. When adaptive sampling is enabled, Progressive Multi-Jitter is always used instead of Sobol-Burley",
items=enum_sampling_pattern,
default='PROGRESSIVE_MULTI_JITTER',
)
@@ -1558,7 +1558,7 @@ class CyclesPreferences(bpy.types.AddonPreferences):
importsys
col.label(text="Requires Intel GPU with Xe-HPG architecture",icon='BLANK1')
ifsys.platform.startswith("win"):
col.label(text="and Windows driver version 101.1660 or newer",icon='BLANK1')
col.label(text="and Windows driver version 101.3268 or newer",icon='BLANK1')
elifsys.platform.startswith("linux"):
col.label(text="and Linux driver version xx.xx.23570 or newer",icon='BLANK1')
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
