The crash happens because the origindex layers created as part of
the modifier stack evaluation are not set in the `MeshRenderData` when
they should have been.
This is because when selecting in X-ray mode, a subdivision wrapper
is created to ensure that selection happens with a subdivided
geometry, and this replaces the `MDATA` wrapper which is also used to
setup the `MeshRenderData`.
As we do not seemingly have an `MDATA` wrapper, the draw code decides
that we can extract draw buffers directly from the BMesh, instead of
the mapped Mesh with origin indices layers.
To fix this, we should also consider to use mapped extraction if a
subdivision wrapper exists on the mesh.
Differential Revision: https://developer.blender.org/D14485
There were multiple issues at hand here:
- The default value has been changed to `{0, 0, 1}` see: rB25f1783673de636a6f0ca4457df8c05bc685981a
- The output needs the subtype set `PROP_DIRECTION`
- The noder properties were missing in `node_composit_set_butfunc`
Fixes T96860
The lines paint mask IBO extraction was not implemented for GPU subdivision.
For it to work, we also now need to preserve the subdivision loop to
subdivision edge map, which until now was overwritten to store coarse edges
(the map to coarse edges is still preserved).
Also the paint flag stored in the 4th dimension of the loop normal buffer
was not properly set for flat shaded faces, leading to other kind of
artefacts and render issues.
The problem was when the stroke had less weights that the total number of vertex groups.
The API checked the total number of groups, but this is not required because `BKE_defvert_find_index` returns NULL is the vertex group index does not exist.
Regression in [0], also use pad buffer by 1 instead of 2 which is no
longer needed as the trailing slash is no longer added
after allocating the string.
0682af0d63
This was a mistake in the conditional structure introduced in 4b35d6950d
This commit also adds a new type of snap exclusion: `SNAP_NOT_EDITED`.
Thanks to @Ethan1080 for pointing out the error.
Currently there is a "calc_face_normal" argument to mesh to bmesh
conversion, but vertex normals had always implicitly inherited whatever
dirty state the mesh input's vertex normals were in. Probably they were
most often assumed to not be dirty, but this was never really correct in
the general case.
Ever since the refactor to move vertex normals out of mesh vertices,
cfa53e0fbe, the copying logic has been explicit: copy the
normals when they are not dirty. But it turns out that more control is
needed, and sometimes normals should be calculated for the resulting
BMesh.
This commit adds an option to the conversion to calculate vertex
normals, true by default. In almost all places except the decimate
and edge split modifiers, I just copied the value of the
"calc_face_normals" argument.
Differential Revision: https://developer.blender.org/D14406
A mistake in the mesh normal refactor caused the wrong mesh to
be used when calculating normals with a shape key's deformation.
This commit fixes the normal calculation by using the correct mesh,
with just adjusted vertex positions, and calculating the results
directly into the result arrays when possible. This completely avoids
the need to make a local copy of the mesh, which makes sense,
since the only thing that changes is the vertex positions.
Differential Revision: https://developer.blender.org/D14317
For render image buffers to be acquired, a lock must be provided. Also
fixed wrong usage of release, it must always be called regardless if the
returned image buffer is NULL.
Vertices were not drawn properly as the logic for mapped mesh was used
in the BMesh case.
Edge display would ignore subdivided edges which would come from coarse
edges when setting display flags.
If the mouse is not hovering the window, there is no active region. This is a
valid state, but the UI-list filter operator didn't account for that case.
Currently, whenever any BMesh is converted to a Mesh (except for edit
mode switching), original index (`CD_ORIGINDEX`) layers are added.
This is incorrect, because many operations just convert some Mesh into
a BMesh and then back, but they shouldn't make any assumption about
where their input mesh came from. It might even come from a primitive
in geometry nodes, where there are no original indices at all.
Conceptually, mesh original indices should be filled by the modifier
stack when first creating the evaluated mesh. So that's where they're
moved in this patch. A separate function now fills the indices with their
default (0,1,2,3...) values. The way the mesh wrapper system defers
the BMesh to Mesh conversion makes this a bit less obvious though.
The old behavior is incorrect, but it's also slower, because three
arrays the size of the mesh's vertices, edges, and faces had to be
allocated and filled during the BMesh to Mesh conversion, which just
ends up putting more pressure on the cache. In the many cases where
original indices aren't used, I measured an **8% speedup** for the
conversion (from 76.5ms to 70.7ms).
Generally there is an assumption that BMesh is "original" and Mesh is
"evaluated". After this patch, that assumption isn't quite as strong,
but it still exists for two reasons. First, original indices are added
whenever converting a BMesh "wrapper" to a Mesh. Second, original
indices are not added to the BMesh at the beginning of evaluation,
which assumes that every BMesh in the viewport is original and doesn't
need the mapping.
Differential Revision: https://developer.blender.org/D14018
Caused by rBc0bd240ad0a1.
To avoid crash, make boolean value false if active object data is NULL.
Should be backported to 2.93 LTS and 3.1 corrective releases.
A 7 year old commit, 2ec00ea0c1, used incorrect indexing for
the optional array of precomputed poly normals. Apparently that code
path was never used, or this issue would have been discovered earlier.
Recent changes calculate normals on a temporary mesh and use those
for the "low-res" layer, meaning the precomputed path was always taken.
Since 3b6ee8cee7, a list of vertex groups cannot be retrieved
from curve objects for merging because curve objects do not support
vertex groups. Previously the empty list on the object was returned.
Only mesh objects are supported for the caps.
Old python exporter in 3.0 and earlier ordered faces by material,
but the new C++ exporter in 3.1+ did not, and was just writing them
in whatever is the order of the mesh data structure.
This mostly does not cause problems, except in some apps e.g.
Procreate -- for large enough meshes, this lack of
"order by material" (which ends up having more usemtl lines)
ends up creating more mesh subsets than necessary inside Procreate.
The change is not computationally heavy, e.g. exporting 6-level
subdivided Monkey mesh goes 1085ms -> 1105ms on my machine.
Reviewed By: @howardt
Differential Revision: https://developer.blender.org/D14368
Cherry-picked from: eb1755be35 + fab14f7854 + 8c072cdc93
The logic in the code was _completely different_ from the documentation
and what the python exporter in 3.0 did. The new code assumed that
"export material groups" meant "append material name to the object name",
and was only ever kicking in when the "export object groups" option was
also checked. But the proper behavior (as in 3.0 exporter & the online docs),
is to emit g objectname_materialname before each usemtl line. Which is something entirely else.
Cherry picked from b9123b806f (D14349) with minor conflict fixes.
Instead of scaling "the scene" (i.e. transform vertices by object matrix,
then multiply by scale factor), it was instead first applying the scale
factor in local space, and then transforming by the object matrix.
Cherry picked from 5bfdaaa800, original differential D14347.
The new 3.1+ OBJ exporter did not have correct logic when faced with
non-uniform & mirrored (negative on odd number of axes) object scale:
- Normals were not transformed correctly (should use inverse transpose of the matrix),
and were not normalized,
- Face order was not "flipped" when transform has negative scale on odd number of axes
(visible when using "face orientation" viewport overlay).
Cherry-picked from 8aa365745a, with minor conflict fixes.
Reviewed By: Howard Trickey
Differential Revision: https://developer.blender.org/D14343
Allow the user to set an anisotropic filtering setting below the implementation-defined value of `GL_MAX_TEXTURE_MAX_ANISOTROPY_EXT`.
This bug-fix is also needed for 2.93 LTS.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D14392
When using inverted filling and click inside a closed area and not outside as is expected, the algorithm to detect the contour to fill is unable to find the filling shape and try to fill outside of the valid index.
The infinite loop was adding more memory for each loop and the process continued while there was system resources and finally crashed the system.
As the tool in negative mode is designed to fill all areas when you click outside of any shape, now the algorithm check if the outline is not working as expected and cancels the filling process.
When the light direction is not pointing away from the geometric normal and
there is a shadow terminator offset, self intersection is supposed to occur.
Modified source Armature ID in the join operation was not properly
tagged as such for the depsgraph (and therefore memfile undo)..
Issue caused/revealed by rBe648e388874a.
Should be backported to 3.1 should we make a corrective release.
Caused by 0cb5eae9d0 which restored
support for 3D depth when selecting gizmos - making it difficult
to select single lines drawn in front of other gizmos.
Previously the first hit was always used.
Resolve by using a margin around arrow stems when selecting
which was already done for 2D arrows.
This fixes the crash by removing the `do_view3d_header_buttons` handler.
The code can work at a higher level here, using the operator for setting
the select mode, which makes this patch a cleanup as well.
The operator now has a description callback to add the custom
description used for the behavior in its invoke method.
Differential Revision: https://developer.blender.org/D13660
For now just assume that a node group without output sockets is
an output node. Ideally, we would use run-time information stored
on the node group itself to determine if the group contains a
top-level output node (e.g. Material Output). That can be
implemented separately.
In the larger scheme of things, top-level outputs within node
groups seem to break the node group abstraction and reusability
a bit.
Regression in 265d97556a.
Where iterating directly on a property group failed, e.g.:
`iter(group)`, tests missed this since only `group.keys()`
was checked.
When the geometry of the sculpt mesh was replaced when restoring from
a full undo step, the runtime data was not cleared (including any
normals, triangulation data, or any other cached derived data).
In the report, only the invalid normals were observed.
The fix is to simply clear these caches. Later they will be reallocated
and recalculated if necessary. Since the whole mesh replaced here
anyway, this should be a safe fix.
Differential Revision: https://developer.blender.org/D14282
Tangents are computed from UVs on the CPU side when using GPU subdivision
and require that the normals are available there as well (at least for smooth
shading, flat normals can be computed on the fly). This simply adds the missing
normals update call for the `MeshRenderData` setup for the subdivision case.
Differential Revision: https://developer.blender.org/D14278
Some drivers for legacy platforms seem to have issues with compute
shaders, as revealed by T94936. This disables compute shader for the
known drivers where this issue is present. It is not clear if the issue
is Windows only or not, so this disable them for all operating systems.
See T94936 for a list of configurations where the issue is reproducible
or not.
Differential Revision: https://developer.blender.org/D14264
Issue only happens in release builds on windows. That said it was an
actual error in the code. This class is compiled inline in release
builds. When updating multiple textures it would reuse the same memory
to collect the changes. When the previous loaded tilenumber was exactly the
same but from a different image the tile buffer wasn't loaded.
Reviewed By: sergey
Maniphest Tasks: T96213
Differential Revision: https://developer.blender.org/D14274
Issue was introduced after the python 3.10 switch
Explicit conversion to int will fix the issue.
Same issue is likely to happen with `MovieTrackingSettings.default_search_size`
So I did the same change over there.
Differential Revision: https://developer.blender.org/D14273
This fixes the second part of T93573 that 8506f3d9fe didn't
properly address. Specifically, outlines of instances still had the
selected color in edit mode in wireframe view. This change is the
same as that commit, just in a different place.
Differential Revision: https://developer.blender.org/D14229
Fix crash when creating a pose asset for which the file list entry in
the asset browser is scrolled off-screen. Because of the
off-screen-ness, it wasn't loaded into memory, which eventually caused
an unexpected NULL pointer.
The solution was to use a different function (`filelist_file_find_id`)
that can reliably find the file list entry, after which the cache entry
can be created.
Reviewed by: Severin
Differential Revision: https://developer.blender.org/D14265
When drawing the driver editor, only skip drawing the "scrubbing area"
and not the Y-axis values or the scroll bars.
The issue was introduced in rBb3431a88465db2433b46e1f6426c801125d0047d
to avoid drawing the playhead in the Driver Editor but also prevented
the text on the y axis from being drawn.
Reviewed by: Severin, sybren
Maniphest Tasks: T95531
Differential Revision: https://developer.blender.org/D14022
Using press to activate the Tweak tool doesn't work well when used a
fallback tool as the drag event is often used by the current tool -
making it impossible not to select when dragging (unless the fallback
tool is disabled entirely).
Resolve this by using CLICK events when the Tweak tool is used as a
fallback.
Even though this avoids the crash, check for null-pointer de-reference
since changes to the key-map shouldn't cause operators to crash.
Note that the ability for operators to access a gizmo before it's fully
initialized is a more general problem that should be addressed, but out
of scope for a bug-fix.
Reviewed By: zeddb, JulienKaspar, Severin
Maniphest Tasks: T95591
Ref D14231
Regression in d961adb866,
it's important that for the Mesh used for undo storage matches
the shape-key instead of using the coordinates of the Basis key.
Prior to bfdbc78466 a different method of
restoring the basis shape-key coordinates was used (restoring from the
input `Mesh.mvert` array). When undo wrote the edit-mesh into the mesh
this was always NULL so the basis shape keys coordinates were never
used.
Now a parameter has been added so undo can use the active shape for the
meshes vertex coordinates.
Reviewed By: sergey
Maniphest Tasks: T96205
Ref D14258
Undo would invalidate image owned GPU textures only. Textures
that are owned by the editor were not refreshed. This patch would
invalidate all the GPU textures by marking the whole image dirty.
This can be improved later as we could add partial updates of GPU
textures.
Reviewed By: mont29
Maniphest Tasks: T96163
Differential Revision: https://developer.blender.org/D14259
Caused by oversight in 2bcf93bbbe. Operator returns `OPERATOR_CANCELLED`
when it should return `OPERATOR_FINISHED`.
Reviewed By: mano-wii, campbellbarton
Differential Revision: https://developer.blender.org/D14243
When exiting edit-mode set the vertex coordinates to the basis-shape when editing non-basis keys.
Regression in bfdbc78466.
Reviewed By: sergey
Ref D14234
This commit removes the outline from instances generated from an object
when in edit mode. This takes the change in aa13c4b386 a bit further,
with the idea that instance outlines are more like regular outlines.
Because evaluated object data that doesn't match the original object
type is treated as an instance internally, this fixes the way evaluated
meshes for curves objects have an outline, for example.
See the differential revision for a visual comparison.
Differential Revision: https://developer.blender.org/D14226
There are two issues revealed in the bug report:
- the GPU subdivision does not support meshes with only loose geometry
- the loose geometry is not subdivided
For the first case, checks are added to ensure we still fill the
buffers with loose geometry even if no polygons are present.
For the second case, this adds
`BKE_subdiv_mesh_interpolate_position_on_edge` which encapsulates the
loose vertex interpolation mechanism previously found in
`subdiv_mesh_vertex_of_loose_edge`.
The subdivided loose geometry is stored in a new specific data structure
`DRWSubdivLooseGeom` so as to not pollute `MeshExtractLooseGeom`. These
structures store the corresponding coarse element data, which will be
used for filling GPU buffers appropriately.
Differential Revision: https://developer.blender.org/D14171
previously_visible_components_mask was not preserved for Image ID nodes, which
meant it was always detected as newly visible and tagged to be updated, which
in turn caused the geometry nodes using it to be always updated also.
Reviewed By: sergey, JacquesLucke
Maniphest Tasks: T94609
Differential Revision: https://developer.blender.org/D14217
A simple case of missing the tangent VBO. The tangents are computed from
the coarse mesh, and interpolated on the GPU for the final mesh. Code for
initializing the tangents, and the vertex format for the VBO was
factored out of the coarse extraction routine, to be shared with the
subdivision routine.
Mousemove events are sent to windows.
In Windows OS, almost all mousemove events are sent to the window whose
mouse cursor is over.
On MacOS, the window with mousemove events is always the active window.
It doesn't matter if the mouse cursor is inside or outside the window.
So, in order for non-active windows to also have events,
`WM_window_find_under_cursor` is called to find those windows and send
the same events.
The problem is that to find the window, `WM_window_find_under_cursor`
only has the mouse coordinates available, it doesn't differentiate
which monitor these coordinates came from.
So the mouse on one monitor may incorrectly send events to a window on
another monitor.
The solution used is to use a native API on Mac to detect the window
under the cursor.
For Windows and Linux nothing has changed.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D14197
This patch hides the MetalRT checkbox for AMD GPUs, pending fixes for MetalRT argument encoding on AMD.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D14175
The issue was uncovered by the 0f89bcdbeb, but the root cause goes
into a much earlier design violation happened in the code: the modifier
evaluation function is modifying input mesh, which is not something
what is ever expected.
Bring code closer to the older state where such modification is only
done for the object in edit mode.
---
From own tests works seems to work fine, but extra eyes and testing
is needed.
Differential Revision: https://developer.blender.org/D14191
The image engine is depth aware when using tile drawing the depth is
only updated for the central image what lead to showing the background
on top of other areas.
Also makes sure that switching the tile drawing would lead to an update
of the texture slots.
When dimension of images aren't a multifold of 256 parts of the gpu
textures are not updated. This patch will calculate the correct part of
the image that needs to be reuploaded.
Internally the update tiles are 256x256. Due to some miscalculations
tiles were not generated correctly if the dimension of the image wasn't
a multifold of 256.
Previously we used to cache a float image representation of the image in
rect_float. This adds some incorrect behavior as many areas only expect
one of these buffers to be used.
This patch stores float buffers inside the image engine. This is done per
instance. In the future we should consider making a global cache.
New code from the vertex normal refactor cfa53e0fbe combined with older code
from 592759e3d6 that disabled instancing for custom normals and autosmooth
meant that instancing was always disabled.
However we do not need to disable instancing for custom normals and autosmooth
at all, this can be shared between instances just fine.
Caused by 0f89bcdbeb and was not fully addressed by 6f9828289f:
tagging an ID with flag 0 is to be seen as an explicit tag for copy
on write.
Would be nice to either consolidate code paths of flag 0 and explicit
component tag, or get rid of tagging with 0 flag, but that is above of
what we can do for the upcoming release.
When using ancored stroked the diameter of the stroke can be 0 what
leads to a division by zero that on certain platforms wrap to a large
negative number that cannot be looked up. This fix will clamp the size
of the brush to 1.
This fixes T93051, T76405 and maybe others.
Characters like '²', '<' are not recognized in Blender's shortcut keys.
And sometimes simple buttons like {key .} and {key /} on the Windows
keyboard, although the symbol is "known", Blender also doesn't
detect for shortcuts.
For Windows, some of the symbols represented by `VK_OEM_[1-8]` values,
depending on the language, are not mapped by Blender.
On Mac there is a fallback reading the "actual character value of the
'remappable' keys". But sometimes the character is not mapped either.
On Windows, the solution now mimics the Mac and tries to read the button's
character as a fallback.
For unmapped characters ('²', '<', '\''), now another value is chosen as a
substitute.
More "substitutes" may be added over time.
Differential Revision: https://developer.blender.org/D14149
In some cases, the normal edit modifier calculated the normals on one
mesh with the "ensure" functions, then copied the mesh and retrieved
the layers "for write" on the copy. Since 59343ee162, normal
layers are never copied, and normals are allocated with malloc instead
of calloc, so the mutable memory was uninitialized.
Fix by calculating normals on the correct mesh, and also add a warning
to the "for write" functions in the header.
The check to see if newly requested attributes are not already in the
cache was not taking into account the possibility that we do not have
new requested attributes (`num_requests == 0`). In this case, if
`attr_used` already had attributes, but `attr_requested` is empty, we
would consider the cache as dirty, and needlessly rebuild the attribute
VBOs.
These features are complicated to support on GPU and hardly compatible
with subdivision in the first place. In the future, with T68891 and
T68893, subdivision and custom smooth shading will be separate workflows.
For now, and to better prepare for this future (although long term
plan), we should discourage workflows mixing subdivision and custom
smooth normals, and as such, this disables GPU subdivision when
autosmoothing or custom split normals are used.
This also adds a message in the modifier's UI to indicate that GPU
subdivision will be disabled if autosmooth or custom split normals are
used on the mesh.
Differential Revision: https://developer.blender.org/D14194
Reuse the same vertex normals calculation as for the GPU code, by
weighing each vertex normals by the angle of the edges incident to the
vertex on the face.
Additionally, remove limit normals, as the CPU code does not use them
either, and would also cause different shading issues when limit surface
is used.
Fixes T95242: shade smooth artifacts with edge crease and limit surface
Fixes T94919: subdivision, different shading between CPU and GPU
This operation can only be applied on one ID at a time, so only apply it
to the active Outliner item, and not all the selected ones.
Also renamed `Make Library Override` menu entry to `Make Library Override
Single` to emphasis this is not the 'default expected' option for the
user.
Trust user count to actually delete or not the dragged ID when current
dragging is cancelled, since it may be already used by others.
NOTE: This is more a band-aid fix than anything else, cancelling drag
has a lot of other issues here (like never deleting any indirectly
linked/appended data, etc.). It needs a proper rethink in general.
To keep consistency with the new contract option, the dilate now expand the shape beyond the internal closed area.
Note: This was committed only in master (3.2) by error.
This is requested by artist for some animation styles where is necessary to fill the area, but create a gap between fill and stroke.
Also some code cleanup and fix a bug in dilate for top area.
Reviewed By: pepeland, mendio
Differential Revision: https://developer.blender.org/D14082
Note: This was committed only in master (3.2) by error.
Without ray offsets intersections at neigbhoring triangles are found, as
the ray start is exactly at the vertex. There was a small offset towards
the center of the triangle, but not enough.
Now this offset computation is moved into Cycles and modified for better
results. It's still not perfect though like any offset approach, especially
with long thin triangles.
Additionaly, this uses the shadow terminate offset for AO rays now, which
helps remove some pre-existing artifacts.
Also fix a couple other places where normals layers weren't properly
tagged dirty or reallocated when the mesh changes.
Caused by cfa53e0fbe. When the size of a mesh changes,
the normal layers need to be reallocated. There were a couple of places
that cleared other runtime data with `BKE_mesh_runtime_clear_geometry`
but didn't deal with normals properly. Clearing the runtime "geometry"
is different from clearing the normals, because sometimes the size of
the normal layers doesn't have to change, in which case simply tagging
them dirty is fine.
When X-ray mode is active the selection is done using the mesh data to
select what is closest to the cursor. When GPU subdivision is active with
the "show on cage" modifier option, this fails as the mesh used for selection
is the unsubdivided one.
This creates a subdivision wrapper before running the selection routines to
ensure that subdivision is available on the CPU side as well.
Differential Revision: https://developer.blender.org/D14188
This was a double free error which happened because `BM_mesh_bm_from_me`
was taking ownership of arrays that were still owned by the Mesh. Note that
this only happens when the mesh is empty but some custom data layers still
have a non-null data pointer. While usually the data pointer should be null in
this case for performance reasons, other functions should still be able to
handle this situation.
Differential Revision: https://developer.blender.org/D14181
When exporting generated coordinates, the subdivision export code was
using the schema for the non-subdivision case, which is invalid as
non-initialized. This typo existed since the initial commit for the
feature (rBf9567f6c63e75feaf701fa7b78669b9a436f13dd).
The scale-to-fit option did nothing for single words when
the text box had a height. This happened because it was expected that
text would be wrapped however single words never wrap.
Now the same behavior for zero-height text boxes is used when text
can't be wrapped onto multiple lines.
0fd72a98ac called functions to set bezier handle positions
that used uninitialized memory. The fix is to define the handle positions
explicitly, like before.
Drag Action was constantly resetting itself to "move".
Solve this by storing the tool settings per tool and no longer clear
gizmo properties when activating a new tool.
Currently, when normals are calculated for a const mesh, a custom data
layer might be added if it doesn't already exist. Adding a custom data
layer to a mesh is not thread-safe, so this can be a problem in some
situations.
This commit moves derived mesh normals for polygons and
vertices out of `CustomData` to `Mesh_Runtime`. Most of the
hard work for this was already done by rBcfa53e0fbeed7178.
Some changes to logic elsewhere are necessary/helpful:
- No need to call both `BKE_mesh_runtime_clear_cache` and
`BKE_mesh_normals_tag_dirty`, since the former also does the latter.
- Cleanup/simplify mesh conversion and copying since normals are
handled with other runtime data.
Storing these normals like other runtime data clarifies their status
as derived data, meaning custom data moves more towards storing
original/editable data. This means normals won't automatically benefit
from the planned copy-on-write refactor (T95845), so it will have to be
added manually like for the other runtime data.
Differential Revision: https://developer.blender.org/D14154
Currently the RNA functions to add mesh elements like vertices
don't clear the runtime cache of things like triangulation, BVH
trees, etc. This is important, since they might be accessed with
incorrect sizes. This is split from a fix for T95839.
Atomic operations performed by the C++ standard library might require
libatomic on platforms which do not have hardware support for those
operations.
This change makes it that such configurations are automatically detected
and -latomic is added when needed.
Differential Revision: https://developer.blender.org/D14106
There was accidentally some displacement related code running even when not
using displacement.
Differential Revision: https://developer.blender.org/D14169
Previously, objects and geometries were mapped between frames
using different hash tables in a way that is incompatible with
geometry instances. That is because the geometry mapping happened
without looking at the `persistent_id` of instances, which is not possible
anymore. Now, there is just one mapping that identifies the same
object at multiple points in time.
There are also two new caches for duplicated vbos and textures used for
motion blur. This data has to be duplicated, otherwise it would be freed
when another time step is evaluated. This caching existed before, but is
now a bit more explicit and works for geometry instances as well.
Differential Revision: https://developer.blender.org/D13497
Reset Defaults left the undo stack in an invalid state,
with the active undo step left at the previous state then it should
have been.
Now the buttons own undo logic is used to perform undo pushes.
- No need for `normal_tx` array if we normalize the planes in `plane_tx`.
- No need to calculate the distance squared to a plane (with `dist_signed_squared_to_plane_v3`) if the plane is normalized. `plane_point_side_v3` gets the real distance, accurately, efficiently and also signed.
So normalize the planes of the member `CameraViewFrameData::plane_tx`.
This is a regression partially introduced in rB0a6f428be7f0.
Bones being transformed into edit mode were snapping to themselves.
And the bones of the pose mode weren't even snapping.
(Curious that this was not reported).
Since Python 3.10 is now supported on all platform,
bump the minimum version to reduce the number of Python versions that
need to be supported simultaneously.
Reviewed By: LazyDodo, sybren, mont29, brecht
Ref D13943
This is an alternate fix for T35170 since it caused T44415.
Having the undo system manipulate the key-block coordinates is error
prone as (in the case of T44415) there are situations when it's
important to apply the difference with the original shape key.
This reverts dab0bd9de6, and instead
avoids the problem by not using the data in `Mesh.key` as a reference
for updating shape-keys when exiting edit-mode.
The assumption that the `Mesh.key` in edit-mode won't be modified
until leaving edit-mode isn't always true. Leading to synchronization
errors. (details noted in code-comments).
Resolve this by using shape-key data stored in the BMesh.
Resolving both T35170 & T44415.
Details:
- Remove use of the original vertices when exiting edit mode.
- Remove use of the original shape-key coordinates when exiting
edit-mode (except as a last resort).
- Move shape-key synchronization into a separate function:
`bm_to_mesh_key`.
- Split the synchronization loop into two branches,
depending on the existence of BMesh shape-key coordinates.
- Always write shape-key values back to the BMesh CD_SHAPEKEY layers.
This was only done in some cases but is now necessary for all
shape-keys as these are used to calculate offsets where the `Mesh.key`
was previously used.
- Report a warning when the shape-key layer isn't found as this uses an
imperfect method of restoring coordinates which should only be used as
a last resort.
Reviewed By: mont29
Ref D14127
The problem was when the Object Offset was enabled because the Constant Offset flag was not checked and the offset always was added to the transformation matrix.
Limit the min and max of the IDProperty for the node group input
from 0 to infinity, and the soft min and max between 0 and 1.
Thanks to @PratikPB2123 for investigation.
Instead of accessing the `CD_NORMAL` layer directly,
use the proper API for accessing mesh normals. Even if the
layer exists, the values might be incorrect due to a deformation.
Related to ef0e21f0ae, 969c4a45ce, and T95839.
The flags overlapped ever since normalize was added, so this requires
versioning to copy the flag value.
Differential Revision: https://developer.blender.org/D14165
The code was using the same flag value for different modifiers,
resulting in matching the toggle to random overlapping flags.
Differential Revision: https://developer.blender.org/D14165
When RMB-select uses "Select Tweak" as a fallback tool,
ignore all bindings mapped to the Control key as these are
used for path selection.
This was fixed in 2a2d873124
however that caused shift-select to fail (T93100).
The node animation versioning code passes `nullptr` to the `oldName` and
`newName` parameters, but those weren't `NULL`-safe. I added an extra
check for this.
No functional changes, just a crash fix.
Althought the float buffers are only used as cache, current code paths
don't look at the flags to identify which kind of image it is. Actual
fix would be to check flags, but that wouldn't be something to add one
week before release.
This commit fixes it by removing the buffers after use in the image
engine.
Bug was introduced in D12167.
Reading input size from an input socket is not possible in tiled compositor before execution is initialized. A similar change was done for the base class, see BlurBaseOperation::init_data().
Reviewed by: Jeroen Bakker
Differential Revision: https://developer.blender.org/D14067
This commit should suffice to make the shader API agnostic now (given that
all users of it use the GPU API).
This makes the shaders not trigger a false positive error anymore since
the binding slots are now garanteed by the backend and not changed at
after compilation.
This also bundles all uniforms into UBOs. Making them extendable without
limitations of push constants. The generated uniforms from OCIO are not
densely packed in the UBO to avoid complexity. Another approach would be to
use GPU_uniformbuf_create_from_list but this requires converting uniforms
to GPUInputs which is too complex for what it is.
Reviewed by: brecht, jbakker
Differential Revision: https://developer.blender.org/D14123
This removes manual handling of normals that was hard-coded
to false in the one place the function was called. This change
will help to make a fix to T95839 simpler.
It's better not to expose the details of where the dirty flags are
stored to every place that wants to know if the normals are dirty.
Some of these places are relics from before vertex normals were
computed lazily anyway, so this is more of an incrememtal cleanup.
This will make part of the fix for T95839 simpler.
Make relation match material and world nodes. Does not address the reported
issue regarding muted nodes, but another missing update found investigating.
This was an old issue, but recent image partial update changes made this more
likely to happen in some cases. Now ensure that whenever the rendered scene
switches the image is updated.
The problem was that the code for sorting polygons around a vertex
assumed that it was a manifold or boundary vertex. However in some cases
the vertex could still be nonmanifold causing the crash. The cases where
the sorting fails are now detected and these vertices are then marked as
nonmanifold.
Differential Revision: https://developer.blender.org/D14065
The "Fill Caps" option on the Curve to Mesh node introduced in
rBbc2f4dd8b408ee makes it possible to fill the open ends of the sweep
to create a manifold mesh.
This patch fixes an edge case, where caps were created even when the
rail curve (the curve used in the "Curve" input socket) was cyclic
making the resulting mesh non-manifold.
Differential Revision: https://developer.blender.org/D14124
In ffmpeg 5.0, several variables were made const to try to prevent bad API usage.
Removed some dead code that wasn't used anymore as well.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D14063
Fix boundary error in `BLI_str_unescape_ex`. The `dst_maxncpy` parameter
indicates the maximum buffer size, not the maximum number of characters.
As these are strings, the loop has to stop one byte early to allow space
for the trailing zero byte.
Thanks @mano-wii for the patch!
When new display driver is given to the PathTrace ensure that there are
no GPU resources used from it by the work. This solves graphics interop
descriptors leak.
This aqlso fixes Invalid graphics context in cuGraphicsUnregisterResource
error when doing final render on the display GPU.
Fixes T95837: Regression: GPU memory accumulation in Cycles render
Fixes T95733: Cycles Cuda/Optix error message with multi GPU devices. (Invalid graphics context in cuGraphicsUnregisterResource)
Fixes T95651: GPU error (Invalid graphics context in cuGraphicsUnregisterResource)
Fixes T95631: VRAM is not being freed when rendering (Invalid graphics context in cuGraphicsUnregisterResource)
Fixes T89747: Cycles Render - Textures Disappear then Crashes the Render
Maniphest Tasks: T95837, T95733, T95651, T95631, T89747
Differential Revision: https://developer.blender.org/D14146
Add check for `NULL` `from` pointer to `BLO_main_validate_shapekeys`,
and delete these shapekeys, as they are fully invalid and impossible to
recover.
Found in a studio production file (`animation
test/snow_parkour/shots/0040/0040.lighting.blend`, svn rev `1111`).
Would be nice to know how this was generated too...
Previous implementation had a copy of the image user, which doesn't
contain all the data to identify changes. This patch introduces a new
struct to store the data and can be extended with other data as well
(color spaces, alpha settings).
For the attribute search button, the tooltip was missing
if the input socket type has attribute toggle activated.
Differential Revision: https://developer.blender.org/D14142
This affected loading of EXR files with set to Linear ACES colorspace, as
well as the sky texture for in some custom OpenColorIO configurations.
Use the builtin OpenColorIO transform from ACES AP0 to XYZ D65 to fix this.
I noticed that there were a few variables that should not be visible per default.
It seems to me to simply be an oversight, so I went ahead and cleaned them up.
Reviewed By: Sybren, Ray molenkamp
Differential Revision: http://developer.blender.org/D14132
This is a bug on the Blender side, where the depsgraph does not have proper
relations for text object duplis and fails to include the required materials
in the dependency graph. But at least Cycles should not crash.
FindOpenImageIO was updated to link to separate OpenImageIO_Util for new
versions, where it is required. For older versions, we can not link to it
because there will be duplicated symbols.
Ref D14128
FindOpenEXR was updated to find new lib names and separate Imath. It's all
added to the list of OpenEXR include dirs and libs.
This keeps it compatible with both version 2 and 3 for now, and doesn't
require changes outside the find module.
Ref D14128
Coarse meshes with high polycount would show as corrupted when GPU
subdivision is used with AMD cards This was caused by the OpenSubdiv
library not taking `GL_MAX_COMPUTE_WORK_GROUP_COUNT` into account when
dispatching computes. AMD drivers tend to set the limit lower than
NVidia ones (2^16 for the former, and 2^32 for the latter, at least
on my machine).
This moves the `GLComputeEvaluator` from the OpenSubdiv library into
`intern/opensubdiv` and modifies it to compute a dispatch size in a
similar way as for the draw code: we split the dispatch size into a 2
dimensional value based on `GL_MAX_COMPUTE_WORK_GROUP_COUNT` and
manually compute an index in the shader.
We could have patched the OpenSubdiv library and sent the fix upstream
(which can still be done), however, moving it to our side allows us to
better control the `GLComputeEvaluator` and in the future remove some
redundant work that it does compared to Blender (see T94644) and
probably prepare the ground for Vulkan support. As a matter of fact,
this patch also removes the OpenGL initialization that OpenSubdiv would
do here. This removal is not related to the bug fix, but necessary to not
have to copy more files/code over.
Differential Revision: https://developer.blender.org/D14131
This fixes VR pink screen issues when using the DirectX backend, caused
by `wglDXRegisterObjectNV()` failing to register the shared
OpenGL-DirectX render buffer. The issue is mainly present on AMD
graphics, however, there have been reports on NVIDIA as well.
A limited workaround for the SteamVR runtime (AMD only) was provided
in rB82ab2c167844, however this patch provides a more complete solution
that should apply to all OpenXR runtimes. For example, with this patch,
the Windows Mixed Reality runtime that exclusively uses DirectX can now
be used with AMD graphics cards.
Implementation-wise, a `GL_TEXTURE_2D` render target is used as a
fallback for the shared OpenGL-DirectX resource in the case that
registering a render buffer (`GL_RENDERBUFFER`) fails. While using a
texture render target may be less optimal than a render buffer, it
enables proper display in VR using the OpenGL/DirectX interop (tested
on AMD Vega 64).
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D14100
StringGrid has been deprecated in openvdb 9.0.0 and will be removed soon
Reviewed By: Brecht
Differential Revision: http://developer.blender.org/D14133
GLUT does not support offscreen contexts, which is required for the new
display driver. So we use SDL instead. Note that this requires using a
system SDL package, the Blender precompiled SDL does not include the video
subsystem.
There is currently no text display support, instead info is printed to
the terminal. This would require adding an embedded font and GLSL shaders,
or using GUI library.
Another improvement to be made is supporting OpenColorIO display transforms,
right now we assume Rec.709 scene linear and display.
All OpenGL, GLEW and SDL code was move out of core cycles and into
app/opengl. This serves as a template for apps that want to integrate
Cycles interactive rendering, with a simple OpenGLDisplayDriver example.
In general this would be adapted to the graphics API and color management
used by the app.
Ref T91846
Due to recent changes there have been reports of incorrect loading of
GPU textures. This fix reverts a part of {D13238} that might be the
source of the issue.
This does not happen with **any** image, but with images that have ID
properties.
ID properties are used to store view projection matrices (e.g. for
reprojection with `Image from View` or `Quick Edit` -- these are the
ones we are interested in), but of course they can be used for anything
else, too. The images in the file from the report have ID properties from
an Addon for example.
So the crash can reliably be reproduced with **any** image doing the
following:
```
bpy.data.images['myImage']['myIDprop'] = "foo"
```
This would lead code in `texture_paint_camera_project_exec` to think the
needed `view_data` is on the image (but in reality it was just some
other IDprop).
Solution is simple: just check `view_data` is really valid after getting
it from the IDprops.
Maniphest Tasks: T95787
Differential Revision: https://developer.blender.org/D14116
Although rB56407432a6a did fix missing subdivision in some cases, in
other cases it did not return the mesh wrapper (like when using
autosmooth, which requires a copy of the mesh), so the non-subdivided
mesh was still returned.
Not all coarse vertices were used to compute the center value (off by
one), and the interpolation for the current would always start at the
base corner for the base face instead of the base corner for the current
patch.
Set "view2d_edge_pan" to true for the NODE_OT_translate_attach operator,
which is used by the duplication operator. This is done in the keymap so
that it's not hard-coded.
Differential Revision: https://developer.blender.org/D13934
The root issue was caused by a mistake in modifier copy data which was
wrongly re-generating source modifier data identifier.
The c8cca88851 simply exposed a bug in code which always was there
since the modifiers session UUID was introduced.
Shows an importance of const qualifier :)
Since now we delegate the evaluation of the last subsurf modifier in the stack
to the draw code, Cycles does not get a subdivided mesh anymore. This is because
the subdivision wrapper for generating a CPU side subdivision is never created
as it is only ever created via `BKE_object_get_evaluated_mesh` which Cycles does
not call (rather, it accesses the Mesh either via `object.data()`, or via
`object.to_mesh()`).
This ensures that a subdivision wrapper is created when accessing the object data
or converting an Object to a Mesh via the RNA/Python API.
Reviewed by: brecht
Differential Revision: https://developer.blender.org/D14048
The crash is caused as we did not check that the RNA pointer is null
before trying to use it. This moves the existing checks from the
modifier panels into the template functions so the logic is a bit
centralized.
The issue has two causes: on one hand origin indices were not handled
properly, on the other hand the extraction type (Mesh, BMesh, or mapped)
was not detected correctly.
For the second case reuse the MeshRenderData creation from the coarse
code path so that we make the same decisions. Loose geometry extraction
had to be updated to properly handle the BMesh cases.
For the origin indices, in some cases (for edges and faces), the arrays
used by the subdivision code already have the origin indices baked into
them, so mapping them a second time through the origin index layer is
wrong, and could cause out of bounds accesses.
For vertices especially, we would use two arrays: one for mapping
subdivision vertices to coarse vertices, and another one to map coarse
vertices to subdivision loops used for the selection index buffer. The
second one is now removed (which saves a bit of memory) as it is did not
have the proper data setup for use with the origin indices and we can
easily compute it using the first array anyway.
Fix segfault when calling `some_id.id_properties_ui("propname").update()`,
i.e. call the `update()` function without any keyword arguments. In such
a case, Python passes `kwargs = NULL`, but `PyDict_Contains()` is not
`NULL`-safe.
The Viewer marked the gpu texture to be out of date. But it should have used
the mark_full_update as the gpu textures
are only used by the render/draw engines.
The image/node editor uses the image engine that have its own GPU textures.
Currently one a single texture slot is used to update the screen.
Current design is implemented to use multiple textures.
for now limit the number of texture slots to 1.
This node is a bit of a weird case, because it uses the value stored in an
output socket as an input. So when we want to determine if the Dot
changed, we also have to check if the Normal output changed.
A cleaner solution would be to refactor this by either storing the normal
on the node directly (instead of in an output socket), or by exposing it
by a separate input. This refactor should be done separately though.
The animation playback did not take into account individual stereoscopic views.
This patch fixes this by playing back the active view render.
Reviewed By: campbellbarton
Maniphest Tasks: T91423
Differential Revision: https://developer.blender.org/D14070
Workaround for a compilation issue preventing kernels compiling for AMD GPUs: Avoid problematic use of templates on Metal by making `gpu_parallel_active_index_array` a wrapper macro, and moving `blocksize` to be a macro parameter.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D14081
* Apple Silicon support enabled on macOS 12.2+
* AMD support enabled on macOS 12.3+
This patch also fixes a device enumeration crash on certain AMD configs which
was caused by over-release of MTLDevice objects.
Differential Revision: https://developer.blender.org/D14090
The rbit instruction is only available starting with ARMv6T2 and
the register prefix is different from what AARCH64 uses.
Separate the 32 and 64 bit ARM branches, add missing ISA checks.
Made sure the code works as intended on macMini with Apple silicon,
and on Raspberry Pi 4 B running 32bit Raspbian OS.
Differential Revision: https://developer.blender.org/D14056
Instead of creating and destroying threads when starting and stopping renders,
keep a single thread alive for the duration of the session. This makes it so all
display driver OpenGL resource allocation and destruction can happen in the same
thread.
This was implemented as part of trying to solve another bug, but it did not
help. Still I prefer this behavior, to eliminate potential future issues wit
graphics drivers or with future Cycles display driver implementations.
Differential Revision: https://developer.blender.org/D14086
For reasons unclear, destroying and then recreating a vertex buffer in the
render OpenGL context is affecting the immediate mode vertex buffer in the
draw manager OpenGL context.
Instead just create a single vertex buffer and use it for the lifetime of
the render OpenGL context. There's not really any need to have a separate
one per tile as far as I can tell.
Differential Revision: https://developer.blender.org/D14084
Due to the freeing and re-creation of textures performed when binding
offscreen viewports, VR viewport textures would be needlessly
re-created every drawing iteration, leading to a negative impact on VR
frame rate.
This was brought to light by 6738ecb64e, which introduced an
additional texture clear operation on initialization and was
prohibitively costly on some systems when performed every frame.
Now, the textures for VR viewports will not be always re-created
during offscreen binding, but only when necessary using a pre-drawing
step (`wm_xr_session_surface_offscreen_ensure()`).
Reviewed By: jbakker, fclem
Differential Revision: https://developer.blender.org/D14059
When using a RGBA16 (`GL_RGBA16`, `DXGI_FORMAT_R16G16B16A16_UNORM`)
swapchain format with Quest 2, no image is presented to the headset.
This can occur when using the SteamVR runtime with an AMD graphics card
(ex. T95374).
Workaround is to move this format after the Quest 2-compatible RGBA16F
formats in the candidates list so that the RGBA16F formats are chosen
instead.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D14024
Crash was caused since the function pointers
`s_xrGetOpenGLGraphicsRequirementsKHR_fn`/
`s_xrGetD3D11GraphicsRequirementsKHR_fn` were static and were not
updated with the correct proc address after being set the first time.
As stated in the OpenXR spec: "function pointers returned by
xrGetInstanceProcAddr using one XrInstance may not be valid when used
with objects related to a different XrInstance".
Although it would seem reasonable that the proc address would not
change if the instance was the same (hence the `static XrInstance s_instance;`),
in testing, repeated calls to `xrGetInstanceProcAddress()`
with the same instance still can result in changes (at least for the
SteamVR runtime) so the workaround is to simply set the function pointers
every time, essentially trivializing their `static` designations.
Reviewed By: Severin
Maniphest Tasks: T94268
Differential Revision: https://developer.blender.org/D14023
For the majority of node groups created in Blender 3.0 the behavior does not change.
So far we only found a single file where this setting has an effect.
Differential Revision: https://developer.blender.org/D14078
Complex Solidify creates edge bevel weights on the rim if the
according vertex has some vertex bevel weight. If there are no
edge bevel weights, they were left disabled even if vertex bevel
weights are used.
Some curve objects don't have an evaluated mesh at all, but line art
currently assumes that all curve objects have one before converting
it to a mesh internally. Fix this by checking if the curve object has an
evaluated mesh before skipping it.
The remaining problem is that evalauted from non-mesh objects or
evaluated curves from non-curve objects, etc. will be ignored if
"Allow Duplicates" is off. That's a different problem though.
Differential Revision: https://developer.blender.org/D14036
For curve-heavy scenes, memory consumption regressed when we switched from MetalRT to bvh2. Allow users to opt in to MetalRT to workaround this.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D14071
Disable binary archives on Apple Silicon (issue stems from instancing multiple PSOs from the same binary archive). Pipeline creation still filters through the OS shader cache, mitigating any impact on setup times after the initial render.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D14072
The main issue is that the image and image user is not updated correctly
in `rna_ImageUser_update`. `BKE_image_user_frame_calc` does not set the
correct frame, because the image is null. Also `IMA_GPU_REFRESH` is not
set for the same reason.
When gpu materials are first created, it is expected that the frame is set
correctly, and the flag is set if necessary. Therefore, somewhere during
depsgraph evaluation, those have to be updated. The depsgraph node
to do the update existed already. Now there is a new relation so that it is
executed when the node tree changed, not only when the frame changed.
This is partially caused by a stupid mistake in cfa53e0fbe
where I missed initializing the `vert_normals` pointer in
`MResolvePixelData`. It's also caused by questionable assumptions
from DerivedMesh code that vertex normals would be valid.
The fix used here is to create a temporary mesh with the data necessary
to compute vertex normals, and ensure them here. This is used because
normal calculation is only implemented for `Mesh` and edit mesh, not
`DerivedMesh`. While this might not be great for performance, it's
potentially aligned with future refactoring of this code to remove
`DerivedMesh` completely. Since this is one of the last places the data
structure is used, that would be a great improvement.
Differential Revision: https://developer.blender.org/D13960
The crash was happening when the mesh had loose edges.
Loose edges are not part of OpenSubdiv topology and hence should not be
communicated to the refiner. Pass ta boolean flag indicating whether an
edge is loose or not in the mesh foreach routines, which seems to be
the easiest way.
There are two things achieved by this change:
- No possible downcast of size_t to int when calculating motion steps.
- Disambiguate call to `min()` which was for some reason considered
ambiguous on 32bit platforms `min(int, unsigned int)`.
- Do the same for the `max()` call to keep them symmetrical.
On an implementation side the `min()` is defined for a fixed width
integer type to disambiguate uint from size_t on 32bit platforms,
and yet be able to use it for 32bit operands on 64bit platforms without
upcast.
This ended up in a bit bigger change as the conditional compile-in of
functions is easiest if the functions is templated. Making the functions
templated required to remove the other source of ambiguity which is
`algorithm.h` which was pulling min/max from std.
Now it is the `math.h` which is the source of truth for min/max.
It was only one place which was relying on `algorithm.h` for these
functions, hence the choice of `math.h` as the safest and least
intrusive.
Fixes 32bit platforms (such as i386) in Debian package build system.
Differential Revision: https://developer.blender.org/D14062
From a strict language point of view the code required a braces around
`trgba` initialization. But it is easier to rely on the fact that fields
which are not specified are zero-initialized.
Under some circumstances, simply adding a curve object and going
to edit mode would cause a crash. This is because the evaluated
`CurveEval` was accessed but also freed by the dependency graph.
The fix reverts the part of b76918717d that uses the
`CurveEval` for the curve object bounds. While this isn't ideal,
it was the previous behavior, and some unexpected behavior
with object bounds is much better than a crash. Plus, given the plans
of using the new "Curves" data-block for evaluated curves, this
situation will change relatively soon anyway.
There are two things achieved by this change:
- No possible downcast of size_t to int when calculating motion steps.
- Disambiguate call to min() which was for some reason considered
ambiguous on 32bit platforms `min(int, unsigned int)`.
On an implementation side the `min()` is defined for a fixed width
integer type to disambiguate uint from size_t on 32bit platforms,
and yet be able to use it for 32bit operands on 64bit platforms without
upcast.
Fixes 32bit platforms (such as i386) in Debian package build system.
Differential Revision: https://developer.blender.org/D13992
Previously, node selection made no distinction between a frame node and
other nodes. So a frame node would be selected by their whole rect or
center (depending on box/lasso/circle select). As a consequence of this,
box and lasso could not pratically be started inside a frame node (with
the intention to select a subset of contained child nodes) because the
frame would be selected immediately and tweak-transforming started.
Circle selecting would always contain the frame node as well (making
transforming a subset of nodes without also transforming the whole frame
impossible).
Now change selection behavior so that for all selection modes only the
border [the margin area that is automatically added around all nodes,
see note below] of a frame node is considered in selection. This makes
for a much more intuitive experience when arranging nodes inside frames.
note: to make the area of interest for selection/moving more obvious,
the cursor changes when hovering over (as is done for resizing).
note: this also makes the resize margin consistent with other nodes.
note: this also fixes right resize border (was exclusive instead of
inclusive as every other border)
Also fixes T46540.
Account for `CurveEval`, which stores the proper deformed and
procedurally created data, unlike the `nurb` list, which has always
just meant a copy of the original curve.
Also account for the case when the curve is empty by using a -1, 1,
fallback bounding box in that case, just like mesh objects.
The problem was that nullptr was returned which is a valid value for
Mesh * and hence the returned optional was treated as having some value.
There was no check for point clouds so that was fixed as well.
Differential Revision: https://developer.blender.org/D14026
Fixes T95384. New exporter was missing a fix for T94516 that recently got applied to the python exporter.
Also changed the obj export tests code so that when save_failing_test_output is requested and MTL result is different from the golden expectation, it is saved as well, similar to how it's done for the OBJ file result.
Caused by rBf75449b5f2b04b79, which was missing a null check when
attempting to extract a `CustomData` pointer from an mesh that might
be null if the object isn't a mesh object. The commit added null checks
elsewhere, so simply adding them here is a straightforward fix.
Fixes T95526, T95539
The new wavefront .obj exporter in 3.1 was producing slightly invalid parm line syntax (missing u), and was not setting first/last N params to zeroes and ones for curves with "endpoint" flag properly.
Since we have a node that sets a mesh's auto smooth angle
(unfortunately, in retrospect), we generally can't assume at all
that value is the same as whatever input mesh. Similar asserts
were removed previously in 8216b759e9. While the attempt
at assertions to clarify assumptions is noble, this one doesn't
make sense anymore.
I found this while investigating T95479.
Differential Revision: https://developer.blender.org/D14009
Detected on `amdgpu-pro` libGL implementation. The workaround is to not
use explicit location for vertex attributes. This is not a real problem
as we don't rely on them for now.
This was an oversight in the patch that added this node,
the default merge distance is meant to be the same as the weld
modifier, 0.001m, meaning by in most situations it removes
vertices generally at the same location.
Required to solve a crash on windows (T95367)
Mostly an uneventful update, except for FreeType
giving its cmake options a rename.
Reviewed By: brecht, sybren
Differential Revision: https://developer.blender.org/D13968
The check for existence of custom data layers did not take wrapper nature of
mesh into account.
Quickest and safest for 3.1 solution is to take care of branching of checks
in the draw manager.
Ideally both wrapper and mesh access will happen via the same public API
without branching in the "user" code. That is something outside of the fix
for the coming release though.
Differential Revision: https://developer.blender.org/D14013
Byte images are converted to float. Due to an issue how VSE cache is
freeing its images we cannot store these float buffers what leads
to recalculating it for each change in the image editor.
This fix will reduce the slowdown to areas that have the root cause of
the memory leak, so the buffers can be reused between refreshes.
NOTE: The root cause should still be fixed.
Thanks for reporting Sybren!
This was caused by macros interpreted as recursive. Workaround by
not using macros at all and just define local variables which
hopefully will be optimized.
Crash introduced by {rB0cb5eae}.
When switching to between drawing modes the region.draw_buffer could be
uninitialized when the gizmo depth test is performed. When the mouse is
placed on top of a gizmo part that could be highlighted would crash.
This fix adds a early exit when depth testing is requested, but there
isn't a draw_buffer. Not sure this is an root cause fix.
Reported by multiple animators in Blender Studio.
Technically, this can't be relied upon in the long term. It worked more or
less accidentally before. It was broken by a previous fix accidentally. I mainly
bring it back because rBa985f558a6eb16cd6f0 was not expected to have
this side effect.
Note, this change can result in slower performance. Writing to a vertex
groups is less efficient than using a generic attribute.
When viewing backdrop on top of the node grid, the grid would be
rendered black when the mode wasn't set to RGBA. This fix fixes this by
reverting the previous fix of drawing the backdrop and implement a
different one that recomputes the UV coordinates on the screen edges.
ED_transverts_create_from_obedit expected an evaluated object.
Add flag to request TX_VERT_USE_MAPLOC to be set, which avoids having to
calculate this data when it's not used as well as the requirement
that the input object be evaluated from the depsgraph.
In the future when we have a docs staging area it will be
important to change where this JSON is pulled from.
For now, always pull from the "Production" versions
This commit adds a version switch similar to the one on the user manual,
in the future it would be nice to refactor both of these into a more generic
code that works for both. Maybe develop this into a sphinx extension.
As part of this change I had to change how the blender hash is displayed.
Instead of the version hash in the top left it has been moved to the page footer.
This change will also be backported to 2.93 LTS, 2.93 LTS, and 3.0.
Iterating over scene's objects while we modify those (through proxy to
override conversion code) is call for problems (use after free etc.).
Instead, all proxy objects need to be gathered first in a temporary
list, and processed all at once in a second loop.
`BKE_collection_object_add` ensures given object is added to an editable
collection, and not e.g. a linked or override one.
However, some processes like do_version manipulate collections also from
libraries, i.e. linked collections, in those cases we need a version of
the code that unconditionnally adds the given object to the given
colleciton.
This is from patch D13988. It removes the "- New" from the menu of the
new obj exporter, changes the default addon to just io_import_obj,
and does the right versioning thing.
Also disables the python tests for the old python exporter.
This patch reverts the normal behavior of the spotlights. In the last fix,
the returned normal of a spot light was equal to its direction. This broke
some texturing methods used by artists.
Differential Revision: https://developer.blender.org/D13991
Those cases are fairly hard to track down... Added some more checks,
also at lower levels, more generic levels of object editing, and fixed
core check in liboverride (previously code was assuming that an override
of a collection only could have overrides of objects or linked objects,
but this is not necessarily true).
Use the ID.recalc flag to detect when updates after frame-change is
needed. Since comparing the last calculated frame doesn't take undo into
account (see code-comment for details).
`ID_RECALC_AUDIO_SEEK` has been renamed to `ID_RECALC_FRAME_CHANGE`
since this is not only related to audio however internally this flag is
still categorized in `NodeType::AUDIO`.
Reviewed By: sergey
Ref D13942
The issue was happening with a specific file where the ID management
code was not fully copying all modifiers because of the extra check
in the `BKE_object_support_modifier_type_check()`.
While it is arguable that copy-on-write should be a 1:1 copy there is
no real need to maintain the per-modifier pointer to its original.
Use its SessionUUID to perform lookup in the original datablock.
Downside of this approach is that it is a linear lookup instead of
direct pointer access, but the upside is that there is less pointers
to manage and that the file with unsupported modifiers does behave
correct without any asserts.
Differential Revision: https://developer.blender.org/D13993
The modifiers are mapped between original and evaluated objects based on
their session IDs. The pointer to original modifier is no longer needed
for the backup: it remained from the initial implementation which was
rewritten at some point.
This is a preparation for removal of the pointer to original modifier.
c9d9bfa84a caused a regression in when
the right-mouse select action was set to "Select & Tweak" (default).
Now the fallback tool works with RMB select as it did before.
Part of the resynching code would access collections' objects base
cache, which can be invalid at that point (due to previous ID remapping
and/or deletion). Use a custom recursive iterator over collections'
objects instead, since those 'raw' data like collection's objects list,
and collection's children lists, should always be valid.
Found while investigating a studio production file.
This is a temp fix for a memory leak where the VSE isn't aware that a
float representation of the image could exist. The VSE somehow doens't
clears it (refcounter is still 1).
The work around is just to let the image engine clean up all the data it
created. Potential this would add more overhead when buffers are needed
more than once.
This refactors how output attributes are computed in the geometry
nodes modifier. Previously, all output attributes were computed one
after the other. Every attribute was stored on the geometry directly
after computing it. The issue was that other output attributes might
depend on the already overwritten attributes, leading to unexpected
behavior.
The solution is to compute all output attributes first before changing the
geometry. Under specific circumstances, this refactor can result in a speedup,
because output attributes on the same domain are evaluated together now.
Overwriting existing might have become a bit slower, because we write the
attribute into new buffer instead of using the existing one.
Differential Revision: https://developer.blender.org/D13983
Mistake in the 974981a637: f the edit data is not present then the
origindex codepath is to be used. Added a brief note about it on the
top of the file.
More ideally would be to remove edit mesh from non-bmesh-wrappers
but this would require changes in the draw manager to make a proper
decision about drawing edit mode overlays.
Function `IMB_indexer_get_seek_pos()` can return non 0 seek position for
frame index 0. This causes seeking to incorrect GOP and scanning ends
with failiure.
Hard-code first frame index seek position to 0.
Differential Revision: https://developer.blender.org/D13974
If an entire cyclic stroke was selected, calling "Separate by Points"
would leave a gap in the new object (making the new stroke non-cyclic).
The patch makes sure that if we separate by points and all points are
selected, we fall back to separate by stroke.
Reviewed By: antoniov
Maniphest Tasks: T91463
Differential Revision: https://developer.blender.org/D12527
This patch fixes the error that pops up
(`Error: Unable to execute '... Mode Toggle', error changing modes`)
when trying to switch to e.g. draw mode from a grease pencil object
that was saved in draw mode in an inactive scene when the file was loaded.
Note that this does not fix the bigger issue described in T91243.
The fix makes sure that we reset all the mode flags on the grease pencil
data when we set the mode to object mode.
Reviewed By: antoniov
Maniphest Tasks: T89514
Differential Revision: https://developer.blender.org/D12419
The issue was that the code only looked at `dob->ob`
instead of `dob->ob_data` which is necessary since
rB5a9a16334c573c4566dc9b2a314cf0d0ccdcb54f.
This now uses the same pattern that is used in other places
where `BKE_object_replace_data_on_shallow_copy` is used.
Blender would have crashed when renaming bone in Edit Mode, Saving, and
than selecting/deselecting.
Caused by a mistake in the 0f89bcdbeb: can not "short-circuit" the
CoW update if it was explicitly requested.
Safest for now solution seems to be to store whether the CoW component
has been explicitly tagged, so that the following configuration can be
supported:
DEG_id_tag_update(id, ID_RECALC_GEOMETRY);
DEG_id_tag_update(id, ID_RECALC_COPY_ON_WRITE);
Differential Revision: https://developer.blender.org/D13966
Since splitting the depth and the color shader in the image engine the
backdrop wasn't visible anymore. The reson is that the min max uv
coordinates were never working for the node editor backdrop that uses
its own coordinate space.
This partial fix will ignore the depth test when drawing the color part
of the backdrop. This will still have artifacts that are visible when
showing other options as RGBA.
Proper fix would be to calculate the the uv vbo in uv space and not in
image space.
Can also happen in other places when the overlay engine is active. Some
parts of the overlay engine uses builtin shaders, but disable the color
space conversion to the target texture.
Currently there the overlay engine has its own set of libraries it could
include and defined a macro to pass-throught the color space conversion.
The library include mechanism currently fails when it couldn't find the
builtin library in the libraries of the overlay engine. This only
happened in debug mode.
This change will not fail, but warns the developer if a library could
not be included. In the future this should be replaced by a different
mechanism that can disable the builtin library. See {T95382}.
Since d9c6ceb3b8 partial updates to
normals in sculpt-mode were accumulating into the current normal
instead of a zeroed value.
Zero vertex normal values tagged for calculation before accumulation.
Reviewed By: HooglyBoogly
Ref D13975
From investigating T95185, it's important the normal returned by
SCULPT_vertex_normal_get always match the PBVH normal array.
Since this is always initialized in the PBVH, there is no advantage
in storing the normal array in two places, it only adds the possibility
that changes in the future causing different meshes normals to be used.
Split out from D13975.
Since 0ea0ccc4ff, `AV_PIX_FMT_YUV444P` pixel format was used for
lossless renders, which did override `AV_PIX_FMT_YUVA420P` format when
"RGBA" output is chosen. VP9 encoder doesn't seem to support
`AV_PIX_FMT_YUVA444P` pixel format, so use `AV_PIX_FMT_YUVA420P` for
lossless RGBA ouput instead.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D13947
Currently, audio and video strips are synchronized based on data from
media stream, which is nice, but this causes gaps between strips.
This synchronization was implemented by moving movie strip position
relative to sound, which doesn't make much sense for user which is
mostly interested in editing video.
Code was bit hard to read, so it has been simplified. Ideally video
stream time would be easily accessible so synchronization could be done
at any time, but this is not necessary at this point.
Reviewed By: zeddb
Differential Revision: https://developer.blender.org/D13948
Correct corner radius of the node outline to prevent a noticeable gap in
some cases.
---
Currently we make a small mistake in the creation of the node outline:
We offset the rectangle describing the outline by the outline thickness,
but we don't adjust the corner radius accordingly.
Therefore the rounded corner of the outline and the node body are not
concentric which can sometimes lead to a visible gap at the corner.
How noticeable it is depends on the theme, the screen's dpi and the
line thickness set in the preferences.
Simply adjusting the corner radius for the outline to also be increased
by the outline thickness fixes this small issue.
| display, line thickness | **patch** | **master** |
| --- | --- | --- |
| 1080p, default/thin | {F12835304} | {F12835305} |
| retina, thin | {F12835306} | {F12835307} |
The issue was mentioned by @hitrpr
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D13955
Use the evaluated mesh to generate the Adjacent Faces margin.
Baking used the evaluated mesh, but generating the margin used the base
mesh. This would lead to generating the margin from a stale UV map when the
UV editor was open and the UV map was changed. Fix it by passing the same
mesh as used for baking through to the margin generation.
Differential Revision: https://developer.blender.org/D13938
The new adjacent faces method border lookup fails in some directions around
45 degrees
* Use 8 Dijkstra directions (also diagonally) to determine which polygon is the
closest to each pixel. Using only Manhattan distance lead to large parts of
the texture which were matched with the wrong polygon.
* Use neighbroing polygons for edge search. The Adjacent Faces algorithm needs
to determine the closest edge, in UV space, each pixel. To speed this up
first as map is built which finds the closest polygon for each pixel along
horizontal, vertical and diagonal steps. Because this can sometimes be one
edge off we first look in the polygon from the map, if that fails also
check the edges of its neighbouring UV polygons.
Differential Revision: https://developer.blender.org/D13935
For those EEVEE passes a bit of trickery with pointer offsets allows to
get the owning viewlayer, so path generation is not too bad.
Also moved ViewLayer path generation itself into a public utils, to
avoid duplicating code.
NOTE: Doing the same for AOV would be needed, but since pointer offsets
won't help us here to find the owning viewlayer, not sure how to do it
nicely yet (only solution I think is to loop over all AOVs of all
ViewLayer of the scene to find it :( ).
Reported by Beau Gerbrands (@Beaug), thanks.
Image buffer was visible but buffer wasn't available. In the case
the color only overlay of the render result was displayed the image
buffer was not check to be valid.
This patch adds a null pointer check to check in `IMB_alpha_affects_rgb`
to solve this crash.
Empty (UDIM) tiles where drawn with a transparency checkerboard. They
should be rendered with a border background. The cause is that the image
engine would select a single area that contained all tiles and draw them
as being part of an image.
The fix is to separate the color and depth part of the image engine
shader and only draw the depths of tiles that are enabled.
Previously, the new obj exporter was only exporting per-vertex normals for faces
marked as "smooth". But a face can have custom normals, as soon as the normals
data layer exists. This change makes it follow the behavior of USD & Collada
exporters and the old Python one, which also export per-vertex normals as soon
as the layer is there. (From Patch D13957.)
This fixes a regression from rBa0edee712a79239133ff840f911f6416d4c41855.
Issue being the curve map not being initialized in the GPU shader function.
Fixes T95221
For every spline, *all* of the normals and tangents in the output
were normalized. The node is multithreaded, so sometimes a thread
overwrote the normalized result from another thread.
Fixing this problem also made the node orders of magnitude
faster when there are many splines.
The GLSL defines used to make the uniform names unusable for local variable
is being interpreted as recursive on some implementation.
This avoids it by create a second macro avoiding the recursion.
Sometime throughout development some checks got lost during refactor.
This change makes it so that if OIDN is not supported on the current
CPU Cycles will report an error and stop rendering. This behavior is
similar to when an OptiX denoiser is requested and there is no OptiX
compatible device available.
The easiest way to verify this change is to force return false from
the `openimagedenoise_supported()`.
Fixes Cycles part of the T94127.
Differential Revision: https://developer.blender.org/D13944
Parameter was used to still be compatible with the previous drawing mode.
The previous mode isn't available anymore so the parameter can should be
removed.
After showing the alpha in the image editor the setting was not reset
so all images in the editor showed as being transparent.
This commit fixes this by resetting the flag before updating.
In Outliner, 'Make Override Hierarchy' on an indirectly linked data would
fail in case some items higher up in the hierarchy also needed to be
overridden was also indirectly linked.
Adding better support for drawing huge images in the image/uv editor. Also solved tearing artifacts.
The approach is that for each image/uv editor a screen space gpu texture is created that only contains
the visible pixels. When zooming or panning the gpu texture is rebuild.
Although the solution isn't memory intensive other parts of blender memory usage scales together with
the image size.
* Due to complexity we didn't implement partial updates when drawing images tiled (wrap repeat).
This could be added, but is complicated as a change in the source could mean many different
changes on the GPU texture. The work around for now is to tag all gpu textures to be dirty when
changes are detected.
Original plan was to have 4 screen space images to support panning without gpu texture creation.
For now we don't see the need to implement it as the solution is already fast. Especially when
GPU memory is shared with CPU ram.
Reviewed By: fclem
Maniphest Tasks: T92525, T92903
Differential Revision: https://developer.blender.org/D13424
This patch reimplements the image partial updates. Biggest design motivation for the redesign
is that currently GPUTextures must be owned by the image. This reduces flexibility and adds
complexity to a single component especially when we want to have different structures.
The new design is not limited to GPUTextures and can also be used by reducing overhead in image
operations like scaling. Or partial image updating in Cycles.
The usecase in hand is that we want to support virtual images in the image editor so we can
work with images that don't fit in a single GPUTexture.
Using `BKE_image_partial_update_mark_region` or `BKE_image_partial_update_mark_full_update`
a part of an image can be marked as dirty. These regions are stored per ImageTile (UDIM).
When a part of the code wants to receive partial changes it needs to construct a `PartialUpdateUser`
by calling `BKE_image_partial_update_create`. As long as this instance is kept alive the changes can
be received.
When a user wants to update its own data it will call `BKE_image_partial_update_collect_changes`
This will collect the changes since the last time the user called this function. When the partial changes
are available the partial change can be read by calling `BKE_image_partial_update_get_next_change`
It can happen that the introduced mechanism doesn't have the data anymore to construct the
changes since the last time a PartialUpdateUser requested it. In this case it will get a request
to perform a full update.
Maniphest Tasks: T92613
Differential Revision: https://developer.blender.org/D13238
Assert when "//" prefixed relative paths are passed to
BLI_path_cmp_normalized as this can't be expanded
and it's possible the paths come from different blend files.
Changes to recent addition: c85c52f2ce.
Having both BLI_paths_equal and BLI_path_cmp made it ambiguous
which should be used, as `BLI_paths_equal` wasn't the equivalent to
`BLI_path_cmp(..) == 0` as it is for string equals macro `STREQ(..)`.
It's also a more specialized function which is not used for path
comparison throughout Blender's internal path handling logic.
Instead rename this `BLI_path_cmp_normalized` and return the result of
`BLI_path_cmp` to make it clear paths are modified before comparison.
Also add comments about the conventions for Blender's path comparison
as well as a possible equivalent to Python's `os.path.samefile`
for checking if two paths point to the same location on the file-system.
The `OUTLINER_OT_item_activate` operator, although it detects when
something changes, always returns `OPERATOR_FINISHED` and thus induces
the creation of undo steps.
So return `OPERATOR_CANCELLED` when nothing changes.
Ref T94080
Reviewed By: Severin
Maniphest Tasks: T94080
Differential Revision: https://developer.blender.org/D13638
- Fix assert on size.
- Fix void * casting.
- Pass extent by values.
- Add swap function to avoid letting the types copyable.
- Add back the GPUTexture * operator on TextureFromPool.
Does two main changes:
* Handle regions in the order as visible on screen. Practically this
just means handling overlapping regions before non-overlapping ones.
* Don't handle any other regions after having found one containing the
mouse pointer.
Fixes: T94016, T91538, T91579, T71899 (and a whole bunch of duplicates)
Addresses: T92364
Differential Revision: https://developer.blender.org/D13539
Reviewed by: Campbell Barton
Asserts that such events actually always lead to a handler return value
that actually keeps the event passing.
Reviewed by Campbell Barton as part of
https://developer.blender.org/D13539.
Though the edge vertices aren't really meant to have an order,
it can make a difference in operations when there isn't any other
information to make decisions from, like etruding a circle of
loose edges (the situation in the report). This commit changes
the order of the vertices in the final cyclic edge to go in the
same direction as all of the other edges.
The vertex and face normals from the input mesh
were used to calculate the normals on the result,
which could cause a crash because the result should
be about twice as large.
Also remove an unnecessary dirty tag, since it is handled
automatically when creating a new mesh or in the case
of the mirror modifier, when calculating the new custom
face corner normals.
Swap "active" and "selected" in the tooltip if the `use_reverse_transfer`
option is activated.
Reviewed By: mont29
Maniphest Tasks: T85233
Differential Revision: https://developer.blender.org/D13499
Also fixes similar issues regarding some liboverride menu entries.
Reviewed By: mont29
Maniphest Tasks: T93766
Differential Revision: https://developer.blender.org/D13513
Add `USD Preview Surface From Nodes` export option, to convert a
Principled BSDF material node network to an approximate USD Preview
Surface shader representation. If this option is disabled, the original
material export behavior is maintained, where viewport setting are saved
to the Preview Surface shader.
Also added the following options for texture export.
- `Export Textures`: If converting Preview Surface, export textures
referenced by shader nodes to a 'textures' directory which is a
sibling of the USD file.
- `Overwrite Textures`: Allow overwriting existing texture files when
exporting textures (this option is off by default).
- `Relative Texture Paths`: Make texture asset paths relative to the
USD.
The entry point for the new functionality is
`create_usd_preview_surface_material()`, called from
`USDAbstractWriter::ensure_usd_material()`. The material conversion
currently handles a small subset of Blender shading nodes,
`BSDF_DIFFUSE`, `BSDF_PRINCIPLED`, `TEX_IMAGE` and `UVMAP`.
Texture export is handled by copying texture files from their original
location to a `textures` folder in the same directory as the USD.
In-memory and packed textures are saved directly to the textures folder.
This patch is based, in part, on code in Tangent Animation's USD
exporter branch.
Reviewed By: sybren, HooglyBoogly
Differential Revision: https://developer.blender.org/D13647
Downgrade the Python zstandard from 0.17.0 to 0.16.0. The Python package
should be linked against the exact same version of libzstd as Blender is,
otherwise it will refuse to load from within the Blender executable.
Python zstandard 0.17.0 links to 1.5.1, whereas we need 1.5.0.
`chardet` was replaced by `charset_normalizer` for modern `requests`.
With this change, `{make,ninja} install` will also copy the latter into
Blender's install directory.
This opt-in functionnality enabled developper keep track of unused
resources present in the `GPUShaderCreateInfo` descriptors of their
shaders.
The output is pretty noisy at the moment so we do not enforce its usage.
While install_deps tries to stay as close as possible from official
Blender versions of the libraries, it also strives to use as many distro
packages as possible.
OSL 1.11.16.0 is the minimal version that builds with llvm13, which is
the default llvm/clang version in e.g. Debian testing.
Adds two new attribute outputs:
"Line" outputs the line number of the character.
"Pivot Point" outputs the selected pivot point position per char.
Some refactoring of the text layout code.
Differential Revision: https://developer.blender.org/D13694
`node_exec` had some code that was specific to texture/shader nodes.
These functions arent used outside there module so limit there declarations.
Also make a function static that is only used in `node_exec.c`
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D13899
The `TreeElement.rnaptr` was only needed for RNA tree-elements. Now it
can be gotten through the new type specific classes, e.g.
`TreeElementRNAProperty.getPointerRNA()`.
Plan is to remove things like `TreeElement.directdata` and to instead
expose specific queries in the new type specific tree-element classes.
e.g. like here: `TreeElementSequence.getSequence()`
For now uses `tree_element_cast<>()` to get the new type specific
tree-element, later these should replace `TreeElement` all together.
Add function to safely request the type-specific C++ element from a
C-style `TreeElement`. Looks like this:
```
TreeElementFoo *te_foo = tree_element_cast<TreeElementFoo>(te);
```
The "cast" will return null if the tree-element doesn't match the
requested type.
This is useful for the transition from the C-style type to the new ones.
This uses a light parser / string modification pass to convert
C++ enum declaration syntax to GLSL compatible one.
GLSL having no support for enums, we are forced to convert the
enum values to a series of constant uints.
The parser (not really one by the way), being stupidly simple,
will not change anything to the values and thus make some C++
syntax (like omitting the values) not work.
The string replacement happens on all GLSL files on startup.
I did not measure significant changes in blender startup speed.
There is plans to do all of this at compile time.
We limit the scope of the search to `.h` and `.hh` files to prevent
confusing syntax in `.glsl` files.
There is basic error reporting with file, line and char logging
for easy debuggabiliy.
The requirements to use this enum sharing system are already listed in
`gpu_shader_shared_utils.h` and repeated on top of the preprocessor
function.
Remove small ray offsets that were used to avoid self intersection, and leave
that to the newly added primitive object/prim comparison. These changes together
significantly reduce artifacts on small, large or far away objects.
The balance here is that overlapping primitives are not handled well and should
be avoided (though this was already an issue). The upside is that this is
something a user has control over, whereas the other artifacts had no good
manual solution in many cases.
There is a known issue where the Blender particle system generates overlapping
objects and in turn leads to render differences between CPU and GPU. This will
be addressed separately.
Differential Revision: https://developer.blender.org/D12954
Caused by 0f89bcdbeb where it was needed for cage and evaluated mesh
to have same behavior in respect of having edit_mesh pointer assigned.
This change makes it so that edit_data is not implied to exist when the
edit_mesh pointer is not null. This was already the case in some other
code.
Those cases are almost always synptoms of either bug in code, or broken
files. Re-doin resync on them only costs time and causes extra trash
data as a result, without really helping in any way.
Both new normals (from rBb7fe27314b25) and vpaint (from rBf7bbc7cdbb6c)
RNA arrays were missing the `PROPOVERRIDE_IGNORE`. Those huge blobs of
geometry data should never be processed by liboverride code.
This enables support for node group assets. Previously, node group
assets only worked when the "extended asset browser" experimental
features is enabled.
Differential Revision: https://developer.blender.org/D13748
For node groups there is no good default preview generation.
Nevertheless, t would be useful to generate a preview image for a
node group by rendering an object in some cases.
This commit adds a new operator that allows updating the preview
image for the active asset by rendering the active object.
Note, the operator can also be used for other asset types, not just
node groups.
The operator can be found in a menu right below the refresh-preview
button. Currently it is the only operator in that menu. In the future,
more operators to create previews may be added.
Differential Revision: https://developer.blender.org/D13747
The VSE and node editor only uses an overlay buffer to draw to the screen. The
GPUViewport assumes that platforms clears all textures during creation, but
they do not on selected platforms. What would lead to drawing from
uncleared memory.
This patch fixes this by clearing all viewport textures during creation.
Also adds a few things to GPUShader for easily create shaders.
Heavy usage of macros to compose the createInfo and avoid
duplications and copy paste bugs.
This makes the link between the shader request functions
(in workbench_shader.cc) and the actual createInfo a bit
obscure since the names are composed and not searchable.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D13910
Continuation of work started in 2e221de4ce and 249e4df110.
Adds new tree-element classes for RNA structs, properties and array
elements. This isn't exactly a copy and paste, even though logic should
effectively be the same. Further cleanups are included to share code in
a nice way, improve code with simple C++ features, etc.
This fixes failing test cases when using `make test`.
See {D13615} for more information.
The fix will perform the id remapping one item at a time. Although not
really nice, this isn't a bottleneck.
The failing test cases is because space_node stores pointers multiple
times and didn't update all pointers. It was not clear why it didn't do
it, but changing the behavior more to the previous behavior fixes the
issue at hand.
I prefer to remove the double storage of the node tree pointers (in
snode and path) to reduce pointer management complexity.
During sprite fright loading of complex scenes would spend a long time in remapping ID's
The remapping process is done on a per ID instance that resulted in a very time consuming
process that goes over every possible ID reference to find out if it needs to be updated.
If there are N of references to ID blocks and there are M ID blocks that needed to be remapped
it would take N*M checks. These checks are scattered around the place and memory.
Each reference would only be updated at most once, but most of the time no update is needed at all.
Idea: By grouping the changes together will reduce the number of checks resulting in improved performance.
This would only require N checks. Additional benefits is improved data locality as data is only loaded once
in the L2 cache.
It has be implemented for the resyncing process and UI editors.
On an Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz 16Gig the resyncing process went
from 170 seconds to 145 seconds (during hotspot recording).
After this patch has been applied we could add similar approach
to references (references between data blocks) and functionality (tagged deletion).
In my understanding this could reduce the resyncing process to less than a second.
Opening the village production file between 10 and 20 seconds.
Flame graphs showing that UI remapping isn't visible anymore (`WM_main_remap_editor_id_reference`)
* Master {F12769210 size=full}
* This patch {F12769211 size=full}
Reviewed By: mont29
Maniphest Tasks: T94185
Differential Revision: https://developer.blender.org/D13615
This reverts commit 086f191169.
There was apparently a problem using APPEND which wasn't referenced
in the commit log.
Added comment noting the reason for the discrepancy.
Use more efficient logic for detecting when gizmos are under the cursor.
Even though this isn't a bottleneck, it runs on cursor motion in the
3D viewport, so avoiding any lag here is beneficial.
The common case for cursor motion without any gizmos was always
drawing two passes (one small, then again if nothing was found).
Now a single draw call at the larger size is used.
In isolation this gives around 1.2x-1.4x speedup.
When there are multiple gizmos a depth-buffer picking is used
(similar to object / bone selection) which is more involved but
still only performs 2x draw calls since the result is cached for reuse.
See note in gizmo_find_intersected_3d for a more detailed explanation.
Also restore the depth values in the selection result as they're
needed for gizmos to use selection bias.
Broken since support for GL_SELECT was removed.
Early on in 2.8x development gizmo-depth used GL_SELECT,
which has been removed. Bind the depth buffer so occlusion queries
use the front-most gizmo.
While this report only mentions face-maps, gizmo depth was ignored in
all cases. This wasn't noticeable in most cases though since the
transform gizmo for example was placed so gizmos didn't overlap.
When calling GPU_select_cache_begin, checking the selection mode used
the last used selection mode, not the one about to be used.
Using border select, then picking would not use the selection cache.
This wasn't noticeable by users as failing to use cache just completes
the selection without it (drawing the depth buffer unnecessarily).
The OSL image compilation step needed to be taught about the new UVTILE
format for UDIM textures.
A small missing feature from OIIO[1] means this is a bit uglier than it
needs to be. Once we update to a version of OIIO with the fix we can
remove the string replace part.
[1] 35cb6a83e2
Differential Revision: https://developer.blender.org/D13912
This was already done for APPLE & WIN32, which would
reference these libraries twice.
Now append BROTLI_LIBRARIES to FREETYPE_LIBRARIES when they're
required for linking.
No functional changes as all references to FREETYPE_LIBRARIES also
used BROTLI_LIBRARIES.
When LIBDIR existed, searching for system libraries would always
first search 'LIBDIR'.
This meant "WITH_SYSTEM_*" would still prefer LIBDIR versions of
libraries if they exist.
The presence of LIBDIR also ignored the setting for WITH_STATIC_LIBS
which is now restored to the cached value once pre-compiled libraries
have been handled.
Fix formula in function `SEQ_sound_update_length`.
Formula for sound strip length was changed in commit ded68fb102, when
strip is added to timeline, but it was not changed in function
mentioned above.
This change applies only for automatic proxy building, when strip
is added to timeline. Manual building process is not affected.
Don't build proxy file if movie is already fast enough to seek.
To determine seek performance, check if whole GOP can be decoded
in 100 milliseconds.
To consider some variation in GOP size, large number of packets are
read, assuming that each packet will produce 1 frame. While this is not
technically correct, it does give quite accurate estimate of maximum GOP
size.
This test will ensure consistent performance on wide array of machines.
Check should be done in order of few milliseconds.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11671
This will allow building most deps with VS2019
SDL has some linker issues that are resolved in
a newer version, but that would be better handled
in a separate change.
VS2013 and VS2015 support which was broken has
been removed.
In order to use a workaround builtin uniform, we need to count it
just like other uniforms and give it some space in the name buffer.
This also fixes extensions being added after the uniform declaration.
All `#extension` directives are now part of the gl backend.
This commit moves the weld modifier code to the geometry module
so that it can be used in the "Merge by Distance" geometry node
from ec1b0c2014. The "All" mode is exposed in the node
for now, though we could expose the "Connected" mode in the future.
The modifier itself is responsible for creating the selections from
the vertex group. The "All" mode takes an `IndexMask` for the
selection, and the "Connected" mode takes a boolean array,
since it actually iterates over all edges.
Some disabled code for a BVH mode has not been copied over,
it's still accessible through the patches and git history anyway,
and it made the port slightly simpler.
Differential Revision: https://developer.blender.org/D13907
Previously it was only part of experimental features in beta, however now
renderers can render point clouds generated by geometry nodes. Adding or
converting a point cloud object directly is still hidden by default, since
there is no good way to edit it.
This implements a merge by distance operation for point clouds.
Besides the geometry input, there are two others-- a selection
input to limit the operation to certain points, and the merge
distance. While it would be a reasonable feature, the distance
does not support a field currently, since that would make
the algorithm significantly more complex.
All attributes are merged to the merged points, with the values
mixed together. This same generic method is used for all attributes,
including `position`. The `id` attribute uses the value from the
first merged index for each point.
For the implementation, most of the effort goes into creating a
merge map to speed up attribute mixing. Some parts are inherently
single-threaded, like finding the final indices accounting for the
merged points. By far most of the time is spend balancing the
KD tree.
Mesh support will be added in the next commit.
Differential Revision: https://developer.blender.org/D13649
Only show options that are valid for the used device (CPU, GPU, Multi).
Note: The panel isn't shown for OPTIX anymore, unless Multi device is used.
Reference: https://developer.blender.org/D13592
Make the Embree RTC_SCENE_FLAG_COMPACT flag optional and enabled per default.
Disabling it makes CPU rendering a bit faster in some scenes at the cost of a higher memory usage.
Barbershop renders about 3% faster, victor about 4% on CPU with compact BVH disabled.
Differential Revision: https://developer.blender.org/D13592
Several sub commands tried on their own
to locate python, given I wanted to look
in several locations for a broader libdir
compatibility this is best done in a
central location.
Python 3.9 is still preferred, but if
3.10-3.12 are available that be accepted
as well.
note: this is about the python version
make.bat uses to run various python helper
scripts, this change has no influence on
the python version blender itself uses.
With (center) position, radius and random value outputs.
Eevee does not yet support rendering point clouds, but an untested
implementation of this node was added for when it does.
Ref T92573
Movies with variable frame rate can cause mismatch of displayed frame
when proxies are used. Since proxies are not used for rendering, this
means, that output may be different than expected. This problem can be
avoided when timecodes are used.
Set used timecode to Record Run. Timecodes are built with proxies at
the same time, therefore if proxies are built and used this will
resolve possible mismatch of output.
Record run is chosen, because it will show frames based on time they
were encoded by encoder and should match behavior as if movie was
played back at normal speed. This change is done only for new strips
in order to not overwrite user defined settings.
Other minor changes:
- When proxies are enabled, size 25% is no longer set by default. It was mostly annoying anyway.
- Silence warning when timecode file is not present. This was introduced in 4adbe31e2f.
Previously use of timecodes was hard-coded in sequencer and this error would spam console if timecodes would be
enabled by default and proxies would be never built.
ref: T95093
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D13905
Using a negative linesize to flip an image vertically is supported in
ffmpeg but not for every function.
This method treats frames that need and those that do not need alignment
the same. An RGBA frame buffer with alignment that ffmpeg decides is
optimal for the CPU and build options is allocated by ffmpeg.
The `sws_scale` does the colorspace transformation into this RGBA frame
buffer without flipping. Now the image is upside down and aligned.
The combined unaligning and vertical flipping is then done by
`av_image_copy_to_buffer` which seems to handle negative linesize
correctly.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D13908
Layer resync code would not yet fully properly deal with all possible
invalid status of ViewLayer comming from those older files.
Now put 2.80-doversion specific fixes into their own dedicated
function, so that they do not affect actual regular layer resync code
anymore. Also added some sanity-checks in main
`BKE_layer_collection_sync` code.
The Brotli library only needs to be explicitly linked when using the
statically linked libraries. When using system libs they're shared, and
the .so loading mechanism takes care of dependencies.
Currently the Boolean Math node only has 3 basic logic gates:
AND, OR, and NOT. This commit adds 6 additional logic gates
for convenience and ease of use.
- **Not And (NAND)** returns true when at least one input is false.
- **Nor (NOR)** returns true when both inputs are false.
- **Equal (XNOR)** returns true when both inputs are equal.
- **Not Equal (XOR)** returns true when both inputs are different.
- **Imply (IMPLY)** returns true unless the first input is true and
the second is false.
- **Subtract (NIMPLY)** returns true when the first input is true and
the second is false.
Differential Revision: https://developer.blender.org/D13774
ssize_t is a posix type pyconfig.h previously
supplied for MSVC, it appears to have stopped
doing this in the python 3.10 headers.
Py_ssize_t is the type of the field this macro
actually returns, so best to to use that in our
code as well.
This reverts commit 948211679f.
This commit introduced some regressions in the test suite.
As this change is a core part of blender Bastien and I decided to revert
it as the solution isn't clear and needs more investigation.
The following tests FAILED:
62 - blendfile_liblink (SEGFAULT)
63 - blendfile_library_overrides (SEGFAULT)
It fails in (id_us_ensure_real)
This makes optionnal the use of a different interface for the geometry
shader stage output. When the vertex and geometry interface instance name
matches, a `_in` and `_out` suffix is added to the end of the instance name.
This makes it easier to have optional geometry shader stages.
# Conflicts:
# source/blender/gpu/intern/gpu_shader_create_info.hh
During sprite fright loading of complex scenes would spend a long time in remapping ID's
The remapping process is done on a per ID instance that resulted in a very time consuming
process that goes over every possible ID reference to find out if it needs to be updated.
If there are N of references to ID blocks and there are M ID blocks that needed to be remapped
it would take N*M checks. These checks are scattered around the place and memory.
Each reference would only be updated at most once, but most of the time no update is needed at all.
Idea: By grouping the changes together will reduce the number of checks resulting in improved performance.
This would only require N checks. Additional benefits is improved data locality as data is only loaded once
in the L2 cache.
It has be implemented for the resyncing process and UI editors.
On an Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz 16Gig the resyncing process went
from 170 seconds to 145 seconds (during hotspot recording).
After this patch has been applied we could add similar approach
to references (references between data blocks) and functionality (tagged deletion).
In my understanding this could reduce the resyncing process to less than a second.
Opening the village production file between 10 and 20 seconds.
Flame graphs showing that UI remapping isn't visible anymore (`WM_main_remap_editor_id_reference`)
* Master {F12769210 size=full}
* This patch {F12769211 size=full}
Reviewed By: mont29
Maniphest Tasks: T94185
Differential Revision: https://developer.blender.org/D13615
This patch migrates the draw manager hair refine compute shader to use
GPUShaderCreateInfo.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D13915
Allows to perform correction of coordinate delta/displacement in a
similar way of how sculpt mode handles sculpting on a deformed mesh.
An example of usecase of this is allowing riggers and sciprters to
improve corrective shapekey workflow.
The usage consists of pre-processing and access. For example:
object.crazyspace_eval(depsgraph, scene)
# When we have a difference between two vertices and want to convert
# it to a space to be stored, say, in shapekey:
delta_in_orig_space = rigged_ob.crazyspace_displacement_to_original(
vertex_index=i, displacement=delta)
# The reverse of above.
delta_in_deformed_space = rigged_ob.crazyspace_displacement_to_deformed(
vertex_index=i, displacement=delta)
object.crazyspace_eval_clear()
Fuller explanation with actual usecases and studio examples are written in
the comment:
https://developer.blender.org/D13892#368898
Differential Revision: https://developer.blender.org/D13892
Brotli seems to add a custom postfix to its static libraries by default,
but in Debian at least libraries are just named the same for both shared
and static versions, as usual.
So add standard name after static-specific ones.
Follow-up to rB4c617c06e9cb and rBa000de7c2a4d.
The evaluated mesh is a result of evaluated modifiers, and referencing
other evaluated IDs such as materials.
It can not be stored in the EditMesh structure which is intended to be
re-used by many areas. Such sharing was causing ownership errors causing
bugs like
T93855: Cycles crash with edit mode and simultaneous viewport and final render
The proposed solution is to store the evaluated edit mesh and its cage in
the object's runtime field. The motivation goes as following:
- It allows to avoid ownership problems like the ones in the linked report.
- Object level is chosen over mesh level is because the evaluated mesh
is affected by modifiers, which are on the object level.
This patch allows to have modifier stack of an object which shares mesh with
an object which is in edit mode to be properly taken into account (before
the change the modifier stack from the active object will be used for all
objects which share the mesh).
There is a change in the way how copy-on-write is handled in the edit mode to
allow proper state update when changing active scene (or having two windows
with different scenes). Previously, the copt-on-write would have been ignored
by skipping tagging CoW component. Now it is ignored from within the CoW
operation callback. This allows to update edit pointers for objects which are
not from the current depsgraph and where the edit_mesh was never assigned in
the case when the depsgraph was evaluated prior the active depsgraph.
There is no user level changes changes expected with the CoW handling changes:
should not affect on neither performance, nor memory consumption.
Tested scenarios:
- Various modifiers configurations of objects sharing mesh and be part of the
same scene.
- Steps from the reports: T93855, T82952, T77359
This also fixes T76609, T72733 and perhaps other reports.
Differential Revision: https://developer.blender.org/D13824
The Equalize Handles operator allows users to make selected handle
lengths uniform: either respecting their original angle from the key
control point or by flattening their angle (removing the overshoot
sometimes produced by certain handle types).
Design: T94172
Reviewed by: sybren
Differential Revision: https://developer.blender.org/D13702
Some IDs (like text ones) can be linked and only kept around thanks to
editors, allow making such IDs local in `BKE_lib_id_make_local_generic`.
Also refactor logic checking whether ID should be made directly local or
copied into its own util function, so that we can remain sure all
special-cases 'make local' code still uses the same logic here.
Currently there are many function declarations in `BKE_node.h` that
don't actually have implementations in blenkernel. This commit moves
the declarations to `NOD_composite.h`, `NOD_texture.h`, and
`NOD_shader.h` instead. This helps to clarify the purpose of the
different modules.
Differential Revision: https://developer.blender.org/D13869
Fixes T93680
For current drivers of Intel HD Graphics 4400 and 4600, various Program Introspection functions appear broken and return incorrect values, causing crashes in the current handling of SSBOs. Disable use of this feature on those devices. Add checks to features that use SSBOs (Hair and Subdivision Modifier).
Reviewed By: fclem, jbakker
Maniphest Tasks: T93680
Differential Revision: https://developer.blender.org/D13806
The point IBO should only have data for coarse vertices (or in general,
the vertices in the original mesh). As it used for displaying the
vertices for selection in edit mode, and as it indexes into the VBOs for
the positions and edit data, it is itself only indexed by coarse/
original vertex index.
For the subdivision case, this would allocate space for the final
subdivision vertex and reallocate to make room for loose geometry,
although only the first coarse vertex count amount of data would be.
Now just allocate for the required memory. Also reuse index buffer APIs
instead of doing manual work.
unity launches blender in background mode to do some
file conversions, ever since the launcher got introduced
this process broke.
The root cause here is: Unity looks up the default program
to launch .blend files with, which is now the launcher, then
launches it in background mode with a script to export the data.
The launcher however was designed to exit as quickly as
possible so there would not be an extra background process
lingering. It does not wait for blender to exit and does not
pass back any error codes.
This broke unity's workflow since it assumed if the process
exits and succeeds the data *must* be ready for reading which
no longer holds true.
This change keeps the launcher design as was previously,
*except* when launching in background mode, then it
waits and passes back any error codes, thus restoring
unity's workflow.
Differential Revision: https://developer.blender.org/D13894
Reviewed by: LazyDodo, Brecht
Previously weight paint wasn't hooked up to the "Smooth" and "Invert" modes.
With this patch it is not possible to use the "Smooth" and "Invert"
modifiers for the draw keybindings.
Reviewed By: Campbell Barton
Differential Revision: http://developer.blender.org/D13857
Add `libbrotlidec-static.a` and `libbrotlicommon-static.a` to the CMake
`$FREETYPE_LIBRARIES` variable; they'll be required when the Linux libs
for the FreeType upgrade lands (D13448).
The order of libraries is different compared to the similar lines in the
Windows and Apple CMake files, to prevent linker errors on Linux.
Some drivers/glsl compilers will not warn about multiple resources using
the same binding, creating silent errors.
This patch checks for this case and outputs a descriptive error message if
a particular createInfo merge error is founds.
Other validation can be added later.
This patch introduces an extrude node with three modes. The vertex mode
is quite simple, and just attaches new edges to the selected vertices.
The edge mode attaches new faces to the selected edges. The faces mode
extrudes patches of selected faces, or each selected face individually,
depending on the "Individual" boolean input.
The default value of the "Offset" input is the mesh's normals, which
can be scaled with the "Offset Scale" input.
**Attribute Propagation**
Attributes are transferred to the new elements with specific rules.
Attributes will never change domains for interpolations. Generally
boolean attributes are propagated with "or", meaning any connected
"true" value that is mixed in for other types will cause the new value
to be "true" as well. The `"id"` attribute does not have any special
handling currently.
Vertex Mode
- Vertex: Copied values of selected vertices.
- Edge: Averaged values of selected edges. For booleans, edges are
selected if any connected edges are selected.
Edge Mode
- Vertex: Copied values of extruded vertices.
- Connecting edges (vertical): Average values of connected extruded
edges. For booleans, the edges are selected if any connected
extruded edges are selected.
- Duplicate edges: Copied values of selected edges.
- Face: Averaged values of all faces connected to the selected edge.
For booleans, faces are selected if any connected original faces
are selected.
- Corner: Averaged values of corresponding corners in all faces
connected to selected edges. For booleans, corners are selected
if one of those corners are selected.
Face Mode
- Vertex: Copied values of extruded vertices.
- Connecting edges (vertical): Average values of connected selected
edges, not including the edges "on top" of extruded regions.
For booleans, edges are selected when any connected extruded edges
were selected.
- Duplicate edges: Copied values of extruded edges.
- Face: Copied values of the corresponding selected faces.
- Corner: Copied values of corresponding corners in selected faces.
Individual Face Mode
- Vertex: Copied values of extruded vertices.
- Connecting edges (vertical): Average values of the two neighboring
edges on each extruded face. For booleans, edges are selected
when at least one neighbor on the extruded face was selected.
- Duplicate edges: Copied values of extruded edges.
- Face: Copied values of the corresponding selected faces.
- Corner: Copied values of corresponding corners in selected faces.
**Differences from edit mode**
In face mode (non-individual), the behavior can be different than the
extrude tools in edit mode-- this node doesn't handle keeping the back-
faces around in the cases that the edit mode tools do. The planned
"Solidify" node will handle that use case instead. Keeping this node
simpler and faster is preferable at this point, especially because that
sort of "smart" behavior is not that predictable and makes less sense
in a procedural context.
In the future, an "Even Offset" option could be added to this node
hopefully fairly simply. For now it is left out in order to keep
the patch simpler.
**Implementation**
For the implementation, the `Mesh` data structure is used directly
rather than converting to `BMesh` and back like D12224. This optimizes
for large extrusion operations rather than many sequential extrusions.
While this is potentially more verbose, it has some important benefits:
First, there is no conversion to and from `BMesh`. The code only has
to fill arrays and it can do that all at once, making each component of
the algorithm much easier to optimize. It also makes the attribute
interpolation more explicit, and likely faster. Only limited topology
maps must be created in most cases.
While there are some necessary loops and allocations with the size of
the entire mesh, I tried to keep everything I could on the order of the
size of the selection rather than the size of the mesh. In that respect,
the individual faces mode is the best, since there is no topology
information necessary, and the amount of work just depends on the size
of the selection.
Modifying an existing mesh instead of generating a new one was a bit
of a toss-up, but has a few potential benefits:
- Avoids manually copying over attribute data for original elements.
- Avoids some overhead of creating a new mesh.
- Can potentially take advantage of future ammortized mesh growth.
This could be changed easily if it turns out to be the wrong choice.
Differential Revision: https://developer.blender.org/D13709
When moving to C++ field for initialization was removed.
Favor assignments to field names as it reads better and avoids bugs if
files are ever re-arranged as well as mistakes (see T94784).
Note that the generated optimized output is identical with GCC11.
This adds a selection field input to the node, faces that are selected and
meet the minimum vertex count threshold will be triangulated.
Differential Revision: https://developer.blender.org/D13804
Add a boolean option to have the Curve Handle Position input node return the
position of the handle relative to each point position.
Differential Revision: https://developer.blender.org/D12947
A large polygon in the file from the report caused `alloca`
to exceed the maximum stack size, causing a crash. Instead
of using `alloca`, use `blender::Array` with an inline buffer.
Based on a patch by Germano Cavalcante (@mano-wii).
Differential Revision: https://developer.blender.org/D13898
When enabled, it will keep contour around the object instead of hide them by rule of face mark,
so the object can always have full contour while filtering out some of the feature lines inside certain regions.
Reviewed By: Antonio Vazquez (antoniov), Aleš Jelovčan (frogstomp)
Differential Revision: https://developer.blender.org/D13847
Option to discard back faced triangles, this speeds up calculation especially for when you only want to show visible feature lines.
Reviewed By: Antonio Vazquez (antoniov), Aleš Jelovčan (frogstomp)
Differential Revision: https://developer.blender.org/D13848
Instead of splitting it at each occlusion change, it tolerates short segments of "zig-zag" occlusion incoherence and doesn't split the chain at these points, thus creating a much smoother result.
Reviewed By: Antonio Vazquez (antoniov), Aleš Jelovčan (frogstomp)
Differential Revision: https://developer.blender.org/D13851
This gives a modest speedup as calculating tessellation and face
normals at the same time can be more efficiently multi-threaded.
Also avoids calculating face normals twice,
oversight in d590e223da.
This commit improves NURBS knot generation by adding proper support
for the combination of the Bezier and cyclic options. In other cases
the resulting knot doesn't change. This cyclic Bezier knot is used to
create accurate accurate "Nurbs Circle", "Nurbs Cylinder" primitives.
"Nurbs Sphere" and "Nurbs Torus" primitives are also improved by
tweaking the spin operator.
The knot vector in 3rd order NURBS curve with Bezier option turned on
(without cyclic) is changed in comparison to previous calculations,
although it doesn't change the curve shape itself.
The accuracy of the of NURBS circle is fixed, which can be checked by
comparing with mesh circle. Tessellation spacing differences in
circular NURBS is also fixed, which is observable with the NURBS
cylinder and sphere primitives. These were causing seam-like effects.
This commit contains comments from Piotr Makal (@pmakal).
Differential Revision: https://developer.blender.org/D11664
Normal layers currently aren't stored in the undo step
mesh storage, since they are not stored in files at all.
However, the edit mesh expects normals to be fully
calculated, and does not keep track of a dirty state.
This patch updates the normals in the BMesh created
by loading an undo step.
Another option would be calculating the normals on
the undo mesh first, which might be better if Mesh
normal calculation is faster than BMesh calculation,
but the preferred method to access vertex normals fails
in this case, because the mesh runtime mutexes are not
initialized for undo-state meshes.
Differential Revision: https://developer.blender.org/D13859
From an error in rBcfa53e0fbeed, the vertex normals in `SculptSession`
seem to be used, but in the case when no "pbvh" is used, the value of
the pointer is never assigned.
Normals were not generally dirty before this "ensure" function with
regular sculpting operations, so this addition shouldn't have any cost.
Differential Revision: https://developer.blender.org/D13854
All other nodes with data type and domain choices have the domain
below the data type. Generally that order makes sense, because it's
consistent with nodes that have no domain drop-down.
Because this operator is used on original objects, it's best to tag
the normals dirty instead of explicitly calculating them, to avoid
unnecessarily storing normal layers on an original object (since
they might have to be recalculated during evaluation anyway).
There may be other places this change is helpful, but being
conservative is likely better for now.
Related to T95125
The new OBJ exporter did not handle object instances.
The fix is to use a dependency graph iterator, asking for instances.
Unfortunately that iterator makes a temporary copy of instance objects
that does not persist past the iteration, but we need to save all the
objects and meshes to write later, so the Object has to be copied now.
This changed some unit tests. Even though the tests don't have instancing,
the iterator also picks up some Text objects as Mesh ones (which is a good
thing), resulting in two more objects in the all_objects.obj file output.
With object collection properties open there was a huge delay when
switching active objects in a large scene, (~10k objects, ~5m vertices).
This is due to a non-optimal function to query all the collections the object is in.
To solve this the code can be simplified by using `bpy.types.Object.users_collection`
This returns all the collections the object is in removing the need to compute this in python.
The UI team requested adding woff2 support to freetype.
this required a new dependency brotli.
This changes adds brotili to the builder and bumps
freetype to version 2.11.0
As freetype now depends on other libraries, for consistency
all use of ${FREETYPE_LIBRARY} in cmake has been updated to
use ${FREETYPE_LIBRARIES} adjustments have been made in the
windows platform file, all other platforms use cmake's
FindFreeType.cmake which already sets this variable.
reviewed by: brecht
Differential Revision: https://developer.blender.org/D13448
This node can scale individual edges and faces. When multiple selected
faces/edges share the same vertices, they are scaled together.
The center and scaling factor is averaged in this case.
For some examples see D13757.
Differential Revision: https://developer.blender.org/D13757
Currently there is no way to flip normals in geometry nodes. This node
makes that possible by flipping the winding order of selected faces.
The node is purposely not called "Flip Normals", because normals are
derived data, changing them is only a side effect. The real change is
that the vertex and edge indices in the face corners of every selected
polygon are reversed, and face corner attribute data is reversed.
While there are existing utilities to flip a polygon and its custom
data, this node aims to process an attribute's data together instead
of processing all attributes separately for each index.
Differential Revision: https://developer.blender.org/D13809
Adds a second output to the Mesh Islands node that shows the total
number of islands as a field.
Differential Revision: https://developer.blender.org/D13700
This is not currently working, with an internal compiler error. However
we are currently using BVH2 instead of Metal RT. So this has no effect for
users, it's being committed to avoid the code getting outdated.
Ref T92573, T92212
Differential Revision: https://developer.blender.org/D13632
This shader needs to use the same interface as the OCIO shader. On Linux
and Windows this seems to be the case. On MacOS however there is a
mismatch that makes the overlay texture to be completely black when
switching to workbench in the Shader workspace.
This is just a temporarily work-around as this should be solved. Due to
the poor GPU debugging facilities on Mac we haven't been able to
pin-point the root cause.
Editing of generic attributes on the original objects in edit modes is
still very limited. However, when applying a geometry nodes modifier
that generates new attributes. These attributes will show up in the
Attributes panel.
Currently, our exporters are not capable of exporting generic attributes.
Therefore, for the time being, a work around is to apply geometry nodes
and then convert a generic attribute to a task specific attribute like a
uv map, vertex group or vertex color layer. Once more parts of Blender
support generic attributes, this will become less important.
Currently, only meshes are supported by the operator. However, it would
be relatively easy to extend it to other geometry types.
Differential Revision: https://developer.blender.org/D13838
Allow any non-modifier keyboard events to be used.
Note that the existing check for >= EVT_AKEY allowed NDOF and other
non-keyboard events (including modifiers, which didn't work).
- Use defines instead of magic numbers for F-Key & NDOF range checks.
- Use explicit values for NDOF event types.
- Minor clarification to doc-strings.
- Use doxy-sections.
There is probably a better solution that's possible, but the few other
things I tried didn't work, and the build error should be resolved for
the buildbots. This is similar to the "breaks" in the namespace for
functions declared in `ED_node.h`.
The code here was using velocity based interpolation copied from particles.
However there is no velocity cached in the rigid body point cache so the
results were non-sensical.
This adds a new curve primitive to generate arcs.
Radius mode (default): Generates a fixed radius arc on XY plane
with controls for Angle, Sweep and Invert.
Points mode: Generates a three point curve arc from Start to End
via Middle with an Angle Offset and option to invert the arc.
There are also outputs for arc center, radius and normal direction
relative to the Z-axis.
This patch is based on previous patches
D11713 and D13100 from @guitargeek. Thank you.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D13640
This fixes a similar issue as the previous commit, but this time the
continuous notifiers would be sent after redoing. E.g. after moving an
object, and then modifying the transform in the "Adjust Last Operation"
panel.
The thumbnail caching continuously sends `ND_SPACE_FILE_PREVIEW`
notifiers via a timer. But this timer was never ended properly after
thumbnails are fully loaded into the cache.
Wouldn't actually cause a refresh or redraw, send and process the
notifiers.
I already tried to avoid this for the asset view template, but
apparently that wasn't working correctly. For the File/Asset Browser I
never applied that fix to avoid possible regressions before the release.
This commit moves code in all node editor files to the
`blender::ed::space_node` namespace, except for C API
functions defined in `ED_node.h`, which can only be moved
once all areas calling them are moved to C++.
The change is fairly straightforward, I just moved a couple
of "ED_" code blocks around to make the namespace more
contiguous, and there's the method for adding a pointer to
a struct in a C++ namespace in DNA.
Differential Revision: https://developer.blender.org/D13871
This patch fixes a correctness issue discovered in the `int4 select(...)` function on Apple Silicon machines, which causes bad bvh2 builds. Although the generated bvh2s give correct renders, the resulting runtime performance is terrible. This fix allows us to switch over to bvh2 on Apple Silicon giving a significant performance uplift for many of the standard benchmarking assets. It also fixes some unit test failures stemming from the use of MetalRT, and trivially enables the new pointcloud primitive.
Ref T92212
Reviewed By: brecht
Maniphest Tasks: T92212
Differential Revision: https://developer.blender.org/D13877
Custom bones are drawn by instancing the GPUBatch of the base object. To
access the mesh and its GPUBatch, `BKE_object_get_evaluated_mesh` was
used. However, since GPU subdivision support, this will return a
subdivision wrapper which will never be drawn, and thus will have an
invalid batch, which caused the crash.
`BKE_object_get_evaluated_mesh_no_subsurf` should be used instead, to
return the mesh that will be drawn, and have the subdivision evaluated
on the GPU. Note that the rest of the draw code is already using this
function.
This adds vertex creasing support for OpenSubDiv for modeling, rendering,
Alembic and USD I/O.
For modeling, vertex creasing follows the edge creasing implementation with an
operator accessible through the Vertex menu in Edit Mode, and some parameter in
the properties panel. The option in the Subsurf and Multires to use edge
creasing also affects vertex creasing.
The vertex crease data is stored as a CustomData layer, unlike edge creases
which for now are stored in `MEdge`, but will in the future also be moved to
a `CustomData` layer. See comments for details on the difference in behavior
for the `CD_CREASE` layer between egdes and vertices.
For Cycles this adds sockets on the Mesh node to hold data about which vertices
are creased (one socket for the indices, one for the weigths).
Viewport rendering of vertex creasing reuses the same color scheme as for edges
and creased vertices are drawn bigger than uncreased vertices.
For Alembic and USD, vertex crease support follows the edge crease
implementation, they are always read, but only exported if a `Subsurf` modifier
is present on the Mesh.
Reviewed By: brecht, fclem, sergey, sybren, campbellbarton
Differential Revision: https://developer.blender.org/D10145
This brush fixes the random spikes that
occasionally happen in multires models.
These spikes can be nearly impossible to
fix manually and can make working with
multires a nightmare.
Since vertex and face normals are now stored on the mesh when necessary,
we can expose them as contiguous arrays of vectors in the Python API.
This can give render engines and other addons easy access to they data
for fast access through a regular collection property.
While "Mesh Vertex" still has a "normal" property in RNA, that is only
maintained in order to avoid breaking the existing API, and accessing
it is less efficient than accessing the normals directly.
I made the normal arrays read-only, because modifying them could
put them in an invalid state. This is inline with how we treat the data
internally, and helps keep relationships between data clear.
Differential Revision: https://developer.blender.org/D13839
When toggling to a File Browser from an Asset Browesr, the asset indexer
would be used to load files. I couldn't spot issues with that on a
quick look, but this should still be corrected.
Adds an "Asset Indexing" option (enabled by default) to Preferences >
Experimental > Debugging. This is useful when working on the asset
library loading.
An external CMake script can be used to debug CMake code, modify/read
target properties, inter-target dependencies, non-cache variables etc.
Reviewed by: LazyDodo, brecht
Differential Revision: https://developer.blender.org/D13830
This patch fixes crash T94736 on Metal in which the launch_params were not being updated to reflect destruction of MetalMem objects.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D13875
When copying strips between 2 scenes, it wasn't possible to copy
animation curves along with strips.
In this patch curves are copied into clipboard `ListBase`. When pasted,
original curves are moved into temporary `ListBase` and curves in
clipboard are moved into scene action. This is because when strips from
clipboard have to be renamed, function `SEQ_ensure_unique_name()` does
fix RNA paths of curves, but this is done globally for all curves within
action. After strips are renamed, restore original curves from backup.
Note: This patch handles only fcurves. Drivers and actions are currently
not handled anywhere in VSE.
Fixes T77530
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D13845
- Move functions that handle animation to own file - `animation.c`
- Refactor `SEQ_offset_animdata` and `SEQ_free_animdata` functions
- Add function `SEQ_fcurves_by_strip_get` to provide more granular
and explicit way for operators to handle animation
- Remove function `SEQ_dupe_animdata`, do curve duplication explicitly
in operator code, which makes more sense to do. Further this function
was also used for renaming strips which makes no sense.
- Refactor usage of function `SEQ_free_animdata` and remove XXX comment.
Now this functiuon is no longer called when `Sequence` data is freed
implicitly, it is done explicitly in high level function
`SEQ_edit_remove_flagged_sequences`
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D13852
The ustring is not a trivially copyable object from the C++ standard
point of view, so using memcpy on it is strictly wrong. In practice,
however, this is OK since it is just a thin wrapper around char*.
For now use explicit cast to void* same as it was done in other places
of ccl::array implementation. But also localize the place where memory
copy happens to make it easier to support proper non-trivial C++
objects in the future.
This merge the description into one struct only that can be more easily
copied during `finalize()`.
The in and out layout parameters are better named and extended with the
invocation count (with fallback support)
Route cause was data alignment mismatch between GPU and CPU. This
mismatch would not allow us to bind the UBO where data wasn't available
on the GPU.
Fixed by using float4 in stead of float2. This could eventually be
packed, but that would lead to less readable code.
Cause was incorrect logic when generating the resource layout. It the
explicit_location_support setting was ignored and the binding were
generated for image, uniform buffers and storage buffers.
- Add BM_mesh_debug_print & BM_mesh_debug_info.
- Report flags in Mesh.cd_flag in BKE_mesh_debug_print
- Move custom data printing into customdata.cc (noted as a TODO).
Note that the term "runtime" has been removed from
`BKE_mesh_runtime_debug_print` since these are useful for debugging any
kind of mesh data.
Code that handled merging & initializing custom-data from other
meshes sometimes missed checks for this flag, causing bevel weights to
lost when the mesh was converted to a BMesh.
The following changes are a more general fix for T94197.
- Add BM_mesh_copy_init_customdata_from_mesh_array which initializes
custom-data from multiple meshes at once.
As well as initializing custom-data layers from Mesh.cd_flag.
This isn't essential for boolean, however it avoids the overhead of
resizing custom-data layers.
- Loading mesh data into a BMesh now respects Mesh.cd_flag
instead of only checking if the BMesh custom-data-layer exists.
Without this, the order of meshes passed to BM_mesh_bm_from_me could
give different (incorrect) results.
- Copying mesh data now copies `cd_flag` too. This is a precaution
as in my tests evaluating modifiers these values always matched.
Nevertheless it's correct to copy this value as custom-data it's
self is being copied.
The buffer passed as an argument to `GPUFrameBuffer.read_color` is used
in the return of the function and therefore, if not used, its refcount is
decremented.
So be sure to increment the refcount of the already existing objects that
will be used in the return of a function.
This was the case for multi input sockets that have a link already.
Since we have multi input sockets, the way we use `socket_is_available`
is not really giving the expected result on these.
When used for input sockets the intention is to find a free socket
(either for noodle **replacement**, then it is always available, or just
the next free available socket).
Now I would think without the intention to replace an existing link, a
multi input socket should still be available.
From the inside of the function, the `replace` argument turns [namewise]
to `allow_used`, which sounds a little different (so one might argue
that if `allow_used` is `False` this should also trigger for already
connected multi input sockets).
In the end, this is an issue with the variable naming though, cant think
of a usecase where the patch change would really go against intentions.
Maniphest Tasks: T93413
Differential Revision: https://developer.blender.org/D13866
Bug possibly introduced in {rBc57e4418bb85aec8bd3615fd775b990badb43d30}.
Interestingly, the orientation set before (NORMAL), even different from
the orientation that was actually used, was allowing the use of
"orient_matrix" ("orient_matrix_type" should have been NORMAL in that
case too).
In any case, make sure the "orient_matrix_type" and "orient_type" are the
same so that the "orient_matrix" is used.
These operations (sorting and selecting all nodes) should generally
be handled by the node editor and not outside code. They were not
called outside of the node editor, so they can be moved to the editor's
`intern` header.
This file was added nine years ago, and was unused then.
Now with active tools we use a different approach to create
toolbars, so the file is not relevant.
This node allows accessing data of other elements in the context geometry.
It is similar to the Transfer Attribute node in Index mode. The main difference
is that this node does not require a geometry input, because the context
is used.
The node can e.g. be used to generalize what the Edge Vertices node is doing.
Instead of only being able to get the position of the vertices of an edge,
any field/attribute can be accessed on the vertices.
Differential Revision: https://developer.blender.org/D13825
Adds a second output to the edge angle node that shows the signed angle
between the two faces, where Convex angles are positive and Concave angles
are negative. This calculation is slower than the unsigned angle, so it
was best to leave both for times where the unsigned angle will suffice.
Differential Revision: https://developer.blender.org/D13796
It's now easier than before to do the interpolation of attributes
only for the elements that are actually used in some cases.
This can result in a speedup because unnecessary computations
can be avoided. See the patch for a simple performance test.
Differential Revision: https://developer.blender.org/D13828
Cause of the issue isn't that clear, but the NVIDIA GLSL compiler
complained that it couldn't find an overloaded function when the second
parameter is an interger. This change fixes it by using a float.
Display exact integer values of a floating point fields without
a fraction if the step is also an exact integer. This is intended
for cases when the value can technically be fractional, but most
commonly is supposed to be integer.
This handling is not applied if the field has any unit except frames,
because integer values aren't special for quantities like length.
The fraction is discarded in the normal display mode and when copying
the value to clipboard, but not when editing to remind the user that
the field allows fractions.
Differential Revision: https://developer.blender.org/D13753
Fix a precision issue when stepping down from 1 to 0 via the left
decrement button and step 100 results in a small nonzero value.
The reason is that 0.01 can't be precisely represented in binary
and converting to double before multiplication reveals this.
Ref D13753
This patch converts GPU_SHADER_2D_IMAGE_MULTI_RECT_COLOR shader to use
the GPUShaderCreateInfo pattern. It can be used as a reference when
converting other shaders.
In this special case the flat uniform vector cannot be used anymore as it
doesn't fit as push constants. To solve this a uniform buffer is used.
The previous optimization did not work in general yet, unfortunately.
This change makes the code more correct, but also brings back
some unnecessary updates (e.g. when creating a node group).
For boolean operations only one of the meshes was checked to determine
if bevel weights should be created.
Now initialize custom data from both meshes flag.
Note that this is a localized fix to be back-ported, further changes
will be made so edit-mode conversion accounts for this
without the caller needing explicit checks for custom-data flags.
Asset indexing was disabled as ID property indexing wasn't supported.
Now that ID property support is added we can enable asset indexing.
Check {T91406} for more information about asset indexing.
Object/collection asset workflow would need the bounding box for snapping.
The bounding box is stored using ID properties in the scene. Currently ID properties
aren't stored in the asset index, what would break object snapping. For this reason
Asset Indexing is turned off in mater. This patch will introduce the indexing of ID
properties what will allow the indexing to be turned on again.
## Data Mapping ##
For data mapping we store the internal structure of IDProperty to the indexer (including meta-data) to be able to deserialize it back.
```
[
{
"name": ..,
"value": ..,
"type": ..,
/* `subtype` and `length` are only available for IDP_ARRAYs. */
"subtype": ..,
},
]
```
| **DNA** | **Serialize type** | **Note** |
| IDProperty.name | StringValue| |
| IDProperty.type | StringValue| "IDP_STRING", "IDP_INT", "IDP_FLOAT", "IDP_ARRAY", "IDP_GROUP", "IDP_DOUBLE"|
| IDProperty.subtype | StringValue| "IDP_INT", "IDP_FLOAT", "IDP_GROUP", "IDP_DOUBLE" |
| IDProperty.value | StringValue | When type is IDP_STRING |
| IDProperty.value | IntValue | When type is IDP_INT |
| IDProperty.value | DoubleValue | When type is IDP_FLOAT/IDP_DOUBLE |
| IDProperty.value | ArrayValue | When type is IDP_GROUP. Recursively uses the same structure as described in this section. |
| IDProperty.value | ArrayValue | When type is IDP_ARRAY. Each element holds a single element as described in this section. |
NOTE: IDP_ID and IDP_IDARRAY aren't supported. The entry will not be added.
Example
```
[
{
"name": "MyIntValue,
"type": "IDP_INT",
"value": 6,
},
{
"name": "myComplexArray",
"type": "IDP_ARRAY",
"subtype": "IDP_GROUP",
"value": [
[
{
"name": ..
....
}
]
]
}
]
```
## Considered alternatives ##
- Add conversion functions inside `asset_indexer`; makes generic code part of a specific solution.
- Add conversion functions inside `BLI_serialize`; would add data transformation responsibilities inside a unit that is currently only responsible for formatting.
- Use direct mapping between IDP properties and Values; leads to missing information and edge cases (empty primitive arrays) that could not be de-serialized.
Reviewed By: Severin, mont29, HooglyBoogly
Maniphest Tasks: T92306
Differential Revision: https://developer.blender.org/D12990
Motion paths themselves aren't getting saved (not sure if they are
without overrides), but being able to override options makes them
usable even if it's necessary to regenerate every edit session.
Differential Revision: https://developer.blender.org/D13842
Some new obj exporter tests were disabled because the normals were different
in the last decimal place on different platforms.
The old python exporter deduped normals with their coordinates rounded to
four decimal places. This change does the same in the new exporter.
On one test, this produced a file 25% smaller and even ran 10% faster.
This can simplify iterating through all of the indices in the vector,
which is fairly common, since one of the benefits of the data structure
is that all values are contiguous.
This node's UI uses a multi-select enum to allow adjusting the
type of both handle sides with the same node. Since usually the
user wants to affect both handles, and it's the multi-select behavior
isn't obvious, selecting both by default is an improvement.
This significantly reduces discontinuities on UV seams, by giving a better
match of the texture filtered colors on both sides of the seam. It works by
using pixels from adjacent faces across the UV seam.
This new option is called "Adjacent Faces" and is the default. The old option
is called "Extend", and extends border pixels outwards.
Differential Revision: https://developer.blender.org/D13303
Use GPU-side scaling to speed up the scaling itself, and to avoid having
to copy the image buffer using the CPU. Mipmapping is used to get decent
filtering when downscaling without ugly artifacts.
In my comparisons, there was barely any difference between the methods
for DPIs >= 1. Below that, the result looks a bit different due to the
different filtering method.
See D13144 for screen-recordings showing the difference.
Part of T92922.
Differential Revision: https://developer.blender.org/D13144
Reviewed by: Jeroen Bakker
Typo in rB605cdc4346e5f82, both `eBlendfileLinkAppendForeachItemFlag`
flags had the same value, effectively preventing to filter out direct
vs. indirect appended items.
Override layers are a standard feature of Alembic, where archives can override
data from other archives, provided that the hierarchies match.
This is useful for modifying a UV map, updating an animation, or even creating
some sort of LOD system where low resolution meshes are swapped by high resolution
versions.
It is possible to add UV maps and vertex colors using this system, however, they
will only appear in the spreadsheet editor when viewing evaluated data, as the UV
map and Vertex color UI only show data present on the original mesh.
Implementation wise, this adds a `CacheFileLayer` data structure to the `CacheFile`
DNA, as well as some operators and UI to present and manage the layers. For both
the Alembic importer and the Cycles procedural, the main change is creating an
archive from a list of filepaths, instead of a single one.
After importing the base file through the regular import operator, layers can be added
to or removed from the `CacheFile` via the UI list under the `Override Layers` panel
located in the Mesh Sequence Cache modifier. Layers can also be moved around or
hidden.
See differential page for tests files and demos.
Reviewed by: brecht, sybren
Differential Revision: https://developer.blender.org/D13603
This is a first part of the Shader Create Info system could be.
A shader create info provides a way to define shader structure, resources
and interfaces. This makes for a quick way to provide backend agnostic
binding informations while also making shader variations easy to declare.
- Clear source input (only one file). Cleans up the GPU api since we can create a
shader from one descriptor
- Resources and interfaces are generated by the backend (much simpler than parsing).
- Bindings are explicit from position in the array.
- GPUShaderInterface becomes a trivial translation of enums and string copy.
- No external dependency to third party lib.
- Cleaner code, less fragmentation of resources in several libs.
- Easy to modify / extend at runtime.
- no parser involve, very easy to code.
- Does not hold any data, can be static and kept on disc.
- Could hold precompiled bytecode for static shaders.
This also includes a new global dependency system.
GLSL shaders can include other sources by using #pragma BLENDER_REQUIRE(...).
This patch already migrated several builtin shaders. Other shaders should be migrated
one at a time, and could be done inside master.
There is a new compile directive `WITH_GPU_SHADER_BUILDER` this is an optional
directive for linting shaders to increase turn around time.
What is remaining:
- pyGPU API {T94975}
- Migration of other shaders. This could be a community effort.
Reviewed By: jbakker
Maniphest Tasks: T94975
Differential Revision: https://developer.blender.org/D13360
For an upcoming refactoring of library remapping we want to be able to test if the logic won't change.
It also increased my experience inside the remapping codebase and find out what exactly needed to
be refactored.
This patch adds test cases for the core functionality of `foreach_libblock_remap_callback`. The test cases
don't cover of all the branches. Also pre-, post-processing, referencing and proxies are not tested.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D13815
Allows conveniently selecting an inverse of a collection.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D13846
This patch improves conversion method from NURBS to Bezier curves,
resulting in exact shape between those two types when provided with
a 3rd degree NURBS curve. Part of T86086.
See the differential revision for more comparisons.
The node still cannot account properly for a NURBS "order" other
than 4 and it does not take into account control point weights.
Differential Revision: https://developer.blender.org/D13546
Fix the description for WORKSPACE_OT_reorder_to_back to say "last" in
list rather than "first"
See D13696 for more details.
Differential Revision: https://developer.blender.org/D13696
Reviewed by Aaron Carlisle
The crash is due to the fact that GPU subdivision extraction routines
for edit data (including UVs) only worked for BMesh. However, a Mesh
based version is still needed for texture painting. This adds the
missing components. This also ensures all data are properly initialized
(at least the ones revealed by the bug).
This puts the loop over the final subdivision quads outside of the mesh
iteration callback. This can also allow for easier parallel execution in
the future if need be.
Since the option to enable linkers are booleans,
it's possible to enable them all at once.
Now only the first enabled + available linker is used
(with priority given to link is with better performance).
Set the linker using CMAKE_*_LINKER_FLAGS instead of {C/CXX}FLAGS.
There is no advantage in using the CFLAGS to set the linker, it has the
downside of triggering a full rebuild when changing the linker.
Tested building Blender and the bpy.so Python module.
Ref D13833
Reviewed by: sergey, brecht
Conceptually, this is the geometry that data is taken from,
not the target of an operation, so rename it from "Target"
to "Source". This was common user feedback and agreed
on in a recent sub-module meeting.
Before rB644e6c7a3e99ae1d43ed, `fill` was used in the error
cases, but now `fill_indices` is used, which doesn't work when
the span is empty (when only one output is used). The fix is just
to check for that case.
The search list only displayed the "Result" output socket in this
case, which is unexpected since dragging from an input gives the
operations in the list as well. Also use integer mode when
connecting to boolean sockets.
I noticed these when doing final cleanup on rBcfa53e0fbeed.
One use was removed in that commit, the others were unused
going further back a few years.
Differential Revision: https://developer.blender.org/D13834
`TreeElement` isn't a trivial type anymore, so `MEM_delete()` should be
called, which calls the destructor.
AFAICS this would cause a memory leak, since the contained `unique_ptr`
is allocated but not destructed correctly - but it's not using the
guarded allocator so woudn't be reported.
Smart pointers should be the default choice for C++ owning pointers,
since they let you manage memory using RAII.
Also moved type factory methods into static class functions.
Basically this removes any C <-> C++ glue code. C++ types are accessed
directly via the public C++ APIs.
Contains some related changes like, moving functions that were
previously declared in a now removed header to a different file, whose
header is the more appropriate place (and the source file as well).
But generally I tried to avoid other changes.
The switch to how normals are kept has led to tiny differences in
the normal output values on different platforms. Disabling the failing
tests while working on a solution to this problem.
Part of a5cb7c1e62 is reverted since it
created unknown pragma warning on windows.
Use a trick to do self-assigning.
Reviewed by Jacques Lucke in chat.
`BKE_layer_collection_sync` was missing a specific handling for one of
those pre-master collection cases,
NOTE: It is a bit unfortunate to have to do 'do-version' code in BKE...
At some point might look into moving this into actual `do_version` file,
but this is not fully trivial not critical improvement for now.
Caused by rBa5c59fb90ef9.
Since Group Input and Output sockets happen to be of type `SOCK_CUSTOM`
[and since rBa5c59fb90ef9 custom py defined sockets are too :)] a check
introduced in rB513066e8ad6f that prevents connections for `SOCK_CUSTOM`
triggered.
Now refine the check, so it specifically looks for NODE_GROUP_INPUT /
NODE_GROUP_OUTPUT, too (this keeps the intention intact to not connect
group inputs to group outputs and vice versa, but allows custom py
defined sockets to connect again) and put it in new utility function.
Maniphest Tasks: T94827
Differential Revision: https://developer.blender.org/D13817
Blender.xcodeproj User-supplied CFBundleIdentifier value
'org.blenderfoundation.blender' in the Info.plist must be the same as
the PRODUCT_BUNDLE_IDENTIFIER build setting value ''.
Reviewed By: #platform_macos, brecht
Differential Revision: https://developer.blender.org/D13826
Didn't remove the key-value pair since old Xcode behavior is not
known.
warning: LSMinimumSystemVersion of '10.9.0' is less than the value of
MACOSX_DEPLOYMENT_TARGET '10.13' - setting to '10.13'. (in target
'blender' from project 'Blender')
Reviewed By: #platform_macos, brecht
Differential Revision: https://developer.blender.org/D13831
Fix assignment warning
source/blender/blenlib/tests/BLI_any_test.cc:56:5: warning: explicitly
assigning value of variable of type 'blender::Any<void, 8, 8>'
to itself [-Wself-assign-overloaded]
c = c;
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D13835
2-point-curves are treated separately from 3plus-point-curves (assume a
lot of the twisting reduction can be skipped, so there is a dedicated
function for single segment curves).
And while using the 3plus-point-curves function [`make_bevel_list_3D`]
would actually work in this case, the dedicated function
`make_bevel_list_segment_3D` would only consider the tilt of the second
point and would just copy over the quat to the first point as well. Dont
see a reason for this, now consider the first point's tilt as well.
Maniphest Tasks: T94837
Differential Revision: https://developer.blender.org/D13813
Can give considerably faster linking, especially on system with many
cores.
The mold linker recently reached 1.0, see:
https://github.com/rui314/mold
The current stable release of GCC can't use this linker via
-fuse-ld=mold, so this patch uses the "-B" argument to add a binary
directory containing an alternate "ld" command that points to
"mold" (which is part of the default mold installation).
Some timing tests for linking full builds for AMD TR 3970X:
- BFD: 20.78 seconds.
- LLD: 12.16 seconds.
- GOLD: 7.21 seconds.
- MOLD: 2.53 seconds.
Ref D13807
Reviewed by: sergey, brecht
The mask is only used if it's not zero. Adding the normal mask made
it not zero, but it didn't include anything else, so all custom data
layers except normals were removed. The fix is to only add normals
to the mask when it should be used.
As described in T91186, this commit moves mesh vertex normals into a
contiguous array of float vectors in a custom data layer, how face
normals are currently stored.
The main interface is documented in `BKE_mesh.h`. Vertex and face
normals are now calculated on-demand and cached, retrieved with an
"ensure" function. Since the logical state of a mesh is now "has
normals when necessary", they can be retrieved from a `const` mesh.
The goal is to use on-demand calculation for all derived data, but
leave room for eager calculation for performance purposes (modifier
evaluation is threaded, but viewport data generation is not).
**Benefits**
This moves us closer to a SoA approach rather than the current AoS
paradigm. Accessing a contiguous `float3` is much more efficient than
retrieving data from a larger struct. The memory requirements for
accessing only normals or vertex locations are smaller, and at the
cost of more memory usage for just normals, they now don't have to
be converted between float and short, which also simplifies code
In the future, the remaining items can be removed from `MVert`,
leaving only `float3`, which has similar benefits (see T93602).
Removing the combination of derived and original data makes it
conceptually simpler to only calculate normals when necessary.
This is especially important now that we have more opportunities
for temporary meshes in geometry nodes.
**Performance**
In addition to the theoretical future performance improvements by
making `MVert == float3`, I've done some basic performance testing
on this patch directly. The data is fairly rough, but it gives an idea
about where things stand generally.
- Mesh line primitive 4m Verts: 1.16x faster (36 -> 31 ms),
showing that accessing just `MVert` is now more efficient.
- Spring Splash Screen: 1.03-1.06 -> 1.06-1.11 FPS, a very slight
change that at least shows there is no regression.
- Sprite Fright Snail Smoosh: 3.30-3.40 -> 3.42-3.50 FPS, a small
but observable speedup.
- Set Position Node with Scaled Normal: 1.36x faster (53 -> 39 ms),
shows that using normals in geometry nodes is faster.
- Normal Calculation 1.6m Vert Cube: 1.19x faster (25 -> 21 ms),
shows that calculating normals is slightly faster now.
- File Size of 1.6m Vert Cube: 1.03x smaller (214.7 -> 208.4 MB),
Normals are not saved in files, which can help with large meshes.
As for memory usage, it may be slightly more in some cases, but
I didn't observe any difference in the production files I tested.
**Tests**
Some modifiers and cycles test results need to be updated with this
commit, for two reasons:
- The subdivision surface modifier is not responsible for calculating
normals anymore. In master, the modifier creates different normals
than the result of the `Mesh` normal calculation, so this is a bug
fix.
- There are small differences in the results of some modifiers that
use normals because they are not converted to and from `short`
anymore.
**Future improvements**
- Remove `ModifierTypeInfo::dependsOnNormals`. Code in each modifier
already retrieves normals if they are needed anyway.
- Copy normals as part of a better CoW system for attributes.
- Make more areas use lazy instead of eager normal calculation.
- Remove `BKE_mesh_normals_tag_dirty` in more places since that is
now the default state of a new mesh.
- Possibly apply a similar change to derived face corner normals.
Differential Revision: https://developer.blender.org/D12770
Some of the message-bus macros are not safe to use in C++. This has come
up before, but no good solution was found. Now @LazyDodo, @HooglyBoogly
and I concluded this is the best duct tape "solution" for the moment.
The message-bus API should address this.
Today many users seem to think the output from
this node is a single curve with multiple splines.
This patch renames the geometry output socket
from "Curves" to "Curve Instances" to avoid confusion.
Differential Revision: https://developer.blender.org/D13693
We want to refactor quite some of the Outliner code using C++, this is a
logical step to help the transition to a new architecture.
Includes plenty of fixes to make this compile without warnings, trying
not to change logic. The usual stuff (casts from `void *`, designated
initializers, compound literals, etc.).
There were a couple of function name collisions which were caused
by sharing code with the mask modifier. I just removed the dependence
on the mask modifier now. The code that I duplicated for that purpose
is only in a legacy node, so it can be expected to be removed soonish.
And change install_deps.sh to build shared (instead of static) FFMPEG
libraries, for consistency with other library dependencies and to simplify
the logic. This may require users of install_deps.sh to rebuild FFMPEG.
This is the last step that lets us get rid of LIBPATH variables and
link_directories() entirely, as recommended by the CMake docs.
Some fixes were needed in the find FFMPEG module to make it actually work,
this code was unused up to now.
Followup to D8855.
Differential Revision: https://developer.blender.org/D9177
The fundamental limitation is that we can only have one instance
("dupli") generator at a time. Because the mesh output of a curve
object is output as an instances, the geometry set instances existed,
replacing the object as font instances. The "fix" is to reverse the
order. The behavior won't be perfect still, but at least the old
behavior will be preserved, which is really what matters for a
feature like this.
One way to take this change further would be completely disabling
regular geometry evaluation while this option is active. However,
it doesn't seem like that would actually improve the state of the code.
Differential Revision: https://developer.blender.org/D13768
When drawing windows on monitors that differ in DPI, we can sometimes
have UI elements draw at an incorrect scale. This patch just ensures
that `wm_window_make_drawable` always updates DPI.
See D10483 for more details.
Differential Revision: https://developer.blender.org/D10483
Reviewed by Brecht Van Lommel
Allow area Split to be initiated in any area and give better feedback
when not allowed.
See D13599 for more details and usage examples.
Differential Revision: https://developer.blender.org/D13599
Reviewed by Campbell Barton
And change install_deps.sh to build shared (instead of static) FFMPEG
libraries, for consistency with other library dependencies and to simplify
the logic. This may require users of install_deps.sh to rebuild FFMPEG.
This is the last step that lets us get rid of LIBPATH variables and
link_directories() entirely, as recommended by the CMake docs.
Some fixes were needed in the find FFMPEG module to make it actually work,
this code was unused up to now.
Followup to D8855.
Differential Revision: https://developer.blender.org/D9177
This is my attempt of adding defaults for the space clip editor struct
(in line with https://developer.blender.org/T80164).
It adds the default allocation for `SpaceClip` and
`node_composite_movieclip.cc`. This also solves the error below (for
C++ files using the DNA_default_alloc), which was put forward by
Sergey Sharybin.
Differential Revision: https://developer.blender.org/D13367
Reviewed by: Julian Eisel
While theorically fairly generic, current code is only enabled for
bledfile and liboverride views, and only used to display messages from
library IDs.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D13766
SVG files contained specific detailed pathnames on developers'
computers. These included full local user profile and path and should
not be in the release.
This patches corrects those lines. It also removes unused gradients from
the private icons SVG.
Differential Revision: https://developer.blender.org/D13344
Reviewed by: Yevgeny Makarov, Julian Eisel
This adds wrapper classes that make it easier to use GPU objects in C++.
####Motivations:####
- Easier handling of GPU objects.
- EEVEE rewrite already makes use of similar wrappers.
- There is the ongoing effort to use more C++ in the codebase
and lans to port more engines to it.
- The shader code refactor will make use of many UBOs with shared
struct declaration. This helps managing them.
- Safer handling of `TextureFromPool` which can't be bound as normal
texture (only texture ref) and can be better tracked in the future.
####Considerations:####
- I chose the `blender::draw` namespace because `blender::gpu` already has private classes (i.e: `gpu::Texture`).
- Theses are wrappers that manage a GPU object internally. They might be confused with actual `Texture`. However, the name `TextureWrapper` is a bit too much verbose in my opinion. I'm open to suggestion about better name.
Reviewed By: jbakker
Differential Revision: http://developer.blender.org/D13805
This patch implements the vector types (i.e:`float2`) by making heavy
usage of templating. All vector functions are now outside of the vector
classes (inside the `blender::math` namespace) and are not vector size
dependent for the most part.
In the ongoing effort to make shaders less GL centric, we are aiming
to share more code between GLSL and C++ to avoid code duplication.
####Motivations:
- We are aiming to share UBO and SSBO structures between GLSL and C++.
This means we will use many of the existing vector types and others
we currently don't have (uintX, intX). All these variations were
asking for many more code duplication.
- Deduplicate existing code which is duplicated for each vector size.
- We also want to share small functions. Which means that vector
functions should be static and not in the class namespace.
- Reduce friction to use these types in new projects due to their
incompleteness.
- The current state of the `BLI_(float|double|mpq)(2|3|4).hh` is a
bit of a let down. Most clases are incomplete, out of sync with each
others with different codestyles, and some functions that should be
static are not (i.e: `float3::reflect()`).
####Upsides:
- Still support `.x, .y, .z, .w` for readability.
- Compact, readable and easilly extendable.
- All of the vector functions are available for all the vectors types
and can be restricted to certain types. Also template specialization
let us define exception for special class (like mpq).
- With optimization ON, the compiler unroll the loops and performance
is the same.
####Downsides:
- Might impact debugability. Though I would arge that the bugs are
rarelly caused by the vector class itself (since the operations are
quite trivial) but by the type conversions.
- Might impact compile time. I did not saw a significant impact since
the usage is not really widespread.
- Functions needs to be rewritten to support arbitrary vector length.
For instance, one can't call `len_squared_v3v3` in
`math::length_squared()` and call it a day.
- Type cast does not work with the template version of the `math::`
vector functions. Meaning you need to manually cast `float *` and
`(float *)[3]` to `float3` for the function calls.
i.e: `math::distance_squared(float3(nearest.co), positions[i]);`
- Some parts might loose in readability:
`float3::dot(v1.normalized(), v2.normalized())`
becoming
`math::dot(math::normalize(v1), math::normalize(v2))`
But I propose, when appropriate, to use
`using namespace blender::math;` on function local or file scope to
increase readability.
`dot(normalize(v1), normalize(v2))`
####Consideration:
- Include back `.length()` method. It is quite handy and is more C++
oriented.
- I considered the GLM library as a candidate for replacement. It felt
like too much for what we need and would be difficult to extend / modify
to our needs.
- I used Macros to reduce code in operators declaration and potential
copy paste bugs. This could reduce debugability and could be reverted.
- This touches `delaunay_2d.cc` and the intersection code. I would like
to know @howardt opinion on the matter.
- The `noexcept` on the copy constructor of `mpq(2|3)` is being removed.
But according to @JacquesLucke it is not a real problem for now.
I would like to give a huge thanks to @JacquesLucke who helped during this
and pushed me to reduce the duplication further.
Reviewed By: brecht, sergey, JacquesLucke
Differential Revision: https://developer.blender.org/D13791
This patch implements the vector types (i.e:`float2`) by making heavy
usage of templating. All vector functions are now outside of the vector
classes (inside the `blender::math` namespace) and are not vector size
dependent for the most part.
In the ongoing effort to make shaders less GL centric, we are aiming
to share more code between GLSL and C++ to avoid code duplication.
####Motivations:
- We are aiming to share UBO and SSBO structures between GLSL and C++.
This means we will use many of the existing vector types and others
we currently don't have (uintX, intX). All these variations were
asking for many more code duplication.
- Deduplicate existing code which is duplicated for each vector size.
- We also want to share small functions. Which means that vector
functions should be static and not in the class namespace.
- Reduce friction to use these types in new projects due to their
incompleteness.
- The current state of the `BLI_(float|double|mpq)(2|3|4).hh` is a
bit of a let down. Most clases are incomplete, out of sync with each
others with different codestyles, and some functions that should be
static are not (i.e: `float3::reflect()`).
####Upsides:
- Still support `.x, .y, .z, .w` for readability.
- Compact, readable and easilly extendable.
- All of the vector functions are available for all the vectors types
and can be restricted to certain types. Also template specialization
let us define exception for special class (like mpq).
- With optimization ON, the compiler unroll the loops and performance
is the same.
####Downsides:
- Might impact debugability. Though I would arge that the bugs are
rarelly caused by the vector class itself (since the operations are
quite trivial) but by the type conversions.
- Might impact compile time. I did not saw a significant impact since
the usage is not really widespread.
- Functions needs to be rewritten to support arbitrary vector length.
For instance, one can't call `len_squared_v3v3` in
`math::length_squared()` and call it a day.
- Type cast does not work with the template version of the `math::`
vector functions. Meaning you need to manually cast `float *` and
`(float *)[3]` to `float3` for the function calls.
i.e: `math::distance_squared(float3(nearest.co), positions[i]);`
- Some parts might loose in readability:
`float3::dot(v1.normalized(), v2.normalized())`
becoming
`math::dot(math::normalize(v1), math::normalize(v2))`
But I propose, when appropriate, to use
`using namespace blender::math;` on function local or file scope to
increase readability.
`dot(normalize(v1), normalize(v2))`
####Consideration:
- Include back `.length()` method. It is quite handy and is more C++
oriented.
- I considered the GLM library as a candidate for replacement. It felt
like too much for what we need and would be difficult to extend / modify
to our needs.
- I used Macros to reduce code in operators declaration and potential
copy paste bugs. This could reduce debugability and could be reverted.
- This touches `delaunay_2d.cc` and the intersection code. I would like
to know @howardt opinion on the matter.
- The `noexcept` on the copy constructor of `mpq(2|3)` is being removed.
But according to @JacquesLucke it is not a real problem for now.
I would like to give a huge thanks to @JacquesLucke who helped during this
and pushed me to reduce the duplication further.
Reviewed By: brecht, sergey, JacquesLucke
Differential Revision: https://developer.blender.org/D13791
Fixes issue T94603
It adds a new compositor node called Scene Time which is already present as a geo node, having the same basic nodes available in all node trees is a nice thing to have.
Renames "Time" node to "Time Curve", this is done to avoid confusion between the Time node and the Scene Time node.
Reviewed By: jbakker
Maniphest Tasks: T94603
Differential Revision: https://developer.blender.org/D13762
This patch implements the vector types (i.e:float2) by making heavy
usage of templating. All vector functions are now outside of the vector
classes (inside the blender::math namespace) and are not vector size
dependent for the most part.
In the ongoing effort to make shaders less GL centric, we are aiming
to share more code between GLSL and C++ to avoid code duplication.
Motivations:
- We are aiming to share UBO and SSBO structures between GLSL and C++.
This means we will use many of the existing vector types and others we
currently don't have (uintX, intX). All these variations were asking
for many more code duplication.
- Deduplicate existing code which is duplicated for each vector size.
- We also want to share small functions. Which means that vector functions
should be static and not in the class namespace.
- Reduce friction to use these types in new projects due to their
incompleteness.
- The current state of the BLI_(float|double|mpq)(2|3|4).hh is a bit of a
let down. Most clases are incomplete, out of sync with each others with
different codestyles, and some functions that should be static are not
(i.e: float3::reflect()).
Upsides:
- Still support .x, .y, .z, .w for readability.
- Compact, readable and easilly extendable.
- All of the vector functions are available for all the vectors types and
can be restricted to certain types. Also template specialization let us
define exception for special class (like mpq).
- With optimization ON, the compiler unroll the loops and performance is
the same.
Downsides:
- Might impact debugability. Though I would arge that the bugs are rarelly
caused by the vector class itself (since the operations are quite trivial)
but by the type conversions.
- Might impact compile time. I did not saw a significant impact since the
usage is not really widespread.
- Functions needs to be rewritten to support arbitrary vector length. For
instance, one can't call len_squared_v3v3 in math::length_squared() and
call it a day.
- Type cast does not work with the template version of the math:: vector
functions. Meaning you need to manually cast float * and (float *)[3] to
float3 for the function calls.
i.e: math::distance_squared(float3(nearest.co), positions[i]);
- Some parts might loose in readability:
float3::dot(v1.normalized(), v2.normalized())
becoming
math::dot(math::normalize(v1), math::normalize(v2))
But I propose, when appropriate, to use
using namespace blender::math; on function local or file scope to
increase readability. dot(normalize(v1), normalize(v2))
Consideration:
- Include back .length() method. It is quite handy and is more C++
oriented.
- I considered the GLM library as a candidate for replacement.
It felt like too much for what we need and would be difficult to
extend / modify to our needs.
- I used Macros to reduce code in operators declaration and potential
copy paste bugs. This could reduce debugability and could be reverted.
- This touches delaunay_2d.cc and the intersection code. I would like to
know @Howard Trickey (howardt) opinion on the matter.
- The noexcept on the copy constructor of mpq(2|3) is being removed.
But according to @Jacques Lucke (JacquesLucke) it is not a real problem
for now.
I would like to give a huge thanks to @Jacques Lucke (JacquesLucke) who
helped during this and pushed me to reduce the duplication further.
Reviewed By: brecht, sergey, JacquesLucke
Differential Revision: http://developer.blender.org/D13791
setBUILD_CMAKE_ARGS=%BUILD_CMAKE_ARGS% -G "Visual Studio %BUILD_VS_VER%%BUILD_VS_YEAR%%BUILD_GENERATOR_POST%"%BUILD_PLATFORM_SELECT%%TESTS_CMAKE_ARGS%%CLANG_CMAKE_ARGS%%ASAN_CMAKE_ARGS%%PYDEBUG_CMAKE_ARGS%
@@ -1369,6 +1374,12 @@ class CyclesPreferences(bpy.types.AddonPreferences):
default=False,
)
use_metalrt:BoolProperty(
name="MetalRT (Experimental)",
description="MetalRT for ray tracing uses less memory for scenes which use curves extensively, and can give better performance in specific cases. However this support is experimental and some scenes may render incorrectly",
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.