This utility is useful when using C types that own some resource in
a C++ file. It mainly helps in functions that have multiple return
statements, but also simplifies code by moving construction and
destruction closer together.
Differential Revision: https://developer.blender.org/D14215
This fix contains two parts. There was one critical mistake where
order of two indices was wrong when removing constraint planes from
the array. The other changes are improvements to the used thresholds
to keep everything numerically stable.
Differential Revision: http://developer.blender.org/D14183
This branch was previously run when the action had been handled,
since action checks were removed it was running. This assignment
does nothing but shouldn't be kept.
previously_visible_components_mask was not preserved for Image ID nodes, which
meant it was always detected as newly visible and tagged to be updated, which
in turn caused the geometry nodes using it to be always updated also.
Reviewed By: sergey, JacquesLucke
Maniphest Tasks: T94609
Differential Revision: https://developer.blender.org/D14217
Supporting two kinds of dragging is redundant, remove tweak events as
they only supported 3 mouse buttons and added complexity from using the
'value' to store directions.
Support only click-drag events (KM_CLICK_DRAG) which can be used with
any keyboard or mouse button.
Details:
- A "direction" member has been added to keymap items and events which
can be used when the event value is set to KM_CLICK_DRAG.
- Keymap items are version patched.
- Loading older key-maps are also updated.
- Currently the key-maps stored in ./release/scripts/presets/keyconfig/
still reference tweak events & need updating. For now they are updated
on load.
Note that in general this wont impact add-ons as modal operators don't
receive tweak events.
Reviewed By: brecht
Ref D14214
Clicking and dragging markers accumulates flags from multiple operators
in a way that can't be interpreted when combine.
Follow tweak behavior for cancelling click-drag events.
Replacing tweak key-map items with click-drag caused selection
in the graph/sequencer/node editors to ignore drag events
(all uses of WM_generic_select_modal).
Operators that return OPERATOR_PASS_THROUGH | OPERATOR_FINISHED
result in the event loop considering the event as being handled.
This stopped WM_CLICK_DRAG events from being generated which is not the
case for tweak events.
As click-drag is intended to be compatible with tweak events,
accept drag events when WM_HANDLER_BREAK isn't set or when
wm_action_not_handled returns true.
A simple case of missing the tangent VBO. The tangents are computed from
the coarse mesh, and interpolated on the GPU for the final mesh. Code for
initializing the tangents, and the vertex format for the VBO was
factored out of the coarse extraction routine, to be shared with the
subdivision routine.
Last step of proxy building caused crash due to thread race contition
when acessing ed->seqbase.
Looking at code, it seems that calling IMB_close_anim_proxies on
original strips is unnecessary so this code was removed to resolve this
issue.
Locking seqbase data may be possible, but it's not very practical as
many functions access this data on demand which can easily cause
program to freeze.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D14210
Mousemove events are sent to windows.
In Windows OS, almost all mousemove events are sent to the window whose
mouse cursor is over.
On MacOS, the window with mousemove events is always the active window.
It doesn't matter if the mouse cursor is inside or outside the window.
So, in order for non-active windows to also have events,
`WM_window_find_under_cursor` is called to find those windows and send
the same events.
The problem is that to find the window, `WM_window_find_under_cursor`
only has the mouse coordinates available, it doesn't differentiate
which monitor these coordinates came from.
So the mouse on one monitor may incorrectly send events to a window on
another monitor.
The solution used is to use a native API on Mac to detect the window
under the cursor.
For Windows and Linux nothing has changed.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D14197
The subdivision modifier for Grease Pencil handles closed strokes
correctly now and does converge to the same shape as the mesh
subdivision surface.
Differential Revision: http://developer.blender.org/D14218
Create `Curves` directly, instead of using the conversion from
`CurveEval`. This means that the `tilt` and `radius` attributes
don't need to be allocated. The old behavior is kept by using the
right defaults in the conversion to `CurveEval` later on.
The Bezier segment primitive isn't ported yet, because functions
to provide easy access to built-in attributes used for Bezier curves
haven't been added yet.
Differential Revision: https://developer.blender.org/D14212
Currently, any time a Curves data-block is created, the `curves_random`
function runs, filling it with 500 random curves, also adding a radius
attribute. This is just left over from the prototype in the initial
commit that added the type.
This commit moves the code that creates the random data to the curve
editors module, like the other primitives are organized.
Differential Revision: https://developer.blender.org/D14211
This patch hides the MetalRT checkbox for AMD GPUs, pending fixes for MetalRT argument encoding on AMD.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D14175
The issue was uncovered by the 0f89bcdbeb, but the root cause goes
into a much earlier design violation happened in the code: the modifier
evaluation function is modifying input mesh, which is not something
what is ever expected.
Bring code closer to the older state where such modification is only
done for the object in edit mode.
---
From own tests works seems to work fine, but extra eyes and testing
is needed.
Differential Revision: https://developer.blender.org/D14191
db4313610c added support for modifier
keys to be released while dragging.
The key release events set wmEvent.prev_type which is used select the
drag threshold, causing the wrong threshold to be used.
Add wmEvent.prev_click_type which is only set when the drag begins.
The image engine is depth aware when using tile drawing the depth is
only updated for the central image what lead to showing the background
on top of other areas.
Also makes sure that switching the tile drawing would lead to an update
of the texture slots.
When dimension of images aren't a multifold of 256 parts of the gpu
textures are not updated. This patch will calculate the correct part of
the image that needs to be reuploaded.
Internally the update tiles are 256x256. Due to some miscalculations
tiles were not generated correctly if the dimension of the image wasn't
a multifold of 256.
Previously we used to cache a float image representation of the image in
rect_float. This adds some incorrect behavior as many areas only expect
one of these buffers to be used.
This patch stores float buffers inside the image engine. This is done per
instance. In the future we should consider making a global cache.
Use a flag for events to avoid adding struct members every time a new
kind of tag is needed - so events remain small.
This also simplifies copying settings as flags can be copied at once
with a mask.
- Rename ED_view3d_win_to_delta `mval` argument to `xy_delta` as it
as it was misleading since this is an screen-space offset not a region
relative cursor position (typical use of the name `mval`).
Also rename the variable passed to this function which also used the
term `mval` in many places.
- Re-order the output argument of ED_view3d_win_to_delta last.
use an r_ prefix for return arguments.
- Document how the `zfac` argument is intended to be used.
- Split ED_view3d_calc_zfac into two functions as the `r_flip` argument
was only used in some special cases.
Small fixes to the drawing of multi input sockets:
- Make the outline thickness consistent with normal node sockets,
independent from the screen DPI.
- Only highlight multi input sockets when they are actually selected.
- Skip selected multi inputs when drawing normal selected sockets.
Differential Revision: https://developer.blender.org/D14192
Currently the code expects the radius attribuet to always exist on the
input Curves. This won't be true in the future though, so the correct
default value of one should be used when creating the data on CurveEval,
where the data is not optional.
This commit improves the drawing of selected node links:
- Highlight the entire link to make it easier to spot where the link
is going/coming from.
- Always draw selected links on top, so they are always clearly
visible.
- Don't fade selected node links when the sockets they are connected
to are out out view.
- Dragged node links still get a partial highlight when they are only
attached to one socket.
Differential Revision: https://developer.blender.org/D11930
Add a std::move in some places to prevent arrays from being copied.
These cases were potentially optimized by the compiler, but this makes
it more explicit.
Differential Revision: https://developer.blender.org/D14129
New code from the vertex normal refactor cfa53e0fbe combined with older code
from 592759e3d6 that disabled instancing for custom normals and autosmooth
meant that instancing was always disabled.
However we do not need to disable instancing for custom normals and autosmooth
at all, this can be shared between instances just fine.
The constraint operators for delete, apply, copy and copy to selected
were missing null checks and could crash blender when called wrongly
from the python api.
Differential Revision: http://developer.blender.org/D14195
This commit changes `CurveComponent` to store the new curve
type by adding conversions to and from `CurveEval` in most nodes.
This will temporarily make performance of curves in geometry nodes
much worse, but as functionality is implemented for the new type
and it is used in more places, performance will become better than
before.
We still use `CurveEval` for drawing curves, because the new `Curves`
data-block has no evaluated points yet. So the `Curve` ID is still
generated for rendering in the same way as before. It's also still
needed for drawing curve object edit mode overlays.
The old curve component isn't removed yet, because it is still used
to implement the conversions to and from `CurveEval`.
A few more attributes are added to make this possible:
- `nurbs_weight`: The weight for each control point on NURBS curves.
- `nurbs_order`: The order of the NURBS curve
- `knots_mode`: Necessary for conversion, not defined yet.
- `handle_type_{left/right}`: An 8 bit integer attribute.
Differential Revision: https://developer.blender.org/D14145
The UI context was only set for the operator polls, but not for the
drop-box polls. Initially I thought this wouldn't be needed since the
drop-boxes should leave up context polls to the operator, but in
practice that may not be what API users expect. Plus the tooltip for the
drop-boxes will likely have to access context anyway, so they should be
able to check it beforehand.
Motion paths can now be initialised to more sensible frame ranges,
rather than simply 1-250:
- Scene Frame Range
- Selected Keyframes
- All Keyframes
The Motion Paths operators are now also added to the Object context menu
and the Dopesheet context menu.
The scene range operator was removed, because the operators now
automatically find the range when baking the motion paths.
The clear operator now appears separated in "Selected Only" and "All",
because it was not clear for the user what the button was doing.
Reviewed By: sybren, looch
Maniphest Tasks: T93047
Differential Revision: https://developer.blender.org/D13687
Caused by 0f89bcdbeb and was not fully addressed by 6f9828289f:
tagging an ID with flag 0 is to be seen as an explicit tag for copy
on write.
Would be nice to either consolidate code paths of flag 0 and explicit
component tag, or get rid of tagging with 0 flag, but that is above of
what we can do for the upcoming release.
When using ancored stroked the diameter of the stroke can be 0 what
leads to a division by zero that on certain platforms wrap to a large
negative number that cannot be looked up. This fix will clamp the size
of the brush to 1.
Now drag & tweak can have modifier keys to be released while dragging.
without this, modifier keys needs to be held which is more noticeable
for tablet input or whenever the drag threshold is set to a large value.
Resolves T89989.
This fixes T93051, T76405 and maybe others.
Characters like '²', '<' are not recognized in Blender's shortcut keys.
And sometimes simple buttons like {key .} and {key /} on the Windows
keyboard, although the symbol is "known", Blender also doesn't
detect for shortcuts.
For Windows, some of the symbols represented by `VK_OEM_[1-8]` values,
depending on the language, are not mapped by Blender.
On Mac there is a fallback reading the "actual character value of the
'remappable' keys". But sometimes the character is not mapped either.
On Windows, the solution now mimics the Mac and tries to read the button's
character as a fallback.
For unmapped characters ('²', '<', '\''), now another value is chosen as a
substitute.
More "substitutes" may be added over time.
Differential Revision: https://developer.blender.org/D14149
Some logic and comments in the vertex normal calculation were
left over from when normals were stored in MVert, before
cfa53e0fbe. Normals are never allocated and freed
locally anymore.
In some cases, the normal edit modifier calculated the normals on one
mesh with the "ensure" functions, then copied the mesh and retrieved
the layers "for write" on the copy. Since 59343ee162, normal
layers are never copied, and normals are allocated with malloc instead
of calloc, so the mutable memory was uninitialized.
Fix by calculating normals on the correct mesh, and also add a warning
to the "for write" functions in the header.
The check to see if newly requested attributes are not already in the
cache was not taking into account the possibility that we do not have
new requested attributes (`num_requests == 0`). In this case, if
`attr_used` already had attributes, but `attr_requested` is empty, we
would consider the cache as dirty, and needlessly rebuild the attribute
VBOs.
These features are complicated to support on GPU and hardly compatible
with subdivision in the first place. In the future, with T68891 and
T68893, subdivision and custom smooth shading will be separate workflows.
For now, and to better prepare for this future (although long term
plan), we should discourage workflows mixing subdivision and custom
smooth normals, and as such, this disables GPU subdivision when
autosmoothing or custom split normals are used.
This also adds a message in the modifier's UI to indicate that GPU
subdivision will be disabled if autosmooth or custom split normals are
used on the mesh.
Differential Revision: https://developer.blender.org/D14194
Reuse the same vertex normals calculation as for the GPU code, by
weighing each vertex normals by the angle of the edges incident to the
vertex on the face.
Additionally, remove limit normals, as the CPU code does not use them
either, and would also cause different shading issues when limit surface
is used.
Fixes T95242: shade smooth artifacts with edge crease and limit surface
Fixes T94919: subdivision, different shading between CPU and GPU
The custom data code checks for `LayerTypeInfo.defaultname` before
adding a second layer with a certain type. This was missed in
e7912dfa19. In practice, this default name
is not actually used.
Added call to ensure that the USD plugins are registered
when opening a USD cache archive. This is to avoid USD
load errors due to missing USD file format plugins when
opening blender files that contain USD transform cache
constraints and mesh sequence cache modifilers.
Fixes T94396
This operation can only be applied on one ID at a time, so only apply it
to the active Outliner item, and not all the selected ones.
Also renamed `Make Library Override` menu entry to `Make Library Override
Single` to emphasis this is not the 'default expected' option for the
user.
This affects essentially the Outliner 'create hierarchy' tool currenlty.
Previously code did not handle properly hierarchy root in case overrides
where created from a non-root ID (e.g. an object inside of a linked
collection), and in case additional partial overrides were added to an
existing partially overrided hierarchy.
Also did some renaming on the go to avoid using 'reference' in override
context for anything else but the reference linked IDs.
Trust user count to actually delete or not the dragged ID when current
dragging is cancelled, since it may be already used by others.
NOTE: This is more a band-aid fix than anything else, cancelling drag
has a lot of other issues here (like never deleting any indirectly
linked/appended data, etc.). It needs a proper rethink in general.
To keep consistency with the new contract option, the dilate now expand the shape beyond the internal closed area.
Note: This was committed only in master (3.2) by error.
This is requested by artist for some animation styles where is necessary to fill the area, but create a gap between fill and stroke.
Also some code cleanup and fix a bug in dilate for top area.
Reviewed By: pepeland, mendio
Differential Revision: https://developer.blender.org/D14082
Note: This was committed only in master (3.2) by error.
Using flags makes checking multiple modifiers at once more convenient
and avoids macros/functions such as IS_EVENT_MOD & WM_event_modifier_flag
which have been removed. It also simplifies checking if modifier keys
have changed.
This means textures need to have the number of mipmap levels specified
upfront. It does not mean the data is immutable.
There is fallback code for OpenGL < 4.2.
Immutable storage will enables texture views in the future.
Without ray offsets intersections at neigbhoring triangles are found, as
the ray start is exactly at the vertex. There was a small offset towards
the center of the triangle, but not enough.
Now this offset computation is moved into Cycles and modified for better
results. It's still not perfect though like any offset approach, especially
with long thin triangles.
Additionaly, this uses the shadow terminate offset for AO rays now, which
helps remove some pre-existing artifacts.
This is similar to f8fe0e831e, which made the change to the
handle position attributes. This commit removes the way that setting the
`position` attribute also changes the handle position attributes. Now,
the "Set Position" node still has this behavior, but changing the
attribute directly (with the modifier's output attributes) does not.
The previous behavior was a relic of the geometry nodes design
from before fields and the set position node existed.
This makes the transition to the new curves data structure simpler.
There is more room for optimizing the Bezier case of the set position
node in the future.
Also fix a couple other places where normals layers weren't properly
tagged dirty or reallocated when the mesh changes.
Caused by cfa53e0fbe. When the size of a mesh changes,
the normal layers need to be reallocated. There were a couple of places
that cleared other runtime data with `BKE_mesh_runtime_clear_geometry`
but didn't deal with normals properly. Clearing the runtime "geometry"
is different from clearing the normals, because sometimes the size of
the normal layers doesn't have to change, in which case simply tagging
them dirty is fine.
Reverts 6d97fdc37e. A function like this should not return a different
tree-display object than of the requested type. This may hide errors,
and leaves the Outliner in an undefined state (where the stored display
mode doesn't match the tree-display object). I rather don't hide the
fact that all display-modes should be handled here, and emit a clear
error if one isn't.
When X-ray mode is active the selection is done using the mesh data to
select what is closest to the cursor. When GPU subdivision is active with
the "show on cage" modifier option, this fails as the mesh used for selection
is the unsubdivided one.
This creates a subdivision wrapper before running the selection routines to
ensure that subdivision is available on the CPU side as well.
Differential Revision: https://developer.blender.org/D14188
This was a double free error which happened because `BM_mesh_bm_from_me`
was taking ownership of arrays that were still owned by the Mesh. Note that
this only happens when the mesh is empty but some custom data layers still
have a non-null data pointer. While usually the data pointer should be null in
this case for performance reasons, other functions should still be able to
handle this situation.
Differential Revision: https://developer.blender.org/D14181
When exporting generated coordinates, the subdivision export code was
using the schema for the non-subdivision case, which is invalid as
non-initialized. This typo existed since the initial commit for the
feature (rBf9567f6c63e75feaf701fa7b78669b9a436f13dd).
The scale-to-fit option did nothing for single words when
the text box had a height. This happened because it was expected that
text would be wrapped however single words never wrap.
Now the same behavior for zero-height text boxes is used when text
can't be wrapped onto multiple lines.
The handle position attributes `handle_left` and `handle_right` had
rather complex behavior to get expected behavior when aligned or auto/
vector handles were used. In order to simplify the attribtue API and
make the transition to the new curves data structure simpler, this
commit moves that behavior from the attribute to the "Set Handle
Positions" node. When that node is used, the behavior should be the
same as before. However, if the modifier's output attributes were used
to set handle positions, the behavior may be different. That situation
is expected to be very rare though.
This adds a node with a boolean field output which returns true if all of the
points of the evaluated face are on the same plane. A float field input allows
for the threshold of the face/point comparison to be adjusted on a per face basis.
One clear use case is to only triangulate faces that are not planar.
Differential Revision: https://developer.blender.org/D13906
Recently we changed the build pipeline to always create a version
number in the url and point 'dev' to the latest version rather than creating the version number url once we release.
This makes the check to `bpy.app.version_cycle` unnecessary.
tbb/enumerable_thread_specific.h drags in windows.h
which will define min/max macro's unless you politely
ask it not to.
it's bit of an eyesore, but it is what it is
0fd72a98ac called functions to set bezier handle positions
that used uninitialized memory. The fix is to define the handle positions
explicitly, like before.
The main goal here is to add the boilerplate code to make it possible
to add the actual sculpt tools more easily. Both brush implementations
added by this patch are meant to be prototypes which will be removed
or refined in the coming weeks.
Ref T95773.
Differential Revision: https://developer.blender.org/D14180
This adds a node which copies part of a geometry a dynamic number
of times.
Different parts of the geometry can be copied differing amounts
of times, controlled by the amount input field. Geometry can also
be ignored by use of the selection input.
The output geometry contains only the copies created by the node.
if the amount input is set to zero, the output geometry will be
empty. The duplicate index output is an integer index with the copy
number of each duplicate.
Differential Revision: https://developer.blender.org/D13701
Sometimes it is useful to get the index ranges that are in an index mask.
That is because some algorithms can process index ranges more efficiently
than generic index masks.
Extracting ranges from an index mask is relatively efficient, because it is
cheap to check if a span of indices contains a contiguous range.
Drag Action was constantly resetting itself to "move".
Solve this by storing the tool settings per tool and no longer clear
gizmo properties when activating a new tool.
- Reserve "test" for tests & testing frameworks.
- Add "check_mypy" to "make help" text.
- Output to the standard output instead of redirecting to log-files,
leave redirecting output log-files to the user running the command.
The build-bot directly referenced this file and doesn't
have publically available configuration.
Add an empty file until this can be removed by the build scripts.
This will make the transition to the new curves data structure
a bit simple, since the handle types can be copied directly between
the two. The change to CurveEval is simple because it is runtime-only.
Helps with building against different OpenXR SDK versions (i.e. for
downstream builds that require specific versions), as the extension was
only defined since OpenXR 1.0.22.
These were only set in two places. One was related to "tessellated loop
normal", and the other derived corner normals. The values were never
checked though, after 59343ee162. The handling of dirty face
corner normals is clearly problematic, but in the future it should be
handled like the normal layers on the other domains instead.
Ref D14154, T95839
Currently, when normals are calculated for a const mesh, a custom data
layer might be added if it doesn't already exist. Adding a custom data
layer to a mesh is not thread-safe, so this can be a problem in some
situations.
This commit moves derived mesh normals for polygons and
vertices out of `CustomData` to `Mesh_Runtime`. Most of the
hard work for this was already done by rBcfa53e0fbeed7178.
Some changes to logic elsewhere are necessary/helpful:
- No need to call both `BKE_mesh_runtime_clear_cache` and
`BKE_mesh_normals_tag_dirty`, since the former also does the latter.
- Cleanup/simplify mesh conversion and copying since normals are
handled with other runtime data.
Storing these normals like other runtime data clarifies their status
as derived data, meaning custom data moves more towards storing
original/editable data. This means normals won't automatically benefit
from the planned copy-on-write refactor (T95845), so it will have to be
added manually like for the other runtime data.
Differential Revision: https://developer.blender.org/D14154
Allow SCREEN_OT_area_swap to operate between different Blender
windows, and other minor feedback improvements.
See D14135 for more details and demonstrations.
Differential Revision: https://developer.blender.org/D14135
Reviewed by Campbell Barton
Currently the RNA functions to add mesh elements like vertices
don't clear the runtime cache of things like triangulation, BVH
trees, etc. This is important, since they might be accessed with
incorrect sizes. This is split from a fix for T95839.
Atomic operations performed by the C++ standard library might require
libatomic on platforms which do not have hardware support for those
operations.
This change makes it that such configurations are automatically detected
and -latomic is added when needed.
Differential Revision: https://developer.blender.org/D14106
NOTE: This function is currently unused. However, it does use a callback
defined by a few RNA properties through
`RNA_def_property_editable_array_func`, so don't think it should be
removed without further thinking.
This function had two main issues:
* It was doing bitwise AND on potentially three sources of property
flag, when actually used `RNA_property_editable` just use one source
ever.
* It was completely ignoring liboverride cases.
TODO: Deduplicate code between `RNA_property_editable`,
`RNA_property_editable_info` and `RNA_property_editable_index`.
There was accidentally some displacement related code running even when not
using displacement.
Differential Revision: https://developer.blender.org/D14169
Previously, objects and geometries were mapped between frames
using different hash tables in a way that is incompatible with
geometry instances. That is because the geometry mapping happened
without looking at the `persistent_id` of instances, which is not possible
anymore. Now, there is just one mapping that identifies the same
object at multiple points in time.
There are also two new caches for duplicated vbos and textures used for
motion blur. This data has to be duplicated, otherwise it would be freed
when another time step is evaluated. This caching existed before, but is
now a bit more explicit and works for geometry instances as well.
Differential Revision: https://developer.blender.org/D13497
For an upcoming prototype we would introduced a new eTexPaintMode
option. That would add more cases and if statements. This change migrate
the eTexPaintMode to 3 classes. AbstractPaintMode contains a shared interface.
ImagePaintMode for 2d painting and ProjectionPaintMode for 3d painting.
Reset Defaults left the undo stack in an invalid state,
with the active undo step left at the previous state then it should
have been.
Now the buttons own undo logic is used to perform undo pushes.
1. Now handles cyclic strokes correctly.
2. Added a sharp threshold value to allow preservation of sharp corners.
Reviewed By: Antonio Vazquez (antoniov), Aleš Jelovčan (frogstomp)
Ref D14044
1. Now will remove lines if both adjacent faces are back face.
2. Added a check to respect material back face culling setting.
3. Changed label in the modifier to "Force Backface Culling" (which reflect more accurately with what the checkbox does).
Reviewed By: Antonio Vazquez (antoniov), Aleš Jelovčan (frogstomp)
Ref D14041
- No need for `normal_tx` array if we normalize the planes in `plane_tx`.
- No need to calculate the distance squared to a plane (with `dist_signed_squared_to_plane_v3`) if the plane is normalized. `plane_point_side_v3` gets the real distance, accurately, efficiently and also signed.
So normalize the planes of the member `CameraViewFrameData::plane_tx`.
This is a regression partially introduced in rB0a6f428be7f0.
Bones being transformed into edit mode were snapping to themselves.
And the bones of the pose mode weren't even snapping.
(Curious that this was not reported).
Since Python 3.10 is now supported on all platform,
bump the minimum version to reduce the number of Python versions that
need to be supported simultaneously.
Reviewed By: LazyDodo, sybren, mont29, brecht
Ref D13943
This is an alternate fix for T35170 since it caused T44415.
Having the undo system manipulate the key-block coordinates is error
prone as (in the case of T44415) there are situations when it's
important to apply the difference with the original shape key.
This reverts dab0bd9de6, and instead
avoids the problem by not using the data in `Mesh.key` as a reference
for updating shape-keys when exiting edit-mode.
The assumption that the `Mesh.key` in edit-mode won't be modified
until leaving edit-mode isn't always true. Leading to synchronization
errors. (details noted in code-comments).
Resolve this by using shape-key data stored in the BMesh.
Resolving both T35170 & T44415.
Details:
- Remove use of the original vertices when exiting edit mode.
- Remove use of the original shape-key coordinates when exiting
edit-mode (except as a last resort).
- Move shape-key synchronization into a separate function:
`bm_to_mesh_key`.
- Split the synchronization loop into two branches,
depending on the existence of BMesh shape-key coordinates.
- Always write shape-key values back to the BMesh CD_SHAPEKEY layers.
This was only done in some cases but is now necessary for all
shape-keys as these are used to calculate offsets where the `Mesh.key`
was previously used.
- Report a warning when the shape-key layer isn't found as this uses an
imperfect method of restoring coordinates which should only be used as
a last resort.
Reviewed By: mont29
Ref D14127
The problem was when the Object Offset was enabled because the Constant Offset flag was not checked and the offset always was added to the transformation matrix.
Limit the min and max of the IDProperty for the node group input
from 0 to infinity, and the soft min and max between 0 and 1.
Thanks to @PratikPB2123 for investigation.
Instead of accessing the `CD_NORMAL` layer directly,
use the proper API for accessing mesh normals. Even if the
layer exists, the values might be incorrect due to a deformation.
Related to ef0e21f0ae, 969c4a45ce, and T95839.
The flags overlapped ever since normalize was added, so this
requires versioning to copy the flag value. This needs to be
done both in Blender 3.1 and 3.2.
Differential Revision: https://developer.blender.org/D14165
The flags overlapped ever since normalize was added, so this requires
versioning to copy the flag value.
Differential Revision: https://developer.blender.org/D14165
The code was using the same flag value for different modifiers,
resulting in matching the toggle to random overlapping flags.
Differential Revision: https://developer.blender.org/D14165
The constraints solver is now able to handle more cases correctly.
Also the behavior of the boundary fixes is slightly changed if
the constraints thickness mode is used.
Differential Revision: https://developer.blender.org/D14143
The modifier supports arithmetic operations, like Add or Multiply,
but for some reason omits Minimum and Maximum. They are similarly
simple and useful math functions and should be supported.
Differential Revision: https://developer.blender.org/D14164
When RMB-select uses "Select Tweak" as a fallback tool,
ignore all bindings mapped to the Control key as these are
used for path selection.
This was fixed in 2a2d873124
however that caused shift-select to fail (T93100).
The node animation versioning code passes `nullptr` to the `oldName` and
`newName` parameters, but those weren't `NULL`-safe. I added an extra
check for this.
No functional changes, just a crash fix.
Previously, all operators using `PaintStroke` would have to store
the stroke in `op->customdata`. That made it impossible to store
other operator specific data in `op->customdata` that was unrelated
to the stroke.
This patch changes it so that the `PaintStroke` is passed to api
functions as a separate argument, which allows storing the stroke
as a subfield of some other struct in `op->customdata`.
Althought the float buffers are only used as cache, current code paths
don't look at the flags to identify which kind of image it is. Actual
fix would be to check flags, but that wouldn't be something to add one
week before release.
This commit fixes it by removing the buffers after use in the image
engine.
The previous behavior called RNA_enum_item_add a second time,
filled it's contents with invalid values then subtracted totitem,
this caused an unusual reallocation pattern where MEM_recallocN
would run in order to create the dummy item, then again when adding
another itme (reallocating an array of the same size).
Simply memset the array to 0xff instead.
Even though the size of the map was set back to DEFAULT_SIZE_EXP,
the underlying arrays were left unchained. In some cases this caused
further expansions to result in an unusual reallocation pattern
where MEM_reallocN would run expand the entries into an array
that was in fact the same size.
Bug was introduced in D12167.
Reading input size from an input socket is not possible in tiled compositor before execution is initialized. A similar change was done for the base class, see BlurBaseOperation::init_data().
Reviewed by: Jeroen Bakker
Differential Revision: https://developer.blender.org/D14067
This adds maintence overhead and it is not that useful when we have reset to default.
If this is something that we want it should be added dynamically.
Reviewed By: HooglyBoogly, Severin, #user_interface
Differential Revision: https://developer.blender.org/D14151
After using MEM_dupallocN() on the original item/binding, the
user/component path ListBase for the new item/binding needs to be
cleared and each path copied separately.
This commit should suffice to make the shader API agnostic now (given that
all users of it use the GPU API).
This makes the shaders not trigger a false positive error anymore since
the binding slots are now garanteed by the backend and not changed at
after compilation.
This also bundles all uniforms into UBOs. Making them extendable without
limitations of push constants. The generated uniforms from OCIO are not
densely packed in the UBO to avoid complexity. Another approach would be to
use GPU_uniformbuf_create_from_list but this requires converting uniforms
to GPUInputs which is too complex for what it is.
Reviewed by: brecht, jbakker
Differential Revision: https://developer.blender.org/D14123
This commit should suffice to make the shader API agnostic now (given that
all users of it use the GPU API).
This makes the shaders not trigger a false positive error anymore since
the binding slots are now garanteed by the backend and not changed at
after compilation.
This also bundles all uniforms into UBOs. Making them extendable without
limitations of push constants. The generated uniforms from OCIO are not
densely packed in the UBO to avoid complexity. Another approach would be to
use GPU_uniformbuf_create_from_list but this requires converting uniforms
to GPUInputs which is too complex for what it is.
Reviewed by: brecht, jbakker
Differential Revision: https://developer.blender.org/D14123
This removes manual handling of normals that was hard-coded
to false in the one place the function was called. This change
will help to make a fix to T95839 simpler.
It's better not to expose the details of where the dirty flags are
stored to every place that wants to know if the normals are dirty.
Some of these places are relics from before vertex normals were
computed lazily anyway, so this is more of an incrememtal cleanup.
This will make part of the fix for T95839 simpler.
Make relation match material and world nodes. Does not address the reported
issue regarding muted nodes, but another missing update found investigating.
This was an old issue, but recent image partial update changes made this more
likely to happen in some cases. Now ensure that whenever the rendered scene
switches the image is updated.
This patch aims to fix the issues presented in T87829 and T95331,
namely precision issues while connecting two nodes when being too
close together in the node editor editors, in a few cases even
resulting in the complete inability to connect nodes.
Sockets are found by intersecting a padded rect around the cursor
with the nodes' sockets' location. That creates ambiguities, as it's
possible for the padded rect to intersect with the wrong node,
as the distance between two nodes is smaller than the rect is padded.
The fix in this patch is checking against an unpadded rectangle in
visible_node().
Differential Revision: https://developer.blender.org/D14122
The problem was that the code for sorting polygons around a vertex
assumed that it was a manifold or boundary vertex. However in some cases
the vertex could still be nonmanifold causing the crash. The cases where
the sorting fails are now detected and these vertices are then marked as
nonmanifold.
Differential Revision: https://developer.blender.org/D14065
The "Fill Caps" option on the Curve to Mesh node introduced in
rBbc2f4dd8b408ee makes it possible to fill the open ends of the sweep
to create a manifold mesh.
This patch fixes an edge case, where caps were created even when the
rail curve (the curve used in the "Curve" input socket) was cyclic
making the resulting mesh non-manifold.
Differential Revision: https://developer.blender.org/D14124
In ffmpeg 5.0, several variables were made const to try to prevent bad API usage.
Removed some dead code that wasn't used anymore as well.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D14063
Significantly improves loading speed of preview images from disk, e.g. custom
previews loaded using `bpy.utils.previews.ImagePreviewCollection.load()`.
See D14144 for details & comparison videos.
Differential Revision: https://developer.blender.org/D14144
Reviewed by: Bastien Montagne
Currently, whenever any BMesh is converted to a Mesh (except for edit
mode switching), original index (`CD_ORIGINDEX`) layers are added.
This is incorrect, because many operations just convert some Mesh into
a BMesh and then back, but they shouldn't make any assumption about
where their input mesh came from. It might even come from a primitive
in geometry nodes, where there are no original indices at all.
Conceptually, mesh original indices should be filled by the modifier
stack when first creating the evaluated mesh. So that's where they're
moved in this patch. A separate function now fills the indices with their
default (0,1,2,3...) values. The way the mesh wrapper system defers
the BMesh to Mesh conversion makes this a bit less obvious though.
The old behavior is incorrect, but it's also slower, because three
arrays the size of the mesh's vertices, edges, and faces had to be
allocated and filled during the BMesh to Mesh conversion, which just
ends up putting more pressure on the cache. In the many cases where
original indices aren't used, I measured an **8% speedup** for the
conversion (from 76.5ms to 70.7ms).
Generally there is an assumption that BMesh is "original" and Mesh is
"evaluated". After this patch, that assumption isn't quite as strong,
but it still exists for two reasons. First, original indices are added
whenever converting a BMesh "wrapper" to a Mesh. Second, original
indices are not added to the BMesh at the beginning of evaluation,
which assumes that every BMesh in the viewport is original and doesn't
need the mapping.
Differential Revision: https://developer.blender.org/D14018
This commit renames enums related the "Curve" object type and ID type
to add `_LEGACY` to the end. The idea is to make our aspirations clearer
in the code and to avoid ambiguities between `CURVE` and `CURVES`.
Ref T95355
To summarize for the record, the plans are:
- In the short/medium term, replace the `Curve` object data type with
`Curves`
- In the longer term (no immediate plans), use a proper data block for
3D text and surfaces.
Differential Revision: https://developer.blender.org/D14114
Fix boundary error in `BLI_str_unescape_ex`. The `dst_maxncpy` parameter
indicates the maximum buffer size, not the maximum number of characters.
As these are strings, the loop has to stop one byte early to allow space
for the trailing zero byte.
Thanks @mano-wii for the patch!
When removing a node that has a dependence on an ID, like the object
info node, the dependency graph relations weren't updated. This can
cause unexpected performance issues if a complex node tree continues
to depend on an ID that it doesn't actually use anymore. To fix this case,
tag relations for an update if the node has a data-block socket.
Fixes part of T88332
Differential Revision: https://developer.blender.org/D14121
If there is no animation at all, or it's all hidden, the Euler Filter
operators poll now fails with a message that explains this a bit more,
instead of just the generic "context is wrong" error.
Reviewed By: sybren
Maniphest Tasks: T95135
Differential Revision: https://developer.blender.org/D13967
While this should not happen in theory, very bad/broken/dirty files can
lead to such situations.
So we need to re-ensure valid root IDs after resync (for now, done after
each 'library indirect level' pass of resync, this may not be 100%
bulletproof though, time will say).
Found while investigating Blender studio issues in Snow parkour short.
In some cases broken files could lead to selecting a shapekey as
hierarchy root ID, which is not allowed.
Found while investigating Blender studio issues in Snow parkour short.
When new display driver is given to the PathTrace ensure that there are
no GPU resources used from it by the work. This solves graphics interop
descriptors leak.
This aqlso fixes Invalid graphics context in cuGraphicsUnregisterResource
error when doing final render on the display GPU.
Fixes T95837: Regression: GPU memory accumulation in Cycles render
Fixes T95733: Cycles Cuda/Optix error message with multi GPU devices. (Invalid graphics context in cuGraphicsUnregisterResource)
Fixes T95651: GPU error (Invalid graphics context in cuGraphicsUnregisterResource)
Fixes T95631: VRAM is not being freed when rendering (Invalid graphics context in cuGraphicsUnregisterResource)
Fixes T89747: Cycles Render - Textures Disappear then Crashes the Render
Maniphest Tasks: T95837, T95733, T95651, T95631, T89747
Differential Revision: https://developer.blender.org/D14146
Add check for `NULL` `from` pointer to `BLO_main_validate_shapekeys`,
and delete these shapekeys, as they are fully invalid and impossible to
recover.
Found in a studio production file (`animation
test/snow_parkour/shots/0040/0040.lighting.blend`, svn rev `1111`).
Would be nice to know how this was generated too...
This adds initial support for edit mode for the experimental new curves
object. For now we can only toggle in and out of the mode, no real
interraction is possible.
This patch also adds empty menus in edit mode. Those were added mainly
to quiet warnings as the menus are programmatically added to the edit
mode based on the object type and context.
Ref T95769
Reviewed By: JacquesLucke, HooglyBoogly
Maniphest Tasks: T95769
Differential Revision: https://developer.blender.org/D14136
This adds the boilerplate code that is necessary to use the tool/brush/paint
systems in the new sculpt curves mode.
Two temporary dummy tools are part of this patch. They do nothing and
only serve to test the boilerplate. When the first actual tool is added,
those dummy tools will be removed.
Differential Revision: https://developer.blender.org/D14117
Previous implementation had a copy of the image user, which doesn't
contain all the data to identify changes. This patch introduces a new
struct to store the data and can be extended with other data as well
(color spaces, alpha settings).
Check for a camera-view before checking if the view is locked
to the cursor/object since the camera-view takes priority,
it reads better to check that first.
Also reuse the event offset variable.
NDOF navigation in a camera view now behaves like orthographic pan/zoom.
Note that NDOF orbiting out of the camera view has been disabled,
see code comment for details.
Resolves T93666.
For the attribute search button, the tooltip was missing
if the input socket type has attribute toggle activated.
Differential Revision: https://developer.blender.org/D14142
This affected loading of EXR files with set to Linear ACES colorspace, as
well as the sky texture for in some custom OpenColorIO configurations.
Use the builtin OpenColorIO transform from ACES AP0 to XYZ D65 to fix this.
The idea is to keep `is_any_zero` in the `blender::math` namespace,
so instead of trying to be clever, just move it there and expand the
function where it was used in the class.
I noticed that there were a few variables that should not be visible per default.
It seems to me to simply be an oversight, so I went ahead and cleaned them up.
Reviewed By: Sybren, Ray molenkamp
Differential Revision: http://developer.blender.org/D14132
This commit should suffice to make the shader API agnostic now (given that
all users of it use the GPU API).
This makes the shaders not trigger a false positive error anymore since
the binding slots are now garanteed by the backend and not changed at
after compilation.
This also bundles all uniforms into UBOs. Making them extendable without
limitations of push constants. The generated uniforms from OCIO are not
densely packed in the UBO to avoid complexity. Another approach would be to
use GPU_uniformbuf_create_from_list but this requires converting uniforms
to GPUInputs which is too complex for what it is.
Reviewed by: brecht, jbakker
Differential Revision: https://developer.blender.org/D14123
This is a bug on the Blender side, where the depsgraph does not have proper
relations for text object duplis and fails to include the required materials
in the dependency graph. But at least Cycles should not crash.
- No need for `normal_tx` array if we normalize the planes in `plane_tx`.
- No need to calculate the distance squared to a plane (with `dist_signed_squared_to_plane_v3`) if the plane is normalized. `plane_point_side_v3` gets the real distance, accurately, efficiently and also signed.
So normalize the planes of the member `CameraViewFrameData::plane_tx`.
FindOpenImageIO was updated to link to separate OpenImageIO_Util for new
versions, where it is required. For older versions, we can not link to it
because there will be duplicated symbols.
Ref D14128
FindOpenEXR was updated to find new lib names and separate Imath. It's all
added to the list of OpenEXR include dirs and libs.
This keeps it compatible with both version 2 and 3 for now, and doesn't
require changes outside the find module.
Ref D14128
Coarse meshes with high polycount would show as corrupted when GPU
subdivision is used with AMD cards This was caused by the OpenSubdiv
library not taking `GL_MAX_COMPUTE_WORK_GROUP_COUNT` into account when
dispatching computes. AMD drivers tend to set the limit lower than
NVidia ones (2^16 for the former, and 2^32 for the latter, at least
on my machine).
This moves the `GLComputeEvaluator` from the OpenSubdiv library into
`intern/opensubdiv` and modifies it to compute a dispatch size in a
similar way as for the draw code: we split the dispatch size into a 2
dimensional value based on `GL_MAX_COMPUTE_WORK_GROUP_COUNT` and
manually compute an index in the shader.
We could have patched the OpenSubdiv library and sent the fix upstream
(which can still be done), however, moving it to our side allows us to
better control the `GLComputeEvaluator` and in the future remove some
redundant work that it does compared to Blender (see T94644) and
probably prepare the ground for Vulkan support. As a matter of fact,
this patch also removes the OpenGL initialization that OpenSubdiv would
do here. This removal is not related to the bug fix, but necessary to not
have to copy more files/code over.
Differential Revision: https://developer.blender.org/D14131
Previously, the number of action map subactions was limited to two per
action (identified by user_path0, user_path1), however for devices with
more than two user paths (e.g. Vive Tracker) it will be useful to
support a variable amount instead.
For example, a single pose action could then be used to query the
positions of all connected trackers, with each tracker having its own
subaction tracking space.
NOTE: This introduces breaking changes for the XR Python API as follows:
- XrActionMapItem: The new `user_paths` collection property
replaces the `user_path0`/`user_path1` properties.
- XrActionMapBinding: The new `component_paths` collection property
replaces the `component_path0`/`component_path1` properties.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D13949
This fixes VR pink screen issues when using the DirectX backend, caused
by `wglDXRegisterObjectNV()` failing to register the shared
OpenGL-DirectX render buffer. The issue is mainly present on AMD
graphics, however, there have been reports on NVIDIA as well.
A limited workaround for the SteamVR runtime (AMD only) was provided
in rB82ab2c167844, however this patch provides a more complete solution
that should apply to all OpenXR runtimes. For example, with this patch,
the Windows Mixed Reality runtime that exclusively uses DirectX can now
be used with AMD graphics cards.
Implementation-wise, a `GL_TEXTURE_2D` render target is used as a
fallback for the shared OpenGL-DirectX resource in the case that
registering a render buffer (`GL_RENDERBUFFER`) fails. While using a
texture render target may be less optimal than a render buffer, it
enables proper display in VR using the OpenGL/DirectX interop (tested
on AMD Vega 64).
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D14100
After running the breakdown operator for the graph editor,
the factor property in the redo panel didn't reflect the value you chose
to mitigate that issue down the line there is a
new helper function to get the factor value, and
store it at the same time
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D14105
Ref: D14105
Brew's Python framework's site-packages is a symlink so the assumption
that Resources and site-packages would be in the same directory
doesn't hold. So install scripts etc relative to bpy.so. Part of D14111
StringGrid has been deprecated in openvdb 9.0.0 and will be removed soon
Reviewed By: Brecht
Differential Revision: http://developer.blender.org/D14133
The general idea here is to wrap the `CurvesGeometry` DNA struct
with a C++ class that can do most of the heavy lifting for the curve
geometry. Using a C++ class allows easier ways to group methods, easier
const correctness, and code that's more readable and faster to write.
This way, it works much more like a version of `CurveEval` that uses
more efficient attribute storage.
This commit adds the structure of some yet-to-be-implemented code,
the largest thing being mutexes and vectors meant to hold lazily
calculated evaluated positions, tangents, and normals. That part might
change slightly, but it's helpful to be able to see the direction this
commit is aiming in. In particular, the inherently single-threaded
accumulated lengths and Bezier evaluated point offsets might be cached.
Ref T95355
Differential Revision: https://developer.blender.org/D14054
Finding the greatest and/or smallest element in an array is a common
need. This commit refactors the point cloud bounds code added in
6d7dbdbb44 to a more general header in blenlib.
This will allow reusing the algorithm for curves without duplicating it.
Differential Revision: https://developer.blender.org/D14053
This is meant to complement the `blender::math` functions recently
added by D13791. It's sometimes desired to template an operation to work
on vector types, but also basic types like `float` and `int`. This patch
adds that ability with a new `BLI_math_base.hh` header.
The existing vector math header is changed to use the `vec_base` type
more explicitly, to allow the compiler's generic function overload resolution
to determine which implementation of each math function to use.
This is a relatively large change, but it also makes the file significantly
easier to understand by reducing the use of macros.
Differential Revision: https://developer.blender.org/D14113
Fix possible overflow of Modifier UUID
The code prior this change was re-generating modifier's session UUID
prior to copying this id from the source. This approach has a higher
risk of modifiers session UUID to overflow and start colliding with
existing modifiers.
This change makes it so that modifier copy does not re-generated the
session UUID unless it is needed.
Differential Revision: https://developer.blender.org/D14125
GLUT does not support offscreen contexts, which is required for the new
display driver. So we use SDL instead. Note that this requires using a
system SDL package, the Blender precompiled SDL does not include the video
subsystem.
There is currently no text display support, instead info is printed to
the terminal. This would require adding an embedded font and GLSL shaders,
or using GUI library.
Another improvement to be made is supporting OpenColorIO display transforms,
right now we assume Rec.709 scene linear and display.
All OpenGL, GLEW and SDL code was move out of core cycles and into
app/opengl. This serves as a template for apps that want to integrate
Cycles interactive rendering, with a simple OpenGLDisplayDriver example.
In general this would be adapted to the graphics API and color management
used by the app.
Ref T91846
For the 3d texture brush project we need a fast CPU based rasterizer.
This is an initial implementation for a rasterizer that easy to extend
and optimize.
The idea is to implement a rasterizer on top of the ImBuf structure. The
implementation uses CPP templates, resulting each usage to be optimized
by the compiler individually.
A user of the rasterizer can define a vertex shader, fragment shader,
the inputs and interface, similar to existing concepts when using
OpenGL.
The rasterizer only supports triangles.
[Future extensions]
Currently the rasterlines are buffered and when the buffer is full it
will be flushed. This is a tradeoff between local memory and branch
prediction. We expect that adding triangles are typically done by a loop
by the caller. But in certain cases we could buffer the input triangles
and take this responsibility for additional performance.
Configurable clamping. When rasterizing the clamping is done to a corner
of a image pixel. Ideally clamping should consired center pixels or use
a pixel coverage to identify how to clamp during rasterization.
Currently only supports float4 as a fragment output type. float, byte
and int textures aren't supported.
Rasterline discard function. For cases that rasterlines don't need to be
drawn based on vertex data. A use case could be that an influence factor
is 0 for the whole triangle.
Current implementation is single threaded. When using multiple threads
with their own rasterizer could lead to render artifacts. We could
provide a scheduler that collects work in buckets based on the
rasterline y.
[Todos]
* Only supports one winding directional. Should be able to support any
winding direction.
* Use coord as name for the frag position. Current UV is too related to
a specific usecase.
* Add more test cases.
Differential Revision: https://developer.blender.org/D14126
Due to recent changes there have been reports of incorrect loading of
GPU textures. This fix reverts a part of {D13238} that might be the
source of the issue.
This does not happen with **any** image, but with images that have ID
properties.
ID properties are used to store view projection matrices (e.g. for
reprojection with `Image from View` or `Quick Edit` -- these are the
ones we are interested in), but of course they can be used for anything
else, too. The images in the file from the report have ID properties from
an Addon for example.
So the crash can reliably be reproduced with **any** image doing the
following:
```
bpy.data.images['myImage']['myIDprop'] = "foo"
```
This would lead code in `texture_paint_camera_project_exec` to think the
needed `view_data` is on the image (but in reality it was just some
other IDprop).
Solution is simple: just check `view_data` is really valid after getting
it from the IDprops.
Maniphest Tasks: T95787
Differential Revision: https://developer.blender.org/D14116
Having this setting stored in the image space caused low level selection
logic to have to pass around the image space (which could be NULL
in some cases). Use the tool-settings instead since there doesn't seem
to be much/any advantage in having this setting per-space.
Although rB56407432a6a did fix missing subdivision in some cases, in
other cases it did not return the mesh wrapper (like when using
autosmooth, which requires a copy of the mesh), so the non-subdivided
mesh was still returned.
Not all coarse vertices were used to compute the center value (off by
one), and the interpolation for the current would always start at the
base corner for the base face instead of the base corner for the current
patch.
This patch reverses the dependency between `BLI_math_vec_types.hh` and
`BLI_math_vector.hh`. Now the higher level `blender::math` functions
depend on the header that defines the types they work with, rather than
the other way around.
The initial goal was to allow defining an `enable_if` in the types header
and using it in the math header. But I also think this operations to types
dependency is more natural anyway.
This required changing the includes some files used from the type
header to the math implementation header. I took that change a bit
further removing the C vector math header from the C++ header;
I think that helps to make the transition between the two systems
clearer.
Differential Revision: https://developer.blender.org/D14112
This commit renames `mesh_validate.cc` to `mesh_calc_edges.cc`.
I would like to move `mesh_validate.c` to C++, but it makes sense to
keep this specific algorithm in a smaller file.
When running `./blender/build_files/build_environment/install_deps.sh` on Ubuntu 20.04.3 LTS the following error can be seen:
```
./blender/build_files/build_environment/install_deps.sh: line 1266: [: too many arguments
```
This error results from the call:
```
check_package_version_ge_DEB $CLANG_FORMAT $CLANG_FORMAT_VERSION
```
with `CLANG_FORMAT_VERSION` being undefined.
Also as `clang-format` 13 is already released and hopefully didn't break anything `CLANG_FORMAT_VERSION_MEX` could use version bump.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D13924
This adds a new sculpt mode to the experimental new curves object.
Currently, this mode can only be entered and exited, nothing else.
The main initial purpose of this node will be to use it for hair grooming.
The patch also adds the `editors/curves/` directory for the new curves
object, which will be necessary for many other things as well.
I added a completely new mode (`OB_MODE_SCULPT_CURVES`), because
`OB_MODE_SCULPT` seems to be rather specific to meshes, and reusing
it doesn't seem worth the trouble. The tools/brushes used in mesh vs.
curves sculpt mode are quite distinct as well.
I had to add DNA_userdef_enums.h to make the patch compile with C++
(forward declaration of enums isn't allowed). This follows the same
pattern that we use for other enums in dna.
Differential Revision: https://developer.blender.org/D14107
The path calculation method for animation players: frame-cycler, rv &
mplayer would fail when the number of digits exceeded the range of a
32bit int causing RenderData.frame_path() to raise a ValueError.
Use a simpler method of extracting the range that uses the sign to
detect the beginning of the number.
Since the output file stays unmodified for most developer builds,
install step installed it redundantly.
Create readme.html using `configure_file`:
- Now it's modified only if final output changes (handled by CMake).
- If input file (from git) or blender version changes,
it //will// be modified.
Also don't re-implement what CMake can do.
Reviewed By: campbellbarton, LazyDodo
Differential Revision: https://developer.blender.org/D13863
- Increment the argument index at the end of the loop.
Otherwise using the index after incrementing required subtracting 1.
- Move error prefix creation into a function: `pyrna_func_error_prefix`
so it's possible to create an error prefix without duplicate code.
This simplifies further changes for argument parsing from D14047.
Set "view2d_edge_pan" to true for the NODE_OT_translate_attach operator,
which is used by the duplication operator. This is done in the keymap so
that it's not hard-coded.
Differential Revision: https://developer.blender.org/D13934
The root issue was caused by a mistake in modifier copy data which was
wrongly re-generating source modifier data identifier.
The c8cca88851 simply exposed a bug in code which always was there
since the modifiers session UUID was introduced.
Shows an importance of const qualifier :)
Since now we delegate the evaluation of the last subsurf modifier in the stack
to the draw code, Cycles does not get a subdivided mesh anymore. This is because
the subdivision wrapper for generating a CPU side subdivision is never created
as it is only ever created via `BKE_object_get_evaluated_mesh` which Cycles does
not call (rather, it accesses the Mesh either via `object.data()`, or via
`object.to_mesh()`).
This ensures that a subdivision wrapper is created when accessing the object data
or converting an Object to a Mesh via the RNA/Python API.
Reviewed by: brecht
Differential Revision: https://developer.blender.org/D14048
This is requested by artist for some animation styles where is necessary to fill the area, but create a gap between fill and stroke.
Also some code cleanup and fix a bug in dilate for top area.
Reviewed By: pepeland, mendio
Differential Revision: https://developer.blender.org/D14082
The crash is caused as we did not check that the RNA pointer is null
before trying to use it. This moves the existing checks from the
modifier panels into the template functions so the logic is a bit
centralized.
The issue has two causes: on one hand origin indices were not handled
properly, on the other hand the extraction type (Mesh, BMesh, or mapped)
was not detected correctly.
For the second case reuse the MeshRenderData creation from the coarse
code path so that we make the same decisions. Loose geometry extraction
had to be updated to properly handle the BMesh cases.
For the origin indices, in some cases (for edges and faces), the arrays
used by the subdivision code already have the origin indices baked into
them, so mapping them a second time through the origin index layer is
wrong, and could cause out of bounds accesses.
For vertices especially, we would use two arrays: one for mapping
subdivision vertices to coarse vertices, and another one to map coarse
vertices to subdivision loops used for the selection index buffer. The
second one is now removed (which saves a bit of memory) as it is did not
have the proper data setup for use with the origin indices and we can
easily compute it using the first array anyway.
Fix segfault when calling `some_id.id_properties_ui("propname").update()`,
i.e. call the `update()` function without any keyword arguments. In such
a case, Python passes `kwargs = NULL`, but `PyDict_Contains()` is not
`NULL`-safe.
The Viewer marked the gpu texture to be out of date. But it should have used
the mark_full_update as the gpu textures
are only used by the render/draw engines.
The image/node editor uses the image engine that have its own GPU textures.
Currently one a single texture slot is used to update the screen.
Current design is implemented to use multiple textures.
for now limit the number of texture slots to 1.
This node is a bit of a weird case, because it uses the value stored in an
output socket as an input. So when we want to determine if the Dot
changed, we also have to check if the Normal output changed.
A cleaner solution would be to refactor this by either storing the normal
on the node directly (instead of in an output socket), or by exposing it
by a separate input. This refactor should be done separately though.
Currently whenever gl queries are performed for the viewport, a large
1024 byte array is allocated to store the query results (256 of them).
Unfortunately, if any gizmo using a `draw_select` callback is active
(e.g. the transform gizmos), these queries (and allocations) will occur
during every mouse move event.
Change the vector to allow for up to 16 query results before making an
allocation. This provides enough space for every built-in gizmo except
Scale Cage (which needs 27 queries). It also removes unnecessary
allocations from two other related vectors used during query processing.
Differential Revision: https://developer.blender.org/D13784
This is a regression partially introduced in rB0a6f428be7f0.
Bones being transformed into edit mode were snapping to themselves.
And the bones of the pose mode weren't even snapping.
(Curious that this was not reported).
This fix avoid the drif checking if the previous position is equals to new one, in this case, the pen has not moved and can be canceled.
Differential Revision: https://developer.blender.org/D13870
The animation playback did not take into account individual stereoscopic views.
This patch fixes this by playing back the active view render.
Reviewed By: campbellbarton
Maniphest Tasks: T91423
Differential Revision: https://developer.blender.org/D14070
Workaround for a compilation issue preventing kernels compiling for AMD GPUs: Avoid problematic use of templates on Metal by making `gpu_parallel_active_index_array` a wrapper macro, and moving `blocksize` to be a macro parameter.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D14081
A zero length vector was normalized and the resulting NaN used in further calculations.
This caused trouble on some compilers when using fast math.
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D14058
* Apple Silicon support enabled on macOS 12.2+
* AMD support enabled on macOS 12.3+
This patch also fixes a device enumeration crash on certain AMD configs which
was caused by over-release of MTLDevice objects.
Differential Revision: https://developer.blender.org/D14090
Improve the nodes' drop shadow by making it scale with the view
and replace the loop for the alpha calculation with something more
explicit.
The amount of drop shadow softness was scaled with the zoom level
and therefore had a fixed screen space size. DPI and UI scale
weren't taken into account either. This patch fixes both issues by
basing the shadow softness on the `widget_unit` that scales correctly
in zoomable views and takes UI scale etc. into account.
Differential Revision: https://developer.blender.org/D13356
* Replace license text in headers with SPDX identifiers.
* Remove specific license info from outdated readme.txt, instead leave details
to the source files.
* Add list of SPDX license identifiers used, and corresponding license texts.
* Update copyright dates while we're at it.
Ref D14069, T95597
Drivers make it way too easy to create dependenciy loops between IDs, so
need to use the same trick as in other dependency-following code in this
file to prevent those infinite loops.
hard to predict for sure how bad of a hierarchy root this can end up
producing, but in general cases think this should be OK.
The rbit instruction is only available starting with ARMv6T2 and
the register prefix is different from what AARCH64 uses.
Separate the 32 and 64 bit ARM branches, add missing ISA checks.
Made sure the code works as intended on macMini with Apple silicon,
and on Raspberry Pi 4 B running 32bit Raspbian OS.
Differential Revision: https://developer.blender.org/D14056
Reduce compute effort of liboverrides resync process by only re-syncing
the parts of the override hierarchy that actually need it.
The main change compared to existing code (which was systematically resyncing
a whole override hierarchy), is that resyncing now operates over several
sub-hierarchies at once, each defined by their own 'resync root' ID.
This ensures that we do not get several new overrides for the same data inside
of the same hierarchy.
Implements T95682.
Differential Revision: https://developer.blender.org/D14079
This patch increases the performance when remapping data.
{D13615} introduced a mechanism to remap multiple items in a single go.
This patch uses the same mechanism when remapping data inside ID datablocks.
Benchmark results when loading the village scene of sprite fright on AMD Ryzen 7 3800X 8-Core Processor
Before this patch 115 seconds
When patch applied less than 43 seconds
There is still some room for improvement by porting relink code.
Reviewed By: mont29
Maniphest Tasks: T95279
Differential Revision: https://developer.blender.org/D14043
Adds helper functions to debug IDRemapper data structure.
`BKE_id_remapper_result_string` converst a given IDRemapperApplyResult
to a readable form for logging purposes.
`BKE_id_remapper_print` prints out the rules inside a IDRemapper struct.
Instead of creating and destroying threads when starting and stopping renders,
keep a single thread alive for the duration of the session. This makes it so all
display driver OpenGL resource allocation and destruction can happen in the same
thread.
This was implemented as part of trying to solve another bug, but it did not
help. Still I prefer this behavior, to eliminate potential future issues wit
graphics drivers or with future Cycles display driver implementations.
Differential Revision: https://developer.blender.org/D14086
For reasons unclear, destroying and then recreating a vertex buffer in the
render OpenGL context is affecting the immediate mode vertex buffer in the
draw manager OpenGL context.
Instead just create a single vertex buffer and use it for the lifetime of
the render OpenGL context. There's not really any need to have a separate
one per tile as far as I can tell.
Differential Revision: https://developer.blender.org/D14084
This adds support for exporting attributes from a Blender Curves object to Cycles.
The implementation follows that of the Mesh object. This also creates motion blur
data if the "velocity" attribute is present on the Curves.
Ref T94193
Reviewed By: brecht
Maniphest Tasks: T94193
Differential Revision: https://developer.blender.org/D14088
Due to the freeing and re-creation of textures performed when binding
offscreen viewports, VR viewport textures would be needlessly
re-created every drawing iteration, leading to a negative impact on VR
frame rate.
This was brought to light by 6738ecb64e, which introduced an
additional texture clear operation on initialization and was
prohibitively costly on some systems when performed every frame.
Now, the textures for VR viewports will not be always re-created
during offscreen binding, but only when necessary using a pre-drawing
step (`wm_xr_session_surface_offscreen_ensure()`).
Reviewed By: jbakker, fclem
Differential Revision: https://developer.blender.org/D14059
When using a RGBA16 (`GL_RGBA16`, `DXGI_FORMAT_R16G16B16A16_UNORM`)
swapchain format with Quest 2, no image is presented to the headset.
This can occur when using the SteamVR runtime with an AMD graphics card
(ex. T95374).
Workaround is to move this format after the Quest 2-compatible RGBA16F
formats in the candidates list so that the RGBA16F formats are chosen
instead.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D14024
Crash was caused since the function pointers
`s_xrGetOpenGLGraphicsRequirementsKHR_fn`/
`s_xrGetD3D11GraphicsRequirementsKHR_fn` were static and were not
updated with the correct proc address after being set the first time.
As stated in the OpenXR spec: "function pointers returned by
xrGetInstanceProcAddr using one XrInstance may not be valid when used
with objects related to a different XrInstance".
Although it would seem reasonable that the proc address would not
change if the instance was the same (hence the `static XrInstance s_instance;`),
in testing, repeated calls to `xrGetInstanceProcAddress()`
with the same instance still can result in changes (at least for the
SteamVR runtime) so the workaround is to simply set the function pointers
every time, essentially trivializing their `static` designations.
Reviewed By: Severin
Maniphest Tasks: T94268
Differential Revision: https://developer.blender.org/D14023
For the majority of node groups created in Blender 3.0 the behavior does not change.
So far we only found a single file where this setting has an effect.
Differential Revision: https://developer.blender.org/D14078
For an upcoming project we would want to match multiple id types in a
single go. To not replicate the implementation using other types we
introduce `BKE_library_id_can_use_filter_id` that returns all supported
types as a filter.
Not all ID types have a filter_id (ID_LI, ID_KE, ID_SCR) These
exceptions are not available in the filter_id function.
Reviewed By: mont29
Maniphest Tasks: T95279
Differential Revision: https://developer.blender.org/D14061
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
Complex Solidify creates edge bevel weights on the rim if the
according vertex has some vertex bevel weight. If there are no
edge bevel weights, they were left disabled even if vertex bevel
weights are used.
Some curve objects don't have an evaluated mesh at all, but line art
currently assumes that all curve objects have one before converting
it to a mesh internally. Fix this by checking if the curve object has an
evaluated mesh before skipping it.
The remaining problem is that evalauted from non-mesh objects or
evaluated curves from non-curve objects, etc. will be ignored if
"Allow Duplicates" is off. That's a different problem though.
Differential Revision: https://developer.blender.org/D14036
For curve-heavy scenes, memory consumption regressed when we switched from MetalRT to bvh2. Allow users to opt in to MetalRT to workaround this.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D14071
Disable binary archives on Apple Silicon (issue stems from instancing multiple PSOs from the same binary archive). Pipeline creation still filters through the OS shader cache, mitigating any impact on setup times after the initial render.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D14072
This is part of the project of converting `MVert` into `float3`.
(more details in T93602), The pbvh update flag is removed and
replaced with a bitmap stored in the PBVH structure. This
patch is similar to D13878. This is mainly setup for an eventual
performance improvement by removing the extra data from
mesh vertices, but if it's consistent with testing in the other patch
doing the same thing for another "temp tag", then it may actually
increase the speed of sculpt code slightly, since less memory needs
to be loaded when checking/changing the flags.
Differential Revision: https://developer.blender.org/D14000
The main issue is that the image and image user is not updated correctly
in `rna_ImageUser_update`. `BKE_image_user_frame_calc` does not set the
correct frame, because the image is null. Also `IMA_GPU_REFRESH` is not
set for the same reason.
When gpu materials are first created, it is expected that the frame is set
correctly, and the flag is set if necessary. Therefore, somewhere during
depsgraph evaluation, those have to be updated. The depsgraph node
to do the update existed already. Now there is a new relation so that it is
executed when the node tree changed, not only when the frame changed.
This is partially caused by a stupid mistake in cfa53e0fbe
where I missed initializing the `vert_normals` pointer in
`MResolvePixelData`. It's also caused by questionable assumptions
from DerivedMesh code that vertex normals would be valid.
The fix used here is to create a temporary mesh with the data necessary
to compute vertex normals, and ensure them here. This is used because
normal calculation is only implemented for `Mesh` and edit mesh, not
`DerivedMesh`. While this might not be great for performance, it's
potentially aligned with future refactoring of this code to remove
`DerivedMesh` completely. Since this is one of the last places the data
structure is used, that would be a great improvement.
Differential Revision: https://developer.blender.org/D13960
While applying liboverrides on linked data, RNA code (in
`rna_property_override_check_resync`) would detect a lot of false positive
regarding IDs needing resync, because the temporary ID used to apply
overrides was always local, breaking the libraries comparison check.
NOTE: that whole 'apply liboverrides' code could use some refreshment,
it did not change much from initila version several years ago, we now
have better tools and control over non-main data.
But for now the 'trick' in that commit should do the job, ultimately
those temps IDs should never be put in Main at all.
The crash was happening when the mesh had loose edges.
Loose edges are not part of OpenSubdiv topology and hence should not be
communicated to the refiner. Pass ta boolean flag indicating whether an
edge is loose or not in the mesh foreach routines, which seems to be
the easiest way.
Decouple the reference (linked) root ID and the hierarchy (override) root ID.
Previous code was assuming that the reference ID was always also tagged
for override creation, which is true in current master, but cannot be
assumed in general (and won't be true with partial resync anymore).
Also add asserts to validate conditions that the reference/hierarchy_root
variables must meet.
There are two things achieved by this change:
- No possible downcast of size_t to int when calculating motion steps.
- Disambiguate call to `min()` which was for some reason considered
ambiguous on 32bit platforms `min(int, unsigned int)`.
- Do the same for the `max()` call to keep them symmetrical.
On an implementation side the `min()` is defined for a fixed width
integer type to disambiguate uint from size_t on 32bit platforms,
and yet be able to use it for 32bit operands on 64bit platforms without
upcast.
This ended up in a bit bigger change as the conditional compile-in of
functions is easiest if the functions is templated. Making the functions
templated required to remove the other source of ambiguity which is
`algorithm.h` which was pulling min/max from std.
Now it is the `math.h` which is the source of truth for min/max.
It was only one place which was relying on `algorithm.h` for these
functions, hence the choice of `math.h` as the safest and least
intrusive.
Fixes 32bit platforms (such as i386) in Debian package build system.
Differential Revision: https://developer.blender.org/D14062
This implements the update cache described in T95401.
The cache is currently only used for drawing strokes and
sculpting (using the push brush).
**Note: Making use of the cache throughout grease pencil will
have to be done incrementally in other patches. **
The update cache stores what elements have changed in the
original data-block since the last time the eval object
was updated. Additionally, the update cache can store multiple
updates to the data and minimizes the number of elements
that need to be copied.
Elements can be tagged using `BKE_gpencil_tag_full_update` and
`BKE_gpencil_tag_light_update`. A full update means that the element
itself will be copied but also all of the content inside. E.g. when a
layer is tagged for a full update, the layer, all the frames inside the
layer and all the strokes inside the frames will be copied.
A light update means that only the properties of the element are copied
without any of the content. E.g. if a layer is tagged with a light
update, it will copy the layer name, opacity, transform, etc.
When the update cache is in use (e.g. elements have been tagged) then
the depsgraph will not trigger a copy-on-write, but an update-on-write.
This means that the update cache will be used to determine what elements
have changed and then only those elements will be copied over to the
eval object.
If the update cache is empty or the data block was tagged with a full
update, we always fall back to a copy-on-write.
Currently, the update cache is only used by the active depsgraph. This
is because we need to free the update cache after an update-on-write so
it's reset and we need to make sure it is not freed or read by other
depsgraphs.
Co-authored-by: @yann-lty
This patch was contributed by The SPA Studios.
Reviewed By: sergey, antoniov, #dependency_graph, pepeland, mendio
Maniphest Tasks: T95401
Differential Revision: https://developer.blender.org/D13984
Simple upgrade of OpenXR to 1.0.22, following the steps from
https://wiki.blender.org/wiki/Source/OpenXR_SDK_Dependency and
rBb69ab42982a1. No changes to Blender code were necessary, only a version
bump.
The primary motivation for this upgrade is to utilize the
`XR_HTCX_vive_tracker_interaction` extension introduced in ver. 1.0.20.
However, the latest release (1.0.22) also adds a number of potentially
useful extensions such as:
- `XR_FB_render_model`
- `XR_HTC_facial_expression`
- `XR_HTC_vive_focus3_controller_interaction`
Ref T95206
Reviewed By: LazyDodo, sybren, mont29
Maniphest Tasks: T95206
Differential Revision: https://developer.blender.org/D13950
Turn off "Sync Length" when splitting an NLA strip.
The NLA Strip-Action Clip has a setting called "Sync Length" that is on
by default and helps to update the length of the clip to the current
actions keyframes so the strip shows the entire actions stored
animation.
When you split one of these strip-action clips in the NLA to trim it
shorter or to move it somewhere else in the NLA tracks to blend or work
with, the "Sync Length" setting stays checked on. You can have many
strips in the NLA that all look to the same action, if you split one
strip , you now have two strips showing or linked to the same action.
To see or edit keyframes on a strip, you enter tweak mode. When you exit
tweak mode, if "Sync Length" is active on the strip-action clip
settings, the strip length is changed/reset to match the action keys.
When you have many clips, this causes all of them to evaluate and update
no matter where they are in the NLA. This destroys/undoes all the user
work to trim down and place the clips in the NLA.
**Description of the proposed solution:**
This patch/change would turn off, the "Sync Length" setting when the
split tool was used on a strip/action clip to help protect the users
choice to trim and keep the clip that length. It doesn't change the
ability to turn the setting back on or off, it just makes sure that the
user doesn't accidentally or unknowingly loose work.
The same process happens when an action is created that has a "manual
range" set that is different than the length of the actions start-end
keyframes. It makes sense to do the same thing for the split tool.
**Alternative solutions:**
While the user could know this and turn off this setting by hand, it is
easy to forget and or the user might think that it only happened to the
one clip they were editing and not realize it happened to all the
trimmed versions, changing the users choice without the user knowing it
happened.
**Limitations of the proposed solution:**
It only fixes the split tool, if another tool was created and some how
impacted the clip length we would need to have that tool also take the
sync length into account.
Reviewed By: sybren
Maniphest Tasks: T84486
Differential Revision: https://developer.blender.org/D10168
From a strict language point of view the code required a braces around
`trgba` initialization. But it is easier to rely on the fact that fields
which are not specified are zero-initialized.
Under some circumstances, simply adding a curve object and going
to edit mode would cause a crash. This is because the evaluated
`CurveEval` was accessed but also freed by the dependency graph.
The fix reverts the part of b76918717d that uses the
`CurveEval` for the curve object bounds. While this isn't ideal,
it was the previous behavior, and some unexpected behavior
with object bounds is much better than a crash. Plus, given the plans
of using the new "Curves" data-block for evaluated curves, this
situation will change relatively soon anyway.
Strip aligning wasn't done when length of 2 strip is equal, but since
these strips are aligned according to position in stream this can
produce offset.
There are two things achieved by this change:
- No possible downcast of size_t to int when calculating motion steps.
- Disambiguate call to min() which was for some reason considered
ambiguous on 32bit platforms `min(int, unsigned int)`.
On an implementation side the `min()` is defined for a fixed width
integer type to disambiguate uint from size_t on 32bit platforms,
and yet be able to use it for 32bit operands on 64bit platforms without
upcast.
Fixes 32bit platforms (such as i386) in Debian package build system.
Differential Revision: https://developer.blender.org/D13992
Added a new "Sharpen Less" kernel to the filter compositor node. The intent here is to provide a much less aggressive sharpening filter that can't simply be solved by toning down the factor on the existing sharpen filter.
The existing "Sharpen" filter uses a "box" kernel:
```
-1 -1 -1
-1 9 -1
-1 -1 -1
```
The new "Sharpen Less" filter uses a "diamond" kernel:
```
0 -1 0
-1 5 -1
0 -1 0
```
The difference between the two is clear to see in the following side-by-side:
{F12847431}
Below shows the difference between the filtering kernels as applied to a B&W render of Suzanne with the UV grid as a texture. The left side of the render using the existing "Sharpen" filter, and the right side showing the new "Sharpen Less" filter. Notice that the left side is more aggressive in accentuating localized contrasts across the image. This can lead to what appears to be aliasing or striations in the resulting image:
{F12847429}
https://developer.blender.org/T95275https://blender.community/c/rightclickselect/57Kq/?sorting=hot
{F12847428}
Reviewed By: #compositing, jbakker
Differential Revision: https://developer.blender.org/D14019
This is almost always meaningless as most code has changed
since the comment was added. Besides this, version control can be used
to check if/when a file was modified.
Some cases of this were kept when they contain details
about the original copyright holder.
Order copyright immediately after the license block,
this was done almost everywhere with a few exceptions.
Remove authors from a few files (we had already removed "Contributors"
section however with old patches being applied this gets added back in).
Also move descriptive text into the doxygen comment block under \file.
In some cases remove the text as it was accidentally copied.
GHOST_ISystem::toggleConsole had a somewhat misleading name
it could be fed 4 different values, so it was not as much a
toggle as a set console window state.
This change renames `toggleConsole` to a more appropriately
named `setConsoleWindowState` and replaces the integer it had
to an enum so it's easy to tell what is being asked of it at
the call site.
Reviewed By: LazyDodo
Differential Revision: https://developer.blender.org/D14020
Symmetrize Armature now also symmetrizes the transform of custom bone
shapes.
Adds a new property to `bpy.ops.armature.symmetrize`:
//Parameters//:
- **direction **(enum in ['NEGATIVE_X', 'POSITIVE_X'], (optional)) –
**Direction**, Which sides to copy from and to (when both are selected)
- **custom_shape **(enum in ['SYMMETRIZE_SAME', 'SYMMETRIZE_ALL',
'SYMMETRIZE_NONE'], (optional)) – **Custom Shapes**, Wether to
symmetrize non symmetric custom bone shapes, all custom shapes, or
none at all
//Rationale//:
Reviewed By: #animation_rigging, Mets, sybren
Maniphest Tasks: T91871
Differential Revision: https://developer.blender.org/D13416
Add files with extension ".woff" and ".woff2" to FILE_TYPE_FTFONT
file type. Allows selecting and using these types of font files.
See D13822 for more details.
Differential Revision: https://developer.blender.org/D13822
Reviewed by Campbell Barton
Avoid using the uint64_t as an intermediate cast since it complicates
behavior for signed types (which first need to be cast to an int64_t).
Assign both old_value_i & old_value_f from the original value to avoid
the need for different handling of signed/unsigned types.
Reviewed By: JacquesLucke
Ref D14039
A Bump node without a Height input is meaningless and does nothing.
As such, it is available as an old workaround that allows making Node
Group inputs that default to normal when not connected, by routing
via a no-op Bump node before doing math.
Cycles specifically recognizes this use case and either bypasses
the node, or converts it into a Geometry Normal node, but Eevee
was still evaluating it as usual. That incurred performance cost,
and also normalized the vector unlike Cycles.
This implements the same bypass logic for Eevee. Since I'm not
sure if it's possible to totally remove the node at this stage,
it emits a no-op function call to copy the input vector.
Differential Revision: https://developer.blender.org/D14045
Viewport cull bones during selection to avoid depth-picking
reading the depth buffer for bones that aren't in the viewport.
Files with thousands of bones could hang blender for seconds while
selecting. The issue could still happen with overlapping bones or when
zoomed out so all bones are under the cursor, however in practice this
rarely happens.
Now files with many bones select quickly.
Related changes include:
- Split `BKE_pchan_minmax` out of `BKE_pose_minmax`.
- Add `mat3_to_size_max_axis` to return the length of the largest
axis (used for scaling the radius).
Reviewed By: sybren
Maniphest Tasks: T91253
Ref D13990
This new info simplifies greatly the handling of resync and deleting
liboverride hierarchies, and makes those operations more robust to
complex dependencies cases between different hierarchies.
Related to T95283.
This change will make handling of liboverrides hierarchies (especially
resyncing) much easier and efficient. It should also make it more
resilient to 'degenerate' cases, and allow proper support of things like
parenting an override to another override of the same linked data (e.g.
a override character parented to another override of the same
character).
NOTE: this commit only implements minimal changes to add that data and
generate it for existing files on load. Actual refactor of resync code
to take advantage of this new info will happen separately.
This change will make handling of liboverrides hierarchies (especially
resyncing) much easier and efficient. It should also make it more
resilient to 'degenerate' cases, and allow proper support of things like
parenting an override to another override of the same linked data (e.g.
a override character parented to another override of the same
character).
NOTE: this commit only implements minimal changes to add that data and
generate it for existing files on load. Actual refactor of resync code
to take advantage of this new info will happen separately.
Previously, node selection made no distinction between a frame node and
other nodes. So a frame node would be selected by their whole rect or
center (depending on box/lasso/circle select). As a consequence of this,
box and lasso could not pratically be started inside a frame node (with
the intention to select a subset of contained child nodes) because the
frame would be selected immediately and tweak-transforming started.
Circle selecting would always contain the frame node as well (making
transforming a subset of nodes without also transforming the whole frame
impossible).
Now change selection behavior so that for all selection modes only the
border [the margin area that is automatically added around all nodes,
see note below] of a frame node is considered in selection. This makes
for a much more intuitive experience when arranging nodes inside frames.
note: to make the area of interest for selection/moving more obvious,
the cursor changes when hovering over (as is done for resizing).
note: this also makes the resize margin consistent with other nodes.
note: this also fixes right resize border (was exclusive instead of
inclusive as every other border)
Also fixes T46540.
This adds an option to the "Select Similar" operator in edit mode to
select vertices based on vertex crease similarity. The implementation
follows that of the edge crease, with a 1-dimensional KD-tree used to
store and retrieve vertex indices base on crease values.
To maintain compatibility with old files (scripts), the `SIMEDGE_CREASE`
enumeration identifier remains `CREASE`, while the one for the new
`SIMVERT_CREASE` is `VCREASE` to follow the naming convention of other
enum values.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D14037
This Diff changes the computation of the input and output socket
position to being always aligned with its corresponding label.
Reviewed By: campbellbarton
Ref D14025
Regression in 51befa4108
caused negative values to overflow into a uint64_t.
Resolve by casting to a signed int from originally signed types.
This caused D14033 not to work properly.
Assign the actual value before casting to large uint64_t/double types.
This improves readability, especially in cases where both pointer
and integer casts were used in one expression, to make matters worse
clang-format treated these casts as a multiplication.
This also made debugging/printing the values more of a hassle.
No functional changes (GCC produced identical output).
Account for `CurveEval`, which stores the proper deformed and
procedurally created data, unlike the `nurb` list, which has always
just meant a copy of the original curve.
Also account for the case when the curve is empty by using a -1, 1,
fallback bounding box in that case, just like mesh objects.
The problem was that nullptr was returned which is a valid value for
Mesh * and hence the returned optional was treated as having some value.
There was no check for point clouds so that was fixed as well.
Differential Revision: https://developer.blender.org/D14026
Based on discussions from T95355 and T94193, the plan is to use
the name "Curves" to describe the data-block container for multiple
curves. Eventually this will replace the existing "Curve" data-block.
However, it will be a while before the curve data-block can be replaced
so in order to distinguish the two curve types in the UI, "Hair Curves"
will be used, but eventually changed back to "Curves".
This patch renames "hair-related" files, functions, types, and variable
names to this convention. A deep rename is preferred to keep code
consistent and to avoid any "hair" terminology from leaking, since the
new data-block is meant for all curve types, not just hair use cases.
The downside of this naming is that the difference between "Curve"
and "Curves" has become important. That was considered during
design discussons and deemed acceptable, especially given the
non-permanent nature of the somewhat common conflict.
Some points of interest:
- All DNA compatibility is lost, just like rBf59767ff9729.
- I renamed `ID_HA` to `ID_CV` so there is no complete mismatch.
- `hair_curves` is used where necessary to distinguish from the
existing "curves" plural.
- I didn't rename any of the cycles/rendering code function names,
since that is also used by the old hair particle system.
Differential Revision: https://developer.blender.org/D14007
This patch makes it possible to set the UI color of a node's
header bar and override the default from the node's typeinfo.
Currently the color is taken from the `.nclass`
member of the node's bNodeType->TypeInfo struct.
This is created once when registering the node.
The TypeInfo is used for both UI and non-UI functionality.
Since the TypeInfo is shared, the header bar for the node
can't be changed without changing all nodes of that type.
The Map Range node is shown as a `Converter` or blue color by default.
This patch allows this to be changed dynamically to `Vector` or purple.
This is done by adding a `ui_class` callback to node typeinfo struct.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D13936
If the console was hidden on windows, it would
be made visible during shutdown in an effort
not hide a potentially active interactive console
session. This however did not take in account
if blender was actually launched from an interactive
console causing the console window to briefly flash
during shutdown even when launched from the new
launcher, the brief flash concerned some users.
This change adjusts the behaviour to restore the
console only when blender was started from the
console.
Reviewed By: LazyDodo
Differential Revision: https://developer.blender.org/D14016
If the "Asset Indexing" option was disabled in Preferences > Experimental
> Debugging, the asset-view template (used by pose libraries for
example) would still use the indexing.
Previously, nearest interpolation filter was used for preview, because
it offered good performance and bilinear was used for rendering. This
is not always desirable behavior, so filter method can now be chosen by
user. Chosen method will be used for preview and for rendering.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D12807
Dashed line display was changed since 2.7x, using white on black
instead of grey on black.
This made selection difficult to see as white is brighter
than the default selected color.
Match the grey used in 2.7x.
This patch from Henrik Dick improves the continuity between the
grid forming corners and the edge polyons on multisegment bevels.
For details, see patch D13867.
Fixes T95384. New exporter was missing a fix for T94516 that recently got applied to the python exporter.
Also changed the obj export tests code so that when save_failing_test_output is requested and MTL result is different from the golden expectation, it is saved as well, similar to how it's done for the OBJ file result.
This change from Aras further parallelizes wihin large meshes (the previous one
just parallelized over objects).
Some stats: on A Windows machine, AMD Ryzen (32 threads):
(one mesh) Monkey subdivided to level 6: 4.9s -> 1.2s (blender 3.1 was 6.3s; 3.0 was 49.4s).
(one mesh) "Rungholt" minecraft level: 8.5s -> 2.9s (3.1 was 10.5s; 3.0 was 73.7s).
(lots of meshes) Blender 3 splash: 6.2s -> 5.2s (3.1 was 48.9s; 3.0 was 392.3s).
On a Linux machine (Threadripper, 48 threads, writing to SSD):
Monkey - 5.08s -> 1.18s (4.2x speedup)
Rungholt - 9.52s -> 3.22s (2.95x speedup)
Blender 3 splash - 5.91s -> 4.61s (1.28x speedup)
For details see patch D14028.
Caused by rBf75449b5f2b04b79, which was missing a null check when
attempting to extract a `CustomData` pointer from an mesh that might
be null if the object isn't a mesh object. The commit added null checks
elsewhere, so simply adding them here is a straightforward fix.
Fixes T95526, T95539
Also fixed conflicts due to the change in file writing in the new obj exporter
in master, and fixed one of the tests that was added in master but not 3.1.
The new wavefront .obj exporter in 3.1 was producing slightly invalid parm line syntax (missing u), and was not setting first/last N params to zeroes and ones for curves with "endpoint" flag properly.
Removes unnecessary calls to blf_glyph_cache_find, simplifies
blf_font_size, and reduces calls to it. blf_glyph_cache_new
and blf_glyph_cache_find made static.
See D13374 for more details.
Differential Revision: https://developer.blender.org/D13374
Reviewed by Campbell Barton
Allowing setting and storing of the default font size as float.
See D13230 for more details.
Differential Revision: https://developer.blender.org/D13230
Reviewed by Campbell Barton
Removal of declaration of unused blf_font_draw_ascii
See D13624 for more details.
Differential Revision: https://developer.blender.org/D13624
Reviewed by Campbell Barton
Cache the font size's ideal fixed width column size in the glyph cache
rather than the font itself to improve performance.
See D13226 for more details.
Differential Revision: https://developer.blender.org/D13226
Reviewed by Campbell Barton
blf_glyph_cache_free does not need to be public.
See D13395 for more details.
Differential Revision: https://developer.blender.org/D13395
Reviewed by Campbell Barton
`viewops_data_alloc` allocates and stores some pointers in
`ViewOpsData` while `viewops_data_create` reuses already stored
pointers and also stores others in `ViewOpsData`.
The similar names and usages can confuse and in this case it also
creates a dependency on the order in which these functions are called.
Merging these functions simplifies usage and deduplicates code.
Since we have a node that sets a mesh's auto smooth angle
(unfortunately, in retrospect), we generally can't assume at all
that value is the same as whatever input mesh. Similar asserts
were removed previously in 8216b759e9. While the attempt
at assertions to clarify assumptions is noble, this one doesn't
make sense anymore.
I found this while investigating T95479.
Differential Revision: https://developer.blender.org/D14009
- Fix image.format conversion to string
- Fix warnings about ARB_conservative_depth not found even if GL > 4.2
- Add `array(type)` define for portable array definition
Thanks to the new `ShaderCreateInfo` we now include source files without
any modification. This let us query which are the source files passed to the
`print_log` function. The log will now include a file with row and column
number which is interpreted as a link in most IDE.
DEBUG_CONTEXT_LINES will add more lines around the error lines for more
context. This is also useful if the error line is imprecise (because of
driver bugs) and the reported line is not sufficient to know the location
of the error.
The DEBUG_DEPENDENCIES option will display the list of included files in
the shader sources. Note that it will not print generated source.
This commit also fixes some issues with unhelpful logs, bogus row & column
numbers, other error format, and bug if row was 0.
Source files are now only referenced and listed for the driver to ingest.
Shader sources now includes generated data if any.
Also cleans up gpu_shader_dependency_get_builtins casts.
This includes multiple commits:
- Fix crash when using std::cerr for error output
- Add auto_resource_location which overrides all resources location (not vert input)
- Improve codestyle of error reporting.
- Add type conversion to string and to `eGPUType`
- Add comparison operator (will be used for hash collision resolution).
- Add members related to generated code (codegen)
Detected on `amdgpu-pro` libGL implementation. The workaround is to not
use explicit location for vertex attributes. This is not a real problem
as we don't rely on them for now.
This was an oversight in the patch that added this node,
the default merge distance is meant to be the same as the weld
modifier, 0.001m, meaning by in most situations it removes
vertices generally at the same location.
- Compute ref let the size of dispatch be modified just before drawing.
- Barrier call makes it possible to chain multiple compute passes in one pass.
- DRW_shgroup_vertex_buffer_ref is the analog of DRW_shgroup_uniform_block_ref.
Since we have a node that sets a mesh's auto smooth angle
(unfortunately, in retrospect), we generally can't assume at all
that value is the same as whatever input mesh. Similar asserts
were removed previously in 8216b759e9. While the attempt
at assertions to clarify assumptions is noble, this one doesn't
make sense anymore.
I found this while investigating T95479.
Differential Revision: https://developer.blender.org/D14009
This commit adds infrastructure for 8 bit signed integer attributes.
This can be useful given the discussion in T94193, where we want to
store spline type, Bezier handle type, and other small enums as
attributes.
This is only exposed in the interface in the attribute lists, so it
shouldn't be an option in geometry nodes, at least for now.
I expect that this type won't be used directly very often, it
should mostly be cast to an enum type. However, with support
for 8 bit integers, it also makes sense to add things like mixing
implementations for consistency.
Differential Revision: https://developer.blender.org/D13721
Required to solve a crash on windows (T95367)
Mostly an uneventful update, except for FreeType
giving its cmake options a rename.
Reviewed By: brecht, sybren
Differential Revision: https://developer.blender.org/D13968
Every translation unit that included the modified headers generated
some extra code, even though it was not used. This adds unnecessary
compile time overhead and is annoying when investigating the
generated assembly.
Initialization with `MEM_new()` depends a lot on the initialization rules
of C++, which are not obvious. Calling it with no arguments to be passed
to the constructor may cause the resulting object to be implicitly 0
initialized (or parts of it). This can have an impact on performance
sensitive code, so it's something to document.
Alternatively we could enforce default initialization (as opposed to the
value initalization that happens now), but this could cause
uninitialized memory in a way that isn't obvious either. This is a
possible source of bugs, so Jacques and I decided against it.
Use the global F2 rename panel for the NLA editor to rename NLA strips.
Reviewed By: sybren, RiggingDojo
Differential Revision: https://developer.blender.org/D12300
It was missing framework flags added in `setup_platform_linker_flags`.
Keep it off until QuickLook Thumbnailing is implemented.
Differential Revision: https://developer.blender.org/D13997
The check for existence of custom data layers did not take wrapper nature of
mesh into account.
Quickest and safest for 3.1 solution is to take care of branching of checks
in the draw manager.
Ideally both wrapper and mesh access will happen via the same public API
without branching in the "user" code. That is something outside of the fix
for the coming release though.
Differential Revision: https://developer.blender.org/D14013
This callback was only needed to allow specific handling of proxies, now
that theses have been removed the generic
`BKE_lib_id_make_local_generic` code works for objects as well.
Byte images are converted to float. Due to an issue how VSE cache is
freeing its images we cannot store these float buffers what leads
to recalculating it for each change in the image editor.
This fix will reduce the slowdown to areas that have the root cause of
the memory leak, so the buffers can be reused between refreshes.
NOTE: The root cause should still be fixed.
Thanks for reporting Sybren!
Didn't cause visible issues, because the layout uses spacers to
right-align text, which happens to use the region size with pixel-size
applied for calculations.
Some navigation operators check flags like `RV3D_LOCK_ROTATION` in the
invoke function to see if the operation can be performed.
As the comment indicates, these checks should be in the poll function.
This avoids redundant initialization.
Note that this brings functional changes as now operators with context
`EXEC_DEFAULT` will also be affected by the flag.
(There doesn't seem to be a problem with the current code).
Differential Revision: https://developer.blender.org/D14005
The strings in the `get_description` functions for operators need
translation, they are not found by the translation system automatically,
and there is no translation applied afterwards either (as far as I could
tell). Some used `N_` before, but most did nothing.
Differential Revision: https://developer.blender.org/D14011
The case where Y rotation is mapped to Y rotation was not handled.
This is now fixed.
Also added an automated test to make sure that the symmetrize operator
functions as intended.
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D9214
This was caused by macros interpreted as recursive. Workaround by
not using macros at all and just define local variables which
hopefully will be optimized.
This was caused by macros interpreted as recursive. Workaround by
not using macros at all and just define local variables which
hopefully will be optimized.
Crash introduced by {rB0cb5eae}.
When switching to between drawing modes the region.draw_buffer could be
uninitialized when the gizmo depth test is performed. When the mouse is
placed on top of a gizmo part that could be highlighted would crash.
This fix adds a early exit when depth testing is requested, but there
isn't a draw_buffer. Not sure this is an root cause fix.
Reported by multiple animators in Blender Studio.
Technically, this can't be relied upon in the long term. It worked more or
less accidentally before. It was broken by a previous fix accidentally. I mainly
bring it back because rBa985f558a6eb16cd6f0 was not expected to have
this side effect.
Note, this change can result in slower performance. Writing to a vertex
groups is less efficient than using a generic attribute.
Previously, these methods used the more generic substring-finding
algorithm, which is more complex and slower.
Using the more specialized methods results in a noticable speedup
in the obj importer (D13958).
Differential Revision: https://developer.blender.org/D14012
When viewing backdrop on top of the node grid, the grid would be
rendered black when the mode wasn't set to RGBA. This fix fixes this by
reverting the previous fix of drawing the backdrop and implement a
different one that recomputes the UV coordinates on the screen edges.
DNAstr was assumed to be 4-byte aligned which is not necessarily
the case for byte-arrays.
Use a compiler attribute to ensure this is the case.
Thanks to @mtasaka for investigating and providing a patch.
Part of T91671.
Not much else to say, this is mainly a massive deletion of code.
Note that a few cleanups possible after this proxy removal were kept out
of this commit to try to reduce a bit its size.
Reviewed By: sergey, brecht
Maniphest Tasks: T91671
Differential Revision: https://developer.blender.org/D13995
This doesn't make a user visible difference since it's only used for
brackets at the moment, this is more for general correctness as the
width calculation for mono-spaced text drawing is different
(as it uses BLI_wcwidth).
ED_transverts_create_from_obedit expected an evaluated object.
Add flag to request TX_VERT_USE_MAPLOC to be set, which avoids having to
calculate this data when it's not used as well as the requirement
that the input object be evaluated from the depsgraph.
This fixes the crash by removing the `do_view3d_header_buttons` handler.
The code can work at a higher level here, using the operator for setting
the select mode, which makes this patch a cleanup as well.
The operator now has a description callback to add the custom
description used for the behavior in its invoke method.
Differential Revision: https://developer.blender.org/D13660
Since f59767ff97, these hair layer types are unused. Since DNA
compatibility was broken with any files that would contain them, the
indices can be reused to avoid growing custom data's typemap.
In the future when we have a docs staging area it will be
important to change where this JSON is pulled from.
For now, always pull from the "Production" versions
This commit adds a version switch similar to the one on the user manual,
in the future it would be nice to refactor both of these into a more generic
code that works for both. Maybe develop this into a sphinx extension.
As part of this change I had to change how the blender hash is displayed.
Instead of the version hash in the top left it has been moved to the page footer.
This change will also be backported to 2.93 LTS, 2.93 LTS, and 3.0.
This patch refactors the "Hair" data-block, which will soon be renamed
to "Curves". The larger change is switching from an array of `HairCurve`
to find indices in the points array to simply storing an array of offsets.
Using a single integer instead of two halves the amount of memory for that
particular array.
Besides that, there are some other changes in this patch:
- Split the data-structure to a separate `CurveGeometry`
DNA struct so it is usable for grease pencil too.
- Update naming to be more aligned with newer code and the style guide.
- Add direct access to some arrays in RNA
-- Radius is now retrieved as a regular attribute in Cycles.
-- `HairPoint` has been renamed to `CurvePoint`
-- `HairCurve` has been renamed to `CurveSlice`
- Add comments to the struct in DNA.
The next steps are renaming `Hair` -> `Curves`, and adding support
for other curve types: Bezier, Poly, and NURBS.
Ref T95355
Differential Revision: https://developer.blender.org/D13987
This is partially caused by a stupid mistake in cfa53e0fbe
where I missed initializing the `vert_normals` pointer in
`MResolvePixelData`. It's also caused by questionable assumptions
from DerivedMesh code that vertex normals would be valid.
The fix used here is to create a temporary mesh with the data necessary
to compute vertex normals, and ensure them here. This is used because
normal calculation is only implemented for `Mesh` and edit mesh, not
`DerivedMesh`. While this might not be great for performance, it's
potentially aligned with future refactoring of this code to remove
`DerivedMesh` completely. Since this is one of the last places the data
structure is used, that would be a great improvement.
Differential Revision: https://developer.blender.org/D13960
Iterating over scene's objects while we modify those (through proxy to
override conversion code) is call for problems (use after free etc.).
Instead, all proxy objects need to be gathered first in a temporary
list, and processed all at once in a second loop.
`BKE_collection_object_add` ensures given object is added to an editable
collection, and not e.g. a linked or override one.
However, some processes like do_version manipulate collections also from
libraries, i.e. linked collections, in those cases we need a version of
the code that unconditionnally adds the given object to the given
colleciton.
This is from patch D13988. It removes the "- New" from the menu of the
new obj exporter, changes the default addon to just io_import_obj,
and does the right versioning thing.
Also disables the python tests for the old python exporter.
This patch reverts the normal behavior of the spotlights. In the last fix,
the returned normal of a spot light was equal to its direction. This broke
some texturing methods used by artists.
Differential Revision: https://developer.blender.org/D13991
The view3d_edit.c file is already getting big (5436 lines) and mixes
operators of different uses.
Splitting the code makes it easier to read and simplifies the
implementation of new features.
Differential Revision: https://developer.blender.org/D13976
Those cases are fairly hard to track down... Added some more checks,
also at lower levels, more generic levels of object editing, and fixed
core check in liboverride (previously code was assuming that an override
of a collection only could have overrides of objects or linked objects,
but this is not necessarily true).
This is from patch D13988. It removes the "- New" from the menu of the
new obj exporter, changes the default addon to just io_import_obj,
and does the right versioning thing.
Also disables the python tests for the old python exporter.
Use the ID.recalc flag to detect when updates after frame-change is
needed. Since comparing the last calculated frame doesn't take undo into
account (see code-comment for details).
`ID_RECALC_AUDIO_SEEK` has been renamed to `ID_RECALC_FRAME_CHANGE`
since this is not only related to audio however internally this flag is
still categorized in `NodeType::AUDIO`.
Reviewed By: sergey
Ref D13942
The issue was happening with a specific file where the ID management
code was not fully copying all modifiers because of the extra check
in the `BKE_object_support_modifier_type_check()`.
While it is arguable that copy-on-write should be a 1:1 copy there is
no real need to maintain the per-modifier pointer to its original.
Use its SessionUUID to perform lookup in the original datablock.
Downside of this approach is that it is a linear lookup instead of
direct pointer access, but the upside is that there is less pointers
to manage and that the file with unsupported modifiers does behave
correct without any asserts.
Differential Revision: https://developer.blender.org/D13993
The modifiers are mapped between original and evaluated objects based on
their session IDs. The pointer to original modifier is no longer needed
for the backup: it remained from the initial implementation which was
rewritten at some point.
This is a preparation for removal of the pointer to original modifier.
c9d9bfa84a caused a regression in when
the right-mouse select action was set to "Select & Tweak" (default).
Now the fallback tool works with RMB select as it did before.
This will allow to keep the access to deprecated DNA proxy data in that
specific file, instead of allowing deprecated accesses in the whole
override kernel code.
Part of T91671.
Part of the resynching code would access collections' objects base
cache, which can be invalid at that point (due to previous ID remapping
and/or deletion). Use a custom recursive iterator over collections'
objects instead, since those 'raw' data like collection's objects list,
and collection's children lists, should always be valid.
Found while investigating a studio production file.
This is a temp fix for a memory leak where the VSE isn't aware that a
float representation of the image could exist. The VSE somehow doens't
clears it (refcounter is still 1).
The work around is just to let the image engine clean up all the data it
created. Potential this would add more overhead when buffers are needed
more than once.
This refactors how output attributes are computed in the geometry
nodes modifier. Previously, all output attributes were computed one
after the other. Every attribute was stored on the geometry directly
after computing it. The issue was that other output attributes might
depend on the already overwritten attributes, leading to unexpected
behavior.
The solution is to compute all output attributes first before changing the
geometry. Under specific circumstances, this refactor can result in a speedup,
because output attributes on the same domain are evaluated together now.
Overwriting existing might have become a bit slower, because we write the
attribute into new buffer instead of using the existing one.
Differential Revision: https://developer.blender.org/D13983
Mistake in the 974981a637: f the edit data is not present then the
origindex codepath is to be used. Added a brief note about it on the
top of the file.
More ideally would be to remove edit mesh from non-bmesh-wrappers
but this would require changes in the draw manager to make a proper
decision about drawing edit mode overlays.
Now all proxies will always be converted to library overrides. If
conversion fails, they are simply 'disabled'.
This should be the last 'user-visible' step of proxies removal.
Remaining upcoming commits will remove internal ID management, depsgraph
and evaluation code related to proxies.
Also bump the blendfile subversion.
Part of T91671.
So far linked proxies were just kept as-is, this is no longer an option.
Attempt to convert them into liboverrides as much as possible, though
some cases won't be supported:
- Appending proxies is broken since a long time, so conversion will fail
here as well.
- When linking data, some cases will fail to convert properly. in
particular, if the linked proxy object is not instanced in a scene
(e.g. when linking a collection containing a proxy as an
epty-instanced collection instead of a view-layer-instanced collection).
NOTE: converion when linking/appending is done unconditionnaly, option
to not convert on file load will be removed in next commit anyway.
Part of T91671.
This will help when dealing with liboverrides from other library files,
e.g for resync or proxies conversion.
This commit only affects proxy conversion.
Part of T91671.
We have this node for shader and geometry nodes. Compositor can also
work with vectors, and this can help with that.
Reviewed By: manzanilla
Maniphest Tasks: T95385
Differential Revision: https://developer.blender.org/D12919
The geometry nodes modifier currently always adds a dependency
relation from the evaluated geometry to the object transform. However,
that can be avoided unless there is a collection or object info node in
"Relative" mode.
In order to avoid requiring dependency graph relations updates often
when editing a node tree, this patch doesn't check if the node is muted
or if the data-block sockets are empty before adding the dependency.
Fixes T95265
Differential Revision: https://developer.blender.org/D13973
Function `IMB_indexer_get_seek_pos()` can return non 0 seek position for
frame index 0. This causes seeking to incorrect GOP and scanning ends
with failiure.
Hard-code first frame index seek position to 0.
Differential Revision: https://developer.blender.org/D13974
Some items on the Quick Setup screen can be truncated with some
languages and/or with High DPI monitors. This patch adjusts column
sizes and turns off the expand on Spacebar options, making everything
fit a bit better.
See D9853 for more details.
Differential Revision: https://developer.blender.org/D9853
Reviewed by Julian Eisel
Using opt-in instead of opt-out to make code easier to read.
Add combined flag enum.
Making restrict an inverse flag option because it is so rare to
use it.
This adds the possibility to use the `gpu_BaryCoord[NoPersp]`
builtin to support barycentric coordinates without geometry shader.
The `BuiltinBits::LAYER` builtin needs to be manually added
to the `GPUShaderCreateInfo` in order to use this feature.
Note: This is only available for shaders using `GPUShaderCreateInfo`.
A geometry shader fallback is generated if the extension
`AMD_shader_explicit_vertex_parameter` is not available.
`NV_fragment_shader_barycentric` was not considered because it is not
present inside the `glew.h` with use and seems to only be available
with vulkan.
This adds the possibility to use the `gpu_Layer` builtin to
support layered rendering without geometry shader.
The `BuiltinBits::LAYER` builtin needs to be manually added
to the `GPUShaderCreateInfo` in order to use this feature.
Note: This is only available for shaders using `GPUShaderCreateInfo`.
A geometry shader fallback is generated if the extension
`AMD_shader_explicit_vertex_parameter` is not available.
- Scan all static shaders for builtins on startup.
- Add possibility to manually add builtins.
- `ShaderCreateInfo.builtins_` contain builtins from all stages.
If an entire cyclic stroke was selected, calling "Separate by Points"
would leave a gap in the new object (making the new stroke non-cyclic).
The patch makes sure that if we separate by points and all points are
selected, we fall back to separate by stroke.
Reviewed By: antoniov
Maniphest Tasks: T91463
Differential Revision: https://developer.blender.org/D12527
This patch fixes the error that pops up
(`Error: Unable to execute '... Mode Toggle', error changing modes`)
when trying to switch to e.g. draw mode from a grease pencil object
that was saved in draw mode in an inactive scene when the file was loaded.
Note that this does not fix the bigger issue described in T91243.
The fix makes sure that we reset all the mode flags on the grease pencil
data when we set the mode to object mode.
Reviewed By: antoniov
Maniphest Tasks: T89514
Differential Revision: https://developer.blender.org/D12419
When adding an asset library in the Preferences, set the name of the new
library to the chosen directory's name by default. That avoids having to
set it manually which can be annoying. Previously I thought it would be
nice to show the name button in red then, making the user aware that
they have to give it a name, but that appears to be more annoying than
useful/practical after all.
The issue was that the code only looked at `dob->ob`
instead of `dob->ob_data` which is necessary since
rB5a9a16334c573c4566dc9b2a314cf0d0ccdcb54f.
This now uses the same pattern that is used in other places
where `BKE_object_replace_data_on_shallow_copy` is used.
Blender would have crashed when renaming bone in Edit Mode, Saving, and
than selecting/deselecting.
Caused by a mistake in the 0f89bcdbeb: can not "short-circuit" the
CoW update if it was explicitly requested.
Safest for now solution seems to be to store whether the CoW component
has been explicitly tagged, so that the following configuration can be
supported:
DEG_id_tag_update(id, ID_RECALC_GEOMETRY);
DEG_id_tag_update(id, ID_RECALC_COPY_ON_WRITE);
Differential Revision: https://developer.blender.org/D13966
Since splitting the depth and the color shader in the image engine the
backdrop wasn't visible anymore. The reson is that the min max uv
coordinates were never working for the node editor backdrop that uses
its own coordinate space.
This partial fix will ignore the depth test when drawing the color part
of the backdrop. This will still have artifacts that are visible when
showing other options as RGBA.
Proper fix would be to calculate the the uv vbo in uv space and not in
image space.
Can also happen in other places when the overlay engine is active. Some
parts of the overlay engine uses builtin shaders, but disable the color
space conversion to the target texture.
Currently there the overlay engine has its own set of libraries it could
include and defined a macro to pass-throught the color space conversion.
The library include mechanism currently fails when it couldn't find the
builtin library in the libraries of the overlay engine. This only
happened in debug mode.
This change will not fail, but warns the developer if a library could
not be included. In the future this should be replaced by a different
mechanism that can disable the builtin library. See {T95382}.
Since d9c6ceb3b8 partial updates to
normals in sculpt-mode were accumulating into the current normal
instead of a zeroed value.
Zero vertex normal values tagged for calculation before accumulation.
Reviewed By: HooglyBoogly
Ref D13975
From investigating T95185, it's important the normal returned by
SCULPT_vertex_normal_get always match the PBVH normal array.
Since this is always initialized in the PBVH, there is no advantage
in storing the normal array in two places, it only adds the possibility
that changes in the future causing different meshes normals to be used.
Split out from D13975.
Since 0ea0ccc4ff, `AV_PIX_FMT_YUV444P` pixel format was used for
lossless renders, which did override `AV_PIX_FMT_YUVA420P` format when
"RGBA" output is chosen. VP9 encoder doesn't seem to support
`AV_PIX_FMT_YUVA444P` pixel format, so use `AV_PIX_FMT_YUVA420P` for
lossless RGBA ouput instead.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D13947
Currently, audio and video strips are synchronized based on data from
media stream, which is nice, but this causes gaps between strips.
This synchronization was implemented by moving movie strip position
relative to sound, which doesn't make much sense for user which is
mostly interested in editing video.
Code was bit hard to read, so it has been simplified. Ideally video
stream time would be easily accessible so synchronization could be done
at any time, but this is not necessary at this point.
Reviewed By: zeddb
Differential Revision: https://developer.blender.org/D13948
Correct corner radius of the node outline to prevent a noticeable gap in
some cases.
---
Currently we make a small mistake in the creation of the node outline:
We offset the rectangle describing the outline by the outline thickness,
but we don't adjust the corner radius accordingly.
Therefore the rounded corner of the outline and the node body are not
concentric which can sometimes lead to a visible gap at the corner.
How noticeable it is depends on the theme, the screen's dpi and the
line thickness set in the preferences.
Simply adjusting the corner radius for the outline to also be increased
by the outline thickness fixes this small issue.
| display, line thickness | **patch** | **master** |
| --- | --- | --- |
| 1080p, default/thin | {F12835304} | {F12835305} |
| retina, thin | {F12835306} | {F12835307} |
The issue was mentioned by @hitrpr
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D13955
Use the evaluated mesh to generate the Adjacent Faces margin.
Baking used the evaluated mesh, but generating the margin used the base
mesh. This would lead to generating the margin from a stale UV map when the
UV editor was open and the UV map was changed. Fix it by passing the same
mesh as used for baking through to the margin generation.
Differential Revision: https://developer.blender.org/D13938
The new adjacent faces method border lookup fails in some directions around
45 degrees
* Use 8 Dijkstra directions (also diagonally) to determine which polygon is the
closest to each pixel. Using only Manhattan distance lead to large parts of
the texture which were matched with the wrong polygon.
* Use neighbroing polygons for edge search. The Adjacent Faces algorithm needs
to determine the closest edge, in UV space, each pixel. To speed this up
first as map is built which finds the closest polygon for each pixel along
horizontal, vertical and diagonal steps. Because this can sometimes be one
edge off we first look in the polygon from the map, if that fails also
check the edges of its neighbouring UV polygons.
Differential Revision: https://developer.blender.org/D13935
For those EEVEE passes a bit of trickery with pointer offsets allows to
get the owning viewlayer, so path generation is not too bad.
Also moved ViewLayer path generation itself into a public utils, to
avoid duplicating code.
NOTE: Doing the same for AOV would be needed, but since pointer offsets
won't help us here to find the owning viewlayer, not sure how to do it
nicely yet (only solution I think is to loop over all AOVs of all
ViewLayer of the scene to find it :( ).
Reported by Beau Gerbrands (@Beaug), thanks.
Image buffer was visible but buffer wasn't available. In the case
the color only overlay of the render result was displayed the image
buffer was not check to be valid.
This patch adds a null pointer check to check in `IMB_alpha_affects_rgb`
to solve this crash.
This commit specifies the exact Python version which is included in the
package name, thereby allowing `install_deps.sh` to suggest
"`-D PYTHON_VERSION=3.10`" correctly.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D13925
Empty (UDIM) tiles where drawn with a transparency checkerboard. They
should be rendered with a border background. The cause is that the image
engine would select a single area that contained all tiles and draw them
as being part of an image.
The fix is to separate the color and depth part of the image engine
shader and only draw the depths of tiles that are enabled.
While this didn't cause any user visible bugs, this wouldn't
have behaved as intended since the timer would never run again once
wmTimer.ntime was set to NAN.
GPU_select originally used GL_SELECT which defined the format for
storing the selection result.
Now this is no longer the case, define our own struct - making the code
easier to follow:
- Avoid having to deal with arrays in both `uint*` and `uint(*)[4]`
multiplying offsets by 4 in some cases & not others.
- No magic numbers for the offsets of depth & selection-ID.
- No need to allocate unused members to match GL_SELECT
(halving the buffer size).
Remove functions and function pointers that were never set or never
used at all. The "tessface" original index handling in `subsurf_ccg.c`
can be removed because the data was never used.
This function and flags weren't used outside of DerivedMesh
code, and since the plan is to remove the data structure, it makes
sense to remove complexity where possible.
This is a patch from Aras Pranckevicius, D13927. See that patch for full
details. On Windows, the many small fprintfs were taking up a large amount
of time and significant speedup comes from using snprintf into chained buffers,
and writing them all out later.
On both Windows and Linux, parallelizing the processing by Object can also lead
to a significant increase in speed.
The 3.0 splash screen scene exports 8 times faster than the current C++ exporter
on a Windows machine with 32 threads, and 5.8 times faster on a Linux machine
with 48 threads.
There is admittedly more memory usage for this, but it is still using 25 times
less memory than the old python exporter on the 3.0 splash screen scene, so
this seems an acceptable tradeoff. If use cases come up for exporting obj files
that exceed the memory size of users, a flag could be added to not parallelize
and write the buffers out every so often.
Previously, the new obj exporter was only exporting per-vertex normals for faces
marked as "smooth". But a face can have custom normals, as soon as the normals
data layer exists. This change makes it follow the behavior of USD & Collada
exporters and the old Python one, which also export per-vertex normals as soon
as the layer is there. (From Patch D13957.)
This is similar to e032ca2e25 which removed the
callback for volumes. Now that we have geometry sets, there is
no need to define a callback for every data type, and this wasn't
used. Procedural curves/hair editing will use nodes rather than new
modifier types anyway.
Since `event->xy` is now an array these functions can be
simplified to accept the sample point as an array.
Clarifications were also made to variable names:
- `eye->last_x/y` --> `eye->cursor_last`
- `mx/my` --> `cursor`
Differential Revision: https://developer.blender.org/D13671
Previously, macros were ifdefed using the cmake option `WITH_INTERNATIONAL`
However, the is unnecessary as withen the functions themselves have checks for building without internationalization.
This also means that many `add_definitions(-DWITH_INTERNATIONAL)` are also unnecessary.
Reviewed By: mont29, LazyDodo
Differential Revision: https://developer.blender.org/D13929
This fixes a regression from rBa0edee712a79239133ff840f911f6416d4c41855.
Issue being the curve map not being initialized in the GPU shader function.
Fixes T95221
This fixes a regression from rBa0edee712a79239133ff840f911f6416d4c41855.
Issue being the curve map not being initialized in the GPU shader function.
Fixes T95221
As part of the project of converting `MVert` into `float3`
(more details in T93602), this is an easy step, since it
is only locally used runtime data. In the six places it was
used, the flag was replaced by a local bitmap.
By itself this change has no benefits other than making some
code slightly simpler. It only really matters when the other
flags are removed and it can be removed from `MVert`
along with the bevel weight.
Differential Revision: https://developer.blender.org/D13878
For every spline, *all* of the normals and tangents in the output
were normalized. The node is multithreaded, so sometimes a thread
overwrote the normalized result from another thread.
Fixing this problem also made the node orders of magnitude
faster when there are many splines.
Show a more instructive error message for users who have plugged
multiple monitors into multiple display adapters. And do not exit
if unable to open a child window when in this state.
See D13885 for more details
Differential Revision: https://developer.blender.org/D13885
Reviewed by Ray Molenkamp
The GLSL defines used to make the uniform names unusable for local variable
is being interpreted as recursive on some implementation.
This avoids it by create a second macro avoiding the recursion.
Allow Windows IME Pinyin, when in Chinese mode, to use numpad decimal
key to enter decimal point.
See D13902 for more details.
Differential Revision: https://developer.blender.org/D13902
Reviewed by Brecht Van Lommel
Convert Ideographic Full Stop, used in Simplified Chinese and Japanese,
to Decimal Point when entering numbers into numerical inputs.
See D13903 for more details
Differential Revision: https://developer.blender.org/D13903
Reviewed by Brecht Van Lommel
This patch adds a "OneDrive" icon to the File Manager System list for
Windows (only!).
See D11133 for more details.
Differential Revision: https://developer.blender.org/D11133
Reviewed by Julian Eisel
Initialize m_Bar, m_dropTarget, & m_hWnd members of GHOST_WindowWin32
in constructor's member initializer list. This ensures they are are
set or NULL in destructor if constructor does not complete.
See D13886 for more details.
Differential Revision: https://developer.blender.org/D13886
Reviewed by Jesse Yurkovich
Buttons can hold context and it's very useful to use this as a way to
let buttons provide context for drop operators.
For example, with this D13549 can make the material slot list set the
material-slot pointer for each row, and the drop operator can just query
that.
Sometime throughout development some checks got lost during refactor.
This change makes it so that if OIDN is not supported on the current
CPU Cycles will report an error and stop rendering. This behavior is
similar to when an OptiX denoiser is requested and there is no OptiX
compatible device available.
The easiest way to verify this change is to force return false from
the `openimagedenoise_supported()`.
Fixes Cycles part of the T94127.
Differential Revision: https://developer.blender.org/D13944
Parameter was used to still be compatible with the previous drawing mode.
The previous mode isn't available anymore so the parameter can should be
removed.
After showing the alpha in the image editor the setting was not reset
so all images in the editor showed as being transparent.
This commit fixes this by resetting the flag before updating.
In Outliner, 'Make Override Hierarchy' on an indirectly linked data would
fail in case some items higher up in the hierarchy also needed to be
overridden was also indirectly linked.
In Outliner, 'Make Override Hierarchy' on an indirectly linked data would
fail in case some items higher up in the hierarchy also needed to be
overridden was also indirectly linked.
Adding better support for drawing huge images in the image/uv editor. Also solved tearing artifacts.
The approach is that for each image/uv editor a screen space gpu texture is created that only contains
the visible pixels. When zooming or panning the gpu texture is rebuild.
Although the solution isn't memory intensive other parts of blender memory usage scales together with
the image size.
* Due to complexity we didn't implement partial updates when drawing images tiled (wrap repeat).
This could be added, but is complicated as a change in the source could mean many different
changes on the GPU texture. The work around for now is to tag all gpu textures to be dirty when
changes are detected.
Original plan was to have 4 screen space images to support panning without gpu texture creation.
For now we don't see the need to implement it as the solution is already fast. Especially when
GPU memory is shared with CPU ram.
Reviewed By: fclem
Maniphest Tasks: T92525, T92903
Differential Revision: https://developer.blender.org/D13424
This patch reimplements the image partial updates. Biggest design motivation for the redesign
is that currently GPUTextures must be owned by the image. This reduces flexibility and adds
complexity to a single component especially when we want to have different structures.
The new design is not limited to GPUTextures and can also be used by reducing overhead in image
operations like scaling. Or partial image updating in Cycles.
The usecase in hand is that we want to support virtual images in the image editor so we can
work with images that don't fit in a single GPUTexture.
Using `BKE_image_partial_update_mark_region` or `BKE_image_partial_update_mark_full_update`
a part of an image can be marked as dirty. These regions are stored per ImageTile (UDIM).
When a part of the code wants to receive partial changes it needs to construct a `PartialUpdateUser`
by calling `BKE_image_partial_update_create`. As long as this instance is kept alive the changes can
be received.
When a user wants to update its own data it will call `BKE_image_partial_update_collect_changes`
This will collect the changes since the last time the user called this function. When the partial changes
are available the partial change can be read by calling `BKE_image_partial_update_get_next_change`
It can happen that the introduced mechanism doesn't have the data anymore to construct the
changes since the last time a PartialUpdateUser requested it. In this case it will get a request
to perform a full update.
Maniphest Tasks: T92613
Differential Revision: https://developer.blender.org/D13238
Assert when "//" prefixed relative paths are passed to
BLI_path_cmp_normalized as this can't be expanded
and it's possible the paths come from different blend files.
Changes to recent addition: c85c52f2ce.
Having both BLI_paths_equal and BLI_path_cmp made it ambiguous
which should be used, as `BLI_paths_equal` wasn't the equivalent to
`BLI_path_cmp(..) == 0` as it is for string equals macro `STREQ(..)`.
It's also a more specialized function which is not used for path
comparison throughout Blender's internal path handling logic.
Instead rename this `BLI_path_cmp_normalized` and return the result of
`BLI_path_cmp` to make it clear paths are modified before comparison.
Also add comments about the conventions for Blender's path comparison
as well as a possible equivalent to Python's `os.path.samefile`
for checking if two paths point to the same location on the file-system.
The `OUTLINER_OT_item_activate` operator, although it detects when
something changes, always returns `OPERATOR_FINISHED` and thus induces
the creation of undo steps.
So return `OPERATOR_CANCELLED` when nothing changes.
Ref T94080
Reviewed By: Severin
Maniphest Tasks: T94080
Differential Revision: https://developer.blender.org/D13638
- Fix assert on size.
- Fix void * casting.
- Pass extent by values.
- Add swap function to avoid letting the types copyable.
- Add back the GPUTexture * operator on TextureFromPool.
Does two main changes:
* Handle regions in the order as visible on screen. Practically this
just means handling overlapping regions before non-overlapping ones.
* Don't handle any other regions after having found one containing the
mouse pointer.
Fixes: T94016, T91538, T91579, T71899 (and a whole bunch of duplicates)
Addresses: T92364
Differential Revision: https://developer.blender.org/D13539
Reviewed by: Campbell Barton
Asserts that such events actually always lead to a handler return value
that actually keeps the event passing.
Reviewed by Campbell Barton as part of
https://developer.blender.org/D13539.
Though the edge vertices aren't really meant to have an order,
it can make a difference in operations when there isn't any other
information to make decisions from, like etruding a circle of
loose edges (the situation in the report). This commit changes
the order of the vertices in the final cyclic edge to go in the
same direction as all of the other edges.
The vertex and face normals from the input mesh
were used to calculate the normals on the result,
which could cause a crash because the result should
be about twice as large.
Also remove an unnecessary dirty tag, since it is handled
automatically when creating a new mesh or in the case
of the mirror modifier, when calculating the new custom
face corner normals.
Swap "active" and "selected" in the tooltip if the `use_reverse_transfer`
option is activated.
Reviewed By: mont29
Maniphest Tasks: T85233
Differential Revision: https://developer.blender.org/D13499
Also fixes similar issues regarding some liboverride menu entries.
Reviewed By: mont29
Maniphest Tasks: T93766
Differential Revision: https://developer.blender.org/D13513
Add `USD Preview Surface From Nodes` export option, to convert a
Principled BSDF material node network to an approximate USD Preview
Surface shader representation. If this option is disabled, the original
material export behavior is maintained, where viewport setting are saved
to the Preview Surface shader.
Also added the following options for texture export.
- `Export Textures`: If converting Preview Surface, export textures
referenced by shader nodes to a 'textures' directory which is a
sibling of the USD file.
- `Overwrite Textures`: Allow overwriting existing texture files when
exporting textures (this option is off by default).
- `Relative Texture Paths`: Make texture asset paths relative to the
USD.
The entry point for the new functionality is
`create_usd_preview_surface_material()`, called from
`USDAbstractWriter::ensure_usd_material()`. The material conversion
currently handles a small subset of Blender shading nodes,
`BSDF_DIFFUSE`, `BSDF_PRINCIPLED`, `TEX_IMAGE` and `UVMAP`.
Texture export is handled by copying texture files from their original
location to a `textures` folder in the same directory as the USD.
In-memory and packed textures are saved directly to the textures folder.
This patch is based, in part, on code in Tangent Animation's USD
exporter branch.
Reviewed By: sybren, HooglyBoogly
Differential Revision: https://developer.blender.org/D13647
Downgrade the Python zstandard from 0.17.0 to 0.16.0. The Python package
should be linked against the exact same version of libzstd as Blender is,
otherwise it will refuse to load from within the Blender executable.
Python zstandard 0.17.0 links to 1.5.1, whereas we need 1.5.0.
`chardet` was replaced by `charset_normalizer` for modern `requests`.
With this change, `{make,ninja} install` will also copy the latter into
Blender's install directory.
This opt-in functionnality enabled developper keep track of unused
resources present in the `GPUShaderCreateInfo` descriptors of their
shaders.
The output is pretty noisy at the moment so we do not enforce its usage.
While install_deps tries to stay as close as possible from official
Blender versions of the libraries, it also strives to use as many distro
packages as possible.
OSL 1.11.16.0 is the minimal version that builds with llvm13, which is
the default llvm/clang version in e.g. Debian testing.
Adds two new attribute outputs:
"Line" outputs the line number of the character.
"Pivot Point" outputs the selected pivot point position per char.
Some refactoring of the text layout code.
Differential Revision: https://developer.blender.org/D13694
`node_exec` had some code that was specific to texture/shader nodes.
These functions arent used outside there module so limit there declarations.
Also make a function static that is only used in `node_exec.c`
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D13899
The `TreeElement.rnaptr` was only needed for RNA tree-elements. Now it
can be gotten through the new type specific classes, e.g.
`TreeElementRNAProperty.getPointerRNA()`.
Plan is to remove things like `TreeElement.directdata` and to instead
expose specific queries in the new type specific tree-element classes.
e.g. like here: `TreeElementSequence.getSequence()`
For now uses `tree_element_cast<>()` to get the new type specific
tree-element, later these should replace `TreeElement` all together.
Add function to safely request the type-specific C++ element from a
C-style `TreeElement`. Looks like this:
```
TreeElementFoo *te_foo = tree_element_cast<TreeElementFoo>(te);
```
The "cast" will return null if the tree-element doesn't match the
requested type.
This is useful for the transition from the C-style type to the new ones.
This uses a light parser / string modification pass to convert
C++ enum declaration syntax to GLSL compatible one.
GLSL having no support for enums, we are forced to convert the
enum values to a series of constant uints.
The parser (not really one by the way), being stupidly simple,
will not change anything to the values and thus make some C++
syntax (like omitting the values) not work.
The string replacement happens on all GLSL files on startup.
I did not measure significant changes in blender startup speed.
There is plans to do all of this at compile time.
We limit the scope of the search to `.h` and `.hh` files to prevent
confusing syntax in `.glsl` files.
There is basic error reporting with file, line and char logging
for easy debuggabiliy.
The requirements to use this enum sharing system are already listed in
`gpu_shader_shared_utils.h` and repeated on top of the preprocessor
function.
Remove small ray offsets that were used to avoid self intersection, and leave
that to the newly added primitive object/prim comparison. These changes together
significantly reduce artifacts on small, large or far away objects.
The balance here is that overlapping primitives are not handled well and should
be avoided (though this was already an issue). The upside is that this is
something a user has control over, whereas the other artifacts had no good
manual solution in many cases.
There is a known issue where the Blender particle system generates overlapping
objects and in turn leads to render differences between CPU and GPU. This will
be addressed separately.
Differential Revision: https://developer.blender.org/D12954
Caused by 0f89bcdbeb where it was needed for cage and evaluated mesh
to have same behavior in respect of having edit_mesh pointer assigned.
This change makes it so that edit_data is not implied to exist when the
edit_mesh pointer is not null. This was already the case in some other
code.
Those cases are almost always synptoms of either bug in code, or broken
files. Re-doin resync on them only costs time and causes extra trash
data as a result, without really helping in any way.
Both new normals (from rBb7fe27314b25) and vpaint (from rBf7bbc7cdbb6c)
RNA arrays were missing the `PROPOVERRIDE_IGNORE`. Those huge blobs of
geometry data should never be processed by liboverride code.
This enables support for node group assets. Previously, node group
assets only worked when the "extended asset browser" experimental
features is enabled.
Differential Revision: https://developer.blender.org/D13748
For node groups there is no good default preview generation.
Nevertheless, t would be useful to generate a preview image for a
node group by rendering an object in some cases.
This commit adds a new operator that allows updating the preview
image for the active asset by rendering the active object.
Note, the operator can also be used for other asset types, not just
node groups.
The operator can be found in a menu right below the refresh-preview
button. Currently it is the only operator in that menu. In the future,
more operators to create previews may be added.
Differential Revision: https://developer.blender.org/D13747
The VSE and node editor only uses an overlay buffer to draw to the screen. The
GPUViewport assumes that platforms clears all textures during creation, but
they do not on selected platforms. What would lead to drawing from
uncleared memory.
This patch fixes this by clearing all viewport textures during creation.
Also adds a few things to GPUShader for easily create shaders.
Heavy usage of macros to compose the createInfo and avoid
duplications and copy paste bugs.
This makes the link between the shader request functions
(in workbench_shader.cc) and the actual createInfo a bit
obscure since the names are composed and not searchable.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D13910
Continuation of work started in 2e221de4ce and 249e4df110.
Adds new tree-element classes for RNA structs, properties and array
elements. This isn't exactly a copy and paste, even though logic should
effectively be the same. Further cleanups are included to share code in
a nice way, improve code with simple C++ features, etc.
This fixes failing test cases when using `make test`.
See {D13615} for more information.
The fix will perform the id remapping one item at a time. Although not
really nice, this isn't a bottleneck.
The failing test cases is because space_node stores pointers multiple
times and didn't update all pointers. It was not clear why it didn't do
it, but changing the behavior more to the previous behavior fixes the
issue at hand.
I prefer to remove the double storage of the node tree pointers (in
snode and path) to reduce pointer management complexity.
During sprite fright loading of complex scenes would spend a long time in remapping ID's
The remapping process is done on a per ID instance that resulted in a very time consuming
process that goes over every possible ID reference to find out if it needs to be updated.
If there are N of references to ID blocks and there are M ID blocks that needed to be remapped
it would take N*M checks. These checks are scattered around the place and memory.
Each reference would only be updated at most once, but most of the time no update is needed at all.
Idea: By grouping the changes together will reduce the number of checks resulting in improved performance.
This would only require N checks. Additional benefits is improved data locality as data is only loaded once
in the L2 cache.
It has be implemented for the resyncing process and UI editors.
On an Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz 16Gig the resyncing process went
from 170 seconds to 145 seconds (during hotspot recording).
After this patch has been applied we could add similar approach
to references (references between data blocks) and functionality (tagged deletion).
In my understanding this could reduce the resyncing process to less than a second.
Opening the village production file between 10 and 20 seconds.
Flame graphs showing that UI remapping isn't visible anymore (`WM_main_remap_editor_id_reference`)
* Master {F12769210 size=full}
* This patch {F12769211 size=full}
Reviewed By: mont29
Maniphest Tasks: T94185
Differential Revision: https://developer.blender.org/D13615
This reverts commit 086f191169.
There was apparently a problem using APPEND which wasn't referenced
in the commit log.
Added comment noting the reason for the discrepancy.
Use more efficient logic for detecting when gizmos are under the cursor.
Even though this isn't a bottleneck, it runs on cursor motion in the
3D viewport, so avoiding any lag here is beneficial.
The common case for cursor motion without any gizmos was always
drawing two passes (one small, then again if nothing was found).
Now a single draw call at the larger size is used.
In isolation this gives around 1.2x-1.4x speedup.
When there are multiple gizmos a depth-buffer picking is used
(similar to object / bone selection) which is more involved but
still only performs 2x draw calls since the result is cached for reuse.
See note in gizmo_find_intersected_3d for a more detailed explanation.
Also restore the depth values in the selection result as they're
needed for gizmos to use selection bias.
Broken since support for GL_SELECT was removed.
Early on in 2.8x development gizmo-depth used GL_SELECT,
which has been removed. Bind the depth buffer so occlusion queries
use the front-most gizmo.
While this report only mentions face-maps, gizmo depth was ignored in
all cases. This wasn't noticeable in most cases though since the
transform gizmo for example was placed so gizmos didn't overlap.
When calling GPU_select_cache_begin, checking the selection mode used
the last used selection mode, not the one about to be used.
Using border select, then picking would not use the selection cache.
This wasn't noticeable by users as failing to use cache just completes
the selection without it (drawing the depth buffer unnecessarily).
The OSL image compilation step needed to be taught about the new UVTILE
format for UDIM textures.
A small missing feature from OIIO[1] means this is a bit uglier than it
needs to be. Once we update to a version of OIIO with the fix we can
remove the string replace part.
[1] 35cb6a83e2
Differential Revision: https://developer.blender.org/D13912
This was already done for APPLE & WIN32, which would
reference these libraries twice.
Now append BROTLI_LIBRARIES to FREETYPE_LIBRARIES when they're
required for linking.
No functional changes as all references to FREETYPE_LIBRARIES also
used BROTLI_LIBRARIES.
When LIBDIR existed, searching for system libraries would always
first search 'LIBDIR'.
This meant "WITH_SYSTEM_*" would still prefer LIBDIR versions of
libraries if they exist.
The presence of LIBDIR also ignored the setting for WITH_STATIC_LIBS
which is now restored to the cached value once pre-compiled libraries
have been handled.
Fix formula in function `SEQ_sound_update_length`.
Formula for sound strip length was changed in commit ded68fb102, when
strip is added to timeline, but it was not changed in function
mentioned above.
This change applies only for automatic proxy building, when strip
is added to timeline. Manual building process is not affected.
Don't build proxy file if movie is already fast enough to seek.
To determine seek performance, check if whole GOP can be decoded
in 100 milliseconds.
To consider some variation in GOP size, large number of packets are
read, assuming that each packet will produce 1 frame. While this is not
technically correct, it does give quite accurate estimate of maximum GOP
size.
This test will ensure consistent performance on wide array of machines.
Check should be done in order of few milliseconds.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11671
This will allow building most deps with VS2019
SDL has some linker issues that are resolved in
a newer version, but that would be better handled
in a separate change.
VS2013 and VS2015 support which was broken has
been removed.
In order to use a workaround builtin uniform, we need to count it
just like other uniforms and give it some space in the name buffer.
This also fixes extensions being added after the uniform declaration.
All `#extension` directives are now part of the gl backend.
This commit moves the weld modifier code to the geometry module
so that it can be used in the "Merge by Distance" geometry node
from ec1b0c2014. The "All" mode is exposed in the node
for now, though we could expose the "Connected" mode in the future.
The modifier itself is responsible for creating the selections from
the vertex group. The "All" mode takes an `IndexMask` for the
selection, and the "Connected" mode takes a boolean array,
since it actually iterates over all edges.
Some disabled code for a BVH mode has not been copied over,
it's still accessible through the patches and git history anyway,
and it made the port slightly simpler.
Differential Revision: https://developer.blender.org/D13907
Previously it was only part of experimental features in beta, however now
renderers can render point clouds generated by geometry nodes. Adding or
converting a point cloud object directly is still hidden by default, since
there is no good way to edit it.
This implements a merge by distance operation for point clouds.
Besides the geometry input, there are two others-- a selection
input to limit the operation to certain points, and the merge
distance. While it would be a reasonable feature, the distance
does not support a field currently, since that would make
the algorithm significantly more complex.
All attributes are merged to the merged points, with the values
mixed together. This same generic method is used for all attributes,
including `position`. The `id` attribute uses the value from the
first merged index for each point.
For the implementation, most of the effort goes into creating a
merge map to speed up attribute mixing. Some parts are inherently
single-threaded, like finding the final indices accounting for the
merged points. By far most of the time is spend balancing the
KD tree.
Mesh support will be added in the next commit.
Differential Revision: https://developer.blender.org/D13649
Only show options that are valid for the used device (CPU, GPU, Multi).
Note: The panel isn't shown for OPTIX anymore, unless Multi device is used.
Reference: https://developer.blender.org/D13592
Make the Embree RTC_SCENE_FLAG_COMPACT flag optional and enabled per default.
Disabling it makes CPU rendering a bit faster in some scenes at the cost of a higher memory usage.
Barbershop renders about 3% faster, victor about 4% on CPU with compact BVH disabled.
Differential Revision: https://developer.blender.org/D13592
Several sub commands tried on their own
to locate python, given I wanted to look
in several locations for a broader libdir
compatibility this is best done in a
central location.
Python 3.9 is still preferred, but if
3.10-3.12 are available that be accepted
as well.
note: this is about the python version
make.bat uses to run various python helper
scripts, this change has no influence on
the python version blender itself uses.
With (center) position, radius and random value outputs.
Eevee does not yet support rendering point clouds, but an untested
implementation of this node was added for when it does.
Ref T92573
Movies with variable frame rate can cause mismatch of displayed frame
when proxies are used. Since proxies are not used for rendering, this
means, that output may be different than expected. This problem can be
avoided when timecodes are used.
Set used timecode to Record Run. Timecodes are built with proxies at
the same time, therefore if proxies are built and used this will
resolve possible mismatch of output.
Record run is chosen, because it will show frames based on time they
were encoded by encoder and should match behavior as if movie was
played back at normal speed. This change is done only for new strips
in order to not overwrite user defined settings.
Other minor changes:
- When proxies are enabled, size 25% is no longer set by default. It was mostly annoying anyway.
- Silence warning when timecode file is not present. This was introduced in 4adbe31e2f.
Previously use of timecodes was hard-coded in sequencer and this error would spam console if timecodes would be
enabled by default and proxies would be never built.
ref: T95093
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D13905
Using a negative linesize to flip an image vertically is supported in
ffmpeg but not for every function.
This method treats frames that need and those that do not need alignment
the same. An RGBA frame buffer with alignment that ffmpeg decides is
optimal for the CPU and build options is allocated by ffmpeg.
The `sws_scale` does the colorspace transformation into this RGBA frame
buffer without flipping. Now the image is upside down and aligned.
The combined unaligning and vertical flipping is then done by
`av_image_copy_to_buffer` which seems to handle negative linesize
correctly.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D13908
Layer resync code would not yet fully properly deal with all possible
invalid status of ViewLayer comming from those older files.
Now put 2.80-doversion specific fixes into their own dedicated
function, so that they do not affect actual regular layer resync code
anymore. Also added some sanity-checks in main
`BKE_layer_collection_sync` code.
The Brotli library only needs to be explicitly linked when using the
statically linked libraries. When using system libs they're shared, and
the .so loading mechanism takes care of dependencies.
Currently the Boolean Math node only has 3 basic logic gates:
AND, OR, and NOT. This commit adds 6 additional logic gates
for convenience and ease of use.
- **Not And (NAND)** returns true when at least one input is false.
- **Nor (NOR)** returns true when both inputs are false.
- **Equal (XNOR)** returns true when both inputs are equal.
- **Not Equal (XOR)** returns true when both inputs are different.
- **Imply (IMPLY)** returns true unless the first input is true and
the second is false.
- **Subtract (NIMPLY)** returns true when the first input is true and
the second is false.
Differential Revision: https://developer.blender.org/D13774
ssize_t is a posix type pyconfig.h previously
supplied for MSVC, it appears to have stopped
doing this in the python 3.10 headers.
Py_ssize_t is the type of the field this macro
actually returns, so best to to use that in our
code as well.
This reverts commit 948211679f.
This commit introduced some regressions in the test suite.
As this change is a core part of blender Bastien and I decided to revert
it as the solution isn't clear and needs more investigation.
The following tests FAILED:
62 - blendfile_liblink (SEGFAULT)
63 - blendfile_library_overrides (SEGFAULT)
It fails in (id_us_ensure_real)
This makes optionnal the use of a different interface for the geometry
shader stage output. When the vertex and geometry interface instance name
matches, a `_in` and `_out` suffix is added to the end of the instance name.
This makes it easier to have optional geometry shader stages.
# Conflicts:
# source/blender/gpu/intern/gpu_shader_create_info.hh
During sprite fright loading of complex scenes would spend a long time in remapping ID's
The remapping process is done on a per ID instance that resulted in a very time consuming
process that goes over every possible ID reference to find out if it needs to be updated.
If there are N of references to ID blocks and there are M ID blocks that needed to be remapped
it would take N*M checks. These checks are scattered around the place and memory.
Each reference would only be updated at most once, but most of the time no update is needed at all.
Idea: By grouping the changes together will reduce the number of checks resulting in improved performance.
This would only require N checks. Additional benefits is improved data locality as data is only loaded once
in the L2 cache.
It has be implemented for the resyncing process and UI editors.
On an Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz 16Gig the resyncing process went
from 170 seconds to 145 seconds (during hotspot recording).
After this patch has been applied we could add similar approach
to references (references between data blocks) and functionality (tagged deletion).
In my understanding this could reduce the resyncing process to less than a second.
Opening the village production file between 10 and 20 seconds.
Flame graphs showing that UI remapping isn't visible anymore (`WM_main_remap_editor_id_reference`)
* Master {F12769210 size=full}
* This patch {F12769211 size=full}
Reviewed By: mont29
Maniphest Tasks: T94185
Differential Revision: https://developer.blender.org/D13615
This patch migrates the draw manager hair refine compute shader to use
GPUShaderCreateInfo.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D13915
Allows to perform correction of coordinate delta/displacement in a
similar way of how sculpt mode handles sculpting on a deformed mesh.
An example of usecase of this is allowing riggers and sciprters to
improve corrective shapekey workflow.
The usage consists of pre-processing and access. For example:
object.crazyspace_eval(depsgraph, scene)
# When we have a difference between two vertices and want to convert
# it to a space to be stored, say, in shapekey:
delta_in_orig_space = rigged_ob.crazyspace_displacement_to_original(
vertex_index=i, displacement=delta)
# The reverse of above.
delta_in_deformed_space = rigged_ob.crazyspace_displacement_to_deformed(
vertex_index=i, displacement=delta)
object.crazyspace_eval_clear()
Fuller explanation with actual usecases and studio examples are written in
the comment:
https://developer.blender.org/D13892#368898
Differential Revision: https://developer.blender.org/D13892
Brotli seems to add a custom postfix to its static libraries by default,
but in Debian at least libraries are just named the same for both shared
and static versions, as usual.
So add standard name after static-specific ones.
Follow-up to rB4c617c06e9cb and rBa000de7c2a4d.
The evaluated mesh is a result of evaluated modifiers, and referencing
other evaluated IDs such as materials.
It can not be stored in the EditMesh structure which is intended to be
re-used by many areas. Such sharing was causing ownership errors causing
bugs like
T93855: Cycles crash with edit mode and simultaneous viewport and final render
The proposed solution is to store the evaluated edit mesh and its cage in
the object's runtime field. The motivation goes as following:
- It allows to avoid ownership problems like the ones in the linked report.
- Object level is chosen over mesh level is because the evaluated mesh
is affected by modifiers, which are on the object level.
This patch allows to have modifier stack of an object which shares mesh with
an object which is in edit mode to be properly taken into account (before
the change the modifier stack from the active object will be used for all
objects which share the mesh).
There is a change in the way how copy-on-write is handled in the edit mode to
allow proper state update when changing active scene (or having two windows
with different scenes). Previously, the copt-on-write would have been ignored
by skipping tagging CoW component. Now it is ignored from within the CoW
operation callback. This allows to update edit pointers for objects which are
not from the current depsgraph and where the edit_mesh was never assigned in
the case when the depsgraph was evaluated prior the active depsgraph.
There is no user level changes changes expected with the CoW handling changes:
should not affect on neither performance, nor memory consumption.
Tested scenarios:
- Various modifiers configurations of objects sharing mesh and be part of the
same scene.
- Steps from the reports: T93855, T82952, T77359
This also fixes T76609, T72733 and perhaps other reports.
Differential Revision: https://developer.blender.org/D13824
The Equalize Handles operator allows users to make selected handle
lengths uniform: either respecting their original angle from the key
control point or by flattening their angle (removing the overshoot
sometimes produced by certain handle types).
Design: T94172
Reviewed by: sybren
Differential Revision: https://developer.blender.org/D13702
Some IDs (like text ones) can be linked and only kept around thanks to
editors, allow making such IDs local in `BKE_lib_id_make_local_generic`.
Also refactor logic checking whether ID should be made directly local or
copied into its own util function, so that we can remain sure all
special-cases 'make local' code still uses the same logic here.
Currently there are many function declarations in `BKE_node.h` that
don't actually have implementations in blenkernel. This commit moves
the declarations to `NOD_composite.h`, `NOD_texture.h`, and
`NOD_shader.h` instead. This helps to clarify the purpose of the
different modules.
Differential Revision: https://developer.blender.org/D13869
Fixes T93680
For current drivers of Intel HD Graphics 4400 and 4600, various Program Introspection functions appear broken and return incorrect values, causing crashes in the current handling of SSBOs. Disable use of this feature on those devices. Add checks to features that use SSBOs (Hair and Subdivision Modifier).
Reviewed By: fclem, jbakker
Maniphest Tasks: T93680
Differential Revision: https://developer.blender.org/D13806
The point IBO should only have data for coarse vertices (or in general,
the vertices in the original mesh). As it used for displaying the
vertices for selection in edit mode, and as it indexes into the VBOs for
the positions and edit data, it is itself only indexed by coarse/
original vertex index.
For the subdivision case, this would allocate space for the final
subdivision vertex and reallocate to make room for loose geometry,
although only the first coarse vertex count amount of data would be.
Now just allocate for the required memory. Also reuse index buffer APIs
instead of doing manual work.
unity launches blender in background mode to do some
file conversions, ever since the launcher got introduced
this process broke.
The root cause here is: Unity looks up the default program
to launch .blend files with, which is now the launcher, then
launches it in background mode with a script to export the data.
The launcher however was designed to exit as quickly as
possible so there would not be an extra background process
lingering. It does not wait for blender to exit and does not
pass back any error codes.
This broke unity's workflow since it assumed if the process
exits and succeeds the data *must* be ready for reading which
no longer holds true.
This change keeps the launcher design as was previously,
*except* when launching in background mode, then it
waits and passes back any error codes, thus restoring
unity's workflow.
Differential Revision: https://developer.blender.org/D13894
Reviewed by: LazyDodo, Brecht
Previously weight paint wasn't hooked up to the "Smooth" and "Invert" modes.
With this patch it is not possible to use the "Smooth" and "Invert"
modifiers for the draw keybindings.
Reviewed By: Campbell Barton
Differential Revision: http://developer.blender.org/D13857
Add `libbrotlidec-static.a` and `libbrotlicommon-static.a` to the CMake
`$FREETYPE_LIBRARIES` variable; they'll be required when the Linux libs
for the FreeType upgrade lands (D13448).
The order of libraries is different compared to the similar lines in the
Windows and Apple CMake files, to prevent linker errors on Linux.
Some drivers/glsl compilers will not warn about multiple resources using
the same binding, creating silent errors.
This patch checks for this case and outputs a descriptive error message if
a particular createInfo merge error is founds.
Other validation can be added later.
This patch introduces an extrude node with three modes. The vertex mode
is quite simple, and just attaches new edges to the selected vertices.
The edge mode attaches new faces to the selected edges. The faces mode
extrudes patches of selected faces, or each selected face individually,
depending on the "Individual" boolean input.
The default value of the "Offset" input is the mesh's normals, which
can be scaled with the "Offset Scale" input.
**Attribute Propagation**
Attributes are transferred to the new elements with specific rules.
Attributes will never change domains for interpolations. Generally
boolean attributes are propagated with "or", meaning any connected
"true" value that is mixed in for other types will cause the new value
to be "true" as well. The `"id"` attribute does not have any special
handling currently.
Vertex Mode
- Vertex: Copied values of selected vertices.
- Edge: Averaged values of selected edges. For booleans, edges are
selected if any connected edges are selected.
Edge Mode
- Vertex: Copied values of extruded vertices.
- Connecting edges (vertical): Average values of connected extruded
edges. For booleans, the edges are selected if any connected
extruded edges are selected.
- Duplicate edges: Copied values of selected edges.
- Face: Averaged values of all faces connected to the selected edge.
For booleans, faces are selected if any connected original faces
are selected.
- Corner: Averaged values of corresponding corners in all faces
connected to selected edges. For booleans, corners are selected
if one of those corners are selected.
Face Mode
- Vertex: Copied values of extruded vertices.
- Connecting edges (vertical): Average values of connected selected
edges, not including the edges "on top" of extruded regions.
For booleans, edges are selected when any connected extruded edges
were selected.
- Duplicate edges: Copied values of extruded edges.
- Face: Copied values of the corresponding selected faces.
- Corner: Copied values of corresponding corners in selected faces.
Individual Face Mode
- Vertex: Copied values of extruded vertices.
- Connecting edges (vertical): Average values of the two neighboring
edges on each extruded face. For booleans, edges are selected
when at least one neighbor on the extruded face was selected.
- Duplicate edges: Copied values of extruded edges.
- Face: Copied values of the corresponding selected faces.
- Corner: Copied values of corresponding corners in selected faces.
**Differences from edit mode**
In face mode (non-individual), the behavior can be different than the
extrude tools in edit mode-- this node doesn't handle keeping the back-
faces around in the cases that the edit mode tools do. The planned
"Solidify" node will handle that use case instead. Keeping this node
simpler and faster is preferable at this point, especially because that
sort of "smart" behavior is not that predictable and makes less sense
in a procedural context.
In the future, an "Even Offset" option could be added to this node
hopefully fairly simply. For now it is left out in order to keep
the patch simpler.
**Implementation**
For the implementation, the `Mesh` data structure is used directly
rather than converting to `BMesh` and back like D12224. This optimizes
for large extrusion operations rather than many sequential extrusions.
While this is potentially more verbose, it has some important benefits:
First, there is no conversion to and from `BMesh`. The code only has
to fill arrays and it can do that all at once, making each component of
the algorithm much easier to optimize. It also makes the attribute
interpolation more explicit, and likely faster. Only limited topology
maps must be created in most cases.
While there are some necessary loops and allocations with the size of
the entire mesh, I tried to keep everything I could on the order of the
size of the selection rather than the size of the mesh. In that respect,
the individual faces mode is the best, since there is no topology
information necessary, and the amount of work just depends on the size
of the selection.
Modifying an existing mesh instead of generating a new one was a bit
of a toss-up, but has a few potential benefits:
- Avoids manually copying over attribute data for original elements.
- Avoids some overhead of creating a new mesh.
- Can potentially take advantage of future ammortized mesh growth.
This could be changed easily if it turns out to be the wrong choice.
Differential Revision: https://developer.blender.org/D13709
When moving to C++ field for initialization was removed.
Favor assignments to field names as it reads better and avoids bugs if
files are ever re-arranged as well as mistakes (see T94784).
Note that the generated optimized output is identical with GCC11.
This adds a selection field input to the node, faces that are selected and
meet the minimum vertex count threshold will be triangulated.
Differential Revision: https://developer.blender.org/D13804
Add a boolean option to have the Curve Handle Position input node return the
position of the handle relative to each point position.
Differential Revision: https://developer.blender.org/D12947
A large polygon in the file from the report caused `alloca`
to exceed the maximum stack size, causing a crash. Instead
of using `alloca`, use `blender::Array` with an inline buffer.
Based on a patch by Germano Cavalcante (@mano-wii).
Differential Revision: https://developer.blender.org/D13898
When enabled, it will keep contour around the object instead of hide them by rule of face mark,
so the object can always have full contour while filtering out some of the feature lines inside certain regions.
Reviewed By: Antonio Vazquez (antoniov), Aleš Jelovčan (frogstomp)
Differential Revision: https://developer.blender.org/D13847
Option to discard back faced triangles, this speeds up calculation especially for when you only want to show visible feature lines.
Reviewed By: Antonio Vazquez (antoniov), Aleš Jelovčan (frogstomp)
Differential Revision: https://developer.blender.org/D13848
Instead of splitting it at each occlusion change, it tolerates short segments of "zig-zag" occlusion incoherence and doesn't split the chain at these points, thus creating a much smoother result.
Reviewed By: Antonio Vazquez (antoniov), Aleš Jelovčan (frogstomp)
Differential Revision: https://developer.blender.org/D13851
This gives a modest speedup as calculating tessellation and face
normals at the same time can be more efficiently multi-threaded.
Also avoids calculating face normals twice,
oversight in d590e223da.
This commit improves NURBS knot generation by adding proper support
for the combination of the Bezier and cyclic options. In other cases
the resulting knot doesn't change. This cyclic Bezier knot is used to
create accurate accurate "Nurbs Circle", "Nurbs Cylinder" primitives.
"Nurbs Sphere" and "Nurbs Torus" primitives are also improved by
tweaking the spin operator.
The knot vector in 3rd order NURBS curve with Bezier option turned on
(without cyclic) is changed in comparison to previous calculations,
although it doesn't change the curve shape itself.
The accuracy of the of NURBS circle is fixed, which can be checked by
comparing with mesh circle. Tessellation spacing differences in
circular NURBS is also fixed, which is observable with the NURBS
cylinder and sphere primitives. These were causing seam-like effects.
This commit contains comments from Piotr Makal (@pmakal).
Differential Revision: https://developer.blender.org/D11664
Normal layers currently aren't stored in the undo step
mesh storage, since they are not stored in files at all.
However, the edit mesh expects normals to be fully
calculated, and does not keep track of a dirty state.
This patch updates the normals in the BMesh created
by loading an undo step.
Another option would be calculating the normals on
the undo mesh first, which might be better if Mesh
normal calculation is faster than BMesh calculation,
but the preferred method to access vertex normals fails
in this case, because the mesh runtime mutexes are not
initialized for undo-state meshes.
Differential Revision: https://developer.blender.org/D13859
From an error in rBcfa53e0fbeed, the vertex normals in `SculptSession`
seem to be used, but in the case when no "pbvh" is used, the value of
the pointer is never assigned.
Normals were not generally dirty before this "ensure" function with
regular sculpting operations, so this addition shouldn't have any cost.
Differential Revision: https://developer.blender.org/D13854
All other nodes with data type and domain choices have the domain
below the data type. Generally that order makes sense, because it's
consistent with nodes that have no domain drop-down.
Because this operator is used on original objects, it's best to tag
the normals dirty instead of explicitly calculating them, to avoid
unnecessarily storing normal layers on an original object (since
they might have to be recalculated during evaluation anyway).
There may be other places this change is helpful, but being
conservative is likely better for now.
Related to T95125
The new OBJ exporter did not handle object instances.
The fix is to use a dependency graph iterator, asking for instances.
Unfortunately that iterator makes a temporary copy of instance objects
that does not persist past the iteration, but we need to save all the
objects and meshes to write later, so the Object has to be copied now.
This changed some unit tests. Even though the tests don't have instancing,
the iterator also picks up some Text objects as Mesh ones (which is a good
thing), resulting in two more objects in the all_objects.obj file output.
With object collection properties open there was a huge delay when
switching active objects in a large scene, (~10k objects, ~5m vertices).
This is due to a non-optimal function to query all the collections the object is in.
To solve this the code can be simplified by using `bpy.types.Object.users_collection`
This returns all the collections the object is in removing the need to compute this in python.
The UI team requested adding woff2 support to freetype.
this required a new dependency brotli.
This changes adds brotili to the builder and bumps
freetype to version 2.11.0
As freetype now depends on other libraries, for consistency
all use of ${FREETYPE_LIBRARY} in cmake has been updated to
use ${FREETYPE_LIBRARIES} adjustments have been made in the
windows platform file, all other platforms use cmake's
FindFreeType.cmake which already sets this variable.
reviewed by: brecht
Differential Revision: https://developer.blender.org/D13448
This node can scale individual edges and faces. When multiple selected
faces/edges share the same vertices, they are scaled together.
The center and scaling factor is averaged in this case.
For some examples see D13757.
Differential Revision: https://developer.blender.org/D13757
Currently there is no way to flip normals in geometry nodes. This node
makes that possible by flipping the winding order of selected faces.
The node is purposely not called "Flip Normals", because normals are
derived data, changing them is only a side effect. The real change is
that the vertex and edge indices in the face corners of every selected
polygon are reversed, and face corner attribute data is reversed.
While there are existing utilities to flip a polygon and its custom
data, this node aims to process an attribute's data together instead
of processing all attributes separately for each index.
Differential Revision: https://developer.blender.org/D13809
Adds a second output to the Mesh Islands node that shows the total
number of islands as a field.
Differential Revision: https://developer.blender.org/D13700
This is not currently working, with an internal compiler error. However
we are currently using BVH2 instead of Metal RT. So this has no effect for
users, it's being committed to avoid the code getting outdated.
Ref T92573, T92212
Differential Revision: https://developer.blender.org/D13632
This shader needs to use the same interface as the OCIO shader. On Linux
and Windows this seems to be the case. On MacOS however there is a
mismatch that makes the overlay texture to be completely black when
switching to workbench in the Shader workspace.
This is just a temporarily work-around as this should be solved. Due to
the poor GPU debugging facilities on Mac we haven't been able to
pin-point the root cause.
Editing of generic attributes on the original objects in edit modes is
still very limited. However, when applying a geometry nodes modifier
that generates new attributes. These attributes will show up in the
Attributes panel.
Currently, our exporters are not capable of exporting generic attributes.
Therefore, for the time being, a work around is to apply geometry nodes
and then convert a generic attribute to a task specific attribute like a
uv map, vertex group or vertex color layer. Once more parts of Blender
support generic attributes, this will become less important.
Currently, only meshes are supported by the operator. However, it would
be relatively easy to extend it to other geometry types.
Differential Revision: https://developer.blender.org/D13838
2022-01-21 12:47:35 +01:00
6768 changed files with 65522 additions and 132185 deletions
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
