Fix possible overflow of Modifier UUID
The code prior this change was re-generating modifier's session UUID
prior to copying this id from the source. This approach has a higher
risk of modifiers session UUID to overflow and start colliding with
existing modifiers.
This change makes it so that modifier copy does not re-generated the
session UUID unless it is needed.
Differential Revision: https://developer.blender.org/D14125
GLUT does not support offscreen contexts, which is required for the new
display driver. So we use SDL instead. Note that this requires using a
system SDL package, the Blender precompiled SDL does not include the video
subsystem.
There is currently no text display support, instead info is printed to
the terminal. This would require adding an embedded font and GLSL shaders,
or using GUI library.
Another improvement to be made is supporting OpenColorIO display transforms,
right now we assume Rec.709 scene linear and display.
All OpenGL, GLEW and SDL code was move out of core cycles and into
app/opengl. This serves as a template for apps that want to integrate
Cycles interactive rendering, with a simple OpenGLDisplayDriver example.
In general this would be adapted to the graphics API and color management
used by the app.
Ref T91846
Due to recent changes there have been reports of incorrect loading of
GPU textures. This fix reverts a part of {D13238} that might be the
source of the issue.
This does not happen with **any** image, but with images that have ID
properties.
ID properties are used to store view projection matrices (e.g. for
reprojection with `Image from View` or `Quick Edit` -- these are the
ones we are interested in), but of course they can be used for anything
else, too. The images in the file from the report have ID properties from
an Addon for example.
So the crash can reliably be reproduced with **any** image doing the
following:
```
bpy.data.images['myImage']['myIDprop'] = "foo"
```
This would lead code in `texture_paint_camera_project_exec` to think the
needed `view_data` is on the image (but in reality it was just some
other IDprop).
Solution is simple: just check `view_data` is really valid after getting
it from the IDprops.
Maniphest Tasks: T95787
Differential Revision: https://developer.blender.org/D14116
Having this setting stored in the image space caused low level selection
logic to have to pass around the image space (which could be NULL
in some cases). Use the tool-settings instead since there doesn't seem
to be much/any advantage in having this setting per-space.
Although rB56407432a6a did fix missing subdivision in some cases, in
other cases it did not return the mesh wrapper (like when using
autosmooth, which requires a copy of the mesh), so the non-subdivided
mesh was still returned.
Not all coarse vertices were used to compute the center value (off by
one), and the interpolation for the current would always start at the
base corner for the base face instead of the base corner for the current
patch.
This patch reverses the dependency between `BLI_math_vec_types.hh` and
`BLI_math_vector.hh`. Now the higher level `blender::math` functions
depend on the header that defines the types they work with, rather than
the other way around.
The initial goal was to allow defining an `enable_if` in the types header
and using it in the math header. But I also think this operations to types
dependency is more natural anyway.
This required changing the includes some files used from the type
header to the math implementation header. I took that change a bit
further removing the C vector math header from the C++ header;
I think that helps to make the transition between the two systems
clearer.
Differential Revision: https://developer.blender.org/D14112
This commit renames `mesh_validate.cc` to `mesh_calc_edges.cc`.
I would like to move `mesh_validate.c` to C++, but it makes sense to
keep this specific algorithm in a smaller file.
When running `./blender/build_files/build_environment/install_deps.sh` on Ubuntu 20.04.3 LTS the following error can be seen:
```
./blender/build_files/build_environment/install_deps.sh: line 1266: [: too many arguments
```
This error results from the call:
```
check_package_version_ge_DEB $CLANG_FORMAT $CLANG_FORMAT_VERSION
```
with `CLANG_FORMAT_VERSION` being undefined.
Also as `clang-format` 13 is already released and hopefully didn't break anything `CLANG_FORMAT_VERSION_MEX` could use version bump.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D13924
This adds a new sculpt mode to the experimental new curves object.
Currently, this mode can only be entered and exited, nothing else.
The main initial purpose of this node will be to use it for hair grooming.
The patch also adds the `editors/curves/` directory for the new curves
object, which will be necessary for many other things as well.
I added a completely new mode (`OB_MODE_SCULPT_CURVES`), because
`OB_MODE_SCULPT` seems to be rather specific to meshes, and reusing
it doesn't seem worth the trouble. The tools/brushes used in mesh vs.
curves sculpt mode are quite distinct as well.
I had to add DNA_userdef_enums.h to make the patch compile with C++
(forward declaration of enums isn't allowed). This follows the same
pattern that we use for other enums in dna.
Differential Revision: https://developer.blender.org/D14107
The path calculation method for animation players: frame-cycler, rv &
mplayer would fail when the number of digits exceeded the range of a
32bit int causing RenderData.frame_path() to raise a ValueError.
Use a simpler method of extracting the range that uses the sign to
detect the beginning of the number.
Since the output file stays unmodified for most developer builds,
install step installed it redundantly.
Create readme.html using `configure_file`:
- Now it's modified only if final output changes (handled by CMake).
- If input file (from git) or blender version changes,
it //will// be modified.
Also don't re-implement what CMake can do.
Reviewed By: campbellbarton, LazyDodo
Differential Revision: https://developer.blender.org/D13863
- Increment the argument index at the end of the loop.
Otherwise using the index after incrementing required subtracting 1.
- Move error prefix creation into a function: `pyrna_func_error_prefix`
so it's possible to create an error prefix without duplicate code.
This simplifies further changes for argument parsing from D14047.
This is meant to complement the `blender::math` functions recently
added by D13791. It's sometimes desired to template an operation to work
on vector types, but also basic types like `float` and `int`. This patch
adds that ability with a new `BLI_math_base.hh` header. Particularly
useful examples are `midpoint` and `interpolate`, but I'm sure others
will be added in the future.
Implementing the functions separately, rather than as `if constexpr`
branches in the existing header is meant to be more scalable, for
the possibility of even more math types in the future.
This patch reverses the dependency between `BLI_math_vec_types.hh` and
`BLI_math_vector.hh`. Now the higher level `blender::math` functions
depend on the header that defines the types they work with, rather than
the other way around.
This required changing the includes some files used from the type
header to the math implementation header. I took that change a bit
further removing the C vector math header from the C++ header;
I think that helps to make the transition between the two systems
clearer.
Set "view2d_edge_pan" to true for the NODE_OT_translate_attach operator,
which is used by the duplication operator. This is done in the keymap so
that it's not hard-coded.
Differential Revision: https://developer.blender.org/D13934
The root issue was caused by a mistake in modifier copy data which was
wrongly re-generating source modifier data identifier.
The c8cca88851 simply exposed a bug in code which always was there
since the modifiers session UUID was introduced.
Shows an importance of const qualifier :)
Since now we delegate the evaluation of the last subsurf modifier in the stack
to the draw code, Cycles does not get a subdivided mesh anymore. This is because
the subdivision wrapper for generating a CPU side subdivision is never created
as it is only ever created via `BKE_object_get_evaluated_mesh` which Cycles does
not call (rather, it accesses the Mesh either via `object.data()`, or via
`object.to_mesh()`).
This ensures that a subdivision wrapper is created when accessing the object data
or converting an Object to a Mesh via the RNA/Python API.
Reviewed by: brecht
Differential Revision: https://developer.blender.org/D14048
This is requested by artist for some animation styles where is necessary to fill the area, but create a gap between fill and stroke.
Also some code cleanup and fix a bug in dilate for top area.
Reviewed By: pepeland, mendio
Differential Revision: https://developer.blender.org/D14082
The crash is caused as we did not check that the RNA pointer is null
before trying to use it. This moves the existing checks from the
modifier panels into the template functions so the logic is a bit
centralized.
The issue has two causes: on one hand origin indices were not handled
properly, on the other hand the extraction type (Mesh, BMesh, or mapped)
was not detected correctly.
For the second case reuse the MeshRenderData creation from the coarse
code path so that we make the same decisions. Loose geometry extraction
had to be updated to properly handle the BMesh cases.
For the origin indices, in some cases (for edges and faces), the arrays
used by the subdivision code already have the origin indices baked into
them, so mapping them a second time through the origin index layer is
wrong, and could cause out of bounds accesses.
For vertices especially, we would use two arrays: one for mapping
subdivision vertices to coarse vertices, and another one to map coarse
vertices to subdivision loops used for the selection index buffer. The
second one is now removed (which saves a bit of memory) as it is did not
have the proper data setup for use with the origin indices and we can
easily compute it using the first array anyway.
Fix segfault when calling `some_id.id_properties_ui("propname").update()`,
i.e. call the `update()` function without any keyword arguments. In such
a case, Python passes `kwargs = NULL`, but `PyDict_Contains()` is not
`NULL`-safe.
The Viewer marked the gpu texture to be out of date. But it should have used
the mark_full_update as the gpu textures
are only used by the render/draw engines.
The image/node editor uses the image engine that have its own GPU textures.
Currently one a single texture slot is used to update the screen.
Current design is implemented to use multiple textures.
for now limit the number of texture slots to 1.
This node is a bit of a weird case, because it uses the value stored in an
output socket as an input. So when we want to determine if the Dot
changed, we also have to check if the Normal output changed.
A cleaner solution would be to refactor this by either storing the normal
on the node directly (instead of in an output socket), or by exposing it
by a separate input. This refactor should be done separately though.
Currently whenever gl queries are performed for the viewport, a large
1024 byte array is allocated to store the query results (256 of them).
Unfortunately, if any gizmo using a `draw_select` callback is active
(e.g. the transform gizmos), these queries (and allocations) will occur
during every mouse move event.
Change the vector to allow for up to 16 query results before making an
allocation. This provides enough space for every built-in gizmo except
Scale Cage (which needs 27 queries). It also removes unnecessary
allocations from two other related vectors used during query processing.
Differential Revision: https://developer.blender.org/D13784
This is a regression partially introduced in rB0a6f428be7f0.
Bones being transformed into edit mode were snapping to themselves.
And the bones of the pose mode weren't even snapping.
(Curious that this was not reported).
This fix avoid the drif checking if the previous position is equals to new one, in this case, the pen has not moved and can be canceled.
Differential Revision: https://developer.blender.org/D13870
The animation playback did not take into account individual stereoscopic views.
This patch fixes this by playing back the active view render.
Reviewed By: campbellbarton
Maniphest Tasks: T91423
Differential Revision: https://developer.blender.org/D14070
Workaround for a compilation issue preventing kernels compiling for AMD GPUs: Avoid problematic use of templates on Metal by making `gpu_parallel_active_index_array` a wrapper macro, and moving `blocksize` to be a macro parameter.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D14081
A zero length vector was normalized and the resulting NaN used in further calculations.
This caused trouble on some compilers when using fast math.
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D14058
* Apple Silicon support enabled on macOS 12.2+
* AMD support enabled on macOS 12.3+
This patch also fixes a device enumeration crash on certain AMD configs which
was caused by over-release of MTLDevice objects.
Differential Revision: https://developer.blender.org/D14090
Improve the nodes' drop shadow by making it scale with the view
and replace the loop for the alpha calculation with something more
explicit.
The amount of drop shadow softness was scaled with the zoom level
and therefore had a fixed screen space size. DPI and UI scale
weren't taken into account either. This patch fixes both issues by
basing the shadow softness on the `widget_unit` that scales correctly
in zoomable views and takes UI scale etc. into account.
Differential Revision: https://developer.blender.org/D13356
* Replace license text in headers with SPDX identifiers.
* Remove specific license info from outdated readme.txt, instead leave details
to the source files.
* Add list of SPDX license identifiers used, and corresponding license texts.
* Update copyright dates while we're at it.
Ref D14069, T95597
Drivers make it way too easy to create dependenciy loops between IDs, so
need to use the same trick as in other dependency-following code in this
file to prevent those infinite loops.
hard to predict for sure how bad of a hierarchy root this can end up
producing, but in general cases think this should be OK.
The rbit instruction is only available starting with ARMv6T2 and
the register prefix is different from what AARCH64 uses.
Separate the 32 and 64 bit ARM branches, add missing ISA checks.
Made sure the code works as intended on macMini with Apple silicon,
and on Raspberry Pi 4 B running 32bit Raspbian OS.
Differential Revision: https://developer.blender.org/D14056
Reduce compute effort of liboverrides resync process by only re-syncing
the parts of the override hierarchy that actually need it.
The main change compared to existing code (which was systematically resyncing
a whole override hierarchy), is that resyncing now operates over several
sub-hierarchies at once, each defined by their own 'resync root' ID.
This ensures that we do not get several new overrides for the same data inside
of the same hierarchy.
Implements T95682.
Differential Revision: https://developer.blender.org/D14079
This patch increases the performance when remapping data.
{D13615} introduced a mechanism to remap multiple items in a single go.
This patch uses the same mechanism when remapping data inside ID datablocks.
Benchmark results when loading the village scene of sprite fright on AMD Ryzen 7 3800X 8-Core Processor
Before this patch 115 seconds
When patch applied less than 43 seconds
There is still some room for improvement by porting relink code.
Reviewed By: mont29
Maniphest Tasks: T95279
Differential Revision: https://developer.blender.org/D14043
Adds helper functions to debug IDRemapper data structure.
`BKE_id_remapper_result_string` converst a given IDRemapperApplyResult
to a readable form for logging purposes.
`BKE_id_remapper_print` prints out the rules inside a IDRemapper struct.
Instead of creating and destroying threads when starting and stopping renders,
keep a single thread alive for the duration of the session. This makes it so all
display driver OpenGL resource allocation and destruction can happen in the same
thread.
This was implemented as part of trying to solve another bug, but it did not
help. Still I prefer this behavior, to eliminate potential future issues wit
graphics drivers or with future Cycles display driver implementations.
Differential Revision: https://developer.blender.org/D14086
For reasons unclear, destroying and then recreating a vertex buffer in the
render OpenGL context is affecting the immediate mode vertex buffer in the
draw manager OpenGL context.
Instead just create a single vertex buffer and use it for the lifetime of
the render OpenGL context. There's not really any need to have a separate
one per tile as far as I can tell.
Differential Revision: https://developer.blender.org/D14084
This adds support for exporting attributes from a Blender Curves object to Cycles.
The implementation follows that of the Mesh object. This also creates motion blur
data if the "velocity" attribute is present on the Curves.
Ref T94193
Reviewed By: brecht
Maniphest Tasks: T94193
Differential Revision: https://developer.blender.org/D14088
Due to the freeing and re-creation of textures performed when binding
offscreen viewports, VR viewport textures would be needlessly
re-created every drawing iteration, leading to a negative impact on VR
frame rate.
This was brought to light by 6738ecb64e, which introduced an
additional texture clear operation on initialization and was
prohibitively costly on some systems when performed every frame.
Now, the textures for VR viewports will not be always re-created
during offscreen binding, but only when necessary using a pre-drawing
step (`wm_xr_session_surface_offscreen_ensure()`).
Reviewed By: jbakker, fclem
Differential Revision: https://developer.blender.org/D14059
When using a RGBA16 (`GL_RGBA16`, `DXGI_FORMAT_R16G16B16A16_UNORM`)
swapchain format with Quest 2, no image is presented to the headset.
This can occur when using the SteamVR runtime with an AMD graphics card
(ex. T95374).
Workaround is to move this format after the Quest 2-compatible RGBA16F
formats in the candidates list so that the RGBA16F formats are chosen
instead.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D14024
Crash was caused since the function pointers
`s_xrGetOpenGLGraphicsRequirementsKHR_fn`/
`s_xrGetD3D11GraphicsRequirementsKHR_fn` were static and were not
updated with the correct proc address after being set the first time.
As stated in the OpenXR spec: "function pointers returned by
xrGetInstanceProcAddr using one XrInstance may not be valid when used
with objects related to a different XrInstance".
Although it would seem reasonable that the proc address would not
change if the instance was the same (hence the `static XrInstance s_instance;`),
in testing, repeated calls to `xrGetInstanceProcAddress()`
with the same instance still can result in changes (at least for the
SteamVR runtime) so the workaround is to simply set the function pointers
every time, essentially trivializing their `static` designations.
Reviewed By: Severin
Maniphest Tasks: T94268
Differential Revision: https://developer.blender.org/D14023
For the majority of node groups created in Blender 3.0 the behavior does not change.
So far we only found a single file where this setting has an effect.
Differential Revision: https://developer.blender.org/D14078
For an upcoming project we would want to match multiple id types in a
single go. To not replicate the implementation using other types we
introduce `BKE_library_id_can_use_filter_id` that returns all supported
types as a filter.
Not all ID types have a filter_id (ID_LI, ID_KE, ID_SCR) These
exceptions are not available in the filter_id function.
Reviewed By: mont29
Maniphest Tasks: T95279
Differential Revision: https://developer.blender.org/D14061
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
Complex Solidify creates edge bevel weights on the rim if the
according vertex has some vertex bevel weight. If there are no
edge bevel weights, they were left disabled even if vertex bevel
weights are used.
Some curve objects don't have an evaluated mesh at all, but line art
currently assumes that all curve objects have one before converting
it to a mesh internally. Fix this by checking if the curve object has an
evaluated mesh before skipping it.
The remaining problem is that evalauted from non-mesh objects or
evaluated curves from non-curve objects, etc. will be ignored if
"Allow Duplicates" is off. That's a different problem though.
Differential Revision: https://developer.blender.org/D14036
For curve-heavy scenes, memory consumption regressed when we switched from MetalRT to bvh2. Allow users to opt in to MetalRT to workaround this.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D14071
Disable binary archives on Apple Silicon (issue stems from instancing multiple PSOs from the same binary archive). Pipeline creation still filters through the OS shader cache, mitigating any impact on setup times after the initial render.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D14072
This is part of the project of converting `MVert` into `float3`.
(more details in T93602), The pbvh update flag is removed and
replaced with a bitmap stored in the PBVH structure. This
patch is similar to D13878. This is mainly setup for an eventual
performance improvement by removing the extra data from
mesh vertices, but if it's consistent with testing in the other patch
doing the same thing for another "temp tag", then it may actually
increase the speed of sculpt code slightly, since less memory needs
to be loaded when checking/changing the flags.
Differential Revision: https://developer.blender.org/D14000
The main issue is that the image and image user is not updated correctly
in `rna_ImageUser_update`. `BKE_image_user_frame_calc` does not set the
correct frame, because the image is null. Also `IMA_GPU_REFRESH` is not
set for the same reason.
When gpu materials are first created, it is expected that the frame is set
correctly, and the flag is set if necessary. Therefore, somewhere during
depsgraph evaluation, those have to be updated. The depsgraph node
to do the update existed already. Now there is a new relation so that it is
executed when the node tree changed, not only when the frame changed.
This is partially caused by a stupid mistake in cfa53e0fbe
where I missed initializing the `vert_normals` pointer in
`MResolvePixelData`. It's also caused by questionable assumptions
from DerivedMesh code that vertex normals would be valid.
The fix used here is to create a temporary mesh with the data necessary
to compute vertex normals, and ensure them here. This is used because
normal calculation is only implemented for `Mesh` and edit mesh, not
`DerivedMesh`. While this might not be great for performance, it's
potentially aligned with future refactoring of this code to remove
`DerivedMesh` completely. Since this is one of the last places the data
structure is used, that would be a great improvement.
Differential Revision: https://developer.blender.org/D13960
While applying liboverrides on linked data, RNA code (in
`rna_property_override_check_resync`) would detect a lot of false positive
regarding IDs needing resync, because the temporary ID used to apply
overrides was always local, breaking the libraries comparison check.
NOTE: that whole 'apply liboverrides' code could use some refreshment,
it did not change much from initila version several years ago, we now
have better tools and control over non-main data.
But for now the 'trick' in that commit should do the job, ultimately
those temps IDs should never be put in Main at all.
The crash was happening when the mesh had loose edges.
Loose edges are not part of OpenSubdiv topology and hence should not be
communicated to the refiner. Pass ta boolean flag indicating whether an
edge is loose or not in the mesh foreach routines, which seems to be
the easiest way.
Decouple the reference (linked) root ID and the hierarchy (override) root ID.
Previous code was assuming that the reference ID was always also tagged
for override creation, which is true in current master, but cannot be
assumed in general (and won't be true with partial resync anymore).
Also add asserts to validate conditions that the reference/hierarchy_root
variables must meet.
There are two things achieved by this change:
- No possible downcast of size_t to int when calculating motion steps.
- Disambiguate call to `min()` which was for some reason considered
ambiguous on 32bit platforms `min(int, unsigned int)`.
- Do the same for the `max()` call to keep them symmetrical.
On an implementation side the `min()` is defined for a fixed width
integer type to disambiguate uint from size_t on 32bit platforms,
and yet be able to use it for 32bit operands on 64bit platforms without
upcast.
This ended up in a bit bigger change as the conditional compile-in of
functions is easiest if the functions is templated. Making the functions
templated required to remove the other source of ambiguity which is
`algorithm.h` which was pulling min/max from std.
Now it is the `math.h` which is the source of truth for min/max.
It was only one place which was relying on `algorithm.h` for these
functions, hence the choice of `math.h` as the safest and least
intrusive.
Fixes 32bit platforms (such as i386) in Debian package build system.
Differential Revision: https://developer.blender.org/D14062
This implements the update cache described in T95401.
The cache is currently only used for drawing strokes and
sculpting (using the push brush).
**Note: Making use of the cache throughout grease pencil will
have to be done incrementally in other patches. **
The update cache stores what elements have changed in the
original data-block since the last time the eval object
was updated. Additionally, the update cache can store multiple
updates to the data and minimizes the number of elements
that need to be copied.
Elements can be tagged using `BKE_gpencil_tag_full_update` and
`BKE_gpencil_tag_light_update`. A full update means that the element
itself will be copied but also all of the content inside. E.g. when a
layer is tagged for a full update, the layer, all the frames inside the
layer and all the strokes inside the frames will be copied.
A light update means that only the properties of the element are copied
without any of the content. E.g. if a layer is tagged with a light
update, it will copy the layer name, opacity, transform, etc.
When the update cache is in use (e.g. elements have been tagged) then
the depsgraph will not trigger a copy-on-write, but an update-on-write.
This means that the update cache will be used to determine what elements
have changed and then only those elements will be copied over to the
eval object.
If the update cache is empty or the data block was tagged with a full
update, we always fall back to a copy-on-write.
Currently, the update cache is only used by the active depsgraph. This
is because we need to free the update cache after an update-on-write so
it's reset and we need to make sure it is not freed or read by other
depsgraphs.
Co-authored-by: @yann-lty
This patch was contributed by The SPA Studios.
Reviewed By: sergey, antoniov, #dependency_graph, pepeland, mendio
Maniphest Tasks: T95401
Differential Revision: https://developer.blender.org/D13984
Simple upgrade of OpenXR to 1.0.22, following the steps from
https://wiki.blender.org/wiki/Source/OpenXR_SDK_Dependency and
rBb69ab42982a1. No changes to Blender code were necessary, only a version
bump.
The primary motivation for this upgrade is to utilize the
`XR_HTCX_vive_tracker_interaction` extension introduced in ver. 1.0.20.
However, the latest release (1.0.22) also adds a number of potentially
useful extensions such as:
- `XR_FB_render_model`
- `XR_HTC_facial_expression`
- `XR_HTC_vive_focus3_controller_interaction`
Ref T95206
Reviewed By: LazyDodo, sybren, mont29
Maniphest Tasks: T95206
Differential Revision: https://developer.blender.org/D13950
Turn off "Sync Length" when splitting an NLA strip.
The NLA Strip-Action Clip has a setting called "Sync Length" that is on
by default and helps to update the length of the clip to the current
actions keyframes so the strip shows the entire actions stored
animation.
When you split one of these strip-action clips in the NLA to trim it
shorter or to move it somewhere else in the NLA tracks to blend or work
with, the "Sync Length" setting stays checked on. You can have many
strips in the NLA that all look to the same action, if you split one
strip , you now have two strips showing or linked to the same action.
To see or edit keyframes on a strip, you enter tweak mode. When you exit
tweak mode, if "Sync Length" is active on the strip-action clip
settings, the strip length is changed/reset to match the action keys.
When you have many clips, this causes all of them to evaluate and update
no matter where they are in the NLA. This destroys/undoes all the user
work to trim down and place the clips in the NLA.
**Description of the proposed solution:**
This patch/change would turn off, the "Sync Length" setting when the
split tool was used on a strip/action clip to help protect the users
choice to trim and keep the clip that length. It doesn't change the
ability to turn the setting back on or off, it just makes sure that the
user doesn't accidentally or unknowingly loose work.
The same process happens when an action is created that has a "manual
range" set that is different than the length of the actions start-end
keyframes. It makes sense to do the same thing for the split tool.
**Alternative solutions:**
While the user could know this and turn off this setting by hand, it is
easy to forget and or the user might think that it only happened to the
one clip they were editing and not realize it happened to all the
trimmed versions, changing the users choice without the user knowing it
happened.
**Limitations of the proposed solution:**
It only fixes the split tool, if another tool was created and some how
impacted the clip length we would need to have that tool also take the
sync length into account.
Reviewed By: sybren
Maniphest Tasks: T84486
Differential Revision: https://developer.blender.org/D10168
From a strict language point of view the code required a braces around
`trgba` initialization. But it is easier to rely on the fact that fields
which are not specified are zero-initialized.
Under some circumstances, simply adding a curve object and going
to edit mode would cause a crash. This is because the evaluated
`CurveEval` was accessed but also freed by the dependency graph.
The fix reverts the part of b76918717d that uses the
`CurveEval` for the curve object bounds. While this isn't ideal,
it was the previous behavior, and some unexpected behavior
with object bounds is much better than a crash. Plus, given the plans
of using the new "Curves" data-block for evaluated curves, this
situation will change relatively soon anyway.
Strip aligning wasn't done when length of 2 strip is equal, but since
these strips are aligned according to position in stream this can
produce offset.
There are two things achieved by this change:
- No possible downcast of size_t to int when calculating motion steps.
- Disambiguate call to min() which was for some reason considered
ambiguous on 32bit platforms `min(int, unsigned int)`.
On an implementation side the `min()` is defined for a fixed width
integer type to disambiguate uint from size_t on 32bit platforms,
and yet be able to use it for 32bit operands on 64bit platforms without
upcast.
Fixes 32bit platforms (such as i386) in Debian package build system.
Differential Revision: https://developer.blender.org/D13992
Added a new "Sharpen Less" kernel to the filter compositor node. The intent here is to provide a much less aggressive sharpening filter that can't simply be solved by toning down the factor on the existing sharpen filter.
The existing "Sharpen" filter uses a "box" kernel:
```
-1 -1 -1
-1 9 -1
-1 -1 -1
```
The new "Sharpen Less" filter uses a "diamond" kernel:
```
0 -1 0
-1 5 -1
0 -1 0
```
The difference between the two is clear to see in the following side-by-side:
{F12847431}
Below shows the difference between the filtering kernels as applied to a B&W render of Suzanne with the UV grid as a texture. The left side of the render using the existing "Sharpen" filter, and the right side showing the new "Sharpen Less" filter. Notice that the left side is more aggressive in accentuating localized contrasts across the image. This can lead to what appears to be aliasing or striations in the resulting image:
{F12847429}
https://developer.blender.org/T95275https://blender.community/c/rightclickselect/57Kq/?sorting=hot
{F12847428}
Reviewed By: #compositing, jbakker
Differential Revision: https://developer.blender.org/D14019
This is almost always meaningless as most code has changed
since the comment was added. Besides this, version control can be used
to check if/when a file was modified.
Some cases of this were kept when they contain details
about the original copyright holder.
Order copyright immediately after the license block,
this was done almost everywhere with a few exceptions.
Remove authors from a few files (we had already removed "Contributors"
section however with old patches being applied this gets added back in).
Also move descriptive text into the doxygen comment block under \file.
In some cases remove the text as it was accidentally copied.
GHOST_ISystem::toggleConsole had a somewhat misleading name
it could be fed 4 different values, so it was not as much a
toggle as a set console window state.
This change renames `toggleConsole` to a more appropriately
named `setConsoleWindowState` and replaces the integer it had
to an enum so it's easy to tell what is being asked of it at
the call site.
Reviewed By: LazyDodo
Differential Revision: https://developer.blender.org/D14020
Symmetrize Armature now also symmetrizes the transform of custom bone
shapes.
Adds a new property to `bpy.ops.armature.symmetrize`:
//Parameters//:
- **direction **(enum in ['NEGATIVE_X', 'POSITIVE_X'], (optional)) –
**Direction**, Which sides to copy from and to (when both are selected)
- **custom_shape **(enum in ['SYMMETRIZE_SAME', 'SYMMETRIZE_ALL',
'SYMMETRIZE_NONE'], (optional)) – **Custom Shapes**, Wether to
symmetrize non symmetric custom bone shapes, all custom shapes, or
none at all
//Rationale//:
Reviewed By: #animation_rigging, Mets, sybren
Maniphest Tasks: T91871
Differential Revision: https://developer.blender.org/D13416
Add files with extension ".woff" and ".woff2" to FILE_TYPE_FTFONT
file type. Allows selecting and using these types of font files.
See D13822 for more details.
Differential Revision: https://developer.blender.org/D13822
Reviewed by Campbell Barton
Avoid using the uint64_t as an intermediate cast since it complicates
behavior for signed types (which first need to be cast to an int64_t).
Assign both old_value_i & old_value_f from the original value to avoid
the need for different handling of signed/unsigned types.
Reviewed By: JacquesLucke
Ref D14039
A Bump node without a Height input is meaningless and does nothing.
As such, it is available as an old workaround that allows making Node
Group inputs that default to normal when not connected, by routing
via a no-op Bump node before doing math.
Cycles specifically recognizes this use case and either bypasses
the node, or converts it into a Geometry Normal node, but Eevee
was still evaluating it as usual. That incurred performance cost,
and also normalized the vector unlike Cycles.
This implements the same bypass logic for Eevee. Since I'm not
sure if it's possible to totally remove the node at this stage,
it emits a no-op function call to copy the input vector.
Differential Revision: https://developer.blender.org/D14045
Viewport cull bones during selection to avoid depth-picking
reading the depth buffer for bones that aren't in the viewport.
Files with thousands of bones could hang blender for seconds while
selecting. The issue could still happen with overlapping bones or when
zoomed out so all bones are under the cursor, however in practice this
rarely happens.
Now files with many bones select quickly.
Related changes include:
- Split `BKE_pchan_minmax` out of `BKE_pose_minmax`.
- Add `mat3_to_size_max_axis` to return the length of the largest
axis (used for scaling the radius).
Reviewed By: sybren
Maniphest Tasks: T91253
Ref D13990
This new info simplifies greatly the handling of resync and deleting
liboverride hierarchies, and makes those operations more robust to
complex dependencies cases between different hierarchies.
Related to T95283.
This change will make handling of liboverrides hierarchies (especially
resyncing) much easier and efficient. It should also make it more
resilient to 'degenerate' cases, and allow proper support of things like
parenting an override to another override of the same linked data (e.g.
a override character parented to another override of the same
character).
NOTE: this commit only implements minimal changes to add that data and
generate it for existing files on load. Actual refactor of resync code
to take advantage of this new info will happen separately.
This change will make handling of liboverrides hierarchies (especially
resyncing) much easier and efficient. It should also make it more
resilient to 'degenerate' cases, and allow proper support of things like
parenting an override to another override of the same linked data (e.g.
a override character parented to another override of the same
character).
NOTE: this commit only implements minimal changes to add that data and
generate it for existing files on load. Actual refactor of resync code
to take advantage of this new info will happen separately.
Previously, node selection made no distinction between a frame node and
other nodes. So a frame node would be selected by their whole rect or
center (depending on box/lasso/circle select). As a consequence of this,
box and lasso could not pratically be started inside a frame node (with
the intention to select a subset of contained child nodes) because the
frame would be selected immediately and tweak-transforming started.
Circle selecting would always contain the frame node as well (making
transforming a subset of nodes without also transforming the whole frame
impossible).
Now change selection behavior so that for all selection modes only the
border [the margin area that is automatically added around all nodes,
see note below] of a frame node is considered in selection. This makes
for a much more intuitive experience when arranging nodes inside frames.
note: to make the area of interest for selection/moving more obvious,
the cursor changes when hovering over (as is done for resizing).
note: this also makes the resize margin consistent with other nodes.
note: this also fixes right resize border (was exclusive instead of
inclusive as every other border)
Also fixes T46540.
This adds an option to the "Select Similar" operator in edit mode to
select vertices based on vertex crease similarity. The implementation
follows that of the edge crease, with a 1-dimensional KD-tree used to
store and retrieve vertex indices base on crease values.
To maintain compatibility with old files (scripts), the `SIMEDGE_CREASE`
enumeration identifier remains `CREASE`, while the one for the new
`SIMVERT_CREASE` is `VCREASE` to follow the naming convention of other
enum values.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D14037
This Diff changes the computation of the input and output socket
position to being always aligned with its corresponding label.
Reviewed By: campbellbarton
Ref D14025
Regression in 51befa4108
caused negative values to overflow into a uint64_t.
Resolve by casting to a signed int from originally signed types.
This caused D14033 not to work properly.
Assign the actual value before casting to large uint64_t/double types.
This improves readability, especially in cases where both pointer
and integer casts were used in one expression, to make matters worse
clang-format treated these casts as a multiplication.
This also made debugging/printing the values more of a hassle.
No functional changes (GCC produced identical output).
Account for `CurveEval`, which stores the proper deformed and
procedurally created data, unlike the `nurb` list, which has always
just meant a copy of the original curve.
Also account for the case when the curve is empty by using a -1, 1,
fallback bounding box in that case, just like mesh objects.
The problem was that nullptr was returned which is a valid value for
Mesh * and hence the returned optional was treated as having some value.
There was no check for point clouds so that was fixed as well.
Differential Revision: https://developer.blender.org/D14026
Based on discussions from T95355 and T94193, the plan is to use
the name "Curves" to describe the data-block container for multiple
curves. Eventually this will replace the existing "Curve" data-block.
However, it will be a while before the curve data-block can be replaced
so in order to distinguish the two curve types in the UI, "Hair Curves"
will be used, but eventually changed back to "Curves".
This patch renames "hair-related" files, functions, types, and variable
names to this convention. A deep rename is preferred to keep code
consistent and to avoid any "hair" terminology from leaking, since the
new data-block is meant for all curve types, not just hair use cases.
The downside of this naming is that the difference between "Curve"
and "Curves" has become important. That was considered during
design discussons and deemed acceptable, especially given the
non-permanent nature of the somewhat common conflict.
Some points of interest:
- All DNA compatibility is lost, just like rBf59767ff9729.
- I renamed `ID_HA` to `ID_CV` so there is no complete mismatch.
- `hair_curves` is used where necessary to distinguish from the
existing "curves" plural.
- I didn't rename any of the cycles/rendering code function names,
since that is also used by the old hair particle system.
Differential Revision: https://developer.blender.org/D14007
This patch makes it possible to set the UI color of a node's
header bar and override the default from the node's typeinfo.
Currently the color is taken from the `.nclass`
member of the node's bNodeType->TypeInfo struct.
This is created once when registering the node.
The TypeInfo is used for both UI and non-UI functionality.
Since the TypeInfo is shared, the header bar for the node
can't be changed without changing all nodes of that type.
The Map Range node is shown as a `Converter` or blue color by default.
This patch allows this to be changed dynamically to `Vector` or purple.
This is done by adding a `ui_class` callback to node typeinfo struct.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D13936
If the console was hidden on windows, it would
be made visible during shutdown in an effort
not hide a potentially active interactive console
session. This however did not take in account
if blender was actually launched from an interactive
console causing the console window to briefly flash
during shutdown even when launched from the new
launcher, the brief flash concerned some users.
This change adjusts the behaviour to restore the
console only when blender was started from the
console.
Reviewed By: LazyDodo
Differential Revision: https://developer.blender.org/D14016
If the "Asset Indexing" option was disabled in Preferences > Experimental
> Debugging, the asset-view template (used by pose libraries for
example) would still use the indexing.
Previously, nearest interpolation filter was used for preview, because
it offered good performance and bilinear was used for rendering. This
is not always desirable behavior, so filter method can now be chosen by
user. Chosen method will be used for preview and for rendering.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D12807
Dashed line display was changed since 2.7x, using white on black
instead of grey on black.
This made selection difficult to see as white is brighter
than the default selected color.
Match the grey used in 2.7x.
This patch from Henrik Dick improves the continuity between the
grid forming corners and the edge polyons on multisegment bevels.
For details, see patch D13867.
Fixes T95384. New exporter was missing a fix for T94516 that recently got applied to the python exporter.
Also changed the obj export tests code so that when save_failing_test_output is requested and MTL result is different from the golden expectation, it is saved as well, similar to how it's done for the OBJ file result.
This change from Aras further parallelizes wihin large meshes (the previous one
just parallelized over objects).
Some stats: on A Windows machine, AMD Ryzen (32 threads):
(one mesh) Monkey subdivided to level 6: 4.9s -> 1.2s (blender 3.1 was 6.3s; 3.0 was 49.4s).
(one mesh) "Rungholt" minecraft level: 8.5s -> 2.9s (3.1 was 10.5s; 3.0 was 73.7s).
(lots of meshes) Blender 3 splash: 6.2s -> 5.2s (3.1 was 48.9s; 3.0 was 392.3s).
On a Linux machine (Threadripper, 48 threads, writing to SSD):
Monkey - 5.08s -> 1.18s (4.2x speedup)
Rungholt - 9.52s -> 3.22s (2.95x speedup)
Blender 3 splash - 5.91s -> 4.61s (1.28x speedup)
For details see patch D14028.
Caused by rBf75449b5f2b04b79, which was missing a null check when
attempting to extract a `CustomData` pointer from an mesh that might
be null if the object isn't a mesh object. The commit added null checks
elsewhere, so simply adding them here is a straightforward fix.
Fixes T95526, T95539
Also fixed conflicts due to the change in file writing in the new obj exporter
in master, and fixed one of the tests that was added in master but not 3.1.
The new wavefront .obj exporter in 3.1 was producing slightly invalid parm line syntax (missing u), and was not setting first/last N params to zeroes and ones for curves with "endpoint" flag properly.
Removes unnecessary calls to blf_glyph_cache_find, simplifies
blf_font_size, and reduces calls to it. blf_glyph_cache_new
and blf_glyph_cache_find made static.
See D13374 for more details.
Differential Revision: https://developer.blender.org/D13374
Reviewed by Campbell Barton
Allowing setting and storing of the default font size as float.
See D13230 for more details.
Differential Revision: https://developer.blender.org/D13230
Reviewed by Campbell Barton
Removal of declaration of unused blf_font_draw_ascii
See D13624 for more details.
Differential Revision: https://developer.blender.org/D13624
Reviewed by Campbell Barton
Cache the font size's ideal fixed width column size in the glyph cache
rather than the font itself to improve performance.
See D13226 for more details.
Differential Revision: https://developer.blender.org/D13226
Reviewed by Campbell Barton
blf_glyph_cache_free does not need to be public.
See D13395 for more details.
Differential Revision: https://developer.blender.org/D13395
Reviewed by Campbell Barton
`viewops_data_alloc` allocates and stores some pointers in
`ViewOpsData` while `viewops_data_create` reuses already stored
pointers and also stores others in `ViewOpsData`.
The similar names and usages can confuse and in this case it also
creates a dependency on the order in which these functions are called.
Merging these functions simplifies usage and deduplicates code.
Since we have a node that sets a mesh's auto smooth angle
(unfortunately, in retrospect), we generally can't assume at all
that value is the same as whatever input mesh. Similar asserts
were removed previously in 8216b759e9. While the attempt
at assertions to clarify assumptions is noble, this one doesn't
make sense anymore.
I found this while investigating T95479.
Differential Revision: https://developer.blender.org/D14009
- Fix image.format conversion to string
- Fix warnings about ARB_conservative_depth not found even if GL > 4.2
- Add `array(type)` define for portable array definition
Thanks to the new `ShaderCreateInfo` we now include source files without
any modification. This let us query which are the source files passed to the
`print_log` function. The log will now include a file with row and column
number which is interpreted as a link in most IDE.
DEBUG_CONTEXT_LINES will add more lines around the error lines for more
context. This is also useful if the error line is imprecise (because of
driver bugs) and the reported line is not sufficient to know the location
of the error.
The DEBUG_DEPENDENCIES option will display the list of included files in
the shader sources. Note that it will not print generated source.
This commit also fixes some issues with unhelpful logs, bogus row & column
numbers, other error format, and bug if row was 0.
Source files are now only referenced and listed for the driver to ingest.
Shader sources now includes generated data if any.
Also cleans up gpu_shader_dependency_get_builtins casts.
This includes multiple commits:
- Fix crash when using std::cerr for error output
- Add auto_resource_location which overrides all resources location (not vert input)
- Improve codestyle of error reporting.
- Add type conversion to string and to `eGPUType`
- Add comparison operator (will be used for hash collision resolution).
- Add members related to generated code (codegen)
Detected on `amdgpu-pro` libGL implementation. The workaround is to not
use explicit location for vertex attributes. This is not a real problem
as we don't rely on them for now.
This was an oversight in the patch that added this node,
the default merge distance is meant to be the same as the weld
modifier, 0.001m, meaning by in most situations it removes
vertices generally at the same location.
- Compute ref let the size of dispatch be modified just before drawing.
- Barrier call makes it possible to chain multiple compute passes in one pass.
- DRW_shgroup_vertex_buffer_ref is the analog of DRW_shgroup_uniform_block_ref.
Since we have a node that sets a mesh's auto smooth angle
(unfortunately, in retrospect), we generally can't assume at all
that value is the same as whatever input mesh. Similar asserts
were removed previously in 8216b759e9. While the attempt
at assertions to clarify assumptions is noble, this one doesn't
make sense anymore.
I found this while investigating T95479.
Differential Revision: https://developer.blender.org/D14009
This commit adds infrastructure for 8 bit signed integer attributes.
This can be useful given the discussion in T94193, where we want to
store spline type, Bezier handle type, and other small enums as
attributes.
This is only exposed in the interface in the attribute lists, so it
shouldn't be an option in geometry nodes, at least for now.
I expect that this type won't be used directly very often, it
should mostly be cast to an enum type. However, with support
for 8 bit integers, it also makes sense to add things like mixing
implementations for consistency.
Differential Revision: https://developer.blender.org/D13721
Required to solve a crash on windows (T95367)
Mostly an uneventful update, except for FreeType
giving its cmake options a rename.
Reviewed By: brecht, sybren
Differential Revision: https://developer.blender.org/D13968
Every translation unit that included the modified headers generated
some extra code, even though it was not used. This adds unnecessary
compile time overhead and is annoying when investigating the
generated assembly.
Initialization with `MEM_new()` depends a lot on the initialization rules
of C++, which are not obvious. Calling it with no arguments to be passed
to the constructor may cause the resulting object to be implicitly 0
initialized (or parts of it). This can have an impact on performance
sensitive code, so it's something to document.
Alternatively we could enforce default initialization (as opposed to the
value initalization that happens now), but this could cause
uninitialized memory in a way that isn't obvious either. This is a
possible source of bugs, so Jacques and I decided against it.
Use the global F2 rename panel for the NLA editor to rename NLA strips.
Reviewed By: sybren, RiggingDojo
Differential Revision: https://developer.blender.org/D12300
It was missing framework flags added in `setup_platform_linker_flags`.
Keep it off until QuickLook Thumbnailing is implemented.
Differential Revision: https://developer.blender.org/D13997
The check for existence of custom data layers did not take wrapper nature of
mesh into account.
Quickest and safest for 3.1 solution is to take care of branching of checks
in the draw manager.
Ideally both wrapper and mesh access will happen via the same public API
without branching in the "user" code. That is something outside of the fix
for the coming release though.
Differential Revision: https://developer.blender.org/D14013
This callback was only needed to allow specific handling of proxies, now
that theses have been removed the generic
`BKE_lib_id_make_local_generic` code works for objects as well.
Byte images are converted to float. Due to an issue how VSE cache is
freeing its images we cannot store these float buffers what leads
to recalculating it for each change in the image editor.
This fix will reduce the slowdown to areas that have the root cause of
the memory leak, so the buffers can be reused between refreshes.
NOTE: The root cause should still be fixed.
Thanks for reporting Sybren!
Didn't cause visible issues, because the layout uses spacers to
right-align text, which happens to use the region size with pixel-size
applied for calculations.
Some navigation operators check flags like `RV3D_LOCK_ROTATION` in the
invoke function to see if the operation can be performed.
As the comment indicates, these checks should be in the poll function.
This avoids redundant initialization.
Note that this brings functional changes as now operators with context
`EXEC_DEFAULT` will also be affected by the flag.
(There doesn't seem to be a problem with the current code).
Differential Revision: https://developer.blender.org/D14005
The strings in the `get_description` functions for operators need
translation, they are not found by the translation system automatically,
and there is no translation applied afterwards either (as far as I could
tell). Some used `N_` before, but most did nothing.
Differential Revision: https://developer.blender.org/D14011
The case where Y rotation is mapped to Y rotation was not handled.
This is now fixed.
Also added an automated test to make sure that the symmetrize operator
functions as intended.
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D9214
This was caused by macros interpreted as recursive. Workaround by
not using macros at all and just define local variables which
hopefully will be optimized.
This was caused by macros interpreted as recursive. Workaround by
not using macros at all and just define local variables which
hopefully will be optimized.
Crash introduced by {rB0cb5eae}.
When switching to between drawing modes the region.draw_buffer could be
uninitialized when the gizmo depth test is performed. When the mouse is
placed on top of a gizmo part that could be highlighted would crash.
This fix adds a early exit when depth testing is requested, but there
isn't a draw_buffer. Not sure this is an root cause fix.
Reported by multiple animators in Blender Studio.
Technically, this can't be relied upon in the long term. It worked more or
less accidentally before. It was broken by a previous fix accidentally. I mainly
bring it back because rBa985f558a6eb16cd6f0 was not expected to have
this side effect.
Note, this change can result in slower performance. Writing to a vertex
groups is less efficient than using a generic attribute.
Previously, these methods used the more generic substring-finding
algorithm, which is more complex and slower.
Using the more specialized methods results in a noticable speedup
in the obj importer (D13958).
Differential Revision: https://developer.blender.org/D14012
When viewing backdrop on top of the node grid, the grid would be
rendered black when the mode wasn't set to RGBA. This fix fixes this by
reverting the previous fix of drawing the backdrop and implement a
different one that recomputes the UV coordinates on the screen edges.
DNAstr was assumed to be 4-byte aligned which is not necessarily
the case for byte-arrays.
Use a compiler attribute to ensure this is the case.
Thanks to @mtasaka for investigating and providing a patch.
Part of T91671.
Not much else to say, this is mainly a massive deletion of code.
Note that a few cleanups possible after this proxy removal were kept out
of this commit to try to reduce a bit its size.
Reviewed By: sergey, brecht
Maniphest Tasks: T91671
Differential Revision: https://developer.blender.org/D13995
This doesn't make a user visible difference since it's only used for
brackets at the moment, this is more for general correctness as the
width calculation for mono-spaced text drawing is different
(as it uses BLI_wcwidth).
ED_transverts_create_from_obedit expected an evaluated object.
Add flag to request TX_VERT_USE_MAPLOC to be set, which avoids having to
calculate this data when it's not used as well as the requirement
that the input object be evaluated from the depsgraph.
This fixes the crash by removing the `do_view3d_header_buttons` handler.
The code can work at a higher level here, using the operator for setting
the select mode, which makes this patch a cleanup as well.
The operator now has a description callback to add the custom
description used for the behavior in its invoke method.
Differential Revision: https://developer.blender.org/D13660
Since f59767ff97, these hair layer types are unused. Since DNA
compatibility was broken with any files that would contain them, the
indices can be reused to avoid growing custom data's typemap.
In the future when we have a docs staging area it will be
important to change where this JSON is pulled from.
For now, always pull from the "Production" versions
This commit adds a version switch similar to the one on the user manual,
in the future it would be nice to refactor both of these into a more generic
code that works for both. Maybe develop this into a sphinx extension.
As part of this change I had to change how the blender hash is displayed.
Instead of the version hash in the top left it has been moved to the page footer.
This change will also be backported to 2.93 LTS, 2.93 LTS, and 3.0.
This patch refactors the "Hair" data-block, which will soon be renamed
to "Curves". The larger change is switching from an array of `HairCurve`
to find indices in the points array to simply storing an array of offsets.
Using a single integer instead of two halves the amount of memory for that
particular array.
Besides that, there are some other changes in this patch:
- Split the data-structure to a separate `CurveGeometry`
DNA struct so it is usable for grease pencil too.
- Update naming to be more aligned with newer code and the style guide.
- Add direct access to some arrays in RNA
-- Radius is now retrieved as a regular attribute in Cycles.
-- `HairPoint` has been renamed to `CurvePoint`
-- `HairCurve` has been renamed to `CurveSlice`
- Add comments to the struct in DNA.
The next steps are renaming `Hair` -> `Curves`, and adding support
for other curve types: Bezier, Poly, and NURBS.
Ref T95355
Differential Revision: https://developer.blender.org/D13987
This is partially caused by a stupid mistake in cfa53e0fbe
where I missed initializing the `vert_normals` pointer in
`MResolvePixelData`. It's also caused by questionable assumptions
from DerivedMesh code that vertex normals would be valid.
The fix used here is to create a temporary mesh with the data necessary
to compute vertex normals, and ensure them here. This is used because
normal calculation is only implemented for `Mesh` and edit mesh, not
`DerivedMesh`. While this might not be great for performance, it's
potentially aligned with future refactoring of this code to remove
`DerivedMesh` completely. Since this is one of the last places the data
structure is used, that would be a great improvement.
Differential Revision: https://developer.blender.org/D13960
Iterating over scene's objects while we modify those (through proxy to
override conversion code) is call for problems (use after free etc.).
Instead, all proxy objects need to be gathered first in a temporary
list, and processed all at once in a second loop.
`BKE_collection_object_add` ensures given object is added to an editable
collection, and not e.g. a linked or override one.
However, some processes like do_version manipulate collections also from
libraries, i.e. linked collections, in those cases we need a version of
the code that unconditionnally adds the given object to the given
colleciton.
This is from patch D13988. It removes the "- New" from the menu of the
new obj exporter, changes the default addon to just io_import_obj,
and does the right versioning thing.
Also disables the python tests for the old python exporter.
This patch reverts the normal behavior of the spotlights. In the last fix,
the returned normal of a spot light was equal to its direction. This broke
some texturing methods used by artists.
Differential Revision: https://developer.blender.org/D13991
The view3d_edit.c file is already getting big (5436 lines) and mixes
operators of different uses.
Splitting the code makes it easier to read and simplifies the
implementation of new features.
Differential Revision: https://developer.blender.org/D13976
Those cases are fairly hard to track down... Added some more checks,
also at lower levels, more generic levels of object editing, and fixed
core check in liboverride (previously code was assuming that an override
of a collection only could have overrides of objects or linked objects,
but this is not necessarily true).
This is from patch D13988. It removes the "- New" from the menu of the
new obj exporter, changes the default addon to just io_import_obj,
and does the right versioning thing.
Also disables the python tests for the old python exporter.
Use the ID.recalc flag to detect when updates after frame-change is
needed. Since comparing the last calculated frame doesn't take undo into
account (see code-comment for details).
`ID_RECALC_AUDIO_SEEK` has been renamed to `ID_RECALC_FRAME_CHANGE`
since this is not only related to audio however internally this flag is
still categorized in `NodeType::AUDIO`.
Reviewed By: sergey
Ref D13942
The issue was happening with a specific file where the ID management
code was not fully copying all modifiers because of the extra check
in the `BKE_object_support_modifier_type_check()`.
While it is arguable that copy-on-write should be a 1:1 copy there is
no real need to maintain the per-modifier pointer to its original.
Use its SessionUUID to perform lookup in the original datablock.
Downside of this approach is that it is a linear lookup instead of
direct pointer access, but the upside is that there is less pointers
to manage and that the file with unsupported modifiers does behave
correct without any asserts.
Differential Revision: https://developer.blender.org/D13993
The modifiers are mapped between original and evaluated objects based on
their session IDs. The pointer to original modifier is no longer needed
for the backup: it remained from the initial implementation which was
rewritten at some point.
This is a preparation for removal of the pointer to original modifier.
c9d9bfa84a caused a regression in when
the right-mouse select action was set to "Select & Tweak" (default).
Now the fallback tool works with RMB select as it did before.
This will allow to keep the access to deprecated DNA proxy data in that
specific file, instead of allowing deprecated accesses in the whole
override kernel code.
Part of T91671.
Part of the resynching code would access collections' objects base
cache, which can be invalid at that point (due to previous ID remapping
and/or deletion). Use a custom recursive iterator over collections'
objects instead, since those 'raw' data like collection's objects list,
and collection's children lists, should always be valid.
Found while investigating a studio production file.
This is a temp fix for a memory leak where the VSE isn't aware that a
float representation of the image could exist. The VSE somehow doens't
clears it (refcounter is still 1).
The work around is just to let the image engine clean up all the data it
created. Potential this would add more overhead when buffers are needed
more than once.
This refactors how output attributes are computed in the geometry
nodes modifier. Previously, all output attributes were computed one
after the other. Every attribute was stored on the geometry directly
after computing it. The issue was that other output attributes might
depend on the already overwritten attributes, leading to unexpected
behavior.
The solution is to compute all output attributes first before changing the
geometry. Under specific circumstances, this refactor can result in a speedup,
because output attributes on the same domain are evaluated together now.
Overwriting existing might have become a bit slower, because we write the
attribute into new buffer instead of using the existing one.
Differential Revision: https://developer.blender.org/D13983
Mistake in the 974981a637: f the edit data is not present then the
origindex codepath is to be used. Added a brief note about it on the
top of the file.
More ideally would be to remove edit mesh from non-bmesh-wrappers
but this would require changes in the draw manager to make a proper
decision about drawing edit mode overlays.
Now all proxies will always be converted to library overrides. If
conversion fails, they are simply 'disabled'.
This should be the last 'user-visible' step of proxies removal.
Remaining upcoming commits will remove internal ID management, depsgraph
and evaluation code related to proxies.
Also bump the blendfile subversion.
Part of T91671.
So far linked proxies were just kept as-is, this is no longer an option.
Attempt to convert them into liboverrides as much as possible, though
some cases won't be supported:
- Appending proxies is broken since a long time, so conversion will fail
here as well.
- When linking data, some cases will fail to convert properly. in
particular, if the linked proxy object is not instanced in a scene
(e.g. when linking a collection containing a proxy as an
epty-instanced collection instead of a view-layer-instanced collection).
NOTE: converion when linking/appending is done unconditionnaly, option
to not convert on file load will be removed in next commit anyway.
Part of T91671.
This will help when dealing with liboverrides from other library files,
e.g for resync or proxies conversion.
This commit only affects proxy conversion.
Part of T91671.
We have this node for shader and geometry nodes. Compositor can also
work with vectors, and this can help with that.
Reviewed By: manzanilla
Maniphest Tasks: T95385
Differential Revision: https://developer.blender.org/D12919
The geometry nodes modifier currently always adds a dependency
relation from the evaluated geometry to the object transform. However,
that can be avoided unless there is a collection or object info node in
"Relative" mode.
In order to avoid requiring dependency graph relations updates often
when editing a node tree, this patch doesn't check if the node is muted
or if the data-block sockets are empty before adding the dependency.
Fixes T95265
Differential Revision: https://developer.blender.org/D13973
Function `IMB_indexer_get_seek_pos()` can return non 0 seek position for
frame index 0. This causes seeking to incorrect GOP and scanning ends
with failiure.
Hard-code first frame index seek position to 0.
Differential Revision: https://developer.blender.org/D13974
Some items on the Quick Setup screen can be truncated with some
languages and/or with High DPI monitors. This patch adjusts column
sizes and turns off the expand on Spacebar options, making everything
fit a bit better.
See D9853 for more details.
Differential Revision: https://developer.blender.org/D9853
Reviewed by Julian Eisel
Using opt-in instead of opt-out to make code easier to read.
Add combined flag enum.
Making restrict an inverse flag option because it is so rare to
use it.
This adds the possibility to use the `gpu_BaryCoord[NoPersp]`
builtin to support barycentric coordinates without geometry shader.
The `BuiltinBits::LAYER` builtin needs to be manually added
to the `GPUShaderCreateInfo` in order to use this feature.
Note: This is only available for shaders using `GPUShaderCreateInfo`.
A geometry shader fallback is generated if the extension
`AMD_shader_explicit_vertex_parameter` is not available.
`NV_fragment_shader_barycentric` was not considered because it is not
present inside the `glew.h` with use and seems to only be available
with vulkan.
This adds the possibility to use the `gpu_Layer` builtin to
support layered rendering without geometry shader.
The `BuiltinBits::LAYER` builtin needs to be manually added
to the `GPUShaderCreateInfo` in order to use this feature.
Note: This is only available for shaders using `GPUShaderCreateInfo`.
A geometry shader fallback is generated if the extension
`AMD_shader_explicit_vertex_parameter` is not available.
- Scan all static shaders for builtins on startup.
- Add possibility to manually add builtins.
- `ShaderCreateInfo.builtins_` contain builtins from all stages.
If an entire cyclic stroke was selected, calling "Separate by Points"
would leave a gap in the new object (making the new stroke non-cyclic).
The patch makes sure that if we separate by points and all points are
selected, we fall back to separate by stroke.
Reviewed By: antoniov
Maniphest Tasks: T91463
Differential Revision: https://developer.blender.org/D12527
This patch fixes the error that pops up
(`Error: Unable to execute '... Mode Toggle', error changing modes`)
when trying to switch to e.g. draw mode from a grease pencil object
that was saved in draw mode in an inactive scene when the file was loaded.
Note that this does not fix the bigger issue described in T91243.
The fix makes sure that we reset all the mode flags on the grease pencil
data when we set the mode to object mode.
Reviewed By: antoniov
Maniphest Tasks: T89514
Differential Revision: https://developer.blender.org/D12419
When adding an asset library in the Preferences, set the name of the new
library to the chosen directory's name by default. That avoids having to
set it manually which can be annoying. Previously I thought it would be
nice to show the name button in red then, making the user aware that
they have to give it a name, but that appears to be more annoying than
useful/practical after all.
The issue was that the code only looked at `dob->ob`
instead of `dob->ob_data` which is necessary since
rB5a9a16334c573c4566dc9b2a314cf0d0ccdcb54f.
This now uses the same pattern that is used in other places
where `BKE_object_replace_data_on_shallow_copy` is used.
Blender would have crashed when renaming bone in Edit Mode, Saving, and
than selecting/deselecting.
Caused by a mistake in the 0f89bcdbeb: can not "short-circuit" the
CoW update if it was explicitly requested.
Safest for now solution seems to be to store whether the CoW component
has been explicitly tagged, so that the following configuration can be
supported:
DEG_id_tag_update(id, ID_RECALC_GEOMETRY);
DEG_id_tag_update(id, ID_RECALC_COPY_ON_WRITE);
Differential Revision: https://developer.blender.org/D13966
Since splitting the depth and the color shader in the image engine the
backdrop wasn't visible anymore. The reson is that the min max uv
coordinates were never working for the node editor backdrop that uses
its own coordinate space.
This partial fix will ignore the depth test when drawing the color part
of the backdrop. This will still have artifacts that are visible when
showing other options as RGBA.
Proper fix would be to calculate the the uv vbo in uv space and not in
image space.
Can also happen in other places when the overlay engine is active. Some
parts of the overlay engine uses builtin shaders, but disable the color
space conversion to the target texture.
Currently there the overlay engine has its own set of libraries it could
include and defined a macro to pass-throught the color space conversion.
The library include mechanism currently fails when it couldn't find the
builtin library in the libraries of the overlay engine. This only
happened in debug mode.
This change will not fail, but warns the developer if a library could
not be included. In the future this should be replaced by a different
mechanism that can disable the builtin library. See {T95382}.
Since d9c6ceb3b8 partial updates to
normals in sculpt-mode were accumulating into the current normal
instead of a zeroed value.
Zero vertex normal values tagged for calculation before accumulation.
Reviewed By: HooglyBoogly
Ref D13975
From investigating T95185, it's important the normal returned by
SCULPT_vertex_normal_get always match the PBVH normal array.
Since this is always initialized in the PBVH, there is no advantage
in storing the normal array in two places, it only adds the possibility
that changes in the future causing different meshes normals to be used.
Split out from D13975.
Since 0ea0ccc4ff, `AV_PIX_FMT_YUV444P` pixel format was used for
lossless renders, which did override `AV_PIX_FMT_YUVA420P` format when
"RGBA" output is chosen. VP9 encoder doesn't seem to support
`AV_PIX_FMT_YUVA444P` pixel format, so use `AV_PIX_FMT_YUVA420P` for
lossless RGBA ouput instead.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D13947
Currently, audio and video strips are synchronized based on data from
media stream, which is nice, but this causes gaps between strips.
This synchronization was implemented by moving movie strip position
relative to sound, which doesn't make much sense for user which is
mostly interested in editing video.
Code was bit hard to read, so it has been simplified. Ideally video
stream time would be easily accessible so synchronization could be done
at any time, but this is not necessary at this point.
Reviewed By: zeddb
Differential Revision: https://developer.blender.org/D13948
Correct corner radius of the node outline to prevent a noticeable gap in
some cases.
---
Currently we make a small mistake in the creation of the node outline:
We offset the rectangle describing the outline by the outline thickness,
but we don't adjust the corner radius accordingly.
Therefore the rounded corner of the outline and the node body are not
concentric which can sometimes lead to a visible gap at the corner.
How noticeable it is depends on the theme, the screen's dpi and the
line thickness set in the preferences.
Simply adjusting the corner radius for the outline to also be increased
by the outline thickness fixes this small issue.
| display, line thickness | **patch** | **master** |
| --- | --- | --- |
| 1080p, default/thin | {F12835304} | {F12835305} |
| retina, thin | {F12835306} | {F12835307} |
The issue was mentioned by @hitrpr
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D13955
Use the evaluated mesh to generate the Adjacent Faces margin.
Baking used the evaluated mesh, but generating the margin used the base
mesh. This would lead to generating the margin from a stale UV map when the
UV editor was open and the UV map was changed. Fix it by passing the same
mesh as used for baking through to the margin generation.
Differential Revision: https://developer.blender.org/D13938
The new adjacent faces method border lookup fails in some directions around
45 degrees
* Use 8 Dijkstra directions (also diagonally) to determine which polygon is the
closest to each pixel. Using only Manhattan distance lead to large parts of
the texture which were matched with the wrong polygon.
* Use neighbroing polygons for edge search. The Adjacent Faces algorithm needs
to determine the closest edge, in UV space, each pixel. To speed this up
first as map is built which finds the closest polygon for each pixel along
horizontal, vertical and diagonal steps. Because this can sometimes be one
edge off we first look in the polygon from the map, if that fails also
check the edges of its neighbouring UV polygons.
Differential Revision: https://developer.blender.org/D13935
For those EEVEE passes a bit of trickery with pointer offsets allows to
get the owning viewlayer, so path generation is not too bad.
Also moved ViewLayer path generation itself into a public utils, to
avoid duplicating code.
NOTE: Doing the same for AOV would be needed, but since pointer offsets
won't help us here to find the owning viewlayer, not sure how to do it
nicely yet (only solution I think is to loop over all AOVs of all
ViewLayer of the scene to find it :( ).
Reported by Beau Gerbrands (@Beaug), thanks.
Image buffer was visible but buffer wasn't available. In the case
the color only overlay of the render result was displayed the image
buffer was not check to be valid.
This patch adds a null pointer check to check in `IMB_alpha_affects_rgb`
to solve this crash.
This commit specifies the exact Python version which is included in the
package name, thereby allowing `install_deps.sh` to suggest
"`-D PYTHON_VERSION=3.10`" correctly.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D13925
Empty (UDIM) tiles where drawn with a transparency checkerboard. They
should be rendered with a border background. The cause is that the image
engine would select a single area that contained all tiles and draw them
as being part of an image.
The fix is to separate the color and depth part of the image engine
shader and only draw the depths of tiles that are enabled.
While this didn't cause any user visible bugs, this wouldn't
have behaved as intended since the timer would never run again once
wmTimer.ntime was set to NAN.
GPU_select originally used GL_SELECT which defined the format for
storing the selection result.
Now this is no longer the case, define our own struct - making the code
easier to follow:
- Avoid having to deal with arrays in both `uint*` and `uint(*)[4]`
multiplying offsets by 4 in some cases & not others.
- No magic numbers for the offsets of depth & selection-ID.
- No need to allocate unused members to match GL_SELECT
(halving the buffer size).
Remove functions and function pointers that were never set or never
used at all. The "tessface" original index handling in `subsurf_ccg.c`
can be removed because the data was never used.
This function and flags weren't used outside of DerivedMesh
code, and since the plan is to remove the data structure, it makes
sense to remove complexity where possible.
This is a patch from Aras Pranckevicius, D13927. See that patch for full
details. On Windows, the many small fprintfs were taking up a large amount
of time and significant speedup comes from using snprintf into chained buffers,
and writing them all out later.
On both Windows and Linux, parallelizing the processing by Object can also lead
to a significant increase in speed.
The 3.0 splash screen scene exports 8 times faster than the current C++ exporter
on a Windows machine with 32 threads, and 5.8 times faster on a Linux machine
with 48 threads.
There is admittedly more memory usage for this, but it is still using 25 times
less memory than the old python exporter on the 3.0 splash screen scene, so
this seems an acceptable tradeoff. If use cases come up for exporting obj files
that exceed the memory size of users, a flag could be added to not parallelize
and write the buffers out every so often.
Previously, the new obj exporter was only exporting per-vertex normals for faces
marked as "smooth". But a face can have custom normals, as soon as the normals
data layer exists. This change makes it follow the behavior of USD & Collada
exporters and the old Python one, which also export per-vertex normals as soon
as the layer is there. (From Patch D13957.)
This is similar to e032ca2e25 which removed the
callback for volumes. Now that we have geometry sets, there is
no need to define a callback for every data type, and this wasn't
used. Procedural curves/hair editing will use nodes rather than new
modifier types anyway.
Since `event->xy` is now an array these functions can be
simplified to accept the sample point as an array.
Clarifications were also made to variable names:
- `eye->last_x/y` --> `eye->cursor_last`
- `mx/my` --> `cursor`
Differential Revision: https://developer.blender.org/D13671
Previously, macros were ifdefed using the cmake option `WITH_INTERNATIONAL`
However, the is unnecessary as withen the functions themselves have checks for building without internationalization.
This also means that many `add_definitions(-DWITH_INTERNATIONAL)` are also unnecessary.
Reviewed By: mont29, LazyDodo
Differential Revision: https://developer.blender.org/D13929
This fixes a regression from rBa0edee712a79239133ff840f911f6416d4c41855.
Issue being the curve map not being initialized in the GPU shader function.
Fixes T95221
This fixes a regression from rBa0edee712a79239133ff840f911f6416d4c41855.
Issue being the curve map not being initialized in the GPU shader function.
Fixes T95221
As part of the project of converting `MVert` into `float3`
(more details in T93602), this is an easy step, since it
is only locally used runtime data. In the six places it was
used, the flag was replaced by a local bitmap.
By itself this change has no benefits other than making some
code slightly simpler. It only really matters when the other
flags are removed and it can be removed from `MVert`
along with the bevel weight.
Differential Revision: https://developer.blender.org/D13878
For every spline, *all* of the normals and tangents in the output
were normalized. The node is multithreaded, so sometimes a thread
overwrote the normalized result from another thread.
Fixing this problem also made the node orders of magnitude
faster when there are many splines.
Show a more instructive error message for users who have plugged
multiple monitors into multiple display adapters. And do not exit
if unable to open a child window when in this state.
See D13885 for more details
Differential Revision: https://developer.blender.org/D13885
Reviewed by Ray Molenkamp
The GLSL defines used to make the uniform names unusable for local variable
is being interpreted as recursive on some implementation.
This avoids it by create a second macro avoiding the recursion.
Allow Windows IME Pinyin, when in Chinese mode, to use numpad decimal
key to enter decimal point.
See D13902 for more details.
Differential Revision: https://developer.blender.org/D13902
Reviewed by Brecht Van Lommel
Convert Ideographic Full Stop, used in Simplified Chinese and Japanese,
to Decimal Point when entering numbers into numerical inputs.
See D13903 for more details
Differential Revision: https://developer.blender.org/D13903
Reviewed by Brecht Van Lommel
This patch adds a "OneDrive" icon to the File Manager System list for
Windows (only!).
See D11133 for more details.
Differential Revision: https://developer.blender.org/D11133
Reviewed by Julian Eisel
Initialize m_Bar, m_dropTarget, & m_hWnd members of GHOST_WindowWin32
in constructor's member initializer list. This ensures they are are
set or NULL in destructor if constructor does not complete.
See D13886 for more details.
Differential Revision: https://developer.blender.org/D13886
Reviewed by Jesse Yurkovich
Buttons can hold context and it's very useful to use this as a way to
let buttons provide context for drop operators.
For example, with this D13549 can make the material slot list set the
material-slot pointer for each row, and the drop operator can just query
that.
Sometime throughout development some checks got lost during refactor.
This change makes it so that if OIDN is not supported on the current
CPU Cycles will report an error and stop rendering. This behavior is
similar to when an OptiX denoiser is requested and there is no OptiX
compatible device available.
The easiest way to verify this change is to force return false from
the `openimagedenoise_supported()`.
Fixes Cycles part of the T94127.
Differential Revision: https://developer.blender.org/D13944
Parameter was used to still be compatible with the previous drawing mode.
The previous mode isn't available anymore so the parameter can should be
removed.
After showing the alpha in the image editor the setting was not reset
so all images in the editor showed as being transparent.
This commit fixes this by resetting the flag before updating.
In Outliner, 'Make Override Hierarchy' on an indirectly linked data would
fail in case some items higher up in the hierarchy also needed to be
overridden was also indirectly linked.
In Outliner, 'Make Override Hierarchy' on an indirectly linked data would
fail in case some items higher up in the hierarchy also needed to be
overridden was also indirectly linked.
Adding better support for drawing huge images in the image/uv editor. Also solved tearing artifacts.
The approach is that for each image/uv editor a screen space gpu texture is created that only contains
the visible pixels. When zooming or panning the gpu texture is rebuild.
Although the solution isn't memory intensive other parts of blender memory usage scales together with
the image size.
* Due to complexity we didn't implement partial updates when drawing images tiled (wrap repeat).
This could be added, but is complicated as a change in the source could mean many different
changes on the GPU texture. The work around for now is to tag all gpu textures to be dirty when
changes are detected.
Original plan was to have 4 screen space images to support panning without gpu texture creation.
For now we don't see the need to implement it as the solution is already fast. Especially when
GPU memory is shared with CPU ram.
Reviewed By: fclem
Maniphest Tasks: T92525, T92903
Differential Revision: https://developer.blender.org/D13424
This patch reimplements the image partial updates. Biggest design motivation for the redesign
is that currently GPUTextures must be owned by the image. This reduces flexibility and adds
complexity to a single component especially when we want to have different structures.
The new design is not limited to GPUTextures and can also be used by reducing overhead in image
operations like scaling. Or partial image updating in Cycles.
The usecase in hand is that we want to support virtual images in the image editor so we can
work with images that don't fit in a single GPUTexture.
Using `BKE_image_partial_update_mark_region` or `BKE_image_partial_update_mark_full_update`
a part of an image can be marked as dirty. These regions are stored per ImageTile (UDIM).
When a part of the code wants to receive partial changes it needs to construct a `PartialUpdateUser`
by calling `BKE_image_partial_update_create`. As long as this instance is kept alive the changes can
be received.
When a user wants to update its own data it will call `BKE_image_partial_update_collect_changes`
This will collect the changes since the last time the user called this function. When the partial changes
are available the partial change can be read by calling `BKE_image_partial_update_get_next_change`
It can happen that the introduced mechanism doesn't have the data anymore to construct the
changes since the last time a PartialUpdateUser requested it. In this case it will get a request
to perform a full update.
Maniphest Tasks: T92613
Differential Revision: https://developer.blender.org/D13238
Assert when "//" prefixed relative paths are passed to
BLI_path_cmp_normalized as this can't be expanded
and it's possible the paths come from different blend files.
Changes to recent addition: c85c52f2ce.
Having both BLI_paths_equal and BLI_path_cmp made it ambiguous
which should be used, as `BLI_paths_equal` wasn't the equivalent to
`BLI_path_cmp(..) == 0` as it is for string equals macro `STREQ(..)`.
It's also a more specialized function which is not used for path
comparison throughout Blender's internal path handling logic.
Instead rename this `BLI_path_cmp_normalized` and return the result of
`BLI_path_cmp` to make it clear paths are modified before comparison.
Also add comments about the conventions for Blender's path comparison
as well as a possible equivalent to Python's `os.path.samefile`
for checking if two paths point to the same location on the file-system.
The `OUTLINER_OT_item_activate` operator, although it detects when
something changes, always returns `OPERATOR_FINISHED` and thus induces
the creation of undo steps.
So return `OPERATOR_CANCELLED` when nothing changes.
Ref T94080
Reviewed By: Severin
Maniphest Tasks: T94080
Differential Revision: https://developer.blender.org/D13638
- Fix assert on size.
- Fix void * casting.
- Pass extent by values.
- Add swap function to avoid letting the types copyable.
- Add back the GPUTexture * operator on TextureFromPool.
Does two main changes:
* Handle regions in the order as visible on screen. Practically this
just means handling overlapping regions before non-overlapping ones.
* Don't handle any other regions after having found one containing the
mouse pointer.
Fixes: T94016, T91538, T91579, T71899 (and a whole bunch of duplicates)
Addresses: T92364
Differential Revision: https://developer.blender.org/D13539
Reviewed by: Campbell Barton
Asserts that such events actually always lead to a handler return value
that actually keeps the event passing.
Reviewed by Campbell Barton as part of
https://developer.blender.org/D13539.
Though the edge vertices aren't really meant to have an order,
it can make a difference in operations when there isn't any other
information to make decisions from, like etruding a circle of
loose edges (the situation in the report). This commit changes
the order of the vertices in the final cyclic edge to go in the
same direction as all of the other edges.
The vertex and face normals from the input mesh
were used to calculate the normals on the result,
which could cause a crash because the result should
be about twice as large.
Also remove an unnecessary dirty tag, since it is handled
automatically when creating a new mesh or in the case
of the mirror modifier, when calculating the new custom
face corner normals.
Swap "active" and "selected" in the tooltip if the `use_reverse_transfer`
option is activated.
Reviewed By: mont29
Maniphest Tasks: T85233
Differential Revision: https://developer.blender.org/D13499
Also fixes similar issues regarding some liboverride menu entries.
Reviewed By: mont29
Maniphest Tasks: T93766
Differential Revision: https://developer.blender.org/D13513
Add `USD Preview Surface From Nodes` export option, to convert a
Principled BSDF material node network to an approximate USD Preview
Surface shader representation. If this option is disabled, the original
material export behavior is maintained, where viewport setting are saved
to the Preview Surface shader.
Also added the following options for texture export.
- `Export Textures`: If converting Preview Surface, export textures
referenced by shader nodes to a 'textures' directory which is a
sibling of the USD file.
- `Overwrite Textures`: Allow overwriting existing texture files when
exporting textures (this option is off by default).
- `Relative Texture Paths`: Make texture asset paths relative to the
USD.
The entry point for the new functionality is
`create_usd_preview_surface_material()`, called from
`USDAbstractWriter::ensure_usd_material()`. The material conversion
currently handles a small subset of Blender shading nodes,
`BSDF_DIFFUSE`, `BSDF_PRINCIPLED`, `TEX_IMAGE` and `UVMAP`.
Texture export is handled by copying texture files from their original
location to a `textures` folder in the same directory as the USD.
In-memory and packed textures are saved directly to the textures folder.
This patch is based, in part, on code in Tangent Animation's USD
exporter branch.
Reviewed By: sybren, HooglyBoogly
Differential Revision: https://developer.blender.org/D13647
Downgrade the Python zstandard from 0.17.0 to 0.16.0. The Python package
should be linked against the exact same version of libzstd as Blender is,
otherwise it will refuse to load from within the Blender executable.
Python zstandard 0.17.0 links to 1.5.1, whereas we need 1.5.0.
`chardet` was replaced by `charset_normalizer` for modern `requests`.
With this change, `{make,ninja} install` will also copy the latter into
Blender's install directory.
This opt-in functionnality enabled developper keep track of unused
resources present in the `GPUShaderCreateInfo` descriptors of their
shaders.
The output is pretty noisy at the moment so we do not enforce its usage.
While install_deps tries to stay as close as possible from official
Blender versions of the libraries, it also strives to use as many distro
packages as possible.
OSL 1.11.16.0 is the minimal version that builds with llvm13, which is
the default llvm/clang version in e.g. Debian testing.
Adds two new attribute outputs:
"Line" outputs the line number of the character.
"Pivot Point" outputs the selected pivot point position per char.
Some refactoring of the text layout code.
Differential Revision: https://developer.blender.org/D13694
`node_exec` had some code that was specific to texture/shader nodes.
These functions arent used outside there module so limit there declarations.
Also make a function static that is only used in `node_exec.c`
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D13899
The `TreeElement.rnaptr` was only needed for RNA tree-elements. Now it
can be gotten through the new type specific classes, e.g.
`TreeElementRNAProperty.getPointerRNA()`.
Plan is to remove things like `TreeElement.directdata` and to instead
expose specific queries in the new type specific tree-element classes.
e.g. like here: `TreeElementSequence.getSequence()`
For now uses `tree_element_cast<>()` to get the new type specific
tree-element, later these should replace `TreeElement` all together.
Add function to safely request the type-specific C++ element from a
C-style `TreeElement`. Looks like this:
```
TreeElementFoo *te_foo = tree_element_cast<TreeElementFoo>(te);
```
The "cast" will return null if the tree-element doesn't match the
requested type.
This is useful for the transition from the C-style type to the new ones.
This uses a light parser / string modification pass to convert
C++ enum declaration syntax to GLSL compatible one.
GLSL having no support for enums, we are forced to convert the
enum values to a series of constant uints.
The parser (not really one by the way), being stupidly simple,
will not change anything to the values and thus make some C++
syntax (like omitting the values) not work.
The string replacement happens on all GLSL files on startup.
I did not measure significant changes in blender startup speed.
There is plans to do all of this at compile time.
We limit the scope of the search to `.h` and `.hh` files to prevent
confusing syntax in `.glsl` files.
There is basic error reporting with file, line and char logging
for easy debuggabiliy.
The requirements to use this enum sharing system are already listed in
`gpu_shader_shared_utils.h` and repeated on top of the preprocessor
function.
Remove small ray offsets that were used to avoid self intersection, and leave
that to the newly added primitive object/prim comparison. These changes together
significantly reduce artifacts on small, large or far away objects.
The balance here is that overlapping primitives are not handled well and should
be avoided (though this was already an issue). The upside is that this is
something a user has control over, whereas the other artifacts had no good
manual solution in many cases.
There is a known issue where the Blender particle system generates overlapping
objects and in turn leads to render differences between CPU and GPU. This will
be addressed separately.
Differential Revision: https://developer.blender.org/D12954
Caused by 0f89bcdbeb where it was needed for cage and evaluated mesh
to have same behavior in respect of having edit_mesh pointer assigned.
This change makes it so that edit_data is not implied to exist when the
edit_mesh pointer is not null. This was already the case in some other
code.
Those cases are almost always synptoms of either bug in code, or broken
files. Re-doin resync on them only costs time and causes extra trash
data as a result, without really helping in any way.
Both new normals (from rBb7fe27314b25) and vpaint (from rBf7bbc7cdbb6c)
RNA arrays were missing the `PROPOVERRIDE_IGNORE`. Those huge blobs of
geometry data should never be processed by liboverride code.
This enables support for node group assets. Previously, node group
assets only worked when the "extended asset browser" experimental
features is enabled.
Differential Revision: https://developer.blender.org/D13748
For node groups there is no good default preview generation.
Nevertheless, t would be useful to generate a preview image for a
node group by rendering an object in some cases.
This commit adds a new operator that allows updating the preview
image for the active asset by rendering the active object.
Note, the operator can also be used for other asset types, not just
node groups.
The operator can be found in a menu right below the refresh-preview
button. Currently it is the only operator in that menu. In the future,
more operators to create previews may be added.
Differential Revision: https://developer.blender.org/D13747
The VSE and node editor only uses an overlay buffer to draw to the screen. The
GPUViewport assumes that platforms clears all textures during creation, but
they do not on selected platforms. What would lead to drawing from
uncleared memory.
This patch fixes this by clearing all viewport textures during creation.
Also adds a few things to GPUShader for easily create shaders.
Heavy usage of macros to compose the createInfo and avoid
duplications and copy paste bugs.
This makes the link between the shader request functions
(in workbench_shader.cc) and the actual createInfo a bit
obscure since the names are composed and not searchable.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D13910
Continuation of work started in 2e221de4ce and 249e4df110.
Adds new tree-element classes for RNA structs, properties and array
elements. This isn't exactly a copy and paste, even though logic should
effectively be the same. Further cleanups are included to share code in
a nice way, improve code with simple C++ features, etc.
This fixes failing test cases when using `make test`.
See {D13615} for more information.
The fix will perform the id remapping one item at a time. Although not
really nice, this isn't a bottleneck.
The failing test cases is because space_node stores pointers multiple
times and didn't update all pointers. It was not clear why it didn't do
it, but changing the behavior more to the previous behavior fixes the
issue at hand.
I prefer to remove the double storage of the node tree pointers (in
snode and path) to reduce pointer management complexity.
During sprite fright loading of complex scenes would spend a long time in remapping ID's
The remapping process is done on a per ID instance that resulted in a very time consuming
process that goes over every possible ID reference to find out if it needs to be updated.
If there are N of references to ID blocks and there are M ID blocks that needed to be remapped
it would take N*M checks. These checks are scattered around the place and memory.
Each reference would only be updated at most once, but most of the time no update is needed at all.
Idea: By grouping the changes together will reduce the number of checks resulting in improved performance.
This would only require N checks. Additional benefits is improved data locality as data is only loaded once
in the L2 cache.
It has be implemented for the resyncing process and UI editors.
On an Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz 16Gig the resyncing process went
from 170 seconds to 145 seconds (during hotspot recording).
After this patch has been applied we could add similar approach
to references (references between data blocks) and functionality (tagged deletion).
In my understanding this could reduce the resyncing process to less than a second.
Opening the village production file between 10 and 20 seconds.
Flame graphs showing that UI remapping isn't visible anymore (`WM_main_remap_editor_id_reference`)
* Master {F12769210 size=full}
* This patch {F12769211 size=full}
Reviewed By: mont29
Maniphest Tasks: T94185
Differential Revision: https://developer.blender.org/D13615
This reverts commit 086f191169.
There was apparently a problem using APPEND which wasn't referenced
in the commit log.
Added comment noting the reason for the discrepancy.
Use more efficient logic for detecting when gizmos are under the cursor.
Even though this isn't a bottleneck, it runs on cursor motion in the
3D viewport, so avoiding any lag here is beneficial.
The common case for cursor motion without any gizmos was always
drawing two passes (one small, then again if nothing was found).
Now a single draw call at the larger size is used.
In isolation this gives around 1.2x-1.4x speedup.
When there are multiple gizmos a depth-buffer picking is used
(similar to object / bone selection) which is more involved but
still only performs 2x draw calls since the result is cached for reuse.
See note in gizmo_find_intersected_3d for a more detailed explanation.
Also restore the depth values in the selection result as they're
needed for gizmos to use selection bias.
Broken since support for GL_SELECT was removed.
Early on in 2.8x development gizmo-depth used GL_SELECT,
which has been removed. Bind the depth buffer so occlusion queries
use the front-most gizmo.
While this report only mentions face-maps, gizmo depth was ignored in
all cases. This wasn't noticeable in most cases though since the
transform gizmo for example was placed so gizmos didn't overlap.
When calling GPU_select_cache_begin, checking the selection mode used
the last used selection mode, not the one about to be used.
Using border select, then picking would not use the selection cache.
This wasn't noticeable by users as failing to use cache just completes
the selection without it (drawing the depth buffer unnecessarily).
The OSL image compilation step needed to be taught about the new UVTILE
format for UDIM textures.
A small missing feature from OIIO[1] means this is a bit uglier than it
needs to be. Once we update to a version of OIIO with the fix we can
remove the string replace part.
[1] 35cb6a83e2
Differential Revision: https://developer.blender.org/D13912
This was already done for APPLE & WIN32, which would
reference these libraries twice.
Now append BROTLI_LIBRARIES to FREETYPE_LIBRARIES when they're
required for linking.
No functional changes as all references to FREETYPE_LIBRARIES also
used BROTLI_LIBRARIES.
When LIBDIR existed, searching for system libraries would always
first search 'LIBDIR'.
This meant "WITH_SYSTEM_*" would still prefer LIBDIR versions of
libraries if they exist.
The presence of LIBDIR also ignored the setting for WITH_STATIC_LIBS
which is now restored to the cached value once pre-compiled libraries
have been handled.
Fix formula in function `SEQ_sound_update_length`.
Formula for sound strip length was changed in commit ded68fb102, when
strip is added to timeline, but it was not changed in function
mentioned above.
This change applies only for automatic proxy building, when strip
is added to timeline. Manual building process is not affected.
Don't build proxy file if movie is already fast enough to seek.
To determine seek performance, check if whole GOP can be decoded
in 100 milliseconds.
To consider some variation in GOP size, large number of packets are
read, assuming that each packet will produce 1 frame. While this is not
technically correct, it does give quite accurate estimate of maximum GOP
size.
This test will ensure consistent performance on wide array of machines.
Check should be done in order of few milliseconds.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11671
This will allow building most deps with VS2019
SDL has some linker issues that are resolved in
a newer version, but that would be better handled
in a separate change.
VS2013 and VS2015 support which was broken has
been removed.
In order to use a workaround builtin uniform, we need to count it
just like other uniforms and give it some space in the name buffer.
This also fixes extensions being added after the uniform declaration.
All `#extension` directives are now part of the gl backend.
This commit moves the weld modifier code to the geometry module
so that it can be used in the "Merge by Distance" geometry node
from ec1b0c2014. The "All" mode is exposed in the node
for now, though we could expose the "Connected" mode in the future.
The modifier itself is responsible for creating the selections from
the vertex group. The "All" mode takes an `IndexMask` for the
selection, and the "Connected" mode takes a boolean array,
since it actually iterates over all edges.
Some disabled code for a BVH mode has not been copied over,
it's still accessible through the patches and git history anyway,
and it made the port slightly simpler.
Differential Revision: https://developer.blender.org/D13907
Previously it was only part of experimental features in beta, however now
renderers can render point clouds generated by geometry nodes. Adding or
converting a point cloud object directly is still hidden by default, since
there is no good way to edit it.
This implements a merge by distance operation for point clouds.
Besides the geometry input, there are two others-- a selection
input to limit the operation to certain points, and the merge
distance. While it would be a reasonable feature, the distance
does not support a field currently, since that would make
the algorithm significantly more complex.
All attributes are merged to the merged points, with the values
mixed together. This same generic method is used for all attributes,
including `position`. The `id` attribute uses the value from the
first merged index for each point.
For the implementation, most of the effort goes into creating a
merge map to speed up attribute mixing. Some parts are inherently
single-threaded, like finding the final indices accounting for the
merged points. By far most of the time is spend balancing the
KD tree.
Mesh support will be added in the next commit.
Differential Revision: https://developer.blender.org/D13649
Only show options that are valid for the used device (CPU, GPU, Multi).
Note: The panel isn't shown for OPTIX anymore, unless Multi device is used.
Reference: https://developer.blender.org/D13592
Make the Embree RTC_SCENE_FLAG_COMPACT flag optional and enabled per default.
Disabling it makes CPU rendering a bit faster in some scenes at the cost of a higher memory usage.
Barbershop renders about 3% faster, victor about 4% on CPU with compact BVH disabled.
Differential Revision: https://developer.blender.org/D13592
Several sub commands tried on their own
to locate python, given I wanted to look
in several locations for a broader libdir
compatibility this is best done in a
central location.
Python 3.9 is still preferred, but if
3.10-3.12 are available that be accepted
as well.
note: this is about the python version
make.bat uses to run various python helper
scripts, this change has no influence on
the python version blender itself uses.
With (center) position, radius and random value outputs.
Eevee does not yet support rendering point clouds, but an untested
implementation of this node was added for when it does.
Ref T92573
Movies with variable frame rate can cause mismatch of displayed frame
when proxies are used. Since proxies are not used for rendering, this
means, that output may be different than expected. This problem can be
avoided when timecodes are used.
Set used timecode to Record Run. Timecodes are built with proxies at
the same time, therefore if proxies are built and used this will
resolve possible mismatch of output.
Record run is chosen, because it will show frames based on time they
were encoded by encoder and should match behavior as if movie was
played back at normal speed. This change is done only for new strips
in order to not overwrite user defined settings.
Other minor changes:
- When proxies are enabled, size 25% is no longer set by default. It was mostly annoying anyway.
- Silence warning when timecode file is not present. This was introduced in 4adbe31e2f.
Previously use of timecodes was hard-coded in sequencer and this error would spam console if timecodes would be
enabled by default and proxies would be never built.
ref: T95093
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D13905
Using a negative linesize to flip an image vertically is supported in
ffmpeg but not for every function.
This method treats frames that need and those that do not need alignment
the same. An RGBA frame buffer with alignment that ffmpeg decides is
optimal for the CPU and build options is allocated by ffmpeg.
The `sws_scale` does the colorspace transformation into this RGBA frame
buffer without flipping. Now the image is upside down and aligned.
The combined unaligning and vertical flipping is then done by
`av_image_copy_to_buffer` which seems to handle negative linesize
correctly.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D13908
Layer resync code would not yet fully properly deal with all possible
invalid status of ViewLayer comming from those older files.
Now put 2.80-doversion specific fixes into their own dedicated
function, so that they do not affect actual regular layer resync code
anymore. Also added some sanity-checks in main
`BKE_layer_collection_sync` code.
The Brotli library only needs to be explicitly linked when using the
statically linked libraries. When using system libs they're shared, and
the .so loading mechanism takes care of dependencies.
Currently the Boolean Math node only has 3 basic logic gates:
AND, OR, and NOT. This commit adds 6 additional logic gates
for convenience and ease of use.
- **Not And (NAND)** returns true when at least one input is false.
- **Nor (NOR)** returns true when both inputs are false.
- **Equal (XNOR)** returns true when both inputs are equal.
- **Not Equal (XOR)** returns true when both inputs are different.
- **Imply (IMPLY)** returns true unless the first input is true and
the second is false.
- **Subtract (NIMPLY)** returns true when the first input is true and
the second is false.
Differential Revision: https://developer.blender.org/D13774
ssize_t is a posix type pyconfig.h previously
supplied for MSVC, it appears to have stopped
doing this in the python 3.10 headers.
Py_ssize_t is the type of the field this macro
actually returns, so best to to use that in our
code as well.
This reverts commit 948211679f.
This commit introduced some regressions in the test suite.
As this change is a core part of blender Bastien and I decided to revert
it as the solution isn't clear and needs more investigation.
The following tests FAILED:
62 - blendfile_liblink (SEGFAULT)
63 - blendfile_library_overrides (SEGFAULT)
It fails in (id_us_ensure_real)
This makes optionnal the use of a different interface for the geometry
shader stage output. When the vertex and geometry interface instance name
matches, a `_in` and `_out` suffix is added to the end of the instance name.
This makes it easier to have optional geometry shader stages.
# Conflicts:
# source/blender/gpu/intern/gpu_shader_create_info.hh
During sprite fright loading of complex scenes would spend a long time in remapping ID's
The remapping process is done on a per ID instance that resulted in a very time consuming
process that goes over every possible ID reference to find out if it needs to be updated.
If there are N of references to ID blocks and there are M ID blocks that needed to be remapped
it would take N*M checks. These checks are scattered around the place and memory.
Each reference would only be updated at most once, but most of the time no update is needed at all.
Idea: By grouping the changes together will reduce the number of checks resulting in improved performance.
This would only require N checks. Additional benefits is improved data locality as data is only loaded once
in the L2 cache.
It has be implemented for the resyncing process and UI editors.
On an Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz 16Gig the resyncing process went
from 170 seconds to 145 seconds (during hotspot recording).
After this patch has been applied we could add similar approach
to references (references between data blocks) and functionality (tagged deletion).
In my understanding this could reduce the resyncing process to less than a second.
Opening the village production file between 10 and 20 seconds.
Flame graphs showing that UI remapping isn't visible anymore (`WM_main_remap_editor_id_reference`)
* Master {F12769210 size=full}
* This patch {F12769211 size=full}
Reviewed By: mont29
Maniphest Tasks: T94185
Differential Revision: https://developer.blender.org/D13615
This patch migrates the draw manager hair refine compute shader to use
GPUShaderCreateInfo.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D13915
Allows to perform correction of coordinate delta/displacement in a
similar way of how sculpt mode handles sculpting on a deformed mesh.
An example of usecase of this is allowing riggers and sciprters to
improve corrective shapekey workflow.
The usage consists of pre-processing and access. For example:
object.crazyspace_eval(depsgraph, scene)
# When we have a difference between two vertices and want to convert
# it to a space to be stored, say, in shapekey:
delta_in_orig_space = rigged_ob.crazyspace_displacement_to_original(
vertex_index=i, displacement=delta)
# The reverse of above.
delta_in_deformed_space = rigged_ob.crazyspace_displacement_to_deformed(
vertex_index=i, displacement=delta)
object.crazyspace_eval_clear()
Fuller explanation with actual usecases and studio examples are written in
the comment:
https://developer.blender.org/D13892#368898
Differential Revision: https://developer.blender.org/D13892
Brotli seems to add a custom postfix to its static libraries by default,
but in Debian at least libraries are just named the same for both shared
and static versions, as usual.
So add standard name after static-specific ones.
Follow-up to rB4c617c06e9cb and rBa000de7c2a4d.
The evaluated mesh is a result of evaluated modifiers, and referencing
other evaluated IDs such as materials.
It can not be stored in the EditMesh structure which is intended to be
re-used by many areas. Such sharing was causing ownership errors causing
bugs like
T93855: Cycles crash with edit mode and simultaneous viewport and final render
The proposed solution is to store the evaluated edit mesh and its cage in
the object's runtime field. The motivation goes as following:
- It allows to avoid ownership problems like the ones in the linked report.
- Object level is chosen over mesh level is because the evaluated mesh
is affected by modifiers, which are on the object level.
This patch allows to have modifier stack of an object which shares mesh with
an object which is in edit mode to be properly taken into account (before
the change the modifier stack from the active object will be used for all
objects which share the mesh).
There is a change in the way how copy-on-write is handled in the edit mode to
allow proper state update when changing active scene (or having two windows
with different scenes). Previously, the copt-on-write would have been ignored
by skipping tagging CoW component. Now it is ignored from within the CoW
operation callback. This allows to update edit pointers for objects which are
not from the current depsgraph and where the edit_mesh was never assigned in
the case when the depsgraph was evaluated prior the active depsgraph.
There is no user level changes changes expected with the CoW handling changes:
should not affect on neither performance, nor memory consumption.
Tested scenarios:
- Various modifiers configurations of objects sharing mesh and be part of the
same scene.
- Steps from the reports: T93855, T82952, T77359
This also fixes T76609, T72733 and perhaps other reports.
Differential Revision: https://developer.blender.org/D13824
The Equalize Handles operator allows users to make selected handle
lengths uniform: either respecting their original angle from the key
control point or by flattening their angle (removing the overshoot
sometimes produced by certain handle types).
Design: T94172
Reviewed by: sybren
Differential Revision: https://developer.blender.org/D13702
Some IDs (like text ones) can be linked and only kept around thanks to
editors, allow making such IDs local in `BKE_lib_id_make_local_generic`.
Also refactor logic checking whether ID should be made directly local or
copied into its own util function, so that we can remain sure all
special-cases 'make local' code still uses the same logic here.
Currently there are many function declarations in `BKE_node.h` that
don't actually have implementations in blenkernel. This commit moves
the declarations to `NOD_composite.h`, `NOD_texture.h`, and
`NOD_shader.h` instead. This helps to clarify the purpose of the
different modules.
Differential Revision: https://developer.blender.org/D13869
Fixes T93680
For current drivers of Intel HD Graphics 4400 and 4600, various Program Introspection functions appear broken and return incorrect values, causing crashes in the current handling of SSBOs. Disable use of this feature on those devices. Add checks to features that use SSBOs (Hair and Subdivision Modifier).
Reviewed By: fclem, jbakker
Maniphest Tasks: T93680
Differential Revision: https://developer.blender.org/D13806
The point IBO should only have data for coarse vertices (or in general,
the vertices in the original mesh). As it used for displaying the
vertices for selection in edit mode, and as it indexes into the VBOs for
the positions and edit data, it is itself only indexed by coarse/
original vertex index.
For the subdivision case, this would allocate space for the final
subdivision vertex and reallocate to make room for loose geometry,
although only the first coarse vertex count amount of data would be.
Now just allocate for the required memory. Also reuse index buffer APIs
instead of doing manual work.
unity launches blender in background mode to do some
file conversions, ever since the launcher got introduced
this process broke.
The root cause here is: Unity looks up the default program
to launch .blend files with, which is now the launcher, then
launches it in background mode with a script to export the data.
The launcher however was designed to exit as quickly as
possible so there would not be an extra background process
lingering. It does not wait for blender to exit and does not
pass back any error codes.
This broke unity's workflow since it assumed if the process
exits and succeeds the data *must* be ready for reading which
no longer holds true.
This change keeps the launcher design as was previously,
*except* when launching in background mode, then it
waits and passes back any error codes, thus restoring
unity's workflow.
Differential Revision: https://developer.blender.org/D13894
Reviewed by: LazyDodo, Brecht
Previously weight paint wasn't hooked up to the "Smooth" and "Invert" modes.
With this patch it is not possible to use the "Smooth" and "Invert"
modifiers for the draw keybindings.
Reviewed By: Campbell Barton
Differential Revision: http://developer.blender.org/D13857
Add `libbrotlidec-static.a` and `libbrotlicommon-static.a` to the CMake
`$FREETYPE_LIBRARIES` variable; they'll be required when the Linux libs
for the FreeType upgrade lands (D13448).
The order of libraries is different compared to the similar lines in the
Windows and Apple CMake files, to prevent linker errors on Linux.
Some drivers/glsl compilers will not warn about multiple resources using
the same binding, creating silent errors.
This patch checks for this case and outputs a descriptive error message if
a particular createInfo merge error is founds.
Other validation can be added later.
This patch introduces an extrude node with three modes. The vertex mode
is quite simple, and just attaches new edges to the selected vertices.
The edge mode attaches new faces to the selected edges. The faces mode
extrudes patches of selected faces, or each selected face individually,
depending on the "Individual" boolean input.
The default value of the "Offset" input is the mesh's normals, which
can be scaled with the "Offset Scale" input.
**Attribute Propagation**
Attributes are transferred to the new elements with specific rules.
Attributes will never change domains for interpolations. Generally
boolean attributes are propagated with "or", meaning any connected
"true" value that is mixed in for other types will cause the new value
to be "true" as well. The `"id"` attribute does not have any special
handling currently.
Vertex Mode
- Vertex: Copied values of selected vertices.
- Edge: Averaged values of selected edges. For booleans, edges are
selected if any connected edges are selected.
Edge Mode
- Vertex: Copied values of extruded vertices.
- Connecting edges (vertical): Average values of connected extruded
edges. For booleans, the edges are selected if any connected
extruded edges are selected.
- Duplicate edges: Copied values of selected edges.
- Face: Averaged values of all faces connected to the selected edge.
For booleans, faces are selected if any connected original faces
are selected.
- Corner: Averaged values of corresponding corners in all faces
connected to selected edges. For booleans, corners are selected
if one of those corners are selected.
Face Mode
- Vertex: Copied values of extruded vertices.
- Connecting edges (vertical): Average values of connected selected
edges, not including the edges "on top" of extruded regions.
For booleans, edges are selected when any connected extruded edges
were selected.
- Duplicate edges: Copied values of extruded edges.
- Face: Copied values of the corresponding selected faces.
- Corner: Copied values of corresponding corners in selected faces.
Individual Face Mode
- Vertex: Copied values of extruded vertices.
- Connecting edges (vertical): Average values of the two neighboring
edges on each extruded face. For booleans, edges are selected
when at least one neighbor on the extruded face was selected.
- Duplicate edges: Copied values of extruded edges.
- Face: Copied values of the corresponding selected faces.
- Corner: Copied values of corresponding corners in selected faces.
**Differences from edit mode**
In face mode (non-individual), the behavior can be different than the
extrude tools in edit mode-- this node doesn't handle keeping the back-
faces around in the cases that the edit mode tools do. The planned
"Solidify" node will handle that use case instead. Keeping this node
simpler and faster is preferable at this point, especially because that
sort of "smart" behavior is not that predictable and makes less sense
in a procedural context.
In the future, an "Even Offset" option could be added to this node
hopefully fairly simply. For now it is left out in order to keep
the patch simpler.
**Implementation**
For the implementation, the `Mesh` data structure is used directly
rather than converting to `BMesh` and back like D12224. This optimizes
for large extrusion operations rather than many sequential extrusions.
While this is potentially more verbose, it has some important benefits:
First, there is no conversion to and from `BMesh`. The code only has
to fill arrays and it can do that all at once, making each component of
the algorithm much easier to optimize. It also makes the attribute
interpolation more explicit, and likely faster. Only limited topology
maps must be created in most cases.
While there are some necessary loops and allocations with the size of
the entire mesh, I tried to keep everything I could on the order of the
size of the selection rather than the size of the mesh. In that respect,
the individual faces mode is the best, since there is no topology
information necessary, and the amount of work just depends on the size
of the selection.
Modifying an existing mesh instead of generating a new one was a bit
of a toss-up, but has a few potential benefits:
- Avoids manually copying over attribute data for original elements.
- Avoids some overhead of creating a new mesh.
- Can potentially take advantage of future ammortized mesh growth.
This could be changed easily if it turns out to be the wrong choice.
Differential Revision: https://developer.blender.org/D13709
When moving to C++ field for initialization was removed.
Favor assignments to field names as it reads better and avoids bugs if
files are ever re-arranged as well as mistakes (see T94784).
Note that the generated optimized output is identical with GCC11.
This adds a selection field input to the node, faces that are selected and
meet the minimum vertex count threshold will be triangulated.
Differential Revision: https://developer.blender.org/D13804
Add a boolean option to have the Curve Handle Position input node return the
position of the handle relative to each point position.
Differential Revision: https://developer.blender.org/D12947
A large polygon in the file from the report caused `alloca`
to exceed the maximum stack size, causing a crash. Instead
of using `alloca`, use `blender::Array` with an inline buffer.
Based on a patch by Germano Cavalcante (@mano-wii).
Differential Revision: https://developer.blender.org/D13898
When enabled, it will keep contour around the object instead of hide them by rule of face mark,
so the object can always have full contour while filtering out some of the feature lines inside certain regions.
Reviewed By: Antonio Vazquez (antoniov), Aleš Jelovčan (frogstomp)
Differential Revision: https://developer.blender.org/D13847
Option to discard back faced triangles, this speeds up calculation especially for when you only want to show visible feature lines.
Reviewed By: Antonio Vazquez (antoniov), Aleš Jelovčan (frogstomp)
Differential Revision: https://developer.blender.org/D13848
Instead of splitting it at each occlusion change, it tolerates short segments of "zig-zag" occlusion incoherence and doesn't split the chain at these points, thus creating a much smoother result.
Reviewed By: Antonio Vazquez (antoniov), Aleš Jelovčan (frogstomp)
Differential Revision: https://developer.blender.org/D13851
This gives a modest speedup as calculating tessellation and face
normals at the same time can be more efficiently multi-threaded.
Also avoids calculating face normals twice,
oversight in d590e223da.
This commit improves NURBS knot generation by adding proper support
for the combination of the Bezier and cyclic options. In other cases
the resulting knot doesn't change. This cyclic Bezier knot is used to
create accurate accurate "Nurbs Circle", "Nurbs Cylinder" primitives.
"Nurbs Sphere" and "Nurbs Torus" primitives are also improved by
tweaking the spin operator.
The knot vector in 3rd order NURBS curve with Bezier option turned on
(without cyclic) is changed in comparison to previous calculations,
although it doesn't change the curve shape itself.
The accuracy of the of NURBS circle is fixed, which can be checked by
comparing with mesh circle. Tessellation spacing differences in
circular NURBS is also fixed, which is observable with the NURBS
cylinder and sphere primitives. These were causing seam-like effects.
This commit contains comments from Piotr Makal (@pmakal).
Differential Revision: https://developer.blender.org/D11664
Normal layers currently aren't stored in the undo step
mesh storage, since they are not stored in files at all.
However, the edit mesh expects normals to be fully
calculated, and does not keep track of a dirty state.
This patch updates the normals in the BMesh created
by loading an undo step.
Another option would be calculating the normals on
the undo mesh first, which might be better if Mesh
normal calculation is faster than BMesh calculation,
but the preferred method to access vertex normals fails
in this case, because the mesh runtime mutexes are not
initialized for undo-state meshes.
Differential Revision: https://developer.blender.org/D13859
From an error in rBcfa53e0fbeed, the vertex normals in `SculptSession`
seem to be used, but in the case when no "pbvh" is used, the value of
the pointer is never assigned.
Normals were not generally dirty before this "ensure" function with
regular sculpting operations, so this addition shouldn't have any cost.
Differential Revision: https://developer.blender.org/D13854
All other nodes with data type and domain choices have the domain
below the data type. Generally that order makes sense, because it's
consistent with nodes that have no domain drop-down.
Because this operator is used on original objects, it's best to tag
the normals dirty instead of explicitly calculating them, to avoid
unnecessarily storing normal layers on an original object (since
they might have to be recalculated during evaluation anyway).
There may be other places this change is helpful, but being
conservative is likely better for now.
Related to T95125
The new OBJ exporter did not handle object instances.
The fix is to use a dependency graph iterator, asking for instances.
Unfortunately that iterator makes a temporary copy of instance objects
that does not persist past the iteration, but we need to save all the
objects and meshes to write later, so the Object has to be copied now.
This changed some unit tests. Even though the tests don't have instancing,
the iterator also picks up some Text objects as Mesh ones (which is a good
thing), resulting in two more objects in the all_objects.obj file output.
With object collection properties open there was a huge delay when
switching active objects in a large scene, (~10k objects, ~5m vertices).
This is due to a non-optimal function to query all the collections the object is in.
To solve this the code can be simplified by using `bpy.types.Object.users_collection`
This returns all the collections the object is in removing the need to compute this in python.
The UI team requested adding woff2 support to freetype.
this required a new dependency brotli.
This changes adds brotili to the builder and bumps
freetype to version 2.11.0
As freetype now depends on other libraries, for consistency
all use of ${FREETYPE_LIBRARY} in cmake has been updated to
use ${FREETYPE_LIBRARIES} adjustments have been made in the
windows platform file, all other platforms use cmake's
FindFreeType.cmake which already sets this variable.
reviewed by: brecht
Differential Revision: https://developer.blender.org/D13448
This node can scale individual edges and faces. When multiple selected
faces/edges share the same vertices, they are scaled together.
The center and scaling factor is averaged in this case.
For some examples see D13757.
Differential Revision: https://developer.blender.org/D13757
Currently there is no way to flip normals in geometry nodes. This node
makes that possible by flipping the winding order of selected faces.
The node is purposely not called "Flip Normals", because normals are
derived data, changing them is only a side effect. The real change is
that the vertex and edge indices in the face corners of every selected
polygon are reversed, and face corner attribute data is reversed.
While there are existing utilities to flip a polygon and its custom
data, this node aims to process an attribute's data together instead
of processing all attributes separately for each index.
Differential Revision: https://developer.blender.org/D13809
Adds a second output to the Mesh Islands node that shows the total
number of islands as a field.
Differential Revision: https://developer.blender.org/D13700
This is not currently working, with an internal compiler error. However
we are currently using BVH2 instead of Metal RT. So this has no effect for
users, it's being committed to avoid the code getting outdated.
Ref T92573, T92212
Differential Revision: https://developer.blender.org/D13632
This shader needs to use the same interface as the OCIO shader. On Linux
and Windows this seems to be the case. On MacOS however there is a
mismatch that makes the overlay texture to be completely black when
switching to workbench in the Shader workspace.
This is just a temporarily work-around as this should be solved. Due to
the poor GPU debugging facilities on Mac we haven't been able to
pin-point the root cause.
Editing of generic attributes on the original objects in edit modes is
still very limited. However, when applying a geometry nodes modifier
that generates new attributes. These attributes will show up in the
Attributes panel.
Currently, our exporters are not capable of exporting generic attributes.
Therefore, for the time being, a work around is to apply geometry nodes
and then convert a generic attribute to a task specific attribute like a
uv map, vertex group or vertex color layer. Once more parts of Blender
support generic attributes, this will become less important.
Currently, only meshes are supported by the operator. However, it would
be relatively easy to extend it to other geometry types.
Differential Revision: https://developer.blender.org/D13838
Allow any non-modifier keyboard events to be used.
Note that the existing check for >= EVT_AKEY allowed NDOF and other
non-keyboard events (including modifiers, which didn't work).
- Use defines instead of magic numbers for F-Key & NDOF range checks.
- Use explicit values for NDOF event types.
- Minor clarification to doc-strings.
- Use doxy-sections.
There is probably a better solution that's possible, but the few other
things I tried didn't work, and the build error should be resolved for
the buildbots. This is similar to the "breaks" in the namespace for
functions declared in `ED_node.h`.
The code here was using velocity based interpolation copied from particles.
However there is no velocity cached in the rigid body point cache so the
results were non-sensical.
This adds a new curve primitive to generate arcs.
Radius mode (default): Generates a fixed radius arc on XY plane
with controls for Angle, Sweep and Invert.
Points mode: Generates a three point curve arc from Start to End
via Middle with an Angle Offset and option to invert the arc.
There are also outputs for arc center, radius and normal direction
relative to the Z-axis.
This patch is based on previous patches
D11713 and D13100 from @guitargeek. Thank you.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D13640
This fixes a similar issue as the previous commit, but this time the
continuous notifiers would be sent after redoing. E.g. after moving an
object, and then modifying the transform in the "Adjust Last Operation"
panel.
The thumbnail caching continuously sends `ND_SPACE_FILE_PREVIEW`
notifiers via a timer. But this timer was never ended properly after
thumbnails are fully loaded into the cache.
Wouldn't actually cause a refresh or redraw, send and process the
notifiers.
I already tried to avoid this for the asset view template, but
apparently that wasn't working correctly. For the File/Asset Browser I
never applied that fix to avoid possible regressions before the release.
This commit moves code in all node editor files to the
`blender::ed::space_node` namespace, except for C API
functions defined in `ED_node.h`, which can only be moved
once all areas calling them are moved to C++.
The change is fairly straightforward, I just moved a couple
of "ED_" code blocks around to make the namespace more
contiguous, and there's the method for adding a pointer to
a struct in a C++ namespace in DNA.
Differential Revision: https://developer.blender.org/D13871
This patch fixes a correctness issue discovered in the `int4 select(...)` function on Apple Silicon machines, which causes bad bvh2 builds. Although the generated bvh2s give correct renders, the resulting runtime performance is terrible. This fix allows us to switch over to bvh2 on Apple Silicon giving a significant performance uplift for many of the standard benchmarking assets. It also fixes some unit test failures stemming from the use of MetalRT, and trivially enables the new pointcloud primitive.
Ref T92212
Reviewed By: brecht
Maniphest Tasks: T92212
Differential Revision: https://developer.blender.org/D13877
Custom bones are drawn by instancing the GPUBatch of the base object. To
access the mesh and its GPUBatch, `BKE_object_get_evaluated_mesh` was
used. However, since GPU subdivision support, this will return a
subdivision wrapper which will never be drawn, and thus will have an
invalid batch, which caused the crash.
`BKE_object_get_evaluated_mesh_no_subsurf` should be used instead, to
return the mesh that will be drawn, and have the subdivision evaluated
on the GPU. Note that the rest of the draw code is already using this
function.
This adds vertex creasing support for OpenSubDiv for modeling, rendering,
Alembic and USD I/O.
For modeling, vertex creasing follows the edge creasing implementation with an
operator accessible through the Vertex menu in Edit Mode, and some parameter in
the properties panel. The option in the Subsurf and Multires to use edge
creasing also affects vertex creasing.
The vertex crease data is stored as a CustomData layer, unlike edge creases
which for now are stored in `MEdge`, but will in the future also be moved to
a `CustomData` layer. See comments for details on the difference in behavior
for the `CD_CREASE` layer between egdes and vertices.
For Cycles this adds sockets on the Mesh node to hold data about which vertices
are creased (one socket for the indices, one for the weigths).
Viewport rendering of vertex creasing reuses the same color scheme as for edges
and creased vertices are drawn bigger than uncreased vertices.
For Alembic and USD, vertex crease support follows the edge crease
implementation, they are always read, but only exported if a `Subsurf` modifier
is present on the Mesh.
Reviewed By: brecht, fclem, sergey, sybren, campbellbarton
Differential Revision: https://developer.blender.org/D10145
This brush fixes the random spikes that
occasionally happen in multires models.
These spikes can be nearly impossible to
fix manually and can make working with
multires a nightmare.
Since vertex and face normals are now stored on the mesh when necessary,
we can expose them as contiguous arrays of vectors in the Python API.
This can give render engines and other addons easy access to they data
for fast access through a regular collection property.
While "Mesh Vertex" still has a "normal" property in RNA, that is only
maintained in order to avoid breaking the existing API, and accessing
it is less efficient than accessing the normals directly.
I made the normal arrays read-only, because modifying them could
put them in an invalid state. This is inline with how we treat the data
internally, and helps keep relationships between data clear.
Differential Revision: https://developer.blender.org/D13839
When toggling to a File Browser from an Asset Browesr, the asset indexer
would be used to load files. I couldn't spot issues with that on a
quick look, but this should still be corrected.
Adds an "Asset Indexing" option (enabled by default) to Preferences >
Experimental > Debugging. This is useful when working on the asset
library loading.
An external CMake script can be used to debug CMake code, modify/read
target properties, inter-target dependencies, non-cache variables etc.
Reviewed by: LazyDodo, brecht
Differential Revision: https://developer.blender.org/D13830
This patch fixes crash T94736 on Metal in which the launch_params were not being updated to reflect destruction of MetalMem objects.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D13875
When copying strips between 2 scenes, it wasn't possible to copy
animation curves along with strips.
In this patch curves are copied into clipboard `ListBase`. When pasted,
original curves are moved into temporary `ListBase` and curves in
clipboard are moved into scene action. This is because when strips from
clipboard have to be renamed, function `SEQ_ensure_unique_name()` does
fix RNA paths of curves, but this is done globally for all curves within
action. After strips are renamed, restore original curves from backup.
Note: This patch handles only fcurves. Drivers and actions are currently
not handled anywhere in VSE.
Fixes T77530
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D13845
- Move functions that handle animation to own file - `animation.c`
- Refactor `SEQ_offset_animdata` and `SEQ_free_animdata` functions
- Add function `SEQ_fcurves_by_strip_get` to provide more granular
and explicit way for operators to handle animation
- Remove function `SEQ_dupe_animdata`, do curve duplication explicitly
in operator code, which makes more sense to do. Further this function
was also used for renaming strips which makes no sense.
- Refactor usage of function `SEQ_free_animdata` and remove XXX comment.
Now this functiuon is no longer called when `Sequence` data is freed
implicitly, it is done explicitly in high level function
`SEQ_edit_remove_flagged_sequences`
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D13852
The ustring is not a trivially copyable object from the C++ standard
point of view, so using memcpy on it is strictly wrong. In practice,
however, this is OK since it is just a thin wrapper around char*.
For now use explicit cast to void* same as it was done in other places
of ccl::array implementation. But also localize the place where memory
copy happens to make it easier to support proper non-trivial C++
objects in the future.
This merge the description into one struct only that can be more easily
copied during `finalize()`.
The in and out layout parameters are better named and extended with the
invocation count (with fallback support)
Route cause was data alignment mismatch between GPU and CPU. This
mismatch would not allow us to bind the UBO where data wasn't available
on the GPU.
Fixed by using float4 in stead of float2. This could eventually be
packed, but that would lead to less readable code.
Cause was incorrect logic when generating the resource layout. It the
explicit_location_support setting was ignored and the binding were
generated for image, uniform buffers and storage buffers.
- Add BM_mesh_debug_print & BM_mesh_debug_info.
- Report flags in Mesh.cd_flag in BKE_mesh_debug_print
- Move custom data printing into customdata.cc (noted as a TODO).
Note that the term "runtime" has been removed from
`BKE_mesh_runtime_debug_print` since these are useful for debugging any
kind of mesh data.
Code that handled merging & initializing custom-data from other
meshes sometimes missed checks for this flag, causing bevel weights to
lost when the mesh was converted to a BMesh.
The following changes are a more general fix for T94197.
- Add BM_mesh_copy_init_customdata_from_mesh_array which initializes
custom-data from multiple meshes at once.
As well as initializing custom-data layers from Mesh.cd_flag.
This isn't essential for boolean, however it avoids the overhead of
resizing custom-data layers.
- Loading mesh data into a BMesh now respects Mesh.cd_flag
instead of only checking if the BMesh custom-data-layer exists.
Without this, the order of meshes passed to BM_mesh_bm_from_me could
give different (incorrect) results.
- Copying mesh data now copies `cd_flag` too. This is a precaution
as in my tests evaluating modifiers these values always matched.
Nevertheless it's correct to copy this value as custom-data it's
self is being copied.
The buffer passed as an argument to `GPUFrameBuffer.read_color` is used
in the return of the function and therefore, if not used, its refcount is
decremented.
So be sure to increment the refcount of the already existing objects that
will be used in the return of a function.
This was the case for multi input sockets that have a link already.
Since we have multi input sockets, the way we use `socket_is_available`
is not really giving the expected result on these.
When used for input sockets the intention is to find a free socket
(either for noodle **replacement**, then it is always available, or just
the next free available socket).
Now I would think without the intention to replace an existing link, a
multi input socket should still be available.
From the inside of the function, the `replace` argument turns [namewise]
to `allow_used`, which sounds a little different (so one might argue
that if `allow_used` is `False` this should also trigger for already
connected multi input sockets).
In the end, this is an issue with the variable naming though, cant think
of a usecase where the patch change would really go against intentions.
Maniphest Tasks: T93413
Differential Revision: https://developer.blender.org/D13866
Bug possibly introduced in {rBc57e4418bb85aec8bd3615fd775b990badb43d30}.
Interestingly, the orientation set before (NORMAL), even different from
the orientation that was actually used, was allowing the use of
"orient_matrix" ("orient_matrix_type" should have been NORMAL in that
case too).
In any case, make sure the "orient_matrix_type" and "orient_type" are the
same so that the "orient_matrix" is used.
These operations (sorting and selecting all nodes) should generally
be handled by the node editor and not outside code. They were not
called outside of the node editor, so they can be moved to the editor's
`intern` header.
This file was added nine years ago, and was unused then.
Now with active tools we use a different approach to create
toolbars, so the file is not relevant.
This node allows accessing data of other elements in the context geometry.
It is similar to the Transfer Attribute node in Index mode. The main difference
is that this node does not require a geometry input, because the context
is used.
The node can e.g. be used to generalize what the Edge Vertices node is doing.
Instead of only being able to get the position of the vertices of an edge,
any field/attribute can be accessed on the vertices.
Differential Revision: https://developer.blender.org/D13825
Adds a second output to the edge angle node that shows the signed angle
between the two faces, where Convex angles are positive and Concave angles
are negative. This calculation is slower than the unsigned angle, so it
was best to leave both for times where the unsigned angle will suffice.
Differential Revision: https://developer.blender.org/D13796
It's now easier than before to do the interpolation of attributes
only for the elements that are actually used in some cases.
This can result in a speedup because unnecessary computations
can be avoided. See the patch for a simple performance test.
Differential Revision: https://developer.blender.org/D13828
Cause of the issue isn't that clear, but the NVIDIA GLSL compiler
complained that it couldn't find an overloaded function when the second
parameter is an interger. This change fixes it by using a float.
Display exact integer values of a floating point fields without
a fraction if the step is also an exact integer. This is intended
for cases when the value can technically be fractional, but most
commonly is supposed to be integer.
This handling is not applied if the field has any unit except frames,
because integer values aren't special for quantities like length.
The fraction is discarded in the normal display mode and when copying
the value to clipboard, but not when editing to remind the user that
the field allows fractions.
Differential Revision: https://developer.blender.org/D13753
Fix a precision issue when stepping down from 1 to 0 via the left
decrement button and step 100 results in a small nonzero value.
The reason is that 0.01 can't be precisely represented in binary
and converting to double before multiplication reveals this.
Ref D13753
This patch converts GPU_SHADER_2D_IMAGE_MULTI_RECT_COLOR shader to use
the GPUShaderCreateInfo pattern. It can be used as a reference when
converting other shaders.
In this special case the flat uniform vector cannot be used anymore as it
doesn't fit as push constants. To solve this a uniform buffer is used.
The previous optimization did not work in general yet, unfortunately.
This change makes the code more correct, but also brings back
some unnecessary updates (e.g. when creating a node group).
For boolean operations only one of the meshes was checked to determine
if bevel weights should be created.
Now initialize custom data from both meshes flag.
Note that this is a localized fix to be back-ported, further changes
will be made so edit-mode conversion accounts for this
without the caller needing explicit checks for custom-data flags.
Asset indexing was disabled as ID property indexing wasn't supported.
Now that ID property support is added we can enable asset indexing.
Check {T91406} for more information about asset indexing.
Object/collection asset workflow would need the bounding box for snapping.
The bounding box is stored using ID properties in the scene. Currently ID properties
aren't stored in the asset index, what would break object snapping. For this reason
Asset Indexing is turned off in mater. This patch will introduce the indexing of ID
properties what will allow the indexing to be turned on again.
## Data Mapping ##
For data mapping we store the internal structure of IDProperty to the indexer (including meta-data) to be able to deserialize it back.
```
[
{
"name": ..,
"value": ..,
"type": ..,
/* `subtype` and `length` are only available for IDP_ARRAYs. */
"subtype": ..,
},
]
```
| **DNA** | **Serialize type** | **Note** |
| IDProperty.name | StringValue| |
| IDProperty.type | StringValue| "IDP_STRING", "IDP_INT", "IDP_FLOAT", "IDP_ARRAY", "IDP_GROUP", "IDP_DOUBLE"|
| IDProperty.subtype | StringValue| "IDP_INT", "IDP_FLOAT", "IDP_GROUP", "IDP_DOUBLE" |
| IDProperty.value | StringValue | When type is IDP_STRING |
| IDProperty.value | IntValue | When type is IDP_INT |
| IDProperty.value | DoubleValue | When type is IDP_FLOAT/IDP_DOUBLE |
| IDProperty.value | ArrayValue | When type is IDP_GROUP. Recursively uses the same structure as described in this section. |
| IDProperty.value | ArrayValue | When type is IDP_ARRAY. Each element holds a single element as described in this section. |
NOTE: IDP_ID and IDP_IDARRAY aren't supported. The entry will not be added.
Example
```
[
{
"name": "MyIntValue,
"type": "IDP_INT",
"value": 6,
},
{
"name": "myComplexArray",
"type": "IDP_ARRAY",
"subtype": "IDP_GROUP",
"value": [
[
{
"name": ..
....
}
]
]
}
]
```
## Considered alternatives ##
- Add conversion functions inside `asset_indexer`; makes generic code part of a specific solution.
- Add conversion functions inside `BLI_serialize`; would add data transformation responsibilities inside a unit that is currently only responsible for formatting.
- Use direct mapping between IDP properties and Values; leads to missing information and edge cases (empty primitive arrays) that could not be de-serialized.
Reviewed By: Severin, mont29, HooglyBoogly
Maniphest Tasks: T92306
Differential Revision: https://developer.blender.org/D12990
Motion paths themselves aren't getting saved (not sure if they are
without overrides), but being able to override options makes them
usable even if it's necessary to regenerate every edit session.
Differential Revision: https://developer.blender.org/D13842
Some new obj exporter tests were disabled because the normals were different
in the last decimal place on different platforms.
The old python exporter deduped normals with their coordinates rounded to
four decimal places. This change does the same in the new exporter.
On one test, this produced a file 25% smaller and even ran 10% faster.
This can simplify iterating through all of the indices in the vector,
which is fairly common, since one of the benefits of the data structure
is that all values are contiguous.
This node's UI uses a multi-select enum to allow adjusting the
type of both handle sides with the same node. Since usually the
user wants to affect both handles, and it's the multi-select behavior
isn't obvious, selecting both by default is an improvement.
This significantly reduces discontinuities on UV seams, by giving a better
match of the texture filtered colors on both sides of the seam. It works by
using pixels from adjacent faces across the UV seam.
This new option is called "Adjacent Faces" and is the default. The old option
is called "Extend", and extends border pixels outwards.
Differential Revision: https://developer.blender.org/D13303
Use GPU-side scaling to speed up the scaling itself, and to avoid having
to copy the image buffer using the CPU. Mipmapping is used to get decent
filtering when downscaling without ugly artifacts.
In my comparisons, there was barely any difference between the methods
for DPIs >= 1. Below that, the result looks a bit different due to the
different filtering method.
See D13144 for screen-recordings showing the difference.
Part of T92922.
Differential Revision: https://developer.blender.org/D13144
Reviewed by: Jeroen Bakker
Typo in rB605cdc4346e5f82, both `eBlendfileLinkAppendForeachItemFlag`
flags had the same value, effectively preventing to filter out direct
vs. indirect appended items.
Override layers are a standard feature of Alembic, where archives can override
data from other archives, provided that the hierarchies match.
This is useful for modifying a UV map, updating an animation, or even creating
some sort of LOD system where low resolution meshes are swapped by high resolution
versions.
It is possible to add UV maps and vertex colors using this system, however, they
will only appear in the spreadsheet editor when viewing evaluated data, as the UV
map and Vertex color UI only show data present on the original mesh.
Implementation wise, this adds a `CacheFileLayer` data structure to the `CacheFile`
DNA, as well as some operators and UI to present and manage the layers. For both
the Alembic importer and the Cycles procedural, the main change is creating an
archive from a list of filepaths, instead of a single one.
After importing the base file through the regular import operator, layers can be added
to or removed from the `CacheFile` via the UI list under the `Override Layers` panel
located in the Mesh Sequence Cache modifier. Layers can also be moved around or
hidden.
See differential page for tests files and demos.
Reviewed by: brecht, sybren
Differential Revision: https://developer.blender.org/D13603
This is a first part of the Shader Create Info system could be.
A shader create info provides a way to define shader structure, resources
and interfaces. This makes for a quick way to provide backend agnostic
binding informations while also making shader variations easy to declare.
- Clear source input (only one file). Cleans up the GPU api since we can create a
shader from one descriptor
- Resources and interfaces are generated by the backend (much simpler than parsing).
- Bindings are explicit from position in the array.
- GPUShaderInterface becomes a trivial translation of enums and string copy.
- No external dependency to third party lib.
- Cleaner code, less fragmentation of resources in several libs.
- Easy to modify / extend at runtime.
- no parser involve, very easy to code.
- Does not hold any data, can be static and kept on disc.
- Could hold precompiled bytecode for static shaders.
This also includes a new global dependency system.
GLSL shaders can include other sources by using #pragma BLENDER_REQUIRE(...).
This patch already migrated several builtin shaders. Other shaders should be migrated
one at a time, and could be done inside master.
There is a new compile directive `WITH_GPU_SHADER_BUILDER` this is an optional
directive for linting shaders to increase turn around time.
What is remaining:
- pyGPU API {T94975}
- Migration of other shaders. This could be a community effort.
Reviewed By: jbakker
Maniphest Tasks: T94975
Differential Revision: https://developer.blender.org/D13360
For an upcoming refactoring of library remapping we want to be able to test if the logic won't change.
It also increased my experience inside the remapping codebase and find out what exactly needed to
be refactored.
This patch adds test cases for the core functionality of `foreach_libblock_remap_callback`. The test cases
don't cover of all the branches. Also pre-, post-processing, referencing and proxies are not tested.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D13815
Allows conveniently selecting an inverse of a collection.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D13846
This patch improves conversion method from NURBS to Bezier curves,
resulting in exact shape between those two types when provided with
a 3rd degree NURBS curve. Part of T86086.
See the differential revision for more comparisons.
The node still cannot account properly for a NURBS "order" other
than 4 and it does not take into account control point weights.
Differential Revision: https://developer.blender.org/D13546
Fix the description for WORKSPACE_OT_reorder_to_back to say "last" in
list rather than "first"
See D13696 for more details.
Differential Revision: https://developer.blender.org/D13696
Reviewed by Aaron Carlisle
The crash is due to the fact that GPU subdivision extraction routines
for edit data (including UVs) only worked for BMesh. However, a Mesh
based version is still needed for texture painting. This adds the
missing components. This also ensures all data are properly initialized
(at least the ones revealed by the bug).
This puts the loop over the final subdivision quads outside of the mesh
iteration callback. This can also allow for easier parallel execution in
the future if need be.
Since the option to enable linkers are booleans,
it's possible to enable them all at once.
Now only the first enabled + available linker is used
(with priority given to link is with better performance).
Set the linker using CMAKE_*_LINKER_FLAGS instead of {C/CXX}FLAGS.
There is no advantage in using the CFLAGS to set the linker, it has the
downside of triggering a full rebuild when changing the linker.
Tested building Blender and the bpy.so Python module.
Ref D13833
Reviewed by: sergey, brecht
Conceptually, this is the geometry that data is taken from,
not the target of an operation, so rename it from "Target"
to "Source". This was common user feedback and agreed
on in a recent sub-module meeting.
Before rB644e6c7a3e99ae1d43ed, `fill` was used in the error
cases, but now `fill_indices` is used, which doesn't work when
the span is empty (when only one output is used). The fix is just
to check for that case.
The search list only displayed the "Result" output socket in this
case, which is unexpected since dragging from an input gives the
operations in the list as well. Also use integer mode when
connecting to boolean sockets.
I noticed these when doing final cleanup on rBcfa53e0fbeed.
One use was removed in that commit, the others were unused
going further back a few years.
Differential Revision: https://developer.blender.org/D13834
`TreeElement` isn't a trivial type anymore, so `MEM_delete()` should be
called, which calls the destructor.
AFAICS this would cause a memory leak, since the contained `unique_ptr`
is allocated but not destructed correctly - but it's not using the
guarded allocator so woudn't be reported.
Smart pointers should be the default choice for C++ owning pointers,
since they let you manage memory using RAII.
Also moved type factory methods into static class functions.
Basically this removes any C <-> C++ glue code. C++ types are accessed
directly via the public C++ APIs.
Contains some related changes like, moving functions that were
previously declared in a now removed header to a different file, whose
header is the more appropriate place (and the source file as well).
But generally I tried to avoid other changes.
The switch to how normals are kept has led to tiny differences in
the normal output values on different platforms. Disabling the failing
tests while working on a solution to this problem.
Part of a5cb7c1e62 is reverted since it
created unknown pragma warning on windows.
Use a trick to do self-assigning.
Reviewed by Jacques Lucke in chat.
`BKE_layer_collection_sync` was missing a specific handling for one of
those pre-master collection cases,
NOTE: It is a bit unfortunate to have to do 'do-version' code in BKE...
At some point might look into moving this into actual `do_version` file,
but this is not fully trivial not critical improvement for now.
Caused by rBa5c59fb90ef9.
Since Group Input and Output sockets happen to be of type `SOCK_CUSTOM`
[and since rBa5c59fb90ef9 custom py defined sockets are too :)] a check
introduced in rB513066e8ad6f that prevents connections for `SOCK_CUSTOM`
triggered.
Now refine the check, so it specifically looks for NODE_GROUP_INPUT /
NODE_GROUP_OUTPUT, too (this keeps the intention intact to not connect
group inputs to group outputs and vice versa, but allows custom py
defined sockets to connect again) and put it in new utility function.
Maniphest Tasks: T94827
Differential Revision: https://developer.blender.org/D13817
Blender.xcodeproj User-supplied CFBundleIdentifier value
'org.blenderfoundation.blender' in the Info.plist must be the same as
the PRODUCT_BUNDLE_IDENTIFIER build setting value ''.
Reviewed By: #platform_macos, brecht
Differential Revision: https://developer.blender.org/D13826
Didn't remove the key-value pair since old Xcode behavior is not
known.
warning: LSMinimumSystemVersion of '10.9.0' is less than the value of
MACOSX_DEPLOYMENT_TARGET '10.13' - setting to '10.13'. (in target
'blender' from project 'Blender')
Reviewed By: #platform_macos, brecht
Differential Revision: https://developer.blender.org/D13831
Fix assignment warning
source/blender/blenlib/tests/BLI_any_test.cc:56:5: warning: explicitly
assigning value of variable of type 'blender::Any<void, 8, 8>'
to itself [-Wself-assign-overloaded]
c = c;
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D13835
2-point-curves are treated separately from 3plus-point-curves (assume a
lot of the twisting reduction can be skipped, so there is a dedicated
function for single segment curves).
And while using the 3plus-point-curves function [`make_bevel_list_3D`]
would actually work in this case, the dedicated function
`make_bevel_list_segment_3D` would only consider the tilt of the second
point and would just copy over the quat to the first point as well. Dont
see a reason for this, now consider the first point's tilt as well.
Maniphest Tasks: T94837
Differential Revision: https://developer.blender.org/D13813
Can give considerably faster linking, especially on system with many
cores.
The mold linker recently reached 1.0, see:
https://github.com/rui314/mold
The current stable release of GCC can't use this linker via
-fuse-ld=mold, so this patch uses the "-B" argument to add a binary
directory containing an alternate "ld" command that points to
"mold" (which is part of the default mold installation).
Some timing tests for linking full builds for AMD TR 3970X:
- BFD: 20.78 seconds.
- LLD: 12.16 seconds.
- GOLD: 7.21 seconds.
- MOLD: 2.53 seconds.
Ref D13807
Reviewed by: sergey, brecht
The mask is only used if it's not zero. Adding the normal mask made
it not zero, but it didn't include anything else, so all custom data
layers except normals were removed. The fix is to only add normals
to the mask when it should be used.
As described in T91186, this commit moves mesh vertex normals into a
contiguous array of float vectors in a custom data layer, how face
normals are currently stored.
The main interface is documented in `BKE_mesh.h`. Vertex and face
normals are now calculated on-demand and cached, retrieved with an
"ensure" function. Since the logical state of a mesh is now "has
normals when necessary", they can be retrieved from a `const` mesh.
The goal is to use on-demand calculation for all derived data, but
leave room for eager calculation for performance purposes (modifier
evaluation is threaded, but viewport data generation is not).
**Benefits**
This moves us closer to a SoA approach rather than the current AoS
paradigm. Accessing a contiguous `float3` is much more efficient than
retrieving data from a larger struct. The memory requirements for
accessing only normals or vertex locations are smaller, and at the
cost of more memory usage for just normals, they now don't have to
be converted between float and short, which also simplifies code
In the future, the remaining items can be removed from `MVert`,
leaving only `float3`, which has similar benefits (see T93602).
Removing the combination of derived and original data makes it
conceptually simpler to only calculate normals when necessary.
This is especially important now that we have more opportunities
for temporary meshes in geometry nodes.
**Performance**
In addition to the theoretical future performance improvements by
making `MVert == float3`, I've done some basic performance testing
on this patch directly. The data is fairly rough, but it gives an idea
about where things stand generally.
- Mesh line primitive 4m Verts: 1.16x faster (36 -> 31 ms),
showing that accessing just `MVert` is now more efficient.
- Spring Splash Screen: 1.03-1.06 -> 1.06-1.11 FPS, a very slight
change that at least shows there is no regression.
- Sprite Fright Snail Smoosh: 3.30-3.40 -> 3.42-3.50 FPS, a small
but observable speedup.
- Set Position Node with Scaled Normal: 1.36x faster (53 -> 39 ms),
shows that using normals in geometry nodes is faster.
- Normal Calculation 1.6m Vert Cube: 1.19x faster (25 -> 21 ms),
shows that calculating normals is slightly faster now.
- File Size of 1.6m Vert Cube: 1.03x smaller (214.7 -> 208.4 MB),
Normals are not saved in files, which can help with large meshes.
As for memory usage, it may be slightly more in some cases, but
I didn't observe any difference in the production files I tested.
**Tests**
Some modifiers and cycles test results need to be updated with this
commit, for two reasons:
- The subdivision surface modifier is not responsible for calculating
normals anymore. In master, the modifier creates different normals
than the result of the `Mesh` normal calculation, so this is a bug
fix.
- There are small differences in the results of some modifiers that
use normals because they are not converted to and from `short`
anymore.
**Future improvements**
- Remove `ModifierTypeInfo::dependsOnNormals`. Code in each modifier
already retrieves normals if they are needed anyway.
- Copy normals as part of a better CoW system for attributes.
- Make more areas use lazy instead of eager normal calculation.
- Remove `BKE_mesh_normals_tag_dirty` in more places since that is
now the default state of a new mesh.
- Possibly apply a similar change to derived face corner normals.
Differential Revision: https://developer.blender.org/D12770
Some of the message-bus macros are not safe to use in C++. This has come
up before, but no good solution was found. Now @LazyDodo, @HooglyBoogly
and I concluded this is the best duct tape "solution" for the moment.
The message-bus API should address this.
Today many users seem to think the output from
this node is a single curve with multiple splines.
This patch renames the geometry output socket
from "Curves" to "Curve Instances" to avoid confusion.
Differential Revision: https://developer.blender.org/D13693
We want to refactor quite some of the Outliner code using C++, this is a
logical step to help the transition to a new architecture.
Includes plenty of fixes to make this compile without warnings, trying
not to change logic. The usual stuff (casts from `void *`, designated
initializers, compound literals, etc.).
There were a couple of function name collisions which were caused
by sharing code with the mask modifier. I just removed the dependence
on the mask modifier now. The code that I duplicated for that purpose
is only in a legacy node, so it can be expected to be removed soonish.
And change install_deps.sh to build shared (instead of static) FFMPEG
libraries, for consistency with other library dependencies and to simplify
the logic. This may require users of install_deps.sh to rebuild FFMPEG.
This is the last step that lets us get rid of LIBPATH variables and
link_directories() entirely, as recommended by the CMake docs.
Some fixes were needed in the find FFMPEG module to make it actually work,
this code was unused up to now.
Followup to D8855.
Differential Revision: https://developer.blender.org/D9177
The fundamental limitation is that we can only have one instance
("dupli") generator at a time. Because the mesh output of a curve
object is output as an instances, the geometry set instances existed,
replacing the object as font instances. The "fix" is to reverse the
order. The behavior won't be perfect still, but at least the old
behavior will be preserved, which is really what matters for a
feature like this.
One way to take this change further would be completely disabling
regular geometry evaluation while this option is active. However,
it doesn't seem like that would actually improve the state of the code.
Differential Revision: https://developer.blender.org/D13768
When drawing windows on monitors that differ in DPI, we can sometimes
have UI elements draw at an incorrect scale. This patch just ensures
that `wm_window_make_drawable` always updates DPI.
See D10483 for more details.
Differential Revision: https://developer.blender.org/D10483
Reviewed by Brecht Van Lommel
Allow area Split to be initiated in any area and give better feedback
when not allowed.
See D13599 for more details and usage examples.
Differential Revision: https://developer.blender.org/D13599
Reviewed by Campbell Barton
And change install_deps.sh to build shared (instead of static) FFMPEG
libraries, for consistency with other library dependencies and to simplify
the logic. This may require users of install_deps.sh to rebuild FFMPEG.
This is the last step that lets us get rid of LIBPATH variables and
link_directories() entirely, as recommended by the CMake docs.
Some fixes were needed in the find FFMPEG module to make it actually work,
this code was unused up to now.
Followup to D8855.
Differential Revision: https://developer.blender.org/D9177
This is my attempt of adding defaults for the space clip editor struct
(in line with https://developer.blender.org/T80164).
It adds the default allocation for `SpaceClip` and
`node_composite_movieclip.cc`. This also solves the error below (for
C++ files using the DNA_default_alloc), which was put forward by
Sergey Sharybin.
Differential Revision: https://developer.blender.org/D13367
Reviewed by: Julian Eisel
While theorically fairly generic, current code is only enabled for
bledfile and liboverride views, and only used to display messages from
library IDs.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D13766
SVG files contained specific detailed pathnames on developers'
computers. These included full local user profile and path and should
not be in the release.
This patches corrects those lines. It also removes unused gradients from
the private icons SVG.
Differential Revision: https://developer.blender.org/D13344
Reviewed by: Yevgeny Makarov, Julian Eisel
This adds wrapper classes that make it easier to use GPU objects in C++.
####Motivations:####
- Easier handling of GPU objects.
- EEVEE rewrite already makes use of similar wrappers.
- There is the ongoing effort to use more C++ in the codebase
and lans to port more engines to it.
- The shader code refactor will make use of many UBOs with shared
struct declaration. This helps managing them.
- Safer handling of `TextureFromPool` which can't be bound as normal
texture (only texture ref) and can be better tracked in the future.
####Considerations:####
- I chose the `blender::draw` namespace because `blender::gpu` already has private classes (i.e: `gpu::Texture`).
- Theses are wrappers that manage a GPU object internally. They might be confused with actual `Texture`. However, the name `TextureWrapper` is a bit too much verbose in my opinion. I'm open to suggestion about better name.
Reviewed By: jbakker
Differential Revision: http://developer.blender.org/D13805
This patch implements the vector types (i.e:`float2`) by making heavy
usage of templating. All vector functions are now outside of the vector
classes (inside the `blender::math` namespace) and are not vector size
dependent for the most part.
In the ongoing effort to make shaders less GL centric, we are aiming
to share more code between GLSL and C++ to avoid code duplication.
####Motivations:
- We are aiming to share UBO and SSBO structures between GLSL and C++.
This means we will use many of the existing vector types and others
we currently don't have (uintX, intX). All these variations were
asking for many more code duplication.
- Deduplicate existing code which is duplicated for each vector size.
- We also want to share small functions. Which means that vector
functions should be static and not in the class namespace.
- Reduce friction to use these types in new projects due to their
incompleteness.
- The current state of the `BLI_(float|double|mpq)(2|3|4).hh` is a
bit of a let down. Most clases are incomplete, out of sync with each
others with different codestyles, and some functions that should be
static are not (i.e: `float3::reflect()`).
####Upsides:
- Still support `.x, .y, .z, .w` for readability.
- Compact, readable and easilly extendable.
- All of the vector functions are available for all the vectors types
and can be restricted to certain types. Also template specialization
let us define exception for special class (like mpq).
- With optimization ON, the compiler unroll the loops and performance
is the same.
####Downsides:
- Might impact debugability. Though I would arge that the bugs are
rarelly caused by the vector class itself (since the operations are
quite trivial) but by the type conversions.
- Might impact compile time. I did not saw a significant impact since
the usage is not really widespread.
- Functions needs to be rewritten to support arbitrary vector length.
For instance, one can't call `len_squared_v3v3` in
`math::length_squared()` and call it a day.
- Type cast does not work with the template version of the `math::`
vector functions. Meaning you need to manually cast `float *` and
`(float *)[3]` to `float3` for the function calls.
i.e: `math::distance_squared(float3(nearest.co), positions[i]);`
- Some parts might loose in readability:
`float3::dot(v1.normalized(), v2.normalized())`
becoming
`math::dot(math::normalize(v1), math::normalize(v2))`
But I propose, when appropriate, to use
`using namespace blender::math;` on function local or file scope to
increase readability.
`dot(normalize(v1), normalize(v2))`
####Consideration:
- Include back `.length()` method. It is quite handy and is more C++
oriented.
- I considered the GLM library as a candidate for replacement. It felt
like too much for what we need and would be difficult to extend / modify
to our needs.
- I used Macros to reduce code in operators declaration and potential
copy paste bugs. This could reduce debugability and could be reverted.
- This touches `delaunay_2d.cc` and the intersection code. I would like
to know @howardt opinion on the matter.
- The `noexcept` on the copy constructor of `mpq(2|3)` is being removed.
But according to @JacquesLucke it is not a real problem for now.
I would like to give a huge thanks to @JacquesLucke who helped during this
and pushed me to reduce the duplication further.
Reviewed By: brecht, sergey, JacquesLucke
Differential Revision: https://developer.blender.org/D13791
This patch implements the vector types (i.e:`float2`) by making heavy
usage of templating. All vector functions are now outside of the vector
classes (inside the `blender::math` namespace) and are not vector size
dependent for the most part.
In the ongoing effort to make shaders less GL centric, we are aiming
to share more code between GLSL and C++ to avoid code duplication.
####Motivations:
- We are aiming to share UBO and SSBO structures between GLSL and C++.
This means we will use many of the existing vector types and others
we currently don't have (uintX, intX). All these variations were
asking for many more code duplication.
- Deduplicate existing code which is duplicated for each vector size.
- We also want to share small functions. Which means that vector
functions should be static and not in the class namespace.
- Reduce friction to use these types in new projects due to their
incompleteness.
- The current state of the `BLI_(float|double|mpq)(2|3|4).hh` is a
bit of a let down. Most clases are incomplete, out of sync with each
others with different codestyles, and some functions that should be
static are not (i.e: `float3::reflect()`).
####Upsides:
- Still support `.x, .y, .z, .w` for readability.
- Compact, readable and easilly extendable.
- All of the vector functions are available for all the vectors types
and can be restricted to certain types. Also template specialization
let us define exception for special class (like mpq).
- With optimization ON, the compiler unroll the loops and performance
is the same.
####Downsides:
- Might impact debugability. Though I would arge that the bugs are
rarelly caused by the vector class itself (since the operations are
quite trivial) but by the type conversions.
- Might impact compile time. I did not saw a significant impact since
the usage is not really widespread.
- Functions needs to be rewritten to support arbitrary vector length.
For instance, one can't call `len_squared_v3v3` in
`math::length_squared()` and call it a day.
- Type cast does not work with the template version of the `math::`
vector functions. Meaning you need to manually cast `float *` and
`(float *)[3]` to `float3` for the function calls.
i.e: `math::distance_squared(float3(nearest.co), positions[i]);`
- Some parts might loose in readability:
`float3::dot(v1.normalized(), v2.normalized())`
becoming
`math::dot(math::normalize(v1), math::normalize(v2))`
But I propose, when appropriate, to use
`using namespace blender::math;` on function local or file scope to
increase readability.
`dot(normalize(v1), normalize(v2))`
####Consideration:
- Include back `.length()` method. It is quite handy and is more C++
oriented.
- I considered the GLM library as a candidate for replacement. It felt
like too much for what we need and would be difficult to extend / modify
to our needs.
- I used Macros to reduce code in operators declaration and potential
copy paste bugs. This could reduce debugability and could be reverted.
- This touches `delaunay_2d.cc` and the intersection code. I would like
to know @howardt opinion on the matter.
- The `noexcept` on the copy constructor of `mpq(2|3)` is being removed.
But according to @JacquesLucke it is not a real problem for now.
I would like to give a huge thanks to @JacquesLucke who helped during this
and pushed me to reduce the duplication further.
Reviewed By: brecht, sergey, JacquesLucke
Differential Revision: https://developer.blender.org/D13791
Fixes issue T94603
It adds a new compositor node called Scene Time which is already present as a geo node, having the same basic nodes available in all node trees is a nice thing to have.
Renames "Time" node to "Time Curve", this is done to avoid confusion between the Time node and the Scene Time node.
Reviewed By: jbakker
Maniphest Tasks: T94603
Differential Revision: https://developer.blender.org/D13762
This patch implements the vector types (i.e:float2) by making heavy
usage of templating. All vector functions are now outside of the vector
classes (inside the blender::math namespace) and are not vector size
dependent for the most part.
In the ongoing effort to make shaders less GL centric, we are aiming
to share more code between GLSL and C++ to avoid code duplication.
Motivations:
- We are aiming to share UBO and SSBO structures between GLSL and C++.
This means we will use many of the existing vector types and others we
currently don't have (uintX, intX). All these variations were asking
for many more code duplication.
- Deduplicate existing code which is duplicated for each vector size.
- We also want to share small functions. Which means that vector functions
should be static and not in the class namespace.
- Reduce friction to use these types in new projects due to their
incompleteness.
- The current state of the BLI_(float|double|mpq)(2|3|4).hh is a bit of a
let down. Most clases are incomplete, out of sync with each others with
different codestyles, and some functions that should be static are not
(i.e: float3::reflect()).
Upsides:
- Still support .x, .y, .z, .w for readability.
- Compact, readable and easilly extendable.
- All of the vector functions are available for all the vectors types and
can be restricted to certain types. Also template specialization let us
define exception for special class (like mpq).
- With optimization ON, the compiler unroll the loops and performance is
the same.
Downsides:
- Might impact debugability. Though I would arge that the bugs are rarelly
caused by the vector class itself (since the operations are quite trivial)
but by the type conversions.
- Might impact compile time. I did not saw a significant impact since the
usage is not really widespread.
- Functions needs to be rewritten to support arbitrary vector length. For
instance, one can't call len_squared_v3v3 in math::length_squared() and
call it a day.
- Type cast does not work with the template version of the math:: vector
functions. Meaning you need to manually cast float * and (float *)[3] to
float3 for the function calls.
i.e: math::distance_squared(float3(nearest.co), positions[i]);
- Some parts might loose in readability:
float3::dot(v1.normalized(), v2.normalized())
becoming
math::dot(math::normalize(v1), math::normalize(v2))
But I propose, when appropriate, to use
using namespace blender::math; on function local or file scope to
increase readability. dot(normalize(v1), normalize(v2))
Consideration:
- Include back .length() method. It is quite handy and is more C++
oriented.
- I considered the GLM library as a candidate for replacement.
It felt like too much for what we need and would be difficult to
extend / modify to our needs.
- I used Macros to reduce code in operators declaration and potential
copy paste bugs. This could reduce debugability and could be reverted.
- This touches delaunay_2d.cc and the intersection code. I would like to
know @Howard Trickey (howardt) opinion on the matter.
- The noexcept on the copy constructor of mpq(2|3) is being removed.
But according to @Jacques Lucke (JacquesLucke) it is not a real problem
for now.
I would like to give a huge thanks to @Jacques Lucke (JacquesLucke) who
helped during this and pushed me to reduce the duplication further.
Reviewed By: brecht, sergey, JacquesLucke
Differential Revision: http://developer.blender.org/D13791
The issue was caused by rBd09b1d2759861aa012ab2e7e4ce2ffa2.
Since this commit, the image users in gpu materials were updated
during depsgraph evaluation as well. However, there was a race
condition when one thread is deleting gpu materials in `BKE_material_eval`
while another thread is updating the image users at the same time.
The solution is to make sure that deleting gpu materials is done before
iterating over all gpu materials, by adding a new depsgraph relation.
The main issue was the use of `G_MAIN` during file load.
This patch refactors the code so that iterating over `G_MAIN`
is not necessary anymore. See D13800 for more details.
Differential Revision: https://developer.blender.org/D13800
The issue was caused by Cycles display driver not being able to restore
window's OpenGL context after disposing Cycles-side OpenGL context.
This is due to the window OpenGL re-activation needing to access window
manager which gets cleared out form global main during file reading.
Defer clearing window manager from the global main to until after all
screens are "exited". This allows Cycles to properly stop rendering,
dispose its OpenGL context, and restore window's drawable context.
It is unclear why it was required to clear window manager list early
on. Guess is that it comes from an original code in a1c8543f2a where
there was an early return which then got replaced with an actual logic
without changing the order of de-initialization and window manager list
clear.
Differential Revision: https://developer.blender.org/D13799
The direct cause of the bug in question was passing in the raw memory
buffer to sscanf. It should be called with a null-terminated buffer;
which isn't guaranteed when blindly trusting the file data.
When attempting to fuzz this code path, a variety of other crashes were
discovered and fixed.
Differential Revision: https://developer.blender.org/D11952
Remove code that very slightly darkened line on bottom of timeline, when
backdrop is enabled. Purpose of the code wasn't dodumented, and 2.79
doesn't seem to produce this darkened line.
Rename drawing functions to appropriate names.
Add maximum string length argument to UI_fontstyle_draw to reduce usage
of BLF_DRAW_STR_DUMMY_MAX. Reorders arguments to UI_fontstyle_draw_ex
See D13794 for more details.
Differential Revision: https://developer.blender.org/D13794
Reviewed by Campbell Barton
Reduction of the number of uses of the define BLF_DRAW_STR_DUMMY_MAX
by using actual sizes of static character arrays.
See D13793 for more details.
Differential Revision: https://developer.blender.org/D13793
Reviewed by Campbell Barton
Blender's compositor code already makes extensive use of
namespace which makes it very simple to enable unity build.
There was one duplicated function that has since to be moved
to a common header.
I saw roughly a 3x speedup of bf_compositor using ninja on
linux using i5 8250u (1:34 down to 0:34).
Reviewed By: LazyDodo
Differential Revision: https://developer.blender.org/D13792
With this change, compilation saw a 2.4x improvement.
This can be combined with unity build to give an overall 4x improvement
Depends on D13797
Reviewed By: LazyDodo
Differential Revision: https://developer.blender.org/D13798
Removal of unused tmp member of GHOST_TEventImeData. Not used now,
nor was it used by the commit that added it to begin with.
Differential Revision: https://developer.blender.org/D11799
Reviewed by Ray Molenkamp
our UNUSED macro is essentially a no-op for MSVC, which lead to
the situation where this well meant macro was emitting the
following warning:
C4189: 'UNUSED_i': local variable is initialized but not referenced
However since we have been on c++17 for a while now the UNUSED
macro can be replaced with the standard [[maybe_unused]] attribute
in cpp files.
This changes cleans up the use of the UNUSED macro in the
bf_nodes_geometry project.
Differential Revision: https://developer.blender.org/D12915
Reviewed by: JacquesLucke, Severin, Sergey, HooglyBoogly
Since CMake 3.16, CMake has native precompiled header (PCH) support.
This change swaps Blender's own PCH implementation with the native implementation.
Previously, PCH was only enabled on Windows however,
this new implementation works on all platforms.
For more information see https://cmake.org/cmake/help/latest/command/target_precompile_headers.html
On my system, Linux with ninja running on an i5 8250U
I saw a 60% reduction in compile times for `bf_freestyle` + linking time.
Reviewed By: LazyDodo, brecht
Differential Revision: https://developer.blender.org/D13797
The problem was the points were selected in edit mode and then sampled. Now, in draw mode, the points are always unselected to avoid this effect in the auto merge process.
The new triangulation mode for quads is the opposite of the current default
shortest diagonal mode. It is optimal for cloth simulations using quad meshes.
Differential Revision: http://developer.blender.org/D13777
Issue introduced in rB1d49293b80446b89b5b12fa0eeefaf14e5051e48
`drw_manager_init` must be called after `drw_context_state_init` as
`DST.draw_ctx.sh_cfg` (indicating when the view is clipped) must be set
first.
Differential Revision: https://developer.blender.org/D13795
After disconnecting hair on an object, if you then hide the particle system, and try connecting the hair again, the operator is cancelled due to `remap_hair_emitter` returning `false` because `target_psmd->mesh_final` is NULL, but `connect_hair` will still strip the `PSYS_GLOBAL_HAIR` flag, which will cause the hair in the hidden particle system to be positioned incorrectly. The correct behavior is to strip the flag only if `remap_hair_emitter` succeeds.
Differential Revision: https://developer.blender.org/D13703
When the 'threshold' is not used in the type we are comparing, just hide
it. This was obvious for some types (e.g. Materials), but maybe not so
on others (e.g. Polygon Sides) and potentionally confusing.
Reported by @hitrpr in chat.
Differential Revision: https://developer.blender.org/D13760
This is an update to the correct OCIO role.
It changes `SceneReference` to `scene_linear`
See https://opencolorio.readthedocs.io/en/latest/guides/authoring/overview.html#config-roles
> - reference - the color space against which the other color spaces are defined
>NOTE: The reference role has sometimes been misinterpreted as being the space in which “reference art” is stored in.
>
> - scene_linear - the scene-referred linear-to-light color space, often the same as the reference space
The current OCIO UX working group doc says:
>reference: This role has had multiple interpreted meanings over the years and is a common point of confusion. It is kept in OCIO for backwards compatibility, but the recommendation is that it is not used by apps.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11398
This puts all static functions in composite node files into a new
namespace. This allows using unity build which can improve
compile times significantly.
This is a follow up on rB1df8abff257030ba79bc23dc321f35494f4d91c5
but for compositor nodes.
The namespace name is derived from the file name.
That makes it possible to write some tooling that checks the names later on.
The filename extension (`cc`) is added to the namespace name as well.
his also possibly simplifies tooling but also makes it more obvious that this namespace is specific to a file.
Reviewed By: JacquesLucke, HooglyBoogly, jbakker
Differential Revision: https://developer.blender.org/D13466
If timeline contains scene strip outside of edited meta strip, this will
cause crash. This is because prefetchin ignored meta strips being edited
when rendering, but did check for scene strips only inside edited meta
strip.
Change active seqbase pointer when entering meta strip. This makes it
possible to prefetch only content that is being presented to user.
rBeed45d2a239a introduced a GPU backend for OpenSubDiv which lets us do
the subdivision at render time. However, some tools might still need to
have the subdivision data available on the CPU side. For this a
subdivision mesh wrapper was also introduced, and is computed whenever a
CPU side mesh is needed. The subdivision settings for this wrapper are
stored during modifier evaluation if GPU subdivision can be done.
The performance regression is due to the fact that although the
subdivision mesh was already computed on the CPU, and no subdivision
wrapper is generated, some checks for creating subdivision data in
`BKE_mesh_wrapper_ensure_subdivision` where still run, one of which is
very expensive.
To fix this we first check the runtime settings of the mesh to see if
subdivision is needed at all.
This commit adds topology information from mesh data structs to the
spreadsheet when the debug value `4001` is set. Eventually we could
expose these. For now it can be a useful tool for developers when
working on mesh algorithms.
Differential Revision: https://developer.blender.org/D13735
The value of this flag was only retrieved in `nodeGetActiveID`, which
wasn't used anywhere. Other than that, the `NODE_ACTIVE_ID` and
related functions seem to come from the Blender internal renderer.
Differential Revision: https://developer.blender.org/D13770
This commit moves the normal field input to `BKE_geometry_set.hh`
from the node file so that normals can be used as an implicit input to
other nodes.
Differential Revision: https://developer.blender.org/D13779
Slight change to our processing of Ctrl-C, Ctrl-V, and Ctrl-X so that
they will not be triggered if Alt is also pressed. This allows entry
of AltGr-C, -V, -X when using International keyboard layouts.
See D13781 for more details
Differential Revision: https://developer.blender.org/D13781
Reviewed by Brecht Van Lommel
Treat "/" as a key that should be evaluated by the Win IME system when
the input language is Chinese. This fixes a duplication of the input
character and results in the expected output of a Chinese wide comma.
See D13771 for more details.
Differential Revision: https://developer.blender.org/D13771
Reviewed by Brecht Van Lommel
Consider temporary directory to be variant part of session configuration
which gets communicated to the tile manager on render reset.
This allows to be able to render with one temp directory, change the
directory, render again and have proper render result even with enabled
persistent data.
For the ease of access to the temp directory expose it via the render
engine API (engine.temp_directory).
Differential Revision: https://developer.blender.org/D13790
The issue was caused by the recent changes in the way how the
render result is drawn: the display driver now could hold an
OpenGL resources. Those resources are not shared across contexts
so whenever OpenGL context is destroyed those resources are to
be destroyed as well (and not attempted to be re-used for a next
render).
Do such destruction and entire driver re-creation since it does
simplifies things from API usage point of view without causing
measurable slowdown.
Steps to reproduce the issue:
- Set the render resolution to 2x of Full HD
- Enable persistent data
- Render (F12)
- Render again
Observe OpenGL state being corrupted. Easy to see in debug mode
where IMM abstraction level reports issues about the buffer size
not being the proper size. This was caused by the display driver
trying to use VAO from the previous OpenGL context.
Differential Revision: https://developer.blender.org/D13789
The core issue is that flushing dependencies are created from an object
to a node tree when it contains e.g. a Texture Coordinate node.
That is an issue because the evaluation of the node tree itself does not
depend on the object (node tree evaluation is essentially a no-op).
Only other systems that parse and evaluate the node tree in a specific
context actually depend on e.g. the position of the referenced object.
It can even be the case that the node tree depends on objects that
the actual evaluator (geometry nodes modifier/material) does not depend
on, because a node is not connected to the output.
Geometry nodes makes the distinction between dependencies to the
node tree and to the evaluator already. Shader nodes do not.
Therefore, shader nodes need a flushing relation from node groups
to their parent node groups.
This brings back some unnecessary updates from rB7e712b2d6a0d
(e.g. when creating a node group from nodes that are not connected
to the output). This is a bit unfortunate, but refactoring how
dependencies work with shader nodes is a out of scope for this fix.
Since rBf9ccd26b037d, calling `data.path_resolve()` on custom properties
with `None` value do not cause a `ValueError` exception any more. This
is now taken into account in the keying sets targeting custom
properties.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D13787
rBd6891d9bee2b introduced a way to apply a single constraint from the
constraint stack. For this we want to work in the evaluated domain, in
particular the constraint target should be evaluated (the shrinkwrap
constraint needs to have access to the target's evaluated mesh).
Thx a lot to @sergey for handholding here!
Maniphest Tasks: T94600
Differential Revision: https://developer.blender.org/D13765
This moves the clear paths button ("X") to the same line of "Update All Paths",
and make it visible at all times.
1. The clear button affects all objects (by default). However the
Calculate/Update Paths only works on the selected objects/objects.
Better to not have them both on the same line.
2. The operator to clear object and pose paths can run even if the active
object/bone has no motion path. However the UI was not showing the button in
those cases.
Before:
{F12757500, size=full}
After:
{F12757502, size=full}
Differential Revision: https://developer.blender.org/D13609
Compositor node to convert between color spaces.
Conversion is skipped when converting between the same color spaces or to or from data spaces.
Implementation done for tiled and full frame compositor.
Reviewed By: Blendify, jbakker
Differential Revision: https://developer.blender.org/D12481
Switched populating GHOST_WintabInfoWin32 vector from resizing and
assigning to reserving and pushing.
Removed unnecessary state tracking for multiple button presses in a
single packet.
Paired initialization with definition, and added default initialization
for GHOST_WintabInfoWin32.
Currently the node link ui template only works with a few socket types.
This commit addes support for the rest of the socket type declarations.
As pointed out in D13776 currently after recent refactors
Shader nodes no longer display in the menu.
In the future more socket types will be used in the shader nodes
and makes the UI template work better for other node trees.
Differential Revision: https://developer.blender.org/D13778
Weightpaint gradient tool panel showed in other modes (and as a separate
panel).
Fix for fix, see
- rBf8a0e102cf5e
- rBe549d6c1bd2d
So now, check mode again and restrict to topbar (prevents an additional
panel since this is already included in the brush settings).
ref rB0837926740b3 in sculpt-dev branch, so thx @joeedh as well!
Maniphest Tasks: T94243
Differential Revision: https://developer.blender.org/D13630
Currently, most node buttons are defined in `drawnode.cc` however,
this is inconvenient because it requires editing many files when adding new nodes.
The goal is to minimize the number of files needed to add or update a node.
This commit moves most of the node layout functions for shader nodes into their respected
source/blender/nodes/shader/nodes file.
In the future, these functions will be simplified to node_layout.
Some nodes were left in `drawnode.cc` as this would require duplicating code
while this is likely fine it is best to leave that to a seperate commit.
Some software or processing tools (videogrammetry in this case) may
export malformed files with velocity data even when the frame is empty
for some reason. We need to explicity compare the data size with the
vertex size, and refuse to load the attribute if there is a data size
mismatch.
The dangling pointer caused errors further down the line.
The solution is to simply delete an internal link when one
of the corresponding sockets is removed (just like normal
links are removed as well).
We can't include `BLI_utildefines.h` in `RNA_types.h` since Cycles includes
that, but duplicates some of the util defines. So you'd have duplicated
definitions.
Fixes a bug introduced in rB5dedb39d447b. `mesh_original` is not set if the
mesh has no generative modifiers, in which case we can use `mesh_final`, which
would seem to be consistent with the rest of the particle code. An alternative
approach would be to make sure that `mesh_original` is always set in
`deformVerts`.
Differential Revision: https://developer.blender.org/D13754
Must take into account SD_OBJECT_TRANSFORM_APPLIED to determine if the normal
was already in world space.
Differential Revision: https://developer.blender.org/D13639
The root of the issue is caused by Cycles ignoring OpenGL limitation on
the maximum resolution of textures: Cycles was allocating texture of the
final render resolution. It was exceeding limitation on certain GPUs and
driver.
The idea is simple: use multiple textures for the display, each of which
will fit into OpenGL limitations.
There is some code which allows the display driver to know when to start
the new tile. Also added some code to allow force graphics interop to be
re-created. The latter one ended up not used in the final version of the
patch, but it might be helpful for other drivers implementation.
The tile size is limited to 8K now as it is the safest size for textures
on many GPUs and OpenGL drivers.
This is an updated fix with a workaround for freezing with the NVIDIA
driver on Linux.
Differential Revision: https://developer.blender.org/D13385
This patch fixes a couple of new Metal kernel compilation errors: 1) a kernel parameter count overflow, and 2) missing address space qualifiers.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D13763
Simplify signature of `BKE_lib_override_library_resync` and make it a
shallow wrapper around new internal `lib_override_library_resync` that
can then be easily extended for other internal needs.
Not functional changes expected here.
`DEG_OBJECT_ITER_FOR_RENDER_ENGINE_BEGIN` creates temporary objects that
correspond to duplicates or instances.
These temporary objects can share same pointers with the original object
as in the case of Bounding Box.
Bound Box of temporary objects is marked dirty in
`BKE_object_replace_data_on_shallow_copy` since `ob->data` is different.
This causes the original Bounding Box, calculated for the evaluated
geometry, to be lost.
The solution in this commit is to change the boundbox reference of the
temporary objects, so the boundbox of the non-temporary object (with
the data curve) is not marked dirty.
Differential Revision: https://developer.blender.org/D13581
It it rather an old experiment now which didn't pay off.
The initial idea was to have main and jobs threads on fast
nodes of TR2 processors. This didn't really work reliably
because in Blender we need to be able to create nested
threads without their affinity set. This is not how some of
OS are creating nested threads, and we don't always have
access to child threads to reset their affinity.
So overall complexity of the initial idea implementation
became too much compared to the performance gain.
Request from studio, to help identify quickly libs that need update.
NOTE: Currently only outputing INFO log in console, display of this info
in the outliner will come in a separate commit.
No need for it now since all the threading queries and
scheduling is done via TBB.
Should be no functional changes as all the removed code
is supposed to be unused.
Query TBB for the maximum allowed concurrency, which is free from a bug
in own concurrency detection code. One thing to keep in mind is that now
Cycles is limited by the number of threads in the TBB areana from which
Session is created. This isn't a problem for Blender since we do not limit
arena on Blender side. Could be something to watch out for in other Cycles
integrations.
Differential Revision: https://developer.blender.org/D13658
Add a data boundary check in the flipping code.
This code now also communicates the number of mipmap levels
it processed with an intent to avoid GPU texture from using
more levels than there are in the DDS data.
Differential Revision: https://developer.blender.org/D13755
This was missing from rB3e92b4ed2408eacd126c0.
Before only the Separate Geometry node was fixed, because that
node was used in the file from the bug report. The same issue
existed in the Delete Geometry node as well though.
Regression in 7972785d7b that caused
Python callback arguments to be de-referenced twice - potentially
accessing freed memory. Making a new-file with a circle-select
tool active triggered this (for example).
Now arguments aren't de-referenced when Blender it's self has already
removed the callback handle.
Fix IMB_flip[xy] to handle cases where integer overflow might occur when
given sufficiently large image dimensions.
All of these fixes were of a similar class where the intermediate
sub-expression would overflow silently. Widen the types as necessary.
Differential Revision: https://developer.blender.org/D13744
Assert that only the file name component is passed in
since special handling for UDIM should only be applied to the file name.
Also remove an unnecessary NULL check on the filename argument.
For sake of consistencey with other node tree types, create its own cmake module.
This change helps keep `bf_nodes` focused on generic nodes files.
Texture nodes are end of life and hopefully for Blender 4.0 they can be removed.
It is not expected that these will see the updates that the other nodes are getting.
This change also helps isolate the end of life files, we may move some texture
specific node tree execution code out of `node_exec` and into a `node_texture_exec` files.
Differential Revision: https://developer.blender.org/D13743
Sculpt Smooth in Surface mode (as opposed to Laplacian) needs a cache
initialized on first time. In anchored stroke mode with spherical falloff
this was skipped though (because this starts of with no PBVH nodes and
an early return checks for this) and `first_time` was set to false before
cache initialization.
Now move the cache initalization to happen earlier (same as the cache
initialization for automasking).
Maniphest Tasks: T94635
Differential Revision: https://developer.blender.org/D13746
The `lines_adjacency` IBO build in the GPU subdivision case was missing
edges at the boundaries of open meshes. As it is used for the shadow
pass, the shadows were then not clipped properly.
This would also make X-Ray mode render differently in those cases.
To fix this, we can simply reuse the buffer finalization routine from the
non-subdivision case, as such edges are handled there.
This relation is intended to ensure that the properties of the IK
constraint are ready by the time the IK solver tree is built. This
however can cause spurious dependency cycles, because there is only
one init tree node for the whole armature, and the relation actually
implies dependency on all properties of the bone.
This patch reduces spurious dependencies by only creating the relation
if any properties of the IK constraint specifically are animated.
Differential Revision: https://developer.blender.org/D13714
When weight painting the bone overlay is extremely intrusive,
effectively requiring either extensive use of hiding individual
bones, or disabling the whole bone overlay between selections.
This addresses the issue by adding a bone opacity slider that
is used for the 'wireframe' armature drawing mode. It directly
controls the uniform opacity as a straightforward option.
Differential Revision: https://developer.blender.org/D11804
If multiple bones have a custom property with the same name,
depsgraph didn't distinguish between them, potentially leading
to spurious cycles.
This patch moves ID_PROPERTY operation nodes for bone custom
properties from the parameters component to individual bone
components, thus decoupling them.
Differential Revision: https://developer.blender.org/D13729
2022-01-06 16:43:18 +03:00
6837 changed files with 71763 additions and 155895 deletions
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
