Currently there is a panel that says "Active Keyframe" for numerically editing one keyframe's values, but in the code there is no concept of the "active keyframe."
This patch adds an "active keyframe index" to each FCurve, and displays it with a theme color for the active vertex (which didn't exist before) if the FCurve is active.
{F8536092 size=full}
The active keyframe is not currently set for select operations other than basic click-select, which mirrors the behavior in the 3D view.
Reviewed By: Severin, looch
Maniphest Tasks: T76595
Differential Revision: https://developer.blender.org/D7737
When sequencer was moved from kernel, the DEFINES based on audaspace
were not moved along.
That means users had no way of creating new audio strips since
BKE_sequencer_add_sound_strip was ifdef'out
The buttons hide when the search finishes based on whether they are in
the "panel header" group. These buttons were not protected with a new
group. This adds a new group for operator button calls, and also makes
it so a new group is always created after the header buttons.
- Density, interpolation and slicing options in Volume Object's
Viewport Display are now not aligned to each other as they are not
closely related.
- Changed the enum property for slicing ('Method') to a boolean
property 'Slice' and added a sub-panel for slicing options under
the 'Viewport Display' panel in Volume Object and Fluid for better
clarity.
- Renamed `axis_slice_method` to `use_slice` in the python API for
Volume Object and Fluid.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D9097
When extracting a mask, the new object is going to have the same mask on
the same vertices, so it can't be sculpted without clearing the mask
first. It makes more sense to delete the mask datalayer from the new
object.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D9070
This helps blending artifacts with dynamic simulation areas as the
damping increases when the vertex.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D9084
This adds a small gradient to the right side of the line to preview
which side of the mesh is going to be affected by the gesture operation.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D9106
rendering range
The Allow Negative Frames option, introduced in rB21a2350248fd, allows
for negative frames, but this should only apply for playback and
animations, the rendering range should still be clamped to MINFRAME /
MAXFRAME, because rendering does not allow for negative frames. Preview
range should not be affected afaict (I am not aware of operators that
allow for rendering this range).
Maniphest Tasks: T81380
Differential Revision: https://developer.blender.org/D9112
Move the collection exclude checkbox to be with the other restrict
buttons. This makes the button consistent with the other restrict
buttons, and it makes the visual hierarchy more clear with the contents
of a collection properly indented under the collection name, rather than
the collection icon.
Differential Revision: https://developer.blender.org/D8928
When the limit surface is disabled OpenSubdiv generates a set of linear
patches which are only C0 continuous, not C1. This makes it impossible to
evaluate derivatives at vertices which, in this mode, are by definition put
at boundaries of patches. Normals are calculated from those derivatives.
Solution is to disable normal calculation and let it be done downstream, as
for other modifiers. This limitation is also the reason that non feature
adaptive subdivision is badly suited for GPU evaluation.
Differential Revision: https://developer.blender.org/D9103
Because the active context is stored as a short in DNA it's better
to use short in the code surrounding it. Also adjusted a comment
that reflected an incorrect assumption.
During the refactor, this feature was removed by error.
When this option is enabled, only the frames with a keyframe are displayed in Draw mode. This is used when fill an animation to paint only in the frames with real drawing.
Fix T81429.
This was an intentional change in rBc75a665c442e as it maintains the
same behavior as the constraint with or without modifier.
But from the user's PoV, it is better to keep the old behavior.
This makes drawing and behavior more intuitive.
NanoVDB is a platform-independent sparse volume data structure that makes it possible to
use OpenVDB volumes on the GPU. This patch uses it for volume rendering in Cycles,
replacing the previous usage of dense 3D textures.
Since it has a big impact on memory usage and performance and changes the OpenVDB
branch used for the rest of Blender as well, this is not enabled by default yet, which will
happen only after 2.82 was branched off. To enable it, build both dependencies and Blender
itself with the "WITH_NANOVDB" CMake option.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8794
This has serious performance implications as the additional check makes
it O(N^2) when there are a lot of merged vertices.
The goal is to move the merging to the weld modifier where it would
be much easier to optimize.
Ref D8946
This commit to complex solidify swaps the side of the geometry which
is affected by the material offset when the normal flip option is
enabled. This matches simple solidify and is considered correct/useful.
Ref D8948
Apply the De Casteljau algorithm to split the Bèzier curve at the X
coordinate where the new key is inserted, and uses the result to update
both the newly inserted and surrounding handles.
For curves that use Auto keyframes this has been largely addressed by
the new algorithm from D2884. This commit extends this to non-auto
handles.
This code is heavily based on D3172 by Alexander Gavrilov (@angavrilov).
Manifest Task: https://developer.blender.org/T81353
Initialize CLOG in the blendfile-loading unit test superclass. Since
rB8683d4e88f2e CLOG is used by more areas in Blender, and without
initialisation it crashes.
Current libmv_modal_solver_test fails since rB3a7d62cd1f5e.
It appears that the issue is caused by the insertion of the new OFFSET_K4 parameter,
as, if camera intrinsics are not required to implement/use all of those deform
parameters, they absolutely have to keep order (values) matching those defined
in bundle.cc, otherwise `PackIntrinisicsIntoArray` and `UnpackIntrinsicsFromArray`
will mangle them around.
This reverts commit 66cd82a8d. This was based on a misunderstanding. We do want
to take into account transforms similar to other modifiers like booleans, to
support taking into account animated transforms, combining multiple meshes into
one volume, etc.
Declaring variables where they are initialized and used makes their
scope much more explicit and it aids readility since types are visible.
This commit doesn't touch the ID template code since there is an
active patch in that area.
This is first step of refactoring task T77580.
Next step will be breaking up files into smaller ones.
Reviewed By: sergey, brecht
Differential Revision: https://developer.blender.org/D8492
Remove word proxy from eSpaceSeq_Proxy_RenderSize members if proxy is
not used with that item. Otherwise this can be a bit confusing.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8861
If current frame is set to before start frame, with AV sync there is
delay when playback is started.
Tag scene with ID_RECALC_AUDIO_SEEK, so audio playback starts from
correct position.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8809
Functionality was hard to follow as the meaning of fullname
depended on basename being NULL or not.
- where_is_temp is now only responsible for finding the temp directory.
- Split out tempdir_session_create into it's own function
that wraps mkdtemp.
- Rename basename to tempdir, fullname to tempdir_session.
This choice was made when preferences were not read in background mode,
so the temp dir needed to be initialized with something.
See bc9848f7e6.
Now preferences are always read there is no reason to ignore this
particular preference in background mode.
Anyone wanting to do background renders that ignore their preferences
can run with factory startup.
These were printf's, disabled by a define that could be uncommented.
Use logging since this can be useful when investigating any issue
with paths not being found at the expected location.
Without this any problem finding app-templates, Python's installation,
icons ... etc are quite difficult to troubleshoot especially on systems
without access to system-call tracing.
To use this run:
blender --log "bke.appdir" --log-level 3
Initialize ImBuf (and color-management) after passing arguments
that set environment variables such as `--env-system-datapath`
This also fixes a bug where BKE_appdir logging failed since it was
called before the `--log` argument was passed.
Add asserts so this doesn't happen again.
Internally appdir functions would test if a path exists,
returning false if it doesn't, leaving the string set instead
of clearing it.
This is error prone as invalid paths could be used accidentally.
Since BKE_appdir_folder_id_user_notest & BKE_appdir_folder_id_version
depend on this, add a 'check_is_dir' argument so the path can be used
even when the directory can't be found.
Actually, fixes compile error and an incorrect poll.
Caused by 21fc4ae206 and 3a1cf838ca.
The poll has to perfrom the `view_zoom_poll()` logic to ensure correct context.
Uncovered by a4aa94c41c. Before that, it would actually be a possible `NULL`
pointer dereference.
It would happen if a `UILayout.prop()` was placed with the `full_event` option
set to `True` (or the C equivalent) for a non keymap-item property.
Now this the `full_event` option is ignored then with a warning print.
Multiple related issues:
* `view_zoomdrag_exec()` required `view_zoomdrag_init()` to be called first to
set up data. Can now easily be done in the `_exec()` function as well though.
* Because of that the operators could not be called in an `EXEC_` context (e.g.
`EXEC_REGION_WIN`).
* With "Zoom to Mouse Position" enabled, zooming from a menu or script would
zoom to the mouse position. That should only happen if the operators are
called directly in the editor.
`view_zoomdrag_init()` would perform a number of sanity checks that
`view_zoom_poll()` already executed. The design of operators forsees that
(non-expensive) context sanity checks are done by the `poll()` callbacks, and
the execution callbacks can then just assume that happened. No reason to be
overly pedantic, we don't do that elsewhere either.
Note that this code is from the earliest days of an operator design. So it's
not surprising that it wasn't using the design "properly".
This commit makes the panel expansion set based on the search results
when the active tab in the properties editor changes. The multi-tab
search patch (D8859) actually doesn't handle this because it uses a
different code path.
This feature uncovered a subtle but fairly significant issue with the
implementation of property search (More details in T81113). Basically,
the search needed multiple redraws to properly display the expansion of
panels based on the search results. Because there is no animation of
panel expansion when switching tabs, the problem was exposed only now.
With this commit, hiding of "search only" buttons and panel size
calculation happens in a single final step of the panel layout pass.
The "search only" layout root flag is removed. Instead every button
inside a panel header is in a single "uiButtonGroup" marked with a
specific "in header" flag, an idea which could be generalized in the
future.
Differential Revision: https://developer.blender.org/D9006
Change `test_path` function so:
- Joining paths calls a function instead of being performed inline.
- Optional NULL paths must always be ordered last (easier to follow).
Other minor changes:
- Remove FIXME comment is it's handled properly by BLI_path_join.
- The wrong size was being used copying into `targetpath`.
We have our own assert implementation, `BLI_assert()` that is prefered over the
C standard library one. Its output is more consistent across compilers and
makes termination on assert failure optional (through `WITH_ASSERT_ABORT`).
In many places we'd include the C library header without ever accessing it.
Revert 76b1a27f96 since there is no
reason windows should behave differently to other platforms.
This was added so Windows users wouldn't see "/tmp/" in the UI.
Since then the default temporary directory is a blank string,
leave blank on all systems as Python script authors may accidentally
use this instead of `bpy.app.tempdir`.
This last worked in v2.27 (2003) where all paths were initialized to "/"
which was still checked to initialize the temp directory.
This hasn't been the case since 932e9e8316
where it changed to "/tmp/", then an empty string (current default).
This makes it unecessary to create a button group when the block
is created, giving more flexibility when creating the first group-- for
example, creating the first button group with special parameters.
For a future patch (D9006) we need these groups for longer than just the
the layout process, in order to differentiate buttons in panel headers.
It may also be helpful in the future to have a way to access related
buttons added in the same uiLayout.prop call. With this commit, the
groups are stored in and destructed with the uiBlock.
When blend files were loaded with app-templates,
setup_app_data was running before defaults were updated.
This is likely to cause problems with order of initialization
so always update the startup file beforehand.
BLO_version_defaults_userpref_blend -> blo_do_versions_userdef
The name was misleading as it was declared along with
BLO_update_defaults_startup_blend making it seem these functions were
related.
In fact preference defaults don't need to be updated as is done for
startup.blend since an in-memory blend file isn't used.
Rename the function to match other versioning functions
called from readfile.c. Also add/update comments on these differences.
Now versioning UserDef is run in readfile.c,
as is done for other Blender data.
Previously versioning was mixed with other run-time initialization,
so it needed to be called later by the window manager.
readfile.c's versioning function was only used for 2 variables.
Move versioning into versioning_userdef.c so everything
is done in one function.
Note: DNA_struct_elem_find checks have been replaced with checks for
the next released version.
This is harmless, as only old preferences saved between releases can
have their values overwritten.
Note: userdef versioning should be called from `do_versions_userdef`,
this will be done separately.
This replaces the blue theme color for subpanel titles with the the same
fade as for parent panels.
The search color doesn't work well for subpanel title colors. And actually,
because there are often buttons with checkboxes in the panel headers, we
don't have to treat this indicator any differently than regular buttons.
Differential Revision: https://developer.blender.org/D8976
Currently there's no way to know if a button is inactive when it doesn't
match the search results, because they use the same 50% gray level.
This isn't a huge problem, but it could lead to confusion. This commit
uses a subtle solution, a 25% opacity when the button is inactive and
also filtered by search.
This requires flipping the meaning of the UI_SEARCH_FILTER_MATCHES
flag in the code, and also adding a widget_alpha_factor utility in
the widget code.
Differential Revision: https://developer.blender.org/D8975
3D Viewport -> Sidebar -> View -> Local Camera is disabled. When you
click on it, box select starts. This behavior isn't intended, and fixing
it is quite simple. The only case where this would continuing would
still be desired is if a disabled button overlapped with a non-disabled
button, but this shouldn't be the case anywhere.
Differential Revision: https://developer.blender.org/D8832
The current way of setting the compute device makes sense for local
use, but for headless rendering it it a massive pain to get Cycles
to use the correct device, usually involving entire Python scripts.
Therefore, this patch adds a simple command-line option to Blender
for specifying the type of device that should be used. If the option
is present, the settings in the user preferences and the scene are
ignored, and instead all devices matching the specified type are used.
Differential Revision: https://developer.blender.org/D9086
Define enum `eContextResult` and use its values for returns, instead of
just returning 1, 0, or -1 (and always having some comment that explains
what -1 means).
This also cleans up the mixup between returning `0` and `false`, and `1`
and `true`. An inconsistency was discovered during this cleanup, and
marked with `TODO(sybren)`. It's not fixed here, as it would consititute
a functional change.
The enum isn't used everywhere, as enums in C and C++ can have different
storage sizes. To prevent issues, callback functions are still declared
as returning`int`. To at least make things easier to understand for
humans, I marked those with `int /*eContextResult*/`.
This is a followup of D9090, and is intended to unify how context
callbacks return values. This will make it easier to extend the approach
in D9090 to those functions.
No functional changes.
Differential Revision: https://developer.blender.org/D9095
Specific armature editing undo code would duplicate and store a list of
editbones. However, those are not linked to main data storage and should
therefore never affect ID usercounting.
Armature freeing would not correctly free its editbone IDProperties.
Add a utils to free the whole list of edit bones, and properly handle
their potential IDProperties.
Freeing of bones' IDproerties from Armature `free_data` callback would always
attempt to do user refcounting, which should never be done from that code.
This would generate crashes in depsgraph/COW context e.g.
So far data management code would simply fully ignore potential ID
pointers in custom properties of edit bones (which are a copy of those
from regular `Bone`). This would lead to all kind of issues, among which
refcounting inconsistencies, missing clearing of data uppon deletion,
etc.
Picking is disabled
Affected were (at least)
- Select Linked pick
- Select Shortest Path
Was originally caused by rB8b347fc2cdc6 [which got improved in
rBfc8a7a44b200 - but only partially].
After removal of BONESEL_NOSEL we have to filter out -1 from the hits for
any bone picking it seems (since armature drawing uses this).
In rBfc8a7a44b200, this was done for 'ED_armature_edit_select_pick' (or
'get_nearest_editbonepoint' precisely), now do this for
'ed_armature_pick_bone_impl' as well.
Reviewers: campbellbarton
Maniphest Tasks: T81200
Differential Revision: https://developer.blender.org/D9080
The sticky_select_mode property is an enum where each item has a
different behavior, but currently the description is for a single one
of the items. It should be more general, especially because one of the
items is "Disabled."
A couple more problems:
- "Automatically" is not so helpful. Many things any program does are
"automatic", it doesn't really help to say it.
- "Also" is bad grammar.
- Overly complex wording
This also adjusts the SHARED_VERTEX tooltip, because "irrespective"
should have "of" after, but it's also unecessarily complex.
Differential Revision: https://developer.blender.org/D9049
Refactor `ed_screen_context()` to use `GHash` lookups instead of a
sequence of string comparisons. This should provide a nice speedup,
given that the hash for `member` only has to be computed once instead of
matching it to each possible string.
Reviwed by: brecht
Differential Revision: https://developer.blender.org/D9090
Refactor `ed_screen_context()` to call separate functions, instead of
having the entire functionality in one function. Each function now only
retrieves the data it needs from the context. Furthermore, some string
comparisons are removed.
No functional changes.
Reviwed by: brecht
Differential Revision: https://developer.blender.org/D9090
There was an oversight when adding new experimental user preferences.
I can try to overengineer this later to make it more fail-proof. But for now
it should be clear what to update when adding a new variable.
Version patching userpref.blend wasn't using the correct version,
causing settings not to be properly updated.
This seems the likely cause of T70196 and similar bugs.
The license was renamed GPL-license.txt => license/GPL-2.0txt in 0434efa09d.
Although the renaming made all the license files consistent, we are better off
not updating the copyright file in Blender. Instead we can live with some mild
inconsistency in the license names.
Trying to open the 2.74 Fishy Cat file would generate endless asserts in
customdata code. This commit refactors and cleans up the code of
`psys_get_dupli_texture` to avoid useless calls and data access, and
validate data before trying to further access it.
No behavioral changes expected here (besides getting rid of the assert).
`workspace_hook` of wmWindows store pointers for runtime data and to
data belonging to other IDs (workspace's layouts). That kind of pointers
should always be cleaned up on read, it allows for cleaner segfault
crash in case of mistakes in code updating/re-setting them, and avoids
potential security issue of accessing random memory address.
No behavioral change expected here.
Relying on pointer addresses across different data-blocks is extremely
not recommended (and should be strictly forbidden ideally), in
particular in direct_link step of blend file reading.
- It assumes a specific order in reading of data, which is not ensured
in future, and is in any case a very bad, non explicit, hidden
dependency on behaviors of other parts of the codebase.
- It is intrinsically unsafe (as in, it makes writing bad code and making
mistakes easy, see e.g. fix in rB84b3f6e049b35f9).
- It makes advanced handling of data-blocks harder (thinking about
partial undo code e.g., even though in this specific case it was not
an issue as we do not re-read neither windowmanagers nor worspaces
during undo).
New code uses windows' `winid` instead as 'anchor' to find again proper
workspace hook in windows at read time.
As a bonus, it will also cleanup the list of relations from any invalid
ones (afaict it was never done previously).
Differential Revision: https://developer.blender.org/D9073
Gathers information for time spent in the various managers or object (Film, Camera, etc.) being updated in Scene::device_update.
The stats include the total time spent in the device_update methods as well as time spent in subroutines (e.g. bvh build, displacement, etc.).
This does not qualify as a full blown profiler, but is useful to identify potential bottleneck areas.
The stats can be enabled and printed by passing `--cycles-print-stats` on the command line to Cycles, or `-- --cycles-print-stats` to Blender.
Reviewed By: brecht
Maniphest Tasks: T79174
Differential Revision: https://developer.blender.org/D8596
Followup for rB8398050695
This requires moving a few enum definitions to DNA instead of BKE, and
adding default definitions for the two structs the cloth modifier where
the cloth modifier stores its settings. The defaults are also reordered
to be consistent with the order of each item in the struct.
When a Shape Key is active, use the PBVH deformed coordinates for the
preview.
Reviewed By: sergey
Maniphest Tasks: T80873
Differential Revision: https://developer.blender.org/D8921
This was introduced in 6c9ec1c893. The overlays can now be drawn when
PBVH drawing is not enabled, but the PBVH should still exist in the
SculptSession in order to draw them. Before, it was avoiding the crash
by checking use_pbvh as BKE_sculptsession_use_pbvh_draw also checks if
the PBVH exists.
Reviewed By: sergey
Maniphest Tasks: T81268
Differential Revision: https://developer.blender.org/D9044
When using anchored strokes, inbetween events are not needed since there
is no stroke path to be reconstructed. Handling the inbewteen events are
only producing unnecessary updates, creating performance issues.
Reviewed By: sergey, brecht
Differential Revision: https://developer.blender.org/D9053
This simulation area mode moves the active area with the brush. When
enabled, the cloth brush has no restrictions on stroke length, area or
mesh vertex count.
In order to work, this enables PBVH nodes dynamically for simulation as
the stroke location moves and builds the constraints for new nodes
during the stroke. When a node is not inside the simulated area, all the
constraints that were created for it and vertex collisions are not
computed. The simulation limits falloff areas and constraints tweaking
control how the simulated and no simulated nodes blend.
Reviewed By: sergey, zeddb
Differential Revision: https://developer.blender.org/D8726
1ul << n will still be a 32 bit integer regardless
of the value of n, given the target here is 64 bits
the upper 32 bits will always be zero. Using 1ull
will yield the expected result.
This removes `foreachObjectLink` from `ModifierTypeInfo`, `GpencilModifierTypeInfo`
and `ShaderFxTypeInfo`. There is no need to have both, `foreachObjectLink` and `foreachIDLink`.
There is not code that actually depends on `foreachObjectLink`.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D9078
The adds a new option to simplify volumes in the viewport.
The setting can be found in the Simplify panel in the render properties.
Volume objects use OpenVDB grids, which are sparse. For rendering,
we have to convert sparse grids to dense grids (for now). Those require
significantly more memory. Therefore, it's often a good idea to reduce
the resolution of volumes in the viewport.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D9040
Ref T73201.
Remove the workaround for T59395 that increases the minimal refinement to 2
to work around an OpenSubdiv bug. This bug appears to be fixed in the latest
OpenSubdiv version we are using.
Problem found by Piotr Ostrowski.
Ref D9076
As noted in T80164, there are quite a few area of Blender where the
"Reset to Default Value" operator in button context menus doesn't work.
Modifiers are one of them, because the DNA defaults system was never
set up for them.
Additionally, this should make modifier versioning easier. Whenever a
new field is added it should be automatically initialized to the
default value.
I had to make some ordering changes in the following modifiers to work
around an error with `-Wsign-conversion` in the macros:
- Solidify Modifier
- Corrective Smooth Modifier
- Screw Modifier
Some modifiers are special cases and are skipped in this commit:
- Data Transfer Modifier
- Cloth Modifier
- Fluid Modifier
- Softbody Modifier
Differential Revision: https://developer.blender.org/D8747
This was already changed for Material nodetrees on duplication in
rBa75ac18638f4.
Since it is not obvious from the UI how change World actions - and to be
consistent with Material actions, it is best to copy the action as the
default behavior.
So use generic BKE_id_copy functions with LIB_ID_COPY_ACTIONS flag [which
also enables us to get rid of `BKE_world_copy`]
Note: taking the User Preference `USER_DUP_ACT` into account here (for
both material and world actions) could be a followup step.
Maniphest Tasks: T81248
Differential Revision: https://developer.blender.org/D9046
Most collection operations should not be allowed when either the scene
or the parent collection are linked or liboverrides.
This commit adds more stricter checks in both polling and execution
aspects of several related operators.
Fix T81282: Crash on instance to scene of a collection of a linked scene.
Now Wintab is not initialized when starting Blender with the tablet API
preference set to native, since that disables Windows Ink.
Note that changing the tablet API requires restarting Blender for changes
to take effect. This serves as a stopgap to allow use of Windows Ink until
runtime API switching is merged.
Differential Revision: https://developer.blender.org/D9051
- Rename `find_elem` to `elem_offset` (matching `elem_exists`).
- Remove unused `SDNA_StructMember` return argument.
- Return an offset instead of a pointer which was being converted
back into an offset by one caller,
in this case there was no way to tell the difference between
and element that doesn't exist and a struct member
at the start of the array.
Resolves UBSan warning raised in T81340.
It looks like this code was left over from tabbed panels in the
properties editor. It wasn't used anywhere except for in one line of
the horizontally-aligned panel code that was recently removed.
Differential Revision: https://developer.blender.org/D8651
Running Blender on Ampere cards was already possible with ptx, this fix is
needed to support building CUDA binaries.
Note the CUDA version used for official Blender builds is still 10, this is
merely the change to make it possible for those using CUDA 11 and specifying
the sm_8x kernels to be compiled.
Found by Milan Jaros.
This adds the option to either smooth the entire boundary, or to keep
corners sharp, for the Subdivision Surface and Multiresolution modifiers.
This mainly helps with compatibility with other software. The default
behavior remains to smooth the entire boundary.
Differential Revision: https://developer.blender.org/D8485
This makes subdivision surfaces compatible with the old subdivision
surface modifier and other applications that do not use the limit surface.
This option is available on the Subdivision Surface modifier.
Differential Revision: https://developer.blender.org/D8413
On user level this fixes dead-lock of OpenCL render on Intel Iris GPUs.
Note that this patch does not include change in the logic which allows
or disallows OpenCL platforms to be used, that will happen after the
kernel fix is known to be fine for the currently officially supported
platforms.
The dead-lock was caused by wrong usage of memory barriers: as per the
OpenCL specification the barrier is to be executed by the entire work
group. This means, that the following code is invalid:
void foo() {
if (some_condition) {
return;
}
barrier(CLK_LOCAL_MEM_FENCE);
}
void bar() {
foo();
}
The Cycles code was mentioning this as an invalid code on CPU, while in
fact this is invalid as per specification. From the implementation side
this change removes the ifdefs around the CPU-only barrier logic, and
is implementing similar logic in the shader setup kernel.
Tested on NUC8i7HVK NUC.
The root cause of the dead-lock was identified by Max Dmitrichenko.
There is no measurable difference in performance of currently supported
OpenCL platforms.
Differential Revision: https://developer.blender.org/D9039
Implemented Brown-Conrady lens distortion model with 4 radial and
2 tangential coefficients to improve compatibility with other software,
such as Agisoft Photoscan/Metashapes, 3DF Zephir, RealityCapture,
Bentley ContextCapture, Alisevision Meshroom(opensource).
Also older programs: Bundler, CPMVS.
In general terms, most photogrammetric software.
The new model is available under the distortion model menu in Lens
settings.
For tests and demos check the original patch.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9037
The "UI_panel_set_expand_from_list_data" doesn't need to be in the
public API since it's just called every time an instanced panel is added.
This commit just sets the expansion automatically and adjusts some
naming to account for the moved function.
Before this change, when users switch from edit mode to sculpt mode, the
entire mesh would be visible. Even if in the edit mesh mode part of it was
set to invisible.
With this change the visibility is preserved, by creating a separate face set
for the visible and invisible parts of the mesh and setting their initial visibility.
Implementation details: This adds a function to initialize a new Face Set
datalayer taking the current mesh visibility into account which is stored
in the ME_HIDE flag of the vertices.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8901
This tool projects all vertices to the right of the plane defined by the
line gesture towards the plane. By doing this, this tool can create cuts
and plane surfaces in the mesh without modifying the geometry or using
boolean operations, so it is much faster than bisecting the mesh for
cases where the geometry was going to be remeshed afterwards.
Added as experimental as it does not have icon.
Reviewed By: sergey, Severin
Differential Revision: https://developer.blender.org/D9021
`SOCKET_OFFSETOF` was added in the initial commit {rBec51175f1fd6c91d5}
when `offsetof` [1] was not supported well enough. GCC and LLVM
support it since C++17.
Other two changes: type and size check can be done without creating
an invalid address too.
[1] https://cppreference.com/w/cpp/types/offsetof
Reviewed By: campbellbarton, brecht
Maniphest Tasks: T81100
Differential Revision: https://developer.blender.org/D9042
This took more than a day to fully investigate and understand, one of
the reasons being that the probability of the issue to show up was
extremely low, and subjected to very specific random factors.
Root of the issue is that, in some very rare cases, a newly read ID
might get the exact same memory address as the one it had when the blend
file was saved.
In that case, `BKE_workspace_active_set` would return immediately, since
the pointer to the active workspace would remain unchanged. But that
lead to having an unset NULL active layout pointer, which would crash
when attempting to get e.g. the active screen.
For the record, I ran into this when running a specific build (master
with one flag added to the `LIB_ID_CREATE` ones, with value `1 << 3`),
using a specific set of options (`--background --factory-startup -noaudio`),
and passing the .blend file from T80090 as argument.
Remove the attempt to update the active layout pointers of each window
from whithin `direct_link_workspace`.
This piece of code was a nonsense for at least to critical reasons:
* Do not, never, ever, access data from another datablock within the
direct_link_... functions. Just don't. Don't try to be smart.
* Since it was trying (and failing) to update the active layout of every
window for every workspace, it was effectively setting those
`act_layout` pointers to NULL (remapping can only ever happen once,
trying to remap and already remapped new pointer is bound to fail in
any case).
Luckily (and funnily), this piece of code was actually harmless, since
setting the active layout would be overridden/redone later, in
`lib_link_windowmanager`, when updating their `workspace_hook` in
`lib_link_workspace_instance_hook`.
Note that the similar horror with `WorkSpaceDataRelation->parent` (which
points at a window) is kept for now, because that one is needed. Hope to
refactor it soon though.
Although I haven't seen this cause any visible errors, there is some
incorrect handling for setting panel expansion during search:
- Properly check if child panel is active first
- Don't stop traversal at headerless panels that could theoretically
have children
Add an option to disable Alembic vertex interpolation.
Bump subversion from 5 to 6.
Alembic stores mesh samples at specific time keys; when a frame in
Blender maps to a timecode between two samples, Blender will interpolate
the mesh vertex positions. This interpolation only happens when the mesh
has a constant topology, but sometimes this was not detected properly
when the vertices change order, but the number of mesh elements remains
the same. This would result in a mesh with jumbled up vertices (T71981).
With this patch, users have the ability to disable vertex interpolation.
An alternative would be to have better detection of topology changes,
but that that'll cause a considerable slowdown.
Maniphest Tasks: T71981
Differential Revision: https://developer.blender.org/D9041
This modifier can only be added to Volume objects. It takes a mesh
as input and generates a "density" grid near the surface or in
the enclosed volume.
Ref T73201.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D9032
Previously, one could only select a volume object in the outliner
or by clicking on the object origin. This patch allows you to click
on the actual volume.
Furthermore, the generated (invisible) mesh that is used for
selection is also used to draw an outline for the volume object now.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D9022
When loading large files that are more than a couple weeks old
(such that DNA has changed in that time), a significant amount of
time is spent in `DNA_struct_reconstruct`. This function takes a struct
in the old layout and creates a struct in the new layout from it.
This was slow because it was computing the diff between the struct
layouts every time a struct is updated. Now the steps for the struct
reconstruction is computed only once per struct. This information is
then used to actually reconstruct all structs that changed.
I measured about 10-20% speedup when loading Spring files.
E.g. `10.6s -> 8.7s` for `06_055_A.anim.blend` in BKE_blendfile_read`.
This percentage varies a lot based on the number of blocks that have
to be reconstructed and how much DNA has changed since they have
been written. In none of my tests was the new code slower than the
old code.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D8959
The data layout remains exactly the same..
This change just gives all the elements in `SDNA->structs` names,
making it more comfortable to work with the data.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D8926
The behaviour is a bit different from other find modules:
`FFMPEG_FIND_COMPONENTS` should contain the
list of required libraries before calling `find_package(FFmpeg)`.
If not set, a default set of most common libraries is searched for:
`avcodec avdevice avfilter avformat avutil`
http://ffmpeg.org/download.html
Ref D8855
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8918
Add a dependency graph relation Force Object Animation → Scene Rigid
Body World Rebuild. This ensures that the rigid body world is rebuilt
when a force object is re-tagged for animation updates.
The extra relation doesn't add any new calculations when the animation
is running, as the Time Source node already had a relation to the
scene's `RIGIDBODY_REBUILD` node.
The relation is created directly to the `RIGIDBODY_REBUILD` Operation. I
would have liked to target the containing Component instead. However,
that has the `RIGIDBODY_SIM` operation as entry node, which isn't enough
to actually fix T80121.
Reviewers: Sergey
Differential Revision: https://developer.blender.org/T80121
Draw dashed lines for object child hierarchies in the outliner. This
makes the difference between collection and object hierarchies more
clear. Dashes are also consistent with viewport relationship lines.
Differential Revision: https://developer.blender.org/D8997
Compare mesh loop count with number of loop normals before reading the
loop normals.
Houdini doesn't always write the correct loop normals to Alembic. When a
mesh is animated and then replaced by a fluid simulation, Houdini will
still write the original mesh's loop normals, but the mesh
verts/loops/polys are from the simulation. In such cases the normals
cannot be mapped to the mesh, so it's better to ignore them.
Simplify `anim_flush_channel_setting_up()` by flipping conditions and
returning early. This makes it easier to understand what is actually
happening in the code.
No functional changes.
Split up `ANIM_flush_setting_anim_channels()` into smaller functions. This
makes it easier to understand how it works, and makes future improvements
also easier.
No functional changes.
In the 3D view sidebar, the active tool settings panel can be pinned to other
categories, and in those other categories it doesn't redraw when the active
tool changes. This commit checks for pinned panels from the "Tool" category
when checking whether to redraw.
Note that the relatively expensive string comparison is only done for
currently visible pinned panels.
Differential Revision: https://developer.blender.org/D9012
This adds support for line gesture to SculptGestureContext and
implements a Mask Line tool, which affects everything to the right of a plane
defined by the straightline gesture.
For this to work, a new WM_gesture_straightline_oneshot_modal is needed
which only runs exec when the gesture is over.
Added as experimental as it does not have icon.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D8722
face_set_color_default was not copied when copying meshes, so when
extracting the colors in the draw cache it was using a wrong default
color ID.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8957
This reverts commit 5eb5978043.
The change was problematic:
*Advanced users may prefer managing schemes manually and adding only
a few that they need, instead of one for every library/executable
Blender builds.
*If CMake creates schema files, it overwrites the changes a developer
made every time CMake is run. If Xcode creates scheme files, it keeps
settings/ environment variables intact.
If someone runs CMake very frequently, pass
`-DCMAKE_XCODE_GENERATE_SCHEME=ON` to `cmake` while configuring.
I didn't realize there were more duplicates while committing
{rBf1fee433be92}.
Original was added in {rB83f8223543f58c3b0881a03b6e9ddffff91}.
Duplicate was added in the merge {rB9e09b5c418c0a436e3c84ccf}.
Ref D8822
Setting `PLATFORM_LINKLIBS` is not required for clang, compiler and
linker flags are enough. Note that the change made in
{rBa4c5811e2127}) to `platform_apple.cmake` (appending to
`PLATFORM_CFLAGS`) has not been reverted. platform file shouldn't be
overwriting the flags.
`PLATFORM_LINKFLAGS` is overwritten by `platform_apple.cmake`, so no
point in setting it. Fixing that like `PLATFORM_CFLAGS` is out of the
scope of this change.
`PLATFORM_LINKFLAGS_DEBUG` has been replaced with generator expression
to include RelWithDebInfo and MinSizeRel build types also.
Object in the 2.7x file is on no layer at all, while this is not really
expected nor considered valid, better to cope with the case gracefully
than crash.
To be backported to 2.90 and 2.83.
Where the if statement was just a check for an error or an unhandled
condition and there are no else statements, the rest of the function
doesn't need to be indented.
Before, it might have been possible in some cases (when there were no
items at all anymore in the collection) to miss that cleanup step,
leaving ghost useless and invalid operations around.
These breadcrumbs used to be a panel in 2.79 and 2.80 development.
If a file was saved in those versions, and the panels rearranged in a
version that didn't have this panel, its sortorder would be changed
even though it wasn't visible or even used in that version.
A simple fix is to use a new ID name for the new version of this
panel in 2.91. "Buttons" is an old name anyway.
These tooltips mostly just repeated the property names, which is not
helpful at all. Changing that leaves space to be much more specific
about what the properties actually do.
Differential Revision: https://developer.blender.org/D8994
This was the behavior in old versions of blender.
During a transformation operation, when pressing a contrain key, the chosen
orientation is that of the scene.
If you press the same key, the orientation changes to Global or Local.
However, if you choose another contrain axis with the orientation changed,
the orientation does not return to the set for the scene.
It remains Global or Local.
Now when changing a contrain axis, no matter what the current orientation is,
it always returns to the scene orientation.
Actions are either locked to a specific ID type, or "floating". Actions
in the floating state are now locked when they are assigned to an ID block.
Previously (rB94b99b5d4a7c20cf2) this was done at evaluation time, which
caused various problems:
- The ID type was set on the evaluated copy, and inconsistently flushed
back to the original.
- A newly created Action could not be assigned to an Action constraint,
unless a depsgraph evaluation was be forced first.
This is now resolved by calling `BKE_animdata_set_action()` to set the
action (instead of direct assignment) where possible, and calling
`BKE_animdata_action_ensure_idroot()` otherwise.
Manifest Task: https://developer.blender.org/T80986
Reduce complexity of `rna_SpaceDopeSheetEditor_action_update()` by flipping
conditions and returning early.
The depsgraph tagging has slightly changed, in that the depsgraph is not
tagged at all when there is no actual animation data added. I still see
this as a non-functional change, though, as in that case nothing changed
and tagging and re-evaluating wouldn't make any actual difference.
No functional changes.
Simplify `BKE_animdata_set_action()` by flipping some conditions and using
early returns, and document which parameters can be `NULL`.
No functional changes.
This reduces the number of places that have to be modified
when a new modifier is added.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D9000
With this change `outliner_draw.c` does not have to be
edited anymore when a new modifier is added.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D8998
Handling of pointer replacements in collection items lead to validating
all operations for a given property, when some might actually be no more
valid and would need to be cleaned up.
Related to T81059, found while investigating it.
Print out messages into console instead when se cannot find expected
data (this is actually normal when source library gets edited).
Note that there seems to be some issue with the 'auto-cleanup' mechanism
removing no more valid override rules on file save, will check on that
next.
Related to T81059, found while investigating it.
Fully revert D7913 "Fix T77276: Generating Python API docs raises many warnings"
{D7913} broke xrefs/links to other types and permalinks in the docs. This makes the python api docs for 2.90 and 2.91 completely unusable.
It got partially reverted in commit e893430a63. That didn't fix those two issues though, so it should be fully reverted.
As you can see here, i'm not able to click `bpy_struct.id_data`, because no <a> tag got generated in the html.
{F8889934}
Here you can see a working, but wrong permalink, generated by clicking the little chain. (It should be `bpy.types.MeshVertices`, not `bpy.types.MeshVertices.MeshVertices`)
{F8889938}
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D8913
The operator has some problems with Undo, so better put it in
experimental for now.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D9007
We can only re-apply overrides fron the old local overrides to the newly
generated ones after all IDs have been properly remapped and renamed.
Otherwise override operations based on ID names may fail.
Related to T81059, found while investigating it.
Part of the code handling deletion of old, not needed anymore local
override IDs, was not working properly, effectively only deleting one
ID ever.
New code should also be a bit faster, though this should not be really
visible from user perspective.
Related to T81059, found while investigating it.
This commit replaces the BVH Tree currently used by the Weld Modifier
with the KD Tree used by `Merge > By Distance`.
This changes the result of the Weld Modifier to more closely match
`Merge > By Distance`.
There is also a big performance advantage.
Here is an overview (models in D8995):
| 2.90 (Duplicate Limit = 0) | 2.90 (Duplicate Limit = 1) | master (BVH) (Duplicate Limit = 1) | patch (KD) |
| 1.69s| 0.17s | 0.12s | 0.029s |
Differential Revision: https://developer.blender.org/D8995
More agressive optimization made the results differ a bit more than the
current error margin would allow. Bump the error margin to be 1e-6
instead of the previous 0.5e-7.
Since the search is applied all in one phase, there is no need to store
a reference to the search filter in every uiBlock. Instead just pass it
as an argument to UI_block_apply_search_filter.
Root of the issue is how we generate the storage ID for the differential
override operations.
However, since those are disabled anyway currently, simply comment out
creation of this copy for now, we can revisit this if/when we decide to
re-activate differential overrides.
Related to T81059, found while investigating it.
Before we would continue checking normal array values even if we knew
that the normal array would be conidered valid.
Break early to avoid excess iterations and make the code more clear what
it is doing.
No functional changes.
In very rare occations, the returned derivates would be the same. This
would lead to the normal calculation breaking (zero normals).
Solution: Add this edge case to the other corner case checks.
Reviewed By: Sergey
This is was caused by incorrectly set `preview_render_size` in VSE
rendering context. Value was set to `SEQ_PROXY_RENDER_SIZE_FULL`, but
it should be `SEQ_PROXY_RENDER_SIZE_SCENE` as scene render size is
being used.
Alternatively we can check for `context->for_render` in
`input_preprocess()`, but I think fix above is more correct.
Reviewed By: sergey, brecht
Maniphest Tasks: T80424
Differential Revision: https://developer.blender.org/D8838
Tag an Action for recalculating animation when it's pushed down onto the
NLA stack, as its effective boundaries change. Normally an Action spans
all of the timeline, and the effects of Cycle modifiers are visible
everywhere. When the Action is converted to an NLA clip, the modifier's
effect should only be visible for the duration of the NLA clip.
Since porting this to C in rB850234c1b10a, Smart UV Project would not
add a UVMap (if none existed already) anymore.
Not having a UVMap already is a reasonable situation though when e.g.
starting off fresh by deleting an existing UVMap or also when applying
certain generative modifiers. This is also inconsistent with all other
unwrap operators (all of them will create a UVMap if none exists
already)
Differential Revision: https://developer.blender.org/D9001
For the final builds instead of leaving all the license files in the main
folder, we move them to a "license" folder.
Also, adding more licenses here (MIT, Apache, ...).
Differential Revision: https://developer.blender.org/D8999
Original was added in rB83f8223543f58c3b0881a03b6e9ddffff91.
Duplicate was added in the merge rB9e09b5c418c0a436e3c84ccf.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8822
Setting the search match flag every time property search runs can
invalidate the results for panel headers. Instead, clear the flag on
every redraw and or the result of every search in the panel to it.
The "bevel_factor" for curves also applies when there is no bevel and
only extrusion. rB4e667ecef92f addressed this by moving the factor
and mapping properties to their own subpanel, but the property
descriptions still don't reflect that. This commit replaces "Bevel" with
"Geometry" for this situation. The property identifiers are not changed.
Own mistake in rB9dcae4eb17d7b.
We cannot use ED_object_constraint_active_list in uiTemplateConstraints
since it is dependent on mode (pose vs. object). Now get object
constraints directly when use_bone_constraints is false.
Note: unfortunately a derivate of this bug has made its way into 2.90.1
Maniphest Tasks: T81057
Differential Revision: https://developer.blender.org/D8989
Do not escape flow / effector objects if they have a disabled use flow / use effector flag.
Vertex velocities still need to be kept track of in order to have correct object velocities when enabling flows / effectors intermittenly. It is possible though to skip the emission loop if the flags are disabled.
This fixes and reverts commit c7287ffaec
Due to hardcodded keys, the modifier for auto contrain plane did not
work with custom keymaps and was in conflict with other keyitems.
Its usability is also confusing since it cannot be used without
`MOD_PRECISION`
But instead of removing it, it is better to make this modifier compatible
with custom keymaps and keep the conflict.
Caused by still having 'texture_opacity' in the preests and the preset
operator (but this was removed in the 2.83 rewrite).
Maniphest Tasks: T81081
Differential Revision: https://developer.blender.org/D8990
This code is not used by the new fluid simulation system.
Therefore, it does not make sense to keep it around.
We do want to integrate the fluid system with the generic cache
system eventually, but refactoring the system is easier when there
is less dead code that has to be refactored.
Note, I could not remove BKE_ptcache_id_from_smoke entirely yet,
because the depsgraph seems to expect that object that
uses DEG_add_collision_relations also has a pointcache.
That is because it wants to reset the point cache when any of the
other objects changed (this does not work with fluids currently).
Reviewers: sebbas
Differential Revision: https://developer.blender.org/D8987
Script create_msix_package.py will download the ZIP file
from the given URL. It will create the MSIX package
with the version number and publisher ID given.
Strongly recommended are the path to a valid PFX file, and the
password to use that PFX file. These are needed for signing
the resulting MSIX package. The signing step is optional though,
but the resulting MSIX package cannot be installed outside of the
Microsoft Store
Example
set VERSION=2.83.2.0
set URL=https://download.blender.org/release/Blender2.83/blender-2.83.2-windows64.zip
set PUBID=CN=PUBIDHERE
set PFX=X:\path\to\cert.pfx
set PFXPW=pwhere
python create_msix_package.py --version %VERSION% --url %URL% --publisher %PUBID% --pfx %PFX% --password %PFXPW%
Requirements:
* Python default from the Microsoft Store should do (3.8)
* requests can be installed with `pip install requests`
Note that for an LTS release that gets uploaded to its own LTS application release
in the store you need to specify the `--lts` switch on the command-line to the script.
Upon completion there will be a file with the
name blender-2.83.2.0-windows64.msix. In case PFX file and its password were
given on the command line MSIX package will also be signed for the Microsoft Store.
Related Wiki page: https://wiki.blender.org/wiki/Process/Release_On_Windows_Store
Reviewed By: jbakker
Maniphest Tasks: T77348, T79356
Differential Revision: https://developer.blender.org/D8310
In the end the process is surpringly simple, we only need to manually
convert the proxy itself into an override (which is trivial), and then
run common code with the default 'make override' operation.
Fix T81059: Add operator to convert proxies to library overrides.
Some RNA setters require ID data they operate on to be in G_MAIN.
Unfortunately, when we apply overrides as part of a .blend file reading,
new Main is not yet made global one, so we have to do it temporarily
here.
This is a fairly ugly hack, but it should be harmless and safe.
This is a first step towards supporting conversion of proxies, done
separately to make it easy to pinpoint in case it would create problems.
It is not expected to cause any change in behavior currently.
Constructive modifiers were not initializing an original index layer
in the case a previous deform modifier created 'mesh_final'.
This happened in the case of multiple deform modifiers that deform along
normals, as requesting normals caused the final mesh to be created.
Ensure mapping data is created in the case
only non-constructive modifiers have run.
Mainly a UI adjustment, no functional changes
To have the default mode in the advanced panel as separated option is not the best solution.
Now, there is a pin option and when it is enabled, the brush keeps this mode.
Differential Revision: https://developer.blender.org/D8974
The problem is due to lack of precision with small and coplanar triangles.
Also, triangles that have vertices with the same coordinate are at the
threshold of the intersection.
We could add an epsilon to consider the minimum distance for intersection.
But that would add a lot of overhead to the code.
The solution used is to increase precision using doubles.
Some characters: `'`, `"`, and `\`, can cause problems with RNA paths.
Instead of using more complicated handling to deal with those cases,
we can just prevent these characters from being used in custom property
names.
This commit checks for these characters to `idp_try_read_name`, where
other checks like length are already done.
Differential Revision: https://developer.blender.org/D8839
Those flags are meant for detecting which socket has changed, so in the
future we can have more granular updates.
`Node` now stores an `update_flags` member which is modified every time
a socket is changed though `Node::set`. The flags are or-able bits
stored in `SocketType` instances. Each `SocketType` stores a unique bit
out of 64, for the 64 bits of an uint64_t; the bit
corresponds to the index of the socket in the `Node`'s sockets array +
1, so the socket at index 5 will have the 6th bit set as its flag. This
limits us to 64 sockets per Node, which should be plenty for the current
set of `Nodes` that we have.
This does not change the behavior of other parts of Cycles.
This is part of T79131.
Reviewed By: brecht
Maniphest Tasks: T79131
Differential Revision: https://developer.blender.org/D8644
This refactor is in response to an unreported bug in which overlapping, moving colliders produced an unstable simulation.
Things that change apart from cleanup through this refactor:
- Effector objects with no velocities (either non-animated or animated but non-moving object) will explicitly set zero velocities in their flow bounding box.
- When applying object velocities to the global grid, they will now be accumulated per cell (add and not set velocities). Later they will be averaged with the object count at any cell.
The OpenVDB update added a load() function. This function clashes with a helper IO function (only used when exporting and running the simulation externally) that was also named load().
Removed invel MAC grid since it is sufficient to use the cell centered vec3 representation. When setting initial velocities these will be interpolated by the setter functions.
With the new image editor drawing there were was some mutual exclusive
functionality. When rendering the alpha was shown correctly or the pure
emissive colors were shown correctly, but never both. The cause of this
is that the image_gpu did not used the correct alpha mode when generating
gpu textures for non-images (render results, compositors viewer)
The implementation always checked the alpha_mode. Alpha mode is an
attribute for images, but aren't set for non images. This patch adds
a more detailed check to ensure that the gpu texture is premultiplied.
The issue has been tested using several bug report files and production
files.
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D8978
Since {D8234} the image editor is drawn using a depth buffer.
When using `draw_texture_2d` the image is drawn using the 2D_IMAGE
shader. inside the vertex buffer the image was pushed to the background.
This was introduced by {648924333234} what seems to be out dated as we
have done several overhauls in this area. (workbench refactor, overlay
engine refactor, color management pipeline).
This patch removes the pushing of the image to the background.
During viewport render animation the gpu textures weren't tagged as
invalid. As the image uv editor now draws the gpu texture only the first
was shown as it wasn't refreshed with the actual image data.
I created a bugreport T80859 earlier.
The problem is in the file source/blender/editors/sculpt_paint/paint_image_proj.c (line numbers against commit d376aea61)
at the lines 5309 and 5320 the functions `IMB_rect_from_float(...)` and `IMB_float_from_rect(...)` are called from threaded code on a shared ibuf.
However, ps->reproject_ibuf is shared between threads, so this is not thread-safe.
This is a race condition and leads to wrong output when projecting float data onto a uchar texture or vice versa on a multithreaded system.
The checks on line 5308 and 5319 are already a race condition.
I created this patch which fixes the problem , but I'm not sure if I'm overlooking something.
This makes sure reproject_ibuf contains the correct formats *before* the threadpool is started.
I replaced the original location of the conversions with BLI_asserts(). That may be overkill?
Reviewed By: #sculpt_paint_texture, mont29
Maniphest Tasks: T80859
Differential Revision: https://developer.blender.org/D8936
When introduced in rB1ca1744c29e2, the Weight Paint Overlay XRay's
corresponding depth pass was not considering clipping planes.
Maniphest Tasks: T81013
Differential Revision: https://developer.blender.org/D8970
target in certain situations
Regression from rBdeaff945d0b96.
mesh_ensure_looptri_data would overflow.
Crash would only happen if a Data Transfer modifier (transferring
UVs) follows, so exact reason for this is not yet entirely clear. Also
there are edit-mode versions of the following BVH lookup functions so it
could be avoided (since this is a expensive operation), marking as TODO.
Similar fix as
- rB0945a79ed1eafae444d3021a5912cb39801a7209
- rB56d7e39b92997768b3db8ce2dbc262f869994145
Reviewers: mont29, campbellbarton
Maniphest Tasks: T80996
Differential Revision: https://developer.blender.org/D8973
The placement of the start and end factor and mapping settings for
curves has been quite misleading for a long time. They were in the
"Bevel" subpanel, but they aren't related to bevel because they affect
curves with only extrusion and no bevel.
This commit moves these properties to their own subpanel, labeled
"Start & End Mapping".
Differential Revision: https://developer.blender.org/D8910
This commit contains the Performance improvement, that was originally
proposed in D8966.
It improves the performance of the Weld Modifier by a lot.
It had a loop with execution time O(N^2) which is now O(N*log(N)) at a
bare maximum.
This patch adds a new operator to convert a black and white image into
grease pencil strokes.
If the image is not B/W, an internal conversion is done.
This is the first operator using Potrace, but we expect to add more features in next Blender versions.
Reviewed By: HooglyBoogly
Maniphest Tasks: T79877
Differential Revision: https://developer.blender.org/D8951
The issue was two fold.
First something sets the loop element tag and doesn't clear it before
the UV code in question tries to use the tags. Added a sanity clear to
make sure that it operates on a clean tag state.
The next one was that the UV maps in question had quite a few points
that had zero length UV loop edges. This would lead to division by
zero.
Reviewed By: Jeroen Bakker, Brecht
Differential Revision: http://developer.blender.org/D8967
It's generally considered a better codestyle to check conditions early
and exit early when they are not met, over having most logic of a
function within a big `if`-block. Otherwise people have to go over the
entire block to see if there's possibly an `else` somewhere, or any
followup logic.
There's the old and ugly hack where the `uiBut.poin` points to the
button itself. When reallocating the button we have to update that
pointer of course.
Those two functions had `BKE_` prefix, were defined in BKE headers, but
implemented in ED code, yuck.
Moved everything to ED area for now, since those do not look fondamental
enough to belong to BKE, and none of their usages requires it currently.
As noted by @lichtwerk (thanks), one can have a local object and/or
material using a linked image data-block, this case needs some different
handling to prevent painting on such linked image.
For now, tweak `BKE_paint_proj_mesh_data_check` (eeeek, that name
prefix!) to consider paintslots with linked image as 'non-existing'.
The function this was in already checks the conditions under which it
can operate (as it should). No need to force the caller to do these
(quite specific) checks, the function can just do nothing if the button
doesn't need these operations.
Otherwise we'd have to always execute these checks before calling, which
makes calling it a hassle, makes the code harder to follow and generally
harder to maintain (what if the conditions change?).
Allows scripters to store additional information in the marker itself instead
of using work-around approach based on marker names and such.
Differential Revision: https://developer.blender.org/D8944
Originally was noticed when transforming mesh created by
object.to_mesh() from an object without modifier, in which case the
result references CustomData layers used by the object itself.
The issue goes a bit deeper: mesh.transform() should never modify
referenced layers, hence it should duplicate referenced layers.
This fix changes one specific aspect of the reported behavior. The
case where vertices coordinates are modified manually will still have
affect on the source mesh (as no referenced CustomData layers are being
duplicated). Proper fix for this case is not yet clear to me.
Differential Revision: https://developer.blender.org/D8939
The issue was that the pointcache was not storing dead particles,
even though they are displayed. This lead to the rendering issue,
because only alive particles can be read from the point cache in
the frame that is rendered.
This also fixes an issue unrelated to rendering: when dead particles
are displayed, their position is incorrect when some frames are
skipped during playback.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D8907
Keep braces balanced where possible, even with ifdef's as it avoids
confusions with editors calculating correct indentation level &
finding matching brackets.
This patch tries to sanitize the types of our size parameters across our read
and write code, which is currently fairly inconsistent (using `int`, `uint`,
`size_t`...), by using `size_t` everywhere. Since in Blender file themselves
we can only store chunk of size `MAX_INT`, added some asserts to ensure that
as well.
See {T79561} for details.
Differential Revision: https://developer.blender.org/D8672
Collections of liboverride data only support insertion of new items (and
deleting or moving those around). No operation on existing items from linked
data is allowed.
Reflect that in RNA functions used to edit py-defined RNA collections.
Note that this is not ideal currently, it does the job but feedback to
user is rather poor. Ideally add-ons should implement higher-level
checks for override cases in their operators.
Supporting IDProperty-based data storage here in a generic way is fairly
simple, unlike actual RNA data (DNA-based), for which getting a proper
generic way to duplicate them from within RNA is currently not really
possible.
Part of T79562.
The bevel type is a more useful check for graying out this property
because its effects will be apparent before choosing an object. Before,
the fill type property would only gray out with a bevel object selected.
Warp & weight vertex-group editing modifiers miscalculated vertex weight
inversion, the weights were multiplied before being subtracted from 1.
Ref D8241
Build modifiers linked or copied to objects from the outliner would not
animate until the file was saved and reopened due to a missing depsgraph
relations tag.
Light rotation is supported both in world and view light orientation in
lookdev, so no reason to disable it.
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D8958
Expanded objects with children immediately after a colored collection
would have the color applied to their hierarchy lines as well. The fix
is to reset the collection color to `COLLECTION_COLOR_NONE` for each
open subtree.
Based on http://jcgt.org/published/0008/01/03/
This is a simple trick that does *not* have a huge performance impact but
does work pretty well. It just modifies the Fresnel term to account for
the multibounce energy loss (coloration).
However this makes the shader variations count double. To avoid this we
use a uniform and pass the multiscatter use flag inside the sign of f90.
This is a bit hacky but avoids many code duplication.
This uses the simplification proposed by McAuley in
A Journey Through Implementing Multiscattering BRDFs and Area Lights
This does not handle area light differently than the IBL case but that's
already an issue in current implementation.
This is related to T68460.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8912
The search should check if a panel is active before changing its
expansion, otherwise it sets the expansion for all of the region's
panels, even invisible ones in other tabs.
This was causing flashing colors in the node editor grid.
This is because in some cases the flat color is only set on the provoking
vertex which is the last of the primitive by default.
This makes wide line supported on MacOS and other implementation that
does not support wide line by default.
This workaround works for all Line types but only if using one of the 5
default shaders.
The workaround is completely isolated and invisible to the outside. It has
no side effect.
Note: This does not affect the GPUBatch drawing.
This is not an exhaustive change, just for the 2D cursor and
UDIM grid properties. Also vertically align the "UV Vertex"
buttons like in the 3D view panels.
Checking for the layout alignment is not a reliable way to filter out
which items need the additional icon/text offset. Instead check if the
buttons are icon-only (which we rarely do, e.g. for collection colors in
the Outliner context menu).
For example you can now start entering text in the Properties or
Outliner search, and press the 'x' while the button is still in
text-edit mode.
This way you don't have to exit text editing first, before being able to
quickly clear the string with a mouse click. So this is a small
improvement for convenience.
It also works for the eyedropper (change to picking an object while text
editing) or the '+' and '-' icons in the file saving dialog.
E.g. the 'x' icons or eyedropper icons in text buttons. They didn't use
to have any mouse over feedback, now we dim the icon until hovered.
This kind of feedback helps users see that the icons are interactive,
and if they are within their interaction hotspot.
I think this wasn't allowed before because the section of a curve was
built in multiple parts. But since rBe34d3e32dda7, the whole slice
of a curve is built in one piece, so we can easily support curve
caps for all geometry types, including the new custom profile option.
Note that this also allows "caps" when the fill type is not full.
They could easily be disabled by checking for "Full" fill type
if that was preferred in the future.
See the patch for images.
Differential Revision: https://developer.blender.org/D8911
This adds XYZ symmetry as a property of meshes and updates all modes to
use the mesh symmetry by default to have a consistent tool behavior
between all modes and when switching objects.
Reviewed By: brecht, mano-wii, campbellbarton
Maniphest Tasks: T79785
Differential Revision: https://developer.blender.org/D8587
This object operator exits and frees the edit data of the
current object and enters the same mode in another one in a single step,
without going through object mode or keeping multiple edit object data
active. It is assigned to the D key.
This solves all conflicts that the right/click select keymap and the
emulate 3 button mouse produces for this operation and it is independent
of the state of Lock object modes.
Also, as the SculptSession is freed, when using Multires objects go
back to their preview resolution level, so it is possible to work on
high vertex count scenes without slowing down the viewport and other
performance problems.
Reviewed By: #user_interface, pablovazquez
Differential Revision: https://developer.blender.org/D7510
This removes the limitation of the sculpt overlays not being visible
with modifiers active.
Reviewed By: fclem
Maniphest Tasks: T68900
Differential Revision: https://developer.blender.org/D8673
This implements a new overlay that blends the bakground color over the
objects that are not in the same mode as the active object, making
them fade with the background.
This is especially needed for sculpt mode as there is no other overlay
or indication in the viewport to display which object is active.
This is intended to be used with D7510 in order to have a faster
workflow when sculpting models with multiple objects.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D8679
This adds an option for the HDRI rotation to follow the view rotation.
When this option is enabled, this allows EEVEE materials to be used as
matcaps for sculpting and painting.
This has an extra performance cost when orbiting around the model as the
lookdev cache needs to be recalculated, but in my test it is barely
noticeable.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D8566
This filter scales the mesh as it was a softbody, producing folds in the
surface. The orientation of the folds can be controlled using the filter
axis and orientation.
This is an example of a cloth filter that uses deform coordinates instead
of forces, but probably it does not make much sense to expose it to the
user in a different way and with different parameters. I'll remove
FilterCache->enabled_force_axis in a later commit and use always
enabled_axis in SCULPT_filter_zero_disabled_axis_components
for both forces and deformation filters, so this function can also be used
in the mesh filter.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8661
The deformation constraints strength were too strong and they were
preventing the cloth effects of the brushes with cloth deformation target
to create folds properly. This lowers the default, making the simulation
follow the deformation in a more relaxed way.
I'll make a separate patch to expose this as a property for certain brushes
and cloth deformers that may need higher values (like boundary with loop
falloff on a low poly mesh), but I think this default will work better for
most use cases.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8884
This new feature allows to use the strokes as an eraser of any stroke below. This is very handy to open holes in filled areas.
After running some tests, we have decided to keep the additive effect of the holdout color. To get clean holdout areas, just move the color to black to remove any additive effect. To have additive effect can be used in situations like tint slightly a transparent window with blue to simulate the glass.
See T79878 for more details
Differential Revision: https://developer.blender.org/D8932
This was a bug in OpenImageDenoise, upgrade to latest 1.2.3 which has the fix.
This in turn required a newer ispc version.
Differential Revision: https://developer.blender.org/D8892
Steps to reproduce were:
* Create a marker in the timeline
* With the mouse over the marker region, press Shift+D
The function for moving markers was reused and had handling specific to
tweak events. This is not relevant in case of duplicating markers.
When repeat image was active the image was drawn in the foreground
making most uv overlays not visible. This change creates a shared
defined value for repeating and not repeating images.
Ref {D8855}
Unix and Apple platform files use find_package(OpenSubdiv) which sets
`OPENSUBDIV_INCLUDE_DIR` as an advanced variable, as well as
`OPENSUBDIV_INCLUDE_DIRS` which should be used usually.
Windows sets `OPENSUBDIV_INCLUDE_DIR` which is used by the rest
of the code.
This patch renames it to `_DIRS` everywhere, for it to be like other
similar variables.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8917
situations
In the situation that the PTCacheEdit is not available (e.g. when
editing unbaked Cloth or Softbody caches - or, as in the report, being
in Cloth or Softbody Editing Type for Hair particles), accesing the
corresponding ParticleSystem or ParticleSystemModifierData would crash.
Now access these later (after PE_start_edit had the chance to return
early on this non-valid situation).
Reviewers: JacquesLucke
Maniphest Tasks: T80900
Differential Revision: https://developer.blender.org/D8941
Was missing a dedicated entry for LMB select, this is to be consistent
with how it is done for meshes.
Maniphest Tasks: T80905
Differential Revision: https://developer.blender.org/D8935
Caused by rB9a7f5f1bb422.
If using Auto IK (or targetless IK and Auto IK together), two temporary
constraints were added.
- from pose_grab_with_ik_add (even for targetless IK)
- from add_pose_transdata (even for Auto IK)
Since both both do similar things, but cannot work in tandem (with
possibly different chainlengths for example), we have to decide which
type to prefer over the other (as in: do not create a constraint for the
other).
It seems better to ignore the 'Auto IK' option on bones that will
have targetless IK set up for them specificallly [e.g. defining special
chainlength]. This way you can still work with 'Auto IK' ON generally
[with interactive chainlength control], but also have specific bones that
need their own custom chainlength.
For now, the most straightforward fix is to
- only add constraints for Auto IK from pose_grab_with_ik_add()
- only add constraints for targetless IK from add_pose_transdata()
Note: this area has some potential for later refactoring:
- move creation of all temporary constraints to a single place
[preferably pose_grab_with_ik_add]
- use only those temporary constraints in transform code [atm. we still
flip CONSTRAINT_IK_AUTO around on the "original" -- unneccesarily, after
rB9a7f5f1bb422 a dedicated temporary constraint is now always available]
- clarify CONSTRAINT_IK_AUTO vs. CONSTRAINT_IK_TEMP
- obeying standard rotation locks on bones in the chain (not just the
the IK locks) is not consistent between targetless IK and Auto IK
Potential candidate for 2.90.1 as well as 2.83 LTS
Maniphest Tasks: T80437
Differential Revision: https://developer.blender.org/D8930
Allows to more easily access time information about how long Cycles
did spend synchronizing objects from evaluated depsgraph on Blender
side to its own structures.
This timer does not include time spent evaluating render depsgraph.
Regression from {b248ec97769f}. A new parameter was introduced, but the
stub shader macros still had the old number of parametes. This
change adds a new dummy parameter to the stub macros.
mode
The transform convert of type TC_POSE was not being defined if the mode
was OB_MODE_WEIGHT_GPENCIL.
Maniphest Tasks: T80904
Differential Revision: https://developer.blender.org/D8934
Assigning window variables relied on notifiers that always used the
active window, no matter the window being assigned.
Pass the current window to the notifier.
This code had grown overly complicated and hard to understand.
The improvements in this commit:
- Avoid allocating a duplicate of every active panel.
- Instead of complicated logic to calculate each panel's offset,
just keep track of the current offset while iterating through.
- More readable code structure, better comments.
Note that calcuting the X offset here is a relic from pre-2.5 when
panels could be aligned horizontally. I kept this in, but it would
be reasonable to remove it in the future.
This makes these variable names more consistent with current standards,
mostly by not over-abbreviating already short words. The following commit
will refactor this function.
When entering scultp mode the visibility from the Face Sets is copied to
the base mesh. This steps was considering that if a vertex belongs to a
face with a visibible Face Set ID, it should be visible. As loose
geometry may not have any faces, those vertex were set to hidden.
Now this function check if a vertex visibility should be modified by the
face sets (by checking the loops), avoiding modifying the visibility of
loose geometry unintentionally.
Reviewed By: sergey
Maniphest Tasks: T80771
Differential Revision: https://developer.blender.org/D8899
Brushes that target the cloth simulation but are not the cloth brush
affect the entire mesh, so they don't have simulation areas and falloff.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8885
Just converts verts to points and vice versa.
Materials and Attribute layers are preserved (so for example if you set
custom radii on the pointcloud, convert to mesh, then convert back to
pointcloud, this will be preserved).
Also not add a Radius layer by default (it is still added and
filled when adding a pointcloud object from the menu), a global Radius
property that will be used if there is no radius attribute can be added
later. A Radius attribute can also be added in the pointcloud data
properties (and filled via python).
This will also add a new utility function that copies materials between
datablocks: BKE_id_materials_copy
ref T75717
Differential Revision: https://developer.blender.org/D7391
Following rB7a0a60dde8b4, checking for temporary IK constraints in
uiTemplateConstraintHeader is not needed anymore (since the whole panel
will now be skipped earlier for those).
Differential Revision: https://developer.blender.org/D8902
(e.g. cannot be animated)
An RNA path is mandatory for RNA_path_from_ID_to_property, and for
EffectorWeights, this has to be provided using RNA_def_struct_path_func
(since this struct is shared across ParticleSettings, Modifiers and Rigid
Body World). Without this, the animation system cannot work and e.g.
keyframes cannot be inserted.
The case for Rigid Body World in rna_EffectorWeight_path was missing,
now added.
Rigid Body World Field Weights are capable of being animated, tested
with file from T80131 (e.g. gravity, wind).
Maniphest Tasks: T80131
Differential Revision: https://developer.blender.org/D8713
The `find_package()` callers expect the library name as `Potrace`, not
`POTRACE`.
Reviewed By: LazyDodo
Differential Revision: https://developer.blender.org/D8923
rBf2d26409e83b fixed a serious problem with invalid mesh after an
operation with the extrude manifold.
Since BKE_mesh_validate_arrays is a slow operation, the chosen
interval between versions is relatively small and also only the
mentioned invalid mesh problem is tested.
Differential Revision: https://developer.blender.org/D8898
The ffmpeg, guardedalloc and blenlib are quite isolated and putting them in
their own executable separate from blender_test is faster for development than
linking the entire blender_tests executable.
For Cycles, this also bundles all the unit tests into one executable.
Ref T79958
Differential Revision: https://developer.blender.org/D8714
Bump Blender subversion from 4 to 5, and re-execute some versioning code.
Because of a mistake in the versioning code (corrected in rB1a4fc6dcd67b),
some of the versioning code didn't run in certain cases. This subversion
bump ensures that this code is still run.
This solves annoyance that the official RPM repository of nasm requires
newer version of rpm tool compared to what is shipped by default with
centOS 7.
Differential Revision: https://developer.blender.org/D8905
Using context overrides in Python caused problems for any operator that
changed the context and require these changes to be read back.
CTX_wm_area_set() for e.g. would set the struct member but future
calls to CTX_wm_area() would still return the value defined by Python
callers context overrides.
This also resolves a mismatch between polling and calling operators
from Python, where poll would override the Python context where calling
only overrode the context when a new context was passed in.
While this isn't an issue with the default configuration it's possible
to register extra header types for a single region.
In this case the first header-type to successfully poll is drawn
without drawing other header types.
This issue was raised by T60195.
This adds support for the same custom bevel profile widget used in
the bevel tool and modifier to the geometry generation for curves.
This is expecially useful for text and 2D curves with extrusion, as
it works much better than a weld & bevel modifier combination.
It can also be useful for adding quick detail to pipe-like objects.
The curve holds the CurveProfile struct and a new "Bevel Mode"
property decides which type of bevel to build, round, object, or
custom profile.
Although curves can already use another curve to make the bevel
geometry, this is a quicker way, and it also defines the profile of
just one corner of the bevel, so it isn't redundant. It's also nice
to have the same custom profile functionality wherever there is bevel.
Differential Revision: https://developer.blender.org/D8402
There is no ideal solution here, but we can assume by default that we should
use the Alpha output from a texture used for transparency data.
This will break people using a dedicated B&W texture for this alpha
pass, but we cannot really handle all cases properly in this wrapper, we
only try to support the most common ones to some extent.
There must not be any return directly in our versioning patches. It
would return from the entire versioning function.
Mistake in da95d1d851.
As a result, when opening old files with animation data, the versioning
for the new collection color tagging wouldn't run, and all collections
would get the first color assigned.
Adds an optional slider to the action constraint so that it can be
driven without a constraint target.
This is very helpful for more complex rigging and mechanical rigs, as it
means the action constraint can be controlled with a driver/custom
property directly, currently if we want to use a driver to control it we
must add a "dummy" bone/object inbetween to act as a control.
Reviewed By: Sebastian Parborg, Sybren A. Stüvel, Demeter Dzadik, Julian Eisel
Differential Revision: http://developer.blender.org/D8022
The output layout was wrong and it's a mistery why it works on most
implementations since it's clearly a wrong usage.
Thanks @sebbas for helping narrowing down the issue.
Since this buffer is used as an array of 12 32bits integers, and C++
string expect a NULL-terminated C-string, we need an extra char to
ensure last one is always NULL.
See D8906. Thanks to @brecht for noting this one too.
Currently, it's difficult to use the NLA system for users who are only
interested in using it as animation layers.
Entering tweak mode hides strips which are not evaluated. If the user
wanted to edit a different strip, they must exit tweak mode, look for
the strip, select it then re-enter tweak mode.
Solution:
All strips are always shown. The user can now see the next strip they
want to start editing.
Reviewed By: Sybren, Sebastian Parborg
Differential Revision: http://developer.blender.org/D7600
Since this buffer is used as an array of 12 32bits integers, and C++
`string` expect a NULL-terminated C-string, we need an extra char to
ensure last one is always NULL.
See D8906. Found while investigating T80657.
Previously, it was kind of a mess. In different places it was using `char`, `short` and `int`.
The changed properties are flags that are operated upon using bit operations. Therefore, the integer type should be unsigned. Since we only use 2 bits of these flags, `uint8_t` is large enough.
Especially note the change I had to make in `RNA_define.h` to make this work.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D8844
When Showing Meta data for an image where the buffer does not exist
(missing file) it crashed. This patch removes the check on the image and
only checks the availability of the buffer.
CustomData_blend_write_prepare might modify the `CustomData`
instance, making it invalid afterwards. It is not necessary to do this
in other cases explicitly, because when writing shallow copies of
ID data blocks are made.
This commit makes grid theming more consistent and capable by adding
some new theme colors related to grid rendering.
- Add grid theme color for node editor. `UI_view2d_multi_grid_draw`
is called with TH_GRID instead of a shaded `TH_BACK`.
Also color-blend `TH_NODE_GROUP`.
- Make the movie clip editor's clip preview grid respect grid theme
color (`ED_region_grid_draw` uses color-blended `TH_GRID`).
- Add versioning code to allow fixing existing themes (the resulting
themes should visually look the same as before)
These changes did cause some inconsistencies in the movie clip editor,
even after adjusting the themes accordingly:
1. The alpha slider of the grid color affects the background and not
the grid lines themselves.
2. The grids used by graph and dopesheet mode could already be themed
in the past. Now that the clip preview's grid can also be themed,
two different modes share the same theme color.
Differential Revision: https://developer.blender.org/D8699
This adds an operator to allow drag and drop of modifiers, constraints,
and shader effects within the outliner. Referred to as "data stack" in
the code for simplicity.
The following operations are allowed:
* Reordering within an object or bone
* Copying a single modifier/constraint/effect to another object or bone
* Copying (linking) all modifiers/constraints/effects to another object
or bone.
This complements the recent work done for panel-based modifier layouts
by allowing reordering in the outliner. It also makes it simple to copy
a single modifier/constraint/effect to another object.
Differential Revision: https://developer.blender.org/D8642
Adds functions to copy a modifier between objects, and an ED_ level
function for linking modifiers between objects. This will be used in
outliner modifier drag and drop.
These functions support both regular and grease pencil modifiers.
Differential Revision: https://developer.blender.org/D8642
Add functions to copy a single constraint between objects or between
bones, and another function to link constraints. This is in preparation
for constraint drag and drop in the outliner.
Differential Revision: https://developer.blender.org/D8642
Move the notifiers and DEG tagging to the ED_* level functions for
modifiers and gpencil shaderfx in preparation for outliner modifier and
shaderfx drag and drop. No functional changes.
Differential Revision: https://developer.blender.org/D8642
No functional changes. Move the constraint reordering logic into an ED_
level function to be used by outliner constraint drag and drop.
Differential Revision: https://developer.blender.org/D8642
Adds two functions: one to copy a shaderfx between two gpencil objects,
and another to link all shaderfx between two gpencil objects. Added in
preparation for outliner shaderfx drag and drop.
Differential Revision: https://developer.blender.org/D8642
No functional changes. Split the grease pencil and object copy logic
into separate functions. This makes the code cleaner and prepares
utility functions for outliner modiifier drag and drop.
Differential Revision: https://developer.blender.org/D8642
Stack panels (for modifiers, etc..) also get their expansion from their
associated list data. This means that property search expansion needs
to properly update the list data, which can be accomplished by calling
`set_panels_list_data_expand_flag`.
This commit also moves this logic to `UI_panels_end`, where it fits
better.
While testing for {rB40dcf686f04f}, compiler flags got mixed up and
non-working ASan configuration was committed.
Platform file, which is `include`d after the `CMAKE_C_FLAGS_DEBUG` etc.,
are set, overwrites those flags instead of appending to them. To fix this,
`PLATFORM_CFLAGS` is used to pass the `-fsanitize=*` flags to the C/C++
compiler.
Tested on fresh build using both Xcode and Ninja, with & without ccache.
Also silence a clang warning for multi-config generators:
the object size sanitizer has no effect at -O0, but is explicitly
enabled: -fsanitize=object-size [-Winvalid-command-line-argument]
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8879
The change builds GMP with `--with-pic` flag on non-arm architecture.
The warning:
ld: warning: PIE disabled. Absolute addressing
(perhaps -mdynamic-no-pic) not allowed in code signed PIE, but used in
___gmpn_divexact_1 from lib/darwin/gmp/lib/libgmp.a(dive_1.o). To fix
this warning, don't compile with -mdynamic-no-pic or link with
-Wl,-no_pie
Reviewed By: sebbas
Differential Revision: https://developer.blender.org/D8823
For work the GP team plans to land soon (T79877) potrace was taken
on as an additional optional dependency.
This diff adds building the library to the deps builder and takes
care of the integration into the build-system with the `WITH_POTRACE`
cmake switch.
Differential Revision: https://developer.blender.org/D8662
Reviewed by: brecht, sergey
Adds a new hierarchy line that draws to the left of collections. If the
collection is color tagged, then the hierarchy line is drawn in that
color. This is useful to see the color tag of a collection that exceeds
the vertical height of the outliner when expanded.
This also modifies the object hierarchy line drawing to match the new
collection hierarchy line, with no horizontal lines, and moved a unit to
the left. Object lines are not drawn colored.
Manifest Task: https://developer.blender.org/T77777
Differential Revision: https://developer.blender.org/D8622
This adds color tagging to collections. There are 8 color
options which are themable in the user preferences, with an additional
option for no color tag by default.
This adds a new filled collection icon and 8 colored variants of the
icon that can be themed in the user preferences.
In this commit the only interface to setting the color tags is through
Python, and there is nowhere in the interface where the collections are
shown colored. Setting and viewing the color tags from the outliner will
follow.
Manifest Task: https://developer.blender.org/T77777
Differential Revision: https://developer.blender.org/D8622
All the changes made in the branch `soc-2020-fluid-tools` are included in this patch.
**Major changes:**
=== Viewport Display ===
- //Raw voxel display// or //closest (nearest-neighbor)// interpolation for displaying the underlying voxel data of the simulation grids more clearly.
- An option to display //gridlines// when the slicing method is //single//.
==== Grid Display ====
- Visualization for flags, pressure and level-set representation grids with a fixed color coding based on Manta GUI.
==== Vector Display ====
- //**M**arker **A**nd **C**ell// grid visualization options for vector grids like velocity or external forces.
- Made vector display options available for external forces.
==== Coloring options for //gridlines// ====
- Range highlighting and cell filtering options for displaying the simulation grid data more precisely.
- Color gridlines with flags.
- Also, made slicing and interpolation options available for Volume Object.
Reviewed By: JacquesLucke, sebbas
Differential Revision: https://developer.blender.org/D8705
`ctrl-F` to start the search is obviously necessary, but the clear
operator, `alt-F` requires some of explanation. First, it maps nicely
to the paradigm of "key to set, alt-key to clear," which makes it
unobtrusive. Second, it can be a quicker way to clear the search than
moving the mouse to the top. Finally, in the future, it could a reset
the panels to their expansion before the search started.
Differential Revision: https://developer.blender.org/D8857
This adds a search bar to the properties editor. The full search for
every tab isn't included in this patch, but the interaction with
panels, searching behavior, UI, region level, and DNA changes are
included here.
The block-level search works by iterating over the block's button
groups and checking whether they match the search. If they do, they
are tagged with a flag, and the block's panel is tagged too. For
every update (text edit), the panel's expansion is set to whether
the panel has a result or not. The search also checks for matching
strings inside enums and in panel labels.
One complication to this that isn't immediately apparent is that
closed panel's subpanels have to be searched too. This adds some
complexity to the area-level panel layout code.
Possible Future Improvements:
- Use the new fuzzy search in BLI
- Reset panels to their expansion before the search started if
the user escape out of the text box.
- Open all child panels of a panel with expansion.
Differential Revision: https://developer.blender.org/D8856
Those constraints are added when using AutoIK (or targetless IK as
well).
While not strictly incorrect, these kinds of constraints were not
showing in the UI prior to rBeaa44afe703e (and I think they should not).
ref T80437
Maniphest Tasks: T80437
Differential Revision: https://developer.blender.org/D8895
Caused by rBe490dc4346db: UI: Skip unnecessary cursor setting
Above commit returned early if the cursor was already set, but did this
before visibility was regained, now return (still early) after setting
visibility.
Reviewed by @Severin in T80333
We will use a highlight on panel headers to convey that they have
a search match, so this commit initializes the theme color for the
properties editor.
Differential Revision: https://developer.blender.org/D8854
The context path "breadcrumbs" used to be in a panel in 2.79.
Although they look a bit better in the header, there isn't enough
space for them with the property search field in the header as well.
Maybe there will be another solution in the long term to fit both
the search field and this panel in the header, but for now, this
commit moves these labels back to a header-less panel.
Differential Revision: https://developer.blender.org/D8853
This is needed for property search (upcoming patch D8856) where a
buttons labels are often separate buttons, but we need to highlight
the label to show that a property is a search result. This is
especially important in "property split" layouts where the label is
almost always another button in a separate column.
The button groups here are basically a flattened view of the buttons
in the layout tree. Every function that adds a new set of buttons
creates a new button group, and the new buttons are automatically
added to the most recent group. Then, each group is searched
separately in the property search phase. It's important that every
function adding a new button set calls layout_root_new_button_group.
Note that this won't be disabled when property search isn't active.
It may be useful for other things in the future, and trying to pass
that information to layout functions didn't feel worth it to me.
Differential Revision: https://developer.blender.org/D8783
The UV/Image editor was doing interpolation including over the alpha
value what makes will render incorrectly when interpolating between pure
emissive colors and pre multiplied colors. This change disabled the
interpolation.
Add an option to only draw icons for operator_enum menus. This is used
for drawing inline icon buttons in the outliner context menu for
collection color tagging.
Part of T77408
Differential Revision: https://developer.blender.org/D8880
This adds support for drawing icon buttons as a row in menus. This is
needed for drawing collection color tagging icons in the outliner
context menu in T77777.
Part of T77408
Differential Revision: https://developer.blender.org/D8317
Commit 009971ba7a changed it so Cycles creates a separate
Embree device for each Cycles device, but missed the multi-device case. A multi-device with
Embree BVH can occur when CPU rendering is used with OptiX denoising and BVH creation then
failed to get a valid pointer to the Embree device, which crashed. This fixes that by providing the
correct device pointer in the multi-device case as well.
Relax limits of FCurve Bézier handles during evaluation. FCurve handles
can be scaled down to avoid the curve looping backward in time. This
scaling was done correctly but over-carefully, posing unnecessary
limitations on the possible slope of FCurves. This commit changes the
scaling approach such that the FCurve can become near-vertical.
Bump Blender's subversion from 291.0.1 to 291.0.2 to ensure that older
animation files are correctly updated.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D8752
A bit of versioning code was not part of the "Versioning code until next
subversion bump goes here" block, making the diff of an upcoming bump
harder to read. This commit just moves the code to the appropriate spot.
No functional changes.
Copy correct time to temporary strips used for evaluation of NLA
Transition strips.
When a transition is placed next to a meta strip, the transition would
use the wrong strip time, using the time of the meta strip instead of
its own.
Reviewed by: sybren
Differential Revision: https://developer.blender.org/D8287
There are some areas that don't handle pure emissive colors well. For
example erasing alpha using 2d or 3d painting. Or blurring an image in
the compositor.
This patch makes the rendering of pure emissive colors optional. In the
side panel of the Image editor it can still be enabled when needed.
There currently isn't a better place to store it as it is related on how
the image (or a layer of the image) is created. A future design needs to
make sure that the full workflow is supported.
The ED_region_panels_layout_ex function was quite long, so separating
some pieces of it can make it easier to understand and more modular.
Additionally, the parts that were split off can be reused for future
property search code.
On MacOS + Intel Iris Graphics 6100 (may affect other config too), the
texelFetch operation bypass the base mip setting of the texture object.
Using textureLod with lod = 0.0 ensure the lowest (after clamping) mip will
always be selected.
Also disable the texture filtering for this sampler to avoid unecessary
fetches.
This should fix T78653 Blender 2.83 broken Depth of Field in Viewport
Remove the condition preventing orientation from being obtained out of
the 3d View context.
Also pass the `ob` and `obedit` arguments obtained from the caller.
This commit adds a label on top of the bake operator in modular bake mode. This way users will immediately see if their current settings will allow them to bake noise, meshes or particles after baking the simulation base.
It was possible to drop `nasm` from the list of required macOS dependencies. However, `pkg-config` had to be added - it was required before but probably no one noticed this.
In order to build `external_clang` successfully, `external_xml2` had to be added to the clang dependencies (`c-index-test` was failing).
Note: On Linux `make deps` still seems to require `nasm` installed via apt.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8870
Debug groups makes it easier to view from where an error comes from.
The backend can also implement its own callback to make it easier to
follow the API call structure in frame debuggers.
The instance offset should be applied before scaling.
This way the scaling is done from the "collection origin".
Reviewers: zeddb, brecht
Differential Revision: https://developer.blender.org/D8889
The bounding box is not updated in the original object when the function is called using evaluated object and keeps wrong while the object is not edited or the file saved.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D8565
Notes: Minor changes done in the patch following review comments.
During undo/redo read code is expected to clear the `OB_MODE_EDIT`
bitflag of `Object.mode`, for some reasons.
This was not done anymore for re-used Objects, we need to add a special
handling case for that too.
Should be backported to 2.90 and 2.83 (will probably not be straight
forward for the latter).
Oversight in 411c5238a2 ignored sticky selection.
Use 'uvedit_edge_select_set_with_sticky' to make sure
sticky options are respected.
Also skip checking the existing selection since that only checks the
current UV, not all connected UV's which is needed for sticky selection.
The extra checks to avoid updating UV's isn't such an advantage as
only meshed in the selected region are tagged for updating.
Write custom properties (aka ID properties) to Alembic, to the
`.userProperties` compound property.
Manifest Task: https://developer.blender.org/T50725
Scalar properties (so single-value/non-array properties) are written as
single-element array properties to Alembic. This is also what's done by
Houdini and Maya exporters, so it seems to be the standard way of doing
things. It also simplifies the implementation.
Two-dimensional arrays are flattened by concatenating all the numbers
into a single array. This is because ID properties have a limited type
system. This means that a 3x3 "matrix" could just as well be a list of
three 3D vectors.
Alembic has two container properties to store custom data:
- `.userProperties`, which is meant for properties that aren't
necessarily understood by other software packages, and
- `.arbGeomParams`, which can contain the same kind of data as
`.userProperties`, but can also specify that these vary per face of a
mesh. This property is mostly intended for renderers.
Most industry packages write their custom data to `.arbGeomParams`.
However, given their goals I feel that `.userProperties` is the more
appropriate one for Blender's ID Properties.
The code is a bit more involved than I would have liked. An
`ABCAbstractWriter` has a `uniqueptr` to its `CustomPropertiesExporter`,
but the `CustomPropertiesExporter` also has a pointer back to its owning
`ABCAbstractWriter`. It's the latter pointer that I'm not too happy
with, but it has a reason. Getting the aforementioned `.userProperties`
from the Alembic library will automatically create it if it doesn't
exist already. If it's not used to actually add custom properties to, it
will crash the Alembic CLI tools (and maybe others too). This is what
the pointer back to the `ABCAbstractWriter` is used for: to get the
`.userProperties` at the last moment, when it's 100% sure at least one
custom property will be written.
Differential Revision: https://developer.blender.org/D8869
Reviewed by: sergey, dbystedt
Especially with new undo/redo it is even less recommended to perform
complex operations in those callbacks, they should remain as fast and
localized as possible.
Also updated the section about undo/redo a bit.
RNA diffing code was not dealing properly valid NULL PointerRNA (like
the empty texture slots of a ParticleSettings e.g., which were cause of
crash in that report).
To be backported to 2.90 and 2.83.
Running `bpy.ops.script.reload()` from Python was crashing
since the operator being called was it's self freed.
Change the reload operator to defer execution - as supporting
re-registration during execution is quite involved for a corner-case.
Tiled texture uses different texture structure than normal textures.
Normally we add dummy textures and use them, but I found it cleaner to
have 2 shaders and use the correct shader.
Hiding a collection should hide all children objects even when we are in Local
view with one of them.
Note from reviewer: We are doing this already for local collections. So
may as well do it when hiding the collections for the entire view layer.
Developer details: In function "BKE_object_is_visible_in_viewport" object flag
BASE_VISIBLE_VIEWLAYER wasn't being checked when we were in Local view,
It's now changed so that it's checked even if we are in Local view.
And this function was called by some viewport draw functions to check if it
should draw an object or not.
Maniphest Tasks: T72584
Differential Revision: https://developer.blender.org/D7894
This was caused by a left over DRWPass->state modification
that made the subsequent samples redraw without Blending enabled.
This led to incorrect blending.
The fix is to use the new API for pass instancing.
Also added code so that exact solver does the whole collection at once.
This patch allows users to use a collection (as an alternative to Object)
for the boolean modifier operand, and therefore get rid of a long modifier stack.
Entering edit-mode after creating shape keys on a blank mesh would crash.
Regression in 9b9f84b317 which prevented initializing empty
shape keys when there is no shape key offset data available.
Printing an evaluated view layer would show:
Evaluated Scene 'Scene'
- Now __repr__ uses the __str__ fallback for evaluated data,
as done in other situations where we can't create a string that
would evaluate to the data.
- __str__ now shows when the data is evaluated.
- __str__ always includes the memory address
(which was previously only shown for structs without a name).
This was caused by a missing state apply.
We force the GPUState to be set after the callbacks to avoid
desync between our state tracker and the real gl state.
This fixes some issues but a better general fix for all BGL would
be better.
This fix T80297 2.91 texture alpha is not transparent
This wraps the functionality used to speedup EEVEE volumetrics.
This touches the rendering code of EEVEE as it should fix a mis-usage of
the GL barrier. The barrier changed type and location, removing an
unused barrier.
Bone.children_recursive would return edit-bones when in edit-mode
irrespective of the type of the bone.
Check the type of self instead of the existence of edit-bones.
This commit removes the custom callback that's currently used to set the
property editor's pinned data, replacing it with an operator. This means
"pin" button doesn't have to be defined in C.
Differential Revision: https://developer.blender.org/D8376
In a recent update to the fluids modifier (rB03c2439d96e8), I introduced a flush call that sets all grids to NULL if the frame is outside of the allowed frame range. This way, the texture creation function must also check if the data grid is NULL before trying to create a texture.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D8872
Set the inverse matrix when the Child Of constraint is created. This
prevents the bone/object from jumping away when the constraint is added,
improving usability.
Reviewed by: sybren
Differential Revision: https://developer.blender.org/D8851
Running add-objects operator without an active screen would crash
as CTX_data_edit_object would return NULL in this case.
This could happen when adding objects from frame-change handlers for e.g.
In the case of adding new objects there is no need for a context lookup,
pass this directly to ED_object_editmode_exit_ex.
Add a function HairKey.co_object_set() which can be used to modify hair
keys positions in a way that hair strands respects the new coordinates,
without doing extra trickery with edit mode toggle. The naming comes
from existing HairKey.co_object().
The usage is a bit tricky:
- The function is to be called on the hair key from an original object.
- The arguments are to be passed from evaluated object.
Basically:
hair_key_orig.co_object_set(object_eval, modifier_eval, particle_eval)
This is required because coordinate space conversion needs to know
evaluated state of the hair system in order to access hair space
matrix. It is a deliberate choice to not pass dependency graph and not
to do lookup of evaluated ID on every call of co_object_set() to keep
performance on a manageable levels.
One requirement is that the hair strands are to be calculated once, by,
for example, toggling particle edit mode. Without this there will be no
`particles` to access hair keys from in the original object.
Such functionality is something what got lost during 2.80 development
and is something what is needed here at the studio.
Below is the file with more complete example: convert strands from mesh
edges to actual particle system hair strands. The viewport refresh is
sometimes missing, and this does not seem to be related to this specific
change.
{F8858104}
Differential Revision: https://developer.blender.org/D8849
The old image editor has an option to enable the smooth wire drawing.
This option was stored per editor and disabled by default. This patch
connects the smooth wires in the UV/Image editor to `User Prefereces ->
Viewport -> Quality -> Smooth Wire [] Overlay`.
The old option is left in place and will be removed when the old image
editor drawing code will be removed before BCon 3.
This patch reverses use draw manager for image editor the
experimental feature. Now the new drawing is enabled by default.
Inside the experimental tab in the user preferences there is now an
option to revert back to the old drawing method.
Using this option we can easilly check if all drawing features have been
migrated over. The plan is to remove the legacy drawing before BCon 3.
This project moves the current UV/Image editor drawing to the draw manager.
Why would we do this:
**Performance**:
Current implementation would draw each texel per time. Multiple texels could be
drawn per pixel what would overwrite the previous result. You can notice this
when working with large textures. Repeat image drawing made this visible by
drawing for a small period of time and stop drawing the rest. Now the rendering
is fast and all repeated images are drawn.
**Alpha drawing**:
Current implementation would draw directly in display space. Giving incorrect
results when displaying alpha transparent images.
This addresses {T52680}, {T74709}, {T79518}
The image editor now can show emission only colors. See {D8234} for
examples.
**Current Limitations**
Using images that are larger than supported by your GPU are resized (eg larger
than 16000x16000 are resized to 8k). This leaves some blurring artifacts. It is
a low priority to add support back of displaying individual pixels of huge
images. There is a design task {T80113} with more detail.
**Implementation overview**
Introduced an Image Engine in the draw module. this engine is responsible for
drawing the texture in the main area of the UV/Image editor. The overlay engine
has a edit_uv overlay which is responsible to draw the UV's, shadows and
overlays specifically for the UV Image editor. The background + checker pattern
is drawn by the overlay_background.
The patch will allow us to share overlays between the 3d viewport and UV/Image
editor more easily. In most cases we just need to switch the `pos` with the `u`
attribute in the vertex shader.
The project can be activated in the user preferences as experimental features.
In a later commit this will be reversed.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D8234
This should improve the issue with Scrape accumulation in concave
surfaces. When the strength of the brush is higher, the area radius is
also bigger, so the scrape plane is more stable preventing it from
accumulating displacement in the same area.
The Scrape/Fill default presets are also updated to include this
functionality.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8821
When using the left and right arrows of the number button, the button
would seem to do nothing. That is because it modified a value smaller
than what is displayed. Show more precision so the button doesn't appear
broken.
There were some problems when converted several objects at the same time, especially with the material conversion. The problems were more visible when bake an animation with several objects at the same time.
* Now the layer name include the object name.
* Reorganize how the materials are generated including object name.
* Fix color not converted to sRGB.
* Avoid triangles when generate the stroke. This fix a draw manager issue and also add more geometry to use later.
* Code cleanup.
* Don't link against Mesa OpenGL software emulation libraries from the
lib folder, they are not intended to be used for building, only install.
* Don't use static OpenMP library by default, it's usually not built to
work in shared libraries.
* Disable jemalloc on all platforms, the reason it fails is not specific
to Linux.
Differential Revision: https://developer.blender.org/D8827
When using Windows Terminal the same control codes Linux
uses to colorize the text can be used. WT can be detected
by looking at the WT_SESSION environment variable.
Differential Revision: https://developer.blender.org/D8848
Reviewed by: campbellbarton
`use_color` was defaulted to 'on' and only turned off when it was
decided the terminal didn't support this. This was the wrong
way to go about things, since that test only ran for Linux/Mac other
operating systems would get color formatting regardless if they
supported it.
The new default is `off` until the platform specific code inside
`CLG_ctx_output_set` turns it on after running some sanity checks.
This fix was part of the review of D8848 but deserved its on commit
Reviewed By: campbellbarton
When creating the boundaries for the symmetry passess, it could happen
that a symmetrical vertex is not found inside the radius of the brush.
In that case, the function to initialize a new boundary was called with
index -1 (BOUNDARY_VERTEX_NONE), so this function should also check
that the initial vertex that is going to be used to find the boundary is
a valid index.
Reviewed By: sergey
Maniphest Tasks: T79754
Differential Revision: https://developer.blender.org/D8860
When opening the outliner context menu with multiple data types
selected, the menu did not show operators related to the target of the
cursor. For example, if a modifier and object are selected, a right
click on the modifier does not show the modifier options, rather it
shows the object context menu.
Now the data type of the right-click element is used to determine the
context menu to draw. For this to work properly the active element is
now set on right click.
Part of T77408
Manifest Task: https://developer.blender.org/T77770
Differential Revision: https://developer.blender.org/D8647
The outliner context menu has options to enter and exit edit mode, but
they only show in edit mode, and they don't work. This removes the
broken entries and related code.
Part of T77408
Differential Revision: https://developer.blender.org/D8641
Add a column of icons in the left gutter of the outliner for controlling
the interaction modes of objects. When an object is in a mode other than
object mode, the mode icon will draw to the left of that object. Any
other objects that are valid to be added or swapped into the mode are
drawn with a dot to the left of the object.
Clicking the dot to the left of an object will swap that object with the
current active object in the interaction mode. For edit and pose modes,
ctrl clicking the dot will add that object to the current mode.
Clicking the mode icon next to the active object removes it and all
other objects from the current mode.
The behavior is nearly identical to the previous edit/pose mode toggling
by selecting the mesh and armature datablocks, with additional support
for all interaction modes.
Currently two undo steps are pushed to prevent an assert.
Part of T77408
Manifest Task: https://developer.blender.org/T68498
Differential Revision: https://developer.blender.org/D8641
The Eraser Point mode was erasing too much points.
This eraser existed before the new Soft erasers were created and now it was working wrongly. The eraser point mode must remove the points below the eraser cursor at the first contact. For more soft erasers, the new Soft modes can be used.
This allows subsequent redraw to work just like before.
However a better safeguard system against setting the uniforms in the
wrong shader would be nice to have.
This prevents Blender from crashing when switching
to rendered view and the grid_data is NULL in the
lightcache (due to possible corruption), by switching
to the fallback lightcache. The fix extends the solution
for possible corruption in the cube_data as well.
Fix T79737
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D8835
This makes it possible to disable all the extensions when forcing
workarounds.
Also it will allow future options to selectively disable each extension
to know which one is buggy.
This is to improve debugging on older hardware that may not support
4.3 debug capabilities (like Macs).
This avoids sprinkling glGetErrors manually. This might still be needed
to find the root cause since not all functions are covered.
This overrides the functions pointers that GLEW have already init.
This is only enabled if using --debug-gpu option and the debug extension
are not available.
This also cleanup the usage of GLContext::debug_layer_support and use
wrapper to set object labels.
Modular caches for noise, particles and meshes require that additional data is baked (i.e. is resumable option). With this commit users will be explicitly asked to enable this option before being able to bake noise, particles or meshes.
This commit renames the Sequence Display Mode to Video Sequencer. THis
matches the editor name in the editor list.
This commit also adjusts the tooltip because the data show in this
dispay mode is not strickly speaking "data-blocks".
Ref D7716
This commit also changes the U shortcut to open the unwrap menu instead
of the Unwrap operator. The unwrap operator can now be accessed by
pressing U twice.
Note, these operators use the 3D Viewports selection and not the UV
Editor selection. In the future the operators should unwrap based on the
selection within that editor.
Fixes T80600
Differential Revision: https://developer.blender.org/D8834
Caused by own rB6dc7266cf1f4.
When overriding context for constraint operators (such as in constraint
tests), it could happen that context "active_pose_bone" is set, but
"pose_bone" isnt. Now check for both in ED_object_pose_constraint_list.
Load all grids when the grid display option is turned on. Otherwise, the grid from the viewport display options might not have been loaded from the cache.
It seems that using a vertex shader using both `gl_InstanceID` and
`gl_VertexID` is causing some issues on MacOS + Intel Iris.
Regression introduced by rB052538edc1fba109d3427471047611888ed13bea
The drawing of popus should be done with the window's default viewport
and scissor. Previous functions may change these, so they should be
explicitly reset.
There is a list of attributes, along with operators to add and remove
attributes. For adding, there are a few standard attributes that can be
added quickly, as well as a popup to create a custom attribute.
Ref T76659
Differential Revision: https://developer.blender.org/D8636
Instead of custom data layer with special types, using general Vector and Float
attributes.
Ref T76659
Differential Revision: https://developer.blender.org/D8635
This puts all generic float/int/vector/color/string geometry attributes in a new
.attributes property. For meshes it provides a more general API for existing
attributes, for point clouds attributes will be used as an essential part of
particle nodes.
This patch was implemented by @lichtwerk, with further changes by me. It's
still a work in progress, but posting here to show what is going on and for
early feedback.
Ref T76659
Differential Revision: https://developer.blender.org/D8200
The fix involves going over ALL the possible combinations of viewlayers
and viewports and re-sync.
I tested this with multiple windows, multiple scenes and multiple
viewlayers.
Since (for now?) the operation of syncing the local layer collections is
not too expensive, this is not so bad. In theory we could improve this
by checking if the collection the object was moved to and from is in the
scene before iterating over it. I don't think it is worthy though.
Thanks Arun Parolikkal for the initial attempt on D8342.
Final patch reviewed by Brecht Van Lommel.
This makes it error-proof to disable/enable experimental features
during the release cycles. Since it is handled by CMake it should always
work reliably now (not depending on someone turning this on and off).
Reviewed by Sergey Sharybin.
not active
Caused by {rB608d9b5aa1f1}
Prior to rB608d9b5aa1f1, the constraint was gotten using **context**
[CTX_data_pointer_get_type(C, "constraint", &RNA_Constraint) -- which is
valid for bones on hidden layers].
After rB608d9b5aa1f1, the constraint is found (or isnt) using
`edit_constraint_property_get` [this is **not** valid for bones on
hidden layers because internally `BKE_pose_channel_active` checks if the
bone is on an active layer].
Some observations:
- Every operator using `edit_constraint_property_get` doesnt work for
bones on inactive layers [delete, moveup, movedown, move to index (drag
n drop nowadays)]
-- moveup, movedown, move to index check if they could find a constraint
beforehand though (dont crash)
-- delete crashes (doesnt check if a constraint could actually be found)
- Every operator using `edit_constraint_property_get` for constraint
data doesnt work for bones on inactive layers [stretchto_reset,
limitdistance_reset, childof_set_inverse, ...]
-- these all check if they could find a constraint beforehand though
(dont crash)
This is because the poll function is using **context** to get the
constraint, the operators themselves use
**edit_constraint_property_get** which leads to inconsistent/unexpected
results.
Possible solutions were:
- [1] let the delete operator just work with the context constraint
again (like prior to rB608d9b5aa1f1) -- allows for deleting constraints
on bones in inactive layers
- [2] check if we could get a constraint -- prevents the crash, but does
**not** allow for deleting constraints on bones in inactive layers
- [3] make the poll `edit_constraint_poll_generic` be as strict as the
operators -- dont use **context** to get the constraint, but something
like **edit_constraint_property_get**
- [4] make the operators be more graceful and let them act on bones on
hidden layers -- let **edit_constraint_property_get** actually use the
same **context**
This patch implements [4], so poll an doperators are now in sync.
- prevents reported crash
- also enables operators for bone constraints on hidden layers
- also enables drag and drop reordering of constraints on hidden layers
This might be a candidate for 2.90.1? (if it is, take care to include
prior "Refactor getting constraints" refactoring commit)
Note: Adding constraints also doesnt work for bones on inactive layers
[that was the case in 2.79 as well -- it is also using
`BKE_pose_channel_active`]
Maniphest Tasks: T80464
Differential Revision: https://developer.blender.org/D8805
This is the refactoring part of D8805 (should be no functional changes).
- exposes pose-related part of former 'get_constraints()' from
interface_templates.c to new ED_object_pose_constraint_list
- rename ED_object_constraint_list_from_context -->
ED_object_constraint_active_list
Also clarify comments on both of these.
ref T80464
ref https://developer.blender.org/D8805
Blender does string based searching in many different places.
This patch updates four of these places to use the new string
search api in `BLI_string_search.h`.
In the future we probably want to update the other searches as well.
Reviewers: Severin, pablovazquez
Differential Revision: https://developer.blender.org/D8825
This adds a generic string search library in `BLI_string_search.h`.
The library has a simple to use C api that allows it's users to
filter and sort a set of possible search results based on some
query string.
Reviewers: Severin
Differential Revision: https://developer.blender.org/D8825
-1 is a valid value to pass as RNA float precision. We let the UI code
figure out an appropriate precision then. So don't fail the assert if
-1 is passed.
The point cache code needs a non NULL rbw pointer.
This could have been avoided if there was a sanity check in the convert
function, so added a check there as well.
On systems with 512kb stack this happened at around 13k points.
This happened at times with grease-pencil, although callers that
frequently use complex polygons should be using BLI_polyfill_calc_arena.
This reverts commit 637a5c964a.
I commited the previous commit because I wasn't building with openvdb.
Compiling with openvdb fix the clang-tidy errror.
This reverts commit f14d24729f.
I commited the previous commit because I wasn't building with openvdb.
Compiling with openvdb fix the clang-tidy errror.
This removes from the UI all tools with missing icons and hides them
under a "Tools with missing icons" experimental option.
We agree on not making available by default tools in master without icons.
Having this experimental flag will allow to commit new tools as soon as the
technical design and implementation is finished so development can
continue, without adding broken icons to the UI.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D8831
Add support for object data instancing. This is used when the objects
are instances, for example when duplicated by a particle system, or
instanced by the duplication system (collection-duplicating empties,
vertex/face duplis, etc.)
Since Alembic already deduplicates data, this doesn't make the resulting
Alembic files any smaller. They will be faster to write, though, when
there is a lot of instanced geometry, as the deduplication system won't
have to do any comparisons.
This instancing support is still limited, in the sense that only object
data is instanced and all transforms are still written explicitly. A
future improvement could be to support instancing entire collection
hierarchies.
Blender's Alembic importer has no understanding of these Alembic
instances yet, and will thus happily duplicate the data on import.
The USD Alembic plugin seems to have problems understanding the
instancing. There might also be other software with similar issues.
Because of this, instancing can be turned off in the exporter (it's on
by default).
* Match menu items with Add Menu (order and naming e.g. Font -> Text)
* Use Icons
* Remove ellipsis from the name (policy is to use `...` only when triggering a window/popup)
No functional changes.
Thanks @HooglyBoogly for the help!
Split `ABCHierarchyIterator::get_alembic_parent()` into two functions:
- For a given export path, find the Alembic object
- Ensure that that object is usable as parent object (Alembic uses a
specific 'top' object as parent to indicate "no parent").
The new function is `public` as it will be used in an upcoming feature,
and is required to be public then.
No functional changes.
Split the `ABCHierarchyIterator::create_data_writer()` function into two
functions. This is to prepare for the creation of writers not just by
object type, but also by goal, for example writers that reference other
Alembic data instead of writing their own (i.e. instancing).
No functional changes.
The draw manager test case initialized ghost, gpu and draw manager. This
change splits the base test case to GPU specific and draw manager
specific test case.
The GPU test base test case will be used for low level GPU tests.
Memory leak is introduced as test cases reinitializes the GPU stack.
Added a call to GPU_backend_exit to fix this.
In GPU_backend_exit the GPU backend was destroyed but the pointer wasn't
reset for reuse. This patch also clears the pointer to be reused.
Extract the mesh instancing code from the mesh writing function into a
generic 'mark as instance' function on the abstract USD writer. This will
help in supporting non-mesh instances.
No functional changes.
Refactor `ED_object_parent_set`:
- Mark parameters `ob` and `par` as `const` so that it's clear the
function doesn't assign any other value to them.
- Rename `pararm` to `is_armature_parent`; I mis-read it as `param` all
the time, and it was very confusing.
- Replace repeated `if-else` statements with `switch` statements.
- Reorder preconditions to have some simple checks first.
- Flip condition on a huge `if`-statement to return early and unindent
the remainder of the function.
This function still requires splitting up into smaller functions, but at
least this is a step forward.
No functional changes.
This patch supports instantiating object data on append/link,
reported as a bug T58304.
This is an option, available when linking/appending,
similar to the existing "Instance Collections" option.
Reviewed by @sybren
Ref D8792
Move arguments to BLO_library_link_{begin/named_part/end} into
a single parameter struct, to ensure arguments always match.
This allows is to skip tagging ID's LIB_TAG_DOIT when it's not needed,
previously it was always cleared just in case it was needed.
This also makes it possible to remove BLO_library_link_named_part_ex
which was only used when tagging was needed.
This makes the GPUContext follow the same naming convention as the rest
of the module.
Also add a static getter for extra bonus style (no need for casts):
- Context::get()
- GLContext::get()
- Use the syntactic wrap/unwrap method to make code more readable.
- Update comment about hidden struct behind opaque types.
- Cleanup GPUDrawList type.
This is part of the Vulkan task T68990.
This introduce a new GLQueryPool for managing queries in an
implementation agnostic manner.
This modify the GPU selection query to use this new object.
This also make use of blender::Vector for better code quality.
No real functionnal change.
This property was inadvertently removed from the modifier's panel and
it wasn't caught in time for the release of 2.90. Thanks to the user
"VermossomreV" for bringing this to my attention.
Differential Revision: https://developer.blender.org/D8790
Based on the original patch by Vaishnav S (@padthai), this adds
support for temperature units. Initially supported units are Celsius,
Kelvin, and Fahrenheit.
The units aren't used anywhere with this commit. Those changes should
happen in separate patches by adding PROP_TEMPERATURE to RNA property
definitions. But it should be ensured that the various solvers and
simulations actually properly use real units.
The complexity of some of the changes comes from the fact that these
units have offsets from each other as well as coefficients. This also
makes the implementation in the current unit system troublesome.
For example, entering 0C evaluates correctly to 273K, but 0C + 0C
doubles that result, because each unit value is evaluated separately.
This is quite hard to solve in the general case with Blender's current
unit system, though, so it is not handled in this commit.
Differential Revision: https://developer.blender.org/D4401
The current playback popover has some issues:
- Using labels instead of headers is inconsistent with
the rest of the interface
- Incomplete context and description for some properties
- Ugly large spacing
This commit fixes these problems by using headers.
Differential Revision: https://developer.blender.org/D8434
Every time CMake is re-run, Xcode shows a popup asking if
user wants to manage schemes automatically or manually.
Building Blender wiki page recommends managing schemes automatically.
This change sets the default behavior to "automatically" and generates
the .xcscheme files while CMake is running, instead of hogging Xcode
later on. With tests enabled, the number of schemes is 203.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8820
Similar to {rB0a5f7061369d53b4eac55362ad2}
but also for Xcode and Ninja multi-config.
This silences 44 pairs of warnings like:
/bin/rm -f build_full/bin/tests/BLI_ghash_performance_test
"build_full/CMakeScripts/XCODE_DEPEND_HELPER.make:42: warning:
ignoring old commands for target
`build_full/bin/tests/BLI_ghash_performance_test'"
/bin/rm -f build_full/bin/tests/BLI_ghash_performance_test
"build_full/CMakeScripts/XCODE_DEPEND_HELPER.make:3523: warning:
overriding commands for target
`build_full/bin/tests/BLI_ghash_performance_test'"
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8815
This change allows macOS developers to use
`WITH_COMPILER_ASAN` with every generator.
`CMAKE_C_IMPLICIT_LINK_DIRECTORIES` on macOS points to
`Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.14.sdk/usr/lib`
which is not where the Sanitizer libraries are.
To link the library, rpath could be used but that seems complex,
so linker flags are passed as the documentation says. [1]
If users have `ASAN_OPTIONS=detect_leaks=1` in their environment
variables, it should be removed to avoid a feature-unsupported error
while compiling.
[1]: http://clang.llvm.org/docs/AddressSanitizer.html#usage
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8817
With this option, self-intersections in either or both operands
will be handled properly (if both sides are piecewise winding
number constant, and maybe some other cases too).
In the Boolean tool, this flag was there already but the code
forced a unary operation in that case; this commit corrects it
to make a binary operation. This flag makes the code slower, which
is why it is an option and not an always-on thing.
This is part of the Vulkan task T68990.
This commits changes a few things:
- Rename extensions to capabilities (but left the file name untouched).
- Cubemap mip render workaround detection is rewritten using gl
commands to avoid using the GPU API before initialization.
- Put all the capabilities that are only relevant for the GL backend
inside GLContext as static variables.
- Cleanup the names of the limit variables.
- Separate all GL related workaround search inside the GL module.
Part of the vulkan implementation T68990.
Pretty straight forward. Just move the GL code inside the GLBackend and
make the GPUPlatformGlobal a class object.
Refactor the operator exec function into a few smaller functions. The exec
function was mixing up vertex-parent and non-vertex-parent code, including
incorrect comments.
No functional changes.
This implements Box Trim as a boolean based trimming too gesture in sculpt
mode. This is the intended way to remove parts of the sculpt instead of
using box mask and mask slice. It also creates new face sets for the new
faces created after the boolean operation.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8766
This was introduced in the first commit of the cloth brush. In order to
support the cloth brush deformations with subsurf modifiers, the sculpt
API was changed to return the deformed coordinates from the PBVH instead
of the mesh coordinates. When using grab active vertex and rendering the
original mesh wireframe it should render the undeformed mesh coordinates
when available.
Reviewed By: sergey
Maniphest Tasks: T79914
Differential Revision: https://developer.blender.org/D8630
Now when a mesh is partially hidden using Face Sets, the open boundary
the hidden geometry produces is also detected by the brush.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8819
This should be using the mesh_cd_ldata_get_from_mesh function in
order to get ldata from BMesh in edit mode.
Reviewed By: sergey
Maniphest Tasks: T78225
Differential Revision: https://developer.blender.org/D8818
The "Grab Active Vertex" in sculpt mode highlights the vertex and
the neighbor vertices. This was working wrong in the case when mesh
has multires modifier at sculpt level 0 and has shape keys.
The issue was caused by the wrong crazy space calculation, which was
ignoring subdivision level. This is an oversight from the initial
implementation: the modifier has no effect if the subdivision level
is 0.
Part of the Vulkan port T68990
This makes a few changes in how the data is being handled by the
backend to allow more flexibility in the future.
The overall code logic is left unchanged.
Looks like this has just not been implemented before.
Use the name matching method used in other Dope Sheet UI modes.
Maniphest Tasks: T80531
Differential Revision: https://developer.blender.org/D8824
This is part of the Vulkan backend task T68990.
There is no real change, only making some code re-organisation.
This also make the IndexBuf completely abstract from outside the
GPU module.
This allows orphan object data for example (meshes, curves, etc)
to be dropped into the 3D View from the outliner,
creating a new object instance.
Previously the only way to do this was to add the same type of object
then swap it's data through the ID selector drop-down.
Well, this only fixes the example if one uses the new Exact mode,
but since that is available, seems fair to call this fixed.
Since these were not closed-volume operands, the Exact mode needed
some adjustment to the threshold used for "inside-outside" tests
for the case of deciding if the cutter is inside the other shape
for a Difference.
The issue was that the screen geometry calculations scaled down the
areas, but the header would become too small. So it would be upscaled
again towards the lower screen edge (where the status-bar is at). Now we
do another pass over the geometry calculations, until all areas fit into
the screen, or until some rather arbitrary maximum is reached.
This fixes the issue for common cases. Extreme cases, with many
vertically stashed editors and a too small window to show all, are still
not too well supported. Blender keeps working but the status-bar is
still overlapped. We could deal with this better but what's there now
should be good enough.
These buffer detailed infos are not needed unless going deep into
perf. profiling, in which case you can still disable this compile option.
This makes user report log much more readable.
We cannot change the texture bind point since the interface count
4/5 textures to bind. Changing the uniform to avoid one bind
make the system thinks one texture is missing.
Avoid this by creating a dummy texture and binding it to the empty
slot.
This is to modernize the API:
- Add meaningful name to all textures (except DRW textures).
- Remove unused err_out argument: only used for offscreen python.
- Add mipmap count to creation functions for future changes.
- Clarify the data usage in creation functions.
This is a cleanup commit, there is no functional change.
# Conflicts:
# source/blender/gpu/GPU_texture.h
This is to have better error detection in debug builds.
This is not a replacement for a full check like in renderdoc but it
might catch some issues early on.
This is a massive cleanup needed for vulkan support T68990. It provides:
- More meaningful enums with conversion functions.
- Less hacky supports of arrays and cubemaps (all considered layered).
- More inline with the stateless design of vulkan and modern GL.
- Methods Fallbacks are using framebuffer functions that are wrapped
instead of implementing inside the texture module.
What is not in there:
- API change.
- Samplers support (breaks a few effects).
# Conflicts:
# source/blender/gpu/GPU_texture.h
This is in preparation of using it to clear single texture.
Also includes minor cleanups about not using tex target in
assert and adding enum operators.
This is going to be unecessary after the GPU opengl texture backend refactor.
For now add a save/restore mechanism to leave the state untouched.
Also remove some calls where the caller would bind to particular binding
point and set the shader uniform.
The code to detect non-trivial coplanar intersection sometimes
falsely said there wasn't one. This caused some coplanar intersections
to be missed. Also added a test for this case.
Caused by f04260d8c6.
Cycles' CMake defines macros with the same name as Blender, which
override the Blender ones. There's however a small difference in the
re-defined `remove_cc_flag()`, the Cycles version only takes one flag at
a time. So I guess Blender's calls to it would only result in the first
flag being removed.
Of course Cycles shouldn't override any Blender macros, but I'll leave
that up to Brecht to fix properly.
For the man rationale behind this design, see 49f088e2d0. Further,
this removes users of uiBut.a1/uiBut.a2, which is a very ugly design
choice (hard to reason about).
Note that I had to do rather ugly, specific exceptions for the number
buttons in `ui_def_but_rna()`. But once all users of a1/a2 are removed,
this special handling shouldn't be needed anymore.
I also had to move a sanity check out of the button definition. It's now
moved into a new debug only sanity checking function executed when
finishing the layout definition (block end).
* Support precompiled libraries on Linux
* Add license headers
* Refactoring to deduplicate code
Includes work by Ray Molenkamp and Grische for precompiled libraries.
Ref D8769
- Declare variables where they are initialized
- Use consistent variable and static function names
- Use helper functions more for common operations
- Remove use of BezTriple struct, use CurveProfilePoint instead
- Apply small simplifications to code in some situations
This replaces the switch case and operation types with a
SculptGestureOperation struct with callbacks.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8798
This replaces the switch case with function pointers to
extract masks or face sets.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8796
Sometimes interpolate all frames is not convenient and it's better, for example, interpolate in twos.
The new parameter allows to define the number of frame for each step, by default is set to 1 as before.
{F8812621}
This is a request of animators to improve interpolate tools.
Reviewed By: mendio
Maniphest Tasks: T80190
Differential Revision: https://developer.blender.org/D8723
239b0b
Remove redundantly nested `#if` and `#ifdef` statements.
One nested `#if 0` block was left untouched, as it's in particle code
that's no longer maintained. Furthermore, that block also has some
explanation as to the differences between the enabled & disabled parts.
One nested `#if 0` construct was completely removed, leaving only the
actually used bit of code. There was no explanation as to the usefulness
of the disabled code, and it hasn't been touched in years.
No functional changes.
With the 'Restrict' option, the gradient should be restricted to the
assigned vertex, just like the other weight paint tools.
Maniphest Tasks: T80273
Differential Revision: https://developer.blender.org/D8761
This was reported for the "Add Node" search functionality, but is
relevant in other searches as well.
So e.g. when searching for "Separate XYZ", typing "sep", then " " (with
the intention to type "X" next) would clear the search field. Now use
the same method (matching against all search words) as in F3 searching
('menu_search_update_fn') in other searches as well [searching IDs,
property objects, finding nodes,...]
This should give a much nicer search experience in general.
Note: this does not touch other searches in the Dopesheet, Outliner,
Filebrowser or User Preferences that have other search implementations.
Maniphest Tasks: T78084
Differential Revision: https://developer.blender.org/D8232
The "set_expand_from_list_data" function has to be called after updating
the panels' custom data pointers. Otherwise the wrong information is
retrieved in the best base and it will cause a crash in the worst case.
Changing the active object would change the mode, but the necessary
toolsystem update to change the cursor was not run.
Steps to recreate were:
* Duplicate default cube
* Enter sculpt mode with one of the cubes
* Disable Edit > Lock Object Modes
* Select back-and-forth between the objects
Same would happen with other modes.
CMake caches the location of the CRT runtime in the
MSVC_REDIST_DIR variable, and uses it to copy the required
dll's during the install phase.
This variable is only initialized when it does not exist.
Leading to issues when compiler updates are installed and
the compiler version slightly changes, cmake still looks
in the old location for the runtime and warns about the
files not existing.
This change fixes the issue by checking if the redist dir
exists and if not unsets it so InstallRequiredSystemLibraries
can have another go at figuring out where they live.
The current 1D Voronoi implementation for the Distance to Edge option
computes the distance to the cells instead. This patch fixes that and
compute the distance to the edge.
Reviewed By: JacquesLucke, brecht
Differential Revision: https://developer.blender.org/D8634
We do this in a couple of places, so it's worth having the logic wrapped
into a function.
Also, the only way to set the disabled hint for a button from outside of
`interface/` was through `UI_block_lock_set()`/`UI_block_lock_clear()`,
for which the usage isn't obvious when you just try to disable a single
button.
This reverts commit 17905e89a7.
Fix T80429: Transform Tools cannot be cancelled
rB17905e89 better filtered the key items that should appear in the
status bar.
But it is very restrictive since canceling is still possible in other
cases.
# Conflicts:
# source/blender/editors/transform/transform.c
This implements a Face Set Extract operator, which is similar to mask
extract. This operator uses a picker to select and Face Set in the mesh
and extract the geometry directly to a new object.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8599
We have established a convention of exposing the most important
settings from popovers, then aligning a popover to control more
detailed settings.
The file browser has powerful display / filtering settings, but
they're hidden in popovers at the moment, so it's sometimes a pain
to use them. The "display as" options are now exposed to the left of
the display settings popover, and the "filter" toggle is exposed to
the left of the filter settings popover. This convention is familiar
and intuitive for users and makes interaction faster.
Note that the "show hidden" item in the filter popover still has an
effect if filtering is disabled.
This commit also:
- Removes the icons in the "Sort By" enum
- Uses property split for the "Sort By" enum
- Very slightly increases the default width of the file browser
window to make room for the new buttons.
Differential Revision: https://developer.blender.org/D8719
This was doing a matrix inversion per vertex per stroke step and it was
unused.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8791
All brushes except for grab need delta for tip orientation in order to
work with anchored stroke, not only snake hook, which is the one that
needs it always.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8789
This implements the sculpt gesture lasso and box operators for face
sets. They work the same way as the mask gesture operator and tools.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8716
It was possible to increase the text size quite a lot, making text much
bigger than their containing widgets. These new limits makes the maximum
size of text be closer to the widget size.
Note that there needs to be some extra "wiggle room" since fonts may
have quite different glyph sizes. So you can still set the font size to
be slightly bigger than the widgets.
Addresses T80175 and T79059.
Some underlying functionality was not ready for greasepencil:
- BKE_modifiers_get_virtual_modifierlist (now introduce dedicated BKE_gpencil_modifiers_get_virtual_modifierlist)
- BKE_modifiers_is_deformed_by_armature
- checks in drawing code
- checks in (pose) selection code
A couple of changes to make this work:
- `eGpencilModifierType_Armature` has to be respected (not only `eModifierType_Armature`)
- `OB_MODE_WEIGHT_GPENCIL` has to be respected (not only `OB_MODE_WEIGHT_PAINT`) -- (now use new `OB_MODE_ALL_WEIGHT_PAINT`)
- `gpencil_weightmode_toggle_exec` now shares functionality from `wpaint_mode_toggle_exec` -- moved to new `ED_object_posemode_set_for_weight_paint`
This patch will also set the context member "weight_paint_object" for greasepencil (otherwise some appropriate pose operators wont work when in weightpaint mode)
Reviewed By: campbellbarton
Maniphest Tasks: T63125
Differential Revision: https://developer.blender.org/D8483
Condition was flipped, would allow actions on constraints coming from
library, but prevented actions on local constraints.
Mistake in rBS0b49fdd0ee0.
Maniphest Tasks: T80391
Differential Revision: https://developer.blender.org/D8793
This change doesn't impact release builds,
in general avoid having defaults depend on build options
since it means files from different builds won't match.
The Snake Hook deformation mode was using the same strength as grab (not
supporting pressure), but this deformation mode supports pressure.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8724
All filters were using prevclicx, which is in screen coordinates and
mval[0], which is in region coordinates to get the filter strength.
This fixes the issue in all filters.
Reviewed By: Severin
Maniphest Tasks: T80311
Differential Revision: https://developer.blender.org/D8776
For modifier shortcuts we added a "custom_data" field to panels.
This commit uses the same system for accessing the list data that
corresponds to each panel. This way the context is only used once
and the modifier for each panel can be accessed more easily later.
This ends up being mostly a cleanup commit with a few small changes
in interface_panel.c. The large changes in the UI functions are due
to the fact that the panel custom data is now passed around as a
single pointer instead of being created again for every panel.
The list_index variable in Panel.runtime is removed as it's now
unnecessary.
Differential Revision: https://developer.blender.org/D8559
Blender tried to free objects twice from the bullet world sometime.
First we would implicity remove all objects when recreating the bullet
world and then explicity try to remove them again from the now empty
world.
This would wouldn't crash older bullet versions, but the recent versions
will as we will try to free objects that no longer exists in the bullet
world.
Also clear the cache on deletion as the object order changes.
Fix T77181: The cache clearing will fix this issue.
Continuing the work from D8326, this commit adds a property split
layout to the add torus operator. It also puts the properties common
to all object add operators at the bottom for consistency.
Differential Revision: https://developer.blender.org/D8748
This change enables the developer option `WITH_CYCLES_NATIVE_ONLY`
for MSVC. This allows a developer to just build the cycles
CPU kernel for their specific system rather than all kernels,
speeding up development.
Other platforms have had this option for years, but MSVC lacks
the compiler switch to target the host architecture hence it
always build all kernels.
This change uses a small helper program to detect the required
flags.
Only AVX/AVX2 are tested, for the following reasons
- SSE2 is enabled by default and requires no flags
- SSE3/4 have no specific build flags for msvc
- AVX512 is not yet supported by cycles
Differential Revision: https://developer.blender.org/D8775
Reviewed by: brecht, sergey
The animated objects was not updated for each internal substep for the rigidbody sim.
This would lead to unstable simulations or very annoying clipping artifacts.
Updated the code to use explicit substeps and tie it to the scene frame rate.
Fix T47402: Properly updating the animated objects fixes the reported issue.
Reviewed By: Brecht, Jacques
Differential Revision: http://developer.blender.org/D8762
This patch moves the EEVEE depth of field shaders to eevee_shaders.c and
adds them to the eevee shaders test suite.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D8771
There was no way to reset the current file to factory settings
without reloading the preferences (which disables & re-enables add-ons),
this slows down resetting files and can complicate tests.
- Use WM_operatortype_description to get the operator description.
- Pass properties to WM_operatortype_name,
so the operator name callback is used.
- Add UI_but_operatortype_get_from_enum_menu function
to access the operator from enum menus.
- Change WM_operatortype_description to return NULL when there is no
description, use WM_operatortype_description_or_name
when either can be used.
This function was called when the modifier list changes and the panel
list has to be rebuilt. Originally I thought it was necessary to to remove
the block immediately when the panel was removed, but we can just
leave it and it will be removed later in the UI drawing process.
Removing this results in fewer string lookups.
Before, Cycles was using a shared Embree device across all instances.
This could result in crashes when viewport rendering and material
preview were using Cycles simultaneously.
Fixes issue T80042
Maniphest Tasks: T80042
Differential Revision: https://developer.blender.org/D8772
Recompute Rest Length stored in the StretchTo constraint after applying
the current pose as rest pose.
The "Apply Pose as Rest Pose" operator applies the evaluated pose as
rest pose, which means that the change in bone length from the StretchTo
constraint is applied to the rest pose. The bug was caused by the fact
that the StretchTo constraint wasn't updated for the new pose, and thus
still applied the same scale factor to the new pose, effectively
doubling its effect.
The "Apply Pose as Rest Pose" operator now forces a recompute of the
rest length cached in the StretchTo constraint data. As a result, the
length of the bone before and after the pose is applied remains the
same. The X and Z scale (perpendicular to the bone length) are reset to
1.0, as with the applied pose the bone isn't stretched or squashed any
more.
Remove the hack for library initialisation; this is no longer necessary
as the required information can be passed to the USD library after its
static initialisers have run.
This new approach is compatible with both the patched and original USD
library. This means that platform maintainers don't need to rebuild the
USD library until the next upgrade.
Manifest Task: https://developer.blender.org/T80320
Initialize the USD library when used (instead of at startup), so that
this can happen inside the IO/USD module. This makes calls to the USD
library local to Blender's USD code.
Note that failure to find the USD JSON files will now only be reported
when the USD exporter is used, and not on every startup of Blender.
This is the first step in cleaning up the way Blender patches and
initialises the USD library.
Manifest Task: https://developer.blender.org/T80320
Steps to reproduce were:
* Open Sequencer, add a sound strip
* In the sidebar, open the Adjust > Sound sub-panel
* Note the placement of the "Mono" item
The layout code would disable decorators if a property came from a
non-animatable data-block type. Doing so would mess up the alignment
where properties from different data-block types were be mixed.
This is not the case any more.
Note that when actually adding the decorator, a blank icon is inserted
to keep the alignment intact when the data-block type isn't animatable.
So the decorator is still not shown, but the alignment looks fine.
This may affect more cases. If so, and if that's an issue, the
decorators should be explicitly disabled.
This improves circles AntiAliasing, and line antialiasing.
This keeps the old drawing method (3d spheres) for the selection pipeline.
This was suggested by @harley on devtalk.
If the search menu was used for a string property, and a data-block was
selected from the search, the value set would be an invalid name. The
property would get the modified UI string, not the proper data name set.
This problem was already once solved in rB249ccab111ac, but resurfaced
in rB937d89afba36.
Now only use the modified UI string if requires_exact_data_name is not
true.
Note: the comments in rB249ccab111ac [reg. library hints and string
properties, also that pointer properties are preferred over string
properties when dealing with IDs] still apply.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D8759
(cherry picked from 2.90 commit
cb0b0416f4)
Keymaps must be customized by the user.
But this is not the case for hardcoded keymaps.
Also the repetition of hardcoded and user-defined keyitems may induce
the user to think they have made a mistake or it is a bug.
Differential Revision: https://developer.blender.org/D6454
Now that we use internal state info, we require drawing that uses the
GPU api to use it throughout the whole pipeline. This is in order to
track the GL state and do our own error checking.
Because depsgraph isn't rebuild for animated properies, we have to
assume that active bodies will always want to have updates from the
rigidbody simulation.
Calling: bpy.ops.wm.read_homefile(use_empty=True)
exposes invalid user-counts in versioning code.
Simplified logic for assigning materials in versioning code.
Caused by 29f3af9527.
- Direct assignment caused ID user counts to be invalid.
- The first palette would always be used,
even when the named palette searched for was found.
Also pass 'const' string to `hex_to_rgb`, avoid casting to 'non-const'.
Now the callbacks are setup for each debug context.
The formating has been reworked to be less verbose and make errors
and warnings stand out from the notifications.
Errors are most of the time sufficiently explicit in their message.
This also remove the support for AMD_debug_output which is 10 years old.
This is related to the Vulkan port T68990.
After discussion with @howardt, it seems the solver property should
always be exposed, even in lite builds. This commit removes the
ifdefs for that property and adds a warning if the "Exact" solver is
used when Blender is compiled without GMP.
These changes apply to the boolean modifier as well.
Delete `hdf5.diff`, because it's no longer used. Since Blender 2.90 the
optional support for HDF5 has been dropped, but this file accidentally
wasn't deleted.
See 0102b9d47e and 0c38436227.
No functional changes.
Now we have a better distinction of what is snap to grid and what is
snap to increments.
The code also allows the implementation of mixed snap for these modes.
This is part of the Vulkan backend task T68990.
This is mostly a cleanup, however, there is a small change:
We don't use a special Vertex Array binding function for Immediate
anymore and just reuse the one for batches.
This might create a bit more state changes but this could be fixed
easily if it causes perf regression.
# Conflicts:
# source/blender/gpu/intern/gpu_context.cc
Problem: the Blender synchronization process creates and tags nodes for usage. It does
this by directly adding and removing nodes from the scene data. If some node is not tagged
as used at the end of a synchronization, it then deletes the node from the scene. This poses
a problem when it comes to supporting procedural nodes who can create other nodes not known
by the Blender synchonization system, which will remove them.
Nodes now have a NodeOwner, which is set after creation. Those owners for now are the Scene
for scene level nodes and ShaderGraph for shader nodes. Instead of creating and deleting
nodes using `new` and `delete` explicitely, we now use `create_node` and `delete_node` methods
found on the owners. `delete_node` will assert that the owner is the right one.
Whenever a scene level node is created or deleted, the appropriate node manager is tagged for
an update, freeing this responsability from BlenderSync or other software exporters.
Concerning BlenderSync, the `id_maps` do not explicitely manipulate scene data anymore, they
only keep track of which nodes are used, employing the scene to create and delete them. To
achieve this, the ParticleSystem is now a Node, although it does not have any sockets.
This is part of T79131.
Reviewed By: #cycles, brecht
Maniphest Tasks: T79131
Differential Revision: https://developer.blender.org/D8540
This was caused by a double lock of the DRW context mutex.
This changes the logic a bit by releasing the DRW context before rendering
with BKE_sequencer_give_ibuf and restoring it after.
Critical fix for 2.91
Reviewed By: dfelinto
Differential Revision: https://developer.blender.org/D8657
Instead of calculating exact normals for all faces, just do it
for those that potentially intersect. A big improvement for dense
meshes that only intersect in relatively few places.
These were disabled in the newboolean merge commit.
This commit renables them, using the original 'FAST' solver
so that the result objects need not change.
A TODO to add more tests using the 'EXACT' solver,
though most functionality there is now covered by unit gtests.
This was affecting Mesa drivers as well as AMD pro driver. But it
might have been noticeable on other config too.
This was introduced by rBa9f2ebb21508.
This way it is way clearer what each viewport state is. There is
no more save and reset. The scissor test is also saved per
framebuffer.
The only rule to remember is that the viewport state (size and
origin) is reset for both the viewport and scissor when a texture
is attached or detached from an attachment slot.
This is related to the Vulkan port T68990.
This is a full cleanup of the Framebuffer module and a separation
of OpenGL related functions.
There is some changes with how the default framebuffers are handled.
Now the default framebuffers are individually wrapped inside special
GLFrameBuffers. This make it easier to keep track of the currently bound
framebuffer state and have some specificity for operations on these
framebuffers.
Another change is dropping the optimisation of only configuring the
changed attachements during framebuffers update. This does not give
any benefits and add some complexity to the code. This might be brought
back if it has a performance impact on some systems.
This also adds support for naming framebuffers but it is currently not
used.
This is in preparation of the Framebuffer GL backend.
This is a just changing types and moving some code.
No logic is changed... almost... it just removes the context attach.
i.e: `gpu_context_add/remove_framebuffer()`
This is not needed for now and was even disabled in release.
This is part of T68990.
Use this utility function for render-shading & weight paint modes.
This adds support for edit-mode & pose-mode where all objects in the
mode are used in this case instead of the selected objects.
Useful to perform cleanup operations on many objects at once,
also these operations weren't accessible from the search menu.
This follows the convention for other clean up menus
when editing mesh, curve & grease-pencil.
Resolves issues raised in T80011
This is useful to run in object-mode, instead of from the property editor,
note that this still only used the current object when activated from
the property editor.
This is useful to run in object-mode, instead of from the property editor,
note that this still only used the current object when activated from
the property editor.
The code that found coplanar clusters was not updating a bounding box.
Also, code that was detecting non-trivial coplanar intersects was
slightly wrong, but that would not have caused any functional problems.
This was added in 1cb7267a9f, however the behavior before this
would have failed on negative values already.
Also negative values here would fail in many other places.
Properties that display conditionally depending on other properties
should generally be lower down so the movement of buttons as
settings are tweaked is less intrusive.
This patch fixes assert on grid drawing. `for` loops are used instead
of `while` loops to make sure the number of lines is exact. The old
code draws lots of unnecessary lines offscreen. This bug is fixed as
well. See the patch for a comparison without a scissor test.
Differential Revision: https://developer.blender.org/D8745
Use correct text color when syntax highlighting is off but line numbers are on.
Differential Revision: https://developer.blender.org/D7337
Reviewed by Hans Goudey
Display negative zero floats as regular zero. Does not alter underlying value.
Differential Revision: https://developer.blender.org/D4795
Reviewed by Brecht Van Lommel
At first sight this code should not build at all
but due to the use of macro's that look like functions
this seemingly has no issues building.
Clang-format alerted me to this strange bit of code
by placing the `if` on it's own line for some reason.
added the missing brackets, and clang-format is happy
again.
`ssize_t` is not a standardized type (it's a posix type)
given the line in question here is calculating the size
of a memory allocation there's no logical way this
should ever be negative.
I do not know this code too well and was unsure if
`mdverts->totweight` could ever be < 0, so I protected
it with a clamp, just in case.
This is for design task T67744, Boolean Redesign.
It adds a choice of solver to the Boolean modifier and the
Intersect (Boolean) and Intersect (Knife) tools.
The 'Fast' choice is the current Bmesh boolean.
The new 'Exact' choice is a more advanced algorithm that supports
overlapping geometry and uses more robust calculations, but is
slower than the Fast choice.
The default with this commit is set to 'Exact'. We can decide before
the 2.91 release whether or not this is the right choice, but this
choice now will get us more testing and feedback on the new code.
Problem is again with the embedded data, we want to make those local
together with their owner ID, but sometimes we are actually dealing with
copies here, which are inheritently already local.
Code did not considered that possibility before, leading to access to a
NULL `lib` pointer.
This should also be back-ported to 2.83 LTS release.
Maniphest Tasks: T80104
Differential Revision: https://developer.blender.org/D8731
The CPP Shader class does not initialize the interface attribute.
What will crash when deleting the shader.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D8740
We need to have transforms from passive objects if they are animated or
driven by parent relations. This is not immediately obvious as the
object transform matrix will still be available, it is just one frame
behind in some cases.
Fixed dependency cycles if there is a constraint between two rigid
bodies. Because bullet keeps track of its simulated bodies, we do not
need to supply objects transforms as bullet should already have them.
I need combine these two fixes because otherwise we will get depsgraph
warnings that nodes are missing that it expects to be there.
Reviewed By: Sergey, Jacques
Differential Revision: http://developer.blender.org/D8732
Issue was with our dear posebones again... when applying overrides we
keep the same address/pointer for the IDs themselves, (which avoids us
the need to remap their usages), but their inner data is often
re-allocated.
Therefore, we need once again to go over armature objects and invalidate
their posebone pointers.
This should also be back-ported to Blender LTS 2.83.
Maniphest Tasks: T80078
Differential Revision: https://developer.blender.org/D8734
A test case that compiles all the GLSL shaders for workbench, gpencil, overlay and some
of eevee. Compilation is still platform dependent, but when run on a test-farm
with different hardware we will be able to detect GLSL compilation
errors early on.
The test will be compiled when `WITH_GTEST` and `WITH_OPENGL_DRAW_TESTS`
are On.
For eevee only the shaders inside eevee_shaders.c are included. EEVEE has some shaders
located inside the submodule. They aren't accessible to the outside and aren't added
to the test case. We should see how we want to add them. For the test cases it is better
to move them to eevee_shaders.c, but for eevee perspective it is better to keep them in
the submodule. Keeping them in the submodule could lead to situations that is harder to test.
as the shader could already have been initialized.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D8667
There were some missing UBO bindings, what asserted in debug mode.
This patch fixes this by binding the missing UBO's
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D8742
In recent refactoring {a9f2ebb21508} an issue was introduced that the
opengl rasterizer would be disabled when only writing to a stencil
buffer.
This fix adds stencil writing to the write mask and set it. This makes
the write map not evaluate to GPU_WRITE_NONE and the rasterizer will be
enabled in `GLStateManager::set_write_mask`.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D8743
The CPP Shader class does not initialize the interface attribute.
What will crash when deleting the shader.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D8740
Caused by rB49f59092e7c8: Curves: Implement Handles for selected points
only
Changes from deselecting all were not considered as changes anymore.
Maniphest Tasks: T80182
Differential Revision: https://developer.blender.org/D8744
This is part of T76372.
It adds the `blend_write`, `blend_read_data`, `blend_read_lib`
and `blend_read_expand` which correspond to the various
steps when reading and writing .blend files.
Having these callbacks allows us to decentralize the blenloader
code a lot more. This has the affect that code related to any
specific ID type is less scattered.
Reviewers: mont29
Differential Revision: https://developer.blender.org/D8670
We forgot to update this code as part of D3108. I'd like to include this in 2.90,
it's entirely broken now so can't really get any worse.
Differential Revision: https://developer.blender.org/D8738
More localized variables, avoid ugly 'offset by one' index usage in
favor of explicit `INDEX_UNSET` define, etc.
No behavior change expected from this commit.
Checks to preserve the active spline on duplication
required an active vertex too.
Now having no active vertex doesn't prevent duplicate
from keeping the spline active.
Reviewed by: @mano-wii
Ref D8729
Left walk navigation while the scene collection is active would collapse
the subtree which shouldn't be allowed. This adds another check to
`outliner_item_openclose` to prevent collapsing the scene collection.
Introduced in rBb077de086e14.
Because the subtrees in Data API mode are empty for performance reasons,
it was impossible to move through the tree with walk navigation. This
adds an exception to allow walk navigation to expand subtrees in that
mode.
custom split normals data
Clearing custom split normals would get rid of the CD_CUSTOMLOOPNORMAL
layer - but editing data `lnor_spacearr` would be kept.
Adding a CD_CUSTOMLOOPNORMAL layer (if none exists yet) should be done
in `edbm_average_normals_exec` / `BKE_editmesh_lnorspace_update` /
`BM_lnorspace_update` / `BM_lnorspacearr_store`. The thing is that if
the editing data `lnor_spacearr` would still be valid after `Clear
Custom Split Normals Data`, blender would happily call
`BM_lnorspace_rebuild` instead. Doing that without a CD_CUSTOMLOOPNORMAL
layer is asking for trouble.
Now clear lnor_spacearr on `Clear Custom Split Normals Data` as well.
Thx @mont29 for feedback here.
Maniphest Tasks: T80159
Differential Revision: https://developer.blender.org/D8730
Currently the panel handler loops through every block and every button
for every single panel. This commit moves that check to happen a single
time at the beginning.
We need to only collapse or expand the first panel under the cursor
rather than all of them. Note that whether the parent panel or
the subpanel is first depends on the order of the uiBlocks in the
region's list.
The code for handling panel events was much more complicated than it
needed to be. This commit removes some unecessary function calls and
variables, reduces indentation levels by returning early, and does
some other general cleanup.
Somehow the panel category drawing functions ended up in the middle
of the region event handling code. This commit moves them to their
own section next to the rest of the drawing code.
If a different object was active, clicking on a linked armature's pose
in the Outliner would enter Pose Mode for it.
This would actually cause a failed assert, but in release builds the
armature would just enter pose mode.
Steps to reproduce were:
* Link in armature object
* Activate a different object
* In the Outliner, un-collapse the armature object
* Activate Pose Mode by clicking on its pose there
MSBuild on windows currently spews a warning about
buildinfo.h_fake not being generated.
For build info we use a non existing file to trigger a
custom_command on every build, which has worked well for
years now, however in recent versions of MSBuild it has
started issuing warnings about files that should be
generated but are not.
CMake is actually aware of this being a problem and states
in the documentation that "If the output of the custom command
is not actually created as a file on disk it should be marked
with the SYMBOLIC source file property."
This change fixes the build warning by properly marking the
buildinfo.h_fake as symbolic resolving the warning.
Need to make sure node factories are initialized prior to the dependency
graph allocation.
The regression was initially introduced in 5b021dff41
Thanks Brecht for testing!
It is now possible to build against a shared embree library.
Before it was only possible to build against static Embree libraries.
Reviewed By: Brecht
Differential Revision: http://developer.blender.org/D8702
MSVC already builds with the /std:c++17 flag but for
'reasons' [1] MSVC still gives the wrong value for the
__cplusplus define.
This change sets an additional cxx flag on supported
compilers to allow the compiler properly identify
C++17 support.
This resolves 2 warnings coming out of bullet about
the register keyword being deprecated.
[1] https://devblogs.microsoft.com/cppblog/msvc-now-correctly-reports-__cplusplus/
OSL requires RTTI to be off, this is done with the /GR- flag for
MSVC, however /GR is in the default CXX flags leading to warning
D9025 : overriding '/GR' with '/GR-'
which cannot be suppressed.
/GR is on by default and this flag is not required, so removing
it from the default CXX flags makes it possible later use /GR-
without generating warnings.
The changes in rB70151e41dc02 broke subtree expansion in the Data API
display mode because the closed subtrees are empty lists. Move the empty
subtree check from `outliner_item_openclose` to the walk navigation
code to prevent the issue.
`IDTypeForeachCacheFunctionCallback` lists the `flags` parameter
as `uint`, having these functions use `eIDTypeInfoCacheCallbackFlags`
results in the following warning when building with MSVC:
warning C4028: formal parameter 4 different from declaration
This change resolves this warning by changing the parameter to
the appropriate type.
The outliner already uses the alternating row theme color as an
overlay for every other row. This uses the same color for the file
browser, instead of a hardcoded shading.
The file browser background color is slightly tweaked to match the
outliner, and the Blender Light theme is updated to use a lighter
background color like the outliner.
Reviewed by: Hans Goudey, Julian Eisel
Differential Revision: https://developer.blender.org/D8717
This adds a new `--debug-exit-on-error` flag. When it is set, Blender
will abort with a non-zero exit code when there are internal errors.
Currently, "internal errors" includes memory leaks detected by
guardedalloc and error/fatal log entries in clog.
The new flag is passed to Blender in various places where automated
tests are run. Furthermore, the `--debug-memory` flag is used in tests,
because that makes the verbose output more useful, when dealing
with memory leaks.
Reviewers: brecht, sergey
Differential Revision: https://developer.blender.org/D8665
when you call the BLI_array_free macro with a const pointer you get a
warning when the macro calls `MEM_freeN` (warning C4090: 'function':
different 'const' qualifiers)
This was warning originating from
`smart_uv_project_calculate_project_normals` in `uvedit_unwrap_ops.c`
Normally we resolve these with a non const cast at the callsite
but given BLI_array_free is a macro not a function this is not
an option here and it has to be resolved in the macro.
Since the switch to TBB, the threads value specificies the maximum number of
CPU cores used while rendering, it is not longer possible to use more threads
than cores. Change the tooltip to make this more clear.
The `ctrl` key was mapped to recursive bone selectable and visibility
toggling. This changes the key to `shift` to be consistent with objects
and collections. Also adds an explanation to the tooltip.
Part of T77408
Differential Revision: https://developer.blender.org/D8650
Previously the left and right arrow keys would close and open the active
tree element, but a subsequent key press would not select up or
down the tree as is common in tree-based interfaces.
Walking left and right now does a selection action after opening or closing
the active tree item. For example, a right key press on a closed element
will open it's subtree, and an additional right key press will select
the first child element.
A left key press anywhere in a subtree will first close the active
element if it's subtree is expanded. Walking left again will select the
parent element.
Part of T77408
Differential Revision: https://developer.blender.org/D8650
The main CMakeLists.txt specifies C++17, quadriflow tries to add C++14
flags leading to the following warnings when building with MSVC
Command line warning D9025 : overriding '/std:c++17' with '/std:c++14`
This change removes the C++14 flags, and fixes a build error caused
by the removal of `std::unary_function` in C++17 in the .obj loader
(which isn't used by blender)
Reviewed By: zeddb
Differential Revision: https://developer.blender.org/D8720
For bullet we compile at /W0 for MSVC but we did not
remove the standard /W3 flag. Leading to the following
warning:
Command line warning D9025 : overriding '/W3' with '/W0'
This change removes the W3 flag for bullet to get rid
of the warning.
When Blender is started in fullscreen mode from the command line,
or if the fullscreen state is saved in the startup file, all temporary windows
will also open in fullscreen mode. When closing the fullscreen File Browser,
Blender would either crash or parent window becomes black.
This does not happen if the Blender switches to full screen manually.
`NSWindowCollectionBehaviorFullScreenPrimary` should be set for windows that
can enter full-screen mode. Otherwise macOS will turn the wrong window into
full-screen.
Similar fix: rB4b39de677d20
Differential Revision: https://developer.blender.org/D8708
Reviewed by: Julian Eisel
This refactors Box Mask and Lasso mask making both functions share the
same code. After this change it should be easier to add new
functionality, new gesture tools or implement new gesture modes.
No functional changes.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8707
Use BKE_mesh_wrapper API access to access mesh coordinates
for modifier evaluation.
Call BKE_mesh_wrapper_ensure_mdata when binding
since it's a one off operation.
Regression from deaff945d0.
Reviewed by: @brecht
Ref D8709
This was an oversight in rB83e3d25bcae3.
Basically we still have the "hair" and "point_cloud" entries for the
context. However they were ifdef'ed.
Note this would mostly happen in 2.90 since we always build without hair
and particles there.
Differential Revision: https://developer.blender.org/D8712
- Cycling between part of the boundary & the entire UV boundary.
- Include pole vertices in the selection.
Edge loop selection was rewritten to use BMesh connectivity data.
Further changes to interface_handlers.c to avoid a block of variable
declarations at the beginning of functions. Also use const in some
situations. I only made changes where the variable's intended scope
was obvious.
- Reduce variables scope
- Use some const prefixes
- Initialize variables at declaration
- Use comparison to boolean false instead of 0
Differential Revision: https://developer.blender.org/D8678
This fix a GL_INVALID_VALUE error on startup due to 0.0f max line width.
Also moves the max anisotropy filter to the sampler creation.
This reduces code fragmentation.
Grease pencil modifiers already had defined outliner icons, but had
never been included in the tree. This adds the modifiers and the shader
effects to the tree.
Part of T68498
The previous fix loaded the pixels so existing tiles were not overwritten.
However the Cycles render buffer is expected to be scaled by the number of
sample, which was not taken into account.
This is not ideal in that previews could have a mismatched number of samples
between multiple objects, though the result will be correct. The better solution
would be to bake all objects together per tile, rather than one after the other.
But that is a bigger change than we can do in 2.90.
Differential Revision: https://developer.blender.org/D8704
This prevents UV layer mix up in
MeshBatchCache.cd_used/cd_needed/cd_used_over_time which depends on the
extraction method.
One object's mesh can be accessed with MR_EXTRACT_MESH, another object
that uses the same mesh can use MR_EXTRACT_BMESH based on
(Object.mode & OB_MODE_EDIT), this causes a problem as the edit-mesh
and the mesh aren't always in sync, the custom data layers wont
necessarily match up, causing T77359.
Reviewed by @jbakker, @brecht
Ref D8645
This should not cause any problem since the depth test is required
in order to draw to the depth buffer and this is not altered by
this change.
To be on the safe side, we still restor the mask after altering it.
This workaround addresses T79533 and T79038 for Blender 2.90. The
solution isn't clear and needs more research and work. In order to
continue with blender 2.90 release it was proposed to add this work
around.
It has been tested with the test files provided in the reports.
Reviewed By: Dalai Felinto, Clément Foucault
Differential Revision: https://developer.blender.org/D8695
This workaround addresses T79533 and T79038 for Blender 2.90. The
solution isn't clear and needs more research and work. In order to
continue with blender 2.90 release it was proposed to add this work
around.
It has been tested with the test files provided in the reports.
Reviewed By: Dalai Felinto, Clément Foucault
Differential Revision: https://developer.blender.org/D8695
Use invert_m4_m4_safe_ortho when joining objects so zero scaled axis
doesn't cause all points to be scaled to zero.
Instead geometry is left un-scaled on degenerate axes.
Report a warning in this case since users may want to adjust the
active objects scale.
Unlike invert_m4_m4_safe, this calculates zeroed axes.
Useful when we need to use the inverse of an objects matrix,
keeping the valid axis, only filling in the zeroed ones.
This implements Snake Hook as a deform type for the cloth brush. This
brush changes the strength of the deformation constraints per brush step
to avoid affecting the results of the simulation as much as possible. It
allows to grab the cloth without producing any artifacts in the surface
and create more natural looking folds than any of the other deformation
modes.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8621
In 2.83 and previous versions there was a bug that was causing boundary
vertices to be detected incorrectly that was preventing the smooth brush
to work on boundaries if there was a pole on them.
In 2.90 the boundary vertex detection was fixed, but it was still using a
simplified version of the algorithm without any boundary smoothing. This
patch implements a similar smoothing algorithm to what I think it was
the intention of 2.83 and previous versions, but working correctly.
Reviewed By: sergey
Maniphest Tasks: T80008
Differential Revision: https://developer.blender.org/D8680
This is quite embarassing... it was returning the base instance instead of
the correct vao. No wonder that it was causing crash and at most drawing
issues.
This skips the subdivision operation if the mesh has no loops, avoiding
the crash.
Reviewed By: sergey
Maniphest Tasks: T80039
Differential Revision: https://developer.blender.org/D8696
The return value of scene_intersect must be checked, the isect struct members
can't be assumed to be initialized if that returns false.
Differential Revision: https://developer.blender.org/D8692
The problem occurs when a deforming modifier is added to the object
after the MeshSequenceCache modifier. We should only consider the cached
velocities if the MeshSequenceCache modifier is the last one on the
object and we also need to check for the correct vertex count before
adding the motion vertex attribute.
Ensure that time source always is in the dependency graph, allowing to
tag the graph for time update prior it was fully built.
Collaboration of Philipp Oeser, Jacques Lucke and myself.
Thanks everyone :)
`TH_UV_OTHERS` is a theme option that isn't hooked to anything since
blender 2.80. This patch will remove the option and related code.
Reviewed By: Campbell Barton
Differential Revision: https://developer.blender.org/D8669
The code uses OpenGL functionality, so is to be linked against
OpenGL libraries.
This makes it easier to integrate with cycles using CMake.
Differential Revision: https://developer.blender.org/D8371
This was caused by motion blur camera movement tagging the view as
invalid and thus resetting the temporal sampling.
Critical fix for 2.90. Need second look, but quite confident. This function
is only called once when Motion blur is off.
Reviewed by: jbakker
Differential Revision: https://developer.blender.org/D8676
This operator is dependent on mouse position (if the Use Cursor Position
option is used). The Channel property is irrelevant/unused in this case.
So it is not optimal displaying this property when calling this from the
menu (or even using the shortcut with default settings).
Now use a custom UI in the Adjust Last Operation panel in this case.
The properties are now drawn in relation to another then (Channel
underneath Use Cursor Position) next to some other minor layout
improvements.
Thx @HooglyBoogly for feedback (also providing UI code)
Maniphest Tasks: T79872
Differential Revision: https://developer.blender.org/D8625
This replace `GPU_clear()` by `GPU_clear_color()` and `GPU_clear_depth()`.
Since we always set the clear value before clearing, it is unecessary
to track the clear color state.
Moreover, it makes it clearer what we clear the framebuffer to.
When the OSL_ROOT variable is set this is ignored
by findpackage on cmake < 3.12. CMake 3.12 and up
also ignore it and warn about it. This change
tells cmake it is OK to use the variable and
stop warning
This changes the state of occlusion queries quite a bit. Now scissors is
explicitely disabled and we enabled color write.
I still don't understand why we now need this. This patch is just trial and
error on an affected setup. Note that on the same computer, renderdoc
was not able to capture the regression (the regression did not manifest
during capture).
Regression likely introduced by rB5f414234ddea
Mistake in b077de086e. I did the same fix for a few operators there,
but missed the object "Join" one.
The joining operator changes the layer content. So it must send a
notifier for that.
Before b077de086e that didn't cause a noticeable issue, because the
Outliner happened to listen to other notifiers (active/selection
changes) the operator sent and fully rebuilt its tree in response. Now
missing these notifiers can be more problematic, since we try to avoid
more rebuilds.
Added comments to the notifier types to avoid at least this pitfall.
Since stone age of lib_query, the code would iterate over the current
list of active sequences (from a meta strip e.g.), and not over the
whole list of those.
This is a critical issue as it means in some cases (editing a meta strip
typically), some ID pointers would be missed/ignored by this foreach
looper, which is now at the center of most of our ID management code.
This caused a bug here at the studio, leading to loss of all sound IDs
used by sound strips when editing and undoing inside a meta strip, since
ID refcounting would not happen properly on strips using sounds outside
the meta-strip context during file reading of the undo steps.
To be backported to 2.83.
Differential Revision: https://developer.blender.org/D8671
This is in preparation of vulkan backend. We move all opengl
functionnalities behind an abstract class.
This also cleansup the "dynamic" ubo create and rename it to
`GPU_uniformbuf_from_list()`
Contains, no functional change.
Part of T68990 Vulkan support.
This follows the GPU module naming of other buffers.
We pass name to distinguish each GPUUniformBuf in debug mode.
Also remove DRW_uniform_buffer interface.
Remove `exec()` and `eval()` calls from `WM_OT_properties_edit` where
possible. This not only results in simpler, cleaner code, but also
removes the necessity for `repr(value)` to evaluate to a Python
expression that in turn evaluates to `value` again.
No functional changes.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D8658
Split the depsgraph allocation into a separate function
`BKE_scene_ensure_depsgraph()`. Parameters are only passed to those
functions that actually need them. This removes the the "if that boolean
is `false` this pointer is allowed to be `NULL`" logic and more cleanly
decouples code.
No functional changes.
Reduce nesting by flipping conditions and returning early. It's now much
clearer that it's actually a linear function (rather than a nested one).
No functional changes.
For the sanity checks to work we don't actually need to check other
scenes. So this function can be simplified so that it does not require
a `Main *`.
Mistake in 5cc08510e0.
- Use const in some places where applicable
- Use consistent variable names in some places
- Use "r_" prefix for return arguments
- Declare variables in smaller scope where they are used
We can avoid the rather expensive outliner tree rebuilds and only redraw
if nothing but the selection or active item changes. This should give a
bit of speedup for heavy scenes.
For this to work I had to correct a few notifiers, some were only
sending selection/active change notifiers that actually did things like
adding objects. I also added a more precise notifier type for when the
active collection changes. At the notifier subtype/action level we're
not even close to running out of bits, so this should be fine.
Also had to correct a wrong notifier check (was using `&` rather than
`==`).
Code dealing with object copy of master collection was bugy in case one
of the new object copy would get a name lesser than the original object,
leading to new copy being inserted before original one in lists.
Maniphest Tasks: T79931
Differential Revision: https://developer.blender.org/D8656
Allow adding keys outside of the NLA strip, when Sync Length is
activated. Before this, an animator would have to exit tweak mode,
adjust the strip length, then enter tweak mode again.
Now the animator can freely insert and modify keys outside of the strip
bounds. They will never have to touch the strip bounds directly.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D7533
This moves the allocation for filter to separate functions, removes all
repeated calls to RNA_enum_get an fixes some other code quality issues.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8639
This updates the view navigation origin after modifying the pivot
position.
Reviewed By: sergey
Maniphest Tasks: T79924
Differential Revision: https://developer.blender.org/D8632
Cloth deform brushes (both in cloth brush or other tools with cloth
simulation targets) should not have their spacing as a value relative
the brush radius to avoid affecting the simulation speed when changing
the brush radius.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8620
This adds the orientation modes to the Cloth Filter.
Similar to the mesh filter, they set the orientation of the axis when
limiting the forces.
When using the gravity mesh filter, the orientation also sets the gravity
direction. In world orientation, cloth will always fall towards the
ground plane. In view mode, cloth will always fall down relative to the
view.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8618
Change the way Sync Length works so that it keeps keyframes at the same
key as before the sync. Now when the user exits tweak mode, the overall
NLA result is unchanged.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D7602
Popovers which are aligned with properties should turn themself
(and the panel they open) inactive when the corresponding property
toggle is turned off. A notable exception is the snap settings
popover, as snapping can still be used when the toggle is off.
Differential Revision: https://developer.blender.org/D8584
This reverts {rB1693a5efe91999b60b3dc0bdff727473b3bd00bb}
and implements an alternative solution.
The old patch had the problem that the depsgraph would always
evaluate at the current frame of the original scene (even when
`DEG_evaluate_on_framechange` was used). Now it is possible
to evaluate the depsgraph at a specific frame without having to
change the original scene.
Reviewers: sergey, sybren
Differential Revision: https://developer.blender.org/D8616
Add `-Wno-maybe-uninitialized` option to `CMAKE_CXX_FLAGS_RELEASE` and
`CMAKE_CXX_FLAGS_RELWITHDEBINFO` variables on GCC/Linux.
In Release builds GCC's `-Wmaybe-uninitialized` warning is unreliable,
and thus causes noise that can drown out other warnings. These warnings
are now silenced in release mode builds.a
Debug builds seem fine, so flags for debug builds are not touched by
this commit.
No functional changes.
Reviewed By: Sergey
Differential Revision: https://developer.blender.org/D8615
This reverts commit 52f40bcff2.
Apologies for the noise. I caught a problem with this that I hadn't before. I will
commit later after thorough testing.
This will re-link all usages of a library override data-block
(including all of its override dependencies) to its reference linked
IDs, and delete those liboverrides.
As usual, it is available in the ID sub-menu of the outliner context
right-click menu.
Part of T76555.
RNA update function would only update objects from 'main' instantiated
collection, not those from sub-collections.
This should be comitted to 2.90 (and backported to 2.83 too).
Maniphest Tasks: T79935
Differential Revision: https://developer.blender.org/D8654
RNA update function would only update objects from 'main' instantiated
collection, not those from sub-collections.
This should be comitted to 2.90 (and backported to 2.83 too).
Maniphest Tasks: T79935
Differential Revision: https://developer.blender.org/D8654
Continuing the work of eb9055a572, remove remaining unecessary
variables and arguments that were related tabbing and horizontal
alignment of panels. For example, "vertical" was always true, and
removing that exposed other unused variables.
Horizontal panel alignment hasn't been used for years, and we have no
plans to use it in the future. It adds a fair amount of complexity to
the panel code which makes adding features take longer.
This code removes the X closing flag, and all of the logic / variables
unused without it.
This commit includes a file subversion bump.
Differential Revision: https://developer.blender.org/D8601
Using C++ exceptions in Blender is difficult, due to the large
number of C functions in the call stack. However, C++ data
structures in blenlib should at least try to be exception safe,
so that they can be used if someone wants to use exceptions
in some isolated area.
This patch improves the exception safety of the Vector, Array
and Stack data structure. This is mainly achieved by reordering
some lines and doing some explicit exception handling.
I don't expect performance of common operations to be affected
by this change.
The three containers are supposed to provide at least the
basic exception guarantee for most methods (except for e.g.
`*_unchecked` methods). So, resources should not leak when
the contained type throws an exception.
I also added new unit tests that test the exception handling
in various cases.
Available from the usual ID submenu in the Outliner context menu.
The goal of this operator is to re-create the override from the linked
data, while preserving existing defined overrides.
This allows to update local opverrides when relations between datablocks
are changed in source library linked data.
Part of T76555.
This splits the volume related data (properties for rendering and attributes) of the Mesh node
into a new `Volume` node type.
This `Volume` node derives from the `Mesh` class since we generate a mesh for the bounds of the
volume, as such we can safely work on `Volumes` as if they were `Meshes`, e.g. for BVH creation.
However such code should still check for the geometry type of the object to be `MESH` or `VOLUME`
which may be bug prone if this is forgotten.
This is part of T79131.
Reviewed By: brecht
Maniphest Tasks: T79131
Differential Revision: https://developer.blender.org/D8538
Now by default the selection mode is All keyframes types.
Also removed the icon for All option and renamed from `All Types`to `All`.
UI review by @pablovazquez
Users may input an invalid scene/view-layer combination via Python. We
can easily detect that and fail gracefully.
Besides checking input parameters in RNA, also assert the
scene/view-layer combination is valid in lower level Depsgraph lookup
function (called by statistics query).
This RNA/BPY function was removed in c08d847488. For understandable
reasons really-- getting scene statistics from a string displayed in the
status bar is not exactly the best design. But we have committed to not
changing the RNA API too much for the 2.90 release, so we would like to
keep this functionality.
Differential Revision: https://developer.blender.org/D8604
Reviewd by: Julian Eisel
This RNA/BPY function was removed in c08d847488. For understandable
reasons really-- getting scene statistics from a string displayed in the
status bar is not exactly the best design. But we have committed to not
changing the RNA API too much for the 2.90 release, so we would like to
keep this functionality.
Differential Revision: https://developer.blender.org/D8604
Reviewd by: Julian Eisel
During alpha the user preferences > experimental featuers are available
to prevent merge issues and allow developers to seek feedback.
This needs to be manually turned off when we branch for beta, otherwise
the RNA of the incomplete features will be exposed.
I only skipped a few loops in the monstrous ui_handle_menu_event
function. Also, I only changed variable names where necessary to
prevent redeclarations.
Differential Revision: https://developer.blender.org/D8586
This make use of the GLStateStack functions for:
- `GPU_blend()`
- `GPU_blend_set_func()`
- `GPU_blend_set_func_separate()`
The goal is to unify them using an explicit state setting.
This will remove the need to use obscure blend functions
Now error printing only display the line related to the error.
We also put char marker if present.
Example:
```
-- Shader Compilation Errors : MAMaterial --
10414 | node_fresnel(, facingnormal, viewposition, tmp34);
| ^
| error: syntax error, unexpected ',', expecting ')'
----------------------------------
```
This mainly removes the bmain argument, which can be
retrieved from the graph itself.
Also, I removed some outdated/unnecessary comments.
Reviewers: sergey, sybren
Differential Revision: https://developer.blender.org/D8614
This adds a new brush property called "Deformation Target" which
controls how the brush deformations is going to affect the mesh data. By
default is set to Geometry, which makes the brushes displace the
vertices. When set to Cloth Simulation, the deformation of the brush is
applied to the cloth solver constraints, so the simulation is
responsible to apply the final deformation. This allows to add cloth
simulation effects to other sculpt tools with minor modifications to their
code.
This patch enables Cloth Simulation deformation target for Pose and
Boundary brushes, which are tools that are already designed to work in
low poly counts and produce large deformations. This allows creating the
most common cloth effects, like bending and compressing folds, without
relying on collisions.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8578
Same concept as the Multires Displacement Eraser Brush but implemented
as a mesh Filter. This allows to delete the displacement of an entire
area uniformly.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8608
This enables the invert mode in the smooth brush as Enhance Details.
The operation is similar to the Sharpen Filter intensify details parameter,
which consist in applying the laplacian smooth displacement in the opposite
direction calculated using the original coordinates.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8509
The evaluated mesh is now only recomputed when the required data layers
are missing. Previously the evaluated mesh was re-evaluated incorrectly,
which caused the stippled result and the failing assert.
Since now only the evaluated mesh is used, and never a temporary mesh,
there is also no more need to keep track of whether the mesh needs
freeing or not.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8574
Issue introduced on fe045b2b77.
Since the stereoscopy compositing (anaglyph, ...) is only done for
viewports the VSE preview and compositor need to use viewports.
Reviewed by: dfelinto
Differential Revision: https://developer.blender.org/D8472
Issue introduced on fe045b2b77.
Since the stereoscopy compositing (anaglyph, ...) is only done for
viewports the VSE preview and compositor need to use viewports.
Reviewed by: dfelinto
Differential Revision: https://developer.blender.org/D8472
Previously, the XYZ deform axis of the Mesh Filter were limited to
object space (which is the default for sculpt mode). Now it is possible
to limit the XYZ displacement in Local, Global or View space.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8582
For 2.90 release this should not be exposed in the RNA API.
In master this needs to be ON by default, that's all.
Differential Revision: https://developer.blender.org/D8589
The Pass struct is now a Node and the passes are moved from the Film
class to the Scene class.
The Pass Node only has `type` and `name` as sockets as those seem to be
the only properties settable by exporters (other properties are implicit
and depend on the pass type).
This is part of T79131.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8591
Final releases (including beta) should strictly show features that are
finalized to prevent loss of data, old API clanging around, and the
overall quality of the product (Blender) presented.
Note that rendering should never be affected by user preferences, so
this is only changing things in the UI level.
Development note: This is reset experimental UI on file load.
Also note: to hide RNA (needed for hair and particles) will be done as a
separate patch.
Differential Revision: https://developer.blender.org/D8606
After drawing, the batch could be reset and draw again using other
parameters.
Avoid having to track references by setting the batch pointer to NULL after
drawing.
This uses the same concept of the Mesh Filter but for applying the cloth
filter forces, so now it can be limited to a specific axis.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8567
This adds an option to the Multires modifier to sculpt directly on the
base mesh while previewing the displacement of a higher subdivisions
level. What this does it considering Multires as a regular modifier
without exposing the grid displacement to sculpt mode.
This allows to see the propagation happening in real time, which enables
to use complex tools like Cloth or Pose in much higher resolutions and
without surface noise and artifacts.
Reviewed By: sergey, Severin
Differential Revision: https://developer.blender.org/D8555
Functions `mesh_create_eval_final_view()` and
`mesh_create_eval_final_render()` were doing the exact same thing,
except for a hack introduced in d3eb9dddd6 (2012-10-08, Better fix for
T32846: dupligroup messes up particle instancing on rendering) that
appears to be no longer necessary. Besides that, these functions had
confusing names. Their functionality changed over time, and whether to
do for-render or for-viewport evaluation is now actually determined by
the depsgraph evaluation mode. This means that the `..._render` function
could evaluate a mesh with viewport settings, and vice versa.
The functions are now merged into `mesh_create_eval_final()`, and the
hack has been removed. The `OB_NO_PSYS_UPDATE` flag has been removed
entirely (instead of keeping it around as deprecated flag), because it
was always only temporarily set on objects during mesh evaluation and
thus not saved to the blend file.
No expected functional changes as far as users are concerned.
One should be able to edit overridable IDProps values, but never their
settings/definitions.
Note that being able to add new IDProps to overrides is still a TODO.
Reported by Josephbburg (@Josephbburg) over blenderchat, thanks.
Even the Cloth Brush grab works like a regular grab brush, it makes
sense to support spacing just in this brush in order to prevent creating
more brush steps that update the simulation. This way, it is possible to
create grab brushes that update the simulation constantly while grabbing
(using the dots stroke mode) or brushes that only update the simulation
when the cursor moves (using spacing).
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8568
This code was left here after the refactor, it was doing nothing and it
was causing an assert.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8579
The Face Set visibility operator was using the last active Face Set
updated by the paint cursor, so when the paint cursor is not used (when
using a filter or a transform tool), the active Face Set was not updating
and it was hidding the wrong Face Set based on the last cursor position
with a brush tool active. Now the Face Set Visitility operator has an
invoke callback wich forces a active vertex and face set update
regardless of the active tool, so it should always work correctly.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8580
This uses a single row for the three axis instead of a row per axis.
Reviewed By: sergey, Severin
Differential Revision: https://developer.blender.org/D8581
This was a TODO in the code. Previously the Face Set datalayer was
deleted and recreated with a constant ID of 0. Now the datalayer is
preserved and set to the SculptSession after slicing the mask and a new
ID is calculated for the new faces that the slicing operation produced,
so they can be easily isolated for further tweaking.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8583
This will be used for new features like supporting cloth deformation in
other brushes and tools outside of the cloth brush code.
No functional changes.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8602
This moves `Session::get_requested_device_features`,
`Session::load_kernels`, and `Session::update_scene` out of `Session`
and into `Scene`, as mentioned in D8544.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8590
Some constraint-specific operators, like set/clear inverse matrix of
childof constraint, are also valid on original, linked/overridden
constraints.
Similar change to what was done to modifiers poll function a few days
ago.
Reported by Josephbburg (@Josephbburg) over IRC, thanks.
The description is self-explanatory: enable SSE optimizations in the
FFmpeg library. They were disabled from the very beginning of the
dependency builder, possibly due to portability concerns.
FFmpeg does perform runtime check for available CPU microarchitectures,
so the codecs will still run on older hardware, but they will run way
faster on newer hardware.
For example, re-encoding 3405 2560x1376 frames on Xeon E5-2699 V4 CPU
went down from 313sec to 210.
Differential Revision: https://developer.blender.org/D8594
Changing line-width shouldn't scale cursor motion. Related to T79787.
Use dpi_fac for scaling curve error threshold & number button drag
threshold calculation.
Use 'dpi_fac' instead of 'pixelsize' to scale input sensitivity
based on the interface scale.
Also use dpi_fac for view zoom operator.
Thanks to @ISS for investigating.
Multithreaded implementation can provide significant performance gain
on CPU's that can handle more parallel tasks.
On my 8 core system I got about 3.5x faster processing speed.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8585
Define `RNA_def_property_ui_range` for head and tail transform properties.
Step of 10 should match original behavior when tweaking value.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D8513
Original sequence lookup failed, becase name changed in another thread.
Fix is same as 0471349c90 - stop prefetching before changing content
of seqbase.
I have covered more cases, and added assert so it is more obvious that
issue is in lookup, and it shouldn't fail.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8592
The fix for T75936 made it possible to export invisible objects to
Alembic. This commit applies the same approach to the USD exporter.
The USD and Alembic code is slightly different in terms of where in the
exported file the visibility attribute is stored. In USD the visibility
is used to prune the scene graph, and thus there are only two options:
"hidden" and "inherited". Setting the visiblity of a node in the scene
graph to "hidden" immediately hides all its children. To allow hidden
parents with visible children, the visibility is stored on the object
data (so the geometry/camera/lamp/etc) instead.
Add a test that checks invisible objects are iterated over by the
`IO::AbstractHierarchyIterator` class, when a suitable depsgraph is given.
No functional changes.
Add a new depsgraph builder class that includes invisible objects and
use that in the Alembic exporter.
Alembic supports three options for visibility, "visible", "inherited",
and "hidden". This means that parents can be hidden and still have
visible children (contrary to USD, where invisibility is used to prune
an entire scene graph subtree). Because of this, the visibility is
stored on the transform node, as that represents the Object in Blender
and thus keeps the Alembic file as close to Blender's own structure as
possible.
Reviewed By: Sergey
Differential Revision: https://developer.blender.org/D8595
Rename test `alembic_tests` to `alembic_export_tests`, so that its name
is consistent with the Python file containing the tests,
`alembic_export_tests.py`.
No functional changes.
The paint cursor now uses a single call to
SCULPT_cursor_geometry_info_update and the Sculpt API to update both the
radius and the SculptSession data, so random access needs to be
initialized for dyntopo before using API functions.
Reviewed By: sergey
Maniphest Tasks: T79597
Differential Revision: https://developer.blender.org/D8489
When copying between a set RNA runtime property and an unset one, code
would not behave properly.
We have to also consider NULL 'override apply' callback pointer as a
valid 'use default override apply function' case.
Instead of checking for the length of a list, just handle the error that
occurs when the length is incorrect.
No functional changes to any actual test.
Currently, the search operator in the node add menu NODE_MT_add is drawn
even if no node categories exists. This patch only draws the operator if
at least one node category passes the poll.
This patch is needed because some add-ons use custom search operator and
do not register node categories. In this case, it is undesirable to have
a search operator drawn that do nothing and is not used. One such add-on
is Animation Nodes.
Reviewed By: Jacques Lucke
Differential Revision: https://developer.blender.org/D8576
The BLI_bitmap had the potential to eat a lot of memory as it was a
dense map between all the vertices in the mesh.
Now we instead use BLI_edgeset so that we only store data when needed
(creating a spare map instead of a dense).
In EEVEE the AO renderpass influenced other render passes. Until now the
pass wasn't selectable when AO was disabled in the scene to remove these
render artifacts.
This patch allows rendering EEVEE AO pass without enabling it in the
scene. It does this by binding a fallback texture that is used by the
surface shaders.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7956
This commit renames 'execute' to 'run' because:
- This follows Python's "PyRun" which these functions wrap.
- Execution functions can use either exec/eval modes,
making naming awkward (for future API refactoring).
This was committed as a temporary workaround in 82150f5641
as release builds were failing (only debug builds worked).
This adds `stdio.h` to the header which is now split into a file that
contains more specialized functionality.
Also move function body inside BPY_python_backtrace,
removing PyC_StackPrint as we have PyC_StackSpit() for
similar functionality that can be called from a debugger.
Checks for header alignment didn't account for tool-header & header
having different alignment.
There is no reason to use a lookup function on the area
(ED_area_header_alignment) as we already have region.
Check the regions alignment directly, remove access functions.
The existing header flip detection didn't account for mixed
tool-header and header flipping & visibility between space-types.
Now alignment syncing handles any combination of header,
tool-header & footer flipped state, in a way that can be extended
to other region types in the future.
By default boost::python in debug configuration links the release
python libraries. Which leads to loading issues with the produced
modules in a debug blender (which does use the debug python libs)
Bjam has an option to switch this to the debug libraries but when
you switch that on it changes the library names for *all* boost
libraries, even ones that don't have anything to do with python
and even the release libraries.
therefore an alternative way has been chosen and we're dealing
with this by adding a define rather than asking bjam to do it.
Many of these popovers could use a design pass in 2.91, but for 2.90 we
don't want to change any UI strings at this point, so the best way to
solve the cutoff text is to widen the popovers. Sadly this won't affect
popovers when other languages besides English have longer strings, but
solving that is a much larger task.
Another benefit is that tweaking sculpt / paint brush options feels much
less cramped with slightly wider popovers.
I only know of one string that is still slightly cutoff by default with
this patch, the "Max Element Distance" property of the pose brush in the
sculpt mode brush settings popover. But I didn't think it was worth
widening that popover more to deal with that one case.
Differential Revision: https://developer.blender.org/D8575
We have to explicitly enable fixed world space lighting. This was in
fact already done, but overridden by the code to sync the 3D View
shading settings to the VR view.
Mistake in cb578ca104. Before that, the extension vector was static,
to make sure the extension name strings wouldn't get destructed when
leaving the function. I didn't think that was an issue and couldn't
recreate one, because until the previous commit we wouldn't actually
add any extensions to the vector on Windows (the system I tested
with).
Use C++17's `std::string_view` now, which avoids the string copies
`std::string` creates for itself and thus its destruction when leaving
the local scope.
The OpenXR debug extension was disabled on Windows as a workaround. This
was an old leftover from when there was only the Windows Mixed Reality
runtime on Windows. The debug extension didn't work for it and we didn't
have a way to disable it just for Windows Mixed Reality.
Now it seems to work though, so we remove the workaround. If specific
runtimes still have trouble with the extension, we can disable it
specifically for these runtimes now.
Windows only workaround. I'll have to investigate Linux separately.
Steam's OpenGL compatibility is still new and doesn't work for us yet
(neither does it for standard OpenXR examples from what I've heard and
seen myself). We can work around that by falling back to our DirectX
compatibility layer.
Note that this DirectX compatibility still doesn't work for some
systems, see T76082.
Implementation note: Since the graphics binding extensions have to be
enabled before we can find out which runtime is in use (e.g. SteamVR vs.
Oculus, etc), we can now enable multiple graphics binding extensions but
settle for a single one to use later.
Once the SteamVR OpenGL backend works, we can remove this workaround
again.
Fixes T78267.
On VR session start with positional tracking disabled, the pose would
have an offset applied but it was supposed to start exactly at the
landmark position.
Issue is that we applied the offset to cancel out the position offset
reported by the OpenXR runtime incorrectly. We only want to do that if
positional tracking is enabled, because if not we don't even apply the
runtime's position offset. So we'd cancel something out that wasn't
there.
The new reverse iterators behave as the reverse iterators for contains from
the standard library. Have a look at the tests to see how to use them.
Using them will hopefully become easier with ranges in C++20.
A Vector can now be constructed from two iterators, which is very common
in the standard library.
New Vector.insert methods allow adding elements in the middle of a vector.
These methods should not be used often in practice, because they has a linear running time.
New Vector.prepend methods allow adding elements to the beginning of a vector.
These methods are O(n) as well.
* Avoid deep copy of vectors (technically more than a cleanup).
* Use `std::make_unique` for allocating unique pointers, rather than
manual `new`.
* Use `std::optional` for optional by-value return values, rather than
C-style `bool` to indicate success + return-argument.
* Use references rather than pointers for non-optional arguments.
* Avoid manual `new`/`delete`. Use `std::unique_ptr` for local scope
bound lifetime.
* Use C++ `nullptr` rather than C's `NULL`.
* Remove unnecessary friend declaration.
These changes are generally considered good practise and move us more to
a "modern C++" style. We can still go much further of course.
See https://isocpp.github.io/CppCoreGuidelines/CppCoreGuidelines.
Since DATA_PT_sculpt_vertex_colors has its own poll() we need to call
the poll() of MeshButtonsPanel as well
Differential Revision: https://developer.blender.org/D8563
This feature was removed during the refactor, but it's needed for this type of strokes to display the line using the stroke color without checking if the stroke is enabled or not in the material.
This color is used only for these special strokes.
This patch changes openvdb from a static to a dynamic library.
this is in preparation for enabling pyopenvdb at some point
in the future.
Differential Revision: https://developer.blender.org/D8282
Reviewed by: brecht
Many of the icons had lots of interior geometry left over from
subdivision. In these cases we should remove the interior geometry
and leave the object with the modifier for the future.
This icon mimics the details of the cloth brush icon while using the
frame style extablished for the other "filter" tools.
Differential Revision: https://developer.blender.org/D8467
This icon mimics the details of the cloth brush icon while using the
frame style extablished for the other "filter" tools.
Differential Revision: https://developer.blender.org/D8467
In this mode the preview image is always using the most of the preview
area space: it is scaled to fit, preserving aspect ratio. This makes it
possible to always have maximum of the preview region even after resize
of other areas.
This mode is enabled by default, is available in the View -> Zoom to Fit
menu. It is enabled when View All (Home key) is used, and is disabled
when manual navigation ([panning, zooming) is performed.
There is no versioning code, which means existing files will open as-is,
but new projects will have this option enabled.
Ref T78987
Maniphest Tasks: T78987
Differential Revision: https://developer.blender.org/D8549
Allows to hook per-space code which is to be run on view navigation.
This is required to have zoom-to-fit implemented in the sequencer.
There might be more cases where the clalback is to be called from,
but it could be easier to address those on the case-by-case basis
when its needed.
This changes the drawing paradigm a bit. The VAO configuration is done
JIT-style and depends on context active shader.
This is to allow more flexibility for implementations to do optimization
at lower level.
The vao cache is now its own class to isolate the concept. It is this
class that is reference by the GLContext for ownership of the containing
VAO ids.
We instead use a handle reference counter on the GPUVertBufs used by
the instancing batches. This make sure that if an update happens on the
GPUVertBuf used to contruct the batch, they will never have the same
memory address than the previously allocated ones (since they are still
pending deletion thanks to the refcounter).
This avoid the linear search to update the GPUBatch in the case a
batch is deleted (which was even a bad option since they could be only
cleared)
A handle refcount is here to avoid freeing of the GPUVertBuf datablock
if it is still referenced somewhere else.
This does not prevent deleting the actual data. This is to avoid too
much zombie data usage.
This is in order to avoid most hacks inside `draw_instance_data.c`.
It was impossible for drivers to use shape key properties, modifiers
generate a new mesh. After mesh evaluation the shape keys are no longer
necessary, and because of this the `key` pointer was not copied. As
drivers work on evaluated data, however, they do need this `key`
pointer.
This commit makes the `key` pointer available in evaluated meshes, but
this is somewhat dangerous. There was an explicit reason why the key on
result was kept at null pointer: to have the evaluated mesh in a
consistent state. Assigning this pointer makes it potentially
inconsistent, as the evaluated mesh and the original shape key may have
different topologies.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7785
It was always possible to set it to zero by typing in the value.
This new soft limit is more consistent with the fluid cache
and the Scene.frame_start property.
This was a regression in deaff945d0 which skips copying a mesh.
Dupli-verts/faces were not updated to account for this.
This supports iterating over edit-mesh vertices & faces,
since falling back to a full copy (as we do in some places)
will be slow while transforming geometry.
This commit looks as if it would change behavior with orcos,
since any edit-mesh deformation causes them to be assigned.
However in practice there is no functional change, details in comments.
Replace the evaluated mesh with VertexDupliData.mvert since only
vertices are used. This makes dupli-vert similar to how dupli-face
was already working.
When using constant falloff symmetry was working fine because the same
deformation is applied twice on the same vertices. When using no
constant falloffs, the deformation is different between symmetry passes,
so vertices need to be separated by symmetry areas to get the right
deformation from its symmetry pass without being overwriten by the next
one.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8541
This adds the boundary_falloff_type and boundary_offset to control how the
falloff of the Boundary Brush is applied.
Boundary Origin Offset is the same concept as the Pose Origin offset in
the Pose Brush. It is a multiplier that adds extra length to the brush
radius to locate the deformation pivot further from the boundary without
affecting the falloff.
The Falloff type includes Constant (previous default), brush radius, loop
and loop and invert. Loop and Loop and Invert can be used to create
deformation patterns in a mesh.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8526
If the File Browser was used in regular editor mode (e.g. not through an
operation like File > Open), the operator that usually opens files and
directories wouldn't execute. We need to keep two operators for
double-click in the keymap so selecting and opening works in all cases.
Caused by c606044157.
This adds support for panel categories to the instanced panel system
used for modifiers and others. The change is pulled from D7997 where
it is needed for FCurve modifiers, but it is unused now.
The change is simple and basically amounts to checking the panel
category where it was overlooked before.
This brush deletes displacement information of the Multires Modifier,
resetting the mesh to the subdivision limit surface.
This can be use to easily delete parts of the sculpt or to fix
reprojection artifacts after applying a shrinkwrap.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8543
This this adds the option of building boost::python
in the libs builder, in preparation for future
dependencies that require it (ie pyopenvdb)
disabled by default, can be enabled with the
`WITH_BOOST_PYTHON` cmake option.
Differential Revision: https://developer.blender.org/D8212
Reviewed by: brecht
Previously the way to use this operations was using the shortcut Ctrl +
W and Ctrl + Alt + W, which was not very discoverable and it was
limiting the amount of options that can be added to the operator.Now the
same functionality of the operator is available as a tool, which will
make easier to add other editing operations and options without adding
more entries to the keymap.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8545
The object "delta_" rna variables were not added to the depsgraph search
and thus it would not trigger updates of the object during animation
playback.
The object "delta_" rna variables were not added to the depsgraph search
and thus it would not trigger updates of the object during animation
playback.
DRW_render_set_time is calling RE_engine_frame_set will in turn calls
BKE_scene_camera_switch_update.
To workaround this, we get the original camera object at render init and
get the evaluated version from it after each time change.
This change how motion data are indexed inside the ghash.
We follow cycles closely now and use evaluated ID pointers.
By removing the hack, it fixes T78561 (No Motion Blur on linked objects)
This fix issues with instanced geometry and modifiers. Since the
depsgraph will duplicate the objects when they have different modifiers,
the evaluated object are garanteed to be unique.
If one of the operands of a binary operator a float, integer
operand gets promoted to float as well.
Differential Revision: https://developer.blender.org/D8552
For a locked shapekey, a SculptSession's orig_cos / deform_cos /
deform_imats are not initialized (they only are when
deform_modifiers_active is true -- this in turn is only true for
shapekeys if they are //not// locked [and for deforming modifiers of
course])
We can just update that keyblock with sculpt_update_keyblock() in case
of a locked shapekey
Maniphest Tasks: T79622
Differential Revision: https://developer.blender.org/D8499
Caused by rBfffba2b6530.
In above commit, the buttons rnaindex [-1 for entire arrays like colors]
was not used anymore for the entire function body of
`ED_autokeyframe_property` (previously in `ui_but_anim_autokey`).
Replacing the index with 0 (in the array case) is indeed necessary for
`BKE_fcurve_find_by_rna_context_ui`, prior to rBfffba2b6530 this was
taken care of by using `ui_but_get_fcurve` instead [which did this
internally].
But using an index of 0 (instead of -1) for the entire function body of
`ED_autokeyframe_property` fails for the array part later, namely
`insert_keyframe` needs -1 here.
Now just replace the index for //finding the FCurve//, but use the
original for //inserting the keyframe//.
Could be backported to 2.83 LTS.
Reviewers: campbellbarton, sybren
Subscribers:
The previous algorithm was not using all of the requested grids to build a mesh
around the volume due to limitations regarding the use of a dense buffer to
gather information about the volume's topology. This resulted in artefacts during
rendering.
The mesh generation is now done by merging all of the input grids and using the
resulting grid's topology to create the mesh. The generation of the mesh
is still done in index space as before, and the vertices are converted to object
space by using the merged topology grid indexToWorld transform.
To be able to merge the grids together we have to make sure that their transformation
matrices and their index spaces match, thus, if they do not match we simply resample
the grids. This behaviour should tackle one other limitation of the current algorithm,
which is that only one transformation matrix was used to generate the final mesh.
If we do not have an OpenVDB grid for the requested volume data, we generate
a temporary OpenVDB grid for it.
Differential Revision: https://developer.blender.org/D8401
Now the one vertex defines the position of the UV chart, while rotation and
shape is still determined automatically.
Initial patch by Willis (wlssirius).
Differential Revision: https://developer.blender.org/D8484
This is particular important because 2.90 will coexist with 2.83 LTS, so
we should warn the users of potential loss of data when going from 2.90
to 2.83 and back.
Differential Revision: https://developer.blender.org/D8488
Those where assuming we always get a valid modifier data from context,
which is not always true...
Also fix similar issue with shortcuts as reported in T79635.
It is unfortunate that we cannot get active modifier from context when
operator is called from a shortcut, but we'd need an event for this to
work... So for now forbid any modifier operation of liboverride objects
in that case.
'VIEW2D_OT' operators were not respected in WM_keymap_guess_opname().
This was seemingly done on purpose (see comment "Op types purposely
skipped for now"), but dont really see the reason for doing so.
Since the "View2D" keymap is not bound to a specific spacetype, we can
still find it using WM_keymap_find_all() [and passing 0 as spacetype].
Reviewers: Severin
Subscribers:
Vert-only mesh is valid input for the skin modifier (displays isolated
cubes), prevent error message about missing root vertex in that case.
Maniphest Tasks: T79700
Differential Revision: https://developer.blender.org/D8533
saving with 'Remap Relative' option
Caused by rBf7386b97571e.
Logic in BKE_bpath_traverse_main calls the callback multiple times [as
often as there are images in the strip].
Prior to above commit, the callback was
'bpath_relative_convert_visit_cb' [this one did not have this problem -
since it returned early if the path was already made relative once]
After rBf7386b97571e though, the 'bpath_relative_rebase_visit_cb' is
used [this one should not be entered multiple times, it would modifiy the
directy again and again].
Luckily, we have a flag (BKE_BPATH_TRAVERSE_SKIP_MULTIFILE) that can be
used to prevent this (this will take care of only calling the callback
once in BKE_bpath_traverse_main for the VSE case)
Could be backported to 2.83 I think.
Maniphest Tasks: T79676
Differential Revision: https://developer.blender.org/D8536
This commit generally moves variable declarations to the smallest scope
the variables are used in. This makes the code more readable by
making it clearer when variables are used and by removing the block
of variable declarations at the top of each function.
This change makes the generated points a light dimmer than selectable points.
Before:
{F8765593}
After:
{F8765585}
Maniphest Tasks: T79683
Differential Revision: https://developer.blender.org/D8515
This options allows to perform Face Sets operations while preserving the
mesh visibility. Edit hidden face sets is enabled by default in order to
expand the visible area of the mesh with the grow/shrink operator, but
this can be changed in the keymap per edit operation as more operations
are supported.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8029
Old and new collections are the same data in Master collection case
here, so we cannot consider the `gobject` listbase of `collection_old`
as always immutable.
This commits:
- Updates some libraries to latest officially supported versions:
** Numpy: 1.17.5
** OCIO: 1.1.1
** OIIO: 2.1.15
** OSL: 1.10.10
** OIDN: 1.2.1
- Re-enables some distro packages (like OSL, OIIO, OCIO...).
- Add missing 'CMake cleanup commands' for generated CMake update
command, for Embree, OIDN and OpenXR.
- Generalizes using min/max versions of accepted libraries, if no
package can be found in specified range then it is built from sources.
The later point should help keeping things a bit in better conditions,
although current maximal accepted versions are somewhat arbitrary guess
currently.
The preview of points was only done when the edge is wire.
Now the preview of points is done when the edge is not connected to any
quad.
Also to avoid edge slide in this case, all new vertices created in this
specific case are not selected.
Differential Revision: https://developer.blender.org/D7457
Is not only the values of translation/scale/rotation which are to be inverted,
but also the order of operations.
Differential Revision: https://developer.blender.org/D8518
This reverts commit 9adedb2605. It changes
how duplis work, and by that altered how Alembic and USD files are
written. This was signalled by a failing Alembic unit test.
Now the operators are split to define different default values. This is also required for the future Bezier primitive tools.
This allows to show in the Topbar the number of subdivisions. Before this value was totally hidden and it was number of Edges. The wheelmouse can be used to override the value while running, but does not change the default value.
{F8766270}
All operators share same code.
Also, fixed some bad practices done with Toolbar in python.
Reviewed By: mendio, pepeland
Differential Revision: https://developer.blender.org/D8506
Mainly caused by moving tests to source folder, which brings
new compiler flags.
Also, no need to extend include directories (to the non-existing paths,
btw) since this is done by the CmakeList.txt which is in the blenlib folder.
Solves possible pointer-based comparison fiasco.
Another nice outcome of this is that topology cache will now be
preserved throughout the undo system. For example, undo of object
transform will not require topology cache to be re-created.
Differential Revision: https://developer.blender.org/D8493
The file was including BKE. It was a required fix for another
compilation error a while back. It is a bad level include, and
seems is not needed anymore.
The problem here is that the baking code uses tiles to exchange pixel data with
the renderer since a recent-ish refactor, but the code that sent data to the
renderer did not initialize the bake result pixels.
Therefore, when the baking process for the second object started, Cycles
received empty tiles and sent them back as-is if the second object did not
cover them.
By initializing the tiles with the result of the previous bakes, we avoid this
problem.
We can't exactly follow what we do for macOS here. On Windows special
characters can be inserted with Ctrl+Alt. So make sure we expect UTF-8
characters when Alt is held.
Mistake in 87062d4d67.
Since C++17 there is also std::string_view, which is similar to StringRef.
This commit does a couple of things:
* New implicit conversions between StringRef and std::string_view.
* Support std::string_view in blender::DefaultHash.
* Support most of the methods that std::string_view has.
* Add StringRef::not_found which can be used instead of -1 in some places.
* Improve/fix the description at the top of BLI_string_ref.hh.
And make them part of the blender_test runner. The one exception is blenlib
performance tests, which we don't want to run by default. They remain in their
own executable.
Differential Revision: https://developer.blender.org/D8498
This adds a property that checks the normals of each vertex against the
view direction to decide if they should be masked (similar to the
"Front Faces Only" option works for brushes.
Reviewed By: sergey
Maniphest Tasks: T77637
Differential Revision: https://developer.blender.org/D8448
This brush includes a set of deformation modes designed to deform and
control the shape of the mesh boundaries, which are really hard to do
with regular sculpt brushes (and even in edit mode). This is useful
for creating cloth assets and hard surface base meshes.
The brush detects the mesh boundary closest to the active vertex and
propagates the deformation using the brush falloff into the mesh.
It includes bend, expand, inflate, grab and twist deform modes.
The main use cases of this brush are the Bend and Expand deformation
modes, which depend on a grid topology to create the best results.
In order to do further adjustments and tweaks to the result of these
deformation modes, the brush also includes the Inflate, Grab and
Twist deformation modes, which do not depend that much on the topology.
Grab and Inflate are the same operation that is implemented in the
Grab and Inflate tools, they are also available in the boundary brush
as producing deformations with regular brushes in these areas is very
hard to control.
Even if this brush can produce deformations in triangle meshes and
meshes with a non-regular quad grid, the more regular and clean the
topology is, the better. Most of the assets this brush is intended to
deform are always created from a cylindrical or plane quad grid, so it
should be fine. Also, its algorithms can be improved in future versions
to handle more corner cases and topology patterns.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8356
Proper handling of View Layers for the VR session was never implemented.
Now the View Layer of the VR session follows the window the session was
started in.
Note that if this window is closed, we fallback to another window. This
is done to avoid the overhead it would take to maintain a separate
depsgraph for the VR view. Instead we always share some already visible
View Layer (and hence the depsgraph).
The problem is caused by a lack of prediction in the `isect_line_segment_tri_v3`
that incorrectly confirms some intersections of coplanar segments to the triangle.
The solution is to use another algorithm to detect intersections.
This also resulted in a slight improvement in the performance:
- 1min 17sec to 1min 6sec in my test file
Differential Revision: https://developer.blender.org/D8500
Root of the issue was not fixed in 2.90, only hidden by the fact that we
now re-read much less data during undo's that we used to, when some new
datablock gets added or removed.
This is not an ideal solution (as usual when dealing with data pointers
shared across data-blocks), but it's decent enough. thanks a lot to
@brecht for it!
To be backported to 2.83 too.
We want the session to start exactly at the landmark position, with
no additional offset. Some runtimes (e.g. Windows Mixed Reality) may
give an initial non-[0,0,0] position at session start though.
Also add a comment explaining the purpose of the eye offset variable.
There would always be an unintended offset applied. Per design there
should not be any offset when changing VR Landmarks, the view should
just jump exactly to the Landmark.
Due to the recent changes, we don't have to add, but substract the eye
offset we apply to get the wanted behavior.
Mistake in 607d745a79.
We want the session to start exactly at the landmark position, with
no additional offset. Some runtimes (e.g. Windows Mixed Reality) may
give an initial non-[0,0,0] position at session start though.
Also add a comment explaining the purpose of the eye offset variable.
There would always be an unintended offset applied. Per design there
should not be any offset when changing VR Landmarks, the view should
just jump exactly to the Landmark.
Due to the recent changes, we don't have to add, but substract the eye
offset we apply to get the wanted behavior.
Mistake in 607d745a79.
This does not fix all the cases in the bug report, because there are multiple
different issues. Only the first two are fixed. The third is probably a known
issue for now.
Before this patch, the rigid body simulation was always done after modifiers
are evaluated, because to perform the simulation, the final geometry of the
object was required. However, the geometry is not required in all cases,
depending on the selected collisions shape.
This patch changes it so that when the simulation does not need the
evaluated geometry, the simulation will be done before the modifiers
are evaluated. This gives the modifiers access to the simulated positions.
When the rigid body simulation does depend on the evaluated geometry,
it will still be performed after modifiers are evaluated.
The simulation will be performed after modifiers are evaluated, iff
the collision shape is "Convex Hull" or "Mesh" and the source is set
to "Deform" or "Final".
Reviewers: sergey
Differential Revision: https://developer.blender.org/D8487
In last set of refactoring patches, code implementing this feature
has been accidentally removed.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8449
This just set a global object responsible for allocating new objects
in a thread safe way without needing any GPUContext bound to this
thread.
This also introduce the GLContext which will contain all the GL related
functions for the current context.
# Conflicts:
# source/blender/gpu/intern/gpu_context.cc
This just set a global object responsible for allocating new objects
in a thread safe way without needing any GPUContext bound to this
thread.
This also introduce the GLContext which will contain all the GL related
functions for the current context.
For the main rationale behind this design, see 49f088e2d0. Further,
this removes users of uiBut.a1, which is a very ugly design
choice (hard to reason about).
Part of T74432.
Fix package name missmatch in a few module files. IE "ALEMBIC" was
defined in the file but the find_package commands used "Alembic"
Some modules state that they set and use the _LIBRARY variable but the
do in fact not do this. Removed these comments from those files.
Enable Clang-Tidy's `readability-function-size` rule and add a few
`NOLINT` markers to explicitly silence warnings for three functions.
These functions are huge and would IMO benefit from splitting up, but
are hard to without intimate knowledge of the code.
At least by enabling the rule, we can start tweaking the values and
refactoring other functions that bubble up as being too long/complex.
No functional changes.
Add a `NOLINT` marker to explicitly silence a warning from Clang-Tidy's
`readability-function-size` rule for the `node_type_base()` function.
This function is indeed huge, but that is because a lot of macros are
expanded. Before expansion things are still not small, but still
understandable & expandable.
No functional changes.
In the 3D View, the "Animation" keymap is not used, but the mode
specific ones. So the shortcut editing code should use these too, just
like the default keymap does.
This adds a `NOLINT` marker to explicitly silence a warning from
Clang-Tidy's `readability-function-size` rule for the `incircleadapt()`
function in `delaunay_2d.c`.
No functional changes.
This adds `NOLINT` markers to explicitly silence warnings from Clang-Tidy's
`readability-function-size` rule for versioning functions. Technically
these could be refactored and split up into smaller bits, but generally
they are hardly ever looked at once they're a few releases old.
No functional changes.
This addresses warnings from Clang-Tidy's `readability-function-size`
rule in the `source/blender/python` module.
It's just `BPyInit_bgl()` that's been split up into one or two smaller
functions per OpenGL version.
No functional changes.
For the main rationale behind this design, see 03b122e2a18df. Further,
this removes users of `uiBut.a1`, which is a very ugly design
choice (hard to reason about).
Part of T74432.
For the main rationale behind this design, see 03b122e2a18df. Further,
this removes users of `uiBut.a1`/`uiBut.a2`, which is a very ugly design
choice (hard to reason about).
Part of Part of T74432.
The current on-size-fits-all `uiBut` creates quite a mess, where it's
hard to reason about which members are free for use, under which
conditions they are used and how.
`uiBut` also has members that aren't used at times, violating the "don't
pay for what you don't use" principle.
To address this, we want to move to typed buttons, where `uiBut` is just
a base struct and each type extends it as needed. That structures data
better and type specific data is only available if it's actually used by
a button type.
Two trade-offs:
* Many casts to the derived type have to be done.
* Sometimes we change the button type after it's created. So I had to
add logic to reallocate the button for use with the new, possibly
derived struct. Ideally that wouldn't be needed, but for now that's
what we have.
Part of T74432.
Differential Revision: https://developer.blender.org/D7610
Reviewed by: Brecht Van Lommel, Campbell Barton
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule. This should be the final commit of the series of commits that
addresses this particular rule.
No functional changes.
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/draw` module. Not all warnings are addressed
in this commit.
No functional changes.
Clicking on the column header is supposed to enable sorting by this
column, or switch the sort order if already enabled.
The double-click event would be blocked by the `file.execute()`
operator, which is not supposed to act if the user clicked outside the
file list.
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/blenlib` module. Not all warnings are
addressed in this commit.
No functional changes.
This replaces header include guards with `#pragma once`.
A couple of include guards are not removed yet (e.g. `__RNA_TYPES_H__`),
because they are used in other places.
This patch has been generated by P1561 followed by `make format`.
Differential Revision: https://developer.blender.org/D8466
Follow path seems to not be catched by `BKE_object_moves_in_time`.
For this reason, we cache all transforms for all object and check
ourselves if an animation occurs. This is almost what cycles does.
We also fix the rigid body case if the rigid body use deformation.
The Pose FK mode assings the rotation origin to the boundary of the last
visited face set in the floodfill operation. In some cases, the topology
of the model may make the flood fill operation to visit a face set as the
first one (assinging it to target) and visit it again as the last one
(assinging it to origin). This will make the pose brush to default the
origin and target to the brush location and not to the face sets as it
considers that there is only one possible boundary.
This adds a GSet to ensure that a particular face set is not visited
twice in the flood fill, fixing these cases.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7984
This makes possible to choose between a local and a global simulation
when the cloth brush is used. Local simulation is the current default.
When global simulation is enabled, the cloth brush simulates the entire
mesh without taking any simulation limits into account.
This was possible before by setting the simulation limits to 10 (the
current maximum value allowed) so the entire mesh was inside the limits,
but this was a hack as the limits scale with the radius and there should
not be any limitation on how big the simulated area can be to be able to
simulate an entire object. This also allows to make a more clear
distinction between cloth brush presets that are intended to be used in
local areas to add details or globally to generate the base shape of the
mesh.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8481
This patching duplicates the first frame of the layer if the first frame number is not equals to the scene first frame number.
Related to T79567
Differential Revision: https://developer.blender.org/D8486
Some minor cleanup in the patch.
The paint_draw_cursor function was handling the cursor drawing for 2D
and 3D views of all paint modes, calculating the brush radius, updating
the SculptSession data and updating and drawing all sculpt cursor
overlays for different tools. It was almost impossible to understand when
and what was being drawn and in which state the GPU matrix was.
Now everyting is organized into different functions, with clear
separation between modes, sculpt tool overlays and different drawing
setups. Update and drawing functions are also separated (this allows to
skip one PBVH query on each cursor drawing).
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8206
The current code is accessing this from outside the gpu "namespace". As
such it should be accessing GPU_ functions, not gpu_ functions.
This is also a place to centralize the XXX message that will be
addressed upon refactor. So we can reuse this call in other places that
need the same temporary workaround.
Groundwork for upcoming fix (D8472)
In an upcoming bugfix we'll use OpenVDB data structures directly to build mesh
for sparse OpenVDB volumes, loading them OpenVDB grids earlier and removing any
references to Blender data structures makes that easier.
This also makes changes to Blender volumes to support this, so Cycles can take
ownership of a grid without Blender having to keep its own reference to it.
This should also be useful in a future Python API.
Ref D8401
Small tweaks to make labels and texts more correct, consistent and
polished.
Reviewed by: Aaron Carlisle, Julian Eisel
Differential Revision: https://developer.blender.org/D8346
Having includes in debug builds makes it possible to accidentally
break release builds.
Avoid this by moving calls to other modules out of BLI_assert.h
into BLI_assert.c
When adding multiple force fields of different types they are all called
"Field", making it difficult to tell them apart.
Lights were already named based on their type. This follows the light
code.
New names:
- Force
- Vortex
- Magnet
- Wind
- Guide
- TextureField
- Harmonic
- Charge
- Lennard-Jones
- Boid
- Turbulence
- Drag
- Fluid
- Field
Reviewed by: Julian Eisel
Differential Revision: https://developer.blender.org/D8420
Similar to T58668, labels were not aligned when multi-editing widgets
that are not center-aligned.
Reviewed by: Hans Goudey, Julian Eisel
Differential Revision: https://developer.blender.org/D8441
Align items in the edit mesh context menus (reducing padding), for
consistency with other menus.
The root layout of menus doesn't add the padding, for sub-layouts
`align` has to be enabled.
{F8749633}
Reviewed By: Julian Eisel
Differential Revision: https://developer.blender.org/D8480
This seems to be caused by a change to the logic of movieclip_get_gputexture_ptr in rB97b597c.
Differential Revision: https://developer.blender.org/D8469
This implements collisions in the solver of the cloth brush/filter. It
uses the scene colliders as a regular physics simulation.
There are still some parameters (friction, distance to the surface...)
that can be exposed as properties in later patches.
Thanks to Sebastian Parborg for helping me with the implementation.
Reviewed By: sergey, zeddb
Differential Revision: https://developer.blender.org/D8019
The panels are rebuilt when a modifier is removed so the button handlers need
to properly finish. By adding a context argument to the panel_delete function
this will happen properly.
This adds a curvature smoothing and intensify details properties to control
the result of the Sharpen Mesh Filter.
Curvature smoothing removes high frequency details from the precalculated
sharpen data, so the filter result has much smoother surfaces and cleaner
sharpen lines;
Intensify details displaces the vertices of creases and valleys in the direction
opposite to its neighbors average, so it intensifies high frequency details
in those areas, producing more noisy and sharp shapes:
Both this properties can be used in combination to achieve a good balance of
high and low frequency details depending on the shape and the desired result.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8447
Previusly it was using the / character, which implies that there is one
deformation mode and and invert deformation mode like in the other two
deformation, but squash and stretch is only one deformation mode and
does not have an invert mode.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8463
The scale deform mode includes rotation by default, so when when scaling
down a part of the models it becomes harder to control as the effect of
the rotation less predictable (similar to using trackball rotation in a
very small radius). This locks the rotation of the segment, so parts of
the model can be scaled down in a more predictable way.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8465
Steps to reproduce were:
* Open File Browser
* Create a new directory
* Cancel renaming with Esc
File selection flags were modified during drawing when the rename button
got removed, but the file name label drawing wasn't checking the
modified state.
The file.execute() operator is the one that actually opened directories
and files, not file.select() with the "open" option, as it was assumed
when changing the keymap to double-click for opening. It only acts on
the current selection though, so we have to ensure the selection is set
on the first click.
Now, some touch-pads have a delay until they register a click event, so
the double-click would be registered instead, before the selection is
set. Always select on mouse-down now and remove the unnecessary select
operator call on double-click.
The crash is caused by the fact that a NULL Object pointer is passed to
calculate the transform orientation, which has been set to normal.
A check has been include to detect the same.
Differential Revision: https://developer.blender.org/D7951
Use `td->iloc` as the coordinates of the transformed element.
It is more accurate and other transformation modes, such as scale, also
operate on `td->iloc`.
The icons are label buttons. Usually these are not editable and can not
become active. These are draggable ones though (so dragging files can be
dragged by dragging the icon) which creates an exception to this rule.
So hovering the icon would activate its label and when executing the
rename operator via shortcut it wouldn't get exited properly. This broke
the invariant of only allowing a single active button at a time.
Added an assert to check that invariant now.
Letting the code to activate the text button ensure any currently active
button is exited seems sensible.
When disconnecting links for defaulted node group inputs, recurse
into the nested node group nodes, instead of checking the socket
flag. Otherwise the behavior is confusing and differs from Cycles.
Differential Revision: https://developer.blender.org/D8455
Disabled buttons would incorrectly toggle state when a drag toggle
passed over them. This adds a check to prevent a drag toggle on disabled
buttons.
Differential Revision: https://developer.blender.org/D8476
The `rna_Scene_ray_cast()` function tried to find the current depsgraph. To
this end, it required the scene, the view layer, and bmain. Scene has a cache
of per-view-layer depsgraphs, to speed up switching between view layers. This
cache does not contain render depsgraphs, and evaluated view layers also don't
have a depsgraph here.
When a suitable depsgraph cannot be found, a new depsgraph is created. However,
this depsgraph is not evaluated, and has an unexpanded scene pointer with a
`NULL` `view_layer`. Using this then crashes Blender. Also, there was no way
for the code to get the render depsgraph.
The solution is to pass the depsgraph to the `ray_cast()` function, instead of
the view layer. This avoids the depsgraph lookup, and also works correctly when
rendering.
Some add-ons also need updating, which I'll do in the `addons`
repository soon.
Reviewed By: Sergey
Differential Revision: https://developer.blender.org/D8475
This uses the vertices per grid instead of quads to set the limit of
grids per PBVH Node. This should create more leaf nodes in lower
subdivisions levels where the duplicates count is high, producing more
uniform performance across different levels.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8454
There were two issues. First, I made a mistake when I switched from unsigned
to signed integers. Second, two classes with the same name were defined in
separate files. Those classes are in an anonymus namespace now, so that they
don't leak into other files.
ad4928a171 disabled alignment for too many cases. Still try to avoid
aligning many items, to avoid thousands of redundant alignment
calculations. But now we're much more picky adding an sub-row with
alignment.
On windows, spacebar would be passed as UTF-8 text input, despite the
control key being pressed. On macOS, there already was an explicit
exception for this (command key in this case), on Linux XInput already
handled this case for us.
Note that Alt should still allow text input, for special character
sequences.
Issue also happened in the Text Editor if a text data-block was set.
Optimization was disabled in this function to work around a bug in MSVC, use
a different solution that does not come with such a big performance regression.
In Blender 2.90 EEVEE materials were refactored that introduced crashes on Intel
GPUs on Windows. The crash happened in the `local_context_workaround` that temporary
stored compiled materials in a binary form to reload it in the main GL context.
It has been tested that the workaround isn't needed anymore for HD6xx GPUs, but it
is still needed for HD4000.
After several unsuccesfull fixes we came to the conclusion that we could not support
the local context workaround and needed to come with a different workaround. The idea
of this patch is that in these cases there is only a single context that is used for
rendering. Threads that uses these contextes are guarded by a mutex and will block.
Impact on User Level:
* Due to main mutex lock the UI freezes when rendering or baking or feel less snappy
Reviewed By: Clément Foucault, Brecht van Lommel
Differential Revision: https://developer.blender.org/D8410
As far as I can see, this problem was introduced with the gpu_free_unused_buffers() changes in rB97b597c.
The code checks the returned pointer to stop looping, but the last iteration will return the last GPUTexture and set the queue to NULL, meaning that the next pop() will crash.
Differential Revision: https://developer.blender.org/D8468
Some implementation have different maximum texture size.
This patch avoid crash when texture allocation fails when:
- trying to bake a lightcache too big for the OpenGL imeplementaion.
- loading a cache from file that is too big for the OpenGL imeplementation.
Face Sets where only set and updated on the PBVH after starting a sculpt
tool. In order to preserve the visibility they store when changing
levels, they need to be updated and sync also on PBVH creation
Reviewed By: sergey
Maniphest Tasks: T78665
Differential Revision: https://developer.blender.org/D8225
Duplicates of a grid corner adjacent to an edge which are on the
adjacent grid of the same face were not added when requested.
Needed for D8356 to work, it may also fix some other bug in Multires.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8385
The cloth brush has a defined simulated area with a falloff. In the falloff
area (the area between the dashed white circle and the exterior white
circle), simulation properties change in order to fade out the
simulation deformation effects towards the boundary.
With some brushes and stroke types (like anchored strokes with pinching
or grabbing with full strength), it is possible to apply more force than
what the boundary falloff can compensate, so the simulation breaks when
this happens.
This option pins the falloff area with softbody constraints, This
produces a much better deformation falloff and it is no longer possible
to move the vertices near the simulation boundary, so the simulation
won't break no matter the strength of the forces applied inside the
simulated areas.
This is an option as it is particularly useful for some brushes to add
localized details, but for brushes that are supposed to deform the
entire mesh (like the grab brush in D8424), this can add unwanted
softbody constraints that affect the simulation result.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8435
Box mask is not a selection, so it should not be part of the select
operator. This allows to add more sculpt mode specific functionality and
properties and to share more code with the lasso mask operator in a
later refactor.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8456
When switching workspaces we need to have an unused screen layout that
we can activate. The other window now showed the only available screen
layout in fullscreen though.
Usually when there's no unused screen layout we duplicate an existing
one, but that code didn't respect the fullscreen case properly.
This also tries to clean up the logic a bit, but things are still rather
complicated to follow.
Changes in this code are always risky. Of course things worked fine in
my tests, but I wouldn't be surprised if something breaks.
Filtering Collections when also filtering object children would only
display the parent object. Add a check for the NO_CHILDREN filter before
creating the object-parent hierarchy.
The winding order of the faces changes when flipping the faces.
This lead to the loop indices changing as well.
Now we take this into account when restoring and flipping the custom
normals. Before the normals would be swapped.
The winding order of the faces changes when flipping the faces.
This lead to the loop indices changing as well.
Now we take this into account when restoring and flipping the custom
normals. Before the normals would be swapped.
The problem in this case was that the flag for active fire was not set. With hidden flow sources the flag was not updated in update_flowsflags().
The solution for this is to take the active field from the config cache file.
Previously a for loop with two iterations was used to calculate the
3D segment locations for the input number and the higher power of 2.
Splitting off the inside of the for loop to a separate function makes
the code more readable.
This commit also includes a simple timer for bevel, enabled with a
define. Interestingly, the cleanup in this commit happended to give
a 3% speedup on a Ryzen 3700x for a bevel calculation with 64
segments.
Same exact system as instancing on vertices for a mesh. More powerful ways
of instancing will be added at some later point, but this makes the basics
works and is consistent with other geometry types.
The tests were broken because of an extra call to
RNA_def_struct_name_property which set the name of the velocity
attribute to be the string used to identify CacheFiles in
bpy.data.cachefiles.
When changing the material while the properties editor temporarily isn't
visible (e.g. because another editor is in full-screen or a different
workspace is active), the preview wouldn't be updated on changes.
Always trigger a material preview update on screen layout or editor type
changes.
When changing the material while the properties editor temporarily isn't
visible (e.g. because another editor is in full-screen or a different
workspace is active), the preview wouldn't be updated on changes.
Always trigger a material preview update on screen layout or editor type
changes.
The data member `new` was conflicting with the `new` keyword
when `BKE_screen.h` was included in C++ files.
Reviewers: sergey
Differential Revision: https://developer.blender.org/D8459
Caused by rB63ee3db96107.
While above commit corrected the clip offset, it also removed logic to
ensure a marker on a particular frame. This is needed though, otherwise
changes on a particular frame are applied to the marker being returned
by 'BKE_tracking_marker_get' which can be a completely different marker
if none exist for that frame yet.
This patch partly reverts rB63ee3db96107 and reintroduces the framenr
for the MarkerUpdateCb and uses that to ensure a marker on that frame.
Candidate for backporting to 2.83 LTS?
Reviewers: sergey, jacqueslucke
Subscribers:
Before: If the current frame is out of the cache start/end range, the viewport will show the fluid as it was on the last frame that was still in the cache frame range.
Now: If the current frame is out of the cache start/end range, the viewport will show no fluid at all (even if there are cache files present for this frame).
This fix is related / in response to T79423.
The decomposed transform would have consists of nan values if the input
transform had zero scale.
Now the decomposition will check for zero scale, and if it is detected
then the result will be ensured to be finite. Additionally, rotation
value will be copied from previous/next time step to help avoiding
obscure interpolation.
The latter step can become more comprehensive than the current simple
implementation.
Differential Revision: https://developer.blender.org/D8450
This will make it easier & cleaner to make custom-built depsgraph (for
example for exporting invisible objects to USD or Alembic, see T75936).
No functional changes.
Reviewed by: sergey
Differential Revision: https://developer.blender.org/D8423
This flag specifies that even when the socket is not connected,
the node should not display the input field for the constant input
value. This is useful for inputs like Normal, which have special
handling for the missing input case and don't use a constant value.
Currently there is no way to change this flag from Python, and
through UI it can only be done by re-creating the socket.
This patch exposes the flag through RNA and UI, makes sure it
is properly updated when changed, and adds special handling to
ensure that it is correctly set when creating a node group from
a node set that includes reroute nodes.
Differential Revision: https://developer.blender.org/D8395
Instead of assuming the node width, compute the actual right bound.
Otherwise BSDF nodes tend to be too wide, and intersect Output.
Differential Revision: https://developer.blender.org/D8395
Avoid the conversion for the hook modifier as riggers
may need to enable this modifier in edit-mode.
The speedup of the modifier alone is significant since the hook
operation is simple compared to conversion that took over 99.9%
of the time in my tests, however the overall speedup was around to 1.6x.
The bevel code initialized the CurveProfile with the "higher power of 2"
segments after the normal number of segments, leaving the widget in an
incorrect state after the calculation. A simple fix is to re-order the
initializations, doing the input number second.
'Default' actually means 'Keep Existing' and it makes more sense to
display the more descriptive label.
Differential Revision: https://developer.blender.org/D7614
Fixes T78346.
The shortcut display and change code is context sensitive. To make it
work correctly the context needs to be set properly.
When executing operators from the dropdowns, the active region is the
header, but the shortcut handlers are set for the main region. So make
sure that is used instead.
This also sets the main region active for context menu operators, where
this issue shouldn't be present. Doing it anyway shouldn't hurt though
and fixes this issue in case somebody displays the context menu in the
header as dropdown too.
Instead of clearing forces at the end of the simulation step, they will now be cleared before writing to them, i.e. at the beginning of a step.
Also cleaned up minor areas that I looked at while making this change.
Following work done in 2.83, the resolution control is now a real
level-of-detail parameter. It is now useful to be able to set the
resolution for display independently from render. This is true for
both mesh generation and mesh deformation modes.
For compatibility with old scenes, resolution is retained and is the
render resolution. Old modifiers loaded have the value of resolution
also applied to viewport resolution. This allows newer modifiers to
be used in older versions without trouble
Differential Revision: https://developer.blender.org/D8336
The text colors set by the general widget state function
(`widget_state()`) would always be overriden by the menu-back text
colors to avoid contrast issues. This would only respect the selected
state, not other states.
Address this now by changing the input theme colors to use the menu-back
ones, rather than overriding after the fact (calling `widget_state()`).
Changing the surface distance through the flow type is inappropriate here. It had been added to ensure that liquids / smoke use a different emission value.
Now the value will only be changed when changing from a gas to a liquid emitter or, vice-versa, when changing from a liquid to a gas emitter.
There is a parameter typo in Python API document about bpy.props.StringProperty.
This patch fixes this.
Also this patch should apply to 2.90 branch as well.
Reviewed By: Grische, mont29
Differential Revision: https://developer.blender.org/D8430
Code required the tabs to be placed in an aligned region. Code should
work fine even for unaligned regions though, so I don't see a reason to
forbid this.
This patch adds the ability to render motion blur from Alembic caches.
The motion blur data is derived from a velocity attribute whose name has
to be defined by the user through the MeshSequenceCache modifier, with a
default value of ".velocities", which is the standard name in Alembic
for the velocity property, although other software may ignore it and
write velocity with their own naming convention (e.g. "v" in Houdini).
Furthermore, a property was added to define how the velocity vectors
are interpreted with regard to time : frame or second. "Frame"
means that the velocity is already scaled by the time step and we do not
need to modify it for it to look proper. "Second" means that the unit
the velocity was measured in is in seconds and so has to be scaled by
some time step computed here as being the time between two frames (1 /
FPS, which would be typical for a simulation). This appears to be
common, and is the default behavior.
Another property was added to control the scale of the velocity to
further modify the look of the motion blur.
Reviewed By: brecht, sybren
Differential Revision: https://developer.blender.org/D2388
The hardcoded age limit is now gone. The behavior can be implemented
with an Age Reached Event and Kill Particle node. Other utility nodes
to handle age limits of particles can be added later. Adding an
Age Limit attribute to particles on birth will be useful for some effects,
e.g. when you want to control the color or size of a particle over its
life time.
The Random Float node takes a seed currently. Different nodes will
produce different values even with the same seed. However, the same
node will generate the same random number for the same seed every
time. The "Hash" of a particle can be used as seed. Later, we'd want
to have more modes in the node to make it more user friendly.
Modes could be: Per Particle, Per Time, Per Particle Per Time,
Per Node Instance, ...
Also a Random Vector node will be useful, as it currently has to be
build using three Random Float nodes.
Find free slot first for sound strips then for movie strips.
This patch also fixes issue where all strips were added to channel 2 by default.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8339
As creator.c is used for the 'main' function,
avoid obscure declarations being placed so prominently.
- Move Blender as a Python module declarations into it's own section.
- Move USD declaration to an 'extern' just before it's called.
Previously, there were only particle-birth and time-step events.
Now the solver can handle custom events. On the user level
this does not change anything yet. This feature of the solver
will be used by an upcoming Age Reached Event node and
possibly others. When this node exists, I can finally remove
the hardcoded maximum particle age.
The abbreviation 'init' is brief, unambiguous and already used
in thousands of places, also initialize is often accidentally
written with British spelling.
Yet another update to ensure that pointer variables are always up to date, i.e. those referencing the memory allocated by Mantaflow. Outdated pointers usually show up through flickering in viewport.
The weight must be added only to the real points, not to the autogenerated points by modifiers. This affects, not only to subdivide, but to any modifier that generate points.
In f2b04302cd the pointer update was refactored. It was sufficient to update pointers just in replay mode at the end of a step since the 'ensure()' functions from manta_fluid_API.cpp had their own pointer update call. These were removed in 51f4bee5a5, however, and so in order to still have some sort of update, the given update call needs to be available to all cache types.
Required for the new boolean code, disabled by default
until all platforms have landed the libs and the boolean
code actually lands in master.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8384
Caused by c7aa0f9d74.
Since above commit, BKE_image_user_frame_calc requires an image (not
just the iuser) to get the framenumber.
Cycles used to call this with NULL image (in `image_user_file_path` and
`image_user_frame_number`), now pass the image as well.
Maniphest Tasks: T79111
Differential Revision: https://developer.blender.org/D8439
A collection of multiple changes that had been living in my stash:
- Use nullptr instead of NULL in C++ files
- Removed unused/deprecated functions from headers
- Cleared animatable flag in cache UI
- Comment cleanups
Use static_cast() where possible and refresh pointers for every frame when in replay mode. The latter is particularly important as this seems to have caused the issue where smoke in the viewport was flickering when loading data from pointers after loading them from disk for the frame before (e.g. when resuming a bake job).
Add our own copy of the gtest discovery scripts from CMake a few reasons:
* Use the very latest version which supports PRE_TEST for Windows
* Fix usage of [] symbols in file paths that fail with the zsh shell
* Disable asan leak checker when discovering tests
This means Windows also no longer requires the very latest CMake 3.18.
The root of the issue comes to the fact that sub-data pointers were
used to match strips before/after copy-on-write. The undo system might
re-use sub-data pointers after re-allocating them, making it so that,
for example, pointer used by sound strip is later re-used by video
strip.
This fix takes an advantage of recently introduced per-sequence UUID
and uses it to match sequences before/after copy-on-write.
Will trigger code paths which makes sure UUIDs are generated and
are unique.
Enabled with --debug-depsgraph-uuid (which is also implied by
--debug-depsgraph).
This is the first step for having sequences covered with session UUID
with the goal to remove code which uses original sequence pointer to
match sequences.
Currently this UUID is maintained on file load, allocation and leaf
duplication function.There are more cases to cover and ensure UUID
is re-generated or re-used when needed. It will be done as follow-up
development.
Allows to use pre-defined structure for session UUIDs in all data
structures which needs it: pose channels, sequencer strips, modifiers.
The goal of all this is to have a reliable way of matching original
and copy-on-written versions of data, so that it's possible to
preserve runtime caches.
button
This was reported for the FCurve modifier restrict ranges, but might fail
elsewhere, too. Reason is that the post_but has its range (hardmin/
hardmax etc) set before the updates to the active button take place, so
changes here dont end up on the post_but (even though the RNA range
function is properly called for a new defined button - new one is not the
same as the post_but though).
Now update the ranges on the post_but when that gets active.
Fixes T78763
Maniphest Tasks: T78763
Differential Revision: https://developer.blender.org/D8265
These were added in rB146473f08335e8cb774ccaf1baad82a1d308fbe1 however
there were a few errors with the labels:
1. Underscore in label
2. Abbreviation when not needed
This bumps the minimum requirement for cmake from 3.10 to 3.18 on windows
if `WITH_GTESTS` is enabled.
Reviewed By: sergey brecht sybren campbellbarton
Differential Revision: https://developer.blender.org/D8405
2020-07-30 13:18:05 -06:00
4089 changed files with 198445 additions and 135440 deletions
@@ -20,6 +20,7 @@ from gpu_extras.presets import draw_circle_2d
offscreen=gpu.types.GPUOffScreen(512,512)
withoffscreen.bind():
bgl.glClearColor(0.0,0.0,0.0,0.0)
bgl.glClear(bgl.GL_COLOR_BUFFER_BIT)
withgpu.matrix.push_pop():
# reset matrices -> use normalized device coordinates [-1, 1]
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
