- Use doxygen style comments
- Improve comment for XR region type
- Improve RNA descriptions for XR nav location/rotation/scale
- Split controller draw callback into separate model and aim functions
This update of the Resample Curve node allows a field to populate the
count or length input of the node depending on the current mode. The
field is evaluated on the spline domain.
Differential Revision: https://developer.blender.org/D12735
I've seen requests to remove this or complaints about this error message
quite frequently. In lots of production files it's just always going off.
It's not an actionable warning, and since "slow" is relative, it isn't
always even correct.
Differential Revision: https://developer.blender.org/D12694
This commit introduces the Rotate Euler function node which modifies
an input euler rotation. The node replaces the "Point Rotate" node.
Addresses T91375.
Differential Revision: https://developer.blender.org/D12531
This update of the Switch node allows for field compatible types
to be switched through the node. This includes the following:
Float, Int, Bool, String, Vector, and Color
The remaining types are processed with the orginal code:
Geometry, Object, Collection, Texture, and Material
Because the old types require a diffent "switch" socket than the
field types, versioning for old files is included to move links
of those types to a new switch socket. Once fields of other types
are supported, this node can be updated to support them as well.
Differential Revision: https://developer.blender.org/D12642
This commit extends the 'Cone' and 'Cylinder' mesh primitive nodes,
with two inputs to control the segments along the side and in the fill.
This makes the nodes more flexible and brings them more in line with
the improved cube node.
Differential Revision: https://developer.blender.org/D12463
This update of the Set Handle Type node allows for a bool field to be
used as the selection of the affected control point handles for
bezier splines. If no bezier splines are provided a info message is
shown.
Differential Revision: https://developer.blender.org/D12526
This update of the Set Spline Type node allows for a bool field to be
used as the selection of the affected splines.
Differential Revision: https://developer.blender.org/D12522
The Spline Length Input node provides a field containing the
length of the current evaluated spline to the Point and Spline
domains.
Differential Revision: https://developer.blender.org/D12706
Add read-only access to the active catalog ID via
`context.space_data.params.catalog_id` in the Asset Browser context.
The UUID is exposed as string to Python.
The curve subdivide node can now take an int field to specify the
number of subdivisions to make at each curve segment.
Reviewed by: Hans Goudey
Differential Revision: https://developer.blender.org/D12534
Enable sorting motion tracking tracks by start / end times.
Help identifying what cases reconstructed camera jumps, based
on information about whether any track starts/ends at the frame.
Based on revision eb0eb54d96.
{F10563305}
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D12621
Always create an `AssetCatalogTree` in the `AssetCatalogService`. This
ensures that newly-created catalogs are immediately visible in the UI
(because they insert themselves into an already-existing tree).
Given an "active catalog" (i.e. the one selected in the UI), construct
an `AssetCatalogFilter` instance. This filter can determine whether an
asset should be shown or not. It returns `true` when The asset's catalog
ID is:
- the active catalog,
- an alias of the active catalog (so different UUID that maps to the
same path),
- a sub-catalog of the active catalog.
Not yet hooked up to the UI.
The use case for this method is quite obscure and difficult to
understand without an example. Despite how big looks, this is
actually the simplest example that makes sense.
This fixes T91828.
The current value of `GL_PACK_ALIGNMENT` may result in crash in the `gpu` module if the buffer is not aligned.
Differential Revision: https://developer.blender.org/D12720
Copy/Paste uses its own code path for ID linking, which was not setting
`LIB_TAG_DOIT` for proper instantiation later on.
Would be nice the make this logic closer to the rest of the link/append
code at some point, but for now this fix will do.
No idea why this was done that way (it originate from initial paste
commit, rB12b642062c6f).
But the IDs 'selected' as direct paste in `BLO_library_link_copypaste`
should be 'directly' linked, it's similar case to actual append of
selected IDs by the user.
Related to T87189.
This refactors and fixes the code that propagates socket types
through reroute nodes. In my tests it is faster than the previous
code. The difference becomes larger the more reroute nodes
there are, because the old code had O(n^2) runtime, while the
new code runs in linear time.
Differential Revision: https://developer.blender.org/D12716
Add asset catalogs test, to ensure missing catalogs are only created once,
and not for every originally defined catalog.
No functional changes to Blender (the code was already doing the right
thing).
The node was setting a warning when used with instances on input,
even though it worked fine.
Differential Revision: https://developer.blender.org/D12718
Alpha input was not receiving the final composite canvas
as preferred causing a Translate operation being inserted
for centering. This resulted in a transparent background.
The issue only affects Full Frame mode.
This patch is created to change the tooltip for Slip Strip Contents
As per the present info, only active strip will be affected.
But in reality selected strips can be trimmed with this operator.
Word Trim changed to Slip in tooltip
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12450
Add Offset/Slope/Power controls to the color balance modifier. This is
already available in compositor.
Reviewed By: sergey, ISS
Differential Revision: https://developer.blender.org/D12575
* Add OutputDriver, replacing function callbacks in Session.
* Add PathTraceTile, replacing tile access methods in Session.
* Add more detailed comments about how this driver should be implemented.
* Add OIIOOutputDriver for Cycles standalone to output an image.
Differential Revision: https://developer.blender.org/D12627
* Split GPUDisplay into two classes. PathTraceDisplay to implement the Cycles side,
and DisplayDriver to implement the host application side. The DisplayDriver is now
a fully abstract base class, embedded in the PathTraceDisplay.
* Move copy_pixels_to_texture implementation out of the host side into the Cycles side,
since it can be implemented in terms of the texture buffer mapping.
* Move definition of DeviceGraphicsInteropDestination into display driver header, so
that we do not need to expose private device headers in the public API.
* Add more detailed comments about how the DisplayDriver should be implemented.
The "driver" terminology might not be obvious, but is also used in other renderers.
Differential Revision: https://developer.blender.org/D12626
`BKE_mesh_boundbox_get` cannot be called for objects of type Curve.
The BoundBox however does not match the object seen in the scene.
This will be dealt with in another commit.
For every known catalog, ensure its parent catalog also exists. This
ensures that assets can be assigned to parent catalogs, even when they
didn't exist in the Catalog Definition File yet.
Would happen when there were multiple drag items in parallel. There was
a listbase constructed with twice the same item, even though that item
would be deleted after it was handled the first time.
Adds an easy way to add drop support for tree-view rows.
Most of the work is handled by the tree-view UI code. The tree items can
simply override a few functions (`can_drop()`, `on_drop()`,
`drop_tooltip()`) to implement their custom drop behavior.
While dragging over a tree-view item that can be dropped into/onto, the
item can show a custom and dynamic tooltip explaining what's gonna
happen on drop.
This isn't used yet, but will soon be for asset catalogs.
See documentation here:
https://wiki.blender.org/wiki/Source/Interface/Views#Further_Customizations
The `CatalogPath` name was an alias for `std::string`, so that it could
be easily switched over to something else. This happened in the previous
commit (switched to `AssetCatalogPath`), so the alias is no longer
necessary.
This commit removes the `CatalogPath` alias.
No functional changes.
So far we have used `std::string` for asset catalog paths. Some
operations are better described on a dedicated class for this, though.
This commits switches catalog paths from using `std::string` to a
dedicated `blender::bke::AssetCatalogPath` class.
The `using CatalogPath = AssetCatalogPath` alias is still there, and
will be removed in a following cleanup commit.
New `AssetCatalogPath` code reviewed by @severin in D12710.
Patch created by Pablo Vazquez
This change darkens the header area a bit to create more contrast with the texts.
Differential Revision: https://developer.blender.org/D12711
Handling of RigidBody data in duplicate of scenes/collections was very
wrong. This commit:
- Add handling of duplication of RB collections when fully duplicating
a scene.
- Fix Object duplication trying to add duplicated RB objects to
matching RBW collections.
While the later behavior is desired when only duplicated objects, when
duplicating their collections and/or scenes it is actually very bad, as
it would add back new object duplicates to old (RBW) collections.
If the "Current File" asset library is selected in the Asset Browser,
now asssets are filtered based on the active asset catalog. Previously
it would just show all assets. This was marked as a TODO in the code
already.
Maniphest Task: https://developer.blender.org/T91820
Passing multiple UDIM arguments into the packing function
is awkward especially since the caller may not be using UDIM.
Use an argument to store UDIM packing parameters which can be NULL,
which operates without any UDIM support.
Add a function that extracts these parameters out of the image space
allowing for multiple functions to take UDIM parameters in the future.
This is caused by line art loading curve objects twice from curve and converted mesh instances (when instance option is on). Now only load mesh when instance option is on.
This patch increases the size of the Area BORDERPADDING a bit to make
it easier to hit the edges when initiating area resizing.
See D11925 for details and examples.
Differential Revision: https://developer.blender.org/D11925
Reviewed by Campbell Barton
This commit exposes left and right bezier handles as an attribute.
Interaction basically works like edit mode. If you move an aligned
handle, it also moves the opposite handle of the control point.
The difference is that you can't edit "Auto" or "Vector" handles,
you have to first use the "Set Handle Type" node. That gives the handle
types a bit more meaning in the node tree-- changing them in edit mod
is more like a "UI override".
The attributes are named `handle_start` and `handle_end`,
which is the same name used in the curve RNA API.
A new virtual array implementation is added which handles the case of
splines that don't have these attributes, and it also calls two new
functions on `BezierSpline` to set the handle position accounting
for aligned handles.
The virtual arrays and attribute providers will be refactored
(probably templated) in the future, as a next step after the last
built-in curve attribute provider has landed.
Differential Revision: https://developer.blender.org/D12005
Without proper RNA paths, Alt-click editing properties on multiple
selected objects doesn not work (as well as the 'Copy To Selected'
operator).
Fixes T91806.
Maniphest Tasks: T91806
Differential Revision: https://developer.blender.org/D12700
This diff disables tests for Boolean, subdivision surface and volume
when GMP, Opensubdiv and Openvdb are not compiled respectively.
It also changes the existing file structure and adds sub-folders for
boolean and subdivison tests. The volume folder only has one test and
is as unchanged structure-wise.
Reviewed By: JacquesLucke, LazyDodo
Differential Revision: https://developer.blender.org/D12448
Similar to the previous change in the area: need to avoid ray
point and direction becoming a non-finite value.
Use the view direction when the geometrical normal can not be
calculated.
Collaboration and sanity inspiration with Brecht!
Differential Revision: https://developer.blender.org/D12703
This makes asset view templates, e.g. as used by the Pose Library add-on
use recursive asset loading, see
Also works around an issue that made assets not show up at all anymore
since fc7beac8d6. I'm creating a separate report for that regression,
but in the Asset Browser and Viewer it shouldn't be apparent currently.
Was using `NAME_MAX` which is defined in `limits.h`, which again may be
implicitly included by the compiler. Intend was to use the Blender
define `MAX_NAME`.
The Asset Browser now displays a tree with asset catalogs in the left
sidebar.
This replaces the asset categories. It uses the new UI tree-view API
(https://wiki.blender.org/wiki/Source/Interface/Views#Tree-View).
Buttons are displayed for adding and removing of catalogs. Parent items
can be collapsed, but the collapsed/uncollapsed state is not stored in
files yet.
Note that edits to catalogs (e.g. new or removed catalogs) are only
written to the asset library's catalog definition files when saving a
.blend.
In the "Current File" asset library, we try to show asset catalogs from
a parent asset library, or if that fails, from the directory the file is
stored in. See adaf4f56e1.
There are plenty of TODOs and smaller glitches to be fixed still. Plus a
UI polishing pass should be done.
Important missing UI features:
* Dragging assets into catalogs (WIP, close to being ready).
* Renaming catalogs
* Proper handling of catalogs in the "Current File" asset library
(currently not working well).
The "Current File" asset library is especially limited still. Since this
is the only place where you can assign assets to a catalog, this makes
the catalogs very cumbersome in general. To assign an asset to a
catalog, one has to manually copy the Catalog ID (a random hash like
number) to the asset metadata through a temporary UI in the Asset
Browser Sidebar. These limitations should be addressed over the next few
days, they are high priority.
Differential Revision: https://developer.blender.org/D12670
Link/append code needs proper access to scene/view3d data to handle
collections/objects instantiation.
Note that this is a temporary hack more than a proper fix, which would require
a deeper redesign of drag&drop code.
Also note that this will not handle 'properly' (i.e. as user would
expect it) cases like implicitely appended parent objects, in that only
the explicitely appended object will be dropped to the nes location, the
others will remain at their original coordinates.
Differential Revision: https://developer.blender.org/D12696
The issue was caused by hair shader setup setting normal to a non
finite value, which then gets used to create a ray with non-finite
direction, making BVH traversal to run out of stack memory.
Happens with 150_0040_A.lighting.blend frame 112 of the Sprites
project.
Differential Revision: https://developer.blender.org/D12692
Introduce a new keymap preference to navigate into folders by clicking on them once instead of twice.
Makes browsing folders faster albeit non-standard, so keeping this off by default for now.
Does not affect Industry Compatible or other keymaps.
It is still the possible to right-click to open context menu, hold Ctrl or Shift to select multiple items:
{F10651030, size=full}
----
Keymap preference:
{F10652759, size=full}
Part of T91537
Reviewed By: fsiddi, campbellbarton
Differential Revision: https://developer.blender.org/D12667
Caused by {rB3e5431fdf439}
Issue is that sculpting could start with using `SCULPT_smooth` and
(because of the Pressure sensitivity dropping to zero) code would switch
to `SCULPT_enhance_details_brush` at strength zero.
Issue with this though is that this can be in the middle or end of a
stroke and the necessary `ss->cache->detail_directions` are only
initialized for the first brush step (see
`SCULPT_stroke_is_first_brush_step` in `SCULPT_enhance_details_brush`).
With these missing, it could only go downhill from there.
Suggest to prevent the "mode-flip" from `SCULPT_smooth` to
`SCULPT_enhance_details_brush` (happening solely because of pressure
strength) by changing the condition.
Now do `SCULPT_enhance_details_brush` only if strength is **below** zero
and `SCULPT_smooth` else (flipping from enhance_details to regular smooth
is fine).
If inverting the brush in the middle of the stroke will be supported at
some point, the codepath of `smooth` would have to inform the cache that
invert changed and detail_directions would have to be initialized then
(even if not at the start of the stroke).
Maniphest Tasks: T89164
Differential Revision: https://developer.blender.org/D12676
Texts in Outliner dont activate on selecting (Text Editor did not change
to selected text) which is a bit inconsistent to other ID types.
ref T90862
Maniphest Tasks: T90862
Differential Revision: https://developer.blender.org/D12412
With 794c2828af & f48a4aa0f9 it's possible to reuse possibly
expensive, nested data of a data-block when appending. E.g. the
texture of a material, or the mesh of an object. Without this it's easy
to bloat memory and the file size. Duplicated textures also cause
unnecessary shader recompilations.
The feature was intended to be the new default behavior for the Asset
Browser, but it wasn't actually added to the UI yet. This patch adds a
new import type option to the Asset Browser. So from the menu in the
header, you can now choose between:
* Link
* Append
* Append (Reuse Data)
The latter is the new default.
Maniphest Task: https://developer.blender.org/T91741
Differential Revision: https://developer.blender.org/D12647
Reviewed by: Sybren Stüvel, Bastien Montagne
This patch adds color tags to VSE strips, an overlay option to toggle the colors
on and off, a section in the theme settings to define the 9 possible colors and
two ways of changing the color tag through the UI. You can change the color
through the right-click context menu, or in the strip side panel next to the
strip name.
Color tags are defined in user preferences and they can be disabled in overlay
settings.
Reviewed By: campbellbarton, ISS
Differential Revision: https://developer.blender.org/D12405
Avoids possible numerical issues in the path tracing kernel, which
is most important for displacement as non-finite values in BVH can
lead to infinite node recursion during traversal.
Differential Revision: https://developer.blender.org/D12690
Noticed while looking into flickering issues in viewport.
Doesn't seem to solve the flicker issue for me, but is something
what is supposed to be happening anyway.
Differential Revision: https://developer.blender.org/D12673
When the Asset Browser shows the "Current File" asset library, now it
also attempts to load an asset catalog definition file from location of
the current .blend file. This happens as follows:
* First, see if the file is inside of an asset library that is "mounted" in the
Preferences. Load the catalogs from there if so.
* Otherwise, if the file is saved, load the catalogs from the directory the
file is saved in.
* If the file is not saved, no catalogs will be loaded.
Unit tests are being worked on in D12689.
Creating catalogs from the "Current File" asset library still doesn't work, as
the asset catalog service doesn't construct an in-memory catalog definition
file in that case yet.
Differential Revision: https://developer.blender.org/D12675
The issues:
1.) When we want to remove keyframes from a range of frames in an
action,
then we can use bpy.ops.anim.keyframe_delete_v3d to remove the keys
frame by frame. However, whenever the operator hits a frame with no
keyframes, then it generates an error. While when it hits a frame
with keyframes, then it reports the numbner of removed keys.
This creates a lot of unnecessary noise in the Blender console.
2.) Furthermore a related issue is that WM_event_add_notifier() is
called also when no frames where removed. This seems to significantly
slow down the removal of keyframes in a range of frames at least
when i use vscode for debugging.
A proposal for improvement:
This patch adds an attribute 'confirm_success' which controls
if the operator reports back what it did (or did not) while
executing. Silent mode would then be called like this:
bpy.ops.anim.keyframe_delete_v3d(confirm_success=False)
Note: confirm_success is True by default so this patchj does not
change the behavior of Blender, it only gives the option to scripts.
3.) Personal note:
I have chosen the attribute name to be equal as it is used
in other related operators. However i rather would rename the
attribute to "verbose" (preferred) or "with_confirm". But i let this
to be decided by the reviewers. Thanks for your time to review!
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12629
Swap the tool-header and header order so the tool-header
so the header is always next to the window edge.
Note that files saved in 3.0 will have overlapping headers when opened
in any version of Blender before this commit.
Reviewed By: Severin, fsiddi
Maniphest Tasks: T91536
Ref D12631
The issue was that the `GeometrySet` that comes from the modifier does
not have full ownership of the mesh for legacy reasons to avoid copies.
Calling `ensure_owns_direct_data` makes sure that the geometry set
actually owns the geometry so that it can be instanced.
For consistency with other nodes, we also want to process
all instances in the Points input independently. This allows
for more efficient instancing of many objects but also leads
to nested instancing. All instances are processed in their
local space, so that instances don't have to be realized.
Differential Revision: https://developer.blender.org/D12660
Some cases were not covered by the original doversion in
4a0ddeb62b. For now we make it always change the wire color regardless
of whether it was changed before or not.
This do a subversion bump.
Implements T78397
Extends the functionality of pack islands operator to allow packing UVs
to either the closest or active UDIM tile.
This provides 2 new options for packing UVs :
* Closest UDIM: Selected UVs will be packed to the UDIM tile they were
placed on. If not present on a valid UDIM tile, the UVs will be packed
to the closest UDIM in UV space
* Active UDIM: Selected UVs will be packed to the active UDIM image tile
In case, no image is present in the UV editor, then UVs will be packed
to the tile on the UDIM grid where the 2D cursor is located.
Reviewed By: campbellbarton
Maniphest Tasks: T78397
Ref D12680
Implements T89789, T89792, custom grid (described as dynamic grid in
T78389) and UV grid snapping (T78391)
Replaces the default UV editor grid with 2 new types of grid :
* Custom grid: Allows the user to create an NxN grid, where the value
of N is specified by the user.
* Subdividing grid: Subdivides the UV editor grid when the user
zooms in the viewport and vice versa when zooming out.
UV snapping improvements :
* Increment snapping: Increment values for snapping are calculated based
on which grid type is being used in the UV editor
(subdividing or custom). In general the increment value is equal to
the distance between 2 visible grid lines.
* Absolute grid snap: New toggle added to increment snapping option in
the UV editor, allows UV grid snapping during translation.
Reviewed By: campbellbarton
Ref D12684
This was reported for the Outliner.
It was possible to set 'show_locked_time' on any space (via python, not
sure if there are other ways to achieve this).
Navigating in an animation editor obviously ruined the layout in certain
Editors that are not made for this.
Now restrict syncing to editors that support it well (the ones that have
this setting exposed in their menus) and prevent setting this in RNA.
Maniphest Tasks: T91237
Differential Revision: https://developer.blender.org/D12512
- Instead of making the enum expanded leave it in menu form.
- Use full words instead of letters.
Differential Revision: https://developer.blender.org/D12686
Add a fields-aware implementation of the attribute proximity node.
The Source position is an implicit position field, but can be
connected with a position input node with alterations before use.
The target input and mode function the same as the original node.
Patch by Johnny Matthews with edits from Hans Goudey (@HooglyBoogly).
Differential Revision: https://developer.blender.org/D12635
This commit adds functionality for operations that require pixel
translation or resizing on "Full Frame" mode, allowing to adjust
their canvas. It fixes most cropping issues in translate, scale,
rotate and transform nodes by adjusting their canvas to the result,
instead of the input canvas.
Operations output buffer is still always on (0,0) position for
easier image algorithm implementation, even when the
canvas is not.
Current limitations (will be addressed on bcon2):
- Displayed translation in Viewer node is limited to 6000px.
- When scaling up the canvas size is limited to the
scene resolution size x 1.5 . From that point it crops.
If none of these limitations are hit, the Viewer node displays
the full input with any translation.
Differential Revision: https://developer.blender.org/D12466
This is a code refactor in preparation of supporting canvas
compositing. See {D12466}.
No functional changes, all canvases are at (0,0) position matching
tiled implementation.
Differential Revision: https://developer.blender.org/D12465
Sometimes the `use_partial_connect` option could trigger the assert:
```
BLI_assert(!BM_elem_flag_test(l_iter->v, VERT_NOT_IN_STACK));
```
This can happen when `v_delimit->e` is not part of edgenet, so `v_other` will not have the flag.
- Many cleanups of to use list base
- Some variable changes
These change is needed to migrate to the new socket builder API
Reviewed By: manzanilla
Differential Revision: https://developer.blender.org/D12366
The updated version has a selection input as a field
and does not realize instances implicitly.
Differential Revision: https://developer.blender.org/D12506
This enables fields as the official workflow for geometry nodes.
While many features are converted to use fields rather than the old
attribute workflow, many are not yet converted. In that case, the
unconverted nodes are still accessible with an experimental option.
In the coming weeks the rest of the nodes will be converted.
Differential Revision: https://developer.blender.org/D12672
Though the factor isn't so useful to adjust by itself, and is mostly
useful when used with a field connected, the slider from 0 to 1 can
help to make it clear that it's just used as a multiplier for the max
density after distribution.
Differential Revision: https://developer.blender.org/D12654
Because of a bug in VS2017 codecvt is replaced with Blender
BLI functions to convert from UTF8 to UTF32.
Differential Revision: https://developer.blender.org/D12655
NOTE: this feature is not ready for user testing, and not yet enabled in daily
builds. It is being merged now for easier collaboration on development.
HIP is a heterogenous compute interface allowing C++ code to be executed on
GPUs similar to CUDA. It is intended to bring back AMD GPU rendering support
on Windows and Linux.
https://github.com/ROCm-Developer-Tools/HIP.
As of the time of writing, it should compile and run on Linux with existing
HIP compilers and driver runtimes. Publicly available compilers and drivers
for Windows will come later.
See task T91571 for more details on the current status and work remaining
to be done.
Credits:
Sayak Biswas (AMD)
Arya Rafii (AMD)
Brian Savery (AMD)
Differential Revision: https://developer.blender.org/D12578
This commit adds nodes to do direct conversion between meshes and point
clouds in geometry nodes. The conversion from mesh to points is helpful
to instance once per face, or once per edge, which was previously only
possibly with ugly work-arounds. Fields can be evaluated on the mesh
to pass them to the points with the attribute capture node.
The other conversion, point cloud to mesh vertices, is a bit less
obvious, though it is still a common request from users. It's helpful
for flexibility when passing data around, better visualization in the
viewport (and in the future, cycles), and the simplicity of points.
This is a step towards T91754, where point clouds are currently
combined with meshes when outputing to the next modifier after geometry
nodes. Since we're removing the implicit behavior for realizing
instances, it feels natural to use an explicit node to convert points
to vertices too.
Differential Revision: https://developer.blender.org/D12657
Change the toggle to switch between an attribute and a single value to
only display for inputs that are fields, as determined statically by
the field inferencing added in rB61f3d4eb7c7db7. This means the field
inferencing must be calculated on file load, since it's used in the UI.
Differential Revision: https://developer.blender.org/D12623
As described in T91672, often it can be much more efficient to run each
node only on the unique geometry of the instances, rather than realizing
all instances and potentially processing redundant data. Sometimes the
performance difference can be completely smooth vs. completely unusable.
Geometry nodes used to hide that choice from users by always realizing
instances, but recently we have decided to expose it. So this commit
makes nodes run once per unique reference in the entire tree of nested
instances in their input geometries, continuing the work started in
rB0559971ab377 and rBf94164d89629f0d2. For the old behavior, a realize
instances node can be added before the nodes, which is done in the
versioning code.
Differential Revision: https://developer.blender.org/D12656
This should not be allowed in general, added some initial call to check
when user is allowed to delete a data to search for mandatory override
usages...
- Curve to Points: Needs output sockets
- Curve Endpoitns: Needs the same output sockets
- Edge Split: Should have a selection input instead
- Subdivision Surface: Should not use "crease" implicitly
All new versions of these nodes should also not implicitly
realize instances.
Since we bumped the number of channels to 128, I forgot to doversion the
editors. So new files (new editors) would have this right, but not
existing files.
Fixup to: 8fecc2a852
Own mistake when making NLA overridable, instead of assuming things
about the ID owner of the animation data being processed, properly
return and use the one found by `ED_actedit_animdata_from_context`.
Particle copying code was already properly sharing pointcache between
orig data and its copy only when `LIB_ID_COPY_SET_COPIED_ON_WRITE` is
set, do the same for the other point cache users.
Using `LIB_ID_CREATE_NO_MAIN` here is waaaaaaay to much wide scope for
such a dangerous/advanced behavior, that kind of things has to be
strictly restricted in scope.
Remove `AssetCatalogService::write_to_disk()` function. It has been
superseded by `write_to_disk_on_blendfile_save()`; the handful of test
functions that called the old function have been adjusted to use the
new one.
No functional changes to Blender itself.
This change fixes an issue when scene has a shadow catcher and film is
configured to be transparent. Starting viewport render and making the
background non-transparent will cause bad memory access (wrong render
and possibly crash).
Film passes depends on transparency of background, so check for this.
Demo file: F10650585
Differential Revision: https://developer.blender.org/D12666
Only do denoising on the full-frame result. Saves render time.
Can re-consider in the future when/if we'll want to support
denoising during rendering (similar to viewport) to allow artists
to stop rendering when they see image to be good enough. Until
there is a design for that workflow stick to a more time efficient
rendering.
Differential Revision: https://developer.blender.org/D12662
Use dashes to represent the function flow (while keeping continuous
lines for the data-flow).
It is important to tell both flows apart (the data and the function
flow). The sockets help with that, the noodles help this further.
The "data flow" is evaluated at every single node. A user can inspect
the output sockets of those nodes and have a glimpse at their values.
The "function flow" (nodes) however is only evaluated in the geometry
nodes. The noodles are not transporting data in the same sense of the
"data flow". All that can be inspected are the attributes the functions
depend on.
Having this clearly communicated should help users to inspect the
nodetrees, read and understand the different flows in the same tree.
---
Known limitations:
At the moment the dash lines are not equidistant:
* It would be nice to get the "uv.x" to be resampled for the bezier curve
so the dashes are equally distributed in the curve.
* Using distance between the P3 and P0 instead of the real bezier curve
length seems to be fine.
---
Full disclaimer:
Changes with that much of a visual impact tend to be controversial. So
far the main feedback is that dashed lines can be associated to broken
link, and that there are better ways to represent the flows (or
different information that should be visually represented).
I'm fully aware of that. However dashed lines are already used in the
viewport and outliner to indicate (hierarchical) relation. Besides,
other approaches (double-lines, having the data flow to be more
distinct, ...) didn't pan out in the end (or didn't look as good as
this).
---
Impact in other editors:
The compositor uses mostly a "data flow" nodetree, so no change is
expected there.
The shader nodetree is one that could but doesn't have to change its
visual language.
The shader nodetree uses mostly "function flow" with some "data flow" nodes.
One can argue that it should be adapted to follow the
same pattern as geometry nodes (with the new noodles and the diamond
sockets). Oh the other hand, a shader nodetree has a single context.
When a node depends on the "UV", there is only one UV at a time for the
entire nodetree. So it can also be treated as a psedo "data flow"
nodetree if we want to avoid too many changes in other parts of Blender.
Differential Revision: https://developer.blender.org/D12602
Add `AssetCatalogService::update_catalog_path()` to change the catalog
path of the given catalog, and also change the path of all the catalogs
contained within the given catalog.
Rebuilds the tree structure for the UI, but does not save the new catalog
definitions to disk.
No user-facing changes, just backend preparation for UI work.
NLA and Dope Sheet use a specific transform operation to scale.
Unlike the conventional resize operation, `TIME_SCALE` operates on `td->val`.
This is a bit outside the convention of transform operators.
The expected thing in this case would be to work in `td->loc` and use the conventional resize operator.
But for now, to fix the problem, use `td->loc` in the `TIME_SCALE` operation.
This commit also brings a cleanup in the style of some comments and removing unnecessary `memset`.
The Clear Asset operator (`ASSET_OT_clear`) now clears the Fake User.
This makes it symmetrical with the Mark Asset (`ASSET_OT_mark`)
operator, which sets Fake User to ensure assets are always saved to
disk.
Clear Asset now also has a `set_fake_user` boolean option, which allows
users to Clear Asset and set Fake User in one go.
The asset browser now shows these options in the context menu:
- Clear Asset: also clears Fake User. This makes it possible to actually
remove assets from the blend file without leaving the Asset Browser.
- Clear Asset (Set Fake User): keeps the Fake User bit set. This makes
it possible to "hide" the asset from the asset browser, without
loosing the actual data.
Internally, the `ED_asset_clear_id(id)` function now always clears the
Fake User bit. If it was intended that this bit was kept set, it's up to
the caller to explicitly call `id_fake_user_set(id)` afterwards.
Manifest Task: T90844
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D12663
Currently the Drivers Editor shows this (the blue thing can be dragged
to change frame):
{F10647661}
But the Drivers Editors X axis is the output of the driver [which can be
further tweaked by the curve] not time(frame).
So it seems better to not mix them here, it is just confusing to have
two different units on one axis.
Especially since what we really want to look at in X (the drivers output
value) can be in a totally unrelated range compared to frames, so e.g.
we might be interested in a drivers range from 0.0 to 1.0 and a
framerange of 100 to 200, so putting this on one axis just does not make
sense. Better to use a separate timeline for this.
Note 2.79 also did not do this.
Maniphest Tasks: T91157
Differential Revision: https://developer.blender.org/D12392
When "Show Cursor" is unchecked, the Drivers Editor would still display
the vertical line representing the cursor x.
Probably overseen in {rB65072499c65a} (historically the vertical line
could represent either the current frame of the cursor X in drawing, but
this is now much more separate).
There is no point in seeing part of the cursor in the Drivers Editor if
this is disabled.
Also correct outdated comments.
ref. T91157
Maniphest Tasks: T91157
Differential Revision: https://developer.blender.org/D12391
Make `BLI_path_contains()` case-insensitive on Windows. This behaviour
is dependent on the platform Blender is running on, like the rest of
BLI_path, and not on the style of paths (Windows-style paths will be
treated case-sensitively when Blender is running on Linux/macOS).
The related issue which is fixed by this change is the missing noisy
image pass when denoising and border render is used,
Need to allocate passes after the passes has been copied from the
original render result.
Labels in headers reserved space for an icon even when no icon was used.
This is caused by the shared function ui_text_icon_width adding 1.5x
a buttons X-units width the the width of the string.
Menu buttons detected this and subtracted the extra padding.
Instead of adding the same workaround for labels,
add ui_text_icon_width_ex that takes a padding argument.
Add presets for 'default', 'compact' and 'none' to avoid duplicating
padding values.
This allows removal of hard-coded label scaling for the add-object tool.
While World data has always been able to be marked as an asset, there
was no way to actually use them from the asset browser. This change
allows users to drag-drop world assets onto the Viewport and have them
appended/linked to their scene.
Differential Revision: https://developer.blender.org/D12566
Only run the node once for every unique geometry set in the input's
instance heirarchy. This can massively improve performance when
there are many instances, but it will mean that the result is the same
for every instance. For the previous behavior, a "Realize Instances"
node can be used before this one.
This node can be changed without versioning since the old material
assign node was already deprecated and replaced.
In a sub-panel it will be clearer that they are outputs, since they
just look like more inputs now. Unfortunately it is not possible to
make sub-panels display conditionally currently, so the output
sub-panel will always be visible whether or not it is empty.
Differential Revision: https://developer.blender.org/D12653
Part of the fix is by Jacques. This fixes the most obvious case, but it's
still not clear how to deal with non-mesh geometry instances or how to handle
motion blur for such instances.
As also explained in D6134, in most case of Stretch To usage in
rigs, it is desirable to use swing rotation, either via the old
method of pairing the constraint with Damped Track, or via the
Swing rotation type introduced in 2.82. This is for instance true
for all usages of the constraint in Rigify.
The reason can be understood by realizing that unlike order-
dependent euler rotations, swing is not biased to an axis, and
isn't affected by gimbal lock effects at merely 90 degrees
of rotation (it has only one singularity at 180 degrees).
Thus it makes sense to change the default for newly created
constraints to the Swing mode. This has no backward compatibility
concerns except for old tutorials and rig generation scripts.
Differential Revision: https://developer.blender.org/D12643
Basically this enables the select-tweaking behavior as per the
guidelines:
https://wiki.blender.org/wiki/Human_Interface_Guidelines/Selection#Select-tweaking.
We use this in most other other editors that allow selecting and
dragging multiple items. But besides the consistency improvement, this
is important if we want to support dragging multiple assets (or files)
in future. We want to support this at least for dragging multiple assets
into an asset catalog for the upcoming asset catalog UI.
With this commit, the distribute points on faces node runs only
once for every unique mesh in its input. That means if there are
100 instances of the same mesh, it will only run once.
This basically reverts rB84a4f2ae68d408301. The optimization there
didn't end up being worth it in the end, since it complicates code
quite a lot. It's also incompatible with this method of dealing with
instances, and it breaks field evaluation for instances, where we would
have to make sure to handle each instance transform properly otherwise,
evaluating the field separately for every instance.
Differential Revision: https://developer.blender.org/D12630
The Asset Catalog Definition File is now saved whenever the blend file
is saved. The location of the CDF depends on where the blend file is
saved, and whether previously a CDF was already loaded, according to the
following rules. The first matching rule wins:
1. Already loaded a CDF from disk? -> Always write to that file.
2. The directory containing the blend file has a
`blender_assets.cats.txt` file? -> Merge with & write to that file.
3. The directory containing the blend file is part of an asset library,
as per the user's preferences? -> Merge with & write to
`${ASSET_LIBRARY_ROOT}/blender_assets.cats.txt`
4. Create a new file `blender_assets.cats.txt` next to the blend file.
Add `BKE_preferences_asset_library_containing_path(&U, some_path)` that
finds the asset library that contains the given path.
This is a simple linear search, returning the first asset library that
matches. There is no smartness when it comes to nested asset libraries
(like returning the library with the best-matching path), although this
could be a useful feature to add later.
Add function `BLI_path_contains(container, containee)` that returns true
if and only `container` contains `containee`.
Paths are normalised and converted to native path separators before
comparing. Relative paths are *not* made absolute, to simplify the
function call; if this is necessary the caller has to do this conversion
first.
`BKE_object_material_slot_used` would only check obdata usages, but
particle settings can also (weirdly enough) use objects' material slots.
So now, as its name suggests, `BKE_object_material_slot_used` does take
an object as parameter, and also checks for potential slot usage from
psys in the object.
* Fixes missing update of the catalog tree when adding catalogs.
* Adds iterators for the catalogs, needed for UI code.
* Store catalog ID in the catalog tree items, needed for UI code.
* Other smaller API additions for the UI.
* Improve comments and smaller cleanups.
New functions are covered with unit tests.
Differential Revision: https://developer.blender.org/D12618
Reviewed by: Sybren Stüvel
This adds a new `GeometrySet::modify_geometry_sets` method that can be
used to update each sub-geometry-set separately without making any
instances real.
Differential Revision: https://developer.blender.org/D12650
Before the visibility test against the visibility flags was performed in an any-hit program in OptiX
(called `__anyhit__kernel_optix_visibility_test`), which was using the `__prim_visibility` array.
This is not entirely correct however, since `__prim_visibility` is filled with the merged visibility
flags of all objects that reference that primitive, so if one object uses different visibility flags
than another object, but they both are instances of the same geometry, they would appear the same
way. The reason that the any-hit program was used rather than the OptiX instance visibility mask is
that the latter is currently limited to 8 bits only, which is not sufficient to contain all Cycles
visibility flags (12 bits).
To mostly fix the problem with multiple instances and different visibility flags, I changed things to
use the OptiX instance visibility mask for a subset of the Cycles visibility flags (`PATH_RAY_CAMERA`
to `PATH_RAY_VOLUME_SCATTER`, which fit into 8 bits) and only fall back to the visibility test any-hit
program if that isn't enough (e.g. the ray visibility mask exceeds 8 bits or when using the built-in
curves from OptiX, since the any-hit program is then also used to skip the curve endcaps).
This may also improve performance in some cases, since by default OptiX can now perform the normal
scene intersection trace calls entirely on RT cores without having to jump back to the SM on every
hit to execute the any-hit program.
Fixes T89801
Differential Revision: https://developer.blender.org/D12604
* ID pointer returned by `wm_file_link_append_datablock_ex` was
improperly extracted from `WMLinkAppendDataItem` before append step.
* Code deleting linked IDs when their local matching version was re-used
did not properly clear `LIB_TAG_DOIT` beforehand.
If the theme used by the user did not touch the wire or the wire outline
colors this will update them as well.
This was supposed to be a part of a bigger UI theme change for 3.0. But
it was expedited because of the recent change in line thickness for the
noodles (2bd0205215).
Theme change by Pablo Vazquez.
Differential Revision: https://developer.blender.org/D12649
This patch allows passing a field to the modifier as output. In the
modifier, the user can choose an attribute name. The attribute
will be filled with values computed by the field. This only works
for realized mesh/curve/point data. As mentioned in T91376, the
output domain is selected in the node group itself. We might want
to add this functionality to the modifier later as well, but not now.
Differential Revision: https://developer.blender.org/D12644
For some reason was assuming setting a property in RNA would call its
update callback if any, but this actually needs to be done separately.
So add this call to `rna_property_override_operation_apply`.
There are cases where there is no way to ensure we do have/know about an
active scene. Further more, this should not be required to perform
'real' updates on data, only to perform additional special handling in
current scene (mostly related to editing tools, UI, etc.).
This pointer is actually almost never used in practice, and half of its current
usages are fairly close to abuse of the system (like calls to
`ED_gpencil_tag_scene_gpencil` or `BKE_rigidbody_cache_reset`).
This commit ensures that the few places using this 'active scene' pointer are
safely handling the `NULL` case, and clearly document the fact that a
NULL scene pointer is valid.
Scene passed to the update callback is the active scene it //may// not
be that actual ID owner of the affected data (although in practice it
should always be currently).
This makes it easier to spot which links contain fields and which
contain data. Actually, the patch makes all other links a bit thicker.
However, with soon-to-be-implemented theme changes, the
perceived thickness will be the same as before.
This is part of T91563.
Differential Revision: https://developer.blender.org/D12646
The original limit dates back from 2002 when Blender went open source.
After that many years some productions (e.g., Sprite Fright) are already
experiencing limitations for complex edits.
The future plans is to support an initial shorter (2?) number of
channels with support to "unlimited" channels.
Finally, I'm bumping the minimum file requirement since files with more
than 32 channels won't work well in old Blender versions.
In a future commit I will implement a sanitization so that we only read (and write)
128 channels. Making sure future changes of this number won't corrupt Blender.
Differential Revision: https://developer.blender.org/D12645
The clamp added will ensure immediate speed direction change on
changing to/from positive/negative speed factor when using the Speed
effect strip's Multiply mode.
Reviewed By: ISS, sergey
Differential Revision: https://developer.blender.org/D12462
Whilst in pose-mode, the selection filter only includes other objects in
pose-mode instead of the object selection.
This makes sense as the selection of the pose bones what the user as
acting on in the 3D view.
The object selection only makes sense to use in object mode.
Reviewed By: sybren
Maniphest Tasks: T81922
Ref D12494
While the option allows tools be be activated on press instead of tweak,
this meant box-select was catching Ctrl-LMB which is also used for
add/extrude in edit mode.
Resolve this by always using tweak for selection tools,
only supporting activation on press for other tools.
Note that this doesn't impact the default configuration.
This adds the ability to cancel out of the roll using ESC or RMB
(which is not common for viewops -- but makes sense in the case of roll
I think). This resets the view as well as potential locked cameras to
the original orientations (but does not remove potential autokeys --
which no transform does on cancel btw.)
Maniphest Tasks: T89883
Differential Revision: https://developer.blender.org/D12582
Since its introduction in {rB5c569d227b64}, the view roll was based on
horizontal movement only. Using a "real" angle not only feels more
natural but also has the benefit of getting more precission the further
away from the center you are (just like regular rotation, brush/stencil
rotation etc.). A similar thing has already been implemented in the
Grease Pencil Tools Addon, now make the blender standard roll the same.
Since this is not using the transform system, we are still lacking a
line in the viewport (this could be added but since this is always based
on the center of the view we dont necessarily need this), as well as the
additional Shift-extra-precission behavior.
Fixes T89883
Maniphest Tasks: T89883
Differential Revision: https://developer.blender.org/D12582
Proxy conversion is a fairly particular case of liboverride creation, in
which remapping all local usages of linked data probably makes more
sense, rather than only doing so whitin the overridden 'group' of IDs.
Introduce `BKE_callback_remove()`, which undoes the effect of
`BKE_callback_add()`. It also respects `funcstore->alloc` by freeing the
removed `funcstore` when needed.
This allows for shorter-lived objects in memory to unregister their
callbacks at the end of their lifespan.
`BKE_callback_global_finalize()` has been adjusted so that the
responsibility "remove a callback" is given to one function only.
Reviewed by: campbellbarton
Differential Revision: https://developer.blender.org/D12625
This adds a new Instance on Points node that is a replacement
for the old Point Instance node. Contrary to the old node,
it does not have a mode to instance objects or collections
directly. Instead, the node has to be used with an Object/
Collection Info to achieve the same effect.
Rotation and scale of the instances can be adjusted in the node
directly or can be controlled with a field to get some variation
between instances.
The node supports placing different instances on different points.
The user has control over which instance is placed on which point
using an Instance Index input. If that functionality is used, the
Instance Geometry has to contain multiple instances that can are
instanced separately.
Differential Revision: https://developer.blender.org/D12478
This adds two new input sockets to the Collection Info node:
* `Separate Children`: When turned off, the entire collection is output as a single
collection instance (same behavior as before). When turned on, each child of
the collection is output as a separate instance (children can be objects and collections).
Toggling this input should not change the visual transforms of the output geometry.
* `Reset Children`: Only used when `Separate Children` is on. When used, the transforms
of the instances are reset to the origin. This is useful when one wants to e.g. instance
the collection children separately in the upcoming instancing node.
Part of D12478.
Fix T91632: Stops the sample correlation between dimensions which was causing rendering artefacts on simple scenes.
This is done by increasing the amount of jitter the Cranley Patterson Rotation is allowed to add. Also, it uses the y dimension of the of the sample table for 1D sampling which causes further decorrelation between dimensions. As an additional measure the x and y dimensions are swapped randomly to provide further decorrelation.
Maniphest Tasks: T91632
Differential Revision: https://developer.blender.org/D12610
Zoom to Fit is working in all display modes, but was only exposed in
Image mode. This patch exposes it in all Image modes.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D12632
Multi-functions are not allowed to throw exceptions that are not
caught in the same multi-function. Previously, it was difficult to
backtrack a crash to a previously thrown exception.
smooth out jaggy lines with a given threshold. For each point in a stroke, the ones with in a given distance of its previous segment will be removed,
thus "zig-zag" artefacts can be cleaned up.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12050
This will help detecting missing API changes. Those keywords were added
on classes which did not already use them. Also added missing
`accepts_object_type()` on NURBS reader.
Point clouds are not imported and read anymore. This was caused by an
API change in rB128eb6cbe928e58dfee1c64f340fd8d663134c26 which was not
applied to `AbcPointsReader`. It did not cause a compile error as the
base class as a default implementation for this method.
We were writing large 2048x2048 tiles into EXR files, which appears to cause
integer overflow inside the OpenEXR library when there are multiple passes. Now
use smaller tiles in the image file, while still rendering large tiles.
This adds the requirement that the render tile size must be a multiple of 128
or be smaller than 128, this is adjusted automatically.
This node replaces the deprecated Attribute Randomize node, populating
a vector, float, integer or boolean field with random values. Vector,
float, and integer have min/max settings, which are also field aware.
The boolean type has a probability value for controlling what portion
of the output should be true. All four types have a field seed input
which is implicitly driven by the index, otherwise, all values would
be the same "random" value.
The Random Float node is now deprecated like other nodes, since it is
redundant with this node.
Differential Revision: https://developer.blender.org/D12603
Until now, the asset catalogs would only show up after all assets from
the library were loaded. Now the catalogs are read first, which makes
them appear pretty much immediately. This makes the UI more responsive
and feel less heavy.
I added a dedicated file-list type for asset libraries now. While not
necessarily needed, I prefer that so asset library specific stuff can be
handled in there.
This commit adds a node that generates a text paragraph as curve
instances. The inputs on the node control the overall shape of the
paragraph, and other nodes can be used to move the individual instances
afterwards. To output more than one line, the "Special Characters" node
can be used.
The node outputs instances instead of real geometry so that it doesn't
have to duplicate work for every character afterwards. This is much
more efficient, because all of the curve evaluation and nodes like fill
curve don't have to repeat the same calculation for every instance of
the same character.
In the future, the instances component will support attributes, and the
node can output attribute fields like "Word Index" and "Line Index".
Differential Revision: https://developer.blender.org/D11522
This patch adds a new node called "Special Characters" with two string
outputs: "Line Break" and "Tab". This is necessary because the newline
character cannot be easily typed with a keyboard, but is necessary for
the string to curve node.
Differential Revision: https://developer.blender.org/D12620
This adds initial limited support for socket tooltips. It's limited
in a couple of ways for now:
* Only works when hovering over the socket shape, not when hovering
over the value in the socket.
* Only works for built-in nodes that already use the new node
declaration system. This can later be extended to support pynodes.
Those limitations are well worth it for now, given that the
implementation is quite simple and the impact on usability is quite
large. More complex updates to the layout system, that would allow
showing socket tooltips in the nodes, can be done later. With the
current implementation we can at least start writing tooltips for
geometry nodes now.
This commit already adds tooltips for the Cylinder node as an example.
Differential Revision: https://developer.blender.org/D12607
In meshes modifer the Lowest is 0 and Highest is 1.0 and this was working inverted for grease pencil. Now, it works equals to meshes modifier.
Also changed the tooltip to keep consistency with meshes modifier.
When writing asset catalog definition files, order the catalogs by
(path, UUID). This ensures that every write produces the same file, playing
nice with versioning / synchronisation systems.
Add `operator<` to C++ class to allow lexicographic ordering of UUIDs.
This will be necessary when writing asset catalogs to disk in a predictable
(i.e. ordered) manner.
The "path with trailing slash" test catalog was using the same path as
another catalog, which meant it was ignored after doing the path
cleanup. It's now different in the test file in SVN, so it'll actually
show up in the test.
This commit also add an experimental userPreferences to prevent proxies
conversions on file load, and reporting for amount of coverted proxies
(and possible issues).
Note that potentially linked proxies from other libraries are not
hamdled here (this feature seems to be broken anyway in master
currently?).
This adds a replacement for the deprecated Point Distribute node.
Arguments for the name change can be found in T91155.
Descriptions of the sockets are available in D12536.
Thanks to Jarrett Johnson for the initial patch!
Differential Revision: https://developer.blender.org/D12536
By default, we'll always get a falloff like this from the tool:
{F10559413}
But in the context of using vertexgroups in modifiers/modeling, a choice
on how the gradient falloff of the Weightpaint Gradient tool is shaped
would be desirable:
"real" linear:
{F10559416}
Custom:
{F10559421}
{F10559428}
The way the Weightpaint gradient tool works is a bit outside the usual
tools that use brushes [even though it creates a brush on the fly in
`WPGradient_userData`].
However, it does not have an entry in `eBrushWeightPaintTool` and adding
one there does not play nice for the same reasons (not "really" being
integrated in the brush-based tools).
So in order to expose the brush curve in the UI, we would have to do one
of the following:
- [1] try to use `VIEW3D_PT_tools_brush_falloff`, for this to work:
-- make all kinds of exception in python super classes [`FalloffPanel`,
`BrushPanel`, `UnifiedPaintPanel`, ... -- including making real entries
in `eBrushWeightPaintTool`] to get a proper tool mode and...
-- .. to also make sure Falloff Shape and Front-Face Falloff are not
available [which the tool seems to just not support in its current form]
- [2] just have a simple, contained panel for this tool alone
This patch implements [2] and adds it as part of the ToolDef (could also
be done in `VIEW3D_HT_tool_header`, but again, I think this is nice to
keep separate from the usual tools)
{F10559482}
{F10559485}
Testfile:
{F10559442}
Fixes T91636
Maniphest Tasks: T91636
Differential Revision: https://developer.blender.org/D12614
When Browsing libraries the asset files were opened multiple times.
once to determine the needed groups to query and once for each
group to query the items in the group. For file browsing this makes sense
but for asset browsing this can be reduced.
This patch will load the asset files recursively and only opens them once.
Another change is that only the assets are requested and not filtered out
later in the process.
This patch is needed to simplify the library indexing. Where
we need access to the full library content.
## The numbers ##
Benchmarked by adding scenes of the spring open movie to the default
asset library. Refreshing the asset library would recursively load all the files
there.
| **8bc27c508a** | Processed 317 'directories/libraries' | 7.573986s |
| **Patch** | Processed 42 'directories/libraries' | 0.821013s |
{F10442811}
Reviewed By: mont29, Severin
Maniphest Tasks: T91406
Differential Revision: https://developer.blender.org/D12499
Goal is to add the length attribute to the Hair Info node, for better control over color gradients or similar along the hair.
Reviewed By: #eevee_viewport, brecht
Differential Revision: https://developer.blender.org/D10481
This implements the update logic for the vizualization of which
sockets pass data or constants directly, and which pass functions.
The socket shapes may still have to be updated. That should be
done separately, because it might be a bit more involved, because
socket shapes are currently linked to keyframe shapes. Currently
the circle and diamond shapes are used with the following meanings:
- Input Sockets:
- Circle: Required to be a single value.
- Diamond: This input supports fields.
- Output Sockets:
- Circle: This output is a single value.
- Diamond: This output may be a field.
Connecting a field to a circle input socket is an error, since a
field cannot be converted to a single value. If the socket shape
is a diamond with a dot in the middle, it means it is currently
a single value, but could be a field.
In addition to socket shapes, the intention is to draw node links
differently based on the field status. However, the exact method for
conveying that isn't decided yet.
Differential Revision: https://developer.blender.org/D12584
Previously this was only loading built-in render passes. Now instead of trying
to load the scene render passes, load whatever passes exist in the cache file.
Using a RenderResult (or a Viewer) was never really working (think you
cant get a real ImBuff from these) -- cannot use it as a clone, stencil
or canvas [Single Image paint texture slot].
In the case of using it as a 2D paint clone image this would also crash
[due to the Image Editor drawing refactor in 2.91].
Now [in the spirit of T73182 / D11179], prevent using these where
unappropriate by using rna pointer polling functions.
Also add a security check for the 2D paint clone image crash in case a
stencil ImBuff cannot be provided for some reason, but generally old
files are now patched in do_versions_after_linking_300 (thx @brecht!).
Fixes T91625.
Maniphest Tasks: T91625
Differential Revision: https://developer.blender.org/D12609
This follows three main targets:
* Make creation of new tree UIs easy.
* Groundwork to generalize tree UIs (so e.g. Outliner, animation
channels, asset catalogs and spreadsheet data-sets don't have to
re-implement basic tree UI code) or even other data-view UIs.
* Better separate data and UI state. E.g. with this, tree-item selection
or the open/collapsed state can be stored on the UI level, rather than
in data. (Asset Catalogs need this, storing UI state info in them is
not an option.)
In addition, the design should be well testable and could even be
exposed to Python.
Note that things will likely change in master still. E.g. the actually
resulting UI isn't very nice visually yet.
The design is documented here:
https://wiki.blender.org/wiki/Source/Interface/Views
Differential Revision: https://developer.blender.org/D12573
This patch simplifies the curve object to mesh conversion
used by the object convert operator and exporters.
The existing code had a convoluted model of ownership, and did quite
a bit of unnecessary work. It also assumed that curve objects always
evaluated to a mesh, which is not the case anymore.
Now the code checks if the object it receives is evaluated. If so,
it can simply return a copy of the evaluated mesh (or convert the
evaluated curve wire edges to a mesh if there was no evaluated mesh).
If the object isn't evaluated, it uses a temporary copy of the object
with modifiers removed to create the mesh in the same way.
This follows up on the recent changes to curve evaluation,
namely that the result is always either a mesh or a wire curve.
Differential Revision: https://developer.blender.org/D12533
This adds three new methods:
* `InstancesComponent::foreach_reference_as_geometry(...)`
* `GeometrySet::attribute_foreach(...)`
* `GeometrySet::gather_attributes_for_propagation(...)`
The goal is that these iteration primitives can be used in places
where we use more specialized iterators currently.
Differential Revision: https://developer.blender.org/D12613
Put the `bUUID` class in the `blender` namespace, instead of the
`blender::bke` namespace.
As a result, some C++ code now correctly uses the C++ class, where
previously it would use the C struct and use implicit casting where
necessary. As a result, support for initializer lists had to be
explicitly coded and in another place an explicit `::bUUID` was
necessary to avoid ambiguity.
No functional change.
The shader is complicated by itself, having hardcoded values makes it
even more cryptic.
I also renamed the shader because the shader is not for the keyfarme diamond only,
but for all the keyframe shapes.
Differential Revision: https://developer.blender.org/D12615
Choosing a UV layer would actually affect the overlay in the viewport
and also painting with the mask brush was in that UV space, but the
resulting stencil mask was always applied with the active UV (not the
explicitly selected stencil UV -- the one one is looking at in the
viewport!) to painting.
This has been like that as far as I have checked back (at least 2.79b),
I am surprised this has not come up before, but it does not seem to make
sense at all...
Now use the UV specified for the stencil layer when applying the mask for
painting, so it corresponds to the stencil mask one is looking at in the
viewport.
Maniphest Tasks: T91557
Differential Revision: https://developer.blender.org/D12583
Declare the current format used for asset catalog definition files as
version 1, and write that to the files. Files without that version number
will be rejected.
This makes it much easier to move to different versions later, with the
opportunity to do versioning on file load.
The version is not associated with any version of Blender, but a separate
integer that's simply incremented when a non-backward-compatible change
happens.
Catalogs work like directories on disk (without hard-/symlinks), in that
an asset is only contained in one catalog.
See T90066 for design considerations.
#### Known Limitations
Only a single catalog definition file (CDF), is supported, at
`${ASSET_LIBRARY_ROOT}/blender_assets.cats.txt`. In the future this is
to be expanded to support arbitrary CDFs (like one per blend file, one
per subdirectory, etc.).
The current implementation is based on the asset browser, which in
practice means that the asset browser owns the `AssetCatalogService`
instance for the selected asset library. In the future these instances
will be accessible via a less UI-bound asset system.
The UI is still very rudimentary, only showing the catalog ID for the
currently selected asset. Most notably, the loaded catalogs are not
shown yet. The UI is being implemented and will be merged soon.
#### Catalog Identifiers
Catalogs are internally identified by UUID. In older designs this was a
human-readable name, which has the problem that it has to be kept in
sync with its semantics (so when renaming a catalog from X to Y, the
UUID can be kept the same).
Since UUIDs don't communicate any human-readable information, the
mapping from catalog UUID to its path (stored in the Catalog Definition
File, CDF) is critical for understanding which asset is stored in which
human-readable catalog. To make this less critical, and to allow manual
data reconstruction after a CDF is lost/corrupted, each catalog also has
a "simple name" that's stored along with the UUID. This is also stored
on each asset, next to the catalog UUID.
#### Writing to Disk
Before saving asset catalogs to disk, the to-be-overwritten file gets
inspected. Any new catalogs that are found thre are loaded to memory
before writing the catalogs back to disk:
- Changed catalog path: in-memory data wins
- Catalogs deleted on disk: they are recreated based on in-memory data
- Catalogs deleted in memory: deleted on disk as well
- New catalogs on disk: are loaded and thus survive the overwriting
#### Tree Design
This implements the initial tree structure to load catalogs into. See
T90608, and the basic design in T90066.
Reviewed By: Severin
Maniphest Tasks: T91552
Differential Revision: https://developer.blender.org/D12589
Buttons to edit asset metadata are now disabled for assets from an
external library (i.e. assets not stored in the current .blend file).
Their tooltips explain why they are disabled.
Had to do some RNA trickery to disable the metadata properties at RNA
level, not at UI script level.
The basic idea is:
* Local data-block assets set the data-block as owning ID for the asset
metadata RNA pointer now.
* That way we can use the owner ID to see where the metadata belongs to
and decide if it's editable that way.
* Additionaly, some Python operators needed better polling so they show
as grayed out, and don't just fail.
One important thing: Custom properties of the metadata can still be
edited. The edits won't be saved however. Would be nice to disable that,
but it's currently not supported on BPY/IDProperty/RNA level.
Addresses T82943.
Differential Revision: https://developer.blender.org/D12127
Make the Windows version of `BLI_dir_create_recursive()` call
`BLI_path_slash_native()` before it tries to handle the path. This
should make it possible to call it with non-native path separators.
This change was provided by our Windows platform maintainer @LazyDodo in
P2414, so I assume he agrees with this change.
This allows most tools to activate on press, removing a small but
noticeable distance between the initial press and detection of a drag
event.
Gizmo tweak no longer actives when Alt is held, to avoid conflicting
with cursor placement.
This has the advantage that the gizmo doesn't get in the way when Alt
is used for activating tools or placing the cursor.
Some gestures were activating immediately on tweak events,
extend this to mouse-press and click-drag.
Without this change, box-select for example wouldn't be automatically
activated on mouse-press.
There is no reason to lock behavior into a specific configuration in
those calls, make them properly configurable like the rest of the
link/append code.
This also enable users of those functions to activate 'ID reuse'
behavior.
in asset context, when user drag & drop a material several time, they
would still expect to re-use existing one instead of getting new copies
of it, even if this material is directly appended (and not an indirect
dependency of an object e.g.).
Flags controlling link/append code are split between two enums, one in
`DNA_space_types.h` and one in `BLO_readfile.h`.
This commit:
- Moves flags exclusively used in WM and BLO code to `eBLOLibLinkFlags`
in `BLO_readfile.h`. Flags in `eFileSel_Params_Flag` from
`DNA_space_types.h` are now only the ones effectively used by the
file browser editor code too.
- Fixes some internal utils in `readfile.c` still taking `short` flag
parameter instead of proper `int` one.
NOTE: there are a few other flags that could probably be moved to
`eBLOLibLinkFlags` (at the very least `FILE_LINK`, probably also
`FILE_AUTOSELECT` and `FILE_ACTIVE_COLLECTION`), since those are not
effectively used by the file browser, and control linking/appending
behavior, not filebrowser behavior.
However for now think it's safer to not touch that.
This commit changes the custom property edit operator to make editing
different properties types more obvious and expose more of the data,
made more easily possible by the recent UI data refactor.
Previously, the operator guessed the type you wanted based on what you
wrote in a text box. That was problematic, you couldn't make a string
property with a value of `1234`, and you had to know about the Python
syntax for lists in order to create an array property. It was also slow
and error prone; it was too easy to make a typo.
Improvements compared to the old operator:
- A type drop-down to choose between the property types.
- Step and precision values are exposed.
- Buttons that have the correct type based on the property.
- String properties no longer display min, max, etc. buttons.
- Generally works in more cases. The old operator tended to break.
- Choose array length with a slider.
- Easy to choose to use python evaluation when necessary.
- Code is commented, split up, and much easier to understand.
The custom property's value is purposefully not exposed, since the Edit
operator is for changing the property's metadata now, rather than the
value itself. Though in the "Python" mode the value is still available.
More improvements are possible in the future, like exposing different
subtypes, and improving the UI of the custom properties panel.
Differential Revision: https://developer.blender.org/D12435
This adds constrained angle mode improvements,
snapping to global and local orientation,
visible distance and angle measurements,
undo capability,
x-ray mode,
multi-object edit mode.
See https://developer.blender.org/D12600 for more details.
Note: this project moved some of the default keymappings
around a bit, as discussed with users in the thread
https://devtalk.blender.org/t/gsoc-2021-knife-tool-improvements-feedback/19047
We'll change the manual documentation in the next couple of days.
Issue caused by our patch in rB1af722b81912
we replaced an array with a memory allocation
but we forgot to update the assert which now
used an invalid method to calculate the array
size.
SVN libs will have to be updated before
T91602 will be fixed for end users.
Added description for Batch rename which pop-ups when
hovering the mouse over "Batch rename" inside the edit menu.
Fixes T91390
Reviewed By: Blendify
Maniphest Tasks: T91390
Differential Revision: https://developer.blender.org/D12594
Making object which uses volume shader invisible will mark the shader
as not having a volume, forcing re-compilation of the shader to bring
it back to a consistent state.
The compilation is happening as part of scene update, which needs to
know kernel features. So there is a feedback loop.
Use more relaxed way of knowing whether there is a volume in the
shader for the kernel features, which doesn't require shader to be
compiled first.
Solves issues from the report, but potentially causes extra memory
allocated if the volume part of graph is fully optimized out. This
downside is solvable, but would need to split scene update into two
steps (the one which requires on kernel, and the one which does not).
It will be an interesting project to tackle, but for a bug fix is
better to use simpler solution.
There was an optimization to remove duplicate storage of normals as attributes
when using normal maps. However for named attributes like this we still need to
store the attribute.
Don't request normal attribute from the normal map node now, instead of skipping it
in the geometry code.
When a new scene is created, the paint pointers are not available before using them, so the python panel exits because the pointer was None.
Now, the pointer is checked in order to display the materials panel as expected.
This commit adds to ID struct a new optional 'weak reference' to a
linked ID (in the form of a blend file library path and full ID name).
This can then be used on next append to try to find a matching local ID
instead of re-making the linked data local again.
Ref. T90545
NOTE: ID re-use will be disabled for regular append for the time being
(3.0 release), and only used for assets. Therefore, this commit should
not change anything user-wise.
Differential Revision: https://developer.blender.org/D12545
This node can be used to fillet splines at control points to
create a circular arc.
The implementation roughly follows T89227's design.
The node works in two main modes: Bezier and Poly
* Bezier: Creates a circular arc at vertices by changing
handle lengths (applicable only for Bezier splines).
* Poly: Creates a circular arc by creating vertices (as
many as defined by the Count fields input) along
the arc (applicable for all spline types).
In both modes, the radius of the created arc is defined
by the Radius fields input.
The Limit Radius attribute can be enabled to prevent
overlapping when the defined radius exceeds the maximum
possible radius for a given point.
Reviewed By: Hans Goudey
Differential Revision: https://developer.blender.org/D12115
The old modifier had two modes, but it is better to keep separated as meshes.
The UI has changed to be more consistent, including a new column type of modifiers.
Note: The logic has not changed with the previous version of the modifier, just is a split on two modifiers..
Reviewed By: mendio, pablovazquez
Differential Revision: https://developer.blender.org/D12586
Samples count pass is normalized to the overall number of samples.
This means that we need to store actual value of the samples in the
tile buffer file.
A bit annoying to pull all those settings to BufferParams and need
to find a more generic solution, but for now this is easiest and a
quickest solution.
Differential Revision: https://developer.blender.org/D12597
Adds a new operator to the pose slider tools that blends the
current pose with the neighbouring poses in the timeline.
The operator can be called in pose mode with Shift+Alt+E
or from the "pose" menu under "In betweens/Blend to Neighbour"
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D9137#inline-105214
Ref: D9137
Outliner tree building code abuse the `ID.newid` pointer to store non-ID
data. While this is bad and should be fixed at some point, for the time
being at the very least do not use ID BKE API to deal with this pointer
in that specific case, this needs its own proper code.
Reported by Thomas DInges: the default cube render in Cycles has jagged
edges during rendering. Happens on AMD Radeon RX 5500 XT.
Force linear interpolation at zoom level 1 and less.
Reviewed by @fclem
Initializing the description property was completely forgotten.
It also seems it may be missing sometimes, so use `get`.
Also, clean values when there is no data, and correctly use
the return value of `get_value_eval` in one instance.
Several areas within blender can benefit a JSON reader/writer library.
Areas like the asset browser, XR and grease pencil.
After looking at the available options we selected nlohmann's JSON for
modern C++ library. It is actively maintained for over 10 years and
flexible.
This patch only adds the header only implementation of the library so it
can be used by different areas. The asset browser project is planning to
add a small abstraction layer so it will be easier to switch between
several different serialization formats. This is currently in
development in D12544.
In cases the abstraction layer can be an overhead and undesired to be used.
In this case the header file can be directly included.
Reviewed By: Severin
Maniphest Tasks: T91430
Differential Revision: https://developer.blender.org/D12567
Up lower clamp on spec_angle to prevent NaN from being generated on intel GPUs at low roughness.
Fixes T88754
Reviewed By: fclem
Maniphest Tasks: T88754
Differential Revision: https://developer.blender.org/D12508
The XR_MSFT_controller_model OpenXR extension provides a glTF
controller model that can be displayed to users during a VR session.
There are plans to support this in D10948, which will greatly improve
VR immersion when using a compatible OpenXR runtime.
TinyGLTF (https://github.com/syoyo/tinygltf) was agreed upon as a
simple and sufficient solution for loading this glTF controller model,
which will be performed at the GHOST abstraction layer. Although by
default it has two additional dependencies, stb and json, stb can be
excluded by defining TINYGLTF_NO_STB_IMAGE and
TINYGLTF_NO_STB_IMAGE_WRITE whereas json will be added as a separate
extern lib in D12567.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D12344
This commit adds a field input node that outputs the fraction of the
total length of the spline on each control point. This is useful for
anything that involves varying a value depending on how far along
the spline it is.
It also works when evaluated on the spline domain, where it outputs
the fraction of the total length of all of the splines at the start.
The operation isn't as well defined for NURB splines for the reasons
noted in the code comment. That can be said explicitly in the docs.
Differential Revision: https://developer.blender.org/D12548
This commit adds warning messages to "legacy" nodes that will be
removed in the future. The warning is shown in the node header, but
it is not printed in the terminal or displayed in the modifier. It is
also not propogated to node groups, but that is a more general task.
If the modifier's node tree has executed a deprecated node, it will
display a warning and a "Search" button that will select the nodes and
pan to them in the node editor. This doesn't open child node trees and
select nodes in there, because I want to keep this operator simple and
avoid wasting a lot of time perfecting this behavior.
Differential Revision: https://developer.blender.org/D12454
Rename the `UUID` struct to `bUUID`. This avoids a symbol clash on
Windows, which also defines `UUID`. This only pops up when a `UUID`
field is used in the DNA code, which is why it wasn't a problem before
(it will be once D12589 lands).
No functional changes.
With this commit, each referenced instance data will be converted to
a geometry instances and processed separately. This should result in
a large speedup when the instances component has many insances
referring to the same data.
This change can act as a blueprint for other nodes that need to
implement similar behavior. It adds some helper functions on the
instances component to make that easier.
Thanks to Erik Abrahamsson for a proof of concept patch.
Differential Revision: https://developer.blender.org/D12572
This patch adds four new nodes to a new "Text" category:
- String Length: Outputs length of a string
- String Substring: Outputs part of a string
- Value to String: Converts a value to a string
- String Join: Concatenates multiple strings with a delimiter
The initial use case of these nodes is the upcoming string to curve
node. However, they could also be used to calculate dynamic attribute
names, or with string attributes in the future.
Differential Revision: https://developer.blender.org/D12532
This node outputs the direction vector, or tangent of a curve at every
control point. For poly splines this is simply the evaluated tangents,
so it all works very simply. For Bezier splines it uses the tangent at
the evaluated point corresponding to each control point, and NURBS
are interpereted as poly splines built from their control points.
Internally the node is called "Input Tangent" to simplify using it for
mesh tangents as well in the future like the "Normal" node.
Differential Revision: https://developer.blender.org/D12581
Currently, the drop indicator colors are hardcoded to white text on semi-transparent black background.
This patch makes the drop indicator use the tooltip theme settings, as they serve a similar purpose.
{F10530482, size=full}
All built-in themes seem to work well and got improved readability.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D12588
rB8e21d528cab98 neglected to add versioning to add the new
"use_attribute" and "attribute_name" properties to the modifier input
list. Though they are added if the modifier's interface is updated, that
doesn't happen when the file is loaded, so patch adds them manually.
Another solution would be calling `MOD_nodes_update_interface`,
but that would require including the modifiers module.
Differential Revision: https://developer.blender.org/D12535
I plan to use this for curve object data conversion to mesh in D12533,
and possibly for the implicit curve to mesh conversion in the curve
and text object modifier stack in the future.
Differential Revision: https://developer.blender.org/D12585
The versioning has to have different behavior for when the old default
value had a float type rather than a double type. Also use memcpy
rather than dupalloc, since it's a bit clearer.
It is valid to e.g. copy construct an integer in the same place,
because it is a trivial type. It does not work for types like std::string.
This fixes a crash reported in D12584 where it would copy a buffer
into itself. We should probably also avoid doing this copy alltogether
but that can be done separately.
Extend the stroke following an approximated circluar/helical curve.
This can be used as an effect for lineart or on its own as helix generator.
Reviewed By: Sebastian Parborg (zeddb), Hans Goudey (HooglyBoogly), YimingWu (NicksBest), Antonio Vazquez (antoniov), Henrik Dick (weasel)
Differential Revision: https://developer.blender.org/D11668
# 请为您的变更输入提交说明。以 '#' 开始的行将被忽略，而一个空的提交
# 说明将会终止提交。
#
# 位于分支 master
# 您的分支与上游分支 'origin/master' 一致。
#
# 要提交的变更：
# 修改： source/blender/blenkernel/BKE_gpencil_geom.h
# 修改： source/blender/blenkernel/intern/gpencil_geom.cc
# 修改： source/blender/gpencil_modifiers/intern/MOD_gpencillength.c
# 修改： source/blender/makesdna/DNA_gpencil_modifier_defaults.h
# 修改： source/blender/makesdna/DNA_gpencil_modifier_types.h
# 修改： source/blender/makesrna/intern/rna_gpencil_modifier.c
#
The issue was caused by `textureSize()` returning the size of the level 0
even when the min texture level is higher than 0.
Using a uniform to pass the correct size fixes the issue.
This issue also affected the downsampling of radiance for reflections and
refractions.
This does not affect anything other than the recusive downsampling shaders.
This includes much improved GPU rendering performance, viewport interactivity,
new shadow catcher, revamped sampling settings, subsurface scattering anisotropy,
new GPU volume sampling, improved PMJ sampling pattern, and more.
Some features have also been removed or changed, breaking backwards compatibility.
Including the removal of the OpenCL backend, for which alternatives are under
development.
Release notes and code docs:
https://wiki.blender.org/wiki/Reference/Release_Notes/3.0/Cycleshttps://wiki.blender.org/wiki/Source/Render/Cycles
Credits:
* Sergey Sharybin
* Brecht Van Lommel
* Patrick Mours (OptiX backend)
* Christophe Hery (subsurface scattering anisotropy)
* William Leeson (PMJ sampling pattern)
* Alaska (various fixes and tweaks)
* Thomas Dinges (various fixes)
For the full commit history, see the cycles-x branch. This squashes together
all the changes since intermediate changes would often fail building or tests.
Ref T87839, T87837, T87836
Fixes T90734, T89353, T80267, T80267, T77185, T69800
Draw thumbnails as strip overlay. This works for movie and image strips.
To draw thumbnails, this overlay has to be enabled and strips must be
tall enough.
The thumbnails are loaded from source file using separate thread and
stored in cache.
Drawing code uses only images stored in cache, and if any is missing,
background rendering job is started. If job can not render thumbnail,
to prevent endless loop of creating job for missing image it sets
`SEQ_FLAG_SKIP_THUMBNAILS` bit of `Sequence` flag.
To prevent visual glitches during timeline panning and zooming, `View2D`
flag `V2D_IS_NAVIGATING` is implemented. If bit is set, drawing code
will look for set of evenly distributed thumbnails that should be
guaranteed to exist and also set of previously displayed thumbnails.
Due to volatile nature of cache these thumbnails can be missing anyway,
in which case no new thumbnails will be drawn for particular strip.
Cache capacity is limited to 5000 thumbnails and performs cleanup of
non visible images when limit is reached.
ref T89143
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D12266
Add tools for image manipulation in sequencer preview region.
This includes:
- Translate, rotate and resize operators, tools and gizmos
- Origin for image transformation
- Median point and individual origins pivot modes
- Select and Box select operator works in preview
- Image overlay drawing
ref T90156
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12105
This is used to find a valid collection in which to instantiate stray
objects and collections.
In some cases there will be no such active view layer, in which case we
can consider using the Scene's master collections children hierarchy
instead to find a valid instantiated parent collection for those stray
data.
With the LMB select key-map some tools required clicking on a gizmo.
With this preference it's possible to hold Alt and click anywhere.
Addresses T83689.
Expose a key-map preference "Fallback Tool (RMB)",
disabled by default.
The right mouse button uses the fallback tool
(currently visible selection tool in the toolbar),
instead of always tweaking.
When any selection tool is active, right mouse always tweaks.
To enable fallback selection on RMB, set the "Right Mouse Select Action"
to "Selection Tool".
Internal changes:
- Add fall-back key-maps, separate key-maps needed for when the tool is
run as a fall-back. This is needed so RMB-select can support fall-back
tools, so left-mouse can be used when it's the active tool and RMB
can be used as a fall-back action when another tool is active.
- Add options field to tools so tools without gizmos can enable the
full-back tool keymap.
- Support multiple key-maps for keymap handlers.
- Fall-back keymaps now co-exist with the tool-keymaps.
So both keymaps may be active at once - using different mouse buttons.
When gizmos are in use, a highlighted gizmo prioritizes the
tool-keymap over the fall-back keymap.
Resolves T83690.
Reviewed By: JulienKaspar
Ref D12493
Some selection operators return (PASS_THROUGH & FINISHED) so the tweak
event isn't suppressed from the PRESS event having been handled.
This is now restricted to events with a PRESS action.
Without this, using CLICK for selection was passing the event through
which could run other actions unintentionally.
This node allows sampling positions, tangents, and normals at any
arbitrary point along a curve. The curve can include multiple splines,
all are taken into account. The node does not yet support transferring
generic attributes like radius, because some more general tooling will
make that much more feasible and useful in different scenarios.
This is a field node, so it is evaluated in the context of a data-flow
node like "Set Position". One nice thing about that is it can easily
be used to move an entire geometry like the follow path constraint.
The point along the curve is chosen either with a factor of the total
length of the curve, or a length into the curve, the same choice used
in the curve trim node.
Differential Revision: https://developer.blender.org/D12565
This nodes evaluates a field on a geometry and outputs various
statistics about the entire data set, like min, max, or even
the standard deviation. It works for float and vector types currently,
though more types could be supported in the future.
- All statistics are calculated element-wise for vectors.
- "Product" was not added since the result could very easily overflow.
- The "Size" output was not added since it isn't specific to an
attribute and would fit better in another node.
The implementation shares work as much as possible when multiple
statistics are needed.
This node has been in development since the beginning of this year,
with additions from Johnny Matthews and Hans Goudey.
Differential Revision: https://developer.blender.org/D10202
There may be mode specific panels for some assets in the navigation or
the asset metadata sidebar. For example the pose library will likely do
this. So let the regions redraw on mode changes.
This change makes the Set Position node do nothing by default.
Before, the geometry would always disappear, because it all points
would be moved to (0, 0, 0).
Differential Revision: https://developer.blender.org/D12553
Change of File Browser "Favorites" section header in source list
(T panel) to "Bookmarks" to maintain consistency with all the other
bookmark-related text and operations.
See D10262 for more information and alternatives considered.
Differential Revision: https://developer.blender.org/D10262
Reviewed by Julian Eisel
"iff" was intended as "if and only if". while exact use of abbreviations
isn't clear cut, I assumed this was a typo & it's not used anywhere
else in source/, expand to "only if" (suggested by Sybren).
This makes the Noise Texture node available in geometry nodes.
It should behave the same as in shader node, with the exception
that it does not have an implicit position input yet. That will
be added separately.
Differential Revision: https://developer.blender.org/D12467
Previously, the node would always realize instances implicitly.
Now it can change the position of entire instances.
The Realize Instances node can be used before if the old
behavior is required.
Differential Revision: https://developer.blender.org/D12555
Issue revealed by rB546314fc9669 change, also error itself exited before
that commit.
Now we do accept git command to fail when trying to checkout the
specified branch from sub-modules, and only actually error in case the
fall-back branch (aka master) cannot be properly checked out.
Thanks fot Ray molenkamp (@LazyDodo) for report and initial patch
(D12560).
This node has a simple geometry input and output.
If the input geometry contains instances, they will be realized
into actual geometry. When there are many instances, this can
be very slow and memory intensive. Generally, instances should
only be made real when necessary, e.g. when every instance
should be deformed independently.
Differential Revision: https://developer.blender.org/D12556
On Apple machines, call `clock_gettime()` instead of `timespec_get()`.
macOS only introduced `timespec_get()` in version 10.15 (introduced
approx two years ago, so in 2019), even though the function is from C11.
XOR the 'seconds' and 'nanoseconds' fields of the current time to seed the
RNG used for generating random UUIDs. This ensures a better seed just in
case the clock as no sub-second resolution.
The API was checking the number of total weights with the first point of the stroke and this was not valid because each point can have different number of weight elemnts,
The case that checked whether there were evaluated edges was incorrect,
since two points are needed for an edge. Then also avoid running the
accumulation for an empty span.
It's equivalent to the OpenImageDenoise prefiltering option in Cycles.
See D12043.
Prefilter modes:
- None: No prefiltering, use when guiding passes are noise-free.
- Fast: Denoise image and guiding passes together. Improves quality when
guiding passes are noisy using least amount of extra processing time.
- Accurate: Prefilter noisy guiding passes before denoising image.
Improves quality when guiding passes are noisy using extra
processing time.
Reviewed By: #compositing, jbakker, sergey
Differential Revision: https://developer.blender.org/D12342
The enum called "interpolate" was really a choice of methods for mapping
inputs to positions on the curve, whereas the "sample" enum was used to
define a way to create a whole set of new points from the curve, without
any input parameters. The "re-sample" vs. "sample" naming makes that
distinction better.
On the blender side this commit fixes importing video files with audio
and video streams that do not share the same start time and duration.
Differential Revision: https://developer.blender.org/D12353
After new AUD API changes from 2.8x what "buffer" function used to do
has now become "cache" function (it caches a sound into RAM). Therefore,
the basic aud example should call this new "cache" function instead of
"buffer" function.
Thanks to Michael-Z-Freeman for pointing out.
since `AssetHandle` does not have a `name_property`
(`RNA_def_struct_name_property`), and the UIList is just using the
default `uilist_filter_items_default` it simply cannot filter on names
(`RNA_struct_name_get_alloc` wont succeed).
Adding a name_property also wont work since `AssetHandle` inherits
`PropertyGroup` (which already sets name_property).
So this adds a (temporary) hack exception for RNA_AssetHandle in
uilist_filter_items_default until the design of `AssetHandle` progresses
further.
thx @Severin for additional feedback
Maniphest Tasks: T91461
Differential Revision: https://developer.blender.org/D12541
This patch allows Asset Browser previews to be made regardless
of the setting of the (unrelated) "File Preview Type" Preference.
See D12484 for more details.
Differential Revision: https://developer.blender.org/D12484
Reviewed by Julian Eisel
Use the inverse of the grease pencil object. This patch fixes the issue for bones and objects.
Maniphest Tasks: T91481
Differential Revision: https://developer.blender.org/D12539
Add `BLI_uuid` and `DNA_uuid_types.h` with a UUID implementation
following RFC4122 (https://datatracker.ietf.org/doc/html/rfc4122.html).
The following features are implemented:
- A struct of 128 bits that can be used in DNA definitions.
- Generation of version 4 UUIDs, that is, purely random ones.
- UUID equality function.
- String to UUID and UUID to string conversion functions that are
compatible with RFC4122.
- C++ stream operator that outputs the UUID as string.
This UUID will be used by the asset system, to uniquely identify asset
catalogs.
Reviewed By: Severin, jacqueslucke
Differential Revision: https://developer.blender.org/D12475
When using FModifier `Restrict Frame Range`, the resulting influence was
zero being exactly on `Start` / `End` range borders (so borders were
**exclusive**).
This made it impossible to chain FModifers together (forcing the user to
specify values slightly below the desired border in following
FModifiers).
This is now corrected to be **inclusive** on Start / End range borders.
Before
{F10234864}
After
{F10234865}
Testfile
{F10234866}
In the case of touching open borders (so [frame A frame B] followed by
[frame B frame C]) both modifiers are evaluated (in stack order).
If the later modifier has full influence (and is not additive) this simply
means the result is the same as the later modifier's value.
If influences below 1 are used (or modifiers are additive) both modifier's
values are interpolated/added accordingly.
technical notes:
- this was caused by the introduction of FModifier Influence/BlendIn-Out
in rB185663b52b61.
- for comparison, see other occurrences of
`FMODIFIER_FLAG_RANGERESTRICT`.
- the following conditions in `eval_fmodifier_influence` for blend in/
out have been changed accordingly.
Maniphest Tasks: T85564
Differential Revision: https://developer.blender.org/D10401
Change KeyMapItem.alt/ctrl/shift/oskey to integer types,
where -1 is used to ignore the modifier when matching key-map items.
It was only possible to set all modifiers to -1 at once from RNA
using the 'any' property.
Afterwards individual modifiers could be set back to true/false.
Although these key-map items could not be exported/imported.
Exposing the values directly avoids the need for cumbersome workarounds.
These were added in a1c8543f2a (2007)
but never used.
Nor did they have any meaning in practice.
Note that versioning keymap items isn't needed as these values were
never set. The code-paths that set these values also set KM_MOD_FIRST
causing `keymap_event_set` to only ever assign values of 0 or 1.
These flags complicate further exposing KM_ANY (-1)
which is also a valid value for modifiers.
- Show "Lasso Select" in menus (along with Box & Circle select)
- Show "Extrude to Cursor" (along with other extrude actions).
- Rename operators that add/extrude on Ctrl-Click
since their names were inconsistent.
This is mainly for discoverability.
While the screenshot operator showed an "Area" option,
it wasn't usable from the main menu (unless accessed via menu search).
Split screenshot area into an operator that depends on cursor.
Support waiting for input so operators that depend on the
cursor location are usable from menus / buttons.
Use an operator type flag which the user interface code checks for,
waiting for input when run from a menu item.
This patch only supports this feature, there are no functional changes.
The motivation for this change is discoverability since some actions
were either hidden or broken when accessed from menus
(where the behavior of the operator depended on the menu location).
In general, waiting for input is *not* an efficient way to access tools,
however there are over 50 operators with a "wait_for_input" property
so this isn't introducing a new kind of interaction,
rather exposing this in a way that does not need to be hard-coded into
each operator, or having modal callbacks added for the sole purpose
of waiting for input.
Besides requiring boiler plate code using a "wait_for_input" property
has the added down-side of preventing key shortcuts from showing.
Only the menu items will enable the property,
causing them not to match key-map items.
Reviewed By: Severin
Ref D12255
An issue with the previous commit-- the default value of the type was
used instead of the property value when the "use_attribute" property
was missing.
This adds a toggle to node group inputs exposed in the modifier to use
an attribute instead of a single value. When the toggle is pressed, the
button switches to a text button to choose an attribute name. Attribute
search isn't implemented here yet.
One confusing thing is that some values can't be driven by attributes
at all, like the size of a primitive node. In that case, we should have
a node warning, but that will be separate since it's more general.
We can also have an option to turn off this toggle in node group
input settings.
The two new properties for each input are stored with the same name
as the value, but with `"_use_attribute"` and `"_attribute_name"``
suffixes. The properties are not added for socket types that don't
support attribute input, like object sockets.
Differential Revision: https://developer.blender.org/D12504
Adds an "Auto" option to blend thumbnail types that will automatically
use Screenshot if there is no camera and 3dview, or workbench render
with shading settings from the largest 3dview.
See D12407 for more details.
Differential Revision: https://developer.blender.org/D12407
Reviewed by Campbell Barton
This should allow easier changes when it's helpful to use C++ types.
The diff is for a test on the buildbot.
Differential Revision: https://developer.blender.org/D12528
When saving blend files close any menus that might be open, show
"waiting" mouse cursor right away, before creating preview.
See D12507 for more details.
Differential Revision: https://developer.blender.org/D12507
Reviewed by Campbell Barton
This patch allows point and spline attributes to be transferred to the
mesh generated by the curve to mesh node. All dynamic named and
anonymous attributes are transferred. So a user-created attribute will
be transferred, but "radius", "tilt" or the handle position attributes
won't be transferred by default and will need to be copied first.
This trade-off is made for performance, since most of the time, users
won't need these attributes copied.
Generally, attributes are transferred to the point/vertex domain.
However, if they have the same name as a built-in mesh attribute that
only exists on a different domain, like "shade_smooth", then they can
be transferred directly to that domain as well. Conversion directly to
the face corner domain is not necessary because there are no builtin
face corner attributes. I see this conversion directly to other domains
as an optimization we could use behind the scenes in the future as well,
when named attributes are less common.
For performance, I haven't tested which of the following is better:
```
for each spline combination:
for each attribute:
for each attribute:
for each spline combination:
```
For now I used the existing loop to avoid more threading overhead.
Differential Revision: https://developer.blender.org/D12363
Store the optional temporary span storage as a unique_ptr and move
it in the move constructor, to avoid the need to add a special move
constructor that clears the "show_warning" fields from it. Maybe this
is very slightly slower, but we'll need this class less often in the future
anyway.
"App" is a name reserved for the application templates at the moment.
It may become its own term in the near future if Templates are separated
from "Apps".
So since this is a name not exposed to the users we should renamed it
sooner than later.
Note that this will require scripts to update since the name of the
class is renamed here.
This also requires an update in the User Manual.
Differential Revision: https://developer.blender.org/D12523
With this, asset libraries can be directory structures and all assets in
sub-directories will show up in an Asset Browser.
With complex directory structures and many .blend files inside, asset
library reading will be quite slow for now. There's initial work being
done to introduce indexing for this (T82979), other optimizations are
being discussed as well.
Addresses T91406.
Differential Revision: https://developer.blender.org/D12139
The toggle that allow users to "show" the region (header, toolbar, ...)
when it is collapsed can now be configured for the apps.
Note: This option is not visibile in the UI.
Differential Revision: D12516
This breaks API compatibility. However we are now grouping this setting
in the proper section (preferences.apps), so scripts had to update anyways.
So they may as well do it for the final name.
The reason to remove from the UI is that this is intended for app setup,
and as such it should not be exposed to final users until we have apps
better presented (for 3.1 hopefully).
Differential Revision: D12516
There will be other settings that lock other aspects of the
UI layout (e.g., resizing of editors). So better to name
this setting what it actually handles (the corners).
New name: USER_APP_LOCK_CORNER_SPLIT
Differential Revision: D12516
Add needed extra flag and utils to IDType to mark and check an ID type
as only appendable.
Note that this is only a loose user-level enforcement currently, in any
case you need to be able to link an ID to append it currently, so for
low-level code this does not really matter.
Currently only WorkSpace and Screen ID types are marked with the new
`IDTYPE_FLAGS_ONLY_APPEND` flag.
While likely harmless, this code was doing extremely bad thing,
by-passing the whole lower-level `BKE_lib_id_make_local` call in case it
would fail and deciding by itself to forcefully make the given ID local.
Bad. Very, very, very bad.
Callbacks in IDTypeInfo should never affect other IDs if they are not
embedded.
We break this rule in some cases, at least each of those should be
clearly commented about and get some security checks to try to avoid
unexpected issues as much as possible.
Mixing testing and actual action in a single function is just not a good
way to do things, and the 'testing' feature is not used anywhere
anymore, time to get rid of it.
This flag became a full duplicate of `IDTYPE_FLAGS_NO_LIBLINKING`, which
is a good thing (don't think we ever want to be able to link some data,
without being able to make it local...).
So we can now remove it and use `IDTYPE_FLAGS_NO_LIBLINKING` instead.
Toggling the selection off in the node is the same as muting it,
so exposing it there doesn't help, and makes it less clear that it's
meant to be used as a field.
This moved the spline reversing logic out of the Curve Reverse geometry
node and into the spline class. This allows a spline to reverse itself
with a call to `my_spline.reverse()`
The base class will reverse position, radii & tilt, while specialized
versions are created for Bezier and Nurbs splines to reverse the
additional data that these classes encapsulate.
Differential Revision: https://developer.blender.org/D12501
Essentially, Workspace (and Screen) types were defined as not
localizable.
In previous code it happended to work by mere chance (code path taken in
`BKE_library_make_local` was conviniently skipping the call to
`BKE_lib_id_make_local` in that case, hence not checking for
`IDTYPE_FLAGS_NO_MAKELOCAL` flag of the localized ID type).
This is a total abuse of this IDType flag, for now removing it.
That specific case (IDtype appendable but nor linkable) requires its own
proper flag, this will be tackled in a later commit.
Issue introduced in rB3be5ce4aad5e.
Scene and related pointer parameter can be NULL in link/append code, in
which case there is no instantiation of new objects/collections/obdata.
Link code in blendloader was already checking that, new instantiation
code in WM area from yesterday did not.
Issue introduced by rB3be5ce4aad5e.
Add a method that allows a MutableSpan to reverse itself. This reverses
the data in the original span object. This is a first step in extracting
some functionality from nodes and making it more general.
Differential Revision: https://developer.blender.org/D12485
This commit moves the old material nodes to a "legacy" folder and adds
versions of the nodes that work with fields.
The "Select by Material" node is a field node now, so it doesn't have
a geometry output. This is an improvement because there are fewer links
to connect, and it's more easily usable in different situations.
It's also called "Material Selection", since it's more of an input
than an action now.
It's sometimes necessary to use the attribute capture node to get a
more predictable interpolation to mesh faces. This is because the
selection field input is always evaluated on the face domain, so
attribute inputs are interpolated before they are booleans, so they
cannot use the new interpolations from rB5841f8656d9580d7b9.
Differential Revision: https://developer.blender.org/D12456
The generic domain interpolation algorithms didn't quite work for
selections. The interpolation would do unexpected things that
were different than the results in edit mode. The new behavior
is supposed to be the same as edit mode, although we also have
to handle face corner selections here.
Currently the code assumes that all boolean attributes should be
handled that way. I'm not sure of why that wouldn't be the case,
but if we ever need non-selection boolean attributes, that could
be supported too.
Differential Revision: https://developer.blender.org/D12488
This commits adds a few common flags to `SocketDeclaration`
so that they are available for all socket types (hide label, hide
value, is multi input). This allows porting over the remaining
geometry nodes to the new declaration system.
Furthermore, this commit separates the concepts of the socket
declaration and corresponding builders. The builders are used
by nodes to declare which sockets they have (e.g. `FloatBuilder`).
The ready build socket declarations can then be consumed by
other systems such as the versioning code. Both use cases
need different APIs and those will change for independent reasons,
so it makes sense to separate the classes.
This allows a hack to be removed that temporarily overwrote
the 3D views gizmo display flag.
Also reverse change from fb27a9bb98
that runs poll on modal gizmo groups as there is some risk
that the poll function unlinks the gizmo.
In {rB9cff9f9f5df0} asset_library was renamed → asset_library_ref.
Missed to update this in assets.py.
Differential Revision: https://developer.blender.org/D12497
This adds a new `ParallelMultiFunction` which wraps another multi-function
and evaluates it with multiple threads. The speeds up field evaluation
quite a bit (the effect is most noticeable when the number of evaluations
and the field is large).
There are still other single-threaded performance bottlenecks in field
evaluation that will need to be solved separately. Most notably here
is the process of copying the computed data into the position attribute
in the Set Position node.
Differential Revision: https://developer.blender.org/D12457
Follow up to fix for T73684,
which allowed some modal gizmos to hide all others.
Also resolve an issue from 917a972b56
where shear the shear gizmo would be visible during interaction.
Internally there are some changes to gizmo behavior
- The gizmo with modal interaction wont draw if it's poll function fails.
- The WM_GIZMOGROUPTYPE_DRAW_MODAL_ALL flag now causes these gizmo
groups to draw when another group is being interacted with.
Create dot-dash effect for grease pencil strokes. User can manually edit the length, gap and styles for each segment of dashed lines.
The values in each segment can all be key-framed to make animations.
Reviewed By: Hans Goudey (HooglyBoogly), Antonio Vazquez (antoniov)
Differential Revision: http://developer.blender.org/D11876
This allows crease lines to be automatically hidden on smooth surfaces, also provided options for:
- Showing crease on marked sharp edges.
- Force crease detection on smooth surfaces.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: http://developer.blender.org/D12051
A temporary string was created in the attribute_foreach callback
and used in a map at a higher scope. When the callback finished,
the string went out of scope, was freed, then the elements in the
set pointed to freed memory.
After applying the pose breakdowner,
the "factor" slider in the redo panel wasn't set to the correct value
This would cause the pose to jump around
once you start dragging the slider
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D12187
Ref: D12187
This commit fully refactors the way linked IDs are made local when
appended.
Previously, `BKE_library_make_local` was (ab)used for this task, but it
was missing some contextual data and doing complex processing to try to
work around this, with limited sucess. Further more, it was nearly
impossibe to extend (e.g. to get new append behaviors necessary for the
asset project).
The new code is a dedicated append step in WM linking process.
NOTE: BPY API (`libray.load()` context manager) uses its own code here,
which still relies on `BKE_library_make_local` for appending.
Unfortunately, merging those two different code paths is not trivial so
for now this API will remain unchanged.
Fix T55629: Append already linked Data is impossible.
Current `BKE_libblock_relink_to_newid` is using its own simplistic,
limited and not really correct version of ID remapping.
While doing a full replacement would have been ideal, this is
risky/time-constrained for Blender 3.0 release, so for now we'll have
both versions co-existing.
Previously, it was necessary to rebuild the node declaration
every time it was used. Now it is cached per node for easy
and fast access.
For more details on what this is, look at the comment in
`DNA_node_types.h`.
Differential Revision: https://developer.blender.org/D12471
Previously, a debug name had to be passed to all methods
that added a resource to the `ResourceScope`. The idea was
that this would make it easier to find certain bugs. In reality
I never found this to be useful, and it was mostly annoying.
The thing is, something that is in a resource scope never leaks
(unless the resource scope is not destructed of course).
Removing the name parameter makes the structure easier to use.
Sometimes not all outputs of a multi-function are required by the
caller. In those cases it would be a waste of compute resources
to calculate the unused values anyway. Now, the caller of a
multi-function can specify when a specific output is not used.
The called function can check if an output is unused and may
ignore it. Multi-functions can still computed unused outputs as
before if they don't want to check if a specific output is unused.
The multi-function procedure system has been updated to support
ignored outputs in call instructions. An ignored output just has no
variable assigned to it.
The field system has been updated to generate a multi-function
procedure where unused outputs are ignored.
In contrast to the Filebrowser, the Outliner (Blender File view) did not
distinguish icons for text-based formats (if they have a filepath this
can be done though).
Maniphest Tasks: T90862
Differential Revision: https://developer.blender.org/D12347
This allow users to show/hide:
* Library name / refresh.
* Assets names.
* Filter.
To set them in Python use:
display_options={'NO_NAMES', 'NO_FILTER', 'NO_LIBRARY'}
With contributions by Julian Eisel.
Differential Revision: https://developer.blender.org/D12476
Curve Points of handle of type `Auto` on curves not uniformly scaled
cause the shape of the curve to be modified after applying the scale.
So change these handles to `Aligned` in these cases.
Reviewed By: campbellbarton
Maniphest Tasks: T90736
Differential Revision: https://developer.blender.org/D12281
Changing active side was introduced in {rB7ff6bfd1e0af} but was never
working for tools/operators other than the sculpt line mask tool.
While for most tools/operators this actually does not make sense, the
bisect tool/operator can actually benefit from it.
thx @campbellbarton for additional input!
Maniphest Tasks: T91320
Differential Revision: https://developer.blender.org/D12473
This was implemented in {rB14d56b4217f8} but was never working for
tools/operators other than the sculpt line mask tool.
To be precise, the preview actually snapped but the operations (e.g.
mesh bisect, vertex weight gradient) still happened "unsnapped" in
modal. For the sculpt line mask tool this wasnt a problem, because it
only draws a preview while modal, the actual mask was only applied
later.
This solves part one of T91320 (snapping), sculpting also introduced
flipping in {rB7ff6bfd1e0af} which does not make much sense for all
tools, but in bisect this could actually be supported, will add that in
a separate Diff.
ref T91320
Maniphest Tasks: T91320
Differential Revision: https://developer.blender.org/D12470
* Splash Disable
* Show gizmo navigate
* ui scale
It is a bit arbritrary now. So those are the flags I'm
setting up for the Blender 101 project (T90025).
Differential Revision: https://developer.blender.org/D12474
Introduced `BKE_packedfile_unpack` that is called from the specialized
implementation for Image, Sound, Font, Volume etc. This is in
preparation for T91252.
Instead of comparing the referenced field node by pointer,
compare the nodes directly instead. This is important
because different field nodes might be the same semantically.
rB546314fc9669 broke `svn_libraries_base_url` utils API compatibility
for no good reasons, making new `branch` argument explicitely optional.
Reported on chat by Michael Kowalski (@makowalski), thanks!
Creating some primitives allows for a scale value (via python) that will
scale the object accordingly. For objects with a radius parameter
(like cylinders, spheres, etc.) passing a scale different to (1,1,1)
would result in unexpected behavior.
For example:
`>>> bpy.ops.mesh.primitive_uv_sphere_add(radius=2, scale=(1,1,2))`
We would expect this to create a sphere with a radius of 2
(dimensions 4,4,4) and then be scaled *2 along the z-axis
(dimensions 4,4,8). But this would previously create a scaled sphere
with dimensions (2,2,4).
The scale was simply divided by two. Maybe because the "radius"
parameter for creating the primitives was confusingly named "diameter"
(but used as the radius).
The fix adds a scale parameter to `ED_object_new_primitive_matrix`
and also renames the wrongly named "diameter" parameters to "radius".
Reviewed By: campbellbarton
Maniphest Tasks: T84638
Ref D10093
With this commit, curve objects support the geometry nodes modifier.
Curves objects now evaluate to `CurveEval` unless there was a previous
implicit conversion (tessellating modifiers, mesh modifiers, or the
settings in the curve "Geometry" panel). In the new code, curves are
only considered to be the wire edges-- any generated surface is a mesh
instead, stored in the evaluated geometry set.
The consolidation of concepts mentioned above allows remove a lot of
code that had to do with maintaining the `DispList` type temporarily
for modifiers and rendering. Instead, render engines see a separate
object for the mesh from the mesh geometry component, and when the
curve object evaluates to a curve, the `CurveEval` is always used for
drawing wire edges.
However, currently the `DispList` type is still maintained and used as
an intermediate step in implicit mesh conversion. In the future, more
uses of it could be changed to use `CurveEval` and `Mesh` instead.
This is mostly not changed behavior, it is just a formalization of
existing logic after recent fixes for 2.8 versions last year and two
years ago. Also, in the future more functionality can be converted
to nodes, removing cases of implicit conversions. For more discussion
on that topic, see T89676.
The `use_fill_deform` option is removed. It has not worked properly
since 2.62, and the choice for filling a curve before or after
deformation will work much better and be clearer with a node system.
Applying the geometry nodes modifier to generate a curve is not
implemented with this commit, so applying the modifier won't work
at all. This is a separate technical challenge, and should be solved
in a separate step.
Differential Revision: https://developer.blender.org/D11597
Calms warning for unused variable in `constraint_copy_to_selected_poll`
by using UNUSED_VARS.
See D12453 for further details
Differential Revision: https://developer.blender.org/D12453
Reviewed by Campbell Barton
Since fields were committed to master, socket inspection did
not work correctly for all socket types anymore. Now the same
functionality as before is back. Furthermore, fields that depend
on some input will now show the inputs in the socket inspection.
I added support for evaluating constant fields more immediately.
This has the benefit that the same constant field is not evaluated
more than once. It also helps with making the field independent
of the multi-functions that it uses. We might still want to change
the ownership handling for the multi-functions of nodes a bit,
but that can be done separately.
Differential Revision: https://developer.blender.org/D12444
Now an instruction knows the cursors where it is inserted instead
of just the instruction that references it. This has two benefits:
* An instruction knows when it is the entry instruction.
* The cursor can contain more information, e.g. if it is linked to the
true or false branch of a branch instruction.
This also simplifies updating the procedure in future optimization
passes.
Mostly renaming the variables to improve line wrapping.
But also the "foreach_attribute" loops look simpler now.
Also use `Spline::copy_base_settings` and don't bother
with an extra call to reallocate the attribute arrays.
Just like the curve to points node, this mode outputs point locations
based on the input curve's evaluated points (the points you see in the
viewport). This is expected to be faster, since it doesn't have to
sample equal positions on the result, and it's also consistent with
the existing choices in the curve to points node.
Improvements to Quad View options' titles and descriptions.
See D12381 for more details.
Differential Revision: https://developer.blender.org/D12381
Reviewed by Hans Goudey and Campbell Barton
rBe2f99c338bd57 should have used the subversion currently defined
in Blender, instead it used one lower, so some files didn't have the
versioning applied.
It appears an old version of this file was committed by accident. The
intended change to remove sculpt layers was done in versioning code and
does not require a modified startup.blend.
Flag the changed object and its bones to update after moving a
constraint in the stack up or down. The two operators for move up and
move down seem to be unused, but I notices they had the same problem, so
I added the update there as well.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D12174
Refactor of our Vfont check for font validity.
See D12068 for further details.
Differential Revision: https://developer.blender.org/D12068
Reviewed by Campbell Barton
Recently we have decided to avoid fancier versioning for nodes with
string inputs for attribute names when updating the attribute workflow
for 3.0. In that case we would just duplicate any node that will
have an updated version to work with fields.
We want to be able to use the "proper" ID names for the new versions
of the nodes though, so this patch adds "Legacy" to the IDs of all
nodes that will be replaced in 3.0. This commit also removes the nodes
from the add menu when the fields experimental preference is enabled,
in order to make it clear what has been updated and what hasn't.
Nodes in the "Maybe" categories in versioning_300.c can be renamed
later if necessary. For now it's probably better to be conservative,
and to keep the list complete.
Differential Revision: https://developer.blender.org/D12420
Previously fluid simulation and Alembic modifiers had a dedicated function
to query the velocity for motion blur. Now use a more generic system where
those modifiers output a velocity attribute.
Advantages:
* Geometry and particle nodes can output velocity through the same mechanism,
or read the attribute coming from earlier modifiers.
* The velocity can be preserved through modifiers like subdivision surface or
auto smooth.
* USD and Alembic previously only output velocity from fluid simulation, now
they work with velocity from other sources too.
* Simplifies the code for renderers like Cycles and exporters like
Alembic and USD.
This breaks compatibility:
* External renderers and exporters accessing these velocities through the
Python API now need to use the attribute instead.
* Existing modifier node setups that create an attribute named "velocity"
will render differently with motion blur.
Differential Revision: https://developer.blender.org/D12305
Use `_PyThreadState_UncheckedGet()` to check that the current thread is
tracked by Python before checking whether it has the GIL. The latter
will abort when the former is false.
For some reason the asset preview isn't created or loaded correctly in
some instances. This could be addressed with D9974, but hard to tell
since I only have a failing .blend file, no steps to recreate it from
scratch.
Would crash when opening an Asset Browser, selecting an object asset
(that has an invalid preview stored) and opening the Asset Browser
sidebar, so that the preview is visible there.
This enabled multithreaded building of the keys that needs to be drawn
in the timeline (and other action editors).
On an AMD Ryzen 3800 using a mocap data test file (available in patch)
the performance went from 2fps to 8fps. The performance increase depends
on the number of rows of keyframes that is shown in for example the
timeline editor.
Each row will be using a different thread. Currently the bottleneck is
the summary channel that we could split up in the future even more (
although that is a complex refactoring work).
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D12198
This patch adds new Perlin noise functions to BLI. The noises are compatible
with the shading texture noises in EEVEE, SVM, and OSL.
The existing Jenkins hash functions couldn't be used because they are not
compatible with the shading implementations and an attempt at adjusting the
implementation will break compatibility in various areas of Blender. So the
simplest approach is to reimplement the relevant hashing functions inside the
noise module itself.
Additionally, this patch also adds a minimal float4 structure to use in the
interface of the noise functions.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D12443
Change data structure of keylists. Reducing the balancing overhead and therefore increases performance.
| **Function** | **Master** | **Patch** |
|`draw_summary_channel`| 0.202105s| 0.083874s |
When adding items to the keylist it will store it in a linked list. This linked list is
accompanied with the length (key_len) and a `last_accessed_column`. last_accessed_column is a cursor
that improve the performance when adding new items as they are mostly ordered by frame numbers.
last_accessed_column is reset when a new fcurve/mask/... is added to the keylist.
Before searching or array access. the listbase needs to be converted to an array.
`ED_keylist_prepare_for_direct_access`. After that the caller can use
`ED_keylist_find_*` or `ED_keylist_array*` functions.
The internal array can also be accessed via the `ED_keylist_listbase` function.
The items inside the array link to the previous/next item in the list.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D12052
Evaluating the dependency graph potentially executes Python code when
evaluating drivers. In specific situations (see T91046) this could
deadlock Blender entirely. Temporarily releasing the GIL when evaluating
the depsgraph resolves this.
This is an improved version of
rBfc460351170478e712740ae1917a2e24803eba3b, thanks @brecht for the diff!
Manifest task: T91046
Changed doc string for Blender `--addons` command line argument
to explain what it does rather than just describing what it expects.
Reviewed By: Blendify
Ref D12445
Addresses T76082.
Since the DirectX backend does not work for AMD gpus
(wglDXRegisterObjectNV() fails to register the shared OpenGL-DirectX
render buffer, displaying a pink screen to the user), the original
solution was to use SteamVR's OpenGL backend, which, as tested
recently, seems to work without any issues on AMD hardware.
However, the SteamVR OpenGL backend (on Windows) was disabled in
fe492d922d since it resulted in crashes with NVIDIA gpus (and still
crashes, as tested recently), so SteamVR would always use the
AMD-incompatible DirectX backend (on Windows).
This patch restores use of the SteamVR OpenGL backend for non-NVIDIA
(AMD, etc.) gpus while maintaining the DirectX workaround for NVIDIA
gpus. In this way, issues are still resolved on the NVIDIA side but
AMD users can once again use the SteamVR runtime, which may be their
only viable option of using Blender in VR.
Reviewed By: Julian Eisel
Differential Revision: https://developer.blender.org/D12409
VS2019 had a compiler update moving it into the
range that was used to detect VS2022. This patch
updates the detection to the current VS2022
preview compiler version.
Reported by Jesse Y on chat.
With D12436 two File Browser properties were renamed but two references
not changed in space_filebrowser.py
See D12449 for details.
Differential Revision: https://developer.blender.org/D12449
Reviewed by Hans Goudey
It is causing crashes in rendering, when releasing the GIL in render threads
while the main thread is holding it.
Ref T91046
This reverts commit fc46035117.
Preferences / File Browser section made less confusing.
See D12436 for details and comparisons.
Differential Revision: https://developer.blender.org/D12436
Reviewed by Campbell Barton and Julian Eisel
Reuse temporary windows when they share the same single area type, not
because they share the same title.
See D12401 for more details.
Differential Revision: https://developer.blender.org/D12401
Reviewed by Campbell Barton
This commit allows connecting color sockets to the group input and
changing the input values in the modifier. Before there was an error
since this was more complicated to support with the previous IDProperty
UI data storage method.
Differential Revision: https://developer.blender.org/D12437
This adds support for two Varjo specific OpenXR vendor extensions:
1) XR_VARJO_QUAD_VIEWS
2) XR_VARJO_FOVEATED_RENDERING
Together these enable human eye resolution rendering on supported
devices (currently mainly Varjo XR-3 and VR-3).
In addition, there's a detection for Varjo OpenXR runtime.
This has been tested on real Varjo XR-3 hardware and Varjo Simulator
and confirmed to function correctly. Foveation works, and the views are
rendered correctly for all the four views.
Reviewed By: Peter Kim, Julian Eisel
Differential Revision: https://developer.blender.org/D12229
Evaluating the dependency graph potentially executes Python code when
evaluating drivers. In specific situations (see T91046) this could deadlock
Blender entirely. Temporarily releasing the GIL when evaluating the depsgraph
resolves this.
Calling the `BPy_BEGIN_ALLOW_THREADS` macro is relatively safe, as it's
a no-op when the current thread does not have the GIL.
Developed in collaboration with @sergey
Manifest task: T91046
This implements the initial core framework for fields and anonymous
attributes (also see T91274).
The new functionality is hidden behind the "Geometry Nodes Fields"
feature flag. When enabled in the user preferences, the following
new nodes become available: `Position`, `Index`, `Normal`,
`Set Position` and `Attribute Capture`.
Socket inspection has not been updated to work with fields yet.
Besides these changes at the user level, this patch contains the
ground work for:
* building and evaluating fields at run-time (`FN_fields.hh`) and
* creating and accessing anonymous attributes on geometry
(`BKE_anonymous_attribute.h`).
For evaluating fields we use a new so called multi-function procedure
(`FN_multi_function_procedure.hh`). It allows composing multi-functions
in arbitrary ways and supports efficient evaluation as is required by
fields. See `FN_multi_function_procedure.hh` for more details on how
this evaluation mechanism can be used.
A new `AttributeIDRef` has been added which allows handling named
and anonymous attributes in the same way in many places.
Hans and I worked on this patch together.
Differential Revision: https://developer.blender.org/D12414
rB8cc3d2d6f51f introduced option to force make_local code to either copy
or actually make a linked ID local, but logic of boolean options
handling was broken.
This commit simplifies logic here and fixes the issue.
NOTE: Since those new options were not used yet this was a harmless bug.
Mistake in {rB459974896228}.
To use Object Fonts, (vertex) instancing needs to be enabled.
So bring back the instancing panel and improve the instancing choice
(similar to rB6c0c766bcaa0) by just giving the 'Vertex' choice (or
'None') and explain this is only used for Object Fonts on characters.
Was reported in D11348 itself.
Differential Revision: https://developer.blender.org/D12438
Seems like an oversight in {rB86635402d516}?
Stumbled over this while investigating another report, but this line in
its current form does not make sense (was taking derivedFinal - not
derivedDeform - prior so I assume this has to be
BKE_object_get_evaluated_mesh now).
(it is now only used for vertex parenting where this should not be an
issue, but best keep this generic).
Differential Revision: https://developer.blender.org/D12425
View operations that left the cursor over a gizmo were not being updated
because the mouse-move event was added while the view was animated
instead of once the animation had completed.
Mouse-move events were also missing when smooth-view was disabled.
This fixes a glitch with the 3D view navigation gizmo where multiple
clicks on the view aligned axis failed to switch to the opposite side
unless the user moved the cursor between clicks.
Allow blending the imported cache with the modifiers stack above the
MeshCache modifier.
This is particularly useful for instance when dealing with cloth
simulations performed in another software, where some parts of the cloth
are completely pinned (non-simulated, following the armature). Indeed,
this would allow modifying the animation in some areas without having to
rebake the other parts or the cloth, resulting in a much more flexible
workflow.
Reviewed By: #modeling, campbellbarton, mont29
Ref D9898
The panning angle allows a more intuitive panning when the output is
surround sound. It sets the angle on the horizontal plane around the
listener. 0 degrees is to the front, negative values go to the left and
positive ones to the right. +/-180 degrees is directly from the back.
Technical detail: the panning value is linear with the panning angle
with a factor of 90 degrees. For stereo this means that -1 is left and
+1 right, since the speakers are exactly 90 degrees to either side.
Differential Revision: https://developer.blender.org/D12275
* Make "run" command (re-)run all tests, add "update" command to only
run queued and outdated tests equivalent to the old "run" command.
* Support specifying environment variables for revisions, to easily
compare multiple parameter values.
* Better sorting of revisions in graph.
Improve texture painting/uv editing performance when limited scale is active.
Cause of the slow down is that the image editor draws the image in maximum resolution,
but the 3d viewport uses the limited scale. The variation reuses the same GPU texture
and needed to be uploaded/scaled twice to the GPU.
This patch will adds texture slots that can hold the scaled down and the maximum
resolution image. This would allow better cache hits and reuse of existing caches.
Maximum resolution textures are reused for limited scale when they fit to reduce memory
and CPU footprint.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D12388
This patch allows dropping material assets from material slot under the mouse
cursor. Before this change the material slot had to be hand-picked from the
properties panel.
For consistency it is chosen to do this in any shading mode as the tooltip shows
what is exactly going to happen during release.
The feature also works for other object types than Meshes as it uses the drawn surface on the
GPU to detect the material slots. Performance of this patch has been tested with AMD GCN3.0
cards and are very responsive.
Reviewed By: fclem, Severin
Differential Revision: https://developer.blender.org/D12190
Caused by {rB3e4d720ae483}.
Before above commit, this had a different path handling and
RNA_path_from_ID_to_struct() was always used [which kind of took care of
this]. Now this is only used if ptr represents an ID itself, so we are
"loosing" part of the path.
This patch adds the path back on the member_id in
wm_context_member_from_ptr() for everthing related to space_data, so
WM_context_path_resolve_property_full() can construct a full path even
for these.
Maniphest Tasks: T91225
Differential Revision: https://developer.blender.org/D12418
In e6a1d488ab `deselect_all` property was removed from
`sequencer.select` operator but some keymap items were missed, which was
caught by tests by buildbot.
Operator combines more features and it wasn't very transparent which
properties are used in which feature and how they are used.
Features linked_time, side_of_frame and linked_handle are
isolated, logic moved into own function.
deselect_all property was removed as it practically equals to
!extend in all cases.
Functional change: Dragging existing selection will not change active
strip. Previously this could happen if click happened on strip that
wasn't active.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12320
Even if `snap_targets` `SeqCollection` is empty, there can be static
snap points defined, so don't condition snapping on non-zero target
count.
Differential Revision: https://developer.blender.org/D12400
This patch implements the generic slider from
`ed_draw.c` to the `GRAPH_OT_decimate` operator
This draws a useful UI and enables precision mode and stepping
Overshoot is disabled
The status message is moved to the workspace footer
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D9361
Ref: D9361
Caused by {rB5a9a16334c57}
Linking/appending an asset made from a collection containing certain
types of objects lacking bounding boxes (camera, light) would crash.
Add simple bbox check to prevent the crash.
Maniphest Tasks: T91236
Differential Revision: https://developer.blender.org/D12415
This is to be used when calling code already knows whether the 'made
local' linked ID should be copied, or can directly be converted to a
local one.
Currently unused , this is preparation for rewrite of append code.
This patch just changes the mouse cursor to a "stop sign" when dragging
to an unsupported location during Join or Split operations.
See D11396 for details and examples.
Differential Revision: https://developer.blender.org/D11396
Reviewed by Campbell Barton
Previously, the Point Instance node in geometry nodes could only instance
existing objects or collections. The reason was that large parts of Blender
worked under the assumption that objects are the main unit of instancing.
Now we also want to instance geometry within an object, so a slightly larger
refactor was necessary.
This should not affect files that do not use the new kind of instances.
The main change is a redefinition of what "instanced data" is. Now, an
instances is a cow-object + object-data (the geometry). This can be nicely
seen in `struct DupliObject`. This allows the same object to generate
multiple geometries of different types which can be instanced individually.
A nice side effect of this refactor is that having multiple geometry components
is not a special case in the depsgraph object iterator anymore, because those
components are integrated with the `DupliObject` system.
Unfortunately, different systems that work with instances in Blender (e.g.
render engines and exporters) often work under the assumption that objects are
the main unit of instancing. So those have to be updated as well to be able to
handle the new instances. This patch updates Cycles, EEVEE and other viewport
engines. Exporters have not been updated yet. Some minimal (not master-ready)
changes to update the obj and alembic exporters can be found in P2336 and P2335.
Different file formats may want to handle these new instances in different ways.
For users, the only thing that changed is that the Point Instance node now
has a geometry mode.
This also fixes T88454.
Differential Revision: https://developer.blender.org/D11841
Some GPU's have support for compute shaders, but don't support
GLSL 4.3. This resulted in compiler errors and crashes.
This issue could have been solved by supporting older GLSL languages but
that would have been a hassle to get it right. We already have a
fallback in place for GPU's that don't support compute shaders at all.
When rendering the test scene in T79190 which has only emissive surfaces a division by zero occurs. This is a simple patch to remove this.
Reviewed By: brecht
Maniphest Tasks: T79190
Differential Revision: https://developer.blender.org/D11682
This adds an option to use a capture of the entire main window as the
blend file preview thumbnail.
See D10492 for details and examples.
Differential Revision: https://developer.blender.org/D10492
Reviewed by Campbell Barton
Increase effective resolution of blend preview images from 128x128 to
256x256 for versions saved in the file system thumbnail cache.
See D10491 for details and examples.
Differential Revision: https://developer.blender.org/D10491
Reviewed by Campbell Barton
I remember when we originally decided on the Dimensions panel,
one of the reasons we combined time and image size properties in the same panel,
was simply because the 2.49 and previous UIs used fixed-size panels,
so we often put two categories of properties inside a panel, using two columns.
Now that we no longer do this, we could clarify and simplify some panels
by splitting them, such as the Output > Dimensions panel
{F6753690}
Reviewed By: brecht, pablovazquez
Differential Revision: https://developer.blender.org/D4440
The posterize node limits the number of colors per channel.
This is useful to generate masks or to generate stylized images
Both the tiled and full-frame implementation are included in this patch
{F10314012}
Reviewed By: manzanilla, jbakker
Differential Revision: https://developer.blender.org/D12304
Some operations can take a lot of time to execute and
any duplication should be avoided.
This patch implements a compile step that detects
operations with the same type, inputs and parameters that
produce the same result and merge them. Now operations
can generate a hash that represents their output result. They only
need to implement `hash_output_params` and hash any parameter
that affects the output result.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12341
Adds full frame implementation to Map Range, Map Value, Normal and
Normalize nodes. The other nodes in "Vector" sub-menu are submitted
separately.
Part of T88150.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12233
Adds full frame implementation to Anti-Aliasing, Defocus, Denoise,
Despeckle, Dilate/Erode, Directional Blur, Filter, Inpaint and
Vector Blur nodes. The other nodes in "Filter" sub-menu are
submitted separately.
Part of T88150.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12219
Screen area maintenance "Close" function allowed to be scripted.
See D12307 for usage example.
Differential Revision: https://developer.blender.org/D12307
Reviewed by Campbell Barton
Fixes the regression introduces in rB29f3af952725 . The subdivision modifier used to work on two point strokes with simple mode but not with catmul clark. Now it will work with simple mode and in case of catmull clark mode it will still use simple mode on these strokes.
Differential Revision: https://developer.blender.org/D12397
This changes the search for unprocessed faces to only search
from the previously found face. Local testing on 1.5 million
triangle meshes gives a 75x speedup
(of the code affected, which is the first half of the work).
The former code would traverse all faces of a mesh until a face was
found that had not been processed. This ended up being slow mainly
because it had to load face-data to determine the state of the flag.
Secondarily, the way it iterated and marked the mesh, it would end up
traversing all previously processed faces to find and unprocessed one.
The same optimization has been made for edge-group calculation.
Reviewed By: campbellbarton
Ref D12379
Support extracting identifiers RNA paths into fixed size buffer
since the maximum size of the identifier is known all cases.
- Add BLI_str_unescape_ex to support limiting the destination buffer.
- Add BLI_str_quoted_substr to copy values into a fixed size buffer.
Previously I thought I fixed this by reversing the face corner indices
in quads created by the curve to mesh node. But then we fixed a problem
with the transforms used in that node by inverting one of their
components, so the required direction also reversed. This commit
reverts rBcf28398471c84 and reverses the default direction of the
quadrilateral primitive so it's the same as the others.
Tests will be updated.
Allow the UDIM grid to be shown and adjusted when there are images
loaded in UV edit mode. Right now the grid feature disappears once an
image is loaded and many have found this to be confusing.
Based on community and artist feedback, there was support to change this
behavior[1]
This patch does the following:
- Allows the grid to be shown even when images are present
- The max allowable dimensions for the grid has been increased from
10x10 to 10x100 to match the underlying maximum UDIM range that blender
supports
Note: This should not affect other Image editor modes like Paint/Mask or
the Render Result viewer etc. Future work in this area is currently
documented in a dedicated design task[2]
[1] https://devtalk.blender.org/t/the-udim-tile-grid-design-and-feedback-thread/20136
[2] https://developer.blender.org/T90913
Differential Revision: https://developer.blender.org/D11860
- lower to warning (might be debatable, but this is not really
malfunctioning and e.g. constraints/modifiers dont spit out errors if
targets are not specified)
- clarify _what_ of the two actualy does not exist
ref. T91101
Maniphest Tasks: T91101
Differential Revision: https://developer.blender.org/D12389
Clearing the Parent Bone field in relations would result in something
like this:
```
add_relation(Bone Parent) - Could not find op_from
(ComponentKey(OBArmature, BONE))
add_relation(Bone Parent) - Failed, but op_to (ComponentKey(OBEmpty,
TRANSFORM)) was ok
ERROR (bke.object): /source/blender/blenkernel/intern\object.c:3330
ob_parbone: Object Empty with Bone parent: bone doesn't exist
```
Now skip creation of a depsgraph relation if the Parent Bone field is
empty (since this would be invalid anyways).
ref. T91101
Maniphest Tasks: T91101
Differential Revision: https://developer.blender.org/D12389
This patch fixes the issue described in T88411, that the text in frame nodes is only shown, when the node has a label. This has been caused by rB8f04ddbbc626, because `node_draw_frame_label` not only draws the label, but also all the other text. Therefore skipping it, when the label is empty, also skips drawing the other text.
This is fixed by moving the check for the empty label into `node_frame_draw_label`.
**Patch:** Frame nodes show text despite not having a label.
{F10286204, size = full}
**Same setup in master:**
{F10128099, size = full}
**Test file**
{F10128102}
Reviewed By: #user_interface, pablovazquez
Maniphest Tasks: T88411
Differential Revision: https://developer.blender.org/D11315
When joining two strokes in paint mode using the auto merge option, the join was very hard if the thickness was too different.
This patch adds a smooth to the join in order to get better transition.
Also fixed the problem to join existing strokes very far from actual stroke.
Some cleanup and rename of old code is included in order to make code more readable.
Reviewed By: pepeland
Differential Revision: https://developer.blender.org/D12362
- Split rna_path_token in two,
extracting bracket handling into it's own function.
- Only handle escape characters for quoted tokens.
Numbers were copied using BLI_str_unescape which is unnecessary.
- Extract text without without quotes,
use a return argument so the caller can tell if the token was quoted.
This avoids having to strip the tokens quotes afterwards.
Needed for studio sprite-fright frozen branch.
Also do not overwrite branch for git sub-modules when it is defined, and
fallback to `master` branch in case specified branch is not found in a
specific sub-repository.
Adding a mirror modifier in edit-mode crashed.
Freeing meshes that hold a shallow copy happens in multiple places
while calculating modifiers, making it impractical to clear the
edit-mode pointer before freeing the mesh (as done in
BKE_editmesh_free_derived_caches).
Add a struct member to the edit-mesh struct so evaluated copies
don't free the edit-mesh contents.
No longer free the edit-mesh pointer while in edit-mode since this
isn't reliable to keep the object in edit-mode while freeing it's
edit-mesh data.
Users who want to exit edit-mode should do so explicitly.
Caused by 6d2f9b1dfa.
Freeing the edit-mesh pointer wasn't free the edit-mesh data it's self.
Unlinking from the outliner or through the Python API leaked memory.
This didn't often cause leaks in practice since ED_editors_exit
exits edit-mode for all objects.
Now freeing mesh data frees the edit-mode data as well,
this matches the behavior of other object types that support edit-mode.
The new API introduced in rB1e69a25043120c provides a shorted, more
flexibly way to declare node socket inputs and outputs. This commit
updates all geometry nodes to use the `NodeSocketBuilder` API, except
the four nodes that need `SOCK_HIDE_VALUE` or `SOCK_MULTI_INPUT`.
Differential Revisions: D12377, D12376, D12374, D12373, D12372
Failure to calculate normals caused an assertion since face
tessellation was being calculated with invalid normals.
In practice the rip-drag action would recalculate normals anyway,
however mesh tessellation should always be performed with valid normals.
This commit fixes the custom property edit operator for the the case of
editing group properties. Currently this isn't supported very well, the
data is converted to a string, but the operator shouldn't fail anyway.
This allows editing properties created like this:
C.object['abuse'] = {'parent' : ['child1', 'child2']}
These changes reflect some issues with the design of the operator.
Requiring guessing the type of the data does not work well at all, and
makes code more complicated. In the future this operator can be updated
to use a type drop-down.
Differential Revision: https://developer.blender.org/D12364
Since recently it's possible to query the active file (as object, not
just the name), but it's quite useful for scripting to have access to
all selected files.
This introduces `bpy.context.selected_files`, returning a list of file
objects representing files in the File Browser.
There were requests to be able to track the file selection in the File
Browser. Just using the file name for that wouldn't if the file browser
has the recursive display enabled. File names could be duplicated then.
So expose the entire path relative to the currently displayed directory.
Use BLI_str_quoted_substr_range instead of in-line
quote extraction to resolve:
- Bone names containing quotes caused flip to fail.
- Missing NULL check if a matching quote could not be found.
This is a similar funciton to BLI_str_quoted_substrN
that extracts the range of the quoted string
instead of allocating a new string un-escaped string.
Assigning a new value to an IDProperty with the Python API would free
the entire contents of the existing property, which unfortunately
happened to include the UI data. The fix is to extract the UI data from
the existing property before freeing its contents. An alternative
would be adding another argument to `IDP_FreePropertyContent_ex`, but
this solution is clearer and doesn't increase complexity elsewhere.
When the same stroke was used as a driver variable, this could make this
stroke already tagged as built in the course of building driver
variables (via `build_gpencil`), but then important stuff from
`build_object_data_geometry_datablock` could be missed later on (because
both of these funtions use `checkIsBuiltAndTag`). Most importantly,
setting up operations such as GEOMETRY_EVAL would be skipped entirely.
`build_object_data_geometry_datablock` seems to cover greasepencil just
fine (does the same as `build_gpencil` and more). Proposed solution is to
remove `build_gpencil` entirely. In `build_id` it would then also call
`build_object_data_geometry_datablock` for `ID_GD` IDs. Now the covered
types that _call_ `build_object_data_geometry_datablock` match exactly
to what is covered _inside_ `build_object_data_geometry_datablock`.
Think this "duplication" of functionality was just overseen in
rB66da2f537ae8 [`build_gpencil` existed long before and said commit made
greasepencil a real object with geometry and such].
thx @JacquesLucke for additional input!
Maniphest Tasks: T88433
Differential Revision: https://developer.blender.org/D12324
All props of annotations are not animatable by design and opacity must be equal.
As the opacity is reused by gpencil objects, a new prop has been created in order to use different props for annotations and GP objects.
Image Editor
When changing to another texture paint slot, the texture displayed in
the viewport changes accordingly (as well as the image displayed
in the Image Editor).
When changing the active texture in the Node Editor though, only the
texture displayed in the viewport changes.
This was mentioned in T88788 and I am not 100% sure this is desired in
all scenarios (or at all), it should be seen in tandem of D11497. This
change makes it so that the Image Editor changes to the image we changed
to in the Node Editor (keeping them in sync).
If this is not desired in all cases, this could be made an option.
ref T88788
ref D11496
ref D11497
Maniphest Tasks: T88788
Differential Revision: https://developer.blender.org/D11498
active paint slot
When changing to another texture paint slot, the texture displayed in
the viewport changes accordingly (as well as the image displayed
in the Image Editor).
When changing the active texture in the Node Editor though, only the
texture displayed in the viewport changes.
This _can_ be confusing because you can end up painting on a texture
that you are not looking at in the viewport (so you dont have any
feedback whatsoever). Not 100% sure this is desired in all scenarios,
but this change makes it so that the active paint slot changes to the
one that uses the texture we chaged to in the Node Editor (keeping them
in sync).
If this is not desired in all cases, this could be made an option.
ref T88788
ref D11496
Maniphest Tasks: T88788
Differential Revision: https://developer.blender.org/D11497
Caused by {rBf3bf87e5887c}.
When using a GPencil Time Offset Modifier, the bGPDlayer>actframe can be
NULL. This can be determined though, but above optimization commit
skipped getting the active frame in this case entirely (with the
intention to only get it if framenumbers did not match).
Now also call BKE_gpencil_layer_frame_get() if actframe is NULL in order
to fetch a valid one if present.
Maniphest Tasks: T91060
Differential Revision: https://developer.blender.org/D12355
Run into it when was re-working tiles in the Cycles X project.
Make sure the storage of highlighted tiles is emptied when the
render is finished or cancelled).
The error is only possible to happen if the engine did not do
something correct, but is still good to deal with such situations
more gracefully.
Resets XR navigation deltas relative to session base pose. Primarily
useful for undoing elevation/scale changes. Will be added to the
default VR actions.
Special 3D-to-2D handling (as invoke/modal_3d is used for) is not
necessary for regular XR operators, so they can use the normal
invoke/modal callbacks.
Steps to reproduce:
- enable Extended Asset Browser
- open a regular File Browser
gives:
"rna_uiItemR: property not found: FileSelectParams.asset_category"
Now do proper poll.
Differential Revision: https://developer.blender.org/D12350
When the object display type was set to wireframe or boundbox the depth
buffer wasn't updated resulting in not visible weightpaint overlay.
Thanks to Demeter Dzadik for mentioning it.
Support axis constraints for the measure tool.
Press X, Y or Z to restrict the dimension to that axis,
it's also possible to toggle between orientations matching transform.
Reviewed By: campbellbarton
Ref D10872
This commit fixes editing the value of a list of strings custom property
with the "Custom Property Edit" operator. This sort of custom property
isn't very well supported in general, but editing the values should
work properly anyway.
Differential Revision: https://developer.blender.org/D12348
Use context members instead of not working well or failing due to:
- Missing "path" functions (in the case of edit-bones).
- Paths containing names (in the case of sequence-strips or pose-bones).
While technically correct it's not useful for shortcuts or
menu items to lookup data by name.
Only append RNA_path_from_ID_to_struct to context attributes if those
paths resolve to ID types.
Also simplify creating RNA paths by adding utility functions:
- WM_context_path_resolve_property_full
- WM_context_path_resolve_full
Part of fix for T90723.
Selection was already accessible but not active.
Add utility functions:
- ANIM_nla_context_track to access the active track,
following the convention of ANIM_nla_context_strip.
- ANIM_nla_context_*_ptr versions of these functions,
needed to for creating context members to access the ID pointer.
Part of fix for T90723.
Math implemented in 929d7597b3 was incorrect, but also inconsistent
with previous behavior.
`SEQ_SPEED_STRETCH` should change length only when right handle is
moved. This is now documented in code.
API function `move_to_meta` should move strips without changing context
data like `MetaStack` that tells UI which meta strip should be
displayed and operated upon.
`SEQ_time_update_sequence` relied on `MetaStack` to update meta strip
content length. Instead of changing function `SEQ_time_update_sequence`,
use function `SEQ_time_update_meta_strip_range` directly. This is
because caller would have to be aware of parent meta strip that needs
update anyway.
This is an alternative to context.scene.sequence_editor.active_strip
which could be verbose, especially with additional None checks.
Part of fix for T90723, extracted from D12297.
Previously, built-in nodes had to implement "socket templates"
(`bNodeSocketTemplate`) to tell Blender which sockets they have.
It was nice that this was declarative, but this approach was way
too rigid and was cumbersome to use in many cases.
This commit starts to move us away from this rigid structure
by letting nodes implement a function that declares the sockets
the node has. Right now this is used as a direct replacement
of the "socket template" approach to keep the refactor smaller.
It's just a bit easier to read and write.
In the future we want to support more complex features like
dynamic numbers of sockets and type inferencing. Those features
will be easier to build on this new approach.
This new approach can live side by side with `bNodeSocketTemplate`
for a while. That makes it easier to update nodes one by one.
Note: In `bNodeSocketTemplate` socket identifiers were made
unique automatically. In this new approach, one has to specify
unique identifiers manually (unless the name is unique already).
Differential Revision: https://developer.blender.org/D12335
Now if the frame does not exist in destination layer, the frame type of merge layer is used.
For existing frames in destination layer, the existing type is not changed.
This node takes a curve geometry input and creates a filled mesh at Z=0
using a constrained Delaunay triangulation algorithm. Because of the
choice of algorithm, the results should be higher quality than the
filling for 2D curve objects.
This commit adds an initial fairly simple version of the node, but more
features may be added in the future, like transferring attributes when
necessary, or an index attribute input to break up the calculations
into smaller chunks to improve performance.
Differential Revision: https://developer.blender.org/D11846
This mesh primitive enhances the Cube mesh primitive and allows the
creation of a cuboid with a configurable size and number of vertices
in all 3 directions. The Cube primitive is now similar to the Grid
primitive except that it works in 3 dimensions.
Previously it was possible to create a cube and scale it arbitrarily
along each axis. You could also subdivide the mesh, but the number of
subdivisions was equal along all axes. This meant that making the basic
frame for something like modular buildings wasn't trivial.
Inspired by tutorials and files for modular building creation.
The cuboid is created as a `Mesh` so that large meshes with millions of
faces are created quickly. Though edge calculation could be faster if
implemented here, edges are calculated using `BKE_mesh_calc_edges`
to reduce complexity, and in hopes that they may be calculated lazily
for `Mesh` in the future like vertex normals.
See the differential revision for more information.
Differential Revision: https://developer.blender.org/D11810
This commit allows setting the number of vertices in either direction
to 1, so that the primitive grid node will create a line instead of a
grid. To avoid confusion the soft limits of the input sockets are not
changed, so this is purely an increase in flexibility for when it is
helpful.
Differential Revision: https://developer.blender.org/D11772
The outer edges created om the circle mesh primitive node
weren't marked with the flags that makes them show in wireframe
mode.
Differential Revision: https://developer.blender.org/D12152
This function was documented to return the length but returned an
error value for WIN32. While this doesn't cause any bugs at the moment,
it could cause problems in the future.
Oversight in 5496d8cd36.
Besides helping to avoid buffer overflow errors this reduces complexity
of BLI_str_utf32_as_utf8 which needed a special loop for the last 6
characters to avoid writing past the buffer bounds.
Also add BLI_str_utf8_from_unicode_len which only returns the length.
This was added in b24712a9ca
but is no longer needed as of efc129bc82.
Further, this wasn't reliable as it could fail on linked library data
which has a different base directory.
Assert when blend file relative paths are passed to BLF
(matching imbuf file loading).
The default float IDProperty min value rB8b9a3b94fc148d19 for when there
is no UI data was FLT_MIN instead of -FLT_MAX, which meant that animated
custom property values couldn't be less than zero unless they had their
UI data values edited previously.
That's a mistake I won't make again! Also change the int minimums from
-INT_MAX to INT_MIN to sanitize the whole situation.
This patch just clamps and rounds node contents and socket locations
so they don't appear to jiggle around when you move them. This issue
happens because node sizing and positioning are in floats while text
content must be pixel-aligned.
See D11684 for more details and comparisons.
Differential Revision: https://developer.blender.org/D11684
Reviewed by Julian Eisel
The overlay was drawn twice on top of each other making it hard to see,
hard to theme, and making it more prominent in the wrong areas (before
frame 0, not even start frame). The comment in the code was also wrong
since it said "frame one" but it was 0.
Checked with the Animation module team that it's better to use start/end
frame range instead of frame 0.
There is a TODO note to de-duplicate this section eventually so I left it there.
This fix is currently done for Grease Pencil and Mask modes, but it should
also be fixed for the regular Dopesheet mode (in line 244 if anyone wants to do it).
The storage of IDProperty UI data (min, max, default value, etc) is
quite complicated. For every property, retrieving a single one of these
values involves three string lookups. First for the "_RNA_UI" group
property, then another for a group with the property's name, then for
the data value name. Not only is this inefficient, it's hard to reason
about, unintuitive, and not at all self-explanatory.
This commit replaces that system with a UI data struct directly in the
IDProperty. If it's not used, the only cost is of a NULL pointer. Beyond
storing the description, name, and RNA subtype, derived structs are used
to store type specific UI data like min and max.
Note that this means that addons using (abusing) the `_RNA_UI` custom
property will have to be changed. A few places in the addons repository
will be changed after this commit with D9919.
**Before**
Before, first the _RNA_UI subgroup is retrieved the _RNA_UI group,
then the subgroup for the original property, then specific UI data
is accessed like any other IDProperty.
```
prop = rna_idprop_ui_prop_get(idproperties_owner, "prop_name", create=True)
prop["min"] = 1.0
```
**After**
After, the `id_properties_ui` function for RNA structs returns a python
object specifically for managing an IDProperty's UI data.
```
ui_data = idproperties_owner.id_properties_ui("prop_name")
ui_data.update(min=1.0)
```
In addition to `update`, there are now other functions:
- `as_dict`: Returns a dictionary of the property's UI data.
- `clear`: Removes the property's UI data.
- `update_from`: Copy UI data between properties,
even if they have different owners.
Differential Revision: https://developer.blender.org/D9697
Reason was that the notifier did not set the NS_VIEW3D_SHADING
subtype, which the VR view listens for for a shading update.
In the case of "toggle xray", a notifier was absent altogether.
Add mode to overwrite strips on overlap instead of resolving overlap.
When overlap is created, 3 things can happen:
- On partial overlap, handles of overlapped strip are moved
- On complete overlap with smaller strip, overlapped strip is split
- On complete overlap with larger strip, overlapped strip is removed
This mode can be enabled in header.
Reviewed By: fsiddi, mano-wii
Differential Revision: https://developer.blender.org/D11805
Caused by {rB1a81d268a19f}.
This caused e.g. ALT-clicking the 'Link' button to not propagate to
other selected objects (same as the 'Copy To Selected' context menu
entry).
If these are not unique across IDs, checks in ui_selectcontext_begin()
or copy_to_selected_button() could fail.
Now offset by ID pointer.
thx @JacquesLucke for clarification on the POINTER_* macros (and why
not to use them)!
Maniphest Tasks: T90907
Differential Revision: https://developer.blender.org/D12321
This reverts 151eed752b. Originally thought it was necessary to
initialize selected/active indices to -1 to prevent out-of-bounds
list access, but this is not needed since null checks are already
performed after obtaining list members via BLI_findlink().
In addition, leaving indices zero-initialized facilitates use of the
Python API, for example when displaying action map information in a
UI list.
Various changes to reduce risk of out of bounds errors in utf8 seeking.
- Remove BLI_str_prev_char_utf8
This function could potentially scan past the beginning of a string.
Use BLI_str_find_prev_char_utf8 instead which takes a limiting
string start argument.
- Swap arguments for BLI_str_find_prev_char_utf8 so the stepping
argument is first and the limiting argument is last.
This matches BLI_str_find_next_char_utf8.
- Change behavior of these functions to return it the start or end
pointers instead of NULL, which complicated use of these functions
to calculate offsets.
Callers that need to check if the limits were reached can compare
the return value with the start/end pointers.
- Return 'const char *' from these functions
so they don't remove const from the input arguments.
Add an option to the mask modifier to use the vertex weights to generate
smooth in between geometry, instead of just deleting non complete faces.
This can be used to make all sorts of smooth dissolve animations
directly with geometry, which are usually hacked together with shaders.
It also allows for implicit function plotting using geometry nodes and
boolean like operations on non manifold geometry with the proximity
modifier.
Reviewed By: campbellbarton
Ref D10979
These buttons were in Meshes but not for Grease Pencil. This patch add them in order to keep consistency.
Reviewed By: HooglyBoogly
Maniphest Tasks: T90973
Differential Revision: https://developer.blender.org/D12328
Change Area Move snapping locations to even 12ths, rather than current
eights and thirds, so snap distances are consistent sizes. Also adds
snapping at minimum and maximum locations.
see D11938 for details and illustrations.
Differential Revision: https://developer.blender.org/D11938
Reviewed by Hans Goudey
Solution similar to the one seen in {rBb94ab93dfb82}.
The idea is to find the window and region under the cursor to use in the
operator.
Reviewed By: brecht
Maniphest Tasks: T90817
Differential Revision: https://developer.blender.org/D12310
Is used for platforms for which we do not have native implementation,
such as MIPS, for example.
It is possible to test locking implementation on local computer by
defining `ATOMIC_FORCE_USE_FALLBACK` in the atomic_ops_unix.h file.
Run full regression suit with the locking implementation on amd64
Linux platform and all tests passed.
Having non-optimal but working implementation for odd-ball platforms
seems to be a better choice than failing the build entirely.
Differential Revision: https://developer.blender.org/D12313
This refactors the feature of binding objects to controllers
and recording auto-keyframes, or "motion capture objects", by
providing a more complete API for managing objects and moving the
implementation out of wm_xr_session.c and into its own file
(wm_xr_mocap.c).
In addition, motion capture objects are now stored as a dynamic array
instead of a fixed array, which was previously hard-coded for
specific devices. Each entry in this dynamic array is uniquely
identified by an Object pointer and is mapped to a VR device via an
OpenXR user path. For example, an object can be bound to the headset
via "/user/head", and the left controller via "/user/hand/left".
Should be no visible change on user side.
Preparing for render parts removal as part of Cycles X project.
Differential Revision: https://developer.blender.org/D12317
Reason was that the WM notifier did not set the NS_VIEW3D_SHADING
subtype, which the VR view listens for for a shading update.
In the case of view3d.toggle_xray(), a notifier was absent
altogether.
I think there are the following issues with {rB5fa6cdb77a98}:
- if we introduce a PROP_UNIT_TIME_ABSOLUTE unit, shouldnt it be visible
to RNA as well?
- seems like a double entry sneaked into that commit?
This is in preparation to use this for render time limit in cycles-x.
ref. T90701
Maniphest Tasks: T90701
Differential Revision: https://developer.blender.org/D12315
The inset tool requires moving the cursor towards the center of the
selection, making it nearly impossible to use the inset tool
when the view was aligned with the vertical handle.
Use custom settings for VIEW3D_GGT_tool_generic_handle_free
to make it draw hollow, as large as the scale tool.
Resolves T87991.
Before, distances from each component were handled in the same loop,
making it more complicated to add support for more component types
in the future (and probably hurting performance by dealing with two
BVH trees at the same time, though I didn't test that).
Now each component is handled in a separate function, so that adding
support for another component type is much simpler.
Remove redundant code for drawing text strings that contain only ASCII.
See D12293 for much more detail.
Differential Revision: https://developer.blender.org/D12293
Reviewed by Campbell Barton
The /Zc:inline flag is by default off in the MSVC
compiler however when you build with msbuild it adds
it to the build flags on its own.
Ninja however does not decide on its own to add
flags you didn't ask for and was building without
this flag.
This change explicitly adds the compiler flag so
msbuild and ninja builds are once more building
with the same build flags leading to smaller .obj
files when building with ninja and lightening the
workload for the linker.
This flag is available starting MSVC 2013 update 2
so does not need to be guarded with version checks.
The code assumed that when a node group is is at the highest
level in the node editor, then it is embedded into another data
block and can't be referenced by other node groups. This is true
for shader and compositor nodes, but not for geometry nodes.
We now use a for_each function with callback to iterate through all sequences in the scene.
This has the benefit that we now only loop over the sequences in the scene once.
Before we would loop over them twice and allocate memory to store temporary data.
The allocation of temporary data lead to unintentional memory leaks if the code used returns to exit out of the iteration loop.
The new for_each callback method doesn't allocate any temporary data and only iterates though all sequences once.
Reviewed By: Richard Antalik, Bastien Montagne
Differential Revision: http://developer.blender.org/D12278
Previously when loading an thumbnails for an asset the whole file was
read. Reason this was done was perhaps a future idea to load
all thumbnails inside a blendfile in a single go. This was never implemented
and currently unneeded disk and cpu cycles was spend with finding out what
preview to load.
This patch adds an early break when the thumbnail that the caller is
interested in has been found. This improves the thumbnail extraction
when looking into large files.
Reviewed By: mont29
Maniphest Tasks: T90908
Differential Revision: https://developer.blender.org/D12312
Enables all currently documented OpenXR controller profile
extensions (Reverb G2, Vive Cosmos, Huawei Controller) in order to
support bindings for more VR hardware.
This is necessary because, if these extensions are not enabled, the
OpenXR runtime will return an error when creating a binding with one
of these profiles.
Does not bring about any changes for users at the moment, since
default controller actions have not yet been exposed to users (will
be addressed with D10944, D10948, and D11271).
Originally mentioned that absolute tracking was disabled, which is
wrong because absolute tracking (skipping application of eye offsets)
is always available, although it may not give the expected result of
persistent tracking origins across sessions if the stage space is
unavailable (hence the need for a warning).
Now, the warning makes no mention of absolute tracking, instead
informing the user that the local space fallback will be used and
that they should define tracking bounds via the XR runtime if they
wish to use the stage space.
Add null check for runtime data since it could already have been
freed via wm_xr_exit() (called on file read) prior to the session
exit callback.
Also, fix potential memory leak by freeing session data in
wm_xr_runtime_data_free() instead of session exit callback.
This fixes two memory leaks related to XR action maps.
1. Freeing of action maps needs to be moved from wm_xr_exit() to
wm_xr_runtime_data_free() since the runtime may have already been
freed when calling wm_xr_exit().
2. Action bindings for action map items were not being freed. This
was mistakenly left out of e844e9e8f3 since the patch needed to be
updated after d3d4be1db3.
This fixes a mistake in the XrActionMaps RNA struct declaration.
Originally, the XrActionMaps struct SDNA was set as wmXrData to get
access to wmXrRuntimeData. However, this doesn't give a valid pointer
and the XrSessionState RNA pointer needs to be passed instead.
Since XrSessionState itself does not have SDNA, it is necessary to
pass the XrSessionState pointer to the XrActionMaps struct functions
(new(), new_from_actionmap(), ...) instead of simply using
RNA_def_struct_sdna().
Having settings such as "extend" saved between executions causes
keymaps that don't include this setting to remember the value
between execution.
No longer store this setting for selection operations & remove
redundant values from the key-maps, see: T90275.
Remove BLI_str_utf8_as_unicode_and_size and
BLI_str_utf8_as_unicode_and_size_safe.
Use BLI_str_utf8_as_unicode_step instead since it takes
a buffer bounds argument to prevent buffer over-reading.
There were multiple utf8 functions which treated
errors slightly differently.
Split BLI_str_utf8_as_unicode_step into two functions.
- BLI_str_utf8_as_unicode_step_or_error returns error value
when decoding fails and doesn't step.
- BLI_str_utf8_as_unicode_step always steps forward at least one
returning the byte value without decoding
(needed to display some latin1 file-paths).
Font drawing uses BLI_str_utf8_as_unicode_step and no longer
check for error values.
Use video format for export instead of image sequence. Settings are same
as defined in h264_in_MP4 preset.
Sound default is AAC with 256kbit bitrate.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D7916
Instead of passing separate booleans for whether to store the locations
and distances, check if the spans are empty. And instead of passing a
separate boolean for whether there is valid tree data, pass a pointer
to the data.
The comment for data_eval mentions that it should contain a mesh for
curve objects, however with geometry nodes, objects can evaluate to
curves as well (though they are only containers for the `CurveEval`.
That is a larger issue, but with the upcoming geometry instancing patch
the situation changes, so this commit does not correct that. I also hope
to remove this code in favor of the new curve to mesh code soon.
Instead, just check the evaluated data type in this case, which prevents
the crash, though it is hacky.
- New operator property to toggle edge panning in the keymap:
This is disabled by default to avoid edge-panning in cases where it
gets distracting, such as adding a new node. Only the explicit
translate operator(s) (GKEY or drag) have this enabled now.
- Restore the initial view rect on edge pan cancel:
The initial view rect is now stored in the edge pan operator data.
When an operator with edge panning is cancelled it can now call the
`UI_view2d_edge_pan_cancel` function to restore the original View2D
rect.
- Less delay in node editor scrolling:
Delay is useful when scrolling through long lists, such as in the
outliner, but makes node scrolling feel sluggish and unresponsive.
The lower scroll speed here makes a faster response the better option.
- Zoom influence feature:
Somewhat slower scrolling in UI-space when zoomed out. With the 0.5
zoom influence factor nodes behave as if zoom factor is halved,
otherwise it gets too fast when zoomed out. Previously scrolling would
always be constant-speed in UI space, now it's half-way between UI
space and node (view) space.
Before this patch attempting to remove a particle modifier programmatically
through Python would fail, because it deleted the modifier associated with
the currently active particle system instead of the one passed as an argument
to `bpy.types.ObjectModifiers.remove()`.
This fix adds an additional argument for the particle system to
`object_remove_particle_system`. This allows to specify which particle system
and its associated modifier shall be removed. In case of
`particle_system_remove_exec` it will remain the currently active particle
system, whereas `object_remove_particle_system` passes the particle system
of the modifier. Hence, the correct modifier will be removed.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D12234
The idea is to only allocate pixel storage only when there is an actual
data to be written to them.
This moves the code forward a better support of high-res rendering when
pixel storage is not allocated until render engine is ready to provide
pixel data.
Is expected to be no functional changes for neither users no external
engines. The only difference is that the motion and depth passes will
be displayed as transparent for until render engine provides any tile
result (at which point the pixels will be allocated and initialized to
infinite depth).
Differential Revision: https://developer.blender.org/D12195
This overlay was intended to identify the active objects in modes
like Sculpt Mode, where you don't have any extra visual indication
of what is the current and target object when switching directly
between them.
After having flash on mode transfer on the transfer mode operator,
the visual information this overlays provides is redundant. It is
still available in case some users want to use it like a way of
focusing on the active object.
Reviewed By: JulienKaspar, JacquesLucke
Differential Revision: https://developer.blender.org/D12303
We need to separate the flag telling duplicate code to not handle
remapping to new IDs etc., from the one telling the code that we are
currently duplicating a 'root' ID (i.e. not a dependency of another
duplicated ID).
This whole duplicate code/logic is still fairly unsatisfying, think it
will need further refactor, or maybe even re-design, at some point...
Add a string length argument to BLI_str_utf8_as_unicode_step to prevent
reading past the buffer bounds or the intended range since some callers
of this function take a string length to operate on part of the string.
Font drawing for example didn't respect the length argument,
potentially causing a buffer over-read with multi-byte characters
that could read past the end of the string.
The following command would read 5 bytes past the end of the input.
`BLF_draw(font_id, (char[]){252}, 1);`
In practice strings are typically null terminated so this didn't crash
reading past buffer bounds.
Nevertheless, this wasn't correct and could cause bugs in the future.
Clamping by the length now has the same behavior as a null byte.
Add test to ensure this is working as intended.
Prior to rBb8ecdbcd964a normals were stored both in
DeviceScene.tri_vnormal and the float3 attributes buffer. However, the
normals in `DeviceScene.tri_vnormal` might have be transformed to world
space if the object's transformation was applied, while the data in the
float3 attributes buffer were not. This caused shading issues in cases
where the objects did have transformation applied, as the math expects
the normals to be in object space.
To fix this, convert the normals to object space if necessary before
applying the normal map.
Reviewed By: brecht
Maniphest Tasks: T90854
Differential Revision: https://developer.blender.org/D12294
Simplify logic of speed effect frame calculation by using discrete math
where possible. Only `SEQ_SPEED_MULTIPLY` mode with animation requires
frame map to be built. Frame map building was simplified by removing
unused branches.
Functional change: Animating strip in negative range will reverse playback.
I assume this was limitation of previous system, where each frame map item
was limited to be within correct frame range. Now frame map can contain
values that point beyond usable range and they are limited by
`seq_speed_effect_target_frame_get`. This way it is possible to control
playback rate in both directions.
Mostly fixes T89120 apart from offset handling.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11939
Prefetch needs to avoid rendering scene strips, because
- Rendering in background needs own dependency graph, which fails to
initialize from evaluated data.
- This locks UI and can make it unresponsive for long time periods.
In T88237 prefetch failed to avoid scene strip, because of effect strip
was attached to scene strip.
Ensure, that no effect that is attached to scene strip either directly
or indirectly would be rendered.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11247
When splitting strips, first they are duplicated and then offsets
adjusted. This can fail on cross transitions, because some strips don't
overlap with split frame.
All strips, that relate to each other must be duplicated to ensure
correct relations after splitting, so solution is to delete non
overlapping strips from left or right side respectively.
Since cross transition don't have to overlap with source strips,
splitting such strips would lead to effect being deleted, which
could cause crash when iterating over strips in python. Therefore
splitting of such strips is now forbidden and will generate error.
Splitting of transition will also generate error solely because such
operation is illogical.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D12121
When all strips are selected and overlap is caused, this causes VSE to
hang in infinite loop, because such situation should never happen.
To prevent infinite loop, ensure, that strip overlap is not tested
against single overlapping strip itself.
Prevent overlap that can not be handled because of issue described above
by moving overlapping strip between channels.
Reviewed By: campbellbarton
Differential Revision: D12209
`CurveMapping.evaluate` function expectes `CurveMapping` to be
initialized, while this wasn't documented.
I don't see any reason for not initializing `CurveMapping` on demand.
Initialization was added in rBf16047c2df1e8be56bf76524f9eb1fa5ecde2176
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12145
Changes the threshold comparison from absolute to relative.
Removes threshold for MLoopCol comparison.
Adds a compare relative threshold function.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D12273
`MeshBufferCache` is a struct representing a list of buffers.
As such, `GPUIndexBuf **tris_per_mat` is out of place as it does not
represent one of the buffers in the list.
In fact this member should be close to `GPUBatch **surface_per_mat` as
they are related.
The code for dependencies between buffer and batch had to be reworked
as it relies on the member's position.
Differential Revision: https://developer.blender.org/D12227
When using a Cryptomatte node and selecting 2 views in Multi-View,
its output values are doubled. When selecting 3 tripled and so on.
This causes incorrect compositing results for all the views.
The node creates an input operation for each rendered cryptomatte
pass. In Multi-View, passes are rendered for each view but compositor
is executed per view and should only create operations for those
corresponding to the current view being executed. Otherwise duplicated
operations add up later in cryptomatte operation.
Reviewed By: jbakker
Maniphest Tasks: T89998
Differential Revision: https://developer.blender.org/D12216
Adds full frame implementation to Channel Key, Chroma Key, Color Key,
Color Spill, Cryptomatte, Difference Key, Distance Key, Keying,
Keying Screen and Luminance Key nodes. The other nodes
in "Matte" sub-menu are submitted separately.
No functional changes.
Part of T88150.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12220
Adds full frame implementation to these nodes operations.
When enabling "extend bounds" node option, tiled implementation
result is slightly different because it's using `TranslateOperation`
with bilinear sampling for centering.
Full frame always uses nearest to don't lose image quality.
It has the disadvantage of causing image jiggling on backdrop
when switching size values as it's not pixel perfect.
This is fixed by rounding to even.
No functional changes.
Part of T88150.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12167
Adds full frame implementation to "Displace", "Crop", "Flip",
"Plane Track Deform", "Corner Pin", "Movie Distortion",
"Lens Distortion" and "Map UV" nodes.
The other nodes in "Distort" sub-menu are implemented
separately in other commits.
No functional changes.
Part of T88150.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12166
Adds full frame implementation to "Rotate", "Transform" and
"Stabilize2D" nodes.
To avoid sampling twice when concatenating scale and rotate
operations, a `TransformOperation` is implemented with all
the functionality.
The nodes have no functional changes.
Part of T88150.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12165
Current sampling methods have off by one issues on full frame:
- Bilinear sampling do not fully sample bottom and left image border,
creating edges.
- Single elem buffers are not sampled at all when they should be
at least on the borders to smooth edges.
- EWA filtering is partially implemented on `ReadBufferOperation`, it
needs to be moved to `MemoryBuffer` on full frame.
In order to not affect tiled implementation, this commit creates
specific sampling methods for full frame needs.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12164
Adds full frame implementation to all nodes in "Converter" sub-menu
except "ID Mask" which is implemented separately.
No functional changes.
Part of T88150.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12095
Solves an error in the principled diffuse BSDF, where it was not correctly
rejecting directions outside the hemisphere.
Differential Revision: https://developer.blender.org/D12283
Authored by Henrik Dick (weasel)
Reviewed By YimingWu (NicksBest), Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12284
selected pass
Caused by {rBebaa3fcedd23}.
Seems this above commit assumed an ImageUser's multi_index is only used
for Multiview/Stereo? This is not the case, multi_index also stores the
index for layer/pass combination.
If we call both BKE_image_multilayer_index and BKE_image_multiview_index
(even though this is not appropriate/needed for multilayer images?), we
might end up overwriting multi_index again.
note: looking at this I was also wondering why we update the ImageUser
in image-buffer-aquiring funnctions [and not from the UI, e.g.
template_image_layers, but that is a whole different story I guess, see
comment in T90772 as well]
note2: this could also use a utility function (this is not the only
place where this is done), this is fo a cleanup commit.
Maniphest Tasks: T90772
Differential Revision: https://developer.blender.org/D12267
This was working differently in 2.79, tried tracking this down and it
seems this was wrong since the 2.8 beginning in {rB7907dfc40018}.
This would not only crash without an active scene camera, but would also
result in different tracks from different camera's constraints could not
be selected.
So select id depends on corresponding camera, remove the dependency on
scene camera completely.
Maniphest Tasks: T90651
Differential Revision: https://developer.blender.org/D12230
Remove `font_kerning_style` from `space_userpref.py` since this is no
longer valid.
See more details in D12276
Differential Revision: https://developer.blender.org/D12276
Reviewed by Campbell Barton
Compressing blendfiles can help save a lot of disk space, but the slowdown
while loading and saving is a major annoyance.
Currently Blender uses Zlib (aka gzip aka Deflate) for compression, but there
are now several more modern algorithms that outperform it in every way.
In this patch, I decided for Zstandard aka Zstd for several reasons:
- It is widely supported, both in other programs and libraries as well as in
general-purpose compression utilities on Unix
- It is extremely flexible - spanning several orders of magnitude of
compression speeds depending on the level setting.
- It is pretty much on the Pareto frontier for all of its configurations
(meaning that no other algorithm is both faster and more efficient).
One downside of course is that older versions of Blender will not be able to
read these files, but one can always just re-save them without compression or
decompress the file manually with an external tool.
The implementation here saves additional metadata into the compressed file in
order to allow for efficient seeking when loading. This is standard-compliant
and will be ignored by other tools that support Zstd.
If the metadata is not present (e.g. because you manually compressed a .blend
file with another tool), Blender will fall back to sequential reading.
Saving is multithreaded to improve performance. Loading is currently not
multithreaded since it's not easy to predict the access patterns of the
loading code when seeking is supported.
In the future, we might want to look into making this more predictable or
disabling seeking for the main .blend file, which would then allow for
multiple background threads that decompress data ahead of time.
The compression level was chosen to get sizes comparable to previous versions
at much higher speeds. In the future, this could be exposed as an option.
Reviewed By: campbellbarton, brecht, mont29
Differential Revision: https://developer.blender.org/D5799
Instead of handling mmap, compression etc. all directly in readfile.c, refactor
the code to use a generic FileReader.
This makes it easier to add new compression methods or similar, and allows to
reuse the logic in other places (e.g. thumbnail reading).
Reviewed By: campbellbarton, brecht, mont29
Differential Revision: https://developer.blender.org/D5799
With the ongoing transition to C++ files, Windows build
breaks often because of designated initializers.
Now we have two compilers to catch the MSVC build error on.
Reviewed By: #platform_macos, brecht, campbellbarton
Differential Revision: https://developer.blender.org/D11940
Optimization of font kerning by only caching kerning values after a
pair is encountered. Also saves unscaled values so they don't have to
be rebuilt between font size changes.
See D12274 for more details and speed comparison.
Differential Revision: https://developer.blender.org/D12274
Reviewed by Campbell Barton
Updates sphinx and the theme to the latest version along with any of their dependencies.
Note that we will be sticking to sphinx 4.1.1 until sphinx 4.2 for the same reasons listed in:
https://developer.blender.org/rBM8334
This adds a setting to enable data caching, and another one to set the
maximum cache size in megabytes.
When caching is enabled we load the data for the entire animation in
memory, as we already do, however, if the data exceeds the memory limit,
render is aborted.
When caching is disabled, we simply load the data for the current frame
in memory.
Ref D10197
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D11163
The multi-function network system was able to compose multiple
multi-functions into a new one and to evaluate that efficiently.
This functionality was heavily used by the particle nodes prototype
a year ago. However, since then we only used multi-functions
without the need to compose them in geometry nodes.
The upcoming "fields" in geometry nodes will need a way to
compose multi-functions again. Unfortunately, the code removed
in this commit was not ideal for this different kind of function
composition. I've been working on an alternative that will be added
separately when it becomes needed.
I've had to update all the function nodes, because their interface
depended on the multi-function network data structure a bit.
The actual multi-function implementations are still the same though.
As subdivision objects are first class citizens in Alembic, to
differentiate them with non-subdivided polygon meshes, the Alembic
Procedural automatically sets up subdivision properties on the generated
Cycles Mesh.
However, for real-time playback subdivision is far too slow, so this
modifies the detection of a MeshSeqCache modifier used to activate the
procedural to allow for a Subsurf modifier right after the cache one. If
present, the procedural will tag the object for subdivision, if absent, the
object will be treated as a regular mesh.
This is a temporary measure for until subdivision surface settings are part
of the Mesh datablock (see T68891).
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D11162
Several pure runtime data in this ID type were not properly cleared by
write/read processes.
Note that the initial undo step (the one leading back to initial read
file state) is still forcing re-load of image, for some reasons.
Common investigation together with Jeroen Bakker (@jbakker), thanks. See
also D12242.
This was partially broken with {rBde9ea94fc6f}.
The `Frame Step` and `Second Step` snapping options were working as if
they were `Nearest Frame` and `Nearest Second` respectively in the
`Dope Sheet` and `NLA` editors.
In the `Graph Editor` the problem was more serious:
"Second Step: ... The keyframe itself moves along as though in snapping
were active at all, while its handles 'stay behind' until it reaches
the next second boundary, at which point the teleport handles to
'catch up'".
The snapping code for these modes was spread across the transform
mode code and `recalcData` of each data type. Therefore, create a
unified snapping code for these options so that all issues are fixed in
one place.
Differetial Revision: https://developer.blender.org/D12241
`td2d->loc`, `td2d->loc2d`, `td->loc` and `td->iloc` were not being
initialized as is done with the other conversion types.
This avoids problems with transform modes becoming incompatible.
This avoids problems with incompatible transform modes that could
result in a crash.
This was not really useful, and added estra useless steps in case and ID
should not actually be written.
Further more, it prevented clearing the usercount on write, which can be
cause a false positive 'chanhged' detection in undo/redo case.
This patch exposes the Cycles Alembic Procedural through the MeshSequenceCache
modifier in order to use and test it from Blender.
To enable it, one has to switch the render feature set to experimental and
activate the Procedural in the modifier. An Alembic Procedural is then
created for each CacheFile from Blender set to use the Procedural, and each
Blender object having a MeshSequenceCache modifier is added to list of objects
of the right procedural.
The procedural's parameters derive from the CacheFile's properties which are
already exposed in the UI through the modifier, although more Cycles specific
options might be added in the future.
As there is currently no cache controls and since we load all the data at the
beginning of the render session, the procedural is only available during
viewport renders at the moment. When an Alembic procedural is rendered, data
from the archive are not read on the Blender side.
If a Cycles render is not active and the CacheFile is set to use the Cycles Procedural,
bounding boxes are used to display the objects in the scene as a signal that the
objects are not processed by Blender anymore. This is standard in other DCCs.
However this does not reduce the memory usage from Blender as the Alembic data
was already loaded either during an import or during a .blend file read.
This is mostly a hack to test the Cycles Alembic procedural until we have a
better Blender side mechanism for letting renderers load their own geometry,
which will be based on import and export settings on Collections (T68933).
Ref T79174, D3089
Reviewed By: brecht, sybren
Maniphest Tasks: T79174
Differential Revision: https://developer.blender.org/D10197
The current behavior of the Alembic importer is to only create a
`MeshSequenceCache` modifier or a `Transform Cache` constraint to imported
objects if they have some animated properties.
Since static objects do not have a cache reader, when reloading files those
objects are not updated. Currently, the only way to properly reload a file
because of this is to reimport it.
This adds an option to the importer to always add a cache reader, even if
there is no animated data, to ensure that all objects coming from Alembic
archive are linked to them and updated properly upon reloads.
Reviewed by: brecht, sybren
Ref D10197.
Simplification of BLF code after removal of kerning modes.
See D12262 for more details.
Differential Revision: https://developer.blender.org/D12262
Reviewed by Campbell Barton
This patch removes the "Kerning Style" option for UI widget font
drawing and uses only the current default of "Fitted", since the other
option of "Unfitted" is just the result of truncation errors.
see D12231 for much more information.
Differential Revision: https://developer.blender.org/D12231
Reviewed by Campbell Barton
The main reason for this is to speed up updates by avoid unnecessary
copies as the Generated coordinates are a copy of the vertices.
Creating this attribute may become optional in the future, with UI
parameters to select which attribute to use from the Alembic archive as
reference.
This modifies the attribute lookup to use object coordinates if no
generated coordinates are found on the geometry.
This is useful to avoid creating and copying this attribute, thus saving
a bit of time and memory.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D12238
Vertex normals are needed for normals maps and therefore are packed and send
to the device alongside the other float3 attributes. However, we already pack
and send vertex normals through `DeviceScene.tri_vnormal`.
This removes the packing of vertex normals from the attributes buffer, and
reuses `tri_vnormal` in the kernel for normals lookup for normal maps, which
reduces memory usage a bit, and speeds up device updates.
This also fixes potential missing normals updates following rB12a06292af86,
since the need for vertex normals for normals maps was overlooked.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D12237
Followup to previous commit, rBfffe219bdb8drBfffe219bdb8d
Again this is only for sake of sane ID/overrides managment for now,
the nodetrees themselves are not overridable from user PoV yet.
This reverts rB6899dbef77cd and makes the pointer explicitely
processable by override & diffing code.
Previous changes & fixes have fixed the 'driver-workaround' case afaict.
Note that this only enables proper generic handling of overrides and
their ID pointers, no node property is actually overridable currently.
Embedded IDs (root nodetrees, master collection, etc.) pointer itself is
not editable, but their content may be overridden.
LibOverride code is supposed to know how to handle those embedded IDs.
This should be a no-change commit for now, but is required to enable
initial basic support of nodetrees in library override.
NOTE: Proper full support of liboverrides in nodes is yet to be designed
(has UX unresolved issues, since we likely do not want to expose/make
overridable ALL settings of ALL nodes).
This code checks whether an ID pointer property of an override does not
match its linked reference when it is expected to do so.
This is a goiod indication that a resync is needed.
Previous code would falsy detect overrides of IDs referencing themselves
as needing a resync, when this is not effectively the case.
Caused by {rBbbb1936411a5}.
When adding strips via the new SEQ_add_XXX_strip functions, the
`Editing->seqbasep` pointer was passed around.
Following in `seq_add_generic_update` this `seqbasep` pointer was used
to ensure a unique name.
But `seqbasep` is the pointer to the current list of seq's being edited
(**which can be limited to the ones within a meta strip**).
We need unique names across all strips though (since these are used for
RNA paths, FCurves as reported), so now use the scene's `Editing-
>seqbase` (**which is the list of the top-most sequences**) instead.
Unfortunately this might have screwed files to a borked state, not sure
if this could easily be fixed...
Maniphest Tasks: T90737
Differential Revision: https://developer.blender.org/D12256
Master multiplied the weight paint on top of the rendered image. This
reduced readability.
This patch removes the multiplication for weight painting and adds a
hint of the geometry below the overlay.
Reviewed By: Mets, pablodp606, campbellbarton
Maniphest Tasks: T73434
Differential Revision: https://developer.blender.org/D12170
Removes the artificial requirement that UDIM tile sets start at 1001.
Blender was already capable of handling sparse tile sets (non-contiguous
tiles) so the restriction around starting at 1001 was unnecessary in
general.
This required fixing a few UDIM-related python bugs around manually
updating the `tile_number` field on images as well. See the differential
for details. No script changes are necessary but they will now work,
correctly, in many more cases.
Differential Revision: https://developer.blender.org/D11859
Lowers tile splitting limit so models with extremely dense mesh
portions could still have reasonable performance while for more
common cases the performance impact should be minimal.
Reviewed By: Sebastian Parborg (zeddb), Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12236
When using wireframe opacity, the paint overlay needs to be drawn
before the wireframes in order to alpha blend correctly.
Sculpt overlays were also affected by this, so this commit refactors
this part of the code in case other overlays needs to be added in
the future.
Reviewed By: Mets
Differential Revision: https://developer.blender.org/D12235
There was an unreported bug that switch direction would not switch the order of the vertex group weights. This caused join to do it wrong as well.
Changed to use `BLI_array_reverse` function here to reverse both the normal points and the weights, therefore simplifying the code.
Differential Revision: https://developer.blender.org/D12251
`frame_current_final()` should be used to access the Scene time after
remapping, which also matches how the particles system handles time.
Reviewed By: brecht
Maniphest Tasks: T77307
Differential Revision: https://developer.blender.org/D12239
Standard attributes are not added to the attributes requests when
shaders only have displacement. This is because nodes are only
considering the case when the surface socket is connected.
To support this, added `Shader.has_surface_link()` which checks for both
cases (`has_surface` and `has_displacement`) and replaces all checks on
`Shader.has_surface`.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D12240
This patch adds the missing ability to keep the vertex groups when converting to a grease pencil object. This is increadible useful to create rigged grease pencil objects which move together with rigged meshes.
Differential Revision: https://developer.blender.org/D12249
Reuse existing enums instead of expanding them since it bloats the binary.
The icons enum for example contains over 900 items and was being
expanded 17 times (once for each function that takes an icon argument).
Similar with the event type enum which contains over 200 items and was
duplicated 7 times.
makesrna.c now matches enum definitions from declarations in
RNA_enum_items.h, using their identifiers when found.
The overall space saving on my system is 776kb
(tested with a stripped release build).
Reviewed By: brecht
Ref D12245
This was not working like elsewhere in both NLA and Graph Editor
(meaning that when snapping was already enabled, {key Ctrl} during
transform did not disable it).
Now use getAnimEdit_SnapMode() for this in NLA and GE as well.
Maniphest Tasks: T87173
Differential Revision: https://developer.blender.org/D12244
When adding a range of tiles, the operator could incorrectly calculate
the end_tile. It would not account for the start_tile itself and the
IMA_UDIM_MAX value was 1 too small. This is most noticeable when
attempting to fill the entire supported range of tiles.
Differential Revision: https://developer.blender.org/D11857
Bug caused by integer overflow in ffmpeg_generic_seek_workaround().
Function max_ii() was used to limit int_64tvalue.
After fixing the issue there was another issue, where near-infinite loop
was caused by requested_pos being very large and stream being cut in a
way, that it was missing keyframe at beginning.
This was fixed by checking if we are reading beyond file content.
Reviewed By: zeddb
Differential Revision: https://developer.blender.org/D11888
Refactor and improve waveform drawing.
Drawing now can use line strips to draw waveforms instead of only
triangle strips. This makes us able to properly visualize thin waveforms
as they would not be visible before. We now also draw the RMS value of
the waveform.
The waveform drawing is now also properly aligned to the screen pixels
to avoid flickering when transforming the strip.
Reviewed By: Richard Antalik
Differential Revision: https://developer.blender.org/D11184
The duration and start time for audio strips were not correctly read in
audaspace.
Some video files have a "lead in" section of audio that plays before the
video starts playing back. Before this patch, we would play this lead in
audio at the same time as the video started and thus the audio would not
be in sync anymore.
Now the lead in audio is cut off and the duration should be correctly
calculated with this in mind.
If the audio starts after the video, the audio strip is shifted to
account for this, but it will also lead to cut off audio which might not
be wanted. However we don't have a simple way to solve this at this
point.
Differential Revision: http://developer.blender.org/D11917
The seek pts was not correctly calculated.
In addition to that we were not seeking in the video pts time base.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11921
The video duration was not read correctly from the video file.
It would use the global duration of the file which does in some cases
not line up with the actual duration of the video stream.
Now we take the video stream duration and start time into account when
calculating the strip duration.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11920
If the add strip operator errored out, we wouldn't free custom data allocated
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11919
Before we didn't encode the audio up until the current frame.
This lead to us not encoding the last video frame of audio.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11918
We didn't flush audio after encoding finished which lead to audio
packets being lost.
In addition to this the audio timestamps were wrong because we
incremented the current audio time before using it.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11916
Removes unnecessary storage of world space transforms for controller
model nodes. Now, only local space transforms are stored and the
world transforms are calculated from these local transforms when
needed.
Replaces the boolean option with enum menus for consistency
with the subdivision modifier (rB66151b5de3ff,rB3d3b6d94e6e).
Adds all UV interpolation options.
Original patch by Eitan. Updated by Himanshi Kalra <calra>.
{F9883204}
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D10417
Add color data type comparison for meshes, adding it as
part of comparing meshes with geometry nodes applied.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D12192
blf_kerning_cache_new was performing many unnecessary hash lookups,
calling blf_glyph_search 32768 times. Use a lookup table to reduce this
to the number of ASCII characters (128 calls).
This addresses reduced visibility of scenes (as displayed in the VR
headset) that can result from the 8-bit color depth format currently
used for XR swapchain images.
By switching to a swapchain format with higher color depth (RGB10_A2,
RGBA16, RGBA16F) for supported runtimes, visibility in VR should be
noticeably improved.
However, current limitations are lack of support for these higher
color depth formats by some XR runtimes, especially for OpenGL.
Also important to note that GPU_offscreen_create() now explicitly
takes in the texture format (eGPUTextureFormat) instead of a
"high_bitdepth" boolean.
Reviewed By: Julian Eisel, Clément Foucault
Differential Revision: http://developer.blender.org/D9842
Updating the transforms, or "animating", supported controller
model parts (trigger, grip, thumbstick, etc.) provides better visual
feedback for the user and adds little overhead due to caching of node
transforms/indices.
This patch turns off the preloading of ascii glyphs and instead caches
each glyph the first time it is actually used.
See D12215 for much more detail.
Differential Revision: https://developer.blender.org/D12215
Reviewed by Campbell Barton
This patch makes some non-functional changes to BLF code. Some size
defines added, comments changed, simplification of macro
BLF_KERNING_VARS.
See D12200 for more details.
Differential Revision: https://developer.blender.org/D12200
Reviewed by Campbell Barton
Some of the enum options in the context menu operations are not
supported for all element types.
`TSE_SEQUENCE`, for example, only supports the `Select` option.
So, populate the enum list dynamically depending on the type.
Also add some calls that were missing for the `TSE_SEQUENCE` type.
(`WM_event_add_notifier` and `ED_undo_push`).
There was already some code for that, but it was broken, and proper
resync was completely missing.
There might still be more resync needed in library linking operators
though.
Add a debug-only check regarding consistency of the cache (mapping from
objects to their bases) for a given ViewLayer.
Issues can happen otherwise when some code does remapping of objects,
and forgets to call `BKE_main_collection_sync_remap()` (which clears
those caches) instead of `BKE_main_collection_sync()`.
channel names
Working with multiple strips keyframes was unneccessarily difficult in
Animation Editors (since some anim channels could not be distinguished).
Namely `Crop` and `Transform` are nested structs (nested under
`Sequence`), so these were just displaying the raw struct name.
Also strip modifiers did not have their strip name in their channel
names. Now include the strip name for these.
before
{F10277439}
after
{F10277441}
Maniphest Tasks: T90595
Differential Revision: https://developer.blender.org/D12193
While trying to get Blender 2.93.x LTS to build fine on all release architectures in Debian, I noticed that the misleading use of "mips" as integer variable caused problems when compiling on mips64el. The patch should fix the issue.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D12194
This reverts commit 41e6509818.
This broke "CubeMaskFirst" test.
Any value even slightly outside the [-1.0..1.0] range
caused the result to be nan, which can happen when calculating
the dot-product between two unit length vectors.
When in NLA tweak mode, the action unlink button in the Dopesheet /
Action Editor should be a mere shortcut to exiting tweak mode [nothing
else].
Instead, it was also clearing the action fully, not returning to the
previous edited action before going into tweak mode.
Now dont "flush" by clearing the action, instead exit tweakmode, clear
the scenes SCE_NLA_EDIT_ON flag (if this isnt done some NLA operators
like pushdown were not immediately available because their poll checked
this flag) and send appropriate notifier to have everything update nicely.
Part of T87681 (Bug 4/5/6).
Maniphest Tasks: T87681
Differential Revision: https://developer.blender.org/D11052
Animation indicators as well as decorators for properties were not
updating correctly in the following cases:
- NLA pushdown (this was reported in T87681)
- NLA enter/exit tweakmode
- Outliner unlinking/setting action
These actions all send a ND_NLA_ACTCHANGE notifier which the Properties
Editor was not listening to [which is now added].
part of T87681.
Maniphest Tasks: T87681
Differential Revision: https://developer.blender.org/D11040
This change reduces the GPU context switches when drawing keyframes.
In the previous situation the keyframe blocks and keyframe keys were
drawn per channel. With this patch first all the keyframe blocks are
drawn for all channels and after that the keyframe keys are collected
for all channels and send to the GPU in a single draw call.
This was left over from when these scripts were loaded as modules,
where their names needed to be compatible with Pythons module naming.
Version patch existing files so text with register enabled
without a `.py` extension wont start executing on startup.
Resolves T89532.
This supported calculating normals for MPoly array which was copied to
an MFace aligned array.
Remove the functions entirely since MFace use is being phased out and
these function isn't used anywhere.
Use BKE_mesh_calc_normals instead of
BKE_mesh_calc_normals_mapping_simple for curve modifier calculation.
This only made sense for derived-mesh which is no longer used.
Remove the 'only_face_normals' argument.
- BKE_mesh_calc_normals_poly for polygon normals.
- BKE_mesh_calc_normals_poly_and_vertex for poly and vertex normals.
Order arguments logically:
- Pair array and length arguments.
- Position normal array arguments (to be filled) last.
Optimize mesh normal calculation.
- Remove the intermediate `lnors_weighted` array, accumulate directly
into the normal array using a spin-lock for thread safety.
- Remove single threaded iteration over loops
(normal calculation is now fully multi-threaded).
- Remove stack array (alloca) for pre-calculating edge-directions.
Summary of Performance Characteristics:
- The largest gains are for single high poly meshes, with isolated
normal-calculation benchmarks of meshes over ~1.5 million showing
2x+ speedup, ~25 million polygons are ~2.85x faster.
- Single lower poly meshes (250k polys) can be ~2x slower.
Since these meshes aren't normally a bottleneck,
and this problem isn't noticeable on large scenes,
we considered the performance trade-off reasonable.
- The performance difference reduces with larger scenes,
tests with production files from "Sprite Fight" showing
the same or slightly better overall performance.
NOTE: tested on a AMD Ryzen TR 3970X 32-Core.
For more details & benchmarking scripts, see the patch description.
Reviewed By: mont29
Ref D11993
When calculating controller model component transforms from glTF node
data, it was previously wrongly assumed that the glTF nodes would
always contain transform matrix values. However, nodes can instead
store their transforms as separate translation/rotation/scale values,
in which case the transform matrix needs to be explicitly calculated.
This was the case for the Reverb G2 controller models using the
Windows Mixed Reality runtime.
Special thanks to Werner Trunk for help with testing/debugging.
Originally mentioned that absolute tracking was disabled, which is
wrong because absolute tracking (skipping application of eye offsets)
is always available, although it may not give the expected result of
persistent tracking origins across sessions if the stage space is
unavailable (hence the need for a warning).
Now, the warning makes no mention of absolute tracking, instead
informing the user that the local space fallback will be used and
that they should define tracking bounds via the XR runtime if they
wish to use the stage space.
The poll for unlinking calls `nla_panel_context` without providing an
adt pointer, and there is a check for this pointer in
`nla_panel_context` leading to never returning true if it is not
provided. (this is fine if there are tracks already, poll would succeed
in this case, `nla_panel_context` goes a different code path then)
Same call to `nla_panel_context` is also done in the beginning of the
corresponding unlink exec function (but this time providing the pointer
because it is used later), so it makes sense to do the same thing in the
poll function. Equal check is also done in the panel poll function, so
now these are all in sync.
Part of T87681.
Maniphest Tasks: T87681
Differential Revision: https://developer.blender.org/D11041
Was reported for a file which does not have an active track set in
AnimData even though it was in strip twek mode (but this was accessed in
is_nlatrack_evaluatable()).
Root cause for this is not totally clear, but I assume the situation is
described as part T87681 (and is fixed in D11052).
This patch here just prevents the crash for files that are already in the
borked state.
Reviewers: sybren
Maniphest Tasks: T89805
Differential Revision: https://developer.blender.org/D12085
Clearing the parent from the UI using the X (or from python) clears the
`parsubstr` and set `partype` back to `PAROBJECT`.
Using the Clear Parent operator would leave the `parsubstr` (and thus
`parent_bone`) untouched even though this operator claims to "clear
parenting relationship completely" (it also removes parent deform
modifiers for example).
So now, also clear `parsubstr` and set back to `PAROBJECT` [which is
default].
Maniphest Tasks: T88498
Differential Revision: https://developer.blender.org/D11503
Add Apply Constraint, Duplicate Constraint, and Copy To Selected
operators, and include them in a menu similar to the menu for modifiers.
The shortcuts in the extras menu are also matched to modifiers.
All the here added operators are intended to work exactly like the
analogous ones for modifiers. That means the apply operator should apply
a constraint as if it was first in the list, just like modifiers do. I
have added the same warning message as for modifiers when that happens.
The decision to use this approach of appling the constraint as if it was
first, was made for consistency with modifiers. People are already used
to how it works there. Is also provides more intricate control over the
applied transforms, then just applying all constraints up to that one.
Apply all constraints is already kinda implemented in Bake Animation.
Reviewed By: HooglyBoogly, sybren, #user_interface
Differential Revision: https://developer.blender.org/D10914
During the processing of a continuous drag event, other mouse move
events may be in the queue waiting to be processed.
But when a mouse wrapping happens, these waiting mouse move events
become out of date as they report a mouse position prior to wrapping.
The current code ignores these events by comparing their `timestamp` to
the time recorded in the last mouse wrapping.
The bug happens because the computed value in
`mach_absolute_time() * 1e-9` for some reason is incompatible with the
value of `[event timestamp]`.
Since macOS 10.6, we have a new way to get the amount of time the
system has been awake. `[[NSProcessInfo processInfo] systemUptime]`.
Using this updated method fixed the problem.
Differential Revision: https://developer.blender.org/D12202
Clearing the window was done in wm_file_read_post which was deferred.
This was needed as it left the context in an invalid state
where the window was set but the screen wasn't.
Crashing when setting up keymaps that attempted to access the
scene from the window in the property update function.
Regression in 497bc4d199
Add RNA_struct_type_find_property_no_base for use in the rare situations
when this isn't desired.
Resolves T90617, where sequence strip sub-types weren't detecting
properties that exist in the base "Sequence" types.
- Remove old comment for editors with weak syntax highlighting.
- Remove disabled code to initialize Blender with a file path.
- Remove file name references to function names since these
were outdated, modern development environments can look up this info.
Resolve order of initialization error reading startup file,
support postponing running wm_file_read_post until Blender
has been initialized.
Deferring updates allows duplicate initialization
to be removed from WM_init.
Reviewed By: mont29
Ref D12184
Makesdna fails to detect issues in 32 bit code that can
only be resolved by adding a padding pointer.
We never noticed since we ourselves no longer build for
32 bit, but debian's 32 bit builds got bitten by this
A rather extensive explanation on why this is alignment
requirement is there can be found in this comment:
https://developer.blender.org/D9389#233034
Differential Revision: https://developer.blender.org/D12188
Reviewed by: sergey, campbellbarton
Some of the dna structs were not properly
aligned for 32 bit builds causing issues
for some of the 32 platforms Debian builds
for.
Reviewed By: sergey, brecht
Differential Revision: https://developer.blender.org/D9389
The loading of a font size or style renders bitmaps of the characters
0-255 and stores them in a cache. But glyphs 128-255 in this cache are
not accessible. What used to be ansi high-bit characters are now multi-
byte UTF-8 sequences.
Therefore this patch reduces the glyph_ascii_table size to 128 and
only caches characters 32-127, the visible portion of ASCII, which
greatly reduces the time to load a font.
See D12189 for more details.
Differential Revision: https://developer.blender.org/D12189
Reviewed by Campbell Barton
Before this commit rendering material icons the floor will is hidden.
This reduces the readability of reflective/refractive materials.
check patch for additional screenshots and notes.
This patch will switch the floor material that uses ray visibility tricks to render a floor for reflective rays.
Eevee uses screen space reflections that makes this a different problem. There is nothing else drawn in
the scene in screen space so we need a different trick. Using math we convert a reflective ray to UV space
and generate a world that projects a checker pattern to infinity.
As now the floor is in the world it is being reflected via
a cubemap. As the film is transparent the background (including the floor isn't rendered)
In the future when Eevee supports vulkan raytracing we can re-evaluate and perhaps remove this
approximation.
We tried lightprobes but that wasn't able to do the trick.
Using the compositor would lead to more memory usage (render layers and intermediate buffers) and slower performance.
Solution has been validated with Simon
Reviewed By: sybren, Severin
Differential Revision: https://developer.blender.org/D11988
To improve the presentation of nodes in the node editor. Recognize the
following metadata from the OSL specification:
* [[ string label = "UI Label" ]]
* [[ string widget = "checkBox" ]]
* [[ string widget = "boolean" ]]
Ref T89741
Differential Revision: https://developer.blender.org/D12074
Idea for 3.0 is to disable all functionality that isn't well polished
and focus on those parts first. Starting with poses.
* Adds a new experimental option "Extended Asset Browser", replacing
"Asset Browser".
* Unlike the previous option, this isn't enabled by default anymore.
This didn't work well in practice and caused plenty of confusion.
* "Mark as Asset" and "Clear Asset" are hidden if the option is
disabled.
* Same for the category selection in the Asset Browser.
* Always show display the "Only Assets" option in the File Browser while
browing inside .blend files. That way you can hide data-blocks that
are not pose assets.
* The Asset Library setup UI in the Preferences is always visible now,
it's needed for pose library access.
Addresses T90181, T90180 and T90300.
Differential Revision: https://developer.blender.org/D12120
ID data-blocks that could be accessed from Python and weren't freed
using BKE_id_free_ex did not release the Python reference count.
Add BKE_libblock_free_data_py function to clear the Python reference
in this case.
Add asserts to ensure no Python reference is held in situations
when ID's are copied for internal use (not exposed through the RNA API),
to ensure these kinds of leaks don't go by unnoticed again.
Using high quality normals for vertex offset when set
for higher precision offsets.
This was only used for calculating even-offset.
Reviewed By: campbellbarton
Ref D12176
This is a slight refactoring of the Win32 IME code to remove the use of
Language IDs, which is now strongly deprecated. Instead this uses the
new recommended Locale Names, ie ISO-639-1 2-letter abbreviated names
like "en" for English rather than ID 0x09.
See D12143 for more details.
Differential Revision: https://developer.blender.org/D12143
Reviewed by Ray Molenkamp
bounding boxes
These are namely 'LIGHT', 'CAMERA', 'EMPTY', 'SPEAKER' and 'LIGHTPROBE'.
Note that Empties are included here despite the fact that they have
instancing capabilities ('Display As' can be 'Bounds' for example which
then displays all instanced geometry with boundingboxes -- this however
is not meant to work with the 'Bounds' checkbox and the display bounds
type, these are only affective for the object itself, not its instances)
Issue came up in T88443.
Maniphest Tasks: T88443
Differential Revision: https://developer.blender.org/D11344
Adds full frame implementation to "Composite", "File Output" and
"Split Viewer" nodes.
The other nodes in "Output" submenu are implemented separately.
No functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12091
Adds full frame implementation to "Alpha Over",
"Hue Saturation Value", "Invert", "Tonemap" and "ZCombine" nodes.
The other nodes in "Color" submenu are implemented separately.
No functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12092
It was only affecting tiled fallback on full frame mode. If tiles from a
constant operation were multi-thread initialized, its buffer
was inflated multiple times.
Adds full frame implementation to "Bokeh Image" node, "Track Position"
node, `SetVectorOperation` and `MovieClipAttribute`.
The other nodes in "Input" submenu are implemented separately.
`MovieClipAttribute` needs resolution to calculate its constant value, it can't be constant folded,
which requires it to be a `ConstantOperation`. Now `ConstantOperation` contemplate this case
and any operation that is always constant without depending on inputs should implement it.
If in the future an operation needs to get an input constant element during
`determineResolution` it must first determine its input resolution.
The nodes have no functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12090
Adds full frame implementation to this node operations.
No functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11751
Adds full frame implementation to this node operation.
No functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11634
Adds full frame implementation to this node operation.
No functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11694
Empties can only instance a collection, instancing on "Vertices" or
"Faces" does not make sense for empties, make that clear in the UI.
ref D11348
Maniphest Tasks: T88443
Differential Revision: https://developer.blender.org/D11349
Basically, only meshes, empties and pointclouds support direct
instancing atm., no need to have the panel for other types.
note: prior to rB2eca054e14b1, collection instancing was possible on all
types (but that was removed in said commit)
note2: for empties, rna_Object_instance_type_itemf should also be
tweaked so we dont get "Vertices" and "Faces" options, but that can be
done in a separate commit
Maniphest Tasks: T88443
Differential Revision: https://developer.blender.org/D11348
Added the comparison of non-generic attributes with generic
attributes in the same loop to avoid issues with different
order in layer->types of the two meshes.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D12149
Caused by {rB37570a73170e}.
Above commit wasnt taking into account that at this point the link could
still be NULL.
Maniphest Tasks: T90564
Differential Revision: https://developer.blender.org/D12180
Right clicking would spawn the context menu under the cursor, but some
operators would actually act on the active asset/file which wasn't
the one clicked on.
When multiple files are selected and one of them is right-clicked on,
selection is not changed to allow operations on multiple files. E.g.
deletion.
This makes the File/Asset Browser match the Outliner (in behavior, not
implementation).
For the right-click selection keymap:
* The context menu still only spawns on W.
* Bonus: Right click now does something, it actually selects files!
I could have done additional changes here to avoid this, but it seems
like a good addition.
This is also a better alternative to rB5edfde58fe60, which didn't work
properly either. Using rename from the context menu would only work if
the clicked on file was also active...
Differential Revision: https://developer.blender.org/D12065
Reviewed by: Campbell Barton
When blender starts and the mouse is over a file/asset browser it
crashes. This is because blender wants to highlight a file, but the
layout isn't initialized yet.
Blender forbids property changes in .draw() methods. But they weren't
caught after a call to .template_list() with a custom list type.
Support nested calls that disallow writes.
Caused by {rBe3faef686d38}.
Error was getting the preview [which wasnt there yet]
These only appeared once the material tab in the Properties Editor was
used (since this ensured a valid preview icon).
Above commit changed behavior for RNA icon getter (this does not create
data anymore), so ensure the preview by hand here.
Maniphest Tasks: T89284
Differential Revision: https://developer.blender.org/D12178
This was really missing there (some COW tags behavior was also
documented in some code using them, like in `sound.c`, but not in their
definition).
Ref. T88555.
Change the dylib folder relative to `Blender` executable to be
the same as before rB652fbc200500497a67bd11d18b786587ba34e3d9 and same
as bpy.so : `@loader_path/../Resources/${BLENDER_VERSION}/lib`
The crash occurred calling because mesh_get_eval_final in edit-mode
freed all derived mesh data without tagging the object for updating.
However meshes in edit-mode weren't meant to be used as knife-project
source-data, adding support for multi object edit-mode caused this.
This makes texture sockets have a label by default. This can be changed
by adding the SOCK_HIDE_LABEL flag to the socket. With this change the
switch node now shows the labels "True" and "False" like for the other
types of sockets.
To be consistent with the image editors and 3D viewport
the cursor location can be changed from the sidebar.
This was missing from the clip editor, but support has been added in this commit.
Previously, the only way to precisely set the cursor was
to call the set cursor operator then use the redo panel to adjust the value.
To be consistent with all other editors the annotation
layers pannel should be placed in a "View Tab".
In my next commit, this tab will be expanded to include other options.
The 2D cursor should be visible in both mask and uv edit modes.
This was likely and oversight when splitting the image editor
into the UV and Image editors
* Revert back to OpenMP 9.0.1 due to bug causing cloth physics test to fail.
* Skip flex build on macOS to avoid link error, only reason we build this is
due to old flex version on Linux CentOS 7.
* Fix PNG cmake argument that expects lowercase on instead of ON.
Ref T90507, T88438
Pass `FileListReadJob` to the `read_job_fn` callback, instead of exploding
the struct into its individual fields, passing those as parameters, and
marking a bunch of those as unused again.
No functional changes.
Caused by fix for T90256 and a misunderstanding in D11928.
Don't skip tagging edges when the auto-smooth angle is 180 degrees
since this skips topology checks which are needed for properly
calculating edge loop normals.
Caused by 4f64fa4f86.
Was a bad backport from the Cycles X branch: the fact that CPU and GPU
has different reset code paths was not taken into account.
`bpy.ops.font.text_insert(text="multiple characters")` wasn't working.
When the text is selected does not correctly insert multiple characters.
- When the text was selected from left to right,
the cursor only move one position next to the selected text.
- When the text is selected from right to left,
a part of the selected text remain.
Ref D12161
- Remove check for screens being None as this would raise an error.
- Replace loop over `area.spaces` with `area.spaces.active`.
- Loop over grease pencil data directly instead of accessing
through the scenes objects.
- Split versioning into functions.
- Use `update_factory_startup_*` prefix for function names
as this isn't versioning existing files.
This commit makes the display options for mask only show in the header for the clip and image editors.
Prior to this change they would display in the header for the clip editor and in the sidebar for the image editors.
This commit does two things, first it removes the proportional editing tool settings.
This is not accessible code and is has not been used since the grease pencil/annotations changes in 2.8.
Second, this patch reorders the if statements so that the display options are always shown on the rightside.
Reviewed By: antoniov
Differential Revision: https://developer.blender.org/D12163
This seems to be really old code from 2.4 or earlier.
I was unable to find when it was removed gitk and git blame both couldnt find anything.
However, it is safe to say that this code is long gone.
- Remove unused wmSurface.is_xr member
- Rename "actionmap" to "action_set" in wmXrActionData
- Use BLI_findstring()
- Add modifications note to tinygltf readme
Removes special queueing of events to the XR surface, which was
originally done to bypass filtering by mouse region when
invoking/executing XR operators.
Now, finding an appropriate region for XR events will simply be done in
the regular window event handling by checking the event type and
skipping mouse-specific processing.
Fix poll_message_set API documentation to consistent with Python style
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D12150
This adds support to compile the html python api docs from the command line by running `make doc_py` matching support between windows and unix.
This patch also makes it so the compiler is not needed if you set the `blender_bin` variable, this affects icon generation as well.
In the future, I want to move away from generating the build output in the build directory but that can come in a later change.
Reviewed By: LazyDodo
Differential Revision: https://developer.blender.org/D12144
This is a backport of recent development in the Cycles X branch.
Fixes possible dead-lock in viewport rendering when exiting at an
exact bad moment (couldn't reproduce in master branch, but in the
cycles-x branch it was happening every now and then).
Differential Revision: https://developer.blender.org/D12154
Makes it consistent with the guidelines and the Cycles X branch, and
allows to backport fix for the viewport update from the branch. Will
cause a merge conflict, which should be simple accept-ours in the
branch.
The library has some modifications and it has been included in a diff.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12142
(Some minor changes done in the patch)
In the `FileList` struct, rename the `AssetLibraryReference
*asset_library` field to `asset_library_ref` -- it's a description of
which asset library is used, and not the asset library itself.
This is to make space for a future `AssetLibrary *asset_library` field,
which will point to an actual asset library struct/class.
No functional changes.
Reviewed by: Severin
Differential Revision: https://developer.blender.org/D12151
This corrects code that's currently disabled, see `USE_NURBS` define.
The name passed to `BKE_curve_add` was overwritten,
bypassing uniqueness and utf8 encoding checks.
Longer names would cause a buffer overrun as the length of the source
data was passed to `BLI_strncpy` instead of the destination.
Reviewed By: sybren
Ref D12125
This caused Cycles texture_space_mesh_modifier and panorama_dicing tests to
randomly fail.
The issue was introduced with D11377, due to a missing dependency. Now ensure
we first copy the texture space parameters, and only then use or recompute then.
In general it seems like this dependency should have already been there, since
parameter evaluation includes animation and drivers, and geometry evaluation
may depend on that (even if you would not typically animate e.g. an autosmooth
angle).
Thanks Campbell for tracking this one down.
Although the relevant structs (wmXrRuntime/XrActionMap/
XrActionMapItem) are zero-allocated, the selected and active action
map indices need to be initialized to -1 to prevent potential
out-of-bounds list access.
Just like the "Select by Material" node, this node outputs a
boolean attribute for control points that have a matching handle
type. By default left and right handles are considered, but it's
possible to only check one side with the toggle in the node.
Differential Revision: https://developer.blender.org/D12135
Some mesh primitives created using geometry nodes use loops to create
vertices and accumulates positions/angles in FP variables. This allows
rounding errors to accumulate and can introduce significant errors.
To minimize changes from original implementation, variables allowing
errors to accumulate are replaced by: delta * index. Affected Mesh
Primitives nodes are Line, Grid, Cylinder, Circle, Cone, and UV-Sphere.
Differential Revision: https://developer.blender.org/D12136
Assigning a mesh seems to do its own parameter copying, which
means we need to manual copy its vertex groups here, which was
just overlooked in rB3b6ee8cee708.
Differential Revision: https://developer.blender.org/D12110
Generic attributes CD_PROP_* comparison is added in customdata_compare
Checks for built-in as well as user created attributes.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D12137
The Xcode IDE can also benefit from the options:
- WINDOWS_USE_VISUAL_STUDIO_SOURCE_FOLDERS
- WINDOWS_USE_VISUAL_STUDIO_PROJECT_FOLDERS
So add suport to these options and also renames them as they are no
longer limited to just Windows and Visual Studio.
Reviewed By: brecht, ankitm
Differential Revision: https://developer.blender.org/D12132
Practice shows that when combining actions and direct animation
it is usually best to combine location, rotation and scale
separately, which is implemented by the Split Channels modes
recently introduced in D9469 for Copy Transforms. This completes
the same set of 6 choices for the Action Constraint.
The default for new constraints is changed to the newly
added Before Original (Split Channels) mode.
The original patch is motivated by Loic Pinsard, who created
an addon that does the equivalent of this feature by splitting
the action into two, separating location and rotation+scale.
Differential Revision: https://developer.blender.org/D7547
The exception to automatically pin vertices of grid corners also
has to take into account that the vertex is in a boundary.
Reviewed By: JacquesLucke
Maniphest Tasks: T90235
Differential Revision: https://developer.blender.org/D12044
The active geometry element are usually updated by the cursor drawing
code (as they are needed for the cursor preview) and when an sculpt
operator starts. For brushes, this was not happening. This was making
brushes rely by default on the last cursor drawing update, which can
be incorrect if the mouse moved after starting the stroke without
hovering the active geometry.
Reviewed By: JacquesLucke
Maniphest Tasks: T90236
Differential Revision: https://developer.blender.org/D12045
Add warning(info) to nodes that don't work when an input value is
out of range. For example, the grid node doesn't work with Vertices X
or Verices Y less than 2.
These are purposefully added as "Info" warnings, because they don't
show in the modifier and they aren't printed to the terminal.
Differential Revision: https://developer.blender.org/D11923
The immediate reason for this is that we want to be able to initialize them
to different defaults for light objects, which is hard with Python properties.
But in general it is useful to be able to share these with other renderers.
As a side effect, Eevee now supports a per-object holdout instead of only
per-collection.
Differential Revision: https://developer.blender.org/D12133
Code freeing the array would not properly reset its length value to
zero.
Note that this corrupted data could also be saved in .blend files, so
had to bump fileversion and add some doversion code too.
Fix T90166: crash when creating a liboverride.
This was apparently done in two places only, with a very cryptic comment
(`/* for raw_access, untested */`), and... I cannot see how returning a
non-zero length value for an array that does not exist or is not
accessible at least, would be anything but an obvious source of issues.
Note that both commits adding those lines are from stone ages (2009):
rBcbc2c1886dee and rB50e3bb7f5f34.
The keymap is available in: Draw, Edit, Sculpt, Weight Paint and Vertex Paint modes.
The keymap is not available in Object mode to avoid any conflict.
Reviewed By: pepeland
Differential Revision: https://developer.blender.org/D12128
This is a simple engine used only to debug the texture of select ids.
It is only used when the `WITH_DRAW_DEBUG` option is enabled and the
debug value is 31.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D5490
Addresses the remaining portions of T77137 (Python API for Controller
Interaction), which was partially completed by D10942.
Adds an XR "action maps" system for loading XR action data from a
Python script. Action maps are accessible via the Python API, and are used
to pass default actions to the VR session during the
xr_session_start_pre() callback.
Since action maps are stored only as runtime data, they will be
cleaned up with the rest of the VR runtime data on file read or exit.
Reviewed By: Julian Eisel, Hans Goudey
Differential Revision: https://developer.blender.org/D10943
This is not supported currently,doing so through RNA API remains
possible, but from regular UI operations it should not be doable
anymore.
Ref. T90459.
LibOverride of scenes is not really supported currently, there are many
issues with it.
Will disable most user-accessible ways to create such overrides in a
following commit.
Provides two key improvements to runtime controller data.
1. Separates controller poses into two components, "grip" and "aim",
which are both required to accurately represent the controllers
without manual offsets.
Following their OpenXR definitions, the grip pose represents the
user's hand when holding the controller, and the aim pose represents
the controller's aiming source.
2. Runtime controller data is now stored as a dynamic array instead
of a fixed array. This makes the API/functionality more adaptable to
different systems.
Does not bring about any changes for users since only internal
runtime functionality is currently affected.
Reviewed By: Julian Eisel
Differential Revision: http://developer.blender.org/D12073
Vertices with no connected faces would attempt to divide by the combined
face area causing a divide by zero.
Use the same weight for wire vertices as vertices connected
to zero area faces.
Protect this accessor with a local static mutex when it needs to
create/write data.
Ideally accessors should never create or modify data, but there are some
cases where this bad behavior is currently unavoidable.
This is the case of the Pointer accessor when the actual IDProperty has
not yet been created.
NOTE: this fixes a memory leak in liboverride diffing process when
several different overrides use a same linked reference ID.
Differential Revision: https://developer.blender.org/D12060
Even though the ID itself remain the same after being made local, from
depsgraph point of view this is a different ID. Hence we need to tag all
of its users for COW update, as well as rebuild depsgraph relationships.
Should be also backported to LTS 2.93 (and 2.83 if possible).
Negative indices that remained negative after adding the sequence length
caused incorrect slicing.
With the default scene for example:
bpy.context.scene.objects[-4:2]
Gave a different result to:
tuple(bpy.context.scene.objects)[-4:2]
Clamp indices above zero so loops that step forward works as intended.
Provides several important improvements to the runtime action
bindings operation and internal API.
Moves input-specific action data (input thresholds, input regions,
pose offsets/spaces) from actions to more granular action bindings.
This allows a single action to be mapped to a variety of inputs,
without having to share a single input threshold, region, or space.
Also removes the need for action space creation API, as spaces for
pose actions will be automatically created with the bindings.
The correct action data for the current inputs is set by calling
xrGetCurrentInteractionProfile() to get the current profile and then
retrieving the corresponding mapped data.
Does not bring about any changes for users since only internal
runtime functionality is currently affected.
Reviewed By: Julian Eisel
Differential Revision: http://developer.blender.org/D12077
This adds support for building the icons from make.bat
unlike bash there is no passing environment variables
on the command line.
The scripts go out of their way to locate both blender
and inkscape however if they are not found, the user is
given a helpful error message telling them how to set
the variables.
Although some extra help can be given there, if your
normal build is a 2019 full build running
`make 2019 full icons`
will help it find the blender executable as well.
finally if you know the name of your build folder
running
`make builddir build_windows_Lite_x64_vc16_Release icons`
will also work, if all fails you can point directly to
the blender executable by running
`set BLENDER_BIN=c:\where\blender\lives\blender.exe`
before running `make icons` or `make icons_geom`
The python scripts needed some small modifications since
without the PATHEXT, SystemRoot and SystemDrive
environment variables python will not initialize properly
on windows. (Not blender related, even mainline python
won't start without those)
GHOST_ImeWin32::SetInputLanguage() has a confusing name because it does
not set the input language. It actually retrieves the current input
locale from the OS and caches the value of the current input language
ID. Therefore this patch renames it to "UpdateInputLanguage"
Differential Revision: https://developer.blender.org/D12134
Reviewed by Ray Molenkamp
This removes one member of GHOST_ImeWin32 that is not used and cannot
be used in the future. It is holding the result of ImmIsIME, which is
whether an input language supports IME. It does not indicate that one
is in use, turned on, composing, in English mode, etc.
see D12131 for more information.
Differential Revision: https://developer.blender.org/D12131
Reviewed by Ray Molenkamp
This makes the internal naming consistent with the public API. And also gives
us a visibility_flag rather than restrictflag that can be extended with more
flags.
This patch makes us less restrictive on the allowed types of FreeType
font character maps we allow, rather than primarily unicode-only. This
allows us to use some legacy, symbol, specialty, and proprietary fonts
like Wingdings. Note we were a little less restrictive with vfonts,
used for 3D Text Objects, so this patch primarily helps VSE.
See D12124 for details and examples.
Differential Revision: https://developer.blender.org/D12124
Reviewed by Brecht Van Lommel
When displaying the names of fonts for 3D Text objects, use the same
format as shown in File Browser: Family name + Style name. They are
currently shown with Postscript Name, which doesn't match well.
see D12069 for more details.
Differential Revision: https://developer.blender.org/D12069
Reviewed by Campbell Barton
The goal: allow to easily use AO approximation in scenes which combines
both small and large scale objects.
The idea: use per-object AO distance which will allow to override world
settings. Instancer object will "propagate" its AO distance to all its
instances unless the instance defines own distance (this allows to
modify AO distance in the shot files, without requiring to modify props
used in the shots.
Available from the new Fats GI Approximation panel in object properties.
Differential Revision: https://developer.blender.org/D12112
This is used to set the default caps type for the stroke. Before always was rounded and only could be changed later in Edit mode
Two new buttons has been added to topbar.
NOTE: New icons are been designed (T90414)
The buttons are expanded to list in Properties panel.
Reviewed By: mendio, HooglyBoogly
Differential Revision: https://developer.blender.org/D11999
rBfb87d236edb7 made the values returned by `projmat_dimensions` more
standardized following the documentations. But the functions in Blender
that called `projmat_dimensions` followed a proposal that these values
corresponded to a distance of 1m of clip.
Adjust these functions to follow the new algorithm.
This patch fixes an issue with missing faces when assigning a material slot other than the first to faces on AMD TAHITI cards. Refer to T78390 and T74024 for a description of this issue.
This patch also incorporates fix from T78390 for KAVERI.
{F9029258}
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D9305
Rename new API function introduced in recent rB3b0fab6dfaa0 to match our
convention to put the action (verb) at the end of names:
`operations_update`.
Sorry for not catching that during review.
Previous check was too blunt, preventing e.g. re-organization of
collection overrides inside a local parent collection, which is
perfectly valid operation.
Reported by @hjalti from the studio, thanks!
Loopcut drawing from gizmo had thicker lines because
it was using line smoothing without alpha blend, compared
to thin jagged lines from operator.
Make the drawing anti aliased and consistent by using
3D_POLYLINE/3D_POINT shaders, and making sure alpha
blending is on.
Reviewed By: #eevee_viewport, fclem
Differential Revision: https://developer.blender.org/D11333
While most modifies don't handle out of memory cases, ocean simulation
could attempt huge allocations: 2048 gb at the maximum resolution.
Resolves T83952.
The update_operations function will update the override structure of the
local object. When working with overrides the override structure is only
updated when the work-file is stored. When using scripts you might want
to enforce the update of override properties and operations.
This function removes a hack on the test cases.
Reviewed By: mont29
Maniphest Tasks: T86656
Differential Revision: https://developer.blender.org/D10848
This patch changes the drop named material tooltip to give feedback to
the user what is going to happen when they invoke the change.
There are 3 states:
* "": Operator will be canceled as not all data is present (dropping on
background.)
* "Drop <named material> on <object name> (slot <slot number>, replacing
<current material in slot>).
* "Drop <named material> on <object name> (slot <slot number).
Reviewed By: Severin
Maniphest Tasks: T90371
Differential Revision: https://developer.blender.org/D12106
This node sets the selected (or all) splines in curve to a chosen target
spline type. Poly, Bezier, and NURB splines can be converted to any of
the other types. This is meant to be a building block node, useful in
many procedural situations.
In the future the node could be optimized with multi-threading, or by
avoiding copying in many cases, either by retrieving the curve for write
access or by passing the raw vectors to the new splines where possible.
With edits from Hans Goudey (@HooglyBoogly)
Differential Revision: https://developer.blender.org/D12013
`r_left`, `r_right`, `r_bottom` and `r_top` were ignoring `clip_near` value
when in perspective view.
Also rename `projmat` to `winmat` in these cases.
For some reasons looks like those shortcuts could get out of sync, which
created weird hard to understand building errors.
So for sake of simplicity and security, just re-create them all the
time, just like we update ld paths.
For Blender.app: dropping libomp.dylib next to Blender executable is
enough for it getting picked up since `@executable_path` is an rpath.
For non-distributed binaries datatoc, makesdna, tests etc, code for
copying libomp.dylib to build folder is removed and replaced by
CMake's rpath option for *build* tree.
For bpy.so, the post build rpath change has also been replaced by CMake
rpath option for *install* tree.
Since -id has been changed in D11748, remove the
`install_name_tool -change ...` command.
Any dylib can just be dropped at `MAC_BLENDER_TARGET_DYLIBS_DIR`
hereafter. Appending dylib path to `CMAKE_BUILD_RPATH` will be needed
for datatoc etc if linked against one (instead of copying the
dylibs around).
Reviewed By: #platform_macos, brecht
Differential Revision: https://developer.blender.org/D11997
While this was already the case for the most part
some selection operators stored common settings for reuse such as
"toggle", "extend" & "deselect".
Disabling storing these settings for later execution
as it means failure to set these options in the key-map re-uses
the value of the shortcut that was last called.
Skip saving these settings since this is a case where reusing them
isn't helpful.
Resolves T90275.
Fix division by zero when `BKE_bone_parent_transform_invert()` inverts a
scale vector with zero components.
Zero values in the to-be-inverted vector are now simply skipped, i.e.
remain zero after inversion. This at least ensures that
`invert_v3_safe(invert_v3_safe(vector))` results in the same vector.
This commit does NOT fix the conceptual problem that an inversion of a
potentially non-invertible vector is relied upon. It just avoids the
division by zero.
When channels are scrolled to be (partially) behind the search bar,
their widget buttons would still be interactive, preventing the seach
buttons to be usable.
We have to make sure the events are consumed from the search and dont
reach other UI blocks.
We can do so by flagging the block `UI_BLOCK_CLIP_EVENTS` -- but also
have to make sure the bounds are calculated correctly (otherwise the
check relating `UI_BLOCK_CLIP_EVENTS` in `ui_but_find_mouse_over_ex` wont
trigger properly.
Maniphest Tasks: T90364
Differential Revision: https://developer.blender.org/D12103
When calculating the particle step in `get_effector_tot`, we have to
round up (otherwise we might get an extra round in the for-loop in
`BKE_effectors_apply` for certain cases).
Example from the report:
- 10.000 particles, Effector Amount 3
- was rounding the step down to 3333
- going into the for-loop for 0, 3333, 6666 and 9999 (4 times)
- now rounding the step up to 3334
- going into the for-loop for 0, 3334 and 6668 (3 times as desired)
Maniphest Tasks: T90346
Differential Revision: https://developer.blender.org/D12113
Extend the 'reading error' container to produce the generic short
message in the popup directly visible by the user, and move all detailed
info the `INFO` reports that only show up in the console and Info
editor.
This is an initial implementation of a USD importer.
This work is comprised of Tangent Animation's open source USD importer,
combined with features @makowalski had implemented.
The design is very similar to the approach taken in the Alembic
importer. The core functionality resides in a collection of "reader"
classes, each of which is responsible for converting an instance of a
USD prim to the corresponding Blender Object representation.
The flow of control for the conversion can be followed in the
`import_startjob()` and `import_endjob()` functions in `usd_capi.cc`.
The `USDStageReader` class is responsible for traversing the USD stage
and instantiating the appropriate readers.
Reviewed By: sybren, HooglyBoogly
Differential Revision: https://developer.blender.org/D10700
The file selection parameters (e.g. `context.space_data.params`) are
expected to be unset in certain cases. Reading 2.4 files seems to be one
of them. Hence, code using it should check it's set first. Also added an
assert to a File Browser UI template printing a message when the
parameters are unset, to help debugging the issue.
Only the "changed" state from the last edit-object was used,
this meant the operator would not perform the necessary update
with multi-object edit-mode.
Use "changed" & "changed_multi" naming convention.
Even though lights were part of `SceneStats`, they were not used when
rBfd10ac9acaa0 was committed.
This patch adds the light count back into the statistics. When a light is
the active object, it will display the total number of lights in the
scene, as well as how many lights are currently selected.
{F10141354}
Reviewed By: #user_interface, Severin, Blendify, harley
Maniphest Tasks: T88512
Differential Revision: https://developer.blender.org/D11387
For T78995 we want to change the data structure of keylists to
improve performance. (Probably a Vector with bin-search capabilities).
This patch hides the internal structure of the keylists behind `AnimKeylist`
structure. This allows us to change the internals without 'breaking' where it is
being used.
The change adds functions to create, free, find and walk over the
keylist.
Reviewed By: sybren
Maniphest Tasks: T78995
Differential Revision: https://developer.blender.org/D11974
Currently when dropping an asset the first material slot is always updated.
This patch changes that logic to update the active material slot.
In future the behavior will be updated to use the material slot of the face under the cursor.
That requires better feedback tot he user.
Reviewed By: Severin
Maniphest Tasks: T90372
Differential Revision: https://developer.blender.org/D12056
Setting normals from faces wasn't weighting the faces contribution
by the corner angle, giving lop-sided results in some cases.
This removes the epsilon check for CLNORS_VALID_VEC_LEN,
in favor of matching the behavior of vertex normals exactly.
It will be useful in the spline type conversion node. Theoretically it
could become protected again if that conversion moves out of a node,
which might be a nice improvement after an initial version.
Because mesh vertex and face normals are just derived data, they can
be calculated lazily instead of eagerly. Often normal calculation is
a relatively expensive task, and the calculation is often redundant
if the mesh is deformed afterwards anyway.
Instead, normals should be calculated only when they are needed. This
commit moves in that direction by adding a new function to tag a mesh's
normals dirty and replacing normal calculation with it in some places.
Differential Revision: https://developer.blender.org/D12107
This commit uses OpenVDB more directly for the voxel remesher, without
the extra indirection of copying to a Blender API. This makes the code
simpler, shorter, and easier to understand (though I didn't observe any
performance improvement).
This also removes the rest of the unused and undocumented OpenVDB C API,
which was written when Blender's code didn't really use C++, and doesn't
serve a purpose anymore. Those features will be implemented as nodes in
the future anyway (see D12100).
Differential Revision: https://developer.blender.org/D12097
Caused by rB7fc60bff14a6.
This has actually been reported and closed, but that was clearly a
misunderstanding (above commit changed a checkbox to be an enum, but a
second checkbox was simply removed)
Maniphest Tasks: T78469
Differential Revision: https://developer.blender.org/D12084
This is causing issues for some users launching Blender, because EGL indirectly
requires GLVND, which is not installed by default on e.g. Ubuntu.
This reverts commit 0b18a618b8.
Fixes T90374
Ref D12034
Caused by {rBbbb2e0614fc3}
Since above commit only the playhead is updated as an overlay in
animation playback (was moved out of drawing of the main region for
perfomance reasons).
The driver value "debug" visualization is very useful to have during
playback though but was left in main region drawing as part of
`draw_fcurve` (thus does not update in realtime anymore).
Moving `graph_draw_driver_debug` into the overlay is not feasible
because it requires animation filtering which has significant overhead
which needs to be avoided in the overlay which is redrawn on every UI
interaction.
Now tag the whole main region for updates in the Driver Editor during
playback instead (which will make the Drivers Editor as slow during
playback as before rBbbb2e0614fc3 -- but with realtime updates of the
debug visualization).
Maniphest Tasks: T87041
Differential Revision: https://developer.blender.org/D12003
Add a context menu dedicated to asset operations to the Asset Browser.
There are two separate context menus to keep things separated well and
avoid confusing if-else logic (similar to D12057 & D12059). Their polls
make sure they are displayed for the right contexts only.
Also (to be committed as followup cleanup): Remove now unused special
handling for assets in file delete operator.
Differential Revision: https://developer.blender.org/D12062
So far the Asset Browser just showed the same popups and settings as the
File Browser. Not all of them made sense for the Asset Browser though.
* Don't show inapplicable recursion toggle.
* Don't show sorting options, which don't work with assets anyway.
* Don't show the Filter popover, there are currently no applicable items
in there.
Just like in D12057, I decided to add separate classes for the Asset
Browser case.
Differential Revision: https://developer.blender.org/D12059
So far the Asset Browser just showed the same menus as the File Browser.
Not all of their entries made sense for the Asset Browser though. I
decided to just give them entirely different classes to avoid confusing
if-else checks everywhere. I think the code duplication this adds is a
minor issue, it's better to keep things seperated clearly IMO.
* View menu: Add "Asset Details" toggle for the sidebar region.
* View menu: Remove recursion sub-menu
* View menu: Remove "File Path" region toggle, which doesn't apply for
the Asset Browser.
Differential Revision: https://developer.blender.org/D12057
Originally the operator name was drawn next to the dragging content.
After that there was an option to add custom, static text with the
dragging content. This patch allows dynamic text to be drawn.
The custom text was implemented as out parameter of the poll function
what made the code unclear. This patch introduces a tooltip function
that separates tooltip generation from the poll function.
NOTE: the text should always be returned in its own memory block. This
block will be freed after it is copied in the drag struct.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D12104
`CPPType` can wrap any C++ type so that code can work
with the wrapped type in a generic way. The goal of subclassing
`CPPType` is to provide additional methods for some types.
For example, the `CPPType` for `Array<int>` could have a `.element_type()`
method that returns the `CPPType` for `int`.
Initial, limited implementation of loading a single asset catalog
definition file. These files are structured as follows:
CATALOG_ID virtual/path/of/catalog
SUBCATALOG_ID virtual/path/of/catalog/child
SOMETHING_ELSE some/unrelated/hierarchy
These virtual paths will be used to show the catalog in a tree
structure; the tree structure itself is not part of this commit. Each
asset will have one catalog ID that determines where in that tree the
asset shows up.
Currently only a single catalog definition file can be read; merging
data from multiple such files, and writing them out again after changes
are made, is for future commits.
This commit only contains the code to load a single file, and unittests
to check that this actually works. No UI, no user-facing functionality
yet.
The real fix here is to use some kind of relative error in `customdata_compare`
instead of the absolute error used now. If vertex coordinates get larger in magnitude,
the allowed error should increase as well.
By passing an XrActionMap struct instead of individual action
parameters, action creation from Python can be reduced to a simple
call to XrSessionState.create_action_set().
This will also set any controller pose actions and optionally the
active action set for the session.
When entering characters using IME on Windows, Japanese and Chinese
will both usually result in the first keystroke being duplicated. The
problem is that we are informed too late, after the first key is
pressed, that we are IME composing. This patch ensures we are entering
non-English characters using ImmGetConversionStatus() and then deals
with editing keys (like arrows and backspace) on a per-language basis.
see D11929 for more details.
Differential Revision: https://developer.blender.org/D11929
Reviewed by Brecht Van Lommel
Retrieving a mesh's looptris now take's a const mesh after
rB5f8969bb4b4, which removes the need for this function.
Since it's only two lines, avoiding the use of a separate function
in this case is simpler.
These functions do not change their source or input mesh, so it can
be passed with const, which means in one case that a function doesn't
have to be responsible for freeing its argument mesh, which is a clearly
better separation of concerns.
By the patch made it in master the version value already advanced (see https://developer.blender.org/D11839), so this versioning code needs to be moved down to that point.
This BMesh iterator hadn't been used in C++ code yet, and needed
a macro for a proper cast. The parameter structs need to be initialized
when declared without designated initializers.
They are now always shown in the top-level of the Outliner context menu.
Having them in the ID Data submenu was just a hassle to work with, and
often confusing to users - even if technically correct (the asset status
is part of the ID data).
Part of T82680.
These operators shouldn't be available in the Asset Browser.
https://developer.blender.org/T83556
Added a comment to each operator poll assignment to explicitly mention
the intention. That should also remind devs to decide if the operator
should apply for both file & asset browsing when copy & pasting operator
definition code.
The operator to drop file paths into the File Browser was just checking
if there's an active window. This wasn't really an issue since the
operator was only used as drop-operator for the File Browser. But the
operator would show up in the operator search. Plus, for asset browsing,
we'll also have to check the file browsing mode, so the more specific
poll function will be needed.
* Early exit instead of complex if-else blocks.
* Avoid iterating over entire file list.
* Use `true`/`false` for boolean values.
* Declare variables in smaller scopes.
The Windows-specific "Register File Association" operator would show in
the search menu of other platforms. Decided to not disable it at
compile-time, like we do it with "Toggle System Console" (another
Windows-only operator), because that would require workarounds for the
translation tools. Instead the operator poll function always returns
false on unsupported platforms now.
The operator was register as a "file" operator, which are by convention
used for File Browser operators only. Move it to the "preferences"
operators, where it's displayed in the UI too.
This partially reverts cb0b017d8f: We can't store the asset handle in
the drag data, because the file pointer it wraps may be freed as the
Asset Browser generates its file list.
In `BKE_appdir.h`, include `<stddef.h>` as that defines `size_t`. This
follows the "include what you use" principle, and makes it possible to
use `BKE_appdir.h` without having to bother with its dependencies.
No functional changes.
Registering a property could remove the existing property,
then fail to parse one of the arguments of the new property -
leaving the struct without a property.
Now freeing the existing property is deferred until immediately
before the new property is registered.
- Use `default` instead of `def` abbreviation.
- Rename `BPYPropArrayLength` to `BPyPropArrayLength`
in keeping with other local structs.
- Remove _PyArg_Parser.fname value accidentally left in
(harmless as it's not used).
Macros were used for expanding shared logic for some properties.
Replace this with Python converters & a funciton that handles
deferred registration.
Add generic converter functions for RNA enums:
- pyrna_enum_value_parse_string
- pyrna_enum_bitfield_parse_set
After doing an import, the bounding box of the stroke was not calculated and any operation related to brushes (Sculpt, Weight Paint and Vertex Paint) was not working as expected because the bounding box of the stroke was wrong.
This problem was solved automatically after any edit operation, but must be solved in the import process.
This commit resolves these RNA warnings:
```
offset: "", WARN (bpy.rna): ...\source\blender\python\intern\bpy_rna.c:1505 pyrna_enum_to_py: current value '65536' matches no enum in 'FloatProperty', 'offset', 'subtype'
project_limit: "", WARN (bpy.rna): ...\source\blender\python\intern\bpy_rna.c:1505 pyrna_enum_to_py: current value '65536' matches no enum in 'FloatProperty', 'project_limit', 'subtype'
falloff_radius: "", WARN (bpy.rna): ...\source\blender\python\intern\bpy_rna.c:1505 pyrna_enum_to_py: current value '65567' matches no enum in 'FloatProperty', 'falloff_radius', 'subtype'
```
This will replace GLX with EGL for X11. GLEW does not support GLX and EGL
at the same time. Most distributions build GLEW with GLX support, so we
have to use the externally provided GLEW and build with EGL support.
This effectively sets WITH_SYSTEM_GLEW to OFF for all Linux configurations.
Differential Revision: https://developer.blender.org/D12034
In the graph editor, Mirror Keys by Value would convert the value to mirror
over, to account for different units for linear & rotational properties.
The conversion was done in the different direction, though, resulting in
values that were too large by a factor of (180/pi)^2.
This caused a blender load error on windows N,
given we do not use these codecs they can safely
be disabled.
This will fix T90200 once the new libraries are
in SVN
It was somewhat arbitrary to have this one pass enabled that adds a bit of
additional memory and render time overhead, even though it's not necessarily
more important than others.
Before this, all asset view templates showing the same asset library
would show the same assets, even if they should show different ID types.
That was a major limitation since the design did forsee that this
template can be put anywhere in the UI to display various sub-sets of
assets.
Initially I did the ID type filtering close to the asset-list reading,
because I wanted to optimize reading so that we would only actually read
asset information from disk of the ID type to be shown. But this will be
quite complex and I'm not sure if I'll get to work on this anytime soon.
So this commit moves the filtering to the template display level solving
this limitation.
Note: This also adds the code to filter by tags, together with the ID
type. But it's not actually used anywhere yet.
This iterator was introduced before `AssetHandle` existed, so it was
dealing with the file data directly. Now we want as little code as
possible to deal with the file data, all access should happen via the
`AssetHandle`.
This has been a huge pain to get working, for several reasons (new flags
needed, patching is now mandatory, etc.).
Further more, discovered that debian OIIO package is now silently
relying on OpenCV, without even proper handling of this dependency (at
least in the `-dev` package), so had to revert to force-build own OIIO
again on that distro for the time being.
Ref. T88438.
When `BLI_task_parallel_mempool` does not use threading, the
`userdata_chunk` is allocated locally simulating a TLS.
However `func_reduce` is not called so the original chunk is ignored.
`task_parallel_iterator_no_threads` is another function that doesn't call
`func_reduce`. It also ignores `userdata_chunk_local` in the main iterator.
The solution in these cases is not to create a `userdata_chunk_local`.
This fixes T90131
Differential Revision: https://developer.blender.org/D12067
We shipped the whole bin folder for llvm/clang
while we only needed clang-format, by shipping
just the bits we need we save about 700 megabytes
off our svn lib download.
The preview was always using frame 1, but maybe the object has changed and it's better create preview using the current frame.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D12018
Motion attributes expects mesh to have non-zero number of motion steps,
which was violated in the case when fluid mesh had motion blur disabled.
This is a bit of annoying fix, because of the order of updates. More
ideal solution would be to handle cached and fluid velocities in the
sync_mesh_motion() which ensures all the dependencies between settings.
Add overlay option to disable grid drawing.
Reuse drawing code from other editors (timeline editor)
Add argument `display_minor_lines` to function
`UI_view2d_draw_lines_x__discrete_frames_or_seconds`
This way minor line drawing can be disabled and so it doesn't cause
too much visual noise. Also spacing seems to be too fine, so VSE uses 3x
what is defined in preferences.
Reviewed By: fsiddi, Severin
Differential Revision: https://developer.blender.org/D11790
Snapping by default goes against convention, so this setting was
re-evaluated. Also snapping by default can conflict with new image
transform system, see T90156
There wasn't consensus, so disable snapping by default to follow
established convention.
ref T89665
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12054
Calculate frequency of time/frame label drawing, such that labels have
at least 10px margin and don't overlap.
Change timecode format:
- Use at least `mm:ss` format
- Don't display frames if all labels would end with +00
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D11792
The channel box selection was offset for grease pencil layers.
This is a proposed fix by @yann-lty
Before:
{F10227973}
After:
{F10227974}
Reviewed By: #grease_pencil, antoniov
Maniphest Tasks: T89952
Differential Revision: https://developer.blender.org/D11962
- Multi-dimensional boolean, int and float vector types are supported.
- A sequence of int's for the "size" is used to declare dimensions.
- Nested sequences are required for default arguments.
Now it's possible to define matrix properties, for e.g:
bpy.props.FloatVectorProperty(size=(4, 4), subtype='MATRIX')
Add array conversion functions that take dimension arguments.
- PyC_AsArray_Multi (version of PyC_AsArray).
- PyC_Tuple_PackArray_Multi_* (version of PyC_Tuple_Pack_*).
When viewing font files in the File Manager, this patch uses the font's
family and style names to show the same type of string shown to users
in operating system lists. For example "Book Antiqua Regular" instead
of "BKANT.ttf"
see D12020 for details and examples.
Differential Revision: https://developer.blender.org/D12020
Reviewed by Campbell Barton and Julian Eisel
WITH_CYCLES_DEBUG was used for rendering BVH debugging passes. But since we
mainly use Embree an OptiX now, this information is no longer important.
WITH_CYCLES_DEBUG_NAN will enable additional checks for NaNs and invalid values
in the kernel, for Cycles developers. Previously these asserts where enabled in
all debug builds, but this is too likely to crash Blender in scenes that render
fine regardless of the NaNs. So this is behind a CMake option now.
Fixes T90240
When using "Clear Asset" from the Asset Browser but with an asset
selected that is not stored in the current file, we can show a more
informative error message.
The viewer node in geometry node trees only supports geometry nodes.
This patch ensures that when ctrl shift clicking on a node, it will only
link to geometry sockets.
Differential Revision: https://developer.blender.org/D12055
This code was actually buggy (forcefully re-enabling excluded layers in some
cases).
Further more, it should not be needed now that layerCollection resync code
reuses as much as possible existing layers instead of deleting and
re-creating them all the time.
Differential Revision: https://developer.blender.org/D12016
The goal of this refactor is to improve resync of LayerCollections
hierarchy to match again Collection one.
Current code would destroy and re-create valid layers whenever a parent
collection would be removed, which leads to losing way too often
layer-related settings when editing collection hierarchies.
While this could be partially addressed from operators side, there was
no way to fix those issues from lower level, more generic ID management
code like ID remapping or library override resync processes.
The new code builds a shallow wrapper around existing (aka old) layers
hierarchy, does a set of checks to define the status of all existing
layers, and try to find the closest matching unused layer in cases where
layers and collections hierarchies do not match anymore.
The intent is to both re-use as much as possible existing layers, and
to pick the 'best' possible layer to re-use, following those heuristics:
* Prefer layers children of current one first (in old hierarchy), and only
use those from other higher-level hierarchies if no (grand-)child is found.
* Prefer to use closest layers available in the old hierarchy.
NOTE: The new code is about 12%-15% slower than the previous one, which is
expected given the increased complexity. Note that this would not be an
issue in practice if this code was not called way too often (needs to
be converted to lazy update instead, which is a long known TODO).
NOTE: The LayerCollectionResync code uses its own built-in version of
FIFO queue, as performances in this code is currently a critical point
(it can get called tens of thousands of times during a single (heavy)
ID management operation currently, in a production file e.g.).
Differential Revision: https://developer.blender.org/D12016
When deleting a node, links attached to that node are deleted, but if one
of those links was connected to a multi input socket, the indices of the
other links connected to it were not updated. This adds updates both in
the case of a normal delete as well as after a delete with reconnect.
Differential Revision: https://developer.blender.org/D11716
Followup to rB3834dc2f7b38 (where getting the proper particle system was
fixed for the Adjust Last Operation panel in the Properties Editor). But
since this operator can also be called from the 3DView, get a current
particle system there as well.
Without this, _all_ particle systems would be copied when executing from
the 3DView (which was never really intended [operator description uses
singular] -- it just happens to use `copy_particle_systems_to_object`
internally as well -- same as the `Copy Active/All to Selected Objects`
operators)).
ref. T83317
Maniphest Tasks: T83317
Differential Revision: https://developer.blender.org/D12033
Caused by {rB8cbff7093d65}.
Since above commit only one modifier would get calculated and the
displaylist boundingbox was calculated wrong.
Maniphest Tasks: T90154
Differential Revision: https://developer.blender.org/D12037
Expand camera effective region to a portion beyond image frame so strokes won't end right at the border.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12049
Recent own rBabf3ce811f6e prevented any LayerCollection update during
the whole liboverride resync process, for both performances and feature
reasons.
However that means that the various runtime caches like the Base GHash
are not cleared anymore during ID remapping process, so we need to call
`BKE_main_collection_sync_remap` instead of `BKE_main_collection_sync`
when we finally are ready for this update.
Reported by @eyecandy (Andy Goralczyk) from Blender studio, thanks!
This patch adds propper tooltips to the effect strips in the "Add" menu.
Note that not all effect strips are actually in the "Effect Strips"
submenu like color strips, text strips or transitions. For these types
of effect strips, a dediacted tooltip is especially useful.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D11714
This removes the previous limitation of one interaction profile
(device) per action map by moving the profiles to action bindings.
By doing so, there is no longer the need for users to manually select
an action map, as the XR runtime will automatically select the most
appropriate profile.
An additional DNA action map layer, "XrActionMapBinding", was also
added to store profiles and input-specific properties for actions,
allowing for flexible inputs across devices.
While transforming a strip, draw the background semi-transparent
if it overlaps with another strip. It's convenient to see what's
underneath, especially with the upcoming Overwrite feature.
Thanks to @iss for the help and review.
Pass `-DLINKSTATIC=ON` to the OSL CMake, to ensure it statically links to
our libpng. Previously this was only applied on Windows, it's now on all
platforms.
Add three functions that trim characters from the front & end of a
`StringRef`. All functions return a new `StringRef` that references a
sub-string of the original `StringRef`.
- `trim(chars_to_remove)`: strips all characters from the start and end
that occur in `chars_to_remove`.
- `trim(char_to_remove)`: same, but with a single character to remove.
- `trim()`: remove leading & trailing whitespace, so same as
`trim(" \r\n\t")`
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D12031
Runs tests based on blend files with minimum python interaction.
Developed as part of GSoC 2021 - Regression Testing of Geometry Nodes.
Earlier, tests were built from scratch by adding a modifier/operation
from the Python API.
Now, tests can also be created inside blender and are compared using
Python script.
Features: Automatically adding expected object if it doesn't exist.
This patch adds tests for the following Geometry Nodes category:
* Curves
* Geometry
* Mesh
* Points
The implemented UML diagram for refactoring of mesh test framework.
{F10225906}
Technical Changes:
SpecMeshTest: It adds the modifier/operation based on the Spec provided.
BlendFileTest: It applies already existing modifier/operation from the blend file.
Test folders hierarchy with tests. This folder should be extracted to `lib\tests\modeling`
{F10240651}
Note: The `geometry_nodes` folder might lie under another `geometry_nodes` folder while extracting, please double check. Use the inner-most one.
The hierarchy should be:
-`lib\tests\modeling\geometry_nodes\mesh`
-`lib\tests\modeling\geometry_nodes\points`
and so on.
* From `ctest` the tests should be run as `ctest -R geo_node -C [Configuration]` on Windows.
* Each single test can be run with its entire name e..g `ctest -R geo_node_geometry_join_geometry`.(just an example). Run `ctest -N -R geo_node` to see all tests.
* From blender, the tests can be run `blender -b path\to\blend\file --python path\to\geo_node_test.py`
Reviewed By: zazizizou, JacquesLucke
Differential Revision: https://developer.blender.org/D11611
Failure to return a list of the expected size & type wasn't
decrementing the value, leaking a reference.
Caused by 127b5423d6 a workaround for the
real error that was fixed f5e020a7a6.
This adds the operator name to the node label which is consistent with the shading nodes.
The vector node has `Vector` as a prefix.
The Attribute nodes already have a different coloured header.
The same label is used when collapsing nodes, this helps readability.
Reviewed By: pablovazquez
Differential Revision: https://developer.blender.org/D10749
Builtbot is switching over from json to yaml. Both
configuration files should be kept in sync for now.
The json file will be removed when everything works as expected.
Ths commit adds a new `IDNameLibMap` to `Main`, used during file reading
to quickly find already read linked IDs.
Without that, search would use string-based search over list of linked
data, which becomes extremely slow and inneficient in cases where a lot
of IDs are linked from a same library. See also {T89194}.
Extrem-usecase reported in T89194 is now about 4 times faster in linked
data reading (about 2 times faster for the whole .blend file loading).
More normal cases (like Sprites studio production files) have barely
measurable speed improvements, a few percents at best.
NOTE: `main_idmap` API was extended to support insertion and removal of
IDs from the mapping, avoids having to re-create the whole thing several
time during libraries expansion in readcode.
Differential Revision: https://developer.blender.org/D11757
Makes it so Render Layers node in the compositor is updated as soon
as Use Denoising is changed for the final render.
Differential Revision: https://developer.blender.org/D12010
This diff somewhat snowballed out of updating OIDN to 1.4.1 it had some
changes that allowed us to remove the arm hacks we had in place and
revert to using identical versions for a whole bunch of deps. But that
required an update to ISPC which needed a newer LLVM and if we're
updating LLVM we may as well update OSL, and when we update OSL, OIIO
may as well be dragged in soo......anyhow...
This diff updates:
LLVM 9.0.0 (11.0.1 for mac/arm) -> 12.0.0
OIIO 2.1.15.0 -> 2.2.15.1
OSL 1.11.10.0 -> 1.11.14.1
winflex_bison 2.5.5-> 2.5.24 (ispc needed newer bison, windows only dep)
OIDN 1.4.0 -> 1.4.1
ISPC v1.14.1(random hash for mac/arm) -> v1.16.0
Flex 2.6.4 (ISPC needed newer Flex than available on CentOS 7)
and removes most of the "special arm/mac" versions. I think just ssl and
embree are left with special versions.
notable changes:
@LazyDodo included some clang headers in the linux/mac harvest which are
needed to start writing custom clang based tooling like D9465 these were
already shipping on windows, but not the other platforms.
[macOS] Change the `LC_ID_DYLIB` of OpenMP for {D11997}. This changes
where the executables look for dylibs.
Reviewed By: sebbas, LazyDodo
Differential Revision: https://developer.blender.org/D11748
This patch fixes occlusion function to handle one specific case (when an edge shares a point with triangle) better,especially when there's overlapping edges in this case.
Previously, this option was not exposed in the UI, only for the clip editor.
There were also multiple rna properties that did the same thing for each of the 2D editors.
There was also an issue where the property enum items were the same as the 3d view which didnt make much sense.
Reviewed By: antoniov
Differential Revision: https://developer.blender.org/D12027
When using a pose slider it is possible to hide bones with the 'H' key.
Before this patch the screen didn't update, so you had to move the mouse 1 pixel to update.
This patch makes it so it updates right away
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D12024
Ref: D12024
Adds full frame implementation to this node operation.
No functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11627
Adds full frame implementation to this node operations.
No functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11749
Adds full frame implementation to this node operations.
No functional changes.
Includes a new operation method `init_data` used to initialize any data
needed after operations are linked and resolutions determined.
Once tiled implementation is removed `initExecution` may be renamed
to `init_rendering` and `init_data` to `init_execution`.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11944
This fixes a performance regression on Ampere cards, on specific scenes like
classroom. For cycles-x there is little difference, but this is still helpful
for LTS releases, and we need to upgrade at some point anyway.
This is an easy & safe, yet not-so-nice way to address the
LayerCollections vs. Collections hierarchy resync problem.
Currently this resync is enforced everytime something changes in the
Collections hierarchy, which is extremely inneficient, and can even
produce 'loss' of LayerCollection data during complex Collection
processes.
Current example is during Library Overrides resync process. New code:
* Makes resync significantly faster (between 10 and 15%).
* Fixes 'disappearing' layer collections settings on sub-collections'
layers.
NOTE: This is not a proper fix for the underlying issue. However,
implementing and testing the 'lazy update' solution as proposed by
{T73411} requires a significant amount of time (especially in testing
and tracking all places where code would need to ensure LayerCollections
are up-to-date), which is not possible currently.
Differential Revision: https://developer.blender.org/D11889
Mantflow only supports wavelet noise, thus the parameter with only one option is no longer useful.
Differential Revision: https://developer.blender.org/D6770
In the draw module, it's not easy to identify what its header is, and
where the shared functions are.
So move `draw_cache_extract_mesh_extractors.c` and
`draw_cache_extract_mesh_private.h` to the same folder as the extractors
and rename these files to make them more identifiable.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11991
Fix hold offset check causing missing snapping point when strip have
only still frames.
Fix effect strips of transformed strips causing snapping to prevoius
strip positions.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11948
Label for snapping current frame to strips was cut off and not very readable.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D11951
Cached OCIO processors were not freed, instead the color spaces were freed twice.
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D12011
Fix for T85517
Bug: Couldn't type space while holding down the shift key in text spaces (e.g. when saving a file, changing the name of object).
Changes: Removing the key combination of Shift + space in `WM_event_is_ime_switch` method.
Reviewed By: harley, mont29
Maniphest Tasks: T85517
Differential Revision: https://developer.blender.org/D10452
Six years ago, Bug T44961 about unwanted spikes had me not do a loop
slide if the angle was too extreme, to avoid unwanted spikes.
The current bug showed that that angle was much too big, and limited
desired behavior in many cases. Changing the angle from 0.25 radians
to 0.0001 radians (about 0.006 degrees) still fixes the original bug
and seems very unlikely to be limiting desired behavior now.
The old modifier code, now just used for Fast, has code in it to
flip faces of arguments when their tranform's negativity differs
from the main object's transform's negativity.
I had neglected to put that logic in when I made the change that
skipped the round trip through BMesh.
Fixing this means that the results are more what the user expects
when some or all operands have negative scales.
This patch addresses the issue raised in T88340.
When entering a pose sliding operator bones would automatically get hidden.
While technically not a bug it was decided that it is too confusing.
Hiding with 'H' is still possible though, just won't happen automatically
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D11883
Ref: D11883
Abbreviations are harder to read and understand thus it is best to be direct.
For example without understanding and context it is hard to know exactly what "Len" means.
This change transitions libmv/osd tests to our
blender_add_test_executable macro that explicitly
takes the include directories as a parameter.
This is in preparation for future clean-up of
global include directories.
Differential Revision: https://developer.blender.org/D12012
Reviewed By: sergey
This improve the cloth modeling workflow by allowing you to weld only the
edges that are used for the sewing forces.
Reviewed By: mano-wii, weasel
Differential Revision: https://developer.blender.org/D10710
**Drawing Changes:**
- F-curve drawing for Stretch, Multiply, Length and Frame Number.
- Value drawing when no keyframes for Stretch, Length and Frame Numbers.
General view of the new drawing for each speed effect mode:
{F9796642, size=full}
Detail of the horizontal zero (blue) line in the new `Multiply` mode:
{F9798520, size=full}
Nice to have (but I don't know how):
- Auto adjusting of endframe when using Multiply or Boost.
Differential Revision: https://developer.blender.org/D6110
Addresses T76003. When using VR with Eevee and viewport denoising,
scene geometry could sometimes be occluded for one eye. Solution is
to use a separate GPUViewport/GPUOffscreen for each VR view instead
of reusing a single one for rendering.
Reviewed By: Julian Eisel, Clément Foucault
Differential Revision: http://developer.blender.org/D11858
The core problem is that the geometry nodes modifier sometimes support
"mapping" (i.e. it remembers which new vertices correspond to edit mode
vertices) and sometimes it does not, depending on what the nodes are doing.
Also see rB07ce9910f7cc.
The solution here is that the fallback case in `BKE_mesh_foreach_mapped_edge`
does not call the callback with "invalid" indices.
Differential Revision: https://developer.blender.org/D12007
This might change the rotation of some instances after a Curve to Points.
Unfortunately, there is not much we can do about that, the math before
was just wrong. The forward and up axis stayed the same though.
Differential Revision: https://developer.blender.org/D12006
The problem was that the modifier was reevaluated all the time, even
between showing the attribute search and clicking on the attribute
name. This freed the data referenced by attribute search. The real bug
here was that the dependency graph was tagged for update even
though nothing changed. This was because the spreadsheet thought
its active context has changed and it wanted to compute the new
value to be shown in the spreadsheet.
The reason for the bug was that I confused how the tree-path of a
node editor works. The second element in the tree path contains
the name of the group node in the root tree that we're in (instead
of the first element).
Differential Revision: https://developer.blender.org/D12009
When the new "need_ids" flag is false and the output type is not
one of the valid BMesh kinds, there is no need to propagate even
a dummy id to all of the faces.
Share functionality for single and multi-threaded edge-split tagging.
Remove logic that ensured vert & loop indices in bm_mesh_edges_sharp_tag
(missing from fd9fc809b7).
Improves control over the XR reference space by using the stage ref
space (user-defined tracking bounds) instead of local ref space
(position at application launch), if available. Also adds an
"absolute tracking" session option to skip applying eye offsets that
are normally added for placing users exactly at landmarks.
By enabling absolute tracking, users can define the tracking origin
in a way that is not linked to the headset position. Instead, the
tracking values given by the XR runtime are left unadjusted and a
user can manually calibrate an "origin" landmark object to adjust to
their real world space.
Can be useful for applications that use external tracking systems
and those that primarily only need to use controllers and not the
headset (e.g. motion capture).
The absolute tracking option requires an update to the VR
Scene Inspection addon to be accessible by regular users.
Reviewed By: Julian Eisel
Differential Revision: http://developer.blender.org/D10946
This was added in 0b7f581397
but seems not to be needed as the assignment was never correct
since only one corner on either side of the smooth edge had the
vertex normal written to it.
Merge the sharp edge tagging into bm_mesh_loops_calc_normals,
this has the advantage that edge tagging can be performed as part of
walking over each vertices edges - instead of tagging in a separate loop.
Even though this will tag edges twice (once for each vertex),
the computation isn't heavy as it's only calculating a dot-product
between the two face users to compare the angle.
This change combined with 4ba06ad0a8
makes BM_loops_calc_normal_vcos around 5.68x faster,
with an overall speedup over 2.6x when transforming a high poly mesh.
(tested on a system with 32 cores).
Reviewed By: mont29
Ref D11970
Supported multi-threading for bm_mesh_loops_calc_normals.
This is done by operating on vertex-loops instead of face-loops.
Single threaded operation still loops over faces since iterating
over vertices adds some overhead in the case of custom-normals
as the order used for accessing loops must be the same as iterating
of a faces loops.
From isolated timing tests of bm_mesh_loops_calc_normals on high
poly models, this gives between 3.5x to 10x speedup,
with larger gains for meshes with custom-normals.
NOTE: this is part one of two patches for multi-threaded auto-smooth,
tagging edges as sharp is still single threaded.
Reviewed By: mont29
Ref D11928
Extract the slider gui implemented for the pose slide tools.
Generalise it so it can be used by other tools as well.
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D9314
Ref: D9314
With this commit, node warnings added to nodes during evaluation
(not "Info" warnings) will also draw in the modifier. In the future
there could be a "search for this node" button as well.
Differential Revision: https://developer.blender.org/D11983
Because these handles are calculated lazily, we need to make sure they
are calculated before switching to a manually positioned mode.
I doubt it would ever be necessary, but theoretically this could happen
on a per-point level, to avoid calculating handles not in the selection.
**Changes:**
- New enums correspond to 4 modes: `Stretch`, `Multiply`, `Frame Number` and `Length`.
- "`Multiply Factor`" has been removed;
- Value corresponding to "`use as speed`" enabled is now the value appended to the `Multiply` enum;
- Value corresponding to "`use as speed`" disabled is now the value appended to the `Frame Number` enum;
- Value corresponding to "`Scale to Length`" enabled is now the value appended to the `Length` enum;
- Except `Stretch` each mode has now its respective control values.
Differential Revision: https://developer.blender.org/D11856
It's the case of Image or Movie Clip node when not selecting any
source or an empty one.
Render methods expect an output buffer with size, only render
operations with resolution.
When exiting editmode, customdata [and thus attributes] are copied from
**BMesh** to **Mesh** (in `BM_mesh_bm_to_me`).
When adding attributes, these were always added via
`CustomData_add_layer_named` only.
Instead (if we are in mesh editmode), we need to go through
`BM_data_layer_add_named` to properly update the **BMesh** (see
`update_data_blocks`) so we have stuff available to copy back to
**Mesh** when exiting editmode.
Same is done for removing (also going through BMesh).
This is now done, DomainInfo is updated to point to BMesh (instead of
Mesh) customdata when in editmode.
Maniphest Tasks: T90026
Differential Revision: https://developer.blender.org/D11998
This node takes a curve and a point selection and allows you to set the
specified (or all) points left/right or both handles to a given type.
Differential Revision: https://developer.blender.org/D11992
* Allow specifying a folder and automatically setting the proper executable
name depending on the operating system
* Use executables from configs for listing devices instead of a blender
command being available
On Windows, using `bpy.data.orphans_purge` with some arguments (eg: `do_recursive=True`) does not produce the expected results. This is due to arguments not being parsed correctly on this platform with the current code.
The proposed fix is based on how other functions with boolean attributes are exposed to the Python API.
Reviewed By: #python_api, mont29
Maniphest Tasks: T89733
Differential Revision: https://developer.blender.org/D11963
This was reported in T90026 for attributes, but was also true for:
- UVMaps
- Vertex Colors
- Sculpt Vertex Colors
- Face Maps
For Vertex groups and Shapekeys this was already done (in that their
remove poll would check if there is a vertex group or shapekey to begin
with), now make this consistent across all mentioned types.
Thx @vvv for the initial patch (where this was done for attributes only)
ref T90026
Reviewed By: HooglyBoogly
Maniphest Tasks: T90026
Differential Revision: https://developer.blender.org/D11990
Uses the OpenXR XR_MSFT_controller_model extension to load a glTF
model provided by the XR runtime. The model's vertex data is then
used to create a GPUBatch in the XR session state. Finally, this
batch is drawn via an XR surface draw callback.
Currently does not use the model's texture data, but this can be
supported in the future.
I'm trying to move away from general files with lots of things in them,
and instead have many small & focused files. I find that easier to
work with since everything has clear responsibilities, even if there is
some minor overhead in managing all these files.
I also try to differentiate more clearly between public and internal
files. So source files and internal headers are in a `intern/`
sub-directory, public functions are in a number of headers one level
higher.
For convenience and to make this compatible with our existing general
headers in `editors/include`, I made the `ED_asset.h` there include all
these public headers.
This is of course a bit of an experiment, let's see how it works in
practice.
Also corrected the name of `ED_asset_can_make_single_from_context()`.
The `ibo.tris` extraction in multithread is currently only done if the
mesh has only 1 material.
Now we cache a map indicating the index of each polygon after sort and
thus allow the extraction of tris with materials in multithreaded.
As caching is a heavy operation and was already being performed in
multi-thread for triangle offsets, no significant improvements are
expected.
The benefit will be much greater when we can skip updating the cache
while transforming a geometry.
**Profiling:**
||master:|PATCH:
|---|---|---|
|large_mesh_editing_materials:|Average: 13.855380 FPS|Average: 15.525684 FPS
||rdata 9ms iter 36ms (frame 71ms)|rdata 9ms iter 29ms (frame 64ms)
|subdiv_mesh_final_only_materials:|Average: 28.113742 FPS|Average: 28.633599 FPS
||rdata 0ms iter 1ms (frame 36ms)|rdata 0ms iter 1ms (frame 35ms)
1.1x overall speedup
Differential Revision: https://developer.blender.org/D11445
This was an open TODO, I wanted to have code for translating asset
library references from and to enum values in a central place, and
access that in the same way from both the Asset Browser and the
Workspace RNA code.
* Adds own file for the related functions.
* Adds doxygen comments.
* Updates RNA callbacks to properly use these functions.
* Let these functions call each other, avoid duplicating logic.
Since recently it's possible to access assets from outside the
File/Asset Browser, via the asset view template. So we are slowly
moving away from file space specific code to dedicated asset system
code. I introduced `AssetLibraryReference` as a duplicate of
`FileSelectAssetLibraryUID`, with a plan to delete the latter in a
separate cleanup commit. That's exactly what this commit is.
This will cause Asset Browsers to open with the default "Current File"
Asset Library. We could avoid that, but it's a minor issue really.
This new variable was introduced with 7898089de3. We don't usually use
an `active` prefix variable. Plus, this makes the name match the one of
the Asset Browser active library variable, so we can use the
`rna_def_asset_library_reference_common()` helper for both.
This will cause Asset Views to open with the default "Current File"
Asset Library. We could avoid that, but it's a minor issue really.
Separates controller poses into two components, "grip" and "aim",
which are both required to accurately represent the controllers
without manual offsets.
Following their OpenXR definitions, the grip pose represents the
user's hand when holding the controller, and the aim pose represents
the controller's aiming source.
Currently the wording is a bit unclear: it doesn't specify //what// the particles will be converted into. This clarifies it by stating what the particles will be converted into: they will either be converted to a mesh or the instances will be made real.
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D11795
Fix an incoherence between the Eevee Materials menu and the Cycles Materials menu :
Eevee :
{F10230448}
Cycles :
{F10230449}
Simply Fixed by replacing the Cycles UI code by the Eevee UI code.
Thanks to @Brainzman for helping me create this diff and translate
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D11979
Just add a check for whether the mesh has faces when retrieving an
attribute on the corner domain. In the future there could be an info
message in the node in this case, since maybe it's not intuitive.
Would previously pass a few properties that are available via the
asset-handle now. This asset-handle is also required for some of the
asset API, e.g. the temporary ID loading. This will probably be needed
before too long.
For this to work, the utility function needs to be callable without
context, which is only needed for a File Browser specific hack anyway
(doesn't apply to this usage of it).
While the asset-handle design is supposed to be temporary (see
35affaa971), I prefer keeping the fact that it's nothing but a file
entry pointer an implementation detail that is abstracted away. So this
introduces getters for the file data we typically access for
asset-handles.
Note that the current asset-handle design is temporary, see
35affaa971. I still prefer this to be const, as code outside the
asset-list/file-list code should never mess with the file data of an
asset.
The asset handle design is only temporary (see 35affaa971) and this
RNA property is only needed for internal, technical reasons of the asset
view template. So although not nice, at least make it clear in the RNA
property description that this should not be used.
Using const indexes and offsets helps to make the logic less sequential,
which is hopefully easier to understand and possibly easier to parallelize
in the future. Also order return arguments last.
If there were lots of selected objects without an existing rigid body,
we would add rigid bodies to them one by one.
This would be slow in python, now we instead do this as a batch
operation in C.
On my (Intel) MacBook it used to take 60 seconds and with this change it
takes about 0.3 seconds.
Reviewed By: Sebastian Parborg
Differential Revision: http://developer.blender.org/D11957
Remove the assumption of the pose library that Action groups are named
after the bones in the armature. Even though this assumption is correct
when the keys are created by Blender, action groups can be renamed. Keys
created by Python scripts can also use arbitrary group names.
Since there is more code in Blender making this assumption, and looping
over selected bones is also a common occurrence, this commit contains
some generic functionality to aid in this:
- `BKE_armature_find_selected_bones`: function that iterates over all
bones in an armature and calls a callback for each selected one. It
returns a struct with info about the selection states (all or no bones
selected).
- `BKE_armature_find_selected_bone_names(armature)` uses the above
function to return a set of selected bone names.
- `BKE_pose_find_fcurves_with_bones()` calls a callback for each FCurve
in an Action that targets a bone, also passing it the bone name.
Convert `pose_backup.c` (in C) to `pose_backup.cc` (in C++). This will
make future improvements easier. For now, it's the same code with just
some additional explicit casts (C++ doesn't allow implicitly casting
`void *`), `NULL` changed into `nullptr`, and some other simple changes.
No functional changes.
When done from the Properties Editor, the context's modifier should be
used (this is where the button is located), when done from elsewhere,
the active modifier is still the way to go (since the context modifier is
not available then)
Maniphest Tasks: T89982
Differential Revision: https://developer.blender.org/D11972
The node tagged polys normals dirty, but the function to calculate the
normals didn't clear the dirty flags for polys. Now clear the poly and
corner dirty normal flags.
The test forgot to set the new need_ids field, which luckily
exposed a bug in the C api for delaunay when that field is false.
Fixed the bug and the test, and added a test for the need_ids false
case.
Wording on the UI, slider consistency and material mask switches layout.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: http://developer.blender.org/D11839
Also use `const Curve *` instead of `const Object *`, since the
function works at a lower level than objects anyway.
And also remove another unused function. Since this section of code
for converting curves to meshes will likely be replaced, it's nicer to
see which parts actually remain used at this point.
Function signatures for snap callbacks used `const` incorrectly
which was hidden by casting function types.
This made it seem as if the input arguments wouldn't be change and
wouldn't be initialized.
Name return arguments with an `r_` prefix, order them last,
remove function casts and correct `const` usage.
When fixing issues, seeing operation results can be helpful for
detecting which operation went wrong.
This commit adds an option for exporting all operations results to
image files.
Exceptions are:
- Output operations: They are already exported or can be seen in UI.
- Constant operations: There are too many and is rarely useful.
They are exported to "<temp session folder>/COM_operations/"
with filenames "<operation class name>_<operation id>.png".
Only works on full frame execution mode.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11722
Adds full frame implementation to this node operation.
No functional changes.
2.4x faster than tiled fallback.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11677
Adds full frame implementation to this node operations.
No functional changes.
2.3x faster than tiled fallback on average.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11686
Adds full frame implementation to this node operation.
No functional changes.
No performance changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11698
Adds full frame implementation to this node operation.
No functional changes.
No performances changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11750
Adds full frame implementation to this node operation.
No functional changes.
3x times faster than tiled fallback.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11635
Currently we mostly iterate buffer areas using x/y loops or through
utility methods extending from base classes.
To simplify code in simple operations this commit adds wrappers for
specifying buffer areas and their iterators for raw buffers with any
element stride:
- BufferRange: Specifies a range of contiguous buffer elements from a
given element index.
- BufferRangeIterator: Iterates elements in a BufferRange.
- BufferArea: Specifies a rectangle area of elements in a 2D buffer.
- BufferAreaIterator: Iterates elements in a BufferArea.
- BuffersIterator: Simultaneously iterates an area of elements in an
output buffer and any number of input buffers.
- BuffersIteratorBuilder: Helper for building BuffersIterator adding
buffers one by one.
For iterating areas coordinates it adds `XRange` and `YRange` methods
that return `IndexRange`.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11882
Although currently only the asset list code uses the asset library
reference wrapper, it can stand on its own and may be used in more
places in the future. So I prefer to give it its own source & header
file.
Also removed unused includes, added proper namespaces as per our C++
style guidelines, and removed an unnecessary TODO comment.
No operator or macro should be missing description. But if they do, then
they should use NULL pointer, and not an empty string.
This behavior was already enforced (through an assert) for operators,
previous commit made it the same for macros.
Code dealing with macro operators missing description field was slightly
different than the one from Operator registration.
This lead to invalid memory accesses in some python introspection cases
like the i18n messages extraction code in `bl_i18n_utils` module.
The code used `Spline::LookupResult` in a way that referred to evaluated
points and control points interchangeably. That didn't affect the logic,
but the code became harder to read. Instead, introduce a local struct
to contain the data in a more obvious way.
Some uses of delaunay_2d_calc don't need to know the original verts,
edges, and faces that correspond to output elements.
This change adds a "need_ids" value to the CDT input spec, default true,
which tracks the input ids only when true.
The python api mathutils.geometry.delaunay_2d_cdt gets an optional
final bool argument that is the value of need_ids. If the argument
is not supplied, it is true by default, so this won't break old uses
of the API.
On a sample text test, not tracking ids save about 30% of the runtime.
For most inputs the difference will not be so dramatic: it only really
kicks in if there are a lot of holes.
Regression introduced in {rBbfa3dc91b754}.
`ID_RECALC_GEOMETRY` should tag all operations of the `GEOMETRY`
component and not just the operation of node `GEOMETRY_EVAL_INIT`.
This node implements shortening each spline in the curve based on
either a length from the start of each spline, or a factor of the
total length of each spline, similar to the "Start & End Mapping"
panel of curve properties.
For Bezier curves, the first and last control points are adjusted
to maintain the shape of the curve, but NURB splines are currently
implicitly converted to poly splines.
The node is implemented to avoid copying where possible, so it outputs
a changed version of the input curve rather than a new one.
Differential Revision: https://developer.blender.org/D11901
After rB3b6ee8cee708 by @HooglyBoogly vertex groups were moved
to mesh data, and versioning code was provided to upgrade old
files. However, it fails to consider the case of linked duplicates
having different name lists, and dependent on the object order
can cause some of the names to be lost. This can even be all of
them, if there is a duplicate without any names, which can be
easily created by lazy Python code.
To fix this, change the code to use the longest available name list.
Differential Revision: https://developer.blender.org/D11958
Using part of a patch from Erik Abrahamsson, this replaces the
use of linked lists for original id tracking by Sets.
I had thought that the lists were unlikely to grow to more than
a few elements, but when the mesh has a lot of holes (whose
original ids go *outside* the hole, and therefore, most of the
mesh), this assumption can be very wrong.
On a Text regression test, the time went from 11.67s to 0.16s
with this fix. I also tested to make sure that Boolean didn't
slow down with this, and found it actually had a very slight speedup.
Using Sets exposed a dependency on the ordering of the items
in the id lists, luckily caught by a mesh intersect regression test,
so fixed that.
Scaling down images could create images with a width or height of zero.
Clamp at 1 to prevent a crash, also add an assert to scaling functions.
Ref D11956
`split_multicam` used split operator, where if more strips than
multicam were selected, all would be split, which is undesirable.
Add `Sequence.split()` RNA API function. to split individual strips.
Function accepts `frame` and `split_method arguments`. Returns right
strip after splitting.
In case when strip being split have effects, these will be split too, so
no invalid state should be created.
Selection is not handled, this is by design up to user.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11926
This will help enable development on optimizations to the perimeter
calculation here. Using C++ data structures like Array can make the
code easier to read as well.
Longer term, this can help improve integration with attributes
and possibly the new curve code (since strokes and curves are
quite similar in theory).
Differential Revision: https://developer.blender.org/D11941
We need to be more strict about trying to retrieve a list of vertex group
names from objects now, as only three object types support them.
This commit adds a check for vertex group support in a few places, the
data transfer operator/modifier, copying vertex groups to selected
objects, and the vertex group remove and clear functions.
Differential Revision: https://developer.blender.org/D11947
When a vertex group is used to limit the influence of the modifier
to a subset of vertices, binding data for vertices with zero weight
is not needed. This wastes memory, disk space and CPU cycles.
If the vertex group contents is known to be final and constant,
it is reasonable to optimize by only storing data group vertices.
This has to be an option in case the group can change.
Supporting this requires adding a vertex index field and spliting
the vertex count into mesh and bind variants, but both happen to
fit in available padding. The old numverts field is renamed to the
new bound vertex count field to maintain the array length invariant.
Versioning is used to initialize the other new fields.
If a file with sparse binding is opened in an old blender version,
it is corrupted into a non-sparse bind with vertex count mismatch,
preventing the modifier from working until rebind.
Differential Revision: https://developer.blender.org/D11924
`POINT_CACHE_RESET` pointed to `GEOMETRY_EVAL_INIT` while
`GEOMETRY_EVAL_INIT` pointed to `POINT_CACHE_RESET`.
Now `POINT_CACHE_RESET` points to the same nodes pointed to by
`GEOMETRY_EVAL_INIT` thus avoiding the dependency cycle.
The crash happens because `GPU_offscreen_create` is called with `err_out` `NULL`.
This patch proposes a solution within the `GPU_offscreen_create` itself
and raises an error report in the interface if a menu is called with
dimensions beyond what is supported.
Ref T89782
Maniphest Tasks: T89782
Differential Revision: https://developer.blender.org/D11927
The `action_preview_render()` function used to just render, but now it
also temporarily applies the pose. Its comment is now updated for this.
No functional changes.
Replaces current ID Mask node Anti-Aliasing operation by SMAA
operations with default settings as proposed by Jeroen Bakker.
SMAA produces smoother edges.
Reviewed By: manzanilla
Differential Revision: https://developer.blender.org/D11881
In driver editor, vertically flip the value debug lines to align
them with the timeline header values. This makes it easier to read
the values. Also set the line width explicitly, which was incorrect
in some cases.
Differential Revision: https://developer.blender.org/D8877
This move was already prepared with 788d380460 and 26b098c04f. The
template is quite big already, better to give it its own file. Plus it
could use some C++ features like RAII and maybe some more object
oriented code. I plan further refactoring there.
It turns out `BKE_mesh_copy_parameters` can be called while other
tools are running calculations, which meant that it was called at the
same time as `armature_deform_coords_impl`. Beause of that, we
shouldn't do any freeing (of the old vertex group names) there.
Since the materials are copied in the "for_eval" version anyway,
it seems to make sense to copy the vertex group name list there also.
Fixes T89877, and also the failing `deform_modifiers` test.
Differential Revision: https://developer.blender.org/D11936
The new Asset Browser-based pose library is partially implemented in an
add-on. This commit enables the add-on by default, as the old pose
library was built-in and thus always enabled.
The ability to disable the add-on is there mostly for cases where
people/studios want to use their own custom pose library.
Correct cases where the X-axis of the bone (in pose space) aligns with
the pose-space Y or Z-axis. In these cases the decomposition of the
matrix fails, and a negative scale of the X-axis turns into a 180°
rotation around the Y-axis. An extra -1 scale to the X and Z axes of the
resulting matrix seems to fix things.
The asset view UI template is a mini-version of the Asset Browser that
can be placed in regular layouts, regions or popups. At this point it's
made specifically for placement in vertical layouts, it can be made more
flexible in the future.
Generally the way this is implemented will likely change a lot still as
the asset system evolves.
The Pose Library add-on will use the asset view to display pose
libraries in the 3D View sidebar.
References:
* https://developer.blender.org/T86139
* https://code.blender.org/2021/06/asset-browser-project-update/#what-are-we-building
* https://code.blender.org/2021/05/pose-library-v2-0/#use-from-3d-viewport
Notes:
* Important limitation: Due to the early & WIP implementation of the
asset list, all asset views showing the same library will show the
same assets. That is despite the ID type filter option the template
provides. The first asset view created will determine what's visible.
Of course this should be made to work eventually.
* The template supports passing an activate and a drag operator name.
The former is called when an asset is clicked on (e.g. to apply the
asset) the latter when dragging (e.g. to .blend a pose asset). If no
drag operator is set, regular asset drag & drop will be executed.
* The template returns the properties for both operators (see example
below).
* The argument list for using the template is quite long, but we can't
avoid that currently. The UI list design requires that we pass a
number of RNA or custom properties to work with, that for the Pose
Libraries should be registered at the Pose Library add-on level, not
in core Blender.
* Idea is that Python scripts or add-ons that want to use the asset view
can register custom properties, to hold data like the list of assets,
and the active asset index. Maybe that will change in future and we
can manage these internally.
As an example, the pose library add-on uses it like this:
```
activate_op_props, drag_op_props = layout.template_asset_view(
"pose_assets",
workspace,
"active_asset_library",
wm,
"pose_assets",
workspace,
"active_pose_asset_index",
filter_id_types={"filter_action"},
activate_operator="poselib.apply_pose_asset",
drag_operator="poselib.blend_pose_asset",
)
drag_op_props.release_confirm = True
drag_op_props.flipped = wm.poselib_flipped
activate_op_props.flipped = wm.poselib_flipped
```
So far all UI lists had to be defined in Python, this makes it possible
to define them in C as well. Note that there is a whole bunch of special
handling for the Python API that isn't there for C. I think most
importantly custom properties support, which currently can't be added
for C defined UI lists.
The upcoming asset view UI template will use this, which needs to be
defined in C.
Adds a new file `interface_template_list.cc`, which at this point is
mostly a dummy to have a place for the `ED_uilisttypes_ui()` definition.
I plan a separate cleanup to move the UI-list template to that file.
This button type shows a preview image above centered text, similar to
the File Browser files in Thumbnail Display Mode or the default Asset
Browser display. In fact we may want to port these over to use the new
button type at some point.
Will be used by the asset view UI template that will be added in a
following commit. That is basically a mini version of the Asset Browser
that can be displayed elsewhere in the UI.
If a text button is activated that is not in view (i.e. scrolled away),
the scrolling will now be adjusted to have it in view (with some
small additional margin). While entering text, the view may also be
updated should the button move out of view, for whatever reason. For the
most part, this feature shouldn't be needed and won't kick in, except
when a clicked on text button is partially out of view or very close to
the region edge. It's however quite important for the previously
committed feature, that is, pressing Ctrl+F to start searching in a UI
list. The end of the list where the scroll button appears may not be in
view. Plus while filtering the number of visible items changes so the
scrolling has to be updated to keep the search button visible.
Note that I disabled the auto-scrolling for when the text button spawned
an additional popup, like for search-box buttons. That is because
current code assumes the button to have a fixed position while the popup
is open. There is no code to update the popup position together with the
button/scrolling.
I also think that the logic added here could be used in more places,
e.g. for the "ensure file in view" logic the File Browser does.
Adds an operator invoked by default with Ctrl+F that while hovering a UI
list, opens the search field of the list and enables text input for it.
With this commit the search button may actually be out of view after
Ctrl+F still. The following commit adds auto-scroll to solve that.
A downside is that in the Properties, there also is Ctrl+F to start
the editor-wide search. That's not unusual in Blender though (e.g.
scolling with the mouse over a UI list also scrolls the list, not the
region).
Makes it possible to create tooltips for UI list rows, which can be
filled in .py scripts, similar to how they can extend other menus. This
is used by the (to be committed) Pose Library add-on to display pose
operations (selecting bones of a pose, blending a pose, etc).
It's important that the Python scripts check if the UI list is the
correct one by checking the list ID.
For this to work, a new `bpy.context.ui_list` can be checked. For
example, the Pose Library add-on does the following check:
```
def is_pose_asset_view() -> bool:
# Important: Must check context first, or the menu is added for every kind of list.
list = getattr(context, "ui_list", None)
if not list or list.bl_idname != "UI_UL_asset_view" or list.list_id != "pose_assets":
return False
if not context.asset_handle:
return False
return True
```
Add improved arrow key walk navigation in grid layout UI List templates.
Pressing up or down walks the active item to the adjacent row in that
direction, while left and right walk through the items along the columns
wrapping at the rows.
Note from Julian:
In combination with the following commit, this has the important
limitation that the list's custom activate operator won't be called when
"walking over" an item that is scrolled out of the list. That is because
we don't actually create any buttons for those that could be used for
the handling logic. For our purposes of the pose libraries that should
be fine since the asset view list is always made big enough to display
all items. Solving this might be difficult, we don't properly support
nesting boxes with proper scrolling in regular layouts. It's all just
hacked a bit for UI-lists to work. Overlaps quite a bit with T86149.
Differential Revision: https://developer.blender.org/D11063
For pose libraries, we need to be able to apply a pose whenever
activating (clicking) an item in the Pose Library asset view and blend
it by dragging (press & move). And since we want to allow Python scripts
to define what happens at least when activating an asset (so they can
define for example a custom "Apply" operator for preset assets), it
makes sense to just let them pass an operator name to the asset view
template. The template will be introduced in a following commit.
This new layout type is meant for the upcoming asset view UI template.
With it it is possible to show big asset previews with their names in a
responsive grid layout.
Notes:
* The layout is only available for C defined UI lists. We could expose
it to Python, but I think there are still some scrolling issues to be
fixed first. (The asset view template doesn't use scrolling for the UI
list.)
* I'd consider this a more usable version of the existing `GRID` layout
type. We may remove that in favor of the new one in future.
This is more of a first-pass refactor for the UI list template. More
improvements could be done, but that's better done separately. Main
purpose of this is to make the UI list code more manageable and ready
for the asset view template.
No functional changes for users.
* Split the huge template function into more manageable functions, with
clear names and a few structs with high coherency.
* Move runtime data management to the template code, with a free
callback called from BKE. This is UI data and should be managed at
that level.
* Replace boolean arguments with bit-flags (easily extendable and more
readable from the caller).
* Allow passing custom-data to the UI list for callbacks to access.
* Make list grip button for resizing optional.
* Put logic for generating the internal UI list identifier (stored in
.blends) into function. This is a quite important bit and a later
commit adds a related function. Good to have a clear API for this.
* Improve naming, comments, etc.
As part of further cleanups I'd like to move this to an own file.
When generating a preview image for a pose, temporarily apply it to the
armature. Contrary to the usual pose application, this ignores the
selected bones and always applies the entire pose.
Introduce new pose library, based on the Asset Browser. Contrary to the
old pose library (in `editors/armature/pose_lib.c`), which stored an
entire library of poses in an `Action`, in the new library each pose is
its own `Action` datablock. This is done for compatibility with the
asset browser, and also to make it easier to attach preview images,
share datablocks, etc. Furthermore, it opens the door to having
animation snippets in the pose library as well.
This commit contains the C code for the pose library; in order to fully
use it, an addon is required as well (which will be committed shortly).
Add function `BKE_pose_apply_action_blend()`, which blends a given
Action into current pose. The Action is evaluated at a specified frame,
and the result is applied to the armature's pose.
A blend factor can be given to blend between the current pose and the
one in the Action. Quaternions are interpolated with SLERP; it is
assumed that their FCurves are consecutively stored in the Action.
This function will be used in the upcoming new Pose Library.
New function `BKE_pose_apply_action_all_bones()`, which will be
necessary for the upcoming pose library v2.0.
This renames the function `BKE_pose_apply_action` to
`BKE_pose_apply_action_selected_bones`, to reflect that it only works on
selected bones, to contrast it to the new function.
Add operator 'Open Blend File' to the Asset Browser. This operator:
- starts a new Blender process,
- opens the blend file containing the asset,
- monitors the new Blender process, and when it stops,
- reloads the assets to show any changes made.
This is an editor-level abstraction for the `BLO_library_temp_xxx()`
API for temporary loading of data-blocks from another Blend file. It
abstracts away the asset specific code, like asset file-path handling
and local asset data-block handling.
Main use-case for this is applying assets as presets that are based on
data-blocks, like poses. Such preset assets are an important part of the
asset system design, so such an abstraction will likely find more usage
in the future.
Adds the following to `bpy.types.FileSelectEntry`:
* `id_type`: The data-block type the file represenets, if any.
* `local_id`: The local data-block it represents, if any (assets only).
And the following to `bpy.types.AssetHandle`:
* `local_id`: The local data-block the asset represents, if any.
This kind of information and the references are important for asset related
operators and UIs. They will be used by upcoming Pose Library features.
Implements a basic, WIP version of the asset list. This is needed to
give the asset view UI template asset reading and displaying
functionality.
See:
* Asset System: Data Storage, Reading & UI Access - https://developer.blender.org/T88184
Especially the asset list internals should change. It uses the
File/Asset Browser's `FileList` API, which isn't really meant for access
from outside the File Browser. But as explained in T88184, it does a lot
of the stuff we currently need, so we (Sybren Stüvel and I) decided to
go this route for now. Work on a file-list rewrite which integrates well
with the asset system started in the `asset-system-filelist` branch.
Further includes:
* Operator to reload the asset list.
* New `bpy.types.AssetHandle.get_full_library_path()` function, which
gets the full path of the asset via the asset-list.
* Changes to preview loading to prevent the preview loading job to run
eternally for asset views. File Browsers have this issue too, but
should be fixed separately.
It's useful to know where an asset is stored in, before this there was no way
to tell this. This could probably be displayed nicer in the UI but we're
currently unsure how. But at least the information is there now.
With temporary I mean that this is not intended to be part of the
eventual asset system design. For that we are planning to have an
`AssetRepresentation` instead, see T87235. Once the `AssetList` is
implemented (see T88184), that would be the owner of the asset
representations.
However for the upcoming asset system, asset browser, asset view and
pose library commits we need some kind of asset handle to pass around.
That is what this commit introduces.
Idea is a handle to wrap the `FileDirEntry` representing the asset, and
an API to access its data (currently very small, will be extended in
further commits). So the fact that an asset is currently a file
internally is abstracted away. However: We have to expose it as file in
the Python API, because we can't return the asset-handle directly there,
for reasons explained in the code. So the active asset file is exposed
as `bpy.context.asset_file_handle`.
For the Asset Browser, this returns the active asset library of the
Asset Browser, otherwise it returns the one active in the workspace.
This gives simple access to the active asset library from UI code and
Python scripts. For example the upcoming Pose Library add-on uses this,
as well as the upcoming asset view template.
This per-workspace active asset library will be used by the asset views
later. Note that Asset Browsers have their own active asset library,
overriding the one from the workspace.
As part of this the `FileSelectAssetLibraryUID` type gets replaced by
`AssetLibraryReference` which is on the asset level now, not the
File/Asset Browser level. But some more work is needed to complete that,
which is better done in a separate commit.
This also moves the asset library from/to enum-value logic from RNA to
the editor asset level, which will later be used by the asset view.
Update vertex weights between simulation steps if they have changed.
This allows for animated vertex weights in the cloth sim.
Reviewed By: Sebastian Parborg
Differential Revision: http://developer.blender.org/D11640
The `__enter__` function of the `bpy.data.libraries.load` context manager
was storing a pointer to a stack-allocated variable, which was subsequently
used in the `__exit__` function, causing a crash. This is now fixed.
Thanks @Severin for the patch.
If text strips have the same start frame but are stacked on top of each
other in different channels the order in which they are written in the
.rst file was random before.
Reviewed By: Richard Antalik
Differential Revision: https://developer.blender.org/D11903
Mainly naming (also droping the `layer_collection` in favor of just
`layer` for internal code, this is clear enough and much shorter). Add
proper parent/child identifiers, `r_` prefix for parameters also used as
return values, etc.
Also made some parameters const.
The original refactor for vertex groups (3b6ee8cee7)
forgot to bump the minimum file requirement.
I'm also bumping the subversion to 12 so everyone can switch to a
working subversion number.
Differential Revision: https://developer.blender.org/D11931
This makes node trees with long links that cross other nodes easier to work with.
Dimmed links will be ignored by various modal operators like cut and reroute insertion.
Differential Revision: https://developer.blender.org/D11813
We were manually setting the compiler flags
for C++17 support for this previously. CMake
can do this for us in a uniform way without
having to worry about compiler specifics.
Setting these flags manually somehow brought
out some unwanted behaviour (CMake switching
back to C++14) in the nightly CMake builds.
Unsure if that's a CMake bug or planned
new behaviour for future version, but best
to play it safe.
These flags are supported since CMake 3.1
so should not break anything.
Reviewed by: Campbell Barton
Differential Revision: https://developer.blender.org/D11891
This logic is from the curve sundivide node, used to add points with
proper handles in between two existing points. However, the same logic
is used for trimming of Bezier splines, and possibly interactive point
insertion in the future, so it's helpful as a general utility.
The logic is converted to depend on a bezier spline instead of being
static. A temporary segment spline can be used for the latter use case.
This adds id_properties_clear() and id_properties_ensure() functions
to RNA structs. This is meant as an initial change based on discussion
in review of D9697. However, they may be useful in other situations.
The change requires refactoring the internal idproperties callback to
return a pointer to the IDProperty pointer, which actually turns out
to be quite a nice cleanup.
An id_properties attribute could be added in the future potentially.
Differential Revision: https://developer.blender.org/D11908
The general graphing mechanism will create one graph for each output
variable. So it's not limited to time and memory, but that is what the
Cycles tests now output.
The BKE_gpencil_stroke_add_points API function worked well for
creating the primitives in the add object menu, but it expected a
specific data format that doesn't make sense in a dynamic context.
As evidence of that we can see the way source data was duplicated
in the line art file just to use this API function.
This commit solves that problem in two ways:
- Clean up the line art function (this should make it faster too).
- Move/rename the function so its intended use is more clear.
Differential Revision: https://developer.blender.org/D11909
Non-pointer-like properties that are not editable should never generate
override operations.
While harmless (those would never be applied back anyway), better not
clutter override operations list, and also enjoy the symbolic
performances improvement here.
NOTE: Pointer-like properties (pointers and collections) remain
processed as usual here since they usually imply recursivity. We could
make an exception to the exception for ID pointers, but for now I don't
think this is worth it.
Issue would happen when the original, linked data already had 'Disk Cache'
setting enabled. Override would then see no difference with linked data,
and not create any rule for it (as expected).
Root of the issue was that in Cloth modifier copy code, those disk cache
settings were not copied at all, so every time local overrides were
re-generated by copying linked data, those flags would be reset to their
default values.
NOTE: this might exist in other PointCache usages as well, but this code is
in such a bad state that I'd rather do minimal strictly needed changes
there, on a case-by-case basis. Proper recode of that whole system is
wayyyyy out of scope here.
When image strip is added from python using `image_strip_add` operator
and directory path is not terminated with slash, last part of directory
was ignored.
Use `BLI_join_dirfile` instead of simple string concatenation.
Constraining to X axis caused snapping to not work at all. Constraining
to Y axis caused snapping indicator to be drawn, when snapping doesn't
occur.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11898
nodes or sockets" error
rBfe22635bf664 introduced a utility to check for this (but it was always
returning true).
This wasnt a problem in master (since it is unused there), but in the
2.93 branch, this utility is actually used and the error results in all
geometry nodetrees to appear with the "Node group has unidentified nodes
or sockets" message (and being unusable).
Now return false in has_undefined_nodes_or_sockets if all nodes and
sockets have been successfully checked.
This commit then needs to end up in the 2.93 branch.
Maniphest Tasks: T89851
Differential Revision: https://developer.blender.org/D11911
Socket inspection helps with debugging a geometry node group.
Now, when hovering over a socket, a tooltip will appear that provides
information about the data in the socket. Note, socket inspection only
works for sockets that have been computed already. Nodes that are not
connected to an output are not computed.
Future improvements can include ui changes to make the tooltip look
more like in the original design (T85251). Furthermore, additional
information could be shown if necessary.
Differential Revision: https://developer.blender.org/D11842
Use more direct access to next/previous vertices.
- `BM_edge_other_vert(l_curr->e, l_curr->v)` -> `l_curr->next->v`.
- `BM_edge_other_vert(l_curr->prev->e, l_curr->v)` -> `l_curr->prev->v`.
Add asserts to keep the intention clear.
Adds full frame implementation to this node operations.
No functional changes.
2.5x faster than tiled fallback on average.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11690
Not causing issues in current master because all buffer areas are at
(0, 0) position and `Extend` is not used. But areas may be at any
position in future developments and it will crash.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11784
Link sockets are always connected to inserted translate or scale
operation `Color` sockets even when they have different data type.
This causes crashes on full frame mode when operations read inputs
with non expected datatypes.
Because data type conversions need to be executed before, convert
resolutions must ensure same datatypes are linked.
This commit moves the storage of `bDeformGroup` and the active index
to `Mesh`, `Lattice`, and `bGPdata` instead of `Object`. Utility
functions are added to allow easy access to the vertex groups given
an object or an ID.
As explained in T88951, the list of vertex group names is currently
stored separately per object, even though vertex group data is stored
on the geometry. This tends to complicate code and cause bugs,
especially as geometry is created procedurally and tied less closely
to an object.
The "Copy Vertex Groups to Linked" operator is removed, since they
are stored on the geometry anyway.
This patch leaves the object-level python API for vertex groups in
place. Creating a geometry-level RNA API can be a separate step;
the changes in this commit are invasive enough as it is.
Note that opening a file saved in 3.0 in an earlier version means
the vertex groups will not be available.
Differential Revision: https://developer.blender.org/D11689
When adding texts or various simple effects I often copy-paste strips
to reuse properties from a template such as font or position. I assume
this is common workflow. Issue with this workflow is, that active strip
is not changed after pasting, so when adjusting property, it is original
strip that is being modified.
This is not issue when duplicating strips - selection state is
transfered to duplicate strips, such that duplicate of active strip is
set to be active and duplicate of selected strip is set to selected.
Implement same selection transfering behavior in paste operator, that
exists in duplicate operator.
Since strip can be deleted after copying, it is not possible to rely
on sequencer state. This is true even when pasting strips to different
scene. Therefore active strip name must be stored in clipboard.
Reviewed By: sergey, Severin
Differential Revision: https://developer.blender.org/D11781
Caused by fba9cd019f, then fixed by 0e4245bc28, but without
subversion bump, so some files were still broken after fix.
Repeat fix again, but this time also bump subversion.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D11864
Use the same partial-update functions used by transform when
editing vertex locations with the number buttons.
This avoids unnecessary calculations for normals and tessellation.
This gives around 1.44x overall speedup on high poly meshes.
Support for begin/update/end callbacks allowing state to be cached
and reused while dragging a number button or slider.
This is done using `UI_block_interaction_set` to set callbacks.
- Dragging multiple buttons at once is supported,
passing multiple unique events into the update function.
- Update is only called once even when multiple buttons are edited.
- The update callback can detect the difference between click & drag
actions so situations to support skipping cache creation and
freeing for situations where it's not beneficial.
Reviewed by: Severin, HooglyBoogly
Ref D11861
In most cases the undo system was loading undo steps twice.
This was needed since some undo systems (sculpt, paint, text)
require stepping out of the current undo step.
Use a flag to limit this to the undo systems that need it.
This improves performance for other undo systems.
This gives around 1.96x speedup in edit-mesh for high-poly objects.
Reviewed by: mont29
Ref D11893
- Tag the object data instead of the object when decoding
(this avoids duplicating mesh object-data on each undo-step).
- Calculate face normals as part of multi-threaded tessellation.
This gives ~11% speedup with 1.5x million polygons.
Rename:
- EDBM_mesh_free -> EDBM_mesh_free_data
BKE_editmesh_free -> BKE_editmesh_free_data
Since this doesn't free the edit-mesh pointer.
- BKE_editmesh_free_derivedmesh -> BKE_editmesh_free_derived_caches
Since this no longer uses derived-mesh, match naming for the related
object function BKE_object_free_derived_caches.
Also remove `do_tessellate` argument from BKE_editmesh_create,
since the caller can explicitly do this if it's needed,
with the advantage that it can be combined with normal calculation
which is faster on high-poly meshes.
All platforms support the proper format string and it's already used in
various other places.
Differential Revision: https://developer.blender.org/D11460
During a mesh transformation in edit mode (Move, Rotate...), only part of
the batch cache needs to be updated.
This commit allows only update only the drawn batches seen in
`BKE_object_data_eval_batch_cache_deform_tag` if the new
`ID_RECALC_GEOMETRY_DEFORM` flag is used.
This new flag is used in the transforms operation for edit-mesh and
results in 1.6x overall speedup in heavy subdiv cube.
Differential Revision: https://developer.blender.org/D11599
This might be an artistic choice, but round end caps are supposed to be
a "half circle centered at the end point of the line" as documented
here: https://docs.blender.org/manual/en/dev/render/freestyle/
parameter_editor/line_style/strokes.html#caps
They are a shashed half circle instead.
This patch makes this pure half circles [and also fixes the case where
thickness of beginning was used for both beginning and end of the
stroke]
Maniphest Tasks: T88015
Differential Revision: https://developer.blender.org/D11340
This commit adds a curve primitive node for creating squares,
rectangles, trapezoids, kites, and parallelograms. It also includes
a mode where the four points are just vector inputs.
Differential Revision: https://developer.blender.org/D11665
In this bug report it resulted in rendering animations stopping too early,
but this affected more areas.
After the previous cleanup commit, it becomes clear that frame and ctime
values were mixed up.
Confusingly, BKE_scene_frame_get did not match the frame number as expected by
BKE_scene_frame_set. Instead it return the value after time remapping, which
is commonly named "ctime".
* Rename BKE_scene_frame_get to BKE_scene_ctime_get
* Add a new BKE_scene_frame_get that matches BKE_scene_frame_set
* Use int/float depending if fractional frame is expected
It always bothered me that we'd do the `BLI_assert(... || !"message")` trick to
print a message alongside the assert, while it should be trivial to have a way
to pass an extra string as additional argument.
This adds `BLI_assert_msg()` with a second argument for a message. E.g.:
```
BLI_assert_msg(
params->rename_id == NULL,
"File rename handling should immediately clear rename_id when done, because otherwise it will keep taking precedence over renamefile.");
```
On failure this will print like this:
```
0 Blender 0x00000001140647a3 BLI_system_backtrace + 291
[...]
13 Blender 0x00000001092647a6 main + 3814
14 libdyld.dylib 0x00007fff203d8f5d start + 1
BLI_assert failed: source/blender/editors/space_file/file_ops.c:2352, file_directory_new_exec(), at 'params->rename_id == ((void*)0)'
File rename handling should immediately clear rename_id when done, because otherwise it will keep taking precedence over renamefile.
```
Reviewed by: Sybren Stüvel, Jacques Lucke, Sergey Sharybin, Campbell Barton
Differential Revision: https://developer.blender.org/D11827
The 'collection' property is flagged PROP_ID_REFCOUNT, so the
modifiers foreachIDLink functions should walk with IDWALK_CB_USER
(instead of IDWALK_CB_NOP).
Otherwise the modifier wont be included as a user for the collection
(e.g. on file read); removing the collection from the modifier will
decrement usercount though (which in worst case scenario makes the
collection orphan and will result in data loss)
Maniphest Tasks: T89765
Differential Revision: https://developer.blender.org/D11877
When editing vertices with number buttons, tag the mesh, not the object.
This prevents the evaluated mesh being re-created for the object
and is correct as the mesh is being edited not the object.
Note that all tags for updating object geometry should be checked
to see if this change should be applied there too.
From a simple test on a high-poly mesh this gives around 1.3x
overall speedup.
After cache implementation line art apply will not show strokes properly, now fixed.
# Conflicts:
# source/blender/gpencil_modifiers/intern/MOD_gpencillineart.c
The Pattern and Search display options in the Clip Editor display settings
are independent and should not be grayed out since those options
remain relevant even with path display turned off.
Alternative solution were propoesed in D11630 and D11715
but each of those patches had downsides.
This solution is the simplest and does not break muscle memory.
Channel packed images should not have their RGB affected by alpha.
rendering in Cycles and Eevee was fine already, but displaying these was
not right in the Image and Node editors.
Not 100% sure what to do for the "Color and Alpha" mode, but I guess
this should stay like it was before (applying the alpha).
"Color", "R", "G", and "B" modes were changed to not have color be
affected by alpha though.
ref. T89034
Maniphest Tasks: T89034
Differential Revision: https://developer.blender.org/D11871
Fly navigation has always had this option. They is particularly useful
when users use "Trackball" as their orbit method.
For walk navigation this works as a one off option. Not as a toggle like
for fly navigation.
Differential Revision: https://developer.blender.org/D11863
Correctly reset `prev` and `next` pointers of action group FCurves when
separating them into distinct `ListBase`s per `bActionGroup`.
These `NULL` pointers are necessary to temporarily demarcate the start &
end of the `bActionGroup::channels` list. Having them still point to
other FCurves caused ordering issues when moving curves towards the
start/end of a group.
This commit corrects the above issue and adds versioning code to rectify
any ordering issues that may have been caused. For this purpose the
`BKE_action_groups_reconstruct()` function is rewritten to avoid relying
on the `bAction::curves` list order or `prev` link integrity.
Differential Revision: https://developer.blender.org/D11811
Simple upgrade of OpenXR to 1.0.17. A version bump was enough, no
Blender code had to change.
Reviewed By: LazyDodo, mont29
Differential Revision: https://developer.blender.org/D11848
It was possible that render buffers and scene kernel data will be out
of sync because reset and scene update happens in different locks.
This is similar issue we've fixed in the Cycles X branch, so backported
relevant changes from there.
This change removes what seems to be unused feature kernel.
Differential Revision: https://developer.blender.org/D11828
This change makes the behavior consistent between shortcut and
option from space clip's header.
The only caveat is that the "Lock to Selection" is removed from the
Display popover. This is because it is rather hard to make operator
to render same as regular checkbox. However, shouldn't be a problem
because the setting in popover was redundant.
Differential Revision: https://developer.blender.org/D10423
The node group interface panels were still implemented in C.
Now they ported over to python for easier maintenance.
Differential Revision: https://developer.blender.org/D11834
In addition to _object_ animation, now _object data_ (mesh, curve, ...)
animation can now be made single user as well.
This came up in T89369 and while it is possible to do this via the
Outliner [where all actions have to be selected individually], this
seems to be more convenient to be done from the 3DView.
note: usercount of the action is checked now, if it single-user already,
no copy takes place (same thing could/should be done for
single_object_action_users as well).
note2: obdata is made single user as well (otherwise duplicated actions
will be assigned to the same shared obdata - which does not result in
unique animadata which is what we are after here)
ref. T89369
Maniphest Tasks: T89369
Differential Revision: https://developer.blender.org/D11683
Previously, this did not compile in VS 2017, because
`new T(initializer_())` would try to call the copy constructor of `T`.
Now, `initializer_` will construct the `T` inplace.
Renaming compositor node in search panel "View Switch" to "Switch View"
for better consistency.
Reviewed By: dfelinto
Differential Revision: https://developer.blender.org/D11717
Using the "Camera Fit Frame to Selected" operator didn't work for Grease Pencil
objects. The same issue caused grease pencil preview thumbnails to be useless
(e.g. when using "Mark Asset" on a Grease Pencil object).
Reason was that there was no logic to handle grease pencil data and its strokes
for the object display-point iterators used for the "Frame Selected" logic.
Addresses T89656.
Reviewed by: Antonio Vazquez, Campbell Barton
Differential Revision: https://developer.blender.org/D11833
The original assumption that the `modifyMesh` function is only
called when the modifier is applied was wrong. There are still a
couple of other places calling it through `BKE_modifier_modify_mesh`.
Now there is an extra check that makes sure instances are only
realized when the modifier is actually applied.
The backdrop image gizmo was not following the backdrop image, it
needs to be refreshed whenever the view changes. The region init
callback is executed whenever the region size changes, so that should be
a reliable place to do that.
Reported as part of T87591.
In a collapsed hierarchy, some type of data are listed as one icon per
item (2.79 did this for all data),
others are 'compacted' as a single icon with a counter (also indicating
if the active item is down that collapsed hierarchy) from 2.80 on.
Not quite sure if {rB92dfc8f2673e} was meant to do this (if it was, this
was not working though because relevant code would only get executed for
object hierarchies it seems), so now this is done for bones as well.
Fixes T88413.
Maniphest Tasks: T88413
Differential Revision: https://developer.blender.org/D11404
Walk rotate speed for tablets was being modified at runtime by scaling
the user preference mouse_speed by a constant factor; this consolidates
scaling into the the compile time tablet scale factor in walkApply.
No change in behavior.
When renaming an ID somewhere in the UI after marking it as asset, it would
often get lost in the Asset Browser (scrolled out of view). It would also get
deactivated.
This patch makes sure that if an asset is active whose ID gets renamed, it is
kept active and visible. That is important for a fast, uninterrupted asset
creation workflow, where users often rename assets while working in the asset
browser.
Old code stored the new file-name to identify a file after re-reading the
file-list after the rename. For assets that doesn't work because there may be
multiple assets with the same name. Here the simple solution of just storing
the pointer to the renamed ID is chosen, rather than relying on the file-name
in this case. (Should be fine with undo, since the ID * reference is short
lived, it's not stored over possible undo steps. If it turns out to have
issues, I rather switch to a rename_id_uuid, but keep that separate from the
file->uid).
Reviewed by: Sybren Stüvel
Differential Revision: https://developer.blender.org/D11119
TBB includes in windows.h which will by
default define min/max macro's by default,
which collide with stl's min/mac functions.
this change instructs windows.h not to
add the offending macros
(Note: This is an alternative version for D9994 by @Schiette. The commit
message is based on his description.)
Currently, when a new directory is created it is not selected.
Similarly, when renaming an existing file or directory, it does not
remain active/highlighted blue after renaming.
This change makes sure the file or directory is always selected after
renaming, even if the renaming failed or was cancelled.
This has some usability advantages:
- Open the newly created directory without having to select it (ENTER).
- If you make a naming mistake, you can immediately fix that (F2)
without having to click it again.
- If you create a directory and forget to name it, you can fix that
(F2) without having to select it.
- This is consistent with many common File Browsers.
Further, selecting the item even after renaming failed or was cancelled
helps keeping the file in focus, so the user doesn't have to look for it
(especially if the renaming just failed which the user may not notice).
In other words, it avoids disorienting the user.
Also see D11119 which requires this behavior.
We could also always select the file/directory on mouse press. This
would make some hacks unnecessary, but may have further implications. I
think eventually that's what we should do though.
`filesel.c` seems like the place that should contain file selection
functions. Previously it was in `file_ops.c` because that was the only
file that actually used it. But a followup commit needs it from a
different file.
Many ui features for geometry nodes need access to information generated
during evaluation:
* Node warnings.
* Attribute search.
* Viewer node.
* Socket inspection (not in master yet).
The way we logged the required information before had some disadvantages:
* Viewer node used a completely separate system from node warnings and
attribute search.
* Most of the context of logged information is lost when e.g. the same node
group is used multiple times.
* A global lock was needed every time something is logged.
This new implementation solves these problems:
* All four mentioned ui features use the same underlying logging system.
* All context information for logged values is kept intact.
* Every thread has its own local logger. The logged informatiton is combined
in the end.
Differential Revision: https://developer.blender.org/D11785
The geometry nodes modifier uses id properties for the inputs to node groups.
That is because the set of properties changes depending on which geometry
node group is selected.
The animation was not updated correctly because the `ANIMATION_EVAL`
depsgraph node was not evaluated, because nothing depended on it in the
depsgraph. This patch makes sure that the proper link to the geometry
component is inserted.
Differential Revision: https://developer.blender.org/D11831
This issue happened because of some miscommunication during the original
patch review. Since we have the parent element in other outliner modes
(Blender File, Data API) I was on the fence here. Rolling this back now
so that when Show All View Layers is off we don't see the current View
Layer top element.
The fix is simple, but it was better to format the code around to
follow the style in this file.
Differential Revision: https://developer.blender.org/D11830
Rename the mesh circle to "Mesh Circle", mesh line to "Mesh Line",
and mesh subdivide to "Mesh Subdivide". Previously they looked exactly
the same in the search menu, and the nodes themselves had the same
label. This is a "deep" rename that also renames internal defines and
function names to match the UI.
This node is quite similar to the curve to points node, but creates
points for only the start and end of each spline. This is a separate
node because the sampling from the curve to points node don't apply,
and just for ease of use.
All attributes from the curves are copied, including the data for
instancing: tangents, normals, and the derived rotations. One simple
use case is to make round caps on curves by instancinghalves of a
sphere on each end of the splines.
Differential Revision: https://developer.blender.org/D11719
DNA parsing assumed any identifier which starts with
(`struct`, `unsigned`, `const`) was that identifier.
So a struct called `constTest foo;` would be parsed as `est foo;`.
Add utility function to check identifiers are not
part of a larger identifier.
This also supports skipping these identifiers in any order.
Reviewed By: LazyDodo
Ref D11837
The curve resample node neglected to copy attributes to single point
result splines. That could have caused errors if some of the splines
in the result had only one point but others had more.
Use "Snap Playhead to Strips" option to enable playhead snapping.
Change behavior of CTRL key to invert snapping similar to transform operator.
Currently this option is disabled by default. It makes editing quite unpleasant
for me personally, but ideally I should gather feedback from more users.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D11745
This field was used to reference "parent" meta strips in `sequences_all`
RNA collection iterator functions.
Use `SeqIterator` wrapped in `BLI_Iterator` to iterate over elements.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11793
Work scheduler needed initialization and execution models are
not created during constant folding. This moves work execution
method to execution system.
This patch horizontally centers the text inside the progress bar
widget. It is currently left-aligned and offset to the middle, which
doesn't center properly.
see D11205 for details and examples.
Differential Revision: https://developer.blender.org/D11205
Reviewed by Julian Eisel
The menu lists all socket types that are valid for the node tree.
Changing a socket type updates all instances of the group and keeps
existing links to the socket.
If changing the socket type leads to incorrect node connections the
links are flagged as invalid (red) and ignored but not removed. This is
so users don't lose information and can then fix resulting issues.
For example: Changing a Color socket to a Shader socket can cause an
invalid Shader-to-Color connection.
Implementation details:
The new `NODE_OT_tree_socket_change_type` operator uses the generic
`rna_node_socket_type_itemf` function to list all eligible socket types.
It uses the tree type's `valid_socket_type` callback to test for valid
types. In addition it also checks the subtype, because multiple RNA
types are registered for the same base type. The `valid_socket_type`
callback has been modified slightly to accept full socket types instead
of just the base type enum, so that custom (python) socket types can be
used by this operator.
The `nodeModifySocketType` function is now called when group nodes
encounter a socket type mismatch, instead of replacing the socket
entirely. This ensures that links are kept to/from group nodes as well
as group input/output nodes. The `nodeModifySocketType` function now
also takes a full `bNodeSocketType` instead of just the base and subtype
enum (a shortcut `nodeModifySocketTypeStatic` exists for when only
static types are used).
Differential Revision: https://developer.blender.org/D10912
The wayland support requires the following development packages:
libwayland-dev, wayland-protocols, libegl-dev, libxkbcommon-dev,
libdbus-1-dev, linux-libc-dev
Partially revert 7fc220517f, as it
introduced two issues:
- Deleting keys without active keying set was no longer possible, and
- there was no more confirmation popup.
Pressing {key Alt I} in the 3D Viewport now executes
`ANIM_OT_keyframe_delete_v3d`, adjusted to suit both T88068 and T89592:
- If there is an active keying set, delete keys according to that keying
set.
- Otherwise, behave as `ANIM_OT_keyframe_delete_v3d` did before, that
is, delete all keyframes of the selected object and in pose-mode also
of selected bones.
Remove duplicate code from the `ANIM_OT_keyframe_delete` operator. The
actions of the removed code are already performed by the preceding
`keyingset_get_from_op_with_error()` call.
No functional changes.
Graphs are usually large, needing a lot of horizontal scrolling and
they can include more information for debugging.
This patch makes graph more compact horizontally by splitting
labels in lines and removing namespaces.
Furthermore it adds following information:
- Operation ID.
- SetValueOperation float value.
- Optionally, operation node name.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11720
Currently there is no clear way to know if an operation is constant
(i.e. when all rendered pixels have same values). Operations may
need to get constant input values before rendering to determine
their resolution or areas of interest. This is the case of scale, rotate
and translate operations. Only "set operations" are known as
constant but many more are constant when all their inputs are so.
Such cases can be optimized by only rendering one pixel.
Current solution for tiled implementation is to get first pixel
from input. This works for root execution groups, others
need previous groups to be rendered.
On full frame implementation this is not possible, because buffers
are created on rendering to reduce peak memory and there is
no per pixel calls.
This patch evaluates all operations that are constant into primitive
operations (Value/Vector/Color) before determining resolutions.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11490
ld: warning: could not create compact unwind for _ff_rl_init_vlc: stack
subq instruction is too different from dwarf stack size
Similar to rB2de5de57c58521862e0fecc95fc474ea347b7468
Differential Revision: https://developer.blender.org/D11796
Note that this name is essentially never used anywhere, besides as 'information'
mostly accessible from python console. Those embedded IDs are not in Main, so they
are not accessible by name ever, and mostly unusable from animation perspective
(either drivers or fcurves).
Therefore, no breakage is expected in user scripts or addons, nor when
loading in older versions of Blender.
Reviewed By: dfelinto, brecht
Differential Revision: https://developer.blender.org/D11812
During initialization of the platform a debug message is generated and
interpreted by de callback. Here the platform is checked what requires
an initialized platform.
Fixed by giving the platform check less priority in the check.
This option will determine visibility on either render or the viewport
visibility. Same for modifer settings. So it will either evaluate the
depsgrah with DAG_EVAL_RENDER or DAG_EVAL_VIEWPORT.
This not only makes it more flexible, it is also a lot
clearer which visibility / modfier setting is taken into account (up
until now, this was always considered to be DAG_EVAL_RENDER)
This option was always present in the USD exporter, this just brings
Alembic in line with that.
ref. T89594
Maniphest Tasks: T89594
Differential Revision: https://developer.blender.org/D11820
When introduced in {rB61050f75b13e} this was actually working (meaning
it checked the Outliner OB_RESTRICT_RENDER flag and skipped the object if
desired).
Behavior has since then been commented in rBae6e9401abb7 and apparently
refactored out in rB2917df21adc8.
If checked, it seemed to be working (objects marked non-renderable in
the Outliner were pruned from the export), however unchecking that
option did not include them in the export.
Now it changed - for the worse if you like - in rBa95f86359673 which
made it so if "Renderable Objects" only is checked, it will still export
objects invisible in renders. So since we now have the non-functional
option with a broken/misleading default, it is better to just remove it
entirely.
In fact it has been superseeded by the "Visible Objects" option (this
does the same thing: depsgraph is evaluated in render mode) and as a
second step (and to make this even clearer) a choice whether
Render or Viewport evaluation is used can be added (just like the USD
exporter has). When that choice is explicit, it's also clear which
visibility actually matters.
This is breaking API usage, should be in release notes.
ref. T89594
Maniphest Tasks: T89594
Differential Revision: https://developer.blender.org/D11808
From patch D11780 from Erik Abrahamsson.
It parallelizes making the vertices, destruction of map entries,
finding if the result is PWN, finding triangle adjacencies,
and finding the ambient cell.
The latter needs a parallel_reduce from tbb, so added one into
BLI_task.hh so that if WITH_TBB is false, the code will still work.
On Erik's 6-core machine, the elapsed time went from 17.5s to 11.8s
(33% faster) on an intersection of two spheres with 3.1M faces.
On Howard's 24-core machine, the elapsed time went from 18.7s to 10.8s
for the same test.
Adds full frame implementation to this node operations.
No functional changes.
1.3x faster than tiled fallback.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11764
Adds full frame implementation to this node operation.
No functional changes.
1.4x faster than tiled fallback.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11765
Adds full frame implementation to this node operation.
No functional changes.
1.7x faster than tiled fallback.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11766
Adds full frame implementation to this node operation.
No functional changes.
1.5x faster than tiled fallback.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11767
Also replace integer with bool in Ghost API when only used as boolean,
and uint8* with char* in Ghost API when variable is a string.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D11617
Signed-off-by: Nicholas Rishel <rishel.nick@gmail.com>
This node creates a poly spline line in one of 2 modes:
- Line between two points
- Start Point, Direction, and Length
Both modes create splines with only start and endpoints.
A resample node can be used afterward to increase the point count.
Differential Revision: https://developer.blender.org/D11769
This patch adds a very simple node that explicitly converts a float to
an int. While this may seem redundant, it would offer 2 benefits to the
current requirement to use implicit float conversions:
1. It makes the node tree's intent more clear and self-documenting
(especially if changes in the future require integer inputs).
2. It eliminates undefined behavior in current/future nodes from float
inputs by guaranteeing that the input is an integer.
The node offers a variety of rounding techniques to make it more flexible.
Differential Revision: https://developer.blender.org/D11700
This would prevent loading a parent that would only be referenced by
children during a linking operation.
Looks like this missing bit of code has been there since the stone ages,
it is fairly baffling to find that such critical low-levels mistakes can
survive decades in a codebase...
Note that such fully-indirectly linked parent object is not instantiated
in scene currently, this is fairly bad I think, but kind of a different
issue.
This patch extends D11695 to provide full support for Chinese and Korean
input on macOS.
Chinese input notes:
You can input symbolic characters (such as '! , '$') during Chinese input.
The difference from Japanese input is that multiple `insertText` may be
called with a single key down (`keyDown` method). This happens when you input
a symbolic character (such as '! , '$') during conversion.
The conversion is confirmed (`insertText`) and the symbolic character is
entered (`insertText`). To solve this problem, I have `result_text` to
concatenate the strings and store them in `result`.
Korean input notes:
Korean does not display a conversion suggestion window.
Like Chinese, Korean input may call multiple `insertText` methods. Also,
in Korean, the previous confirmation (`setMarkedText` and `insertText`) and
the next conversion is processed (`setMarkedText`) may be called
simultaneously with a single key down (`keyDown` method).
For example:
1. press g ㅎ (`setMarkedText`)
2. press k 하 (`setMarkedText`)
3. press t 앗 (`setMarkedText`)
4. press k 하세 (`setMarkedText`, `insertText`, `setMarkedText`)
Fixed so that the `insertText` and the last `setMarkedText` are processed.
Also, if a control character (such as Arrow, Enter) is input during Korean
input, the conversion will be confirmed (`setMarkedText`, `insertText`) and
the original control character will be processed.
In other words, if you press the left arrow key while typing in Korean, the
cursor will move to the left after the character is confirmed. Therefore, I
modified the `keyDown` method so that the `handleKeyEvent` is called again
after the `insertText` is processed in the `interpretKeyEvents` method.
Differential Revision: https://developer.blender.org/D11699
Blender did not support to input East Asian characters (Chinese, Japanese,
Korean) on macOS. This patch adds support for Japanese input, by implementing
the appropriate processing for the NSTextInputClient protocol.
Technical notes:
* The conversion candidate window is drawn by the input method program calling
`firstRectForCharacterRange`.
* The string before confirmation (called `composite` in blender) is handled in
the `setMarkedText` method called by the input method program.
* The string after confirmation (called `result` in the blender) is processed
in the `insertText` method called by the input method program.
Ref T51283
Differential Revision: https://developer.blender.org/D11695
IME conversion candidate window was displayed at the mouse position, instead of
below the cursor or text selection.
Blender need to tell the input method program where the conversion candidate
window is during Japanese and Chinese input.
In macOS, the `firstRectforCharacterRange` is called when input by the input
method starts, and the position of the conversion candidate window is
specified. Therefore, it is necessary to set the position of the conversion
candidate window before input starts. This patch changes it so that the position
of the conversion candidate window is always set when the cursor is drawn.
Differential Revision: https://developer.blender.org/D11697
File Browser code uses the term "params" for its file selection parameters a
lot. Avoid confusion/ambiguity by calling the notifier listener parameters
"listener_params".
Went back to using Blender's polyfill for triangulation, which is much
faster (time for a 3.1M face boolean went from 103s to 48s).
Had to put in detection for the case that needs the exact triangulator
(bug T86805), and also a fix for non-convex quads (bug T89330).
Blender needs to tell the input method program where the conversion
candidate window is during Japanese and Chinese input.
In macOS, there are displays where the window size and the native pixel size
are different, so the candidate window may appear in an unnatural position.
This patch converts the cursor position x and y for matching macOS window
coordinate. On Windows, GHOST_GetNativePixelSize returns 1, so it has no effect.
Differential Revision: https://developer.blender.org/D11696
When inserting text using IME on a button, the character after the cursor is
displayed before the cursor.
This bug seems to have occurred during the refactoring in D765.
Differential Revision: https://developer.blender.org/D11072
This allows converting between different `destruct_ptr` types (which is
just a `std::unique_ptr` with a custom deleter).
The most common use case is to convert from a derived type to
the type of the base class.
These are scripts for benchmarking Blender features on real-world .blend
files. They were originally written for benchmarking Cycles performance, and
were made generic so they can be used for more Blender features.
The benchmarks can be run locally by developers. But the plan is to also run
these as part of continuous integration to track performance over time.
Currently there are tests for Cycles rendering and .blend file loading.
Documentation:
https://wiki.blender.org/wiki/Tools/Tests/Performance
Main features:
* User created configurations to quickly run, re-run and analyze a selected
subset of tests.
* Supports both benchmarking with existing builds, and automatic building of
specified git commits, tags and branches.
* Generate HTML page with bar and line graphs from test results.
* Controlled using simple command line tool.
* For writing tests, convenient abstraction to run a Python function in Blender
with arguments and return value.
Ref T74730
Differential Revision: https://developer.blender.org/D11662
This adds a viewer node similar to the one in the compositor.
The icon in the headers of nodes is removed because it served
the same purpose and is not necessary anymore.
Node outputs can be connected to the active viewer using
ctrl+shift+LMB, just like in the compositor. Right now this collides
with the shortcut used in the node wrangler addon, which will
be changed separately.
As of now, the viewed geometry is only visible in the spreadsheet.
Viewport visualization will be added separately.
There are a couple of benefits of using a viewer node compared
to the old approach with the icon in the node header:
* Better support for nodes that have more than one geometry output.
* It's more consistent with the compositor.
* If attributes become decoupled from geometry in the future,
the viewer can have a separate input for the attribute to visualize.
* The viewer node could potentially have visualization settings.
* Allows to keep "visualization points" around by having multiple
viewer nodes.
* Less visual clutter in node headers.
Differential Revision: https://developer.blender.org/D11470
Using BMesh operators through the edit-mesh API created a full copy
of the mesh so it was possible to restore the mesh in case
one of the operators raised an error.
Remove support for automatic backup/restore from the EDBM_op_* API's
as it adds significant overhead and was rarely used.
Operators that need this can use the BMBackup API to backup & restore
the mesh in case of failure.
Add warning levels to BMO_error_raise so operators can report problems
without it being interpreted as a request to cancel the operation.
For high-poly meshes creating and freeing a full copy is an expensive
operation, removing this gives a speedup of ~1.77x for most operators
except for "connect_verts" / "connect_vert_pair"
which still uses this functionality.
Previously, any face groups that could not be merged into a face
caused the entire operation to report an error and do nothing.
Now these cases are skipped over, dissolving faces where possible.
- Only create arrays with groups of two or more faces.
- Remove raising exception for zero length arrays.
- Remove redundant exception check (assert there is no exception).
- Use a struct for face array & it's length instead of a NULL
terminated array (removes the need to count faces in a loop).
- Replace '[mce]' with "Mike Erwin".
- Remove references to turn-table author as it isn't useful information,
the author was credited in the commit message.
Now, The weight is used in the randomize parameters of the offset modifier.
This is useful to generate effects like explosions.
Related to the new Vertex Weight modifiers.
Addresses T76003. When using VR with Eevee and viewport denoising,
scene geometry could sometimes be occluded for one eye. Solution was,
as Clement suggested, to use a separate GPUViewport/GPUOffscreen for
each VR view instead of reusing a single one for rendering.
A point of confusion about this node is that it doesn't work on the
output of the mesh circle primitive node. This patch adds a warning to
help with that. This avoids adding a warning when the geometry set
input has no mesh.
Differential Revision: https://developer.blender.org/D11771
As noted in a comment now, these functions only update a cache, so they
don't change the logical state of the mesh, which is "it will have the
data when necessary." Using a const argument will help const correctness
when accessing an object's evaluated mesh.
This code was written for the File Browser together with the Asset Engine
design, that is not part of the Asset Browser/System design anymore. Updated
comments accordingly.
`FileDirEntryRevision` was actually used, but I removed it and moved the used
members to the parent `FileDirEntry`, since there is no concept of revisions
currently.
There should be no functional changes.
Add a new transformation space choice for bone constraints, which
represent the local transformation of the target bone in the constraint
owner's local space.
The use case for this is transferring the local (i.e. excluding the
effect of parents) motion of one bone to another one, while ignoring
the difference between their rest pose orientations.
The new option replaces the following setup:
* A `child` bone of the `target`, rotated the same as `owner` in rest pose.
* A `sibling` bone of the `target`, positioned same as `child` in rest
pose and using Copy Transforms in World Space from `child`.
* The `owner` bone constraint uses Local Space of `sibling`.
(This analogy applies provided both bones use Local Location)
Differential Revision: https://developer.blender.org/D9493
This constraint can be naturally viewed as a prototype for a future
4x4 matrix math node (or subset thereof), since its basic semantics
already is matrix assignment. Thus it makes sense to add math options
to this constraint to increase flexibility in the meantime.
This patch adds support for several operations that would be useful:
- An option to remove shear in the incoming target matrix.
Shear is known to cause issues for various mathematical operations,
so an option to remove it at key points is useful.
Constraints based on Euler like Copy Rotation and Limit Rotation
already have always enabled shear removal built in, because their
math doesn't work correctly with shear.
In the future node system shear removal would be a separate node
(and currently Limit Rotation can be used as a Remove Shear constraint).
However removing shear from the result of the target space conversion
before mixing (similar to Copy Rotation) has to be built into
Copy Transforms itself as an option.
- More ways to combine the target and owner matrices.
Similar to multiple Inherit Scale modes for parenting, there are
multiple ways one may want to combine matrices based on context.
This implements 3 variants for each of the Before/After modes
(one of them already existing).
- Full implements regular matrix multiplication as the most basic
option. The downside is the risk of creating shear.
- Aligned emulates the 'anti-shear' Aligned Inherit Scale mode,
and basically uses Full for location, and Split for rotation/scale.
(This choice already existed.)
- Split Channels combines location, rotation and scale separately.
Looking at D7547 there is demand for Split Channels in some cases,
so I think it makes sense to include it in Copy Transforms too, so that
the Mix menu items can be identical for it and the Action constraint.
Differential Revision: https://developer.blender.org/D9469
To some degree these are changes in preparation of further Asset Browser
related changes, see D11119. But also, the current UUID design was written for
the old Asset Engine design, which isn't part of the current Asset
Browser/System design anymore.
And lastly, "UUID" are a well established standard
(https://en.wikipedia.org/wiki/Universally_unique_identifier) which this
implementation didn't follow. What we have here is more of an index, or a
unique identifier (https://en.wikipedia.org/wiki/Unique_identifier).
So this does the following changes:
* Renames "UUID" to "UID"
* Changes the type of the UID to (a typedef'ed) `uint32_t`, which is more than
enough for our current asset system design and simplifies things.
* Due to the new type, we can avoid allocations for hash-table storage.
* Add/use functions for UID handling
Note that I am working on a major rewrite of the file-list code. Meanwhile we
want to keep things sensible.
his new modifier allows to generate weights base on:
* Angle of the stroke relative to object or world orientation. For example, if the value is 90, the maximum weights will be for vertical lines and minimum for horizontal lines.
* Distance to Target object. The distance calculated is normalized to get valid weights between 0 and 1.0.
The weights are created in an existing vertex group and the data can be replaced or mixed with the existing value to combine different weight effects. The minimum parameter, allows to define the minimum weight generated. This is useful to avoid very low weights.
The generated weights can be used in any modifier. For example, the angle weight value can be used to mimic FreeStyle Caligraphy modifier using the weight with the thickness modifier.
Also some modifier has been changed to inlude a new option to use the weights as factor of the effect.
As result of this change, the fading option has been removed from Thickness and Opacity modifiers because this can be done using the new modifier, it's not logic to repeat the same.
Reviewed By: mendio, filedescriptor
Differential Revision: https://developer.blender.org/D11604
Adds haptic settings to float (button) actions that can be used to
apply haptics when an action is active. Users can configure the
duration, frequency, and amplitude of the feedback as well as when
it will be applied (press, release, press/release, or repeat).
The haptic output path/target is specified via the name of an
existing action of type "haptic". This allows float actions to target
the same output paths without the need for multiple haptic actions.
Generally the evaluated mesh should not be changed, since that is the
job of the modifier stack. Current code is far from const correct in
that regard. This commit uses a const variable for the reult of
`BKE_object_get_evaluated_mesh` in some cases. The most common
remaining case is retrieving a BVH tree from the mesh.
In the Win32 platform our setTitle() can properly assign a Unicode
utf-8 window title. Unfortunately our getTitle() will only read regular
8-bit character strings. This means that we can never compare what we
set to what we get. This patch updates getTitle() to use Unicode-aware
GetWindowTextLengthW and GetWindowTextW.
see T88909 for an example of this affecting user experience.
Differential Revision: https://developer.blender.org/D11782
Reviewed by Ray Molenkamp
Handle width calculation was incorrect in drawing code. This caused
handles to be invisible when zoomed out.
After fixing math, handles become too large, so now they are constrained
to quarter of strip width, which feels more natural and represents
clickable area more closely.
`sequence_handle_size_get_clamped()` did not return size in pixels, but
in 2D-View space, this comment was corrected.
SeqCollection wasn't freed.
It wasn't easy to find culprit so added argument to
SEQ_collection_create() to pass function name.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11746
Address initial feedback:
- Use checkboxes instead of radio buttons
- Hide snapping distance control from UI
- Tweak snapping line color - use selected strip color, 50% transparency. Similar to other editors
- Draw 2px thick line, since strip outline is also 2px thick
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D11759
When multiple File or Asset Browsers would load at once (e.g. when loading a
file with two File Browsers open) and they would load multiple directories or
.blend files (using the Recursions option in the File Browser or loading an
asset library with multiple .blends), often only one File/Asset Browser would
correctly load all files. Others would be incomplete or entirely empty. That
was because of a race condition, where the directories or .blend files would be
loaded concurrently and the first one that finished would cancel the other
ones. This again happened because they used the job system with the same
"owner", which by design makes all jobs with the same owner cancel as soon as
the first is finished.
Address this by making sure they have different owners. That is, not the scene
anymore, but the filelist the job belongs to. Doesn't make much sense to use
the scene as owner for scene-unrelated file loading anyway.
Steps to reproduce were:
* Open two File Browsers as regular editors.
* In the Display Settings popover, set "Recursions" to 2 or 3 levels.
* Navigate to a directory with plenty of subdirectories in both File Browsers.
* Save the file.
* Reload the file, one of the File Browsers likely has an incomplete file list.
Alternatively, use Asset Browsers and open an asset library containing multiple
.blends.
This patch writes the timecode in the .srt file relative to the start
frame of the scene. If the timecode is global but scene does not start
at frame 0 the subtitles don't match if they get loaded in an external
video player. Muted strips will be ignored. Don't allow negative
timecodes in .srt.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11762
The error codes could be used to look up messages from a table
of messages however this wasn't especially useful.
Now all calls to BMO_error_raise must inclue a message.
Edit-mesh partial update logic assumed translate didn't need normals
to be recalculated (for faces with all vertices being transformed).
However translate can optionally rotate which requires
all transformed normals to be updated.
Check for this case and use the previous partial-update method
when it modified extra geometry, so the normals are properly reset.
Further updates need not recalculate them.
Supporting both object & edit-mode is more involved.
Both cases are now supported with object mode tracking the last-used
state for rotation so it's only reset once when rotation is disabled.
Normals now includes many functions including normal splitting &
custom normal manipulation split this into it's own file
to centralize related functions.
This node has two modes: the first mode computes a circle from three
locations and a resolution. The second takes radius and resolution.
The first mode also outputs the center of the computed circle as
a vector.
Differential Revision: https://developer.blender.org/D11650
This changes `UI_but_func_tooltip_set` so that it allows passing a custom free function, which has two benefits:
* The caller can pass `null` to indicate that the value should not be freed.
* Arbitrary c++ data can be passed to the callback (before the struct had to be trivially destructible).
I added `uiFreeArgFunc` and used it in other places where appropriate.
Differential Revision: https://developer.blender.org/D11738
Caused by {rBfba9cd019f21}.
Above commit reordered toolsettings snapping flags but missed remapping
these for the UV toolsettings in versioning code.
Differential Revision: https://developer.blender.org/D11756
Multi-threading support for transform modes: bevel-weight, crease,
push-pull, rotate, shear, shrink-fatten, skin-resize, to-sphere,
trackball & translate.
This is done using a parallel loop over transform data.
From testing a 1.5million polygon mesh on a 32 core system
the overall performance gains were between ~20-28%
To ensure the code is thread-safe arguments to shared data are const.
Reviewed By: mano-wii
Creates a Curve with 1 Bezier Spline from four positions (start,
start handle, end handle, end) and a resolution. The handles are
aligned and mirrored automatically. An "Offset" mode is also included
to allow specifying the handles relative to the control points.
The default settings recreate the existing default Bezier Curve in the
3D viewport add menu.
Differential Revision: https://developer.blender.org/D11648
Reserve the term count for values that require calculation
(typically linked lists).
Without this convention it's difficult to know if using a length
accessor function in a loop will be O(N^2) without inspecting the
underlying implementation.
This patch is for a node that creates a poly spline from a
3 point quadratic Bezier. Resolution is also specified.
Curve primitives design task: T89220
Differential Revision: https://developer.blender.org/D11649
This node creates a curve spline and gives control for the number of
rotations, the number of points per rotation, start and end radius,
height, and direction. The "Reverse" input produces a visual change,
it doesn't just change the order of the control points.
Differential Revision: https://developer.blender.org/D11609
This patch adds a Curve Primitives menu in Geometry nodes with an
initial entry of a star primitive.
The node is a basic star pattern node that outputs a poly spline.
Options control the inner and outer radius, the number of points,
and the twist of the valleys.
Differential Revision: https://developer.blender.org/D11653
Change snapping behavior to snap strip edges when they are close to snap point.
Default behavior is, that each transformed strip is snapped to any other strip.
Implement snapping controls in sequencer tool settings. These controls include:
- Snapping on/off
- Ability to snap to playhead and strip hold offset points
- Filter snap points by excluding sound or muted strips
- Control snapping distance
Snapping controls are placed in timeline header similar to 3D viewport
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11646
When using multiple monitors that differ in scale and/or dpi, the
varying sizes of the window titles and borders can cause the placement
of those windows to be out by a small amount. This patch adjusts for
those differences on Windows 10 and newer.
see D10863 for details and examples.
Differential Revision: https://developer.blender.org/D10863
Reviewed by Ray Molenkamp
`UILayout.operator_menu_enum()` now returns the operator properties, just like
`UILayout.operator()`. This makes it possible to set options for the operator
displayed in the menu. In C it can be done through the new
`uiItemMenuEnumFullO()` or `uiItemMenuEnumFullO_ptr()`.
It's reasonable to have this, probably just a small thing never bothered to
add. D10912 could use it, the following comment can be addressed now too:
https://developer.blender.org/diffusion/B/browse/master/source/blender/editors/space_nla/nla_buttons.c$583-586
This is just some cleanup of the Win32 window creation code. After
CreateWindowExW() this patch uses some early exits to replace some
potentially confusing if blocks. No functional changes.
Differential Revision: https://developer.blender.org/D11446
Reviewed by Ray Molenkamp
When compiling BSDF nodes, we only assing stack space to the normal and
tangent inputs if they are linked. However, it could be that the
ConstantFolder removed the link, so checking if there is a link fails
to take this into account.
To fix this, added a flag to ShaderInput to keep track of whether a
constant was folded into the input, and use it as well to verify that
the socket is linked when assigning stack space.
Reviewed By: brecht
Maniphest Tasks: T70615
Differential Revision: https://developer.blender.org/D11731
Mask value works just like transparency mask.
You are able to select intersection lines inside a
collection or, between collections.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D11309
Removed in b787581c9c as it's comment
noted it was bad code, the reason for it's necessity was no longer valid.
Add this back with comment explaining why it's still needed.
Use const arguments to simplify further optimizations.
Transforming elements shouldn't need to change their containers
data-structures.
ElementResize for grease pencil stroke thickness was
modifying TransInfo.num & TransInfo.values_final.
Now copies are operated on to preserve const correctness although
it's worth investigating if this can be avoided altogether.
- Added functions to check if the cursor is at a number.
- Added function to parse a number.
- Joined skip_separator functions.
- Added function to check if cursor is at any given set of characters.
AMD Drivers didn't report an additional space in the rendered. This made
testing for the HQ workaround fail and the issue appeared back on
certain cards.
This fix will test with surrounding spaces or if the renderer name
endswith the given string. If any of these are the case the hq normals
workaround will be enabled.
Fixing small typo of word "multi" in function identifier by renaming
"count_mutli_input_socket_links" to "count_multi_input_socket_links"
Differential Revision: https://developer.blender.org/D11732
Reviewed by Hans Goudey
This commit avoids duplicating the deformed control point
list twice by modifying the list in the object curve cache directly.
For curves, the original control point data was duplicated into a
local listbase, deformed, used to create the "bevel list" data, and
then duplicated again for the object-level storage of deformed
control points. Text objects and surface objects had a similar
unnecessary duplication.
The curve bevel list was freed, and then freed again in a call to the
function that recalulates it. The curve "anim path" data was freed
only to be freed again in its calculation function as well. Also move
the anim_path calculation directly after the bevel list creation to
make its requirements more explicit.
Surface objects were already handled by an early return in the main
"curve types" function. This commit splits them, renames the funtions
to match (and be more consistent with other names), and sanitizes the
checking of object types.
Every call to `BKE_displist_make_curveTypes` already checks the object
type beforehand, there is no need to check it again. Also removed an
outdated comment.
`BKE_displist_make_curveTypes` had a `for_orco` argument that was
always false in calls to the function. Removing it allows the curve
displist and modifier evaluation code to become simpler. There are
some related cleanups in rBdf4299465279 and rB93aecd2b8107.
Sometimes the current spline list isn't part of the original curve, like
when using the deformed control points, etc. This will be helpful in
the curve modifier stack.
While the const correctness of `ListBase` is quite limited, it's helpful
to have a way to retrieve the `Nurb` list from curve object data without
casting away const from the curve.
There is no longer a need to resize windows that are _already_ open,
since temporary windows can no longer take over the space used by other
already-open temporary windows. This primarily affects Preferences and
Render windows.
see D11721 for more details.
Differential Revision: https://developer.blender.org/D11721
Reviewed by Julian Eisel
Likely uncovered by 6c97c7f767, the actual mistake would be from
6942dd9f49.
The hacks to display text buttons for renaming in UI-Lists used the emboss of
the text button for handling logic. It relied on the emboss `NONE` but we also
introduced `NONE_OR_STATUS` with 6942dd9f49. Both values need to be treated
equally for the logic of this hack to work.
The change in `interface_layout.c` is actually not needed for this exact issue,
but it's the correct thing to do. There may actually be more cases where `NONE`
and `NONE_OR_STATUS` need to be treated equally. Something to be checked still.
Custom properties defined on objects are not accessible from the
attribute node when rendering a volume in Cycles. This is because
this case is not handled.
To handle it, added a primitive type for volumes in the kernel,
which is then used in the initialization of ShaderData and to
check whether an attribute lookup is for a volume.
`volume_attribute_float4` is also now checking the attribute
element type to dispatch to the right lookup function.
Reviewed By: #cycles, brecht
Maniphest Tasks: T87194
Differential Revision: https://developer.blender.org/D11728
Weird 'embedded for overrides' flag of embedded IDs (including ShapeKeys
in override context) was not properly cleaned up when making an override
fully local.
Reported by studio, thanks.
@jbakker should be backported to 2.93LTS if possible.
In ViewLayer view, overrides of excluded collections would then show one
level higher, due to bad handling of those excluded collection in draw
code.
Reported by studio, thanks.
@jbakker should be backported to 2.93LTS.
Passing `emboss=False`set `UI_EMBOSS_NONE` in the layout, which
completely disables button background colors for things like animation
state. This commit changes that to `UI_EMBOSS_NONE_OR_STATUS`,
which effectively restores the behavior to what it was prior to the
addition of that flag, with the added option to completely disable
the status emboss with `UI_EMBOSS_NONE`.
This adds a new Attributes panel in the mesh properties editor.
It shows a list of all the generic attributes on the mesh.
In the future, we want to show built-in and other attributes in the
list as well. Related technical design tasks: T88460, T89054.
There is also a new simple name collision check that warns the user
when there are multiple attributes with the same name. This can be
problematic when the attribute is supposed to be used in geometry
nodes or during rendering.
Differential Revision: https://developer.blender.org/D11276
This was a stupid mistake in my original commit that added this item.
While this is an API breakage, the name is simply wrong, and it is only
6 months old, and slightly niche.
Differential Revision: https://developer.blender.org/D11701
This patch adds a function where you can specify occlusion effectiveness from 0 to 255 layers per face for a given mesh material.
Reviewed By: Sebastian Parborg (zeddb)
Ref D11308
Offset rays from the flat surface to match where they would be for a smooth
surface as specified by the normals. In the shading panel there is now a
Shading Offset (existing option) and Geometry Offset (new).
The Geometry Offset works as follows:
* 0: disabled
* 0.001: only terminated triangles (normal points to the light, geometry
doesn't) are affected
* 0.1 (default): triangles at grazing angles are affected, and the effect
fades out
* 1: all triangles are affected
Limitations:
* The artifact is still visible in some cases, it could be that some quads
require to be treated specifically as quads.
* Inconsistent normals cause artifacts.
* If small objects cast shadows to a big low poly surface, the shadows can
appear to be in a wrong place - because the surface moved slightly above
the geometry. This can be noticed only at grazing angles to light.
* Approximated surfaces of two non-intersecting low-poly objects can overlap
that causes off-the-wall shadows.
Generally, using one or a few levels of subdivision can get rid of artifacts
faster than before.
Differential Revision: https://developer.blender.org/D11065
* Reduce code duplication.
* Give methods more standardized names (e.g. `move_to_initialized` -> `move_assign`).
* Support wrapping arbitrary C++ types, even those that e.g. are not copyable.
* Use unsigned integer types for bit operations.
* Use 64 bit integer instead of 32 bit.
* Support scoped enumes (aka `enum class`) by adding some more casts.
The crash was caused by a mistake in 5f9677fe0c
where the pointers to the custom data layers would be overwritten with the one
for the first layer, as CustomData_duplicate_referenced_layer is only about the
first layer. customData_duplicate_referenced_layer_index should be used instead
to duplicate the right layer.
Old implementation has a single parser of many different
formats. With the introduction of Vulkan this would lead
to another parser in the same function. This patch
separates the log parsing using a visitor pattern so the
log parsing can be configured per GPU backend or even
per driver.
With Vulkan we manage the compiler our self so the parsing
will become more straight forward. The OpenGL part depends
on many factors (OS, Driver) and perhaps even GPU.
This patch is part of: T87228.
Support accurate random selection for:
- CURVE_OT_select_random
- LATTICE_OT_select_random
- OBJECT_OT_select_random
Ref D11685
CollectionLineart does not care about the configurations
in master collection.
Other options are not applicaple for master collection as well.
Hence hiding it.
Reviewed by Dalai Felinto (dfelinto)
Differential Revision: https://developer.blender.org/D11702
This option allow users to see the view layer in context to the
others. It is particularly useful to see which view layers have which
collections enabled, and their render settings (holdout, ...).
This option is off by default.
Differential Revision: https://developer.blender.org/D11708
In preparation of supporting vulkan. Draw/GPU tests should use
GPU_TEST or DRAW_TEST macros. These macros will run the test
on available drawing context backends like OpenGL or Vulkan.
As in master there is only an OpenGL backend nothing changed.
The problem was an optimization I put in to triangulate quads.
It was wrong if the quad, after projecting onto a 2d plane, was
not convex. Handling quads the same as other faces fixes the bug.
Unfortunately, this will slow down Exact Boolean when the input has
many quads (the usual case, of course).
Will attempt to fix that with a later change, but for now, this
at least restores correctness.
This was disabled before since modal handlers for action operators
could receive events from other actions and exit prematurely. Now,
the XR operators check for events with the matching operator and
properties to avoid this. In addition, a list of active modal actions
is stored in the session state so that duplicate operators can be
filtered out when dispatching events.
Fixes an issue where draw callbacks were not drawn correctly if an
operator changed the navigation. Now, the navigation transforms are
saved before dispatching action events and are later used to
calculate the viewer/controller poses.
Now, the mask layers are copied and later a cleanup is done in order to verify all mask layer exist in destination object. If the layer mask does not exist, it's removed from the list.
This is related to T89234.
Skip updating normals & tessellation for contiguous geometry regions
for operations such as translate & uniform scale.
This means when all geometry is selected, no updates are needed
as the relative locations of vertices aren't being modified.
Performance:
As this is skipping a multi-threaded operation,
larger improvements are noticeable on systems with fewer cores.
- ~1.15x to ~1.3x overall gain for 32 cores.
- ~1.7x to ~2.2x overall gain for 1 core (limited using `-t 1` argument).
Details:
- Rotate & non-uniform scale only skip tessellation.
- Proportional editing and axis-mirror have special handling
ensure geometry is properly grouped before considering
a face part of a single group that can be skipped.
- Loose vertices always need their normals to be recalculated
since they're calculated based on the location.
- Non-affine transform operations such as shrink-fatten & bend,
don't take advantage of this optimization.
- Snap projection also disables the optimization.
editor dataset region always showed 0. This was caused by a conditional
statement that needed a domain to be set, which is not the case for
Instances component type.
Reviewer: Hans Goudey (Hoogly Boogly)
Differential Revision: https://developer.blender.org/D11710
This patch enables sample filtering when scaling preview images in File
Browser, improving the result a bit. Reduces blockiness and other
artifacts when enlarging the images.
see D11706 for details and examples.
Differential Revision: https://developer.blender.org/D11706
Reviewed by Julian Eisel
`t->values` does not necessarily represent a final value of the
transformation, as each mode treats this value differently.
So, unfortunately, we cannot have a generic offset solution for modal
transform operations. Offset needs to be handled by each mode.
Note: Currently only, `Move`, `Rotate` and `Resize` support this.
When baking some data, we create a new Mesh with edits and modifiers applied.
However, in some cases (e.g. when there is no modifier), the returned Mesh is
actually referencing the original one and its data layers. When autosmooth is
enabled we also split the Mesh. However, since the new Mesh is referencing the
original one, although `BKE_mesh_split_faces` is creating new vertices and edges,
the reallocation of the custom data layers is preempted because of the
reference, so adding the new vertices and edges overwrites valid data
To fix this we duplicate referenced layers before splitting the faces.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D11703
User can specify filtering options inside line art modifier,
like inverting selection and including face mark region border.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D11307
This patch adds a left aligned sidebar to the spreadsheet editor. This
Sidebar can be used to navigate the geometry component types and
attribute domains. It also provides a quick overview of domain sizes.
It replaces the two dropdowns in the regions header.
Next step will be to add the domain cycling shortcut
using the CTRL + mouse wheel.
Reviewer: Dalai Felinto (dfelinto), Julian Eisel (Severin),
Hans Goudey (HooglyBoogly).
Differential Revision: https://developer.blender.org/D11046
This patch includes: Floating edge type support,
Special chaining option for floating edge,
Chaining option for reducing jagged edges when floating
edges are involved.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D11306
* Mark either all or no class methods with override
* Don't use zero sized array since it has a different size in C and C++.
Using a little more memory here is not significant.
* Don't use deprecated mechanism to mark private GSet members in clang
just like we don't for MSVC, it warns even for simple zero initialization.
In-progress Safari download files/packages are now recognized as bundles
and therefore not treated as directories.
Differential Revision: https://developer.blender.org/D11613
This resolves a bottleneck where every update while transforming
copied the entire mesh data-block, which isn't needed as the edit-mesh
is the source of the data being edited.
Testing shows a significant overall speedup when transforming:
- ~1.5x with a subdivided cube 1.5 million vertices.
- ~3.0x with the spring mesh (edit-mode with modifiers disabled,
duplicated 10x to drop performance).
Reviewed By: sergey
Ref D11337
Avoid computationally expensive copying operations
when only some settings have been modified.
This is done by adding support for updating parameters
without tagging for copy-on-write.
Currently only mesh data blocks are supported,
other data-blocks can be added individually.
This prepares for changing values such as edit-mesh auto-smooth angle
in edit-mode without duplicating all mesh-data.
The benefit will only be seen when the user interface no longer tags
all ID's for copy on write updates.
ID_RECALC_GEOMETRY_ALL_MODES has been added to support situations
where non edit-mode geometry is modified in edit-mode.
While this isn't something user are likely to do,
Python scripts may change the underlying mesh.
Reviewed By: sergey
Ref D11377
Very stupid typo in override apply code on GP modifiers (typical
copy/paste mistake from original modifiers code).
@jbakker this should be back-ported to 2.93LTS.
This patch enables bound box check when loading geometry
into line art. Works with overscan as well. Will discard
object if its bbox completely lies in one side of the
clipping space frustum.
Reviewed by: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D11545
For scenes that have a lot of edges, this could potentially
save some time generating individual strokes that are outside
camera frustum.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D11525
682a74e090 renamed Bendy Bones properties and replaced existing float
properties with float-vector properties. This updates the property names used
by the action baking operator (`NLA_OT_bake`).
Iteration was incorrectly calling the same object. Had it called every
window it would still be unnecessary as WM_DISPLAYCHANGE is sent to all
broadcast receiving windows.
Previously the smooth shading of the voxel remesher was controlled by a
mesh property. With this change, the output will try to match the
current shading of the object. This only takes into consideration the
shading mode of the first polygon of the model, but it is probably what
most users expect as it works as intended with the shade smooth/flat
object mode options.
Reviewed By: JulienKaspar, JacquesLucke
Differential Revision: https://developer.blender.org/D11626
SCULPT_nearest_vertex_get expects a distance, not a distance squared.
This should make symmetry work as expected, but it still can fail if the
mesh topology is not completely symmetrical.
Reviewed By: JacquesLucke
Maniphest Tasks: T89221
Differential Revision: https://developer.blender.org/D11642
Adds full frame implementation to this node operations.
No functional changes.
1.2x faster than tiled fallback.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11638
Adds full frame implementation to Image node operations.
Mostly refactored into buffer utility methods for reuse in other
operations.
No functional changes.
1.8x faster than tiled fallback.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11559
When use smooth tool in a cyclic stroke, the smoothing algorithm was not using the adjacent points if these are the end or start of stroke.
Now, the smooth uses the other extreme of the stroke to compute smoothness.
This change will ensure at least one 'local' collection can host the new
'local' override of all objects (indirectly) overridden by this
operation, such that no new override of object ends up in master
collection (which can become extremely messy in production files).
In practice, it means often at least one of the linked collection owning
those objects also has to be overridden.
NOTE: This only affect cases where root overridden linked object has
some dependencies outside of its own root linked collection. While this
situation should be avoided, it cannot always be, so we try to support
it as best as we can.
This is again in the fuzzy area of how embedded IDs are handled
respectively by partial undo code and depsgraph... Should not be
necessary currently, but better be safe and explicit, and also tag
those embeded IDs from re-used owner ID.
In certain CMake configurations it was possible
that OCIO gave linker errors due to it thinking
it was using the shared library rather than the
static library we ship.
Would crash when adding or removing a collection directly to the master
collection of a scene.
Consequence of change to handle depsgraph-controlled evaluation of some
IDs (like excluded collections which do not get evaluated and do not get
a COW anymore). See rBcf4258673755 and D10907.
Note that this mostly demonstrates once again how weak and flacky our
handling of embedded IDs still remains, with some part of the code
handling them as independent IDs, some as fully local/private data, some
as a mix of both... and lots and lots of custom handling code and corner
cases that are a bottomless pit of issues.
Also quiet incredible that this was not reported already, luckily this
original change did not make it to 2.93 release.
The check on the transformation introduced in rBb313525c1bd0 to fix
T88515 would sometimes prevent to update the light if the Blender object
changed. To fix this, reverse the order in which the checks happen so
that we do not shortcuit the object change check.
Note that this commit uses a second LogRef (`blo.readfile.undo`) for undo
specific meassages. Allows to use `--log "*undo*"` cli option to match
all undo reporting.
Also did some minor tweaks to some reports on the way.
Navigates the scene by moving/turning relative to navigation space
or the XR viewer/controller. Users can select from a variety of
these modes as well as specify the min/max speed and whether to lock
elevation.
Also: pass float threshold to XR action events.
Those were missing proper (explicit) object cache clear, and DEG
tagging.
Note that this was most likely not an common issue in practice (Collection
object cache clearing recursively goes into all parents, so master
collection would only miss it in case they had no child collections at
all, and tagging of those happens almost always at other steps on
remapping). But better to be explicit and consistent here in any case.
Fix T88808.
Caused by {rB5f2c5e5bb8c15bf0d6679351e3482f9c38c00935}
object type for `TEXT object` was missing in following check
that's why `Set Origin` option was lost from object context menu.
Reviewed By: lichtwerk
Maniphest Tasks: T88808
Differential Revision: https://developer.blender.org/D11495
This reverts commit rB3a48147b8ab92, and fixes the issues with linking
etc.
Change compared to previous buggy commit (rBf8d219dfd4c31) is that
new `BlendFileReadReports` reports are now passed to the lowest level
function generating the `FileData` (`filedata_new()`), which ensures
(and asserts) that all code using it does have a valid non-NULL pointer
to a `BlendFileReadReport` data.
Sorry for the noise, it's always when you think a change is trivial and
do not test it well enough that you end up doing those kind of
mistakes...
Fix by reverting the part of ec30cf0b74
that assigned `but->editval` in `ui_numedit_begin_set_values`.
Causing access freed memory when using tab to switch
to a numeric input and then leaving the textbox by clicking outside.
This was because `ui_numedit_begin_set_values` shouldn't need to set
`but->editval` and overwrite the pointer.
This would set a pointer that had previously been freed,
causing a `NULL` check to fail later on.
Ref D11679
When cut a stroke of 1 point, the clean up done to avoid keep 1 point strokes removes the memory, but the pointer to the first stroke was not set to NULL. As this pointer is invalid now, any use of this produces a segment fault because the pointer is corrupted..
Sphinx has rather loose dependency requirements which can cause issues if we aren't careful.
As a solution they recommend that you pin sphinx dependency versions
Currently the emboss is only fading on left side of the widget,
resulting in the emboss extending vertically on the right side
and ending abruptly. This patch fixes this by also fading the
emboss on the right side and making it symmetric.
Differential Revision: https://developer.blender.org/D10810
This fixes T88346.
The code is also more readable by making a better distinction between
the texts used for Distances, "Proportional Size" and "AutoIK-Len".
And the text used to translate the "Proportional Size" is reused.
This patch fixes many minor spelling mistakes, all in comments or
console output. Mostly contractions like can't, won't, don't, its/it's,
etc.
Differential Revision: https://developer.blender.org/D11663
Reviewed by Harley Acheson
This problem has surprisingly been there for quite a few months.
For point clouds all attributes were handled the same, even "position",
which should be transformed when combining source points into the
destination.
Previously the code assumed that curve instances had no attributes.
This is true when the data came from curve objects, which don't support
attributes currently, but it isn't necessarily true when retrieving curves
from evaluated geometry sets.
Make the virtual functions protected and simpler, so that the logic is
better contained in the base class's implementation. Also introduce a
`copy_without_attributes` method to be used for realizing instances.
Add direct user feedback (as a warning report) to user when recursive
resync of overrides was needed.
And some timing (as CLOG logs) about main readfile process steps.
This is essentially adding a new BlendFileReadReport structure that wraps
BKE_reports list, and adds some extra info (some timing, some info about
overrides and (recursive) resync, etc.).
Allows to decompose a given amount of seconds into a random set of
days/hours/minutes/seconds/milliseconds values.
Also add matching test.
Differential Revision: https://developer.blender.org/D11581
Delay depsgraph visibility update tagging until it is known that
graph relations are up to date, and until it is known that the graph
is actually needed to be evaluated.
Differential Revision: https://developer.blender.org/D11660
Currently, the OptiX BVH build options are selected based on whether
we are in background mode (final renders) or not (viewport renders).
In background mode, the BVH is built for fast path tracing and low
memory footprint, while in viewport, it is built for fast updates.
However, on platforms without OpenGL support, the background flag is
always set to true and prevents using fast BVH builds in the viewport.
Now, the BVH options derive from the Scene BVH settings:
* if BVH is static, a fast to trace BVH is built
* if BVH is dynamic, a fast to update BVH is built
Reviewed By: #cycles, brecht
Differential Revision: https://developer.blender.org/D11154
Apply the same fix for T32214 (edge-select failing) to bones
which also failed when their end-points were outside of the view.
- Add V3D_PROJ_TEST_CLIP_CONTENT support for edit & pose bone iterator
and use for selection operators.
- Remove unnecessarily complicated checks with pose-mode lasso tagging.
- Correct error in pose-mode LassoSelectUserData.is_changed
(currently harmless as it's not read back).
`src` and `dst` are perfectly clear, and avoid repeating unecessary
characters when writing the variables many times, allowing more space
for everything else.
When CMake detects and incompatible Python version
it errors out with an error saying at-least python 3.9
is required, but doesn't mention the version it detected.
This makes troubleshooting the problem harder than it
needs to be.
This diff changes the error message to include the python
version CMake detected.
Differential Revision: https://developer.blender.org/D11666
Reviewed By: Ray Molenkamp
This adds preliminary VS 2022 support, since
there currently is no CMake version that
supports the VS2022 IDE only ninja support
was tested.
IDE support should work without any additional
changes as soon as an updated CMake becomes
available.
As VS2022 appears to keep binary compatibility
with earlier MSVC versions, the current SVN
libraries will work for this version.
This commit optimizes the node for the case where it works on many
splines by allowing it to generate mesh data from their combinations
in parallel. By itself, this made the node around twice as fast in my
test file with a result of 20 million vertices, around 600ms instead of
1.2s before.
That isn't actually a very good result; it reveals another bottleneck,
a single threaded loop over all face corners in the mesh normal
calculation code. As a simple change that might improve performance
in some situations, this commit moves normal calculation out of this
node, so at least the work isn't wasted if the mesh is changed later
on in the node tree anyway.
The depth cache (located in `RegionView3D::depths`) is used for quick
and simple occlusion testing in:
- particle selection,
- "Draw Curve" operator and
- "Interactive Light Track to Cursor" operator,
However, keeping a texture buffer in cache is not a recommended practice.
For displays with high resolution like 8k this represents something
around 132MB.
Also, currently, each call to `ED_view3d_depth_override` invalidates
the depth cache. So that depth is never reused in multiple calls from
an operator (this was not the case in blender 2.79).
This commit allows to create a depth cache and release it in the same
operator. Thus, the buffer is kept in cache for a short time, freeing
up space.
No functional changes.
This patch uses threading to flush selection from verts to edges and
from edges to faces. The solution is lockless and should scale well on
modern CPU architectures.
Master:{F10185359}
Patch:{F10185361}
End user performance went from 3.9 to 4.6 FPS (Stanford Dragon) but that
was measured on a Intel Core i7-6700 CPU and AMD RX480 Gpu. The more
cores the better improvements you get.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11644
This resolves a long standing bug in edge selection
(picking, circle, box & lasso).
Now when one of the edges vertices fails to project into screen space,
the edge is clipped by the viewport to calculate an on-screen location
that can be used instead.
This isn't default as it may be important for the on the screen location
not to be clipped by the viewport.
Adds two new output modes to the CDT api which detect and remove
holes. A hole is a face from which a ray shot to the outside
intersects an even number of constraint edges, except we don't
count constraint edges in the same connected region of faces,
where a region is connected via non-constraint edges.
These modes are useful for filling in outlines meant to represent
text characters and the like.
Original patch was from Erik Abrahamsson, modified by me to work
with the "valid Bmesh" output type too. I also added tests
for the new modes.
Caused by improper testing on my part, assuming a helper function
existed in the industry compatible keymap file, and also assuming it
also used the N and T keys for the left and right side-regions.
A different data structure / implementation is used for curves in the
node tree currently. Converting from the DNA `Curve` structure to this
wasn't slow, but it's nice to decrease overhead. In a test of 14000
splines with 128000 points, this halves the runtime from about 5ms
to about 2.5ms.
The spreadsheet filter tried to apply the mesh selection filter on non-
mesh geometry components. Add a check for the component type,
and also refactor the function to be more easily readable.
The normals were broken because the normal calculation mode wasn't set.
This patch adds a default normal mode so all code creating a spline does
not necessarily have to set it manually. In the future there should be a
way to change this value in the node tree.
- Multi-thread BKE_mesh_recalc_looptri.
- Add BKE_mesh_recalc_looptri_with_normals,
this skips having to calculate normals for ngons.
Exact performance depends on number of faces, size of ngons and
available CPU cores.
For high poly meshes the isolated improvement to BKE_mesh_recalc_looptri
in my tests was between 6.7x .. 25.0x, with the largest gains seen in
meshes containing ngons with many sides.
The overall speedup for high poly meshes containing quads and triangles
is only ~20% although ngon heavy meshes can be much faster.
Remove `seq->tmp` usage from transform code. It was used to tag strips
that need to be "shuffled". Pass these strips in `SeqCollection`
instead.
Reviewed By: sergey, mano-wii
Differential Revision: https://developer.blender.org/D11631
This patch adds support for filtering rows based on rules and values.
Filters will work for any attribute data source, they are a property
of the spreadsheet rather than of the attribute system. The properties
displayed in the row filter can depend on data type of the currently
visible column with that name. If the name is no longer visible, the
row filter filter is grayed out, but it will remember the value until
a column with its name is visible again.
Note: The comments in `screen.c` combined with tagging the sidebar
for redraw after the main region point to a lack of understanding
or technical debt, that is a point to improve in the future.
**Future Improvements**
* T89272: A search menu for visible columns when adding a new filter.
* T89273: Possibly a "Range" operation.
Differential Revision: https://developer.blender.org/D10959
This code was disabled in 2.8 and all other associated code/comments
have been removed/cleared. These rna properties have been replaced with
`seq_prev_type`
Removal of unused local variable. Calculation of underline thickness
no longer needed with change to text output of underscore character.
Introduced in aee04d4960
Differential Revision: https://developer.blender.org/D11641
Currently B-Bone scaling can only be controlled via their
properties, thus requiring up to 8 drivers per joint between
B-Bones to transfer scaling factors from the handle bone.
A Scale Easing option is added to multiply the easing value
by the Y scale channels to synchronize them - this produces a
natural scaling effect where both the shape of the curve and
the scale is affected.
In addition, four toggles are added for each handle, which
multiply each of the X, Y, Z and Ease values by the matching
Local Scale channel of the handle bone, thus replacing trivial
drivers. The Scale Easing option has no effect on this process
since it's easy to just enable both Length and Ease buttons.
Differential Revision: https://developer.blender.org/D9870
Implement actual behavior for the B-Bone Y Scale channels added
to DNA and UI in the previous commit in addition to the existing
X and Z Scale inputs.
The two length scale inputs control the ratio between the lengths
of the start and end segments of the bone: although for convenience
two inputs are provided, the whole chain is still uniformly scaled
to fit the curve.
Differential Revision: https://developer.blender.org/D9870
In addition to the base bone transformation itself, B-Bones have
controls that affect transformation of its segments. For rotation
the features are quite complete, allowing to both reorient the
Bezier handles via properties, and to control them using custom
handle bones. However for scaling there are two deficiencies.
First, there are only X and Y scale factors (actually X and Z),
while lengthwise all segments have the same scaling. The ease
option merely affects the shape of the curve, and does not cause
actual scaling.
Second, scaling can only be controlled via properties, thus
requiring up to 6 drivers per joint between B-Bones to transfer
scaling factors from the handle bone. This is very inefficient.
Finally, the Z channels are confusingly called Y.
This commit adds a B-Bone Y Scale channel and extra B-Bone flag
fields to DNA with appropriate versioning (including for F-Curves
and drivers) in preparation to addressing these limitations.
Functionality is not changed, so the new fields are not used
until the following commits.
Differential Revision: https://developer.blender.org/D9870
When drawing mnemonic underlines for hotkeys, use text output of
underscore character instead of direct drawing a line. Otherwise these
are not visible in dialog buttons.
Introduced in 0fcc063fd9
Differential Revision: https://developer.blender.org/D11641
Reviewed by Campbell Barton
Using an ampersand here is more semantically correct. A slash indicates "or" while an ampersand indicates "and".
An ampersand here is best because the view type shows both the Sequencer and the Preview.
When having multiple materials in a mesh the triangles are sorted based
on material index. This sorting is done single threaded, but needs two
loops over the data. One to count the bucket size and the second one to
add the triangles to the right position in the buckets.
This patch will do the counting in a multithreaded approach that would
speed up the cache creation. It has been measured that this part is the
most blocking part of the cache creation.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11615
During selections the total selection is refreshed at the end. This
process was done single threaded. This patch will do a parallel iter
approach.
Master: 0.043612s Threaded 0.017964s.
Master: {F10179586}
This patch: {F10179587}
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11622
`ED_fileselect_get_asset_params` would only return actual data pointer
when file browser is in ASSET mode.
Calling that whole section only makes sense if filebrowser is in asset
mode anyway.
Regression introduced in rBf6c5af3d4753 I think.
@Severin committing this fix now as this is a fairly critical bug for
the studio, feel free to revert and do proper fix if this one is not the
best solution.
This patch ensures that selection mode flushing updates total selection
counts internally. This reduces recounting when we are sure that the
input total selection counts were up to date.
For example for circle selection the total selection counts were
correct. But during flushing the selection could have been changed and
therefore the selection was always recounted.
This increased the performance on selected system from 6.90 FPS to 8.25
FPS during circle selection operations.
Before: {F10179981}
After: {F10179982}
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11647
Similar to the XR grab transform operator but applies deltas to the
navigation matrix instead of objects. Supports bimanual interaction
for viewer/navigation scaling and locks for rotation and scale.
Although only one modal action is allowed at a time, if another
modal action is pressed when the current modal action ends, then
transition immediately to that one.
This corrects some clipping and shading issues when a scale factor
is applied to the XR viewmat. Also fixes the viewer pose calculation
with VR navigation.
When an object, whose mesh gets loaded from Alembic, gets animated in
Blender and the Alembic CacheFile datablock also gets animated, editing
keyframes causes both datablock to be re-copied for evaluation. This
caused a threading issue and a double-free of some memory. This is fixed
by expanding the scope of the spin lock in
`BKE_cachefile_reader_free()`.
Contributed by @erik85 in D11400. The idea from this patch was placed in
a more generic context: A new FOR macro has been added that loops
over the neighbors of a cell within a given radius.
This matches BMesh which also has tessellation in it's own file.
Using a separate file helps with organization when
extracting code into smaller functions.
The //Raycast// node intersects rays from one geometry onto another.
It computes hit points on the target mesh and returns normals, distances
and any surface attribute specified by the user.
A ray starts on each point of the input //Geometry//. Rays continue
in the //Ray Direction// until they either hit the //Target Geometry//
or reach the //Ray Length// limit. If the target is hit, the value of the
//Is Hit// attribute in the output mesh will be true. //Hit Position//,
//Hit Normal//, //Hit Distance// and //Hit Index// are the properties of the
target mesh at the intersection point. In addition, a //Target Attribute//
can be specified that is interpolated at the hit point and the result
stored in //Hit Attribute//.
Docs: D11620
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D11619
This node creates splines with more control points in between the
existing control points. The point is to give the splines more
definition for further tweaking like randomization with white noise,
instead of deforming a resampled poly spline with a noise texture.
For poly splines and NURBS, the node simply interpolates new values
between the existing control points. However, for Bezier splines,
the result follows the existing evaluated shape of the curve, changing
the handle positions and handle types to make that possible.
The number of "cuts" can be controlled by an integer input, or an
attribute can be used. Both spline and point domain attributes are
supported, so the number of cuts can vary using the value from the
point at the start of each segment.
Dynamic curve attributes are interpolated to the result with linear
interpolation.
Differential Revision: https://developer.blender.org/D11421
The minimum twist mode is important because it allows creating
normals without sudden changes in direction. The disadvantage
of minimum twist normals is that the normals depend on all control
points. So changing one control point can change the normals
everywhere. The computed normals do not match the existing
code exactly, although they do match quite well on non-cyclic and
on some cyclic curves. I also noticed that the existing implementation
has some fairly simple failure cases that I haven't found in the new
implementation so far.
Differential Revision: https://developer.blender.org/D11621
This makes the parts where a node is locked more explicit. Also, now the thread
is isolated when the node is locked. This prevents some kinds of deadlocks
(which haven't happened in practice yet).
- BKE_mesh_copy_parameters_for_eval to be used for evaluated meshes only
as it doesn't handle ID user-counts.
- BKE_mesh_copy_parameters is a general function for copying parameters
between meshes.
Refactor function `freeSeqData` so it is readable.
One strip can have multiple transform operations defined. To prevent
processing strip multiple times, build `SeqCollection` and use
sequencer iterator instead of iterating `TransData` directly.
No functional changes.
Differential Revision: https://developer.blender.org/D11618
Reduce complexity of sequencer transform code by removing recursivity.
This is possible by treating meta strips (mostly) as any other strip and
containing all transform code within SEQ_ functions.
Unfortunately internally meta strips still require special treatment,
but all complexity from code all over transform code seems to be
possible to contain within one function.
Functional change:
Previously adjusting handle of single image strip moved animation.
Now animation is not moved, which is behavior for all other strips.
Reviewed By: sergey, mano-wii
Differential Revision: https://developer.blender.org/D11493
Starts scrolling when dragging a node or node link and going outside the current window.
Largely copied from the VIEW2D_OT_edge_pan operator.
Edge panning operator customdata and supporting functions now in
UI_view2d.h, so they could be used by operators in other editor
libraries. The VIEW2D_OT_edge_pan operator also uses this customdata and
shared functions now. Operators properties can be used to configure
edge panning margins and speed for each use case, rather than using
hardcoded values.
The speed function for edge panning has been tweaked somewhat:
* "Speed per pixel" has been replaced with a "speed ramp" distance.
This is more intuitive and also creates an upper bound for the speed,
which can otherwise become extreme with large cursor distance.
* "Max speed" is reached at the end of the speed ramp.
* Padding the region inside and outside is applied as before, but both
values are operator properties now.
Node transform operator also supports edge panning. This requires
an offset for changes in the view2d rect, otherwise nodes are "stuck"
to the original view.
Transform operator had cursor wrapping categorically enabled, but this
gets quite confusing with the edge scrolling mechanism. A new TransInfo
option T_NO_CURSOR_WRAP has been introduced to disable this behavior.
The double negative is a bit annoying, but want to avoid affecting the
existing transform modes, so by default it should still set the
OP_IS_MODAL_GRAB_CURSOR flag (which then sets the WM_CURSOR_WRAP_XY
flag during modal execution).
Reviewed By: HooglyBoogly, JacquesLucke
Differential Revision: https://developer.blender.org/D11073
This allows line art to run only once for each modifier stacks,
with an option to toggle a specific line art modifier should
use cache or re-do their own calculations.
Reviewed By: Sebastian Parborg (zeddb), Hans Goudey (HooglyBoogly)
Differential Revision: https://developer.blender.org/D11291
This makes it easier to use task isolation in c++ code.
Previously, one either had to check `WITH_TBB` (possibly indirectly
through `WITH_OPENVDB`) or one had to use the C function which
is less convenient.
This namespace groups threading related functions/classes. This avoids
adding more threading related stuff to the blender namespace. Also it
makes naming a bit easier, e.g. the c++ version of BLI_task_isolate could
become blender::threading::isolate_task or something similar.
Differential Revision: https://developer.blender.org/D11624
Similar to what we do for constraints and modifiers, except that
currently adding or editing shaderfx in liboverride objects is
completely unsuported.
Fix T88974.
Used to detect if a shaderfx is purely local, or comes from linked data,
in case of a liboverride.
Not actually used yet since we do not currently support adding
shaderfx's to overrides, but will be in the future, and matches
constraints and modifiers code.
Mainly:
* Make `ED_operator_object_active_editable_ex` properly report poll
messages on failure.
* Add `ED_operator_object_active_local_editable_posemode_exclusive` for
bone constraints requiring pure local Object (non-override one).
* General cleanup and adding more poll messages on failures.
On selecting a multi-layer image with a combined pass, a "Combined"
socket is created and default combined pass socket "Image" is
disabled by setting `SOCK_UNAVAIL` flag. When converting into
operations, `ImageNode` converts alpha socket on finding any socket with
a combined pass without checking the flag.
Since commit rB93e2491ee724 an assertion fails when mapping sockets
twice because now map `add_new` is used.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11566
Adds full frame implementation to Value node operation.
No functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11594
This adds support for importing UV sets which are defined per vertex,
instead of per face corners. Such UV sets can be generated when the
mesh is split according to UV islands, or when there is only one UV
island, in which cases only a single UV value can be stored per
vertex since vertices will never be on a seam.
- Include all objects in pose mode.
- Show the number of objects in pose mode.
- Show the number of objects in edit mode for all types of objects
(not just meshes).
This adds support for importing UV sets which are defined per vertex,
instead of per face corners. Such UV sets can be generated when the
mesh is split according to UV islands, or when there is only one UV
island, in which cases only a single UV value can be stored per
vertex since vertices will never be on a seam.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D11584
Implementation of T86970. This node takes a geometry input with
multiple components and outputs them by component type. Meshes,
Curves, and Point Clouds support combining multiple input instances,
while volumes will only output the first volume component input until
suitable instance realization for multiple volumes is finished.
When direct geometry instancing is implemented it will be possible to
avoid realizing instances in this node.
Differential Revision: https://developer.blender.org/D11577
Creating a new full screen area had it's area initialized as empty,
updating the screen then set the area to a 3D view (as a fallback),
before the actual area type was set.
This made setting the intended space-type run the 3D views exit callback
on a 3D view without a View3D struct allocated, which the exit callback
needed to account for.
Resolve by calling ED_screen_change after the area type has been set.
This patch improves the 3DView statistics overlay to show LOCAL stats
while in local view. This means the stats can vary between 3DViews and
the statusbar when views are in local view, but this gives a much more
accurate count of the objects, and their components, that you are
directly working with rather than just scene values.
Differential Revision: https://developer.blender.org/D8883
Reviewed by Campbell Barton
Versioning code for converting strip offset property doesn't work, when
property was animated and disabled or when crop was used.
When offset property is animated and offset is enabled, animation is
converted to be used with new transform design. When offset is disabled,
animation is left untouched. New transform design doesn't have option
to disable offset, and therefore old unconverted animation is used
instead of converted static value.
Remove animation from propery if it was unused.
Another issue was that both X and Y offset animation was being corrected
by factor caluclated for X channel.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11370
Use lookup string callback function for `sequences_all` RNA property
`rna_SequenceEditor_sequences_all_lookup_string` using a GHash for faster lookups.
When names are changed or strips are added/removed the lookup is tagged invalid.
The next time the lookup is used it will rebuild it.
Reviewed By: sergey, jbakker
Differential Revision: https://developer.blender.org/D11544
Just like the way we often have a choice between an attribute input and
a single float, this adds the ability to choose between attribute and
integer input sockets, useful for D11421.
There is no particular reason these two functions shouldn't be used
outside of the bezier spline implementation since they don't do anything
particularly controversial.
Create maps that specify which batches have vbo or ibo as a reference
and use these maps to discard batches along with buffers.
Differential Revision: https://developer.blender.org/D11588
Adds `source/blender/blendloader/intern/versioning_common.cc` and
`versioning_common.h` for version independent versioning functions.
I only placed `do_versions_add_region_if_not_found()` in there for now.
`blo_do_version_old_trackto_to_constraints()` could also be added, but
that's so old, I prefer keeping that in `versioning_legacy.c`.
Widget drawing code already supported drawing right-aligned, grayed out
shortcut strings. This patch generalizes things a bit so this can also
be used to draw other hints in the same way. There have been a few
instances in the past where this would've been useful, D11046 being the
latest one.
Note that besides some manual regression testing, I didn't check if this
works yet, as there is no code actually using it (other than the
shortcuts). Can be checked as part of further development for D11046.
A possible further improvement would be providing a way to define how
clipping should be done. E.g. sometimes the right-aligned text should be
clipped first (because it's just a hint), in other cases it should be
left untouched (like current code explicitly does it for shortcuts).
Removes the `UI_BUT_HAS_SHORTCUT` flag, which isn't needed anymore.
After looking into task isolation issues with Sergey, we couldn't find the
reason behind the deadlocks that we are getting in T87938 and a Sprite Fright
file involving motion blur renders.
There is no apparent place where we adding or waiting on tasks in a task group
from different isolation regions, which is what is known to cause problems. Yet
it still hangs. Either we do not understand some limitation of TBB isolation,
or there is a bug in TBB, but we could not figure it out.
Instead the idea is to use isolation only where we know we need it: when
holding a mutex lock and then doing some multithreaded operation within that
locked region. Three places where we do this now:
* Generated images
* Cached BVH tree building
* OpenVDB lazy grid loading
Compared to the more automatic approach previously used, there is the downside
that it is easy to miss places where we need isolation. Yet doing it more
automatically is also causing unexpected issue and bugs that we found no
solution for, so this seems better.
Patch implemented by Sergey and me.
Differential Revision: https://developer.blender.org/D11603
When using multiple materials in a single mesh the most time is spend in
counting the offsets of each material for the sorting.
This patch moves the counting of the offsets to render mesh data and
caches it as long as the geometry doesn't change.
This patch doesn't include multithreading of this code.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11612
Clear the runtime data structs instead of individual members,
this simplifies adding new runtime members as there are at least
two places they would need to be cleared.
Resolves error in D8883.
This commit lets the join geometry node transfer dynamic attributes
to the result, the same way that point cloud and mesh attributes are
joined. The implementation is different though, because of an
optimization implemented for curves to avoid copying splines.
The result attribute is added with the highest priority domain (points
over splines), and the highest complexity data type. If one curve had
the attribute on the spline domain but not others, the point domain
values will be used.
Generally this is a bit lower level than I would have liked this code
to be, but should be efficient, and it's really not too complicated.
Differential Revision: https://developer.blender.org/D11491
Instead of building a set and then determining the final domain and
type for every attribute separately in the loop, construct a map with
the necessary data in the first place. This is simpler and should be
slightly more efficient.
Split from D11491
This is an implementation of T88722. It accepts a curve object and
for each spline, reverses the order of the points and all attributes.
This is more of a foundational node to support other nodes in the
future (like curve deform)
Selection takes spline domain attributes to determine which splines
are selected. If no selection is present all splines are reversed.
Differential Revision: https://developer.blender.org/D11538
This node implements the second option of T87429, creating points
along the input splines with the necessary evaluated information
for instancing: `tangent`, `normal`, and `rotation` attributes.
All generic curve point and spline attributes are copied to the
result points as well.
The "Count" and "Length" methods are just like the current options
in the resample node, but the output is points instead of a curve.
The "Evaluated" method uses the points you see on the curve directly,
and therefore should be the fastest.
The rotation data is retrieved from a transform matrix built with the
same method that the curve to mesh node uses. The radius attribute is
divided by 10 so the points don't look absurdly huge in the viewport.
In the future that could be an option.
For the implementation, one thing that could use an improvement
is the amount of temporary allocations while resampling to evaluated
points before the final points. I expect that reusing a buffer for
each thread would give a nice improvement.
Differential Revision: https://developer.blender.org/D11539
This patch allows Windows users to specify that their current blender
installation should be used to create thumbnails and be associated
with ".blend" files. This is done from Preferences / System. The only
way to do this currently is from the command-line and this is sometimes
inconvenient.
Differential Revision: https://developer.blender.org/D10887
Reviewed by Brecht Van Lommel
If the last decoded frame had the same timestamp as the GOP current
packet, then we would skip over this frame when fast forwarding and we
would seek until the end of the file.
This would could only be triggered reliably in single threaded mode.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11601
The warning would appear when using the `ENUM_OPERATORS()` macro inside
of an `extern "C"` block.
Didn't cause a warning in master currently, but in the
`asset-browser-poselib` branch.
After macro expansion, there would be C++ code in code with C linkage
(`extern "C"`). So make sure the expanded C++ code always uses C++
linkage.
The syntax used is totally C++ compliant: the C++ standard requires that
in such nested linkage specifications, the innermost one determines the
linking language (e.g. see
https://timsong-cpp.github.io/cppwp/n4659/dcl.link#4).
On the Windows platform there will be some errors printed to the
console if the user's thumbnail cache folder doesn't already exist.
While creating those folders there is an attempt to do so multiple
times and so we get errors when trying to create when exists. This
is caused by paths that have hard-coded forward slashes, which causes
our path processing routines to not work correctly. This patch defines
those paths using platform-varying separator characters.
Differential Revision: https://developer.blender.org/D11505
Reviewed by Brecht Van Lommel
Support calculating face normals when tessellating. When this is done
before updating vertex normals it gives ~20% performance improvement.
Now vertex normal calculation only needs to perform a single pass on the
mesh vertices when called after tessellation.
Extended versions of normal & looptri update functions have been added:
- BM_mesh_calc_tessellation_ex
- BM_mesh_normals_update_ex
Most callers don't need to be aware of this detail by using:
- BKE_editmesh_looptri_and_normals_calc
- BKE_editmesh_looptri_and_normals_calc_with_partial
- EDBM_update also takes advantage of this,
where calling EDBM_update with calc_looptri & calc_normals
enabled uses the faster normal updating logic.
Bypass stored edge-vectors for ~16% performance gains.
While this increases unit-length edge-vector calculations by around ~4x
the overhead of a parallel loop over all edges makes it worthwhile.
Note that caching edge-vectors per-vertex performs better and may be
worth investigating further, although in my tests this increases code
complexity with barley measurable benefits over not using cache at all.
Details about performance and possible optimizations are noted in
bm_vert_calc_normals_impl.
Rename function EDBM_update_generic to EDBM_update, use a parameters
argument for better readability.
Also add calc_normals argument, which will have benefits when
calculating normals and tessellation together is optimized.
For some custom rendering engines it's advantageous not to write the image files to disk.
An example would be a network rendering engine which does it's own image writing.
This feature is only supported when bl_use_postprocess is also disabled, since render
engines can't influence the saving behavior of the sequencer or compositor.
Differential Revision: https://developer.blender.org/D11512
Better to avoid explicit vectors components direct manipulation when a
generic operation for whole vector exists, if nothing else it avoids
potential mistakes in indices.
Those were caused by various tools used on degenerate geometry, see
T79775.
Note that fixes are as low-level as possible, to ensure they cover as
much as possible of unreported issues too.
We still probably have many more of those hidden in BLI_math though.
The axis flags allow binding actions to certain regions of an input
axis (positive or negative). In this way, two different actions can
be bound to the input path "/input/thumbstick/x" without overlapping.
The bimanual flag signifies that the action depends on inputs from
both of its subaction paths, and both states, if available, will then
be passed to the operator. This will be used in the future for
two-handed navigation and transform.
Mostly the same as the XR raycast select operator. Users can
optionally constrain the result to specific axes, for example to
achieve "elevation snapping" behavior by constraining to the Z-axis.
Credit to KISKA for the elevation snapping concept.
Adds navigation transforms (pose, scale) to the XR session state
that will be applied to the viewer/controller poses.
Users can access these transforms via Python
(xr_session_state.navigation_location/rotation/scale) to use with
custom operators.
- GHOST_XrException: Use std::string instead of const char*
- GHOST_XrActionProfile: Move default dtor declaration to header
- GHOST_XrActionSet/Action: Fix mem leak on exception in ctor
Except for motion capture object autokeying (will be added again once
a good way to get the blender context from wm_xr_session is found),
functionality remains the same as before.
Aside from general cleanup, changed that only user actionconfigs and
the builtin user config can be saved to blend files (the builtin
default and addon configs are excluded).
Previously, properties for XR actions were stored in keymaps but they
are now stored in a separate XR "actionmaps" system. Although the
actionmap system/API has many similarities to the keymaps, it is
significantly less complex since it does not involve any diff-ing of
default/addon/user configurations (at least at the moment).
Another big distinction between keymaps and actionmaps is that
actionmaps and properties are saved to blend files. This allows users
to set up a VR scene with actions and properties and share working
versions with others, without the need to import/export config files.
However, actionmap import/export is also supported via the addon.
There is still a fair amount of refactoring left to do but at least
this commit removes XR involvement from the keymaps while preserving
most of the existing XR action functionality (i.e. default actions
and user-configurable actions).
It might be good to have a WM equivalent for GHOST_XrPose (e.g.
wmXrPose) since converting from location/rotation or float[7] to
GHOST_XrPose can be pretty awkward.
Remove unnecessary data from GHOST types and mostly eliminate use of
GHOST types at RNA level. At the WM level, action creation functions
deal with single actions (instead of multiple actions at once) to
simplify the API.
Allows users to choose their preferred controller visualization
(controller local axes or -Z axis ray). The enum can be extended in
the future for additional visualizations.
If an object was constrained to a headset/controller pose during the
session, then its original transform will be restored at session end
to prevent unwanted changes to the scene. This will also occur when
toggling the constraint or changing the constrained object.
Prevents unwanted behavior when a modal operator is bound to multiple
inputs (e.g. when an action has multiple subaction paths). Can be
refactored in the future to support "bimanual" interaction for some
operators.
The new "exec" functions are added for the sake of the VR Scene
Inspection add-on and do not affect the behavior of the existing
keymap I/O functions.
keyconfig_export_as_data_exec() enables exporting a specified keymap
instead of all user-modified keymaps. The VR add-on uses this to
selectively export the "XR Session" add-on keymap.
keyconfig_import_as_data_exec() enables adding keymap data to an
existing keyconfig instead of creating a new keyconfig. The VR add-on
uses this to add the "XR Session" keymap to the add-on keyconfig.
Since xrSuggestInteractionProfileBindings() overwrites any existing
profile bindings, the solution is to suggest bindings from all action
sets at the same time (done just before attaching action sets to the
session).
Not applying an implicit Z-up conversion for OpenXR coordinates may
be better since poses may have different orientations / tracking
spaces. Users can instead apply custom pose offsets via the UI /
Python API if necessary.
Transforms selected objects' location / rotation relative to a
controller's pose. Very basic compared to the existing transform
operators (which can also be used in VR via modal_3d), but provides
a more natural interaction in VR.
Object was originally meant to visualize the controller and be drawn
by the overlay engine, however it was unused since controllers are
now drawn via draw handlers. It might be added again in the future
for drawing more complex controller geometry.
Enables add-ons to draw to the XR surface and mirror window by
adding a View3D draw handler of region type 'XR' and draw type
'POST_VIEW'. Also allows individual toggling of controller drawing
and custom overlays.
Even if the stage reference space is supported by the XR runtime, the
bounds may be invalid (0, 0) if the user did not define a tracking
space via the runtime's UI. In this case, fall back to the local
tracking space.
Enables users to define the tracking origin in a way that is not
linked to the headset position. Instead, the tracking values given by
the XR runtime are left unadjusted and a user can manually calibrate
an "origin" landmark object to adjust to their real world space.
Can be useful for applications that use external tracking systems
and those that primarily only need to use controllers (e.g. for
motion capture).
Uses the same raycast method as Scene.ray_cast() and works in object
and edit mode. Although it gives users an alternative to the existing
projection-based VR selection method, it is limited to objects with
real geometry (i.e. meshes).
These objects (3 in total, corresponding to headset and left/right
controllers) will have their location and rotation determined by the
associated XR pose. This provides a way for add-ons to achieve
this "VR constraint" behavior without the need to constantly query
pose information.
Originally thought that not terminating the session for certain "non-
fatal" errors (e.g. an incorrect action path) would make sense.
However, realized that error messages can pile up this way and it
is better for user feedback and debugging to always exit the session
when encountering an OpenXR-level error.
Pointers to op properties are stored in the XR session state as
IDProperty* and applied upon op execution. The actual properties
themselves are stored as key map items (new "XR" and "XR Session"
key maps were added to the blender default key maps).
The "XR" key map is intended to store op properties for action sets
that are saved in add-on (e.g. the VR Scene Inspection add-on) prefs.
The "XR Session" key map is intended to store op properties for scene
action sets, with these properties used for the XR session.
In this way, scene action sets can configure properties without
worrying about overwriting properties for action sets saved in prefs.
The "selection eye" is the XR eye (view) used for 3D-to-2D projection.
Its parameters are used to override the window view when selecting
with VR controllers.
This follows the same logic as invoke_3d(). That is, we wrap an
operator's modal() with modal_3d() and project 3D controller coords to
2D mouse coords.
message(FATAL_ERROR"32 bit compiler detected, blender no longer provides pre-build libraries for 32 bit windows, please set the LIBDIR cmake variable to your own library folder")
Itwillsoonbeusedby the ../utils/make_update.pyscript.
The file allows to set branches or specific commits for both git submodules and svn artifacts. Can also define various build package versions for use by build workers. Especially useful in experimental and release branches.
setBUILD_CMAKE_ARGS=%BUILD_CMAKE_ARGS% -G "Visual Studio %BUILD_VS_VER%%BUILD_VS_YEAR%%BUILD_GENERATOR_POST%"%BUILD_PLATFORM_SELECT%%TESTS_CMAKE_ARGS%%CLANG_CMAKE_ARGS%%ASAN_CMAKE_ARGS%%PYDEBUG_CMAKE_ARGS%
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
