Caused by {rB571362642201} where versioning code for new sequencer tool
settings was only done for scenes already having sequencer scene->ed.
If scene->ed was not present, sequencer tool settings were never
initalized for this scene [if the VSE was then used later], leading to
crashes in some places.
Now just use the versioning code to initalize sequencer tool settings
for all scenes not having them yet.
Maniphest Tasks: T87010
Differential Revision: https://developer.blender.org/D10996
Click-drag events that weren't handled would continually be tested
for each mouse-motion event.
As well as being redundant, this added the overhead of querying
gizmos twice per motion event.
Now click-drag is only tested once when the drag threshold is reached.
This mitigates T87511, although the single drag test still causes
the snap gizmo to flicker.
The intention with this API function was to temporarily load
ID's tagged LIB_TAG_TEMP_MAIN,
however the way the `real_main` was used,
these ID's were loaded into the G.main.
`ob->runtime.geometry_set_eval` can contain instances as well.
This only affected instances generated by geometry nodes.
We should probably have a separate function that tells us if an object
has instances or not..
Compilation fails when our OCIO wrapper creates a shader that
transfer first to scene ref and directly after that to display.
This cause is that the GPU resources of both transfers had the same
name. This is fixed by prefixing the resources.
This can be reproduced by loading a movie file (mkv) in the VSE editor.
Reported by Sergey Sharybin.
In the past, custom attributes were rarely used in practice, because the
only way to use them was from Python. Since geometry nodes, more
users started to add their own attributes. Those attributes should not
be removed automatically. It is still possible to remove them in
geometry nodes explictly to improve performance.
This has technically been fixed by rB3e87d8a4315d794efff659e40f0bb9e34e2aec8a,
but the fix there is questionable, because it disables an optimization for vertex groups
entirely. This fix is a little bit more precise in that it only disables the optimization when
the object is used by some geometry nodes modifier.
This flag is needed so PointerRNA structs that aren't
part of the current context can access enum values
without inspecting the context.
This is needed for keymap access, so the keymap UI and keymap
export doesn't depend on the current context.
This changes the following items:
- package name is now `blender-3.0.0-git.09eb04c0a865-windows64`
rather than `blender-3.00.0-git.09eb04c0a865-windows64`
- Fix version resource for blender.exe not building
- Data directories are now `3.0\...` rather than `3.00\....`
- User prefs are now in:
`c:\Users\users\AppData\Roaming\Blender Foundation\Blender\3.0\`
rather than:
`c:\Users\users\AppData\Roaming\Blender Foundation\Blender\3.00\`
- Updating startup & preferences from previous release
has a special exception for 3.0 to check for 3.93 and older.
See T87532
Ref D10986
`make lite` does not use audaspace, so some files will pollute the console with
tons of warnings about audio values not defined.
Reviewed By: nexyon, campbellbarton
Differential Revision: https://developer.blender.org/D10981
The exporting was creating a pdf state for each stroke, but this was necessary only for strokes with opacity.
Now, the state is only created when needed and remove the state variable from class.
Also, avoid exporting invisible strokes.
Blender 3.0 is now in bcon1 (alpha).
There are likely a few places in Blender and the automated building pipeline
that may fail since we are switching our versioning number system.
For example, at the moment the splash and the status bar are showing
3.00.0, and it should show 3.1.0.
I suspect the Python API, version used to report a bug, buildname, are
all wrong too. These will be handled later.
Since these were added, we decided that builtin and reserved name
attributes start with a lowercase letter. We also use "id" already in
a few nodes, so this change will be consistent with that.
When inserting a node on top of a link, the multi input socket
indices weren't updated. This fixes that and keeps the relative
order of the links the same.
Author: Wannes Malfait
Reviewed By: Fabian Schempp
Differential Revision: https://developer.blender.org/D10969
T87356 occured because last_node_hovered_while_dragging_a_link was not
set on node_link_init.
The assert in T87358 failed because the sorting operation was called even
if the drag link contained a link to another socket.
A little one frame jump was caused because frame was refreshed after
picking a link and before sorting happened.
Reviewer: Hans Goudey
Differential Revision: https://developer.blender.org/D10940
This introduces a context path to the spreadsheet editor, which contains
information about what data is shown in the spreadsheet. The context
path (breadcrumbs) can reference a specific node in a node group
hierarchy. During object evaluation, the geometry nodes modifier checks
what data is currently requested by visible spreadsheets and stores
the corresponding geometry sets separately for later access.
The context path can be updated by the user explicitely, by clicking
on the new icon in the header of nodes. Under some circumstances,
the context path is updated automatically based on Blender's context.
This patch also consolidates the "Node" and "Final" object evaluation
mode to just "Evaluated". Based on the current context path, either
the final geometry set of an object will be displayed, or the data at
a specific node.
The new preview icon in geometry nodes now behaves more like
a toggle. It can be clicked again to clear the context path in an
open spreadsheet editor.
Previously, only an object could be pinned in the spreadsheet editor.
Now it is possible to pin the entire context path. That allows two
different spreadsheets to display geometry data from two different
nodes.
The breadcrumbs in the spreadsheet header can be collapsed by
clicking on the arrow icons. It's not ideal but works well for now.
This might be changed again, if we get a data set region on the left.
Differential Revision: https://developer.blender.org/D10931
The fact that geometry from instnances isn't realized when applying
a nodes modifier can be very confusing, especially for new users.
Nodes themselves realize geometry instances implicitly whenever they
need to. We also currently make instances real and convert points to
mesh when a modifier is added after the nodes modifier. With this
commit, we simply do the same thing when applying the modifier.
There are a few downsides though:
- This can be an extremely heavy operations in some cases where
geometry nodes is used to instance heavy geometry.
- We will still have the issues with materials, since instances use
materials from their original objects, but real geometry uses
materials from the modifier object.
It was decided to live with the potential performance downsides
for now, the idea is the upsides of the change are more important,
and people making complicated setups will be more likely to know not
to apply the modifier. In the future there could be a warning if it's
necessary though.
Ref T87083
This will hopefully make it faster to start using the node editor.
The workspace also includes the spreadsheet. Note that while
existing startup files won't have this workspace added, it will be
in the list of options when clicking on the "add workspace" button.
Ref T86499
Now, instead to offset the stroke color to make it visible over fill, the stroke keeps the original color and the fill is offset.
Related to the issue in T87406.
The color of the strokes was shifted when using `Single Color` or
`Object Color`in Solid Display Mode. This was originally done so
that it was still possible to differentiate strokes and fills.
The fix allows for a completly flat shading by checking if the
Lighting Mode is set to `Flat`. If it is, then the colors are not
shifted for the strokes and everything will use the same color.
Reviewed By: antoniov, fclem
Maniphest Tasks: T87406
Differential Revision: https://developer.blender.org/D10957
This patch adds domain and data type information to each row of the
attribute search menu. The data type is displayed on the right, just
like how the list is exposed for the existing point cloud and hair
attribute panels. The domain is exposed on the left like the menu
hierarchy from menu search.
For the implementation, the attribute hint information is stored as a
set instead of a multi-value map so that every item (which we need to
point to descretely in the search process) contains the necessary data
type and domain information by itself. We also need to allocate a new
struct for every button, which requires a change to allow passing a
newly allocated argument to search buttons.
Note that the search does't yet handle the case where there are two
attributes with the same name but different domains or data types in
the input geometry set. That will be handled as a separate improvement.
Differential Revision: https://developer.blender.org/D10623
Within the 2D Animation workspace, the 'Cursor' dropdown currently displays the 'Display Cursor' incorrectly aligned.
This change fixes the alignment issue.
Reviewed By: #user_interface, #grease_pencil, antoniov
Differential Revision: https://developer.blender.org/D10614
GOP size and quality are adjusted for h264 codec.
These new values are based on result of benchmark on 9 random files:
https://docs.google.com/spreadsheets/d/1nOyUGjoVWUyhQ2y2lAd8VtFfyaY1wQNGj1krCCNbk7Y/edit?usp=sharing
Reducing quality to 50 reduces proxy filesize by about 2x on average
and has no significant impact on decoding performance.
Increasing GOP size from 2 to 10 also reduces proxy filesize 2x-3x
while scrubbing is only about 8% slower. It is still around 100FPS
with 1920x1080 media.
This is unfortunately about 50% slower than MJPEG, but this can be
improved with `fastdecode` tune applied to libx264 encoder
Quite surprisingly h264 codec presets had little influence on proxy
building performance as well as proxy filesize. So far it looks that
FFmpeg does initialize encoder in different way then Blender.
This applies mot only for presets but for tune and profile libx264
setting.
Once this issue is resolved, performance of proxies may be optimized
further.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10897
When trying to export a GPencil object to SVG from outside the camera
view, the expoted file would contain invalid data. This was because the
calculation of the bounding box did not have any objects to
iterate over.
The fix makes sure we create the object list before trying to calculate
the bounding box.
Reviewed By: antoniov
Maniphest Tasks: T87479
Differential Revision: https://developer.blender.org/D10975
Some operations may use no preferredResolution ({0, 0}) when calling determineResolution on inputs to check if they have resolution on their own. See MixOperation or MathOperation determineResolution implementation. In such cases {0, 0} resolution ends up being set when an input doesn't have own resolution, breaking propagation of the original preferredResolution. They don't mean to set it as resolution, it's just a check.
This patch only allows to set valid resolutions (>0). When it's 0 it may be understood as "No preferred or determined resolution" so it should not be set to give output operations another chance of finding a proper resolution by calling determineResolution again with a different preferredResolution.
Test file:
{F9932526}
Reviewed By: #compositing, jbakker
Differential Revision: https://developer.blender.org/D10972
The SB back-end optimizer for the mesa R600g driver corrupts the vertex
shader for widget drawing. This will not be fixed upstream because SB is
getting replaced as part of the new NIR path. This was thought to be an
issue with instancing and an attempted fix was submitted in D8374, but
it did not fix the issue.
This patch reimplements the array look-up part of the code using switch
case as a workaround and removes the old workaround implemented as part
of D8374.
Reviewed By: Clement Foucault
Differential Revision: https://developer.blender.org/D10967
With this patch, users can define custom tooltips for the exposed
properties of their Geometry Nodes Groups.
Currently this custom tooltips are only used in the modifier panel,
but its a long term goal to use it in the node editor.
Reviewer: Hans Goudey
Differential Revision: https://developer.blender.org/D10884
This implements the changes discussed in T87134 for including switch
object funcionality in 2.93. This includes:
- Remove the switch object operator experimental option
- Remove the option for switching objects in Edit Mode.
- Rename switch_object to transfer_mode.
- Enable the operator only in sculpt mode.
- Expose the operator in the Sculpt menu with an eyedropper modal
option.
On later releases, we could revisit enabling the operator in other mode
and object types as well as its place in the UI.
Reviewed By: JulienKaspar, JacquesLucke
Differential Revision: https://developer.blender.org/D10953
Sculpt menus were using the legacy expand operator. This updates all
entries to use the new one.
It does not make sense to use Expand from the menus as it relies on the
brush cursor position, but now all Expand shortcuts are listed in the
UI.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10952
Previously, the bone position outside of "fit to curve length" mode was
incorrect.
It assumed that the curve was completely straight with no bends or
turns. This would lead to bones being scaled down as their final
position would be servery underestimated in some cases.
The solution is to do a sphere -> curve intersection test to see where
to put the bones while still preserving their length. As we are using
the tessellated curve data this essentially boils down to us doing a
sphere -> line intersection check.
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D10849
Add a `source_archive_complete` target for `make` that creates a source
archive including the source packages of Blender's dependencies.
This expands `make_source_archive.py` to include files from
`${BUILD_DIR}/source_archive/packages/` as well.
Reviewed By: dfelinto
Maniphest Tasks: T86124
Differential Revision: https://developer.blender.org/D10727
This is done to ensure building with newer OptiX SDK releases that add new struct fields gives
deterministic results (no uninitialized fields and therefore random data is passed to OptiX).
Pass `bContext *C` a bit further down the call stack, to prevent
exploding the number of parameters of `ED_preview_icon_render()`. An
upcoming change will require access to yet another context member, and
this can now be done without adding yet another parameter.
No functional changes.
Adds appropriate checks/guards around all the untrusted parameters
which are used for reading from memory.
Validation:
- All the crashing files within the bug have been checked to not causes
crashes any longer>
- A handful of correct .bmp were validated: 3 different files at each
of 1, 4, 8, 24, 32 bpp depth along with a random variety of other 24
bpp files (around 20 in total).
- ~280 million iterations of fuzzing using AFL were completed with 0
crashes. The old code experienced several dozen crashes in first
minutes of running {F8584509}.
Ref D7945
Entering the numbers in the keyframe field was not triggering a viewport
update, so the little green lines down in the cache area were only
change when the user e.g. changed the frame.
Now send appropriate notifiers.
Issue spotted in T86456 by sebastian_k.
Maniphest Tasks: T86456
Differential Revision: https://developer.blender.org/D10963
- Optionally get the error as a single line.
- Support access the error as an allocated string.
- PyC_ExceptionBuffer_Simple was always printing to the `stdout` while
PyC_ExceptionBuffer didn't, now either print to the output.
Without this, callers are unable to do anything with the error string.
This commit cleans up the RNA names of select mirror operators so that
they are all "Select mirror".
This makes the select menu in edit/pose mode consistent regardless of
object type.
Differential Revision: https://developer.blender.org/D7356
This is especially useful when trying to add a node group instance, e.g. via
drag & drop from the Outliner or Asset Browser.
Previously this would just silently fail, with no information why. This is a
source of confusion, e.g. earlier, it took me a moment to realize I was
dragging a node group into itself, which failed of course.
Blender should always try to help the user with useful error messages.
Adds error messages like: "Nesting a node group inside of itself is not
allowed", "Not a compositor node tree", etc.
Adds a disabled hint return argument to node and node tree polling functions.
On error the hint is reported, or could even be shown in advance (e.g. if
checked via an operator poll option).
Differential Revision: https://developer.blender.org/D10422
Reviewed by: Jacques Lucke
Allow users to undo the effect of the "Generate Preview" operator in the
asset browser (`ED_OT_lib_id_generate_preview`). Without this, the
button is too dangerous.
A few strings describing RNA objects were wrong, including copy/paste errors, spelling and case.
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D10899
Changing window state using taskbar system menu could result in a titleless window.
Differential Revision: https://developer.blender.org/D10812
Reviewed by Ray Molenkamp
Before rBf674976edd88, the flag indicating whether a curve was 2D or 3D was
ignored by Surfaces objects.
So it can be said that Surfaces objects were always 3D.
We could remove updates to 2D on Surface objects, so the behavior is
identical to what it was before.
But this would also cause the return of `data.dimensions` to be misleading,
complicate the code a bit and add a micro overhead.
So the solution here is just to init all Surface objects as 3D.
Surface objects can now be constrained to 2D with the command:
```
data.dimensions = '2D'
```
The mixing function was designed to give correct results for Mix values of
-1, 0, and +1, but the behavior between these points was not linear. This is
unavoidable, because the function depends on both Mix and Mix^2 (by
multiplying value and mf) so they could not cancel out completely.
The new formula simply calculates the weighted sum without trying to invent
a smooth function.
Value for MixGlareOperation is now passed directly without scaling because
it is then easier to use.
Note that the previous formula performed max() twice for both input image
and the result, now there is just one max() per channel because the glare
input can't be negative.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7138
Related to {T77023}. When using many Denoise nodes the memory in OIDN
are allocated up front. A mutex could stall the process until. This
change will allocate the memory after it received the lock.
File output node always received the resolution from the first socket.
When that socket didn't had a link it would use a resolution of 0,0.
What lead to not saving the file at all.
This only effected Multi layer OpenEXR files.
This change would go over all the links to find the first valid
resolution.
In recent refactor the operator sockets were migrated from a std::list to a blender::Vector.
The way how the file output node created the sockets along mapping the sockets could
lead to storing incorrect pointers.
This patch fixes this by defining and mapping the sockets in separate loops.
This also fixes the issue that the width of the "Name" column
when viewing instances does not resize correctly.
Differential Revision: https://developer.blender.org/D10926
- Remove `make_quicky` as on modern systems linking is the main
bottleneck, and there isn't such a gain from partial builds.
- Remove enum generator as `PyC_StringEnumItems` & `EnumPropertyItem`
are used in most places to access enums from Python, otherwise macros
are added via macros.
Previously it was not possible to subdivide the last segment of a cyclic
stroke.
The fix makes sure that the correct number of new points is calculated
correctly and adds the new points to the last segment.
Reviewed By: antoniov
Maniphest Tasks: T87157
Differential Revision: https://developer.blender.org/D10902
Linked override were not properly ignored in some part of the code,
leading to invalid resync results in some cases with recursive overrides
(i.e. overrides of overrides).
Reported by Andy @eyecandy from the studio.
We do not want to copy exiting overrides data from linked ID when
creating its local override (be it either a template, or because linked
ID is itself an override of another lib data).
Note that this was not a very serious issue, would just cause some memory
leak since override data is re-created on newly copied local data
anyway.
These use cases have been very little tested so far, but both complex
production pipeline and future restrictive workflow will make them fairly
common...
Relying on only no-main for that was weak, and inn the end it turns out
we sometimes also need to ifnore override data during copy of Main
data-blocks.
NOTE: The new `LIB_ID_COPY_NO_LIB_OVERRIDE` is also added to the
`LIB_ID_COPY_LOCALIZE` set of flags.
NOTE: The fact that we may now copy liboverrides in some non-main cases
may cause issues in some cases, pretty impossible to track all possible
ones from reading the code... Would not expect too many problem though,
usages of `LIB_ID_CREATE_NO_MAIN` by itself are not so common.
The "orient_matrix" parameter was only used when contraint was defined.
This change will hardly be noticed by the user, but it can be useful for
addon developers.
Possibly resolves T85734.
Tell `FindOSL.cmake` where to find the shader header files. These have
moved from `${LIBDIR}/osl/shaders` to `${LIBDIR}/osl/share/OSL/shaders`
when OSL was upgraded (T85365).
Compostior relies heavilly on overridden methods. The override keyword has been added
in this module and is desired. The benefit of the override keyword is
that it reports an error when not applied to a (base) virtual method and report
what will not match when refactoring the code to be closer to blender style guide.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D10846
A `DataSource` provides columns for the spreadsheet to display.
Every column has a SpreadsheetColumnID as identifier. Columns
are not generated eagerly anymore, instead the main spreadsheet
code can request a column from a data source with an column
identifier. The column identifiers can be stored in DNA and allow us
to store persistent data per column.
On the user level the only thing that changes is that columns are
not shown in alphabetical order anymore. Instead, new columns
are always added on the left. The behavior can be changed,
however I'd prefer not to automate this too much currently. I think
we should just add operators to hide/reorder/resize columns soonish.
Differential Revision: https://developer.blender.org/D10901
Some object types don't have a geometry component in the depsgraph.
Before, there always was a warning printed when such an object was
used in the object info node (e.g. to get its location).
Points are drawn as half octahedron (aligned to the camera).
Getting the appropriate matrix for facing the camera would fail in in
orthographic view, points were not facing the camera (revealing their
missing other half octahedron)
Maniphest Tasks: T87150
Differential Revision: https://developer.blender.org/D10923
This is a minor change to add some plumbing code
to support custom geo nodes. This is working the
same way as the custom cycles and compositor nodes.
An example add-in is attached to D10784
Reviewed By: JacquesLucke
Differential Revision: http://developer.blender.org/D10784
Where possible, nodes in the "Geometry" category should support all
geometry component types. This adds support for volumes in the
recently added bounding box node, based on functions added in the
previous two commits.
Differential Revision: https://developer.blender.org/D10906
This commit splits of the function that generates a bounding box for a
volume into a new function, so that the min and max coordinate can
be retrieved from volume data without an object. Also some cleanup:
using the float3 type.
Often you need to apply a transformation to a grid without changing the
original, and it's necessary to avoid a deep copy of the actual data.
OpenVDB has a function to do this, this commit simply adds a wrapper
to transform and use that function with blender's `float4x4` data type.
Split from D10906
Previously only attributes of "real" geometry were displayed in
attribute search. This commit adds code to look through attributes
on instances and add those to the search drop-down too.
This required implementing the same sort of recursive traversal as
the realize instances code. The situation is a bit different though,
this can return early and doesn't need to keep track of transforms.
I added a limit so that it doesn't look through the attributes of
too many instanced geometry sets. I think this is important, since
this isn't a trivial operation and it could potentially happen for
every node in a large node tree. Currently the limit is set at 8
geometry sets, which I expect will be enough, since the set of
attributes is mostly not very unique anyway.
Fixes T86282
Diffrential Revision: https://developer.blender.org/D10919
The problem was that you could getting write access to a grid from a
`const Volume *` without breaking const correctness. I encountered this
when working on support for volumes in the bounding box node. For
geometry nodes there is an important distinction between getting data
"for read" and "for write", with the former returning a `const` version
of the data.
Also, for volumes it was necessary to cast away const, since all of
the relevant functions in `volume.cc` didn't have const versions. This
patch adds `const` in these places, distinguising between "for read"
and "for write" versions of functions where necessary.
The downside is that loading and unloading in the global volume cache
needs const write-access to some member variables. I see that as an
inherent problem that comes up with caching that never has a beautiful
solution anyway.
Some of the const-ness could probably be propogated futher in EEVEE
code, but I'll leave that out, since there is another level of caching.
Differential Revision: https://developer.blender.org/D10916
Fix `nullptr` redeference when setting 'orig_data' pointers on CoW copies,
by stopping the loop also when `element_cow == nullptr`. This avoids a
crash of Blender when the original list of pointers is longer than the
CoW list of pointers.
I've also added a `BLI_assert()` that checks for equal lengths of the
two `ListBase`s, so that problems like these aren't hidden away completely.
The root cause of the crash was actually a modifier that was assigned to
an object of the wrong type (an Armature object doesn't support modifiers).
This caused the list of modifiers on the CoW copy to be shorter than the
list of modifiers on the original Object. It's still a mystery how that
object got that modifier in the first place.
Broken by 04e1feb830
Caused by accidentaly moving `SEQ_proxy_rebuild_finish` outside of
`if (nseq->type == SEQ_TYPE_MOVIE)` condition in function
`SEQ_proxy_rebuild_context()`.
To check if an "is_mesh_verts_only" mesh, the overlay engine checks if the
mesh has no "totedge" and has "totvert".
However, sometimes this engine can check the wrong mesh since editmesh
works on `embm->mesh_eval_final`.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D10917
Previously, the spreadsheet editor could only show data of the original
and of the final evaluated object. Now it is possible to show the data
at some intermediate stages too.
For that the mode has to be set to "Node" in the spreadsheet editor.
Furthermore, the preview of a specific node has to be activated by
clicking the new icon in the header of geometry nodes.
The exact ui of this feature might be refined in upcoming commits.
It is already very useful for debugging node groups in it's current
state though.
Differential Revision: https://developer.blender.org/D10875
This adds the ability to get a selection list for both edit mode bones
and pose mode bones.
To do this the selection menu list logic had to be reworked a bit.
Before it only stored the names of objects. This might work will of
objects, however as stated in the code, it might fail for linked objects
(so multiple object can have the same name in some corner cases).
For bones it is a very common occurance where you can have multiple
armature that has the same bone names. So now it also stores the object
and bone pointers for this case.
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D10570
Fix T85796
The issue was that where_on_path uses a resampled curve to get the data
from the curve. This leads to disconnects between the curve the user
sees and the evaluated location data.
To fix this we simply use the actual curve data the user can see.
The older code needed a cleanup either way as there were hacks in other
parts of the code trying to work around some brokenness. This is now
fixed and we no longer need to clamp the evaluation range to 0-1 or make
helper functions to make it do what we actually want.
Reviewed By: Campbell, Sybren
Differential Revision: http://developer.blender.org/D10898
While the existing behavior worked as intended,
it wasn't possible to have two views on the same file at different
locations.
Since there isn't much use in having two views open at the same location
allow one view to be at a different scroll location.
UI edit-source and selecting a text data block now need explicit calls
to scroll to the cursor location.
Resolves T87284
Without legacy-undo, loading memfile undo only cleared edit-mode data
for mesh and armature object types.
This causes an assertion when loading edit-mode undo steps afterwards
for other object types as the existence of this data made entering
object mode fail.
Resolve this by freeing all objects types undo data from ED_editors_exit
Before this change, object-data could only have
one of the objects referencing it in edit-mode.
Reverting since multiple meshes in edit-mode (for the same object data)
isn't thread-safe as the evaluated edit-meshes are created in the
original edit-mesh, causing a crash updating the depsgraph
for linked duplicates, see: T86767.
While we could support this case, it's a bigger project without
significant benefits, so reinstate the limitation of only
allowing a single object to be in edit-mode for each object data.
This adds back the error from T85974 which caused an assertion
but didn't crash in release builds.
This reverts commit 2b60d7d09c.
This commit essentially touches to post-processing of collections and
objects after resync itself has been done, to ensure their proper
instantiation in the scene:
- Remove a lot of the process in resync case (resynced data are assumed
to be already instantiated in the scene, unlike override creation
case).
- For auto-resync, only do post-processing once after all overrides
have been resynced (doing it after each individual resynced was
causing a lot of instantiation glitches, with a lot of unwanted
extra objects and collections being added to the master collection).
It also deals in a much more reliable way with detection of objects
missing from the scene, by using the new `BKE_scene_objects_as_gset`
utils.
As a bonus this makes auto-resync process slightly faster (only by a few
percents, but that's always good to get).
This is internaly using the code of `BKE_scene_objects_iterator` and
steals its gset. More efficient than using that iterator directly to
rebuild another GSet...
In folded view, some type of data are listed as one icon per item,
others are 'compacted' as a single icon with a counter.
This commit adds bones (edit, normal and pose ones), pose groups and
vertex groups as 'compacted' ones in folded view.
Part of D10855.
This is a minimal, information-only view currently, listing by default
all the override data-blocks, with their user-edited override
properties.
System-generated overrides (like the overrides of pointers to other
override data-blocks) can be shown through a filter option.
Finally, potential info or warning messages from (auto-)resync propcess
are also shown, as an icon + tooltip next to the affected items.
Part of D10855.
This flag is set for liboverride IDs that are detected as no longer
needed by resync process, while having been user-edited, so
auto-handling code cannot silently delete them.
Exposing those to users will be part of the new incoming Override
Outliner view.
Part of D10855.
This removes a lot of unnecessary code that is generated by
the compiler automatically.
In very few cases, a defaulted destructor in a .cc file is
still necessary, because of forward declarations in the header.
I removed some defaulted virtual destructors, because they are not
necessary, when the parent class has a virtual destructor already.
Defaulted constructors are only necessary when there is another
constructor, but the class should still be default constructible.
Differential Revision: https://developer.blender.org/D10911
This code is incompatible with .blend files from subversion 16 and 17.
The ideal would be to create a new subversion when landed rBf674976edd88.
But for now, due to the delay, moving the code to the previous subversion
can solve it.
The function name was not very specific, this makes it clearer that it
works on instances rather than only real geometry. Also use `r_`
prefix for the return argument.
During review of D10730 it was discovered that the "uv" name causes
issues for cycles, which uses it as a default internal data name. While
that could be fixed in the future, there was no particular reason to use
"uv" instead of "uv_map", so we use the latter instead here, which
is consistent with the lowercase naming scheme chosen for attributes.
Some of the BMesh primitive operators have a lot of overhead due to the
fact that they use other operators like extrusion, removing doubles,
and rotation, to build each shape rather than filling arrays directly.
Implementing the primitives directly with the Mesh data structure is
much more efficient, since it's simple to fill the result data based
on the known inputs. It also allows also skip the conversion from BMesh
to Mesh after the calculations.
Speed matters more for procedural operations than for the existing
operators accessible from the add menu, since they will be executed
every evaluation rather than once before a destructive workflow.
| Shape | Before (ms) | After (ms) | Speedup (x times faster) |
| -------- | -------------| ------------| -------------------------|
| Cylinder | 1.1676 | 0.31327 | 3.72 |
| Cone | 4.5890 | 0.17762 | 25.8 |
| Sphere | 64213.3 | 13.595 | 4720 |
The downside of this change is that there will be two implementations
for these three primitives, in these nodes and in `bmo_primitive.c`.
One option would be re-implementing the BMesh primitives in terms of
this code, but that would require `BMesh` to depend on `Mesh`, which
is currently avoided. On the other hand, it will be easier to add new
features to these nodes like different fill types for the top and the
bottom of a cylinder, rings for a cylinder, and tagging the output with
boolean attributes. Another factor to consider is that the add mesh
object operator could be implemented with these nodes, just providing
more benefit for a faster implementation.
As a future cleanup, there is room to share code that generates the
"rings" topology between different nodes that generate meshes.
Differential Revision: https://developer.blender.org/D10730
When having a checkbox and a value both in one row together with an
animation decorator it is questionable whether the decorator should act
on animating the checkbox or the corresponding value. At the moment,
usage in modifiers does not seem to be very consistent:
Here the animation decorator works for animating the checkbox:
- `Build` (greasepencil) > `Factor` (this was reported and is changed in
this patch to act on the value instead of the checkbox)
- `DataTransfer` > `Topology Mapping` > `Max Distance` (this I guess
should also act on the value instead of the checkbox)
- `Edge Split` > `Edge Angle` (questionable)
- `Mirror` > `Merge` (questionable)
- `Screw` > `Merge` (questionable)
- `Wireframe` > `Crease Edges` (questionable)
Here the animation decorator works for animating the value:
- `VertexWeightEdit` > `Group Add/Remove Threshold`
- `Decimate` > `Symmetry`
So in this patch only the behavior in the greasepencil Build modifier UI
is changed, since I think it is quite obvious that one would more often
use the decorator for animating the factor value than for animating the
checkbox.
Maniphest Tasks: T87263
Differential Revision: https://developer.blender.org/D10910
This was added in 37b82a2d26, doesn't have much purpose and doesn't even do
anything in the vast majority of cases. It only affects custom properties. So
at the very least it shouldn't be shown for regular RNA property buttons. But
even for cases where it may do something, we couldn't find a good use-case. If
this operator has use-cases with some add-ons, the add-ons can expose it
differently, e.g. with a little 'x' icon next to the button, like it's done in
the keymap editor.
So removing the context menu entry now. Should this turn out to be a problem,
it can be brought back but much more selectively (only where it actually does
something). Or we could combine it with "Reset to Default".
Differential Revision: https://developer.blender.org/D8727
Reviewed by: Brecht Van Lommel, Hans Goudey
This patch fixes the issue in T86463 that colored collection icons in
the collection search box don't scale according to the zoom level.
The issue was caused by the drawing function for the colored
collection icons not allowing to change the size of the icons.
This patch addresses that by scaling the icon based on the drawing
width.
Reviewed By: #user_interface, natecraddock, Severin
Differential Revision: https://developer.blender.org/D10708
This is caused by rB9f323e9bf79f. When hover shortcuts are used,
we cannot use the modifier from the context (which will be the
active modifier), or they won't be hover shortcuts anymore!
There didn't use to be an editor-level "modifier" context variable,
which is why this worked before.
The fix is simple, just specify the modifier name for this particular
remove button.
Differential Revision: https://developer.blender.org/D10870
The default insert link callback for nodes was trying to move the
existing link away, since it didn't properly handle multi-input sockets
(though the problem wasn't exposed for the join node). We can basically
skip all of this "moving existing links" for multi-input sockets, unless
we are at the link limit.
This commit adds a simple node to output the min and max of an
axis-aligned bounding box for the input geometry, as well a rectangular
prism mesh created from these values for convenience.
The initial use case for this node is a "bounding box boolean", where
doing the boolean with just a bounding box could be signigicantly
faster, for cases like cutting a hole in a wall for a window. But it's
easy to imagine other cases where it could be useful.
This node supports mesh and point cloud data right now, volume support
will come as a separate patch. Also note that there is plenty of room
to improve the performance of this node through parallelization.
Differential Revision: https://developer.blender.org/D10420
Caused by typo in {rB76689e851700}.
Since Palettes and bGPDpalette are not the same size, this would not
only cause a crash in versioning code, but could only go downhill from
here on.
Maniphest Tasks: T87236
Differential Revision: https://developer.blender.org/D10903
The `InputAngle` function uses a flawed algorithm to fix precision issues.
This commit refactor the logic of that function by using BLI utilities.
Differential Revision: https://developer.blender.org/D10880
For debugging purposes to convert the internal state of the
NodeOperationBuilder to a graphviz.
Usage:
std::cout << *this << "\n";
Inside any method of the NodeOperationBuilder.
For curves, we need to tag the curve ID_RECALC_COPY_ON_WRITE for batch
cache update (same as in {rB24b2fe50f3ec}).
Maniphest Tasks: T86932
Differential Revision: https://developer.blender.org/D10826
Tweaking e.g. a field strength would then not use the curve/surface
normal anymore [but the object center instead].
If a curve has a forcefield with effector shape Curve (in code its shape
is PFIELD_SHAPE_SURFACE then), it wil get a SurfaceModifier.
Changing properties will free the SurfaceModifierData's bvhtree and mesh
And these dont get copied along when doing the CoW copy, these are
explicitly set to NULL. So this was also failing for meshes, not just
curves.
Without the mesh & bvhtree though, get_effector_data() will not set the
EffectorData's normal correctly (it is closest_point_on_surface() which
does this). And without the right EffectorData's normal, the effector
will of course work unexpected.
Going in and out of editmode made this work because that goes down this
route:
- BKE_object_handle_data_update
- BKE_displist_make_curveTypes
- do_makeDispListCurveTypes
- curve_calc_modifiers_post
-- BKE_mesh_new_nomain_from_curve_displist
-- we then have our desired updated mesh from the curve
-- this will also call the SurfaceModifiers deformVerts [which - given we
have a valid mesh - will update the bvhtree properly]
Also note that _animating_ the effector actually works, (have not done
the deep dive why this works, assume the curve geometry is updated in
this case)
So, now just carefully tag the curve ID_RECALC_GEOMETRY in
rna_FieldSettings_update for this specific case.
Maniphest Tasks: T84623
Differential Revision: https://developer.blender.org/D10092
Caused by rB0f95f51361d7.
Similar to T85515, T84717, T85543 and their related fixes.
In this case, add missing shading notifier as in rB9274bd457a25.
Reviewed By: brecht, lichtwerk
Maniphest Tasks: T86175
Differential Revision: https://developer.blender.org/D10604
Selecting random percentage would not reliably guarantee the precise
percentage of selected elements now randomize an index array instead
and use the precise number of elements from this array.
Note that this change has only been made to edit-mesh
and should be applied to all random selection operators.
Reading Area.type & ui_type printed an error from `pyrna_enum_to_py`
and returned an empty string.
As empty is a valid value, include it in the property enum list.
For Cycles, when enabling the Persistent Data option, the full render data
will be preserved from frame-to-frame in animation renders and between
re-renders of the scene. This means that any modifier evaluation, BVH
building, OpenGL vertex buffer uploads, etc, can be done only once for
unchanged objects. This comes at an increased memory cost.
Previously there option was named Persistent Images and had a more limited
impact on render time and memory.
When using multiple view layers, only data from a single view layer is
preserved to keep memory usage somewhat under control. However objects
shared between view layers are preserved, and so this can speedup such
renders as well, even single frame renders.
For Eevee and Workbench this option is not available, however these engines
will now always reuse the depsgraph for animation and multiple view layers.
This can significantly speed up rendering.
These engines do not support sharing the depsgraph between re-renders, due
to technical issues regarding OpenGL contexts. Support for this could be added
if those are solved, see the code comments for details.
* Move out of Simplify panel, into Light Paths > Fast Global Illumination
* Add separate boolan setting to enable/disable it separate from Simplify
* Default AO bounces to 1
* Put ambient occlusion distance in this panel as well
Since you can already specify a separate size for X and Y with the
grid node, it makes sense to be able to specify the size separately
for each axis also.
This also avoids some awkward math with a Transform node afterwards
when you want a specific size for each direction.
Versioning (except for animation and drivers) is handled in this commit.
Differential Revision: https://developer.blender.org/D10834
Materials used in grease pencil modifiers have the requirement that they
are already used on the object. In the UI dropdown, this restriction is
ensured by calling uiItemPointerR with appropriate searchptr and
searchpropname, so only giving the user the choice of materials already
used on the object.
From python though, it was still possible to assign materials outside of
this this restriction. This led to reports like T86981 [which have been
partially solved by clamping the material index in the modifier code to
be in the valid range].
Now make sure we dont assign "invalid" materials through RNA by
appropriate RNA pointer functions.
This also adds a proper warning (red, alert) in case of the LineArt
modifier if such a invalid material is still in the file [same as other
modifiers already do].
Differential Revision: https://developer.blender.org/D10873
This resulted in bad motion blur from alembic animation when imported
after rB83980506957c (because it was now OFF by default).
When imported in a version prior to rB83980506957c and saved, this was
still working fine.
Vertex interpolation option introduced in rBbab2260b59c7 was defaulting
to ON (correct) in that commit, but was lost in rB83980506957c.
Now switch this to ON by default again.
Note: if you have a file that was (incorrectly) imported with a version
after rB83980506957c you'll have to enable Vertex Interpolation option
on every MeshSequenceCache modifier by hand.
Maniphest Tasks: T86654
Differential Revision: https://developer.blender.org/D10876
Since these nodes are usually used for more basic operations and the
attribute nodes are used when more complexity is necessary, it makes
sense to give these nodes more accessible defaults-- hopefully this can
make learning about the core concepts of geometry nodes a bit easier.
Before this change, you could have the new sculpt symmetry code and the
older weight paint symmetry code active at the same time. This would
lead to users easily trashing their weigh paint data if they were not
careful when switching between modes.
Now the specific weight paint symmetry code is an exclusive toggle so
the user can't accidentally mirror strokes and vertex groups at the same
time. This also paves the way of supporting Y and Z symmetry in the
future for weight groups mirroring if we decide to add it in the future.
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D10426
The following primitives needed ME_EDGEDRAW, ME_EDGERENDER edge flags:
* Grid
* Circle
Set flags on the inside edges for grid and circle triangle fan (mesh primitive nodes)
so they are visible and selectable.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D10878
The main goal here is to remove the need for a C API to the code in
`mesh_boolean_convert.cc`. This is achieved by moving `MOD_boolean.c`
to C++ and making the necessary changes for it to compile. On top of
that there are some other slight simplifications possible to the
direct mesh boolean code: it doesn't need to copy the material
remaps, and the modifier code can use some other C++ types directly.
The old path that didn't skip the conversion to and from BMesh for
the exact solver was not yet removed from this file. At this point no
problems have came up in the new implementation, so it's safe
to remove it.
This commit improves the performance of the node by up to 40% in some
cases when there are only two input meshes, mainly by skipping the
conversion to and from BMesh.
When there are more than two input meshes (note the distinction from
"Geometries", a geometry set can have many mesh instances), the
performance is actually worse, since boolean currently always does
self intersection in that case. Theoretically this could be improved
in the boolean code, or another option is automatically realizing
instances for each input geometry set.
Another improvement is using multi-input sockets for the inputs, which
removes the need to have a separate boolean node for every operation,
which can hopefully simplify some node trees.
The changes necessary for transforms in `mesh_boolean_convert.cc` are
somewhat subtle; they come from the fact that the collecting the
geometry set instances already gives transforms in the local space
of the modifier object. There is also a very small amount of cleanup
to those lines, using `float4x4::identity()`.
This commit also fixes T87078, where overlapping difference meshes
makes the operation not work, though I haven't investigated why.
Differential Revision: https://developer.blender.org/D10599
Handle Lattice object the same way as Mesh objects. This is mostly to
execute the `object->data = data_eval;` line, which ensures that the
evaluated mesh is assigned to the evaluated object, and thus prevents
the lattice from un-deforming.
This fixes T86440
As the CU_2D flag is set for nurbs, a Curve can have 2D nurbs mixed with 3D.
But the UI does not allow this mixing. It updates all nurbs to 2D or 3D when set.
So remove this specific flag for nurbs.
This may break old files, since 2D curves with mixed 3D are now set as 3D.
Differential Revision: https://developer.blender.org/D10738
Previously, `node_name` was rarely actually a name of a node. It is set
correctly as node name in `ED_node_tree_push`. However, later on it
was overwritten by the name of an id data block in `node_draw_space`.
Now, the node_name stays the name of the "parent" node. Whereas
display_name is the name that will be displayed in the breadcrumbs.
With this change, the `node_name` can be used to reconstruct the
actual path from the root node tree to the currently visible tree.
Differential Revision: https://developer.blender.org/D10874
The node tree evaluator now calls a callback for every used socket with
its corresponding value(s). Right now the callback does nothing.
However, we can use it to collect attribute name hints, socket values
for debugging or data that will be displayed in the spreadsheet.
The main difficulty here was to also call the callback for sockets in
nodes that are not directly executed (such as group nodes, muted
nodes and reroutes).
No functional changes are expected.
After some back and forth with the GP module and some artists, this
option was deemed not that useful. The use case was considered too
obscure so we'll remove it.
It is still posible to have this functionality by using the vertex
weight modiifers or manually clamping the weights.
If any axis of the scale of an object was zero, transforming failed.
This was because `td->smtx` was set to a zero matrix.
orthogonalize_m3_zero_axes is used to fill in the zeroed axes.
Thanks to @filedescriptor for the initial fix: D10869.
Expose a this function to initialize any zeroed axes
to an orthogonal vector based on other non-zeroed axes.
This functionality already existed for `invert_m#_m#_safe_ortho`,
expose as a public function as it's useful to be able to fill in zeroed
axes of transformation matrices since they may be used in matrix
multiplication which would create degenerate matrices.
Compute a subset of the area light that actually affects the shading point
and only samples points within that.
It's not perfect as the real subset is a circle instead of a rectangle, and
the attenuation is not accounted for. However it massively reduces noise for
shading points near the area light anyway.
Ellipse shaped area lights do not have this importance sampling, but do not
have solid angle importance sampling either.
Ref D10594
This simulates the effect of a honeycomb or grid placed in front of a softbox.
In practice, it works by attenuating rays coming off-angle as a function of the
provided spread angle parameter.
Setting the parameter to 180 degrees poses no restrictions to the rays, making
the light behave the same way as before this patch.
The total light power is normalized based on the spread angle, so that the
light strength remains the same.
Differential Revision: https://developer.blender.org/D10594
The combination of building unit tests and WITH_CYCLES_NATIVE_ONLY did not
correctly detect when AVX/AVX2 support is available.
Differential Revision: https://developer.blender.org/D8201
Fix a segfault by setting the `batch_cache` pointer to `NULL` when copying
a Lattice. That way the copy can get its own batch cache when needed,
preventing a use-after-free.
This condition was in contradiction with comment for function
`ffmpeg_generic_seek_workaround()`.
I have noticed, that formats that seeked well used this workaround.
Problem was that I misunderstood code from `av_seek_frame()` - formats
with `read_seek()` function stil don't use generic seeking method.
This is defined in `seek_frame_internal()`
The "Paste Flipped" operator was missing its own tooltip.
This patch adds the tooltip by implementing the `get_description` callback for
`GRAPH_OT_paste` and `ACTION_OT_paste`.
Reviewed By: sybren
Maniphest Tasks: T87037
Differential Revision: https://developer.blender.org/D10859
`ffmpeg_generic_seek_workaround()` applied negative offset for seqrched
packet timestamp, but proxies always start from 0 and timestamp can be
negative.
Limit timestamp value to 0, because `av_seek_frame()` doesn't accept
negative timestamps and returns with error. This prevents seeking from
working correctly.
The RGN_TYPE_EXECUTE region was zero height - with the "Load & Save"
button drawing outside of those bounds - so it didn't respond to events.
This is because the region started off this size and does not change
with simply adding the buttons. Although it has RGN_FLAG_DYNAMIC_SIZE,
delayed reinit of regions is only currently supported on headers.
This gives the execute region an initial (minimum) vertical size but
also makes the region **hidden** by default.
- Showing Prefs as an editor among others it will show the header
but not the execute region.
- Showing the Prefs in a popup window, hides the header region
and shows the execute region.
Ref D10636
Make use of `StatementMacros` so Python structs are formatted correctly.
The comment about STRINGIFY doesn't seem to be valid anymore,
so this has been left out.
This was added in rB93aeb6b318a7, last changed in rB8f0a44a5d55d,
and removed in rB51b796ff1528. I assume it was a way for curves to
have split edges at corners. As far as I can tell it only ever worked
in Blender Internal, and that has been gone for years.
Another possible route here would be restoring this functionality,
but it's generally preferrable to reduce complexity in this
area of curve code than adding it back, especially in the context
of other improvements planned related to curves in geometry nodes.
Differential Revision: https://developer.blender.org/D9966
The index_data_map was not cleared when clearing a cache, so this would just append
the new correct data to the end of the array instead of overwriting it, which would
cause us to then use outdated indices.
For other "Attribute Name" fields we usually give a more specific name
that relates to what the attribute is actually used for, like "Mask" in
the point separate node. This is a similar situation, and would also
be consistent with the naming planned in D10506.
The geometry nodes modifier did not specify that it needs all custom data layers.
Therefore the modifier evaluation code tagged some layers so that they will not be
copied later on by calling `mesh_set_only_copy` in `mesh_calc_modifiers`.
When boolean's Object also has a modifier that depends back on
the target Object, a crash occurred.
In a case like this, BKE_modifier_get_evaluated_mesh_from_evaluated_object
returns NULL, so just have to protect against that case.
- Don't use `r_` prefix for an argument that's also read from
(this is meant for return only arguments).
- Rename variables to make it clear the distance is pixels,
using manhattan length measurement.
The new Cryptomatte workflow assumes that the picker is used in the new
workflow. The legacy node wasn't working as it would never find a
correct cryptomatte layer. This fix will use the color sampling like we
used to do.
WorkPackages struct was created when scheduled. This patch keeps the
WorkPackages around and stores additional data with the workpackages.
The speedup is to small to notice, but it is needed as preparation
to introduce a faster scheduling method.
Regression in 80cbbd2843.
Unfortunately keeping selection picking behavior as well as
supporting finding the nearest face within a radius requires an
inconsistency between x-ray and back-buffer selection that
doesn't work well using the current arguments.
Resolve by adding an argument that causes the input distance
to be ignored for back-buffer selection.
This is used by selection picking but not the knife tool.
This changes behavior for path-selection in face mode,
which now uses a margin for back-buffer selection.
From my own testing this doesn't seem to be a problem like it could be
for regular selection picking.
The tooltip while dragging a collection in Scene mode in the Outliner
was always "Link inside Collection" even if the action performed was
different. This was because the `collection_drop_init` set the
`from_collection` always to `NULL` if the Outliner display mode was
currently set to Scene.
Commit that introduced this issue:
rB0f54c3a9b75be8f8db9022fb0aeb0f8d0d4f0299
The fix removes the check of the display mode and only sets the
`from_collection` to `NULL` if the ctrl (linking) key is held.
Reviewed By: JacquesLucke
Maniphest Tasks: T86947
Differential Revision: https://developer.blender.org/D10864
When using the smooth operator, the thickness would not be
smoothed on the first iteration. This was becasue the inner loop
was set to run `r * 20` times but `r` starts at 0.
The fix makes sure that "Smooth Thickness" works on the first
iteration by using a fixed value of `20` as the loop limit. This
makes sure that for every iteration, we run the smoothing of the
thickness 20 more times.
Reviewed By: antoniov
Maniphest Tasks: T87082
Differential Revision: https://developer.blender.org/D10867
Use LISTBASE_FOREACH instead.
SEQ_CURRENT_BEGIN did null checks, so now these must be explicit.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D10823
Files that only contain a doc-string still included the last blank line,
since this normally contains code examples.
There are some cases where only a docstring exists
which made sphinx report warnings.
Use utility functions to decompose data paths and resolve the
RNA property from a data-path.
Replaces in-line string manipulation and RNA access.
This allows more complex data paths to be used, where previously string
literals in a data path could break the simple data-path handling logic.
Flag check for V3D_LOCK_CAMERA used boolean style assignment to a char,
which worked with this flag but could fail if other flags are added
that use this convention in the future.
- Add static type checks for values so any change to DNA types
will need to be made in the navigation gizmo too.
- Move camera lock check from `rv3d` to `v3d`,
as this isn't stored in the region data.
2D gizmo navigation button that toggles 'Lock Camera to View' while in Camera View.
Differential Revision: https://developer.blender.org/D10835
Reviewed by Campbell Barton
Now `ED_view3d_backbuf_depth_validate`, `ED_view3d_draw_depth` and
`ED_view3d_draw_depth_gpencil` are unified in `ED_view3d_depth_override`.
This new function replaces `ED_view3d_autodist_init`.
Also, since `ED_view3d_depth_update` depends on the render context, and
changing the context is a slow operation, that function also was removed,
and the depth buffer cached is now updated inside the new unified drawing
function when the "bool update_cache" parameter is true.
Finally `V3D_INVALID_BACKBUF` flag has been renamed and moved to
`runtime.flag`.
Differential revision: https://developer.blender.org/D10678
Introduced in rBce462fa1 but harmless since curretly only `StructRNA`
without `owner_id` have the `STRUCT_UNDO` flag cleared.
So this commit does not bring any functional changes but it will be
useful for {D10695}.
The problem was produced because the strokes were selected, but the loop to clear this flag before applying cutter was using unlocked layers only, and the protected layer flag was not reset.
Now, the flag is reset for all layers, locked and unlocked.
It was not possible to determine if a socket was multi input previously
with BPY. This patch exposes the flag as a read-only property of a node
socket. This is important for addons which automatically add connections
between nodes.
Differential Revision: https://developer.blender.org/D10847
Earlier last year, the shortcuts on hover were built as a way to regain
speed lost by removing the "Apply" and "Copy" buttons from the panel.
For the active modifier concept introduced for geometry nodes, the
shortcuts were changed to only affect the active modifier.
Based on feedback, this change slowed down many people's interaction
with the modifier stack so the UI team decided to return hover shortcuts
for modifier panels.
The downside of this change is that it looks like the active modifier is
"selected" and it could be confusing that the modifier shortcuts don't
apply to it. We can explore different ways to display the active status
to address this.
Ref T87012
Generic context operators now look-up the RNA properties to extract
their description (when it's available).
Add `bl_rna_utils.data_path.property_definition_from_data_path()`
to handle the details of accessing the RNA property definition.
When the strength is initially set to zero, the shader graph is
optimized out to remove any node which will not be executed because of
this, which removes pretty much every single node, except for the
output. As the graph is empty, the world shader is made invisible to
rays so it is not evaluated in the kernel.
However, when the strength is then modified, the Background is not
updated as the modification happens on the Shader Node and not on the
Background Node, so it is never tagged as modified.
To fix this, we need to tag the Background as modified when its shader
is also modified so the Kernel data is properly updated.
Regression caused by rBbbe6d44928235cd4a5cfbeaf1a1de78ed861bb92.
Separate tile buffers on all devices only need to exist when denoising is active (so any overlap
being rendered simultaneously does not write to the same memory region).
When denoising is not active they can be distributed like all other memory when peer
memory support is available.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D10858
Display the bone axes at the head (root) of the bone by default, instead
of the tail (tip), and add a slider so that it's possible to adjust this
position.
Versioning code is in place to ensure existing files behave the same
(axes shown at tail), whereas new Armatures will be using the new
default (axes shown at head).
Reviewed By: #animation_rigging, #user_interface, Severin, Sybren
Differential Revision: https://developer.blender.org/D7685
When using `bpy.data.actions[action_name, "nonexistant-library"]`,
use the term `filepath` instead of `name` in the error message.
Also increase the size to match the file path length.
Ref D10253
Remove the `BONE_UNKEYED` flag. It was only written (set/cleared) but
never actually read.
Also remove `framechange_poses_clear_unkeyed()` as its only function was
to clear the `BONE_UNKEYED` flag. It wasn't used anywhere either.
The only code that used the flag was the `extract_pose_from_action()`,
which was removed in 2869ce6cfa (2009).
No functional changes.
Minor changes preparing for snap gizmo inclusion.
- Extract `knife_snap_edge_in_angle` into a utility function.
- Check the snap vertex on closest edge instead of the face.
- Add MODE_INVOKING state.
- Remove unnecessary NULL checks.
- Control 'ignore_edge_snapping' while dragging instead of checking
dragging in `knife_snap_update_from_mval`.
Ref D8220
This enables ASAN support when used with VS 16.9
enable as usual in cmake with the WITH_COMPILER_ASAN
option, or when using make.bat just tag on `asan'
to the invocation, ie: `make lite 2019 asan`
MSVC: Asan support for 16.9
This enables ASAN support when used with VS 16.9
enable as usual in cmake with the WITH_COMPILER_ASAN
option, or when using make.bat just tag on `asan'
to the invocation, ie: `make lite 2019 asan`
Differential Revision: https://developer.blender.org/D7794
Reviewed By: brecht, sergey
`av_seek_frame()` failed to seek to nearest I-frame. This seems to be
a bug or not implemented feature in FFmpeg. Looks like same issue as
ticket https://trac.ffmpeg.org/ticket/1607 on ffmpeg tracker.
If seeking is done using format specific function (`read_seek2`)
field of `AVInputFormat` is set, `see av_seek_frame()`, use
`av_seek_frame()` function. Otherwise use wrapper that actively searches
for I-frame packet.
Searching is flexible and tries to do minimum amount of work. Currently
it is limited to equivalent of 25 frames, which may not be enough for
some files, but there may be files with no I-frames at all, so it is
best to keep this limit as low as possible. Previously this problem was
masked by preseek, which was hard-coded to 25 frames. This was removed
in rB88604b79b7d1.
If this approach would be unnecessary for some formats, in worst case
file would be seeked 2 times which is very fast, so there will be no
visible impact on performance.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10845
Add fit_method argument to new movie and image RNA API functions.
This argument is optional.
ref T86925
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10816
When adding images with operator, image file path is split into filename
and directory passed to load function in name and path fields of
SeqLoadData struct. This is because when loading images directory
and filenames are split.
RNA API function passes whole path in path filed.
Apart from loading API inconsistency, this causes initial image loading
to fail, so strip resolution is not set. Also name field of SeqLoadData
should be reserved for strip name.
Let operator code concatenate and split filepath when needed so loading
API can be consistent with RNA API and also between strip types.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10818
As the Snap Gizmo properties are used as return of snapping values and
therefore updated with each change, use callbacks to get these values
through RNA properties.
Differential Revision: https://developer.blender.org/D8525
Makes it slightly easier to test whether the installed module works
or not. Depends on D10656
Ref T86579
Reviewed By: mont29, campbellbarton
Differential Revision: https://developer.blender.org/D10665
Avoid CTest errors and exit codes due to test failures which depend
on Blender executable.
Ref T86579
Reviewed By: mont29, campbellbarton
Differential Revision: https://developer.blender.org/D10656
Old code's `install` step did not guarantee that all script files
will be copied from source folder to build folder _before_ copying from
build folder to site-packages. That caused incomplete installation.
Fixed by copying scripts etc., only once. Also match the behavior on
Linux: install to site-packages only if `WITH_INSTALL_PORTABLE` is OFF.
Also fix install and launch issues with Xcode.
When interpolate, the stroke order was not correct because it was assumed the GHash iter would return the items in the same order of insertion, but this is false.
Now, a list is used to keep the order of the strokes and the Hash is used to get the relationship between strokes as before.
The file was not really corrupted (as in, Blender did everything
correctly while saving). I only did not consider the case when
a .blend file is resaved in an older version before.
The issue was caused by handles not being written to the new mask
spline shape: it was always written as (0, 0), which was making the
handle calculation go wrong later on.
Solved by allocating a temporary array of bezier points and calculating
handles for them. While this is an extra array allocation it is only
done for a small amount of points and it is not in the critical code
path. Having this as an extra array helps to overcome a limitation of
the current mask shape API.
Additionally, disable the interpolation for the shape change:
the spline is brand new, there is nothing to be interpolated there.
When reading metadata from image files the metadata is trimmed to 1024.
For cryptomatte the metadata can contain json data and should not be
trimmed. Resulting additional checks in the manifest parser for
incomplete json data.
You could argue to add an exception for cryptomatte, but that would
still allows misuse. When the direction of this patch is accepted we
should consider removing `maxlen` from `IDP_AssignString` as it
doesn't seem to be used anywhere else.
Reviewed By: #images_movies, mont29, sergey
Differential Revision: https://developer.blender.org/D10825
Since a few releases it is possible to process Blenders images much
more effficiently than before thanks to the `foreach_get`/`foreach_set`
methods. This new template shows how those methods can be used together
with numpy.
Differential Revision: https://developer.blender.org/D9400
Initially this is a typo when solving merge conflict back in 2017
in commit rBf4140f2c8138.
The code was so for 3 years, so it is safer to assume that this is
the new expected design. The affected codepath only comes from the
BKE_object_modifier_update_subframe() which is discouraged from use
and have other issues.
Eventually those offending codepaths will be removed completely.
The grade-schema for now is more localized: remove ID_RECALC_ALL
which seems to be misused and is causing issues like the ones which
are described and discussed in T81340.
On user level there should be no measurable changes. In fact, no
functional changes at all are expected to happen.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D9220
This makes regular development more pleasant, because one does not have
to fix unrelated clang tidy mistakes when one is in the middle of something.
Before this change, I would usually turn clang-tidy off entirely, but then
forget to turn it on again.
This change has been agreed on by Sergey as well.
Fix the data management bug where evaluation of lattice objects would
write back to the CoW copy of the Lattice ID, even when that copy was
shared between objects.
Each lattice object evaluation now stores its own evaluated data copy
via `BKE_object_eval_assign_data()`.
Reviewed By: sergey
Maniphest Tasks: T78650
Differential Revision: https://developer.blender.org/D10790
Previously, the code expected the id property to have the `IDP_FLOAT` type.
However, when assigning a Python float (which is a double internally)
to an id property, it would change the type to `IDP_DOUBLE`.
The fix is to allow both types in the geometry nodes modifier.
UI hints should only be modified when the depsgraph is active.
Otherwise two threads evaluating the same object in different depsgraphs
can conflict with each other.
This is functionality that isn't accessible via the user interface. The
API allows the creation and modification of an override template that
holds rules that needs to be checked when overriding the asset.
The API is setup that it cannot be changed after creation. Later on when
the system is more mature we will allow changing overrides operations.
NOTE: This is an experimental feature and should not be used in productions.
Reviewed By: mont29, sebbas
Differential Revision: https://developer.blender.org/D10792
Respect the distance argument to EDBM_face_find_nearest,
when zero, sample a single pixel, otherwise sample a region.
Knife uses the selection-buffer to pick a face when the ray-cast failed.
This was meant to allow snapping to nearby faces however as the margin
was ignored, it was only used in edge cases where the ray-cast missed
but the pixel didn't.
Now the face-picking threshold is working as expected.
Note that other callers to EDBM_face_find_nearest have been updated
so set their distance argument to zero so this only impacts the knife.
Regular selection and path select could be modified separately if users
prefer this behavior.
Resolve logical error in edbm_shortest_path_pick_invoke
where any discrepancy between EDBM_unified_findnearest and
edbm_elem_find_nearest caused the active-object to be cleared.
While it's not a problem at the moment, using a larger threshold
for path picking exposes the error.
In this case, the cage location was left zeroed which was then
projected back onto the screen to find the nearest screen space
edge/vertex.
This made snapping to the vertex/edge fail in some corner-cases
where it was intended to work.
This is an implementation of Enhanced Subpixel Morphological Antialiasing (SMAA)
The algorithm was proposed by:
Jorge Jimenez, Jose I. Echevarria, Tiago Sousa, Diego Gutierrez
This node provides only SMAA 1x mode, so the operation will be done with no spatial
multisampling nor temporal supersampling. See Patch for comparisons.
The existing AA operation seems to be used only for binary images by some other nodes.
Using SMAA for binary images needs no important parameter such as "threshold", so we
perhaps can switch the operation to SMAA, though that changes existing behavior.
Notes:
1. The program code assumes the screen coordinates are DirectX style that the
vertical direction is upside-down, so "top" and "bottom" actually represent bottom
and top, respectively.
Thanks for Habib Gahbiche (zazizizou) to polish and finalize this patch.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D2411
Reduce the maximum number of queries to find the face under the
mouse cursor from 6x to 2x on cursor motion.
Calculating the screen-space detail could perform 2x look-ups
which have already been calculated.
Knife snapping logic assumed having a face under the cursor meant
the projected positions were set.
This is not always the case as failure to ray-cast uses the back-buffer
as a fallback.
For projection painting tools besides the `DRAW` tool:
- Don't show the texture from viewport stencil drawing.
- Don't show the texture panel.
Based on D10564 by @lichtwerk with own changes.
Check for indirect ID use after other simple user count checks are made.
Also assert ED_object_base_free_and_unlink_no_indirect_check object
argument isn't indirectly used.
The grease-pencil parent check was enabled when deleting objects,
when previously it was only done when unlinking.
While harmless, the previous logic is correct.
da160dc32d exposed a bug in
`BKE_id_multi_tagged_delete` causing a memory leak in soft-body that
made `physics_softbody` test fail.
Use a loop to remove ID's to keep tests working until T86992 is fixed.
Tracing images to grease pencil objects creates sometimes artifacts, as seen, for example, when tracing the attached image. {F9910821}
I have found the same behavior both in the 2.92 release and in the current 2.93 master.
The artifacts are caused by a variable that's not initialized or updated when finding a point tagged as POTRACE_CORNER.
This patch solves this issue.
Maniphest Tasks: T86967
Differential Revision: https://developer.blender.org/D10832
- comment added in struct `KnifeTool_OpData`
- struct pointer name `lst` updated to `list` ( Guess its more readable )
- `KNF_MODEL_IGNORE_SNAP_ON` updated to `KNF_MODAL_IGNORE_SNAP_ON`
- `KNF_MODEL_IGNORE_SNAP_OFF` updated to `KNF_MODAL_IGNORE_SNAP_OFF`
Ref D10824
The `object_delete_exec` lead to `BKE_library_ID_is_indirectly_used`
being called twice. With this patch deleting is around 20% faster.
Example when deleting 10000 objects:
Current: 35.6s
This patch: 18.8s (updated, last rev 29.7s)
Reviewed By: campbellbarton
Ref D9857
If window is maximized when toggling fullscreen, go back to maximized when done.
Differential Revision: https://developer.blender.org/D10813
Reviewed by Harley Acheson
Changes made:
* Add OpenMP linker flags.
* Copy the libomp.dylib to `2.93/lib/libomp.dylib`.
* Change the `LC_LOAD_DYLIB` item such that
the lib is found at `bpy.so/../../Resources/2.93/lib/libomp.dylib`.
Installation is done by D10664.
Reviewed By: #platform_macos, brecht
Maniphest Tasks: T86579
Differential Revision: https://developer.blender.org/D10657
When the window is already maximized allow covering Windows Taskbar when toggling fullscreen.
Differential Revision: https://developer.blender.org/D10811
Reviewed by Harley Acheson
One can only resync, reset, delete etc. locl overrides, linked ones are
basically regular linked IDs and fully not editable.
Reported by Demeter from the Studio, thanks.
Although "Grid" may not be techincally correct since a grid could be 3D,
it was decided to rename the "Plane" primtive to "Grid". The primitive
node allows subdivisions, so the name is more consistent with the
operator in the 3D view.
Ref T86819
This commit includes a file subversion bump for the versioning.
Changing to a more informative 'Weight Paint' rather than 'WPaint'.
Differential Revision: https://developer.blender.org/D9905
Reviewed by Julian Eisel
Change `float to boolean` and `int32 to boolean` to return false for zero and negative values.
This aligns with how artists would expect these values to work. This is in contrast to what a coder would expect. It was determined on blender.chat that this was a better default. This means that a negative float value would give a boolean false.
Change `Color4f to boolean` to return false for zero and negative grayscale values.
Likewise, for color to boolean, to account for negative value colors, the grayscale value would be used for determining if a colour was false or not.
See {T86454}
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10685
Activation distance for multi input sockets had different length
dependend of dpi factor. That caused jumping when activation distance
became shorter than snapping distance.
Fixed by removing activation distance and using same function
which is used to evaluate snapping.
Reviewer: Dalai Felinto
Differential Revision: https://developer.blender.org/D10809
Add a basic OSL shader that shows how inputs
and outputs work and do some simple math with
them.
This template is a happy medium between the
templates we already ship, empty_shader is a
little too bare, and the other templates are
a little "too much" and you end up having to
delete a whole bunch of stuff.
a great starting point for some experimentation!
Differential Revision: https://developer.blender.org/D9933
reviewed by: brecht
The "Enable physics for:" text makes no semantic sense- i.e.
"Enable physics for Fluid". Additionally, the leading text is just not
necessary, this section is just as clear without it.
Differential Revision: https://developer.blender.org/D10537
This patch adds support for the remaining operations of the Vector Math
node within Geometry Nodes. While the operations are already available
in the UI, they hadn't been implemented, yet. With this patch the node
uses the implementation that was added for the Attribute Vector Math
node - similar to how it's handled with the Math node and Attribute
Math node.
Differential Revision: https://developer.blender.org/D10650
Warnings in tooltips were using inconsistent formatting, some in
parantheses, some not, some in caps, others not, some on new lines,
some not, etc.
This patch uses a consistent new line and no capitals for these cases.
Differential Revision: https://developer.blender.org/D9904
Now that we have `ATTR_DOMAIN_AUTO`, it makes sense to use it to skip
automatic domain interpolation. This can make code that depends on the
non-interpolated domain of the attribute a bit simpler.
Added support for compositor tests. Compositor tests can be added, executed and viewed in a similar way to cycles
and other render engines tests.
Running test:
`ctest -R compositor`
Updating test:
`BLENDER_TEST_UPDATE=1 ctest -R compositor`
Viewing test results:
typically saved under `build_folder/tests/compositor/report.html`
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6334
The calculation of the 2D point was wrong when using orthographic mode.
Also small cleanup in float3 variable.
Differential Revision: https://developer.blender.org/D10828
SocketReader was added as an easier to understand interface on top of
the NodeOperation. It was implemented as a base class of the
NodeOperation and adds an additional hierarchy level.
Ths change replaces the abstract class with a typedef. In the end we
want to remove the typedef but will wait for some new nodes before doing
so.
Generalize threading settings in proxy building and use them for encoding
and decoding in general. Check codec capabilities, prefer FF_THREAD_FRAME
threading over FF_THREAD_SLICE and automatic thread count over setting it
explicitly.
ffmpeg-codecs man page suggests that threads option is global and used by
codecs, that supports this option. Form some tests I have done, it seems that
`av_dict_set_int(&codec_opts, "threads", BLI_system_thread_count(), 0)`
has same effect as
```
pCodecCtx->thread_count = BLI_system_thread_count();
pCodecCtx->thread_type = FF_THREAD_FRAME;
```
Looking at `ff_frame_thread_encoder_init()` code, these cases are not
equivalent. It is probably safer to leave threading setup on libavcodec than
setting up each codec threading individually.
From what I have read all over the internet, frame multithreading should be
faster than slice multithreading. Slice multithreading is mainly used for low
latency streaming.
When running Blender with --debug-ffmpeg it complains about
`pCodecCtx->thread_count = BLI_system_thread_count()` that using thread count
above 16 is not recommended. Using too many threads can negatively affect image
quality, but I am not sure if this is the case for decoding as well - see
https://streaminglearningcenter.com/blogs/ffmpeg-command-threads-how-it-affects-quality-and-performance.html
This is fine for proxies but may be undesirable for final renders.
Number of threads is limited by image size, because of size of motion vectors,
so if it is possible let libavcodec determine optimal thread count.
Performance difference:
Proxy building: None
Playback speed: 2x better on 1920x1080 sample h264 file
Scrubbing: Hard to quantify, but it's much more responsive
Rendering speed: None on 1920x1080 sample h264 file, there is improvement with codecs that do support FF_THREAD_FRAME for encoding like MPNG
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10791
Split seeking section of `ffmpeg_fetchibuf()` function into multiple
smaller functions.
Conditional statements are moved to own funtions with human readable
names, so code flow is more clear.
To remove one branch of seeking, first frame is now decoded by
scanning, which will do only one iteration. So nothing has technically
changed.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10638
This adds a Clamp node for Geometry Nodes Attributes.
Supports both Min-Max and Range clamp modes.
Float, Vector, Color and Int data types supported.
Reviewed By: HooglyBoogly, simonthommes
Differential Revision: https://developer.blender.org/D10526
As a rather premature optimization from rBbbe6d4492823, Object bounds
were only computed when either the Object or its Geometry were modified.
Prior to rB42198e9eb03b, this would work, as the Geometry was tagged as
modified if the Object's transform was also modified.
Since this tagging is not done anymore due to side effects, and since at
the time bounds are computed Objects were already processed and tag as
unmodified, the check on the modified status was always false.
For now remove this check, so the bounds are always unconditionally
updated. If this ever becomes a performance problem in large scenes with
motion blur, we will then try to find a way to nicely optimize it.
This would only affect BHV2 as OptiX and Embree handle object bounds
themselves.
When an addon has been removed, but its `.pyc` files are still there,
the Python module can still be loaded. However, because `__init__.py` is
missing, it becomes a namespace instead of a module, and its `__file__`
will be set to `None`. As a result, it's impossible to get the mtime
from the file (because there is none).
This should not influence any regularly uninstalled add-on, as that
would just remove the add-on's directory; I ran into the problem when
switching Git branches caused an add-on's Python files to disappear
while keeping the `__pycache__` directory around.
When rendering with cycles at some point the manifest is trimmed. This
leads to incomplete/corrupted metadata. This patch will make sure that
the manifest parser doesn't crash.
This solved the issue when the manifest is trimmed at the start of a
hash. Eg '"Name":"'.
This commit adds a node with a "Map Range" operation for attributes
just like the non-attribute version of the node. However, unlike the
regular version of the node, it also supports operations on vectors.
Differential Revision: https://developer.blender.org/D10344
This adds a new RNA method `Action.flip_with_pose(ob)` to flip the
action channels that control a pose.
The rest-pose is used to properly flip the bones transformation.
This is useful as a way to flip actions used in pose libraries,
so the same action need not be included for each side.
Reviewed By: sybren
Ref D10781
Support a cache for fast RNA path look-ups for RNA-path + index.
Unlike a regular hash lookup, this supports using a single lookup
for the RNA path which is then used to fill an array of F-curves.
Reviewed By: sybren
Ref D10781
This function returns an array of keyed frames with rounding,
to avoid duplicates caused by subtle floating point difference.
Reviewed By: sybren
Ref D10781
The recent commit that changed the size (rB83df3545246aada) left out
a few changed. This patch also adjusts the positioning and UV scale of
the generated plane accordingly.
Differential Revision: https://developer.blender.org/D10822
Purely local IDs would not always be used as proper barriers when
generating override hierarchy data, leading to imporperly trying to
resync override IDs from other hierarchies, which would break/cause
issues in case they would be duplicate overrides of the same linked
data.
Reported by Pablo from Sprite team, thanks.
We do not want to re-generate auto-overrides until everything that
needed to be resynced has been resynced. Otherwise it's a waste of time
and guaranteed loss of some override properties.
Mistake in rB9947f2095610 earlier today.
This will allow retrieving the instance groups from multiple geometry
sets and avoiding needing vectors of vectors to store the results.
This is useful when retrieving instances from a multi-input socket
of geometries.
select
In 'Set/Replace' mode this is not a problem, but 'Extend' or 'Subtract'
modes were useless with the current behavior.
The problem here is that 'node.select' fires before 'node.select_box'
(which is fine) but deselects immediately on click.
This issue has come up before in other editors, see
{T70457}
{rB395dfff103e1}
{rBa8ea1ea1b7d5}
Now delay deselection in empty space to mouse release (same as done in
before mentioned report).
also related:
ref T57918
ref T63994
Maniphest Task: T86867
Differential Revision: https://developer.blender.org/D10801
Replacing a hard-coded font size with font style widget size so it can be set by user.
Differential Revision: https://developer.blender.org/D10819
Reviewed by Dalai Felinto
account
UV coords are scaled by aspects (see UVsToTransData). This also applies
for the Cursor in the UV Editor which also means that for display and
when the cursor coords are flushed (new 'recalcData_cursor_image' was
added for this), these need to be converted each time.
Maniphest Tasks: T86796
Differential Revision: https://developer.blender.org/D10817
This flags moving the cursor in the Image Editor T_2D_EDIT with the
following benefits:
- dissallowing e.g. Z constraints
- improving the header display:
-- it should not use scene units
-- now respects if we are moving in pixel coords or not
part of upcoming fix for T86796
ref D10817
When subscribing to name-changes through the API,
the event doesn't trigger if the object is renamed in the outliner.
Fixed by publishing the RNA changes.
Reviewed By: lichtwerk
Ref D10732
This was only happening without an active object.
The "Operator Cheat Sheet" operator collects info about all operators,
and as part of that executes the callbacks to create dynamic enums. The
callback to enumerate the geometry operators (introduced in
rB370d6e50252b) attribute domains depends on a context object. If this
isn't available, we just have to return `DummyRNA_NULL_items`.
Maniphest Tasks: T86921
Differential Revision: https://developer.blender.org/D10814
Revert "Point users to new location of "Show Group Colors" option",
commit rB6ed6741ee35930bf81fad9a5eb6bb17eea168725.
These deprecation hints were intended for one release only, and thus can
be removed now.
This patch renames two domains:
* `Polygon` -> `Face`
* `Corner` -> `Face Corner`
For the change from `polygon` to `face` I did a "deep rename" where I updated
all (most?) cases where we refere to the attribute domain in code as well.
The change from `corner` to `face corner` is only a ui change. I did not see
a real need to update all code the code for that. It does not seem to improve
the code, more on the contrary.
Ref T86818.
Differential Revision: https://developer.blender.org/D10803
CacheFile writing code would not write generic ID data (call for it has
been missing since the initial commit, rB61050f75b13e).
While potentially affecting other areas (mostly CustomProperties/IDProperties),
this was a critical failure for liboverrides. Also added some workaround
code to allow opening broken files (though the override of the CacheFile
data-block will be lost).
This makes the buttons drawn on nodes for unconnected string and color
sockets draw with the correct 40% ratio for the label split rather than
the old 50% ratio not used elsewhere in Blender anymore. The benefit is
a cleaner look, because the button edges line up better with others, and
a bit more space to type in attribute names.
rBa8a92cd15a52 was adding external libraries includes to `INC`, which is
reserved to internal project includes.
`INC` does not allow duplicates, and when using system libs both PugiXML
and Haru headers are under the same path.
We would not add the "object line art" enum to the operator enum list,
if there were no active object in the scene.
This would make it impossible to call this operator from python code as
the enum would we hidden when we were not in a viewport context.
Always make the operator available, having no active object is not a
strict requirement for the operator to work, so expose it always.
Without `calc_object_remap` turned off in the conversion to and from
BMesh for the primitive nodes, the `CD_ORIGINDEX` custom data layer
has incorrect values. By using a different function to do the conversions,
we can avoid this problem.
Thanks to Jacques for finding the fix here.
Differential Revision: https://developer.blender.org/D10805
This error was produced because now it is possible to have several Lattice modifiers and the Bake was removing the lattice data of all modifiers.
Now the data is only recalculated and removed for the current modifier.
Also some cleanup of comments.
This patch adds support to export and import grease pencil in several formats.
Inlude:
* Export SVG
* Export PDF (always from camera view)
* Import SVG
The import and export only support solid colors and not gradients or textures.
Requires libharu and pugixml.
For importing SVG, the NanoSVG lib is used, but this does not require installation (just a .h file embedded in the project folder)
Example of PDF export: https://youtu.be/BMm0KeMJsI4
Reviewed By: #grease_pencil, HooglyBoogly
Maniphest Tasks: T83190, T79875, T83191, T83192
Differential Revision: https://developer.blender.org/D10482
Added a condition to the poll so that it ignores drag and drop on the button. The Paste Name operator is just not implemented. Doesn't work for shading nodes either.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D10769
Add missing call to ED_node_tag_update_nodetree which solves the missing update on initial drag.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D10769
Move Palettes type with other weird, not-really-data ID types (like
PaintCurves and Brushes), higher in the process.
Those preset-like types may use a lot of other ID types, but should only
be used by UI-related (and Scene, for tool settings) types.
Move Brushes type with other weird, not-really-data ID types (like
Palette and Brushes), higher in the process.
Those preset-like types may use a lot of other ID types, but should only
be used by UI-related (and Scene, for tool settings) types.
Move PaintCurve type with other weird, not-really-data ID types (like
Palette and Brushes), higher in the process.
Those preset-like types may use a lot of other ID types, but should only
be used by UI-related (and Scene, for tool settings) types.
Move `OB_GR` processing just after scenes, and before objects.
This is much more sensible in general, and fixes glitches in auto-resync
process of library overrides in particular.
Using the button context for operators is useful for other cases as well (where
the operator isn't the button operator itself). For example we'll need this for
the asset view UI template, where there will be additional operators that
should be able to act on button context.
Currently the procedural will add an entry to the cache for every frame
even if the data only changes seldomly. This means that in some cases we
will have duplicate data accross frames.
The cached data is now stored separately from the time information, and
an index is used to retrieve it based on time. This decoupling allows
for multiple frames to point to the same data.
To check if two arrays are the same, we compute their keys using the
Alembic library's routines (which is based on murmur3), and tell the
cache to reuse the last data if the keys match.
This can drastically reduce memory usage at the cost of more processing
time, although processing time is only increased if the topology may
change.
In order to update the BVH when only the transformations are changing,
we would tag the Object's Geometry as modified. However, when
displacement is used, and the vertices were not themselves modified,
this would cause us to redo the displacement on already displaced
vertices.
To fix this, use a specific update flag for detecting and notifying that
transformations were modified.
Regression caused by rBbbe6d44928235cd4a5cfbeaf1a1de78ed861bb92.
Make sure we have valid links and link pointers using
'ntreeUpdateTree()'.
Maniphest Tasks: T86314
Differential Revision: https://developer.blender.org/D10793
The problem happened when the selection only allowed "single_islands"
(only vertices are selected, no edges or faces).
The result of `is_zero_v3(v->no)` was erroneously being compared to `0.0f`
This commit corrects the wrong condition and optimizes it by adding a
earlier return when the islands don't need to be calculated.
(It also improves the code's readability by joining some variables in the
`struct TransIslandData`).
This adds a `BLI_assert_unreachable()` macro, that should be used instead
of `BLI_assert(false)` in many places.
* `BLI_assert_unreachable` provides more information than `BLI_assert(false)`
to people reading the code.
* `BLI_assert_unreachable` will print an error to `stderr` in a release build.
This makes it more likely that we will get bug reports when the assumptions
of a developer were wrong.
Differential Revision: https://developer.blender.org/D10780
- Use constexpr for better readability.
- Split in functions per backend.
- Split work scheduler global struct in smaller structs.
- Replaced std::vector with blender::Vector.
- Removed threading defines in COM_defines.h
Linked data should only be duplicated if relevant `eDupli_ID_Flags` flag
is set (`USER_DUP_LINKED_ID`), this is being taken care of by generic
`BKE_id_copy_for_duplicate` function, but for some reasons (?)
`BKE_object_duplicate` was directly using `BKE_id_copy` for itself...
Note that this had especially bad consequences when duplicating
overrides of collections...
It makes more sense to avoid mixing the primitives with other mesh
operations. We considered adding a "Mesh" prefix to the names too,
but decided to prioritize improvements to the node search menu instead,
and only consider that if there is an overlapping prefix name for
another data type.
The crash is caused by an out of bound access in the kernel due to
missing data update when a Volume's voxel data changes. Although the
previous bounding mesh is cleared, the Volume Node was not tagged as
modified, and therefore never rebuilt.
To fix this, tag the Geometries (not just Volumes, to be more robust) as
modified in Geometry.clear().
Regression caused by rBbbe6d44928235cd4a5cfbeaf1a1de78ed861bb92.
Crash occurs at `assert(builder->index_len < builder->max_index_len)`.
Non-bezier nurbs were being created with abnormal values causing the
causing edge count in the draw manager to be incorrect.
This commit also deduplicates and adds descriptions to the code.
Thanks @PratikPB2123 for pointing out where the error is.
Currently viewers and previews only display node trees that have at least one node with fixed resolution size. When all inputs are generated, nothing is displayed in most cases (RGB Node is displayed as a single pixel on previews). By generated I mean inputs not having resolution on their own, they create content dynamically given an output resolution.
This patch adds support for those cases by using an appropriate preferred resolution on Viewers/Previews which propagates to generated inputs as output resolution. Now:
- Viewers will display generated inputs with scene render resolution.
- Previews will display them with scene aspect ratio.
This is consistent with final render result and respects relative space.
The benefit for the user is being able to compose images without any input source. For example for creating mask images or simple backgrounds.
Reviewed By: Jeroen Bakker
Differential Revision: https://developer.blender.org/D10611
The goal of this patch is to remove the boilerplate code required to get
a string property that maps to an allocated char pointer in dna.
Previously, one to to provide three callbacks, all of which are not necessary
anymore for a simple string property.
Currently, when an empty string is assigned, the `set` function will always
allocate it as well, instead of assigning `NULL` to the pointer. Some structs
might support `NULL` while others don't, so this is the safer option for now.
Differential Revision: https://developer.blender.org/D10773
There were multiple cases that could lead to problems like moving meta
strip into itself or into it's children meta strips.
Print error string to console when invalid action is requested.
Cycles, Eevee, OSL, Geo, Attribute
Based on outdated refract patch D6619 by @cubic_sloth
`refract` and `faceforward` are standard functions in GLSL, OSL and Godot shader languages.
Adding these functions provides Blender shader artists access to these standard functions.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D10622
Currently, when a taper object is specified, the radius of the spline is
ignored. This patch adds a new option to control how the taper object
affect the effective radius of the spline. The option allow three modes
of operation:
- Override: The old method. The radius of the spline is ignored and
overridden.
- Multiply: The radius of the spline is multiplied by the taper radius.
- Add: The radius of the spline is added to the taper radius.
Ref D10779
Sorting of links on multi-input sockets where not recalculated after
using the knife operator. Added call to resort function before
cutting operator finishes.
Reviewer: Jacques Lucke
Differential Revision: https://developer.blender.org/D10783
- Rename:
`BKE_gpencil_object_material_get_index_name`, to
`BKE_gpencil_object_material_index_get_by_name`
Matching `BKE_gpencil_layer_get_by_name`.
- Move logic to ensure named materials into a new function:
`BKE_gpencil_object_material_ensure_by_name`
No need for a module to define a single panel, since this is an
object panel it can be included with other object panels.
If centralizing line-art properties is needed in the future,
this can be done in a `*_common` module.
In this case both the mirror object and object itself moving in time may
change the geometry and must be checked.
Differential Revision: https://developer.blender.org/D10757
In some multi-functions (such as a simple add function), the virtual method
call overhead to access array elements adds significant overhead. For these
simple functions it makes sense to generate optimized versions for different
types of virtual arrays. This is done by giving the compiler all the information
it needs to devirtualize virtual arrays.
In my benchmark this speeds up processing a lot of data with small function 2-3x.
This devirtualization should not be done for larger functions, because it increases
compile time and binary size, while providing a negilible performance benefit.
Following some discussion among the geometry nodes team, it was decided
that keeping the primitive nodes simpler and requiring a separate
transform node to move the generated geometry from the origin would
be better.
- It's more consistent with the current general idea of "building
block nodes"
- It makes more sense for the future when it will be possible to
use instancing to control the transforms.
- It reduces UI clutter when the controls are not necessary.
Although it works well in most cases, the algorithm to detect if a point
is within the limits of the camera does not work well in othographic mode.
This commit also adds the option `V3D_PROJ_TEST_CLIP_FAR` (currently unused).
Differential Revision: https://developer.blender.org/D10771
The issue was caused by the prefetch code having LOCK_MOVIECLIP lock
acquired while reading frames from the movie files. The need of the
lock was coming from the fact that `clip->anim` can not be accessed
from multiple threads, so that was guarded by a lock. The side effect
of this lock was that the main thread (from which drawing is happening)
did not have any chance passing through it in the cache code because
the prefetch happens so quickly.
The solution is to create a local copy of the clip with its own
anim handler, so that read can happen without such lock.
The prefetch is slower by an absolute number in seconds (within 10%
in tests here), but it is interactive now.
Re-adds a legacy document icon for macOS 10.14 Mojave that is
consistent with the system generated document icon on macOS 11
Big Sur. It uses the old-style document sheet icon, but includes the
file extension underneath the Blender icon (unlike the previous
legacy document icon that was removed in D10267).
Adds the missing description for the exported type identifier.
Finder now correctly displays “Blender File” instead of “data”
for Blender files.
Differential Revision: https://developer.blender.org/D10746
The root of the issue was caused by the PredictMarkerPosition()
always returning false when tracking backwards. This was making
it so tracker always had to run brute initialization, which is
an expensive operation.
From own timing here:
- Tracking forward takes 0.667637 seconds
- Tracking backward used to take 2.591856 seconds
- Tracking backward now takes 0.827724 seconds
This is a very nice speedup, although the tracking backwards is
still somewhat slower. Will be investigated further as part of
a regular development.
Code rebuilding/ensuring the sanity of the collection hierarchy was not
checking for a same collection being child of the same parent multiple
times.
This was already prevented to happen in code adding collections to other
collections, but not for the remapping case.
In collection/viewlayer synchronization code, in some cases, there are
extra unused view layer collections left in old list after all needed
ones have been moved to the new list.
Found while working on T86741.
Previously, different Random Float nodes would generate different values
depending on where they are in the node group hierarchy. This can be useful,
but should definitely not be the default behavior, because it is very inconsistent
with other nodes.
Previously, the signature of a `MultiFunction` was always embedded into the function.
There are two issues with that. First, `MFSignature` is relatively large, because it contains
multiple strings and vectors. Secondly, constructing it can add overhead that should not
be necessary, because often the same signature can be reused.
The solution is to only keep a pointer to a signature in `MultiFunction` that is set during
construction. Child classes are responsible for making sure that the signature lives
long enough. In most cases, the signature is either embedded into the child class or
it is allocated statically (and is only created once).
Added a first test case for review. This will be the base for future test cases.
The current API is sufficient for what is expected for such a low level API.
One concern is that you need to trigger a save in order to update the library overrides
structure. Not expected from TD/Dev point of view.
Test cases are very important when implementing restrictive mode as it is a second evaluation mode that
has impact on the (current) permissive mode.
Reviewed By: Sebastián Barschkis, Bastien Montagne
Differential Revision: https://developer.blender.org/D10747
The impact of translations on UI performances is neglectable, and this
gives better handling of some odd cases where original language of an
add-on is not English.
Currently 3 of the printf lines use the format specifier "%lu" for data
of type size_t instead of "%zu". While this works, this creates compiler
warnings.
This diff fixes those warnings by using the correct format specifier.
Tested using MSVC, but should be correct on any compliant compiler.
Reviewed By: Sebastian Parborg
Differential Revision: http://developer.blender.org/D10761
- Use `use_` prefix for boolean properties.
- Use `_all` instead of `_everything`,
following existing conventions and the properties UI text.
- Use `object_instances` instead of old term `dupli` / `duplication`.
- Use `clip_plane` instead of `clipping_boundaries`,
matching the RegionView3D property naming.
When a function is executed for many elements (e.g. per point) it is often the case
that some parameters are different for every element and other parameters are
the same (there are some more less common cases). To simplify writing such
functions one can use a "virtual array". This is a data structure that has a value
for every index, but might not be stored as an actual array internally. Instead, it
might be just a single value or is computed on the fly. There are various tradeoffs
involved when using this data structure which are mentioned in `BLI_virtual_array.hh`.
It is called "virtual", because it uses inheritance and virtual methods.
Furthermore, there is a new virtual vector array data structure, which is an array
of vectors. Both these types have corresponding generic variants, which can be used
when the data type is not known at compile time. This is typically the case when
building a somewhat generic execution system. The function system used these virtual
data structures before, but now they are more versatile.
I've done this refactor in preparation for the attribute processor and other features of
geometry nodes. I moved the typed virtual arrays to blenlib, so that they can be used
independent of the function system.
One open question for me is whether all the generic data structures (and `CPPType`)
should be moved to blenlib as well. They are well isolated and don't really contain
any business logic. That can be done later if necessary.
We cannot use `std::variant` yet, because not all of the compilers
we support have a working version of it yet. For now, I just replaced
it with multiple `std::option` which is good enough, because currently
`CellValue` is only used for the cells that are actually drawn in
the spreadsheet.
When the movie wasn't found, uninitialized values would be used for
the original width/height.
Also use int instead of float as the image size is stored as an int.
SetWindowPos must be called after SetWindowLongPtr in order to see changes to window frame style.
Differential Revision: https://developer.blender.org/D10756
Reviewed by Ray Molenkamp
Some generic algorithms from the standard library like `std::any_of`
did not work with all container and iterator types. To improve the
situation, this patch adds various type members to containers
and iterators.
Custom iterators for Set, Map and IndexRange now have an iterator
category, which soe algorithms require. IndexRange could become
a random access iterator, but adding all the missing methods can
be done when it is necessary.
The description was missing from the Quick Liquid operator.
The fix adds the following description:
"Make selected objects liquid"
Reviewed By: sebbas
Maniphest Tasks: T86746
Differential Revision: https://developer.blender.org/D10777
The offset when creating the keyframes was set to `frame_target + i` but
`i` starts iterating from the current frame number.
The fix uses just `i` as the frame number.
Reviewed By: antoniov
Maniphest Tasks: T86745
Differential Revision: https://developer.blender.org/D10772
When joining curves, the resulting curve will inherit the bevel depth of
the active curve, but the radii would stay the same which leads to
changed appearance when joining.
Now compensate for this taking the different bevel depths into account
(if present).
Was a feature request here (and I also think we had reports about this
-- which were usually turned down as not-a-bug):
https://blender.community/c/rightclickselect/bhhbbc/
Differential Revision: https://developer.blender.org/D10752
- Adding effect strip resulted in strip with no name
- Adding sound strip attempted to read `fit_method` RNA property,
that did not exist, causing error messages in console
These issues were introduced in bbb1936411.
SEQ_add_effect_strip used SeqLoadData.image.end_frame to set end
frame. This was mistake introduced in last refactoring patch.
Use effect data, not image data, when adding effect strips.
Reviewed By: sergey
Differential Revision: D10633
When transition effect is placed between 2 adjustment layer strips,
only first adjustment layer was rendered by effect.
Limit timeline_frame range to adjustment strip frame range.
This timeline configuration is technically invalid, because strips
should overlap when using transition effect. This was never restricted
and instead of producing no image, transition effect used first and
last frame of source strip. Many users got used to this "feature" so
I think it make sense to fix this case so it behaves like other strip
types.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10562
- Make properties alligned
- Add decorate to volume
- Add heading to Grease Pencil and Transparent
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D10663
Add option to override current frame whem transforming strip handles.
Option can be found in View menu of VSE preview, or in timeline when
using backdrop.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D10424
- Position text in center of image
- Increase default font size so it's more visible
- Increase font size limit
- Increase limit for location, so text can be scolled off screen
- Wrap text by default
- Tweak default box and shadow color
- Change text shadow position
- Text box no longer casts shadow
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D10571
Bold and italic fonts can be switched quickly by presing corresponding
button.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D10542
`SequenceElement` type `orig_height` and `orig_width` members were
set to incorrect size when using proxies and not set when strip was
added which caused value to be unset.
Since now image dimensions must be read when strip is created,
these members can be initialized. When proxies are used, do not set
original size since it is not guaranteed, that proxies are exact size.
These values are not guaranteed to be up to date or exact. They should
be used for strictly informative purposes.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D6506
This function can be used to create empty meta strip, which is not
straightforward when using operators. Very useful for import/export
scripts.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D10661
This function can be used to move strips into meta strips with no
side effects like change of selection state.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D10759
This visualization of nested node groups makes it easier to debug
some issues. Muted nodes, muted links, reroute nodes and unavailable
sockets are removed from the visualization to keep it clean.
Nested node groups are visualized using colored clusters.
The new clamping works by modifying the lamp internal radius which
then soften the light contribution.
However this does remove more light compare to the old solution.
This is because the clamp now affects the light over a much larger
distance since it is smoother. Old scene needs manual tweaking.
Soft surface shadows were already supported but now we support
soft shadows of the volume themselves.
This is only enabled if the light casts shadow and the scene soft
shadows toggle is enabled.
Previously area lights were just considered as point lights.
We now use a "most representative point" technique that make the
light shape appearant and gives more homogenous result.
This technique is quite cheap but it is not physically correct.
So I came up with a power function to have almost the same intensity
output as cycles in the general case.
Sun lights are treated as distant light source and need to gather
shadowing from the full frustum.
This might have performance impact on certain scenes.
This adds 2 new sliders for light objects that modulates the diffuse
light and the volume light intensities.
This also changes the way volume light is computed using point lamp
representation. We use "Point Light Attenuation Without Singularity"
from Cem Yuksel instead of the usual inverse square law.
Previously we could crash because we would not check if the modifier in
question actually was a line art modifier. We also did not query if the
modifier was disabled.
This patch adds data about instances generated by geometry nodes
to the spreadsheet. The transform data is decomposed into position,
rotation, and scale, and there is a name column to display the name
of the instanced object or collection.
This data is implemented specifically for the spreadsheet, because
we're not sure that we want to expose this data as attributes for the
use elsewhere.
Differential Revision: https://developer.blender.org/D10770
The point separate node was failing in situations where one of the
outputs was empty. In addition, the code was not structured very well.
This new implementation stores less temporary information, is more
geometry component type agnostic, and is more self-descriptive.
It also solves the problems mentioned above.
Fixes T86573
Differential Revision: https://developer.blender.org/D10764
Make options that are usually only useful in edge cases off by default.
These settings would requite extra work and thus the modifier evaluation
would be needlessly slower as most users do not need these options to be
on.
It caused some chaining errors when used in combination with image space
chaining. After some internal discussion, we realized it is not
useful as chaining in image space essentially does the same thing.
Instead of storing those in scne's master collection, which is fairly
annoying, we now add them to a (hidden) specific collection. Easy to
ignore, or check and cleanup.
This is generally what people expect when generating a cone. Note that
this translation currently happens after the rotation, but since the rotation
will likely be removed in the future, that won't be a problem for long.
This patch adds the remaining 6 interpolations for mesh domains.
The new interpolations are:
- Corner / point / polygon to edge
- Edge to corner / point / polygon
After this it is possible to adapt an attribute to and from every
mesh domain. This is simple to test with the "Attribute Convert" node.
Though, as a note for the future, there are still some improvements
possible to the interpolations, like lazily calculating values for the
interpolations where it's possible, and slightly improving the
algorithms used for some interpolations, like using corner angles
for polygon to point.
Differential Revision: https://developer.blender.org/D10765
This is not only potentially extremely expensive, it is also fairly
futile, and code is not designed to handle it currently anyway (could
easily end up in inifinite loops and other crashes).
- Remove use of evaluated poses, instead calculate transformations
into an array which is applied afterwards.
- Only update ID's for poses that have been changed.
This is simply a convenience when using this type. More similar
constructors can be added in the future when they are useful.
Differential Revision: https://developer.blender.org/D10714
Allow python access to the `reset_view` functionality which before
was only available through the menu. This was suggested for
consistency after D10561.
Differential Revision: https://developer.blender.org/D10595
The size in the transform matrices was extra, since it is also
passed as an argument to the BMesh operators.
Differential Revision: https://developer.blender.org/D10763
Previously even if the input goemetry set had no point cloud or no mesh
instances, `geometry_set_realize_instances` would create empty data.
This isn't necessarily bad, but it can complicate things down the line if
there are a bunch of empty components getting passed around.
This was reported for geometry nodes, but was true for all nodetrees
(e.g. after deleting the active node). Geometry node trees just made
this more obvious since they start without an active node to begin with.
Fix provided by @lone_noel, thx!
Maniphest Tasks: T86677
Differential Revision: https://developer.blender.org/D10762
Caused by {rB2917f550caa9} which renamed the entry in the toolsystem,
but not the corresponding keymap.
Maniphest Tasks: T86548
Differential Revision: https://developer.blender.org/D10725
Since {rB46aa70cb486d}, using `NC_SPACE | ND_SPACE_VIEW3D` as notifier is
restricted to space data as a reference. This was still used though for
RNA updates in other places (namely `rna_camera`, `rna_scene`,
`rna_animviz`), and passing NULL would automatically set the notifier
reference to the owner id. Above commit would happily filter these out,
leading to missing refreshes.
Now use more specific notifiers (in case of animviz a new
`ND_DRAW_ANIMVIZ` was added).
This was reported for Camera background images btw.
Fixes T86670.
Maniphest Tasks: T86670
Differential Revision: https://developer.blender.org/D10758
Data-block selectors (or other selectors using the
`UILayout.teamplate_search` or `UILayout.template_search_preview`)
in headers used a fixed size width for the name button. Often that meant
the text would be clipped to fit even though there was plenty of
whitespace surrounding the data-block selector.
Now the name button can increase in width with the contained string,
clamped to some arbitrary and quite big maximum (3 times the minimum
width).
We could further take the available space into account, to reduce the
need for scrolling in the header. But I don't think that is much of an
issue and the name clipping it would re-introduce would probably be more
annoying.
Only use non included objects for potential occlusion queries.
Don't calculate lines for them.
This fixes intersection lines appearing on objects not included by the
lineart modifier.
When doing a box selection in the dopesheet in the header area, the data block type was changed to annotation because the pointer was not usable and produced an unexpected result.
Thanks to @pullup for finding a way to reproduce the bug.
This introduces two functions to the blenloader module, here shown as
calls for brevity:
* `temp_lib_ctx = BLO_library_temp_load_id(real_main, blend_file_path, idcode, idname, reports);`
* Now the data in `temp_lib_ctx->temp_id` can be used (but ought not to
be not assigned to non-temp datablocks).
* `BLO_library_temp_free(temp_lib_ctx);`
The first loads a datablock from a blend file, and returns it as part of
a `struct TempLibraryContext`. This struct contains the temp-loaded ID,
as well as enough information to correctly free everything again.
Differential Revision: https://developer.blender.org/D10736
Transforms in certain cases
This was caused by wrong flag checking in {rB278011e44d43}, which just
seems to be a copy-paste error.
For example, enabeling 'Auto-Offset' in the View menu would lead to CM
being ignored.
Maniphest Tasks: T86219
Differential Revision: https://developer.blender.org/D10751
Following concerns raised in the commit that changed the name initially,
rB2e19509e60b39837, it makes more sense to keep the "Surface" name for
this node because it has a specific meaning that should not be confused
with other types of subdivision.
Changes include:
- Use `IFACE_` for UI labels set in the modifier panels
- Use a sub-sub-panel for transparency
- Fix grammar and spelling mistakes
- Use more natural user-friendly wording
- Make descriptions more specific and more useful
- Don't capitalize "line art" in descriptions (tooltips)
These changes are aimed at making the UI strings more consistent with
the rest of the UI and being more helpful to someone trying to understand
how to use the modifier.
Differential Revision: https://developer.blender.org/D10750
`NodeTreeRef` is a thin wrapper on top of `bNodeTree`. By default it
should not hide anything from the underlying `bNodeTree` (before this
it was hiding muted links).
For convenience some "derived" data is cached on sockets. For example
all the connected sockets when reroutes and muted links are ignored.
A nice side benefit of this refactor is that `NodeTreeRef` requires
less memory than before.
This makes more visible where ends each keyframe. To use, as we did before, full block sometimes looks hard to view where a keyframe ends.
Reviewed By: pepeland, mendio, Severin
Differential Revision: https://developer.blender.org/D10588
This patch adds the ability to mute individual wires in the node editor.
This is invoked like the cut links operator but with a new shortcut.
Mute = Ctrl + Alt
Cut = Ctrl
Dragging over wires will toggle the mute state for that wire.
The muted wires are drawn in red with a bar across the center.
Red is used in the nodes context to indicate invalid links, muted links and internal links.
When a wire is muted it exposes the original node buttons which are normally hidden when a wire is connected.
Downstream and upstream links connected using reroute nodes are also muted.
Outside scope of patch:
- Add support for pynodes e.g. Animation Nodes
- Requires minor change to check for muted links using the `is_muted` link property or the `is_linked` socket property.
Maniphest Tasks: T52659
Differential Revision: https://developer.blender.org/D2807
The "Operator Cheat Sheet" operator collects info about all operators, and as
part of that executes the callbacks to create dynamic enums. The callback to
enumerate the Outliner ID operations depends on Outliner context. If this isn't
available, it can just return a context-less version of the enum, that is, a
static enum with all available items. This was already done in case no context
is available at all.
This change shows the object or material name with the cursor when picking for a cryptomatte node.
Reviewed By: Julian Eisel
Differential Revision: https://developer.blender.org/D10705
Recursive restrict selection (hide/selectable flag) & renaming
edit-bones both used the active object, even when bones for another
non-active object were being operated on.
Bone renaming would rename a bone in the active object
(if that name exists).
This commit includes nodes to build the following primitives:
- Cone
- Cylinder
- Circle
- Cube
- UV Sphere
- Ico Sphere
- Line
- Plane/Grid
In general the inputs are the same as the corresponding operators
in the 3D view.
**Line Primitive**
The line primitive has two modes-- adding vertices between two end
points, or adding vertices each at an offset from the start point.
For the former mode, there is a choice between a vertex count
and a distance between each point.
**Plane Primitive**
This commit includes the "Plane" and "Grid" primitives as one node.
Generally primitives are named after the simpler form of the shape they
create (i.e. "Cone" can make some more complex shapes). Also, generally
you want to tweak the number of subdivisions anyway, so defaulting to
plane is not an inconvenience. And generally having fewer redundant
base primitives is better.
**Future Improvements**
A following patch proposes to improve the speed of the cylinder, cone,
and sphere primitives: D10730. Additional possible future improvements
would be adding subdivisions to the cube node and rings to the cone
and cylinder nodes.
Differential Revision: https://developer.blender.org/D10715
This adds the LineArt grease pencil modifier.
It takes objects or collections as input and generates various grease
pencil lines from these objects with the help of the active scene
camera. For example it can generate contour lines, intersection lines
and crease lines to name a few.
This is really useful as artists can then use 3D meshes to automatically
generate grease pencil lines for characters, enviroments or other
visualization purposes.
These lines can then be baked and edited as regular grease pencil lines.
Reviewed By: Sebastian Parborg, Antonio Vazquez, Matias Mendiola
Differential Revision: http://developer.blender.org/D8758
Add implicit `int32 to Color4f` conversion. Matches `int32 to float3` conversion logic.
This may not be the most useful conversion but prevents an error in the Attribute Convert node.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10686
Build proxies automatically when added to sequencer timeline and when
switching preview size.
This behavior can be disabled in user preferences.
Reviewed By: sergey, fsiddi
Differential Revision: https://developer.blender.org/D10363
Use h264 codec for output. This codec produces smaller files, can be
multithreaded and decodes even faster than MJPEG.
Quality setting 0-100 corresponds to "Lowest Quality" to
"Perceptually Lossless" in Blender's h264 encoding presets.
All available cores are used for decoding.
Same goes for decoding but only for codecs that supports this
(h264, vp9 seems to support this option out of th box as well).
Other decoders can probably be optimized in similar way, but threaded
encoding provides significant boost already.
I have tested variety of codecs, and all were transcoded properly.
Reviewed By: sergey, fsiddi
Differential Revision: https://developer.blender.org/D10731
- Remove Full Render size from VSE preview size. Use just 100% instead.
- Add Use Proxies checkbox to control whether proxies are used globally
- Move preview size to top so it is most prominent
- Set default to 100% preview size and use proxies
Reviewed By: sergey, fsiddi
Differential Revision: https://developer.blender.org/D10362
Problem is, when a collection is excluded from the scene, none of its
objects are technically instantiated.
This should not happen when *creating* an override, but can be fairly
common during resync process.
For now, use a lesser precise check in resync case, only relying on
object usercount. This might lead to some objects being left without any
collection in some rare weird case, but this cannot really be avoided
currently.
Allow downloading of source packages of Blender's dependencies, so that
it's easier to provide a "full source archive" that contains the blender
source + all dependencies archives. A `make` command for this will be
introduced soon.
This changes the deps builder slightly to be more flexible with the
origin of our source packages.
To support this a new CMake variable has been added called `PACKAGE_DIR`
where all sources archives will be stored.
default: a directory called `packages` in the build folder.
alternative-default: if a directory called `packages` exists in the
blender source folder that will be used. This is to support the "full
source archive" use case.
The download phase have been moved from the build phase to the configure
phase. Configure will download all sources validate the hashes while
downloading.
All `[depname].cmake` files have been changed to take a local
`file://[path_to_local_tarball]` path rather than a remote URI.
A second requirement was that there needed to be an option to grab the
sources from the blender SVN mirror rather than upstream. For this an
option has been added PACKAGE_USE_UPSTREAM_SOURCES (default ON). The
exact location in SVN still needs to be worked out, I tested with my
local webserver and codewise it checks out. The path that is in there
currently will not work (given there is no mirror there yet).
To build this mirror our local package caches can be used.
Reviewed By: lazydodo
Differential Revision: https://developer.blender.org/D10598
Changes to increase subdivision by one along both axis (X and Y)
For example with x_segment = 3 and y_segment = 3.
There should be 16 vertices ((3 + 1) * (3 + 1)) for correct
number of subdivisions. Currently they are 3 * 3 = 9 vertices.
Ref D10699
Seems like one of the example files on the cryptomatte github is
malformed and blender crashes when loading that file. This change will
try to load as much as possible from the manifest so it can still be
used.
This has also been reported to cryptomatte project.
Use a for loop that always begins with the active object,
instead of moving the active object in the array,
which failed when it's data already being handled.
While the existing logic could have been fixed,
it's simpler to change the loop order.
In the current implementation, cryptomatte passes are connected to the node
and elements are picked by using the eyedropper tool on a special pick channel.
This design has two disadvantages - both connecting all passes individually
and always having to switch to the picker channel are tedious.
With the new design, the user selects the RenderLayer or Image from which the
Cryptomatte layers are directly loaded (the type of pass is determined by an
enum). This allows the node to automatically detect all relevant passes.
Then, when using the eyedropper tool, the operator looks up the selected
coordinates from the picked Image, Node backdrop or Clip and reads the picked
object directly from the Renderlayer/Image, therefore allowing to pick in any
context (e.g. by clicking on the Combined pass in the Image Viewer). The
sampled color is looked up in the metadata and the actual name is stored
in the cryptomatte node. This also allows to remove a hash by just removing
the name from the matte id.
Technically there is some loss of flexibility because the Cryptomatte pass
inputs can no longer be connected to other nodes, but since any compositing
done on them is likely to break the Cryptomatte system anyways, this isn't
really a concern in practise.
In the future, this would also allow to automatically translate values to names
by looking up the value in the associated metadata of the input, or to get a
better visualization of overlapping areas in the Pick output since we could
blend colors now that the output doesn't have to contain the exact value.
Idea + Original patch: Lucas Stockner
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D3959
Callbacks used in `bpy.props` didn't hold a references to the functions
they used.
While this has been the case since early 2.5x it didn't cause any
problems as long as the class held a reference.
With Python 3.10 or when using `from __future__ import annotations`,
the annotations are no longer owned by the class once evaluated.
Resolve this by holding a reference in the module, which now supports
traverse & clear callbacks so the objects are visible to Python's
garbage collector.
Also refactor storage of Python data, moving from an array into a struct.
This is an implementation that is about 1.5-2.1 times faster. It gives a result
that is on average 6° different from the old implementation. The difference is
because normals (Ng, N, N') are not selected to be coplanar, but instead
reflection R is lifted the least amount and the N' is computed as a bisector.
Differential Revision: https://developer.blender.org/D10084
Offset the starting point of segments by a random amount to avoid the bounding
box shape affecting the result and creating artifacts.
Differential Revision: https://developer.blender.org/D10576
Static initialization order was not guaranteed to be correct for node base
types. Now wrap all initialization in accessor functions to ensure the order
is correct.
Did not cause any known bug on Linux/macOS/Windows, but showed up on this
platform.
The issue was caused by a prediction algorithm detecting tracking the
wrong way. Solved by passing tracking direction explicitly, so that
prediction will always happen correctly regardless of the state of the
Tracks context.
This was cause by the change of some epsilon values for reflections.
This commit changes the planar reflection tracing to have correct
handling of parallel rays and discard any self intersection with normal
screen raytrace.
The issue is that the `last_node_hovered_while_dragging_a_link` pointer is invalidated on undo.
The pointer does not have to be on the space runtime data, because it only needs to exist
as long as the operator is running.
Differential Revision: https://developer.blender.org/D10726
This exposes the `crease` attribute, that is used by the Subdivide Smooth node.
It is also the first attribute on the edge domain. Domain interpolations for the
edge domain have not been implemented yet.
Ref T86397.
Differential Revision: https://developer.blender.org/D10660
Attempt to work around some full-corruption cases created at the studio.
Not clear how those were created, so not really fixing anything here,
just detecting and 'solving' as best as possible some high corruption of
local overrides.
This is good to have in general anyway, might help prevent further
corruption to happen too.
is hidden from the viewport
Check visibilty (as done in workbench_cache_populate) in
overlay_edit_uv_cache_populate as well.
Maniphest Tasks: T86542
Differential Revision: https://developer.blender.org/D10724
This is a refactor and no functional changes are expected.
The goal is to make it simpler to add other data sources without having
to repeat the drawing code everywhere. Also, having the `CellValue` class
allows us to implement filtering and sorting in a more generic way.
There are two caveats of the current implementation which still need
to be resolved in a separate step:
* In theory the data on the original object can be editable in the spreadsheet.
* If a complex object is in edit mode, and its original data is displayed,
the drawing code can be slow, because the bmesh is converted to a mesh
every time. The proper solution is to draw the data from the bmesh directly.
This should become easier after an upcoming refactor.
Ref T86141.
Differential Revision: https://developer.blender.org/D10701
This implements the status bar as footer region in the
spreadsheet editor.
It shows the total number of rows and columns as well
as how many rows are actually visible (based on the filter).
The implementation stores the stats in a runtime struct during
drawing and the status bar reads from that struct.
Ref T86142.
Differential Revision: https://developer.blender.org/D10693
The shader was filtering everything but the selected color.
The fix inverts the check to make sure that color is selected.
Reviewed By: fclem
Maniphest Tasks: T86370
Differential Revision: https://developer.blender.org/D10670
- Split out auto-save file writing from timer code.
- Add wm_autosave_timer_begin so there are both begin & end functions.
- Replace WM_event_add_timer/WM_event_remove_timer with begin/end calls.
Previously all blend files included the path they were saved,
causing files distributed publicly to include users local paths.
This also included developers home directories for startup & userprefs
defaults & app-templates bundled with Blender.
Now recovery information is only written for auto-save & quit.blend
since this is the only time they're intended to be used.
I had done some experiments to see what Fast boolean did for material
mapping and thought it just used the same slot in the target as the
slot in the source. The truth is more complicated: if the target material
exists in any slot of the destination, we need to remap to whatever
slot has the matching material. I fixed Exact Boolean to do this.
Since the materials may be in the object, this means that BKE_mesh_boolean
had to get another argument, the remapping arrays.
I will note that the current behavior of Fast, and now Exact, is not ideal.
Ideally, if the source material does not exist in the target, a new material
slot should be created in the target and the source material copied there
(and incrementing the material's reference count). Maybe a future project,
but for now, I want the behavior of Exact to match that of Fast.
Accumulate error caused by the low amount of integration slices and
correct it for the low roughness surfaces.
This increases light leak but it is less distracting than dark fringe
everywhere.
This checks the generated key-map data matches the result of
re-exporting and re-importing.
This shows up various inconsistencies, including:
- Unused keymaps.
- Unknown/unused data in the keymap.
- Event arguments that don't make sense.
- Event values that don't match the event type
(tweak direction on keyboard event for example).
A block of code ran when `wm_keymap_update_flag` was non-zero,
replace this with explicit flag check since it wasn't
immediately obvious which flag needed to be set.
While this still isn't done by default on startup,
activating a key-config will load it as expected.
Needed to perform key-map loading tests in background mode.
This is necessary to make float sockets display a value with the unit
system. `PROP_DISTANCE` will be used quite a lot by the mesh primitives
geometry nodes patch.
Differential Revision: https://developer.blender.org/D10711
The shader was not using the horizon texture and was trying to
trace the AO again.
Also the depth reconstruction was off because now using the maxzBuffer.
Currently (in geometry nodes) you can delete the group input or group
output nodes with no way to get them back without copy and paste. This
adds them to the "Group" submenu of the add menu so at least there is
a way to add them back.
Additionally, these nodes are moved to the "Group" submenu for all node
editors. This makes sense since they are not like the other input or
output nodes, they really just relate to how groups are organized.
Differential Revision: https://developer.blender.org/D10241
This happens when the normal is too much deformed to give valid
reflection even after ensure_valid_reflection.
Cycles seems to not handle this case either so we just discard the
rays.
Simple divide by 0 error. The input radius was assumed to be safe
but is not when the user can scale it arbitrarly.
This also move the division out of the loop.
We now reuse 9 hitpoints from the neighboorhood using a blue noise
sample distribution as mentionned in the reference presentation.
Reusing more rays does however make some area a bit more blury.
The resulting noise is quite lower compared to previous implementation
which was only reusing 4 hits.
This make sure the rays are generated randomly from a fullres
texel center.
This creates more noise but increase the convergence when doing
half res tracing.
This split is to make code easier to manage and rename the files to
`effect_reflection_*` to avoid confusion.
Also this cleans up a bit of the branching mess in the trace shader.
This commit adds a `normal` attribute on the polygon domain. Since
normal data is derived data purely based off of the location of each
face's vertices, it is exposed as a read-only attribute. After
rB80f7f1070f17, this attribute can be interpolated to the other domains.
Since this attribute is a special case compared to the others, the
implementation subclasses `BuiltinAttributeProvider`. It's possible
there is a better way to abstract this. Something else might also
become apparent if we add similar read-only attributes.
See rB2966871a7a891bf36 for why this is preferred over the previous
implementation.
Differential Revision: https://developer.blender.org/D10677
After further thought, the implementation of the "normal" attribute
from D10541 is not the best approach to expose this data, mainly
because it blindly copied existing design rather than using the
best method in the context of the generalized attribute system.
In Blender, vertex normals are simply a cache of the average normals
from the surrounding / connected faces. Because we have automatic
interpolation between domains already, we don't need a special
`vertex_normal` attribute for this case, we can just let the
generalized interpolation do the hard work where necessary,
simplifying the set of built-in attributes to only include the
`normal` attribute from faces.
The fact that vertex normals are just a cache also raised another
issue, because the cache could be dirty, so mutex locks were
necessary to calculate normals. That isn't necessarily a problem,
but it's nice to avoid where possible.
Another downside of the current attribute naming is that after the
point distribute node there would be two normal attributes.
This commit reverts the `vertex_normal` attribute so that
it can be replaced by the implementation in D10677.
Differential Revision: https://developer.blender.org/D10676
The Attribute Convert node provides functionality to change attributes
between different domains and data types. Before it was impossible to
write to a UV Map attribute with the attribute math nodes since they
did not output a 2D vector type. This makes it possible to
"convert into" a UV map attribute.
The data type conversion uses the implicit conversions provided by
`\nodes\intern\node_tree_multi_function.cc`.
The `Auto` domain mode chooses the domain based on the following rules:
1. If the result attribute already exists, use that domain.
2. If the result attribute doesn't exist, use the source attribute domain.
3. Otherwise use the default domain (points).
See {T85700}
Differential Revision: https://developer.blender.org/D10624
The result value should be true if the input values are not zero.
Note that there is ongoing conversation about these conversions
in D10685. This is simply a fix though.
This operator initializes mask values for the entire mesh. It supports
different modes for initializing those values, and more will be added in
the future.
The initial version supports generating a random mask per vertex, Face
Sets or loose parts. These masks are useful for introducing variations
in the model using the filters (both shapes and colors).
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10679
Before only it was only possible interpolate frames of `Keyframe` type. Now all types except `Breakdown` can be used.
`Breakdown` cannot be used because it would be impossible interpolate two times because the extremes of the interpolation would change and the clean operator would not work.
There is no reason to hide the 'Scale' and 'Scale Randomness' options
for fluid particles that are rendered as 'Object'.
It is possible that hiding these options was just an oversight and
not intentional.
Add new function `blo_bhead_is_id_valid_type()` to correctly check the
blend file block type.
File block type codes have four bytes, and two of those are only in use
when these blocks contain ID datablocks (like `"OB\0\0"`). However,
there are other types defined in `BLO_blend_defs.h` that have four
bytes, like `TEST`, `ENDB`, etc.
The function `BKE_idtype_idcode_is_valid(short idcode)` was used to
check for ID datablocks while reading a blend file. This only takes a
2-byte parameter, and thus its result is invalid for the 4-byte codes.
For `TEST` blocks, it would actually consider it a `TE` block, which is
a valid identifier for a Texture. This caused the heap buffer overflow,
as the datablock is not a valid ID, and thus the bytes that were
expected to form an ID name actually encode something completely
different.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D10703
Sculpt undo relied on having a mode-changing undo step to properly
apply changes.
However this isn't the case with startup files or when mixing
global undo steps with sculpt (see T82851, also fixed).
Undo stepping logic follows image_undosys_step_decode_undo.
This is basically done by ignoring override operations from old override
affecting ID pointer properties, when the new (destination) one is not
NULL.
Fix T86501: New object added to overridden collection doesn't show up in linking file on Resync.
This is more of a work-around actually, since there is no real way to
fix the issue in a fully automated and consistent way, it is caused by
older blender files being saved with 'broken' overrides.
WARNING: This cannot ensure that some purposedly edited/overridden ID
pointer properties won't be lost in the process.
Code would end up freeing some of the newly created overrides, which
were assigned to the matching linked ID's `newid` pointer, accessed
again further down the code.
Note that this is not a normal expected situation, and it won't give a
proper resync result anyway, but it might happen in some complicated
corner cases, and also quite often when dealing with older .blend files.
In some cases (advanced, low-level), we also want to remap pointers like
`ID.newid` or `ID.orig_id`.
Only known case currently is `id_delete`, to avoid leaving potential access to freed memory. See next commit and T86501.
Baking to Vertex Colors would always bake to sculpt vertex colors (if
such a layer is present) even if those are not enabled in the
experimental preferences. This would bake without an error but leave the
user without a result to look in the viewport.
Now check if sculpt vertex colors are enabled and only bake to them in
that case.
Maniphest Tasks: T86455
Differential Revision: https://developer.blender.org/D10692
- Add notes on portability.
- Use encoding argument for all file IO.
- Use integer math to calculate major/minor version, while float
division should be fine prefer matching Blender.
This type, CacheLookupResult, holds the data for the current time, or an
explanation as to why no data is available (already loaded, or simply
nothing available). This is useful to document the behavior of the code
but also, in future changes, to respond appropriately for missing data.
Inside of the procedural, instances are AlembicObjects which point to
the AlembicObject that they instance.
In Alembic, an instance is an untyped Object pointing to the original
(instanced) one through its source path. During the archive traversal we
detect such instances and, only if the instanced object is asked to be
rendered, set the instance's AlembicObject to point to the original's
AlembicObject.
Cycles Object Nodes are created for each AlembicObject, but only for
non-instances are Geometries created, which are then shared between
Object Nodes. It is supposed, and expected, that all instances share the
same shaders, which will be set to be the ones found on the original
object.
As for caching, the data cache for an AlembicObject is only valid for
non-instances and should not be read to or from as it is implicitly
shared.
This will help support instancing as cache building is now decoupled
from the logic to update the Nodes' sockets as data (and cache) will
need to be shared by different Geometries somehow, and also simplify
implementing different data caching methods by centralizing this
operation.
We need to explicitely tag the Attribute and AttributeSet as modified if
we change or add/remove data. This is more of a bandaid until attributes
handling is refactored to be able to reuse routines from the Attribute
API.
This patch adds a node, that removes an attribute if possible,
otherwise it adds an error message.
Differential Revision: https://developer.blender.org/D10697
This patch fixes a visual bug related to connecting an output socket to
a Multi-Input Socket, that already has a link to that same output.
In this case, the drag link got a new index and snapped to a new
position. This path makes the drag link snap to the same position as the
first link between the two sockets.
Differential Revision: https://developer.blender.org/D10689
Caused by 46aa70cb48.
RNA would send property update notifiers with the owner ID as `reference` data.
Since above's commit we'd only send the notifiers to editors if the reference
data address matches the space's address. So editors wouldn't get the notifiers
at all.
The owner ID for space properties is always the screen AFAIK. So allow
notifiers with the screen as reference to be passed to editors as well, think
this is reasonable to do either way.
For example, steps to reproduce were:
* Open Asset Browser
* Mark some data-blocks of different types as assets (e.g. object & its
material)
* Switch between the categories in the Asset Browser. The asset list wouldn't
be updated.
When adding a notifier, `reference` data can be passed. The notifier system
uses this to filter out listeners, for example if data of a scene changes,
windows showing a different scene won't get the notifiers sent to their
listeners.
For the `NC_SPACE` notifiers, a number of places also passed the space as
`reference`, but that wasn't used at all. The notifier would still be sent to
all listeners in all windows (and the listeners didn't use it either). Causing
some unnecessary updates (e.g. see ed2c4825d3).
With this commit, passing a space will make sure the notifier is only sent to
that exact space. Some code seems to already have expected that to be the case.
However there were some cases that passed the space as `reference` without
reason, which would break with this commit (meaning they wouldn't redraw or
update correctly).
Corrected these so they don't pass the space anymore.
Steps to reproduce were:
* Open an Asset Browser
* "Mark Asset" on some data-block
* Change the Asset Browser into a different editor (not File Browser!)
* "Clear Asset" on the data-block again, or mark another asset
* Change back to the Asset Browser, it will show an outdated list
Now the file-browser reloads local file data after spaces were changed. Note
that the current notifier code doesn't limit the space-change notifiers to the
affected spaces, so changing any visible space will trigger this. That's an
issue to be fixed separately.
The check for undo-depth increment/decrement assumed a newly loaded
window manager would have a different pointer.
This broke bl_animation_fcurves test indirectly,
the change to undo-depth caused the redo panel to attempt to popup
in background mode - which isn't supported.
Now the pointer is unchanged, the undo-depth is assumed to match
the value used when calling the operator.
The undo-depth is now properly maintained between file loads,
which is an improvement on the original behavior which reset it.
Keep the pointer location from the initial window-manager
between file load operations.
This is needed as the Python API may hold references to keymaps for e.g.
which are transferred to the newly loaded window manager,
without their `PointerRNA.owner_id` fields being updated.
Since there is only ever one window manager, keep the memory at the same location so the Python ID pointers stay valid.
Reviewed By: mont29
Ref D10690
Previously many operations would run on file load, even if the file
did not load. Pre/post load handlers were called, timers canceled,
all undo data freed, editors exited ... etc.
Now keep the blend file in it's current state.
This simplifies updating this area of code as there is one less
possible situation to account for.
Currently file loading performs almost all reloading logic
even in the case loading the file fails, causing the file to be in
a state that isn't well defined: undo is cleared, timers are canceled &
scripts are re-registered.
- Don't set G.relbase_valid until the file is loaded.
- Remove unnecessary string pointer comparison.
- Remove unused filename being passed to 'setup_app_data'.
`BKE_lib_override_library_main_resync` uses
`LIB_TAG_LIB_OVERRIDE_NEED_RESYNC` tags set by RNA override apply code,
and perform detection for the remaining cases (those were new overrides
need to be created for data that was not present before in the library).
And then it actually resync all needed local overrides.
Part of T83811 & D10649.
We can fairly easily detect some resync-needed cases when applying the
overrides operations on a Pointer RNA property.
This should cover all cases where an existing override's ID pointer is
changed in its linked data.
We still have to add code to detect when a not-yet-overridden linked ID
needs to become overridden (because its relations to other data-blocks
changed in a way that requires it).
Part of T83811 & D10649.
This patch changes the `MEM_DEVICE_ONLY` type to only allocate on the device and fail if
that is not possible anymore because out-of-memory (since OptiX acceleration structures may
not be allocated in host memory). It also fixes high peak memory usage during OptiX
acceleration structure building.
Reviewed By: brecht
Maniphest Tasks: T85985
Differential Revision: https://developer.blender.org/D10535
Rather than letting the `TreeElementAnimData` constructor take an ID from which
we get the animation-data based on an assumption on how it's stored, let the
constructor take the animation-data directly. That way we further centralize
the assumptions on the data passed to the element creation to
`tree_element_create()`.
The following commit will add a comment explaining the plan to entirely get rid
of those assumptions in the future.
There was an implicit assumption that tree element types using the new code
design set their name on creation. Use an assert to make this explicit. See
f59ff9e03a, which was an error because of this broken assumption.
Caused by 2e221de4ce in combination with 4292bb060d.
In the former I forgot to set the name for NLA actions in the new code design,
in the latter I made it an assumtion that tree element types using the new
design set the name.
The following commit will make this assumption explicit with an assert.
When loading a file with an asset browser open, and it showed a custom asset
library that can't be found currently (e.g. because the file is from somebody
else), the `BLI_assert(0)` in `rna_FileAssetSelectParams_asset_library_get()`
would fail.
There was code to handle this case already, but unlike I thought it didn't run
right after file read. Now it does.
The multi-input-socket cannot be connected to the same socket twice currently.
However, it is still possible to achieve this using an intermediate reroute node.
In this case the origin socket should be listed twice in the `linked_sockets_` list.
Higher level functions can still deduplicate the list of they want.
This commit adds an operator to the RMB-menu "Copy Full Data Path“,
to copy the full RNA path to the clipboard. It aims to complement
"Copy Data Path“, which only copies the part of the path that is needed
for drivers, but for writing addons, etc. it is useful to have an option that
gives the full data path.
Similar patch have been submitted before, see D763 and D2746
This time I did not split the operator (as D2746) and does not contain the UI reorganization (as D763)
Note, the fixes from D2746 were committed in rB09eac0159db8 so that patch can be closed.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D10539
This makes the hit delta threshold dependant on the ray angle.
If the ray is more aligned with the view, its intersection
threshold gets bigger to avoid going through geometry.
This improves reflections and fix T86448 refraction issue.
We now have a new buffer to output reflection depth. This buffer is
only usefull for non planar SSR but we use it to tag the planar rays.
This also touch the raytrace algo for planars to avoid degenerate
lines on vert sharp reflections.
This changes the sampling routine to use the method described in
"A Simpler and Exact Sampling Routine for the GGXDistribution of Visible Normals"
by Eric Heitz.
http://jcgt.org/published/0007/04/01/slides.pdf
This avoids generating bad rays and thus improve noise level in screen-
space reflections / refraction.
This changes the hitBuffer to store `ReflectionDir * HitTime, invPdf`
just as the reference presentation.
This avoids issues when the hit refinement produce a coordinate that
does not land on the correct surface.
We now store the pdf in the same texture and store it inversed so we can
remove some ALU from the resolve shader.
This also rewrite the resolve shader to not be vectorized to improve
readability and scalability.
Since rBb279fef85d1a, the nodes properties for geometry nodes using a
texture are displayed in the Properties Editor.
It was possible to create recursive nodetrees when choosing the 'root'
nodegroup in the node link menu though leading to a crash.
Now poll if a group node of a particular node could actually be added to
the current tree.
Also check if the tree types actually match.
Maniphest Tasks: T86416
Differential Revision: https://developer.blender.org/D10671
This way we get a choice when we click on node links in the Properties
Editor.
This also changes some of the more permissive poll functions on some
nodes back to being "shading-only" (these were made permissive in
rBb78f2675d7e5 for simulation nodes, but have not found their way into
geometry nodes yet).
ref b279fef85d / T86416 / D10671
Maniphest Tasks: T86416
Differential Revision: https://developer.blender.org/D10673
The Blender/Cycles XYZ color space has a D65 white point instead of E, and
this was not correctly accounted for both in the OpenColor config reading code
and the bundled config.
This meant that since the OpenColorIO v2 upgrade, the Linear ACES color space
was not working correctly, and other OpenColorIO configs defining
aces_interchange were not interpreted correctly.
This conversion works the same way as a combination of the existing
color to float3 to boolean conversions, so the boolean result will be
false if the color is black, otherwise true, and the alpha is ignored.
This Patch removes the auto sorting from Multi-Input Sockets and allows
the links to be sorted by drag and drop instead.
As a minor related change, it fixes the drawing of the mute line to
connect to the first input instead of the socket's center.
This implements the MVP for the new spreadsheet editor (T85879). The functionality
is still very limited, but it proved to be useful already. A more complete picture
of where we want to go with the new editor can be found in T86279.
Supported features:
* Show point attributes of evaluated meshes (no original data, no other domains,
no other geometry types, yet). Since only meshes are supported right now, the
output of the Point Distribute is not shown, because it is a point cloud.
* Only show data for selected vertices when the mesh is in edit mode.
Different parts of Blender keep track of selection state and original-indices with
varying degrees of success. Therefore, when the selected-only filter is used, the
result might be a bit confusing when using some modifiers or nodes. This will
be improved in the future.
* All data is readonly. Since only evaluated data is displayed currently, it has to
be readonly. However, this is not an inherent limitation of the spreadsheet editor.
In the future editable data will be displayed as well.
Some boilerplate code for the new editor has been committed before in
rB9cb5f0a2282a7a84f7f8636b43a32bdc04b51cd5.
It would be good to let the spreadsheet editor mature for a couple of weeks as part
of the geometry nodes project. Then other modules are invited to show their own data
in the new editor!
Differential Revision: https://developer.blender.org/D10566
Note, this does not allow users to connect the same socket more than once to
a multi-input-socket in the UI. However, the situation could still happen when
using node muting.
Properties Editor
Since rBb279fef85d1a, the nodes properties for geometry nodes using a
texture are displayed in the Properties Editor.
rB85421c4fab02 added an attribute search button, but this was missing
still (gave just the regular text button) if this was displayed in the
Properties Editor.
ref b279fef85d / T86416 / D10671 / D10673
Maniphest Tasks: T86416
Differential Revision: https://developer.blender.org/D10674
Using EEVEE (as well as some other actions like saving the file or
tweaking mesh parameters) can cause a PBVH rebuild. The different sculpt
tools can store PBVH nodes or other related data in their caches, so
this data becomes invalid if the PBVH rebuilds during evaluation. This
ensures that the PBVH does not rebuild while the cache of Expand is
being used, like it already happens for brushes and filters.
Reviewed By: JacquesLucke
Maniphest Tasks: T86422
Differential Revision: https://developer.blender.org/D10675
Adds toggle to graph editor (View->Show Extrapolation). When disabled,
then fcurves only draw over the keyframe range. For baked fcurves and
ghost fcurves, the range is all sampled points.
It is intended for frequent use so anybody could assign hotkey or add
to quick favorites that's why GE-View is the best place for it.
Show Extrapolation is the default.
Reviewed By: sybren, Stan1, looch
Differential Revision: http://developer.blender.org/D10442
No functional changes.
This function replaces some of the logic in
`DRW_select_buffer_find_nearest_to_point` that traverses a buffer in a
spiral way to search for a closer pixel (not the closest).
Differential Revision: https://developer.blender.org/D10548
This commit adds interpolation to and from attribute on the polygon
domain. Interpolation is done automatically when a node uses attributes
on two different domains. The following are the new interpolations and
corresponding simple test cases:
- **Point to Polygon**: Painting the shade smooth attribute in weight
paint mode
- **Polygon to Point**: Moving points along a normal based on the
material index
- **Polygon to Corner**: Scaling a UV map with the material index
before sampling a texture
{F9881516}
This is also necessary for an improved implementation of the `normal`
attribute.
Differential Revision: https://developer.blender.org/D10393
This adds an extra option to the Face Sets Init operator to initialize
individual Face Sets based on the current Face Sets boundaries.
In particular, this is useful for splitting the patterns created by
Expand into individual Face Sets for further editing.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10608
Document the fact that `bpy.types.KeyMaps.new()` will not create a new
keymap but instead return an existing one, if one with the given
name/space/region already exists.
No functional changes.
This patch exposes the "Shade Smooth" value as a boolean attribute.
This setting is exposed as a check-box in the mesh data properties,
but the value is actually stored for every face, allowing some faces
to be shaded smooth with a simple per-face control.
One bonus, this allows at least a workaround to the lack of control
of whether meshes created by nodes are shaded smooth or not: just use
an attribute fill node.
Differential Revision: https://developer.blender.org/D10538
Auto frees cryptomatte session when it the pointer is collected from the
stack.
Reviewed By: Jacques Lucke
Differential Revision: https://developer.blender.org/D10667
Use member initializer list for constructor.
Use `this->` for member function.
Introduced in rBef53859d24a9720882e3ca6c5415faefec6fb82c
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D10653
Prior to rB99a7c917eab7, Shift + D was used to set detail size for both
constant and relative detail (using radial control). The commit added an
improved operator for doing this for constant detail (showing the
triangle grid representation), but left the user without a shortcut to
do this for relative detail.
Interestingly rB99a7c917eab7 only changed this for the Blender keymap,
the Industy Compatible keymap still has the "old" entry.
This patch changes both keymaps to have both entries.
For user experience, the real change here is to have both available on
one 'primary' shortcut (Shift+D), the improved
'dyntopo_detail_size_edit' operator will now act on all possible cases.
If it deals with constant detail, it acts as before, if it deals with
relative detail etc, it will fallback to the "old" way of doing it via
radial control instead. I assume this adresses what was stated in
rB99a7c917eab7: "Deciding if both detail sizes can be unified needs a
separate discussion"
Also, move dyntopo_detail_size_edit to sculpt_detail.c
Fixes T83828
Maniphest Tasks: T83828
Differential Revision: https://developer.blender.org/D9871
A few changes to make this consistent with other modifier panels:
- Title case for UI labels
- Use property split (and therefore decorators)
- Declare sublayout variables after getting modifier info
This was meant to be part of rB9ce950daabbf, but the change dropped from
the set at some point in the process of updating and committing.
Sorry for the noise.
In {rBb279fef85d1a} the button that displays a texture in a Properties
Editor texture tab was added for geometry nodes.
Same commit will actually show them for Brush textures as well (but
disabled -- because the Texture users dont match).
This task is for finanlizing proper support for Brush textures as well.
There was originally a separate patch for this (see {D9813}) but most of
it was already implemented by above commit.
**what this solves**
from the default startup file:
- go to any sculpt or paint mode and add a texture to your brush
- observe the button to edit this texture in the Properties editor is
greyed out
{F9860470}
There are two possible solutions:
- [1] call the texture template for the brush `texture_slot` texture
(instead of the brush 'texture') from the python UI code, this is then
working in harmony how ButsTextureUser works for brushes
- [2] tweak the way `ButsTextureUser` works (dont rely on
`RNA_BrushTextureSlot` there)
This patch implements the first solution.
Since `brush.texture_slot` is `br->mtex` RNA wrapped and `brush.texture`
is `br->mtex.tex` RNA wrapped, this really comes down to doing the same
thing. I checked that creating a new texture and unlinking/deleting will
have the same results even though they take slightly different code
paths: assignment and NULLing the pointers are working on the same (see
above) and RNA update callbacks also do the same [even though in
different functions]:
- brush.texture will do rna_Brush_main_tex_update
- brush.texture_slot.texture will do rna_TextureSlotTexture_update /
rna_TextureSlot_update
(only difference here is an additional DEG relations update in the case
of texture_slot which should not do harm)
Differential Revision: https://developer.blender.org/D10626
This makes the following changes to the name of the two
geometry nodes subvision nodes:
- `Subdivision Surface` -> `Subdivide Smooth`
- `Subdivision Surface Simple` -> `Subdivide`
Most of the benefit is that the names are shorter, but it also better
mirrors the naming of operations in edit mode, and phrases the names
more like actions. This was discussed with the geometry nodes team.
When you have many distinct objects, in an Eevee render then the shadow caster gets exponentially slower as the number of (distinct) objects increase.
This is because of the way that frontbuffer->bbox (EEVEE_BoundBox array) and the associated frontbuffer->update bitmap are resized.
Currently the resizing is done by reserving space for SH_CASTER_ALLOC_CHUNK (32) objects at a time.
When the number of objects is large, then the MEM_reallocN() gets progressively slower because it must memcpy the entire bbox/bitmap data to the new memory chunk.
And there will be a lot of *memcpy* operations for a large scene.
(Obviously there are a significant number of memory allocations/deallocations too - though this would be linear performance.)
I've switched to doubling the frontbuffer->alloc_count (buffer capacity) instead of adding SH_CASTER_ALLOC_CHUNK (32). As I understand this is the only way to eliminate exponential slowdown. Just increasing the size of SH_CASTER_ALLOC_CHUNK would still result in exponential slowdown eventually.
In other changes, the "+ 1" in this expression is not necessary.
if (id + 1 >= frontbuffer->alloc_count)
The buffer is 0-based. So when the buffer is initially allocated then id values from bbox[0] to bbox[31] are valid. Hence when frontbuffer->count == frontbuffer->alloc_count, is when the resizing should be triggered.
As it stands the "+ 1" results in resizing the buffer, when there is still capacity for one more object in the buffer.
I've changed the initial buffer allocation to use MEM_mallocN() instead of MEM_callocN(). The difference is that malloc() doesn't memset buffer (with zeros) when allocated. I've checked the code where new bbox records are created, and it does not rely on the buffer being initialised with zeros.
Anyway, isn't calloc() safer than using malloc()? Well no, it's actually the opposite in this case. Every time the buffer size is increased, it is done using realloc(), and this does not zero-out the uniniitialised portion of the buffer. So the code would break if it was modified to assume that the buffer contains zeros. Hence I believe initialising the buffer using calloc() could be misleading to a new developer.
Won't this result in increased memory usage? Yes, if you have millions of objects in your scene, then you are potentially using up-to twice the memory for the shadow caster. (However if you have millions of objects in your scene you're probably finding the Eevee render times a slow.)
Note that once the render gets going the frontbuffer bbox/bitmap will be shrunk to a multiple of SH_CASTER_ALLOC_CHUNK (32), therefore releasing the overallocation of memory.
As observed in Visual Studio - this appears to be prior to peak memory usage anyway.
Note this shrinking is executed in EEVEE_shadows_update() - during the first render sample pass. If necessary you could consider shrinking the buffer immediately after the EEVEE_shadows_caster_register() has done it's work. (Note however it appears you would need to add that function call is multiple places.)
Anyway as per the bug report I raised, I observed a 5% increase in peak-memory. And I'm unclear whether this difference in memory is due to me running the debug build. (It could be that there is no difference because of the shrinking.)
I couldn't figure out how the shadow caster backbuffer works. I see that EEVEE_shadows_init() has an explicit command to swap the front/back buffers. However this is done only when the buffers are first initialised and there is nothing in there yet. In my testing, the backbuffer->count was always zero, EEVEE_shadows_update() never did anything with the backbuffer.
Finally this problem is most evident when using Geometry Nodes or a Particle System to instantiate many objects. Objects created through say the array modifier do not cause any issues because it is considered one object by the shadow caster.
Reviewed By: #eevee_viewport, fclem
Differential Revision: https://developer.blender.org/D10631
This commit refactors the point distribute node to skip realizing
the instances created by the point instance node or the collection
and object info nodes. Realizing instances is not necessary here
because it copies all the mesh data and and interpolates all
attributes from the instances when this operation does not
need to modify the input geometry at all.
In the tree leaves test file this patch improves the performance of
the node by about 14%. That's not very much, the gain is likely larger
for more complicated input instances with more attributes (especially
attributes on different domains, where interpolation would be necessary
to join all of the instances). Another possible performance improvement
would be to parallelize the code in this node where possible.
The point distribution code unfortunately gets quite a bit more
complicated because it has to handle the complexity of having many
inputs instead of just one.
Note that this commit changes the randomness of the distribution
in some cases, as if the seed input had changed.
Differential Revision: https://developer.blender.org/D10596
Splits up `tree_element_id.cc`/`tree_element_id.hh`.
If we move all ID types into this one file, it will become rather big. Smaller
files are probably easier to work with. We could still keep small classes like
`TreeElementIDLibrary` in the general file, don't mind really, but this creates
separate files for that too.
These files can contain more than just the "base" tree element types. E.g. the
class for the view-layer base element can also contain the class for the
view-layer elements. Otherwise we'd end up with like >50 files for the
individual types, most of them very small.
So just give the files a general name and put the related classes in there.
Continuation of work in 2e221de4ce, 249e4df110 and 3a907e7425.
Adds new tree-element classes for the scene-ID, scene collections, scene
objects, and the view layers base.
There is some more temporary stuff in here, which can be removed once we're
further along with the porting. Noted that in comments.
This is a Python version of the existing `make_source_archive.sh`
script. IMO it's easier to read, and it'll also be easier to extend with
the necessary functionality for D10598.
The number of lines of code is larger than `make_source_archive.sh`, but
it has considerably less invocations of `awk` ;-) And also the filtering
is integrated, instead of forking out to Python to prevent certain files
to be included in the tarball.
Reviewed By: dfelinto, campbellbarton
Differential Revision: https://developer.blender.org/D10629
Currently the implementations specific to each geometry type are in
the same file. This makes it difficult to tell which code is generic
for all component types and which is specific to a certain type.
The two files, `attribute_access.cc`, and `geometry_set.cc` are
also getting quite long.
This commit splits up the implementation for every geometry component,
and adds an internal header file for the common parts of the attribute
access code. This was discussed with Jacques Lucke.
The actual sample count is rounded up to a multiple of 4 because we
sample 4 horizons directions.
Changing this setting forces the shader to recompile (because using a
GPU_constant).
This just bypass the occlusion computation if there is no occlusion
data. This avoids weird looking occlusion due to the screen space
geometric normal reconstruction.
The sampling is now optimum with every samples being at least one pixel
appart. Also use a squared repartition to improve the sampling near the
center.
This also removes the thickness heuristic since it seems to remove
a lot of details and bias the AO too much.
This is a major rewrite that improves the screen space raytracing
a little bit.
This also decouple ray preparation from raytracing to be reuse in other
part of the code.
This changes a few things:
- Reflections have lower grazing angle failure
- Reflections have less self intersection issues
- Contact shadows are now fully opaque (faster)
Unrelated but some self intersection / incorrect bad rays are caused by
the ray reconstruction technique used by the SSR. This is not fixed by
this commit but I added a TODO.
This removes the need for per mipmap scalling factor and trilinear interpolation
issues. We pad the texture so that all mipmaps have pixels in the next mip.
This simplifies the downsampling shader too.
This also change the SSR radiance buffer as well in the same fashion.
This was reported as opening alembic caches ignoring the
'use_relative_paths' preference, but this operator just did not have
this setting. Fortunately, adding this is just a simple switch.
Maniphest Tasks: T86063
Differential Revision: https://developer.blender.org/D10568
This adds the initial boilerplate code that is required to introduce
the new spreadsheet editor. The editor is still hidden from the ui.
It can be made visible by undoing the change in `rna_screen.c`.
This patch does not contain any business logic for the spreadsheet editor.
Differential Revision: https://developer.blender.org/D10645
Ref T86279.
Add operator `FILE_OT_view_selected` to the file browser (and thus also
to the asset browser) that scrolls selected files into view.
This includes the active file, even though it is not selected. In
certain cases the active file can loose its selected state (clicking
next to it, or refreshing the asset browser), but then it's still shown
in the right-hand sidebar. Because of this, I found it important to take
it into account when scrolling.
This also includes a change to the keymaps:
- Blender default: {key NUMPAD_PERIOD} is removed from the "reload"
operator, and assigned to the new "view selected files" operator. The
reload operator was already doubly bound, and now {key R} is the only
remaining hotkey for it.
- Industry compatible: {key F} is assigned to the new "view selected
files" operator. This is consistent with the other "view selected"
operators in other editors.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D10583
The Tool stores desired dimensions as `scale` and thus had to half the
scale again in `make_prim_init()` because by default all primitives are
created at a size of 2 in blender.
This worked, but:
- [1] it logged something like size=2, scale=2,2,2 for a 2x2x2 cube
[which does not sound right, it should be size=2 scale=1,1,1]
- [2] it had to make an exception for the case scale is exactly 1x1x1
[this happens when the property is not set specifically, e.g. adding
primitives from the menu]
-- this exception led to double sized primitives being created when the
tool asked for exact dimensions of 1x1x1
Now - instead of compensating in `make_prim_init()` - do this earlier in
the tool itself, see `view3d_interactive_add_modal`, this fixes the bug
and now also correctly logs size=2 scale 0.5,0.5,0.5 for a 1x1x1 cube.
Maniphest Tasks: T86347
Differential Revision: https://developer.blender.org/D10632
projectors
Make this clear in property UI descriptions and deactivate aspect &
scale fields if no camera projectors are present.
ref T86268
Maniphest Tasks: T86268
Differential Revision: https://developer.blender.org/D10634
This adds support for creating a `BlendFile` (internally called `Main`),
which is limited to a context.
Temporary data can now be created which can then use
`.libraries.load()` the same as with `bpy.data`.
To prevent errors caused by mixing the temporary ID's with data in
`bpy.data` they are tagged as temporary so they can't be assigned
to properties, however they can be passed as arguments to functions.
Reviewed By: mont29, sybren
Ref D10612
The handle of a drawing callback can be removed within the drawing function itself.
This causes `var = (type)(((Link *)(var))->next` to read an invalid memory value in C.
Something in this update broke the floor() function in CUDA, instead use
floorf() like we do everywhere else in the kernel code. Thanks to Ray
Molenkamp for identifying the solution.
It looks like we never generated correct icon previews for images with
float_rects (non-8bit-images). Images from the report were 16bit pngs.
In this case, `icon_preview_startjob` would return early (it only
checked if the ImBuf `rect` was NULL -- which is the case if it has a
`rect_float` instead). This is not neccessary since `icon_copy_rect` is
perfectly capable of taking float rects.
Now correct the check and only return early if both `rect` & `rect_float`
are NULL.
note: this will not refresh icon previews from existing files
automatically. For this, use File > Data Previews > Clear Data-Block
Previews.
Maniphest Tasks: T86210
Differential Revision: https://developer.blender.org/D10601
Caused by {rB85421c4fab02}.
Above commit treated `SOCK_RGBA` and `SOCK_STRING` the same in
`std_node_socket_draw`.
That would turn a RGBA button into a text button (for attribute search),
leading to trouble.
Note these were just treated the same prior to above commit because both
were doing the layout split.
Now just give RGBA sockets their own case.
Maniphest Tasks: T86373
Differential Revision: https://developer.blender.org/D10646
This reverts commit 7a34bd7c28.
Broke windows build. Can apparently fix with /Zc:preprocessor flag
for windows but need a Windows dev to make that fix.
Since {rB7a6b46aac56b}, particle systems were named "ParticleSettings"
by default, same as particle settings themselves. These are not the same
thing and their names should reflect that.
Issue came up in T86366.
Now name them "ParticleSystem" by default, name uniqueness is preserved
for both system and settings.
Maniphest Tasks: T86366
Differential Revision: https://developer.blender.org/D10641
But this time the root cause. Writing undo files is done in a separate
thread. This patch moved the updating of the matte_id when the user
actually changes the matte.
The commit rB6f63417b500d that made exact boolean work on meshes
with holes (like Suzanne) unfortunately dramatically slowed things
down on other non-manifold meshes that don't have holes and didn't
need the per-triangle insideness test.
This adds a hole_tolerant parameter, false by default, that the user
can enable to get good results on non-manifold meshes with holes.
Using false for this parameter speeds up the time from 90 seconds
to 10 seconds on an example with 1.2M triangles.
The missing update has two sources:
The TimeSampling used for looking up transformations in the cache was
uninitialized. To fix this, simply use the TimeSampling from the last
transformation in the hierarchy (that is the object's parent), which
should also contain the time information for all of its parents.
The objects are not tagged for update when their trasformations change.
The Exact boolean used in the cell fracture addon incorrectly
kept some outside faces: due to some raycasts going into open
eye socket then out of the head, leading to one ray direction
(out of 8) saying the face was inside the head. The current
code allowed 1 of 8 rays only as "inside" to accommodate the
case of a plane used in boolean to bisect. But this cell fracture
case needs more confidence of being inside. So changed the
test for intersection to require at least 3 of 8 rays to be inside.
Maybe the number of rays to indicate insideness should be exposed
as an option, to allow user tuning according to the degree of
"non-volumeness" of the arguments, but will try at least for now
to magically guess the right value of the rays-inside threshold.
Note: all of this only for the case where the arguments are not
all PWN (approx: manifold). The all-PWN case doesn't use raycast.
Instead of returning a raw pointer, `LinearAllocator.construct(...)` now returns
a `destruct_ptr`, which is similar to `unique_ptr`, but does not deallocate
the memory and only calls the destructor instead.
The main change is that large allocations are done separately now.
Also, buffers that small allocations are packed into, have a maximum
size now. Using larger buffers does not really provider performance
benefits, but increases wasted memory.
This is a complete rewrite of the derived node tree data structure.
It is a much thinner abstraction about `NodeTreeRef` than before.
This gives the user of the derived node tree more control and allows
for greater introspection capabilities (e.g. before muted nodes were
completely abstracted away; this was convenient, but came with
limitations).
Another nice benefit of the new structure is that it is much cheaper
to build, because it does not inline all nodes and sockets in nested
node groups.
Differential Revision: https://developer.blender.org/D10620
This attribute exposes mesh vertex normals as a `vertex_normal`
attribute for use with nodes. Since the normal vector stored in
vertices is only a cache of data computable from the surrounding faces,
the attribute is read-only. A proper error message for attempting to
write this attribute is part of T85749. A write-only normal attribute
will likely come later, most likely called `corner_normal`.
The normals are recomputed before reading if they are marked dirty.
This involves const write-access to the mesh, protected by the mutex
stored in `Mesh_Runtime`. This is essential for correct behavior after
nodes like "Edge Split" or nodes that adjust the position attribute.
Ref T84297, T85880, T86206
Differential Revision: https://developer.blender.org/D10541
Because the search didn't run when the menu first opens, the attributes
appeared in a different order than after you typed anything into the
search field. This commit instead runs the search when the menu
is first opened, but it only sorts items without filtering.
Continuation of work in 2e221de4ce and 249e4df110 .
This prepares things so we can start porting the individual ID types to
the new code design. I already added some code for library IDs, because
they need some special handling during construction, which I didn't want
to break.
The `AbstractTreeElement::isExpandValid()` check can be removed once
types were ported and can be assumed to have a proper `expand()`
implemenation.
Also makes `TreeElementGPencilLayer` `final` which I forgot in
e0442a955b.
Mistake in aa3a4973a3. The expanded `ELEM()` check would include
`0 && te->idcode != 0`, which always evaluates to `false`/`0`. That
wouldn't cause the asset to fail, but the `te->idcode` part would never
be checked.
Fixed the error and cleaned up the check against "0" with a check
against `TSE_SOME_ID`, see b9e54566e3.
Code to check if the Outliner tree-element type was the general ID one
would always check against "0" (explicity or even implicitly). For
somebody unfamiliar with the code this is very confusing. Instead the
value should be given a name, e.g. through an enum.
Adds `TSE_SOME_ID` as the "default" ID tree-element type. Other types
may still represent IDs, as I explained in a comment at the definition.
There may also still be cases where the type is checked against "0". I
noted in the comment that such cases should be cleaned up if found.
Add `BKE_pose_apply_action(object, action, anim_eval_context)` function
and expose in RNA as `Pose.apply_action(action, evaluation_time)`.
This makes it possible to do the following:
- Have a rig in pose mode.
- Select a subset of the bones.
- Have some Action loaded that contains the pose you want to apply.
- Run `C.object.pose.apply_pose_from_action(D.actions['PoseName'])`
- The selected bones are now posed as determined by the Action.
Just like Blender's current pose library, having no bones selected acts
the same as having all bones selected.
Manifest Task: T86159
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D10578
Add an RNA function `activate_asset_by_id(asset_id: ID, deferred: bool)`
to the File Browser space type, which intended to be used to activate an
asset's entry as identified by its `ID *`. Calling it changes the active
asset, but only if the given ID can actually be found.
The activation can be deferred (by passing `deferred=True`) until the
next refresh operation has finished. This is necessary when an asset has
just been added, as it will be loaded by the filebrowser in a background
job.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D10549
Is based on Google style which was used in the Libmv project before,
but is now consistently applied for the sources of the library itself
and to C-API. With some time C-API will likely be removed, and it
makes it easier to make it follow Libmv style, hence the diversion
from Blender's style.
There are quite some exceptions (clang-format off) in the code around
Eigen matrix initialization. It is rather annoying, and there could be
some neat way to make initialization readable without such exception.
Could be some places where loss of readability in matrix initialization
got lost as the change is quite big. If this has happened it is easier
to address readability once actually working on the code.
This change allowed to spot some missing header guards, so that's nice.
Doing it in bundled version, as the upstream library needs to have some
of the recent development ported over from bundle to upstream.
There should be no functional changes.
Continuation of work in 2e221de4ce and 249e4df110. Now the tree-element
types have to be ported one by one. This is probably the most straight forward
type to port.
scenarios
In general, I could not find a reason executing from the python console
should not do an Undo push. Running a script from the Text Editor does
this as well and this seems generally useful.
Without an Undo push, one can easily run into situations were IDs have
been added or removed and undo on would then cause trouble (e.g. first
selection then bpy.ops.object.duplicate() -- this crashed as reported in
T86293 -- duplicate does not get its own undo push because it is not the
last op in the list, wm->op_undo_depth is not zero). This has changed
with the Undo refactor, so in essence the root cause is the same as
T77557, Legacy Undo does not suffer from the crash (but misses
the generally useful undo push from the console still)
Now add Undo to CONSOLE_OT_execute bl_options ('UNDO_GROUPED' seems more
appropriate than plain 'UNDO' since pasting multiple lines of code will
call CONSOLE_OT_execute multiple times in a row).
Maniphest Tasks: T86293
Differential Revision: https://developer.blender.org/D10625
These variables track the wmWindow.event_queue state,
however they were used in a way that wasn't correct.
- check_drag & check_click from wmWindow.eventstate
were used to track the click/drag status of events handled in
wmWindow.event_queue.
- Event's in the queue read from wmEvent.check_drag.
- Once a drag action was detected, wmWindow.eventstate.check_drag
was disabled.
Disabling drag in the event state would not change the drag state
for values already in the event queue.
Simplify logic by moving these values into the window,
so there is one place these variables are tracked.
- Only sort by the preset name (not it's directory).
- Remove redundant string conversion.
- Only call lower() once on the input.
- Don't assign the lambda to a variable for single use.
It is quite common to high framerate video with modern cameras. To make
it easier to edit this footage new framerate presets are added and the
soft limit increased.
Note there is a bug with preset ordering, Blender thinks "120" goes
before "24" this bug needs to be fixed before these changes can be
merged.
Differential Revision: https://developer.blender.org/D10553
Because of D10469 we can now not force child windows onto parent's monitor and allow them to go where they wish.
Differential Revision: https://developer.blender.org/D10593
Reviewed by Ray Molenkamp
Windows 10 supports V100 on all consoles given
you enable the ENABLE_VIRTUAL_TERMINAL_PROCESSING
flag for the console.
This patch enables color logging only on windows
10 and only if the log is not being redirected
to a file.
Differential Revision: https://developer.blender.org/D10546
Now, if the Autokey is not enabled, a new frame is not created and it is used the last active one. If no active frame, a message is displayed and the operation is canceled.
This is a common request for 2D artists.
Also, grease pencil was not working as Blender does in other areas.
Reviewed By: pepeland
Differential Revision: https://developer.blender.org/D10557
This was reported for remesh and skin modifiers.
These dont preserve UV layers (and probably cannot in a reasonable way),
so instead let the UV Project modifier create a new (equally named) UV
layer (as was suggested by @brecht in T59376).
Maniphest Tasks: T59376
Differential Revision: https://developer.blender.org/D10617
The `MAX_LIBARRAY` define was an annoying doublon to the `INDEX_ID_MAX` enum value
now defined in `DNA_ID.h`, and it is no more useful.
And comments were somewhat outdated. Also added an explanation about
chosen order for the `INDEX_ID_<IDTYPE>` order.
Since Blender is single-tabbed, this will prevent extraneous
tab-related options from appearing in "Window" menu in case AppKit's
internals change.
Reviewed By: #platform_macos, sebbas, ankitm
Differential Revision: https://developer.blender.org/D10606
Pasting nodes can create new id relations, because nodes can reference IDs.
Therefore the depsgraph has to be updated when nodes are pasted.
We could somehow check if the pasted nodes referenced IDs, but I'm not sure
if this complexity is worth it.
Replace static methods with regular methods.
Now the 'Main' value is taken from the collection.
Needed to support multiple 'Main' instances in Python, see T86183.
Note that this still does not work when in the node group directly referenced
by the modifier, only in sub-node-groups. This limitation will be removed
at some point.
By default objects are no longer GC tracked, this removes some overhead
although it's not significant in my own testing.
- Only enable GC for StructRNA when 'WITH_PYTHON_SAFETY' is on.
- Only track StructRNA when their 'reference' is set.
- Add missing NULL check when 'WITH_PYTHON_SAFETY' is on
and objects new objects be created.
When building `install`, linking blender_test fails because
test libraries do not exist. This happened on lite + Xcode. Error in
{rBdcb2821292f962951e88f146cb304160f21f73da}.
Reviewed By: #platform_macos, brecht
Differential Revision: https://developer.blender.org/D10607
None of these properties can be animated, so it doesn't make sense
to leave space for decorators on the right side of the panels. In fact
that is what was intended, but they were not manually disabled
in all of the panels.
Because pressing enter will choose the current search item from the menu,
and there was no search item with an empty string, it was impossible to
clear the text of an attribute text field. This commit adds a simple "X"
icon in the top row when you delete the string.
This commit exposes the strings used in the node error messages for
localization. It also changes the message tooltip creation to
automatically add the period at the end, to be more consistent with
the (arguably bad) design of other tooltips in Blender.
Calling `TIP_` directly in the node implementation files allows us to
continue using `std::string` concatenation instead of passing variadic
arguments. It's also more explicit about which part of the message is
translated and which isn't. The files already include the translation
header anyway.
`new` allocates a new object that needs to be autoreleased.
Reviewed By: #platform_macos, sebbas, ankitm
Maniphest Tasks: T86222
Differential Revision: https://developer.blender.org/D10597
The SSS shader in Eevee has the following drawbacks (elaborated in {T79933}):
1. Glowing
2. Ringing. On low SSS jittering it is rendered a bunch of sharp lines
3. Overall blurriness due to the nature of the effect
4. Shadows near occlusions as in T65849
5. Too much SSS near the edge and on highly-tilted surfaces
{F9438636}
{F9427302}
In the original shader code there was a depth correction factor, as far as I can understand for fixing light bleeding from one object to another. But it was scaled incorrectly. I modified its scale to depend on SSS scale*radius and made it independent from the scene scale. The scale parameter (`-4`) is chosen so that it makes tilted surfaces to have visually the same SSS radius as straight surfaces (surfaces with normal pointed directly to the camera).
This depth correction factor alone fixes all the problems except for ringing (pt. 2). Because of float-point precision errors and irradiance interpolation some samples near the border of an object might leak light, causing sparkly or dashed (because of aliasing) patterns around the highlights. Switching from `texture()` to `texelFetch()` fixes this problem and makes textures on renders visually sharper.
An alternative solution would be to detect object borders and somehow prevent samples from crossing it. This can be done by:
1. Adding an `object_id` texture. I think it requires much more code changing and makes the shader more complicated. Again, `object_id` is not interpolatable.
2. Watch gradient of depth and discard samples if the gradient is too big. This solution depends on scene scale and requires more texture lookups. Since SSS is usually a minor effect, it probably doesn't require that level of accuracy.
I haven't notice it in practice, but I assume it can make visible SSS radius slightly off (up to 0.5 px in screen space, which is negligible). It is completely mitigated with render sampling.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D9740
This is ported from Cycles and fixes issues with bump/normal mapping
giving weird reflections/lighting.
Fixes T81070 Specular light should be limited to normal pointing toward the camera
Fixes T78501 Normal mapping making specular artifact
Steps to reproduce:
- switch to Scripting workspace
- execute bpy.data.meshes['Cube'].copy()
- Outliner will not show the new mesh immediately
Now just send appropriate notifier.
Differential Revision: https://developer.blender.org/D10584
The `bNodeLinkDrag` struct was NULL when dragging a node instead of
a link. It is allocated with `calloc` anyway, so this field doesn't
need to be explitely cleared.
This commit includes a few simple improvements to the direct mesh
boolean code added recently.
- Passing the transforms and meshes to `direct_mesh_boolean` as spans
makes the function easier to call from C++.
- The definition of `TransMat`, was unecessary when we have the
`float4x4` type already used elsewhere in C++ code.
Differential Revision: https://developer.blender.org/D10592
The socket drag operator stored the index of the last picked socket
into RNA in case the mouse cursor leaves the link while dragging.
This id was not unique which is why sometimes a link from an other node
with the same id is picked.
This patch changes the way the last picked link is stored and stores a
pointer to the link directly into bNodeLinkDrag struct instead.
Differential Revision: https://developer.blender.org/D10590
The Python API for the curve mapping widget offers the `update`
function, but no way to reset the view to the clipping rectangle.
This commit adds a blenkernel function for this operation,
and exposes it to the CurvMapping RNA API. This allows addons
to display a more user-friendly view of the data in this widget.
Differential Revision: https://developer.blender.org/D10561
This commit adds a search for existing attributes when you click
on an attribute field. This is useful because otherwise you have
to remember which attributes should be available at each node in
the tree.
The fundamental complication is that this information is not
accessible statically. So the search data is only a cache from
the previous node tree evaluation. The information is added
with `BKE_nodetree_attribute_hint_add`, currently for every
input geometry socket for a single node.
This is only an initial implementation, and later versions will
expose the data type and domain of the attributes.
Differential Revision: https://developer.blender.org/D10519
I landed D10527 in rB1a8aee0a7cec accidentally, and the version there was
missing a name change discussed in review. This commit just renames the
boolean variable controlling the special behavior for attribute search.
Original message meant for this change:
For geometry nodes we will use search buttons to display a list of
attributes available the last time the node tree was executed (D10519).
Because this list is just a hint, we need to be able to enter any string,
not just strings from the search items.
This patch adds a boolean option to string buttons to enable this.
The change is quite simple, changes to behavior are only required in
two places. The type-specific button struct changes help a lot here.
Differential Revision: https://developer.blender.org/D10527
In Blender, we used to use the term 'draw' to refer to information
displayed to the user. For version 2.80, it was decided to change these
instances to 'display' instead. This was to avoid the ambiguity between
end-user drawing tools and display options.
From the Oxford English Dictionary:
- Draw: produce (a picture or diagram) by making lines and marks on
paper with a pencil, pen, etc.
- Display: show (data or an image) on a computer, television, or
other screen.
Therefore, we should use draw when referring to drawing tools for
making marks, but use display when referring to information
shown/displayed to the user. From a user POV, the computer displays
certain information, whereas the user draws a mark.
Apparently this change was not implemented consistently, so this patch
changes all remaining relevant instances of "draw".
Differential Revision: https://developer.blender.org/D10551
Currently when you open an RNA collection search button, like a
vertex group selector, the search filter isn't applied until you
start typing, in order to display every option at the start.
Otherwise they wouldn't be visible, since the search filter would
run for the current text.
Currently this check happens in one place, but it relies on the
`changed` value of `uiBut`. This is fine in the interface directory,
but anywhere else it would require exposing `uiBut.changed`, which
is probably too low-level to expose.
The solution is adding an `is_first` argument to the search callbacks,
which is nice for a few reasons:
- They work at a higher level of abstraction, meaning they don't
have to worry about how exactly to tell if this is the first
search.
- It makes it easier to do special behavior when the search menu
is first opened.
- Then, obviously, it makes that state accessible without including
`interface_intern.h`.
Needed for attribute search: T85658
Differential Revision: https://developer.blender.org/D10528
Since the same node tree can be used in modifiers on different objects,
there can be multiple threads writing to the maps in the node tree UI
storage at the same time. The additions for attribute name hints and
error messages made it so this would often cause a crash or at least
an ASAN report. This patch adds locks to prevent multiple threads
from using the maps concurrently.
In a brief test I actually didn't observe a crash without the global
`bNodeTree` UI storage mutex, but I think it's necessary for the change
to be correct, and I did notice some unfreed memory without it anyway.
Ideally it would be in a node tree runtime struct though.
Differential Revision: https://developer.blender.org/D10577
The shadowing was computed on the light distance squared,
leaking to much light since it was integrating the extinction behind
the ligth itself.
Also bump the maximum shadow max step to the actual UI values. Otherwise
we get shadowing under evaluated because `dd` is too small.
Expand is a new operator for Sculpt Mode which is intended to be the main
tool for masking, Face Set editing, interacting with the filters and pattern
creation.
The fundamentals of the tool are similar to the previous sculpt.mask_expand
operator. It shares the same default shortcuts and functionality, making
the previous operator obsolete.
The shortcuts to execute the operator are:
- Shift + A: Expand mask
- Shift + Alt + A: Expand mask by normals
- Shift + W: Expand Face Set
- Shift + Alt + W: Resize current Face Set
The main changes compared to the previous sculpt.mask_expand operator are:
- Modal keymap, all operator options can be changed in real time while the
operator is running.
- Supports creating Mask, Face Sets and Sculpt Vertex Colors.
- Much better code, new features can be easily integrated.
Limitations:
- All Mask operations are supported for Sculpt Vertex colors, but not exposed
by default as their support is still experimental.
- Dyntopo does not support any Face Set or Sculpt Vertex Colors. functionality
(they are not implemented in general for Dyntopo).
- Multires does not support any feature related to geodesic distances.
- Multires does not support vertex colors.
- Multires does not support recursions.
- In Multires, Face Sets snaping does not initialize all current enabled Face
Sets when toggling snapping.
- In Multires, Face Sets are created at base mesh level (works by this by
design, like any other tool).
- Unlike the previous mask_expand operator, this one does not blur the mask
by default after finishing Expand as that does not fit the new design.
The mask can still be blurred by using the mask filter manually.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10455
The performance debug menu isn't used that often anymore as render doc
also show the timings. This patch will make sure that enabling the
performance debug view (21) does not crash blender.
The crash happened when the density in the Point Distribute node was
above zero but so small, that no point was generated. In this case, there
was a point cloud component, but the point cloud was empty, making some
attributes unavailable.
One could also make more attributes available in this case, but that can
be done separately if necessary.
Move low level logic to module code and versioning logic to versioning code.
Metas strip position was handled in diffrent way compared to other strips.
This was introduced in c8b0d25794 as bugfix for T28158.
I disagree with such design. Meta strips should be handled in same way as
any other strips.
I have tested this change and haven't found any problems.
No problems after checking T28158 as well.
There should be no functional changes on user level.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D9972
Nicely hidden bug in pose read library code, it was using the library
from the wrong ID as reference to relink the custom shape object pointer
(pose is data from Object, not Armature).
This is same issue as fixed by d857892553, but I forgot to check meta
strips. Meta strip output is always in render size.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10560
Applying negative offset to seek position before scanning doesnn't have
any effect. This change results in 1.5x faster seeking (random frame,
average value) in sample file with 30 frame GOP length.
If I am not mistaken, B frames can have pts that can be less than
pts of I frame that must be decoded. Even in this case though, B frame
packet will be stored after that I frame.
In addition, preseek value is de facto hardcoded so seeking would fail
if it could. This can be hard to spot though.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10529
Isolate RNA and operator logic from functions that create strips.
- Operator specific code was removed from `SeqLoadInfo` structure and
`SEQ_add_*` functions.
- Strip loading code was removed from RNA and operator functions.
- `SEQ_add_*` API was unified to work on `SeqLoadData` struct.
Only exception is image strip, which require files to be loaded
separately to strip creation itself. This is not ideal, but I think
it's acceptable.
- Some functions and variables were refactored so the code reads
better.
There are minor functional changes (coincidental bugfixes):
- Operator errors are reported per-strip. Previously they were not
reported at all?
- `new_sound()` RNA API function now create sound with length of 1
if source file does not exist. Previously it created strip with
length of 0.
- Replace selection operator property wasn't working correctly.
Fixed in this patch.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9760
This enables the quick access button [to show the relevant Texture in
the Properties Editor] for textures used in geometry nodes.
This goes in line to what we do for other textures:
- modifier textures have this button
- particle textures have this button
- brush textures will soon have it, too (see D9813)
When outside of the Properties Editor, the button will always show (if a
texture is actually assigned), but will be inactive if no suiting
Properties Editor to show the texture in can be found.
Note this also changes the behavior to not show the button if _no_
texture is assigned (as in: we are still showing the "New" button).
Previously it was always there (e.g. for modifier textures), even if it
would take us to an empty texture tab. (Sure, we could add a texture
there then, but imho it makes more sense to just start showing it once a
texture is already there)
For this to work with geometry nodes, the following chages were done:
- implement foreachTexLink for geonode modifiers
- new buttons_texture_user_node_property_add() that stores prop as well
as node
- also use NODE_ACTIVE_TEXTURE flag in geometry nodetrees
notes:
- this still uses the first suiting (as in: pinning does not interfere)
Properties Editor it finds, this should (maybe?) find the _closest_
Property Editor instead (see related feedback in D9813).
- this will already show the button for brush textures as well
(disabled), but there is another mandatory change in an upcomming commit
to make it work there as well (see D9813)
ref. T85278
Maniphest Tasks: T85278
Differential Revision: https://developer.blender.org/D10293
Currently the compositor reads cryptomatte meta-data from the render
result. When loading a multilayer open exr file the meta-data was ignored.
This patch will also load the cryptomatte meta-data from multilayer open
exr files.
This enabled workflows where the rendering and compositing are done in
separate scenes or for future changes where the cryptomatte node will
use the meta-data for name matching and color picking.
Reviewed By: Sergey Sharybin
Differential Revision: https://developer.blender.org/D10384
Utility to construct a cryptomatte session from a render result or
openexr file. This will allow D3959 to be more aware of the context
it is working on and would also support external render engines in
the cryptomatte color picker.
1638af109e &
bfc70a6a95
caused a regression with click-drag (not tweak which has it's own logic).
Restore some changes from these commits with added comments.
Minor changes from previous functionality from
39919e3532.
- `prevval` & `prevtype` are now set for all kinds of new events
in the queue previously this was not done for some kinds of events
(mouse wheel, ndof - for example).
- Set `prevval` & `prevtype` for other windows for mouse buttons.
This check was added before is_repeat was supported, use this variable
instead since it's more a more reliable way of detecting held keys.
Also remove outdated comment.
Rename:
- `BKE_animsys_store_rna_setting` → `BKE_animsys_rna_path_resolve`
- `BKE_animsys_read_rna_setting` → `BKE_animsys_read_from_rna_path`
- `BKE_animsys_write_rna_setting` → `BKE_animsys_write_to_rna_path`
The concept of "RNA setting" is unclear; the new names reflect better
what the functions actually do.
No functional changes.
Remove `animsys_evaluate_action()` and rename
`animsys_evaluate_action_ex()` to it. The only function of the former
was to call the latter, with the exact same parameters.
No functional changes.
Before this change messages of ERROR and above were printed.
This change makes it so LOG(INFO), LOG(WARNING), LOG(ERROR)
and LOG(FATAL) will be printed to the console by default
(without --debug-libmv and --debug-cycles).
On a user level nothing is changed because neither INFO nor
WARNING severity are used in our codebase. For developers this
change allows to use LOG(INFO) to print relevant for debugging
information. Bering able to see WARNING messages is also nice,
since those are not related to debugging, but are about some
detected "bad" state.
After this change the LOG(INFO) is really treated as a printf.
Why not to use printf to begin with? Because it is often more
annoying to print non-scalar types. Why not to use cout? Just
a convenience, so that all type of logging is handled in the
same way. When one is familiar with Glog used in the area, it
is easy to use same utilities during development. Also, it is
easy to change LOG(INFO) to VLOG(2) when development is done
and one wants to keep the log print but make it only appear
when using special verbosity flags.
The initial reason why default severity was set to maximum
possible value is because of misuse of VLOG with verbosity
level 0, which is the same as LOG(INFO). This is also why
back in the days --debug-libmv was introduced.
Now there is some redundancy between --debug-libmv, --debug-cyles
and --verbose, but changes in their meaning will cause user
level side effects.
Differential Revision: https://developer.blender.org/D10513
Usage of LOG(INFO) actually went against own guidelines in the
logging.h: the INFO is for messages which are to be printed
regardless of debug/verbosity settings.
Cryptomatte layers in Blender are predefined. Other render engines
might have other naming schemes. This patch will allow creation of
cryptomatte layers with other names. This will be used by D3959 to
load cryptomatte openexr files from other render engines.
EEVEE and Cycles still use our fix naming scheme so no changes are
detectable by users.
I made an incorrect comment in patch review that "Location"
should be used instead of position. "Position" is more appropriate
here since it refers to generic data rather than an object origin.
"Position" is also the name we chose for the attribute for this reason.
Move some drawing code from `area.c` and `ed_util.c` into `ed_draw.c`.
This is to support the new generic slider that wil be used in T81785.
No functional changes.
Reviewed By: #animation_rigging, #user_interface, Severin, sybren
Maniphest Tasks: T81785
Differential Revision: https://developer.blender.org/D9313
Add a CLI argument `--open-last` that opens the most recent file,
effectively doing the same as {key Ctrl Shift O}, {key Enter} after
starting Blender.
When there are no known recent files, print a warning and do nothing,
showing the startup file instead.
Note that this does not try to be smart about restoring the last Blender
session. It just opens the file from disk, as if the user had typed
`blender $(head -n1 ~/.config/blender/2.93/config/recent-files.txt)`.
There is also no smartness when that file cannot be opened; it behaves
exactly the same as typing the most recent filename on the CLI.
Reviewed by: mont29, campbellbarton
Differential Revision: https://developer.blender.org/D10563
The goal of the change is to perform check for attempts of icons
being overwritten on canvas. The check is based on checking original
coordinate of icons against all read icons. If there are two icon
files which have same original an error will be reported. The report
includes both file names to make it easier to troubleshoot.
This change will allow to early-on catch issues which we currently
have with the release environment: official Linux builds might have
different icon from Blender compiled locally. This is because the
order in which directory listing is traversed is not defined, so
it's like a race condition between two files to win the place in
the final canvas.
There is still possible improvement in the code to move more fields
into the context structure. This is beyond of goal of this change.
Note that before committing this change icons must be brought back
to their consistent state. Otherwise the build will fail.
Differential Revision: https://developer.blender.org/D9715
Simply disable advanced 're-use current blend data` process when loading
a memfile step and Global Undo is disabled, since there is no way to
ensure we have a proper 'differential' state in the stack then.
NOTE: this is a quick work-around to fix the crash, not a satisfying
solution by far (pretty sure there can still be crashes if you then
re-enable Global Undo afterwards e.g.).
Reflection
Anisotropic is not really supported in Eevee, but since code looks like
it is just intended to make it behave like glossy, it should function
like it too.
Seems like the internal calling from `node_bsdf_glossy` from
`node_bsdf_anisotropic` has swapped arguments.
Also: ssr_id is available for SH_NODE_BSDF_ANISOTROPIC as well (see
`ntree_tag_bsdf_cb`), so why not use it?
Maniphest Tasks: T84658
Differential Revision: https://developer.blender.org/D10547
Click detection logic relied on the event queue not accumulating events
as newly added events at the end of the queue adjusted
`wm->eventstate->prev{val/type}` which was then compared with events
at the front of the queue.
This made Ctrl-Click fail to detect the click as releasing Ctrl
set the previous value before the previous event was handled.
In practice this only happened in heavy scenes,
updating 10 fps or lower. It also made automated tests fail that
accumulate events before handling them.
This makes event's prevval and prevtype usable for events in the queue.
Previously they were unused, except as a hack for modal keymap handling.
This is needed to fix T86116, where the `wm->eventstate->prev{val/type}`
are set to values from events that have not been processed.
Currently the intended behavior regarding prevval/prevtype isn't
handled consistently. However, including cursor motion causes events
in `wm->queue` and `wm->eventstate` to behave differently,
where `wm->eventstate` ignores motion (necessary for click detection).
This makes checks from `wm->eventstate` to events in the queue fail.
This reverts 39919e3532,
using the `event.type` instead of it's previous type.
This works as it includes mouse button release events.
When polygons around a bevel are rebuilt, sometimes UVs are merged
around a new vertex in the case of the face opposite a single edge
being beveled on a 3-edge vertex. This should not have been done
if any of the edges at that vertex were a seam.
Triangulating ngons could fail with the method that was being
used: projecting along the dominant normal axis and then using CDT.
It could fail if the ngon has self crossings or might be so after
the described projection.
Switched to using projection along the normal itself, and also to
using polyfill which produces some kind of triangulation no matter
what in such circumstances. This will also likely be faster if
there are a lot of ngons in the meshes, since the exact arithmetic
CDT was being used before, and now float arithmetic is used.
Looks like they removed static libs by default in OCIO 2.0, for some
historical reasons `install_deps` was enforcing using only static libs
for this one, now removed it so that Blender buil can use usual so's.
When a GP object was parented to e.g. a bone, box selection as well as
point selection were broken in that the selection from the user would
not correlate with what was actually being selected.
The issue was that box and point selection did not use the active
evaluated stroke data. The fix uses the correct data.
Reviewed By: antoniov
Maniphest Tasks: T85987
Differential Revision: https://developer.blender.org/D10555
This patch adds an output field to the Attribute Proximity node and
renames the existing string socket from "Result" to "Distance".
- The "Distance" output contains distance to the closest position
on the Target geometry.
- The new "Location" output contains the coordinates of the closest
position on the Target geometry.
A basic use case for this data is a simple shrinkwrap operation.
Differential Revision: https://developer.blender.org/D10415
The location of the shaders changed with OSL 1.11.10. This commit is therefore in addition to D10212.
@sybren With the latest SVN libraries, I am fairly certain there is a "OSL not found" in the CMake output. Can you check on Linux?
@LazyDodo Since you haven't pushed the new OSL libs yet, this should not be a problem on Windows. So this will only be needed whenever those land.
Reviewed By: LazyDodo
Differential Revision: https://developer.blender.org/D10552
Tools can cache data related to the mesh topology for later use. This
data is indexed by vertex index, so it will be invalid after dyntopo
changes the topology during the stroke.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10550
This patch adds manifest parsing to Cryptomatte. Normally when loading
cryptomatte layer from an OpenEXR file the manifest contains data to
convert a hash to its original name of the object/material. In the
future we want to use this to support lookup of cryptomatte
hashes and show it to the user.
Currently this logic isn't available to users (for now), but is required
by D3959 where a new cryptomatte workflow is implemented.
Fill only if it never comes in contact with an edge. It is better not to fill than to fill the entire area, as this is confusing for the artist.
Differential Revision: https://developer.blender.org/D10536
Render previews for Action datablocks by rendering the scene camera with
the Workbench (solid) engine. The //look// can be configured by setting
the scene's render engine to Workbench and editing the scene's shading
properties.
It is assumed that the pose has already been applied and that the scene
camera is capturing the pose. In other words, the render function just
renders from the scene camera without evaluating/applying the Action
stored in `preview->id`. The ID is only used to determine its type and
to store the resulting preview.
Not all code paths that lead to the `action_preview_render()` function
actually provide a depsgraph. The "Refresh Asset Preview" button
(`ED_OT_lib_id_generate_preview`) does, but `WM_OT_previews_ensure` does
not.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D10543
When a lot of libraries or linked IDs were missing/not found when
loading a .blend file, Blender used to show one warning report for each
missing item, potentially covering the user's screen with a giant
unuable popup.
Now it will instead generate a single warning with amount of missing lib
files and linked IDs. Each missing item is still reported individually,
but only as `INFO`, so it will still show up in the console or Info editor.
Undo/redo was crashing & asserting.
There ware two bugs:
- Entering particle system edit-mode requires an evaluated depsgraph.
- The active object could get out of sync when undo/redo
moves between different modes.
The new test 'view3d_mesh_particle_edit_mode_simple'
in `tests/ui_simulate/test_undo.py` exposes both issues.
"Shift to parent" does not make any sense for collections since they
don't have parenting like objects. This commit just adds a simple check
for whether the first drag ID is an object before displaying
that part of the message.
Differential Revision: https://developer.blender.org/D10203
When opening the SVG you wouldn't even see the icons, since they are all white
now. You'd always have to set up a document background color and make sure to
undo that again before saving the file, so it's not written into it.
Just make everyone's life easier by saving the file with a proper background
(gray with checkerboard).
Inkscape often does a number of unrelated changes when saving an SVG, not sure
if these are just formatting changes in the source SVG text or if there's more
to it. Either way this makes adding new icons hard since you want to avoid
these unrelated changes. Saving the file in a new Inkscape version every once
in a while should mitigate the problem a bit.
Regenerating the icons (e.g. through `make icons`) shows no difference in the
output.
Note that I also ran "Clean Up Document" in Inkscape, but that doesn't seem to
have changed anything/much.
The Purge operator to remove unused IDs can now also remove 'indirectly
unused' data-blocks (those only used by unused ones, recursively).
It can also now only operate on linked, or on local data.
All those options are exposed in the `File -> Cleanup` main menu.
The behavior of the `Purge` button in the Outliner remains unchanged,
needs some UI/UX design task for that.
This API function can now purge recursively in a single call, and choose
to ignore (not purge) local or linked IDs.
Default behavior (with not argument) remains unchanged, so no API
breackage here.
This was rather obscure and non-critical issue, but in some cases ID
usercount of some deleted IDs from batch-deletion code would not be
properly nullified, which would then assert later in actual deletion
code.
With the option to detect orphaned data recursively (i.e. if ID `a` is the
only user of ID `b`, and ID `a` is unused, ID `b` will also get tagged
as unused).
To be used by the Purge operation.
Previously the padding size and the width saved for the icon were
constant regardless of the zoom level. This resulted in overlapping
icons and text, and ugly padding with more extreme zoom levels.
We can retrieve the size of the row from the `rect` argument.
An error doesn't make sense in these situations because we don't expect
to find attributes on empty geometry, and an empty geometry set is a
valid situation.
Note that we can't use `component.is_empty` here, because often the
component is visually "empty" but still has a point cloud with no
points or a mesh with no vertices.
This concerns currently only collections (`master_collection` of scenes)
and root node trees. It removes the matching type-specific helpers
(`BKE_collection_master_scene_search` and `BKE_node_tree_find_owner_ID`).
No functional change expected here.
NOTE: Current implementation of `owner_get` is far from optimal, we
could probably do it better, see {T69169}.
NOTE: While it could also have it, shapekeys IDTypeInfo was left out of
this change for now. Mainly because it sould not be used currently, and
we ultimately want to demote shape keys from ID status anyway.
In rare cases, it's possible for an object to have edit-mode data
without it's Object.mode set to edit-mode.
This could happen with undo, part of fix for: T85974.
Use OBEDIT_FROM_VIEW_LAYER macro for curve & fonts (matching edit-mesh).
While the difference isn't significant at the moment,
there are no reason these should be different between undo systems.
This issue seems to be caused by the reallocation flag not being set on
the device shader data array so it was never updated on the GPU although
the host memory was modified.
These defines seem to be left over from the initial implementation
of the node editor. In a few places the values were used in button
creation, but the callbacks never checked the value anyway.
Node uiBlocks also had a callback what would never do anything
since the value it checked for was never used.
Following the naming conventions defined in T56648, where in this
instance there were still a few remaining uses of the old term.
Differential Revision: https://developer.blender.org/D9817
Clear the weird term "Metaelement".
These are the metaballs (elements) inside one metaball objects.
- "Meta Ball" to "Metaball"
- "Metaelement", "Meta element" to "Metaball element"
Differential Revision: https://developer.blender.org/D9910
Changes include using proper and consistent grammar, simplifying
phrasing, using correct terminology, and not including python API
identifiers in tooltips.
Differential Revision: https://developer.blender.org/D9924
The colons are not necessary in these situations because it's clear
that the label applies to the next group of buttons anyway, and they
add unecessary visual complexity. Committing as part of D9924.
In vertex selection mode, the "At First" and "At Last" options are
contextually added to the beginning of the list of merge operations.
This means the automatic shortcuts in the merge menu are different,
making learning the shortcuts much more difficult than necessary.
This patch reorders the items so that "At First" and "At Last" are
added after the first three options so the shortcuts are always
consistent.
Fixes T84335
Differential Revision: https://developer.blender.org/D10008
This commit tweaks how virtual sockets (unconnected node group input
and output sockets) are drawn to make them more recognizable. The
outline is changed to a gray color, and they get a dark inner color.
Differential Revision: https://developer.blender.org/D10080
When using particle mode, the particle tool settings were always
displayed, even if select/cursor is the active tool. This patch
hides the properties of the particle tools for non-brush tools,
using the same check as in other modes.
Differential Revision: https://developer.blender.org/D10266
Multiply the two number together. If the sign of the result is positive, then the sign was the same. If the sign of the result is negative, then the signs were different.
When closing the blender, while the callbacks are removed, the
reference count of the object used as `customdata` is not decremented.
This commit adds two functions that correctly release the
python `draw_callbacks` before releasing all `draw_callbacks`.
Differential Revision: https://developer.blender.org/D10478
Improved the calculation of the distances and changed the variable names to make it more readable.
Still, there are some corner cases that could be not handled properly, but we keep as is to test more real drawings to analyze if the small number of corner cases needs to be fixed or not.
This bumps OSL to 1.11.10.0. OSL Has a new build time
dependency: Clang, and more importantly it expects
clang and llvm to share a library folder, which it
previously for us did not.
This patch changes:
-OSL Update to 1.11.10.0
-refactor the llvm/clang/clang-tools-extra builds into the llvm
build using the llvm-project tarball for building that has all
of the subprojects in it.
-update ispc/openmp builds since clang no longer its own dependency
and they have to depend on the llvm build now.
-Update the windows builder to use the 64 bit host tools since it
ran out of ram linking clang
-Since OSL now needs clang to link successfully a findclang.cmake
has been provided for linux/OSX
Differential Revision: https://developer.blender.org/D10212
Reviewed By: brecht, sebbas, sybren
`object_in_any_collection` used during linking/appending to check
whether an object is already instanced by at least one collection, was
not taking into account embedded master collections from scenes.
With the previous implementation, we could have pixels with offset larger
than 1 pixel.
Also fix a bug when the closest_index is not last. The sample positions
were incorrect in this case.
This was caused by the window_translate_m4 not offsetting the winmat in the
right direction for perspective view. Thus leading to incorrect weights.
The workbench sample weight computation was also inverted.
This fix will change the sampling pattern for EEVEE too (it will just
mirror it in perspective view).
Using `make icons` for 420f538fad changed some icons that it shouldn't have
touched on my system. Not sure what caused this, maybe a bug in the slightly
outdated Inkscape version there (1.0.1). Here on macOS the version is only
reported as 1.0 so I'm not sure what the situation is. Either way, this fixes
the icons.
D9054 did multiple consecutive `immBegin()`/`immEnd()` draw calls to draw
multiple lines at varying thickness. This would only work for the first line,
then they'd all get a 1px thickness (at least on macOS).
Issue was that `wide_line_workaround_end()` called `immBindShader()` directly
to restore the old shader (which the workaround overrides). However this
doesn't set `imm->builtin_shader_bound` which has to be done for the workaround
to work on the next `immBegin()` call. Instead `immBindBuiltinProgram()` can be
called.
Differential Revision: https://developer.blender.org/D10520
Reviewed by: Clément Foucault
m_tabletInRange is no longer set for Wintab after 2e81f2c01a
reverted Wintab changes. This reverts most button processing to
behavior present in 2.91.2.
Left in place is a bugfix for Windows Ink: button events while a
Windows Ink pen is in range should still be processed. Events processed
by Windows Ink and not passed to DefWindowProc do not create WM_*BUTTON
events, but button events from e.g. tablet pad express keys do create
WM_*BUTTON events and should be handled.
Windows mouse history function GetMouesMovePointsEx has well documented
bugs where it receives and returns 32 bit screen coordinates, but
internally truncates to unsigned 16 bits. For mouse (relative position)
input this is not a problem as motion events and the resulting screen
coordinates reliably fit within 16 bit precision.
For tablets (absolute position) the 16 bit truncation results in
corrupt history when tablet drivers use mouse_event or SendInput from
the Windows API to move the mouse cursor. Both of these functions take
absolute mouse position as singed 32 bit value on the range of 0-65535
(or 0x0-0xFFFF) inclusive. Values larger than 0x7FFF (the largest
signed 16 bit value) are reliably corrupt when retrieved from
GetMouesMovePointsEx history. This is true regardless of whether mouse
history is retrieved using display resolution (GMMP_USE_DISPLAY_POINTS)
or high resolution points (GMMP_USE_HIGH_RESOLUTION_POINTS), the latter
of which should return points in range 0-65535.
Reviewed By: brecht
Maniphest Tasks: T85874
Differential Revision: https://developer.blender.org/D10507
m_tabletInRange is no longer set for Wintab after 2e81f2c01a
reverted Wintab changes. This reverts most button processing to
behavior present in 2.91.2.
Left in place is a bugfix for Windows Ink: button events while a
Windows Ink pen is in range should still be processed. Events processed
by Windows Ink and not passed to DefWindowProc do not create WM_*BUTTON
events, but button events from e.g. tablet pad express keys do create
WM_*BUTTON events and should be handled.
Windows mouse history function GetMouesMovePointsEx has well documented
bugs where it receives and returns 32 bit screen coordinates, but
internally truncates to unsigned 16 bits. For mouse (relative position)
input this is not a problem as motion events and the resulting screen
coordinates reliably fit within 16 bit precision.
For tablets (absolute position) the 16 bit truncation results in
corrupt history when tablet drivers use mouse_event or SendInput from
the Windows API to move the mouse cursor. Both of these functions take
absolute mouse position as singed 32 bit value on the range of 0-65535
(or 0x0-0xFFFF) inclusive. Values larger than 0x7FFF (the largest
signed 16 bit value) are reliably corrupt when retrieved from
GetMouesMovePointsEx history. This is true regardless of whether mouse
history is retrieved using display resolution (GMMP_USE_DISPLAY_POINTS)
or high resolution points (GMMP_USE_HIGH_RESOLUTION_POINTS), the latter
of which should return points in range 0-65535.
Reviewed By: brecht
Maniphest Tasks: T85874
Differential Revision: https://developer.blender.org/D10507
There was a similar report prior to the introduction of the Image
Engine, see T74586.
This was fixed by rB6a5bd812b569 at that time, but got lost in the
refactor it seems.
Above commit introduced the `ED_space_image_get_display_channel_mask`
function that will determine
the valid bitflags for the display channel of a given ImBuf.
But since the refactor, this is not called anymore (`draw_image_main` is
not called anymore)
Now it seems we can safely reuse that said function
`ED_space_image_get_display_channel_mask` also for the Image Engine.
Maniphest Tasks: T85895
Differential Revision: https://developer.blender.org/D10510
This allows accessing attribute meta data like domain and data type
without having to create a `ReadAttribute`. I kept the `attribute_names`
method for now to keep the patch more self contained.
Differential Revision: https://developer.blender.org/D10511
Sync the list of icons in CMakeLists.txt with UI_icons.h.
Restore, in the source file, the FUND icon that was accidentally
deleted.
Delete four old/unused icons.
See also D9715.
Using `FunctionRef` is better than using `std::function`, templates and c function
pointers in some cases. The trade offs are explained in more detail in code documentation.
The following are some of the main benefits of using `FunctionRef`:
* It is convenient to use with all kinds of callables.
* It is cheaper to construct, copy and (possibly) call compared to `std::function`.
* Functions taking a `FunctionRef` as parameter don't need to be declared
in header files (as is necessary when using templates usually).
Differential Revision: https://developer.blender.org/D10476
There are cases where the default input passes of color+albedo do not yield useful results
and while this was possible to change that for final frame rendering (in the layer settings),
viewport denoising always used a fixed color+albedo. This adds an option to change the
input passes for viewport denoising too, so that one can use it in scenes that otherwise
wouldn't work well with it.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D10404
rBc70eb30240f8b5d5a8f2ac509f0eb585936142b5 added patch to use static
zlib on Linux. But also added flags to use the zlib in LIBDIR for
Python on macOS. That causes some shared libraries (binascii for one)
to link against libz.1.dylib which will not be there on users' systems.
Reuse the said patch for macOS also to avoid rpath issues.
Fix T85648.
Reviewed By: #platform_macos, brecht
Differential Revision: https://developer.blender.org/D10479
Constraint of new window position can be incorrect when using multiple monitors.
Differential Revision: https://developer.blender.org/D10469
Reviewed by Brecht Van Lommel
Remove the setting of Dialog window styles until we confirm expected behavior between platforms.
Differential Revision: https://developer.blender.org/D10470
Own Code
Removal of 'camera frame' around blend file thumbnail images.
Differential Revision: https://developer.blender.org/D10490
Reviewed by Brecht Van Lommel
Refactoring: WM_window_open() that can open different types of windows. 'New Window' with simplified layout.
Differential Revision: https://developer.blender.org/D10419
Reviewed by Brecht Van Lommel
Geometry nodes were not adding referenced instanced collections as
dependencies to depsgraph.
This would lead to meshes and data not being ready on evaluation in
certain cases.
This updates platform/platform_win32.cmake to support
both the old and new library names for OpenXR.
The new version links against one additional system
library and the debug library filename changed ever
so slightly.
This is a temporary workaround and can be removed
once the new lib versions have landed.
Rather than hardcoding the lib names, read
boosts version.hpp and extract the version
from there.
This will make it easier to land lib changes
in the near future.
Specular color is set to black instead of white inside the Principled BSDF
when the base color is set to fully black. This is contradictory to the sample
code of the Disney BRDF in BRDF Explorer. This patch aligns both
implementations.
Differential Revision: https://developer.blender.org/D10448
rB1f5647c07d15 introduced for the first time a unicode escape in strings
to be translated, directly extracted from C-code itself.
This revealed that this case was not properly handled by current code,
for now we work around using `raw_unicode_escape` encoding/decoding of
python.
Improvements to how window states are determined and changed.
Differential Revision: https://developer.blender.org/D10470
Reviewed by Brecht Van Lommel
Taa offset was applied on first sample. This wasn't happening before
DOF refactor.
Also fixes T85618 Wireframe Displays Strangely in Eevee (Rendered,
material Preview)
Contact shadows needed correct `gl_FragCoord.z` but this is not
correctly set for fullscreen passes. Need to pass depth using a global
variable until we get rid of `cl_eval.tracing_depth`.
This was introduced in the new geodesic distances algorithm for proportional
editing. When all faces of an edge are hidden, that edge should be considered
as loose geometry.
Initial patch by Pablo with modifications by Brecht.
Differential Revision: https://developer.blender.org/D10488
Currently the GPU module for python has different ways to handle enums.
- Organizing items in `PyC_StringEnumItems` arrays and parsing them with `PyC_ParseStringEnum`.
- Using dedicated functions for each type of enum (`bpygpu_ParsePrimType`, `pygpu_ParseVertCompType` and `pygpu_ParseVertFetchMode`).
Although apparently more efficient (especially `pygpu_ParseVertCompType`
which transforms strings into integers for simple comparison), these
dedicated functions duplicate functionality, increase the complexity of
the code and consequently make it less readable.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D10456
With very large distances there were precision / overflow errors, normalize
the average albedo to avoid that. This was causing test failures on macOS
Arm, but also other architectures had slightly wrong results.
Ref T78710
The Exact modifier code had been written to avoid using BMesh but
in the initial release the modifier still converted all Meshes to
BMeshes, and then after running the boolean code on the BMeshes,
converted the result back to a Mesh.
This change skips that. Most of the work here is in getting the
Custom Data layers right. The approach taken is to merge default
layers from all operand meshes into the final result, and then
use the original verts, edges, polys, and loops to copy or interpolate
the appropriate custom data layers from all operands into the result.
When opening a Blender version for which there are no preferences, the splash
shows a button like "Load 2.92 Settings". Using this could cause a memory leak
of the storage for recently opened files.
The "quick setup" dialog is actually a 'menu', and the "splash screen" block
contains the UI_BLOCK_LOOP flag which causes the buttons' text to align
to the left, however, usually regular buttons have centered text.
As a workaround, add the UI_BLOCK_QUICK_SETUP flag which prevents
the text from being left-aligned.
Differential Revision: https://developer.blender.org/D10486
Reviewed by: Julian Eisel
Support Python 3.10a5 or 3.9x with support explicitly enabled.
- Enable Python's postponed annotations for Blender's RNA classes
types registered on startup.
- Using postponed annotations has implications for how they are defined,
since they must evaluate in the modules name-space instead of the
classes name-space. See changes to annotations in `release/scripts`.
- Use `from __future__ import annotations` at the top of the module
to ensure the script will run with Python 3.10.
- Old logic is kept since it could be used if PEP-649 is supported.
Resolves T83626
Ref D10474
This adds an approximation of inverted AO by reversing the max horizon
search (becoming a min horizon). The horizons are correctly clamped in
the reverse direction to the shading and geometric normals.
The arc integration is untouched as it seems to be symetrical.
The limitation of this technique is that since it is still screen-space
AO you don't get other hidden surfaces occlusion. This is more
problematic in the case of inverted AO than for normal AO but it's
better than no support AO.
Support of distance parameter was easy thanks to recent AO refactor.
Fix regression with roughness not masking reflections when not using
Screen Space raytracing.
The trick was to only evaluate one planar per pixel, the one with
the most influence. This should not be too limiting since this is what
we do for SSR.
Also change evaluation order do not apply occlusion on planars probes.
- Fix noise/banding artifact on distant geometry.
- Fix overshadowing on un-occluded surfaces at grazing angle producing "fresnel"
like shadowing. Some of it still appears but this is caused to the low number
of horizons per pixel.
- Improve performance by using a fixed number of samples and fixing the
sampling area size. A better sampling pattern is planned to recover
the lost precision on large AO radius.
- Improved normal reconstruction for the AO pass.
- Improve Bent Normal reconstruction resulting in less faceted look on
smoothed geometry.
- Add Thickness heuristic to avoid overshadowing of thin objects.
Factor is currently hardcoded.
- Add bent normal support to Glossy reflections.
- Change Glossy occlusion to give less light leaks from lightprobes.
It can overshadow on smooth surface but this should be mitigated by
using SSR.
- Use Bent Normal for rough Glossy surfaces.
- Occlusion is now correctly evaluated for each BSDF. However this does make
everything slower. This is mitigated by the fact the search is a lot faster
than before.
Previously, methods like `Span.drop_front` would crash when more
elements would be dropped than are available. While this is most
efficient, it is not very practical in some use cases. Also other languages
silently clamp the index, so one can easily write wrong code accidentally.
Now, `Span.drop_front` and similar methods will only crash when n
is negative. Too large values will be clamped down to their maximum
possible value. While this is slightly less efficient, I did not have a case
where this actually mattered yet. If it does matter in the future, we can
add a separate `*_unchecked` method.
This should not change the behavior of existing code.
Expanded enum items like this usually have centered text, but there are
limitations in the popup code that break this here. Add a workaround for this
limitation.
Differential Revision: https://developer.blender.org/D9854
Reviewed by: Julian Eisel
This patch adds a to_curve method to the Object ID. This method is
analogous to the to_mesh method. The method can operate on curve and
text objects. For text objects, the text is converted into a 3D Curve ID
and that curve is returned. For curve objects, if apply_modifiers is
true, the spline deform modifiers will be applied and a Curve ID with
the result will be returned, otherwise a copy of the curve will be
returned.
The goal of this addition is to allow the developer to access the splines
of text objects and to get the result of modifier applications which was
otherwise not possible.
Reviewed By: Brecht
Differential Revision: https://developer.blender.org/D10354
Previously the same functions were used to both set and get the active
state for outliner tree elements. This has quite a few problems.
- It's hard to tell when data is changed or simply read
- It prevents using `const`
- The code is full of if statements, making it longer and less readable.
This commit replaces the `tree_element_type_active` and
`tree_element_active` functions with `_get` and `_set` variants. One
has const arguments and returns the active state, the other deals only
with setting the state. While this refactor results in slightly more
lines of code, the result is much better in my opinion.
This commit also removes unused variables from arguments of the affected
functions.
Differential Revision: https://developer.blender.org/D10232
This commit adds a simple string input node, intended for use in the
attribute workflow to make using the same attribute name in multiple
places easier. The node is function node similar to the existing vector
input node.
Ref T84971
Differential Revision: https://developer.blender.org/D10316
This makes the nodes look more consistent with the rest of the UI
by using the same split with right aligned labels as the property editor
and elsewhere. Additionally, for consistency, the "Type" part of some
dropdowns is removed. It already wasn't displayed everywhere, and
it gets redundant quite quickly.
The "Hide Collection" operators assigned to the number keys in edit mode
trigger a redraw of the outliner, but as an optimization, they do *not*
trigger a rebuild of the tree.
This optimization is valid because unlike the collection exclude toggle,
the heirarchy is not affected by collection visibility. However, it means
that currently you must trigger a rebuild to get the correct "grayed out"
status after using the operator.
Rather than trigger a rebuild in this case to solve the bug, this patch
moves the decision for whether to gray out the text of a tree element
to the draw step rather than the build step. This means that any change
to the corresponding properties doesn't require a full tree rebuild.
Note that changing the "hide_viewport" property from the outliner still
causes a tree rebuild. I think that's because of the checks in
`outliner_collection_set_flag_recursive_fn`.
That could be optimized in the future.
Differential Revision: https://developer.blender.org/D10240
Add the Simple subdivision option to Geometry nodes, as a new node
instead of part of the existing subdivision node because of future
backend changes to the Simple option. (See T85584)
https://developer.blender.org/D10409
This reverts commit 7ee518cf70.
Causes T84869. The initial issue is less bad than this. We are looking into
alternative fixes for 2.93 (see D9854 and D9853).
This adds fuzzy search functionality to various input fields in Blender
where one can choose a value from many existing values (e.g. the
Vertex Group property in the Displace modifier).
Differential Revision: https://developer.blender.org/D10446
Following with the changes included to interpolate strokes of different number of points, a full review has been done in the interpolation tools.
* Interpolate now is a tool and not an operator. It was not logic to have this tool as a button.
* Interpolate tool parameters have been moved to topbar.
* Interpolate popover has been removed from topbar and interpolate `Sequence` operator has been moved to grease pencil menu.
* Interpolate Sequence now include a Redo panel.
* Interpolate tool now allows to select the strokes by pairs. This allows to interpolate any stroke with any stroke and not as before that it was only possible by drawing order. If no stroke is selected, the interpolation is done as before.
* Now is possible interpolate again if a previous keyframe exist. Before, it was impossible to interpolate two times in same frame and this made impossible to do the interpolation by groups of frames.
* New automatic option to `Flip strokes` if the stroke and end are not in the right position. Also the flip can be set manually for corner cases.
* Cleanup of menus related to interpolate.
* Fixed some bugs and removed parameters from scene because now all are tool or operator contained.
* Some code cleanup and function renames.
This commit also includes the some codebase to future implementation of the concept `Vertex Active` that now does not exist in grease pencil.
This patch implements the list panel system D7490 for FCurve modifiers.
The UI layouts are updated to make use of subpanels and to be consistent
with the rest of the interface, and easier to understand.
See the differential revision for screenshots.
This commit also significantly cleans up the FModifier UI code, and
improves, mainly by replacing the old button creation code is with
the newer interface API using RNA. In turn there is a bit of complexity
added because each FModifier has a separate panel.
Although reordering of FModifiers was not implemented before, we get
drag and drop basically for free here, so it is also included.
As noted in some older to do tasks, FModifiers aren't evaluated
in perfect order, which may be a point of improvement for the future.
Differential Revision: https://developer.blender.org/D7997
The problem was introduced fixing task T85035.
As the frame was set again when render, if there was a time modifier, the frame was not remaped to the right frame number.
Commit rBf448ff2afe7a accidentally added menu entries that were removed.
`use_zoom_to_fit` is duplicated in menu, others were moved to overlays menu.
Remove these entries.
Reviewed By: ISS, campbellbarton
Differential Revision: https://developer.blender.org/D10453
Previously, functions would have to ask for every geometry type explicitely.
Using a vector is return type is fine. In practice this will probably never
allocate because of the small buffer optimization in vector.
If the axes are aligned in auto pivot mode then the rotation axis would be (0,0,0).
We now fall back to the x axis in this case. If that fails, we fall back to the y axis.
Differential Revision: https://developer.blender.org/D10466
Previously, the density was set per point. That implies that when a
point has a non-zero weight, points might be distributed in all
connected polygons. By specifying the density per corner, this
limitation is removed. Note, per-point density maps (such as vertex
groups) can still be used. They will be adapted to the corner domain
without loss of information.
Differential Revision: https://developer.blender.org/D10461
Instead of raising an expection a warnign is generated instead. This
fixes the issue where `['hair', 'pointcloud']` are disabled for release
builds. In the future a better solution would be to generate the context
map dynamically but this would require refactoring of the API: D9988
This fixes the issue where `['hair', 'pointcloud']` are disabled for
release builds.
In the future a better solution would be to generate the context map
dynamically but this would require refactoring of the API: D9988
Fixes T80364
Differential revision: https://developer.blender.org/D10468
This is needed to support Python 3.10's `typing.get_type_hints`,
to access the name-space used when creating the class.
Also added a docstring for execfile.
When `Preferences → Editing → New Objects → Align To` is set to `3D
Cursor`, the fluid domain added by `Object → Quick Effects → Quick
Liquid` is aligned to the 3D cursor. This shouldn't be the case, since
these aren't new objects created directly by the user.
Differential Revision: https://developer.blender.org/D10467
Crash happened in versioning code on NULL dereference in function
seq_convert_transform_crop() for Strip crop and transform
fields.
Strips created after rB1fd7b380f4cf were assumed to have crop and
transform always initialized, but this wasn't the case. This has been
fixed in 2.90, but not in versioning code.
Initialize these fields if they are not initialized already.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D10463
E.g. steps to reproduce:
* Enter Vertex Paint mode
* In the tool settings, right-click > "Edit Source"
When creating a number slider via `layout.prop(..., slider=True)`, the UI code
would reallocate the number button to be a number-slider button. That's because
we now actually have different button data-structures for these (see
e6f0b60c2e). The edit source code stored data based on the button pointers,
which didn't get updated after changing the type. The fix just adds this
updating.
"Kind" is a bit less generic than "Info" for me. Especially, it implies
that the struct does not contain the name of a specific attribute
(for me anyway).
Caused by rB85fe12071ad7.
When looking at a render pass in viewport and move the camera, there's a
"flash" effect in this AOVs test file:
{F9753476}
{F9753473}
The cause seems to be that taa_current_sample when rendering
(DRW_state_is_image_render()) is ok because it has been incremented in
EEVEE_temporal_sampling_draw but taa_current_sample is wrong when we are
not rendering.
D10375 by Ulysse Martin (youle) with clang format changes.
Reviewed By: jbakker, lichtwerk, also blessing from fclem
Differential Revision: https://developer.blender.org/D10375
This allows accessing per-point attributes on the corner domain,
which can be useful e.g. when adding per-point displacement
to per-corner uv coordinates.
Also it is required to make an upcoming patch work well, that
makes the Point Distribute node use density weights per corner
instead of per point, giving the user more precise control over
the distribution.
This makes vertex colors available in geometry nodes similar to
how uvs are available. They can be used using the attribute system.
Vertex colors are stored per corner (as are uvs, but not like vertex weights).
Ref T84297.
Differential Revision: https://developer.blender.org/D10454
Previously, when a Geometry Nodes modifier outputs a point cloud
(e.g. generated using the Point Distribute node), other modifiers
could not use that data. Now, the point cloud data is converted to
mesh vertices for such modifiers.
Ref T85281.
Differential Revision: https://developer.blender.org/D10451
All headers in the svn libraries should be
building with /W0 however MSVC 16.8/16.9
has broken this functionality making OpenVDB
emit lots of warnings.
The breakage was reported [1] in august to MS
but they still have not gotten around to
addressing the issue.
This change explicitly suppresses C4251 in the
module that emitted these warnings. As the warning
is useful in other parts of blender a localized
approach is taken rather than a global suppression.
[1] https://developercommunity.visualstudio.com/content/problem/1167590/bug.html
The integer mode still needs a random value in a 0 to 1 range, just like
floats. So slightly refactor to let the integer randomization use the
float implementation and then round to an int afterwards.
From the the opengl wiki:
> Buffer objects are associated with a program's uniform block similarly to the way that texture objects are associated with sampler uniforms.
* WITH_CPU_SSE was renamed to WITH_CPU_SIMD, and now covers both SSE and Neon.
* For macOS sse2neon.h is included as part of the precompiled libraries.
* For Linux it is enabled if the sse2neon.h header file is detected. However
this library does not have official releases and is not shipped with any Linux
distribution, so manual installation and configuration is required to get this
working.
Ref D8237, T78710
Was reported for Geometry Nodes Editor "New" button, but was true for
any modifier added via modifiers.new().
Now just add appropriate nofifier.
Maniphest Tasks: T85722
Differential Revision: https://developer.blender.org/D10450
The `material_index` attribute can adjust which material in the list
will be applied to each face of the mesh. There are two new things
about this attribute that haven't been exposed by the attribute API yet.
Each comes with limitations:
1. Integer data type: Most attribute nodes are currently written to use
float data types. This means that they can't write to this attribute
because they can't change the type of a built-in attribute.
2. Polygon domain: This is our first attribute using the polygon domain,
meaning until some of the interpolations are implemented, some
operations may not work as expected.
Currently the two nodes that work with this attribute are Attribute Fill
and Attribute Randomize.
Differential Revision: https://developer.blender.org/D10444
When primitive offsets change we need to rebuild or refit BVHs, however this
was also tagging other data as modified too late in the geometry update process.
Now ensure only the BVHs are updated.
Ref D10441
To avoid anti-aliasing artifacts on GPencil strokes that have a size smaller than 1 the thickness
is clamped and the opacity reduced. This was done in vertex shader but this had the side effect
of causing strokes that go from large to small to fade across their lengths.
**Solution**
The opacity modulation has now been moved to the fragment shader as advised by Clément Foucault.
The strokeThickness that was passed to the shader was clamped to prevent it from being too small so an additional
unclamped thickness has been passed to the fragment to calculate the opacity modulation. Alternatively I could have chosen
strokeThickness and clampedThickness but I decided against renaming the variables in the current code.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D10438
Previously, when the output of a Geometry Nodes modifier would
contain instances, those could not be accessed by other existing
modifiers (e.g. the Array modifier). That is because those modifiers
don't know about instances.
Upcoming commits will improve an this in two ways:
* Also realize instances before deform modifiers.
* Convert a point cloud in the geometry to mesh vertices so that
they can be accessed as well.
Note, making instances real can result in loosing some information
that we do not support in Geometry Nodes yet. That includes some
special builtin attributes like bevel weights.
Ref T85281.
Differential Revision: https://developer.blender.org/D10432
This makes custom mesh attributes available in Cycles. Typically,
these attributes are generated by Geometry Nodes, but they can also
be created with a Python script.
* The `subdivision` code path is not yet supported.
* This does not make vertex weights and some other builtin attributes
available in Cycles, even though they are accesible in Geometry Nodes.
All attributes generated in Geometry Nodes should be accessible though.
* In some cases memory consumption could be removed by not storing all
attributes in floats. E.g. booleans and integer attributes for which
all values are within a certain range, could be stored in less than
4 bytes per element.
Differential Revision: https://developer.blender.org/D10210
This patch has originally been written by Kévin Dietrich, thanks!
It is part of D10210.
As Brecht noted in D10210, this might not handle all cases yet.
I better solution should come soonish.
Since "Applied Modifier" was always added last, it obscured more important
messages when using the shortcut to delete modifiers. The purpose of the
report when using the shortcut was to make it clear that something
happened. Since another report does that anyway, only display the
"Applied Modifier" report if the report list length hasn't changed.
Issue introduced by my commit: rB40b7929cc040
**User-level Problem**:
The issue resulted in a full-replace upper strip with only a Z location
channel full-replacing the XY location channels of the lower stack.
replaced to default. The expected behavior is that only the Z location
channel is affected.
**Technical-level Problem**:
Before the problematic commit, fcurves were blended as they were read.
So only existing animated channels would blend. My recent commit
changed the process to read all fcurve values into an isolated
upper_snapshot then blend with the lower stack. There is no data stored
to know whether the upper snapshot channel values were sampled from
fcurves or were default values. Only those sampled from fcurves should
be blended.
**Solution**:
Added a `blend_domain` bitmask member to NlaEvalChannelSnapshot.
The blending function only blends values within the `blend_domain`.
Sampled fcurve values are now marked as within the `blend_domain`.
We also now always copy the lower snapshot to the result snapshot which
only matters when they aren't the same. Currently, it's always the same
so the change is more for future unseen cases.
Reviewed By: sybren, #animation_rigging
Differential Revision: https://developer.blender.org/D10339
Windows Ghost cursor movement was previously changed to use SendInput
because SetCursorPos sporadically allows the cursor to escape the
window. This is now reverted because SendInput causes mouse history via
GetMouseMovePointsEx to contain invalid movement history, likely due to
interaction with mouse acceleration. This resulted in popups closing
when the cursor appeared to leave their range.
This patch adds icons to the right side of nodes when they encounter a
a problem. When hovered, a tooltip displays describing the encountered
while evaluating the node.
Some examples are: attribute doesn't exist, mesh has no faces,
incorrect attribute type, etc. Exposing more messages to the system
will be an ongoing process. Multiple warnings per node are supported.
The system is implemented somewhat generically so that the basic
structure can also be used to store more information from evaluation
for the interface, like a list of available attributes.
Currently the messages are just button tooltips. They could be styled
differently in the future. Another limitation is that every instance of
a node group in a parent node tree will have the same error messages,
the "evaluation context" used to decide when to display the tooltips
must be extended to support node tree paths.
Differential Revision: https://developer.blender.org/D10290
Since the derived node tree is already build for the evaluation system,
it's simpler to pass a derived node to the params struct. This will also
allow context lookups in nested node groups for node error messages,
since the derived node has that information readily accessible.
This will allow using C++ data structures to draw node error messages.
This required removing a forward declared enum for grease pencil undo.
Compiles with clang tidy.
This commit adds support for `bl_description` and python docstrings for panels.
This is useful for pop-over panel types so they can have a label and description.
This commit also includes an example use case.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D10429
When dropping an asset somewhere, it is appended and then a drop operation is
called to actually add it to the scene based on current context. If this drop
operation fails, the appended data-block is now still in the .blend. The user
may not notice and not expect this.
Instead idea is to rollback any changes done by dropping code if the operation
fails, namely removing the appended data-block again.
Adds a new `cancel()` callback which is called if the drop operator returns
`OPERATOR_CANCELLED` to drop-boxes and a generic function to deal with assets
on drop failure.
Also removes the `free_id_on_error` property of the `NODE_OT_add_group`
operator, which was used as ad-hoc solution to get this same behavior.
Fix for T84928 .
Considering the changes , issue is resolved ( Ignoring readability issues) .
**Changes **:
- `Change in value assignment of fu/v/w :` Observing previous code , I noticed ,value assigned to them is equivalent to -0.5 ( i.e. co-ordinate of left most vertex of lattice size =1 where centre of lattice is origin ) .
- `Change in value assignment of du/v/w :` Margin ( distance ) between each division of surface along any axis is equivalent to **( (length of surface along axis ) / (no of division line - 1) )** . that's why is changed it to (default_size/unew -1) .
- ` New variable declared "default_size" :` As far as I gone through the code , I noticed values 1 < du ,fu < 1 , which indicates these values were calculated with respect to default lattice of size 1 .
- `removed pntsu/v/w != 1 check :` Following changes inside the if block worked properly for pntsu/v/w = 1 .
Reviewed By: lichtwerk, campbellbarton
Differential Revision: https://developer.blender.org/D10353
The vertex weights were actually interpolated correctly. The issue was that
vertex group names were removed from the output geometry set. We have
to keep track of these names separately from the mesh, for legacy reasons.
Vertex group names are not stored on meshes but objects instead.
In an upcoming commit I'll also move the make-instances-real functionality
to this file. This code is not essential to working with geometry sets in general,
so it makes sense to move it to a separate header.
The logic to remove one Python module before installing another
only worked in simple cases where a file replaced a file.
- Installing a single file add-on over a Python package with the same
name caused an error as the directory isn't empty.
- Removing existing module directories from the zip-file did nothing
as the directories from the zip-file that end with a slash were
compared with directories from `os.listdir` that don't.
- `module_filesystem_remove` assumed ZipFile.namelist() was a list of
files in the root of the zip-file when it's a list of all files.
While I couldn't find any bugs caused by this, it performed checks
that don't make sense, comparing files at different depths of the
file-system.
This improves stability and convergence speed of Workbench Temporal AntiAliasing.
This adds a filtering kernel (blackmann-haris, same as EEVEE/Cycles) to the
temporal antialiasing sampling. We also gather neighbor pixels since they might
end up in the pixel footprint.
We use a 1px radius for the filter window which is a bit less than the 1.5 default
of cycles and EEVEE since it does blur quite a bit more than what we have now.
Another improvement is that the filtering is now in log space which improves
AntiAliasing around highlights.
Theses improvement may not be very useful for every day case but it was an
experiment to try to make TAA usable for GPencil.
Test file used :
{F9798807}
|filtered+logspace|filtered|original|
|{F9798847}|{F9798848}|{F9798849}|
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D10414
This revert removes handling of cursor move and button press events
during Wintab's WT_PACKET event, instead storing pressure and tilt
information to be combined with Window's WM_MOUSEMOVE events.
This also reverts dynamic enabling and disabling of Wintab, dependent
on the chosen Tablet API. If the Tablet API is not explictly Windows
Ink during startup, Wintab is loaded and enabled.
Left in place is a fallback to Windows Ink when the Tablet API is set
to Automatic and no Wintab devices are present. This allows devices
with Wintab installed but not active to fallback to Windows Ink.
Using position provided by Wintab was found to have too many
regressions to include in Blender 2.93. The primary source of
regressions was tablets which mapped coordinates incorrectly on multi-
monitor and scaled displays. This resulted in an offset between what
the driver controlled Win32 cursor position and the Wintab reported
position. A special case of this included tablets set to mouse mode,
where Wintab reported absolute position while the system cursor moved
as a relative mouse with mouse acceleration.
Reloading preferences didn't update Python's `sys.path` to account
for the modified `script_directory`.
This meant the operator to load settings from a previous version
required a restart to initialize Python when this directory was set.
Updates the descriptions and labels for outliner sync in the properties
editor popover to be more clear.
Differential Revision: https://developer.blender.org/D10010
Updates the descriptions and labels for outliner sync in the properties
editor popover to be more clear.
Differential Revision: https://developer.blender.org/D10010
Blender would crash when selecting multiple keyframes while multiframe edit was
active. This was due to the active frame being NULL in some instances.
The fix checks if the active frame is not NULL.
Reviewed By: antoniov
Maniphest Tasks: T85587
Differential Revision: https://developer.blender.org/D10421
This required using a fork of Embree, newer LLVM version, unreleased ISPC
version and sse2neon directly from Git. Hopefully over time all the required
changes end up in official releases. For now we deviate from other platforms.
Based on contributions by Apple and Stefan Werner.
Ref D9527, D8237, T78710
Building NumPy from source with default options of builder
causes it to link against Accelerate framework which is buggy and
raises a warning mentioned in [2].
"RankWarning: Polyfit may be poorly conditioned"
Accelerate is deprecated with NumPy 1.20+.[1]
So either we build OpenBLAS in dependencies also and set appropriate
env variables suggested in [1] while building NumPy for it to find
OpenBLAS. Or download NumPy wheel from pip and never allow pip to
build NumPy from source while installing.
After this change, pip wheels are used for NumPy for macOS with x86_64.
[1] https://numpy.org/doc/stable/user/building.html#lapack
[2] https://github.com/numpy/numpy/issues/15947
Reviewed By: #platform_macos, sebbas
Differential Revision: https://developer.blender.org/D10368
A fix for T83187 (rBf83aa830) assumed in the overlay code of the uv editor that the object was a mesh
when it did not have to be - causing a crash.
The fix makes sure that the object is a mesh.
Reviewed By: jbakker, campbellbarton
Maniphest Tasks: T85499, T85495
Differential Revision: https://developer.blender.org/D10369
Adds `NODE_OT_add_group` operator to add a node group from a given name, and
uses that to register a node editor drop-box.
When dropping a node-group asset, the ID will be appended. This is what we do
for other ID assets too.
Should the node group insertion fail (e.g. the group is not compatible with the
current tree, as checked by the poll), the appended data-block is removed.
Differential Revision: https://developer.blender.org/D10405
Reviewed by: Jacques Lucke
This is because the node editor added a "real user" to the node group
that it displays. It was mainly added as a hack to solve issues with custom
tree types (T36024). Since we can store id references in custom properties
now, this "real user" is not really necessary anymore.
Given that we are close to a release, I'll only disable line for geometry nodes,
for which the bug has been reported.
Discussed this solution with Hans Goudey.
This reverts a part of rBd3960164163c910d5031a8f076c41b39e0a5503d.
It is not a `std::shared_ptr` but a `boost::shared_ptr`.
This could probably be fixed differently, but `NOLINT` is fine now.
Following code from D8627 this patch corrects multi threaded processing
of proxies, where a 60 sec proxy generation drops to 35 sec.
Differential Revision: https://developer.blender.org/D8659
Allow use all system threads for frame encoding/decoding. This is very
straightforward: the value of zero basically disables threading.
Change threading policy to slice when decoding frames. The reason for
this is because decoding happens frame-by-frame, so inter-frame threading
policy will not bring any speedup.
The change for threading policy to slice is less obvious and is based on
benchmark of the demo files from T78986. This gives best performance so
far.
Rendering the following file went down from 190sec down to 160sec.
https://storage.googleapis.com/institute-storage/vse_simplified_example.zip
This change makes both reading and writing faster. The animation render
is just easiest to get actual time metrics.
Differential Revision: https://developer.blender.org/D8627
USD version 21.02 includes two of the changes Blender used to patch in,
which have now been removed from `usd.diff`. Unfortunately 21.02
introduces another issue where LZ4 symbols are accidentally exported,
causing linker errors. Fortunately these symbols are only used for
resting, so I added a patch hunk that simply removes their `extern "C"`
declaration.
The LZ4 linker issue has been reported upstream at
https://github.com/PixarAnimationStudios/USD/issues/1447.
Reviewed By: sebbas, mont29
Differential Revision: https://developer.blender.org/D10367
Straight up version bump
Things of note:
They started using API calls only available in windows 8, however given
the Python 3.9 update will forcibly bump us to 8.1+ anyhow this is not
an issue.
Will require some minor tweaks to platform_win32.cmake after adding the
libs to svn which are not included in this diff so this diff can land
without having to have the libs in place yet.
Reviewed By: sebbas, sybren
Differential Revision: https://developer.blender.org/D10349
Straight forward version bump, some of the variables to detect a static
OpenEXR changed and the folder structure seemingly changed a little
requiring updates to the diff
Reviewed By: sebbas, sybren
Differential Revision: https://developer.blender.org/D10340
Version bump + no longer using Boost.
Building Alembic with Boost gave compiler errors, and having one less
inter-dependency is good as well.
Reviewed By: sebbas, sybren
Differential Revision: https://developer.blender.org/D10329
Straight forward version bump.
2020U2 is significantly louder in the deprecated header usage warning
department, we should probably see if we need to act on this: P1949
Differential Revision: https://developer.blender.org/D10359
Previously `mesh.attributes.new(...)` would return a generic attribute that
one could not do much with. Now it returns refined attributes like `FloatAttribute`.
Add a boundary check, avoiding access past actual data.
Ideally would need to report error to the user somehow,
but it doesn't seem to be easy to do.
This is a minimal safe patch. The proper complete fix is
being worked on by Jesse.
Differential Revision: https://developer.blender.org/D10357
The inset operator would display the inset thickness and depth as
Blender units during transform. This meant that when the scene units
were set to something different than meters, the display value would
give different results than entering the same number using the value
input. (Similar to D10325)
The fix makes sure that the numbers are always displayed in the correct
scene units.
Reviewed By: campbellbarton
Maniphest Tasks: T85488
Differential Revision: https://developer.blender.org/D10366
Cycles has supported path-traced subsurface scattering for a while, but while it's
more accurate than other approaches, the increase in noise makes it an expensive option.
To improve this, this patch implements Dwivedi guiding, a technique that is based on
zero-variance random walk theory from particle physics and helps to produce shorter
random walks with more consistent throughput.
The idea behind this is that in non-white materials, each scattering event inside the
medium reduces the path throughput. Therefore, the darker the material is, the lower the
contribution of paths that travel far from the origin is.
In order to reduce variance, Dwivedi guiding uses modified direction and distance sampling
functions that favor paths which go back towards the medium interface.
By carefully selecting these sampling distributions, variance can be greatly reduced, and
as a neat side effect shorter paths are produced, which speeds up the process.
One limitation of just blindly applying this is that the guiding is derived from the
assumption of a medium that covers an infinite half-space. Therefore, at corners or thin
geometry where this does not hold, the algorithm might lead to fireflies.
To avoid this, the implementation here uses MIS to combine the classic and guided sampling.
Since each of those works on one of the three color channels, the final estimator combines
six sampling techniques. This results in some unintuitive math, but I tried to structure
it in a way that makes some sense.
Another improvement is that in areas where the other side of the mesh is close (e.g. ears),
the algorithm has a chance to switch to guiding towards the other side. This chance is based
on how deep the random walk is inside the object, and once again MIS is applied to the
decision, giving a total of nine techniques.
Combining all this, the noise of path-traced subsurface scattering is reduced significantly.
In my testing with the Rain character model and a simple lighting setup, the path-traced
SSS is now actually less noisy than the Christensen-Burley approximation at same render time
while of course still being significantly more realistic.
Differential Revision: https://developer.blender.org/D9932
This resolves build error with Py3.9x, use meson build system
since autoconf/automake are no longer supported.
This adds ninja & meson as dependencies for Linux.
Reviewed By: brecht, sybren
Ref D10282
Getting an "ouput" attribute is equivalent to creating an attribute and
then getting a write attribute. Replace the latter with the former for
consistency with other code, and to decrease the used surface area
of the attribute API to hopefully facilitate future cleanup.
Corrects approximately 36 spelling errors in source variable names.
Differential Revision: https://developer.blender.org/D10347
Reviewed by Hans Goudey
This changes the roughness mapping to better utilize the mip chain resolution.
This improves glossy reflections with small roughness.
Lightcache version bumped because old data does not have the same roughness
mapping and cannot be used.
This modifies the principled BSDF and the Glass BSDF which now
have better fit to multiscatter GGX.
Code to generate the LUT have been updated and can run at runtime.
The refraction LUT has been changed to have the critical angle always
centered around one pixel so that interpolation can be mitigated.
Offline LUT data will be updated in another commit
This simplify the BTDF retreival removing the manual clean cut at
low roughness. This maximize the precision of the LUT by scalling
the sides by the critical angle.
I also touched the ior > 1.0 approximation to be smoother.
Also incluse some cleanup of bsdf_sampling.glsl
This refactor was needed for some reasons:
- closure_lit_lib.glsl was unreadable and could not be easily extended to use new features.
- It was generating ~5K LOC for any shader. Slowing down compilation.
- Some calculations were incorrect and BSDF/Closure code had lots of workaround/hacks.
What this refactor does:
- Add some macros to define the light object loops / eval.
- Clear separation between each closures which now have separate files. Each closure implements the eval functions.
- Make principled BSDF a bit more correct in some cases (specular coloring, mix between glass and opaque).
- The BSDF term are applied outside of the eval function and on the whole lighting (was separated for lights before).
- Make light iteration last to avoid carrying more data than needed.
- Makes sure that all inputs are within correct ranges before evaluating the closures (use `safe_normalize` on normals).
- Making each BSDF isolated means that we might carry duplicated data (normals for instance) but this should be optimized by compilers.
- Makes Translucent BSDF its own closure type to avoid having to disable raytraced shadows using hacks.
- Separate transmission roughness is now working on Principled BSDF.
- Makes principled shader variations using constants. Removing a lot of duplicated code. This needed `const` keyword detection in `gpu_material_library.c`.
- SSR/SSS masking and data loading is a bit more consistent and defined outside of closure eval. The loading functions will act as accumulator if the lighting is not to be separated.
- SSR pass now do a full deferred lighting evaluation, including lights, in order to avoid interference with the closure eval code. However, it seems that the cost of having a global SSR toggle uniform is making the surface shader more expensive (which is already the case, by the way).
- Principle fully black specular tint now returns black instead of white.
- This fixed some artifact issue on my AMD computer on normal surfaces (which might have been some uninitialized variables).
- This touched the Ambient Occlusion because it needs to be evaluated for each closure. But to avoid the cost of this, we use another approach to just pass the result of the occlusion on interpolated normals and modify it using the bent normal for each Closure. This tends to reduce shadowing. I'm still looking into improving this but this is out of the scope of this patch.
- Performance might be a bit worse with this patch since it is more oriented towards code modularity. But not by a lot.
Render tests needs to be updated after this.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D10390
# Conflicts:
# source/blender/draw/engines/eevee/eevee_shaders.c
# source/blender/draw/engines/eevee/shaders/common_utiltex_lib.glsl
# source/blender/draw/intern/shaders/common_math_lib.glsl
Removes values from various Outliner context menu enums that were unused.
Many of these had been commented out for years. Also deletes some
unused code related to the removed enums. No functional changes.
A few related improvements to the three functions:
- Reduce variable scope
- Use for loops instead of while loops
- Use const, bool instead of int
- Generally make logic easier to read
This is a complete refactor over the old system. The goal was to increase quality
first and then have something more flexible and optimised.
|{F9603145} | {F9603142}|{F9603147}|
This fixes issues we had with the old system which were:
- Too much overdraw (low performance).
- Not enough precision in render targets (hugly color banding/drifting).
- Poor resolution near in-focus regions.
- Wrong support of orthographic views.
- Missing alpha support in viewport.
- Missing bokeh shape inversion on foreground field.
- Issues on some GPUs. (see T72489) (But I'm sure this one will have other issues as well heh...)
- Fix T81092
I chose Unreal's Diaphragm DOF as a reference / goal implementation.
It is well described in the presentation "A Life of a Bokeh" by Guillaume Abadie.
You can check about it here https://epicgames.ent.box.com/s/s86j70iamxvsuu6j35pilypficznec04
Along side the main implementation we provide a way to increase the quality by jittering the
camera position for each sample (the ones specified under the Sampling tab).
The jittering is dividing the actual post processing dof radius so that it fills the undersampling.
The user can still add more overblur to have a noiseless image, but reducing bokeh shape sharpness.
Effect of overblur (left without, right with):
| {F9603122} | {F9603123}|
The actual implementation differs a bit:
- Foreground gather implementation uses the same "ring binning" accumulator as background
but uses a custom occlusion method. This gives the problem of inflating the foreground elements
when they are over background or in-focus regions.
This is was a hard decision but this was preferable to the other method that was giving poor
opacity masks for foreground and had other more noticeable issues. Do note it is possible
to improve this part in the future if a better alternative is found.
- Use occlusion texture for foreground. Presentation says it wasn't really needed for them.
- The TAA stabilisation pass is replace by a simple neighborhood clamping at the reduce copy
stage for simplicity.
- We don't do a brute-force in-focus separate gather pass. Instead we just do the brute force
pass during resolve. Using the separate pass could be a future optimization if needed but
might give less precise results.
- We don't use compute shaders at all so shader branching might not be optimal. But performance
is still way better than our previous implementation.
- We mainly rely on density change to fix all undersampling issues even for foreground (which
is something the reference implementation is not doing strangely).
Remaining issues (not considered blocking for me):
- Slight defocus stability: Due to slight defocus bruteforce gather using the bare scene color,
highlights are dilated and make convergence quite slow or imposible when using jittered DOF
(or gives )
- ~~Slight defocus inflating: There seems to be a 1px inflation discontinuity of the slight focus
convolution compared to the half resolution. This is not really noticeable if using jittered
camera.~~ Fixed
- Foreground occlusion approximation is a bit glitchy and gives incorrect result if the
a defocus foreground element overlaps a farther foreground element. Note that this is easily
mitigated using the jittered camera position.
|{F9603114}|{F9603115}|{F9603116}|
- Foreground is inflating, not revealing background. However this avoids some other bugs too
as discussed previously. Also mitigated with jittered camera position.
|{F9603130}|{F9603129}|
- Sensor vertical fit is still broken (does not match cycles).
- Scattred bokeh shapes can be a bit strange at polygon vertices. This is due to the distance field
stored in the Bokeh LUT which is not rounded at the edges. This is barely noticeable if the
shape does not rotate.
- ~~Sampling pattern of the jittered camera position is suboptimal. Could try something like hammersley
or poisson disc distribution.~~Used hexaweb sampling pattern which is not random but has better
stability and overall coverage.
- Very large bokeh (> 300 px) can exhibit undersampling artifact in gather pass and quite a bit of
bleeding. But at this size it is preferable to use jittered camera position.
Codewise the changes are pretty much self contained and each pass are well documented.
However the whole pipeline is quite complex to understand from bird's-eye view.
Notes:
- There is the possibility of using arbitrary bokeh texture with this implementation.
However implementation is a bit involved.
- Gathering max sample count is hardcoded to avoid to deal with shader variations. The actual
max sample count is already quite high but samples are not evenly distributed due to the
ring binning method.
- While this implementation does not need 32bit/channel textures to render correctly it does use
many other textures so actual VRAM usage is higher than previous method for viewport but less
for render. Textures are reused to avoid many allocations.
- Bokeh LUT computation is fast and done for each redraw because it can be animated. Also the
texture can be shared with other viewport with different camera settings.
This commit adds a drop-down to the attribute randomize node to support
a few operations on the values of existing attributes: "Replace/Create"
(the existing behavior), "Add", "Subtract", and "Multiply".
At this point, the operations are limited by what is simple to implement.
More could be added in the future, but there isn't a strong use case
for more complex operations anyway, and a second math node can be used.
Differential Revision: https://developer.blender.org/D10269
Currently every attribute node assumes that the attribute exists on the
"points" domain, so it generally isn't possible to work with attributes
on other domains like edges, polygons, and corners.
This commit adds a heuristic to each attribute node to determine the
correct domain for the result attribute. In general, it works like this:
- If the output attribute already exists, use that domain.
- Otherwise, use the highest priority domain of the input attributes.
- If none of the inputs are attributes, use the default domain (points).
For the implementation I abstracted the check a bit, but in each
node has a slightly different situation, so we end up with slightly
different `get_result_domain` functions in each node. I think this makes
sense, it keeps the code flexible and more easily understandable.
Note that we might eventually want to expose a domain drop-down to some
of the nodes. But that will be a separate discussion; this commit focuses
on making a more useful choice automatically.
Differential Revision: https://developer.blender.org/D10389
Removal of Win32 code that allows background windows to receive raw input.
Differential Revision: https://developer.blender.org/D10408
Reviewed by Brecht Van Lommel
Ref T84819
Build System
============
This is an API breaking new version, and the updated code only builds with
OpenColorIO 2.0 and later. Adding backwards compatibility was too complicated.
* Tinyxml was replaced with Expat, adding a new dependency.
* Yaml-cpp is now built as a dependency on Unix, as was already done on Windows.
* Removed currently unused LCMS code.
* Pystring remains built as part of OCIO itself, since it has no good build system.
* Linux and macOS check for the OpenColorIO verison, and disable it if too old.
Ref D10270
Processors and Transforms
=========================
CPU processors now need to be created to do CPU processing. These are cached
internally, but the cache lookup is not fast enough to execute per pixel or
texture sample, so for performance these are now also exposed in the C API.
The C API for transforms will no longer be needed afer all changes, so remove
it to simplify the API and fallback implementation.
Ref D10271
Display Transforms
==================
Needs a bit more manual work constructing the transform. LegacyViewingPipeline
could also have been used, but isn't really any simpler and since it's legacy
we better not rely on it.
We moved more logic into the opencolorio module, to simplify the API. There is
no need to wrap a dozen functions just to be able to do this in C rather than C++.
It's also tightly coupled to the GPU shader logic, and so should be in the same
module.
Ref D10271
GPU Display Shader
==================
To avoid baking exposure and gamma into the GLSL shader and requiring slow
recompiles when tweaking, we manually apply them in the shader. This leads
to some logic duplicaton between the CPU and GPU display processor, but it
seems unavoidable.
Caching was also changed. Previously this was done both on the imbuf and
opencolorio module levels. Now it's all done in the opencolorio module by
simply matching color space names. We no longer use cacheIDs from OpenColorIO
since computing them is expensive, and they are unlikely to match now that
more is baked into the shader code.
Shaders can now use multiple 2D textures, 3D textures and uniforms, rather
than a single 3D texture. So allocating and binding those adds some code.
Color space conversions for blending with overlays is now hardcoded in the
shader. This was using harcoded numbers anyway, if this every becomes a
general OpenColorIO transform it can be changed, but for now there is no
point to add code complexity.
Ref D10273
CIE XYZ
=======
We need standard CIE XYZ values for rendering effects like blackbody emission.
The relation to the scene linear role is based on OpenColorIO configuration.
In OpenColorIO 2.0 configs roles can no longer have the same name as color
spaces, which means our XYZ role and colorspace in the configuration give an
error.
Instead use the new standard aces_interchange role, which relates scene linear
to a known scene referred color space. Compatibility with the old XYZ role is
preserved, if the configuration file has no conflicting names.
Also includes a non-functional change to the configuraton file to use an
XYZ-to-ACES matrix instead of REC709-to-ACES, makes debugging a little easier
since the matrix is the same one we have in the code now and that is also
found easily in the ACES specs.
Ref D10274
Currently moving or changing an object references in a node modifier's
node group does not trigger re-evaluation. Because there is no collection
relation in the dependency graph, we must add the relation to all objects
in the collection individually.
This commit makes the geometry output of the collection info usable.
The output is the geometry of a collection instance, but this commit
adds a utility to convert the instances to real geometry, used in the
background whenever it is needed, like copy on write.
The recursive nature of the "realize instances" code is essential,
because collection instances in the `InstancesComponent`, might have no
geometry sets of their own containing even more collection instances,
which might then contain object instances, etc.
Another consideration is that currently, every single instance contains
a reference to its data. This is inefficient since most of the time
there are many locations and only a few sets of unique data. So this
commit adds a `GeometryInstanceGroup` to support this future optimization.
The API for instances returns a vector of `GeometryInstanceGroup`.
This may be less efficient when there are many instances, but it makes
more complicated operations like point distribution that need to iterate
over input geometry multiple times much simpler.
Any code that needs to change data, like most of the attribute nodes,
can simply call `geometry_set_realize_instances(geometry_set)`,
which will move any geometry in the `InstancesComponent` to new "real"
geometry components.
Many nodes can support read-only access to instances in order to avoid
making them real, this will be addressed where needed in the near future.
Instances from the existing "dupli" system are not supported yet.
Differential Revision: https://developer.blender.org/D10327
Ids stored in the `id` attribute cannot be assumed to be unique. While they
might be unique in some cases, this is not something that can be guaranteed
in general. For some use cases (e.g. generating "stable randomness" on points)
uniqueness is not important. To support features like motion blur, unique ids
are important though.
This patch implements a simple algorithm that turns non-unique ids into
unique ones. It might fail to do so under very unlikely circumstances, in
which it returns non-unique ids instead of possibly going into an endless
loop.
Here are some requirements I set for the algorithm:
* Ids that are unique already, must not be changed.
* The same input should generate the same output.
* Handle cases when all ids are different and when all ids are the same
equally well (in expected linear time).
* Small changes in the input id array should ideally only have a small
impact on the output id array.
The reported bug happened because cycles found multiple objects with
the same id and thought that it was a single object that moved on every
check.
Differential Revision: https://developer.blender.org/D10402
The problem was the stroke was reproject flat to view if the axis was View. Now, if the operation is using depth, the stroke is not reprojected.
Related to T85082
Baking vertex colors per-corner leads to unwanted discontinuities when there is
sampling noise, for example in ambient occlusion or with a bevel shader node for
normals. For this reason the code used to always average results per-vertex.
However when using split normals, multiple materials or UV islands, we do want to
preserve discontinuities. So now bake per corner, but make sure the sampling seed
is shared for vertices.
Fix T85550: vertex color baking crash with split normals, Ref D10399
Fix T84663: vertex color baking blending at UV seams
Create zero-byte manual page files `nasm.1` and `ndisasm.1` such that
nasm's `make install` step succeeds.
Installing nasm requires that its manual pages are built. This requires
local packages `asciidoc` and `xmlto` to be installed.
Not only does `asciidoc` pull in 110 MB of packages (itself +
dependencies), there is also no need for these manual pages. Nasm is
just used for building other dependencies, and not even part of our
precompiled libraries in SVN.
Reviewed By: sebbas
Differential Revision: https://developer.blender.org/D10396
The nodes update function geo_node_volume_to_mesh_update would not run
if it is not the very first node in the tree.
If the update function is not run, there are sockets not cleared from
the SOCK_UNAVAIL flag (but this needs to be done -- these get available
depending on the chosen mode).
Havent tracked down why this was actually updating when it was the first
node in the tree, but now make sure we always get an update by specifing
an appropriate RNA update callback for the property.
Maniphest Tasks: T85558
Differential Revision: https://developer.blender.org/D10403
This patch will share the AOV settings between Cycles and Eevee.
It enable using the AOV name conflict detection of Blender. This
means that unlike how Cycles used to work it isn't possible to add an
AOV with a similar name. Conflicts with internal render pass names will
be indicated with an Warning icon.
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D9774
This makes it so that normals are tagged dirty whenever the position
attribute is requested for writing. This seems like a good default. If the
calling code is aware of normals, it could untag normals when they are
not changed by the operation.
Differential Revision: https://developer.blender.org/D10397
In 2.81 there was a change to increase the performance of viewport
animation rendering. This change would perform the color management on the
GPU if the only 8bit was needed. This saved CPU cycles and data
transfer.
The issue is that in the image editor or when saving the image the CM
will be reapplied. Although the speed is desired, exporting the actual
colors has more priority.
In the ticket there is an analysis that shows that shows that this fix
is the correct short term step to take. It would be better that the
render result is aware of the color space of its buffers so the applying
color management could be skipped when saving to disk or drawing in the
image editor.
The issue with this change is the performance penalty it has.
Reviewed By: Brecht van Lommel
Maniphest Tasks: T79999
Differential Revision: https://developer.blender.org/D10371
In 2.81 there was a change to increase the performance of viewport
animation rendering. This change would perform the color management on the
GPU if the only 8bit was needed. This saved CPU cycles and data
transfer.
The issue is that in the image editor or when saving the image the CM
will be reapplied. Although the speed is desired, exporting the actual
colors has more priority.
In the ticket there is an analysis that shows that shows that this fix
is the correct short term step to take. It would be better that the
render result is aware of the color space of its buffers so the applying
color management could be skipped when saving to disk or drawing in the
image editor.
The issue with this change is the performance penalty it has.
Reviewed By: Brecht van Lommel
Maniphest Tasks: T79999
Differential Revision: https://developer.blender.org/D10371
The previous behavior meant that changing an objects visibility
effectively changed the current mode - which missed necessary
updates for the tool-system (for example).
There was already a check for edit-mode, now expected to all modes.
This makes the test-case described in T83013 work as expected.
Adds a new property called "Confirm On Release" that does what it says,
confirm the action without having to do left-click or to press any other
extra-key which concludes in a more dynamic and efficient way of changing
brush size or strength for example, especially for tablet users.
Reviewed By: campbellbarton
Ref D10233
- Move non-blender build targets into their own section.
- Expand 'make help' text, noting a local 'make deps' overrides.
- Note where the spell checkers word-list is maintained.
- Note on why sqlite is built without 'tcl'.
Use Python 3.8's API for setting the initial configuration.
This replaces a mix of our logic and direct calls to the Python API
and has no user visible changes.
Using the Python API makes the logic easier to follow and provides
utilities such as `PyConfig_SetBytesArgv`
that wasn't available in previous releases.
Note that this uses Python's utf8/wchar_t conversions,
which used to cause problems (see T31506).
Since `Py_UTF8Mode` was set, the systems locale isn't used for decoding,
allowing us to use Python's utility functions that call
`Py_DecodeLocale` internally.
Ref D10382
MeshTest now compares selection between evaluated mesh and expected mesh. This way, we can test more operators
such as `faces_select_linked_flat`
Note: selection comparison intentionally does not happen in BKE_mesh_cmp() on C side but rather on Python side, because
selection is independent of mesh generation.
Reviewed By: calra, mont29
Differential Revision: https://developer.blender.org/D10279
Paths and names of system packages-installed libhpdf on Debian (and
probably its derived distributions?) are slightly different than what
was given to CMake finding script.
Print number of total tests with each test to show how many tests have been executed and how many are left.
Example: `Running test 27/36: PlaneFaceSplitByEdges...`
Reviewed By: calra, mont29
Differential Revision: https://developer.blender.org/D10278
Tests are not identified with indexes, so no need to maintain comments with indexes anymore
Reviewed By: calra, mont29
Differential Revision: https://developer.blender.org/D10277
Having a vertex group in a mesh slowed down unrelated operations
such as selection.
De-duplicating custom-data arrays for layers that contain pointers
can become slow without any benefit as the content never matches.
Use full copies when storing custom-data for edit-mesh undo.
Caused by rB0f95f51361d7.
Similar to T85515, T84717 and their related fixes.
In this case, add missing shading notifier as in rB9274bd457a25.
Maniphest Tasks: T85543
Differential Revision: https://developer.blender.org/D10395
This crash is caused by accessing object data in the kernel at an out of bound index from a deleted instance.
Cycles represents instances as Object nodes sharing the same Geometry node, so we need to tag the GeometryManager for an update if some objects are added or removed as no geometry might have been added or removed in order to properly update the BVH and its associated data arrays.
Regression caused by rBbbe6d4492823.
It's not necessary to check if the link has to be removed,
if it was removed already.
This regression was caused by rB8f707a72e81833bb835324ddc635b29dfbe87a9f.
This commit makes links connected to multi-input sockets spread verticaly
along the socket. Sockets grow if more links are connected and the node
layout updates accordingly. Links are sorted by their incoming angle
to avoid crossing links. Also, link picking is updated to work with
spread links and bezier links.
Currently the multi-input sockets are used in the join geometry node.
The mutli-input sockets look like a vertical rounded rectangle.
Currently they do not support the other custom socket shapes.
Reviewed By Hans Goudey, with cleanup and additional edits
Differential Revision: https://developer.blender.org/D10181
This updates the join node to use the new multi-input socket from D10067.
The change just requires slightly changing the arguments of the exec
function, and changing the socket input list.
Note that this commit does not contain the UI changes, it only allows for
more input links, and combines the two sockets into one. The UI changes
will come next.
Reviewed By: Hans Goudey
Differential Revision: https://developer.blender.org/D10069
The triangle overlap test failed for exactly overlapping triangles.
When none of the segments intersect, testing a if a single corner
is inside the other triangle fails when the triangles share UV
coordinates.
Resolve by comparing the triangle centers.
* USD and OpenVDB headers use deprecated TBB headers, suppress all deprecation
warnings there since we have no control over them.
* For our own TBB includes, use the individual headers rather than the tbb.h that
includes everything to avoid warnings, rather than suppressing all.
This is in anticipation of the TBB 2020 upgrade in D10359. Ref D10361.
Currently, `createTransData` is doing much more than the name implies.
This commit makes it clearer through smaller and more specific functions
what the real purpose of that function.
For the debug version of cython pip was trying to link
against the release version of python for some strange
reason. Passing some flags to explicitly target the
debug version fixes the issue.
Given other platforms do not have different builds for
debug/release this is not an issue there.
This removes indentations from if statements by converting them to early
returns and continue.
Most of the code of brushes and tools has loops with a full indented
body inside of an if, which was also copied into some of the new tools.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10333
This potentially could fix some missed cases in dependency tagging (when
dealing with overrides hierarchies), since relying on tag in ID itself
is not a good idea to check whether an ID has been propcessed or not
(exterior code may have forced that tag on some IDs e.g., which would
prevent them from ever being processed properly).
The local orientation chosen was that of the active object, but as
confirmed in other parts of the code, the orientation of the selected
Bone has priority.
Caused by rB5b34d11b55e0.
Above commit restored the view matrices in ED_view3d_draw_offscreen
_before_ they can be stored in the ImBuff (see ED_view3d_draw_offscreen
/ texture_paint_image_from_view_exec).
Now make restoring the view matrices optional and dont do this in case
of reprojection, so the used matrices can still be saved in the ImBuff
later.
Reviewed By: campbellbarton
Maniphest Tasks: T85395
Differential Revision: https://developer.blender.org/D10331
Fixes an issue in a node setup with the point separate node, where muting
a node that does nothing breaks the operation, resulting in the point
separate not copying the position attrbute to either result.
The fix is straightfoward, it looks just like a typo.
Differential Revision: https://developer.blender.org/D10379
After {rBa0867f05a48e2017a}, it is no longer necessary to pad
structs with 1 and 2 byte sizes. Most of these are geometry node
structs, where we've been avoiding using `node.custom1`.
I only found two others, the freestyle flags in custom data DNA.
Differential Revision: https://developer.blender.org/D10335
This fixes two issues that were preveting normal orientation for working:
- The translation of component of the object matrix should not be
considered when converting a normal to world space.
- Whe using cursor for depth, the depth for the shape should be taken
directly from the cursor (which is already unprojected and updated)
instead of from the brush, which may have not been updated.
Reviewed By: dbystedt, JacquesLucke
Differential Revision: https://developer.blender.org/D10231
Simplification of window creation code to allow greater flexibility.
Differential Revision: https://developer.blender.org/D10311
Reviewed by Brecht Van Lommel
The texture paint mode was accidentally removed from the list
Reviewed By: JacquesLucke
Maniphest Tasks: T83047
Differential Revision: https://developer.blender.org/D10216
The thumb brush was updating the area normal per brush sample, which was
making unstable sampled normals for setting the displacement direction
when the vertices are moved too much from their original positions.
Now it always uses the original normal except when using anchored
strokes. In those cases, the normal always needs to be updated.
Reviewed By: JacquesLucke
Maniphest Tasks: T85079
Differential Revision: https://developer.blender.org/D10214
The following packages also have received updates:
- IDNA 2.10
- CHARDET 4.0.0
- URLLIB3 1.26.3
- CERTIFI 2020.12.5
- REQUESTS 2.25.1
- NUMPY 1.19.5
numpy has gained a hard dependency on cython:
- CYTHON 0.29.21
Notes:
- This only updates the build environment files,
once these are built, Blender can default to Python 3.9.
- The 'm' suffix for Python binaries/libs has been removed.
- The macOS patch in Python 3.7 is has been removed.
Reviewed By: sybren, campbellbarton, sebbas
Ref D10257
The span fill was in multithreaded code, so calculated values were
sometimes reset. The fix is to move FLT_MAX fill outside of parallel_for.
Differential Revision: https://developer.blender.org/D10378
This potentially could fix some missed cases in dependency tagging (when
dealing with overrides hierarchies), since relying on tag in ID itself
is not a good idea to check whether an ID has been propcessed or not
(exterior code may have forced that tag on some IDs e.g., which would
prevent them from ever being processed properly).
The render visibility column in the outliner should be enabled by
default. This change makes it more obvious which objects will be
rendered which can be misleading when only viewport visibility toggles
are shown by default. This commit enables the render visibility column
in all existing and new Outliner editors.
Differential Revision: https://developer.blender.org/D10365
Invalid override properties ( i.e. invalid RNA paths) are not strictly
speaking errors, many things can lead to that situation. Just ignore and
skip those cases.
These are similar to the regular "Combine XYZ" and "Separate XYZ" nodes,
but they work on attributes. They will make it easier to switch between
vector attributes and float attributes.
Differential Revision: https://developer.blender.org/D10308
The repository information for cloning the OpenXR repository, rather than just
downloading the source archive, was outdated.
* Use the OpenXR-SDK repository link, not the OpenXR-SDK-Source one. Only the
former is needed, it contains pregenerated files with minimum dependencies.
The latter contains additional tools and the un-generated source files.
* Update the commit hash to the version we currently use, 1.0.14 (was 1.0.6).
Differential Revision: https://developer.blender.org/D10373
Reviewed by: Bastien Montagne
Properly fully extract
`lib_override_hierarchy_dependencies_recursive_tag` from
`lib_override_linked_group_tag`.
Was supposed to be that way already (see comment of
`lib_override_linked_group_tag`), for some reasons this case was missed.
As shown on the T85383, attempts are made to edit the precision mode key.
But that key was hardcoded.
That key now appears among the custom modal keymap items.
Add a bar between keyframes to indicate that keyframe is still used. This is part of a change to make the rec button be used by gpencil.
Example:
Before:
{F9592704}
After:
{F9592702}
Reviewed By: #user_interface, #grease_pencil, pepeland, Severin
Maniphest Tasks: T85463
Differential Revision: https://developer.blender.org/D10179
This commit is a refactor of the fill tool to solve several problems we had since the first version of the tool.
Changes:
* The filling speed has been improved for each step of the process with the optimization of each algorithm/function.
* New `AutoFit` option to fill areas outside of the viewport. When enable, the total size of the frame is calculated to fit the filling area.
* New support multiframe filling. Now it is possible to fill multiple similar frames in one go.
* New `Stroke Extension` option to create temporary closing strokes. These strokes can be displayed and adjusted dynamically using wheel mouse or PageUp/Down keys.
* Parameter `Resolution` now is named `Precision` and has been moved to topbar.
* `Resolution` now has decimals and can be lower than 1 to allow quick filling in storyboarding workflows. Maximum value has been set as 5.
* Parameter `Simplify` has been moved to Advanced panel.
* Improved fill outline detection. In some cases, the outline penetrated the area to be filled with unexpected results.
* Fixes some corner case bugs with infinite loops.
As a result of this refactor, also these new functionalities has been added.
* New support for multiframe in `Draw` mode. Any drawing in active frame is duplicated to all selected frame.
* New multiframe display mode. Keyframes before or after of the active frame are displayed using onion colors. This can be disable using Onion overlay options.
Since GPencil changes depending on libharu may be committed to master
before SVN libraries for all platforms are in place, avoid build issues.
Extension of D9928.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D10280
This patch adds support for accessing corner attributes on the point domain.
The immediate benefit of this is that now (interpolated) uv coordinates are
available on points without having to use the Point Distribute node.
This is also very useful for parts of T84297, because once we have vertex
colors, those will also be available on points, even though they are stored
per corner.
Differential Revision: https://developer.blender.org/D10305
Goals:
* Clarify the distinction between builtin and other attributes at the code level.
* Reduce number of places that need to be modified to add more builtin attributes.
* Reduce number of virtual methods that need to be implemented by e.g. `MeshComponent`.
To achieve these goals, this patch implements the concept of "attribute providers".
An attribute provider knows how to give access to attributes on a geometry component.
Each geometry component can have multiple attribute providers, whereby each provider
manages an different set of attributes.
The separation of builtin and other attributes is now done at the attribute provider level.
There are two types of attribute providers. One for builtin attributes and one for all others.
This refactor also helps with T84297.
Differential Revision: https://developer.blender.org/D10341
This patch will show textures in the image editor with the maximum
available resolution determined by the GPU Hardware/Driver.
Currently the size is limited by the user preference texture size limit.
An image user can set the `IMA_SHOW_MAX_RESOLUTION` flag to request
gpu textures in the max supported resolution. When this flag isn't
set the gpu texture is limited by the user preference setting.
When the gl resolution limit is disabled the GPU texture is always
created for the max supported resolution.
Reviewed By: Clément Foucault
Maniphest Tasks: T81206
Differential Revision: https://developer.blender.org/D9160
This avoids adding DNA_ID.h into other headers, recently changed in
cfa48c84d0
Note that other enums could be moved too, this is a smaller change
to avoid indirectly including DNA_ID.h in many places.
This commit moves the property layout callbacks for node types to their
implementation files from `drawnode.c`. This was proposed a while ago in
T75724.
**Benefits**
- Fewer files need to be changed when adding a new node.
- Makes it possible to reuse functions from the node's implementation
in the layout code.
- Except for RNA, all of the node "inputs" are in the same place.
- Code gets shorter overall, avoids the large switch statements.
**Downsides**
- Requires including two UI headers.
- Requires adding an editors dependency to the nodes folder.
This commit only changes function nodes and geometry nodes, more can be
moved later.
Differential Revision: https://developer.blender.org/D10352
The header files in freestyle utilize the using-directive at the global
file scope. This is a bad practice as it pollutes the global name space
causing possible ambiguous reference compilation errors. In particular,
the DNA files that are included by freestyle will cause those ambiguous
reference errors when the developers adds a DNA member with a type name
that also exist in the Freestyle name space, such as Curve and possibly
others.
This patch does the minimal work needed to resolve that by moving the
using-directives from the headers into the corresponding translation
units.
Reviewed By: Brecht
Differential Revision: https://developer.blender.org/D10351
The logic to ensure a valid region state was too aggressive in setting the
region hiding. It would just always update it based on the operator's
`hide_props_region` option, not only when file browser was newly opened.
It's more selective now.
Essentially, `lib_link_all` would perform some post-processing over data
in given `bmain` that **may** fail when not all data from all libraries
has been properly loaded yet.
This happens when `lib_link_all` is called from `read_libraries`, where
the bmains are split by libraries.
Now those post-processing is put into its own utils function, which
asserts that it is only called on a merged bmain.
Bonus point, this will avoid re-runing those not-so-cheap operations
more than once on the same data.
Reproducible in r1442 of Sprite repository when opening
`pro/animation_test/rex/performance/rex_crowdcamping/rex_crowdcamping.lighting.blend`
NOTE: Not so sure why we have to call `lib_link_all` several times (once
for each library, and then once on the whole merged bmain, including
local IDs then). So that it can get called for libs while we still have
that specific .blend file handle around?
In any case, the overhead here is minimal since we do ensure a data-block is
never lib-linked more than once, so this is not a serious concern right now.
Differential Revision: https://developer.blender.org/D10307
This patch will show textures in the image editor with the maximum
available resolution determined by the GPU Hardware/Driver.
Currently the size is limited by the user preference texture size limit.
An image user can set the `IMA_SHOW_MAX_RESOLUTION` flag to request
gpu textures in the max supported resolution. When this flag isn't
set the gpu texture is limited by the user preference setting.
When the gl resolution limit is disabled the GPU texture is always
created for the max supported resolution.
Reviewed By: Clément Foucault
Maniphest Tasks: T81206
Differential Revision: https://developer.blender.org/D9160
The changes are:
- Split conversion of the texture space data to its own file.
- Skip adding keyframes with AutoKeyframes.
- Skip recalculation of the trasform dependencies between objects.
- Skip `special_aftertrans_update_...`.
No real user functional changes
The code takes many turns to get a suitable "target" for the snap to grid.
Perhaps there were other reasons awaited for `transformCenter_from_type`
and `TransCenterData center_cache[5]`.
But since nothing is defined, it is better to simplify the code.
No user functional changes
Simple change that shows all the enums used in the transform code and helps
to better understand the role of the members of the struct TransInfo.
It also allows the IDE to show the name of the value represented by the
member instead of a number that needs to be consulted.
Differential Revision: https://developer.blender.org/D10312
When clamp is enabled, it should clamp between the output min and max
and not between 0 and 1.
Differential Revision: https://developer.blender.org/D10324
`seq_effect_speed_get_strip_content_length()` checked only for number
of inputs of target strip, even if it's not an effect.
Only effects are treated in different way, so check for type as well.
Broken by 93c10797dc
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10356
This is something what comes after an experiment, which makes behavior
more desirable. Basically, for Lock-to-Selection functionality always
use control point position if any of control point itself or handles
are selected.
Initial patch from Sebastian, modification from Sergey.
Differential Revision: https://developer.blender.org/D10265
These weren't used since ages. Comment out the DNA define (value shouldn't be
reused to avoid compatibility breakage) and remove icon code for the types.
We generally prefer using enums over precompiler defines. This adds an actual
type for the values, which the compiler can use to throw warnings, give better
messages, etc.
* Attempt to improve readability by using focused, coherent helper classes.
* Replace ListBase with blender::Vector, which is more efficient and has a
better API.
* Split user reporting from error checking.
* Use namespace (as we usually do for C++ code).
* Remove unused headers
While Boolean is not guaranteed to work if the operands are not
volume-enclosing (technically: PWN - piecewise constant winding number),
it needs to do something in those cases. This change makes
more cases meet user expectations in T84493, T64544, T83403,
T82642 (though very slow on that one).
The original new boolean code used "generalized winding number"
for this fallback; replaced this with code that uses raycasting.
Raycasting would have been faster, but for unfortunately also
switchd to per-triangle tests rather than per-patch tests since
it is possible (e.g., with Suzanne) to have patches that are
both inside and outside the other shape. That can make it much
slower in some cases, sadly.
The old property never worked as expected because it was impossible expose the data as props.
Now, there are two methods to handle this: weight_get and weight_set
Example use:
```import bpy
ob = bpy.context.active_object
gpd = ob.data
gps = gpd.layers[0].frames[0].strokes[0]
i = 0
print("Weights\n================================")
for pt in gps.points:
gps.points.weight_set(vertex_group_index=0, point_index=i, weight=0.5)
i +=1
i = 0
for pt in gps.points:
weight = gps.points.weight_get(vertex_group_index=0, point_index=i)
print(weight)
i +=1
```
Reviewed By: brecht
Maniphest Tasks: T84967
Differential Revision: https://developer.blender.org/D10177
b3f989
It seems generally preferred to have new files be created with C++.
The only reason I didn't do that when I initially created the files is that I
was unsure about some C-API aspect.
Also use nullptr instead of NULL.
It seems generally preferred to have new files be created with C++.
The only reason I didn't do that when I initially created the files is that I
was unsure about some C-API aspect.
Also includes some minor C++ related cleanup (nullptr instead of NULL, remove
redundant `struct` keyword).
Currently the displayed distance when using the shrink/fatten transform
operator does not respect the scene units (they would always be in
blender units).
This changes makes sure the number is displayed in the correct unit.
Reviewed By: mano-wii
Maniphest Tasks: T85378
Differential Revision: https://developer.blender.org/D10325
Introduced by my commit: rB09709a7e64ff
This bug effectively enabled the NLA when it should be disabled, when
all tracks muted or no strips exist. Specifically, the NLA Action Track
settings would be used (extrapolation, blendmode, influence).
The function `nlastrip_evaluate_transition()` has been slightly
modified to use `nlasnapshot_blend()` instead of it's own special
blending function `nlaeval_snapshot_mix_and_free()`.
No user functional changes
Reviewed By: sybren, #animation_rigging
Differential Revision: https://developer.blender.org/D10221
This implements an operator to flip the contents of an image buffer. It
supports flipping the image horizontally and vertically.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10310
In some python scripts, the coordinates of the points are manipulated, but there are no way to force the recalculation and need hack to force the refresh.
The new api allows to call to the refresh function directly.
example: `gp_stroke.points.update()`
Unfortunately one issue raising another one, this ended up being a
fairly big update, with:
*Fixes:
** Dependencies between libraries are better handled (would fail
previously in some cases when the lib was also available as package).
** Dependency of Boost over Python is now taken into account.
** Fix CMake flags to use local own built boost.
** Fix building numpy.
*Changes:
** We now use pip for all python modules (including numpy).
** Added all missing python modules (requests etc.).
*Updates:
**USD: 20.08, Due to build failing with 20.05 (missing include).
Make the SHADING_PARAMETERS operation on node tree a real no-op.
The function used as a callback was only doing a debug print.
The issue with this function was that an original ID was passed
as an argument. This is a violation of design, and if anything it
should be left up to the implementation to check whether depsgraph
is active.
There are no functional changes for users in the interface. The
only difference is that the debug print will no longer happen.
Resolves modernize-raw-string-literal Clang-Tidy warning
The way warning works is it suggests to use raw literal when
overhead of having escape characters is higher than the overhead
of having raw literal syntax (talking about code size overhead).
This means that the warning will not trigger for "foo\"bar".
Differential Revision: https://developer.blender.org/D10322
This updates fixes the following issues (critical for 2.92):
- Issue that prevented dense 'int' grids from being exported (incorrect clip value)
- Issue with particles outside out of domain bounds (position between -1 and 0) not being deleted
Using this persistent field in `select_more_less_seq__internal` was
inapropriate in this case.
Split select more/less and linked code, because it was mixed in
`select_more_less_seq__internal()`
These operators work in completely different way.
`select_linked_internal()` doesn't use seq->tmp at all.
`seq->tmp` was used to mask strips selected by operator while iterating.
Use GSet to store temporary data instead of `seq->tmp`.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10326
This node takes a volume and generates a mesh on it's "surface".
The surface is defined by a threshold value.
Currently, the node only works on volumes generated by the
Points to Volume node. This limitation will be resolved soonish.
Ref T84605.
Differential Revision: https://developer.blender.org/D10243
When the pivot axis is not set to auto, the node will try to align the rotation
to vector as best as possible, given the selected rotation axis.
Ref T85211.
Differential Revision: https://developer.blender.org/D10292
This node calculates a distance from each point to the closest position
on a target geometry, similar to the vertex weight proximity modifier.
Mapping the output distance to a different range can be done with an
attribute math node after this node.
A drop-down changes whether to calculate distances from points,
edges, or faces. In points mode, the node also calculates distances
from point cloud points.
Design task and use cases: T84842
Differential Revision: https://developer.blender.org/D10154
Regression introduced by {rBed809866b172} where overlays weren't drawn
when overlays are turned off. The background in wireframe, solid
(always) and material preview and render preview (when not using scene
world) are also part of the overlays.
Caused by rBf83aa830cd00.
Since above commit, only meshes in editmode were considered for drawing
(because
BKE_view_layer_array_from_objects_in_edit_mode_unique_data_with_uvs was
used), but the option needs to work for texture paint mode as well, so
use BKE_view_layer_array_from_objects_in_mode_unique_data instead on
pass the draw_ctx->object_mode.
note: there is no good filter_fn to check if we have UVs if mesh is not
in editmode, this shouldnt cause much of a performance hit though.
Maniphest Tasks: T85396
Differential Revision: https://developer.blender.org/D10319
When transforming multiple strips to limits of sequencer timeline they get
squashed into one channel.
Store selection minimum and maximum channel in TransSeq and limit
transformation so no strip can be transformed beyond timeline boundary.
Reviewed By: Sergey, mano-wii
Differential Revision: https://developer.blender.org/D10013
Replace `long long` with an explicit `int64_t`. This is also what is
used in the FFmpeg headers.
Fixes clang diagnostics warning about wrong format used in the log.
Should be no functional changes.
Move `eUndoStepDir` to `BKE_undo_system.h` and use its values
everywhere.
Note that this also introduce the `STEP_INVALID` value in that enum.
Finally, kept the matching struct members in some lower-level readfile
code as an `int` to avoid having to include `BKE_undo_system.h` in a lot
of unrelated files.
When we have a local override, its linked reference may not be detected
as needing to be overridden anymore.
In that case, if there is no actual override defined by the user, assume
that we can get rid of this local override as part of the resync
process, and use the linked data directly instead.
Make it possible to attach a preview image to an Action.
In the #asset_browser_pose_libraries project, poses will be stored as
individual Action datablocks. Having a thumbnail for each pose is of
course essential.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D10306
This node outputs true when geometry nodes is currently evaluated
for the viewport and false for final renders.
Ref T85277.
Differential Revision: https://developer.blender.org/D10302
No need to show certain operators when they have no functionality.
For example, when adding a library override from the outliner menu, there should only be an option to add one (i.e. reset, delete, resync operators not relevant for objects without library override).
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D10301
The rotation direction was flipped recently.
This meant that rotation on a single axis gave negative results compared
with previous Blender releases.
This partially reverts a9b53daf23.
Differential Revision: https://developer.blender.org/D10299
Adds an exception so that the key-binding `control + Tab` does not get
duplicated as `command + Tab` on macOS because this is a global system
shortcut for the app switcher.
The key-binding `command + Tab` was shown for the operators “Toggle
Graph Editor“ and “Toggle Dope Sheet” in Dope Sheet and Graph Editor,
but only `control + Tab` actually worked.
Differential Revision: https://developer.blender.org/D10304
Win32 child windows on top of parents. Short-term solution of forcing is_dialog when owned.
Differential Revision: https://developer.blender.org/D9971
Reviewed by Brecht Van Lommel
Simplification of Win32 GHOST_WindowWin32 with improved support for owned windows.
Differential Revision: https://developer.blender.org/D9971
Reviewed by Brecht Van Lommel
When adding a new preset the name would be converted to lower case and
then displayed in the interface in title case. This was confusing
because the name didn't reflect what was typed, and there are many cases
when the name shouldn't be forced into title case (like 8K UHDTV for
example).
This commit leaves the custom preset names in the original casing, and
removes the conversion of filenames to title case for preset lists.
Differential Revision: https://developer.blender.org/D10224
Before committing D10224, bundled preset names that are lowercase need
updating to title case for display in the UI. This changes several of
the preset file names to title case, and fixes a couple of other naming
issues in the preset names. A few strings in the code are also changed
to reflect the new filename of the Blender keymap.
The driver variable `splines[0]` (on a curve)
behaved as if the path was `splines`.
Resolve pointers was well as properties as it's supported by the caller.
Error in original commit that added property support
82b0a9e369.
Refactor
//nlastrip_evaluate_actionclip()// and //nlaeval_blend_value()// into
//nlasnapshot_blend()//, //nlastrip_evaluate_actionclip()//,
//nlasnapshot_from_action()//.
**Motivations**:
* {T83615} Requires reading all pose bone fcurves before being able to
apply pre-blend transforms. The function //nlasnapshot_from_action()//
achieves this. This effectively removed the need to specially handle
Quaternion blend queuing so that code has been removed.
* {D8296} Adds support for keyframe remapping through an upper stack of
strips. Instead of introducing a variant of the form:
//nlastrip_evaluate_actionclip_inverted_get_lower()//,
//nlastrip_evaluate_actionclip()// will later be extended to take an
`evaluation_mode` as input to avoid duplicating the recursion functions
related to //nlastrip_evaluate()//.
* //nlasnapshot_blend()// will eventually have variants of
//nlasnapshot_blend_get_inverted_lower_snapshot()// and
//nlasnapshot_blend_get_inverted_upper_snapshot()// which are all
independent of NlaStrips and NlaTracks, further simplifying the
blending implementation. Ideally, //nlastrip_evaluate()// would get
renamed to //nlasnapshot_blend_strip()// but that'll be a later patch
to avoid unnecessary patches slowing the review of more important
patches.
No User-side Functional changes
Reviewed By: sybren, #animation_rigging
Differential Revision: https://developer.blender.org/D10220
**Problem**:
Translating a strip will truncate it when next to a transition.
**Solution**:
The code only accounted for the prev/next strip for whether it exceeds.
When it was a transition, the exceed logic fails. Now, we use the
nearest non-transition strip instead.
Reviewed By: sybren, #animation_rigging
Differential Revision: https://developer.blender.org/D10083
Dyntopo does not have Face Sets implemented yet, so the entire mesh is
considered a single Face Set. In that case, the check unique face set
function should always return true.
Reviewed By: JacquesLucke
Maniphest Tasks: T85230
Differential Revision: https://developer.blender.org/D10259
This ensured that the sculpt mode deformation is flushed to the mesh
datablock after leaving sculpt mode, so it can be duplicated and
extracted correctly.
Reviewed By: JacquesLucke
Maniphest Tasks: T85136
Differential Revision: https://developer.blender.org/D10254
A missing flush of the deformed PBVH coordinates to the shape key.
Reviewed By: JacquesLucke
Maniphest Tasks: T84370
Differential Revision: https://developer.blender.org/D10174
The edge preview data of the boundary needs to be freed with the
boundary data created for the brush. Also, all data for the
ScultpSession preview that is used to render the cursor needs to be
freed with the ##SculptSession##.
Found by Jacques Lucke
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10173
The white rotation Gizmo should always use the View orientation.
Before, if you set an orientation for the gizmo other than the default,
that gizmo would behave like the contraint Z Gizmo.
This is an old bug (strange not to have been reported before).
To define the direction of rotation, the View Vector is used.
However, only the projection matrix was being considered, but in
perspective mode, the position of the pivot also matters.
Good news is, this version support LLVM 11.
But it was a serious pain to get working, even ended having to add an
ugly hack to manually specify the OIIO include dir...
Ref: T83631.
Normally sockets only have one input link. This commit adds the back-end
changes needed to use multiple input links per socket.
Multi-input sockets can be defined with a new flag in `bNodeSocketType`.
The changes necessary to make the sockets work in the geometry nodes
evaluator are generalizing input socket values as a vector of values,
and supporting this in the derived node tree structure.
This patch should contain no functional changes. Two upcoming patches
will use this system for the "Join Geometry" node and expose link picking
and updated display in the UI: D10069 and D10181.
Reviewed By: Jacques Lucke, Hans Goudey
Differential Revision: https://developer.blender.org/D10067
Implements a node to get collection objects.
These objects are then passed along as instances in the node tree.
Follow up tasks:
Multiple nodes does not support instancing yet: T85159
Changing collection offset does not trigger a refresh: T85274
Reviewed By: Jacques, Dalai, Hans
Differential Revision: http://developer.blender.org/D10151
Adds Document Type Identifier configuration to use a system generated
document icon for Blender files on macOS. The system composites the
app’s icon and the extension name onto the document sheet icon
(new style on macOS 11 Big Sur and old style on macOS 10.15 Catalina
and earlier). This is in line with Apple’s Human Interface Guidelines.
Removes the previously used file icon because it is no longer needed.
Differential Revision: https://developer.blender.org/D10267
The 'ui_pan_to_scroll' uses 'WM_event_absolute_delta_y'. For scrolling the List View
we need to invert the direction to respect "natural scroll direction" system preferences.
Differential Revision: https://developer.blender.org/D10291
In everything in `EEVEE_renderpasses_postprocess` (or the corresponding
renderpass_postprocess_frag.glsl) colors get divided by a
'currentSample'.
This 'currentSample' is always incremented in
`EEVEE_temporal_sampling_draw` (and also one more time before we reach
`EEVEE_renderpasses_postprocess`.
This results in a "off-by-one", slightly inacurate colors and slight
inaccurate transparency (in certain passes like AOVs).
Now decrement the currentSample `EEVEE_renderpasses_postprocess` again
by one to compensate.
Maniphest Tasks: T85261
Differential Revision: https://developer.blender.org/D10286
Related to {D10286}. When volumetrics are used in the scene the coverage
is incorrect. The reason is that the current sample is 1 over the num
samples that are calculated.
Related to {D10286}. When volumetrics are used in the scene the coverage
is incorrect. The reason is that the current sample is 1 over the num
samples that are calculated.
`BKE_mesh_new_nomain_from_template_ex()` would duplicate the mesh selection
storage of the destination mesh to the destination mesh. Since that mesh was
default initialized at this point, the selection was `NULL`, so the duplication
call is essentially a no-op.
Mistake in 7efc75c709.
Differential Revision: https://developer.blender.org/D10009
Reviewed by: Sybren Stüvel
Now we only use 'undo' or 'redo' in function names when the direction is
clear (and we assert about it). Otherwise, use 'load' instead.
When passing an undo step to BKE functions, consider calling code has
done its work and is actually passing the target step (i.e. the final
step intended to be loaded), instead of assuming we have to load the
step before/after it.
Also deduplicate and simplify a lot of core undo code in BKE, now
`BKE_undosys_step_load_data_ex` is the only place where all the complex
logic of undo/redo loop (to handle several steps in a row) is placed. We also
only use a single loop there, instead of the two existing ones in
previous code.
Note that here we consider that when we are loading the current active
step, we are undoing. This makes sense in that doing so //may// undo
some changes (ideally it should never do so), but should never, ever
redo anything.
`BKE_undosys_step_load_from_index` also gets heavily simplified, it's
not basically a shallow wrapper around
`BKE_undosys_step_load_from_index`.
And some general update of variable names, commenting, etc.
Part of T83806.
Differential Revision: https://developer.blender.org/D10227
This was caused by an incorrect bound check. Since we now use different
data type for indexed and non-indexed drawcalls, we need to check if the
next drawcall is going to overflow the buffer.
Most fields have Affect Location and Rotation options that switch
off their effect, but they are only checked as the last step after
the force is already computed. It is more efficient to check it
when building the list of field objects, just like zero weight.
It is also possible to check the strength-related fields for 0.
As an aside, this adds Location to Texture fields (they don't
handle rotation) and both Location & Rotation checkboxes to
Fluid Flow. Boid and Curve Guide remain without options for
now as they are completely different from others.
Differential Revision: https://developer.blender.org/D10087
This patch fixes a bug introduced in
rB74188e65028d268af887ab2140e4253087410c1e.
The commit incorrectly moved the declaration and intialization of the
variable `pwr` inside the loop. Since the value was originally modified
in each iteration based on it's previous value and `pwHL` through
`pwr *= pwHL`, this change in scope was wrong. It resetted the value in
each iteration. This patch moves the declaration of `pwr` outside the
loop again.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10258
Allow OS input language to initiate IME, regardless of Blender output language.
Differential Revision: https://developer.blender.org/D10268
Reviewed by Julian Eisel
Includes improvements for the file IO. Namely, more meta data will be written from now on.
This change is required to prevent IO issues (e.g. T84649) that arised through the use of sparse grids caching (introduced in 2.92).
Required changes to compile `node.cc` with clang tidy:
* Use c++ includes like (e.g. climits instead limits.h).
* Insert type casts when casting from `void *`.
* Replace `NULL` with `nullptr`.
* Replace typedef statements.
This change is in order to use the `blender::Map` data structure
for node error messages.
Due to an off-by-one error the generated studio light icons did not show
the influence of the 4th light. This fix changes the loop to iterate
over all of the lights when computing the lighting.
Differential Revision: https://developer.blender.org/D10283
Because the the vertex group name-to-index map is stored in the object
rather than object data, the object info node has to replace the
map when it replaces the mesh component on the geometry set with mesh
data from another object.
This normally works fine as a way to use the vertex groups from the
input mesh, but when passing this mesh to the next modifier, the entire
mesh component was replaced, removing the vertex group name map.
This commit adds a function to replace only the mesh data in mesh
component, uses it in the modifier code, and updates the relevant
comments.
Note that the fact that vertex group names are stored in object data
is a legacy design decision that should be reevaluated at some point.
Differential Revision: https://developer.blender.org/D10256
This resulted in hair drawing with an offset if an instance_offset was
set.
note: Usually the instance_offset gets combined with the objects obmat
in 'make_duplis_collection' / 'make_dupli', see
> /* Combine collection offset and `obmat`. */
Using the resulting DupliObject->mat instead does include the
instance_offset, but this results in double-transforms (something that I
have not investigated further), so now reconstruct the correct matrix
from scratch.
Maniphest Tasks: T85301
Differential Revision: https://developer.blender.org/D10285
Eevee is now used for Freestyle rendering by default, since other engines are
unlikely to have support for this. Workbench and Cycles do their own rendering.
RenderEngine add-ons can do their own Freestyle rendering by setting
bl_use_custom_freestyle = True.
Differential Revision: https://developer.blender.org/D8335
When a searchbox-button for string properties (e.g. to reference a vertex
group) was created, and a value was set, the tooltip timer would constantly get
cancelled.
That was because the code to validate the current value
(`ui_but_search_refresh()` - early exists for non-string properties) would call
a helper function to update the search results (`ui_searchbox_update_fn()`),
which always reset tooltips. Resetting them in the helper makes sense, for as
long as the searchbox is open. But while it's not, and we just validate the
current value, it shouldn't do this.
This was also noticable in the output settings of dynamic paint, and probably a
number of other cases (especially with script UIs which tend to use string
properties more often).
Likely caused by de53c039ad.
Standard wiki build instructions for building Blender on macOS can now be used
on Macs with ARM processors.
This contains all libraries except for Embree and OpenImageDenoise, so Cycles
performance does not yet have full performance and features in this build. An
x86-64 build is likely to still render faster than arm64 until Embree is added.
Uses the new lib/darwin_arm64 folder. For simplicity and to keep download size
under control, both for end users and builders, we are not planning to ship
universal binaries. So this is a separate folder from lib/darwin.
Ref T78710
Differential Revision: https://developer.blender.org/D10276
This lead to wrong, stretched UVs regardless of the ON/OFF state of
"Correct Aspect" option (some code in the operator respected this
setting properly, whereas it was hardcoded in another part).
Before rB9296ba867462, `uvedit_pack_islands_multi` was always called
with `correct_aspect` = false for the UnwrapOptions.
After rB9296ba867462, `ED_uvedit_pack_islands_multi` was always called
with `correct_aspect` = true for the UVPackIsland_Params.
Both seem wrong [in that they do not take the operator setting into
account]. Now respect that setting [same as the following
`uv_map_clip_correct_multi` does as well btw.]
Now results match 2.90 [where this was still python] perfectly.
Maniphest Tasks: T85194
Differential Revision: https://developer.blender.org/D10246
Build sqlite without `tcl` support, as it's causes an error on
installation when `tcl` is installed into the systems `/usr/lib/` and
install isn't running as root.
This could be resolves by adding `tcl` as a dependency
however it's not needed for Python's sqlite integration.
Linux distributions (Debian & Arch at least) split this off
into a separate package (which Python doesn't depend on),
so there is no need for Blender to include sqlite's `tcl`
integration either.
Reviewed By: brecht, LazyDodo
Ref D10281
This was caused by the paint overlay drawing after the infront pass.
Moving the paint overlay before it fixes the issue. We might even do
that for more mode overlays.
Drawing on e.g. the X-Z plane was broken due to an earlier
commit (rBef28da262342). This was causing the projection when drawing
on an axis plane to fail.
The fix checks that the user is in view plane projection mode.
Reviewed By: antoniov
Maniphest Tasks: T85203
Differential Revision: https://developer.blender.org/D10252
Some orientations are not possible to be calculated for certain scenes.
In these cases, others are chosen and informed by the operator.
However, the user may prefer that the chosen one be displayed (even if it
is not actually used).
This corresponds to older versions of Blender.
This could happen with files saved before ef4aa42ea4, so before global areas
were written to .blend files.
We would just always add the top- and status-bar, even though the screen wasn't
supposed to have them. I'm not entirely sure what caused the further issues
observed there, most code should probably handle the case fine still. But
apparently something didn't.
Steps to reproduce were:
* Open Blender from before ef4aa42ea4 (e.g 2.91 release)
* In 3D View, View > Area > Toggle Fullscreen Area
* Save the file
* Open the saved file (can be in newer version too)
The fullscreen is corrupt now, especially noticable after duplicating the
workspace.
This bug happens when media size doesn't match scene size and proxies
are enabled. This is because some strips are rendered in preview size
already - effects, mask or strips using proxies.
If strip input is prescaled it needs to be known when transforming
images, which does also scaling to preview size as one operation.
whether image needs prescaling is defined in function
`seq_need_scale_to_render_size()`
Problem was introduced in 5713626422. Previously all images were
scaled to fit into preview, and this was considered as baseline for
further image transformation.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10183
Due a thread priority, the calculation of the current frame is not done before the frames are available. This produces wrong render frames.
The solution is verify the current frame before doing the real render. This adds only a few milliseconds, but it assures the frame is correct.
As the problem is only when render in background, the recalculation of the frame is only necessary when do real render and not a viewport render, so there is no impact in the animation FPS.
This solution replaces {rBf9e994d0f463}.
That commit created an inverted orientation matrix but the 'Align to
Transform Orientation' operator doesn't work well with inverted matrices.
This new solution makes the rotate operator use the negative vector of the
axis.
This reverts commit f9e994d0f4.
And fixes T85227.
That commit created an inverted orientation matrix but the 'Align to
Transform Orientation' operator doesn't work well with inverted matrices.
The previous fix to the width modes Percent and Absolute did
not take into account that with limit mode Weight, the amount
needs to be scaled by the bevel weight of the beveled edge in
question. (Sometimes there are two beveled edges in question,
in which case an average is used.)
The previous fix to the width modes Percent and Absolute did
not take into account that with limit mode Weight, the amount
needs to be scaled by the bevel weight of the beveled edge in
question. (Sometimes there are two beveled edges in question,
in which case an average is used.)
This was caused by a use after free. The issue was that the motion steps
were successfully gathered but failling the last vertex count check,
discarding the copied VBOs but not removing the reference of the first
VBO which was passing the test.
This solution replaces {rBf9e994d0f463}.
That commit created an inverted orientation matrix but the 'Align to
Transform Orientation' operator doesn't work well with inverted matrices.
This new solution makes the rotate operator use the negative vector of the
axis.
This reverts commit f9e994d0f4.
And fixes T85227.
That commit created an inverted orientation matrix but the 'Align to
Transform Orientation' operator doesn't work well with inverted matrices.
In the operation of adding reroute node to the intersection with the
gesture segment, each rerount was added to the middle of two points that
are part of the segment.
Now add the reroute point to the intersection position.
Maniphest Tasks: T85149
Differential Revision: https://developer.blender.org/D10247
When the displacement space is set to SHD_SPACE_WORLD, the GLSL method
"node_displacement_world" is used instead of the "node_displacement_object" method. The two GLSL methods:
```
void node_displacement_object(
float height, float midlevel, float scale, vec3 N, mat4 obmat, out vec3 result)
{
N = (vec4(N, 0.0) * obmat).xyz;
result = (height - midlevel) * scale * normalize(N);
result = (obmat * vec4(result, 0.0)).xyz;
}
void node_displacement_world(float height, float midlevel, float scale, vec3 N, out vec3 result)
{
result = (height - midlevel) * scale * normalize(N);
}
```
In contrast to the "node_displacement_object" method, the "node_displacement_world"
does not require an "obmat" parameter. Attempting to still pass "GPU_builtin(GPU_OBJECT_MATRIX)"
as additional parameter will result in a memory leak. The "GPUNodeLink" allocated in
the "GPU_builtin" method will never get released.
Fixes T83941 Memory leak when using the Displacement shader node in Eevee with the displacement
space set to "World Space"
This change removes copy-on-write operations from ID nodes which do not
need copy-on-write.
Should be no functional changes, as before the copy-on-write operation
would do nothing for those nodes anyway.
Building IDs which are not covered by copy-on-write process was not
implemented, which was causing parameters block not present, and, hence
causing crashes in areas which expected parameters to present.
First part of this change is related on making it so Copy-on-Write is
optional for ID nodes in the dependency graph.
Second part is related on using a generic builder for all ID types
which were not covered by Copy-on-Write before.
The final part is related on making it so build_id() is properly
handling ParticleSettings and Grease Pencil Data. Before they were not
covered there at all, and they need special handling because they do
have own build functions.
Not sure it worth trying to split those parts, as they are related to
each other and are not really possible to be tested standalone. Open
for a second opinion though.
Possible nut-tightening is to re-organize build_id() function so
that every branch does return and have an assert at the end, so that
missing ID type in the switch statement is easier to spot even when
using compilers which do not report missing switch cases.
As for question "why not use default" the answer is: to make it more
explicit and clear what is a decision when adding new ID types. We do
not want to quietly fall-back to a non-copy-on-write case for a newly
added ID types.
Differential Revision: https://developer.blender.org/D10075
Previously this relied on the dependency graph to detect changes in the screen
datablock, which would then notify the renderers. This was rather indirect an
not even really by design. Instead use notifiers to tag specific 3D viewports
to be updated.
Includes changes to BKE_scene_get_depsgraph to accept a const Scene pointer.
Testing if this works correctly requires adding back commits 81d444c and 088904d,
since those have been temporarily reverted.
Differential Revision: https://developer.blender.org/D10235
The grease pencil merge depth shader is designed to only work correctly
in octographic mode. The uv coordinates used `noperspective` attribute.
Somehow this doesn't lead to render artifacts on most platforms and was
only detected on OSX + AMD cards.
This fix would calculate the uv coordinate inside the fragment shader
and isn't passed along from the vertex shader.
Thanks to Sebastián Barschkis for providing the hardware and time and
Clément Foucault for helping out with the final fix.
Removes two unused --debug-gpu command line flags (unused as in, does nothing):
* `--debug-gpumem`: Unused since c08d847488, the info is now available in
the status-bar if enabled in the Preferences. Initially added in
fec317de8d.
* `--debug-gpu-shaders`: Unused since 216d78687d, double checked with
Clément, he says it's not that useful nowadays. Initially added in
fec317de8d.
Addresses T83954 and T83953.
Differential Revision: https://developer.blender.org/D10244
Reviewed by: Clément Foucault
Commit 6e74a8b69f changed the denoiser input passes default to
include the normal pass. This does not always produce optimal images though, hence why the
default was previously set to only include the color and albedo passes. This restores that behavior, so
that viewport denoising with OptiX produces the same results as before.
This commit fixes T84588's second issue. The `particle` parameter was
declared optional in the Python API of `bpy.types.ParticleSystem.uv_on_emitter`
due to a typo in the RNA definition. This commit marks it as required.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10127
Introduced with swapped axis in rB0d67eb277f9b.
Similar was fixed for the translate gizmo in rB567212c3434a.
Now do the same for scaling as well.
Maniphest Tasks: T85169
Differential Revision: https://developer.blender.org/D10245
When this behavior was added it made sense,
since then show_edges has changed to make edge-display more subtle
(see 1a4b60c30d) instead of removing
edge-selection display entirely.
For jpeg, an image.resolution was always based on the default 72dpi, now
read the pixel density from the jpeg_decompress_struct, convert
according to unit and store in IMBuf's ppm.
Not 100% sure of all implications tbh., files I have checked seem to work
as expected now in the context of the report.
Maniphest Tasks: T84661
Differential Revision: https://developer.blender.org/D10166
If a force field was of type "Texture", any changes of that texture (e.g.
its type - as reported in T85139 - or also its properties) were not
properly updating rigid bodies and particle systems.
Now ensure that texture is actually in the depsgraph and set up relation
accordingly.
Also fixes T75198.
Maniphest Tasks: T85139
Differential Revision: https://developer.blender.org/D10234
Don't overwrite environment variables that may
contain options like suppression files, symboliser etc.
It's similar to rBa181b156399a13fa429159112e30c8005d5e8a59
and rBA589d13408a60cbec34a8bc3cc798c586043743ae .
For Blender Add-ons repo, see the equivalent in D9816.
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D9815
- Grey out in wire/xray display.
- Expand the description for when this is used.
While this is working, the intended behavior wasn't clear,
address T85177.
The outline for the active modifier was abusing the property search
match theme color, as noted in a comment. This commit adds a new
theme color in RNA specifically for the active modifier outline.
This enum is only used by the node. So it does not need to be declared outside
the scope of its function.
Originally I thought this may be relevant to the collection info node as well,
but the patch for it is defining its own enums.
The issue was that the `offset` in `dst_span[offset]` was out of bounds
when the domain size is 0. The fix is to simply skip copying attributes
in that case.
This reverts commit 76fd41e9db. This should have
been reverted along with 0f95f51361, since this
change by itself is causing crashes when the depsgraph accesses a non-existent
copy-on-write component.
Ref T84717
For buttons that edit array properties, the soft min/max and slider ranges are
based on the range of all values in the array. However for alpha this does not
make much sense, the only reasonable range is 0..1 even when there are RGB
values larger than 1. So treat alpha as an individual property.
There are two issues here. First, like in T81988 there are cases
where the modifier would deform some vertices immediately after
bind. This is caused by wrong assumptions in the code about the
possible relative angles between various vectors, which can cause
negative weights that don't blend correctly to appear.
Specifically, it seems originally the code assumes that the
centroid-point vector in the polygon plane lies somewhere
between the mid-edge vectors. This is however not necessarily
the case for distant vertices, because the polygon is not
guaranteed to be truly planar, so normal projection may be
a bit off. The code has to use signed angles and checks to
support all possible angular arrangements.
The second issue is very thin and long triangles, which tend
to be very spatially unstable in their thin dimension, resulting
in excess deformation. The code was weighting distance using
the distances between the centroid and the mid-edge points, which
in this case end up as nearly opposite vectors of sizable length
and don't correctly represent how thin the triangle actually is.
It is thus better to use centroid-to-line distances, and an
additional even stricter value for the midpoint that will use
only 3 vertices at evaluation time.
Differential Revision: https://developer.blender.org/D10065
Now the icon's rect are drawn wider than it should be, and with
overlapping, probably in order to compensate for the icon's offsets
inside the rect. The solution is to draw icon's rect of the correct
size and center the icon itself.
And make the hotspot exactly match the icon's rect. The last/right
button's hotspot also covers the extra padding on the right.
Differential Revision: https://developer.blender.org/D9936
Reviewed by: Julian Eisel
Now the icon's rect are drawn wider than it should be, and with
overlapping, probably in order to compensate for the icon's offsets
inside the rect. The solution is to draw icon's rect of the correct
size and center the icon itself.
And make the hotspot exactly match the icon's rect. The last/right
button's hotspot also covers the extra padding on the right.
Differential Revision: https://developer.blender.org/D9936
Reviewed by: Julian Eisel
Preview icons (e.g. material preview or other data-block previews) use the same
background-job code as deferred loading of custom icons/previews. There was a
check to skip preview generation if the render engine does not support preview
rendering mode, which workbench doesn't. However this check should only be used
when actually rendering a preview, not when doing deferred loading.
"Lock Strips" (Shift-L), conflicted with "Select Pick Linked".
Use Ctrl-H, Ctrl-Alt-H for lock & unlock since selected linked
uses bindings which are used in other parts of Blender.
Since 216d78687d the depth function
(glDepthFunc) was left in an undefined state for drawing callbacks that
use the `bgl` module.
This meant enabling depth-test from Python's bgl module also needed
to set the depth function (which previously wasn't necessary).
Set the depth function as part of GPU_bgl_start
Rather self-explanatory. Never worked since the initial implementation.
It is possible to preserve lock-to-selection option with no selection
nowadays (since the fix for T84850). So now the Lock-to-Selection option
is fully under user control. Surely, the panning and zooming is also
properly supported now in the described scenario.
Differential Revision: https://developer.blender.org/D10226
The unused result was reported by Clang-Tidy 11.
It does make sense to check for the failed mmap() calls rather than
quietly suppress errors.
In this change failures are reported, but application execution is
not aborted. This is a bit disputable, but it feels to be a safer
thing to do now.
It is unclear how to test the code though, as we don't have any
tools in-place to simulate read errors.
Differential Revision: https://developer.blender.org/D10223
Gaussian filter with a too large kernel doesn't make much sense.
This commit caps the Gaussian function radius to MAX_GAUSSTAB_RADIUS.
Reviewed By: sergey
Maniphest Tasks: T84512
Differential Revision: https://developer.blender.org/D10122
Due a thread priority, the calculation of the current frame is not done before the frames are available. This produces wrong render frames.
The solution is verify the current frame before doing the real render. This adds only a few milliseconds, but it assures the frame is correct.
As the problem is only when render in background, the recalculation of the frame is only necessary when do real render and not a viewport render, so there is no impact in the animation FPS.
Technically, the crash was caused by revert which happened in
rBcd24712c2c5: it reverted some code which is essential for
rB76fd41e9db1.
Bring back the essential code for the removal of un-needed
Copy-on-Write operations, so that the crash doesn't happen.
What was causing the crash is the ID tag assuming Copy-on-Write
operation always exists.
Activating buttons was running too early, before the popup was
positioned on the screen,
causing data-selectors to be positioned incorrectly.
As the early button activation isn't needed, remove this call.
Ensure this doesn't happen again with an assert.
Disable key-accelerators for key-repeat events.
When a key was held it could open the menu and activate the menu
item associated with that key.
With the RMB select option: edit-meshes & edge-selection caused
holding W to open & activate "Edge Bevel Weight".
System encoding issues have been a paint-point for us with Python 3,
since Blender always uses UTF-8 which might not be the case for the OS.
While the Py_SetStandardStreamEncoding was already set to utf-8,
the file-system could still have an incompatible encoding.
See PEP-540 for details.
In two cases the percentage property was actually used incorrectly, as
pointed out in T82070. The range was [0, 1], but the properties were still
displayed as percentages.
There is a preference to control whether to display factors or
percentages, so it usually doesn't make sense to manually define
properties as percentages.
Resolves T82070
Differential Revision: https://developer.blender.org/D9344
When using the viewport render animation and saving to an 8 bit
image/movie file, the color management is applied twice. Once on the GPU
and once when saving to disk. Removing this option currently leads to
incorrect Scene strip rendering so needs more research.
When uv editing objects that share the same mesh only the selection
state can get confused. The cause is that the UV editor uses a
particular order of objects and store its state in the first object of a
mesh it hasn't handled. During drawing this state is updated into the
GPU buffers. In the case of linked meshes it can happen that the GPU
buffers are updated based on the object that does not have the correct
selection state making th selection VBOs incorrect.
This patch adds a work around that uses the order that the UV editor is
also using so the GPU buffers are built with the right data.
The "cuda_mem_map_mutex" was potentially being locked recursively during the call to
"CUDADevice::move_textures_to_host", which crashed. This moves around the locking and
unlocking of "cuda_mem_map_mutex", so that it doesn't call a function that locks it while
still holding the lock.
Reviewed By: pmoursnv
Maniphest Tasks: T85089, T84734
Differential Revision: https://developer.blender.org/D10219
Revert "Fix T83411: Crash when using a workspace/layout data path in a driver"
The fix for the crash exposed design violation in the viewport shading updates,
which is for some reason relying on dependency graph tag of interface data.
The viewport module did not respond to the issue in 2 weeks, and the architect
considered missing update for multiple users a more serious issue than a crash
in a very specific case.
This reverts commit 0f95f51361.
BLI_strncpy_wchar_from_utf8 made the assumption that
wchar_t is UTF-32 bit regardless of environment, while
this holds true on both mac and linux, on windows
wchar_t is actually actually UTF-16.
This resulted in the upper 16 bits being dropped from
from some string conversions and prevented blender
from starting when installed in a path with unicode
code-points over 0xffff.
There was also a fair bit of code duplication between
BLI_strncpy_wchar_from_utf8 and BLI_str_utf8_as_unicode_and_size
this change essentially removes all logic from
BLI_strncpy_wchar_from_utf8 and calls the right function
for the right environment.
Reviewed By: brecht , Robert Guetzkow
Differential Revision: https://developer.blender.org/D9822
Long data-block names are clipped to fit into data-block selector menus. For
linked data-blocks, there's also a hint indicating the source library, which
takes further space and may get clipped too.
So this commit adds a tooltip to the menu items, which displays the full,
unclipped data-block name and the unclipped library name. Plus, the library
path is shown too, which is also useful info.
Adds helper functions for search menu item tooltips, so these are easier to add
to other search menus in future.
Part of T84188.
This adds the ability to use all the math operations in the regular
utility "Math" node. The code is quite similar to the attribute vector
math node, with the simplification that the result is always a float.
Differential Revision: https://developer.blender.org/D10199
Allow use of ellipsis to indicate truncated text down to a single character.
Differential Revision: https://developer.blender.org/D9483
Reviewed by Hans Goudey
An extra `p->` was added for some reason in a recent commit.
Additionally, there's no reason for the flag to be kept as a pointer,
so just dereference it at the start of both functions.
Apparently things have changed since {rB98d205508977a6f72bf55},
and putting the buttons in two separate rows is no longer enough
to keep the right-most popover button in the timeline header from
aligning with the menu buttons. This just adds a separator large
enough to avoid the alignment.
When the drawing plane was set to view and the user would pan their
camera sideways, the drawing would be more and more distorted and
projected further back.
The fix projects the strokes to view when the user is looking through
the camera or has the drawing plane set to view.
Reviewed By: antoniov
Maniphest Tasks: T85082
Differential Revision: https://developer.blender.org/D10213
When the drawing plane was set to view and the user would pan their
camera sideways, the drawing would be more and more distorted and
projected further back.
The fix projects the strokes to view when the user is looking through
the camera or has the drawing plane set to view.
Reviewed By: antoniov
Maniphest Tasks: T85082
Differential Revision: https://developer.blender.org/D10213
Use transform matrices instead of loc, rot, scale variables to store instance transforms.
Reviewed By: JacquesLucke
Differential Revision: http://developer.blender.org/D10211
`seq->tmp` was left in invalid state after
`SEQ_sequence_base_dupli_recursive()` which is run by
`scene_copy_data()`
Ensure all strips have `seq->tmp` set to `NULL` before splitting strips.
Meta strip cache is not invalidated if strip inside of meta strip is
invalidated.
Find all metastrips that contain invalidated strip and invalidate them
recursively.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10192
Workbench engine used active camera to setup DOF effect even when
camera was overridden.
Store camera override in `WORKBENCH_PrivateData` and use it in
`workbench_dof_engine_init()`
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D9952
This improves the fix introduced in rBdc8b31af578bfcf9f77dbce6d7b7da1006a3c8c1.
While it did not result in other bugs afaik, I thought it would be
good to make the fix more specific, in case some other code did
expect `layer->data` to be null. This updated fix checks for the
very specific case the fix was intended for.
This implements a new geometry node based on T84606.
It is the first node that generates a `VolumeComponent`.
Differential Revision: https://developer.blender.org/D10169
This just implements a todo with a utility function that didn't exist
at the time. For example, if one geometry has a "scale" attribute with
a float type and another has a "scale" attribute with a vector type,
the vector type will be used for the resulting geometry.
Differential Revision: https://developer.blender.org/D10206
Adding new tracks, mask points, mask primitives, changing selection was
causing an unwanted jumps in the view.
This change makes it so those operations are preserving view offset.
Differential Revision: https://developer.blender.org/D10146
The default one is now UVs are smoothed, boundaries are kept sharp.
After some time of experimentation seems this is better default from
interoperability point of view.
This fixes distortion reported in T83470.
Differential Revision: https://developer.blender.org/D10111
Check for selection status beforec learing the "active" flag from an
FCurve. This allows the "Select All Curves" operator to retain what is
seen as the active curve.
The changes to the socket API were not applied to the standalone app.
Also modify Camera.compute_auto_viewplane() to use Camera.full_width and Camera.full_height as it is not possible to publicly access Camera.width and Camera.height anymore, so the aspect ratio could be computed with stale data.
Differential Revision: https://developer.blender.org/D9961
Also set default CYCLES_INSTALL_PATH to CMAKE_INSTALL_PREFIX.
By default with a `make cycles` this will build to ${CMAKE_BINARY_DIR}/bin
Differential Revision: https://developer.blender.org/D9961
Change `"active_id"` to `"id"` so that tab completion in the asset browser
context returns the correct properties.
055ef5df61 renamed the `active_id` property
to `id`, but `dir(thecontext)` still returned `"active_id"`.
During viewport rendering the color values were clamped in order to
apply the overlay on top of it. This clamping would show the scene
colors washed out.
This patch adds a work around to skip the clamping when the overlays are
turned off.
Parial fix for {T77909}
The versioning code introduced in rB38df935c0985 skips the composite node
tree that is used by the scene thus not correctly versioning Set Alpha
nodes outside of node groups. This fix iterates through all node trees to
version all Set Alpha nodes.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10110
Hans noticed that these dirty flags are only used for normals currently
and that the edge flag is not used at all. This patch still applies the
"entire" fix with all four flags.
Differential Revision: https://developer.blender.org/D10193
The issue was that boolean custom data layers were not written to files,
because the dna struct name `bool` does not exist. Adding a struct that
just contains a `bool/uint8_t` does not seem to be possible, it looks like
the minimum dna struct size is 4 bytes.
The proposed solution has two parts:
1. Write the custom data layer using `BLO_write_raw` instead of
`BLO_write_struct_array_by_name`.
2. When loading a file, reinitialize any custom data layer that was
not saved correctly (this is just a fix for existing files).
Differential Revision: https://developer.blender.org/D10194
This function was doing too many things, with behaviors fairly different
depending on its input parameters. This was making the code fragile and
hard to follow.
Split it in three:
* `ed_undo_step_pre` does the common actions before we actually undo
data.
* `ed_undo_step_post` does the common actions after we have undone/redone
data.
Then, `ed_undo_step_direction`, `ed_undo_step_by_name` and
`ed_undo_step_by_index` do their actual specific actions, with their own
logic.
Note: Since the actual behavior of those three funtions is fairly
different (the first only undo/redo one effective step, the second is only
supposed to **undo** //before// given named step, and the third actually
undo/redo until given indexed step become active), we could also find
better names for those. right now, it sounds like they are doing the
same thing, with just different ways to specify the target step.
Note: This is part of on-going refactor work on undo system, see T83806.
Differential Revision: https://developer.blender.org/D10112
Support recovering blend files with scripts enabled,
needed to fix T85011, can be useful in general too.
Adding this also resolves an assert in BKE_autoexec_match,
since it ran even when scripts were enabled.
- Return success from WM_recover_last_session
- Avoid setting global variables is already called in WM_file_read.
While it didn't cause any problems, these assignments ran even when
recovering the session failed to load the file.
- Return OPERATOR_CANCELLED when the operator fails.
Returning success is needed to fix T85011.
Texture paint tools were using DEFAULT cursor instead of PAINT_CROSS cursor as vertex paint, weight paint and sculpt modes.
Before
{F9591366}
After
{F9591370}
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D10172
I'm learning how driver functions work, and I found a couple of typos in the driver_functions.py template file. Here's a quick patch to fix them up.
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D10149
Texture paint tools were using DEFAULT cursor instead of PAINT_CROSS cursor as vertex paint, weight paint and sculpt modes.
Before
{F9591366}
After
{F9591370}
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D10172
I'm learning how driver functions work, and I found a couple of typos in the driver_functions.py template file. Here's a quick patch to fix them up.
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D10149
Issue is visible here https://developer.blender.org/F8626313.
If there is enough space for both the item name and the library hint, display
both. Otherwise, clip either the item name, the library hint, or both so that
not more than 60% and 40% of the available width are used repectively.
There are further improvements we could do, as noted in T84188, this just fixes
the regression for the release.
Part of T84188. There were multiple reports about this, see merged in and
mentioned reports in T84188 and T78012.
wm.context_* operators typically have their options set by menus
or key bindings.
Re-using options in this case can cause problems where two
actions that change unrelated properties will re-use a setting
from the previous execution.
For example changing the lights Power impacted
changing it's Radius afterwards.
The RNA path used for animating the settings passed to the node tree
is incorrect. Currently it's just `settings.property_name`, but it's
the path from the ID, not the modifier, so it should be
`modifiers[modifier_name].settings.property_name`.
However, the "Settings" struct is separated in RNA and DNA, which means
that the callback to get the RNA path does not know about the modifier's
name in order to fill the above path, so some reference to the modifier
in the "Settings" struct would be necessary, which would create a
convoluted layout in the `ModifierData` struct.
Instead, this commit simply removes the "Settings" struct from RNA,
which isn't as elegant from the point of view of the Python API,
but otherwise it's a nice simplification. Note that we don't remove the
"Settings" struct from DNA, because it would break reading old files.
Differential Revision: https://developer.blender.org/D10175
Important lesson to be learned here, leaving comments
is great and in the moment, they usually make sense.
Many months later they may not quite make as much sense
any more and time will have to be spend to figure out
what was meant, all of this would have been averted with a
better comment.
The zero terminator in this case, I can find no evidence
of it being used or relied on at any point. It does however
break GTests's `EXPECT_EXIT` macro that stops looking in
the output as soon as it sees the zts and doesn't end up
looking at the actual assert text being thrown. Which in
turn makes the`fcurve_active_keyframe`test fail when run
in debug mode on windows.
Using rna iterators in range-based for loops is possible since {rBc4286ddb095d32714c9d5f10751a14f5871b3844}.
This patch only updates the places that are easy to update
without more changes in surrounding code.
Differential Revision: https://developer.blender.org/D10195
The implementation is currently optimized to load animation sequences once
and then quickly scrubbing through them. Later on an option should be added
to optimize for memory usage and only load the current frame into memory.
Currently mesh and curve objects are supported, including support for UV and
vertex color attributes. Missing still is support for arbitrary attributes and
motion blur, as well as better handling of changing topology. Shader assignments
are made using FaceSets found in the Alembic archive.
The animation (and constant) data of the objects inside the Alembic archive is
loaded at once at the beginning of the render and kept inside a cache. At each
frame change we simply update the right socket of the corresponding Cycles node
if the data is animated. This allows for fast playback in the viewport
(depending on the scene size and compute power).
Note this is not yet exposed in the Blender UI, it's a feature that is still under
development and not ready for general use.
Ref T79174, D3089
Procedurals are nodes in the scene that can generate an arbitrary number of
other nodes at render time. This will be used to implement an Alembic procedural
that can load an Alembic file into Cycles nodes. In the future we also expect to
have a USD procedural.
Direct loading of such files at render time is a standard feature in other
production renderers. Reasons to support this are memory usage and performance,
delayed loading of heavy scene data until rendering, Cycles standalone rendering
using standard file formats beyond our XML files, and shared functionality for
Cycles integration in multiple 3D apps.
Ref T79174, D3089
First step towards a better handling of relationships between IDs in
override context, especially when a resync is needed.
First, introduce a new flag to override operations,
`IDOVERRIDE_LIBRARY_FLAG_IDPOINTER_MATCH_REFERENCE`, for ID pointers.
It keeps track of whether an RNA ID pointer has been kept to its
'natural overriden ID' (in override hierarchy context), or has actually
been re-assigned to some other data-block.
Second, refactor how we deal with relationships between IDs in override
hierarchy code, especially in resync case. This will fixe several cases
listed in T83811, especially the case where an ID pointer to an existing
override needs to be updated to a new one due to a matching change in
linked data.
Filtering may make the Outliner tree empty. The function to find the drop
element should just return null then and let the caller decide how to deal with
it.
Although the Knife Project operator converts 3D coordinates to screen
space, it doesn't really need opengl.
Differential Revision: https://developer.blender.org/D10178
The "Layers" panel for Grease Pencil objects uses sub-panels to organize
their properties in categories. Currently, this isn't so clear.
This patch cleans up these sub-panels with clearer categorization.
Reviewed By: #grease_pencil, antoniov, Blendify, HooglyBoogly
Ref D10184
In the CompositorOperation::deinitExecution the viewer could be freed at
the same time it was drawn in the image editor or node editor. There is
a guard for that but wasn't added during the migration of the two
editors to the draw manager.
Building RC builds would parse `BLENDER_VERSION_CYCLE_NUMBER` that
doesn't exist anymore. It was removed by {D7748}.
This change removes it from `buildbot_utils.py`.
Currently, the object context menu includes some inconsistencies
between object types. This is a small patch that fixes these.
- Adds the same ability to Join and Set Origin
to all supported object types.
- Adds Set Active Camera for cameras.
- Adds Adjust Stroke Width for GP Objects.
- Adds Trace Image to Grease Pencil for Image Empties.
Reviewed By: #grease_pencil
Ref D10144
The `image_get_gpu_texture` didn't use the iuser->view_index but
recalculated the requested view again. This lead to inconsistent
behavior when switching between multi view textures or stereo textures.
This has been fixed by ensuring that the `iuser->view_index` is always
used.
An Image has only place to store 2 view textures. This is done for
right/left eye compositing. A multi view texture can have more views.
This would lead to reading and writing to unallocated space.
When a multiview texture is requested that is larger than 1. It will
always be cached as being the first eye. The `gpu_view` of the Image is
also used as a cache key to check this.
This got broken in 4b1112c8c9. A fix which will be consistent with image
editor is not obviously clear, so for the time being revert the change and
go back to state which was working for a long time.
A number of naming changes for consistency and clarity
- Use 'Adjust...' for all entries that adjust properties
rather than being normal operators.
- Follow naming conventions (ie Draw -> Display etc).
- Less naming ambiguity and more correctness and consistency.
Part of D10144
During multiview rendering the `cryptomatte_accum_buffer` is not cleared
between the views and leaves artifacts on the next view to be rendered.
This change clears the accum buffer when it already exists and will be
reused for the next view.
Passing 4x arguments for the rectangle,
mixed in with round-box radius & color wasn't very readable.
Instead, pass a `rctf` as the first argument to UI box drawing functions.
The new GPU_SHADER_2D_WIDGET_BASE shader allows us to draw
many complex shapes with anti-aliasing.
One thing it can do is draw an opaque rounded rectangle with colors
that differ between its interior and outline.
In order to do the above in a single pass I recently added an "_ex"
version of UI_draw_roundbox that exposes most of that shaders features.
This simplifies interface_draw.c by removing redundancy in the calling
of this shader by using this new uber "_ex" version.
Ref D10189
Modifications to triangle shader association were not considered when checking for updates and the associated device data array was not tagged as modified so it was not resent to the device(s).
Scene strips can't be prefetched and seq_prefetch_do_skip_frame()
should check if scene strip is in timeline. But it did not recurse into
meta strips, which resulted in crash.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9999
Generator strips with zero inputs have their length set to 1 pernamently.
In some cases it is useful to use speed effect on these strips because they
can be animated. This can be done by using their length as is on timeline as
content length.
This is very simplified and temporary solution, as cutting these strips won't
give expected results. Lot of code relies on length of these strips being fixed
to 1, resolving this properly should be done by T59540.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10026
Building proxy with meta strip selected resulted in attempt to render
meta strip itself and save result as image as is done when building
image proxies.
Remove meta strip from list of supported strips.
Multicam, Meta and scene strip are cleared from poll function in UI as well.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10001
This argument was used to prevent infinite loop in lookups between disk
and RAM cache.
Code was refactored, so this can be handled internally in cache.
Reviewed By: sybren, sergey
Differential Revision: https://developer.blender.org/D9955
Selecting inside an island no longer de-selects
when it's too far from an edge.
When edge select fails fall back to inside-face test.
This follows 908b383b7d
which made this change for face-select.
Apply to island selection since it doesn't make sense
for island select to behave differently.
Position Gizmo tooltips below their bounds so they do not obscure the content.
Differential Revision: https://developer.blender.org/D9793
Reviewed by Julian Eisel
The Asset Browser already displayed object-data assets, but you couldn't
actually drag & drop them. This is now supported.
The object-data drop poll needed access to the data-block. But with a small
tweak it doesn't need that and can just check the ID type (which is known for
asset dragging too).
Part of T82661.
If the poll check of the operator fails, the operator won't run. We can check
that in advance to hide the drop hint if dropping will fail anyway.
This improves feedback during dragging.
For assets, the copy callback of the drop-box would append the asset
data-block. Check if the operator's poll succeeds before calling the copy
callback.
Otherwise the data-block is "secretly" appended, which the user doesn't expect
and won't notice without checking the file data in the Outliner.
For masks I had to extend the poll function, it didn't check context
sufficiently.
The normal drag & drop support was already there, just needed minor tweaks to
respect asset importing. The dragged in mask will create a mask node for
compositor node editors.
Part of T82661.
The normal drag & drop support was already there, just needed minor tweaks to
respect asset importing. The dragged in image will create a image/texture node
for the internally known node-tree types (shader, texture and compositing
nodes).
Part of T82661.
The float array is declared inside a smaller scope, pointed to, and then
used later. This simply moves the declaration outside of the if statement.
Also remove two redundant lines.
Simplification and changes to the Navigation gizmo. Better indication of negative axes, consistent use of color and size to indicate orientation, ability to be resized.
Differential Revision: https://developer.blender.org/D9744
Reviewed by Campbell Barton
* tbb::blocked_range moved to a different namespace and since the fix is
non-trivial, remove some unused code that used this.
* Task group priorities are no longer supported. It's unclear if they are
useful at all right now and even set correctly, for now all tasks are equal
priority with TBB 2021.
There are a couple of operations that are meant to set the active
modifier that currently don't. The first is a mouse press on the drag
icon on the right of the header, and the second is mouse presses on
modifier sub-panels headers.
This was an oversight in the implementation, especially the second,
because the blank space on the right of a sub-panel header often looks
just like the blank space elsewhere on the modifier's panel that
*does* set the active modifier.
Note that this purposefully doesn't include collapsing and expanding
the modifier as operations that set the active, since regardless of
whether that makes sense, it wasn't in the agreed upon design, which
would ideally not need changing for 2.92.
Differential Revision: https://developer.blender.org/D10155
This optimizes device updates (during user edits or frame changes in
the viewport) by avoiding unnecessary computations. To achieve this,
we use a combination of the sockets' update flags as well as some new
flags passed to the various managers when tagging for an update to tell
exactly what the tagging is for (e.g. shader was modified, object was
removed, etc.).
Besides avoiding recomputations, we also avoid resending to the devices
unmodified data arrays, thus reducing bandwidth usage. For OptiX and
Embree, BVH packing was also multithreaded.
The performance improvements may vary depending on the used device (CPU
or GPU), and the content of the scene. Simple scenes (e.g. with no adaptive
subdivision or volumes) rendered using OptiX will benefit from this work
the most.
On average, for a variety of animated scenes, this gives a 3x speedup.
Reviewed By: #cycles, brecht
Maniphest Tasks: T79174
Differential Revision: https://developer.blender.org/D9555
`bmain.relations` is used to store temp data of relations between IDs,
to speed-up some complex processes heavily relying on such information.
Previous implementation was failry unclear/confusing, and required a
not-so-nice hack to 'tag' some ID as processed.
New code changes as such:
* Using `from`/`to` naming (instead of `user`/`used`).
* More clear separation between `to` `id_pointer` and `from` one,
using an union instead of hacking around difference between `ID *` and
`ID **` pointers.
* Adds storage of `session_uuid` informations (mainly useful as
debug/ensuring proper consistency of data currently).
* Adds a structure per ID in the mapping. This enables possibility of
storing tags (and potentially more data in the future) per-ID,
without polluting the IDs themselves with very short-life info.
Differential Revision: https://developer.blender.org/D10164
Currently this is needed to properly tag PointCache's for info update
(fixes an issue reported in T82503).
Suspect we may need this in more cases in the future though, RNA
assign/update processes are not always 100% enough to deal with
complicated corner cases.
Double floating point precision is an extension of OpenCL, which might
not be implemented by certain drivers, such as Intel Xe graphics.
Cycles does not use double floating point precision, and there is no
need on keeping doubles unless there is an explicit decision to use
them.
This is a simple fix from Cycles side to replace double floating point
type with a type of same size and alignment rules. Inspired by Brecht
and Patrick.
Tested on NVidia Titan V, Radeon RX Vega M, and TGL laptop.
Differential Revision: https://developer.blender.org/D10143
Previously float2 was converted to float3 by implicitly converting to a
float pointer first, which was then passed to the float3 constructor.
This leads to uninitialized memory in the z component of the new float3.
Ideally this should be solved in float2/float3 itself, but my first fix for
that resulted in a compile error: rB6ac0a3d83c8e5a39bd5356aa0d68e3166bd91e82
This is an alternative fix that can be used for now. Will have to look
into the conversion in more detail again.
Was happening when there are deform modifiers prior to the multires.
There are detail in the comment around sculpt_undo_refine_subdiv(),
but briefly: the subdiv was refined with wrong base mesh coordinates.
Differential Revision: https://developer.blender.org/D10158
Previously float2 was converted to float3 by implicitly converting to a
float pointer first, which was then passed to the float3 constructor.
This leads to uninitialized memory in the z component of the new float3.
We will need to expand this node soon to add weight/count for different
elements inside the collection. For that it is better to have the node
to use its own DNA.
Thanks to that same point cache being exposed in **four** different RNA
paths (twice in particle system, and twice in its embedded cloth
simulation settings).
Only way is to also make particle system overridable.
Dividing the workload by number of tasks in float is imprecise and
lead in some cases to particles not being calculated at all
(example: 20000 particles, 144 tasks).
Switching this calculation to integer makes sure we don't lose count.
Differential Revision: https://developer.blender.org/D10157
Dividing the workload by number of tasks in float is imprecise and
lead in some cases to particles not being calculated at all
(example: 20000 particles, 144 tasks).
Switching this calculation to integer makes sure we don't lose count.
Differential Revision: https://developer.blender.org/D10157
While the previous fix for T84920 is correct, the crash could still be
triggered by changing the active object while in edit-mode.
Ensure stale data isn't used by tagging for depsgraph update when
edit-mode data is freed on undo.
While exiting edit-mode normally does this, it's possible to set the
active object to a non edit-mode mesh, skipping the mode-switch
operator and it's depsgraph tagging.
Regression from d8992192e5
The original code relied on having a separate edit-object pointer
than the active object.
Use a utility function to avoid code duplication as there are
other areas that have similar functionality.
Selecting markers and cameras could crash when in edit-mode.
Only support this in object mode as mode-switching as part of
activating cameras doesn't seem like a priority.
This has the same root cause as T84920.
This uses the values form the stroke automasking cache to control the
falloff of all deformers in the boundary brush. Usually this is already
considered in the general brush falloff function for the rest of the
brushes, but this is one of the exceptions where the brush implements
its custom falloff.
Reviewed By: JacquesLucke
Maniphest Tasks: T84896
Differential Revision: https://developer.blender.org/D10161
E.g. the graph editor channels list would still show the old name of a material
that was renamed in the Outliner. Same for the Asset Browser when showing
data-blocks in the "Current File" repository.
The Outliner didn't send the notifier for some data-block types that editors
listen to for data-block name changes.
The "Current File" asset library didn't get refreshed after the data-block name
changed. But rather than entirely refreshing the file list, or doing possibly
problematic partial refreshes, reference the data-block name directly, so a
simple redraw gets the new name displayed.
Addresses T83751
Mouse cursors used during transforms made to work better with changes of user scale and line width.
Differential Revision: https://developer.blender.org/D9668
Reviewed by Campbell Barton
This node allows sampling a texture for every vertex based on some
mapping attribute. Typical attribute names are the name of a uv map
(e.g. "UVMap") and "position". However, every attribute that can be
converted to a vector implicitly is supported.
It should be noted that as of right now, uv map attributes can only be
accessed after a Point Distribute node.
Ref T82584.
Differential Revision: https://developer.blender.org/D10121
This extends the "blender_debug_gpu.bat" batch file to also be useful for triaging Cycles
problems. OptiX initialization errors or problem while iterating CUDA devices are only
logged when the `--debug-cycles` flag is specified, so adding that here.
Reviewed By: brecht, LazyDodo
Differential Revision: https://developer.blender.org/D10167
The Asset Browser is still considered an experimental feature right now. But it
can be enabled by default for alpha builds, to get further testing and
feedback. It will hopefully be a non-experimental feature by the end of bcon1.
This is done in agreement with Dalai.
For the most part, this just adds boilerplate code for volume support in geometry nodes:
* Add `VolumeComponent` next to `MeshComponent`, etc.
* Support `VolumeComponent` in depsgraph object iterator.
Furthermore, I added initial volume support in a few nodes:
* The Object Info node outputs an object instance when the input is a volume object
(that will be the same for mesh objects soonish, to avoid copies).
* Support transforming a `VolumeComponent` in the Transform node.
* Support the `VolumeComponent` in Join Geometry nodes, but only when just one of the
inputs has a volume component for now.
Right now, there is no way to create a `VolumeComponent`, because the Object Info node
outputs an object instance. The `VolumeComponent` will be necessary for upcoming nodes,
which will generate volumes on the fly.
Viewport selection does not work correctly with `VolumeComponent`s currently. I don't
know why that is. That can be figured out a bit later, once we can actually create
new volumes in geometry nodes.
Ref T84604.
Differential Revision: https://developer.blender.org/D10147
Adopt some of the newer layout abilities to
clean up the Particle Tool Properties a bit.
- Use in-line check-boxes next to values.
- Use text heading for Preserve toggles and mirror/topology mirror.
Reads clearer. Uses less space. Is more consistent.
Reviewed By: #user_interface, pablovazquez, Blendify, campbellbarton
Ref D10130
There was a bug which which prevented box and lasso select to work
correctly in GP Edit Mode. It would select a nearby vertex before the
box selection.
This patch fixes it so it works with a click event,
like the default keymap, which fixes box and lasso selection.
Ref D10119
Uninitialized stack memory was being re-used in a loop.
Error in original commit from 04f81c8225
This happened to work as the same memory location was re-used
between iterations and not overwritten.
In fact, the drawing was that of the local contraint axis (which is
summarized so as not to fill the screen with too much information).
Use the local contraint axis only when more than one object is selected.
Branched path tracing is not supported for OptiX, and it would still use the
number of AA samples from there when branched path was enabled by the user
earlier but auto disabled and hidden in the UI when using OptiX.
Ref D10159
Tile stealing may steal a CPU tile buffer and move it to the GPU, but next time around that
tile may be re-used on the CPU again (in progressive refinement mode). The buffer would
still be on the GPU then though, so is inaccessible to the CPU. As a result Blender crashed
when the CPU tried to write results to that tile buffer.
This fixes that by ensuring a stolen tile buffer is moved back to the device it is used on before
rendering.
A regression since 2.80: need to use evaluated mask to calculate
its bounds. Non-evaluated mask does not contain state for the
current frame, so iterating over control points of the original
mask gives points state from the time they were edited last (aka,
not affected by the animation).
- Zooming out a lot faster than zooming in,
it had the wrong aspect ratio, make all the preparations
with the factors instead of deltas.
- Improved following the `zoom_invert`
(should not apply to `MOUSEZOOM`) and "trackpad natural scroll"
preferences.
- `zoomfac` adjustment, same as in `view_zoomdrag_modal`.
Ref D8686
- Rename to "Link/Transfer Data".
- Move Mesh Data Transfer operators here from the Relations sub-menu.
- Clarify which operations links to, copies or transfers/projects
data using Link, Copy and Transfer leading text.
- Re-order contents to fit each category and add separators.
- Add enum tool-tips.
Reviewed By: Blendify, campbellbarton pablovazquez, mont29
Ref D10090
When the mouse cursor is inside the UV face,
extend the selection threshold.
This means when zoomed in, a face can always be selected when the cursor
is inside it.
In the case of multiple overlapping faces - the face with the closest
center is used.
----
Prior to 246efd7286, the UV selection
threshold was scaled by the zoom level, so selecting a face when zoomed
in close would often often select faces even when the on-screen center
was outside the intended threshold.
Having a zoom-independent threshold may require more precision than
users are used to.
This change addresses this.
Splitting assignments between functions complicates refactoring.
Also rename 'hit_final' to 'hit', since there are no longer a local
'hit' variable defined in these functions.
This commit moves runtime-only variables from the `SpaceNode`
DNA struct to a private struct in `node_intern.h`. Before, it was hard
to tell which data needed to be saved in files, this should make it
more clear.
Node that the `edittree` field is basically a runtime variable, since
it's set from the `treepath` list on read, but moving it would require
some more invasive changes that I don't think are worth it right now.
Also, not all of the moved variables were explicitly cleared on read--
`aspect` is set at the start of a redraw, `cursor` is set in a region
callback, and `recalc` was used as an update flag.
Differential Revision: https://developer.blender.org/D10141
Things like pointers to particle systems, or softbody data being stored
outside of its modifier, make it impossible for internal modifier copy
data code to be self-contained currently. It requires extra processing.
In existing code this was handled in several different places, in
several ways, and alltogether fairly inconsistently. Some cases were
even not properly handled, causing e.g. crashes as in T82945.
This commit addresses those issues by:
* Adding comments about the hackish/unsafe parts `psys` implies when
copying some modifier data (since we need to ensure particle system
copying and remapping of those pointers separately).
* Adding as-best-as-possible handling of those cases to
`BKE_object_copy_modifier` (note that it remains fragile, but is
expected to behave 'good enough' in any practical usecase).
* Remove special handling for specific editor code
(`copy_or_reuse_particle_system`). This should never have been
accepted in ED code area, and is now handled by
`BKE_object_copy_modifier`.
* Factorize copying of the whole modifier stack into new
`BKE_object_modifier_stack_copy`, now used by both `object_copy_data`
and `BKE_object_link_modifiers`.
Note that this implies that `BKE_object_copy_modifier` and
`BKE_object_copy_gpencil_modifier` are now to be used exclusively to
copy single modifiers. Full modifier stack copy should always use
`BKE_object_modifier_stack_copy` instead.
Fix T82945: Crash when dragging modifiers in Outliner.
Maniphest Tasks: T82945
Differential Revision: https://developer.blender.org/D10148
Things like pointers to particle systems, or softbody data being stored
outside of its modifier, make it impossible for internal modifier copy
data code to be self-contained currently. It requires extra processing.
In existing code this was handled in several different places, in
several ways, and alltogether fairly inconsistently. Some cases were
even not properly handled, causing e.g. crashes as in T82945.
This commit addresses those issues by:
* Adding comments about the hackish/unsafe parts `psys` implies when
copying some modifier data (since we need to ensure particle system
copying and remapping of those pointers separately).
* Adding as-best-as-possible handling of those cases to
`BKE_object_copy_modifier` (note that it remains fragile, but is
expected to behave 'good enough' in any practical usecase).
* Remove special handling for specific editor code
(`copy_or_reuse_particle_system`). This should never have been
accepted in ED code area, and is now handled by
`BKE_object_copy_modifier`.
* Factorize copying of the whole modifier stack into new
`BKE_object_modifier_stack_copy`, now used by both `object_copy_data`
and `BKE_object_link_modifiers`.
Note that this implies that `BKE_object_copy_modifier` and
`BKE_object_copy_gpencil_modifier` are now to be used exclusively to
copy single modifiers. Full modifier stack copy should always use
`BKE_object_modifier_stack_copy` instead.
Fix T82945: Crash when dragging modifiers in Outliner.
Maniphest Tasks: T82945
Differential Revision: https://developer.blender.org/D10148
When dragging an object into the 3D View, e.g. from the Outliner or the Asset
Browser, other objects wouldn't get deselected. That differs from what other
drop operations do, which create a new object. They deselect other objects in a
lower-level function, which happens to not be called for just dropping objects.
So I guess this is an oversight.
Old behavior was also a bit annoying because users seem to expect this to
deselect.
Caused by rBbbb2e0614fc3.
Oversight to not take the remapped framelength into account.
Maniphest Tasks: T84784
Differential Revision: https://developer.blender.org/D10134
`BKE_volume_is_loaded` uses `grids.filepath` to determine if the
grids are already loaded. The issue was that `grids.filepath` was
set before the grids were loaded, resulting in incorrect early
returns for other threads.
Differential Revision: https://developer.blender.org/D10150
By design the modified object transformations should still work and
affect the geometry nodes results. The current behaviour, however, would
make the geometry from the object info to not be affected by the
modified object transformations. This patch changes that by default.
In a similar fashion the Location, Rotation and Scale sockets outputs
should be aware of whether the output should be in the global space or in the
space of the nodetree.
To solve this, the patch introduces a new transformation space "enum"
where users can pick "Original" or "Relative" space.
Original
--------
Output the geometry relative to the input object transform, and the
location, rotation and scale relative to the world origin.
Relative
--------
Bring the input object geometry, location, rotation and scale into the
modified object maintaining the relative position between the two objects in
the scene.
Relative space violates a bit the design of the nodetree. The geometry in this
case is transformed so that moving the modified object doesn't interfere with
the geometry. This is particularly useful for the boolean node for instance.
"Original" is the default space, but old files are set to "Relative" for
backwards compatibility.
Differential Revision: https://developer.blender.org/D10124
When reassigning an effect strip to another sequence, any animation data
in the effect strip will not be offset like expected.
The fix calls `SEQ_offset_animdata` to offset the animation data after
the seqence has been moved.
Reviewed By: ISS
Maniphest Tasks: T84642
Differential Revision: https://developer.blender.org/D10096
The movie clip's `region->v2d` was being resized by the view2d code,
causing mouse cursor to movie-clip coordinate mapping to fail.
This commit removes `UI_view2d_region_reinit`,
matching the behavior for the image editor's 2D view.
Reviewed By: sergey
Ref D10106
Copy the smooth setting when filling in curve caps.
For drawing this doesn't change behavior as a single normal is used
for all faces.
The difference may be noticed when converting to a mesh or with
modifiers applied.
Bevel caps always had incorrect normals, causing display glitches
in some cases.
It seems this never worked properly (at least 2.79 also had this bug).
Use the projection vector as the normal.
When using the interactive add tool for primitives with a fixed
height and base aspect ratio, the height of the created primitive
would be incorrect (two times too small or two times too big).
When the base origin was centered, the `fixed_aspect_dimension`
was not changed even though the base length was doubled.
Additionally, when the height origin was centered but the height
aspect ratio was fixed, the height was doubled leading to an
incorrect size.
The fix doubles `fixed_aspect_dimension` when the base origin is
centered and correctly calculates the height of the primitive when
the aspect ratio is set to fixed.
Ref D10140
Match Blender 2.7x keymap more closely.
- Image Editor: F3 for save image as.
- Node Editor: Ctrl-LMB to cut links.
- Cycle the falloff types instead of showing a pie-menu.
- Use regular menu instead of pie menu for snapping.
These functions with many arguments can be unwieldy. Aside from the obvious issues
with rewriting the list of arguments and the opportunities for error and frustration
that presents, the long list of arguments make these systems hard to change. So when
an argument should be added, someone might skip that and add some hack instead.
So, as proposed in T73586#1037210, this patch instead uses a "params" struct for
each of these callbacks.
- Use param argument for `ARegionType.listener`
- Remove unused window field in region listener
- Use param argument for `SpaceType.listener`
- Use params struct for `ARegionType.message_subscribe`
Differential Revision: https://developer.blender.org/D9750
The double quaternion blending method in addition to the deformation
matrix of each bone requires their rest matrices. For ordinary bones
this literally should use the bone rest matrix without any ambiguity.
However, it was also using the bone rest matrix for all of its
B-Bone segments, which is incorrect and causes strange deformation
in some cases involving extreme non-uniform scale, especially
at boundaries between different B-Bones. There is also a similar
known issue that happens with scale at bending joints, and this
fix reduces the distortion when both bones are B-Bones.
This changes both the Armature modifier and the Armature constraint
to use the actual segment rest matrices. Unlike bones, these can have
scale even in rest pose, so normalization is required.
Differential Revision: https://developer.blender.org/D10003
Average selected tracks into the new one. This can be used to improve
stability of tracking on blurry or non-very-sharp feature shapes.
Averaging happens for all position, pattern corners and search area.
Disabled markers do not take effect on averaging. Keyframed flag is
copied from source.
Gaps in the source tracks will be linearly interpolated, to reduce
result track jump. Note that this only applies to gaps "inbetween".
This means that if an input track doesn't have markers in the
beginning/end of it, there is nothing to interpolate with and the
result track will jump.
Available from the Track panel, under the Merge category.
Differential Revision: https://developer.blender.org/D6323
There are two main things.
First, remove the marker index caching. Thins makes it possible to
safely use function from a threaded environment.
Second, replace linear search with binary search, which speeds up
random lookup.
There is no measurable difference in the stabilization which had a
comment about caching nature of track lookup. The random lookup
complexity changed from O(N) to O(log N). In practice this also
unlikely to be measurable, but thread-safety worth it.
If extensions string is longer than 1024 then the old code would have
reported empty string instead of extensions.
Now the code does dynamic string allocation to store result of request,
similar to what is done in `OpenCLInfo::get_hardware_id`.
The code looks a bit ugly, but it didn't really change much with this
patch. In other words, the code can become more modern and clear, but
it is considered to be outside of the scope of this change.
Differential Revision: https://developer.blender.org/D10135
The OptiX denoiser is part of the OptiX device, so to the tile manager looks like a GPU device. As a
result the tile stealing implementation erroneously stole CPU tiles and moved them to that OptiX
device, even though in this configuration the OptiX device was only set up for denoising and not
rendering. Launching the render kernel therefore caused a crash because of a missing AS etc.
This fixes that by ensuring tiles can only be stolen by devices that support render tiles.
overrides
Editing bone groups is not supported on proxies/overrides [changes a re
lost on file reload], need to do proper polling (and also prevent this
from rna) for:
- adding bone groups
- removing bone groups
- renaming bone groups
- setting bone groups colors
Previously, this was hinted at by setting the layout inactive, with
preoper polls, this is now not needed anymore.
note: Selection of bone groups actually makes sense here and is
supported, so this is not prevented in this patch, but UI wise this is
not nice in the override case, because one cannot set an active_index
(aka select) in the UI list.
Maniphest Tasks: T84600
Differential Revision: https://developer.blender.org/D10131
Individual projection is a different branch of snap and always projects
the transformed elements on the surface of objects.
Perhaps this option should be limited to the Move mode due to similarity.
But in order not to change the current behavior too much, this commit only
disables this option in modes not affected by snap.
Outliner display under 'Animation' > 'NLA Tracks' was not updating in
the following cases:
- adding strips
- removing strips
- duplicating strips (possibly to different track)
- swapping strips
- reordering tracks
- changing strip order by translating
- translating strips between tracks
- renaming tracks
In the case of deleting strips/tracks, this was also resulting in a use-
after-free error in Outliner drawing code (this was reported specifically
in T84586).
Most of these operators already sent a ND_NLA|NA_EDITED notifier, but the
Outliner is not listening to these. Listening to NA_EDITED is also not
what we want since this also happens a lot in cases irrelevant to the
Outliner. Now be a bit more specific and send ND_NLA|NA_ADDED / ND_NLA|
NA_REMOVED or a new ND_NLA_ORDER (to distinguish from NA_EDITED
'only' - where a redraw is not neccessary) and listen to these from the
Outliner.
(note: places that were listening to ND_NLA|NA_EDITED before are also
listening to NA_ADDED or NA_REMOVED, so changing NA_EDITED should not be
a problem here)
(note 2: for cases like swapping tracks/strips order, NA_ADDED or
NA_REMOVED does not make sense, neither can we use NA_EDITED [since we
dont want to listen to this], so in this case an additional ND_NLA_ORDER
is now sent)
(note 3: in nla transform code, this is now always sent on confirm. There
are cases were the notifier would not be needed, but checking exactly all
cases were it actually would be needed seems overkill [history of D10073
has example code to check if strips moved between tracks])
Maniphest Tasks: T84586
Differential Revision: https://developer.blender.org/D10073
The WORLD_UPDATE operation (needed to free the gpu material) was already
defined in DepsgraphNodeBuilder::build_world, but corresponding relation
was only set up for changes in the nodetree, not for changes in the
world/material itself in DepsgraphRelationBuilder::build_world.
Direct changes to these surface properties in the UI were updating
properly through RNA property update callbacks, but these are not called
from the animation system.
So now add these relations in the depsgraph.
Not 100% sure this is the right place for this (since e.g. eevee engine
seems to handle e.g. animated light paramters just fine through
EEVEE_cache_populate / eevee_light_setup, but properly freeing gpu
materials wont happen for worlds in e.g eevee_id_world_update and also
not for materials)
Maniphest Tasks: T84250
Differential Revision: https://developer.blender.org/D9959
Extend the pose bone "clear loc/rot/scale" functions so that they
respect the "Mirror X" option.
Reviewed By: sybren
Maniphest Tasks: T83657
Differential Revision: https://developer.blender.org/D9938
Extend the pose bone "clear loc/rot/scale" functions so that they
respect the "Mirror X" option.
Reviewed By: sybren
Maniphest Tasks: T83657
Differential Revision: https://developer.blender.org/D9938
The target stroke bounding box was not checked properly and when using layer transform the error was noticeable, but really the error was before the layer transform commit.
This implements the node tree update function, which is needed so that the
reroutes get updated to the correct type. It is based on the same code in
the shader and compositor node trees.
Differential Revision: https://developer.blender.org/D10123
When using grease pencil for drawing Storyboards, it's very common to require a transform of the layers. This transform can be done using the offset modifier, but in some cases, the scene requires a lot of modifiers and makes the file hard to work.
This new feature adds a transforms Location, Rotation and Scale at Layer level, and allows to transform the layer without using a modifier, keeping the scene more clean.
{F9480695}
This feature was suggested by @pepeland after receiving feedback from several artists.
Also, done some code cleanup and rename some functions to get a better naming.
Maniphest Tasks: T83660
Differential Revision: https://developer.blender.org/D9761
The issue was that the mesh shared its vertex weights with the
original mesh (to reduce memory consumption). The solution is
to make a local copy of the vertex weights in this case.
This adds a "Snap to" option that allows using all the scenes snap
settings which includes incremental & absolute grid snapping options.
This is optional because always following scene snapping would not
snap to geometry by default (which seems to be the most useful default).
The absolute position desktop mapping has been corrected. The correct
mapping is 0-65535 inclusive. Additionally, division by the virtual
desktop width and height needed to be subtracted by 1 as width and
height are one more than the final pixel index.
Those (aka root node trees and master collections) share same 'traits'
as the shapekeys: RNA cannot assign them, so we need to handle them as
sub-data of their owner IDs.
Not sure how much this will help in improving support of overrides for
scenes and nodetrees, but this is a mandatory step towards that goal for
sure.
We should now have the tools to ensure consistency of ID pointers
diffing in `rna_property_override_diff_propptr`.
As a reminder, for most ID pointers we just check the actual pointer value,
but this is not possible for embedded IDs like root node trees or master
collections, and for fake embedded ones like shapekeys, so those should be
handled as mere sub-data of their owner IDs in override context.
Code generating override operations would not deal properly with Pointer
RNA properties, trying by default to use and check pointers' names
properties like it does with items of a collection.
However, using name property in pointer RNA property case makes no
sense, so specialize the `no_prop_name` flag for each case (pointer or
collection).
here, since second override would generate local data-blocks with
different names than the linked data ones, name matching would fail and
breck handling of override diffing in shapekeys.
Note that shape keys are the only one concerned by that problem, since
other embedded IDs (root node trees and master collections) are fully
real ones, so they always get the same names.
Our beloved shapekeys are 'virtual' overrides, they need special
snowflake treatment here as well.
They do not have any override data, from override perspective they are
considered as mere sub-data from their owning ID (mesh, lattice, etc.).
Therefore, we should not copy override data from them, but instead
properly flag those new IDs as `LIB_EMBEDDED_DATA_LIB_OVERRIDE`.
Found while investigating T84373.
Code generating override operations would not deal properly with Pointer
RNA properties, trying by default to use and check pointers' names
properties like it does with items of a collection.
However, using name property in pointer RNA property case makes no
sense, so specialize the `no_prop_name` flag for each case (pointer or
collection).
here, since second override would generate local data-blocks with
different names than the linked data ones, name matching would fail and
breck handling of override diffing in shapekeys.
Note that shape keys are the only one concerned by that problem, since
other embedded IDs (root node trees and master collections) are fully
real ones, so they always get the same names.
Our beloved shapekeys are 'virtual' overrides, they need special
snowflake treatment here as well.
They do not have any override data, from override perspective they are
considered as mere sub-data from their owning ID (mesh, lattice, etc.).
Therefore, we should not copy override data from them, but instead
properly flag those new IDs as `LIB_EMBEDDED_DATA_LIB_OVERRIDE`.
Found while investigating T84373.
This commit adds the ability to provide a default value to
`attribute_try_get_for_output` and uses it for the `Point Scale` node,
which is important because the node uses multiplication.
The idea is to keep "name-specific" functionality in nodes rather than in
the attribute API, otherwise the complexity will be hard to keep track of.
So this fix doesn't apply to the Attribute Vector Math node, but hopfully
that is okay since that's now a lower level node for this purpose anyway.
Differential Revision: https://developer.blender.org/D10115
Use exact marker accessor. Harmless due to the current way the
transform system is used by tracking. But for the future development
proper accessor needs to be used.
Cycles has a lot of code like this:
```lang=c++
BL::Object::modifiers_iterator b_mod;
for (b_ob->modifiers.begin(b_mod); b_mod != b_ob->modifiers.end(); ++b_mod) {
```
Range-based for loops allow us to simplify this to:
```lang=c++
for (BL::Modifier &b_mod : b_ob->modifiers) {
```
In order to support this, a collection (such as `b_ob->modifiers`) must have
a `begin()` and `end()` method, that take no parameters and return an iterator.
The `end` method already exists, but the `begin` method takes the iterator as
argument currently.
This patch adds a new `begin` method that returns the iterator. The old `begin`
method is still available to avoid breaking existing code.
My assumption is that the old `begin` method took the iterator as parameter so
that the iterator is not copied or moved, i.e. its memory address is stable and
the destructor is only called once. I'm not sure if both of these requirements
are really necessary to ensure that the iterators work correctly. To be on the
safe side, I deleted the copy/move constructors/assignment operators.
Since C++17 there is "guaranteed copy elision" which basically allows us to
return a non-copyable and non-movable type from a function. To make that work,
I had to add a new constructor to `CollectionIterator` that calls `begin` on itself.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D10120
This commit changes the check at the beginning of the
"Make Instances Real" operator to account for the instances
created by nodes modifiers in the modifier stack.
Differential Revision: https://developer.blender.org/D10059
If the mesh has any corner or point attributes (e.g. vertex weights or
uv maps), those attributes will now be available on the generated points
as well.
Other domains can be supported as well. I just did not implement those yet,
because we don't have a use case for them.
Differential Revision: https://developer.blender.org/D10114
For term consistency with usage.
The clarity is more for consistency with the nla domain() processing
function names and the core struct member name it stores the results
in, "valid". The name "domain", which implies a function can operate
on it, seems more natural than "valid", which implies something is
wrong if false.
No functional changes.
Reviewed by: sybren
Differential Revision: http://developer.blender.org/D9692
The field will already be properly written to in (anim_sys.c)
nla_eval_domain_action(). It's easier to understand the property's
usage after removing the redundancy.
No functional changes.
Reviewed by: ChrisLend, sybren
Differential Revision: http://developer.blender.org/D9689
No functional changes.
Future patches {D8867} {D8296} make use of it.
Reviewed by: sybren, ChrisLend
Differential Revision: http://developer.blender.org/D9691
No intended functional changes.
Refactors animsys_evaluate_nla() into 2 versions:
animsys_evaluate_nla_for_keyframing(), animsys_evaluate_nla_for_flush()
to make it clear what data is being calculated and why.
Dummy strip creation has been refactored to two separate functions,
animsys_create_tweak_strip() and animsys_create_action_track_strip().
Both are evaluated differently from other strips and eachother. There's
no need to interweave them. A future patch D8296, generally requires
both strips.
___
XXX anim_sys.c) nlatrack_find_tweaked() is a temporary work around.
If anyone has any insight into this problem, help is appreciated.
Reviewed by: sybren
Differential Revision: http://developer.blender.org/D9696
Previously the colors were on the right for outputs, but this is now
unecessary because of the organization in separate panels after
rBb1d1a58c77fb1658.
When NLA strips weren't time-aligned with the underlying action, then
fcurve modifiers would not be drawn anchored to the strip. Fmodifiers
were evaluating properly, they just weren't drawn with the proper
offset and scale.
To fix it in this specific case, I've chosen to undo the keyframe
remapping then remap the draw-evaluation-time from scene time to
fcurve time. Afterward, I redo the keyframe remapping so the controls
are properly drawn.
The Envelope fmodifier has special drawing code which was fixed too. In
this case, no mapping at all was happening. The solution was similar,
to remap the envelope control points from fcurve time to scene time.
This patch adds a noise offset option to the grease pencil noise modifier.
It allows the user to animate the noise along the length of the stroke to create movement that is currently not possible.
It works by adding an offset to the noise table and adding the remaining floating point value to the noise table sampling.
Reviewed By: #grease_pencil
Differential Revision: https://developer.blender.org/D10021
Instead of submitting tons of tiny IO syscalls, we can speed things up
significantly by `mmap`ing the .blend file into virtual memory and directly
accessing it.
In my local testing, this speeds up loading the Dweebs file with all its
linked files from 19sec to 10sec (on Linux).
As far as I can see, this should be supported on Linux, OSX and BSD.
For Windows, a second code path uses `CreateFileMapping` and
`MapViewOfFile` to achieve the same result.
Reviewed By: mont29, brecht
Differential Revision: https://developer.blender.org/D8246
When NLA strips weren't time-aligned with the underlying action, then
fcurve modifiers would not be drawn anchored to the strip. Fmodifiers
were evaluating properly, they just weren't drawn with the proper
offset and scale.
To fix it in this specific case, I've chosen to undo the keyframe
remapping then remap the draw-evaluation-time from scene time to
fcurve time. Afterward, I redo the keyframe remapping so the controls
are properly drawn.
The Envelope fmodifier has special drawing code which was fixed too. In
this case, no mapping at all was happening. The solution was similar,
to remap the envelope control points from fcurve time to scene time.
Note that uv layers still can't be accessed with nodes, because those
only access attributes on the point domain currently, while uv data
is stored per corner. Implicit domain conversion hasn't been
implemented yet.
Some of these conversions are arbitrary to some degree.
However, the user experience is better when at least something
happens when converting between types, instead of just getting
zeros. I left out a few conversions that I wasn't sure about yet.
I also added conversions for float2.
When building with more aggressive optimization flags, GCC will add FMA
(Fused Multiply Add) instructions that will slightly alter the floating
point operation results.
This causes some automated tests to fail in blender.
In clang and the intel compiler ffp-contract is set to off per default
it seems from my research. (They do not have the exact same setting,
but the default seems to match the off behavior)
Reviewed By: Brecht
Differential Revision: http://developer.blender.org/D9047
When building with more aggressive optimization flags, GCC will add FMA
(Fused Multiply Add) instructions that will slightly alter the floating
point operation results.
This causes some automated tests to fail in blender.
In clang and the intel compiler ffp-contract is set to off per default
it seems from my research. (They do not have the exact same setting,
but the default seems to match the off behavior)
Reviewed By: Brecht
Differential Revision: http://developer.blender.org/D9047
This fixes the behavior of some nodes when the same attribute
name is used for input and output. If both attributes have a
different type, they can't exist at the same time. Therefore,
the input attribute has to be removed in order to create the
output attribute.
Previously, the input attribute was remove before it was used
in any computations. Now, the output is written to a temporary
buffer and only later saved in the geometry component. This
allows both attributes to coexist within the node.
The temporary attribute is only create when necessary. The
normal case without name collisions still works the same
as before.
Differential Revision: https://developer.blender.org/D10109
Ref T83793.
Clamp value to the -HALF_MAX .. HALF_MAX.
The non-clamped values were causing NaN and inf values saved to
the file, which was the root cause of glare node giving unexpected
result.
The nan/inf on overflow is something mentioned in the half data
type in OpenEXR header.
Differential Revision: https://developer.blender.org/D10105
Fixes a number of glitches, e.g. the sidebar disappearing when selecting an
asset or wrong AZones (the little chevrons to indicate a hidden region).
There were a couple of issues:
* Execution region was created, but not used.
* If an execution region already existed when refreshing the area, it was
tagged as hidden, not removed.
* The sidebar was always set to be hidden on refreshes.
* When toggling from Asset Browser to File Browser as regular editor (i.e. not
opened temporary via Ctrl+O or such), the sidebar region wasn't removed.
Adresses T83644.
Now the resolution can be reduced to get less details. This is very useful for doing storyboards to get a quick fill of any character.
Following UI review, the name "Resolution" has been changed to "Precision" because is more clear.
Differential Revision: https://developer.blender.org/D10076
The other output types did not work currently anyway.
There is not a significant benefit in somehow deducing the output
attribute type from the existing attribute types.
`ED_undo_gpencil_step` only support valid undo step direction, passing
step name here is useless and only add confusion to what works or not.
Undo by step name or step index is fully not supported by GPencil undo
mode currently.
Note that since GPencil undo mode does not seem to ever be used anyway,
this is not an urgent issue in practice, but this needs to be cleaned up
at some point. See also T84703.
Handle return value of `fread()`, by showing an error message when the
file cannot be read from and stopping further processing. Not only is
error handing a good idea, it also prevents GCC from warning that the
return value of `fread()` should not be ignored.
This is similar to {D9916}.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D10079
Before transform cancel will request marker at a current frame number
and restore transform flags to it. This worked fine if there was only
one marker from track in the transform data. This did not work correct
when multiple markers from track were added to transform data.
This allows to implement proportional editing in the clip editor.
Allows to easily implement more comprehensive checks about which
markers get added to the transformation context.
No user measurable changes are expected, purely house-keeping to
ease an upcoming development.
Reduce amount of duplicated pointer offset logic: advance transform
data pointers deep in the loop rather than have offset duplicated in
the outer loop.
Array size calculation still has duplicated, but that is another story.
The deform parameter of the Bmesh from_object method is deprecated,
always assumed to be True, and will be removed in version 3.0.
That is because the cases where it is False don't work correctly and are
subject to memory leaks. One of the symptoms of the incorrect behavior
is the application of constructive modifiers twice if the input object
is an evaluated one, as demonstrated in D10053.
Reviewed By: Brecht
Differential Revision: https://developer.blender.org/D10086
Currently the grease pencil noise modifier seed value is under the randomize subpanel.
Moved the seed value outside of this panel because it doesn't only change the noise when using the randomize option. Moving the seed value prevents it from being hidden/greyed out so the user can manually keyframe it to control the noise animation.
Reviewed By: #grease_pencil, antoniov
Differential Revision: https://developer.blender.org/D10020
When the multiframe is enabled, playing animation must be disabled or the animation is not visible,
{F9527854}
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D9930
- Add missing Shift-Space for toggle maximize area.
- Add missing Alt-F10 for toggle fullscreen area.
- Match 2.7x keymap for setting the pivot center.
When activating add-object from from a tweak event (default keymap),
the snap gizmo could snap to a new location while dragging.
Workaround this by re-calculating the snap position where the tweak
event starts.
Reported T57210#1077747
Mistake in 2771dfd563. The commit left the new editors operator registration
in `ed_util_ops.c`, but removed the function call to it.
In other words, the ED-utils operators were not registered.
Mistake in 2771dfd563. The commit left the new editors operator registration
in `ed_util_ops.c`, but removed the function call to it.
In other words, the ED-utils operators were not registered.
The absolute position desktop mapping has been corrected. The correct
mapping is 0-65535 inclusive. Additionally, division by the virtual
desktop width and height needed to be subtracted by 1 as width and
height are one more than the final pixel index.
{rB1d3b92bdeabc} disabled animating other properties of the socket default
values, like the "min" and "max" properties, as well as the "default_value"
of the "default_value". That naming confusion lead to the commit
inadvertently removing animation for the vector socket in RNA.
I checked that the other socket types don't have the same issue.
Use approximate geodesic distance computatiom that crosses through triangles
rather than only along edges. Using only edges would give artifacts already
on a simple grid.
Fixes T78752, T35590, T43393, T53602
Differential Revision: https://developer.blender.org/D10068
The green is still distinct from the more turquoise use for geometry, and
they are never used in the same node graph. The use of red makes sense, but
would need changes to other sockets and categories to set it apart well.
Ref T82689
The translate node moves every point in the geometry, and the scale
node multiplies the "scale" attribute of the input geometry by its input.
While these operations are already possible with the "Attribute" nodes,
these new nodes fit nicely with the nodes specifically for changing the
"rotation" attribute that already exist, and they provide a simpler way
to do the same thing.
Differential Revision: https://developer.blender.org/D10100
Partially reverts 2250b5cefe.
Removing the user count and fake user count icons was controversial (which was
expected) and there are a few further changes needed, that won't make it in
time for the release, see D9946.
While there is a design to bring back the user count and fake user indicators,
a new design idea was proposed that the UI team wants to follow. This came too
late for the 2.92 release, the new design is targeted at the 2.93 release now.
Meanwhile, UI team decision was to simply revert the design changes.
The new design is being worked on in https://developer.blender.org/T84669.
Note that this commit does not revert some internal changes done in
2250b5cefe. Namely the introduction of `ed_util_ops.c` and data-block
operators in there. These will still be needed in the new design.
This patch allows connecting wires for object and collection socket
types to the "Group Input" node, which exposes them to be adjusted
in the modifier.
Thanks to @angavrilov's recent work in rB8964c02348f6, it is now
possible to edit pointer IDProperties in the interface when they are
drawn with `uiItemPointerR`.
This patch is composed of a few changes:
- Add code to create pointer properties in the modifier settings for
object and collection sockets, and also to draw them in the UI.
- Also search through the modifier's `IDProperty` settings to find IDs
used by the modifier.
- Change the setting's UI layout to support the change.
Differential Revision: https://developer.blender.org/D10056
Fixed an issue that was causing the app icon to render with a
'plated' background color in the taskbar and other areas of Windows.
Updated all app icons in Microsoft Store package to match Microsoft's
design recommendations.
Added multiple scales for app icons for high resolution displays.
Added high contrast app icons.
Reviewed By: pablovazquez, jmonteath
Maniphest Tasks: T79356
Differential Revision: https://developer.blender.org/D9681
Fixed an issue that was causing the app icon to render with a
'plated' background color in the taskbar and other areas of Windows.
Updated all app icons in Microsoft Store package to match Microsoft's
design recommendations.
Added multiple scales for app icons for high resolution displays.
Added high contrast app icons.
Reviewed By: pablovazquez, jmonteath
Maniphest Tasks: T79356
Differential Revision: https://developer.blender.org/D9681
This greatly simplifies the Point Distribute node. For a poisson disk
distribution, it now uses a simpler dart throwing variant. This results
in a slightly lower quality poisson disk distribution, but it still
fulfills our requirements: have a max density, minimum distance input
and stability while painting the density attribute.
This new implementation has a number of benefits over the old one:
* Much less and more readable code.
* Easier to extend with other distribution algorithms.
* Easier to transfer more attributes to the generated points later on.
* More predictable output when changing the max density and min distance.
* Works in 3d, so no projection on the xy plane is necessary.
This is related to T84640.
Differential Revision: https://developer.blender.org/D10104
This change removes copy-on-write operations from ID nodes which do not
need copy-on-write.
Should be no functional changes, as before the copy-on-write operation
would do nothing for those nodes anyway.
Building IDs which are not covered by copy-on-write process was not
implemented, which was causing parameters block not present, and, hence
causing crashes in areas which expected parameters to present.
First part of this change is related on making it so Copy-on-Write is
optional for ID nodes in the dependency graph.
Second part is related on using a generic builder for all ID types
which were not covered by Copy-on-Write before.
The final part is related on making it so build_id() is properly
handling ParticleSettings and Grease Pencil Data. Before they were not
covered there at all, and they need special handling because they do
have own build functions.
Not sure it worth trying to split those parts, as they are related to
each other and are not really possible to be tested standalone. Open
for a second opinion though.
Possible nut-tightening is to re-organize build_id() function so
that every branch does return and have an assert at the end, so that
missing ID type in the switch statement is easier to spot even when
using compilers which do not report missing switch cases.
As for question "why not use default" the answer is: to make it more
explicit and clear what is a decision when adding new ID types. We do
not want to quietly fall-back to a non-copy-on-write case for a newly
added ID types.
Differential Revision: https://developer.blender.org/D10075
There should be a conversion to native pixel size as expected by GHOST at the
window manager level, the dimensions at screen level do not need a conversion.
Differential Revision: https://developer.blender.org/D9976
Currently it is not possible to edit bare IDProperty pointer
values which are not explicitly defined through python via
UI fields. This is likely mostly because, unlike numeric values,
pointers aren't marked PROP_EDITABLE by default. However there
are also some bugs in the RNA code that need fixing.
The Geometry Nodes modifier uses bare properties to store
input settings for the node group it wraps, so supporting
Object and Collection sockets requires editable pointers.
This patch marks bare IDProperties editable, and ensures
that changing ID pointers rebuilds the dependency graph.
A type check is needed because an IDPROPERTY PointerPropertyRNA
can actually wrap a group value rather than an ID pointer.
Making pointers editable is not likely to accidentally
affect UI fields that were not intended to be editable,
because a simple `layout.prop` cannot determine which
datablocks to display in the menu and remains read-only.
The PROP_NEVER_UNLINK flag is also removed: it seems it
was added because the edit field that couldn't produce
a menu to set the pointer used to still display the unlink
button, but that seems not to be the case anymore.
Actual support for Object & Collection inputs in the modifier
is added in D10056, which can be used to test this code.
Differential Revision: https://developer.blender.org/D10098
The rna_idproperty_check call should be done before accessing
the prop pointer so that it can detect IDProperty values and
replace them with the actual PointerPropertyRNA object.
Ref D10098
The Asset Browser will be disabled and not available for the 2.92 release. In
alpha/beta builds, there will be an "Asset Browser" option under Preferences >
Experimental, if the developer extras are enabled.
Note that this also disables related UI elements (e.g. "Mark Asset" buttons,
Preferences settings for asset libraries, etc.).
The code is still in master of course, development and testing will continue
there. But there simply needs to be too much polishing and fixing before the
2.92 release, plus there are some design decisions to be reevaluated.
Check the milestone 1 project to follow ongoing work:
https://developer.blender.org/project/view/124/
This commit adds the "Save as Render" feature to the file output node,
that allows to disable the application of the configured view transform
and other color management settings on the image. If disable it uses
the standard view transform instead. This feature was originally
suggested in T83842 and is part of the color management improvements
task in T68926. With this feature it is possible to toggle the
application of the color management settings for each input socket
of the File Output node individually.
Reviewed By: brecht
Maniphest Tasks: T68926, T83842
Differential Revision: https://developer.blender.org/D9921
"F-Curve Visibility" is a bad UI label for a property that only affects
the display of unselected F-Curves. This commit clarifies the property
name by making it more specific with the word "Unselected", and by using
the word "Opacity". "F-Curve" is redundant in the UI label anyway because
it is included in the panel title.
Resolves T82587
Differential Revision: https://developer.blender.org/D10027
This right click select post outlines the reasons to make "Angle" the
default limit method: https://blender.community/c/rightclickselect/BVfbbc/
In short: Beveling every single edge rather than just sharp edges is
rarely the desired behavior, and the placement of the property in the UI
makes it easy to see the property's importance and toggle it.
Differential Revision: https://developer.blender.org/D8961
In order to avoid losing information, it sometimes makes sense for the
output attribute type to depend on the types of the input attributes.
Such a function already exists, `attribute_data_type_highest_complexity`,
it just needs to be used in a few more places. The change for the attribute
compare node is just so the code there uses the same code style as in the
attribute mix node.
Addresses part of T83793
Differential Revision: https://developer.blender.org/D10099
- Add operators that previously could only be found in panels
- Re order menus to match other menus
- Organize Code
|Before|After|
|{F9493583}|{F9493584}|
|{F9493585}|{F9493586}|
|{F9493588}|{F9493590}|
|{F9493591}|{F9493592}|
Reviewed By: sergey, sebastian_k, #motion_tracking
Differential Revision: https://developer.blender.org/D9781
The root of the issue was caused by the dependency graph using ID pointer
to map evaluated state from old depsgraph to new one upon relations update.
This was failing when IDs were re-allocated rapidly: was possible that
Object ID's evaluated state assigned to Mesh and vice versa.
Now depsgraph uses Session UUID to identify which IDs to restore evaluated
state to. The session UUID is stored in the IDNode, so that id_orig is not
dereferenced on depsgraph update since the ID might be freed.
The root of the issue is identified by Campbell, original patch was done
by Bastien, thanks! Also thanks to Oliver and Ray and everyone else for
testing!
This change will try to add meta data when using a multilayered open
exr file output node in the compositor. It adds the current scene meta
data and converts existing cryptomatte keys so it follows the
naming that is configured in the file output node.
This change supports the basic use-case where the compositor is
used to output cryptomatte layers with a different naming scheme to
support external compositors. In this case the Multilayered OpenEXR
files are used and the meta data is read from the render result.
Meta data is found when render layer node is connected with the
file output node without any other nodes in between. Redirects and empty
node groups are allowed.
The patch has been verified to work with external compositors.
See https://devtalk.blender.org/t/making-sense-of-cryptomatte-usage-in-third-party-programs/16576/17
See patch for example files.
Reviewed By: Sergey Sharybin
Differential Revision: https://developer.blender.org/D10016
Fix keyframe properties not being editable when animating a
library-overridden datablock.
The problem was that RNA pointers were created based on the datablock
affected by the animation (for example an Object), instead of the
datablock that contains the FCurve itself (the Action). The latter can
be local to the current blend file and should thus be editable, even
when the former is not.
Reviewed By: mont29
Maniphest Tasks: T81965
Differential Revision: https://developer.blender.org/D10091
Without this, additional items could be added in the future
which wouldn't be included in the check.
Move the check out of the loop since this is such an unlikely
situation that checking every iteration isn't needed.
Also remove redundant casts.
This adds a new Align Rotation to Vector node based on the mockup
in T83669.
Reviewers: HooglyBoogly, simonthommes
Differential Revision: https://developer.blender.org/D10081
Previously, the span returned by `WriteAttribute`s might not contain the
current value of the attribute for performance reasons. To avoid some
bugs, the span now always contains the old values (they might have to
be copied over from the internal storage, dependending on how the
attribute is stored).
The old behavior is still available with the `get_span_for_write_only`
method. The span that it returns might not contain the current
attribute values. Therefore, it should only be used when you want
to overwrite an attribute without looking at the old values.
When painting using Auto-Normalize or Lock Relative with some
groups locked, the locked weights may not add up precisely to
1 because of precision limitations, which results in creating
nonzero weights close to FLT_EPSILON. With Lock Relative display
mode this is very obvious and annoying (random red points amid
black or blue), so add an epsilon check to consider less than
1e-6 unlocked weight to be the same as 0.
In addition, in cases when no weight can be painted due to locks,
don't create vertex group entries at all if they don't exist yet.
Also, don't run Auto Normalize when not painting a deform group.
Differential Revision: https://developer.blender.org/D10000
The function `rna_Particle_uv_on_emitter` did not handle the case where
`particle->num_dmcache` was `DMCACHE_ISCHILD`. This resulted in an
incorrect offset for the `mtface` pointer. The commit checks for the
case and sets the offset accordingly, similar to existing code in
e.g. `particle_calculate_parent_uvs`.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10072
The Bmesh from_object method applies modifiers twice when the input
deform is enabled and the input depsgraph is a render one.
The evaluated object already have modifiers applied, and
mesh_create_eval_final() applies modifiers again. To fix this, the
BKE_mesh_new_from_object() function is used instead.
Reviewed By: Brecht
Differential Revision: https://developer.blender.org/D10053
* Simplify and clarify logic in `BKE_undosys_step_undo/redo_with_data_ex`,
by adding early return on invalid situations, renaming some variables,
and adding comments.
* Add more sanity checks in those functions.
No behavioral change are expected here, besides in potential edge-case,
invalid situations.
This is a preliminary change, before some deeper modifications of
`BKE_undosys` undo/redo API.
Differential Revision: https://developer.blender.org/D10033
This means that NVIDIA driver version 450 or newer is now required for Cycles
OptiX rendering. This upgrade is required to take advantage of new features and
improvements.
Ref T81431
The Surface -> Nurbs Curve behaves now like the Curve -> Nurbs Curve,
if you initially select less than all points. So, multiple points can
be selected and extruded which just moves the selected points similar
to Curve -> Nurbs Curve object.
Differential Revision: https://developer.blender.org/D9934
linked obdata) fail
Caused by rB1a650fdcb286.
Above commit made polling more restricitive in that it did not allow for
actions on material slots (linked to object, not object data) on objects
with liked object data. This should be allowed though.
Maniphest Tasks: T84593
https://developer.blender.org/D10078
None of these changes should be visible, but the files were somehow
out of sync with the blend file, so they need to be updated to reflect
those changes.
In my testing this works, but it requires me to remove the min(start_sample...) part in the
adaptive sampling kernel, and I assume there's a reason why it was there?
Reviewed By: brecht
Maniphest Tasks: T82351
Differential Revision: https://developer.blender.org/D9445
Also send mouse move event instead of moving cursor via SetCursorPos.
SetCursorPos did not reliably move the mouse when it is leaving the
window quickly.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D9981
This patch implements the same operations and interface as the regular
vector math node, but it runs for every element of the attribute. This
should expand what's possible with geometry nodes quite a bit.
Differential Revision: https://developer.blender.org/D9914
This patch makes the point distribute node write to the "rotation"
attribute with the normal of each face at each distributed point.
The "normal" attribute is also created with the triangle normal
at each point.
The conversion from the triangle normal to an Euler rotation is somewhat
arbitrary, since we only have one direction vector. For a more flexible
rotation for each point, the "Align Rotation to Vector" node can be used
in the future.
Differential Revision: https://developer.blender.org/D9965
Root of the issue is that `BKE_object_eval_boundbox` (that ports back
evaluated bbox to orig object during active depsgraph evaluation) is
only called when object's geometry actually is evaluated.
However, with new undo, often Object itself can be changed by undo,
without requiring its geometry to be re-evaluated, which was leading to
the evaluated bbox not being copied back into orig object anymore.
Fixing that by moving bbox copying-to-orig code into
`BKE_object_sync_to_original` instead, which is always executed when
object is evaluated (as hinted by the comment above
`BKE_object_eval_boundbox` actually).
Also allows to cleanup code for armature eval, apparently.
Maniphest Tasks: T83422
Differential Revision: https://developer.blender.org/D9789
This can be useful as a workaround on the boundary with the pinned
vertices in some situations among other things, and completely copies
the existing design of the self collision vertex group setting.
Differential Revision: https://developer.blender.org/D10043
The `object.collision.use` flag was treated as a redundant marker
of the existence of the modifier, going as far as adding/removing
it when the value was changed, which is not actually very useful.
Removing the modifier loses its position in the stack, and requires
a dependency graph rebuild. It feels it may be a legacy flag?
What would be useful however is the ability to toggle collisions
dynamically without removing the modifier. This patch adjusts the
code to keep the modifier when the flag is disabled, and add it
if it doesn't exist when the flag is enabled. The modifier now
checks the flag at the start and quickly exits after cleaning
up stale data. The redesigned setting is exposed in the UI.
Collisions can't be disabled by simply using the modifier enable
flags because the modifier merely saves a snapshot of the mesh at
a certain point of the modifier stack for other objects to use,
and thus has to be able to clear the stale data.
Differential Revision: https://developer.blender.org/D10064
Handle return value of `fread()` by printing an error and closing the
file when it cannot be read from. Not only is error handing a good idea,
it also prevents GCC from warning that the return value of `fread()`
should not be ignored:
```
.../blender/source/blender/imbuf/intern/indexer.c: In function ‘IMB_indexer_open’:
.../blender/source/blender/imbuf/intern/indexer.c:201:5: warning: ignoring return value of ‘fread’, declared with attribute warn_unused_result [-Wunused-result]
201 | fread(&idx->entries[i].frameno, sizeof(int), 1, fp);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.../blender/source/blender/imbuf/intern/indexer.c:202:5: warning: ignoring return value of ‘fread’, declared with attribute warn_unused_result [-Wunused-result]
202 | fread(&idx->entries[i].seek_pos, sizeof(unsigned long long), 1, fp);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.../blender/source/blender/imbuf/intern/indexer.c:203:5: warning: ignoring return value of ‘fread’, declared with attribute warn_unused_result [-Wunused-result]
203 | fread(&idx->entries[i].seek_pos_dts, sizeof(unsigned long long), 1, fp);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.../blender/source/blender/imbuf/intern/indexer.c:204:5: warning: ignoring return value of ‘fread’, declared with attribute warn_unused_result [-Wunused-result]
204 | fread(&idx->entries[i].pts, sizeof(unsigned long long), 1, fp);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
```
Differential Revision: https://developer.blender.org/D9916
Reviewed by: campbellbarton
Previous code would not generate a session uuid for embedded IDs (like
root node trees or master collections). While this is not a problem
currently since those are not directly stored in Main data-base, this is
conceptually wrong, since those IDs still pertain the Main data.
Further more, this is blocking using `session_uuid` more in depsgraph in
place from ID pointer itself, as identifier (related to T84397).
No ID (even remotely) related to Main database should ever be created
directly through MEM_mallocN. Using `BKE_libblock_alloc` is the bare
minimum.
Note that there is no behavior change expected here.
Selecting vertices and faces first checked edge selection,
this was called to set vert1 & vert2 variables which have since been
removed.
These calls should have been removed in
51f04bf7b8.
Exposed by recent commit 246efd7286
Although this was an existing logical error causing
`uv_find_nearest_face` to only work properly when the hit distance was
initialized to FLT_MAX, which wasn't the case in multi-object edit mode.
If a node was closed in the hierarchy, we would only copy that node,
even if child nodes were selected.
Reviewed By: brecht, mont29
Maniphest Tasks: T84327
Differential Revision: https://developer.blender.org/D9995
Previously raw images were not cached if image wasn't preprocessed.
This caused issue, that image had to be read from disk on every redraw.
Effect strips must be excluded, because this would cause problem with
invalidation. Effect strips can use preprocessing however. This is
mainly to allow usimg modifiers on them.
This change should follow rBf448ff2afe7a77, but I have wrongly assumed,
that it has been implemented already.
ref T80278
Group all tests of a test suite into a single test command invocation.
This reduces the number of invocations by `ctest` by an order of
magnitude.
Since rB56aa5b0d8c6b663, `bin/tests/blender_test` was run for every
individual test. Having over a 1000 tests made testing slower than
necessary. Individual tests can still be run if desired by invocation of
`bin/tests/blender_test --gtest_filter=suitename.testname`.
NOTE: For this commit to have an immediate effect, it may be necessary
to remove the `tests` and `Testing` directories and some CMake files
from your build directory and rebuild. Run `ctest -N` to see the list of
tests; there should be less than 200.
Reviewed By: sergey, LazyDodo, sebbas
Maniphest Tasks: T83222
Differential Revision: https://developer.blender.org/D9649
The issue is that the "Noisy Image" pass is added even though it should not.
`use_denoising` has to be enabled on the scene and on the view layer
to actually enable it.
Differential Revision: https://developer.blender.org/D10048
Reviewers: lukasstockner97, brecht
This is part two of the fix for T84459.
Issue appears to be caused by AMD graphics driver later than 20.11.1 and
affects older GPUs (Polaris/FIJI cards). Drawing normals in edit mode
uses the same OpenGL data type for storing normals that is known to be
faulty.
This change fixes the face dot normals by using GPU_COMP_I16.
Issue appears to be caused by AMD graphics driver later than 20.11.1 and
affects older GPUs (Polaris/FIJI cards). Wireframe drawing uses the same
OpenGL data type for storing normals what is known to be faulty.
This patch enabled storing the normals using GPU_COMP_I16. It also
solves the normals drawing in edit mode for vertex and loop normals.
The start of the text was stepped over without subtracting it's length
(introduced in fad80a95fd).
Replace this logic with BLI_string_join_array to simplify construction.
Multiple Wintab tablets do not send relative button state when
configured to do so. This causes button events to be delayed until
processed as Win32 button events.
This commit fixes the issue by configuring Wintab to use absolute
button state and tracking changes manually.
The incremental snap was always operating in the local space, which in most
cases is the VIEW type orientation.
Use only local space when the operation is affected by constraint.
Differential Revision: https://developer.blender.org/D10052
This commit replaces the two-column list for editing node group inputs
and outputs with a cleaner solution with two panels. The new layout
has several benefits:
- It uses the vertical space in the node editor sidebar better.
- It should be more familiar because of similarity with other UI lists.
- It should look better with consistent alignment and icons.
Note that displaying the "Name" property outside of the list itself is
a bit inconsistent and could possibly be removed in the future.
Differential Revision: https://developer.blender.org/D9683
If scene strip has no scene assigned, leave source string empty.
Same goes for all other strips, that use ID datablocks.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D10058
Error handling added in 512a23c3d6 caused that reading header of new
file failed, since it is empty.
Don't attempt to read header if file is empty. If header can not be read
anyway, try to delete the file. Add asserts, as this should never
happen.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D9954
This property was intended to affect fit method for added strips prior
to running operator. However UI team did not agree with current
implementation.
ref T84535
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D10055
All eevee scene properties are not animatable due to
`RNA_define_animate_sdna(false)` so there is no need for an animation
decorator here (would not show anyways).
Not sure if setting use_property_decorate to False and then manually
adding one again was a hack in rB7fc60bff14a6 to get the alignment
right, but seems to work good now without it.
Note: there also seems to be an inconsistency here generally:
- Eevee reserves room for an animation decorator in almost every panel
(except for "Sampling" and "Indirect Lighting") even though almost none
are animatable (except for stuff in "Hair" and "Film"). This looks nice
if multiple panels are expanded (except for mentioned "Sampling" and
"Indirect Lighting" -- maybe these should also reserve the room?)
- Cycles does not use animation decorators at all (even though pretty
much everything is animatable here -- maybe these should also use
animation decorators?)
- Then there is also the 'shared' "Grease Pencil", "Freestyle" and
"Colormanagement" -- these dont use animation decorators, but some stuff
is animatable...
Regarding the note: not sure what the guidelines here are, if this is
isolated to each panel then there is lots of stuff for eevee that could
set use_property_decorate to False, if multiple open panels are
considered (for nice visual consistency between them), then there is
romm for improvement elsewhere, too.
Maniphest Tasks: T81411
Differential Revision: https://developer.blender.org/D9164
The "repeat" property was turned off by default in rBf5080c82dd91, but
it's important to have repeat turned on for this operator since it can be
used to fill large areas. This commit is similar to rBaa77689f77b4.
Fixes T84531
The nodes were selected in new node groups because they are by default,
but there's no particular reason for them to be selected, and it can
be distracting.
Adding the modifier itself already adds a new node tree, which is
then displayed in the node editor because of the active object and
active modifier context. So there's no need to create the node tree
in the python code in this case.
Previously, it was only forbidden to delete the last scene. This can
lead to the situation where a .blend file only contains linked scenes.
This is problematic, because linked data might not always be available
or can be removed from a .blend file without having an additional check
for remaining scenes.
Now there always has to be at least one local scene.
Reviewers: mont29
Differential Revision: https://developer.blender.org/D10049
The pointer allocated to the `TransData` was being incorrectly incremented,
causing misalignment and consequently `heap-buffer-overflow`.
Because of this, `TD_NOTCONNECTED` was being set in a strange way that did
not correspond to other types of `TransData`.
The solution is to not increment the `TransData` pointer and set
`TD_NOTCONNECTED` only for "unconnected" segments.
The code was also a bit deduplicated.
The command line syntax for Inkscape changed quite a bit for the 1.0 release,
see https://wiki.inkscape.org/wiki/index.php/Release_notes/1.0#Command_Line.
Think it's reasonable to expect Inkscape 1.0 or later be installed if you want
to generate the icons with the script. It's easy to get via the website, if the
distribution doesn't provide new enough packages. Only few people would use the
script anyway.
I also had to change the path for command line access on macOS which apparently
changed (https://stackoverflow.com/a/60068607). Although I didn't find a
mention of this change in the Inkscape release notes.
Commit d259e7dcfb increased the instance limit, but only provided
a fall back for the host code for older OptiX SDKs, not for kernel code. This caused a mismatch when
an old SDK was used (as is currently the case on buildbot) and subsequent rendering artifacts. This
fixes that by moving the bit that is checked to a common location that works with both old an new
SDK versions.
Was reported for meshes, but was true for any type.
Now add appropriate notifier to refresh the Outliner.
Maniphest Tasks: T84475
Differential Revision: https://developer.blender.org/D10030
This was reported for the Triangulate geometry node, but was also true
for the triangulate modifier and in exporters.
Note the modifier was introduced with "Ngon Method" in rBa7b44c82e5b9 but
was renamed to "Polygon Method" in rBf4762eb12ba5.
Since quads are also polygons (and quads have their own method), the
term "N-gon" is more appropriate here and is also described in the
glossary https://docs.blender.org/manual/en/2.92/glossary/
index.html#term-N-gon
Docs have been updated in rBM7539 (partially - the method would also
have to be renamed once this patch lands).
Note this also fixes the wrong enum used for the alembic exporter.
Fixes T83907
Maniphest Tasks: T83907
Differential Revision: https://developer.blender.org/D10022
Currently such triangles are effectively already excluded, because
the calculated forces are not applied to pinned vertices. However
these forces are still being computed, which is inefficient.
This adds an early check for triangles where all vertices are
pinned during BVH overlap detection, which significantly speeds
up certain use cases with big fully pinned areas that happen to
overlap a collider. In case of self collision both triangles must
be fully pinned to exclude safely, because the computation is
symmetric and handles two triangles at the same time.
Differential Revision: https://developer.blender.org/D10041
Using malloc to allocate a temporary array for each vertex,
which most commonly contains just 4 elements, is not efficient.
Checking the mode with a switch is also better.
Differential Revision: https://developer.blender.org/D10040
Linux does not report the driver version. It does report the OpenGL
version. This change will check the OpenGL version to enable the HQ
normal work around.
Adjust default cache settings for all files to store raw and final
images.
All settings are still available when developer extras option is
enabled in user preferences.
This is part of design task T80278
Differential Revision: https://developer.blender.org/D9745
The cause for this was quite simple-- a misplaced bitwise operation
before passing a value to the function that grayed out buttons based on
their state, caused by refactoring in rB933bf62a611f before committing.
What makes the situation a little more confusing is that the theme colors
are overridden for list buttons in UI lists, necessitating a second
call to `ui_widget_color_disabled()`. Ideally that wouldn't be necessary.
For a while now OptiX had support for 28-bits of instance IDs, instead of the initial 24-bits (see also
value reported by OPTIX_DEVICE_PROPERTY_LIMIT_MAX_INSTANCE_ID). This change makes use of
that and also adds an error reported when the number of instances an OptiX acceleration structure is
created with goes beyond the limit, to make this clear instead of just rendering an image with artifacts.
Manifest Tasks: T81431
There is no need to first copy weights to a separate array,
or create the data layer if it doesn't exist. The threaded
code can retrieve the weight directly from the layer.
Differential Revision: https://developer.blender.org/D10015
While using the Sample Weight tool in Weight Paint mode, user eyedropper mouse cursor.
Differential Revision: https://developer.blender.org/D9431
Reviewed by Pablo Vazquez
While using the Sample Weight tool in Weight Paint mode, show weight value in tool header.
Differential Revision: https://developer.blender.org/D9432
Reviewed by Pablo Vazquez
Instances are created with an "index" parameter used for persistence over
time through animation. Currently the geometry nodes instancer passes
the index in the array for this value, but the arrays created by the
"Point Distribution" node aren't necessarily stable in this way when
the input mesh is deformed. In D9832 we already mostly solved this
problem with an `id` attribute. The solution here is to create instances
with this attribute as well.
It's important to note that deforming the instanced points *after*
distribution will usually be a better solution for this problem. This
solution is likely still important though.
Differential Revision: https://developer.blender.org/D10024
The hair mirroring code seems to expect that hair is emitted from faces.
The PE_mirror_x contains the following expression: mirrorfaces[pa->num * 2].
This only makes sense when pa->num is a face index.
The simplest short term solution is to disable the mirror operator when
the particles haven't been emitted from faces.
Diffferential Revision: https://developer.blender.org/D10002
Changing which node group a group node references needs a depsgraph
relations update in some cases.
Differential Revision: https://developer.blender.org/D10018
- Use the name "Point Cloud" instead of "Pointcloud"
- Fix a typo in UV_OT_smart_project.
- Use the name "Install Light" to for the installation
operator for MatCaps, HDRIs, and Studio Lights.
Fixes T83585, T65291, and T54921
Differential Revision: https://developer.blender.org/D9867
BPY_context_dict_clear_members_array used PyDict_DelItemString
which raised & cleared the exception when the key didn't exist.
Even though setting/clearing the exception is supported,
it's worth avoiding where possible as it adds some overhead as well as
overwriting the previous error which can free PyObject's which are
unrelated to the code being executed.
Possible fix for T82552, crashing on Windows when setting the exception.
Since the introduction in rB2221389d6e8e, baking to vertex colors would
still check for the existence of a valid UVMap (as if baking to image
textures).
Now check for vertex colors instead if target is
R_BAKE_TARGET_VERTEX_COLORS.
Maniphest Tasks: T84416
Differential Revision: https://developer.blender.org/D10006
Since there is a specific icon to represent the 3D cursor it makes sense
to add it to the RNA struct. This struct's icon is only displayed in the
Data API section of the outliner.
When using "Make Links"->"Materials" regular materials could be linked
onto grease pencil objects. This caused a number of issues.
The fix changes the `allow_make_links_data` function to make sure that
if one object is of type `OB_GPENCIL`, the other has to be aswell.
Reviewed By: antoniov
Maniphest Tasks: T84420
Differential Revision: https://developer.blender.org/D10014
'Caused'/revealed by rBd29a720c45e5: Operators that fully re-create the
mesh would previously rely on `sculpt_update_object` called from update
code to get required sculpt-specific data layers re-added to the new
mesh.
Now instead put all code adding data to orig mesh for sculpt purpose
into a new util function (`BKE_sculpt_ensure_orig_mesh_data`), and call
that function when entering sculpt mode, and from voxel remesher code.
This is contonuing effort to more clearly separate orig data from evaluated
data handling/usage in sculpt code.
TODO: there are likely other code paths that would need to call that
new function?
Reviewers: @sergey, @pablodp606
Subscribers:
Note that this is fairly fragile still, especially in cases like paint
cureve undo, which actually does not use context in most cases (and can
be called with a NULL context), but do need it in one case. This will
need a proper rework at some point.
Rename it to mark it is only for `encode` callbacks, fix `encode`
callback of text undo to early fail in case it gets a NULL context, add
an assert to `BKE_undosys_step_push_with_type` that context is not NULL
when undotype requires a valid one.
Note that in practice this should not change anything, currently it
seems that we always get a valid context in
`BKE_undosys_step_push_with_type`?
Steps to reproduce were:
* Drag object icon from the Outliner into the 3D view (or an object asset from
the Asset Browser)
* Open the "Adjust Last Operation" panel
* Edit options in there - the object would move to the mouse location
The same issue happens with collection instance and object data adding (e.g.
via drag & drop). This patch addresses them too.
The operator used the event state stored in the window. This shouldn't be
accessed from the operator execute callback generally which happened here.
Especially not if the operator supports editing properties.
confirmation
Deleting keyframes in the dopesheet or graph editor always required
confirmation, even if used ouside of the "Delete" menus.
Now add a "confirm" option [same as for deleting objects], which can be
disabled for immediate keyframe deletion.
This will also change the default behavior and bring this in line with
how object deletion works so there is one shortcut for bringing up the
menu/confirmation and another shortcut to delete immediately without
requiring confirmation / another click:
- Blender Default keymap: "X" for menu, "Del" for immediate
- Industry Compatible: "Backspace" for menu, "Del" for immediate
Maniphest Tasks: T70316
Differential Revision: https://developer.blender.org/D9651
The issue is that `UI_GetThemeColorBlendShade4fv()` creates a color
with alpha, but there is not any background underneath to blend in with.
The solution is just to draw an opaque background first, which also
halves the number of rects to draw. Note that the brighter rows get
very slightly darker after this change.
Differential Revision: https://developer.blender.org/D9947
This was caused when the BKE_pbvh_draw_cb function was used with
update_only_visible set to false. In that case, all nodes with the flag
were updating, but the update flag was only cleared for visible nodes.
This was causing constant updates per redraw in no visible nodes until
they enter the view frustum and their flag was cleared.
In order to fix this and prevent it from happening again:
- Updating the buffers, flushing the updates and clearing the flags are
now part of the same function. It does not make sense to do these in
separate places.
- The BKE_pbvh_draw_cb function was refactored so the
pbvh_update_draw_buffers is only called once. It should now be easier to
understand what the function does when it is used to update only visible
nodes or all nodes.
Reviewed By: mont29
Maniphest Tasks: T79146
Differential Revision: https://developer.blender.org/D9935
The issue can be simply resolved by moving the primitives and plus
icons slightly. They still bump up against the top and bottom of the
header but it looks much better now.
Rendering on the CPU uses the Embree BVH layout, whether the OptiX denoiser is enabled or not.
This means the "build_bvh" function gets a "BVHEmbree" object to fill and not a "BVHMulti" as it
was assuming before, which caused crashes due to memory geting overwritten incorrectly. This
fixes that by redirecting Embree BVH builds to the Embree device.
Manifest Tasks: T83925
Changing the geometry in the current scene caused the primitive offsets for all geometry to
change, but the values would not be updated in all bottom-level BVH structures. Rendering
artifacts and crashes where the result. This fixes that by ensuring all BVH structures are
updated when the primitive offsets change.
Since the introduction in rB4de7c0c3105a, the option is only used in the
compositor, it has no effect elsewhere [texture nodes, shader nodes].
Now only show the option for the compositor.
Maniphest Tasks: T84389
Differential Revision: https://developer.blender.org/D10005
{D9211} introduced pre-multiplying the color for the keying node. This
pre-multiplication should also be done by other keying nodes and should be
the default operation for alpha node.
This patch will change the logic of keying nodes (Cryptomatte Node,
Channel Matte, Chroma Matte, Color Matte, Difference Matte, Distance
Matte, Luminance Matte) and breaks old files.
The Set alpha node has a mode parameter. This parameter changes
the logic to `Apply Mask` the alpha on the RGBA channels of the input color
or only replace the alpha channel (old behavior).
The replace mode is automatically set for older files. When adding
new files the the multiply mode is set.
Reviewed By: Sergey Sharybin
Differential Revision: https://developer.blender.org/D9630
Exposed by rBeaa44afe703e.
Definition for CONSTRAINT_TYPE_NULL is not totally clear (it is set for
constraints without data, see an old comment from Ton), but for these, a
TypeInfo cannot be fetched.
Avoid processing those constraints in UI code, just do nothing instead.
Maniphest Tasks: T84367
Differential Revision: https://developer.blender.org/D9987
Stores cryptomatte hashes as meta data to the render result. Compositors could
use this for lookup on names in stead of hashes.
Differential Revision: https://developer.blender.org/D9553
The mask overlay wasn't part of the overlay engine. The reasoning nehind
this was that more editors used the mask overlay and most of them used
old drawing code. This patch adds the mask overlay drawing to the draw
overlay engine. This code path will only be used by the image editor
VSE, Compositor and Movie Clip editor will still use the previous
method.
During this patch some alternatives have been researched:
1. `ED_mask_draw_region`: this would lead to different code paths when
drawing in the image editor, and some hacks to retrieve the correct
framebuffer.
2. Add mask drawing to image engine: Would lead to incorrect color
management when viewing the mask.
3. Add mask drawing to image engine and overlay engine: Would lead to
duplicated code.
4. Add mask drawing to overlay engine and for combined overlay select
the correct framebuffer.
Option 4 was chosen as the exception (switching framebuffers) can be
done without hacks. The code stays clean.
Workspaces [FILTER_ID_WS] were in the `Environment` category
IDFilterBoolean, whereas they are in the `Miscellaneous` category in
`rna_def_fileselect_asset_params`.
Make this consistent ['Miscellaneous'] in both cases.
(note this was already done in rB2c317457cbf2 for the file browser case)
Spotted while looking into T83983.
Maniphest Tasks: T83983
Differential Revision: https://developer.blender.org/D9911
Use the BMesh symmetrize operator instead of using the modifier code.
While we could support shape-keys with the existing code used by the
mirror modifier, we'd need to add code-paths for evaluated mesh & bmesh
conversion to handle shape-keys differently just for this one case,
since we want to avoid copying & processing shape-keys layers for
evaluated meshes in general.
of islands in vertex mode if "UV Sync Selection" is on
Caused by rB72b422c1e101: UV: support select linked with sync-select in
vert/edge modes
If you had island selection mode enabled in the UV editor with UV Sync
Selection off, and switch UV Sync Selection on, then in vertex selection
mode all bulk selection ops (box, circle, lasso) will be selecting whole
islands.
Prior to culprit commit, for sync selection ON plus island selection ON,
BM_uv_vert_map_create would always return a NULL vmap (it was called
with `use_select` = True, no faces tagged selected). After said commit,
for sync selection ON plus island selection ON, BM_uv_vert_map_create
would return a valid vmap (it is now called with `use_select` = False,
no faces tagged selected - but if `use_select` is False, all UVs will be
added here).
If I am not mistaken, it is never wanted to actually select islands with
box/lasso/circle when sync selection is turned ON [after all you dont
have the UI for it showing], so solution is now to check for this
earlier and not even call uv_select_linked_multi in those cases. (Maybe
in the future this can be unified and we dont need separate selection
modes fo UV and 3D?)
Maniphest Tasks: T84018
Differential Revision: https://developer.blender.org/D9917
The property split layout was broken when the bone dialog appeared,
because the name field was not set. Theoretically property split should
work in this case, but it makes sense to use the label anyway.
In the report, the geometry is copied because it has two users and the
final join node needs to write to it. The join node also happens to
remove attributes apparently, because it exposed a mistake in the "copy"
method of the `MeshComponent` class. The copy is supposed to be
a deep copy, but the vertex group name map was not duplicated.
Differential Revision: https://developer.blender.org/D9991
If there was a control point at an extreme position when drawing a curve
profile (in the bottom corner), the fill's trianglulation could fail, giving
a misleading view of the curve. This is because the extra points added to
create a closed shape were exactly on the border of the view.
This commit adds a small margin to those points, so the triangulation
doesn't fail because the line overlaps itself.
Another possible solution is to use a different algorithm to fill
the polygon, such as scanfill, which is used by curve objects.
This seemed simpler, and seems to work fairly robustly.
Differential Revision: https://developer.blender.org/D9989
Since the `TransData` converted from vertices is the same used for other
transform modes (Move, Rotate, Resize), the logic used for mirroring
focused only on the position of the vertices.
The solution here is to create a specific `TansData` for `CD_MVERT_SKIN`.
When building opensubdiv with more aggressive optimization flags
(-march=native -02) the output meshes would differ a bit from what we
expected in the current automated modifier test file.
The differences in vertex position is within the 1e-6 range, which I
would call is acceptable for floats. In addition to this, all the
modifier test that tests the subdiv modifier in particular pass without
any modifications. I've updated two tests in the modifier test file and
script to make it pass (listed below).
Updated following test categories:
1. Decimate test
Here there was a subdiv modifier applied before the actual decimate
modifier. Because the decimate modifier creates a queue of potential
vertices it can remove, it is highly sensitive to even small changes as
it drastically changes in which order the vertices are decimated in.
As this test should only be testing the decimate modifier, I pre-applied
the subdiv modifier in the test file.
2. RandomCubeModifier
For these tests I removed the subdiv modifier as well. As with decimate,
a small change in vertex position here can lead to quite different
results.
Reviewed By: Sergey, Bastien
Differential Revision: http://developer.blender.org/D9004
This was introduced in rBe5c0d4613a8943c712b57fb336997ecd78e6508e.
The issue is that the new fluid system does not use the pointcache
system for caching anymore, but still relies on pointcache for
other things. For example, it uses DEG_add_collision_relations
which internally creates relations with pointcache. Not sure if
there are other issues.
Ideally, this dependence should be resolved in one way or another
at some point, but that is out of scope for this fix.
Differential Revision: https://developer.blender.org/D9984
Reviewers: brecht
When in edit mode, the edit lines for de-selected surfaces did not
show up.
The bug was caused by the is_gpencil bool which reused another flag.
Both grease pencil and nurbs surfaces use the edit_curve_handle shader.
A dedicated flag was added to make sure the is_gpencil bool is
set correctly.
Reviewed By: fclem
Maniphest Tasks: T84260
Differential Revision: https://developer.blender.org/D9985
Regression introduced by {c766d9b9dc56}. When converting the vertex
buffer to a texture buffer the fetch mode wasn't checked and the short
was bitwise interpreted as a float. This change checks the fetch_mode
and select the correct texture buffer.
This could also be added to other places when needed. At this time it is
only added here to support vertex colors when used with hair particles.
THe high quality normals work around is enabled for Polaris cards using
the official drivers. Since driver version 2.11.2 they fail to render
using low quality normals.
The detection of polaris cards is done by matching the opengl renderer.
The renderer strings have been extracted from various reports linked to
{T82856} but isn't complete as some reports are missing the exact
renderer as users don't always report via the help menu.
This change makes it possible for platforms to only support high quality
normal rendering. This is part of {T82856} where current AMD drivers
running on the polaris architecture does not support the low quality
setting due to a driver bug.
In a next commit the work around will be enabled.
This adds high quality normals for non meshes. These include
* Volumetric Object Wireframe
* Metaballs
* Extracted Curves
* Curves in edit mode
This is in preparation to fix a regression in recent AMD
drivers where the `GL_INT_2_10_10_10_REV` data type isn't
working in Polaris cards.
Since the introduction in 2c23bb8389,
these were set to 10000 each.
This seems like an arbitrary limit (BKE_image_scale / IMB_scaleImBuf
don't have limits and I couldn't spot similar size restrictions in
image relating functions), now match what we do for creating images
(rna_Main_images_new), use INT_MAX.
Ref D9950
While it's never NULL at the moment, checks elsewhere in this function
support passing in a NULL filename, so keep this working as intended
in case RNAProcessItem.filename is NULL in the future.
- Remove ternary operators when both values are the same.
- Remove break after return.
- Remove redundant NULL checks for code which handles
those cases immediately beforehand.
Steps to reproduce:
1. Add clip to clip editor
2. Open the tracking settings & tracking settings extra panels
To fix this the sub panel is only drawn if a track is active.
The main panel will exit early and display a "No active track" message.
This is consistent with other panels in the clip editor.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D9727
* This way you don't have to look up the function declaration to know what the
boolean value means.
* You can call the function in a loop over the available sizes and pass the
index as size.
* Makes it easier to add a new size in future if needed.
This value really is the opacity, or the alpha, since a value of 1.0 means
that the image is fully visible, not invisible like "full transparency"
would suggest. Mistake in rBea4d28aea0343a.
Differential Revision: https://developer.blender.org/D9920
This bug exposes some ugliness in the implementation in poisson disk
distribution implementation with likely incorrect resizing of vectors and
some other assumptions. However, a simple quick fix is to return early
when the input mesh has no faces. This makes sense anyway because
there is no surface to scatter on.
This adds a basic set of tests for curve sampling and bevel generation.
At the moment there are basic test cases for bevels, caps, and the
filling of 2D curves, but more tests can be added in the future.
Curves are actually converted to "DispLists" for displaying them in the
viewport, so it's much simpler to rely on the mesh conversion operator
instead of building a new test framework for another data structure.
Differential Revision: https://developer.blender.org/D9958
By design, there should be lines between the alternating horizontal
stripes in the Sequencer. But currently they are all drawn in one place,
on top of each other. Mistake in rBfae895125efe.
Differential Revision: https://developer.blender.org/D9962
It is perfectly 'valid' to find invalid RNA properties references in
override properties list. Data change, RNA changes, IDProperties change,
some linked ID may become unavailable, etc.
Note that those invaldi override properties are cleaned up when updating
the override info (so typically on undo step storage, and .blend file save).
New UUID was generated for original strip not new one.
Bug caused "invisible" sound strip playing that is impossible to
remove. Especially noticable when transforming pasted strips. In such
case, file reload was necessary.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D9912
Looks like this has been wrong since the introduction in rB5505697ac508
10 years ago.
To get the proper texture lookup in the mirrored area, first rotate, then
translate/flip [instead of the other way around].
Maniphest Tasks: T83439
Differential Revision: https://developer.blender.org/D9897
Try to detect if a given image may have valid alpha data or not (based
on number of channels and depth). This may be a bit doggy in theory, but
in practice it should cover most fields as expected. We can always
adjust the euristic here in other wrong cases appear.
This will affect all import add-ons using that node shader wrapper (at
least OBJ and FBX ones).
Modifies WM_BUTTON processing to reuse existing mousemove logic. Fixes
case where cursor wrap was not being handled on mouse release.
Bonus: flattened mouse move logic so all paths lead to a single return.
Removed case where wrap is not handled until subsequent mousemove as
button press may rely on updated mouse move position.
The transform code did not provide a 2d context to be used in 3d space.
The solution is to set all matrices for the screen space in these cases.
This commit also removes the dial3d drawing in these cases.
It was not correct anyway.
These two operators (one for grease pencil, one for other objects)
copy a single modifier from the active object to all selected objects.
The operators are exposed in the dropdown menus in modifier headers.
Note that It's currently possible to drag and drop modifiers between
objects in the outliner, but that only works for dragging to one object
at a time. Modifiers can also be copied with the "Make Links" operator,
but that copies *all* modifiers rather than just one. The placement
and scope of these new operators allow for more useful poll messages
and error messages as well.
Every object type that supports modifiers is supported. Although hook
and collision modifiers aren't supported because of an unexplained
comment in `BKE_object_copy_modifier`, other than that, every modifier
type is supported, including particle systems, nodes modifiers, etc.
The new modifiers are set active, which required two small tweaks to
`object.c` and `particle.c`.
Reviewed By: Hans Goudey (with additional edits)
Differential Revision: https://developer.blender.org/D9537
We have to check that the RNAProperty found in `rna_idp_path` from the
currently checked IDProperty name is actually a real runtime RNA-defined
one, and not a static C-defined RNAProperty...
Reported as a strict compiler warning, and the need of fall-through is
not needed from just reading the code.
If it is something what must happen, the reasoning is to be explained
in the comment, and ATTR_FALLTHROUGH is to be used.
Having a centeral place to find a list of all library overrides should be
useful for managing production scenes where library overrides are used a lot.
This change adds the individually overridden properties of a data-block under
the data-block itself. Just how we show modifiers, constraints or pose channels
there. This way we can also expose library override operations/options better
in future.
There's also a filter option for the library overrides now, so they can be
hidden. It is only available in the View Layer display mode though, like the
other filter options.
One internal change this has to do is adding more informative return values to
undo pushes and the library override functions called by it. That way we can
send a notifier when library overrides change for the Outliner to know when to
rebuild the tree.
Differential Revision: https://developer.blender.org/D7631
Reviewed by: Andy Goralczyk, Bastien Montagne, William Reynish
In some operators that previously allowed duplicating the selected data-block,
the operator would not be available now. 2250b5cefe split the "new" operators
into "new" and "delete" to allow clearly differentiating between the two. But I
apparently didn't amend all affected data-block selectors to use the added
"duplicate" operators.
I went over all operators that were split now and made sure all affected
data-block selectors are updated.
Steps to reproduce were:
* Start with factory defaults
* Set "Render in" to "Maximized Area"
* Render
* Open "Save as"
* Click Cancel
Mistake in 78d2ce19c4. Was using the wrong area pointer, which I think
didn't make a difference in most cases, but here it did.
Previously Wintab packets were added to a local queue to be processed
during Win32 mouse events, in order to correlate Wintab to Win32
mouse buttons. Wintab packets before Win32 mouse down events were
expired on a timer.
This commit drives mouse events during Wintab events when a device is
in range. When a Wintab button is found it is dispatched if an
equivalent event can be popped from the Win32 event queue. If a Win32
mouse button event is not associated with a Wintab event, it falls
through to WM_BUTTON handling. All Wintab packets are handled as they
are received.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D9908
Approximately 138 changes in the spelling of compound words
and proper names like "Light Probe", "Shrink/Fatten", "Face Map".
In many cases, hyphens were used where they aren't correct, like
"re-fit". Other common changes include:
- "Datablock" -> "data-block"
- "Floating point" -> "floating-point"
- "Ngons" -> "n-gons"
These changes help give the language used in the interface
a consistent, more professional feel.
Differential Revision: https://developer.blender.org/D9923
Approximately 195 changes of capitalization to conform to MLA title style.
UI labels and property names should use MLA title case, while descriptions
should be capitalized like regular prose, generally with only the start of
a sentence capitalized.
Differential Revision: https://developer.blender.org/D9922
This is relatively expensive and as per the OSL spec, this value is not
expected to be meaningful for non-light shaders. This makes viewport updates
a little faster.
As a side effect also fixes T82723, viewport refresh issue with volume density.
In the Bake > Output panel, there is now a choice between Image Textures and
Vertex Colors. The active vertex color layer is used for baking. This works
with both existing per-corner and sculpt per-vertex vertex colors.
Split of internal/external image bake target code off into smaller functions and
refactor associated data structures for clarity. Designed so that a vertex color
bake target is easy to fit in.
Also avoid passing in a huge number of arguments into the main baking function,
pass a struct instead.
The issue was that sounds were always faded from 0 volume when they
started and depending on the currently used buffer size, the fading took
longer or shorter.
The solution stores whether the sound has ever been played back and
consequently does not fade when starting to play back.
This node updates the "rotation" attribute on points.
Multiple ways to specify the rotation are supported.
Differential Revision: https://developer.blender.org/D9883
Ref T83668.
Disclaimer: This workaround avoids crashing with current state of the
code and is only committed as temporary band-aid until we can assess the
full issue and decide if/how it needs to be adressed.
This fixes the main issue there (essentially a followup to
rB90e12e823ff0: Fix T81854: crash when undoing switch between sculpt and
edit mode).
We basically remove more (hopefully all the remaining!) modifications of
orig mesh from `sculpt_update_object`, as those done here will not be
immediately available in the evaluated data (that specific bug happened
because masking data was added to orig mesh there, but not flushed to
depsgraph evaluated one).
This also goes towards a better separation between handling of evaluated
data and orig one.
Note that modification of orig mesh data can still happen, e.g. values
in some cdlayers, but at least all pointers should now be valid in the
evaluated mesh.
There are still some issues, e.g. we now get an assert/crash in
`multires_reshape_assign_final_coords_from_ccg` when undoing out of the
Sculpt mode, presumably because subdiv_ccg data remains unchanged then
(and hence still has the `has_mask` flag set), while actual mesh data do
not have that cdlayer anymore...
This commit also cleans up/simplifies some code,
`ED_object_sculptmode_enter_ex` was (indirectly) calling
`BKE_sculpt_face_sets_ensure_from_base_mesh_visibility` twice e.g.
Mainly updated the Mantaflow version. It includes the new viscosity solver plugin based on the method from 'Accurate Viscous Free Surfaces for Buckling, Coiling, and Rotating Liquids' (Batty & Bridson).
In the UI, this update adds a new 'Viscosity' section to the fluid modifier UI (liquid domains only). For now, there is a single 'strength' value to control the viscosity of liquids.
This seems to be a longer standing issue. Steps to reproduce were:
* With factory settings, Ctrl+O then F12
* Close the render window using the window close button
* Close the File Browser window using the window close button
This could be OS specific though, at least on macOS this caused a crash.
With the new `ed_util_ops.c` introduced in 2250b5cefe, existing code can be
cleaned up to use it.
* Move new ID preview operators to `ed_util_ops.c`
* Move ED operator registration to `ed_util_ops.c`
* Use doxygen sections in `ed_util_ops.c`
* Rename ID related ED operators to use `ED_OT_lib_id_` prefix.
* Remove unused `#include`s
After 1e799dd26e, the logic to recognize a temporary File Browser window
didn't work correctly anymore. It would recognize a maximized File Browser
inside a temporary window as a temporary File Browser window, and attempt to
close this (rather than returning to the previous layout).
The logic there was pretty weak, and still is I think. A more stable solution
would need bigger refactoring.
With this, it's also not possible to maximize or fullscreen an area within a
temporary window (Preferences, File Browser, render window) anymore. Think that
won't make a noticable difference, since you couldn't open multiple areas there
anyway, and the area seems to be maximized already.
Cleaned up the code a bit to not become more confusing with the changes.
That code looked really like a joke tbh... Random reported memory usage
is not really that important, but the uninitialized items counts was
potentially fairly severe.
Don't add the same stats refresh notifiers multiple times, it can be slow to
search the full list of notifiers for duplicates when there are many.
Fundamentally the time complexity in searching for duplicates is still bad.
Inspired by D9901 from Erik Abrahamsson
Sometimes multiple calls to `bpy.data.orphans_purge()` are needed to
delete all orphans, because a call can turn previously-used datablocks
into orphans. Returning the number of deleted datablocks makes it
possible to keep looping until nothing can be deleted any more.
This patch keeps track of deletions in `id_delete()` so that it can be
returned up the call stack.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D9918
Respond to return values of `fscanf()` and `fread()` to detect and
handle I/O errors. Not only is error handling a good idea, this also
prevents warnings from GCC that `fread()` and `fscanf()` return values
are ignored.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D9915
`seq_convert_transform_animation()` converted only keyframed value, but
when bezier interpolation is used, posotion of handles was unchanged.
This caused significant difference in animation.
I have checked only linear interpolation when testing versioning originally.
This adds a popover to the properties editor. Currently the only setting
is for controlling outliner to properties syncing.
Because we cannot define a perfect heuristic to determine when
properties editors should change tabs based on outliner icon selection,
we need an option to enable or disable this behavior per properties
editor.
There are 3 options for controlling the syncing. Auto uses the heuristic
to only allow tab switching when a properties editor and outliner share
a border. On and off enable and disable syncing respectively.
Differential Revision: https://developer.blender.org/D9758
**Renames parms**:
| **old name** | **new name**
| old_value | lower_value
| target_value | blended_value
| value | strip_value
| inf | influence
**Reason**: {D8296} allows full nla stack evaluation with proper
keyframing support. These names should make it more intuitive how all
the data gets processed and inverted. Note, that I do use the term
"strip_value" instead of something like "fcurve_value" of the tweak
strip. Technically, "strip_value" is closer to what is solved for.
For example, if a noise fmodifier was active for the fcurve, then the
remapping would appear to be wrong. In the future, further solving can
be done afterward, outside of the nla system, to remove the effects of
fmodifiers.
**Renames functions**:
| nla_invert_blend_value | nla_blend_get_inverted_strip_value
| nla_invert_combine_value | nla_combine_get_inverted_strip_value
**Reason**: D8296 adds get_inverted_lower_value() variants,
so "invert" alone is too vague.
**Renames NlaKeyframingContext member**:
| nla_channels | lower_eval_data
**Reason**: D8296 evaluates the upper stack. This name makes it more
obvious what data is stored there.
No functional changes (relative to the dependency below)
Split from {D9247}
Depends on {D9694} since the code was so close to eachother.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D9695
Always assume geometry nodes produce potentially animated meshes or point
clouds. In general it is hard to check if geometry nodes are animated, and
for modifiers this was already weak.
The better solution will likely involving checking which geometry was
modified by the depsgraph on frame change, to replace the current mechanism
of manually checking for certain types of modifiers and animation.
Weight Paint Multi-Paint definitely depends on the weight specific
flag, and vertex group locking also involves group name symmetry
via BKE_object_defgroup_mirror_selection. These two are also
features implemented by me so I feel confident.
The rest of object_vgroup.c possibly should be changed too, but
that requires more consideration than these obvious cases.
Use the `ASSET_MANAGER` icon which is more appropriate than the current one
which was just an unused icon that seemed sorta fitting, but was only meant to
be temporary.
The `ASSET_MANAGER` icon is already used for the Asset Browser, so it's being
reused which we normally avoid. So we may still want to create a dedicated one,
maybe a variation of this one.
Code was removed in 247b10e6a2 but it was incorrect in first place.
Conversion was done for `offset_x` and `offset_y` channel originally,
but it should be done for `scale_x` and `scale_y`
OIIO utils are mandatory for a whole set of tests (Cycles, VSE), and
it's a small package, no reason to not install it.
Also re-enabling package handling of OIIO on RPM-based distro, not sure
why it was disabled but this has become a fairly stable and standard
library now, would not expect issues anymore.
This adds an option (WITH_COMPILER_CCACHE) to build using Ccache if it's
found. Makefiles-based, Ninja-based and Xcode generators are supported.
Pass `-DWITH_COMPILER_CCACHE=ON` to cmake to enable Ccache.
Utility option in GNUmakefile is also added: for e.g.,
`make ninja ccache`.
Reviewed By: brecht, ankitm
Differential Revision: https://developer.blender.org/D9665
T83989 observes that the Attribute Math node always adds its
operands regardless of its operator setting. This was caused
by an oversight committed in rB23233fcf056e42, which overlooked
adjusting the exec function to use the new storage location.
Differential Revision: https://developer.blender.org/D9909
Normally, pure text buttons have no padding at their edges so they
align with edges of buttons, see D9058. However, in several cases
there are labels aligned to the right side of a list widget row,
so they're missing padding against the right edge.
The fix is to use emboss = 'NONE' for such labels, which changes
the drawing style, adding padding on the right edge. (Normally so
labels aligned with the text from non-embossed buttons). This is
not necessarily intended, but it works properly.
For more information, see the revision.
Differential Revision: https://developer.blender.org/D9874
Parts of the tool icons for box, circle, lasso, and tweak select that were
meant to be flat or at a 45 degree angle were slightly misaligned, making
the edge look blurry.
The convention is to put the label at the bottom of the enum, or in the
spot furthest away from the button. This commit reorders the items in
the "Slot", "Layer", and "Pass" menus to be consistent with this
convention. It also reorders the numbering so that higher numbers are
lower.
The original patch was by Adrian Newton (@TFS), with slight changes
and additions.
Differential Revision: https://developer.blender.org/D7142
This value was meant to be used for keeping images that are slowest to
render in cache. Method of measurement was flawed, because it doesn't
take UI overhead into consideration.
Cache panel is to be removed because users should not have to tweak
settings like this. It is not useful for development either, therefore
it is removed completely.
If image is cached twice, it's size has been counted twice as well, but
only image reference count is increased, not memory usage.
Use `MEM_get_memory_in_use()` instead of size own tracking.
Previously, the Annotation panels were a bit buggy in the movie clip editor.
This commit fixes the issue of the panel in the sidebar would disappear
when selecting "Tracks" if no tracks were added to the clip.
To solve this issue the user if given a label text saying "No annotation source"
This commit also removes some grease pencil operators from the toolbar
that do not work with the new annotation system.
This commit also moves the data source choice from the toolbar to the sidebar.
This is needed to migrate the current toolbar to the new tool system
(see T83612)
Some old invalid code was also removed.
Reviewed By: #grease_pencil, antoniov
Differential Revision: https://developer.blender.org/D9729
This new node increases the radiance of an image by a scalar value.
Previously, the only way to adjust the the exposure of an image was with
math node or using the scene's color management.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D9677
This bug was caused by making it so that non-embossed modifier icon
buttons could become an operator button and retain their red highlight
for disabled modifiers. The icon button needs emboss turned off, but
in earlier versions of Blender, `UI_EMBOSS_NONE` would be overridden
by animation or red alert states.
Instead of abusing "NONE" to mean "none unless there is animation or
red alert", this commit adds a new emboss flag for that situation,
`UI_EMBOSS_NONE_OR_STATUS`, which uses no emboss unless there is an
animation state, or another status. There are only a few situations
where this is necessary, so the change isn't too big.
Differential Revision: https://developer.blender.org/D9902
The previous design is rather old and has a couple of problems:
* Scalability: The current solution of adding little icon buttons next to the
data-block name field doesn't scale well. It only works if there's a small
number of operations. We need to be able to place more items there for better
data-block management. Especially with the introduction of library overrides.
* Discoverability: It's not obvious what some of the icons do. They appear and
disappear, but it's not obvious why some are available at times and others
not.
* Unclear Status: Currently their library status (linked, indirectly linked,
broken link, library override) isn't really clear.
* Unusual behavior: Some of the icon buttons allow Shift or Ctrl clicking to
invoke alternative behaviors. This is not a usual pattern in Blender.
This patch does the following changes:
* Adds a menu to the right of the name button to access all kinds of operations
(create, delete, unlink, user management, library overrides, etc).
* Make good use of the "disabled hint" for tooltips, to explain why buttons are
disabled. The UI team wants to establish this as a good practise.
* Use superimposed icons for duplicate and unlink, rather than extra buttons
(uses less space, looks less distracting and is a nice + consistent design
language).
* Remove fake user and user count button, they are available from the menu now.
* Support tooltips for superimposed icons (committed mouse hover feedback to
master already).
* Slightly increase size of the name button - it was already a bit small
before, and the move from real buttons to superimposed icons reduces usable
space for the name itself.
* More clearly differentiate between duplicate and creating a new data-block.
The latter is only available in the menu.
* Display library status icon on the left (linked, missing library, overridden,
asset)
* Disables "Make Single User" button - in review we weren't sure if there are
good use-cases for it, so better to see if we can remove it.
Note that I do expect some aspects of this design to change still. I think some
changes are problematic, but others disagreed. I will open a feedback thread on
devtalk to see what others think.
Differential Revision: https://developer.blender.org/D8554
Reviewed by: Bastien Montagne
Design discussed and agreed on with the UI team, also see T79959.
Since "Float Color" is more commonly used than "Byte Color",
which is not exposed in the interface yet anyway, it makes sense to
drop the "Float" label on the color data type name.
This uses the "id" attribute to randomly pick instances from a collection
for each point.
There is one issue. When the collection is updated (e.g. when an object is
added to it), the nodes modifier is not automatically updated. It seems
like we don't have the infrastructure to support this dependency yet.
The same issue exists in the Boolean modifier and with collision collections.
This should be solved separately soonish.
When "Whole Collection" is disabled, one direct child of the input collection
is instanced at each point. A direct child can be an object or a collection.
Currently, all objects are picked approximately equally often. In the future,
we will provide more control over which point gets which instance.
Differential Revision: https://developer.blender.org/D9884
Ref T82372.
Caused by rB7470c10601d0 where iterating nodetree nodes was changed from
backwards to forwards by mistake.
Maniphest Tasks: T83916
Differential Revision: https://developer.blender.org/D9890
Change the top coordinate of the animation channel list UI elements to
`rect->ymin` so they correctly span from `rect->ymin` to
`channel_height`.
Some buttons in the dope sheet channels didn't scale properly with the
`Keyframe Scale Factor` preferences setting. This was caused by using
the `ymid` value (`ymid = BLI_rctf_cent_y(rect) - 0.5f * ICON_WIDTH`) to
position the buttons that supposed to fill all vertical space in the
channel (with `channel_height` height). The `ymid` value is only
appropriate for the UI elements that with `ICON_WIDTH` height.
Maniphest Tasks: T83716
Reviewed by: sybren
Differential Revision: https://developer.blender.org/D9841
This adds a GPointer class, which is mostly the same as GMutablePointer.
The main difference is that GPointer references const data, while GMutablePointer
references non-const data.
Ref: T82651
Normally people use "Combine XYZ" to input a vector, but it is more
interesting to have an explicit vector input.
So this is basically "Combine XYZ" without any input sockets, the values
are stored in the node itself.
Differential Revision: https://developer.blender.org/D9885
Fix Euler discontinuities in the Bake Action operator, by explicitly
using the previous Euler angles when converting from matrix to rotation.
This basically follows the same approach as used in e4ca1fc4ea, although
the Euler Discontinuity Filter also performs single-channel filtering which
the Bake Action operator doesn't.
In glsl the clamp function has undefined behavior when min > max. For
the clamp node this resulted in differences between cycles and eevee.
This patch adds the expected implementation for minmax.
The old clamp function is still used in cases where we know for certain
that the input values are correct (math node clamp option). GPU uses
optimized code and silicon in these cases.
Some GPU platforms don't support having more than one underscore in
sequence in an attribute name. This change will remove the underscore
as a possible character when encoding to save names.
This patch introduces a partial update of GPUTexture. When rendering
a large image the GPUTexture could have been scaled. The old implementation
would rescale the image on CPU and create a new GPUTexture. This
resulted in flooding the PCI bus.
The new solution would only scale and upload the parts of the GPUTexture
that has been changed. It does this by keeping track of areas of 256x256
pixels. When something changes the tiles that cover that changes will be
rescaled and uploaded the next time the GPUTexture is requested.
Test situation: Default Cube, 4 samples, 19200x10800 tile size 512.
Blender 2.83.9: 4m27s.
Blender 2.91: 20+m (regression)
This patch: 1m01s.
There is still room for more optimizations:
* Reduce the time that an image is locked.
** Use task scheduling to update the tiles of an image.
** Generic optimization of the ImBuf scale method.
Maniphest Tasks: T82591
Differential Revision: https://developer.blender.org/D9591
The outliner already expands the panel for the modifier you click on,
this just extends that idea to also set it active, which is consistent
with behavior of active and selected items elsewhere in Blender.
After rB15083d9e1 the outliner tree is not rebuilt after expanding or
collapsing rows. Because the tree is no longer rebuilt the positions
and flags of the elements are not cleared when collapsing a row. This
caused hover highlights and selections on the collapsed child icons to
be incorrect in many cases.
For example, only the direct children of a collapsed element are drawn
inline. If any grandchild elements had been previously icon row flagged
they would continue to be evaluated as icon row elements despite being
hidden. In this case the x coordinates of the child and grandchild would
overlap causing selection to appear erratic.
Now the flags for inline row icons are explicitly cleared, which was
previously only done because the tree was rebuilt on collapsing rows.
Walk navigation relies on tablet data being set to detect if motion is
absolute. This patch sets tablet data in Ghost to dummy values when a
tablet pen is in range and not handled by Wintab processing.
Expand abbreviations for words like "Bright" (instead of "Brightness"),
"Premul", "Lib", "Dir", etc.
Differential Revision: https://developer.blender.org/D9862
Since creating the attribute node, a helper function has been added to
automatically get the input attribute or a constant value, depending on
the "input type" values for the node. This commit replaces the specific
implementation of that behavior with the new helper function.
The versioning is necessary since the node now has a "storage" struct.
Previously these HSV values were in the color picking space, which meant the
relation to the scene linear RGB values was confusing.
The new situation:
* RGB number buttons: scene linear color space
* HSV number buttons: scene linear color space
* Picker widgets: color picking color space
* Hex: sRGB color space
Fixes T69562, T83853, Ref T68926
This patch adds two related nodes, a node for separating points
and mesh vertices based on a boolean attribute input, and a node
for creating boolean attributes with comparisons.
See the differential for an example file and video.
Point Separate (T83059)
The output in both geometries is just point data, contained in the mesh
and point cloud components, depending which components had data in the
input geometry. Any points with the mask attribute set to true will be
moved from the first geometry output to the second. This means that
for meshes, all edge and face data will be removed. Any point domain
attributes are moved to the correct output geometry as well.
Attribute Compare (T83057)
The attribute compare does the "Equal" and "Not Equal" operations by
comparing vectors and colors based on their distance from each other.
For other operations, the comparison is between the lengths of the
vector inputs. In general, the highest complexity data type is used
for the operation, and a new function to determine that is added.
Differential Revision: https://developer.blender.org/D9876
This revision contains the following changes-
- Updated the existing testing framework for Modifiers for Regression
Testing.
- Tests for Physics modifiers and remaining Generate and Deform modifiers are added.
- The existing `ModifierSpec` is updated with backward compatibility to support Physics Modifiers.
- Now there is support for frame number and giving nested parameters for attributes.
- Some Deform modifiers required Object Operators, e.g. "Bind" in Mesh Deform, so a new class was added to support that functionality.
- A separate class for holding Particles System, they are tested by converting all the particles to mesh and joining it to the mesh they were added.
- Updated the format to add tests for Bevel, Boolean and Operators as
well.
Reviewed By: zazizizou, mont29, campbellbarton
Differential Revision: https://developer.blender.org/D8507
In case of being in Asset browsing mode, the search field is located in
the header (RGN_TYPE_HEADER not RGN_TYPE_UI as for file browsing mode).
To be future proof, now iterate all regions and act if the
"filter_search" can be activated.
Maniphest Tasks: T83888
Differential Revision: https://developer.blender.org/D9882
Caused by Caused by rB83980506957c.
Since above commit, the modifier was created with wrong initial values
[amount was 0.0 and offset was 1.0 -- instead of the other way around].
Since there is no way to fix existing files in a reasonable way I guess,
all we can do here is to make sure that from now on, the defaults are
correct.
Maniphest Tasks: T83886
Differential Revision: https://developer.blender.org/D9881
Currently, the random attribute node doesn't work well for most
workflows because for any change in the input data it outputs
completely different results.
This patch adds an implicit seed attribute input to the node, referred
to by "id". The attribute is hashed for each element using the CPPType
system's hash method, meaning the attribute can have any data type.
Supporting any data type is also important so any attribute can be
copied into the "id" attribute and used as a seed.
The "id" attribute is an example of a "reserved name" attribute,
meaning attributes with this name can be used implicitly by nodes like
the random attribute node. Although it makes it a bit more difficult
to dig deeper, using the name implicitly rather than exposing it as an
input should make the system more accessible and predictable.
Differential Revision: https://developer.blender.org/D9832
The size of the nodes is not enough to give enough context to users what
the sockets are about.
Minimum Distance -> Distance Min
Maximum Density -> Distance Min
Note this does not handle doversion. That means users will have to
manually.
Fix X11 library underlinking, which was breaking Debian and Ubuntu
packages.
From Ubuntu Hirsute changelog:
```
blender (2.83.5+dfsg-4ubuntu1) hirsute; urgency=medium
* Try to also link ghost library with x11, needed because of missing
XConvertSelection symbol link (used in ghost static library).
* Don't use gold, but switch to bfd linker that seems to be working better
on ppc64el.
-- Gianfranco Costamagna <locutusofborg@debian.org> Wed, 11 Nov 2020 14:17:29 +0100
```
Reviewed by: sybren
Differential Revision: https://developer.blender.org/D9617
Some weird proxies apparently can have a local collection instancing...
Not sure this is even really valid for proxies, but in any case we
cannot override that, just detect and properly cancel the operation
then.
Should be backported to 2.91.1 should we do it.
Data of the File Browser context callback needs to be validated and
return `CTX_RESULT_NO_DATA` if the context member is valid but not set
in the current context.
Callback function was using int while update_render_passes_cb_t was
using eNodeSocketDatatype leading to a build warning about different
argument types with MSVC.
Crash happens when using relative path to image in operator properties
and checking image dimensions by loading image with `IMB_loadiffname()`
Ensure path is absolute.
Crash on null dereference in `SEQ_timeline_boundbox()`. This function was
generalized in rB9e4a4c2e996c to work on arbitrary `seqbase`.
Fixed by refactoring `SEQ_timeline_boundbox()` functions to return default
sane values if `seqbase` is `NULL`
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D9878
Time is synchronized by the difference between the WT_PACKET receive
time and the last received PACKET's pkTime. This is used to prevent
Wintab packets from being prematurely expired.
This simple change sets the call_panel operator's "keep_open" property
to True for the viewport snapping panel called with `ctrl-shift-tab`.
There are quite a few settings in this panel, it often makes sense to
change more than one of them at a time, especially because multiple
snap elements can be active at the same time.
Anchored brushes with spherical falloff start off with zero radius, thus
we have no pbvh nodes on the first brush step. This would prevent
initializing the automasking cache [which only happens on the first brush
step].
Maniphest Tasks: T83856
Differential Revision: https://developer.blender.org/D9873
Since a few versions (even before 2.79) we have an option that allows to restrict the vertex tools to operate only on deform groups. This was originally implemented for working with vertex groups for skeletal animation. In that case it is fortunate to have weight tools operate only on deforming vertext groups (vgroups assigned to bones)
In previous versions of Blender (up to 2.79) we have been able to use this option in Mesh Edit mode regardless of the armature mode. The current implementation (since 2.80 as far as i know) enables this option only when the associated armature is in pose mode. this has a bad consequence:
It is not at all intuitive that you have to put the armature into Pose mode before you can make use of the option in mesh edit mode.
Besides this it is not even necessary in the case when the user wants to restrict the tool only to all pose bones. In that case the armature can safely be kept in Object mode. However, when the tool shall apply only to selected pose bones, then it actually makes sense to have the armature in pose mode (as it is implemented right now)
I do not know why this feature has been restricted as described above. It must have got lost somewhere on the way to Blender 2.90
This patch fixes the issue as it allows to select the "restrict to pose bones" option when the armature is in any mode. I see no downsides of this change, actually this is a fix for a feature that once worked and apparently got forgotten in newer releases.
Reviewed By: sybren, campbellbarton
Differential Revision: https://developer.blender.org/D9658
This commit resolves problem introduced in e1665c3d31 - it was
difficult to import media at their original resolution.
This is done by using original resolution as reference for scale.
All crop and strip transform values and their animation is converted
form old files.
To make both workflows easy to use, sequencer tool settings have been
created with preset for preffered scaling method. This setting is in
sequencer timeline header and add image or movie strip operator
properties.
Two new operators have been added:
`sequencer.strip_transform_fit` operator with 3 options: Scale To Fit,
Scale to Fill and Stretch To Fill.
Operator can fail if strip image or video is not loaded currently, this
case should be either sanitized or data loaded on demand.
`sequencer.strip_transform_clear` operator with 4 options:
Clear position, scale, rotation and all (previous 3 options combined).
Reviewed By: sergey, fsiddi
Differential Revision: https://developer.blender.org/D9582
The function is supposed to fail gracefully if there is some error. That
includes not being able to find `xdg-user-dir`. So don't let the error
be printed to the console, it's misleading/annoying.
From what I can tell we'll detect that problem fine and return NULL
then.
This adds a boolean attribute and custom data type, to be used in the
point separate node. It also adds it as supported data types in the
random attribute and attribute fill nodes.
There are more clever ways of storing a boolean attribute that make
more sense in certain situations-- sets, bitfields, and others, this
commit keeps it simple, saving those changes for when there is a proper
use case for them. In any case, we will still probably always want the
idea of a boolean attribute.
Differential Revision: https://developer.blender.org/D9818
Caused by rB7447eb7e7430.
This is just a copy-paste error [previous LISTBASE_FOREACH substitution
of marco loop in that file has a different starting point which is not
appropriate here]
Maniphest Tasks: T83851
Differential Revision: https://developer.blender.org/D9872
This patch does two things:
* Introduce a Seed to the random distribution method
* Bring in a new distribution method for the point scattering node
Patch Review: https://developer.blender.org/D9787
Note: This commit doesn't not handle doversion. Which means that users
need to manually update their files that were using the Point Distribute
node and reconnect inputs to the "Maximum Density" socket.
Original patch by Sebastian Parborg, with changes to not rely on the cy
libraries and overall cleanup.
Patch review by Jacques Lucke, besides help with the new "heap" system
that was required for this algorithm.
Based on Cem Yuksel. 2015. Sample Elimination for Generating Poisson Disk
Sample. Sets. Computer Graphics Forum 34, 2 (May 2015), 25-32
http://www.cemyuksel.com/research/sampleelimination/
This tool implements smearing for multires displacement over the limit
surface, similar to how smearing for colors and topology slide works.
When used the displacement values of the vertices "slide" over the
topology, creating the effect of smearing the surface detail.
As the brush just modifies displacement values instead of coordinates,
the total displacement of the affected area doesn't change. This means
that this smearing effect can be used multiple times over the same area
without generating any artifacts in the topology.
When the brush is used with the pinch or expand smear modes,
displacement differences are pushed into the same area, creating hard
surface effects without pinching the topology.
As any other brush that relies on the limit surface (like displacement
erasers), this will work better after using apply base.
Reviewed By: sergey, JulienKaspar, dbystedt
Differential Revision: https://developer.blender.org/D9659
Otherwise it would just show empty space where the icon is supposed to
be.
Unfortunately this icon is upscaled quite a bit and doesn't look too
great. Would be good to improve but not a high priority.
Casting pointers from one type to another does change the
value of the pointer in some cases. Therefore, casting a span
that contains pointers of one type to a span that contains
pointers of another type, is not generally safe. In practice, this
issue mainly comes up when dealing with classes that have a
vtable.
There are some special cases that are still allowed. For example,
adding const to the pointer does not change the address.
Also, casting to a void pointer is fine.
In cases where implicit conversion is disabled, but one is sure
that the cast is valid, an explicit call of `span.cast<NewType>()`
can be used.
When doing a debug build on windows, blender will
start with the following warning:
"Unable to find the python binary, the multiprocessing
module may not be functional!"
The root cause for this issue is: for a debug build
the python binary is called python_d.exe rather than
just python.exe
This change fixes BKE_appdir_program_python_search
to look for the _d suffix for debug builds on windows
Differential Revision: https://developer.blender.org/D9775
Reviewed by: Campbell Barton
We do not generate overrides for missing data-blocks (aka placeholder
ones) anymore, and properly delete the remaining old overrides of those
during the resync process.
This should prevent constant 'missing data-blocks' messages when opening
blend files with overrides whose libraries have beed edited.
Issue reported by @andy from Blender studio, thanks.
ratio
Caused by rB4eda60c2d82d.
T83801 reported not moving in pixel space, but even without that toggle
above commit caused the translation to not take apsect ratio into
account properly [a translation of 1 on the x axis for example on an
image with non 1:1 aspect ration caused the UVs to not end up in the
same place on the next 'tile']
Above commit removed 'removeAspectRatio()' [the counterpart of
applyAspectRatio -- which does the pixel coord correction internally]
from 'applyTranslation()'.
This was also reported in T83352 [which was closed by rBf3b08af24c9f --
but that only solved the displax in header, not the actual
transformation]
Now bring back 'removeAspectRatio()'.
Maniphest Tasks: T83801
Differential Revision: https://developer.blender.org/D9869
Fix T83415: 3D View is red when using stereo
The red view was caused by SRGB not being enabled for an SRGB texture attached to the framebuffer.
Currently, when configuring a framebuffer, the first texture attachment needs to be an SRGB format in order for the framebuffer to be binded with SRGB enabled.
Thus, simply changing the SRGB texture attachment as the first texture attachment removes the red color in the view.
Reviewed By: #eevee_viewport, jbakker
Maniphest Tasks: T83415
Differential Revision: https://developer.blender.org/D9845
Issue was that not all code paths were taken to determine if
the GPU Texture was premultiplied or not. In this case the result
was set to unpremultiplied what is incorrect.
This fixes broken test case image alpha blend from image_colorspace.
This data structure adds priority queue functionality to an existing array.
The underlying array is not changed. Instead, the priority queue maintains
indices into the original array.
Changing priorities of elements dynamically is supported, but the priority
queue has to be informed of such changes.
This data structure is needed for D9787.
This change is a simple null check on the ID provided to icon_set_image() which
appears to be a legitimate value for the ID when used by some addins
(discovered with PowerSave shortly after syncing to main).
Differential Revision: https://developer.blender.org/D9866
Reviewed by: Julian Eisel
It's useful to easily see which data-blocks are assets and which not. So just
like we usually show the library linking/override icons, we show the asset icon
there (these are mutually exclusive data-block states).
Uses the `'MAT_SPHERE_SKY` icon, which wasn't used before (except by an
add-on!) and is sorta fitting, but not quite. We should either change this one
or add an own asset icon. Meanwhile this isn't too bad :)
Also adds an internal macro to check if a data-block is an asset, consistent to
how we do it for libraries and library overrides.
This makes it possible to trigger a refresh of the data-block preview,
available next to the preview in the Asset Browser sidebar. The previews get
easily outdated and automatically refreshing it all the time is not an option
because it would be a consistently running, quite expensive process. So a
button to cause a refresh should be reasonable.
This button can also be used to switch back from a custom preview to a
generated one. Although that may not be clear, and we should probably think of
a way to explain that better.
Addresses T82719.
The current layout wasn't great at all, and it was planned to polish this. This
does a first round of improvements, some more tweaking may follow.
* Place name button at the top, with no panel and no leading label.
* Add "Preview" panel, people may not want to see the preview all the time,
it's already visible in the file list.
* Move button to browse for a custom preview to the right of the preview, as
icon-only. We have a similar layout in other places (UI-lists, matcaps).
* Don't make the details panel a sub-panel. Looked weird because the parent
doesn't have a header.
* Add info icon to "No asset selected", looks a bit friendlier.
* Minor cleanups in the UI script.
Based on designs and feedback by William Reynish.
This is something we wanted to support doing. It's confusing if users see the
name but it's always grayed out. So be convenient and avoid the confusion.
Script tool for automation of Steam build files for tasks like {T77348}
This script automates creation of the Steam files: download of the archives,
extraction of the archives, preparation of the build scripts (VDF files), actual
building of the Steam game files.
Requirements
============
* MacOS machine - Tested on Catalina 10.15.6. Extracting contents from the DMG
archive did not work Windows nor on Linux using 7-zip. All DMG archives tested
failed to be extracted. As such only MacOS is known to work.
* Steam SDK downloaded from SteamWorks - The `steamcmd` is used to generate the
Steam game files. The path to the `steamcmd` is what is actually needed.
* SteamWorks credentials - Needed to log in using `steamcmd`.
* Login to SteamWorks with the `steamcmd` from the command-line at least once -
Needded to ensure the user is properly logged in. On a new machine the user
will have to go through two-factor authentication.
* App ID and Depot IDs - Needed to create the VDF files.
* Python 3.x - 3.7 was tested.
* Base URL - for downloading the archives.
Reviewed By: Jeroen Bakker
Differential Revision: https://developer.blender.org/D8429
Motivated by `std::string_view` being usable in
const (compile-time) context.
One functional change was needed for StringRef:
`std::char_traits<char>::length(str)` instead of `strlen`.
Reviewed By: JacquesLucke, LazyDodo
Differential Revision: https://developer.blender.org/D9788
Add panels with overlay settings for strips and preview and overlay
enable/disable button.
Entries from the View menus moved to the overlay panels, which will
simplify cluttered View menus.
Additional options have been added:
- Strip Name
- Strip Source(ex. path)
- Strip Duration
So users can now select what info they need to see on the strips. When
No text is displayed, waveforms are drawn in full height.
Reviewed By: ISS, HooglyBoogly, pablovazquez
Differential Revision: https://developer.blender.org/D9751
When in Sequencer/Preview mode, the Sampler was on top, which normally
is the place of Select, and Annotation seems to be after Sampler in the
bottom in the various editors.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D9821
Paste copied strips after playhead, because this is more intuitive.
Previous functionality is still available by enabling "Keep Offset"
property, or under shortcut Ctrl+Shift+V.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D9734
Use the BKE_gpencil_stroke_uniform_subdivide function to subdivide strokes
before interpolation. When the target/source stroke is smaller than the other
stroke, it is subdivided until the lengths match. This improves the overall quality
of the interpolation of different sized strokes.
Before/After video:
{F9511779}
Reviewed By: #grease_pencil, antoniov, pepeland, mendio
Differential Revision: https://developer.blender.org/D9839
This patch adds the option to make the random scaling from the grease pencil array modifier uniform.
The current settings allow a separate value for each of the 3 scaling axis. The modifier also creates different seed values for each axis so there is no way to keep the random scaling uniform.
This patch creates 1 random seed value and applies it to each of the scaling axis.
Here is a demonstration of the previous behavior and the new optional behavior.
{F9485973}
{F9485981}
{F9485798}
Reviewed By: #grease_pencil, antoniov, pepeland
Differential Revision: https://developer.blender.org/D9764
Logic was broken into finding gaps and ofsetting strips.
Functions were modified so they work on explicitly defined seqbase,
so they can be used as python API functions.
Functional changes:
- Improve performance by calculating gap length and offseting strips
at once. Previously strips were offset by one frame.
- Calculate gap from start frame. Previously gap was considered only
inbetween strips.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9730
If Preferences > Interface > Temporary Editors > File Browser is set to
"Maximized Area", "Load Custom Preview" in the Asset Browser would crash
after selecting the file.
1e799dd26e was important to get this issue fixed. This commit just
ensures the file-list is recreated correctly after closing the temporary
File Browser, so the custom preview operator can execute on valid
context.
If Preferences > Interface > Temporary Editors > File Browser is set to
"Maximized Area", opening a File Browser from a File or Asset Browser as
regular editor would cause some issues. For example after closing the
temporary File Browser, the regular browser would take over the file
path and display settings from the temporary one. This is because they
used to share the same area data.
Some similar issues may have happend with temporary image editors.
Now, this commit finally separates the space data of temporary maximized
editors from the regular ones. So the editor data is entirely
independent now, as it should be.
This implements a mesh fairing algorithm and implements the fair
operations for Face Set edit. This edit operations create a smooth as
possible geometry patch in the area of the selected Face Set.
The mesh fairing algorithm is designed by Brett Fedack for the addon
"Mesh Fairing": https://github.com/fedackb/mesh-fairing, with some
modifications:
- The main fairing function in BKE_mesh_fair.h does not triangulate
the mesh. For the test I did in sculpt mode results are good enough
without triangulating the topology. Depending on the use and the
result quality needed for a particular tool, the mesh can be
triangulate in the affected area before starting fairing.
- Cotangents loop weights are not implemented yet. The idea is to
also expose the vertex and loop weights in a different function in
case a tool needs to set up custom weights.
This algorithm will also be used to solve the limitations of line
project and implement the Lasso Project and Polyline Project tools.
It can also be used in tools in other areas of Blender, like Edit Mode
or future retopology tools.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D9603
The boolean solver crashes when there is no geometry in the mesh. Also,
using the trimming tools without a valid intersection in the PBVH will
make the orientation and position functionality of the trimming shape
not work, so this is the safer solution.
Reviewed By: mont29
Maniphest Tasks: T83504
Differential Revision: https://developer.blender.org/D9777
The if statement of the dynamic area mode branch should be an else if.
When using local mode, this was running both the local and global code.
I moved this code to sculpt_cloth and refactored it to use a switch case
to prevent this from happening again.
Reviewed By: mont29
Maniphest Tasks: T83201
Differential Revision: https://developer.blender.org/D9762
This was reported for duplicating particle systems, then using F9 to
enable the 'Duplicate Settings' option (see T83317).
In this case, the operator gets the particle_system from (buttons)
context and if none can get found will duplicate all settings instead.
The reason why none gets found here is that buttons_context() doesnt
have a valid path when called from F9/SCREEN_OT_redo_last, path is
cleared when global undo does a file-read which clears the path (see
lib_link_workspace_layout_restore). It can be recomputed though to be
valid even from redo_last (at least when in the Properties Editor).
This was likely causing other operators (relying on buttons context)
from the Properties Editor to fail as well.
Fixes T83317
Maniphest Tasks: T83317
Differential Revision: https://developer.blender.org/D9825
If Preferences > Interface > Temporary Editors > File Browser is set to
"Maximized Area", opening a File Browser from an Asset Browser would
cause the new maximized editor to be an Asset Browser. Exiting it again
would crash.
This fixes the wrong behavior and the crash. There's still an issue with
exiting the editor again, it stays a File Browser then and doesn't go
back to being an Asset Browser. That's to be fixed separately.
`blf_dir_search` BLF util would not properly handle relative fonts not
found in pre-defined 'system fonts' directoriesi stored in
`global_font_dir` global variable.
Now it rebases relative paths to current .blend file location as
expected.
Note: the fact that VSE is setting font ptaths relative by default is
probably not actually desired, but this is another issue really. See
`BKE_sequencer_text_font_load` code.
Storing the asset library reference by name wasn't a good idea, I thought it
would work with a careful fallback, but it's easier to just use the index
instead. So change to using indices, make sure fallback methods work reliable
and make sure the file list is updated when asset libraries are removed.
I added a new notifier type for the latter, I prefer not using file notifiers
in asset-library/preferences code. We have more than enough values for
notifiers left.
The `!BKE_previewimg_is_finished()` in `icon_preview_startjob_all_sizes()`
would fail.
Caused by 990bd9acf243ae. We have to be more picky about tagging previews as
unfinished after file read. But we also have to consider files stored in old
versions and set the unfinished tag as needed.
When the Asset Browser was showing the "Current File" repository and the
sidebar was open, undoing could crash, because the context API returned freed
data.
Don't let context return anything if a refresh is pending due to data changes
like undo/redo.
In D9722 we agreed on using `[home-directory]/Documents/Blender/Assets` for
the default asset library. I just forgot to do the change before committing.
(The default repository is just a named path, it's *not* a default library with
bundled assets.)
Previews would be flagged as unfinished when reading. Instead clear the flag
and always consider them finished upon reading. If we wouldn't do this, the
File Browser would keep running the preview updating to wait for the preview to
finish. It could be smarter and also check if there's actually a preview job
running.
Instead, I think it will just display an unfilled buffer for now. Up until
today we wouldn't even know if a stored preview is finished or not, so it would
always assume they are finished. We do the same now, but have the option to
make it smarter.
This introduces the User Interface part of the Asset Browser, based on the
design in T54642.
Additions:
* New Asset Browser (internally a sub-editor of the File Browser).
* Navigation region showing asset categories.
* Main region showing the assets of the selected asset library with previews.
The assets may be stored over multiple .blends in the directory that's
"mounted" as asset library in the Preferences. They will all be shown in this
list.
* Header with an asset library dropdown, allowing to choose the active asset
library to show. Options are the "Current File" as asset library and all
custom libraries.
* Display popover, filter popover and search box (partially dummies, see
T82680).
* Sidebar showing the metadata of the currently active file (name, preview,
description and tags), which can be edited for assets in the "Current File"
asset library. (For others it will reset on reload.)
* The sidebar includes a button to load a custom preview image from a file.
* Make asset files draggable (with preview image).
* If a library with invalid path is selected, a message is drawn in the main
region to help the user understand what's wrong.
* Operators to add and remove asset tags. Exposed in the sidebar.
* "Only Assets" option for Link/Append.
* Internal utilities for asset UI scripts.
For screenshots or demo videos, please see D9725. Or the 2.92 release notes.
Note that there are many things to be tweaked and polished in the Asset Browser
UI still. For example, the filter and display popovers are mostly dummies. See
T82680.
Part of the first Asset Browser milestone. Check the #asset_browser_milestone_1
project milestone on developer.blender.org.
Differential Revision: https://developer.blender.org/D9725
Reviewed by: Brecht Van Lommel, Hans Goudey
The Asset Browser will be a sub-editor of the File Browser. This prepares the
File Browser code for that.
**File-Lists**
* Support loading assets with metadata read from external files into the
file-list.
* New main based file-list type, for the "Current File" asset library.
* Refresh file-list when switching between browse modes or asset libraries.
* Support empty file-lists (asset library with no assets).
* Store file previews as icons, so scripts can reference them via icon-id. See
previous commit.
**Space Data**
* Introduce "browse mode" to differeniate between file and asset browsing.
* Add `FileAssetSelectParams` to `SpaceFile`, with `FileSelectParams` as base.
Makes sure data is separated between asset and file browsing when switching
between them. The active params can be obtained through
`ED_fileselect_get_active_params()`.
* `FileAssetSelectParams` stores the currently visible asset library ID.
* Introduce file history abstraction so file and asset browsing can keep a
separate history (previous and next directories).
**General**
* Option to only show asset data-blocks while file browsing (not exposed here).
* Add "active_file" context member, so scripts can get and display info about
the active file.
* Add "active_id" context member, so `ED_OT_lib_id_load_custom_preview` can set
a custom ID preview. (Only for "Current File" asset library)
* Expose some of `FileDirEntry` in RNA as (non-editable). That way scripts can
obtain name, preview icon and asset-data.
Part of the first Asset Browser milestone. Check the #asset_browser_milestone_1
project milestone on developer.blender.org.
Differential Revision: https://developer.blender.org/D9724
Reviewed by: Bastien Montagne
One of the core design aspects of the Asset Browser is that users can "mount"
custom asset libraries via the Preferences. Currently an asset library is just
a directory with one or more .blend files in it. We could easily support a
single .blend file as asset library as well (rather than a directory). It's
just disabled currently.
Note that in earlier designs, asset libraries were called repositories.
Idea is simple: In Preferences > File Paths, you can create custom libraries,
by setting a name and selecting a path. The name is ensured to be unique. If
the name or path are empty, the Asset Browser will not show it in the list of
available asset libraries.
The library path is not checked for validity, the Asset Browser will allow
selecting invalid libraries, but show a message instead of the file list, to
help the user understand what's going on.
Of course the actual Asset Browser UI is not part of this commit, it's in one
of the following ones.
{F9497950}
Part of the first Asset Browser milestone. Check the #asset_browser_milestone_1
project milestone on developer.blender.org.
Differential Revision: https://developer.blender.org/D9722
Reviewed by: Brecht Van Lommel, Hans Goudey
For the Asset Browser, it needs to be possible to drag assets into various
editors, which may not come from the current .blend file. In other words, the
dragging needs to work with just the asset metadata, without direct access to
the data-block itself.
Idea is simple: When dragging an asset, store the source file-path and
data-block name and when dropping, append the data-block. It uses existing drop
operators, but the function to get the dropped data-block is replaced with one
that returns the local data-block, or, in case of an external asset, appends
the data-block first.
The drop operators need to be adjusted to use this new function that respects
assets. With this patch it only works for dragging assets into the 3D view.
Note that I expect this to be a short-lived change. A refactor like D4071 is
needed to make the drag & drop system more future proof for assets and other
use cases.
Part of the first Asset Browser milestone. Check the #asset_browser_milestone_1
project milestone on developer.blender.org.
Differential Revision: https://developer.blender.org/D9721
Reviewed by: Bastien Montagne, Brecht Van Lommel
* Support defining (not necessarily rendering) icons in threads. Needed so the
File Browser can expose file previews with an icon-id to scripts.
** For that, ported `icons.c` to C++, to be able to use scope based mutex locks
(cleaner & safer code). Had to do some cleanups and minor refactoring for
that.
* Added support for ImBuf icons, as a decent way for icons to hold the file
preview buffers.
* Tag previews as "unfinished" while they render in a thread, for the File
Browser to dynamically load previews as they get finished.
* Better handle cases where threaded preview generation is requested, but the
ID type doesn't support it (fallback to single threaded). This is for general
sanity of the code (as in, safety and cleanness)
* Enabled asset notifier for custom preview loading operator, was just disabled
because `NC_ASSET` wasn't defined in master yet.
Part of the first Asset Browser milestone. Check the #asset_browser_milestone_1
project milestone on developer.blender.org.
Differential Revision: https://developer.blender.org/D9719
Reviewed by: Bastien Montagne, Brecht Van Lommel
This makes it possible to turn data-blocks into assets and back into normal
data-blocks. A core design decision made for the asset system is that not every
data-block should be an asset, because not every data-block is made for reuse.
Users have to explicitly mark data-blocks as assets.
Exposes "Mark Asset" and "Clear Asset" in Outliner context menus (currently ID
Data submenu) and button context menus. We are still not too happy with the
names, they may change.
This uses the new context members to pass data-blocks to operators, added in
af008f5532 and 0c1d476923.
Part of the first Asset Browser milestone. Check the #asset_browser_milestone_1
project milestone on developer.blender.org.
Differential Revision: https://developer.blender.org/D9717
Reviewed by: Brecht Van Lommel
Asset metadata is what turns a regular data-block into an asset. It is a small
data-structure, but a key part of the technical design of the asset system.
The design foresees that asset data-blocks store an `ID.asset_data` pointer of
type `AssetMetaData`. This data **must not** have dependencies on other
data-blocks or data-block data, it must be an independent unit. That way we can
read asset-metadata from .blends without reading anything else from the file.
The Asset Browser will use this metadata (together with the data-block name,
preview and file path) to represent assets in the file list.
Includes:
* New `ID.asset_data` for asset metadata.
* Asset tags, description and custom properties.
* BKE code to manage asset meta-data and asset tags.
* Code to read asset data from files, without reading IDs.
* RNA for asset metadata (including tags)
Part of the first Asset Browser milestone. Check the #asset_browser_milestone_1
project milestone on developer.blender.org.
Differential Revision: https://developer.blender.org/D9716
Reviewed by: Bastien Montagne, Brecht Van Lommel
The geometry-nodes features no longer depend on the point cloud object.
Therefore the point cloud object, although important in the future, can
be postponed until we have render and edit mode fully working.
This reverts commits:
* ea74ed5a7a.
* dc614c68ef.
This implements the design proposed in T83357.
The goal is to allow the geometry nodes modifier on mesh objects to
output instances and potentially other geometry types. Both problems
are tackled by allowing mesh objects to evaluate to a geometry set,
instead of just a single mesh id data block. The geometry set can
contain a mesh but also other data like instances and a point cloud.
I can't say that I'm sure that this commit won't introduce bugs. Mainly
the temporary object creation during rendering seems a bit brittle.
BUT, we can be reasonably sure that this commit will not introduce
regressions (at least not ones, that are hard to fix). This is because
the code has been written in a way that minimizes changes for existing
functionality.
Given that we intend to hide the point cloud object for the next release,
we won't even have to worry about temporary object creation for now.
An important part of the technical design is to make sure that
`ObjectRuntime->data_eval` contains the same data before and after this
patch. This helps to make sure, that existing code paths are impacted as
little as possible.
Instead of fully replacing `data_eval`, there is `geometry_set_eval`,
which contains all the geometry components an object evaluated to
(including the data referenced by `data_eval`).
For now, not much code has to be aware of `geometry_set_eval`. Mainly
the depsgraph object iterator and the instances system have to know
about it.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D9851
The matte_id is stored in a different structure in 2.92. This patch will
write the old matte_id field so the files can be opened correctly in
older versions.
Apparently the ID pointer can be NULL, which most code here assumes is
not the case. But it's very fragile & finicky, there is one code path
were it's allowed to be NULL.
Add necessary NULL-checks, an assert as sanity check and a comment to
note the possibility of NULL.
Remove DNA headers, using forward declarations where possible.
Also removed duplicate header, header including it's self
and unnecessary inclusion of libc system headers from BKE header.
See T82309#1055564 {T63675} and their duplicates for how Default-off
can cause confusion.
This is just for convenience since it allows animators to keyframe
outside of the strip's bounds by default. This was likely off by
default before since Syncing Length would undesirably shift the whole
animation after leaving tweak mode (fixed by {D7602}) and the animator
wasn't able to keyframe outside the strip bounds anyways
(fixed by {D7533}). Now it's better if the flag was on by default.
While the animator is still roughly developing their animation NLA-wise
they won't have to worry about strip bound keying failures. When they
are more certain of the strip bounds, they can disable the flag to
prevent affecting the rest of the NLA system.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D9661
It's an explicit check to prevent division by zero if caller hasn't
done the check. Future patch {D8867} will not use the nla remap
function and thus not do the check. This patch also replaces some
float (==) equality checks with IS_EQF().
Split from {D9247}
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D9694
And removes redundant index local variable. Future patches {D8296} and
{D8867} make use of this function.
No functional changes.
Split from {D9247}
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D9693
The strips were given the wrong owner ID. This only caused issues for
python based UI as far as I know. Property changes would not properly
update the viewport.
Reviewed By: lichtwerk
Differential Revision: https://developer.blender.org/D9685
This commit adds a simple utility function for getting the data type of an
attribute or its "constant" socket counterparts. No functional changes.
Differential Revision: https://developer.blender.org/D9819
Issues were:
* Abusing of `WITH_PYTHON_INSTALL_NUMPY` by both Audaspace and
Mantaflow.
- `PYTHON_INSTALL` options only decide whether we copy python (and
some extra modules) in our Blender installation. On linux it
makes much more sense to use global python installation.
- Now we have instead a proper `WITH_PYTHON_NUMPY`
* Bad assumptions regarding path of headers relative to path of python
module.
- In current Debian testing, modules are under `python3.9`
directory, while headers are under `python3` directory.
- Now we properly `find_path` for headers as well, modifying
`find_python_package` to take an optional argument for headers.
Note that the required changes done to `extern` libraries are in
blender-specific files that do not exist upstream.
Differential Revision: https://developer.blender.org/D9773
This changes the way how the mattes are stored in the compositor node. This used to
be a single string what was decoded/encoded when needed. The new data structure
stores all entries in `CryptomatteEntry` and is converted to the old `matte_id`
property on the fly.
This is done for some future changes in the workflow where a more structured
approach leads to less confusing and easier to read code.
Sometimes the geometry nodes modifier does support mapping and
sometimes it does not. We have no infrastruture to determine this ahead
of time currently. In order to support common use cases, it makes sense
to add this flag to the modifier.
One such common use case is to use the mesh as surface that other
things are distributed on. Often, the distribution is controlled by vertex
groups. Therefore, it would be helpful if the modifier is evaluated
when the object is in vertex paint mode. This allows the user to see the
distributed objects while painting.
If the nodes modifier transforms the mesh in any way, vertex painting
might not work as expected anymore, because the `deformMatrices`
callback is not implemented. I'm not sure how this can be solved nicely, yet.
Without this, the modifier evaluation code might remove any
vertex groups from the mesh for performance reasons.
We can't say for sure whether the node group will need the vertex
groups, but it is quite likely.
Ref T83357.
This patch will add volumetric transmittance to the cryptomatte coverage
data of all samples when post processing the cryptomatte passes.
It was discussed with Cycles that this is desired, but tricky to
implement in Cycles.
The shaders were not tagged for a needed geometry update when the displacement method was modified, neither were the Geometry and Object managers.
Reviewed By: kevindietrich
Maniphest Tasks: T75539
Differential Revision: https://developer.blender.org/D8896
Object previews are really helpful for visual data-block selection, like asset
browsing. Having them be generative should also be quite handy and should work
well enough in many, if not most cases.
What this does is simple:
* Place the object (actually a deep copy of it, for thread safety) in a virtual
.blend into an empty scene/view-layer.
* Add a camera, point it towards the front of the object, assuming that means
pointing towards its +Y axis.
* Use "Camera Fit Frame to Selected" logic to put the object into frame.
* Create a threaded off-screen render.
Of course, such an automatic preview will not work in all situations. E.g. it
currently does a bad job capturing a single plane. We could add options for
more advanced automatic previews, but probably custom previews is more
important, which I committed already (812ea91842).
Part of the first Asset Browser milestone. Check the #asset_browser_milestone_1
project milestone on developer.blender.org.
Reviewed as part of https://developer.blender.org/D9719.
Reviewed by: Bastien Montagne, Brecht Van Lommel
Required changes to make it compile with clang tidy:
* Use c++ includes like (e.g. climits instead limits.h).
* Insert type casts when casting from void* to something else.
* Replace NULL with nullptr.
* Insert casts from int to enum.
* Replace designed initializers (not supported in C++ yet).
* Use blender::Vector instead of BLI_array_staticdeclare (does not compile with C++).
* Replace typedef statements.
Ref T83357.
No automatic preview generation will ever be good enough to cover all cases
well. So custom preview images are a must for a preview driven data-block
selection - like for asset browsing.
The operator simply allows selecting an image file, which will then be read and
copied into the data-blocks preview (resized if necessary).
There's no UI for this currently and the operator won't be available in the
search menu yet. It will later once the Asset Browser UI is merged.
Reviewed as part of https://developer.blender.org/D9719.
Reviewed by: Bastien Montagne, Brecht Van Lommel
This commit removes geometry from meshes and shapekeys, and embedded
files, from liboverride IDs.
This data is never overrideable, there is no reason to store extra
useless copies of it in production files.
See T78944.
Note that we may add more data to be skipped on write for liboverrides
in the future, but this commit should address all the most important
cases already.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D9810
Issues were:
* Abusing of `WITH_PYTHON_INSTALL_NUMPY` by both Audaspace and
Mantaflow.
- `PYTHON_INSTALL` options only decide whether we copy python (and
some extra modules) in our Blender installation. On linux it
makes much more sense to use global python installation.
- Now we have instead a proper `WITH_PYTHON_NUMPY`
* Bad assumptions regarding path of headers relative to path of python
module.
- In current Debian testing, modules are under `python3.9`
directory, while headers are under `python3` directory.
- Now we properly `find_path` for headers as well, modifying
`find_python_package` to take an optional argument for headers.
Note that the required changes done to `extern` libraries are in
blender-specific files that do not exist upstream.
Differential Revision: https://developer.blender.org/D9773
This adds the missing options for the effects as it is done in modifiers.
Reviewed By: HooglyBoogly
Maniphest Tasks: T83696
Differential Revision: https://developer.blender.org/D9838
In Cycles the volume transmittance is already composited into the color
passes. In Eevee the volume transmittance pass was separate and needed
to be composited in the compositor. This patch adds the volume
transmittance pass direct in the next render passes:
* Diffuse Color
* Specular Color
* Emission
* Environment
This patch includes the removal of the volume transmittance render pass.
It also renames the volume render passes to match Cycles. The setting
themselves aren't unified.
Maniphest Tasks: T81134
This should be a final piece of the changes for the active modifier
interface. Before, it was necessary to click on the blank space of a
modifier panel to set it active (not the header), this commit allows
clicking on the icon also.
The spacing with the spacing with the expand button would ideally
be a bit larger, but the layout system doesn't offer much flexibility
here.
Node tree types from addons were selectable in the modifier's drop-down.
Obviously they didn't do anything, but it shouldn't be possible anyway.
This was just caused by an unimplemented poll function.
Approximately 33 changes of capitalization to conform to MLA title style.
Differential Revision: https://developer.blender.org/D9796
Reviewed by Julian Eisel
This makes the exact boolean have zero weights for any vertex groups
on any newly created vertices, which is what the fast solver does.
The exact boolean solver was interpolating vertex data when interpolating
loop data in newly created faces. Not sure why I chose that. The Fast
boolean solver doesn't do that, so I stopped doing it too.
Using 'is/means/equal' words in place of equal sign in descriptions.
Differential Revision: https://developer.blender.org/D9799
Reviewed by Hans Goudey
Could not select left quarter of the screen in stereo side-by-side mode on high dpi displays.
Differential Revision: https://developer.blender.org/D9836
Reviewed by Julian Eisel
New dialog box layout with large alert icon for the Python script execution warning popup.
Differential Revision: https://developer.blender.org/D9390
Reviewed by Hans Goudey
Remove 'U.wheellinescroll' preference, currently hidden and unused.
Differential Revision: https://developer.blender.org/D9616
Reviewed by Brecht Van Lommel
It turns out that after the fix to T83196 (rB814b2787cadd) the matrix
to quaternion conversion can produce noncanonical results in large
areas of the rotation space, when previously this was limited to
way smaller areas. This in turn causes Swing+Twist math to produce
angles beyond 180 degrees, e.g. outputting a -120..240 range.
This fixes both issues, ensuring that conversion outputs a canonical
result, and decomposition canonifies its input.
This was reported in chat by @jpbouza.
As a followup for rB2b3d85d7d6771, this commit adds the remove and
copy operators for grease pencil modifiers, effects, and constraints
where they apply.
If the destination layer hadn't keyframe, a new keyframe was added and later the merge layer strokes were added, but this could change the animation because the new frame replaced the old drawings of the target layer.
Now, before merge the layer, all keyframes are added in the target layer in order to keep the drawings.
This patch introduces a new BKE function that performs a uniform subdivide.
The goal of this function is to subdivide the stroke to reach a target number of points while maintaining its shape, color, and weights.
This is done by repeatedly subdividing the longest edge in the stroke. Every subdivision adds a new point at the exact middle point of an edge.
The function is intended to be used in the interpolation operators to give better results when interpolating between different sized strokes.
Reviewed By: antoniov
Differential Revision: https://developer.blender.org/D9835
This is similar to c4a2067130130d, but applies to the general UI and is only
about single data-blocks. Here there was a similar problem: How can buttons
pass the data they represent to operators? We currently resort to ugly ad-hoc
solutions like `UI_context_active_but_get_tab_ID()`. So the operator would need
to know that it is executed on a tab button that represents a data-block.
A single button can now hand operators a data-block to operate on. The operator
can request it via the "id" context member (`CTX_data_pointer_get_type(C, "id",
&RNA_ID)` in C, `bpy.context.id` in .py).
In this commit, it is already set in the following places:
* Generic RNA button code sets it to the pointed to data-block, if the button
represents a data-block RNA pointer property. (I.e for general data-block
search buttons.)
* Data-block selectors (`templateID`) set it to the currently active data-block.
* The material slot UI-List sets it for each slot to the material it represents.
The button context menu code is modified so its operators use the context set
for the layout of its parent button (i.e. `layout.context_pointer_set()`).
No user visible changes. This new design isn't actually used yet. It will be
soon for asset operators.
Reviewed as part of https://developer.blender.org/D9717.
Reviewed by: Brecht Van Lommel
The way the Outliner integrates operations on selected tree elements is known
to be quite problematic amongst developers. The context menu is generated in an
unusual way and doesn't use the normal operator system. Instead, changes are
applied via a recursive callback system. Things are quite ad-hoc, and the
callbacks often implement logic that should not be in the Outliner, but in
entirely different modules. Often these modules already contain the logic, but
as proper operators.
This commit is a step into a hopefully better direction that should allow us to
put actual operators into Outliner context menus. It starts solving the problem
of: How can the Outliner pass selected data to operators. It implements it for
data-blocks only, but other data could do it in the same way.
Idea is to keep doing what operators were initially designed to do: Operate on
context.
Operators can now query a "selected_ids" context member
(`CTX_data_selected_ids()` in C, `bpy.context.selected_ids` in .py). If an
Outliner is active, it will generate a list of selected data-blocks as a
response, via its `SpaceType.context` callback.
Any other editor could do the same.
No user visible changes. This new design isn't actually used yet. It will be
soon for asset operators.
Reviewed as part of https://developer.blender.org/D9717.
Reviewed by: Brecht Van Lommel
BLI_getenv has always incorrectly returned ascii rather
than UTF-8. This change corrects this behaviour.
This resolves issues when the `BLENDER_USER_CONFIG`
environment variable contains a path with Unicode characters
on windows as reported in T74510 (but unlikely the root
cause for the issue at hand there)
Differential Revision: https://developer.blender.org/D9831
Reviewed by: brecht
Don't refuse to load 5-channel images, instead drop any channels after the 4th
and hope that the first channels represent RGBA.
Differential Revision: https://developer.blender.org/D9820
The flag syncing code expects to find collection flags in same view
layer before and after the move, it even has an assert for it. However,
there is one case where this doesn't happen, when dragging a collection
that exists in two scenes to the master collection.
This commit removes this assert, frees the temporary flag structs
separately, and updates some comments with this information.
There is more detail in the adjusted comment.
Differential Revision: https://developer.blender.org/D9785
Root of the issue was missing management of ID pointers in the cloth
modifier data stored in ParticleSystem for hair physics, in the
'foreach_id' particle system code.
Using modifier's 'foreach_id' code in psys one unfortunately requires
some ugly conversion gymnastics, but this is still better than having
dedicated code for that case.
Note that this is actually a fairly critical issue, fix should be
backported to 2.91.1 should we do it, and to 2.83 LTS as well I think.
This document helps Blender users to known what is the library of each
individual 3rd party components that Blender depend on.
Generated using:
https://github.com/amzn/oss-attribution-builder
This is based on the libraries in extern and the svn libraries.
For the libraries in extern the README.blender was used as reference.
For the libraries in svn I used `cmake/versions.cmake`.
Note that the crediting is a bit of hit and miss. For some projects this
is very clear, while for others I had to do some digging. Either way I
gave my best shot.
The sources to (re-)generate this file is local at the moment. But it
should be moved to our infra-structure at some point.
Differential Revision: https://developer.blender.org/D9798
The Point Instance node can instance entire collections now.
Before, only individual collections were supported.
Randomly selecting objects from the collection on a per point basis
is not support, yet.
Last part of D9739.
Ref T82372.
The implementation is pretty much the same as for Object sockets.
The socket color is the one that is used for collections in the outliner.
Part of D9739.
Based on testing by Intel, rendering on Iris GPUs and upcoming Xe GPUs
should work. This is enabled on Windows and Linux.
More testing is needed to verify correctness and performance in production
scenes, but our basic benchmark files seem to give correct results.
Scale Mac trackpad scrolling changes by pixel size of output device.
Differential Revision: https://developer.blender.org/D9723
Reviewed by Brecht Van Lommel
The previous `BKE_appdir_folder_default()` was confusing, it would return the
home directory on Linux and macOS, but the Documents directory on Windows.
Plus, for the Asset Browser, we want to use the Documents directory for the
default asset library on all platforms.
This attempts to clean up the API to avoid confusion, while adding the newly
needed functionality.
* `BKE_appdir_folder_default()` should behave as before, but the implementation
changed:
** Removes apparently incorrect usage of `XDG_DOCUMENTS_DIR` on Unix systems -
this seems to be a config file variable, not an environment variable. Always
use `$HOME` instead, which this ended up using anyway.
** On Windows it doesn't attempt to use `%HOME%` anymore and gets the Documents
directory directly.
* Add `BKE_appdir_folder_home()` to gives the top-level user directory on all
platforms.
* Add `BKE_appdir_folder_documents()` to always get the user documents
directory on all platforms.
There should be no user noticable behavior change.
Differential Revision: https://developer.blender.org/D9800
Reviewed by: Brecht Van Lommel
When we had to get special user directories, we'd usually do it in varying,
rather ad-hoc ways. It would be done with a bunch of `#ifdef`s for the
different operating systems. Also, some of the used Win32 functions were legacy
ones and the API docs recommend using newer ones.
Further, seems `BKE_appdir_folder_default()` used `XDG_DOCUMENTS_DIR` wrong.
It's not supposed to be an environment variable but a value inside a config
file.
This adds the platform dependent logic to Ghost, so we can abstract it away
nicely using the `GHOST_ISystemPaths` interface. Getting the desktop directory
for example can now easily be done with:
`GHOST_getUserSpecialDir(GHOST_kUserSpecialDirDesktop).`
For now I added the logic for desktop, documents, downloads, videos, images and
music directories, even though we only use the Documents one. We can extend/
change this as needed, it's easy to do now.
On Windows and macOS, it uses pretty much the same way to access the
directories as elsewhere already. On Linux, it uses the `xdg-user-dir` command
that seems to be available by default on most Linux systems.
No functional changes. The new queries are not actually used yet.
Differential Revision: https://developer.blender.org/D9800
Reviewed by: Brecht Van Lommel
Was failing for weightpaint and vertexpaint.
Selection flags were actually changed, but the update in the viewport
wasnt immediate, leading to confusion when the update happened later
(e.g. when using the weight gradient tool as done in the report).
We need to tag ID_RECALC_SELECT and send ND_SELECT notifier here. This
could be done explicitly, but there is also existing functionality
available that does this.
Note: the way updates happen for paintfaces vs. paintverts looks a bit
inconsistent (so this could be part of a later cleanup commit)
Maniphest Tasks: T82881
Differential Revision: https://developer.blender.org/D9631
Adds support for building multiple BVH types in order to support using both CPU and OptiX
devices for rendering simultaneously. Primitive packing for Embree and OptiX is now
standalone, so it only needs to be run once and can be shared between the two. Additionally,
BVH building was made a device call, so that each device backend can decide how to
perform the building. The multi-device for instance creates a special multi-BVH that holds
references to several sub-BVHs, one for each sub-device.
Reviewed By: brecht, kevindietrich
Differential Revision: https://developer.blender.org/D9718
This node can be used to mix two attributes in various ways.
The blend modes are the same as in the MixRGB shader node.
Differential Revision: https://developer.blender.org/D9737
Ref T82374.
When compiling on Windows, the following warnings occur:
```[3468/4560] Building C object source\blender\draw\CMakeFiles\bf_draw.dir\engines\eevee\eevee_cryptomatte.c.obj
C:\blender-git\blender\source\blender\draw\engines\eevee\eevee_cryptomatte.c(306): warning C4047: 'function': 'bool' differs in levels of indirection from 'void *'
C:\blender-git\blender\source\blender\draw\engines\eevee\eevee_cryptomatte.c(306): warning C4024: 'eevee_cryptomatte_shading_group_create': different types for formal and actual parameter 5```
As @Severin pointed out [here](https://developer.blender.org/rB76a0b322e4d3244e59a154c8255b84a4fbc33117#288960), this is due to the last two arguments being flipped. This diff corrects the order.
Reviewed By: Severin, fclem
Differential Revision: https://developer.blender.org/D9809
duplicated particle system
When particle settings are duplicated along with the particle system,
this means a change in relations, was missing
'DEG_relations_tag_update'.
Maniphest Tasks: T83640
Differential Revision: https://developer.blender.org/D9823
The parameter type was incorrectly changed in rB6be56c13e96048cbc494ba5473a8deaf2cf5a6f8 by me.
This can be any id and does not have to be a node tree.
I thought I had reasoned that the add_patch would only happen
when the patch was not already in a cell, but I missed reasoning
about merged cells. So switched to a set 'add' instead of 'add_new'.
This commit adds a node that fills every element of an attribute
with the same value. Currently it supports float, vector, and color
attributes. An immediate use case is for "billboard" scattering.
Currently people are using the same input to a Random Attribute node's
min and max input to fill every element of a vector with the same value,
which is an unintuitive way to accomplish the same thing.
Differential Revision: https://developer.blender.org/D9790
Since the initial merge of the geometry nodes project, the modifyPointCloud
function already was already modifying a geometry set. The function wasn't
renamed back then, because then the merge would have touched many
more files.
Ref T83357.
Caused by rB4212b6528af.
outlineColor is computed by the vertex shader, so not a uniform.
So outlineColor was undefined.
note: it was still possible to run into the situation that a selected UV
is drawn ontop of a selected pinned UV [you had to disable sticky
selection for this], now also make sure selected-pinned are drawn
topmost, then selected, then unselected UVs.
Maniphest Tasks: T83361
Differential Revision: https://developer.blender.org/D9786
Previously, the transformation of recursive instances did not work as
on would expect. Second-level instances would detach from first-level
instances when the object was moved.
This was returning an empty allocated string, however almost
all callers checked if the return value was NULL before freeing,
making for misunderstandings on the intended use of this function.
BCAnimationSampler::initialize_curves for example detected the
f-curves animation type to 'bone' based on a non-NULL return value
which never failed.
Also fixes two leaks where the the result of BLI_str_quoted_substrN
wasn't freed.
BLI_str_quoted_substrN didn't unescape the resulting string,
yet all callers were using this with animation paths which are
created using BLI_str_escape().
- Fix BLI_str_quoted_substrN use with escaped strings by calling
BLI_str_unescape().
Note that it's possible we want an a version of this function that
keeps escape characters. This could be added if it's required.
- Fix end quote detection using BLI_str_escape_find_quote
checking for `\"` isn't reliable since an even number of back-slashes
before a quote means it's not escaped.
The issue is caused by stale data on the Mesh Node which is not cleared
during synchronizing since the socket API refactor so that we can detect
changes. However, synchronization only updates the sockets of the Mesh,
so other properties were left with outdated values.
This caused an underflow when computing attribute size for undisplaced
coordinates as it was using the current number of vertices minus the
previous count of subdivision vertices, which at this point should be 0.
Added a simple method to clear non socket data. Also modified
Mesh.add_undisplaced to always use an ATTR_PRIM_GEOMETRY as the data is
not subdivided yet and it avoids any further issues regarding computing
attribute sizes.
This adds deformation types to snake hook and the elastic deformation
type. This mode deforms the mesh using a kelvinlet instead of applying
the displacement directly inside the brush radius, which is great for
stylized shapes sketching.
Changes in rake rotation when using elastic are too strong when set
to 1, so I'll add a nicer way to support rake rotations with smoother
transitions in the future.
Reviewed By: sergey, JulienKaspar
Differential Revision: https://developer.blender.org/D9560
relation immediately
Texture and ParticleSettings have a DEG relation, but
`DEG_relations_tag_update` was not called when the texture changed.
This lead to no updates when e.g. texture size changes, relation only
went into full effect after save/reload or adding/removing keyframes.
Two places were additional relation tagging is needed:
- ParticleSettings `active_texture` changes
- ParticleSettingsTextureSlot (basically any TextureSlots') texture
changes
Maniphest Tasks: T82242
Differential Revision: https://developer.blender.org/D9393
The change to match socket color and category was already done, but it was missing
versioning code to update the theme on load.
Fixes T83500 (already closed as invalid, but this would solve the non-matching colors)
Reviewed by Hans Goudey (HooglyBoogly)
The SVM AO node calls "scene_intersect_local" with a NULL pointer for the intersection
information, which caused a crash with OptiX since it was not checking for this case and
always dereferencing this pointer. This fixes that by checking whether any hit information
was requested first (like is done in the BVH2 intersection routines).
This is a non-functional change. The functionality introduced in this commit
is not used in master yet. It is used by nodes that are being developed in
other branches though.
Now the gizmo is drawn only when the eventstate located in
`wm->winactive->eventstate` has not changed.
So it doesn't matter if it's "selected" or not.
This commit also removes the use of the private header "wm.h"
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D9539
This is a workaround for T80804.
There's a startup crash that happens on 2.91.0 on Windows, an `EXCEPTION_ACCESS_VIOLATION`
on `atio6axx.dll`. It is triggered by `glClear` on the `detect_mip_render_workaround`
function. The workaround moves the function after the device/driver workaround section and
sets the flag to the affected one to avoid running the check.
It is deprecated hardware that has not meet the minimum requirements since 2.79, but is
still usable and this extends its usability a bit before the cards are finally blacklisted.
Reviewed By: Jeroen Bakker
Differential Revision: https://developer.blender.org/D9667
This patch contains 2 scripts that will help with LTS releases
create_download_urls.py
This python script is used to generate the download urls which we can
copy-paste directly into the CMS of www.blender.org.
Usage: create_download_urls.py --version 2.83.7
Arguments:
--version VERSION Version string in the form of {major}.{minor}.{build}
(eg 2.83.7)
The resulting html will be printed to the console.
create_release_notes.py
=======================
This python script is used to generate the release notes which we can
copy-paste directly into the CMS of www.blender.org and stores.
Usage: ./create_release_notes.py --task=T77348 --version=2.83.7
Arguments:
--version VERSION Version string in the form of {major}.{minor}.{build}
(e.g. 2.83.7)
--task TASK Phabricator ticket that is contains the release notes
information (e.g. T77348)
--format FORMAT Format the result in `text`, `steam`, `wiki` or `html`
Requirements
============
* Python 3.8 or later
* Python phabricator client version 0.7.0
https://pypi.org/project/phabricator/
For convenience the python modules can be installed using pip.
pip3 install -r ./requirements.txt
Differential Revision: https://developer.blender.org/D9055
This reverts commit cbae82ba96.
This change introduced the following problems:
- We could no longer reliably duplicate or use an existing
custom property names.
- We could no longer assume a bone or ID name
can be used in a custom-property.
- Importers that support custom properties (such as FBX)
could fail with an exception creating custom properties.
This was added when Linux's audio support
often needed to be manually configured.
Further 3rd party libraries have their own environment variables & docs
these need not be part of Blender's help message unless they're likely
to be needed to properly run Blender.
Implement improvement from T73139 for merging along edges.
It is now called "Connected" mode, while the default is called "All".
With the recent performance improvement, the Connected Mode is in some
cases only double the speed than the usual merge all strategy but in
other cases it may be even faster. The bottleneck is somewhere further
down the line of merging geometry.
The motivation for this patch came from T80897, because the merging in
complex solidify is making it very slow.
Now merging can be removed from solidify without greater consequences,
as this is just a quicker and more advanced algorithm to do the same
thing that solidify currently does slowly.
Reviewed by: mano-wii, campbellbarton
Ref D8966
When opening a temporary File Browser, we have to make sure the file selection
parameters are refreshed. When opening it in a new Window that would always be
the case, if the File Browser uses a maximized window (as set in the
Preferences), it might reuse space-data from a previous use. So we have to
force the refresh.
Also renamed the relevant function to be more clear about what it's doing.
Mistake in 95b3c4c966.
This just makes sure that the mesh coming out of the subdivision
surface node has correct normals. Ideally, we would lazily compute
derived data like normals in more cases, but that can be solved later.
Correctness is more important right now.
In order to solve this better, it would be nice if functions like
`BKE_mesh_ensure_normals` would take a `const Mesh *`.
The mesh could be considered to be logically const, because
normals are derived data that is only cached for the current
state of the mesh.
Buffer strokes weren't being the excluded from depth only draw calls
so were being included in depth tests. They are now excluded by
bypassing the creation of the buffer strokes.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D9742
OptiX support is not in fact experimental anymore, so it is time for that notice to go.
All Cycles features that are currently supported on the GPU do work now when OptiX is selected.
This enables support for baking when OptiX is active, but uses CUDA for that behind the scenes, since
the way baking is currently implemented does not work well with OptiX.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D9784
* Avoid direct access to `SpaceFile.params`, use a getter instead. This matters
because once the asset-browser changes are in, there will be an alternative
selection parameter object. The getter can return the correct one.
* Rename the function to ensure the parameters. The old name
`ED_fileselect_get_params()` wasn't a mere getter, it would create the
parameters if necessary. Now we have an actual getter, so better be clear.
* In some instances, I replaced the old "get" function with the new mere
getter. So the ensure logic is called less often. However, in these cases we
should be able to assume the selection parameters were created already as
part of the editor creation routine.
The term "active" in the new function names may seem a bit odd in the current
context, but that is a preparation for the Asset Browser merge as well. Like
said, there will be two file selection parameter objects in the space.
Caused problems in the Asset Browser branch when passing an empty path. The
function shouldn't blindly add a slash but sanity-check the input parameters
first.
Also makes NLA tracks and strips overridable.
User can either edit existing strips in existing NLA tracks (but not add or remove them), and/or add new NLA tracks after those comming from the linked data.
Most of the work was as usual checking operators and adding protections against illegal operations in override context.
Note that since we can only rely on indices to deal with local added tracks, we forbid any local track being before any linked/original track.
Maniphest Tasks: T72629
Differential Revision: https://developer.blender.org/D9611
This patch expands on the `is_property_set` doc-string,
detailing the purpose of the `ghost` argument added in
d3bcbe10c2.
Reviewed By: sybren
Ref D9780
It's easier to read and less 'weird' to check that an item is non-local
in a liboverride data-block, than the other way around. Thanks to
@sybren for noticing it.
Updating Industry Compatible keymap for Property filtering and new Modifier behavior.
Differential Revision: https://developer.blender.org/D9765
Reviewed by Julian Eisel
Small improvements to the layout of the Tooltips section in Preferences.
Differential Revision: https://developer.blender.org/D9772
Reviewed by Pablo Vazquez
The transform modes `shrinkfatten` and `seq_slide` have a special way of
handling events.
They use modal events in a different way than expected.
Therefore, this commit adds special event handles for these modes and
removes the keymodal tips from the status bar.
These effects are already described in the header anyway.
If the stroke had zero points the pointer returned NULL.
Also replaced for loop by FOREACH macro.
This is a corner case of "empty" strokes without points.
Change the default for the Show Channel Group Colors preference to OFF.
This option in the user preferences was introduced in rBad85256e7108. It
moved a per-file-per-editor option to the user preferences. As this
option would be frequently turned off by animators, this would now have
to happen only once. This commit takes this one step further, and turns
it off by default, as it can cause major readability issues of the
animation channel list.
RNA collections that support insertion of new items in liboverride
data-block need a special way to distiguish between locale and
orig-from-linked items (since some operations are allowed on the forer,
but no the latter).
In future we want a proper solution to abstract that at the
`BKE_lib_override` level, but for now we need to add some code for each
case.
Note that this commit also fixes a few potential issues with GPencil
modifiers, and constraints, regarding their handling of local overrides.
Fix the Assign Automatic Weights operator in weight paint mode when the
Vertex Groups X option is enabled. This issue was probably introduced in
rB5502517c3c12 where `me->editflag & ME_EDIT_MIRROR_X` was replaced by
either `me->editflag & ME_EDIT_VERTEX_GROUPS_X_SYMMETRY` or
`me->symmetry & ME_SYMMETRY_X`. In this case, the former wasn't working,
so I replaced it with the latter.
Continuation of the work started with 249e4df110. After all display modes
were ported to this new design, this commit starts the (more complex) work on
the individual tree-element types. More concretely it ports animation
tree-elements (action data-blocks, drivers and NLA data).
The commit above explains motivations. In short, we need a better design that's
easier to reason about and better testable.
Changes done here are pretty straight forward and introduce similar class
hierarchy and building patterns as introduced for the display modes already.
I.e. an abstract base class, `AbstractTreeElement` with derived classes for the
concrete types, and a C-API with a switch to create the needed objects from a
type enum. The latter should be replacable with something nicer later on (RAII
based, and type-safer through meta-programming).
Each tree-element type has its own class, with an own header and source file
(okay some closely related types can share a header and source file, like the
NLA ones).
I added some further temporary bits for the transition to the new design, such
as the `TreeElement.type`. It should entirely replace `TreeElement` eventually,
just as `outliner_add_element()` should be quite small by then and easily
replacable by a `TreeBuilder` helper.
Mistake in 35a5dee2ef.
Code would simply assume that the element under the cursor is an Object if it
was an ID (but not a collection).
This wouldn't cause any issues in current code, since the only other ID that
set the direct-data were collections, which are special in that they don't have
a `TreeStoreElem.type` of 0, which is already being checked for here. And if
there was no direct-data set, the object lookup in the View-Layer would
correctly fail too.
I carefully checked and am quite sure for `TSE_ANIMATION_DATA` and
`TSE_NLA_ACTION` the direct-data isn't used at all. This data is stored and
accessed in unsafe ways based on conventions anyway (`void *`). We should aim
for a safer design but it will be difficult to get there. Any removed
complexity will help.
Non-ID tree-elements would cast their data pointer to `ID *` and take the name
and ID-Code from there. The name would actually be overridden a few lines
later, so that didn't cause issues. But the ID-Code stored inside the tree
element kept an undefined value. In practice that probably didn't cause many
issues either, since it's just an undefined value that was very unlikely to
take a valid 16-bit ID-code value, meaning ID-Code checks would simply fail as
they should. Further there typically are other checks to see if the element
actually represents an ID.
However, in theory this may have caused a few random crashes or
data-corruptions.
Modernize loops by using the `for(type variable : container)` syntax.
Some loops were trivial to fix, whereas others required more attention
to avoid semantic changes. I couldn't address all old-style loops, so
this commit doesn't enable the `modernize-loop-convert` rule.
Although Clang-Tidy's auto-fixer prefers to use `auto` for the loop
variable declaration, I made as many declarations as possible explicit.
To me this increases local readability, as you don't need to fully
understand the container in order to understand the loop variable type.
No functional changes.
Blender has now the place to store the Cryptomatte settings. This patch
migrates Cycles to use the new settings.
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D9746
Shared helper function to create a split layout with an alert icon for popup dialogs.
Differential Revision: https://developer.blender.org/D9486
Reviewed by Julian Eisel
New layout for the 'About' dialog featuring the full version of the Blender logo.
Differential Revision: https://developer.blender.org/D9507
Reviewed by Hans Goudey
This feature is intended to generate Microsoft Compiled HTML Help files
which is not something we use/need.
This also fixes an error in generation because the executable cannot be
found.
I didn't actually confirm this is caused by invisible Outliners. But I'm pretty
sure the error happens with Outliners that aren't initialized (so were open in
an area before, but another editor is active there currently).
In that case, the runtime data may not be set yet and that is fine.
Fixes T83420.
No functional changes. This is a few minor cleanups to the remaining C
code for building the outliner tree after parts have been moved to C++.
Differential Revision: https://developer.blender.org/D9741
No functional changes. Code is ported to C++ with additional cleanups to
the logic and variable names.
Differential Revision: https://developer.blender.org/D9741
This way Outliner internal data stays internal, non-Outliner code will not be
able to access and mess with this. Further it allows us to use the real type
(rather than `void *`), change the type to a C++ container if needed and
slightly reduces the size for every Outliner stored in files.
Slightly changed how we set the `SO_TREESTORE_REBUILD` for this, but it should
effectively behave the same way as before.
I could use a 16 bit atomic fetch + AND for D9719. The alternative would be to
turn a `short` into a `int` in DNA, which isn't a nice workaround.
Also adds tests for the new functions.
This patch builds clang-extra-tools on macOS for the
clang-tidy binary. The script "run-clang-tidy.py" is
also harvested because using the `CMAKE_C[XX]_CLANG_TIDY`
option can miss out some files (like makesrna), and using the
script is faster as it does not compile the files.
Thanks to `@LazyDodo` for the base patch D8502.
Reviewed By: LazyDodo, sebbas, #platform_macos
Differential Revision: https://developer.blender.org/D9450
2020-12-04 21:13:15 +05:30
4211 changed files with 210053 additions and 111753 deletions
# Workaround to build sm_30 kernels with CUDA 10, since CUDA 11 no longer supports that architecture
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
