These buffer detailed infos are not needed unless going deep into
perf. profiling, in which case you can still disable this compile option.
This makes user report log much more readable.
We cannot change the texture bind point since the interface count
4/5 textures to bind. Changing the uniform to avoid one bind
make the system thinks one texture is missing.
Avoid this by creating a dummy texture and binding it to the empty
slot.
This is to modernize the API:
- Add meaningful name to all textures (except DRW textures).
- Remove unused err_out argument: only used for offscreen python.
- Add mipmap count to creation functions for future changes.
- Clarify the data usage in creation functions.
This is a cleanup commit, there is no functional change.
This is to have better error detection in debug builds.
This is not a replacement for a full check like in renderdoc but it
might catch some issues early on.
This is a massive cleanup needed for vulkan support T68990. It provides:
- More meaningful enums with conversion functions.
- Less hacky supports of arrays and cubemaps (all considered layered).
- More inline with the stateless design of vulkan and modern GL.
- Methods Fallbacks are using framebuffer functions that are wrapped
instead of implementing inside the texture module.
What is not in there:
- API change.
- Samplers support (breaks a few effects).
This is in preparation of using it to clear single texture.
Also includes minor cleanups about not using tex target in
assert and adding enum operators.
This is going to be unecessary after the GPU opengl texture backend refactor.
For now add a save/restore mechanism to leave the state untouched.
Also remove some calls where the caller would bind to particular binding
point and set the shader uniform.
The "set_expand_from_list_data" function has to be called after updating
the panels' custom data pointers. Otherwise the wrong information is
retrieved in the best base and it will cause a crash in the worst case.
Changing the active object would change the mode, but the necessary
toolsystem update to change the cursor was not run.
Steps to recreate were:
* Duplicate default cube
* Enter sculpt mode with one of the cubes
* Disable Edit > Lock Object Modes
* Select back-and-forth between the objects
Same would happen with other modes.
CMake caches the location of the CRT runtime in the
MSVC_REDIST_DIR variable, and uses it to copy the required
dll's during the install phase.
This variable is only initialized when it does not exist.
Leading to issues when compiler updates are installed and
the compiler version slightly changes, cmake still looks
in the old location for the runtime and warns about the
files not existing.
This change fixes the issue by checking if the redist dir
exists and if not unsets it so InstallRequiredSystemLibraries
can have another go at figuring out where they live.
The current 1D Voronoi implementation for the Distance to Edge option
computes the distance to the cells instead. This patch fixes that and
compute the distance to the edge.
Reviewed By: JacquesLucke, brecht
Differential Revision: https://developer.blender.org/D8634
We do this in a couple of places, so it's worth having the logic wrapped
into a function.
Also, the only way to set the disabled hint for a button from outside of
`interface/` was through `UI_block_lock_set()`/`UI_block_lock_clear()`,
for which the usage isn't obvious when you just try to disable a single
button.
This reverts commit 17905e89a7.
Fix T80429: Transform Tools cannot be cancelled
rB17905e89 better filtered the key items that should appear in the
status bar.
But it is very restrictive since canceling is still possible in other
cases.
# Conflicts:
# source/blender/editors/transform/transform.c
This implements a Face Set Extract operator, which is similar to mask
extract. This operator uses a picker to select and Face Set in the mesh
and extract the geometry directly to a new object.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8599
We have established a convention of exposing the most important
settings from popovers, then aligning a popover to control more
detailed settings.
The file browser has powerful display / filtering settings, but
they're hidden in popovers at the moment, so it's sometimes a pain
to use them. The "display as" options are now exposed to the left of
the display settings popover, and the "filter" toggle is exposed to
the left of the filter settings popover. This convention is familiar
and intuitive for users and makes interaction faster.
Note that the "show hidden" item in the filter popover still has an
effect if filtering is disabled.
This commit also:
- Removes the icons in the "Sort By" enum
- Uses property split for the "Sort By" enum
- Very slightly increases the default width of the file browser
window to make room for the new buttons.
Differential Revision: https://developer.blender.org/D8719
This was doing a matrix inversion per vertex per stroke step and it was
unused.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8791
All brushes except for grab need delta for tip orientation in order to
work with anchored stroke, not only snake hook, which is the one that
needs it always.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8789
This implements the sculpt gesture lasso and box operators for face
sets. They work the same way as the mask gesture operator and tools.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8716
It was possible to increase the text size quite a lot, making text much
bigger than their containing widgets. These new limits makes the maximum
size of text be closer to the widget size.
Note that there needs to be some extra "wiggle room" since fonts may
have quite different glyph sizes. So you can still set the font size to
be slightly bigger than the widgets.
Addresses T80175 and T79059.
Some underlying functionality was not ready for greasepencil:
- BKE_modifiers_get_virtual_modifierlist (now introduce dedicated BKE_gpencil_modifiers_get_virtual_modifierlist)
- BKE_modifiers_is_deformed_by_armature
- checks in drawing code
- checks in (pose) selection code
A couple of changes to make this work:
- `eGpencilModifierType_Armature` has to be respected (not only `eModifierType_Armature`)
- `OB_MODE_WEIGHT_GPENCIL` has to be respected (not only `OB_MODE_WEIGHT_PAINT`) -- (now use new `OB_MODE_ALL_WEIGHT_PAINT`)
- `gpencil_weightmode_toggle_exec` now shares functionality from `wpaint_mode_toggle_exec` -- moved to new `ED_object_posemode_set_for_weight_paint`
This patch will also set the context member "weight_paint_object" for greasepencil (otherwise some appropriate pose operators wont work when in weightpaint mode)
Reviewed By: campbellbarton
Maniphest Tasks: T63125
Differential Revision: https://developer.blender.org/D8483
Condition was flipped, would allow actions on constraints coming from
library, but prevented actions on local constraints.
Mistake in rBS0b49fdd0ee0.
Maniphest Tasks: T80391
Differential Revision: https://developer.blender.org/D8793
This change doesn't impact release builds,
in general avoid having defaults depend on build options
since it means files from different builds won't match.
The Snake Hook deformation mode was using the same strength as grab (not
supporting pressure), but this deformation mode supports pressure.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8724
All filters were using prevclicx, which is in screen coordinates and
mval[0], which is in region coordinates to get the filter strength.
This fixes the issue in all filters.
Reviewed By: Severin
Maniphest Tasks: T80311
Differential Revision: https://developer.blender.org/D8776
For modifier shortcuts we added a "custom_data" field to panels.
This commit uses the same system for accessing the list data that
corresponds to each panel. This way the context is only used once
and the modifier for each panel can be accessed more easily later.
This ends up being mostly a cleanup commit with a few small changes
in interface_panel.c. The large changes in the UI functions are due
to the fact that the panel custom data is now passed around as a
single pointer instead of being created again for every panel.
The list_index variable in Panel.runtime is removed as it's now
unnecessary.
Differential Revision: https://developer.blender.org/D8559
Blender tried to free objects twice from the bullet world sometime.
First we would implicity remove all objects when recreating the bullet
world and then explicity try to remove them again from the now empty
world.
This would wouldn't crash older bullet versions, but the recent versions
will as we will try to free objects that no longer exists in the bullet
world.
Also clear the cache on deletion as the object order changes.
Fix T77181: The cache clearing will fix this issue.
Continuing the work from D8326, this commit adds a property split
layout to the add torus operator. It also puts the properties common
to all object add operators at the bottom for consistency.
Differential Revision: https://developer.blender.org/D8748
This change enables the developer option `WITH_CYCLES_NATIVE_ONLY`
for MSVC. This allows a developer to just build the cycles
CPU kernel for their specific system rather than all kernels,
speeding up development.
Other platforms have had this option for years, but MSVC lacks
the compiler switch to target the host architecture hence it
always build all kernels.
This change uses a small helper program to detect the required
flags.
Only AVX/AVX2 are tested, for the following reasons
- SSE2 is enabled by default and requires no flags
- SSE3/4 have no specific build flags for msvc
- AVX512 is not yet supported by cycles
Differential Revision: https://developer.blender.org/D8775
Reviewed by: brecht, sergey
The animated objects was not updated for each internal substep for the rigidbody sim.
This would lead to unstable simulations or very annoying clipping artifacts.
Updated the code to use explicit substeps and tie it to the scene frame rate.
Fix T47402: Properly updating the animated objects fixes the reported issue.
Reviewed By: Brecht, Jacques
Differential Revision: http://developer.blender.org/D8762
This patch moves the EEVEE depth of field shaders to eevee_shaders.c and
adds them to the eevee shaders test suite.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D8771
There was no way to reset the current file to factory settings
without reloading the preferences (which disables & re-enables add-ons),
this slows down resetting files and can complicate tests.
- Use WM_operatortype_description to get the operator description.
- Pass properties to WM_operatortype_name,
so the operator name callback is used.
- Add UI_but_operatortype_get_from_enum_menu function
to access the operator from enum menus.
- Change WM_operatortype_description to return NULL when there is no
description, use WM_operatortype_description_or_name
when either can be used.
This function was called when the modifier list changes and the panel
list has to be rebuilt. Originally I thought it was necessary to to remove
the block immediately when the panel was removed, but we can just
leave it and it will be removed later in the UI drawing process.
Removing this results in fewer string lookups.
Before, Cycles was using a shared Embree device across all instances.
This could result in crashes when viewport rendering and material
preview were using Cycles simultaneously.
Fixes issue T80042
Maniphest Tasks: T80042
Differential Revision: https://developer.blender.org/D8772
Recompute Rest Length stored in the StretchTo constraint after applying
the current pose as rest pose.
The "Apply Pose as Rest Pose" operator applies the evaluated pose as
rest pose, which means that the change in bone length from the StretchTo
constraint is applied to the rest pose. The bug was caused by the fact
that the StretchTo constraint wasn't updated for the new pose, and thus
still applied the same scale factor to the new pose, effectively
doubling its effect.
The "Apply Pose as Rest Pose" operator now forces a recompute of the
rest length cached in the StretchTo constraint data. As a result, the
length of the bone before and after the pose is applied remains the
same. The X and Z scale (perpendicular to the bone length) are reset to
1.0, as with the applied pose the bone isn't stretched or squashed any
more.
Remove the hack for library initialisation; this is no longer necessary
as the required information can be passed to the USD library after its
static initialisers have run.
This new approach is compatible with both the patched and original USD
library. This means that platform maintainers don't need to rebuild the
USD library until the next upgrade.
Manifest Task: https://developer.blender.org/T80320
Initialize the USD library when used (instead of at startup), so that
this can happen inside the IO/USD module. This makes calls to the USD
library local to Blender's USD code.
Note that failure to find the USD JSON files will now only be reported
when the USD exporter is used, and not on every startup of Blender.
This is the first step in cleaning up the way Blender patches and
initialises the USD library.
Manifest Task: https://developer.blender.org/T80320
Steps to reproduce were:
* Open Sequencer, add a sound strip
* In the sidebar, open the Adjust > Sound sub-panel
* Note the placement of the "Mono" item
The layout code would disable decorators if a property came from a
non-animatable data-block type. Doing so would mess up the alignment
where properties from different data-block types were be mixed.
This is not the case any more.
Note that when actually adding the decorator, a blank icon is inserted
to keep the alignment intact when the data-block type isn't animatable.
So the decorator is still not shown, but the alignment looks fine.
This may affect more cases. If so, and if that's an issue, the
decorators should be explicitly disabled.
This improves circles AntiAliasing, and line antialiasing.
This keeps the old drawing method (3d spheres) for the selection pipeline.
This was suggested by @harley on devtalk.
If the search menu was used for a string property, and a data-block was
selected from the search, the value set would be an invalid name. The
property would get the modified UI string, not the proper data name set.
This problem was already once solved in rB249ccab111ac, but resurfaced
in rB937d89afba36.
Now only use the modified UI string if requires_exact_data_name is not
true.
Note: the comments in rB249ccab111ac [reg. library hints and string
properties, also that pointer properties are preferred over string
properties when dealing with IDs] still apply.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D8759
(cherry picked from 2.90 commit
cb0b0416f4)
Keymaps must be customized by the user.
But this is not the case for hardcoded keymaps.
Also the repetition of hardcoded and user-defined keyitems may induce
the user to think they have made a mistake or it is a bug.
Differential Revision: https://developer.blender.org/D6454
Now that we use internal state info, we require drawing that uses the
GPU api to use it throughout the whole pipeline. This is in order to
track the GL state and do our own error checking.
Because depsgraph isn't rebuild for animated properies, we have to
assume that active bodies will always want to have updates from the
rigidbody simulation.
Calling: bpy.ops.wm.read_homefile(use_empty=True)
exposes invalid user-counts in versioning code.
Simplified logic for assigning materials in versioning code.
Caused by 29f3af9527.
- Direct assignment caused ID user counts to be invalid.
- The first palette would always be used,
even when the named palette searched for was found.
Also pass 'const' string to `hex_to_rgb`, avoid casting to 'non-const'.
Now the callbacks are setup for each debug context.
The formating has been reworked to be less verbose and make errors
and warnings stand out from the notifications.
Errors are most of the time sufficiently explicit in their message.
This also remove the support for AMD_debug_output which is 10 years old.
This is related to the Vulkan port T68990.
After discussion with @howardt, it seems the solver property should
always be exposed, even in lite builds. This commit removes the
ifdefs for that property and adds a warning if the "Exact" solver is
used when Blender is compiled without GMP.
These changes apply to the boolean modifier as well.
Delete `hdf5.diff`, because it's no longer used. Since Blender 2.90 the
optional support for HDF5 has been dropped, but this file accidentally
wasn't deleted.
See 0102b9d47e and 0c38436227.
No functional changes.
Now we have a better distinction of what is snap to grid and what is
snap to increments.
The code also allows the implementation of mixed snap for these modes.
This is part of the Vulkan backend task T68990.
This is mostly a cleanup, however, there is a small change:
We don't use a special Vertex Array binding function for Immediate
anymore and just reuse the one for batches.
This might create a bit more state changes but this could be fixed
easily if it causes perf regression.
# Conflicts:
# source/blender/gpu/intern/gpu_context.cc
Problem: the Blender synchronization process creates and tags nodes for usage. It does
this by directly adding and removing nodes from the scene data. If some node is not tagged
as used at the end of a synchronization, it then deletes the node from the scene. This poses
a problem when it comes to supporting procedural nodes who can create other nodes not known
by the Blender synchonization system, which will remove them.
Nodes now have a NodeOwner, which is set after creation. Those owners for now are the Scene
for scene level nodes and ShaderGraph for shader nodes. Instead of creating and deleting
nodes using `new` and `delete` explicitely, we now use `create_node` and `delete_node` methods
found on the owners. `delete_node` will assert that the owner is the right one.
Whenever a scene level node is created or deleted, the appropriate node manager is tagged for
an update, freeing this responsability from BlenderSync or other software exporters.
Concerning BlenderSync, the `id_maps` do not explicitely manipulate scene data anymore, they
only keep track of which nodes are used, employing the scene to create and delete them. To
achieve this, the ParticleSystem is now a Node, although it does not have any sockets.
This is part of T79131.
Reviewed By: #cycles, brecht
Maniphest Tasks: T79131
Differential Revision: https://developer.blender.org/D8540
This was caused by a double lock of the DRW context mutex.
This changes the logic a bit by releasing the DRW context before rendering
with BKE_sequencer_give_ibuf and restoring it after.
Critical fix for 2.91
Reviewed By: dfelinto
Differential Revision: https://developer.blender.org/D8657
Instead of calculating exact normals for all faces, just do it
for those that potentially intersect. A big improvement for dense
meshes that only intersect in relatively few places.
These were disabled in the newboolean merge commit.
This commit renables them, using the original 'FAST' solver
so that the result objects need not change.
A TODO to add more tests using the 'EXACT' solver,
though most functionality there is now covered by unit gtests.
This was affecting Mesa drivers as well as AMD pro driver. But it
might have been noticeable on other config too.
This was introduced by rBa9f2ebb21508.
This way it is way clearer what each viewport state is. There is
no more save and reset. The scissor test is also saved per
framebuffer.
The only rule to remember is that the viewport state (size and
origin) is reset for both the viewport and scissor when a texture
is attached or detached from an attachment slot.
This is related to the Vulkan port T68990.
This is a full cleanup of the Framebuffer module and a separation
of OpenGL related functions.
There is some changes with how the default framebuffers are handled.
Now the default framebuffers are individually wrapped inside special
GLFrameBuffers. This make it easier to keep track of the currently bound
framebuffer state and have some specificity for operations on these
framebuffers.
Another change is dropping the optimisation of only configuring the
changed attachements during framebuffers update. This does not give
any benefits and add some complexity to the code. This might be brought
back if it has a performance impact on some systems.
This also adds support for naming framebuffers but it is currently not
used.
This is in preparation of the Framebuffer GL backend.
This is a just changing types and moving some code.
No logic is changed... almost... it just removes the context attach.
i.e: `gpu_context_add/remove_framebuffer()`
This is not needed for now and was even disabled in release.
This is part of T68990.
Use this utility function for render-shading & weight paint modes.
This adds support for edit-mode & pose-mode where all objects in the
mode are used in this case instead of the selected objects.
Useful to perform cleanup operations on many objects at once,
also these operations weren't accessible from the search menu.
This follows the convention for other clean up menus
when editing mesh, curve & grease-pencil.
Resolves issues raised in T80011
This is useful to run in object-mode, instead of from the property editor,
note that this still only used the current object when activated from
the property editor.
This is useful to run in object-mode, instead of from the property editor,
note that this still only used the current object when activated from
the property editor.
The code that found coplanar clusters was not updating a bounding box.
Also, code that was detecting non-trivial coplanar intersects was
slightly wrong, but that would not have caused any functional problems.
This was added in 1cb7267a9f, however the behavior before this
would have failed on negative values already.
Also negative values here would fail in many other places.
Properties that display conditionally depending on other properties
should generally be lower down so the movement of buttons as
settings are tweaked is less intrusive.
This patch fixes assert on grid drawing. `for` loops are used instead
of `while` loops to make sure the number of lines is exact. The old
code draws lots of unnecessary lines offscreen. This bug is fixed as
well. See the patch for a comparison without a scissor test.
Differential Revision: https://developer.blender.org/D8745
Use correct text color when syntax highlighting is off but line numbers are on.
Differential Revision: https://developer.blender.org/D7337
Reviewed by Hans Goudey
Display negative zero floats as regular zero. Does not alter underlying value.
Differential Revision: https://developer.blender.org/D4795
Reviewed by Brecht Van Lommel
At first sight this code should not build at all
but due to the use of macro's that look like functions
this seemingly has no issues building.
Clang-format alerted me to this strange bit of code
by placing the `if` on it's own line for some reason.
added the missing brackets, and clang-format is happy
again.
`ssize_t` is not a standardized type (it's a posix type)
given the line in question here is calculating the size
of a memory allocation there's no logical way this
should ever be negative.
I do not know this code too well and was unsure if
`mdverts->totweight` could ever be < 0, so I protected
it with a clamp, just in case.
This is for design task T67744, Boolean Redesign.
It adds a choice of solver to the Boolean modifier and the
Intersect (Boolean) and Intersect (Knife) tools.
The 'Fast' choice is the current Bmesh boolean.
The new 'Exact' choice is a more advanced algorithm that supports
overlapping geometry and uses more robust calculations, but is
slower than the Fast choice.
The default with this commit is set to 'Exact'. We can decide before
the 2.91 release whether or not this is the right choice, but this
choice now will get us more testing and feedback on the new code.
Problem is again with the embedded data, we want to make those local
together with their owner ID, but sometimes we are actually dealing with
copies here, which are inheritently already local.
Code did not considered that possibility before, leading to access to a
NULL `lib` pointer.
This should also be back-ported to 2.83 LTS release.
Maniphest Tasks: T80104
Differential Revision: https://developer.blender.org/D8731
The CPP Shader class does not initialize the interface attribute.
What will crash when deleting the shader.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D8740
We need to have transforms from passive objects if they are animated or
driven by parent relations. This is not immediately obvious as the
object transform matrix will still be available, it is just one frame
behind in some cases.
Fixed dependency cycles if there is a constraint between two rigid
bodies. Because bullet keeps track of its simulated bodies, we do not
need to supply objects transforms as bullet should already have them.
I need combine these two fixes because otherwise we will get depsgraph
warnings that nodes are missing that it expects to be there.
Reviewed By: Sergey, Jacques
Differential Revision: http://developer.blender.org/D8732
Issue was with our dear posebones again... when applying overrides we
keep the same address/pointer for the IDs themselves, (which avoids us
the need to remap their usages), but their inner data is often
re-allocated.
Therefore, we need once again to go over armature objects and invalidate
their posebone pointers.
This should also be back-ported to Blender LTS 2.83.
Maniphest Tasks: T80078
Differential Revision: https://developer.blender.org/D8734
A test case that compiles all the GLSL shaders for workbench, gpencil, overlay and some
of eevee. Compilation is still platform dependent, but when run on a test-farm
with different hardware we will be able to detect GLSL compilation
errors early on.
The test will be compiled when `WITH_GTEST` and `WITH_OPENGL_DRAW_TESTS`
are On.
For eevee only the shaders inside eevee_shaders.c are included. EEVEE has some shaders
located inside the submodule. They aren't accessible to the outside and aren't added
to the test case. We should see how we want to add them. For the test cases it is better
to move them to eevee_shaders.c, but for eevee perspective it is better to keep them in
the submodule. Keeping them in the submodule could lead to situations that is harder to test.
as the shader could already have been initialized.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D8667
There were some missing UBO bindings, what asserted in debug mode.
This patch fixes this by binding the missing UBO's
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D8742
In recent refactoring {a9f2ebb21508} an issue was introduced that the
opengl rasterizer would be disabled when only writing to a stencil
buffer.
This fix adds stencil writing to the write mask and set it. This makes
the write map not evaluate to GPU_WRITE_NONE and the rasterizer will be
enabled in `GLStateManager::set_write_mask`.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D8743
The CPP Shader class does not initialize the interface attribute.
What will crash when deleting the shader.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D8740
Caused by rB49f59092e7c8: Curves: Implement Handles for selected points
only
Changes from deselecting all were not considered as changes anymore.
Maniphest Tasks: T80182
Differential Revision: https://developer.blender.org/D8744
This is part of T76372.
It adds the `blend_write`, `blend_read_data`, `blend_read_lib`
and `blend_read_expand` which correspond to the various
steps when reading and writing .blend files.
Having these callbacks allows us to decentralize the blenloader
code a lot more. This has the affect that code related to any
specific ID type is less scattered.
Reviewers: mont29
Differential Revision: https://developer.blender.org/D8670
We forgot to update this code as part of D3108. I'd like to include this in 2.90,
it's entirely broken now so can't really get any worse.
Differential Revision: https://developer.blender.org/D8738
More localized variables, avoid ugly 'offset by one' index usage in
favor of explicit `INDEX_UNSET` define, etc.
No behavior change expected from this commit.
Checks to preserve the active spline on duplication
required an active vertex too.
Now having no active vertex doesn't prevent duplicate
from keeping the spline active.
Reviewed by: @mano-wii
Ref D8729
Left walk navigation while the scene collection is active would collapse
the subtree which shouldn't be allowed. This adds another check to
`outliner_item_openclose` to prevent collapsing the scene collection.
Introduced in rBb077de086e14.
Because the subtrees in Data API mode are empty for performance reasons,
it was impossible to move through the tree with walk navigation. This
adds an exception to allow walk navigation to expand subtrees in that
mode.
custom split normals data
Clearing custom split normals would get rid of the CD_CUSTOMLOOPNORMAL
layer - but editing data `lnor_spacearr` would be kept.
Adding a CD_CUSTOMLOOPNORMAL layer (if none exists yet) should be done
in `edbm_average_normals_exec` / `BKE_editmesh_lnorspace_update` /
`BM_lnorspace_update` / `BM_lnorspacearr_store`. The thing is that if
the editing data `lnor_spacearr` would still be valid after `Clear
Custom Split Normals Data`, blender would happily call
`BM_lnorspace_rebuild` instead. Doing that without a CD_CUSTOMLOOPNORMAL
layer is asking for trouble.
Now clear lnor_spacearr on `Clear Custom Split Normals Data` as well.
Thx @mont29 for feedback here.
Maniphest Tasks: T80159
Differential Revision: https://developer.blender.org/D8730
Currently the panel handler loops through every block and every button
for every single panel. This commit moves that check to happen a single
time at the beginning.
We need to only collapse or expand the first panel under the cursor
rather than all of them. Note that whether the parent panel or
the subpanel is first depends on the order of the uiBlocks in the
region's list.
The code for handling panel events was much more complicated than it
needed to be. This commit removes some unecessary function calls and
variables, reduces indentation levels by returning early, and does
some other general cleanup.
Somehow the panel category drawing functions ended up in the middle
of the region event handling code. This commit moves them to their
own section next to the rest of the drawing code.
If a different object was active, clicking on a linked armature's pose
in the Outliner would enter Pose Mode for it.
This would actually cause a failed assert, but in release builds the
armature would just enter pose mode.
Steps to reproduce were:
* Link in armature object
* Activate a different object
* In the Outliner, un-collapse the armature object
* Activate Pose Mode by clicking on its pose there
MSBuild on windows currently spews a warning about
buildinfo.h_fake not being generated.
For build info we use a non existing file to trigger a
custom_command on every build, which has worked well for
years now, however in recent versions of MSBuild it has
started issuing warnings about files that should be
generated but are not.
CMake is actually aware of this being a problem and states
in the documentation that "If the output of the custom command
is not actually created as a file on disk it should be marked
with the SYMBOLIC source file property."
This change fixes the build warning by properly marking the
buildinfo.h_fake as symbolic resolving the warning.
Need to make sure node factories are initialized prior to the dependency
graph allocation.
The regression was initially introduced in 5b021dff41
Thanks Brecht for testing!
It is now possible to build against a shared embree library.
Before it was only possible to build against static Embree libraries.
Reviewed By: Brecht
Differential Revision: http://developer.blender.org/D8702
MSVC already builds with the /std:c++17 flag but for
'reasons' [1] MSVC still gives the wrong value for the
__cplusplus define.
This change sets an additional cxx flag on supported
compilers to allow the compiler properly identify
C++17 support.
This resolves 2 warnings coming out of bullet about
the register keyword being deprecated.
[1] https://devblogs.microsoft.com/cppblog/msvc-now-correctly-reports-__cplusplus/
OSL requires RTTI to be off, this is done with the /GR- flag for
MSVC, however /GR is in the default CXX flags leading to warning
D9025 : overriding '/GR' with '/GR-'
which cannot be suppressed.
/GR is on by default and this flag is not required, so removing
it from the default CXX flags makes it possible later use /GR-
without generating warnings.
The changes in rB70151e41dc02 broke subtree expansion in the Data API
display mode because the closed subtrees are empty lists. Move the empty
subtree check from `outliner_item_openclose` to the walk navigation
code to prevent the issue.
`IDTypeForeachCacheFunctionCallback` lists the `flags` parameter
as `uint`, having these functions use `eIDTypeInfoCacheCallbackFlags`
results in the following warning when building with MSVC:
warning C4028: formal parameter 4 different from declaration
This change resolves this warning by changing the parameter to
the appropriate type.
The outliner already uses the alternating row theme color as an
overlay for every other row. This uses the same color for the file
browser, instead of a hardcoded shading.
The file browser background color is slightly tweaked to match the
outliner, and the Blender Light theme is updated to use a lighter
background color like the outliner.
Reviewed by: Hans Goudey, Julian Eisel
Differential Revision: https://developer.blender.org/D8717
This adds a new `--debug-exit-on-error` flag. When it is set, Blender
will abort with a non-zero exit code when there are internal errors.
Currently, "internal errors" includes memory leaks detected by
guardedalloc and error/fatal log entries in clog.
The new flag is passed to Blender in various places where automated
tests are run. Furthermore, the `--debug-memory` flag is used in tests,
because that makes the verbose output more useful, when dealing
with memory leaks.
Reviewers: brecht, sergey
Differential Revision: https://developer.blender.org/D8665
when you call the BLI_array_free macro with a const pointer you get a
warning when the macro calls `MEM_freeN` (warning C4090: 'function':
different 'const' qualifiers)
This was warning originating from
`smart_uv_project_calculate_project_normals` in `uvedit_unwrap_ops.c`
Normally we resolve these with a non const cast at the callsite
but given BLI_array_free is a macro not a function this is not
an option here and it has to be resolved in the macro.
Since the switch to TBB, the threads value specificies the maximum number of
CPU cores used while rendering, it is not longer possible to use more threads
than cores. Change the tooltip to make this more clear.
The `ctrl` key was mapped to recursive bone selectable and visibility
toggling. This changes the key to `shift` to be consistent with objects
and collections. Also adds an explanation to the tooltip.
Part of T77408
Differential Revision: https://developer.blender.org/D8650
Previously the left and right arrow keys would close and open the active
tree element, but a subsequent key press would not select up or
down the tree as is common in tree-based interfaces.
Walking left and right now does a selection action after opening or closing
the active tree item. For example, a right key press on a closed element
will open it's subtree, and an additional right key press will select
the first child element.
A left key press anywhere in a subtree will first close the active
element if it's subtree is expanded. Walking left again will select the
parent element.
Part of T77408
Differential Revision: https://developer.blender.org/D8650
The main CMakeLists.txt specifies C++17, quadriflow tries to add C++14
flags leading to the following warnings when building with MSVC
Command line warning D9025 : overriding '/std:c++17' with '/std:c++14`
This change removes the C++14 flags, and fixes a build error caused
by the removal of `std::unary_function` in C++17 in the .obj loader
(which isn't used by blender)
Reviewed By: zeddb
Differential Revision: https://developer.blender.org/D8720
For bullet we compile at /W0 for MSVC but we did not
remove the standard /W3 flag. Leading to the following
warning:
Command line warning D9025 : overriding '/W3' with '/W0'
This change removes the W3 flag for bullet to get rid
of the warning.
When Blender is started in fullscreen mode from the command line,
or if the fullscreen state is saved in the startup file, all temporary windows
will also open in fullscreen mode. When closing the fullscreen File Browser,
Blender would either crash or parent window becomes black.
This does not happen if the Blender switches to full screen manually.
`NSWindowCollectionBehaviorFullScreenPrimary` should be set for windows that
can enter full-screen mode. Otherwise macOS will turn the wrong window into
full-screen.
Similar fix: rB4b39de677d20
Differential Revision: https://developer.blender.org/D8708
Reviewed by: Julian Eisel
This refactors Box Mask and Lasso mask making both functions share the
same code. After this change it should be easier to add new
functionality, new gesture tools or implement new gesture modes.
No functional changes.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8707
Use BKE_mesh_wrapper API access to access mesh coordinates
for modifier evaluation.
Call BKE_mesh_wrapper_ensure_mdata when binding
since it's a one off operation.
Regression from deaff945d0.
Reviewed by: @brecht
Ref D8709
This was an oversight in rB83e3d25bcae3.
Basically we still have the "hair" and "point_cloud" entries for the
context. However they were ifdef'ed.
Note this would mostly happen in 2.90 since we always build without hair
and particles there.
Differential Revision: https://developer.blender.org/D8712
- Cycling between part of the boundary & the entire UV boundary.
- Include pole vertices in the selection.
Edge loop selection was rewritten to use BMesh connectivity data.
Further changes to interface_handlers.c to avoid a block of variable
declarations at the beginning of functions. Also use const in some
situations. I only made changes where the variable's intended scope
was obvious.
- Reduce variables scope
- Use some const prefixes
- Initialize variables at declaration
- Use comparison to boolean false instead of 0
Differential Revision: https://developer.blender.org/D8678
This fix a GL_INVALID_VALUE error on startup due to 0.0f max line width.
Also moves the max anisotropy filter to the sampler creation.
This reduces code fragmentation.
Grease pencil modifiers already had defined outliner icons, but had
never been included in the tree. This adds the modifiers and the shader
effects to the tree.
Part of T68498
The previous fix loaded the pixels so existing tiles were not overwritten.
However the Cycles render buffer is expected to be scaled by the number of
sample, which was not taken into account.
This is not ideal in that previews could have a mismatched number of samples
between multiple objects, though the result will be correct. The better solution
would be to bake all objects together per tile, rather than one after the other.
But that is a bigger change than we can do in 2.90.
Differential Revision: https://developer.blender.org/D8704
This prevents UV layer mix up in
MeshBatchCache.cd_used/cd_needed/cd_used_over_time which depends on the
extraction method.
One object's mesh can be accessed with MR_EXTRACT_MESH, another object
that uses the same mesh can use MR_EXTRACT_BMESH based on
(Object.mode & OB_MODE_EDIT), this causes a problem as the edit-mesh
and the mesh aren't always in sync, the custom data layers wont
necessarily match up, causing T77359.
Reviewed by @jbakker, @brecht
Ref D8645
This should not cause any problem since the depth test is required
in order to draw to the depth buffer and this is not altered by
this change.
To be on the safe side, we still restor the mask after altering it.
This workaround addresses T79533 and T79038 for Blender 2.90. The
solution isn't clear and needs more research and work. In order to
continue with blender 2.90 release it was proposed to add this work
around.
It has been tested with the test files provided in the reports.
Reviewed By: Dalai Felinto, Clément Foucault
Differential Revision: https://developer.blender.org/D8695
This workaround addresses T79533 and T79038 for Blender 2.90. The
solution isn't clear and needs more research and work. In order to
continue with blender 2.90 release it was proposed to add this work
around.
It has been tested with the test files provided in the reports.
Reviewed By: Dalai Felinto, Clément Foucault
Differential Revision: https://developer.blender.org/D8695
Use invert_m4_m4_safe_ortho when joining objects so zero scaled axis
doesn't cause all points to be scaled to zero.
Instead geometry is left un-scaled on degenerate axes.
Report a warning in this case since users may want to adjust the
active objects scale.
Unlike invert_m4_m4_safe, this calculates zeroed axes.
Useful when we need to use the inverse of an objects matrix,
keeping the valid axis, only filling in the zeroed ones.
This implements Snake Hook as a deform type for the cloth brush. This
brush changes the strength of the deformation constraints per brush step
to avoid affecting the results of the simulation as much as possible. It
allows to grab the cloth without producing any artifacts in the surface
and create more natural looking folds than any of the other deformation
modes.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8621
In 2.83 and previous versions there was a bug that was causing boundary
vertices to be detected incorrectly that was preventing the smooth brush
to work on boundaries if there was a pole on them.
In 2.90 the boundary vertex detection was fixed, but it was still using a
simplified version of the algorithm without any boundary smoothing. This
patch implements a similar smoothing algorithm to what I think it was
the intention of 2.83 and previous versions, but working correctly.
Reviewed By: sergey
Maniphest Tasks: T80008
Differential Revision: https://developer.blender.org/D8680
This is quite embarassing... it was returning the base instance instead of
the correct vao. No wonder that it was causing crash and at most drawing
issues.
This skips the subdivision operation if the mesh has no loops, avoiding
the crash.
Reviewed By: sergey
Maniphest Tasks: T80039
Differential Revision: https://developer.blender.org/D8696
The return value of scene_intersect must be checked, the isect struct members
can't be assumed to be initialized if that returns false.
Differential Revision: https://developer.blender.org/D8692
The problem occurs when a deforming modifier is added to the object
after the MeshSequenceCache modifier. We should only consider the cached
velocities if the MeshSequenceCache modifier is the last one on the
object and we also need to check for the correct vertex count before
adding the motion vertex attribute.
Ensure that time source always is in the dependency graph, allowing to
tag the graph for time update prior it was fully built.
Collaboration of Philipp Oeser, Jacques Lucke and myself.
Thanks everyone :)
`TH_UV_OTHERS` is a theme option that isn't hooked to anything since
blender 2.80. This patch will remove the option and related code.
Reviewed By: Campbell Barton
Differential Revision: https://developer.blender.org/D8669
The code uses OpenGL functionality, so is to be linked against
OpenGL libraries.
This makes it easier to integrate with cycles using CMake.
Differential Revision: https://developer.blender.org/D8371
This was caused by motion blur camera movement tagging the view as
invalid and thus resetting the temporal sampling.
Critical fix for 2.90. Need second look, but quite confident. This function
is only called once when Motion blur is off.
Reviewed by: jbakker
Differential Revision: https://developer.blender.org/D8676
This operator is dependent on mouse position (if the Use Cursor Position
option is used). The Channel property is irrelevant/unused in this case.
So it is not optimal displaying this property when calling this from the
menu (or even using the shortcut with default settings).
Now use a custom UI in the Adjust Last Operation panel in this case.
The properties are now drawn in relation to another then (Channel
underneath Use Cursor Position) next to some other minor layout
improvements.
Thx @HooglyBoogly for feedback (also providing UI code)
Maniphest Tasks: T79872
Differential Revision: https://developer.blender.org/D8625
This replace `GPU_clear()` by `GPU_clear_color()` and `GPU_clear_depth()`.
Since we always set the clear value before clearing, it is unecessary
to track the clear color state.
Moreover, it makes it clearer what we clear the framebuffer to.
When the OSL_ROOT variable is set this is ignored
by findpackage on cmake < 3.12. CMake 3.12 and up
also ignore it and warn about it. This change
tells cmake it is OK to use the variable and
stop warning
This changes the state of occlusion queries quite a bit. Now scissors is
explicitely disabled and we enabled color write.
I still don't understand why we now need this. This patch is just trial and
error on an affected setup. Note that on the same computer, renderdoc
was not able to capture the regression (the regression did not manifest
during capture).
Regression likely introduced by rB5f414234ddea
Mistake in b077de086e. I did the same fix for a few operators there,
but missed the object "Join" one.
The joining operator changes the layer content. So it must send a
notifier for that.
Before b077de086e that didn't cause a noticeable issue, because the
Outliner happened to listen to other notifiers (active/selection
changes) the operator sent and fully rebuilt its tree in response. Now
missing these notifiers can be more problematic, since we try to avoid
more rebuilds.
Added comments to the notifier types to avoid at least this pitfall.
Since stone age of lib_query, the code would iterate over the current
list of active sequences (from a meta strip e.g.), and not over the
whole list of those.
This is a critical issue as it means in some cases (editing a meta strip
typically), some ID pointers would be missed/ignored by this foreach
looper, which is now at the center of most of our ID management code.
This caused a bug here at the studio, leading to loss of all sound IDs
used by sound strips when editing and undoing inside a meta strip, since
ID refcounting would not happen properly on strips using sounds outside
the meta-strip context during file reading of the undo steps.
To be backported to 2.83.
Differential Revision: https://developer.blender.org/D8671
This is in preparation of vulkan backend. We move all opengl
functionnalities behind an abstract class.
This also cleansup the "dynamic" ubo create and rename it to
`GPU_uniformbuf_from_list()`
Contains, no functional change.
Part of T68990 Vulkan support.
This follows the GPU module naming of other buffers.
We pass name to distinguish each GPUUniformBuf in debug mode.
Also remove DRW_uniform_buffer interface.
Remove `exec()` and `eval()` calls from `WM_OT_properties_edit` where
possible. This not only results in simpler, cleaner code, but also
removes the necessity for `repr(value)` to evaluate to a Python
expression that in turn evaluates to `value` again.
No functional changes.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D8658
Split the depsgraph allocation into a separate function
`BKE_scene_ensure_depsgraph()`. Parameters are only passed to those
functions that actually need them. This removes the the "if that boolean
is `false` this pointer is allowed to be `NULL`" logic and more cleanly
decouples code.
No functional changes.
Reduce nesting by flipping conditions and returning early. It's now much
clearer that it's actually a linear function (rather than a nested one).
No functional changes.
For the sanity checks to work we don't actually need to check other
scenes. So this function can be simplified so that it does not require
a `Main *`.
Mistake in 5cc08510e0.
- Use const in some places where applicable
- Use consistent variable names in some places
- Use "r_" prefix for return arguments
- Declare variables in smaller scope where they are used
We can avoid the rather expensive outliner tree rebuilds and only redraw
if nothing but the selection or active item changes. This should give a
bit of speedup for heavy scenes.
For this to work I had to correct a few notifiers, some were only
sending selection/active change notifiers that actually did things like
adding objects. I also added a more precise notifier type for when the
active collection changes. At the notifier subtype/action level we're
not even close to running out of bits, so this should be fine.
Also had to correct a wrong notifier check (was using `&` rather than
`==`).
Code dealing with object copy of master collection was bugy in case one
of the new object copy would get a name lesser than the original object,
leading to new copy being inserted before original one in lists.
Maniphest Tasks: T79931
Differential Revision: https://developer.blender.org/D8656
Allow adding keys outside of the NLA strip, when Sync Length is
activated. Before this, an animator would have to exit tweak mode,
adjust the strip length, then enter tweak mode again.
Now the animator can freely insert and modify keys outside of the strip
bounds. They will never have to touch the strip bounds directly.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D7533
This moves the allocation for filter to separate functions, removes all
repeated calls to RNA_enum_get an fixes some other code quality issues.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8639
This updates the view navigation origin after modifying the pivot
position.
Reviewed By: sergey
Maniphest Tasks: T79924
Differential Revision: https://developer.blender.org/D8632
Cloth deform brushes (both in cloth brush or other tools with cloth
simulation targets) should not have their spacing as a value relative
the brush radius to avoid affecting the simulation speed when changing
the brush radius.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8620
This adds the orientation modes to the Cloth Filter.
Similar to the mesh filter, they set the orientation of the axis when
limiting the forces.
When using the gravity mesh filter, the orientation also sets the gravity
direction. In world orientation, cloth will always fall towards the
ground plane. In view mode, cloth will always fall down relative to the
view.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8618
Change the way Sync Length works so that it keeps keyframes at the same
key as before the sync. Now when the user exits tweak mode, the overall
NLA result is unchanged.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D7602
Popovers which are aligned with properties should turn themself
(and the panel they open) inactive when the corresponding property
toggle is turned off. A notable exception is the snap settings
popover, as snapping can still be used when the toggle is off.
Differential Revision: https://developer.blender.org/D8584
This reverts {rB1693a5efe91999b60b3dc0bdff727473b3bd00bb}
and implements an alternative solution.
The old patch had the problem that the depsgraph would always
evaluate at the current frame of the original scene (even when
`DEG_evaluate_on_framechange` was used). Now it is possible
to evaluate the depsgraph at a specific frame without having to
change the original scene.
Reviewers: sergey, sybren
Differential Revision: https://developer.blender.org/D8616
Add `-Wno-maybe-uninitialized` option to `CMAKE_CXX_FLAGS_RELEASE` and
`CMAKE_CXX_FLAGS_RELWITHDEBINFO` variables on GCC/Linux.
In Release builds GCC's `-Wmaybe-uninitialized` warning is unreliable,
and thus causes noise that can drown out other warnings. These warnings
are now silenced in release mode builds.a
Debug builds seem fine, so flags for debug builds are not touched by
this commit.
No functional changes.
Reviewed By: Sergey
Differential Revision: https://developer.blender.org/D8615
This reverts commit 52f40bcff2.
Apologies for the noise. I caught a problem with this that I hadn't before. I will
commit later after thorough testing.
This will re-link all usages of a library override data-block
(including all of its override dependencies) to its reference linked
IDs, and delete those liboverrides.
As usual, it is available in the ID sub-menu of the outliner context
right-click menu.
Part of T76555.
RNA update function would only update objects from 'main' instantiated
collection, not those from sub-collections.
This should be comitted to 2.90 (and backported to 2.83 too).
Maniphest Tasks: T79935
Differential Revision: https://developer.blender.org/D8654
RNA update function would only update objects from 'main' instantiated
collection, not those from sub-collections.
This should be comitted to 2.90 (and backported to 2.83 too).
Maniphest Tasks: T79935
Differential Revision: https://developer.blender.org/D8654
Continuing the work of eb9055a572, remove remaining unecessary
variables and arguments that were related tabbing and horizontal
alignment of panels. For example, "vertical" was always true, and
removing that exposed other unused variables.
Horizontal panel alignment hasn't been used for years, and we have no
plans to use it in the future. It adds a fair amount of complexity to
the panel code which makes adding features take longer.
This code removes the X closing flag, and all of the logic / variables
unused without it.
This commit includes a file subversion bump.
Differential Revision: https://developer.blender.org/D8601
Using C++ exceptions in Blender is difficult, due to the large
number of C functions in the call stack. However, C++ data
structures in blenlib should at least try to be exception safe,
so that they can be used if someone wants to use exceptions
in some isolated area.
This patch improves the exception safety of the Vector, Array
and Stack data structure. This is mainly achieved by reordering
some lines and doing some explicit exception handling.
I don't expect performance of common operations to be affected
by this change.
The three containers are supposed to provide at least the
basic exception guarantee for most methods (except for e.g.
`*_unchecked` methods). So, resources should not leak when
the contained type throws an exception.
I also added new unit tests that test the exception handling
in various cases.
Available from the usual ID submenu in the Outliner context menu.
The goal of this operator is to re-create the override from the linked
data, while preserving existing defined overrides.
This allows to update local opverrides when relations between datablocks
are changed in source library linked data.
Part of T76555.
This splits the volume related data (properties for rendering and attributes) of the Mesh node
into a new `Volume` node type.
This `Volume` node derives from the `Mesh` class since we generate a mesh for the bounds of the
volume, as such we can safely work on `Volumes` as if they were `Meshes`, e.g. for BVH creation.
However such code should still check for the geometry type of the object to be `MESH` or `VOLUME`
which may be bug prone if this is forgotten.
This is part of T79131.
Reviewed By: brecht
Maniphest Tasks: T79131
Differential Revision: https://developer.blender.org/D8538
Now by default the selection mode is All keyframes types.
Also removed the icon for All option and renamed from `All Types`to `All`.
UI review by @pablovazquez
Users may input an invalid scene/view-layer combination via Python. We
can easily detect that and fail gracefully.
Besides checking input parameters in RNA, also assert the
scene/view-layer combination is valid in lower level Depsgraph lookup
function (called by statistics query).
This RNA/BPY function was removed in c08d847488. For understandable
reasons really-- getting scene statistics from a string displayed in the
status bar is not exactly the best design. But we have committed to not
changing the RNA API too much for the 2.90 release, so we would like to
keep this functionality.
Differential Revision: https://developer.blender.org/D8604
Reviewd by: Julian Eisel
This RNA/BPY function was removed in c08d847488. For understandable
reasons really-- getting scene statistics from a string displayed in the
status bar is not exactly the best design. But we have committed to not
changing the RNA API too much for the 2.90 release, so we would like to
keep this functionality.
Differential Revision: https://developer.blender.org/D8604
Reviewd by: Julian Eisel
During alpha the user preferences > experimental featuers are available
to prevent merge issues and allow developers to seek feedback.
This needs to be manually turned off when we branch for beta, otherwise
the RNA of the incomplete features will be exposed.
I only skipped a few loops in the monstrous ui_handle_menu_event
function. Also, I only changed variable names where necessary to
prevent redeclarations.
Differential Revision: https://developer.blender.org/D8586
This make use of the GLStateStack functions for:
- `GPU_blend()`
- `GPU_blend_set_func()`
- `GPU_blend_set_func_separate()`
The goal is to unify them using an explicit state setting.
This will remove the need to use obscure blend functions
Now error printing only display the line related to the error.
We also put char marker if present.
Example:
```
-- Shader Compilation Errors : MAMaterial --
10414 | node_fresnel(, facingnormal, viewposition, tmp34);
| ^
| error: syntax error, unexpected ',', expecting ')'
----------------------------------
```
This mainly removes the bmain argument, which can be
retrieved from the graph itself.
Also, I removed some outdated/unnecessary comments.
Reviewers: sergey, sybren
Differential Revision: https://developer.blender.org/D8614
This adds a new brush property called "Deformation Target" which
controls how the brush deformations is going to affect the mesh data. By
default is set to Geometry, which makes the brushes displace the
vertices. When set to Cloth Simulation, the deformation of the brush is
applied to the cloth solver constraints, so the simulation is
responsible to apply the final deformation. This allows to add cloth
simulation effects to other sculpt tools with minor modifications to their
code.
This patch enables Cloth Simulation deformation target for Pose and
Boundary brushes, which are tools that are already designed to work in
low poly counts and produce large deformations. This allows creating the
most common cloth effects, like bending and compressing folds, without
relying on collisions.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8578
Same concept as the Multires Displacement Eraser Brush but implemented
as a mesh Filter. This allows to delete the displacement of an entire
area uniformly.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8608
This enables the invert mode in the smooth brush as Enhance Details.
The operation is similar to the Sharpen Filter intensify details parameter,
which consist in applying the laplacian smooth displacement in the opposite
direction calculated using the original coordinates.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8509
The evaluated mesh is now only recomputed when the required data layers
are missing. Previously the evaluated mesh was re-evaluated incorrectly,
which caused the stippled result and the failing assert.
Since now only the evaluated mesh is used, and never a temporary mesh,
there is also no more need to keep track of whether the mesh needs
freeing or not.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8574
Issue introduced on fe045b2b77.
Since the stereoscopy compositing (anaglyph, ...) is only done for
viewports the VSE preview and compositor need to use viewports.
Reviewed by: dfelinto
Differential Revision: https://developer.blender.org/D8472
Issue introduced on fe045b2b77.
Since the stereoscopy compositing (anaglyph, ...) is only done for
viewports the VSE preview and compositor need to use viewports.
Reviewed by: dfelinto
Differential Revision: https://developer.blender.org/D8472
Previously, the XYZ deform axis of the Mesh Filter were limited to
object space (which is the default for sculpt mode). Now it is possible
to limit the XYZ displacement in Local, Global or View space.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8582
For 2.90 release this should not be exposed in the RNA API.
In master this needs to be ON by default, that's all.
Differential Revision: https://developer.blender.org/D8589
The Pass struct is now a Node and the passes are moved from the Film
class to the Scene class.
The Pass Node only has `type` and `name` as sockets as those seem to be
the only properties settable by exporters (other properties are implicit
and depend on the pass type).
This is part of T79131.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8591
Final releases (including beta) should strictly show features that are
finalized to prevent loss of data, old API clanging around, and the
overall quality of the product (Blender) presented.
Note that rendering should never be affected by user preferences, so
this is only changing things in the UI level.
Development note: This is reset experimental UI on file load.
Also note: to hide RNA (needed for hair and particles) will be done as a
separate patch.
Differential Revision: https://developer.blender.org/D8606
After drawing, the batch could be reset and draw again using other
parameters.
Avoid having to track references by setting the batch pointer to NULL after
drawing.
This uses the same concept of the Mesh Filter but for applying the cloth
filter forces, so now it can be limited to a specific axis.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8567
This adds an option to the Multires modifier to sculpt directly on the
base mesh while previewing the displacement of a higher subdivisions
level. What this does it considering Multires as a regular modifier
without exposing the grid displacement to sculpt mode.
This allows to see the propagation happening in real time, which enables
to use complex tools like Cloth or Pose in much higher resolutions and
without surface noise and artifacts.
Reviewed By: sergey, Severin
Differential Revision: https://developer.blender.org/D8555
Functions `mesh_create_eval_final_view()` and
`mesh_create_eval_final_render()` were doing the exact same thing,
except for a hack introduced in d3eb9dddd6 (2012-10-08, Better fix for
T32846: dupligroup messes up particle instancing on rendering) that
appears to be no longer necessary. Besides that, these functions had
confusing names. Their functionality changed over time, and whether to
do for-render or for-viewport evaluation is now actually determined by
the depsgraph evaluation mode. This means that the `..._render` function
could evaluate a mesh with viewport settings, and vice versa.
The functions are now merged into `mesh_create_eval_final()`, and the
hack has been removed. The `OB_NO_PSYS_UPDATE` flag has been removed
entirely (instead of keeping it around as deprecated flag), because it
was always only temporarily set on objects during mesh evaluation and
thus not saved to the blend file.
No expected functional changes as far as users are concerned.
One should be able to edit overridable IDProps values, but never their
settings/definitions.
Note that being able to add new IDProps to overrides is still a TODO.
Reported by Josephbburg (@Josephbburg) over blenderchat, thanks.
Even the Cloth Brush grab works like a regular grab brush, it makes
sense to support spacing just in this brush in order to prevent creating
more brush steps that update the simulation. This way, it is possible to
create grab brushes that update the simulation constantly while grabbing
(using the dots stroke mode) or brushes that only update the simulation
when the cursor moves (using spacing).
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8568
This code was left here after the refactor, it was doing nothing and it
was causing an assert.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8579
The Face Set visibility operator was using the last active Face Set
updated by the paint cursor, so when the paint cursor is not used (when
using a filter or a transform tool), the active Face Set was not updating
and it was hidding the wrong Face Set based on the last cursor position
with a brush tool active. Now the Face Set Visitility operator has an
invoke callback wich forces a active vertex and face set update
regardless of the active tool, so it should always work correctly.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8580
This uses a single row for the three axis instead of a row per axis.
Reviewed By: sergey, Severin
Differential Revision: https://developer.blender.org/D8581
This was a TODO in the code. Previously the Face Set datalayer was
deleted and recreated with a constant ID of 0. Now the datalayer is
preserved and set to the SculptSession after slicing the mask and a new
ID is calculated for the new faces that the slicing operation produced,
so they can be easily isolated for further tweaking.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8583
This will be used for new features like supporting cloth deformation in
other brushes and tools outside of the cloth brush code.
No functional changes.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8602
This moves `Session::get_requested_device_features`,
`Session::load_kernels`, and `Session::update_scene` out of `Session`
and into `Scene`, as mentioned in D8544.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8590
Some constraint-specific operators, like set/clear inverse matrix of
childof constraint, are also valid on original, linked/overridden
constraints.
Similar change to what was done to modifiers poll function a few days
ago.
Reported by Josephbburg (@Josephbburg) over IRC, thanks.
The description is self-explanatory: enable SSE optimizations in the
FFmpeg library. They were disabled from the very beginning of the
dependency builder, possibly due to portability concerns.
FFmpeg does perform runtime check for available CPU microarchitectures,
so the codecs will still run on older hardware, but they will run way
faster on newer hardware.
For example, re-encoding 3405 2560x1376 frames on Xeon E5-2699 V4 CPU
went down from 313sec to 210.
Differential Revision: https://developer.blender.org/D8594
Changing line-width shouldn't scale cursor motion. Related to T79787.
Use dpi_fac for scaling curve error threshold & number button drag
threshold calculation.
Use 'dpi_fac' instead of 'pixelsize' to scale input sensitivity
based on the interface scale.
Also use dpi_fac for view zoom operator.
Thanks to @ISS for investigating.
Multithreaded implementation can provide significant performance gain
on CPU's that can handle more parallel tasks.
On my 8 core system I got about 3.5x faster processing speed.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8585
Define `RNA_def_property_ui_range` for head and tail transform properties.
Step of 10 should match original behavior when tweaking value.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D8513
Original sequence lookup failed, becase name changed in another thread.
Fix is same as 0471349c90 - stop prefetching before changing content
of seqbase.
I have covered more cases, and added assert so it is more obvious that
issue is in lookup, and it shouldn't fail.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8592
The fix for T75936 made it possible to export invisible objects to
Alembic. This commit applies the same approach to the USD exporter.
The USD and Alembic code is slightly different in terms of where in the
exported file the visibility attribute is stored. In USD the visibility
is used to prune the scene graph, and thus there are only two options:
"hidden" and "inherited". Setting the visiblity of a node in the scene
graph to "hidden" immediately hides all its children. To allow hidden
parents with visible children, the visibility is stored on the object
data (so the geometry/camera/lamp/etc) instead.
Add a test that checks invisible objects are iterated over by the
`IO::AbstractHierarchyIterator` class, when a suitable depsgraph is given.
No functional changes.
Add a new depsgraph builder class that includes invisible objects and
use that in the Alembic exporter.
Alembic supports three options for visibility, "visible", "inherited",
and "hidden". This means that parents can be hidden and still have
visible children (contrary to USD, where invisibility is used to prune
an entire scene graph subtree). Because of this, the visibility is
stored on the transform node, as that represents the Object in Blender
and thus keeps the Alembic file as close to Blender's own structure as
possible.
Reviewed By: Sergey
Differential Revision: https://developer.blender.org/D8595
Rename test `alembic_tests` to `alembic_export_tests`, so that its name
is consistent with the Python file containing the tests,
`alembic_export_tests.py`.
No functional changes.
The paint cursor now uses a single call to
SCULPT_cursor_geometry_info_update and the Sculpt API to update both the
radius and the SculptSession data, so random access needs to be
initialized for dyntopo before using API functions.
Reviewed By: sergey
Maniphest Tasks: T79597
Differential Revision: https://developer.blender.org/D8489
When copying between a set RNA runtime property and an unset one, code
would not behave properly.
We have to also consider NULL 'override apply' callback pointer as a
valid 'use default override apply function' case.
Instead of checking for the length of a list, just handle the error that
occurs when the length is incorrect.
No functional changes to any actual test.
Currently, the search operator in the node add menu NODE_MT_add is drawn
even if no node categories exists. This patch only draws the operator if
at least one node category passes the poll.
This patch is needed because some add-ons use custom search operator and
do not register node categories. In this case, it is undesirable to have
a search operator drawn that do nothing and is not used. One such add-on
is Animation Nodes.
Reviewed By: Jacques Lucke
Differential Revision: https://developer.blender.org/D8576
The BLI_bitmap had the potential to eat a lot of memory as it was a
dense map between all the vertices in the mesh.
Now we instead use BLI_edgeset so that we only store data when needed
(creating a spare map instead of a dense).
In EEVEE the AO renderpass influenced other render passes. Until now the
pass wasn't selectable when AO was disabled in the scene to remove these
render artifacts.
This patch allows rendering EEVEE AO pass without enabling it in the
scene. It does this by binding a fallback texture that is used by the
surface shaders.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7956
This commit renames 'execute' to 'run' because:
- This follows Python's "PyRun" which these functions wrap.
- Execution functions can use either exec/eval modes,
making naming awkward (for future API refactoring).
This was committed as a temporary workaround in 82150f5641
as release builds were failing (only debug builds worked).
This adds `stdio.h` to the header which is now split into a file that
contains more specialized functionality.
Also move function body inside BPY_python_backtrace,
removing PyC_StackPrint as we have PyC_StackSpit() for
similar functionality that can be called from a debugger.
Checks for header alignment didn't account for tool-header & header
having different alignment.
There is no reason to use a lookup function on the area
(ED_area_header_alignment) as we already have region.
Check the regions alignment directly, remove access functions.
The existing header flip detection didn't account for mixed
tool-header and header flipping & visibility between space-types.
Now alignment syncing handles any combination of header,
tool-header & footer flipped state, in a way that can be extended
to other region types in the future.
By default boost::python in debug configuration links the release
python libraries. Which leads to loading issues with the produced
modules in a debug blender (which does use the debug python libs)
Bjam has an option to switch this to the debug libraries but when
you switch that on it changes the library names for *all* boost
libraries, even ones that don't have anything to do with python
and even the release libraries.
therefore an alternative way has been chosen and we're dealing
with this by adding a define rather than asking bjam to do it.
Many of these popovers could use a design pass in 2.91, but for 2.90 we
don't want to change any UI strings at this point, so the best way to
solve the cutoff text is to widen the popovers. Sadly this won't affect
popovers when other languages besides English have longer strings, but
solving that is a much larger task.
Another benefit is that tweaking sculpt / paint brush options feels much
less cramped with slightly wider popovers.
I only know of one string that is still slightly cutoff by default with
this patch, the "Max Element Distance" property of the pose brush in the
sculpt mode brush settings popover. But I didn't think it was worth
widening that popover more to deal with that one case.
Differential Revision: https://developer.blender.org/D8575
We have to explicitly enable fixed world space lighting. This was in
fact already done, but overridden by the code to sync the 3D View
shading settings to the VR view.
Mistake in cb578ca104. Before that, the extension vector was static,
to make sure the extension name strings wouldn't get destructed when
leaving the function. I didn't think that was an issue and couldn't
recreate one, because until the previous commit we wouldn't actually
add any extensions to the vector on Windows (the system I tested
with).
Use C++17's `std::string_view` now, which avoids the string copies
`std::string` creates for itself and thus its destruction when leaving
the local scope.
The OpenXR debug extension was disabled on Windows as a workaround. This
was an old leftover from when there was only the Windows Mixed Reality
runtime on Windows. The debug extension didn't work for it and we didn't
have a way to disable it just for Windows Mixed Reality.
Now it seems to work though, so we remove the workaround. If specific
runtimes still have trouble with the extension, we can disable it
specifically for these runtimes now.
Windows only workaround. I'll have to investigate Linux separately.
Steam's OpenGL compatibility is still new and doesn't work for us yet
(neither does it for standard OpenXR examples from what I've heard and
seen myself). We can work around that by falling back to our DirectX
compatibility layer.
Note that this DirectX compatibility still doesn't work for some
systems, see T76082.
Implementation note: Since the graphics binding extensions have to be
enabled before we can find out which runtime is in use (e.g. SteamVR vs.
Oculus, etc), we can now enable multiple graphics binding extensions but
settle for a single one to use later.
Once the SteamVR OpenGL backend works, we can remove this workaround
again.
Fixes T78267.
On VR session start with positional tracking disabled, the pose would
have an offset applied but it was supposed to start exactly at the
landmark position.
Issue is that we applied the offset to cancel out the position offset
reported by the OpenXR runtime incorrectly. We only want to do that if
positional tracking is enabled, because if not we don't even apply the
runtime's position offset. So we'd cancel something out that wasn't
there.
The new reverse iterators behave as the reverse iterators for contains from
the standard library. Have a look at the tests to see how to use them.
Using them will hopefully become easier with ranges in C++20.
A Vector can now be constructed from two iterators, which is very common
in the standard library.
New Vector.insert methods allow adding elements in the middle of a vector.
These methods should not be used often in practice, because they has a linear running time.
New Vector.prepend methods allow adding elements to the beginning of a vector.
These methods are O(n) as well.
* Avoid deep copy of vectors (technically more than a cleanup).
* Use `std::make_unique` for allocating unique pointers, rather than
manual `new`.
* Use `std::optional` for optional by-value return values, rather than
C-style `bool` to indicate success + return-argument.
* Use references rather than pointers for non-optional arguments.
* Avoid manual `new`/`delete`. Use `std::unique_ptr` for local scope
bound lifetime.
* Use C++ `nullptr` rather than C's `NULL`.
* Remove unnecessary friend declaration.
These changes are generally considered good practise and move us more to
a "modern C++" style. We can still go much further of course.
See https://isocpp.github.io/CppCoreGuidelines/CppCoreGuidelines.
Since DATA_PT_sculpt_vertex_colors has its own poll() we need to call
the poll() of MeshButtonsPanel as well
Differential Revision: https://developer.blender.org/D8563
This feature was removed during the refactor, but it's needed for this type of strokes to display the line using the stroke color without checking if the stroke is enabled or not in the material.
This color is used only for these special strokes.
This patch changes openvdb from a static to a dynamic library.
this is in preparation for enabling pyopenvdb at some point
in the future.
Differential Revision: https://developer.blender.org/D8282
Reviewed by: brecht
Many of the icons had lots of interior geometry left over from
subdivision. In these cases we should remove the interior geometry
and leave the object with the modifier for the future.
This icon mimics the details of the cloth brush icon while using the
frame style extablished for the other "filter" tools.
Differential Revision: https://developer.blender.org/D8467
This icon mimics the details of the cloth brush icon while using the
frame style extablished for the other "filter" tools.
Differential Revision: https://developer.blender.org/D8467
In this mode the preview image is always using the most of the preview
area space: it is scaled to fit, preserving aspect ratio. This makes it
possible to always have maximum of the preview region even after resize
of other areas.
This mode is enabled by default, is available in the View -> Zoom to Fit
menu. It is enabled when View All (Home key) is used, and is disabled
when manual navigation ([panning, zooming) is performed.
There is no versioning code, which means existing files will open as-is,
but new projects will have this option enabled.
Ref T78987
Maniphest Tasks: T78987
Differential Revision: https://developer.blender.org/D8549
Allows to hook per-space code which is to be run on view navigation.
This is required to have zoom-to-fit implemented in the sequencer.
There might be more cases where the clalback is to be called from,
but it could be easier to address those on the case-by-case basis
when its needed.
This changes the drawing paradigm a bit. The VAO configuration is done
JIT-style and depends on context active shader.
This is to allow more flexibility for implementations to do optimization
at lower level.
The vao cache is now its own class to isolate the concept. It is this
class that is reference by the GLContext for ownership of the containing
VAO ids.
We instead use a handle reference counter on the GPUVertBufs used by
the instancing batches. This make sure that if an update happens on the
GPUVertBuf used to contruct the batch, they will never have the same
memory address than the previously allocated ones (since they are still
pending deletion thanks to the refcounter).
This avoid the linear search to update the GPUBatch in the case a
batch is deleted (which was even a bad option since they could be only
cleared)
A handle refcount is here to avoid freeing of the GPUVertBuf datablock
if it is still referenced somewhere else.
This does not prevent deleting the actual data. This is to avoid too
much zombie data usage.
This is in order to avoid most hacks inside `draw_instance_data.c`.
It was impossible for drivers to use shape key properties, modifiers
generate a new mesh. After mesh evaluation the shape keys are no longer
necessary, and because of this the `key` pointer was not copied. As
drivers work on evaluated data, however, they do need this `key`
pointer.
This commit makes the `key` pointer available in evaluated meshes, but
this is somewhat dangerous. There was an explicit reason why the key on
result was kept at null pointer: to have the evaluated mesh in a
consistent state. Assigning this pointer makes it potentially
inconsistent, as the evaluated mesh and the original shape key may have
different topologies.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7785
It was always possible to set it to zero by typing in the value.
This new soft limit is more consistent with the fluid cache
and the Scene.frame_start property.
This was a regression in deaff945d0 which skips copying a mesh.
Dupli-verts/faces were not updated to account for this.
This supports iterating over edit-mesh vertices & faces,
since falling back to a full copy (as we do in some places)
will be slow while transforming geometry.
This commit looks as if it would change behavior with orcos,
since any edit-mesh deformation causes them to be assigned.
However in practice there is no functional change, details in comments.
Replace the evaluated mesh with VertexDupliData.mvert since only
vertices are used. This makes dupli-vert similar to how dupli-face
was already working.
When using constant falloff symmetry was working fine because the same
deformation is applied twice on the same vertices. When using no
constant falloffs, the deformation is different between symmetry passes,
so vertices need to be separated by symmetry areas to get the right
deformation from its symmetry pass without being overwriten by the next
one.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8541
This adds the boundary_falloff_type and boundary_offset to control how the
falloff of the Boundary Brush is applied.
Boundary Origin Offset is the same concept as the Pose Origin offset in
the Pose Brush. It is a multiplier that adds extra length to the brush
radius to locate the deformation pivot further from the boundary without
affecting the falloff.
The Falloff type includes Constant (previous default), brush radius, loop
and loop and invert. Loop and Loop and Invert can be used to create
deformation patterns in a mesh.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8526
If the File Browser was used in regular editor mode (e.g. not through an
operation like File > Open), the operator that usually opens files and
directories wouldn't execute. We need to keep two operators for
double-click in the keymap so selecting and opening works in all cases.
Caused by c606044157.
This adds support for panel categories to the instanced panel system
used for modifiers and others. The change is pulled from D7997 where
it is needed for FCurve modifiers, but it is unused now.
The change is simple and basically amounts to checking the panel
category where it was overlooked before.
This brush deletes displacement information of the Multires Modifier,
resetting the mesh to the subdivision limit surface.
This can be use to easily delete parts of the sculpt or to fix
reprojection artifacts after applying a shrinkwrap.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8543
This this adds the option of building boost::python
in the libs builder, in preparation for future
dependencies that require it (ie pyopenvdb)
disabled by default, can be enabled with the
`WITH_BOOST_PYTHON` cmake option.
Differential Revision: https://developer.blender.org/D8212
Reviewed by: brecht
Previously the way to use this operations was using the shortcut Ctrl +
W and Ctrl + Alt + W, which was not very discoverable and it was
limiting the amount of options that can be added to the operator.Now the
same functionality of the operator is available as a tool, which will
make easier to add other editing operations and options without adding
more entries to the keymap.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8545
The object "delta_" rna variables were not added to the depsgraph search
and thus it would not trigger updates of the object during animation
playback.
The object "delta_" rna variables were not added to the depsgraph search
and thus it would not trigger updates of the object during animation
playback.
DRW_render_set_time is calling RE_engine_frame_set will in turn calls
BKE_scene_camera_switch_update.
To workaround this, we get the original camera object at render init and
get the evaluated version from it after each time change.
This change how motion data are indexed inside the ghash.
We follow cycles closely now and use evaluated ID pointers.
By removing the hack, it fixes T78561 (No Motion Blur on linked objects)
This fix issues with instanced geometry and modifiers. Since the
depsgraph will duplicate the objects when they have different modifiers,
the evaluated object are garanteed to be unique.
If one of the operands of a binary operator a float, integer
operand gets promoted to float as well.
Differential Revision: https://developer.blender.org/D8552
For a locked shapekey, a SculptSession's orig_cos / deform_cos /
deform_imats are not initialized (they only are when
deform_modifiers_active is true -- this in turn is only true for
shapekeys if they are //not// locked [and for deforming modifiers of
course])
We can just update that keyblock with sculpt_update_keyblock() in case
of a locked shapekey
Maniphest Tasks: T79622
Differential Revision: https://developer.blender.org/D8499
Caused by rBfffba2b6530.
In above commit, the buttons rnaindex [-1 for entire arrays like colors]
was not used anymore for the entire function body of
`ED_autokeyframe_property` (previously in `ui_but_anim_autokey`).
Replacing the index with 0 (in the array case) is indeed necessary for
`BKE_fcurve_find_by_rna_context_ui`, prior to rBfffba2b6530 this was
taken care of by using `ui_but_get_fcurve` instead [which did this
internally].
But using an index of 0 (instead of -1) for the entire function body of
`ED_autokeyframe_property` fails for the array part later, namely
`insert_keyframe` needs -1 here.
Now just replace the index for //finding the FCurve//, but use the
original for //inserting the keyframe//.
Could be backported to 2.83 LTS.
Reviewers: campbellbarton, sybren
Subscribers:
The previous algorithm was not using all of the requested grids to build a mesh
around the volume due to limitations regarding the use of a dense buffer to
gather information about the volume's topology. This resulted in artefacts during
rendering.
The mesh generation is now done by merging all of the input grids and using the
resulting grid's topology to create the mesh. The generation of the mesh
is still done in index space as before, and the vertices are converted to object
space by using the merged topology grid indexToWorld transform.
To be able to merge the grids together we have to make sure that their transformation
matrices and their index spaces match, thus, if they do not match we simply resample
the grids. This behaviour should tackle one other limitation of the current algorithm,
which is that only one transformation matrix was used to generate the final mesh.
If we do not have an OpenVDB grid for the requested volume data, we generate
a temporary OpenVDB grid for it.
Differential Revision: https://developer.blender.org/D8401
Now the one vertex defines the position of the UV chart, while rotation and
shape is still determined automatically.
Initial patch by Willis (wlssirius).
Differential Revision: https://developer.blender.org/D8484
This is particular important because 2.90 will coexist with 2.83 LTS, so
we should warn the users of potential loss of data when going from 2.90
to 2.83 and back.
Differential Revision: https://developer.blender.org/D8488
Those where assuming we always get a valid modifier data from context,
which is not always true...
Also fix similar issue with shortcuts as reported in T79635.
It is unfortunate that we cannot get active modifier from context when
operator is called from a shortcut, but we'd need an event for this to
work... So for now forbid any modifier operation of liboverride objects
in that case.
'VIEW2D_OT' operators were not respected in WM_keymap_guess_opname().
This was seemingly done on purpose (see comment "Op types purposely
skipped for now"), but dont really see the reason for doing so.
Since the "View2D" keymap is not bound to a specific spacetype, we can
still find it using WM_keymap_find_all() [and passing 0 as spacetype].
Reviewers: Severin
Subscribers:
Vert-only mesh is valid input for the skin modifier (displays isolated
cubes), prevent error message about missing root vertex in that case.
Maniphest Tasks: T79700
Differential Revision: https://developer.blender.org/D8533
saving with 'Remap Relative' option
Caused by rBf7386b97571e.
Logic in BKE_bpath_traverse_main calls the callback multiple times [as
often as there are images in the strip].
Prior to above commit, the callback was
'bpath_relative_convert_visit_cb' [this one did not have this problem -
since it returned early if the path was already made relative once]
After rBf7386b97571e though, the 'bpath_relative_rebase_visit_cb' is
used [this one should not be entered multiple times, it would modifiy the
directy again and again].
Luckily, we have a flag (BKE_BPATH_TRAVERSE_SKIP_MULTIFILE) that can be
used to prevent this (this will take care of only calling the callback
once in BKE_bpath_traverse_main for the VSE case)
Could be backported to 2.83 I think.
Maniphest Tasks: T79676
Differential Revision: https://developer.blender.org/D8536
This commit generally moves variable declarations to the smallest scope
the variables are used in. This makes the code more readable by
making it clearer when variables are used and by removing the block
of variable declarations at the top of each function.
This change makes the generated points a light dimmer than selectable points.
Before:
{F8765593}
After:
{F8765585}
Maniphest Tasks: T79683
Differential Revision: https://developer.blender.org/D8515
This options allows to perform Face Sets operations while preserving the
mesh visibility. Edit hidden face sets is enabled by default in order to
expand the visible area of the mesh with the grow/shrink operator, but
this can be changed in the keymap per edit operation as more operations
are supported.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8029
Old and new collections are the same data in Master collection case
here, so we cannot consider the `gobject` listbase of `collection_old`
as always immutable.
This commits:
- Updates some libraries to latest officially supported versions:
** Numpy: 1.17.5
** OCIO: 1.1.1
** OIIO: 2.1.15
** OSL: 1.10.10
** OIDN: 1.2.1
- Re-enables some distro packages (like OSL, OIIO, OCIO...).
- Add missing 'CMake cleanup commands' for generated CMake update
command, for Embree, OIDN and OpenXR.
- Generalizes using min/max versions of accepted libraries, if no
package can be found in specified range then it is built from sources.
The later point should help keeping things a bit in better conditions,
although current maximal accepted versions are somewhat arbitrary guess
currently.
The preview of points was only done when the edge is wire.
Now the preview of points is done when the edge is not connected to any
quad.
Also to avoid edge slide in this case, all new vertices created in this
specific case are not selected.
Differential Revision: https://developer.blender.org/D7457
Is not only the values of translation/scale/rotation which are to be inverted,
but also the order of operations.
Differential Revision: https://developer.blender.org/D8518
This reverts commit 9adedb2605. It changes
how duplis work, and by that altered how Alembic and USD files are
written. This was signalled by a failing Alembic unit test.
Now the operators are split to define different default values. This is also required for the future Bezier primitive tools.
This allows to show in the Topbar the number of subdivisions. Before this value was totally hidden and it was number of Edges. The wheelmouse can be used to override the value while running, but does not change the default value.
{F8766270}
All operators share same code.
Also, fixed some bad practices done with Toolbar in python.
Reviewed By: mendio, pepeland
Differential Revision: https://developer.blender.org/D8506
Mainly caused by moving tests to source folder, which brings
new compiler flags.
Also, no need to extend include directories (to the non-existing paths,
btw) since this is done by the CmakeList.txt which is in the blenlib folder.
Solves possible pointer-based comparison fiasco.
Another nice outcome of this is that topology cache will now be
preserved throughout the undo system. For example, undo of object
transform will not require topology cache to be re-created.
Differential Revision: https://developer.blender.org/D8493
The file was including BKE. It was a required fix for another
compilation error a while back. It is a bad level include, and
seems is not needed anymore.
The problem here is that the baking code uses tiles to exchange pixel data with
the renderer since a recent-ish refactor, but the code that sent data to the
renderer did not initialize the bake result pixels.
Therefore, when the baking process for the second object started, Cycles
received empty tiles and sent them back as-is if the second object did not
cover them.
By initializing the tiles with the result of the previous bakes, we avoid this
problem.
We can't exactly follow what we do for macOS here. On Windows special
characters can be inserted with Ctrl+Alt. So make sure we expect UTF-8
characters when Alt is held.
Mistake in 87062d4d67.
Since C++17 there is also std::string_view, which is similar to StringRef.
This commit does a couple of things:
* New implicit conversions between StringRef and std::string_view.
* Support std::string_view in blender::DefaultHash.
* Support most of the methods that std::string_view has.
* Add StringRef::not_found which can be used instead of -1 in some places.
* Improve/fix the description at the top of BLI_string_ref.hh.
And make them part of the blender_test runner. The one exception is blenlib
performance tests, which we don't want to run by default. They remain in their
own executable.
Differential Revision: https://developer.blender.org/D8498
This adds a property that checks the normals of each vertex against the
view direction to decide if they should be masked (similar to the
"Front Faces Only" option works for brushes.
Reviewed By: sergey
Maniphest Tasks: T77637
Differential Revision: https://developer.blender.org/D8448
This brush includes a set of deformation modes designed to deform and
control the shape of the mesh boundaries, which are really hard to do
with regular sculpt brushes (and even in edit mode). This is useful
for creating cloth assets and hard surface base meshes.
The brush detects the mesh boundary closest to the active vertex and
propagates the deformation using the brush falloff into the mesh.
It includes bend, expand, inflate, grab and twist deform modes.
The main use cases of this brush are the Bend and Expand deformation
modes, which depend on a grid topology to create the best results.
In order to do further adjustments and tweaks to the result of these
deformation modes, the brush also includes the Inflate, Grab and
Twist deformation modes, which do not depend that much on the topology.
Grab and Inflate are the same operation that is implemented in the
Grab and Inflate tools, they are also available in the boundary brush
as producing deformations with regular brushes in these areas is very
hard to control.
Even if this brush can produce deformations in triangle meshes and
meshes with a non-regular quad grid, the more regular and clean the
topology is, the better. Most of the assets this brush is intended to
deform are always created from a cylindrical or plane quad grid, so it
should be fine. Also, its algorithms can be improved in future versions
to handle more corner cases and topology patterns.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8356
Proper handling of View Layers for the VR session was never implemented.
Now the View Layer of the VR session follows the window the session was
started in.
Note that if this window is closed, we fallback to another window. This
is done to avoid the overhead it would take to maintain a separate
depsgraph for the VR view. Instead we always share some already visible
View Layer (and hence the depsgraph).
The problem is caused by a lack of prediction in the `isect_line_segment_tri_v3`
that incorrectly confirms some intersections of coplanar segments to the triangle.
The solution is to use another algorithm to detect intersections.
This also resulted in a slight improvement in the performance:
- 1min 17sec to 1min 6sec in my test file
Differential Revision: https://developer.blender.org/D8500
Root of the issue was not fixed in 2.90, only hidden by the fact that we
now re-read much less data during undo's that we used to, when some new
datablock gets added or removed.
This is not an ideal solution (as usual when dealing with data pointers
shared across data-blocks), but it's decent enough. thanks a lot to
@brecht for it!
To be backported to 2.83 too.
We want the session to start exactly at the landmark position, with
no additional offset. Some runtimes (e.g. Windows Mixed Reality) may
give an initial non-[0,0,0] position at session start though.
Also add a comment explaining the purpose of the eye offset variable.
There would always be an unintended offset applied. Per design there
should not be any offset when changing VR Landmarks, the view should
just jump exactly to the Landmark.
Due to the recent changes, we don't have to add, but substract the eye
offset we apply to get the wanted behavior.
Mistake in 607d745a79.
We want the session to start exactly at the landmark position, with
no additional offset. Some runtimes (e.g. Windows Mixed Reality) may
give an initial non-[0,0,0] position at session start though.
Also add a comment explaining the purpose of the eye offset variable.
There would always be an unintended offset applied. Per design there
should not be any offset when changing VR Landmarks, the view should
just jump exactly to the Landmark.
Due to the recent changes, we don't have to add, but substract the eye
offset we apply to get the wanted behavior.
Mistake in 607d745a79.
This does not fix all the cases in the bug report, because there are multiple
different issues. Only the first two are fixed. The third is probably a known
issue for now.
Before this patch, the rigid body simulation was always done after modifiers
are evaluated, because to perform the simulation, the final geometry of the
object was required. However, the geometry is not required in all cases,
depending on the selected collisions shape.
This patch changes it so that when the simulation does not need the
evaluated geometry, the simulation will be done before the modifiers
are evaluated. This gives the modifiers access to the simulated positions.
When the rigid body simulation does depend on the evaluated geometry,
it will still be performed after modifiers are evaluated.
The simulation will be performed after modifiers are evaluated, iff
the collision shape is "Convex Hull" or "Mesh" and the source is set
to "Deform" or "Final".
Reviewers: sergey
Differential Revision: https://developer.blender.org/D8487
In last set of refactoring patches, code implementing this feature
has been accidentally removed.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8449
This just set a global object responsible for allocating new objects
in a thread safe way without needing any GPUContext bound to this
thread.
This also introduce the GLContext which will contain all the GL related
functions for the current context.
# Conflicts:
# source/blender/gpu/intern/gpu_context.cc
This just set a global object responsible for allocating new objects
in a thread safe way without needing any GPUContext bound to this
thread.
This also introduce the GLContext which will contain all the GL related
functions for the current context.
For the main rationale behind this design, see 49f088e2d0. Further,
this removes users of uiBut.a1, which is a very ugly design
choice (hard to reason about).
Part of T74432.
Fix package name missmatch in a few module files. IE "ALEMBIC" was
defined in the file but the find_package commands used "Alembic"
Some modules state that they set and use the _LIBRARY variable but the
do in fact not do this. Removed these comments from those files.
Enable Clang-Tidy's `readability-function-size` rule and add a few
`NOLINT` markers to explicitly silence warnings for three functions.
These functions are huge and would IMO benefit from splitting up, but
are hard to without intimate knowledge of the code.
At least by enabling the rule, we can start tweaking the values and
refactoring other functions that bubble up as being too long/complex.
No functional changes.
Add a `NOLINT` marker to explicitly silence a warning from Clang-Tidy's
`readability-function-size` rule for the `node_type_base()` function.
This function is indeed huge, but that is because a lot of macros are
expanded. Before expansion things are still not small, but still
understandable & expandable.
No functional changes.
In the 3D View, the "Animation" keymap is not used, but the mode
specific ones. So the shortcut editing code should use these too, just
like the default keymap does.
This adds a `NOLINT` marker to explicitly silence a warning from
Clang-Tidy's `readability-function-size` rule for the `incircleadapt()`
function in `delaunay_2d.c`.
No functional changes.
This adds `NOLINT` markers to explicitly silence warnings from Clang-Tidy's
`readability-function-size` rule for versioning functions. Technically
these could be refactored and split up into smaller bits, but generally
they are hardly ever looked at once they're a few releases old.
No functional changes.
This addresses warnings from Clang-Tidy's `readability-function-size`
rule in the `source/blender/python` module.
It's just `BPyInit_bgl()` that's been split up into one or two smaller
functions per OpenGL version.
No functional changes.
For the main rationale behind this design, see 03b122e2a18df. Further,
this removes users of `uiBut.a1`, which is a very ugly design
choice (hard to reason about).
Part of T74432.
For the main rationale behind this design, see 03b122e2a18df. Further,
this removes users of `uiBut.a1`/`uiBut.a2`, which is a very ugly design
choice (hard to reason about).
Part of Part of T74432.
The current on-size-fits-all `uiBut` creates quite a mess, where it's
hard to reason about which members are free for use, under which
conditions they are used and how.
`uiBut` also has members that aren't used at times, violating the "don't
pay for what you don't use" principle.
To address this, we want to move to typed buttons, where `uiBut` is just
a base struct and each type extends it as needed. That structures data
better and type specific data is only available if it's actually used by
a button type.
Two trade-offs:
* Many casts to the derived type have to be done.
* Sometimes we change the button type after it's created. So I had to
add logic to reallocate the button for use with the new, possibly
derived struct. Ideally that wouldn't be needed, but for now that's
what we have.
Part of T74432.
Differential Revision: https://developer.blender.org/D7610
Reviewed by: Brecht Van Lommel, Campbell Barton
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule. This should be the final commit of the series of commits that
addresses this particular rule.
No functional changes.
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/draw` module. Not all warnings are addressed
in this commit.
No functional changes.
Clicking on the column header is supposed to enable sorting by this
column, or switch the sort order if already enabled.
The double-click event would be blocked by the `file.execute()`
operator, which is not supposed to act if the user clicked outside the
file list.
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/blenlib` module. Not all warnings are
addressed in this commit.
No functional changes.
This replaces header include guards with `#pragma once`.
A couple of include guards are not removed yet (e.g. `__RNA_TYPES_H__`),
because they are used in other places.
This patch has been generated by P1561 followed by `make format`.
Differential Revision: https://developer.blender.org/D8466
Follow path seems to not be catched by `BKE_object_moves_in_time`.
For this reason, we cache all transforms for all object and check
ourselves if an animation occurs. This is almost what cycles does.
We also fix the rigid body case if the rigid body use deformation.
The Pose FK mode assings the rotation origin to the boundary of the last
visited face set in the floodfill operation. In some cases, the topology
of the model may make the flood fill operation to visit a face set as the
first one (assinging it to target) and visit it again as the last one
(assinging it to origin). This will make the pose brush to default the
origin and target to the brush location and not to the face sets as it
considers that there is only one possible boundary.
This adds a GSet to ensure that a particular face set is not visited
twice in the flood fill, fixing these cases.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7984
This makes possible to choose between a local and a global simulation
when the cloth brush is used. Local simulation is the current default.
When global simulation is enabled, the cloth brush simulates the entire
mesh without taking any simulation limits into account.
This was possible before by setting the simulation limits to 10 (the
current maximum value allowed) so the entire mesh was inside the limits,
but this was a hack as the limits scale with the radius and there should
not be any limitation on how big the simulated area can be to be able to
simulate an entire object. This also allows to make a more clear
distinction between cloth brush presets that are intended to be used in
local areas to add details or globally to generate the base shape of the
mesh.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8481
This patching duplicates the first frame of the layer if the first frame number is not equals to the scene first frame number.
Related to T79567
Differential Revision: https://developer.blender.org/D8486
Some minor cleanup in the patch.
The paint_draw_cursor function was handling the cursor drawing for 2D
and 3D views of all paint modes, calculating the brush radius, updating
the SculptSession data and updating and drawing all sculpt cursor
overlays for different tools. It was almost impossible to understand when
and what was being drawn and in which state the GPU matrix was.
Now everyting is organized into different functions, with clear
separation between modes, sculpt tool overlays and different drawing
setups. Update and drawing functions are also separated (this allows to
skip one PBVH query on each cursor drawing).
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8206
The current code is accessing this from outside the gpu "namespace". As
such it should be accessing GPU_ functions, not gpu_ functions.
This is also a place to centralize the XXX message that will be
addressed upon refactor. So we can reuse this call in other places that
need the same temporary workaround.
Groundwork for upcoming fix (D8472)
In an upcoming bugfix we'll use OpenVDB data structures directly to build mesh
for sparse OpenVDB volumes, loading them OpenVDB grids earlier and removing any
references to Blender data structures makes that easier.
This also makes changes to Blender volumes to support this, so Cycles can take
ownership of a grid without Blender having to keep its own reference to it.
This should also be useful in a future Python API.
Ref D8401
Small tweaks to make labels and texts more correct, consistent and
polished.
Reviewed by: Aaron Carlisle, Julian Eisel
Differential Revision: https://developer.blender.org/D8346
Having includes in debug builds makes it possible to accidentally
break release builds.
Avoid this by moving calls to other modules out of BLI_assert.h
into BLI_assert.c
When adding multiple force fields of different types they are all called
"Field", making it difficult to tell them apart.
Lights were already named based on their type. This follows the light
code.
New names:
- Force
- Vortex
- Magnet
- Wind
- Guide
- TextureField
- Harmonic
- Charge
- Lennard-Jones
- Boid
- Turbulence
- Drag
- Fluid
- Field
Reviewed by: Julian Eisel
Differential Revision: https://developer.blender.org/D8420
Similar to T58668, labels were not aligned when multi-editing widgets
that are not center-aligned.
Reviewed by: Hans Goudey, Julian Eisel
Differential Revision: https://developer.blender.org/D8441
Align items in the edit mesh context menus (reducing padding), for
consistency with other menus.
The root layout of menus doesn't add the padding, for sub-layouts
`align` has to be enabled.
{F8749633}
Reviewed By: Julian Eisel
Differential Revision: https://developer.blender.org/D8480
This seems to be caused by a change to the logic of movieclip_get_gputexture_ptr in rB97b597c.
Differential Revision: https://developer.blender.org/D8469
This implements collisions in the solver of the cloth brush/filter. It
uses the scene colliders as a regular physics simulation.
There are still some parameters (friction, distance to the surface...)
that can be exposed as properties in later patches.
Thanks to Sebastian Parborg for helping me with the implementation.
Reviewed By: sergey, zeddb
Differential Revision: https://developer.blender.org/D8019
The panels are rebuilt when a modifier is removed so the button handlers need
to properly finish. By adding a context argument to the panel_delete function
this will happen properly.
This adds a curvature smoothing and intensify details properties to control
the result of the Sharpen Mesh Filter.
Curvature smoothing removes high frequency details from the precalculated
sharpen data, so the filter result has much smoother surfaces and cleaner
sharpen lines;
Intensify details displaces the vertices of creases and valleys in the direction
opposite to its neighbors average, so it intensifies high frequency details
in those areas, producing more noisy and sharp shapes:
Both this properties can be used in combination to achieve a good balance of
high and low frequency details depending on the shape and the desired result.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8447
Previusly it was using the / character, which implies that there is one
deformation mode and and invert deformation mode like in the other two
deformation, but squash and stretch is only one deformation mode and
does not have an invert mode.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8463
The scale deform mode includes rotation by default, so when when scaling
down a part of the models it becomes harder to control as the effect of
the rotation less predictable (similar to using trackball rotation in a
very small radius). This locks the rotation of the segment, so parts of
the model can be scaled down in a more predictable way.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8465
Steps to reproduce were:
* Open File Browser
* Create a new directory
* Cancel renaming with Esc
File selection flags were modified during drawing when the rename button
got removed, but the file name label drawing wasn't checking the
modified state.
The file.execute() operator is the one that actually opened directories
and files, not file.select() with the "open" option, as it was assumed
when changing the keymap to double-click for opening. It only acts on
the current selection though, so we have to ensure the selection is set
on the first click.
Now, some touch-pads have a delay until they register a click event, so
the double-click would be registered instead, before the selection is
set. Always select on mouse-down now and remove the unnecessary select
operator call on double-click.
The crash is caused by the fact that a NULL Object pointer is passed to
calculate the transform orientation, which has been set to normal.
A check has been include to detect the same.
Differential Revision: https://developer.blender.org/D7951
Use `td->iloc` as the coordinates of the transformed element.
It is more accurate and other transformation modes, such as scale, also
operate on `td->iloc`.
The icons are label buttons. Usually these are not editable and can not
become active. These are draggable ones though (so dragging files can be
dragged by dragging the icon) which creates an exception to this rule.
So hovering the icon would activate its label and when executing the
rename operator via shortcut it wouldn't get exited properly. This broke
the invariant of only allowing a single active button at a time.
Added an assert to check that invariant now.
Letting the code to activate the text button ensure any currently active
button is exited seems sensible.
When disconnecting links for defaulted node group inputs, recurse
into the nested node group nodes, instead of checking the socket
flag. Otherwise the behavior is confusing and differs from Cycles.
Differential Revision: https://developer.blender.org/D8455
Disabled buttons would incorrectly toggle state when a drag toggle
passed over them. This adds a check to prevent a drag toggle on disabled
buttons.
Differential Revision: https://developer.blender.org/D8476
The `rna_Scene_ray_cast()` function tried to find the current depsgraph. To
this end, it required the scene, the view layer, and bmain. Scene has a cache
of per-view-layer depsgraphs, to speed up switching between view layers. This
cache does not contain render depsgraphs, and evaluated view layers also don't
have a depsgraph here.
When a suitable depsgraph cannot be found, a new depsgraph is created. However,
this depsgraph is not evaluated, and has an unexpanded scene pointer with a
`NULL` `view_layer`. Using this then crashes Blender. Also, there was no way
for the code to get the render depsgraph.
The solution is to pass the depsgraph to the `ray_cast()` function, instead of
the view layer. This avoids the depsgraph lookup, and also works correctly when
rendering.
Some add-ons also need updating, which I'll do in the `addons`
repository soon.
Reviewed By: Sergey
Differential Revision: https://developer.blender.org/D8475
This uses the vertices per grid instead of quads to set the limit of
grids per PBVH Node. This should create more leaf nodes in lower
subdivisions levels where the duplicates count is high, producing more
uniform performance across different levels.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8454
There were two issues. First, I made a mistake when I switched from unsigned
to signed integers. Second, two classes with the same name were defined in
separate files. Those classes are in an anonymus namespace now, so that they
don't leak into other files.
ad4928a171 disabled alignment for too many cases. Still try to avoid
aligning many items, to avoid thousands of redundant alignment
calculations. But now we're much more picky adding an sub-row with
alignment.
On windows, spacebar would be passed as UTF-8 text input, despite the
control key being pressed. On macOS, there already was an explicit
exception for this (command key in this case), on Linux XInput already
handled this case for us.
Note that Alt should still allow text input, for special character
sequences.
Issue also happened in the Text Editor if a text data-block was set.
Optimization was disabled in this function to work around a bug in MSVC, use
a different solution that does not come with such a big performance regression.
In Blender 2.90 EEVEE materials were refactored that introduced crashes on Intel
GPUs on Windows. The crash happened in the `local_context_workaround` that temporary
stored compiled materials in a binary form to reload it in the main GL context.
It has been tested that the workaround isn't needed anymore for HD6xx GPUs, but it
is still needed for HD4000.
After several unsuccesfull fixes we came to the conclusion that we could not support
the local context workaround and needed to come with a different workaround. The idea
of this patch is that in these cases there is only a single context that is used for
rendering. Threads that uses these contextes are guarded by a mutex and will block.
Impact on User Level:
* Due to main mutex lock the UI freezes when rendering or baking or feel less snappy
Reviewed By: Clément Foucault, Brecht van Lommel
Differential Revision: https://developer.blender.org/D8410
As far as I can see, this problem was introduced with the gpu_free_unused_buffers() changes in rB97b597c.
The code checks the returned pointer to stop looping, but the last iteration will return the last GPUTexture and set the queue to NULL, meaning that the next pop() will crash.
Differential Revision: https://developer.blender.org/D8468
Some implementation have different maximum texture size.
This patch avoid crash when texture allocation fails when:
- trying to bake a lightcache too big for the OpenGL imeplementaion.
- loading a cache from file that is too big for the OpenGL imeplementation.
Face Sets where only set and updated on the PBVH after starting a sculpt
tool. In order to preserve the visibility they store when changing
levels, they need to be updated and sync also on PBVH creation
Reviewed By: sergey
Maniphest Tasks: T78665
Differential Revision: https://developer.blender.org/D8225
Duplicates of a grid corner adjacent to an edge which are on the
adjacent grid of the same face were not added when requested.
Needed for D8356 to work, it may also fix some other bug in Multires.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8385
The cloth brush has a defined simulated area with a falloff. In the falloff
area (the area between the dashed white circle and the exterior white
circle), simulation properties change in order to fade out the
simulation deformation effects towards the boundary.
With some brushes and stroke types (like anchored strokes with pinching
or grabbing with full strength), it is possible to apply more force than
what the boundary falloff can compensate, so the simulation breaks when
this happens.
This option pins the falloff area with softbody constraints, This
produces a much better deformation falloff and it is no longer possible
to move the vertices near the simulation boundary, so the simulation
won't break no matter the strength of the forces applied inside the
simulated areas.
This is an option as it is particularly useful for some brushes to add
localized details, but for brushes that are supposed to deform the
entire mesh (like the grab brush in D8424), this can add unwanted
softbody constraints that affect the simulation result.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8435
Box mask is not a selection, so it should not be part of the select
operator. This allows to add more sculpt mode specific functionality and
properties and to share more code with the lasso mask operator in a
later refactor.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8456
When switching workspaces we need to have an unused screen layout that
we can activate. The other window now showed the only available screen
layout in fullscreen though.
Usually when there's no unused screen layout we duplicate an existing
one, but that code didn't respect the fullscreen case properly.
This also tries to clean up the logic a bit, but things are still rather
complicated to follow.
Changes in this code are always risky. Of course things worked fine in
my tests, but I wouldn't be surprised if something breaks.
Filtering Collections when also filtering object children would only
display the parent object. Add a check for the NO_CHILDREN filter before
creating the object-parent hierarchy.
The winding order of the faces changes when flipping the faces.
This lead to the loop indices changing as well.
Now we take this into account when restoring and flipping the custom
normals. Before the normals would be swapped.
The winding order of the faces changes when flipping the faces.
This lead to the loop indices changing as well.
Now we take this into account when restoring and flipping the custom
normals. Before the normals would be swapped.
The problem in this case was that the flag for active fire was not set. With hidden flow sources the flag was not updated in update_flowsflags().
The solution for this is to take the active field from the config cache file.
Previously a for loop with two iterations was used to calculate the
3D segment locations for the input number and the higher power of 2.
Splitting off the inside of the for loop to a separate function makes
the code more readable.
This commit also includes a simple timer for bevel, enabled with a
define. Interestingly, the cleanup in this commit happended to give
a 3% speedup on a Ryzen 3700x for a bevel calculation with 64
segments.
Same exact system as instancing on vertices for a mesh. More powerful ways
of instancing will be added at some later point, but this makes the basics
works and is consistent with other geometry types.
The tests were broken because of an extra call to
RNA_def_struct_name_property which set the name of the velocity
attribute to be the string used to identify CacheFiles in
bpy.data.cachefiles.
When changing the material while the properties editor temporarily isn't
visible (e.g. because another editor is in full-screen or a different
workspace is active), the preview wouldn't be updated on changes.
Always trigger a material preview update on screen layout or editor type
changes.
When changing the material while the properties editor temporarily isn't
visible (e.g. because another editor is in full-screen or a different
workspace is active), the preview wouldn't be updated on changes.
Always trigger a material preview update on screen layout or editor type
changes.
The data member `new` was conflicting with the `new` keyword
when `BKE_screen.h` was included in C++ files.
Reviewers: sergey
Differential Revision: https://developer.blender.org/D8459
Caused by rB63ee3db96107.
While above commit corrected the clip offset, it also removed logic to
ensure a marker on a particular frame. This is needed though, otherwise
changes on a particular frame are applied to the marker being returned
by 'BKE_tracking_marker_get' which can be a completely different marker
if none exist for that frame yet.
This patch partly reverts rB63ee3db96107 and reintroduces the framenr
for the MarkerUpdateCb and uses that to ensure a marker on that frame.
Candidate for backporting to 2.83 LTS?
Reviewers: sergey, jacqueslucke
Subscribers:
Before: If the current frame is out of the cache start/end range, the viewport will show the fluid as it was on the last frame that was still in the cache frame range.
Now: If the current frame is out of the cache start/end range, the viewport will show no fluid at all (even if there are cache files present for this frame).
This fix is related / in response to T79423.
The decomposed transform would have consists of nan values if the input
transform had zero scale.
Now the decomposition will check for zero scale, and if it is detected
then the result will be ensured to be finite. Additionally, rotation
value will be copied from previous/next time step to help avoiding
obscure interpolation.
The latter step can become more comprehensive than the current simple
implementation.
Differential Revision: https://developer.blender.org/D8450
This will make it easier & cleaner to make custom-built depsgraph (for
example for exporting invisible objects to USD or Alembic, see T75936).
No functional changes.
Reviewed by: sergey
Differential Revision: https://developer.blender.org/D8423
This flag specifies that even when the socket is not connected,
the node should not display the input field for the constant input
value. This is useful for inputs like Normal, which have special
handling for the missing input case and don't use a constant value.
Currently there is no way to change this flag from Python, and
through UI it can only be done by re-creating the socket.
This patch exposes the flag through RNA and UI, makes sure it
is properly updated when changed, and adds special handling to
ensure that it is correctly set when creating a node group from
a node set that includes reroute nodes.
Differential Revision: https://developer.blender.org/D8395
Instead of assuming the node width, compute the actual right bound.
Otherwise BSDF nodes tend to be too wide, and intersect Output.
Differential Revision: https://developer.blender.org/D8395
Avoid the conversion for the hook modifier as riggers
may need to enable this modifier in edit-mode.
The speedup of the modifier alone is significant since the hook
operation is simple compared to conversion that took over 99.9%
of the time in my tests, however the overall speedup was around to 1.6x.
The bevel code initialized the CurveProfile with the "higher power of 2"
segments after the normal number of segments, leaving the widget in an
incorrect state after the calculation. A simple fix is to re-order the
initializations, doing the input number second.
'Default' actually means 'Keep Existing' and it makes more sense to
display the more descriptive label.
Differential Revision: https://developer.blender.org/D7614
Fixes T78346.
The shortcut display and change code is context sensitive. To make it
work correctly the context needs to be set properly.
When executing operators from the dropdowns, the active region is the
header, but the shortcut handlers are set for the main region. So make
sure that is used instead.
This also sets the main region active for context menu operators, where
this issue shouldn't be present. Doing it anyway shouldn't hurt though
and fixes this issue in case somebody displays the context menu in the
header as dropdown too.
Instead of clearing forces at the end of the simulation step, they will now be cleared before writing to them, i.e. at the beginning of a step.
Also cleaned up minor areas that I looked at while making this change.
Following work done in 2.83, the resolution control is now a real
level-of-detail parameter. It is now useful to be able to set the
resolution for display independently from render. This is true for
both mesh generation and mesh deformation modes.
For compatibility with old scenes, resolution is retained and is the
render resolution. Old modifiers loaded have the value of resolution
also applied to viewport resolution. This allows newer modifiers to
be used in older versions without trouble
Differential Revision: https://developer.blender.org/D8336
The text colors set by the general widget state function
(`widget_state()`) would always be overriden by the menu-back text
colors to avoid contrast issues. This would only respect the selected
state, not other states.
Address this now by changing the input theme colors to use the menu-back
ones, rather than overriding after the fact (calling `widget_state()`).
Changing the surface distance through the flow type is inappropriate here. It had been added to ensure that liquids / smoke use a different emission value.
Now the value will only be changed when changing from a gas to a liquid emitter or, vice-versa, when changing from a liquid to a gas emitter.
There is a parameter typo in Python API document about bpy.props.StringProperty.
This patch fixes this.
Also this patch should apply to 2.90 branch as well.
Reviewed By: Grische, mont29
Differential Revision: https://developer.blender.org/D8430
Code required the tabs to be placed in an aligned region. Code should
work fine even for unaligned regions though, so I don't see a reason to
forbid this.
This patch adds the ability to render motion blur from Alembic caches.
The motion blur data is derived from a velocity attribute whose name has
to be defined by the user through the MeshSequenceCache modifier, with a
default value of ".velocities", which is the standard name in Alembic
for the velocity property, although other software may ignore it and
write velocity with their own naming convention (e.g. "v" in Houdini).
Furthermore, a property was added to define how the velocity vectors
are interpreted with regard to time : frame or second. "Frame"
means that the velocity is already scaled by the time step and we do not
need to modify it for it to look proper. "Second" means that the unit
the velocity was measured in is in seconds and so has to be scaled by
some time step computed here as being the time between two frames (1 /
FPS, which would be typical for a simulation). This appears to be
common, and is the default behavior.
Another property was added to control the scale of the velocity to
further modify the look of the motion blur.
Reviewed By: brecht, sybren
Differential Revision: https://developer.blender.org/D2388
The hardcoded age limit is now gone. The behavior can be implemented
with an Age Reached Event and Kill Particle node. Other utility nodes
to handle age limits of particles can be added later. Adding an
Age Limit attribute to particles on birth will be useful for some effects,
e.g. when you want to control the color or size of a particle over its
life time.
The Random Float node takes a seed currently. Different nodes will
produce different values even with the same seed. However, the same
node will generate the same random number for the same seed every
time. The "Hash" of a particle can be used as seed. Later, we'd want
to have more modes in the node to make it more user friendly.
Modes could be: Per Particle, Per Time, Per Particle Per Time,
Per Node Instance, ...
Also a Random Vector node will be useful, as it currently has to be
build using three Random Float nodes.
Find free slot first for sound strips then for movie strips.
This patch also fixes issue where all strips were added to channel 2 by default.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8339
As creator.c is used for the 'main' function,
avoid obscure declarations being placed so prominently.
- Move Blender as a Python module declarations into it's own section.
- Move USD declaration to an 'extern' just before it's called.
Previously, there were only particle-birth and time-step events.
Now the solver can handle custom events. On the user level
this does not change anything yet. This feature of the solver
will be used by an upcoming Age Reached Event node and
possibly others. When this node exists, I can finally remove
the hardcoded maximum particle age.
The abbreviation 'init' is brief, unambiguous and already used
in thousands of places, also initialize is often accidentally
written with British spelling.
Yet another update to ensure that pointer variables are always up to date, i.e. those referencing the memory allocated by Mantaflow. Outdated pointers usually show up through flickering in viewport.
The weight must be added only to the real points, not to the autogenerated points by modifiers. This affects, not only to subdivide, but to any modifier that generate points.
In f2b04302cd the pointer update was refactored. It was sufficient to update pointers just in replay mode at the end of a step since the 'ensure()' functions from manta_fluid_API.cpp had their own pointer update call. These were removed in 51f4bee5a5, however, and so in order to still have some sort of update, the given update call needs to be available to all cache types.
Required for the new boolean code, disabled by default
until all platforms have landed the libs and the boolean
code actually lands in master.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8384
Caused by c7aa0f9d74.
Since above commit, BKE_image_user_frame_calc requires an image (not
just the iuser) to get the framenumber.
Cycles used to call this with NULL image (in `image_user_file_path` and
`image_user_frame_number`), now pass the image as well.
Maniphest Tasks: T79111
Differential Revision: https://developer.blender.org/D8439
A collection of multiple changes that had been living in my stash:
- Use nullptr instead of NULL in C++ files
- Removed unused/deprecated functions from headers
- Cleared animatable flag in cache UI
- Comment cleanups
Use static_cast() where possible and refresh pointers for every frame when in replay mode. The latter is particularly important as this seems to have caused the issue where smoke in the viewport was flickering when loading data from pointers after loading them from disk for the frame before (e.g. when resuming a bake job).
Add our own copy of the gtest discovery scripts from CMake a few reasons:
* Use the very latest version which supports PRE_TEST for Windows
* Fix usage of [] symbols in file paths that fail with the zsh shell
* Disable asan leak checker when discovering tests
This means Windows also no longer requires the very latest CMake 3.18.
The root of the issue comes to the fact that sub-data pointers were
used to match strips before/after copy-on-write. The undo system might
re-use sub-data pointers after re-allocating them, making it so that,
for example, pointer used by sound strip is later re-used by video
strip.
This fix takes an advantage of recently introduced per-sequence UUID
and uses it to match sequences before/after copy-on-write.
Will trigger code paths which makes sure UUIDs are generated and
are unique.
Enabled with --debug-depsgraph-uuid (which is also implied by
--debug-depsgraph).
This is the first step for having sequences covered with session UUID
with the goal to remove code which uses original sequence pointer to
match sequences.
Currently this UUID is maintained on file load, allocation and leaf
duplication function.There are more cases to cover and ensure UUID
is re-generated or re-used when needed. It will be done as follow-up
development.
Allows to use pre-defined structure for session UUIDs in all data
structures which needs it: pose channels, sequencer strips, modifiers.
The goal of all this is to have a reliable way of matching original
and copy-on-written versions of data, so that it's possible to
preserve runtime caches.
button
This was reported for the FCurve modifier restrict ranges, but might fail
elsewhere, too. Reason is that the post_but has its range (hardmin/
hardmax etc) set before the updates to the active button take place, so
changes here dont end up on the post_but (even though the RNA range
function is properly called for a new defined button - new one is not the
same as the post_but though).
Now update the ranges on the post_but when that gets active.
Fixes T78763
Maniphest Tasks: T78763
Differential Revision: https://developer.blender.org/D8265
These were added in rB146473f08335e8cb774ccaf1baad82a1d308fbe1 however
there were a few errors with the labels:
1. Underscore in label
2. Abbreviation when not needed
This bumps the minimum requirement for cmake from 3.10 to 3.18 on windows
if `WITH_GTESTS` is enabled.
Reviewed By: sergey brecht sybren campbellbarton
Differential Revision: https://developer.blender.org/D8405
Collection instance datablocks were not filtered out when only showing
the selected object. They were treated as a collection (which should
show when filtering objects). Adds a case to check if the parent is an
object.
This patch adds a new compound shape entry to the shape selection
dropdown. It also corrects wrong inertia calculation for convex hulls,
that resulted in strange behavior for small objects.
The compound shape take the collision shapes from its object children
and combines them. This makes it possible to create concave shapes from
primitive shapes. Using this instead of the mesh collision shape is
often many times faster.
Reviewed By: Sergey, Sebastian Parborg
Differential Revision: http://developer.blender.org/D5797
Description of `USER_HEADER_SEARCH_PATHS` build setting:
"
This is a list of paths to folders to be searched by the compiler
for included or imported user header files (those headers listed
in quotes) when compiling C, Objective-C, C++, or Objective-C++.
Paths are delimited by whitespace, so any paths with spaces in
them need to be properly quoted. See Always Search User Paths
(Deprecated) (ALWAYS_SEARCH_USER_PATHS) for more details
on how this setting is used. If the compiler doesn't support the
concept of user headers, then the search paths are prepended to
the any existing header search paths defined in Header Search
Paths (HEADER_SEARCH_PATHS).
"
http://help.apple.com/xcode/mac/current/#/itcaec37c2a6
Xcode doesn't use `HEADER_SEARCH_PATHS` for auto-complete. Only the
header files in the same directory as the current file are suggested.
CMake as of now correctly sets `SYSTEM_HEADER_SEARCH_PATHS` and lumps the
rest in `HEADER_SEARCH_PATHS`. The standard way is to use
`USER_HEADER_SEARCH_PATHS` & `SYSTEM_HEADER_SEARCH_PATHS` and let
`HEADER_SEARCH_PATHS` be used as a fallback for compilers which do not
distinguish between `<*.h>` and `"*.h"` syntax.
So set `USER_HEADER_SEARCH_PATHS` to the include paths specified
in the `CMakeLists.txt` files of all targets.
Caused by {rBa1a333a1e92e}
`BKE_sequencer_prefetch_get_original_sequence` cant get a sequence in
`BKE_sequencer_cache_put`.
rBa1a333a1e92e moved multiple NULL checks (including the one checking
seq) above BKE_sequencer_prefetch_get_original_sequence (this should
never return NULL really, but this is for another fix).
So solution suggested by @ISS is to just stop prefetching all together
before changing content of seqbase.
Maniphest Tasks: T79357
Differential Revision: https://developer.blender.org/D8421
- add the use of DRWShaderLibrary to EEVEE's glsl codebase to reduce code
complexity and duplication.
- split bsdf_common_lib.glsl into multiple sub library which are now shared
with other engines.
- the surface shader code is now more organised and have its own files.
- change default world to use a material nodetree and make lookdev shader
more clear.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D8306
Previously, deform brushes were modifying the final positions in the
simulation directly, which was causing all sorts of artifacts in the
deformed area and problems with other features of the solver.
Now these brushes deform a separate array of positions and the solver
adds constraints to them, so the real vertices are moved when solving
the constraints. This prevents those artifacts and gives the brush a
much better behavior.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8424
The cloth brush builds the constraints when the stroke starts usign the
current state of the mesh. This means that deformations profuced by the
simulattion will accumulate after multiple strokes as it will always
start from the previous deformed state. While this is useful in many
cases, for other uses it is convenient to always simulate the same
initial shape, but applying different forces to it.
The persistent base options work like the persistent base in the layer
brush and allows the cloth brush to not accumulate deformation after
each stroke. When enabled, constraints are created for the shape stored
in the persistent base instead of from the current state of the mesh.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8428
Fix several issues in CLOG code:
* In `clg_str_reserve`, allocated memory may be bigger than requested
one, do not assign the latter back to `cstr->len_alloc`.
* `clg_str_vappendf` was mis-interpreting returned value from
`vsnprintf`, and completely mixing total allocated memory and extra
needed amount of memory to allocate...
Simplified code of `clg_str_vappendf` to only have allocating code
handled in one place, makes things easier to follow too.
Think this should also be beckported to 2.83.
This is part of T79273 where separating a stroke would result in
multiuser gpencil data for the original object.
Real underlying issue seems to be that gpencil multiuser objects (also
the ones created by Alt+D duplicating) have a problem evaluating
modifiers correctly [this will need further investigation].
Not sure if this is a limitation of D5470?
This patch only corrects the usercount on separating [which already fixes
the scenario reported because singleuser gpencil modifiers work
correctly].
Note: we could have also called `ED_object_add_duplicate` with the
`USER_DUP_GPENCIL` dupflag -- that would have taken care of the usercount
--, but then the whole following logic in `gpencil_stroke_separate_exec`
would need to change from **adding** layers/frames/strokes to
**removing** these.
Part of T79273
Maniphest Tasks: T79273
Differential Revision: https://developer.blender.org/D8419
This is in order to disolve GPU_draw.h into more meaningful code blocks.
All the Image related function are in `image_gpu.c`.
All the MovieClip related function are in `movieclip.c`.
The IMB module now has a connection with GPU. This is not strickly
necessary and the code could be move to `image_gpu.c` if needed.
The Image garbage collection is also ported to `image_gpu.c`.
This property adds constraints to the simulation using the initial
location of the vertices, making it behave like a soft body. The
strength of these constraints can be modified with the brush parameter.
This makes some deformation modes more subtle and predictable, making it
possible to use the cloth brush to add surface detail in a more
controllable way without loosing completely the original shape of the
mesh.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7845
This uses mesh's runtime mutex for both `BKE_mesh_runtime_looptri_ensure`
(was using its own global RW mutex before), and `BKE_mesh_wrapper_ensure_mdata`
(was not protected at all before).
This is more like a band-aid than a proper fix, as mentioned in the report
proper fix would be for the modifier to request those data (the relevant
BVHTree, which would implicitely also call the tow others) through flags,
just like it does for regular CDData layers. But this is a much bigger
refactor to be done outside of bugfix scope.
Reviewed By: sergey
Maniphest Tasks: T78285
Differential Revision: https://developer.blender.org/D8415
Previously, gravity was only applied in the real brush radius, not in
the whole simulation radius. For most deformation modes, applying
gravity to the entire simulation instead of just to the brush radius and
scaled by the radius (like a regular sculpt brush) makes more sense.
After this fix and with the cloth collisions patch applied, it is possible
to do things like this with the cloth grab brush.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8406
As the comment says, anchored stroke can't rely on the first stroke
iteration for creating the simulation data. Probably lost in a cleanup.
I also made that anchored stroke doesn't restore the mesh state in the
cloth brush, so it can create the simulation effect.
Reviewed By: sergey
Maniphest Tasks: T79054
Differential Revision: https://developer.blender.org/D8348
The final render will use scene resolution in this case.
For example, when Color Input is plugger to preview and composite output
nodes, final render will flood-fill the final image which is a size of
scene resolution with this color. Before this fix the node preview was
empty. After this fix the node preview will be flood-filled with the
color.
Fixes T78586
Differential Revision: https://developer.blender.org/D8263
Were two issues:
- Divider was calculated in integer domain, causing rounding issues in
general case, and causing singularity in a corner case when input is
smaller than the preview size.
- The resolution was scaled down by 1 pixel for no obvious reason.
it's good to have an option to ' pin' a mode to the brush, to use that mode always, independent of the current viewport selected mode.
{F8723224}
Reviewed By: pepeland
Differential Revision: https://developer.blender.org/D8399
81a002
This was fine in those cases with current code, but that kind of
assumption is always risky, and an open door to hard-to-track bugs when
code changes in the future...
This is also a bit of code cleanup, reorganisation.
Tried to be DRYed but avoid too much code change to (hopefully) minimize
breakage.
- GPU: remove TEXTARGET_CUBE_MAP, this is no longer used in the codebase.
- GPUTexture: Move compressed texture upload to gpu_texture.cc
- GPUTexture: Add per texture Anisotropic filtering switch
Before, when extrude a point, the extruded point is considered as the first point of the stroke, but this was not logic.
Now, the extrude point is considered as last.
Related to T79313
Use 'emboss' instead of 'draw_type' as enum, layout & functions use
the term emboss.
This issue was noted by @Poulpator in D8414, as `dt` is also an
abbreviation for delta-time.
Build a temp matarray storing materials from obdata and source object
(depending on slots 'allocation' of source object), and assign those to
targets.
Also remove limitation of 'using same obdata is forbidden', just never
edit obdata materials in that case...
Certainly not perfect, but already much better than existing code.
The fisheye camera setup causes the edges of the image to not shoot primary rays. This was not
respected by OptiX because of an optimization that tried to reduce conditionals around trace calls.
Removing that does not seem to have an impact on performance anymore however and it fixes
the issue.
A face must have area in order to be possible calculate interpolation weights.
The same to the reference UVs.
But the new faces created with the extrude operator, have no area (before moving).
The solution was to get the loop data from some neighbor face.
Differential Revision: https://developer.blender.org/D8278
Keeping face attributes connected is now optional.
Keeping UV's connected is useful for organic modeling, but bad for
architectural.
Differential Revision: https://developer.blender.org/D8360
This bumps the minimally required CMake version from 3.5 to 3.10, as
discussed in D8405.
Since D7649 landed, there has been the `gtest_discover_tests()` call to
discover individual unit tests in `bin/tests/blender_test`. This
function was introduced in CMake 3.10.
Since there were no complaints about this incompatibility, I suspect
that a newer version is already in use by the majority of the
Blender-building people.
When an object is moved only by the rigid body physics system, the
function `BKE_object_moves_in_time()` will incorrectly return `false`.
This commit adds a comment to make this behaviour more explicit.
No functional changes.
The root cause was that `BKE_object_moves_in_time()` incorrectly returns
`false` when an object is moved by the physics system.
This also fixes the same issue in the USD exporter.
This was done for the regular dopesheet in rB9ccc73ade8a2, this just
makes that label consistent across all anim views.
Differential Revision: https://developer.blender.org/D8255
rna_EffectorWeight_path() needs to point to "domain_settings" (instead
of "settings"), was a missing change when switching the FluidModifier to
mantaflow.
Maniphest Tasks: T79264
Differential Revision: https://developer.blender.org/D8398
Setting the environment variable `PXR_PATH_DEBUG` non-empty will make the
USD library print the directories it uses to find its JSON files. This can
aid in debugging when this unit test fails. Now the failure message also
tells you about this.
No functional changes.
Move the common entries (View and Area) into a static method to be
called from other menus to avoid duplicating the New Collection and ID
Paste operators.
Previously, mesh boundaries were relaxed as any other vertex, which was
causing artifacts and unwanted deformation. In order to prevent this,
the mesh filter was using the automasking system to lock the boundary
vertices, which was hacked into the tool. For the brush, the only
solution was to enable boundary automasking to lock those vertices
in plance.
Now the relax vertex function slides the boundary vertices along the
mesh boundary edges, relaxing all the topology correctly while
preserving the shape of the mesh. The automasking hack in the relax
mesh filter was also removed as now vertices slide correctly along
the boundary.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8350
All these data arrays are created for a specific topology, so they should be
freed and updated when the PBVH rebuilds. Previously, this was only
happening when freeing the SculptSession, but it also needs to happen in
BKE_sculpt_update_object_before_eval to avoid reusing out of date data.
Reviewed By: sergey
Maniphest Tasks: T79074
Differential Revision: https://developer.blender.org/D8357
When there is no color layer available,
BKE_sculpt_update_object_for_edit creates a new one and tags the mesh
with ID_RECLAC_GEOMETRY, so this layer is inmediatly available when the
tool starts. This also deletes the PBVH and when it is created again in
BKE_sculpt_update_object_after_eval, the pmap is not initialized, making
the tool crash.
This moves the color layer creation to a separate function outside
BKE_sculpt_update_object_for_edit, which now runs after the color
layer is available, so it won't need to update again and the pmap will
still be available when the tool is used.
Reviewed By: sergey
Maniphest Tasks: T78242
Differential Revision: https://developer.blender.org/D8135
The buildbot uses a separate `CMAKE_INSTALL_PREFIX`. This means that
the unit test could not find its USD JSON files in the build directory.
Using `${CMAKE_INSTALL_PREFIX}` instead of `$<TARGET_FILE_DIR:blender>`
solved this.
This commit reverts the "noindex" part of the original commit.
using noindex made it imposible to link to a specific property.
The original warnings do not pose an issue so until a proper solution is
found I am reverting this commit.
This reverts commit 953c232db3
MSVC does need the wholearchive flag but it was not set,
so no tests were actually linked into the binary.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D8404
Some modes were working by mere chance in that ugly 'reversed' case, but
the to/from selection modes were not properly swapped...
Should also be safe for 2.83.
In the situation where the precompiled libraries are used on Linux +
GCC, a version of GCC older than 9.3 is guaranteed to cause problems.
This just implents a fatal error message when we know it doesn't make
sense to continue. We could do more checks and add some warnings, but
it's very likely that these will be ignored amongst the other noise.
Reviewed By: sergey, brecht
Differential Revision: https://developer.blender.org/D8396
The following nodes work now (although things can still be improved of course):
Particle Birth Event, Praticle Time Step Event, Set Particle Attribute and Execute Condition.
Multiple Set Particle Attribute nodes can be chained using the "Execute" sockets.
They will be executed from left to right.
Showing the Python error without any explanation is often
not enough information and doesn't hint that the error was in the
user input.
The error report from a invalid expression such as '..1' used to be:
('invalid syntax', ('<string>', 1, 1, '..1'))
Now reads:
Error evaluating number, see Info editor for details: invalid syntax
Address issue raised by T78913.
The result of syntax errors read poorly in reports,
resulting in cryptic and unhelpful information.
Change PyC_ExceptionBuffer_Simple only to extract the initial text,
making syntax errors when entering invalid numeric expressions into
buttons easier to follow.
This operator cleanup any frame that is equal to the previous one. This is very handy when convert a mesh animation to Gpencil and the mesh is static for several frames.
Differential Revision: https://developer.blender.org/D8149
This makes `RNANodeQuery::construct_node_identifier()` more strict in
its matching of certain property names.
The downside of this approach is that it's not possible any more to use
`"rotation"` and expect a match for `"rotation_euler"` and friends, so
the list of strings to test against is now 3x as long.
Reviewed By: sergey
Maniphest Tasks: T79121
Differential Revision: https://developer.blender.org/D8375
The complete lack of a transform panel was confusing enough to spawn
this question: https://blender.stackexchange.com/q/169074/599
Displaying a message instead of nothing is more consistent with the
behavior of the mesh transform panel anyway.
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D8390
New option that lets users the define the maximum number of fluid particles that will be allowed in the simulation. This can come in handy, for example, to ensure that the particle count will not exceed the hardware capabilities, or to avoid excessive amounts of particles in a scene.
New option that lets users the define the maximum number of fluid particles that will be allowed in the simulation. This can come in handy, for example, to ensure that the particle count will not exceed the hardware capabilities, or to avoid excessive amounts of particles in a scene.
This is handy to add support for enums used in both C and C++
files. This removes the need to typecast each time for every
operation.
Only support bitwise operators for now.
Operator logic is limited to iterating over selection and executing
same code as python API does.
Functional changes:
- No attempt to preserve effects is made. Dependant effects are deleted.
- No attempt to change meta strip boundaries.
Partially fixes T73828
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D6892
Add recursion check before assigning strip as a mask for modifier.
Same check is used for recursion check when reassigning effect input, so it
should not be possible to create recursion at all.
Sequencer was not initialized yet, and RNA update function tried to clean up cache.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8323
This operator automates the following steps:
1. Create a point cloud object.
2. Create a simulation data block.
3. Add a small particle simulation to the node tree.
4. Add a Simulation modifier to the point cloud object.
5. Reference the particle simulation from the modifier.
You have to go back to frame 1 to start the simulation.
The simulation is not yet cached and cannot be rendered.
The bounding box of the point cloud object is enabled for now,
because otherwise it is hard to select the object.
The OptiX kernels are compiled for target "compute_sm_52", which is only available on second
generation Maxwell GPUs, so disable support for older ones.
A particle action is some function that is triggered by some event.
Right now, users cannot control this. There is just a
randomize-velocity on-birth action. So the direction of spawned
particles is slightly randomized now.
This also adds a new integer attribute called "Hash" which is
useful for a number of things. Mainly for generating random numbers
for a specific particle. The ID of a particle is not necessarily a good source
of randomness.
When definining static variables that own memory, you should
use the "construct on first use" idiom. Otherwise, you'll get
a warning when Blender exits.
More details are provided in D8354.
Differential Revision: https://developer.blender.org/D8354
This is a convenience wrapper for `Map<Key, Vector<Value>>`.
It does not provide any performance benefits (yet). I need this
kind of map in a couple of places and before I was duplicating
the lookup logic in many places.
This is a continuation of fix for T78307. Turns out instancing do not
work at all, so enforce single widget drawing on macOS and Intel GPU.
It was also reported that certain AMD and Mesa driver suffer from
similar issue, so disabled instancing for this configuration as well.
Differential Revision: https://developer.blender.org/D8374
When "ID Data" -> "Make Single User" is chosen with selected elements
that are not curves, there is a crash. This fix ensures that the id in the
callback function is an Action.
Once the base pose was changed (e.g. by changing the active landmark), we'd always run the logic to reset to the base pose. That would mess up the final viewer pose.
Think this only got exposed through 607d745a79.
When interpolate, the temp frames are tagged, and later removed. If for any reason any stroke was tagged in other area of Blender (this tag is used for temp tagging), the stroke could be removed by error when run interpolation.
In a previous fix, the tag was cleared before, but only for the frame range of the interpolation. Now, the clear is done for all frames.
Also, instead to clear for each stroke sampling, now it's done only once at invoke time.
Pretty straight-forward, although it does not rebuild relationships
(this is a heavy process we do not want to automate for now, will be a
separate operator in near future).
Fix T78179: Library Overrides - Additional geometry not updating without reloading scene.
Once again, we need lots of unatural twisting and convolutions to get
those nasty things to work...
Note that in previous versions of Blender, this would not crash, but was
still broken (shapekeys were never actually reloaded from libraries).
This is a change I pulled from the property-search-ui branch,
where I have to use the list of tabs to search the inactive tabs
and it makes more sense to use the array directly.
It is also an improvement to have this fundamental code to the
properties editor in the editor code rather than an RNA callback.
There are no functional changes.
Differential Revision: https://developer.blender.org/D8368
The extra depsgraph relations that were added to prevent threading
issues during evaluation (rB4c30dc343165) caused a considerable slowdown
on complex scenes with many drivers (T77277, T78615). This commit
improves this as follows.
Only the following drivers are considered for execution serialisation:
- Drivers on Array elements, and
- Drivers on Boolean or Enum properties.
Relations between drivers of the same arrays are added blindly, i.e.
without checking for transitive or cyclic relations. This is possible as
other relations will just target the `PROPERTIES_ENTRY` or
`PROPERTIES_EXIT` nodes.
Checking whether a driver is on an array is first done by checking
`array_index > 0`, and then falling back to resolving the RNA path to an
RNA property and inspecting that.
The code also avoids circular dependencies when there are multiple
drivers on the same property. This not something that is expected to
happen (both the UI and the Python API prevent duplicate drivers), it
did happen in a file (F8669945, example file of T78615) and it is easy
to deal with here.
Reviewers: sergey
Subscribers: mont29
Comment update
This means that we delete all override properties except for those over
ID pointers *if* the assigned pointer matches the linked data hierarchy.
Then we reload affected datablocks.
Regression from d6cefef98f
This also fixes an unreported issue where finding an exact match
wasn't being detected for items that contained an ID prefix.
A simulation data block has an embedded node tree, which requires
special handling in a couple of places. Some of those places were
missing beforehand.
This also adds a relation to make sure that the simulation is evaluated
after animations on the embedded node tree are evaluated.
High quality emitters need to maintain state themselves. For example,
this it needs to remember when it spawned the last particle.
This is especially important when the birth rate is changing over time.
Otherwise, there will be very visible artifacts.
It is quite likely that other components of the simulation need their own
state as well. Therefore, I refactored the `SimulationState` type a bit,
to make it more extensible. Instead of using hardcoded type numbers, a
string is used to identify the state type. Also, instead of having switch
statements in many places, there is a new `SimulationStateType` that
encapsulates information about how a specific state is created/freed/copied/...
I removed the integration with the point cache for now, because it was
not used anyway in it's current state.
* Changing to a landmark moves the view exactly to it, rather than
keeping the current position offset.
* Disabling positional tracking moves the viewer back to the landmark
position.
This is a more predictable and practical way to use landmarks. See
feedback in T71347.
On the code side, I did some cleanup so the logic flow is more clear.
Note: This is entirely untested. I currently don't have access to a
device. There might be issues, tomorrow I'll hopefully get feedback.
This adds extra deform modes to the slide mode of the Topology
Slide/Relax brush (both slide and smear are almost identical).
This is useful to move topology to a specific area to add more localized
details
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8349
This allows to use pen pressure modulation in hardness, wet mix, wet
persistence, flow and density, as well as inverting the modulation (more
pressure, less density...). With this, it is possible to create brushes
that mix paint or apply a new color based on the pressure.
Reviewed By: sergey, campbellbarton
Differential Revision: https://developer.blender.org/D8267
This matches the change that was done to the bevel modifier so that the
interface for the modifier, the active tool, and the operator are consistent.
This commit extends the refactor to the bmesh implementation too, so
that the parameters in the implementation don't stray too far from what
is exposed.
Tests are adjusted and still pass.
Both to_v and form_v need to be included. From_v is needed to include
the active vertex when there is only one vertex in the radius of the
brush, to_v needs to be included to add all grids duplicates
Reviewed By: sergey
Maniphest Tasks: T79056
Differential Revision: https://developer.blender.org/D8347
The custom smooth functions for bmesh and meshes where removed and
replaced by a generic smooth function using the sculpt API, which needs
to initialize the bmesh indices in order to be used
Reviewed By: sergey
Maniphest Tasks: T79007
Differential Revision: https://developer.blender.org/D8333
Implementation of lerp without a function requires repeating one of
the arguments, which is not ideal. To avoid that, add a new function
to the driver namespace. In addition, provide a function for clamping
between 0 and 1 to support easy clamped lerp, and a smoothstep function
from GLSL that is somewhat related.
The function implementations are added to a new bl_math module.
As an aside, add the round function and two-argument log to the
pylike expression subset.
Differential Revision: https://developer.blender.org/D8205
Object sockets work now, but only the new Object Transforms and the
Particle Mesh Emitter node use it. The emitter does not actually
use the mesh surface yet. Instead, new particles are just emitted around
the origin of the object.
Internally, handles to object data blocks are passed around in the network,
instead of raw object pointers. Using handles has a couple of benefits:
* The caller of the function has control over which handles can be resolved
and therefore limit access to specific data. The set of data blocks that
is accessed by a node tree should be known statically. This is necessary
for a proper integration with the dependency graph.
* When the pointer to an object changes (e.g. after restarting Blender),
all handles are still valid.
* When an object is deleted, the handle is invalidated without causing crashes.
* The handle is just an integer that can be stored per particle and can be cached easily.
The mapping between handles and their corresponding data blocks is
stored in the Simulation data block.
Adjusting the layout for this modifier is the final part of the modifier UI
project for 2.90. This layout exposes the most important information,
the levels and subdivision controls, by default, putting other contols
in collapsed subpanels.
Note that there is empty space for the "Delete Lower" button
that is still planned for 2.90. And there will also eventually be more
items added to the "Shape" panel, maybe for 2.90.
Differential Revision: https://developer.blender.org/D8187
Operators are one of the last places in Blender to use older UI designs
that don't fit in with recent style conventions. This commit updates
these custom operator UI callbacks for consistency and clarity.
Some of the code is also simplified a lot. Some of the older operator layouts
were much more complex (in terms of code) than they needed to be.
See the differential revision for a before and after screenshot
of each operator.
Differential Revision: https://developer.blender.org/D8326
Currently if you drag and drop an item from the outliner elsewhere in
the Blender window, the outliner will scroll the entire time, even if the
mouse is far away. This commit adds optional behavior for the edge pan
operator that makes it only act if the mouse is close enough to the region.
Differential Revision: https://developer.blender.org/D8193
When overriding a whole linked collection from a single object in
3DView, said 'reference' object would be removed by code. We only want
that behavior when overriding from an instanciating Empty.
It looks like the code left this as a todo, but the basic solution is to
add an extra parameter to BKE_bose_rest to check whether bones
are selected before reseting them.
I also corrected the operator description which said it acted on only
selected bones even when there is an option to turn that off. The
"act on selected" is generally implied for Blender's operators anyway.
Differential Revision: https://developer.blender.org/D8319
The function is called for all writers, not just 'object' writers.
Furthermore, it's called by the function `release_writers()`, so now the
name is consistent with that as well.
No functional changes.
The unit tests for `bf_io_common` didn't actually link against
`bf_io_common`, so when both USD and Alembic were disabled, nothing
would link against that library and building the tests would fail.
Any time FFmpeg was used to get a picture Blender would crash
when FFmpeg 4.3 is used. This affects thumbnails, VSE, Clip Editor.
Caused by a bug in FFmpeg which lead to crashes when unaligned
buffer was passed to sws_scale(). It got fixed later on in FFmpeg,
but for portability and compatibility reasons still nice to avoid
crash, especially since it's not so difficult to do.
FFmpeg ticked number is #8747
The FFmpeg Git hash with the fix: ba3e771a42c2
Differential Revision: https://developer.blender.org/D8355
Previous ones were extremely confusing and innacurate (probably
inherited from older versions of scene collections?).
Also, use named fields in struct initialization, much much safer and
cleaner than anonymous, positionned-based thing.
Added support for transforming only origins with greasepencil objects.
The new functions is based on BKE_gpencil_transform. That is why there is FIXME statements in there.
Reviewed By: Campbell, Antonio
Differential Revision: http://developer.blender.org/D8303
Internally UV selection considered close UV's to be connected.
While this could be convenient in some cases,
it complicates logic for more advanced selection operations that
need to check when UV's should be considered part of the same vertex
since simple threshold checks would give different results depending
on the order of UV's tested.
Users must now run "Merge by Distance" instead of relying
on this selection threshold.
There was a weird looking gap between the checkbox and the "Motion Tracking"
label. Plus, the label could not be clicked to change the value, unlike
usually.
Issue is that the row is actually a sub-panel header. The checkbox being drawn
with the draw_header() callback, and the label being added as separate item by
the popover panel code. This adds a hack so the checkbox can add the panel
label itself (the popup drawing skips adding the label then). That addresses
mentioned issues.
The sky will appear brighter than before by default. To compensate for this,
lower exposure in the Film panel. The default altitude was also changed from
90 to 15 degrees.
Patch contributed by Marco with the help of Ryan Jones.
Differential Revision: https://developer.blender.org/D8285
When bl_use_gpu_context is set, an OpenGL context will be available for
OpenGL based render engines.
Differential Revision: https://developer.blender.org/D8305
This patch changes the discovery of pre-compiled kernels, to look for any PTX, even if
it does not match the current architecture version exactly. It works because the driver can
JIT-compile PTX generated for architectures less than or equal to the current one.
This e.g. makes it possible to render on a new GPU architecture even if no pre-compiled
binary kernel was distributed for it as part of the Blender installation.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8332
Trying to get shape key pointer after having unlinked its owner from
Main data-base is rather useless... So those shapekeys ended up never
being deleted.
This refactor is in response to reports in which the adaptive domain with noise caused a crash (e.g. T79009). It should also fix issues where the smoke appeared to be cut off when using the adaptive domain together with noise. It is also possible that some of these changes improve the lines issue from T74559.
This was caused by `BPy_*_ALLOW_THREADS` being used when it shouldn't.
Implemented the simple fix suggested by @brecht :
> The simplest solution may be to ensure that Python stuff is only done
> when called through the RNA API, and not when Eevee calls it directly.
That project cannot be opened correctly ayway, it has recursive
collections intanciating themselves...
But at least now we have a check at startup to detect and 'fix' those
nasty cycles in collections.
Those are useful when you have to create containers with static
storage duration. If those would use Blender's guarded allocator,
it would report memory leaks, that are not actually leaks.
Analyzing the cuts, the points shown in the viewport (indicating the
previous and current cuts) do not correspond to the final cuts.
Sometimes a point, even snapped to a vert, is a point that cuts an edge and
sometimes a point, even snapped to an edge, is a point that cuts only the face.
This is because the detection of snapping vertices from mouse is different
from the "snap" that detects vertices that are cut.
So small projection inaccuracies can result in detection failures.
The solution for this is simply to confirm the cuts whose vertices
indicate the `prev` ou and `cur` point.
The tolerance distance does not need to be calculated in these cases.
This updates the usage of integer types in code I wrote according to our new style guides.
Major changes:
* Use signed instead of unsigned integers in many places.
* C++ containers in blenlib use `int64_t` for size and indices now (instead of `uint`).
* Hash values for C++ containers are 64 bit wide now (instead of 32 bit).
I do hope that I broke no builds, but it is quite likely that some compiler reports
slightly different errors. Please let me know when there are any errors. If the fix
is small, feel free to commit it yourself.
I compiled successfully on linux with gcc and on windows.
Custom driver functions need access to the dependency graph that is
triggering the evaluation of the driver. This patch passes the
dependency graph pointer through all the animation-related calls.
Instead of passing the evaluation time to functions, the code now passes
an `AnimationEvalContext` pointer:
```
typedef struct AnimationEvalContext {
struct Depsgraph *const depsgraph;
const float eval_time;
} AnimationEvalContext;
```
These structs are read-only, meaning that the code cannot change the
evaluation time. Note that the `depsgraph` pointer itself is const, but
it points to a non-const depsgraph.
FCurves and Drivers can be evaluated at a different time than the
current scene time, for example when evaluating NLA strips. This means
that, even though the current time is stored in the dependency graph, we
need an explicit evaluation time.
There are two functions that allow creation of `AnimationEvalContext`
objects:
- `BKE_animsys_eval_context_construct(Depsgraph *depsgraph, float
eval_time)`, which creates a new context object from scratch, and
- `BKE_animsys_eval_context_construct_at(AnimationEvalContext
*anim_eval_context, float eval_time)`, which can be used to create a
`AnimationEvalContext` with the same depsgraph, but at a different
time. This makes it possible to later add fields without changing any
of the code that just want to change the eval time.
This also provides a fix for T75553, although it does require a change
to the custom driver function. The driver should call
`custom_function(depsgraph)`, and the function should use that depsgraph
instead of information from `bpy.context`.
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D8047
c08d847488 incremented the patch version instead of the file subversion
for versioning code when adding new options. This commit resets the patch
version and instead bumps the file subversion.
Status Bar can show scene statistics, memory usage, version, etc set by context menu. Part two of T75672.
Differential Revision: https://developer.blender.org/D7557
Reviewed by Julian Eisel
Support setting vert/edge/face selection, using the sticky option
without performing a second loop over all faces to flush selection.
Existing selection code didn't take advantage of BMesh connectivity
since the logic is from before BMesh was included.
Ogl default is 4 but for almost all cases, blender use tightly
packed format. This avoid confusion and state change for the
common case.
The only case that __might__ need alignement is DDS loader
(untested) so leaving this as it is.
The panel looks out of place with the rest of Blender's UI and the
text is cropped. With property split turned on and a few smaller
tweaks these issues are fixed.
| Before | After |
|{F8700181}|{F8700183}|
Differential Revision: https://developer.blender.org/D8322
When the playhead drawing moved to an overlay, a check was added to keep
it from drawing with a locked interface. This is necessary for some overlays,
but not this one, so this removes the check, making it the responsibility of
the editor.
A context function is added to make that check easier in the future.
Differential Revision: https://developer.blender.org/D8313
Adjusted the fluid build system so that plugins that depend on numpy can be compiled as well.
Note that in this commit numpy support is still disabled. It can be enabled by re-running the Mantaflow update script with USE_NUMPY=1 and enabling WITH_MANTA_NUMPY in extern/mantaflow/CMakeLists.txt. This will happen in a future commit.
No longer including unused dependencies. Should numpy IO be needed at some point, the Manta source update script can be configured so that the required dependencies are included again.
Instead of depending on static initialization order of globals use
static variables within functions. Those are initialized on first use.
This is every so slighly less efficient, but avoids a full class of problems.
I removed bf_blenkernel from `nodes/CMakeLists.txt` again (added it yesterday),
because now this was causing me unresolved symbol errors... Without it, cmake
seems to link the libraries bf_simulation, bf_blenkernel and bf_nodes in the right
order. Not sure if that is just luck or if it is guaranteed.
It was possible to fix the issue by using cmakes `LINK_INTERFACE_MULTIPLICITY`,
but that is probably bad style.
When using link duplicated objects it could happen that one object is
calculating the GPUBuffers and the second object is marking these
buffers invalid. This introduces threading issues.
This patch fixes this by combining the surface and surface per material
batches. Most likely the surface per material batches are used and when
requested you will most likely need the surface batch for the depth
tests and overlays.
During tests it slightly improves performance as batches aren't thrown
away without using it.
After this patch we can add a quick path for meshes with one material
and two materials.
Alternative approaches that have been checked:
- sync extraction per object: reduced performance to much (-15%)
({D8292})
- post checks: reduced the threading issues, but didn't solve it.
- separating preparation and execution of the extraction ({D8312})
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D8329
This also introduces the `blender::nodes` namespace. Eventually,
we want to move most/all of the node implementation files into
this namespace.
The reason for this file-move is that the code fits much better
into the `nodes` directory than in the `blenkernel` directory.
Only the delete shortcut applies here, although the move up and down
operators can optionally be assigned in the keymap.
See rB1fa40c9f8a81 for more details and rB5d2005cbb54b for the
grease pencil modifier panel implementation, which is the same.
Some refactoring of the constraint delete operator was necessary,
including adding an invoke function.
Differential Revision: https://developer.blender.org/D8238
I got undefined reference errors on the `NodeMFNetworkBuilder::get_default_fn`
function under some circumstances. This symbol is definitely defined in bf_blenkernel.
The error seemed a bit undeterministic and was probably caused by some incorrect
link order. I don't get the error with this change.
CMake, when it's configuring the project, runs the `blender_test` test
runner (if it exists from a previous build) to discover which tests it
contains. At this time none of the tests themselves are run, so it's not
that useful to run ASAN and have it break things when there are memory
leaks.
This commit disables ASAN by injecting `ASAN_OPTIONS="detect_leaks=0"` in
the environment variables.
It is not enough to use `set(ENV{ASAN_OPTIONS} "detect_leaks=0")` in
`tests/gtests/runner/CMakeLists.txt`, as it wouldn't be passed to the child
process.
This commit is a followup of {D7649}, and ports the USD tests to the new
testing approach. It moves test code from `tests/gtests/usd` into
`source/blender/io/common` and `source/blender/io/usd`, and adjusts the
use of namespaces to be consistent with the other tests.
I decided to put one test into `io/usd/tests`, instead of
`io/usd/intern`. The reason is that this test does not correspond with a
single file in that directory; instead, it tests Blender's integration
with the USD library itself.
There are two new CLI arguments for the Big Test Runner:
- `--test-assets-dir`, which points to the `lib/tests` directory in the
SVN repository. This allows unit tests to find test assets.
- `--test-release-dir`, which points to `bin/{BLENDER_VERSION}` in the
build directory. At the moment this is only used by the USD test.
The CLI arguments are automatically passed to the Big Test Runner when
using `ctest`. When manually running the tests, the arguments are only
required when there is a test run that needs them.
For more info about splitting some code into 'common', see
rB084c5d6c7e2cf8.
No functional changes to the tests themselves, only to the way they are
built & run.
Differential Revision: https://developer.blender.org/D8314
Reviewed by: brecht, mont29
Not sure if these conversions are a good idea. However, we have them
in Cycles, so they be available in the simulation node tree for consistency
reasons.
For still images, always return 0 for the current frame number. This ensures
Cycles can detects that the image did not change.
Based on patch by Vincent Blankfield.
Differential Revision: https://developer.blender.org/D8242
Function names will be updated in a separate commit.
This will be the place for the new particle system and other
code related to the Simulation data block. We don't want
to have all that code in blenkernel.
Approved by brecht.
This commit introduces a new way to build unit tests. It is now possible
for each module to generate its own test library. The tests in these
libraries are then bundled into a single executable.
The test executable can be run with `ctest`. Even though the tests
reside in a single executable, they are still exposed as individual
tests to `ctest`, and thus can be selected via its `-R` argument.
Not yet ported tests still build & run as before.
The following rules apply:
- Test code should reside in the same directory as the code under test.
- Tests that target functionality in `somefile.{c,cc}` should reside in
`somefile_test.cc`.
- The namespace for tests is the `tests` sub-namespace of the code under
test. For example, tests for `blender::bke` should be in
`blender::bke:tests`.
- The test files should be listed in the module's `CMakeLists.txt` in a
`blender_add_test_lib()` call. See the `blenkernel` module for an
example.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7649
Having a sound strip in the VSE caused a missing relation error to be
logged on the console. This was caused by the AUDIO depsgraph component
not having an entry node. This commits adds that node, and sets up
relations correctly.
Differential Revision: https://developer.blender.org/D8290
Reviewed By: Sergey
Enabling all `make deps` dependencies with the exception of Embree and OIDN.
After that, Blender can be compiled on an Apple Silicon Mac just like on any
Intel based Mac. There are still compiler warnings that need to be
investigated and there are probably a couple of bug still to be discovered
and to be fixed.
Most patches to the dependencies are simple and are about disabling SSE and
setting the proper architecture to compiile for. Notable exception is Python,
where I back ported a yet to be accepted PR for upstream Python:
https://github.com/python/cpython/pull/21249
Cross compiling or buliding a Universal Binary is not supported yet.
The minimum macOS target version for x86_64 remains at 10.13, the target
for arm64 is 11.00.
Differential Revision: https://developer.blender.org/D8236
Key-map display was doing thousands of redundant alignment operations.
Set the spacing instead as align was only set to use zero spacing.
This would have prevented the crash reported by T78636.
Displaying user preferences search crashed on macOS when the search
contained a common character such as 'E'.
This caused alignment to 'alloca' too much memory.
Replace with a heap allocation fallback.
This happened because of typo in seq_dupli() when duplicating effect data.
Instead of duplicating data to new sequence, it was duplicated into original.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8295
Also includes outline overlays. Removes the temp overlay drawing
We make the geometry follow camera like billboards this uses less
geometry. Currently we use half octahedron for now. Goal would be
to use icospheres.
This patch also optimize the case when pointcloud has uniform radius.
However we should premultiply the radius prop by the default radius
beforehand to avoid a multiplication on CPU.
Using geometry instead of pseudo raytraced spheres is more scalable as
we can render as low as 1 or 2 triangle to a full half sphere and can
integrate easily in the render pipeline using a low amount of code.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8301
The vertex colors node was using the M_COL attribute type but Sculpt
Vertex Colors use CD_PROP_COLOR
Now the Vertex Color node also fallbacks to legacy vertex colors if
Scultp Vertex Colors are not enabled as experimental.
Reviewed By: brecht
Maniphest Tasks: T78369
Differential Revision: https://developer.blender.org/D8185
When the mesh is linked, the materials can not be available or be the same assigned to mesh. Now, if the mesh is linked, a simple two materials conversion is used.
To get the full list of materials, the mesh must not be linked.
Also checked some indexes to be sure never get a wrong value and that materials are not created again and again.
`CD_LOCATION` was only used temporarily due to the lack
of a better alternative. This also removes the name from
`CD_LOCATION` again, because at most one layer of this
type should exist.
This issue was produced by a hack in the sculpt mode code from 2.80
when the sculpt API for connectivity info was not available.
The smooth brush was the only brush that needed connectivity info,
so there were 3 different smooth functions with the connectivity
queries implemented for dyntopo, meshes and grids. The mesh version
of smoothing was checking the number of connected faces to a vertex
to mask the mesh boundaries, which was not covering all cases and
was hardcoded in the smooth function itself.
This patch removes all those legacy functions and unifies all
smooth functions into a single one using the new API and the
automasking system. In order to achieve this, there were needed
some extra changes:
- The smooth brush now does not automasks the boundaries by default,
so its default preset needs to be updated to enable automasking
- The mesh boundary info is extracted once and cached in a
bitmap, similar to the disconnected elements IDs. This makes
boundary detection work as expected in all cases, solving a lot
of known issues with the smooth brush. In multires, this info is
extracted and cached only at the base mesh level, so it is much
more memory efficient than the previous automasking system.
- In order to keep the brushes responsive as they were before,
the automasking system can now skip creating the cache when it
is not needed for the requested options. This means that for
high poly meshes and simple automasking options the brushes
won't lag on start.
Reviewed By: sergey
Maniphest Tasks: T78747
Differential Revision: https://developer.blender.org/D8260
The flood fill operation was setting the mask using to_v, so in the first
iteration when the floodfill callback was using the active vertex as
from_v and any other neighbor as to_v, the mask for the active vertex
was never set.
Now the mask is set using from_v and it checks if it should continue
propagating to the next neighbor using to_v.
Reviewed By: sergey
Maniphest Tasks: T77417
Differential Revision: https://developer.blender.org/D8294
Those checks have been added to clang tidy within the last year.
They fail when I use a clang tidy version I built from source.
Reviewers: sergey
Differential Revision: https://developer.blender.org/D8302
This reverts commit 98b1a716d6.
That commit broke a few modifiers.py tests
(Screw+Weld and a weld merge threshold).
And some pairs may be lost in the first loop.
Now it calculates the actual distance when traveling along the curve.
I addition to this, it also now supports cyclic curves.
Reviewed By: Campbell
Differential Revision: http://developer.blender.org/D8293
Removed the 'select main object to override' menu when overriding an
instanced collection, this was no more used anyway.
Added new behavior allowing to select which directly linked collection
to override when trying to override an inderctly linked object. This
allows to link collections without instancing them with an empty object,
select one of their objects, and call override operator.
This reverts commit 03c8b048a1.
This commit re-introduced T76837.
While there is a comment explaining why this function is needed,
the naming of the poll function does make this confusing.
The API could be changed to avoid confusion here.
The original code to rearrange the weld vertices map was confusing.
It traverses the overlap result multiple times within a loop.
This part of the code has therefore been rethought, simplified and commented.
This also results in a slight improvement in the performance of the modifier.
When the view isn't updated the renderpass thought that it was rendering
the next sample, skipping the conversion from encoded to blender
normals.
This patch resets the current sample when only rendering single sample
layers.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D8280
Sculpt vertex colors changed the `DRW_MeshCDMask` from 4 bytes to 8 bytes, but
the functions assumed it still was 4 bytes. This patch updates the functions and
adds a compile time check.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D8215
This fixes the double prop edit checkbox in the redo menu.
This also makes it so that proportional edit in connected mode now
matches how it behaves in mesh edit mode.
Without this change, ripping in UV edit mode with proportional edit on
would be useless as the UV verts you ripped will still be stuck together
even if they were not connected anymore.
Reviewed By: Campbell
Differential Revision: http://developer.blender.org/D8289
These flags need to be set correctly in order to distinguish between data that comes from cache files and raw data that comes directly from pointers to the data in Mantaflow.
The move constructor of `mpq_class` from GMP currently
allocates when it is moved. So, it cannot be noexcept.
Since we want to use this type, this static assert cannot
stay there.
This was disabled during 2.8x for smooth porting of 2.7x scripts,
Now '@' is used for matrix multiplication,
support '*' to multiple vector elements.
See T56276.
Internally the "show_expanded" property stores the expansion for every
subpanel, but for RNA we should only check the first bit of the flag that
corresponds to the main panel.
The smear brush was using the stroke direction to slide colors across
the mesh surface (this is called drag in other sculpt tools). Similarly,
other deformations can be included. The most common ones in image
editing are pinch and expand, which can be used to sharpen transitions
between colors.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8270
Enables the color palette subpanel for brushes that have color
capabilities (only the paint brush for now)
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8268
shobjidl_core.h only exists in the windows 10 SDK in the 8.1
SDK ShObjIdl.h will have the definitions we need, which still
exists in the 10 SDK and implicitly includes shobjidl_core.h.
so ShObjIdl.h will work on both SDK versions.
Careless use of acos() in spherical coordinates transformation was
deteriorating the precision near zenith (and nadir) and producing
glitchy pixels (best seen in longer focal lengths).
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D8266
Simply remove that check ob userdef's themes, we are never read any
userdef from startup file anymore, so this check makes no more sense.
To be backported to 2.83.
This commit adds a new read-only boolean property `Screen.is_scrubbing`.
The related property `Screen.is_animation_playing` is set to `True` in
two situations:
- Animation is actually playing (for example via the Play button in the
timeline)
- The user is scrubbing through time (in the timeline, dopesheet, graph
editor, etc.)
To distinguish between these two cases, the property
`Screen.is_scrubbing` has been added.
Concept approved by @brecht.
It was already possible to create Sound and Image strips that reference
non-existing files. Now it's also possible to create Movie strips
referencing missing files via the Python API call
`Sequences.new_movie()`. In this case, the duration of the strip will be
set to 1 frame.
Note that this commit does not change anything in the user interface.
The Python API of the `MovieStrip` class is extended with a function
`reload_if_needed()`. This function only performs disk I/O if the movie
strip cannot produce frames, that is either when its filepath points to
a non-existing file, or when the video sequence editor has not been
shown yet (for example because it is in an inactive workspace).
This allows for the following:
```
import bpy
scene = bpy.context.scene
vse = scene.sequence_editor_create()
filepath = bpy.path.abspath('//demo.mkv')
strip = vse.sequences.new_movie("movie", filepath,
channel=2,
frame_start=47,
file_must_exist=False)
strip.frame_final_end = 327
```
This will create a new movie strip, even when `demo.mkv` does not exist.
Once `demo.mkv` has appeared at the expected location, either
`strip.reload_if_needed()` or `strip.filepath = strip.filepath` will
load it.
Differential Revision: https://developer.blender.org/D8257
Reviewed By: Sergey, ISS
This function is more expansive than the simpler `rna_ensure_property()`
one, and should only be used when IDProperty data is actually needed.
If one only needs to ensure it has a valid PropertyRNA pointer,
`rna_ensure_property()` is much more efficient.
Also add compiler warnings when results of those functions are unused,
this should never be the case.
When using the sun, we need to sun sampling logic to avoid excessive
sampling map resolution, but that logic assumes that the Vector input
comes from the view direction.
That is the case in the vast majority of cases anyways, so the easiest
solution is to just remove the input for that case.
Differential Revision: https://developer.blender.org/D8091
For animation/driver purposes, being able to go outside of the 0-360
range makes things easier.
Differential Revision: https://developer.blender.org/D8091
The force node can now be used to control the behavior of particles.
Forces can access particles attributes. Currently, there are three attributes:
`Position` (vector), `Velocity` (vector) and `ID` (integer).
Supported nodes are: Math, Vector Math, Separate Vector, Combine Vector and Value.
Next, I'll have to split `simulation.cc` into multiple files and move
some stuff out of blenkernel into another folder.
Instead of using the mouse cursor position,
this selects between existing selected elements.
Access this since picking a selection path doesn't
work from the menu.
This is no longer used by default, when '--python-use-system-env' is set
there are many Python environment variables, don't list them in
Blender's help message.
- Remove the "mapping" subpanel and moves the source axis
selection ot the destination subpanel.
- Rename "Source" and "Destination" to "Map From" and "Map To" to
make the action more clear
- Gray out source axes when their data isn't selected.
These changes were discussed in D8041.
Performance is not great currently due to the API not seeming to support
efficient denoising of multiple tiles at the same time. So in many cases
only one or a few threads will actually be denoising at the same time.
In renders with many samples this is not a big problem, but for faster
renders it's a signficant overhead.
We should try to optimize this still, possibly by batching denoising of
a bigger neighborhood of multiple tiles at once.
Make sure that proxy and original images are scaled to same size before
applying offset or crop.
During testing, I discovered, that raw cache will lose information whether
this image was proxy or not. Because of this, proxy images will not create
this cache type. It would be fairly easy to implement this functionality for
cache, but I have decided to not do it now, because I did not want to pass yet
another mostly hard-coded bool flag to cache system. Since image is proxy, it
should be fast to read anyway.
In case of using offset property, code was modified to make sure we scale
image only once. I also tried to make code more readable and streamlined and
cleaned up surrounding functions a bit.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8203
This adds `blender::RandomNumberGenerator` in `BLI_rand.hh`.
Furthermore, `RNG` is now implemented in terms of this new generator.
No functional changes are expected, the generated random numbers
are not changed by this commit.
Reviewers: campbellbarton, brecht
Differential Revision: https://developer.blender.org/D8259
Time will tell whether we need to expose more RNA override flags here.
Implements/Fix T78534.
Differential Revision: https://developer.blender.org/D8250
The triplet static RNA / runtime RNA / custom properties is a real pain to
deal with...
Using the new `PropertyRNAOrID` struct helps clarifying and properly
dealing with all three cases.
Note that this makes override of py-defined RNA properties working
(support for that will be committed next).
Differential Revision: https://developer.blender.org/D8249
Introduce new PropertyRNAOrID structure, storing most useful data about
an 'opaque' PropertyRNA in relation with a given PointerRNA struct.
It deals with all the three cases (pure static RNA, runtime RNA where
data is actually stored in IDProperties, and pure IDProperties, aka
custom data.
Use binary search for querying deform weights.
Spring 02_020_A.anim.blend on Ryzen 1700X goes from 12.4 to 12.7fps.
During profiling it was detected that adding new items to the head was faster than adding to the tail.
Reviewed By: Campbell Barton
Differential Revision: https://developer.blender.org/D8127
This changes the behavior of rip when entire faces are selected.
Now face regions are isolated and moved instead of ripping the edge-loop
extracted from the selection boundary.
This is a convenient alternative to separate selection & move.
Resolves T78751.
Loop over faces and calculate their centers instead of zeroing the
face center array and accumulating all faces vertex corners.
Move subsurf face center extraction into it's own loop since it works
differently.
This disables all Sculpt Vertex Colors tools, operators, panels and rendering capabilities and puts them under the "Use Sculpt Vertex Colors" experimental option.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8239
As Face Sets IDs start from 0 and increase by 1 each time a new face set
is created in a mesh, when joining multiple meshes it could happen that
the same ID is used by several unrelated areas in multiple objects. This
checks the Face Sets IDs when joining meshes and ensures that they are
not repeated between different objects when joining them, so in the
resulting mesh all previous face sets will have different IDs.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8224
Note that this behavior is enforced on user level for now, but on code
side it is controlled with a flag, which should make it easy to refine
that behavior if needed.
Only exception is when we duplicate a linked ID directly (then we assume
user wants a local deep-copy of that linked data, and we always also
duplicate linked sub-data-blocks).
Note that this commit also slightly refactor the handling of actions of
animdata, by simplifying `BKE_animdata_copy_id_action()` and adding an
explicit new `BKE_animdata_duplicate_id_action()` to be used during ID
duplication (deep copy).
This also allows us to get rid of the special case for liboverrides.
As tools iterators skip not visible vertices, fully hidden nodes can
also be skipped and considered as masked.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8244
This function was using the wrong flag to update the visibility state of
the nodes, so I assume that most of the partially visible optimizations
were not working.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8243
This implements the SCULPT_vertex_is_boundary and SCULPT_vertex_has_unique_face_set functions for PBVH_GRIDS, which makes features such as automasking now work in multires. It also fixes some other face sets related features in multires, like face set boundary smoothing.
This uses the BKE_subdiv_ccg_coarse_mesh_adjacency_info_get function to get the vertex indicies in the base mesh from multires. This way the API functions can get topology or face set information directly from it. In the future, these vertex indices can be used to get any other information from the base mesh from multires, like seams, sharp edges, disconnected elements IDs...
Reviewed By: sergey
Maniphest Tasks: T78664
Differential Revision: https://developer.blender.org/D8227
It is not practical to change the alpha of the paint color with the
color picker as with the current brush design alpha is the main strength
control for the brush.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8208
There were two issues.
First is related on ISPC's CMake configuration forcing C and C++
compilers to be clang and clang++. This goes against of desired
behavior when we use our own compiled clang compilers.
The second issue was related on linker failure: CLang libraries
are linked statically, and they need some of C++ 11 STL symbols
which are coming from libstdc++.
Differential Revision: https://developer.blender.org/D8258
I'm not sure if the Sky was deliberately left out or was just waiting for a
better moment, but so many I was disappointed that Sky in EEVEE is
completely white.
There are already 2 implementations (osl and gpu) so this is the third one.
Looking at other cases it seems that we are not supposed to share sources
between cycles and the rest? So the new util_sky_model files are just
copies of what is already in cycles, except that the data file uses the RGB
variant of the Hosek/Wilkie model, because we output RGB anyway (but can be
easily changed to XYZ if desired - the results are nearly identical).
I am not sure if it is okay to pass 3*9 float values as 3 mat4 uniforms (I
wanted to use mat3 but it does not work).
Also, should I cache the sky model data between renders if the parameters
do not change?
Reviewed By: fclem, brecht
Differential Revision: https://developer.blender.org/D7108
Every Particle Simulation node has a name (or a path when it is in a node group).
This name has to be used in the Simulation modifier on a point cloud to see
the particles.
Caching has been disabled for now, because it was holding back development
a bit. To reset the simulation, go back to frame 1.
Currently, there is no way to influence the simulation. There are just some
randomly moving points. Changing that is the next step.
Duplication and deletion code of modifiers was totally wrong for
particle system, that special weird thing needs its own custom
management.
Note that for now I chose not to duplicate the particle settings ID when
duplicating the modifier...
This adds support for path selection for vertex edge & face selection
modes, matching mesh editing behavior, useful with the UV rip tool.
Region select & edge tagging are currently not supported,
although they could be added eventually.
This uses the new implicit conversions and constructors
that have been committed in the previous commit.
I tested these changes on Linux with gcc and on Windows.
This allows us to avoid many calls to `as_span()` methods. I will
remove those in the next commit. Furthermore, constructors
of Vector and Array can convert from one type to another now.
I tested these changes on Linux with gcc and on Windows.
The ff_cfhd_init_vlcs() function was using a lot of stack space, which
made linker on macOS unhappy. Using heap allocation allows to silence
the warning without causing other side-effects.
Kept the patch enabled for all platforms to avoid difference in behavior
and performance on different platforms, which could make certain types
of investigation very tricky.
Differential Revision: https://developer.blender.org/D8248
This was the last of the three network optimizations I developed in
the functions branch. Common subnetwork elimination and constant
folding together can get rid of most unnecessary nodes.
This can be used to find separate islands in meshes efficiently (as is
done in cycles already). Furthermore, this helps to implement some
algorithms on node trees more efficiently.
C++17 does not work on 10.12, and Apple extended support ended for 10.12 in
October 2019.
Maniphest Tasks: T76783, T76184
Differential Revision: https://developer.blender.org/D8179
The spelling and capitalization of package name passed to find_package()
and find_package_handle_standard_args() needs to match.
Silences CMake warning about mismatch.
Differential Revision: https://developer.blender.org/D8247
Those optimizations work on the multi-function network level.
Not only will they make the network evaluation faster, but they also
simplify the network a lot. That makes it easier to understand the
exported dot graph.
This can be useful to save the result of a cloth simulation as a
shape key without destroying the simulation, so it's possible to
e.g. re-run it to get other shapes, or simply use the new shape
key to start the simulation already in a draped state.
It also makes sense to allow applying as shape key even when the
mesh is shared, because the operation itself just adds a shape
key. To support this, split the apply operator into Apply and
Apply As Shapekey so that they can have different poll callbacks.
Differential Revision: https://developer.blender.org/D8173
The problem here was numerical precision: The code calculates the angle between
sun and view direction, and the usual acos(dot(a, b)) approach for that has
poor numerical performance for almost parallel angles.
As a result, the generally tiny difference between floating point computation
between CPU and GPU was enough to make the sun vanish at different radii,
causing different results.
The new version fixes the difference by making the computation much more robust
on both platforms.
This adds new callbacks to `bNodeSocketType` and `bNodeType`.
Those are used to generate a multi-function network from a node
tree. Later, this network is evaluated on e.g. particle data.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D8169
The MSVC atomic function is defined for an unsigned type.
Not sure why this became an issue after switch to TBB by default,
maybe some CFLAGS changed to be more strict after that.
The upstream version of nasm does not put version information to the
generated object files, which makes linker to show the following
warning:
building for macOS, but linking in object file
Using own patched version of nasm which puts required information to
the object file, making linker happy.
The plan is to either streamline the patch and provide it to the
upstream, or, it that takes too long, get an independent fix from the
upstream.
Issue is reported on Linux ith Intel HD6xx iGPU. Inside
`gpu_select_sample_query.c` the call to `glGetQueryObjectuiv` froze. After
bisecting this lead to the polyline shader. When using a 3d color shader
in stead of the polyline shader during selection seems to fix the issue.
Other parts of blender might also be effective, but I wasn't able to
freeze blender in these areas. When it does, we might want to add
a similar work-around to button2d, cage2d, cage3d & move3d, navigate.
Backport this patch to 2.83.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D8217
The knife code currently calls the `BLI_bvhtree_overlap` function that
tests the overlap between the mesh tree and an AABB that encompasses the
points projected in the clip_start, clip_end and or clip_planes of the
view.
This resulted in many false positives since the AABB is very large.
Often all the triangles "overlapped".
The solution was to create a new function that actually tests the
intersection of AABB with a plane.
Even not considering the clip_planes of the view, this solution is more
appropriate than using overlap.
Differential Revision: https://developer.blender.org/D8229
This was due to a bad driver which was not respecting this bit of the
specification:
`If the current primitive does not originate from an instanced draw command, the value of gl_InstanceID is zero.`
This patch adds support for the curve primitive from OptiX to Cycles. It's currently hidden
behind a debug option, since there can be some slight rendering differences still (because no
backface culling is performed and something seems off with endcaps). The curve primitive
was added with the OptiX 7.1 SDK and requires a r450 driver or newer, so this also updates
the codebase to be able to build with the new SDK.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8223
Don't apply the matrix transform optimization in this case, curve points and
radius can't represent non-uniform scale the way is possible with triangle
meshes and vertices.
This would cause abrupt change if objects had e.g. motion blur in one frame
and not in the next.
Each duplicated (a.k.a. instanced) object has a Persistent ID, which
identifies a dupli within the context of its duplicator. This ID
consists of several numbers when there are nested duplis (for example a
mesh instancing empties on its vertices, where each empty instances a
collection). When exporting to Alembic/USD, these are used to uniquely
name the duplicated objects in the export.
This commit reverses the order of the persistent ID numbers, so that the
first number identifies the first level of recursion. This produces
trees like this:
ABC
`--Triangle
|--Triangle
|--Empty-1
| `--Pole-1-0
| |--Pole
| `--Block-1-1
| `--Block
|--Empty
| `--Pole-0
| |--Pole
| `--Block-1
| `--Block
|--Empty-2
| `--Pole-2-0
| |--Pole
| `--Block-2-1
| `--Block
`--Empty-0
`--Pole-0-0
|--Pole
`--Block-0-1
`--Block
It is now clearer that `Pole-2-0` and `Block-2-1` are instanced by
`Empty-2`. Before this commit, they would have been named `Pole-0-2` and
`Block-1-2`.
Exporting a scene to USD or Alembic would fail when there are multiple
duplicates of parent & child objects, duplicated by the same object. For
example, this happens when such a hierarchy of objects is contained in a
collection, and that collection is instanced multiple times by mesh
vertices. The problem here is that the 'parent' pointer of each
duplicated object points to the real parent; Blender would not figure
out properly which duplicated parent should be used.
This is now resolved by keeping track of the persistent ID of each
duplicated instance, which makes it possible to reconstruct the
parent-child relations of duplicated objects. This does use up some
memory for each dupli, so it could be heavy to export a Spring scene
(with all the pebbles and leaves), but it's only a small addition on top
of the USD/Alembic writer objects that have to be created anyway. At
least with this patch, they're created correctly.
Code-wise, the following changes are made:
- The export graph (that maps export parent to its export children) used
to have as its key (Object, Duplicator). This is insufficient to
correctly distinguish between multiple duplis of the same object by
the same duplicator, so this is now extended to (Object, Duplicator,
Persistent ID). To make this possible, new classes `ObjectIdentifier`
and `PersistentID` are introduced.
- Finding the parent of a duplicated object is done via its persistent
ID. In Python notation, the code first tries to find the parent
instance where `child_persistent_id[1:] == parent_persistent_id[1:]`.
If that fails, the dupli with persistent ID `child_persistent_id[1:]`
is used as parent.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8233
We don't need it and it was optionally enabled, causing Blender to fail
to link on certain configuration (when Brotli is installed via Homebrew
for example).
This is just a change in `AbstractHierarchyIterator::debug_print_export_graph()`
to aid in debugging. It'll make it possible to distinguish between
different duplicates of the same object.
No functional changes to Blender itself.
The unit being "pixels".
Before this change the solve errors were unitless in the UI.
With this change in place, the UI is now clear on that the unit of the
reprojection errors is pixels (px).
Differential Revision: https://developer.blender.org/D8000
The configuration was confused about gettext installed via Homebrew
and isysroot passed to Python's compilation but not to test programs.
After this change `import gettext` still works, but it is unclear how
to test it further,
Differential Revision: https://developer.blender.org/D8231
Searching in these files for "_as" will reveal a comment at the
top, that explains what these methods are for. There is no need
to duplicate that knowledge all over the place.
Set of fixes which had to be made in order to have dependencies built
on own laptop:
- Require bison as a dependent software. It is required by ISPC.
On macOS it is required to be installed via Homebrew. This is because
Bison from Xcode toolchain is too old.
- Made sure Boost is compiled using clang.
Without this gcc was used, and some unsupported command line argument
was passed to it.
- Modify OGG in a way which does in fact pull fixed sized types.
They are defined in stdint.h.
Without this fix FFmpeg will not detect presence of OGG because the
test program fails to compile.
- Force disable zstd compression and make wepb optional for the TIFF
library. Without this TIFF might pick up development libraries from
Homebrew.
Differential Revision: https://developer.blender.org/D8221
Only the delete shortcut applies here, although the move up and down
operators can optionally be assigned in the keymap.
See rB1fa40c9f8a81 for more details and rB5d2005cbb54b for the
grease pencil modifier panel implementation, which is the same.
Also remove the code in the ghash that is no longer used.
This change simplifies the existing code.
Differential Revision: https://developer.blender.org/D8219
This adds a notification type for shaderfx so the properties editor can
be properly notified to redraw.
Another possible solution would be to also redraw the shaderfx tab
with a ND_MODIFIER update, but this solution allows us to avoid
some unecessary redraws too. There were no existing cases of
ND_OBJECT | NC_MODIFIER updates, so those cases were
removed from buttons_area_listener.
Differential Revision: https://developer.blender.org/D8159
Denoising devices do not need to load the full feature set of kernels, so only activate the denoising
feature for them (so that it is possible to use features that are supported by the render devices, but
not the denoising devices).
For historical reasons, `DupliObject::persistent_id` was of size
`2*MAX_DUPLI_RECUR`. These reasons are now gone, and the persistent ID
always gets exactly one array element for every dupli-recursion.
Differential Revision: https://developer.blender.org/D8222
Reviewed by: brecht
Caused by recent own refactor of cache presevation handling in readfile,
EEVEE's lightcache are weird birds that can also be saved in .blend
files, need a special handling for those 'persistent' caches...
Both `knife_find_closest_vert` and `knife_find_closest_edge` call
`knife_find_closest_face`. Thus, running the raycast twice and setting
values like `kcd->curr.bmface` and `kcd->curr.is_space` repeatedly.
So:
- separate `knife_find_closest_face` from `knife_find_closest_vert` and `knife_find_closest_edge`.
- rename `knife_find_closest_vert` to `knife_find_closest_vert_of_face`
- rename `knife_find_closest_edge `to `knife_find_closest_edge_of_face`.
- do not set parameters previously set.
Differential Revision: https://developer.blender.org/D8198
Even if we do not use exception in many places in Blender, our core C++ library
should become exception safe. Otherwise, we don't even have the option
to work with exceptions if we decide to do so.
New rip tool matching edit-mesh rip functionality.
Useful as disconnecting UV's, especially for loops is inconvenient
without this.
This uses 'V' to rip, changing stitch to 'Alt-V'.
It has been tested that local shaders workaround isn't needed for the
latest Windows/Intel 6xx GPU's.
Currently the local shaders workaround doesn't work anymore during the
investigation it was detected that the intel drivers didn't need it
anymore.
Local shaders should still be fixed as it is also used for some legacy
iGPU's. The current work around crashes when doing preview renders in
EEVEE as the default materials aren't available but for the work around
they should. (See T77346 for more information)
No functional changes. Convert all C++ style comments to C comments.
Also capitalize and add full stops.
The comments themselves were not cleaned up. Some could be removed or
reworded.
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/blenkernel` module. Not all warnings are
addressed in this commit.
No functional changes.
Instead of manually checking the pinned object, use the existing
ED_object_active_context function. This requires adding const
to the context in that function.
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/editors/transform` module.
No functional changes.
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/editors/space_sequencer` module.
No functional changes.
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/editors/space_clip` module.
No functional changes.
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/editors/space_outliner` module.
No functional changes.
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/editors/space_node` module.
No functional changes.
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/editors/space_text` module.
No functional changes.
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/editors/space_view3d` module.
No functional changes.
Treat those as pure runtime code, reset to NULL by reading code, for
now.
Think those could be handled like Image gputextures (i.e. considered
runtime cache and preserved across undo steps), but probably not
critical for now.
The ocean modifier has two properties that use a [0, 10] hard min and
hard max. The values act as factors though, so it makes more sense to
use sliders and a 0 to 1 range.
This commit also bumps the file subversion to avoid repeatedly applying
the change to the properties' range.
Differential Revision: https://developer.blender.org/D8186
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/editors/sculpt_paint` module.
No functional changes.
The `ed_screen_context()` function is approximately 700 lines long, and
its main structure is a huge chain of `else if` statements. Some of the
bodies did not return, but rather fell through and relied on the `return
-1;` at the bottom of the function. This means that in order to truly
understand what is going on in one of those `else if` blocks, it could
be required to scroll past all the following `else if` blocks,
double-checking that they all had an `else`, and then see what happens
below.
By adding explicit `return -1;` everywhere this happened, this is all
avoided, increasing local understandability of the code. Furthermore, it
makes the upcoming cleanup with the Clang-Tidy rule
`readability-else-after-return` a lot easier to do.
No functional changes.
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/editors/animation` module.
No functional changes.
This function was returning the ik_chain before disabling the
fake_neighbors, so when the brush was used again with fake neighbors
disabled after rebuilding the PBVH and free them, they were still
enabled in the SculptSession, causing a the crash.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8195
Some code delt with panel merging in earlier versions of Blender,
which is no longer needed. Other code delt with controls that aren't
used anymore, and in some cases have region-level equivalents.
There's a surprising amount of this unused code in this file, so removing it
will be helpful for the future.
Differential Revision: https://developer.blender.org/D7938
The issue is duplicated code. There are two functions that zero-fill
the frame number. They worked the same for positive frames numbers, but
behaved differently for negative ones.
On frame `-100`, `BLI_path_frame` outputs `-0100` and
`fluid_cache_get_framenr_formatted_$ID$` outputted `-100`.
I changed the behavior of the latter, because we depend on the behavior
of the former for much longer already.
Reviewers: sebbas
Differential Revision: https://developer.blender.org/D8107
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/editors/interface` module.
No functional changes.
Some notes:
* `Image.cache` acts as some kind of 'main' cache, when it is NULL
(could not be restored), other caches should also be cleared. Oddly
enough, previous code was not clearing **all** caches, could not find
any reason for that behavior, so new code does a full clear.
* `imamap` is still used for Node previews from scenes' compositor,
however this is actually fully disabled in `direct_link_node()`.
* For render slots we cannot use offsetof as third part of the cache
key, so we are using a hash of the slot's name instead.
As far as I can tell, this fixes T76989: Visual glitches when undo after
reload multiple images by script (in Material Preview).
Main goal here is to have better specificity using cache keys, to avoid
same memroy address being re-used messing up with cache pointers
restoration after undo had to re-read a data-block.
Once all caches handling are ported to this new system, it should fix
random issues like the one reported in T76989.
Part of D8183, refactoring how we preserve caches across undo steps in
readfile code.
Changed variable names from mmd, mds, mfs, and mes to fmd, fds, ffs, and fes. The author of this commits lights a candle for all the merge conflicts this will cause.
First benefit is reduced boilerplate code.
Second benefit is fixed warnings about using deprecated spin lock
on macOS when using SDK 10.12 and above.
Differential Revision: https://developer.blender.org/D8182
When building without TBB use native to the platform spin lock
implementation. For Windows it is an atomic-based busy-wait,
for Linux it is pthreads' spin lock.
For macOS it is a mutex lock. The reason behind this is to stop
using atomics library which has been declared deprecated in SDK
version 10.12. So this changes fixes a lot of noisy warnings on
the newer SDK.
Differential Revision: https://developer.blender.org/D8180
The compilation using GCC + Clang-Tidy succeeded for me and Sybren
(with some linker caveats for Sybren) but seems that it is doable
to make GCC + Clang-Tidy to officially work for Blender.
Now it should be possible to enable Clang-Tidy doing something like
make developer debug BUILD_CMAKE_ARGS='-DWITH_CLANG_TIDY=ON'
Clang Tidy is a Clang based "linter" tool which goal is to help
fixing typical programming errors.
It is run as a separate compile step of every file, which slows
compilation down but allows to fully analyze the file the same
way as compiler does and catch non-trivial bugprone cases.
This change includes:
- CMake option called `WITH_CLANG_TIDY` which enables Clang Tidy
linter tool on all source in the `source/` directory.
This option is only available on Linux, as it is currently the
easiest platform to get the Clang Tidy toolchain to work.
- CMake module which is aimed to find latest available Clang Tidy.
- Set of rules which allows to have Blender fully compiled without
extra issues.
The goal of this change is to provide a base ground so that solving
all the warnings can happen later on, as a team effort.
It should be possible to use Clang Tidy side-by-side with both GCC
and Clang, but there seems to be some tweaks to be done in CMake to
make it really work for Blender. For now use Clang toolchain if
there are issues with GCC+Clang Tidy.
It will be worked on in the nearest future to bring seamless
experience for all configurations.
Currently there is no official way of getting Clang Tidy on macOS,
and on Windows there are some difficulties of hooking up Clang Tidy
from LLVM package to the MSVC compiler toolchain.
The actual warnings in the code will be addressed as a part of the
Code Quality Days, task T78535.
Differential Revision: https://developer.blender.org/D7937
There was a discrepancy between the Tooltip of the Camera's Background Image that controls the opacity of the image and the operator's name that reads Alpha. The tooltip says **"Image opacity to blend the image against the background color"**, so it was renamed to Opacity to follow the tooltip.
The decision for this change is that the naming Alpha is not the most appropriated, since it has nothing to do if a loaded image has an embedded Alpha channel or not.
{F8540101}
Reviewed By: #user_interface, pablovazquez
Differential Revision: https://developer.blender.org/D7760
This revision affects the menu under: Clip > Track > Detect Features > Placement.
A bit of UI that was probably missed when the legacy GP was renamed to Annotation
{F8647693}
In this state, it may be confusing for the user.
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D8139
I spotted a duplicate struct declaration, so I had to check for other duplicated as well
There might be some other but i am not confident enough for deleting them
this regex search for duplicate ^(.*;)$\n(\1)$
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D8146
This resolves one of the last few areas where we still use inappropriate
abbreviations. Reading abbreviated words is usually slower, because
users must parse, guess and translate the words. Using abbreviations
such as 'rot' is also especially bad since it's a word in itself too.
The main advantage of abbreviations is that they are faster to *write*,
which just isn't a concern for text in the UI.
Differential Revision: https://developer.blender.org/D8174
This tool generates masks based on the sculpt vertex colors by clicking
on the model, similar to automatic selection tools in image editing
software.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8157
The eigenvectors in the ocean modifier (plus and minus) can be useful,
but are not exposed. Assuming the particle system was capable, the
eigenvectors could be used to drive spray emission velocities.
This exposes the controls to allow a map to be generated from these
eigenvectors. Currently, the values are mapped into a 0-255 range
similar to foam.
Differential Revision: https://developer.blender.org/D7182
These changes are smaller, made based on feedback and a pass on all
the layouts for clarity and consistency. The Multires modifier UI will
be addressed in a separate patch. Here is an overview of the changes:
Renaming Options:
- Build: "Start" -> "Start Frame"
- Curve: "From Radius" -> "Size from Radius"
- Screw: "Calc Order" -> "Calculate Order"
- Displace, Warp, Wave: "Texture Coordinates Object" -> "Object"
Move Mode Toggle to Top & Expand:
- Bevel, Boolean, Normal Edit, Subdivision
Use Columns for Tighter Spacing:
- Displace, Explode, Ocean, Particle Instance, Remesh, Shrinkwrap,
Solidify, Warp, Weighted Normal, Wave
Misc:
- Bevel: Set inactive properties for vertex bevel
- Mesh Sequence Cache: Remove box for cache file
- Skin: Don't align "Mark Loose" and "Clear Loose"
- Array: Expand relative offset subpanel by default
- Array: Move start cap, end cap to a new subpanel
- Bevel: Move width type above width
Differential Revision: https://developer.blender.org/D8115
Added an offset field to control when to load the simulation files. Since this is a very small but helpful addition it is in my view safe to commit at this point of the bcon cycle.
Similar track as for normal mesh. Don't store the tangent normals in CustomData
of the mesh, but in an unassociated CustomData instance.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D8161
When the film is set to transparent the environment pass should still be
rendered solid. otherwise it renders black.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D8046
This avoid having a much higher memory footprint as the underlying texture
size allocated by the driver is likely to be much higher (rounded to next
Power of 2 or other alignement requirements).
This adds three functions to check the state of the stroke in the
StrokeCache, removing the references to first_time and
mirror_symmetry_pass from the code. This makes easier to understand what
each code path is doing inside of each tool.
Some tools were using mirror_symmetry_pass incorrectly, so this should
also fix unreported bugs with radial and tiling symmetry related to that.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8164
When drawing a primitive, the color was always assigned as vertex color, so it was impossible to change it in the material settings.
Now, the color is set to material color or vertex color as expected.
In order to ensure correct operation of the rest shape key feature,
it's necessary to create a temporary copy of the mesh with rest
vertex positions to run the BVH lookup on. If the rest shape key
isn't used, there is no need for additional overhead.
Computing the original volume should use the rest positions of vertices,
like is done for initializing other parts of the simulation like springs.
Otherwise, features like rest shape key don't work correctly.
This is legacy code from before Eevee and Workbench rendering in background
mode was supported. Avoid memory leak by only queueing GPU textures to be
freed when we know they have been allocated.
Differential Revision: https://developer.blender.org/D8172
Was caused by weird and feedback-loop based issue from a long time ago.
The auto-render was only happening for nodes which are tagged for exec.
This tag is assigned by edit operations on the tree (for example, when
adding or removing links). It is also set in the render pipeline for
nodes which are to be executed.
The issues comes from the fact that "life updates" during editing did
not clear the need_exec flag, ever. This made it so Auto Render was
working as expected. However, rendering the scene resets need_exec
flags at the end of rendering using ntreeCompositClearTags().
The actual need of such clear is not very clear, but it was making it
so Auto Render does not work after render.
To my knowledge the flag didn't really meant that the node is connected
to the output, so it couldn't have acted as attempt to ignore rendering
of an unused scene. It also should be possible to auto-render even if
node tree itself was never altered.
Long story short: lets ignore need_exec flag in auto-render check and
render scene node if the scene is used by the node.
Differential Revision: https://developer.blender.org/D8171
Take the do_id_user flag into account when freeing custom properties
attached to pose channels, so that pointer properties don't cause
assertion failures when DEG frees its COW instances.
Support custom-data correction based on surrounding geometry for all
transformation modes of the mesh transform operators.
The is the same logic used in Vert and Edge Slide.
In order not to change the current default behavior,
this property does not affect Vert and Edge Slide modes.
Apple's Nvidia driverPROXY check also fails. Now the
configuration Apple/Nvidia will also bypass the
Proxy test.
Maniphest Tasks: T78175
Differential Revision: https://developer.blender.org/D8160
Change extraction callbacks to take index ranges instead of calling them
for each mesh element (poly, loop, vert & edge).
This gives a minor overall performance gain in my tests, ~5% on average.
Details:
- Use typed parameter structs and macros for looping over elements.
Without this, changes to these callbacks is time consuming as changes
need to be made in many places.
- Avoid iterating over polygon-loops when iterating over polygons
is sufficient.
- Simplify logic to access adjacent loops for faster line extraction.
- Rename 'loop' iterators to 'poly' (as they take polygon ranges)
the iterator callbacks can operator on either polygon or loop data.
- Use term 'last' for the last index (inclusive),
use 'end' when this value (not inclusive).
This renames the layer persistent base and adds new API functions to get
the mesh state from the base, so it can be used from other tools and
replaced in the future with a better system.
Reviewed By: sergey
Maniphest Tasks: T77738
Differential Revision: https://developer.blender.org/D8003
The color picker and brush->rgb values are in srgb, but sculpt vertex
colors works in linear, so they need to be converted.
Reviewed By: sergey
Maniphest Tasks: T78201
Differential Revision: https://developer.blender.org/D8111
This implements a fill mode in the Color Filter tool, which fills the
entire mesh with a specific color.
As this functionality is part of the color filter, this allows to control
the blending of the fill color with the filter strength.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8158
Previously it was not possible to tell appart a linked data-block from its
override copy. In fact you couldn't tell appart any data-blocks with the same
name (which is possible with linking).
Now we show the library state icon as we do for data-blocks in other display
modes.
Old/new comparison (note the overriden "GEO-head"):
{F8608835} {F8608836}
The new simulation type can also reference a point cache, but it is not an object.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D8097
This changes the drawing by drawing 2 circles with different intensity to
avoid any readability issues. This removes the need for Logic OP which is
implementation dependent.
Previously if a modal operator is active, which might leave Blender in a state
where it's not safe to autosave, it would try again in 10s. Now try again in
10ms so it's much less likely to be missed, since overhead of such a timer is
negligble anyway.
Also remove the debug print that was added to investigate a bug at some point.
This option allows posing meshes with different disconnected elements
using the Pose Brush.
This is achieved by doing the following:
- Creating an ID per vertex that stores the connected component of that vertex.
- By using those IDs, one fake topology connection is created per vertex to the nearest vertex in a different ID. The maximum distance to create that connection is determined by the "Max Element Distance" property. These fake connectivity neighbors are used in the Sculpt API functions iterators, so all the algorithms of the Pose Brush can run without modifications as if everything was part of the same mesh.
In order to make this work, the "Connected only" property of the Pose Brush needs to be disabled. This will add an extra performance cost to the Pose Brush and its preview. To achieve optimal results, max element distance should be as low as possible.
Reviewed By: sergey, campbellbarton
Differential Revision: https://developer.blender.org/D7282
This is a fix for c7694185c9. An object without base can still be in the
depsgraph, and then the `VIEW_LAYER_EVAL` node does not exist.
This popped up while @Sergey was looking into T78264.
Snap to faces and edges is now enhanced in the Edge Slide.
It works in the same way that it already works in the Vert Slide.
Basically it now snaps to the intersection of the slid edge with the
face plane or the edge line.
This one now uses a generic 'dependency detection' process to decide
which IDs should be overridden.
This will e.g. allow to override mesh and shapekeys when those have some
values controlled by drivers using an armature bone...
Note that this code is rather rough and slightly hacky, a proper
solution needs to be designed at some point probably, but for now this
should work fine.
As usual, master collections and root node trees remain TODO for now.
Note that this is partially WIP code, we only take care of shapekeys
here for now.
Also, move this tagging for liboverride refresh into same chack as the
one for tagging editors, sounds more logical that way.
IDs like embedded ones (master collections, root node trees) cannot be
linked, and thus cannot be real override themselves.
Since they are managed by their owner ID, that one will also have the
overrides for their locally edited properties.
We still need a way to mark them as overridden though, for various UI
and override-internal purposes, this is done using a new ID flag.
Note that since Shae Keys are not linkable, and their pointers are not
editable in RNA, they are also considered as embedded from override
point of view.
Apply the workaround only for known problematic drivers. The latest pro driver
appears to work correctly, hopefully the regular driver will as well once it
is updated to the same OpenCL driver version (3075.13).
The Alembic exporter has been restructured by leverages the
`AbstractHierarchyIterator` introduced by the USD exporter. The produced
Alembic files have not changed much (details below), as the Alembic
writing code has simply been moved from the old exporter to the new. How
the export hierarchy is handled changed a lot, though, and also the way
in which transforms are computed. As a result, T71395 is fixed.
Differences between the old and new exporter, in terms of the produced
Alembic file:
- Duplicated objects now have a unique numerical suffix.
- Matrices are computed differently, namely by simply computing the
evaluated transform of the object relative to the evaluated transform
of its export-parent. This fixes {T71395}, but otherwise should
produce the same result as before (but with simpler code).
Compared to the old Alembic exporter, Subdivision modifiers are now
disabled in a cleaner, more efficient way (they are disabled when
exporting with the "Apply Subdivisions" option is unchecked). Previously
the exporter would move to a new frame, disable the modifier, evaluate
the object, and enable the modifier again. This is now done before
exporting starts, and modifiers are only restored when exporting ends.
Some issues with the old Alembic exporter that have NOT been fixed in
this patch:
- Exporting NURBS patches and curves (see T49114 for example).
- Exporting flattened hierarchy in combination with dupli-objects. This
seems to be broken in the old Alembic exporter as well, but nobody
reported this yet.
Differential Revision: https://developer.blender.org/D7664
Reviewed By: Sergey
Solves problem with different order of codesign server startup and
mount of network shares: avoids exception happening when server is
started prior to the mounts are ready.
See rB1fa40c9f8a81 for more details. The implementation is the same.
The only difference to the mesh modifier commit is a slight rework of
edit_modifier_invoke_properties in order to pass through to check for
other keymap items with the same shortcut.
The template was disorganized and didn't fit with the new layout style.
| Old | New |
| {F8641166 size=full} | {F8641167 size=full} |
Differential Revision: https://developer.blender.org/D8113
The shortcuts act on the modifier with its panel under the mouse.
The following shortcuts are enabled by default:
- Remove modifier: X, Delete
- Apply modifier: Ctrl A
- Duplicate modifier: Shift D
More shortcuts can be added in the keymap.
Each panel can now store a custom data RNA pointer, and a new
function is added to get the custom data for the panel under the
cursor. This custom data could be used to refactor the "List Panel
System" to generalize it and integrate it further with RNA.
The same functionality will be added in further commits where it
applies to constraints, grease pencil modifiers, and effects.
Differential Revision: https://developer.blender.org/D8031
Threaded Sculpt is now always enabled by default. If it causes
performance problems compared single threaded sculpt it should be
considered a bug.
Reviewed By: sergey
Maniphest Tasks: T77638
Differential Revision: https://developer.blender.org/D7960
Needs to compile with `CMAKE_OSX_DEPLOYMENT_TARGET` of 10.14 at least to
have `std::optional<>::value()` available. So we have to increase the
minimum required compiler version, but that requires more changes. Just
fix the build error for now.
Rather than a `L` (linked), `O` (overridden) or `M` (missing) prefix for the
name, show the existing library status icons. See D7999 for screenshots.
Note that when using preview icons, or if the search menu contains items with
own icons (e.g. brush icons), we still fallback to the prefix solution.
Zero or fake user is still indicated with a prefix.
Differential Revision: https://developer.blender.org/D7999
Reviewed by: Bastien Montagne, William Reynish
This is important at several level, mainly for overrides currently.
Note that this also includes shape keys, since from RNA point of view
those are also 'embedded' (they are not editable, not linkable, ...).
Since makesrna runs after all properties have been defined, we have to
remember with a new internal flag when we explicitely disable the
'PROP_PTR_NO_OWNERSHIP' flag for a property.
Otherwise there was no way to do so for ID pointer properties...
Consistency with e.g. copying (copying a mesh also duplicates its
shapekey typically).
Baby step towards getting rid of this horrible ID, some day...
Note that for now we only do that when taking BMain into account, fancy
code dealing with non-main IDs and such has to deal with those itself.
The report does not include any file, but probably that file is using the
settings for unified colors, which are currently not available in the UI,
so it always paints black. This enables unified colors and secondary
colors for sculpt vertex colors, so it should solve that issue.
Unified color does not make much sense now as the Paint tool is the only
one that has paint capabilities, but it will do in the future when
sculpt and paint at the same time is enabled and the paint capability is
added to more tools.
Reviewed By: sergey
Maniphest Tasks: T78323
Differential Revision: https://developer.blender.org/D8136
The defaults for the Smear tool were making it too weak in high poly
meshes, specially the alpha/pressure option enabled by default. Now this
option is disabled, it has a linear pressure curve and less spacing.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8134
Also create the 'simple fill' in case there are only empty material
slots.
Maniphest Tasks: T78401
Differential Revision: https://developer.blender.org/D8151
This fixes the issue by using the polyline shader but this does not gives
the best results.
A better way would be to have a dedicated shader for the lines to avoid
the line break at every angle change.
In the viewport an object can be set to be displayed as wire. When
rendering the viewport this setting is ignored and follows the
path or doing a final render. This patch will add an exception
when rendering a viewport render.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D8043
Now, instead of select the section of the stroke that is below circle, only the points inside circle are selected.
Also fixed a bug when segment selection mode is enabled.
Differential Revision: https://developer.blender.org/D8141
When there is no system python OSL will fail to build the documentation.
Given we don't ship the documentation, this is safe to disable.
Originally part of D8123
Since the function only iterates over the input members,
and matches their identifiers, `bNode *`can be `const`.
All other usages of the `nodeFindSocket` use it with
other functions that modify the node. (e.g.: ``nodeAddLink` )
But an exporter needs the node to be a `const`, so this
creates unnecessary and slightly unsafe design changes.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D8142
Some audio render settings were hidden in the scene properties. These
settomgs belong in the render properties as they affect the output when
using ffmpeg video.
Fixes T49241
Differential Revision: https://developer.blender.org/D8137
The selection with the tweak tool was inprecise because it was using the bounding box and if the point was in a straight line in the border or in the corners it was very hard to select.
For this tool is better don't use the bounding box check.
Using a number greater than 1 produce a huge number of entries in the palette because any small variation in the color create a new entry.
Remove the threshold reduce the precision of the color extracted, but always is better than having a palette with thounsands of colors.
Related to T78317
Still pending the memory crash when it's impossible to allocate memory for the palette in the popover, but with this change I don't think we get this error again.
Previously, the text rotation was always calculated in object space, so
the text rotation always had the object rotation applied. Now the
rotation is calculated in world space, so it always aligns correctly to
the view. Same applies to text scale not taking into account the object
position.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8068
This is a long-standing bug, possibly proportional editing never worked
in particle mode.
Some parameter definitions in the transform code are scattered and
sometimes duplicated.
Proportional editing is a parameter that depends only on the Convert
type and not `spacetype`, `CTX_` or `obedit_type`.
Enabling offset property caused strip to produce `SEQ_CACHE_STORE_RAW`
type image, which is kept in temp cache and is not invalidated.
Change update functions for all properties of effect strips that affect image
to `rna_Sequence_invalidate_raw_update`.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8132
Don't auto update render passes in nodes when unregistering render passes or
quitting Blender, this should only happen on explicit user action to change the
engine or passes.
In rBeaee2b411935 I removed BKE_sequencer_base_clipboard_pointers_store from
paste function, because I wanted pasted strip to always reference copied
strip, not recently pasted one. This worked well with ordinary strips, but not
if they reference ID.
Add back BKE_sequencer_base_clipboard_pointers_store call.
I thought that always referencing original strip would be more correct approach,
but it doesn't matter now. Referencing recently pasted seems to be cleanest way
to do this.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8129
Pass is_proxy_image to functions where images are loaded instead of comparing
image size to render size.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8128
Call function `BKE_scene_multiview_view_prefix_get` to ensure ext is not
NULL.
This already should happen in `seq_image_strip_is_multiview_render` though.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8081
This does not work, because the fluid modifier is not called when the
object is e.g. in edit mode. Another possible fix would be to switch
to object mode when baking starts automatically. However, I think it
is reasonable to simply not allow baking while the domain is in edit mode.
Reviewers: sebbas
Differential Revision: https://developer.blender.org/D7848
The `Base *` parameter of `DepsgraphRelationBuilder::build_object()` was
made redundant by c7694185c9. This commit actually removes it.
No functional changes.
When there is an odd number of segments, bevel has an ambiguous
choice as to which side face to use to copy face attributes from
and to use for UV (and other loops that have math function) interpolation.
We used to make choice arbitrarily, which led to visually inconsistent
results. Now there is tie-breaking code, face with lexicographic lowest
value in vector with these elements:
(1) connected component (in math-layer space) id
(2) selected (0) vs unselected (1)
(3) material index
(4,5,6): z,x,y components of face center, in that order.
A driver reading `Object.hide_viewport` would break when that object was
hidden. Hidden objects don't have the `OBJECT_BASE_FLAGS` node in the
depsgraph, but that node was required for the driver to work.
Now the `OBJECT_FROM_LAYER` component (which optionally contains the
`OBJECT_FROM_LAYER` node) has explicit `ENTRY` and `EXIT` nodes, which
are used for relations with other components. These relations now remain
valid, even when the `OBJECT_FROM_LAYER` node is absent.
Differential Revision: https://developer.blender.org/D8124
Reviewed By: sergey
Steps to reproduce were:
* Load factory settings
* Link any library
* Change to "Blender File" display mode in Outliner
* Enable filtering
* -> Assert fails
This may have had further side-effects for linked IDs.
Checked with Bastien, the NULL-check seems reasonable. It was initially there
but removed in d74f9c4b7b.
Fine to backport.
When doing a release build the TBB debug libs are not
set which was causing an error during the configure
phase of USD, so always set them even if not used.
Fixes issue where lines in timeline are sometimes double-width when hovering in area.
Differential Revision: https://developer.blender.org/D8116
Reviewed by Brecht Van Lommel
This patch fixes T77878 in the same way that T72747 was fixed.
A hard minimum for the voxel size was added to avoid an arithmetics error.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8027
Always initialize the particle velocity of newly sampled particles to 0 if there are no initial velocities. Clearing the grid source makes sure that new particles will get a 0 velocity - and not interpolated from the associated grid.
The displace modifier's uv_layer property should be a pointer in the new
UI like the other modifiers use.
Differential Revision: https://developer.blender.org/D7990
Right now not all the features available there have the same level of
polishing. So I split the existing options in:
* New Features [Particles Nodes]
* Prototypes [Hair]
* Debugging [Undo]
Differential Revision: https://developer.blender.org/D8121
This reverts commit baa0da3e69.
The commit causes some issues I didn't foresee, I'd rather take the time
to do it properly than hastily try and commit a fix for it.
An object can be targeted by a driver that reads its `hide_viewport` or
`hide_render` property. The existence of such a driver will create a
relation between the 'sync base flags' depsgrpah node, and the datablock
containing the driver. When the object is hidden, however, it has no
base, and thus it had no 'sync base flags' depsgraph node. To support
such a driver, that depsgraph node is now always added, but for hidden
objects it will just be a no-op. If the node is not used by anything, it
will be automatically disconnected and have a negligible effect on
performance.
This requires ISPC for building OpenImageDenoise, so that is now added as
a dependency as well. Blender itself does not need ISPC for building so it
is not included as part of the precompiled libraries.
Differential Revision: https://developer.blender.org/D7641
Blender has an operator to do Copy & Paste of constraints between
objects and bones, but no simple method to do that directly via
the Python API is provided. This adds a copy() method to object
and pose bone constraint collections.
Differential Revision: https://developer.blender.org/D8112
Latest SteamVR OpenXR updates brought OpenGL support, but only with sRGB
buffers. I think for DirectX it's the same now.
It's not a big issue for us to use sRGB buffers, so that's what I will
do for now. That way we shouldn't need hardcoded exceptions for specific
runtimes that don't transform linear buffers correctly.
When we switched to MSVC2019 and C++17 we seemingly
managed to trigger a code-gen bug with MSVC in the
AVX code-path.
This change works around the issue by (hopefully
temporary) disabling the optimizer for the fast_exp2f4
function, given it is only used in a single pass
of the denoiser and nowhere else, this is luckily
not as bad as it could have been.
Once the compiler is fixed or a different fix is
available we'll have to revisit this.
Details and link to the repro posted to MS is
available in T78047
Under the hood the CurveProfile widget (used for bevel custom profiles)
uses a bezier curve, but right now though it only supports two of the
bezier curve handle types, vector and auto. This patch adds support for
free handles and adds all of the logic for editing them.
This is the first step to the ability to import and export curve objects
in the widget.
There's some code cleanup in curveprofile.c. Movement for handles and
control points is abstracted to functions there rather than happening
in interface_handlers.c.
An "Apply Preset" button is also added, which solves a confusing issue
where you apply a preset, then change the number of samples and the
preset doesn't change. The button makes it clear that the preset needs
to be reapplied.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D6470
The clay strips brush tip tests distances against a cube with beveled Z
aligned edges. This cube was positioned with its center in the surface
of the mesh, so when producing large deformation, some vertices that
should be deformed were positioned further than the cube's Z dimension,
so they were left behind, producing artifacts.
This displaces and deforms the local space to position the brush tip
cube (now a prism) towards the deformation direction, so more vertices
can be included, removing most of these artifacts.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8004
The face sets color copy to the GPU was done outside of the loop,
probably after a merge error in a rebase.
Also, the default color was initialized using the wrong type.
Reviewed By: sergey
Maniphest Tasks: T78188
Differential Revision: https://developer.blender.org/D8106
The draw face set tool always needs to redraw the nodes, but it only
needs the full update when in smooth mode because it moves the vertices.
Reviewed By: sergey
Maniphest Tasks: T78192
Differential Revision: https://developer.blender.org/D8108
This was caused by the override viewport size not being maintained after
DRW_cache_restart().
Also this fixes issue with the inv_size not being updated correctly.
It was only checking for the identifier, but the type has to be equivalent as well.
Reviewers: mano-wii, brecht
Differential Revision: https://developer.blender.org/D8101
This commit makes uses of the new OpenVDB IO in Mantaflow (introduced in 781f783a66ac).
From now on, fluid cache files in OpenVDB format will contain a list of grids per frame (before: one .vdb file per grid per frame). Besides regular grids, particle systems are also stored using OpenVDBs PointGrid data structures.
All older cache formats will remain fully functional:
- Uni caches (.uni) files are still available from the UI and can be used as before
- Raw caches (.raw) are no longer available from the UI, but loading them is still possible
- Old OpenVDB caches (one .vdb per grid) can no longer be baked either, but loading them is still possible.
It is also no longer possible to choose file formats for 'Noise' and 'Particles'. Instead there are now options to set the file format for 'Volumetric' and for 'Mesh' data.
Known issues (planned to be resolved soon):
- OpenVDB files are currently not taking into consideration the clipping value (FluidDomainSettings). Empty cells are therefore being written too. Depending on the scene, this can make file sizes unnecessarily large.
- Domains are not being exported at their world position. Instead they are always clipped to the origin.
This updated set of Mantaflow files includes the improved OpenVDB file IO. With this update it is finally possible to store multiple grids per file. It is also possible to save particle systems and particle data to OpenVDB files.
Compared to Optix denoise, this is usually slower since there is no GPU
acceleration. Some optimizations may still be possible, in avoid copies
to the GPU and/or denoising less often.
The main thing is that this adds viewport denoising support for computers
without an NVIDIA GPU (as long as the CPU supports SSE 4.1, which is nearly
all of them).
Ref T76259
Enabling render and viewport denoising is now both done from the render
properties. View layers still can individually be enabled/disabled for
denoising and have their own denoising parameters.
Note that the denoising engine also affects how denoising data passes are
output even if no denoising happens on the render itself, to make the passes
compatible with the engine.
This includes internal refactoring for how denoising parameters are passed
along, trying to avoid code duplication and unclear naming.
Ref T76259
This must match the specified number in enum items, and is supported for both
static and dynamic enums. Previously dynamic enums did not support a default
value at all.
This was caused by the step motion blur implementation.
`DRW_cache_restart` was reseting the cache and cause
`EEVEE_renderpasses_postprocess` to not work inside
`EEVEE_render_read_result`.
Draw-manager mutex has to be set before activating OpenGL/GPU context.
Otherwise, parallel jobs (like preview rendering) may try to activate
the context from another thread.
Also: Use WM wrappers for activating/releasing OpenGL context, which
have an additional assert check.
Suggest to backport this for 2.83.1.
It turns out that
`DepsgraphNodeBuilder::build_object_data_geometry(Object *object, bool
is_object_visible)` was called for the custom shape with
`is_object_visible=false` when there are drivers, and
`is_object_visible=true` when there aren't any.
Sculpt Vertex Colors is a painting system that runs inside sculpt mode, reusing all its tools and optimizations. This provides much better performance, easier to maintain code and more advanced features (new brush engine, filters, symmetry options, masks and face sets compatibility...). This is also the initial step for future features like vertex painting in Multires and brushes that can sculpt and paint at the same time.
This commit includes:
- SCULPT_UNDO_COLOR for undo support in sculpt mode
- SCULPT_UPDATE_COLOR and PBVH flags and rendering
- Sculpt Color API functions
- Sculpt capability for sculpt tools (only enabled in the Paint Brush for now)
- Rendering support in workbench (default to Sculpt Vertex Colors except in Vertex Paint)
- Conversion operator between MPropCol (Sculpt Vertex Colors) and MLoopCol (Vertex Paint)
- Remesher reprojection in the Voxel Remehser
- Paint Brush and Smear Brush with color smoothing in alt-smooth mode
- Parameters for the new brush engine (density, opacity, flow, wet paint mixing, tip scale) implemented in Sculpt Vertex Colors
- Color Filter
- Color picker (uses S shortcut, replaces smooth)
- Color selector in the top bar
Reviewed By: brecht
Maniphest Tasks: T72866
Differential Revision: https://developer.blender.org/D5975
Forgot to update the lineOutput what resulted in that the sphere was not
rendered on all platforms.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D8098
Tangent normals were temporarily saved in the original given layers but
the typeinfo wasn't updated. This lead to several issues since we
changed the threading of the mesh extraction.
This patch stores the tangent normals in a temporary custom data on the
stack this way the typemap doesn't need to be updated.
Still need to run the tests for an hour to see if it is fixed
Reviewed By: Clément Foucault, Philipp Oeser
Differential Revision: https://developer.blender.org/D8095
This revisit the render pipeline to support time slicing for better motion
blur.
We support accumulation with or without the Post-process motion blur.
If using the post-process, we reuse last step next motion data to avoid
another scene reevaluation.
This also adds support for hair motion blur which is handled in a similar
way as mesh motion blur.
The total number of samples is distributed evenly accross all timesteps to
avoid sampling weighting issues. For this reason, the sample count is
(internally) rounded up to the next multiple of the step count.
Only FX Motion BLur: {F8632258}
FX Motion Blur + 4 time steps: {F8632260}
FX Motion Blur + 32 time steps: {F8632261}
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D8079
The header of all SPACE_ACTIONs are tagged for redraw. Only when the
action editor is showing the timeline it is needed. No noticeable
performance increase. But better to save some CPU cycles.
Reviewed By: Sybren Stüvel
Differential Revision: https://developer.blender.org/D8074
When playing back animations a playhead is updated in all the animation editors.
The drawing of the playhead is part of the drawing of the main region
`RGN_TYPE_WINDOW` that redraws the whole region.
This change will draw the play head and window scrollers when updating the
screen. This affects the Action editor, Timeline, Graph editor, NLA editor and
Sequence editor. There is noticeable speedup when using complex animation files.
Spring 02_020_A.anim.blend fps went from 11.8 to 12.5 when showing a timeline
and a action editor on a Ryzen 1700.
* When playing back animation the markers don't jump up/down when near the
frame. This could be added back.
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D8066
This replaces the cmake options `WITH_NEW_OBJECT_TYPES` and
`WITH_NEW_SIMULATION_TYPE` with two experimental userpref settings:
* `use_new_particle_system`: Enables the point cloud type and the simulation editor.
* `use_new_hair_type`: Only displays the add-operator in the add menu for now.
Note, in the current state you can't do anything productive with the new particle
system or the new hair type. Features will be added step by step in the upcoming
weeks and months.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D8096
When neither bounds or median is selected, snapping the cursor to
the selection was using bounds which often doesn't give useful results.
Resolves T78135
A multi-function network is a graph data structure, where nodes are
multi-functions (or dummies) and links represent data flow.
New multi-functions can be derived from such a network. For that
one just has to specify two sets of sockets in the network that
represent the inputs and outputs of the new function.
It is possible to do optimizations like constant folding on this
data structure, but that is not implemented in this patch yet.
In a next step, user generated node trees are converted into a
MFNetwork, so that they can be evaluated efficiently for many particles.
This patch also includes some tests that cover the majority of the code.
However, this seems to be the kind of code that is best tested by some
.blend files. Building graph structures in code is possible, but is
not easy to understand afterwards.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D8049
This will allow the easier addition of a constant radius mode in the
future and some changes in the UI to mirror the recent similar change
from "Only Vertices" to the "Affect" enum.
View2DScrollers used the memory manager to allocate memory. This isn't a
problem but in a upcoming change the scrollers will be drawn more often
than it used to (See {D8066}). To limit the number of allocations and
frees this patch will use the stack for allocation.
Reviewed By: Campbell Barton
Differential Revision: https://developer.blender.org/D8076
This completes T66426.
Since Vert Slide supports these other snapping types (since rBe2fc9a88bc),
it would be easy to miss this on Edge Slide.
So add support for Edge Slide too.
This means all the antiailasing is done inside the fragment shader.
We use a Signed Distance Field to draw the 2D rounded boxes. This ensure
the best quality for AA.
This reduce the averge Batch for widget to 16 verts instead of ~600 and
reduce overshading a lot.
Theme Emboss alpha and tria alpha needs to be changed after this refactor.
The shadow drawing is left unchanged and still use geometry.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D7833
Thanks @mont29 for this patch.
This creates an explicit undo step after the Alembic importer has finished
running. This is necessary when the importer runs as a background job.
The icons for toggling fake users on orphan datablocks in the outliner
were drawn as the quit and x icons instead of the fake user icon. This
changes to the correct icon, and removes the redundant "F" column.
Is lazily-initialized array owned by the SubdivCCG. Allows to access
index of a first grid of a given face in the flat array of grids.
Currently unused, but is needed for multires bake.
Now all options for "snap to" affect the Vert Slide mode.
Reviewed By: campbellbarton
Maniphest Tasks: T66426
Differential Revision: https://developer.blender.org/D3440
For GPU debugging purposes, it is still possible to render with the same BVH2
on the CPU using the Debug panel in the render properties.
Note that building Blender without Embree will now lead to significantly reduced
performance in CPU rendering, and a few of the Cycles regression tests will fail
due to small pixel differences.
Ref T73778
Depends on D8014
Maniphest Tasks: T73778
Differential Revision: https://developer.blender.org/D8015
Also removing the curve system manager which only stored a few curve intersection
settings. These are all changes towards making shape and subdivision settings
per-object instead of per-scene, but there is more work to do here.
Ref T73778
Depends on D8013
Maniphest Tasks: T73778
Differential Revision: https://developer.blender.org/D8014
This keeps render results compatible for combined CPU + GPU rendering.
Peformance and quality primitives is quite different than before. There
are now two options:
* Rounded Ribbon: render hair as flat ribbon with (fake) rounded normals, for
fast rendering. Hair curves are subdivided with a fixed number of user
specified subdivisions.
This gives relatively good results, especially when used with the Principled
Hair BSDF and hair viewed from a typical distance. There are artifacts when
viewed closed up, though this was also the case with all previous primitives
(but different ones).
* 3D Curve: render hair as 3D curve, for accurate results when viewing hair
close up. This automatically subdivides the curve until it is smooth.
This gives higher quality than any of the previous primitives, but does come
at a performance cost and is somewhat slower than our previous Thick curves.
The main problem here is performance. For CPU and OpenCL rendering performance
seems usually quite close or better for similar quality results.
However for CUDA and Optix, performance of 3D curve intersection is problematic,
with e.g. 1.45x longer render time in Koro (though there is no equivalent quality
and rounded ribbons seem fine for that scene). Any help or ideas to optimize this
are welcome.
Ref T73778
Depends on D8012
Maniphest Tasks: T73778
Differential Revision: https://developer.blender.org/D8013
The kernel did not work correctly when these were disabled anyway. The
optimized BVH traversal for the no instances case was also only used on
the CPU, so no longer makes sense to keep.
Ref T73778
Depends on D8010
Maniphest Tasks: T73778
Differential Revision: https://developer.blender.org/D8011
The hair BSDFs are already designed to assume this, and disabling backface
culling would break them in some cases.
Ref T73778
Depends on D8009
Maniphest Tasks: T73778
Differential Revision: https://developer.blender.org/D8010
Triangles were very memory intensive. The only reason they were not removed yet
is that they gave more accurate results, but there will be an accurate 3D curve
primitive added for this.
Line rendering was always poor quality since the ends do not match up. To keep CPU
and GPU compatibility we just remove them entirely. They could be brought back if
an Embree compatible implementation is added, but it's not clear to me that there
is a use case for these that we'd consider important.
Ref T73778
Reviewers: #cycles
Subscribers:
No significant performance improvement is expected, but it means we have a
single thread pool throughout Blender. And it should make adding more
parallellization in the future easier.
After previous refactoring commits this is basically a drop-in replacement.
One difference is that the task pool had a mechanism for scheduling tasks to
the front of the queue to minimize memory usage. TBB has a smarter algorithm
to balance depth-first and breadth-first scheduling of tasks and we assume that
removes the need to manually provide hints to the scheduler.
Fixes T77533
* Fixed selection of point in multiframe mode. The point was not selected.
* Removed the fill area selection because makes the tool imprecise, and for this tool need to be precise or the selection is impossible. Now only select if it's over the point, not over the filled area.
Always use the default size here, since desired bounds have been set
interactively, it does not make sense to use a different size from a
previous command.
Maniphest Tasks: T77942
Differential Revision: https://developer.blender.org/D8056
- Head / Tail was stuck on two rows. It seems there is an issue with
headings here, which means the first property has to place its own
label. (So for example the small button can't be first in the row.)
- Some misalignment and decorator fixes for aligned toggles
Walk navigation used a separate flag to select the element. This is
because activation and mode toggling were connected until rB702e00f91088
cleaned up the selection logic.
Now walk navigation can activate objects and other elements without
changing modes. This also addresses renaming in the outliner which
did renaming from the active element, not the walk element.
Draw Face Sets does not work in Dyntopo and the sculpt API should be
responsible for that without needing to add checks all over the code,
but it was doing an undo push of type SCULPT_UNDO_FACE_SETS which is not
supported, causing the crash.
Reviewed By: sergey
Maniphest Tasks: T77328
Differential Revision: https://developer.blender.org/D7924
Since rB47f98a38d0f8 not all 3 effect inputs were assigned anymore. Their
ImBuf's rect was accessed though in do_glow_effect (even though unused in
the following dedicated functions).
Just pass NULL here instead.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D8064
Draco sets CMAKE_CXX_STANDARD to 14, given we
set the c++ standard in the root level CMakeLists.txt
to c++17 this generated build warnings.
Given the rootlevel one is the one we want we can
safely remove this line in dracos cmakelists
This mode is like Percent, but measures absolute distance along
adjacent edges instead of a percentage.
So, for example, if you use this mode with 2 segments and profile=1,
you will see the length that the bevel moves along unbeveled edges
between beveled ones will match the value specified.
Many users seem to expect this behavior, even though it means the
bevel width is uneven, so this option is for them.
This patch implements the list panel system D7490 for grease pencil
shader effects. It also moves their drawing to a callback in
ShaderFxTypeInfo in line with the extensible architecture refactoring
goal T75724.
The implementation is basically exactly the same as for the modifier
patch (9b099c8612).
Thanks to Matias Mendiola (@mendio) for helping to develop the layout
changes.
Differential Revision: https://developer.blender.org/D7985
No functional changes. The outliner selection operators shared many
different functions for selection, activation, mode toggling, and other
actions, but the code paths were not always clear, making any changes
difficult.
This cleans up the code and uses outliner_item_select() as the base
function for selection, activation, mode toggling between the different
selection operators. It also prepares for future features and fixes.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D5817
This patch implements the list panel system D7490 for grease pencil
modifiers. It also moves their drawing to a callback in
GpencilModifierTypeInfo in line with the extensible architecture
refactoring goal T75724.
This also adds the "set_error" function for grease pencil modifiers,
which hadn't been copied from mesh modifiers yet.
The implementation is basically exactly the same as for the modifier
patch (9b099c8612).
Thanks to Matias Mendiola (mendio) for providing mockups for many
of the layout changes.
Differential Revision: https://developer.blender.org/D7978
Steps to reproduce were:
* From factory settings, change Outliner Display Mode to "Blender File"
* Open "Screens" item, make sure all listed screens are visible
* Open Preference window, close it
* Mouse hover the outliner -> crash
Fix is to force an Outliner tree rebuild when closing screens.
The lookup to find the hovered Outliner tree element would possibly check
children that can be skipped with a simple check.
I experimented with various ways to avoid work in this lookup. This one is
simple and reliable, which others wouldn't have been afaics. Plus, there's not
much performance to be gained here anyway.
In big files, the Outliner would have a noticeable lag when opening or
collapsing items. That was because the entire tree was rebuilt, which isn't
actually needed in most cases. So we avoid it where possible now.
In big files, ie typical production files, resizing the outliner area would be
very slow. The outliner tree would be rebuilt then, which can easily be avoided.
This was due some strokes could be tagged and as the layer was locked, the strokes were not untagged and removed when all tagged strokes are removed.
The tagged strokes are used as temp ghost of the interpolation and removed at the end of the interpolation.
This patch implements the list panel system D7490 for constraints.
In this case the panels are still defined in Python.
The layouts are also updated to use subpanels and the a more organized
single column layout. There may be more tweaks necessary for the
layouts.
Reviewed By: Severin, billreynish, Mets
Differential Revision: https://developer.blender.org/D7499
The Blender USD code didn't have to change for this upgrade. Pixar's USD
did include a change that we had in the patch, so that's been removed
from our patch now. Some of the USD code that we patched changed as
well.
The `ABC_INLINE` macro has been in the Alembic code since it was introduced
to Blender in rB61050f75b13e. It basically does the same a `BLI_INLINE`,
though, so there is no need to keep it around.
This adds object motion blur vectors for EEVEE as well as better noise
reduction for it.
For TAA reprojection we just compute the motion vector on the fly based on
camera motion and depth buffer. This makes possible to store another motion
vector only for the blurring which is not useful for TAA history fetching.
Motion Data is saved per object & per geometry if using deformation blur.
We support deformation motion blur by saving previous VBO and modifying the
actual GPUBatch for the geometry to include theses VBOs.
We store Previous and Next frame motion in the same motion vector buffer
(RG for prev and BA for next). This makes non linear motion blur (like
rotating objects) less prone to outward/inward blur.
We also improve the motion blur post process to expand outside the objects
border. We use a tile base approach and the max size of the blur is set via
a new render setting.
We use a background reconstruction method that needs another setting
(Background Separation).
Sampling is done using a fixed 8 dithered samples per direction. The final
render samples will clear the noise like other stochastic effects.
One caveat is that hair particles are not yet supported. Support will
come in another patch.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7297
This will not give any noticeable improvements in common editing tasks,
since then usually only a very few IDs are changed and checked for
override updates.
However, it makes full override diffing process several times faster
(happens usually when saving a .blend file, but could also help e.g.
when multi-editing several override objects at the same time...).
Accessing this from RNA may actually create some data, which we do not
want to happen when comparing data. Further more, preview is not data,
but a view of it, so we should be safe ignoring it entirely here.
The important distinction for the linker flags is not between GCC and Clang,
but between the macOS and Linux.
Differential Revision: https://developer.blender.org/D8023
This commit only moves code into the `blender::io::alembic` namespace,
it does not move `static` functions into an anonymous namespace.
No functional changes.
This moves most of the exporter-related code
from `source/blender/io/alembic/intern`
to `source/blender/io/alembic/exporter`
This is to prepare the Alembic code for the switchover to using
`blender::io::AbstractHierarchyIterator`. When that happens, a few more
files will be added, and having things in a separate 'exporter'
directory makes things less cluttered.
Note that exporting consists of multiple steps (determine export
hierarchy, create Alembic archive, and then write data into it), which
is why the directory is called "exporter", but many of the files are
called "writer".
No functional changes.
The issue was caused by wrong conversion happening after some of the
proxies are removed. Easiest solution is to first remove proxies and
then add required converter operations.
Thanks Jeroen for the review!
Channels aren't visually changed by playing back an animation so there
is no need to do this. As rendering channels is using a lot of logic
(filtering animation data, converting fcurves to samples etc) it has an
noticeable overhead.
This change has no functional limitation. Users are still able to do
everything during animation playback. There are other mechanisms in
place that take care of that.
Spring 02_020_A.anim.blend went from 11.8 to 12.0 on a Ryzen 1700. I
didn't test with scenes but it should be more noticeable with more
complex scenes.
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D8073
This isn't really in C++ standard, some corner cases work in some
compilers (like when all fields are specified), but in general they
do not work.
For some reason MSVC builder started to complain about it now,
weird but better not rely on compiler specifics.
OSLRenderServices contains a member which is 64 bytes aligned and this
is onlys supported by default allocators in SDK 10.14. Since we take
care of allocation ourselves ignoring the diagnostic is an acceptable
way dealign with it.
AutoPtr class became a sub-class of unique_ptr with some special magic
to mimic behavior of auto_ptr for copy constructor.
The code was already there, but for some reason visual studio did not
set __cplusplus correctly for some reason.
The other change is remove of binary function usage, which is not
needed in the Freestyle code.
Are reported by MSVC 2019 after C++17 switch.
One might suggest lets just silence the warning, I will say why to have
specific signed/unsigned types in API just to then (usafely) ignore the
sign conversion.
Using latest master because of various compilation error fixes.
Brings a lot of recent development. From most interesting parts:
- New threading model.
- Tiny solver.
- Compatibility with C++17.
This is an intermittent state to get all dependencies to compile.
For example, the latest Ceres is needed to bring C++17 support,
but it has bumped minimal requirement to C++14.
Currently all force effectors can only act on cloth when the force is
perpendicular to the surface. This makes sense for wind, but not for
other forces; and the user may want even wind to have some friction.
This changes effector code to output two force vectors - although
you of course can pass the same pointer for both. The force is split
between the two outputs based on a new per-effector setting.
Differential Revision: https://developer.blender.org/D8017
Blender now always exports transforms as as "inheriting", as Blender has
no concept of parenting without inheriting the transform.
Previously only objects with an actual parent were marked as
"inheriting", and parentless objects as "non-inheriting". However,
certain packages (for example USD's Alembic plugin) are incompatible
with non-inheriting transforms and will completely ignore such
transforms, placing all such objects at the world origin.
When importing non-inheriting transforms from Alembic, Blender will
break the parent-child relation and thus force the child to (correctly)
interpret the transform as world matrix.
Other types already had spaces, periods, and colons replaced by
underscores. The upcoming Alembic exporter (based on the
`AbstractHierarcyIterator` class) will be more consistent and apply the
same naming rules everywhere. This is in preparation for that change.
The `get_…_name()` functions in `abc_util.{cc,h}` will be removed then.
Previously the Alembic exporter exported a mesh object to
`{object.name}/{object.name}Shape`. Now it exports to
`{object.name}/{mesh.name}` instead. The same change also applies to
other object data types.
Note that the code now is a bit hackish, as `m_name` is set even in
cases where it isn't used. This hackishness was already there, though,
but it's now just more visible. This will all be cleaned up when the
Alembic exporter is ported to use the `AbstractHierarchyImporter`
structure of the Universal Scene Description (USD) exporter.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D7672
Before this, there was one code path that set `context.export_path`, and
a different code path for `context.export_name`, allowing the two to
diverge.
Keeping track of the export path of the export parent (which can be, but
is not always, the Blender parent object) also allows a concrete
subclass of `AbstractHierarchyIterator` to find the `AbstractWriter` for
the export parent. In case of exporting to Alembic this is important, as
it's not possible to simply give the Alembic library the full export
path of an object like we do in the Universal Scene Description (USD)
exporter; Alembic needs the C++ object of the parent.
This is in order to prepare for compatibility with the Alembic exporter.
That exporter is capable of writing object transforms and object data at
different (sub)frames.
The rename from `created_writers` to `used_writers` is necessary, as not
all created writers will be actually used in each iteration.
The Universal Scene Description (USD) exporter does not make use of
this.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D7670
The goal of the `AbstractHierarchyIterator` class (and supporting
classes) was to use it in different exporters. It shouldn't be part of
the USD module + namespace any more, now that it will also be used in
the upcoming Alembic exporter rewrite.
The source files are moved into `io/common`, which is compiled & linked
into a new library `bf_io_common`. The unittests are still inside the
`tests/gtests/usd` directory. They should be moved to a separate test
module too, but that will be delayed until after T73268 has been
resolved.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D7669
The reason was the datablock is changed but it was not tagged for depsgraph refresh.
In some cases it could be possible to tag several times the same datablock, but as this is not the case all the times and the number of tags is always very small, it doesn't worth a complex code to keep a memory list of the datablocks to tag.
This removes G_FILE_HISTORY, G_FILE_SAVE_COPY & G_FILE_USERPREFS.
Using file-flags made logic harder to follow since it's not so clear
which flags are expected to be in G.fileflags & which are meant to be
set and passed as arguments, these are shared between read & write
functions too.
Add BlendFileWriteParams so options which don't need to be stored
aren't mixed up with flags that are stored for reuse.
These functions are very specific to the mode.
More modes can support snap, and there is no reason to keep all
callbacks for each mode in the transform_snap.c file.
This makes any operation (including mere bone selection) several times
faster on some complex production character, since we typically now only
need to diff a single ID, instead of tens of them.
We decided to use our own map data structure in general for better
readability and performance.
Reviewers: sergey
Differential Revision: https://developer.blender.org/D7987
By using own path construction instead of handy printf-like functions,
we get a 10% improvement on overall diffing process!
This remains way to slow on some complex production characters, but
always good to have still.
This way "New Collection" is always assigned the same shortcut (N).
Whereas previously it would be automatically assigned the leftover key
from the list of available collections.
Nice side effect is that since N is next to M in most keyboard layouts,
moving to a new collection is super fast by hitting M then N.
{F8630575, size=full}
Paper-cut pointed out by DerekWatts on [devtalk](https://devtalk.blender.org/t/blender-ui-paper-cuts/2596/4211) (thanks!):
{F8630492, size=full}
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D8067
Use a median center of polygons as an initial value for volume center
calculation since the volume accumulation quickly generates very large
numbers that become inaccurate if the geometry is too far
from it's current center.
This seems to be an error in rBb91b90f0dd3c9bff3b1a6e563c2cce293722ed16.
I found it, because I could not open the file in T77263 anymore.
Reviewers: sebbas
Differential Revision: https://developer.blender.org/D8065
The matrix interpolation function `interp_m3_m3m3()` decomposes the
matrices into rotation and scale matrices, converts the rotation
matrices to quaternions, SLERPs the quaternions, and converts the result
back to a matrix. Since quaternions cannot represent axis flips, this
results in interpolation problems like described in T77154.
Our interpolation function is based on "Matrix Animation and Polar
Decomposition", by Ken Shoemake & Tom Duff. The paper states that it
produces invalid results when there is an axis flip in the rotation
matrix (or negative determinant, or negative scale, those all indicate
the same thing). Their solution is to multiply the rotation matrix with
`-I`, where `I` is the identity matrix. This is the same as element-wise
multiplication with `-1.0f`. My proposed solution is to not only do that
with the rotation matrix `R`, but also with the scale matrix `S`. This
ensures that the decomposition of `A = R * S` remains valid, while also
making it possible to conver the rotation component to a quaternion.
There is still an issue when interpolating between matrices with
different determinant. As the determinant represents the change in
volume when that matrix is applied to an object, interpolating between a
negative and a positive matrix will have to go through a zero
determinant. In this case the volume collapses to zero. I don't see this
as a big issue, though, as without this patch Blender would also produce
invalid results anyway.
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D8048
The interpolation of 4x4 and 3x3 matrices will fail when the rotation
component has a singularity, i.e. when there is one axis mirrored. Two
mirrored axes are just a rotation of 180 degrees around the third, and
three mirrored axes are such a rotation + a single axis mirror. To
prepare for a fix, I first wanted to cover the basic functionality with
a few unit tests.
These tests check that `interpolate(A, B, alpha)` always returns `A` for
`alpha=0`, always return `B` for `alpha=1`, and something in between for
`alpha=0.5`.
These changes aren't aligned with other timeline selection keymaps
(graph & action for e.g.).
Revert these changes, shortcuts to time-line editors
should take other similar spaces into account.
When "Relative Remap" option was added, the intention was only to remap
paths that were already relative. However it remapped all paths.
This was reported as T62612 and fixed recently,
however some Python script authors depended on the old behavior.
For users, it's reasonable to use the existing operators to make paths
absolute/relative. For scripts however it's useful to be able to write
out individual data-blocks with the ability to make all paths relative.
Now `bpy.data.libraries.write()` takes a path_remap argument which can
be `NONE/RELATIVE/RELATIVE_ALL/ABSOLUTE` allowing the script author to
choose how paths are handled when writing out data-blocks.
Addresses T77768.
Remove goto statement from `seq_render_image_strip()` and `seq_render_movie_strip()`.
`seq_render_image_strip_view()` and `seq_render_movie_strip_view()` is used to render individual views in both monoview and multiview branch.
I have included `seq_can_use_proxy()` for convinience
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D7870
This operator is written in python it is inserting keyframes to create fade
effects.
Add Sequence.invalidate() python function to invalidate strip if it is
changed in python.
Perhaps I could implement cache invalidation to actual curve manipulation.
I guess it wouldn't be very hard to do but having means to invalidate form
python is useful as well.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7885
Partialy fixes T73828
Currently all 3 effect inputs were assigned even if not all 3 were used.
This causes problems with reassigning effects in python, because 3rd input is
not accessible.
This patch will only assign inputs that are necessary for effect to work
properly.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D6868
Effect strips bound recalculation was mixed with overlap handling, which
caused, that effects wasn't handled.
In some cases there may be problem with order of strips in seqbase. We should
traverse hierarchy instead. This is design issue that applies to all
operators, and should be fixed separately.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7880
This commit changes the behavior of 4 snapping combinations:
**1. While constraining to a plane, snap to an edge element:**
The snap is made at the intersection between the edge direction and the
constraint plane.
**2. While constraining to a plane, snap to a face element:**
The snap is made to the nearest point between the snap point and the
line that intersects the face plane with the constraint plane.
**3. While constraining to an axis, snap to an edge/line element:**
The snap is made to the nearest point on the axis to the edge/line.
**4. While constraining to an axis, snap to a face element:**
The snap is made at the intersection of the axis and the plane defined
by the face.
To avoid unpredictable jumps outside view boundaries, an alignment
check is made for each of these snapping combinations.
Resolve/fix T66422
Differential Revision: https://developer.blender.org/D5608
Previous commits to fix parent selection introduced incorrect behavior
when selecting objects linked to multiple collections. The clicked
object would be selected, but also the first listed object in the tree
would be selected.
Instead of always searching for a parent object to select, only search
back when the selected element is not an ID_OB. This prevents multiple
selection of objects linked to multiple collections.
This values was not working because was removed by error in refactor.
Reviewed By: mendio, fclem
Differential Revision: https://developer.blender.org/D8061
This allows the operator's shortcut to appear in the context menu.
Except for the shortcut display, there is no functional change from the
user's point of view.
This fix T77839
This commit adds a new model to the Sky Texture node, which is based on a
method by Nishita et al. and works by basically simulating volumetric
scattering in the atmosphere.
By making some approximations (such as only considering single scattering),
we get a fairly simple and fast simulation code that takes into account
Rayleigh and Mie scattering as well as Ozone absorption.
This code is used to precompute a 512x128 texture which is then looked up
during render time, and is fast enough to allow real-time tweaking in the
viewport.
Due to the nature of the simulation, it exposes several parameters that
allow for lots of flexibility in choosing the look and matching real-world
conditions (such as Air/Dust/Ozone density and altitude).
Additionally, the same volumetric approach can be used to compute absorption
of the direct sunlight, so the model also supports adding direct sunlight.
This makes it significantly easier to set up Sun+Sky illumination where
the direction, intensity and color of the sun actually matches the sky.
In order to support properly sampling the direct sun component, the commit
also adds logic for sampling a specific area to the kernel light sampling
code. This is combined with portal and background map sampling using MIS.
This sampling logic works for the common case of having one Sky texture
going into the Background shader, but if a custom input to the Vector
node is used or if there are multiple Sky textures, it falls back to using
only background map sampling (while automatically setting the resolution to
4096x2048 if auto resolution is used).
More infos and preview can be found here:
https://docs.google.com/document/d/1gQta0ygFWXTrl5Pmvl_nZRgUw0mWg0FJeRuNKS36m08/view
Underlying model, implementation and documentation by Marco (@nacioss).
Improvements, cleanup and sun sampling by @lukasstockner.
Differential Revision: https://developer.blender.org/D7896
This makes a few changes to the modifier panel header:
1. Adds "move to top" and "move to bottom" buttons.
2. Adds a checkmark icon for "apply"
3. Makes it narrower, the text is closer to the dropdown icon.
(Requires the change in ui_block_func_POPUP)
Differential Revision: https://developer.blender.org/D8040
This includes a few improvments:
1. Always expose delete. This is the button everyone wants the most,
it makes a lot of sense to expose this.
2. Improve "name hiding capability." Basically always align the mode
buttons to the right, and count their number to see if the name fits.
3. Aligns more items, to look better, save space, and make the whole
header seem more grouped.
4. In my tests the "switch contexts" button never coincides with the
delete button, so they share the same space.
Differential Revision: https://developer.blender.org/D8037
If the panel is already open and you ctrl click on its header, its
sub-panels are now expanded / collapsed instead of toggling the
expansion for all other panels. If you're toggling a panel's expansion
it's already in view anyway, so there is no need to collapse the
other panels.
Differential Revision: https://developer.blender.org/D8042
When picking a small tile size when doing a CLI render will
yield many status updates being printed to the console
causing a slowdown in the render process. 2.79 with the
same amount of tiles did not have this slowdown.
The reason for this turned out to be a debugging aid added
in rBd2757d149bf2 which disabled buffering for stdout which
on windows caused every single character being printed to the
console to try to obtain a mutex, and worse the thread being
put to sleep when this mutex was unavailable leading to poor
performance.
This patch changes the behaviour by only disabling the
buffering in debug builds.
CLI render of the default cube with 16x16 tiles at 1080p
2.83 : 37.57s
now : 17.03s
note: this only affected CLI renders, renders from the UI
do not report this kind of information and had no such
slowdown.
Now that we have a uniform consistent behavior in all our ID duplicate
funtions, we can easily factorize it greatly. Code gets cleaner,
smaller, and less error-prone.
Note that ultimately, this duplicate/deep copy behavior could be added
as a callback of IDTypeInfo.
We could also rethink the duplicate flags (some data, even some obdata,
like Lattice, are not coverred currently).
And so on. But at least code should now be much more easily maintainable
and extendable.
Previously, object (and sub-data) actions would be controlled by the
user preferences flag, collections actions would never be duplicted, and
scenes actions were always duplicated...
Now they all follow the user preferences settings.
Main change from user side, besides that all pointers should now be
properly remapped to new IDs, is that linked objects are no longer
preserved when doing a full copy of scenes.
Will open a task to check whether we actually still want that behavior
(and re-code it in a more correct way then).
This is the main part of work done here, it aims at uniformizing and
sanitizing that 'deep copy' process for supported IDs (currently scenes,
collections and objects).
Note that there will be more follow up commits after that one, but this
should be the most risky and changing one.
This resolves T73673 by allowing delete hierarchy in all outliner view
modes. It also unifies the collection and object hierarchy delete into a
single operator like in rBae98a033c856. This makes it easier to delete
all selected collection and object hierarchies at once.
This also removes the old object delete hierarchy code in favor of the
batch delete code which has been default for over a year.
Maniphest Tasks: T73673
Differential Revision: https://developer.blender.org/D7675
Change how the radius, changing the size of meta plane, sphere & cube.
Previously the size of these primitives would be kept the same,
with only the radius outside the primitive being scaled.
This led to small scale adding a lot of polygons instead
of scaling the primitive down as users would expect.
Also change behavior not to change the resolution when adding
to an existing meta-ball.
Adding volume obdata option to `eDupli_ID_Flags` enum made it go beyond
the 16 bits of a short... Also, enums should typically be stored in
unsigned integers.
Using enum type itself in implementations, and uint in headers (as using
enums types in headers is a pain when enum are not defined and used in a
single same header file...).
It makes no sense to deep-copy a collection and not also copy its
children collections... Parameter was not used anymore anyway.
So now this duplicate function will always at least deep-duplicate all
of its children collections, recursively.
We want to get rid of those for all ID types ultimately, but that one
was only used in one place, being the only one calling
`BKE_collection_duplicate` without hierarchical duplicate and parent
collection pointer, effectively using the full power of the complex deep
duplication code for a mere `BKE_id_copy` call...
This will allow for further cleanup in duplicate code.
This adds the `MultiFunction` type and some smallish utility types that it uses.
A `MultiFunction` encapsulates a function that is optimized for throughput by
always processing many elements at once.
This is an important part of the new particle system, because it allows us to
execute user generated node trees for many particles efficiently.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D8030
This patch adds two options:
- Convert a mesh to grease pencil strokes.
- Bake the mesh animation into grease pencil strokes.
Both are related and must be included in the same patch.
Related to tasks: T77629 and T77630
Notice: The conversion is done for mesh edges and it's not considering any visibility clipping. All edges are exported, no matters if it's visible or not.
Example of Convert a Mesh to Grease Pencil strokes:
{F8606028}
This conversion was inspired by the technique used by @luamono in this tweet: https://twitter.com/luamono/status/1239983662176841730
Example of Bake Animation (the video is a little outdate, but the basic functionality is the same, only small changes in UI):
{F8606032}
Reviewed By: mendio, pepeland
Maniphest Tasks: T77629, T77630
Differential Revision: https://developer.blender.org/D7983
IK degrees of freedom is rendered using wires and a solid sphere. The
solid used the wireframe drawing what resulted into drawing glitches.
This patch adds a new shader to draw the solid shape.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D8044
Is achieved by replacing hard-coded signed/unsigned file names with
"<uuid>" which acts as a "request ID". This way multiple workers can
put their requests into a single directory without collisions. The
code sign server will handle the requests sequentially in an unknown
order.
The directory layout on worker goes as following:
<Worker>
<Builder Name>
blender.git/
build/
install/
lib/
Adding an extra <Builder Name> after build is redundant.
Differential Revision: https://developer.blender.org/D8045
Some of the files were (indirectly) using dna_type_offsets.h without
adding dependency from bf_dna (which is needed to ensure the file is
generated prior to library compilation).
Now that `BKE_main_collections_parent_relations_rebuild()` is called
from readfile code, we need to make it resilient to potential NULL
master collection pointer in scenes.
This is part of a greater blenloader decentralization effort (T76372).
For modifiers the goal is that fewer files have to be modified when
a new modifier is added.
This patch just adds the `blendWrite` and `blendRead` callbacks to
`ModifierTypeInfo` but does not change any other code yet. In the next
steps, modifier specific code will be moved from `writefile.c` and
`readfile.c` into their corresponding `MOD_*` files.
Prelimenary step to fix T77460.
Not sure how or when that thing was done, but since that call walks
around collections relationships, it's an utterly critical violation of
liblinking principles (code here should never, ever 'get outside' of its
own ID scope).
This was wroking so far only because code called through this function
(`BKE_collection_parent_relations_rebuild`) was only following parents
pointers (in `BKE_collection_find_cycle()`), which would be either valid
or non-existent.
But next commit is going to change that to also check collection's
objects instancing of other collections.
Lines loose extraction cannot happen on the fly as the render data isn't
complete. This patch will do the lines loose subbuffer extraction as a
simple task and not on the fly.
This patch introduces 2 sub-types of tasks that are executed single threaded.
`EXTRACT_MESH_EXTRACT` would do the extraction using Mesh/BMesh geometry.
`EXTRACT_LINES_LOOSE` creates the `lines_loose` subbuffer from already cached
`lines` IBO.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7964
This is actually a nice issue due to too much optimization...
* Making an ID local just reuse the linked one whenever possible, instead of
actually making a copy of it.
* Therefore, the collection containing that ID is seen as unchanged, since
the pointer itself remained the same.
* But on undo step, there is no way to reuse that local object, which then
gets deleted, and linked one gets re-created - at a different address.
* Collection, however, since unchanged, is not updated at all and thus keeps
reference to the to-be-deleted local object, instead of the linked one.
* Issue gets even worse with viewlayers, this leads to the crash.
To address this, this patch adds a 'virtual' update flags that does nothing
in update case, but will ensure that the affected IDs using the one made local
are properly detected as changed across the relevant undo step.
Note that the recalc flags were chosen mostly for a logical reason, and also
because they are already properly dealt with and cleared by undo code,
so this looks like the optimal solution.
Reviewed By: brecht
Maniphest Tasks: T77774
Differential Revision: https://developer.blender.org/D8006
The underlying issue is that the loose edge extraction cannot be
threaded. This patch will extract the loose edges during initialization
of the render mesh data.
When working on this patch the mesh_render_data_update was split into
multiple functions to identify what part was failing. These functions
would also help us with debugging.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7962
The memory leak is noticeable when using custom bone shapes. When using custom
bone shapes objects could be extracted twice. Where the second extraction can
overwrite data created by the first extraction what causes the memory leak.
Options that have been checked:
1. Use two task graphs phases. One for normal extraction (DST.task_graph) and
the other one will handle extractions that require blocking threads.
2. Keep a list of all objects that needs extraction and only start extraction
when all objects have been populated.
The second would slow performance as the extraction only happens when all
objects have been populated. In the future we might want to go for the second
option when we have the capability to render multiple viewports with a single
populate. As this design isn't clear this patch will implement the first
option.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7969
This is a pretty quick fix; the solution is just removing all the
instanced panels whena panel is unregistered. This also necessitates
adding the option to call UI_panels_free_instanced with NULL context.
Differential Revision: https://developer.blender.org/D7977
Draw the text with the "header text highlight" theme color, which is
rarely used, making it a good candidate for this special case.
Differential Revision: https://developer.blender.org/D7897
The old URL did have a Git commit hash in it, but apparently the server
was ignoring it and only used the `master` that was also mentioned in the
URL. As a result, every new download would get the latest version from
the `master` branch, invalidating the SHA256 checksum.
I replaced `master` with the actual commit hash. This should make the
situation stable.
No functional changes.
If selected a point for masking, the previous point that is part of the same segment was included.
This bug was in Sculpt and Vertex paint modes because the code was very similar.
Alembic is not a single file format, it can be stored in two different
ways: Ogawa and HDF5. Ogawa replaced HDF5 and is smaller and much faster
(4-25x) to read ([source](http://exocortex.com/blog/alembic_is_about_to_get_really_fast)).
As long as Blender has had Alembic support, it has never supported the
HDF5 format in any release. There is a build option `WITH_ALEMBIC_HDF5`
that can be used to enable HDF5 support in your own build. This commit
removes this build option and the code that it manages.
In the years that I have been maintainer of Blender's Alembic code, I
only remember getting a request to support HDF5 once, and that was to
support very old software that has likely since then been updated to
support Ogawa. Ubuntu and Fedora also seem to bundle Blender without
HDF5 support.
This decision was discussed on
[DevTalk](https://devtalk.blender.org/t/alembic-hdf5-support-completely-remove)
where someone also mentioned that there is a tool available that can
convert HDF5 files to the Ogawa format.
The problem was related to the change introduced in commit 11ba9eec70
As now the keyframe is only visible if the keyframe is greater or equal than current scene frame and the preview file had all keyframes in frame number 2, it was not used in frame 0 or 1.
Now, the keyframes have been moved to frame 0.
This fixes the behavior of `ctrl+F` and `shift+F` to control the angle
and strength of a brush when the unit scale is not one.
Reviewers: pablodp606
Differential Revision: https://developer.blender.org/D7992
Regression in 49f59092e7 caused all handles to display using
the 'aligned' theme color.
Arrange flags to fix this, add assert to avoid this happening again.
Also rename flag so it's use is clearer.
embree marks a few of its functions with a dll_export macro
forcibly exporting these symbols from whatever binary links
them. Given we link embree statically and we do not want these
exports in the blender binary, the macro needs to be a no-op.
This updates python to the latest patch level available for 3.7
also updates some of the packages we rely on:
idna 2.9
urllib3 1.25.9
cerifi 2020.4.5.2
requests 2.23.0
numpy 1.17.5
Previously, constraints were added multiple times from different
vertices. This adds a GSet to check that the same constraint is not
being added twice when iterating over the neighbors of two different
vertices.
Reviewed By: zeddb
Differential Revision: https://developer.blender.org/D8007
- BKE_lattice_deform_data_create was init_latt_deform.
- BKE_lattice_deform_data_destroy was end_latt_deform.
- BKE_lattice_deform_data_eval_co was calc_latt_deform.
This is an improvement over 2.7x which converted edit-mesh to mesh
(CDDM) for all 3 modifiers.
Overall this increases performance in edit-mode by around 15-20%.
Caused by the optimization of `Skip EditMesh to Mesh Conversion`.
Now that EditMesh is used when the Mesh has no modifiers, do not
skip the selected elements.
Now all overrides are handled that way. Performances of the process look
decent enough, even with production characters...
If performance issues still arise, we'll investigate other solutions.
This should also make T73154 obsolete now.
This patch makes the infamous "Cancel" error in the viewport a thing of the past. Instead it
now shows a more useful error message and streamlines the error handling process in CUDA.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8008
When a fluid is put under influence of gravity or acceleration, it
forms an internal pressure gradient, which causes observable effects
like buoyancy. Since now cloth has support for simulating pressure
changes caused by fluid compression or expansion, it makes sense to
also support the effects of gravity.
This is intended for better simulation of objects filled or
surrounded by fluids, especially when constrained by collisions
or pinned vertices, and should result in more realistic shapes.
Obviously, this doesn't actually simulate fluid dynamics; instead
it is assumed that the fluid immediately adapts to changes in the
shape or acceleration of the object without friction or turbulence,
and instantly reaches a new static equilibrium.
Differential Revision: https://developer.blender.org/D6442
This upgrade required a few changes:
- Some parts of our patch are no longer necessary, as the USD library
now includes those changes.
- The rest of the patch needed adjustment as the `pxr/base/lib/*`
directories in USD's source code have moved to `pxr/base/*`.
- Updated library names on Windows -- thanks @LazyDodo.
Note that this does not enable the USD Python API for inclusion in
Blender. It just aims at being an as-simple-as-possible version upgrade
of the USD library.
The material binding API that we used was removed in the Universal Scene
Description library version 20.02. Using this new API, the code is
compatible with both USD 19.11 and 20.02.
Smells like GCC bug [1], which is backed up by the fact that locally
GCC-10 and CLang-10 works fine.
Since the change is trivial (and, arguably, correct since there is
no real difference between tests code and actual code) seems fine to
fix.
Fix suggested by Jacques Lucke, thanks!
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=56480
Steam just released a SteamVR update with OpenXR Developer Preview
support:
https://steamcommunity.com/games/250820/announcements/detail/2396425843528787270.
Once SteamVR is set up for OpenXR (see link above), it works with
Blender "out of the box", thanks to OpenXR!
We have to apply the sRGB transform workaround for SteamVR though,
otherwise it renders way too dark. Done in the next commit.
Note that AMD users may still only see a pink screen, because the
OpenGL-DirectX compatibility fails. I will check on a fix again.
For SteamVR on Linux we may have to wait for until it supports OpenGL
rendering for OpenXR. Alternatively, we *could* add initial Vulkan
support at Ghost level and use Vulkan<->OpenGL interoperability
extensions, Monado uses these as well.
Prefer meaningful function names over redundant NULL arguments.
Also clarify variable names as it wasn't obvious the object-data
is part of the object target.
This is really doing two operation so using the ampersand makes more
sense.
Also selection sounds better than selected.
This also adjusts the name in the text Edit menu which was an issue
raised in T68738
Override collections do not support that, add proper checks in BKE code
adding objects to collections.
Also try to find a suitable collection in parents in that case.
Note that this is enforced on 'public' API level, internal code can
still bypass those checks if needed. Exposing this possibility to public
API should not be needed.
Limit support for `GLEW_ARB_base_instance` to OpenGL 4.0 and higher. NVIDIA Quadro FX 4800
(TeraScale) report that they support GLEW_ARB_base_instance, but the driver does not support
`GLEW_ARB_draw_indirect` as it has an OpenGL3 context what also matches the minimum needed
requirements.
We use `GLEW_ARB_draw_indirect` as a target for `glMapBuffer(Range)` what is part of the
OpenGL 4 API. So better disable it when we don't have an OpenGL4 context.
Note: fix should be ported to Blender 2.83 LTS
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7994
Happens when some of the color correction terms are mathematically
undefined: foe example, when pow() is to be calculated and the X
argument is negative.
There is no ground-truth result in such cases, so ignore such terms
entirely.
This is a generalization of D6696 from Jacques.
Differential Revision: https://developer.blender.org/D7966
- Remove the operator, use a generic operator instead.
- Switch between PREVIEW/SEQUENCER as the mixed state isn't as useful.
- Add menu item to make the shortcut discoverable.
- Remove unused & broken "View Type" menu.
This solves a crash when switching from the modifiers tab to an armature
object and expanding a panel. Thanks to Alexander Gavrilov for mentioning
the problem.
Matches other similar cases for collection and object, and general
naming rule (copy is for generic ID copying, duplicate is for more
involved and poweful behaviors specific to an ID type).
This greatly simplifies and unifies logic.
Also addresses T77255: full scene copy will now use same preferences
parameters as object or collection duplicate to choose which data-blocks
to copy along.
Those are then assumed already duplicated, and not touched. However, all
of ther objects and sub-collections can still be processed as with any
other regular collection...
The `Toolbar` and `Sidebar` hide the corresponding panel
`VIEW3D_PT_sculpt_dyntopo` by polling for context.sculpt_object and
context.tool_settings.sculpt. In the Active Tool in the Properties
Editor this poll does not return False though, thus the
sample_detail_size is possible from there.
Second security check (the operator poll `SCULPT_mode_poll`) checks the
active object -- that is still valid even if hidden, so we are allowed
to execute the operator. However the active object becomes NULL once the
area is switched in `sample_detail()` -- see `CTX_wm_area_set`), leading
to the crash.
Dont think there is a quick and easy way to do this in the poll from the
Properties Editor, so just check for a valid active abject in the
operator and return OPERATOR_CANCELLED if we dont have it.
Maniphest Tasks: T77047
Differential Revision: https://developer.blender.org/D7832
When closing the File Browser window after making it fullscreen, Blender would
either crash or all windows would disappear, with no obvious way to bring them
back.
The "fix" is to not allow fullscreen for File Browsers (or any future "dialog"
windows), but only maximizing. From what I can tell that's how secondary
windows are supposed to work on macOS. What we previously did seemed like
something macOS doesn't handle cleanly, and I didn't find a simple way to do so
on our side.
During normal drawing there is a rather complicated method to check
whether the panels should be animating. It's not set up to deal with
the panel expansion changing from outside the UI, which is now possible
with the panel expansion connected to the modifier's show_expanded
property.
The solution is to activate panel animation if setting the expansion
property has changed.
This commit enables basic copy of overrides on generic ID level, as well
as from (deep) copy operators for objects and collections.
So e.g. if your linked overridden caracter is in a collection, you can
now (from the outliner) Duplicate that override collection to get a new
overriding copy of the character.
We still need operators (new or modifying existing ones) to handle that
from 3DView e.g.
Note that deep copy code for objects/collections (and incidently
animdata) had to be modified to avoid duplicating/making local IDs that
remain linked ones being used by overrides ones.
The override operations generated from 'do not follow' RNA pointer
properties (i.e. pointers to other IDs) were not properly clearing their
'no more used' flag, and hence were incorrectly deleted on second save.
Custom Loop Normals are normally encoded relative to the default
normals, similar to normal maps, allowing them to naturally follow
mesh deformations. Changes to mesh topology however often result
in nonsensical effects that are not desired.
The Remove Doubles operation especially (now known as Merge By
Distance) is intended as a purely topological operation, and
definitely should not change the vector of the custom normals.
This patch implements that behavior by converting the relative
encoding into an absolute vector layer for the duration of the
operation. It also modifies other Merge types in this way for
consistency, the Rip operator as their inverse counterpart;
and also Delete, Dissolve, Connect Path and Knife operators
as other examples more related to topology than shape.
On the technical side, this ports mesh_normals_loop_custom_set
to BMesh, and then uses a temporary Custom Data layer to store
the normals as vectors for the duration of the above mentioned
operations. When the normals are converted back to custom data,
the caller can choose whether to mark edges as sharp to preserve
distinct normals, or just average them instead. All but Remove
Doubles choose to average for now.
Differential Revision: https://developer.blender.org/D4994
This is related to T76659.
This just renames data type names to `CD_PROP_STRING`, `CD_PROP_FLOAT`
and `CD_PROP_INT32`. It makes them a bit more specific and removes
unnecessary abbreviations.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D7980
We decided that `blender::Set` should be the default choice for a set
data structure in Blender.
Reviewers: sergey
Differential Revision: https://developer.blender.org/D7982
We decided that `blender::Vector` should be the default choice for
a vector data structure in Blender.
Reviewers: sergey
Differential Revision: https://developer.blender.org/D7981
Previously, this function would expect a callback function as parameter.
This behavior is now in Map.lookup_or_add_cb. The new version just
takes the key and value directly.
With this patch Cycles recognizing when a logical OptiX and CUDA device represent the same
physical GPU and attempts to eliminate unnecessary tile copies for viewport rendering if that
is the case for all active devices. In addition, denoising is now no longer performed on the first
available OptiX device only, but instead it will try to match CUDA and OptiX
rendering/denoising devices exactly to maximize utilization.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7975
Since rB329b4c3363e4 a texture preview is not rendered through the
preview.blend and a renderengine anymore [unlike materials etc.]
Alpha wasnt handled in that commit, take that into account now.
sidenote: not sure if we should be looking into drawing alpha with a
checkerboard in the background for texture previews (see texture
previews elsewhere)?
sidenote 2: might also be good to document where the "calculate" and
"invert" alpha options are still used? [looks a bit inconsistent:
compositor uses it, Image Editor as well as Render Engines dont?]
Maniphest Tasks: T77356
Differential Revision: https://developer.blender.org/D7929
clipping (even if the proportional edit itself is disabled)
Checking T_PROP_EDIT_ALL returns true for _any_ of the options, so just
check for T_PROP_EDIT.
Note: this might expand to other similar checks (e.g. header text)
Maniphest Tasks: T77068
Differential Revision: https://developer.blender.org/D7927
The was caused by 8b347fc2cd as the old BONESEL_NOSEL flag
handled the -1 case (used for none).
Instead of checking for -1, remove these elements from the array
as selection code makes decisions based on the number of hits detected.
Local datablocks (including overrides) need to have a unique name, which
can then differ from the reference linked one (especially when there are
several local overrides of a same linked data).
Issue is, ID name is a 'rna name property', and as such used as
reference when dealing with override of collections of IDs, so we cannot
have a changing name.
The solution implemented here should work and is simple, but it may have
some issues in corner cases (time will say), it is not really robust.
Alternative solution would be to store ID pointers as reference in
override operations, instead of there name. But that would potentially
add quiet a lot of overhead to foreach looping in `lib_query.c`.
This code is currently only used for the Glossy Toon BSDF, but it's a generic
building block that might be used for other things in the future.
To see why the current code does not give a uniform distribution, consider that
it chooses both angles uniformly, but the smaller the angle from the center of
the cone is, the smaller the differential solid angle is (similar to how
sampling disks by choosing radius and phi uniformly does not work).
Differential Revision: https://developer.blender.org/D7948
Also, remove manually placed decorator for vertex groups in modifiers. This was
only needed because of this bug, and the layout was slightly misaligned.
This will fix situations where the modifier epansion was set elsewhere
besides the UI, like from the python console, solving the drawing part
of T77502.
Also adds update tags to the show_expanded property, which means
the properties window redraws when the property changes.
This operator performs an edit operation in the active face set defined
by the cursor position and updates the visibility. For now, it has a
Grow and Shrink operations, similar to Select More/Less in edit mode or
to the mask filter Grow/Shrink modes. More operations can be added in
the future.
In multires, this updates the visibility of an entire face from the base
mesh at once, which makes it very convenient to edit the visible area
without manipulating the face set directly.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7367
This implements squash and stretch as a deform mode for the Pose Brush.
It is similar to scale, but it applies different scale values in different
axis. To achieve this, the pivot local space of the transform needs to
be aligned to the segment when using this deform mode to apply the scale
in the correct direction.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7934
Previously the scale of the text was using object space, so when working
with scaled objects or small meshes the size of the text was wrong. Now
it calculates a scale in screen space, so the text size should be much
more predictable
Reviewed By: sergey, Severin
Differential Revision: https://developer.blender.org/D7941
E.g. simply on button hover changes, the tree would be needlessly rebuilt.
I wouldn't be surprised if this causes side-effects, for some state changes we
may still have to do a full rebuild.
This adds two data structures that wrap a node tree. However, they work
on different abstraction levels.
`NodeTreeRef` is an immutable structure that makes working with a node
tree in C++ much more efficient and convenient. It supports various
queries efficiently, that are not easily possible using just `bNodeTree`.
`DerivedNodeTree` builds on top of `NodeTreeRef`. It contains a flattened
view on the node tree, i.e. with node groups being inlined. Every inlined
node still knows its "call stack". It supports pretty much the same queries
as `NodeTreeRef`.
Both data structures come with a dot graph exporter for debugging purposes.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D7628
In this case the draw engine isn't responsible for the selection, but
the editor is.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7955
When reproject a stroke sometimes is good to keep the copy of the original stroke to create volume effects
Related to T77639
{F8603513}
Reviewed By: mendio, pepeland
Maniphest Tasks: T77639
Differential Revision: https://developer.blender.org/D7963
50258
A regression caused by c57f65c088 as a fix of another issue.
Added an exception for camera solver as that is always pointing
to camera object.
Since this is a regression which happened in 2.83.0 this change is
a candidate to be ported to the 2.83.1.
Pointed by strict compiler warnings, but some of the reports were
actually a real bugs:
- Access uninitialized memory of td_mirror_iter.
Assuming that iterator is to point to the first element of the
data array.
- Lattice's recalc data was never called.
There is also a fix for redundant declaration of recalcData() and
missing declaration of recalcData_lattice().
This also renames `MutableArrayRef` to `MutableSpan`.
The name "Span" works better, because `std::span` will provide
similar functionality in C++20. Furthermore, a shorter, more
concise name for a common data structure is nice.
The main focus here was to improve the docs significantly. Furthermore,
I reimplemented `Set`, `Map` and `VectorSet`. They are now (usually)
faster, simpler and more customizable. I also rewrote `Stack` to make
it more efficient by avoiding unnecessary copies.
Thanks to everyone who helped with constructive feedback.
Approved by brecht and sybren.
Differential Revision: https://developer.blender.org/D7931
This change modifies the multi-device implementation to support memory distribution
across devices, to reduce the overall memory footprint of large scenes and allow scenes to
fit entirely into combined GPU memory that previously had to fall back to host memory.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7426
This adds a new `CPPType` that encapsulates information about how to handle
instances of a specific data type. This is necessary for the function evaluation
system, which will be used to evaluate most of the particle node trees.
Furthermore, this adds an `IndexMask` class which offers a surprisingly useful
abstraction over an array containing unsigned integers. It makes two assumptions
about the underlying integer array:
* The integers are in ascending order.
* There are no duplicates.
`IndexMask` will be used to "select" certain particles that will be
processed in a data-oriented way. Sometimes, operations don't have to
be applied to all particles, but only some, those that are in the indexed by
the `IndexMask`. The two limitations imposed by an `IndexMask` allow for
better performance.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D7957
The current particle state is stored in a `CustomData` instance and
the cache is stored in `PointCache`.
The current state exists on the copy-on-write copies of the simulation,
while the cache only exists in the original data block.
This patch implements a temporary trivial particle simulation that does not
use the node system yet. It is used for testing and will be replaced soon.
`PointCache` still has some limitations that need to be overcome using
separate refactorings. For example, we need to be able to store the number
of particles in the point cache. Also we need to change which attributes
are stored for a particle system more dynamically than is currently possible afaik.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D7836
now that we stick to some outdated py version, some distro (like current
debian testing) will feature several python3 dev package, but other
dependant libs like numpy are only built against current default version
of python (3.8 now in deb testing)...
In order to be able to use distro packages we need to allow using higher
versions of python, and set relevant CMake option accordingly.
This removes some fragment shader hacks and improve the support of
different repeat & filtering modes.
This fix T77453 Image texture not repeating in viewport
Previously, the first frame was displayed from frame 0, but now, the first frame is only displayed when the current frame is equal or greater than the keyframe number.
The previous system was logical when the grease pencil was not an object, but now it seems more logical to display the keyframe if the current frame is equal to or greater than the keyframe number.
Reviewed By: mendio, pepeland
Differential Revision: https://developer.blender.org/D7851
Because this controls how the amount is used in should be set first and
is more important therefor place it at the top.
This is also consistent with other areas in Blender
If a layer is used for masking, it cannot be filtered by viewlayer because the masked layer needs to have the mask layers in the draw pipeline.
This check is only done in final render.
This is a critical fix that should also be backported to 2.83.1
Fairly stupid bug in fact, code detecting changes across undo steps was
assuming that each BHEAD (a block of data in blendfiles) would not be larger
than one memory chunk... Which is the case in alsmost every situation,
besides some super-heavy geometries, and other similar things (images
would also be affected e.g.).
When removing a vertex group from a Grease Pencil object, if the vertex group is not the last one that was added, the information for the remaining groups weights gets mixed up.
Minor edit of the patch for clang format.
Differential Revision: https://developer.blender.org/D7943
Adds the ability to print text in bold or italics style, synthesized from a single base UI font.
Differential Revision: https://developer.blender.org/D7893
Reviewed by Brecht Van Lommel
These changes didn't make it through the transition to the new UI layout.
- Add "has_displacement" check
- Add "sculpt_levels" property
- Give subdivide operators the operator name so they work
This patch implements the list panel system D7490 for modifiers.
It also moves modifier drawing to a callback in ModifierTypeInfo
in line with the extensible architecture refactoring goal T75724.
This adds a PanelRegister callback and utilities for registering
panels and subpanels. It also adds the callbacks for expansion saving
and drag and drop reordering described in D7490.
These utilities, callbacks, and other common UI elements shared
between modifiers live in MOD_ui_common.c.
Because modifier buttons are now in panels, we can make use of
subpanels for organization. The UI layouts also use the single
column layout style consistently used elsewhere in Blender.
Additionally, the mode-setting buttons are aligned and ordered
consistently with the outliner.
However, the large number of UI changes in this patch may mean
that additional polishing is required in master.
Thanks to William Reynish (@billreynish) who did a fair amount of the
layout work and to Julian Eisel (@Severin) for consistent help.
Differential Revision: https://developer.blender.org/D7498
This adds a modal operator called Edge Pan, which is meant to run invisibly
while something inside a region is being dragged. This patch applies this
to dragging panels, but it can be used elsewhere too.
The speed (which is defined relative to how far the mouse is beyond the
boundary) and delay are easily adjustible. and the speed also increases
smoothly from a start value to a max to make it feel more interactive
and less robotic.
Differential Revision: https://developer.blender.org/D7465
When use the Tint tool, it was very difficult to tint the filled areas if the strokes had very few points or the area was big.
Differential Revision: https://developer.blender.org/D7936
Optimizations in rBcda15408582e8de5b405 do not guarantee anymore that
consecutive memchunks in two consecutive undo steps are actually about
the same data (and hence can share the same buffer when unchanged).
This buffer sharing can now happen without any particular order, so we
need to change the process when 'merging' two undo memfiles together.
Note that existing code was not logically correct either, even with
previous undo storage code, since it would blindly transfer ownership of
the buffer to the second memchunk, without checking whether the first
one was actually the owner of it or not (a same buffer can be shared by
matching memchunks in many consecutive memfiles/undo steps).
The select operator was getting overloaded with functionality
unrelated to selecting the strip at the mouse position.
- Don't save settings, allowing the keymap only to include
non-default options.
- Fix selecting strips overlapping the current frame
overwrite all flags.
Design Task: T76372
This part of a larger refactoring towards a more extensible architecture
in Blender: T75724
The API is defined in `BLO_read_write.h`. It adds the small data structures
`BlendWriter`, `BlendDataReader`, `BlendLibReader` and `BlendExpander`.
Those contain context about the current read/write operation. Furthermore,
it adds many functions with the prefixes `BLO_write_*`, `BLO_read_*` and
`BLO_expand_*`.
Lib linking and expanding will probably be handled by the more generic libquery
system eventually. The corresponding parts of the API can be removed then.
- ED_object_constraint_list_from_constraint was get_constraint_lb
- ED_object_constraint_list_from_context was get_active_constraints
- ED_object_constraint_active_get was get_active_constraint
- ED_object_constraint_active_set was ED_object_constraint_set_active
There is in fact no reason not to do so, RNA pointers are either to
other IDs (which is properly handled by default diffing code), or to
sub-structures that should almost always be diffed as well.
Exceptions (like backward ID pointers or strictly runtime caches and
data) are to be handled with proper 'no comparison' flag in any case.
Applying gravity to this brush does not make much sense and undo/redo
won't work correctly as it uses a different undo type.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7925
Instead of accumulating displacement for each vertex into the neighbors, accumulate the opposite displacement from each neighbor into the vertex. I think this is the same and it does not produce artifacts in Multires.
Reviewed By: sergey, brecht
Differential Revision: https://developer.blender.org/D7508
This reduce the base size of the shaderinterface from 400 to 136 bytes.
Improves memory usage and cache coherency when querying a lot of uniforms
at once.
When excluding a collection containing the active object in either
texture paint or particle edit mode, the object could not be reactivated
when the collection was re-enabled. This is because the object's mode
was left in TEXTURE_PAINT or PARTICLE_EDIT, and the activation code did
not have cases to handle these modes.
This moves the code that is run when toggling out of texture paint or
particle edit modes to functions so activation can properly toggle off
the respective interaction mode.
Mix up with imapaint.paintcursor & imapaint.paint.paint_cursor
Remove imapaint.paintcursor since it wasn't used.
Also rename paint_cursor_start_explicit() to paint_cursor_start(),
removing the existing paint_cursor_start() since it took the paint
struct from the context, a value that's known by all callers.
This caused an additional argument when exiting object modes
and many other low level functions which don't need to access context.
This simplifies fixing T77073.
between fluid types
When switching to gas, the fluids were not actually destroyed, leading to
the situation that they were then destroyed when actually switching to
liquid.
Maniphest Tasks: T77264
Differential Revision: https://developer.blender.org/D7907
Now when use selection if the selection area is inside a filled area, the stroke is selected. Before it was necessary to select the border of the stroke.
The "Max B-frames" options were misplaced. Uses the usual layout of a checkbox
together with the number button now.
Reported by Peter Fog (@tintwotin), thanks!
This use the latest GPUTexture change to use the sampler state to avoid
the pole issues instead of using GLSL hacks.
This should fix T73942: Eevee mipmaps not respecting border mode.
Note that this also fix some discrepencies between cycles and eevee (like
boxmapping + clip).
This bridge between the new sampler state support from GPUTexture and
draw material handling.
The Sampler State is just the one from the texture for now. No change in
logic.
Most of the time current (based on order) system works fine, but when you add
or rename (i.e. re-sort) some ID, every data/memchunk afterwards would be out
of sync and hence re-stored in memory (and reported as changed).
Now we are storing the ID's session_uuid in the memchunks, which allows to
actually always find the first memchunk for an already existing ID stored in
previous undo steps, and compare the right memory.
Note that current, based-on-order system is still used almost all of the time,
search in the new ghash is only performed for a few data-blocks (when needed at all).
Reviewed By: brecht
Maniphest Tasks: T60695
Differential Revision: https://developer.blender.org/D7877
Similar to the one allowing to deactivate DNA check, etc.
Will helps reduce verbosity when making many new properties overridable.
Note that pointer properties always remain non-overridable by default,
since basically only ID pointers should be.
Reviewed By: brecht
Maniphest Tasks: T77083
Differential Revision: https://developer.blender.org/D7906
Functionality here has become confusing over time,
this removes duplicate, similar functions, preferring to set the mode
instead of toggle, enter, exit.
Mode switching utility function behaved differently regarding undo,
'ED_object_mode_toggle' for example didn't skip the undo push
where 'ED_object_mode_set' did.
Some callers chose these functions based on the intended undo behavior,
even when toggling didn't make sense.
There was also ED_object_mode_generic_enter which was similar to
ED_object_mode_set, instead of the reverse of ED_object_mode_generic_exit.
Simplify object mode switching internals:
- Replace ED_object_mode_generic_enter with ED_object_mode_set.
- Remove ED_object_mode_toggle as nearly all callers needed to check
the current mode so toggling would set the mode argument correctly.
- Use ED_object_mode_set for the object mode switching operator
to simplify logic.
- Add ED_object_mode_set_ex which has an argument to disable undo,
needed when loading undo data needs to set the mode.
- Remove unused ED_object_mode_exit.
This was caused by an oversight in rB45dbc38a8b15. When the next operation
character is found the offset is shifted in the original string. The remaining
length has to be recalculated with that offset before shifting the remaining
characters to make room for the ")".
This cleanup use the recent changes in shader interface to allow querying
the binding location a texture should use.
This should aleviate all issue we have with texture state change recompiling
the shaders at drawtime.
All binds are now treated like persistent binds and will stick until a new
shading group bind a different shader. The only difference is that you can
still change it with a new subgroup or same shader shgroup.
Since unbinding can be heavy we only do it when using `--debug-gpu`.
to filling/extrude/etc]
Caused by rB6da097136cf4.
The file in the report has some parts of the curve object generate faces
[due to success in filling] and some others dont [where filling isnt
possible].
rB6da097136cf4 disabled the wires/curves drawing whenever any faces
would be generated (but the only way to see all wires was to set the
Fill Mode to None then).
So now only skip the wires/curves drawing if we are _not_ in wireframe
viewport shading and the object's viewport display options is above
'WIRE'.
This is an alternative fix to D7594 (and I think the better alternative,
thx @stevewarner suggesting this).
Maniphest Tasks: T76196
Differential Revision: https://developer.blender.org/D7874
This is a temporary solution for T77173 for the 2.83 release. D7203
provides a more long term solution for future releases.
This adds theme colors for the three report backgrounds, setting them
to the color used in 2.82. A separate commit in the addons repository
will follow for changes to the bundled themes.
Differential Revision: https://developer.blender.org/D7908
This was missing from when Face Sets were enabled in Multires, so it was
always considering that all vertices in the grids are visible. This
should also fix other unreported bugs.
Reviewed By: sergey
Maniphest Tasks: T76776
Differential Revision: https://developer.blender.org/D7809
- uiTemplateID: Straightforward, just const for the template
and the functions it calls
- uiTemplateCacheFile: Create a function in rna_ui.c because
the generated RNA callback doesn't have const context.
Differential Revision: https://developer.blender.org/D7895
This reverts commit 33ce0cb5a1.
Fix T77273: crash enabling portal lights. The optimization for background
updates can be added back later for 2.90 and 2.83.1.
Previously, the twist rotation was aligned using the stroke location.
This was causing unexpected results when rotating some Face Sets rigs.
Now the intersection with the first Face Set in the flood fill is used,
which produces much better results.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7900
The grab delta is not used in do_pose_brush_task_cb_ex, so there is no
reason to add it to SculptThreadedTaskData
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7901
When linking or overriding an instanced collection, the new collection item in
the Outliner is now un-collapsed by default.
Linking and overriding is typically used in production scenes, where
collections tend to contain many items (children, grand-children, etc.). If all
collections in that hierarchy are expanded by default, the Outliner gets
flooded with items. So users ended up manually collapsing the collections.
Part of T76555.
Reviewed by: Andy Goralczyk, Bastien Montange.
Differential Revision: https://developer.blender.org/D7626
When using the "Make Library Override" operator on instance collections, keep
the overriden collection in the parent collection of the instance empty.
Previoulsy the collection would be added to the scene collection, which was
confusing and not what users expected. It was placed there for a reason after
all.
Part of T76555.
Reviewed by: Andy Goralczyk, Bastien Montange.
Differential Revision: https://developer.blender.org/D7626
Unlink (delete if single-user) collection instance empty once an override is
added to the collection through the "Make Library Override" operator. It isn't
used as a collection instance anymore then so the emtpy is an annoying left
over that has no purpose.
Part of T76555.
Reviewed by: Andy Goralczyk, Bastien Montange.
Differential Revision: https://developer.blender.org/D7626
The documentation for the `frame_change_pre` and `frame_change_post`
handlers was really sparse, and suggested that `frame_change_pre` is
called before the frame changes. This is not the case; it's called after
the frame has changed, but before the dependency graph has been updated
for it.
No functional changes, just updated documentation.
Differential Revision: https://developer.blender.org/D7905
Reviewed by: sergey
These are the modifications:
-With DRW modification we reduce the number of passes we need to populate.
-Rename passes for consistent naming.
-Reduce complexity in code compilation
-Cleanup how renderpass accumulation passes are setup, using pass instances.
-Make sculpt mode compatible with shadows
-Make hair passes compatible with SSS
-Error shader and lookdev materials now use standalone materials.
-Support default shader (world and material) using a default nodetree internally.
-Change BLEND_CLIP to be emulated by gpu nodetree. Making less shader variations.
-Use BLI_memblock for cache memory allocation.
-Renderpasses are handled by switching a UBO ref bind.
One major hack in this patch is the use of modified pointer as ghash keys.
This rely on the assumption that the keys will never overlap because the
number of options per key will never be bigger than the pointed struct.
The use of one single nodetree to support default material is also a bit hacky
since it won't support concurent usage of this nodetree.
(see EEVEE_shader_default_surface_nodetree)
Another change is that objects with shader errors now appear solid magenta instead
of shaded magenta. This is only because of code reuse purpose but could be changed
if really needed.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7642
Found during research of {T77124}. In `build_driver_data` an identical
RNA_path is resolved twice. In stead of resolving it twice this patch
will construct the `property_exit_key` based on the resolution of
`property_entry_key`.
This change isn't noticeable for users. Just a cleanup as it isn't
needed to do the same logic twice.
Reviewed By: Sergey Sharybin
Differential Revision: https://developer.blender.org/D7872
This patch changes the BVHCache implementation. It will use
a primitive array in stead of the ListBase. The locking is also
changed from a global lock to a per cache instance lock.
The performance of `gabby.blend` available on the cloud increased from 9.7
fps to 10.5 fps.
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D7817
This patch uses a graph flow scheduler for creating all mesh batches.
On a Ryzen 1700 the framerate of Spring/020_02A.anim.blend went from 10 fps to 11.5 fps.
For each mesh where batches needs to be updated a sub-graph will be added to the task_graph.
This sub-graph starts with an extract_render_data_node. This fills/converts the required data
from Mesh.
Small extractions and extractions that can't be multi-threaded are grouped in a single
`extract_single_threaded_task_node`.
Other extractions will create a node for each loop exceeding 4096 items. these nodes are
linked to the `user_data_init_task_node`. the `user_data_init_task_node` prepares the userdata
needed for the extraction based on the data extracted from the mesh.
Note: If the `lines` and `lines_loose` are requested, the `lines_loose` sub-buffer is created
as part of the lines extraction. When the lines_loose is only requested the sub-buffer is
created from the existing `lines` buffer. It is assumed that the lines buffer is always
requested before or together with the lines_loose what is always the case (see
`DRW_batch_requested(cache->batch.loose_edges, GPU_PRIM_LINES)` in `draw_cache_impl_mesh.c`).
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7618
This remove the complexity of queriying the locations at runtime and
allows for more performance and upfront binding specifications.
The benefit of doing everything at creation time is that we can assign binding
points in a predictable order which is going to be somewhat the same for
every similar shader.
This also rewrite GPU_vertformat_from_shader to not use shaderface.
This is to keep the shaderface simple. If it becomes necessary to not query
the shader after creation (i.e: vulkan?) we could just create the vert
format in advance at compilation for PyGPU shaders.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7879
This makes it easier to track as well as allowing us to sample the same
texture with different sampling parameters (which should fix the related
T73942 in the long run).
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7831
Comment on mode switching cases that are supported,
including the issue from recent regression T77217
which is easy to miss since it's not used in the default key-map.
A new user parameter can be used to shift the shadow terminator
towards the light source. With it, one can hide some of the
artifacts that appear on coarse meshes with smooth shading.
Note that this technique is not engery conserving.
This is based on the work by the Appleseed renderer team.
Differential Revision: https://developer.blender.org/D7634
This code was made obsolete by the changes to the animation editor
scrubbing areas in D4654.
Differential Revision: https://developer.blender.org/D7898
This tool is similar to the cloth brush, but it applies the cloth
simulation deformation to the whole mesh in an uniform way. The
simulation can be controlled using the mask to pin vertices and the face
sets to define force action areas.
It uses the same solver as the cloth brush which now no longer depends
on StrokeCache.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7857
This Pose Brush origin mode simulates an FK deformation in the entire
model when clicking on the face sets, as they were controls of a fully
rigged character. Combined with the previous Face Sets modes that allow
creating IK chains, the pose brush should now be able to simulate most
of the common rigs deformations.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7839
This was returning the wrong face set in cases where the active vertex
has more than one available face set.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7858
The current name isn't very specific about what the operator does.
The operation is more about lining up the edges with the viewport
edges than centering the view.
Differential Revision: https://developer.blender.org/D7866
This applies a relatively simple solution for fixing some unintuitive
cases in unit handling.
Currently entering -1m50cm evaluates to -0.5m, and similarly 1'6"
evaulates to just half a foot. So effectively there's an implied + just
between the numbers, which is quite confusing.
This works by adding parentheses so the negative distributes to the
block of values before the next operator.
For example:
| Before | After |
| `-1m50cm + 1m -2m50cm` | `-(1m50cm) + 1m -(2m50cm)` |
| `-4m + 0.5 / -1.1` | `-(4m) + 0.5 / -(1.1)` |
| `-1'6"` | `-(1'6")` |
| `-1e-2cm` | `-(1e-2cm) ` |
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D7813
Toggling object mode to the previous wasn't working, also resolves a
case when toggling modes would cause an extra, unnecessary mode switch.
Own regression in 5159b8e1ea.
Make this consistent with meshes select side of active,
also rename "Under" to "Overlap" as this is confusing since
strips can be considered above/under each other
relative to their channels.
This patch adjusts a number of text panel elements:
- The text entry widget has become larger in order to distinguish it from the strip name.
- Wrap has been moved up under the text, since this doesn't relate to bounding box.
- Alignment X/Y has been renamed to Anchor X/Y, since this is the achor point of the text point, and not the Alignment of the text.
- Offset and Crop was completely missing from the Text strip panel, these has been added.
Reviewed By: billreynish
Differential Revision: https://developer.blender.org/D7869
Add Proxy Setup, Build and View to a menu in the Preview View menu.
Reviewed By: ISS, billreynish, pablovazquez
Differential Revision: https://developer.blender.org/D7734
Add more descriptive warnings if building proxy fails.
Prevent progressbar from showing if no valid strip is selected.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D7689
Add `UNDER` option for `left_right` property of `sequencer.select` operator.
Add Equal as shortcut for select under playhead, and move Insert Gaps to backspace + ctrl.
Add extend shortcut for left, right under options.
The function is added to Select > Playhead menu.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D7679
This feature was a hack to prevent mmb select to print the orientation from menu in pre 2.80 versions.
Removing this feature as it is no longer an issue.
This is the cluster of OIIO and friends , since they are all kinda tangled best to deal with this as a single unit
OIIO 2.1.15.0
png 1.6.37
jpeg 2.0.4
opencolorio 1.1.1
tiff 4.1.0
OSL 1.10.10
pugixml 1.10
openjpeg 2.3.1
Differential Revision: https://developer.blender.org/D7727
Reviewed by: brecht
The Sculpt brushes were not properly initialized when use 2D template or other templates.
Also, using the default template (not factory settings) could be situations where the brushes were not updated.
This problem was introduced when some versioning code was removed in order to avoid duplicated brush creation.
This was introduced in rBd7282537f016 and had the wrong struct name
specified, leading to errors in writing/saving.
Stumbled over this when testing a color layer for pointclouds.
Differential Revision: https://developer.blender.org/D7882
Please note that vertices which are in a vgroup are not affected by this
option (which means that affected vertices from 'selection' modes remain
the same). Only the weights of selected vertices get inverted.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D7811
When setting the start cap of the array modifier it does not update when
updating the start cap objects geometry.
This patch switches the property update to rna_Modifier_dependency_update,
the same as the end cap which works properly.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D7584
The file subversion is no longer used in the Python API or user interface,
and is now internal to Blender.
User interface, Python API and file I/O metadata now use more consistent
formatting for version numbers. Official releases use "2.83.0", "2.83.1",
and releases under development use "2.90.0 Alpha", "2.90.0 Beta".
Some Python add-ons may need to lower the Blender version in bl_info to
(2, 83, 0) or (2, 90, 0) if they used a subversion number higher than 0.
https://wiki.blender.org/wiki/Reference/Release_Notes/2.83/Python_API#Compatibility
This change is in preparation of LTS releases, and also brings us more
in line with semantic versioning.
Fixes T76058.
Differential Revision: https://developer.blender.org/D7748
The ListBase next/prev pointers will change everytime you add or rename
an ID, also for 'neighbors' data-blocks in the list, causing unnecessary
'changed' detection.
This info is not needed in blendfile anyway, so just NULLify it.
There is no reason to have the children enable/disable state to
influence the parent collection. Specially considering that the parent
collection itself can have objects that would be visible.
Reviewed by: dfelinto, brecht
Differential Revision: http://developer.blender.org/D7864
Properly align every involved edge when performing 'tolerant' area joins.
Differential Revision: https://developer.blender.org/D7859
Reviewed by Brecht Van Lommel
The feature where the active strip determines what strip will be the
first input in effect strips can be quite a puzzle for users.
The operator to swap the inputs is hidden in the Strip menu.
This adds the swapping to the Effect sidebar panel.
Differential Revision: https://developer.blender.org/D7849
- Rename "Scene Preview/Render" to "Scene Strip Display",
since this relates to Scene Strips.
- Move the "Scene Strip Display" down, so the view settings are on top.
Differential Revision: https://developer.blender.org/D7676
The new "heading=" option allows for a more simple way to expose the
Text strip Shadow operator.
Differential Revision: https://developer.blender.org/D7535
It was causing wrong binding for image animation: since there was no
ID node for texture at the moment of build_animdata original texture
ID was passed to the callback. This is not what is supposed to happen.
This is part of fix for T65889.
Using remove double wasn't reliable as the matrix argument
could cause vertices to be further apart than the threshold allowed for.
This happened when adding cones using the new add tool.
- Interactively adding primitives with two clicks.
- Scene orientation used for new objects.
- Depth [view-plane, axis-plane, surface]
- Origin [base, center]
- Primitive types [cube, cylinder, cone, uv-sphere, ico-sphere ]
- Settings for object types in the top-bar.
Shortcuts:
- Snapping (Ctrl).
- Constrain 1:1 aspect (Shift).
- Toggle center (Alt).
Part of T57210 design task.
This implements a generic color datalayer and its functions. Based on
D5975.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7838
This was propsed in D7059, so I applied it to the rest of the code
Reviewed By: campbellbarton, sergey
Differential Revision: https://developer.blender.org/D7480
If all vertices in the sculpt are visible create the new face set and
update the default face set. This is the same as disabling the overlay,
so it will not have the extra performance cost of rendering a colored
face set twice that gives no information.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7530
The input data to the OptiX denoiser was clamped to 0..10000 as required, but it could easily
exceed that range with a high number of samples (since the data contains the overall sum). To
fix that, divide by the number of samples first and multiply it back in after the denoiser ran.
This change makes it so vertices of edge are only stored when edge
has non-zero crease. This allows to lower memory footprint of 1.5M
faces from 78 MiB to 54 MiB in the case all creases are zero.
Meshes with crease are more hard to predict due to array-based
storage, so it all depends on index of edge with crease. Worst case
(all edges are creased) still stays at 78 MiB.
Makes it possible to set adjacent vertices after edge sharpness.
Initially it seemed like useful sanity check, but with time it
became rather a burden.
Avoid per-face pointer and allocation: store everything as continuous
arrays.
Memory footprint for 1.5M faces:
- Theoretical worst case (all vertices and edges have crease) memory
goes down from 114 MiB to 96 MiB (15% improvement).
This case is not currently achievable since Blender does not expose
vertex crease yet.
- Current real life worst case (all edges have crease) memory goes
down from 108 MiB to 90 MiB (17% improvement).
- Best case (no creases at all) memory goes down from 96 MiB to 78 MiB
(19% improvement).
While this looks trivial it already allowed to catch issues in one
of previous attempt to optimize memory usage. It will totally be
useful for an upcoming refactor of face topology storage.
Allows to perform comparison by doing linear comparison of indices.
Before cyclic match was used to deal with possibly changed winding from
OpenSubdiv side.
Speeds up comparison (and hence improves FPS), makes code more reliable
nut uses more memory.
This change makes it so topology refiner comparison will check vertices
of all existing/provided edges.
The initial claim that due to manifold nature of mesh there is no need
in "deep" edges check was wrong: some areas might only provide edges
with non-zero creases. So if crease of one edge goes changes from 1.0
to 0.0 and crease of other edge goes from 0.0 to 1.0 the old comparison
code would not have caught it.
Similar to previous change in vertex sharpness, explicitly store value
provided by the converter.
Allows to avoid rather fragile check for boundary edges.
Also allows to avoid need in constructing edge map. This lowers memory
footprint of the comparison process and avoids memory allocations
during the comparison (which is an extra benefit from the performance
point of view).
This change starts the transition of topology refiner comparison
to compare actual values given by the converter, which will not be
affected by the refinement or face winding synchronization steps.
Currently is only implemented for vertex sharpness, but will be
extended further as followup development.
Fixes T71908: Subdiv: Incorrect topology comparison, leading to poor performance
The idea is to use this explicit storage for topology comparison rather
than using base level. While this will have memory overhead it allows
to simplify comparison of such things as:
- Vertex sharpness (where base level from topology refiner will have it
refined, meaning it will be different from what application requested
for non-manifold and corner vertices).
- It will allow to simplify face-vertices comparison, where currently
O(N^2) algorithm is used due to possible difference in face winding.
- It will also allow to avoid comparison-time allocation of edge map.
Currently no functional changes, just preparing for development which
will happen next.
Previously it was enabled for debug builds, now it is to be enabled
explicitly.
The reason for this is to reduce overhead when debugging other areas
which might involve subdivision surface. When conversion is to be
debugged set this manually in the code.
Consolidate it inside of the topology refiner implementation class,
which would allow to store extra data acquired during construction
of the OpenSubdiv's object.
Only use OBJECT_GUARDED_{NEW. DELETE} for structures which are part of
public C-API (and hence can not have new/delete operators overloaded).
Could try being brave and override new/delete from under C++ ifdef.
Currently, in sculpting, weight paint and vertex paint modes every cursor
movement triggers redraw of a brush. During that redraw, native cursor is set.
Under the hood, setting the cursor causes freeing of previous cursor and
allocating a new one. In most cases, in previously mentioned modes, recreating
cursor is unnecessary since cursor stays the same.
This patch adds a check which skips cursor change if requested cursor is
already set. The check could be added in pain_cursor.c, but I felt adding it
inside WM_cursor_set function would hopefully skip more unnecessary cursor
reallocations.
Differential Revision: https://developer.blender.org/D7828
Reviewed by: Julian Eisel
This was introduced on ecc395e473.
Effectively this is reverting that commit for cases when
scene->toolsettings->sculpt is NULL. But since the facesets are only
working for sculpting this should be fine.
Generic snap gizmo to be used for different tools.
The Gizmo can be configured initially by the following properties:
- `"snap_elements_force"`, `"prev_point"`
The following properties can be read as return:
- `"location"`, `"normal"`, `"snap_elem_index"`
This property can be linked to another (tool_setting.snap_elements):
- `"snap_elements"`
And this 3 extra utilities have been added:
- `ED_gizmotypes_snap_3d_draw_util`,
- `ED_gizmotypes_snap_3d_context_get`,
- `ED_gizmotypes_snap_3d_update`.
Differential Revision: https://developer.blender.org/D7071
Add selection syncing for object add named (e.g. drag and drop from
outliner to 3D view), outliner right click (a sync when the context menu
is cancelled), and for object selection from Python.
This implements a general system to implement drag and drop, subpanels,
and UI animation for the stack UIs in Blender. There are NO functional
changes in this patch, but it makes it relatively trivial to implement
these features for stacks.
The biggest complication to using panels to implement the UI for lists
is that there can be multiple modifiers of the same type. Currently there
is an assumed 1 to 1 relationship between every panel and its type, but
there can be multiple list items of the same type, so we have to break
this relationship. The mapping between panels and their data is stored
with an index in the panel's runtime struct.
To make use the system for a list like modifiers, four components
must be added:
1. A panel type defined and registered for each list data type, with a
known mapping between list data types and panel idnames.
1. A function called by interface code to build the add the panel
layouts with the provided helper functions.
- UI_panel_list_matches_data will check if the panel list needs to
be rebuilt.
- UI_panels_free_instanced will remove the existing list panels
- UI_panel_add_instanced adds a list panel of a given type.
3. An expand flag for the list data and implementations of
get_list_data_expand_flag and set_list_data_expand_flag.
4. For reordering, the panel type's reorder callback. This is called
when the instanced panels are drag-dropped. This requires
implementing a "move to index" operator for the list data.
Reviewed By: Severin, brecht
Differential Revision: https://developer.blender.org/D7490
The grab mode was not correctly implemented, so the way it was working
was confusing for users.
- Grab delta was calculated in increments from the last stroke position, so it did not match the behavior of a grab brush. I refactored the grab delta calculation to make this change more explicit.
- Grab displacement was not calculated from the original coordinates
- Grab was using an incorrect strength
Grab is now setting the position of the affected vertices directly and
the constraints solve the rest of the cloth. I also tried to implement
an alternative version based on applying forces to move the vertices to
the grab position, but I think this is more controllable and the grab
falloff can be adjusted by tweaking the simulation falloff.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7756
When the brush size is bigger than the entire mesh, fdata.tot_co can be
0, so the pose origin will default to (0,0,0), which does not make much
sense. After this patch, the pose origin will be set to the farthest
vertex from the pose origin, which at least should be in the surface of
the mesh and in most cases in the direction the pose brush was already
detecting the origin.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7773
The implementation of this function should match the one in
SCULPT_vertex_co_get. This does not solve the issue when sculpting with
modifiers active but I think this code is wrong
Reviewed By: sergey, brecht
Differential Revision: https://developer.blender.org/D7805
* Simplify workspace API a bit
* Comment on behavior of workspace-layout relations where exposed in API
* Remove annoying getters/setters
* Avoid lookups if we can early exit
* A NULL check is removed in `direct_link_workspace()` that I don't see
a need for. Am not 100% sure though, fingers crossed.
In general these changes should improve readability and make things
easier to reason about.
Adds support for Windows Shell Links (shortcuts) to the File Browser. Extended Mac Alias usage. Better visualization of linked items.
Differential Revision: https://developer.blender.org/D7380
Reviewed by Campbell Barton
This was caused by a side-effect of our exporting code's memory
management (Alembic considers data "written" and "final" when its C++
objects go out of scope) in combination with my change in
rB65574463fa2d. I removed an "only export UVs on the first frame" clause
because it was unclear why this restriction was there. As it turns out,
it breaks the export of the 2nd and subsequent UV maps on an animated
mesh. Effectively, on every frame the Alembic library thought we want to
create a new UV map, instead of continuing to write a new frame of data
to the existing one.
This is resolved by keeping a reference to the C++ objects for the UV
maps in memory while the exporter is running.
Consider this a bandaid fix (similar to rBe2724abc22d5).
Real issue seems to be that object is still in OB_MODE_PARTICLE_EDIT
whereas it should be in OB_MODE_OBJECT after toggling 'Exclude From
ViewLayer'. So while this patch prevents the crash, it leaves the object
in a weird state (it cannot be selected for example), needs further
investigation.
Maniphest Tasks: T77074
Differential Revision: https://developer.blender.org/D7843
Now callbacks for animdata, nla strip and fcurve are in their own proper
BKE files (mimicking `foreach_id` callback of `IDTypeInfo`).
This commit also fixes some missing handling of ID pointers (text ID and
IDProperties of script fcurve modifier...).
Versioning for workspaces didn't update the map used to determine which
layout is active for a workspace in a specific window. Library code now
called the function to make a workspace active (even if it already was
active), which would also use this map to determine the active layout --
the wrong one.
Error in initial workspace integration, but only uncovered recently.
Likely through 0d8a8ce03b.
The exec method was totally wrong and also the UI panel was not logic.
Also changes to make the transformation smoother and the code more simple.
Reviewed By: lichtwerk, mendio
Maniphest Tasks: T76522
Differential Revision: https://developer.blender.org/D7741
Alternative fix for T75292 & T73579 (see b75ce05c3b), that does not
cause this crash.
The crash happened because cancelling the file browser removes its
screen (as in bScreen). Before rBb75ce05c3b0f, the file browser event
wouldn't be handled any further then. After it, it would still be passed
to other areas, while the screen pointer was dangling.
Now the event is only skipped for UI handlers.
Reviewed by: Julian Eisel
When editing a complex curve is very annoying to have all handles at a time. Also, this is a requirement for the current GSoC Edit Grease Pencil using curves.
I have seen that this improvement can be used in any other area of blender, so I have decided to publish the option in the overlay panel..
Reviewed By: fclem, #user_interface, billreynish, Severin
Differential Revision: https://developer.blender.org/D7754
Due to recent changes the face sets checkbox broke. The cause is that
{7d38f5036794} changed the responsibility of drawing and updating sculpt GPU
buffers to fix render glitches.
This patch moves the checkboxes evaluation to the overlay engine.
Due to recent changes clicks in the node editor would trigger a
depsgraph update resulting in too many redraws. This patch limits
the updates to when workbench shown in texture mode in any visible
screen.
There are still cases where too many updates are created. For example when
there are a Cycles render viewport and a Workbench texture viewport on the
same screen.
This fix is meant as a workaround. The actual fix should add a mechanism
to the depsgraph and the viewports should check if they need to be redrawn.
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D7830
Allow use of the full width of visible borders when dragging to resize areas.
Differential Revision: https://developer.blender.org/D7823
Reviewed by Brecht Van Lommel
The solution is to distribute the drawing for part to be done in 3d
(dashed lines, arc) and another part in 2d (text and caps).
Ref T72121
Reviewed By: fclem
Maniphest Tasks: T72121
Differential Revision: https://developer.blender.org/D6361
interp_weights_poly_v2 would have too large epsilon values for small
polygons. To solve this we now calculate the appropriate epsilon value
so it can gracefully handle big and small values.
To make sure there was no regression, these changes were tested with the
files in T36105, T31581. Also with a surface deform modifier test file
attached in the differential below.
Reviewed By: Brecht
Differential Revision: http://developer.blender.org/D7772
Alternative fix for T75292 & T73579 (see b75ce05c3b), that does not
cause this crash.
The crash happened because cancelling the file browser removes its
screen (as in bScreen). Before rBb75ce05c3b0f, the file browser event
wouldn't be handled any further then. After it, it would still be passed
to other areas, while the screen pointer was dangling.
Now the event is only skipped for UI handlers.
Reviewed by: Julian Eisel
Solution is actually very simple, and even makes existing code simpler:
just write all lib IDs when storing and undo step. That way we do not
have to guess which indirectly used library should be kept or not after
an undo step reading.
This is an alternative deformation brush for the Pose Brush intended
quickly change the proportions of the mesh. The regular mode scales
using the segment's origin as a pivot. The inverted mode drags the
entire segment using the grab delta.
The only difference with the regular pose brush is that it is not
compatible with IK, so the option is disabled and set to 1 segment. The
rest of the options should work as expected.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7374
clicking Image Aspect
Calculate with positive areas here and ensure stencil_dimension stays
positive.
Maniphest Tasks: T76267
Differential Revision: https://developer.blender.org/D7821
This consolidates the UI code for NDOF input settings, making all
settings accessible from the preferences. This works around an issue
where the Space Navigator's "Menu" button doesn't trigger the settings
menu in Blender.
I also took the opportunity to redo the UI layout.
Note: Separate commit for 2.83 because UI layouts features
have diverged.
Differential Revision: https://developer.blender.org/D7806
This change is yet to be followed by a more comprehensive design
proposal including:
* How to differentiate the modes apart.
* More clear definition of tools and the rules for their components (gizmo, cursor).
* Selection as a non-tool vs drag option.
This can be revisited for 2.90 with more time. For now the UI team
agrees to revert this.
--
This reverts commit 4aa703aa14.
Blender's main loop puts the main thread to sleep for 5ms if no user input was
received from the OS. We never want that to happen while the VR session is
running, which runs on the main thread too.
For simpler scenes, where the viewport already draws fast, this may have quite
some impact. E.g. in my tests, the classroom scene went from ~55 to quite
stable 90 FPS in solid mode (total render time as measured and averaged by
Windows Mixed Reality utilities). With Eevee, it only went from 41 to 47 FPS.
In complex files, there's barely a difference. E.g. less than 1 FPS increase in
a Spring file (both Solid mode and Eevee).
When the Child Of constraint is owned by a bone, before the constraint is
run the matrix is converted from world to pose space. However, setting the
inverse should also take the armature object's transform into account.
Thing is, user code should not have the responsibility to check that
libquery is valid. Such checks are only source of confusion and errors
as nobody will think about finding and updating them in some obscure
specific area of the code...
Code dealing with embedded data was pre-existing proper generic
handling of those by `BKE_library_foreach_ID_link()` - and was never
updated for scene's master collection it would seem...
Note that such fix/refactor is a bit risky at this point in the release
cycle, but on the other end previous situation was really broken. So
finger crossed. :|
Code dealing with embedded data was pre-existing proper generic
handling of those by `BKE_library_foreach_ID_link()` - and was never
updated for scene's master collection it would seem...
Note that such fix/refactor is a bit risky at this point in the release
cycle, but on the other end previous situation was really broken. So
finger crossed. :|
This resolves a performance regression in 2.8x where every edit-mode
update performed an edit-mesh to mesh conversion.
Now the conversion will be lazily initialized if/when it's required.
New BKE_mesh_wrapper_* functions abstract over mesh data access.
Currently only edit-mesh and regular meshes are supported.
In the future sub-surface meshes may be supported too.
Add TBB::flow graph scheduling to BLI_task.
Using flow graphs, a graph of nodes (tasks) and links can be defined.
Work can flow though the graph. During this process the execution of the nodes will be
scheduled among the available threads.
We are planning to use this to improve the threading in the draw manager.
The implemented API is still limited it only supports sequential flows. Joins and buffers
are not supported. We could eventually support them as part of an CPP API. These features
from uses compile time templates and are hard to make a clean C-API for this.
Reviewed By: Sergey Sharybin, Brecht van Lommel
Differential Revision: https://developer.blender.org/D7578
Lamps were not tagged with `ID_RECALC_SHADING` when they were updated
from drivers. As a result, Cycles considered the lamp as unchanged. This
is resolved by having a (seemingly non-functional) callback in a new
`LIGHT_UPDATE` depsgraph node.
This patch unconditionally adds the `LIGHT_UPDATE` node + the relation
from the lamp's PARAMETERS node.
Differential Revision: https://developer.blender.org/D7822
Reviewed by: brecht
The `BM_mesh_bm_to_me()` function copies shape keys from the BMesh to
the Mesh. However, it tries to copy the same number of shape keys as are
defined on the target mesh. Since the target mesh does not necessarily
have the same number of shape keys as the BMesh, this would crash if the
target Mesh has more.
Found while performing some tests for {D7785}.
Differential Revision: https://developer.blender.org/D7818
Reviewed by: brecht
This diff updates:
FFmpeg : 4.3.2
libogg : 1.3.4
flac : 1.3.3
vpx : 1.8.2
xvid : 1.3.7
x264 : 33f9e1474613f59392be5ab6a7e7abf60fa63622
x264 seemingly has given up on even providing snapshots
and has been updated to the latest hash available at
this time.
faad has been removed since ffmpeg has not supported
it since 2010.
While investigating T76274, I found crash scenario when playhead is near end
frame and moving a strip. It is not as easy to reproduce, about 5% success
rate, and it will be even harder after rB4066c921fbe5. Exact cause wasn't
identified yet.
I wanted to disable prefetching during modal operator execution in VSE, but
currently I don't have any signalling method in place. Checking for G.moving
seems to resolve this problem, but it doesn't adress root cause of bug.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7820
Blender's main loop puts the main thread to sleep for 5ms if no user input was
received from the OS. We never want that to happen while the VR session is
running, which runs on the main thread too.
For simpler scenes, where the viewport already draws fast, this may have quite
some impact. E.g. in my tests, the classroom scene went from ~55 to quite
stable 90 FPS in solid mode (total render time as measured and averaged by
Windows Mixed Reality utilities). With Eevee, it only went from 41 to 47 FPS.
In complex files, there's barely a difference. E.g. less than 1 FPS increase in
a Spring file (both Solid mode and Eevee).
The operators to open the Preferences, Driver Editor, or Info Log window did
not work when executed from another operator or the Python console. Should work
for all of these now.
I considered using operator properties instead, so the position could be set by
a script, with some fallback (e.g. current window center). But decided that's
not really worth the boilerplate and decreased code readability. Can still be
done if there's a need for it.
Allow setting drivers and keyframes for the bone visibility restriction
icon in the outliner. Before the button was a simple icon button, but it
is now connected to the RNA property to show the driven or keyframed
state.
Also when hiding a bone from the outliner it would be deselected, but
from the properties editor it would remain selected. This moves the
deselection to the RNA update function to ensure the bone is always
deselected.
Differential Revision: https://developer.blender.org/D7825
If the redo panel was made visible with the same size it had before
(e.g. stored in the file), the runtime region coordinates wouldn't get
set and ended up being all 0. E.g. the simplest way to cause this was
having a collapsed HUD, saving the file, re-opening it with the same
effective DPI and doing an operation so the closed HUD would appear
again.
Now the size is always recalculated if the visibility state of the HUD
changes.
We define Lossless as CRF 0 (which is usually the best quality and is
working fine with other codecs afaict), but since WebM only allows for
CRF values between 2-32 and actually has a dedicated "lossless" mode, I
suggest using that (it produces large files though, so double-checking
would be welcome).
https://trac.ffmpeg.org/wiki/Encode/VP9#LosslessVP9
Maniphest Tasks: T74443
Differential Revision: https://developer.blender.org/D7800
The in front drawing was not supported for transparent part of the armature. This patch adds a second transparent pass for drawing in
front.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7763
This feature was added when Blender used tex-face (per-face images),
but doesn't make as much sense since this was removed.
Removing this from UV edit-mode as this wasn't working in any
of the 2.8x releases, causing UV's to be visible but unselectable.
Resolves issue raised in T76958.
All textures in workbench are using linear interpolation. The fragment
shader modifies the uv coordinates to sample always in the center of a
texel. In rare conditions the GPU could sample an incorrect value due to
rounding errors making some rendering artifacts.
This patch skips the interpolation in the fragment shader to remove
these render artifacts.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7816
This bug is not really visible for user. When end frame is reached by
prefetching thread, it doesn't stop and keeps on getting images from
cache.
Add chech for this situation and simplify logic involved in suspending,
so it's easier to read.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7757
Prefetching is stopped in BKE_sequencer_cache_cleanup, but is restarted quickly.
Prefetching has negative effect on performance while rendering.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7751
When rendering another scene, caching in disabled by setting
local_context.skip_cache = true. Precondition checking for this flag was
missing in BKE_sequencer_cache_get and it wasn't first thing to check in
BKE_sequencer_cache_put.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7750
When using CTRL wheel mouse the items were selected in a different order than when opening the menu and use the wheel mouse.
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D7791
Dummy typo in own recent libquery refactor, of course that one missed
change was on a line not covered by our tests or the production file
used for validation...
This consolidates the UI code for NDOF input settings, making all
settings accessible from the preferences. This works around an issue
where the Space Navigator's "Menu" button doesn't trigger the settings
menu in Blender.
I also took the opportunity to redo the UI layout.
Differential Revision: https://developer.blender.org/D7806
The reason to have this isn't quite clear, but it looks like a vestige
of the 2.5 transition. Removing this makes dragging panels feel
much more responsive.
Thanks to Julian Eisel @Severin for the original change.
Differential Revision: https://developer.blender.org/D7803
During the refactor of the transform operations, in an attempt to
maintain previous behavior, the default orientation of the translate
and resize operations became `Global` and the rotate operation became
`View`.
Now the default is always `View`, and on redo, the translate and rotate
operations are saved as `Global`.
The gpSceneDepthTexture is using a dummy 1px texture which was generating
wrong values for uvs when sampling gpMaskTexture.
Use the max size of both since any of the 2 can use dummy texture.
E.g. when opening the File Browser from the Preferences window, it would
be the child of the main window the Preferences belong to. Now it can be
a child of the Preferences window itself.
The File Browser always stays on top of its parent window. Which avoids
some issues with OS window management, see T76418 and T72693.
Also removes a now unnecessary workaround to move the child window back
to the front after closing the file browser (opening the file browser
would move the main window and the file browser to the front).
Fixes T76418, T72693.
This check was introduced in rBc8005703f298, but does not
seem necessary anymore.
Reviewers: fclem, sebbas, brecht
Differential Revision: https://developer.blender.org/D7799
The problem was that Cycles would store a pointer to an object in
`DEGObjectIterData->templ_dupli_object`. This pointer was then accessed
when the iterator was already freed.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D7797
Caused by rB47da01a4db1d.
Above commit did not change the toolname it was setting when the brush
was actually toggled.
Maniphest Tasks: T75457
Differential Revision: https://developer.blender.org/D7792
Pressing 'E' over a number button to pick a distance was keeping
left-right arrows instead of using the eye-dropper cursor.
Workaround this by clearing the active button before setting the cursor.
This operation is using the code of the mirror modifier, so no default
is guaranteed to work in all cases. This value matches the defaults of
the mirror modifier.
Reviewed By: jbakker
Maniphest Tasks: T75977
Differential Revision: https://developer.blender.org/D7495
Previously this would be enabled when threads were used, but threads are now
basically always in use so there is no point. Further, this is only needed for
guarded allocation with --debug-memory which is not performance critical.
This was already changed for the TBB-based BLI_task_parallel_range in master.
This task local storage should always be initialized from the template, not
copied from another task which may be executing at the time the copy happens.
This may not fix any actual bug, we only use this user data for parallel reduce
and it's not clear that TBB ever calls the copy constructor for that case.
Ref T76858
Don't use the cube corner special case when the offsets are different
for the three edges involved. The generic VMesh for this situation isn't
perfect, but it's much better than a failed cube corner VMesh.
Tests pass.
Don't use the cube corner special case when the offsets are different
for the three edges involved. The generic VMesh for this situation isn't
perfect, but it's much better than a failed cube corner VMesh.
Tests pass.
For a more detailed description of the issue see the commit
message for rB497cd3d7dd6e497be484eb78a8ddb23f53b20343
This change moves fftw to a shared library and reverts the bandaid
we did for 2.83.
Unsure what it is that upsets it so much, but when linking
both sndfile and fftw dynamically, the linker gets confused
and thinks that fftw is importing sf_close from the blender
binary (which makes *NO* sense) leading to a start-up error.
Generating the import library from the .def file using the
ms lib tool creates an import library that works fine.
The issue was that the projection would be inverted.
So if you shifted 0.1 along the y axis, world_to_camera_view would act
as if you had shited it -0.1 along the y axis.
- X / Y value orders are all consistent, between handles and the keyframe.
- Values are labeled consistently, with just "Frame" and "Value"
- The more important type property that can affect the others comes first.
- The "type" property provides nice visual separation between the
handle properties.
Reviewed By: sybren, billreynish
Differential Revision: https://developer.blender.org/D7738
There are three different label styles for the three Dopesheet filter
labels:
- "Display Hidden", which uses "Display" rather than "Show" as the other
two options.
- "Show Errors", which does not use the word "only" to indicate it will
hide all the non-error channels.
- "Only Selected", so no "show" or "display" in the label at all.
This commit changes:
- Always use the word "Show", not "Display".
- Always use the word "Only" when enabling the filter hides everything
else.
Reviewed By: billreynish
Differential Revision: https://developer.blender.org/D7742
When packing the image the height of the tile was checked to the width
of the packing area. This resulted that the tile was ignored.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7784
When showing UV edges after modifiers [draw_uvs_shadow], these were never
drawn anti-aliased [in contrast to the 'main' UVs].
Also: they did not respect the new 'UV Opacity' setting.
Differential Revision: https://developer.blender.org/D7764
The issue was that we used GL_ALWAYS for depth checking here which would
lead to the depth information from objects being messed up.
It would not represent which object was closest to the camera.
Reviewed By: Clément Foucault, Jeroen Bakker, Campbell Barton
Differential Revision: http://developer.blender.org/D7710
Previously the playback mode "Frame Dropping" would not drop the correct
number of frames which would lead to slow playback.
For example, the playback target is 60fps. However we can only muster
around 32 fps.
The delta frames from the last step is in this case ~1.98 or so.
With the previous code, we would floor this. That would lead us to step
forward one frame each time, effectively playing back the animation at
half the speed as we will try to render every frame.
To fix this we simply save the remaining fraction from the previous
frame and use it to compute the current frame step.
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D7694
A follow up to T67212. I missed that the rotation interpolation had its
own code path.
The previous rotation push code was actually wrong (but smooth).
Now all of the actions behave correctly and is smoothly interpolated.
When using the mask modifier loose edges could be added to the mesh.
These edges weren't marked as loose edges and wasn't picked up by other
areas of blender.
This fix recalculates the loose edges so they have the correct flag
`ME_LOOSE_EDGE`.
Reviewed By: Sybren Stüvel
Differential Revision: https://developer.blender.org/D7766
Having USD disabled by default was an oversight, and could have been
corrected earlier. It's already enabled by default in the
`blender_release.cmake` and `blender_full.cmake`.
From what I can see, there are two issues at play in {T76689} and its merged-in report {T76590}:
- In Blender ≤ 2.79 the bone layer dots were updated in the draw code. This ensured the info was up to date before drawing. This is no longer possible, as the drawing code uses evaluated objects, and those should not be written to. This has been addressed in rB709f126e8143 by calling the update function explicitly in various places in the code. The problem is that this wasn't added to all necessary spots.
- When in edit mode, changes are made to the edit bones but not to the 'actual' bones (this is synced when exiting edit mode). This causes undo to mess up the layer indicators.
I think both issues can be addressed by having the dependency graph update the used layer info as part of the armature evaluation. This will make the undo system work properly, and allows the removal of some `BKE_armature_refresh_layer_used()` from various places.
There is still the issue that there are two functions (`BKE_armature_refresh_layer_used()` and `ED_armature_edit_refresh_layer_used()`) that are both responsible for updating `bArmature::layer_used`. This is a trickier thing to solve, though, as the definition of the `EditBone` struct resides in the armature editor module. This means that blenkernel can't iterate over edit bones, but on the other hand the dependency graph shouldn't call any editor functions either. This is why I left the `ED_armature_edit_refresh_layer_used()` calls untouched.
The downside of recalculating `layer_used` from the dependency graph (at least in the way that I did it now) is that it is called every time a user moves a bone in pose mode. This frequency of updates is not necessary.
Differential Revision: https://developer.blender.org/D7709
Current implementation would update the nodetree of the freestyle scene not the composite scene.
Reviewed By: Dalai Felinto
Differential Revision: https://developer.blender.org/D7770
Side by side and top down views were rendered using an unset matrix.
This fix will reset the matrix just before copying the views to the
screen.
Reviewed By: Clément Foucault, Dalai Felinto
Differential Revision: https://developer.blender.org/D7777
The interpolation function of the datalayer was misssing so the sculpt
mask data was corrupted every time a subdivision surface modifier was
applied.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7640
Without this value defined it was reusing the same 1.0 value after using
fill mask, so it was not working.
Reviewed By: jbakker
Maniphest Tasks: T76397
Differential Revision: https://developer.blender.org/D7699
This is not as much a fix as a work around, but given the real
involves replacing how we build fftw, it is not eligible for 2.83
which is in BCON3 already.
The root of the issue lies with (how we build) fftw3
The first issue is: fftw does not build with MSVC, there are other
dependencies that are not compatible with MSVC and for those we
build the libraries required with mingw64, same for fftw
The second issue is: for reasons unknown we really really really
liked all deps to link statically so wherever possible we did so.
Now during the building of the fftw it linked a few symbols from
libgcc (which we do not ship) like __chkstk_ms, for which we passed
some flags to stop generating calls to it. Problem solved! There
is no way this could possibly turn around and bite us in the rear.
fast forward to today mystery crashes that look like a race condition.
What is happening is, we tell the linker that each thread will require
a 2-megabyte stack, now if every thread immediately allocated 2 megs,
that be 'rough' on the memory usage. So, what happens is (for all apps
not just blender), 2 megs are reserved but not backed by any real memory
and the first page is allocated for use by the stack, now as the stack
grows, it will eventually grow out of that first page, and end up in
an area that has not been allocated yet, to deal with that the allocated
page is followed by a guard page, someone touches the guard page it's
time to grow the stack!
Meanwhile in FFTW is it's doing substantial allocation using alloca
(up to 64 kb) on the stack, jumping over the guard page, and ending
up in reserved but not yet committed memory, causing an access violation.
Now if you think, that doesn't sound right! something should have
protected us from that! You are correct! That thing was __chkstk_ms
which we disabled.
Given we do not want a dependency on libgcc while building with MSVC
the proper solution is to build fftw as a shared library which will
statically link any bits and pieces it needs, however that change
is a little bit too big to be doing in BCON3.
So as a work around, we change the size the stack grows from 8k to
68k which gives fftw a little bit more wiggle room to keep it out
of trouble most of the time.
Note this only sidesteps the issue, this may come up again if the
conditions are just right, and a proper solution will need to be
implemented for 2.90.
When the number of triangles in a node became zero, the wireframe batch was
not freed along with the triangles batch and could still reference a freed
vertex buffer.
Ref T76858
That one was a bit more complicated, and is still only partial refactor
(ultimately we want to have a foreach_id callback in SpaceType itself I
think...).
All parts of drawing (shaders, GL mesh descriptor, material partitioner
and so on) needs to be redone for the draw manager and new OpenSubdiv
library.
Removing untested code which is doomed to be replaced to make localized
refactoring easier.
The code was trying to make winding consistent and manifold, same as
OpenSubdiv expects it to.
Unfortunately, the code was having some issues in corner cases so the
winding wasn't really correct.
Fortunately, the latter (compared to when this code was originally
written) supports orientation on OpenSubdiv side.
Removing code which is currently unused in Blender and which had
known issues. Is simple enough to bring the code from Git history
if the functionality is needed in the future.
This patch just disable the curve Normals by default.
Reviewed By: #user_interface, billreynish, Severin
Differential Revision: https://developer.blender.org/D7755
The previous naming scheme for the "selected to active" baking options
lead to confusion and they were not describing what they actually did.
To remedy this, I've added a new settings that does what the older setting implied it did.
Reviewed By: Brecht, Dalai, Andy Davies
Differential Revision: http://developer.blender.org/D7733
Bug was actually in outliner code, paste operator would not generate any
undo step...
This was not correct ever, but with new undo code this has become a
critical issue, it cannot survive a situation where current main data
has been changed without a proper undo push.
This illustrates again how much of a catastrophic mess the 'tools'
callbacks of the outliner are currently, it has already caused us quiet
some pain in the past, and will keep doing so until this is fully
sanitized am afraid.
Would strongly suggest getting rid of thosw nasty mix of custom
callbacks requiring manual undo pushes, I do not see the added value of
this compared to regular menus calling regular operators. It only adds
confusion and extra code for nothing...
Also put glDisable(GL_DITHER) in it since we don't even use it (but is
enabled by default).
Also leave GL_MULTISAMPLE on by default since it has no impact on non-MSAA
framebuffers.
It is not impossible that the number of knots is stored wrong in the
file (for example, it will be 1 knot only).
This change fixes bad memory allocation and bad memory access in such
cases. It also fixes strict compiler warning which was mentioning that
the allocation size is wrong),
There isn't really the correct way of dealing with such situation, so
simply fall back to Blender's knots calculation.
Differential Revision: https://developer.blender.org/D7765
Simple solution: remove the code which was causing bad threading
conflicts.
This code was a part of workaround for a specific state of linked
scene. It seems to be not needed anymore, since the pose is ensured
to be up to date by the following call stack:
- Dependency graph update,
- Copy-=on-write operation called on object.
- object_copy_data().
- BKE_pose_rebuild().
The workaround was a no-functional change for the dependency graph
anyway, because it was modifying original objects, not the ones
which are evaluated.
For some reason was only visible with gcc-10 in release builds.
Kind of makes sense since there is no CMake code which removes strict
compiler flag, so deal with strict flags in the code itself.
The RNA name property of pose bones did not have any update logic defined.
Same issue also applied to the channel name in animation editors.
Duplicated the update logic from (edit-)bones now, other pose bone functions do
this too...
A parenthesized type followed by an initializer list is a non-standard explicit type conversion syntax.
Removing the cast seems fine for both MSVC and GCC
Enabling "Use High Quality Display" in the graph editor enables
AA for the curves, this enables it for bezier handles too.
Differential Revision: https://developer.blender.org/D7740
There should be no user visible change from this, except that tile size
now affects performance. The goal here is to simplify bake denoising in
D3099, letting it reuse more denoising tiles and pass code.
A lot of code is now shared with regular rendering, with the two main
differences being that we read some render result passes from the bake API
when starting to render a tile, and call the bake kernel instead of the
path trace kernel.
With this kind of design where Cycles asks for tiles from the bake API,
it should eventually be easier to reduce memory usage, show tiles as
they are baked, or bake multiple passes at once, though there's still
quite some work needed for that.
Reviewers: #cycles
Subscribers: monio, wmatyjewicz, lukasstockner97, michaelknubben
Differential Revision: https://developer.blender.org/D3108
Issue is that update functions defined in
`rna_def_fmodifier_envelope_ctrl` (namely `rna_FModifier_update`) are
actually never called.
This is because UI code for FCurve modifiers often does not use RNA
buttons but uses custom update functions (or non at all). For example,
rB9a88bd55903a did this for the generators, envelope control points did
not have this at all.
This is now changed to use RNA buttons for the envelope control points,
this could done for other non-RNA buttons as well to get rid of
'validate_fmodifier_cb()'.
Maniphest Tasks: T76734
Differential Revision: https://developer.blender.org/D7732
settings
Stabilized ImBuf just needs to use the same colorspace and alpha
settings as the original one.
Maniphest Tasks: T76698
Differential Revision: https://developer.blender.org/D7713
This patch fixes T76277 by removing the incorrect cast from
`ptr->data` to `bNode`. The address of `ptr->owner_id` and
`ptr->data` both point to the node tree. Passing the node tree
incorrectly as a node into the `ED_node_tag_update_nodetree`
corrupts the data, because it attempts to set flags on the
node.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7747
Among other things, they were missing library pointer, session uuid
initialization, etc.
Fix T74546: Corrupted nodegroups crash blender when copy pasting or
appending them.
Fix (unreported) asserts when undoing some production scenes (from
coffee run e.g.).
Initialy caused by rB0aac74f18f2d.
Adds an Correction to properly handle possibility of overflow of path name.
Differential Revision: https://developer.blender.org/D7739
Reviewed by Brecht Van Lommel
This error was introduced wit the change in commit https://developer.blender.org/rB6a850f3cc840
As the brushes were not created, all modes except Edit were broken.
Now, the brushes and palette are not created when load the file in versioning code, but when the mode is enabled.
Also, if the brush already exist, the parameters are not reset as it was done in the versioning code in order to keep user settings.
The same logic is used for the default palette.
Caused by rB5593efec01c2.
Use first texture if we dont have an ImageUser (instead of multiview
one). Same fix as in rB9ace7e243978 / T74925.
Maniphest Tasks: T76755
Differential Revision: https://developer.blender.org/D7743
Don't use linear array with frame as an index since it has the
following disadvantages:
- Requires every application to take care of frame remapping, which
could be way more annoying than it sounds.
- Inefficient from memory point of view when solving part of a footage
which is closer to the end of frame range.
Using map technically is slower from performance point of view, but
could not feel any difference as the actual computation is way more
complex than access of camera on individual frames.
Solves crash aspect of T72009
Right now:
- drag-drop in the Outliner prevents dropping inside linked collections
- drag-drop in the Outliner allows dropping inside overridden
collections (should not be the case)
- `Object Properties` > `Collections` panel allows to add to overridden
collection (should not be the case)
- `Object Properties` > `Collections` panel filters out non-local
collections (so adding to linked collections is forbidden)
- `bpy collection.objects.link()` allows to add to linked collections
(should not be the case)
- `bpy collection.objects.link()` allows to add to overridden
collections (should not be the case)
While this might be supported in the future for overriden collections,
these cases should not be allowed atm. since objects get lost on file
reload.
Note: for the case of the `Object Properties` > `Collections` panel,
this could be improved further to filter out overridden collections as
well.
Reviewers: mont29, brecht
Subscribers:
When auto-smooth enabled, but no custom normals layer present, the Alembic
exporter would incorrectly assume the mesh was shaded smooth. This is now
corrected, and normals are always written when auto-smooth is enabled.
Since the timeline is a variation of the dopesheet, it also respects
some of the dopesheet settings.
The "Selected Only" setting is overridden from a scene property (since
rB4904eadc0f38) and the "Display Hidden" dopesheet setting seems to be
ignored.
This commit adds the remaining "Show Errors" setting to the menu,
allowing it to be updated from the timeline.
Missing proper tagging of 'backward' pointer from fcurve to its group in
RNA would lead to infinite loop...
Issue was triggered by override, but crash could be generated from other
places as well (like from py console), on any action actually...
This removes grease pencil brush creation/dat-block delete on load,
since this causes duplicate data-blocks.
Add assert to prevent this happening in the future
since the error is isn't obvious.
Since the sampling and evaluation functions handle both cases anyways,
there's not really a point for keeping the distinction in the kernel,
so we might as well cut down the number of CLOSURE_BSDF_MICROFACETs a bit.
Differential Revision: https://developer.blender.org/D7736
The issue was the custom loop normal data would be mangled when we
reversed the face loops.
The flip face code will now correctly flip the custom face normals so
they are not left in an undefined state.
Reviewed By: Bastien
Differential Revision: http://developer.blender.org/D7528
The previous code only handled the RGBA socket case. For vectors, we simply
use the average of the 3 compoments. This is done using a temp Vector Math
node using the dot operation.
Remove old code that added extra updates for shaders that have a dependency on
objects. The dependency graph can now tell Cycles when a material is affected by
an object transform.
This removes the smooth shading rendering from the face set overlay when
smooth shading is enabled.
Reviewed By: jbakker
Maniphest Tasks: T74906, T74622, T75331, T76530
Differential Revision: https://developer.blender.org/D7105
It didn't work correctly when there in no continuously solved camera
segment (aka there is a single isolated frame with solved camera).
Basically, don't start drawing curve segment until it's known there
is enough points for at least one segment.
On user level it seemed to be fine, but it was assert failure in
debug builds.
When projection painting a dense mesh a face can be marked
PROJ_FACE_DEGENERATE when it is too small. Degenerative faces are
handled differently and as documented can create incorrect results.
Not sure what these incorrect results are and if there could be a better
solution for handling these results.
This fix would only mark a face degenerative when all the verts are the
same.
Reviewed By: Campbell Barton
Differential Revision: https://developer.blender.org/D7662
When projection painting a dense mesh a face can be marked
PROJ_FACE_DEGENERATE when it is too small. Degenerative faces are
handled differently and as documented can create incorrect results.
Not sure what these incorrect results are and if there could be a better
solution for handling these results.
This fix would only mark a face degenerative when all the verts are the
same.
Reviewed By: Campbell Barton
Differential Revision: https://developer.blender.org/D7662
In some cases blender could freeze. When threads are blocked (waiting for other tasks completion) the scheduler can let the thread perform a different task. If this task wants a write-lock for something that was read-locked in the stack a dead lock will happen.
For task pools every task is isolated. For range tasks the inner loop will be isolated. The implementation is limited as isolation in TBB uses functors which are tricky to add to a C API. We decided to start with a simple and adapt were we need to.
During testing we came to this setup as it was reliable (we weren't able to let it freeze or crash) and didn't had noticeable performance impact.
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D7688
The issue was that we used GL_ALWAYS for depth checking here which would
lead to the depth information from objects being messed up.
It would not represent which object was closest to the camera.
Reviewed By: Clément Foucault, Jeroen Bakker, Campbell Barton
Differential Revision: http://developer.blender.org/D7710
When setting the Viewport Anti-Aliasing samples in the user preferences
to a lower sample count the anti-aliasing was not reset. This lead to
incorrect result as the accum buffer would still hold the values of the
larger sample count.
This fix resets the TAA when the sample count is changed.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7728
When using an external render engine Blender will still draw an OpenGL
depth buffer for the overlay engine to work correctly. Particle systems
were ignored, what lead to occluded hair and other artifacts.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7730
When sculpting the GPU batches are constructed with only the required data
for a single viewport. When that viewport changes shading or coloring mode (object
to vertex) batches might not hold all the needed information.
There is also a case when you have two 3d viewport one in object color
mode and the other in vertex color mode that the GPU batches were
updated without any vertex colors.
In order to fix these category of issues this patch would always
construct the full GPU batches for sculpting.
Reviewed By: Clément Foucault, Pablo Dobarro
Maniphest Tasks: T75908
Differential Revision: https://developer.blender.org/D7701
In some situations is good to have a grid visible anot beeing occulde by meshes.
By default is OFF.
Differential Revision: https://developer.blender.org/D7721
In some situations is good to have a grid visible anot beeing occulde by meshes.
By default is OFF.
Differential Revision: https://developer.blender.org/D7721
The current behavior isn't necessarily "incorrect," but it's unintuitive
and confusing. A simple fix is to apply parentinv before finishing the
operator.
However, there may still be issues when the object's parent has a parent.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7723
Fairly critical code mistake actually, since it uses malloca,
BLI_smallstack should *never* be declared inside a loop...
Also optimized handling of the `loop_weight` heapsimple, we can also
only create and use a single one for all edited objects...
Found two other operators potentially affected by same issue (split
normals, and weld edges into faces).
Overriding datablock should never have an editable name.
This also moves the check for linked/overridden datablocks above the
check for master-collection (otherwise a linked/overriden collection
could still be renamed)
Maniphest Tasks: T76711
Differential Revision: https://developer.blender.org/D7718
Parenting to a curve path animation depends on both geometry and
transform components. Conversion of mesh to curve will make it so
parent have path animation, conversion of curve to mesh makes it
so there is no more path animation. Both cases affects children
of the converted objects, and it's not possible to rely on special
case for curve parent in the dependency graph as that link will be
lost after conversion of curve to mesh.
Simplest approach is to tag object for both geometry and transform
update, which will ensure all children are at valid state after
the conversion.
For now the "Simulation" modifier only exists for point cloud objects, because
we need this for the particle system. Right now, the modifier is doing nothing.
There is a new `DEG_add_simulation_relation` function that is used
by the modifier to make sure that the simulation is evaluated before
the modifier is executed.
Reviewers: brecht, sergey
Differential Revision: https://developer.blender.org/D7549
Propagation when changing sculpt level was missing. In fact, the mask
was simply completely removed when changing sculpt level.
Subdivision worked for simple and linear subdivision, but Catmull-Clark
was giving empty results.
Fixes propagation part of T76386.
Making this work reliably on the event system side is difficult. So
instead, let the toggle icons take and swallow double-click events on
the UI handler level.
The second change in this patch seems to be only needed for touchpads.
Without it, renaming would still be triggered sometimes, because the
hovered button wasn't re-activated fast enough.
Remove resetting of ID uuid session counter, it is not really needed
anymore, and not trivial to do this properly everytime.
Thanks @brecht for investigating this.
This was returning true in edit mode, causing the crash
Reviewed By: jbakker
Maniphest Tasks: T76488
Differential Revision: https://developer.blender.org/D7645
The file attached in the report has a cloth brush saved with a particle
mass of 0.0, which causes all sort of issues in the solver. I don't know
how that brush was created, but it does not seems to be possible to do
in the current version (reset values are correct, property limits are
correct and a default brush is created in versioning_defaults). This
resets all brushes with an invalid value to 1.0.
Reviewed By: jbakker
Maniphest Tasks: T75347
Differential Revision: https://developer.blender.org/D7698
Use creases changes the limit surface, so the displacemente data is
won't be correct if this option is modified without updating the
displacement.
Reviewed By: sergey
Maniphest Tasks: T76306
Differential Revision: https://developer.blender.org/D7700
nearest_vertex_co was not reset when a new triangle was intersected by
the ray, so it was always returning the closest vertex to the real
cursor position in any triangle, which was not always the triangle under
the cursor.
Reviewed By: sergey
Maniphest Tasks: T75968
Differential Revision: https://developer.blender.org/D7485
Adds an 'About Blender' dialog to the 'App' menu to display information like branch and hash.
Differential Revision: https://developer.blender.org/D7146
Reviewed by Campbell Barton
Disable (skip) preftching scene strips if they target 3D scene.
Try to continue prefetching complete frame if disk cache images are found.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7514
ALSA and OSS are not available for the snap packages, and trying to initialize
them seems to cause some problems for other applications. Instead configure
OpenAL and SDL to use PulseAudio, and set PULSE_SERVER environment variable to
make it work.
Search for all potential library names in each directory, otherwise e.g.
libImath-2_2.a from a system directory will be preferred over libImath.a even
if we specified a directory.
If the orietation is setted as a parameter, it is best to refer
to it as a constraint orietation so that it can be reused in
successive axis presses.
This is useful to retrieve the orientation of the extrude for example.
In this case giving `CTX_wm_menu()` priority over `CTX_wm_region()` is all
that's needed and makes sense (since we want exactly the hovered button, not
some other active button in the region/menu hierarchy).
The situation with pop-ups is still tricky, see T73565. But as a first step
it's probably good to let functions be more explicit about what they want when
querying UI context. So I added a variation of a UI-context function for cases
like this.
Do not execute the operator to change the Graph Editor cursor when changing the
active frame through the scrubbing region. This is not what users expect, see
T76599.
Removes an explicit exception to not let the regular frame change operator
execute in the Graph Editor. It was needed to let the cursor operator run
instead, but the interplay between the two operators is now handled at keymap
level.
Fixes T76599.
Sculpt overlay assumed that the sculpt session was always in sculpt
mode. But the sculpt session was also used for Vertex/Weight painting.
This resulted that when a mask was defined in the sculpt mode this
resulted into render artifacts.
This patch adds a check to see if the object has a sculpt session for
OB_MODE_SCULPT.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7704
Since we re-use same addresses of IDs with newly read data, and never
remap old IDs to 'proper' 'old' ID pointers, it implies that old IDs
being deleted will have many ID pointers to new, valid data that we want
to keep.
In general anyway, code from IDTypeInfo (i.e. low-level ID management
code) should never do anything outside of its own ID scope, we cannot
guarantee that given ID is in fully valid state regarding its relations
to other data-blocks.
There is some hard-to-reproduce scenario when top level
would have masks allocated, but without masks on the sculpt
level.
Need to check proper array before accessing its elements.
The check for top-level masks is done by the caller.
In the Alembic importer, the animation of UVs and normals was
overlooked; when the mesh geometry is not animated, the entire mesh was
considered constant.
T76132 concerns both the exporting and importing of changing UVs. This
commit fixes the importing.
In the Alembic exporter, UVs were only exported on the first frame. This
is an issue, as when exporting an animated mesh the topology can change,
and then the UV coordinates of the first frame are no longer valid.
T76132 concerns both exporting and importing changing UVs. This fixes
the exporting.
Even though {T76514} is caused by invalid geometry, and thus technically
constitutes a bug in the software that created the Alembic file, I would
like Blender not to crash on importing such a file.
The error in the Alembic file consists of invalid mesh loops, where
consecutive loops refer to the same vertex. The `BKE_mesh_validate()`
can actually correct these errors, so this commit focuses on two things:
- Letting Blender survive the situation until the mesh is loaded, and
- Detecting the error so that `BKE_mesh_validate()` can be called only
when necessary. This ensures there is only a minimal impact on
performance when loading actually valid data.
Differential Revision: https://developer.blender.org/D7703
Reviewed By: JacquesLucke
Previously the playback mode "Frame Dropping" would not drop the correct
number of frames which would lead to slow playback.
For example, the playback target is 60fps. However we can only muster
around 32 fps.
The delta frames from the last step is in this case ~1.98 or so.
With the previous code, we would floor this. That would lead us to step
forward one frame each time, effectively playing back the animation at
half the speed as we will try to render every frame.
To fix this we simply save the remaining fraction from the previous
frame and use it to compute the current frame step.
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D7694
A better fix would probably be to check if the value is animated,
but I'm not sure how to do that.
Reviewers: zeddb
Differential Revision: https://developer.blender.org/D7692
The issue was the usage of the global `__main__` Python module.
When running scripts in the text editor, Blender would overwrite
the `__main__` module.
Reviewers: sebbas
Differential Revision: https://developer.blender.org/D7690
The old value (1.0) was often too large in practice. When many collection
instances are created, the large empties create a mess in the viewport.
This adds a new preference setting in `Editing -> Objects -> New Objects`
called `Instance Empty Size`.
The value will be used as display size for new empties containing a
collection instance.
Reviewers: Severin
Differential Revision: https://developer.blender.org/D7650
The problem was related of how the initial pixel to create outline was detected. Now, a limit is set for any image to keep a fillable image in all situations, not only when some strokes contain the fill.
{rB3685347b4172} introduced a conservative depth rendering for
selection. The conservative depth rendering assumed that all geometry
are triangle based. Hair is lined base.
This patch will use a normal depth shader for rendering hair.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7661
{rB3685347b4172} introduced a conservative depth rendering for
selection. The conservative depth rendering assumed that all geometry
are triangle based. Hair is lined base.
This patch will use a normal depth shader for rendering hair.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7661
Also remove draw-manager & depsgraph headers in interface_icons.c
Change this in 2.83 to prevent merge issues in master with
interface_intern.h header.
3DView
Operator relies on 3DView, poll for it.
Spotted while looking into T76522.
Reviewers: antoniov
Differential Revision: https://developer.blender.org/D7665
- no sockets on Frame nodes
- no Input sockets on Group Input nodes
- no Output sockets on Group Output nodes
Maniphest Tasks: T76538
Differential Revision: https://developer.blender.org/D7671
It was disabled in D7520 to keep the pdb's from growing out
of control however the increased link time is just not worth
it.
I'll keep an eye on the dailies and see if we have to come up
with a different solution.
This was because of the use of uninitialized buffers for TAA.
This patch is a quick fix for the issue which is a missing tagging for a
complete viewport update.
No idea why node editor remap callback was only handling scene IDs (and
not any other ntree owner)...
Note that this should be a safe fix, but it unvails a nice can of worm,
at some point we should ba able to handle all of that through libquery
only, get rid of editor's remap callbacks, and probably sanitize usages
of ID pointers by some of them, like that nodetree editor.
Current situation remains a fairly fragile mess...
If the search menu was used for a string property, and a data-block was
selected from the search, the value set would be an invalid name. The property
would get the modified UI string, not the proper data name set.
Mistake in rBd6cefef98f87.
This is more of a temporary fix to make the menu behave like before above's
commit. So the library hints this added will not be shown for string properties
anymore. This would need further changes in the UI code (see
https://developer.blender.org/P1380) but is too unsafe for 2.83 at this point.
Even if this is done, the note below still applies.
NOTE: Data-blocks should not be referenced by name only, as it's possible to
have duplicate data-block names with linking and especially with library
overriding.
Instead, pointer properties should be used, `UILayout.prop_search()` can then
properly deal with linked and overridden data-blocks.
Before, the material name was used to filter the effect of the stroke, but after the last changes in the ID code, now it's not working.
After talking with @severin, we agreed to replace the material name with a pointer. Also, this fix a design issue when the materials were linked.
Related to T76594
Differential Revision: https://developer.blender.org/D7681 with some minor changes
Also removes the 'Curve Stroke' panel that showed globally for curve
edit mode. This means the settings will not be available without the
draw tool selected.
Reviewed By: billreynish, campbellbarton
Differential Revision: https://developer.blender.org/D7652
The old value was too high. Now, the limit of pressure is 0, but anyway, the stroke will be always visible because there is a minimum thickness of 1 pixel.
Add a factor to determine the percentage affected.
This parameter is used to hide part of the stroke and to have a full control of how the points are displayed and not linked to current scene frame.
{F8526502}
{F8526511}
Reviewed By: mendio, pepeland
Differential Revision: https://developer.blender.org/D7682
This patch adds the stabilizer feature of GP to the annotations.
It has a toggle to activate it "Use Stabilizer", and two properties to control the behaviour of the smooth effect (factor and radius).
You can also use shift at start or in the air to temporaly use this feature.
{F8518283}
Differential Revision: https://developer.blender.org/D7648
Makes a set of more isolated individual functions, which should make
it more clear what's going on. Improved naming, added some comments.
Some extra cleanup is possible to get rid of generic vectors called
vec and disp.
Original code for copying strips tried to change strip name 2 times before
copying and once again after pasting.
Store structs in clipboard in unchanged state, so we can reference data after
pasting easily.
Better method would probably be storing animation data in clipboard as well,
so we can copy animated strips even between scenes.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7638
Adding recursive scenes has been disabled, but old files still can be opened.
Add check if scene will render itself.
Opening such file will produce warning on open and error on running render.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D7562
T76602 reported a crash with the exception address being 0,
this stack naturally could not be walked and no backtrace was
reported for the main thread. Which would have been helpful.
This change modifies the behaviour of the crash handler to ignore
the context record if it contains no useful information and
walk the current stack to get some information about what lead
to the crash.
The msvc linker had been warning about libcmt being dragged
in for a bit, finally tracked the issue down to the deps of
jpeg and pthreads which both ignored our cflags.
this diff changes them both to use the dynamic crt rather
than the static one so they'll be in line with all our
other libraries.
Background task pools would not restart threads if reused multiple times,
thanks to Jeroen for identifying the cause of this problem.
Differential Revision: https://developer.blender.org/D7659
Surrounding includes with an 'extern "C"' block is not necessary anymore.
Also that made it harder to add any C++ code to some headers, or include headers
that have "optional" C++ code like `MEM_guardedalloc.h`.
I tested compilation on linux and windows (and got help from @LazyDodo).
If this still breaks compilation due to some linker error, the header containing
the symbol in question is probably missing an 'extern "C"' block.
Differential Revision: https://developer.blender.org/D7653
We now want to use fairly recent TBB (2018 at least?), so distro a bit
old will not have required package anymore...
Tested with Debian, other distro "should work" (c), but tests there are
much welcome! ;)
Previous code would forec built libs to always be rebuilt when one of
their deps was using a package. While this could be useful when said
package was actually updated, this generates way too much false
positives.
Now only rebuild a built lib when we actually switch from built to
package for one of its deps.
When writing out the module information in a crashdump
we did not include what symbol file was loaded and if
that symbol file actually matches our executable.
Given the backtraces may contain invalid information
if the symbols are unmatched this is relevant to know.
This diff adds the symbol file and an indication if
unmatched symbols are used.
To detect if private of public symbols were loaded we were relying
on a strcmp with a known filename, which was not great, the symbol
api has a field we can query which should be more flexible and
reliable.
With the recent backtrace overhaul, the fact that BLI_assert calls
BLI_system_backtrace slipped somehow trough the cracks, causing
issues for debug builds.
This change allows BLI_system_backtrace to run again without having
an exception record.
Also minor improvements to the comments.
Particle systems have two names: the name of the particle system itself,
and the name of the particle system settings. The USD exporter used to
use the latter name, and now switched to the former. This is to be in
line with the Alembic exporter, as well as to give users more freedom in
the naming (the particle system can have a unique name but still share
settings from other particle systems).
The matcap flipping didn't work with the workbench engine in rendered mode because
of a missing depedency graph update. This commit tags the scene id for a dependency
graph update in `toggle_matcap_flip`.
Reviewed By: fclem, sergey
Differential Revision: https://developer.blender.org/D7657
In the situation that the viewport was set to solid/texture mode and
switch to wireframe and sculpt mode, an assert was triggered in
`workbench_cache_sculpt_populate`.
The construction of the export graph is now split into a few steps:
- Construct a `HierarchyContext` object for the to-be-exported object.
- Determine the graph index, i.e. the export-parent and the duplicator.
- Update the `HierarchyContext` object for this graph index.
This allows the upcoming new Alembic exporter to override the location of
an object in the export graph, in order to support "flattened" exports.
Aside from that, this also simply makes the code cleaner.
No functional changes.
The long-term goal is to move code out of `abc_util.{h,cc}` into either
files with better, more concrete names, or simply into the one file
where they are used.
No functional changes.
When loading a file from the Python console with load_ui=False,
the event was never freed from the queue causing the command
to continuously be executed.
Operators should almost always implement exec() so that they can work without
user event input. In this case there was no reason to have invoke() at all
since no event is needed.
The file browser exit() callback was not called. RNA get functions should never
modify data, here the area type info to be changed before the screen and area
were properly updated.
The Extrude operator, whose orientation is NORMAL, has undergone some seemingly accidental changes:
- In 2.79 if you press the same key as the axis in constraint, it changes from Normal to No Contraint -> Global -> Normal and repeat this.
- In 2.80 it changes from Normal to Local -> No Contraint -> Global -> Local and repeat this.
This committee resumes the behavior of 2.79
Part of T74960 (and hence T75724).
This commit only adds the basics helper code, and alter some internal libquery
code to use it.
Porting each IDType to the new system will be done gradually from there,
to allow better detection and handling of potential issues.
Differential Revision: https://developer.blender.org/D7598
This adds support to the Link modifiers data. This was missing.
Also I did a small cleanup using LISTBASE_FOREACH macro.
Related to T76478
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D7643
Now the brushes have several new random settings and use curves to define the effect. The curves have been moved below the parameter to keep UI standards and extra curve panels have been removed.
{F8505387}
The new curves are:
* Hue.
* Saturation.
* Value.
New option to random at stroke level instead to random at point level for the following values:
* Thickness.
* Strength.
* UV.
* Hue.
* Saturation.
* Value.
Curves have been moved below the corresponding parameter and only are displayed in properties panel. Display the curves in the popover made it unusable.
{F8505392}
Also, the Pressure random has been renamed to Radius because the old name was not clear enough.
Reviewed By: mendio, pablovazquez
Differential Revision: https://developer.blender.org/D7577
With the Oculus runtime, the VR session would freeze when taking off the HMD
and putting it back on. This was caused by the deletion of graphics resources
too early in the OpenXR state machine, at least for Oculus.
The resources will now only be freed once the session is actually destroyed.
Also fixes an issue where it wasn't possible to stop the session via the UI
when the HMD was taken off.
Reviewed By: Julian Eisel
Differential Revision: https://developer.blender.org/D7635
Recent changes assumed OpenCL 2.0 platform. This adds a check to see if
we are compiling on an OpenCL 2.0 platform.
Patch was tested on:
* AMD Radeon Pro WX 7100 with amdgpu-pro-19.50-1011208-ubuntu-18.04 drivers
* AMD Vega 64 with amdgpu-pro-20.10-1048554-ubuntu-18.04 drivers
* AMD RX 5700 with amdgpu-pro-20.10-1048554-ubuntu-18.04 drivers
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D7637
With the Oculus runtime, the VR session would freeze when taking off the HMD
and putting it back on. This was caused by the deletion of graphics resources
too early in the OpenXR state machine, at least for Oculus.
The resources will now only be freed once the session is actually destroyed.
Also fixes an issue where it wasn't possible to stop the session via the UI
when the HMD was taken off.
Reviewed By: Julian Eisel
Differential Revision: https://developer.blender.org/D7635
Got added in 1a30e52142 (and tweaked in follow-ups) but shouldn't be needed
anymore with the newer popup based quit dialog.
It prevents Blender from quitting properly in case macOS closed all Blender
windows. This may happen in some corner-cases unfortunately (e.g. T74101) which
would be nice to have addressed at some point. Until then, users shouldn't have
to force-kill Blender to shut it down if they run into this.
Caused by rBe07b245fe1f4 (new 'Select Linked' posemode op).
Above commit took CTRL+L (and this is kept for consistency with other
'Select Linked' operators).
So now keymap for poselib is:
poselib browse: ALT+L (was CTRL+L -- conflict here)
poselib add pose: SHIFT+L (same as before)
poselib remove pose: SHIFT+ALT+L (was ALT+L)
poselib rename pose: SHIFT+CTRL+L (same as before)
ref. D7542
Was flipping around the 0-1 range, now (optionally) flip around each tile.
Also added this option for BMesh bmo_mirror.
Reviewed By: campbellbarton
Maniphest Tasks: T75793
Differential Revision: https://developer.blender.org/D7460
A few tiny functions were not inlined even in some release
configurations. Added BLI_INLINE as extra compiler hint in
places that the profiler showed at hot spots when populating
geometry with hair.
This adds support to the Link modifiers data. This was missing.
Also I did a small cleanup using LISTBASE_FOREACH macro.
Related to T76478
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D7643
This patch adds different kind of shapes/styles for the line extremes while using the annotation line tool.
Current Styles: (following @mendio mockup)
- Arrow (closed arrow)
- Open Arrow
- Segment
- Square
For future it would be great to have icons, it would be more intuitive (and less space) with previews of what each end / start of line does, like the google slides one as reference:
{F8511116}
Reviewed By: #grease_pencil, antoniov, HooglyBoogly
Differential Revision: https://developer.blender.org/D7608
Without this, only actions in the top-bar were visible
which isn't very useful.
Now menus are extracted from the areas used in the active window,
unless this search is activated by the key shortcut,
in this case the current area is used.
If we parent with type `PAR_ARMATURE` (where vertexgroups are already
set up and named correctly according to the corresponding bones), we
still need an armature modifier. This just wasnt added.
In contrast to meshes [which add their armature modifier early in
`ED_object_parent_set`], grease pencil used to do this (adding the
armature modifier) in `ED_gpencil_add_armature_weights`.
Now split ED_gpencil_add_armature_weights in two:
- ED_gpencil_add_armature
- ED_gpencil_add_armature_weights (which calls ED_gpencil_add_armature)
- use ED_gpencil_add_armature for the PAR_ARMATURE case
Maniphest Tasks: T76416
Differential Revision: https://developer.blender.org/D7625
In 2.79, selecting an object would cycle past the first object
even if selection cycling wasn't in use.
Restore this behavior as it wasn't intentionally removed
and it's useful to be able to select an object behind the
current active object.
* Remove multi-processing in messages class update, was no giving much
speedup if any at all.
* Remove some debug prints.
* Make messages class pickleable.
* Filter better actual setting values from Settings class.
* Make settings pickleable.
All this will allow to use multi-processing in the i18n addon itself.
This implements the restore function for Draw Face Sets and Layer, which
don't affect coordinates or masks directly. This is needed for the
anchored and dot brush strokes.
Layer frees the current displacement and a new one is created on each
stroke sample. Draw Face Sets copies the data back from the first undo
node to the mesh datalayer.
Also fixes T75727
Reviewed By: jbakker
Maniphest Tasks: T75727
Differential Revision: https://developer.blender.org/D7442
In other menus we already gray out the shortcut string, just in the search menu
that wasn't the case.
We may also want to draw other hints like this in the future, e.g. the library
name for linked data-blocks in search menus. And then it's also nicer to have
it grayed out to separate it visually from the data-block name.
Dependancy missing while building depsgraph for particle systems.
fix: adding a relation texture->particles when texture has animation data.
Reviewed By: sergey
Maniphest Tasks: T76251
Differential Revision: https://developer.blender.org/D7573
The fix was actually missing few bits:
- Firstly, the operator itself is not to do UNDO push
- Secondly, multires sculpt/top level are not pushed to the undo
node, so undo can not happen reliably.
It should be possible to incorporate some of the work from WIP patch
for propagation undo, but it needs more work.
Reverting code base to the previous state, since currently things
are actually a bit more confusing then they used to be.
This reverts commit 0c928087a3.
Ever since debug symbols were added for release builds the linker
has been on the chatty side about symbols being missing for our
binary libs.
There's currently no plans to supply those, so best for the linker
not to warn us about them.
Unfortunately there is no `EXPECT_NOT_LT`; as the `HierarchyContext` only
has an `operator<()` function, testing for `(A < B) == false` is different
than simply testing `(A >= B)`.
No functional changes.
We set the default buffer size for strict buffers to 0. This increased
the performance on intel but reduced the performance on old AMD cards.
This patch sets back the default buffer size for strict buffers. After
testing I didn't detect a slow-down anymore.
Note that today new firmwares were pushed to the device what might fix
some issues.
Every code path through the `fcurve_eval_keyframes_interpolate()` function
has a valid `return` statement, but in debug mode GCC still doesn't like it.
The current clay strips brush has a huge dynamic range which is nice for
certain effects, but in some pen tablets it is quite hard to control on
the higher values and it ends up producing unwanted artifacts. This
changes the input curves a bit in an attempt to make it more
controllable.
After adding a brush management system I will expose all these values to
be configurable per brush (the round version of clay strips is a little
bit better with different curves, but that is something that we can't
support now), but for now this default are probably safer.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7524
This fixes an issue where an animated modifier property that's used as
variable in a driver wouldn't animate that driver's value.
Building the relations for the driver target creates the relation
`PARAMETERS_EVAL` → `DRIVER(variable)`. Building the relations for the
FCurve targeting the modifier property creates the relation
`ANIMATION_EXIT` → `GEOMETRY_EVAL_INIT`.
This means that there is NOT a relation `ANIMATION_EXIT` →
`PARAMETERS_EVAL`, and as a result, the driver is not properly updated
when its variable reads animated data. This is resolved in this commit
by adding the missing relation.
Differential Revision: https://developer.blender.org/D7615
While the name "Simulate" might be more accurate, there is
a naming collision with the new modifier added in D7549.
Therefore, we decided to rename the category for now.
Static tbb has always been frowned upon [1] sofar it has worked for us but
given our reliance on tbb is about to increase (D7475), I'd like to move the library
to more supported configuration. Which means moving it to be a dynamic library
The libs part of this change is in rBL62416
Reviewed By: Brecht
Differential Revision: https://developer.blender.org/D7570
Using BLI calls in this file triggered a condition where
poorly modelled dependencies in cmake (ie bf_blenlib using
zlib headers but not linking the libraries) leading to
linker error in debug builds of some of the tests.
This diff sidesteps the dependencies issue by using native
calls rather than BLI calls to check if a file exists and
what its size is. Effectively sweeping the issue right back
under the rug where I found it.
The best solution would be to audit all libraries and ensure
they have proper link requirements set, but that requires
significantly more time than I have available right now.
(zlib in blenlib was one of them and would have been easy
to fix, but there were others that required more work)
The alternative is tests that fail to build which worse.
I'll revisit this and fix it properly but for now this will
have to do.
- Changing API for time values from float to double for better precision.
- Fixing minor mistakes in the documentation.
- Fixing minor unnecessary large memory allocation.
- glyph_bounds: to get the character width.
- glyph_bearing: lower left character starting point.
These values are needed for more precise glyph calculations.
This fixes a freeze when closing temporary windows with `AMD Radeon HD 7570M`
The performance is practically the same between calls (with a micro advantage for `GL_STATIC_DRAW`)
I couldn't check the difference in memory usage.
The ideal would be profile in different setups.
But due to the seriousness of the bug, these tests were postponed.
`BKE_sequencer_prefetch_get_original_sequence()` didn't look in metas
and returned NULL. This caused crash in disk cache that was trying to
read seq->name.
Add function that will look in meta strips recursively and condition
that seq must not be NULL.
Reviewed By: brecht
Maniphest Tasks: T76033
Differential Revision: https://developer.blender.org/D7597
An unintentional side-effect of rBfe7528ee919b was that when
extend-selecting a selected element in the outliner, it would be
deselected and activated rather than selected and activated.
This commit restores the expected toggling behavior. Consistent behavior
for extend-selecting child datablocks is not resolvable without a much
larger cleanup of the outliner select functions.
Allow render engine info to display correctly among other text overlays and scene statistics.
Differential Revision: https://developer.blender.org/D7586
Reviewed by Brecht Van Lommel
Previously there were two functions for FCurve extrapolation, one for
before the first keyframe, and the other for after the last. After the
previous cleanup made the variable names consistent, it was clear that
the code was almost identical. The biggest difference was in the sign of
many of the calculations, which was cancelled out by swapping `B-A` to
`A-B`. This showed that the computations are actually the same, and the
only remaining difference was which neighbouring handle to use in case
of Bézier curves.
No functional changes.
# Conflicts:
# source/blender/blenkernel/intern/fcurve.c
Variables have been renamed so that they refer to the endpoint and its
neighbor (rather than `bezt`, `prevbezt`, or `lastbezt`), and
unnecessary variables have been removed. By returning early the code
flow is also easier to understand.
No functional changes.
The `fcurve_eval_keyframes` consists of three parts:
- Before the first keyframe
- After the last keyframe
- Between the keyframes
This commit splits the first two parts into separate functions. This is
the first of a series of refactors, which will be committed into smaller
parts so that each is easier to follow & validate.
No functional changes.
This diff add supports for crash logs on windows for
release builds. This can be toggled on/off with the
`WITH_WINDOWS_PDB` cmake option. by default it is on.
Things to take into consideration:
Release builds are hightly optimized and the resulting
backtraces can be wrong/misleading, take the backtrace
as a general area where the problem resides rather than
an exact location.
By default we ship a minimized symbol file that can only
resolve the function names. This was chosen to strike
a balance between growth in size of the download vs
functionality gained. If more detailed information is
required such as source file + line number information
a full pdb can be shipped by setting `WITH_WINDOWS_STRIPPED_PDB`
to off.
Differential Revision: https://developer.blender.org/D7520
Reviewed by: brecht
Use the automatic property split layout (hence, change to the new 40/60% split
ratio) and add decorator buttons for animatable properties.
This actually applies to all node input buttons in the properties, e.g. world shading,
light shading, texture nodes.
Doing this makes the layout more consistent with other layouts in the
properties. But the decorators are also a useful hint for users that these
options can be animated. Previously using decorators and the automatic split
layout wasn't possible, I've done a number of changes now to have it supported.
Before I moved the socket icons to the left side, the decorators also looked
weird (two circle icons next to each other).
{F8497704} With nested items: {F8497708}
Reviewed By: William Reynish, Pablo Vazquez
Differential Revision: https://developer.blender.org/D7544
(This is a simplified version of D4786)
The advantage of highlighting the points would be to indicate more
clearly what is affected by the proportional edit.
The default circle is not so informative and sometimes it is even off
screen so the user loses the quick identification of the influence.
(See T75482)
The disadvantage of this design is that the points could end up hiding
the mesh.
The original patch added the option `draw_proportional_gradient`, but I
prefer to avoid adding more options and more information to the
interface.
I'm not sure if the advantages outweigh the disadvantages.
{F8504097}
Reviewers: #user_interface, #modeling
Subscribers:
All the driver-specific code in `fcurve.c` has been moved into a new file
`fcurve_driver.c`. The corresponding declarations have been moved from
`BKE_fcurve.h` to `BKE_fcurve_driver.h`.
All the `#include "BKE_fcurve.h"` statements have been investigated and
replaced with `BKE_fcurve_driver.h` where necessary.
No functional changes.
This introduces unittests for FCurve evaluation.
No functional changes to actual Blender code.
Differential Revision: https://developer.blender.org/D6778
For any modifier, the expected output when the input mesh is empty, is an
empty mesh. So this error message was useless, and could spam the
console in some usecases of the modifier stack...
Reviewed By: weasel, mont29
Differential Revision: https://developer.blender.org/D7571
This is to improve the case of T71055 where curves share the same batch
cache when they shouldn't.
This however, does not help to fix edit mode display.
The real fix would be to have a similar handling to what the mesh modifiers
do and duplicate the whole Curve data. But this is too much work/change for
the 2.83 release.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7569
This is to improve the case of T71055 where curves share the same batch
cache when they shouldn't.
This however, does not help to fix edit mode display.
The real fix would be to have a similar handling to what the mesh modifiers
do and duplicate the whole Curve data. But this is too much work/change for
the 2.83 release.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7569
Do cross transition from current to next frame instead of displaying
one image for n frames.
Reviewed By: ISS, sergey, campbellbarton
Differential Revision: https://developer.blender.org/D7417
This diff add supports for crash logs on windows for
release builds. This can be toggled on/off with the
`WITH_WINDOWS_PDB` cmake option. by default it is on.
Things to take into consideration:
Release builds are hightly optimized and the resulting
backtraces can be wrong/misleading, take the backtrace
as a general area where the problem resides rather than
an exact location.
By default we ship a minimized symbol file that can only
resolve the function names. This was chosen to strike
a balance between growth in size of the download vs
functionality gained. If more detailed information is
required such as source file + line number information
a full pdb can be shipped by setting `WITH_WINDOWS_STRIPPED_PDB`
to off.
The Release in the title of this diff refers to the
release build type, not the official blender releases.
Initially this will only be enabled for nightly build
bot versions of blender, official releases as of now
will not ship with symbols.
Differential Revision: https://developer.blender.org/D7520
Reviewed by: brecht
When using multires_reshape_context_create_from_ccg to create the
context mmd is null, so the subdivision smooth mode can't be checked
there.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7579
Looping over all primitives for every object is really slow, so this patch avoids that by moving
the necessary assignments inline with the primitive merging done for every geometry.
Improving scene statistics readability, and showing objects count while in Edit mode.
Differential Revision: https://developer.blender.org/D7534
Reviewed by Campbell Barton
This introduces two alternative subdivision modes that generates
displacement on the grids that look as Simple subdivisions but while
using the Catmull-Clark subdivision type in the modifier. This way,
Simple and Catmull-Clark subdivision can be combined when creating new
levels if needed, for example, to sculpt hard surface objects.
Subdivide simple smooths the sculpted data when creating a new
subdivision level. Subdivide linear also preserves the sharpness
in the sculpted data.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7415
This implements the main unsubdivide algorithm which rebuilds a base mesh and extracts the grid's data from a high resolution mesh.
It includes the Rebuild Subdivisions operator, which generates all subdivision levels down to the level 0 base mesh.
It supports:
- Rebuilding an arbitrary number of levels (Unsubdivide) or as many levels as possible down to level 0 in a single step (Rebuild Subdivisions).
- Rebuilding with already existing grids.
- Meshes with n-gons and triangles
- Meshes with more than 2 faces per edge
- Base mesh made completely out of triangles
- Meshes without poles
- Meshes with multiple disconnected elements at the same subdivision level
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7372
Return the correct sculpt level in BKE_multires_sculpt_level_get and
enable the property in the UI
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7575
Now it's possible to select the material in context menu and new menu to select material.
The patch and workflow has been tested in greasepencil-object branch.
* New Material selector in Draw mode Context menu:
{F8499259}
* Pressing `U`key in Draw mode display material menu.
{F8503224}
Reviewed By: mendio, pepeland
Differential Revision: https://developer.blender.org/D7554
This patch will add some compiler hints to break unrolling in the
nestled for loops of the voronoi node.
Reviewed by: Brecht van Lommel
Differential Revision: https://developer.blender.org/D7574
In the industry standard keymap, both deleting objects and collections
were mapped to the same keys causing confusion when only collections
could be deleted through the keymap.
This adds a new delete operator to delete all selected objects and
collections, accessible from both the keymap and context menu. Now any
selected objects and collections are deleted when Delete is chosen from
the keymap. This also updates the tooltip description which was
previously undocumented.
Resolves T67462
A Colorband's CBData color **is not** considered `PROP_COLOR_GAMMA`.
A Brushes color **is** considered `PROP_COLOR_GAMMA`.
(PROP_COLOR_GAMMA is used for colors which would be color managed before
display, could be renamed to something better once...)
This leads to different rgb values in ColorBand.CBData of br->gradient
and brush->rgb for seemingly identical colors. (this is because color
pickers do differently in case block->is_color_gamma_picker/
ui_but_is_color_gamma)
Now it looks like `paint_brush_color_get` is expected to return a color
in sRGB (according to @jbakker this is for legacy reasons) so we need to
run the colorband colors through linear -> sRGB.
It might very well be the case that a much deeper cleanup in this area
is needed, this is just a fix to get gradient brush colors
consistent again...
Maniphest Tasks: T75985
Differential Revision: https://developer.blender.org/D7501
Changing the order of include changes broke GHOST_DEBUG,
however it was using defines in a fragile way.
Fix by removing 'GHOST_DEBUG' and use 'WITH_GHOST_DEBUG' which
was already defined by CMake.
This patch enables TBB as the default task scheduler. TBB stands for Threading Building Blocks and is developed by Intel. The library contains several threading patters. This patch maps blenders BLI_task_* function to their counterpart. After this patch we can add more patterns. A promising one is TBB:graph that can be used for depsgraph, draw manager and compositor.
Performance changes depends on the actual hardware. It was tested on different hardwares from laptops to workstations and we didn't detected any downgrade of the performance.
* Linux Xeon E5-2699 v4 got FPS boost from 12 to 17 using Spring's 04_010_A.anim.blend.
* AMD Ryzen Threadripper 2990WX 32-Core Animation playback goes from 9.5-10.5 FPS to 13.0-14.0 FPS on Agent 327 , 10_03_B.anim.blend.
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D7475
Usable with the CMake option 'WITH_GHOST_WAYLAND'
The following functionality is working:
- Building with X11 and Wayland at the same time,
wayland is used when available.
- Keyboard, pointer handling.
- Cursor handling.
- Dedicated off-screen windows.
- Drag & drop.
- Copy & paste.
- Pointer grabbing.
See D6567 for further details.
Should prevent issue fixed by previous commit to happen again (since
read code, especially in undo case, is not really straight forward to
follow anymore).
Neither Nuke nor Natron support OpenCV's radial distortion model
which makes it impossible to have any kind of interoperability.
The new model is available under the distortion model menu in Lens
settings.
Differential Revision: https://developer.blender.org/D7484
The offsets are applied after toggling positional tracking off, so that
the view does not jump at that moment. But when changing the base pose,
keeping that offset doesn't make sense. Especially with landmarks, which
are supposed to give precise positions/rotations to jump to. For that
part the VR Scene Inspection Add-on will need a little adjustment
though.
Also exposes an explicit function to the Python API to reset the
offsets, to be used by the Add-on.
This is mostly untested since I don't have access to an HMD currently.
- Use `t->spacemtx` as the orientation matrix instead `t->orient_matrix`.
- Unify constraint behavior between modal and non-modal.
- Simplify code to remove old workarounds and rearrange struct members.
This fix T66142 since the actual `orient_type` (in the case
`V3D_ORIENT_NORMAL`) is used during Redo instead of always using
`V3D_ORIENT_CUSTOM_MATRIX`).
Differential Revision: https://developer.blender.org/D7469
used
Caused by {rBa6a9a12e8f32}
Other relevant commits:
rBb8ca806b7798e2f8dd6effca8f0d081b3cd8c23f
rBde530a95dc7b482dc22c933b9b8b2a98c79b5663
The issue is caused by some leftover BONE_TRANSFORM_MIRROR flags on a
bone from previous runs (file in the report had the flag still on
forearm.R).
With these false leftover flags still set, `pose_grab_with_ik()` cannot
work correctly. Culprit commit above removed the early clearing of this
flag on all bones, this should be restored [this happened in
`count_set_pose_transflags()`].
This should only be done in the beginning of the transform process, so
now still clear the flags early in 'createTransPose()' [but dont restore
this in 'count_set_pose_transflags()' -- this will be called from
special_aftertrans_update again, so placing the clearance here only
complicates things (autokeyframe_pose() still needs to work as well)...]
Maniphest Tasks: T75810
Differential Revision: https://developer.blender.org/D7527
The current "Select Linked" operator works based on mouse position and
makes no sense to call from the menus and was removed in rB536055e1ee0b.
This patch adds an operator independent from mouse position that just
selects all bones in relation to selected bones (and adds back menu
entries, adds keymap entry CTRL+L).
The original operator is renamed to 'select_linked_pick' internally
(this is now more in line to how "Select Linked" works for meshes,
curves etc)
ref T76071
Maniphest Tasks: T76071
Differential Revision: https://developer.blender.org/D7542
Done also in 2.83 release branch to avoid too much conflicts on merging
(some of those were already done for nodes in master, and gave me
conflicts yesterday...).
Add root usd library directory to build arguments, same as other libraries.
Also fix error/typo in compile_USD regarding _is_building.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D7563
count_set_pose_transflags --> transform_convert_pose_transflags_update
count_bone_select --> armature_bone_transflags_update_recursive
Also don't mix `BONE_TRANSFORM_MIRROR` with `BONE_TRANSFORM` in
transflag. (This was a mess introduced in rBde530a95dc7b).
passes than one in another slot
If a particular pass is not available in a slot we are switching to,
still show the menu, but with a blank name for the currently selected
item so that the user can change it to a valid value.
thx @brecht for providing the standard way Blender deals with these
kinds of situations.
Maniphest Tasks: T76179
Differential Revision: https://developer.blender.org/D7552
Fix T75279: BLI_assert failed when deleting object in debug build
(only).
And all general cases of ID pointer idproperties that would use a
data-block not referenced anywhere else in the depsgraph.
This includes idproperties from:
* All ID types;
* Bones and pose bones;
* Sequences;
* Nodes and sockets.
Differential Revision: https://developer.blender.org/D7551
Blender was not configured to exit with non-zero return code on Python errors.
A bunch of tests worked around this but not all. This removes the need for such
workarounds.
This uses the same framework as automated modifier tests. It adds a physics
modifier, bakes and compares vertex coordinates on the end frame.
Differential Revision: https://developer.blender.org/D7017
Submitting on behalf of Jesse Y (deadpin).
In test harness for modifier testing, now run mesh validation
on output mesh. Also, fix printing so it interleaves properly.
There are cases when a user can accidentally assign an operator to toggle an
invalid property to e.g. left click, which shows Python errors to the users.
Rather than throw an error and e.g. break 3D viewport selection for the user,
just print an error to the console.
The root cause of such bugs should be fixed as well, but a working Blender
is most important here.
The problem comes from the fact by no data being modified when switching
viewlayers.
To follow what the external render engines do, we completely reset the
viewport by freeing the GPUViewport to avoid any cached data from being
kept.
This fix case where you have wireframe on top of infront objects but
workbench AA conflicts and they appear to not be occluded.
Also T74923 is still fixed but we extend the fix to not mess the case when
using a mode that does not support infront.
It is just a quick fix for the tooltips in the graph editor, it replaces:
- "F-curve modifiers are disabled" with "Enable F-Curve modifiers"
- "F-curve is visible in graph editor for editing" with "F-Curve visibility in Graph Editor".
Reviewed By: billreynish
Maniphest Tasks: T75519
Differential Revision: https://developer.blender.org/D7387
There was an assert here as well since using the original object to read
from was having an empty runtime curve cache.
Now use BKE_vfont_to_curve_ex instead of BKE_vfont_to_curve, so we can
read from the evaluated object and write to the original curves in order
to have the modified data taken into account on next object evaluation.
(BKE_vfont_to_curve would read and write to/from the same object)
Final solution provided by @sergey in that report, thx!
Adds a wrapper-struct to create and return the three layouts required
for the propery split layout (i.e. `UILayout.use_property_split`). This
gives more flexibility for special treatment.
E.g. needed for adding the arrow icon buttons when there is a hierarchy
of nodes to be represented in the material properties (needs inserting
in the text column to not offset the split layout).
This commit also makes use of the utility for
`uiItemL_respect_property_split()`.
Caused by rBe82827bf6ed5.
DRW_draw_depth_object calls DRW_mesh_batch_cache_create_requested with
NULL scene, but that is accessed later on...
Scene is actually available, so pass that around.
Maniphest Tasks: T76131
Differential Revision: https://developer.blender.org/D7540
Usually items without labels don't use the property split layout and
just use the full layout width. In some cases that is not wanted because
it looks odd if single items within the split layout use the full width.
The option is unused but would be needed for adding decorators to the
material properties.
Seems like this was left out when UV operators were converted to multi-
object-editing, ref T54645.
Maniphest Tasks: T76111, T54645
Differential Revision: https://developer.blender.org/D7537
The operator in its current state is based on mouse position and doesnt
make sense to be called from a menu.
(In fact it should be called 'select_linked_pick' internally and a
separate 'select_linked' should be implemented similar to how "Select
Linked" works for meshes, curves etc -- see D7542 for this)
Note: We had the same thing for particles recently:
rBdd9dfadaac9b: remove "Select Linked" from the particle select and
context menu
rB5ca7c85e105d: Particle editmode: add mouse independent "Select Linked"
operator
Fixes T76071
Maniphest Tasks: T76071
Differential Revision: https://developer.blender.org/D7543
Previously `UILayout.prop_decorator()` (or `uiItemDecoratorR()` in C)
only worked for single items, not for arrays. The decorators are added
vertically, like `UILayout.prop()` adds them.
This will be needed for adding decorators to material properties, but
will likely have other use-cases as well.
Also, `None` (or `NULL`) can be passed for the data-pointer and property
now to create blank decorators (as already possible for
`uiItemDecoratorR_prop` in C).
# If ICU_ROOT_DIR was defined in the environment, use it.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
