1) There was a logic error in FileBuffer where when it was trying to
add a new 64kb chunk to hold output, it was adding an empty chunk,
but making sure we have space capacity to hold 64 thousand chunks.
So that was a bit of pointless juggling to get nothing good.
2) In UV_vertex_key, instead of trying to combine three members into
a hash value, badly, by doing some ad-hoc shifts and xors, use
get_default_hash_3 instead, which combines them way more properly.
Also avoid copying the whole hash map object.
On my windows box (Ryzen 5950X, VS2022), exporting Stanford Lucy 3D
scan:
- Binary: 13.4 -> 5.4 sec
- ASCII: 29.3 -> 14.6 sec
So basically 2x faster for two tiny changes.
This PR adds support for `GPU_storagebuf_clear` and
`GPU_storagebuf_clear_zero` to the Vulkan backend. It also adds test
cases for all backends.
Pull Request: blender/blender#105487
When multiple nodes (Frame nodes included in the selection) are scaled/
rotated, the TransData location and center can get "wrong" due to the
fact that Frame nodes dont only use `locx`/`locy` for their
representation while drawing, but also `offsetx`/`offsety`.
So in order to use the "real" top-left corner in the transform system,
we have to respect `offsetx`/`offsety` when creating/flushing transform
data.
In addition to the file in the report, this patch was also tested to work
well with nested Frame nodes.
Pull Request: blender/blender#105400
Fixes:
* General:
- Was assuming that positions/normals/UVs are always `float`, and colors
are always `uchar`. But e.g. positions are sometimes doubles, or colors
are floats etc.
- Was assuming that `face` element is always just a single vertex indices
property. But some files have more arbitrary properties per-face.
* ASCII importer:
- Was assuming that file elements are always in this order: `vertex`,
`face`, `edge`. That is not necessarily the case.
- Was only handling space character as separator, but not other
whitespace e.g. tab.
- Was not checking for partially present properties (e.g. if just `nx` is
present but not `ny` and `nz`, it was still assuming whole normal is there).
* Binary importer:
- Was assuming that faces are always 1-byte list size and 4-byte indices.
- Was assuming that edge vertex indices are always 4-byte.
For the assumptions above, it often lead to either crashes, garbage data
or not detecting presence of a vertex component. E.g. binary importer was
just always reading 4 bytes for vertex indices, but if a file has 2 byte
indices then that would read too much, and then later on would start reading
garbage. ASCII importer was doing out-of-bounds reads into properties array
if some assumptions were not correct, etc.
Improvements:
- Some ply files use different property type names, e.g. `float32`,
`uint16` or `int8` instead of `float`, `ushort`, `char`; now that is
supported too.
- Handles `tristrips` element. Some files out there do not have `face` but
rather has a triangle strip, internally using -1 indices for strip restarts.
Performance:
While doing the above fixes/improvements, in order to fix some things it was
more convenient to also make them more performant :) Now it avoids splitting
each ASCII line into a vector of `std::string` objects, for example, or
reading a binary file in tiny chunks.
Generally this is now 2x-4x faster than the previous state of C++ importer.
The code has changed quite a bit to achieve both the fixes and performance:
- Instead of separate files for ASCII and Binary reading, they are now both
in `ply_import_data.cc/hh`. Reason is that all of the "find correct property
indices" logic is the same between both (and that bit was mostly missing
previously).
- Instead of using raw C++ `fstream` object and reading line by line (which
in turn reads one byte at a time) or reading field by field, now there's a
`ply_import_buffer.cc/hh` that reads in 64KB chunks and does any needed
logic for the ASCII/header part to properly split into lines. This avoids
all the mutex locking, locale lookups, C++ abstraction layers overhead
that C++ iostreams have when doing a ton of tiny reads.
Tests:
Extended test coverage with new files (comitted in svn revision 63274).
11 new "situations", in both ascii and binary forms. Additionally, now also
has a Big Endian binary file to test; BE codepath was completely untested
before.
Overall reworked the tests so that they don't do the whole "load dummy
blend file, import ply file on top, go over meshes, check them", but rather
do a simpler "run ply importer logic that fills in PlyData structure, check
that". The followup conversion to blender meshes is fairly trivial and the
tests were not really covering that in a useful way.
Pull Request: blender/blender#105842
Viewer node paths usually start with the modifier, but in pinned
node editors the tree may not be used by the object in context.
In that case the modifier part of the path should be ignored.
The viewer node is always disabled in that case.
Pull Request: blender/blender#105826
Resizing an image via the operator did not mark it dirty
(`IB_BITMAPDIRTY` is needed to pick this up as being modified, if this is
not set, no warning/option is shown on file close).
Note that using RNA would already do this correctly (since it uses
`BKE_image_scale` -- which already calls `BKE_image_mark_dirty`
internally).
Pull Request: blender/blender#105851
While **marking** an asset would update the Outliner immediately (this
due to the fact that `ED_asset_generate_preview` indirectly took care of
a refresh), **clearing** an asset would not do this.
Now be explicit about this in the Outliner listener and consider asset
notifiers there.
Pull Request: blender/blender#105287
Preview render depsgraphs are put in the depsgraph registry
concurrently with other threads. This was lacking a mutex lock
and a map value that remains unchanged when other elements of
the map are updated.
Pull Request: blender/blender#105839
This changes the maximum viewport resolution divider for Cycles to
help users get a more responsive viewport.
This is done by changing the maximum viewport resolution divider
to a divider that aims to have the largest axis of the viewport
roughly equal to 128 pixels.
Depending on the circumstances, this change can result in a few
noticeable differences:
- Users with slow hardware and a large pixel_size, or slow hardware
and a low resolution screen, may observe a higher resolution viewport
during navigation, making the scene more readable. However this comes
at the cost of reduced responsiveness.
- Users with slow hardware and a low pixel_size and high
resolution screen may observe a lower resolution viewport during
navigation, providing a more responsive viewport during navigation.
Along with that, how Cycles iterates through resolution dividers
is changed to promote quick transitions between resolution dividers.
Meaning users don't need to wait through as many iterations to get
from a low navigation resolution to a 1:1 viewport resolution.
Pull Request: blender/blender#105581
This makes it so access to macOS SDK from newer versions than our
deployment target can be detected on a buildbot via failed build.
Pull Request: blender/blender#105595
When an object has no UV layers and an anonymous UV layer is created,
the anonymous layer gets set as the default (render) layer. This is
very confusing because it then uses a hidden anonmous layer. This patch
suppresses the usage of anonymous layers for rendering.
Pull Request: blender/blender#105192
`scissor_test_set` wasn't able to parse the arguments that were
passed correctly, due to incorrect control data during functino
registration.
This patch uses the correct control data during registration and
is able to parse arguments.
Ref: #104911
Pull Request: blender/blender#105850
Auto-depth is no longer reset during consecutive touch-pad motion.
Details:
- Add wmEvent::flag, WM_EVENT_IS_CONSECUTIVE to detect consecutive
track-pad & NDOF motion events. Expose via RNA as Event.is_consecutive.
- Consecutive events are broken by button/key presses and mouse motion.
- Add `WM_event_consecutive_data_*` functions, so operators can store
data between consecutive events.
- Add `ED_view3d_autodist_last_*` functions to access the last autodist
pivot point for view operators to use.
A renaming of UI scale factors from names that imply a relationship to
monitor DPI to names that imply that they simply change "scale"
Pull Request: blender/blender#105750
the path for clang_format_paths.py changed when the submodules
moved but format.cmd was never updated for that.
the work previously done by check_submodules.cmd is now done by
make_update.py so this file can be removed.
This is an issue revealed by the recent optimization in 4d3bfb3f41 to have
CPU and GPU subdivision topology both cached.
BKE_subsurf_modifier_subdiv_descriptor_ensure is what (re)creates the
topology refiner when needed. Invalidating the topology refiner on changes
must be done before it, otherwise we end up with an incomplete Subdiv that
either does not draw or draws incorrectly.
Pull Request: blender/blender#105844
This makes it possible to use `Vector` recursively if the inline buffer
has 0 size. Any other inline buffer size does not work, because then
the type would be embedded in itself which does not make sense.
Pull Request: blender/blender#105832
Various UI code would store the `AssetHandle` in a way that turns out to
be unsafe. The file-data is part of the file browser caching system that
releases file-data when a certain maximum of items is in the cache. So
even while just iterating over the assets, earlier iterated asset
handles may become invalid. Now asset handles are really treated as
volatile, short lived objects.
For the asset-view, the fix was more involved. There we need an RNA
collection of asset-handles, because the UI list code requires that. So
we create a dummy collection and get the asset handles as needed by
index. This again meant that I had to keep the index of the collection
and the asset-list in sync, so all filtering had to be moved to the UI
list.
I tried duplicating the file-data out of the cache instead, but that
caused problems with managing the memory/ownership of the preview
images.
`AssetHandle` should be removed and replaced by `AssetRepresentation`,
but this would be an even more disruptive change (breaking API
compatibility too).
Fixes#104305, #105535.
Pull Request: #105773
These are not really about reading or writing .blend files, they are
general utilities for file-names/paths. Having to link to the
blendloader library just for these utilities is annoying.
Moved them to `BKE_blendfile.h` now, in agreement with Bastien.
Pull Request: #105825
When linking a texture directly to the material output, it's likely being
done for the purpose of previewing. In that case, bias the heuristic towards
not building a light tree, as it's likely not needed and slow on dense meshes.
While this was just a single pixel off, it was a bit notable since the
highlight wasn't centered correctly. Now retina and non-retina screens match
visually.
Adds two modes of GPU frame capture support for
enhanced debugging. GPU frame capture begin/end
allow instantaneous frame capture of all GPU commands
within the capture boundary.
GPU frame capture scopes allow several user-defined capture
regions which can wrap key parts of code. These scopes are
exposed to connected GPU tools allowing the user to manually
trigger a capture of a known scope at the desired time.
This is currently integrated with the Metal backend for
support with Xcode.
Related to #105591
Pull Request: blender/blender#105717
Fix race condition if several competing threads are inserting Metal
buffers into the MTLSafeFreeList simultaneously while a new list
chunk is being created.
Also raise the limit for an MTLSafeFreeListChunk size to optimize
for interactivity when releasing lots of memory simultaneously.
Authored by Apple: Michael Parkin-White
Pull Request: blender/blender#105254
Optimized node graphs do not get cached and were
not correctly freed once their reference count reached
zero, due to being excluded from the GPUPass garbage
collection.
Also suppress Metal shader warnings, which are prevalent
during material optimization.
Authored by Apple: Michael Parkin-White
Pull Request: blender/blender#105795
Metal buffer binding validation would trigger an error
when a given shader had an empty PushConstantBlock.
This patch removes the default uniform code gen if
no uniforms are present, to avoid any possible issues
with buffers being bound to a shader where the destination
data block is size zero.
Authored by Apple: Michael Parkin-White
Pull Request: blender/blender#105796
Crash when selecting objects on AMD platforms running
Metal. This was caused by shader compilation warnings
being treated as errors in macOS 10.15. Wrapping
compilation failure with success check resolves error.
Authored by Apple: Michael Parkin-White
Pull Request: blender/blender#105739
immDrawPixels performs significantly slower in Metal
than OpenGL. This was caused by two main factors. Firstly,
the additional overhead of tiled texture update, where all
memory needed to be kept in flight for each update, but
caused update to take a slow path. Avoiding tile update
with Metal is more efficient for both memory pressure
and GPU pipelining.
Secondly, on AMD platforms, the staging buffer used
for temporary texture data was page-faulting when
several texture updates would occur within one frame.
This is due to limitations of allocating one large contiguous
memory chunk. Using the Metal buffer pool for staging
data is more efficient.
Authored by Apple: Michael Parkin-White
Pull Request: blender/blender#105794
Maximum distance of lines in screen space is limited. This limit seems
reasonable for FPS higher than 1, but UI allows to set 0.01 FPS with
soft. even lower values are possible.
This patch allows for normal operation within soft limits and labels are
still visible and quite usable within hard limits.
Pull Request: blender/blender#104849
Without assumptions of a mesh's direct ownership of its normals,
this was error prone, since normals could potentially be reallocated
when they are tagged dirty or retrieved with write access.
- Show/hide mask layers: the tooltip was confusing from a user's
perspective, because they should not be expected to know what a hide
flag is.
- Active Spline -> Active Point: likely a copy and paste error.
- Geo Nodes face is planar node: forgotten article.
- Axes, plural instead of axis for the viewport preferences. Here
there are several usages of axis or axes. Since they refer to
coordinate axes I believe they should be plural, even though the
property `mini_axis_type` is still wrong.
-----
Pull Request: blender/blender#105814
No functional changes.
This is just a micro-optimization to avoid updating `prev_point` and
calling `ED_gizmotypes_snap_3d_data_get` when snapping is not enabled.
The bug only happened in wireframe mode.
Originally the `const bool use_depth` indicated when projection should
be done on invoke.
Later it started to indicate when to snap on invoke.
But with keymap snap detection, using this `use_depth` is no longer
correct.
Implement the two cached normal accessors with C++ methods
directly. This avoids dealing with raw pointers and reduces the
amount of casting necessary.
Since normals are derived data, it's always a change to something
else that will cause them to change, like the winding order of a face
or vertex positions. So it's clearer to use tags for those things
directly. It's correct to remove the tag in one place since dirty is
the default state of a new mesh.
This validation dates back to when vertex normals were stored in
the `MVert` type (before cfa53e0fbe). Since normals
are all calculated in the same place, and aren't saved in files, this
isn't relevant anymore-- they can just be recalculated.
When creating the bounding box mesh for the viewport replacement,
copy the material from the original mesh. I'm not sure if Cycles is
meant to load materials from the original mesh or the Alembic file
itself, but either way, this should be a harmless change and fixes the
issue in the report.
Pull Request: blender/blender#105798
Create GPUNodeLinks for tiled_image and tiled_image_mapping together, to ensure they are the same texture.
See blender/blender#105661 (comment) for context and a more in-depth explanation.
Pull Request: blender/blender#105772
... or carnidal interpolation with only 2 color stops.
This was triggering an incorrect path due to missing optimisation cases.
Just fall back to the unoptimized case fixes the assert.
This was likely caused by a bad merge when doing the uniform name
patching for Metal.
This also fix the same issue for active UDIM tile overlay which wasn't
reported.
eaa87101cd made evaluated metaballs become meshes
for render engines. This exposed the normals calculated by the metaball
tessellation directly, whereas before they were recalculated later.
There are two fixes: not using the metaball tessellation normals at
all and calculating them with the standard Mesh code path instead,
or switching a define in the metaball code to use a more mesh-like
vertex normal accumulation. Since the results are very similar
(see attached renders), use the second solution, which should
be less expensive.
Pull Request: blender/blender#105799
Increase the default value for the maximum number of recently-opened
files from 10 to 20. Also change the user's preference on version bump
to this new value if their current value is exactly the old default.
Pull Request: blender/blender#105703
Move the deform curves with surface node group to last so it affects the
final generated curves consistently (though this will have a negative
performance impact), and make the generate and interpolate modifiers use
the surface mesh's rest positions.
When the height of the editor couldn't fit the sidebar tabs, they would shrink
to a size too small to read the tab label.
This change matches the behaviour with the Properties Editor navigation bar,
by introducing the following improvements:
* Avoid truncating tab labels.
* Allow scrolling when tabs don't fit.
Behaviour is similar to how scrolling works in the Properties Editor navigation
bar, supporting mouse wheel up/down and MMB, and switching tabs with
`Ctrl+Wheel Up/Down`.
Pull Request: blender/blender#105355
My PR blender/blender#104535
was committed as 88f9c55f7f and the logic was changed
while adding support for face sets, making the logic incorrect and
the warning system disfunctional.
Restore the logic from the original PR with added support for face sets,
fix const correctness issues, improve variable naming, and remove a
check for empty names, since all attribute-type layers should have
names in a valid mesh.
Fixes#105780
Previously only the icon of a file could be dragged in the list display
modes, the name label would invoke box select. This made dragging quite
finicky. I've seen this cause quite some frustration, especially when
the file browser is used as a regular editor to drag data from into
other editors.
Instead follow the Outliner (and some other file browsers like the macOS
one): Dragging on empty space invokes box select, dragging on the name
or icon invokes drag & drop of the item.
The hitbox for the dragging is the width of the string, and the full row
height. So there's no space between rows to do box-select from, it
always triggers dragging. This is based on feedback during testing.
Note that 1e9564864c and 6da512f0bc were needed to prepare this change.
Pull Request: #104830
The switch from `stroke_start` to `vertex_start` in 8c6d4aa103 forgot
to also update `iter->stroke_index_last` which also needs to use
`vertex_start`.
Pull Request: blender/blender#105797
Skip explicit binding location for samplers in OpenGL when not needed, since drivers can usually handle more sampler declarations this way (as long as they're not actually used by the shader).
Pull Request: blender/blender#105770
Skip explicit binding location for samplers in OpenGL when not needed, since drivers can usually handle more sampler declarations this way (as long as they're not actually used by the shader).
Pull Request: blender/blender#105770
The loading for the "All" asset library would include the "Current File"
library as if it were a regular asset libray on disk. Instead make sure
the latter is loaded properly first and is skipped when recursively
reading on disk libraries.
This PR fixes an error that is given when Metal API validation is enabled. The compute grid can exceed 65536 threads so `ushort` is not sufficient for `metal_grid_id [[threadgroup_position_in_grid]]`.
This PR also fixes OS version warnings ([Cycles Metal: Unguarded access to newer macOS features #105630](blender/blender#105630))
Pull Request: blender/blender#105763
The operator went through quite a bit of trouble to pass a color
attribute index to the operator, but then it always used the offset
from the first layer of the active color attribute's type.
Also remove the "copy domains temp" API function, which
generalized this more than necessary, and exposed the internals
of the custom data system a bit more than we would like.
The transformations were applied two times and the old fix was wrong because it needs to use the evaluated point, not the original one. Also I did a small code cleanup.
Pull Request: blender/blender#105202
The two removed BKE functions were at a mid-level of abstraction
that doesn't make total sense in this API. Removing them is also
helpful in the general effort to have the attribute system rely less
on `CustomData` internally.
Allow specifying a specific region to check for active button. This is
required in some circumstances, like Driver Popover.
Pull Request: blender/blender#105746
This simplifies the usage of the API and is preparation for #104478.
The `CustomData_add_layer` and `CustomData_add_layer_named` now have corresponding
`*_with_data` functions that should be used when creating the layer from existing data.
Pull Request: blender/blender#105708
This changes the Switch node so that it is implemented directly as a lazy-function,
instead of as a normal geometry node which uses `GeoNodeExecParams`. This improves
the design of the layered execution api, where different nodes can be implemented
at a proper different abstraction level. The simplest kinds of nodes are implemented
as multi-function, then there is `GeoNodeExecParams` and more specialized nodes are
implemented as lazy-function. The switch node is special in the sense that it currently
needs extra behavior in the lazy-function graph generation anyway.
`GeoNodeExecParams` can be simplified as well, because the Switch node was the only
one that used the `lazy_` methods.
We could consider adding back lazy-input functionality to normal geometry nodes
as it becomes necessary. Ideally, that could be integrated with the node declaration.
Pull Request: blender/blender#105696
Fix support for Wireframe and parametric nodes by resolving
compilation failures surrounding barycentric coordinates.
A final missing part of the Metal implementation for barycentric
coordinates was missing.
Feedback also addressed to move barycentric calculation out
of code-gen and into surface_lib.
Authored by Apple: Michael Parkin-White
This also resolves#103606.
Ref #96261
Pull Request: blender/blender#105740
Now only dynamic function parameters that use ParameterDynAlloc support
dynamically sized parameters arrays.
Add tests for both dynamic arrays that don't support resizing
(Image.pixels) and dynamic sized arguments using
(VertexGroup.add(index=[..])).
Regression in [0] which extended support for dynamic sized function
arguments.
[0]: dfb8c5974e
This adds a new set of APIs supporting the loading and saving of image
formats through OIIO. It makes use of the recent IOProxy work in OIIO
to align with the existing Blender image loading/saving machinery.
The support code here has been prototyped to work with ~7 of our image
formats so far. It includes centralized handling of `IB_test`,
`IB_mem`, and `IB_metadata` flags, which the existing code did not
handle consistently or at all depending on the format.
The PSD format (`format_psd.cc`) is included since the prior location
of the code has been restructured away. It serves as an example of how
the loading code typically flows for all the other formats.
Pull Request: blender/blender#105519
- DriverVariable.name update function passed DriverVar to
BKE_driver_invalidate_expression as a ChannelDriver.
- DriverTarget.name update function passed DriverTarget to
BKE_driver_invalidate_expression as a ChannelDriver.
- DriverVariable.type update function DriverVar accessed ChannelDriver,
clearing a flag.
This was exposed by [0] however this issue existed beforehand.
[0]: c26566ad27
In practice this probably didn't cause bugs, but it would have
caused extra copies of the UV helper layers. The layers are only
needed if we find true values. Mistake in 0fe0db63d7.
This is a non-recent regression that strangely went unreported.
It is expected that when snapping, only visible elements are considered
which does not include faces in wireframe mode.
This works like this before, and this change doesn't appear to have
been intentional.
Ref #105664
One of the advantages of separating this enum member from the others is
because mixing several members in a single one hinders debugging since
in this case the IDE does not define which enums were set.
Also separating this item makes it more readable as `SCE_SNAP_MODE_GEOM`
is not a snap mode but a combination of modes.
VKPixelBuffer is used by external render engines to allocate buffers
using the same GPU backend that Blender runs in.
In a later stage we should test what exact binding flags are needed. I
expect that it should be able to use as a transfer buffer to copy the
pixels over to a texture using transfer commands.
Pull Request: blender/blender#105741
This add the`CurvesGeometry::blend_read` and `CurvesGeometry::blend_write` methods
and uses them in the `curves_blend_read_data` and `curves_blend_write` functions.
No functional changes.
Pull Request: blender/blender#105737
The active frame is pasted always, so if multiframe is
copying the strokes don't need copy the active frame again.
Pull Request: blender/blender#105605
Implement ViewLayer.aovs.remove by adding a new RNA function to call
the internal BKE_view_layer_remove_aov.
Resolves#99259
Pull Request: blender/blender#105646
Issue was that the clamping parameters were not in
the correct order. This leads to undefined behavior
and also lead to small artifacts on other platforms.
Pull Request: blender/blender#105735
In most places where it appears in a menu, the operator would already
apply to all selected F-Curves. Now it is done consistently and explicitly
from all menu items. The default of the operator is now also set to 'all
selected', so that it also behaves like that when called from the operator
search menu.
The BMesh to Mesh conversion does some checks to the UV helper
attributes like selection to avoid copying them to the mesh if they
don't contain any meaningful data. However, it does this by looping
over all faces for every UV map, not in parallel, so it takes up a large
portion of the total time in the conversion. This commit moves that
to the existing similar checks.
On a 1 million face mesh with 3 UV maps, for me this improved the
conversion runtime by 75%, from 174ms to 99ms. Before the serial
loops took 88ms out of the total. Combining them with the existing
loop over faces only increased its runtime from 29 to 40ms.
Some add-ons choose to use the `warning` field in the `bl_info`
dictionary. This is potentially useful info, which should be shown to
the user translated.
This commit extends `dump_addon_bl_info()` from the i18n utils add-on,
to add this field to the message extraction.
The _gpu_ prefix is redundant as they are inside a namespace
and run as part of a test suite that already contain the name
gpu. (GPUOpenGLTest)
This patch also moved the texture test cases to its own
compile module.
This renames the `BKE_gpencil_*` as well as the `DNA_gpencil_types.h`
files to indicate that it's the legacy grease pencil.
Pull Request: blender/blender#105597
When a shader is bound it should outlife the pipeline. In one
test case where only the shader data was accessed it also bound
the shader. This isn't needed as the shader data should be
retrieved without binding the shader.
This change fixes the issue by not binding the GPU shader.
Patch version was increased, but the file subversion should have
been increased.
Also fixes previous incorrect patch versioning code as it didn't
add all 'version code until next subversion bump goes here.' after
version bump.
The function set bits in a bitmap for all the edge indices in a face.
With future changes to mesh topology storage though, this level
of abstraction won't be as helpful anyway.
Refactoring mesh code, it has become clear that local cleanups and
simplifications are limited by the need to keep a C public API for
mesh functions. This change makes code more obvious and makes further
refactoring much easier.
- Add a new `BKE_mesh.hh` header for a C++ only mesh API
- Introduce a new `blender::bke::mesh` namespace, documented here:
https://wiki.blender.org/wiki/Source/Objects/Mesh#Namespaces
- Move some functions to the new namespace, cleaning up their arguments
- Move code to `Array` and `float3` where necessary to use the new API
- Define existing inline mesh data access functions to the new header
- Keep some C API functions where necessary because of RNA
- Move all C++ files to use the new header, which includes the old one
In the future it may make sense to split up `BKE_mesh.hh` more, but for
now keeping the same name as the existing header keeps things simple.
Pull Request: blender/blender#105416
This is very similar to ebe8f8ce71, but applies the same
changes to conversions to non-evaluated meshes meant for original
data. The function also handles shape keys, UVs, selection history,
"scan the database" object vertex index remapping, and multires fixes.
Those operations are handled in parallel with the other conversions now.
Similar to before, the improvement is better the more attributes/data
contained in the BMesh. This time I observed an improvement of 50%
(182ms to 123ms) for a large grid mesh with many attributes, and 20%
for a large grid mesh with less data. Shape keys, selection, hiding, and
multires data should have less of a detriment to performance now too.
One remaining thing to improve is the recently added UV selection/pin
handling. This should be moved into the first single-threaded loop over
faces, or changed further.
Pull Request: blender/blender#105602
- The Math node lost the headers of its operation type menu in
ee985fa925 , because a translation context was assigned to the RNA
property, but the headers declaration was not updated to extract the
messages with matching contexts.
- The message "Group Input" had a trailing space, which can be added
after translation.
This is something we missed in #104599.
Without it, the default color isn't always set.
Thanks to user roman-13 for pointing out the problem,
and thanks to Hans Goudey for telling me the solution.
Pull Request: blender/blender#105539
Fix a regression that allowed to create several links between an
output socket and a multi input socket either by inserting
links or using the link swap feature.
This regression was caused by the link swapping feature
introduced in commit 89aae4ac82.
Pull Request: blender/blender#105631
Rename `struct ::UVPackIsland_Params` to
`class blender::geometry::UVPackIsland_Params`
Brings us closer to an "algorithm" style API.
No functional changes.
Multiple user actions performed quickly could be blocked by undo
compacting memory - if the background compacting task was not complete
when the next undo step was pushed.
Notes:
- This and recent improvements to BLI_array_Store gives over ~2x speedup
compared with 3.3x, over 10x compared with 3.4x.
A sub-surfaced cube with the modifier applied was used for testing
(~1.5 million polys), both randomized & non-randomized verts/edge/faces
were used to avoid the sub-surface memory layout biasing the results.
Tested transforming ~1/3rd of the mesh and inverting selection.
- Without compacting mesh-data in parallel, the optimizations to
BLI_array_store can give similar performance to 3.3x, however there
are still cases where performance isn't quite as good - so compact the
arrays in parallel to ensure performance is at least as good as 3.3x.
Resolves#105046.
The method of accumulating values to create a hash for each chunk has
been improved for ~16% better distribution of the resulting hashes.
Improve performance of array de-duplication, see: #105046.
Accumulating hashes with a byte/boolean array didn't include enough
information for a useful hash, creating hashes with many collisions.
This is the root cause of a performance regression since 3.3 where
mesh data (used for storing edit-mesh undo steps) was changed to store
selection in a boolean array, creating a bottleneck de-duplicating
chunks of that array for edit-mesh undo's custom-data de-duplication.
Resolve by increasing hash accumulation for arrays with smaller elements,
so each chunk of memory (a candidate for de-duplication) isn't as likely
to have hash collisions.
`char` (single byte) arrays now accumulate 22 values instead of 7, it's
taking more values into account was necessary as these are effectively
bits in the case of boolean arrays, 2-byte values accumulate 32 bytes,
4-byte elements accumulate 44 bytes, larger structs accumulate
`sizeof(type) * 7` bytes (as before).
Also ensure the accumulation read-ahead never exceeds the chunk size -
technically a fix although this would only happen when passing a small
`chunk_count` to BLI_array_store_create (in the range of 1-16) so this
didn't happen in practice.
Improve performance of array de-duplication, see: #105046.
Use uint32_t since it's sufficient for hashing, using an int64_t was
especially inefficient when allocating an int64_t for every boolean
(when compacting an array of booleans).
Improve performance of array de-duplication, see: #105046.
This is a fix for the previous commit d7c023eb25.
Before, every time the lambda was called, a copy of the BitVector was
made. This was very inefficient.
Now this has been fixed by passing the BitVector by reference (&) in
the lambda function.
In very specific cases, during intersection testing, `intersect` can
add polygons already checked as duplicates in the buffer that
corresponds to the rest of polygons that can form groups of duplicates.
As the buffer cannot have repeated indices, re-adding, even
temporarily, these duplicates can cause a buffer overflow.
While this may have some impact on performance, it's difficult to
predict these cases and thus add a buffer pad.
So the solution is to check if they are already duplicated.
Commit ea97bb1641 introducing the GHash mapping between objects and
their CollectionObject items in a Collection broke ID remapping of
collections's objects. Release builds would 'work', but debug builds
would assert in several ways when opening complex production files.
The root of the issue was a bad/missing handling of the 'duplicate case'
(several CollectionObjects pointing to a same Object).
While fixing the code was possible, it turned out to require disabling
to much safety checks. Further more, there was an opportunity to improve
efficiency of the related code in ID remapping (the pos-processing
checking for NULL and duplicates in collections objects lists).
This commit introduces a new 'dirty' tag for CollectionObject lists and
their ghash mappings.
This tag is set by the `foreach_id` callback when the `ob` pointer of a
CollectionObject is changed, and it is detected as (potentially)
breaking the consistency of that data.
This tag is then used by a new `BKE_collections_object_remove_invalids`
call, to only check and fix collections tagged as dirty, instead of all
the collections in the given Main. It replaces the previous
`BKE_collections_object_remove_nulls` and
`BKE_collections_object_remove_duplicates` functions.
The speed-up is about an order of magnitude for the clean-up code
itself, which gives 2-3 percent speed-up on resynching a complex
production file e.g.
This commit also includes some cleanups and re-organization of related
code.
Fix issues with the display of frame node labels, that made them
harder to read for people with low vision or on high dpi displays:
* Unclamp the size of text that is drawn in the frame node
so all sizes can be displayed consistently at all zoom levels
and independet of the UI scale.
* Account for the label when calculating the frame node's
bounds, so child nodes don't obscure the label.
Pull Request: blender/blender#104555
Don't expand view layer elements if element is previously used
This is similar as done for other display mode (eg. scene, library override)
Pass view_layer ID instead of scene as argument in `outliner_add_element`
Old Differential Revision: https://archive.blender.org/developer/D16661
Pull Request: blender/blender#104862
This patch enables edge panning for the operators where there was
a mismatch in behaviour between using the shortcut `G` and the
"Move" operator exposed via the menu and operator search.
Commit 19da434e9c introduced a `view2d_edge_pan` property which
was activated for the translate operators invoked when pressing G in
the default keymap.
The property is not enabled by default, to avoid it getting in the
way in some cases, so the "Move" operators exposed via the menus
didn't have edge panning. This lead to inconsistent behavior between
moving via the shortcut or via the menu.
Pull Request: blender/blender#104482
The use of wordexp(3) permits arbitrary code execution from manually-crafted
glTF files. See https://github.com/syoyo/tinygltf/issues/368 for more details.
In practice this shouldn't be an issue for Blender since the GlTF data isn't
manually crafted but from the OpenXR runtime (a bit like a driver). But
updating the library to include the fix is not a big deal anyway.
Note that the warning that required the local modification is no longer present upstream since
0bfcb4f49e
Pull Request: blender/blender#105536
Workaround for a crash when `addComputePipelineFunctionsWithDescriptor` is called *after* `newComputePipelineStateWithDescriptor` with linked functions (i.e. with MetalRT enabled). Ideally we would like to call `newComputePipelineStateWithDescriptor` (async) first so we can bail out if needed, but we can stop the crash by flipping the order when there are linked functions. However when addComputePipelineFunctionsWithDescriptor is called first it will block while it builds the pipeline, offering no way of bailing out.
Note that this only has an impact when the "MetalRT (Experimental)" option is checked.
Pull Request: blender/blender#105629
The reasoning is that the detail namespace is not to be used
outside the module itself. But one might want to use different
number types with these templates.
The `Base` suffix was chosen in order to be consistent with `MatBase`
and `Vector` naming convention.
Refactor the following functions and cover with tests
* `BKE_fcurve_calc_bounds` - used to get the `rctf` bounding box of an fcurve
* `BKE_fcurve_calc_range` - used to get only the x-range, potentially faster when not needing y extents
`get_fcurve_end_keyframes` has been replaced with `get_bounding_bezt_indices` - dealing with indices allows to iterate over that range later
### BKE_fcurve_calc_bounds
* pass in an `rctf` instead of float pointers
* extract logic to get bounds into separate functions
### BKE_fcurve_calc_range
* removed the parameter `do_min_length` it was always false, and this function shouldn't concern itself with clamping.
Calling code can do that if the return bool is false
* use function to get x bounds separated from `BKE_fcurve_calc_bounds`
Pull Request: blender/blender#105177
Archlinux faced an issue with AoT compilation: https://bugs.archlinux.org/task/77554
These were due to compiler flag strings handling going wrong when cmake
calls the custom command. It ended up moving quotes around, leading flags to
get passed to the main compiler instead of the graphics compiler and trigger
the following error: "Unrecognized build options: -ze-opt-regular-grf-kernel".
Pull Request: blender/blender#105615
* Last operator panel now works
* Added a strengh property for fairing modes
* Now works when called from a menu (added OPTYPE_DEPENDS_ON_CURSOR
to operator type flag).
The function to upload the normals uses an optimization to avoid
checking the smooth status or face normal of the triangle is part
of the same face. The smooth status needs to be initialized before
the loop for that to work.
Also do a bit of cleanup:
- Decrease variable scope
- Fix the reversed incorrect naming of `smooth`
- Retrieve mesh data at the start of the function
eb68334b58 replaced the pointer to looptris with a span
but left the variable for the number of looptris unset at zero. Fix by
using the size of the span instead.
The count wasn't clamped above zero in some newly optimized code.
Instead of adding it there, move the clamping to the field network,
similar to some other nodes. That makes it so the rest of the code
doesn't have to deal with the clamping, and should be faster in the
single-value case.
The previous API for clearing storage buffers was following the OpenGL
api. OpenGL has many options to support for data conversions, striding
and sizzling. Metal and Vulkan don't have these features and we have to
deal it ourselves.
Blender internally only uses a tiny subset for what is possible in
OpenGL. Making the current API to difficult to implement on our future
platforms as we had to implement all cases, most even not used at all.
By changing the API we make future development easier as we only need
to implement what we are actually using.
**New API**
`GPU_storagebuf_clear(GPUStorageBuf* ssbo, uint32_t clear_value)`
Related issue: #105492
Pull Request: blender/blender#105521
Clearing of clipmaps is the only place in Blender that uses non
uniform data (not all components of the cleared data to be exact
the same).
Vulkan has only the possibility to clear buffers using a single
uint32_t. There were two solutions:
- Add compute shader to Vulkan backend.
- Make Eevee-next responsible to clear the clipmaps.
When fixing this in the Vulkan backend it could lead to other issues
as the backend isn't aware what is exactly required and might overwrite
active bindings. We chose to make it a responsibility of Eevee-next
as there it is clear what is needed.
Related issue: #105492
Pull Request: blender/blender#105560
This patch re-implement the whole C rotation API into a more type
oriented C++ API. See the #104444 design task for more details about
the goals.
The list of C to C++ equivalent syntax can be found attached.
This adds `AngleRadian`, `AngleCartesian` and `AngleFraction` as
different angle types with the same interface. Each of them have
specific benefits / cons. See inline documentation for detail.
This adds `Axis` and `AxisSigned` class wrapped enums to increase type
safety with axes selection.
This adds `CartesianBasis` to represent orthonormal orientations.
Added a weight accumulation to dual-quaternions to make normalization
error proof. Creates the overhead of summing the total weight twice
(which I think is negligible) and add an extra float.
Named the dual-quaternion `DualQuaternion` to avoid naming ambiguity
with `DualQuat` which come up quite often (even with namespace).
Pull Request: blender/blender#104941
For mesh primitives, the bounds can be calculated trivially in advance
with negligible cost. In case they are needed later on, setting them
eagerly can save the calculation later on. For large meshes, this can
save tens of milliseconds before drawing.
Pull Request: blender/blender#105266
When subsampling was introduced in VSE it was disabled during
editing. Only when rendering it was enabled. This lead to
cache being different between editing and rendering. Leading
to confusion.
This PR will enabled the subsampling when editing. This way
it is more consistent.
Pull Request: blender/blender#105612
The shader libraries were not hooked up yet in cmake for windows since
when the shaderc libs landed there was no code yet that used it.
It's required now, so this change adds the missing bits.
Some checks here are really critical and should assert, but that one is
more an indication that something is not going right, though data itself
should still be mostly valid, so better warn the user with a LOG
warning, than be silent in release builds, and crash in debug ones.
Fix seam bleeding of non-manifold sections of the mesh, by copying pixels
that are covered by the brush stroke.
As manifold parts are already handled, the pixel copying solution can be
very straight forward.
* Pixels are copied from the same tile. So we don't need a mechanism that
copies and merges pixels from other tiles.
* Pixels are copied from the closest pixel that is being painted on. We
don't need to consider that that pixel can be in different areas of the
tile.
When we copy a pixel, we find the closest pixel in UV space that is being
directly influenced by a paint brush. We also look for the second closest
pixel, which is still a neighbor from the closest pixel. We can mix both
pixels together and store it in the destination. A mix factor is calculated
using the closest non manifold edge as a guidance.
The result of this step is a list of copy and mix commands that can be
executed to fix the seam bleeding for non-manifold sections of the mesh.
| Destination | Source 1 | Source 2 | Mix factor |
| ----------- | -------- | -------- | ---------- |
| 1780,1811 | 1780,1810| 1779,1810| 0.000000 |
| 1781,1811 | 1781,1810| 1782,1811| 0.168627 |
| 1828,1811 | 1828,1810| 1827,1811| 0.156863 |
| 1829,1811 | 1829,1810| 1828,1810| 0.188235 |
| 1830,1811 | 1830,1810| 1829,1810| 0.188235 |
| 1831,1811 | 1831,1810| 1830,1810| 0.188235 |
| 1832,1811 | 1832,1810| 1831,1810| 0.188235 |
| 1833,1811 | 1832,1810| 1832,1810| 0.000000 |
In the end we go over this list mix the sources and store the result at
the destination.
```
tile_buffer[destination] = mix(tile_buffer[source_1],
tile_buffer[source_2],
mix_factor);
```
**Encoding**
When using a large textures or large seam margins this table can grow
large and reduce performance as data retrieval is slower, than the
operations it has to perform. To improve the performance we encode the
table so less data retrieval needs to be done.
* first `DeltaCopyPixelCommand` is delta encoded from
`CopyPixelGroup#start_destination` and `start_source_1`. The others
are delta encoded from the previous `DeltaCopyPixelCommand`.
* For performance reasons PixelCopyGroup#pixels are ordered from
destination (left to right) for each row a new group would be created
as the delta encoding most likely doesn't fit. When pixels cannot be
delta encoded a new group will also be created.
**Compression rate**
When using Suzanne the compression rate is around 36% when using a seam
margin of 4 pixels. The compression rate may vary depending on seam
margin and model. For Suzanne the compression rate was around 36% for
various resolutions.
| Resolution | Margin | Decoded size | Encoded size | Compression |
| ---------- | ------ | ------------ | ------------ | ----------- |
| 2048x2048 | 4 px | 353.052 | 128.101 | 36% |
| 4096x4096 | 4 px | 700.140 | 255.137 | 36% |
| 8192x8192 | 4 px | 1.419.320 | 513.802 | 36% |
| 2048x2048 | 8 px | 721.084 | 193.629 | 26% |
| 4096x4096 | 8 px | 1.444.968 | 388.110 | 26% |
Pull Request: blender/blender#105336
The C4100 warning is related to unused formal parameters in functions.
Enabling it better aligns with "-Wunused-parameter" option in other
compilers.
While suppressing it with `__pragma(warning(suppress:4100))` is not the
same as using `__attribute__((__unused__))` in GCC or Clang, it is
still preferable to use it over completely hiding the warning.
This ensures consistent warning behavior across compilers and improves
code quality by addressing unused function parameters.
(Note that some warnings in Windows-specific code have already been
silenced in 7fcb262dfd)
Pull Request: blender/blender#105534
These functions will be useful to speed up the edit mode to object
mode conversion too, move them above that so they can easily be
used for that case later.
Currently a developer that starts blender with `--debug-gpu` or
runs the GPU test cases can receive an error when not the full
VulkanSDK is installed.
The VulkanSDK isn't required for normal developement and
therefore it is better to show it as a warning.
NOTE: VulkanSDK is adviced to use when developing in the Vulkan
backend as it contains tools that helps/speed up the development
and validation during development.
Pull Request: blender/blender#105599
Decorator buttons would be skipped when setting the tooltip data for all
buttons in the layout, but the duplicated data would still be marked as
used, so not freed.
Move two settings that were previously in the "View" menu of the Graph Editor into User Preferences.
It has been mentioned in the meeting by Luciano Muñoz Sessarego that it would be good to move that to the preferences so you can set it once and then forget about it.
The Settings moved are:
Only Selected Curve Keyframes
Use High Quality Display
Pull Request: blender/blender#104532
The traversable handle of a BLAS may be zero when the relevant geometry
is empty (no triangles/curves/points/...), as no BLAS is built in such cases.
It is not correct to attach a zero handle to a TLAS, so filter out such instances.
Invalid nodes are not added to the lazy-function graph. Therefore, their
outgoing links are also not added, which implies that the targets need
some default value.
Both the shader_builder and existing shader tests eventually
tested the same aspects. shader_builder is more modern and
handles more cases.
The old shader test requires a full backend in order to run
This commit replaces the old tests to just use the
shader builder for validation.
Shader builder can still be run at compile time, this is
just a convenience to have as a test case as well for CI/CD.
Ref: #105482
It is recommended to map buffers once and not each time the
mapped memory is needed. This patch will map the buffer when
created and unmap the buffer when the buffer is freed.
This patch will reduce the overhead where the Vulkan driver or
the virtual memory manager needs to be accessed.
Pull Request: blender/blender#105588
The correction bbc6bb3468 was still wrong because there it was
disregarded that `vert_ctx_len` does not necessarily indicate merges in
the same polygon.
Therefore, it is not safe to rely on `vert_ctx_len` to count possible
new polygons.
NOTE: It might be worth preempting part of the
`weld_poly_split_recursive` logic to identify what the new polygons are
in advance. But this can be left for a future refactor.
- Both success & ok were used for file reading, use the clearer name.
- Paths were single/double quoted, use double quotes for print/reports.
- Rename `path` to `filepath` / `dirpath`.
Add a filepath argument to load/save pre/post.
Also add save_post_failed and load_post_failed handlers so it's always
possible to for the pre handlers to run a matching post action.
This makes it possible to know the filepath of the blend file mean
loaded/saved as well as supporting running an action when load/save
operations fail.
When loading and saving the startup-file, the path argument is set to
an empty string.
Details:
New RNA types were added to support storing primitive values in
PointerRNA. Primitive{String/Int/Float/Boolean}RNA. These will likely
only be used in some limited cases, in the case of BKE_callback_exec it
allows strings to be included as part of the PointerRNA **pointers
argument.
Ref !104769.
Don't allow the hover of mouse to auto-raise another window while you
are entering data into a text or number input.
Pull Request: blender/blender#105446
The attribute, like the other attributes that start with `.` is not
supposed to be displayed in the spreadsheet or the attribute list
by default. This was missing from the commit that added the attribute.
Currently the shade smooth status for mesh faces is stored as part of
`MPoly::flag`. As described in #95967, this moves that information
to a separate boolean attribute. It also flips its status, so the
attribute is now called `sharp_face`, which mirrors the existing
`sharp_edge` attribute. The attribute doesn't need to be allocated
when all faces are smooth. Forward compatibility is kept until
4.0 like the other mesh refactors.
This will reduce memory bandwidth requirements for some operations,
since the array of booleans uses 12 times less memory than `MPoly`.
It also allows faces to be stored more efficiently in the future, since
the flag is now unused. It's also possible to use generic functions to
process the values. For example, finding whether there is a sharp face
is just `sharp_faces.contains(true)`.
The `shade_smooth` attribute is no longer accessible with geometry nodes.
Since there were dedicated accessor nodes for that data, that shouldn't
be a problem. That's difficult to version automatically since the named
attribute nodes could be used in arbitrary combinations.
**Implementation notes:**
- The attribute and array variables in the code use the `sharp_faces`
term, to be consistent with the user-facing "sharp faces" wording,
and to avoid requiring many renames when #101689 is implemented.
- Cycles now accesses smooth face status with the generic attribute,
to avoid overhead.
- Changing the zero-value from "smooth" to "flat" takes some care to
make sure defaults are the same.
- Versioning for the edge mode extrude node is particularly complex.
New nodes are added by versioning to propagate the attribute in its
old inverted state.
- A lot of access is still done through the `CustomData` API rather
than the attribute API because of a few functions. That can be
cleaned up easily in the future.
- In the future we would benefit from a way to store attributes as a
single value for when all faces are sharp.
Pull Request: blender/blender#104422
Node tree updates can crash if the tree contains a node group that points at an "undefined" tree type.
This can happen if the tree is linked from a library and the path is lost,
or if a custom (python) tree is used and the script is not run.
The fix is to check if the node group type is valid ("registered") and return an empty list otherwise.
Pull Request: blender/blender#105564
The first implementation based the max value on what seemed reasonable.
It was therefore limited it to 5.
I received a request from a user in the first already merged #104741
to allow a higher max value.
Thus I adjusted the max value to be the same as the max value used for
"Vertex Size", 32.
Pull Request: blender/blender#105544
Render the transparent object bounds to a low-res frame-buffer and ray-march the
bounds volume, tagging shadow tiles along the way.
The bounds volume is inflated by half a pixel as a conservative rasterization
alternative, to ensure the tiles needed by all LOD0 pixels get tagged.
The bounds are rendered with front face culling and then the fragment shader
ray-marches against the bounds volume.
Each ray-marching step size equals the world space size of the pixel at the step
depth.
The step bounding sphere radius is also sent to the shadow usage tagging library
to ensure the whole step volume is tagged.
Pull Request: blender/blender#104580
This renames the `OB_GPENCIL` object type and the `ID_GD` to `OB_GPENCIL_LEGACY` and `ID_GD_LEGACY` respectively.
There is no change for the user.
Pull Request: blender/blender#105541
With the move to Gitea the URI for line numbers changed from `$1234` to `#L1234`.
The change also removes a superfluous space character from the generated RST syntax.
When trying to use the Fill Range by Selection operator, in the
Distance from Camera Freestyle modifier, the operator fails if no
camera is active in the scene.
Before getting the data from the camera, check that it is defined, and
return otherwise.
Pull Request: blender/blender#105475
Hello, this is a small PR to check that my understanding of #102427 is correct before moving on to the rest of the issue.
This PR contains the updated UI of the `Sculpt` menu only. Other menus will be submitted for review later.
Currently exposed operators:
* Move
* Rotate
* Scale
* Box Trim (Trim Mode ="Difference")
* Lasso Trim (Trim Mode ="Difference")
* Box Add (Trim Mode ="Join")
* Lasso Add (Trim Mode ="Join")
* Line Project
* Smooth
* Surface Smooth
* ~~Scale (Could be left out?)~~
* Inflate
* Random
* Relax Topology
* Relax Face Set Boundaries
* Sharpen
* Enhance Details
* Erase Displacement
The original issue specifies `Relax Face Set Boundaries` and `Erase Displacement`. I'm not quite sure if this is done in the UI code or somewhere else.
Reviewed By: Joseph Eagar & Julian Kaspar
Pull Request: blender/blender#104718
Pick select is only meant to change a single element from a single
data-block. However, the operator worked on each object individually
rather than first finding the closest point, then processing the
selection. Change the operator to find the closest point across all
objects, then deselect if necessary, then select the closest point.
Pull Request: blender/blender#105495
Previously `SEQ_transform_single_image_check` function was used to check
if image or effect strip has only one frame of content. Now these strips
are flagged with `SEQ_SINGLE_FRAME_CONTENT`.
While previously this was implicit property of strip, benefit of having
explicit flag is that this property can be decoupled from strip length.
At a random the bf_io_ply_tests would fail in one of the fixtures.
The root of the issue was that the exporter parameters were used
uninitialized, causing the mesh to be triangulated in some of the
runs and not be triangulated in other runs.
This change makes it so PLYExportParams is always zero-initialized,
so that this solves this issue, and that adding fields to it in the
future will not re-introduce the issue.
Pull Request: blender/blender#105537
This patch implements the bicubic interpolation option in the transform
nodes. The path merely reuse the code in the shader image texture and
adds bicubic variants to the domain realization shader.
Pull Request: blender/blender#105533
Git: Add VS/VSCode litter to .gitignore
Neither regular VS nor VS Code can't seem to keep themselves from
littering in the source folders.
This change adds some common litter to .gitignore file to provide some
relief for developers using these editors/IDE's
When running unit tests or other fast completing renders, forced crashes can occur if there are any slow, outstanding PSO compilation requests (due to the `std::terminate` fall-back case in `~ShaderCache`).
This patch eliminates the need for this shutdown hack by using of the async version of `newComputePipelineStateWithDescriptor` when creating a PSO for the first time. In doing so, we are able to explicitly respond to app shutdown instead of waiting for the pipeline to finish compiling (..and then timing out and force-crashing). We still use the blocking version of `newComputePipelineStateWithDescriptor` when loading from an archive, as this can handle loading from a corrupted archive gracefully. Finally, we move `addComputePipelineFunctionsWithDescriptor` to *after* the PSO is built (as this will trigger a full blocking compile if the PSO has not yet been built, which would bring back the original issue).
Pull Request: blender/blender#105506
MTLFramebuffer's viewport was not correctly updated when
updating attachments. Behaviour modified to be consistent
with OpenGL.
Authored by Apple: Michael Parkin-White
Ref #96261
Pull Request: blender/blender#105529
This commit introduces `ConstListBaseWrapper`, to allow easy iteration over
`const ListBase *` in C++ code.
Basically `ListBaseWrapper` was renamed to `ListBaseWrapperTemplate`, and
got a new template parameter `LB`. The new `ListBaseWapper` class has `LB=ListBase`,
whereas `ConstListBaseWrapper` has `LB=const ListBase`.
Also in this commit is one use of `ConstListBaseWrapper` to make sure the
templated code is actually expanded & compiled.
Example use:
```cpp
for (const bDeformGroup *dg : ConstListBaseWrapper<bDeformGroup>(defbase)) {
...
}
```
Pull Request: blender/blender#105464
Indicating light colors by coloring the light icons.
Task: #104280
Pull Request: #105236
- Added a checkbox under overlay extra to enable/disable light coloring. Disabled by default.
- The outer ring and the sun rays are colored.
- Only the base color is shown, colors in nodes are not considered.
Since db6287873c, we added parenting (Keep Transform Without Inverse)
to the parent_set operator and exposed this in the UI in the invoke menu
of that operator.
This however never made it to the `Object` > `Parent` menu.
Since this is quite useful (and otherwise a bit hidden in the Adjust
Last Operation panel) and parent inverse can cause confusion in many
cases (see e.g. #105276 or #103969), now add this as an explicit entry
in the `Object` > `Parent` menu as well.
After ed870f87b9, panels headers displayed inside panels had their
label duplicated when translations were enabled. This is because a
string comparison was made against the original message, instead of
the translated message.
Pull Request: blender/blender#105151
- "Lines" in the sense of number of lines
- "Number" can mean "amount, count" or "index, offset"
- "Second" can be an ordinal number or a unit
- "Root": add the brush curve to the "square root falloff" sense
- "Strip" can be a sequence or a type of hair rendering
- "Constant" in the sense of a value, for the Geometry Nodes add
submenu (#105447).
Additionally, extract:
- "Press a key" from the Keymap preferences.
- "MaskLayer", upon new mask layer creation
Ref #43295, #105447
While developing a new armature draw type, I was switching between
branches and opening the same test file. It would crash Blender because
it assumed that the `else` clause could only mean `(arm->drawtype ==
ARM_OCTA)`. This is now explicitly tested for.
The result is that an armature with unknown draw type is not drawn at
all, but I prefer that over either resetting the draw type to something
valid (thus altering the blend file) or downright crashing.
This was caused by an incorrect assumption in the solver:
It tries to solve both collision and length constraints simultaneously,
using the projected movement of a point as a slide direction along the surface.
This only works if the distance of the previous curve point to the surface
is less than the allowed segment length. Otherwise the segment will
exceed the allowed length even with zero slide and NaN values are computed.
The case of larger surface distance can occur if the previous segment
solve was already stretching the current segment and then the point
moves further away. In this case we can simply clamp the segment length
without violating the contact constraint.
Pull Request #105499
This was caused by an incorrect assumption in the solver:
It tries to solve both collision and length constraints simultaneously,
using the projected movement of a point as a slide direction along the surface.
This only works if the distance of the previous curve point to the surface
is less than the allowed segment length. Otherwise the segment will
exceed the allowed length even with zero slide and NaN values are computed.
The case of larger surface distance can occur if the previous segment
solve was already stretching the current segment and then the point
moves further away. In this case we can simply clamp the segment length
without violating the contact constraint.
Fixes#105467
Pull Request #105499
Some UI functions have a "translate" argument, which if set to False
specifies that the message is not to be translated. This sometimes
means that it was already translated beforehands.
But many messages were still getting extracted, sometimes twice in
different contexts. Some featured errors because the arguments of
various functions would be concatenated, such as:
```
col.label(text=iface_("Branch: %s") % bpy.app.build_branch.decode('utf-8', 'replace'), translate=False)
```
which would get extracted as:
```
msgid "Branch: %sutf-8replace"
```
Pull Request #105417
When investigating ID user-count issues, it wasn't clear how nodes
were meant to handle user-count for ID's. Specifically that the
initfunc should _not_ increment the ID's user count.
Doing such writes leaves dangling file in the installation directory which
then is packaged as well. Not only this makes it so a random file gets
packaged for installation, it also makes notarization process to fail because
of not-so-clear reason.
The `ply_exporter_ply_data_test.SuzanneLoadPLYDataUV` fixture seems to be
unreliable and fails at random, even before this change. This makes it
hard to reliably get green light on all tests.
Pull Request #105504
Don't call recursion where it's redundant. The recursive algorithm
can carry dangerous behavior due to stack growth and overflow. The
probability is low for something like the frame nodes. But using a loop
is cheap, providing O(N = const) memory cost. A loop through the links
in a singly linked list is sufficient. The use of 2D vectors for
location mapping and other things can be separate.
Pull Request #105394
3e5ce23c99 introduced a regression in case the freed Main was part of a
list, and was supposed to be removed from it, since calling
`BLI_remlink` does _not_ clear the `prev`/`next` pointers of the removed
link.
This commit also contains a few more tweaks to recent related b3f42d8e98
commit.
Pull Request #105485
While this behavior can be useful in some cases, it can also create
issues (as in one of own recent commits, 3e5ce23c99), since it
implicetly keeps the removed linknode 'linked' to the listbase.
At least warn about it in the documentation of `BLI_remlink`.
This commit introduces a new Main boolean flag that marks is as invalid.
Higher-level file reading code does checks on this flag to abort reading
process if needed.
This is an implementation of the #105083 design task.
Given the extense of the change, I do not think this should be
considered for 3.5 and previous LTS releases.
Drivers: Introduce the Context Properties
The goal: allow accessing context dependent data, such as active scene camera
without linking to a specific scene data-block. This is useful in cases when,
for example, geometry node setup needs to be aware of the camera position.
A possible work-around without changes like this is to have some scene
evaluation hook which will update driver variables for the currently evaluating
scene. But this raises an issue of linking: it is undesirable that the asset
scene is linked to the shot file.
Surely, it is possible to have post-evaluation handler to clear the variables,
but it all starts to be quite messy. Not to mention possible threading
conflicts.
Another possibility of introducing a way to achieve the goal is to make it so
the dependency graph somehow parses the python expression where artists can
(and already are trying to) type something like:
depsgraph.scene.camera.matrix_world.col[3][0]
But this is not only tricky to implement properly and reliably, it hits two
limitations:
- Currently dependency graph can only easily resolve dependencies to a RNA
property.
- Some properties access which are valid in Python are not considered valid
RNA properties by the existing property resolution functions:
`camera.matrix_world[3][0]` is a valid RNA property, but
`camera.matrix_world.col[3][0]` is not.
Using driver variables allows to have visual feedback when the path resolution
fails, and there is no way to visualize errors in the python expression itself.
This change introduces the new variable type: Context Property. Using this
variable type makes allows to choose between Active Scene and Active View
Layer. These scene and view layer are resolved during the driver evaluation
time, based on the current dependency graph.
This allows to create a driver variable in the following configuration:
- Type: Context Property
- Context Property: Active Scene
- Path: camera.matrix_world[3][0]
The naming is a bit confusing. Tried my best to keep it clear keeping two
aspects in mind: using UI naming when possible, and follow the existing
naming.
A lot of the changes are related on making it so the required data is available
from the variable evaluation functions. It wasn't really clear what the data
would be, and the scope of the changes, so it is done together with the
functional changes.
It seems that there is some variable evaluation logic duplicated in the
`bpy_rna_driver.c`. This change does not change it. It is not really clear why
this separate code path with much more limited scope of supported target types
is even needed.
There is also a possible change in the behavior of the dependency graph: it
is now using ID of the resolved path when building driver variables. It used
to use the variable ID. In common cases they match, but when going into nested
data-blocks it is actually correct to use relation to the resolved ID. Not sure
if there was some code to ensure that, which now can be resolved. Also not sure
whether it is still needed to ensure the ID specified in the driver target is
build as well. Intuitively it is not needed.
Pull Request #105132
Currently, curves have a default offset of 1.0, while the initial (and
expected) value is 0.0. When resetting this value to its default, the
curve is now modified unexpectedly. This is most noticeable with text
objects: when resetting the offset of a new text, it will look very
broken.
Internally the value is stored with an offset of 1.0, with custom
setter and getter adding and subtracting 1.0 respectively. To give
this property a default of 0.0, we also need to add 1.0 to the initial
value upon curve creation.
Pull Request #105182
In order to properly translate UI messages, they sometimes need to be
disambiguated using translation contexts. Until now, node sockets had
no way to specify contexts and collisions occurred.
This commit adds a way to declare contexts for each socket using:
`.translation_context()`
If no context is specified, the default null context is used.
Pull Request #105195
This has the effect that the message is cut off at the end of the
first line. I copied the solution from other similar docstrings
elsewhere in the code.
As far as my regex-fu can tell, there are no other occurrences of this
in the codebase.
Issue reported by Joan Pujolar in #43295.
Pull Request #105474
**What are push constants?**
Push constants is a way to quickly provide a small amount of uniform data to shaders.
It should be much quicker than UBOs but a huge limitation is the size of data - spec
requires 128 bytes to be available for a push constant range.
**What are the challenges with push constants?**
The challenge with push constants is that the limited available size. According to
the Vulkan spec each platform should at least have 128 bytes reserved for push
constants. Current Mesa/AMD drivers supports 256 bytes, but Mesa/Intel is only 128
bytes.
**What is our solution?**
Some shaders of Blender uses more than these boundaries. When more data is needed
push constants will not be used, but the shader will be patched to use an uniform
buffer instead. This mechanism will be part of the Vulkan backend and shader
developers should not see any difference on API level.
**Known limitations**
Current state of the vulkan backend does not track resources that are in the
command queue. This patch includes some test cases that identified this issue as
well. See #104771.
Pull Request #104880
The up_axis_update/forward_axis_update was the same logic between
the two, so factor that out.
Also use the same time reporting logic in PLY as in OBJ/USD/Alembic.
When render is triggered from python and the render result is displayed
it isn't being updated as it wasn't tagged as being invalid.
Pull Request #105480
If the texture image path in the MTL is a "quoted" absolute path, the importer will fail to find the
file. It was only attempting to un-quote the path for the relative case. Now we attempt to un-quote
in all cases.
Pull Request #105478
If the texture image path in the MTL is a "quoted" absolute path, the importer will fail to find the
file. It was only attempting to un-quote the path for the relative case. Now we attempt to un-quote
in all cases.
Pull Request #105478
- Add missing braces for if statements
- Tweak variable naming to use snake case
- Use more common name for `MLoop`s of a face
- Use `std::move` when appending an array
- Use const for a few variable declarations
This commit implements three OSL microfacet closures that are needed to support
MaterialX: dielectric_bsdf, conductor_bsdf and generalized_schlick_bsdf.
Internally these map to existing microfacet closures, only the Fresnel term is
different.
Currently, we use the closure type to encode the type of microfacet distribution
(GGX/Beckmann/Sharp/MultiGGX), the lobes we're interested in
(Reflection/Refraction/both) AND the Fresnel type (None or Principled v1).
This results in the mess of dozens of options that we currently have. Since
adding Principled v2 and the MaterialX OSL closures will involve adding more
Fresnel types, this clearly doesn't scale.
But, since the earlier Fresnel rework (D17101), the Fresnel type only matters
in one place now. This allows to significantly clean up the closure type
handling. To do this, MicrofacetBsdfs now separately store their Fresnel type,
and instead of a single MicrofacetExtra we have one struct per Fresnel type
(unless no extra data is needed).
Further, instead of having one _setup() function per combination, the Fresnel
setup is also split into separate functions. This decouples the implementation
of new Fresnel terms from most of the Microfacet logic, and makes it a very
simple and clean operation.
This commit replaces the current Glass approach, where Glass is a virtual closure
that gets replaced with a Glossy and a Refractive closure, with a combined
closure that handles Fresnel after sampling the microfacet. That way, the Fresnel
term is more accurate since it accounts for the microfacet normal, not the
shading normal.
Also updates the BSDF sampling to use a 3D sampler now, since we need two
dimensions to pick the microfacet normal and then a third dimension to pick
reflection/refraction. This can also be used to get rid of the LCG in the
Principled Hair BSDF, which means we can remove it altogether once MultiGGX is
gone.
Also, "sharp" is now supported as a microfacet distribution in OSL, and 2
is supported as the "refract" argument to microfacet() in order to get glass.
Address some issues discussed in PR #104404:
- Vertex color options changed to None/sRGB/Linear, default is sRGB
to match the existing Python addon.
- Change name to "Stanford PLY" from "PLY" in the menu item.
- Default "Export UVs" to on.
- After importing vertex colors, they are set as enabled for render.
New (experimental) Stanford PLY importer and exporter written in C++.
Handles: vertices, faces, edges, vertex colors, normals, UVs. Both
binary and ASCII formats are supported.
Usually 10-20x faster than the existing Python based PLY
importer/exporter.
Additional notes compared to the previous Python addon:
- Importing point clouds with vertex colors now works
- Importing PLY files with non standard line endings
- Exporting multiple objects (previous exporter didn't take the vertex
indices into account)
- The importer has the option to merge vertices
- The exporter supports exporting loose edges and vertices along with
UV map data
This is squashed commit of PR #104404
Reviewed By: Hans Goudey, Aras Pranckevicius
Co-authored-by: Arjan van Diest
Co-authored-by: Lilith Houtjes
Co-authored-by: Bas Hendriks
Co-authored-by: Thomas Feijen
Co-authored-by: Yoran Huzen
msgfmt has a TBB dependency though bf_blenlib, now for a release build
The MSVC linker is smart enough to realize none of the TBB code is
actually used and discards it. In debug mode the linker is a bit more
conservative and doesn't, leaving msgfmt with a runtime dependency
on TBB. The problem here is, we only copy the runtime dlls during
the install phase, and msgfmt runs long long before that.
For this reason when we run msgfmt we should make sure any runtime
needs it could have are met in the path, there already is a handy
variable for that since oslc has similar requirements.
Pull Request #105048
During install all dlls should copy to the blender.shared
folder regardless if the dependency is on or off, creators
CmakeLists.txt already did this correctly, but for boost
the BOOST_POSTFIX and BOOST_DEBUG_POSTFIX variables were
not set causing the boost dll's not to be copied.
This change takes the setting of these variables out of the
WITH_BOOST block, but still guards it with a
WITH_WINDOWS_FIND_MODULES block so we don't break the build
for people building with that on.
When drawing text with multiple lines inside a frame node, depending
on the zoom level some lines would wrongly get clipped despite being
inside the clipping region.
This was caused by the clipping check in `blf_glyph_draw` not accounting
for the font’s aspect.
Pull Request #105389
Caused by b4100ed377. Image strips with only 1 frame of content do
expect any timeline frame to be translated into frame index of 0.
Check this case and return 0 explicitly.
Fix error in b4100ed377
`seq_retiming_evaluate()` returns range from 0 to 1, to which framerate
correction was applied. this is incorrect, and correction should be
applied to function input.
Unify both functions in one, with a more telling name,
to be sure of the order of the arguments. Some functional
cleanup of the using code to make it more explicit.
Pull Request #105413
When movie framerate does not match scene, content length was clamped to strip
length in scen framerate. This also caused issues with retiming which behaved in
similar way. Retiming was modified to use frame index of strip content, so even
when scene framerate is changed, retiming data is preserved in correct
proportions. This means, that handles are mapped to time in seconds rather than
to frames.
During the discussion for #101413 there was consensus that we could make
OIIO a mandatory dependency. This patch does just that.
The `idiff` testing tool remains optional.
Pull Request #105111
Similar to the previous commit, this simplifies future refactoring
to change the way edges are stored, and further differentiates
single poly variables from array pointers.
The issue was that when using the `HD_ALIGNED` handle type,
Blender would not automatically move the keyframe handles with the key.
Instead one handle would get stuck in place.
To remedy that manually move the keyframe handles in case the type is `HD_ALIGNED`
This makes it consistent with moving a key with G
Pull Request #105401
Consistently use edge draw flag instead of original index to determine if an
edge should be drawn or not.
In GPU subdivision the edge original index was used for both edge optimal
display and selection mapping to coarse edges, but they are not the same.
Now match the CPU subdivision logic and use a separate edge draw flag VBO.
For cage display, match Blender 3.3 behavior more in showing/hiding of edges
in wireframe mode. That is edges without a mapping to an original edge are
always hidden when there is no distinct cage, and drawn otherwise. This is
not ideal for e.g. the bevel modifier where it will always show some edges on
corners despite all edges being hidden by the user. But we currently have
no good information to decide if these should be hidden or not, so err on
the side of showing too much as it did before.
Fie #103706: bevel modifier edges not drawn correctly
Fix#103700: optimal display can't be turned of with GPU subdivision
Fix wrong edge display with GPU subdivision preceded by other modifiers
Pull Request #105384
Timer management code often loops over the list of timers, calling
independant callbacks that end up freeing other timers in the list. That
would result in potentail access-after-free errors, as reported in #105160.
The typical identified scenario is wmTimer calling wmJob code, which
calls some of the job's callbacks (`update` or `end` e.g.), which call
`WM_report`, which removes and add another timer.
To address this issue on a general level, the deletion of timers is now
deferred, with the public API `WM_event_remove_timer` only marking the
timer for deletion, and the private new function
`wm_window_delete_removed_timers` effectively removing and deleting all
marked timers.
This implements design task #105369.
Pull Request #105380
Window activation events on Windows-10 don't seem to be reliable as it's
possible for Alt-Tab to trigger WM_ACTIVATE on a window when switching
away from it. As detecting the keys which are held relies on a valid
active state - this meant Alt could become stuck when using Alt-Tab
to switch between windows.
Disable reading modifiers on activation for WIN32, activating the window
now clears modifiers on WIN32. This isn't ideal as held modifiers wont
be detected, re-introducing the error reported in #40059.
Previously, UBO bind locations were linearly incremented and
relied on the correct uniform location being queried. This fix
is a future requirement for EEVEE next, however, pulling forward
due to Issue #105280 highlighting a possible flaw with expected
uniform locations.
Authored by Apple: Michael Parkin-White
Ref #96261
Pull Request #105311
Intel GPUs exhibit a number of rendering artifacts.
The most substantial being incorrect resolve of reflections.
Splitting the reflections_resolve shader into two passes,
one for SSR and one for light probes ensures correct rendering
and optimal performance on this GPU.
Also resolves an artifact with ambient occlusion wherein
the pow(a, b) function causes excessive precision loss.
Using an alternative method for power calculation on these
platforms resolves the issues.
Authored by Apple: Michael Parkin-White
Ref T96261
Pull Request #105240
A bulk change, to make things moving as quickly as possible, instead of
doing per-modified-file basis.
This is pretty much direct translation of C code to C++, is not really
"proper" C++ usage. That could happen on a more case-by-cases basis.
Pull Request #105376
Metal backed requires HOST_READ texture usage flag
for irradiance grid. This was correctly in place for the
basic grid, but not for grid_prev.
Authored by Apple: Michael Parkin-White
Ref #96261
Pull Request #105312
Add overlay option for retopology, which hides the shaded mesh akin to Hidden Wire, and offsets the edit mesh overlay towards the view.
Related Task #70267
Pull Request #104599
Cleanup, try to always use const.
Many function signatures still have incorrect argument order
(constants, mutables). But this is a larger other cleanup.
Pull Request #104937
Increase the buffer sizes used for `BLI_str_format_uint64_grouped` to
prevent overflow on strings representing numbers within the uint64
range. Also creates and uses defines for all the formatted string
buffer sizes.
Pull Request #105263
This commit adds the ability to generate liboverrides of linked data at
the `BKE_blendfile_link_append` BKE level, and through the Python API
(the `BPY_library_load` context manager, aka `bpy.data.libraries.load`).
The python API was updated essentially to allow easy testing of the new
code. This commit also adds tests for the new 'override' behavior, and
for existing basic link one.
Current code only generates 'basic' overrides, without any handing of
hierarchies or dependencies, as for brush assets only the Brush ID needs
to be overridden.
That new feature does not aim at being exposed to user through the
link/append operations in its current state, as it is way too simplistic.
This change is a requirement for the Brush Asset project (#101908).
Pull Request #104746
The code of the 'Fix Deforms' operator was hard to read and inefficient, doing `O(num_vertices * num_vertex_groups)` evaluations of the mesh. It caused multiple issues and got in the way of improvements to Blender, and seems to be used very little (if ever).
It was decided in [last week's module meeting](https://devtalk.blender.org/t/2023-02-23-animation-rigging-meeting/27757#patch-review-decision-time-5) that this operator should be removed.
Pull Request #105237
Pick selection for the Curves object was not considering multi
object editing. Only the active object was considered.
This fix introduces pick selection for Curves for multi object editing.
Pull Request #105184
The toggle (for anything but float and int types) was swallowed in
bf948b2cef. Also seems ef68a37e5d discarded
`property_overridable_library_set` for bools.
Now treat the overridable toggle as a general property for all property
types.
Pull Request #105370
The map is used to, well, map localized copy of the tracks used by the
tracing thread to the original tracks in the movie clip. There seems to
be some accumulated stuff in there which is no longer used by the current
state of code.
There should be no functional changes.
Pull Request #105374
This PR removes the BKE_nlatrack_add, and adds new:
* BKE_nlatrack_insert_before
* BKE_nlatrack_insert_after
* BKE_nlatrack_new_before_and_set_active
* BKE_nlatrack_new_after_and_set_active
* BKE_nlatrack_new_head_and_set_active
* BKE_nlatrack_new_tail_and_set_active
methods to easily add new NLA tracks in relation to the existing track list.
Pull Request #104929
Under the following circumstances
* keys on 1, 3 and 5
* preview range set to 10-20
The frame channel operator would zoom into nothingness.
because no keys were found in the preview range.
(Only the `ANIM_OT_channel_view_pick` operator though)
This PR fixes it and notifies the user with a warning.
Pull Request #105179
Grease Pencil (when not in object mode) implements its own selection
opertor. This operator (`gpencil.select`) returns
`OPERATOR_PASS_THROUGH`, then falls though to `view3d.select` which can
toggle object selection (when using shift-click picking).
Removing `OPERATOR_PASS_THROUGH` would fix the object toggling, but this
was added in 62c73db734 with good reason (the tweak tool would not
work then).
Now prevent `view3d.select` from acting on Grease Pencil (when not in
object mode).
NOTE: longer term we could have grease pencil use view3d.select to avoid having to add these awkward exceptions
Pull Request #105342
Windows 11 has strange behavior with Alt-Tab.
In some cases an Alt-Press event is sent to the window immediately
after it is de-activated (both Left & Right Alt keys for some reason
even when only one is held).
This meant that:
- Modifiers could be enabled for de-activated windows
(so we can't assume de-activated windows have modifiers released).
- Releasing the modifier key would not be sent to the inactive window
causing the modifier key to be stuck.
- Button events over an inactive window are generated before activation,
so even though activation reads the correct modifier state,
the button event uses the "stuck" modifier state.
Now button & drop events on inactive windows always read the modifier
state first instead of relying on the modifier state to be cleared.
This has some advantages:
- If modifiers are held, they will be used as part of the click action.
- While modifier keys on inactive windows should be rare,
in the case this does happen - stuck keys are avoided.
So it makes sense to apply these changes for all platforms.
The current API makes more sense as part of a class, but for now, keep
consistency with the other geometry module headers and move the code
to the proper namespace, removing the `GEO_` prefix which is only meant
for C code.
Pull Request #105357
Also remove USE_WIN_ACTIVATE & USE_WIN_DEACTIVATE defines as they
were only added when changes to modifier handling failed on WIN32.
This logic has now been tested to work on all platforms.
These functions used internal values and only really make sense in
the context of the mesh validation process where they're used to remove
invalid elements from the mesh.
Note: Applies to both UV Sphere Projection and UV Cylinder Projection.
Adds a new boolean option "Preserve Seams" to UV Sphere Projection.
With "Preserve Seams" active, the Sphere projection will do a
greedy flood fill over the 3D topology, stopping at 3D boundaries
and also stopping at edges where "Mark Seam" has been used in the
3D Viewport.
During the flood fill, each face is mapped using the spherical
projection and then adjusted along the U axis so the UV map is
continuous across the shared edge.
With careful seam placement, this allows for the creation of a
spiral-cut-orange-peel unwrap, where a sphere can be unwrapped
into a single long continuous strip, wrapping multiple times around
the object.
Finally, if the flood fill process creates multiple UV Islands,
they are spaced along the `U` axis to prevent overlaps.
Pull Request #104847
With the goal of clearly differentiating between arrays and single
elements, improving consistency across Blender, and using wording
that's easier to read and say, change variable names for Mesh edges
and polygons/faces.
Common renames are the following, with some extra prefixes, etc.
- `mpoly` -> `polys`
- `mpoly`/`mp`/`p` -> `poly`
- `medge` -> `edges`
- `med`/`ed`/`e` -> `edge`
`MLoop` variables aren't affected because they will be replaced
when they're split up into to arrays in #104424.
This offers overflow checking in debug builds, avoids implicit
conversion to pointers, slicing features for future convenience,
and clarifies ownership. Also switch naming to plural like most
other arrays for further clarification.
This check is no longer needed as Campbell has removed the need to
pass around the active window. This check could potential be error-
hiding so best removed if not needed.
Pull Request #105351
This pull request adds a new tipe of resource handles (thin handles).
These are intended for cases where a resource buffer with more than one
entry for each object is needed (for example, one entry per material
slot).
While it's already possible to have multiple regular handles for the
same object, they have a non-trivial overhead in terms of uploaded
data (matrix, bounds, object info) and computation (visibility
culling).
Thin handles store an indirection buffer pointing to their "parent"
regular handle, therefore multiple thin handles can share the same
per-object data and visibility culling computation.
Thin handles can only be used in their own Pass type (PassMainThin),
so passes that don't need them don't have to pay the overhead.
This pull request also includes the update of the Workbench Next
pre-pass to use PassMainThin, which is the main reason for the
implementation of this feature.
The main change from the previous PR is that the thin handles are now
stored directly in the main resource_id_buf, to avoid wasting an extra
bind slot.
Pull Request #105261
Add specific modal keyitem for `Vert/Edge Slide` and `TrackBall`.
So they don't need to reuse modal items from other operators.
Note that there is a workround to avoid repeated keys in the status bar.
In `gesture_box_apply`, check if `exec` function returns
`OPERATOR_CANCELLED` and return 0 to prevent any undo items from being
created.
Pull Request #105065
This file has been tested on linux, other platforms may need some
tweaks, and/or dedicated files.
This is used to suppress errors with builds integrating ASAN sanitazing
tools, regarding memleaks detected in some third party libraries.
To use it, define the envvar option like that:
`LSAN_OPTIONS=print_suppressions=false:suppressions=/path/to/blender/source/tools/config/analysis/lsan.supp`
This is especially usefull when running ctest.
NOTE: Will also update https://wiki.blender.org/wiki/Tools/Tests/Setup
and https://wiki.blender.org/wiki/Tools/Debugging/ASAN_Address_Sanitizer
accordingly.
Applied for the motion tracking data data structures.
There are two advantages of doing so:
- More explicit and platform independent way of indicating that
something is legacy and is not to be accessed outside of the
versioning code.
- Simplifies conversion to C++ where having deprecated fields
triggers warning in implicitly defined assign operator.
Pull Request #105340
3e5ce23c99 introduced a regression in case the freed Main was part of a
list, and was supposed to be removed from it, since calling
`BLI_remlink` does _not_ clear the `prev`/`next` pointers of the removed
link.
This commit also contains a few more tweaks to recent related b3f42d8e98
commit.
While this behavior can be useful in some cases, it can also create
issues (as in one of own recent commits, 3e5ce23c99), since it
implicetly keeps the removed linknode 'linked' to the listbase.
At least warn about it in the documentation of `BLI_remlink`.
The active window was used by the NLA and the Graph editor however
this is not always available and not necessarily the window that
contains the area being initialized. Potentially causing the graph and
NLA spaces to be initialized with the wrong scene.
Active window access caused various awkward fixes in the past
([0], [1], [2]) which worked around the active window not being set.
Use a lookup for the window instead of accessing the active window.
Note that passing the window is an option too however this is only
used for versioning older files and is not be needed in most cases.
[0]: 20788e1747
[1]: 42f6aada98
[2]: 480e467ac9
As part of #95966, move the `ME_SEAM` flag on mesh edges
to a generic boolean attribute, called `.uv_seam`. This is the
last bit of extra information stored in mesh edges. After this
is committed we can switch to a different type for them and
have a 1/3 improvement in memory consumption.
It is also now possible to see that a mesh has no UV seams in
constant time, and like other similar refactors, interacting with
only the UV seams can be done with less memory.
The attribute name starts with a `.` to signify that the attribute,
like face sets, isn't meant to be used in arbitrary procedural
situations (with geometry nodes for example). That gives us more
freedom to change things in the future.
Pull Request #104728
This commit introduces a new Main boolean flag that marks is as invalid.
Higher-level file reading code does checks on this flag to abort reading
process if needed.
This is an implementation of the #105083 design task.
Given the extense of the change, I do not think this should be
considered for 3.5 and previous LTS releases.
GPUBatch.draw supports basic drawing methods. Although all
supported GPU backends support range based and instance based drawing.
This patch adds 2 methods to GPUBatch to add support to range based and
instance based drawing.
my_batch.draw_range(my_shader, elem_start=10, elem_count=5)
Will draw my_batch using my_shader. From the attached index buffer
elements 10-14 will be drawn.
my_batch.draw_instance_range(my_shader, instance_start=0, instance_count=10)
will draw my_batch using my_shader 10 times. Inside the vertex
shader the current instance number is held by gl_InstanceID.
Pull Request #104457
1. Changes the subdivision function to not fill in time but add 0 to fix bug #104824
2. Fixes a bug in sanitization function noticed while fixing this bug.
Pull Request #105306
Add a hash for faster look-ups on collection->gobject,
This avoids a full list lookup for every object added via Python's
CollectionObject.link as well as linking via BKE_collection_object_add_*
functions.
While the speedup is non-linear, linking & unlinking 100k objects from
Python is about 50x faster. Although unlinking all objects in order
(a best-case for linked lists) is approximately the same speed.
Ref !104553.
Update the style of the Python Console banner to "INFO" instead of
"OUTPUT".
This change makes it easier to difference user generated output from the
initial banner text.
This also has an advantage that "Copy as Script" excludes the banner.
Ref !105188.
Rewrite the logic to depend less on local variables and prefer spans
and indices over points and pointer arithmetic. Also make use of the
IndexRange type for some basic logic, correct the mesh that the
sharp edge layer was chosen from, and reduce variable scope.
The material indices from the caps were only copied if the base mesh had
a material index attribute. Fix that by copying them manually if the cap
has the attribute.
Search list's region is having its size members (winx and winy) set
to values that are one pixel too small. This causes text to look bad
as they are slightly off their pixel alignment.
See #105308 for more details and an illustration of the issue.
Pull Request #105308
Nodes are sorted based on the selection. In some cases (even depending
on processor speed, nodes can be selected and reordered, and another
operation can run before the next redraw). That gives a window where
operators mapped to the same input as selection can run with invalid
socket locations (which aren't updated after the nodes are reordered,
since they are stored in a separate array).
To fix this, move the socket locations from the node editor runtime
data to the node tree, tag them as invalid when the nodes are
reordered, and check for that status in a few more places.
A better longer term solution is not reordering nodes based on
UI status and instead storing the UI drawing order separately.
Pull Request #104420
Add check to WM_check for lack of wmWindowManager->winactive. Sets it
if there is a window and makes that one wmWindow->active as well.
Pull Request #105225
This patch fixes hanging unit tests when MetalRT is enabled. It simplifies and fixes the kernel selection logic by baking the MetalRT-specific options into `kernels_md5` rather than expanding out and testing MetalRT bit flags explicitly.
Pull Request #105270
This was backported from tmp-vulkan. When disabling the fence check
in ghost it is able to start blender. It will show a black screen
so not usable for users.
- make_update.external_script_add_origin_if_needed
returned None or an empty string. As neither where checked simply
return None.
- git_get_remote_url had an incorrect annotation.
Names such as `dummyult` and `dummyet` didn't read very well,
underscore separate these names.
Also rename some variables that used old conventions which missed
being updated (`mpr` for manipulator instead of `gz` for gizmo).
When an RNA type was registered, any existing dynamic types with the
same name were unregistered. This didn't account for built-in types
which cannot be unregistered in (most cases) allowing duplicate
operators for e.g. to be registered with the same name as existing
built-in operators (asserting with debug builds with GHash duplicates).
In practice the newly registered operator would be called unless
adding operators caused the GHash to be resized which could cause the
original operator to be used.
As registered RNA type identifiers are meant to be unique, don't allow
duplicate names in the first place. Now all dynamically registerable
RNA types prevent this situation, raising an error when scripts
attempt to register a type with an identifier matching the name of a
type that could not be removed.
Shortened in [0], increase to 1024 with the following changes:
- Use BKE_ST_MAXNAME for translation_context.
- Use OP_MAX_TYPENAME for wmOperatorType.name.
Both these limits were already used elsewhere but happened to use
RNA_DYN_DESCR_MAX (incorrectly).
[0]: f403d9a2b1
Consistent with naming from 1af62cb3bf. Keep the "coord"
naming in the "vert_coords_alloc" set of functions since they should be
removed (see #103789).
Caused by 96abaae9ac. Just keep the old argument
in the `_ex` version of the function for now. It can be removed
when the explode modifier is removed in 4.0.
Previously [D16255](https://developer.blender.org/D16255)
There is no option to adjust the edge_width like there is in the preferences for vertex_size and face_dot_size.
I only added the option for 3DView and UV/Image Editor, and limited both to a max size of 5 pixel, since the edges do not look very nice with too high values.
In the UV Editor only, there are always black outlines on the edges, I could not find a way to reduce the increasing thickness of these black outlines.
The default edge_width of 1 pixel:
Here the edge_width with a falue of 3:
And here the visible increase of the dark border of the edges and their overlap (even at the maxed size of 5):
Lastly for the 3DView the max edge_width of 5 looks like this:
Pull Request #104741
When there are no loose edges, the loose edge bitmap shouldn't be used.
That was already documented in the loose edge storage struct, but the
bit vector wasn't actually cleared.
Share the bounds cache across the input and output meshes of some
mesh operations that don't change the min and max positions: simple
subdivision, edge/face deletion, and triangulation. If the source mesh's
bounds are computed, or if the mesh is persistent, this can save
recalculation of the bounding box, which takes a few milliseconds
for large meshes.
No behavior change intended.
Many file drag & drop handlers used the icon assigned for dragging to
determine what type of data is dragged. This is fragile, for example
changing an icon would break drag & drop (!). This happened a few times,
e.g. see 3788003cda. It's also causing problems with #104830, which
changes how file browser drag data is handled.
Instead use the file extension to determine the file type.
Exiting curves edit mode (going to object mode) would not update the
screen.
The fix adds a case to `ED_object_editmode_load_free_ex` for CURVES
to make sure the function returns properly. This then correctly adds the
notifier in `ED_object_editmode_exit_ex` to update the screen.
Pull Request #105252
- "Value" in the sense of color lightness is not the same word in
Japanese as other usages. See #105113.
- "Double" as a data type vs. a value.
Also extract "Custom Color Presets" in the tracking UI.
Run clang-format as well.
Pull Request #105187
This adds some simple null checks to avoid the crash. It might still
be good to improve the error message, but also does not seem as
important as avoiding the crash. Typically, users should not run into
this issue because the assets are shipped with Blender.
Actually is impossible to filter the Grease Pencil object type in the Outliner because only Meshes, Cameras and Lights are supported. This patch adds the Grease Pencil filter that allows artists to select only this type of objects. This filter is very handy for storyboarding.
Pull Request #104473
When using multiple compositor output nodes, compositing would fail
, showing a completely black output as it doesn't respect the active
node.
This patch will equalize the implementation with the viewer nodes.
Patch created by @OmarEmaraDevFixes: #86836
Pull Request #105235
Due to an error in GPU module we fixed the memory size in the
Vulkan backend. Last week the error has been fixed in the GPU module
so we can remove the temp fixes in the Vulkan backend.
Pull Request #105244
Similar to recent issues with gl_shader_interface,
ShaderInput lists need to be sorted to ensure correct
and efficient uniform lookup by name.
Authored by Apple: Michael Parkin-White
Ref #96261
Pull Request #105239
This commit adds the default .usdz export capability.
The importer already supports usdz so no change is required other than updating the text in menu to match the updated exporter text.
On export, a .usd/a/c file has to be created first, and then converted to .usdz. A weird change of directory is required because of a quirk with the USD conversion to usdz. If an absolute filepath is passed into the `UsdUtilsCreateNewUsdzPackage` function, the usd files inside the usdz archive will have the same directory structure, i.e. if one tries to create a file at `C:\code\BlenderProjects\file.usdz`, when the usdz file is created, inside it will have the structure `\code\BlenderProjects\file.usdc`.
This is counteracted by setting the current working directory to the temporary session directory where both the usdc and usdz files are created, and just passing the file name to `UsdUtilsCreateNewUsdzPackage` without any filepath. Once the usdz file is created it is moved to the intended directory.
There is a separate `UsdUtilsCreateNewARKitUsdzPackage` capability for exporting usdz for iOS devices that will be implemented in a follow up patch as it will require some more small UI changes.
Co-authored-by: Charles Wardlaw (@CharlesWardlaw)
Co-authored-by: Sonny Campbell (@SonnyCampbell_Unity)
Co-authored-by: Bastien Montagne (@mont29)
Pull Request #105185, based on #104556.
Pull Request #105223
While some implementations of `getcwd` may return an allocated string
instead of the given char buffer in some cases, this is not the expected
behavior of the BLI wrapper. Not to mention the danger of returning a
pointer to a static char buffer...
Improve `ChangeWorkingDirectoryTest` to be more 'full check' regarding
behavior of both `BLI_current_working_dir` and `BLI_change_working_dir`.
Also move call to `BLI_threadapi_init` into proper `SetUp` method (to
have correct symmetry with the call to `BLI_threadapi_exit` in the
`TearDown` one).
Based on investigation by Charles Wardlaw (@CharlesWardlaw).
Pull Request #105220
Add `BLI_change_working_dir(path)` to change the current working directory.
This change is required for adding USDZ support to Blender. When exporting to that format, we are required to do a weird change of directory because of a quirk with the USD library's USDZ functionality. If an absolute filepath is passed into the `UsdUtilsCreateNewUsdzPackage` function, the USDZ archive will store that full path.
macOS uses `NSFileManager` through some new Mac-only wrapper functions.
Ref #99807
Pull Request #104525
Apparently `git checkout -t` is only allowed to happen for new branches.
Added a code which checks whether the branch already exists and it so
uses the `git checkout <branch>`.
Pull Request #105234
* Refactored the color filter op to have an ->exec callback.
* Added nullptr checks to the filter cache API to support
running outside of a view3d context.
* Redo panel displays the active filter type's name in the
header.
To improve mesh upload speeds and reduce the size of the scene data which allows larger scenes to be rendered.
The meshes in Cycles are currently stored as flattened meshes, where each triangle is stored as a set of 3 vertices. Unflattening writes out the vertices in a list according to the index buffer. This uses a lot of memory and for current hardware does not provide a noticeable benefit. This change unflattens the mesh by directly using the meshes vertex and index buffers directly and skips the unflattening. This change allows for larger scenes and also a reduction in the sizes of the meshes. Further it results in a decrease the amount of time it takes to upload the data to a GPU. This is especially important for when multiple GPUs are used in a single machine.
Pull Request #105173
In Edges and Edges & Faces modes, the node copied the positions once
with the other generic attributes and another time specifically just as
the positions. This is now unnecessary since positions are stored as
a generic attribute (1af62cb3bf). In a simple test this saved
2ms out of a total 12 in these modes.
e8f4010611 unified the bounds computation for the new curves
object type and the rest of the curves system used by geometry nodes.
In the process, it made bounds affected by the control point radius.
In theory that makes sense; the bounds are supposed to be the extents
of the visible geometry. But in practice the change wasn't expected,
for a few reasons:
- The radius has never affected the bounds for the legacy curve type
- The default radius of legacy curve objects is absurdly large at 1.0m
- Only the new curve object has visible radius, and only in "strip"
mode or when rendering with Cycles
Currently the bounds are only used for the "Bounding Box" geometry node
and the panel in the 3D viewport sidebar, so there isn't any incentive
to choose less intuitive behavior yet.
Long term, the correct behavior is probably to include the radius in
the bounds, but this commit postpones that change to when it works
better with the rest of the curves system.
Pull Request #105154
Writing to a bitmap from multiple threads causes races when writing to
bits within the same integer. Instead, write to a separate boolean
array while subdividing, then move that to the final mesh bit vector.
Notes:
- The final copy to the bit vector could be replaced by a generic
`copy_from(Span<bool>)` call in the future.
- Theoretically we could entirely replace the `BitVector` with an
`Array<bool>`, but 1/8 the memory use for edges is likely worth it.
Pull Request #105156
The initial subdivision context counting ended up using unnecessarily
complicated logic to count the number of final vertices. In a first pass
it added vertices for every coarse edge. Then it added the same number
of vertices for every loose edge. That adds up to the same number of
vertices for the edges, so the separation is redundant and can be
replaced with a single multiplication.
The bitmap doesn't need to be cleared then, since it isn't used now.
In a test of a mesh with 2 million faces and 3 million vertices, this
saved 2.8ms (though the whole subdivision process takes around 700ms).
Pull Request #105159
This commit adds the default .usdz export capability.
The importer already supports usdz so no change is required other than updating the text in menu to match the updated exporter text.
On export, a .usd/a/c file has to be created first, and then converted to .usdz. A weird change of directory is required because of a quirk with the USD conversion to usdz. If an absolute filepath is passed into the `UsdUtilsCreateNewUsdzPackage` function, the usd files inside the usdz archive will have the same directory structure, i.e. if one tries to create a file at `C:\code\BlenderProjects\file.usdz`, when the usdz file is created, inside it will have the structure `\code\BlenderProjects\file.usdc`.
This is counteracted by setting the current working directory to the temporary session directory where both the usdc and usdz files are created, and just passing the file name to `UsdUtilsCreateNewUsdzPackage` without any filepath. Once the usdz file is created it is moved to the intended directory.
There is a separate `UsdUtilsCreateNewARKitUsdzPackage` capability for exporting usdz for iOS devices that will be implemented in a follow up patch as it will require some more small UI changes.
Co-authored-by: Charles Wardlaw (@CharlesWardlaw)
Co-authored-by: Sonny Campbell (@SonnyCampbell_Unity)
Co-authored-by: Bastien Montagne (@mont29)
Pull Request #105185, based on #104556.
While some implementations of `getcwd` may return an allocated string
instead of the given char buffer in some cases, this is not the expected
behavior of the BLI wrapper. Not to mention the danger of returning a
pointer to a static char buffer...
Improve `ChangeWorkingDirectoryTest` to be more 'full check' regarding
behavior of both `BLI_current_working_dir` and `BLI_change_working_dir`.
Also move call to `BLI_threadapi_init` into proper `SetUp` method (to
have correct symmetry with the call to `BLI_threadapi_exit` in the
`TearDown` one).
Based on investigation by Charles Wardlaw (@CharlesWardlaw).
Pull Request #105220
GPencil 3D stroke rendering uses a geometry shader.
This is unsupported by the Metal backend, so implement
fix for this failing compilation by shifting geometry shader
logic into the Vertex shader for Metal backend.
Authored by Apple: Michael Parkin-White
Ref #96261
Pull Request #105143
Metal LineLoop emulation path does not correctly apply
when using SSBO vertex fetch mode alongside 3D line
rendering.
Patch moves line emulation above SSBO
vertex fetch setup to ensure the correct emulation
parameters are passed to the shader.
Authored by Apple: Michael Parkin-White
Ref #96261
Pull Request #105142
Resolves issue with nearest filtering on UI Icons. Note that as
Metal does not support LOD bias as a parameter on a sampler
object, the original code has been modified to perform LOD
biasing at the shader level.
As GPU_SAMPLER_ICON is not widely used, it is more
efficient to apply directly to the affected shaders, rather
than workaround passing in the sampler LOD bias as a
separate value e.g. uniform or push constant.
Original PR feedback addressed to also refactor ICON
shaders to use consistent style for single and multi
Icon rendering.
Authored by Apple: Michael Parkin-White
Ref #96261
Pull Request #105145
This remove default casses from the `switch` statements to catch where
the missing cases are.
Uncomment unimplemented cases for the sake of completeness. Improving the
overall API.
This make the format conversion lists exhaustive and documented.
This replace `validate_data_format_mtl` by the common version as they
don't differ at all now.
After 7eda9d8dda, crash occurs when operation search is called and no
active tree element is present. Add missing null check in new poll
function to fix the crash.
Pull Request #105004
For every other texture types this is expected to be implicitly
`GPU_DATA_FLOAT`. There is only one case where this is not the case.
I believe this was previously needed because the data type was
conditionning the texture creation. This is not the case anymore.
Zero-sized gizmos were not shown because GPU does not draw filled
triangles with zero area. This problem is resolved by drawing lines or
points in these degenerated cases.
Scaling is supported via computing the original and the new size, then
treat the case with zero original size separately, instead of only
computing the scale itself.
Actually applies to all `cage2d` gizmos, but not compatible when
translate flag is set.
After 49ad91b5ab, an extra visibility
toggle is being drawn for grease pencil layer in dopesheet. In this PR,
a condition is added to skip drawing of visibility toggle for GPencil
layer. Also, Grease pencil does not support pinning so restore the offset
added to channel for drawing the pin icon.
Pull Request #105080
This is a workaround for [issue #104087](blender/blender#104087). We encounter crashes when using shader binary archives on AMD, so this disables them while we investigate a proper fix. Kernels will still be cached automatically by the OS file system cache. This cache may occasionally be purged due to external factors, in which case kernels will get compiled again.
Pull Request #105186
If repository has multiple remotes with the same name of branch
checking out to the branch using simple `git checkout branch` exists
with an error: this is because there is ambiguity w.r.t which remote
to track.
Now the code explicitly provides remote to track, preferring to use
"origin" first (which is to be used for Blender style of workflow,
and Github style workflow when there is a fork available), and use
"upstream" if there is no origin.
Pull Request #105176
The preset names were translated before building the UI. This meant
that the translated name was passed to the operator responsible for
deleting the preset file, instead of the original name.
Pull Request #105155
The preset names were translated before building the UI. This meant
that the translated name was passed to the operator responsible for
deleting the preset file, instead of the original name.
Pull Request #105155
This was actually caused by two problems. The first is that the
code actually deliberately detects if nothing happened and pushed
an undo step, a bugfix for a problem that no longer exists.
The second was that SCULPT_test_location sometimes does a closest
point search instead of ray casting and didn't check the result
against the brush radius.
This might've been a merge error, the result of color mixing
was being overwritten by a simple copy of source to destination
inside of layerCopyValue_propcol.
Revert #104679. We are just too used to the old behavior, especially
the incorrect vertical clipping. Some uses rely on setting the min and
max of the clipping rect the same. Will have to revisit this later
to only correct for horizontal positioning for full hinting.
Pull Request #105157
Own Code.
In 6514bb05ea I misinterpreted the function's intended
behavior when there was already an existing active layer. The data from
the active layer is just meat to be copied, the function should always
add a new attribute.
Blender currently has 2 algorithms for merging vertices:
- `BKE_mesh_merge_verts`;
- `blender::geometry::create_merged_mesh`
`BKE_mesh_merge_verts` has a simplified algorithm to work with Array,
Mirror and Screw modifiers. It doesn't support merge results that would
create new faces. However it has shortcuts to be more efficient in
these modifiers.
`blender::geometry::create_merged_mesh` tries to predict all possible
outcomes. So it's a more complex. But it loses in performance to
`BKE_mesh_merge_verts` in some cases.
The performance comparison between these two depends on many factors.
`blender::geometry::create_merged_mesh` works with a context that has
only the affected geometry. Thus a smaller region of the mesh is read
for duplicate checking. Therefore, the smaller the affected geometry,
the more efficient the operation.
By my tests `blender::geometry::create_merged_mesh` beats
`BKE_mesh_merge_verts` when less than 20% of the geometry is affected
in worst case `MESH_MERGE_VERTS_DUMP_IF_EQUAL` or 17% in case of
`MESH_MERGE_VERTS_DUMP_IF_MAPPED` .
For cases where the entire geometry is affected, a 30% loss was noticed,
largely due to the creation of a context that represents the entire mesh.
Co-authored-by: Germano Cavalcante <germano.costa@ig.com.br>
Pull Request #105136
When using the frame channel operators from #104523
the framing would fail under the following circumstance.
* In the graph editor
* Using normalized view
* with a curve that has a y-extent of less than the focus threshold of 0.01
The issue was the the clamping code was
before the normalization multiplication.
Pull Request #105121
When using the "Frame Channel" operator in the Dope Sheet
the view would always go back to the top.
Fix it by copying the y bounds when in the Dope Sheet.
Pull Request #105123
Using spans instead of raw pointers helps to differentiate ararys from
pointers to single elements, gives bounds checking in debug builds, and
conveniently stores the number of elements in the same variable.
Also make variable naming consistent. For example, use `loops` instead
of `mloop`. The plural helps to clarify that the variable is an array.
I didn't change positions because there is a type mismatch between
C and C++ code that is ugly to manage. All remaining code can be
converted to C++, then that change will be simpler.
Pull Request #105138
This code seems to be left over from before edges, polys, and loops were
stored in CustomData. They are already copied by the CustomData copy
calls directly above, which already deal with every other layer.
Resolving builtin uniforms and uniform blocks when creating
shader interface. This maps builtin uniforms to uniforms
defined by the shader. Works the same as the OpenGL
builtin uniforms.
Pull Request #105128
When using ShaderCreateInfo with builtin uniform(blocks) there are
cases where the current implementation could not find an existing
block. The reason is that it uses name matching and name matching
requires that the shader inputs are sorted based on the name hash.
This change fixes this by first for the sorting of the shader
inputs before resolving the builtins.
Pull Request #105127
Cycles fallback display shader previously did not use viewport.
This would crash or cause the display not to show when using
GPU backends other than OpenGL, if another display shader
was unavailable.
Now use ShaderCreateInfo for Cycles fallback display.
Authored by Apple: Michael Parkin-White
Ref #96261
Pull Request #104987
This patch will give access to the physical device limits
of the device associated with the context. In vulkan each
device has different limits and the application is
responsible to match these limits as the vulkan driver
just ignores calls that don't match these limits.
Those limits are GPUBackend specific and therefore are not
added to GPU_capabilities.
Pull Request #105125
If the resolution attribute exists, it needs to be set to a non-zero
value for the newly added curves. While it might also make sense
to interpolate the value from neighbor curves, for now it's
simplest to just set it to the default value of 12.
Pull Request #105094
In curves edit mode, the "Move Texture Space" and "Scale Texture Space"
operators where shown in the "Curves > Transform" menu.
Since these are not implemented, the fix removes these operators
from the menu.
The code below has to handle the case when `sample_length` is greater
or equal to the total length already anyway, so we can just make that
a valid input. Currently, the snake hook brush for curves also makes
use of passing in larger sample lengths which current results in crashes
in debug builds.
When trying to rotate in curves edit mode using proportional editing
and connected only mode, Blender would crash.
This was because the `TransData` structs for disconnected elements
did not have the location field populated, resulting in a null pointer
access.
The fix skips these elements entirely using `TD_SKIP`.
This fixes issue [#105100](blender/blender#105100) where multi-pass renders can be incorrect due to kernels using stale specialisation constants (e.g. when rendering Pokedstudio).
This patch adds a new group of md5 hashes (`global_defines_md5`) to track whether the injected block of #defines is stale and regenerate the source string as appropriate. It also renames the existing group of md5 hashes from `source_md5` to `kernels_md5` to clarify that these refer to a specific kernel set rather than just the source (which might build an arbitrarily large number of kernel sets).
Pull Request #105103
The translation contexts module wasn't imported after c7611d61e8,
which caused an error and prevented some constraints' UI from being
displayed.
Pull Request #105095
Extend the `GRAPH_OT_paste` operator with an enum to define the value offset.
Options are:
| Option | Effect |
| ------------------- | ----------------------------------------------------------------------------- |
| No Offset | use the same key values as the copied keys |
| Cursor Value | align the leftmost key with the cursor value |
| Current Frame Value | Evaluate the curve under the cursor align the leftmost key with it |
| Right Key | Align the rightmost key with the first key that is to the right of the cursor |
| Left Key | Align the leftmost key with the first key that is to the left of the cursor |
Pull Request #104512
Before that patch, the slider operators for the Graph Editor are not easily accessible since they don't have a hotkey.
This adds the "d" hotkey for the already existing slider operator menu.
Using the popup menu means that your last used operator will always be under the cursor, so it's quick to access.
Pull Request #104530
This might've been a merge error, the result of color mixing
was being overwritten by a simple copy of source to destination
inside of layerCopyValue_propcol.
When implementing the operator to select linked vertices in weight paint mode, the new `AtomicDisjointSet` was used.
In order to keep the code consistent, and also prepare it to add things like Extending/Shrinking selection, the select linked faces logic was also updated.
It now also makes use of the `AtomicDisjointSet` by connecting all edges of each poly. In order to find connecting Faces you then have to check if edges of that poly share a connection.
Pull Request #104577
The stoke shader of grease pencil uses a geometry shader stage. Apple
devices don't support shaders with geometry shader stage. In the
OpenGL driver there was a pass-through implemented so it didn't fail.
When using the metal backend this needs to be solved more explicitly.
This change patches the grease pencil shader to support both the
backends supporting a geometry stage and those without.
Fixes#105059
Pull Request #105116
This was actually caused by two problems. The first is that the
code actually deliberately detects if nothing happened and pushed
an undo step, a bugfix for a problem that no longer exists.
The second was that SCULPT_test_location sometimes does a closest
point search instead of ray casting and didn't check the result
against the brush radius.
Complex EEVEE nodegraphs, particularly those combining
multiple principledBSDF shader nodes have a tendancy
to require a large number of simultaneous live registers
due to function call depth. In some instances, this
causes substantial performance drop and corruption if
the stack gets too large.
To mitigate this, splitting calls to closure_eval such
that only a single individual closure is evaluated in each
call reduces the number of live registers required. This
is preferred over using compound closure evaluation
functions which require a large amount of in-flight data.
Note that this is generally not more optimal, if the stack
does not spill, as there is an increased instruction count.
The specific trade-off depends on the exact architecture
in question. Hence, this is limited to AMD GPUs.
Authored by Apple: Michael Parkin-White
Ref #96261
Pull Request #104985
On the Windows platform, raise windows and give them focus as the mouse
hovers over them. This allows keyboard shortcuts for the area under the
mouse without having to click the window caption to make them active.
Pull Request #104681
66dda2b902 made an incorrect change to account for the special
case for NURBS. Instead, make the step that turns the lengths into
parameters more explicit, and pass the correct total length for each
curve, even in the cyclic case.
Pull Request #105079
This resulted in disappearing NURBS curves when joining them with other
curve types in some cases. The attribute has to be handles similarly to
the radius and resolution attributes rather than as simple generic data.
The attribute was retrieved when converting to Bezier curves when it
wasn't necessary. Instead copy it like a regular attribute if any of the
result curves are NURBS. Also fix a check for an empty span for the
attribute which was never false.
Invalid node trees (e.g. when nodes are linked in a cycle) can not be
evaluated and the viewer is not available in them. This commit just adds
some null checks to handle this case more gracefully.
Expose the color selector on each item in the list, so it's easier to see
at a glance the Bone Groups color theme and change it.
Also avoids having color widgets grayed out when not in Custom Colors mode.
Pull Request #105036
This is refering to drag & drop within Blender which is using the
drop-box system.
Previously Escape would cancel the dragging, but still pass on the event
to other event handlers, which could trigger other behavior. For example
cancelling dragging a file in a file browser dialog would also cancel
the file browser operation and close the window. Right-click didn't
cancel anything even though we usually use both Escape and right-click
as a way to cancel the operation.
Now both escape and right-click both cancel the dragging and the event
is not passed on further.
Pull Request: #104838
Do the domain check directly in the field input class to avoid the need
for another function to do it elsewhere. Also move one function to
be closer to a similar one, rename some functions, and avoid the need
for two intermediate span variables.
Erroneous cache warming case where the generated material is
identical to default material and cached shader is re-used,
resulting in case where the parent shader is identical to the
source.
Authored by Apple: Michael Parkin-White
Ref #96261
Originally caused by 6514bb05ea
More cases where the active/default color attributes were not set
correctly:
[1] Using the old Python vertex_colors API (vertex_colors.new)
[2] OBJ importer
[3] Collada importer
[4] Data Transfer layout (both standalone operator and "Generate Data
Layers" from the modifier)
Similar to 101d04f41f.
Brought over from https://archive.blender.org/developer/D16977, see
discussion there why some of the code for data transfer is not for the
genereal attribute API.
Pull Request #105020
Descriptor set locations are now determined in the
VKShaderInterface. Issues with the previous solution:
- Due to legacy code in GPU module the locations/bindings
must be the same. Using one for something else might
result in undesired lookups, incorrect resource
bindings.
- Images/Textures reuses the same namespace, that didn't
work as expected when looking up the resources via
its binding.
This refactoring is required for adding support for
push constants.
Pull Request #105073
This tools allows to change strip playback speed by manipulating
retiming handles. More handles can be added to single strip to create
variable playback speed.
This tool replaces Speed Factor property in time panel, with exception
of sound strips. Support for sound strips is still in review.
Pull Request #104523
Drawing code `paint_draw_smooth_cursor` would be called correctly, it
was just the color not being initialized.
This is usually done with `BKE_paint_init`, but in the case of curves
sculpting brushes this would create an additional (unnamed) brush which
should be avoided since the workspace toolsystem creates the "right"
brush anyways.
So this patch just does the minimal work to get the Stabilize Stroke
indicator line to draw (which is initializing the color).
Brought over from https://archive.blender.org/developer/D16793
(cherry picked from commit 612a4382c443bcd02e0bb5ffd1b1fdbb251f6e7b)
Pull Request #105021
Arrays for curve handle types were allocated even when there were no
Bezier curves. This saves 0.5ms of the total 0.9ms spent creating the
evaluated curve offsets, which happens every time the topology
of non-poly curves change.
Revert of commits that allowed non-temp Blender windows to be saved
and restored that spanned multiple monitors on the Windows platform.
This causes problems with temp windows (like Preferences & Render) that
cannot currently be fixed.
See 104956 for much more details.
This change is being redone after it was accidentally reverted.
Differential Revision: blender/blender#104956
Reviewed by Ray Molenkamp
msgfmt has a TBB dependency though bf_blenlib, now for a release build
The MSVC linker is smart enough to realize none of the TBB code is
actually used and discards it. In debug mode the linker is a bit more
conservative and doesn't, leaving msgfmt with a runtime dependency
on TBB. The problem here is, we only copy the runtime dlls during
the install phase, and msgfmt runs long long before that.
For this reason when we run msgfmt we should make sure any runtime
needs it could have are met in the path, there already is a handy
variable for that since oslc has similar requirements.
Pull Request #105048
Add mouse hover highlighting for items in UILists, in both list mode
and preview tile mode.
See 104677 for more details
Differential Revision: blender/blender#104677
Reviewed by Brecht Van Lommel
Write RNA properties backed by IDProperties with the `IDP_INT` type like
before ef68a37e5d. That keeps forward compatibility, because
earlier versions don't support the boolean type. At some point in a future
release we can remove the forward compatibility. 4.0 is a good time to
do that because forward compatibility will be broken in other ways.
This commit also adds support for reading integer arrays for boolean
property defaults, which was only half-way supported before.
Pull Request #104995
The light tree itself is disabled on the AMD GPUs due to a compiler issue.
There are couple of places where this was not fully checked:
- The `light_sample` function in the kernel.
- The light threshold during synchronization
The former one is solved as easy as just adding an ifdef block.
The latter one is solved by delaying the threshold assignment for
later on.
Pull Request #105022
This commit implements described in the #104573.
The goal is to fix the confusion of the submodule hashes change, which are not
ideal for any of the supported git-module configuration (they are either always
visible causing confusion, or silently staged and committed, also causing
confusion).
This commit replaces submodules with a checkout of addons and addons_contrib,
covered by the .gitignore, and locale and developer tools are moved to the
main repository.
This also changes the paths:
- /release/scripts are moved to the /scripts
- /source/tools are moved to the /tools
- /release/datafiles/locale is moved to /locale
This is done to avoid conflicts when using bisect, and also allow buildbot to
automatically "recover" wgen building older or newer branches/patches.
Running `make update` will initialize the local checkout to the changed
repository configuration.
Another aspect of the change is that the make update will support Github style
of remote organization (origin remote pointing to thy fork, upstream remote
pointing to the upstream blender/blender.git).
Pull Request #104755
This patch adds initial support for compute shaders to
the vulkan backend. As the development is oriented to the test-
cases we have the implementation is limited to what is used there.
It has been validated that with this patch that the following test
cases are running as expected
- `GPUVulkanTest.gpu_shader_compute_vbo`
- `GPUVulkanTest.gpu_shader_compute_ibo`
- `GPUVulkanTest.gpu_shader_compute_ssbo`
- `GPUVulkanTest.gpu_storage_buffer_create_update_read`
- `GPUVulkanTest.gpu_shader_compute_2d`
This patch includes:
- Allocating VkBuffer on device.
- Uploading data from CPU to VkBuffer.
- Binding VkBuffer as SSBO to a compute shader.
- Execute compute shader and altering VkBuffer.
- Download the VkBuffer to CPU ram.
- Validate that it worked.
- Use device only vertex buffer as SSBO
- Use device only index buffer as SSBO
- Use device only image buffers
GHOST API has been changed as the original design was created before
we even had support for compute shaders in blender. The function
`GHOST_getVulkanBackbuffer` has been separated to retrieve the command
buffer without a backbuffer (`GHOST_getVulkanCommandBuffer`). In order
to do correct command buffer processing we needed access to the queue
owned by GHOST. This is returned as part of the `GHOST_getVulkanHandles`
function.
Open topics (not considered part of this patch)
- Memory barriers & command buffer encoding
- Indirect compute dispatching
- Rest of the test cases
- Data conversions when requested data format is different than on device.
- GPUVulkanTest.gpu_shader_compute_1d is supported on AMD devices.
NVIDIA doesn't seem to support 1d textures.
Pull-request: #104518
Contributed by Yulia Kuznetcova at Apple.
NanoVDB is patched to give add address spaces required by Metal. We hope that
in the future Metal will support the generic address space.
For AMD and Intel this is currently not available since it causes a performance
regression also on scenes without volumes.
Pull Request #104837
Alternatively this could use `ASSET_LIBRARY_ALL` like
`add_node_search.cc`, but then it would need a different
method for skipping duplicate local assets.
Mandatory change for the Brush Assets project, from quick test does not
seem to break anything (more) in existing 'old' brushes...
Re. #101908.
Pull Request #105016
This adds support for cursor snapping for the new curves object.
It implements a function `transverts_from_curves_positions_create` (to separate the logic from the `Curves` object type). That function is then C wrapped by `ED_curves_transverts_create` and finally used in `ED_transverts_create_from_obedit`.
Pull Request #104967
Fixes the `-Winconsistent-missing-override` warning.
In theory the `virtual` is redundant in such case, but this is how
it is done in may other areas of USD code.
Pull Request #104977
Previously when markers were used, the newly introduced clamping code (#104516) would stop the last channel from being shown.
This patch fixes that by modifying the `v2d->tot.ymin` calculation.
This is a bit counterintuitive since the `v2d->tot` height is calculated in `action_draw.c`. But the advantage of doing it there is that it also works for the channels region.
Pull Request #104892
This does 2 things to address the ARM64 failures:
- Increases the threshold to be inline with what Cycles uses
- Disables the 2 problematic WebP variations (#105006 will track)
This adds saving and loading tests for our supported image formats.
**Saving - bf_imbuf_save.py**
There are 2 template images which are loaded anew for each file save
attempt. One is an 8-bit RGBA image and the other 32-bit. This is
required as many formats use a variety of factors to determine which of
`ibuf->rect` or `ibuf->rectfloat` to use for processing. The templates
are constructed to have alpha transparency as well as values > 1 (or
clamped to 1 for the case of the 8-bit template).
Test flow:
- Load in an appropriate template image
- Save it to the desired format with the desired set of options
- Compare against the reference image
Notes:
- 98 references are used totaling ~3.6MB
- 10-12 second test runtime
- Templates can be reconstructed with the create-templates.blend file
**Loading - bf_imbuf_load.py**
Test flow:
- Load in each of the reference images
- Save them back out as .exr
- Save additional metadata to a secondary file (alpha mode, colorspace etc)
- Compare the saved out .exr with another set of reference .exrs
- Compare the saved out file metadata with set of reference metadata
Notes:
- 98 exr references are used totaling ~10MB
- 10-12 second test runtime as well
A HTML report is not implemented. The diff output organization is very
similar to the other tests so it should be somewhat easy to do in the
future if we want.
The standard set of environment variables are implemented for both:
BLENDER_TEST_UPDATE, BLENDER_VERBOSE, and BLENDER_TEST_COLOR
Pull Request #104442
Added new function sculpt_mesh_filter_cancel in sculpt_filter_mesh.cc
for cancelling mesh filters. It currently is unused pending a
revamped modal map for mesh filter (see pull req 104718).
In the outliner, the icons for modifiers are tinted blue. This didn't
work for the geometry nodes modifier icon.
Defining the icon with the macro `DEF_ICON_MODIFIER` also
defines the appropriate theme color so it's now tinted blue
when drawn in the outliner like the other modifier icons.
Pull Request #104957
Add a per node type callback for creating node add search operations,
similar to the way link drag search is implemented (11be151d58).
Currently the searchable strings have to be separate items in the list.
In a separate step, we can look into adding invisible searchable text
to search items if that's still necessary.
Resolves#102118
Pull Request #104794
Add `BLI_change_working_dir(path)` to change the current working directory.
This change is required for adding USDZ support to Blender. When exporting to that format, we are required to do a weird change of directory because of a quirk with the USD library's USDZ functionality. If an absolute filepath is passed into the `UsdUtilsCreateNewUsdzPackage` function, the USDZ archive will store that full path.
macOS uses `NSFileManager` through some new Mac-only wrapper functions.
Ref #99807
Pull Request #104525
The check was triggering the 'this' pointer cannot be null in
well-defined C++ code
We do not check for this pointer in any other areas. If it is
needed due to possible opaque pointer cast to the check prior
to the cast.
Pull Request #104974
That way the `matrix_base` doesn't need to depend on the axis
simplifying the code.
This also fixes an issue in plane scaling gizmos with non-orthogonal
matrix.
After rBdb87e2a638f9, two contexts were missing:
- VirtualReality, to be used in an add-on
- Constraint, used in the constraints UI
The latter was actually used without being added, which caused errors.
It was reverted in rB31a640027982.
The operator's description used a format string like:
```
BLI_sprintfN(TIP_("%s %s vertex groups of the active object"),
action_str, target_str)
```
which is almost guaranteed to be impossible to properly localize to
some languages -- I know there are a couple of issues for French
already.
So instead of hoping formatting works, write all possible strings
explicitly, even if it looks stupidly verbose.
Simplify modifier sample mode didn't transfer UV parameters, now fixed.
(This is the corrected commit, previous one has multiple other commits merged.)
Pull Request #104964
This reverts commit 19222627c6.
Something went wrong here, seems like this commit merged the main branch
into the release branch, which should never be done.
Currently Metal is more stable then the OpenGL backend on apple
devices. Also the Metal backend supports more features then the
OpenGL backend. For example the viewport compositor and rendering
of production files.
This has been validated with users and studios.
This patch will default to the Metal backend when starting
Blender 3.5 for the first time or when loading factory startup. It
is still possible to switch to OpenGL via the user preferences.
It will not automatically select the Metal backend when there is
already user preferences available for Blender 3.5.
No design or functional changes. Just rename the layers for the last
two icons that were added so that they follow the naming pattern.
Also, update the layer order for another icon (was not alphabetic).
Pull Request #104954
This is a missing part of the Metal backend. Metal backend doesn't
support the bgl commands, but it was not possible to use the gpu
module to use scissor testing.
Without this change addon developers would not be able to migrate
their addons to support the Metal backend.
This patch adds:
- `gpu.state.scissor_set`
- `gpu.state.scissor_get`
- `gpu.state.scissor_test_set`
Fix#104911
Texture clamping is by default off, but for VDM textures this leads
to several artifacts.
- Clamping is done when the image is sampled and when the brush strenght
is applied.
- VDM textures have negative values that are lost due to clamping
when clamping during sampling.
This patch fixes this by changing the default clamping of newly
created textures to not clamp anymore.
Textures are mostly being used by sculpt brushes, where clamping is also
implemented on brush level.
Fix#104747
Revert of commits that allowed non-temp Blender windows to be saved
and restored that spanned multiple monitors on the Windows platform.
This causes problems with temp windows (like Preferences & Render) that
cannot currently be fixed.
See 104956 for much more detail
Differential Revision: blender/blender#104956
Reviewed by Ray Molenkamp
Regression in [0] which caused interacting with 2D gizmos not to
update 3D gizmos once the gizmo finished it's modal interaction.
This caused the cameras lens gizmo not to update when navigating using
the viewport navigation buttons.
Resolve by detecting this case and flagging other draw steps to be
updated.
[0]: fb27a9bb98
Caused by 25237d2625, when the new "template" mesh created
in the modifier started to use the proper default value for CD_ORIGINDEX
layers rather than just zero. Zero isn't correct because it refers to
the first element, not "no element". For that we need to remove the
original index mapping arrays completely. There is some gray area
about whether that is allowed too, but it's best here to just keep the
old behavior working for now.
Add the `CD_ORIGINDEX` layer to the columns potentially displayed
with the Blender debug value of 4001 from the debug menu. Also
separate the debug columns to separate functions.
In the first loop is safe to remove the current element.
The second loop can remove any element, potentially the next.
This triggers a read after freed.
Pull Request #104897
When the new UV to legacy format conversion happens, the mesh is in
the middle of being written and is an at best "complicated", at worst
invalid state. The attribute API looks at other domains and is a bit
less forgiving in that respect, and shouldn't really be used here. Use
the CustomData API instead. Also sort the layers the same way as
b642dc7bc7.
Note that the node group has its sockets names translated, while the
built-in nodes don't. So we need to use data_ for the built-in nodes
names, and the sockets of the created node groups.
Pull Request #104889
This reverts commit 68181c2560.
I merged 3.6 into 3.5 by mistake. Basically I had a PR against main,
then changed it in the last minute to be against 3.5 via the
web-interface unaware that I shouldn't do it without updating the
patch.
Original Pull Request: #104889
Note that the node group has its sockets names
translated, while the built-in nodes don't.
So we need to use data_ for the built-in nodes names,
and the sockets of the created node groups.
Pull Request #104889
When animating it is often useful to frame the Graph Editor/Dope Sheet to whatever frames are in a given channel.
This patch adds the option to frame on selected channels OR frame on whatever channel is under the cursor.
If a preview range is set it will only focus on keys in that range.
Supports FCurve and keyframe data
Frame to selected is called with
* Right click in the channel section -> Frame Selected Channels
* or in Channel → Frame Selected Channels
* or hitting . on the numpad
Frame to channel under cursor is done with
ALT + Middle Mouse Button
Co-authored-by: Christoph Lendenfeld <chris.lenden@gmail.com>
Pull Request #104523
Finding the documentation for nodes can be time consuming.
By adding the online manual to the right click context menu in the node
editor the user gets easier access to the documentation.
Can also be used by custom nodes add-ons by registering a manual-map.
Pull Request #104833
When updating a mesh, the GPU Subdivision code makes calls to
`GPU_indexbuf_bind_as_ssbo()`.
This may cause the current VAO index buffer to change due to calls from
`glBindBuffer(GL_ELEMENT_ARRAY_BUFFER, ibo_id_)` in
`GPU_indexbuf_bind_as_ssbo()`.
The solution is to unbind the VAO (by calling `glBindVertexArray(0)`)
before creating the index buffer IBO.
Co-authored-by: Germano Cavalcante <grmncv@gmail.com>
Pull Request #104873
Apparently, the 65bit Intel architecture is presented differently
on Linux and Windows.
Allow both variants for the command line, so that semantically the
command line argument can be seen as a lower case platform.machine.
When updating a mesh, the GPU Subdivision code makes calls to
`GPU_indexbuf_bind_as_ssbo()`.
This may cause the current VAO index buffer to change due to calls from
`glBindBuffer(GL_ELEMENT_ARRAY_BUFFER, ibo_id_)` in
`GPU_indexbuf_bind_as_ssbo()`.
The solution is to unbind the VAO (by calling `glBindVertexArray(0)`)
before creating the index buffer IBO.
Co-authored-by: Germano Cavalcante <grmncv@gmail.com>
Pull Request #104873
Possible values are x86_64 and arm64.
Allows to use make_update.py in a cross-compile environment, like
building x86_64 macOS Blender from Apple Silicon machine.
Pull Request #104863
In the Dope Sheet and the Timeline, it was possible to drag the view until the keyframes were completely out of view.
(Important to drag in the region with the keyframes, dragging in the channel box already did clamping)
This patch adds a clamping mechanism matching that of the channel box. That means the last channel will stick to the bottom of the view.
Co-authored-by: Christoph Lendenfeld <chris.lenden@gmail.com>
Pull Request #104516
Fix a crash when using the Euler Filter from the Graph Editor on baked curves.
The crash happened because baked curves have no bezt array.
Skipping any curves where that was missing fixes the issue.
Co-authored-by: Christoph Lendenfeld <chris.lenden@gmail.com>
Pull Request #104858
3.2 and 1.6 where used as rough equivalents to M_PI & M_PI_2, however
this raised questions about the significance of these values.
Running thousands of tests with generated euler inputs I wasn't able to
detect a difference so use M_PI & M_PI_2 instead.
Fix a crash when using the Euler Filter from the Graph Editor on baked curves.
The crash happened because baked curves have no bezt array.
Skipping any curves where that was missing fixes the issue.
Co-authored-by: Christoph Lendenfeld <chris.lenden@gmail.com>
Pull Request #104858
According to the report it is a regression since 3.2, but it is tricky
to pin-point which exact commit caused it.
The root of the issue is that under certain circumstances frame might
be read and processed twice, depending on the order in which panels and
the main area is drawn: the footage information panel skips cache, so
it it is drawn prior to the main area it leads to 2 frame reads. Opening
the Metadata panel triggers code path which forces frame to be put to
the cache, solving the double frame read.
Solution is simple: do not skip cache when acquiring image buffer for
the footage information: the same frame will be needed for the main
area as well.
Pull Request #104860
On a user level there are no expected changes, other than being able
to update submodules and libraries from a main repository at a detached
HEAD situation (which did not work before).
On the infrastructure level of things this moves us closer to ability
to use the main make_update.py for the buildbot update-code stage, and
to remove the update-code section from the pipeline_config.yaml.
The initial idea of switching make_update to the pipeline config did
not really work, causing duplicated work done on blender side and the
buildbot side. Additionally, it is not easy to switch make_update.py
to use pipeline_config.yaml because the YAML parser is not included
into default package of Python.
There will be few more steps of updates to this script before we can
actually clean-up the pipeline_config: the changes needs to be also
applied on the buildbot side to switch it to the actual make_update.
Switching buildbot to the official make_update.py allows to much more
easily apply the submodules change as per #104573.
Having a threshold well above PI would result in discontinuity in some
cases.
The discontinuity can be measured by generating euler values (both
random and interpolated rotations), then comparing the accumulated
difference.
Changing the threshold for wrapping rotations produces at least as good
or more compatible results.
This was reported as #17297 and fixed in [0], however the change was
only applied for the game-engine.
Ref !104856
[0]: ab44742cf3
This was broken even before 0649e63716 and was always expanding the
`Image`, not the movie clip (even if the source was set to
`CAM_BGIMG_SOURCE_MOVIE`)
Now the rule here seems to be to always expand unconditionally, so
remove checking the source and always expand image and movie clip.
Co-authored-by: Philipp Oeser <philipp@blender.org>
Pull Request #104815
* Repeat last operator now works for mesh filters.
* Added an iteration_count property to repeat the filter.
This is especially useful when compounded with the repeat
last operator tool.
* The mouse event history is stored for mesh filters
with more advanced user input (mostly Smooth and Relax
filters).
meson defaults to debug builds [0] unless you tell it differently, this
diff changes the options for
- epoxy
- fribidi
- harfbuzz
- wayland
- wayland_protocols
to be optimized, mesa was already optimized
[0] https://mesonbuild.com/Builtin-options.html#core-options
Pull Request #104802
Passing a `BitSpan` is generally better because then the caller is not
forced to allocate the bits with a `BitVector`. Also, the `BitSpan` can
be stored in the stack, which removes one pointer indirection compared
to accessing bits through a `BitVector &`.
This adds `BitSpan` and `MutableBitSpan`. They work essentially the same as
the normal `Span` and `MutableSpan`, but work on individual bits instead
(the smallest type `Span` can handle is one byte large).
This also splits up `BLI_bit_vector.hh` and introduces two new headers:
`BLI_bit_ref.hh` and `BLI_bit_span.hh`.
The goal here is to make working with dynamically sized bit masks more
convenient. I'm mainly working on this because I might want to use this
in #104629. It can also be used to cleanup function signatures that
currently take a reference to a `BitVector`. Like with `Span` vs. `Vector`,
it is better to pass a `BitSpan` to function than a `const BitVector &`.
Unit tests for the new code are included.
Pull Request #104671
Cycles uses the "split faces" mesh function to support sharp edges
and auto-smooth. However, 75ad8da1ea updated that
function to ignore the edges that are explicitly tagged as sharp and
only use the edge angle. Fix by taking the attribute into account too.
The custom data layer mappings from dfacaf4f40 were created
*before* the BMesh shape key layers were added, invalidating the BMesh
data offsets they stored. Fix by creating the mappings after all layers
have been created.
Clean up logic to make it more clear and formalize the way to choose
fixed node data type based on operation. This make possible to more
easily fix wrong node data type for color type and less than ops.
Pull Request #104617
Fix: The BKE_nlatrack_remove_and_free (#104752) unit test leaks a little memory. Cleaning up the rest of the track list to ensure everything is freed.
Co-authored-by: Nate Rupsis <nrupsis@gmail.com>
Pull Request #104839
This PR adds 2 new methods:
* BKE_nlatrack_remove
* BKE_nlatrack_remove_and_free
and modifies the existing `BKE_nlatrack_free` to remove the track list parameter.
This refactor splits out the removal / freeing into it's own methods, and provides a higher order method (BKE_nlatrack_remove_and_free) to conveniently call both.
Co-authored-by: Nate Rupsis <nrupsis@gmail.com>
Pull Request #104752
When appending assets it often isn't expected for the asset tags and
meta-data to be included. Add an option to the append operator to
disable appending the asset data, exposing existing internal options.
This adds the "Select More/Less" operators for Curves. Both operators use the `select_adjacent` function to (de)select adjacent points.
Pull Request #104626
Code to set the dragging data for a button was mostly duplicated, they
share it now. The followup commit also needs an easy way to reuse the
logic, which is possible now.
No longer use the existance of an image pointer inside the button, or
the the type of a button to decide if the entire button should be
draggable, or only its icon. This was rather sneaky, undocumented
behavior. Instead make this a proper option in the public UI API, and
enable it by default in specific cases to match the previous behavior.
This at least makes the behavior known and controllable in the API, and
not something that's just "secretly" done deep down in the button
handling code. I'd argue we should just use the entire button width by
default for dragging, but that would be a bigger change.
When the users click the "Mark as Asset" with the mouse hover the fake
user button, the button was not refreshed. In fact, the areas are not
listening to the "NC_ID NA_EDITED", which is the signal emitted after
an asset is marked/unmarked. Because of this, the areas aren't redrawn
(especially the ID buttons).
This little patch adds the event listening for the areas where this
problem is happening node editor and properties editor.
Pull Request #104694
After the removal of the "normal" attribute providers, we no longer
use the concept of read-only attributes. Removing this status simplifies
code, clarifies the design, and removes potentially buggy corner cases.
Pull Request #104795
The "normal" was added before fields existed because we needed a
way to expose the data to geometry nodes. It isn't really an attribute,
because it's read-only and it's derived rather than original data.
No features have relied on the "normal" attribute existing, except
for the corresponding column in the spreadsheet. However, the
column in the spreadsheet is also inconsistent, since it isn't an
attribute but looks just like the other columns. The normal is
always visible in the spreadsheet.
Pull Request #104795
* Fix#92539: Hard to read the breadcrumbs.
* Fix View Item active, hover, and text color (e.g. count numbers in the
Spreadsheet were almost unreadable).
* Fix mismatching node type colors with the default theme.
Blender Light is meant to be simply a brighter version of the default,
so screenshots and tutorials can be followed with both themes.
* Use the same outline color for widgets, so they match when aligned in a row.
* Make panels standout (not fully transparent), like in the default theme.
The active tools in `_defs_curves_sculpt` don't use names that are
exactly the same as the corresponding brush name with "builtin_brush."
at the beginning, instead they use more standard identifiers without
capitals or spaces.
The "brush_select" utility operator assumed the names matched though.
That can be fixed by manually mapping the brushes to the active tools.
Pull Request #104792
The keymap name in `WM_keymap_guess_from_context` didn't match the
name of the keymap in the Blender default keymap (`km_sculpt_curves`).
Fix by changing the utility function to match the keymap name.
Before right clicking on any tool in curves sculpt mode gave an assert,
now it shows a context menu.
Pull Request #104791
In BKE_screen_area_map_find_area_xy (find a ScrArea by 2D location),
ignore edges by using screen verts instead of totrct
Differential Revision: blender/blender#104680
Reviewed by Brecht Van Lommel
Lookup cache was not invalidated, to update attached effects position, a handle
of a input strip is touched.
To update attached effects, currently the code only does that when strip
position is changed. This is, because effect strip updating is done internally
in sequencer module code and ideally shouldn't be done at all. A TODO comment
with further explanation is added.
On the Windows platform allow Blender windows to be created that are
spread over multiple adjacent monitors.
---
On Windows we are quite feature-complete and stable for the creation and placement of multiple (non-temp) Blender windows. We correctly do so across multiple monitors no matter their arrangement, resolution, and scale.
However, there is another way that Blender could use multiple monitors - suggested by a core dev - which is to size a window so that it comprises multiple monitors. There are some advantages to this way of working because the one window remains constantly active and in focus. It also allows a single region (like a node editor) to be as large as possible.
But this way of working is not currently possible. That is because during window creation we constrain them to fit within the confines of the nearest single monitor. This has mostly been done for simplicity and safety. We don't want to restore a saved window to a position where it cannot be seen or used.
This patch addresses that. It allows windows to span multiple monitors, and does so safely by constraining the four corners of the window to be within the working area of any active monitor. This means it allows the creation of single windows as shown below in blue (left two), but does not allow the one in orange (right):
Note this has been previously (before gitea) reviewed and approved by Brecht.
Co-authored-by: Harley Acheson <harley.acheson@gmail.com>
Pull Request #104438
Avoid running out of attributes when multiple material slots use the same one.
Cleanup:
Removes the return value from drw_attributes_add_request since it shouldn't be modified afterward and it's never used.
Avoid making copies of DRW_AttributeRequest in drw_attributes_has_request.
Co-authored-by: Miguel Pozo <pragma37@gmail.com>
Pull Request #104709
Now that the UV map names are read from the evaluated mesh the names of
the anonymous layers would show up in the UV Map node and be accessible
via the python interface.
This changes the collection definition to skip anonymous layers.
Pull Request #104783
Instead of retrieving which attributes to transfer from the geometry set
which exists at a different abstraction level, get them from accessors
directly with a newer utility function. This removes boilerplate code
and makes the logic clearer for a future even more generic attribute
propagation API.
The evaluated positions cache can live longer than a specific
`CurvesGeometry`, but for only-poly curves, it pointed to the positions,
which are freed when the curves are. Instead, use the same pattern
as the evaluated offsets and don't store the positions span, just return
it when retrieving evaluated positions.
The evaluated positions cache can live longer than a specific
`CurvesGeometry`, but for only-poly curves, it pointed to the positions,
which are freed when the curves are. Instead, use the same pattern
as the evaluated offsets and don't store the positions span, just return
it when retrieving evaluated positions.
There are known bugs in HIP compiler that are causing random build failures
when making changes to the Cycles kernel. This is preventing developers from
efficiently making improvements to Cycles.
For now Cycles AMD GPU rendering is disabled in Blender 3.6 until a good
solution is found, so that ongoing work like Principled v2 is not blocked.
We hope this can be resolved later on in the 3.6 release cycle.
Ref #104786
This reverts 1116d821dc and part of 5bac672e1a.
The solution was made specifically for the 3.5 release, to avoid
breaking other cases. The previous commit addressed the problem properly
by letting the general menu code align labels where needed.
Usually in Blender, we try to align the labels of items within a menu,
if necessary by adding a blank icon for padding. This wasn't done for
menus generated from enum properties (RNA or custom property enums). Now
we do it whenever there is at least one item with an icon.
Since the menu doesn't automatically align the labels like other menus
and pulldowns in Blender, I manually made them align using the blank
icon. However the menu button would also include this blank icon now.
This is a specific fix for the 3.5 release. In the main branch I will
replace it with proper support for automatically aligning labels in such
menus.
Since the menu doesn't automatically align the labels like other menus
and pulldowns in Blender, I manually made them align using the blank
icon. However the menu button would also include this blank icon now.
This is a specific fix for the 3.5 release. In the main branch I will
replace it with proper support for automatically aligning labels in such
menus.
* BLENDER_VERSION_CYCLE set to beta
* Update pipeline_config.yaml to point to 3.5 branches and svn tags
* Update and uncomment BLENDER_VERSION in download.cmake
Usually when a menu item displays an icon, we indent all other items
with an empty icon so items align nicely. Now with more built-in asset
libraries (the new "Essentials" library), this inconsistency becomes
more apparent.
Also add a separator line between the "All" asset library and the
others, makes the menu look more organized.
The Preferences for asset libraries are becoming more than a simple name
+ path. E.g. there is now an Import Method options, and we previously
also considered a Relative Paths option (which we may still want to
add). The previous UI, while consistent with the Auto Run Python Scripts
UI isn't well suited for less than trivial cases. Using UI lists makes
the UI more scalable and follows usual list UI patterns more. There is
also more space for the path button now.
Part of #104686.
The default import method for an asset library can now be determined in
the Preferences. The Asset Browser has a new "Follow Preferences" option
for the importing. The essentials asset library still only uses "Append
(Reuse Data)".
This is part of #104686, which aims at improving the import method
selection, especially for the introduction of the new essentials library
(which doesn't support certain import methods). Further changes are
coming to improve the UI, see #104686.
Pull Request: #104688
The quick fur operator now uses the new hair system. It adds a new
curves object for every selected mesh, and adds geometry nodes
modifiers from the essentials assets that generate curves. A few
settings are exposed in the redo panel, including an option for whether
to apply the modifier to generate the initial curves so that there is
original editable data.
The point of the operator is to give people a sense of how to use the
node groups and to give a very fast way to build a basic setup for
further tweaking.
Pull Request #104764
Use the right hand side selection, as it fits the typical workflow
the best.
Arguably, the same would need to be done for the k-shortcut, but
that is another issue to be tackled. As well as making the selection
active.
Pull Request #104777
We (Dalai, Hans, Falk, Simon and me) decided that the curves edit mode
is useful enough to justify moving it out of experimental now. So far it
supports the following features:
* Various selection tools. The selections are synced with sculpt mode.
* Transform tools.
* Delete curves/points.
More functionality of the old curve edit mode will be ported over in
future releases.
This implements the delete operator in curves edit mode. The behavior
is similar to the delete operator in the edit mode of legacy curves,
i.e. it's actually dissolving and doesn't split curves. This is also
the behavior that we generally want for the hair use case.
The operator is added to the `Curves` menu and can be accessed via
the keyboard using `X` or `Del`.
Pull Request #104765
This adds a new `Curve Falloff` popover to the comb brush tool settings.
The curve control allows changing the brush weight along the curve to
e.g. affect the tip more than the root. This is a relative way to get
something like stiffness for short hair.
This functionality could potentially be added to some other brushes,
but the comb brush is the most important one, so that is added first.
I did add the buttons add the buttons to choose a curve map preset.
However, I did not add the preset dropdown, because that just adds
some unnecessary complexity in the code now and is redundant.
Pull Request #104589
This patch adds a simple operator to set values of the active
attribute for the selected element. The aim is to give simple control
over attribute values in edit mode rather than to provide the fastest
workflow for most cases. Eventually this operator might be less
important compared to more advanced attribute editing tools, but for
now, exposing a little bit of functionality is low hanging fruit and
will help to see the possibilities.
The implementation mostly consists of boilerplate to register the
necessary property types for the operator and draw their UI.
Beyond that, we just loop over selected elements and set a value.
Pull Request #104426
Caused by strips being flagged for removal, but the flag was never
cleared. As far as I can tell, this issue is not reproducible anymore,
but there may be files with this flag still set.
overlay_uniform_color_clipped was inheriting from overlay_depth_only, which doesn't
make much sense.
I've changed it to inherit from overlay_uniform_color instead, which is consistent
with other \*\_clipped variants of shaders.
Pull Request #104761
Certain material node graphs can be very expensive to run. This feature aims to produce secondary GPUPass shaders within a GPUMaterial which provide optimal runtime performance. Such optimizations include baking constant data into the shader source directly, allowing the compiler to propogate constants and perform aggressive optimization upfront.
As optimizations can result in reduction of shader editor and animation interactivity, optimized pass generation and compilation is deferred until all outstanding compilations have completed. Optimization is also delayed util a material has remained unmodified for a set period of time, to reduce excessive compilation. The original variant of the material shader is kept to maintain interactivity.
Also adding a new concept to gpu::Shader allowing assignment of a parent shader from which a shader can pull PSO descriptors and any required metadata for asynchronous shader cache warming. This enables fully asynchronous shader optimization, without runtime hitching, while also reducing runtime hitching for standard materials, by using PSO descriptors from default materials, ahead of rendering.
Further shader graph optimizations are likely also possible with this architecture. Certain scenes, such as Wanderer benefit significantly. Viewport performance for this scene is 2-3x faster on Apple-silicon based GPUs.
Authored by Apple: Michael Parkin-White
Ref T96261
Pull Request #104536
The logic for looping over imported OBJ faces and checking whether any
of them are "invalid" (duplicate vertices) was wrongly skipping
validation of the next face right after some invalid face. It
was the previously invalid face, moving the last into its place,
but then the loop was incrementing the face index and that just-moved
face was not properly validated.
Fixes#104593 - importing attached obj file (which contains some faces
that have duplicate indices). Added test coverage with a much smaller
obj file.
When the attribute doesn't exist, the node should give the default
of 12, as defined by the accessor method for `bke::CurvesGeometry`.
Pull Request #104674
This better aligns with OSX/Linux warnings.
Although `__pragma(warning(suppress:4100))` is not the same as
`__attribute__((__unused__))` in gcc (which only affects the attribute
instead of the line), it still seems to be better to use it than to
hide the warning entirely.
As described in #104171, add an operator that creates a new node group
that contain the current node group and named attribute nodes to deal
with the outputs. This saves manual work when moving a high-level
modifier to the node editor for better procedural control.
Pull Request #104546
This adds a new overlay for curves sculpt mode that displays the curves that the
user currently edits. Those may be different from the evaluated/original curves
when procedural deformations or child curves are used.
The overlay can clash with the evaluated curves when they are exactly on top of
each other. There is not much we can do about that currently. The user will have
to decide whether the overlay should be shown or not on a case-by-case basis.
Pull Request #104467
This renames `data` and `color` to `selection`. This is better because
it's actually what the corresponding buffers contain. Using this
more correct name makes sharing vertex buffers between different
gpu batches for different shaders easier.
The "current file" mode is only useful when creating new assets.
However, the far more common use case and the one that should require
fewer steps is to use existing assets.
There is a risk that this causes freezing if the file browser preview
caching does not work properly. So we'll have to keep an eye on the bug
tracker to see if this is an issue in practice.
Pull Request #104749
This patch adds an "Essentials" asset library that is bundled with Blender.
Also see #103620. At build time, the `lib/assets/publish` folder is copied
to `datafiles/assets` in the build directory.
In the UI, the "Essentials" library can be accessed like other custom asset
libraries with the exception that assets from that library cannot be linked.
The immediate impact of this is that Blender now comes with some geometry
node groups for procedural hair grooming.
Pull Request #104474
The OBJ spec (page B1-17) allows "l" entries to specify
polylines with more than 2 vertices, optionally with texture
coordinates.
Previously, only the first 2 vertices of each polyline
were read and added as loose edges, failing when texture
coordinates were present.
This adds support for proper polylines, reading but ignoring
texture coordinates.
Pull Request #104503
In 161908157d we moved all warnings
coming out of the library folder to /W0 as many of them do not follow
our code-style nor can we force them to.
When i made this change, i took `/external:templates-` to mean
"and that goes for you too, templates" and it decisively does the
opposite leading to /W3 warnings coming out of openvdb
This change removes the flag as it should have never have been added
in the first place.
Sculpt: Added vector displacement for the sculpting draw brush (area plane mapping only for now)
Vector displacement maps (VDM) provide a way to create complex displacements that can have overhangs in one brush dab.
This is unlike standard displacement with height maps that only displace in the normal direction.
Forms like ears, curled horns, etc can be created in one click if VMDs are used.
There is a checkbox on the draw brush in the texture settings "Vector Displacement" that enables/disables this feature.
Technical description: The RGB channels of a texture in a brush stroke are read and interpreted as individual vectors, that are used to offset vertices.
As of now, this is only working for the draw brush using the area plane mapping. Symmetry and radial symmetry are working.
A few things to consider when making VD-Maps:
* UVs need to stay intact for the bake mesh (e.g. voxel remeshing can't be used to create VD Meshes)
* When exporting a VD Map it should be in the file format OpenEXR (for positive and negative floating point values).
* Export resolution can be 512x512 or lower (EXR files can get very large, but VDM brushes don't need a high resolution)
And when using them:
* Inside Blender clamping needs to be unchecked on the texture
* The brush falloff should be set to constant (or nearly constant)
This patch was inspired by this [right-click-select proposal](https://blender.community/c/rightclickselect/WqWx/) Thanks for the post!
(Moved [this patch](https://archive.blender.org/developer/D17080) to here.)
Co-authored-by: Robin Hohnsbeen <robin@hohnsbeen.de>
Pull Request #104481
Curve type counts are updated eagerly but it was missing in this
node leading to a crash further down the line where the counts
were expected to be correct.
`MEM_delete()` is designed for type safe destruction and freeing, void
pointers make that impossible.
Was reviewing a patch that was trying to free a C-style custom data
pointer this way. Apparently MSVC compiles this just fine, other
compilers error out. Make sure this is a build error on all platforms
with a useful message.
The Volume property of the Maintain Volume constraint was marked as a
distance, which made it confusing--especially with non-metric units.
The volume can actually be understood as a factor of the initial
volume, so it should be dimensionless.
Additionally, the volume had a range of 0.001 to 100.0. This is wide
enough in most cases, but sometimes you may need to go orders of
magnitude higher or lower to consider vast or thin objects, and there
should be no drawback to extending the limits, provided they stay
positive.
Pull Request #104489
The proper fix (bb9eb262d4) caused compilation problems with HIP, so we're
delaying it until 3.6.
To fix the original bug report (#104586), this is a quick workaround that'll
hopefully not upset the compiler.
Pull Request #104723
A properly authored USD file will have the extent attribute authored on all prims conforming to UsdGeomBoundable.
This cached extent information is useful because it allows the 3D range of prims to be quickly understood without reading potentially large arrays of data. Note that because the shape of prims may change over time, extent attributes are always evaluated for a given timecode.
This patch introduces support for authoring extents on meshes and volumes during export to USD.
Because extents are common to multiple kinds of geometries, the main support for authoring extents has been placed in USDAbstractWriter, whose new author_extent method can operate on any prim conforming to pxr::UsdGeomBoundable. The USD library already provides us the code necessary to compute the bounds for a given prim, in pxr::UsdGeomBBoxCache::ComputeLocalBound.
Note that not all prims that are imageable are boundable, such as transforms and cameras.
For more details on extents, see https://graphics.pixar.com/usd/release/api/class_usd_geom_boundable.html#details.
Note that when new types of geometries are introduced, such as curves in https://developer.blender.org/D16545, we will need to update the USD writer for that geometry such that it calls this->author_extent.
Update on Feb 2: This patch has been updated to include a unit test to ensure authored extents are valid. This test requires new test assets that will need to be submitted via svn. The test assets are attached in the d16837_usd_test_assets.zip file. To use, unzip and merge the contents of this zip into the lib/tests/usd folder.
This unit test also addresses #104269 by validating compliance of exported USD via UsdUtils.ComplianceChecker.
Pull Request #104676
Use a MAKE wrapper for 'make deps' on Linux that ensures dependencies
are built one at a time. This is preferable because building many
dependencies at once made troubleshooting impractical and had the
downside that large deps such as LLVM would bottleneck on a single core.
This may be used for macOS, so far it's only tested on Linux.
- Correct broken link for undocumented modules.
Point to the contributing page, it seems #51062 was lost with the
GITEA task migration.
- Correct Blender Version link to the SHA1.
Matching the RNA id's to the search pattern is slow because
of the function `fnmatchcase`. This patch first checks the string
prefix without any special characters used by fnmatch,
if the `startswith` check fails, there is no need to check `fnmatchcase`.
Before the optimization, an online manual lookup took about 400ms
which is quite noticeable, with this patch applied it's under 10ms.
Ref !104581.
The internal compiler error appears to be gone. Unclear why it appeared in the
first place and why it's gone now. Just random kernel code changes causing it.
Pull Request #104719
- Rename roughness variables for more clarity - before, the SVM/OSL code would
set s and v to the linear roughness values, and the setup function would over-
write them with the distribution parameters. This actually caused a bug in the
albedo code, since it intended to use the linear roughness value, but ended up
getting the remapped value.
- Deduplicate the evaluation and sample functions. Most of their code is the
same, only the middle part is different.
- Changed albedo computation to return the sum of the intensities of the four
BSDF lobes. Previously, the code applied the inverse of the color->sigma
mapping from the paper - this returns the color specified in the node, but
for very dark hair (e.g. when using the Melanin controls) the result is
extremely low (e.g. 0.000001) despite the hair still reflecting a significant
amount of light (since the R lobe is independent of sigma). This causes issues
with the light component passes, so this change fixes#104586.
- There's quite a few computations at the start of the evaluation function that
are needed for sampling, evaluation and albedo computation, but only depend on
the view direction. Therefore, just precompute them - we still have space in
PrincipledHairExtra after all.
- Fix a tiny bug - the direction sampling code did not account for the R lobe
roughness modifier.
Pull Request #104669
In order to experiment with different storage types for `DRW_Attributes`
and for general cleanup (see #103343). Also move a curves header to C++.
Pull Request #104716
The existing logic to copy `BMesh` custom data layers to `Mesh`
attribute arrays was quite complicated, and incorrect in some cases
when the source and destinations didn't have the same layers.
The functions leave a lot to be desired in general, since they have
a lot of redundant complexity that ends up doing the same thing for
every element.
The problem in #104154 was that the "rest_position" attribute overwrote
the mesh positions since it has the same type and the positions weren't
copied. This same problem has shown up in boolean attribute conversion
in the past. Other changes fixed some specific cases but I think a
larger change is the only proper solution.
This patch adds preprocessing before looping over all elements to
find the basic information for copying the relevant layers, taking
layer names into account. The preprocessing makes the hot loops
simpler.
In a simple file with a 1 million vertex grid, I observed a 6%
improvement animation playback framerate in edit mode with a simple
geometry nodes modifier, from 5 to 5.3 FPS.
Fixes#104154, #104348
Pull Request #104421
Don't crash on nonexisting uv selection layers. Add an assert
because for now it is a bug if they don't exist. But when converting
back to Mesh it is preferable to accept in release mode, as opposed to
crashing.
Pull Request #104600
When generating a Mesh from a BMesh the uv map bool layers are not
copied if all elements are false. To suppress the copying the flag
CD_FLAG_NOCOPY is set in the layer flags. However these layers *do*
need to be copied to other BMeshes (for example undo steps). So we
need to clear them afterwards.
This commit adds the ability to import USD Shape primitives (Gprims).
They are imported as Blender Meshes using the USD API to convert, so
that they appear the same as they would in other applications. USD
Shapes are important in many workflows, particularly in gaming, where
they are used for stand-in geometry or for collision primitives.
Pull Request #104707
The issue was caused by rather recent refactor in 7dea18b3aa.
The root of the issue lies within the fact that the optical center was updated
on the Blender side after the solution was run. There was a mistake in the code
which double-corrected for the pixel aspect ratio.
Added a comment in the code about this, so that it does not look suspicious.
Pull Request #104711
`CTX_wm_operator_poll_msg_set()` is covered by the translation script
and always translates these strings. Checked with Bastien, he prefers
not having the redundancy here.
## Cleanup: Refactor NLATrack / NLAStrip Remove
This PR adds 3 new methods:
* BKE_nlatrack_remove_strip
* BKE_nlastrip_remove
* BKE_nlastrip_remove_and_free
These named BKE methods are really just replacements for BLI_remlink, but with some added checks, and enhanced readability.
Co-authored-by: Nate Rupsis <nrupsis@gmail.com>
Pull Request #104437
Send a notification and tag for an update even if the selection doesn't
exist, which is still necessary for drawing that depends on the
selection domain.
As a side effect of this change, more resolution divisions are now available.
Before this patch the possible resolution divisions were all powers of two.
Now the possible resolution divisions are the multiples of pixel_size.
This increase in possible resolution divisions is the same idea proposed in https://archive.blender.org/developer/D13590.
In that patch there were concerns that this will increase the time between a user navigating
and seeing the 1:1 render. To my knowledge this is a non-issue and there should be
little to no increase in time between those two events.
Pull Request #104450
This is needed to be able to query asset library information from an
asset. This again is relevant especially for the "All" asset library,
where you can't just directly access the library itself, which is
different for different assets.
The current design is that an asset representation is owned by exactly
one asset library, so having this pointer is perfectly compatible with
the design.
Reviewed by: Julian Eisel
This replaces `GPU_SHADER_3D_POINT_FIXED_SIZE_VARYING_COLOR` by
GPU_SHADER_2D_POINT_UNIFORM_SIZE_UNIFORM_COLOR_OUTLINE_AA`.
None of the usage made sense to not use the AA shader.
Scale the point size to account for the rounded shape.
Ref #104280
The scaling of area light / spot light blend was wrong because it is
calculated for pivot at the edges. The new implementation in theory
works for all `abs(pivot) <= 0.5f`, although we only have -0.5, 0, and
0.5.
- Axis constraint for box cage was only applied when there is translate
flag, now the same logic is applied regardless of the translate flag,
this means when dragging the edge, the scaling in the other axis stays
the same; when dragging the corners, it applies free-form scaling.
- Due to the existence of margin, `data->orig_mouse` does not lie
exactly on the boundary. Using that value to compute the scaling causes
the error to accumulate over distance. The new implementation uses the
original dimension of the object instead, and only uses
`data->orig_mouse` to determine the side of the original cursor relative
to the pivot.
- For circular gizmo with unsigned scaling, the gizmo only follow the
cursor exactly when the cursor stays in the original quadrant, otherwise
it's hard to handle the logic when we should clamp the scaling.
The buttons of enum context menus are of type `UI_BUT_ROW`. They
are part of the set of buttons we create underline shortcuts for in
`ui_menu_block_set_keyaccels`.
But since they weren't handled in `ui_handle_button_activate_by_type`,
pressing the underline shortcuts didn't do anyting in those cases.
Co-authored-by: Leon Schittek <leon.schittek@gmx.net>
Co-authored-by: Brecht Van Lommel <brecht@noreply.localhost>
Pull Request #104433
Currently the passepartout color is hardcoded to black. While a
sensible default for cinema, it may make less sense for other media,
whether video, print, web, etc. It greatly affects viewing conditions
of the image and should be user selectable, much like painting
programs allow.
Pull Request #104486
Don't create caps when using cyclic profile splines with two or fewer
points.
This case wasn't handled, yet, leading to invalid meshes or crashes.
Co-authored-by: Leon Schittek <leon.schittek@gmx.net>
Pull Request #104594
Vulkan has a pluggable memory allocation feature, which allows internal
driver allocations to be done by the client application provided
allocator. Vulkan uses this for more client application allocations
done inside the driver, but can also do it for more internal oriented
allocations.
VK_ALLOCATION_CALLBACKS initializes allocation callbacks for host allocations.
The macro creates a local static variable with the name vk_allocation_callbacks
that can be passed to vulkan API functions that expect
const VkAllocationCallbacks *pAllocator.
When WITH_VULKAN_GUARDEDALLOC=Off the memory allocation implemented
in the vulkan device driver is used for both internal and application
oriented memory operations.
For now this would help during the development of Vulkan backend to
detect hidden memory leaks that are hidden inside the driver part
of the stack. In a later stage we need to measure the overhead and
if this should become the default behavior.
Pull Request #104434
The GPU module has 2 different styles when reading back data from
GPU buffers. The SSBOs used a memcpy to copy the data to a
pre-allocated buffer. IndexBuf/VertBuf gave back a driver/platform
controlled pointer to the memory.
Readback is done for test cases returning mapped pointers is not safe.
For this reason we settled on using the same approach as the SSBO.
Copy the data to a caller pre-allocated buffer.
Reason why this API is currently changed is that the Vulkan API is more
strict on mapping/unmapping buffers that can lead to potential issues
down the road.
Pull Request #104571
Keep using the 3 evaluations dF_branch method for the Displacement output.
The optimized 2 evaluations method used by node_bump is now on its own macro (dF_branch_incomplete).
displacement_bump modifies the normal that nodetree_exec uses, so even with a refactor it wouldn’t be possible to re-use the computation anyway.
Using larger integer types allows for more efficient code, because we
can use the hardware better. Instead of working on individual bytes,
the code can now work on 8 bytes at a time. We don't really benefit
from this immediately but I'm planning to implement some more optimized
bit vector operations for #104629.
Pull Request #104658
Add a test to address the issue raised in #103913, where zero area
triangles could be created from polygons that have co-linear edges
but were not degenerate.
Since USD is no longer statically linked these linker tricks
are no longer needed.
Co-authored-by: Ray Molenkamp <github@lazydodo.com>
Pull Request #104627
When building a node group that's meant to be used directly in the
node editor as well as in the modifier, it's useful to be able to have
some inputs that are only meant for the node editor, like inputs that
only make sense when combined with other nodes.
In the future we might have the ability to only display certain assets
in the modifier and the node editor, but until then this simple solution
allows a bit more customization.
Pull Request #104517
During hair grooming in curves sculpt mode, it is very useful when hair strands
are prevented from intersecting with the surface mesh. Unfortunately, it also
decreases performance significantly so we don't want it to be turned on all the time.
The surface collision is used by the Comb, Pinch and Puff brushes currently.
It can be turned on or off on a per-geometry basis.
The intersection prevention quality of this patch is not perfect yet. This can
be improved over time using a better solver. Overall, perfect collision detection
at the cost of bad performance is not necessary for interactive sculpting,
because the user can fix small mistakes very quickly. Nevertheless, the quality
can probably still be improved significantly without too big slow-downs depending
on the use case. This can be done separately from this patch.
Pull Request #104469
Previously, the node used the "true" normal of every looptri. Now it uses the
"loop normals" which includes e.g. smooth faces and custom normals. The true
normal can still be used on the points by capturing it before the Distribute node.
We do intend to expose the smooth normals separately in geometry nodes as well,
but this is an important first step.
It's also necessary to generate child hair between guide hair strands that don't
have visible artifacts at face boundaries.
For perfect backward compatibility, the node still has a "Legacy Normal" option
in the side bar. Creating the exact same behavior with existing nodes isn't
really possible unfortunately because of the specifics of how the Distribute
node used to compute the normals using looptris.
Pull Request #104414
CustomData layer names should not be written except via the CusomData
api. Therefore use const char * instead of char * when referencing the
layer name.
Pull Request #104585
Avoid computing the non-derivative height twice.
The height is now computed as part of the main function, while the height at x and y offsets are still computed on a separate function.
The differentials are now computed directly at node_bump.
Co-authored-by: Miguel Pozo <pragma37@gmail.com>
Pull Request #104595
This adds a `select_lasso` and a `select_circle` function for the Curves object. It is used in the `view3d_lasso_select` and `view3d_circle_select` operator.
Co-authored-by: Falk David <falkdavid@gmx.de>
Pull Request #104560
This adds a new `select_linked` function that selects all the points
on a curve if there is at least one point already selected.
This also adds a keymap for the operator.
Co-authored-by: Falk David <falkdavid@gmx.de>
Pull Request #104569
Add `contains_group` method in python api for `NodeTree` type, cleanup
`ntreeHasTree` function, reuse `ntreeHasTree` in more place in code.
The algorithm has been changed to not recheck trees by using set.
Performance gains from avoiding already checked node trees:
Based on tests, can say that for large files with a huge number
of trees, the response speed of opening the search menu in the
node editor increased by ~200 times (for really large projects
with 16 individual groups in 6 levels of nesting). Group insert
operations are also accelerated, but this is different in some cases.
Pull Request #104465
This reverts commit aab707ab70.
A different solution to the submodule problem is being considered in #104573.
Revert to the previous behavior that developers are familiar with for now.
This just adds `threading::parallel_for` and `threading::parallel_invoke` in a few
places where it can be added trivially. The run time of the `separate_geometry`
function changes from 830 ms to 413 ms in my test file.
Pull Request #104563
Using callback functions didn't scale well as more arguments are added.
It got very confusing when to pass tehmarguments weren't always used.
Instead use a `FunctionRef` with indices for arguments. Also remove
unused edge arguments to topology mapping functions.
Adds an experimental option under "New Features" in preferences,
which enables visibility of the new Volume Nodes.
Right now this option does nothing but will be used during development.
See #103248
Pull Request #104552
Because of T95965, some attributes are stored as generic attributes
in Mesh but have special handling for the conversion to BMesh.
Expose a function to tell whether certain attribute names are handled
specially in the conversion, and refactor the error checking process
to use it. Also check for generic attributes on the face domain which
wasn't done before.
Author: Hans Goudey
Reviewed By: Joseph Eagar
Co-authored-by: Joseph Eagar <joeedh@gmail.com>
Pull Request #104567
When merging two gpencil layers, if the destination layer had a keyframe
where the source layer did not, strokes of the previous keyframe
in source layer were lost in that frame.
This happened because the merge operator was looping through
frames of the source layer and appending strokes in the
corresponding destination layer, but never completing
other frames than the ones existing in the source layer.
This patch fixes it by first adding in source layer
all frames that are in destination layer.
Co-authored-by: Amelie Fondevilla <amelie.fondevilla@les-fees-speciales.coop>
Pull Request #104558
When the sequencer is empty (i.e., there are no sequences),
we would have the deselect_all variable set to true called
ED_sequencer_deselect_all to select any existing sequences.
Ref !104453
Box-Selecting channels in the dope sheet with click-drag was no longer possible as of Blender 3.2
Due to the removal of tweak events the box select operator was always shadowed by the click operator.
Original Phabricator discussion here: https://archive.blender.org/developer/D17065
Use `WM_operator_flag_only_pass_through_on_press` on click operator to fix it
Co-authored-by: Christoph Lendenfeld <chris.lenden@gmail.com>
Pull Request #104505
(Follow on from D17043)
On AMD Navi2 devices the MetalRT checkbox was not hooked up properly and had no effect. This patch fixes it.
Co-authored-by: Michael Jones <michael_p_jones@apple.com>
Pull Request #104520
- Avoid flooding the output with every match that succeeds.
- Report patterns listed in the manual that don't match anything in
Blender.
- Disable external URL lookups, this is too slow.
Instead use a LOCAL_PREFIX (a local build of the manual)
or skip the test.
Without this, every access to "language" would warn that the enum
value didn't match a value in the enum items.
This made the bl_rna_manual_reference.py test output practically
unusable.
The generator now skips these with a warning, they will need to be
corrected in the user manual.
This caused tests/python/bl_rna_manual_reference.py to fail looking
up URL's.
Move the function for getting the language code associated with the
user manual into a utility function (from the generated
rna_manual_reference.py).
This allows other parts of Blender to create a manual URL based on the
current locale preferences and environment.
Ref !104494
Documented all functions, adding use case and side effects.
Also replace the use of shortened argument name by more meaningful ones.
Renamed `GPU_batch_instbuf_add_ex` and `GPU_batch_vertbuf_add_ex` to remove
the `ex` suffix as they are the main version used (removed the few usage
of the other version).
Renamed `GPU_batch_draw_instanced` to `GPU_batch_draw_instance_range` and
make it consistent with `GPU_batch_draw_range`.
When nodes are copied to the clipboard, they don't need their declaration.
For nodes with dynamic declaration that might depend on the node tree itself,
the declaration could not be build anyway, because the node-clipboard does
not have a node tree.
Pull Request #104432
Add a new node that groups faces inside of boundary edge regions.
This is the opposite action as the existing "Face Group Boundaries"
node. It's also the same as some of the "Initialize Face Sets"
options in sculpt mode.
Discussion in #102962 has favored "Group" for a name for these
sockets rather than "Set", so that is used here.
Pull Request #104428
Currently there's no way to assign a geometry node group from the asset
browser to an object as a modifier without first appending/linking it
manually. This patch adds a drag and drop operator that adds a new
modifier and assigns the dragged tree.
Pull Request #104430
As described in #95966, replace the `ME_EDGEDRAW` flag with a bit
vector in mesh runtime data. Currently the the flag is only ever set
to false for the "optimal display" feature of the subdivision surface
modifier. When creating an "original" mesh in the main data-base,
the flag is always supposed to be true.
The bit vector is now created by the modifier only as necessary, and
is cleared for topology-changing operations. This fixes incorrect
interpolation of the flag as noted in #104376. Generally it isn't
possible to interpolate it through topology-changing operations.
After this, only the seam status needs to be removed from edges before
we can replace them with the generic `int2` type (or something similar)
and reduce memory usage by 1/3.
Related:
- 10131a6f62
- 145839aa42
In the future `BM_ELEM_DRAW` could be removed as well. Currently it is
used and aliased by other defines in some non-obvious ways though.
Pull Request #104417
This adds a `select_box` function for the `Curves` object. It is used in the `view3d_box_select` operator.
It also adds the basic selection tools in the toolbar of Edit Mode.
Authored-by: Falk David <falkdavid@gmx.de>
Pull Request #104411
The required version numbers for various devices was hardcoded in the
UI messages. The result was that every time one of these versions was
bumped, every language team had to update the message in question.
Instead, the version numbers can be extracted, and injected into the
error messages using string formatting so that translation updates
need happen less frequently.
Pull Request #104488
`bAnimContext` had a float property called `yscale_fac` that was used to define the height of the keyframe channels.
However the property was never set, only read so there really is no need to have it in the struct.
Moreover it complicated getting the channel height because `bAnimContext` had to be passed in.
Speaking of getting the channel height. This was done with macros. I ripped them all out and replaced them with function calls.
Originally it was introduced in this patch: https://developer.blender.org/rB095c8dbe6919857ea322b213a1e240161cd7c843
Co-authored-by: Christoph Lendenfeld <chris.lenden@gmail.com>
Pull Request #104500
This is used for most Python release builds and has been reported to
give a modest 5-10% speedup (depending on the workload).
This could be enabled on macOS too but needs to be tested.
Blender was reporting that the GPU_TEXTURE_USAGE_HOST_READ wasn't set.
This is used to indicate that the textures needs to be read back to
CPU. Textures that don't need to be read back can be optimized by the
GPU backend.
Found during investigation of #104282.
- Use bpy.utils.execfile instead of importing then deleting from
sys.modules.
- Add a note for why keeping this cached in memory isn't necessary.
This has the advantage of not interfering with any scripts that import
`rna_manual_reference` as a module.
This allow to bypass all cost associated with shadow mapping.
This can be useful in certain situation, such as opening a scene on a
lower end system or just to gain performance in some situation (lookdev).
The merge with master updated the code to use the new matrix API. This
introduce some regressions.
For sunlights make sure there is enough tilemaps in orthographic mode
to cover the depth range and fix the level offset in perspective.
Implements virtual shadow mapping for EEVEE-Next primary shadow solution.
This technique aims to deliver really high precision shadowing for many
lights while keeping a relatively low cost.
The technique works by splitting each shadows in tiles that are only
allocated & updated on demand by visible surfaces and volumes.
Local lights use cubemap projection with mipmap level of detail to adapt
the resolution to the receiver distance.
Sun lights use clipmap distribution or cascade distribution (depending on
which is better) for selecting the level of detail with the distance to
the camera.
Current maximum shadow precision for local light is about 1 pixel per 0.01
degrees.
For sun light, the maximum resolution is based on the camera far clip
distance which sets the most coarse clipmap.
## Limitation:
Alpha Blended surfaces might not get correct shadowing in some corner
casses. This is to be fixed in another commit.
While resolution is greatly increase, it is still finite. It is virtually
equivalent to one 8K shadow per shadow cube face and per clipmap level.
There is no filtering present for now.
## Parameters:
Shadow Pool Size: In bytes, amount of GPU memory to dedicate to the
shadow pool (is allocated per viewport).
Shadow Scaling: Scale the shadow resolution. Base resolution should
target subpixel accuracy (within the limitation of the technique).
Related to #93220
Related to #104472
The previous change in the .gitmodules made it so the `make update`
rejects to do its thing because it now sees changes in the submodules
and rejected to update, thinking there are unstaged changes.
Ignore the submodule changes, bringing the old behavior closer to
what it was.
The meaning of the ignore option for submodules did change since our
initial Git setup was done: back then it was affecting both diff and
stage families of Git command. Unfortunately, the actual behavior did
violate what documentation was stating (the documentation was stating
that the option only affects diff family of commands). This got fixed
in Git some time after our initial setup and it was the behavior of the
commands changed, not the documentation. This lead to a situation when
we can no longer see that submodules are modified and staged, and it is
very easy to stage the submodules.
For the clarity: diff and status are both "status" family, show and
diff are "diff" family.
Hence this change: since there is no built-in zero-configuration way
of forbidding Git from staging submodules lets make it visible and
clear what the state of submodules is.
We still need to inform people to not stage submodules, for which
we can offer some configuration tips and scripts but doing so is
outside of the scope of this change at it requires some additional
research. Current goal is simple: make it visible and clear what is
going to be committed to Git.
This is a response to an increased frequency of incidents when the
submodules are getting modified and committed without authors even
noticing this (which is also a bit annoying to recover from).
Differential Revision: https://developer.blender.org/D13001
Subdivision surface efficiency relies on caching pre-computed topology
data for evaluation between frames. However, while eed45d2a23
introduced a second GPU subdiv evaluator type, it still only kept
one slot for caching this runtime data per mesh.
The result is that if the mesh is also needed on CPU, for instance
due to a modifier on a different object (e.g. shrinkwrap), the two
evaluators are used at the same time and fight over the single slot.
This causes the topology data to be discarded and recomputed twice
per frame.
Since avoiding duplicate evaluation is a complex task, this fix
simply adds a second separate cache slot for the GPU data, so that
the cost is simply running subdivision twice, not recomputing topology
twice.
To help diagnostics, I also add a message to show when GPU evaluation
is actually used to the modifier panel. Two frame counters are used
to suppress flicker in the UI panel.
Differential Revision: https://developer.blender.org/D17117
Pull Request #104441
The ear clipping method used by polyfill_2d only excluded concave ears
which meant ears exactly co-linear edges created zero area triangles
even when convex ears are available.
While polyfill_2d prioritizes performance over *pretty* results,
there is no need to pick degenerate triangles with other candidates
are available. As noted in code-comments, callers that require higher
quality tessellation should use BLI_polyfill_beautify.
Sockets after the geometry socket were ignored when cycling through
the node's output sockets. If there are multiple geometry sockets, the
behavior could still be refined probably, but this should at least make
basic non-geometry socket cycling work.
Now a single script to generate both links and release notes. It also includes
the issue ID for the LTS releases, so only the release version needs to be
specified.
Pull Request #104402
Minor change to [0], prefer calling em_setup_viewcontext,
even though there is no functional difference at the moment,
if this function ever performs additional operations than assigning
`ViewContext.em`, it would have to be manually in-lined in
`view3d_circle_select_recalc`.
[0]: 430cc9d7bf
Added missing documentation for `draw_cursor_add` and
`draw_cursor_remove` methods for `WindowManager`.
Differential Revision: https://developer.blender.org/D14860
Discard is not always treated as an explicit return and flow control can continue for required derivative calculations. This behaviour is different in Metal vs OpenGL. Adding return after discards ensures consistency in expectation as behaviour is well-defined.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D17199
Host memory fallback in CUDA and HIP devices is almost identical.
We remove duplicated code and create a shared generic version that
other devices (oneAPI) will be able to use.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D17173
Straightforward port. I took the oportunity to remove some C vector
functions (ex: copy_v2_v2).
This makes some changes to DRWView to accomodate the alignement
requirements of the float4x4 type.
`9c14039a8f4b5f` broke blenlib tests in release builds, due to how
`EXPECT_BLI_ASSERT` works (in release builds it just calls the given
function, so if that crashes then the test fails).
For now remove that check in the test.
Remove the use of a separate contiguous positions array now that
they are stored that way in the first place. This allows removing the
complexity of tracking whether it is allocated and deformed in the
mesh modifier stack.
Instead of deferring the creation of the final mesh until after the
positions have been copied and deformed, create the final mesh
first and then deform its positions.
Since vertex and face normals are calculated lazily, we can rely on
individual modifiers to calculate them as necessary and simplify
the modifier stack. This was hard to change before because of the
separate array of deformed positions.
Differential Revision: https://developer.blender.org/D16971
When activating a rotation with the Transform gizmo for example, some
gizmos are hidden but they don't reappear when changing the mode.
Make sure the gizmos corresponding to the mode always reappear.
This patch optimises subsurface intersection queries on MetalRT. Currently intersect_local traverses from the scene root, retrospectively discarding all non-local hits. Using a lookup of bottom level acceleration structures, we can explicitly query only the relevant instance. On M1 Max, with MetalRT selected, this can give a render speedup of 15-20% for scenes like Monster which make heavy use of subsurface scattering.
Patch authored by Marco Giordano.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D17153
`em_setup_vivewcontext` cannot be used in this function now as it
expects `obedit` to be a mesh. It also duplicated the viewcontext init.
Instead `BKE_editmesh_from_object` is called only when type is a mesh.
Existing `BKE_main_namemap_destroy` is too specific when a entire Main
needs to have its namemaps cleared, since it would not handle the
Library ones.
While in regular situation current code is fine, ID management code that
may also edit linked data needs a wider, simpler clearing tool.
Current `BKE_id_remapper_add` would not replace an already existing
mapping rule, now `BKE_id_remapper_add_overwrite` allows that behavior
if necessary.
If identity pairs (i.e. old ID pointer being same as new one) was
forbidden, then this should be asserted against in code defining
remapping, not in code applying it.
But it is actually sometimes usefull to allow/use identity pairs, so
simply early-return on these instead of asserting.
The goal is to give technical artists the ability to optimize modifier usage
and/or geometry node groups for performance. In the long term, it
would be useful if Blender could provide its own UI to display profiling
information to users. However, right now, there are too many open
design questions making it infeasible to tackle this in the short term.
This commit uses a simpler approach: Instead of adding new ui for
profiling data, it exposes the execution-time of modifiers in the Python
API. This allows technical artists to access the information and to build
their own UI to display the relevant information. In the long term this
will hopefully also help us to integrate a native ui for this in Blender
by observing how users use this information.
Note: The execution time of a modifier highly depends on what other
things the CPU is doing at the same time. For example, in many more
complex files, many objects and therefore modifiers are evaluated at
the same time by multiple threads which makes the measurement
much less reliable. For best results, make sure that only one object
is evaluated at a time (e.g. by changing it in isolation) and that no
other process on the system keeps the CPU busy.
As shown below, the execution time has to be accessed on the
evaluated object, not the original object.
```lang=python
import bpy
depsgraph = bpy.context.view_layer.depsgraph
ob = bpy.context.active_object
ob_eval = ob.evaluated_get(depsgraph)
modifier_eval = ob_eval.modifiers[0]
print(modifier_eval.execution_time, "s")
```
Differential Revision: https://developer.blender.org/D17185
The `SNAP_FORCED` setting is set to the operation and not the snap
status.
Therefore, this option should not be cleared along with the other
statuses when resetting snapping.
Move then the location of this setting to `TransInfo::modifiers`.
BGL deprecation calls used to be reported on each use. As bgl calls
are typically part of a handler that is triggered at refresh this
could lead to overflow of messages and slowing down systems when
the terminal/console had to be refreshed as well.
This patch only reports the first 100 bgl deprecation calls. This
gives enough feedback to the developer that changes needs to be made
. But still provides good responsiveness to users when they have
such add-on enabled. Only the first frames can have a slowdown.
This patch adds two new kernels: SORT_BUCKET_PASS and SORT_WRITE_PASS. These replace PREFIX_SUM and SORTED_PATHS_ARRAY on supported devices (currently implemented on Metal, but will be trivial to enable on the other backends). The new kernels exploit sort partitioning (see D15331) by sorting each partition separately using local atomics. This can give an overall render speedup of 2-3% depending on architecture. As before, we fall back to the original non-partitioned sorting when the shader count is "too high".
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D16909
This patch removes the option to select both AMD and Intel GPUs on system that have both. Currently both devices will be selected by default which results in crashes and other poorly understood behaviour. This patch adds precedence for using any discrete AMD GPU over an integrated Intel one. This can be overridden with CYCLES_METAL_FORCE_INTEL.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D17166
This patch fixes T103393 by undefining `__LIGHT_TREE__` on Metal/AMD as it has an unexpected & major impact on performance even when light trees are not in use.
Patch authored by Prakash Kamliya.
Reviewed By: brecht
Maniphest Tasks: T103393
Differential Revision: https://developer.blender.org/D17167
The merge down operator was sometimes copying the wrong frame, which altered the animation.
While merging the layers, it is sometimes needed to duplicate a keyframe,
when the lowest layer does not have a keyframe but the highest layer does.
Instead of duplicating the previous keyframe of the lowest layer, the code
was actually duplicating the active frame of the layer which was the current frame in the timeline.
This patch fixes the issue by setting the previous keyframe of the layer as its active frame before duplication.
Related issue: T104371.
Differential Revision: https://developer.blender.org/D17214
Mutex locks for manipulating GHOST_System::m_timerManager from
GHOST_SystemWayland relied on WAYLAND being the only user of the
timer-manager.
This isn't the case as timers are fired from
`GHOST_System::dispatchEvents`.
Resolve by using a separate timer-manager for wayland key-repeat timers.
Resolve a thread safety issue reported by valgrind's helgrind checker,
although I wasn't able to redo the error in practice.
NULL check on the key-repeat timer also needs to lock, otherwise it's
possible the timer is set in another thread before the lock is acquired.
Now all key-repeat timer access which may run from a thread
locks the timer mutex before any checks or timer manipulation.
There were two errors with the function used to convert face sets
to the legacy mesh format for keeping forward compatibility:
- It was moved before `CustomData_blend_write_prepare` so it
operated on an empty span.
- It modified the mesh when it's only supposed to change the copy
of the layers written to the file.
Differential Revision: https://developer.blender.org/D17210
This implements two optimizations:
* If the duplication count is constant, the offsets array can be
filled directly in parallel.
* Otherwise, extracting the counts from the virtual array is parallelized.
But there is still a serial loop over all elements in the end to compute
the offsets.
In the unlikely case an area could not be created OPERATOR_CANCELLED
was returned, this has the same value of WM_HANDLER_HANDLED however
break is logical in this situation and both flags work.
If GetFileAttributesW returns an error, only debug assert if the reason
is file not found.
See D17204 for more details.
Differential Revision: https://developer.blender.org/D17204
Reviewed by Ray Molenkamp
Allow preview region to change cursor as per the selected tool
Reviewed by: campbellbarton, ISS
Differential Revision: https://developer.blender.org/D16878
This makes the code more readable.
In this commit also the `int curr_side_unclamp` member was moved to
`EdgeSlideParams` as it is a common value for all "Containers".
There was an inconsistency between geometry sample nodes and mesh/curve
sample nodes, where the latter didn't have a special "Sample" category,
and we categorized as "Operations", which they were not. Also put the
sample category between "Read" and "Write" since the verb name is
more consistent and sampling is an advanced form of reading.
In some cases panels without headers were drawn too wide in sidebars
with region overlap.
Instead of always using the maximum width the view allows, headerless
panels now also use the width calculated in
`panel_draw_width_from_max_width_get`. The function already returns the
correct width in all cases and also takes care of insetting the panels,
when their backdrop needs to be drawn, which is necessary for headerless
panels, too, when there is region overlap.
Reviewed By: Hans Goudey
Differential Revision: http://developer.blender.org/D17194
This is both a cleanup and a preparation for the Principled v2 changes.
Notable changes:
- Clearcoat weight is now folded into the closure weight, there's no reason
to track this separately.
- There's a general-purpose helper for computing a Closure's albedo, which is
currently used by the denoising albedo and diffuse/gloss/transmission color
passes.
- The d/g/t color passes didn't account for closure albedo before, this means
that e.g. metallic shaders with Principled v2 now have their color texture
included in the glossy color pass. Also fixes T104041 (sheen albedo).
- Instead of precomputing and storing the albedo during shader setup, compute
it when needed. This is technically redundant since we still need to compute
it on shader setup to adjust the sample weight, but the operation is cheap
enough that freeing up the storage seems worth it.
- Future changes (Principled v2) are easier to integrate since the Fresnel
handling isn't all over the place anymore.
- Fresnel handling in the Multiscattering GGX code is still ugly, but since
removing that entirely is the next step, putting effort into cleaning it up
doesn't seem worth it.
- Apart from the d/g/t color passes, no changes to render results are expected.
Differential Revision: https://developer.blender.org/D17101
Useful for validating changes when sampling/noise changes:
- First run with BLENDER_TEST_UPDATE=1 and e.g. CYCLESTEST_SPP_MULTIPLIER=32
- Apply your change
- Run with only CYCLESTEST_SPP_MULTIPLIER=32
- Compare
- Reset the SVN repo
Differential Revision: https://developer.blender.org/D17107
Cycles ignores the size of spot lights, therefore the illuminated area doesn't match the gizmo. This patch resolves this discrepancy.
| Before (Cycles) | After (Cycles) | Eevee
|{F14200605}|{F14200595}|{F14200600}|
This is done by scaling the ray direction by the size of the cone. The implementation of `spot_light_attenuation()` in `spot.h` matches `spot_attenuation()` in `lights_lib.glsl`.
**Test file**:
{F14200728}
Differential Revision: https://developer.blender.org/D17129
Own mistake in d204830107.
For some buttons the type is changed after construction, which means the button
has to be reconstructed. For example number buttons can be turned into number
slider buttons this way. New code was unintentionally overriding the button
type after reconstruction with the old type again.
Use the `SharedCache` concept introduced in D16204 to share lazily
calculated evaluated data between original and multiple evaluated
curves data-blocks. Combined with D14139, this should basically remove
most costs associated with copying large curves data-blocks (though
they add slightly higher constant overhead). The caches should
interact well with undo steps, limiting recalculations on undo/redo.
Options for avoiding the new overhead associated with the shared
caches are described in T104327 and can be addressed separately.
Simple situations affected by this change are using any of the following data
on an evaluated curves data-block without first invalidating it:
- Evaluated offsets (size of evaluated curves)
- Evaluated positions
- Evaluated tangents
- Evaluated normals
- Evaluated lengths (spline parameter node)
- Internal Bezier and NURBS caches
In a test with 4m points and 170k curves, using curve normals in a
procedural setup that didn't change positions procedurally gave 5x
faster playback speeds. Avoiding recalculating the offsets on every
update saved about 3 ms for every sculpt update for brushes that don't
change topology.
Differential Revision: https://developer.blender.org/D17134
This will add a proper modal keymap for the node link drag operator.
It allows the user to customize the keys used to start drag and so on.
Also it gets rid of the custom status bar message.
Differential Revision: https://developer.blender.org/D17190
No user-visible changes expected.
Essentially, this makes it possible to use C++ types like `std::function`
inside `uiBut`. This has plenty of benefits, for example this should help
significantly reducing unsafe `void *` use (since a `std::function` can hold
arbitrary data while preserving types).
----
I wanted to use a non-trivially-constructible C++ type (`std::function`) inside
`uiBut`. But this would mean we can't use `MEM_cnew()` like allocation anymore.
Rather than writing worse code, allow non-trivial construction for `uiBut`.
Member-initializing all members is annoying since there are so many, but rather
safe than sorry. As we use more C++ types (e.g. convert callbacks to use
`std::function`), this should become less since they initialize properly on
default construction.
Also use proper C++ inheritance for `uiBut` subtypes, the old way to allocate
based on size isn't working anymore.
Differential Revision: https://developer.blender.org/D17164
Reviewed by: Hans Goudey
Currently this conversion (which happens when using modifiers in edit
mode, for example) is completely single threaded. It's harder than some
other areas to multithread because BMesh elements don't always know
their indices (and vise versa), and because the dynamic AoS format
used by BMesh makes some typical solutions not helpful.
This patch proposes to split the operation into two steps. The first
updates the indices of BMesh elements and builds tables for easy
iteration later. It also checks if some optional mesh attributes
should be added. The second uses parallel loops over all elements,
copying attribute values and building the Mesh topology.
Both steps process different domains in separate threads (though the
first has to combine faces and loops). Though this isn't proper data
parallelism, it's quite helpful because each domain doesn't affect the
others.
**Timings**
I tested this on a Ryzen 7950x with a 1 million face grid, with no
extra attributes and then with several color attributes and vertex
groups.
| File | Before | After |
| Simple | 101.6 ms | 59.6 ms |
| More Attributes | 149.2 ms | 65.6 ms |
The optimization scales better with more attributes on the BMesh. The
speedup isn't as linear as multithreading other operations, indicating
added overhead. I think this is worth it though, because the user is
usually actively interacting with a mesh in edit mode.
See the differential revision for more timing information.
Differential Revision: https://developer.blender.org/D16249
Whenever a transform operation is activated by gizmo, the gizmo
modal is maintained, but its drawing remains the same even if the
transform mode or constrain is changed.
So update the gizmo according to the mode or constrain set.
NOTE: Currently only 3D view gizmo is affected
The operator has the option to add to selected FCurves instead
of only the active, but it was only exposed in the redo panel.
This patch adds the operator to the right-click menu on FCurve channels,
and to the channel menu in the Graph editor.
Both times with configured to add to selected
instead of only the active FCurve
Revied by Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D17066
Ref: D17066
Implements T103858: in OBJ importer and exporter, and in Collada
exporter, present axis choices as a dropdown instead of inline button
row.
Reviewed By: Bastien Montagne
Differential Revision: https://developer.blender.org/D17186
- Replace type annotations with doc-strings, the current conventions is
not to use type annotations in startup scripts.
- Replace abbreviation "idx" with "index" in public arguments/properties.
- Replace `len(..) > 0` with boolean checks.
- Add `__all__` to list public members.
- Use `arg` instead of `param` for doc-strings.
- Locate the doc-string so it shows as `__doc__`.
The recursion depth was checked for equality with a maximum depth,
allowing leaves with more primitives if a certain depth was reached.
However, a single leaf must always use the same material (including
set_smooth), so if a leaf contained multiple materials it was split
anyway. This meant that in the next recursion step the depth was
larger than the cutoff value and it would go back to recursing until
the number of primitives was small enough, ignoring the recursion
depth for the rest of the process.
In certain edge cases this could lead to a stack overflow.
Even with the check changed from 'equality' to 'larger or equal'
this could still fail in the pathological case where every primitive
has another material. But that can't be helped, and it wouldn't
realistically happen either.
Differential Revsision: https://developer.blender.org/D17188
Straightforward port. I took the oportunity to remove some C vector
functions (ex: `copy_v2_v2`).
This makes some changes to DRWView to accomodate the alignement
requirements of the float4x4 type.
This declaration change tells the evaluation system that the radius
field is evaluated on the input geometry. Which in turn means that
attributes referenced by the radius field should be propagated to
the geometry.
After Win32 API call GetFileAttributesW, check for
INVALID_FILE_ATTRIBUTES, which is returned on error,
usually if file not found.
See D17176 for more details.
Differential Revision: https://developer.blender.org/D17176
Reviewed by Ray Molenkamp
The declaration of group nodes using unavailable linked groups contains
a `skip_updating_sockets` tag, which indicates that the node shouldn't
change. This information was not used properly further down the line.
Versioning code in `do_versions_after_linking_260` inserted new group input
and output nodes. And (reasonably?) expected sockets to exist on those nodes.
However, `nodeAddStaticNode` did not initialize sockets on nodes with that use
`declare_dynamic` yet. This patch changes it so that `declare_dynamic` is used
in more places, which caused issues during file loading when node groups are
updated in somewhat arbitrary order (not in an order that is based on which
groups use which).
Differential Revision: https://developer.blender.org/D17183
Adds two operators to select linked vertices in weight paint mode.
Similar to how it works in edit mode.
Press "L" to select vertices under the cursor,
or CTRL + "L" to select anything linked to the current selection.
Reviewed by: Sybren A. Stüvel, Hans Goudey, Marion Stalke
Differential Revision: https://developer.blender.org/D16848
Ref: D16848
`ED_GIZMO_CAGE2D_STYLE_CIRCLE` now draw circles. The previous `ED_GIZMO_CAGE2D_STYLE_CIRCLE`, which drew rectangles, is renamed to `ED_GIZMO_CAGE2D_STYLE_RECTANGLE`. The meaning of `ED_GIZMO_CAGE2D_STYLE_BOX` is now unclear and probably needs to be renamed too.
Ref T104280
Maniphest Tasks: T104280
Differential Revision: https://developer.blender.org/D17174
Remove some assumptions that an FCurve with a single keyframe always is
extrapolated in constant fashion. There's no reason for the Beziér handles
to be ignored in such a case.
FCurve evaluation already worked properly, it was just the drawing in the
graph editor and the selectability of the handles that needed adjustments.
Test case is a smaller step towards supporting Vulkan. Other
test cases rely on SSBOs as well so it is better to first satisfy
this step before handling the others.
Even though the dope sheet respects the pinned channels, it did not show the icon to interact with the pinned state.
This adds the icon to the dope sheet as well.
{F14178715}
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D17061
Ref: D17061
n versioning, when converting CD_SCULPT_FACE_SETS to CD_PROP_INT32
the layers were not kept properly ordered by type.
This was discovered while investigating T104053
Differential Revision: D17165
Previously, having the "Encoding speed" set to "slowest" would choose
libaom-av1 first and librav1e second. This change makes Blender choose
librav1e first (and has a fallback to whatever other AV1 codec is
available if librav1e is not installed).
Addresses /T103849 on systems where librav1e codec available.
Reviewed By: sergey, ISS
Maniphest Tasks: T103849
Differential Revision: https://developer.blender.org/D17002
In the previous situation the message was shown for Apple devices.
But this is not correct and confusing.
- Apple with Metal backend are supported, OpenGL on Apple isn't
- Legacy devices on Windows or Linux are also not supported.
This change will check that the capabilities of the GPU match the
requirements to use Viewport compositor. Based on those capabilities
a message is shown and the panel is activated.
In File Browser, correct full path creation so that it works correctly
in recursive listings.
See D17175 for more details.
Differential Revision: https://developer.blender.org/D17175
Reviewed by Julian Eisel
Blender crashes when Simplify is enabled and set to 0.
This is because mesh_to_volume_grid returns nullptr at voxel size 0.
A simple null-check fixes this problem.
Differential Revision: https://developer.blender.org/D17122
`WM_modalkeymap_items_to_string` is expected to always return a string.
But in the special case of zero length, the returned string was not
terminated with `'\0'`.
This can cause problems with the header of the knife tool for example.
It always uses the returned string.
(This issue was observed when investigating T103804).
This reverts commit 11a9578a19.
Reverting this because there was a miscommunication between Simon and me. Shortly
before I committed the change, Simon noticed that there are cases when "Hide Value"
is checked to hide the value in a group node, but we still want to show the value
in the modifier.
Normals falloff mask is created inverted compared
to how other falloffs work. It's now un-inverted
in a final step at the end.
Also exposed the normals falloff smooth steps as
an RNA property.
When the "Hide Value" option of a group input is enabled, only its name
is displayed in group nodes. Modifiers should have the same behavior.
However, for modifiers, only showing the name does not make sense
when the user can't edit the value. Therefore the value is not shown at all.
The image manager used to handle OSL textures on the GPU by
default loads images after displacement is evaluated. This is a
problem when the displacement shader uses any textures, hence
why the geometry manager already makes the image manager
load any images used in the displacement shader graph early
(`GeometryManager::device_update_displacement_images`).
This only handled Cycles image nodes however, not OSL nodes, so
if any `texture` calls were made in OSL those would be missed and
therefore crash when accessed on the GPU. Unfortunately it is not
simple to determine which textures referenced by OSL are needed
for displacement, so the solution for now is to simply load all of
them early if true displacement is used.
This patch also fixes the result of the displacement shader not
being used properly in OptiX.
Maniphest Tasks: T104240
Differential Revision: https://developer.blender.org/D17162
Was using squared cosine instead of cosine. The problem is obvious for large spread angles.
|before|after
|{F14220946}|{F14220948}
The images are generating by returning `floor(spotmask)` in function `spot_attenuation()` in `lights_lib.glsl`.
Thoses are added for better component masking syntax.
This avoids the harder to read `float2(my_vec4)`.
This is not meant to be fully usable swizzling support but could be
extended in the future.
Straightforward port. I took the oportunity to remove some C vector
functions (ex: `copy_v2_v2()`).
Reviewed By: antoniov
Differential Revision: https://developer.blender.org/D17160
Reduces the GLSL to MSL translation stage of shader compilation from 120 ms to 5 ms for complex EEVEE materials. This manifests in faster overall compilations, and faster cache hits for secondary compilations, as the MSL variant is needed as a key.
Startup time is also improved for both first-run and second-run. Note that this change does not affect shader compilation times within the Metal API.
Also disables shader output to disk
Authored by Apple: Michael Parkin-White
Ref T96261
Depends on D16990
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D17033
Replace texelFetch calls with a texture point-sample rather than a textureRead call. This increases texture cache utilisation when mixing between sampled calls and reads. Bounds checking can also be removed from these functions, reducing instruction count and branch divergence, as the sampler routine handles range clamping.
Authored by Apple: Michael Parkin-White
Ref T96261
Depends on D16923
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D17021
Test results were generated from incorrect code.
Code was fixed, but test results weren't updated.
This patch updates the test results to match the implementation.
- `projection_perspective.w.w == 0.0`
Also minor changes in comments:
- Reference BLENDER_HISTORY_FILE instead of the literal file-name
(simplifies looking up usage).
- Use usernames in tags, as noted in code-style.
Authored by Sonny Campbell.
Currently when importing a USD file, some of the camera properties are
ignored, or the units are not converted correctly from USD world units.
On import we currently set the focal length, but not the camera sensor
size (horizontal and vertical aperture), so the camera field of view
is wrong. The sensor size information is in the USD file, but is ignored
for perspective cameras.
USD uses "tenth of a world unit" scale for some physical camera properties
like focal length and aperture.
https://graphics.pixar.com/usd/release/api/class_usd_geom_camera.html#UsdGeom_CameraUnits
I have added the UsdStage's metersPerUnit parameter to the ImportSettings
so the camera can do the required conversion on import. This will convert from
the USD file's world units to millimeters for Blender's camera settings.
Reviewed by: Sybren and makowalski.
Differential Revision: https://developer.blender.org/D16019
The `MultiDevice` implementation of `get_cpu_osl_memory` returns a
nullptr when there is no CPU device in the mix. As such access to that
crashed in `update_osl_globals`. But that only updates maps that are not
currently used on the GPU anyway, so can just skip that when the CPU
is not used for rendering.
Maniphest Tasks: T104216
The glsl files + create infos of shaders that are only used
during development where still being compiled into blender.
This isn't needed and shouldn't be included. This change will
only include them when WITH_GTEST and WITH_OPENGL_DRAW_TESTS are
enabled. All other cases those files will be skipped.
Resolve an issue where released buffers were returned to the reusable memory pool before GPU work associated with these buffers had been encoded. Usually release of memory pools is dependent on successful completion of GPU work via command buffer callbacks. However, if the pool refresh operation occurs between encoding of work and submission, buffer ref-count is prematurely decremented.
Patch also ensures safe buffer free lists are only flushed once a set number of buffers have been used. This reduces overhead of small and frequent flushes, without raising the memory ceiling significantly.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D17118
Compute test case still used legacy API to construct
GLSL shaders. This change will migrate it to use the
GPUShaderCreateInfo's.
In preparation to run test-cases against non-opengl
back-ends.
Due to shader global scope emulation via class interface, global constant arrays in shaders are allocated in per-thread shader local memory. To reduce memory pressure, placing these constant arrays inside function scope will ensure they only reside within device constant memory. This results in a tangible 1.5-2x performance uplift for the specific shaders affected.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D17089
Paths to vulkan libraries, paths and related components were
hardcoded in the platform cmake file. This patch separates
this by using adding CMake modules for Vulkan and ShaderC.
This change has only been applied to the macOs configuration as
that is currently our main platform for development. Other platforms
will be added during the development of the Vulkan back-end.
Metal backend does not support primtiive restart for point primtiives. Hence strip_restart_indices removes restart indices by swapping them to the end of the index buffer and reducing the length.
An edge-case existed where all indices within the index buffer were restarts and no valid swap-index would be found, resulting in a buffer underflow.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D17088
This patch adds support for compilation and execution of GLSL compute shaders. This, along with a few systematic changes and fixes, enable realtime compositor functionality with the Metal backend on macOS. A number of GLSL source modifications have been made to add the required level of type explicitness, allowing all compilations to succeed.
GLSL Compute shader compilation follows a similar path to Vertex/Fragment translation, with added support for shader atomics, shared memory blocks and barriers.
Texture flags have also been updated to ensure correct read/write specification for textures used within the compositor pipeline. GPU command submission changes have also been made in the high level path, when Metal is used, to address command buffer time-outs caused by certain expensive compute shaders.
Authored by Apple: Michael Parkin-White
Ref T96261
Ref T99210
Reviewed By: fclem
Maniphest Tasks: T99210, T96261
Differential Revision: https://developer.blender.org/D16990
Recent changes in our GLSL libraries didn't compile on Vulkan. This
change reverts a compile directive that was removed, but required
in order to compile using the Vulkan backend.
Extract:
- EEVEE: Compiling Shaders (the same message exists in EEVEE Next, but
it uses string concatenation and I don't know yet how to deal with
those--see T92758)
Disambiguate:
- Pan (audio, camera)
- Box (TextSequence)
- Mix (noun in constraints, GP materials)
- Volume (object type, file system)
- Floor (math integer part, 3D viewport horizontal plane)
- Impossible to disambiguate the constraint name because
bConstraintTypeInfo doesn't have a context field.
- Show Overlay (in the sequence editor, use the same message as other
editors to avoid a confusion with the Frame Overlay feature, also
called "Show Overlay")
Additionally, fix a few issues reported by Joan Pujolar (@jpujolar)
in T101830.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D17114
When moving or linking an object to a collection, the report was not
properly translatable. In French for instance, it would give
nonsensical half-translated sentences such as "<Object> moved vers
<collection>", instead of "<Object> déplacé vers <collection>".
Instead, separate the report into the four possible translations (one
or multiple objects, linking or moving). This is very verbose and less
legible, but it ensure the sentences can be properly translated,
including plurals in languages which use grammatical agreement.
In addition, use BKE_collection_ui_name_get() to get the collection
name, because the Scene Collection's name is hardcoded, but it can be
localized.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D17112
This operator updates scene strip internal length to reflect target
scene length. Previously scene strip had to be deleted and added from
scratch. Scene strip length in timeline will not be changed.
The code removed here was intended to be an optimization that
avoids creating an additional node to join multiple attribute sets.
However, that optimization did not work, because it did not take
into account whether the single attribute set is required or not.
Allow to explicitly swap node links by pressing the alt-key while
reconnecting node links. This replaces the old auto-swapping based on
matching prefixes in socket names.
The new behavior works as follows:
* By default plugging links into already occupied (single input)
sockets will connect the dragged link and remove the existing one.
* Pressing the alt-key while dragging an existing node link from one
socket to another socket that is already connected will swap the
links' destinations.
* Pressing the alt-key while dragging a new node link into an already
linked socket will try to reconnect the existing links into another
socket of the same type and remove the links, if no matching socket
is found on the node. This is similar to the old auto-swapping.
Swapping links from or to multi input sockets is not supported.
This commit also makes the link drag tooltip better visible, when using
light themes by using the text theme color.
Reviewed By: Hans Goudey, Simon Thommes
Differential Revision: https://developer.blender.org/D16244
Most operations where strips are duplicated use `SEQ_animation` API,
which handles keyframe animation. Now drivers are handled as well.
When group of strips is duplicated and driver references other strip,
it will still reference original strip. However, this is much better,
than previous behavior, when strip duplication results in "transfer" of
driver from original strip to duplicated one.
Fixes T104141
Simplify `BM_uv_element_map_create` by using `BM_face_calc_area_uv_signed`.
Remove unused UV winding code in `BM_uv_vert_map_create`.
Fixes unlikely memory leak in `BKE_mesh_uv_vert_map_create`.
No functional changes.
Differential Revision: https://developer.blender.org/D17137
This adds a new operator: bpy.ops.mesh.flip_quad_tessellation()
This operator rotates the internal loops of the selected quads, allowing
the user to control tessellation without destructively altering the
mesh.
{F14201995}
This operator can be found in the "Face" menu (Ctrl+F) under "Face
Data".
{F14201997}
Reviewed By: campbellbarton, dbystedt
Differential Revision: https://developer.blender.org/D17056
Some miscellaneous cleanups left over from a fix/cleanup combo:
- Use const variables
- Use the C++ `math` namespace functions
- Use `std::array` for arrays with size known at compile time
- Use `MutableSpan` instead of reference to array
Differential Revision: https://developer.blender.org/D17094
In the node groups for T103730, the "Points of Curve" node is often used to
retrieve the root point of every curve. Since the curve point offsets array
already contains that data directly, we can detect this as a special case and
avoid all the other work.
Differential Revision: https://developer.blender.org/D17128
MoltenVK wasn't found as it was previous part of lib/vulkan.
as lib/vulkan now doesn't contain
the full sdk, we will use a moltenvk folder.
At this moment the moltenvk folder isn't filled, but will eventually be.
These changes were authored by Michael B Johnson (drwave).
The default Blender USD export currently produces files that trigger
errors in the usdchecker that ships with USD 22.11.
The changes are:
- Set the defaultPrim if no defaultPrim is set. This sets it to the
first prim in the hierarchy which matches the behaviour of Pixar's
referencing (where referencing a USD layer without a defaultPrim will
pick the first prim) as well as matches the logic in Pixar's Maya USD
exporter code.
- Applies the MaterialBindingAPI to prims with material binding
attributes. This is a relatively new requirement for USD as it will
help for efficiency with upcoming changes to Hydra.
- Removes the preview scope in the USD shader hierarchy, because it
is no longer valid for shaders to have any non-container ancestors in
their hierarchy up until the enclosing Material prim.
Reviewed by: Michael Kowalski
Differential Revision: https://developer.blender.org/D17041
Removing all OSL script nodes from the shader graph would cause that
graph to no longer report it using `KERNEL_FEATURE_SHADER_RAYTRACE`
via `ShaderManager::get_graph_kernel_features`, but the shader object
itself still would have the `has_surface_raytrace` field set.
This caused kernels to be reloaded without shader raytracing support, but
later the `DEVICE_KERNEL_INTEGRATOR_SHADE_SURFACE_RAYTRACE`
kernel would still be invoked since the shader continued to report it
requiring that through the `SD_HAS_RAYTRACE` flag set because of
`has_surface_raytrace`.
Fix that by ensuring `has_surface_raytrace` is reset on every shader update,
so that when all OSL script nodes are deleted it is set to false, and only
stays true when there are still OSL script nodes (or other nodes using it).
Maniphest Tasks: T104157
Differential Revision: https://developer.blender.org/D17140
BKE blendfile should not be allowed to deal with DNA deprectaed data, so
move recent check in rB138b3815e528 into BLO readfile, in a new
`blo_read_file_checks` util that is being called at the very end of main
readfile code (`blo_read_file_internal` and `library_link_end`).
rB7f564d74f9ed (6 years ago!) forgot to clear the deprecated
`Window->screen` pointer on file read for recent-enough .blend files.
This is required since a valid value is always written in .blend files
for that pointer, to ensure backward compatibility.
The issue was never detected so far because that pointer is explicitely
reset to NULL after filewrite, which includes any memfile undostep
write, and usually existing UI data is re-used instead of loading the
one from the .blend file, so thedden assert in `blo_lib_link_restore`
would never be triggered.
Now moved the assert at the end of `setup_app_data` to ensure it always
get checked.
This patch adds a draw_ui_list() function, which is a wrapper around
layout.template_list(). It implements generic add/remove/move buttons,
passing the correct "row" integer to template_list(), as well as a
drop-down menu, if provided, making it a complete solution for
consistent UILists for addons.
Differential Revision: https://developer.blender.org/D14119
The node does not support blurring booleans, but that was not handled
property in link drag search.
Differential Revision: https://developer.blender.org/D17139
Only the area where the source buffer will be drawn on the destination buffer
will be evaluated. This will improve performance in sequencer and image editors as
less calcuations needs to happen.
Micro improvement to store delta uv per subsample. This reduces
branching that might happen on the CPU, but also makes it possible
to add other sub-sampling filters as well.
No changes for the end-user.
Adds new options to UV Face selection in the UV Editor, with UV > Select > Select Similar
In multi object edit mode, "Similar Object" selects faces which have the same object.
"Similar Winding" will select faces which have the same winding, i.e. are they
facing upwards or downwards.
Resolves: T103975
Differential Revision: https://developer.blender.org/D17125
Change the 2D Gizmo drawing function to provide a usable transform matrix,
if it would otherwise be degenerate.
Differential Revision: https://developer.blender.org/D17113
If an object has a geometry nodes modifier, the UVs on that object might change
in response to any change on any other object.
Now we will redraw the UV editor on any object change, not just the active object.
Differential Revision: https://developer.blender.org/D17124
Based on T99607:
- Existing Angle Control shortcuts are removed
- Voxel, Dyntopo and Hair resolution shortcuts are remapped to `R`
Since voxel remeshing is not compatible with dyntopo, each can use the shortcut `R` for the remeshing resolution without causing a conflict.
The shortcut `R` is not currently used for anything important.
The angle control menu is commonly not used.
And sculpt mode is only coincidentally inheriting the rotate operator shortcut on `R` because nothing else is mapped to the key.
Reviewed By: Julien Kaspar and Hans Goudey and Joseph Eagar
Differential Revision: https://developer.blender.org/D16511
Ref D16511
This addressed feature request T99811.
Added the following features to fully support importing USDZ archives:
- Added .usdz to the list of supported extensions.
- Added new USD import options to copy textures from USDZ archives. The
textures may be imported as packed data (the default) or to a directory
on disk.
- Extended the USD material import logic to handle package-relative texture
assets paths by invoking the USD asset resolver to copy the textures from
the USDZ archive to a directory on disk. When importing in Packed mode,
the textures are first saved to Blender's temporary session directory
prior to packing.
The new USD import options are
- Import Textures: Behavior when importing textures from a USDZ archive
- Textures Directory: Path to the directory where imported textures will
be copied
- File Name Collision: Behavior when the name of an imported texture file
conflicts with an existing file
Import Textures menu options:
- None: Don't import textures
- Packed: Import textures as packed data (the default)
- Copy: Copy files to Textures Directory
File Name Collision menu options:
- Use Existing: If a file with the same name already exists, use that
instead of copying (the default)
- Overwrite: Overwrite existing files
Reviewed by: Bastien
Differential Revision: https://developer.blender.org/D17074
In 7536abbe16 changes make possible to input field as Count field.
But changes of declaration probably was forgotten. So now this input
can take field and node will be work. But input link was red. This
patch resolves this issue.
Differential Revision: https://developer.blender.org/D17131
When the sort weights are a single value, they have no effect,
so sorting the relevant indices for the element will be wasted work.
The sorting is expensive compared to the rest of the node. In my
simple test of the points of curve node, it became 6 times faster
when the weights are a single value.
On some occasions, as in cases where transform operations are triggered
via gizmos, the constrain orientations that can be toggled with
multiple clicks of X, Y or Z were repeated.
There is no use in maintaining repeated orientations.
Image Transform use linear or nearest sampling during editing and exporting.
This gets sampling is fine for images that aren't scaled. When sequencing
however you mostly want use some sort of scaling, that leads to poorer
quality.
This change will use sub-sampling to improve the quality. This is only
enabled when rendering. During editing the subsampling is disabled to
keep the user interface reacting as expected.
Another improvement is that image transform is stopped at the moment
it hadn't sampled at least 4 samples for a scan line. In that case we
expect that there are no further samples that would change to result.
In a future patch this could be replaced by a ray/bounding bo intersection
as that would remove some unneeded loops in both the single sampled and
sub sampled approach.
Add an `object.modifiers.move()` method, similar to the one
for constraints and some other collections. Currently reordering
modifiers requires using operators, which depend on context.
The implementation is straightforward, except for the need to
make the severity of errors reported by the underlying editor
code into a parameter, so that the new Python API function
reports any problems as Python exceptions, and refactoring
the code to allow aborting a blocked move before making any
changes. I also turn the negative index condition from an assert
into an error.
Differential Revision: https://developer.blender.org/D16966
The list was populated from the base (unevaluated) object, but now that
Geometry nodes can generate various layers this is impractical..
Differential Revision: https://developer.blender.org/D17093
The clear functions for grease pencil data/frame/layer
was not followed by immediate update in the viewport.
Some notifiers were missing in the rna definition of these functions,
which are added in by this patch.
Reviewed By: Antonio Vazquez
Differential Revision: https://developer.blender.org/D17120
Only one point should be used to create a reference rotation for other
points to follow. Using two caused the resulting twist to be
asymmetric, especially noticeable on symmetrical, cyclic curves.
An update to [0] which broke curve_to_mesh & deform_modifiers tests,
now this change only applies to cyclic curves as the final result was
much greater for non-cyclic curves because of a difference between how
end-point directions are calculated (see code-comments for details).
Alternate fix to D11886 which caused T101843.
[0]: 36a82314a0.
Regression in [0] which cleared the redo-panel if an operator added
its own undo step. This worked for sculpt to fix T101743, but caused
the redo-panel to be cleared for actions who's undo steps where created
by nested operators (which is the case for the spin operator).
Fix by checking an undo-step is added without registering an operator.
[0]: f68e50a263
Various new CI tests for USD Import / Export functionalty:
Import:
- Added mesh import tests for topology types and multiple UV sets. (Python)
Export:
- Added a verification tests for mesh topology. (C++)
- Added a test to make sure UsdPreviewSurface export conversion of materials
is correct. (C++)
Reviewed by: Sybren and Hans.
Differential Revision: https://developer.blender.org/D16274
This reverts commit 36a82314a0.
as it has broken tests for the last day and a half, it likely just
needs a test file update, but we can't keep this failing longer
than it already has.
A mistake in the node type descriptions gave the node a description for
the reverse curve node.
Differential Revision: https://developer.blender.org/D17111
Added a new Import All Materials USD import option. When this
option is enabled, USD materials not used by any geometry will
be included in the import. Imported materials with no users
will have a fake user assigned.
Maniphest Tasks: T97195
Differential Revision: https://developer.blender.org/D16172
This commit fixes T100674, Renamed the "axis" label under viewport display
panel to "axes" in object properties.
Differential Revision: https://developer.blender.org/D16650
We should always have an active vertexgroup (making sure this is the
case was just not happening on the greasepencil side).
Now do this (similar to what is done for other object types in
`object_defgroup_remove_common`).
Maniphest Tasks: T104089
Differential Revision: https://developer.blender.org/D17091
User site-packages were disabled unless `--python-use-system-env`
argument was given. This was done to prevent Blender's Python
unintentionally using modules that happened to be installed locally,
however it meant so pip installing modules from Blender would fail to
load those modules (for some users).
Enable user site-packages since it's needed for installing additional
packages via pip, see code-comments for details.
Resolves T104000.
- Don't call exit() when memory allocation fails, while unlikely
internal failures should not be exiting the application.
- Don't print a message when the directory is empty as it's
unnecessarily noisy.
- Print errors the the stderr & include the reason for opendir failing.
When constructing run-time paths native slashes are preferred as WIN32
doesn't have full support for forward slashes in paths.
It can also cause problems when performing exact matches on paths
which are normalized, where normalizing one of the paths makes
comparisons fail.
Using the system native slash would have avoided T103385.
Originally, function `sequencer_generic_invoke_xy_guess_channel`
looked in what channel the last strip of the same type is and the
channel used for new strip placement. This was changed as a workaround
when sound strips were added below movie strips
(58bea005c5).
Now these workarounds aren't necessary, but the function was left
unchanged.
Current logic is for adding movie strip to channel 1 is:
- Sound is added to channel 1
- Video is added to channel 2
- If there is only video, it is added to channel 1
Since movie may, or may not contain sound, it is not possible to align
added strips in a way that was done before, unless timeline is analyzed
more in detail, but this would be quite inefficient.
Also, note, that the code did not work, if strip is added next to
previous one, so it mostly did not work as intended.
This commit changes:
- Fix alignment not working when strip is added right next to previous
strip
- Assume that movie strips have sound strip underneath it, so channel
below last movie strip is picked
- For other strip types, pick channel of the last strip of same type
Ultimately, the code is still rather weak, and better system, like using
channel where strip was manually moved, or concept of "typed channels"
would improve this feature.
There is not much documentation on the "snap_point" property, but by
code it is possible to note that it serves to set a target snap point
and is of internal use as it is hidden from the Redo panel.
However, this property was still very dependent on Tools settings and
if set to an operator's call, it changes the scene configurations
inadequately.
Therefore,
- remove this dependency from UI for rotation and resize operators,
- do not change the state of the snap in the scene and
- cleanup the code.
Some transform modes are changeable, so callbacks should be reset
together.
Currently the unchanged `transform_matrix` callback is not a major
issue as it is only used for gizmos and gizmos stop updating when
changing the operator type.
Use a Vector<std::string> , instead of a Set<std::string> as a Set does
not keep the same order when iterating over it.
Differential Revision: https://developer.blender.org/D17103
In many cases when reading undo memfile, n the 'restore id from old
main' part of the process, the 'id_old' is not set, which means that
the call to `BKE_main_idmap_insert_id` would try to dereference a `nullptr`.
In practice this is likely not an issue (see comment in code for details),
but at least explicitely check for a nullptr `id_old` pointer.
Would deffer actual cleanup of this area for after 3.5 is branched out.
Currently only affects 'UI' IDs (WindowManager, Screen, etc.), but in
the future other types may be affected as well.
NOTE: this is only used in readfile code itself, not in the
post-processing performed by `setup_app_data`, as this code is too
specific for such generic handling.
Based on "Sampling the GGX Distribution of Visible Normals" by Eric Heitz
(https://jcgt.org/published/0007/04/01/).
Also, this removes the lambdaI computation from the Beckmann sampling code and
just recomputes it below. We already need to recompute for two other cases
(GGX and clearcoat), so this makes the code more consistent.
In terms of performance, I don't expect a notable impact since the earlier
computation also was non-trivial, and while it probably was slightly more
accurate, I'd argue that being consistent between evaluation and sampling is
more important than absolute numerical accuracy anyways.
Differential Revision: https://developer.blender.org/D17100
This gives closer results to what I've seen in papers and other renderers when
using the code to precompute albedo later (to replace MultiGGX).
It's usually a tiny difference, the only case where I've seen it matter is
in the `shader/node_group_float.blend` test - but that's a (single-scatter) GGX
closure with 0.9 roughness, so it's not too surprising. In any case, the new
result looks closer to Eevee, so that's good I guess.
Differential Revision: https://developer.blender.org/D17099
Simon mentioned that this gets in the way more than it helps. No geometry
sockets currently show up in the modifier panel. People may build node groups
that have multiple geometry inputs that can be used when the group is used
as node instead of as modifier.
In the future we could also allow e.g. choosing an object to pass into a geometry
socket. That has the problem that we'd also have to duplicate other functionality
of the Object Info node (original vs. relative space).
There were two issues:
* The `new_point_counts_per_curve` was one too large, resulting in
`interpolate_from_neighbors` reading invalid memory.
* Writing the counts into the existing offsets array didn't quite work
because there can be a collision at the offset right between the
last old curve and the first new point. There was a race condition
where this value could be read and written at the same time.
When some path property was displayed in the File Browser, clicking the
icon to open a file browser dialog to choose a file/directory would
show an error. While this makes sense when you are already in a file
browser dialog (we don't support such nested file browser dialogs),
allow it when the file browser is opened as a normal editor, not as a
dialog.
Current implementation had some faulty assumtions and had some work
arounds for crashes that were actually limitation of the implementation.
The main reason for this was that the implementation didn't add new
primitives in the same direction it was already adding. Some when
incorrect behavior was detected it was assumed that the part wasn't
manifold (anymore) and didn't fix that part of the mesh.
The new implementation will extract a solution and use this solution
also as the order to generate primitives in uv space.
This patch fixes several crashes and improves the overall quality
when fixing seam bleeding. It also adds additional debug tools
(print_debug) implementation in order to find issues faster in the
future.
Regression in [0] caused by a change where path joining would
replace a forward slash with a back-slash when joining paths WIN32.
Now the directory is always used as a prefix for the paths returned
by BLI_filelist_dir_contents which resolves the regression.
[0]: 9f6a045e23
`remember_deformed_curve_positions_if_necessary` has to be called before
topology changing operations on curves. Otherwise the crazy-space data
is invalid.
The help circles to fill areas were rotated with the object rotation,
but as the stroke is part of the object, apply the rot matrix again
produced a double rotation, so it can be removed.
Two properties are now exposed in python API :
time of each point, and inittime of each stroke.
Reviewed by: Antonio Vazquez
Differential Revision: https://developer.blender.org/D17104
Speckles and missing lights were experienced in scenes with Nishita Sky
Texture and a Sun Size smaller than 1.5°, such as in Lone Monk and Attic
scenes.
Increasing the precision of cosf fixes it.
Only one point should be used to create a reference rotation for other
points to follow. Using two caused the resulting twist to be
asymmetric, especially noticeable on symmetrical, cyclic curves.
Alternate fix to D11886 which caused T101843.
After object-mode undo (memfile undo), the value wan't lost, but the
property would be temporarily converted back to integer type in order
to be forward compatible. Now only use the forward compatible
writing when writing undo steps. Auto-saves and similar files are
currently not forward compatible anyway.
Make the functions more flexible and more generic by changing the curves
arguments to the curve offsets. This way, theoretically they could become
normal utility functions in the future. Also do a consistency pass over
the algorithms that generate new curves geometry for naming and
code ordering, and use of utility functions. The functions are really
quite similar, and it's much easier to tell this way.
The most time-consuming operation in merge by distance is to find
duplicate faces (faces that are different but have the same vertices).
Therefore, some strategies were planned to optimize this algorithm:
- Store the corner indices in an array thus avoiding multiple calls of `weld_iter_loop_of_poly_next`;
- Create a map of polygons linked to edges instead of linked to vertices - this decreases the number of connections and reduces the calculation of the intersection of polygon indices.
There are other fields to optimize, like reusing the `wpolys` array
instead of creating a new array of corner offsets. And join some arrays
as members of the same struct to be used in the same buffer.
But for now, it is already a nice optimization. And the new
`poly_find_doubles` function can be reused in the future to create a
generic utility.
The result of the optimization varies greatly depending on the number
of polygons, the size of each polygon and the number of duplicates.
On average it was something around 2 times faster.
Worst case tested (old vs new): 0.1ms vs 0.3ms
Best case tested (old vs new): 10.0ms vs 3.2ms
Differential Revision: https://developer.blender.org/D17071
`PBVH_Leaf` nodes are now split into a new `PBVH_TexLeaf`
node type when using the paint brush. These nodes are
split by image pixels, not triangles. This greatly
increases performance when working with large
textures on low-poly meshes.
Reviewed By: Jeroen Bakker
Differential Revision: https://developer.blender.org/D14900
Ref: D14900
A noticeable (>5%) performance regression in oneAPI backend came with
a501a2dbff. Updating to latest graphics
compiler from driver 101.4032 fixes it.
I've tested it with current min-supported drivers and it runs well but
since compatibility of graphics compiler with older drivers isn't
guaranteed, I'm also bumping the min-supported driver versions.
If end-users consider latest drivers too fresh to switch to (version
isn't released as stable on Linux as of today but should be before
Blender 3.5 release), CYCLES_ONEAPI_ALL_DEVICES=1 env variable can be
used.
Intel Graphics Compiler on Linux will be updated in a later commit
so we can then close D16984.
Reviewed By: sergey, LazyDodo
The problem was that the stroke array was not reset for
each iteration of the loop, so the second time around,
the array was not initialized correctly and
was left with a NaN value.
The USD Preview Surface material import feature is now considered
stable, so this patch removes this option from the Experimental
category in the UI.
The Import USD Preview option is now enabled by default.
The Experimental box has been removed.
A new Materials box has been added to group the Import
USD Preview Surface, Set Material Blend and Material
Collision Mode options.
Reviewed by: Sybren
Differential Revision: https://developer.blender.org/D17053
Rewrite of the Workbench engine using C++ and the new Draw Manager API.
The new engine can be enabled in Blender `Preferences > Experimental > Workbench Next`.
After that, the engine can be selected in `Properties > Scene > Render Engine`.
When `Workbench Next` is the active engine, it also handles the `Solid` viewport mode rendering.
The rewrite aims to be functionally equivalent to the current Workbench engine, but it also includes some small fixes/tweaks:
- `In Front` rendered objects now work correctly with DoF and Shadows.
- The `Sampling > Viewport` setting is actually used when the viewport is in `Render Mode`.
- In `Texture` mode, textured materials also use the material properties. (Previously, only non textured materials would)
To do:
- Sculpt PBVH.
- Volume rendering.
- Hair rendering.
- Use the "no_geom" shader versions for shadow rendering.
- Decide the final API for custom visibility culling (Needed for shadows).
- Profile/optimize.
Known Issues:
- Matcaps are not loaded until they’re shown elsewhere. (e.g. when opening the `Viewort Shading` UI)
- Outlines are drawn between different materials of the same object. (Each material submesh has its own object handle)
Reviewed By: fclem
Maniphest Tasks: T101619
Differential Revision: https://developer.blender.org/D16826
Improve handling for cases where maximum in-flight command buffer count is exceeded. This can occur during light-baking operations. Ensures the application handles this gracefully and also improves workload pipelining by situationally stalling until GPU work has completed, if too much work is queued up.
This may have a tangible benefit for T103742 by ensuring Blender does not queue up too much GPU work.
Authored by Apple: Michael Parkin-White
Ref T96261
Ref T103742
Depends on D17018
Reviewed By: fclem
Maniphest Tasks: T103742, T96261
Differential Revision: https://developer.blender.org/D17019
Required by Metal backend to have correct usage flags for textures which are read by host.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D17020
Affecting render output preview when tone mapping is used, and EEVEE scenes such as Mr Elephant rendering in pink due to missing shaders.
Authored by Apple: Michael Parkin-White
Ref T103635
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T103635, T96261
Differential Revision: https://developer.blender.org/D16923
AMD GPUs do not appear to produce consistent results with other GPUs when using textureGather in the Metal backend. Disabling for now to ensure correct function of outline rendering.
This may require an additional sub-pixel offset in the texture sampling calls, to achieve correct behaviour.
Authored by Apple: Michael Parkin-White
Ref T103412
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T103412, T96261
Differential Revision: https://developer.blender.org/D16934
This patch fixes an issue where Blender 3.5 alpha with the Metal GPU backend enabled on Japanese macOS fails to compile shaders and crashes on startup.
In a Japanese environment, `defaultCStringEncoding` is the legacy MacJapanese encoding, and it erroneously converts backslashes (0x5c) to Yen symbols (¥).
Therefore, Metal shader compile fails with the following log and Blender crashes.
```
2022-12-29 13:50:10.200 Blender[13404:246707] Compile Error - Metal Shader Library (Stage: 0), error Error Domain=MTLLibraryErrorDomain Code=3 "program_source:225:74: error: non-ASCII characters are not allowed outside of literals and identifiers
template<typename T, access A = access::sample> struct STRUCT_NAME { ¥
^
program_source:226:14: error: no template named 'TEX_TYPE'
thread TEX_TYPE<T, A> *texture; ¥
^
program_source:226:39: error: non-ASCII characters are not allowed outside of literals and identifiers
thread TEX_TYPE<T, A> *texture; ¥
^
program_source:227:29: error: non-ASCII characters are not allowed outside of literals and identifiers
thread sampler *samp; ¥
^
...
```
We can use `stringWithUTF8String` instead.
Reviewed By: fclem, MichaelPW
Differential Revision: https://developer.blender.org/D16881
In the new Draw Manager, when the same DrawGroup has both front and back facing instances, the front facing instances don't offset their indices accordingly.
Differential Revision: https://developer.blender.org/D17069
This changes `make update` to download the assets repository automatically
if it does not exist already. If it does exist, it is updated. Precompiled libraries
have the same behavior. This is required for T103620.
`pipeline_config.yaml` is updated as well for the builtbot.
Differential Revision: https://developer.blender.org/D17090
The call to BKE_volume_grid_openvdb_for_write() was accidentally removed
in D15806. This adds it to BKE_volume_grid_transform_matrix_set() to
avoid that it happens again when that function is used.
Differential Revision: D16949
The code in questions comes from Shewchuk's triangle code, which
hasn't been updated to fix the out-of-buffer access problem
that ASAN finds in the delaunay unit test. The problem is benign:
the code would exit the loop before using the value fetched from
beyond the end of the buffer, but to make ASAN happy, I put in
a couple extra tests to not fetch values that aren't going to be used.
There's a compromise of a code parameter called BEVEL_GOOD_ANGLE,
and bugs T44961, T86768, T95335, and this one, are all about problems
with various values of that parameter. If an angle of an adjacent
non-beveled edge is too close to that of the beveled edge, then you
get spikes. The BEVEL_GOOD_ANGLE says that if you are within that
angle difference, then no bevel happens. If the value is too small
then one gets spikes for certain models people build; if the value
is too large, then other people are annoyed that no bevel happens.
Hopefully this compromise in this commit is the final one I will do
before switching to Bevel v2, where none of this should be an issue.
Regression in [0] caused mouse wheel events over windows without focus
to use the modifier state at the point the window was de-activated.
Now un-focused windows have all events release, when focused again
modifier press events are set again.
[0]: 8bc76bf4b9
This can improve performance in some circumstances when there are
vectorized and/or unrolled loops. I especially noticed that this helps
a lot while working on D16970 (got a 10-20% speedup there by avoiding
running into the non-vectorized fallback loop too often).
This isn't correct as window activation is handled separately
from the cursor entering/leaving a window.
This would call de-activate when the cursor moved outside the window
even though the window remained focused.
Rely on focus changes which already handle activate/deactivate events.
Caused by {rB841df831e89d} and {rB3558bb8eae75}.
These commits moved flags from `eLineArtGPencilModifierFlags` to
`eLineartMainFlags`, but later on in code, these were still evaluated
from the modifiers `flags` (instead of `calculation_flags`).
This resulted in a false condition (`match_output` was assumed true but
it wasnt), leading to a wrong codepath taken.
This is now corrected (`calculation_flags` need to be passed around for
this as well).
Maniphest Tasks: T103887
Differential Revision: https://developer.blender.org/D17062
This also fixes the layout of boolean properties with the field toggle
visible. This was discussed in the most recent geometry nodes submodule
meeting.
This uses the changes from ef68a37e5d to create IDProperties
for exposed boolean sockets with a boolean type instead of an integer
with a [0,1] range. Existing properties and values are converted
automatically.
For forward compatibility, the properties are switched to the integer
type for saving. Otherwise older versions crash immediately when opening
a newer file. The "Use Attribute" IDProperties aren't changed here,
since that wouldn't have a visible benefit.
Differential Revision: https://developer.blender.org/D12816
This adds 4 collection properties to MeshUVLoopLayer to eventually replace the (MeshUVLoop) .data property.
The added properties are:
.uv
.vertex_selection
.edge_selection
.pin
The direct access to the separate arrays is much more efficient than the access via MeshUVLoop.
Differential Revision: https://developer.blender.org/D16998
Caused by 05952aa94d, which removed the use of the
active tessface UV pointer on meshes but didn't replace it properly with
the equivalend custom data API function.
This improves performance in cases where the Set Position node is "turned off"
by passing `false` into the selection input.
It's possible that the node still takes some time in this case currently, because
it is destructing the input fields which may reference geometries that need
to be destructed as well. We could potentially change this node (and others)
so that the field inputs are only requested when the selection is not a
constant `false`.
This adds the following operators to edit mode:
- `select_all`
- `select_random`
- `select_end`
Differential Revision: https://developer.blender.org/D17047
This adds an `UndoType` for the `Curves` object, for edit mode.
For now, this will only store the `CurvesGeometry` at every step.
Other properties such as the `selection_domain` or the `surface` object
will have to be dealt with in subsequent commits.
Differential Revision: https://developer.blender.org/D16979
This was not done originally, because one had to iterate over all curves
to get the number of points which had some overhead. Now the number
of points is stored all the time anyway.
The `fix_link_cycles` function added in rB2ffd08e95249df2a068dd did not
handle the case correctly when there are multiple cycles going through
the same socket.
Existing path selection & new path picking included without UV's.
Now limit objects to those with UV's.
Also remove use of CTX_wm_view3d(C) in the UV editor it would be NULL,
but it doesn't makes sense to use the 3D viewport for UV operations
even if it was available.
This adds a new `Interpolate Curves` node. It allows generating new curves
between a set of existing guide curves. This is essential for procedural hair.
Usage:
- One has to provide a set of guide curves and a set of root positions for
the generated curves. New curves are created starting from these root
positions. The N closest guide curves are used for the interpolation.
- An additional up vector can be provided for every guide curve and
root position. This is typically a surface normal or nothing. This allows
generating child curves that are properly oriented based on the
surface orientation.
- Sometimes a point should only be interpolated using a subset of the
guides. This can be achieved using the `Guide Group ID` and
`Point Group ID` inputs. The curve generated at a specific point will
only take the guides with the same id into account. This allows e.g.
for hair parting.
- The `Max Neighbors` input limits how many guide curves are taken
into account for every interpolated curve.
Differential Revision: https://developer.blender.org/D16642
During 3D texturing the uv islands are extended in order to fix seam bleeding
for manifold parts of the input mesh. This patch adds a `print_debug` method
on UVIsland that generates a python script. This script can be copy-past
into the Python Console to show the generated geometry.
This script can be extended to show the extracted border and use face colors
for showing internal decisions.
Swap-buffers was being deferred (to prevent it being called
from the event handling thread) however when it was called the
OpenGL context might not be active (especially with multiple windows).
Moving the cursor between windows made eglSwapBuffers report:
EGL Error (0x300D): EGL_BAD_SURFACE.
Resolve this by removing swapBuffer calls and instead add a
GHOST_kEventWindowUpdateDecor event intended for redrawing
client-side-decoration.
Besides the warning, this results an error with LIBDECOR window frames
not redrawing when a window became inactive.
The name SAFE_AREAS_OT_preset_add lead to "Safe Areas" having it's own
section in the operator API docs. Name CAMERA_OT_safe_areas_preset_add
instead. Keep "safe_areas" as the preset directory for users with
existing presets.
Fixes the packing operators that use ED_uvedit_pack_islands_multi
Also fixes UV Select Similar with hidden UV islands.
Packing operators using GEO_uv_parametrizer should remain unchanged.
Add a check to BM_elem_flag_test(efa, BM_ELEM_HIDDEN).
Note that BM_mesh_calc_face_groups doesn't easily support XOR of flags,
requiring logic to be moved to a preprocess step on BM_ELEM_TAG.
Regression in rBe3075f3cf7ce.
Differential Revision: https://developer.blender.org/D17055
The bpy.types page was unreasonably long (over 17k lines).
Resolve by setting the `maxdepth` for this and the `bpy.ops` page too.
This problem showed up in v3.4 release and may be caused by changes
to Sphinx's default behavior as there doesn't seem to be any change
that would cause this in the generated docs.
Path selection support from [0] didn't account for multiple objects in
edit-mode. Now picking the UV also picks the object to operate on.
[0]: ea5fe7abc1
Add:
- ED_object_in_mode_to_index
- ED_object_in_mode_from_index
Useful for operators that act on a non-active object in multi-edit mode,
so the index can be stored for the operators exec function to read back
the value when redoing an action. Needed to resolve T102680.
Fixes bug where other islands sometimes get their masks cleared (or
filled) in strange circumstances. Still need to figure out the
correct behavior for spherical falloff.
Mesh islands (shells) are now calculated on an as-needed
basis and cached inside of a temp attribute,
`sculpt_topology_island_key`. This attribute is updated
as needed when geometry changes (e.g. the trim brush)
or when mesh visibility changes.
This replaces the old behavior where the "topology" automasking
mode would walk the entire mesh on every stroke.
The background evaluation samples the sky discretely, so if the sun is
too small, it can be missed in the evaluation. To solve this, the sun is
ignored during the background evaluation and its contribution is
computed separately.
Add an RNA API function that gives an array of the normals for every control point.
The normals depend on the `normal_mode` attribute, which can currently be
minumum twist or Z-up, though more options are planned. Normals are currently
evaluated on the evaluated points and then sampled back to the control points.
Because that can be expensive, a normal mode that only does a first evaluation
on control points may be important
The function is intended to be used by Cycles, so it doesn't have to implement
the calculation of normals itself. They can be interpolated between control points
and normalized.
For best performance, the function should only be called once, since it does the
full calculation for every control point every time it is called.
Differential Revision: https://developer.blender.org/D17024
Based on discussion about T102962, rename the "Face Set Boundaries" node
to "Face Group Boundaries" and the Accumulate Field node's "Group Index"
socket to "Group ID". This convention of "__ Group" and "Group ID" will
be used more in other nodes in the future.
This commit doesn't affect forwards or backwards compatibility.
The reverse iteration added in e091291b5b didn't handle
the case where there are no nodes properly. Thanks to Iliya Katueshenock
for investigating this.
While we do need higher level utilities for copying attributes
between geometries, this currently isn't used and it's not clear
that it will be the right abstraction in the end.
The default when there is no cyclic attribute is that none of the curves
are cyclic. In the mesh to curve node, avoid creating the attribute with
just false to save time and memory usage. Also avoid looking up the
attribute twice in the trim node.
When all the curves are poly curves, skip the work of building a
separate array of offsets for the evaluated points (which are the
same as the control points). This saves 1-4ms on every reevaluation
in test files with many curves.
Standardizing the process of creating a new CurvesGeometry with
different curve sizes based on an existing curves is helpful, since
there are a few methods to simplify the process that aren't obvious
at first, like filling the offsets with sizes directly and accumulating
them to become sizes.
Also, in the trim curves node, avoid creating the curve types attribute
all the time. Use the special API functions for the types which do
some optimizations automatically. Also use a more consistent
method to copy the curve domain data, and correct some comments.
The same logic from D17025 is used in other places in the curve code.
This patch uses the class for the evaluated point offsets and the Bezier
control point offsets. This helps to standardize the behavior and make
it easier to read.
Previously the Bezier control point offsets used a slightly different standard
where the first point was the first offset, just so they could have the same
size as the number of points. However two nodes used a helper function
to use the same `OffsetIndices` system, so switch to that there too.
That requires removing the subtraction by one to find the actual offset.
Also add const when accessing data arrays from curves, for consistency.
Differential Revision: https://developer.blender.org/D17038
The lookup table method on CPU and the numerical root finding method on
GPU give quite different results. This commit deletes the Beckmann lookup
table and uses numerical root finding on all devices. For the numerical
root finding, a combined bisection-Newton method with precision control
is used.
Differential Revision: https://developer.blender.org/D17050
Previously, transforming a clip (scaling, repeat, etc) wouldn't re-calculate the blend-in and blend-out values, leading to over / undershoot, and a visual clip artifact
Old:
{F14045003}
This patch adds re-calculation logic (new `BKE_nlastrip_recalculate_blend()` method) to the blend-in/out on transformations to clamp values, and avoid over/under shoot.
The `BKE_nlastrip_recalculate_blend()` encapsulates the existing logic for both the `rna_NlaStrip_blend_in_set()` and `rna_NlaStrip_blend_out_set()` methods into a single BKE method that we an execute as needed. The fact that blend-in is first decreased, is strictly on the order of calculation. My suspicion is that //if// the blend-in / blend-our values were working as intended, the RNA set methods would update in order, and we'd experience the same thing. In short, the choice here was to linearly combine the logic, without making any assumptions of my own.
while talking things over with @sybren and @RiggingDojo, they are fine with how this currently works, but there a desire to update how the two values interact with each (ratio scale, etc) in the future.
New:
{F14045024}
{F14045025}
Reviewed By: sybren
Maniphest Tasks: T101369
Differential Revision: https://developer.blender.org/D16720
This makes it possible to use `texture` and `texture3d` in custom
OSL shaders with a constant image file name as argument on the
GPU, where previously texturing was only possible through Cycles
nodes.
For constant file name arguments, OSL calls
`OSL::RendererServices::get_texture_handle()` with the file name
string to convert it into an opaque handle for use on the GPU.
That is now used to load the respective image file using the Cycles
image manager and generate a SVM handle that can be used on
the GPU. Some care is necessary as the renderer services class is
shared across multiple Cycles instances, whereas the Cycles image
manager is local to each.
Maniphest Tasks: T101222
Differential Revision: https://developer.blender.org/D17032
This patch adds markup to specify that certain kernel data constants should not be specialised. Currently it is used for `tabulated_sobol_sequence_size` and `sobol_index_mask` which change frequently based on the aa sample count, trash the shader cache, and have little bearing on performance.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D16968
This patch adds occupancy tuning for the newly announced high-end M2 machines, giving 10-15% render speedup over a pre-tuned build.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D17037
Split the algorithms that find duplicates.
This improves readability and helps us find areas for optimization.
It may also facilitate the implementation of generic utilities.
No functional changes.
Differential Revision: https://developer.blender.org/D16918
Code authored by Michael B Johnson (drwave).
Reviewed by Sybren and makowalski.
This patch addresses a crash that occurs when exporting a
scene to a USD file, when that scene includes a point cloud
object or hair.
Added OB_POINTCLOUD and OB_CURVES enums and a default case
statement in the switch statement in
USDHierarchyIterator::create_data_writer, to avoid dereferencing
a NULL pointer.
Differential Revision: https://developer.blender.org/D16776
`batch_for_shader` is an utility function that creates the correct
vertex buffer based on the given shader. In the shader interface
the `attr_types_` contains the GPUType for each location in the
vertex buffer.
When using Metal, the `attr_types_` was never updated, resulting
in using incorrect or non-existing data types. This patch fixes
this by updating the `attr_types_` when building the shader
interface.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D17042
When using the "normalized" display of FCurves in the
Graph Editor, and also turning on the preview range,
the normalized display would break.
The preview frame range was assumed to be bezt indices,
which is only true when every frame has a key.
Reviewed by: Colin Basnett
Differential Revision: https://developer.blender.org/D16987
Ref: D16987
Similar to rBe97443478e32 and rBe772087ed664, exit early when
texture, collection and world ID has no parent to unlink from.
Reviewed by: Severin, lichtwerk
Differential Revision: https://developer.blender.org/D17017
The line art modifier added a wmNotifier in it's
GpencilModifierTypeInfo.generateStrokes callback which isn't thread-safe
when called from the depsgraph. This was from the original inclusion
of the feature [0] however a more recent optimization to notifier
lookups [1] made the crash occur more frequently.
Remove the notifier as modifiers should not be adding WM level events
and it works without it.
[0]: 3e87d8a431
[1]: 0aaff9a07d
This was the case when using the operator outside of the modifiers panel.
Caused by {rBeae36be372a6}.
In above commit, `DT_layer_items` shared both `DT_TYPE_MPROPCOL_LOOP` |
`DT_TYPE_MLOOPCOL_LOOP` in a single EnumPropertyItem value "Colors".
This is a bit unusual, but probably allowed.
As a consequence, checks for specific datatypes would fail when selecting
such EnumPropertyItem:
- `DT_DATATYPE_IS_MULTILAYERS` (uses `ELEM` to check distinct entries --
would return false)
- `BKE_object_data_transfer_dttype_to_srcdst_index` (would return
`DT_MULTILAYER_INDEX_INVALID`)
These places have now been corrected to take these "special" values into
account.
Another issue was that multiple EnumPropertyItems with the same value
could be created in dt_add_vcol_layers() if attributes of the same
domain, but different color types are in play (could lead to crashes)
and that has also been corrected.
Also: above commit did not give the choice of transfering color
attributes from the vertex domain (only face corner attributes could be
chosen), this has now been added. DT_layer_vert_items (used from the
modifier) already had this included so this was only an issue when using
the operator outside of the modifiers panel.
Since we now feature two domains, the single "VCOL" in the enum has been
split into "COLOR_VERTEX" and "COLOR_CORNER". This will break existing
scripts calling bpy.ops.object.datalayout_transfer and will be marked as
a breaking change in the release notes.
NOTE: there is another bug here when attributes of the same domain, but
different color types are in play and you want to transfer just a single
specific layer (but that is for a separate commit)
Maniphest Tasks: T103400
Differential Revision: https://developer.blender.org/D16935
Goal of this patch is to stop the invocation of OpenGL calls via the bgl module
on a none OpenGL GPU backend, report this as a python deprecation warning
and report this to the user.
## Deprecation warning to developers
```
>>> import bgl
>>> bgl.glUseProgram(0)
<blender_console>:1: DeprecationWarning: 'bgl.glUseProgram' is deprecated and will be removed in Blender 3.7. Report or update your script to use 'gpu' module.
```
## Deprecation message to users
The message to the user is shown as part of the Info Space and as a message box.
{F14159203 width=100%}
{F14158674 width=100%}
During implementation we tried several ideas:
# Use python warning as errors: This isn't fine grained enough and can show incorrect information to the user.
# Throw deprecation as error and use sys.excepthook to report the user message.
This required a custom exception class to identify the bgl deprecation and a CPython handler function to
be set during python initialization. Although this is the most flexible there was a disconnect between the
exception class, exception function and the excepthook registration.
# A variant how we handle autoexec failures. A flag is stored in Global and when set the user message is reported.
Not that flexible, but code is more connected to the boolean stored in the Global struct.
Although using Global struct isn't nice I chose this solution due to its traceability. It is clear to developers
reading the code how the mechanism works by using search all functionality of your IDE.
Reviewed By: MichaelPW, campbellbarton
Maniphest Tasks: T103863
Differential Revision: https://developer.blender.org/D16996
This makes it convenient to build blender without referencing
pre-compiled libraries which don't always work on newer Linux systems.
Previously I had to rename ../lib while creating the CMakeCache.txt
to ensure my systems libraries would be used.
This change ensures LIBDIR is undefined when WITH_LIBS_PRECOMPILED is
disabled, so any accidental use warns with CMake's `--warn-unused-vars`
argument is given.
These warnings can reveal errors in logic, so quiet them by checking
if the features are enabled before using variables or by assigning
empty strings in some cases.
- Check CMAKE_THREAD_LIBS_INIT is set before use as CMake docs
note that this may be left unset if it's not needed.
- Remove BOOST/OPENVDB/VULKAN references when disable.
- Define INC_SYS even when empty.
- Remove PNG_INC from freetype (not defined anywhere).
The original code used `BLI_polyfill_calc` which can create degenerate
triangles during triangulation per T103913. This causes the subsequent
overlap test to produce incorrect results in certain cases. Change to
using a "beauty" fill instead.
Differential Revision: https://developer.blender.org/D17015
There is a utility method on `CurvesGeometry` to build a map of the
curve for each point. Use that in two more places and make sure its
implementation is multithreaded, which gives a slight speedup
in a simple test file.
When doing partial reloads of asset libraries (only reload assets from
the current file, e.g. after undo re-allocated ID pointers), we'd end up
with assets that don't have their asset data read correctly. It would
execute a branch that didn't set the asset library object necessary to
create and store asset representations.
Steps to reproduce were:
* Open .blend file with geometry node assets in there
* In a geometry node editor, press Shift+A to open the add menu
* Cancel
* Move a node
* Undo
* Press Shift+A again
This allows an engine to perform GPU side view specification and let the
draw manager extract the culling informations (bounds).
To this end, the matrices ubo gets exposed to be able to write to it.
`compute_procedural_bounds()` need to be explicitely called before any
main pass using the culling result.
This abstraction is rarely used. It could be replaced by some more
general "query" API in the future. For now it's easier to just compare
pointers in the Set Position node where this was used.
This is possible now, because mesh positions are stored as flat `float3`
arrays (previously, they were stored as `MVert` with some other data
interleaved).
This changes how we access the points that correspond to each curve in a `CurvesGeometry`.
Previously, `CurvesGeometry::points_for_curve(int curve_index) -> IndexRange`
was called for every curve in many loops. Now one has to call
`CurvesGeometry::points_by_curve() -> OffsetIndices` before the
loop and use the returned value inside the loop.
While this is a little bit more verbose in general, it has some benefits:
* Better standardization of how "offset indices" are used. The new data
structure can be used independent of curves.
* Allows for better data oriented design. Generally, we want to retrieve
all the arrays we need for a loop first and then do the processing.
Accessing the old `CurvesGeometry::points_for_curve(...)` did not follow
that design because it hid the underlying offset array.
* Makes it easier to pass the offsets to a function without having to
pass the entire `CurvesGeometry`.
* Can improve performance in theory due to one less memory access
because `this` does not have to be dereferenced every time.
This likely doesn't have a noticable impact in practice.
Differential Revision: https://developer.blender.org/D17025
Struct members loc/size were misleading as they read as if the object
data stored object level transform channels. Rename these to match RNA
with a `texspace_*` prefix to make it clear these struct members only
apply to texture-space transform.
Also rename ME_AUTOSPACE & ME_AUTOSPACE_EVALUATED to
ME_TEXSPACE_FLAG_AUTO & ME_TEXSPACE_FLAG_AUTO_EVALUATED.
Give the "Value" input a higher search weight than the "Index"
input, since it's more likely that users will want to connect to
that. Based on feedback from Simon Thommes.
Socket declarations exist all the time and it would be useful to use
them for tooltips at all times, not just when there is a computed log.
Differential Revision: https://developer.blender.org/D16846
Avoid calling `interpolate_to_evaluate` while evaluating normals,
which has to look up attributes by name for every curve. Also avoid
duplicating the curve type switch in a few functions. I didn't observe
a performance difference, but theoretically this could reduce
overhead for many small curves.
Due to precision issues, the cosine value calculated with
`dot_v3v3(start, end)` can be outside the -1, 1 range causing `acosf`
to return `nan(ind)`.
Use `angle_signed_on_axis_v3v3_v3` instead. It returns more accurate
values, deduplicates code, and avoids these `nan` issues.
Since 90ea1b7643, node trees have been reevaluated
after many selection operations because nodes are sorted based on
the selection status and an update tag was added for that. However,
for years the node order was allowed to be different between the
original and evaluated copy of node trees.
Though it is a bit sketchy to have that difference in the evaluated
node tree, reevaluations for just selection are very bad, so use a
"smaller" update tag and add a comment for justification.
Differential Revision: https://developer.blender.org/D17023
wi is the viewing direction, and wo is the illumination direction. Under this notation, BSDF sampling always samples from wi and outputs wo, which is consistent with most of the papers and mitsuba. This order is reversed compared with PBRT, although PBRT also traces from the camera.
The order of arguments to memcpy was reversed, which is sadly possible
because the constness `KeyBlock` of keyblock doesn't propagate to
pointers it contains.
Caused by 6769acbbba.
Some of the matrix variants are rather obscure from the
semantic: they don't really fully initialize the output:
as in, they only write to an upper-left 3x3 block.
A quick solution to fix the very commonly used constraint.
It feels that it is possible to minimize about of copy
operations.
The Grease Pencil Material Popover currently has a color picker
for the Stroke of a Material using Solid style, but not one for
a Fill using Solid style.
With the default Grease Pencil Materials, the current
popover only shows the Stroke color for the grey "Solid Fill"
material (which doesn't have its Stroke enabled) instead of
the more useful Fill color.
This patch shows a Stroke color picker when the Material
has Stroke enabled and the style is Solid.
This is the same for the Fill.
Reviewed By: antoniov, mendio
Differential Revision: https://developer.blender.org/D17004
Previously, the node would always evaluate the input field on the
entire geometry domain. This is good when most indices will be
accessed afterwards. However, it is quite a bad when only a single
index is used. Now the field is only evaluated for that one index.
Remove:
- IDPropertyTemplate.matrix_or_vector
Matrix & vector types have been deprecated, this wasn't used.
- IDProperty.saved
This was added preemptively but never used, replace with a pad so as
not to hint at a feature that doesn't exist.
The default curve type when there is no "curve_type" attribute is
Catmull ROM. In order to avoid allocating an entire array of values
just to set this default type, remove the attribute instead. This will
be less important when we can store attributes as single values.
Also fix a curve utility API comment.
Improve safety and correctness of matrix multiplication by using
temporary storage if one of the inputs is also the output.
No functional changes.
Differential Revision: https://developer.blender.org/D16876
Reviewed By: Campbell Barton, Sergey Sharybin
Since a year and a half ago we've been switching to a new way to
represent what sockets a node should have called "declarations"
that's easier to use, clearer, and more flexible for upcoming
features like dynamic socket counts or generic type sockets.
All builtin nodes with a static set of sockets have switched, but one
missing area has been group nodes and group input/output nodes. These
nodes have **dynamic** declarations which change based on their
properties or the group they're inside of. This patch addresses that,
in preparation for using the same dynamic declaration feature for
simulation nodes.
Generally there shouldn't be user-visible differences, but one benefit
is that user-created socket descriptions are now visible directly in
the node editor for group nodes and group input/output nodes.
The commit contains a few changes:
- Add a node type callback for building dynamic declarations with
different arguments
- Add an `Extend` socket declaration for the "virtual" sockets used
for connecting new links
- A similar `Custom` socket declaration is used for addon-defined socket
- Simplify the node update loop to use the declaration to build update
sockets
- Replace the "group update" functions with the declaration building
- Move the node group input/output link creation to link drag operator
- Make the field status part of group node declarations
(not for group input/output nodes though)
- Some fixes for declarations to make them update and build properly
Differential Revision: https://developer.blender.org/D16850
Under some circumstances (loading autosaves), we end up reading from
files that were saved with the new mesh format (after T95965). When
that happens we should skip the conversion from the old format to
avoid data-loss. This will also give forward compatibility when we
stop saving in the old format completely in 4.0.
Here I mostly just check if the attributes in the new format already
exist. Along with checking for the null status of `Mesh::mvert`, that
should cover the majority of cases.
Fixes T103878
Differential Revision: https://developer.blender.org/D17011
This fixes the UI alignment issues that were introduced by {D12815} with the addition of the boolean custom properties.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D17012
Previously transforming and translating meshes (used by the object info
and transform geometry nodes) was single threaded. Now use the same
code path as other geometry types which already includes multithreading.
I observed a 5x performance improvement for a 4 million vert mesh on a
Ryzen 7950x.
Trim erronously samples the next to last control point when it should
sample the last control point on the curve. This only happens when
reducing the curve to a single point. These changes should correct
the behavior.
Differential Revision: https://developer.blender.org/D17003
ViewCullingData::corners (vec4) was casted to a BoundingBox (vec3), so the frustum corners were uploaded in the wrong format to the GPU.
Now the ViewCullingData::corners are used directly without casting, since the BoundBox API is not really needed.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D17008
While keeping SSE2, SSE4.1 and AVX2. This does not affect hardware support, it
only slightly reduces performance for some older CPUs.
To reduce maintenance cost and improve compile times.
Differential Revision: https://developer.blender.org/D16978
Separating strokes using "selected points" didn't take into account
that points->time can be 0 and thus created points with negative
values in points->time, which should be an impossibility.
This patch fixes this in BKE_gpencil_stroke_delete_tagged_points.
Also, it makes the build modifier's new drawspeed immune
to (erroneous) negative time values, should they arise in other situations.
Reviewed By: antoniov
Differential Revision: https://developer.blender.org/D17006
Implementation didn't count the string terminator when allocating
memory to store `msl_patch_default`. The string terminator could
be overwritted by other memory adding some undefined behavior.
An alternative fix to [0] which caused an error with ASAN
(freeing an GHOST_ISystem instead of a GHOST_System).
Reported by @Baardaap in chat, I'm unable to reproduce the issue.
Instead of calling the destructor directly, add a private method that
deletes data before raising an exception.
[0]: fd36221930
Use a consistent style for declaring the names of struct members
in their declarations. Note that this convention was already used in
many places but not everywhere.
Remove spaces around the text (matching commented arguments) with
the advantage that the the spell checking utility skips these terms.
Making it possible to extract & validate these comments automatically.
Also use struct names for `bAnimChannelType` & `bConstraintTypeInfo`
which were using brief descriptions.
Meshes spawning particles from faces with with UV's/Vertex-colors but no
faces would crash de-referencing a NULL pointer.
Resolve by adding a check for this case and an assertion if CD_MFACE is
NULL when the mesh has polygons.
Ref D16947
These allow the usage of `atomicMin` and `atomicMax` function with float
values as there is no overload for these types in GLSL.
This also allows signed 0 preservation.
This wasn't really a problem since these are set on first bind or creation.
The test `if (enabled_srgb && srgb_) {` was depending on that variable that
in certain case, might not have been initialized (because of lazy init).
Changes to overlay_shader.cc workaround a bug in GCC-12.2
(likely a duplicate of [0]). As the workaround involved removing
a local variable which most functions already didn't assign,
remove it for all functions.
An alternative is to add (otherwise redundant) parenthesis, e.g.
`&(e_data.sh_data[sh_cfg])`, but this would need to be noted in
code-comments, so opt for removing the intermediate variable.
[0]: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=106247
As noted in comments, there are a lot of false positives which can't
be conveniently suppressed. Many of these warnings were caused by
`float x, y, z` being passed as `float[3]` using a pointer to `x`.
This makes `GVArrayImpl` and `VArrayImpl` more similar.
Only passing the pointer instead of the span also increases
efficiency a little bit. The downside is that a few asserts had
to be removed as well. However, in practice the same asserts
are in place at a higher level as well (in `VArrayCommon`).
In most cases it is currently not used, so always having it there
causes unnecessary overhead. In my test file that causes
a 2 % performance improvement.
Previously, `ParamsBuilder` lazily allocated an array for an
output when it was unused, but the called multi-function
wanted to access it. Now, whether the multi-function supports
an output to be unused is part of the signature. This way, the
allocation can happen earlier when the parameters are build.
The benefit is that this makes all methods of `MFParams`
thread-safe again, removing the need for a mutex.
`std::get` could not be used due to restrictions on macos.
However, the minimum requirement has been lifted in
{rB597aecc01644f0063fa4545dabadc5f73387e3d3}.
Currently you can retrieve a mutable array from a const CustomData.
That makes code unsafe since the compiler can't check for correctness
itself. Fix that by introducing a separate function to retrieve mutable
arrays from CustomData. The new functions have the `_for_write`
suffix that make the code's intention clearer.
Because it makes retrieving write access an explicit step, this change
also makes proper copy-on-write possible for attributes.
Notes:
- The previous "duplicate referenced layer" functions are redundant
with retrieving layers with write access
- The custom data functions that give a specific index only have
`for_write` to simplify the API
Differential Revision: https://developer.blender.org/D14140
Fixes bugs where UV islands with `mark seam` would tear at boundaries.
Modify seam_connected to search both it's edges instead of only one,
as this could fail if the edge was a seam or did not fan to the other loop.
Also fixes bug in `seam_connected_recursive`:
- `loop->prev == needle` changed to `loop == needle`
Maniphest Tasks: T103787
Reviewed By: Campbell Barton
Differential Revision: https://developer.blender.org/D16992
Test File: F14145477, F14137755, T79304
Avoid using components that can contain null pointer.
Getting attibute should avoid trying to do it for a null mesh.
This fix bypasses working with components.
Differential Revision: https://developer.blender.org/D16997
The crease custom data layer was added to a mutable version of the mesh,
but that wasn't used in the rest of the operation. Also the layer wasn't
retrieved properly with write access from the custom data API (fixed
separately as part of D14140). Also clean up a bit by retrieving
attributes from the mesh directly and by tweaking naming a bit.
Timecodes were generated from read packets, but applied to decoded
frames. This works as long as delay between packet read and decoded
frame is less than GOP size or if packet does not produce multiple
frames. In this case it did not work.
Use `pkt_pos`, `pkt_dts` and `pts` from `AVFrame` instead of `AVPacket`.
This way delay can be eliminated and timecode files are more reliable.
Effectively this disables two volume modifiers for the new curves
object and the point cloud object types. The aim is to simplify the
process of using these object types to prove out a node-group-based
workflow integrated with the asset browser. We're making the assumption
that these two modifiers were used very rarely on the new curves type
since that wasn't its purpose, so this breaks backwards compatibility.
Similar to the corresponding properties on node sockets, only adjust
the soft range. Because group nodes only have soft limits, groups
should generally be able to accept these inputs anyway. The benefit
of only using a soft range is that it allows choosing a more user-
friendly default range while keeping flexibility.
A proper boolean custom property type is commonly requested. This
commit simply adds a new `IDP_BOOLEAN` type that can be used for
boolean and boolean array custom properties. This can also be used
for exposing boolean node sockets in the geometry nodes modifier.
I've just extended the places existing IDProperty types are used, and
tested with the custom property edit operator and the python console.
Adding another IDProperty type is a straightforward extension of the
existing design.
Differential Revision: https://developer.blender.org/D12815
- `Interpolate Domain` -> `Evaluate on Domain`
- `Field at Index` -> `Evaluate at Index`
These names, discussed in recent geometry nodes submodule meetings,
describe actions rather than nouns, which is generally how nodes are
supposed to be named. The names are consistent, which is helpful
because they're similar conceptually. They also don't require knowledge
of the field concept, which we generally try to keep out of the UI in
favor of more beginner-friendly concepts.
We hope to add the ability to search for nodes with multiple
names for 3.5, so the old names can still have search items.
The menus are growing too large. This patches move some categories under
sub-menus, and shuffle some entries around.
We already had sub-categories split by separators. This change now
goes a step further and embrace 3-level menus.
Inspired by the "Simpler Add Menu" add-on by Quackers (waiting to hear
back to know Quackers real name).
Inspired by the "Simpler Add Menu" add-on by Alfonso Martinez II.
Differential Revision: https://developer.blender.org/D16993
Caused by {rBd397ecae325}.
Above commit added a new socket, so
`version_geometry_nodes_primitive_uv_maps` was getting the wrong sockect
with `->next`.
Now get the right one with yet another `->next` (might not be ideal, but
searching the right socket with other methods might be overhead?)
Maniphest Tasks: T103837
Differential Revision: https://developer.blender.org/D16994
When idle, each 3D view made two calls CTX_data_mode_enum(C) from the
WM_main loop. While not causing problems it complicated troubleshooting
high CPU use while idle in other areas.
Access the object via the view layer, giving approx 40x speedup.
Recently the event handling thread for Wayland sometimes used 100% of a
CPU core while idle.
Resolve by waiting for changes to the Wayland file-handle when
there are no events to read.
The previous fix from T100855 [0] no longer works on my system
(3.4.1 release also fails for GNOME/KDE/WLROOTS compositors).
Resolve by removing the loop from the wait-on-file handle check.
Also reduce locking/unlocking calls.
[0]: 37b256e26f
The new C++ OBJ importer was missing "split by objects" / "split by
groups" import settings of the older Python importer.
Implements T103839.
Added test coverage for all 4 possible combinations of these two
options.
This is caused by the partial derivatives not being precise enough to
take the tube shape into account. For now we just disable displacement
bump for this type of geometry to match cycles.
Fixes T101175 Eevee displacement behavior changed
In patch D16759 cleanup a else was removed by error which
deals with situations where current gpf was copied,
so that previous gpf may have MORE strokes than current gpf.
Reviewed By: antoniov
Differential Revision: https://developer.blender.org/D16986
Remove the unused function `pose_propagate_fcurve`
It was missed in D16771
Reviewed By: Jacques Lucke
Differential Revision: https://developer.blender.org/D16937
Ref: D16937
In case there is only 1 key on the FCurve,
the operator can run into a situation where it divides by 0.
It now skips the curve in that case
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D16982
Ref: D16982
For some reason the Armature modifier in the Multi-Modifier mode
interpreted the vertex group in a way essentially opposite to the
regular mode. Moreover, this depended not on the Multi-Modifier
checkbox, but on whether the mode was actually active.
This fixes the flip and adds versioning code to patch old files.
One difficulty is that whether the Multi-Modifier flag is valid
can be different between the viewport and render. The versioning
code assumes any modifier enabled in either to be active.
This change is not forward compatible, so min version is also bumped.
Differential Revision: https://developer.blender.org/D16787
User notifications in Blender were always annoying and therefore by default turned off.
- When tweaking compositor/material tree a notification was shown.
- When rendering an animation for each frame a notification was shown.
The reason for this was that it was automatically shown when a background job was
finished and Blender wasn't the top most application.
In stead of migrating user notification to UserNotification.framework it was decided
to remove it for now. If in the future notifications should be added back we should
start with a design to figure out where notifications makes sense.
Reviewed By: sergey, brecht
Maniphest Tasks: T103757
Differential Revision: https://developer.blender.org/D16955
Replace the pointers in the MeshEdge with indexes, removing MeshPrimitive and MeshVertex.
Code cleanup proposed by the geometry nodes to make the data structures more reusable by
other areas of Blender as well. Old implementation was to focused to the texture painting.
Initial the idea was to do the same with the data structures in UVIslands, but there some
concerns were raised that requires a different design than expected from a clean-up patch.
Concerns raised about converting UVIslands:
* Maps between UVPrimitive, UVEdge and UVVertex will be stored inside the UVIsland.
During UVIsland extraction detected islands can be merged. When they are merged all
Indexes should be updated.
* It is not possible to pre-allocate all buffers as they grow, what will lead to more re-allocations. The current
implementation uses a VectorList to ensure that re-allocations don't require the data to be
moved to the newly allocated memory. We could store some information about last used
sizes in runtime data to reduce the re-allocation overhead.
* Solution would require index based access inside a VectorList, which might increase the
complexity.
* UVIslands during 3d texturing is used as intermediate data, the final data is stored as PackedPixelRows.
We could proceed converting UVIslands as well, but that would lower the performance noticeably.
3D texturing has performance requirements, so when doing so we should make sure that
it matches that as well.
Reviewed By: HooglyBoogly
Maniphest Tasks: T101740
Differential Revision: https://developer.blender.org/D16752
Cycles converts internal links to converter nodes which don't do anything and
later on get collapsed by the graph optimization. However, the previous code
assumed that one Blender input socket maps to one Cycles input socket.
When a node is muted, there might be internal links from one input to multiple
outputs. In Cycles, this meant that one Blender input socket now mapped to
multiple input sockets on all the converter nodes, so only the last one survived.
THe fix is simple, just make the mapping a MultiMap.
The problem here is that whether an object is a shadow catcher or not affects the
visibility flags, but changes to the shadow catcher property did not trigger a
visibility flag update.
Added an extrude mode enum to the trim operators to
control extrusion: "project" and "fixed." "Fixed" just
extrudes along a fixed normal and is the new default.
New code from rBd05909a70c36 last week did not take into account
liboverride templates and `NOOP` operations. So we cannot assume that
there is no valid override property for these which need to be restored.
While we may get rid of templates at some point now, for now they are
still exposed in PY API, and have some basic unittests, so keep them
working as best as possible.
Issue reported on IRC by Martijn Versteegh (@Baardaap), thanks!
It is a part of the Phabricator to Gitea migration.
The issue template is based on the bug submission instructions which
are shown in the Phabricator's bug submission form. Some further tweaks
are likely needed, but the current version of the template simplifies
re-iteration while working on the migration.
The pull request template is needed to override the template in the
.github folder which is otherwise picked up by Gitea.
Tool settings can be accessed from both `tool_settings` &
`scene.tool_settings`.
As of [0] `scene.tool_settings` was used instead of `tool_settings`
causing the snap shortcut not to display.
Resolve by supporting variations of data-paths so both are detected.
[0]: 9a76dd2454
Logic to skip UV layers that are part of the MLoopUV treated all
loop-layers as UV's, causing duplicate and invalid names to be added
to be added to 'uv_sublayers_to_skip', this asserted in debug mode
when saving the `ellie_animation.blend` demo blend file.
Byte colors are generic attributes and are therefore included in
CD_MASK_PROP_ALL. Also clarify the use of vertex groups.
They always have to be propagated since they're displayed in
the spreadsheet, etc.
Move the `ME_SHARP` flag for mesh edges to a generic boolean
attribute. This will help allow changing mesh edges to just a pair
of integers, giving performance improvements. In the future it could
also give benefits for normal calculation, which could more easily
check if all or no edges are marked sharp, which is helpful considering
the plans in T93551.
The attribute is generally only allocated when it's necessary. When
leaving edit mode, it will only be created if an edge is marked sharp.
The data can be edited with geometry nodes just like a regular edge
domain boolean attribute.
The attribute is named `sharp_edge`, aiming to reflect the similar
`select_edge` naming and to allow a future `sharp_face` name in
a separate commit.
Ref T95966
Differential Revision: https://developer.blender.org/D16921
An apostrophe should not be used because it is not a mark of plural,
even for initialisms. This involves mostly comments, but a few UI
messages are affected as well.
Differential Revision: https://developer.blender.org/D16749
This property was intended to keep the snap elements synchronized with the scene.
But another solution exists.
And this property is not even working correctly.
This patch is a response to T101313.
Adds a selection to the Store Named Attribute node.
If the attribute does not exist unselected parts
are filled with zero values. Otherwise, only the
selected parts are filled.
Differential Revision: https://developer.blender.org/D16237
It was introduced in commit https://developer.blender.org/rB0fb12a9c2ebc
The problem was that the tool uses the same values for all modes,
but the new calculation must be only for Draw mode.
Now the mode is checked.
This is a mere "get this to compile in C++", didn't do changes like
using `MEM_cnew()` instead of `MEM_calloc()`.
Needed for the blender-project-basics branch, so I don't have to write C
wrappers for a single call from this file.
With the GPU API the sampler can not be set after texture binding, which caused
a delay of the actual change. Now do both in a single call for correctness and
performance.
Caused by NULL dereference in strip overlap handling (expand to fit),
because `time_dependent_strips` strip collection is not created.
Check if strip collection is provided in `query_right_side_strips()`.
Updates the add and search menu of the node editor to use the new "All"
asset library introduced in the previous commit. This simplifies code by
removing redundant logic to merge contents of multiple asset libraries.
Adds a new built-in asset library that contains all other asset
libraries visible in the asset library selector menu. This also means
all their asset catalogs will be displayed as a single merged tree. The
asset catalogs are not editable, since this would require support for
writing multiple catalog definition files, which isn't there yet.
Often it's not relevant where an asset comes from. Users just want to be
able to get an asset quickly, comparable to how people use a search
engine to browse images or the web itself, instead of first going to a
dedicated platform. They don't want to bother with first choosing where
they want the result to come from.
This especially is needed for the Asset Shelf (T102879) that is being
developed for the brush assets project (T101895). With this, users will
have access to all their brushes efficiently from the 3D view, without
much browsing.
Did an informal review of the asset system bits with Sybren.
This patch uses the recorded drawing speed to rebuild the strokes. This results in a way more
natural feel of the animation.
Here's a short summary of existing data used:
- gps->points->time: This is a timestamp in seconds of when the point was created
since the creation of the stroke. It's quite often 0 (I added a sanitization routine).
- gpf->inittime: This is a timestamp in seconds when a stroke was drawn measured
since some unknown point in time. I only ever use the difference between two strokes,
so the absolute value is not relevant.
Reviewed By: frogstomp, antoniov, mendio
Differential Revision: https://developer.blender.org/D16759
When adding a new layer from the viewport, the newly created layer
is set as active, which is visible in the properties panel,
but the selection in the dopesheet was not updated accordingly,
due to a missing notifier which is added in this patch.
A few weeks ago we enabled the Metal back-end for the viewport.
Due to metal, master is only able to build on MacOS 10.15 and above.
The previous minimum requirement is MacOS 10.13.
It was already planned to bump to a higher version for Blender 3.6. After
a short discussion via bf-committers it was decided that it is fine to bump it for
3.5 release.
This patch cleans up the CMake files and update the minimum requirement.
With this patch the next deprecations will be listsed.
- `NSOpenGLView`, `NSOpenGLContext` is deprecated. (replaced by metal)
- `NSStringPboardType` is replaced by `NSPasteboardTypeString`
- `NSTIFFPboardType` is replaced by `NSPasteboardTypeTIFF`
- `NSFilenamesPboardType` should be replaved by multiple pasteboard items with `NSPasteboardTypeFileURL` instead.
- `NSUserNotification` should be replaced with UserNotifications.frameworks API
Deprecations will be handled in separate tasks and commits. OpenGL won't be
fixed at this moment, as it will be phased out in the future. NSStringPboardType, NSTiffPboardType & NSFilenamesPboardType
will be provided in a single patch. NSUserNotification will also be provided in
its own patch.
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D16953
OpenGL is deprecated by Apple and triggers a warning when used. The goal
is that OpenGL is replaced by Metal backend, but we are not there yet.
To improve tracability of new warnings we hide deprecation warnings
when the GHOST_ContextCGL.h file is included.
NOTE: This change silences other deprecation warnings as well.
Set origin and convert operator now accepts point cloud and new curve
object. But these operators were not added in context menu.
Support for set origin and convert operator was added in
rBadb4dd911b91, rB933d56d9e98d and rB2752a88478a8
Reviewed by: HooglyBoogly
Differential Revision: https://developer.blender.org/D16939
The T103586 fix effectively ran the wl_surface_listener.leave callback
to as WLROOTS based compositors doesn't run them. Remove the workaround
since it's an error in WLROOTS to be fixed upstream.
Temporarily using the wrong window scale when disconnecting a monitor
on configurations that use different DPI per monitor is a minor enough
issue that I don't think it makes sense to workaround in GHOST.
Using run-time members in the surface modifier complicated code-review
and caused an unnecessary renaming in `dna_rename_defs.h`.
Also rename:
- `x` -> `vert_positions_prev`.
- `v` -> `vert_velocities`.
- `cfra` -> `cfra_prev`.
The mesh positions are now a span, but the convex hull didn't copy
the custom data layout to the new mesh since it assumed it didn't
need to. Moving UV maps to a generic attribute triggers this difference
in the test results.
It doesn't really make sense for the convex hull node to copy the
source mesh custom data layout at all anyway, but do it anyway
to avoid having to change the tests right now.
Currently the `MLoopUV` struct stores UV coordinates and flags related
to editing UV maps in the UV editor. This patch changes the coordinates
to use the generic 2D vector type, and moves the flags into three
separate boolean attributes. This follows the design in T95965, with
the ultimate intention of simplifying code and improving performance.
Importantly, the change allows exporters and renderers to use UVs
"touched" by geometry nodes, which only creates generic attributes.
It also allows geometry nodes to create "proper" UV maps from scratch,
though only with the Store Named Attribute node for now.
The new design considers any 2D vector attribute on the corner domain
to be a UV map. In the future, they might be distinguished from regular
2D vectors with attribute metadata, which may be helpful because they
are often interpolated differently.
Most of the code changes deal with passing around UV BMesh custom data
offsets and tracking the boolean "sublayers". The boolean layers are
use the following prefixes for attribute names: vert selection: `.vs.`,
edge selection: `.es.`, pinning: `.pn.`. Currently these are short to
avoid using up the maximum length of attribute names. To accommodate
for these 4 extra characters, the name length limit is enlarged to 68
bytes, while the maximum user settable name length is still 64 bytes.
Unfortunately Python/RNA API access to the UV flag data becomes slower.
Accessing the boolean layers directly is be better for performance in
general.
Like the other mesh SoA refactors, backward and forward compatibility
aren't affected, and won't be changed until 4.0. We pay for that by
making mesh reading and writing more expensive with conversions.
Resolves T85962
Differential Revision: https://developer.blender.org/D14365
Edit-mesh duplicator logic used a struct member vert_coords which read
as an alternative (and inconsistent) naming to vert_positions.
Rename to `vert_positions_deform` as the purpose of this value is to
assign when modifiers deform an edit-mesh.
Add `_deform` suffix to normals as well.
Use font's OS/2 table code page range bits to help differentiate
between Korean, Japanese, Simplified & Traditional Chinese fonts.
See D16484 for details.
Differential Revision: https://developer.blender.org/D16484
Reviewed by Brecht Van Lommel
Wayland requires the windows surface size is divisible by the surface
scale. This wasn't guaranteed when creating new temporary windows.
This meant opening the preferences could exit Blender with an error
with Hi-DPI configurations.
**Changes**
As described in T93602, this patch removes all use of the `MVert`
struct, replacing it with a generic named attribute with the name
`"position"`, consistent with other geometry types.
Variable names have been changed from `verts` to `positions`, to align
with the attribute name and the more generic design (positions are not
vertices, they are just an attribute stored on the point domain).
This change is made possible by previous commits that moved all other
data out of `MVert` to runtime data or other generic attributes. What
remains is mostly a simple type change. Though, the type still shows up
859 times, so the patch is quite large.
One compromise is that now `CD_MASK_BAREMESH` now contains
`CD_PROP_FLOAT3`. With the general move towards generic attributes
over custom data types, we are removing use of these type masks anyway.
**Benefits**
The most obvious benefit is reduced memory usage and the benefits
that brings in memory-bound situations. `float3` is only 3 bytes, in
comparison to `MVert` which was 4. When there are millions of vertices
this starts to matter more.
The other benefits come from using a more generic type. Instead of
writing algorithms specifically for `MVert`, code can just use arrays
of vectors. This will allow eliminating many temporary arrays or
wrappers used to extract positions.
Many possible improvements aren't implemented in this patch, though
I did switch simplify or remove the process of creating temporary
position arrays in a few places.
The design clarity that "positions are just another attribute" brings
allows removing explicit copying of vertices in some procedural
operations-- they are just processed like most other attributes.
**Performance**
This touches so many areas that it's hard to benchmark exhaustively,
but I observed some areas as examples.
* The mesh line node with 4 million count was 1.5x (8ms to 12ms) faster.
* The Spring splash screen went from ~4.3 to ~4.5 fps.
* The subdivision surface modifier/node was slightly faster
RNA access through Python may be slightly slower, since now we need
a name lookup instead of just a custom data type lookup for each index.
**Future Improvements**
* Remove uses of "vert_coords" functions:
* `BKE_mesh_vert_coords_alloc`
* `BKE_mesh_vert_coords_get`
* `BKE_mesh_vert_coords_apply{_with_mat4}`
* Remove more hidden copying of positions
* General simplification now possible in many areas
* Convert more code to C++ to use `float3` instead of `float[3]`
* Currently `reinterpret_cast` is used for those C-API functions
Differential Revision: https://developer.blender.org/D15982
Since internal links are only runtime data, we have the flexibility to
allocating every link individually. Instead we can store links directly
in the node runtime vector. This allows avoiding many small allocations
when copying and changing node trees.
In the future we could use a smaller type like a pair of sockets
instead of `bNodeLink` to save memory.
Differential Revision: https://developer.blender.org/D16960
activeSnap --> transform_snap_is_active
activeSnap_SnappingIndividual --> transform_snap_project_individual_is_active
activeSnap_SnappingAsGroup --> transform_snap_mixed_is_active
applySnappingIndividual --> transform_snap_project_individual_apply
applySnappingAsGroup --> transform_snap_mixed_apply
Also rearrange functions to be close to where they are used.
And use static when possible.
When rendering in the viewport (or probably on instanced objects, but I didn't
test that), emissive objects whose scale is negative give the wrong value on the
"backfacing" input when multiple sampling is enabled.
The underlying problem was a corner case in how normal transformation is handled,
which is generally a bit messy.
From what I can tell, the pattern appears to be:
- If you first transform vertices to world space and then compute the normal from
them (as triangle light samping, MNEE and light tree do), you need to flip
whenever the transform has negative scale regardless of whether the transform
has been applied
- If you compute the normal in object space and then transform it to world space
(as the regular shader_setup_from_ray path does), you only need to flip if the
transform was already applied and was negative
- If you get the normal from a local intersection result (as bevel and SSS do),
you only need to flip if the transform was already applied and was negative
- If you get the normal from vertex normals, you don't need to do anything since
the host-side code does the flip for you (arguably it'd be more consistent to
do this in the kernel as well, but meh, not worth the potential slowdown)
So, this patch fixes the logic in the triangle emission code.
Also, turns out that the MNEE code had the same problem and was also having
problems in the viewport on negative-scale objects, this is also fixed now.
Differential Revision: https://developer.blender.org/D16952
- Avoid calling node interface items "sockets"
- Use "active" instead of "current" to be more correct
- Avoid using the same word in description and name
- A couple grammar fixes
- Matrix normalize overloads needs to have the vector normalize redefined.
- double underscore (anywhere in symbol name) are reserved.
- Some operation yield different result due to float imprecision. Increasing
epsilon threshold for the failing tests.
Incorrect offset was calculated when strip was implicitly retimed (movie
FPS does not match scene FPS). This is because strip playback rate was
not used for offset calculation at all.
Since hold offset is specifying numbers of frames to skip, but at frame
rate of the source, this could result in gap when splitting the strip.
If that occurs, gap is compensated by moving handle to frame where strip
is split.
Happens, for example, when the object has animation, and disabled for
render, and animation render is performed.
The regression has been uncovered by f12f7800c2 which made it so
the dependency graph relies on runtime visibility tracking and
updates (without updating relations).
The optimization from a while ago in the ff60dd8b18 got in a way
of the visibilit updates because it removed relation between two
no-op nodes which belong to different IDs, which make the visibility
tracking impossible.
This change makes it so only relations which belong to the same
component are removed. This matches the expectations of the visibility
tracking (which, actually, also needed to happen at the moment of the
initial optimization commit). Technically, this change could introduce
some performance regression, but with the current design design of the
graph it is not really avoidable.
The idea to gain the best performance is to separate relations which
actually define the execution flow, and which are only needed to
define things like visibility dependencies.
When drawing using the option `Outline` the result stroke
was not using the Vertex Color option and always was converted
using material.
Now the vertex color option is used.
Crash only occured when textures was stored in a gray scale GPU
texture and was scaled down to fit inside the given limitation.
In this case the original number of pixels were packed into the
GPU buffer, not taken into account the scaled down image. This
resulted in a buffer overflow.
The bug is caused by rBb66b3f547c43e841a7d5da0ecb2c911628339f56.
From what I can see, that fix was intended to enable manual lens shift for
panorama cameras, but it appears that it also unintentionally applies
interocular shift.
This fix disables the multiview shift for panorama cameras, that way manual lens
shift still works but we get the 2.x behavior for stereoscopic renders back.
Differential Revision: https://developer.blender.org/D16950
The code that computes and inverts the shutter CDF had some issues that caused
the result to be asymmetric, this tweaks it to be more robust and produce
symmetric outputs for symmetric inputs.
At the first bounce, the diffuse/glossy/transmission weights are stored so that
contributions along the path can be split into the d/g/t indirect passes.
However, volume bounces always set the weight even at indirect bounces, so
even paths that had their first bounce on a purely glossy object would suddenly
start counting towards the diffuse indirect pass after a secondary volume bounce.
Do not clear all the font's glyph caches with single-step zoom
operators if the area does not change font size when doing so.
See D16785 for more details.
Differential Revision: https://developer.blender.org/D16785
Reviewed by Campbell Barton
During geometry nodes evaluation some sockets can be determined
to be unused, for example based on the condition input in a switch node.
Once a socket is determined to be unused, that information has to be
propagated backwards through the tree to free any memory that may
have been reserved for those sockets already. This is happening before
this commit already, but in a less ideal way.
Determining that sockets are unused early is good because it helps with
memory reuse and avoids copy-on-write copies caused by shared data.
Now, nodes that are scheduled because an output became unused have
priority over nodes scheduled for other reasons.
This allows auto-vectorization to happen when the a multi-function is
evaluated in "materialized" mode, i.e. it is processed in chunks where
all input and outputs values are stored in contiguous arrays.
It also unifies the handling input, mutable and output parameters a bit.
Now they all can use tempory buffers in the same way.
Staging texture update copied over the entire texture, rather than just the region of the texture which had been updated. Also added early-exit for cases where the net texture update extent was zero, as this was causing validation failures.
Authored by Apple: Michael Parkin-White
Ref T103658
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T103658, T96261
Differential Revision: https://developer.blender.org/D16924
First binding of a framebuffer lead to an incorrect SRGB conversion state being applied, as attachments, where presence of SRGB is determined, were processed after the SRGB check rather than before.
This DIFF also cleans up SRGB naming conventions and caching of fallback non-srgb texture view, for use when SRGB mode is disabled.
Authored by Apple: Michael Parkin-White
Ref T103399
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T103399, T96261
Differential Revision: https://developer.blender.org/D16907
This simplifies the code enough so that msvc is able to unroll and
vectorize some multi-functions like simple addition.
The performance improvements are almost as good as the GCC
improvements shown in D16942 (for add and multiply at least).
Required texture bytesize calculation for compacted data types was incorrectly calculated, resulting in an erroneous format conversion taking place instead of direct data upload.
Metal dummy buffer size also temporarily increased to address problematic cases where the bound buffer was too small for missing UBOs.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D16904
This was caused by rB0d73d5c1a2, which releases the scene mutex during kernel
loading. However, the reset mutex was still held, which can cause a deadlock
if another thread tries to reset the session, since it will acquire the
released scene mutex and then wait for the reset mutex.
Turns out there's no point in keeping the reset mutex locked after the delayed
reset section, so now we just release it earlier, which resolves the deadlock.
This mainly helps GCC catch up with Clang in terms of field evaluation
performance in some cases. In some cases this patch can speedup
field evaluation 2-3x (e.g. when there are many float math nodes).
See D16942 for a more detailed benchmark.
This moves all multi-function related code in the `functions` module
into a new `multi_function` namespace. This is similar to how there
is a `lazy_function` namespace.
The main benefit of this is that many types names that were prefixed
with `MF` (for "multi function") can be simplified.
There is also a common shorthand for the `multi_function` namespace: `mf`.
This is also similar to lazy-functions where the shortened namespace
is called `lf`.
* `depends_on_context` was not used for a long time already.
* `param_data_indices` is not used since rB42b88c008861b6.
* The remaining data is moved to a single `Vector` to avoid
having to do two allocations when the size signature becomes
larger than fits into the inline buffer.
This avoids a move of the signature after building it. Tthe value had
to be moved out of `MFSignatureBuilder` in the `build` method.
This also makes the naming a bit less confusing where sometimes
both the `MFSignature` and `MFSignatureBuilder` were referred
to as "signature".
* New `build_mf` namespace for the multi-function builders.
* The type name of the created multi-functions is now "private",
i.e. the caller has to use `auto`. This has the benefit that the
implementation can change more freely without affecting
the caller.
* `CustomMF` does not use `std::function` internally anymore.
This reduces some overhead during code generation and at
run-time.
* `CustomMF` now supports single-mutable parameters.
This refactors how devirtualization is done in general and how
multi-functions use it.
* The old `Devirtualizer` class has been removed in favor of a simpler
solution. It is also more general in the sense that it is not coupled
with `IndexMask` and `VArray`. Instead there is a function that has
inputs which control how different types are devirtualized. The
new implementation is currently less general with regard to the number
of parameters it supports. This can be changed in the future, but
does not seem necessary now and would make the code less obvious.
* Devirtualizers for different types are now defined in their respective
headers.
* The multi-function builder works with the `GVArray` stored in `MFParams`
directly now, instead of first converting it to a `VArray<T>`. This reduces
some constant overhead, which makes the multi-function slightly
faster. This is only noticable when very few elements are processed though.
No functional changes or performance regressions are expected.
This implement most of the functions provided by the BLI math library.
This is part of the effort to unify GLSL and C++ syntax. Ref T103026.
This also adds some infrastructure to make it possible to run GLSL shader unit
test.
Some code already present in other libs is being copied to the new libs.
This patch does not make use of the new libs outside of the tests.
Note that the test is still crashing when using metal.
This was limiting the use of the templates with other non internal types
like Ceres types, xithout defining thing like that:
`template<> inline constexpr bool is_math_float_type<mpq_class> = true;`
This breaks backwards compatibility some in that 3 sides will be mapped
differently now, but difficult to avoid and can be considered a bugfix.
Similar to rBdd8016f7081f.
Maniphest Tasks: T103615
Differential Revision: https://developer.blender.org/D16910
This patch implements the matrix types (i.e:float4x4) by making heavy
usage of templating. All matrix functions are now outside of the vector
classes (inside the blender::math namespace) and are not vector size
dependent for the most part.
###Motivations
The goal/motivations of this rewrite are the same as the Vector C++ API (D13791):
- Template everything for making it work with any types and avoid code duplication.
- Use functional style instead of Object Oriented function call to allow a simple compatibility layer with GLSL syntax (see T103026 for more details).
- Allow most convenient constructor syntax and accessors (array subscript `matrix[c][r]`, or component alias `matrix.y.z`).
- Make it cover all features the current C API supports for adoption.
- Keep compilation time and debug performance somehow acceptable.
###Consideration:
- The new `MatView` class can be generated by `my_float.view<NumCol, NumRow, StartCol, StartRow>()` (with the last 2 being optionnal). This one allows modifying parts of the source matrix in place. It isn't pretty and duplicates a lot of code, but it is needed mainly to replace `normalize_m4`. At least I think it is a good starting point that can refined further.
- An exhaustive list of missing `BLI_math_matrix.h` functions from the new API can be found here P3373.
- This adds new Rotation types in order to have a clean API. This will be extended when we port the full Rotation API. The types are made so that they don't allow implicit down-casting to their vector representation.
- Some functions make direct use of the Eigen library, bypassing the Eigen C API defined in `intern/eigen`. Its use is contained inside `math_matrix.cc`. There is conflicting opinion wether we should use it more so I contained its usage to almost the tasks as in the C API for now.
Reviewed By: sergey, JacquesLucke, HooglyBoogly, Severin, brecht
Differential Revision: https://developer.blender.org/D16625
Profiling shows that this computation consumes a noticeable amount
of time, so it is worth moving it to an earlier part of the code
that is executed less frequently and is multithreaded.
Differential Revision: https://developer.blender.org/D16933
Both cloth object collision and self collision use a BVH tree
representing the current cloth shape. The only difference between
them is the epsilon threshold value.
If these values are the same, it is possible to use the same tree
for both uses, thus easily reducing the overhead in the case when
both collision modes are used by the same cloth object.
Differential Revision: https://developer.blender.org/D16914
Caused by f1c0249f34, which filled the wrong value.
I have noticed several problems:
- Using a full array as single result.
- Checking single material index for 0. If we have a list of all slots,
then we must check this in the list.
- The result was filled false. Simple fix.
- Fixed problem with incorrect recording by mask indices, not polygons.
- Added domain specifics to names to avoid confusion.
Differential Revision: https://developer.blender.org/D16926
Previously you had to use a workaround with the Object info node to get
evaluated data from the new curves object to an original editable mesh.
This commit makes it so that a curves object can be converted directly
to a mesh object if it has evaluated curves or an evaluated mesh.
Differential Revision: https://developer.blender.org/D16930
Socket locations are set while drawing the node tree in the editor.
They can always be recalculated this way based on the node position and
other factors. Storing them in the socket is misleading. Plus, ideally
sockets would be quite small to store, this helps us move in that
direction.
Now the socket locations are stored as runtime data of the node editor,
making use of the new node topology cache's `index_in_tree` function
to make a SoA layout possible.
Differential Revision: https://developer.blender.org/D15874
Improve animation playback performance in EEVEE for materials using Mix
nodes. Socket availability was being set and reset on every evaluation
of Mix nodes, during animation playback, this was causing the graph to
be marked dirty, and the whole graph being re-evaluated on every frame,
causing performance issues during playback.
Additionally, do a bit of cleanup, traversing the node sockets with
the next link to improve clarity and reduce errors. Also refactoring
`nodeSetSocketAvailability` to early out and increase clarity on no-op.
Differential Revision: https://developer.blender.org/D16929
The reported backtrace in T102766 strongly points at some
concurrency issues within exisitng liboverride diffing code that
restores forbidden changes to reference linked data values.
This commit instead add tags to mark liboverrides/properties that need
to be restored, and do so in a separate new step of diffing, from the
main thread only.
This patch moves the realtime compositor out of experimental. See
T99210.
The first milestone is finished with regards to implementing most
essential nodes for single pass compositing. It is also now documented
in the manual and no major issues are known.
Differential Revision: https://developer.blender.org/D16891
Reviewed By: Clement Foucault
This patch allows the realtime compositor to be limited to a specific
compositing region that is a subset of the full render region. In the
context of the viewport compositor, when the viewport is in camera view
and has a completely opaque passepartout, the compositing region will be
limited to the visible camera region.
On the user-level, this gives the user the ability to make the result of
the compositor invariant of the aspect ratio, shift, and zoom of the
viewport, making the result in the viewport identical to the final
render compositor assuming size relative operations.
It should be noted that compositing region is the *visible* camera
region, that is, the result of the intersection of the camera region and
the render region. So the user should be careful not to shift or zoom
the view such that the camera border extends outside of the viewport to
have the aforementioned benefits. While we could implement logic to fill
the areas outside of the render region with zeros in some cases, there
are many other ambiguous cases where such a solution wouldn't work,
including the problematic case where the user zooms in very close,
making the camera region much bigger than that of the render region.
Differential Revision: https://developer.blender.org/D16899
Reviewed By: Clement Foucault
Previously when on frame 2.5 and trying to jump to a
keyframe that was on frame 2, it would instead jump past it.
Now it properly respects the subframes for that.
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D16651
Ref: D16651
The "While Held" option from the Pose Propagate Operator
doesn't do anything meaningful.
After talking with the Animation Module it was decided to remove it.
In code it was called `POSE_PROPAGATE_SMART_HOLDS`
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D16771
Ref: D16771
Ideally, we would also get variance information out of the test, but that
seems a bit more complex to implement. For now just run the test a couple
of times and average the timings.
The test now runs between 5 and 100 times, depending on how long it
to run the test once.
I noticed that sometimes the geometry nodes benchmark would not work
if there were some left-over debug prints in the code. The reason it did
not work was because the prints were mixed with the test output print.
I also tried using explicit flusing and `atexit` for printing the test output,
but that didn't solve it. Just printing additional newlines to better separate
the test output from other printed output helped though.
Using negative blend factors for blending in flipped poses was undesirable.
Instead, the pose blending operator now uses CTRL to flip the pose.
Negative blend values are still allowed, and cause the pose asset to be
subtracted from the current pose. It can quickly break the rig, but for
small adjustments it can be useful.
The slider component can now be told to not use CTRL for toggling stepped
10% increments. This is useful when the operator that uses the slider needs
that modifier key for its own purposes.
Initial error caused by 1efc94bb2f and fixed in 6a7917162c. However
the empty index files (empty as in, they contain the version number but
no assets) will have to be fixed somehow, since otherwise assets don't
show up at all for people who saved asset files in a broken version.
Delete empty index files if the modification timestamp indicates a time
when the bug was present (plus a day before and after, to address
possible time zone differences). This will basically make Blender skip
the optimization for .blend files without assets for one load, but even
then the index should still produce faster results than a completely
non-index read.
This can be removed after a while, it's just a (much needed) fix for
people who were using alpha/beta builds.
Differential Revision: https://developer.blender.org/D16678
Reviewed by: Jeroen Bakker
The use of `std::variant` allows combining the four vectors
into one which more closely matches the intend and avoids
a workaround used before.
Note that this uses `std::get_if` instead of `std::get` because
`std::get` is only available since macOS 10.14.
Issue comes from the fact that some of the image updates are handled
outside of depsgraph context (through the signal system), and therefore
completely ignored by the undo/redo code.
Now that undo/redo tries to update as little data as possible, it needs
to be aware of these changes.
As a temporary workaround, until image update is fully handled through depsgraph,
consider that IDs tagged with `ID_RECALC_SOURCE` should get their caches
cleared on undo/redo, and tag some RNA property updates of
Image/ColorSpace as such.
Reviewed By: sergey
Maniphest Tasks: T103242
Differential Revision: https://developer.blender.org/D16927
This workaround is no longer needed and prevents our OCIO configuration
from being loaded if Blender is unpacked under a Unicode path.
Differential Revision: https://developer.blender.org/D16818
Multiple improvements to UV Cylinder and UV Sphere projection including:
* New option "Pinch" or "Fan" to improve unwrap of faces at the poles.
* Support for "Polar ZY" option on "View On Equator" and "Align To Object"
* Better handling of inputs with round-off error.
* Improved handling of faces touching the unit square border.
* Improved handling of very wide quads spanning the right hand border.
* Improved accuracy near to (0, 0).
* Code cleanup and simplification.
Differential Revision: https://developer.blender.org/D16869
- Add parentheses to suppress an assertion on some compilers.
- It turns out cloth self-collision math is not precisely symmetric,
so sort the triangle index pair to restore behavior exactly identical
to the version before the new traversal.
Follow up to rB0796210c8df32
Previously cloth self-collision and other code that wants self-overlap
data was using an ordinary BVH overlap utility function. This works,
but is suboptimal because it fails to take advantage of the fact that
it is comparing two identical trees.
The standard traversal for self-collision essentially devolves into
enumerating all elements of the tree, and then matching them to the
tree starting at the root. However, the tree itself naturally partitions
the space, so overlapping elements are likely to be mostly placed nearby
in the tree structure as well.
Instead, self-overlap can be computed by recursively computing ordinary
overlap between siblings within each subtree. This only considers each
pair of leaves once, and provides significantly better locality.
It also avoids outputting every overlap pair twice in different order.
Differential Revision: https://developer.blender.org/D16915
To better estimate light contribution. Note that estimating the texture
from the IES file is still missing.
Contributed by Alaska.
Differential Revision: https://developer.blender.org/D16901
This patch adds two new panels in which users can control
offset (position, rotation, scale) by layer and by stroke number.
Use cases:
- if you want to create array of Suzannes and place them one behind
another, in 2d mode, Z depth will be wrong.
In 3d mode there will be Z fighting. With combination of stroke
and layer offset we can fight this issue without touching original drawing.
- even easier way to create 2.5d environments..
simply draw on layers and then displace them in one panel
instead fiddling with every layer individually
Possible improvements:
- add offset by material slot
- add step parameter, to allow displacing groups of N strokes.
{F13129598}
Reviewed By: mendio, antoniov
Differential Revision: https://developer.blender.org/D15106
Due an internal scale of the brush size done by grease pencil
draw tool (this scale factor cannot be removed), the size of the
radial control is not equal to the actual stroke thickness and
this makes the radial size displayed useless.
This patch adds a new property that allows to pass the
path of the tool path and this value is used to apply
the correct scale to the radial size.
Reviewed By: mendio, frogstomp, pepeland, brecht
Differential Revision: https://developer.blender.org/D16866
Use NodeTree.bl_label instead of "NodeTree" for more descriptive name.
Implemented by Iliya Katueshenock.
Differential Revision: https://developer.blender.org/D16856
Since rBcommit 74c4977a the pose library blending operator can extrapolate.
This is now also reflected in the hard min/max value of the blend factor
RNA property. The soft min/max are still -1/1 to indicate normal use.
While blending, press E to enable extrapolation / overshoot of the pose.
It will make it possible to blend in more than 100% of the pose asset.
This has the potential to completely break the rig, but it can be useful
to exaggerate poses when used with caution.
This was the case when an Annotation is also present as in the report.
Since {rB92d7f9ac56e0}, Dopesheet is aware of greaspencil/annotations
(displays its channels/keyframes, can rename their data, layers, fcurve
groupings etc.). However, the Graph Editor does not display these /
should not be aware of them.
Above commit already had issues that were addressed in the following
commits (mostly adding the new `ANIMFILTER_FCURVESONLY` to places that
dont handle greasepencil/annotations)
- {rBfdf34666f00f}
- {rB45f483681fef}
- {rBa26038ff3851}
Now in T103303 it was reported that doublicking a channel would not
select all fcurve`s keyframes anymore and this wasnt actually an issue
with that particular operator, but instead with another operator that is
also mapped to doubleclicking: the channel renaming (I assume the
keyconflict here is actually wanted behavior).
Channel renaming would not return `OPERATOR_PASS_THROUGH` here anymore
in the case nothing cannot be renamed, so we would not actually reach
the 2nd operator at all (the one selecting all keyframes).
Deeper reason for this is that the renaming operator would actually
"see" a channel that could be renamed (in the case of the report: an
annotation layer), but then cannot proceed, because the "real"
underlying data where the doubleclick happens is an fcurve...
So now exclude non-greasepencil channels in filtering as well where
appropriate by also adding `ANIMFILTER_FCURVESONLY` to the filter there.
Fixes T103303.
Maniphest Tasks: T103303
Differential Revision: https://developer.blender.org/D16871
Multiframe copy paste operations were prohibited by a block of code.
While this is understandable as it prevents confusing actions, there is a good use case to allow multiframe copy pasting.
This patch does:
- remove restricting block of code
- adds outer loops for frames both in copy and paste actions.
In copy action it will create an array of selected strokes from all selected frames
In paste action it will create new from previous copy action merged to a single frame. It will paste to all selected frames and create new frame if autokey is on and time cursor is not on any of the keyframes.
The main usecase is for creating motion smears as in examples attached. The user still need to do some actions in order to achieve desired look, such as stroke ordering and deleting excessive strokes.
{F14069747}
{F14069743}
Reviewed By: antoniov, mendio
Differential Revision: https://developer.blender.org/D16805
This issue was introduced in rB78f28b55d39288926634d0cc.
The fix is to use a `std::shared_ptr` to ensure that the `Global` will live
long enough until all `Local` objects are destructed.
This was quite a fight, some resulting notes:
* We cannot use anymore Boost packages because of a weird bug breaking
Blender debug builds and ivolving Boost, TBB and USD (see also
rB019b930d6b9c).
* OCIO, OIIO, OpenVDB and USD build options where updated to match these
from cmake libs building.
** Most notably, USD now has imaging, OIIO, OpenVDB and GL support.
Ref. T99618.
Previously, the lifetimes of anonymous attributes were determined by
reference counts which were non-deterministic when multiple threads
are used. Now the lifetimes of anonymous attributes are handled
more explicitly and deterministically. This is a prerequisite for any kind
of caching, because caching the output of nodes that do things
non-deterministically and have "invisible inputs" (reference counts)
doesn't really work.
For more details for how deterministic lifetimes are achieved, see D16858.
No functional changes are expected. Small performance changes are expected
as well (within few percent, anything larger regressions should be reported as
bugs).
Differential Revision: https://developer.blender.org/D16858
It is a part of old-standing TODO, and code which accesses
the value was commented out for many years.
Remove the field to help with an upcoming const-correctness
improvements.
To aid in debugging the case where your compiler is too old for Blender,
actually log which version CMake found.
Before, CMake would output:
```
CMake Error at CMakeLists.txt:121 (message):
The minimum supported version of GCC is 11.0.0
```
With the patch, it logs:
```
CMake Error at CMakeLists.txt:121 (message):
The minimum supported version of GCC is 11.0.0, found 10.4.0
```
This has been implemented for GCC and Clang. MSVC has been explicitly
excluded, as the version numbers used for this comparison are internal
versions and not directly usable/recognisable.
Reviewed By: LazyDodo, brecht
Differential Revision: https://developer.blender.org/D16849
Change the logic for propagating poses such that it checks keyframes
on all selected bones to determine the frame on which a pose
should be propagated to.
It then adds keyframes if they don't exist on whatever
frame the pose should be propagated to.
Reviewd by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D16654
Ref: D16654
Added a new operator that aligns selected keys on an exponential curve
Revied by Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D9479
Ref: D9479
Although viewport compositor isn't supported yet on Apple deviced the
shaderlibs are compiled. The compositor shaders uses mat3 constructor
with a single vec3 and 6 floats. This constructor wasn't defined in
metal so it failed the compilation.
This patch adds the override to mat3.
This patch adds a new "Kernel Optimization Level" dropdown menu to control Metal kernel specialisation. Currently this defaults to "full" optimisation, on the assumption that the changes proposed in D16371 will address usability concerns around app responsiveness and shader cache housekeeping.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D16514
For some reason I don't understand, the dragged link is sorted across
all the node's multi-input sockets. This leads to problems when there
are multiple sockets to sort. With this patch, I'm making the feature
work more directional.
Differential Revision: https://developer.blender.org/D16892
Reading or writing a vertex group is expensive enough that it's worth
parallelizing. On a Ryzen 3700x, in a grid of 250k vertices with
30 randomly assigned vertex groups (each to 10-50% of vertices),
I observed a 4x improvement for writing to a group and a 3x
improvement when reading their data. This significantly speeds
up nodes that create a new mesh from a mesh that had vertex groups.
Previously, this happened when the "node task" first runs, which might
not actually execute the node if there are missing inputs. Deferring the
allocation of storage and default inputs allows for better memory reuse
later (currently the memory is not reused).
Since 78f28b55d3, allocating on multiple threads is much
faster, making it a nice improvement to parallelize vertex group
operations. This patch adds multi-threading when removing a
vertex group from the "Remove Named Attribute" node.
On a Ryzen 3700x:
Before: `(Average: 15.6 ms, Min: 15.0 ms)`
After: `(Average: 8.1 ms, Min: 7.6 ms)`
Differential Revision: https://developer.blender.org/D16916
All kernel specialisation is now performed in the background regardless of kernel type, meaning that the first render will be visible a few seconds sooner. The only exception is during benchmark warm up, in which case we wait for all kernels to be cached. When stopping a render, we call a new `cancel()` method on the device which causes any outstanding compilation work to be cancelled, and we destroy the device in a detached thread so that any stale queued compilations can be safely purged without blocking the UI for longer than necessary.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D16371
If we change the radius of a point or spot lamp, we also change the area lamp size.
As shown in T102853, this is bad for animating the lamp type.
The solution is to make the property point to another member of the DNA
struct `Light`.
Differential Revision: https://developer.blender.org/D16669
The members `soft`, `bleedbias`, `bleedexp` and `contact_spread` were
deprecated in rBd8aaf25c23fa, and are no longer really used.
`soft` is only used by Collada as an extra value for exporting and
importing Blender files in collada.
`bleedexp` and `contact_spread` are only used in versioning to
initialize a default value.
Reviewed By: brecht, fclem
Differential Revision: https://developer.blender.org/D16834
Both, the guarded and lockfree allocator, are keeping track of current
and peak memory usage. Even the lockfree allocator used to use a
global atomic variable for the memory usage. When multiple threads
use the allocator at the same time, this variable is highly contended.
This can result in significant slowdowns as presented in D16862.
While specific cases could always be optimized by reducing the number
of allocations, having this synchronization point in functions used by
almost every part of Blender is not great.
The solution is use thread-local memory counters which are only added
together when the memory usage is actually requested. For more details
see in-code comments and D16862.
Differential Revision: https://developer.blender.org/D16862
This is now only an indirect dependency on shared libraries, which means
this combination is valid.
Also remove mechanism that automatically disabled WITH_BOOST if no libraries
are using it, this is no longer really helpful with shared boost libraries.
"show_expanded" did not dirty the keymap diff cache, leading to old flags
being written to the item when another item was edited.
Differential Revision: https://developer.blender.org/D13418
There are dependencies between shared libraries, and Python modules which are
always installed on Linux and macOS can use these also.
Instead of adding logic for dealing with dependencies and conditional Python
module installs, just always install everything when using precompiled
libraries. This does not affect compile time which would be the main reason to
turn off build options, and it does not affect the case where system libraries
are used.
More automatic and convenient to update existing configurations this way.
Also move into platform_old_libs_update.cmake where similar logic was put
already.
WLROOTS compositors don't run surface leave callbacks,
while this may be considered a bug in WLROOTS, neither GTK/SDL crash
so workaround the crash too.
This also fixes a minor glitch where the cursor scale wasn't updated
when changing monitor scale at run-time.
Use the same `".selection"` attribute for both curve and point domains,
instead of a different name for each. The attribute can now have
either boolean or float type. Some tools create boolean selections.
Other tools create float selections. Some tools "upgrade" the attribute
from boolean to float.
Edit mode tools that create selections from scratch can create boolean
selections, but edit mode should generally be able to handle both
selection types. Sculpt mode should be able to read boolean selections,
but can also and write float values between zero and one.
Theoretically we could just always use floats to store selections,
but the type-agnosticism doesn't cost too much complexity given the
existing APIs for dealing with it, and being able to use booleans is
clearer in edit mode, and may allow future optimizations like more
efficient ways to store boolean attributes.
The attribute API is usually used directly for accessing the selection
attribute. We rely on implicit type conversion and domain interpolation
to simplify the rest of the code.
Differential Revision: https://developer.blender.org/D16057
Finding the active view item button should only happen when it's actually
necessary, since looping through all buttons and blocks is an expensive
operation. This patch limits the search a bit more, to left clicks (the only
case that is actually handled).
This improves drawing performance in the node editor slightly,
where this was a bottleneck.
Differential Revision: https://developer.blender.org/D16882
This functionality is related only to debugging of SYCL implementation
via single-threaded CPU execution and is disabled by default.
Host device has been deprecated in SYCL 2020 spec and we removed it
in 305b92e05f.
Since this is still very useful for debugging, we're restoring a
similar functionality here through SYCL 2020 Host Task.
When pasting nodes with the shortcut or the context menu, place the
center of the selected nodes at the same position as the mouse cursor.
This should save time, and is more intuitive because the new nodes are
actually visible.
Based on a patch by Juanfran Matheu (@jfmatheu).
Differential Revision: https://developer.blender.org/D10787
The main change is returning a socket pointer instead of using two
return arguments. Also use the topology cache instead of linked lists,
references over pointers, and slightly adjust whitespace.
* Add missing constructor for squared matrix types.
* Use using instead of define for typenames.
* Add `==, !=, unary-` operators
* Catch all functional style constructors inside the regex
Always hide the area header contents when the slider UI component is used.
This prevents the slider from being drawn semi-transparently on top of
other UI elements.
Avoid saving the 'flipped' operator property of the "apply pose asset"
(`POSELIB_OT_apply_pose_asset`) operator. This caused problems: when
choosing "Apply Pose Flipped" in the asset browser, double-clicking a pose
would cause it to always be flipped.
Interactive blending of poses can now use negative factors (i.e. drag to
the left) to blend in the flipped pose.
This reverts rB6eb1c98b15bb7ea6cf184b08617f24c7afb91b6c where the F key
was used to flip the pose. That was already described as stop-gap
measure, and the new behaviour is more intuitive & direct.
Functionality over-the-shoulder reviewed by @hjalti.
Add a field `is_bidirectional` to sliders (`tSlider`). By defafult this
is `false`; when set to `true` the slider allows negative values.
The allowed ranges are now:
- No overshoot, no bidirectional: `[0, 1]`
- No overshoot, bidirectional: `[-1, 1]`
- Overshoot, no bidirectional: `[0, infinity)`
- Overshoot, bidirectional: `(-infinity, infinity)`
This will be used for the pose library blending operator, where sliding
to the right (postitive) blends as normal, and sliding to the left
(negative) flips the pose before blending.
This is part of D16858. Iterating over all field inputs allows us to extract
all anonymous attributes used by a field relatively easily which is necessary
for D16858.
This could potentially be used for better field tooltips for nested fields,
but that needs further investigation.
This is part of D16858 but is also useful for other purposes.
The changes to the node declaration in this commit allow us to figure
out which fields might be evaluated on which geometries statically (without
executing the node tree). This allows for deterministic anonymous attribute
handling, which will be committed separately. Furthermore, this is necessary
for usability features that help the user to avoid creating links that don't
make sense (e.g. because a field can't be evaluated on a certain geometry).
This also allows us to better separate fields which depend or don't depend
on anonymous attributes.
The main idea is that each node defines some relations between its sockets.
There are four relations:
* Propagate relation: Indicates that attributes on a geometry input can be
propagated to a geometry output.
* Reference relation: Indicates that an output field references an inputs field.
So if the input field depends on an anonymous attribute, the output field
does as well.
* Eval relation: Indicates that an input field is evaluated on an input geometry.
* Available relation: Indicates that an output field has anonymous attributes
that are available on an output geometry.
These relations can also be computed for node groups automatically, but that
is not part of this commit.
This was the case when done via the py-API.
Now also set active_color_attribute / default_color_attribute on newly
created attributes (in case none exist yet).
Maniphest Tasks: T103564
Differential Revision: https://developer.blender.org/D16898
Python API for moving strips to and from meta strips did not invalidate
strip lookup cache. Because of that, `SEQ_get_seqbase_by_seq()` failed
to lookup origin of strip, which resulted in crash on NULL dereference.
Invalidateion was added to functions `SEQ_edit_move_strip_to_meta()` and
`SEQ_add_meta_strip()`.
Partly a cleanup, but also iterating over spans can be faster than
linked lists. Also rewrite the multi-input socket link counting
to avoid the need for a temporary map. Overall, on my setup the changes
save about 5% (3ms) when drawing a large node tree (the mouse house file).
Small memory allocations are a bottleneck when drawing large node trees.
Avoid them by passing the socket index in the whole tree and getting the
tree from the context rather than allocating structs for the tree, node,
and socket. The performance improvement will be a few percent at most.
This was an oversight in rBdba2d828462ae22de5.
The evaluator uses multiple threads to initialize node states
but it is still in single threaded mode.
`get_main_or_local_allocator` did not return the right allocator
in this case.
During pose blending, when flipping the pose with {key F}, the pose
backup needs to be recreated. Without this, the blending wouldn't be
done properly.
F-for-flipping was introduced in rB6eb1c98b15bb7ea6cf184b08617f24
While blending poses from the pose library, press {key F} to flip the
pose.
Since rBc164c5d86655 removed the "Flip Pose" checkbox, there was no more
way to blend poses flipped.
Note that this is a bit of a stop-gap measure. The goal is to have a
bidirectional blend slider, where dragging to the left flips the pose,
and dragging to the right blends it normally.
As an optimization, dependency graph evaluation skips through
no-op nodes at the scheduling stage. However, that leaves update
flags enabled on the node, and the most problematic one is the
USER_MODIFIED flag, which get flushed to children every time
the no-op node is tagged.
This in turn can cause simulation caches downstream to be
permanently stuck in an outdated state until the depsgraph
is rebuilt and the stuck flag cleared out.
Differential Revision: https://developer.blender.org/D16868
The BONE_SEGMENTS operation node is only created if the bone is
actually a B-Bone. One location in the code wasn't checking that
before trying to create a relation.
Move some functions for transforming a span of vectors to a header
and call them from these functions, just like was done for curves
objects recently.
Resolves T102027, T102026
Differential Revision: https://developer.blender.org/D16883
Expose `BKE_pose_apply_action_blend` and a simplified pose backup system
to RNA. This will make it possible to easily create some interactive
tools in Python for pose blending.
When creating a backup via this API, it is stored on the
`Object::runtime` struct. Any backup that was there before is freed
first. This way the Python code doesn't need access to the actual
`PoseBackup *`, simplifying memory management.
The limitation of having only a single backup shouldn't be too
problematic, as it is meant for things like interactive manipulation of
the current pose. Typical use looks like:
- Interactive operator starts, and creates a backup of the current pose.
- While the operator is running:
- The pose backup is restored, so that the next steps always use the
same reference pose.
- Depending on user input, determine a blend factor.
- Blend some pose from the pose library into the current pose.
- On confirmation, leave the pose as-is.
- On cancellation, restore the backup.
- Free the backup.
`BKE_pose_apply_action_blend` is exposed to RNA to make the above
possible.
An alternative approach would be to rely on the operator redo system.
However, since for poses this would use the global undo, it can get
prohibitively slow. This change is to make it easier to prototype
things; further into the future the undo system for poses should be
improved, but that's an entire project on its own.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D16900
While the cost of creating AttributeAccessor and finding the "material_index"
attribute is not large, there's really no need to do that for each
polygon. Move the access outside of the per-polygon loop.
Move `pose_backup.cc` from `editors/armature` to `blenkernel`. This is
in preparation of an upcoming change where the pose backup is going to be
owned by the `Object`. This will need to be automatically cleared when the
object is freed, which means that `blenkernel` needs the corresponding
logic.
Technically only the freeing code could be moved, but I felt it made more
sense to keep the related code together.
No functional changes.
The "osl_texture" intrinsic was not implemented correctly. It should handle alpha
separately from color, the number of channels input parameter only counts color
channels.
There are two underlying issues which got uncovered by the report:
First, is that the poll() function for the operator was using legacy
API which is on its way of removal in the next major version release.
This part is fixed in this patch based on a patch provided by Philipp
Oeser (P3389) with the modification that the `clip` is not accessed
prior to None check. Ended up in a bit annoying one-liner, the entire
function could be refactored to use early returns.
The second issue is that the Python access to the legacy property
was wrong: need to access camera reconstruction instead of accessing
deprecated DNA field.
Some files out there (e.g. in T103441) contain face definitions with
four indices, which the importer code was not expecting. The OBJ
standard spells out up to three indices per face corner; the file in
there must be using some sort of non-standard OBJ syntax extension.
Now the code simply ignores any trailing per-face-corner data.
Similar to T98782 that was about normal indices: some files out there
are technically "wrong" since they refer to UV indices, without ever
defining any UVs. If the file does not have any UVs, simply ignore UV
indices in the OBJ face definitions. Fixes T103212.
It's confusing for users when the Dopesheet's Editor Buttons for Grease Pencil are greyed out.
{F14099985}
[[ https://blenderartists.org/t/cant-create-new-layers-in-grease-pencil-dopesheet/1353882 | Can’t create new layers in grease pencil dopesheet ]]
This is often because the 'Only Show Selected' filter is disabled. This 'requirement' does not seem to be necessary since the Dopesheet is already in Grease Pencil mode and there is an active Grease Pencil Object. It is also not apparent as to why so many Operators depend on it and unintuitive that it controls their function. The 'Only Show Selected' filter button is far away from the Operator buttons in the User Interface Header, so it's difficult to make the association.
If the 'Only Show Selected' IS absolutely required, I believe it should be closer to the DOPESHEET_HT_editor_buttons. Otherwise, I think the requirement should be removed.
Reviewed By: antoniov
Differential Revision: https://developer.blender.org/D16885
Based on suggestion from Ray molenkamp (@LazyDodo), thanks.
Also fix patching of OSL code, would not work properly when using repo
checkout instead of archive download.
Re. T99618.
- Move from blenkernel to the node editor, the only place it was used
- Use two vectors instead of ListBase
- Remove define for validating the clipboard, which shouldn't be skipped
- Comment formatting, other small cleanups to whitespace
Differential Revision: https://developer.blender.org/D16880
The geometry nodes evaluator supports "lazy threading", i.e. it starts out
single-threaded. But when it determines that multi-threading can be
benefitial, it switches to multi-threaded mode.
Now it only creates an enumerable-thread-specific if it is actually using
multiple threads. This results in a 6% speedup in my test file with many
node groups and math nodes.
When these declarations are built without the help of the special
builder class, it's much more convenient to set them directly rather
than with a constructor, etc. In most other situations the declarations
should be const anyway, so theoretically this doesn't affect safety too
much. Most construction of declarations should still use the builder.
Whenever a node group is entered during evaluation, a new compute
context is entered which has a corresponding hash. When node groups
are entered and exited a lot, this can have some overhead. In my test
file with ~100.000 node group invocations, this patch improves performance
by about 7%.
The speedup is achieved in two ways:
* Avoid computing the same hash twice by caching it.
* Invoke the hashing algorithm (md5 currently) only once instead of twice.
Geometry nodes used to log all socket values during evaluation.
This allowed the user to hover over any socket (that was evaluated)
to see its last value. The problem is that in large (nested) node trees,
the number of sockets becomes huge, causing a lot of performance
and memory overhead (in extreme cases, more than 70% of the
total execution time).
This patch changes it so, that only socket values are logged that the
user is likely to investigate. The simple heuristic is that socket values
of the currently visible node tree are logged.
The downside is that when the user changes the visible node tree, it
won't have any logged values until it is reevaluated. I updated the
tooltip message for that case to be a bit more precise.
If user feedback suggests that this new behavior is too annoying, we
can always add a UI option to log all socket values again. That shouldn't
be done without an actual need though because it takes up UI space.
Differential Revision: https://developer.blender.org/D16884
Read the selection attribute on the proper domain using implicit
interpolation rather than just using its oiginal domain that might
not match the domain of the color attribute.
Lazy-function graphs are now evaluated properly even if they contain
cycles. Note that cycles are only ok if there is no data dependency cycle.
For example, a node might output something that is fed back into itself.
As long as the output can be computed without the input that it feeds into,
everything is ok.
The code that builds the graph is responsible for making sure that there
are no actual data dependencies.
This patch adds rename popup when using Y key to switch
active layer and choosing New layer in Draw mode.
It follows https://developer.blender.org/D15092, which introduced this
for moving selected strokes to layers in Edit mode.
Reviewed By: antoniov
Differential Revision: https://developer.blender.org/D16877
OIIO: 2.4.6.0
OpenVDB: 10.0.0
OSD: 3.5.0
OCIO: 2.2.0
NOTE: Had to fight OpenVDB to force it to use 'deprecated' TBB 2020, it
really wants to use oneTBB when it can find it.
Re. T99618.
Use socket indices to keep track of logged values instead of their
identifiers. This decreases memory pressure when there are many
sockets. In cases with many cheap nodes, this can give a relatively
large improvement to overall performance. We observed a 15% increase
in a case with many math nodes and a larger increase in an experimental
softbody node setup. The log is invalidated when we add/remove/move
sockets anyway.
This is the best way I found to make building socket declarations without
the builder helper class work. Besides a vague hope for non-leaky
abstractions, I don't think there's any reason for these fields not to be
accessible directly.
Ref D16850
Fix warning generated due to the full-stop in the description message of
the property `use_auto_mask`
Property added in: rBa9cb66b856e80d0542a9ad3fec0b0fb47d28f805
Remove the option to display the real size of the cursor
and set as default. Now the cursor is displayed or not using
show_cursor option, but if it's displayed always use the real size.
This patch makes sure that each of the expand keymap entries will use consistent "invert" and "use_mask_preserve" properties.
Based on previous discussions we decided to flip the default Mask Expand behavior.
This has multiple benefited:
- The mask creation is more consistent with other masking tools (Always add to existing mask. Mask selected areas)
- It's easier to use expanding for masking face sets (Snapping with `Ctrl`) or building a mask from repeated operations
- It's less likely to mask certain areas unintentionally (Loose mesh islands)
- If the current behavior is desired for an expand operation the user can use `E` & `F` in the modal keymap (Which is less often the case).
If we want to revisit the original design of inverted masking again in the future we should do this via {T97903}.
Reviewed By: Joseph Eagar
Differential Revision https://developer.blender.org/D16434
Ref D16434
Scale texture coordiantes for square brushes by sqrt2,
proportionally to how square they are (how close
tip_roundness is to zero).
Note: this is done in `calc_brush_local_mat()`, the
result of which appears to be used exclusively for
texture mapping.
Don't allow calling Attribute Convert operator in edit mode.
Right now BMesh does not support attribute operations.
Differential Revision: https://developer.blender.org/D16864
The node doesn't support blurring boolean attributes, so avoid
compiling an implementation for boolean data.
Differential Revision: https://developer.blender.org/D16867
When converting from imesh to mesh for the final result, custom
data should be copied from ALL operands including the main mesh.
Differential Revision: https://developer.blender.org/D16854
I missed adding the "convert type/domain to mask" macros.
Also refactor slightly to split the matching attribute test to a
separate function to ease debugging and reduce duplication.
The effect of CANCELLED on the undo stack is quite obscure, and
mistakenly using it after doing some changes causes confusing
behavior. It's better to describe it explicitly in the docs.
This commit addresses that specific case related to Collection ID type,
using a band-aid fix which is hopefully safe enough.
T103062 will remain open as a TODO task for a proper fix later.
This is an obvious editing mistake introduced in 05952aa94d,
resulting in incorrect vertex coordinates used when raycasting
for internal springs with a rest shape key.
In rBfcddb7cda766 I forgot to update part of the whole diffing chain,
effectively breaking the report flags propagation from any sub-structs
of RNA IDs structs.
Remove the redundant option to disable selection in order to simplify
the tools and UI, both conceptually and internally.
It was possible to disable curves selection completely by clicking on
the active selection domain. However, that was redundant compared to
just selecting everything by pressing "A". The remaining potential use
could have been saving a selection for later, but that can be done with
more complete attribute editing tools in the future.
The color of the brush cursor is changed depending
of the mode selected.
If the mode is stroke vertex color, use vertex color, otherwise
it uses material stroke color.
On gcc 11.3, Ubuntu 22.04 the default constructor for
ColorSceneLinear4f did not zero the r,g,b,a member variables. Replacing
the empty constructor with a default constructor circumvents this
problem (compiler bug? ) even though it *should* be more or less
equivalent.
This panel showed a duplication of options that were in the main light panel and only mistakenly shows up in the workbench engine where lights should have no options.
This panel was also used by the POV-Ray add-on but that was removed recently.
This panel showed a duplication of options that were in the main light panel and only mistakenly shows up in the workbench engine where lights should have no options.
This panel was also used by the POV-Ray add-on but that was removed recently.
When drawing strokes in Grease Pencil, it was always a bit hard
to predict how thick the strokes would be, because there was
no visual reference of the thickness in the cursor.
This patch adds that visual reference. It shows the brush size
as a circle in the draw cursor.
Showing the brush size can be toggled in the Cursor menu
of the Grease Pencil draw tool.
Request in RCS with 26 upvotes for this option:
https://blender.community/c/rightclickselect/0zfbbc
On the technical side: the brush size is calculated
in 3D space and takes zoom level into account, as well as
object/layer transfrom, layer thickness change (gpl->line_change)
and thickness scale (gpd->pixfactor).
Reviewed By: mendio, antoniov
Differential Revision: https://developer.blender.org/D16851
Add required additional_info to shader using gpu_shader_point_uniform_color_aa_frag.glsl. This is the only other reference to the shader which requires the additional_info to be added.
{F14085803}
Reviewed By: #eevee_viewport, fclem
Maniphest Tasks: T103426
Differential Revision: https://developer.blender.org/D16853
This replaces the old Edit menu, creating a menu only for catalog
operators. The Undo/Redo were already working only for catalogs, so now
this is more clear.
The menu also contains the Save and New catalog operators.
Differential Revision: https://developer.blender.org/D16820
Caused by rB6514bb05ea5a.
For the remeshing, we have to make sure these names are brought over
each time a mesh is made from another in the process.
This happens when reprojecting the colors in
`BKE_remesh_reproject_vertex_paint` and also again in
`BKE_mesh_nomain_to_mesh`. A bit unsure if this should happen as deep as
in `BKE_mesh_nomain_to_mesh` (if not, this can be isolated to
`voxel_remesh_exec`), but I would assume other callers of
`BKE_mesh_nomain_to_mesh` would actually benefit from it, too?
Maniphest Tasks: T103394
Differential Revision: https://developer.blender.org/D16847
Caused by 7d7e90ca68.
When accessing context members from the windowmanager context
(`C->wm.store` which is mainly used for UI related stuff) the above
commit broke behavior in `CTX_store_ptr_lookup` in that it changed and
would **always** return NULL if no type is passed in. The call to
`CTX_store_ptr_lookup` from `ctx_data_get` **always** passes in NULL
though.
Accessing other context members survived since they take a different
code path in `ctx_data_get` and dont use `CTX_store_ptr_lookup`.
Now also return the entry if a NULL type was passed as it was before.
Fixes T103370, T103405, T103417
Differential Revision: https://developer.blender.org/D16840
Until now the owner spaces in the object constraint properties used the
same descriptions as the target spaces, unlike bone constraints.
For instance, if you chose World Space as owner space, you'd get the
description: "The transformation of the target is evaluated relative to
the world coordinate system".
Reuse the existing descriptions from the bone constraints instead, so
now you get: "The constraint is applied relative to the world coordinate
system".
Reviewed By: sybren
Maniphest Tasks: T43295
Differential Revision: https://developer.blender.org/D16747
Convert 3D point shader fragment color from sRGB space to framebuffer space to match 3D line shader.
Reviewed By: fclem
Maniphest Tasks: T97394
Differential Revision: https://developer.blender.org/D16831
Make the "Clear Motion Paths" operators more intuitive. Previously, the
only way to clear the motion path of the selected object/bone would be
to shift-click the "Clear ALL Motion Paths" button. Now there are two
"X" buttons, one for "selected" and one for "all".
The "Clear Selected" and "Clear All" buttons align with the
corresponding "Update Selected" and "Update All" buttons.
When building without WITH_WINDOWS_BUNDLE_CRT the manifest
did not contain the blender.shared dependentAssembly leading
to missing dll errors at blender startup.
(MacOS) only: In the System tab of the user preferences the user has the
ability to select a GPU backend that Blender will use. After changing
the GPU backend setting, the user has to restart Blender before the
setting is used.
It was added to start collecting feedback on the Metal backend without
using the command lines.
By default Blender will select OpenGL as backend. When Metal is selected
(via `--gpu-backend metal` or via user preferences) OpenGL will be used as
fallback when the platform isn't capable of running Metal.
Separate the "insert nodes into group" operation into more distinct
phases. This helps to clarify what is actually happening, to avoid
redundant updates to group nodes every time a new socket is discovered,
and to make use of the topology cache to avoid the "accidentally
quadratic" alrogithms that we have slowly been removing from node
editing.
The change is motivated by the desire to use dynamic node declarations
for group nodes and group input/output nodes, where it is helpful to
avoid updating the declaration and sockets multiple times.
Use the map created for copying nodes more instead of iterating over all
nodes unnecessarily a few times. Use the map empty check instead of
a separate boolean variable. Use a utility function to retrieve a
separate buffer of selected nodes in case the nodes by id Vector
is reallocated (that part is technically a fix).
This enable building the metal backend by default on Apple hardware.
This is needed for further testing and the new backend selector D16774.
Ref T96261
Global scope arrays can incur suboptimal per-shader-thread memory allocations, resulting in excessive usage of limited local memory resources. These changes ensure that any arrays are limited to the closest scope in which they are required and thus will get correctly optimized by the compiler.
A number of constants have also been replaced with Macro's as these can result in better runtime performance for complex shader code.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D16825
Propagate `eRNAOverrideMatchResult` 'return' flags at higher level into
BKE API, instead of just returning a boolean true when new override
rules have been created.
NOTE: This is an intermediary step towards fixing T102766.
Differential Revision: https://developer.blender.org/D16761
This was harmless because the function would just return null in release
builds, which was checked. Theoretically this vertex group mapping
shouldn't depend on the object type, but the vertex group API would
have to move away from the object-level first.
These are meant to be regression tests, not fuzz tests. The "random"
shuffling made debugging quite annoying, even though the random order
was the same every time. Instead, hard-code the two lists to make
things more obvious. The resulting list doesn't make much sense
(for example, the multires modifier has to be first in the stack),
but for now avoid changing things further.
Also remove some comments that weren't helpful.
Previously, the same `FieldInferencingInterface` was build for every node
multiple times. Now only once during the inferencing. Going forward,
it would be even better to store the inferencing interface as part of the
node declaration to avoid building it during inferencing at all.
A number of paths resulted in compilation errors after porting EEVEE to use Create-Info. Namely the fallback path for cubemap support. A number of other strict compilation failures regarding format comparison also required fixing when this mode is enabled.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261, T103313
Differential Revision: https://developer.blender.org/D16819
Add documentation for `BKE_id_defgroup_list_get()` and document that
`CD_MDEFORMVERT` mesh layers contain `MDeformVert` structs.
No functional changes.
The Metal backend already supports output for the 6 clipping planes via gl_ClipDistances equivalent, however, functionality to toggle clipping plane enablement was missing.
Authored by Apple: Michael Parkin-White
Ref T96261
Depends on D16777
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D16813
Line Loop topology support for cutting tool and add support for packing several vertex attributes across individual pixels within a texture buffer.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D16783
- Support for non-contiguous shader resource bindings for all cases required by create-info
- Implement missing geometry shader alternative path for edit curve handle.
- Add support for non-float dummy textures to address all cases where default bindings may be required.
Authored by Apple: Michael Parkin-White
Ref T96261
Depends on D16721
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D16777
The Realtime Compositor crashes on undo after an operation like Dissolve
node.
The compositor evaluator stored a reference to the compositor node tree
assuming that it will always be valid. This is not guaranteed, however,
and changes to the node tree can invalidate that reference. So we get
the node tree from the context directly every time to fix the crash.
Such IDs are tagged with the new `LIB_TAG_RUNTIME`. They are essentially
like any other regular ID, except that they do not get written in .blend
files. They also do not make their linked data usages directly linked.
They do be written in undo steps however.
This tag should be ignored in any non-Main IDs (e.g. evaluated data,
`NO_MAIN`, etc.).
This commit also adds a new RNA ID property, `is_runtime`. This is not a
direct mapping to the DNA tag, as a non-main ID will also return True,
and the property is only editable for Main IDs.
Some basic testing for expected behavior of that new tag was also added
to `blendfile_io` py unittest.
Required for brush asset project, see T101908.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D16675
ID tags were fully cleared on file write, however some should be written
so that they are preserved accross undo steps.
Currently this likely did not cause any serious issue, as the missing
ones were not that critical.
When creating a new mesh to change it in some way, the active and
default color attribute names should be copied to the new mesh.
Doing that in the generic "copy parameters for eval" function should
cover the vast majority of cases.
Accessing a mesh with write access can be costly if it is used
elsewhere at the same time because of copy-on-write. When always did
that at the end of the modifier calculation, but it's trivial to only
do that when we might need actually use the mesh to add original
index layers.
Caused by b08301c865. This also contains an optimization
compared to the previous version to avoid recalculating normals when
the entire mesh has moved by the same offset.
Reported by Demeter in chat.
This reverts commit a3a9459050.
And fixes T103337.
a3a9459050 has some flaws and it needs to go through review (See D16803).
Conflicts:
intern/ghost/intern/GHOST_SystemWin32.cpp
This was due to a missing endpoint case that wasn't handled in the port.
The last point still have to be discarded manually because of the
dot/stroke setting of the material.
The first test `ma1.x == -1` is not necessary anymore since the index
buffer do not contain this point (which was rendered using instance
rendering before.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D16812
Unlike other (closed) hierarchies, view layers dont show their contents
next to their names.
Code would still find the item via outliner_find_item_at_x_in_row though,
this is now prevented (same as if the viewlayer was open [instead of
collapsed]).
Fixes T102357.
Maniphest Tasks: T102357
Differential Revision: https://developer.blender.org/D16662
This patch implements the Streaks Glare node. Which is an approximation
to the existing implementation in the CPU compositor. The difference due
to the approximation is bearily visible in artificial test cases, but is
less visible in actual use cases. Since the difference is rather similar
to that we discussed in the Simple Star mode, the decision to allow that
difference would probably hold here.
For the future, we can look into approximating this further using a
closed form IIR recursive filter with parallel interconnection and
block-based parallelism. That's because the streak filter is already
very similar to the causal pass of a fourth order recursive filter,
just with exponential steps.
Differential Revision: https://developer.blender.org/D16789
Reviewed By: Clement Foucault
This patch implements the variable size mode of the blur node. This is
not identical to the CPU implementation, but is visually very close.
That's because of two things. First, the Extend Bounds option introduces
a 2px offset that doesn't make sense, which is likely a bug in the CPU
implementation. Second, the CPU implementation approximate the result
using three passes, the first two of which are separable morphological
operators applied on the size input. But this approximation does not
provide an advantage because the last pass is non-separable anyways. So
the GPU implementation does not attempt this approximation for more
accurate and faster results.
Differential Revision: https://developer.blender.org/D16762
Reviews By: Clement Foucault
This simplifies some memory management, ammortizes some of the many
small allocations when building UI layouts, and simplifies the code
that deals with the groups. `uiBlock` is no longer a trivial type.
In my testing this saved a few ms when drawing a large node tree.
Duplicating context lists took a measurable amount of time when drawing
large node trees in the node editor. Instead of using a linked list of
entries, which results in many small allocations, use a vector. Also,
use std::string and StringRefNull instead of char buffers and pointers.
I had forgotten about curves sculpt mode when I wrote
this function. It just initializes the viewport
pivot point to the evaluated object bounding box.
Should be used inside the mode entry function.
Texpaint now bounds checks material indices when looking up
materials, in case the user has corrupted the material_index
attribute somehow. We may wish to report this to the user
somehow on entering texture paint mode.
Partially addresses T72011.
The problem here is that the previous barycentric clamping did not deal well
with skinny triangles and would end up generating "sub-pixel jittering"
locations that were actually >20 pixels away.
Differential Revision: https://developer.blender.org/D16727
Previously, the code tried to keep node groups working even if some of
their input/output sockets had undefined type. This caused some
complexity with no benefit because not all places outside of this file
would handle the case correctly. Now node groups with undefined
interface sockets are disabled and have to be fixed manually before
they work again.
Undefined interface sockets are mostly caused by invalid Python
API usage and incomplete forward compatibility (e.g. when newer
versions introduce new socket types that the older version does
not know).
Avoid utility function call that would query the file system, this was a
bottleneck. The path joining was also problematic. See patch for more
details.
Differential Revision: https://developer.blender.org/D16768
Reviewed by: Jacques Lucke
Expands Color Mix nodes with new Exclusion mode.
Similar to Difference but produces less contrast.
Requested by Pierre Schiller @3D_director and
@OmarSquircleArt on twitter.
Differential Revision: https://developer.blender.org/D16543
Materials without connections to the output node would crash with OSL
in OptiX, since the Cycles `OSLCompiler` generates an empty shader
group reference for them, which resulted in the OptiX device
implementation setting an empty SBT entry for the corresponding direct
callables, which then crashed when calling those direct callables was
attempted in `osl_eval_nodes`. This fixes that by setting the SBT entries
for empty shader groups to a dummy direct callable that does nothing.
Switching viewport denoising causes kernels to be reloaded with a new
feature mask, which would destroy the existing OptiX pipelines. But OSL
kernels were not reloaded as well, leaving the shading pipeline
uninitialized and therefore causing an error when it is later attempted to
execute it. This fixes that by ensuring OSL kernels are always reloaded
when the normal kernels are too.
Restrict the condition under which paint cursors read use the cursor
location from the the operating-system.
This caused a glitch when dragging UI elements in painting context
popup. Since the paint cursor would display using mouse motion
which was clamped to the window center - an internal detail of hidden
cursor grabbing.
Now only read the cursor coordinates when clamped to a region which
is used for the transform cursor to stay visible even when the cursor
wraps around.
Recent reverting of changes to cursor grabbing intended to match
Blender 3.3 release. This is the case for 3.4x branch, however there is
an additional change to grabbing on WIN32 by Germano [0] which is a
significant improvement on old grabbing logic for Windows.
So instead of matching 3.3x behavior, restore logic that keeps
the cursor centered while grabbing & hidden.
This re-introduces T102792 issue displaying the paint-brush while
dragging buttons, this will have to be solved separately.
Re-apply [1] & [2], revert [3] & [4].
[4]: a3a9459050
[0]: 9fd6dae793
[1]: 4cac8025f0
[2]: 230744d6fd
[3]: 0240b89599
The paint cursor was continuously set which meant hiding the cursor
while interacting with buttons would immediately show it again.
This exposed cursor warping.
Small roundoff errors during UV editing can sometimes occur, most likely
due to so-called "catastrophic cancellation".
Here we set a tolerance around zero when using Constrain-To-Bounds and UV Scaling.
The tolerance is set at one quarter of a texel, on a 65536 x 65536 texture.
TODO: If this fix holds, we should formalize the tolerance into the UV editing
subsystem, perhaps as a helper function, and investigate where else it needs
to be applied.
Differential Revision: https://developer.blender.org/D16702
When migrating to the new packing API, pin_unselected was not
implemented correctly.
Regression from rB143e74c0b8eb, rBe3075f3cf7ce, rB0ce18561bc82.
Differential Revision: https://developer.blender.org/D16788
Reviewed By: Campbell Barton
Duplicated in blender-v3.4-release as rB3dcd9992676a
Upon conversion, the newly-created UV map with default name "UVMap"
should be translated.
Reviewed By: mont29
Maniphest Tasks: T103183
Differential Revision: https://developer.blender.org/D16775
Replace ../lib/linux_centos7_x86_64 with ../lib/linux_x86_64_glibc_228,
built with Rocky8 Linux, compatible with the VFX platform CY2023,
see: T99618.
- Update build-bot configuration.
- Remove unnecessary check for Blosc, this is part of OpenVDB lib now.
- Remove WITH_CXX11_ABI, always use new C++11 ABI now
- Replace centos7 by glibc_228 everywhere
Note that existing builds with cached paths pointing to
"../lib/linux_centos7_x86_64" will need to be updated.
Includes contributions by Brecht.
Attributes are unifying around a name-based API, and we would like to
be able to move away from CustomData in the future. This patch moves
the identification of active and fallback (render) color attributes
to strings on the mesh from flags on CustomDataLayer. This also
removes some ugliness used to retrieve these attributes and maintain
the active status.
The design is described more here: T98366
The patch keeps forward compatibility working until 4.0 with
the same method as the mesh struct of array refactors (T95965).
The strings are allowed to not correspond to an attribute, to allow
setting the active/default attribute independently of actually filling
its data. When applying a modifier, if the strings don't match an
attribute, they will be removed.
The realize instances / join node and join operator take the names from
the first / active input mesh. While other heuristics may be helpful
(and could be a future improvement), just using the first is simple
and predictable.
Differential Revision: https://developer.blender.org/D15169
If the resulting geometry from applying a geometry nodes modifier
contains no mesh, give an error message. This gives people something to
search and makes the behavior more purposeful.
Also remove the `modifyMesh` implementation from the geometry nodes
modifier, since it isn't necessary anymore. And remove the existing
"Modifier returned error, skipping apply" message which was cryptic
and redundant if applying returns an actual error message.
Resolves T103229
Differential Revision: https://developer.blender.org/D16782
This patch allows skipping the automatic insertion of nodes on top of
links when the transform operator ends. When putting nodes into small
spaces this often gets in the way and wastes time. Now, when holding
`alt`, this is turned off.
The header text is also improved to add this shortcut and to remove
the Dx and Dy values and improve the formatting a bit.
Making this functionality optional might allow us to use it in more
places in the future, like for the nodes added by link-drag-search.
Differential Revision: https://developer.blender.org/D16230
The function was highly related to the apply modifier operator,
and only used once. This was too specific to be in the blenkernel,
especially in a mesh conversion file.
This was missing some paths setup in the environment, ctest
normally sets this up before running the tests from the CLI
but that does not help the IDE all that much.
After switching over to using start_frame / end_frame, scaling an NLA strip didn't scale the strip, it just repeated the action.
Now withing the NLA transform code, we look for TFM_TIME_EXTEND / TFM_TIME_SCALE transform mode, and handle the update to strip scale accordingly
Since rB8014180720d8, all paint modes support orbiting around last
stroke, so [a] the comment there is out of date and [b] the fallback
case of orbiting around the center will never be used (unless there is
no stroke information - but BKE_paint_stroke_get_average handles that
anyways).
Spotted while looking into T101766.
Maniphest Tasks: T101766
Differential Revision: https://developer.blender.org/D16779
The problem was the bake function was using the evaluated
data and must use the original data.
The problem was caused by commit: rBcff6eb65804d: Cleanup: Remove duplicate Bake modifier code.
Fix by Philipp Oeser
Editmode should display the original (non-evaluated) points unless there
is something like an "On Cage" option of a modifier [which none of the
curves modifiers have].
This was not the case since the introduction in rBe15320568a29.
So we now draw the editpoints from the original curves. This also means
that original and evaluated curves might not have the same number of
points, so we have to get independent of `proc_point_buf` since that
would possibly create vertexbuffers of different sizes (compared to the
original curves) which is not allowed for a single batch.
- remove the "pos" alias from the vertex buffer format of proc_point_buf
- instead, create a new "edit_points_pos" vertex buffer
- fill that with the original (un-evaluated) curves positions
- dont request `proc_point_buf` anymore
- rename the editpoints flags buffer to be more consistent
And since original and evaluated points might also be in completely
different positions, we also need to draw connecting lines between those
editpoints to not have them float in thin air. For drawing these in
editmode, a simple polyline was chosen (instead of drawing lines in a
resolution that is take from the old particle system -- which is not
depending on points even but has a hardcoded resolution that can only be
upped by the hair_subdiv scene render setting)
- create appropriate batch and indexbuffer for this
- positions vertex buffer can be reused
- reuse particle edit shader (instead of curve edi shader) to get
segment highlighting
{F14055436}
NOTE: this also removes the broken depth handling and instead makes it
work (also XRay is properly taken into account) by binding the correct
overlay framebuffer.
NOTE: to further clarify the distinction between curves drawing (that is
based on the old partice system drawing) and drawing in editmode, the
corresponding vertexbuffers have been moved out of CurvesEvalCache into
CurvesBatchCache directly.
NOTE: drawing the lines in editmode could be improved (taking the "real"
resolution of splines into account, but since this should happen on the
GPU in a compute shader, this is for later)
Potentionally fixes T101889.
Maniphest Tasks: T101889
Differential Revision: https://developer.blender.org/D16281
Under Wayland the transform cursor wasn't displaying the warped cursor.
This worked on other platforms because cursor motion is warped where as
Wayland simulates cursor warping, so it's necessary to apply warping
when requesting the cursor location too.
- Use typed enum for the wrap axis.
- Rename `bounds` to `wrap_region`.
- Take a `rcti` argument instead of an `int[4]`.
- Pair wrap & wrap_region arguments together.
This is an alternative fix to [0] which kept the cursor centrally
located as part of GHOST cursor grabbing which caused T102792.
Now this is done as part of walk mode as it's the operator that most
often ran into this problem although ideally this would be handled by
GHOST - but that's a much bigger project.
[0]: 9fd6dae793
Historically checks for windowing capabilities used platform
pre-processor checks however that doesn't work when Blender is built
with both X11 & Wayland.
Add a capabilities flag which can be used to check which functionality
is supported. This has the advantage of being more descriptive/readable.
This reverts commits
9fd6dae793,
4cac8025f0 (minor cleanup).
Re-introducing T102346, which will be fixed in isolation.
Unfortunately even when the cursor is hidden & grabbed,
the underlying cursor coordinates are still shown in some cases.
This caused bug where dragging a button in the sculpt-context popup
would draw the brush at unexpected locations because internally
the cursor was warping in the middle of the window, reported as T102792.
Resolving this issue with the paint cursor is possible but tend towards
over-complicated solutions.
Revert this change in favor of a more localized workaround for walk-mode
(as was done prior [0] to fix T99021).
[0]: 4c4e8cc926
This was only called once in a situation where such functions
are typically used as a dynamic enum callbacks.
Prefer keeping the items close to the EnumProperty definition &
avoid the need to note why this is a special case that doesn't follow
the common pattern for enum callbacks.
- Follow sphinx conventions for doc-strings.
- Use __slots__ for KeyframesCo as dynamically assigning new members
isn't needed.
- Import from bpy.types instead of assigning.
- Split typing imports across multiple lines as they tend to become
quite large.
This is a solution in response to the issues mentioned in comments on
rBe4f1d719080a and T103088.
Apparently the workaround of checking if the mouse is already inside
the area on the next event doesn't work for some tablets.
Perhaps the order of events or some very small jitter is causing this
issue on tablets. (Couldn't confirm).
Whatever the cause, the solution of checking the timestamp of the event
and thus ignoring the outdated ones is theoretically safer.
It is the same solution seen in MacOS.
Also calling `SendInput` 3 times every warp ensures that at least one
event is dispatched.
This adds a new mirror image extension type for shaders and
geometry nodes (next to the existing repeat, extend and clip
options).
See D16432 for a more detailed explanation of `wrap_mirror`.
This also adds a new sampler flag `GPU_SAMPLER_MIRROR_REPEAT`.
It acts as a modifier to `GPU_SAMPLER_REPEAT`, so any `REPEAT`
flag must be set for the `MIRROR` flag to have an effect.
Differential Revision: https://developer.blender.org/D16432
The `render_color_index` skips attributes with different types
and domains in order to give the proper order for the UI list.
That is a different than an index in the group of all attributes.
The most solid solution I could think of is exposing the name of
the default color attribute. It's "solid" because we always address
attributes by name internally. Doing something different is bound
to create problems. It's also aligned with the design in T98366 and
D15169.
Another option would be to change the way the "attribute index"
is incremented in Cycles. That would be a valid solution, but would
be more complex and annoying.
For consistency, I also exposed the name of the active color attribute
the same way, though it isn't necessary to fix this particular bug.
The properties aren't editable, that can come in 3.5 as part of D15169.
Differential Revision: https://developer.blender.org/D16769
This is essentially a left-over from the initial transition to fields where this was
forgotten. The mesh primitive nodes used to create a named uv map attribute
with a hard-coded name. The standard way to deal with that in geometry nodes
now is to output the attribute as a socket instead. The user can then decide
to store it as a named attribute or not.
The benefits of not always storing the named attribute in the node are:
* Improved performance and lower memory usage when the uv map is not
used.
* It's more obvious that there actually is a uv map.
* The hard-coded name was inconsistent.
The versioning code inserts a new Store Named Attribute node that
stores the uv map immediatly. In many cases, users can probably just
remove this node without affecting their final result, but we can't
detect that.
There is one behavior change which is that the stored uv map will be
a 3d vector instead of a 2d vector which is what the nodes originally created.
We could store the uv map as 2d vector inthe Store Named Attribute node,
but that has the problem that older Blender versions don't support this
and would crash immediately. Users can just change this to 2d vector
manually if they don't care about forward compatibility.
There is a plan to support 2d vectors more natively in geometry nodes: T92765.
This change breaks forward compatibility in the case when the uv map
was used.
Differential Revision: https://developer.blender.org/D16637
This is done based on the render sample count so that it doesn't impact
sampling quality. It's similar in spirit to the adaptive table size in D16561,
but in this case for performance rather than memory usage.
Differential Revision: https://developer.blender.org/D16726
The first two dimensions of scrambled, shuffled Sobol and shuffled PMJ02 are
equivalent, so this makes no real difference for the first two dimensions.
But Sobol allows us to naturally extend to more dimensions.
Pretabulated Sobol is now always used, and the sampling pattern settings is now
only available as a debug option.
This in turn allows the following two things (also implemented):
* Use proper 3D samples for combined lens + motion blur sampling. This
notably reduces the noise on objects that are simultaneously out-of-focus
and motion blurred.
* Use proper 3D samples for combined light selection + light sampling.
Cycles was already doing something clever here with 2D samples, but using
3D samples is more straightforward and avoids overloading one of the
dimensions.
In the future this will also allow for proper sampling of e.g. volumetric
light sources and other things that may need three or four dimensions.
Differential Revision: https://developer.blender.org/D16443
While it helps on many scenes, it can be disruptive for existing scenes and
for benchmarks the differences in timing can be confusing. So be a bit more
conservative and only it enable it for new scenes.
This allows choosing the 2d vector type in the Store Named Attribute
node. Similar to byte-colors, there is not a special socket type for this
(currently). In geometry nodes itself, vectors are all still 3d.
The "Loading Asset Libraries" label in the menu would already disappear
before the asset libraries are done loading. It only queried if the
loading was started, not if it was finished. Especially notable when the
asset library was slow to load, e.g. because it is not yet in the asset
index.
The use of a struct for device strings caused the CUDA compiler to
generate byte arrays as the argument type, whereas OSL generated
primitive integer types (for the hash). Fix that by using a typedef
instead so that the CUDA compiler too will use an integer type in the
PTX it generates.
Maniphest Tasks: T101222
This is because OB_MODE_SCULPT_CURVES is not part of OB_MODE_ALL_PAINT
(yet). While there is some chance it ends up there, there are a lot of
more places that need checking and so patch only fixes the report very
isolated.
NOTE: T93501 is related (since the option to show these should also be
hidden in sculptmode)
Maniphest Tasks: T101765
Differential Revision: https://developer.blender.org/D16764
Allow keyboard layouts which include "dead keys" to enter diacritics
by calling MapVirtualKeyW even when not key_down.
See D16770 for more details.
Differential Revision: https://developer.blender.org/D16770
Reviewed by Campbell Barton
Recently a new geometry node for splitting edges was added in D16399.
However, there was already a similar implementation in mesh.cc that was
mainly used to fake auto smooth support in Cycles by splitting sharp
edges and edges around sharp faces.
While there are still possibilities for optimization in the new code,
the implementation is safer and simpler, multi-threaded, and aligns
better with development plans for caching topology on Mesh and other
recent developments with attributes.
This patch removes the old code and moves the node implementation to
the geometry module so it can be used in editors and RNA. The "free
loop normals" argument is deprecated now, since it was only an internal
optimization exposed for Cycles.
The new mesh `editors` function creates an `IndexMask` of edges to
split by reusing some of the code from the corner normal calculation.
This change will help to simplify the changes in D16530 and T102858.
Differential Revision: https://developer.blender.org/D16732
Fixed more cases where attributes weren't being reinitialized
on switching PBVH mode:
* When PBVH_GRIDS and PBVH_BMESH force attributes into simple
array mode they no longer override simple_array in the
SculptAttributeParams parameters, instead they set a field
in SculptAttribute itself. Thus if the attribute is
reinitialized in another mode it won't retain the simple_array
parameter.
* sculpt_attribute_ensure_ex now calls sculpt_attr_update if
the attribute already exists.
* Fixed a bug from a couple commits ago that set
SculptAttribute.data_for_bmesh wrong.
PBVH draw code now builds coarse triangle index buffers
for multires. Note that the coarse grids can be at any
multires depth but is currently hardcoded to 1.
Previously the sculpt box trim operator always created face sets,
but after face sets became optional it only modified them if they
already existed. Absent a better way to turn the behavior on and off,
the fix is to just always create face sets.
Before f1c0249f34 the material was assigned to the previous
slot rather than the next. Though the behavior is arbitrary, there
is no reason to change it.
The `transform_convert_clip_mirror_modifier_apply` code is made more readable by:
- decreasing indentation;
- removing `axis` and `tolerance` variables;
- renaming `int clip` to `bool is_clipping`;
The comment of `solve_cubic()` put the coefficients of the to-be-solved
cubic equation in the wrong order. This is now fixed.
No functional change, just a comment fix.
When the line was very thin the precision of the thickness
calculation was not precise enough.
The algorithm has been improved. This affects SVG and PDF.
* Make it clearer that contrib isn't shipped with releases, by already excluding it in beta.
* Improve the UI by hiding the "Testing" enum item in these case.
Differential Revision: https://developer.blender.org/D16729
In preparation to sanatize the mask texture and color texture in sculpt code. In sculpt
mode the mask texture is read from mtex, leaving the mask_mtex when we want to use color
textures in sculpt mode.
Having all packages on one line made reviewing changes difficult.
Also note why Python modules are needed (with some TODO's where I wasn't
able to find any reason given for their inclusion).
The PKGCONFIG file exposes the OPUS include: requiring <opus/opus.h>
to be replaced with <opus.h>. Manipulate the PKGCONFIG file instead of
patching the source since the small change is only needed in one place.
Meson is built as part of external_python_site_packages,
without this dependency it would be called before being built.
Also remove Meson as a build requirement since the version is used.
Adds an early return if Position/Offset inputs won't lead
to any changes in the Geometry.
It now also compares with the read-only Position attribute instead of
getting it for write only, to work correctly with Copy-on-Write.
Before, the `is_same`-check only worked for geometry created
in the node tree.
Differential Revision: https://developer.blender.org/D16738
There has been an attempt to reorganize this part, however, it seems that didn't compile on HIP, and is reverted in
rBc2dc65dfa4ae60fa5d2c3b0cfe86f99dcb5bf16f. This is another attempt of refactoring. as I have no idea why some things don't work on HIP, it's
best to check whether this compiles on other platforms.
The main changes are creating a new struct named `MeshLight` that is shared between `KernelLightDistribution` and `KernelLightTreeEmitter`,
and a bit of renaming, so that light sampling with or without light tree could call the same function.
Also, I noticed a patch D16714 referring to HIP compilation error. Not sure if it's related, but browsing
https://builder.blender.org/admin/#/builders/30/builds/7826/steps/7/logs/stdio, it didn't work on gfx1102, not gfx9*.
Differential Revision: https://developer.blender.org/D16722
The OpenVDB delay loading of voxel leaf data using mmap works poorly on network
drives. It has a mechanism to make a temporary local file copy to avoid this,
but we disabled that as it leads to other problems.
Now disable delay loading entirely. It's not clear that this has much benefit
in Blender. For rendering we need to load the entire grid to convert to NanoVDB,
and for geometry nodes there also are no cases where we only need part of grids.
To avoid issues with lights being either skipped or sampled unnecessarily
when the exposure is set low or high.
Contributed by Alaska.
Differential Revision: https://developer.blender.org/D16703
* preempt_attr was copied from CUDA, but not used in HIP.
* Remove shadowed variable before conditional in EnvironmentTextureNode code.
Differential Revision: https://developer.blender.org/D16741
Expand the motion path frame range options with an extra option "Manual
Range". When chosen, Blender will not automatically update the path
range any more.
Additionally, the start/end frame fields are greyed out in the UI when
one of the automatic range options is selected (i.e. all but the new
"Manual Range" one). It is still possible to set the start/end frame
temporarily, but the original behaviour (of recomputing those on update)
remains.
Manifest Task: T101522
The catalog tree is a unit on its own, and should be tested separately.
This makes the testing files smaller and more focused, which can help
maintaining them.
This manages setting up asset library directories for testing, which is
useful for testing multiple asset library related compontents. So move
it to a common header. No reason to squeeze everything into one file
then.
Compile each static shader using shaderc to Spir-V binaries.
The main goal is to make sure that the GLSL created using ShaderCreateInfo and able to compile to Spir-V.
For the second stage a correct pipeline needs to be created and some shader would need more
adjustments (push constants size).
With this patch future changes to GLSL sources can already be checked against vulkan, without the
backend finished.
Mechanism has been tested using MacOS and MoltenVK. For other OS, we should finetune CMake
files to find the right location to shaderc.
```
************************************************************
*** Build Mon 12 Dec 2022 11:08:07 CET
************************************************************
Shader Test compilation result: 463 / 463 passed (skipped 118 for compatibility reasons)
OpenGL backend shader compilation succeeded.
Shader Test compilation result: 529 / 529 passed (skipped 52 for compatibility reasons)
Vulkan backend shader compilation succeeded.
```
Reviewed By: fclem
Maniphest Tasks: T102760
Differential Revision: https://developer.blender.org/D16610
Previously, it wouldn't detect the case when one mesh had an attribute
that the other one did not. Not sure if this always was the case or whether
this less strict test was implemented accidentally at some point.
But it below the `else` case to make the control flow clearer, since
in the end that is more important. Also clarify the wording and fix
grammar slightly.
Similar to previous commits, avoid using pointers that are redundant
to their corresponding index. Also avoid storing the edge vectors stack
in the data-per-loop when it can just be a function argument.
Face corner normals are calculated when auto smooth or custom
per-corner normals are used.
This brings the per-face-corner data from 64 to 24 bytes, as measured by
`sizeof`. In a large test file I observed a 20% performance improvement,
from 285 to 239 ms.
The loop was also retrievable with the index. This needed some care
though, because previously the index became "detached" from the
corresponding MLoop pointer for a short time.
Since face corner indices are available, using pointers to MLoop and
other data is redundant. Using fewer local variables means there is less
state to keep track of when reading the algorithm, even if it requires
more characters in some cases.
The `lnor` pointer was only used for fans containing a single face,
and can be retrieved for a specific loop from the common data anyway.
Also saves 8 bytes per corner during the calculation
Add `bNode::index()` to allow accessing node indices directly without
manually de-referencing the runtime struct. Also adds some asserts to
make sure the access is valid and to check the nodes runtime vector.
Eagerly maintain the node's index in the tree so it can be accessed
without relying on the topology cache.
Differential Revision: https://developer.blender.org/D16683
This adds an explicit post processing step to node declarations.
The purpose of this is to keep the actual node declaration functions
concise by avoiding to specify redundant information. Also it improves
the separation of the creation of the declaration from using it.
This made it harder to change these functions in the future.
No functional changes are expected and the versioning worked correctly
in my test with a files created in Blender 2.69.
Adding the sockets in the function was not necessary in my test, because
those were already added before as part of `node_verify_sockets` in
`ntreeBlendReadLib`. I kept it in just to be on the safe side.
The problem was the bounding box was calculated using
all strokes, but if a filter is added, the bounding box must
include only selected strokes.
Fix by @frogstomp
Improve a few messages, but mostly fix typos in many areas of the UI.
See inline comments in the differential revisiion for the rationale
behind the various changes.
Differential Revision: https://developer.blender.org/D16716
Using a cache greatly simplifies access to the output node.
I touched on the most common and understandable cases for me.
The texture nodes were touched because it looked pretty generic.
Differential Revision: https://developer.blender.org/D16699
Add preferred domain based on the "Value" input field. Most often,
the domain must match the original domain for the value.
Differential Revision: https://developer.blender.org/D16730
Apple notarization rejects packages containing them.
Similar to rpaths we handle generically this as part of the harvest step rather
than patches individual library builds systems.
Ref T99618
This allows using the "On Cage" feature in edit mode to interact with
original mesh elements via the newly created geometry. The original
indices are only set for new elements that copy attribute values
from original elements directly, so it can also be a helpful way
to visualize attribute propagation.
The change was simplified by refactoring the individual mode slightly
to create separate index maps for the new edges and vertices. That
simplified attribute copying a bit too.
This is partially a bug fix, since the original index layer wasn't
handled at all before, and could be left initialized. That was caused
by my recent change to modify a mesh in place rather than create a
new one. Also copy over any orco data, which was another unhandled
layer type.
It's also a new feature though, since it allows using the "On Cage"
feature of edit mode to adjust original mesh elements by selecting
the new ones. This brings the functionality inline with the Edge Split
modifier.
- Added comment for additional tasks to do when bumping python
- updated sqlite to 3.39.4
- downgrade setuptools to 63.2.0 to avoid numpy build issues
- numpy 1.23.5
Don't use the same "context" struct for tagging sharp edges from auto-
smooth / poly flags and actually calculating face corner normals. That
required more arguments, and it required breaking const slightly to
reuse the code. Also split apart pre-populating corner normals
with vertex normals, since it isn't related at all and is only used
in one code path.
Image engine uses 4 gpu textures that are as large as the area being
drawn. The amount of needed GPU memory can be reduced by dividing the
region in smaller parts. Reducing the GPU memory also reduces the stalls
when updating the textures, improving the performance as well.
This optimization works, but is disabled for now due to some rounding
errors that drawn lines on the screen where the screen is divided.
It used to be a number of fixed full screen images where the
responsibility was at image engine. Now moved the responsibility to the
drawing mode to make sure we can allocate non-full region-size textures
in a future refactoring.
`get_gpu_textures` was created when the image engine didn't support
texture streaming and used the gpu textures that were stored in the
image buffer itself.
This patch implements the Simple Star Glare node. This is only an approximation
of the existing implementation in the CPU compositor, an approximation that
removes the row-column dependency in the original algorithm, yielding an order
of magnitude faster computations. The difference due to the approximation is
readily visible in artificial test cases, but is less visible in actual use
cases, so it was agreed that this approximation is worthwhile.
For the future, we can look into approximating this further using a closed form
IIR recursive filter with parallel interconnection and block-based parallelism.
Which is expected to yield another order of magnitude faster computations.
The different passes can potentially be combined into a single shader with some
preprocessor tricks, but doing that complicated that code in a way that makes
it difficult to experiment with future optimizations, so I decided to leave it
as is for now.
Differential Revision: https://developer.blender.org/D16724
Reviewed By: Clement Foucault
This patch implements the Ghost Glare node. It is implemented using
direct convolution as opposed to a recursive one, which produces
slightly different results---more accurate ones, however, since the
ghosts are attenuated where it matters, the difference is barely
visible and is acceptable as far as I can tell.
A possible performance improvement is to implement all passes in a
single shader dispatch, where an array of all scales and color
modulators is computed recursively on the host then used in the shader
to add all ghosts, avoiding usage of global memory and unnecessary
copies. This optimization will be implemented separately.
Differential Revision: https://developer.blender.org/D16641
Reviewed By: Clement Foucault
These functions were originally implemented because:
- Not all of them existed pre C++17, but now we are using C++17.
- The call stack depth is quite a bit deeper with the std functions, making
debugging slower and more annoying. I didn't find this to be a problem
anymore recently.
No functional changes are expected.
Nodes which are common in multiple editors (RGB, Value, Switch, RGB to BW)
has less width in compositor editor. Patch changes compositor node width to
140 for consistency.
Reviewed by: HooglyBoogly
Differential Revision: https://developer.blender.org/D16719
OpenVDB likes to crash even in release builds when volumes become too small.
To fix this I used the same function that we use in other places already to
determine if the resulting volume will be too small.
Float images loaded in Blender are converted to scene linear and don't
require additional conversion. Image engine can reuse the rect_float of
those images. An assert statement is added tp make this more clear and
to test on missing code paths or future developments.
This splits the logic to detect if the MeshSequenceCache modifier
evaluation is for the ORCO mesh into its own function. This will allow
reusing the logic for when GeometrySet support is added to the modifier
(D11592).
No functionnal changes.
Differential Revision: https://developer.blender.org/D16611
Texture usage flags can now be provided during texture creation specifying
the ways in which a texture can be used. This allows the GPU backends to
perform contextual optimizations which were not previously possible. This
includes enablement of hardware lossless compression which can result in
a 15%+ performance uplift for bandwidth-limited scenes on hardware such
as Apple-Silicon using Metal.
GPU_TEXTURE_USAGE_GENERAL can be used by default if usage is not known
ahead of time. Patch will also be relevant for the Vulkan backend.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D15967
Fix a number of small memory leaks in the Metal backend. Unreleased blit
shader objects and temporary textures addressed. Static memory manager
modified to defer creation until use. Added reference count tracker to
shared memory manager across contexts, such that cached memory allocations
will be released if all contexts are destroyed and re-initialized.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D16415
Implementing non-geometry-shader path for rendering stencil shadows,
used by the workbench engine.
Patch also contains a few small modifications to Create-info to ensure
usage of gl_FragDepth is explicitly specified.
This is required for testing of the patch.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D16436
Implemented geometry shader alternative for rendering of UV edges in Metal, as geometry shaders are unsupported.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D16452
There is a more recent implementation as a geometry node, but this code
is used by RNA and Cycles still. In order to help understand the code
to tell if it can be replaced this makes some small changes:
- Use indexing instead of pointer incrementing
- Add const to unchanged arguments
- Avoid unnecessary indentation
- Use references for expected non-null arguments
On linux a man page is generated before the
scripts are installed, this lead to USD getting
a null pointer for it's pluging path and crashing
the process.
Porting conservative depth rendering to use non-geometry shader path for
Metal.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D16424
Additional mat3 constructors added, global variable namespace collisions
for uniform and object color avoided via re-name.
Metal vertex format compatibility added for shaders wherein vertex data
goes through a double-conversion and cannot be implicitly converted during
Metal vertex assembly e.g. bitmasks passed directly as unsigned type in
shader interface for certain shader interfaces.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D16433
Required by Metal backend for efficient shader compilation. EEVEE material
resource binding permutations now controlled via CreateInfo and selected
based on material options. Other existing CreateInfo's also modified to
ensure explicitness for depth-writing mode. Other missing bindings also
addressed to ensure full compliance with the Metal backend.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D16243
I organized the fields so that similar variables were closer together and
more "important" fields were closer to the beginning. I also added
comments to help describe the purpose of most fields.
Differential Revision: https://developer.blender.org/D16710
Based on feedback from Simon Thommes, for link-drag-serach it's most
useful to have the A and B sockets connected, first, then the factor
sockets, then the special color mix operations. This addresses that by
adding the search items in order and decrementing a weight manually
as items are added.
The PDF of mesh lights were not being scaled by `pdf_selection` when
the light tree was disable. This resulted in the mesh lights having
the wrong PDF and thus the wrong brightness.
Differential Revision: https://developer.blender.org/D16717
Make the `Object *` and `Mesh *` parameter of `USD_mesh_topology_changed()`
`const`. This function only inspects them, and doesn't need to modify
them.
No functional changes.
Since moving to float scaling, the method of accessing the text
width with the aspect applied wasn't working properly.
Based on contributions by @lone_noel & @harley, see D15043.
The optimization is done by removing the `len` member from the groups
and using fewer `for` loops.
But it's not a really impactful optimization.
Only 1.9% in the weld operation of a high poly mesh.
(disregarding getting the vertex map and all other operations on a
Blender frame).
The readability improvement comes from using more familiar types like
`int` and `int2` instead of `WeldGroup` and `WeldGroupEdge` structs.
In the merge_by_distance code, `vert_dest_map` is modified to become a
vertex group map. But this is not clear from the code.
Also use the `_map` suffix on `vert_final` and `edge_final`.
And remove some unnecessary variables.
The wrap function was a feature of the old compositor
but was never ported to the new CPP compositor node.
This simply removes the unused property, the function could alternatively be
restored but in has been missing for a decade so it does not seem missed.
Differential Revision: https://developer.blender.org/D16712
Fixes T102796
This diff improves the docs for bmesh by adding the default values to all methods. This is motivated by this issue https://github.com/nutti/fake-bpy-module/issues/118 in fake-bpy-module which generates a typed API for authoring Blender scripts and addons from the docs.
After this diff gets merged, the Blender docs get updated, and `fake-bpy-module` gets regenerated, the type signatures in `fake-bpy-module` will match the reality of Blender's API.
Here's a diff for the docs using the modified script:
https://gist.github.com/xixixao/1c83153adbcefbe0859f9cc9ba757d46
I "hardcoded" the defaults based on the types of the arguments, after some testing and consulting the Blender .c source for these APIs.
Here's a test script that verifies that the arguments with defaults added in this diff are indeed not required by Blender 3.3: https://gist.github.com/xixixao/adc4e5a076e80a63735bd60c7c9e7a0d
I made the minimum changes required to get this doc generation script fixed, but let me know if I should restructure this script more.
I also amended the comments of three args, 2 to align them with Python (NULL -> None) and one to mark it as optional (CurveProfile).
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D16400
The executable would get boost python linking in when not needed, and even when
linking to Python libraries there were still unresolved symbols. Instead split
off boost python libraries and link them only where needed.
Compiling Cycles in Visual Studio 2022 yields the error:
C4146: unary minus operator applied to unsigned type, result still unsigned
Replacing it with explicit two's complement achieves the same result as signed
negation but avoids the error.
Differential Revision: https://developer.blender.org/D16616
For file formats like PNG, JPEG and TIFF. Eventually this should use
the OpenColorIO view transform, but this at least makes the image
closer to what it should be in most cases.
Differential Revision: https://developer.blender.org/D16482
The Blur Attribute node mixes values of neighboring elements in meshes and curves.
Currently it supports points, edges and faces on meshes and points on curves.
In theory, support for face corners could be added, but useful semantics are not
obvious yet.
The node calculates a weighted average of each element with its neighbors (based
on curve/mesh topology). The weight of the element itself is always 1, and the weight
of the neighbor elements is controlled by the weight input socket. In the future,
more options for how different elements are weight can be added (e.g. smoothing
groups and selection).
The node can perform multiple blurring iterations to achieve a blurrier result.
Generally, it is better to do multiple iterations in one node instead of using
multiple blur nodes because it has better performance in the current implementation.
We use the term "Blur" (instead of "Smooth") because smoothing is generally more
related to removing roughness from surfaces. When viewing the result of the
Blur Attribute node in the viewport, it looks like an image is blurred. While the
node can also be used to smooth surfaces, other/better algorithms exists for that
purpose (which e.g. don't reduce the volume of the mesh to zero with too many
iterations).
Differential Revision: https://developer.blender.org/D13952
**Problem**:
Area lights in Cycles have spread angle, in which case some part of the area light might be invisible to a shading point. The current implementation samples the whole area light, resulting some samples invisible and thus simply discarded. A technique is applied on rectangular light to sample a subset of the area light that is potentially visible (rB3f24cfb9582e1c826406301d37808df7ca6aa64c), however, ellipse (including disk) area lights remained untreated. The purpose of this patch is to apply a techniques to ellipse area light.
**Related Task**:
T87053
**Results**:
These are renderings before and after the patch:
|16spp|Disk light|Ellipse light|Square light (for reference, no changes)
|Before|{F13996789}|{F13996788}|{F13996822}
|After|{F13996759}|{F13996787}|{F13996852}
**Explanation**:
The visible region on an area light is found by drawing a cone from the shading point to the plane where the area light lies, with the aperture of the cone being the light spread.
{F13990078,height=200}
Ideally, we would like to draw samples only from the intersection of the area light and the projection of the cone onto the plane (forming a circle). However, the shape of the intersection is often irregular and thus hard to sample from directly.
{F13990104,height=200}
Instead, the current implementation draws samples from the bounding rectangle of the intersection. In this case, we still end up with some invalid samples outside of the circle, but already much less than sampling the original area light, and the bounding rectangle is easy to sample from.
{F13990125}
The above technique is only applied to rectangle area lights, ellipse area light still suffers from poor sampling. We could apply a similar technique to ellipse area lights, that is, find the
smallest regular shape (rectangle, circle, or ellipse) that covers the intersection (or maybe not the smallest but easy to compute).
For disk area light, we consider the relative position of both circles. Denoting `dist` as the distance between the centre of two circles, and `r1`, `r2` their radii. If `dist > r1 + r2`, the area light is completely invisible, we directly return `false`. If `dist < abs(r1 - r2)`, the smaller circle lies inside the larger one, and we sample whichever circle is smaller. Otherwise, the two circles intersect, we compute the bounding rectangle of the intersection, in which case `axis_u`, `len_u`, `axis_v`, `len_v` needs to be computed anew. Depending on the distance between the two circles, `len_v` is either the diameter of the smaller circle or the length of the common chord.
|{F13990211,height=195}|{F13990225,height=195}|{F13990274,height=195}|{F13990210,height=195}
|`dist > r1 + r2`|`dist < abs(r1 - r2)`|`dist^2 < abs(r1^2 - r2^2)`|`dist^2 > abs(r1^2 - r2^2)`
For ellipse area light, it's hard to find the smallest bounding shape of the intersection, therefore, we compute the bounding rectangle of the ellipse itself, then treat it as a rectangle light.
|{F13990386,height=195}|{F13990385,height=195}|{F13990387,height=195}
We also check the areas of the bounding rectangle of the intersection, the ellipse (disk) light, and the spread circle, then draw samples from the smallest shape of the three. For ellipse light, this also detects where one shape lies inside the other. I am not sure if we should add this measure to rectangle area light and sample from the spread circle when it has smaller area, as we seem to have a better sampling technique for rectangular (uniformly sample the solid angle). Maybe we could add [area-preserving parameterization for spherical
ellipse](https://arxiv.org/pdf/1805.09048.pdf) in the future.
**Limitation**:
At some point we switch from sampling the ellipse to sampling the rectangle, depending on the area of the both, and there seems to be a visible line (with |slope| =1) on the final rendering
which demonstrate at which point we switch between the two methods. We could see that the new sampling method clearly has lower variance near the boundaries, but close to that visible line,
the rectangle sampling method seems to have larger variance. I could not spot any bug in the implementation, and I am not sure if this happens because different sampling patterns for ellipse and rectangle are used.
|Before (256spp)|After (256spp)
|{F13996995}|{F13996998}
Differential Revision: https://developer.blender.org/D16694
Part of the workaround for NVIDIA driver issue got lost in the changes to
switch to the GPU module.
Differential Revision: https://developer.blender.org/D16709
If there is a layer that hasn't frames but is not the active layer
the pointer to frames can be NULL and crash.
Now, the empty layers are skipped.
Reported to me by Samuel Bernou.
Image engine is used to draw the image inside the image editor, uv editor and node editor. The
performance during scrolling wasn't smooth when using larger textures on a dedicated GPU. Main
reason was the data transfers that happens when panning the image.
The original idea of the image engine was to have 4 textures that are as large as the editor.
Those textures would be used to simulate a larger canvas where if the texture is out of the
visible area the texture would be reused to contain the data of a new visible area. This would
reduce the data transfers to only on certain x/y coordinates. Between those coordinates no
data transfers would be needed.
This patch implements the mechanism described above. During development other areas to
improve have been detected (incorrect color management for float textures, using different
image formats to reduce data transfer bandwidths, using different render techniques for
images upto 8k). More improvements will follow.
This updates the libraries dependencies for VFX platform 2023, and adds various
new libraries. It also enables Python bindings and switches from static to
shared for various libraries.
The precompiled libraries for all platforms will be updated to these new
versions in the coming weeks.
New:
Fribidi 1.0.12
Harfbuzz 5.1.0
MaterialX 1.38.6 (shared lib with python bindings)
Minizipng 3.0.7
Pybind11 2.10.1
Shaderc 2022.3
Vulkan 1.2.198
Updated:
Boost 1.8.0 (shared lib)
Cython 0.29.30
Numpy 1.23.2
OpenColorIO 2.2.0 (shared lib with python bindings)
OpenImageIO 2.4.6.0 (shared lib with python bindings)
OpenSubdiv 3.5.0
OpenVDB 10.0.0 (shared lib with python bindings)
OSL 1.12.7.1 (enable nvptx backend)
TBB (shared lib)
USD 22.11 (shared lib with python bindings, enable hydra)
yaml-cpp 0.8.0
Includes contributions by Ray Molenkamp, Brecht Van Lommel, Georgiy Markelov
and Campbell Barton.
Ref T99618
Instead of the the same folder as the Blender executable, generate a manifest
that lets us move the libraries out of the way of users and into a separate
folder.
Ref T99618
This is not compatible with upcoming shared libraries usage, where we can't
let each library have their own libstdc++ and safely exchange memory.
Hopefully it is no longer required either. This is from before Blender builds
were even made on CentOS 7, and there is no obvious reason it is still needed.
Ref T99618
Shared libraries and USD plugins will be placed in the same folder, where USD
already looks for plugins.
This means that specifying the path to the plugins will no longer be needed
once the new libraries are available for all platforms. For now the code was
refactored to support both cases.
Ref T99618
Ensure the environment is set up for blender_test, idiff and oslc so that they
can find the required shared libraries.
Also deduplicate add_bundled_libraries() between Linux and macOS.
Includes contributions by Ray Molenkamp and Brecht Van Lommel.
Ref T99618
This patch adds a new `max_working_set_exceeded()` check on Metal so that we can display a "System is out of GPU memory" message to the user. Without this, we get obtuse "CommandBuffer failed" errors at render time due to exceeding the size limit of resident resources.
Likely fix for T101787 & T102786.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D16713
Issue was the lifetime of GPUVertFormat & GPUVertAttr.
Both need to be static in the function to be persistent here (and
handled appropriately).
Was an error in rB319ee296fd0c.
Maniphest Tasks: T102966
Differential Revision: https://developer.blender.org/D16704
Support Esc / RMB to cancel dolly, move, rotate & zoom.
Previously only roll could be canceled.
This can be useful to temporary orbit away from the camera or an
orthographic view without having to manually set it back.
- Add VIEW_CANCEL event_code.
- De-duplicate operator freeing logic for the roll operator.
- Structure checks so adding cancel is is simplified.
- Split event checks into two blocks, one for model events, another
for all other events.
Migrate (some) of the UDIM offset calculation from inside one
of the packing engines (where it's consumed) to the packing
operator (where it's produced).
This change (and others) will help simplify the future migration
of the packing engine inside editors/uvedit/uvedit_islands.cc
to the Geometry module, so it can eventually replace the other
packing engine in geometry/intern/uv_parametrizer.cc
Store the potentially owned mesh separately from the original/evaluated
mesh which is now stored with a const pointer. Also store mesh spans
separately in the class so they don't have to be retrieved for every
index.
Avoid using an incremented "loop index" variable which makes the whole
data-filling necessarily sequential. No functional changes expected,
this just simplifies some refactors to face corner storage.
Translation from python enum values were incorrect and textures created
in python using those types would result in faulty textures. In
renderdoc those textures would not bind.
Remove most of the old (pre-3.0) pose library:
- Remove The entire `editors/armature/pose_lib.c` file
- Deprecate `Object::poselib` in DNA
- Remove Operators marked as deprecated in T93405
- Remove RNA property `Object.pose_library`
- Add comment to clarify that the call `BLO_read_id_address(reader,
ob->id.lib, &ob->poselib);` handles deprecated data.
Note that this functionality has been documented as deprecated since
Blender 3.2.
What remains of the old pose library: The DNA for action markers
(`bAction::markers`) and the corresponding Python API. This will allow
future versions of Blender to still convert old pose libraries to new
ones (via the Pose Library panel in the Action editor).
Manifest task: T93406
Bugs that caused wrong renders should be fixed now, and tests that showed minor
floating point differences on platforms were tweaked to sidestep the problem.
Ref T77889
Ensure that thumbnails of images with aspect greater than 256:1 have
dimensions of at least one pixel.
See D16707 for more details
Differential Revision: https://developer.blender.org/D16707
Reviewed by Brecht Van Lommel
We need to ensure the mask layer exists before running the operator.
I made the order of function calls here the same as in newer code later
on in this file for consistency.
Differential Revision: https://developer.blender.org/D16696
Ensure that thumbnails of images with aspect greater than 256:1 have
dimensions of at least one pixel.
See D16707 for more details
Differential Revision: https://developer.blender.org/D16707
Reviewed by Brecht Van Lommel
We need to ensure the mask layer exists before running the operator.
I made the order of function calls here the same as in newer code later
on in this file for consistency.
Differential Revision: https://developer.blender.org/D16696
Simplify checks so that one check doesn't influence the following one.
Checks no longer pass the last-visited frame number into the "start frame"
parameter of the next check. This way all test values are hard-coded and
easy to read, without having to understand how all the checks fit together.
No functional changes.
Replace `EXPECT_NE(column, nullptr)` with `ASSERT_NE(column, nullptr)` to
abort the test on failure. With `EXPECT_NE`, the test would continue onto
the next like, which accesses `column->cfra` and would segfault.
No functional changes to the tests. Just better reporting of failures.
rB8b7cd1ed2a17 broke this for the paint slots
rB4669178fc378 broke this for regular attributes
Name filtering in UI Lists works when:
- [one] the items to be filtered have a name property
-- see how `uilist_filter_items_default` gets the `namebuf`
- [two] custom python filter functions (`filter_items`) implement it
themselves
-- if you use `filter_items` and dont do name filtering there, the default
name filtering wont be used
So, two problems with rB8b7cd1ed2a17:
- [1] items to be listed changed from `texture_paint_images` to
`texture_paint_slots`
-- the former has name_property defined, the later lacks this
- [2] the new `ColorAttributesListBase` defined a `filter_items` function,
but did not implement name filtering
And the problem with rB4669178fc378:
- it added `filter_items` functions, but did not implement name filtering.
These are all corrected now.
Fixes T102878
Maniphest Tasks: T102878
Differential Revision: https://developer.blender.org/D16676
This unassign the Alt+D shortcut from the detach operator. Right now the
operator has to be accessed via the menu.
Alt+D is left for duplicate link, following the other editors.
Cursor motion events on windows read the position from GetCursorPos()
which wasn't always the same location stored in `lParam`.
In situations where events were handled immediately this wasn't often a
problem, for heavier scenes or when updates between event handling was
slow - many in-between cursor events would be incorrect.
This behavior dates back to the initial commit, there doesn't seem to be
a good reason not to use the cursor coordinates from the event.
Noticed when investigating T102346.
Make OpenGL errors match formatting used by GCC & clang
(as well as Blender's logging), so utilities that recognize this
convention can be used to quickly access this location.
Detect when the operator adds its own undo step and clear the panel.
An alternative fix for [0] which caused T101743.
Needed to prevent changing values in the last operator panel from
destructively undoing brush steps.
[0]: 11bdc321a2.
Reviewed By: mont29, joeedh
Ref D16523
This reverts commit 11bdc321a2.
This change caused T101743, in general OPTYPE_UNDO should not be used
to control the UI.
This also caused 2x undo pushes to be performed when sculpting,
although sculpt mode doesn't add a step for the second undo push
so it wasn't visible to the user.
An alternative fix will be applied separately as it's too risky this
close to a release.
The following functions only supported back slashes on WIN32,
which can use both forward and back slashes.
- BLI_path_append
- BLI_path_append_dir
- BLI_path_slash_ensure
- BLI_path_slash_rstrip
Follow up to [0] which is a more limited bug-fix.
[0]: a16ef95ff6
Support both forward and back slashes on WIN32.
Forward slashes for paths in WIN32 was removed in [0] (for BLI_path_join)
& [1] (for BLI_path_name_at_index), this is correct on UNIX as back
slashes can be used in paths but not on WIN32 which can use both.
Note that other path functions such as BLI_path_append &
BLI_path_slash_ensure should be updated too, but this is out of scope
for a bug-fix.
Documenting and ensuring Windows path handling functions all handle
forward slashes can be done separately.
[0]: 8f7ab1bf46
[1]: 511ae22264
Reviewed By: harley
Ref D16700
When triangulating meshes, the UV unwrapper was previously using a
heuristic to split quads into triangles. If one of the internal angles
is greater than 180degrees, a so-called "reflex angle", the heuristic
was giving a poor choice of split.
Instead of using a special case for quads, this change routes everything
through the generic n-gon `BLI_polyfill_beautify` method instead.
Reviewed By: Brecht Van Lommel
Differential Revision: https://developer.blender.org/D16505
When n-gons share vertices, their triangulation can be non-manifold,
even if the original mesh is manifold.
The UV Unwrapper does not currently work with non-manifold meshes.
This workaround attempts to modify the triangulation of n-gons in
the UV unwrapper to preserve the manifold property.
This change replaces the previous fix for quads, and extends it
to all n-gons.
See T84078 as motivation for this change.
Differential Revision: https://developer.blender.org/D16521
Make "Convert Attribute" and "Convert Color Attribute" operators
auto-fill their initial settings with active attribute's domain
and data type if it wasn't already set explicitly.
Differential Revision: https://developer.blender.org/D16550
You shouldn't be able to retrieve a mutable node from a const node tree
or a mutable socket from a const node. Use const_cast in one place in
order to correct this without duplicating the function, which is still
awkward in the C-API.
Uses a light tree to more effectively sample scenes with many lights. This can
significantly reduce noise, at the cost of a somewhat longer render time per
sample.
Light tree sampling is enabled by default. It can be disabled in the Sampling >
Lights panel. Scenes using light clamping or ray visibility tricks may render
different as these are biased techniques that depend on the sampling strategy.
The implementation is currently disabled on AMD HIP. This is planned to be fixed
before the release.
Implementation by Jeffrey Liu, Weizhen Huang, Alaska and Brecht Van Lommel.
Ref T77889
This was not working well in non-trivial scenes before the light tree, and now
it is even harder to make it work well with the light tree. It would average the
with equal weight for every light object regardless of intensity or distance, and
be quite noisy due to not working with multiple importance sampling.
We may restore this if were enough good use cases for the previous implementation,
but let's wait and see what the feedback is.
Some uses cases for this have been replaced by the shadow catcher passes, which
did not exist when this was added.
Ref T77889
Traverse all scene dependency graphs and stop audio playback for each
scene.
Also fixes T71233
Reviewed By: sergey, mont29
Differential Revision: https://developer.blender.org/D16646
The attribute smoothing node asks for the ability to have a factor
outside the range of 0 and 1. The problem with this is that there is a
negative weight assertion for some of the mixers. If mixing between 0
and 1, then at a factor of 2, one of the elements will be negative.
Differential Revision: https://developer.blender.org/D16351
In a few places, nodes were added without updating the Identifiers and
vector. In other places nodes we removed without removing from and
rebuilding the vector. This is solved in a few ways. First I exposed
a function to rebuild the vector from scratch, and added unique ID
finding to a few places.
The changes to node group building and separating are more involved,
mostly because it was hard to see the correct behavior without some
refactoring. Now `VectorSet` is used to store nodes involved in the
operation. Some things are handled more simply with the topology
cache and by passing a span of nodes.
The new atomic disjoint set uses additional atomics which are not supported
as intrinsics on all architectures and require linking to libatomic.
Now always link to libatomic on Linux when it is available, instead of only
checking if atomic add for int64_t requires linking to this library.
Thanks to Sergey for the help fixing this.
`is_internal` is supposed to mean that the attribute shouldn't be
visible in lists or the spreadsheet by default, and that it can't be
accessed in geometry nodes. But the value was reversed, which
just happened to work because the list filtering was swapped.
Differential Revision: https://developer.blender.org/D16680
It is not really used from any of the sources, including the
standalone app. Since we are moving to a more backend-independent
drawing it makes sense to remove header which was specific to
how Blender integrates Cycles into viewport.
There is probably some cleanup in CMake files is possible, but
there is some inter-dependency with USD.
Differential Revision: https://developer.blender.org/D16681
This change fixes issues with viewport rendering when Metal
GPU backend is used for drawing. This is not a default build
configuration and requires the following tweaks:
- Enable WITH_METAL_BACKEND CMake option (set it to on)
- Use `--gpu-backend metal` command line arguments
It also helps using the `--factory-startup` command line
argument to ensure Eevee is not used (it is not ported and
will crash).
The root of the problem was in the use of glViewport().
It is replaced with the GPU_viewport_size_get_i() which
is supposed to be portable equivalent form the GPU module.
Without this change the viewport size is detected to be 0
which backfired in few places.
The rest of the changes were to make the code more robust
in the extreme conditions instead of asserting or crashing.
Simplified and streamlined GPU resources creation in the
display driver. It was a bit convoluted mix of creation of
the GPU resources and resizing them to the proper size. It
even seemed to be done in the reverse order. Now it is as
simple as "just ensure GPU resources are there for the
given texture or buffer size".
Also avoid division by zero in the tile manager.
Differential Revision: https://developer.blender.org/D16679
Steps to reproduce were:
- Open a .blend file that is located inside of an asset library and
contains assets.
- Save and close the file.
- Open a new file (Ctrl+N -> General).
- Open asset browser and load the asset library from above.
- If the assets from the file above still show up, press refresh button.
- -> Assets from the file above don't appear.
Likely fixes the underlying issue for T102610. A followup will be needed
to correct the empty asset index files written because of this bug.
We're in the process of moving responsibilities from the file/asset
browser backend to the asset system. 1efc94bb2f introduces a new
representation for asset, which would own the asset metadata now instead
of the file data.
Since the file-list code still does the loading of asset libraries,
ownership of the asset metadata has to be transferred to the asset
system. However, the asset indexing still requires it to be available,
so it can update the index with latest data. So transfer the ownership,
but still keep a non-owning pointer set.
Differential Revision: https://developer.blender.org/D16665
Reviewed by: Bastien Montagne
This is a workaround required to get BAT reliably working again after
recent rB133dde41bb5b, which fixed many indirectly linked IDs being
tagged as directly linked, and therefore having their reference written
in .blend file.
It seems that BAT is still missing proper handling of some ID pointers.
Required for the end of the Heist production here at Blender Studio.
rB9fa4ceb340951 caused a forward compatibility issue.
Going forward, when changing socket names, only the name should be
changed and not the identifier if possible.
The existing `DisjointSet` data structure only supports single
threaded access, which limits performance severely in some cases.
This patch implements `AtomicDisjointSet` based on
"Wait-free Parallel Algorithms for the Union-Find Problem"
by Richard J. Anderson and Heather Woll.
The Mesh Island node also got updated to make use of the new data
structure. In my tests it got 2-5 times faster. More details are in 16653.
Differential Revision: https://developer.blender.org/D16653
When entering paint modes the paint pivot was cleared,
which broken rotate around pivot. Fixed for all paint modes.
PBVH modes set the pivot to the PBVH bounding box
while texture paint uses the evaluated mesh bounding box.
90ea1b7643 broke the sorting that happens as nodes are selected.
The compare function for stable sort had different requirements than
the previous implementation.
This patch adds an integer identifier to nodes that doesn't change when
the node name changes. This identifier can be used by different systems
to reference a node. This may be important to store caches and simulation
states per node, because otherwise those would always be invalidated
when a node name changes.
Additionally, this kind of identifier could make some things more efficient,
because with it an integer is enough to identify a node and one does not
have to store the node name.
I observed a 10% improvement in evaluation time in a file with an extreme
number of simple math nodes, due to reduced logging overhead-- from
0.226s to 0.205s.
Differential Revision: https://developer.blender.org/D15775
Fix debug assert opening File Browser on Windows platform.
See D16672 for more details.
Differential Revision: https://developer.blender.org/D16672
Reviewed by Julian Eisel
To make GPU backends other than OpenGL work. Adds required pixel buffer and
fence objects to GPU module.
Authored by Apple: Michael Parkin-White
Ref T96261
Ref T92212
Reviewed By: fclem, brecht
Differential Revision: https://developer.blender.org/D16042
Use recently introduced BKE_fcurve_merge_duplicate_keys (that was moved
from the transform system to BKE) to merge keyframes on the same frame
after snapping (same as what would happen with the transform system).
This makes behavior consistent and prevents a state after snapping that
cannot be reproduced in any other way.
NOTE: same probably has to be done for greasepencil, but that is for
another commit.
This exposes the fcurve cleanup from transform system to other callers
in anticipation to use it in the snapping operators.
It has been renamed from `posttrans_fcurve_clean` to
`BKE_fcurve_merge_duplicate_keys` to better describe what it does.
No functional change expected.
Ref. T101996
NOTE: same probably has to be done for greasepencil, but that is for
another commit.
Maniphest Tasks: T101996
Differential Revision: https://developer.blender.org/D16663
This just replaces the combined usage of OB_MODE_PAINT_GPENCIL
OB_MODE_SCULPT_GPENCIL
OB_MODE_WEIGHT_GPENCIL
OB_MODE_VERTEX_GPENCIL.
Differential Revision: https://developer.blender.org/D16652
Introduced in fc7beac8d6, but I think this never worked because the
`asset_library_ref` of the temporary file-list used for reading in a
background thread is nulled. Now there's a different pointer that we can
use that works properly.
Two things here:
- fix ghash lookup from rB4d497721ecd1
-- this was looking in the wrong map (causing an assert on file load)
- set MovieTrackingObject active_plane_track to NULL upon deletion (same
as for regular tracks)
-- rBfe38715600c introduced a crash because `draw_tracking_tracks` would
still get an active plane track (logic for getting these changed)
Maniphest Tasks: T102887
Differential Revision: https://developer.blender.org/D16660
a5e7657cee missed this call where clamped slicing is necessary.
The subdivision of a segment purposefully modifies the handle types of
the other side of the following control point, but that didn't work for
the final cyclic segment.
The code I wrote to group triangles or multires quads that
belonging to single faces into single PBVH nodes had edge
cases that failed. The code is now much simpler and simply
assigns groups of primitives to nodes.
When entering paint modes the paint pivot was cleared,
which broken rotate around pivot. Fixed for all paint modes.
PBVH modes set the pivot to the PBVH bounding box
while texture paint uses the evaluated mesh bounding box.
If no brush exists the stroke operator
falls through to the grab transform
op in the global view3d keymap.
This now works. It would be nice if
we could get rid of that keymap entry
though and add it manually to the edit/paint
modes that need it.
The code I wrote to group triangles or multires quads that
belonging to single faces into single PBVH nodes had edge
cases that failed. The code is now much simpler and simply
assigns groups of primitives to nodes.
When entering paint modes the paint pivot was cleared,
which broken rotate around pivot. Fixed for all paint modes.
PBVH modes set the pivot to the PBVH bounding box
while texture paint uses the evaluated mesh bounding box.
If no brush exists the stroke operator
falls through to the grab transform
op in the global view3d keymap.
This now works. It would be nice if
we could get rid of that keymap entry
though and add it manually to the edit/paint
modes that need it.
In this case the blocksize may not the one we requested, which was assumed to be
the case. Instead get the effective block size from the compiler as was already
done for Metal and OneAPI.
Unless using WITH_CYCLES_DEBUG.
This is convenient for investigating kernel performance, but too verbose to
always have in the buildbot logs especially now that we are also compiling HIP
and OneAPI kernels.
Materials now have an enum to set the emission sampling method, to be
either None, Auto, Front, Back or Front & Back. This replace the
previous "Multiple Importance Sample" option.
Auto is the new default, and uses a heuristic to estimate the emitted
light intensity to determine of the mesh should be considered as a light
for sampling. Shaders sometimes have a bit of emission but treating them
as a light source is not worth the memory/performance overhead.
The Front/Back settings are not important yet, but will help when a
light tree is added. In that case setting emission to Front only on
closed meshes can help ignore emission from inside the mesh interior that
does not contribute anything.
Includes contributions by Brecht Van Lommel and Alaska.
Ref T77889
* Split light types into own files, move light type specific code from
light tree and MNEE.
* Move flat light distribution code into own kernel file and host side
building function, in preparation of light tree addition. Add light/sample.h
as main entry point to kernel light sampling.
* Better separate calculation of pdf for selecting a light, and pdf for
sampling a point on the light. The selection pdf is now also stored in
LightSampling for MNEE to correctly recalculate the full pdf when the
shading position changes but the point on the light remains fixed.
* Improvement to kernel light storage, using packed_float3, better variable
names, etc.
Includes contributions by Brecht Van Lommel and Weizhen Huang.
Ref T77889
This cache was never written to, only "copied" between sockets in one
case, it dates back at least a decade. It doesn't make sense to store
caches on node trees directly anyway, since they can be used in
multiple places.
No user visible changes expected.
Add a function to query the full path for a file, so that asset files
can get the path via the asset representation and its new asset
identifier. This is designed to be a reliable way to locate an asset,
and using it is yet another step to rely less on the problematic file
browser code.
Also, previous code would build the full path manually in a few places,
which is good to deduplicate anyway.
With the asset identifier introduced in the previous commit, we can now
locate an asset just from its `AssetRepresentation`, without requiring
information from the asset library and the file browser storage. With
this we can remove some hacks and function parameters. A RNA/BPY
function is also affected, but I didn't remove the paramter to keep
compatibility. It's simply ignored and not required anymore, noted this
in the parameter description (noted for T102877).
No user visible changes expected.
`AssetIdentifier` holds information to uniquely identify and locate an
asset. More information:
https://wiki.blender.org/wiki/Source/Architecture/Asset_System/Back_End#Asset_Identifier
For the start this is tied quite a bit to file paths, so that external
assets are assumed to be in the file system.
This is needed to support an "All" asset library (see T102879), which
would contain assets from different locations. Currently the location of
an asset is queried via the file browser backend, which however requires
a common root location. It also moves us further away from the file
browser towards the asset system (see T87235) and allows us to remove
some hacks (see following commit).
No user visible changes expected.
If an asset library is located on disk, store the path to it in the
asset library data. This is called the "root path" now.
With this we can construct an asset identifier, which is introduced in
the following commit.
When reading directories recursively, the code would first only set the
file name as the relative path and then later iterate over the read files
and prepend the recursed into path, to get the complete path relative to
the recursed into directory. This isn't clear and confused me quite a
bit. And it is not compatible with what we need for creating asset
identifiers, which are introduced in the 2nd following commit.
Instead properly determine the complete relative path when initially
adding the file, and don't change it after. The asset identifier can the
be constructed properly at the time needed.
`done` was only used in one place, and `is_updating` was never read.
Generally we should avoid adding this sort of temporary data to longer
lived structs.
When applying the "Bake Action" operator in pose mode
it could throw an error saying "Nothing to Bake"
even though bones are selected
That is because the code was looking for a selected armature
But in Pose Mode, clicking into empty space to de-select would also
deselect the armature.
Then box selecting would not make the armature selected again
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D16593
When applying the "Bake Action" operator in pose mode
it could throw an error saying "Nothing to Bake"
even though bones are selected
That is because the code was looking for a selected armature
But in Pose Mode, clicking into empty space to de-select would also
deselect the armature.
Then box selecting would not make the armature selected again
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D16593
rB133dde41bb5b changed handling of (in)directly linked status handling
for IDs, now IDs that are not directly linked get proper status and
handling on file save. this broke parts of the `pyapi_idprop_datablock`
tests.
This commit essentially ensures before writing .blend file that only
actualy locally used linked IDs are tagged as `LIB_TAG_EXTERN` (and
therefore get a reference stored in the .blend file).
Previously, a linked ID tagged as directly linked would never get back
to the indirectly linked status. Consequence was a lot of 'needless'
references to linked data in .blend files.
This commit also introduces a new flag for lib_query ID usage types,
`IDWALK_CB_DIRECT_WEAK_LINK`, used currently for base's Object
pointer, and for LayerCollection's Collection pointer.
NOTE: A side-effect of this patch is that even IDs explicitely linked by
the user won't be kept anymore when writing files, i.e. they will not be
there anymore after a file reload, if they are not actually used.
Overhead of new process is below 0.1% in whole file saving process in
a Heist production file e.g.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D16605
Retrieve and load the vertices selected/hidden state in pos_nor extraction.
Reviewed By: fclem
Maniphest Tasks: T102519
Differential Revision: https://developer.blender.org/D16594
This is usability improvement, rather than bugfix. By default, height of
VSE timeline is clamped to 7 channels, unless more are added. But adding
new strip is not intuitive, since user can't scroll up due to clamping.
Clamp timeline height to n+1 used channels, so there is always 1 free
channel visible.
`BPYGPU_IS_INIT_OR_ERROR_OBJ` is not implemented in all pygpu functions.
Instead of copying and pasting that call across the API when it has no
gpu context, override the methods with one that always reports error.
Using 32 does not make much sense, because there will be 4 remaining
padding bytes in the struct anyway. Using 64 instead does not actually
increase the size of the struct, but makes allocations less likely.
With stereoscopy enabled, sseq->multiview_eye is set to left and
right eye during drawing, but this value is not reset, even if
stereoscopy is disabled.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D16639
`OldNewMap` used to have its own map implementation. Given that
the file uses C++ now, it is easy to use a C++ map implementation
instead. This simplifies the code a lot.
Going forward it might make sense to remove the `OldNewMap`
abstraction or to split it up in two (currently, `NewAddress.nr` has
two different meanings in different contexts which is confusing).
No functional changes are expected.
Differential Revision: https://developer.blender.org/D16546
Before, the frame was not created, but now if there is
a previous stroke and teh frame changed, the new keyframe
is created.
This is related to T102623
In `Orphan Data` (or `Blender File`) view, the ID pointer of the
actions's parent tree-element wasn't actually pointing to an ID, but to
the list-base containing the IDs.
Early out (with a warning) if the object or object-data to unlink the
action from is not clear.
Caused by rBb4a2096415d9.
Similar to rBe772087ed664.
Maniphest Tasks: T102797
Differential Revision: https://developer.blender.org/D16635
Before rBa8a454287a27, edge creases were copied to the result mesh as
part of `MEdge`. Now they are stored in a separate `CD_CREASE` layer,
which I mistakenly disabled for interpolation. However, to maintain
the geometry node uses a field input, remove the interpolated attribute
there.
Caused by a8a454287a which assumed it was possible
to access the raw data of the edge creases layer. Also allow
processing vertex creases even if there aren't any edge creases.
**Empty Slot Fix**
Currently the boolean modifier transfers the default material from
meshes with no materials and empty material slots to the faces on the
base mesh. I added this in a2d59b2dac for the sake of consistency,
but the behavior is actually not useful at all. The default empty
material isn't chosen by users, it just signifies "nothing," so when
it replaces a material chosen by users, it feels like a bug.
This commit corrects that behavior by only transferring materials from
non-empty material slots. The implementation is now consistent between
exact mode of the boolean modifier and the geometry node.
**Index-Based Option**
"Index-based" is the new default material method for the boolean
modifier, to access the old behavior from before the breaking commit.
a2d59b2dac actually broke some Boolean workflows fundamentally, since
it was important to set up matching slot indices on each operand. That
isn't the cleanest workflow, and it breaks when materials change
procedurally, but historically that hasn't been a problem. The
"transfer" behavior transfers all materials except for empty slots,
but the fundamental problem is that there isn't a good way to specify
the result materials besides using the slot indices.
Even then, the transfer option is a bit more intuitive and useful for
some simpler situations, and it allows accessing the behavior that has
been in 3.2 and 3.3 for a long time, so it's also left in as an option.
The geometry node doesn't get this new option, in the hope that we'll
find a better solution in the future.
Differential Revision: https://developer.blender.org/D16187
**Empty Slot Fix**
Currently the boolean modifier transfers the default material from
meshes with no materials and empty material slots to the faces on the
base mesh. I added this in a2d59b2dac for the sake of consistency,
but the behavior is actually not useful at all. The default empty
material isn't chosen by users, it just signifies "nothing," so when
it replaces a material chosen by users, it feels like a bug.
This commit corrects that behavior by only transferring materials from
non-empty material slots. The implementation is now consistent between
exact mode of the boolean modifier and the geometry node.
**Index-Based Option**
"Index-based" is the new default material method for the boolean
modifier, to access the old behavior from before the breaking commit.
a2d59b2dac actually broke some Boolean workflows fundamentally, since
it was important to set up matching slot indices on each operand. That
isn't the cleanest workflow, and it breaks when materials change
procedurally, but historically that hasn't been a problem. The
"transfer" behavior transfers all materials except for empty slots,
but the fundamental problem is that there isn't a good way to specify
the result materials besides using the slot indices.
Even then, the transfer option is a bit more intuitive and useful for
some simpler situations, and it allows accessing the behavior that has
been in 3.2 and 3.3 for a long time, so it's also left in as an option.
The geometry node doesn't get this new option, in the hope that we'll
find a better solution in the future.
Differential Revision: https://developer.blender.org/D16187
Actually, the interpolation can be done only between keyframes different of breakdown type,
but in some cases, this is not convenient.
Now, a new option is displayed to allow the interpolation using breakdown keyframes
as interpolation extremes.
Reviewed By: mendio, pepeland
Differential Revision: https://developer.blender.org/D16515
Makes code safer, easier to understand, and less verbose. I detected
negligible performance differences, only a slight improvement for the
normalize step where the function call overhead was probably more
of a bottleneck.
I kept `memset` instead of `.fill(float3(0))` because that gave
better performance in my tests. In the future that stage could be
parallelized, or we could make sure new arrays are allocated with
`calloc`.
Meta strip position relies on strips within. When meta strip is empty,
update function, that would normally update it's position returns early
and this causes translaton to behave erratically.
When strip is empty, treat it as normal strip and move its start frame
as with other strip types.
This patch makes the Bake Actions operator fills the Start Frame & End From with that of the Preview Range if "Use Preview Range" is enabled.
{F13973619}
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D16630
Use `ED_view3d_win_to_3d` to unproject the first click coords.
This is the same function used in other tools like Draw Curve.
Differential revision: https://developer.blender.org/D16617
The node transferred position once as a generic attribute, and then set
the values again manually. This wastes processing during the attribute
transfer step. On a 1 million face grid, I observed roughly an 8%
improvement, from 231.5 to 217.1 ms average and 225.4 to 209.6 ms min.
It's helpful to have these topology maps standardized and organized
a bit better so they can be optimized and considered for future caching
together. Also use a more standard name for the map for that purpose.
Fix a performance regression from 05952aa94d by storing pointers
to mesh arrays locally in the subdiv foreach context. In a simple test
of a 1 million face grid, this improved performance by 5% (from 0.31
to 0.295 seconds).
A utility function retrieved mesh arrays for every element after
05952aa94d which can be easily avoided. This was used when
building the GPU indices for sculpt mode drawing. In my tests this
saves 0.1ms per PBVH node. There may be very slight improvements
in line art and shrinkwrap as well.
The issue was that geometry nodes was not reevaluated after changing the
content of the collection. That resulted in the other object still having a
reference to the deleted object, which resulted in a crash when it tried to
access it.
Adding the `ID_RECALC_GEOMETRY` tag indicates that the content of the
collection has changed and will trigger geometry nodes setups that depend
on the collection to update.
{F13294314}
# Process
In the pixel extraction process a larger domain will be extracted then the input mesh.
The borders of uv islands are extended with connected geometry of the input mesh.
The extended mesh is then fed into the pixel extraction process.
A mask is used to limit the extraction so UV islands will not overlap.
Input UV islands.
{F13206401}
Extended UV Island (only one showing).
{F13288764}
This patch doesn't include fixing uv seams at non-manifold edges (like suzannes eyes) as that
would require a different approach (edge extending or pixel copy-ing). The later has already been
implemented in D14702, but should be revisited to only use do the non-manifold edge fixing.
This patch supports fixing UV seams across UDIM textures.
There might be an issue when using a single texture on multiple uv maps.
Reviewed By: brecht, joeedh, JulienKaspar
Maniphest Tasks: T97352
Differential Revision: https://developer.blender.org/D14970
Add support for `pin_unselected` in new UV Packing API.
Regression introduced by API change in rBe3075f3cf7ce.
Duplicate change to rB0ce18561bc82 in master.
This new inheritance behavior is more beneficial for the metal Backend.
Also change the default depth write behavior of shaders to be unchanged.
This makes fragment shader depth amendment more explicit.
This also add the missing depth_write for metal kernels.
When accessing certain structure fields from Python, they return
mathutils types instead of generic arrays (this is based on subtype).
This exposes this information in the Python API documentation.
Differential Revision: https://developer.blender.org/D16626
Issue was caused by imprecise math due to using float numbers.
Use double instead.
No negative performance impact was observed.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D16517
Meta strip range was adjusted in versioning because of previous issues
by function `version_fix_seq_meta_range`. After `speed_factor` property
was added, this changed how function works and result was incorrect
function due to uninitialized property value.
Running `version_fix_seq_meta_range` after `seq_speed_factor_set` fixes
this issue.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D16606
Overlay relationship lines were missing between the object having the
modifier and the target object.
To make this consistent with other objects types, now draw relationship
lines for greasepencil and hooks now, too.
Spotted while looking into T102741.
Maniphest Tasks: T102741
Differential Revision: https://developer.blender.org/D16609
Brush cursors were missing when opening a file saved in sculpt/vertex-/
weightpaint mode.
Since we dont do a full modeswitch on file load in `ED_editors_init` for
grease pencil since rBde994d6b7b1c, we were missing the brush cursor
toggling [`ED_gpencil_toggle_brush_cursor`] normally done in
`ED_gpencil_setup_modes`.
This is now explicitly added for any greasepencil paintmode (in case
object is active).
Maniphest Tasks: T102685
Differential Revision: https://developer.blender.org/D16603
These comments were from rBcc7460eaa491 / rBde994d6b7b1c /
rB7037ff920447 but ended up in a confusing state.
Moved into the right places and reworded appropriately.
Spotted while looking into T102685.
Maniphest Tasks: T102685
Differential Revision: https://developer.blender.org/D16601
Caused by {rBbf8507414889}
Above comit set the wrong cursors (WM_CURSOR_DEFAULT).
When releasing MMB, we need to return to WM_CURSOR_PAINT_BRUSH.
When exiting, we need to return to WM_CURSOR_DOT (since this is the
default cursor for the tool, see `_defs_gpencil_paint` >
`generate_from_brushes`)
Maniphest Tasks: T102650
Differential Revision: https://developer.blender.org/D16591
When in greasepencil sculpt-/vertexpaint mode and using selection
masking, picking points wasnt working correctly.
So regular gpencil.select (without modifier keys) was not enabled for the
keymap. This only really makes sense for RCS (right click select) atm
(and not using RC fallback tools - which I dont think are present in
these modes anyways). With RCS, this can be supported and afaict, this
does not cause conflicts.
NOTE: prior to D16576, one could use the ALT modifier key (this
combination was actually in the keymap) -- but it should select the
entire stroke, which is handled in D16576.
Differential Revision: https://developer.blender.org/D16577
Caused by rB85f90ed6fd88.
Above commit made sure whole strokes are selected when the
GP_SELECTMODE_STROKE is used in different modes, but ignored the fact
that this can also already be set by the entire_strokes select operator
property.
This is now corrected.
Differential Revision: https://developer.blender.org/D16576
As described in T101948, this commit changes socket name to be more
consistent with other nodes that generate instances output.
Differential Revision: https://developer.blender.org/D16394
Change name to make navigation easier for beginner users. This should
more clearly hint at the use of this node to change the full geometry,
and not work with fields, and makes the name more consistent.
Differential Revision: https://developer.blender.org/D16396
While implementing T102289, I noticed that this node has
several solutions that are different from other, newer nodes.
- Explicitly set default values
- Use references
- Reduce the size of the node settings structure
Differential Revision: https://developer.blender.org/D16548
Instead of creating a new mesh from scratch, modify an existing mesh.
This allows us to keep derived caches for triangulation and bounds
alive more easily, and allows keeping materials and non-generic
attributes like vertex groups alive on the mesh.
It also has other performance benefits, since face and face corner
attributes aren't affected at all, and because of reduced overhead
from not allocating a new mesh.
Updating edge attributes is a bit more complicated now, since we
have to completely replace the arrays but keep the existing attribute
IDs around. The new mesh update tag is also slightly too specific IMO.
But I think both of those things will improve in the future because
of existing plans for further refactoring these areas:
- New attribute storage that gives pointer stability
- Further use and granularity of mesh update tagging that will
make the correct API more clear
Fixes T102711
Differential Revision: https://developer.blender.org/D16615
Add a script for a very simple object evaluation benchmark.
There could be more advanced ways of measuring the time
per-node or per modifier, but this just loads the file, tags
the active object for a reevaluation, and times how long
that takes.
Differential Revision: https://developer.blender.org/D16604
The main goal here is to move towards more self contained node
definitions. Previously, one would have to change `blenkernel` to
add a new node which is not necessary anymore. There is no need
for all these register functions to "leak out" of the nodes module.
Differential Revision: https://developer.blender.org/D16612
First time reporting? See [tips](https://wiki.blender.org/wiki/Process/Bug_Reports).
* Use **Help > Report a Bug** in Blender to fill system information and exact Blender version.
* Test [daily builds](https://builder.blender.org/) to verify if the issue is already fixed.
* Test [previous versions](https://download.blender.org/release/) to find an older working version.
* For feature requests, feedback, questions or build issues, see [communication channels](https://wiki.blender.org/wiki/Communication/Contact#User_Feedback_and_Requests).
* If there are multiple bugs, make multiple bug reports.
- type:textarea
id:body
attributes:
label:"Description"
hide_label:true
value:|
**System Information**
Operating system:
Graphics card:
**Blender Version**
Broken: (example: 2.80, edbf15d3c044, master, 2018-11-28, as found on the splash screen)
Worked: (newest version of Blender that worked as expected)
**Short description of error**
**Exact steps for others to reproduce the error**
Based on the default startup or an attached .blend file (as simple as possible).
- type:markdown
attributes:
value:|
### Help the developers
Bug fixing is important, the developers will handle reports swiftly. For that reason, carefully provide exact steps and a **small and simple .blend file** to reproduce the problem. You do your half of the work, then we do our half!
Guides to [contributing code](https://wiki.blender.org/index.php/Dev:Doc/Process/Contributing_Code) and effective [code review](https://wiki.blender.org/index.php/Dev:Doc/Tools/Code_Review).
By submitting code here, you agree that the code is (compatible with) GNU GPL v2 or later.
option(WITH_CYCLES_ONEAPI_BINARIES"Enable Ahead-Of-Time compilation for Cycles oneAPI device"OFF)
option(WITH_CYCLES_ONEAPI_HOST_TASK_EXECUTION"Switch target of oneAPI implementation from SYCL devices to Host Task (single thread on CPU). This option is only for debugging purposes."OFF)
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
