`9c14039a8f4b5f` broke blenlib tests in release builds, due to how
`EXPECT_BLI_ASSERT` works (in release builds it just calls the given
function, so if that crashes then the test fails).
For now remove that check in the test.
Remove the use of a separate contiguous positions array now that
they are stored that way in the first place. This allows removing the
complexity of tracking whether it is allocated and deformed in the
mesh modifier stack.
Instead of deferring the creation of the final mesh until after the
positions have been copied and deformed, create the final mesh
first and then deform its positions.
Since vertex and face normals are calculated lazily, we can rely on
individual modifiers to calculate them as necessary and simplify
the modifier stack. This was hard to change before because of the
separate array of deformed positions.
Differential Revision: https://developer.blender.org/D16971
When activating a rotation with the Transform gizmo for example, some
gizmos are hidden but they don't reappear when changing the mode.
Make sure the gizmos corresponding to the mode always reappear.
This patch optimises subsurface intersection queries on MetalRT. Currently intersect_local traverses from the scene root, retrospectively discarding all non-local hits. Using a lookup of bottom level acceleration structures, we can explicitly query only the relevant instance. On M1 Max, with MetalRT selected, this can give a render speedup of 15-20% for scenes like Monster which make heavy use of subsurface scattering.
Patch authored by Marco Giordano.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D17153
`em_setup_vivewcontext` cannot be used in this function now as it
expects `obedit` to be a mesh. It also duplicated the viewcontext init.
Instead `BKE_editmesh_from_object` is called only when type is a mesh.
Existing `BKE_main_namemap_destroy` is too specific when a entire Main
needs to have its namemaps cleared, since it would not handle the
Library ones.
While in regular situation current code is fine, ID management code that
may also edit linked data needs a wider, simpler clearing tool.
Current `BKE_id_remapper_add` would not replace an already existing
mapping rule, now `BKE_id_remapper_add_overwrite` allows that behavior
if necessary.
If identity pairs (i.e. old ID pointer being same as new one) was
forbidden, then this should be asserted against in code defining
remapping, not in code applying it.
But it is actually sometimes usefull to allow/use identity pairs, so
simply early-return on these instead of asserting.
The goal is to give technical artists the ability to optimize modifier usage
and/or geometry node groups for performance. In the long term, it
would be useful if Blender could provide its own UI to display profiling
information to users. However, right now, there are too many open
design questions making it infeasible to tackle this in the short term.
This commit uses a simpler approach: Instead of adding new ui for
profiling data, it exposes the execution-time of modifiers in the Python
API. This allows technical artists to access the information and to build
their own UI to display the relevant information. In the long term this
will hopefully also help us to integrate a native ui for this in Blender
by observing how users use this information.
Note: The execution time of a modifier highly depends on what other
things the CPU is doing at the same time. For example, in many more
complex files, many objects and therefore modifiers are evaluated at
the same time by multiple threads which makes the measurement
much less reliable. For best results, make sure that only one object
is evaluated at a time (e.g. by changing it in isolation) and that no
other process on the system keeps the CPU busy.
As shown below, the execution time has to be accessed on the
evaluated object, not the original object.
```lang=python
import bpy
depsgraph = bpy.context.view_layer.depsgraph
ob = bpy.context.active_object
ob_eval = ob.evaluated_get(depsgraph)
modifier_eval = ob_eval.modifiers[0]
print(modifier_eval.execution_time, "s")
```
Differential Revision: https://developer.blender.org/D17185
The `SNAP_FORCED` setting is set to the operation and not the snap
status.
Therefore, this option should not be cleared along with the other
statuses when resetting snapping.
Move then the location of this setting to `TransInfo::modifiers`.
BGL deprecation calls used to be reported on each use. As bgl calls
are typically part of a handler that is triggered at refresh this
could lead to overflow of messages and slowing down systems when
the terminal/console had to be refreshed as well.
This patch only reports the first 100 bgl deprecation calls. This
gives enough feedback to the developer that changes needs to be made
. But still provides good responsiveness to users when they have
such add-on enabled. Only the first frames can have a slowdown.
This patch adds two new kernels: SORT_BUCKET_PASS and SORT_WRITE_PASS. These replace PREFIX_SUM and SORTED_PATHS_ARRAY on supported devices (currently implemented on Metal, but will be trivial to enable on the other backends). The new kernels exploit sort partitioning (see D15331) by sorting each partition separately using local atomics. This can give an overall render speedup of 2-3% depending on architecture. As before, we fall back to the original non-partitioned sorting when the shader count is "too high".
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D16909
This patch removes the option to select both AMD and Intel GPUs on system that have both. Currently both devices will be selected by default which results in crashes and other poorly understood behaviour. This patch adds precedence for using any discrete AMD GPU over an integrated Intel one. This can be overridden with CYCLES_METAL_FORCE_INTEL.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D17166
This patch fixes T103393 by undefining `__LIGHT_TREE__` on Metal/AMD as it has an unexpected & major impact on performance even when light trees are not in use.
Patch authored by Prakash Kamliya.
Reviewed By: brecht
Maniphest Tasks: T103393
Differential Revision: https://developer.blender.org/D17167
The merge down operator was sometimes copying the wrong frame, which altered the animation.
While merging the layers, it is sometimes needed to duplicate a keyframe,
when the lowest layer does not have a keyframe but the highest layer does.
Instead of duplicating the previous keyframe of the lowest layer, the code
was actually duplicating the active frame of the layer which was the current frame in the timeline.
This patch fixes the issue by setting the previous keyframe of the layer as its active frame before duplication.
Related issue: T104371.
Differential Revision: https://developer.blender.org/D17214
Mutex locks for manipulating GHOST_System::m_timerManager from
GHOST_SystemWayland relied on WAYLAND being the only user of the
timer-manager.
This isn't the case as timers are fired from
`GHOST_System::dispatchEvents`.
Resolve by using a separate timer-manager for wayland key-repeat timers.
Resolve a thread safety issue reported by valgrind's helgrind checker,
although I wasn't able to redo the error in practice.
NULL check on the key-repeat timer also needs to lock, otherwise it's
possible the timer is set in another thread before the lock is acquired.
Now all key-repeat timer access which may run from a thread
locks the timer mutex before any checks or timer manipulation.
There were two errors with the function used to convert face sets
to the legacy mesh format for keeping forward compatibility:
- It was moved before `CustomData_blend_write_prepare` so it
operated on an empty span.
- It modified the mesh when it's only supposed to change the copy
of the layers written to the file.
Differential Revision: https://developer.blender.org/D17210
This implements two optimizations:
* If the duplication count is constant, the offsets array can be
filled directly in parallel.
* Otherwise, extracting the counts from the virtual array is parallelized.
But there is still a serial loop over all elements in the end to compute
the offsets.
In the unlikely case an area could not be created OPERATOR_CANCELLED
was returned, this has the same value of WM_HANDLER_HANDLED however
break is logical in this situation and both flags work.
If GetFileAttributesW returns an error, only debug assert if the reason
is file not found.
See D17204 for more details.
Differential Revision: https://developer.blender.org/D17204
Reviewed by Ray Molenkamp
Allow preview region to change cursor as per the selected tool
Reviewed by: campbellbarton, ISS
Differential Revision: https://developer.blender.org/D16878
This makes the code more readable.
In this commit also the `int curr_side_unclamp` member was moved to
`EdgeSlideParams` as it is a common value for all "Containers".
There was an inconsistency between geometry sample nodes and mesh/curve
sample nodes, where the latter didn't have a special "Sample" category,
and we categorized as "Operations", which they were not. Also put the
sample category between "Read" and "Write" since the verb name is
more consistent and sampling is an advanced form of reading.
In some cases panels without headers were drawn too wide in sidebars
with region overlap.
Instead of always using the maximum width the view allows, headerless
panels now also use the width calculated in
`panel_draw_width_from_max_width_get`. The function already returns the
correct width in all cases and also takes care of insetting the panels,
when their backdrop needs to be drawn, which is necessary for headerless
panels, too, when there is region overlap.
Reviewed By: Hans Goudey
Differential Revision: http://developer.blender.org/D17194
This is both a cleanup and a preparation for the Principled v2 changes.
Notable changes:
- Clearcoat weight is now folded into the closure weight, there's no reason
to track this separately.
- There's a general-purpose helper for computing a Closure's albedo, which is
currently used by the denoising albedo and diffuse/gloss/transmission color
passes.
- The d/g/t color passes didn't account for closure albedo before, this means
that e.g. metallic shaders with Principled v2 now have their color texture
included in the glossy color pass. Also fixes T104041 (sheen albedo).
- Instead of precomputing and storing the albedo during shader setup, compute
it when needed. This is technically redundant since we still need to compute
it on shader setup to adjust the sample weight, but the operation is cheap
enough that freeing up the storage seems worth it.
- Future changes (Principled v2) are easier to integrate since the Fresnel
handling isn't all over the place anymore.
- Fresnel handling in the Multiscattering GGX code is still ugly, but since
removing that entirely is the next step, putting effort into cleaning it up
doesn't seem worth it.
- Apart from the d/g/t color passes, no changes to render results are expected.
Differential Revision: https://developer.blender.org/D17101
Useful for validating changes when sampling/noise changes:
- First run with BLENDER_TEST_UPDATE=1 and e.g. CYCLESTEST_SPP_MULTIPLIER=32
- Apply your change
- Run with only CYCLESTEST_SPP_MULTIPLIER=32
- Compare
- Reset the SVN repo
Differential Revision: https://developer.blender.org/D17107
Cycles ignores the size of spot lights, therefore the illuminated area doesn't match the gizmo. This patch resolves this discrepancy.
| Before (Cycles) | After (Cycles) | Eevee
|{F14200605}|{F14200595}|{F14200600}|
This is done by scaling the ray direction by the size of the cone. The implementation of `spot_light_attenuation()` in `spot.h` matches `spot_attenuation()` in `lights_lib.glsl`.
**Test file**:
{F14200728}
Differential Revision: https://developer.blender.org/D17129
Own mistake in d204830107.
For some buttons the type is changed after construction, which means the button
has to be reconstructed. For example number buttons can be turned into number
slider buttons this way. New code was unintentionally overriding the button
type after reconstruction with the old type again.
Use the `SharedCache` concept introduced in D16204 to share lazily
calculated evaluated data between original and multiple evaluated
curves data-blocks. Combined with D14139, this should basically remove
most costs associated with copying large curves data-blocks (though
they add slightly higher constant overhead). The caches should
interact well with undo steps, limiting recalculations on undo/redo.
Options for avoiding the new overhead associated with the shared
caches are described in T104327 and can be addressed separately.
Simple situations affected by this change are using any of the following data
on an evaluated curves data-block without first invalidating it:
- Evaluated offsets (size of evaluated curves)
- Evaluated positions
- Evaluated tangents
- Evaluated normals
- Evaluated lengths (spline parameter node)
- Internal Bezier and NURBS caches
In a test with 4m points and 170k curves, using curve normals in a
procedural setup that didn't change positions procedurally gave 5x
faster playback speeds. Avoiding recalculating the offsets on every
update saved about 3 ms for every sculpt update for brushes that don't
change topology.
Differential Revision: https://developer.blender.org/D17134
This will add a proper modal keymap for the node link drag operator.
It allows the user to customize the keys used to start drag and so on.
Also it gets rid of the custom status bar message.
Differential Revision: https://developer.blender.org/D17190
No user-visible changes expected.
Essentially, this makes it possible to use C++ types like `std::function`
inside `uiBut`. This has plenty of benefits, for example this should help
significantly reducing unsafe `void *` use (since a `std::function` can hold
arbitrary data while preserving types).
----
I wanted to use a non-trivially-constructible C++ type (`std::function`) inside
`uiBut`. But this would mean we can't use `MEM_cnew()` like allocation anymore.
Rather than writing worse code, allow non-trivial construction for `uiBut`.
Member-initializing all members is annoying since there are so many, but rather
safe than sorry. As we use more C++ types (e.g. convert callbacks to use
`std::function`), this should become less since they initialize properly on
default construction.
Also use proper C++ inheritance for `uiBut` subtypes, the old way to allocate
based on size isn't working anymore.
Differential Revision: https://developer.blender.org/D17164
Reviewed by: Hans Goudey
Currently this conversion (which happens when using modifiers in edit
mode, for example) is completely single threaded. It's harder than some
other areas to multithread because BMesh elements don't always know
their indices (and vise versa), and because the dynamic AoS format
used by BMesh makes some typical solutions not helpful.
This patch proposes to split the operation into two steps. The first
updates the indices of BMesh elements and builds tables for easy
iteration later. It also checks if some optional mesh attributes
should be added. The second uses parallel loops over all elements,
copying attribute values and building the Mesh topology.
Both steps process different domains in separate threads (though the
first has to combine faces and loops). Though this isn't proper data
parallelism, it's quite helpful because each domain doesn't affect the
others.
**Timings**
I tested this on a Ryzen 7950x with a 1 million face grid, with no
extra attributes and then with several color attributes and vertex
groups.
| File | Before | After |
| Simple | 101.6 ms | 59.6 ms |
| More Attributes | 149.2 ms | 65.6 ms |
The optimization scales better with more attributes on the BMesh. The
speedup isn't as linear as multithreading other operations, indicating
added overhead. I think this is worth it though, because the user is
usually actively interacting with a mesh in edit mode.
See the differential revision for more timing information.
Differential Revision: https://developer.blender.org/D16249
Whenever a transform operation is activated by gizmo, the gizmo
modal is maintained, but its drawing remains the same even if the
transform mode or constrain is changed.
So update the gizmo according to the mode or constrain set.
NOTE: Currently only 3D view gizmo is affected
The operator has the option to add to selected FCurves instead
of only the active, but it was only exposed in the redo panel.
This patch adds the operator to the right-click menu on FCurve channels,
and to the channel menu in the Graph editor.
Both times with configured to add to selected
instead of only the active FCurve
Revied by Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D17066
Ref: D17066
Implements T103858: in OBJ importer and exporter, and in Collada
exporter, present axis choices as a dropdown instead of inline button
row.
Reviewed By: Bastien Montagne
Differential Revision: https://developer.blender.org/D17186
- Replace type annotations with doc-strings, the current conventions is
not to use type annotations in startup scripts.
- Replace abbreviation "idx" with "index" in public arguments/properties.
- Replace `len(..) > 0` with boolean checks.
- Add `__all__` to list public members.
- Use `arg` instead of `param` for doc-strings.
- Locate the doc-string so it shows as `__doc__`.
The recursion depth was checked for equality with a maximum depth,
allowing leaves with more primitives if a certain depth was reached.
However, a single leaf must always use the same material (including
set_smooth), so if a leaf contained multiple materials it was split
anyway. This meant that in the next recursion step the depth was
larger than the cutoff value and it would go back to recursing until
the number of primitives was small enough, ignoring the recursion
depth for the rest of the process.
In certain edge cases this could lead to a stack overflow.
Even with the check changed from 'equality' to 'larger or equal'
this could still fail in the pathological case where every primitive
has another material. But that can't be helped, and it wouldn't
realistically happen either.
Differential Revsision: https://developer.blender.org/D17188
Straightforward port. I took the oportunity to remove some C vector
functions (ex: `copy_v2_v2`).
This makes some changes to DRWView to accomodate the alignement
requirements of the float4x4 type.
This declaration change tells the evaluation system that the radius
field is evaluated on the input geometry. Which in turn means that
attributes referenced by the radius field should be propagated to
the geometry.
After Win32 API call GetFileAttributesW, check for
INVALID_FILE_ATTRIBUTES, which is returned on error,
usually if file not found.
See D17176 for more details.
Differential Revision: https://developer.blender.org/D17176
Reviewed by Ray Molenkamp
The declaration of group nodes using unavailable linked groups contains
a `skip_updating_sockets` tag, which indicates that the node shouldn't
change. This information was not used properly further down the line.
Versioning code in `do_versions_after_linking_260` inserted new group input
and output nodes. And (reasonably?) expected sockets to exist on those nodes.
However, `nodeAddStaticNode` did not initialize sockets on nodes with that use
`declare_dynamic` yet. This patch changes it so that `declare_dynamic` is used
in more places, which caused issues during file loading when node groups are
updated in somewhat arbitrary order (not in an order that is based on which
groups use which).
Differential Revision: https://developer.blender.org/D17183
Adds two operators to select linked vertices in weight paint mode.
Similar to how it works in edit mode.
Press "L" to select vertices under the cursor,
or CTRL + "L" to select anything linked to the current selection.
Reviewed by: Sybren A. Stüvel, Hans Goudey, Marion Stalke
Differential Revision: https://developer.blender.org/D16848
Ref: D16848
`ED_GIZMO_CAGE2D_STYLE_CIRCLE` now draw circles. The previous `ED_GIZMO_CAGE2D_STYLE_CIRCLE`, which drew rectangles, is renamed to `ED_GIZMO_CAGE2D_STYLE_RECTANGLE`. The meaning of `ED_GIZMO_CAGE2D_STYLE_BOX` is now unclear and probably needs to be renamed too.
Ref T104280
Maniphest Tasks: T104280
Differential Revision: https://developer.blender.org/D17174
Remove some assumptions that an FCurve with a single keyframe always is
extrapolated in constant fashion. There's no reason for the Beziér handles
to be ignored in such a case.
FCurve evaluation already worked properly, it was just the drawing in the
graph editor and the selectability of the handles that needed adjustments.
Test case is a smaller step towards supporting Vulkan. Other
test cases rely on SSBOs as well so it is better to first satisfy
this step before handling the others.
Even though the dope sheet respects the pinned channels, it did not show the icon to interact with the pinned state.
This adds the icon to the dope sheet as well.
{F14178715}
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D17061
Ref: D17061
n versioning, when converting CD_SCULPT_FACE_SETS to CD_PROP_INT32
the layers were not kept properly ordered by type.
This was discovered while investigating T104053
Differential Revision: D17165
Previously, having the "Encoding speed" set to "slowest" would choose
libaom-av1 first and librav1e second. This change makes Blender choose
librav1e first (and has a fallback to whatever other AV1 codec is
available if librav1e is not installed).
Addresses /T103849 on systems where librav1e codec available.
Reviewed By: sergey, ISS
Maniphest Tasks: T103849
Differential Revision: https://developer.blender.org/D17002
In the previous situation the message was shown for Apple devices.
But this is not correct and confusing.
- Apple with Metal backend are supported, OpenGL on Apple isn't
- Legacy devices on Windows or Linux are also not supported.
This change will check that the capabilities of the GPU match the
requirements to use Viewport compositor. Based on those capabilities
a message is shown and the panel is activated.
In File Browser, correct full path creation so that it works correctly
in recursive listings.
See D17175 for more details.
Differential Revision: https://developer.blender.org/D17175
Reviewed by Julian Eisel
Blender crashes when Simplify is enabled and set to 0.
This is because mesh_to_volume_grid returns nullptr at voxel size 0.
A simple null-check fixes this problem.
Differential Revision: https://developer.blender.org/D17122
`WM_modalkeymap_items_to_string` is expected to always return a string.
But in the special case of zero length, the returned string was not
terminated with `'\0'`.
This can cause problems with the header of the knife tool for example.
It always uses the returned string.
(This issue was observed when investigating T103804).
This reverts commit 11a9578a19.
Reverting this because there was a miscommunication between Simon and me. Shortly
before I committed the change, Simon noticed that there are cases when "Hide Value"
is checked to hide the value in a group node, but we still want to show the value
in the modifier.
Normals falloff mask is created inverted compared
to how other falloffs work. It's now un-inverted
in a final step at the end.
Also exposed the normals falloff smooth steps as
an RNA property.
When the "Hide Value" option of a group input is enabled, only its name
is displayed in group nodes. Modifiers should have the same behavior.
However, for modifiers, only showing the name does not make sense
when the user can't edit the value. Therefore the value is not shown at all.
The image manager used to handle OSL textures on the GPU by
default loads images after displacement is evaluated. This is a
problem when the displacement shader uses any textures, hence
why the geometry manager already makes the image manager
load any images used in the displacement shader graph early
(`GeometryManager::device_update_displacement_images`).
This only handled Cycles image nodes however, not OSL nodes, so
if any `texture` calls were made in OSL those would be missed and
therefore crash when accessed on the GPU. Unfortunately it is not
simple to determine which textures referenced by OSL are needed
for displacement, so the solution for now is to simply load all of
them early if true displacement is used.
This patch also fixes the result of the displacement shader not
being used properly in OptiX.
Maniphest Tasks: T104240
Differential Revision: https://developer.blender.org/D17162
Was using squared cosine instead of cosine. The problem is obvious for large spread angles.
|before|after
|{F14220946}|{F14220948}
The images are generating by returning `floor(spotmask)` in function `spot_attenuation()` in `lights_lib.glsl`.
Thoses are added for better component masking syntax.
This avoids the harder to read `float2(my_vec4)`.
This is not meant to be fully usable swizzling support but could be
extended in the future.
Straightforward port. I took the oportunity to remove some C vector
functions (ex: `copy_v2_v2()`).
Reviewed By: antoniov
Differential Revision: https://developer.blender.org/D17160
Reduces the GLSL to MSL translation stage of shader compilation from 120 ms to 5 ms for complex EEVEE materials. This manifests in faster overall compilations, and faster cache hits for secondary compilations, as the MSL variant is needed as a key.
Startup time is also improved for both first-run and second-run. Note that this change does not affect shader compilation times within the Metal API.
Also disables shader output to disk
Authored by Apple: Michael Parkin-White
Ref T96261
Depends on D16990
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D17033
Replace texelFetch calls with a texture point-sample rather than a textureRead call. This increases texture cache utilisation when mixing between sampled calls and reads. Bounds checking can also be removed from these functions, reducing instruction count and branch divergence, as the sampler routine handles range clamping.
Authored by Apple: Michael Parkin-White
Ref T96261
Depends on D16923
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D17021
Test results were generated from incorrect code.
Code was fixed, but test results weren't updated.
This patch updates the test results to match the implementation.
- `projection_perspective.w.w == 0.0`
Also minor changes in comments:
- Reference BLENDER_HISTORY_FILE instead of the literal file-name
(simplifies looking up usage).
- Use usernames in tags, as noted in code-style.
Authored by Sonny Campbell.
Currently when importing a USD file, some of the camera properties are
ignored, or the units are not converted correctly from USD world units.
On import we currently set the focal length, but not the camera sensor
size (horizontal and vertical aperture), so the camera field of view
is wrong. The sensor size information is in the USD file, but is ignored
for perspective cameras.
USD uses "tenth of a world unit" scale for some physical camera properties
like focal length and aperture.
https://graphics.pixar.com/usd/release/api/class_usd_geom_camera.html#UsdGeom_CameraUnits
I have added the UsdStage's metersPerUnit parameter to the ImportSettings
so the camera can do the required conversion on import. This will convert from
the USD file's world units to millimeters for Blender's camera settings.
Reviewed by: Sybren and makowalski.
Differential Revision: https://developer.blender.org/D16019
The `MultiDevice` implementation of `get_cpu_osl_memory` returns a
nullptr when there is no CPU device in the mix. As such access to that
crashed in `update_osl_globals`. But that only updates maps that are not
currently used on the GPU anyway, so can just skip that when the CPU
is not used for rendering.
Maniphest Tasks: T104216
The glsl files + create infos of shaders that are only used
during development where still being compiled into blender.
This isn't needed and shouldn't be included. This change will
only include them when WITH_GTEST and WITH_OPENGL_DRAW_TESTS are
enabled. All other cases those files will be skipped.
Resolve an issue where released buffers were returned to the reusable memory pool before GPU work associated with these buffers had been encoded. Usually release of memory pools is dependent on successful completion of GPU work via command buffer callbacks. However, if the pool refresh operation occurs between encoding of work and submission, buffer ref-count is prematurely decremented.
Patch also ensures safe buffer free lists are only flushed once a set number of buffers have been used. This reduces overhead of small and frequent flushes, without raising the memory ceiling significantly.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D17118
Compute test case still used legacy API to construct
GLSL shaders. This change will migrate it to use the
GPUShaderCreateInfo's.
In preparation to run test-cases against non-opengl
back-ends.
Due to shader global scope emulation via class interface, global constant arrays in shaders are allocated in per-thread shader local memory. To reduce memory pressure, placing these constant arrays inside function scope will ensure they only reside within device constant memory. This results in a tangible 1.5-2x performance uplift for the specific shaders affected.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D17089
Paths to vulkan libraries, paths and related components were
hardcoded in the platform cmake file. This patch separates
this by using adding CMake modules for Vulkan and ShaderC.
This change has only been applied to the macOs configuration as
that is currently our main platform for development. Other platforms
will be added during the development of the Vulkan back-end.
Metal backend does not support primtiive restart for point primtiives. Hence strip_restart_indices removes restart indices by swapping them to the end of the index buffer and reducing the length.
An edge-case existed where all indices within the index buffer were restarts and no valid swap-index would be found, resulting in a buffer underflow.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D17088
This patch adds support for compilation and execution of GLSL compute shaders. This, along with a few systematic changes and fixes, enable realtime compositor functionality with the Metal backend on macOS. A number of GLSL source modifications have been made to add the required level of type explicitness, allowing all compilations to succeed.
GLSL Compute shader compilation follows a similar path to Vertex/Fragment translation, with added support for shader atomics, shared memory blocks and barriers.
Texture flags have also been updated to ensure correct read/write specification for textures used within the compositor pipeline. GPU command submission changes have also been made in the high level path, when Metal is used, to address command buffer time-outs caused by certain expensive compute shaders.
Authored by Apple: Michael Parkin-White
Ref T96261
Ref T99210
Reviewed By: fclem
Maniphest Tasks: T99210, T96261
Differential Revision: https://developer.blender.org/D16990
Recent changes in our GLSL libraries didn't compile on Vulkan. This
change reverts a compile directive that was removed, but required
in order to compile using the Vulkan backend.
Extract:
- EEVEE: Compiling Shaders (the same message exists in EEVEE Next, but
it uses string concatenation and I don't know yet how to deal with
those--see T92758)
Disambiguate:
- Pan (audio, camera)
- Box (TextSequence)
- Mix (noun in constraints, GP materials)
- Volume (object type, file system)
- Floor (math integer part, 3D viewport horizontal plane)
- Impossible to disambiguate the constraint name because
bConstraintTypeInfo doesn't have a context field.
- Show Overlay (in the sequence editor, use the same message as other
editors to avoid a confusion with the Frame Overlay feature, also
called "Show Overlay")
Additionally, fix a few issues reported by Joan Pujolar (@jpujolar)
in T101830.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D17114
When moving or linking an object to a collection, the report was not
properly translatable. In French for instance, it would give
nonsensical half-translated sentences such as "<Object> moved vers
<collection>", instead of "<Object> déplacé vers <collection>".
Instead, separate the report into the four possible translations (one
or multiple objects, linking or moving). This is very verbose and less
legible, but it ensure the sentences can be properly translated,
including plurals in languages which use grammatical agreement.
In addition, use BKE_collection_ui_name_get() to get the collection
name, because the Scene Collection's name is hardcoded, but it can be
localized.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D17112
This operator updates scene strip internal length to reflect target
scene length. Previously scene strip had to be deleted and added from
scratch. Scene strip length in timeline will not be changed.
The code removed here was intended to be an optimization that
avoids creating an additional node to join multiple attribute sets.
However, that optimization did not work, because it did not take
into account whether the single attribute set is required or not.
Allow to explicitly swap node links by pressing the alt-key while
reconnecting node links. This replaces the old auto-swapping based on
matching prefixes in socket names.
The new behavior works as follows:
* By default plugging links into already occupied (single input)
sockets will connect the dragged link and remove the existing one.
* Pressing the alt-key while dragging an existing node link from one
socket to another socket that is already connected will swap the
links' destinations.
* Pressing the alt-key while dragging a new node link into an already
linked socket will try to reconnect the existing links into another
socket of the same type and remove the links, if no matching socket
is found on the node. This is similar to the old auto-swapping.
Swapping links from or to multi input sockets is not supported.
This commit also makes the link drag tooltip better visible, when using
light themes by using the text theme color.
Reviewed By: Hans Goudey, Simon Thommes
Differential Revision: https://developer.blender.org/D16244
Most operations where strips are duplicated use `SEQ_animation` API,
which handles keyframe animation. Now drivers are handled as well.
When group of strips is duplicated and driver references other strip,
it will still reference original strip. However, this is much better,
than previous behavior, when strip duplication results in "transfer" of
driver from original strip to duplicated one.
Fixes T104141
Simplify `BM_uv_element_map_create` by using `BM_face_calc_area_uv_signed`.
Remove unused UV winding code in `BM_uv_vert_map_create`.
Fixes unlikely memory leak in `BKE_mesh_uv_vert_map_create`.
No functional changes.
Differential Revision: https://developer.blender.org/D17137
This adds a new operator: bpy.ops.mesh.flip_quad_tessellation()
This operator rotates the internal loops of the selected quads, allowing
the user to control tessellation without destructively altering the
mesh.
{F14201995}
This operator can be found in the "Face" menu (Ctrl+F) under "Face
Data".
{F14201997}
Reviewed By: campbellbarton, dbystedt
Differential Revision: https://developer.blender.org/D17056
Some miscellaneous cleanups left over from a fix/cleanup combo:
- Use const variables
- Use the C++ `math` namespace functions
- Use `std::array` for arrays with size known at compile time
- Use `MutableSpan` instead of reference to array
Differential Revision: https://developer.blender.org/D17094
In the node groups for T103730, the "Points of Curve" node is often used to
retrieve the root point of every curve. Since the curve point offsets array
already contains that data directly, we can detect this as a special case and
avoid all the other work.
Differential Revision: https://developer.blender.org/D17128
MoltenVK wasn't found as it was previous part of lib/vulkan.
as lib/vulkan now doesn't contain
the full sdk, we will use a moltenvk folder.
At this moment the moltenvk folder isn't filled, but will eventually be.
These changes were authored by Michael B Johnson (drwave).
The default Blender USD export currently produces files that trigger
errors in the usdchecker that ships with USD 22.11.
The changes are:
- Set the defaultPrim if no defaultPrim is set. This sets it to the
first prim in the hierarchy which matches the behaviour of Pixar's
referencing (where referencing a USD layer without a defaultPrim will
pick the first prim) as well as matches the logic in Pixar's Maya USD
exporter code.
- Applies the MaterialBindingAPI to prims with material binding
attributes. This is a relatively new requirement for USD as it will
help for efficiency with upcoming changes to Hydra.
- Removes the preview scope in the USD shader hierarchy, because it
is no longer valid for shaders to have any non-container ancestors in
their hierarchy up until the enclosing Material prim.
Reviewed by: Michael Kowalski
Differential Revision: https://developer.blender.org/D17041
Removing all OSL script nodes from the shader graph would cause that
graph to no longer report it using `KERNEL_FEATURE_SHADER_RAYTRACE`
via `ShaderManager::get_graph_kernel_features`, but the shader object
itself still would have the `has_surface_raytrace` field set.
This caused kernels to be reloaded without shader raytracing support, but
later the `DEVICE_KERNEL_INTEGRATOR_SHADE_SURFACE_RAYTRACE`
kernel would still be invoked since the shader continued to report it
requiring that through the `SD_HAS_RAYTRACE` flag set because of
`has_surface_raytrace`.
Fix that by ensuring `has_surface_raytrace` is reset on every shader update,
so that when all OSL script nodes are deleted it is set to false, and only
stays true when there are still OSL script nodes (or other nodes using it).
Maniphest Tasks: T104157
Differential Revision: https://developer.blender.org/D17140
BKE blendfile should not be allowed to deal with DNA deprectaed data, so
move recent check in rB138b3815e528 into BLO readfile, in a new
`blo_read_file_checks` util that is being called at the very end of main
readfile code (`blo_read_file_internal` and `library_link_end`).
rB7f564d74f9ed (6 years ago!) forgot to clear the deprecated
`Window->screen` pointer on file read for recent-enough .blend files.
This is required since a valid value is always written in .blend files
for that pointer, to ensure backward compatibility.
The issue was never detected so far because that pointer is explicitely
reset to NULL after filewrite, which includes any memfile undostep
write, and usually existing UI data is re-used instead of loading the
one from the .blend file, so thedden assert in `blo_lib_link_restore`
would never be triggered.
Now moved the assert at the end of `setup_app_data` to ensure it always
get checked.
This patch adds a draw_ui_list() function, which is a wrapper around
layout.template_list(). It implements generic add/remove/move buttons,
passing the correct "row" integer to template_list(), as well as a
drop-down menu, if provided, making it a complete solution for
consistent UILists for addons.
Differential Revision: https://developer.blender.org/D14119
The node does not support blurring booleans, but that was not handled
property in link drag search.
Differential Revision: https://developer.blender.org/D17139
Only the area where the source buffer will be drawn on the destination buffer
will be evaluated. This will improve performance in sequencer and image editors as
less calcuations needs to happen.
Micro improvement to store delta uv per subsample. This reduces
branching that might happen on the CPU, but also makes it possible
to add other sub-sampling filters as well.
No changes for the end-user.
Adds new options to UV Face selection in the UV Editor, with UV > Select > Select Similar
In multi object edit mode, "Similar Object" selects faces which have the same object.
"Similar Winding" will select faces which have the same winding, i.e. are they
facing upwards or downwards.
Resolves: T103975
Differential Revision: https://developer.blender.org/D17125
Change the 2D Gizmo drawing function to provide a usable transform matrix,
if it would otherwise be degenerate.
Differential Revision: https://developer.blender.org/D17113
If an object has a geometry nodes modifier, the UVs on that object might change
in response to any change on any other object.
Now we will redraw the UV editor on any object change, not just the active object.
Differential Revision: https://developer.blender.org/D17124
Based on T99607:
- Existing Angle Control shortcuts are removed
- Voxel, Dyntopo and Hair resolution shortcuts are remapped to `R`
Since voxel remeshing is not compatible with dyntopo, each can use the shortcut `R` for the remeshing resolution without causing a conflict.
The shortcut `R` is not currently used for anything important.
The angle control menu is commonly not used.
And sculpt mode is only coincidentally inheriting the rotate operator shortcut on `R` because nothing else is mapped to the key.
Reviewed By: Julien Kaspar and Hans Goudey and Joseph Eagar
Differential Revision: https://developer.blender.org/D16511
Ref D16511
This addressed feature request T99811.
Added the following features to fully support importing USDZ archives:
- Added .usdz to the list of supported extensions.
- Added new USD import options to copy textures from USDZ archives. The
textures may be imported as packed data (the default) or to a directory
on disk.
- Extended the USD material import logic to handle package-relative texture
assets paths by invoking the USD asset resolver to copy the textures from
the USDZ archive to a directory on disk. When importing in Packed mode,
the textures are first saved to Blender's temporary session directory
prior to packing.
The new USD import options are
- Import Textures: Behavior when importing textures from a USDZ archive
- Textures Directory: Path to the directory where imported textures will
be copied
- File Name Collision: Behavior when the name of an imported texture file
conflicts with an existing file
Import Textures menu options:
- None: Don't import textures
- Packed: Import textures as packed data (the default)
- Copy: Copy files to Textures Directory
File Name Collision menu options:
- Use Existing: If a file with the same name already exists, use that
instead of copying (the default)
- Overwrite: Overwrite existing files
Reviewed by: Bastien
Differential Revision: https://developer.blender.org/D17074
In 7536abbe16 changes make possible to input field as Count field.
But changes of declaration probably was forgotten. So now this input
can take field and node will be work. But input link was red. This
patch resolves this issue.
Differential Revision: https://developer.blender.org/D17131
When the sort weights are a single value, they have no effect,
so sorting the relevant indices for the element will be wasted work.
The sorting is expensive compared to the rest of the node. In my
simple test of the points of curve node, it became 6 times faster
when the weights are a single value.
On some occasions, as in cases where transform operations are triggered
via gizmos, the constrain orientations that can be toggled with
multiple clicks of X, Y or Z were repeated.
There is no use in maintaining repeated orientations.
Image Transform use linear or nearest sampling during editing and exporting.
This gets sampling is fine for images that aren't scaled. When sequencing
however you mostly want use some sort of scaling, that leads to poorer
quality.
This change will use sub-sampling to improve the quality. This is only
enabled when rendering. During editing the subsampling is disabled to
keep the user interface reacting as expected.
Another improvement is that image transform is stopped at the moment
it hadn't sampled at least 4 samples for a scan line. In that case we
expect that there are no further samples that would change to result.
In a future patch this could be replaced by a ray/bounding bo intersection
as that would remove some unneeded loops in both the single sampled and
sub sampled approach.
Add an `object.modifiers.move()` method, similar to the one
for constraints and some other collections. Currently reordering
modifiers requires using operators, which depend on context.
The implementation is straightforward, except for the need to
make the severity of errors reported by the underlying editor
code into a parameter, so that the new Python API function
reports any problems as Python exceptions, and refactoring
the code to allow aborting a blocked move before making any
changes. I also turn the negative index condition from an assert
into an error.
Differential Revision: https://developer.blender.org/D16966
The list was populated from the base (unevaluated) object, but now that
Geometry nodes can generate various layers this is impractical..
Differential Revision: https://developer.blender.org/D17093
The clear functions for grease pencil data/frame/layer
was not followed by immediate update in the viewport.
Some notifiers were missing in the rna definition of these functions,
which are added in by this patch.
Reviewed By: Antonio Vazquez
Differential Revision: https://developer.blender.org/D17120
Only one point should be used to create a reference rotation for other
points to follow. Using two caused the resulting twist to be
asymmetric, especially noticeable on symmetrical, cyclic curves.
An update to [0] which broke curve_to_mesh & deform_modifiers tests,
now this change only applies to cyclic curves as the final result was
much greater for non-cyclic curves because of a difference between how
end-point directions are calculated (see code-comments for details).
Alternate fix to D11886 which caused T101843.
[0]: 36a82314a0.
Regression in [0] which cleared the redo-panel if an operator added
its own undo step. This worked for sculpt to fix T101743, but caused
the redo-panel to be cleared for actions who's undo steps where created
by nested operators (which is the case for the spin operator).
Fix by checking an undo-step is added without registering an operator.
[0]: f68e50a263
Various new CI tests for USD Import / Export functionalty:
Import:
- Added mesh import tests for topology types and multiple UV sets. (Python)
Export:
- Added a verification tests for mesh topology. (C++)
- Added a test to make sure UsdPreviewSurface export conversion of materials
is correct. (C++)
Reviewed by: Sybren and Hans.
Differential Revision: https://developer.blender.org/D16274
This reverts commit 36a82314a0.
as it has broken tests for the last day and a half, it likely just
needs a test file update, but we can't keep this failing longer
than it already has.
A mistake in the node type descriptions gave the node a description for
the reverse curve node.
Differential Revision: https://developer.blender.org/D17111
Added a new Import All Materials USD import option. When this
option is enabled, USD materials not used by any geometry will
be included in the import. Imported materials with no users
will have a fake user assigned.
Maniphest Tasks: T97195
Differential Revision: https://developer.blender.org/D16172
This commit fixes T100674, Renamed the "axis" label under viewport display
panel to "axes" in object properties.
Differential Revision: https://developer.blender.org/D16650
We should always have an active vertexgroup (making sure this is the
case was just not happening on the greasepencil side).
Now do this (similar to what is done for other object types in
`object_defgroup_remove_common`).
Maniphest Tasks: T104089
Differential Revision: https://developer.blender.org/D17091
User site-packages were disabled unless `--python-use-system-env`
argument was given. This was done to prevent Blender's Python
unintentionally using modules that happened to be installed locally,
however it meant so pip installing modules from Blender would fail to
load those modules (for some users).
Enable user site-packages since it's needed for installing additional
packages via pip, see code-comments for details.
Resolves T104000.
- Don't call exit() when memory allocation fails, while unlikely
internal failures should not be exiting the application.
- Don't print a message when the directory is empty as it's
unnecessarily noisy.
- Print errors the the stderr & include the reason for opendir failing.
When constructing run-time paths native slashes are preferred as WIN32
doesn't have full support for forward slashes in paths.
It can also cause problems when performing exact matches on paths
which are normalized, where normalizing one of the paths makes
comparisons fail.
Using the system native slash would have avoided T103385.
Originally, function `sequencer_generic_invoke_xy_guess_channel`
looked in what channel the last strip of the same type is and the
channel used for new strip placement. This was changed as a workaround
when sound strips were added below movie strips
(58bea005c5).
Now these workarounds aren't necessary, but the function was left
unchanged.
Current logic is for adding movie strip to channel 1 is:
- Sound is added to channel 1
- Video is added to channel 2
- If there is only video, it is added to channel 1
Since movie may, or may not contain sound, it is not possible to align
added strips in a way that was done before, unless timeline is analyzed
more in detail, but this would be quite inefficient.
Also, note, that the code did not work, if strip is added next to
previous one, so it mostly did not work as intended.
This commit changes:
- Fix alignment not working when strip is added right next to previous
strip
- Assume that movie strips have sound strip underneath it, so channel
below last movie strip is picked
- For other strip types, pick channel of the last strip of same type
Ultimately, the code is still rather weak, and better system, like using
channel where strip was manually moved, or concept of "typed channels"
would improve this feature.
There is not much documentation on the "snap_point" property, but by
code it is possible to note that it serves to set a target snap point
and is of internal use as it is hidden from the Redo panel.
However, this property was still very dependent on Tools settings and
if set to an operator's call, it changes the scene configurations
inadequately.
Therefore,
- remove this dependency from UI for rotation and resize operators,
- do not change the state of the snap in the scene and
- cleanup the code.
Some transform modes are changeable, so callbacks should be reset
together.
Currently the unchanged `transform_matrix` callback is not a major
issue as it is only used for gizmos and gizmos stop updating when
changing the operator type.
Use a Vector<std::string> , instead of a Set<std::string> as a Set does
not keep the same order when iterating over it.
Differential Revision: https://developer.blender.org/D17103
In many cases when reading undo memfile, n the 'restore id from old
main' part of the process, the 'id_old' is not set, which means that
the call to `BKE_main_idmap_insert_id` would try to dereference a `nullptr`.
In practice this is likely not an issue (see comment in code for details),
but at least explicitely check for a nullptr `id_old` pointer.
Would deffer actual cleanup of this area for after 3.5 is branched out.
Currently only affects 'UI' IDs (WindowManager, Screen, etc.), but in
the future other types may be affected as well.
NOTE: this is only used in readfile code itself, not in the
post-processing performed by `setup_app_data`, as this code is too
specific for such generic handling.
Based on "Sampling the GGX Distribution of Visible Normals" by Eric Heitz
(https://jcgt.org/published/0007/04/01/).
Also, this removes the lambdaI computation from the Beckmann sampling code and
just recomputes it below. We already need to recompute for two other cases
(GGX and clearcoat), so this makes the code more consistent.
In terms of performance, I don't expect a notable impact since the earlier
computation also was non-trivial, and while it probably was slightly more
accurate, I'd argue that being consistent between evaluation and sampling is
more important than absolute numerical accuracy anyways.
Differential Revision: https://developer.blender.org/D17100
This gives closer results to what I've seen in papers and other renderers when
using the code to precompute albedo later (to replace MultiGGX).
It's usually a tiny difference, the only case where I've seen it matter is
in the `shader/node_group_float.blend` test - but that's a (single-scatter) GGX
closure with 0.9 roughness, so it's not too surprising. In any case, the new
result looks closer to Eevee, so that's good I guess.
Differential Revision: https://developer.blender.org/D17099
Simon mentioned that this gets in the way more than it helps. No geometry
sockets currently show up in the modifier panel. People may build node groups
that have multiple geometry inputs that can be used when the group is used
as node instead of as modifier.
In the future we could also allow e.g. choosing an object to pass into a geometry
socket. That has the problem that we'd also have to duplicate other functionality
of the Object Info node (original vs. relative space).
There were two issues:
* The `new_point_counts_per_curve` was one too large, resulting in
`interpolate_from_neighbors` reading invalid memory.
* Writing the counts into the existing offsets array didn't quite work
because there can be a collision at the offset right between the
last old curve and the first new point. There was a race condition
where this value could be read and written at the same time.
When some path property was displayed in the File Browser, clicking the
icon to open a file browser dialog to choose a file/directory would
show an error. While this makes sense when you are already in a file
browser dialog (we don't support such nested file browser dialogs),
allow it when the file browser is opened as a normal editor, not as a
dialog.
Current implementation had some faulty assumtions and had some work
arounds for crashes that were actually limitation of the implementation.
The main reason for this was that the implementation didn't add new
primitives in the same direction it was already adding. Some when
incorrect behavior was detected it was assumed that the part wasn't
manifold (anymore) and didn't fix that part of the mesh.
The new implementation will extract a solution and use this solution
also as the order to generate primitives in uv space.
This patch fixes several crashes and improves the overall quality
when fixing seam bleeding. It also adds additional debug tools
(print_debug) implementation in order to find issues faster in the
future.
Regression in [0] caused by a change where path joining would
replace a forward slash with a back-slash when joining paths WIN32.
Now the directory is always used as a prefix for the paths returned
by BLI_filelist_dir_contents which resolves the regression.
[0]: 9f6a045e23
`remember_deformed_curve_positions_if_necessary` has to be called before
topology changing operations on curves. Otherwise the crazy-space data
is invalid.
The help circles to fill areas were rotated with the object rotation,
but as the stroke is part of the object, apply the rot matrix again
produced a double rotation, so it can be removed.
Two properties are now exposed in python API :
time of each point, and inittime of each stroke.
Reviewed by: Antonio Vazquez
Differential Revision: https://developer.blender.org/D17104
Speckles and missing lights were experienced in scenes with Nishita Sky
Texture and a Sun Size smaller than 1.5°, such as in Lone Monk and Attic
scenes.
Increasing the precision of cosf fixes it.
Only one point should be used to create a reference rotation for other
points to follow. Using two caused the resulting twist to be
asymmetric, especially noticeable on symmetrical, cyclic curves.
Alternate fix to D11886 which caused T101843.
After object-mode undo (memfile undo), the value wan't lost, but the
property would be temporarily converted back to integer type in order
to be forward compatible. Now only use the forward compatible
writing when writing undo steps. Auto-saves and similar files are
currently not forward compatible anyway.
Make the functions more flexible and more generic by changing the curves
arguments to the curve offsets. This way, theoretically they could become
normal utility functions in the future. Also do a consistency pass over
the algorithms that generate new curves geometry for naming and
code ordering, and use of utility functions. The functions are really
quite similar, and it's much easier to tell this way.
The most time-consuming operation in merge by distance is to find
duplicate faces (faces that are different but have the same vertices).
Therefore, some strategies were planned to optimize this algorithm:
- Store the corner indices in an array thus avoiding multiple calls of `weld_iter_loop_of_poly_next`;
- Create a map of polygons linked to edges instead of linked to vertices - this decreases the number of connections and reduces the calculation of the intersection of polygon indices.
There are other fields to optimize, like reusing the `wpolys` array
instead of creating a new array of corner offsets. And join some arrays
as members of the same struct to be used in the same buffer.
But for now, it is already a nice optimization. And the new
`poly_find_doubles` function can be reused in the future to create a
generic utility.
The result of the optimization varies greatly depending on the number
of polygons, the size of each polygon and the number of duplicates.
On average it was something around 2 times faster.
Worst case tested (old vs new): 0.1ms vs 0.3ms
Best case tested (old vs new): 10.0ms vs 3.2ms
Differential Revision: https://developer.blender.org/D17071
`PBVH_Leaf` nodes are now split into a new `PBVH_TexLeaf`
node type when using the paint brush. These nodes are
split by image pixels, not triangles. This greatly
increases performance when working with large
textures on low-poly meshes.
Reviewed By: Jeroen Bakker
Differential Revision: https://developer.blender.org/D14900
Ref: D14900
A noticeable (>5%) performance regression in oneAPI backend came with
a501a2dbff. Updating to latest graphics
compiler from driver 101.4032 fixes it.
I've tested it with current min-supported drivers and it runs well but
since compatibility of graphics compiler with older drivers isn't
guaranteed, I'm also bumping the min-supported driver versions.
If end-users consider latest drivers too fresh to switch to (version
isn't released as stable on Linux as of today but should be before
Blender 3.5 release), CYCLES_ONEAPI_ALL_DEVICES=1 env variable can be
used.
Intel Graphics Compiler on Linux will be updated in a later commit
so we can then close D16984.
Reviewed By: sergey, LazyDodo
The problem was that the stroke array was not reset for
each iteration of the loop, so the second time around,
the array was not initialized correctly and
was left with a NaN value.
The USD Preview Surface material import feature is now considered
stable, so this patch removes this option from the Experimental
category in the UI.
The Import USD Preview option is now enabled by default.
The Experimental box has been removed.
A new Materials box has been added to group the Import
USD Preview Surface, Set Material Blend and Material
Collision Mode options.
Reviewed by: Sybren
Differential Revision: https://developer.blender.org/D17053
Rewrite of the Workbench engine using C++ and the new Draw Manager API.
The new engine can be enabled in Blender `Preferences > Experimental > Workbench Next`.
After that, the engine can be selected in `Properties > Scene > Render Engine`.
When `Workbench Next` is the active engine, it also handles the `Solid` viewport mode rendering.
The rewrite aims to be functionally equivalent to the current Workbench engine, but it also includes some small fixes/tweaks:
- `In Front` rendered objects now work correctly with DoF and Shadows.
- The `Sampling > Viewport` setting is actually used when the viewport is in `Render Mode`.
- In `Texture` mode, textured materials also use the material properties. (Previously, only non textured materials would)
To do:
- Sculpt PBVH.
- Volume rendering.
- Hair rendering.
- Use the "no_geom" shader versions for shadow rendering.
- Decide the final API for custom visibility culling (Needed for shadows).
- Profile/optimize.
Known Issues:
- Matcaps are not loaded until they’re shown elsewhere. (e.g. when opening the `Viewort Shading` UI)
- Outlines are drawn between different materials of the same object. (Each material submesh has its own object handle)
Reviewed By: fclem
Maniphest Tasks: T101619
Differential Revision: https://developer.blender.org/D16826
Improve handling for cases where maximum in-flight command buffer count is exceeded. This can occur during light-baking operations. Ensures the application handles this gracefully and also improves workload pipelining by situationally stalling until GPU work has completed, if too much work is queued up.
This may have a tangible benefit for T103742 by ensuring Blender does not queue up too much GPU work.
Authored by Apple: Michael Parkin-White
Ref T96261
Ref T103742
Depends on D17018
Reviewed By: fclem
Maniphest Tasks: T103742, T96261
Differential Revision: https://developer.blender.org/D17019
Required by Metal backend to have correct usage flags for textures which are read by host.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D17020
Affecting render output preview when tone mapping is used, and EEVEE scenes such as Mr Elephant rendering in pink due to missing shaders.
Authored by Apple: Michael Parkin-White
Ref T103635
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T103635, T96261
Differential Revision: https://developer.blender.org/D16923
AMD GPUs do not appear to produce consistent results with other GPUs when using textureGather in the Metal backend. Disabling for now to ensure correct function of outline rendering.
This may require an additional sub-pixel offset in the texture sampling calls, to achieve correct behaviour.
Authored by Apple: Michael Parkin-White
Ref T103412
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T103412, T96261
Differential Revision: https://developer.blender.org/D16934
This patch fixes an issue where Blender 3.5 alpha with the Metal GPU backend enabled on Japanese macOS fails to compile shaders and crashes on startup.
In a Japanese environment, `defaultCStringEncoding` is the legacy MacJapanese encoding, and it erroneously converts backslashes (0x5c) to Yen symbols (¥).
Therefore, Metal shader compile fails with the following log and Blender crashes.
```
2022-12-29 13:50:10.200 Blender[13404:246707] Compile Error - Metal Shader Library (Stage: 0), error Error Domain=MTLLibraryErrorDomain Code=3 "program_source:225:74: error: non-ASCII characters are not allowed outside of literals and identifiers
template<typename T, access A = access::sample> struct STRUCT_NAME { ¥
^
program_source:226:14: error: no template named 'TEX_TYPE'
thread TEX_TYPE<T, A> *texture; ¥
^
program_source:226:39: error: non-ASCII characters are not allowed outside of literals and identifiers
thread TEX_TYPE<T, A> *texture; ¥
^
program_source:227:29: error: non-ASCII characters are not allowed outside of literals and identifiers
thread sampler *samp; ¥
^
...
```
We can use `stringWithUTF8String` instead.
Reviewed By: fclem, MichaelPW
Differential Revision: https://developer.blender.org/D16881
In the new Draw Manager, when the same DrawGroup has both front and back facing instances, the front facing instances don't offset their indices accordingly.
Differential Revision: https://developer.blender.org/D17069
This changes `make update` to download the assets repository automatically
if it does not exist already. If it does exist, it is updated. Precompiled libraries
have the same behavior. This is required for T103620.
`pipeline_config.yaml` is updated as well for the builtbot.
Differential Revision: https://developer.blender.org/D17090
The call to BKE_volume_grid_openvdb_for_write() was accidentally removed
in D15806. This adds it to BKE_volume_grid_transform_matrix_set() to
avoid that it happens again when that function is used.
Differential Revision: D16949
The code in questions comes from Shewchuk's triangle code, which
hasn't been updated to fix the out-of-buffer access problem
that ASAN finds in the delaunay unit test. The problem is benign:
the code would exit the loop before using the value fetched from
beyond the end of the buffer, but to make ASAN happy, I put in
a couple extra tests to not fetch values that aren't going to be used.
There's a compromise of a code parameter called BEVEL_GOOD_ANGLE,
and bugs T44961, T86768, T95335, and this one, are all about problems
with various values of that parameter. If an angle of an adjacent
non-beveled edge is too close to that of the beveled edge, then you
get spikes. The BEVEL_GOOD_ANGLE says that if you are within that
angle difference, then no bevel happens. If the value is too small
then one gets spikes for certain models people build; if the value
is too large, then other people are annoyed that no bevel happens.
Hopefully this compromise in this commit is the final one I will do
before switching to Bevel v2, where none of this should be an issue.
Regression in [0] caused mouse wheel events over windows without focus
to use the modifier state at the point the window was de-activated.
Now un-focused windows have all events release, when focused again
modifier press events are set again.
[0]: 8bc76bf4b9
This can improve performance in some circumstances when there are
vectorized and/or unrolled loops. I especially noticed that this helps
a lot while working on D16970 (got a 10-20% speedup there by avoiding
running into the non-vectorized fallback loop too often).
This isn't correct as window activation is handled separately
from the cursor entering/leaving a window.
This would call de-activate when the cursor moved outside the window
even though the window remained focused.
Rely on focus changes which already handle activate/deactivate events.
Caused by {rB841df831e89d} and {rB3558bb8eae75}.
These commits moved flags from `eLineArtGPencilModifierFlags` to
`eLineartMainFlags`, but later on in code, these were still evaluated
from the modifiers `flags` (instead of `calculation_flags`).
This resulted in a false condition (`match_output` was assumed true but
it wasnt), leading to a wrong codepath taken.
This is now corrected (`calculation_flags` need to be passed around for
this as well).
Maniphest Tasks: T103887
Differential Revision: https://developer.blender.org/D17062
This also fixes the layout of boolean properties with the field toggle
visible. This was discussed in the most recent geometry nodes submodule
meeting.
This uses the changes from ef68a37e5d to create IDProperties
for exposed boolean sockets with a boolean type instead of an integer
with a [0,1] range. Existing properties and values are converted
automatically.
For forward compatibility, the properties are switched to the integer
type for saving. Otherwise older versions crash immediately when opening
a newer file. The "Use Attribute" IDProperties aren't changed here,
since that wouldn't have a visible benefit.
Differential Revision: https://developer.blender.org/D12816
This adds 4 collection properties to MeshUVLoopLayer to eventually replace the (MeshUVLoop) .data property.
The added properties are:
.uv
.vertex_selection
.edge_selection
.pin
The direct access to the separate arrays is much more efficient than the access via MeshUVLoop.
Differential Revision: https://developer.blender.org/D16998
Caused by 05952aa94d, which removed the use of the
active tessface UV pointer on meshes but didn't replace it properly with
the equivalend custom data API function.
This improves performance in cases where the Set Position node is "turned off"
by passing `false` into the selection input.
It's possible that the node still takes some time in this case currently, because
it is destructing the input fields which may reference geometries that need
to be destructed as well. We could potentially change this node (and others)
so that the field inputs are only requested when the selection is not a
constant `false`.
This adds the following operators to edit mode:
- `select_all`
- `select_random`
- `select_end`
Differential Revision: https://developer.blender.org/D17047
This adds an `UndoType` for the `Curves` object, for edit mode.
For now, this will only store the `CurvesGeometry` at every step.
Other properties such as the `selection_domain` or the `surface` object
will have to be dealt with in subsequent commits.
Differential Revision: https://developer.blender.org/D16979
This was not done originally, because one had to iterate over all curves
to get the number of points which had some overhead. Now the number
of points is stored all the time anyway.
The `fix_link_cycles` function added in rB2ffd08e95249df2a068dd did not
handle the case correctly when there are multiple cycles going through
the same socket.
Existing path selection & new path picking included without UV's.
Now limit objects to those with UV's.
Also remove use of CTX_wm_view3d(C) in the UV editor it would be NULL,
but it doesn't makes sense to use the 3D viewport for UV operations
even if it was available.
This adds a new `Interpolate Curves` node. It allows generating new curves
between a set of existing guide curves. This is essential for procedural hair.
Usage:
- One has to provide a set of guide curves and a set of root positions for
the generated curves. New curves are created starting from these root
positions. The N closest guide curves are used for the interpolation.
- An additional up vector can be provided for every guide curve and
root position. This is typically a surface normal or nothing. This allows
generating child curves that are properly oriented based on the
surface orientation.
- Sometimes a point should only be interpolated using a subset of the
guides. This can be achieved using the `Guide Group ID` and
`Point Group ID` inputs. The curve generated at a specific point will
only take the guides with the same id into account. This allows e.g.
for hair parting.
- The `Max Neighbors` input limits how many guide curves are taken
into account for every interpolated curve.
Differential Revision: https://developer.blender.org/D16642
During 3D texturing the uv islands are extended in order to fix seam bleeding
for manifold parts of the input mesh. This patch adds a `print_debug` method
on UVIsland that generates a python script. This script can be copy-past
into the Python Console to show the generated geometry.
This script can be extended to show the extracted border and use face colors
for showing internal decisions.
Swap-buffers was being deferred (to prevent it being called
from the event handling thread) however when it was called the
OpenGL context might not be active (especially with multiple windows).
Moving the cursor between windows made eglSwapBuffers report:
EGL Error (0x300D): EGL_BAD_SURFACE.
Resolve this by removing swapBuffer calls and instead add a
GHOST_kEventWindowUpdateDecor event intended for redrawing
client-side-decoration.
Besides the warning, this results an error with LIBDECOR window frames
not redrawing when a window became inactive.
The name SAFE_AREAS_OT_preset_add lead to "Safe Areas" having it's own
section in the operator API docs. Name CAMERA_OT_safe_areas_preset_add
instead. Keep "safe_areas" as the preset directory for users with
existing presets.
Fixes the packing operators that use ED_uvedit_pack_islands_multi
Also fixes UV Select Similar with hidden UV islands.
Packing operators using GEO_uv_parametrizer should remain unchanged.
Add a check to BM_elem_flag_test(efa, BM_ELEM_HIDDEN).
Note that BM_mesh_calc_face_groups doesn't easily support XOR of flags,
requiring logic to be moved to a preprocess step on BM_ELEM_TAG.
Regression in rBe3075f3cf7ce.
Differential Revision: https://developer.blender.org/D17055
The bpy.types page was unreasonably long (over 17k lines).
Resolve by setting the `maxdepth` for this and the `bpy.ops` page too.
This problem showed up in v3.4 release and may be caused by changes
to Sphinx's default behavior as there doesn't seem to be any change
that would cause this in the generated docs.
Path selection support from [0] didn't account for multiple objects in
edit-mode. Now picking the UV also picks the object to operate on.
[0]: ea5fe7abc1
Add:
- ED_object_in_mode_to_index
- ED_object_in_mode_from_index
Useful for operators that act on a non-active object in multi-edit mode,
so the index can be stored for the operators exec function to read back
the value when redoing an action. Needed to resolve T102680.
Fixes bug where other islands sometimes get their masks cleared (or
filled) in strange circumstances. Still need to figure out the
correct behavior for spherical falloff.
Mesh islands (shells) are now calculated on an as-needed
basis and cached inside of a temp attribute,
`sculpt_topology_island_key`. This attribute is updated
as needed when geometry changes (e.g. the trim brush)
or when mesh visibility changes.
This replaces the old behavior where the "topology" automasking
mode would walk the entire mesh on every stroke.
The background evaluation samples the sky discretely, so if the sun is
too small, it can be missed in the evaluation. To solve this, the sun is
ignored during the background evaluation and its contribution is
computed separately.
Add an RNA API function that gives an array of the normals for every control point.
The normals depend on the `normal_mode` attribute, which can currently be
minumum twist or Z-up, though more options are planned. Normals are currently
evaluated on the evaluated points and then sampled back to the control points.
Because that can be expensive, a normal mode that only does a first evaluation
on control points may be important
The function is intended to be used by Cycles, so it doesn't have to implement
the calculation of normals itself. They can be interpolated between control points
and normalized.
For best performance, the function should only be called once, since it does the
full calculation for every control point every time it is called.
Differential Revision: https://developer.blender.org/D17024
Based on discussion about T102962, rename the "Face Set Boundaries" node
to "Face Group Boundaries" and the Accumulate Field node's "Group Index"
socket to "Group ID". This convention of "__ Group" and "Group ID" will
be used more in other nodes in the future.
This commit doesn't affect forwards or backwards compatibility.
The reverse iteration added in e091291b5b didn't handle
the case where there are no nodes properly. Thanks to Iliya Katueshenock
for investigating this.
While we do need higher level utilities for copying attributes
between geometries, this currently isn't used and it's not clear
that it will be the right abstraction in the end.
The default when there is no cyclic attribute is that none of the curves
are cyclic. In the mesh to curve node, avoid creating the attribute with
just false to save time and memory usage. Also avoid looking up the
attribute twice in the trim node.
When all the curves are poly curves, skip the work of building a
separate array of offsets for the evaluated points (which are the
same as the control points). This saves 1-4ms on every reevaluation
in test files with many curves.
Standardizing the process of creating a new CurvesGeometry with
different curve sizes based on an existing curves is helpful, since
there are a few methods to simplify the process that aren't obvious
at first, like filling the offsets with sizes directly and accumulating
them to become sizes.
Also, in the trim curves node, avoid creating the curve types attribute
all the time. Use the special API functions for the types which do
some optimizations automatically. Also use a more consistent
method to copy the curve domain data, and correct some comments.
The same logic from D17025 is used in other places in the curve code.
This patch uses the class for the evaluated point offsets and the Bezier
control point offsets. This helps to standardize the behavior and make
it easier to read.
Previously the Bezier control point offsets used a slightly different standard
where the first point was the first offset, just so they could have the same
size as the number of points. However two nodes used a helper function
to use the same `OffsetIndices` system, so switch to that there too.
That requires removing the subtraction by one to find the actual offset.
Also add const when accessing data arrays from curves, for consistency.
Differential Revision: https://developer.blender.org/D17038
The lookup table method on CPU and the numerical root finding method on
GPU give quite different results. This commit deletes the Beckmann lookup
table and uses numerical root finding on all devices. For the numerical
root finding, a combined bisection-Newton method with precision control
is used.
Differential Revision: https://developer.blender.org/D17050
Previously, transforming a clip (scaling, repeat, etc) wouldn't re-calculate the blend-in and blend-out values, leading to over / undershoot, and a visual clip artifact
Old:
{F14045003}
This patch adds re-calculation logic (new `BKE_nlastrip_recalculate_blend()` method) to the blend-in/out on transformations to clamp values, and avoid over/under shoot.
The `BKE_nlastrip_recalculate_blend()` encapsulates the existing logic for both the `rna_NlaStrip_blend_in_set()` and `rna_NlaStrip_blend_out_set()` methods into a single BKE method that we an execute as needed. The fact that blend-in is first decreased, is strictly on the order of calculation. My suspicion is that //if// the blend-in / blend-our values were working as intended, the RNA set methods would update in order, and we'd experience the same thing. In short, the choice here was to linearly combine the logic, without making any assumptions of my own.
while talking things over with @sybren and @RiggingDojo, they are fine with how this currently works, but there a desire to update how the two values interact with each (ratio scale, etc) in the future.
New:
{F14045024}
{F14045025}
Reviewed By: sybren
Maniphest Tasks: T101369
Differential Revision: https://developer.blender.org/D16720
This makes it possible to use `texture` and `texture3d` in custom
OSL shaders with a constant image file name as argument on the
GPU, where previously texturing was only possible through Cycles
nodes.
For constant file name arguments, OSL calls
`OSL::RendererServices::get_texture_handle()` with the file name
string to convert it into an opaque handle for use on the GPU.
That is now used to load the respective image file using the Cycles
image manager and generate a SVM handle that can be used on
the GPU. Some care is necessary as the renderer services class is
shared across multiple Cycles instances, whereas the Cycles image
manager is local to each.
Maniphest Tasks: T101222
Differential Revision: https://developer.blender.org/D17032
This patch adds markup to specify that certain kernel data constants should not be specialised. Currently it is used for `tabulated_sobol_sequence_size` and `sobol_index_mask` which change frequently based on the aa sample count, trash the shader cache, and have little bearing on performance.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D16968
This patch adds occupancy tuning for the newly announced high-end M2 machines, giving 10-15% render speedup over a pre-tuned build.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D17037
Split the algorithms that find duplicates.
This improves readability and helps us find areas for optimization.
It may also facilitate the implementation of generic utilities.
No functional changes.
Differential Revision: https://developer.blender.org/D16918
Code authored by Michael B Johnson (drwave).
Reviewed by Sybren and makowalski.
This patch addresses a crash that occurs when exporting a
scene to a USD file, when that scene includes a point cloud
object or hair.
Added OB_POINTCLOUD and OB_CURVES enums and a default case
statement in the switch statement in
USDHierarchyIterator::create_data_writer, to avoid dereferencing
a NULL pointer.
Differential Revision: https://developer.blender.org/D16776
`batch_for_shader` is an utility function that creates the correct
vertex buffer based on the given shader. In the shader interface
the `attr_types_` contains the GPUType for each location in the
vertex buffer.
When using Metal, the `attr_types_` was never updated, resulting
in using incorrect or non-existing data types. This patch fixes
this by updating the `attr_types_` when building the shader
interface.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D17042
When using the "normalized" display of FCurves in the
Graph Editor, and also turning on the preview range,
the normalized display would break.
The preview frame range was assumed to be bezt indices,
which is only true when every frame has a key.
Reviewed by: Colin Basnett
Differential Revision: https://developer.blender.org/D16987
Ref: D16987
Similar to rBe97443478e32 and rBe772087ed664, exit early when
texture, collection and world ID has no parent to unlink from.
Reviewed by: Severin, lichtwerk
Differential Revision: https://developer.blender.org/D17017
The line art modifier added a wmNotifier in it's
GpencilModifierTypeInfo.generateStrokes callback which isn't thread-safe
when called from the depsgraph. This was from the original inclusion
of the feature [0] however a more recent optimization to notifier
lookups [1] made the crash occur more frequently.
Remove the notifier as modifiers should not be adding WM level events
and it works without it.
[0]: 3e87d8a431
[1]: 0aaff9a07d
This was the case when using the operator outside of the modifiers panel.
Caused by {rBeae36be372a6}.
In above commit, `DT_layer_items` shared both `DT_TYPE_MPROPCOL_LOOP` |
`DT_TYPE_MLOOPCOL_LOOP` in a single EnumPropertyItem value "Colors".
This is a bit unusual, but probably allowed.
As a consequence, checks for specific datatypes would fail when selecting
such EnumPropertyItem:
- `DT_DATATYPE_IS_MULTILAYERS` (uses `ELEM` to check distinct entries --
would return false)
- `BKE_object_data_transfer_dttype_to_srcdst_index` (would return
`DT_MULTILAYER_INDEX_INVALID`)
These places have now been corrected to take these "special" values into
account.
Another issue was that multiple EnumPropertyItems with the same value
could be created in dt_add_vcol_layers() if attributes of the same
domain, but different color types are in play (could lead to crashes)
and that has also been corrected.
Also: above commit did not give the choice of transfering color
attributes from the vertex domain (only face corner attributes could be
chosen), this has now been added. DT_layer_vert_items (used from the
modifier) already had this included so this was only an issue when using
the operator outside of the modifiers panel.
Since we now feature two domains, the single "VCOL" in the enum has been
split into "COLOR_VERTEX" and "COLOR_CORNER". This will break existing
scripts calling bpy.ops.object.datalayout_transfer and will be marked as
a breaking change in the release notes.
NOTE: there is another bug here when attributes of the same domain, but
different color types are in play and you want to transfer just a single
specific layer (but that is for a separate commit)
Maniphest Tasks: T103400
Differential Revision: https://developer.blender.org/D16935
Goal of this patch is to stop the invocation of OpenGL calls via the bgl module
on a none OpenGL GPU backend, report this as a python deprecation warning
and report this to the user.
## Deprecation warning to developers
```
>>> import bgl
>>> bgl.glUseProgram(0)
<blender_console>:1: DeprecationWarning: 'bgl.glUseProgram' is deprecated and will be removed in Blender 3.7. Report or update your script to use 'gpu' module.
```
## Deprecation message to users
The message to the user is shown as part of the Info Space and as a message box.
{F14159203 width=100%}
{F14158674 width=100%}
During implementation we tried several ideas:
# Use python warning as errors: This isn't fine grained enough and can show incorrect information to the user.
# Throw deprecation as error and use sys.excepthook to report the user message.
This required a custom exception class to identify the bgl deprecation and a CPython handler function to
be set during python initialization. Although this is the most flexible there was a disconnect between the
exception class, exception function and the excepthook registration.
# A variant how we handle autoexec failures. A flag is stored in Global and when set the user message is reported.
Not that flexible, but code is more connected to the boolean stored in the Global struct.
Although using Global struct isn't nice I chose this solution due to its traceability. It is clear to developers
reading the code how the mechanism works by using search all functionality of your IDE.
Reviewed By: MichaelPW, campbellbarton
Maniphest Tasks: T103863
Differential Revision: https://developer.blender.org/D16996
This makes it convenient to build blender without referencing
pre-compiled libraries which don't always work on newer Linux systems.
Previously I had to rename ../lib while creating the CMakeCache.txt
to ensure my systems libraries would be used.
This change ensures LIBDIR is undefined when WITH_LIBS_PRECOMPILED is
disabled, so any accidental use warns with CMake's `--warn-unused-vars`
argument is given.
These warnings can reveal errors in logic, so quiet them by checking
if the features are enabled before using variables or by assigning
empty strings in some cases.
- Check CMAKE_THREAD_LIBS_INIT is set before use as CMake docs
note that this may be left unset if it's not needed.
- Remove BOOST/OPENVDB/VULKAN references when disable.
- Define INC_SYS even when empty.
- Remove PNG_INC from freetype (not defined anywhere).
The original code used `BLI_polyfill_calc` which can create degenerate
triangles during triangulation per T103913. This causes the subsequent
overlap test to produce incorrect results in certain cases. Change to
using a "beauty" fill instead.
Differential Revision: https://developer.blender.org/D17015
There is a utility method on `CurvesGeometry` to build a map of the
curve for each point. Use that in two more places and make sure its
implementation is multithreaded, which gives a slight speedup
in a simple test file.
When doing partial reloads of asset libraries (only reload assets from
the current file, e.g. after undo re-allocated ID pointers), we'd end up
with assets that don't have their asset data read correctly. It would
execute a branch that didn't set the asset library object necessary to
create and store asset representations.
Steps to reproduce were:
* Open .blend file with geometry node assets in there
* In a geometry node editor, press Shift+A to open the add menu
* Cancel
* Move a node
* Undo
* Press Shift+A again
This allows an engine to perform GPU side view specification and let the
draw manager extract the culling informations (bounds).
To this end, the matrices ubo gets exposed to be able to write to it.
`compute_procedural_bounds()` need to be explicitely called before any
main pass using the culling result.
This abstraction is rarely used. It could be replaced by some more
general "query" API in the future. For now it's easier to just compare
pointers in the Set Position node where this was used.
This is possible now, because mesh positions are stored as flat `float3`
arrays (previously, they were stored as `MVert` with some other data
interleaved).
This changes how we access the points that correspond to each curve in a `CurvesGeometry`.
Previously, `CurvesGeometry::points_for_curve(int curve_index) -> IndexRange`
was called for every curve in many loops. Now one has to call
`CurvesGeometry::points_by_curve() -> OffsetIndices` before the
loop and use the returned value inside the loop.
While this is a little bit more verbose in general, it has some benefits:
* Better standardization of how "offset indices" are used. The new data
structure can be used independent of curves.
* Allows for better data oriented design. Generally, we want to retrieve
all the arrays we need for a loop first and then do the processing.
Accessing the old `CurvesGeometry::points_for_curve(...)` did not follow
that design because it hid the underlying offset array.
* Makes it easier to pass the offsets to a function without having to
pass the entire `CurvesGeometry`.
* Can improve performance in theory due to one less memory access
because `this` does not have to be dereferenced every time.
This likely doesn't have a noticable impact in practice.
Differential Revision: https://developer.blender.org/D17025
Struct members loc/size were misleading as they read as if the object
data stored object level transform channels. Rename these to match RNA
with a `texspace_*` prefix to make it clear these struct members only
apply to texture-space transform.
Also rename ME_AUTOSPACE & ME_AUTOSPACE_EVALUATED to
ME_TEXSPACE_FLAG_AUTO & ME_TEXSPACE_FLAG_AUTO_EVALUATED.
Give the "Value" input a higher search weight than the "Index"
input, since it's more likely that users will want to connect to
that. Based on feedback from Simon Thommes.
Socket declarations exist all the time and it would be useful to use
them for tooltips at all times, not just when there is a computed log.
Differential Revision: https://developer.blender.org/D16846
Avoid calling `interpolate_to_evaluate` while evaluating normals,
which has to look up attributes by name for every curve. Also avoid
duplicating the curve type switch in a few functions. I didn't observe
a performance difference, but theoretically this could reduce
overhead for many small curves.
Due to precision issues, the cosine value calculated with
`dot_v3v3(start, end)` can be outside the -1, 1 range causing `acosf`
to return `nan(ind)`.
Use `angle_signed_on_axis_v3v3_v3` instead. It returns more accurate
values, deduplicates code, and avoids these `nan` issues.
Since 90ea1b7643, node trees have been reevaluated
after many selection operations because nodes are sorted based on
the selection status and an update tag was added for that. However,
for years the node order was allowed to be different between the
original and evaluated copy of node trees.
Though it is a bit sketchy to have that difference in the evaluated
node tree, reevaluations for just selection are very bad, so use a
"smaller" update tag and add a comment for justification.
Differential Revision: https://developer.blender.org/D17023
wi is the viewing direction, and wo is the illumination direction. Under this notation, BSDF sampling always samples from wi and outputs wo, which is consistent with most of the papers and mitsuba. This order is reversed compared with PBRT, although PBRT also traces from the camera.
The order of arguments to memcpy was reversed, which is sadly possible
because the constness `KeyBlock` of keyblock doesn't propagate to
pointers it contains.
Caused by 6769acbbba.
Some of the matrix variants are rather obscure from the
semantic: they don't really fully initialize the output:
as in, they only write to an upper-left 3x3 block.
A quick solution to fix the very commonly used constraint.
It feels that it is possible to minimize about of copy
operations.
The Grease Pencil Material Popover currently has a color picker
for the Stroke of a Material using Solid style, but not one for
a Fill using Solid style.
With the default Grease Pencil Materials, the current
popover only shows the Stroke color for the grey "Solid Fill"
material (which doesn't have its Stroke enabled) instead of
the more useful Fill color.
This patch shows a Stroke color picker when the Material
has Stroke enabled and the style is Solid.
This is the same for the Fill.
Reviewed By: antoniov, mendio
Differential Revision: https://developer.blender.org/D17004
Previously, the node would always evaluate the input field on the
entire geometry domain. This is good when most indices will be
accessed afterwards. However, it is quite a bad when only a single
index is used. Now the field is only evaluated for that one index.
Remove:
- IDPropertyTemplate.matrix_or_vector
Matrix & vector types have been deprecated, this wasn't used.
- IDProperty.saved
This was added preemptively but never used, replace with a pad so as
not to hint at a feature that doesn't exist.
The default curve type when there is no "curve_type" attribute is
Catmull ROM. In order to avoid allocating an entire array of values
just to set this default type, remove the attribute instead. This will
be less important when we can store attributes as single values.
Also fix a curve utility API comment.
Improve safety and correctness of matrix multiplication by using
temporary storage if one of the inputs is also the output.
No functional changes.
Differential Revision: https://developer.blender.org/D16876
Reviewed By: Campbell Barton, Sergey Sharybin
Since a year and a half ago we've been switching to a new way to
represent what sockets a node should have called "declarations"
that's easier to use, clearer, and more flexible for upcoming
features like dynamic socket counts or generic type sockets.
All builtin nodes with a static set of sockets have switched, but one
missing area has been group nodes and group input/output nodes. These
nodes have **dynamic** declarations which change based on their
properties or the group they're inside of. This patch addresses that,
in preparation for using the same dynamic declaration feature for
simulation nodes.
Generally there shouldn't be user-visible differences, but one benefit
is that user-created socket descriptions are now visible directly in
the node editor for group nodes and group input/output nodes.
The commit contains a few changes:
- Add a node type callback for building dynamic declarations with
different arguments
- Add an `Extend` socket declaration for the "virtual" sockets used
for connecting new links
- A similar `Custom` socket declaration is used for addon-defined socket
- Simplify the node update loop to use the declaration to build update
sockets
- Replace the "group update" functions with the declaration building
- Move the node group input/output link creation to link drag operator
- Make the field status part of group node declarations
(not for group input/output nodes though)
- Some fixes for declarations to make them update and build properly
Differential Revision: https://developer.blender.org/D16850
Under some circumstances (loading autosaves), we end up reading from
files that were saved with the new mesh format (after T95965). When
that happens we should skip the conversion from the old format to
avoid data-loss. This will also give forward compatibility when we
stop saving in the old format completely in 4.0.
Here I mostly just check if the attributes in the new format already
exist. Along with checking for the null status of `Mesh::mvert`, that
should cover the majority of cases.
Fixes T103878
Differential Revision: https://developer.blender.org/D17011
This fixes the UI alignment issues that were introduced by {D12815} with the addition of the boolean custom properties.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D17012
Previously transforming and translating meshes (used by the object info
and transform geometry nodes) was single threaded. Now use the same
code path as other geometry types which already includes multithreading.
I observed a 5x performance improvement for a 4 million vert mesh on a
Ryzen 7950x.
Trim erronously samples the next to last control point when it should
sample the last control point on the curve. This only happens when
reducing the curve to a single point. These changes should correct
the behavior.
Differential Revision: https://developer.blender.org/D17003
ViewCullingData::corners (vec4) was casted to a BoundingBox (vec3), so the frustum corners were uploaded in the wrong format to the GPU.
Now the ViewCullingData::corners are used directly without casting, since the BoundBox API is not really needed.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D17008
While keeping SSE2, SSE4.1 and AVX2. This does not affect hardware support, it
only slightly reduces performance for some older CPUs.
To reduce maintenance cost and improve compile times.
Differential Revision: https://developer.blender.org/D16978
Separating strokes using "selected points" didn't take into account
that points->time can be 0 and thus created points with negative
values in points->time, which should be an impossibility.
This patch fixes this in BKE_gpencil_stroke_delete_tagged_points.
Also, it makes the build modifier's new drawspeed immune
to (erroneous) negative time values, should they arise in other situations.
Reviewed By: antoniov
Differential Revision: https://developer.blender.org/D17006
Implementation didn't count the string terminator when allocating
memory to store `msl_patch_default`. The string terminator could
be overwritted by other memory adding some undefined behavior.
An alternative fix to [0] which caused an error with ASAN
(freeing an GHOST_ISystem instead of a GHOST_System).
Reported by @Baardaap in chat, I'm unable to reproduce the issue.
Instead of calling the destructor directly, add a private method that
deletes data before raising an exception.
[0]: fd36221930
Use a consistent style for declaring the names of struct members
in their declarations. Note that this convention was already used in
many places but not everywhere.
Remove spaces around the text (matching commented arguments) with
the advantage that the the spell checking utility skips these terms.
Making it possible to extract & validate these comments automatically.
Also use struct names for `bAnimChannelType` & `bConstraintTypeInfo`
which were using brief descriptions.
Meshes spawning particles from faces with with UV's/Vertex-colors but no
faces would crash de-referencing a NULL pointer.
Resolve by adding a check for this case and an assertion if CD_MFACE is
NULL when the mesh has polygons.
Ref D16947
These allow the usage of `atomicMin` and `atomicMax` function with float
values as there is no overload for these types in GLSL.
This also allows signed 0 preservation.
This wasn't really a problem since these are set on first bind or creation.
The test `if (enabled_srgb && srgb_) {` was depending on that variable that
in certain case, might not have been initialized (because of lazy init).
Changes to overlay_shader.cc workaround a bug in GCC-12.2
(likely a duplicate of [0]). As the workaround involved removing
a local variable which most functions already didn't assign,
remove it for all functions.
An alternative is to add (otherwise redundant) parenthesis, e.g.
`&(e_data.sh_data[sh_cfg])`, but this would need to be noted in
code-comments, so opt for removing the intermediate variable.
[0]: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=106247
As noted in comments, there are a lot of false positives which can't
be conveniently suppressed. Many of these warnings were caused by
`float x, y, z` being passed as `float[3]` using a pointer to `x`.
This makes `GVArrayImpl` and `VArrayImpl` more similar.
Only passing the pointer instead of the span also increases
efficiency a little bit. The downside is that a few asserts had
to be removed as well. However, in practice the same asserts
are in place at a higher level as well (in `VArrayCommon`).
In most cases it is currently not used, so always having it there
causes unnecessary overhead. In my test file that causes
a 2 % performance improvement.
Previously, `ParamsBuilder` lazily allocated an array for an
output when it was unused, but the called multi-function
wanted to access it. Now, whether the multi-function supports
an output to be unused is part of the signature. This way, the
allocation can happen earlier when the parameters are build.
The benefit is that this makes all methods of `MFParams`
thread-safe again, removing the need for a mutex.
`std::get` could not be used due to restrictions on macos.
However, the minimum requirement has been lifted in
{rB597aecc01644f0063fa4545dabadc5f73387e3d3}.
Currently you can retrieve a mutable array from a const CustomData.
That makes code unsafe since the compiler can't check for correctness
itself. Fix that by introducing a separate function to retrieve mutable
arrays from CustomData. The new functions have the `_for_write`
suffix that make the code's intention clearer.
Because it makes retrieving write access an explicit step, this change
also makes proper copy-on-write possible for attributes.
Notes:
- The previous "duplicate referenced layer" functions are redundant
with retrieving layers with write access
- The custom data functions that give a specific index only have
`for_write` to simplify the API
Differential Revision: https://developer.blender.org/D14140
Fixes bugs where UV islands with `mark seam` would tear at boundaries.
Modify seam_connected to search both it's edges instead of only one,
as this could fail if the edge was a seam or did not fan to the other loop.
Also fixes bug in `seam_connected_recursive`:
- `loop->prev == needle` changed to `loop == needle`
Maniphest Tasks: T103787
Reviewed By: Campbell Barton
Differential Revision: https://developer.blender.org/D16992
Test File: F14145477, F14137755, T79304
Avoid using components that can contain null pointer.
Getting attibute should avoid trying to do it for a null mesh.
This fix bypasses working with components.
Differential Revision: https://developer.blender.org/D16997
The crease custom data layer was added to a mutable version of the mesh,
but that wasn't used in the rest of the operation. Also the layer wasn't
retrieved properly with write access from the custom data API (fixed
separately as part of D14140). Also clean up a bit by retrieving
attributes from the mesh directly and by tweaking naming a bit.
Timecodes were generated from read packets, but applied to decoded
frames. This works as long as delay between packet read and decoded
frame is less than GOP size or if packet does not produce multiple
frames. In this case it did not work.
Use `pkt_pos`, `pkt_dts` and `pts` from `AVFrame` instead of `AVPacket`.
This way delay can be eliminated and timecode files are more reliable.
Effectively this disables two volume modifiers for the new curves
object and the point cloud object types. The aim is to simplify the
process of using these object types to prove out a node-group-based
workflow integrated with the asset browser. We're making the assumption
that these two modifiers were used very rarely on the new curves type
since that wasn't its purpose, so this breaks backwards compatibility.
Similar to the corresponding properties on node sockets, only adjust
the soft range. Because group nodes only have soft limits, groups
should generally be able to accept these inputs anyway. The benefit
of only using a soft range is that it allows choosing a more user-
friendly default range while keeping flexibility.
A proper boolean custom property type is commonly requested. This
commit simply adds a new `IDP_BOOLEAN` type that can be used for
boolean and boolean array custom properties. This can also be used
for exposing boolean node sockets in the geometry nodes modifier.
I've just extended the places existing IDProperty types are used, and
tested with the custom property edit operator and the python console.
Adding another IDProperty type is a straightforward extension of the
existing design.
Differential Revision: https://developer.blender.org/D12815
- `Interpolate Domain` -> `Evaluate on Domain`
- `Field at Index` -> `Evaluate at Index`
These names, discussed in recent geometry nodes submodule meetings,
describe actions rather than nouns, which is generally how nodes are
supposed to be named. The names are consistent, which is helpful
because they're similar conceptually. They also don't require knowledge
of the field concept, which we generally try to keep out of the UI in
favor of more beginner-friendly concepts.
We hope to add the ability to search for nodes with multiple
names for 3.5, so the old names can still have search items.
The menus are growing too large. This patches move some categories under
sub-menus, and shuffle some entries around.
We already had sub-categories split by separators. This change now
goes a step further and embrace 3-level menus.
Inspired by the "Simpler Add Menu" add-on by Quackers (waiting to hear
back to know Quackers real name).
Inspired by the "Simpler Add Menu" add-on by Alfonso Martinez II.
Differential Revision: https://developer.blender.org/D16993
Caused by {rBd397ecae325}.
Above commit added a new socket, so
`version_geometry_nodes_primitive_uv_maps` was getting the wrong sockect
with `->next`.
Now get the right one with yet another `->next` (might not be ideal, but
searching the right socket with other methods might be overhead?)
Maniphest Tasks: T103837
Differential Revision: https://developer.blender.org/D16994
When idle, each 3D view made two calls CTX_data_mode_enum(C) from the
WM_main loop. While not causing problems it complicated troubleshooting
high CPU use while idle in other areas.
Access the object via the view layer, giving approx 40x speedup.
Recently the event handling thread for Wayland sometimes used 100% of a
CPU core while idle.
Resolve by waiting for changes to the Wayland file-handle when
there are no events to read.
The previous fix from T100855 [0] no longer works on my system
(3.4.1 release also fails for GNOME/KDE/WLROOTS compositors).
Resolve by removing the loop from the wait-on-file handle check.
Also reduce locking/unlocking calls.
[0]: 37b256e26f
The new C++ OBJ importer was missing "split by objects" / "split by
groups" import settings of the older Python importer.
Implements T103839.
Added test coverage for all 4 possible combinations of these two
options.
This is caused by the partial derivatives not being precise enough to
take the tube shape into account. For now we just disable displacement
bump for this type of geometry to match cycles.
Fixes T101175 Eevee displacement behavior changed
In patch D16759 cleanup a else was removed by error which
deals with situations where current gpf was copied,
so that previous gpf may have MORE strokes than current gpf.
Reviewed By: antoniov
Differential Revision: https://developer.blender.org/D16986
Remove the unused function `pose_propagate_fcurve`
It was missed in D16771
Reviewed By: Jacques Lucke
Differential Revision: https://developer.blender.org/D16937
Ref: D16937
In case there is only 1 key on the FCurve,
the operator can run into a situation where it divides by 0.
It now skips the curve in that case
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D16982
Ref: D16982
For some reason the Armature modifier in the Multi-Modifier mode
interpreted the vertex group in a way essentially opposite to the
regular mode. Moreover, this depended not on the Multi-Modifier
checkbox, but on whether the mode was actually active.
This fixes the flip and adds versioning code to patch old files.
One difficulty is that whether the Multi-Modifier flag is valid
can be different between the viewport and render. The versioning
code assumes any modifier enabled in either to be active.
This change is not forward compatible, so min version is also bumped.
Differential Revision: https://developer.blender.org/D16787
User notifications in Blender were always annoying and therefore by default turned off.
- When tweaking compositor/material tree a notification was shown.
- When rendering an animation for each frame a notification was shown.
The reason for this was that it was automatically shown when a background job was
finished and Blender wasn't the top most application.
In stead of migrating user notification to UserNotification.framework it was decided
to remove it for now. If in the future notifications should be added back we should
start with a design to figure out where notifications makes sense.
Reviewed By: sergey, brecht
Maniphest Tasks: T103757
Differential Revision: https://developer.blender.org/D16955
Replace the pointers in the MeshEdge with indexes, removing MeshPrimitive and MeshVertex.
Code cleanup proposed by the geometry nodes to make the data structures more reusable by
other areas of Blender as well. Old implementation was to focused to the texture painting.
Initial the idea was to do the same with the data structures in UVIslands, but there some
concerns were raised that requires a different design than expected from a clean-up patch.
Concerns raised about converting UVIslands:
* Maps between UVPrimitive, UVEdge and UVVertex will be stored inside the UVIsland.
During UVIsland extraction detected islands can be merged. When they are merged all
Indexes should be updated.
* It is not possible to pre-allocate all buffers as they grow, what will lead to more re-allocations. The current
implementation uses a VectorList to ensure that re-allocations don't require the data to be
moved to the newly allocated memory. We could store some information about last used
sizes in runtime data to reduce the re-allocation overhead.
* Solution would require index based access inside a VectorList, which might increase the
complexity.
* UVIslands during 3d texturing is used as intermediate data, the final data is stored as PackedPixelRows.
We could proceed converting UVIslands as well, but that would lower the performance noticeably.
3D texturing has performance requirements, so when doing so we should make sure that
it matches that as well.
Reviewed By: HooglyBoogly
Maniphest Tasks: T101740
Differential Revision: https://developer.blender.org/D16752
Cycles converts internal links to converter nodes which don't do anything and
later on get collapsed by the graph optimization. However, the previous code
assumed that one Blender input socket maps to one Cycles input socket.
When a node is muted, there might be internal links from one input to multiple
outputs. In Cycles, this meant that one Blender input socket now mapped to
multiple input sockets on all the converter nodes, so only the last one survived.
THe fix is simple, just make the mapping a MultiMap.
The problem here is that whether an object is a shadow catcher or not affects the
visibility flags, but changes to the shadow catcher property did not trigger a
visibility flag update.
Added an extrude mode enum to the trim operators to
control extrusion: "project" and "fixed." "Fixed" just
extrudes along a fixed normal and is the new default.
New code from rBd05909a70c36 last week did not take into account
liboverride templates and `NOOP` operations. So we cannot assume that
there is no valid override property for these which need to be restored.
While we may get rid of templates at some point now, for now they are
still exposed in PY API, and have some basic unittests, so keep them
working as best as possible.
Issue reported on IRC by Martijn Versteegh (@Baardaap), thanks!
It is a part of the Phabricator to Gitea migration.
The issue template is based on the bug submission instructions which
are shown in the Phabricator's bug submission form. Some further tweaks
are likely needed, but the current version of the template simplifies
re-iteration while working on the migration.
The pull request template is needed to override the template in the
.github folder which is otherwise picked up by Gitea.
Tool settings can be accessed from both `tool_settings` &
`scene.tool_settings`.
As of [0] `scene.tool_settings` was used instead of `tool_settings`
causing the snap shortcut not to display.
Resolve by supporting variations of data-paths so both are detected.
[0]: 9a76dd2454
Logic to skip UV layers that are part of the MLoopUV treated all
loop-layers as UV's, causing duplicate and invalid names to be added
to be added to 'uv_sublayers_to_skip', this asserted in debug mode
when saving the `ellie_animation.blend` demo blend file.
Byte colors are generic attributes and are therefore included in
CD_MASK_PROP_ALL. Also clarify the use of vertex groups.
They always have to be propagated since they're displayed in
the spreadsheet, etc.
Move the `ME_SHARP` flag for mesh edges to a generic boolean
attribute. This will help allow changing mesh edges to just a pair
of integers, giving performance improvements. In the future it could
also give benefits for normal calculation, which could more easily
check if all or no edges are marked sharp, which is helpful considering
the plans in T93551.
The attribute is generally only allocated when it's necessary. When
leaving edit mode, it will only be created if an edge is marked sharp.
The data can be edited with geometry nodes just like a regular edge
domain boolean attribute.
The attribute is named `sharp_edge`, aiming to reflect the similar
`select_edge` naming and to allow a future `sharp_face` name in
a separate commit.
Ref T95966
Differential Revision: https://developer.blender.org/D16921
An apostrophe should not be used because it is not a mark of plural,
even for initialisms. This involves mostly comments, but a few UI
messages are affected as well.
Differential Revision: https://developer.blender.org/D16749
This property was intended to keep the snap elements synchronized with the scene.
But another solution exists.
And this property is not even working correctly.
This patch is a response to T101313.
Adds a selection to the Store Named Attribute node.
If the attribute does not exist unselected parts
are filled with zero values. Otherwise, only the
selected parts are filled.
Differential Revision: https://developer.blender.org/D16237
It was introduced in commit https://developer.blender.org/rB0fb12a9c2ebc
The problem was that the tool uses the same values for all modes,
but the new calculation must be only for Draw mode.
Now the mode is checked.
This is a mere "get this to compile in C++", didn't do changes like
using `MEM_cnew()` instead of `MEM_calloc()`.
Needed for the blender-project-basics branch, so I don't have to write C
wrappers for a single call from this file.
With the GPU API the sampler can not be set after texture binding, which caused
a delay of the actual change. Now do both in a single call for correctness and
performance.
Caused by NULL dereference in strip overlap handling (expand to fit),
because `time_dependent_strips` strip collection is not created.
Check if strip collection is provided in `query_right_side_strips()`.
Updates the add and search menu of the node editor to use the new "All"
asset library introduced in the previous commit. This simplifies code by
removing redundant logic to merge contents of multiple asset libraries.
Adds a new built-in asset library that contains all other asset
libraries visible in the asset library selector menu. This also means
all their asset catalogs will be displayed as a single merged tree. The
asset catalogs are not editable, since this would require support for
writing multiple catalog definition files, which isn't there yet.
Often it's not relevant where an asset comes from. Users just want to be
able to get an asset quickly, comparable to how people use a search
engine to browse images or the web itself, instead of first going to a
dedicated platform. They don't want to bother with first choosing where
they want the result to come from.
This especially is needed for the Asset Shelf (T102879) that is being
developed for the brush assets project (T101895). With this, users will
have access to all their brushes efficiently from the 3D view, without
much browsing.
Did an informal review of the asset system bits with Sybren.
This patch uses the recorded drawing speed to rebuild the strokes. This results in a way more
natural feel of the animation.
Here's a short summary of existing data used:
- gps->points->time: This is a timestamp in seconds of when the point was created
since the creation of the stroke. It's quite often 0 (I added a sanitization routine).
- gpf->inittime: This is a timestamp in seconds when a stroke was drawn measured
since some unknown point in time. I only ever use the difference between two strokes,
so the absolute value is not relevant.
Reviewed By: frogstomp, antoniov, mendio
Differential Revision: https://developer.blender.org/D16759
When adding a new layer from the viewport, the newly created layer
is set as active, which is visible in the properties panel,
but the selection in the dopesheet was not updated accordingly,
due to a missing notifier which is added in this patch.
A few weeks ago we enabled the Metal back-end for the viewport.
Due to metal, master is only able to build on MacOS 10.15 and above.
The previous minimum requirement is MacOS 10.13.
It was already planned to bump to a higher version for Blender 3.6. After
a short discussion via bf-committers it was decided that it is fine to bump it for
3.5 release.
This patch cleans up the CMake files and update the minimum requirement.
With this patch the next deprecations will be listsed.
- `NSOpenGLView`, `NSOpenGLContext` is deprecated. (replaced by metal)
- `NSStringPboardType` is replaced by `NSPasteboardTypeString`
- `NSTIFFPboardType` is replaced by `NSPasteboardTypeTIFF`
- `NSFilenamesPboardType` should be replaved by multiple pasteboard items with `NSPasteboardTypeFileURL` instead.
- `NSUserNotification` should be replaced with UserNotifications.frameworks API
Deprecations will be handled in separate tasks and commits. OpenGL won't be
fixed at this moment, as it will be phased out in the future. NSStringPboardType, NSTiffPboardType & NSFilenamesPboardType
will be provided in a single patch. NSUserNotification will also be provided in
its own patch.
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D16953
OpenGL is deprecated by Apple and triggers a warning when used. The goal
is that OpenGL is replaced by Metal backend, but we are not there yet.
To improve tracability of new warnings we hide deprecation warnings
when the GHOST_ContextCGL.h file is included.
NOTE: This change silences other deprecation warnings as well.
Set origin and convert operator now accepts point cloud and new curve
object. But these operators were not added in context menu.
Support for set origin and convert operator was added in
rBadb4dd911b91, rB933d56d9e98d and rB2752a88478a8
Reviewed by: HooglyBoogly
Differential Revision: https://developer.blender.org/D16939
The T103586 fix effectively ran the wl_surface_listener.leave callback
to as WLROOTS based compositors doesn't run them. Remove the workaround
since it's an error in WLROOTS to be fixed upstream.
Temporarily using the wrong window scale when disconnecting a monitor
on configurations that use different DPI per monitor is a minor enough
issue that I don't think it makes sense to workaround in GHOST.
Using run-time members in the surface modifier complicated code-review
and caused an unnecessary renaming in `dna_rename_defs.h`.
Also rename:
- `x` -> `vert_positions_prev`.
- `v` -> `vert_velocities`.
- `cfra` -> `cfra_prev`.
The mesh positions are now a span, but the convex hull didn't copy
the custom data layout to the new mesh since it assumed it didn't
need to. Moving UV maps to a generic attribute triggers this difference
in the test results.
It doesn't really make sense for the convex hull node to copy the
source mesh custom data layout at all anyway, but do it anyway
to avoid having to change the tests right now.
Currently the `MLoopUV` struct stores UV coordinates and flags related
to editing UV maps in the UV editor. This patch changes the coordinates
to use the generic 2D vector type, and moves the flags into three
separate boolean attributes. This follows the design in T95965, with
the ultimate intention of simplifying code and improving performance.
Importantly, the change allows exporters and renderers to use UVs
"touched" by geometry nodes, which only creates generic attributes.
It also allows geometry nodes to create "proper" UV maps from scratch,
though only with the Store Named Attribute node for now.
The new design considers any 2D vector attribute on the corner domain
to be a UV map. In the future, they might be distinguished from regular
2D vectors with attribute metadata, which may be helpful because they
are often interpolated differently.
Most of the code changes deal with passing around UV BMesh custom data
offsets and tracking the boolean "sublayers". The boolean layers are
use the following prefixes for attribute names: vert selection: `.vs.`,
edge selection: `.es.`, pinning: `.pn.`. Currently these are short to
avoid using up the maximum length of attribute names. To accommodate
for these 4 extra characters, the name length limit is enlarged to 68
bytes, while the maximum user settable name length is still 64 bytes.
Unfortunately Python/RNA API access to the UV flag data becomes slower.
Accessing the boolean layers directly is be better for performance in
general.
Like the other mesh SoA refactors, backward and forward compatibility
aren't affected, and won't be changed until 4.0. We pay for that by
making mesh reading and writing more expensive with conversions.
Resolves T85962
Differential Revision: https://developer.blender.org/D14365
Edit-mesh duplicator logic used a struct member vert_coords which read
as an alternative (and inconsistent) naming to vert_positions.
Rename to `vert_positions_deform` as the purpose of this value is to
assign when modifiers deform an edit-mesh.
Add `_deform` suffix to normals as well.
Use font's OS/2 table code page range bits to help differentiate
between Korean, Japanese, Simplified & Traditional Chinese fonts.
See D16484 for details.
Differential Revision: https://developer.blender.org/D16484
Reviewed by Brecht Van Lommel
Wayland requires the windows surface size is divisible by the surface
scale. This wasn't guaranteed when creating new temporary windows.
This meant opening the preferences could exit Blender with an error
with Hi-DPI configurations.
**Changes**
As described in T93602, this patch removes all use of the `MVert`
struct, replacing it with a generic named attribute with the name
`"position"`, consistent with other geometry types.
Variable names have been changed from `verts` to `positions`, to align
with the attribute name and the more generic design (positions are not
vertices, they are just an attribute stored on the point domain).
This change is made possible by previous commits that moved all other
data out of `MVert` to runtime data or other generic attributes. What
remains is mostly a simple type change. Though, the type still shows up
859 times, so the patch is quite large.
One compromise is that now `CD_MASK_BAREMESH` now contains
`CD_PROP_FLOAT3`. With the general move towards generic attributes
over custom data types, we are removing use of these type masks anyway.
**Benefits**
The most obvious benefit is reduced memory usage and the benefits
that brings in memory-bound situations. `float3` is only 3 bytes, in
comparison to `MVert` which was 4. When there are millions of vertices
this starts to matter more.
The other benefits come from using a more generic type. Instead of
writing algorithms specifically for `MVert`, code can just use arrays
of vectors. This will allow eliminating many temporary arrays or
wrappers used to extract positions.
Many possible improvements aren't implemented in this patch, though
I did switch simplify or remove the process of creating temporary
position arrays in a few places.
The design clarity that "positions are just another attribute" brings
allows removing explicit copying of vertices in some procedural
operations-- they are just processed like most other attributes.
**Performance**
This touches so many areas that it's hard to benchmark exhaustively,
but I observed some areas as examples.
* The mesh line node with 4 million count was 1.5x (8ms to 12ms) faster.
* The Spring splash screen went from ~4.3 to ~4.5 fps.
* The subdivision surface modifier/node was slightly faster
RNA access through Python may be slightly slower, since now we need
a name lookup instead of just a custom data type lookup for each index.
**Future Improvements**
* Remove uses of "vert_coords" functions:
* `BKE_mesh_vert_coords_alloc`
* `BKE_mesh_vert_coords_get`
* `BKE_mesh_vert_coords_apply{_with_mat4}`
* Remove more hidden copying of positions
* General simplification now possible in many areas
* Convert more code to C++ to use `float3` instead of `float[3]`
* Currently `reinterpret_cast` is used for those C-API functions
Differential Revision: https://developer.blender.org/D15982
Since internal links are only runtime data, we have the flexibility to
allocating every link individually. Instead we can store links directly
in the node runtime vector. This allows avoiding many small allocations
when copying and changing node trees.
In the future we could use a smaller type like a pair of sockets
instead of `bNodeLink` to save memory.
Differential Revision: https://developer.blender.org/D16960
activeSnap --> transform_snap_is_active
activeSnap_SnappingIndividual --> transform_snap_project_individual_is_active
activeSnap_SnappingAsGroup --> transform_snap_mixed_is_active
applySnappingIndividual --> transform_snap_project_individual_apply
applySnappingAsGroup --> transform_snap_mixed_apply
Also rearrange functions to be close to where they are used.
And use static when possible.
When rendering in the viewport (or probably on instanced objects, but I didn't
test that), emissive objects whose scale is negative give the wrong value on the
"backfacing" input when multiple sampling is enabled.
The underlying problem was a corner case in how normal transformation is handled,
which is generally a bit messy.
From what I can tell, the pattern appears to be:
- If you first transform vertices to world space and then compute the normal from
them (as triangle light samping, MNEE and light tree do), you need to flip
whenever the transform has negative scale regardless of whether the transform
has been applied
- If you compute the normal in object space and then transform it to world space
(as the regular shader_setup_from_ray path does), you only need to flip if the
transform was already applied and was negative
- If you get the normal from a local intersection result (as bevel and SSS do),
you only need to flip if the transform was already applied and was negative
- If you get the normal from vertex normals, you don't need to do anything since
the host-side code does the flip for you (arguably it'd be more consistent to
do this in the kernel as well, but meh, not worth the potential slowdown)
So, this patch fixes the logic in the triangle emission code.
Also, turns out that the MNEE code had the same problem and was also having
problems in the viewport on negative-scale objects, this is also fixed now.
Differential Revision: https://developer.blender.org/D16952
- Avoid calling node interface items "sockets"
- Use "active" instead of "current" to be more correct
- Avoid using the same word in description and name
- A couple grammar fixes
- Matrix normalize overloads needs to have the vector normalize redefined.
- double underscore (anywhere in symbol name) are reserved.
- Some operation yield different result due to float imprecision. Increasing
epsilon threshold for the failing tests.
Incorrect offset was calculated when strip was implicitly retimed (movie
FPS does not match scene FPS). This is because strip playback rate was
not used for offset calculation at all.
Since hold offset is specifying numbers of frames to skip, but at frame
rate of the source, this could result in gap when splitting the strip.
If that occurs, gap is compensated by moving handle to frame where strip
is split.
Happens, for example, when the object has animation, and disabled for
render, and animation render is performed.
The regression has been uncovered by f12f7800c2 which made it so
the dependency graph relies on runtime visibility tracking and
updates (without updating relations).
The optimization from a while ago in the ff60dd8b18 got in a way
of the visibilit updates because it removed relation between two
no-op nodes which belong to different IDs, which make the visibility
tracking impossible.
This change makes it so only relations which belong to the same
component are removed. This matches the expectations of the visibility
tracking (which, actually, also needed to happen at the moment of the
initial optimization commit). Technically, this change could introduce
some performance regression, but with the current design design of the
graph it is not really avoidable.
The idea to gain the best performance is to separate relations which
actually define the execution flow, and which are only needed to
define things like visibility dependencies.
When drawing using the option `Outline` the result stroke
was not using the Vertex Color option and always was converted
using material.
Now the vertex color option is used.
Crash only occured when textures was stored in a gray scale GPU
texture and was scaled down to fit inside the given limitation.
In this case the original number of pixels were packed into the
GPU buffer, not taken into account the scaled down image. This
resulted in a buffer overflow.
The bug is caused by rBb66b3f547c43e841a7d5da0ecb2c911628339f56.
From what I can see, that fix was intended to enable manual lens shift for
panorama cameras, but it appears that it also unintentionally applies
interocular shift.
This fix disables the multiview shift for panorama cameras, that way manual lens
shift still works but we get the 2.x behavior for stereoscopic renders back.
Differential Revision: https://developer.blender.org/D16950
The code that computes and inverts the shutter CDF had some issues that caused
the result to be asymmetric, this tweaks it to be more robust and produce
symmetric outputs for symmetric inputs.
At the first bounce, the diffuse/glossy/transmission weights are stored so that
contributions along the path can be split into the d/g/t indirect passes.
However, volume bounces always set the weight even at indirect bounces, so
even paths that had their first bounce on a purely glossy object would suddenly
start counting towards the diffuse indirect pass after a secondary volume bounce.
Do not clear all the font's glyph caches with single-step zoom
operators if the area does not change font size when doing so.
See D16785 for more details.
Differential Revision: https://developer.blender.org/D16785
Reviewed by Campbell Barton
During geometry nodes evaluation some sockets can be determined
to be unused, for example based on the condition input in a switch node.
Once a socket is determined to be unused, that information has to be
propagated backwards through the tree to free any memory that may
have been reserved for those sockets already. This is happening before
this commit already, but in a less ideal way.
Determining that sockets are unused early is good because it helps with
memory reuse and avoids copy-on-write copies caused by shared data.
Now, nodes that are scheduled because an output became unused have
priority over nodes scheduled for other reasons.
This allows auto-vectorization to happen when the a multi-function is
evaluated in "materialized" mode, i.e. it is processed in chunks where
all input and outputs values are stored in contiguous arrays.
It also unifies the handling input, mutable and output parameters a bit.
Now they all can use tempory buffers in the same way.
Staging texture update copied over the entire texture, rather than just the region of the texture which had been updated. Also added early-exit for cases where the net texture update extent was zero, as this was causing validation failures.
Authored by Apple: Michael Parkin-White
Ref T103658
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T103658, T96261
Differential Revision: https://developer.blender.org/D16924
First binding of a framebuffer lead to an incorrect SRGB conversion state being applied, as attachments, where presence of SRGB is determined, were processed after the SRGB check rather than before.
This DIFF also cleans up SRGB naming conventions and caching of fallback non-srgb texture view, for use when SRGB mode is disabled.
Authored by Apple: Michael Parkin-White
Ref T103399
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T103399, T96261
Differential Revision: https://developer.blender.org/D16907
This simplifies the code enough so that msvc is able to unroll and
vectorize some multi-functions like simple addition.
The performance improvements are almost as good as the GCC
improvements shown in D16942 (for add and multiply at least).
Required texture bytesize calculation for compacted data types was incorrectly calculated, resulting in an erroneous format conversion taking place instead of direct data upload.
Metal dummy buffer size also temporarily increased to address problematic cases where the bound buffer was too small for missing UBOs.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D16904
This was caused by rB0d73d5c1a2, which releases the scene mutex during kernel
loading. However, the reset mutex was still held, which can cause a deadlock
if another thread tries to reset the session, since it will acquire the
released scene mutex and then wait for the reset mutex.
Turns out there's no point in keeping the reset mutex locked after the delayed
reset section, so now we just release it earlier, which resolves the deadlock.
This mainly helps GCC catch up with Clang in terms of field evaluation
performance in some cases. In some cases this patch can speedup
field evaluation 2-3x (e.g. when there are many float math nodes).
See D16942 for a more detailed benchmark.
This moves all multi-function related code in the `functions` module
into a new `multi_function` namespace. This is similar to how there
is a `lazy_function` namespace.
The main benefit of this is that many types names that were prefixed
with `MF` (for "multi function") can be simplified.
There is also a common shorthand for the `multi_function` namespace: `mf`.
This is also similar to lazy-functions where the shortened namespace
is called `lf`.
* `depends_on_context` was not used for a long time already.
* `param_data_indices` is not used since rB42b88c008861b6.
* The remaining data is moved to a single `Vector` to avoid
having to do two allocations when the size signature becomes
larger than fits into the inline buffer.
This avoids a move of the signature after building it. Tthe value had
to be moved out of `MFSignatureBuilder` in the `build` method.
This also makes the naming a bit less confusing where sometimes
both the `MFSignature` and `MFSignatureBuilder` were referred
to as "signature".
* New `build_mf` namespace for the multi-function builders.
* The type name of the created multi-functions is now "private",
i.e. the caller has to use `auto`. This has the benefit that the
implementation can change more freely without affecting
the caller.
* `CustomMF` does not use `std::function` internally anymore.
This reduces some overhead during code generation and at
run-time.
* `CustomMF` now supports single-mutable parameters.
This refactors how devirtualization is done in general and how
multi-functions use it.
* The old `Devirtualizer` class has been removed in favor of a simpler
solution. It is also more general in the sense that it is not coupled
with `IndexMask` and `VArray`. Instead there is a function that has
inputs which control how different types are devirtualized. The
new implementation is currently less general with regard to the number
of parameters it supports. This can be changed in the future, but
does not seem necessary now and would make the code less obvious.
* Devirtualizers for different types are now defined in their respective
headers.
* The multi-function builder works with the `GVArray` stored in `MFParams`
directly now, instead of first converting it to a `VArray<T>`. This reduces
some constant overhead, which makes the multi-function slightly
faster. This is only noticable when very few elements are processed though.
No functional changes or performance regressions are expected.
This implement most of the functions provided by the BLI math library.
This is part of the effort to unify GLSL and C++ syntax. Ref T103026.
This also adds some infrastructure to make it possible to run GLSL shader unit
test.
Some code already present in other libs is being copied to the new libs.
This patch does not make use of the new libs outside of the tests.
Note that the test is still crashing when using metal.
This was limiting the use of the templates with other non internal types
like Ceres types, xithout defining thing like that:
`template<> inline constexpr bool is_math_float_type<mpq_class> = true;`
This breaks backwards compatibility some in that 3 sides will be mapped
differently now, but difficult to avoid and can be considered a bugfix.
Similar to rBdd8016f7081f.
Maniphest Tasks: T103615
Differential Revision: https://developer.blender.org/D16910
This patch implements the matrix types (i.e:float4x4) by making heavy
usage of templating. All matrix functions are now outside of the vector
classes (inside the blender::math namespace) and are not vector size
dependent for the most part.
###Motivations
The goal/motivations of this rewrite are the same as the Vector C++ API (D13791):
- Template everything for making it work with any types and avoid code duplication.
- Use functional style instead of Object Oriented function call to allow a simple compatibility layer with GLSL syntax (see T103026 for more details).
- Allow most convenient constructor syntax and accessors (array subscript `matrix[c][r]`, or component alias `matrix.y.z`).
- Make it cover all features the current C API supports for adoption.
- Keep compilation time and debug performance somehow acceptable.
###Consideration:
- The new `MatView` class can be generated by `my_float.view<NumCol, NumRow, StartCol, StartRow>()` (with the last 2 being optionnal). This one allows modifying parts of the source matrix in place. It isn't pretty and duplicates a lot of code, but it is needed mainly to replace `normalize_m4`. At least I think it is a good starting point that can refined further.
- An exhaustive list of missing `BLI_math_matrix.h` functions from the new API can be found here P3373.
- This adds new Rotation types in order to have a clean API. This will be extended when we port the full Rotation API. The types are made so that they don't allow implicit down-casting to their vector representation.
- Some functions make direct use of the Eigen library, bypassing the Eigen C API defined in `intern/eigen`. Its use is contained inside `math_matrix.cc`. There is conflicting opinion wether we should use it more so I contained its usage to almost the tasks as in the C API for now.
Reviewed By: sergey, JacquesLucke, HooglyBoogly, Severin, brecht
Differential Revision: https://developer.blender.org/D16625
Profiling shows that this computation consumes a noticeable amount
of time, so it is worth moving it to an earlier part of the code
that is executed less frequently and is multithreaded.
Differential Revision: https://developer.blender.org/D16933
Both cloth object collision and self collision use a BVH tree
representing the current cloth shape. The only difference between
them is the epsilon threshold value.
If these values are the same, it is possible to use the same tree
for both uses, thus easily reducing the overhead in the case when
both collision modes are used by the same cloth object.
Differential Revision: https://developer.blender.org/D16914
Caused by f1c0249f34, which filled the wrong value.
I have noticed several problems:
- Using a full array as single result.
- Checking single material index for 0. If we have a list of all slots,
then we must check this in the list.
- The result was filled false. Simple fix.
- Fixed problem with incorrect recording by mask indices, not polygons.
- Added domain specifics to names to avoid confusion.
Differential Revision: https://developer.blender.org/D16926
Previously you had to use a workaround with the Object info node to get
evaluated data from the new curves object to an original editable mesh.
This commit makes it so that a curves object can be converted directly
to a mesh object if it has evaluated curves or an evaluated mesh.
Differential Revision: https://developer.blender.org/D16930
Socket locations are set while drawing the node tree in the editor.
They can always be recalculated this way based on the node position and
other factors. Storing them in the socket is misleading. Plus, ideally
sockets would be quite small to store, this helps us move in that
direction.
Now the socket locations are stored as runtime data of the node editor,
making use of the new node topology cache's `index_in_tree` function
to make a SoA layout possible.
Differential Revision: https://developer.blender.org/D15874
Improve animation playback performance in EEVEE for materials using Mix
nodes. Socket availability was being set and reset on every evaluation
of Mix nodes, during animation playback, this was causing the graph to
be marked dirty, and the whole graph being re-evaluated on every frame,
causing performance issues during playback.
Additionally, do a bit of cleanup, traversing the node sockets with
the next link to improve clarity and reduce errors. Also refactoring
`nodeSetSocketAvailability` to early out and increase clarity on no-op.
Differential Revision: https://developer.blender.org/D16929
The reported backtrace in T102766 strongly points at some
concurrency issues within exisitng liboverride diffing code that
restores forbidden changes to reference linked data values.
This commit instead add tags to mark liboverrides/properties that need
to be restored, and do so in a separate new step of diffing, from the
main thread only.
This patch moves the realtime compositor out of experimental. See
T99210.
The first milestone is finished with regards to implementing most
essential nodes for single pass compositing. It is also now documented
in the manual and no major issues are known.
Differential Revision: https://developer.blender.org/D16891
Reviewed By: Clement Foucault
This patch allows the realtime compositor to be limited to a specific
compositing region that is a subset of the full render region. In the
context of the viewport compositor, when the viewport is in camera view
and has a completely opaque passepartout, the compositing region will be
limited to the visible camera region.
On the user-level, this gives the user the ability to make the result of
the compositor invariant of the aspect ratio, shift, and zoom of the
viewport, making the result in the viewport identical to the final
render compositor assuming size relative operations.
It should be noted that compositing region is the *visible* camera
region, that is, the result of the intersection of the camera region and
the render region. So the user should be careful not to shift or zoom
the view such that the camera border extends outside of the viewport to
have the aforementioned benefits. While we could implement logic to fill
the areas outside of the render region with zeros in some cases, there
are many other ambiguous cases where such a solution wouldn't work,
including the problematic case where the user zooms in very close,
making the camera region much bigger than that of the render region.
Differential Revision: https://developer.blender.org/D16899
Reviewed By: Clement Foucault
Previously when on frame 2.5 and trying to jump to a
keyframe that was on frame 2, it would instead jump past it.
Now it properly respects the subframes for that.
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D16651
Ref: D16651
The "While Held" option from the Pose Propagate Operator
doesn't do anything meaningful.
After talking with the Animation Module it was decided to remove it.
In code it was called `POSE_PROPAGATE_SMART_HOLDS`
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D16771
Ref: D16771
Ideally, we would also get variance information out of the test, but that
seems a bit more complex to implement. For now just run the test a couple
of times and average the timings.
The test now runs between 5 and 100 times, depending on how long it
to run the test once.
I noticed that sometimes the geometry nodes benchmark would not work
if there were some left-over debug prints in the code. The reason it did
not work was because the prints were mixed with the test output print.
I also tried using explicit flusing and `atexit` for printing the test output,
but that didn't solve it. Just printing additional newlines to better separate
the test output from other printed output helped though.
Using negative blend factors for blending in flipped poses was undesirable.
Instead, the pose blending operator now uses CTRL to flip the pose.
Negative blend values are still allowed, and cause the pose asset to be
subtracted from the current pose. It can quickly break the rig, but for
small adjustments it can be useful.
The slider component can now be told to not use CTRL for toggling stepped
10% increments. This is useful when the operator that uses the slider needs
that modifier key for its own purposes.
Initial error caused by 1efc94bb2f and fixed in 6a7917162c. However
the empty index files (empty as in, they contain the version number but
no assets) will have to be fixed somehow, since otherwise assets don't
show up at all for people who saved asset files in a broken version.
Delete empty index files if the modification timestamp indicates a time
when the bug was present (plus a day before and after, to address
possible time zone differences). This will basically make Blender skip
the optimization for .blend files without assets for one load, but even
then the index should still produce faster results than a completely
non-index read.
This can be removed after a while, it's just a (much needed) fix for
people who were using alpha/beta builds.
Differential Revision: https://developer.blender.org/D16678
Reviewed by: Jeroen Bakker
The use of `std::variant` allows combining the four vectors
into one which more closely matches the intend and avoids
a workaround used before.
Note that this uses `std::get_if` instead of `std::get` because
`std::get` is only available since macOS 10.14.
Issue comes from the fact that some of the image updates are handled
outside of depsgraph context (through the signal system), and therefore
completely ignored by the undo/redo code.
Now that undo/redo tries to update as little data as possible, it needs
to be aware of these changes.
As a temporary workaround, until image update is fully handled through depsgraph,
consider that IDs tagged with `ID_RECALC_SOURCE` should get their caches
cleared on undo/redo, and tag some RNA property updates of
Image/ColorSpace as such.
Reviewed By: sergey
Maniphest Tasks: T103242
Differential Revision: https://developer.blender.org/D16927
This workaround is no longer needed and prevents our OCIO configuration
from being loaded if Blender is unpacked under a Unicode path.
Differential Revision: https://developer.blender.org/D16818
Multiple improvements to UV Cylinder and UV Sphere projection including:
* New option "Pinch" or "Fan" to improve unwrap of faces at the poles.
* Support for "Polar ZY" option on "View On Equator" and "Align To Object"
* Better handling of inputs with round-off error.
* Improved handling of faces touching the unit square border.
* Improved handling of very wide quads spanning the right hand border.
* Improved accuracy near to (0, 0).
* Code cleanup and simplification.
Differential Revision: https://developer.blender.org/D16869
- Add parentheses to suppress an assertion on some compilers.
- It turns out cloth self-collision math is not precisely symmetric,
so sort the triangle index pair to restore behavior exactly identical
to the version before the new traversal.
Follow up to rB0796210c8df32
Previously cloth self-collision and other code that wants self-overlap
data was using an ordinary BVH overlap utility function. This works,
but is suboptimal because it fails to take advantage of the fact that
it is comparing two identical trees.
The standard traversal for self-collision essentially devolves into
enumerating all elements of the tree, and then matching them to the
tree starting at the root. However, the tree itself naturally partitions
the space, so overlapping elements are likely to be mostly placed nearby
in the tree structure as well.
Instead, self-overlap can be computed by recursively computing ordinary
overlap between siblings within each subtree. This only considers each
pair of leaves once, and provides significantly better locality.
It also avoids outputting every overlap pair twice in different order.
Differential Revision: https://developer.blender.org/D16915
To better estimate light contribution. Note that estimating the texture
from the IES file is still missing.
Contributed by Alaska.
Differential Revision: https://developer.blender.org/D16901
This patch adds two new panels in which users can control
offset (position, rotation, scale) by layer and by stroke number.
Use cases:
- if you want to create array of Suzannes and place them one behind
another, in 2d mode, Z depth will be wrong.
In 3d mode there will be Z fighting. With combination of stroke
and layer offset we can fight this issue without touching original drawing.
- even easier way to create 2.5d environments..
simply draw on layers and then displace them in one panel
instead fiddling with every layer individually
Possible improvements:
- add offset by material slot
- add step parameter, to allow displacing groups of N strokes.
{F13129598}
Reviewed By: mendio, antoniov
Differential Revision: https://developer.blender.org/D15106
Due an internal scale of the brush size done by grease pencil
draw tool (this scale factor cannot be removed), the size of the
radial control is not equal to the actual stroke thickness and
this makes the radial size displayed useless.
This patch adds a new property that allows to pass the
path of the tool path and this value is used to apply
the correct scale to the radial size.
Reviewed By: mendio, frogstomp, pepeland, brecht
Differential Revision: https://developer.blender.org/D16866
Use NodeTree.bl_label instead of "NodeTree" for more descriptive name.
Implemented by Iliya Katueshenock.
Differential Revision: https://developer.blender.org/D16856
Since rBcommit 74c4977a the pose library blending operator can extrapolate.
This is now also reflected in the hard min/max value of the blend factor
RNA property. The soft min/max are still -1/1 to indicate normal use.
While blending, press E to enable extrapolation / overshoot of the pose.
It will make it possible to blend in more than 100% of the pose asset.
This has the potential to completely break the rig, but it can be useful
to exaggerate poses when used with caution.
This was the case when an Annotation is also present as in the report.
Since {rB92d7f9ac56e0}, Dopesheet is aware of greaspencil/annotations
(displays its channels/keyframes, can rename their data, layers, fcurve
groupings etc.). However, the Graph Editor does not display these /
should not be aware of them.
Above commit already had issues that were addressed in the following
commits (mostly adding the new `ANIMFILTER_FCURVESONLY` to places that
dont handle greasepencil/annotations)
- {rBfdf34666f00f}
- {rB45f483681fef}
- {rBa26038ff3851}
Now in T103303 it was reported that doublicking a channel would not
select all fcurve`s keyframes anymore and this wasnt actually an issue
with that particular operator, but instead with another operator that is
also mapped to doubleclicking: the channel renaming (I assume the
keyconflict here is actually wanted behavior).
Channel renaming would not return `OPERATOR_PASS_THROUGH` here anymore
in the case nothing cannot be renamed, so we would not actually reach
the 2nd operator at all (the one selecting all keyframes).
Deeper reason for this is that the renaming operator would actually
"see" a channel that could be renamed (in the case of the report: an
annotation layer), but then cannot proceed, because the "real"
underlying data where the doubleclick happens is an fcurve...
So now exclude non-greasepencil channels in filtering as well where
appropriate by also adding `ANIMFILTER_FCURVESONLY` to the filter there.
Fixes T103303.
Maniphest Tasks: T103303
Differential Revision: https://developer.blender.org/D16871
Multiframe copy paste operations were prohibited by a block of code.
While this is understandable as it prevents confusing actions, there is a good use case to allow multiframe copy pasting.
This patch does:
- remove restricting block of code
- adds outer loops for frames both in copy and paste actions.
In copy action it will create an array of selected strokes from all selected frames
In paste action it will create new from previous copy action merged to a single frame. It will paste to all selected frames and create new frame if autokey is on and time cursor is not on any of the keyframes.
The main usecase is for creating motion smears as in examples attached. The user still need to do some actions in order to achieve desired look, such as stroke ordering and deleting excessive strokes.
{F14069747}
{F14069743}
Reviewed By: antoniov, mendio
Differential Revision: https://developer.blender.org/D16805
This issue was introduced in rB78f28b55d39288926634d0cc.
The fix is to use a `std::shared_ptr` to ensure that the `Global` will live
long enough until all `Local` objects are destructed.
This was quite a fight, some resulting notes:
* We cannot use anymore Boost packages because of a weird bug breaking
Blender debug builds and ivolving Boost, TBB and USD (see also
rB019b930d6b9c).
* OCIO, OIIO, OpenVDB and USD build options where updated to match these
from cmake libs building.
** Most notably, USD now has imaging, OIIO, OpenVDB and GL support.
Ref. T99618.
Previously, the lifetimes of anonymous attributes were determined by
reference counts which were non-deterministic when multiple threads
are used. Now the lifetimes of anonymous attributes are handled
more explicitly and deterministically. This is a prerequisite for any kind
of caching, because caching the output of nodes that do things
non-deterministically and have "invisible inputs" (reference counts)
doesn't really work.
For more details for how deterministic lifetimes are achieved, see D16858.
No functional changes are expected. Small performance changes are expected
as well (within few percent, anything larger regressions should be reported as
bugs).
Differential Revision: https://developer.blender.org/D16858
It is a part of old-standing TODO, and code which accesses
the value was commented out for many years.
Remove the field to help with an upcoming const-correctness
improvements.
To aid in debugging the case where your compiler is too old for Blender,
actually log which version CMake found.
Before, CMake would output:
```
CMake Error at CMakeLists.txt:121 (message):
The minimum supported version of GCC is 11.0.0
```
With the patch, it logs:
```
CMake Error at CMakeLists.txt:121 (message):
The minimum supported version of GCC is 11.0.0, found 10.4.0
```
This has been implemented for GCC and Clang. MSVC has been explicitly
excluded, as the version numbers used for this comparison are internal
versions and not directly usable/recognisable.
Reviewed By: LazyDodo, brecht
Differential Revision: https://developer.blender.org/D16849
Change the logic for propagating poses such that it checks keyframes
on all selected bones to determine the frame on which a pose
should be propagated to.
It then adds keyframes if they don't exist on whatever
frame the pose should be propagated to.
Reviewd by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D16654
Ref: D16654
Added a new operator that aligns selected keys on an exponential curve
Revied by Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D9479
Ref: D9479
Although viewport compositor isn't supported yet on Apple deviced the
shaderlibs are compiled. The compositor shaders uses mat3 constructor
with a single vec3 and 6 floats. This constructor wasn't defined in
metal so it failed the compilation.
This patch adds the override to mat3.
This patch adds a new "Kernel Optimization Level" dropdown menu to control Metal kernel specialisation. Currently this defaults to "full" optimisation, on the assumption that the changes proposed in D16371 will address usability concerns around app responsiveness and shader cache housekeeping.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D16514
For some reason I don't understand, the dragged link is sorted across
all the node's multi-input sockets. This leads to problems when there
are multiple sockets to sort. With this patch, I'm making the feature
work more directional.
Differential Revision: https://developer.blender.org/D16892
Reading or writing a vertex group is expensive enough that it's worth
parallelizing. On a Ryzen 3700x, in a grid of 250k vertices with
30 randomly assigned vertex groups (each to 10-50% of vertices),
I observed a 4x improvement for writing to a group and a 3x
improvement when reading their data. This significantly speeds
up nodes that create a new mesh from a mesh that had vertex groups.
Previously, this happened when the "node task" first runs, which might
not actually execute the node if there are missing inputs. Deferring the
allocation of storage and default inputs allows for better memory reuse
later (currently the memory is not reused).
Since 78f28b55d3, allocating on multiple threads is much
faster, making it a nice improvement to parallelize vertex group
operations. This patch adds multi-threading when removing a
vertex group from the "Remove Named Attribute" node.
On a Ryzen 3700x:
Before: `(Average: 15.6 ms, Min: 15.0 ms)`
After: `(Average: 8.1 ms, Min: 7.6 ms)`
Differential Revision: https://developer.blender.org/D16916
All kernel specialisation is now performed in the background regardless of kernel type, meaning that the first render will be visible a few seconds sooner. The only exception is during benchmark warm up, in which case we wait for all kernels to be cached. When stopping a render, we call a new `cancel()` method on the device which causes any outstanding compilation work to be cancelled, and we destroy the device in a detached thread so that any stale queued compilations can be safely purged without blocking the UI for longer than necessary.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D16371
If we change the radius of a point or spot lamp, we also change the area lamp size.
As shown in T102853, this is bad for animating the lamp type.
The solution is to make the property point to another member of the DNA
struct `Light`.
Differential Revision: https://developer.blender.org/D16669
The members `soft`, `bleedbias`, `bleedexp` and `contact_spread` were
deprecated in rBd8aaf25c23fa, and are no longer really used.
`soft` is only used by Collada as an extra value for exporting and
importing Blender files in collada.
`bleedexp` and `contact_spread` are only used in versioning to
initialize a default value.
Reviewed By: brecht, fclem
Differential Revision: https://developer.blender.org/D16834
Both, the guarded and lockfree allocator, are keeping track of current
and peak memory usage. Even the lockfree allocator used to use a
global atomic variable for the memory usage. When multiple threads
use the allocator at the same time, this variable is highly contended.
This can result in significant slowdowns as presented in D16862.
While specific cases could always be optimized by reducing the number
of allocations, having this synchronization point in functions used by
almost every part of Blender is not great.
The solution is use thread-local memory counters which are only added
together when the memory usage is actually requested. For more details
see in-code comments and D16862.
Differential Revision: https://developer.blender.org/D16862
This is now only an indirect dependency on shared libraries, which means
this combination is valid.
Also remove mechanism that automatically disabled WITH_BOOST if no libraries
are using it, this is no longer really helpful with shared boost libraries.
"show_expanded" did not dirty the keymap diff cache, leading to old flags
being written to the item when another item was edited.
Differential Revision: https://developer.blender.org/D13418
There are dependencies between shared libraries, and Python modules which are
always installed on Linux and macOS can use these also.
Instead of adding logic for dealing with dependencies and conditional Python
module installs, just always install everything when using precompiled
libraries. This does not affect compile time which would be the main reason to
turn off build options, and it does not affect the case where system libraries
are used.
More automatic and convenient to update existing configurations this way.
Also move into platform_old_libs_update.cmake where similar logic was put
already.
WLROOTS compositors don't run surface leave callbacks,
while this may be considered a bug in WLROOTS, neither GTK/SDL crash
so workaround the crash too.
This also fixes a minor glitch where the cursor scale wasn't updated
when changing monitor scale at run-time.
Use the same `".selection"` attribute for both curve and point domains,
instead of a different name for each. The attribute can now have
either boolean or float type. Some tools create boolean selections.
Other tools create float selections. Some tools "upgrade" the attribute
from boolean to float.
Edit mode tools that create selections from scratch can create boolean
selections, but edit mode should generally be able to handle both
selection types. Sculpt mode should be able to read boolean selections,
but can also and write float values between zero and one.
Theoretically we could just always use floats to store selections,
but the type-agnosticism doesn't cost too much complexity given the
existing APIs for dealing with it, and being able to use booleans is
clearer in edit mode, and may allow future optimizations like more
efficient ways to store boolean attributes.
The attribute API is usually used directly for accessing the selection
attribute. We rely on implicit type conversion and domain interpolation
to simplify the rest of the code.
Differential Revision: https://developer.blender.org/D16057
Finding the active view item button should only happen when it's actually
necessary, since looping through all buttons and blocks is an expensive
operation. This patch limits the search a bit more, to left clicks (the only
case that is actually handled).
This improves drawing performance in the node editor slightly,
where this was a bottleneck.
Differential Revision: https://developer.blender.org/D16882
This functionality is related only to debugging of SYCL implementation
via single-threaded CPU execution and is disabled by default.
Host device has been deprecated in SYCL 2020 spec and we removed it
in 305b92e05f.
Since this is still very useful for debugging, we're restoring a
similar functionality here through SYCL 2020 Host Task.
When pasting nodes with the shortcut or the context menu, place the
center of the selected nodes at the same position as the mouse cursor.
This should save time, and is more intuitive because the new nodes are
actually visible.
Based on a patch by Juanfran Matheu (@jfmatheu).
Differential Revision: https://developer.blender.org/D10787
The main change is returning a socket pointer instead of using two
return arguments. Also use the topology cache instead of linked lists,
references over pointers, and slightly adjust whitespace.
* Add missing constructor for squared matrix types.
* Use using instead of define for typenames.
* Add `==, !=, unary-` operators
* Catch all functional style constructors inside the regex
Always hide the area header contents when the slider UI component is used.
This prevents the slider from being drawn semi-transparently on top of
other UI elements.
Avoid saving the 'flipped' operator property of the "apply pose asset"
(`POSELIB_OT_apply_pose_asset`) operator. This caused problems: when
choosing "Apply Pose Flipped" in the asset browser, double-clicking a pose
would cause it to always be flipped.
Interactive blending of poses can now use negative factors (i.e. drag to
the left) to blend in the flipped pose.
This reverts rB6eb1c98b15bb7ea6cf184b08617f24c7afb91b6c where the F key
was used to flip the pose. That was already described as stop-gap
measure, and the new behaviour is more intuitive & direct.
Functionality over-the-shoulder reviewed by @hjalti.
Add a field `is_bidirectional` to sliders (`tSlider`). By defafult this
is `false`; when set to `true` the slider allows negative values.
The allowed ranges are now:
- No overshoot, no bidirectional: `[0, 1]`
- No overshoot, bidirectional: `[-1, 1]`
- Overshoot, no bidirectional: `[0, infinity)`
- Overshoot, bidirectional: `(-infinity, infinity)`
This will be used for the pose library blending operator, where sliding
to the right (postitive) blends as normal, and sliding to the left
(negative) flips the pose before blending.
This is part of D16858. Iterating over all field inputs allows us to extract
all anonymous attributes used by a field relatively easily which is necessary
for D16858.
This could potentially be used for better field tooltips for nested fields,
but that needs further investigation.
This is part of D16858 but is also useful for other purposes.
The changes to the node declaration in this commit allow us to figure
out which fields might be evaluated on which geometries statically (without
executing the node tree). This allows for deterministic anonymous attribute
handling, which will be committed separately. Furthermore, this is necessary
for usability features that help the user to avoid creating links that don't
make sense (e.g. because a field can't be evaluated on a certain geometry).
This also allows us to better separate fields which depend or don't depend
on anonymous attributes.
The main idea is that each node defines some relations between its sockets.
There are four relations:
* Propagate relation: Indicates that attributes on a geometry input can be
propagated to a geometry output.
* Reference relation: Indicates that an output field references an inputs field.
So if the input field depends on an anonymous attribute, the output field
does as well.
* Eval relation: Indicates that an input field is evaluated on an input geometry.
* Available relation: Indicates that an output field has anonymous attributes
that are available on an output geometry.
These relations can also be computed for node groups automatically, but that
is not part of this commit.
This was the case when done via the py-API.
Now also set active_color_attribute / default_color_attribute on newly
created attributes (in case none exist yet).
Maniphest Tasks: T103564
Differential Revision: https://developer.blender.org/D16898
Python API for moving strips to and from meta strips did not invalidate
strip lookup cache. Because of that, `SEQ_get_seqbase_by_seq()` failed
to lookup origin of strip, which resulted in crash on NULL dereference.
Invalidateion was added to functions `SEQ_edit_move_strip_to_meta()` and
`SEQ_add_meta_strip()`.
Partly a cleanup, but also iterating over spans can be faster than
linked lists. Also rewrite the multi-input socket link counting
to avoid the need for a temporary map. Overall, on my setup the changes
save about 5% (3ms) when drawing a large node tree (the mouse house file).
Small memory allocations are a bottleneck when drawing large node trees.
Avoid them by passing the socket index in the whole tree and getting the
tree from the context rather than allocating structs for the tree, node,
and socket. The performance improvement will be a few percent at most.
This was an oversight in rBdba2d828462ae22de5.
The evaluator uses multiple threads to initialize node states
but it is still in single threaded mode.
`get_main_or_local_allocator` did not return the right allocator
in this case.
During pose blending, when flipping the pose with {key F}, the pose
backup needs to be recreated. Without this, the blending wouldn't be
done properly.
F-for-flipping was introduced in rB6eb1c98b15bb7ea6cf184b08617f24
While blending poses from the pose library, press {key F} to flip the
pose.
Since rBc164c5d86655 removed the "Flip Pose" checkbox, there was no more
way to blend poses flipped.
Note that this is a bit of a stop-gap measure. The goal is to have a
bidirectional blend slider, where dragging to the left flips the pose,
and dragging to the right blends it normally.
As an optimization, dependency graph evaluation skips through
no-op nodes at the scheduling stage. However, that leaves update
flags enabled on the node, and the most problematic one is the
USER_MODIFIED flag, which get flushed to children every time
the no-op node is tagged.
This in turn can cause simulation caches downstream to be
permanently stuck in an outdated state until the depsgraph
is rebuilt and the stuck flag cleared out.
Differential Revision: https://developer.blender.org/D16868
The BONE_SEGMENTS operation node is only created if the bone is
actually a B-Bone. One location in the code wasn't checking that
before trying to create a relation.
Move some functions for transforming a span of vectors to a header
and call them from these functions, just like was done for curves
objects recently.
Resolves T102027, T102026
Differential Revision: https://developer.blender.org/D16883
Expose `BKE_pose_apply_action_blend` and a simplified pose backup system
to RNA. This will make it possible to easily create some interactive
tools in Python for pose blending.
When creating a backup via this API, it is stored on the
`Object::runtime` struct. Any backup that was there before is freed
first. This way the Python code doesn't need access to the actual
`PoseBackup *`, simplifying memory management.
The limitation of having only a single backup shouldn't be too
problematic, as it is meant for things like interactive manipulation of
the current pose. Typical use looks like:
- Interactive operator starts, and creates a backup of the current pose.
- While the operator is running:
- The pose backup is restored, so that the next steps always use the
same reference pose.
- Depending on user input, determine a blend factor.
- Blend some pose from the pose library into the current pose.
- On confirmation, leave the pose as-is.
- On cancellation, restore the backup.
- Free the backup.
`BKE_pose_apply_action_blend` is exposed to RNA to make the above
possible.
An alternative approach would be to rely on the operator redo system.
However, since for poses this would use the global undo, it can get
prohibitively slow. This change is to make it easier to prototype
things; further into the future the undo system for poses should be
improved, but that's an entire project on its own.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D16900
While the cost of creating AttributeAccessor and finding the "material_index"
attribute is not large, there's really no need to do that for each
polygon. Move the access outside of the per-polygon loop.
Move `pose_backup.cc` from `editors/armature` to `blenkernel`. This is
in preparation of an upcoming change where the pose backup is going to be
owned by the `Object`. This will need to be automatically cleared when the
object is freed, which means that `blenkernel` needs the corresponding
logic.
Technically only the freeing code could be moved, but I felt it made more
sense to keep the related code together.
No functional changes.
The "osl_texture" intrinsic was not implemented correctly. It should handle alpha
separately from color, the number of channels input parameter only counts color
channels.
There are two underlying issues which got uncovered by the report:
First, is that the poll() function for the operator was using legacy
API which is on its way of removal in the next major version release.
This part is fixed in this patch based on a patch provided by Philipp
Oeser (P3389) with the modification that the `clip` is not accessed
prior to None check. Ended up in a bit annoying one-liner, the entire
function could be refactored to use early returns.
The second issue is that the Python access to the legacy property
was wrong: need to access camera reconstruction instead of accessing
deprecated DNA field.
Some files out there (e.g. in T103441) contain face definitions with
four indices, which the importer code was not expecting. The OBJ
standard spells out up to three indices per face corner; the file in
there must be using some sort of non-standard OBJ syntax extension.
Now the code simply ignores any trailing per-face-corner data.
Similar to T98782 that was about normal indices: some files out there
are technically "wrong" since they refer to UV indices, without ever
defining any UVs. If the file does not have any UVs, simply ignore UV
indices in the OBJ face definitions. Fixes T103212.
It's confusing for users when the Dopesheet's Editor Buttons for Grease Pencil are greyed out.
{F14099985}
[[ https://blenderartists.org/t/cant-create-new-layers-in-grease-pencil-dopesheet/1353882 | Can’t create new layers in grease pencil dopesheet ]]
This is often because the 'Only Show Selected' filter is disabled. This 'requirement' does not seem to be necessary since the Dopesheet is already in Grease Pencil mode and there is an active Grease Pencil Object. It is also not apparent as to why so many Operators depend on it and unintuitive that it controls their function. The 'Only Show Selected' filter button is far away from the Operator buttons in the User Interface Header, so it's difficult to make the association.
If the 'Only Show Selected' IS absolutely required, I believe it should be closer to the DOPESHEET_HT_editor_buttons. Otherwise, I think the requirement should be removed.
Reviewed By: antoniov
Differential Revision: https://developer.blender.org/D16885
Based on suggestion from Ray molenkamp (@LazyDodo), thanks.
Also fix patching of OSL code, would not work properly when using repo
checkout instead of archive download.
Re. T99618.
- Move from blenkernel to the node editor, the only place it was used
- Use two vectors instead of ListBase
- Remove define for validating the clipboard, which shouldn't be skipped
- Comment formatting, other small cleanups to whitespace
Differential Revision: https://developer.blender.org/D16880
The geometry nodes evaluator supports "lazy threading", i.e. it starts out
single-threaded. But when it determines that multi-threading can be
benefitial, it switches to multi-threaded mode.
Now it only creates an enumerable-thread-specific if it is actually using
multiple threads. This results in a 6% speedup in my test file with many
node groups and math nodes.
When these declarations are built without the help of the special
builder class, it's much more convenient to set them directly rather
than with a constructor, etc. In most other situations the declarations
should be const anyway, so theoretically this doesn't affect safety too
much. Most construction of declarations should still use the builder.
Whenever a node group is entered during evaluation, a new compute
context is entered which has a corresponding hash. When node groups
are entered and exited a lot, this can have some overhead. In my test
file with ~100.000 node group invocations, this patch improves performance
by about 7%.
The speedup is achieved in two ways:
* Avoid computing the same hash twice by caching it.
* Invoke the hashing algorithm (md5 currently) only once instead of twice.
Geometry nodes used to log all socket values during evaluation.
This allowed the user to hover over any socket (that was evaluated)
to see its last value. The problem is that in large (nested) node trees,
the number of sockets becomes huge, causing a lot of performance
and memory overhead (in extreme cases, more than 70% of the
total execution time).
This patch changes it so, that only socket values are logged that the
user is likely to investigate. The simple heuristic is that socket values
of the currently visible node tree are logged.
The downside is that when the user changes the visible node tree, it
won't have any logged values until it is reevaluated. I updated the
tooltip message for that case to be a bit more precise.
If user feedback suggests that this new behavior is too annoying, we
can always add a UI option to log all socket values again. That shouldn't
be done without an actual need though because it takes up UI space.
Differential Revision: https://developer.blender.org/D16884
Read the selection attribute on the proper domain using implicit
interpolation rather than just using its oiginal domain that might
not match the domain of the color attribute.
Lazy-function graphs are now evaluated properly even if they contain
cycles. Note that cycles are only ok if there is no data dependency cycle.
For example, a node might output something that is fed back into itself.
As long as the output can be computed without the input that it feeds into,
everything is ok.
The code that builds the graph is responsible for making sure that there
are no actual data dependencies.
This patch adds rename popup when using Y key to switch
active layer and choosing New layer in Draw mode.
It follows https://developer.blender.org/D15092, which introduced this
for moving selected strokes to layers in Edit mode.
Reviewed By: antoniov
Differential Revision: https://developer.blender.org/D16877
OIIO: 2.4.6.0
OpenVDB: 10.0.0
OSD: 3.5.0
OCIO: 2.2.0
NOTE: Had to fight OpenVDB to force it to use 'deprecated' TBB 2020, it
really wants to use oneTBB when it can find it.
Re. T99618.
Use socket indices to keep track of logged values instead of their
identifiers. This decreases memory pressure when there are many
sockets. In cases with many cheap nodes, this can give a relatively
large improvement to overall performance. We observed a 15% increase
in a case with many math nodes and a larger increase in an experimental
softbody node setup. The log is invalidated when we add/remove/move
sockets anyway.
This is the best way I found to make building socket declarations without
the builder helper class work. Besides a vague hope for non-leaky
abstractions, I don't think there's any reason for these fields not to be
accessible directly.
Ref D16850
Fix warning generated due to the full-stop in the description message of
the property `use_auto_mask`
Property added in: rBa9cb66b856e80d0542a9ad3fec0b0fb47d28f805
Remove the option to display the real size of the cursor
and set as default. Now the cursor is displayed or not using
show_cursor option, but if it's displayed always use the real size.
This patch makes sure that each of the expand keymap entries will use consistent "invert" and "use_mask_preserve" properties.
Based on previous discussions we decided to flip the default Mask Expand behavior.
This has multiple benefited:
- The mask creation is more consistent with other masking tools (Always add to existing mask. Mask selected areas)
- It's easier to use expanding for masking face sets (Snapping with `Ctrl`) or building a mask from repeated operations
- It's less likely to mask certain areas unintentionally (Loose mesh islands)
- If the current behavior is desired for an expand operation the user can use `E` & `F` in the modal keymap (Which is less often the case).
If we want to revisit the original design of inverted masking again in the future we should do this via {T97903}.
Reviewed By: Joseph Eagar
Differential Revision https://developer.blender.org/D16434
Ref D16434
Scale texture coordiantes for square brushes by sqrt2,
proportionally to how square they are (how close
tip_roundness is to zero).
Note: this is done in `calc_brush_local_mat()`, the
result of which appears to be used exclusively for
texture mapping.
Don't allow calling Attribute Convert operator in edit mode.
Right now BMesh does not support attribute operations.
Differential Revision: https://developer.blender.org/D16864
The node doesn't support blurring boolean attributes, so avoid
compiling an implementation for boolean data.
Differential Revision: https://developer.blender.org/D16867
When converting from imesh to mesh for the final result, custom
data should be copied from ALL operands including the main mesh.
Differential Revision: https://developer.blender.org/D16854
I missed adding the "convert type/domain to mask" macros.
Also refactor slightly to split the matching attribute test to a
separate function to ease debugging and reduce duplication.
The effect of CANCELLED on the undo stack is quite obscure, and
mistakenly using it after doing some changes causes confusing
behavior. It's better to describe it explicitly in the docs.
This commit addresses that specific case related to Collection ID type,
using a band-aid fix which is hopefully safe enough.
T103062 will remain open as a TODO task for a proper fix later.
This is an obvious editing mistake introduced in 05952aa94d,
resulting in incorrect vertex coordinates used when raycasting
for internal springs with a rest shape key.
In rBfcddb7cda766 I forgot to update part of the whole diffing chain,
effectively breaking the report flags propagation from any sub-structs
of RNA IDs structs.
Remove the redundant option to disable selection in order to simplify
the tools and UI, both conceptually and internally.
It was possible to disable curves selection completely by clicking on
the active selection domain. However, that was redundant compared to
just selecting everything by pressing "A". The remaining potential use
could have been saving a selection for later, but that can be done with
more complete attribute editing tools in the future.
The color of the brush cursor is changed depending
of the mode selected.
If the mode is stroke vertex color, use vertex color, otherwise
it uses material stroke color.
On gcc 11.3, Ubuntu 22.04 the default constructor for
ColorSceneLinear4f did not zero the r,g,b,a member variables. Replacing
the empty constructor with a default constructor circumvents this
problem (compiler bug? ) even though it *should* be more or less
equivalent.
This panel showed a duplication of options that were in the main light panel and only mistakenly shows up in the workbench engine where lights should have no options.
This panel was also used by the POV-Ray add-on but that was removed recently.
This panel showed a duplication of options that were in the main light panel and only mistakenly shows up in the workbench engine where lights should have no options.
This panel was also used by the POV-Ray add-on but that was removed recently.
When drawing strokes in Grease Pencil, it was always a bit hard
to predict how thick the strokes would be, because there was
no visual reference of the thickness in the cursor.
This patch adds that visual reference. It shows the brush size
as a circle in the draw cursor.
Showing the brush size can be toggled in the Cursor menu
of the Grease Pencil draw tool.
Request in RCS with 26 upvotes for this option:
https://blender.community/c/rightclickselect/0zfbbc
On the technical side: the brush size is calculated
in 3D space and takes zoom level into account, as well as
object/layer transfrom, layer thickness change (gpl->line_change)
and thickness scale (gpd->pixfactor).
Reviewed By: mendio, antoniov
Differential Revision: https://developer.blender.org/D16851
Add required additional_info to shader using gpu_shader_point_uniform_color_aa_frag.glsl. This is the only other reference to the shader which requires the additional_info to be added.
{F14085803}
Reviewed By: #eevee_viewport, fclem
Maniphest Tasks: T103426
Differential Revision: https://developer.blender.org/D16853
This replaces the old Edit menu, creating a menu only for catalog
operators. The Undo/Redo were already working only for catalogs, so now
this is more clear.
The menu also contains the Save and New catalog operators.
Differential Revision: https://developer.blender.org/D16820
Caused by rB6514bb05ea5a.
For the remeshing, we have to make sure these names are brought over
each time a mesh is made from another in the process.
This happens when reprojecting the colors in
`BKE_remesh_reproject_vertex_paint` and also again in
`BKE_mesh_nomain_to_mesh`. A bit unsure if this should happen as deep as
in `BKE_mesh_nomain_to_mesh` (if not, this can be isolated to
`voxel_remesh_exec`), but I would assume other callers of
`BKE_mesh_nomain_to_mesh` would actually benefit from it, too?
Maniphest Tasks: T103394
Differential Revision: https://developer.blender.org/D16847
Caused by 7d7e90ca68.
When accessing context members from the windowmanager context
(`C->wm.store` which is mainly used for UI related stuff) the above
commit broke behavior in `CTX_store_ptr_lookup` in that it changed and
would **always** return NULL if no type is passed in. The call to
`CTX_store_ptr_lookup` from `ctx_data_get` **always** passes in NULL
though.
Accessing other context members survived since they take a different
code path in `ctx_data_get` and dont use `CTX_store_ptr_lookup`.
Now also return the entry if a NULL type was passed as it was before.
Fixes T103370, T103405, T103417
Differential Revision: https://developer.blender.org/D16840
Until now the owner spaces in the object constraint properties used the
same descriptions as the target spaces, unlike bone constraints.
For instance, if you chose World Space as owner space, you'd get the
description: "The transformation of the target is evaluated relative to
the world coordinate system".
Reuse the existing descriptions from the bone constraints instead, so
now you get: "The constraint is applied relative to the world coordinate
system".
Reviewed By: sybren
Maniphest Tasks: T43295
Differential Revision: https://developer.blender.org/D16747
Convert 3D point shader fragment color from sRGB space to framebuffer space to match 3D line shader.
Reviewed By: fclem
Maniphest Tasks: T97394
Differential Revision: https://developer.blender.org/D16831
Make the "Clear Motion Paths" operators more intuitive. Previously, the
only way to clear the motion path of the selected object/bone would be
to shift-click the "Clear ALL Motion Paths" button. Now there are two
"X" buttons, one for "selected" and one for "all".
The "Clear Selected" and "Clear All" buttons align with the
corresponding "Update Selected" and "Update All" buttons.
When building without WITH_WINDOWS_BUNDLE_CRT the manifest
did not contain the blender.shared dependentAssembly leading
to missing dll errors at blender startup.
(MacOS) only: In the System tab of the user preferences the user has the
ability to select a GPU backend that Blender will use. After changing
the GPU backend setting, the user has to restart Blender before the
setting is used.
It was added to start collecting feedback on the Metal backend without
using the command lines.
By default Blender will select OpenGL as backend. When Metal is selected
(via `--gpu-backend metal` or via user preferences) OpenGL will be used as
fallback when the platform isn't capable of running Metal.
Separate the "insert nodes into group" operation into more distinct
phases. This helps to clarify what is actually happening, to avoid
redundant updates to group nodes every time a new socket is discovered,
and to make use of the topology cache to avoid the "accidentally
quadratic" alrogithms that we have slowly been removing from node
editing.
The change is motivated by the desire to use dynamic node declarations
for group nodes and group input/output nodes, where it is helpful to
avoid updating the declaration and sockets multiple times.
Use the map created for copying nodes more instead of iterating over all
nodes unnecessarily a few times. Use the map empty check instead of
a separate boolean variable. Use a utility function to retrieve a
separate buffer of selected nodes in case the nodes by id Vector
is reallocated (that part is technically a fix).
This enable building the metal backend by default on Apple hardware.
This is needed for further testing and the new backend selector D16774.
Ref T96261
Global scope arrays can incur suboptimal per-shader-thread memory allocations, resulting in excessive usage of limited local memory resources. These changes ensure that any arrays are limited to the closest scope in which they are required and thus will get correctly optimized by the compiler.
A number of constants have also been replaced with Macro's as these can result in better runtime performance for complex shader code.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D16825
Propagate `eRNAOverrideMatchResult` 'return' flags at higher level into
BKE API, instead of just returning a boolean true when new override
rules have been created.
NOTE: This is an intermediary step towards fixing T102766.
Differential Revision: https://developer.blender.org/D16761
This was harmless because the function would just return null in release
builds, which was checked. Theoretically this vertex group mapping
shouldn't depend on the object type, but the vertex group API would
have to move away from the object-level first.
These are meant to be regression tests, not fuzz tests. The "random"
shuffling made debugging quite annoying, even though the random order
was the same every time. Instead, hard-code the two lists to make
things more obvious. The resulting list doesn't make much sense
(for example, the multires modifier has to be first in the stack),
but for now avoid changing things further.
Also remove some comments that weren't helpful.
Previously, the same `FieldInferencingInterface` was build for every node
multiple times. Now only once during the inferencing. Going forward,
it would be even better to store the inferencing interface as part of the
node declaration to avoid building it during inferencing at all.
A number of paths resulted in compilation errors after porting EEVEE to use Create-Info. Namely the fallback path for cubemap support. A number of other strict compilation failures regarding format comparison also required fixing when this mode is enabled.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261, T103313
Differential Revision: https://developer.blender.org/D16819
Add documentation for `BKE_id_defgroup_list_get()` and document that
`CD_MDEFORMVERT` mesh layers contain `MDeformVert` structs.
No functional changes.
The Metal backend already supports output for the 6 clipping planes via gl_ClipDistances equivalent, however, functionality to toggle clipping plane enablement was missing.
Authored by Apple: Michael Parkin-White
Ref T96261
Depends on D16777
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D16813
Line Loop topology support for cutting tool and add support for packing several vertex attributes across individual pixels within a texture buffer.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D16783
- Support for non-contiguous shader resource bindings for all cases required by create-info
- Implement missing geometry shader alternative path for edit curve handle.
- Add support for non-float dummy textures to address all cases where default bindings may be required.
Authored by Apple: Michael Parkin-White
Ref T96261
Depends on D16721
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D16777
The Realtime Compositor crashes on undo after an operation like Dissolve
node.
The compositor evaluator stored a reference to the compositor node tree
assuming that it will always be valid. This is not guaranteed, however,
and changes to the node tree can invalidate that reference. So we get
the node tree from the context directly every time to fix the crash.
Such IDs are tagged with the new `LIB_TAG_RUNTIME`. They are essentially
like any other regular ID, except that they do not get written in .blend
files. They also do not make their linked data usages directly linked.
They do be written in undo steps however.
This tag should be ignored in any non-Main IDs (e.g. evaluated data,
`NO_MAIN`, etc.).
This commit also adds a new RNA ID property, `is_runtime`. This is not a
direct mapping to the DNA tag, as a non-main ID will also return True,
and the property is only editable for Main IDs.
Some basic testing for expected behavior of that new tag was also added
to `blendfile_io` py unittest.
Required for brush asset project, see T101908.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D16675
ID tags were fully cleared on file write, however some should be written
so that they are preserved accross undo steps.
Currently this likely did not cause any serious issue, as the missing
ones were not that critical.
When creating a new mesh to change it in some way, the active and
default color attribute names should be copied to the new mesh.
Doing that in the generic "copy parameters for eval" function should
cover the vast majority of cases.
Accessing a mesh with write access can be costly if it is used
elsewhere at the same time because of copy-on-write. When always did
that at the end of the modifier calculation, but it's trivial to only
do that when we might need actually use the mesh to add original
index layers.
Caused by b08301c865. This also contains an optimization
compared to the previous version to avoid recalculating normals when
the entire mesh has moved by the same offset.
Reported by Demeter in chat.
This reverts commit a3a9459050.
And fixes T103337.
a3a9459050 has some flaws and it needs to go through review (See D16803).
Conflicts:
intern/ghost/intern/GHOST_SystemWin32.cpp
This was due to a missing endpoint case that wasn't handled in the port.
The last point still have to be discarded manually because of the
dot/stroke setting of the material.
The first test `ma1.x == -1` is not necessary anymore since the index
buffer do not contain this point (which was rendered using instance
rendering before.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D16812
Unlike other (closed) hierarchies, view layers dont show their contents
next to their names.
Code would still find the item via outliner_find_item_at_x_in_row though,
this is now prevented (same as if the viewlayer was open [instead of
collapsed]).
Fixes T102357.
Maniphest Tasks: T102357
Differential Revision: https://developer.blender.org/D16662
This patch implements the Streaks Glare node. Which is an approximation
to the existing implementation in the CPU compositor. The difference due
to the approximation is bearily visible in artificial test cases, but is
less visible in actual use cases. Since the difference is rather similar
to that we discussed in the Simple Star mode, the decision to allow that
difference would probably hold here.
For the future, we can look into approximating this further using a
closed form IIR recursive filter with parallel interconnection and
block-based parallelism. That's because the streak filter is already
very similar to the causal pass of a fourth order recursive filter,
just with exponential steps.
Differential Revision: https://developer.blender.org/D16789
Reviewed By: Clement Foucault
This patch implements the variable size mode of the blur node. This is
not identical to the CPU implementation, but is visually very close.
That's because of two things. First, the Extend Bounds option introduces
a 2px offset that doesn't make sense, which is likely a bug in the CPU
implementation. Second, the CPU implementation approximate the result
using three passes, the first two of which are separable morphological
operators applied on the size input. But this approximation does not
provide an advantage because the last pass is non-separable anyways. So
the GPU implementation does not attempt this approximation for more
accurate and faster results.
Differential Revision: https://developer.blender.org/D16762
Reviews By: Clement Foucault
This simplifies some memory management, ammortizes some of the many
small allocations when building UI layouts, and simplifies the code
that deals with the groups. `uiBlock` is no longer a trivial type.
In my testing this saved a few ms when drawing a large node tree.
Duplicating context lists took a measurable amount of time when drawing
large node trees in the node editor. Instead of using a linked list of
entries, which results in many small allocations, use a vector. Also,
use std::string and StringRefNull instead of char buffers and pointers.
I had forgotten about curves sculpt mode when I wrote
this function. It just initializes the viewport
pivot point to the evaluated object bounding box.
Should be used inside the mode entry function.
Texpaint now bounds checks material indices when looking up
materials, in case the user has corrupted the material_index
attribute somehow. We may wish to report this to the user
somehow on entering texture paint mode.
Partially addresses T72011.
The problem here is that the previous barycentric clamping did not deal well
with skinny triangles and would end up generating "sub-pixel jittering"
locations that were actually >20 pixels away.
Differential Revision: https://developer.blender.org/D16727
Previously, the code tried to keep node groups working even if some of
their input/output sockets had undefined type. This caused some
complexity with no benefit because not all places outside of this file
would handle the case correctly. Now node groups with undefined
interface sockets are disabled and have to be fixed manually before
they work again.
Undefined interface sockets are mostly caused by invalid Python
API usage and incomplete forward compatibility (e.g. when newer
versions introduce new socket types that the older version does
not know).
Avoid utility function call that would query the file system, this was a
bottleneck. The path joining was also problematic. See patch for more
details.
Differential Revision: https://developer.blender.org/D16768
Reviewed by: Jacques Lucke
Expands Color Mix nodes with new Exclusion mode.
Similar to Difference but produces less contrast.
Requested by Pierre Schiller @3D_director and
@OmarSquircleArt on twitter.
Differential Revision: https://developer.blender.org/D16543
Materials without connections to the output node would crash with OSL
in OptiX, since the Cycles `OSLCompiler` generates an empty shader
group reference for them, which resulted in the OptiX device
implementation setting an empty SBT entry for the corresponding direct
callables, which then crashed when calling those direct callables was
attempted in `osl_eval_nodes`. This fixes that by setting the SBT entries
for empty shader groups to a dummy direct callable that does nothing.
Switching viewport denoising causes kernels to be reloaded with a new
feature mask, which would destroy the existing OptiX pipelines. But OSL
kernels were not reloaded as well, leaving the shading pipeline
uninitialized and therefore causing an error when it is later attempted to
execute it. This fixes that by ensuring OSL kernels are always reloaded
when the normal kernels are too.
Restrict the condition under which paint cursors read use the cursor
location from the the operating-system.
This caused a glitch when dragging UI elements in painting context
popup. Since the paint cursor would display using mouse motion
which was clamped to the window center - an internal detail of hidden
cursor grabbing.
Now only read the cursor coordinates when clamped to a region which
is used for the transform cursor to stay visible even when the cursor
wraps around.
Recent reverting of changes to cursor grabbing intended to match
Blender 3.3 release. This is the case for 3.4x branch, however there is
an additional change to grabbing on WIN32 by Germano [0] which is a
significant improvement on old grabbing logic for Windows.
So instead of matching 3.3x behavior, restore logic that keeps
the cursor centered while grabbing & hidden.
This re-introduces T102792 issue displaying the paint-brush while
dragging buttons, this will have to be solved separately.
Re-apply [1] & [2], revert [3] & [4].
[4]: a3a9459050
[0]: 9fd6dae793
[1]: 4cac8025f0
[2]: 230744d6fd
[3]: 0240b89599
The paint cursor was continuously set which meant hiding the cursor
while interacting with buttons would immediately show it again.
This exposed cursor warping.
Small roundoff errors during UV editing can sometimes occur, most likely
due to so-called "catastrophic cancellation".
Here we set a tolerance around zero when using Constrain-To-Bounds and UV Scaling.
The tolerance is set at one quarter of a texel, on a 65536 x 65536 texture.
TODO: If this fix holds, we should formalize the tolerance into the UV editing
subsystem, perhaps as a helper function, and investigate where else it needs
to be applied.
Differential Revision: https://developer.blender.org/D16702
When migrating to the new packing API, pin_unselected was not
implemented correctly.
Regression from rB143e74c0b8eb, rBe3075f3cf7ce, rB0ce18561bc82.
Differential Revision: https://developer.blender.org/D16788
Reviewed By: Campbell Barton
Duplicated in blender-v3.4-release as rB3dcd9992676a
Upon conversion, the newly-created UV map with default name "UVMap"
should be translated.
Reviewed By: mont29
Maniphest Tasks: T103183
Differential Revision: https://developer.blender.org/D16775
Replace ../lib/linux_centos7_x86_64 with ../lib/linux_x86_64_glibc_228,
built with Rocky8 Linux, compatible with the VFX platform CY2023,
see: T99618.
- Update build-bot configuration.
- Remove unnecessary check for Blosc, this is part of OpenVDB lib now.
- Remove WITH_CXX11_ABI, always use new C++11 ABI now
- Replace centos7 by glibc_228 everywhere
Note that existing builds with cached paths pointing to
"../lib/linux_centos7_x86_64" will need to be updated.
Includes contributions by Brecht.
Attributes are unifying around a name-based API, and we would like to
be able to move away from CustomData in the future. This patch moves
the identification of active and fallback (render) color attributes
to strings on the mesh from flags on CustomDataLayer. This also
removes some ugliness used to retrieve these attributes and maintain
the active status.
The design is described more here: T98366
The patch keeps forward compatibility working until 4.0 with
the same method as the mesh struct of array refactors (T95965).
The strings are allowed to not correspond to an attribute, to allow
setting the active/default attribute independently of actually filling
its data. When applying a modifier, if the strings don't match an
attribute, they will be removed.
The realize instances / join node and join operator take the names from
the first / active input mesh. While other heuristics may be helpful
(and could be a future improvement), just using the first is simple
and predictable.
Differential Revision: https://developer.blender.org/D15169
If the resulting geometry from applying a geometry nodes modifier
contains no mesh, give an error message. This gives people something to
search and makes the behavior more purposeful.
Also remove the `modifyMesh` implementation from the geometry nodes
modifier, since it isn't necessary anymore. And remove the existing
"Modifier returned error, skipping apply" message which was cryptic
and redundant if applying returns an actual error message.
Resolves T103229
Differential Revision: https://developer.blender.org/D16782
This patch allows skipping the automatic insertion of nodes on top of
links when the transform operator ends. When putting nodes into small
spaces this often gets in the way and wastes time. Now, when holding
`alt`, this is turned off.
The header text is also improved to add this shortcut and to remove
the Dx and Dy values and improve the formatting a bit.
Making this functionality optional might allow us to use it in more
places in the future, like for the nodes added by link-drag-search.
Differential Revision: https://developer.blender.org/D16230
The function was highly related to the apply modifier operator,
and only used once. This was too specific to be in the blenkernel,
especially in a mesh conversion file.
This was missing some paths setup in the environment, ctest
normally sets this up before running the tests from the CLI
but that does not help the IDE all that much.
After switching over to using start_frame / end_frame, scaling an NLA strip didn't scale the strip, it just repeated the action.
Now withing the NLA transform code, we look for TFM_TIME_EXTEND / TFM_TIME_SCALE transform mode, and handle the update to strip scale accordingly
Since rB8014180720d8, all paint modes support orbiting around last
stroke, so [a] the comment there is out of date and [b] the fallback
case of orbiting around the center will never be used (unless there is
no stroke information - but BKE_paint_stroke_get_average handles that
anyways).
Spotted while looking into T101766.
Maniphest Tasks: T101766
Differential Revision: https://developer.blender.org/D16779
The problem was the bake function was using the evaluated
data and must use the original data.
The problem was caused by commit: rBcff6eb65804d: Cleanup: Remove duplicate Bake modifier code.
Fix by Philipp Oeser
Editmode should display the original (non-evaluated) points unless there
is something like an "On Cage" option of a modifier [which none of the
curves modifiers have].
This was not the case since the introduction in rBe15320568a29.
So we now draw the editpoints from the original curves. This also means
that original and evaluated curves might not have the same number of
points, so we have to get independent of `proc_point_buf` since that
would possibly create vertexbuffers of different sizes (compared to the
original curves) which is not allowed for a single batch.
- remove the "pos" alias from the vertex buffer format of proc_point_buf
- instead, create a new "edit_points_pos" vertex buffer
- fill that with the original (un-evaluated) curves positions
- dont request `proc_point_buf` anymore
- rename the editpoints flags buffer to be more consistent
And since original and evaluated points might also be in completely
different positions, we also need to draw connecting lines between those
editpoints to not have them float in thin air. For drawing these in
editmode, a simple polyline was chosen (instead of drawing lines in a
resolution that is take from the old particle system -- which is not
depending on points even but has a hardcoded resolution that can only be
upped by the hair_subdiv scene render setting)
- create appropriate batch and indexbuffer for this
- positions vertex buffer can be reused
- reuse particle edit shader (instead of curve edi shader) to get
segment highlighting
{F14055436}
NOTE: this also removes the broken depth handling and instead makes it
work (also XRay is properly taken into account) by binding the correct
overlay framebuffer.
NOTE: to further clarify the distinction between curves drawing (that is
based on the old partice system drawing) and drawing in editmode, the
corresponding vertexbuffers have been moved out of CurvesEvalCache into
CurvesBatchCache directly.
NOTE: drawing the lines in editmode could be improved (taking the "real"
resolution of splines into account, but since this should happen on the
GPU in a compute shader, this is for later)
Potentionally fixes T101889.
Maniphest Tasks: T101889
Differential Revision: https://developer.blender.org/D16281
Under Wayland the transform cursor wasn't displaying the warped cursor.
This worked on other platforms because cursor motion is warped where as
Wayland simulates cursor warping, so it's necessary to apply warping
when requesting the cursor location too.
- Use typed enum for the wrap axis.
- Rename `bounds` to `wrap_region`.
- Take a `rcti` argument instead of an `int[4]`.
- Pair wrap & wrap_region arguments together.
This is an alternative fix to [0] which kept the cursor centrally
located as part of GHOST cursor grabbing which caused T102792.
Now this is done as part of walk mode as it's the operator that most
often ran into this problem although ideally this would be handled by
GHOST - but that's a much bigger project.
[0]: 9fd6dae793
Historically checks for windowing capabilities used platform
pre-processor checks however that doesn't work when Blender is built
with both X11 & Wayland.
Add a capabilities flag which can be used to check which functionality
is supported. This has the advantage of being more descriptive/readable.
This reverts commits
9fd6dae793,
4cac8025f0 (minor cleanup).
Re-introducing T102346, which will be fixed in isolation.
Unfortunately even when the cursor is hidden & grabbed,
the underlying cursor coordinates are still shown in some cases.
This caused bug where dragging a button in the sculpt-context popup
would draw the brush at unexpected locations because internally
the cursor was warping in the middle of the window, reported as T102792.
Resolving this issue with the paint cursor is possible but tend towards
over-complicated solutions.
Revert this change in favor of a more localized workaround for walk-mode
(as was done prior [0] to fix T99021).
[0]: 4c4e8cc926
This was only called once in a situation where such functions
are typically used as a dynamic enum callbacks.
Prefer keeping the items close to the EnumProperty definition &
avoid the need to note why this is a special case that doesn't follow
the common pattern for enum callbacks.
- Follow sphinx conventions for doc-strings.
- Use __slots__ for KeyframesCo as dynamically assigning new members
isn't needed.
- Import from bpy.types instead of assigning.
- Split typing imports across multiple lines as they tend to become
quite large.
This is a solution in response to the issues mentioned in comments on
rBe4f1d719080a and T103088.
Apparently the workaround of checking if the mouse is already inside
the area on the next event doesn't work for some tablets.
Perhaps the order of events or some very small jitter is causing this
issue on tablets. (Couldn't confirm).
Whatever the cause, the solution of checking the timestamp of the event
and thus ignoring the outdated ones is theoretically safer.
It is the same solution seen in MacOS.
Also calling `SendInput` 3 times every warp ensures that at least one
event is dispatched.
This adds a new mirror image extension type for shaders and
geometry nodes (next to the existing repeat, extend and clip
options).
See D16432 for a more detailed explanation of `wrap_mirror`.
This also adds a new sampler flag `GPU_SAMPLER_MIRROR_REPEAT`.
It acts as a modifier to `GPU_SAMPLER_REPEAT`, so any `REPEAT`
flag must be set for the `MIRROR` flag to have an effect.
Differential Revision: https://developer.blender.org/D16432
The `render_color_index` skips attributes with different types
and domains in order to give the proper order for the UI list.
That is a different than an index in the group of all attributes.
The most solid solution I could think of is exposing the name of
the default color attribute. It's "solid" because we always address
attributes by name internally. Doing something different is bound
to create problems. It's also aligned with the design in T98366 and
D15169.
Another option would be to change the way the "attribute index"
is incremented in Cycles. That would be a valid solution, but would
be more complex and annoying.
For consistency, I also exposed the name of the active color attribute
the same way, though it isn't necessary to fix this particular bug.
The properties aren't editable, that can come in 3.5 as part of D15169.
Differential Revision: https://developer.blender.org/D16769
This is essentially a left-over from the initial transition to fields where this was
forgotten. The mesh primitive nodes used to create a named uv map attribute
with a hard-coded name. The standard way to deal with that in geometry nodes
now is to output the attribute as a socket instead. The user can then decide
to store it as a named attribute or not.
The benefits of not always storing the named attribute in the node are:
* Improved performance and lower memory usage when the uv map is not
used.
* It's more obvious that there actually is a uv map.
* The hard-coded name was inconsistent.
The versioning code inserts a new Store Named Attribute node that
stores the uv map immediatly. In many cases, users can probably just
remove this node without affecting their final result, but we can't
detect that.
There is one behavior change which is that the stored uv map will be
a 3d vector instead of a 2d vector which is what the nodes originally created.
We could store the uv map as 2d vector inthe Store Named Attribute node,
but that has the problem that older Blender versions don't support this
and would crash immediately. Users can just change this to 2d vector
manually if they don't care about forward compatibility.
There is a plan to support 2d vectors more natively in geometry nodes: T92765.
This change breaks forward compatibility in the case when the uv map
was used.
Differential Revision: https://developer.blender.org/D16637
This is done based on the render sample count so that it doesn't impact
sampling quality. It's similar in spirit to the adaptive table size in D16561,
but in this case for performance rather than memory usage.
Differential Revision: https://developer.blender.org/D16726
The first two dimensions of scrambled, shuffled Sobol and shuffled PMJ02 are
equivalent, so this makes no real difference for the first two dimensions.
But Sobol allows us to naturally extend to more dimensions.
Pretabulated Sobol is now always used, and the sampling pattern settings is now
only available as a debug option.
This in turn allows the following two things (also implemented):
* Use proper 3D samples for combined lens + motion blur sampling. This
notably reduces the noise on objects that are simultaneously out-of-focus
and motion blurred.
* Use proper 3D samples for combined light selection + light sampling.
Cycles was already doing something clever here with 2D samples, but using
3D samples is more straightforward and avoids overloading one of the
dimensions.
In the future this will also allow for proper sampling of e.g. volumetric
light sources and other things that may need three or four dimensions.
Differential Revision: https://developer.blender.org/D16443
While it helps on many scenes, it can be disruptive for existing scenes and
for benchmarks the differences in timing can be confusing. So be a bit more
conservative and only it enable it for new scenes.
This allows choosing the 2d vector type in the Store Named Attribute
node. Similar to byte-colors, there is not a special socket type for this
(currently). In geometry nodes itself, vectors are all still 3d.
The "Loading Asset Libraries" label in the menu would already disappear
before the asset libraries are done loading. It only queried if the
loading was started, not if it was finished. Especially notable when the
asset library was slow to load, e.g. because it is not yet in the asset
index.
The use of a struct for device strings caused the CUDA compiler to
generate byte arrays as the argument type, whereas OSL generated
primitive integer types (for the hash). Fix that by using a typedef
instead so that the CUDA compiler too will use an integer type in the
PTX it generates.
Maniphest Tasks: T101222
This is because OB_MODE_SCULPT_CURVES is not part of OB_MODE_ALL_PAINT
(yet). While there is some chance it ends up there, there are a lot of
more places that need checking and so patch only fixes the report very
isolated.
NOTE: T93501 is related (since the option to show these should also be
hidden in sculptmode)
Maniphest Tasks: T101765
Differential Revision: https://developer.blender.org/D16764
Allow keyboard layouts which include "dead keys" to enter diacritics
by calling MapVirtualKeyW even when not key_down.
See D16770 for more details.
Differential Revision: https://developer.blender.org/D16770
Reviewed by Campbell Barton
Recently a new geometry node for splitting edges was added in D16399.
However, there was already a similar implementation in mesh.cc that was
mainly used to fake auto smooth support in Cycles by splitting sharp
edges and edges around sharp faces.
While there are still possibilities for optimization in the new code,
the implementation is safer and simpler, multi-threaded, and aligns
better with development plans for caching topology on Mesh and other
recent developments with attributes.
This patch removes the old code and moves the node implementation to
the geometry module so it can be used in editors and RNA. The "free
loop normals" argument is deprecated now, since it was only an internal
optimization exposed for Cycles.
The new mesh `editors` function creates an `IndexMask` of edges to
split by reusing some of the code from the corner normal calculation.
This change will help to simplify the changes in D16530 and T102858.
Differential Revision: https://developer.blender.org/D16732
Fixed more cases where attributes weren't being reinitialized
on switching PBVH mode:
* When PBVH_GRIDS and PBVH_BMESH force attributes into simple
array mode they no longer override simple_array in the
SculptAttributeParams parameters, instead they set a field
in SculptAttribute itself. Thus if the attribute is
reinitialized in another mode it won't retain the simple_array
parameter.
* sculpt_attribute_ensure_ex now calls sculpt_attr_update if
the attribute already exists.
* Fixed a bug from a couple commits ago that set
SculptAttribute.data_for_bmesh wrong.
PBVH draw code now builds coarse triangle index buffers
for multires. Note that the coarse grids can be at any
multires depth but is currently hardcoded to 1.
Previously the sculpt box trim operator always created face sets,
but after face sets became optional it only modified them if they
already existed. Absent a better way to turn the behavior on and off,
the fix is to just always create face sets.
Before f1c0249f34 the material was assigned to the previous
slot rather than the next. Though the behavior is arbitrary, there
is no reason to change it.
The `transform_convert_clip_mirror_modifier_apply` code is made more readable by:
- decreasing indentation;
- removing `axis` and `tolerance` variables;
- renaming `int clip` to `bool is_clipping`;
The comment of `solve_cubic()` put the coefficients of the to-be-solved
cubic equation in the wrong order. This is now fixed.
No functional change, just a comment fix.
When the line was very thin the precision of the thickness
calculation was not precise enough.
The algorithm has been improved. This affects SVG and PDF.
* Make it clearer that contrib isn't shipped with releases, by already excluding it in beta.
* Improve the UI by hiding the "Testing" enum item in these case.
Differential Revision: https://developer.blender.org/D16729
In preparation to sanatize the mask texture and color texture in sculpt code. In sculpt
mode the mask texture is read from mtex, leaving the mask_mtex when we want to use color
textures in sculpt mode.
Having all packages on one line made reviewing changes difficult.
Also note why Python modules are needed (with some TODO's where I wasn't
able to find any reason given for their inclusion).
The PKGCONFIG file exposes the OPUS include: requiring <opus/opus.h>
to be replaced with <opus.h>. Manipulate the PKGCONFIG file instead of
patching the source since the small change is only needed in one place.
Meson is built as part of external_python_site_packages,
without this dependency it would be called before being built.
Also remove Meson as a build requirement since the version is used.
Adds an early return if Position/Offset inputs won't lead
to any changes in the Geometry.
It now also compares with the read-only Position attribute instead of
getting it for write only, to work correctly with Copy-on-Write.
Before, the `is_same`-check only worked for geometry created
in the node tree.
Differential Revision: https://developer.blender.org/D16738
There has been an attempt to reorganize this part, however, it seems that didn't compile on HIP, and is reverted in
rBc2dc65dfa4ae60fa5d2c3b0cfe86f99dcb5bf16f. This is another attempt of refactoring. as I have no idea why some things don't work on HIP, it's
best to check whether this compiles on other platforms.
The main changes are creating a new struct named `MeshLight` that is shared between `KernelLightDistribution` and `KernelLightTreeEmitter`,
and a bit of renaming, so that light sampling with or without light tree could call the same function.
Also, I noticed a patch D16714 referring to HIP compilation error. Not sure if it's related, but browsing
https://builder.blender.org/admin/#/builders/30/builds/7826/steps/7/logs/stdio, it didn't work on gfx1102, not gfx9*.
Differential Revision: https://developer.blender.org/D16722
The OpenVDB delay loading of voxel leaf data using mmap works poorly on network
drives. It has a mechanism to make a temporary local file copy to avoid this,
but we disabled that as it leads to other problems.
Now disable delay loading entirely. It's not clear that this has much benefit
in Blender. For rendering we need to load the entire grid to convert to NanoVDB,
and for geometry nodes there also are no cases where we only need part of grids.
To avoid issues with lights being either skipped or sampled unnecessarily
when the exposure is set low or high.
Contributed by Alaska.
Differential Revision: https://developer.blender.org/D16703
* preempt_attr was copied from CUDA, but not used in HIP.
* Remove shadowed variable before conditional in EnvironmentTextureNode code.
Differential Revision: https://developer.blender.org/D16741
Expand the motion path frame range options with an extra option "Manual
Range". When chosen, Blender will not automatically update the path
range any more.
Additionally, the start/end frame fields are greyed out in the UI when
one of the automatic range options is selected (i.e. all but the new
"Manual Range" one). It is still possible to set the start/end frame
temporarily, but the original behaviour (of recomputing those on update)
remains.
Manifest Task: T101522
The catalog tree is a unit on its own, and should be tested separately.
This makes the testing files smaller and more focused, which can help
maintaining them.
This manages setting up asset library directories for testing, which is
useful for testing multiple asset library related compontents. So move
it to a common header. No reason to squeeze everything into one file
then.
Compile each static shader using shaderc to Spir-V binaries.
The main goal is to make sure that the GLSL created using ShaderCreateInfo and able to compile to Spir-V.
For the second stage a correct pipeline needs to be created and some shader would need more
adjustments (push constants size).
With this patch future changes to GLSL sources can already be checked against vulkan, without the
backend finished.
Mechanism has been tested using MacOS and MoltenVK. For other OS, we should finetune CMake
files to find the right location to shaderc.
```
************************************************************
*** Build Mon 12 Dec 2022 11:08:07 CET
************************************************************
Shader Test compilation result: 463 / 463 passed (skipped 118 for compatibility reasons)
OpenGL backend shader compilation succeeded.
Shader Test compilation result: 529 / 529 passed (skipped 52 for compatibility reasons)
Vulkan backend shader compilation succeeded.
```
Reviewed By: fclem
Maniphest Tasks: T102760
Differential Revision: https://developer.blender.org/D16610
Previously, it wouldn't detect the case when one mesh had an attribute
that the other one did not. Not sure if this always was the case or whether
this less strict test was implemented accidentally at some point.
But it below the `else` case to make the control flow clearer, since
in the end that is more important. Also clarify the wording and fix
grammar slightly.
Similar to previous commits, avoid using pointers that are redundant
to their corresponding index. Also avoid storing the edge vectors stack
in the data-per-loop when it can just be a function argument.
Face corner normals are calculated when auto smooth or custom
per-corner normals are used.
This brings the per-face-corner data from 64 to 24 bytes, as measured by
`sizeof`. In a large test file I observed a 20% performance improvement,
from 285 to 239 ms.
The loop was also retrievable with the index. This needed some care
though, because previously the index became "detached" from the
corresponding MLoop pointer for a short time.
Since face corner indices are available, using pointers to MLoop and
other data is redundant. Using fewer local variables means there is less
state to keep track of when reading the algorithm, even if it requires
more characters in some cases.
The `lnor` pointer was only used for fans containing a single face,
and can be retrieved for a specific loop from the common data anyway.
Also saves 8 bytes per corner during the calculation
Add `bNode::index()` to allow accessing node indices directly without
manually de-referencing the runtime struct. Also adds some asserts to
make sure the access is valid and to check the nodes runtime vector.
Eagerly maintain the node's index in the tree so it can be accessed
without relying on the topology cache.
Differential Revision: https://developer.blender.org/D16683
This adds an explicit post processing step to node declarations.
The purpose of this is to keep the actual node declaration functions
concise by avoiding to specify redundant information. Also it improves
the separation of the creation of the declaration from using it.
This made it harder to change these functions in the future.
No functional changes are expected and the versioning worked correctly
in my test with a files created in Blender 2.69.
Adding the sockets in the function was not necessary in my test, because
those were already added before as part of `node_verify_sockets` in
`ntreeBlendReadLib`. I kept it in just to be on the safe side.
The problem was the bounding box was calculated using
all strokes, but if a filter is added, the bounding box must
include only selected strokes.
Fix by @frogstomp
Improve a few messages, but mostly fix typos in many areas of the UI.
See inline comments in the differential revisiion for the rationale
behind the various changes.
Differential Revision: https://developer.blender.org/D16716
Using a cache greatly simplifies access to the output node.
I touched on the most common and understandable cases for me.
The texture nodes were touched because it looked pretty generic.
Differential Revision: https://developer.blender.org/D16699
Add preferred domain based on the "Value" input field. Most often,
the domain must match the original domain for the value.
Differential Revision: https://developer.blender.org/D16730
Apple notarization rejects packages containing them.
Similar to rpaths we handle generically this as part of the harvest step rather
than patches individual library builds systems.
Ref T99618
This allows using the "On Cage" feature in edit mode to interact with
original mesh elements via the newly created geometry. The original
indices are only set for new elements that copy attribute values
from original elements directly, so it can also be a helpful way
to visualize attribute propagation.
The change was simplified by refactoring the individual mode slightly
to create separate index maps for the new edges and vertices. That
simplified attribute copying a bit too.
This is partially a bug fix, since the original index layer wasn't
handled at all before, and could be left initialized. That was caused
by my recent change to modify a mesh in place rather than create a
new one. Also copy over any orco data, which was another unhandled
layer type.
It's also a new feature though, since it allows using the "On Cage"
feature of edit mode to adjust original mesh elements by selecting
the new ones. This brings the functionality inline with the Edge Split
modifier.
- Added comment for additional tasks to do when bumping python
- updated sqlite to 3.39.4
- downgrade setuptools to 63.2.0 to avoid numpy build issues
- numpy 1.23.5
Don't use the same "context" struct for tagging sharp edges from auto-
smooth / poly flags and actually calculating face corner normals. That
required more arguments, and it required breaking const slightly to
reuse the code. Also split apart pre-populating corner normals
with vertex normals, since it isn't related at all and is only used
in one code path.
Image engine uses 4 gpu textures that are as large as the area being
drawn. The amount of needed GPU memory can be reduced by dividing the
region in smaller parts. Reducing the GPU memory also reduces the stalls
when updating the textures, improving the performance as well.
This optimization works, but is disabled for now due to some rounding
errors that drawn lines on the screen where the screen is divided.
It used to be a number of fixed full screen images where the
responsibility was at image engine. Now moved the responsibility to the
drawing mode to make sure we can allocate non-full region-size textures
in a future refactoring.
`get_gpu_textures` was created when the image engine didn't support
texture streaming and used the gpu textures that were stored in the
image buffer itself.
This patch implements the Simple Star Glare node. This is only an approximation
of the existing implementation in the CPU compositor, an approximation that
removes the row-column dependency in the original algorithm, yielding an order
of magnitude faster computations. The difference due to the approximation is
readily visible in artificial test cases, but is less visible in actual use
cases, so it was agreed that this approximation is worthwhile.
For the future, we can look into approximating this further using a closed form
IIR recursive filter with parallel interconnection and block-based parallelism.
Which is expected to yield another order of magnitude faster computations.
The different passes can potentially be combined into a single shader with some
preprocessor tricks, but doing that complicated that code in a way that makes
it difficult to experiment with future optimizations, so I decided to leave it
as is for now.
Differential Revision: https://developer.blender.org/D16724
Reviewed By: Clement Foucault
This patch implements the Ghost Glare node. It is implemented using
direct convolution as opposed to a recursive one, which produces
slightly different results---more accurate ones, however, since the
ghosts are attenuated where it matters, the difference is barely
visible and is acceptable as far as I can tell.
A possible performance improvement is to implement all passes in a
single shader dispatch, where an array of all scales and color
modulators is computed recursively on the host then used in the shader
to add all ghosts, avoiding usage of global memory and unnecessary
copies. This optimization will be implemented separately.
Differential Revision: https://developer.blender.org/D16641
Reviewed By: Clement Foucault
These functions were originally implemented because:
- Not all of them existed pre C++17, but now we are using C++17.
- The call stack depth is quite a bit deeper with the std functions, making
debugging slower and more annoying. I didn't find this to be a problem
anymore recently.
No functional changes are expected.
Nodes which are common in multiple editors (RGB, Value, Switch, RGB to BW)
has less width in compositor editor. Patch changes compositor node width to
140 for consistency.
Reviewed by: HooglyBoogly
Differential Revision: https://developer.blender.org/D16719
OpenVDB likes to crash even in release builds when volumes become too small.
To fix this I used the same function that we use in other places already to
determine if the resulting volume will be too small.
Float images loaded in Blender are converted to scene linear and don't
require additional conversion. Image engine can reuse the rect_float of
those images. An assert statement is added tp make this more clear and
to test on missing code paths or future developments.
This splits the logic to detect if the MeshSequenceCache modifier
evaluation is for the ORCO mesh into its own function. This will allow
reusing the logic for when GeometrySet support is added to the modifier
(D11592).
No functionnal changes.
Differential Revision: https://developer.blender.org/D16611
Texture usage flags can now be provided during texture creation specifying
the ways in which a texture can be used. This allows the GPU backends to
perform contextual optimizations which were not previously possible. This
includes enablement of hardware lossless compression which can result in
a 15%+ performance uplift for bandwidth-limited scenes on hardware such
as Apple-Silicon using Metal.
GPU_TEXTURE_USAGE_GENERAL can be used by default if usage is not known
ahead of time. Patch will also be relevant for the Vulkan backend.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D15967
Fix a number of small memory leaks in the Metal backend. Unreleased blit
shader objects and temporary textures addressed. Static memory manager
modified to defer creation until use. Added reference count tracker to
shared memory manager across contexts, such that cached memory allocations
will be released if all contexts are destroyed and re-initialized.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D16415
Implementing non-geometry-shader path for rendering stencil shadows,
used by the workbench engine.
Patch also contains a few small modifications to Create-info to ensure
usage of gl_FragDepth is explicitly specified.
This is required for testing of the patch.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D16436
Implemented geometry shader alternative for rendering of UV edges in Metal, as geometry shaders are unsupported.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D16452
There is a more recent implementation as a geometry node, but this code
is used by RNA and Cycles still. In order to help understand the code
to tell if it can be replaced this makes some small changes:
- Use indexing instead of pointer incrementing
- Add const to unchanged arguments
- Avoid unnecessary indentation
- Use references for expected non-null arguments
On linux a man page is generated before the
scripts are installed, this lead to USD getting
a null pointer for it's pluging path and crashing
the process.
Porting conservative depth rendering to use non-geometry shader path for
Metal.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D16424
Additional mat3 constructors added, global variable namespace collisions
for uniform and object color avoided via re-name.
Metal vertex format compatibility added for shaders wherein vertex data
goes through a double-conversion and cannot be implicitly converted during
Metal vertex assembly e.g. bitmasks passed directly as unsigned type in
shader interface for certain shader interfaces.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D16433
Required by Metal backend for efficient shader compilation. EEVEE material
resource binding permutations now controlled via CreateInfo and selected
based on material options. Other existing CreateInfo's also modified to
ensure explicitness for depth-writing mode. Other missing bindings also
addressed to ensure full compliance with the Metal backend.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D16243
I organized the fields so that similar variables were closer together and
more "important" fields were closer to the beginning. I also added
comments to help describe the purpose of most fields.
Differential Revision: https://developer.blender.org/D16710
Based on feedback from Simon Thommes, for link-drag-serach it's most
useful to have the A and B sockets connected, first, then the factor
sockets, then the special color mix operations. This addresses that by
adding the search items in order and decrementing a weight manually
as items are added.
The PDF of mesh lights were not being scaled by `pdf_selection` when
the light tree was disable. This resulted in the mesh lights having
the wrong PDF and thus the wrong brightness.
Differential Revision: https://developer.blender.org/D16717
Make the `Object *` and `Mesh *` parameter of `USD_mesh_topology_changed()`
`const`. This function only inspects them, and doesn't need to modify
them.
No functional changes.
Since moving to float scaling, the method of accessing the text
width with the aspect applied wasn't working properly.
Based on contributions by @lone_noel & @harley, see D15043.
The optimization is done by removing the `len` member from the groups
and using fewer `for` loops.
But it's not a really impactful optimization.
Only 1.9% in the weld operation of a high poly mesh.
(disregarding getting the vertex map and all other operations on a
Blender frame).
The readability improvement comes from using more familiar types like
`int` and `int2` instead of `WeldGroup` and `WeldGroupEdge` structs.
In the merge_by_distance code, `vert_dest_map` is modified to become a
vertex group map. But this is not clear from the code.
Also use the `_map` suffix on `vert_final` and `edge_final`.
And remove some unnecessary variables.
The wrap function was a feature of the old compositor
but was never ported to the new CPP compositor node.
This simply removes the unused property, the function could alternatively be
restored but in has been missing for a decade so it does not seem missed.
Differential Revision: https://developer.blender.org/D16712
Fixes T102796
This diff improves the docs for bmesh by adding the default values to all methods. This is motivated by this issue https://github.com/nutti/fake-bpy-module/issues/118 in fake-bpy-module which generates a typed API for authoring Blender scripts and addons from the docs.
After this diff gets merged, the Blender docs get updated, and `fake-bpy-module` gets regenerated, the type signatures in `fake-bpy-module` will match the reality of Blender's API.
Here's a diff for the docs using the modified script:
https://gist.github.com/xixixao/1c83153adbcefbe0859f9cc9ba757d46
I "hardcoded" the defaults based on the types of the arguments, after some testing and consulting the Blender .c source for these APIs.
Here's a test script that verifies that the arguments with defaults added in this diff are indeed not required by Blender 3.3: https://gist.github.com/xixixao/adc4e5a076e80a63735bd60c7c9e7a0d
I made the minimum changes required to get this doc generation script fixed, but let me know if I should restructure this script more.
I also amended the comments of three args, 2 to align them with Python (NULL -> None) and one to mark it as optional (CurveProfile).
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D16400
The executable would get boost python linking in when not needed, and even when
linking to Python libraries there were still unresolved symbols. Instead split
off boost python libraries and link them only where needed.
Compiling Cycles in Visual Studio 2022 yields the error:
C4146: unary minus operator applied to unsigned type, result still unsigned
Replacing it with explicit two's complement achieves the same result as signed
negation but avoids the error.
Differential Revision: https://developer.blender.org/D16616
For file formats like PNG, JPEG and TIFF. Eventually this should use
the OpenColorIO view transform, but this at least makes the image
closer to what it should be in most cases.
Differential Revision: https://developer.blender.org/D16482
The Blur Attribute node mixes values of neighboring elements in meshes and curves.
Currently it supports points, edges and faces on meshes and points on curves.
In theory, support for face corners could be added, but useful semantics are not
obvious yet.
The node calculates a weighted average of each element with its neighbors (based
on curve/mesh topology). The weight of the element itself is always 1, and the weight
of the neighbor elements is controlled by the weight input socket. In the future,
more options for how different elements are weight can be added (e.g. smoothing
groups and selection).
The node can perform multiple blurring iterations to achieve a blurrier result.
Generally, it is better to do multiple iterations in one node instead of using
multiple blur nodes because it has better performance in the current implementation.
We use the term "Blur" (instead of "Smooth") because smoothing is generally more
related to removing roughness from surfaces. When viewing the result of the
Blur Attribute node in the viewport, it looks like an image is blurred. While the
node can also be used to smooth surfaces, other/better algorithms exists for that
purpose (which e.g. don't reduce the volume of the mesh to zero with too many
iterations).
Differential Revision: https://developer.blender.org/D13952
**Problem**:
Area lights in Cycles have spread angle, in which case some part of the area light might be invisible to a shading point. The current implementation samples the whole area light, resulting some samples invisible and thus simply discarded. A technique is applied on rectangular light to sample a subset of the area light that is potentially visible (rB3f24cfb9582e1c826406301d37808df7ca6aa64c), however, ellipse (including disk) area lights remained untreated. The purpose of this patch is to apply a techniques to ellipse area light.
**Related Task**:
T87053
**Results**:
These are renderings before and after the patch:
|16spp|Disk light|Ellipse light|Square light (for reference, no changes)
|Before|{F13996789}|{F13996788}|{F13996822}
|After|{F13996759}|{F13996787}|{F13996852}
**Explanation**:
The visible region on an area light is found by drawing a cone from the shading point to the plane where the area light lies, with the aperture of the cone being the light spread.
{F13990078,height=200}
Ideally, we would like to draw samples only from the intersection of the area light and the projection of the cone onto the plane (forming a circle). However, the shape of the intersection is often irregular and thus hard to sample from directly.
{F13990104,height=200}
Instead, the current implementation draws samples from the bounding rectangle of the intersection. In this case, we still end up with some invalid samples outside of the circle, but already much less than sampling the original area light, and the bounding rectangle is easy to sample from.
{F13990125}
The above technique is only applied to rectangle area lights, ellipse area light still suffers from poor sampling. We could apply a similar technique to ellipse area lights, that is, find the
smallest regular shape (rectangle, circle, or ellipse) that covers the intersection (or maybe not the smallest but easy to compute).
For disk area light, we consider the relative position of both circles. Denoting `dist` as the distance between the centre of two circles, and `r1`, `r2` their radii. If `dist > r1 + r2`, the area light is completely invisible, we directly return `false`. If `dist < abs(r1 - r2)`, the smaller circle lies inside the larger one, and we sample whichever circle is smaller. Otherwise, the two circles intersect, we compute the bounding rectangle of the intersection, in which case `axis_u`, `len_u`, `axis_v`, `len_v` needs to be computed anew. Depending on the distance between the two circles, `len_v` is either the diameter of the smaller circle or the length of the common chord.
|{F13990211,height=195}|{F13990225,height=195}|{F13990274,height=195}|{F13990210,height=195}
|`dist > r1 + r2`|`dist < abs(r1 - r2)`|`dist^2 < abs(r1^2 - r2^2)`|`dist^2 > abs(r1^2 - r2^2)`
For ellipse area light, it's hard to find the smallest bounding shape of the intersection, therefore, we compute the bounding rectangle of the ellipse itself, then treat it as a rectangle light.
|{F13990386,height=195}|{F13990385,height=195}|{F13990387,height=195}
We also check the areas of the bounding rectangle of the intersection, the ellipse (disk) light, and the spread circle, then draw samples from the smallest shape of the three. For ellipse light, this also detects where one shape lies inside the other. I am not sure if we should add this measure to rectangle area light and sample from the spread circle when it has smaller area, as we seem to have a better sampling technique for rectangular (uniformly sample the solid angle). Maybe we could add [area-preserving parameterization for spherical
ellipse](https://arxiv.org/pdf/1805.09048.pdf) in the future.
**Limitation**:
At some point we switch from sampling the ellipse to sampling the rectangle, depending on the area of the both, and there seems to be a visible line (with |slope| =1) on the final rendering
which demonstrate at which point we switch between the two methods. We could see that the new sampling method clearly has lower variance near the boundaries, but close to that visible line,
the rectangle sampling method seems to have larger variance. I could not spot any bug in the implementation, and I am not sure if this happens because different sampling patterns for ellipse and rectangle are used.
|Before (256spp)|After (256spp)
|{F13996995}|{F13996998}
Differential Revision: https://developer.blender.org/D16694
Part of the workaround for NVIDIA driver issue got lost in the changes to
switch to the GPU module.
Differential Revision: https://developer.blender.org/D16709
If there is a layer that hasn't frames but is not the active layer
the pointer to frames can be NULL and crash.
Now, the empty layers are skipped.
Reported to me by Samuel Bernou.
Image engine is used to draw the image inside the image editor, uv editor and node editor. The
performance during scrolling wasn't smooth when using larger textures on a dedicated GPU. Main
reason was the data transfers that happens when panning the image.
The original idea of the image engine was to have 4 textures that are as large as the editor.
Those textures would be used to simulate a larger canvas where if the texture is out of the
visible area the texture would be reused to contain the data of a new visible area. This would
reduce the data transfers to only on certain x/y coordinates. Between those coordinates no
data transfers would be needed.
This patch implements the mechanism described above. During development other areas to
improve have been detected (incorrect color management for float textures, using different
image formats to reduce data transfer bandwidths, using different render techniques for
images upto 8k). More improvements will follow.
This updates the libraries dependencies for VFX platform 2023, and adds various
new libraries. It also enables Python bindings and switches from static to
shared for various libraries.
The precompiled libraries for all platforms will be updated to these new
versions in the coming weeks.
New:
Fribidi 1.0.12
Harfbuzz 5.1.0
MaterialX 1.38.6 (shared lib with python bindings)
Minizipng 3.0.7
Pybind11 2.10.1
Shaderc 2022.3
Vulkan 1.2.198
Updated:
Boost 1.8.0 (shared lib)
Cython 0.29.30
Numpy 1.23.2
OpenColorIO 2.2.0 (shared lib with python bindings)
OpenImageIO 2.4.6.0 (shared lib with python bindings)
OpenSubdiv 3.5.0
OpenVDB 10.0.0 (shared lib with python bindings)
OSL 1.12.7.1 (enable nvptx backend)
TBB (shared lib)
USD 22.11 (shared lib with python bindings, enable hydra)
yaml-cpp 0.8.0
Includes contributions by Ray Molenkamp, Brecht Van Lommel, Georgiy Markelov
and Campbell Barton.
Ref T99618
Instead of the the same folder as the Blender executable, generate a manifest
that lets us move the libraries out of the way of users and into a separate
folder.
Ref T99618
This is not compatible with upcoming shared libraries usage, where we can't
let each library have their own libstdc++ and safely exchange memory.
Hopefully it is no longer required either. This is from before Blender builds
were even made on CentOS 7, and there is no obvious reason it is still needed.
Ref T99618
Shared libraries and USD plugins will be placed in the same folder, where USD
already looks for plugins.
This means that specifying the path to the plugins will no longer be needed
once the new libraries are available for all platforms. For now the code was
refactored to support both cases.
Ref T99618
Ensure the environment is set up for blender_test, idiff and oslc so that they
can find the required shared libraries.
Also deduplicate add_bundled_libraries() between Linux and macOS.
Includes contributions by Ray Molenkamp and Brecht Van Lommel.
Ref T99618
This patch adds a new `max_working_set_exceeded()` check on Metal so that we can display a "System is out of GPU memory" message to the user. Without this, we get obtuse "CommandBuffer failed" errors at render time due to exceeding the size limit of resident resources.
Likely fix for T101787 & T102786.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D16713
Issue was the lifetime of GPUVertFormat & GPUVertAttr.
Both need to be static in the function to be persistent here (and
handled appropriately).
Was an error in rB319ee296fd0c.
Maniphest Tasks: T102966
Differential Revision: https://developer.blender.org/D16704
Support Esc / RMB to cancel dolly, move, rotate & zoom.
Previously only roll could be canceled.
This can be useful to temporary orbit away from the camera or an
orthographic view without having to manually set it back.
- Add VIEW_CANCEL event_code.
- De-duplicate operator freeing logic for the roll operator.
- Structure checks so adding cancel is is simplified.
- Split event checks into two blocks, one for model events, another
for all other events.
Migrate (some) of the UDIM offset calculation from inside one
of the packing engines (where it's consumed) to the packing
operator (where it's produced).
This change (and others) will help simplify the future migration
of the packing engine inside editors/uvedit/uvedit_islands.cc
to the Geometry module, so it can eventually replace the other
packing engine in geometry/intern/uv_parametrizer.cc
Store the potentially owned mesh separately from the original/evaluated
mesh which is now stored with a const pointer. Also store mesh spans
separately in the class so they don't have to be retrieved for every
index.
Avoid using an incremented "loop index" variable which makes the whole
data-filling necessarily sequential. No functional changes expected,
this just simplifies some refactors to face corner storage.
Translation from python enum values were incorrect and textures created
in python using those types would result in faulty textures. In
renderdoc those textures would not bind.
Remove most of the old (pre-3.0) pose library:
- Remove The entire `editors/armature/pose_lib.c` file
- Deprecate `Object::poselib` in DNA
- Remove Operators marked as deprecated in T93405
- Remove RNA property `Object.pose_library`
- Add comment to clarify that the call `BLO_read_id_address(reader,
ob->id.lib, &ob->poselib);` handles deprecated data.
Note that this functionality has been documented as deprecated since
Blender 3.2.
What remains of the old pose library: The DNA for action markers
(`bAction::markers`) and the corresponding Python API. This will allow
future versions of Blender to still convert old pose libraries to new
ones (via the Pose Library panel in the Action editor).
Manifest task: T93406
Bugs that caused wrong renders should be fixed now, and tests that showed minor
floating point differences on platforms were tweaked to sidestep the problem.
Ref T77889
Ensure that thumbnails of images with aspect greater than 256:1 have
dimensions of at least one pixel.
See D16707 for more details
Differential Revision: https://developer.blender.org/D16707
Reviewed by Brecht Van Lommel
We need to ensure the mask layer exists before running the operator.
I made the order of function calls here the same as in newer code later
on in this file for consistency.
Differential Revision: https://developer.blender.org/D16696
Ensure that thumbnails of images with aspect greater than 256:1 have
dimensions of at least one pixel.
See D16707 for more details
Differential Revision: https://developer.blender.org/D16707
Reviewed by Brecht Van Lommel
We need to ensure the mask layer exists before running the operator.
I made the order of function calls here the same as in newer code later
on in this file for consistency.
Differential Revision: https://developer.blender.org/D16696
Simplify checks so that one check doesn't influence the following one.
Checks no longer pass the last-visited frame number into the "start frame"
parameter of the next check. This way all test values are hard-coded and
easy to read, without having to understand how all the checks fit together.
No functional changes.
Replace `EXPECT_NE(column, nullptr)` with `ASSERT_NE(column, nullptr)` to
abort the test on failure. With `EXPECT_NE`, the test would continue onto
the next like, which accesses `column->cfra` and would segfault.
No functional changes to the tests. Just better reporting of failures.
rB8b7cd1ed2a17 broke this for the paint slots
rB4669178fc378 broke this for regular attributes
Name filtering in UI Lists works when:
- [one] the items to be filtered have a name property
-- see how `uilist_filter_items_default` gets the `namebuf`
- [two] custom python filter functions (`filter_items`) implement it
themselves
-- if you use `filter_items` and dont do name filtering there, the default
name filtering wont be used
So, two problems with rB8b7cd1ed2a17:
- [1] items to be listed changed from `texture_paint_images` to
`texture_paint_slots`
-- the former has name_property defined, the later lacks this
- [2] the new `ColorAttributesListBase` defined a `filter_items` function,
but did not implement name filtering
And the problem with rB4669178fc378:
- it added `filter_items` functions, but did not implement name filtering.
These are all corrected now.
Fixes T102878
Maniphest Tasks: T102878
Differential Revision: https://developer.blender.org/D16676
This unassign the Alt+D shortcut from the detach operator. Right now the
operator has to be accessed via the menu.
Alt+D is left for duplicate link, following the other editors.
Cursor motion events on windows read the position from GetCursorPos()
which wasn't always the same location stored in `lParam`.
In situations where events were handled immediately this wasn't often a
problem, for heavier scenes or when updates between event handling was
slow - many in-between cursor events would be incorrect.
This behavior dates back to the initial commit, there doesn't seem to be
a good reason not to use the cursor coordinates from the event.
Noticed when investigating T102346.
Make OpenGL errors match formatting used by GCC & clang
(as well as Blender's logging), so utilities that recognize this
convention can be used to quickly access this location.
Detect when the operator adds its own undo step and clear the panel.
An alternative fix for [0] which caused T101743.
Needed to prevent changing values in the last operator panel from
destructively undoing brush steps.
[0]: 11bdc321a2.
Reviewed By: mont29, joeedh
Ref D16523
This reverts commit 11bdc321a2.
This change caused T101743, in general OPTYPE_UNDO should not be used
to control the UI.
This also caused 2x undo pushes to be performed when sculpting,
although sculpt mode doesn't add a step for the second undo push
so it wasn't visible to the user.
An alternative fix will be applied separately as it's too risky this
close to a release.
The following functions only supported back slashes on WIN32,
which can use both forward and back slashes.
- BLI_path_append
- BLI_path_append_dir
- BLI_path_slash_ensure
- BLI_path_slash_rstrip
Follow up to [0] which is a more limited bug-fix.
[0]: a16ef95ff6
Support both forward and back slashes on WIN32.
Forward slashes for paths in WIN32 was removed in [0] (for BLI_path_join)
& [1] (for BLI_path_name_at_index), this is correct on UNIX as back
slashes can be used in paths but not on WIN32 which can use both.
Note that other path functions such as BLI_path_append &
BLI_path_slash_ensure should be updated too, but this is out of scope
for a bug-fix.
Documenting and ensuring Windows path handling functions all handle
forward slashes can be done separately.
[0]: 8f7ab1bf46
[1]: 511ae22264
Reviewed By: harley
Ref D16700
When triangulating meshes, the UV unwrapper was previously using a
heuristic to split quads into triangles. If one of the internal angles
is greater than 180degrees, a so-called "reflex angle", the heuristic
was giving a poor choice of split.
Instead of using a special case for quads, this change routes everything
through the generic n-gon `BLI_polyfill_beautify` method instead.
Reviewed By: Brecht Van Lommel
Differential Revision: https://developer.blender.org/D16505
When n-gons share vertices, their triangulation can be non-manifold,
even if the original mesh is manifold.
The UV Unwrapper does not currently work with non-manifold meshes.
This workaround attempts to modify the triangulation of n-gons in
the UV unwrapper to preserve the manifold property.
This change replaces the previous fix for quads, and extends it
to all n-gons.
See T84078 as motivation for this change.
Differential Revision: https://developer.blender.org/D16521
Make "Convert Attribute" and "Convert Color Attribute" operators
auto-fill their initial settings with active attribute's domain
and data type if it wasn't already set explicitly.
Differential Revision: https://developer.blender.org/D16550
You shouldn't be able to retrieve a mutable node from a const node tree
or a mutable socket from a const node. Use const_cast in one place in
order to correct this without duplicating the function, which is still
awkward in the C-API.
Uses a light tree to more effectively sample scenes with many lights. This can
significantly reduce noise, at the cost of a somewhat longer render time per
sample.
Light tree sampling is enabled by default. It can be disabled in the Sampling >
Lights panel. Scenes using light clamping or ray visibility tricks may render
different as these are biased techniques that depend on the sampling strategy.
The implementation is currently disabled on AMD HIP. This is planned to be fixed
before the release.
Implementation by Jeffrey Liu, Weizhen Huang, Alaska and Brecht Van Lommel.
Ref T77889
This was not working well in non-trivial scenes before the light tree, and now
it is even harder to make it work well with the light tree. It would average the
with equal weight for every light object regardless of intensity or distance, and
be quite noisy due to not working with multiple importance sampling.
We may restore this if were enough good use cases for the previous implementation,
but let's wait and see what the feedback is.
Some uses cases for this have been replaced by the shadow catcher passes, which
did not exist when this was added.
Ref T77889
Traverse all scene dependency graphs and stop audio playback for each
scene.
Also fixes T71233
Reviewed By: sergey, mont29
Differential Revision: https://developer.blender.org/D16646
The attribute smoothing node asks for the ability to have a factor
outside the range of 0 and 1. The problem with this is that there is a
negative weight assertion for some of the mixers. If mixing between 0
and 1, then at a factor of 2, one of the elements will be negative.
Differential Revision: https://developer.blender.org/D16351
In a few places, nodes were added without updating the Identifiers and
vector. In other places nodes we removed without removing from and
rebuilding the vector. This is solved in a few ways. First I exposed
a function to rebuild the vector from scratch, and added unique ID
finding to a few places.
The changes to node group building and separating are more involved,
mostly because it was hard to see the correct behavior without some
refactoring. Now `VectorSet` is used to store nodes involved in the
operation. Some things are handled more simply with the topology
cache and by passing a span of nodes.
The new atomic disjoint set uses additional atomics which are not supported
as intrinsics on all architectures and require linking to libatomic.
Now always link to libatomic on Linux when it is available, instead of only
checking if atomic add for int64_t requires linking to this library.
Thanks to Sergey for the help fixing this.
`is_internal` is supposed to mean that the attribute shouldn't be
visible in lists or the spreadsheet by default, and that it can't be
accessed in geometry nodes. But the value was reversed, which
just happened to work because the list filtering was swapped.
Differential Revision: https://developer.blender.org/D16680
It is not really used from any of the sources, including the
standalone app. Since we are moving to a more backend-independent
drawing it makes sense to remove header which was specific to
how Blender integrates Cycles into viewport.
There is probably some cleanup in CMake files is possible, but
there is some inter-dependency with USD.
Differential Revision: https://developer.blender.org/D16681
This change fixes issues with viewport rendering when Metal
GPU backend is used for drawing. This is not a default build
configuration and requires the following tweaks:
- Enable WITH_METAL_BACKEND CMake option (set it to on)
- Use `--gpu-backend metal` command line arguments
It also helps using the `--factory-startup` command line
argument to ensure Eevee is not used (it is not ported and
will crash).
The root of the problem was in the use of glViewport().
It is replaced with the GPU_viewport_size_get_i() which
is supposed to be portable equivalent form the GPU module.
Without this change the viewport size is detected to be 0
which backfired in few places.
The rest of the changes were to make the code more robust
in the extreme conditions instead of asserting or crashing.
Simplified and streamlined GPU resources creation in the
display driver. It was a bit convoluted mix of creation of
the GPU resources and resizing them to the proper size. It
even seemed to be done in the reverse order. Now it is as
simple as "just ensure GPU resources are there for the
given texture or buffer size".
Also avoid division by zero in the tile manager.
Differential Revision: https://developer.blender.org/D16679
Steps to reproduce were:
- Open a .blend file that is located inside of an asset library and
contains assets.
- Save and close the file.
- Open a new file (Ctrl+N -> General).
- Open asset browser and load the asset library from above.
- If the assets from the file above still show up, press refresh button.
- -> Assets from the file above don't appear.
Likely fixes the underlying issue for T102610. A followup will be needed
to correct the empty asset index files written because of this bug.
We're in the process of moving responsibilities from the file/asset
browser backend to the asset system. 1efc94bb2f introduces a new
representation for asset, which would own the asset metadata now instead
of the file data.
Since the file-list code still does the loading of asset libraries,
ownership of the asset metadata has to be transferred to the asset
system. However, the asset indexing still requires it to be available,
so it can update the index with latest data. So transfer the ownership,
but still keep a non-owning pointer set.
Differential Revision: https://developer.blender.org/D16665
Reviewed by: Bastien Montagne
This is a workaround required to get BAT reliably working again after
recent rB133dde41bb5b, which fixed many indirectly linked IDs being
tagged as directly linked, and therefore having their reference written
in .blend file.
It seems that BAT is still missing proper handling of some ID pointers.
Required for the end of the Heist production here at Blender Studio.
rB9fa4ceb340951 caused a forward compatibility issue.
Going forward, when changing socket names, only the name should be
changed and not the identifier if possible.
The existing `DisjointSet` data structure only supports single
threaded access, which limits performance severely in some cases.
This patch implements `AtomicDisjointSet` based on
"Wait-free Parallel Algorithms for the Union-Find Problem"
by Richard J. Anderson and Heather Woll.
The Mesh Island node also got updated to make use of the new data
structure. In my tests it got 2-5 times faster. More details are in 16653.
Differential Revision: https://developer.blender.org/D16653
When entering paint modes the paint pivot was cleared,
which broken rotate around pivot. Fixed for all paint modes.
PBVH modes set the pivot to the PBVH bounding box
while texture paint uses the evaluated mesh bounding box.
90ea1b7643 broke the sorting that happens as nodes are selected.
The compare function for stable sort had different requirements than
the previous implementation.
This patch adds an integer identifier to nodes that doesn't change when
the node name changes. This identifier can be used by different systems
to reference a node. This may be important to store caches and simulation
states per node, because otherwise those would always be invalidated
when a node name changes.
Additionally, this kind of identifier could make some things more efficient,
because with it an integer is enough to identify a node and one does not
have to store the node name.
I observed a 10% improvement in evaluation time in a file with an extreme
number of simple math nodes, due to reduced logging overhead-- from
0.226s to 0.205s.
Differential Revision: https://developer.blender.org/D15775
Fix debug assert opening File Browser on Windows platform.
See D16672 for more details.
Differential Revision: https://developer.blender.org/D16672
Reviewed by Julian Eisel
To make GPU backends other than OpenGL work. Adds required pixel buffer and
fence objects to GPU module.
Authored by Apple: Michael Parkin-White
Ref T96261
Ref T92212
Reviewed By: fclem, brecht
Differential Revision: https://developer.blender.org/D16042
Use recently introduced BKE_fcurve_merge_duplicate_keys (that was moved
from the transform system to BKE) to merge keyframes on the same frame
after snapping (same as what would happen with the transform system).
This makes behavior consistent and prevents a state after snapping that
cannot be reproduced in any other way.
NOTE: same probably has to be done for greasepencil, but that is for
another commit.
This exposes the fcurve cleanup from transform system to other callers
in anticipation to use it in the snapping operators.
It has been renamed from `posttrans_fcurve_clean` to
`BKE_fcurve_merge_duplicate_keys` to better describe what it does.
No functional change expected.
Ref. T101996
NOTE: same probably has to be done for greasepencil, but that is for
another commit.
Maniphest Tasks: T101996
Differential Revision: https://developer.blender.org/D16663
This just replaces the combined usage of OB_MODE_PAINT_GPENCIL
OB_MODE_SCULPT_GPENCIL
OB_MODE_WEIGHT_GPENCIL
OB_MODE_VERTEX_GPENCIL.
Differential Revision: https://developer.blender.org/D16652
Introduced in fc7beac8d6, but I think this never worked because the
`asset_library_ref` of the temporary file-list used for reading in a
background thread is nulled. Now there's a different pointer that we can
use that works properly.
Two things here:
- fix ghash lookup from rB4d497721ecd1
-- this was looking in the wrong map (causing an assert on file load)
- set MovieTrackingObject active_plane_track to NULL upon deletion (same
as for regular tracks)
-- rBfe38715600c introduced a crash because `draw_tracking_tracks` would
still get an active plane track (logic for getting these changed)
Maniphest Tasks: T102887
Differential Revision: https://developer.blender.org/D16660
a5e7657cee missed this call where clamped slicing is necessary.
The subdivision of a segment purposefully modifies the handle types of
the other side of the following control point, but that didn't work for
the final cyclic segment.
The code I wrote to group triangles or multires quads that
belonging to single faces into single PBVH nodes had edge
cases that failed. The code is now much simpler and simply
assigns groups of primitives to nodes.
When entering paint modes the paint pivot was cleared,
which broken rotate around pivot. Fixed for all paint modes.
PBVH modes set the pivot to the PBVH bounding box
while texture paint uses the evaluated mesh bounding box.
If no brush exists the stroke operator
falls through to the grab transform
op in the global view3d keymap.
This now works. It would be nice if
we could get rid of that keymap entry
though and add it manually to the edit/paint
modes that need it.
The code I wrote to group triangles or multires quads that
belonging to single faces into single PBVH nodes had edge
cases that failed. The code is now much simpler and simply
assigns groups of primitives to nodes.
When entering paint modes the paint pivot was cleared,
which broken rotate around pivot. Fixed for all paint modes.
PBVH modes set the pivot to the PBVH bounding box
while texture paint uses the evaluated mesh bounding box.
If no brush exists the stroke operator
falls through to the grab transform
op in the global view3d keymap.
This now works. It would be nice if
we could get rid of that keymap entry
though and add it manually to the edit/paint
modes that need it.
In this case the blocksize may not the one we requested, which was assumed to be
the case. Instead get the effective block size from the compiler as was already
done for Metal and OneAPI.
Unless using WITH_CYCLES_DEBUG.
This is convenient for investigating kernel performance, but too verbose to
always have in the buildbot logs especially now that we are also compiling HIP
and OneAPI kernels.
Materials now have an enum to set the emission sampling method, to be
either None, Auto, Front, Back or Front & Back. This replace the
previous "Multiple Importance Sample" option.
Auto is the new default, and uses a heuristic to estimate the emitted
light intensity to determine of the mesh should be considered as a light
for sampling. Shaders sometimes have a bit of emission but treating them
as a light source is not worth the memory/performance overhead.
The Front/Back settings are not important yet, but will help when a
light tree is added. In that case setting emission to Front only on
closed meshes can help ignore emission from inside the mesh interior that
does not contribute anything.
Includes contributions by Brecht Van Lommel and Alaska.
Ref T77889
* Split light types into own files, move light type specific code from
light tree and MNEE.
* Move flat light distribution code into own kernel file and host side
building function, in preparation of light tree addition. Add light/sample.h
as main entry point to kernel light sampling.
* Better separate calculation of pdf for selecting a light, and pdf for
sampling a point on the light. The selection pdf is now also stored in
LightSampling for MNEE to correctly recalculate the full pdf when the
shading position changes but the point on the light remains fixed.
* Improvement to kernel light storage, using packed_float3, better variable
names, etc.
Includes contributions by Brecht Van Lommel and Weizhen Huang.
Ref T77889
This cache was never written to, only "copied" between sockets in one
case, it dates back at least a decade. It doesn't make sense to store
caches on node trees directly anyway, since they can be used in
multiple places.
No user visible changes expected.
Add a function to query the full path for a file, so that asset files
can get the path via the asset representation and its new asset
identifier. This is designed to be a reliable way to locate an asset,
and using it is yet another step to rely less on the problematic file
browser code.
Also, previous code would build the full path manually in a few places,
which is good to deduplicate anyway.
With the asset identifier introduced in the previous commit, we can now
locate an asset just from its `AssetRepresentation`, without requiring
information from the asset library and the file browser storage. With
this we can remove some hacks and function parameters. A RNA/BPY
function is also affected, but I didn't remove the paramter to keep
compatibility. It's simply ignored and not required anymore, noted this
in the parameter description (noted for T102877).
No user visible changes expected.
`AssetIdentifier` holds information to uniquely identify and locate an
asset. More information:
https://wiki.blender.org/wiki/Source/Architecture/Asset_System/Back_End#Asset_Identifier
For the start this is tied quite a bit to file paths, so that external
assets are assumed to be in the file system.
This is needed to support an "All" asset library (see T102879), which
would contain assets from different locations. Currently the location of
an asset is queried via the file browser backend, which however requires
a common root location. It also moves us further away from the file
browser towards the asset system (see T87235) and allows us to remove
some hacks (see following commit).
No user visible changes expected.
If an asset library is located on disk, store the path to it in the
asset library data. This is called the "root path" now.
With this we can construct an asset identifier, which is introduced in
the following commit.
When reading directories recursively, the code would first only set the
file name as the relative path and then later iterate over the read files
and prepend the recursed into path, to get the complete path relative to
the recursed into directory. This isn't clear and confused me quite a
bit. And it is not compatible with what we need for creating asset
identifiers, which are introduced in the 2nd following commit.
Instead properly determine the complete relative path when initially
adding the file, and don't change it after. The asset identifier can the
be constructed properly at the time needed.
`done` was only used in one place, and `is_updating` was never read.
Generally we should avoid adding this sort of temporary data to longer
lived structs.
When applying the "Bake Action" operator in pose mode
it could throw an error saying "Nothing to Bake"
even though bones are selected
That is because the code was looking for a selected armature
But in Pose Mode, clicking into empty space to de-select would also
deselect the armature.
Then box selecting would not make the armature selected again
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D16593
When applying the "Bake Action" operator in pose mode
it could throw an error saying "Nothing to Bake"
even though bones are selected
That is because the code was looking for a selected armature
But in Pose Mode, clicking into empty space to de-select would also
deselect the armature.
Then box selecting would not make the armature selected again
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D16593
rB133dde41bb5b changed handling of (in)directly linked status handling
for IDs, now IDs that are not directly linked get proper status and
handling on file save. this broke parts of the `pyapi_idprop_datablock`
tests.
This commit essentially ensures before writing .blend file that only
actualy locally used linked IDs are tagged as `LIB_TAG_EXTERN` (and
therefore get a reference stored in the .blend file).
Previously, a linked ID tagged as directly linked would never get back
to the indirectly linked status. Consequence was a lot of 'needless'
references to linked data in .blend files.
This commit also introduces a new flag for lib_query ID usage types,
`IDWALK_CB_DIRECT_WEAK_LINK`, used currently for base's Object
pointer, and for LayerCollection's Collection pointer.
NOTE: A side-effect of this patch is that even IDs explicitely linked by
the user won't be kept anymore when writing files, i.e. they will not be
there anymore after a file reload, if they are not actually used.
Overhead of new process is below 0.1% in whole file saving process in
a Heist production file e.g.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D16605
Retrieve and load the vertices selected/hidden state in pos_nor extraction.
Reviewed By: fclem
Maniphest Tasks: T102519
Differential Revision: https://developer.blender.org/D16594
This is usability improvement, rather than bugfix. By default, height of
VSE timeline is clamped to 7 channels, unless more are added. But adding
new strip is not intuitive, since user can't scroll up due to clamping.
Clamp timeline height to n+1 used channels, so there is always 1 free
channel visible.
`BPYGPU_IS_INIT_OR_ERROR_OBJ` is not implemented in all pygpu functions.
Instead of copying and pasting that call across the API when it has no
gpu context, override the methods with one that always reports error.
Using 32 does not make much sense, because there will be 4 remaining
padding bytes in the struct anyway. Using 64 instead does not actually
increase the size of the struct, but makes allocations less likely.
With stereoscopy enabled, sseq->multiview_eye is set to left and
right eye during drawing, but this value is not reset, even if
stereoscopy is disabled.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D16639
`OldNewMap` used to have its own map implementation. Given that
the file uses C++ now, it is easy to use a C++ map implementation
instead. This simplifies the code a lot.
Going forward it might make sense to remove the `OldNewMap`
abstraction or to split it up in two (currently, `NewAddress.nr` has
two different meanings in different contexts which is confusing).
No functional changes are expected.
Differential Revision: https://developer.blender.org/D16546
Before, the frame was not created, but now if there is
a previous stroke and teh frame changed, the new keyframe
is created.
This is related to T102623
In `Orphan Data` (or `Blender File`) view, the ID pointer of the
actions's parent tree-element wasn't actually pointing to an ID, but to
the list-base containing the IDs.
Early out (with a warning) if the object or object-data to unlink the
action from is not clear.
Caused by rBb4a2096415d9.
Similar to rBe772087ed664.
Maniphest Tasks: T102797
Differential Revision: https://developer.blender.org/D16635
Before rBa8a454287a27, edge creases were copied to the result mesh as
part of `MEdge`. Now they are stored in a separate `CD_CREASE` layer,
which I mistakenly disabled for interpolation. However, to maintain
the geometry node uses a field input, remove the interpolated attribute
there.
Caused by a8a454287a which assumed it was possible
to access the raw data of the edge creases layer. Also allow
processing vertex creases even if there aren't any edge creases.
**Empty Slot Fix**
Currently the boolean modifier transfers the default material from
meshes with no materials and empty material slots to the faces on the
base mesh. I added this in a2d59b2dac for the sake of consistency,
but the behavior is actually not useful at all. The default empty
material isn't chosen by users, it just signifies "nothing," so when
it replaces a material chosen by users, it feels like a bug.
This commit corrects that behavior by only transferring materials from
non-empty material slots. The implementation is now consistent between
exact mode of the boolean modifier and the geometry node.
**Index-Based Option**
"Index-based" is the new default material method for the boolean
modifier, to access the old behavior from before the breaking commit.
a2d59b2dac actually broke some Boolean workflows fundamentally, since
it was important to set up matching slot indices on each operand. That
isn't the cleanest workflow, and it breaks when materials change
procedurally, but historically that hasn't been a problem. The
"transfer" behavior transfers all materials except for empty slots,
but the fundamental problem is that there isn't a good way to specify
the result materials besides using the slot indices.
Even then, the transfer option is a bit more intuitive and useful for
some simpler situations, and it allows accessing the behavior that has
been in 3.2 and 3.3 for a long time, so it's also left in as an option.
The geometry node doesn't get this new option, in the hope that we'll
find a better solution in the future.
Differential Revision: https://developer.blender.org/D16187
**Empty Slot Fix**
Currently the boolean modifier transfers the default material from
meshes with no materials and empty material slots to the faces on the
base mesh. I added this in a2d59b2dac for the sake of consistency,
but the behavior is actually not useful at all. The default empty
material isn't chosen by users, it just signifies "nothing," so when
it replaces a material chosen by users, it feels like a bug.
This commit corrects that behavior by only transferring materials from
non-empty material slots. The implementation is now consistent between
exact mode of the boolean modifier and the geometry node.
**Index-Based Option**
"Index-based" is the new default material method for the boolean
modifier, to access the old behavior from before the breaking commit.
a2d59b2dac actually broke some Boolean workflows fundamentally, since
it was important to set up matching slot indices on each operand. That
isn't the cleanest workflow, and it breaks when materials change
procedurally, but historically that hasn't been a problem. The
"transfer" behavior transfers all materials except for empty slots,
but the fundamental problem is that there isn't a good way to specify
the result materials besides using the slot indices.
Even then, the transfer option is a bit more intuitive and useful for
some simpler situations, and it allows accessing the behavior that has
been in 3.2 and 3.3 for a long time, so it's also left in as an option.
The geometry node doesn't get this new option, in the hope that we'll
find a better solution in the future.
Differential Revision: https://developer.blender.org/D16187
Actually, the interpolation can be done only between keyframes different of breakdown type,
but in some cases, this is not convenient.
Now, a new option is displayed to allow the interpolation using breakdown keyframes
as interpolation extremes.
Reviewed By: mendio, pepeland
Differential Revision: https://developer.blender.org/D16515
Makes code safer, easier to understand, and less verbose. I detected
negligible performance differences, only a slight improvement for the
normalize step where the function call overhead was probably more
of a bottleneck.
I kept `memset` instead of `.fill(float3(0))` because that gave
better performance in my tests. In the future that stage could be
parallelized, or we could make sure new arrays are allocated with
`calloc`.
Meta strip position relies on strips within. When meta strip is empty,
update function, that would normally update it's position returns early
and this causes translaton to behave erratically.
When strip is empty, treat it as normal strip and move its start frame
as with other strip types.
This patch makes the Bake Actions operator fills the Start Frame & End From with that of the Preview Range if "Use Preview Range" is enabled.
{F13973619}
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D16630
Use `ED_view3d_win_to_3d` to unproject the first click coords.
This is the same function used in other tools like Draw Curve.
Differential revision: https://developer.blender.org/D16617
The node transferred position once as a generic attribute, and then set
the values again manually. This wastes processing during the attribute
transfer step. On a 1 million face grid, I observed roughly an 8%
improvement, from 231.5 to 217.1 ms average and 225.4 to 209.6 ms min.
It's helpful to have these topology maps standardized and organized
a bit better so they can be optimized and considered for future caching
together. Also use a more standard name for the map for that purpose.
Fix a performance regression from 05952aa94d by storing pointers
to mesh arrays locally in the subdiv foreach context. In a simple test
of a 1 million face grid, this improved performance by 5% (from 0.31
to 0.295 seconds).
A utility function retrieved mesh arrays for every element after
05952aa94d which can be easily avoided. This was used when
building the GPU indices for sculpt mode drawing. In my tests this
saves 0.1ms per PBVH node. There may be very slight improvements
in line art and shrinkwrap as well.
The issue was that geometry nodes was not reevaluated after changing the
content of the collection. That resulted in the other object still having a
reference to the deleted object, which resulted in a crash when it tried to
access it.
Adding the `ID_RECALC_GEOMETRY` tag indicates that the content of the
collection has changed and will trigger geometry nodes setups that depend
on the collection to update.
{F13294314}
# Process
In the pixel extraction process a larger domain will be extracted then the input mesh.
The borders of uv islands are extended with connected geometry of the input mesh.
The extended mesh is then fed into the pixel extraction process.
A mask is used to limit the extraction so UV islands will not overlap.
Input UV islands.
{F13206401}
Extended UV Island (only one showing).
{F13288764}
This patch doesn't include fixing uv seams at non-manifold edges (like suzannes eyes) as that
would require a different approach (edge extending or pixel copy-ing). The later has already been
implemented in D14702, but should be revisited to only use do the non-manifold edge fixing.
This patch supports fixing UV seams across UDIM textures.
There might be an issue when using a single texture on multiple uv maps.
Reviewed By: brecht, joeedh, JulienKaspar
Maniphest Tasks: T97352
Differential Revision: https://developer.blender.org/D14970
Add support for `pin_unselected` in new UV Packing API.
Regression introduced by API change in rBe3075f3cf7ce.
Duplicate change to rB0ce18561bc82 in master.
This new inheritance behavior is more beneficial for the metal Backend.
Also change the default depth write behavior of shaders to be unchanged.
This makes fragment shader depth amendment more explicit.
This also add the missing depth_write for metal kernels.
When accessing certain structure fields from Python, they return
mathutils types instead of generic arrays (this is based on subtype).
This exposes this information in the Python API documentation.
Differential Revision: https://developer.blender.org/D16626
Issue was caused by imprecise math due to using float numbers.
Use double instead.
No negative performance impact was observed.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D16517
Meta strip range was adjusted in versioning because of previous issues
by function `version_fix_seq_meta_range`. After `speed_factor` property
was added, this changed how function works and result was incorrect
function due to uninitialized property value.
Running `version_fix_seq_meta_range` after `seq_speed_factor_set` fixes
this issue.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D16606
Overlay relationship lines were missing between the object having the
modifier and the target object.
To make this consistent with other objects types, now draw relationship
lines for greasepencil and hooks now, too.
Spotted while looking into T102741.
Maniphest Tasks: T102741
Differential Revision: https://developer.blender.org/D16609
Brush cursors were missing when opening a file saved in sculpt/vertex-/
weightpaint mode.
Since we dont do a full modeswitch on file load in `ED_editors_init` for
grease pencil since rBde994d6b7b1c, we were missing the brush cursor
toggling [`ED_gpencil_toggle_brush_cursor`] normally done in
`ED_gpencil_setup_modes`.
This is now explicitly added for any greasepencil paintmode (in case
object is active).
Maniphest Tasks: T102685
Differential Revision: https://developer.blender.org/D16603
These comments were from rBcc7460eaa491 / rBde994d6b7b1c /
rB7037ff920447 but ended up in a confusing state.
Moved into the right places and reworded appropriately.
Spotted while looking into T102685.
Maniphest Tasks: T102685
Differential Revision: https://developer.blender.org/D16601
Caused by {rBbf8507414889}
Above comit set the wrong cursors (WM_CURSOR_DEFAULT).
When releasing MMB, we need to return to WM_CURSOR_PAINT_BRUSH.
When exiting, we need to return to WM_CURSOR_DOT (since this is the
default cursor for the tool, see `_defs_gpencil_paint` >
`generate_from_brushes`)
Maniphest Tasks: T102650
Differential Revision: https://developer.blender.org/D16591
When in greasepencil sculpt-/vertexpaint mode and using selection
masking, picking points wasnt working correctly.
So regular gpencil.select (without modifier keys) was not enabled for the
keymap. This only really makes sense for RCS (right click select) atm
(and not using RC fallback tools - which I dont think are present in
these modes anyways). With RCS, this can be supported and afaict, this
does not cause conflicts.
NOTE: prior to D16576, one could use the ALT modifier key (this
combination was actually in the keymap) -- but it should select the
entire stroke, which is handled in D16576.
Differential Revision: https://developer.blender.org/D16577
Caused by rB85f90ed6fd88.
Above commit made sure whole strokes are selected when the
GP_SELECTMODE_STROKE is used in different modes, but ignored the fact
that this can also already be set by the entire_strokes select operator
property.
This is now corrected.
Differential Revision: https://developer.blender.org/D16576
As described in T101948, this commit changes socket name to be more
consistent with other nodes that generate instances output.
Differential Revision: https://developer.blender.org/D16394
Change name to make navigation easier for beginner users. This should
more clearly hint at the use of this node to change the full geometry,
and not work with fields, and makes the name more consistent.
Differential Revision: https://developer.blender.org/D16396
While implementing T102289, I noticed that this node has
several solutions that are different from other, newer nodes.
- Explicitly set default values
- Use references
- Reduce the size of the node settings structure
Differential Revision: https://developer.blender.org/D16548
Instead of creating a new mesh from scratch, modify an existing mesh.
This allows us to keep derived caches for triangulation and bounds
alive more easily, and allows keeping materials and non-generic
attributes like vertex groups alive on the mesh.
It also has other performance benefits, since face and face corner
attributes aren't affected at all, and because of reduced overhead
from not allocating a new mesh.
Updating edge attributes is a bit more complicated now, since we
have to completely replace the arrays but keep the existing attribute
IDs around. The new mesh update tag is also slightly too specific IMO.
But I think both of those things will improve in the future because
of existing plans for further refactoring these areas:
- New attribute storage that gives pointer stability
- Further use and granularity of mesh update tagging that will
make the correct API more clear
Fixes T102711
Differential Revision: https://developer.blender.org/D16615
Add a script for a very simple object evaluation benchmark.
There could be more advanced ways of measuring the time
per-node or per modifier, but this just loads the file, tags
the active object for a reevaluation, and times how long
that takes.
Differential Revision: https://developer.blender.org/D16604
The main goal here is to move towards more self contained node
definitions. Previously, one would have to change `blenkernel` to
add a new node which is not necessary anymore. There is no need
for all these register functions to "leak out" of the nodes module.
Differential Revision: https://developer.blender.org/D16612
Point clouds are meant to use a default radius of 0.01 when there is no
radius attribute. The curve to points node can create curves without a
radius attribute. This affects joining and the realize instances node.
Similar to 30f244d96f.
Based on discussion in D10891, this node isn't meant to be exposed and
may be removed in the future. The fact that it was exposed in search
menus was a mistake from the implementation of link-drag-search
and bdb5754147.
I explicitly removed the link drag search implementation, and added
(Legacy) to the node name which hides it from the add node search.
The issue is caused by the combination of the following factors:
- There is a driver from custom property to the subdivision surface
modifier.
- Active material index tags the ID for the copy-on-write update.
Dependency graph currently does not fully distinguish between
copy-on-write tag and properties-update tag, so the copy-on-write tag
makes the dependency graph believe that it is property which actually
affects evaluation has been changed.
The simple solution is to treat the active material slot index as an
interface data which does not need to trigger copy-on-write tag.
The possible downside of this solution is that if someone has a driver
from this property the driver will stop working. Whether there is such
a real-life setup or not is not clear. Is not something advisable to do
anyway.
Possible alternative would be to introduce more granularity into the
way how property tagging is done. This is something that would be nice
to implement eventually, but it is a much bigger refactor.
Differential Revision: https://developer.blender.org/D16613
Basically copy the information from the commit message of the
03e2f11d48 directly to the code.
This makes the information easier to find when working on the
code.
The copy-on-write is really an implementation detail of the
dependency graph. While there are still cases where there is
no better tag to be used, the ID_RECALC_COPY_ON_WRITE should
not be used in combination with a dedicated tag.
For example if location of object changes the proper tag is
`ID_RECALC_TRANSFORM`. Tagging with `ID_RECALC_TRANSFORM |
ID_RECALC_COPY_ON_WRITE` will seemingly work, but this is
not an intended usage.
Ensure VolumeUniformPool uses is always incremented when retrieving a buffer in alloc().
Otherwise the same buffer will be retrieved for more than one object when incrementing the pool size.
Reviewed By: fclem
Maniphest Tasks: T101402
Differential Revision: https://developer.blender.org/D16607
If the compositor is enabled or disabled, the node warnings for
unsupported nodes is not updated because of a missing redraw. This patch
adds that missing redraw in order to make the change immediate.
Missed in the first commit[1].
Initially it was reported that the `flags` parameter was unused on
`imb_cache_filename` but it turns out another swath of code was unused
related to that same function. Clean this up now too.
[1] 38573d515e
The wrong guiding distribution was used when direct and indirect light
scattering happened at different locations. Now use a different distribution
for each location.
Recording is not quite correct since OpenPGL does not support spliting the
path like this, instead recording at the start of the volume ray. In practice
this seems to make little difference.
Differential Revision: https://developer.blender.org/D16448
Swapping some ID lists between Mains must invalidate the name_map cache.
Note that in theory, at least WM type could be ignored by name_map
cache, since it is a singleton. However, don't think it's worth adding
extra complication here, for really marginal benefits. The overhead of
rebuilding the name cache here is extremly small.
For some reason, this issue did not show so far in master, only appeared
in some branch work on improving (in)direct status of linked IDs... Go
figure.
With this change Blender, delivered via the Microsoft store, will launch without the console window flashing.
Ref T88613
Differential Revision: https://developer.blender.org/D16589
Previously when using the "Jump To Keyframe" operator
in conjunction with subframes, the decimal part would be kept.
Meaning that it wouldn't jump exactly to the frame.
This fix also makes it so it is possible to jump to keyframes
that are on subframes.
Reviewed by: Sybren
Differential Revision: https://developer.blender.org/D16595
Add int attributes interpolation support for GPU subdivision.
Ensure cached shaders match their intended defines.
(The defines parameter was ignored when requesting a second time the same shader with different defines)
De-duplicate the extract_attr_init code for subdiv/non-subdiv.
Reviewed By: jbakker, fclem
Maniphest Tasks: T102076
Differential Revision: https://developer.blender.org/D16420
This removes the unused code for the IBM tile cache APIs. These have
been unused for as far back as I could manage to search.
Since TIFF was used for the cached images, this removal will allow for
an easier review when it comes time to move TIFF to OIIO as part of
T101413.
Differential Revision: https://developer.blender.org/D16587
When either initializing with a non-constant value, or using the standard
[[ string widget = "null" ]] metadata. This can be used for inputs like
normals and texture coordinates, where you don't want to default to a
constant value.
In previous OSL versions the input value was automatically ignore when it
was left unchanged for such inputs. However that's no longer the case in
the latest version, breaking existing nodes. There is no good entirely
backwards compatible fix, but I believe the new behavior is better and will
keep most existing cases working.
Fix T102450: OSL node with normal input not working
a5e7657cee didn't account for slices of zero sizes, and the asserts
were slightly incorrect otherwise. Also, the change didn't apply to
`Span`, only `MutableSpan`, which was a mistake. This also adds "safe"
methods to `IndexMask`, and switches function calls where necessary.
These editors have their own "Auto-Snap" activation option.
So ignore the option in the 3D View in these cases.
The generic incremental snap function doesn't seem really useful in these cases.
If an incremental snap needs to be implemented, this should be a new option of `eAnimEdit_AutoSnap`.
After a recent refactor in b247588dc0, object mode would not show wireframe
edges that do not exist in the original mesh. Now only hide such edges while in
edit mode, where they would otherwise look as if they can be selected.
Before the refactor, edit and paint modes would sometimes show wireframes and
sometimes not, depending on the modifier stack in unpredictable ways.
This wasn't used for backwards compatibility, because Blender does not
read from the `nodetype` anywhere. It also wasn't used for forward
compatibility, because it was not initialized for new node groups.
With this change Blender, delivered via the Microsoft store, will launch without the console window flashing.
Ref T88613
Differential Revision: https://developer.blender.org/D16589
Vulkan doesn't have a memory allocator builtin. The application should
provide the memory allocator at runtime. Vulkan Memory Allocator is a
widely used implementation.
Vulkan Memory Allocator is a header only implementation, but the using
application should compile a part in a CPP compile unit. The file
`vk_mem_alloc_impl.cc` and `extern_vulkan_memory_allocator` library
is therefore introduced.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D16572
This is not used for anything in practice currently. The original intention
was probably to generate different socket subtypes, but that is solved
differently now (e.g. using `NodeSocketFloatDistance`). It's possible
that an addon tried to use this but it's rather unlikely.
Differential Revision: https://developer.blender.org/D13188
This patch warns the user that the compositor setup is not fully
supported when an unsupported node is used. The warning is displayed as
an engine warning overlay and in the node header itself.
See T102353.
Differential Revision: https://developer.blender.org/D16508
Reviewed By: Clement Foucault
(Probably requires ASan for a reliable crash.)
Steps to reproduce were:
* Enter Geometry Nodes Workspace
* Press "New" button in the geometry nodes editor header
* Right-click the data-block selector -> "Mark as Asset"
* Change 3D View to Asset Browser
* Create a catalog
* Drag new Geometry Nodes asset into the catalog
* Save the file
* Press Shift+A in the geometry nodes editor
There was a general issue here with keeping catalog pointers around
during the add menu building. The way it does things, catalogs may be
reloaded in between.
Since the Current File asset library isn't loaded in a separate thread,
the use-after-free would always happen in between. For other libraries
it could still happen, but apparently didn't by chance.
This patch disables the realtime compositor on MacOS until Metal is
supported. This is because MacOS doesn't support the necessary GPU
features to make it work.
An engine error overlay is displayed if it is enabled and the option
itself is greyed out.
See T102353.
Differential Revision: https://developer.blender.org/D16510
Reviewed By: Clement Foucault
This patch turns the checkbox option to enable the viewport compositor
into a 3-option enum that allows:
- Disabled.
- Enabled.
- Enabled only in camera view.
See T102353.
Differential Revision: https://developer.blender.org/D16509
Reviewed By: Clement Foucault
The active catalog ID (UUID) was a read only property. From a studio I
got the request to make this editable, so their pipeline tooling can
make certain assets visible.
Differential Revision: https://developer.blender.org/D16356
Reviewed by: Sybren Stüvel
This patch implements the Track Position node for the realtime
compositor.
Differential Revision: https://developer.blender.org/D16387
Reviewed By: Clement Foucault
Opening the material selector after reloading files could cause long UI
freezes, because some linked in materials don't have the preview stored
in the source file. So Blender would keep rerendering it after every
file load, which may involve compiling OpenGL shaders, which again
freezes the UI typically. This was reported as quite an issue for the
Heist Production by the Blender Studio.
Don't render these missing material previews from linked data-blocks
anymore.
Differential Revision: https://developer.blender.org/D16538
Reviewed by: Brecht Van Lommel, Jeroen Bakker
The old hard limit was 5, but now it's possible set to a max
value of 16. UI limit remains to 5.
This extreme value is only used in some corner case, but it
was a request by some artists.
Warning: Using very high values could produce a long calculation time, especially in strokes with a high density of points.
It is possible that the image editor redraw happens prior to the
"Loading render kernels" status is reported from status but after
the display driver is created. This will make the image editor to
wait on the scene mutex to update the display pass in the film.
If it happens to be that the kernels are actually to be compiled
then the Blender interface appears to be completely frozen, without
any information line in the image editor.
This change makes it so the amount of time the scene mutex is held
during the kernel compilation is minimal.
It is a bit unideal to unlock and re-lock the scene mutex in the
middle of update, while nested reset mutex is held, but this is
already what is needed for the OptiX denoiser optimization some
lines below. We can probably reduce the lifetime of some locks,
avoiding such potential out-of-order re-locking. Doing so is
outside of the scope of this patch.
The scene update only happens from the single place in the session,
which makes it easy to ensure the kernels are loaded prior the rest
of the scene update.
Not only this change makes it so that the "Loading render kernels"
status appears in the image editor, but also allows to pan and zoom
in the image editor, potentially allowing artists to re-adjust their
point of interest.
Differential Revision: https://developer.blender.org/D16581
This prevents Blender from crashing with an access violation when
stopping a VR session using the DirectX backend. The issue occurred for
any headset on Windows+Nvidia when using the SteamVR runtime and thus
affected a large number of users.
The workaround presented here is to simply skip unregistering the
shared resources on exit, as either of the calls to
`wglDXUnregisterObjectNV()` or `wglDXCloseDeviceNV()` will result in an
access violation. While not ideal, this avoids the crash and doesn't
present any issues when starting a new VR session.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D16569
Before this, if there were no missing files, the operator would run
successfully but there would be no user feedback at all, making the
user wonder if the operator was even run.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D16585
`GeometrySet::has()` can return an empty component. It's more convenient
if it doesn't, since other code rarely wants to access an empty component.
The alternative would be adding an `is_empty()` check in the lazy function
for the viewer node, that would work fine too, for this case.
Differential Revision: https://developer.blender.org/D16584
When combining the internal geometry component instancing (used when
the original object type doesn't match the evaluated data type) with
the "vertex dupli" instancing could cause the fix from e508de0417
to fail, because the subsequent fix from 864af51d6a popped from the
"instance generator type" stack even when there was nothing added to it
(for geometry instancing).
Currently the face set of every single face is saved for every sculpt undo step.
When only changing the face sets of a small section of the mesh, this can be quite
wasteful. It also makes face sets a special case compare to all other sculpt undo step
types, which makes the whole system more complex and harder to improve.
Fixes T101203.
Reviewed By: Hans Goudey
Differential Revision: https://developer.blender.org/D16224
Ref D16224
Currently the face set of every single face is saved for every sculpt undo step.
When only changing the face sets of a small section of the mesh, this can be quite
wasteful. It also makes face sets a special case compare to all other sculpt undo step
types, which makes the whole system more complex and harder to improve.
Fixes T101203.
Reviewed By: Hans Goudey
Differential Revision: https://developer.blender.org/D16224
Ref D16224
We currently check multiple dynamic attribute providers for the
attribute ID, even after it has been removed (which can free the name).
This was used as a simple way to remove multiple attributes with the
same name (dealing with name collisions). However, that doesn't happen
in practice at this point, since so much code has moved to the
attribute API which checks for it.
Since we free BMesh attributes by attempting on every domain,
sometimes the attribute wouldn't be found for a CustomData.
We avoid reallocating custom data blocks in that case, so we
need to pass the ownership of the "pool" back to the BMesh.
Wrote a new API method, BKE_pbvh_sync_visibility_from_verts
that flushes vertex hidden flags to edges & faces.
Fixes not being able to sculpt outside a face set after
undoing the fkey hide-all-but-this operator.
Wrote a new API method, BKE_pbvh_sync_visibility_from_verts
that flushes vertex hidden flags to edges & faces.
Fixes not being able to sculpt outside a face set after
undoing the fkey hide-all-but-this operator.
Currently slicing a span clamped the final size so that it would be
within bounds of the input. However, in the vast majority of cases
that is already the case anyway, and we can use asserts to detect
when that assumption fails.
The clamping had a performance cost. On a test interpolating a boolean
attribute from 1 million curves to 4 million points, removing the
clamping saved about 10% of the time. That's an extreme case but
this probably slightly improves performance in other cases too.
Slicing is used a lot in the new curve code.
This commit introduces `slice_safe` which still does the clamping,
and uses it in the few places that needed it or where I wasn't
sure.
MoltenVK is part of the vulkan SDK. Blender requires the vulkan SDK
to compile. This patch adds the MoltenVK includes and libraries to
the Vulkan includes and libraries.
This avoids need to do special trickery detecting whether the principal
point is to be changed when reloading movie clip. This also allows to
transfer the optical center from high-res footage to possibly its lower
resolution proxy without manual adjustment.
On a user level the difference is that the principal point is exposed in
the normalized coordinates: frame center has coordinate of (0, 0), left
bottom corner of a frame has coordinate of (-1, -1) and the right top
corner has coordinate of (1, 1).
Another user-visible change is that there is no more operator for setting
the principal point to center: use backspace on the center sliders will
reset values to 0 which corresponds to the center.
The code implements versioning in both directions, so it should be
possible to open file in older Blender versions without loosing
configuration.
For the Python API there are two ways to access the property:
- `tracking.camera.principal_point` which is measured in the normalized
space.
- `tracking.camera.principal_point_pixels` to access the pixel-space
principal point.
Both properties are not animatable, so there will by no conflict coming.
Differential Revision: https://developer.blender.org/D16573
Before this an attempt to assign track from another object wos
silently assigning active object to null. Such silencing of
errors is not really a good way.
De-duplicate selection logic and threshold between various
operators (selection and sliding).
The user measurable difference is that regular selection
threshold now matches sliding threshold: it is more strict
now. The possible downside of this is that it might be more
tricky to select tracks, but this is what needs to happen
for tools support. Also, this matches object selection in
viewport.
Use active object accessor, and then access data from the
object. There is no need to have an API call for shortcut
of all object fields.
Should be no functional change.
Make it more obvious in the name that an operation is not
cheap, and that the function operates on a tracks from
object and does not need a global tracking structure.
Historically tracks and reconstruction for motion tracking camera
object were stored in the motion tracking structure. This is because
the data structures pre-dates object tracking support, and it was
never changed to preserve compatibility.
Now the compatibility code supports more tricks and allows to change
the ownership without breaking any compatibility. This is what this
change does: it moves tracks from motion tracking structure to the
motion tracking camera object, and does it in a way that no
compatibility is broken.
One of the side-effects of this change is that the active track is
now stored on motion tracking object level, which allows to change
active motion tracking object without loosing active track. Other
than that there are no expected user-level changes.
The function is already doing a lot of memory indirections and
sub-optimal lookups, so for the simplicity and robustness of the
system might as well just do copy-on-write update.
This adds a vulkan backend to GHOST. The code was extracted from the
tmp-vulkan branch. The main difference with the original code is that
GHOST isn't responsible for fallback. For Metal backend there is already
an idea that the GPU module is responsible for the fallback, not the system.
For Blender we target Vulkan 1.2 at the time of this patch.
MoltenVK (needed to convert Vulkan calls to Metal) has been added as
a separate package.
This patch isn't useful for end-users, currently when starting blender with
`--gpu-backend vulkan` it would crash as the `VBBackend` doesn't initialize
the expected global structs in the GPU module.
Validated to be working on Windows and Apple. Linux still needs to be tested.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D13155
The refactor in f1c0249f34 incorrectly placed the material index
remapping before the transfer of generic attributes. Now that the
material index is a generic attribute, it was overwritten.
This resolves some issues with correlation artifacts at higher sample counts.
Fix T101356, correlation issues in new PMJ pattern.
Differential Revision: https://developer.blender.org/D16561
The node level was an indication of how deep the node was in the tree.
It was only used for detecting link cycles. Now that the node topology
cache from 25e307d725 exists, this calculation can be removed
completely.
The level calculation was quadratic and very slow on larger node trees.
In the mouse house file with a few thousand nodes, it took 23ms on
every single update. Another benefit is storing slightly less runtime
data, though this was only 2 bytes per node.
Differential Revision: https://developer.blender.org/D16566
Instead of generating a dependency sorted node list whenever evaluating
texture or EEVEE/viewport shader nodes, use the existing sorted array
from the topology cache. This may be more efficient because the
algorithm isn't quadratic. It's also the second-to-last place to
use `node.runtime->level`, which can be removed soon.
Differential Revision: https://developer.blender.org/D16565
Commit c8dd33f5a37b6a6db0b6950d24f9a7cff5ceb799 in OSL changed behavior of
parameters that reference each other and are also overwritten with an
instance value. This is causing the "NormalIn" parameter of a few OSL nodes
in Cycles to be set to zero somehow, which should instead have received the
value from a "node_geometry" node Cycles generates and connects automatically.
I am not entirely sure why that is happening, but these parameters are
superfluous anyway, since OSL already provides the necessary data in the
global variable "N". So this patch simply removes those parameters (which
mimics SVM, where these parameters do not exist either), which also fixes
the rendering artifacts that occured with recent OSL.
While this fixes built-in shader nodes, custom OSL scripts can still have
this problem.
Ref T101222
Differential Revision: https://developer.blender.org/D16470
Remove `private:` from the PBVHFaceIter. This is not really a C++
class, and the C++ code generates a lot of warnings about unused
fields.
Also mark function static and run clang-format.
Fixes point cloud selection by using new draw call.
Reviewed By: fclem
Maniphest Tasks: T102659
Differential Revision: https://developer.blender.org/D16501
Fixes point cloud selection by using new draw call.
Reviewed By: fclem
Maniphest Tasks: T102659
Differential Revision: https://developer.blender.org/D16501
When attempting to load contents of a .blend, the code would just assume
if the number of added items is 0, that means it's not a .blend (but a
directory, although the previous commit fixed that part already).
However there may be situations where a .blend file simply doesn't
contain anything of interest to be added (e.g. when listing assets
only), so have a proper "none" value for this.
When loading asset libraries, there would be a bunch of "non-existent
directory" prints because we were calling a function to list directory
contents on .blend file paths. Make sure the path actually points to a
directory.
Some nodes, like Combine Color or the math nodes, label sockets
differently depending on the mode to be more descriptive.
`uiTemplateNodeView` now also uses this dynamic label rather than the
socket's name for labeling in the UI so the shown labels always match
the ones on the node itself.
Reviewed By: Hans Goudey
Differential Revision: http://developer.blender.org/D16563
You can install several versions of blender side by side and all
of them will try to create a "Blender" shortcut, which if already
exists the msi installer throws a warning about.
This change adds the blender version number to the desktop and start
menu shortcuts, side steps the problem and it's easier to tell the
various blender versions apart.
Rewrite the edge split code to operate directly on Mesh instead
of BMesh. This allows for the use of multi-threading and makes
the node around 2 times faster. Around 15% of the time is spent
just on the creation of the topology maps, so these being cached
on the mesh could cause an even greater speedup. The new node
gave identical results compared to the BMesh version on all the
meshes I tested it on (up to permutation of the indices).
Here are some of the results on a few simple test cases:
(Intel i7-7700HQ (8 cores) @ 2.800GHz , with 50% of edges selected)
| | 370x370 UV Sphere | 400x400 Grid | Suzanne 4 subdiv levels |
| ----- | ----------------- | -------------- | --------------------- |
| Mesh | 89ms | 111ms | 76ms |
| BMesh | 200ms | 276ms | 208ms |
Differential Revision: https://developer.blender.org/D16399
The "Activate Same Type Next/Prev" and "Find Node" operators pan
the view to the newly selected node if it's outside of the view. This
simplifies that check and improves it in the case where the node
is only partially visible-- now it pans in while it didn't before.
The previous code was quadratic; it looped over every link for every
node. For one large node tree I tested the operator took 20ms. On the
same node tree it now takes less than 1ms.
The change replaces the current building of the "dependency list"
on every call with a use of the topology cache from 25e307d725.
PaintMaskFloodMode is supposed to be an alias
of eSelectOp. paint_intern.h now includes
ED_select_utils.h and simply assigns the
relevent members of eSelectOp to PaintMaskFloodMode's
members.
This patch adds basic face iterators to the sculpt API. The interface is similar to the existing vertex iterators. It's not C++ (though it does mark private fields in PBVHFaceIter as private if compiling under C++).
Example:
```
PBVHFaceIter fd;
BKE_pbvh_face_iter_begin(pbvh, node, fd) {
/* Face reference and face index */
PBVHFaceRef face = fd->face;
int face_index = fd->index;
/* Can read and modify hide flag if it exist (it may not) */
if (fd->hide) {
*fd->hide ^= true; /* toggle hide */
}
/* Can read and modify face set if it exists */
if (fd->face_set) {
*fd->face_set = something;
}
/*Can read vertices*/
for (int i=0; i<fd.verts_num; i++) {
float *co = SCULPT_vertex_co_get(ss, fd.verts[i]);
}
}
BKE_pbvh_face_iter_end(fd);
```
Reviewed By: Brecht Von Lommen and Hans Goudey
Differential Revision: https://developer.blender.org/D16225
Ref D16225
If compositing uses renderlayers, and a camera was missing in the
associated scenes, the error message also referred to the scene the comp
tree was in (not the scene of the renderlayer -- which can potentionally
be different).
This was confusing and is now rectified.
Maniphest Tasks: T102514
Differential Revision: https://developer.blender.org/D16542
Always position the nodes added with the node search at the point where
the search operator was invoked by ensuring the operator context is the
main node editor region.
This was an unintended change of rBbdb57541475f, caused by the operator
now getting the cursor position in region space. So when the operator
was called from the menu, it would get the cursor position in the
region space of the menu, which lead to an offset when adding the node
since it expected the coordinates to be in the space of the node editor.
Setting the correct operator context also fixes inconsistent transform
sensitivity depending on zoom when adding nodes via the search in the
menu which has been an issue since as far back as Blender 2.79.
Also includes a small fix for the vertical offset of nodes added by the
search which varied depending on the UI scale. Same fix as in
rB998ffcbf096e.
Reviewed By: Hans Goudey
Differential Revision: http://developer.blender.org/D16555
Regression in [0] which exposed a problem with GHOST_kGrabHide on Win32
and to some extent X11.
Prior to [0], walk mode used it's own warping logic (hiding the cursor
& recording the motion between events). Using GHOST's grabbing makes
sense in this case as it's not very convenient for operators to
implement their own cursor warping, however doing so exposed a problem
where the mouse cursor could leave the window.
This would happen because the cursor needed to be within 2px of the
screen edge before warping.
Resolve by warping within a small region in the middle of the window.
Note that warping to the window center on each motion would be ideal
but is more involved as the logic for Win32 & X11 doesn't work properly
when every motion warps, so this needs further investigation to support.
This problem doesn't apply to GHOST/Cocoa which warps every motion event
on the spot and GHOST/Wayland doesn't set the mouse position at all to
implement this functionality.
[0]: 4c4e8cc926
This feature has been disabled since 2.80 but the feature description was still visible in the UI.
Addresses part of T101429
Breaking changes:
- Removes `EDGESLIDE_EDGE_NEXT`
- Removes `EDGESLIDE_PREV_NEXT`
Reviewed By: mano-wii
Maniphest Tasks: T101429
Differential Revision: https://developer.blender.org/D16430
Use the shared cache system introduced in e8f4010611 for the
"looptris" triangulation cache. This avoids recalculation when meshes
are copied but the positions or topology don't change. The most obvious
improvement is for cases like a large meshes being adjusted slightly
with a simple geometry nodes modifier. In a basic test with a transform
node with a 1 million point grid I observed an improvement of 13%, from
9.75 to 11 FPS, which shows that we avoid spending 6ms recalculating
the triangulation of every update.
This also makes the thread safety for the triangulation data use a
more standard double-checked lock pattern, which is nice because we
can avoid holding a lock whenever the cached data is retrieved.
Split from https://developer.blender.org/D16530
As part of T95966, this patch moves loose edge information out of the
flag on each edge and into a new lazily calculated cache in mesh
runtime data. The number of loose edges is also cached, so further
processing can be skipped completely when there are no loose edges.
Previously the `ME_LOOSEEDGE` flag was updated on a "best effort"
basis. In order to be sure that it was correct, you had to be sure
to call `BKE_mesh_calc_edges_loose` first. Now the loose edge tag
is always correct. It also doesn't have to be calculated eagerly
in various places like the screw modifier where the complexity
wasn't worth the theoretical performance benefit.
The patch also adds a function to eagerly set the number of loose
edges to zero to avoid building the cache. This is used by various
primitive nodes, with the goal of improving drawing performance.
This results in a few ms shaved off extracting draw data for some
large meshes in my tests.
In the Python API, `MeshEdge.is_loose` is no longer editable.
No built-in addons set the value anyway. The upside is that
addons can be sure the data is correct based on the mesh.
**Tests**
There is one test failure in the Python OBJ exporter: `export_obj_cube`
that happens because of existing incorrect versioning. Opening the
file in master, all the edges were set to "loose", which is fixed
by this patch.
Differential Revision: https://developer.blender.org/D16504
This separates the UV reverse sampling and the barycentric mixing of
the mesh attribute into separate multi-functions. This separates
concerns and allows for future de-duplication of the UV sampling
function if that is implemented as an optimization pass. That would
be helpful since it's the much more expensive operation.
This was simplified by returning the triangle index in the reverse
UV sampler rather than a pointer to the triangle, which required
passing a span of triangles separately in a few places.
(Probably requires ASan for a reliable crash.)
Steps to reproduce were:
* Enter Geometry Nodes Workspace
* Press "New" button in the geometry nodes editor header
* Right-click the data-block selector -> "Mark as Asset"
* Change 3D View to Asset Browser
* Create a catalog
* Drag new Geometry Nodes asset into the catalog
* Save the file
* Press Shift+A in the geometry nodes editor
There was a general issue here with keeping catalog pointers around
during the add menu building. The way it does things, catalogs may be
reloaded in between.
Since the Current File asset library isn't loaded in a separate thread,
the use-after-free would always happen in between. For other libraries
it could still happen, but apparently didn't by chance.
For some pixels with transparent surfaces, no depth value would be written
when sampling chooses a reflection/refraction BSDF instead of transparent
BSDF. Now ensure we always write at some some depth value to the pass.
This is still not ideal as the resulting depth values are noisy same as they
are for depth of field and motion blur, but at least there should be no gaps.
* This patch just moves runtime data to the runtime struct to cleanup
the dna struct. Arguably, some of this data should not even be there
because it's very use case specific. This can be cleaned up separately.
* `miniwidth` was removed completely, because it was not used anywhere.
The corresponding rna property `width_hidden` is kept to avoid
script breakage, but does not do anything (e.g. node wrangler sets it).
* Since rna is in C, some helper functions where added to access the
C++ runtime data from rna.
* This size of `bNode` decreases from 432 to 368 bytes.
A `using FooPtr = std::unique_ptr<Foo>` isn't that useful usually, just
saves a few character stokes. It obfuscates the underlying type, which
is usually relevant information. Plus, `Ptr` for a unique pointer is
misleading (should be `UPtr` or similar).
Move "using" declarations and member variables to the top of the class.
See https://wiki.blender.org/wiki/Style_Guide/C_Cpp#Class_Layout.
Changes access specifiers of some variables from public/protected to
private, there was no point in not having them private.
- Move main comment on class to header comment where it's more visible.
- Improve comment.
- Move stdlib includes first, like we do it usually
- Separate includes my code module
- Remove unnecessary forward declarations
These materials were missing from the "Change Active Material" menu.
Caused by rBe3faef686d38.
Error was getting the preview [which wasnt there yet]
These only appeared once the material tab in the Properties Editor was
used (since this ensured a valid preview icon).
Above commit changed behavior for RNA icon getter (this does not create
data anymore), so ensure the preview by hand here.
Similar to rB182edd4c35c2.
Fixes T102566.
Maniphest Tasks: T102566
Differential Revision: https://developer.blender.org/D16541
This allows for optimizations because one does not have to iterate
over all nodes anymore to find all nodes within a frame.
Differential Revision: https://developer.blender.org/D16106
The Node Context Menu contains options that are not always available for
the selected nodes, and misses important entries for accesibility.
This patch covers the following:
* Add operators to join and remove nodes from frames.
* Sort and group entries more logically and follow Blender conventions.
* Add `Insert into Group`
* Show group actions only on nodes that support it.
* Move all toggles to a sub-menu called `Show/Hide`.
* When nothing is selected, show Add menu, links actions, and paste.
Inspired by RightClickSelect proposals and community feedback.
See D16216 for images.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D16216
Add a new flag value `CUMA_REMOVE` to explicitly tag duplicate points
for removal. This prevents a bug where all curve points with vector
handles were deleted, when removing duplicate curve points while
updating the widget. This happened, because the flag value used to tag
points for removal was the same as the value of `CUMA_HANDLE_VECTOR`
used to store the handle type of the curve point.
Reviewed By: Hans Goudey
Differential Revision: http://developer.blender.org/D16463
Add a new flag value `CUMA_REMOVE` to explicitly tag duplicate points
for removal. This prevents a bug where all curve points with vector
handles were deleted, when removing duplicate curve points while
updating the widget. This happened, because the flag value used to tag
points for removal was the same as the value of `CUMA_HANDLE_VECTOR`
used to store the handle type of the curve point.
Reviewed By: Hans Goudey
Differential Revision: http://developer.blender.org/D16463
The 1a1341c387 made it so that when ID's path changes the ID is
tagged for the source re-evaluation. Another factor here is that
there is a code in the read file which replaces alternative path
slash with the native one.
Typically it is not a problem since IDs are re-evaluated on load,
but the movie clip has the special handling on load to calculate
the image sequence length and initialize principal point.
This change makes it so that the principal point is only reset
when the clip resolution changes. This is something which is
also useful for cases when a non-centered primncipal point is
used and someone accidentally clicks on the clip reload button.
It is not really ideal but covers most of the common cases.
Ideally the principal point will be stored in relative or
normalized space.
The remaining part is that there is now extra image sequence
length calculation after file load. This needs more careful
look.
The issue here was that the Barbershop benchmark scene was saved with a
custom OCIO config, which leads to some textures having a unknown
colorspace when loading with a default installation.
This is automatically fixed by Blender during image loading, but since
Cycles queried the colorspace before actually loading the image, it
didn't get the updated value in the first render.
To fix this, just re-query the colorspace after the image is loaded.
Note that non-packed images still get treated as raw data if the
colorspace is unknown, but this is at least consistent and doesn't
magically change when you press F12 a second time.
Differential Revision: https://developer.blender.org/D16427
* Sort Training Samples first, since it affects both Surface and Volume guiding.
* Remove "Guiding" from Surface and Volume entries (UI only, the property
still has Guiding in the name)
Change reviewed in the render-cycles module channel.
This was previously needed due to poor compatibility between Visual Studio and
NVCC. But it has not been used for a while now as compatibility seems to have
improved.
Steps to reproduce were:
- Open an asset browser
- Open an asset library with assets in it
- Load a different file (e.g. File -> New -> General)
Didn't see a nice way to fix this with the current pre file load handler
callback we use for freeing asset libraries. Using this is cleaner, but
for now, the relationship between UI and asset system is too close
still, so better do explicit freeing at the right point in time.
The launcher is designed to exit as soon as possible
so there's no useless processes idling. Now when steam
launches blender with the launcher, this breaks the
time tracking steam has as the thing it just started
exits within milliseconds.
There already is some code in the launcher that makes
the launcher linger to support background mode. This
patch extends this a bit to also wait if the parent
process is steam.exe
Reviewed by: brecht lichtwerk dingto
Differential Revision: https://developer.blender.org/D16527
- Move code to manage storage to own class in own file, separates
concerns and different levels of abstraction better.
- Store local ID assets separately in the storage class for more
efficient lookups (e.g. for ID remapping).
- Make API function names and comments more complete.
Blender crashes when enabling Use Nodes after the viewport compositor is
already enabled.
This happens because the active viewer key is not yet initialized for the
node tree at this point, which eventually leads to a nullptr.
This patch fixes that by returning the root context in case the active
viewer key is not yet initialized.
Remove unnecessary (and No-op) normal calculation when sculpting on top
of deformed coordinates. Examples are shape keys and deform modifiers.
On a 1 million face mesh, this saved 100ms per stroke update.
This function actually did nothing since cfa53e0fbe,
so that large improvement comes for free.
Conceptually this is correct because when sculpting on deformed
coordinates, we don't change the positions of the base mesh directly.
In the future it might be better to allocate a separate array for
normals when using deformed coordinates, but it's not clear that's
necessary yet.
Ignore difference between source and target tree type. When copying
nodes from clipboard to target tree compatibility is checked. After
pasting nodes only the links between nodes that are existing in the
node tree are added.
See Task T95033.
Differential Revision: https://developer.blender.org/D16349
As described in T100004, add an output socket that returns true if the
attribute accessed by the node was already present in that context.
Initial patch by Edward (@edward88).
Differential Revision: https://developer.blender.org/D16316
10131a6f62 replaced use of the `ME_EDGERENDER` flag with
`ME_EDGEDRAW`. However, left over from previous refactors, code
for leaving edit mode set that flag based on the edge angle. Edge angle
wireframe hiding is currently supposed to be adjustable with the
wireframe overlay settings. This patch restores the previous behavior
from before the cleanup commit.
Differential Revision: https://developer.blender.org/D16451
The issue here was that the Barbershop benchmark scene was saved with a
custom OCIO config, which leads to some textures having a unknown
colorspace when loading with a default installation.
This is automatically fixed by Blender during image loading, but since
Cycles queried the colorspace before actually loading the image, it
didn't get the updated value in the first render.
To fix this, just re-query the colorspace after the image is loaded.
Note that non-packed images still get treated as raw data if the
colorspace is unknown, but this is at least consistent and doesn't
magically change when you press F12 a second time.
Differential Revision: https://developer.blender.org/D16427
Currently the positions are retrieved again for every vertex. This is
slow, and will get slower when positions are stored as a named
attribute. Saves around 0.5ms per stroke update when a modifier
is active in my test with a 1 million face mesh.
This reverts commit 676137f043.
This change worked locally with a specific test file and local changes,
but didn't work in general, since we don't reliably retrieve the new
looptris after setting them the first time. This can be improved again
in the future, but probably along with a more general look about ownership
is handled with PBVH.
This avoids recalculation of looptri derived triangulation whenever
switching to sculpt mode or whenever the PBVH is rebuilt, which can
happen after strokes in some situations. In my tests actually building
the PBVH is much more expensive (300ms), but this saves 6ms when
switching to sculpt mode and in other situations.
The cost is the possibility of higher memory usage because the cache
will live in the original main database mesh. However, the impact of
that will be smaller when the shared cache concept from D16204 is
applied to this data too.
This assertion function came from when derived normal data was stored
as custom data layers, which made it harder to keep track of whether
it was allocated and propagated. Nowadays it's all relatively easy to
predict, so there's no point in keeping this function around-- it only
makes code longer and more complex looking.
Allow joining of areas that are below our minimum sizes.
See D16522 for more details.
Differential Revision: https://developer.blender.org/D16522
Reviewed by Campbell Barton
Basic test for `quads_convert_to_tris`
As the operator name in blender is different from the bpy name, the operator
name in blender was opted in terms of the blend file collection name as well
as the test name. This was done so that new developers in the future can
easier understand which operator this corresponds to. Although it might be
better to change this to the bpy name so as to be consistent with the rest
of the codebase.
Updated blend file `lib/tests/modeling/operators.blend` has been
committed as rBL63101.
Reviewed By: zazizizou, mont29
Differential Revision: https://developer.blender.org/D16072
Detect unlikely situation of an area (that is smaller than our allowed
minimums) sharing an edge that will be moved during a join.
See D16519 for more details.
Differential Revision: https://developer.blender.org/D16519
Reviewed by Campbell Barton
Jack has not been installed on the buildbot builders for a long time and so
should not be enabled by default to pass strict build options added in D16104.
However for those doing custom builds the option should remain available.
This code mainly tags IDs with `ID_RECALC_SOURCE` when one of their file
paths is modified by `BKE_bpath_foreach_path_id`.
In addition, a check is added to `BKE_sound_evaluate` to call similar
code as when `ID_RECALC_AUDIO` is used.
Finally, Sergey added some changes to relations buildings between
components for Sound IDs in the depsgraph, linking `PARAMETER` to
`AUDIO`.
Maniphest Tasks: T101326
Differential Revision: https://developer.blender.org/D16528
The draw locking was implemented for project Heist and moved behind an experimental
feature after it became clear there were issues with it. Nowadays it isn't used,
and the idea is to replace it with a different solution after all draw engines have
been ported to the new draw manager API. {T102180}
This patch will remove the experimental feature as it isn't used, or useful.
Imgaes which are render results and the like should not be considered as
unused, even if they do not have actual users.
NOTE: this does not apply to 'regular' images, which should be purged by
the recursive purge code, even if they are currently shown in an Image
Editor (this is not actual data usage).
This is really old decision which should have been revisited as soon
as an overlapped release cycle was introduced.
The initial reasoning for such branch name override was to make it so
corrective releases have the same branch as the initial release when
we followed fully linear release cycle.
Nowadays such branch override is confusing and could even be misleading.
There are no add-ons using this property so it is very unlikely that
this is a breaking change.
The `animdata_filter_mask()` was not respecting the filter flag of
`ANIMFILTER_FCURVESONLY` which lead to cases when animation system
element is effectively cast from `MaskLayer*` to `FCurve*`.
The proposed solution more closely follows the GreasePencil filtering
makes it so when `ANIMFILTER_FCURVESONLY` flag is uses no mask layer
channels will be added.
Differential Revision: https://developer.blender.org/D16498
The N in `Compiling Shaders N` in Text Info, is the number of how many
shaders are left in the queue. It's a countdown, but this wasn't mentioned
and led to confusion.
Ideally this text would be like Cycles' "Samples 50/100", but in EEVEE it's
not easy to guess how many shaders are left (this number could even go
up mid-compilation).
In the past there used to be a progress bar but it's also confusing because
it could be 90/100 shaders done, but the remaining 10 are slow to compile.
Change the text to "Compiling Shaders (N remaining)" so it's easier to
understand what is going on. Similar to how some game engines do.
Nodes that were not connected to any output could still impact performance.
While they were never executed, sometimes their inputs could keep references
to geometries that other nodes want to modify. That caused unnecessary geometry
copies, because a geometry can only be modified if it is not shared.
Now, inputs that will never be used are tagged accordingly and they will never
have references to geometries that others might want to modify.
If the edge you are going to slide along is very close to in line
with the adjacent beveled edge, then there will be sharp overshoots.
There is an epsilon comparison to just abandon loop slide if this
situation is happening. That epsilon used to be 0.25 radians, but
bug T86768 complained that that value was too high, so it was changed
to .0001 radians (5 millidegrees). Now this current bug shows that
that was too aggressively small, so this change ups it by a factor
of 10, to .001 radians (5 centidegrees). All previous bug reports
remained fixed.
I18n: make a few messages translatable
* Missing Paths * in the Presets menu when no preset exists yet.
The White Noise entry in the Add Node menu is the only one lacking a "Texture" suffix, which doesn't seem justified since the node itself is already called "White Noise Texture". Rename the entry its name can be extracted and used for the node--and for consistency.
New object material node names (Principled BSDF, Material Output) come from a preset node tree. The nodes' names need to be translated after creation.
Extract the "Fallback Tool" pie menu title.
Translate grease pencil options in the viewport overlay menu.
Ref T102030.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D16345
Many reports and a few labels used string formatting without
explicitly calling tip_() or iface_(), so the untranslated message
was used instead of the translated one, even when it was extracted.
Differential Revision: https://developer.blender.org/D16405
The default name when saving a screen capture in an unsaved .blend
file is "screen.<ext>". This can be translated.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D16486
This only applies to procedural operations rather than edit mode
operations, but it might save some recalculations of these caches
for the transform geometry node in some cases.
The calls in the remesh operator were unnecessary because the mesh is
about to be replaced anyway, and nothing invalidates the caches, and
the call in BMesh -> Mesh conversion was unnecessary because the caches
are cleared at the top of the function already.
These were redundant for one of a few reasons:
- A call to `BKE_mesh_tag_coords_changed` was correct instead
- A mesh has dirty normals when created from scratch anyway
- The call was redundant with `BKE_mesh_runtime_clear_geometry`
Separate freeing and clearing mesh runtime data in a more obvious way.
This makes it easier to see what data is meant to be cleared on certain
changes, rather than conflating it with freeing all of the runtime
caches.
Also comment and reduce the surface area of the "mesh runtime" API.
The redundancy in some functions made it confusing which one should
be used, resulting in subtle bugs or unnecessary boilerplate code.
Also, now bke::MeshRuntime is able to free all the data it owns by
itself, which makes this area easier to reason about. That required
changing the interface of a few functions to avoid passing Mesh when
they really just dealt with some runtime struct.
With more RAII semantics in the future, more of this manual freeing
will become unnecessary.
Some of these functions should use locks although they didn't show up
as needing locks at runtime (using valgrind's helgrind), as some aren't
called often or aren't used at all. Add locks for correctness & to
prevent errors in the future.
- GHOST_SystemWayland::disposeContext
- GHOST_SystemWayland::getAllDisplayDimensions
- GHOST_SystemWayland::getButtons
- GHOST_SystemWayland::getMainDisplayDimensions
- GHOST_SystemWayland::getNumDisplays
- GHOST_WindowWayland::setWindowCustomCursorShape
libdecor has a workaround where creating the window would loop until
the windows configure callback ran.
Simplify this workaround by setting the initial state on the underlying
xdg_toplevel struct.
Also correct mixup between bool / GHOST_TSuccess types.
Also, single point cyclic Catmull Rom curves aren't evaluated properly.
Cyclic is meant to make no difference in that case. Now they correctly
evaluate to a single point.
After rB716ea1547989 the UV overlay is no longer displayed in
the UV Editor. It only appears for the Image Editor.
So restore the previous behavior, displaying the "UV shadow"
overlay in the UV editor as well.
Reviewed By: Jeroen Bakker, Germano Cavalcante
Maniphest Tasks: T92614, T100926
Differential Revision: https://developer.blender.org/D16490
When dragging out a boolean noodle, releasing and choosing
'switch > Switch' from the search popup, the code would mistakenly
search for 'Start' instead of 'Switch'.
Also the function called was not exactly the right one, leading to the
node being marked as invalid.
Reviewed By: Jacques Lucke
Differential Revision: https://developer.blender.org/D16512
Bounding box calculation can be a large in some situations, especially
instancing. This patch caches the min and max of the bounding box in
runtime data of meshes, point clouds, and curves, implementing part of
T96968.
Bounds are now calculated lazily-- only after they are tagged dirty.
Also, cached bounds are also shared when copying geometry data-blocks
that have equivalent data. When bounds are calculated on an evaluated
data-block, they are also accessible on the original, and the next
evaluated ID will also share them. A geometry will stop sharing bounds
as soon as its positions (or radii) are changed.
Just caching the bounds gave a 2-3x speedup with thousands of mesh
geometry instances in the viewport. Sharing the bounds can eliminate
recalculations entirely in cases like copying meshes in geometry nodes
or the selection paint brush in curves sculpt mode, which causes a
reevaluation but doesn't change the positions.
**Implementation**
The sharing is achieved with a `shared_ptr` that points to a cache mutex
(from D16419) and the cached bounds data. When geometries are copied,
the bounds are shared by default, and only "un-shared" when the bounds
are tagged dirty.
Point clouds have a new runtime struct to store this data. Functions
for tagging the data dirty are improved for added for point clouds
and improved for curves. A missing tag has also been fixed for mesh
sculpt mode.
**Future**
There are further improvements which can be worked on next
- Apply changes to volume objects and other types where it makes sense
- Continue cleanup changes described in T96968
- Apply shared cache design to more expensive data like triangulation
or normals
Differential Revision: https://developer.blender.org/D16204
Previously the UV unwrapping handling for subsurf modifiers used
`DerivedMesh`to implement the subdivision. Since we're trying to remove
`DerivedMesh` in general, and since this just made use of the `Mesh`
data anyway, it's relatively simple to remove it here. Combined with
D15939, this makes it possible to remove more `DerivedMesh` code.
Differential Revision: https://developer.blender.org/D16487
Using a vector to store assets means we have to lookup the position of
the asset to be able to remove/free it. Use a `blender::Set` instead for
(nearly?) constant time removal.
Mask from cavity can now pull settings from three
places: the operator properties, scene tool settings
or the brush. This is needed to make the "create mask"
button work as expected.
Mask from cavity can now pull settings from three
places: the operator properties, scene tool settings
or the brush. This is needed to make the "create mask"
button work as expected.
Asset library data is destructed on file load. Asset lists (weak and
hopefully temporary design) contain pointers into it that would dangle
then. Make sure the asset lists are destructed before the asset library
data.
Previously these were only written to the console with no UI feedback
whatsoever. Just a bit nicer to give the user some info that something
went wrong.
See also T102495.
Differential Revision: https://developer.blender.org/D15732
Cycles already treats denoising fairly separate in its code, with a
dedicated `Denoiser` base class used to describe denoising
behavior. That class has been fully implemented for OIDN
(`denoiser_oidn.cpp`), but for OptiX was mostly empty
(`denoiser_optix.cpp`) and denoising was instead implemented in
the OptiX device. That meant denoising code was split over various
files and directories, making it a bit awkward to work with. This
patch moves the OptiX denoising implementation into the existing
`OptiXDenoiser` class, so that everything is in one place. There are
no functional changes, code has been mostly moved as-is. To
retain support for potential other denoiser implementations based
on a GPU device in the future, the `DeviceDenoiser` base class was
kept and slightly extended (and its file renamed to
`denoiser_gpu.cpp` to follow similar naming rules as
`path_trace_work_*.cpp`).
Differential Revision: https://developer.blender.org/D16502
Include the node name and parameter index in the variable name for easier debugging.
(Enabled for debug builds only)
Reviewed By: fclem, jbakker
Differential Revision: https://developer.blender.org/D16496
The main problem is that the node tree was not properly updated
after a property in the tree changed. More specifically, the collection
pointer in the Collection Info node was cleared, but the node tree
was not updated after that (usually this is handled by rna updates).
Differential Revision: https://developer.blender.org/D16289
Some operator layout buttons with custom text did not get the proper
context: they'd get * instead of Operator.
This was probably never noticed because the only operator that
actually had this issue was Import Images as Planes in the Add menu.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15993
The property assignment operators' tooltips were never actually
translated when they were constructed dynamically from the description
in the prop's RNA.
This was visible when using such operators in menus (example I found
was the Marker Settings, Shift + E in the Movie Clip Editor).
"%s: %s" is already extracted elsewhere, might as well use it.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D16439
- The label for modal keymaps was extracted but did not use the proper
context on translation.
- Same goes for modal keymap items.
- Extract the UI messages from rna_keymap_ui.py
- Translate global keymap names.
- Use the proper context in the status bar for the tool prompt operator
Ref T102071
Maniphest Tasks: T102071
Differential Revision: https://developer.blender.org/D16348
Grease pencil data keyframes were listed twice in the summary.
First by the generic object data listing,
which did not handle properly grease pencil objects,
and did not account for the grease pencil filter.
Second by the specific grease pencil function.
Now only the second call is made,
and the filter hides keyframes in summary as well.
Reviewed By : Jeroen Bakker, Falk David
Differential Revision: https://developer.blender.org/D16369
Operations to rearrange channels in the main dopesheet
did not cover grease pencil layer channels.
Now grease pencil layer channels can be moved up and down
in the main dopesheet just like other channels.
Reviewed By: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D15542
Regression introduced by {rB601995c3b86986cf8f8e5b6e5a65bcfa7f8f2e32}.
Noticed by Heist project as they render final frames with workarounds enabled.
The mentioned patch introduces attaching VBO as textures. This used to be
done by the caller. The mechanism used a different order hence the VBO
could still be unbound when using. This cannot be solved inside the new
mechanism clearly so this patch will just bind when the buffer isn't bound
just before the drawing command is sent to the GPU driver.
Avoid keeping allocated overly large events_pending vector in case of
long delays between processing events.
While in practice this isn't likely to cause problems, it's better to
avoid keeping unnecessarily large allocations.
Also remove invalid comment.
Consume events in a thread to prevent Wayland's event buffer from
overflowing Waylands internal buffer and closing the connection.
From a users perspective this seemed like a crash.
Details:
- This is a workaround for a known bug in Wayland [0].
Threaded event handling has been if-defed so it can be removed when
it's no longer needed.
- GTK & QT use threaded event handling to avoid this problem
(SDL on the other hand doesn't).
- The complexity and number of locks needed to handle events in a
separate thread is a significant down-side, but as far as I can see
this is necessary.
- Re-connecting to the Wayland server is possible but not practical as
the OpenGL context is lost and as far as I can tell it's not possible
to keep it active (see: D16492).
[0]: https://gitlab.freedesktop.org/wayland/wayland/-/issues/159
Using a single draw works in my tests and I couldn't reproduce the
issue noted in the comment.
Also apply minor cleanup, assigning a variable before calling methods to
reduce diff-noise in planned changes.
This commit adds a new "Image Info" node to retrieve various
information from an image like its width, height, and whether
it has an alpha channel. It is also possible to retrieve the FPS
and frame count of video files.
Differential Revision: https://developer.blender.org/D15042
Adjusts behavior for trimming Bezier curves, specifically the outer
Bezier handles for the endpoints which do not influence the actual
curve. Handles are only adjusted if they lie within the same segment
with at most one endpoint being a control point (unless they are the
same in which handles are set to the point itself). The result yields
a curve in which the trim result can be inverted by re-setting the
cyclic property for the curve using 'Set Spline Cyclic' node
(iff both trim endpoints lie within a segment).
Differential Revision: https://developer.blender.org/D16488
Patch fixes versioning issue with NURBS files saved with Blender
version from commit 45d038181a to 0602852860 and opened with
Blender version from commit 0602852860. Cyclic Bezier NURBS
saved and then opened with Blender versions mentioned above
changed their shape.
Bug was reported in comments of T101160, circle problem.
Differential Revision: https://developer.blender.org/D16503
The weird code dealing with `MeshPrimitive` didn't increment the
material indices pointer for geometry types besides triangle fans.
Also use a proper accessor to avoid adding a duplicate material
indices attribute, just in case this code is used on existing meshes.
Selection range is +/-7 pixels to actual clicked position, but strip selection
was biased towards rightmost strip.
To make selection more intuitive, select closest strip to clicked position, and
stop iterating when strip intersects clicked pixel.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D15728
To override the default quality and filepath. After changes to unify the image
operator and this method, the quality changed from 75 to 90 to make both
consistent. However there was no way to lower the quality to match the previous
behavior, this adds support for that.
Ref T102421
Though they are sometimes used by users of the BVH tree, mostly
vertex normals when building the BVH tree is unnecessary. Skip it
instead and avoid storing the vertex normals in the BVH tree cache.
They are just calculated in the few places they are actually needed.
This should save at least a few percent of the runtime in some cases
where the normals weren't needed otherwise.
This gives a friendlier interface, an inline buffer, RAII, etc.
Also switch some BMesh functions that were only used by the snap
system's use of BVH utils.
Generally the `extern "C" {` brackets shouldn't be added around other
headers since it causes problems when using C++ features in them.
Follow that convention for the "bmesh.h" header.
This patch adds a "Show Gizmo" toggle to the Movie Clip Editor header, for consistency with other editors.
{F13892765}
Differential Revision: https://developer.blender.org/D16437
Render time is reduced for overexposed scenes, by taking into account absolute
light intensity for adaptive sampling.
This can negatively affect some scenes where compositing or color management
are used to make the scene much darker or lighter. For best results adjust the
Film > Exposure setting to bring the intensity into a good range, and then do
further compositing and color management on top of that. Note that this setting
is different than color management exposure.
Previously Cycles' adaptive sampling used sqrt(I) to normalize noise level to
conform to a viewer's eye sensitivity. It is great for darker regions of the
image, but also requests too much samples in bright regions, sometimes several
times more than needed. Highlights can tolerate more noise because in most
examples it is still less noticeable then the noise in darker areas in the same
render.
Differential Revision: https://developer.blender.org/D16392
Disable the zoom in and out buttons on the when they would have no effect.
This also removes an incorrect comment that indicates the maximum zoom level
was 20x when in fact it was 25x.
Differential Revision: https://developer.blender.org/D16252
The anims data is a runtime cache similar to the image buffer or GPU texture
and needs to be preserved through undo in the same way.
Found as part of D15042 development.
Adds a new `source/blender/asset_system` directory and moves asset
related files from BKE to it. More asset related code can follow
(e.g. asset indexing, ED_assetlist stuff) but needs further work to
untangle it. I also kept `BKE_asset.h` and `asset.cc` as is, since they
deal with asset DNA data mostly, thus make sense in BKE.
Motivation:
- Makes the asset system design more present (term wasn't even used in
code before).
- An `asset_system` directory is quite descriptive (trivial to identify
core asset system features) and makes it easy to find asset code.
- Asset system is mostly runtime data, with little relation to other
`Main`/BKE/DNA types.
- There's a lot of stuff in BKE already. It shouldn't be just a dump for
all stuff that seems core enough.
- Being its own directly helps us be more mindful about encapsulating
the module well, and avoiding dependencies on other modules.
- We can be more free with splitting files here than in BKE.
- In future there might be an asset system BPY module, which would then
map quite nicely to the `asset_system` directory.
Checked with some other core devs, consensus seems that this makes
sense.
Ensure each graph material_function only evaluates the input links that are connected to it.
Differential Revision: https://developer.blender.org/D16425
This implements the base needed for supporting multiple view concurently
inside the same drawcall.
The view used by common macros and view related functions is indexed using
a global variable `drw_view_id` which can be set arbitrarly or read
from the `drw_ResourceID`.
This is needed for EEVEE-Next shadow but can be used for other purpose
in the future.
Note that a shader specialization is needed for it to work. `DRW_VIEW_LEN`
needs to be defined to the amount of view the shader will access.
The number of views contained in a `draw::View` is set at construction
time.
Note that the maximum number of object correctly drawn by the shaders
using multiple views will be lower than thoses who don't.
Without this, a fatal error simply floods the stderr with the same
message without exiting.
Also add note on why reconnecting to the display server isn't practical.
If the edge you are going to slide along is very close to in line
with the adjacent beveled edge, then there will be sharp overshoots.
There is an epsilon comparison to just abandon loop slide if this
situation is happening. That epsilon used to be 0.25 radians, but
bug T86768 complained that that value was too high, so it was changed
to .0001 radians (5 millidegrees). Now this current bug shows that
that was too aggressively small, so this change ups it by a factor
of 10, to .001 radians (5 centidegrees). All previous bug reports
remained fixed.
Implement a new topology-based copy and paste solution for UVs.
Usage notes:
* Open the UV Editor
* Use the selection tools to select a Quad joined to a Triangle joined to another Quad.
* From the menu, choose UV > UV Copy
* The UV co-ordinates for your quad<=>tri<=>quad are now stored internally
* Use the selection tools to select a different Quad joined to a Triangle joined to a Quad.
* (Optional) From the menu, choose UV > Split > Selection
* From the menu, choose UV > UV Paste
* The UV co-ordinates for the new selection will be moved to match the stored UVs.
Repeat selection / UV Paste steps as many times as desired.
For performance considerations, see https://en.wikipedia.org/wiki/Graph_isomorphism_problem
In theory, UV Copy and Paste should work with all UV selection modes.
Please report any problems.
A copy has been made of the Graph Isomorphism code from https://github.com/stefanoquer/graphISO
Copyright (c) 2019 Stefano Quer stefano.quer@polito.it GPL v3 or later.
Additional integration code Copyright (c) 2022 by Blender Foundation, GPL v2 or later.
Maniphest Tasks: T77911
Differential Revision: https://developer.blender.org/D16278
OSD Lists as 0, 0, 0 this is due to opensubdiv_capi.cc not actually including
the OSD version header, so it's not getting the version define, and the code
in openSubdiv_getVersionHex is really well prepared to deal with any or no
version at all of OSD, catches the problem and returns 0, 0, 0
Given this file is only build when OSD is enabled we can just blindly include
opensubdiv/version.h here
Reviewed by: brecht
Differential Revision: https://developer.blender.org/D16398
* Support bidirectional type lookups. E.g. finding the base type of a
field was supported, but not the other way around. This also removes
the todo in `get_vector_type`. To achieve this, types have to be
registered up-front.
* Separate `CPPType` from other "type traits". For example, previously
`ValueOrFieldCPPType` adds additional behavior on top of `CPPType`.
Previously, it was a subclass, now it just contains a reference to the
`CPPType` it corresponds to. This follows the composition-over-inheritance
idea. This makes it easier to have self-contained "type traits" without
having to put everything into `CPPType`.
Differential Revision: https://developer.blender.org/D16479
rBa8f7d41d3898 added a "duplicate" check for being in curves sculptmode
unnecessarily afaict (`in_sculpt_curve_mode` in addition to the
previously existing `in_curves_sculpt_mode`).
Over time, the later evolved to also take into account the output of a
viewer node, see rBc55d38f00b8c (the previously existing
`in_curves_sculpt_mode` did not receive this).
This all results in the fact that selection is not drawn with a viewer
node (can be useful though, and there are separate opacity controls for
both selection and the viewer attribute, so these can be used/blended to
everyones liking).
So now deduplicate the check.
Differential Revision: https://developer.blender.org/D16467
A Loop to poly map was passed as an optional output to the loop normal
calculation. That meant it was often recalculated more than necessary.
Instead, treat it as an optional argument. This also helps relieve
unnecessary responsibilities from the already-complicated loop normal
calculation code.
It wasn't so obvious which functions were part of the GHOST API
and which system functions were utilities.
This convention was already in place but not always followed.
Add a non-blocking version wrapper for wl_display_dispatch_pending.
This uses roughly the same logic as Wayland_PumpEvents in SDL.
Noticed this when investigating T100855.
Note that performing a round-trip doesn't seem necessary from looking
into QT/GTK & SDL event handling loops.
This test is disabled for the following reasons:
This test is one of the longer ones in this suite (2979 out of 3559ms total)
and nothing is currently monitoring the performance, if this test were to be
20% slower one day, no-one would actually notice.
there are no asserts, the test actually cannot fail.
it's good to have some benchmark code, so like some of the other mesh
benchmark code, exclude it using an `#ifdef` guard so i can be easily
re-enabled when needed.
reviewed by: jbakker
Differential Revision: https://developer.blender.org/D16314
The OSL GPU services implementation of "osl_get_matrix" and
"osl_get_inverse_matrix" was missing support for the "common",
"shader" and "object" matrices and thus any matrix operations in OSL
shaders using these would not work. This patch adds the proper
implementation copied from the OSL CPU services.
Maniphest Tasks: T101222
A number of operators were missing poll messages when disabled.
These are the following new error messages:
1. "No markers are selected"
2. "Markers are locked"
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D16403
This is a clean-up pass that eliminates a few problematic patterns:
* Eliminating redundant parentheses around simple expressions.
* Combing declaration and assignment of variables where appropriate.
* Moving variable declarations closer to their first use.
* Many variables and arguments have been marked as `const`.
* Using `LISTBASE_FOREACH_*` variants where applicable instead of
manually managing loop control flow.
There are no functional changes.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D16459
The "visibility_instances.blend" cycles test was failing..
The stack of dupli generator types added in e508de0417
wasn't "popped" correctly after recursive duplis were generated.
This patch adapts D14754 for the Metal backend. Kernels of the same type are already organised into subdirectories which simplifies type matching.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D16469
Show RGB value "1.000" instead of "1", jus like HSV mode. Also uses full labels
"Red", "Green" and "Blue" rather than the shortened labels "R", "G" and "B",
for both RGB and HSV.
Differential Revision: https://developer.blender.org/D14387
Commit c8dd33f5a37b6a6db0b6950d24f9a7cff5ceb799 in OSL
changed behavior of shader parameters that reference each other
and are also overwritten with an instance value.
This is causing the "NormalIn" parameter of a few OSL nodes in
Cycles to be set to zero somehow, which should instead have
received the value from a "node_geometry" node Cycles generates
and connects automatically. I am not entirely sure why that is
happening, but these parameters are superfluous anyway, since
OSL already provides the necessary data in the global variable "N".
So this patch simply removes those parameters (which mimics
SVM, where these parameters do not exist either), which also
fixes the rendering artifacts that occured with recent OSL.
Maniphest Tasks: T101222
Differential Revision: https://developer.blender.org/D16470
Previously the `CustomData_add_layer` function always returned
the existing layer data when used for types that can only have one
layer. This made it work like an "ensure layer exists" function for those
types. That was used in various places to make code more concise.
0a7308a0f1 changed that to always "recreate" the layer even
when it existed. Maybe this is more logical for an "add layer" function,
but that's not clear, and it breaks a bunch of existing code that relied
on the current behavior. Rather than spending a bunch of time going
through uses of the CustomData API, this patch resets the behavior
to what it was before, but adds an assert and a comment to help
avoid memory leaks and other issues. We should focus on moving
to the attribute API instead.
Differential Revision: https://developer.blender.org/D16458
Code in `deg_object_hide_original` uses the dupli object type to decide
whether to hide the original object. The geometry component system
changed the dupli object generator types, which made this not work.
To maintain existing behavior, maintain a stack of non-geometry-nodes
generator types while building the dupli list, and assign that to the
dupli object instead.
I think this code is on its last legs. It can't handle too many more
hacky fixes like this, and should be replaced soon. Hopefully that is
possible by using a `bke::Instances` type instead. However, this
bug is bad enough that it's worth fixing like this.
Differential Revisions: https://developer.blender.org/D16460
This random number is intended to be unique for every instance, however for
some cases with more than one level of nesting this was failing. This also
affected curves after they were refactored to use geometry sets.
For simple cases the random number is the same as before, however for more
complex nesting it will be different than before, changing the render result.
As part of rB3f91540cef7e, we already made `OB_MODE_SCULPT_CURVES` to be
allowed in `paint_curve_poll` (alongside `OB_MODE_ALL_PAINT`).
Now, to get the paintcurves transform systems to work with curves
sculptmode as well, we introduce this "additional case" in the
appropriate place in the transform system as well.
NOTE: as a next step, considering `OB_MODE_SCULPT_CURVES` to be
generally part of `OB_MODE_ALL_PAINT` is to be done (this might fix
another couple of bugs, but also has to be carefully checked in many
places, so this patch is just fixing this very specific case)
Fixes T102204.
Maniphest Tasks: T102204
Differential Revision: https://developer.blender.org/D16466
This was caused by rBc39eb09ae587e1d9. The optimization broke the case
when the socket is not in the provided node tree. Now there are two separate
functions, one that always does the slow check to see of the socket is really
in the node tree and a potentially much faster version when we are sure
that the socket is in the tree.
The viewport cleans up old subdivision buffers right after drawing.
During rendering this was not done and when rendering many frames
this lead to memory issues.
This patch will also clear up the GPU Subdivision buffers after any
offscreen render or final render. There is already a mutex so this
is safe to be done from a non main thread.
Thanks to @kevindietrich to finding the root cause.
Instead of CustomDataLayer, which exposes the internal implementation
more than necessary, and requires that the layer is always available,
which isn't always true.
Implements an operator to convert color attributes in
available domains and types, as described in T97106.
Differential Revision: https://developer.blender.org/D15596
The modifier needs a scene camera to work. Now
if the camera is not defined, there is a warning.
The optimal solution would be to use the `isDisabled` callback
but the callback function hasn't the scene parameter and to pass
this parameter is necessary to change a lot of things and now
we are focus in the next version of GPencil 3.0 and this change
not worth the work now.
The optimal solution will be implemented in the 3.0 refactor.
Related to T102375
Reviewed by: Pablo Vazquez, Matias Mendiola
The sculpt symmetrize operator's merge threshold now defaults
to 0.0005 instead of 0.001, which tends to be a bit too big for
metric scale.
Also changed its step and precision a bit to be more usable.
This is a minor naming update to make the box hide and show operators in sculpt mode follow current naming conventions.
Reviewed by: Joseph Eagar
Differential Revision: https://developer.blender.org/D16413
Ref D16413
With db40b62252 there have been various UI adjustments and improved renaming.
The Mask From Cavity menu operator didn't follow this new naming yet.
Reviewed By: Joseph Eagar
Differential Revision: https://developer.blender.org/D16409
Ref D16409
LLVM could kill the process during OSL PTX code generation, due
to generated symbols contained invalid characters in their name.
Those names are generated by Cycles and were not properly filtered:
- If the locale was set to something other than the minimal locale
(when Blender was built with WITH_INTERNATIONAL), pointers
may be printed with grouping characters, like commas or dots,
added to them.
- Material names from Blender may contain the full range of UTF8
characters.
This fixes those cases by forcing the locale used in the symbol name
generation to the minimal locale and using the material name hash
instead of the actual material name string.
The crash happened because the geometry nodes modifier is evaluated
before the node tree has been preprocessed. While there was a transitive
but non-flushing relation between these two depsgraph nodes.
However the relation between the modifier and the `ntree_output` depsgraph
node was ignored, because it had `DEPSOP_FLAG_NEEDS_UPDATE` *not* set
(which is actually correct, because not all node tree changes change its output).
Because this relation is ignored (e.g. in `calculate_pending_parents_for_node`)
the transitive relation is ignored as well.
The solution in this patch is to explicitly add this transitive non-flushing relation
to make sure the modifier only runs after the node tree has been preprocessed,
even when the node tree output has not changed. An alternative fix could be
to handle all links always but skip the execution of depsgraph nodes that are not
needed. This way all links are always taken into account. This solution would
require some deeper changes though and would be much more risky.
Also fixes T102402.
Some of the previous commits in Wayland related code added use
of this function, but did not update the dynamic loader. This
broke compilation of configurations which use dynamic loader
for Wayland (which is the official way oh how Blender is built).
The meta strip operator is available in the Add menu, but not in the
context menu.
This patch adds these two operators to the context menu:
* nla.meta_add
* nla.meta_remove
Reviewed By: sybren, RiggingDojo
Differential Revision: https://developer.blender.org/D16353
Using output nodes inside node groups in compositor node trees doesn't
work for the realtime compositor.
Currently, the realtime compositor only considers top level output
nodes. That means if a user edits a node group and adds an output node
in the group, the output node outside of the node group will still be
used, which breaks the temporary viewers workflow where users debug
results inside a node group.
This patch fixes that by first considering the output nodes in the
active context, then consider the root context as a fallback. This is
mostly consistent with the CPU compositor, but the realtime compositor
allow viewing node group output nodes even if no output nodes exist at
the top level context.
Differential Revision: https://developer.blender.org/D16446
Reviewed By: Clement Foucault
`DeviceManager.h` uses `std::string` without explicitly including
the `<string>` header. While older MSVC implicitly included this
header somewhere, the headers for 17.4+ do not leading to a build
error.
Set the created frame node to be the active node when joining nodes
with the `NODE_OT_join` operator.
This behavior was unintentonaly changed in rB545fb528d5e1 when the
operator's execute function was simplified by utilizing the node tree
topology cache.
Reviewed By: Hans Goudey
Differential Revision: http://developer.blender.org/D16440
The conversion is only able to handle NURBS curves with at least three
points. This commit just avoids the crash for shorter curves. If this
ends up confusing users, an error message could be added in the future.
Properly initialize clump curve mapping tables for duplis and other cases
where this was missed by making a generic init/free function instead of
duplicating the same logic in multiple places. Also fold lattice deform
init into this.
Introduces a new `AssetRepresentation` type, as a runtime only container
to hold asset information. It is supposed to become _the_ main way to
represent and refer to assets in the asset system, see T87235. It can
store things like the asset name, asset traits, preview and other asset
metadata.
Technical documentation:
https://wiki.blender.org/wiki/Source/Architecture/Asset_System/Back_End#Asset_Representation.
By introducing a proper asset representation type, we do an important
step away from the previous, non-optimal representation of assets as
files in the file browser backend, and towards the asset system as
backend. It should replace the temporary & hacky `AssetHandle` design in
the near future. Note that the loading of asset data still happens
through the file browser backend, check the linked to Wiki page for more
information on that.
As a side-effect, asset metadata isn't stored in file browser file
entries when browsing with link/append anymore. Don't think this was
ever used, but scripts may have accessed this. Can be brought back if
there's a need for it.
When the materal slot index on mesh faces exceeds the number of slots, rendering
would use the last material slot while other operations like baking would fall
back to the default material.
Now consistently use the last material slot in such cases, since preserving
backwards compatibility for rendering seems most important. And if there is
one material slot, it's more useful to use that one rather than falling back
to the default material.
Correct trim for cyclical curves mentioned in T101379, splitting the
curves if the start/endpoint is at the 'loop point'.
Correct implementation based on comments in D14481, request was made to
use 'foreach_curve_by_type' to computing the point lookups.
Included corrections from D16066 as it may not be a adopted solution.
Exposed selection input by adding it as input to the node.
Note: This is disabled for 3.4 to avoid making UI changes in Bcon3.
Differential Revision: https://developer.blender.org/D16161
Small change to the text sample used for Korean font previews
See D16428 for details.
Differential Revision: https://developer.blender.org/D16428
Reviewed by Brecht Van Lommel
Replace our Noto Sans CJK with a version that has Simplified Chinese
set as the default script.
See D16426 for details and examples
Differential Revision: https://developer.blender.org/D16426
Reviewed by Brecht Van Lommel
Replace our Noto Sans CJK with a version that has Simplified Chinese
set as the default script.
See D16426 for details and examples
Differential Revision: https://developer.blender.org/D16426
Reviewed by Brecht Van Lommel
rB67e23b4b2967 revealed the bug. But the bug already existed before,
it just wasn't triggered.
Apparently the problem happens because the python code generated in
`initGuiding()` cannot be executed twice.
The second time the `initGuiding()` code is executed, the local python
variables are removed to make way for the others, but the reference to
one of the grids in a `Solver` object (name='solver_guiding2') is still
being used somewhere. So an error is raised and a crash is forced.
The solution is to prevent the python code in `initGuiding()` from being
executed twice.
When `FLUID_DOMAIN_ACTIVE_GUIDE` is in `fds->active_fields` this
indicates that the pointer in `mPhiGuideIn` has been set and the guiding
is already computed (does not need to be computed again).
Maniphest Tasks: T102257
Differential Revision: https://developer.blender.org/D16416
rB67e23b4b2967 revealed the bug. But the bug already existed before,
it just wasn't triggered.
Apparently the problem happens because the python code generated in
`initGuiding()` cannot be executed twice.
The second time the `initGuiding()` code is executed, the local python
variables are removed to make way for the others, but the reference to
one of the grids in a `Solver` object (name='solver_guiding2') is still
being used somewhere. So an error is raised and a crash is forced.
The solution is to prevent the python code in `initGuiding()` from being
executed twice.
When `FLUID_DOMAIN_ACTIVE_GUIDE` is in `fds->active_fields` this
indicates that the pointer in `mPhiGuideIn` has been set and the guiding
is already computed (does not need to be computed again).
Maniphest Tasks: T102257
Differential Revision: https://developer.blender.org/D16416
This patch generalizes the OSL support in Cycles to include GPU
device types and adds an implementation for that in the OptiX
device. There are some caveats still, including simplified texturing
due to lack of OIIO on the GPU and a few missing OSL intrinsics.
Note that this is incomplete and missing an update to the OSL
library before being enabled! The implementation is already
committed now to simplify further development.
Maniphest Tasks: T101222
Differential Revision: https://developer.blender.org/D15902
The issue was introduced by the optimization of hidden objects and modifiers
in the f12f7800c2.
The solution here detects that either an object is hidden or the modifier is
disabled and does special tricks to ensure the dependencies are evaluated.
This is done by constructing a separate minimal dependency graph needed for
the object on which the modifier is being applied on. This minimal dependency
graph will not perform visibility optimization, making it so modifier
dependencies are ensured to be evaluated.
The downside of such approach is that some dependencies which are not needed
for the modifier are still evaluated. There is no currently an easy way to
avoid this. At least not without introducing possible race conditions with
other dependency graphs.
If the performance of applying modifiers in such cases becomes a problem the
possible solution would be to create a temporary object with a single modifier
so that only minimal set of dependencies is pulled in the minimal dependency
graph.
Differential Revision: https://developer.blender.org/D16421
When using two transformed compositor results, the transformation of one
of them is apparently in the local space of the other, while it should
be applied in the global space instead.
In order to realize a compositor result on a certain operation domain,
the domain of the result is projected on the operation domain and later
realized. This is done by multiplying by the inverse of the operation
domain. However, the order of multiplication was inverted, so the
transformation was applied in the local space of the operation domain.
This patch fixes that by inverting the order of multiplication in domain
realization.
The Equalize Handles and Snap Keys operators would allow the user to
invoke them successfully even when they would have no effect due to
there not being any selected control points.
This patch makes it so that an error is displayed when these operators
are invoked with no control points are selected.
The reason this is in the `invoke` function is because it would be too
expensive to run this check in the `poll` function since it requires a
linear search through all the keys of all the visible F-Curves.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D16390
libdecor (for window decorations) was crashing on exit with the shader
builder, avoid the crash by calling the "background" system creation
function which doesn't initialize window management under Wayland.
libdecor (for window decorations) was crashing on exit with the shader
builder, avoid the crash by calling the "background" system creation
function which doesn't initialize window management under Wayland.
Re-order checks to ensure a zeroed matrix results in a quaternion
without rotation. Also avoid some redundant calculation where the
'trace' was calculated but not used, flip the scaling value early
on instead of negating the quaternion after calculating it.
This fixes a bug in the function that determines what properties to show
on the Decimate Keyframes operator.
Before the fix, the "Remove" (i.e., `factor`) slider was visible no
matter what "Mode" was being used. This meant that the slider was
visible and modifiable when it had no effect, creating confusion.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D16318
In anticipation of UV Copy+Paste, we need fast access to indices
of unique UvElements. Can also be used to improve performance and
simplify code for UV Sculpt tools and UV Stitch.
No user visible changes expected.
Maniphest Tasks: T77911
See also: D16278
The issue was caused by refactoring, see 7afcfe111a. Function
`SEQ_transform_fix_single_image_seq_offsets` modified offsets after
handle was moved, but this was not done correctly.
Remove function mentioned above and move strip start when moving left
handle of strips that have only single frame of content by design
(image, text, color, ...).
Motivated by long loading times in T101969, reduces render preparation time from 14sec to 6sec.
Another possible improvement would be to use C++ and template based on OCIO vs. sRGB,
but moving the file to C++ seems nontrivial (and opens up the question whether ocio_capi
makes any sense then or we should just use OCIO directly) so I left it at a direct 1:1
parallelization of the existing code for now.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D16317
Simplify API and improve accuracy of uv packing placement
by using pre-translation and double precision internally.
Will protect against future precision problems with UDIM.
No user visible changes expected.
Maniphest Tasks: T68889
Differential Revision: https://developer.blender.org/D16362
The preferred domain is used to decide which domain the viewer node
should use when set to "Auto" domain. This commit adds it to some curve
input nodes and the curve and mesh topology nodes. This makes debugging
node setups with these nodes a bit faster and less frustrating.
The "all curve" sampling is implemented as two functions internally.
The first finds which curve each "global" sample should be on. Then
the second is the regular evaluation and sampling in that curve.
The first operations creates lengths, but they were processed as
factors when passed to the second function.
If no OPTIX_ROOT is set, nvcc fails to compile because there is a stray "-I"
in the arguments. Detect if the include path is empty and act accordingly.
Differential Revision: https://developer.blender.org/D16308
Effect strip start position was translated twice. This is caused by
recent refactoring, see 7afcfe111a.
Don't change `seq->start` of attached effect strips during translation
and only rely on `seq_time_update_effects_strip_range` function.
The node has always be a bit confusing for the NURBS case, since it
uses the distance between control points since the evaluated/control
point mapping isn't obvious, but it also went above 1, which wasn't
correct.
Instead, retrieve the total length from the point lengths calculated
in the previous step. The results should be the same for other curve
types.
The spacing and alignment of the properties in the geometry nodes
modifier could vary depending on the type of the socket or
whether the input can accept attributes.
Wrapping each property in its own `row` layout allows us to make
the spacing and alignment between them consistent.
Reviewed By: Hans Goudey
Differential Revision: http://developer.blender.org/D16417
The spacing and alignment of the properties in the geometry nodes
modifier could vary depending on the type of the socket or
whether the input can accept attributes.
Wrapping each property in its own `row` layout allows us to make
the spacing and alignment between them consistent.
Reviewed By: Hans Goudey
Differential Revision: http://developer.blender.org/D16417
Not quite sure why {rBd37d17019c52} forcefully set the Mesh to NULL if
in editmode, but this caused the attribute lookup to fail/crash.
Now only use the attribute if we have the mesh (reducing the scope where
it is used), bmesh editmode case does not rely on it.
Maniphest Tasks: T102318
Differential Revision: https://developer.blender.org/D16406
The auto-masking was working by Brush and this was very
inconvenient because it was necessary set the options by
Brush, now the options are global and can be set at once.
Also, the automa-masking now works with `and` logic
and not with `or` as before. That means that a stroke
must meet all the conditions of the masking.
Added new Layer and Material options to masking the
strokes using the same Layer/Material of the selected stroke.
Before, only Active Layer and Active Material could be masked.
The options of masking has been moved to the top-bar using
the same design of Mesh Sculpt masking.
As result of the changes above, the following props changed:
Removed:
`brush.gpencil_settings.use_automasking_strokes`
`brush.gpencil_settings.use_automasking_layer`
`brush.gpencil_settings.use_automasking_material`
Added:
`tool_settings.gpencil_sculpt.use_automasking_stroke`
`tool_settings.gpencil_sculpt.use_automasking_layer_stroke`
`tool_settings.gpencil_sculpt.use_automasking_material_stroke`
`tool_settings.gpencil_sculpt.use_automasking_layer_active`
`tool_settings.gpencil_sculpt.use_automasking_material_active`
Reviewed by: Julien Kaspar, Matias Mendiola, Daniel Martinez Lara
Previously, the code would incorrectly free the passed in custom data
layer even when `CD_ASSIGN` was not used. Now the function actually
supports assigning the data to the layer. This only fixes the case for
custom data layer types that only support a single layer like `CD_MEDGE`.
Informally reviewed by Hans Goudey.
Change the behaviour of circle select on FCurves:
- Before any key is touched, the behaviour is as it was (key included in
circle-select area → select it; otherwise → select entire curve)
- If any key has been touched, an internal option
(`use_curve_selection`) is flipped and selecting the entire curve is
disallowed.
This ensures that once a key changes selection state, it's no longer
possible to select the entire curve. This allows dragging over keys and
subsequently drag over a keyless part of the curve.
Reviewed By: RiggingDojo, troopy28
Maniphest Tasks: T101894
Differential Revision: https://developer.blender.org/D16307
This patch introduces a new `CacheMutex` which makes it easy to implement
lazily computed caches in e.g. `Curves`. For more details see `BLI_cache_mutex.hh`.
Differential Revision: https://developer.blender.org/D16419
When changing the texture paint slot index or activating a Texture Node, the texture displayed in the Image Editor changes accordingly.
This patch syncs the Image Editor when a new texture paint slot was added, which currently is not the case.
Also deduplicates some code.
Rotation and scale was done around the wrong center (always around mouse
position) in paint_draw_tex_overlay [on the other hand,
paint_draw_cursor_overlay already got the center right].
Now make the center dependent on UnifiedPaintSettings "draw_anchored".
Maniphest Tasks: T102312
Differential Revision: https://developer.blender.org/D16418
The distinction existed for legacy reasons, to easily port of Embree
intersection code without affecting the main vector types. However we are now
using SIMD for these types as well, so no good reason to keep the distinction.
Also more consistently pass these vector types by value in inline functions.
Previously it was partially changed for functions used by Metal to avoid having
to add address space qualifiers, simple to do it everywhere.
Also removes function declarations for vector math headers, serves no real
purpose.
Differential Revision: https://developer.blender.org/D16146
The color-band needs to do some special, rather awkward updating of the
UI state when certain values are changed. As @lichtwerk noted in the
report, this was done to the wrong buttons. Now lookup the proper
buttons, and don't assume that `uiItemR()` only adds a single button
(which often isn't the case).
The new Xcode 14.1 brings the new Apple Clang compiler which
considers sprintf unsafe and geenrates deprecation warnings
suggesting to sue snprintf instead. This only happens for C++
code by default, and C code can still use sprintf without any
warning.
This changes does the following:
- Whenever is trivial replace sprintf() with BLI_snprintf.
- For all other cases use the newly introduced BLI_sprintf
which is a wrapper around sprintf() but without warning.
There is a discouragement note in the BLI_sprintf comment to
suggest use of BLI_snprintf when the size is known.
Differential Revision: https://developer.blender.org/D16410
Avoid accessing freed memory from dynamically allocated EnumPropertyItem
arrays. Rely on the memory being held by the iterator which isn't the
case when it was converted to a tuple.
Function casts hid casting between potentially incompatible type
signatures (using int instead of Py_ssize_t). As it happens this seems
not to have caused any bugs on supported platforms so this change is
mainly for correctness and to avoid problems in the future.
Missed these changes in [0].
Also replace designated initializers in some C code, as it's not used
often and would need to be removed when converting to C++.
[0] e555ede626
Seems like the new audio channel api was not as backwards compatible as we thought.
Therefore we need to reintroduce the usage of the old api to make older ffmpeg version be able to compile Blender.
This change is only intended to stick around for two releases or so. After that we hope that most Linux distros ship
ffmpeg >=5.0 so we can switch to it.
Reviewed By: Sergey
Differential Revision: http://developer.blender.org/D16408
As instances are often generated geometries, we cannot rely on the data
provided by `DupliObject::ob`.
Use `DupliObject::ob_data` when possible.
This required a major refactor in the code as the output variables are
now gathered in context and easier to access.
Use struct identifiers in comments before the value.
This has some advantages:
- The struct identifiers didn't mix well with other code-comments,
where other comments were wrapped onto the next line.
- Minor changes could re-align all other comments in the struct.
- PyVarObject_HEAD_INIT & tp_name are no longer placed on the same line.
Remove overly verbose comments copied from PyTypeObject (Python v2.x),
these aren't especially helpful and get outdated.
Also corrected some outdated names:
- PyTypeObject.tp_print -> tp_vectorcall_offset
- PyTypeObject.tp_reserved -> tp_as_async
As instances are often generated geometries, we cannot rely on the data
provided by `DupliObject::ob`.
Use `DupliObject::ob_data` when possible.
This required a major refactor in the code as the output variables are
now gathered in context and easier to access.
This is not the case though, the modifier act explicitly on mesh edges,
if no tesselated mesh is provided, it would simpy early out and do
nothing.
Now always disable the "Apply on Spline" option with a tip that this
modifier can only smooth the tesselated curve (not the underlying curve
control points). Similar to rB1a6b51e17502.
Fixes T102060.
Maniphest Tasks: T102060
Differential Revision: https://developer.blender.org/D16386
The operator was acting on non selected items (wasnt checking SpaceFile
bookmarknr for being -1) which could end up removing items even.
Now sanatize this by introducing proper poll (which returns false if
nothing is selected).
Fixes T102014.
Maniphest Tasks: T102014
Differential Revision: https://developer.blender.org/D16385
Regression in [0] needs further investigation
(building docs may crash again).
This effectively reverts [0], however de-duplicating the color-space
enum can be kept.
[0]: 037b771e1a
This patch tunes maximum threads-per-threadgroup and threads-per-block for faster renders on Apple GPUs. Appropriate tuning is selected based on the GPU architecture (M1 or M2). We see a benchmark uplift of around 5-10% on M1 family chips. Similar uplift is expected on M2 with upcoming OS changes. (Ref T101931)
Reviewed By: brecht
Maniphest Tasks: T101931
Differential Revision: https://developer.blender.org/D16299
The operator was acting on non selected items (wasnt checking SpaceFile
bookmarknr for being -1) which could end up removing items even.
Now sanatize this by introducing proper poll (which returns false if
nothing is selected).
Fixes T102014.
Maniphest Tasks: T102014
Differential Revision: https://developer.blender.org/D16385
As described in the comment on `BLI_task_isolate`, deadlocks can happen
when isolation is used with threading primitives that separate spawning tasks
from executing them. All threads are waiting the tasks to complete but no
thread is able to continue working due to task isolation.
The fix is to not pass lazy-threading hints through task isolations. This way
isolated regions can't create new tasks in a scheduler further up the call stack.
This may lead to minor slowdowns because less threading may be used.
It's generally possible to get rid of the slowdown again by sending the
lazy-threading hint before entering the isolated region.
Use the node topology cache and avoid modifying the node tree
in a non-threadsafe way to improve the predictability of using
the helper function. Replaces the implementation from
e0d4047136.
Reorder the items in the `Locks` menu:
* Split into three groups: Lock, Unlock, Invert.
* Use icon only in the first item of each group, following the HIG.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D16383
The removed function call removes all attributes from mesh edges
and rebuilds the mesh edge topology. This isn't necessary because
meshes always have edges in the first place.
Exporting a 4 million face grid, this saved 1.5 seconds out of 4
seconds total for the whole export.
Tests files have to be updated, since the edge calculation could
potentially change the order of elements. This is also a fix, since
previously the exporter would delete all attributes on the evaluated
mesh edges.
Differential Revision: https://developer.blender.org/D16391
Color space conversion item-function missed checking the context was
NULL to return a static array. This caused freed memory access when
building docs.
Currently there are both "EDGERENDER" and "EDGEDRAW" flags, which are
almost always used together. Both are runtime data and not exposed to
RNA, used to skip drawing some edges after the subdivision surface
modifier. The render flag is a relic of the Blender internal renderer.
This commit removes the render flag and replaces its uses with the
draw flag.
This patch introduces the concept of a Cached Resource that can be
cached across compositor evaluations as well as used by multiple
operations in the same evaluation. Additionally, this patch implements a
new structure for the realtime compositor, the Static Cache Manager,
that manages all the cached resources and deletes them when they are no
longer needed.
This improves responsiveness while adjusting compositor node trees and
also conserves memory usage.
Differential Revision: https://developer.blender.org/D16357
Reviewed By: Clement Foucault
Many connected edge loops could result in two edge loops sharing
vertices. This is more of a workaround, the reason for two edge loops
sharing vertices could be prevented some other way.
Add this check since it's a straightforward solution,
furthered investigation noted as a TODO.
BlendType max incorrectly returns the minimum in BLI_color_mix.hh
This differential fixes it to return the maximum.
Maniphest Tasks: T102216
Ref D16364
This fixes T102218, where baked f-curves would display incorrectly when normalized.
This bug was a result of the code making no effort to determine the y-range of baked f-curves, so it fell back to a default that looked horrible.
I've added specific handling for finding the y-range of each f-curve (I extracted this functionality out to a new function, `fcurve_scene_coord_range_get`, for organization purposes). In addition, a minor optimization was made to eliminate redundant range-checks when in preview range mode.
{F13838304}
Reviewed By: sybren
Maniphest Tasks: T102218
Differential Revision: https://developer.blender.org/D16363
Normalize is no longer necessary as BLI_path_name_at_index skips
redundant path components such as "//" and "/./".
This has the advantage that the path length isn't limited to FILE_MAX.
This commit reduces the amount of white space generated and keeps parameter documentation of a single line.
This makes the resulting rst files easier to read in the case of debugging.
This was useful while looking into T97464
Regression in [0], however the primary purpose of that code was to
cycle away from the active object (behavior which was intentionally
removed, see: T96752).
This broke weight-paint + pose-selection (Ctrl-LMB)
when the GPU depth picking preference was disabled.
Causing selection to pick the mesh object instead of the pose bones.
This de-selected the armature, making the pose bones unselectable
instead of selecting the pose bone as intended.
Adding the old code back (restricting it to weight-paint mode)
fixes the bug but reintroduces fairly involved logic unnecessarily.
Instead, prioritize bone selecting when in weight-paint & pose mode
(previously this was only done in pose-mode).
[0]: b1908f2e0b
This moves the implementation from the View to the draw manager itself.
However, this is not its final place and should be moved to the shader
create info at some point in the future.
For now it is not possible because of possible interaction with the
old draw manager codebase.
The regression is caused by D13824 0f89bcdbeb.
This fix follows the code from Sybren (D7785) to make object-mode
drivers from shapekey value to work. This intuitively makes sense
since the D13824 made the edit mode evaluation and ownership follow
the object mode more closely.
Differential Revision: https://developer.blender.org/D16380
On Ubuntu 20.04 running X11, there was this message on every Blender startup:
Unable to find 'wl_proxy_marshal_flags' in 'libwayland-client.so.0'.
The reason is that we build against Wayland protocols 1.21, which in turns requires
Wayland on the distribution to be 1.21+, which is not the case on Ubuntu 20.04.
This simply silences the warning. An improvement would be to explain the user that
their Wayland version is too old when neither X11 or Wayland can be found. Though
that's not trivial and a situation with old Wayland and no XWayland seems unlikely
to happen in practice.
Differential Revision: https://developer.blender.org/D16266
The non-deprecated API dates back to 2017, so it should be safe
to simply migrate to it.
Fixes verbose error prints, making it easier to see actual issues.
Differential Revision: https://developer.blender.org/D16370
The new Xcode declares the `sprintf()` function deprecated and
suggests to sue `snprintf()` as a safer alternative.
This change actually moves away from any formatted printing and
uses inlined byte-to-hex-string conversion which is also safe
and is (unmesurably) faster.
Differential Revision: https://developer.blender.org/D16378
Seems to be introduced by 99e5024e97.
The crash is caused by the difference in the expected alignment
of the `uiPopupMenu` which is 16 bytes and the actual alignment
returned by the `MEM_mallocN()` which is 8 bytes due to the memory
head.
Now made it so that `MEM_new()` can be used for types with any
alignment.
Differential Revision: https://developer.blender.org/D16375
* BLENDER_VERSION_CYCLE set to beta
* Update pipeline_config.yaml to point to 3.2 branches and svn tags
* Update and uncomment BLENDER_VERSION in download.cmake
Add a macro that implements something similar to cmake_path's IS_PREFIX
which isn't supported in older versions of CMake.
This caused the build-bot to fail.
C++ doesn't support taking the temporary address of a temporary array,
use inline functions instead.
Also change array joining functions to return the length of the string
instead of returning the pointer (matching BLI_path_join).
Creating `__pycache__` directories in SVN's lib/ directory can cause
updating SVN to fail. Add the -B flag when TEST_PYTHON_EXE from LIBDIR
is used so so Python doesn't generate this cache.
In high poly meshes the reprojections after remesh can become slow.
This parallelizes reprojection of face sets, paint mask and vertex paint.
It also adds flags to disable dependency graph updates on
setting remesh options to remove UI lag.
Profiling of remeshing a 3.4M poly mesh (in sculpt mode):
Before: 19.6s
After: 8.7s
Differential Revision: https://developer.blender.org/D15638
Render stored a shallow copy of the scene view layers and views for thread
safety, without proper functions to free it. But with the CoW depsgraph this
scene is already a copy of the original and an additional copy is not needed.
Refactor to use the scene view layers and some other settings directly instead
of making a copy.
The goal is to improve clarity and readability, without
introducing big design changes.
Follows the recent obmat to object_to_world refactor: the
similar naming is used, and it is a run-time only rename,
meaning, there is no affect on .blend files.
This patch does not touch the redundant inversions. Those
can be removed in almost (if not all) cases, but it would
be the best to do it as a separate change.
Differential Revision: https://developer.blender.org/D16367
This patch moves the GLSL shaders and their infos to the compositor
module as decided by the EEVEE & Viewport module. This is a non
functional change.
Differential Revision: https://developer.blender.org/D16360
Reviewed By: Clement Foucault
Currently, the realtime compositor treat vector types as 3D vectors,
which is true for most operations. However, some operations deal with
vector types as 4D vectors that encode two 2D vectors or one 3D vector
with the last component ignored. So this patch expands vector types to
include a fourth component that is only sometimes used.
Since we already stored vectors in RGBA textures, the necessary changes
are straightforward and are mostly concerned with adjusting the Result
class.
Differential Revision: https://developer.blender.org/D16359
Reviewed By: Clement Foucault
**Problem**
Currently multiple input sockets are created when a new node group is
made from selected nodes. Some of these are linked from the same source.
It is not convenient to sort out and remove multiple input sockets that
represent the same input. These inputs usually have meaningless names
like 'value', 'x', etc.
**Solution**
Create common input sockets for each link starting from the same input.
Move links inside the new group's node tree and reroute it to connect
the common input socket to the original nodes. This is done by building
up a mapping between the incoming link sources to the input interfaces
created for them. The input interfaces are reused by the rest of the
links having the same source.
This patch also changes the way the input sockets get their names.
Output socket names of the group nodes usually are specific and are
given consciously. Use the output socket names from group nodes instead
of the inputs where the links point to.
Differential Revision: https://developer.blender.org/D15802
As described in T92474 and T91650, this patch adds two features to the
sample curve node. First is an index input, to allow choosing the curve
to sample for each point. Second is a custom field input, which is
evaluated on the control points of the curve and then sampled like the
other outputs. There is an "All Curves" option for the old behavior
which takes the length of all curves into account.
For invalid curve indices, the node outputs zeros (default values).
Invalid lengths and factors are clamped.
There have been various discussions about splitting the node up more,
but this is an intuitive combination of options and will work well
enough for current use cases. The node could still be generalized more
in the future.
Keep in mind that the source field is evaluated on curve control points,
not the evaluated points used for sampling. This is necessary so that
fields like "Index" work as expected.
Differential Revision: https://developer.blender.org/D16147
While relatively harmless, BLI_path_parent_dir wasn't returning failure
when passed in "./" which wouldn't succeed.
Instead of adding a ".." and normalizing, normalize the path and remove
the last directly. This is simpler than inspecting the resulting path
to see if normalize removed it or not.
Add additional tests which failed previously.
Tests for BLI_path_normalize, BLI_path_parent_dir & BLI_path_rel
were disabled on WIN32 because of complications with slash direction.
Enable these tests using character replacement to manipulate test data.
Regression in [0] on WIN32 caused joining paths {"//", "path"} to
result in "//\path".
This made the file selector show paths with a "\" prefix.
Add an exception for WIN32 where an initial path of forward slashes
is joined without a back-slash.
[0]: 8f7ab1bf46
The check for BLI_path_normalize having succeeded only checked for a
trailing "../" which isn't correct. This caused going up a directory
in the file selector to do nothing on directories ending with "..".
This also caused an empty path to expand into "../" because
BLI_path_extension_check didn't account for this case.
Resolve using BLI_path_name_at_index which extracts the last component
of the path without having to match the the surrounding slashes.
The logic to go up a directory (using "..") ran before stripping "/./"
from the path. This caused "/a/b/./../" to result in "/a/b/"
instead of "/a/". Now redundant characters are removed before before
checking for ".." in paths.
Include test to ensure this works as expected.
ASAN is more often broken than working depending on the MSVC version
you have. As it is causing too many support incidents of people that
unknowingly turned ASAN on by running `make developer` and running
into issues starting blender due to the broken ASAN support in MSVC.
This commit changes the default not enable it for MSVC in the
developer profile. Devs that still want to enable it can do so though
turning WITH_COMPILER_ASAN on in their CMakeCache.txt or by running
`make developer asan`
Previously it would use a hardcoded location where the AMD driver installs it,
but Linux distributions may use other locations. Now look for both cases.
Adds a listener to the node add menu so that it refreshes as assets get
loaded asynchronously.
Followup to cf98518055, also see 99e5024e97 and the previous commit.
Updated the code to use the UsdGeomPrimvarsAPI class to read
and write mesh primvars instead of the now deprecated primvars
accessors in UsdGeomImageable. This will be required to build
with USD 22.11 in the future, where the deprecated functions
have been removed.
This allows us to asynchronously load items into the menu, see
cf98518055. All menus spawned from Python using the `wm.call_menu`
operator will be affected by this. We could avoid that and only refresh
the menu we need to, but it's worth trying to get this to work as a
general menu feature.
This is a slightly risky change, so keeping an eye open for bugs.
This patch builds on the work from bdb5754147 to add node group
assets directly in the node editor add menu. Assets are added after
separators to distinguish them, but otherwise they look like any other
node. The catalog trees from all configured libraries are used to build
the menu hierarchy. Only catalogs with matching asset types are used
though.
There are a few limitations of this initial version. For now this only
supports geometry nodes. Support for other built-in node systems just
requires some refactoring of the corresponding add menu though. Lazy
loading will be added in a followup commit. For now there is a label
the first time the menu is opened.
Like the search menu integration, re-saving asset library files in 3.4
is required, if it hasn't been done already.
Implementation wise, there is a some ugly code here. A lot of that is
because the asset system isn't complete. The RNA API doesn't work well
yet, and the system isn't built to interact with multiple libraries at
once. It's also ugly because of the way we combine automatic menu
generation with builtin menus. As noted in a code comment, these two
systems could be merged completely so that the menus for builtin nodes
are also generated in the same way.
Differential Revision: https://developer.blender.org/D16135
UsdImagingCapsuleAdapter static functions GetMeshPoints() and
GetTopology() have been removed in USD 22.11. In anticipation
of this upcoming change, I've updated the test code to call
the corresponding virtual functions instead.
For one, paintcurves were not considered in curves sculpt mode at all
(so you couldnt draw them). This is now enabled.
And the second issue was that since curves sculpt mode uses the reguar
paint_stroke_modal() [which handles paintcurves], this was actually
excuted, freeing the PaintStroke from SculptCurvesBrushStrokeData (but
not the CurvesSculptStrokeOperation) and immediately return
OPERATOR_FINISHED from modal (resulting in a double MEM_delete of
SculptCurvesBrushStrokeData -- in both invoke and modal).
There might be better ways to handle the memory free, for now the double
freeing is prevented by setting the operator customdata to NULL (and
check for that later).
Maniphest Tasks: T101062
Differential Revision: https://developer.blender.org/D16099
Motivation is to disambiguate on the naming level what the matrix
actually means. It is very easy to understand the meaning backwards,
especially since in Python the name goes the opposite way (it is
called `world_matrix` in the Python API).
It is important to disambiguate the naming without making developers
to look into the comment in the header file (which is also not super
clear either). Additionally, more clear naming facilitates the unit
verification (or, in this case, space validation) when reading an
expression.
This patch calls the matrix `object_to_world` which makes it clear
from the local code what is it exactly going on. This is only done
on DNA level, and a lot of local variables still follow the old
naming.
A DNA rename is setup in a way that there is no change on the file
level, so there should be no regressions at all.
The possibility is to add `_matrix` or `_mat` suffix to the name
to make it explicit that it is a matrix. Although, not sure if it
really helps the readability, or is it something redundant.
Differential Revision: https://developer.blender.org/D16328
Support layouts such as AZERTY where the shift key is held for number
keys. Text entry remains unchanged but these keys now activate shortcuts
as expected.
This matches a fix in X11 for the same problem: T47228.
This isn't full multi-seat support, instead set the active seat using
pointer/tablet & keyboard enter handlers.
This means that seats beside the first aren't prevented from having
their events handled.
Fixes very rare cases where the UV Cylinder Project, UV Sphere Project
and UV From View might not set the translation correctly if the scale
is exactly 1.0.
Mainly fixed because this code might later be reused elsewhere.
Retrieve the surface UV coordinates with the attribute API instead of
the helper function. This allows more flexibility of data types (and
domains), which is helpful especially because geometry nodes
can't write 2D vectors yet.
Use the newly added node topology cache to find the node that contains
a socket rather than looping through all nodes every time. The change
improves performance of drawing a some large node trees by 2-3x.
This patch adds a placeholder for the vulkan backend.
When activated (`WITH_VULKAN_BACKEND=On` and `--gpu-backend vulkan`)
it might open a blender screen, but nothing should be visible as
none of the functions are implemented or otherwise crash on a nullptr.
This is expected as this is just a placeholder. The goal is to add shader compilation
+validation to this backend as one of the next steps so we can validate
changes to existing shaders on OpenGL, Metal and Vulkan at the same time.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D16338
Previously both slashes were considered when joining paths, meaning
slashes that were part of the path name could be stripped before joining
the path.
Prefer using the native path separator for low level path functions,
callers can always convert slashes into the expected direction if they
need. This also matches BLI_path_append behavior.
With a full SVN checkout of "../lib", updating all paths is slower
than running an update on the whole repository at once.
Also collect paths and run the update in separate passes, this avoids
some duplicate checks such as checking the svn command exists.
This was because `stroke_id` was not using `vertex_start`.
But since `vertex_start` is not 1 based like it used to be, we need to add
1 to it to avoid a fragment depth of `0.0` which would be equal to the
background and not render.
There were two problems:
* The stroke was deleted if the last point was selected. Now
the stroke is flipped because is faster.
* If the second point was selected, the first point was removed
because the internal api, removed one point strokes by
default. This was done becaus ethe tools that used this API
did not need one point strokes as result. Now this optional
and keep one point strokes.
This allows using drawcalls with non default vertex range.
These calls will be culled like any other instance by the GPU culling
pipeline. But they will not be batched together since the vertex range
is part of the group.
Regression in [0], accessing the path from the file selector relied on
BLI_join_dirfile adding a trailing "/" when the filename was empty.
[0]: 9f6a045e23
This can be used for example for VR video formats that use this projection
instead of perspective projection for cubemap faces.
Differential Revision: https://developer.blender.org/D13525
A copy of the clipboard was always being, changes would re-read it.
Now read the clipboard on request. This avoids having to keep a copy
of the clipboard in memory as well as the need to keep a thread
to running to read the clipboard for each data-offer.
To prevent a deadlock when pasting from Blender's own clipboard.
- Sending the clipboard (using write(..)) runs in a background thread.
- Reading the clipboard uses a thread that performs round-trips to the
Wayland server to prevent until the read is complete.
This is an update to [0] that resolves the deadlock.
[0]: c03838dbc8
When the Wayland pipe can't be opened, don't leave the mutex locked.
Also skip checking wl_data_device_manager when reading from the primary
clipboard.
There was a problem with the hash table that was
not created as expected.
Also fixed an unreported memory leak in Grab tool not
related to this crash but detected during debug.
There were two issues caused by deferred registration (added by [0]),
one crash on startup (T102075), another unreported issue with the GLX/EGL
context failing to initialize. Unfortunately I'm unable to reproduce the
errors but it seems likely deferring interface registration is not well
supported so this commit uses an alternative solution to some interfaces
depending on others for initialization.
Instead of relying on the order of registration, a separate "update"
callback has been added which is called after binding interfaces.
This has the advantage that it can be called when adding/removing
interfaces at run-time to avoid the dangling pointers being left in
locally allocated structures. In practice adding/removing interfaces
happens so rarely (only with "outputs" as far as I'm aware) that this
benefit is theoretical at the moment.
This should resolve T102075.
[0]: 9fe9705bc0
* External engines do not use the PBVH and need slower depsgraph updates.
* Final depsgraph tag after stroke finishes was missing for sculpt color
painting, caused missing updates for other viewports as well as any
modifiers or nodes on other objects using the colors.
Updates for cursor could cause the paint data to be continuously refreshed,
which is pretty cheap by itself, but not when it starts tagging the depsgraph.
The paint slot refresh code ideally should not be doing depsgraph tags at all,
but checking if there were changes at least avoids continuous updates.
Recent refactoring to use uint relied on indirect includes and precompiled
headers for uint to be defined. Explicitly include BLI_sys_types where this
type is used now.
Intel documentation for Ubuntu 22.04 does list all runtime components
needed by the driver and oneAPI Cycles device but end-users getting
drivers from (other) sources can easily end-up missing required
Level-Zero Loader and struggle root causing what's wrong in their
system. Calling this requirement out in the UI will hopefull help them.
oneAPI Level-Zero incl. Loader: https://github.com/oneapi-src/level-zero
Common package names: level-zero, level-zero-loader
This fixes a 15% performance regression silently introduced by
79ab76e156 that aligned the compact
float3 on 16 bytes for oneAPI.
Current change is minimalist, there are further cleanup opportunities
such as removing packed_float3 definition for oneAPI but for some
reason, it cuts the recovered speedup in half, so we're starting with
this small fix for now.
Reviewed by: brecht
Differential Revision: https://developer.blender.org/D16340
This patch fixes T101790 by adding a macOS version check for deciding whether to show the caustics settings in the UI (MNEE kernels don't compile on macOS < 13.0)
Reviewed By: brecht
Maniphest Tasks: T101790
Differential Revision: https://developer.blender.org/D16339
Followup to rBfb424db2b7bb. Found some more candidates.
UI colors should use PROP_COLOR_GAMMA to avoid being affected by scene
color management (clarification by @brecht).
Differential Revision: https://developer.blender.org/D16337
When pinning a Mesh, we cannot rely on the context object.
Instead, use the context mesh now.
For vertexgroups names [which are still on the object API wise], this
means name collisions cannot be checked when pinning a Mesh (so print
this as a warning in that case)
Maniphest Tasks: T102045
Differential Revision: https://developer.blender.org/D16333
A copy of the clipboard was always being, changes would re-read it.
Now read the clipboard on request. This avoids having to keep a copy
of the clipboard in memory as well as the need to keep a thread
to running to read the clipboard for each data-offer.
Keep the registry listener active at runtime, now plugging/unplugging
monitors at run-time is detected and the associated data stored by
Blender is added/removed as well.
Previously all interfaces were detected at startup, afterwards no
changes were supported.
Defer interface registration so all known interfaces can be called in
the order defined by the array of supported types.
Without this, the compositor defined the order of registration so it
wasn't possible to rely on registration functions to depend on other
interfaces.
This caused initialization for 'seats' to be moved out of the
register callback to ensure multiple interfaces were initialized.
This isn't good for readability or maintenance since it meant the
add/remove callbacks didn't act on matching data.
the windows builder has 2 different build folders for the debug and
release libs, hardcoding the path like this leads to an extra 1GB
of downloaded files. The windows builder supplies a single PACKAGE_DIR
for both but gets ignored.
This change promotes PACKAGE_DIR to be cached in CMakeCache so it can
be changed if needed.
Differential Revision: https://developer.blender.org/D16213
Reviewed by; brecht, dfelinto
Moving widows between monitors with different scale set could flicker
in a feedback loop because the bounds of the window resizing could
cause the bounds of the windows to overlap different monitors.
Now the window is resized immediately, instead of letting the change
to the windows surface scale resize the window.
This change the attribute binding scheme to something similar to the
curves objects. Attributes are now buffer textures sampled per points.
The actual geometry is now rendered using an index buffer that avoid too
many vertex shader invocation.
Drawcall is wrapped in a DRW function to reduce complexity of future
changes.
This led to the color actually looking different on the node body itself
vs. in the panel, also using the colorpicker gave unexpected results.
UI colors should use PROP_COLOR_GAMMA to avoid being affected by scene
color management (clarification by @brecht).
Maniphest Tasks: T99603
Differential Revision: https://developer.blender.org/D16334
As a consequence of this, subsequent box-selection of bones would not
show correctly in Animation Editors (not showing the channels there
because of the lack of an active object).
The bug was caused by rBba6d59a85a38.
Prior to said commit, code logic was relying on the check for `basact`
being NULL to determine if object selection changes need to happen.
After that commit, this was handled by a `handled` variable, but this
was not set correctly if `basact` is actually NULL after the initial
pick (aka deselection by picking).
Maniphest Tasks: T101933
Differential Revision: https://developer.blender.org/D16326
There looks to be an inconsistency between Gnome/KDE here,
match KDE and Gnome applications under X11 (even XWayland)
by making the button closest to the nib MMB, and the other button RMB.
The number of node groups was including the fake user count.
I was ignoring the Fake User, and how it affects the id->us count.
This problem was present since the initial commit: 84825e4ed2.
Avoid top level global pointers, remove the window_manager pointer
and move the clipboard mutex along side the clipboard data.
Also skip updating window DPI if the window doesn't use the output
that changed it's scale.
Using the 3DConnexion Universal Wireless Receiver on MS-Windows caused
a different ID to be reported. While I'm not sure of the cause of this,
adding the ID doesn't conflict with other devices and fixes the problem.
Share logic for adding/removing global objects and freeing them on exit.
Refactor object registration add/remove into an array of callbacks
to localize logic into generic functions for each kind of interface.
Also corrects own error where the primary clipboard manager wasn't
being destroyed on exit.
UI panel may suggest, that disabling "Proxy & timecode" would cause
timecodes not being used, but this was not the case. Now timecodes will
be used only if the checkbox is checked.
The bug has existed since crasy space was implemented.
rBbf8a26b7453d made the error even worse as the
`modifiers_disable_subsurf_temporary` function, which works like a
toggle, did not temporarily re-enable subsurf.
The main problem is that the derived mesh is modified but not marked as
dirty at the end.
Internal links are run-time/derived data. Therefore it is not necessary
to load them from .blend files where invalid internal links may be stored.
They will be regenerated after a node tree is loaded anyway.
This patch tunes the integrator state sizing for Metal (`num_concurrent_states` and `num_concurrent_busy_states`).
On all GPUs architecture, we adjust the busy:total states ratio to be 1:4 which gives better rendering performance than the previous 1:16 ratio (independent of total state count). This gives a small performance uplift (e.g. 2-3% on M1 Ultra).
Additionally for M2 architectures, we double the overall state size if there is available headroom. Inclusive of the first change, we can expect uplift of close to 10% in future, as this results in larger dispatch sizes and minimises work submission overheads. In order to make an accurate determination of available headroom, we defer the calculation of `num_concurrent_states` and `num_concurrent_busy_states` until the time of integrator state allocation (i.e. after all of the scene data has been allocated). We also refactor `alloc_integrator_soa` to calculate an *exact* single-state-size in a first pass, right before allocating the integrator SoA buffers in a second pass.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D16313
Mistake in own rBb6a35a8153c3 which caused code to always recurse into
bone hierarchies (no matter which collapsed level an armature was
found).
This led to bone counts always being displayed even outside a collapsed
armature (e.g. if an armature was somewhere down a object or collection,
the collapsed object or collection would show this bonecount).
This is inconsistent with other data counting in the Outliner, e.g.
vertexgroups or bonegroups do have their indicator at object level,
however the counter only shows if `Vertex Groups` or `Bone Groups` line
shows (so if the object is not collapsed).
And this also led to the bug reported in T101946 which was that the bone
counts would be treated as collections when further down a collapsed
hierarchy.
Background: The whole concept of `MergedIconRow` is based on the concept
of counting **objects types or collectinons/groups**. If other things
like overrides, vertexgroups or bonegroups are displayed in a counted/
merged manner, then these will always be counted in the array spots that
are usually reserved for groups/collections. But for things this is not
a problem (since these are only displayed below their respective
outliner entry -- and will never be reached otherwise).
So to correct all this, we now only recurse into a bone hierarchy if a
bone is at the "root-level" of a collapsed subtree (direct child of the
collapsed element to merge into).
NOTE: there are certainly other candidates for counted/merged display
further up the hierarchy (not just bones -- constraints come to my mind
here, but that is for another commit)
Maniphest Tasks: T101946
Differential Revision: https://developer.blender.org/D16319
Currently, if an image exceed the texture limit setup by the user or the
GPU backend, it will be scaled down to satisfy the limit. However,
scaling happens independently per axis, that means the aspect ratio of
the image will not be maintained.
This patch corrects the smaller size to maintain the aspect ratio.
Differential Revision: https://developer.blender.org/D16327
Reviews By: Clement Foucault
rBb70bbfadfece allowed scaling of zero-radius points, but as it behaves
differently from other radius, it may not be suitable for multi-point
transformation.
It was too easy accidentally break builds without WITH_GHOST_DEBUG
enabled because the arguments were ignored. Now they are expanded in an
`if (0) {...}` block, so invalid expressions result in errors.
This could result in wrong behavior depending on the order in which the
Image.filepath and Image.source fields are set from within Python for
example.
Caused by rB72ab6faf5d80
Disable libdecor Wayland requirement which would use an X11 fallback.
While the crash could be investigated, using libdecor at all makes
no sense in background mode.
Kind of intentional regression on rB2d1fe736fabd.
But the solution now is (theoretically) better than adding a hard coded
threshold.
For cases with zero radius, the new radius is now the offset of the
ratio projected onto the plane of the origin point.
For the JPG preview, the only thing that was changed in the image
format was the format itself. However, the colorspace code now also
checks the bitdepth through BKE_image_format_is_byte, so the depth
needs to be explicitly set to 8-bit for the JPG preview output.
Error introduced in rB1edebb794b76.
In that commit it was kind of forgotten that the snap to grid is also
used in 3D views.
Also a refactoring and cleanup was applied to simplify the code.
Code adding stash track was clearing out track flags, instead of editing
them as it should have...
Note that there are a lot of other weaknesses in action stash code (like
relying on the (translated!!!!!!) name of the track to know whether it's
a stah or not).
Add support for zoom & rotate gestures, hold and swipe may
be used in the future although swipe maps to 2D smooth-scroll for
Gnome & KDE.
Tested to work with Apple track-pad & Wacom tablet on Gnome & KDE.
Previously, the Blender video renderer did not have support for
encoding video to AV1 (not to be confused with the container AVI).
The proposed solution is to leverage the existing FFMpeg renderer
to encode to AV1.
Note that avcodec_find_encoder(AV_CODEC_ID_AV1) usually returns
"libaom-av1" which is the "reference implementation" for AV1 encoding
(the default for FFMpeg, and is slow). "libsvtav1" is faster and
preferred so there is extra handling when fetching the AV1 codec for
encoding such that "libsvtav1" is used when possible.
This commit should only affect the options available for video
rendering, which includes the additional AV1 codec to choose from, and
setting "-crf".
Also note that the current release of FFMpeg for ArchLinux does not
support "-crf" for "libsvtav1", but the equivalent option "-qp" is
supported and used as a fallback when "libsvtav1" is used (as
mentioned here: https://trac.ffmpeg.org/wiki/Encode/AV1#SVT-AV1 ).
(Actually, both "-crf" and "-qp" is specified with the same value in
the code. When a release of FFMpeg obtains support for "-crf" for
"libsvtav1" is released, the code shouldn't be needed to change.)
The usage of the AV1 codec should be very similar to the usage of the
H264 codec, but is limited to the "mp4" and "mkv" containers.
This patch pertains to the "VFX & Video" module, as its main purpose
is to supplement the Video Sequencer tool with the additional AV1
codec for encoded video output.
Differential Revision: https://developer.blender.org/D14920
Reviewed By: sergey , ISS, zeddb
When the image colorspace is not data, linear or sRGB, the image will
be converted to float (and colorspace-converted) during loading.
However, if it also needs to be rescaled (due to exceeding the GPU
texture size limit), the resizing assumed that it's still a byte
texture.
The check was already there, but given it was not
exposed as an option it didn't show up in my cmakecache
and i got tired of having to lookup the exact name
all the time.
This is to help ensure buildbot builds are correct, while still gracefully
disabling features in user/developer builds.
* Add WITH_STRICT_BUILD_OPTIONS to give an error when features can't be
enabled due to missing libraries or other reasons. Add new macro
set_and_warn_library_found used everywhere features were being
automatically disabled.
* Remove code from Windows and macOS for various libraries that would
automatically disable features. set_and_warn_library_found could be
used here also, but we are generally assuming the precompiled libraries
are complete and only test for availability when libraries are just
added.
Differential Revision: https://developer.blender.org/D16104
It has not actually been enabled there for a long time in official releases,
so this just fixes the warning. Making it work again would be good, but for
now JACK is only supported on Linux.
The issue we ran into a lot is we have a python script that updates
git+SVN. Which works fine most of the time, except when we have a
python update in SVN, or worse a python version change. Python really
doesn't enjoy having its files being deleted or changed while it is
running and users generally end up with a corrupted lib folder.
This change updates the library folder using svn.exe first before
letting the python script run sidestepping the issue in most cases.
The python script will still run and do the more elaborate work
like updating git and switching SVN branches which could still
run into issues cause python still doesn't like being changed
while running but there's not a whole lot we can about that,
for *most* people however things will just work now.
Buildbot infrastructure relies on the fact that it can enable and
disable `WITH_CYCLES_<COMPUTE>_BINARIES` without affecting speed of
incremental builds. This allows buildbot to skip GPU kernels when
doing CI regression tests which do not need GPU kernels, as well as
it allows to move GPU kernels compilation to a separate step where
all the resources are available to the GPU kernel builders.
For the oneAPI compute enabling and disabling AoT kernels has much
higher implications due to the kernels being a part of the device
implementation from the build target perspective.
This change makes it so different target names are used for JIT and
AoT configurations, which allows CMake to more fully benefit from
"caching" the compiled result.
The end goal of this change is to make it so sequential build of the
same code base on the buildbot happens super fast,
Blender binary still needs to be re-linked when the AOT of oneAPI
option is toggled, but that's already the case in the buildbot due
to the WITH_BUILDINFO.
Differential Revision: https://developer.blender.org/D16312
sycl::info::device::ext_intel_* descriptors are deprecated,
replaced with sycl::ext::intel::info::device:: that are available from
6.0+, for which we now check version in CMake.
For debugging it is useful to known the active GPU backend. Although
it could be determined from looking at the extensions, this is easier
to understand when not activly working in this area.
The opencollada dependency will be using an external xml2 library
for 3.4. This change allows to build against both old and new
style lib folders.
As it is a C library it did not need a special debug version.
In rBed6c8d82b804 it was wrongly assumed that the constraint functions
always apply the transformations.
But that is not the case for when axes are aligned.
The `mul_m3_v3(t->con.pmtx, out)` fallback is still required.
The bokeh blur node flipped its bokeh input due to the conceptual
difference between the search window space and the weights texture
space. This patches fixes that by inverting the weights texture to match
the search window.
The variable size option actually flips the bokeh input for the CPU
compositor. It is unclear if this is expected, so we deviate from that
behavior for now.
When changing a scene's unit scale from 1 to something else, 0.1 for
e.g. walk navigation no longer worked properly. Whenever gravity is
enabled, and the user starts to fall or jump, the view-port glitched out
into low earth orbit.
Reviewed By: campbellbarton
Ref D16277
- build and use our version of libxml
- the cli tools had a linker error due
to it trying to link a shared version
of libxml, disabled both and zlib 1.2.3
with a patch since we do not want/need
them for blender.
- postfix the libraries with _d for debug
automatically so we don't have to fix that
during the harvest.
due to this only being windows changes no
rebuild needed for the other platforms.
- Clarify how data_offer is used for both the clipboard & drag-and-drop.
- Acquire the clipboards mutex lock before freeing.
- Log a warning when creating a pipe fails.
- Add doxy-sections.
The `ED_object_get_active_image` is used from the renderer which deals with
evaluated objects. This means the material api for evaluated objects has
to be used.
Adds the possibility of having a little number on top of icons.
At the moment this is used for:
* Outliner
* Node Editor bread-crumb
* Node Group node header
For the outliner there is almost no functional change. It is mostly a refactor
to handle the indicators as part of the icon shader instead of the outliner
draw code. (note that this was already recently changed in a5d3b648e3).
The difference is that now we use rounded border rectangle instead of
circles, and we can go up to 999 elements.
So for the outliner this shows the number of collapsed elements of a
certain type (e.g., mesh objects inside a collapsed collection).
For the node editors is being used to show the use count for the data-block.
This is important for the node editor, so users know whether the node-group
they are editing (or are about to edit) is used elsewhere. This is
particularly important when the Node Options are hidden, which is the
default for node groups appended from the asset libraries.
---
Note: This can be easily enabled for ID templates which can then be part
of T84669. It just need to call UI_but_icon_indicator_number_set in the
function template_add_button_search_menu.
---
Special thanks Clément Foucault for the help figuring out the shader,
Julian Eisel for the help navigating the UI code, and Pablo Vazquez for
the collaboration in this design solution.
For images showing the result check the Differential Revision.
Differential Revision: https://developer.blender.org/D16284
This patch implements the normalize node for the realtime compositor.
Differential Revision: https://developer.blender.org/D16279
Reviewed By: Clement Foucault
During object duplication the syncing is temporarily disabled.
With {D15885} this isn't useful as when disabled the view_layer
is still accessed to locate bases. This can be improved by first
locating the source bases, then duplicate and sync and locate
the new bases.
This patch removes the resync forbid and improve the times
that resyncing actually must happen.
Reviewed By: mont29
Maniphest Tasks: T73411
Differential Revision: https://developer.blender.org/D15886
This patch implements the tone map node for the realtime compositor
based on the two papers:
Reinhard, Erik, et al. "Photographic tone reproduction for digital
images." Proceedings of the 29th annual conference on Computer graphics
and interactive techniques. 2002.
Reinhard, Erik, and Kate Devlin. "Dynamic range reduction inspired by
photoreceptor physiology." IEEE transactions on visualization and
computer graphics 11.1 (2005): 13-24.
The original implementation should be revisited later due to apparent
incompatibilities with the reference papers, which makes the operation
less useful.
Differential Revision: https://developer.blender.org/D16306
Reviewed By: Clement Foucault
After the last library update cve_check still reported some false positives.
One GMP issues was mitigated with a patch in the library update. The others
are ignored, with a description explaining why they do not affect Blender.
Ref D16269, T101403
THis is bumping dependencies to fix known CVEs, with the exception of
OpenImageIO which also includes bugfixes for performance and correctness
with some image types.
zlib 1.2.12 -> 1.2.13
freetype 2.11.1 -> 2.12.1
openimageio 2.3.13.0 -> 2.3.20.0
python 3.10.2 -> 3.10.8
openjpeg 2.4.0 -> 2.5.0
ffmpeg 5.0 -> 5.1.2
sndfile 1.0.28 -> 1.1.0
xml2 2.9.10 -> 2.10.3
expat 2.4.4 -> 2.4.9
openssl 1.1.1g/i -> 1.1.1q
sqlite 3.31.1 -> 3.37.2
Notable changes:
* AOM: the hack we had in place to make it not detect pthreads on windows no
longer worked with a more recent cmake version. Disabled pthreads with a
diff on Windows.
* Python: embedded copy of zlib 2.1.12 swapped out for our 2.1.13 copy with
some folder manipulation on Windows.
* Freetype: was harbouring a copy of zlib 2.1.12 as well, so that had to end.
* FFmpeg: patch used to fix D11796 is no longer needed. Add new patch to deal
with simple_idct.asm generating an object file with no sections in it,
backport from upstream commit.
* TinyXML: still being downloaded but no longer used by OpenColorIO, removed.
* GMP applied upstream patch to fix CVE-2021-43618, as there is no release yet.
* SQLite and Libsndfile patches no longer needed.
Includes contributes by Ray Molenkamp, Campbell Barton and Brecht Van Lommel.
Ref T101403
Differential Revision: https://developer.blender.org/D16269
Previously this was using `GPU_SHADER_TEXT` as default value indicating
an "unset" state. This wasn't documented in the definition (and so
D16284 added a new enumerator that broke this). Plus code was assuming
this enumerator would always have the value 0 without specifying this in
the definition either.
In this case it's easy to not rely on the enum value at all, and just
use `std::optional` to add a "unset" state.
Differential Revision: https://developer.blender.org/D16303
- Improve reporting when reading a file descriptor into a buffer fails,
also check for failure to allocate memory.
- Store buffers with size in a simple struct.
- Use shared utility functions for simple buffer operations.
Reduce amounts of viewlayer updates during remapping while relocating
libraries. Gives some improvements on relocating process, depending on
complexity of existing scene and reloaded libraries, whether there is
liboverrides to resync, etc., can give up to 10% speedup.
Liboverrides that were using a missing linked reference ID would not get
their 'MISSING' tag properly cleared afer relocating, in case their
linked reference is no more missing.
Reported by Andy (@eyecandy) from Blender studio.
Use store-current-and-restore-previous OpenGL program in the OpenGL
Shader Interface. This is a better fix for the initial error, which
additionally solves interface artifacts when opening non-default
startyp files on macOS with AMD GPU.
Use the official spelling of the WebM codec. Only affects the interface
string and not the identifier used in the Python API. Should not even
affect translations: the current msgstr's do no translate the original
string.
Reported by Anton Raves, thanks!
In T93382, the problem was that the Blender-side rendering code was
still generating the subsurface passes because the old render pass
flags were set, even though Cycles doesn't generate them anymore.
After a closer look, it turns out that the entire hardcoded pass
creation code can be removed. We already have an Engine API function
to query the list of render passes from the engine, so we might as
well just call that and create the returned passes.
Turns out that Eevee already did this anyways. On the Cycles side, it
allows to deduplicate a lot of `BlenderSync::sync_render_passes`.
Before, passes were defined in engine.py and in sync.cpp. Now, all
passes that engine.py returns are created automatically, so sync.cpp
only needs to handle a few special cases.
I'm not really concerned about affecting external renderer addons,
since they already needed to handle the old "builtin passes" in
their Engine API implementation anyways to make them show up in the
compositor. So, unless they missed that for like 10 releases, they
should not notice any difference.
Differential Revision: https://developer.blender.org/D16295
Part of a wider set of changes to migrate UV packing from
uv_parametrizer.cc to uvedit_islands.cc.
This allows UV packing improvements including margin calculation,
correctness fixes such as support for non-manifold geometry,
and new packing algorithms including speed and quality improvements.
See for example c2256bf7f7, T82637
This change migrates UV.unwrap and Live UV Unwrap.
Differential Revision: https://developer.blender.org/D16296
The external cancel callback destroyed the data source but didn't
clear the pointer. While this didn't cause problems,
avoid keeping references freed pointers.
Remove NURBS or Bezier specific attributes after removing points or
curves. In theory we could avoid copying those attributes in the
first place, but that doesn't seem worth the extra complexity here,
since we don't necessarily know the result curve type counts before
copying attributes.
`V2D_VIEWSYNC_AREA_VERTICAL` flag was mistakenly set to the sequencer
toolbar region instead of the channels region.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D16155
The instance attributes assignment operators were broken in multiple
ways: there wasn't a move constructor (probably causing performance
issues), and the destination attributes weren't freed before they
were replaced.
Attribute copying often uses identical logic for copying selected
elements or copying with an index map. Instead of reimplementing
this in each file, use the common implementation in the array_utils
namespace. This makes the commonality more obvious, gives improved
performance (this implementation is multithreaded), reduces binary
size (I observed a 173KB reduction), and probably reduces compile time.
Known Issues:
- Command buffer failures when using binary archives (binary archives is disabled for Intel GPUs as a workaround)
- Wrong texture sampler being applied (to be addressed in the future)
Ref T92212
Reviewed By: brecht
Maniphest Tasks: T92212
Differential Revision: https://developer.blender.org/D16253
Mistake in own rB358155a8da60, change ended up discarding the case where
we need to also delete IDs using a tagged-to-be-deleted ID in a 'never
NULL' way. Typical example: Whene deleting a Mesh ID, one also needs to
delete all the Objects using that mesh, since obdata pointer is of type
'never NULL'.
Note that luckily, this fix does not affect the performance improvements
from rB358155a8da60.
Noted by Brecht and Clement because of failing unittests, shame on me.
Previously, a first build using ninja would throw "ninja: error:
'intern/cycles/kernel/cycles_kernel_oneapi.lib', needed by
'bin/blender.exe', missing and no known rule to make it".
"dg2" target is deprecated from the GPU compiler/ocloc.
We switch to targeting acm-g10 instead, for which generated binaries are
compatible with other Arc GPUs.
MSVC Tools version doesn't match MSVC Redist version on some systems and
it's not populated when using Ninja outside of Visual Studio shell,
trying another way.
Oversight in rBf8b1483566cc which resulted in fonts/surfaces not having
their draw caches being tagged dirty.
Not only OB_CURVES_LEGACY have their object data of type ID_CU_LEGACY,
but also OB_SURF/OB_FONT objects.
Maniphest Tasks: T101922
Differential Revision: https://developer.blender.org/D16298
Add command line argument to switch gpu backend. Add `--gpu-backend` option to
override the gpu backend selected by Blender.
Values for this option that will be available in releases for now are:
* opengl: Force blender to select OpenGL backend.
During development and depending on compile options additional values can exist:
* metal: Force Blender to select Metal backend.
When this option isn't provided the internal logic for GPU backend selection will be used.
Note that this is at the time of writing the same as always selecting the opengl backend.
Reviewed By: fclem, brecht, MichaelPW
Differential Revision: https://developer.blender.org/D16297
During teleport event, gravity is disabled and WalkMethod
is stored in `teleport.navigation_mode` which is used later to reset
the status after execution. Calling teleport events consecutively
will change the initial WalkMethod value. So update it only on the
first call. Also remove `else condition` as it stops the previously running
teleport when the new teleport call fails to find a hit point.
Reviewed by: dfelinto, mano-wii
Differential Revision: https://developer.blender.org/D15574
The interface needs to bind the shaders for some parameter setup.
This program change wasn't reflected in the GPUContext.
This was then conflicting with the next shader bind if the next shader was
the same as the shader bound before the interface creation.
Setting the state to the correct shader ensures a rebind if needed.
Fix T101792 New hair curves do not render properly first time in EEVEE with motion blur enabled
Smooth & discrete scrolling may both be set, instead of always
prioritizing discrete, use discrete scrolling when the source is a
mouse wheel, otherwise prioritize smooth scrolling.
Add the eModifierMode_Editmode to the required modes for curves modifier
evaluation. Only this way the modifier can be skipped in evaluation.
Maniphest Tasks: T101888
Differential Revision: https://developer.blender.org/D16280
The users had to type in a name here, but we can also make it a dropdown
choice with existing UV Maps for convenience:
- dont have to remember a name or copy paste obviously
- shows in red if it was removed / invalid
Came up in T101028
Maniphest Tasks: T101028
Differential Revision: https://developer.blender.org/D15956
Batch-delete by-passes a lot of ID usages handling in to-be-deleted IDs,
so usercount of deleted IDs needs to be manually reset to avoid the
annoying error messages in the console.
Simplify and optimize remapping handling in bacth ID deletion, by moving
it outside of the initial loop gathering all IDs to be deleted, and and
by using batch remapping code.
Speedup can be over 100 times faster in complex production scenes using
thousands of IDs, when e.g. deleting a whole library.
Examples before/after times on my machine (deleting two different libraries):
lib1: 5.55 sec/0.03 sec
lib2: 13.60 sec/0.13 sec
Found while investigating T101903.
Remapping in batch deletion could end up calling viewlayer resync code
on partially invalid BMain (some IDs still in Main using IDs removed
from Main).
Think this code can actually be further optimized, but this fix should
be safe enough for 3.3 (and potentially 2.93).
Thanks to Jeroen (@jbakker) for the initial investigation.
For consistency with other brush based (paint) systems we should add
these entries in the brushes context menu.
For this, expose the brushes `ob_mode` to RNA and show this (along with
the tool choice) to the appropriate menus.
Differential Revision: https://developer.blender.org/D16287
Currently harmless (since atm. it is not possible to trigger this part
of the code from curves sculpting), but in a future fix (for T101518), it
would be good to use `BKE_paint_init` (and having the correct ob_mode
for the brush would be nice).
Differential Revision: https://developer.blender.org/D16286
This was added in rB4c9fe657458f, however that new code never used this
menu (but the existing `VIEW3D_MT_brush_paint_modes` instead).
Differential Revision: https://developer.blender.org/D16285
These events are interpreted as MOUSEPAN by Blender.
Tested with a Wacom Intuos5. This isn't full touch support
which is needed to support gestures such as Swipe, Rotate .. etc.
Skip BMesh conversion and read the selection attribute directly.
With a Ryzen 3700x, my test face of a simple 4 million face grid
became over 4000 times faster, from 2.6s to 0.6ms.
Caused by 21f2bacad9 which misunderstood the logic handling
shape keys in this function. The shape key on the original mesh in the
main data-base should be cleared if the "no-main" mesh doesn't have any
shape key layers and the vertex count has changed. The complexity is
necessary because shape keys are stored differently on original and
evaluated meshes.
Also change to "Warn" because this is expected behavior in some cases,
like when applying a geometry nodes modifier that creates a new mesh
from scratch.
String attributes are intentionally not fully supported in geometry nodes
yet because more design work is necessary to decide how they should behave.
For now just disable handling string attributes to avoid crashes.
`Brush` has two attributes for holding texture information (`MTex`).
One for color textures (`mtex`) and one for mask textures (`mask_mtex`).
Unfortunately sculpt mode due to reasons used `mtex` to store mask textures.
Changes like brush asset/paint mode require modes/tools to read the mask/color texture from
one place.
To start sanatizing this we isolate the attributes in functions.
`BKE_brush_color_texture_get` and `BKE_brush_mask_texture_get`. All object
paint modes should use these functions.
When the File (or Asset) Browser would display data-blocks without
previews in a heavy .blend file, there would be a drastic slowdown.
See patch for details and comparison videos.
Differential Revision: https://developer.blender.org/D16273
Reviewed by: Bastien Montagne
MTLBatch and MTLDrawList implementation enables use of Metal Viewport for UI and Workbench. Includes Vertex descriptor caching and SSBO Vertex Fetch mode draw call submission.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D16101
Previously this was only available as a build options, making it
difficult to get user feedback when NDOF events didn't work as expected.
Now logging can be enabled with:
blender --log "ghost.ndof.*" --log-level 2 --log-show-basename
Part of a wider set of changes to Grid and Pixel snapping in the
UV Editor.
This change fixes snapping behavior for non-uniform grids, either
manually specified Fixed grids, or pixel grids where the underlying
image is non-square.
See a24fc6bbc1 for visual changes.
Maniphest Tasks: T78391
Differential Revision: https://developer.blender.org/D16275
There might be more or fewer curves in the input to the deform curves on
surface node than the original, so the curve's surface UV coordinates
need to be retrieved from the original curves.
A vertex might be connected to no edges or no faces. Most of these nodes
worked fine in that case, but we might as well make that explicit
and skip the sorting anyway.
As discussed in T101623, since face sets have become optionally stored,
(see b5f7af31d6) the default cube shouldn't have face sets--
they should be created explicitly by the user instead. This may improve
performance when modifying the default cube mesh.
DDS files coming through OIIO needed a similar treatment as TGA in
T99565; just for DDS OIIO just never set the "unassociated alpha"
attribute. Fixes T101850.
Reviewed By: Brecht Van Lommel
Differential Revision: https://developer.blender.org/D16270
The node only created a material index attribute on the result mesh
if it existed on any of the input meshes. But the input meshes might
not have the attribute if they had a single material or no materials.
As a fix, also create the attribute if the result has more than one
material.
color uniform assignment needing to be changed to ucolor was missed.
Ref T101445
Reviewed By: fclem
Maniphest Tasks: T101445
Differential Revision: https://developer.blender.org/D16236
Disable kerning in our main font to exactly restore the spacing of text
as seen in Blender 3.1 - 3.3
See D16186 for more details.
Differential Revision: https://developer.blender.org/D16186
Reviewed by Brecht Van Lommel
Checking for polygon and loop data to be referenced is too fragile
re changes in geometry node implementations. Instead, compare counts
of polygons, face corners and vertices: topology changes are unlikely
to keep all three unchanged.
Ref D15501
Also remove automasking_cavity_factor default from RNA for brushes.
Data-blocks set their defaults via `DNA_brush_defaults.h`
Continuation from previous commit and rBdb40b6
Thanks to Dalai for the help!
Recent changes to path handling (most likely [0]) caused
AssetCatalogTest.create_catalog_after_loading_file to fail on WIN32.
The test relied on the resulting path to be joined with "/" as a path
separator. The resulting path used both forward and back-slashes.
While these do work for some API's on WIN32, mixing both in a file path
isn't expected behavior in most cases, so update the tests to use native
slash direction for file-paths.
[0]: 9f6a045e23
This makes instance handling more consistent with all the other geometry
component types. For example, `MeshComponent` contains a `Mesh *` and
now `InstancesComponent` has a `Instances *`.
Differential Revision: https://developer.blender.org/D16137
Add auto-masking as a popover in the header while in Sculpt mode,
following the design in T101593.
These properties were present in the Options panel (and popover),
they have been removed from there.
Moreover, this commit makes the auto-masking section in Brush settings
match the new popover.
In the future this popover can be used for other modes that support
auto-masking such as Grease Pencil.
See D16145 for details and screenshots.
Reviewed By: JulienKaspar
Differential Revision: https://developer.blender.org/D16145
- Use `_` suffix for private members.
- Use `wl_` prefix for Wayland native types to help distinguish
them from local types.
- Replace single character names `d` & `w` with `display` `window`.
- Rename `selection` to `clipboard`. Using the primary selection as a
clipboard is a separate and as yet unsupported feature.
These functions are almost identical, the main difference being
BLI_join_dirfile didn't trim existing slashes when joining paths
however this isn't an important difference that warrants a separate
function.
Using varargs had the disadvantages, replace with a macro which has
some advantages.
- Arguments are type checked.
- Less verbose.
- Unintended NULL arguments would silently terminate joining paths.
- Passing in a NULL argument warns with GCC.
BKE_sculpt_mask_layers_ensure now takes a depsgraph argument and
will evaluate the depsgraph if a multires mask layer is added.
This is necassary to update the multires runtime data so that
pbvh knows it has a grids mask layer.
Also added code to update pbvh->gridkey.
When a scene copy is called, all viewlayers are ensured before they are
copied. In case of multiple viewlayers, a viewlayer can be out of sync.
This triggers an assert in the BKE_view_layer_copy_data.
Reviewed By: mont29
Maniphest Tasks: T101394
Differential Revision: https://developer.blender.org/D16214
This was a floating point precision issue - or, to be more precise,
an issue with how Cycles split floats into the integer and fractional
parts for Perlin noise.
For coordinates below -2^24, the integer could be wrong, leading to
the fractional part being outside of 0-1 range, which breaks all sorts
of other things. 2^24 sounds like a lot, but due to how the detail
octaves work, it's not that hard to reach when combined with a large
scale.
Since this code is originally based on OSL, I checked if they changed
it in the meantime, and sure enough, there's a fix for it:
https://github.com/OpenImageIO/oiio/commit/5c9dc68391e9
So, this basically just ports over that change to Cycles.
The original code mentions being faster, but as pointed out in the
linked commit, the performance impact is actually irrelevant.
I also checked in a simple scene with eight Noise textures at
detail 15 (with >90% of render time being spent on the noise), and
the render time went from 13.06sec to 13.05sec. So, yeah, no issue.
Problem here was that layer_collection_objects_sync wasn't called when
the holdout property is updated due to frame change, so the changed
visibility flag was never applied to ob->base_flag.
Turns out there's no real reason to handle the per-object holdout
property through the layer system. So, instead of merging both the
layer holdout and object holdout into base_flag and checking that
from the render engines, only handle the layer holdout (which can't
be animated, so no issue here) through base_flag and explicitly also
check the object holdout in the render engines.
PBVH_FACES and PBVH_GRIDS do not store faces directly in nodes;
instead they store 'primitives', which are tesselation triangles
for PBVH_FACES and grids (which are per-loop) for PBVH_GRIDS.
Primitives from the same face could sometimes end up in different
PBVH nodes. This is now prevented in two ways:
* All primitives of the same face are given the same boundary
during PBVH build. This prevents them from being swapped
away from each other during partitioning.
* build_sub adjusts the final partition midpoint to fall
between primitives of different faces.
Turns out PBVH drawing and normal mesh batches are not mutually
exclusive inside the draw cache; there are edge cases with modifiers
and instancing where you need both, and forcing one or the other
inside this function leads to memory corruption.
There were quite a few issues here:
* Bad usage of nagic number leading to confusing code
* Forgetting to take into accoun final `NULL` char
* RNA code thinkin `bl_idname` is python version, when it is actually
BL/C version.
Resolve by setting no_muted_links() on Factor sockets.
Same issue as T101613
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D16153
Test kernel will now test functionalities related to kernel execution
with USM memory allocations instead of with SYCL buffers and accessors
as these aren't currently used in the backend.
- Include libxkbcommon headers: needed for building Blender with Wayland.
- Remove Wayland libraries (now wayland is built locally).
- Split up packages into two lists, one for building libs,
another for building Blender - since it's useful to be able to build
Blender, testing the libs work as expected.
This removes the dependency on wayland-devel, with some potential
for errors caused from using two different versions.
Note that the generated files are currently unchanged.
Make the logic for converting NDOF Z-motion to a scale value more
straightforward. Flipping the Z axis was scaling by negative-time,
now the entire pan vector is scaled by time and the zoom value is
calculated as `scale = 1 - (z * time)` instead of `1 + (z * -time)`.
Although they're equivalent, confusion here caused T100953.
Also clamp the scale (while unlikely, negative scale wasn't prevented).
This operator (Alt + D) allows users to explicitly create a linked copy
of a group node (same current behaviour for the Duplicate operator).
The duplicate operator (Shift + D) now takes the new User Preference
duplicate data option for Node Tree into account. It is by default
disabled, leading to no functional change for users.
Although we could make in the future make this option "on" by default,
to make it consistent with the rest of Blender we do not at the time.
Differential Revision: https://developer.blender.org/D16210
From T101799:
Currently, the count indicator background and color are hardcoded to
black and white in an attempt to maximize contrast, at the expense of
being too prominent even when not needed.
Changing the background color to match the row (or any other element)
background, would make it look like the data-block icon is masked
out, improving readability while not standing out too much.
The circle background color should not have transparency, as it does
now. And the text inside should match the color of the text used for the
parent element (instead of hardcoded white). This should make it look
good in any theme.
---
Before:
{F13674265, size=full}
After:
{F13674269, size=full}
Differential Revision: https://developer.blender.org/D16246
In some situations, layers were filled with their default value
when converting from Mesh to BMesh (entering edit mode, for example).
This was caused by the recently added "copy mesh to bmesh" or "merge
mesh to bmesh" custom data functions creating a difference custom
data format than was used for the copying functions used later.
`CustomData_to_bmesh_block` is not robust enough to handle simple
differences in layout between the layout of the source and result
CustomData layers, because it relies on the order of the types and
the number of layers within each type.
As a fix, make the "mesh to bmesh" special case more explicit in
the conversion functions. This makes the difference in the API
smaller, which is a nice improvement anwyay.
Fixes T101796
Currently, the scale node always changes the interpolation of its result
to bilinear. This was done because the scale node does not have an
interpolation option, unlike the Transform node, so a default of
bilinear was assumed. This turned out to be problematic, because in the
pixelation use cases, a nearest interpolation is typically preferred by
the user.
This patch changes the default interpolation of input nodes to bilinear,
makes the scale node keep the interpolation of the input it receives,
and makes the pixelate node changes the interpolation to nearest. In
effect, for non-pixelation use cases, the default bilinear interpolation
will be used, and for pixelation use cases, the nearest interpolation
will be used unless explicitly specified using a node that sets the
interpolation.
Need to initialize the mask drawing overlays when the new space
is created. Otherwise the new space is configured in a way that
the splines are not visible and overlay opacity is 0.
This change fixes the new masking files created. The currently
saved ones need a manual tweak.
The error message when trying to apply a constructive modifier on a curve
object was wrong, "transform" makes no sense in this context.
Thanks Philipp for pointing it out!
This change removes CMake code for automatic calculation of the number
of offline device compiler instances, to hand over control to developers
instead as it incurs a rather large memory usage with around 8GB per
instance at peak.
Use SYCL_OFFLINE_COMPILER_PARALLEL_JOBS CMake variable to configure it.
- Prefer bash over sh to so it's unambiguous which features can be used.
- Use array syntax to specify main package list, allowing to comment
why packages are required and making git-blame easier to track down
commits that add/remove packages.
- Add license header.
This commit replaces the `Mesh_Runtime` struct embedded in `Mesh`
with `blender::bke::MeshRuntime`. This has quite a few benefits:
- It's possible to use C++ types like `std::mutex`, `Array`,
`BitVector`, etc. more easily
- Meshes saved in files are slightly smaller
- Copying and writing meshes is a bit more obvious without
clearing of runtime data, etc.
The first is by far the most important. It will allows us to avoid a
bunch of manual memory management boilerplate that is error-prone and
annoying. It should also simplify future CoW improvements for runtime
data.
This patch doesn't change anything besides changing `mesh.runtime.data`
to `mesh.runtime->data`. The cleanups above will happen separately.
Differential Revision: https://developer.blender.org/D16180
Allows improving performance with BLI_task.hh in draw extraction code.
Threading added in c15a63d21e improved performance by 3-4x
for me, but didn't make a difference until now.
According to information I gathered, ffmpeg seeks internally using DTS
values instead of PTS. In some files DTS and PTS values are offset and
ffmpeg fails to seek correctly to keyframe located before requested PTS.
This issue become evident after hardcoded preseek of 25 frames was
removed and effort went into more precise seeking to improve
performance. It was thought, that this is bug in ffmpeg code, but
after reading some discussions, I don't think it is considered as such
by their developers, see below:
http://ffmpeg.org/pipermail/ffmpeg-devel/2018-March/226354.htmlhttps://trac.ffmpeg.org/ticket/1189
Best solution seems to be to add small preseek value possibly at
detriment of performance, so 3 frames of preseek are applied. Number 3
was chosen experimentally.
Performance impact seems to be insignificant with this change.
Reviewed By: zeddb
Differential Revision: https://developer.blender.org/D15847
Currently there is no way to tell that these node types are deprecated
in the UI. This commit adds "(Legacy)" to the end of the names.
It also makes it simple to skip these in the various node searches
more automatically than before.
Fixes T101700
Differential Revision: https://developer.blender.org/D16223
Don't add the radius attribute to point clouds by default, since not
having a radius attribute should be a valid state. The radius is only
set when a radius attribute also exists on curves.
Currently Cycles uses zero as a default radius when no "radius"
attribute exists. This is more confusing than helpful. Instead,
use the same default radius as EEVEE and Workbench.
This patch enables MNEE on macOS >= 13. There was an inefficiency in the calculation of spill requirements, fixed as of macOS 13. This patch also adds a temporary inlining workaround for a Metal compiler bug which causes `mnee_compute_constraint_derivatives` to behave incorrectly.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D16235
When the active selected object in the 3DView is already a local
liboverride, only perform the 'clear system flag' process on selected
objects, there is no point in trying to create an override out of it.
When image data exceeds half float ranges values are set to +/-
infinity that could lead to artifacts later on in the pipeline.
Color management for example.
This patch adds a utility function `IMB_gpu_clamp_half_float`
that clamps full float values to fit within the range of
half floats.
This fixes T98575 and T101601.
- Support switching between libdecor and xdg_shell at run-time.
- Require libdecor when using gnome-shell, otherwise use xdg_shell.
- Gnome-shell detection checks for a gtk_shell* interface which
isn't ideal however it's not possible to check server-side-decorations
are supported without first creating a window.
- Unload Wayland libraries when Wayland fails to load.
- Give functions and variables more descriptive names
- Use references for arguments
- Use tree topology cache to avoid iterating over all links
- Group related code together
Besides texture nodes, which aren't supported anyway, we don't have any
builtin nodes that still use the socket template system, so this can be
removed.
This change is part of a wider set of changes to implement Grid and Pixel
snapping in the UV Editor. This particular change adds a new third option,
`pixel grid`, to the previous grid options, `dynamic grid` and `fixed grid`.
Maniphest Tasks : T78391
Differential Revision: https://developer.blender.org/D16197
A refactor of the margin calculation of UV packing, in anticipation
of multiple packing methods soon becoming available.
Three margin scaling methods are now available:
* "Add", Simple method, just add the margin. [0]
(The default margin scale from Blender 2.8 and earlier.)
* "Scaled", Use scale of existing UVs to multiply margin.
(The default from Blender 3.3+)
* "Fraction", a new (slow) method to precisely specify
a fraction of the UV unit square for margin. [1]
The "fraction" code path implements a novel combined search / secant
root finding method which exploits domain knowledge to accelerate
convergence while remaining robust against bad input.
[0]: Resolves T85978
[1]: Resolves T90782
Differential Revision: https://developer.blender.org/D16121
This lowers the search weight for color-specific
mix functions on non-color sockets.
Reported in blender.chat by simonthommes
Differential Revision: https://developer.blender.org/D16228
* 'Original coordinates' mode can't be used in image paint mode
(it does nothing in this case anyway).
* SCULPT_automasking_factor_get now returns 1.0 if
a PBVH_REF_NONE vertex reference is passed in.
Do not save the "use_proportional_edit" property if it is not supported.
This prevents it from being automatically disabled.
And hide "use_proportional_edit" in `SPACE_NLA`
harvesting openpgl_Exports-debug.cmake was missing for
windows in the build script, and we manually added it
to svn when openpgl landed when we realized it was
missing.
This fixes the issue at the root of the problem, so
the file will not be missing for future updates.
Cryptomatte uses alpha node, which was altered to by default
apply the alpha. This patch changes it back to replacing the
alpha.
Reviewed By: jbakker
Maniphest Tasks: T101601
Differential Revision: https://developer.blender.org/D16165
The parallel reduction file didn't include its own header, which can
yield "no previous declaration" warnings. This patch includes the header
to fix the warning.
This commit contains the CTest integration.
Starting with the very simple tests for the recent fixes in the
io_corve_svg addon which were related on closing path.
The idea is to use same framework as what we use for render tests
to make it easily visible what aspect of SVG changed or broke.
In order to achieve this both .blend and .svg files are used.
The .svg file defines the exact subject of test, and the .blend
file defines camera, and possibly material.
The longer term idea is to have a number of atomic tests for a
specific SVG features to help isolating problematic areas, as
well as a more comprehensive tests to perform QA.
For some compiler and linker configurations, linking would fail as the
wayland libs were linked at a high level and not at the actual code
where they were needed.
After talking to Campbell, we decided to clean up this part and now
only link both the X11 and Wayland libs where they are used.
This patch implements the variable size blur option in the Bokeh Blur
node. The implementation is different from the CPU one in that it also
takes the Bounding Box input into account, which is ignored for some
reason for the CPU. Additionally, this implementation does not do the
optimization where the search radius is limited relative to the maximum
value in the size texture. That's because the cost of computing the
maximum is not worth it for most use cases.
The reference implementation does three unexpected things that are
replicated here nonetheless. First, the center bokeh weight is always
ignored and assumed to be 1. Second the size of the center pixel is
taken into account. Third, a unidimensional distance is used instead of
a 2D euclidean one. Those need to be considered independently.
Differential Revision: https://developer.blender.org/D16185
Reviewed By: Clement Foucault
This patch implements generic parallel reduction for the realtime
compositor and implements the Levels operation as an example. This patch
also introduces the notion of a "Compositor Algorithm", which is a
reusable operation that can be used to construct other operations.
Differential Revision: https://developer.blender.org/D16184
Reviewed By: Clement Foucault
In 22c3db72ca `SHOW_ALL` has been removed from
`face_set_change_visibility`. Instead `SCULPT_OT_reveal_all` is now used
for unhiding all face sets.
Reviewed By: Joseph Eagar & Julian Kaspar
Differential Revision: https://developer.blender.org/D16199
Ref D16199
The crash was caused by [0] however knife-project functionality has been
incorrect since [1] which would loop over each edit-mode object and run
the knife project function which operated on all edit-mode objects too.
- Resolve the crash by postponing face-tessellation recalculation
until the knife tool has cut all objects
- Objects occluding each other is now supported
(an old TODO and something that was never supported).
[0]: 690ecaae20
[1]: 6e77afe6ec
Previously only failure to dynamically load libdecor would report a
warning. Now report failure to load all Wayland libraries.
This was done because Wayland libraries (besides libdecor) are likely to
be installed on systems running Wayland. However it makes it difficult
to troubleshoot failure to load Wayland on systems with libdecor.
Only silence Wayland dynamic loading warnings when Wayland isn't running.
Cleaned up Dyntopo original triangle API (which is deprecated):
* BMVerts for original triangles are now stored.
* BKE_pbvh_bmesh_update_topology now handles original triangle
* data properly.
* BKE_pbvh_bmesh_node_save_orig can now initialize the original
coordinates from the current BMLogEntry.
* Ray casting of original data now returns active vertex.
Should fix various random crashes.
Hopefully this will fix a number of bugs.
Cleaned up sculpt_face_sets_change_visibility_exec some more:
* SCULPT_UNDO_HIDDEN is now pushed instead of SCULPT_UNDO_FACE_SETS
(since face sets no longer encode visibility).
* Added branches for if face sets do not exist.
* Cleaned up independent if statements into a switch.
This change adds support for intels cve-bin-tool [1]
in the deps builder. This adds 2 new targets to the
builder that do not build automatically but can be
build on demand when required.
`make cve_check` will output to the console.
`make cve_check_html` will output a html file that
can be shared with other people.
Requirements:
- A working installation of cve-bin-tool on the system
Not required but higly recommended:
- Obtaining a key from the nvd [2] to speed up the
database download. you can pass the key to cmake
using `-DCVE_CHECK_NVD_KEY=your_api_key`
[1] https://github.com/intel/cve-bin-tool
[2] https://nvd.nist.gov/developers/request-an-api-key
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D16160
The issue here was that PathTraceWork was set up before checking if
any error occurred, and it didn't account for the dummy device so
it called a non-implemented function.
This fix therefore avoids creating PathTraceWork for dummy devices
and checks for device creation errors earlier in the process.
The confusion is about World as an ID type, and the World coordinates.
Use no context for the latter, and either `BLT_I18NCONTEXT_ID_WORLD`,
or other more fine-grained contexts when needed as part of enums for the
former.
The message from the custom HDRI installation operator cannot be
disambiguated right now, because Python enums don't support contexts.
Ref T43295
Reviewed By: mont29
Maniphest Tasks: T43295
Differential Revision: https://developer.blender.org/D16194
Refactor the `recalcData_nla()` function, which takes data from the
transform system and updates NLA strips, such that the actual logic to
change the strip is moved into its own function.
This also moves some generic code (find prev/next strip) from that
function to BKE.
This is to make the code easier to adjust when different transform
operations need to perform different modifications of the strip (i.e. to
fix T101130).
Manifest Task: T101130
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D16181
JIT compilation of oneAPI kernels now happens during load stage
and proper message gets shown in the GUI during compilation.
Also, this implementation skips kernels that aren't needed for
the used scene, reducing overall (re)compilation time.
Allows searching for Mix blend modes
e.g. Overlay when using link drag search
Requested by @simonthommes in GN chat
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D16209
Part of T101073: after the view layer sync was made lazy (D15885), the
BKE_layer_collection_resync_forbid and BKE_layer_collection_resync_allow
in Alembic/USD/OBJ importers is no longer needed, as long as they do
view layer dependent operations (selecting new objects) in a separate
loop after creating all the objects.
Verified that this does not regress import times for 26k objects OBJ
scene (Blender 3.0 splash) and 250k objects USD scene (Moana).
When calling `wm.call_menu_pie` and `wm.call_menu`, the menu context
was ignored when showing its name in the header or pie menu center.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D16195
X11 is used as a fallback when libdecor isn't found on the users system.
Now print a warning when Blender falls back to X11 and a missing
libdecor is the only reason wayland could not be used.
Only print this warning when using Wayland so this warning doesn't show
on X11 systems which have Wayland libraries installed.
Addresses T101715.
Requested in D16095 proposal - also USD & Alembic have import scale
option; OBJ has an export scale object but the import scale
was not there for some reason.
Show the windowing environment on non MS-Windows/Apple systems,
since X11/WAYLAND are selected startup there was no convenient way
for users to know which back-end was being used.
Include the windowing environment in the About splash & system-info.txt
since it will be useful for handling bug reports.
This commit adds a private API call not intended for general use
as I would like to be able to remove this later and it's only needed
in the specific case of testing if Blender is using WAYLAND or X11
(which maybe be used via XWayland).
Python scripts can already inspect the system to check which windowing
environment used, the API call is mainly useful for troubleshooting.
OSL (like Cycles) has no internal boolean type, instead an integer
input can be flagged to be shown as a boolean in the UI.
Cycles reacts to this by creating a boolean socket on the Blender
side, but as a result incorrectly called the boolean overload of the
set function even though the internal type is an integer.
There's another unrelated crash in the GPU viewport shader code that
appears to apply to every OSL node that outputs a shader, and the file
in T101702 triggers both, so this is only a partial fix for the report.
The importer logic was wrongly resetting "current material name"
upon encountering a new object ("o" command). However as per OBJ
specification, this is incorrect:
> Specifies the material name for the element following it. Once a
> material is assigned, it cannot be turned off; it can only be
> changed.
Fixes T101685. Test coverage for this was added in svn tests repo.
Use `inline constexpr` instead of `static const` to prevent these
variables from being duplicated in each translation unit that includes
the eevee_camera.hh header (was included into 17 different object files
with MSVC).
Differential Revision: https://developer.blender.org/D16200
The attribute node already allows accessing attributes associated
with objects and meshes, which allows changing the behavior of the
same material between different objects or instances. The same idea
can be extended to an even more global level of layers and scenes.
Currently view layers provide an option to replace all materials
with a different one. However, since the same material will be applied
to all objects in the layer, varying the behavior between layers while
preserving distinct materials requires duplicating objects.
Providing access to properties of layers and scenes via the attribute
node enables making materials with built-in switches or settings that
can be controlled globally at the view layer level. This is probably
most useful for complex NPR shading and compositing. Like with objects,
the node can also access built-in scene properties, like render resolution
or FOV of the active camera. Lookup is also attempted in World, similar
to how the Object mode checks the Mesh datablock.
In Cycles this mode is implemented by replacing the attribute node with
the attribute value during sync, allowing constant folding to take the
values into account. This means however that materials that use this
feature have to be re-synced upon any changes to scene, world or camera.
The Eevee version uses a new uniform buffer containing a sorted array
mapping name hashes to values, with binary search lookup. The array
is limited to 512 entries, which is effectively limitless even
considering it is shared by all materials in the scene; it is also
just 16KB of memory so no point trying to optimize further.
The buffer has to be rebuilt when new attributes are detected in a
material, so the draw engine keeps a table of recently seen attribute
names to minimize the chance of extra rebuilds mid-draw.
Differential Revision: https://developer.blender.org/D15941
Enable the following CMake options:
- WITH_GHOST_WAYLAND
Enable Wayland which is now included as part the bundled dependencies.
When the pre-compiled libraries aren't used, only X11 will be enabled.
- WITH_GHOST_WAYLAND_DYNLOAD
So systems without libwayland can fall back to X11.
- WITH_GHOST_WAYLAND_LIBDECOR
To draw window frames on WAYLAND compositors such as gnome-shell which
expect client-side decorations (without this the Blender window is
borderless).
Unfortunately there doesn't seem to be a reliable way to know if the
compositors handles server-side decorations, so libdecor is required
for Wayland to be used even with KDE and tiling compositors where it's
not needed. Although this is an area that could use some further
investigation - possibly bundling libdecor or handling client-side
decorations in Blender.
The final part of D16091.
This can improve performance by 3-10x in some simple test cases,
when reading a boolean attribute on a different domain from the
one it's stored on.
Differential Revision: https://developer.blender.org/D16054
Before, the active spline index and the active point index were always
cleared. Now the active index is only cleared when the curve/surface is
deleted. This was accomplished by making the surface patch delete
function handle that correctly. The spline deletion already handled it.
This fixes only vertex deletion mode.
Fixes problem mentioned in T101160.
Differential Revision: https://developer.blender.org/D16133
When using pre-compiled libs, reference the bundled wayland headers,
needed so the headers from the bundled wayland-scanner are compatible.
Part of D16091.
The headers on centOS7 (Wayland 1.15) aren't compatible with the headers
generated by wayland-scanner 1.20.
Include the headers to support building Wayland on systems with
older Wayland installed.
Using these headers will be part of a separate commit.
Part of D16091.
The actual length of extension lines can be adjusted using wheel mouse
but this is very inconvenient for tablet users.
Now, the extension can be adjusted using MMB of the pen.
There was a similar request in Right-Click Select
Reviewed By: Matias Mendiola, Daniel Martinez Lara
Differential Revision: https://developer.blender.org/D16128
It fixes SYCL runtime issues in Debug builds that were due to mixing
Release and Debug MSVC runtimes.
This commit also removes specific handling of dpcpp compiler executable
to simplify the CMake implementation. Using it like clang++ works and
clang++ executable is also available from Intel oneAPI DPC++ compiler in
case it doesn't.
This is part of the effor to simplify the View struct in order to implement
multiview rendering.
`mouse_pixel` is only use for debug purpose and will be reintroduced later.
`is_inverted` is moved to `draw::View`.
This is part of the effor to simplify the View struct in order to implement
multiview rendering.
The viewvecs can easilly be replace by projection matrix operation.
Even if slightly more complex, there is no performance impact.
This is part of the effor to simplify the View struct in order to implement
multiview rendering.
The CameraTexCoFactors being only valid for a single view, and being only
used in very few places, it make sense to move it to the engine side.
The modifier already contained a check to skip complex processing of
vertices that won't produce any deformation due to the vertex group
mask, but this only works for the non-Multi Modifier case. This adds
a similar check for the Multi Modifier mode.
Differential Revision: https://developer.blender.org/D16152
Updates the function checking if a container can have grease pencil layer keyframes, to account for dopesheet in main mode, and timeline.
Reviewed By: Sybren A. Stüvel
Differential Revision: http://developer.blender.org/D16132
Used in action_select to refactor the selection operators.
No functional changes.
Reviewed By: Sybren A. Stüvel
Differential Revision: http://developer.blender.org/D16168
This is a minimal set of changes, allowing a lot of cleanup that can
happen afterward as it allows sycl method and objects to be used outside
of kernel.cpp.
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D15397
Functions in vfontdata_freetype.c used static variables instead of
argument parsing. This originates from initial freetype support [0].
This didn't cause problems as callers use a global lock, however it
makes the code more difficult to follow means we can more easily remove
the lock in the future.
[0]: d4f9678b39
GNOME (mutter) intentionally doesn't follow the Wayland spec for the
keyboard_enter events (held keys are always an empty array).
This means we can't know which keys are held on window activation,
making the result of getModifierKeys invalid (in that we don't know
which modifiers are held).
Detect this situation and suppress warnings as the issue has been
reported and it doesn't help for users to see noisy warnings for
a known problem.
Objects/bones in the selection menu weren't ordered usefully,
worse, the closest items could be left out of the menu since items
would stop being added once the menu-size limit was reached.
Resolve this by sorting the menu items by depth, removing the most
distant when the number of items exceeds the limit.
When Ctrl is held, order by the distance to the object center
instead of depth.
Remove redundancy in the testing and loading of VFont fonts. Includes
improved setting of character map for using Wingding and Symbol fonts.
See D16174 for more details.
Differential Revision: https://developer.blender.org/D16174
Reviewed by Campbell Barton
When app-templates are enabled, support resetting defaults only for the
app-templates.
Without this, it's not possible to reset app-template preferences
without also resetting the default preferences for all settings the
app-template does not override (used when there is no application
template loaded, and other app-templates).
These additional menu items are shown in menus when an app-template has
been loaded.
Address issue raised by T96427.
Reviewed By: mont29, brecht
Ref D16150
Setting pbvh->leaf_limit (the max triangles per node)
too low results in lots of distinct GPU meshes, which
can be slow for even moderately sized sculpt meshes
(starts to be a problem around 100-150k triangles).
Preloading of BFont (default for 3D Text Objects) glyphs will not load
any with a character code greater than 256, resulting in 43 characters
that are inaccessible. This patch corrects that preloading code.
See D16122 for more details
Differential Revision: https://developer.blender.org/D16122
Reviewed by Campbell Barton
In the driver editor and the "edit driver" popover, add a checkbox that
can mute the driver. This is the same functionality as the checkbox in
the driver editor's channel list, but then exposed in a different place
in the UI.
This is for convenience, such that a driver can now be muted by
right-clicking on the driven property, choosing "Edit Driver", then
muting it there. The same checkbox was added to the regular driver
editor's header for consistency.
Reviewed By: Severin
Maniphest Tasks: T101592
Differential Revision: https://developer.blender.org/D16173
The name of the node group in the geometry nodes logger is created
in `GeoModifierLog::get_local_tree_logger`, where it references the
compute context. However, the compute context is a local variable
that doesn't live as long as the log. Therefore the log needs to own
the node group name.
Removing the ownership from `NodeGroupComputeContext` may be
possible as well, but seems less obviously correct. This can be a
temporary solution until we can completely avoid storing strings
in the logger (see D15775).
Fixes T101599
Fix an issue where a `UI_BTYPE_CHECKBOX_N` button couldn't be toggled.
When toggling the value of a property, the `UI_BTYPE_TOGGLE_N`,
`UI_BTYPE_ICON_TOGGLE_N`, and `UI_BTYPE_CHECKBOX_N` types shouldn't
matter. These determine the inverted display of the value, but toggles
of that value should still happen once.
For these button types, the toggle happened twice, effectively making it
a no-op. The code for individual values is now also consistent with the
code for handling bit-flags.
Actually found & over-the-shoulder-reviewed by @Severin
Add a script to set up a Linux CentOS 7 machine so that it can be used
to build the precompiled libraries for Linux.
Reviewed By: sergey, brecht
Differential Revision: https://developer.blender.org/D16171
Changing volume parameters during rendering could cause a crash
when guiding was enabled. It was due to an unintialized state paramter
at the beginning of the path tracing process.
In addition guiding is disabled when dealing with almost delta volumes
(i.e., g close to 1.0 or -1.0).
Freeze happened when reloading a library while having an Object property
with a custom getter function defined in Python.
Just piggybacking on rB62eb21e3ce87, this just applies the same fix (use
the BPy_BEGIN/END_ALLOW_THREADS macros) to relading from RNA/py.
All credit goes to @brecht and @mont29.
Maniphest Tasks: T101618
Differential Revision: https://developer.blender.org/D16167
Crash happened when adjusting operator props in Adjust Last Operation
panel.
When there are more than 32 objects selected in muti-object-editmode, we
are running into RNA array limit (`objects_selection_count` is defined as
an RNA array (which can only hold 32 entries, see
`RNA_MAX_ARRAY_LENGTH`), leading to reading random memory errors.
While there might be ways to make this work with more than 32 selected
objects (e.g. by instead using a collection, or investigate supporting
dynamic sized arrays for run-time RNA), this patch only cancels the
operator with a report message (instead of crashing).
Maniphest Tasks: T101492
Differential Revision: https://developer.blender.org/D16115
The problem was the conversion to object space converted the
points to zero.
Now, the new function `zero_axis_bias_m4` is used in order to add
a small bias in the inverse matrix and avoid the zero points.
A known math issue is the stroke can be offsetted if the scale is set to 1
again. In this case apply the scale to reset to 1.
Differential Revision: https://developer.blender.org/D16162
Since add-on info was made translatable in D15747, user-installed
add-ons could also get their info extracted. This led to having
different messages depending on the environment of the Blender doing
the I18n messages update.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15963
Fix reroute nodes added via the cut link gesture being parented to the
wrong frame node.
The frame's bounds that are used for the intersection test with the
newly added reroute are in view space, but the reroute's location was
given in the node tree's coordinate space, when the add reroute
operator was recently refactored (56193eccf6).
Reviewed By: Hans Goudey
Differential Revision: http://developer.blender.org/D16163
Uses soft and hard max of the resolution properties.
Range for order U/V was 2-6, but after testing higher max values with
NURB splines and surfaces with many control points, no problems were
found.
Reviewed By: campbellbarton
Ref D13918
Adding object-data that doesn't support edit-mode would raise an
exception when the "Enter Edit Mode" preferences was enabled.
Other changes:
- Don't attempt to enter edit-mode for library-data.
- Support entering edit-mode for grease-pencil objects.
Alternate fix for the issue raised by D15999.
Using 'short' was historic (as the value was stored in the Base).
Prefer floats which allow sub-pixel distances to be differentiated.
Also remove IS_CLIPPED assignment as this only made sense when the
values were stored in the Base, without any other ways to check
if projection failed.
In some situations the zero axis can produce problems and need to add a small bias.
This function adds a small bias using the orthogonal result of the others valid axis.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D16158
6d
This also removes the need to compute the persmat and saves some memory
from the `ViewInfos` struct. This is needed to allow multiview support.
Initial testing found no major performance regression during vertex
heavy workload.
Test file: {F13610017}
Results:
| Platform | Master | Split Matrix|
| Linux + Mesa + AMD W6600 | 48 fps | 47 fps |
| Macbook Pro M1 | 50 fps | 51 fps |
| Linux + NVidia 1080Ti | 51 fps | 52 fps |
| Linux + Radeon Vega 64 | 25.6 fps | 26.7 fps |
Increased precision when far from origin:
{F13610024}
{F13610025}
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D16125
During the 3.3 release some packages were missing
in SVN during the release and it ended up building
the release tarball without issues when re-running
the `make source_archive_complete` command after it
failed initially. The tarball however had 0 byte files
for the missing packages.... not good.
This diff hardens the download process by :
1) Validating all required variables are set. This
catches the erroneously attempt at downloading the
nanovdb package even though we have removed it
from versions.cmake but neglected to remove it
from download.cmake
2) When a download fails (due to either a missing
package, or bad download URL) FILE Download will
warn about a hash mismatch but will carry on
happily, you then have to go into the file system
go delete the 0 byte file to retry the download.
We know for a fact the file is bad when it is 0
bytes, just delete it.
3) When we are using the blender repository
(and likely building a source archive) explicitly
validate the hash of all packages. Normally the
build process does this, however when building
a source archive the build does not actually
run for a dep. So preform this check during the
configuration stage.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D16124
Completely skip the work of interpolating domains for single values
for many to and from combinations. Similar to 535f50e5a6,
but slightly more complex because of the possibility of loose elements
on some mesh domains.
From D16054, with added comments.
Unfortunately this commit changed behavior in a fundamental way that
can't be addressed without larger changes. Previously the position
outputs were evaluated on the edge domain and then interpolated to the
context domain, which could be useful for some rudimentary mesh smoothing.
After the commit they were just evaluated at the specified index, which
looks practically random when evaluated on a different domain. We may need
a new node that doesn't have the implicit behavior in the future.
This reverts commit 4ddc5a936e.
There were two issues with the unit extraction regex:
- it didn't take the inches, feet, arcminutes and arcseconds symbols
into accounts, which aren’t letters but ' and ";
- some units have more than one B_UNIT_DEF_* flag.
This allows extracting feet, inches, square millimeters, cubic
millimeters, arcminutes, and arcseconds.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D16144
- Active Track (NLA vs movie clip)
- New (file)
- Object Index (loop cut)
- Object Index (render pass)
- Proxy Storage (sequence)
- Rim (Solidify modifier)
- Roughness (particle children)
- Spaces (text whitespace)
- Out (sequencer wipe transition)
Also make new asset tag name translatable.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D16067
These item names and descriptions never got extracted because they're
not in the RNA until the proper context occurs, and so the extraction
script never even knew about them.
The properties are mostly located in the fluids UI.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15994
RNA code to create new actions did not properly remove the extra user
set by default, as done in other `new` callbacks of other ID types.
NOTE: Mask ID had the same issue, also fixed in this commit.
NOTE: At some point this needs to be properly fixed, default super-low
level ID creation code should simply not add a 'default' user, this is
extremely bad design and forces higher-level code to do all kind of
extra work to get rid of it half of the time, in very unclear and
confusing ways and places.
Blender is using more and more temporary Main data-base (historically
for reading linked data, but also now when resyncing liboverrides, for
temp data in asset code, etc.).
This commit aims at making this a bit more formal and defined, by:
* Adding a dedicated flag in Main struct to mark a Main as global.
* Adding some API to replace, or temporarily swap the current global
Main (`G_MAIN`) by another one.
NOTE: Having to temporarily replace `G_MAIN` is a workaround for the
limitation of current RNA, ideally this should be fixed in RNA itself,
but for now at least having an API helps tracking those cases (since
this is potentially risky operation).
This work is also a preparation for more usages of temp mains in the near
future (Asset Brushes and its presets system e.g. will most likely use
temp mains too).
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D15977
To the user, this looks like a disfunctional thing (usually greying out
is used for props having no effect).
The greying out is caused by
{rB8b7cd1ed2a17e40661101eea4adae99e8e3d02e9}.
Above commit disabled the direct renaming of images in the
`TEXTURE_UL_texpaintslots` UIList (and instead displays the texture slot
directly as a prop -- which has its `PROP_EDITABLE` flag cleared)
(from the commit message):
> A limitation of this patch is that is isn't possible anymore to rename
images directly from
> the selection panel. This is currently allowed in master. But as
CustomDataLayers
> aren't ID fields and not owned by the material supporting this wouldn't
be easy.
To work around the UI confusion (but still keep the non-editable nature
of the property), now just display this as a label.
Maniphest Tasks: T101334
Differential Revision: https://developer.blender.org/D16138
Was not passing user_data to id_override_library_delete_hierarchy_fn.
Also correct a wrong assert.
Greenlit by @mont29 in T101306.
Should also go into 3.3 LTS.
Saving non app-template preferences would use add-ons and other
app-template settings to write the default preferences if there was no
existing user preferences file saved.
Suppress warning when saving app-template preferences.
Check if the preferences exist before attempting to read them,
while harmless it looked as if something went wrong.
- Document the behavior of app-template IO for preferences.
- Add doxy-sections for each kind of blend file IO.
- Clarify BKE_blender_userdef_app_template_data_swap doc-string.
The code already had a check for meshes with zero triangles, but it
didn't catch the case where all triangles are flagged as degenerate.
A simple way to reproduce this is to take a mesh and scale it to zero.
After checking the code, it turns out that in this case it's supposed
to just set all tangents to zero, so the fix simply is to detect this
case and skip the computation.
Add function `SEQ_time_content_end_frame_get` to get content end frame.
New function is shorthand for
`SEQ_time_start_frame_get() + SEQ_time_strip_length_get()`.
This versioning needs to be done after linking in order to affect
animation data which might not be loaded in the regular "do_versions"
loop. Animation data is removed in `nodeRemoveNode`.
Fixes T101439
To avoid issues with install_deps. If we more generally switch to using
CMake configs then perhaps this code can be deduplicated again or at
least simplified.
This change speeds up the compilation at the cost of higher memory usage.
CMake implementation checks the amount of available memory to spawn a
reasonable number of parallel compiler jobs.
On GCC, the loops created by `BLI_VEC_OP_IMPL` were not always
unrolled, leading to branching. For `attribute_math::mix4<float3>`,
this lead to a significant performance regression compared to its
older `interp_v3_v3v3v3v3` counterpart.
Instead of a using macros to create the for loops, use variadic
templates to manually unroll them. The compiler might do it anyway
(I didn't observe any effect on Clang in my tests), but there should
be no reason not to unroll these small loops, and making it explicit
and removing use of macros seems better.
On a Ryzen 3700x, this commits doubles the performance of Catmull
Rom curve position evaluation (from 18-19ms to around 9-10ms).
Differential Revision: https://developer.blender.org/D16136
After rB188f7585a183 deleting the object results in crash due
to null pointer access if collections are filtered out
Reviewed by: mont29
Differential Revision: https://developer.blender.org/D16031
Fix for T101438
Clamping the mip seems to always set it to 9.0.
I couldn't find an alternative way to avoid triggering the error (ie. min(mip, 9.0)).
In any case, the results with this patch applied look the same to the (correct) ones on AMD.
And, since clamping the max mip to a hardcoded value could result in resolution-depended behavior, I guess disabling the clamp should be ok anyway.
Reviewed By: fclem
Maniphest Tasks: T101438
Differential Revision: https://developer.blender.org/D16129
Change some wording of tooltips for readability, in animation-related
areas (drivers, keying sets, animation channel visibility).
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D16131
Update to liboverride creation code to add support of keeping active
object forgot to consider case when there is no known/given view layer.
NOTE: due to differences in code, fix for 3.3 will be a bit different.
Similar to existing `BKE_main_collection_sync` and `BKE_scene_collection_sync`,
in some cases code does not have access to a specific view layer,
and/or does not know exactly which view layer needs to be in sync,
or just need the full data to be up to date.
Rename BKE_appdir_folder_id_version to
BKE_appdir_resource_path_id_with_version because BKE_appdir_folder_id
and BKE_appdir_folder_id_version didn't accept compatible arguments.
Also add notes to GHOST_getSystemDir & GHOST_getUserDir that
BKE_appdir_resource_path_id(..) should be used instead (in most cases).
Even though individual USER/SYSTEM paths could be set using environment variables,
it wasn't possible to override the USER or SYSTEM paths.
This meant the result of `bpy.utils.resource_path('USER')` &
`bpy.utils.resource_path('SYSTEM')` could still be used by scripts,
making the Blender session potentially the default USER directory
(even when `BLENDER_USER_CONFIG`, `BLENDER_USER_SCRIPTS` &
`BLENDER_USER_DATAFILES` all point elsewhere).
Resolve by adding environment variables:
- BLENDER_USER_RESOURCES
- BLENDER_SYSTEM_RESOURCES
These will be used for `bpy.utils.resource_path('USER')` &
`bpy.utils.resource_path('SYSTEM')`, as well as a basis for user &
system directories, unless those environment variables are
set (`BLENDER_USER_*` or `BLENDER_SYSTEM_*`).
Resolves issue raised by T101389.
Example usage & output:
{P3225}
Reviewed By: brecht
Ref D16111
* Unhide all is no longer part of face_set_change_visibility.
* Implemented a few visibility API methods for PBVH_BMESH
* Fixed bug with unhide all not freeing all multires grid_hidden
bitmaps.
This is the conventional way of dealing with unused arguments in C++,
since it works on all compilers.
Regex find and replace: `UNUSED\((\w+)\)` -> `/*$1*/`
Blank brush strokes never have an oppurtunity to initialize
a sculpt undo step, which results in blank global undo steps.
These confuse DynTopo's internal BMLog undo stack.
Note: I tried having the stroke operator return OPERATOR_CANCELLED,
but this didn't prevent the undo push (which is done automatically
due to the presence of OPTYPE_UNDO in the operator flags).
I might investigate removing the flag, but that might cause other
problems.
Previously the edge index was always determined by the field context,
and the node didn't work when the context was in any other domain.
Adding an index input makes it work much more nicely with the other
topology nodes. It's now in the topology submenu too.
I also reimplemented the edge positions input to use the field at index
node internally. That will probably make it slower for now, but we need
to optimize that to do nothing in some special cases anyway.
Differential Revision: https://developer.blender.org/D16105
Rename the node to "Offset Point in Curve"
Since this was committed, more mesh and curve topology nodes have been
committed with a different naming scheme (482d431bb6). Change
the name of this node to match "Offset Corner in Face". Because the
node was only added recently, it's a full rename, including the ID,
so forward compatibility is broken.
This node allows for curves to have their evaluated normal mode changed
between MINIMUM_TWIST and Z_UP. A selection input allows for choosing
which spline in the curves object will be affected.
Differential Revision: D16118
Previously it would bake viewed from above the surface. The new option can be
useful when the baked result is meant to be viewed from a fixed viewpoint or
with limited camera motion.
Some effort is made to give a continuous reflection on parts of the surface
invisible to the camera, but this is necessarily only a rough approximation.
Differential Revision: https://developer.blender.org/D15921
This was not properly respected, and in general with multiple passes and layers
it's unclear what this should do exactly without breaking some render passes.
Better to keep this image format for raw unmodified render results.
The Instancer mode of the node is intended for varying material
behavior between instances. Since Geometry Nodes support arbitrary
named instance attributes, this mode should include them in lookup.
To implement this it is sufficient to store references to Geometry
Node data in DupliObject, and check it during dupli attribute lookup.
In order to reduce the memory usage of DupliObject, only 4 array
entries are allocated, even though the current dupli recursion stack
limit is 8. This assumes that not every entry would be associated with
a GeometrySet instance. Hopefully, soon the whole system will be
rewritten to remove the hard limits altogether.
Differential Revision: https://developer.blender.org/D16114
This node allows sampling an attribute on a mesh surface based
on a UV coordinate. Internally, this has to do a "reverse uv lookup",
i.e. the node has to find the polygon that corresponds to the uv
coordinate. Therefore, the uv map of the mesh should not have
overlapping faces.
Differential Revision: https://developer.blender.org/D15440
The UV data filling logic was incorrectly just skipping over loop
entries that don't have a UV coordinate, instead of assigning
the default zero UV for them. This was a problem only for meshes
where some faces did have UVs, but some other faces did not (T101487).
Historically, caching these values may have had some advantages,
simplifying drawing object centers and selecting by object center.
Now the only uses of these values would calculate the projection
before use, so there is no reason to store run-time projection in DNA.
This also quiets a `-Wstring-overflow` warning.
Issue introduced by rB208b3a0472b3
which fixed a build issue on linux.
This fix is a band-aid at best but
reverting rB208b3a0472b3 is not
really an option since that would
break linux again.
This allows the creation of texture arrays from 1D/2D/Cube texture.
This is useful when the shader expect a texture array but the original
texture isn't.
gpencil_point_to_parent_space -> gpencil_point_to_world_space
The old name was not clear because it looked it was moving into
the object space, but really is doing the opposite.
gpencil_apply_parent->gpencil_world_to_object_space
gpencil_apply_parent_point->gpencil_world_to_object_space_point
The old name was not descriptive enough.
Crash triggers due to division by zero
fix is to increase minimum limit for `seg_repeat` to 1
Reviewed By: antoniov, frogstomp
Maniphest Tasks: T101504
Differential Revision: https://developer.blender.org/D16120
Even if multires in sculpt mode doesn't yet support color
attributes, we should at least upload white color to avoid
making everything black.
Also fixed a bug where multires PBVHs didn't have access to
their CustomData attribute layout, which PBVH draw needs.
Currently lookup of Object and Instancer attributes is completely
duplicated between Cycles, Eevee and Eevee Next. This is bad design,
so this patch aims to deduplicate it by introducing a common API
in blenkernel.
In case of Cycles this requires certain hacks, but according to
Brecht it is planned to be rewritten later for more direct access
to internal Blender data anyway.
Differential Revision: https://developer.blender.org/D16117
When e.g. grouping nodes into nodegroups, these would not show up
immediately in the Outliner (Blender File / Data API view).
Now send (unique combination, not used elsewhere) notifiers (and listen
for these in the Outliner).
Differential Revision: https://developer.blender.org/D16093
ED_view3d_win_to_3d_on_plane with do_clip enabled wasn't working in
non-camera orthographic views as it didn't take into account the ray
origin being centered to the view.
Resolve by testing viewport clipping after the ray has been projected.
Copy-by-value was used when iterating over unicode_samples which
then referenced an array from the value.
Resolve by referencing a const pointer to the unicode_sample array.
factor mode if topology or boundary modes are inactive
Factors mode (precomputing the automask) should initialize the
mask to 1.0 if no additive automasking modes are enabled, instead
of zero.
On NVidia GPUs, when the blue channel was between 0 and 0.1,
the overlay's alpha would increase, making it invisible.
With the `overlay_line_fb` frame buffer bound in `overlay_engine.cc`
there are two outputs to write to: the color and the line output, which
is used for making smooth antialiased lines. The overlay is in its
current position in the order of overlays so that it draws on top of
curve wire lines. Not writing to that second output is undefined
behavior, so fix it by writing zeros. In the future, the overlay
could be smoothed on curves using that second texture.
Thanks to Clément for the explanation of the issue!
After a lot of testing, this option is not required and
now this is managed by stroke_collsion.
If the stroke_collision is enabled, only collide strokes
are used.
If the cross point was in the extreme of the stroke the
collision was not detected because it could be
outside of the bbox.
Removed the bbox check because now it is
not necessary.
For consistency with other node systems in Blender and older
versions of geometry nodes, dangling reroute inputs should
not affect the output. When an input socket is linked to dangling
reroutes, its own value should be used instead.
Muted nodes and reroutes can potentially affect the output when
they are linked to an input socket and don't have any inputs on
their own.
The issues was that previously "logically linked sockets" where used
which hide reroutes and muted nodes away. The solution is to work
with the directly linked sockets instead and handle reroutes etc
explicitly.
The core issue seems to be that `BKE_curve_minmax` does not create the
correct bounding box for `Curve` data passed to the render engine.
That's because this `Curve` object does not contain the legacy curve
data structure.
Fixing this will likely require some more consideration, so this fix just
avoids the culling check for now, which is actually also done in
`OVERLAY_extra_wire` using the same approach.
This crash occurs when the bone is newly created. In certain
circumstances the depsgraph data for the armature is not updated,
causing `pchan_eval` to be NULL when the parent is updated. This causes
a segfault in `ED_object_parent_set` when the flags are updated.
This change fixes the underlying depsgraph bug, and also adds both an
assertion and NULL pointer check to `ED_object_parent_set` to better
handle this scenario if it recurs via another path.
Maniphest Tasks: T94441
Differential Revision: https://developer.blender.org/D16065
When check_all=True was passed,
- `os.path.join(bpy.utils.resource_path('USER'), "scripts")`
was used instead of BLENDER_USER_SCRIPTS.
- `os.path.join(bpy.utils.resource_path('SYSTEM'), "scripts")`
was used instead of BLENDER_SYSTEM_SCRIPTS.
Other minor changes:
- Simplify collecting paths.
- Don't add user-directories multiple times when check_all=True.
- Normalize paths before before checking duplicates to reduce the
change the same path is added multiple times.
Found these issues while investigating T101389.
In practice this didn't cause problems, but accessing scripts via
bpy.utils.resource_path('USER') ignores the BLENDER_USER_SCRIPTS
environment variable.
Two new normal-based automasking modes.
The first mode, "brush", compares vertex normals with the initial
normal at the beginning of the brush stroke.
The second, "view", compares vertex normals with the view normal.
If "occlusion" is on then rays will be shot from each vertex to test
if it is occluded by other geometry (note: this can be very slow).\
Only geometry inside the sculpt mesh is considered.
Each mode has an associated angular limit and a falloff.
Reviewed by: Julien Kaspar and Jeroen Bakker
Differential Revision: https://developer.blender.org/D15297
Ref D15297
Due to increased usage of typed arrays in C++ and name/offset based
access for BMesh, these are unlikely to be used again, and haven't been
used in many years.
Add new cavity automasking mode based on local mesh
curvature. Cavity masking is a great way to quickly add
detail in crevices and the like. It's meant to be used
with the Paint brush in color attribute mode. It does
work with other brushes but the results can be unpredictable.
{F13131497}
The old "dirty mask" operator has been replace with a new
"mask from cavity" operator that shares the same code with
cavity automasking.
Differences from the sculpt-dev implementation:
* It uses the word "cavity." When I first implemented
this I wasn't aware
this feature existed in other software (and other
paint modes in Blender),
and for reasons that escape me today I initially
decided to call it a concave or
concavity mask.
* The cavity factor works a bit differently. It's
no longer non-linear and functions as a simple
scale around 0.5f.
* Supports custom curves.
* Supports blurring.
Reviewed By: Julian Kaspar, Jeroen Bakker and Campbell Barton
Differential Revision: https://developer.blender.org/D15122
Ref D15122
Rewrite PBVH draw to allocate attributes into individual VBOs.
The old system tried to create a single VBO that could feed
every open viewport. This required uploading every color and
UV attribute to the viewport whether needed or not, often exceeding
the VBO limit.
This new system creates one VBO per attribute. Each attribute layout is
given its own GPU batch which is cached inside the owning PBVH node.
Notes:
* This is a full C++ rewrite. The old code is still there; ripping it out
can happen later.
* PBVH nodes now have a collection of batches, PBVHBatches, that keeps
track of all the batches inside the node.
* Batches are built exclusively from a list of attributes.
* Each attribute has its own VBO.
* Overlays, workbench and EEVEE can all have different attribute
layouts, each of which will get its own batch.
Reviewed by: Clement Foucault
Differential Revision: https://developer.blender.org/D15428
Ref D15428
This patch contains an initial set of nodes to access basic
mesh topology information, as explored in T100020.
The nodes allow six direct topology mappings for meshes:
- **Corner -> Face** The face a corner is in, the index in the face
- **Vertex -> Edge** Choose an edge attached to the vertex
- **Vertex -> Corner** Choose a corner attached to the vertex
- **Corner -> Edge** The next and previous edge at each face corner
- **Corner -> Vertex** The vertex associated with a corner
- **Corner -> Corner** Offset a corner index within a face
And two new topology mappings for curves:
- **Curve -> Points** Choose a point within a curve
- **Point -> Curve** The curve a point is in, the index in the curve
The idea is that some of the 16 possible mesh mappings are more
important, and that this is a useful set of nodes to start exploring
this area. For mappings with an arbitrary number of connections, we
must sort them and use an index to choose a single element, because
geometry nodes does not support list fields. Note that the sort
index has repeating behavior as it goes over the "Total" number of
connections, and negative sort indices choose from the end.
Currently which of the "start" elements is used is determined by the
field context, so the "Field at Index" and "Interpolate Domain" nodes
will be quite important. Also, currently the "Sort Index" inputs are
clamped to the number of connections.
One important feature that isn't implemented here is using the winding
order for the output elements. This can be a separate mode for some
of these nodes. It will be optional because of the performance impact.
There are several todos for separate commits after this:
- Rename "Control Point Neighbors" to be consistent with this naming
- Version away the "Vertex Neighbors" node which is fully redundant now
- Implement a special case for when no weights are used for performance
- De-duplicating some of the sorting logic between the nodes
- Improve performance and memory use of topology mappings
- Look into caching some of the mappings on meshes
Differential Revision: https://developer.blender.org/D16029
Because they are friendlier to use in C++ code than the existing mesh
mapping API, these mappings from one domain to another were often
reimplemented in separate files. This commit moves some basic
implementations to a `mesh_topology` namespace in the existing
mesh mapping header file. These is plenty of room for performance
improvement here, particularly by not using an array of Vectors, but
that can come later.
Split from D16029
When the visual aids are disabled, but the extend factor
is > 0, the lines must be extended, but not displayed.
Also, some variables renamed to clarify.
This adds support for showing geometry passed to the Viewer in the 3d
viewport (instead of just in the spreadsheet). The "viewer geometry"
bypasses the group output. So it is not necessary to change the final
output of the node group to be able to see the intermediate geometry.
**Activation and deactivation of a viewer node**
* A viewer node is activated by clicking on it.
* Ctrl+shift+click on any node/socket connects it to the viewer and
makes it active.
* Ctrl+shift+click in empty space deactivates the active viewer.
* When the active viewer is not visible anymore (e.g. another object
is selected, or the current node group is exit), it is deactivated.
* Clicking on the icon in the header of the Viewer node toggles whether
its active or not.
**Pinning**
* The spreadsheet still allows pinning the active viewer as before.
When pinned, the spreadsheet still references the viewer node even
when it becomes inactive.
* The viewport does not support pinning at the moment. It always shows
the active viewer.
**Attribute**
* When a field is linked to the second input of the viewer node it is
displayed as an overlay in the viewport.
* When possible the correct domain for the attribute is determined
automatically. This does not work in all cases. It falls back to the
face corner domain on meshes and the point domain on curves. When
necessary, the domain can be picked manually.
* The spreadsheet now only shows the "Viewer" column for the domain
that is selected in the Viewer node.
* Instance attributes are visualized as a constant color per instance.
**Viewport Options**
* The attribute overlay opacity can be controlled with the "Viewer Node"
setting in the overlays popover.
* A viewport can be configured not to show intermediate viewer-geometry
by disabling the "Viewer Node" option in the "View" menu.
**Implementation Details**
* The "spreadsheet context path" was generalized to a "viewer path" that
is used in more places now.
* The viewer node itself determines the attribute domain, evaluates the
field and stores the result in a `.viewer` attribute.
* A new "viewer attribute' overlay displays the data from the `.viewer`
attribute.
* The ground truth for the active viewer node is stored in the workspace
now. Node editors, spreadsheets and viewports retrieve the active
viewer from there unless they are pinned.
* The depsgraph object iterator has a new "viewer path" setting. When set,
the viewed geometry of the corresponding object is part of the iterator
instead of the final evaluated geometry.
* To support the instance attribute overlay `DupliObject` was extended
to contain the information necessary for drawing the overlay.
* The ctrl+shift+click operator has been refactored so that it can make
existing links to viewers active again.
* The auto-domain-detection in the Viewer node works by checking the
"preferred domain" for every field input. If there is not exactly one
preferred domain, the fallback is used.
Known limitations:
* Loose edges of meshes don't have the attribute overlay. This could be
added separately if necessary.
* Some attributes are hard to visualize as a color directly. For example,
the values might have to be normalized or some should be drawn as arrays.
For now, we encourage users to build node groups that generate appropriate
viewer-geometry. We might include some of that functionality in future versions.
Support for displaying attribute values as text in the viewport is planned as well.
* There seems to be an issue with the attribute overlay for pointclouds on
nvidia gpus, to be investigated.
Differential Revision: https://developer.blender.org/D15954
C4033 'function' must return a value
is a MSVC level-1 warning, clang and GCC
treat this as an error however, this
change promotes it to an error as well
for MSVC to mimic the GCC behaviour.
This commit is an improvement in the previous fill tool
changes in order to improve how the extended strokes
are managed.
* Now, the algorithm checks if the extend cross a standard stroke, not only extend strokes.
* Option to enable or disable the stroke cross checking
because this can be slow in very complex scenes.
* Added `D` key to toggle stroke cross option.
* Option to use only collide strokes to be used as fill limit.
If the option to use only collide strokes is enabled, the
open extensions are in different color.
* Status text now shows mode and the actual extend factor.
This commits also contains a refactor of the loops
to use arrays as much as possible.
Reviewed By: mendio, pepeland
Differential Revision: https://developer.blender.org/D16052
This adds callbacks to `SpaceType` to make each editor responsible to
manage their own .blend I/O, and moves relevant code from `screen.c`
to the editors files.
Differential Revision: D11069
Mathutils types were always GC tracked even when it wasn't intended.
Not having to track objects speeds up Python execution.
In an isolated benchmark created to stress test the GC
creating 4-million vectors (re-assigning them 100 times), this gives
an overall ~2.5x speedup, see: P3221.
Details:
Since [0] (which added support for sub-classed mathutils types)
tp_alloc was called which defaults to PyType_GenericAlloc which always
GC tracked the resulting object when Py_TPFLAGS_HAVE_GC was set.
Avoid using PyType_GenericAlloc unless the type is sub-classed,
in that case the object is un-tracked.
Add asserts that the tracked state is as expected before tracking &
un-tracking, to ensure changes to object creation don't cause objects
to be tracked unintentionally.
Also assign the PyTypeObject.tp_is_gc callback so types optionally GC
track objects only do so when an object is referenced.
[0]: fbd9364944
Active UI list index is usually not animatable.
Here specifically, the active list index is oly used for operators acting
on a specific (active) socket.
Note other props here were already made non-animatable in
rB1d3b92bdeabc.
Maniphest Tasks: T101341
Differential Revision: https://developer.blender.org/D16077
When verbose level 4 is enabled, Blender prints kernel performance
data for Cycles on GPU backends (except Metal that doesn't use
debug_enqueue_* methods) for groups of kernels.
These changes introduce a new CYCLES_DEBUG_PER_KERNEL_PERFORMANCE
environment variable to allow getting timings for each kernels
separately and not grouped with others. This is done by adding
explicit synchronization after each kernel execution.
Differential Revision: https://developer.blender.org/D15971
When setting the old face set custom data type, do it in the
"layers to write" vector instead of the mesh's poly custom
data layers, which weren't "prepared" yet. Otherwise this
could make the mesh's custom data typemap invalid.
Add support for opening Blender backup `.blend` files (`.blend1`, `.blend2`, etc) by dropping them into the window, just like regular .blend files.
{F13393482, size=full}
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D15700
Debug and Release libs are different libs on
Windows and will give linker errors when you
try to mix and match them.
This changes retrieves both libs and fills the
OPENPGL_LIBRARIES variable appropriately resolving
the linker error.
This patch optimises the Metal inlining policy. It gives a small speedup (2-3% on M1 Max) with no notable compilation slowdown vs what is already in master. Previously noted compilation slowdowns (as reported in T100102) were caused by forcing inlining for `ccl_device`, but we get better rendering perf by relying on compiler heuristics in these cases.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D16081
An bug with binary archives was fixed in macOS 13.0 which stops some spurious kernel recompilations. In older macOS versions, falling back on the system shader cache will prevent recompilations in most instances (this is the same behaviour as in Blender 3.1.x and 3.2.x).
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D16082
This patch adds 5th mode to Time offset modifier, which should allow
to create time segments list.
This will allow users to chain together multiple time ranges in 4 modes:
- Forward
- Backwards
- Pingpong
- Reverse Pingpong
It also comes with additional Repeat parameter which specifies number
of times particular segment should run.
The mechanic of it is transforming initial parameters into array of frames which
are mapped to existing cfra (current frame) value.
Prototype : https://jsfiddle.net/ha2sjw8p/3/
This is also closely aligned to community request:
https://blender.community/c/rightclickselect/Txhbbc/
This should allow creation of complex animations like dancing,
which consists of repeating loops and transitions to the next.
One important side effect of this is dramatically reduced
file sizes, as user no longer needs to copy paste keyframes.
Reviewed By: antoniov, mendio, pepeland
Differential Revision: https://developer.blender.org/D15052
Corrections for caret insertion & movement and deletion for text
strings that include non-precomposed diacritical marks (Unicode
combining characters).
See D15659 for more details and examples.
Differential Revision: https://developer.blender.org/D15659
Reviewed by Campbell Barton
This modifier converts any stroke (no fill strokes) into perimeter
from camera view. Also, it's possible to define an alternative
material for the outline.
There is an option to include a target object to manipulate the start
point of the strokes. The start point will be the nearest point
to the target object.
Reviewed By: mendio, frogstomp
Maniphest Tasks: T100826
Differential Revision: https://developer.blender.org/D15882
Note: Icon will be updated in T101155
This adds path guiding features into Cycles by integrating Intel's Open Path
Guiding Library. It can be enabled in the Sampling > Path Guiding panel in the
render properties.
This feature helps reduce noise in scenes where finding a path to light is
difficult for regular path tracing.
The current implementation supports guiding directional sampling decisions on
surfaces, when the material contains a least one diffuse component, and in
volumes with isotropic and anisotropic Henyey-Greenstein phase functions.
On surfaces, the guided sampling decision is proportional to the product of
the incident radiance and the normal-oriented cosine lobe and in volumes it
is proportional to the product of the incident radiance and the phase function.
The incident radiance field of a scene is learned and updated during rendering
after each per-frame rendering iteration/progression.
At the moment, path guiding is only supported by the CPU backend. Support for
GPU backends will be added in future versions of OpenPGL.
Ref T92571
Differential Revision: https://developer.blender.org/D15286
Simplifies code overall to do it inside the eval function, most of the BSDFs
already compute the dot product.
The refactoring in bsdf_principled_hair_eval() was needed to avoid a HIP
compiler bug. Cause is unclear, just changing the implementation enough
is meant to sidestep it.
Ref T92571, D15286
* Return roughness and IOR for BSDF sampling
* Add functions to query IOR and label for given BSDF
* Default IOR to 1.0 instead of 0.0 for BSDFs that don't use it
* Ensure pdf >= 0.0 in case of numerical precision issues
Ref T92571, D15286
Although rB67e23b4b2967 turned the problem more recurrent, the warning
messages in the console always appear when `BKE_fluid_cache_free_all`
is called.
This is because of a bug in `BLI_filelist_dir_contents` as this function
calls `BLI_strdupcat` instead of `BLI_join_dirfile`
NOTE: Other places in Blender avoid this problem by making sure to add
a `SEP_STR` to the end of the directory.
Differential Revision: https://developer.blender.org/D16043
- fix the source package download URL
- patch the `meson.build` file to allow the CentOS 7 meson version to be
used
- only build what we need (`wayland-scanner`), and not the libraries,
documentation, and tests.
Ref: D16074
This also reverts commit f6664217b3
"Build: temporarily disable wayland dependency".
Typo in rBa8a454287a27 (created layer on edge data instead of vertex
data).
Maniphest Tasks: T101393
Differential Revision: https://developer.blender.org/D16079
Due to (optimization) checks in in `BKE_gpencil_prepare_eval_data` &
`BKE_gpencil_update_layer_transforms`, updates were skipped if animation
reached exact identity transforms.
Now check if the matrix has changed additionally to gain proper updates.
Unsure if this is the cheapest way to check for the animated state of
layer transforms tbh, but I see similar checks elsewhere.
Fixes T101164.
Maniphest Tasks: T101164
Differential Revision: https://developer.blender.org/D16018
This is needed to ensure and up to date "wayland-scanner" is used,
as versions before 1.20.0 generate headers incompatible with
dynamic linking (WITH_GHOST_WAYLAND_DYNLOAD).
As the centos7 version of wayland is 1.15 so make this part of Blender's
dependencies on Linux.
We intend to enable Wayland for Blender 3.4 release, this is needed for
the build-bot.
Reviewed By: brecht
Ref D16074
When the GHOST back-end Blender was built with isn't supported,
Blender would crash on startup without any useful information.
This could happen when building X11 only, then running on Wayland.
Now show a list of the GHOST back-ends that were attempted and exit
with an error code instead of crashing.
The screw modifier calculated normals eagerly (whether or not the
next modifier actually used them). However, this was incorrect and
set invalid normals. It isn't necessary because they can be calculated
later anyway. The potential performance improvement isn't worth the
complexity or maintenance burden.
Fixes T101075
Differential Revision: https://developer.blender.org/D16073
This code slipped through the final review step surely caused by a faulty
merge.
Fixes T101372 Regression: World shader setup crashes Blender in rendered view
Regression introduced by rB697b447c2069bbbbaa9929aab0ea1f66ef8bf4d0
Match minimum supported versions from the WIKI [0] by raising them to:
- GCC 9.3.1
- CLANG 8.0
- MVCS 2019 (16.9.16 / 1928)
Details:
- Add CMake checks that ensure supported compiler versions early on.
- Previously GCC per-processor version checks served to exclude
`__clang__`, in some cases this has been replaced by explicitly
excluding `__clang__`. This was needed as CLANG treated some of these
flags differently to GCC, causing the build to fail.
- Remove USE_APPLE_OMP_FIX GCC-4.2 OpenMP workaround.
- Remove linking error workaround for old MSVC versions.
[0]: https://wiki.blender.org/wiki/Building_Blender
Reviewed by: brecht, LazyDodo
Ref D16068
Available on Windows and macOS, where such gestures are supported.
For Windows, disabling this option restores touchpad behavior to
match Blender 3.2.
Ref T97925
Differential Revision: https://developer.blender.org/D16005
First, there can only be one crease layer, so remove the "default name",
since apparently that's how CustomData tests for that
(see `CustomData_layertype_is_singleton`).
Second, always propagate crease data because it can be used in arbitrary
situations by geometry nodes. That also has to be done for all generic
attribute layers.
Fixes T101340, T101373
- Use const and whitespace more consistently
- Fix "Offset Valid" output only working on point domain
- Use the smallest output array that can contain the result.
- Consistent include ordering
- Use "data-block" term instead of "object" in tooltip
- Remove unnecessary call to set default output values
At the cost of slightly more boilerplate code, we can avoid the `NodeItem`
and `NodeCategory` abstractions used to build the node add menu.
This makes the menus more flexible and more obvious, which will
make them easier to extend with assets.
The identifiers for the new menu types are inconsistent with regular
class naming for backwards compatibility with the old "category"
menu naming.
Also adds an item for the "Self Object" node missed in dd5131bd70.
Differential Revision: https://developer.blender.org/D15973
This node allows access to the indices of neighboring control points
within a curve via an offset. This includes taking into consideration
curves that are cyclic.
Differential Revision: D13373
Changes:
- Use the "snap_elements" property only for operators that support snapping to geometry.
- Remove unused properties:
- "use_snap_to_same_target",
- "snap_face_nearest_steps").
- Fix property with wrong name "use_snap_selectable_only" -> "use_snap_selectable"
- Fix use of dependent property flags.
- Remove redundant initialization of variables
- Simplify `poll_propety`. Only the "use_snap_project" is not hidden.
>>! In rBc484599687ba it's said:
> These options are needed for Python tools to control snapping without requiring the tool settings to be adjusted.
If that's the case, there doesn't seem to be any need to display them in the redo panel. Therefore:
- Hide snapping properties in redo panel.
Many properties have been added that can be independent of ToolSettings. Therefore:
- Save snapping properties in the operator itself. For Redo.
Windows drivers 101.3430 fix an important GUI-related crash and it's
best to prevent users from running into it.
Linux drivers weren't affected but still had relevant gpu binary
compatibility fixes, so it makes sense to keep the min-supported version
aligned across OSes.
Add the Slider UI to pose blending. This adds a slider with percentages,
and controls for precision control and incremental control.
Reviewed By: sybren
Maniphest Tasks: T90182
Differential Revision: https://developer.blender.org/D14984
Since a8a454287a the simple case would crash:
- Add place
- Add Solidify modifier
- Set Inner Crease to something non-zero
Seems to be a mistake in the logic which was trying to access
existing custom data layer on a clean result while it is more
logical to create the layer.
Was initially reported by the studio who could not open
production files after the change.
In heavy scenes containing many hairs/curves and volumetrics
using SSBO can overwrite the binding information of the volumetric
resolve shader. This has been detected during project Heist and is
only reproducable on NVIDIA platform.
This patch adds an debug option to disable SSBOs from the command
line to replace the --debug-gpu-force-workarounds that has been
used as a workaround on the render farm. Reason is that
force workarounds will also add other limitations as well (number
of texture binds for example)
Depending on the actual platform, Blender will disable features that are
known to have a faulty implementation. Add-on developers or users don't
have the ability to check what is actually enabled.
This patch will add the ability to check for
* Compute shader support `gpu.capabilities.compute_shader_support_get()`.
* SSBO support `gpu.capabilities.shader_storage_buffer_objects_support_get()`.
* Image load/store `gpu.capabilities.shader_image_load_store_support_get()`.
Refactor of `BLF_boundbox_foreach_glyph` and simplification of its
usage by only passing translated glyph bounds to callbacks.
See D15765 for more details.
Differential Revision: https://developer.blender.org/D15765
Reviewed by Campbell Barton
Previously, all implicit inputs where stored in a centralized place.
Now the information which nodes have which implicit inputs is
stored in the nodes directly.
Previously removing elements based on a predicate was a bit cumbersome,
especially for hash tables. Now there is a new `remove_if` method in some
data structures which is similar to `std::erase_if`. We could consider adding
`blender::erase_if` in the future to more closely mimic the standard library,
but for now this is using the api design of the surrounding code is used.
Thumbnails of fonts that better show design, shapes, contents, intent,
and intended language. Previews almost every known language - living
and dead - and symbol, specialty fonts, etc.
See D12032 for more details and samples.
Differential Revision: https://developer.blender.org/D12032
Reviewed by Campbell Barton
Commit cd1631b17d fails to scale the global_font_size by UI scale in
BLF_set_default. Generally used for simple text output like statistics.
See D16053 for more details.
Differential Revision: https://developer.blender.org/D16053
Own Code
When adapting the domain of a single value virtual array, skip
allocating an array for the result and just return another single
value. Among other cases, this can help when everything is selected
in sculpt mode, moving domain interpolation from 5% of perf samples
to 0% when sculpting.
Correction of U.dpi to hold actual monitor DPI. Simplify font sizing by
omitting DPI as API argument, always using 72 internally.
See D15961 for more details.
Differential Revision: https://developer.blender.org/D15961
Reviewed by Campbell Barton
Allow our Windows Thumbnail Handler to supply thumbnails up to the
maximum 256x256 size.
Differential Revision: https://developer.blender.org/D16051
Reviewed by Ray Molenkamp
bdb5754147 neglected to add search items for node groups.
Luckily adding them is quite simple. However, if the node group is also
an asset, it will show up duplicated in the list. To resolve this we
avoid adding node groups to the list if they have already been
added as assets.
This patch replaces the existing transfer attribute node with three
nodes, "Sample Nearest Surface", "Sample Index", and "Sample Nearest".
This follows the design in T100010, allowing for new nodes like UV
sampling in the future. There is versioning so the new nodes replace
the old ones and are relinked as necessary.
The "Sample Nearest Surface" node is meant for the more complex
sampling algorithms that only work on meshes and interpolate
values inside of faces.
The new "Sample Index" just retrieves attributes from a geometry at
specific indices. It doesn't have implicit behavior like the old
transfer mode, which should make it more predictable. In order to not
change the behavior from existing files, the node has a has a "Clamp",
which is off by default for consistency with the "Field at Index" node.
The "Sample Nearest" node returns the index of the nearest element
on a geometry. It can be combined with the "Sample Index" node for
the same functionality as the old transfer node. This node can support
curves in the future.
Backwards compatibility is handled by versioning, but old versions can
not understand these nodes. The warning from 680fa8a523 should make
this explicit in 3.3 and earlier.
Differential Revision: https://developer.blender.org/D15909
Update the animation's dimensions within ffmpeg_fetchibuf in case it
has changed because of dynamic resolution (possible with WebM).
Differential Revision: https://developer.blender.org/D15842
Reviewed by Richard Antalik
The C++ vertex group data accessor returned a span with null data that
wasn't empty. Instead of adding a null check as well as the size check,
just return an empty span when there is no vertex group data.
* Improve how the extend lines collision is calculated.
* Added `S` key to switch between modes.
* Now extend factor does not disable visual aids (thi sis done with checkbox).
* Reduce the use of linked list and now memory array is used.
* Refactor Radius functions.
* Fixed bug of Radius mode when object is rotated.
* Cleanup code.
Differential Revision: https://developer.blender.org/D16022
Clamp node link curving when the link is close to horizontal to prevent
overshooting at the ends.
Reviewed By: Pablo Vazquez, Hans Goudey
Differential Revision: http://developer.blender.org/D16041
Using the attribute name semantics from T97452, this patch moves the
selection status of mesh elements from the `SELECT` of vertices, and
edges, and the `ME_FACE_SEL` of faces to generic boolean attribute
Storing this data as generic attributes can significantly simplify and
improve code, as described in T95965.
The attributes are called `.select_vert`, `.select_edge`, and
`.select_poly`. The `.` prefix means they are "UI attributes",so they
still contain original data edited by users, but they aren't meant to
be accessed procedurally by the user in arbitrary situations. They are
also be hidden in the spreadsheet and the attribute list.
Until 4.0, the attributes are still written to and read from the mesh
in the old way, so neither forward nor backward compatibility are
affected. This means memory requirements will be increased by one byte
per element when selection is used. When the flags are removed
completely, requirements will decrease.
Further notes:
* The `MVert` flag is empty at runtime now, so it can be ignored.
* `BMesh` is unchanged, otherwise the change would be much larger.
* Many tests have slightly different results, since the selection
attribute uses more generic propagation. Previously you couldn't
really rely on edit mode selections being propagated procedurally.
Now it mostly works as expected.
Similar to 2480b55f21
Ref T95965
Differential Revision: https://developer.blender.org/D15795
This is very similar to D14077. There are two differences though.
First is that vertex creases are already stored in a separate layer,
and second is that we can now completely remove use of `Mesh.cd_flag`,
since that information is now inherent to whether the layers exist.
There are two functional differences here:
* Operators are used to add and remove layers instead of a property.
* The "crease" attribute can be created and removed by geometry nodes.
The second change should make various geometry nodes slightly faster,
since the "crease" attribute was always processed before. Creases are
now interpolated generically in the CustomData API too, which should
help maintain the values across edits better.
Meshes get an `edge_creases` RNA property like the existing vertex
property, to provide more efficient access to the data in Cycles.
One test failure is expected, where different rounding between float
the old char storage means that 5 additional points are scattered in
a geometry nodes test.
Differential Revision: https://developer.blender.org/D15927
The mesh's triangulation cache is often created for other operations
besides the drawing code, but during the mesh draw cache extraction
it is recalculated on every single time. It is simpler and faster to use
the existing MLoopTri array. It can also save memory if the cache
already exists by avoiding allocating a duplicate array. For a 4 million
face quad mesh, that is already 128 MB.
Also use face normals for mesh triangulation if they aren't dirty,
which should provide a general speedup when they're both necessary.
Recently 54182e4925 made this more reliable, since the triangulation
cache is invalidated properly when the mesh is deformed.
Fixes T98073
Differential Revision: https://developer.blender.org/D15550
Similar to the other refactors from T95965, this commit moves sculpt
face sets to use a generic integer attribute named `".sculpt_face_set"`.
This makes face sets accessible in the Python API.
The attribute is not visible in the attributes list or the spreadsheet
because it is meant for internal use, though that could be an option
in the future along with other similar attributes. Currently the change
is small, but in the future this could simplify code by allowing use
of more generic attribute APIs.
Differential Revision: https://developer.blender.org/D16045
Whenever animation on nodes was transfered to/from nodegroups (grouping/
ungrouping/separating) via BKE_animdata_transfer_by_basepath, it was
possible to create new nodes with the same name (in the formerly same
path -- see report for an example of this) and animation from the
original node was still performed on them. Issue went away after save/
reload.
In order to fully update the action, a depsgraph is now performed on the
action (similar to what is done when renaming for example).
Maniphest Tasks: T101109
Differential Revision: https://developer.blender.org/D15987
Following {T54811} (and {rBbb92edd1c802}), DEG updates have been added
to the various operators. This has also been done for the layers
operators (see {rBf998bad211ae}, `ARMATURE_OT_bone_layers` has been
marked done in T54811). However, instead of `ARMATURE_OT_bone_layers`,
the update tagging actually happened for `POSE_OT_bone_layers`.
Now do this for `ARMATURE_OT_bone_layers` as well (keep it for
`POSE_OT_bone_layers`, dont think this is wrong there either).
Maniphest Tasks: T101046
Differential Revision: https://developer.blender.org/D15969
Revert part of [0] which changed logic for scaling 2D regions
when the window resize. This re-introduces T72392 which can be
fixed separately.
[0]: 6243972319
This is already the case for most CMake usage.
Although some find modules are an exception to this, as they were
originally maintained externally they use some different conventions.
Also corrected bad indentation in: intern/cycles/CMakeLists.txt
Points cannot be selected atm in editmode, this patch just shows the
selection from sculptmode in editmode.
Since the selection in sculptmode is a float, a point is considered
selected as soon as the float selection is above 0.0f.
Implementation: this piggy-back on the existing drawing via
overlay_edit_curve_point.glsl which requires a "data" VBO which holds
flags for selection (next to others such as "active" - which we also
have to take care of later).
Differential Revision: https://developer.blender.org/D16021
Also reported in blender.chat.
Corrupted files were reported after opening files with the new Mix node (rBbfa0ee13d539).
Files saved in 3.4 will not be compatible with older versions of Blender.
Opening these files in previous versions will exhibit a red undefined node.
Reviewed By: HooglyBoogly, brecht
Differential Revision: https://developer.blender.org/D16025
This is required by the Metal backend to perform flushing of temporary objective-C resources. This is implemented as a global autoreleasepool, and is to ensure consistency such that all rendering operations, whether called via events, or via main loop will be within an autoreleasepool.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D15900
For the Metal shader translation support for shader-global uniforms are remapped via macro's, and in such cases where a uniform name matches a vertex attribute name, compilation errors will occur due to this injected syntax being incompatible with the immediate code.
Also adding source-level function interface alternatives where sized arrays are passed in. These are not supported directly in Metal shading language and are instead handled as pointers. These pointers require explicit address-space qualifiers in some cases, if device/constant address space memory is passed into the function.
Ref T96261
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D15898
These implementations remove dependency on the Geometry pass by instead invoking one vertex shader instance for each expected output vertex, matching what a geometry shader would emit. Each vertex shader instance is then responsible for calculating the same output position based on its vertex_id as the logic would in the geometry shader version.
SSBO Vertex fetch enables full random-access into a vertex buffer by binding it as a read-only SSBO. This enables each instance to read neighbouring vertex data to perform contextual calculations as a geometry shader would, for cases where attribute Multiload is not supported.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D15901
MTLContext provides functionality for command encoding, binding management and graphics device management. MTLImmediate provides simple draw enablement with dynamically encoded data. These draws utilise temporary scratch buffer memory to provide minimal bandwidth overhead during workload submission.
This patch also contains empty placeholders for MTLBatch and MTLDrawList to enable testing of first pixels on-screen without failure.
The Metal API also requires access to the GHOST_Context to ensure the same pre-initialized Metal GPU device is used by the viewport. Given the explicit nature of Metal, explicit control is also needed over presentation, to ensure correct work scheduling and rendering pipeline state.
Authored by Apple: Michael Parkin-White
Ref T96261
(The diff is based on 043f59cb3b)
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D15953
Metal: MTLVertBuf implementation and support for texture creation from vertex buffers.
Authored by Apple: Michael Parkin-White
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D15452
From the nodes' description: "Retrieve the object that contains
the geometry nodes modifier currently being executed". This was
discussed in the most recent geometry nodes module meeting.
Because the node allows you to retrieve the position of the modifier
object, it has to add a depsgraph relation to object transform.
Expect that modifiers will be reevaluated when moving the object.
In the future, better static analysis of node trees could make this
check smarter.
Differential Revision: https://developer.blender.org/D16037
Now explicitly including math.h first before #defining funcitons.
This avoids undefined behavior and improves compatibility with
different SYCL compilers and backends.
In UV editor, previously unable to see grid and image at same time.
Maniphest Tasks: T78391
Differential Revision: https://developer.blender.org/D16038
The BMesh selection virtual array was empty. There are a few different
places we could add an "empty" check here, but at the top of the
function is the simplest for now.
Similar to e5a7470638, the tree currently being edited should be
used for polling and other tests, rather than the node tree at the root
of the node editor's path.
This was caused by the vertical/horizontal clasification being done in
NDC space which wasn't respecting the Aspect ratio.
Multiplying the test vector by the target size fixes the issue.
The typed "lookup_or_add_for_write_only" function is meant to do the
same thing as the non-typed version of the function. Instead, it still
initialized values of new attribute arrays, which isn't meant to happen.
Missed in 4c91c24bc7.
I also had to correct one place that used the "write_only"
function but didn't intialize all values.
I didn't observe this issue in practice, but since the write_only
version of the attribute API isn't meant to initialize trivial types,
theoretically this could be a problem if the attribute is created
halfway through converting the BMesh to a Mesh.
The BM_mesh_bm_to_me_for_eval() cal be called on the same BMesh
from multiple threads. This adds a restriction that this function
should not modify the BMesh. This started to be violated quite
madly during the generic attributes changes.
This change makes it so that the BMesh is not modified.
The code looks less functional-like, but it solves the threading
conflict.
Ideally the BMesh will be const in the function but doing it now
is a bit tricky due to the other APIs.
The repro case for the crash is a bit tricky to reproduce from
scratch. For those who has access to the Heis production repo
/pro/lib/char/pack_bot/pack_bot.blend file can be used. Simply
add loop to "GEO-leg.R" object and use bevel operator on the
new loop.
There is still some write of the element indices happening in
this function. In theory those could be removed (together with
the dirty index tag clear) but it leads to obscure crashes in
area far away from this one. I've left it unchanged for now as
on 64bit platforms those assignments should not be causing real
issues.
Differential Revision: https://developer.blender.org/D16023
Base it in an existing building blocks rather than having dedicated
structure for it.
No functional changes is expected, just preparing to make the code
more reusable.
The ID nodes will use the provided component name to maintain
the map-based storage, while the component node itself could
override the empty name with a type name.
This lead to situations when it is not possible to lookup
the operation from its owner parameters.
Make it so find type of methods receive const pointers and do not
modify graph topology.
The latter was violated in the find_operation() which could have
created an empty component. This is not intended behavior.
No functional changes is expected.
I'm adding some asset APIs/types in C++ that the file-listing code would
use. I prefer porting this code to C++ over adding a C-API for the asset
code.
Includes some minor cleanups that shouldn't change behavior, like using
`MEM_new()`/`MEM_cnew()`, C++ style C-library includes,
`LISTBASE_FOREACH()`, removing unnecessary typedefs, etc.
This functionality was present until Blender 2.80. Basically it adds back the
"+" and "-" buttons in the file browser when it stores an output filepath.
This is useful for someone rendering multiple versions of an animation (or a
composition) to compare.
At the moment this is used for the render output, and the File Output node in
the compositor.
Differential Revision: https://developer.blender.org/D15968
Sorry, this was working before I rebased. I believe the warning was
fixed and the rebase still applied.
The commit as it was introduced building problems
This reverts commit ae21319d7f.
This was used in early node based particle system development
but is not used anymore. The code also didn't match the standards
of other data structures in blenlib.
Initializing the sys.path on startup attempted to add subdirectories
of {BLENDER_SYSTEM_SCRIPTS}:
- ./modules/modules
- ./modules/startup
As the directories aren't expected to exist there is no need to add them.
Also improved comments for path searching logic.
05952aa94d modified this area incorrectly, transforming
vertices outside of the mesh. That would have been fine, but the mesh
is used to retrieve the bounding box. Instead just avoid duplicating the
positions and normals completely, and avoid using referenced layers
just to be extra safe.
Even meshes without any faces must have MPoly and MLoop layers, etc.
This caused a crash in the extrude node when the edit mesh had no faces
(see T101208). Issue with f94130c94b.
In D10241, both NodeItems for NodeGroupInput and NodeGroupOutput in the
were moved from their categories into the 'node_group_items' generator.
As the NodeItem.poll() is called by the NodeCategory class and not by
the NodeItem class, the poll functions associated with those NodeItems
were never called. This should correct that.
Differential Revision: https://developer.blender.org/D16013
Now it's possible to set an offset in the surface reprojection.
Before, this was only possible while drawing, but not in the
reproject operator.
Differential Revision: https://developer.blender.org/D15610
After the redo panel is added to animation editors in D14960, many
operators have now been adjusted to appear and function correctly.
A full list of changes is tracked in T98195.
This patch only includes actual usability fixes. It does not do any
changes for the user's convenience, like adding other helpful properties
to operators. This can be done in a follow-up patch.
Reviewed By: sybren
Maniphest Tasks: T98195
Differential Revision: https://developer.blender.org/D14977
Add the Redo panel to the dopesheet & NLA editors. This also implicitly
adds it to the timeline editor, since it's a kind of action editor
internally.
This feature is needed for changing advanced properties of animation
operators, such as select grouped (see D14811). But it can also be
useful for existing operators, like precise keyframe position tweaking.
Changes are basically the same as in D6286 (which added the redo panel
for Graph Editor).
Some operators have internal properties that should be hidden. A full
list can be found in T98195. These will be fixed in a follow-up patch.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D14960
This was missing in Blender File & Orphan Data view.
Typo in rBb5fc8f611e39.
Maniphest Tasks: T101201
Differential Revision: https://developer.blender.org/D16016
In large node setup the threading overhead was sometimes very significant.
That's especially true when most nodes do very little work.
This commit improves the scheduling by not using multi-threading in many
cases unless it's likely that it will be worth it. For more details see the comments
in `BLI_lazy_threading.hh`.
Differential Revision: https://developer.blender.org/D15976
The operator did not set the any extrapolation mode of the individual
keyframes, it sets it for the whole f-curve. Change the operator name to
reflect that.
Code from {rBb0cb0a785475} assumed a texture node `node->id` would
always be an image.
That is not true though:
- could be an object (as reported here with the Point Density node)
- could be a textblock (as in the IES Texture node)
Acting on these would crash when doing `BKE_image_signal` on them.
Now check node id is an image and do nothing otherwise.
Also check if an image is actually set in these nodes (if none is, the
Image Editor is now also untouched, previously the image in the Image
Editor was "cleared" here [set to NULL] -- which does not seems very
beneficial)
Maniphest Tasks: T101001
Differential Revision: https://developer.blender.org/D15943
Since D15885, most (all?) python based importers are failing with an
error like RuntimeError: Error: Object 'Cube' can't be selected
because it is not in View Layer, whenever they try to mark
just-created objects selected via obj.select_set(True). Happens at
least in FBX and (legacy) OBJ importers -- effectively they end up
creating just the first imported object before failing with this
exception.
Looks like BKE_view_layer_synced_ensure calls were missing before
BKE_view_layer_base_find in rna_object_api.c.
Reviewed By: Campbell Barton
Differential Revision: https://developer.blender.org/D16004
Currently the rake rotation is calculated when the angle mode is set. Even when the texture isn't valid.
This change will only calculate the rake rotation when the texture is valid and the angle mode is set.
For example, allows a custom UV grid size of 4 x 12.
TODO: Fix snapping with custom UV grid sizes.
Manifest Tasks: T78391
Differential Revision: https://developer.blender.org/D16000
Currently node group assets are supported, but using them by dragging
from the asset browser is cumbersome. This patch adds all node group
assets from user asset libraries and the current file libraries to the
add node search menu and the link drag search menu.
Node groups added through the search will have their "options" hidden,
meaning the data-block selector is displayed. This helps keep the UI
clean, and the selector shouldn't be necessary anyway.
To make that possible, metadata like the node tree type and its inputs
and outputs has to be saved in the file. This requires re-saving the
files that contain the assets with the patch applied.
The node add search operator is moved from Python to C++ to ease
development and allow more flexibility. It supports a tooltip that
gives the description of assets.
Currently the node groups are added with the asset system's existing
"Append & Reuse" behavior. It's likely that linking should be possible
in the future too, but for now the idea is to use the more foolproof
option that doesn't create dependencies between files.
Because loading assets can potentially take a long time, the search
menu refreshes its items as new assets are loaded. However, changing
the search field is necessary to see the update.
Differential Revision: https://developer.blender.org/D15568
This commit adds a node to distribute points inside of volume grids.
The "Random" mode usese OpenVDB's "point scatter" implementation, and
there is also a "Grid" mode for uniform distributions. Both methods
operate on all of the float grids in the volume, using every voxel with
a value higher than the threshold. The random method is not stable as
the input volume deforms.
Based on a patch by Angus Stanton (@abstanton), which was based on a
patch by Kenzie (@kenziemac130).
Differential Revision: https://developer.blender.org/D15375
Before, the lines could be extended endless, but this added too noise.
Now, the lines are not extended more if collide.
Before:
{F13504186}
After:
{F13504187}
Reviewed By: mendio, frogstomp
Differential Revision: https://developer.blender.org/D15992
This simplifies python code.
When we call a method like shader.uniform_float("color", (1,1,1,1)),
we expect the shader's uniform to be updated regardless of whether the
shader is bound or not.
And `batch.draw()` already calls `GPU_shader_bind` inside.
Differential Revision: https://developer.blender.org/D15929
Check modifier keys using XKB_STATE_MODS_DEPRESSED which is used
to check if modifiers are physically held. In practice it's unlikely
this would have caused an error for key-maps in common use.
In `BKE_mesh_tag_coords_changed_uniformly` the checks for dirty vertex
and dirty poly normals were swapped around, causing an assert to be
triggered.
Differential Revision: https://developer.blender.org/D16002
`CurveEval` was added for the first iteration of geometry nodes curve
support. Since then, it has been replaced by the new `Curves` type
which is designed to be much faster for many curves and better
integrated with the rest of Blender. Now that all curve nodes have
been moved to use `Curves` (T95443), the type can be removed,
along with the corresponding geometry component.
This is the last node to use the `CurveEval` type. Since the curve to
points node is basically the same as the resample node, now it just
reuses the resample code and moves the curve point `CustomData` to a
new point cloud at the end. I had to add support for sampling tangents
and normals to the resampling.
There is one behavior change: If the radius attribute doesn't exist,
the node won't set the radius to 1 for the output point cloud anymore.
Instead, the default radius for point clouds will be used.
That issue was similar to T99814.
Differential Revision: https://developer.blender.org/D16008
Fix clipping artifacts of node drop shadows that could occur
on hidden nodes, when using higher UI scaling.
Reviewed By: Hans Goudey
Differential Revision: http://developer.blender.org/D16007
The node position is specified in the coordinate space of the node
editor. The cursor position has to be divided by `UI_DPI_FAC` since it's
in view space but the offset is independent of any ui scaling.
Reviewed By: Hans Goudey
Differential Revision: http://developer.blender.org/D16006
With the recent addition of the UV unwrapping node, there is a need to
be able to create seams easily. This node does that by outputting a
selection of the boundaries between different input face sets. In the
context of UV mapping, one inputs the "patches" you want, and the node
gives you the seams needed to make those patches.
Differential Revision: https://developer.blender.org/D15423
Add new functions to `array_utils` namespace called `gather(..)`.
Versions of `GVArray::materialize_compressed_to_uninitialized(..)` with
threading have been reimplemented locally in multiple geometry node
contexts. The purpose of this patch is therefore to:
* Assemble these implementations in a single file.
* Provide a naming convention that is easier to recognize.
Differential Revision: https://developer.blender.org/D15786
Correct interpolation of integer POD types for Catmull Rom
interpolation as implemented in eaf416693d.
**Problem description**
`attribute_math::DefaultMixer<T>::mix_in()` assumes/asserts positive
weights but the basis function for Catmull-Rom splines generates
negative weights (see image in revision). Passing negative weights will
yield correct result as sum(weights) = 1 (after multiplication by 0.5)
but the assert is still triggered in debug builds. This patch adjusts
the behavior by extending the mix functions with mix4(). The benefit
of using mix#() over a DefaultMixer is that the result no longer needs
to be divided by the weight sum, instead utilizing that the basis weight
sum is constant (see plot).
**Changes**
* Added mix4() and updated catmull_rom::interpolate() to use it.
* Removed TODOs from catmull_rom functions.
* Moved mix definitions to be ordered as 2, 3, 4 in the header.
**Implementation specifics**
`catmull_rom::interpolate()` uses a constexpr to differentiate between
POD types which multiplies the result with 0.5 after weighting the
values, this reduces the number of multiplications for 1D, 2D, 3D
vectors (https://godbolt.org/z/8M1z9Pxx6). While this could be
considered unnecessary, I didn't want to change the original behavior
as it could influence performance (did not measure performance here
as this should ensure the logic is ~identical for FP types).
Differential Revision: https://developer.blender.org/D15997
While this worked, the result for curves with a resolution of zero was
just a single evaluated point, which isn't useful or intuitive. Using
the attribute validation from 8934f00ac5, make sure users
can't set values 0 or less.
This option allows easier setup of intersection overrides on more
complex scene structures. Setting force intersection would allow objects
to always produce intersection lines even against no-intersection ones.
Reviewed By: Aleš Jelovčan (frogstomp) Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D15978
Holding the OS (Windows) key on Win32 used key-repeat behavior.
While as far as I know it didn't cause user visible errors - sending
repeated modifier events isn't expected behavior and doesn't happen
on other platforms (or for other modifier keys).
Handling the OS key now match other modifiers in GHOST which detect
each key separately, making the behavior simpler to reason about since
mapping a single key to a modifier state is simpler, avoiding handling
that only applied to the OS-Key.
This means simulating key up/down events can use the correct modifier.
In the window-manager this is still only accessed accessed via KM_OSKEY.
We expect some builtin attributes to have positive values or values
within a certain range, but currently there some cases where users
can set attributes to arbitrary values: the store named attribute node,
and the output attributes of the geometry nodes modifier. The set
material index node also needs validation.
This patch adds an `AttributeValidator` to the attribute API, which
can be used to correct values from these untrusted inputs if necessary.
As an alternative to D15548, this approach makes it much easier to
understand when validation is being applied, without the need to add
arguments to every attribute API method or complicate the virtual
array system.
Currently validation is provided with a multi-function. That integrates
well with the field evaluations that set these values now, but it could
be wrapped to be friendlier to other areas of Blender in the future.
The Python API is not handled here either. Currently I would prefer to
wait until we can integrate the C++ and C attribute APIs better before
addressing that.
Fixes T100952
Differential Revision: https://developer.blender.org/D15990
writefile.cc includes BLI_winstuff.h which
includes Windows.h which supplies definitions
of min/max that conflict with the c++ headers
previously windows.h was only included when TBB was
enabled, the inclusion of BLI_winstuff.h now
makes this define mandatory for all configurations
Previously the a simulated event was sent for releasing modifiers
on activation but pressing only set the eventstate flag.
Prefer the simulated events since press/release events are used in some
modal key-maps.
This bug was caused by the weird ownership logic for render results.
Basically, the most recent render result is owned by the Render, while
all others are owned by the RenderSlots.
When a new render is started, the previous Render is handed over to its
slot, and the new slot is cleared. So far, so good.
However, when a slot is removed and happens to be the one with the most
recent render, this causes a complication.
The code handles this by making another slot the most recent one, along
with moving its result back to the Render, as if that had always been
the most recent one.
That works, unless there is no most recent render because you haven't
rendered anything yet. Unfortunately, there is no way to store "there
hasn't been a render yet", so the code still tries to perform this
handover but can't.
Previously, the code handled that case by just refusing to delete the
slot. However, this blocks users from deleting this slot.
But of course, if there hasn't been a render yet, the slots will not
contain anything yet, so this entire maneuver is pointless.
Therefore, the fix for the bug is to just skip it altogether if there
is no Render instead of failing the operation.
Technically, there is a weird corner case remaining, because Renders
are per-scene. Therefore, if a user renders images in one scene,
switches to a different scene, deletes a slot there and then switches
back, in some situations the result in the deleted slot might end up
in the next slot.
Unfortunately this is just a limitation of the weird split ownership
logic and can't just be worked around. The proper fix for this
probably would be to hand over ownership of the result from the Render
to the RenderSlot once the render is done, but this is quite complex.
Also fixes a crash when iuser->scene is NULL.
This value was used to close gaps, but now with the new system is not needed.
Internally, still we need to keep a small leak size, but after doing a lot of test a
value of 3 is perfect, so it's harcoded.
To avoid too much noise, the help circles are only visible if the
the gap is still open. When the gap is closed, the circles are hidden.
Hiding the circles makes it easier to focus on what is problematic.
instead, to see many circles that are already resolved.
The motivation for this change: while working on an animation recently, I found that there are some gaps that won't close easily via stroke extension or leak size checking. In D14698, I attempted to address this by changing the algorithm of the raster-space flood fill. This patch attempts to address the same issue in vector space by adding two new cases where stroke extensions are added, as suggested by @frogstomp:
# **Points of high curvature:** when the curvature at a point is high enough that it's hard to visually distinguish between it and an endpoint, add a stroke extension out along the normal (pointing in the opposite direction of the stroke's acceleration.) This addresses cases where technically the endpoint points up, but there's a sharp corner right below it that should extend to connect.
# **Stroke endpoints within a radius**: when two endpoints are close together, regardless of the angle they make, connect them if they are within a radius. This addresses cases like where the two endpoints have effectively parallel tangents, so extensions won't close the gap.
Reviewed By: antoniov, mendio, frogstomp
Differential Revision: https://developer.blender.org/D14809
Returns a new range, that contains the intersection of the current one
with the given range.
This is helpful to select a portion of a range without having to deal with
all the asserts of other functions. The resulting range being always a
valid subrange, it can be used to iterate or copy a part of a vector.
This reduces logging overhead. The performance difference is only
significant when there are many fast nodes. In my test file with many
math nodes, the performance improved from 720ms to 630ms.
Caused by clamping handle translation to strip bounds in functions
`SEQ_time_*_handle_frame_set()` to prevent strip ending in invalid
state. Issue happens when meta strip is moved so quickly, such that
immediate offset is greater than strip length.
Currently meta strip bounds are updated when any contained strip changes
its position, but this update always preserves meta strip position.
Transforming meta strip is not possible directly and all contained
strips are moved instead. Therefore this is 2-step process and fix needs
to be applied on update function and on translation function.
Inline offset handling without clamping in function
`SEQ_time_update_meta_strip_range()`.
Add new function `seq_time_translate_handles()` to move both handles at
once in `SEQ_transform_translate_sequence()`.
Avoid conversion to `BMesh` for basic topology operations and data access.
Instead use a mesh map to retrieve the faces connected to each edge.
I observed performance improvements of 5x (600ms to 100ms) to 10x
(15s to 1s), with bigger changes for large meshes with more data layers
Switching to `std::queue` over Blender's `GSQueue` gave another
25% improvement.
Differential Revision: https://developer.blender.org/D15988
Caused by ee23f0f3fb, which removed the update tag when entering
sculpt mode, and by b5f7af31d6, which made these layers lazily
created, so they weren't always available at the start of a stroke. Now
update the evaluated mesh/multires CCG as necessary. Some updates
could potentially avoided when switching modes in the future, but for
now do it all the time.
Fixes T101116
Also fixes a crash when painting multires mask for the first time
New unified attribute API for sculpt code.
= Basic Design =
The sculpt attribute API can create temporary or permanent attributes (only supported in `PBVH_FACES` mode). Attributes are created via `BKE_sculpt_attribute_ensure.`
Attributes can be explicit CustomData attributes or simple array-based pseudo-attributes (this is useful for PBVH_GRIDS and PBVH_BMESH).
== `SculptAttributePointers` ==
There is a structure in `SculptSession` for convenience attribute pointers, `ss->attrs`. Standard attributes should assign these; the attribute API will automatically clear them when the associated attributes are released. For example, the automasking code stores its factor attribute layer in `ss->attrs.automasking_factor`.
== Naming ==
Temporary attributes should use the SCULPT_ATTRIBUTE_NAME macro for naming, it takes an entry in `SculptAttributePointers` and builds a layer name.
== `SculptAttribute` ==
Attributes are referenced by a special `SculptAttribute` structure, which holds
all the info needed to look up elements of an attribute at run time.
All of these structures live in a preallocated flat array in `SculptSession`, `ss->temp_attributes`. This is extremely important. Since any change to the `CustomData` layout can in principle invalidate every extant `SculptAttribute`, having them all in one block of memory whose location doesn't change allows us to update them transparently.
This makes for much simpler code and eliminates bugs. To see why this is tricky to get right, imagine we want to create three attributes in PBVH_BMESH mode and we provide our own `SculptAttribute` structs for the API to fill in. Each new layer will invalidate the `CustomData` block offsets in the prior one, leading to memory corruption.
Reviewed by: Brecht Van Lommel
Differential Revision: https://developer.blender.org/D15496
Ref D15496
The new evaluator crashes for multi-input sockets coming from undefined
nodes. The multi-input socket lazy node tries to retrieve the default
value since the undefined node never created output values. But there
is no default value stored because the socket is linked.
Differential Revision: https://developer.blender.org/D15980
Smooth flag should come from the evaluated mesh, only selection and hidding
state should be mapped to the original bmesh.
Pre-existing issue revealed by refactor in b247588dc0.
This was essentially a use-after-free issue. When a geometry nodes
group changes it has to be preprocessed again before it can be evaluated.
This part was working, the issue was that parent node groups have to be
preprocessed as well, which was missing. The lazy-function graph cached
on the parent node group was still referencing data that was freed when
the child group changed.
Now the depsgraph makes sure that all relevant geometry node groups are
preprocessed again after a change.
This issue was found by Simon Thommes.
Sun Disc is currently not supported because it'll need special handling - on the one hand, I'm not sure if Eevee would handle a 1e6 coming out of a background shader without issues, and on the other hand it won't actually cast sharp shadows anyways.
I guess we'd want to internally add a sun to the lamps if Sun Disc is enabled, but getting that right is tricky since the user could e.g. swap RGB channels in the node tree and the lamp wouldn't match that.
Anyways, that can be handled later, the sky itself is already a start.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D13522
This reverts commit 34051fcc12.
Although for normal use this doesn't make a difference. But when working with
huge scenes and volumetrics + NVIDIA it made a work-around not possible anymore.
For the heist production we added a fix on the render-farm (enable GPU workarounds).
{rB34051fcc12f388375697dcfc6da53e9909058fe1} made another work-around not
accessible anymore and it and was requested to revert this change.
When an operator is attached to a file select dialog, the update
callback function for the operator's directory, filename and filepath
properties will be called as the user navigates through the dialog.
This will allow add-on authors to make more interactive import
operators.
Differential Revision: https://developer.blender.org/D15543
Different areas of the mesh can be "loose parts" visually when separated
by hidden areas. This is consistent with other areas of sculpt mode that
also treat hidden areas differently.
- Add doc-string with example usage shown in the --help message.
- Add help text for command line arguments.
- Only search for the CMakeCache.txt file when the `--build-dir`
is omitted.
- Write fatal errors to the stderr.
We need to use the custom data copy function that skips mesh-only
attributes like the hide status attributes, the generic material index
attribute, etc. Otherwise the BMesh has those attributes which
conflict with their builtin counterparts.
The buildbot will call this script to create a binary .whl file that can be
easily installed through pip.
This wheel will only work with the same Python version used for Blender.
Other minimum system requirements are the same as regular Blender builds.
Includes contributions by Campbell Barton.
Differential Revision: https://developer.blender.org/D15957
* Use Python executable from lib folder since it's not installed.
* Make bpy module test work for portable install.
* Disable gtests which don't work with different Python link flags
and shared library locations.
Ref D15957
This adds a utility function to copy the data from a PointCloud
outside of the main database to one that is in the database. This
is similar to `BKE_mesh_nomain_to_mesh`.
Ref D11592
The default trace can only trace an image or a sequence, but
it was not possible to trace only selected frames in a sequence.
This new parameter allows to define what frame trace.
If the value is 0, the trace is done as before.
The parameter is not exposed in the UI because this is logic
if it is managed by a python API, but it has no sense in the UI.
This feature was included after receiving feedback from Studios
which need to trace videos only for some frames using custom
python scripts.
In the NLA, draw the track background based on the strip's extrapolation
setting. Previously, this had no visual indicator; "Hold", "Hold
Forward", and "Nothing" were visually indistinguishable. Now "Nothing"
actually shows nothing, "Hold Forward" shows a dimly colored background
from the strip to its right, and "Hold" shows that in both directions.
Reviewed By: RiggingDojo, sybren
Maniphest Tasks: T97572
Differential Revision: https://developer.blender.org/D14836
Calculate a tangent per loop, apply the transformation in multiple
spaces and accumulate the result weighting by the loop-angle.
Note that previously only the tangents Z axis (normal)
was properly accumulated, the X and Y axes only contained the values
from a single loop (the last one written to), meaning only two edges
contributed to the result. Now the transformation from all loops are
taken into account.
In practice the difference between both methods is minimal,
only for more extreme bending it can be noticed which is often when the
previous method didn't work as well.
The side-bar included both title and description for documentation
pages including quickstart, tips & tricks .. etc.
Titles often wrapped and took up a lot of vertical space in the side-bar.
Now these pages are linked on the main page, with the side-bar
used for top-level Python modules.
When moving strip, or it's handle, text with frame number near handle
should be drawn. This feature was broken by 8d53ead69b, because
function `UI_view2d_text_cache_add` sets all fields of `v2s->rect` to 0.
This case was checked in function `UI_view2d_text_cache_draw`, but it
was not quite obvious.
This commit reverts 8d53ead69b, makes condition for 0 size rectangle
more obvious and adds comment for clarity.
function `UI_view2d_text_cache_add` is only used in NLA and VSE, and
this new condition fits existing use-cases. Status of T97500 is not
affected by this change.
This patch adds color_srgb property to FloatColorAttributeValue and
ByteColorAttributeValue, so Python code can do
`layer.data.foreach_get("color_srgb", ...)` to fetch the data
efficiently, if it needs it in sRGB color space.
Reviewed By: Bastien Montagne
Differential Revision: https://developer.blender.org/D15966
Whether faces are hidden and face sets are orthogonal concepts, but
currently sculpt mode stores them together in the face set array.
This means that if anything is hidden, there must be face sets,
and if there are face sets, we have to keep track of what is hidden.
In other words, it adds a bunch of redundant work and state tracking.
On the user level it's nice that face sets and hiding are consistent,
but we don't need to store them together to accomplish that.
This commit uses the `".hide_poly"` attribute from rB2480b55f216c to
read and change hiding in sculpt mode. Face sets don't need to be
negative anymore, and a bunch of "face set <-> hide status" conversion
can be removed. Plus some other benefits:
- We don't need to allocate either array quite as much.
- The hide status can be read from 1/4 the memory as face sets.
- Updates when entering or exiting sculpt mode can be removed.
- More opportunities for early-outs when nothing is hidden.
- Separating concerns makes sculpt code more obvious.
- It will be easier to convert face sets into a generic int attribute.
Differential Revision: https://developer.blender.org/D15950
When a change happens which invalidates view layers the syncing will be postponed until the first usage.
This will improve importing or adding many objects in a single operation/script.
`BKE_view_layer_need_resync_tag` is used to tag the view layer to be out of sync. Before accessing
`BKE_view_layer_active_base_get`, `BKE_view_layer_active_object_get`, `BKE_view_layer_active_collection`
or `BKE_view_layer_object_bases` the caller should call `BKE_view_layer_synced_ensure`.
Having two functions ensures that partial syncing could be added as smaller patches in the future. Tagging a
view layer out of sync could be replaced with a partial sync. Eventually the number of full resyncs could be
reduced. After all tagging has been replaced with partial syncs the ensure_sync could be phased out.
This patch has been added to discuss the details and consequences of the current approach. For clarity
the call to BKE_view_layer_ensure_sync is placed close to the getters.
In the future this could be placed in more strategical places to reduce the number of calls or improve
performance. Finding those strategical places isn't that clear. When multiple operations are grouped
in a single script you might want to always check for resync.
Some areas found that can be improved. This list isn't complete.
These areas aren't addressed by this patch as these changes would be hard to detect to the reviewer.
The idea is to add changes to these areas as a separate patch. It might be that the initial commit would reduce
performance compared to master, but will be fixed by the additional patches.
**Object duplication**
During object duplication the syncing is temporarily disabled. With this patch this isn't useful as when disabled
the view_layer is accessed to locate bases. This can be improved by first locating the source bases, then duplicate
and sync and locate the new bases. Will be solved in a separate patch for clarity reasons ({D15886}).
**Object add**
`BKE_object_add` not only adds a new object, but also selects and activates the new base. This requires the
view_layer to be resynced. Some callers reverse the selection and activation (See `get_new_constraint_target`).
We should make the selection and activation optional. This would make it possible to add multiple objects
without having to resync per object.
**Postpone Activate Base**
Setting the basact is done in many locations. They follow a rule as after an action find the base and set
the basact. Finding the base could require a resync. The idea is to store in the view_layer the object which
base will be set in the basact during the next sync, reducing the times resyncing needs to happen.
Reviewed By: mont29
Maniphest Tasks: T73411
Differential Revision: https://developer.blender.org/D15885
Related to {D15885} that requires scene parameter
to be added in many places. To speed up the review process
the adding of the scene parameter was added in a separate
patch.
Reviewed By: mont29
Maniphest Tasks: T73411
Differential Revision: https://developer.blender.org/D15930
Replace incorrect usage of GLYPH_ASCII_TABLE_SIZE with correct
KERNING_CACHE_TABLE_SIZE
See D15815 for more details.
Differential Revision: https://developer.blender.org/D15815
Own Code.
Converting to the SoA format (T95965) immediately when reading meshes
means that none of the changes from versioning would be applied first.
This means important fixes like f14995aba7 aren't properly applied,
so modifications could be done to invalid CustomData. To fix this, move
the SoA changes into versioning code, in a new versioning_400.cc file.
Differential Revision: https://developer.blender.org/D15919
The snake hook and grow/shrink brushes need some arrays for input
to the length paramterization code. These were allocated and freed
for every curve. Instead, use a local buffer for each task execution.
Differential Revision: https://developer.blender.org/D15964
A "lookup_int" callback needs to be provided for RNA collections
that aren't backed by DNA directly. Otherwise they will iterate from
the start of the array for every access.
We now import and apply custom normals using a similar strategy
to the STL importer. We store custom normal data for each loop
as we read each MPoly and then apply it to the mesh after
`BKE_mesh_calc_edges()` is called.
The new behavior is optional and may be disabled in the Collada import
UI. When disabled, we use the old behavior of only using normals
to determine whether or not to smooth shade an MPoly.
----
Patch as requested in {T49814}.
The Collada import UI now has an additional checkbox, similar to the glTF and FBX import UIs:
{F13428264}
Here is a test Collada file with a simple test cube with flipped custom normals:
{F13428260}
{F13428282}
And a sphere where the two halves are disconnected geometry, but has custom normals that make the halves appear to be connected:
{F13436363}
{F13436368}
I've tested it on a number of my own meshes, and the custom normals appear to be imported
correctly. I'm not too sure about how I've plumbed the option down, though, or whether this
is the most proper way to apply custom normals.
Reviewed By: gaiaclary
Differential Revision: https://developer.blender.org/D15804
The memory leak happens because `ED_node_link_insert` (called after the
transform operation) overwrites the pre-existing `snode->runtime->iofsd`,
losing the reference without freeing the memory.
So to "move" the reference from `snode->runtime->iofsd` to
`op->customdata`, so that each operator works with its own data.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D15948
When assigning a huge number of materials, like when importing thousands of
objects, the function `BKE_objects_materials_test_all` uses quite a lot of
resources because of the way it loops through all objects to resize the
mat-array.
By counting the amount of processed objects and comparing to the number
of users of the obdata ID, we can exit early and avoid looping through
all objects every time.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15740
Calling operators in background-mode always printed with the
assumption that output should never be hidden.
However operators called from `bpy.ops` were also printing reports to
the `stdout` (needed for the Python console and generally useful).
Resolve by adding a flag to signal that the owner of the ReportList
is responsible for printing to the `stdout`.
This adds back the new mix node to the Color sections
of the add node menu.
The add menu now contains two entries for the mix node.
One under Utilites/Converter which defaults for float.
One under Color which defaults to color with `Mix Color` label.
This was moved as part of D13749.
The issue was reported on BlenderArtists.
Differential Revision: https://developer.blender.org/D15887
Some files have 2 different framerates stored in metadata. Use function
`av_guess_frame_rate` to get media FPS, because it provides more
consistent / correct values across multiple files.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D15839
`MPoly` is used and copied in many places. To avoid the need to use a
special function for copying MPoly, or the need to add a copy
constructor, just rename the `mat_nr` field to include "legacy" in the
name. This keeps the original purpose of notifying developers that
the field shouldn't be used without any further complexity.
Apply the same fix to `bweight`.
Differential Revision: https://developer.blender.org/D15841
The trim functionality is implemented in the geometry module, and
generalized a bit to be potentially useful for bisecting in the future.
The implementation is based on a helper type called `IndexRangeCyclic`
which allows iteration over all control points between two points on a
curve.
Catmull Rom curves are now supported-- trimmed without resampling first.
However, maintaining the exact shape is not possible. NURBS splines are
still converted to polylines using the evaluated curve concept.
Performance is equivalent or faster then a 3.1 build with regards to
node timings. Compared to 3.3 and 3.2, it's easy to observe test cases
where the node is at least 3 or 4 times faster.
Differential Revision: https://developer.blender.org/D14481
The internal state tracking is not fully suited for such kind
of optimization yet.
It is probably not that much work to make them work, but the
issue caused by the changes is serious enough for the studio
so it feels better to revert changes for now and have a closer
look into remaining issues without pressure.
Caused by b5f7af31d6, which exposed the fact that the PBVH wasn't
retrieving the updated hide status attributes if they were allocated in
sculpt mode. Previously the attributes were always allocated when
entering sculpt mode.
Removes the "Edited Action" tab for selected Action strips in the NLA
editor. It is still available in the Action editor, where it is actually
suitable/usable. Having it in the NLA got in the way of the actual NLA
strip properties.
Reviewed By: sybren, RiggingDojo
Differential Revision: https://developer.blender.org/D14964
On NVIDIA volumetric resolve failed for large production scenes.
The result would remove most color from the final render. The cause
seems to be a faulty driver.
This change ported the fragment shader to a compute shader which
would select a different compiler branch and didn't show the error.
Animators were not able to set channel interpolation or easing type for
channels visible in the dopesheet but hidden in the graph editor.
Bug seemed to be due to typo.
No official report, but there was a RCS on this
https://blender.community/c/rightclickselect/yWgbbc/
Reviewed By: sybren, RiggingDojo
Differential Revision: https://developer.blender.org/D10228
Implement import & export support for "PBR extensions" in .mtl files
(T101029, also fixes T86736).
Newly supported parameters:
- Roughness (Pr, map_Pr)
- Metallic (Pm, map_Pm)
- Sheen (Ps, map_Ps)
- Clearcoat thickness (Pc) and roughness (Pcr)
- Anisotropy (aniso) and rotation (anisor)
- Transmittance (Tf / Kt)
Exporter has an option to enable these additional PBR parameters
export; defaults to off since not all software understands that.
Exporter UI tweaked and all material-related options were put into
their own separate box.
Added/extended test files in Subversion repository for test coverage.
This change adds cryptomatte render passes to EEVEE-Next. Due to the upcoming viewport
compositor we also improved cryptomatte so it will be real-time. This also allows viewing
the cryptomatte passes in the viewport directly.
{F13482749}
A surface shader would store any active cryptomatte layer to a texture. Object hash is stored
as R, Asset hash as G and Material hash as B. Hashes are only calculated when the cryptomatte
layer is active to reduce any unneeded work.
During film accumulation the hashes are separated and stored in a texture array that matches
the cryptomatte standard. For the real-time use case sorting is skipped. For final rendering
the samples are sorted and normalized.
NOTE: Eventually we should also do sample normalization in the viewport in order to extract the correct
mask when using the viewport compositor.
Reviewed By: fclem
Maniphest Tasks: T99390
Differential Revision: https://developer.blender.org/D15753
A regression since ac20970bc2
The issue was caused by depsgraph clearing all id->recalc flags
wrongly assuming that all IDs are fully evaluated.
This change makes it so the depsgraph becomes aware of possibly
incompletely evaluated IDs.
Differential Revision: https://developer.blender.org/D15946
Cleans up the file structure to be more similar to that of the SVM
and also makes it possible to build kernels with OSL support, but
without having to include SVM support.
This patch was split from D15902.
Differential Revision: https://developer.blender.org/D15949
Additionally, just stick to a pure error stating. Such messages
are aimed for developers and it is rather implied that oneAPI
rendering will be disabled.
A continuation of previous fix for malloc hooks which got removed
from the new glibc library.
The pre-compiled jemalloc has definitions which interpose hooks
in glibc leading to linking errors with multiple hook definitions.
A simple fix is to skip doing the workaround when using jemalloc
from pre-compiled libraries.
This will likely be revisited in the future, but for now it is
important to fix compilation errors for developers.
This refactors the geometry nodes evaluation system. No changes for the
user are expected. At a high level the goals are:
* Support using geometry nodes outside of the geometry nodes modifier.
* Support using the evaluator infrastructure for other purposes like field evaluation.
* Support more nodes, especially when many of them are disabled behind switch nodes.
* Support doing preprocessing on node groups.
For more details see T98492.
There are fairly detailed comments in the code, but here is a high level overview
for how it works now:
* There is a new "lazy-function" system. It is similar in spirit to the multi-function
system but with different goals. Instead of optimizing throughput for highly
parallelizable work, this system is designed to compute only the data that is actually
necessary. What data is necessary can be determined dynamically during evaluation.
Many lazy-functions can be composed in a graph to form a new lazy-function, which can
again be used in a graph etc.
* Each geometry node group is converted into a lazy-function graph prior to evaluation.
To evaluate geometry nodes, one then just has to evaluate that graph. Node groups are
no longer inlined into their parents.
Next steps for the evaluation system is to reduce the use of threads in some situations
to avoid overhead. Many small node groups don't benefit from multi-threading at all.
This is much easier to do now because not everything has to be inlined in one huge
node tree anymore.
Differential Revision: https://developer.blender.org/D15914
Since this was added, Linux libraries have been included in `../lib/`.
This made `make bpy` on Linux install the `bpy` module into the bundled
SVN libraries which isn't very useful.
Now leave WITH_INSTALL_PORTABLE unset (defaulting to ON).
Python developers may reference their systems Python and disable the
option if they wish for a system-wide module installation.
As portable is already the default, setting it meant using the lite
configuration would always reset the value if was intentionally changed.
This was also inconsistent as other configurations left this unset.
This was a kind of "lite" target, disabling options such as FFMPEG and
ALEMBIC which may be useful to read/write data from the Python module.
Now fewer options have been changed.
The following options are now disabled:
- Audio support (to prevent audio devices being initialized on startup).
- Input device support such as NDOF and IME as there is no GUI.
- Blender thumbnail extraction as it's not installed as part of
the Python module.
Instead of attempting to predict what is useful to enable when building
as a Python module, developers can mix combine options e.g.
"make bpy release" or "make bpy lite".
This makes the NLA_OT_actionclip_add operation (Shift+A while mousing
over the NLA strips area) fail on invocation if no tracks are active.
This stops the annoyance of using the Shift+A menu to select an action
to add, but only getting the error after you select an action.
Differential Revision: https://developer.blender.org/D15737
The pre-processor blocks contained un-balanced braces, causing a syntax
error when building with WAYLAND but not X11.
Use the same number of opening & closing braces in each pre-processor
block so changes aren't as likely to break other platforms.
Also assert when unexpected states are reached.
Fix error and warnings introduced in commit 8851790dd7. Include
unistd.h for close() on Non-Windows OSs. Calm warnings about unused
argument. Return full size of image file to caller.
Own Code.
Thumbnail WebP images quicker while using much less RAM.
See D15908 for more details.
Differential Revision: https://developer.blender.org/D15908
Reviewed by Brecht Van Lommel
When there was only a single material assigned to the mesh, the material
index attribute didn't necessarily exist. Changing the oder of the slots
wouldn't change the first material index as necessary.
The members were named after .mtl file syntax ("d") instead of their
meaning ("alpha"). In preparation for extending OBJ code for more
PBR parameters support, rename them for clarity. No functionality
changes, just a pure rename.
corresponding data layers and using their values for computations.
Avoiding that should increase performance in many operations that
would otherwise have to read, write, or propagate these values.
It also means decreased memory usage-- not just for sculpt mode
but for any mesh that was in sculpt mode. Previously the mask, face set,
and hide status layers were *always* allocated by sculpt mode.
Here are a few basic tests when masking and face sets are not used:
| Test | Before | After |
| Subsurf Modifier | 148 ms | 126 ms |
| Sculpt Overlay Extraction | 24 ms every redraw | 0 ms |
| Memory usage | 252 MB | 236 MB |
I wouldn't expect any difference when they are used though.
The code changes are mostly just making sculpt features safe for when
the layers aren't stored, and some changes to the conversion to and
from the hide layers. Use of the ".hide_poly" attribute replaces testing
whether face sets are negative in many places.
Differential Revision: https://developer.blender.org/D15937
sculpt_update_object now auto-creates a CD_MDISPS layer
if missing. Note that it is possible for the depsgraph
to provide a multires ccg context without a CD_MDISPS.
This causes a PBVH_GRIDS pbvh to be built instead of
falling back to PBVH_FACES, which is why this bug happens
(of course falling back to PBVH_FACES would still be a bug).
These changes were implemented by Sonny Campbell.
Fixed the first issue by freeing the operator customdata when the import
is cancelled.
Fixed the second issue by using a character array instead of allocating
new memory for the prim_path_mask.
Differential Revision: https://developer.blender.org/D15781
When resizing mesh and curves attribute storage, avoid initializing the
new memory for basic types. Also, avoid skipping "no free" layers; all
layers should be reallocated to the new size since they may be accessed.
The semantics introduced in 25237d2625 are essential for this
change, because otherwise we don't have a way to construct non-trivial
types in the new memory.
In a basic test of the extrude node, I observed a performance
improvement of about 30%, from 55ms to 42ms.
Differential Revision: https://developer.blender.org/D15818
Generally we don't want to do per-element operations on these spans
because of the overhead of the runtime type system, but these operations
on the whole span avoid ugly pointer arithmetic in other areas.
The bug was contained in BKE/intern/nla.c, where the wrong macro was
used as the minimum frame value. Instead of `MINAFRAMEF`, `MINFRAMEF`
was used (the former is around -10k, the latter is 0, both fp32).
Differential Revision: https://developer.blender.org/D15940
Starting from GLibC 2.34, deprecated `__malloc_hook` & co. have been
removed from headers, while still present in the shared library itself.
This means that it is no more possible to build Blender with USD 22.03
on recent linux systems.
While USD 22.08 has a fix to this issue, it is unlikely to be upgraded
for Blender 3.4, and definitely not for Blender 3.3.
This commit ensures Blender can build with USD 22.03 and glibc >= 2.34.
Ref.: T99618,
https://devtalk.blender.org/t/building-blender-on-linux-using-glibc-2-34-raises-linking-errors-from-the-usd-library/24185
Patch by @brecht, many thanks.
special_aftertrans_update would always use TransInfo values (not
the values_final -- we need the final values to follow numinput, snapping,
etc).
Maniphest Tasks: T100851
Differential Revision: https://developer.blender.org/D15893
Provide reasonable defaults for UV unwrap for triangles with zero area:
* Three vertices are arranged in a line.
* Two vertices are at the same 3D location.
* All three vertices are at the same 3D location.
Change fixes quads / ngons which have triangulations with zero area.
Change fixes both "Angle Based" method and "Conformal" method.
Differential Revision: https://developer.blender.org/D15922
An edge can be marked BM_ELEM_SEAM, which means the UV co-ordinates
on either side of the edge are actually independent, even if they
happen to currently have the same value.
This commit optionally add support for UV Seams when computing islands.
Affects UV sculpt tools, individual origins, UV stitch and changing
UV selection modes etc.
Required for upcoming packing refactor which requires seam support
when computing islands.
Differential Revision: https://developer.blender.org/D15875
Caused by 21f2bacad9 which copies a few more values to
the original meshes from the "nomain" meshes. The "nomain" meshes
created from the originals need to copy some values as well.
This operator allows to set the start point for any cyclic stroke.
This is very handy to fit interpolation issues or
use thickness modifier.
Note: There is small change in this commit to fix
a typo error in the name of the operator.
Reviewed By: mendio, frogstomp
Maniphest Tasks: T100827
Differential Revision: https://developer.blender.org/D15881
Build against Python from precompiled libraries by default, instead of
requiring framework from python.org package install. The resulting bpy module
can still be used with any Python install of the same version.
Use the same CMake find module as Linux. This simplifies code, and makes it
possible to manually set PYTHON_* variables in CMake configuration.
Remove WITH_PYTHON_FRAMEWORK option for regular Blender build, as this doesn't
work well due to missing required Python packages. Advanced users can still
set PYTHON_ROOT_DIR=/Library/Frameworks/Python.framework/Versions/3.10 for
the same result.
Although unlikely, the result of BKE_appdir_folder_id_create may be NULL.
Check this for bookmark operators & move writing bookmarks into a shared
utility function.
This has been a pain, newer OpenVDB forcefully trying to use more recent
system TBB (oneTBB) instead of the one built by this script.
Also include a few minor unrelated fixes.
Ref T99618.
This has the advantage of being able to use information about the
existing OSL closures in various places without code duplication. In
addition, the setup code for all closures was moved to standalone
functions to avoid usage of virtual function calls in preparation for GPU
support.
This patch was split from D15902.
Differential Revision: https://developer.blender.org/D15917
The SVM attribute map is always generated and uses a simple
linear search to lookup by an opaque ID, so can reuse that for OSL
as well and simply use the attribute name hash as ID instead of
generating a unique value separately. This works for both object
and geometry attributes since the SVM attribute map already
stores both. Simplifies code somewhat and reduces memory
usage slightly.
This patch was split from D15902.
Differential Revision: https://developer.blender.org/D15918
As described in T95966, the goal is to move to a "struct of arrays"
approach rather than gathering an arbitrary set of data in hard-coded
structs. This has performance benefits, but also code complexity
benefits (this patch removes plenty of code, though the boilerplate
for the new operators outweighs that here).
To mirror the internal change, the options for storing mesh bevel
weights are converted into operators that add or remove the layer,
like for some other layers.
The most complex change is to the solidify modifier, where bevel
weights had special handling. Other than that, most changes are
removing clearing of the weights, boilerplate for the add/remove
operators, and removing the manual transfer of bevel weights
in bmesh - mesh conversion.
Eventually bevel weights can become a fully generic attribute,
but for now this patch aims to avoid most functional changes.
Bevel weights are still written and read from the mesh in the old way,
so neither forward nor backward compatibility are affected. As described
in T95965, writing in the old format will be done until 4.0.
Differential Revision: https://developer.blender.org/D14077
- Remove "take ownership" argument which was confusing and always true
- The argument made ownership very confusing
- Better to avoid boolean arguments that switch a function's purpose
- Remove "mask" argument which was basically wrong and not used properly
- "EVERYTHING" was used because developers are wary of removing data
- Instead use `CD_MASK_MESH` for its purpose of original mesh data
- Remove use of shallow copied temporary mesh, which is unnecessary now
- Split shape key processing into separate functions and use C++ types
- Copy fields explicitly rather than using memcpy for the whole struct
- Use higher level functions and avoid redundant code
- The whole idea is pretty simple and can be built from standard logic
- Adjust `CustomData` logic to be consistent with "assign" expectations
- Clear the layer data from the source, and moves the anonymous ID
Differential Revision: https://developer.blender.org/D15857
Currently, when subdividing every single vertex on every loose edge,
Blender iterates over all other edges to find neighbors. This has
quadratic runtime and can be very slow. Instead, first create a
map of edges connected to each vertex.
With about 10000 edges, the performance goes from very slow to very
smooth in my tests. Because of the nature of quadratic runtime, the
improvement will depend massively on the number of elements.
The only downside to this is that the map will still be built when
there are only a couple loose edges, but that case is probably not
so common.
Differential Revision: https://developer.blender.org/D15923
This function did multiple things making it difficult to know
what was intended by the caller:
- Directory & file join.
- Expand relative '//' prefix to an optional directory.
- Expand drive letters on windows (guessing with fall-backs).
- Switch slashes to native direction.
This functionality wasn't needed as the full directory was always passed
in, so guessing the drive letter wasn't needed.
If functionality to add drive letters onto paths is needed in the future
a function that only does this can be added.
The logging API was freed before calling wm_autosave_delete that called
BKE_appdir_folder_id_create to get the auto-save location (when the
temporary directory wasn't found). Detecting BLENDER_USER_AUTOSAVE would
log details about the path, which would read data freed by CLG_exit.
Resolve by calling CLG_exit last.
This patch implements the bokeh blur node for the realtime compositor.
The patch is still missing the Variable Size option because it depends
on the Levels node, which is yet to be implemented. In particular, it
requires the computation of global texture properties like the maximum
color.
Differential Revision: https://developer.blender.org/D15768
Reviewed By: Clement Foucault
This patch adds support for the skip realization option of the input
descriptor. Inputs that request skip realization will not be realized on
the operation domain of the operation and will not contribute to its
computation, and consequently, they can't be a domain input.
An example is the bokeh input of the Bokeh Blur node, which is actually
a resource that is decoupled from the rest of the inputs and should not
affect or be affected by their domain.
Differential Revision: https://developer.blender.org/D15767
Reviewed By: Clement Foucault
This patch implements the Scale node for the realtime compositor.
Differential Revision: https://developer.blender.org/D15758
Reviewed By: Clement Foucault
The library overrides context menu operators only make sense when at
least one ID is selected in the Outliner. So don't show them unless
that's the case. This also means the menu items don't show up anymore
for things like RNA properties, or the overridden properties in the
Library Overrides Properties view.
Also see 7eda9d8dda and the previous commit.
The asset context menu operators only make sense when at least one ID is
selected in the Outliner. So don't show them unless that's the case.
This also means the menu items don't show up anymore for things like RNA
properties, or the overridden properties in the Library Overrides
Properties view.
Also see 7eda9d8dda.
This patch implements the blur node for the realtime compositor. The patch is
still missing the Variable Size option because it depends on the Erode/Dilate
node, which is yet to be implemented. Furthermore, there are a number of
optimizations that can be implemented, the most important of which is the IIR
implementation of the Fast Gaussian filter, as well as the use of hardware
filtering and thread local memory. The latter of which was attempted but was
not robust enough, so it will be submitted as separate patch.
Differential Revision: https://developer.blender.org/D15663
Reviewed By: Clement Foucault
This patch implements the pixelate node for the realtime compositor.
Differential Revision: https://developer.blender.org/D15662
Reviewed By: Clement Foucault
Shader and compositor curve nodes change their inputs even if they are
at identity settings.
That is because shader and compositor curve nodes evaluate their curve
map texture samplers at the normalized input directly, disregarding the
fact that the samplers are evaluated using linear interpolation. This
causes the output to be slightly different that it should be.
This patch remaps the evaluation parameters such that the texture
sampler is evaluated at the center of the pixels.
Differential Revision: https://developer.blender.org/D15811
Reviewed By: Clement Foucault
Output of make encounters path names that are single-quoted. This
causes the path to be misinterpreted and fail validation.
Resolves error in "make check_cppcheck"
Ref D15801 (partially applied)
Add BKE_object_defgroup_flip_map_unlocked which excludes locked groups
from the flip-map.
Reviewed By: zanqdo, campbellbarton
Maniphest Tasks: T96787
Ref D15317
The following changes have been made to this attribute with
WITH_PYTHON_MODULE is defined:
- Defaults to an empty string (instead of pointing to __init__.so).
- It's writable, so script authors can point to a valid Blender binary.
`where_am_i(..)` is no longer used by BKE_appdir_program_path_init,
there is now a separate code-path for setting the initial program
directory, calls after this can be used to set the binary path.
Replace the argument with an in ifdef in BKE_appdir_program_path_init.
At the time `blenkernel` didn't define WITH_PYTHON_MODULE, since it does
now there is no need for an argument. With the minor benefit of fewer
preprocessor checks in the main() function.
Building WITH_PYTHON_MODULE was creating a "bpy" module that required
Blenders data-files to be located in the module search path too.
This mean that a typical installation on Linux would create:
- `/usr/lib/python3.10/site-packages/bpy.so`
- `/usr/lib/python3.10/site-packages/3.4`
(containing `scripts` & `datafiles`).
The new behavior creates:
- `/usr/lib/python3.10/site-packages/bpy/__init__.so`
- `/usr/lib/python3.10/site-packages/bpy/3.4`
With the advantage that the "bpy" directory is the self contained Python
module.
No changes are needed for the module loading logic as the mechanism to
swap in blend internal Python "bpy" module
(defined in `release/scripts/modules/bpy/__init__.py`)
works the same in both instances.
Thanks to Brecht for macOS support.
Reviewed by brecht
Ref D15911
Use macro NODE_OT_translate_attach for attaching node created through
link-drag-search to frame, as suggested by Leon Schittek (@lone_noel)
in D15888.
Differential Revision: https://developer.blender.org/D15920
The node tree used to detect if the tree was a node group wasn't the
last in the node editor's path like it should be, so the search thought
that all shader node groups weren't node groups.
Probing strategies must iterate over every possible hash, but the linear
strategy only did 2^32 iterations, not 2^64. Updating this was missed
in 8cbbdedaf4. Also fix an unnecessary comma.
Differential Revision: https://developer.blender.org/D15913
The context menu would always show a section with "Select", "Deselect",
"Hide", "Unhide" and "Select Linked" if there were no more specific
operators to show (e.g. modifier operations). For many tree elements
they did not make sense and simply would do nothing. Only show the
section for supported types.
- Remove unnecessary calls to `get_element_operation_type()` (result
wasn't used).
- Remove branches/checks for cases that couldn't possibly happen.
(assert instead).
- Ensure all return arguments are set so caller can't make the mistake
of forgetting that.
- Early exit instead of big `if` block.
- Use `const`.
a) There were two filter icons next to each other in the header which
isn't exactly professional, b) the filter was redundant since IDs are
now grouped under an ID type element ("Objects", "Collection", ...)
anyway.
In the hierarchies view it was already hidden (because the whole point
of it is to show relationships between IDs, you wouldn't want to have
any parts of the hierarchy hidden).
Searching isn't possible in the hierarchies view anymore, so the options
for it shouldn't be displayed either.
Followup to 21b92a5f31, forgot to remove these.
c9a9967903 added a workaround for performance issues in heavy
production scenes in the library overrides hierarchies view, reducing
the amounts of elements to be built. Searching for elements would still
have to build the entire tree, so Blender would essentially freeze when
searching in mentioned heavy scenes. Removing the search functionality
works around this issue for now.
BKE_appdir_program_path_init would override the module path extracted
from the Python module, replacing it with the Python executable.
This caused the data files not to be found and the module not to load.
- Page up/down scrolls up/down an entire page
- Home resets the scrolling back to the bottom.
The fact that these were missing was probably an oversight. Other
similar editors have them.
This works by including the "View2D Buttons List" keymap for the
console, which the other similar editors use as well.
A couple years ago D8598 made it so that C++ operators generally
should use "default" sort mode, which remembers previously used sort
setting. Back then all the places that needed it got changed to use
this "default" one, but since then some more IO code landed, where
seemingly by accident it used "sort by file name":
- USD importer,
- Grease Pencil exporter,
- OBJ importer & exporter,
- STL importer.
Reviewed By: Julian Eisel
Differential Revision: https://developer.blender.org/D15906
Implement ideas from T96297:
- Fix "invalid axis settings" (both forward & up along the same
direction) validation: now similar to the Python based code, when
invalid axis is applied, the other axis is changed to not conflict.
- Make axis enums be expanded inside the row, similar to Collada UI.
- Move "selected only" near the top, similar to how it's in Collada,
USD, FBX and glTF export UIs.
- Move animation export options to the bottom.
Caused by {rBf1c0249f34c4}
This is what (I think) went wrong in the above commit:
- `join_mesh_single` was writing material indices to the custom data /
attribute of the source mesh
- the `polyofs` of each mesh that was joined was not taken into account
Now, instead of using the AttributeWriter on a particular mesh, use the
CustomData (`pdata`) - that is constantly changed during joining -
directly for writing.
Otherwise we end up writing into customdata that has not been "extended"
yet (even if we use the destination mesh).
Also note that even on the destination mesh, CustomData would be freed
anyways after all calls to `join_mesh_single` took place, to be replaced
with the mentioned `pdata` which should be the single customdata to
write to here.
When doing this (writing to `pdata`), we also need to take into account
the poly offset of each contributing mesh.
Maniphest Tasks: T100822
Differential Revision: https://developer.blender.org/D15878
When Blender is built as a Python module, exit early if the major
and minor versions don't match. Without this, the error message can
be cryptic/unhelpful.
Replace `mesh_attributes`, `mesh_attributes_for_write` and the point
cloud versions with methods on the `Mesh` and `PointCloud` types.
This makes them friendlier to use and improves readability.
Differential Revision: https://developer.blender.org/D15907
- ACTIVE flag is no longer in use.
- DESELECT was used in some places as an alias for false,
even though this could arguably help readability, in practice this
was often passed with a selection flag leading to confusing calls
such as `select_beztriple(bezt, DESELECT, SELECT, HIDDEN)`.
Replace SELECT/DESELECT with true/false in these cases.
- Remove ED_types.h. Add a 'SELECT' definition to DNA_anim_types.h,
for fcurve_test, we could use a shared DNA header, or remove use of
the define entirely in favor of typed enums.
This removes the defunct handling of the ACTIVE flag in
TimeMarker::flags. It's not possible for that flag to be set though
normal operation.
Differential Revision: https://developer.blender.org/D15828
This patch consists of two related fixes. The first is a simple fix for
forward compatibility, setting the Mesh.dvert pointer when writing a
file allows old Blender versions to read vertex groups from newly saved
files.
The second part is a bit uglier and more complex. Normally mesh vertex
group data is read in mesh_blend_read_data, for backward compatibility
with very old files. However, after 05952aa94d the mesh.dvert
pointer was not set, so the data was not read. Reading vertex group
layers when reading custom data is enough to fix that issue. We need to
read the data from *both* places, but BKE_defvert_blend_read cannot run
twice without memory leaks, so first try reading from custom data, then
read the pointer if that fails.
Differential Revision: https://developer.blender.org/D15905
Minor adjustments to event icons required after recent font changes.
See D15582 for more details and examples.
Differential Revision: https://developer.blender.org/D15582
Reviewed by Brecht Van Lommel
When exporting OBJ/MTL animation, texture file paths of image
sequences were not adjusted to contain the correct frame number.
Fixes T100669.
Also, the OBJ exporter was wrongly writing to the same .mtl file
for each exported frame, which is a regression compared to the
legacy Python exporter.
This adds a new `blender::BitVector` data structure that was requested
a couple of times. It also replaces usages of `BLI_bitmap` in C++ code.
See the comment in `BLI_bit_vector.hh` for more details about the
advantages and disadvantages of using a bit-vector and how the new
data structure compares to `std::vector<bool>` and `BLI_bitmap`.
Differential Revision: https://developer.blender.org/D14006
Follow up to D15904, a bunch of places had exact same logic for
"is filepath set? if not, set some default one", so factor all that out
into a separate ED_fileselect_ensure_default_filepath function.
Most/all C++ based IO code had a pattern of doing using
RNA_struct_property_is_set to check whether a default path needs to
be set. However, it returns false for properties restored from
"previous operator settings" (property restoration code sets
IDP_FLAG_GHOST flag on them, which "is set" sees and goes
"nope, not set").
The fix here is to apply similar logic as 10 years ago in the
T32855 fix (rBdb250a4): use RNA_struct_property_is_set_ex instead.
Reviewed By: Campbell Barton
Differential Revision: https://developer.blender.org/D15904
From re-checking related code, it seems that we already always ensure
consistency of the `lib` pointer between embedded IDs and their owners.
This commit only adds some asserts in ambedded ID read code to
double-check this.
Note that there are still some references to proxies left, in some cases
it's unclear if the code related to the comment is even still relevant,
this goes beyond mere cleanup to address then.
It turns out upon close inspection that the 'deform only' mesh
only includes leading deform modifiers, rather than all of them
like crazyspace evaluation. This reduces the effect of the change
in rB9823a8f72be8 to using the fully evaluated mesh (all modifiers)
when the whole stack resulted in no topology change.
- Reduce variable scope.
- Use snake-case for variables.
- Remove unnecessary counter when building file-list.
- Remove break after return.
- Use early return.
- Add missing braces.
Use `verts` instead of `vertices` and `polys` instead of `polygons`
in the API added in 05952aa94d. This aligns better with
existing naming where the shorter names are much more common.
Adds a new operator to automatically rotate UV Islands into alignment.
Modes:
* Auto (All edges)
* Geometry (V direction will point in geometry direction) [1]
* Edge (Rotate until selected edge is in V direction)
Also adds uv_sync_selection support to UV Randomize Transform.
Resolves: T78399
Differential Revision: https://developer.blender.org/D15820
[1] Listed as "World" in Task description.
- Use pascel-case type names, instead of snake-case with `_t` suffix.
- Use `GWL_` prefix (short for GhostWayLand), to distinguish these
types from ghost (`GHOST_*`) and wayland (`wl_*`) types.
- Rename `input` to `seat` (following wayland's own terminology).
- Use `wl_` prefix for wayland native variables which have locally
defined equivalents so `GWL_Output *output` isn't confused with
`struct wl_output *wl_output`. As the locally defined types are used
more often this is less verbose overall.
Note that lib_override functions have kept the unused argument,
but this may be removed too. It impacts many lib_override functions
so this can be handled separately.
This commit is a big overhaul to the Mikktspace module, which is used
to compute tangents. I'm not calling it a rewrite since it's the
result of a lot of iterations on the original code, but pretty much
everything is reworked somehow.
Overall goal was to a) make it faster and b) make it maintainable.
Notable changes:
- Since the callbacks for requesting geometry data were a big
bottleneck before, I've ported it to C++ and made it header-only,
templating on the data source. That way, the compiler generates code
specific to the caller, which allows it to inline the data source and
specialize for some cases (e.g. subd vs. non-subd in Cycles).
- The one input parameter, an optional angle threshold, was not used
anywhere. Turns out that removing it allows for considerable
algorithmic simplification, removing a lot of the complexity in the
later stages. Therefore, I've just removed the option in the new code.
- The code computes several outputs, but only one (the tangent itself)
is ever used in Blender. Therefore, I've removed the others to
simplify the code. They could easily be brought back if needed, none
of the algorithmic simplifications are conflicting with them.
- The original code had fallback paths for many steps in case temporary
memory allocation fails, but that never actually gets used anyways
since malloc() doesn't really ever return NULL in practise, so I
removed them.
- In general, I've restructured A LOT of the code to make the
algorithms clearer and make use of some C++ features (vectors,
std::array, booleans, classes), though there's still some of cleanup
that could be done.
- Parallelized duplicate detection, neighbor detection, triangle
tangent computation, degenerate triangle handling and tangent space
accumulation.
- Replaced several algorithms with faster equivalents: Duplicate
detection uses a (concurrent) hash set now, neighbor detection uses
Radixsort and splits vertices by index pairs etc.
As for results, the exact speedup depends on the scene of course, but
let's consider the file from T97378:
- Blender 3.1 (before D14675): 6.07sec
- Blender 3.2 (with D14675): 4.62sec
- rBf0a36599007d (last nightly build): 4.42sec
- With this commit: 0.90sec
This speedup will mostly be noticed at the start of Cycles renders and,
even more importantly, in Eevee when doing something that changes the
geometry (e.g. animating) on a model using normal maps.
Differential Revision: https://developer.blender.org/D15589
This changes the two tangent-related files in BKE to C++ in preparation for the C++ Mikktspace port in D15589.
For now, they still use the original Mikktspace.
Differential Revision: https://developer.blender.org/D15636
The `mvert` pointer was passed to `bm_to_mesh_shape` and was never
reset to the beginning of the vertex array. Use spans instead to
eliminate this error completely. This also has the benefit of letting
the CustomData system handle allocation of mesh layers.
3484c6d4f1 removed parts of 6e5eb46d73 by mistake,
returning no attribute when attribute data wasn't found. However, we
want that attributes can exist even on empty geometry. This commit
restores the fix and tries to make it more explicit to avoid the same
mistake again.
Differential Revision: https://developer.blender.org/D15899
The constraint attempted to access mesh normals on a mesh with
wrapper type ME_WRAPPER_TYPE_BMESH. This commit reverses the if
statements so that If there is an editmesh then we use that as the
source of truth - otherwise use the evaluated mesh.
Differential Revision: https://developer.blender.org/D15809
It's easier to keep track of state in these algorithms if it's stored in
a central place like a set. Plus, using flags requires clearing them
beforehand. For the selected linked operators, using the topology
cache means we don't have to iterate over all links.
Before 58c650a44c, the nodes span was rebuilt on every redraw. Now
that it's only rebuilt as necessary, we need to tag it dirty when nodes
are reordered. Relying on the order of the nodes at all isn't ideal, but
it's fairly fundamental in many areas at the moment.
The recent revert of Apple silicon inlining changes to avoid long compile times
worked on macOS 12, but in macOS 13 Beta it results in render errors. This may
be a compiler bug and perhaps get fixed in time, but try to be on the safe side
and ensure Blender 3.3.0 works regardless.
This brings part of the inlining back, which brings improved performance but
also longer compiler times again. Compile time is around 2min now, where the
previous full inlining was about 5-7min.
Patch by Michael Jones.
Differential Revision: https://developer.blender.org/D15897
Do not allow the loading of old-style non-scalable fonts.
See D15884 for more details.
Differential Revision: https://developer.blender.org/D15884
Reviewed by Brecht Van Lommel
Many existing .blend files (including startup ones) seem to have invalid
embedded IDs (they are not properly tagged with `LIB_EMBEDDED_DATA`).
We cannot `do_version` this so just fix it on the fly when detecting the
issue. User then need to re-save these files.
We also need to update some release files (default factory startup is
OK, but e.g. the VSE template one is not).
Keeping the assert is important here, as such missing flag is a critical
data corruption that can potentially have many serious consequences
throughout the ID management code.
A `blender::Pool` can construct and destruct elements without reordering. Freed items memory
will be reused by next allocations.
Elements are allocated in chunks to reduce memory fragmentation and avoid reallocation.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D15894
The recent revert of Apple silicon inlining changes to avoid long compile times
worked on macOS 12, but in macOS 13 Beta it results in render errors. This may
be a compiler bug and perhaps get fixed in time, but try to be on the safe side
and ensure Blender 3.3.0 works regardless.
This brings part of the inlining back, which brings improved performance but
also longer compiler times again. Compile time is around 2min now, where the
previous full inlining was about 5-7min.
Patch by Michael Jones.
Differential Revision: https://developer.blender.org/D15897
Completely forgot in rBcd49fee74114 to handle the owner ID copying case
(this code now also needs to re-assign to `owner_id` pointer of the
newly copied embedded IDs to their rightful owner).
In 8cf52e8226 we assumed that the UV IBO's are only needed in edit mode,
however the UV lines also need to work in texture paint mode. So prefer to
use bmesh when available to fix the original bug, but don't assume the face
is hidden when there is no bmesh.
Differential Revision: https://developer.blender.org/D15895
Caused by {rB31365c6b9e4c}.
The new API `CustomDataAttributeProvider` just did not support
`CD_MASK_PROP_STRING`.
While strings dont perform nicely in their current form, still add
support back for the API.
Adding Strings to the supported types seems to survive just
fine, see attached example file.
Maniphest Tasks: T100747
Differential Revision: https://developer.blender.org/D15851
Otherwise we disable this feature. This is because some driver
does not support any vertex storage buffers but still support
8 ssbo in fragment shader.
Enables a feature flag during OpenGL device initialisation on macOS, which increases the available number of texture samplers available for use within shaders. Enabling this flag removes purple rendering artifacts present in certain EEVEE materials, when the existing limit of 16 is exceeded.
This feature flag is supported on Apple Silicon and AMD GPUs, for devices supporting macOS 11.0+. Device initialisation first tests whether GL device creation with the flag is supported, if not, we fall back to standard initialisation.
Other solutions would not be trivial or incur additional performance overhead or feature limitations. Other workarounds, such as texture atlas's, could already be created by artists.
{F13245498}
{F13245497}
Reviewed By: jbakker
Maniphest Tasks: T57759, T63935
Differential Revision: https://developer.blender.org/D15336
The only difference between `GPU_SHADER_2D_LINE_DASHED_UNIFORM_COLOR`
and `GPU_SHADER_3D_LINE_DASHED_UNIFORM_COLOR` is that in the vertex
shader the 2D version uses `vec4(pos, 0.0, 1.0)` and the 3D version
uses `vec4(pos, 1.0)`.
But VBOs with 2D attributes work perfectly in shaders that use 3D
attributes. Components not specified are filled with components from
`vec4(0.0, 0.0, 0.0, 1.0)`.
So there is no real benefit to having two different shader versions.
The only real difference between `GPU_SHADER_2D_SMOOTH_COLOR` and
`GPU_SHADER_3D_SMOOTH_COLOR` is that in the vertex shader the 2D
version uses `vec4(pos, 0.0, 1.0)` and the 3D version uses
`vec4(pos, 1.0)`.
But VBOs with 2D attributes work perfectly in shaders that use 3D
attributes. Components not specified are filled with components from
`vec4(0.0, 0.0, 0.0, 1.0)`.
So there is no real benefit to having two different shader versions.
This will simplify porting shaders to python as it will not be
necessary to use a 3D and a 2D version of the shaders.
In python the new name for '2D_SMOOTH_COLOR' and '3D_SMOOTH_COLOR'
is 'SMOOTH_COLOR', but the old names still work for backward
compatibility.
The only real difference between `GPU_SHADER_2D_IMAGE` and
`GPU_SHADER_3D_IMAGE` is that in the vertex shader the 2D
version uses `vec4(pos, 0.0, 1.0)` and the 3D version uses
`vec4(pos, 1.0)`.
But VBOs with 2D attributes work perfectly in shaders that use 3D
attributes. Components not specified are filled with components from
`vec4(0.0, 0.0, 0.0, 1.0)`.
So there is no real benefit to having two different shader versions.
This will simplify porting shaders to python as it will not be
necessary to use a 3D and a 2D version of the shaders.
In python the new name for '2D_IMAGE' and '3D_IMAGE'
is 'IMAGE', but the old names still work for backward
compatibility.
The only real difference between `GPU_SHADER_2D_FLAT_COLOR` and
`GPU_SHADER_3D_FLAT_COLOR` is that in the vertex shader the 2D
version uses `vec4(pos, 0.0, 1.0)` and the 3D version uses
`vec4(pos, 1.0)`.
But VBOs with 2D attributes work perfectly in shaders that use 3D
attributes. Components not specified are filled with components from
`vec4(0.0, 0.0, 0.0, 1.0)`.
So there is no real benefit to having two different shader versions.
This will simplify porting shaders to python as it will not be
necessary to use a 3D and a 2D version of the shaders.
In python the new name for '2D_FLAT_COLOR'' and '3D_FLAT_COLOR'
is 'FLAT_COLOR', but the old names still work for backward
compatibility.
The only real difference between `GPU_SHADER_2D_UNIFORM_COLOR` and
`GPU_SHADER_3D_UNIFORM_COLOR` is that in the vertex shader the 2D
version uses `vec4(pos, 0.0, 1.0)` and the 3D version uses
`vec4(pos, 1.0)`.
But VBOs with 2D attributes work perfectly in shaders that use 3D
attributes. Components not specified are filled with components from
`vec4(0.0, 0.0, 0.0, 1.0)`.
So there is no real benefit to having two different shader versions.
This will simplify porting shaders to python as it will not be
necessary to use a 3D and a 2D version of the shaders.
In python the new name for '2D_UNIFORM_COLOR'' and '3D_UNIFORM_COLOR'
is 'UNIFORM_COLOR', but the old names still work for backward
compatibility.
Differential Revision: https://developer.blender.org/D15836
Minimum horizontal area size should be scaled by UI resolution.
See D15865 for more details.
Differential Revision: https://developer.blender.org/D15865
Reviewed by Brecht Van Lommel
For copy-on-write, we want to share attribute arrays between meshes
where possible. Mutable pointers like `Mesh.mvert` make that difficult
by making ownership vague. They also make code more complex by adding
redundancy.
The simplest solution is just removing them and retrieving layers from
`CustomData` as needed. Similar changes have already been applied to
curves and point clouds (e9f82d3dc7, 410a6efb74). Removing use of
the pointers generally makes code more obvious and more reusable.
Mesh data is now accessed with a C++ API (`Mesh::edges()` or
`Mesh::edges_for_write()`), and a C API (`BKE_mesh_edges(mesh)`).
The CoW changes this commit makes possible are described in T95845
and T95842, and started in D14139 and D14140. The change also simplifies
the ongoing mesh struct-of-array refactors from T95965.
**RNA/Python Access Performance**
Theoretically, accessing mesh elements with the RNA API may become
slower, since the layer needs to be found on every random access.
However, overhead is already high enough that this doesn't make a
noticible differenc, and performance is actually improved in some
cases. Random access can be up to 10% faster, but other situations
might be a bit slower. Generally using `foreach_get/set` are the best
way to improve performance. See the differential revision for more
discussion about Python performance.
Cycles has been updated to use raw pointers and the internal Blender
mesh types, mostly because there is no sense in having this overhead
when it's already compiled with Blender. In my tests this roughly
halves the Cycles mesh creation time (0.19s to 0.10s for a 1 million
face grid).
Differential Revision: https://developer.blender.org/D15488
This reverts commit 32d4a67017 thus fixing T81002 again.
And in order not to break T81212 (again) a different fix was implemented.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D15840
Add a dedicated `owner_id` pointer to ID types that can be embedded
(Collections and NodeTrees), and modify slightly come code to make
handling those more safe and consistent.
This implements first part of T69169.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D15838
The per-keymap user preferences messages were not extracted. This goes
through the keymap preferences RNA, as well as Python files for UI.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15871
When saving, the default file name is "untitled" regardless of
selected language. This can be translated, like many graphical
applications do.
This applies to:
- blend file
- alembic file
- collada file
- obj file
- usd file
- rendered image
- grease pencil export
- subtitles export
- other Python exports through ExportHelper
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15868
- Use the proper context (Operator, since that is what the cursor
keymap status uses)
- Add a few missing message extraction tags
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15867
This function allows to set the start point for cyclic strokes.
The function is required by a new modifier and operator
that are currently under development.
The new code was not using the correct default attribute. Add access to
`g_data.P` through `node_tex_coord_position()` to replace the old
`GPU_builtin(GPU_VIEW_POSITION)` which was used before.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D15862
It was using normalized vector instead of `viewCameraVec` which account for
orthographic views.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D15861
The multi-socket input sorting was used for two purposes: moving links
to the proper positions when dragging a new link, and resetting the
multi-input indices on the links when removing a link. They are now
separated into two functions, and the sorting when making a group
node that didn't accomplish anything is removed (in that case a
proper implementation would copy the indices from the original
exterior sockets).
The previous implementation iterated over all links multiple times
recursively. Instead, use the node tree topology cache, only iterate
over all links once, and use a stack to propagate the mute upsteam
and downstream.
Use C++ Map that supports the duplication natively. Use vectors instead
of linked lists, and adjust naming. Also remove combination of reroutes
for input sockets, which doesn't make sense since a reroute isn't
allowed to combine multiple input links into one output.
Caused by {rB3f3d82cfe9ce}
Since above commit, a `uiRNACollectionSearch` may contain a NULL
`search_prop`, crashing the menu entry for "Jump To Target"
(`ui_jump_to_target_button_poll`).
Now safeguard against this with a NULL check (getting search callbacks
to work for "Jump To Target" can be investigated in master).
Maniphest Tasks: T100731
Differential Revision: https://developer.blender.org/D15832
Since above commit, `BKE_id_attributes_active_get` would also return
"internal" attributes like ".hide_poly" or ".hide_vert".
As a consequence, a couple of poll functions dont return false anymore
(attribute remove, attribute convert), allowing these operators to
execute, but acting on this "internal" layers is just asking for
trouble.
In the UI, we dont see these attributes, because `MESH_UL_attributes`
checks `is_internal`, same thing we do now in
`BKE_id_attributes_active_get`.
Maniphest Tasks: T100687
Differential Revision: https://developer.blender.org/D15833
The location of a reroute node and its sockets should be the same,
only stored in different coordinate spaces. Because the node's location
is the ground truth, use that for finding whether the mouse is hovering.
Now dragged handles are handled separately, and the function returns a
statically sized array by value. The functions are also renamed to be
more consistent with curve naming elsewhere in Blender.
Changes to the text caret (cursor) when editing Text objects in the
3D Viewport.
See D15797 for more details and examples.
Differential Revision: https://developer.blender.org/D15797
Reviewed by Brecht Van Lommel
Previously for most materials (especially the ones without any
textures), the nodes were "off screen" way to the right, requiring
a view framing to even see them.
Also, as soon as multiple images were used, many nodes overlapped
one another and the connections were all a mess.
Simplify all that, and now each node type (coordinate, mapping, image,
normal map, bsdf etc.) is in it's own column, with BSDF at zero
coordinate. Each used image (along with any possible coordinate,
mapping, normal map) is it's own row. The resulting connections
are much cleaner.
Replacement of our Hebrew font, which has bad variable weight default.
See D15846 for more details.
Differential Revision: https://developer.blender.org/D15846
Reviewed by Brecht Van Lommel
This replaces the direct shader uniform layout declaration by a linear
search through a global buffer.
Each instance has an attribute offset inside the global buffer and an
attribute count.
This removes any padding and tighly pack all uniform attributes inside
a single buffer.
This would also remove the limit of 8 attribute but it is kept because of
compatibility with the old system that is still used by the old draw
manager.
Reversing Bezier handle types and positions would skip the middle point
of curves with an odd number of segments, which is still necessary to
swap in order to avoid changing the curve's shape.
This is a new implementation of the draw manager using modern
rendering practices and GPU driven culling.
This only ports features that are not considered deprecated or to be
removed.
The old DRW API is kept working along side this new one, and does not
interfeer with it. However this needed some more hacking inside the
draw_view_lib.glsl. At least the create info are well separated.
The reviewer might start by looking at `draw_pass_test.cc` to see the
API in usage.
Important files are `draw_pass.hh`, `draw_command.hh`,
`draw_command_shared.hh`.
In a nutshell (for a developper used to old DRW API):
- `DRWShadingGroups` are replaced by `Pass<T>::Sub`.
- Contrary to DRWShadingGroups, all commands recorded inside a pass or
sub-pass (even binds / push_constant / uniforms) will be executed in order.
- All memory is managed per object (except for Sub-Pass which are managed
by their parent pass) and not from draw manager pools. So passes "can"
potentially be recorded once and submitted multiple time (but this is
not really encouraged for now). The only implicit link is between resource
lifetime and `ResourceHandles`
- Sub passes can be any level deep.
- IMPORTANT: All state propagate from sub pass to subpass. There is no
state stack concept anymore. Ensure the correct render state is set before
drawing anything using `Pass::state_set()`.
- The drawcalls now needs a `ResourceHandle` instead of an `Object *`.
This is to remove any implicit dependency between `Pass` and `Manager`.
This was a huge problem in old implementation since the manager did not
know what to pull from the object. Now it is explicitly requested by the
engine.
- The pases need to be submitted to a `draw::Manager` instance which can
be retrieved using `DRW_manager_get()` (for now).
Internally:
- All object data are stored in contiguous storage buffers. Removing a lot
of complexity in the pass submission.
- Draw calls are sorted and visibility tested on GPU. Making more modern
culling and better instancing usage possible in the future.
- Unit Tests have been added for regression testing and avoid most API
breakage.
- `draw::View` now contains culling data for all objects in the scene
allowing caching for multiple views.
- Bounding box and sphere final setup is moved to GPU.
- Some global resources locations have been hardcoded to reduce complexity.
What is missing:
- ~~Workaround for lack of gl_BaseInstanceARB.~~ Done
- ~~Object Uniform Attributes.~~ Done (Not in this patch)
- Workaround for hardware supporting a maximum of 8 SSBO.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D15817
This was an oversight as the matrix multiplication present in original
code was reversed.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D15858
This was caused by un-wanted normalization. This is a requirement of
the MikkTspace. The issue is that g_data.N is expected to be normalized
by many other functions and overriden by bump displacement.
Adding a new global variable containing the interpolated normal fixes the
issue AND make it match cycles behavior better (mix between bump and
interpolated normal).
Workaround the issue by adding an intermediate function. This is usually
the case when working with attributes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D15860
This uses the same sample classification approach as used for PMJ,
because it turns out to also work equally well with Sobol-Burley.
This also implements a fallback (random classification) that should
work "okay" for other samplers, though there are no other samplers
at the moment.
Differential Revision: https://developer.blender.org/D15845
This patch implements the dilate/erode node for the realtime compositor.
Differential Revision: https://developer.blender.org/D15790
Reviewed By: Clement Foucault
Since rB6269d66da, creating formats no longer depends solely on the
shader, but now depends on the dimensions used to fill the VBOs.
This allows 3D shaders to work flawlessly when assigned dimensions are
2D.
So there's no real benefit to us having shaders that are limited to 2D
use anymore.
This limitation makes it difficult to implement other builtin shaders
as they indirectly require a 2D version.
So this commit removes the 2D versions of the builtin sahders used in
Python , renames the string enums but keeps the old enums working for
backward compatibility.
(This brings parts of the changes reviewed in D15836).
This particular GPU driver does not constant fold all the way in order
to discard the unused branches.
To workaround that, we introduce a series of material flag that generates
defines that only keep used branches.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D15852
Upcoming cryptomatte patch would need access to these defines. So moving
them from film_lib to shader shared. We cannot include the film_lib as
it requires images/textures to be bound that we don't need.
At the same time fixes incorrect casing (`lAYER` => `LAYER`).
Full support for translation and compilation of shaders in Metal, using
GPUShaderCreateInfo. Includes render pipeline state creation and management,
enabling all standard GPU viewport rendering features in Metal.
Authored by Apple: Michael Parkin-White, Marco Giordano
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D15563
- Adding in compatibility paths to support minimum per-vertex strides for vertex formats. OpenGL supports a minimum stride of 1 byte, in Metal, this minimum stride is 4 bytes. Meaing a vertex format must be atleast 4-bytes in size.
- Replacing transform feedback compile-time check to conditional look-up, given TF is supported on macOS with Metal.
- 3D texture size safety check added as a general capability, rather than being in the gl backend only. Also required for Metal.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D14510
Implementation also contains a number of optimisations and feature enablements specific to the Metal API and Apple Silicon GPUs.
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D15369
As pointed out in D15827 comment, the unique_ptr usage in
ShaderNodetreeWrap related code does not sound very useful. Looking at
it, whole ShaderNodetreeWrap does not make much sense - it's only
ever created, and then immediately just one thing is fetched from it.
This very much sounds like "a function", so make it just that -
header file contains just a `create_mtl_node_tree` function, and the
whole implementation is hidden from the users. Which I've also
simplified into just a handful of freestanding functions.
No functionality or performance changes, but the code does get ~80
lines shorter.
Several visual tweaks to node links to make them overall fit in
better with the look of the node editor:
- Change the link thickness with the zoom level to a certain degree.
- Remove the fuzziness of the node link and its shadow/outline.
- The link outline color can now be made transparent.
- Add circles at the end of dragged links when connecting to sockets.
- Improve the banding of the color interpolation along the link.
- Adjust the spacing of dashes along straight node links.
Reviewed By: Pablo Vazquez, Hans Goudey
Differential Revision: http://developer.blender.org/D15036
The material indices have been moved out of MPoly since f1c0249f34.
That conversion happens in file reading code currently, so the material
indices have to be accessed the new way everywhere.
Fixes issues in importers written in C++ (T100737):
- Materials had one reference count too much. Affected Collada,
Alembic, USD, OBJ importers, looks like "since forever".
- Active material index was not properly set on imported meshes.
Regression since 3.3 (D15145). Affected Alembic, USD, OBJ. Note:
now it sets the first material as the active one, whereas
previously the last one was set as active. First one sounds more
"intuitive" to me.
Reviewed By: Bastien Montagne
Differential Revision: https://developer.blender.org/D15831
The "set default" callback doesn't need to be defined since it falls
back to clearing the memory, but since "construct" is optional, it
needs to be defined. Mistake in 25237d2625.
Blender may not apply certain UI data changes immediately when done via BPY.
This is a rather typical gotcha, better to have it documented.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D15614
The multi-dimensional Sobol pattern required us to carefully use as low
dimensions as possible, as quality goes down in higher dimensions. Now that we
have two sampling patterns that are at least as good, there is no need to keep
it around and the implementation can be simplified.
Differential Revision: https://developer.blender.org/D15788
Fix two issues in the previous implementation:
* Only power-of-two prefixes were progressively stratified, not suffixes.
This resulted in unnecessarily increased noise when using non-power-of-two
sample counts.
* In order to try to get away with just a single sample pattern, the code
used a combination of sample index shuffling and Cranley-Patterson rotation.
Index shuffling is normally fine, but due to the sample patterns themselves
not being quite right (as described above) this actually resulted in
additional increased noise. Cranley-Patterson, on the other hand, always
increases noise with randomized (t,s) nets like PMJ02, and should be avoided
with these kinds of sequences.
Addressed with the following changes:
* Replace the sample pattern generation code with a much simpler algorithm
recently published in the paper "Stochastic Generation of (t, s) Sample
Sequences". This new implementation is easier to verify, produces fully
progressively stratified PMJ02, and is *far* faster than the previous code,
being O(N) in the number of samples generated.
* It keeps the sample index shuffling, which works correctly now due to the
improved sample patterns. But it now uses a newer high-quality hash instead
of the original Laine-Karras hash.
* The scrambling distance feature cannot (to my knowledge) be implemented with
any decorrelation strategy other than Cranley-Patterson, so Cranley-Patterson
is still used when that feature is enabled. But it is now disabled otherwise,
since it increases noise.
* In place of Cranley-Patterson, multiple independent patterns are generated
and randomly chosen for different pixels and dimensions as described in the
original PMJ paper. In this patch, the pattern selection is done via
hash-based shuffling to ensure there are no repeats within a single pixel
until all patterns have been used.
The combination of these fixes brings the quality of Cycles' PMJ sampler in
line with the previously submitted Sobol-Burley sampler in D15679. They are
essentially indistinguishable in terms of quality/noise, which is expected
since they are both randomized (0,2) sequences.
Differential Revision: https://developer.blender.org/D15746
Use lowercase rgba channel names which still by-passes lossy nature
of DWA compression and which also keeps external compositing tools
happy.
Thanks Steffen Dünner for testing this patch!
Differential Revision: https://developer.blender.org/D15834
The old way of creating shaders is being replaced by using
`GPUShaderCreateInfo` for more portability.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D14634
With the new `attrs_info_get` method, we can get information about
the attributes used in a `GPUShader` and thus have more freedom in the
automatic creation of `GPUVertFormat`s
Reviewed By: fclem, campbellbarton
Differential Revision: https://developer.blender.org/D15764
The DWA compression code in OpenEXR has hardcoded rules which decides
which channels are lossy or lossless. There is no control over these
rules via API.
This change makes it so channel names of xyzw is used for cryptomatte
passes in Cycles. This works around the hardcoded rules in the DWA code
making it so lossless compression is used. It is important to use lower
case y channel name as the upper case Y uses lossy compression.
The change in the channel naming also makes it so the write code uses
32bit for the cryptomatte even when saving half-float EXR.
Fixes T96933: Cryptomatte layers saved incorrectly with EXR DWA compression
Fixes T88049: Cryptomatte EXR Output Bit Depth should always be 32bit
Differential Revision: https://developer.blender.org/D15823
An ID created with regualr ID management code should never ever be
directly freed directly.
For embedded nodetrees, there is a dedicated function.
Reviewed By: aras_p
Differential Revision: https://developer.blender.org/D15827
Leading to excessive memory usage compared to Blender 2.93. There's still
some avoidable memory usage remaining, due to the full float buffer in the
new image editor drawing and not loading the cached EXR from disk in tiles.
Main difficulty was handling multi-image baking and disk caches, which is
solved by associating a unique layer name with each image so it can be
matched when reading back the image from the disk.
Also some minor header changes to be able to use RE_MAXNAME in RE_bake.h.
These few lines making a copy of the final mesh were confusing.
The goal (I'm fairly certain) is to make sure the cage mesh and final
mesh aren't shared when applying the vertex coordinates to the final
mesh. This can be done more simply though, in a way that avoids
duplicating the final mesh if it already isn't shared.
This works well in some basic tests with different modifiers. Though
I doubt it was really a bottleneck anywhere, simplifying the modifier
stack internals is always nice.
Differential Revision: https://developer.blender.org/D15814
Push the const usage a bit further for compositor nodes, so that they
are more explicit about not modifying original nodes from the editor.
Differential Revision: https://developer.blender.org/D15822
If the RNA path of a Single Property variable goes through a pointer
to a different ID, the property should be attached to that ID using
the owner reference in the RNA pointer. This already happened when
building some, but not all of the relations and nodes.
This patch fixes the remaining cases.
Differential Revision: https://developer.blender.org/D15323
The viewport compositor crashes when it is disabled then enabled after
the compositor node tree is edited.
This happens because the compositor engine uses the view_update callback
of the draw engine type to detect changes in the node tree and reset its
state for future evaluation. However, the draw manager only calls the
view_update callback for enabled engines, so the compositor never
receives the needed updates to properly reset its state and then crashes
at draw time.
This patch call the view_update callback for all registered engines
regardless if they are enabled or not, that way, they always receive
the potentially important updated needed to maintain a correct state.
Aside from the compositor engine, this change affects the EEVEE and
Workbench engines because they are the only engines that utilizes this
callback. However, both of them only reset a flag that is checked at
draw time. So the change should have no side effects. For the EEVEE
engine, we just add a null check in case it was not instanced, while
Workbench already have the appropriate null check.
Differential Revision: https://developer.blender.org/D15821
Reviewed By: Clement Foucault
This patch moves material indices from the mesh `MPoly` struct to a
generic integer attribute. The builtin material index was already
exposed in geometry nodes, but this makes it a "proper" attribute
accessible with Python and visible in the "Attributes" panel.
The goals of the refactor are code simplification and memory and
performance improvements, mainly because the attribute doesn't have
to be stored and processed if there are no materials. However, until
4.0, material indices will still be read and written in the old
format, meaning there may be a temporary increase in memory usage.
Further notes:
* Completely removing the `MPoly.mat_nr` after 4.0 may require
changes to DNA or introducing a new `MPoly` type.
* Geometry nodes regression tests didn't look at material indices,
so the change reveals a bug in the realize instances node that I fixed.
* Access to material indices from the RNA `MeshPolygon` type is slower
with this patch. The `material_index` attribute can be used instead.
* Cycles is changed to read from the attribute instead.
* BMesh isn't changed in this patch. Theoretically it could be though,
to save 2 bytes per face when less than two materials are used.
* Eventually we could use a 16 bit integer attribute type instead.
Ref T95967
Differential Revision: https://developer.blender.org/D15675
sycl/L0 runtime reports compute-runtime version since Intel graphics
driver 101.3268 on Windows, when querying driver version from sycl.
Prior to this driver, it was 0. Now we can bump minimum requirement to
this one and filter-out devices returning 0.
Maniphest Tasks: T100648
This change makes it so that objects which are temporary hidden from
the viewport (the icon toggle in outliner) do not affect on the
performance of the viewport.
The attached file demonstrates the issue. Before this change hiding
the object does not change FPS, after this change FPS goes high when
the object is hidden.
F13435936
Changing the object temporary visibility is already expected to tag
scene for bases updates, which flushes down the stream to the object
visibility update. So the only remaining topic was to ensure the
graph does a special round of visibility update on such changes.
Differential Revision: https://developer.blender.org/D15813
While it is hard to measure the performance impact accurately, there
is no need to perform per-modifier string lookup on every frame update.
Implemented as an exceptional case in the code which flushes updates to
the entire component. Sounds a bit suboptimal, but there are already
other exception cases handled in the function.
Differential Revision: https://developer.blender.org/D15812
From the 3DView code has basically no knowledge of collection hierarchy,
so we can either not remap any local usage of linked objects that are
being overridden, or remap them in all their local collections.
The second behavior makes most sense in the vast majority of cases.
Note that this was only an issue when directly linking and overriding
objects, not when doing so through collections.
The purpose of `NodeTreeRef` was to speed up various queries on a read-only
`bNodeTree`. Not that we have runtime data in nodes and sockets, we can also
store the result of some queries there. This has some benefits:
* No need for a read-only separate node tree data structure which increased
complexity.
* Makes it easier to reuse cached queries in more parts of Blender that can
benefit from it.
A downside is that we loose some type safety that we got by having different
types for input and output sockets, as well as internal and non-internal links.
This patch also refactors `DerivedNodeTree` so that it does not use
`NodeTreeRef` anymore, but uses `bNodeTree` directly instead.
To provide a convenient API (that is also close to what `NodeTreeRef` has), a
new approach is implemented: `bNodeTree`, `bNode`, `bNodeSocket` and `bNodeLink`
now have C++ methods declared in `DNA_node_types.h` which are implemented in
`BKE_node_runtime.hh`. To make this work, `makesdna` now skips c++ sections when
parsing dna header files.
No user visible changes are expected.
Differential Revision: https://developer.blender.org/D15491
This checks for the availability of `gl_BaseInstanceARB` or equivalent.
Disabling for any workaround that disables shader_image_load_store_support
as a preventive measure.
The case when the query uv is almost on an edge but outside of any
triangle was handled before. Now the case where the query uv is
almost on an edge but inside more than one triangle is handled as well.
I want to add support for PBR materials extension to OBJ, but the way
current I/O code syntax handling was done made it quite cumbersome
to extend the number of MTL textures/parameters.
Simplify all that by removing FormatHandler template on "syntax"
that gets routed through keyword enums, and instead just have
simple `write_obj_*` and `write_mtl_*` functions.
Simplify MTLMaterial to not contain a map of textures (that is always
fully filled with all possible textures), instead now there's
a simple array. Rename `tex_map_XX` to `MTLTexMap`.
All this does not affect behavior or performance, but it does result
in 170 fewer lines of code, and saves a couple kilobytes of executable
size.
While missing the break before a default that only breaks isn't
an error, it means adding new cases needs to remember to add the
break for an existing case, changing the default case will also
result in an unintended fall-through.
Also avoid `default:;` and add an explicit break.
When 'm_render_target' was NULL, backbuffer_res would be used without
being assigned. While it seems likely this code-path is rarely used
(if at all), resolve the logical error.
Introduced in [0], checking the logic here, there seems to be no reason
a press event should ever run release logic, relocate break statement.
In practice this was unlikely to cause problems as peeking into press
events would need to fail, peeking into release would need to succeed.
Even so, better avoid accidental fall through in switch statements.
[0]: 6f158f834d
This patch is a response to T92588 and is implemented
as a Function/Shader node.
This node has support for Float, Vector and Color data types.
For Vector it supports uniform and non-uniform mixing.
For Color it now has the option to remove factor clamping.
It replaces the Mix RGB for Shader and Geometry node trees.
As discussed in T96219, this patch converts existing nodes
in .blend files. The old node is still available in the
Python API but hidden from the menus.
Reviewed By: HooglyBoogly, JacquesLucke, simonthommes, brecht
Maniphest Tasks: T92588
Differential Revision: https://developer.blender.org/D13749
When creating a curves data-block, one is expected to set the new
position values. We can slightly improve performance by avoiding
doing that redundantly.
Similar to cccc6d6905.
The "write_only" (i.e. no reading) API function expects the caller to
set values for all new attribute elements, so using calloc or setting
the default value first is redundant. In theory this can improve
performance by avoiding an extra pass over the array. I observed a
6% improvement in a basic test with the mesh to points node:
from 47.9ms to 45ms on average.
See 25237d2625 for more info.
Similar to cccc6d6905.
In all these cases, it was clear that the layer values were set right
after the layer was created anyway. So there's no point in using
calloc or setting the values to zero first.
See 25237d2625 for more info.
If a "rest_position" attribute already existed, potentiall with another
type, the next name "rest_position.001" would be used, which might
even conflict with a name on another domain. Use the C++ attribute
API instead, which has more standard/predictable behavior.
This allows the render engine to expect non-overlapping resources in the
generated create info.
Textures are indexed from 0 and up.
Nodetree ubo is bound to slot 0.
Uniform attributes ubo is bound to slot 1.
When allocating new `CustomData` layers, often we do redundant
initialization of arrays. For example, it's common that values are
allocated, set to their default value, and then set to some other
value. This is wasteful, and it negates the benefits of optimizations
to the allocator like D15082. There are two reasons for this. The
first is array-of-structs storage that makes it annoying to initialize
values manually, and the second is confusing options in the Custom Data
API. This patch addresses the latter.
The `CustomData` "alloc type" options are rearranged. Now, besides
the options that use existing layers, there are two remaining:
* `CD_SET_DEFAULT` sets the default value.
* Usually zeroes, but for colors this is white (how it was before).
* Should be used when you add the layer but don't set all values.
* `CD_CONSTRUCT` refers to the "default construct" C++ term.
* Only necessary or defined for non-trivial types like vertex groups.
* Doesn't do anything for trivial types like `int` or `float3`.
* Should be used every other time, when all values will be set.
The attribute API's `AttributeInit` types are updated as well.
To update code, replace `CD_CALLOC` with `CD_SET_DEFAULT` and
`CD_DEFAULT` with `CD_CONSTRUCT`. This doesn't cause any functional
changes yet. Follow-up commits will change to avoid initializing
new layers where the correctness is clear.
Differential Revision: https://developer.blender.org/D15617
Issue arises when face areas are really large combined with small UV
areas (report has a mesh ~1.5 km), then precission of shorts is
insufficient.
Now use floats instead.
This also removes this negative signed version of the total area ratio
(since with floats it is no longer used).
Thx @brecht for a lot of hand-holding!
NOTE: this is an alternative to D15805 (and quick tests show this does
not introduce the tiny performance hit as D15805 did).
Maniphest Tasks: T93084
Differential Revision: https://developer.blender.org/D15810
Using the same `GeometryComponentFieldContext` for all situations,
even when only one geometry type is supported is misleading, and mixes
too many different abstraction levels into code that could be simpler.
With the attribute API moved out of geometry components recently,
the "component" system is just getting in the way here.
This commit adds specific field contexts for geometry types: meshes,
curves, point clouds, and instances. There are also separate field input
helper classes, to help reduce boilerplate for fields that only support
specific geometry types.
Another benefit of this change is that it separates geometry components
from fields, which makes it easier to see the purpose of the two concepts,
and how they relate.
Because we want to be able to evaluate a field on just `CurvesGeometry`
rather than the full `Curves` data-block, the generic "geometry context"
had to be changed to avoid using `GeometryComponent`, since there is
no corresponding geometry component type. The resulting void pointer
is ugly, but only turns up in three places in practice. When Apple clang
supports `std::variant`, that could be used instead.
Differential Revision: https://developer.blender.org/D15519
Before 8c25889bb6, subsurf face center tags were stored in each
vertex, so they were always copied to duplicate meshes. Now they are
stored in runtime data though, so they need to be copied explicitly.
The function name "reset_on_copy" is a bit awkward here, so the
tags are copied by the caller.
Actually, when you increase the thickness of the stroke in the outline conversion, the shape of the stroke changes and becomes thicker.
This commit includes a new algorithm to correct this problem. A new `Keep Shape` parameter allows you to disable it because, for artist reasons, it may be good to keep the old algorithm and change the shape.
- PALETTE_OT_color_add: crashed without a brush.
- SCREEN_OT_actionzone: crashed without a window.
- PREFERENCES_OT_studiolight_show: exception when opening prefs failed.
These functions used the term "find", which makes it sound like a lookup
callback, when in fact it would add elements to a set for further
processing. So use "collect" instead.
The slide brush requires attachment information on the curves.
Now a warning is shown instead of crashing Blender. The attachment
information can be generated by executing the
`Curves > Snap to Nearest Surface` operator.
EEVEE-Next passes were rendered to the render result, but didn't appear
in the compositor. Reasoning is that when a render engine has the update
render passes callback registered it would not register any default
render passes. This callback is used to update the Render Layer node.
This patch implements the callback for EEVEE-Next with the render passes
that are already available. In the future the callback should be
extended. Note that AO/SHADOW render passes have been disabled for now
as they need to be converted to color buffers.
Instead to use always a value of 1, now the thickness of the stroke perimeter can be set.
This thickness is added to the original perimeter, so using a big number can increase the global thickness of the stroke.
These functions that retrieve strings from assets return stringrefs.
Storing them as std::strings is unnecessary and relies on binding to
the const references.
If these layers didn't exist on the original mesh, they would be created
from scratch and transferred anyway. That is inefficient because all the
work is pointless, and because creating these layers could slow down
subsequent sculpt operations.
It's possible for misbehaving scripts written before 3.3 to reach
this state and crash Blender. With this change, the error is reduced
to a Python exception.
Differential Revision: https://developer.blender.org/D15724
If reroute node lies in side the frame node boundaries then set
frame node as the parent of reroute.
Differential Revision: https://developer.blender.org/D15739
If reroute node lies in side the frame node boundaries then set
frame node as the parent of reroute.
Differential Revision: https://developer.blender.org/D15739
Same as other build options, don't make it a hard requirement to have
Wayland libraries installed when it gets enabled by default.
Also fixes wayland-protocols not being found on the buildbot.
This allows individual users or Linux distributions to specify a directory
Cycles will automatically look for the OptiX include folder, to compile kernels
at runtime.
It is still possible to override this with the OPTIX_ROOT_DIR environment
variable at runtime.
Based on patch by Sebastian Parborg.
Ref D15792
This is a more C++ friendly version MEM_calloc_arrayN, like MEM_cnew is for
MEM_callocN. For cases where data structures are still C and Vector or Array
don't work.
OpenVDB crashes when the determinant of the grid transformation is
too small. The solution is too detect when the determinant is too small
and to replace the grid with an empty one. If possible the translation
and rotation of the grid remains unchanged.
Differential Revision: https://developer.blender.org/D15806
Those strings were at least partly disambiguated:
- Area
- Zone
- Measurement
- Ease
- BBone Ease In / Out
- Back
- Camera BG image depth
- GP interpolate sequence
- Edge Crease
- Theme
- Jitter
- Brush
- GPencil
- Lens distorsion compositing node
- Cineon color management
- Black
- Gamma
- White
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15791
The structures in rna_mesh.c all had a UI text which showed up in the
animation editors, except for MeshUVLoop.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15803
Translate:
- new group socket names
- default names Input and Output
- on connecting a link from another node
- new geometry nodes input and output socket names
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15763
The info provided by add-ons is very valuable to users, yet it wasn’t translatable yet.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15747
Weight and Vertex paint don't change coordinates and thus don't need
crazyspace data, which allows using coordinates from normal evaluated
meshes.
Since painting uses original topology, the deform only mesh is used,
but if the fully evaluated mesh has the same topology, it is preferred.
This is useful because not only Geometry Nodes, but even simple weight
computation modifiers are excluded from the deform only mesh evaluation.
Differential Revision: https://developer.blender.org/D15501
This new option converts the stroke to outline perimeter as soon as is drawn.
If no alternative material is set, the actual material is used.
The algorithm is similar to the new operator in D15664
Reviewed By: pepeland
Differential Revision: https://developer.blender.org/D15738
Previously the base virtual array implementation optimized for
common cases where data is stored as spans or single values.
However, that didn't make sense when there are already
sub-classes that handle those cases specifically. Instead,
implement the faster materialize methods for each class.
Now, if the base class is reached, it means no optimizations
for avoiding virtual function call overhead are used.
Differential Revision: https://developer.blender.org/D15549
When the curve type attribute doesn't exist, there is no reason to
create an array for it only to fill the default value, which will add
overhead to subsequent "add" operations. I added a "get_if_single"
method to virtual array to simplify this check. Also use the existing
functions for filling curve types.
Differential Revision: https://developer.blender.org/D15560
Our convention is to use `INC_*` for include directories,
this caused `make check_cmake` to incorrectly fail as it expected
these files to be include directories.
Since [0] notifiers were cleared and left in the queue, while harmless
it meant the call to remove the notifier from the set was redundant.
Now set aside a category to tag notifiers as having been cleared and
skip them entirely.
[0]: 0aaff9a07d
Regression in recent fix for T66088 [0]. caused by much older problem
introduced with [1] & [2].
Unlike other platforms, as of [1] GHOST/Win32 was keeping track of the
pressed modifier keys.
Since GHOST/Win32 cleared the modifier state on window activation [2]
and only changes to modifier state would generate key events, activating
the window and releasing the modifier would not send the release event.
Resolve this by removing the stored modifier state from GHOST/Win32,
always passing modifier press/release events through to Blender
(matching other GHOST back-ends).
Instead, use key-repeat detection to prevent repeated modifier keys
from being generated - an alternate solution to T26446.
[0]: 8bc76bf4b9
[1]: d6b43fed31
[2]: 6b987910e4
With rBe6a557952ead, concerns were reported about missing updates when
the view is moved other than through the Edge Pan system.
Although the transform operator blocks navigation in general, it is
good to avoid these cases.
The view offset, calculated by the Edge Pan system, only affects the
position of the nodes, but forget to update:
- snapping data
- final value of transform
- values used for custom drawing
Therefore, to avoid having to update a lot of scattered data, the
`transformViewUpdate` utility has been implemented to recalculate input
values when the view changes.
This utility does more than is necessary to fix the bug, but with that,
it can work in any situation.
The view offset, calculated by the Edge Pan system, only affects the
position of the nodes, but forget to update:
- snapping data
- final value of transform
- values used for custom drawing
Therefore, to avoid having to update a lot of scattered data, the
`transformViewUpdate` utility has been implemented to recalculate input
values when the view changes.
This utility does more than is necessary to fix the bug, but with that,
it can work in any situation.
The function does modify the object since it changes the name of a layer
it owns. Ideally this wouldn't be possible, but raw pointers don't have
ownership semantics so this is a common problem with CustomData.
The calculation was revised to address two issues:
* Discontinuities occurring when detail was a non-integer greater than 2.
* Levels of detail in the interval [0,1) repeating the levels of detail in
the interval [1,2).
This fixes Cycles, Eevee and geometry nodes.
Differential Revision: https://developer.blender.org/D15785
The blendfile_liblink and blendfile_io python tests in debug fired an
assert that WMWinMan object was in Main database, but not in the ID
name map. This was caused by wm_window_match_do going into case 3
there: the new WM list is completely empty, the old list is not empty,
and it was directly using the old/current list (via
wm_window_match_keep_current_wm function), without actually
registering/validating the objects in it through the name map.
Reviewed By: Bastien Montagne
Differential Revision: https://developer.blender.org/D15787
The blendfile_liblink and blendfile_io python tests in debug fired an
assert that WMWinMan object was in Main database, but not in the ID
name map. This was caused by wm_window_match_do going into case 3
there: the new WM list is completely empty, the old list is not empty,
and it was directly using the old/current list (via
wm_window_match_keep_current_wm function), without actually
registering/validating the objects in it through the name map.
Reviewed By: Bastien Montagne
Differential Revision: https://developer.blender.org/D15787
While converting types from callbacks isn't a bug, it's unlikely
we ever want to do this on purpose and can hide mistakes such as
silently converting floating point values to ints as happened
with Sequencer.frame_start.
Those collections were so far mainly just tagged as fake user (even
though a few places in code already incremented usercount on them).
Since we now clear the fakeuser flag when linking/appending data, ensure
that these collections are preserved by making these usages regular ID
refcounting ones.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D15783
Commit is not working as expected in some cases, as revealed by
liboverride testcase entering infinite loop.
Code needs some more thinking.
This reverts commit ee7bd79b54.
Usually, when overriding collections, the linked reference ones are
removed from the ViewLayer, and the overrides replace them.
This change to `layer_collection_sync` code makes it so that in case
there is a free viewlayer hierarchy matching the linked collection, it
gets re-used for the override one, instead of re-creating everything
from scratch.
To achieve this, resync process is split into two steps, first regular
collections are processed, then the override ones. This should ensure
an override does not steal the layers of its reference if the later is
still instantiated in the view layer.
Since rBb100bdca25b1 the parent inverse was always reset in
ED_object_parent (also for just changing the parent type).
This does make sense (since there is no point keeping it when e.g
changing from "Bone" to "Object" or "Vertex" to "Object", for this to
really make sense it would have to be properly recalculated anyways
which does not happen afaict).
The reported issue was that setting the prop to the same value as it was
before (e.g. from "Object" to "Object") would still reset the parent
inverse which was really unexpected since from a user standpoint,
nothing has changed here.
So in case the value does not really change, we now just early out and
skip `ED_object_parent`.
Maniphest Tasks: T100599
Differential Revision: https://developer.blender.org/D15771
Return faces instead of face indices from bmesh_linked_uv_islands
since BMesh indices aren't reliable when geometry is added/removed,
where the faces will still be valid.
Added [0] which notes in most cases results are the same but in some
cases the result seems better. While true at the time of writing since
then mat3_to_quat has been improved and used for nearly all matrix
to quaternion conversion.
0: 876cfc837e
Making the callers responsible for this isn't practical as matrices are
often passed indirectly to a functions such as mat3_to_axis_angle,
BKE_object_mat3_to_rot & BKE_pchan_mat3_to_rot.
Or the matrix is combined from other matrices which could be negative.
Given quaternions calculated from negative matrices are completely
invalid and checking only needs to negate matrices with a negative
determinant, move the check into mat3_to_quat and related functions.
Add mat3_normalized_to_quat_fast for cases no error checking on the
input matrix is needed such as blending rotations.
With C++ we should transition towards namespaces to avoid naming
collisions. Having the namespace in place is the first step for that
transition.
Plus, the `typedef` isn't necessary for struct/class/enum definitions
in C++, so avoid the verbosity it adds.
Inconsistencies in update/tagging code between different code doing the
same 'Clear. liboverride operation lead to crashes in some cases.
Unify deg tagging and WM notifiers accross the three editor-level
codepaths performing the common Make/Reset/Clear operations.
Preserve if possible the active object accross Clear operation.
Several cleanup/rename/re-arangement of code to make it more consistent.
Fix typo in blender_release.cmake, and ensure that "make release" still works
when ocloc is not available. While a fatal error is useful for debugging, the
current convention is to disable features, especially in cases like this where
there is no simple way to make the feature work.
Differential Revision: https://developer.blender.org/D15774
Mistake in own rBc76d7f7bde35.
Happened when no image was set in the Image Editor already (which is now
checked for).
Maniphest Tasks: T100590
Differential Revision: https://developer.blender.org/D15761
Use a more direct method of checking if a matrix is negative instead of
using cross & dot product.
Also replace some determinant_m3() < 0 checks with is_negative_m3.
The result of mat3_normalized_to_quat isn't valid for negative matrices.
Isolate the fix to the Matrix.to_quaternion() instead of changing
mat3_normalized_to_quat to prevent unintended side effects elsewhere.
Caused by 2480b55f21 using the undo step indices instead of the
indices of vertices in the mesh, causing the hide values to be swapped
around randomly in the mesh.
The number of attribute domains isn't an attribute domain, so storing
ATTR_DOMAIN_NUM in a variable with an eAttrDomain type isn't correct.
In the cases it was used, the value wouldn't be accessed anyway.
PLATFORM_BUNDLED_LIBRARIES gathers shared libraries that will be installed
to the lib/ folder. The Blender executable gets a relative rpath pointing to
this folder as part of the install step.
The build rpath is different and uses absolute paths, so that it works for
executables like tests that are in different locations, and to support the
case where the build and install folders are different.
The system is already used for the OpenMP library on macOS. But on Linux it
will only kick in once we start using shared libraries for dependencies.
This also removes Mesa libraries from the old location, as these would cause
Blender to start with software OpenGL.
Ref T99618
Invalidate depsgraph.object_instances when freed, this resolves a crash
when accessing the object instances after iteration has finished.
Unlike most other collections, object_instances is only valid while the
iterator is in-memory.
The Python/RNA API needs to inline int/string collection lookups so the
Python instance can be created before the iterator ends.
Reviewed By: mont29, sergey
Ref D15755
This is done by checking the number of bitplanes from the image buffer.
We assume that for float buffer to use the same bitplanes as it was a
byte buffer.
Then, the data of the image buffer is packed at the start of the `rect` or
`float_rect` before upload.
**Statistics - einar.v004.blend **
Note that not all grayscale textures have been stored as BW images so the
amount of memory that can be reduced would be more.
Without patch
```
104 Textures - 3294.99 MB (3294.47 MB over 32x32), 37 RTs - 192.52 MB.
Avg. tex dimension: 2201.88x1253.51 (2283.53x2202.13 over 32x32)
464 Buffers - 25.01 MB total 1.24 MB IBs 23.50 MB VBs.
3512.52 MB - Grand total GPU buffer + texture load
```
Patch applied
```
104 Textures - 2917.66 MB (2917.14 MB over 32x32), 39 RTs - 215.45 MB.
Avg. tex dimension: 2221.38x1252.75 (2323.28x2253.47 over 32x32)
467 Buffers - 25.01 MB total 1.24 MB IBs 23.51 MB VBs.
3158.13 MB - Grand total GPU buffer + texture load.
```
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D15484
Since {rB2542fda14d85}, `r_node` is an unused parameter.
Changed `load_texture_image` to reflect that.
Differential Revision: https://developer.blender.org/D15759
Main motivation is from T54314 where there was no way to read from a
Viewer image datablock after setting another viewer node active.
Part of the problem was addressed in rB16d329da284c (where handlers for
the compositing background job were added so that you can act after the
compositor has run), however there was still the remaining issue that
setting another viewer node active would not properly tag the node
NODE_DO_OUTPUT. This forced users into a complicated workaround (using
switch nodes feeding into a single viewer node).
Now handle NODE_DO_OUTPUT properly in RNA, too, and do proper updates so
that behavior from RNA matches that of the Node Editor when setting a
viewer node active.
ref T54314.
Reviewed By: JacquesLucke
Maniphest Tasks: T54314
Differential Revision: https://developer.blender.org/D15203
When changing the frame_number of a grease pencil frame, the grease
pencil object is not updated correctly. The frame stays where it
previously was.
The fix adds a `property_update` callback to the `frame_number` RNA
property.
Maniphest Tasks: T99524
Reviewed By: antoniov
Differential Revision: https://developer.blender.org/D15394
This makes workspaces more translatable:
- New Workspace menu
- header
- preset menus
- preset entries
- workspace names upon factory file template load
- new workspace name upon workspace addition
To properly translate those names, an extraction function for
workspace names from app templates was added as well.
(Do not do anything when loading a user-saved file!)
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15727
This was the case when the "Show in Editmode" option was used and a
vertexgroup affected the areas.
Probably an oversight in {rBdeaff945d0b9}?, seems like deforming
modifiers always need to call `BKE_mesh_wrapper_ensure_mdata` in
`deformVertsEM` when a vertex group is used.
Maniphest Tasks: T100578
Differential Revision: https://developer.blender.org/D15756
Since {rBb0cb0a785475}, changing the active texture in the Node Editor
would also change the current image in the Image Editor.
While this was an overall improvement, this was not desired when the
image currently looked at was a `Render Result` or a `Viewer Node`
(artists usually want to keep focus on these).
With this patch, syncing the active texture change from the Node Editor
to the Image Editor will now only happen if the Image Editor's current
image is not a Render Result or a Viewer Node.
NOTE: Syncing the active paint slot to the Image Editor still happens
(even if the Image Editor's current image is not a Render Result or a
Viewer Node), behavior was not changed since this is a much more
explicit action while texture painting and probably desired in that
case.
Maniphest Tasks: T99493
Differential Revision: https://developer.blender.org/D15749
The realtime compositor sometimes produces fuzzy results when the
interpolation is set to bilinear. This was due to the domain realization
shader, which incorrectly sampled the input image.
This patch fixes such fuzziness by introducing a 0.5 offset to evaluate
the sampler at the center of pixels. Additionally, it makes sure the
centring offset is an integer offset by taking its floor, retaining the
previous 0.5 offset even with the difference in size is odd.
Add missing labels, and also add tooltips.
Unfortunately there is no way currently to extract two messages from a
single 'function' call, so unless those type of macros become very
widely used, would keep it as manual tagging.
Also disambiguate `case` in text context, pretty sure English is one of
the very rare languages to use this word for character case too.
- Keying (keyframe insertion)
- Roughness (particle children)
- New image, collection, text (in menus)
- Parents (particles)
- Wrap (text)
- Light (add menu)
- Empty (volume add menu)
- Empty (empty add menu)
- Cycles (f-curve modifier)
- Drag (workspace tool type)
- Power (light intensity)
- Power (math nodes)
This last change also moves all math operations in nodes to the
ID_nodetree context. It's needed only for some operations, but we
can't be more granular here.
Also...
- Fix context extraction for interpolation mode headers in F-Curves
and GPencil interpolation operator
- Enable new translation: "Slot %d" in image editor
- Fix an English message in the node editor:
"Replace the input image's alpha channels by..." -> channel
Ref. T43295
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15694
`UI_context_active_but_prop_get_templateID` became much more widely used
with recent rBfec254364884, which revealed that it did not do any check
on actual type of data it accesses, resulting easily in undefined
behavior.
Now also check the callback function pointer, this should be safe
enough.
Patch by @Severin (Julian Eisel), many thanks!
There was a memory leak in the GPU code generator for the compositor
output. It was just due to a missing free in the GPU code generator
destructor, so this patch makes sure it is freed.
This fixes a compilation error in eevee_light_culling_debug shader.
Some compilers complained when accessing the same data twice. Unclear
why. We should investigate that this change doesn't harm the performance
of the shader.
Although the light is a local variable it might clutter available
registers. If so it will harm developers during debugging.
Due to a copy-paste error there was an out of bound read. Some drivers
didn't complain about it, others did. This patch fixes the compilation
error by accessing the array within bounds.
Imeplemented **ViewLayer.aovs.remove** by Adding a new rna function to call the internal **BKE_view_layer_remove_aov**, removed assert from **BKE_view_layer_remove_aov**.
Reviewed By: jbakker
Maniphest Tasks: T99259
Differential Revision: https://developer.blender.org/D15341
Restore old hitbox for connecting links to sockets.
Commit rBd9d97db018d2 improved the node socket snapping when nodes
are close together by decreasing the tolerance around the cursor when
checking for nodes in front, that might occlude the socket.
In doing so it also reduced the hitbox of the node socket itself that
extended outside of the node.
This commit restores the old node socket hitbox while keeping the
improved behavior when nodes are close together with the following
changes:
1) When looking for the socket under the cursor, iterate through the
nodes front to back, which prioritizes node sockets in the foreground.
2) Instead of checking for another node underneath the cursor it checks
if the socket is actually occluded by another node.
The way the occlusion test for sockets is tweaked you can now connect to
sockets that are only partially occluded, which is a bit more forgiving
than previously.
Reviewed By: Hans Goudey
Differential Revision: http://developer.blender.org/D15731
Restore old hitbox for connecting links to sockets.
Commit rBd9d97db018d2 improved the node socket snapping when nodes
are close together by decreasing the tolerance around the cursor when
checking for nodes in front, that might occlude the socket.
In doing so it also reduced the hitbox of the node socket itself that
extended outside of the node.
This commit restores the old node socket hitbox while keeping the
improved behavior when nodes are close together with the following
changes:
1) When looking for the socket under the cursor, iterate through the
nodes front to back, which prioritizes node sockets in the foreground.
2) Instead of checking for another node underneath the cursor it checks
if the socket is actually occluded by another node.
The way the occlusion test for sockets is tweaked you can now connect to
sockets that are only partially occluded, which is a bit more forgiving
than previously.
Reviewed By: Hans Goudey
Differential Revision: http://developer.blender.org/D15731
Fix possibility of getting invalid fixed-pitch advance size.
See D15735 for more details.
Differential Revision: https://developer.blender.org/D15735
Own Code.
When displaying the Hierarchies view of the Library Overrides display
mode in a specific Heist production file, Blender would become
unresponsive for about 30 seconds and every redraw in the Outliner would
lag noticably. Issue is that the sum of hierarchy elements is multiple
thousands, and that really brings the Outliner to its knees. I've looked
into some improvents and committed a few minor ones already, but it
seems it's really the big sum of elements causing the issue. There
doesn't appear to be a single bottle-neck.
To work around this, "lazy build" children, so that children of
collapsed elements are not actually created. This brings the tree
building down to some tens of miliseconds, and redrawing becomes
rather lag-free again, even with big parts of the tree un-collapsed.
Problem: Searching still needs to build the entire tree, so it's
essentially unusable right now. Should we disallow searching
altogether?
Makes the lazy-building (where children are only built when the parent
isn't collapsed) more generic, so more display modes can use it. So far
this was hardcoded for the "Data API" display mode.
This will be used to work around a big performance issue with the
Library Overrides Hierachies view in a complex production file, see
following commit.
When displaying the Hierarchies view of the Library Overrides display
mode in a specific Heist production file, Blender would become
unresponsive for about 30 seconds and every redraw in the Outliner would
lag noticably. Issue is that the sum of hierarchy elements is multiple
thousands, and that really brings the Outliner to its knees. I've looked
into some improvents and committed a few minor ones already, but it
seems it's really the big sum of elements causing the issue. There
doesn't appear to be a single bottle-neck.
To work around this, "lazy build" children, so that children of
collapsed elements are not actually created. This brings the tree
building down to some tens of miliseconds, and redrawing becomes
rather lag-free again, even with big parts of the tree un-collapsed.
Problem: Searching still needs to build the entire tree, so it's
essentially unusable right now. Should we disallow searching
altogether?
Makes the lazy-building (where children are only built when the parent
isn't collapsed) more generic, so more display modes can use it. So far
this was hardcoded for the "Data API" display mode.
This will be used to work around a big performance issue with the
Library Overrides Hierachies view in a complex production file, see
following commit.
This container is type safe and contains a few nice optimizations,
although they shouldn't make a big difference here in practice. The
hashing now uses our default hashing method which reduces code
complexity and seems to perform slightly better in my tests.
For a Heist shot with a highly complex library overrides hierarchy in
the Outliner this reduces the tree building time from around 25 to 23.6
seconds here. However the main design change for performance is yet to
come, all this is just general code refactoring (which at least
shouldn't make performance worse).
Based on the paper "Practical Hash-based Owen Scrambling" by Brent Burley,
2020, Journal of Computer Graphics Techniques.
It is distinct from the existing Sobol sampler in two important ways:
* It is Owen scrambled, which gives it a much better convergence rate in many
situations.
* It uses padding for higher dimensions, rather than using higher Sobol
dimensions directly. In practice this is advantagous because high-dimensional
Sobol sequences have holes in their sampling patterns that don't resolve
until an unreasonable number of samples are taken. (See Burley's paper for
details.)
The pattern reduces noise in some benchmark scenes, however it is also slower,
particularly on the CPU. So for now Progressive Multi-Jittered sampling remains
the default.
Differential Revision: https://developer.blender.org/D15679
As mentioned in T89399, "the source of this bug is that cursor wrap
moves the cursor, but when it later checks the mouse position it hasn't
yet been updated, so it re-wraps".
As far as I could see, this happens for two reasons:
1. During the first warp, there are already other mousemove events in the queue with an outdated position.
2. Sometimes Windows occasionally and inexplicably ignores `SetCursorPos()` or `SendInput()` events. (See [1])
The solution consists in checking if the cursor is inside the bounds right after wrapping.
If it's not inside, it indicates that the wrapping either didn't work or the event is out of date.
In these cases do not change the "accum" values.
1. f317d619cc/src/video/windows/SDL_windowsmouse.c (L255))
Maniphest Tasks: T89399
Differential Revision: https://developer.blender.org/D15707
The realtime compositor crashes when some nodes are unlinked.
This happens for GPU material nodes if it was compiled into its own
shader operation. Since it is unlinked, the shader operation will have
no inputs, a case that the current code didn't consider.
This patch fixes this by skipping code generation for inputs if no
inputs exist for the shader operation.
- Use upper-case for defines.
- Use u-prefix for unsigned types.
- Use snake case for struct members.
- Use const struct for unicode_blocks & arguments.
- Use doxy style comments for struct members.
- Add doxy sections for recently added code.
- Correct code-comments (outdated references).
- Remove 'e' prefix from struct UnicodeBlock/FaceDetails
(normally used for enums).
Use `inline constexpr` instead of `static constexpr` to prevent these
variables from being duplicated in each translation unit that includes
the BLI_any.hh header.
Differential Revision: https://developer.blender.org/D15698
Change `cd_loop_uv_offset` from signed to unsigned, forcing
a crash if passed invalid input.
Differential Revision: https://developer.blender.org/D15722
This function never succeeded as an off by one error checking the last
character always indexed the null byte.
The 'for' loop was broken as of [0] since the unsigned number could wrap
around with some RNA paths causing out of bounds memory access.
This is an example where tests would have caught the problem early on,
RNA path tests are planned as part of D15558.
[0]: 11b4d0a3c3
Gamma correction for glyph coverage values.
See D13376 for details and examples.
Differential Revision: https://developer.blender.org/D13376
Reviewed by Julian Eisel
- Turn storage into an object with "automatic" memory management (RAII)
so freeing is implicit and reliable.
- Turn functions into member functions, to have the data and its
functions close together with controlled access that increases
encapsulation and hiding implementation details.
- Use references to indicate null is not an expected value.
- Related minor cleanup (comments, use const etc.)
Couldn't spot any changes in performance.
This way you can benchmark the tree rebuilding by simply commenting out
a single line. Not that it was difficult before, but this makes it as
easy as it gets, with basically no knowledge of existing benchmarking
tools required.
Simplifies code quite a bit, since this was doing the typical work of
such a container. I may remove this vector entirely as I'm working on
performance fixes, not sure, but simplifying this helps reason about the
design.
Couldn't spot performance differences in some benchmarks, and I wouldn't
expect any. Maybe some minor onces thanks to the small buffer
optimization of `blender::Vector`.
- Use C++ nullptr instead of C's NULL (clang-tidy warns otherwise)
- Use early exit/continue to avoid indentation (helps readability
because visual scope of no-op branches is minimized).
- Use const for local variables, to separate them clearly from the
mutable ones.
- Avoid struct typedef, this is not needed in C++
This gave a 1.1x speedup, however also leads to very long compile times
that make it seems like Blender has stopped working.
This can be brought back in the future behind an option that users can
explicitly enabled.
Fix T100102
Ref D14923, D14763, T92212
We only need to 'manually' remap RNA ID pointer property to the newly
created override if the owner itself was not already a local override.
Also some more minor tweaks to notifiers sent when creating the
override.
This patch implements the bilateral blur node for the realtime compositor.
Differential Revision: https://developer.blender.org/D15674
Reviewed By: Clement Foucault
This patch implements the despeckle node for the realtime compositor.
Differential Revision: https://developer.blender.org/D15673
Reviewed By: Clement Foucault
This operator converts any stroke of gpencil with a center line into a stroke with the perimeter.
It's possible to assign the active material, keep current or create a new material for all perimeters.
The conversion is only done for strokes with a material using `Stroke`. Only `Fill` strokes are not converted.
Known issues: As the perimter has not boolean implementation, some perimeters can be overlaped. This could be solved in the future when a new 2D boolean library will be developed.
Reviewed By: mendio, pepeland, frogstomp
Differential Revision: https://developer.blender.org/D15664
Assigning to RNA ID pointer properties will not _always_ trigger a
rebuild of the outliner tree, so try to enforce this when actually
creating overrides.
This introduces a new `UI_MT_button_context_menu` class which is
registered at startup. Addons can append/prepend draw functions to this
class, in order to add their custom context menu entries.
The new class replaces the old `WM_MT_button_context` class, thus
requiring a small change in addons using this feature. This is done
because addons were previously required to register the class
themselves, which caused addons to override each other's context menu
entries.
Now the class registration is handled by Blender, and addons need only
append their draw functions. The new class name ensures that addons
using the old method don't override menu entries made using the new
class.
Menu entries added with the legacy `WM_MT_button_context` class are
still drawn for backwards compatibility, but this class must not be used
going forward, as any addon using it still runs the risk of having its
menu entries overridden, and support for the legacy class is subject to
removal in a future version.
Reviewed By: campbellbarton
Maniphest Tasks: T100423
Differential Revision: https://developer.blender.org/D15702
Case where object was directly linked and not owned by a linked
collection was not properly handled, added some level of support for it
now.
Note that the behavior may not always be ideal in cases where the linked
object would be linked in many different local collecitons, hard to get
best solution always from this Editor given limited hierarchy data
available here.
This patch implements the directional blur node for the realtime compositor.
Differential Revision: https://developer.blender.org/D15672
Reviewed By: Clement Foucault
This patch implements the filter node for the realtime compositor.
Differential Revision: https://developer.blender.org/D15661
Reviewed By: Clement Foucault
This patch implements the bokeh image node for the realtime compositor.
Differential Revision: https://developer.blender.org/D15660
Reviewed By: Clement Foucault
Use a GSet to check for duplicate notifiers, for certain Python scripts
checking for duplicate notifiers added considerable overhead.
This is an alternative to D15129 with fewer chances to existing logic.
The offending line was attempting to artificially add width to the
length of the string in order to "avoid ellipsing text that nearly
fits". The line doesn't actually appear to do anything beneficial, and
it causes the nasty text bug.
Old:
{F13029695}
New:
{F13327308}
Reviewed By: campbellbarton
Ref D15585
Instead of using macros like GLIBC we can use the CMake build
systems internal functions to check if some header or functions are
present on the running system's libc.
Add ./build_files/cmake/have_features.cmake to add checks for
platform features which can be used to set defines for source
files that require them.
Reviewed By: campbellbarton
Ref D15696
Since VBO stands for vertex buffer object it should always be uppercase.
"Vertex" in "vertex buffer object" should only be capitalized at the
beginning of a sentence.
Comments there weren't really helpful, took me a while to get what they
try to say. This attempts to add a better explanation. Also add an
assert for a previous, implicit (but commented) assumption, and some
minor cleanups.
Was always creating a copy of `SpaceOutliner`, even though it's only
needed for one conditional branch. This is a shallow copy, so shouldn't
be that expensive, still trivial to avoid.
Metaball, curve, text, and surface objects use the geometry component
system to add evaluated mesh object instances to the dependency graph
"for render engine" iterator. Therefore it is unnecessary to process
those object types in these loops-- it would either be redundant work
or a no-op.
With the ultimate goal of simplifying drawing and evaluation,
this patch makes the following changes and removes code:
- Use `Mesh` instead of `DispList` for evaluated basis metaballs.
- Remove all `DispList` drawing code, which is now unused.
- Simplify code that converts evaluated metaballs to meshes.
- Store the evaluated mesh in the evaluated geometry set.
This has the following indirect benefits:
- Evaluated meshes from metaball objects can be used in geometry nodes.
- Renderers can ignore evaluated metaball objects completely
- Cycles rendering no longer has to convert to mesh from `DispList`.
- We get closer to removing `DispList` completely.
- Optimizations to mesh rendering will also apply to metaball objects.
The vertex normals on the evaluated mesh are technically invalid;
the regular calculation wouldn't reproduce them. Metaball objects
don't support modifiers though, so it shouldn't be a problem.
Eventually we can support per-vertex custom normals (T93551).
Differential Revision: https://developer.blender.org/D14593
This is old code to keep track of an active search element, so you could
step through the search results. This isn't used anymore, and not needed
since searching now filters the tree to only show matches. If we ever
wanted to have support for stepping through elements again, that should be
done via the active element instead.
handle_subversion_warning() was reporting with RPT_ERROR type, replaced
with RPT_WARNING.
RPT_ERROR would stop python scripts opening files written by newer
Blender binary with bpy.ops.wm.open_mainfile(), preventing further code
from running. This does not seem right since Blender itself still loads
the files.
Ran into this checking T100446 in 2.93.
Differential Revision: https://developer.blender.org/D15712
Pressing escape when rendering a viewport animation would
access the freed even and crash (with ASAN enabled).
Always check the context's window before the event as this is a signal
a file was loaded or the window was closed (and it's events freed).
Use an off-screen buffer for the screen-shot operator.
Reading from the front-buffer immediately after calling swap-buffers
failed for GHOST/Wayland in some cases.
While EGL can request to preserve the front-buffer while drawing,
this isn't always supported. So workaround the problem by avoiding
use of the front-buffer entirely.
These macros don't compile in C++ because of taking an address of a
temporary and use of designated initializers. Besides that, using
functions can improve debugging and type safety.
Differentil Revision: https://developer.blender.org/D15693
Implementation of the FreeType 2 cache subsystem, which limits the
number of concurrently-opened FT_Face and FT_Size objects, as well as
caching information like character maps to speed up glyph id lookups.
This time with the option of opening FontBLFs that are not cached.
See D15686 for more details.
Differential Revision: https://developer.blender.org/D15686
Reviewed by Brecht Van Lommel
Commit rBc0845abd897f to 3.4 (master) uses font's filepath without
checking if it exists, therefore crashing on embedded fonts since
they do not have a filepath (loaded from memory).
See D15703 for more details
Differential Revision: https://developer.blender.org/D15703
Reviewed by Brecht Van Lommel
Loopback ID pointers should be ignored here as well, otherwise they are
very efficient at preventing proper detection of 'leaf' override IDs in
a hierarchy.
Adds a pie menu to the File Browser for convenient switching between vertical list, horizontal list and thumbnail view.
Uses the same shortcut as other View pie menus (`ACCENT_GRAVE`).
{F12811673}
Reviewed By: #user_interface, pablovazquez, Severin
Differential Revision: https://developer.blender.org/D13874
* Flip the logic to first detect if we are dealing with an unmodified mesh
in editmode. And then if not, detect if we need a mapping or not.
* runtime.is_original is only valid for the bmesh wrapper. Rename it to clarify
that and only check it when the mesh is a bmesh wrapper.
* Remove MR_EXTRACT_MAPPED and instead check only for the existence of the
origindex arrays. Previously it would sometimes access those arrays without
MR_EXTRACT_MAPPED set, which according to a comment means they are invalid.
Differential Revision: https://developer.blender.org/D15676
A few libraries were updated and a few added.
There are a few depedencies to intel oneAPI which I did not include, since we
refer already to Intel oneAPI already.
This fixes missing selection updates in UV editor, both with GPU subdivision
and with the Modified Edges display option for modifiers in general.
It also fixes the UV editor incorrectly showing the cage mesh with deformed
coordinates. These are not yet supported by the UV selection system.
Changes:
* Always read selection state from the editmesh when building batches. The
flags in the evaluated mesh can be outdated as selection bypasses depsgraph
evaluation for performance, and instead may just clear the batches.
* runtime.is_original is only valid for the bmesh wrapper. The check for
building the UV cage should only use that if the mesh is a bmesh wrapper.
* Don't create cage batches for objects whose mesh is in edit mode, but that
are not themselves in edit mode, there is no need.
Differential Revision: https://developer.blender.org/D15658
This change combines the diffuse/specular light passes into a single texture
array, freeing up an image binding for cryptomatte.
When diffuse/specular light pass and/or requested a
texture array will be allocated. Only when specular light is requested 2 images will always be allocated. This increases the
memory overhead when viewing the specular light renderpass in the viewport. For final rendering it is a common scenario that none
or both are requested.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D15701
Also add new outliner liboverride operators mapping to the manual,
though this is useless currently as this feature is not working in many
part of the UI, including the Outliner contextual menu.
While fixing T100302 (rBd76583cb4a1) I did not realize that the
change in imported vertex order would actually matter. Turns out, it
does for morph targets / mesh shape keys. So redo the fix in a way
that does not change the vertex order. Fixes T100421.
Fix boundary conditions for the Relax UV tool with the Laplacian method.
Add Pinned UV support to Relax UV tool (all modes) and Pinch UV tool.
Differential Revision: https://developer.blender.org/D15669
The original intention from [0] was to force background-mode when built
WITH_HEADLESS or WITH_PYTHON_MODULE, with the else clause setting the
signal handler for Ctrl-C. Since WITH_PYTHON_MODULE now disables all
signal handlers this check no longer makes sense.
[0]: 9d9c05a101
* Fixed crash in debug draw code. Apparently this is
only used by PBVH draw?
* Debug draw code can now be forcibly enabled in release
mode (i.e. RelWithDebugInfo) by uncommenting a commented
out #define.
* Fixed colors in debug draw mode.
* PBVH node boxes in debug mode now flash a different color
when they are updated.
SCULPT_undo_push_begin no longer takes an explicit
name. Instead it takes a wmOperator pointer and uses
op->type->name for the name. This is necassary for
the redo panel to work and should fix the entire class
of bugs related to misspelled undo push names.
Cases where the calling operator is not registered
may use SCULPT_undo_push_begin_ex if desired; it
takes a name string as before.
This new implementation does all downsampling in a single compute shader
dispatch, removing a lot of complexity from the previous recursive
downsampling.
This is heavilly inspired by the Single-Pass-Downsampler from GPUOpen:
https://github.com/GPUOpen-Effects/FidelityFX-SPD
However I do not implement all the optimization bits as they require
vulkan (GL_KHR_shader_subgroup) and is not as versatile (it is only
for HiZ).
Timers inside renderdoc report ~0.4ms of saving on a 2048*1024 render for
the whole downsampling. Note that the previous implementation only
processed 6 mips where the new one processes 8 mips.
```
EEVEE ~1.0ms
EEVEE-Next ~0.6ms
```
Padding has been bumped to be of 128px for processing 8 mips.
A new debug option has been added (debug value 2) to validate the HiZ.
With this patch true headless OpenGL rendering is now possible on Linux.
It changes the logic of the WITH_HEADLESS build flag.
The headless backend is now always available with regular builds and
Blender will try to fall back to it if it fails to initialize other
backends while in background mode.
The headless backend only works on Linux as EGL is not used on Mac or Windows.
libepoxy does support windows and mac, so this can perhaps be remedied in the future.
Reviewed By: Brecht, Jeroen, Campbell
Differential Revision: http://developer.blender.org/D15555
This cleans up the OpenGL build flags and linking.
It additionally also removes some dead code.
One of these dead code paths is WITH_X11_ALPHA which actually never was
active even with the build flag on. The call to use this was never
called because the default initializer for GHOST was set to have it off
per default. Nothing called this function with a boolean value to enable it.
These cleanups are needed to support true headless OpenGL rendering.
Without these cleanups libepoxy will fail to load the correct OpenGL
Libraries as we have already linked them to the blender binary.
Reviewed By: Brecht, Campbell, Jeroen
Differential Revision: http://developer.blender.org/D15554
With libepoxy we can choose between EGL and GLX at runtime, as well as
dynamically open EGL and GLX libraries without linking to them.
This will make it possible to build with Wayland, EGL, GLVND support while
still running on systems that only have X11, GLX and libGL. It also paves
the way for headless rendering through EGL.
libepoxy is a new library dependency, and is included in the precompiled
libraries. GLEW is no longer a dependency, and WITH_SYSTEM_GLEW was removed.
Includes contributions by Brecht Van Lommel, Ray Molenkamp, Campbell Barton
and Sergey Sharybin.
Ref T76428
Differential Revision: https://developer.blender.org/D15291
When dropping file to sequencer timeline, coordinates for strip position
and overlap handling are used even if not set.
Reset internal state in on_drag_start callback and set is_modal
variable only if coordinates are updated. This way when dragging file
from external file browser, strip is added at current frame as before
modal operator was implemented.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D15333
Ensure render passes are allocated in the result prior to writing them.
Alternative could be to not write empty passes, but that is kind of
different from perspective of s one who reads the file.
Differential Revision: https://developer.blender.org/D15692
* Store compact ray differentials in ShaderData and compute full differentials
on demand. This reduces register pressure on the GPU.
* Remove BSDF differential code that was effectively doing nothing as the
differential orientation was discarded when making it compact.
This gives a 1-5% speedup with RTX A6000 + OptiX in our benchmarks, with the
bigger speedups in simpler scenes.
Renders appear to be identical except for the Both displacement option that
does both displacement and bump.
Differential Revision: https://developer.blender.org/D15677
Checking for the existence of and using __GLIBC_PREREQ can't be done in the
same conditional.
Contributed by listout.
Differential Revision: https://developer.blender.org/D15690
Need to update relations when modifiers are added or removed
since those create nodes in the dependency graph.
Added an assert statement to point at possible culprit so
that issues can be fixed more quickly.
The status bar keymap items still don't get translated because the
TIP_ translation introduced by rBe1974ae30e46 uses the wrong context:
it uses the default context, while the extraction introduced in
rB630b961f234e uses ID_WINDOWMANAGER.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15684
This is not dynamic: it only happens when the dir is added to the
list--automatically for recent files, and by the user for bookmarks.
Entries can then be manually renamed like other dirs. They will
keep the same name if the language is changed afterwards.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15629
Compared to the previous implementation this has a limit of 65536 lights
per scene. Lights exceeding this limit will be ignored.
This also introduce fine grained GPU light culling, making rendering
many lights in a scene more efficient as long they don't overlap much.
Compatible light panels have been unhidden.
Note: This commit does not include surface evaluation, only light culling.
These are meant to provide easy shape and AABB operation for culling.
They are currently incomplete but can be extended as one see fits.
The `common_debug_shape_lib.glsl` contains helper to draw thoses shapes.
Adjust static font details so that we can properly display Arabic
contextual letter forms. And so that alphabetical ligatures are loaded
from language-specific fonts.
See D15678 for more details
Differential Revision: https://developer.blender.org/D15678
Own Code.
In this case the array allocation would allocate an array of size zero.
This would then later lead to out of bounds memory reads.
Now the code will skip zero length allocations.
As the surface normal is calculated along with the coordinates, the
surface depth was always being used when surface orientation was set.
Therefore, even calculated, ignore the surface depth when it is not
required.
Also promote an optimization when neither orientation nor depth is required.
At least Depsgraph evaluation and liboverride diffing do process IDs in
parallel, so python code in py-defined properties should not access any
data outside of their owner ID.
Ref. T100203.
This patch causes the render buffers to be copied to the denoiser
device only once before denoising and output/display is then fed
from that single buffer on the denoiser device. That way usually all
but one copy (from all the render devices to the denoiser device)
can be eliminated, provided that the denoiser device is also the
display device (in which case interop is used to update the display).
As such this patch also adds some logic that tries to ensure the
chosen denoiser device is the same as the display device.
Differential Revision: https://developer.blender.org/D15657
Follow-up to design discussions here at the studio, add liboverride
operations into their own sub-menu, with three main entries:
- Create: Create, or enable for user editing, override hierarchies.
- Reset: Keep overrides data, but reset all local changes to the
reference linked data values.
- Clear: like reset, but also turn editable overrides back to system
overrides (aka non user editable).
Those three options can all operate either on the selected items, their
content only, or both.
Advanced operations are moved into a "Troubleshoot Hierarchy" sub-menu,
where one can resync, resync enforced, and fully delete library
overrides. Those operations always affect a whole override hierarchy,
regardless of which items are selected or not.
Library sorting from [0] caused WITH_GPU_BUILDTIME_SHADER_BUILDER
to fail. It's possible there are missing dependencies that caused
the change in order to break, for now revert that change.
[0]: 19b5524d1c
In complex scenes featuring thousands of connections between IDs in
their liboverride hierarchies (e.g. Heist files), the time required to
check if tree items were available (before allocated a new one) would
become insanely long (O(n^2)).
This commit brings it back to roughly a constant time, only re-checking
the whole array for unused items once in a while (once every 10k times
currently), since in almost all cases is the index after `lastused`
value is not unused, and you have reached the end of the currently used
array of items, you actually need to 'allocate' a new one anyway.
It also improves the handling of `lastused` index, in particular in
`tse_group_add_element`.
This makes switching to the Outliner override hierarchy view in Heist
scenes from virtually infinite time (more than 30mins for sure) to about
20 seconds on my machine. Still far from being effectively usable.
Note that this is only a bandaid fix anyway, root of the issue is that
this view has to deal with way too many items in its tree, current code
is not designed for that. Either outliner has to improve its tree
handling (by only building subsets of the whole tree maybe?), or we have
to cull/filter out some of the ID relationships between overridden IDs
to make this view actually usable. Maybe limit the depth of the tree?
Fix wrong assumption that 'embedded' IDs are only ever used by their
owners. This is especially not true with shape keys.
Also small optimization by adding an eraly abort when both IDs are the
same (i.e. an ID has a pointer to itself).
In some cases, there is a chance code already knows who might be the
owner of the given ID, in which case it can be more efficient to check
it first (especially in cases like embedded node trees or scene
collections, where the only other way is to loop over all possible
owners currently).
Will be used in next commit in some Outliner fix.
Since [0] (fix for T95591), the tweak tools fallback action used tweak
instead of press.
This was enabled so tools such as "Measure" & "Add Cube" could use
fallback tools (otherwise is wasn't possible to add a new ruler without
also selecting for e.g.), however this is of limited use since both
tools support dragging anywhere to activate, making them less useful
with other selection tools beside tweak (box/lasso for e.g.).
Resolve by disabling the fallback option for tools where using the
tweak tool to select is undesirable. Selection by clicking with
"Measure" & "Add Cube" is still supported as this is also set in the
3D view's key-map.
[0]: 0e51defcf4
In practice this is harmless as in most cases checking selected
vertices is enough, however as the intention is to check all 3 elements
it's best to do so.
Only lock access to our glyph caches per-font, rather than globally.
Also upgrade from spinlocks to mutexes.
See D15644 for more details.
Differential Revision: https://developer.blender.org/D15644
Reviewed by Brecht Van Lommel
This change allows the Cycles progress report system to take into conderation
the time limit property. This allows for more accuracte progress reports for
high sample count renders with short time limits.
Contributed by Alaska.
Differential Revision: https://developer.blender.org/D15599
GPU_exit is now expected to run within an active GPU context.
Also run BLF_exit and IMB_exit first they can use GPU resources and gave
ASAN errors. And remove redundant GPU_shader_free_builtin_shaders already
handled by GPU_exit.
This commit moves the hide status of mesh vertices, edges, and faces
from the `ME_FLAG` to optional generic boolean attributes. Storing this
data as generic attributes can significantly simplify and improve code,
as described in T95965.
The attributes are called `.hide_vert`, `.hide_edge`, and `.hide_poly`,
using the attribute name semantics discussed in T97452. The `.` prefix
means they are "UI attributes", so they still contain original data
edited by users, but they aren't meant to be accessed procedurally by
the user in arbitrary situations. They are also be hidden in the
spreadsheet and the attribute list by default,
Until 4.0, the attributes are still written to and read from the mesh
in the old way, so neither forward nor backward compatibility are
affected. This means memory requirements will be increased by one byte
per element when the hide status is used. When the flags are removed
completely, requirements will decrease when hiding is unused.
Further notes:
* Some code can be further simplified to skip some processing when the
hide attributes don't exist.
* The data is still stored in flags for `BMesh`, necessitating some
complexity in the conversion to and from `Mesh`.
* Access to the "hide" property of mesh elements in RNA is slower.
The separate boolean arrays should be used where possible.
Ref T95965
Differential Revision: https://developer.blender.org/D14685
Report T98781 and part of T97642: the MTLMaterial info only captures
image nodes and the default socket values. When the image information
is present, do not emit the socket defaults - the .MTL spec states
they are multiplied together, but the default value is not used
in blender when the socket is connected.
Also contains svn tests repository update to extend the test coverage,
and update test expectation outputs.
Take advantage of Waylands wl_keyboard_listener.enter callback which
takes an array of keys that are pressed when a window is activated.
Resolves T74684 under Wayland.
Always use modifier keys from the active window, as changes to the
modifiers aren't sent to inactive windows.
Also resolves modifier keys being lost on window de-activation.
Activating the window again would check the previous state of the
modifiers which was always cleared as of [0],
now clearing is no longer needed.
[0]: 472595f1d3
Font fallback feature not working after reverting the implementation
of the cache system. Missing an blf_ensure_face before
FT_Get_Char_Index. Otherwise glyphs not found in fonts without faces.
Own Code
When RMB select activated the selection tool, Alt-RMB would both
tweak and loop-select.
Fix/workaround this by passing though 'enumerate' unless the option
can be used (when selecting objects or armatures).
Migrate island calculation to #bm_uv_build_islands.
Simplify connectedness calculation.
Reduce memory pressure.
No functional changes.
See also: D15598
While T77801 itself is working as expected in the new C++ obj
importer, the repro file there uses absolute paths to material images,
yet the images themselves are right there in the current folder.
The old python based importer did find them, since it was doing a
really complex image search. My understanding is that while C++
importer was developed, it was decided to not do that -- however
just the "basename file in the mtl directory" sounds simple enough
and gets the repro case file work correctly.
Most of the functions in the compositor cryptomatte file are declared
with extern "C" linkage, which can cause symbol conflict even when
functions exist in separate namespaces. This is not actually necessary,
as the declaration of the few functions that require C linkage are
already declared as such in the header file, so this patch removes the
extern C scope from that file.
Differential Revision: https://developer.blender.org/D15656
Reviewed By: Clement Foucault
This patch allows the viewport compositor to operate in Material Preview
mode.
Differential Revision: https://developer.blender.org/D15655
Reviewed By: Clement Foucault
Fix a number of warnings reported by Clang Tidy in the realtime
compositor's code.
Differential Revision: https://developer.blender.org/D15654
Reviewed By: Clement Foucault
There is no need for these to be limited to -10..10, soft limits are enough.
Contributed by fundorin.
Differential Revision: https://developer.blender.org/D15650
As part of the previous fix (D15410), the importer got code to track
min & max vertex indices used as part of the mesh faces. However, if
faces refer to a "sparse" (i.e. non-contiguous) subset of all vertices,
then the imported mesh would contain all the vertices between min & max
range.
Replace that with proper tracking of actually used vertex indices
for each imported mesh. Fixes T100302.
This does affect import performance a tiny bit, e.g. importing Blender
3.0 splash scene goes 21.7s -> 22.1s, and importing rungholt.obj
goes 2.37s -> 2.48s.
Importer related tests have a bunch of vertex changes in them, since
now vertices are added in the order that the faces are referring
to them. Which incidentally matches the order that the Python based
importer was creating them too.
Solves long-standing issue when dependencies of disabled modifiers are
evaluated.
Simple test case: no drivers or animation. Manually enabling modifier
is expected to bring FPS up, enabling modifier will bring FPS (sine
evaluation can not be avoided)
F13336690
More complex test case: modifier visibility is driven by an animated
property. In am ideal world FPS during property being zero is fast
and when property is 1 the FPS is low.
F13336691.
Differential Revision: https://developer.blender.org/D15625
This patch adds a stub implementation for all unsupported nodes. The
inputs are passed through to the outputs where it make sense, while
other outputs will be allocated a single zero value.
This seems to be preferred by users as opposed to stopping execution and
displaying an error message.
Differential Revision: https://developer.blender.org/D15464
Reviewed By: Clement Foucault
This patch implements the following nodes for the realtime compositor:
- Map range node.
- Map value node.
- Math node.
- Normal node.
- Alpha convert node.
- Separate color node.
- Combine color node.
- Separate XYZ node.
- Combine XYZ node.
- Separate RGBA node.
- Combine RGBA node.
- Separate HSVA node.
- Combine HSVA node.
- Separate YCCA node.
- Combine YUVA node.
- Set alpha node.
- Switch node.
- Switch view node.
- RGB to BW node.
- Color ramp node.
Differential Revision: https://developer.blender.org/D15229
Reviewed By: Clement Foucault
This patch implements the following nodes for the realtime compositor:
- Image node.
- Movie clip node.
- Render layers node.
- RGB node.
- Scene time node.
- Value node.
Differential Revision: https://developer.blender.org/D15227
Reviewed By: Clement Foucault
This patch adds the core realtime compositor evaluator as well as a
compositor draw engine powered by the evaluator that operates in the
viewport. The realtime compositor is a new GPU accelerated compositor
that will be used to power the viewport compositor imminently as well as
the existing compositor in the future.
This patch only adds the evaluator and engine as an experimental
feature, the implementation of the nodes themselves will be committed
separately.
See T99210.
Differential Revision: https://developer.blender.org/D15206
Reviewed By: Clement Foucault
The fix from c0fdf16561 was missing in one place. We don't
want to free the edit mode pointers, those are just copied because the
edit mode changes aren't present in the actual original data-block.
The fix from c0fdf16561 was missing in one place. We don't
want to free the edit mode pointers, those are just copied because the
edit mode changes aren't present in the actual original data-block.
- Use references
- Reorder functions to remove unnecessary prototype
- Use the attribute API
- Use const where possible
- Split no-radius extraction a bit more, add multithreading
Detect cases where a ray-intersection would miss the current triangle, which if
the intersection is strictly watertight, implies that a neighboring triangle would
incorrectly be hit instead.
When that is detected, apply a ray-offset. The idea being that we only want to
introduce potential error from ray offsets if we really need to.
This work for BVH2 and Embree, as we are able to match the ray-interesction
bit-for-bit, though doing so for Embree requires ugly hacks. Tiny differences
like fused-multiply-add or dot product intrinstics in matrix inversion and ray
intersection needed to be matched exactly, so this is fragile.
Unfortunately we're not able to do the same for OptiX or MetalRT, since those
implementations are unknown (and possibly impossible to match as hardware
instructions). Still artifacts are much reduced, though not eliminated.
Ref T97259
Differential Revision: https://developer.blender.org/D15559
The performance of this will be slightly more important for upcoming changes.
Also removed an unused function and changed includes so these system.h can
be included in more places.
These replace float3 and packed_float3 in various places in the kernel where a
spectral color representation will be used in the future. That representation
will require more than 3 channels and conversion to from/RGB. The kernel code
was refactored to remove the assumption that Spectrum and RGB colors are the
same thing.
There are no functional changes, Spectrum is still a float3 and the conversion
functions are no-ops.
Differential Revision: https://developer.blender.org/D15535
Now all the same ones are available on CPU and GPU, which was previously not
possible due to lack of operator overloadng in OpenCL. Print functions are
no-ops on some GPUs.
Ref D15535
Currently, the compositor can be disabled using the WITH_COMPOSITOR
build option. Since, we intent to always build the realtime compositor,
we need to make the distinction between both compositors clear.
So this patch renames the option to WITH_COMPOSITOR_CPU. Additionally,
the check for the option was moved inside the compositor modules' own
CMake file in preparation for the realtime compositor code.
Differential Revision: https://developer.blender.org/D15622
Reviewed By: Jeroen Bakker, Ray Molenkamp
Caused by 38af5b0501.
Adjust barycentric coordinates used for intersection result in the
ray-to-rectangle intersection check.
Differential Revision: https://developer.blender.org/D15592
This is a complete rewrite of the draw debug drawing module in C++.
It uses `GPUStorageBuf` to store the data to be drawn and use indirect
drawing. This makes it easier to do a mirror API for GPU shaders.
The C++ API class is exposed through `draw_debug.hh` and should be used
when possible in new code.
However, the debug drawing will not work for platform not yet supporting
`GPUStorageBuf`. Also keep in mind that this module must only be used
in debug build for performance and compatibility reasons.
- "Name collisions" label in mesh properties
- "Threshold" labels in Vertex Weight Edit modifier
- "Particle System" label in Particle Instance modifier
- Slot number in the Shader Editor
- Status bar keymap items during modal operations:
add TIP_() macro to status bar interface template
- On dumping messages, sort preset files so their messages are stable
between runs
Ref. T43295
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15607
It is currently impossible to access modal keymaps' event values (from
`propvalue` enum) from python code (for API introspection).
This is needed for i18n messages extraction (see D15607).
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D15643
Messages from the bpy.types.Window class were blacklisted in the
message extraction script.
This change allows a few new messages to be translated, including at
least two which show up in the UI. There are only 12 new messages in
the .po files, so even if some never need to be translated, that's not
too many.
Ref. T43295
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15628
- "Name collisions" label in mesh properties
- "Threshold" labels in Vertex Weight Edit modifier
- "Particle System" label in Particle Instance modifier
- Slot number in the Shader Editor
- Status bar keymap items during modal operations:
add TIP_() macro to status bar interface template
- On dumping messages, sort preset files so their messages are stable
between runs
Ref. T43295
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15607
It is currently impossible to access modal keymaps' event values (from
`propvalue` enum) from python code (for API introspection).
This is needed for i18n messages extraction (see D15607).
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D15643
Messages from the bpy.types.Window class were blacklisted in the
message extraction script.
This change allows a few new messages to be translated, including at
least two which show up in the UI. There are only 12 new messages in
the .po files, so even if some never need to be translated, that's not
too many.
Ref. T43295
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15628
Remove the FreeType cache implementation. Not multithreading correctly.
Original commit: 9d77b5a0ed
See D15647 for more details.
Differential Revision: https://developer.blender.org/D15647
Own Code.
Mixing view interpolation with finishing smooth-view caused arguments
to be passed in that only made sense for one of these cases.
This also makes the intention of the callers clearer.
- view3d_smoothview_apply_with_interp
- view3d_smoothview_apply_and_finish
- view3d_smoothview_apply_from_timer
Also rename 'step' to 'factor` and use `interpf` for blending values.
Properly deal with FreeType cache flushing a font's ft_size. Set this
to NULL in finalizer, and add a blf_ensure_size to make sure it
exists only when needed.
See D15639 for more details.
Differential Revision: https://developer.blender.org/D15639
Reviewed by Brecht Van Lommel
Smooth-view wasn't working properly with a locked-camera this could
animate from the wrong position if the camera wasn't in sync with the
underlying viewport transformation.
Resolve issues for:
- VIEW3D_OT_view_orbit
- VIEW3D_OT_view_roll
- VIEW3D_OT_zoom_border
Support pushing undo steps for smooth-view operations that manipulate
the camera. Now V3D_SmoothParams take optional undo arguments.
Used for:
- VIEW3D_OT_view_center_cursor
- VIEW3D_OT_view_center_pick
- VIEW3D_OT_view_orbit
- VIEW3D_OT_view_roll
- VIEW3D_OT_zoom_border
Follow up fix for T92099.
The shader value node always outputs zero in some cases even when its
value is not zero.
This is caused by b639e60864. In that
commit, the behavior of GPU node linking changed such that unlinked
sockets get their value from their associated GPU node stack instead of
the socket itself. But execution node stacks do not always have their
output values initialized, and since the value node stores its value in
its output, it follows that its uniform value will be wrong.
This patch fixes that by getting the value directly from the socket.
This is also done fro the RGBA node, since it is implemented similarly.
Finally, the GPU_uniformbuf_link_out function was removed since it is no
longer used and does not make sense anymore.
Differential Revision: https://developer.blender.org/D15641
Reviewed By: Clement
Caused by {rB791bfae1d64b}.
The solution was to create the special handle for the Move Clip and Mask
transformation.
One change that cannot be reversed is showing the `G` shortcut in the
statusbar.
But the description of this shortcut was not even correct before.
Always use the image datablock filepath for saving. The only apparent reason
use the image buffer file path is image sequences, for which the current frame
filepath is now computed.
zebin format is critical for the compatibility of AoT graphics binaries
across driver versions. It was previously disabled on Linux due to
runtime issues that are now fixed in
https://github.com/intel/compute-runtime/releases/tag/22.31.23852.
The minimum supported driver version isn't bumped to this one yet as
current codebase with current IGC compiler does actually run fine on
earlier drivers and is not running into these issues anymore.
Also add an error message for when the node is used on non-curves
objects, since there's nothing in the UI to show why it doesn't work
except for that. And also use quotes when referring to attribute names.
Remove "Material Icons" font file, mistakenly added.
See D15627 for details
Differential Revision: https://developer.blender.org/D15627
Reviewed by Brecht Van Lommel
This reverts commit 94866ef84f
A number of reports of bevel regressions came after the
commit to fix bevel intersection continuity.
Since the fix for some of those regressions is not obvious
we will revert the continuity improvement and do it as
part of the Bevel V2 project.
This patch removes the [rather confusing] separate checkbox for enclosed
shapes in favour of integrating that option into illumination filtering,
with the benefit of not limiting the selection to cached result.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D15327
Supports undo step generation while navigating in locked camera view.
NDOF & track-pad navigation are not included for now.
Actions that uses smooth view can be supported but are outside
the scope of this change, includes undo push for:
- VIEW3D_OT_view_pan
- VIEW3D_OT_dolly
- VIEW3D_OT_fly
- VIEW3D_OT_move
- VIEW3D_OT_rotate
- VIEW3D_OT_walk
- VIEW3D_OT_zoom
Reviewed by: campbellbarton
Ref D15345
Adds support for extrusion from more than one edge and from inner
lattice legs. Also fixes extrusion from one point. Implemented in two
steps. At first so called "copy intervals" are calculated according to
selected control points. Then those are used to copy control points to
the new surface patch. See the differential revision for a video.
Differential Revision: https://developer.blender.org/D15524
Copy the improved hair curves sync implementation from D14942. That patch is
not ready as a whole but this part was verified to match the old hair particles
can be used already.
Evaluating a compositor node tree in background mode causes the stats callback
to be called from multiple threads, leading to garbled output. This was causing
major problems with render-farm scripts.
Differential Revision: https://developer.blender.org/D15633
It should consistently use the Cycles pirmitive ID for self intersection detection,
not the one from the OptiX or Embree acceleration structure.
Differential Revision: https://developer.blender.org/D15632
This replace the previous square rings approach by sampling a disk the
footprint of the search area. This avoids sampling in areas in corners
where there isn't any weight.
This results in much less samples needed to acheive a good enough result.
The max number of samples for an area of 11x11 px is hard coded to 16 and
still gives good results with the final clamp.
The number of samples is adaptative and is scaled by the search area (max
CoC).
The High Quality Slight Defocus is not required anymore. If there is a
quality parameter to add, it would be sample count option. But I consider
the temporal stability enough for viewport work and render can still
render many full scene samples. So I don't see a need for that yet.
This adds anti-flicker pass to the slight focus region by using the
temporaly stable output from stabilize pass.
This also fixes the bilateral weight factor which was reversed.
This was caused by a missing synchronization.
The background gather pass was writting to the same occlusion texture
before the end of the scatter draw.
This implement a full TAA pass on the depth of field input.
An history buffer is kept for each view needing Depth of field.
This uses a swap with a `TextureFromPool` in order to not always 2
textures allocated.
Since this uses luma weighting without any input, the firefly parameter is
now obsolete and has been removed.
There is some tiny difference with the Film TAA so the implementation is
mostly copy pasted.
Also this implementation uses a LDS cache to speedup the TAA computations.
This moves the slight focus max in tile from the setup pass to the
resolve pass. This reduces complexity as there is no need for an extra
component in the tile textures.
This also avoids skipping any pixels and makes sure the local max matches
the dispatched local group size. This should make the resolve pass a little
bit faster.
Channel selection in graph editor was broken by rB3c5620aabd33 because
the selection took into account grease pencil channels. Such channels
are now removed from selection in containers that does not use them (NLA
and Graph Editor).
Grouping was broken from a similar issue. The grouping operation now
completely filters out grease pencil channels since the operator is only
defined for f-curve channels.
Reviewed By: sybren
Maniphest Tasks: T100093
Differential Revision: https://developer.blender.org/D15601
In {rB0ef8a6179d2a773b2570352bd0cb7eb18b666da2} the parameter name was
changed to match the header declaration (slot) but it missed updating
the variable name inside the function correctly in one instance.
This prevents slot 0 from being cleared if the last slot to be rendered
was not also 0.
Differential Revision: https://developer.blender.org/D15620
This simply adds the name of the incorrect parameter to the error message.
Differential Revision: https://developer.blender.org/D14103
Reviewed by Jeroen Bakker
After recent refactors to mesh normals (cfa53e0fbe), they are no
longer stored in CustomData. A mechanism to compute them eagerly
should be implemented another way.
Implementation of the FreeType 2 cache subsystem, which limits the
number of concurrently-opened FT_Face and FT_Size objects, as well as
caching information like character maps to speed up glyph id lookups.
See D13137 for much more detail.
Differential Revision: https://developer.blender.org/D13137
Reviewed by Brecht Van Lommel
Assume that all faces using the smae material form a closed mesh, so that
joining meshes gives the same result as separate meshes.
It does mean that using different materials on different sides of one
closed mesh do not work, but the meaning of that is poorly defined anyway
if there is a volume interior.
Added logic to the USD Preview Surface importer to
convert UDIM textures.
Reviewed by: Sybren and Jesse
Differential Revision: https://developer.blender.org/D15379
- batch rename
- keyframe settings
- tool name in Tool properties header
- tool name in Tool properties Drag (fake) enum
- new file templates
- new preset
- new text datablock
- new collection datablock
- new geometry nodes (modifier and node group)
- new grease pencil data (layers and materials)
Ref. T43295
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15533
NOTE: This is committed to the 3.3 branch as decided by Bastien, Dalai
and me. That is because these are important usability fixes/improvements
to have for the LTS release.
Part of T95802.
Showing properties with an RNA path in the UI isn't very user friendly.
Instead, represent the RNA path as a tree, merging together parts of the
RNA path that are shared by multiple properties. Properties and "groups"
(RNA structs/pointers) are now shown with their UI name and an icon if
any. The actually overridden properties still show the Library Overrides
icon. See the patch for screenshots.
Also: When a RNA collection item, like a modifier or constraint was
added via a library override, indicate that item and show all collection
items in the list, since the complete list of items and their orders may
be important context.
Differential Revision: https://developer.blender.org/D15606
NOTE: This is committed to the 3.3 branch as part of D15606, which we
decided should go to this release still (by Bastien, Dalai and me). That
is because these are important usability fixes/improvements to have for
the LTS release.
Adds `rna_path.cc` and `RNA_path.h`.
`rna_access.c` is a quite big file, which makes it rather hard and
inconvenient to navigate. RNA path functions form a nicely coherent unit
that can stand well on it's own, so it makes sense to split them off to
mitigate the problem. Moreover, I was looking into refactoring the quite
convoluted/overloaded `rna_path_parse()`, and found that some C++
features may help greatly with that. So having that code compile in C++
would be helpful to attempt that.
Differential Revision: https://developer.blender.org/D15540
Reviewed by: Brecht Van Lommel, Campbell Barton, Bastien Montagne
NOTE: This is committed to the 3.3 branch as part of D15606, which we
decided should go to this release still (by Bastien, Dalai and me). That
is because these are important usability fixes/improvements to have for
the LTS release.
This basically lets the UI use the constraint or modifier icon, whenever
refering to constraints/modifiers via RNA pointers. Used by D15606, so
that the "Modifiers" tree element to group the individual modifiers
together gets the right icon without hardcoded handling.
No user visible changes expected.
NOTE: This is committed to the 3.3 branch as part of D15606, which we
decided should go to this release still (by Bastien, Dalai and me). That
is because these are important usability fixes/improvements to have for
the LTS release.
We have a bunch of "base" element types, just to show a label element
for grouping together other elements. There is no reason to have these
tied to a case, just have a generic label type for this. It requires a
string to display, and can display an icon too. The new element type
isn't used yet, but will be in one of the following commits. Would be
nice if the existing base elements can be replaced by this.
Part of D15606.
This changes makes it possible to copy evaluated result and put it
to the original bmain.
Prior to this change from the API point of view there was false
perception that it is possible, while in practice it was very fragile:
it only worked if the ID did not reference any evaluated IDs.
This change makes it so `id.copy()` Python API call will make it so
the copied ID only references original data-blocks. This sounds a bit
implicit, so here is motivational aspect why it is considered better
approach to all other:
- There needs to be a way to support the described scenario, in the
lest fragile way. Requiring to always use an explicit function call
or an argument is too verbose and is easy to be missed.
- The `id.copy()` is already doing implicit thing: it always adds the
result to the bmain. So it might as well ensure the copied result
does not reference evaluated data-blocks.
- Added clarity in the documentation should address possible confusion.
The limitation of this change is that the copy() of evaluated geometry
will clear its reference to the shape key. This is because the key is
only referenced for validness of RNA paths for drivers and the key
itself might not match topology of evaluated geometry due to modifiers.
Differential Revision: https://developer.blender.org/D15611
Part of T95802.
Showing properties with an RNA path in the UI isn't very user friendly.
Instead, represent the RNA path as a tree, merging together parts of the
RNA path that are shared by multiple properties. Properties and "groups"
(RNA structs/pointers) are now shown with their UI name and an icon if
any. The actually overridden properties still show the Library Overrides
icon. See the patch for screenshots.
Also: When a RNA collection item, like a modifier or constraint was
added via a library override, indicate that item and show all collection
items in the list, since the complete list of items and their orders may
be important context.
Differential Revision: https://developer.blender.org/D15606
It's not obvious that override property operations are recreated on undo
pushes, which caused me some confusion. Comment on this, so it's clear
that pointers to the operations shouldn't be stored.
This basically lets the UI use the constraint or modifier icon, whenever
refering to constraints/modifiers via RNA pointers. Used by D15606, so
that the "Modifiers" tree element to group the individual modifiers
together gets the right icon without hardcoded handling.
No user visible changes expected.
Adds a function that prints the "path" of an element, that is, the
ancestor elements starting from the root, separated by slashes. This can
be useful for debugging. The function isn't used.
No user visible changes expected.
We have a bunch of "base" element types, just to show a label element
for grouping together other elements. There is no reason to have these
tied to a case, just have a generic label type for this. It requires a
string to display, and can display an icon too. The new element type
isn't used yet, but will be in one of the following commits. Would be
nice if the existing base elements can be replaced by this.
Part of D15606.
Add specific modal keyitem for Vert/Edge Slide or TrackBall.
Note that there is a workround to avoid repeated keys in the status bar.
Reviewed By: campbellbarton
Maniphest Tasks: T100129
Differential Revision: https://developer.blender.org/D15597
Add specific modal keyitem for Vert/Edge Slide or TrackBall.
Note that there is a workround to avoid repeated keys in the status bar.
Reviewed By: campbellbarton
Maniphest Tasks: T100129
Differential Revision: https://developer.blender.org/D15597
Paths that contained characters that needed escaping as URL's failed
to import.
Move URL decoding to a new file (GHOST_PathUtils), shared with X11 but
maybe be useful for other platforms too.
Drag & drop worked with GTK3 apps but not QT5 (pcmanfm-qt for eg)
as files are separated by '\n' instead of '\r\n'.
Resolve by supporting both (follow up to T99737).
We have plenty of sorta generic functions, that allocate memory with
some generic name for debugging. When such a function is called and the
memory leaks, it may be unclear which call to it allocated the unfreed
memory (and thus which execution path leads to the leak).
The added function is only available if `NDEBUG` is not defined.
Differential Revision: https://developer.blender.org/D15605
Reviewed by: Sergey Sharybin, Bastien Montagne
Various situations can lead to un-saved UDIM tiles potentially losing
their contents. The most notable situation is a save and re-load of a
.blend file that has "generated" UDIM tiles that haven't been written to
disk yet. Normal "generated" images are reconstructed on demand in these
circumstances but UDIM tiles do not retain the information required for
reconstruction and empty tiles are presented to the user.
This patch stores the generated type information for each tile to solve
this particular issue. It also shifts the Image generation info into the
1st tile. The existing DNA fields are deprecated but RNA was modified as
to not break API compat.
There's two broad changes here that merit special callout:
- How to distinguish between a tile that should be reconstructed vs.
a tile that should remain empty because loading failed for the UDIMs
- How to better handle Image Source changes
The first issue is addressed as follows:
- Each time a tile is filled with generated content we set a new
IMA_GEN_TILE flag
- Each time a tile is saved to disk we remove the IMA_GEN_TILE flag
- When requesting an ibuf: If the ibuf is null, we check to see if
IMA_GEN_TILE is set. If it is set, go ahead and re-create the tile.
Otherwise, do nothing.
The second set of changes have to do with ensuring that information is
carried along as far as possible when the, sometimes destructive, act of
changing an Image Source is performed. Behavior should be a bit more
natural and expected now; though users will rarely, or should rarely, be
modifying this property. The full table describing the behavior is in
the differential.
Differential Revision: https://developer.blender.org/D14885
Winding was originally added to island detection in 5197aa04c6.
However the sculpt tools can flip faces, potentially creating orphaned
islands if winding is enabled.
Differential Revision: https://developer.blender.org/D15600
Due to a recent change, empty strings are unhandled. This results
in Blender crashing.
This patch fixes the crash but a discrepancy still exists...
Prior to the regression, the empty string would be replaced by the
name of the data type. This patch uses "Attribute" for the default
name regardless of type. Restoring the previous behavior would
require making and/or modifying API methods.
Regression introduced in: rBeae36be372a6
Reviewed By: Joseph Eagar & Campbell Barton
Differential Revision: https://developer.blender.org/D14734
Ref D14734
The `DefaultMixer` for mixing generic data types has some issues:
1. The full buffer is always zeroed, even if only some is used.
2. Finalizing also works on all values, even if only some are used.
3. "mixing" doesn't allow setting the first value, requiring that
everything is cleared beforehand.
This commit adds the following functionality:
1. Constructor with the specified `IndexMask` for preliminary zeroing.
2. `set` method to overwrite the value.
3. `finalize` with the specified mask to process a subset of values.
This is useful in situations where you want to use the
DefaultMixer without having to overwrite all the values many times.
A performance improvement was observed for NURBS curve evaluation and
attribute interpolation from the point to curve domain of about 15% and
35% respectively (100,000 curves).
Differential Revision: https://developer.blender.org/D15434
The sequencer OpenGL viewport renders would not render the metadata into
the image even if the option was on.
Did minor cleanups in the render function as well.
Happens after recent changes in the area.
The asserts were a bit too strict and were against the way how the
ID_RECALC_ALL is handled. So remove them with explanation why things
needs to be silent.
The Python based exporter was replacing spaces with underscores
in object/group names, mostly to handle cases where names could begin
or end with spaces. The new exporter was not doing that. Note: spaces
in material names were already handled by the new exporter.
Fixes T97769. Updated test coverage expectations; one of the test
files has an object with a space in the name.
Add IMB_gpu_get_texture_format and GPU_texture_format_description to
retrieve and 'stringify' an eGPUTextureFormat. These are then used in the
image info panel used in several areas across blender.
New Information:
{F13330937}
Reviewed By: jbakker
Maniphest Tasks: T99998
Differential Revision: https://developer.blender.org/D15575
Timeline marker names are now correctly clipped instead of messily
overlapping each other and being unreadable. This change affects all
the animation editors (graph editor, NLA, action editor etc.) as well
as the VSE.
This also makes a change to when text is elevated. In the previous
behavior, a marker's text would be elevated if it was selected or if
the current frame was <= 4 frames away from the marker. This seems
like a completely arbitrary thing (probably added in to alleviate text
overlapping for markers that the user would be interested in). This
patch changes the behavior such that the marker's text will be elevated
if it is either selected or it is the last marker encountered relative
to the current frame.
When searching for closest UDIM with integer co-ordinates, several UDIMs
can be equidistant. Previously, of all closest UDIMs, the one which was
earliest in the list would be used. Now, "half-open interval" rules are
used to break the tie.
Motivated by 0fcc04e7bf
Differential Revision: https://developer.blender.org/D15590
The virtual array created by the implicit conversions had a lot of
overhead when converting many values. Implement "materialize"
functions to avoid a virtual function call for every element.
This gave me a 20x improvement when copying the values
from a float attribute as a boolean, though I doubt there are
any real world situations where it's that noticible.
This is a port of the previous implementation but using compute
shaders instead of using the raster pipeline for every steps.
Only the scatter passes is kept as a raster pass for obvious performance
reasons.
Many steps have been rewritten to take advantage of LDS which allows faster
and simpler downsampling and filtering for some passes.
A new stabilize phase has been separated from another setup pass in order
to improve it in the future with better stabilization.
The scatter pass shaders and pipeline also changed. We now use indirect
drawcall to draw quads using triangle strips primitives. This reduces
fragment shader invocation count & overdraw compared to a bounding
triangle. This also reduces the amount of vertex shader invocation
drastically to the bare minimum instead of having always 3 verts per
4 pixels (for each ground).
This updates image bind tracking to be the same as texture binds.
Adding a new bind flag to avoid conflict when the texture is used in
both slots.
Fixes a gl error in glBindImageTextures about invalid image binds.
Replaces `DRW_shgroup_call_procedural_triangles_indirect`.
This makes the indirect drawing more flexible.
Not all primitive types are supported but it is just a matter of adding
them.
The specific functions for vertex colors and and sculpt vertex colors
can be replaced by more generic attribute functions internally.
Also remove a paramter from one function.
The "Color Attributes" system from f7bbc7cdbb has replaced
both "Sculpt Vertex Colors" and "Vertex Colors" in the UI. The Operators
for adding and removing them are unused now.
This commit does not break backwards compatibility with the Python
API, it only removes the operators, which generally aren't used by
addons anyway. The mesh RNA properties will be removed in 4.0 (T100153).
Differential Revision: https://developer.blender.org/D15077
Instead of passing pointers to specific mesh data, rely on
retrieving that data from the mesh internally. This makes
it easier to support retrieving additional data from Mesh
(like active attribute names in D15101 or D15169). It also makes
the functions simpler conceptually, because they're drawing
a mesh with an acceleration strcture on top.
The BKE_id_attribute_copy_domains_temp call was unnecessary
because the GPU_pbvh_mesh_buffers_update function was only
called when Mesh/PBVH_FACES is used in the first place.
Differential Revision: https://developer.blender.org/D15197
When dropping file to sequencer timeline, coordinates for strip position
and overlap handling are used even if not set.
Reset internal state in on_drag_start callback and set is_modal
variable only if coordinates are updated. This way when dragging file
from external file browser, strip is added at current frame as before
modal operator was implemented.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D15333
Mask and color brushes were using the existing PBVH vertex "update tag"
to mark their modifications. This was mostly unnecessary, and causes
unnecessary calculation of normals. It also caused errors though,
because they didn't tag the corresponding PBVH node for normal
recalculation, causing problems on the borders of nodes, since one
node might accumulate into another's vertex normals, but the other
node wouldn't also accumulate and normalize the normals.
The solution is to only use the update tag for tagging deformed
vertices that need recalculated normals. Everything else is handled at
the PBVH node level (which was already the case, but it wasn't clear).
The update tag was also used for undo to tag the nodes corresponding to
changed vertices. This was wrong though, because normals and visibility
would also be recalculated for just color or mask undo steps. Instead,
just use local arrays to map from vertices to nodes.
Differential Revision: https://developer.blender.org/D15581
Since 1a81d268a1, materials on object data can change during
evaluation. But a different function is necessary to retrieve materials
taking that into account.
Solves part of T96721.
Differential Revision: https://developer.blender.org/D15595
Part of {T84999}
This patch adds test for
- `dissolve_limited`
- `dissolve_mode`
- `merge_normals`
Updated blend file:
{F13162744}
Reviewed By: zazizizou, mont29
Differential Revision: https://developer.blender.org/D15187
Now when an ID template is set to an override ID, `Shift-Click` on the
right button toggles between making it user-editable (if it's a system
override), or clearing any user edit and setting it back to system override.
Because of the recent changes to our core fonts,
Freetype has to support Woff2 fonts or Blender will segfault on startup.
This adds an explicit check for this to inform people compiling Blender
about this requirement.
Caused by 38af5b0501.
Adjust barycentric coordinates used for intersection result in the
ray-to-rectangle intersection check.
Differential Revision: https://developer.blender.org/D15592
This loosens the current implementation a bit to only force optimal
display when editing on cage. It used to be any editing mode.
Brings GPU based subdivision closer to the CPU version.
Note that ideally, we should have a protection mechnism at global RNA
level, making e.g. any evaluated data read-only... But for now, give
better (and more consistent) protection for the collections' link/unlink
of children collections and objects.
The filter was missing in some places that are using channel data as if it was f-curve channel.
There seems to be no related issue or bug, but still it would be best to have them there.
Reviewed By: sybren
Differential Revision: http://developer.blender.org/D15505
The tagging code was iterating over bits set in the ID_RECALC_ALL and
was casting the flag to IDRecalcFlag. This was triggering an undefined
behavior warning in Clang since the bit might not have a corresponding
value in the enumerator.
The solution is to pre-define all reacalc flags for all bits. While
this seems a bit annoying this seems to be the least fragile solution
from all suggested ones.
Differential Revision: https://developer.blender.org/D15602
Always use unsigned int for the recalc flags. This allows to use
all 32 bit of integer for the flags without worrying about the
sign. Use full notation of `unsigned int` instead of short `uint`
to avoid pulling more headers in.
Whenever depsgraph API allows passing combined recalc flags call
the variable `flags` and use `unsigned int` type for it. For a
single flag use `IDRecalcFlag` flag.
No functional changes expected.
For SVG is very convenient to be able to import several SVG in one operation. Each SVG is imported as a new Grease Pencil object.
Also, now the SVG file name is used as Object name.
Important: As all SVG imported are converted to Grease Pencil object in the same location of the 3D cursor, the SVG imported are not moved and the result may require a manual fix of location. The same is applied for depth order, the files are imported in alphabetic order according to the File list.
Reviewed By: mendio, pepeland
Differential Revision: https://developer.blender.org/D14865
Python based OBJ importer, as well as glTF2 importer, are creating
"placeholder" images for texture images that can't be found. These
are empty textures (displayed as magenta), but with their file paths
set so that File > External Data > Report Missing Files can report
them as missing.
Make the new C++ OBJ importer do the same as well. Fixes T99502.
This is a partial fix for T90535.
USD allows binding materials generically as well as for a
specific purpose. I.e., purpose may be generic (unspecified)
or one of
- Full: truest representation of the scene
- Preview: lightweight material for preview
Curently, only generically bound materials, with unspecified
purpose (allPurpose), are imported. This issue is preventing
preview materials from being imported in the Alab scene.
This patch adds logic to attempt to fall back on importing
preview or full materials, in that order, if there is no
generic material bound to the mesh.
Reviewed by: Sybren
Differential Revision: https://developer.blender.org/D15352
Affected by rB8621fdb10dc4
Crash if single-user data is created when we apply transform
on multi-user image data. Crash occurs because creation of new copy
was not handled in `single_obdata_users` for empty objects (image for example)
Reviewed By: dfelinto, mont29
Maniphest Tasks: T100040
Differential Revision: https://developer.blender.org/D15587
Although eevee-next is disabled in Blender 3.3 there is an error that is
visible when compiling shaders using the shader builder.
This is because of an error in a preprocessing directive (defined should
be define).
Presets are used all over the Blender UI, but were so far untranslatable.
This adds the translation code as well as a new `dump_preset_messages()` function in the message extraction. This goes over all bundled preset file names and extracts them.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15570
This is the same principle as D15418 and D15532, but this time it's
only really needed for "IK".
Nevertheless it's probably good to add them anyway in case they get
renamed and don't share a translation with other messages somewhere
else in the code, for instance if it is decided that new constraint names
shouldn’t include spaces, like other data do.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15571
Pretty much like D15418: add `N_()` macro around names for
Grease Pencil modifiers and shader FX.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15532
Recently, performance with oneAPI have regressed due some recent
changes in Blender itself. This commit's changes is resolving this
and also improve compilation time for oneAPI backend first
execution (or Blender compilation time in case of AoT).
Regression have appeared after 5152c7c152 and not related to the
changes itself, but increase of kernels complexity introduced with
it. Changes in this commit is marking some Blender functions as
noinlined for oneAPI backend, which helps GPU compiler to deal with
this complexity without any negative side-effects on performance.
The Python based importer had logic to immediately turn image paths
into relative-to-blender-file paths, if user preference for relative
paths is used (which is on by default). The new importer code did not
have that. Fixes T100076.
Reference images in the reference_override_dir will be chosen before
images in reference_dir. This allows platform specific reference
images, with a common base.
Ignored when set to None. The caller is responsible
of setting the reference override dir as the unit test is more aware
what the definition of a platform is.
Patch adds `gpu.platform.device_type_get` function to get the device
type that blender has detected.
Reviewed By: brecht
Maniphest Tasks: T99046
Differential Revision: https://developer.blender.org/D15265
The new OBJ/MTL importer was creating a new image for any referenced
texture, even if another material (or another property of the same
material) already referenced the same texture. Make it use
BKE_image_load_exists function just like Collada or USD importers do.
Fixes T100075. Extended test coverage to count imported images;
without the fix import_cubes_with_textures_rel would have incorrectly
created 5 images instead of 4.
Use a smaller arrow text character as menu item separator.
See D15578 for examples and details.
Differential Revision: https://developer.blender.org/D15578
Reviewed by Julian Eisel
There's been a handful of reports where "obviously" not a UDIM filenames
were detected as such during image open.[1]
This change makes the detection less aggressive by enforcing that the
4-digit sequence be delineated on both sides by one of the following 3
characters ., -, _
This fixes the problem for such filenames as:
"screenshot-1080p.png", "Image-1920x1080.png", "(1999) Photo.png", and
"antiguaChestnut_X_1240Wx814H.png"
[1] T97366 T98918 T99154 T100035
Differential Revision: https://developer.blender.org/D15573
This is a port of sculpt-dev's `SculptVertRef` refactor
(note that `SculptVertRef was renamed to PBVHVertRef`)
to master. `PBVHVertRef` is a structure that abstracts
the concept of a vertex in the sculpt code; it's simply
an `intptr_t` wrapped in a struct.
For `PBVH_FACES` and `PBVH_GRIDS` this struct stores a
vertex index, but for `BMesh` it stores a direct pointer
to a BMVert. The intptr_t is wrapped in a struct to prevent
the accidental usage of it as an index.
There are many reasons to do this:
* Right now `BMesh` verts are not logical sculpt verts;
to use the sculpt API they must first be converted to indices.
This requires a lot of indirect lookups into tables, leading to performance
loss. It has also led to greater code complexity and duplication.
* Having an abstract vertex type makes it feasible to have one unified
temporary attribute API for all three PBVH modes, which in turn
made it rather trivial to port sculpt brushes to DynTopo in
sculpt-dev (e.g. the layer brush, draw sharp, the smooth brushes,
the paint brushes, etc). This attribute API will be in a future patch.
* We need to do this anyway for the eventual move to C++.
Differential Revision: https://developer.blender.org/D14272
Reviewed By: Brecht Van Lommel
Ref D14272
Instead of specifying which symbols to hide, we hide all and make a few
visible. Some users may be relying on calling internal Blender functions,
but Windows is already hiding all of them and this is just not supported.
Fixes T99900: crash with some third-party Python libraries since OneAPI
Ref T76442
Differential Revision: https://developer.blender.org/D14971
Adds `rna_path.cc` and `RNA_path.h`.
`rna_access.c` is a quite big file, which makes it rather hard and
inconvenient to navigate. RNA path functions form a nicely coherent unit
that can stand well on it's own, so it makes sense to split them off to
mitigate the problem. Moreover, I was looking into refactoring the quite
convoluted/overloaded `rna_path_parse()`, and found that some C++
features may help greatly with that. So having that code compile in C++
would be helpful to attempt that.
Differential Revision: https://developer.blender.org/D15540
Reviewed by: Brecht Van Lommel, Campbell Barton, Bastien Montagne
Checking arm64 assembly support before CUDA/Metal would cause NVCC to
generate inline arm64 assembly.
Differential Revision: https://developer.blender.org/D15569
While this was not a critical issue (that lib pointer is only used for
some kind of sanity check that no linked data uses local ID pointers),
better to keep `IDP_BlendReadLib` in sync with all other lib-linking
code.
This patch implements the necessary changes to the GPU module that are
needed by the realtime compositor.
A new function GPU_material_from_callbacks was added to construct a GPU
material from a number of callbacks. A callback to construct the
material graph by adding and linking the necessary GPU material nodes.
And the existing code generator callback. This essentially allows the
construction of GPU materials independent of node trees and without the
need to do any node tree localization.
A new composite source output to the code generator was added. This
output contains the serialization of nodes that are tagged with
GPU_NODE_TAG_COMPOSITOR, which are the nodes linked to the newly added
composite output links.
Two new GPU uniform setters were added for int2 and matrix3 types.
Shader create info now supports generated compute sources.
Shaders starting with gpu_shader_compositor are now considered part of
the shader library.
Additionally, two fixes were implemented. First, GPU setter node
de-duplication now appropriately increments the reference count of the
references resources. Second, unlinked sockets now get their value from
their associated GPU node stack instead of the socket itself.
Differential Revision: https://developer.blender.org/D14690
Reviewed By: Clement
Currently, draw engines are not notified of view updates if a render
engine is active and was updated. It is unclear why this is the case
currently, but this behavior was part of the initial commit.
This patch propagates view updates regardless if the update was handled
by an active render engine. This is needed by the realtime compositor as
it implements logic for view updates, which currently does not execute
if Cycles is rendering for instance.
Differential Revision: https://developer.blender.org/D15207
Reviewed By: Brecht
Replace our existing two fonts with a stack of new fonts to increase
and improve language coverage and to add many new symbols and icons.
Covers glyphs of top 44 languages - 1.5 billion more potential users.
See D10887 for lots of details.
Differential Revision: https://developer.blender.org/D10887
Reviewed by Brecht Van Lommel
Allow FontBLFs to exist with NULL FT_Face, added only when actually
needed. Speeds up startup and unused fonts are not loaded.
See D15258 for more details.
Differential Revision: https://developer.blender.org/D15258
Reviewed by Brecht Van Lommel
Optimize font drawing by skipping empty strings.
See D15472 for more details.
Differential Revision: https://developer.blender.org/D15472
Reviewed by Campbell Barton
This is a quite interesting case, where two arguments to a function are
evaluated in different order on Apple Clang than on GCC and I guess
MSVC. Left a comment on that.
There was already a utility to retrieve the correct node group idname
from the context, `node_group_idname`, but often it's clearer to
use lower-level arguments, or the context isn't accessible.
Storing the group idname in the tree type makes it accessible
without rewriting it elsewhere.
* OneAPI: remove separate float3 definition
* OneAPI: disable operator[] to match other GPUs
* OneAPI: make int3 compact to match other GPUs
* Use #pragma once
* Add __KERNEL_NATIVE_VECTOR_TYPES__ to simplify checks
* Remove unused vector3
This reverts commit e2c02655c7. It was already
reverted in the 3.2 branch, as it caused more serious issues than it solved.
Fixes T99805, T99323, T99296.
The new implementation leverage compute shaders to reduce the
number of passes and complexity.
The max blur amount is now detected automatically, replacing the property
in the render panel by a simple checkbox.
The dilation algorithm has also been rewritten from scratch into a 1 pass
algorithm that does the dilation more efficiently and more precisely.
Some differences with the old implementation can be observed in areas with
complex motion.
This removes the quirk of having to call the sync function for each new
render loop.
# Conflicts:
# source/blender/draw/engines/eevee_next/eevee_view.cc
New `oldnewmap_lib_insert` does nothing special, it just wraps around existing
`oldnewmap_insert`, but it's the logical counter part of `oldnewmap_liblookup`.
It also helps tremendously when debuging complex ID pointers issues in
readfile.c code.
Crash would happen when a linked ID would become missing, that was
'pre-declared' and used only once as a 'weak link' in another library
stored before the one it came from.
In that case, the place-holder generated in read code would be freed in
`read_library_clear_weak_links`, when handling its 'owner' library, but
since all previous libraries in the list had already been 'lib_linked'
and their filedata (and related libmap) freed, the update of the libmaps
in `read_library_clear_weak_links` would not apply to data from those
previous libraries, leading to ID pointers there pointing to freed
memory.
This fix should also be backported to 2.93.
The Python based importer had a special case handling of "no faces in
the whole file at all", where it ended up treating the whole file
as essentially a point-cloud-like object (just loose vertices, no
faces or edges). The new importer code was missing this special case.
Fixes T100017. Added gtest coverage that was failing without the fix.
Only nodes supporting lazyness can mark inputs as unused. For other
nodes, this is done automatically of all outputs are unused.
Differential Revision: https://developer.blender.org/D15409
When plotting equally distant points around a circle support an extra
axis of symmetry so twice as many exact values are repeated than
originally added in [0], see code-comments for a detailed explanation.
Tests to ensure accuracy and exact symmetry have been added too.
Follow up on fix for T87779.
[0]: 087f27a52f
When plotting equally distant points around a circle support an extra
axis of symmetry so twice as many exact values are repeated than
originally added in [0], see code-comments for a detailed explanation.
Tests to ensure accuracy and exact symmetry have been added too.
Follow up on fix for T87779.
[0]: 087f27a52f
Simplifies intersection code a little and slightly improves precision regarding
self intersection.
The parametric texture coordinate in shader nodes is still the same as before
for compatibility.
This was removed in cacdea7f4a to fix a bug, but copying point
and curve attributes should be fine as long as the attribute arrays are
retrieved before-hand.
Differential Revision: https://developer.blender.org/D15541
The problem was that zero-sized and non-existant attributes were
handled the same in some parts of the attribute API, which led to
unexpected behavior.
The solution is to properly differentiate the case when an attribute
does not exist and when it is just empty (because the geometry
is empty).
Differential Revision: https://developer.blender.org/D15557
* BLENDER_VERSION_CYCLE set to beta
* Update pipeline_config.yaml to point to 3.2 branches and svn tags
* Update and uncomment BLENDER_VERSION in download.cmake
This name doesn't require understanding of fields, and
is phrased as an action which is consistent with other nodes.
Discussed in the latest geometry nodes sub-module meeting.
This adds three new nodes:
* `Shortest Edge Paths`: Actually finds the shortest paths.
* `Edge Paths to Curves`: Converts the paths to separate curves.
This may generate a quadratic amount of data, making it slow
for large meshes.
* `Edge Paths to Selection`: Generates an edge selection that
contains all edges that are part of a path. This can be used
with the Separate Geometry node to only keep the edges that
are part of a path. For large meshes, this approach can be
much faster than the `Edge Paths to Curves` node, because
less data is created.
Differential Revision: https://developer.blender.org/D15274
Add a version of #BKE_main_namemap_validate that also fixes the issues,
and call it in a do_version to fix recent .blend files saved after the
regression introduced in rB7f8d05131a77.
This is mandatory to fix some production files here at the studio, among
other things.
The function to rearrange channels only works for F-curves channels for now, adding the `FCURVESONLY` filter prevents the function to be called for grease pencil channels, thereby fixing the crash.
Reviewed by : sybren
Differential Revision: http://developer.blender.org/D15504
Add a util function to check that content of a given Main and the
namemaps in it are consistent.
Add some asserts calling this check after file read, and after some
override operations.
The previous order was based on the order of when the tools were
developed. Instead we now cluster them based on similar functionality:
* Selection
* Add/Remove
* Deform/Transform
* Annotation
Done in collaboration with Pablo Vazquez.
Liboverrides are doing some very low-level manipulation of IDs in apply
code, to reduce over-head of name and sorting handling.
This requires specific care to ensure thatr the new namemap runtime data
remains up-to-date and valid. Otherwise, names of existing IDs would be
missing from the map, which would later lead to having several different
IDs with the same name. Critical corruption in Blender ID management.
Reported by animators at the Blender studio.
Regression from rB7f8d05131a77.
A mistake in the 0dcee6a386 which made specific driven visibility
to work, but did not properly handle actual time-based visibility.
The basic idea of the change is to preserve recalculation flags of
nodes which were tagged for update but were not evaluated due to
visibility constraints. In the file from the report this makes it
so tagging which is done first time ID is in the dependency graph
are handled when the ID actually becomes visible. This is what
solved the root of the problem from the report: there was missing
geometry update since it was "swallowed" by the evaluation during
the object being invisible. In other configurations this change
allows to handle pending geometry updates due to animated modifiers
be handled when object becomes visible without time change.
This change also solves visibility issue of the synchronization
component which also started to be handled badly since the
previous fix attempt. Basically, the needed exception in its
visibility handling did not happen and a regular logic was used
for it.
Tested with files from the T99733, T99976, and from the Heist
project.
Differential Revision: https://developer.blender.org/D15544
The number of Execution Units and resident "threads" (simd width * threads
per EUs) are now exposed and used to select the number of states using
a simplified heuristic.
It was never added for the field on domain and field at index nodes.
They need special handling because they have many what should be
a multi-type socket declaration.
This patch adds a `mute` RNA property on `ActionGroup`s that allows them to be easily muted/unmuted from python.
This uses the existing `AGRP_MUTED` flag which was also accessible from the user interface.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D15329
To keep consistency is better add the word `Inactive` for `Fade Layers` and `Fade Objects` to keep the same naming used in other areas of the overlay panel.
Reviewed by: Matias Mendiola
This commit fixes the opacity for curves hiding the option.
Actually, the curve points and handles drawing is using the same code that mesh curves and the opacity is not supported. While this feature will be added for mesh curves and gpencil, now it's better to hide this option.
Reviewed: Matias Mendiola
Note: The handle problem reported in this task was fixed in a separated commit: 203e7ba332
Previously there was a special extraction process for "vertex colors"
that copied the color data to the GPU with a special format. Instead,
this patch replaces this with use of the generic attribute extraction.
This reduces the number of code paths, allowing easier optimization
in the future.
To make it possible to use the generic extraction system for attributes
but also assign aliases for use by shaders, some changes are necessary.
First, the GPU material attribute can now store whether it actually refers
to the default color attribute, rather than a specific name. This replaces
the hack to use `CD_MCOL` in the color attribute shader node. Second,
the extraction code checks the names against the default and active
names and assigns aliases if the request corresponds to a special active
attribute. Finally, support for byte color attributes was added to the
generic attribute extraction.
Differential Revision: https://developer.blender.org/D15205
Changing the value doesn't accomplish anything, since the retrieved
value would be the same for every index then. So it's best to hide it
to make the node clearer.
* OpenEXR 3.1.4 -> 3.1.5, this fixes several issues OSS fuzz found.
* libtiff 4.3.0 -> 4.4.0, this fixes several CVE's.
This also converts the harvest of libtiff on windows to a post install handler,
there's a few left but Windows is getting close to being harvest free.
Differential Revision: https://developer.blender.org/D15478
This is a refresh of our current FFmpeg 5.0.0 (unchanged) version with the
following changes:
* libvpx all platforms: enable SSE3/4/AVX/AVX2 instruction sets. libvpx has a
proper CPUID check in place and will not call the faster kernels unless it is
sure the CPU supports it. So we can safely enable this, this partially
resolves T95743 (completely on Linux and macOS).
* libvpx Windows - threading was disabled due to a shared dependency on
libwinpthreads.dll which we prefer not to distribute. However when configure
cannot find pthreads it will happily fall back on a win32 threads based
emulation layer. This also resolves the final part of T95743.
* libaom-av1 - new dependency required for D14920, this is a somewhat odd
dependency, it's cmake based, but still needs the perl environment setup, so
we have to setup the env and call cmake our selves for the configure, build
and install commands. This dep has the same libwinpthreads issue as vpx on
Windows, however since it's cmake based, it's easier to prevent cmake from
detecting it.
Differential Revision: https://developer.blender.org/D15399
The Graph, Driver, and Dopesheet's (and sub modes) properties panel
(N-Panel) are now open by default. This includes the editors in the
default Animation workspace.
Note that, because the Timeline is implemented as a special mode of the
Dopesheet, switching between Timeline and Dopesheet will *not* change
the visibility of the properties panel.
Maniphest Tasks: T97980
Differential Revision: https://developer.blender.org/D14910
This reverts the Flex-related parts of commit
rBef268c78933079137288e326704431432adf9ad9, as those caused a build
error on CentOS 7 (which is used for the precompiled Linux libraries).
CentOS 7 only has Automake 1.13, whereas after this commit version 1.15
seems to be required.
Since in its patch description (D15319) it's mentioned that this
"probably doesn't warrant changing", and it's actually blocking the
build of the precompiled libraries for Blender 3.3 now, I'll revert the
Flex-related part of the commit.
`parallel_invoke` allows executing functions on separate threads.
However, creating tasks in tbb has a measurable amount of overhead.
Therefore, it can be benefitial to disable parallelization when
the amount of work done per function is small.
See D15539 for some benchmark results.
Differential Revision: https://developer.blender.org/D15539
The stroke points were changed but the bounding box calculation was not done and this produced a problem in any bounding box check done by different tools.
Any script that raised a SystemExit called by --python, --python-expr
command line args or by executing the text block would exit without
printing a message. This caused the error from T99966 to be hidden.
Add explicit handling for SystemExit to ensure the message is always
shown before exiting.
More details noted in code-comments.
float8 is a reserved type in Metal, but is not implemented. So rename to
float8_t for now.
Also move back intersection handlers to kernel.metal, they can't be in the
class that encapsulates the other Metal kernel functions.
The issue was introduced by rBad5e3d30a2d2 which made possible to use
unbounded elevation angle.
In order to not touch the shading code, we just remap the value to the
expected range the shading code expects. This means that elevation angles
above +/-PI/2 effectively flip the sun rotation angle.
There is a 1 pixel error in the size registered for the buffer
dimensions.
NOTE: This issue indicates that the texture scale is different from the
region, so the mouse-based coordinates used are actually misaligned.
This misalignment will be fixed in another commit.
Regression probably introduced in rB1d49293b8044 + rB45f167237f0c8
The "snap to surface" operators now have "disabled" poll messages
when there is no surface object.
The implementation in most curves operators is also unified.
The goal is to avoid having to define and use the poll failure messages
in multiple places, to reduce the boilerplate that tends to be
necessary to add an operator, and to increase the likelihood that
operators are implemented with proper poll messages.
Differential Revision: https://developer.blender.org/D15528
This was tested in some places to check if code was being compiled for the
CPU, however this is only defined in the kernel. Checking __KERNEL_GPU__
always works.
This patch adds required math functions for float8 to make it possible
using float8 instead of float3 for color data.
Differential Revision: https://developer.blender.org/D15525
Having the OptiX/MetalRT/Embree/MetalRT implementations all in one file with
many #ifdefs became too confusing. Instead split it up per device, and also
move it together with device specific hit/filter/intersect functions and
associated data types.
All our intersections functions now work with unnormalized ray direction,
which means we no longer need to transform ray distance between world and
object space, they can all remain in world space.
There doesn't seem to be any real performance difference one way or the
other, but it does simplify the code.
This fixes two issues:
* There was a crash when the new attribute name was empty.
* The attribute name was incremented (e.g. "Attribute.001") when
the old and new name were the same.
Proposed solution by @scurest The color attribute in the RNA was tagged as
COLOR_GAMMA. This change will change it to a regular COLOR.
{F13217692}
Reviewed By: joeedh, jbakker
Maniphest Tasks: T99036
Differential Revision: https://developer.blender.org/D15272
It looked up the vertex group index based on the object instead of the
actual mesh that is currently used. Since geometry nodes, the number
and order of attributes can change in arbitrary ways during evaluation.
Therefore, this index has to be looked up on the mesh which contains
the most up-to-date information.
There are probably similar issues in other modifiers. That has to be
fixed step by step. Ideally by using the attribute api directly eventually.
When dragging assets into the 3D View while in any other mode than
object mode, dropping would be disabled and the cursor would indicate
that. However there was supposed to be an "Only supported in object
mode" message, that similar operators showed, but got forgotten when
this one was introduced.
UV maps that are used for surface attachment must not have overlapping
uv islands, because then the same uv coordinate would correspond to
multiple surface positions.
Ref T99936.
Calling two non-const methods on a `MutableAttributeAccessor`
at the same time in multiple threads is not safe.
While I don't know what caused the crash here exactly, I do know
that it happens while looking up the attribute for writing, which
may modify the unterlying geometry. I couldn't reproduce the
bug with a debug build or without threading.
When texture painting a lot of time is spent in ED_image_paint_tile_find.
This fixes stores the PaintTiles in a blender::Map making ED_image_paint_tile_find an O(1) rather than O(n) operation.
When using threading the locking should happen during read as well,
still this gives a boost in performance as the read is now much faster.
Reviewed By: jbakker
Maniphest Tasks: T99546
Differential Revision: https://developer.blender.org/D15415
In a test producing 10 million vertices I observed a 3.6x improvement,
from 470ms to 130ms. The largest improvement comes from calculating
each mesh array on a separate thread. Besides that, the larger changes
come from splitting the filling of corner and face arrays, and
precalculating sines and cosines for each ring.
Using `parallel_invoke` does gives some overhead. On a small 32x16
input, the time went up from 51us to 74us. It could be disabled
for small outputs in the future. The reasoning for this parallelization
method instead of more standard data-size-based parallelism is that the
latter wouldn't be helpful except for very high resolution.
As discussed, this only updates objects in and the world of the scene to which the view layer belongs, which also avoids the problem of not having a BMain available.
Differential Revision: https://developer.blender.org/D14740
The Alembic importer uses a linear search over the mesh edges to find
the right edge when setting edge creases. Although the complexity is
`O(m * n)`, with `m` being the number of creased edges, and `n` being
the number of edges, this can lead to a quadratic complexity as `m`
approches `n`.
This patch uses `EdgeHash` to store and retrieve the edges, which
should bring complexity closer to `O(n)`, provided that lookup is
`O(1)`.
See differential for some timings. In most files, this is expected
to give at least a 2-3x speedup for this operation, but can lead
orders of magnitude speed increase for dense meshes with a significant
number of edge creases.
Differential Revision: https://developer.blender.org/D15521
Use the C++ API to implement more of the existing C functions.
This corrects the cases where one tries to add a builtin attribute
with the wrong domain or type on curves, though a better warning
message would be helpful in the future, and also reduces duplication
of the internal logic. Not much more is possible without changing
the interface.
The display depth is used to composite Gpencil and Overlays. For it to
be stable we bias it using the dFdx gradient functions. This makes
overlays like edit mode not flicker.
The previous approach to save the 1st center sample does not work anymore
since we jitter the projection matrix in a looping pattern when scene
is updated. So the center depth is only (almost) valid 1/8th of the times.
The biasing technique, even if not perfect, does the job of being stable.
This has a few cons:
- it makes the geometry below the ground plane unlike workbench engine.
- it makes overlays render over geometry at larger depth discontinuities.
This might make the image a bit blurier but it reduces the flickering of
shiny surfaces during animation.
This uses the technique described in "High Quality Temporal Supersampling"
by Brian Karis at Siggraph 2014 (Slide 45): Reduce the exponential factor
when the history is close the bounding box border.
A few offsets were missing.
Reminder that this does not change the actual render resolution but it
reduces the VRAM consumption of accumulation buffers.
Use the new attribute API to implement the attribute remove function
used by RNA, except for BMesh attributes. Currently, removing curve
attributes from the panel in the property editor does not mark the
relevant caches dirty (for example, the cache of curve type counts),
because that behavior is implemented with the new attribute API.
Also, eventually we want to merge the two APIs, and removing an
attribute is the first function that can be partially implemented
with the new API.
Differential Revision: https://developer.blender.org/D15495
The face merging code in exact boolean made an assumption that
the tesselated original face was manifold except at the boundaries.
This should be true but sometimes (e.g., if the input faces have
self-intersection, as happens in the example), it is not.
This commit makes face merging tolerant of such a situation.
It might leave some stray edges from triangulation, but it should
only happen if the input is malformed.
Note: the input may be malformed if there were previous booleans
in the stack, since snapping the exact result to float coordinates
is not guaranteed to leave the mesh without defects.
This is the second try at this commit. The previous one had a typo
in it -- luckily, the tests caught the problem.
Previously, when creating "very large" (tens-hundreds of thousands)
amounts of objects, the Blender code that was ensuring name
uniqueness was the bottleneck. That got recently addressed (D14162),
however now sorting of IDs by their names is the remaining bottleneck.
Name sorting code in Blender is optimized for the pattern where names
are inserted in already sorted order (i.e. objects expect to get added
near the end of the list). By doing this pre-sorting of objects
intended to get created by an importer (USD and OBJ, in this patch),
this sorting bottleneck can be largely removed, especially with very
high object counts.
Windows, Ryzen 5950X, import times:
- OBJ, splash screen scene (26k objects): 22.0s -> 20.7s
- USD, Disney Moana scene (250k objects): 585s -> 82.2s (10 minutes -> 1.5 minutes)
Reviewed By: Michael Kowalski, Howard Trickey
Differential Revision: https://developer.blender.org/D15506
Geometry nodes has added the ability to modify mesh vertex groups
during evaluation (see 3b6ee8cee7). However, the armature
modifier always uses the vertex groups from the original object.
This is wrong for the modifier stack, where each modifier is meant
to use the output of the previous.
This commit makes the armature modifier use the evaluated vertex groups
if they are available. Otherwise it uses the originals like before.
Differential Revision: https://developer.blender.org/D15515
This uses the exposure to get a better approximation of the perceptual
brighness of a sample before accumulating it.
Note that we do not modify exposure of the image. Only the samples weights
are computed differently.
The swaps during accumulation were ignored because of the way the
`SwapChain<>` implementation works.
Using external references and updating them fixes the issue.
Since fd5e5dac89, the node would remove the attribute before
adding it again, which lost the vertex group status of an attribute,
meaning they were written as arbitrary attributes.
Now, the node first tries to write to attributes with the same domain
and data-type, which covers the vertex group case. Then it falls back
to removing the attribute and adding it again. Even that can fail
though, so I added an error message to make that a bit clearer.
Differential Revision: https://developer.blender.org/D15514
Use the newer more generic sampling and interpolation functions
developed recently (ab444a80a2) instead of the `CurveEval` type.
Functions are split up a bit more internally, to allow a separate mode
for supplying the curve index directly in the future (T92474).
In one basic test, the performance seems mostly unchanged from 3.1.
Differential Revision: https://developer.blender.org/D14621
Previously, curves sculpt tools only worked on original data. This was
very limiting, because one could effectively only sculpt the curves when
all procedural effects were turned off. This patch adds support for curves
sculpting while looking the result of procedural effects (like deformation
based on the surface mesh). This functionality is also known as "crazy space"
support in Blender.
For more details see D15407.
Differential Revision: https://developer.blender.org/D15407
Simplify the transform code by bundling the TransData creation, Data
recalculation, and special updates into a single struct.
So similar functions and parameters can be accessed without special
type checks.
Differential Revision: https://developer.blender.org/D15494
Calculating shortest path selection in UV edge mode was done using vertex
path logic. Since the UV editor now supports proper edge selection [0],
this approach can sometimes give incorrect results.
This problem is now fixed by adding separate logic to calculate the
shortest path in UV edge mode.
Resolves T99344.
[0]: ffaaa0bcbf
Reviewed By: campbellbarton
Ref D15511.
The conversion from Curves to CurveEval used an incorrect type
for one of the builtin attributes. Also, an incorrect default was used
for reading the nurbs_weight attribute.
The value of number sliders (e.g. the "end frame" button) wrap around to
their pre-click value when dragging them for a very long distance (e.g.
by lifting the mouse off the desk and placing it back on to keep
dragging in the same direction).
The problem is X11-specific, and due to XTranslateCoordinates using a
signed int16 behind the curtains, while its signature and the rest of
Blender uses int32. The solution is to only use XTranslateCoordinates on
(0, 0) to get the delta between the screen and client reference systems,
and applying the delta in a second step.
Differential Revision: https://developer.blender.org/D15507
Actualy 'safe' building of the base has in view layers (as part of
`BKE_main_collection_sync_remap`) would only happen when there was
already an existing one, otherwise it was skipped, and rebuilt later
(without the support for doublons) in collection sync code.
Very odd that that error was never spotted before, issue in code has
been there for a long time already. Probably only happens in rare cases
(specific conjuction of factors during remapping of old ID into itelf
new id)?
Reported by @hjalti from Blender studio. Reproducing case:
`heist/pro/shots/050_alarm/050_0160/050_0160.anim.blend`, r1407
This was caused by the world volume shader needing placeholder textures
that were not available until cache populate begins.
Adding a check and creating on the fly fixes the issue.
Code handling read/write of libraries is still particular... but trying
to call `library_runtime_reset` on a random address at readtime was an
obvious mistake I should have caught during review :(
Regression from rB7f8d05131a77.
The spreadsheet can retrieve the float selection using the same
utilities as curves sculpt brushes. Theoretically this can work in
original, evaluated, and viewer node modes, at least when the
sculpt selection attributes are able to be propagated.
Differential Revision: https://developer.blender.org/D15393
The improvements over the old implementation are:
- Improved history reprojection filter (catmull-rom)
- Use proper velocity for history reprojection.
- History clipping is now done in YCoCg color space using better algorithm.
- Velocity is dilated to keep correct edge anti-aliasing on moving objects.
As a result, the 3x3 blocks that made the image smoother in the previous
implementation are no longer visible is replaced by correct antialiasing.
This removes the velocity resolve pass in order to reduce the bandwidth
usage. The velocities are just resolved as they are loadded in the film
pass.
When the cursor grabbing was disabled, Blender's internal location
(wmWindow.eventstate) kept the location before un-hiding.
This caused the paint cursor to show in the wrong location after
adjusting the color wheel for e.g.
Calling `finish` after writing to generic attributes is currently necessary for
correctness. Previously, this was easy to forget. Now there is a check for this
in debug builds.
The issue was that geometry nodes was run on the original curves,
and set a pointer to an evaluated material id on it. The fix is to not
mix up original and evaluated data by making sure that geometry nodes
does not modify the original data.
This commit allows to select several data-blocks in the outliner and
create overrides from all of them, not only the active one.
It properly creates a single hierarchy when several IDs from a same
hierarchy root data are selected.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D15497
The issue was caused by the fact that objects with driven or animated
visibility were considered visible by the dependency graph evaluation.
This change makes it so the dependency graph evaluation is aware of
visibility which might be changing. This is achieved by evaluating the
path of the graph which affects objects visibility and adjusts to it
before evaluating the rest of the graph.
There is some time penalty to this, but there does not seem to be a
way to fully avoid this penalty.
With the production shot from the heist project the FPS drops by a
tenth of a frame (~9.4 vs ~9.3 fps) when adding a driver to an object
which keeps it visible. Note that this is a bit hard to measure since
the FPS fluctuates quite a bit throughout the playback. On the other
hand, having a driver on a visibility of a heavy object from character
and setting visibility to false gives big speedup.
Also worth noting that there is no penalty at all when there are no
animated visibilities in the scene.
Differential Revision: https://developer.blender.org/D15498
The goal is to make it possible to evaluate the graph in multiple
passes without evaluating the same node multiple times.
Currently should not be any functional changes.
WM_event_type_mask_test checks assumed ISMOUSE macro worked for any
kind of mouse event when it only accepted buttons & motion.
Now ISMOUSE checks for any kind of mouse event,
use ISMOUSE_BUTTON/WHEEL/GESTURE for more specific checks.
The ISMOUSE macro was used in situations only button events
needed to be checked.
The only functional difference would be MOUSEMOVE events were
previously accepted for these checks.
Event handling and the enum definition documents MOUSESMARTZOOM
as a gesture however it wasn't accepted by ISMOUSE_GESTURE,
instead it was added to the ISMOUSE macro.
Move the type check to ISMOUSE_GESTURE.
Use the attribute API instead of the CustomData API, to correctly
handle anonymous attributes and simplify the code. One non-obvious
thing to note is that the type counts are recalculated by the "finish"
function of the `curve_type` attribute, so they don't need to be copied
explicitly. Also, the mutable attribute accessor cannot be an reference
if we want to give it an rvalue, which is convenient in this case.
The normals are transformed, but not used. It looks like this logic was
just copied from below where the mesh is transformed for creating
emitters, which do use vertex normals.
All callers passed `false` for this parameter, making it more confusing
than useful. If this functionality is needed again in the future, a separate
function should be added.
Differential Revision: https://developer.blender.org/D15401
Oversight in b0da080c2c. The `session_uuid` operator property wouldn't
be checked by the invoke callback, and if neither the `filepath` nor the
`name` property were set, the File Browser would open.
An implementation of T73412, roughly as outlined there:
Track the names that are in use, as well as base names (before
numeric suffix) plus a bit map for each base name, indicating which
numeric suffixes are already used. This is done per-Main/Library,
per-object-type.
Timings (Windows, VS2022 Release build, AMD Ryzen 5950X):
- Scene with 10k cubes, Shift+D to duplicate them all: 8.7s -> 1.9s.
Name map memory usage for resulting 20k objects: 4.3MB.
- Importing a 2.5GB .obj file of exported Blender 3.0 splash scene
(24k objects), using the new C++ importer: 34.2s-> 22.0s. Name map
memory usage for resulting scene: 8.6MB.
- Importing Disney Moana USD scene (almost half a million objects):
56min -> 10min. Name map usage: ~100MB. Blender crashes later on
when trying to render it, in the same place in both cases, but
that's for another day.
Reviewed By: Bastien Montagne
Differential Revision: https://developer.blender.org/D14162
- The custom space target never needs B-Bone data (used by depsgraph).
- When drawing the relationship lines use the space matrix directly.
- Don't use the custom target to control the target space type dropdown.
Differential Revision: https://developer.blender.org/D9732
Add calls to a few locations that look like they may need to
initialize the Custom Space matrix, i.e. generally any place
that computes target matrices.
Differential Revision: https://developer.blender.org/D9732
Refactor D14646 to use context.active_action for the Action
Custom Properties panel, matching the already existing Action panel.
This has the advantage that it allows access to the properties of
any actions with channels visible in the Dope Sheet, e.g. Shape Keys,
Materials etc; while using just the active object is limited to just
the object animation.
Also move both panels from Item to the Action tab.
Differential Revision: https://developer.blender.org/D15288
This commit fixes several issues in add-ons UI messages extraction code:
- In multi-file modules, the script would crash because it tried to write to
the dir instead of a `translations.py` file;
- The add-on message extraction works by enabling the add-on, getting all
messages; disabling the add-on, getting all messages; then comparing the
two message sets. But often a bug happens where a class gets a
description from somewhere else in memory. I couldn’t debug that, so a
workaround is to check that the message isn’t a corrupted one before
removing it;
- `printf()` doesn't exist in Python and would crash the script;
- `self.src[self.settings.PARSER_PY_ID]` can be replaced by `self.py_file`
in class `I18n`, since a property exists to do that;
- At one point a generator was printed instead of its values, so let's
unpack the generator to get the values. Maybe the print could be
deleted entirely;
- Use SPDX license identifier instead of GPL license block, to be more in
line with other scripts from the codebase.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15474
Adds a new option to the 'Delete ShpaKeys' operator, which first applies
the current mix to the object data, before removing all shapekeys.
Request from @JulienKaspar from Blender studio.
Reviewed By: JulienKaspar
Differential Revision: https://developer.blender.org/D15443
This commit removes the use of PolySpline for resampling curves and
replaces it with the length parameterization utility for that purpose.
I didn't test performance, but I would expect the shrinking to be
slightly faster because I reused some arrays to avoid allocating
them for every curve. I noted some potential improvements in
the "add curves" function.
Differential Revision: https://developer.blender.org/D15342
This commit ports the fillet curves node to the new curves data-block,
and moves the fillet node implementation to the geometry module to help
separate the implementation from the node.
The changes are similar to the subdivide node or resample node. I've
resused common utilities where it makes sense, though some things like
the iteration over attributes can be generalized further. The node
is now multi-threaded per-curve and inside each curve, and some buffers
are reused per curve to avoid many allocations.
The code is more explicit now, and though there is more boilerplate to
pass around many spans, the more complex logic should be more readable.
Differential Revision: https://developer.blender.org/D15346
These mutable pointers present problems with ownership in relation to
proper copy-on-write for attributes. The simplest solution is to just
remove them and retrieve the layers from `CustomData` when they are
needed. This also removes the complexity and redundancy of having to
update the pointers as the curves change. A similar change will apply
to meshes and point clouds.
One downside of this change is that it makes random access with RNA
slower. However, it's simple to just use the RNA attribute API instead,
which is unaffected. In this patch I updated Cycles to do that. With
the future attribute CoW changes, this generic approach makes sense
because Cycles can just request ownership of the existing arrays.
Differential Revision: https://developer.blender.org/D15486
Missing Ui refresh when property is accessed through shortcut.
Use RNA_def_property_update to solve this.
Differential Revision: https://developer.blender.org/D15431
Similar to snapping to the world origin in the 3D viewport. This can be found
in the Shift+S pie menu and UV > Snap menu.
Differential Revision: https://developer.blender.org/D15055
Create a transform conversion type that only considers the Vertex
Custom Data.
This reduces the complexity of converting Meshes and slightly
optimizes the transformation.
After becb1530b1 the new curves object type isn't hidden
behind an experimental flag anymore, and other areas depend on this,
so disabling curves at compile time doesn't make sense anymore.
Adding the `FCURVESONLY` filter in the filter function of the Grease
Pencil dopesheet prevents calls to F-curves related functions to grease
pencil channels, thereby fixing the crash.
Reviewed By: antoniov, sybren
Maniphest Tasks: T99732
Differential Revision: https://developer.blender.org/D15490
Instead of allocating a single 0 char, set the `char *` DNA pointer to
null. This avoids the overhead of allocating and copying single-bytes.
rBeed45b655c9f didn't do this for safety reasons, but I checked the
existing uses of this behavior in DNA/RNA. Out of 43 total `char *`
members, this change only affects 7 recently added properties.
For a complete list, see the patch description.
Differential Revision: https://developer.blender.org/D14779
Semantically it is more correct as the cache does not modify the ID.
There is need to do couple of const casts since the BKE (which is in C)
does not easily allow to iterate into f-curves of const ID.
Should be no functional changes.
Previously, things like materials, symmetry, and selection options
stored on `Curves` weren't copied to the result in nodes like the
subdivide and resample nodes. Now they are, which fixes some
unexpected behavior and allows visualization of the sculpt mode
selection.
In the realize instances and join nodes the behavior is the same as
for meshes, the parameters are taken from the first (top) input.
I also refactored some functions to return a `CurvesGeometry` by-value,
which makes it the responsibility of the node to copy the parameters.
That should make the algorithms more reusable in other situations.
Differential Revision: https://developer.blender.org/D15408
When a query begins, the current visibility result buffer needs to be
associated with the currently active Render Pass. The MTLContext and
MTLCommandBuffer are responsible for ensuring new render pass objects are
created if the visibility state changes.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D15356
The Nishita sky texture currently only allows moving the sun to the zenith.
The problem is if you want to animate the passing of a full night-day-night
cycle. Currently it's not easy to do due to this limitation.
The patch makes it so users can easily animate the sun moving from sunrise
to sunset by expanding the max sun elevation to go 360° instead of 90°.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D13724
No user visible changes expected.
Merges the tree row and grid tile button types, which were mostly doing
the same things. The idea is that there is a button type for
highlighting, as well as supporting general view item features (e.g.
renaming, drag/drop, etc.). So instead there is a view item button type
now. Also ports view item features like renaming, custom context menus,
drag controllers and drop controllers to `ui::AbstractViewItem` (the new
base class for all view items).
This should be quite an improvement because:
- Merges code that was duplicated over view items.
- Mentioned features (renaming, drag & drop, ...) are much easier to
implement in new view types now. Most of it comes "for free".
- Further features will immediately become availalbe to all views (e.g.
selection).
- Simplifies APIs, there don't have to be functions for individual view
item types anymore.
- View item classes are split and thus less overwhelming visually.
- View item buttons now share all code (drawing, handling, etc.)
- We're soon running out of available button types, this commit merges
two into one.
I was hoping I could do this in multiple smaller commits, but things
were quite intertwined so that would've taken quite some effort.
No user visible changes expected.
Similar to rBc355be6faeac, but for view items now instead of the view.
Not much of the item code is ported to use it yet, it's actually a bit
tricky for the most part. But just introducing the base class already
allows me to start unifying the view item buttons (`uiButTreeRow` and
`uiButGridTile`). This would be a nice improvement.
Fix the issue where undoing a "duplicate NLA strip" operation would
require two undo steps.
The cause of this was that the operator was not using the operator macro
system to combine both the duplication and the translate operators into
one. Instead, the old code was simply manually invoking invoking the
translate operator after the duplicate operator had completed.
This patch requires the default keymap to be modified to include the two
new macro operators, `NLA_OT_duplicate_move` and
`NLA_OT_duplicate_linked_move` in favour of the old keymap that simply
called `NLA_OT_duplicate` and passed along a `linked` argument.
`duplicate_move` and `duplicate_move_linked` are two different enough
operations to justify having their own operators from user's
point-of-view, especially since we cannot yet have different tool-tips
based on an operator's settings.
Reviewed By: sybren, mont29
Differential Revision: https://developer.blender.org/D15086
Add `FCurveKeyframePoints.clear()` method to delete all keyframe points
from an FCurve.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D15283
Currently Blender generates mipmaps that override the existing ones.
This patch disables generating new mipmaps for compressed textures.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D14459
Not sure why multiple pools were created: the pool should be able to
handle two sets of tasks.
Perhaps non-measurable improvement in terms of performance but this
change simplifies code a bit.
Was accidental regression in rBed9b21098dd27bf9364397357f89b4c2648f40c2
Remove the input slider's PROP_FACTOR subtype in favor of the default to
align with other IOR sliders. This provides much better control when
dragging the value with the mouse.
Differential Revision: https://developer.blender.org/D15477
Drop events ignored the cursor coordinates, under the assumption that
cursor motion events would also be sent to update the cursor location.
This depended on the behavior of the compositor, it failed for Sway
but worked for Gnome-shell & River.
Resolve by making use of the drop events cursor coordinates.
Due to the ordering of the checks, assert and async were not highlighted
in the editor, even though they were in the list of keywords.
Differential Revision: http://developer.blender.org/D15483
Although e.g. in the dopesheet there is no specific concept of
active action, displaying panels requires singling out one action
reference. It is more efficient and clearer to implement this
natively in the context rather than using selected_visible_actions[0].
- In the Action Editor the action is taken from the header.
- In the Dope Sheet the first selected action is chosen, because
there is no concept of an active channel or keyframe.
- In the Graph Editor the action associated with the active curve
is used, which should also be associated with the active vertex.
This case may be different from selected_visible_actions[0].
Differential Revision: https://developer.blender.org/D15412
The real RNA path_resolve method supports indexing lists,
but the python version on the Context object does not. This
patch adds the missing feature for completeness.
Differential Revision: https://developer.blender.org/D15413
* Allows Apple Silicon machines to use 8-wide BVH, which the release notes
mention give an 8% performance boost.
* An update to this version is also required for OpenPGL.
This patch includes contributions from Jason Fielder and Sebastian Herholz.
Ref D15286, T98555
Differential Revision: https://developer.blender.org/D15482
The tooltips from the Add Node menu were extracted, but not translated.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15467
openSubdiv_init() would detect available evaluators before any OpenGL context
exists, causing a crash with libepoxy. This test however is redundant as we
already check the requirements on the Blender side through the GPU API.
To simplify things, completely remove the device detection in the opensubdiv
module and reduce the evaluators to just CPU and GPU. The plan here is to move
to the GPU module abstraction over OpenGL/Metal/Vulkan and so all these
different backends no longer make sense.
This also removes the user preference for OpenSubdiv compute device, which was
not used for the new GPU subdivision implementation.
Ref D15291
Differential Revision: https://developer.blender.org/D15470
The stroke code now supports raycasting the original mesh.
This fixes anchored mode not working for negative brushes,
which might move the mesh out of the initial mouse cursor
position.
The scene spacing code was failing to
check if a raycast failed, which can happen
when sculpting the edges of objects in negative
mode.
Note I removed what I suspect was a hack put
in to fix this, spacing was clamped
to 0.001 scene units.
Scene spacing mode is actually quite broken,
so it will be fixed in a series of phases.
Fix for {T99039}.
The problem was that `AUD_mixdown` and `AUD_mixdown_per_channel` were returning pointers to freed memory.
Two key changes are made:
1. The return value of those functions now simply return a bool as to whether the operation succeeded, instead of an optional error string pointer.
2. The error string buffer is now passed into the function to be filled in case an error occurs. In this way, the onus of memory ownership is unamibiguously on the caller.
Differential Revision: https://developer.blender.org/D15260
Instead of removing the `bgl` module, set all it's functions to stubs
so importing `bgl` or any of it's members doesn't raise an error.
This avoids problems for scripts that import bgl but don't call it's
functions when running in background mode.
Simplify logic for freeing a NULL pointer. While no null-pointer
de-reference was performed, this wasn't as so obvious as the pointer
was passed to MEM_lockfree_allocN_len before checking for NULL.
NOTE: T99744 claimed the a NULL pointer free was a vulnerability,
while I can't see evidence for this - exiting early makes it clearer
the memory isn't accessed.
*Details*
- Add MEMHEAD_LEN macro, avoids redundant NULL check.
- Use "UNLIKELY(..)" hint's for error cases
(freeing NULL pointer and checking if `leak_detector_has_run`).
First time reporting? See [tips](https://wiki.blender.org/wiki/Process/Bug_Reports).
* Use **Help > Report a Bug** in Blender to fill system information and exact Blender version.
* Test [daily builds](https://builder.blender.org/) to verify if the issue is already fixed.
* Test [previous versions](https://download.blender.org/release/) to find an older working version.
* For feature requests, feedback, questions or build issues, see [communication channels](https://wiki.blender.org/wiki/Communication/Contact#User_Feedback_and_Requests).
* If there are multiple bugs, make multiple bug reports.
- type:textarea
id:body
attributes:
label:"Description"
hide_label:true
value:|
**System Information**
Operating system:
Graphics card:
**Blender Version**
Broken: (example: 2.80, edbf15d3c044, master, 2018-11-28, as found on the splash screen)
Worked: (newest version of Blender that worked as expected)
**Short description of error**
**Exact steps for others to reproduce the error**
Based on the default startup or an attached .blend file (as simple as possible).
- type:markdown
attributes:
value:|
### Help the developers
Bug fixing is important, the developers will handle reports swiftly. For that reason, carefully provide exact steps and a **small and simple .blend file** to reproduce the problem. You do your half of the work, then we do our half!
Guides to [contributing code](https://wiki.blender.org/index.php/Dev:Doc/Process/Contributing_Code) and effective [code review](https://wiki.blender.org/index.php/Dev:Doc/Tools/Code_Review).
By submitting code here, you agree that the code is (compatible with) GNU GPL v2 or later.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
