Since those nodes did not exist for shader node trees before,
I implemented them directly as "function nodes". Those could later
be used in shader node trees as well.
Differential Revision: https://developer.blender.org/D7424
This makes a subset of the shader nodes available in simulation node trees.
More can be made available in the future, but we might not be able to actually
implement all the nodes before the release.
For now, their name remains `ShaderNode...`. We should rename them to
e.g. `FunctionNode...` and move them to a separate folder in the future.
Differential Revision: https://developer.blender.org/D7422
Allows to open newer files in older Blender after new distortion model
has been added.
It will behave as if this is a polynomial model with all 0 coefficients
which are then being refined and assigned explicitly after solving the
motion.
The loop of datablocks was using the scene datablock (3D View) only, but all others datablocks were ignored.
Now the loop consider any annotation datablock.
This is part of T73324.
The shapes and colors of the sockets will most likely change later on.
This script can be used to create a node with the new socket types:
```
import bpy
class MyCustomNode(bpy.types.Node):
bl_idname = 'CustomNodeType'
bl_label = "Custom Node"
def init(self, context):
self.inputs.new('NodeSocketEmitters', "Emitters")
self.inputs.new('NodeSocketEvents', "Events")
self.inputs.new('NodeSocketForces', "Forces")
self.inputs.new('NodeSocketControlFlow', "Control Flow")
self.outputs.new('NodeSocketEmitters', "Emitters")
self.outputs.new('NodeSocketEvents', "Events")
self.outputs.new('NodeSocketForces', "Forces")
self.outputs.new('NodeSocketControlFlow', "Control Flow")
bpy.utils.register_class(MyCustomNode)
if len(bpy.data.simulations) == 0:
bpy.data.simulations.new("Simulation")
sim = bpy.data.simulations[0]
sim.node_tree.nodes.new("CustomNodeType")
```
Differential Revision: https://developer.blender.org/D7349
The main difficulty with adding these types is that they are the first sockets types
that reference ID data in their `default_value`. That means that I had to add some
new logic in a few places to deal with reference counting. I hope I found all the places...
It seems to work fine in my tests.
For now these socket types can only be created using a script like the one below:
```
import bpy
class MyCustomNode(bpy.types.Node):
bl_idname = 'CustomNodeType'
bl_label = "Custom Node"
def init(self, context):
self.inputs.new('NodeSocketObject', "Object")
self.inputs.new('NodeSocketImage', "Image")
bpy.utils.register_class(MyCustomNode)
if len(bpy.data.simulations) == 0:
bpy.data.simulations.new("Simulation")
sim = bpy.data.simulations[0]
sim.node_tree.nodes.new("CustomNodeType")
```
After running the script, go to the simulation editor and select the newly created simulation.
---
We might want to change `readfile.c` so that linked objects/images are only loaded,
when the socket is not connected. Otherwise it can be tricky to figure out why certain
id data blocks are still referenced by the node tree later on.
Differential Revision: https://developer.blender.org/D7347
During recent refactoring of the edit weight overlay we moved a
assignment before it was valid. Making everything one frame off what
resulted in a flashing frame during TAA, not drawing the overlay until a
second action happened, making overlays too bright.
The reason whas that the painting overlay wasn't initialized in the
first sample, but the draw passes and groups were filled. Resulting in
rendering the overlay twice or not at all.
This change moves the assignment to where it is valid.
Limit offsets, so each strip contains at least 1 frame of content.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D7288
Feature can be enabled or disabled in timeline view menu item "Show F-Curves".
Author a.monti
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D7205
Don't set 'special preview' or Solo mode if scrubbing in scrubbing region.
Author: a.monti
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D7234
Following up to b555b8d.
Building Blender with hidden symbols but using libraries with visible symbols
was giving linker warnings, specifically for USD. So revert that for now, as
it was not needed for the bugfix.
Hide USD symbols (some of which are not in the USD namespace) to avoid potential
conflicts. May potentially help with AMD OpenCL issues in T74262.
Pointer search buttons created with `uiItemPointerR()` (which allows
also passing a collection property to search in) did not work with the
split property layout (i.e. `uiLayout.use_property_split`).
For example vertex group search buttons typically use this.
Note that decorators (`uiLayout.use_property_decorate`) are not
supported yet. Although if they are enabled, the decorator column is
still created to keep the layout alignment visually intact. Also re-uses
the existing hack to allow placing multiple items in the row before the
decorator column.
Needed for some in-progress changes to the modifier stack UI.
When updating the active button, the search data wasn't updated, so it
kept using the old pointers. A check in `ui_rna_collection_search_cb()`
relied on this incorrect behavior so I had to fix that too. Note that
the previous commit was also needed for the second fix to work.
Caused by c46dcdf887.
If the `uiButStore` data was freed after the buttons/blocks were updated
from previous instances (see `UI_block_update_from_old()`), e.g. by
delaying that to the "afterfuncs" (`ui_apply_but_funcs_after()`), the
data would get lost. As result, the button pointers that the API is
supposed to keep valid would point to freed memory.
This wasn't an issue so far since the API didn't happen to be used this
way. That changes with the next commit.
Rather than using the last state of the tablet, we now query the history of
pointer events so strokes can follow the pen even if Blender does not handle
events at the same rate.
Differential Revision: https://developer.blender.org/D6675
It was sometimes set before reading preferences, now it's passed to GHOST every
time preferences are read.
Differential Revision: https://developer.blender.org/D5641
Resolves the following issues:
- For the first time you save a .blend file, there was no feedback.
- If the file fails to save (eg "No space left on device") the status
bar message replaces the error with an invalid "Saved" message.
While there is a popup, the user may cancel it with mouse motion
and be left with the status bar message saying the file saved.
D7371 by @XDroid with edits.
Removal of 'Translation' checkbox. Enable translation options when selecting non-English languages.
Differential Revision: https://developer.blender.org/D7210
Reviewed by Brecht Van Lommel
The behavior for subpanels was incorrect, and the ideal behavior isn't even clear.
This disables the "collapse all" ctrl click feature for panels that have parents.
Differential Revision: https://developer.blender.org/D7355
These changes only have an effect when the experimental Undo Speedup preference
is enabled.
* For DEG_id_tag_update, accumulate recalc flags immediately before the undo
push happens instead of afterwards. Otherwise the undo state does not
contain enough flags, and the current state may contain too many flags.
This also means we call DEG_id_tag_update after undo with the accumulated
flags to ensure they are flushed to other datablocks.
* For undo, accumulate recalc flags in id->recalc and clear accumulated flags
immediately. Not clearing would cause circular behavior where accumulated
flags may never end up being cleared.
This matches what happens after an undo push where these are also cleared,
indicating that the undo state and current in-memory state match exactly.
* Don't change id->recalc of identical datablocks, it should not be needed.
There is one exception for armatures where pointers across datablocks
exist which otherwise would cause problems. There may be a better solution
to this but it seems to work in agent 327 production files.
* This contains a change in undofile.c to avoid detecting all datablocks as
changed for the first of the two undo steps, where we restore to the state
of the last undo push before going to the one before.
Without this the whole system is much less efficient. However this is unsafe
in the sense that if an app handler or operators edits a datablock after an
undo push, that change will not be undone.
It can be argued that this is acceptable behavior, since a following undo push
will include that change and this may already have unexpected side effects.
Ref T60695
Differential Revision: https://developer.blender.org/D7339
There is no garuantee 'outliner_find_id()' can find those corresponding
TreeElements, safeguard against failure now.
note: not sure why this was no problem in Release builds? (could only
reproduce crashes in Debug builds...)
Maniphest Tasks: T75471
Differential Revision: https://developer.blender.org/D7365
Since rBcf258b02f449, only wires and edges that are mapped to the
original mesh were drawn if the mesh was modified by modifiers.
Above commit was only meant for showing orig wires for paint mask
overlays [where final wireframe is not desired], so now only use
MR_EXTRACT_MAPPED when we are in a paint mode.
Maniphest Tasks: T75343
Differential Revision: https://developer.blender.org/D7333
Issue was that the noise simulation was trying to bake with a minimized domain size (adaptive domain initializes domain with size (1,1,1)). Similarly to the base resolution bake, there should be no noise baking happening at those domain sizes - a domain at this size is considered empty.
This reverts commit 58e20b432a.
Was calling discard twice, tsk.
Although for some reason it did quiet the leak.
Reverting because this is causing a crash.
The symmetrize operator now tries to make sure that the armature
constraints are correctly mirrored.
Before it would only mirror the subtargets for the constraints (and that
failed too in some cases).
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D6009
Otherwise file browsers do not recognize the Blender executable. This is
already done for official releases.
We leave it off for non-portable builds, since that's how Linux distribution
packages will typically build Blender and we can continue to follow the OS
default there. Using a file browser to launch executables from e.g. /usr/bin
would be rare as wel.
Differential Revision: https://developer.blender.org/D7363
Other types of datablocks pointing to UI datablocks is unsupported, so
there is no need to store them in fd->libmap. With the experimental undo
speedup enabled preserving such pointers was done. But it didn't work in
2.82 and such pointers are easily lost in cases other than undo.
Differential Revision: https://developer.blender.org/D7329
The issue was that the code tried to use the bones transformation matrix
as a rotation matrix. This works fine as long as the scale is 1.
Now we simply make sure that we only get a pure rotation matrix when
extracting it for the bone's transformation matrix.
The root of the issue was caused by mesh which was a result of to_mesh()
had the same edit_mesh pointer as the input object, causing double-free
error.
This fix makes it so result mesh does not have edit mesh pointer.
Motivation part behind this is to make the result of to_mesh() to be
somewhat independent from the input.
Differential Revision: https://developer.blender.org/D7361
Starting select linked failed when the selected vertex or edge
was it's self delimiting.
Support using these elements for linked select
as long as they're part of an isolated selection.
When the modal operator passes events, free the internal state of
the operator as we can't be sure those events don't cause the mesh data
to be re-allocated or removed.
Longer term it might be best to make this into a tool since
the main purpose of this operator is to run other actions.
The 10g Intel/Win driver doesn't work well with our emulated
intermediate mode. This patch alters the drawing of the drag widget of
the panels to reduce unneeded drawing.
The previous method would draw 16 boxes per widget. This new way would
cache this drawing in a GPU batch and just move the matrix around.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7345
Existing code for ungrouping did not correctly handle user counters:
- counter for the group was not decremented
- counters for containing nodes were not incremented
The latter resulted in losing some nodes after orphan cleaning or several save/reload cycles.
The bug did not have destructive consequences until recently,
because it was compensated by another bug (fixed in rBe993667a46c2).
Maniphest Tasks: T74665, T74682
Differential Revision: https://developer.blender.org/D7332
For a real-world distortion the payload is quite uniformly
distributed across scanlines. Surely, in the corners more
iterations of minimizer is needed, but that happens in threads
without scheduling overhead.
Need to communicate available number of threads to the camera
intrinsics implementation, otherwise default value of 1 is used.
Must have been single-threaded for a very long time.
When setting the current playback time in BKE_sound_play_scene we didn't
account for the frame length. So the current frame/time would be wrong
when we asked the audio playback what time it was.
This would lead to playback being offset when using time remapping and
AV sync.
Reviewed By: Richard Antalik and Sybren A. Stüvel
Differential Revision: http://developer.blender.org/D7248
Before this commit, baking an action would only insert keys that are
necessary (i.e. using `INSERTKEY_NEEDED`). When baking to the current
Action, if there are no constraints that influence the final animation,
there are no additional keys necessary. This makes it appear as if
nothing happened. However, when baking to a new Action every additional
frame is necessary and thus a key is added for every frame.
@mont29 and I agreed that this behaviour is confusing, so this commit
changes the behaviour such that baking to the current action and to a
new action result in the same baked animation (that is, keyed on every
frame).
This was already fixed in rB985f33719ce9 once.
But resurfaced after rB7070e4c15e6c [which just reverted a bit too much
;)].
Spotted while looking into T75263.
Differential Revision: https://developer.blender.org/D7308
Splits up wm_xr.c into multiple files in their own folder:
source/blender/windowmanager/xr. So this matches how the message bus and
gizmo code have their own folder and files.
This allows better structuring and should make the code scale better.
I rather do this early on than to wait until we end up with a single,
huge file.
Also improves a bit how data is prepared and updated for drawing.
- Adds select menu
- Removes undo/redo controls
- Adds delete menu
- Refactor
- Combines font and text menu
The goal is to match other edit menus better and match the text editor.
Note this only changes cases where the variable was declared inside
the for loop. To handle it outside as well is a different challenge.
Differential Revision: https://developer.blender.org/D7320
The 'name' parameter of `BKE_idtype_idcode_from_name()`, and the `str`
parameter of `idtype_get_info_from_name()`, are expected to be the
'user visible name' of an `IDTypeInfo` struct. This is made clearer in
the code by renaming those parameters to `idtype_name` and mentioning
it in the documentation of the `BKE_idtype_idcode_from_name()`
function.
Differential Revision: https://developer.blender.org/D7317
The `BKE_animsys.h` and `anim_sys.c` files already had a an "AnimData
API" section. The code in that section has now been split off, and
placed into `BKE_anim_data.h` and `anim_data.c`.
All files that used to include `BKE_animsys.h` have been adjusted to
only include the animation headers they need (sometimes none).
No functional changes.
The island `axismtx` is only necessary in some transform modes.
In the case of `Shrink/Fatten`, the calculated `axismtx` brings an
undesirable result.
This commit rearrange the struct `TransIslandData` in order to
calculate and reference only the arrays that will be used for each
transform mode.
Differential Revision: https://developer.blender.org/D7305
There is no guarantee that depsgraph is ran between two undo steps, so
when re-using an existing data-block we should never wipe completly its
recalc flags, but instead complement them with new ones from accumulated
'storage' as needed.
It should be possible to `#include` any header without having to worry
about its dependencies.
I didn't go and check all include files for this, just the ones that caused
me errors while I was refactoring the `anim_sys.c` file.
No functional changes.
Follow up of b2ee1770d4 and 10c2254d41, part of T74432.
Now the area and region naming conventions should be less confusing.
Mostly a careful batch rename but had to do few smaller fixes.
Also ran clang-format on affected files.
The files are now split up into the following sections:
- `BKE_anim_path.h` and `anim_path.c` for path/curve functions.
- `BKE_anim_visualization.h` and `anim_visualizationanim_path.c` for
animation visualization (mostly motion paths).
- `BKE_duplilist.h` for DupliList function declarations. These were
already implemented in `object_dupli.c`, so they were rather out of
place being declared in `BKE_anim.h` in the first place.
No functional changes.
My compiler (GCC 7.5.0) was warning about these variables potentially not
being initialised. Since the function is highly complex, instead of
analysing it I just trust my compiler and added initial values.
This should be no functional change.
This was only reported for the 'Change Active Layer' operator [which was
not setting the channel as selected in the dopesheet], but this is also
the case elsewhere [where BKE_gpencil_layer_active_set is used], namely:
- gp_layer_remove_exec
- gp_layer_copy_exec
- gp_merge_layer_exec
- gp_layer_change_exec
- gp_layer_active_exec
- gp_stroke_separate_exec
We could set GP_LAYER_SELECT "by hand" in
BKE_gpencil_layer_active_set(), but there is already
animchan_sync_gplayer() that does that. For this, we need the
NA_SELECTED notifier though.
Maniphest Tasks: T75250
Differential Revision: https://developer.blender.org/D7311
There was one function to access both pose/edit bones,
which returned a void pointer type.
Split these into 3 functions which return EditBone, bPoseChannel or Bone
types.
Internally the logic is still shared, this just makes it clearer to
callers which type is expected.
Also use more conventional prefix for picking API:
- ED_armature_pick_(ebone/pchan/bone)
- ED_armature_pick_(ebone/pchan/bone)_from_selectbuffer
In Blender 2.81 we update and draw all nodes inside the view planes.
When navigating with a pen tablet after an operation that tags the whole
mesh to update (like undo or inverting the mask), this introduces some
lag as nodes are updating when they enter the view. The viewport is not
fully responsive again until all nodes have entered the view after the
operation.
This commit delays nodes updates until the view navigation stops, so the
viewport navigation is always fully responsive. This introduces some
artifacts while navigating, so it can be disabled if you don't want to
see them.
I'm storing the update planes in the PBVH. This way I can add support
for some tools to update in real-time only the nodes inside this plane
while running the operator, like the mesh filter.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6269
All DirectX management happens on Ghost level now, higher level code can
just assume everything is OpenGL (except of the upside-down drawing that
still needs to be done for DirectX). This is similar to how the
metal-layer is hidden outside of Ghost.
The Ghost-XR graphics binding for DirectX is responsible for managing
the DirectX compatibility now.
This adds the automasking options to the Sculpt Tool options in a way
that they affect all brushes. This is more convenient when working with
some of these options while switching brushes as they don't need to be
enabled/disabled per brush.
An automasking option is enabled if it is enabled in the brush or in the
sculpt options.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7304
The root cause of the issue reported in T74983 is that an `IDNode` would
not be marked as user-modified. This marking happened while looping over
outgoing relations of one of its operation nodes. Since rBff60dd8b18ed
unused relations are removed, and as a result the `IDNode` would not be
marked.
The solution was to move the responsible code outside the loop; this is
probably a good idea anyway, as the code did not actually use the
looped-over relations at all, and was thus repeated unnecessarily.
With this brush option it is possible to mask the boundary vertices of
all face sets. This is especially useful in the cloth brush, where face
sets can be used to simulate seams between different patches of cloth
and produce different patterns and effects.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7230
Allows to know what level sculpting has been done after the value has
been changed in the MultiresModifierData.
No functional changes, just preparing code to have everything needed
for propagation undo.
Differential Revision: https://developer.blender.org/D7307
Before this change it was not possible to have base geometry
and grid coordinates to be stored in the same undo step.
Differential Revision: https://developer.blender.org/D7298
This fixes the following issues:
- Previously, the face set from the active vertex was used directly. Vertices always return the most recently created face set, so in some cases there may be some face sets that were not possible to select as active. Now the active face set is set in the ray intersection, so it always matches the face under the cursor.
- When drawing face sets they were set per vertex, so it was not possible to paint one face at a time. Now face sets are painted per poly when using the brush on meshes, testing the distance to the center of each poly.
- The code for the active vertex on PBVH_GRIDS was not correct, so I also fixed that to test if everything was working correctly.
{F8441699}
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7303
The brush was allocating new memory for storing the displacemnets at the
beginning of each stroke step and not freeing them.
Reviewed By: jbakker
Maniphest Tasks: T75121
Differential Revision: https://developer.blender.org/D7254
As the main use case of this feature is to work with cloth, using this
curve makes more sense than a smoothstep to simulate cloth tension near
the edges.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7262
Due to legacy this overlay was implemented twice (Edit Mesh and Weight
Painting) with different results. This patch consolidates both drawing
and uses only the Weight Painting drawing.
Due to legacy this overlay was implemented twice (Edit Mesh and Weight
Painting) with different results. This patch consolidates both drawing
and uses only the Weight Painting drawing.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7289
Should make it a bit more clear overview of what is going on in this
module. While some of the details might still be missing, having some
sort of top-level overview is better than nothing.
Differential Revision: https://developer.blender.org/D7300
Made it so grids array is properly allocated when first node in the
undo list does not contain grid data.
Differential Revision: https://developer.blender.org/D7299
This patch adds an AVX implementation of Perlin noise in Cycles.
An avxi type was also added as a utility based on the respective
type in Intel Embree.
Only 3D and 4D noise were implemented, there is no benefit for
utilizing AVX in 1D and 2D noise. The SSE trilinear interpolation
function was used in the AVX implementation because there is no
benefit from using AVX in interpolating the last three dimensions.
Differential Revision: https://developer.blender.org/D6680
This also shows the node tree in the Simulation Editor.
There is a new operator to add a simulation.
One debatable aspect of this patch is how I integrated the `SpaceNodeEditor.simulation`
property in RNA. I decided to wrap the existing `id` property, because the description
says `Data-block whose nodes are being edited`, which is exactly what is happening here.
Differential Revision: https://developer.blender.org/D7301
strips
This uses the new "selected_nla_strips" context member in
UI_context_copy_to_selected_list().
bonus: this also makes the "Copy To Selected" button operator [in the
button context menu] work for anything NLA Strip related.
Maniphest Tasks: T66494
Differential Revision: https://developer.blender.org/D7281
tile
This happened when the UDIM tiled image needed to be colormanaged, so
- when you set up the image as sRGB, then save as EXR/HDR/...
- other way around as well: when you set up the images as Linear then
save as PNG/JPG/...
Reason being that for UDIM tiled images, `image_save_single` is called
multiple times [once for each tile] and everytime `image_save_post` will
fire the `IMA_SIGNAL_COLORMANAGE` signal which clears the cache if any of
the above two is the case. Without the cache, the next tiles cannot be
saved.
Now determine if the colorspace changed from
`image_save_single`/'image_save_post' and only fire
IMA_SIGNAL_COLORMANAGE once from BKE_image_save in the end.
(thx @brecht for suggesting this alternative to the original fix)
Maniphest Tasks: T75234
Differential Revision: https://developer.blender.org/D7296
This basically generalizes what was being done in `write_mesh`,
since we need to clean up ID tags anyway, it's easier to do it for all IDs.
Then ID write funcs themsleves can do whatever they want on the passed
struct, without risking interferring with regular Blender operations.
Note that Text write function is doing a suspicious change on one of its
flags, but this seems to be by-passed anyway by read code currently, so
think it's OK to not do that on orig data-block.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7294
Made it so there is a single UNDO node in the list which has
both original and modified mesh state.
Makes it easier to achieve "interleaved" undo nodes stored in
the undo step (as opposite of either storing geometry or other
data).
Should be no functional changes, just preparing for an upcoming
work to support undo of operation like Apply Base.
Differential Revision: https://developer.blender.org/D7290
Actually, begin will do the entire initialization.
Refine will only refine if there is a topology refiner associated
with the Subdiv descriptor.
Allows to refine Subdiv to new coarse positions without touching
displacement evaluation. Will be needed to update SubdivCCG during
sculpt undo.
Change to recent renaming of "Edge Collapse" as it has multiple uses,
as it collapses edge-rings, but isn't limited to collapsing single edges,
it can be used to collapse faces with arbitrary topology.
The name "Collapse Regions" is too vague, users might not think to use
this to collapse edge-rings.
Use a more verbose name "Collapse Edges & Faces", referencing edge-rings
in the tool-tip.
This is useful for collapsing regions of faces & edges,
similar to a 'Merge -> Collapse' which can operate on multiple regions,
merging UV's so they don't need to be manually corrected.
The name & description didn't mention this.
This implements the Sculpt Mode API functions needed for Face Sets and
visibility management for PBVH_GRIDS. No major changes were needed in
the operators and the sculpt mode code. This implementation stores the
face sets in the base mesh, so faces created in higher subdivision
levels can't be modified individually. Also, we are not checking for
multiple face sets per vertex (that can be added in the future), so
relax tools don't work yet. The rest of the features (paint, undo,
visibility operators..) work as expected.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7168
This adds the Voxel Mode to the current remesh modifier. It works
exactly the same way as the voxel remesh operator and uses the same
properties to control the remeshing. We can exand this with more options
in the future (fix poles, reprojection...)
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7292
The original code has two logics, extrude the end points or duplicate points (making new splines).
Now all the logic has been redone by extruding contiguous selected segments.
Fix T47169
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D6982
This operator lets the user control the voxel/detail size of the voxel remesher directly from the 3D view in a similar way the Brush radius and strength are controlled. The shorcut from sculpt mode is Shift + R (similar to Shift + F for brush strength).
It shows a grid that represents the real voxel size of the object. The grid and the text are automatically aligned to the view to avoid rendering all voxels with thousands of lines.
It also has a slow mode when pressing shift that works like the slow mode of the brush radius control.
This operator controls the value changes sensitivity automatically to avoid jumping to extremelly high resolutions and run out of memory.
This way, adjusments done in lower voxel sizes are more precise. Pressing Ctrl disables this functionality and allows changing the voxel size directly in a linear way.
Reviewed By: jbakker, #user_interface, billreynish
Differential Revision: https://developer.blender.org/D6449
The text and icon were supposed to change but didn't reliably, which was
a race condition I think. It depended on how fast the OpenXR runtime
would transition the session state.
This also makes sure the correct notifier is sent on session exit.
Draw batch extraction wrongly assumed that when mapped extraction
happened that all original data could be found. This is not the case as
mapped extraction is also enabled when part of the data is present.
This fix does additional nullptr checks.
This implements a new builtin node tree type called `SimulationNodeTree`.
It is not yet embedded in the `Simulation` data block.
This is part of T73324.
The `WITH_NEW_SIMULATION_TYPE` cmake option is used to control whether `Simulation Editor` is shown in the editors menu.
Disabling the rna code with this option was a bit tricky, because the node tree type stores a reference to the rna type.
I could do the `#ifdef WITH_NEW_SIMULATION_TYPE` everywhere, but I'm not sure if it is worth the effort.
Currently there is only the group node, which is unusable, because there are no other nodes.
I'll submit those for review separately.
Differential Revision: https://developer.blender.org/D7287
EEVEE and Workbench both had the same issue that they continue with the
last sample when leaving navigating. This is ok for regular meshes as
they are all the same. For multiresolution it ain't as a low res version
of the mesh is used during navigation.
This patch also resets the AA samples when the user leaves navigation.
As the 'M' key is free, it's convenient to use for the merge menu,
especially since this contains "Merge by Distance",
a frequently used action.
Use 'Alt-M' for a new split menu, following our convention of Alt being
used for opposite functionality.
Also move merge/split menu's into the "Mesh" menu as neither operate
solely on a single mesh element type.
The edge split operator can now split faces & edges
from selected vertices.
This has the same functionality as manually ripping all
faces and edges away from a vertex.
This means symbols from Blender itself and most external libraries. We can't
just hide all because that breaks some libraries. The better solution would
be to rebuild all library dependencies with hidden visibility.
Fixes T75223: Luxrender add-on failing to load on macOS
Mesh writes a modified copy, which meant recalc_undo_accumulated was never
cleared on the actual datablock. Also clear mesh->runtime on write to avoid
detecting changes, since it's cleared on read anyway.
Differential Revision: https://developer.blender.org/D7274
Clear is_identical_future before adding a next undo step, to avoid wrong
values for cases where we undo and then add a step with different changes
than what was previously the next step.
Ref D7274
When using generative modifiers too many center dots were rendered in
the normal overlay. This patch only renders the normals of original
center dots.
Known issue: decoding the `norAndFlag` has issues on Intel GPU.
The loop normals were always drawn. We used to only draw the normals if
it was mapped to an original loop of the mesh. Due to recent changes we
can not find the correct loop and decide if we need to draw them.
Note still need to check the face dots normals. This is more complicated
as facedot normals needs to be encoded in a different way
This was caused by the removal of some `BONE_TRANSFORM_MIRROR` flag
handling in rBde530a95dc7b482dc22c933b9b8b2a98c79b5663. I simply
restored those lines that caused this issue.
This makes the code a bit simpler to follow, by replacing
`if (x) { all the code here }` with `if (!x) { continue; }` and un-indenting
the remaining code, and by returning early.
No functional changes.
The paint mask overlay showed the wires and edges of the final mesh.
This change will only draw wires and edges that are mapped to the
original mesh.
This change enables mapping data in regular Mesh extraction. This
can also be used for better drawing of the normal overlay.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7277
Selecting linked would only select a single arbitrary chain.
Now select linked follows all child-chains of the bone.
Also add support for following all links, similar to how this would work
if it were a mesh with connected edges instead of only child chains.
Leave this off by default to match pose mode.
This was crashing, when looking into a fix I noticed that it gave
hap-hazard results dissolving past forks in the parent/child hierarchy
arbitrarily following one chain.
This functionality is almost identical to "dissolve" which delimits
forks in the chain predictably.
So remove this in favor of dissolve (available from the delete menu).
This works for all selection modes,
include last below a separator since it's a specialized function.
Note that the previous commit was raising an exception as operator
properties don't support 'or'.
Edges were hard to see in some cases in edit-mesh vertex/face modes.
Since 804e90b42d alpha is handled differently,
update edge alpha to visually match 2.82.
Required for collisions with moving rigid bodies. Otherwise the static optimization mode will be kept and the obstacles would be calculated only once at the beginning.
The button seems to behave more as I'd expect without these
additional checks. Previously, the button was often grayed out when
it was actually working.
Reviewers: ISS
Differential Revision: https://developer.blender.org/D7252
The Screw Modifier had a lower limit for the steps value, which not only
was inconsistent between render and viewport steps, but also was capped
to 2 in UI and also in the code internally.
Removing the GHOST_kKeyUnknown check from processKeyEvent() produces
epeated unknown key events whenever a modifier key is held down, due
to the way ghost uses GHOST_kKeyUnknown as a filter value for modifier
key events.
Differential Revision: https://developer.blender.org/D7257
This commit introduces a new mode for calculating the positions and
weights of the IK segments in the Pose Brush based on the Face Sets.
The first segment of the chain will always include all face sets inside
the brush radius and it will propagate until the boundary of the last
face sets added in the flood fill. Then consecutive connected face sets
are added to the chain until the chain length limit is reached or all
face sets of the mesh are already part of the chain.
This feature enables complete control over the pose brush origins in
case that is needed. Also, with this mode, the user can have a library
of base meshes with face sets already configured to get to the initial
pose as fast as possible.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7235
This makes more clear what this automasking operation does and helps to differenciate it from the future face sets boundary automasking.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7185
Previously, all vertices inside the brush radius were taken into account
equally when calculating the sculpt normal and area. This was causing
artifacts and unpredictable results with large brushes or meshes with
curvatures, as the strongest deformation point of all brushes is usually
in the center. By weighting the vertex normal and position towards the
center when sampling, all brushes should now behave in a more
predictable way in non-uniform surfaces.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6989
Last time I checked Face Sets were preserved in a more or less
predictable way when modifying the mesh with dyntopo. As it looks that
in some problems this may cause bugs and you can't see or use face sets
when modifying the topology of the mesh whith dyntopo active, it is
probably better to reset them when going from dyntopo to mesh. This way
you know that you are always going to get a predictable face sets state.
Reviewed By: jbakker
Maniphest Tasks: T74637
Differential Revision: https://developer.blender.org/D7099
This is not dependent on having an armature as mentioned in T75111.
The collider simply has to be animated.
Reviewers: sebbas
Differential Revision: https://developer.blender.org/D7251
This commit aims to add functionality to the surface deform modifier that
gives more control and allows it to work better with the modifier stack.
* Maintains compatibility with older files. The default settings keep it
so that the whole object is bound and vertex coordinates get overwritten
as the modifier currently does.
* Turns the deformations from an absolute vertex coordinate overwrite into
an additive offset from the vertex location before the modifier to the
resulting bound deformation. This gives the ability to control the
strength of the deformation and mix the deformation of the modifier
with the modifier stack that comes before it.
* Also adds in a vertex group with the invert option. This is applied after
the bind deformation is added. So the whole object is still bound to target,
and the vertex group filters afterwards what parts get affected.
I experimented with a version to only binds the geometry weighted to the
vertex group, but that would break compatibility with old files.
I may bring it in later as a separate option/mode for the surface deform.
With several fixes from @mont29.
Reviewed By: mont29
Differencial Revision: https://developer.blender.org/D6894
Might have happened when Apply Base is used in sculpt mode.
In practice this probably was fine, since the operator tags object
for update, so the pointers will be restored back to what they should
be.
This commit gives the solidify modifier the ability to assign the newly created shell
and rim geometries to selected vertex groups. This expands the procedural control over
the modifier stack by letting users apply modifiers to the shell geometry without affecting
the original geometry.
This will be especially helpful for NPR users that use solidify to create backface
culling lines on their characters giving them the ability to add displace noise
and other effects.
Differential Revision: https://developer.blender.org/D6903
This commit adds the option to use armature bones for the From and To targets
when using armature objects.
The changes are based on the UV Warp modifier.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D6820
Problem is that the RenderEngines will change the RenderData cfra when
rendering (when time remapping is used -- at least workbench/eevee/
gpencil do a combination of BKE_scene_frame_get() plus
RE_GetCameraWindow() which alters the RenderData cfra).
Later on in the pipeline, the Compositor will use this RenderData cfra
to determine the output file name for the FileOutput node. (In contrast
to this, the 'regular' Output will use the Scene's RenderData -- not the
Render's -- cfra [which hasnt been altered])
It is not entirely clear why RE_GetCameraWindow was setting the cfra on
the Render, but it appears to be legacy OGL rendering related and is not
needed anymore.
Removing this will keep the cfra as needed for the Compositor FileOutput
node.
Caused by rBedb3b7a323a1.
Using evaluate_fcurve_only_curve actually causes quite a bit of slowdown
[6x] compared to bezier forward differencing [which was used prior to
rBedb3b7a323a1]. But full fcurve evaluation is desired with Dynamic
Interpolation Effects [Back/Elastic] since their min/max will not be
captured with forward differencing.
So now gain back speed [using bezier forward differencing] and only do
the full fcurve evaluation for dynamic interpolation effects.
Maniphest Tasks: T74927
Differential Revision: https://developer.blender.org/D7196
operator cancelled.
Lots of operators return OPERATOR_CANCELLED when no data really changed.
Reports from those operators do not show immediately in the Info Editor
[they only do if the operator returns OPERATOR_FINISHED].
Now also notify the Info Editor in case of OPERATOR_CANCELLED.
Maniphest Tasks: T58439
Differential Revision: https://developer.blender.org/D7238
- Use addon keyconfig for registered tools so reloading the keymap
doesn't clear them.
- Ensure there is a default keymap, needed for addon keymaps
to be available in the user keyconfig.
On some drivers, the default values is not respected correctly.
To workaround this we create a small VBO that contains only 1 vec4 worth of
data and just bind it using glBindVertexBuffer to ensure 0 stride.
This fixes T75069 Instances not rendered correctly by workbench.
This adds support for macOS aliases in addition to symlinks. It also adds
support for hidden, readonly and system file attributes.
Contributed by Ankit (ankitm) with modifications by me.
Differential Revision: https://developer.blender.org/D6679
Modify the view layer add operator (and underlying `BKE_view_layer_add`)
to allow for copying the current view layer, as well as adding a new one
but with all LayerCollections disabled by default (this is important for
heavy scenes where currently adding view layers can take a long time due
to enabling every collection by default).
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D6862
This works similarly to the CYCLES_OPENCL_TEST
environment variable to allow testing on unsupported
hardware.
Note: like the OPENCL test override, this is
for *testing* only and bug reports on unsupported
hardware will *not* be accepted at this point in
time.
This implements a new mode in the Face Sets Create operator to create a
new face sets from the faces selection in edit mode. This can be used
when the user considers that the edit mode tools are more convenient for
a more precise control or a certain type of selection, like creating a
face set from a face loop.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7211
This operator initializes all face sets in the sculpt at once using
different mesh properties. It can create face sets by mesh connectivity,
material slots, face normals, UV seams, creases, sharp edges, bevel
weights and face maps.
For properties that are already in the faces, this is implemented as a
loop. Properties that depend on edge attributes use a similar operation
to sculpt flood fill, but using face adjacency instead of edge vertex
connectivity.
As Multires also stores the face sets in the base mesh, this should work
in the face sets Multires implementation without any changes.
This is implemented as a separate operator as this resets the visibility
and creates all face sets at once, while the create face set operator
creates a single face sets, leaving the rest of the face sets in the
mesh as they are.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7209
This implements the Surface Smooth Brush as a mode inside the Smooth tool,
which uses the HC algorithm from "Improved Laplacian Smoothing of Noisy Surface Meshes".
Comparted to the regular smooth brush with laplacian smooth, this brush removes
the surface while preserving the volume of the object.
The smooth result can be controlled by tweaing the original shape preservation,
displacement and iteration count.
The same surface smooth operation is also available as a mesh filter.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7057
Using a float to store and render the mask seems like a waste of memory
without any noticeable difference in the viewport for its use case.
After this commit, the mask and the face sets combined should take the
same amount of GPU memory than only the mask in previous versions.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7148
This new method is only enabled if Overlay Smooth Wire is enabled.
This method gives really nice results but has some downside:
- Require a depth copy or loose the ability to write wire depth to the
depth buffer and have correct depth ordering of wires. This patch use the former, with its associated cost.
- Require some depth sampling and prevent early depth test (i.e: has
some performance impact).
- Has some relatively minor instability with geometry that are perpendicular
to the view and intersecting with other geometry.
Pros:
- Compared to a fullpass approach this is surely going to have less
performance impact and much higher quality.
- Removes the additional vertex offset. (see T74961)
- Fixes all half edges z-fighting.
{F8428014}
{F8428015}
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7233
SCULPT_FACE_SET_NONE default value is 0 and it is rendered hidden, so
the invert sign operation to show it was not working. Now the show all
function sets this face set to ID 1 before setting its sign.
I also refactored this check in gpu_buffers.
Not related to the reported issue, but the mesh in attached contains non
manifold geometry with hidden loose vertices, so the visibility state
was not syncing correctly to those vertices. Now the toggle operators
checks the current visibility only on the face sets, so no manifold
vertices are ignored (as they are in the rest of operations in sculpt
mode).
Reviewed By: jbakker
Maniphest Tasks: T74780
Differential Revision: https://developer.blender.org/D7188
This fixes multiple issues:
- Adds tag to update shading when changing vertex visibiliyt. This makes the mesh visibility update when the operator ends.
- Sync vertex to face sets no longer requires the pmap, so it does not crash. (Maybe we can initialize the pmap on undo to avoid these problems in the future).
- Sync vertex to face sets now works in a coherent way with the rest of visibility operations. Hide Box and Hide mask now sync the visibility changes to the face sets, so the all the operations are now getting a correct visibility state.
Reviewed By: brecht
Maniphest Tasks: T74761
Differential Revision: https://developer.blender.org/D7187
Brushes are created automatically when the tools is enabled, but this
way it gets correct defaults and it is accesible from scripts.
Reviewed By: jbakker
Maniphest Tasks: T74899
Differential Revision: https://developer.blender.org/D7199
The default face set color is white, so we can skip drawing the default
face set. This allows to enable again the optimization of not drawing
overlays in nodes where the mask is empty.
This will still slow down the viewport when a new face set is created
for the whole mesh or when inverting the mask, like in previous
versions.
I also renamed the function to make more clear that now it is checking
for both mask and face sets.
Reviewed By: brecht
Maniphest Tasks: T74692
Differential Revision: https://developer.blender.org/D7207
This checks that the distance of the current positions of two connected
vertices is not 0 before calculating the correction vectors for those
vertices.
Reviewed By: jbakker
Maniphest Tasks: T74808
Differential Revision: https://developer.blender.org/D7184
When using Face Sets to mask the mesh filter the pmap needs to be
initialized to check the face sets of each vertex, otherwise it will
crash because it is null.
Probably now we should just initalize the pmap when building the PBVH as
almost all tools need it, so we can avoid these crashes in the future.
Reviewed By: jbakker
Maniphest Tasks: T75089
Differential Revision: https://developer.blender.org/D7236
Show control edges stores the control edges in the mesh which is
picked up by the draw manager. When applyng a subsurf (or multires) we
don't want that data present in the base mesh. Any rebuilding of the mesh
would overwrite the data anyway.
This patch introduces a new flag for applying modifiers
that can be checked to ignore storing display specific data in
the base mesh.
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D7163
The normals of loose edges can be non uniform as they aren't normalized.
Checked with what happens with edit loose edges and synchronized the
implementation.
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D7127
Weight paint overlay was not working when XRay was turned on.
The Weight Paint overlay is rendered directly into the default
framebuffer with a depth equal test. This test fails as the depth won't match.
This patch will update the depth buffer in these cases.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D7176
Events for keys specific to certain keyboard layouts unknown to Blender
were ignored. Now pass them along as unknown key events for which we
can still handle text input, like we already do for Linux and macOS.
Differential Revision: https://developer.blender.org/D7229
Random Walk subsurface scattering did look different with OptiX because transmittance is
calculated based on the hit distance, but the OptiX implementation of `scene_intersect_local`
would return the distance in world space, while the Cycles BVH version returns it in object
space. This fixes the problem by simply skipping the object->world transforms in all the
places using the result of `scene_intersect_local` with OptiX.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7232
Happens on macOS 10.15.4 and Xcode 11.4.
The reason of failure is caused by following factors:
- xcodebuild reports full semantic macOS SDK version 10.15.4
- The actual SDK file path will only include major and minor part
of the version (10.15, MacOSX10.15.sdk)
- Previous CMake code of ours expected direct match between SDK
version and file path.
The solution is to make our detection code a bit more flexible and
additionally check for major.minor macOS SDK version in the path.
The specific goal of this change is to get rid of separate code paths
for older and newer Xcode versions.
The version 8.2 is picked since it's the latest version which runs on
macOS 10.11 (which is our current deployment target). If that turns
out too new for some reason the alternative would be to require Xcode
version 5.
The selection in Draw mode works as a quick eraser and must erase only the points selected in that operation and not any previous selected point.
Now, before erase, unselect any previous selected point.
Note: It's planned to split select & erase operators for Draw mode.
Disable functionality reported in T60766 & only partially worked.
This could be used if the key-map was added after Blender started
as a way to customize modal key-maps, however it didn't work with
the add-on enabled on startup.
Add-on key-maps are intended to extend existing key-maps
so they can call the add-on, not as a way to change modal key-maps
for Blender's built-in functionality.
Disable this since it's not needed as add-ons
can't yet define modal key-maps.
The main CMakeLists already requires CMake 3.5, so there is no point of
requiring "newer" CMake on macOS.
This was a code from a while back where CMake 3 was not required on all
platforms.
This issue became visible after fixing other TAA issues recently.
The sample count of the first frame wasn't reset resulting that the
incorrect resolve took place. This issue was already there beforehand,
it is just much clearer during the recent changes.
Now the `taa_sample will be reset when performing an animation playback
in the 3d viewport.
This simplifies freestyle render pipeline integration so we don't have to do
much manual ID user management at all. The complexity here was legacy from
Blender Internal.
Based on fix provided by Sybren A. Stüvl.
This makes it work again at least for the non-UDIM case. For UDIM it's not
great still but I'll consider that a known limitation. A proper solution is
probably to find the closest tile at the start of the stroke and then only
paint in that one tile for the rest of the stroke.
There is no need to have another font embedded in the Blender executable, we
can assume the bundled font exists. In the future we may provide a fallback
if the font specified by the user in the preferences is missing a character,
but that can use our bundled international font.
Differential Revision: https://developer.blender.org/D6854
This means Blender can display more text correctly without having to enable
user interface translation. Previously the quality of the font was lower,
but that has been fixed now.
The font files have now been ungzipped, which results in faster file loading
as Freetype can read only the parts of the file that it needs. Blender download
size should not increase since the release package is compressed.
This includes improvements for Cyrillic characters from the latest DejaVu
Sans fonts from D6960, contributed by Harley Acheson. Fixes T74097.
Differential Revision: https://developer.blender.org/D6854
The numbers here can probably be tweaked to be better, but it's hard to
predict and this should at least avoid excessive memory swapping.
Fixes T57064.
The current viewer pose position as determined by the OpenXR runtime
would be applied as offset. This offset should however only be set when
toggling the positional tracking while the session already runs.
This patch adds support for alpha hash for hair rendering in EEvee. Here's a comparison of with alpha hashing:
{F7588610}
And no alpha hashing:
{F7588615}
Note that this needs "soft shadows" enabled, otherwise shadows will be noisy; here's a render with soft shadows disabled:
{F7588621}
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D5221
Caused by 18b693bdbd, due to lack of thread safety.
Beteween calling BKE_sequencer_cache_get_num_items and BKE_sequencer_cache_iterate
New items could be inserted in the cache.
BKE_sequencer_cache_iterate() now use 2 callbcack functions for initial setup
during which buffers with correct length can be initialized and finally iterating.
Additionally drawing of unselected items was fixed again introduced in 18b693bdbd.
T74662 is reporting quite different symptoms, than I get on my machine, so I am not
entirely sure this is complete fix.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7220
Fix T74038, the logic didn't handle the case where there was not any button with focus.
Reviewed By: Julian Eisel
Maniphest Tasks: T74038
Differential Revision: https://developer.blender.org/D7208
Tested with AMD Radeon Pro WX 9100, where it brings performance back to 2.80
level, and combined with recent changes is about 2-15% faster than 2.80 in
our benchmark scenes.
This somehow appears to specifically address the issue where adding more shader
nodes leads to slower runtime. I found no additional speedup by applying this
to change to 2.80 or removing the new shader node code.
Ref T71479
Patch by Jeroen Bakker.
Differential Revision: https://developer.blender.org/D6252
This commit adds the option to invert the resulting weights of the
falloff curve.
There is a workflow used by some to convert a texture mask into
vertex weights by using a custom curve and inverting the points.
This allows the same effect with a single click, and gives the modifier
more procedural functionality.
With minor UI tweaks by @mont29.
Differential Revision: https://developer.blender.org/D6899
We appear to be hitting some limit where adding any amount of code causes a
significant performance regression, no matter what it does. To work around
that a new node level was added.
Ref T71479
```
...\gpu_texture.c(466,7): warning C4555: result of expression not used
...\gpu_texture.c(559,7): warning C4555: result of expression not used
...\gpu_texture.c:1205:72: warning: pointer targets in passing argument 4 of ‘glGetTexLevelParameteriv’ differ in signedness [-Wpointer-sign]
```
When use the dopesheet add layer operator a new blank frame is created. It's very strange to create a layer and don't see anything in dopesheet.
If the layer is added in properties, the frame is not created.
Reviewed by: @pepeland @mendio
This commit adds a `mipmaps` member to the `GPUTexture` struct and also
computes to the memory used by these mipmaps and the memory used for
textures that are created from an external bindcode.
So it solves the following inconsistencies:
- The memory value for mipmaps was not being computed.
- As `GPU_texture_from_bindcode` didn't call
`gpu_texture_memory_footprint_add`, it brought inconsistencies to the
value of the used memory, especially when the texture is freed.
Differential Revision: https://developer.blender.org/D3554
When the TAA is finished the screen can still be redrawn by other
operations without the TAA resets.
If that happened the TAA did add a blank sample to the result as the
scene wasn't drawn, but the was processed.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7226
This introduces a new id data block with type `ID_SIM`.
The RNA part of this change is disabled by default for now.
The corresponding cmake option is `WITH_SIMULATION_DATA_BLOCK_RNA`.
The new data block does not yet have an embedded node tree.
I want to add that separately.
This is part of T73324.
The set of files I changed is based on rBb0a1cf2c9ae696.
However, I had to change fewer files, because I did not add a new object type.
Differential Revision: https://developer.blender.org/D7225
The theme color is used in code, but not exposed in RNA and therefore
there's no button in the theme editor for it.
Reviewed by: Julian Eisel
Differential Revision: https://developer.blender.org/D7219
Give pointcaches a proper path function which e.g. also resolves
ALT+click (assign to all selected) not working for anything relating to
pointcaches.
This also cleans up the usage of the 'eModifierTypeFlag_UsesPointCache'
flag (removed from the boolean modifier, added to the softbody modifier).
Maniphest Tasks: T64573
Differential Revision: https://developer.blender.org/D7115
the settings
Caused by rBc476c36e4008.
This hooks into the existing FIXME (workaround for a missing update
tagging), reactivates the NS_VIEW3D_GPU notifier (introduced in
rB2ad3d8f158d2 -- but not going anywhere atm.) to check changes to rv3d
rflag which indicated UserStudioLight has changed. To not have updates
all the time, the rflag also needs to be cleared again (see original
rB2ad3d8f158d2).
Maniphest Tasks: T74744
Differential Revision: https://developer.blender.org/D7194
Caused by rBc476c36e4008.
This hooks into the existing FIXME (workaround for a missing update
tagging), needs to also check the clip_state (to detect
changes in DRW_STATE_CLIP_PLANES).
Maniphest Tasks: T74872
Differential Revision: https://developer.blender.org/D7193
Caused by rBc476c36e4008.
This hooks into the existing FIXME (workaround for a missing update
tagging from operators), needs to also check the shading.flag (to detect
changes in V3D_SHADING_MATCAP_FLIP_X).
Differential Revision: https://developer.blender.org/D7192
Caused by rB9516921c05bd.
Dont really see a reason to draw overlays here if overlays are disabled.
Looks like this only affects Face/Vertex mask selection drawing [which
should indeed be hidden when overlays are disabled] next to two
exceptions:
- OVERLAY_paint_vertex_cache_populate draws weights as well [D7176 /
T70807 might be related here, but to me it looks like drawing weights
here is actually not needed at all]
- OVERLAY_paint_texture_cache_populate calls
DRW_cache_mesh_surface_texpaint_get [not sure about this one, this is
also called from workbench_cache_texpaint_populate, looks like this is
not needed when overlays are hidden]
Maniphest Tasks: T74096
Differential Revision: https://developer.blender.org/D7179
The removal of duplicate faces that are created during the handling of
degenerate cases was implemented already but didn't work.
This patch should fix some crashes with the solidify complex mode
related to that.
See D7221 for details.
This has some advantages over operator search:
- Some operators need options set to be usefully accessed.
- Shows key bindings to access menus
(for actions that don't have key bindings themselves).
- Non operator actions such as check-boxes are also shown.
- Menu items can control execution context, using invoke or execute
where appropriate so we can control how the operator runs.
Part of the design task T74157.
This can be tested using the 'Experimental' preferences section
or selected in the key-map editor.
More detailed symptoms: there was no curve cache created for an object
which was used by draw manager.
A bit tricky situation, which involves collection instances and their
proxies.
The root of the problem in the dependency graph was that instanced
collections visibility was not updated when object is requested with
different visibility. So what was happening is that one of the objects
was pulled as an indirect dependency of something invisible, so it
built instanced collections as if the instancer is invisible. After
that the same object was built as visible. Before this fix this was
only update object flags, the instanced collections still believed they
are invisible. Since there is no path via relations which would connect
visible object with instanced objects the visibility flush which is
happening during graph finalization did not "fix" the visibility flags.
This change makes it so instanced collections are updating their
visibility when their instancer's visibility is changing to truth.
This is similar to how collections will accumulate their visibility
when same collection is used from multiple ones with different
visibility.
However, this alone wasn't enough to get crash fixed. This marked
collections as visible, but the geometry component of the curve object
was still considering self as invisible.
This is something tricky, since the code which is responsible for this
issue was added as an optimization in afb4da6650. This looks like like
an oversight in that commit since it's rather weird that ID node's
flag would depend on construction order (in "normal" object builder the
ID node's directly_visible flag is initialized to object's visibility).
So it seems logical to get this part of code in sync between "regular"
and "accumulative" object builder.
And last but not least the naming is_directly_visible is old and does
not really represent what it actually mans now: a more correct name
would be "will be used by the draw manager".
Differential Revision: https://developer.blender.org/D7217
When the TAA is finished the screen can still be redrawn by other
operations without the TAA needs to be reset.
If that happened the TAA did add a blank sample to the result.
This patch will add an early exit in the case TAA was finished. Note
that there are still some cases still not working. The overlay engine
can in certain circumstances draw directly into the default_fb what can
lead to render artifacts.
This patch adds ability to set up colors and size of background
(transparency) checkerboard pattern in viewport and 2d editors. No new
backgrounds, only changing colors in existing ones.
This is not the background of the viewport, it is a transparency
checkerboard that is turned on only in render mode, when the
transparency mode is on. And also in 2D-editors, (image, sequencer,
etc).
Reviewed By: Pablo Vazquez, Julian Eisel
Differential Revision: https://developer.blender.org/D6791
this patch will change the behaviour of the material offset in complex mode to fit simple mode output.
Previously in complex mode this would offset the material of the enire shell,
because when you read the tooltip it says material for new generated geometry.
In complex mode everything is new generated geometry though.
In simple mode on the other hand, this would give you a way to only change the inside faces
material. There may be cases in large modifier stacks where material offset like it is implemented
currently in complex mode may be useful, but it is much more useful in the way it is implemented
by simple mode.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D7215
The `build_driver_relations()` function in the depsgraph relations builder
adds relations between drivers that potentially write to the same memory
location. This of course is only useful when there are two or more drivers.
For In Front Objects we need to use the in front depth buffer.
This patch will use the in front depth buffer and also makes sure that
it is filled with the center pixel depth.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D7216
When using the image editor the display channels attribute can become
invalid when selecting another image/buffer. This patch will check what
display channels are valid and when an invalid channel is selected it
will fall back to the color channel.
To de-duplicate the code it also introduces a
`ED_space_image_get_display_channel_mask` function that will determine
the valid bitflags for the display channel of a given `ImBuf`.
Started to happen after recent fix for T72632.
Was caused by runtime fields backup doing an early exit in the case the
given ID was never expanded by the Copy-on-Write mechanism, but it was
not done int the backup restore function (since it was not possible to
know "locally").
Now both init() and restore() will do an early exit when the ID had
nothing to be backed up.
On some platforms the stereo viewport rendering was not working. The
issue was that the fragment shader and vertex shaded didn't match. Some
platforms will remove the non-matching in/out parameters and blender
needs to provide only the optimal set of parameters. Other platform
still want to receive data for the parameters that aren't used.
This fix uses the correct vertex shader that matches the fragment shader
making both platforms render the same result.
Fixes an issue with secondary particles being out of sync with the main simulation. Cleaned up the secondary particle code in general too (making sure that all solver attributes - timestep, framelength, etc. - are set correctly).
Actually, the fade objects always fade to Black color, but this is not a good solution.
This patch fade the object to the viewport color.
Differential Revision: https://developer.blender.org/D7206
Back in 2.79 you could either use the debug panel or an
environment variable to override using OpenCL for unsupported
hardware. Which was rather useful for developers when testing
on NVidia just to be sure the CL kernels at-least build properly.
This broke in rB949ab753bb2
This diff restores testing though the CYCLES_OPENCL_TEST
environment variable.
Differential Revision: https://developer.blender.org/D7202
Reviewers: brecht
Add new option to change the stroke hardeness. This option works at stroke level, not at point level.
Also replaced the "Both" name mode by "Stroke and Fill".
Differential Revision: https://developer.blender.org/D7195
Parenting in the outliner via drang and drop would always happen without
the 'Keep Transforms' option. Since this is often desired, this adds the
ability to hold Alt for doing this to the drop action.
Adding the hint to hold Alt to the operator name is not nice, but since
the operator name is used for the UI, there doesnt seem to be a nicer
way of doing this.
If modifier keys are needed back for other actions, spawning a menu
instead could be an alternative for the future.
Maniphest Tasks: T74649
Differential Revision: https://developer.blender.org/D7120
It is not guaranteed that with Multires modifier existing there
will be CD_MDISPS and CD_GRID_PAINT_MASK custom data layers.
Fixes assert in the following scenario:
- With default cube, go to edit mode
- Add Multires modifier
- Remove the Multires modifier
The Lens metadata stamped on rendered images was wrong when the camera lens
is animated. This was caused by the render pipeline passing the original
camera to the metadata system, and not the evaluated camera.
When using grease pencil in a stereo rendering the grease pencil objects are
only visible in the left eye. In the viewport it renders both.
Issue is related that `DRW_render_gpencil` only renders a single view. But
`DRW_render_to_image` renders all views. This patch puts this in a loop to
render both eyes.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D7154
When in editmode faces can be hidden, but in object mode these faces are
still visible. The flag if a face was hidden in edit mode is stored in
object mode, but should not be used.
The edge detection gpu batch did detect hidden faces and didn't add them
to the draw batch. The edge detection gpu batch is used for workbench
shadows, custom bone shapes and object outlines.
This patch adds all faces to the edge detection batch.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D7157
Mpving utils from idcode to idtype proved to be somewhat painful for
some reasons, but now all looks good.
Had to add a fake/empty shell for the special snowflake too,
`ID_LINK_PLACEHOLDER/INDEX_ID_NULL`...
When RGB images or BW images are converted to a GPU texture and color
space conversion was needed the images were read incorrectly.
This patch checks the correct amount of channels in the image and uses
that as the correct pixel stride.
Is done by considering all base edges infinitely sharp.
In the future can become a different operator option to allow to mix
Catmull-Clark and simple subdivisions. For now just sticking to what
old good Blender versions were doing.
Fixes T74869: Simple subdivision type is not working as it should
The idea is following: only store information about edges which are
1. Communicated to the OpenSubdiv topology.
This rules out all loose edges, as they are not needed for the
propagation process.
2. Correspond to edge from the base mesh.
This avoids storing edges which are generated between inner face.
Those are not to have any sharpness to allow smooth propagation.
There is still possible to have memory peak in some obscure case when
mesh contains a lot of loose edges. It can be optimized further by
utilizing knowledge of the non-loose tags.
The title says it all actually. The test case is to get default cube,
set some edges to non-zero crease, add multires modifier and hit the
"Subdivide" button few times.
The memory footprint might be optimized by not storing information
about inner generated edges.
Both scaling the text itself, as well as scaling the curve wasnt
updating, now added relations for this.
Maniphest Tasks: T74701
Differential Revision: https://developer.blender.org/D7140
Makes it so conversion is centralized in a single place.
We might consider removing any conversion, passing value as-is which
will be easier for I/O scripts to match crease. The downside of that
would be loose of control range in certain qualities and values of
crease.
There shouldn't be any functional changes in this commit.
Stereoscopic viewport didn't support Color Manangement due recent
changes in the color management pipeline. In order to solve the issue we
will migrate the strereo rendering into the GPUViewport. This will share
some textures and reduce required GPU memory.
Reviewed By: fclem, dfelinto
Differential Revision: https://developer.blender.org/D6922
Stereo offscreen rendering has been replaced with stereo viewport
rendering. When an offscreen buffer is used it is only used for mono
rendering.
This patch will remove the second offscreen buffer.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D7153
This patch moves the NULL check of `actseq` to the correct position, which should happen
before the `channel` is assigned. Otherwise an attempt to call the `sequencer_select_grouped_exec`,
when there is no active sequence and `use_active_channel` set to true, results in a crash.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D7170
This patch include changes:
- Thicker and clearer selection indication
- Slimmer handles
- More transparent muted strips
- Trim frame number is drawn inside the strip
- Strip text is drawn in upper part of strip
- Color strips now have specific color, with chosen color drawn under strip text
- Transition strip will use color of input strips showing direction of transition
- Selecting effect strip will highlight input strips
- Selecting multicam strips will highlight target channel
- Missing media state is now indicated by a red line drawn on the top part of the strip
- A checkerboard pattern is now drawn on the outsides of the meta range
- Hold still regions are now always drawn if existent, with a darker shade of the strip’s background color
Author: Alessio Monti di Sopra <a.monti>
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D6883
This patch implements dumping images from cache to HDD.
The main goal of this system is to provide a means to achieve consistent playback speed mainly for strips that are not possible to preview in real time.
How to use:
Disk cache has own settings in user preferences for path to storage, size limit and compression level.
To use disk cache, you need to check `Use Disk Cache` box, set `Disk Cache Directory`, `Disk Cache Limit` and save or open existing .blend file.
By default sequencer output will be cached only. Manual setting is possible in cache panel.
Uses:
- Replacement or alternative for proxies. Disk cache will work with any strip type, supports float images as well.
- Storage for strip thumbnails.
- Less RAM needs to be allocated for preview cache
How it works:
Disk cache is extension of RAM cache. Every image, that is stored or deleted in RAM will be stored or deleted on HDD as well. Images can be compressed to save space and for use on slower drives. Compressed images are slower to write and read though.
Images are stored in bulk of 100 rendered frames per one file. This is to overcome slow file access time for large amount of files. Drawback is, that if one frame needs to be redrawn, all 100 frames are deleted.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D5524
'mirror_gpf_marker()' needs a NULL bGPDframe for initialization [but
still requires a scene to get the marker].
Maniphest Tasks: T74837
Differential Revision: https://developer.blender.org/D7166
To prepare for D6811 small changes were needed.
we can no longer undefine near/far since the windows
headers use those extensively.
some of the imbuf files need to include the windows
headers explicitly to make sure it builds.
Unlike Linux where fseek/tell will be either 32 or 64 bit
depending on the target platform, it will always be 32 bit
on windows.
We had some macro magic in BLI_winstuff.h that substituted
them for 64 bit versions, but that is upsetting the system
headers if they get included after BLI_winstuff.h which
is problematic for D6811.
This diff adds proper functions in blenlib and updates
all calls that were using the BLI_winstuff.h header to
gain 64 bit file IO.
note: Anything that was using the 32 bit versions (ie not
including BLI_winstuff.h) will still be using the 32 bit
versions, which is perhaps a good code quality Friday project.
Differential Revision: https://developer.blender.org/D7160
Reviewers: brecht dfelinto
Both the MS headers and blender headers define the HKEY
which gives all kind of inclusion order issues.
This diff renames all *KEY constants to EVT_*KEY to resolve
this conflict.
Reviewed By: brecht , dfelinto
Differential Revision: http://developer.blender.org/D7164
* Space: volume density and step size in object or world space
* Step Size: override automatic step size
* Clipping: values below this are ignored for tighter volume bounds
The last two are Cycles only currently.
Ref T73201
By default it will now set the step size to the voxel size for smoke and
volume objects, and 1/10th the bounding box for procedural volume shaders.
New settings are:
* Scene render/preview step rate: to globally adjust detail and performance
* Material step rate: multiplied with auto detected per-object step size
* World step size: distance to steo for world shader
Differential Revision: https://developer.blender.org/D1777
Voxels are loaded directly from the OpenVDB grid. Rendering still only supports
dense grid, so memory usage is not great for sparse volumes, this is to be
addressed in the future.
Ref T73201
Only the volume drawing part is really finished and exposed to the user. Hair
plugs into the existing hair rendering code and is fairly straightforward. The
pointcloud drawing is a hack using overlays rather than Eevee and workbench.
The most tricky part for volume rendering is the case where each volume grid
has a different transform, which requires an additional matrix in the shader
and non-trivial logic in Eevee volume drawing. In the common case were all the
transforms match we don't use the additional per-grid matrix in the shader.
Ref T73201, T68981
Differential Revision: https://developer.blender.org/D6955
This check box alters how weights are displayed and painted,
similar to Multi Paint, but in a different way. Specifically,
weights are presented as if all locked vertex groups were
deleted, and the remaining deform groups normalized.
The new feature is intended for use when balancing weights within
a group of bones while all others are locked. Enabling the option
presents weight as if the locked bones didn't exist, and their
weight was proportionally redistributed to the editable bones.
Conversely, the Multi-Paint feature allows balancing a group of
bones as a whole against all unselected bones, while ignoring
weight distribution within the selected group.
This mode also allows temporarily viewing non-normalized weights
as if they were normalized, without actually changing the values.
Differential Revision: https://developer.blender.org/D3837
NOTE: While most of the milestone 1 goals are there, a few smaller features and
improvements are still to be done.
Big picture of this milestone: Initial, OpenXR-based virtual reality support
for users and foundation for advanced use cases.
Maniphest Task: https://developer.blender.org/T71347
The tasks contains more information about this milestone.
To be clear: This is not a feature rich VR implementation, it's focused on the
initial scene inspection use case. We intentionally focused on that, further
features like controller support are part of the next milestone.
- How to use?
Instructions on how to use this are here:
https://wiki.blender.org/wiki/User:Severin/GSoC-2019/How_to_Test
These will be updated and moved to a more official place (likely the manual) soon.
Currently Windows Mixed Reality and Oculus devices are usable. Valve/HTC
headsets don't support the OpenXR standard yet and hence, do not work with this
implementation.
---------------
This is the C-side implementation of the features added for initial VR
support as per milestone 1. A "VR Scene Inspection" Add-on will be
committed separately, to expose the VR functionality in the UI. It also
adds some further features for milestone 1, namely a landmarking system
(stored view locations in the VR space)
Main additions/features:
* Support for rendering viewports to an HMD, with good performance.
* Option to sync the VR view perspective with a fully interactive,
regular 3D View (VR-Mirror).
* Option to disable positional tracking. Keeps the current position (calculated
based on the VR eye center pose) when enabled while a VR session is running.
* Some regular viewport settings for the VR view
* RNA/Python-API to query and set VR session state information.
* WM-XR: Layer tying Ghost-XR to the Blender specific APIs/data
* wmSurface API: drawable, non-window container (manages Ghost-OpenGL and GPU
context)
* DNA/RNA for management of VR session settings
* `--debug-xr` and `--debug-xr-time` commandline options
* Utility batch & config file for using the Oculus runtime on Windows.
* Most VR data is runtime only. The exception is user settings which are saved
to files (`XrSessionSettings`).
* VR support can be disabled through the `WITH_XR_OPENXR` compiler flag.
For architecture and code documentation, see
https://wiki.blender.org/wiki/Source/Interface/XR.
---------------
A few thank you's:
* A huge shoutout to Ray Molenkamp for his help during the project - it would
have not been that successful without him!
* Sebastian Koenig and Simeon Conzendorf for testing and feedback!
* The reviewers, especially Brecht Van Lommel!
* Dalai Felinto for pushing and managing me to get this done ;)
* The OpenXR working group for providing an open standard. I think we're the
first bigger application to adopt OpenXR. Congratulations to them and
ourselves :)
This project started as a Google Summer of Code 2019 project - "Core Support of
Virtual Reality Headsets through OpenXR" (see
https://wiki.blender.org/wiki/User:Severin/GSoC-2019/).
Some further information, including ideas for further improvements can be found
in the final GSoC report:
https://wiki.blender.org/wiki/User:Severin/GSoC-2019/Final_Report
Differential Revisions: D6193, D7098
Reviewed by: Brecht Van Lommel, Jeroen Bakker
Extends Ghost to include an abstraction for OpenXR, which I refer to as
Ghost-XR. Such an API is the base for the following commit, which introduces VR
support to Blender.
Main features:
* Simple and high-level interface for Blender specific code to call.
* Extensible for muliple graphics backends, currently OpenGL and a DirectX
compatibility layer are supported.
* Carefully designed error handling strategy allowing Blender to handle errors
gracefully and with useful error messages.
* OpenXR extension and API-layer management.
* OpenXR session management.
* Basic OpenXR event management.
* Debug utilities for Ghost-XR and OpenXR
For more information on this API, check
https://wiki.blender.org/wiki/Source/Interface/XR.
Reviewed by: Brecht Van Lommel
Differential Revision: https://developer.blender.org/D6188
RE_engine_register_pass is sometimes in the headers with type
as an integer parameter, sometimes as eNodeSocketDatatype.
This caused warnings, the root cause was makesrna was not able
to generate the proper type for enums and defaulted to int.
makesrna has been extended with the RNA_def_property_enum_native_type
that allows telling makesrna the native type of an enum, if set it
will be used otherwise it will still fall back to int.
Differential Revision: https://developer.blender.org/D7117
Reviewed By: brecht
The initial code from earlier from today didn't really work reliable
since it is not possible to apply virtual modifiers but not the real
multires one (in a situation like mesh with shapekeys and multires).
New code uses less memory and has better performance for the case
when there are actual modifiers leading the multires. The case when
there is only multires will not be as performant as possible at this
moment.
The parenting was using the old logic, but with new engine the draw is done using eval data.
Fixed the depsgraph relationship missing with bones to get an update when the bone is transformed.
Also fixed Snap cursor to Selected
BKE_ocean.h uses the bool type without including stdbool.h
counting on someone else including that before it.
With D6811 enabling automatic sorting of the includes
this can no longer be counted on. This changes includes
stdbool.h in BKE_ocean.h so it can build without being
depended on others including the right headers before it.
Fix crash when the operator search is used while no active object exists. The cause of the issue is an attempt to dereference `ob` when it is `NULL`. Therefore this patch checks the return value of `SCULPT_mode_poll()` first, to ensure that `ob` isn't `NULL`.
Reviewed By: pablodp606
Maniphest Tasks: T74838
Differential Revision: https://developer.blender.org/D7156
The code would have break the first (deform only) modifiers
once the index is reached, but it will not prevent second
loop (over remaining modifiers) from run.
This was applying deform modifier twice in some conditions:
having single deform modifier and calculating deformed mesh
up to the first modifier (index=0).
Use full argument name.
Also order arguments in the generosity order: from depsgraph
(which has everything) to object (which contains multires)
specific multires modifier.
The feature is hidden behind an experimental option, you'll have to
enable it in the preferences to try it.
This feature is not yet considered fully stable, crashes may happen, as
well as .blend file corruptions (very unlikely, but still possible).
In a nutshell, the ideas behind this code are to:
* Detect unchanged IDs across an undo step.
* Reuse as much as possible existing IDs memory, even when its content
did change.
* Re-use existing depsgraphs instead of building new ones from scratch.
* Store accumulated recalc flags, to avoid needless re-compute of things
that did not change, when the ID itself is detected as modified.
See T60695 and D6580 for more technical details.
Unreported Crash. When hidden faces are active (retopology) the depth
test could fail as the default framebuffers aren't set. This patch will
check if we are rendering a depth only and skip the clearing of the
buffer.
With this change baking jobs will be aborted faster. The user will not have to wait for the current frame to finish baking. The bake job will exit early and discard the incomplete frame.
This option existed already and was just hidden in the UI. With the new fluids system though, it will only be used for rendering - and not to optimize the cache.
Extract will steal all depsgraphs currently stored in given bmain, and
restore will put them back in place, using scene and viewlayers as keys.
Preliminary work for undo-speedup.
Part of T60695/D6580.
Mask extract modifies the topology when adding the boundary loop, so
previous face sets may not be correct in the new mesh. Remove the face
sets datalayer and let sculpt mode rebuild it when entering sculpt mode
in the new object.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7129
The previous behaivour didn't make sense as sculpt mode was still active
when switching to the new object, so it was rendering inconrrectly.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7130
The face set color variable needs to be declared inside of the loop in
order to reset it per iteration.
Reviewed By: jbakker
Maniphest Tasks: T74626
Differential Revision: https://developer.blender.org/D7096
Small UX fix. When hidding everything but the active face set with H,
the last stroke lotation center can be in a part of the model that is
hidden, so viewport navigation becomes confusing until you start a new
stroke on the visible face set. Now the viewport navigation rotation
center is updated to the active vertex when using a visibility operation
that uses it, so it always rotates using the visible face set as the
origin.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7137
`ANIM_animdata_update()` did not sort grease pencil frames. A
pre-existing comment stated this wouldn't be necessary as
`posttrans_gpd_clean()` already does this. However, this is only
applicable when the change is performed via the transform system. The
mirror operator doesn't call `posttrans_gpd_clean()`, invalidating the
assumption in the comment.
I moved the sorting code into `BKE_gpencil_layer_frames_sort()`, which
is now called from both `ANIM_animdata_update()` and
`posttrans_gpd_clean()`.
This commit adds 7 themes submitted by the community on Devtalk. These themes both serve specific purposes, provide a greater variety in look & feel, and serve as welcoming homes for users coming on board from other packages. This is the initial commit, but these themes can be continuously updated over time to fix issues and keep them up to date with changes.
Thanks to all contributors, and in particular the makes of the picked themes: Pierre Schiller, Edward Agwi, Vojtěch Lacina, Michail Soluyanov, Jason van Gumster, Mr Wax Police & Jonathan Lampel.
An overview is here: https://developer.blender.org/T74360
This patch fixes various problems of alignment and element backdrops for
the animation channels drawing, mainly in the Graph editor but also for
grease pencil and mask layers in the Dope Sheet.
Reviewed By: billreynish, sybren
Differential Revision: https://developer.blender.org/D5204
This fix jitter of overlay and GPencil. But I'm not sure this should
be the responsibility of the subsequent draw engines or the responsibility
of the current engine to reset the view.
Test specs are read from strings, and there was a comma instead
of a decimal point, and then an extra decimal point in the Quad0 test.
This test has been flaky on Windows buildbot. Perhaps this is why.
- Remove Shift for drawing poly-lines, just as in the default keymap
- Use consistent hotkeys for size and strength radial controls
- Fix some bugs/missing items from the GP merge
selections
Previously this was only supported in single click selections, doing an
island selection with box/circle/lasso would just select individual
vertices instead. Now selects islands properly.
This also unifys some logic between box/circle/lasso:
- use early selection test from lasso [makes things faster] in box/
circle
- circle wasnt checking visible face
- Add icons for Sculpt Cloth, Clay Thumb and Draw Face Sets, as well as GP Tint, Replace and Transform Fill tools
- Tweak icons for Sculpt Rotate, Pinch, Multiplane Scrape, Inflate, Blob, Draw Sharp, based on feedback on Devtalk
Fixed memory leak that showed up after the original issue (crash) had been fixed in 93ac4709eb. The fix ensures that light cache bakes free up GPU smoke textures and the smoke domain list correctly.
This commit also removes the workaround (f3a33a9298) that disabled light cache bakes for fluid objects.
The `check_is_animated()` function will be used by the upcoming Alembic
exporter as well. There is nothing USD-specific in the function.
No functional changes.
Owner of filelisting job was changed, without proper update of all
access/usages of that owner to reach the job, leading to failure of
timer removal from the WM, and attempt to double-free the job...
Caused by rB2c4dfbb00246ff.
The issue was that we were creating temporary mesh copies and storing
them in bmain and then later using BKE_mesh_nomain_to_mesh which would
add them to bmain once more (duplicates).
This would lead to crashes later as the custom data of the mesh could be
trashed quite easily.
Was happening when object does not have CD_MDISPS allocated yet.
Need to make sure totdisp and level is specified on CD_MDISPS data
prior to loading (as the load expects them to be properly set).
Part of the fix was to get gputexture to use an array to accomodate each
eye. This takes care of viewports showing individual Left or Right
views.
For the combined view the fix was in overlay_image.c:camera_background_images_stereo_setup.
Note 1: Referece images are still not supporting stereo.
Note 2: For painting, and getting image bindcode I'm hardcording a
single-view experience.
Note 3: Without D6922 stereo is too broken to even test this patch.
With D6922 + this patch the fullscreen modes work (anaglyph/interlace
not yet).
Differential Revision: D7143
This change fixes artifacts produced by these operations.
On a technical aspect this is done by porting all of the operations
to the new subdivision surface implementation which ensures that
tangent space used to evaluate modifier and those operations is
exactly the same (before modifier will use new code and the operations
will still use an old one).
The next step is to get sculpting on a non-top level to work, and
that actually requires fixes in the undo system.
Makes it work better "out of the box" for irregular topology like
Suzanne mesh.
There might be some performance impact on non-regular meshes, but
those are not very common usecase for multires and for those its
always possible to lower the quality if needed.
Loose vertices and vertices of loose edges callback was not working
correct if some of other callbacks were set to NULL.
Was caused by missing bitmask set in the callbacks which were set
to NULL.
Allow to mark individual vertices as infinitely sharp even if there is
no full topology and no access to edges: infinite sharp vertices do not
need connectivity information.
This allows fast access to various arrays in the Python API.
Most notably, `image.pixels` can be accessed much more efficiently now.
**Benchmark**
Below are the results of a benchmark that compares different ways to
set/get all pixel values. I do the tests on 2048x2048 rgba images.
The benchmark tests the following dimensions:
- Byte vs. float per color channel
- Python list vs. numpy array containing floats
- `foreach_set` (new) vs. `image.pixels = ...` (old)
```
Pixel amount: 2048 * 2048 = 4.194.304
Byte buffer size: 16.8 mb
Float buffer size: 67.1 mb
Set pixel colors:
byte - new - list: 271 ms
byte - new - buffer: 29 ms
byte - old - list: 350 ms
byte - old - buffer: 2900 ms
float - new - list: 249 ms
float - new - buffer: 8 ms
float - old - list: 330 ms
float - old - buffer: 2880 ms
Get pixel colors:
byte - list: 128 ms
byte - buffer: 9 ms
float - list: 125 ms
float - buffer: 8 ms
```
**Observations**
The best set and get speed can be achieved with buffers and a float image,
at the cost of higher memory consumption. Furthermore, using buffers when
using `pixels = ...` is incredibly slow, because it is not optimized.
Optimizing this is possible, but might not be trivial (there were multiple
attempts afaik).
Float images are faster due to overhead introduced by the api for byte images.
If I profiled it correctly, a lot of time is spend in the `[0, 1] -> {0, ..., 255}`
conversion. The functions doing that conversion is `unit_float_to_uchar_clamp`.
While I have an idea on how it can be optimized, I do not know if it can be done
without changing its functionality slightly. Performance wise the best solution
would be to not do this conversion at all and accept byte input from the api
user directly, but that seems to be a more involved task as well.
Differential Revision: https://developer.blender.org/D7053
Reviewers: JacquesLucke, mont29
The code was copied from the Alembic exporter, and some of the options are
no longer used.
Not updating the Alembic exporter itself, as this will be done in a much
larger rewrite.
Both are doing almost the same and can be merged. This reduce complexity for user and less code to maintain.
Reviewed By: mendio, pepeland, fclem
Differential Revision: https://developer.blender.org/D7134
The Deform modifiers was reallocating buffers that only fit the vertices
of the inner loop. This patch first counts the maximum needed buffer and
allocates one.
When using the daily dweebs animation file the playback performance went
from 0.66 fps to 0.93 fps.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D7132
If one of the faces connected to a vertex is hidden in the face sets, we
can assume that the vertex is part of a boundary edge, so it should be
cosidered like that in all automasking and edge detection functions.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7126
The idea of the visibility system is that tools should behave like
hidden vertices do not exist, so the flood fill operation should ignore
hidden vertices for all operators.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7125
The face set ID is sequential, so implementing this was straightforward.
Suggested by Jeroen Bakker
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7123
The face_set_set function which sets a face sets given a vertex index
can ignore all modifications to hidden face sets, so we can skip all
vertex visibility checks outside that function. This makes the code
faster, simpler and fixes multiple bugs.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7122
The previous solution was also working fine as the white face set has no
meaning, but now it is a little bit more random. Also, bigger face sets
have more chance of getting the white color.
Reviewed By: jbakker
Maniphest Tasks: T74646
Differential Revision: https://developer.blender.org/D7111
The mesh provided in the report has 0 area faces and overlapping
vertices, causing the relax code to fail when calculating the plane to
constraint the vertex movement. Now it works fine both in the brush and
in the mesh filter.
Reviewed By: jbakker
Maniphest Tasks: T74648
Differential Revision: https://developer.blender.org/D7109
If the relax mesh filter was used on a non manifold mesh with open
boundaries, all the vertices were relaxed and the mesh was shrinking.
This was an unintended behavior that was making the filter unusable with
these meshes.
The mesh filter is now initializing an automasking buffer using the same
boundary automasking function from the brush code. Now edges are
preserved and the relax filter works as it should.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7097
Embedded data should always be considered as outside of Main database
here.
Note that it's a bit of an edge case to decide whether those should
always have their `LIB_TAG_NOMAIN` set too, or not? For now, let's keep
things as they are here.
The behaviour of GP layers is the same as annotation layers: they show
in the dope sheet regardless of whether they have frames or not. This is
easily resolved by adding some extra filtering.
Part of the function was following an "if-ok: do-this" pattern, and then
mid-function switched to a "if-bad: skip" pattern. The function now just
uses the latter.
No functional changes.
Some draw state bits are mutual exclusive. This patch will free some
draw state bits by packing the mutual exclusive bits in a mask.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D7088
- Use typed enum for line_data callback.
- Pass in 'const' arguments where possible.
- Use 'r_' prefix for return arguments.
- Remove unused return value from line_get callback.
- Remove redundant casts.
This extends the ocean modifier to add new spectra
(Pierson-Moskowitz, Jonswap, TMA).
These models are very different to the Phillips spectrum.
They are intended for more established,
large area, oceans and/or shallow water situations.
Bullet currently generates the majority of the warnings
on windows all of them are silly. This patch disables
all warns from bullet for now.
We should revisit this if/when we update bullet
to a newer version.
Reviewed By: sergey brecht
Differential Revision: https://developer.blender.org/D7118
`google::LogMessageFatal::~LogMessageFatal` calls `abort`
which MSVC correctly identifies as 'not returning'
and warns about a potential memory leak.
Given this is intended behaviour and glog is not overly
concerned with shutting down the process nicely, we
can safely ignore this warning.
Rather than passing around void pointers, various Blender image sources now
subclass this. OIIO is also just another type of image loader.
Also fixes T67718: Cycles viewport render crash editing point density settings
This is mostly straightforward, but required some refactoring to ensure that
the default volume material does not always turn on the volume feature for GPU
rendering.
printf is called for a size_t (64 bit on x64) type
but the formatter is `%lu` (32 bit) leading to a
warning with MSVC.
`%zu` is the appropriate formatter.
Was happening when having compositor open with Viewer node attached
directly to Render Layers output.
There were two things involved here:
1. The code which was storing CoW-ed versions of IDs was checking all
IDs for whether they are expanded or not. This was causing access
of freed memory for deleted IDs which do not need CoW (such as IM).
Simple fix: store ID type as a scalar and use early check before
doing more elaborate check based on accessing fields of id_cow.
2. The code which was ensuring view layer pointer is doing CoW for
scene. This isn't an issue on its own, but scene might have an
embedded ID such as compositor which was actually traversed by the
ID remap routines. This was causing remapping procedure to go into
non-updated copy of compositor, accessing freed Viewer image ID.
Solved by not recursing into embedded IDs for datablocks as those
are supposed to have own copy-on-write operations which takes care
of re-mapping.
Reported my Bastien, and also pair-coded with him.
For debug builds we link the against the release mode libs
for C based libraries, which are technically linked against
a different CRT, which the linker will implicitly try to link.
Which results in a linker warning about mixing the debug/release CRT.
This patch prevents the implicit linking of the release
CRT in debug configurations for sub projects that had issues
with it.
We implement cubemap array support for EEVEE's lightcache reflection probes.
This removes stretched texels and bottom hemisphere seams artifacts caused
by the octahedral projection previously used.
This introduce versioning code for the lightcache which will discard any
lightcache version that is not compatible.
Differential Revision: https://developer.blender.org/D7066
This patch is (almost) a complete rewrite of workbench engine.
The features remain unchanged but the code quality is greatly improved.
Hair shading is brighter but also more correct.
This also introduce the concept of `DRWShaderLibrary` to make a simple
include system inside the GLSL files.
Differential Revision: https://developer.blender.org/D7060
Casting a 64 bit pointer to a 32 bit DWORD gave 2 warnings.
Solved by storing the actual DWORD in the registry table.
Would have preferred to use a union, but C++ doesn't let you
initialize anything other than the first field, and C99 style
initializers are not supported until C++20, so this solution
will have to do until then.
Update Dopesheet header to include missing buttons, remove Scene Active only buttton and also removed duplicated search box.
The removed options come from old 2.7x version and they are not required now.
Reviewed By: mendio, pepeland
Differential Revision: https://developer.blender.org/D7107
Select Similar Group and Select Similar Shape had this issue since they
were added. Basically it assumes there is pose data which in some cases
it does not.
This has no user visible impact yet since smoke volumes only support a fixed
set of attributes, but will become important with the new volume object.
For GPU shader compilation, volume grids are now handled separately from
image textures. They are somewhere between a vertex attribute and an image
texture, basically an attribute that is stored as a texture.
Differential Revision: https://developer.blender.org/D6952
This is more in line with standard grids and means we don't have to make
many special exceptions in the upcoming change for arbitrary number of volume
grids support in Eevee.
The workbench shader was also changed to fix bugs where squared density was
used, and the smoke color would affect the density so that black smoke would
be invisible. This can change the look of smoke in workbench significantly.
When using the color grid when smoke has a constant color, the color grid
will no longer be premultiplied by the density. If the color is constant
we want to be able not to store a grid at all. This breaks one test for
Cycles and Eevee, but the setup in that test using a color without density
does not make sense. It suffers from artifacts since the unpremultiplied
color grid by itself will not have smooth boundaries.
Differential Revision: https://developer.blender.org/D6951
Issue revealed by own recent cleanup in rB8820ab4, and moticed by
@brecht, thanks.
Note that am not 100% sure whether we should allow call on lib_query
without a proper valid owner_id, for embedded data-blocks. But this can
be investifated later, so far things have been working like that.
'Private' can be a rather confusing term, especially when considering
its meaning in programming languages.
So now root node trees and master collections are 'embedded' IDs
instead.
The former is always a real, in-Main data-block, while the later, when
different, should be one of those embedded 'private' IDs (like root node
ree or master collection).
- Move gpuPush/Pop from GPU_draw.h into GPU_state.h
as this is for pushing/popping state.
- Add 'GPU_STANDALONE' define, to bypass use of user-preferences
for theme colors and pixelsize, as well as pbvh init/free functions.
Needed to get GHOST tests working again.
I've added a very minimal mesh validation before the Alembic mesh is actually
converted to a Blender mesh. This prevents a specific crash with an example
file attached to T74200.
A default face set color was not being set in previously saved meshes,
so it will always render the default face set with a random color until
the colors were recalculated.
Bump subversion to 283.8
Reviewed By: dfelinto
Maniphest Tasks: T74613
Differential Revision: https://developer.blender.org/D7094
Good to be explicit about the fact that we may still use the pixel
property sub-type when DPI will be applied.
See comments in https://developer.blender.org/D7077.
The 3D view grid size property is a multiplier, not the size of the grid itself.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7085
The Extrapolation Mode menu in the graph editor channel list was
incorrectly using the operator for the Action/Dopesheet editor. The
operator was even missing in the generic dopesheet hotkeys, so
{key Shift E} was listed as hotkey but didn't work. This is now all
fixed.
EasingType was implemented rBdaccaa713b6e for the GraphEditor (but never
made it to the Dopesheet). If you can select Easing Mode in the
DopeSheet, then you should also be able to select the associated Easing
Type.
Thanks @lichtwerk for the initial implementation.
Maniphest Tasks: T65076
Differential Revision: https://developer.blender.org/D6094
Caused by the introduction of UDIM (rBc30d6571bb47).
We need to make sure the tiles ImageUser is set up correctly [especially
the framenr], otherwise BKE_image_acquire_ibuf() and friends will fail
to find the correct ImBuf.
Also instead of initializing a minimal BKE_imageuser_default, now use
an appropriate ImageUser if avaliable and pass this around (instead of
just the tile_number). 2D painting can reuse the Image Editor ImageUser,
for 3D painting we still rely on a default ImageUser in most places, but
at least set the framenr correctly].
This also fixes crashes when doing image operations such as inverting or
resizing on images in a sequence in the Image Editor.
This also fixes color sampling (S) from the 3DView going wrong for image
sequences (would fallback to OpenGL sampling because an ImBuf could not
be found).
Maniphest Tasks: T74425
Differential Revision: https://developer.blender.org/D7022
This started happening after changing filter ID to 64 bit in rB2841b2be3949,
however there was a pre-existing error here in the comparison to detect updates
to filter flags.
When scaling the root bone of a rig to apply a global scale, the
corrective smooth modifier results in wrong deformation due to incorrect
scaling. The delta calculations are not taking into account any scale
value.
To fix it, a scale property is added to the modifier, allowing to set
manually the scale value for the deltas by simply multiplying the
vectors by this value. There is a similar implementation in Maya's Delta
Mush deformer. This property can be for example driven by the scale of
the root bone of the rig, to dynamically update when the animator scale
this bone.
Reviewed By: brecht, sybren
Differential Revision: https://developer.blender.org/D6622
When user used a custom background color, this color was also visible in
material preview mode, when the world opacity was less than 1. This
patch will draw the theme color as it was used to.
It seems like OSX drivers are using standard attributes for passing
gl_VertexID and gl_InstanceID to the vertex shader, and count them in the
limit of MAX_VERTEX_ATTRIBS.
This patch make sure to never use more than 13 attributes by packing some
attributes together.
I could not reproduce the issue, but it looks like it was produced by
this division by 0. In any case, the code here was wrong.
Reviewed By: jbakker
Maniphest Tasks: T74354
Differential Revision: https://developer.blender.org/D6987
This automasking option protects the open boundary edges of the mesh from the brush deformation. This is needed to sculpt cloths and it works nicely with the cloth brush.
It has a Propagation Steps property that controls the falloff of the mask from the edge.
Limitations:
- The automask is recalculated at the beginning of each stroke, creating a little bit of lag in high poly meshes, but it is not necessary. This can be fixed in the future by caching the edge distances, increasing a little bit the complexity of the code.
- The boundary vertex detection in meshes is not ideal and it fails with triangulated geometry, but it is the same as in the smooth brush. After fixing this, we should refactor the smooth brush to use the API and let the automasking option manually control the affected vertices.
- It does not work in Multires (it needs to be implemented in the API). The smooth brush in Multires is also not making boundary vertices.
- The falloff has a visible line artifact on grid patterns. We can smooth the final automasking factors several iterations, but it will make the initialization much slower. This can also be added in the future if we decided to cache the distances.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6705
This only applies to the case where preferences are opened as an editor in
a workspace, not with Edit > Preferences in a new window.
Differential Revision: https://developer.blender.org/D7001
This introduces a variable to store a face set ID which is going to be
rendered white. When initializing a mesh or randomizing the colors, this
variable gets updated to always render a white face set. This way the
face set overlay can be enabled without adding colors to the mesh if
face sets are not in use. After creating the first face set, new colors
are generated randomly like usual.
The face set stored as default does not have any special meaning for
tools or brushes, it just affects the rendering color.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7035
This enables a relax operation that works only on face sets boundaries,
which smooths the jagged edges that are produced when painting or
expanding face sets by sliding the topology without affecting the shape
of the mesh. This has many uses in hard surface sculpting for things
like sculpting panels or smoothing surfaces. It can also help when
working with remeshed topology as it makes the face sets looks better
and more organized if needed.
The operation is implemented as an Shift smooth in the Draw Face sets
tool, similar to the Slide/Relax tool.
The same operation is also available in the mesh filter to smooth all
the face sets boundaries uniformly or to smooth the face set under the
cursor with the Use Face Sets option.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7034
The cloth brush was not using the automasking values when calculating
the mask value on each vertex.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7083
Was crashing SculptSession data will not longer be valid if the total
number of polys is modified when rendering the mesh again.
This deletes all face sets in the mesh when slicing the mask. I'll try
to add code to generate a new face set in with faces that are created
when filling the holes, but for now this avoids the crash.
Reviewed By: brecht
Maniphest Tasks: T74500
Differential Revision: https://developer.blender.org/D7049
Create face sets by visibility needs to check if all face sets of a
vertex are visible to set the new face set. I renamed the functions to
make this more cleare in the API.
I also added a visibility check when creating by mask to avoid modifying
hidden areas.
Reviewed By: brecht
Maniphest Tasks: T74499
Differential Revision: https://developer.blender.org/D7048
Hardness is now a property implemented for all brushes, so this is no
longer needed.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7078
The operator was resetting the mask data when cancelling instead of the
face set data, so it was crashing because mask data was not available
when starting the operator in expand face set mode.
Reviewed By: brecht
Maniphest Tasks: T74492
Differential Revision: https://developer.blender.org/D7043
This way we can change the color generation easily if we want to improve
it in the future. I also added more values to randomize a little bit the
saturation and value of the colors, as previously it was too easy to get
similar colors when creating new faces, forcing you to use the randomize
colors more than necessary.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7042
The problem happens because, in wireframe mode, `bool use_wire` is
always `true`, so the function that draws all edges is the called.
The solution is set `use_wire` as `false` when the mesh has no edges.
This matches the behavior of blender 2.79.
Reviewed By: fclem, brecht
Differential Revision: https://developer.blender.org/D7041
This has been long standing TODO...
Note that remaining usages of BKE_xxx_delete should all be carefully
checked for and utilmately nuked in favor of `BKE_id_delete()`, think we
still have quiet a few bugs hidden in those (code seems to usually
assume those functions do a full ID deletion, which is not the case).
Only covers direct usages of new callbacks from IDTypeInfo.
We still have a lot of those switch/case, many can probably go away
with minimal refactor now, but that will be for later.
In rB7c5a44c71f13 I changed the way transform matrices are loaded from
Alembic. Instead of having the Alembic importer convert matrices from
local (in the Alembic file) to World (to pass to the constraint handling
the animation of transforms), I set the constraint space to
`CONSTRAINT_SPACE_LOCAL`.
This worked thanks to rB7728bfd4c45c. However, that commit was reverted,
which meant that for parentless objects `CONSTRAINT_SPACE_LOCAL` no
longer means "local space".
The situation is resolved by setting the constraint to world space
again, and computing the world matrix in the Alembic importer.
Steps to reproduce were:
* Disable tool settings region in 3D View (View > Tool Settings)
* Split the 3D View and drag all the way down
The removed code doesn't seem to be needed anymore. Tested this on hiDPI
too, seems fine.
These kind of fixes are always tricky, so I wouldn't be surprised if
there are any issues caused by this.
The issue of T72253 was that the density threshold (RNA adapt_threshold) was considering cells as empty cells too early and thus also shrinking the domain too early. The fix for this is to use smaller threshold values for the adaptive domain. This fix gives more flexibility in the UI to do just that.
This commit is a full refactor of the grease pencil modules including Draw Engine, Modifiers, VFX, depsgraph update, improvements in operators and conversion of Sculpt and Weight paint tools to real brushes.
Also, a huge code cleanup has been done at all levels.
Thanks to @fclem for his work and yo @pepeland and @mendio for the testing and help in the development.
Differential Revision: https://developer.blender.org/D6293
Unused no-op operation nodes are not bound to a callback function, and
have no outgoing relations. Incoming relations of such nodes are removed
since ff60dd8b18. However, this was done
too broadly, causing too many relations to be lost and indirectly linked
objects to be unevaluated.
This commit introduces a `DEPSOP_FLAG_FAKE_USER` flag for operation
nodes, which indicates they are not to be removed, even when they appear
to be unused.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7074
Apparently this happened when the object is in a flat view and has
customdata `CD_SCULPT_FACE_SETS`
Differential Revision: https://developer.blender.org/D7073
While it might be handy to have type-less functionality which is
similar to how C++ math is implemented it can not be easily achieved
with just preprocessor in a way which does not have side-effects on
wrong usage.
There macros where often used on a non-trivial expression, and there
was at least one usage where it was causing an actual side effect/bug
on Windows (see change around square_f(sh[index++]) in studiolight.c).
For such cases it is handy to have a function which is guaranteed to
have zero side-effects. The motivation behind actually removing the
macros is that there is already a way to do similar calculation. Also,
not having such macros is a way to guarantee that its usage is not
changed in a way which have side-effects and that it's not used as an
inspiration for cases where it should not be used.
Differential Revision: https://developer.blender.org/D7051
Currently, this change does not bring functional changes.
But it is necessary to extend the use of the snap system for gizmos,
since, after a Undo, the `depsgraph` pointed by the `snap_context`
has its memory invalidated.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D7013
This reverts commit 7728bfd4c4.
Although this brings back an inconsistency in the behaviour of
constraints on objects and bones, people were relying on the old
behaviour, and the new behaviour broke their files.
It is still desired to remove this inconsistency, but it will happen
more gradually.
This allows deleting both collections and objects in the outliner
selection at the same time. This only works using the keyboard shortcuts
(X or Delete).
While this works, a more robust solution should be implemented later to
allow deleting the whole selection from the context menu as well.
Missing changes from one of the renamings of the initial face sets
patch.
Reviewed By: brecht
Maniphest Tasks: T74513
Differential Revision: https://developer.blender.org/D7054
The initial iteration for all symmetry areas is always 0. We were using
1 for the main stroke, so it was 1 step behind.
This was broken for expanding masks and face sets, but with face sets it
is more noticeable.
Reviewed By: brecht
Maniphest Tasks: T74501
Differential Revision: https://developer.blender.org/D7050
By using PBVH_ITER_UNIQUE hidden vertices are skipped, like in the rest of
the brushes and tools.
Reviewed By: brecht
Maniphest Tasks: T74498
Differential Revision: https://developer.blender.org/D7047
This was particularly strange because we had a _free_data() function.
But still the one I replaced was of course the _free() one.
And we should rename the _free_data_ function later to avoid confusions.
Remove Windows special folder FOLDERID_Objects3D. Requires newer SDK.
Differential Revision: https://developer.blender.org/D7014
Reviewed by Brecht Van Lommel
The old convention was easy to confuse with ScrArea.
Part of https://developer.blender.org/T74432.
This is mostly a batch rename with some manual fixing. Only single word
variable names are changed, no prefixed/suffixed names.
Brecht van Lommel and Campbell Barton both gave me a green light for
this convention change.
Also ran clan clang format on affected files.
Part of https://developer.blender.org/T74429.
There's a chance that this causes some issues becaue in some cases we
change from getting the window from context to getting it from somewhere
else.
This moves the `alembic`, `avi`, `collada`, and `usd` modules into a common
`io` directory.
This also cleans up some `#include "../../{somedir}/{somefile}.h"` by
adding `../../io/{somedir}` to `CMakeLists.txt` and then just using
`#include "{somefile}.h"`.
No functional changes.
This is the companion of D7031. That patch adds a new DIMENSIONS node to
the depsgraph for each object that has geometry. However, this node is
only necessary when there are drivers using an object's dimensions as
variable. Since this is rare, it's easiest to remove these nodes after
they turn out to be unnecessary. This is what (almost) happens in this
patch.
Removing nodes from the depsgraph is hard, and there are no functions to
do this yet. Instead, this patch recursively removes all the incoming
relations from unused no-op nodes (i.e. no-op operation nodes without
outgoing connections). Actually removing the nodes will be left as a
future improvement.
I've tested this on a Spring file [1]. Here are there results of blender
--debug-depsgraph-time spring_02_055_A.eevee.blend and letting it run
for a while to stabilise the reported FPS:
master: 11.7 FPS
Just D7031: 11.7 FPS
Just D7033: 11.8 FPS
Both D7031 + D7033: 12.3 FPS
[1] https://cloud.blender.org/p/spring/5d30a1076249366fa1939cf1
Differential Revision: https://developer.blender.org/D7033
`(size_t)(int * int)` will actually cast overflown integer to size_t,
which isn't what was intended here. Correct thing would be to cast
in the following manner `(size_t)int * int`.
In this particular case can as well use function which is designed to
allocate an array of memory without overflow.
Since hair collisions were integrated with the cloth solver
(rBd42a7bbd6ea5), there are a couple of relevant settings which were not
exposed to the User:
- Collision Quality
- Minimum Distance (this was reported in T73842, default of 0.015m was
still limiting in certain scenarios - this can now be made smaller)
- Impulse clamping
- Collision collection
This will add a 'Collisions' panel to Hair Dynamics with those settings
Note: in contrast to 'real' cloth, self-collisions are not supported for
hair
Maniphest Tasks: T73842
Differential Revision: https://developer.blender.org/D7032
Make it obvious that this relates to being in sculpt mode.
ref T74489
Maniphest Tasks: T74489
Differential Revision: https://developer.blender.org/D7044
The docstring was likely copy-pasted, and the return type was not adjusted.
Since the `bpy.msgbus.subscribe_rna()` returns nothing, I just removed the
return type documentation.
Previously, `writedata` was used to store `bNodeSocket->default_value`.
There are a couple of issues with that:
* Breaks if someone tries to load the file on a big endian system (afaik).
* There is a `/* do not use for structs */` comment on `writedata`.
* Depends on `MEM_allocN_len` which should be avoided in my opinion.
* Now it is more apparent, that this should be handled by callbacks as well.
The part in `readfile.c` should work just fine still. I could also do a case
distinction there, but the code would be the same for every case for now.
Just `sock->default_value = newdataadr(fd, sock->default_value);`.
This might change, if we want to store more complex socket type specific data
that does not fit into a single struct.
Differential Revision: https://developer.blender.org/D7039
Reviewers: brecht
Currently the link limit of sockets is stored in bNodeSocket->limit.
This allows for a lot of flexibility, but is also very redundant.
In every case I've had to deal with so far, it would have "more correct"
to set the link limit per socket type and not per socket. I did not enforce
this constraint yet, because the link limit is exposed in the Python API,
which I did not want to break here.
In the future it might even make sense to only support only three kinds of link limits:
a) no links, b) at most one link, c) an arbitrary number links links. The other link
limits usually don't work well with tools (e.g. which link should be removed when a new
one is connected?) and is not used in practice. However, that is for another day.
Eventually, I would like to get rid of bNodeSocket->limit completely and replace it
either with fixed link limits or a callback in bNodeSocketType.
This patch consists of three parts:
**1. Support defining link limit in socket type**
This introduces a new `nodeSocketLinkLimit` function that serves as an indirection to
hide where the link limit of a socket is defined.
**2. Define link limits for builtin sockets on socket type**
Data sockets: one input, many outputs
Virtual sockets: one input, one output
Undefined sockets: many inputs, many outputs (to avoid that links are removed when the type of the socket is not known)
**3. Remove `bNodeSocketTemplate->limit`**
This wasn't used anymore after the second commit. Removing it simplifies socket definitions
in hundreds of places and removes a lot of redundancy.
Differential Revision: https://developer.blender.org/D7038
Reviewers: brecht
We would previously not store the transforms that were added to the
group transform node. This would lead to pointer to allocated memory
being lost and not freed.
This patch will make use of the eDrawType where it was used as a
variable or parameter name. The eObjectDrawType was renamed to eDrawType
as it is also used by `View3DShading.type`.
Motivation the functions get 3 different kind of flag parameters (ImBuf,
DrawType, OffscreenRendering) the naming of the flags were not clear,
leading to mistakes and unnecessary time spend debugging.
This was not set anywhere, code relies on MLOOPUV_VERTSEL everywhere.
BMLoopUV.select_edge was never returning True and wasnt updating uv
select state when set manually.
Afaict, there were no official Addons using this from python.
Resolves T65836
Maniphest Tasks: T65836
Differential Revision: https://developer.blender.org/D6772
There are two ways in which adding/deleting keyframes can fail, but only
one of those was handled. The other would be shown as a successful
add/delete of -2 keyframes.
The `ANIM_apply_keyingset()` returns a value that indicates the number of
changed channels (if nonnegative) or an error state (negative). In the
places where the return value was actually used, this value was stored in
a badly named variable.
This fixes an issue where drivers using `object.dimension` only add a dependency on `GEOMETRY` to the depsgraph, whereas they should also depend on `TRANSFORM`.
This patch adds a new no-op operation that depends on the geometry and transform components to the Parameters component.
An alternative implementation would be to have `RNANodeQuery::construct_node_identifier` return multiple node identifiers. However, this would spread throughout the depsgraph code and unnecessarily force many other functions to either return or handle multiple nodes where in 99.999% of the time a single node would suffice.
The new `DIMENSIONS` node is added for each object. An upcoming patch will go over all no-op operation nodes and remove them from the depsgraph. Since this is a more dangerous operation, it'll be reviewed separately.
Differential Revision: https://developer.blender.org/D7031
Since the bounding boxes are now also being used for effector objects, there needs to be a better name for them. Instead of calling them EmissionMap, which caters only to emission objects, they will now be called FluidObjectBB.
- Keymap items now have 'repeat' boolean which can be set
to make keymap items respond to key repeat events or not.
- Support for X11 & WIN32 (not macOS currently).
This allows for the possibility to perform actions while a key is held
and finish the action upon release.
Thanks to @Severin for review and WIN32 support.
- Use 'int' for counters instead of short.
- Use 'bool' instead of a counter when only a change is being detected.
- Use typed enum for keying set flags.
- Include in comments when a negate error code may be returned.
- Split 'verify_fcurve' into two functions:
ED_action_fcurve_ensure which adds the f-curve if needed.
ED_action_fcurve_find which returns NULL when not found.
Callers of ED_action_fcurve_find had unused 'group'
argument which has been removed.
- Rename verify_adt_action to ED_id_action_ensure
It had an argument to add data which was always true,
remove this instead of splitting in into a separate function.
- Use 'BKE_object_defgroup' prefix for object functions.
- Rename 'defvert_verify_index' to 'defvert_ensure_index'
since this adds the group if it isn't found.
Use only one font icon in File Browser for all platforms. Correct mistake to allow this icon to be used.
Differential Revision: https://developer.blender.org/D7037
Reviewed by Brecht Van Lommel
Face Sets are the new system to control the visibility state of the mesh in sculpt and paint modes. They are designed to work in modes where brushes are the primary way of interaction and they provide much more control when working with meshes with complex shapes and overlapping surfaces.
This initial commit includes:
- Sculpt Face Sets data structures and PBVH rendering.
- Face Set overlay and opacity controls.
- Sculpt Undo support.
- Remesher reprojection support. The visibility state of the mesh is also preserved when remeshing.
- Automasking and Mesh filter support.
- Mask expand operator mode to expand Face Sets (Shift + W) and flood fill areas by connectivity (press Ctrl while expanding).
- Sculpt Mode Face Sets and Visibility API.
- Sculpt Face Sets creation and visibility management operators.
- Operator to randomize the Face Sets colors.
- Draw Face Sets brush tool to create and edit the Face Sets. Drawing on the mesh creates a new Face Set. Pressing Ctrl before drawing modifies the Face Set under the brush at the beginning of the stroke.
- Updated keymap and menu to work with Face Sets from Sculpt Mode (H to toggle visibility, Alt + H to show all, Shit + H to hide).
- Pie menu on the W key with Face common Sets operations.
Know limitations:
- Multires support. The Face Sets and Visibility API needs to be implemented for Multires.
Reviewed By: jbakker, #user_interface, Severin
Differential Revision: https://developer.blender.org/D6070
Adding more Windows special folder locations, used when browsing or bookmarking.
Differential Revision: https://developer.blender.org/D7014
Reviewed by Brecht Van Lommel
Nicer icons for File Browser System and Favorites lists on Mac.
Differential Revision: https://developer.blender.org/D6398
Reviewed by Brecht Van Lommel
Adds a minimal DirectX 11 Ghost context, plus some shared DirectX-OpenGL
resource interface using the NV_DX_interop2 WGL extension. From what I
know, this should be available on modern GPUs. If not, it should fail
gracefully.
There should be no user visible changes at this point.
Needed for DirectX-only OpenXR platforms (e.g. Windows Mixed Reality). I
heard there are other use-cases as well though.
It's known that this currently fails on some AMD systems, but that seems
to be fixable.
Most of this comes from the 2019 GSoC project, "Core Support of Virtual
Reality Headsets through OpenXR"
(https://wiki.blender.org/wiki/User:Severin/GSoC-2019/).
Reviewed by: Jeroen Bakker, Ray Molenkam, Brecht van Lommel
Differential Revision: https://developer.blender.org/D6190
Since `std::deque` is used in a few areas of the Depsgraph, and an
upcoming patch adds one more, it's time it's considered as "commonly
used type".
No functional changes.
"session-wise" here mean while editing a same .blend file. So creating
or opening a new one will reset the uuid counter. This should avoid any
overflow in practice.
Only IDs added to Main database get an uuid, runtime-only ones are not
affected.
This is intended to provide undo with a way to find IDs across several
'memory realms' (undo speedup project).
No behavior change is expected from this commit itself.
Part of T60695.
Differential Revision: https://developer.blender.org/D7007
Enabling viewport denoising causes Cycles to use a multi-device, which always returned NULL when
asked for OSL memory and would subsequently crash. This fixes that by returning the correct OSL
memory pointer from the CPU device in the special viewport denoising multi-device.
Selecting certain child datablocks also selects the parent (e.g.
selecting a pose bone selects the armature). The base was selected, but
the outliner tree element was left unselected. The subsequent selection
sync would then deselect the parent base because it was not flagged as
selected in the outliner.
This led to issues like T74332 where selecting a pose bone in the
outliner did not show drivers in the driver editor unless the armature
was explicitly added to the selection afterwards.
The solution is to also flag the outliner elements as selected when
selecting parent bases.
Differential Revision: https://developer.blender.org/D7029
This feature takes some inspiration from
"RenderMan: An Advanced Path Tracing Architecture for Movie Rendering" and
"A Hierarchical Automatic Stopping Condition for Monte Carlo Global Illumination"
The basic principle is as follows:
While samples are being added to a pixel, the adaptive sampler writes half
of the samples to a separate buffer. This gives it two separate estimates
of the same pixel, and by comparing their difference it estimates convergence.
Once convergence drops below a given threshold, the pixel is considered done.
When a pixel has not converged yet and needs more samples than the minimum,
its immediate neighbors are also set to take more samples. This is done in order
to more reliably detect sharp features such as caustics. A 3x3 box filter that
is run periodically over the tile buffer is used for that purpose.
After a tile has finished rendering, the values of all passes are scaled as if
they were rendered with the full number of samples. This way, any code operating
on these buffers, for example the denoiser, does not need to be changed for
per-pixel sample counts.
Reviewed By: brecht, #cycles
Differential Revision: https://developer.blender.org/D4686
Introduce new IDTypeInfo structure.
Each ID type will have its own, with some minimal basic common info,
and ID management callbacks.
This patch only does it for Object type, for demo/testing purpose.
Moving all existing IDs is a goal of next "cleanup Friday".
Note that BKE_idcode features should then be merged back into BKE_idtype -
but this will have to be done later, once all ID types have been properly
converted to the new system.
Another later TODO might be to try and add callbacks for file read/write,
and lib_query ID usages looper.
This is part of T73719.
Thanks to @brecht for initial idea, and reviewing the patch.
Differential Revision: https://developer.blender.org/D6966
This was raised in T74017, the issue being that we point to `/dev`
version of the manual for the addons when we want to point to a specific
version instead.
Instead of manually updating the URL every release we can do this.
The `bl_info` for addons will need to be updated in the format of
`'doc_url':
{BLENDER_MANUAL_URL}/addons/import_export/scene_gltf2.html",`
Differential Revision: https://developer.blender.org/D6995
When running with debug enabled ('-d' argument),
warnings are printed for add-ons which are not yet updated.
Reminder to name things based on what they do,
not the technologies they use :)
- Use 'BKE_object_material_*', 'BKE_id_material_*' prefix
for functions that operate on Object and ID types.
- Use '_len' suffix for length (matching BLI naming).
- Use '_p' suffix for functions that return a pointer to values
where the value would typically be returned.
Functions renamed:
- BKE_object_material_resize was BKE_material_resize_object
- BKE_object_material_remap was BKE_material_remap_object
- BKE_object_material_remap_calc was BKE_material_remap_object_calc
- BKE_object_material_array_p was BKE_object_material_array
- BKE_object_material_len_p was BKE_object_material_num
- BKE_id_material_array_p was BKE_id_material_array
- BKE_id_material_len_p was BKE_id_material_num
- BKE_id_material_resize was BKE_material_resize_id
- BKE_id_material_append was BKE_material_append_id
- BKE_id_material_pop was BKE_material_pop_id
- BKE_id_material_clear was BKE_material_clear_id
This commit adds bounding box support for emission objects - similarly to flow objects. Before, each effector object had to iterate over the entire domain. Bake times of scenes with multiple obstacles improved significantly with this optimization.
Other improvements that were implemented alongside the bbox feature:
- Option for subframe sampling for effector objects
- Option to enable / disable effectors (can be animated)
- Optimization for static objects. If a flow or effector object does not move and the adaptive domain is not in use, the bake time will be optimized further by reusing the flow / effector grids from the previous frame (no recalculation).
not work for unlocking
Special case for when we do this on "lock":
- locked sequences are not in "selected_editable_sequences"
- use "selected_sequences" in that case
Maniphest Tasks: T74434
Differential Revision: https://developer.blender.org/D7023
The OpenXR-SDK contains utilities for using the OpenXR standard
(https://www.khronos.org/openxr/). Namely C-headers and a so called
"loader" to manage runtime linking to OpenXR platforms ("runtimes")
installed on the user's system.
The WITH_XR_OPENXR build option is disabled by default for now, as there
is no code using it yet. On macOS it will remain disabled for now, it's
untested and there's no OpenXR runtime in sight for it.
Some points on the OpenXR-SDK dependency:
* The repository is located at
https://github.com/KhronosGroup/OpenXR-SDK (Apache 2).
* Notes on updating the dependency:
https://wiki.blender.org/wiki/Source/OpenXR_SDK_Dependency
* It contains a bunch of generated files, for which the sources are in a
separate repository
(https://github.com/KhronosGroup/OpenXR-SDK-Source).
* We could use that other repo by default, but I'd rather go with the
simpler solution and allow people to opt in if they want advanced dev
features.
* We currently use the OpenXR loader lib from it and the headers.
* To use the injected OpenXR API-layers from the SDK (e.g. API
validation layers), the SDK needs to be compiled from this other
repository.
The extra "XR_" prefix in the build option is to avoid mix-ups of OpenXR
with OpenEXR.
Most of this comes from the 2019 GSoC project, "Core Support of Virtual
Reality Headsets through OpenXR"
(https://wiki.blender.org/wiki/User:Severin/GSoC-2019/).
Differential Revision: https://developer.blender.org/D6188
Reviewed by: Campbell Barton, Sergey Sharybin, Bastien Montagne, Ray
Molenkamp
After switching tools, the active vertex can be the same and the cursor
won't update the previews, so the pose_ik_chain_preview will be null.
This often happens in low poly meshes where chances of hovering the same
vertex are high.
Reviewed By: sergey
Maniphest Tasks: T74426
Differential Revision: https://developer.blender.org/D7021
Instead of using anonymous booleans flags, also allows to keep the same
behavior in all cases, without needing special handling from calling
code for our beloved oddballs object proxies...
fails
Exposed by rB50d5c03e2d14.
This was only a problem when _only_ 'Object Data' was made local.
If also e.g. 'Object' or 'Materials' was checked, these were already
making sure realations were updated [DEG_relations_tag_update(bmain)].
Now also call DEG_relations_tag_update(bmain) for the 'Object Data'
case.
I assume the underlying issue is that there is some ID_NEW_REMAP
happening in 'single_obdata_users()' -- including that for 'me-
>texcomesh', which might be responsible for the glitches in selection/
editing? Also not entirely sure why this wasnt a problem prior to
rB50d5c03e2d14.(I assume this was somewhat hidden by the fact this was
always called with a default action being nothing, the user would always
need to access the redo panel. So this might have been hidden by an Undo
step involved?)
Maniphest Tasks: T73797
Differential Revision: https://developer.blender.org/D7020
This would happen when done from editmode, on a mesh with any modifier,
after adding/removing geometry in editmode.
Similar to rBba0870713b9b (which did this for weightpaint and sculpt
already), ensure an evaluated depsgraph, otherwise
'runtime.mesh_deform_eval' would not be up to date causing problems
later.
Maniphest Tasks: T72028
Differential Revision: https://developer.blender.org/D7011
This does not affect the RNA access API, since how the boolean is read from
DNA abstracted away in the API.
Differential Revision: https://developer.blender.org/D7002
USD is being included before the blender headers.
USD includes TBB, which includes the windows headers
which define rad2 as a constant conflicting with a field
with that exact name in the MetaElem dna struct.
Added `-DWIN32_LEAN_AND_MEAN` to keep the windows headers
from defining rad2.
It was missing this local space conversion before calculating the rake
angle.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7008
Metaballs are exported as evaluated polygonal mesh.
USDExporterContext::depsgraph was made non-const to allow calling
`BKE_mesh_new_from_object()`. The alternative was to make the depsgraph
parameter of that function const, but that would be too intrusive as
that would require even more functions to accept a const depsgraph
pointer.
Made an explicit call to the exec function be a blocking call and a call
from invoke (or otherwise) be nonblocking.
Reviewed By: Bastien
Differential Revision: http://developer.blender.org/D7006
Both partial derivatives were evaluated to 0 for a special vertex on
Suzanne model: this is happening on a vertex where two adjacent faces
with 2 common edges are connected (in the nose of Suzanne).
This was breaking multires in this point since tangent matrix is all
zeroes, and hence no displacement can be applied in that vertex.
into account for duplicating actions
Previously actions remained linked after duplication, now this is based
on the User Preferences (PreferencesEdit.use_duplicate_action).
note: default is ON here, so this changes default behavior of separate
operators.
First intuition was to respect _all_ preferences here (e.g. also
duplicating materials if chosen in the User Preferences) but after
consideration this is probably not what the User would expect from such
'modeling' opertions (e.g. separate by loose parts resulting in possibly
many duplicate materials)
Fixes T71038
Maniphest Tasks: T71038
Differential Revision: https://developer.blender.org/D6120
Object Scale was not taken into account.
This lead to reports like T74247 where the user scaled the envelope
distance and radii to the supposedly right values inthe viewport, but
these were actually 'wrong' under the hood. Assigning weights from bone
envelopes seemed like it would fail, but this code would actually take
the armature scaling into account when checking envelope distance and
weight.
ref T74247
Maniphest Tasks: T74247
Differential Revision: https://developer.blender.org/D6964
Recent refactor external dependencies handling (D6642)
improperly linked all library dependencies with public
linkage rather than interface linkage. Causing excessive
(re)builds of subprojects when not needed.
This patch restores the interface linkage.
Reviewed By: brecht sergey
Differential Revision: https://developer.blender.org/D6983
This sampling pattern is particularly suited to adaptive sampling, and will
be used for that upcoming feature.
Based on "Progressive Multi-Jittered Sample Sequences" by Per Christensen,
Andrew Kensler and Charlie Kilpatrick.
Ref D4686
This patch refactors arrow keys navigation to move properties and enum
to generic ED_select_utils.h and property to
WM_operator_properties_select_walk_direction()
No functional change
Reviewed By: Julian Eisel
Differential Revision: https://developer.blender.org/D4771
gizmos are too big
Caused by rB9cac5fa681c5 which fixed the handles for the camera border
gizmo (being much too small)-- which in turn was broken by
rB98e4fbc7cc9e.
Camera border gizmo sets up its matrix_space a bit differently [this is
why we are getting very small values in gizmo_calc_rect_view_scale --
needs more investigation], but instead of breaking it for Light, Image
and Compositor Backdrop, lets just compensate by scaling the Camera
Border Gizmo for now.
Maniphest Tasks: T74278
Differential Revision: https://developer.blender.org/D6991
As explained in T65568 by @LucaRood, the self collision system should exclude triangles that are connected by sewing springs.
Differential Revision: https://developer.blender.org/D6911
Added check to see if the mesh has any polygons at all.
If there are no polygons, the bvh tree data will consist of null
pointers, so skip internal springs if this is the case.
When using Material Previews not all uniform blocks were filled. This
patch will add the renderpass_block when drawing the background.
Note that I wasn't able to reproduce the issue on my system, but
according the the backtrace it most likely solves the issue. I let the
reporter test.
Clay Thumb was using a custom hardness implementation and value to make
it functional. Hardness is now a property of brushes and it is
implemented for all brushes, so this is no longer needed.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6981
Color management currently happens after the python handlers. This means
that all common drawing operations needs to happen in SRS. The
PyGPUOffscreen requested that the color management was applied, that
resulted into applying colormanagement twice.
This patch makes sure that PyGPUOffscreen.draw_view3d renders in SRS.
There are more code paths that needs to be checked that the correct
space is being requested.
When beveling architectural objects like baseboards or crown mouldings that
may consist of multiple islands, it's useful if the orientation is at least
conistent.
This changes the arbitrary decision of how the orientation should start at a
chain beginning to use the highest side of the profile in the Z direction.
Reviewed By: howardt
Differential Revision: https://developer.blender.org/D6946
While animating sound strips volume within the graph editor, it is possible to set keyframes to negative values.
The drawing code of waveforms wasn't clamping these values to zero and was instead drawing an "inverted" curve
Author: a.monti
Reviewed By: iss
Differential Revision: https://developer.blender.org/D6971
The hardness property moves the brush falloff towards the edges, making
the brush sharper.
This should be the intended way to control the brush falloff instead of
tweaking the falloff curve manually, as it can be mapped to pressure to
make the falloff variable during the stroke.
It is also a good idea to show in the UI that the custom curves is an
advance features and it should almost never be modified when sculpting/
painting unless you want to create some advanced effects. By modifying
the curves freely it is really easy to break the brushes and make them
produce artifacts. This needs to be done in a later after merging the
pending projects to reorganize all the brush properties accordingly.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6902
At least a brush under each tool needs to exist by default in the blend
file to reset its properties. If it does not exist, the user needs to
reset it manually.
Reviewed By: brecht
Maniphest Tasks: T74307
Differential Revision: https://developer.blender.org/D6972
When sculpting on multi user data normals needs to be recalculated to
avoid artifacts. I refactored that line to make it more readable.
Reviewed By: brecht
Maniphest Tasks: T73707
Differential Revision: https://developer.blender.org/D6957
When processing a timer event WM_event_tablet_data returns 0 instead of
the last valid pressure value from the tablet. This always stores the
last pressure value and uses it in case a timer event is being
processed.
Reviewed By: brecht
Maniphest Tasks: T74074
Differential Revision: https://developer.blender.org/D6950
This includes the following changes:
- Use always the angle stored in the StrokeCache when deforming
- Interpolate between the previous and the new sampled angles
- Calculate the cursor matrix only on the 0 radial symmetry iteration
Reviewed By: brecht
Maniphest Tasks: T73947
Differential Revision: https://developer.blender.org/D6901
Now only the hue is different between different strip types, with the
saturation the same for all.
Differential Revision: https://developer.blender.org/D6775
The 'random' unit tests and some examples from the new boolean code
triggered asserts and crashes. This fixes those.
There is a new flag in the input that optionally disables a pass
over input to snap segment edges to other segments.
Removing the 'Large Cursors' option as it is no longer applicable or useful on any platform.
Differential Revision: https://developer.blender.org/D6958
Reviewed by Brecht Van Lommel
This brush has a simple physics solver that helps when sculpting cloth.
- The mass and the damping properties of the simulation are properties of the brush.
- It has two additional radius control to limit the influence and falloff of the simulation.
- Masked vertices are pinned in the simulation, and it applies the sculpt gravity directly in the solver.
- The Cloth Brush has 7 deformation modes with 2 falloff types (radial and plane).
The brush can create the constraints only on the required PBVH nodes, so the simulation is isolated on high poly meshes. As long
as the brush size is not too big it should be possible to keep it real time.
Known issues:
- The way constraints are created is extremely basic and it creates repeated constraints. Maybe there is another way to create fewer constraints while keeping the simulation quality decent. This part can also be multithreaded. (As it is it works ok, but it could be better)
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6715
The coordinates should be read from the PBVH when using deform modifiers.
This is needed for the cloth brush to work with subdivisions, as it reads the
vertex coordinates using this function when building and updating the
constraints.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6967
Updates include:
- std::move() cleanup in rcmatrix.h
- Enabled parallelization for fluid guiding (fairly noticeable speed improvement).
- More flexible flags setter function with control over boundary width.
This fixes denoising being delayed until after all rendering has finished. Instead, tile-based
denoising is now part of the "RENDER" task again, so that it is all in one task and does not
cause issues with dedicated task pools where tasks are serialized.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6940
This makes the memory allocation for the denoiser state use the memory allocator in Cycles, which
will evict textures to host memory when there is not enough space on the device. This means the
allocation for the denoiser state won't just fail if there is no more space and instead more space is
made for it to work. Also simplifies code somewhat.
Fix for fix (rB8bf7ca9fe31c).
The fix was not actually working [neither for multi-armature-editing as
intended nor for single armatures] and it broke single-armature bone
separation completely.
More or less indentation issue, move relevant code out of bone loop, do
after all bones have been checked, guess this was intended anyways.
Differential Revision: https://developer.blender.org/D6949
Use BASE_VISIBLE_VIEWLAYER (rather than BASE_VISIBLE_DEPSGRAPH -- which
is not including the 'Hide in Viewport')
Note: the is one case where this still 'fails':
- 'Show only Hidden' plus excluding the parent collection (would be nice
to show those -- but contents of excluded excluded collections dont get
show in any case... this would be more work and for another report...)
Maniphest Tasks: T71611
Differential Revision: https://developer.blender.org/D6953
Useful for cases when topology does not need to have any
crease or UV layers. Now instead of assigning callbacks
which returns zero data is possible to simply assign the
callback itself to NULL.
This is in preparation of new object types. This only changes mesh_eval, we
may do the same for mesh_deform_eval and other areas in the future if there is
a need for it.
This previously caused a bug in T74283, that should be fixed now.
Differential Revision: https://developer.blender.org/D6695
This reverts commit f2b95b9eae.
Fix T74283: modifier display lost when moving object in edit mode.
The cause is not immediately obvious so better to revert and look at this
carefully.
Under the special circumstance of double clicking and then opening a
panel with sub-panels again, the parent panel's offset in y-direction
was added twice to the child panels: once inside "get_panel_real_ofsy"
and once within "align_sub_panels".
This introduced a visible glitch.
Reviewed by: Julian Eisel
Differential Revision: https://developer.blender.org/D6942
Was affecting quad faces. where 0 was always passed for inner
loops and a wrong one for boundary ones.
In the current code this change shouldn't cause any difference
since the corner index is ignored in the actual callback, but
it is required to have his fixed for an upcoming changes.
The apparent off-by-one error was caused by a few factors:
- The 'blend base' colour was green for the two frames directly
surrounding the current frame, but black for the current frame itself.
- For the frames before the current one, the 'blend base' was mixed with
black, making the green stand out clearly, but fading to black again
for the current frame. This looks like an off-by-one, even though it
was just bad mixing.
- For the frames after the current one, the 'blend base' was mixed with
cyan, which already has a strong green component, so mixing it there
was much less visible, making the entire thing look like an off-by-one
error where it actually wasn't.
I have simplified the code, so now it only chooses green as the 'blend
base' for the current frame, and simplified the mixing for the current
frame.
This further separates requested attributes and textures from the actual
node graph, that can be retained after the graph has been compiled and
freed. It makes it easier to add volume grids as a native concept, which
sits somewhere between an attribute and a texture.
It also adds explicit link types for UDIM tile mapping, rather than
relying on fairly hidden logic.
System GLEW often is not new enough, which gives error on startup. The build
correctness should not be affected by using lite vs. full, so better to leave
this out than save compiling one extra file.
Cycles recently fixed this issue, EEVEE needed to be adapted to output
similar results in the light passes.
This patch implements cycles `safe_divide_even_color` function to a GLSL
function that will be used when extracting the light passes.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6948
Shadow could penetrate occluded geometry. This patch adds a check to see
if the light is in the right location to light the pixel.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6918
This is in preparation of new object types. This only changes mesh_eval, we
may do the same for mesh_deform_eval and other areas in the future if there is
a need for it.
Differential Revision: https://developer.blender.org/D6695
The dope sheet, NLA editor, and other similar animation editors were
ignoring the temporariy visibility flag of collections. As a result, an
editor that's supposed to show animation data of visible objects only was
still showing such data of objects that were hidden by hiding their
collection.
This was observed while fixing T71743.
Cycles uses the display_space_shader it gets from Blender. When
requested the shader used to be a GPU_SHADER_2D_IMAGE_COLOR, which
set the `color` uniform incorrectly. This resulted in a yellowish tint
when used.
To fix this the `GPU_SHADER_2D_IMAGE` shader will be used.
Reviewed By: brecht, fclem
Maniphest Tasks: T74119
Differential Revision: https://developer.blender.org/D6921
Bug was introduced by the render passes. We had to tweak the bloom
shader a bit so we could reuse it. After that tweaking the original
alpha was ignored.
This patch will read and store the correct alpha channel.
Don't use -ffast-math functions for libc compatibility implementation, since
then the function ends up calling itself. This may not be ideal for performance
but should be insignificant in practice.
When disabling AO or BLOOM in the render tab, when the pass is shown in
a 3d viewport the pass wasn't reset. This resulted in showing a black
texture and a not filled UI render pass in the shading popover.
This patch will by default reset to the combined pass. It is intended
that the render_pass in the 3d shading struct isn't set to combined as
people could have disabled AO/bloom by mistake and it could reset
viewports that aren't visible.
When disabling AO or BLOOM in the render tab, when the pass is shown in
a 3d viewport the pass wasn't reset. This resulted in showing a black
texture and a not filled UI render pass in the shading popover.
This patch will by default reset to the combined pass. It is intended
that the render_pass in the 3d shading struct isn't set to combined as
people could have disabled AO/bloom by mistake and it could reset
viewports that aren't visible.
This clarifies logic in ED_object_add_generic_get_opts (see comments in
code).
Also following issues are adressed:
- do not enforce setting the op UI to WORLD when rotation is set (e.g.
on redo). This is not wrong (happens in world space), but is more
confusing than helpful (was added in own rB3b8a14a3c072).
- respect setting the User Preference to WORLD properly (could fail when
set to something else, then back to WORLD)
Maniphest Tasks: T69576
Differential Revision: https://developer.blender.org/D6943
This fixes {T70269}.
Before this commit there was complicated code to try and compute the
correct parent inverse matrix for the 'Child Of' and 'Object Solver'
constraints outside the constraint evaluation. This was done mostly
correctly, but did have some issues. The Set Inverse operator now defers
this computation to be performed during constraint evaluation by just
setting a flag. If the constraint is disabled, and thus tagging it for
update in the depsgraph is not enough to trigger immediate evaluation,
evaluation is forced by temporarily enabling it.
This fix changes the way how the inverse matrix works when some of the
channels of the constraint are disabled. Before this commit, the channel
flags were used to filter both the parent and the inverse matrix. This
meant that it was impossible to make an inverse matrix that would
actually fully neutralize the effect of the constraint. Now only the
parent matrix is filtered, while inverse is applied fully. As a result,
pressing the 'Set Inverse' matrix produces the same transformation as
disabling the constraint. This is also reflected in the changed values
in the 'Child Of' unit test.
This change is not backward compatible, but it should be OK because the
old way was effectively unusable, so it is unlikely anybody relied on
it.
The change in matrix for the Object Solver constraint is due to a
different method of computing it, which caused a slightly different
floating point error that was slightly bigger than allowed by the test,
so I updated the matrix values there as well.
This patch was original written by @angavrilov and subsequently updated
by me.
Differential Revision: https://developer.blender.org/D6091
While one issue of the report was fixed already (rB27adc4aa3347), still a
couple of clarifications could be made:
- correct/clarify which modes these apply to
- clarify that "Face Mask" is a paint thing
Maniphest Tasks: T54323
Differential Revision: https://developer.blender.org/D6797
UI
Main issue is that the UI doesn not respect the Unified Weight/Strength
setting (but instead alwasy shows the brushes weight/strength)
Was working before, but somewhat missed in rBfb74dcc5d69d.
See discussion in T74025 on why the Gradient Tool in its current state
is not very user friendly in general, what I think we should do though
is at least have the values in the UI respect Unified Weight / Unified
Strength since this is what the tool will use internally...
ref T74025
Maniphest Tasks: T74025
Differential Revision: https://developer.blender.org/D6900
Change to false color are based on artist feedback:
* Even 2.5 EV differences down to -10 EV.
* Even 2.167 EV differences up to +6.5 EV.
* Slightly below middle grey biased toward cyan.
* Slightly above middle grey biased toward yellow.
* Converts to nonlinear luma for more accuracy.
On Linux, precompiled libraries may be made with a glibc version that is
incompatible with the system libraries that Blender is built on. To solve
this we add a few -ffast-math symbols that can be missing.
Differential Revision: https://developer.blender.org/D6930
Based on work by Nathan Craddock, with further changes to apply it to all
precompiled libraries.
Differential Revision: https://developer.blender.org/D6929
If the current frame was not in range, the ImageTile's 'ok' was stuck at
0. Similar to the ImageUser being reset to 'ok' in
BKE_image_user_frame_calc, we now do for ImageTiles as well.
note: the crasher part of T74225 was fixed in rB5c490d437743.
Maniphest Tasks: T74225
Differential Revision: https://developer.blender.org/D6939
The slashed were used for comparing bookmarks to the current directory.
Add trailing slashes in 'fsmenu_insert_entry',
which avoids having to duplicate strings just to add a slash
before passing to this function.
Currently, there its a function that sets manually the fully_hidden flag
of the nodes from the visibility operators in paint_hide.c. The undo
code was not updating the flag, so the visibility state of the nodes was
incorrect after preforming undo operations. This sometimes was drawing
fully hidden nodes with empty buffers, causing artifacts in the
geometry.
I added a function to mark nodes which visibility state changed (similar
as we are updating the mask flags and the nodes bounding boxes). This
way, the tools, operators and undo code don't have to update the
visibility flags, making everything much simpler to understand and
maintain.
I did not remove the flag update code from the current visibility
operators in this patch, but after reimplementing them (and all the new
ones) in the new visibility system, all visibility updates should be
done using this method and the BKE_pbvh_node_fully_hidden_set function
should be removed.
Reviewed By: jbakker
Maniphest Tasks: T72721
Differential Revision: https://developer.blender.org/D6767
This un-indents the `childof_evaluate()` function by one level, making it
easier to add new functionality in an upcoming commit.
No functional changes.
The 'Clear Inverse' operator didn't properly update the constraint, so
it didn't do anything until the entire depsgraph was updated. It's now
properly tagged for update.
In the collections unit test file developers can now disable layer
collections and declutter the 3D Viewport while working in
`constraints.blend`, without influencing the actual unit tests themselves.
Lots of fixes and cleanups, mainly addressing:
* OpenEXR building was fully broken.
* Missing dependencies of Alembic to Boost and openEXR.
* OSL had changed its CMake parameters for custom OpenEXR install path.
* Dependencies between libs were not properly handles when switching a
lib from own build to system package.
SSS buffers are lazy initialized when needed. When shaders recompile the
SSS buffers could be incorrectly drawn. During the render passes project
we tried to fix this, but that resulted in incorrect result of the first
sample after a shader was compiled.
We revert this change knowing that we know the issue, but haven't found
a proper solution for it.
This patch adds a new user-configurable option to change at which sample viewport
denoising should kick in. Setting it to zero retains previous behavior (start immediately), while
other values will defer denoising until the particular sample has been reached. Default is now
at one, to avoid the weirdness that is AI denoising at small resolutions.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6906
This patch adds the ability to set colors and alpha of dashed line of
Time Markers. That way themes can avoid contrast issues and communicate
selection better. See screenshots in D6877.
Bumps subversion.
Reviewed By: William Reynish, Julian Eisel
Differential Revision: https://developer.blender.org/D6877
This adds the `Half Float Precision` option in the image property panel.
This option is only available on float textures and is enabled by default.
Adding a flag inside the imbuf (IB_halffloat) on load is done for EXR and PSD formats that can store half floating point (16bits/channels).
The option is then not displayed in this case and forced.
Related task T73086
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6891
This takes the idea from the aaOcean library to link the RNG seed to the
surface point, so that changing resolution only adds/remove surface detail.
Differential Revision: https://developer.blender.org/D6871
Currently this only tests the Child Of constraint. My aim is to cover
constraints with tests before they are refactored/altered.
No functional changes.
This is using the GGX probe as background. This has the drawback of
having the resolution choosed in the indirect lighting setting.
The blurring is not really high-quality.
The pros is that it has a simple implementation and is fast to evaluate.
This patch also fades the background alpha to make overlay engine draw the
default background color in the correct color space. Removing one colorspace
hack.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6895
This simplifies compositors setups and will be consistent with Eevee render
passes from D6331. There's a continuum between these passes and it's not clear
there is much advantage to having them available separately.
Differential Revision: https://developer.blender.org/D6848
Put DefaultFramebufferList and DefaultTextureList into an own header
file. These structs were private, but also used by the window manager
and gpu package. The previous implementation we needed to keep these
structs in sync.
The OpenCOLLADA package contains a mix of files with unix and dos line endings.
Now we mark the diff as a binary file so that the patch also contains a mix of
line endings that matches the package.
With the OptiX viewport denoiser active, an OptiX device was added to the device list even when
rendering and denoising on different devices (e.g. CPU or CUDA) in background rendering. This
fixes it, so the OptiX device is only added when actually needed, as in only when OptiX denoising is
actually active in background rendering.
Also cleaned up code there, making a proper poll function for the apply
modifier operator, that way button is properly disabled in UI itself in
most invalid situations.
The collection property `loop_triangles` was given the RNA type
`MeshLoopTriangle` (the type of the collection's items), instead
of `MeshLoopTriangles` (the actual expected RNA collection/array type).
The cutest, tiniest typo mistake in RNA code, leading to some complete
non-sense... It's fairly amazing that this did not cause more severe
issues actually.
The current code allocates and transfers a lot of memory to the GPU,
but only a small portion of this memory is actually used.
In addition, the code calls many costly gl operations during the
caching process.
This commit significantly reduce the amount of memory by allocating
and transferring a flat array without pads to the GPU.
It also calls as little as possible the gl operations during the cache.
This code also simulate a billinear filter `GL_LINEAR` using a 1D texture.
**Average drawing time:**
|before:|0.00003184 sec
|now:|0.00001943 sec
|fac:|1.6385156675048407
**5 worst times:**
|before:|[0.001075, 0.001433, 0.002143, 0.002915, 0.003242]
|now:|[0.00094, 0.000993, 0.001502, 0.002284, 0.002328]
Differential Revision: https://developer.blender.org/D6886
Since this control is set as you drag in the viewport anyway, this amount value is effectively useless.
It was only recently added by mistake with the Bevel GSOC.
- Move gizmo cursor check into ED_region_cursor_set so the result of
calling this function is the same as flagging for cursor update.
- Use tagging in ui_popup_block_remove which avoids adding a
mouse-move event in case the cursor needs to be changed again.
- Fixed uninitialized result used in DynamicMusic::seek().
The comment to this function says false is returned if the handle
is invalid, while in practice non-initialized value will be returned.
- Spelling typos in comment.
- Silence -Wdelete-non-abstract-non-virtual-dtor warning.
Differential Revision: https://developer.blender.org/D6896
File Browser using Windows file attributes for decorating and hiding items.
Differential Revision: https://developer.blender.org/D6816
Reviewed by Campbell Barton
This fixes a threading issue (T73593) between drivers that write to the
same memory address. Driver nodes in the depsgraph now get relations to
each other in order to ensure serialisation.
These relations are only added between drivers that target the same
struct in RNA, which is determined by removing everything after the last
period. For example, a driver with data path
`pose.bones["Arm_L"].rotation_euler[2]` will be grouped with all other
drivers on that datablock with a data path that starts with
`pose.bones["Arm_L"]` to form a 'driver group'.
To find a suitable relation within such a driver group, say the relation
(from → to), a depth-first search is performed (turned out to be
marginally faster than a breadth-first in my test case) to see whether
this will create a cycle, and to see whether there already is such a
connection (direct or transitive). This is done by recursively
inspecting the incoming connections of the 'to' node and thereby walking
from it towards the 'from' node. This is an order of magnitde faster
than inspecting the outgoing connections of the 'from' node.
This approach generalises the special case for array properties, so the
code to support that special case has been removed from
`DepsgraphRelationBuilder::build_animdata_drivers()`.
A test on the Spring rig [1] shows that this process adds approximately
8% to the build time of the dependency graph. In my test case, it takes
28 ms for this process on a total 329 ms construction time. However,
since it also made some code obsolete, it only adds 24 ms (=8%) to the
construction time. I have experimented with a simple cache to keep track
of known-connected (from, to) node pairs, but this did not significantly
improve the timing.
Note that animation data and drivers are already connected by a
relation, which means that animating a field and also changing it with a
driver will not cause conflicts.
[1] https://cloud.blender.org/p/spring/5d30a1076249366fa1939cf1
Differential Revision: https://developer.blender.org/D6905
Reviewed By: sergey, mont29
Updates include:
- A fix from Jacques that changed the loop order in the mesh creation function (the fix speeds up the function significantly due to fewer cache misses).
- Some of the grid copy helper functions are now multithreaded.
- A fix for Windows file IO. Now it possible to load files with non ASCII characters on Windows too.
bone constraints settings
'UI_context_copy_to_selected_list()' was working fine for constraints on
objects (would properly get the path and list of selected objects) and
also for bone settings (would properly get the path and list of bones).
There was no special case for constraints on bones though, so code would
work on selected objects (not selected bones).
So we now get the right bones and resolve the path to the constraint
setting _from the bones_.
Maniphest Tasks: T74006
Differential Revision: https://developer.blender.org/D6897
This partially fixes T73593.
The `add_relation(driver_key, property_entry_key, ...);` call can fail
in the following situation:
- A collection is linked, and instanced into the scene by an Empty.
- The collection contains an object with a driver on its `hide_render` or
`hide_viewport` property.
As the object doesn't exist as a real object in the scene, it's added with
`base_index=-1` to the depsgraph (see `DepsgraphNodeBuilder::build_collection()`).
As a result the node for syncing the restrictflags back to the base
isn't present in the depsgraph, and the `add_relation()` call failed.
This commit fixes the warning, simply by not attempting to add the
offending relation.
This patch adds new render passes to EEVEE. These passes include:
* Emission
* Diffuse Light
* Diffuse Color
* Glossy Light
* Glossy Color
* Environment
* Volume Scattering
* Volume Transmission
* Bloom
* Shadow
With these passes it will be possible to use EEVEE effectively for
compositing. During development we kept a close eye on how to get similar
results compared to cycles render passes there are some differences that
are related to how EEVEE works. For EEVEE we combined the passes to
`Diffuse` and `Specular`. There are no transmittance or sss passes anymore.
Cycles will be changed accordingly.
Cycles volume transmittance is added to multiple surface col passes. For
EEVEE we left the volume transmittance as a separate pass.
Known Limitations
* All materials that use alpha blending will not be rendered in the render
passes. Other transparency modes are supported.
* More GPU memory is required to store the render passes. When rendering
a HD image with all render passes enabled at max extra 570MB GPU memory is
required.
Implementation Details
An overview of render passes have been described in
https://wiki.blender.org/wiki/Source/Render/EEVEE/RenderPasses
Future Developments
* In this implementation the materials are re-rendered for Diffuse/Glossy
and Emission passes. We could use multi target rendering to improve the
render speed.
* Other passes can be added later
* Don't render material based passes when only requesting AO or Shadow.
* Add more passes to the system. These could include Cryptomatte, AOV's, Vector,
ObjectID, MaterialID, UV.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D6331
editmode
This was already supported in "Select" & "Deselect" but not in "Assign".
So similar to rB6b39dc7672eb, we now check if the material corresponding
to the currently selected material slot is found in other objects
materials and assign this (instead of always assigning their 'own'
actcol).
Maniphest Tasks: T73871
Differential Revision: https://developer.blender.org/D6869
PAINT_TEXTURE)
This fails because some tool contexts define their tools with functions
[see the following list for context that fail]:
- PARTICLE (_defs_particle.generate_from_brushes)
- SCULPT (_defs_sculpt.generate_from_brushes)
- PAINT_TEXTURE (_defs_texture_paint.generate_from_brushes)
- PAINT_VERTEX (_defs_vertex_paint.generate_from_brushes)
- PAINT_WEIGHT (_defs_weight_paint.generate_from_brushes)
- PAINT_GPENCIL (_defs_gpencil_paint.generate_from_brushes)
- SCULPT_GPENCIL (_defs_gpencil_sculpt.generate_from_brushes)
- WEIGHT_GPENCIL (_defs_gpencil_weight.generate_from_brushes)
ToolSelectPanelHelper._tools_flatten() is usually called with
cls.tools_from_context(context) [that already yields from the function].
But when registering a tool, _tools_flatten() will still give back this
function, not a ToolDef - and we cannot get a bl_idname from that.
Now check for this and yield None in that case.
Also share logic across all tool_flatten functions:
- _tools_flatten
- _tools_flatten_with_tool_index
- _tools_flatten_with_keymap
Maniphest Tasks: T63892
Differential Revision: https://developer.blender.org/D6763
The latest versions of Embree support Catmull-Rom splines
which use less memory than the previously used Hermite splines.
The representation is also much closer to Cycles own data structures
and can hopefully be unified in the future for more memory savings.
Memory savings using Victor benchmark scene:
Compared to previous Embree: ~400MB
Compared to Cycles' native BVH: ~1GB
Consequences of own refactor of usercount handling in readfile.c
(rB367ecff15d74).
Not super happy to have to call that function twice, but that should be
OK (not a real overhead here anyway).
The functionality of the mask modifier remains unchanged.
This patch updates the mask modifier so that it uses C++.
The manual memory management has been replaced with proper containers.
The large `applyModifier` function has been splitup into multiple smaller functions.
A large speedup is achieved by using simple arrays instead of hash tables in multiple places.
In my performance test file the playback speed increased from 1.1 to 5.1 fps on my laptop.
Reviewers: campbellbarton, brecht
Differential Revision: https://developer.blender.org/D6779
The problem is that Custom Shape Bones can also have a custom size.
So the pchan->disp_mat doesn't always consider the actual length of the bone.
The proposed solution is to calculate the axes matrix at the drawing pass.
Ref T65640
Reviewed By: fclem
Differential Revision: http://developer.blender.org/D5049
We detect the case where we need to invert the facing directly inside the
DRWView update and do the appropriate GL calls at draw time.
Fix T63047 Camera with negative scale works only in Cycles Rendered view
Fix T71352 Negative scale camera causes BLI_assert
This commit replaces the "Use Gradient" checkbox theme option with an
enum and implements a radial background.
Whith this change, it should be easier to implemet other types of more
complex background types, like a world space oriented gradient.
Reviewed By: billreynish, fclem, brecht
Differential Revision: https://developer.blender.org/D6825
It does not make sense to read those values when loading a file and they can crash the cursor if they contain invalid coordinates.
Reviewed By: brecht
Maniphest Tasks: T54270
Differential Revision: https://developer.blender.org/D6754
By pinching this way, we can fix some artifacts when sculpting following
the topology direction. It does not make much difference with dyntopo/
remesher, but I think this should improve the quality of the brush when
working with Multires.
Reviewed By: JulienKaspar, jbakker
Differential Revision: https://developer.blender.org/D6587
Depsgraph RNA pointer would generate infinite loop in override comparisons.
Depsgraph pointer should never be considered here anyway, this is purely
runtime data.
Some fluid cache functions were not using Blender's more secure BLI_gzopen() function. On Windows there are some special cases which this function can handle compared to the plain gzopen().
Having that extra ID users handling at readfile level, besides generic
one ensured by libquery, has been something bothering me for a long time
(had to fix my share of bugs due to mismatches between those two areas).
Further more, work on undo speedup will require even more complex ID
refcount management if we want to keep it in readfile.c area.
So idea is instead to generalize what we did for linked data already
when undoing: recompute properly usercount numbers after liblink step,
for all IDs.
Note that extra time required here is neglectable in a whole .blend file
reading (few extra milliseconds when loading a full production scene
e.g.).
Notes:
* Some deprecated data (IPOs) are not refcounted at all anymore, this
should not be an issue in pratice since the are supposed to get deleted
after doversion anyway.
* Refcounting happens after `do_versions_after_linking`, i.e those
functions won't get valid ID usercounts currently. Again, this is not a
problem in current code, if needed we could recompute refcount before,
and then ensure `do_versions_after_linoiing()` actually handles properly
usercount, which it does not currently.
Differential Revision: https://developer.blender.org/D6881
Only use the hack in `key_block_get_data` for the bmesh shapekey.
The remaining shapekeys can use the original offset values.
Differential Revision: https://developer.blender.org/D6516
This commit actually fixes several issues in this modifier, but main one
from the report was caused by adding a `CD_NORMAL` layer to loops to
store temp real clnors. Unless we plan on modifying the topology itself,
this is useless, and would require some additional 'dirty normals'
tagging to work properly, so just switched to simpler, cleaner solution
of having a local array of computed clnors.
The node would render black in this case (but should use the
'active_render' layer choosen in the object data properties -- this is
now in line to how this is handled for e.g. UVs)
This introduces ATTR_STD_VERTEX_COLOR and uses this thoughout, if no
particular layer is specified in the node.
Maniphest Tasks: T73938
Differential Revision: https://developer.blender.org/D6887
The actual naming might also be a subject to change, especially the one
around `level`. Tricky part here is that at some point in the API there
will be change from Blender modifier's Quality to OpenSubdiv's Level,
but which API level is most suitable for this?
At least now meaning of settings is better documented ans should be
clear what's going on.
This applies the change from T73348 fix to related functions.
Instead of checking against an epsilon to avoid divide by zero,
perform the division and check the result is finite.
This is needed since small faces can have an area under 'FLT_EPSILON',
and dividing by values close to zero can result in 'inf'.
This patch provides an optimisation for Ease (Smoothstep) setting in the color ramp node.
This optimisation exists already for Constant and Linear modes.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6880
This patch adds a dedicated path to extract 16bit normals instead of packing them into 10bits/comp.
The tangents are also packed to 10bits/comp if not using the new High Quality Normal option.
Fix T61024 Degraded texture shading on dense meshes
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6614
Under some circumstances, MultiDrawIndirect was disabled to improve perf.
of average scene. But this conflicted with the normal instancing buffer
filling if only 1 or 2 instances were needed to fill the buffer. All
consecutive drawcalls could not be batched together and performance would
degrade rapidly.
This patch make my instance test scene go from 11fps back to 40fps where
it should have been.
Adds the invert vgroup option to the UVWarp modifier. Adds a flag and char padding to the DNA.
Differential Revision: https://developer.blender.org/D6841
Some users reported that the previous red color of the cursor was too
saturated and that can be distracting.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6828
This matches the name in the properties panel for the Blob and Snake
Hook brushes
Reviewed By: brecht
Maniphest Tasks: T73105
Differential Revision: https://developer.blender.org/D6805
cycles_util_avxf_avx2_test failed on the cross test, since
it wasn't immediately clear why, the test was disabled.
After looking into it, this test when build for AVX2 is
generating FMA instructions where the intermediate results
have "infinite" precision [1] leading to slightly different
results.
This diff re-enables the cross test and allows for a small error
in the results.
[1] https://www.felixcloutier.com/x86/vfmadd132ps:vfmadd213ps:vfmadd231ps
Differential Revision: https://developer.blender.org/D6873
Reviewers: brecht
This does not seem to be an actual issue in current master code (as
creating a new ID will assign 1 user to it by default), but is breaking
generic usercount handling in future changes.
The render passes didn't follow the DrawManager way of doing things. It added new geometry and shading groups during drawing. This would make it harder to migrate to Vulkan later on.
This change will re-implement this part by using uniform references.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D6875
Handling those through different ways /might/ be needed sometimes, but
in most case this is just a nest of issues, since you can easily forget
to take them into account.
Note that this should be a 'non-functional' change, as this new behavior
is not used anywhere yet.
Comparing the drive letter was case sensitive,
causing 'BLI_path_rel' to fail in common cases
(manually entering a lower case drive letter for example).
Surprisingly this issue dates back to 2005 and wasn't reported.
Revert change from 5f6c45498c
Excluding enum items meant Python scripts couldn't access them.
This is no longer needed now Area.ui_type is used for the menu.
When you switch between debug/release mode a lot, you could end up
in a situation where the generated RNA code was out of sync between
the two configurations.
There was one function optionally defined with an `#ifndef NDEBUG`
guard, this patch adds a stub implementation for the other configurations
to prevent build errors.
Differential Revision: https://developer.blender.org/D6855
Reviewers: brecht
Seems like sometimes files are being only partially ready, which makes it so there
are unsigned files, failing to deliver fully signed bundle.
Now expected archive file size is stored into stamp file and is checked against
size of the archive file on another side.
There are some bare prints used for debugging, would need to switch it to a proper
logger (or to be removed).
This extends FindOpenShadingLanguage.cmake to also look for the location of
stdosl.h and adds the path to the invocation of oslc to deal with the headers
being in different locations a little better.
Differential Revision: https://developer.blender.org/D6865
Reviewers: brecht
The redo panel does not consider the position of the mouse.
So it is not possible to know the direction to redo the operator.
The solution is to add a new `direction` parameter that can be
saved and used for redo.
Differential Revision: https://developer.blender.org/D6852
Each image that goes through preprocessing is already duplicated in `input_preprocess()`
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6790
Use gpu batch drawing for cache content in VSE.
Immediate drawing caused significant dorp in framerate.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6835
This node provides the ability to rotate a vector around a `center` point using either `Axis Angle` , `Single Axis` or `Euler` methods.
Reviewed By: #cycles, brecht
Differential Revision: https://developer.blender.org/D3789
Rendering with multiple CUDA devices but denoising with OptiX caused parts of the image to go
missing at the start while the resolution was scaled. This is because the copy operation in
`MultiDevice::map_neighbor_tiles` which slices the copy across all devices would slice based on the
full resolution and not the scaled one and therefore copy incorrect data between devices.
Since this is not the recommended way of using viewport denoising anyway, simply avoid those
incorrect copies for now by disabling denoising while the resolution is scaled. Doing both rendering
and denoising with OptiX is not affected by this, since it avoids those copies altogether anyway.
Once again those crappy weirdos IDs with their crappy weirdos 'loopback'
pointers...
This is a quick hack for now, think id_copy needs to be reworked a bit
to supported re-entrant sub-ID copying (also an issue with nodes I bet).
- Unlock property range.
- Use triangular noise to keep perceptual noise error more uniform.
Remap range to preserve perceptual intensity.
- Center noise distribution around 0 for GPU implementation because of
rounding.
- Do dithering after merging overlays.
Effect of using triangular noise is not really noticeable if you don't use
really low bitdepth. But doing a test in the shader were we artificially
reduce the bitdepth (`col = (col * 16) / 16;`) reveals the real difference.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6850
`invoke_props_dialog` and `invoke_popup` had a width and a height field. The height field was ignored as the height is determined based on the content. This change removes the field from the BPY + WM_api
Reviewed By: Campbell Barton, Jacques Lucke
Differential Revision: https://developer.blender.org/D6694
This change will not render the normals for faces that are hidden.
Before we had instance drawing the hidden faces were registered in the
index buffer. During the overlay refactoring the rendering was migrated
to instance rendering. Instance rendering does not use the index buffer
so the data was ignored.
This patch stored the normal visibility in the .w part of the normal or
for face normals it will set the normal to zero. The shader looks at
this and renders the normals fully transparent when detected.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D6798
This modifies the common CUDA implementation for adaptive kernel compilation slightly to support both CUBIN and PTX output (the latter which is then used in the OptiX device). It also fixes adaptive kernel compilation on Windows.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6851
* Direction mode X, Y and Z to align with axes rather than diagonal or
spherical as previously. X is the new default, existing files will
use diagonal or spherical for compatibility.
* Phase offset to offset the wave along its direction, for purposes like
animation and distortion.
https://developer.blender.org/D6382
This patch exposes the Window Manager `is_interface_locked` as a read
only property to python.
This property is needed to allow script writers to detect if a job is
running with locked interface like the Alembic exporter.
Reviewed By: Brecht
Differential Revision: https://developer.blender.org/D6749
This separation between reader and writer code is part of Milesone 2 of
T73363.
In this commit the reader and writer classes are separated into their
own files, any `#include` and `using` statements are cleaned up, and
some separator comments have been removed.
No functional changes.
There are two issues solved in this commit:
- Our Windows buildbot has slightly different floating point errors than
the Linux one, which meant a larger delta was required for float
comparisons.
- The test performs an export to a temporary Alembic file and
subsequently imports it. Deleting the temporary file was impossible on
Windows because it was still in use. This is now resolved by first
loading the default blend file before deleting the Alembic file.
Since this tool doesn't perform selections when you click, it's important that the cursor helps communicate that something else will happen.
Also fix missing 'to' in Curve Edit Mode.
This avoids the ambiguity with the Cut operator in the Sequencer, which could be confused with Cut/Copy/Paste.
Use 'Split' for the operator and 'Blade' for the active tool.
Patch by Nathan Lovato, with edits
Differential Revision: https://developer.blender.org/D5542
There seems to have been no particular great reason why we were activating tools using a tweak event with MMB.
This change makes it so tools are activated with a press event instead.
The user theme is loaded after window creation so we should create the
window with a color that at least matches the default theme.
Differential Revision: https://developer.blender.org/D6858
Two main reasons for the lag:
- Allocation of memory with transfer to GPU.
- BLF_cache_clear();
The (partial) solution is to avoid memory allocating in some setups
through the `GPU_texture_clear`.
Differential Revision: https://developer.blender.org/D6837
This is needed so pose keymap doesn't override weight paint,
which currently prevents the weight paint context menu from showing.
Logically pose mode is secondary when used in combination with
weight paint, so evaluate it afterwards.
Also move vertex paint keymap since they have a lot in common,
it's simpler to keep them evaluated at the same place.
Resolves T73384
When a vertex between two edges is being collapsed,
it's important that edges between delimiting faces use the
angle between edges without scaling it down.
While faces with different materials wont ever be merged into a single
face, all the detail between the two faces may be removed.
Currently the only option is to warp based on the transform of other
objects, which is inconvenient if you want to e.g. control it through
a driver - you need to set up a dummy object and go through that,
which is clunky and should be unneccessary.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6690
This adds some extra functions recently added to the float Maths Node.
Not all functions have been ported over in this patch.
Also:
+ Tidy up menu
+ Change node color to match other vector nodes, this helps distinguish vector and float nodes in the tree
+ Move shared OSL functions to new header node_math.h
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6713
Steps to reproduce were:
* Add new (empty) scene
* Add some mesh object
* Change to texture paint mode
While it can be argued that we should already init the settings when
creating a new scene (so that the texture tab can show up),
BKE_paint_init() should always ensure paint settings are initialized
either way.
Related to T73611.
Sometimes the viewport buffer size is zero for a frame, which caused the denoising task to also try to
launch CUDA kernels with a launch size of zero, which in turn failed with a CUDA error. This patch
prevents launches from occuring in this case, similar to how it is handled in `copy_to_display_buffer`.
NOTE: This change shouldn't have any visible effect. It's just the
first (easiest) step towards decoupling gizmo redraws from viewport
redraws.
We currently redraw the entire region whenever a gizmo needs redrawing,
which would be nice to avoid in the future, see T73198. The first step
towards this would be having a separate tag for them, which is what
this patch implements.
The term "editor-overlays" was chosen because for the forseeable future,
we'll also have to redraw non-gizmo overlays in-between drawing 3D and
2D gizmos. Namely annotations.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6838
Fix ReDo and create a new operator to display only the required properties.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6849
The `convert_matrix()` function just converts between the Alembic and
Blender matrix data types, and doesn't do any coordinate system conversion.
To clarify this, the function has now been renamed to
`convert_matrix_datatype()`.
I also moved the implementations next to each other in the source file,
so that it's visible that there are actually two of them.
No functional changes.
The Alembic importer now works with local coordinates. Previously, the
importer converted transformations from Alembic to world coordinates
before processing them further; this processing often included
re-converting to local coordinates. This change made it possible to
remove some code that assumed that a child transform was only read after
its parent transform.
Blender's Alembic code follows the Maya convention, where in the zero
orientation the camera looks forward instead of down. This extra
rotation is now handled more consistently, and now also properly handles
children of cameras. This fixes T73269.
Unit tests were added to at least ensure that the importer and exporter
are compatible with each other, and that static and animated camera
transforms are handled in the same way.
This rename is to prepare for a future addition to the unit test file.
Currently it's named "import" and I will add an export test as well. The
rename is a separate commit to easily see the difference between the
rename and the addition of another test.
No functional changes.
Two main reasons for the lag:
- Allocation of memory with transfer to GPU.
- BLF_cache_clear();
The memory allocation seems to be unnecessary, so I removed it.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6837
Various fixes for smoke / fire flow objects:
- Apply inflow at every subframe (new: also emit during adaptive steps in between frames)
- Fix issue with fire not being emitted on first frame
- Higher value range for smoke flow density variable
MSVC does not have -march=native, so the kernel gets built without AVX2 and
BVH8 support. The code assumed it to be available and crashed
Differential Revision: https://developer.blender.org/D6082
This fixes the issue where sun shadowmaps needs a very big bias value to
make any difference.
The bias is now in world space and not dependant on shadow bounds.
Unfortunatelly this breaks compatibility with previous version and old
scene are likely to need user intervention to fix.
Also fixes the property range.
Fix T71661 EEVEE shadow from sun on incorrect face
Library data-blocks are supposed to be tagged as 'real user', i.e.
have one virtual user, since nothing else actually uses (refcounts)
them. That was done in liblink code, but not for newly added ID-LI IDs
when linking from a new libblend file e.g.
The current "Select Linked" operator works based on mouse position and
makes no sense to call from the menus and was removed in rBdd9dfadaac9b.
This patch adds an operator independent from mouse position that just
selects all keys to a corresponding point (and adds back menu entries,
adds keymap entry).
The original operator is renamed to 'select_linked_pick' internally
(this is now more in line to how "Select Linked" works for meshes,
curves etc)
Differential Revision: https://developer.blender.org/D6823
This panel is not for 2D paint, IMAGEPAINT_PROJECT_LAYER_CLONE is only
ever used in projection painting, not 2D painting.
Add a proper poll for this.
Maniphest Tasks: T73774
Differential Revision: https://developer.blender.org/D6836
Regression in aa919f3e82
Remove character margins, it complicated drawing & picking
to have one margin in pixels and a second margin in characters.
Replace this with an outer pixel-margin for drawing background colors.
MSVC has a conformance mode (/permissive-) where the C++ standard is more strictly
enforced. This mode is available on MSVC 15.5+ [1]
This patch enables this mode on compilers that support it and cleans up the few violations it threw up in the process.
- Mantaflow was using M_PI without requesting them using the _USE_MATH_DEFINES define to opt in to non default behaviour.
- Collada did not include the right header for std::cerr, this seemingly was fixed for other platforms already but put inside a platform guard.
- Ghost had some scoping issues regarding uninitialized variables and goto behaviour
Second landing of this patch, earlier commit was reverted due to some compiler configurations having slipped though testing
[1] https://docs.microsoft.com/en-us/cpp/build/reference/permissive-standards-conformance
Differential Revision: https://developer.blender.org/D6824
Reviewed By: brecht
This allows for more flexibility in Compositing compared to the
hardcoded alpha-over that is currently used.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6829
The introduction of python instancing for ID data in 2.80 completely
broke the 'smart & efficient' hack of using a same py object as key for
initial quick check, since rebuilding the RNAPointer in the
BPy_StructRNA would actually affect the py instance of the first ID used
to generate that py object...
TL;DR: No need for this complex and unclear optimization anymore, since
we do not actually rebuild a whole py object anymore every time we call
`pyrna_id_CreatePyObject()` from a same ID pointer.
Using a struct here allows to change given parameters to the callbacks
without having to edit all callbacks functions, which is always noisy
and time consuming.
15% to 20% improvement in cloth simulation performance with
self-collision.
The idea is to reduce the number of collisions computed by avoiding
overlapping tris with the same combination (eg. (1,0) and (0,1)).
Reviewed By: zeddb
Differential Revision: https://developer.blender.org/D6474
This partially reverts commit 5314161491.
Conflicts with Emulate "Middle Mouse Button".
This feature should be accessible under all supported configurations.
MSVC has a conformance mode (/permissive-) where the C++ standard is more strictly
enforced. This mode is available on MSVC 15.5+ [1]
This patch enables this mode on compilers that support it and cleans up the few violations it threw up in the process.
- Mantaflow was using M_PI without requesting them using the _USE_MATH_DEFINES define to opt in to non default behaviour.
- Collada did not include the right header for std::cerr, this seemingly was fixed for other platforms already but put inside a platform guard.
- Ghost had some scoping issues regarding uninitialized variables and goto behaviour
[1] https://docs.microsoft.com/en-us/cpp/build/reference/permissive-standards-conformance
Differential Revision: https://developer.blender.org/D6824
Reviewed By: brecht
The operator in its current state is based on mouse position and doesnt
make sense to be called from a menu.
(In fact it should be called 'select_linked_pick' internally and a
separate 'select_linked' should be implemented similar to how "Select
Linked" works for meshes, curves etc -- see D6823 for this)
Differential Revision: https://developer.blender.org/D6822
color
Selection and grooming only ever happens on hair keys (vertices), so
makes sense to use that theme color.
Sidenote: `CacheEditrPathsIterData` and `PTCacheEdit` have `sel_col` and
`nosel_col`, these can go, will do in a separate commit.
Maniphest Tasks: T68788
Differential Revision: https://developer.blender.org/D6725
Compared to 2.79, this also has the benefit of actually showing the curve
again if you set both bevel start and end to 0.0 for example.
Maniphest Tasks: T59271
Differential Revision: https://developer.blender.org/D6168
The option can still be modified in the bone settings in the properties
editor. In the future a correct menu entry (using an enum) can be
added back. For that, an operator like `wm.context_collection_boolean_set`
could be added for enums.
This reduces code duplication between the CUDA and OptiX device implementations: The CUDA device
class is now split into declaration and definition (similar to the OpenCL device) and the OptiX device
class implements that and only overrides the functions it actually has to change, while using the CUDA
implementation for everything else.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6814
Adds the invert vgroup mask option to the Vertex Weight modifiers.
These 3 modifiers share the same functions so they needed to be modified at the same time. They are all setup the same with the invert vgroup option being added. I had to add a flag to the Mix modifier but the others I use the existing flags.
Differential Revision: https://developer.blender.org/D6819
Provide different options for locking and unlocking vertex groups
using bone selection, accessible via a pie menu triggered via the
'K' hotkey. To implement a variety of operations, extend the old
operator with a new option to mask it by bone selection. If the
X Mirror option is enabled, selection is automatically mirrored.
This follows D6533 as the next step in improving accessibility of
vertex group locking during weight painting.
Differential Revision: https://developer.blender.org/D6618
There is a bug where the UVWarp modifier will stop working if an armature bone is set as the Bone To target and then later changed to a non armature object without clearing the Bone To string property. The modifier will still think it is needing a bone matrix and not properly use the object matrix.
A simple fix by adding a check for the object being an armature as well as the bonename string being set.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D6809
There were to copies of stdosl.h one from stock OSL
and one in the cycles tree augmented with cycles
specific closures.
moved the cycles ones to stdcycles.h and copied
the stock stdosl.h and accompanying headers from
the OSL shader folder.
for further details see D6812.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6812
This enables an extra layer of control in the sculpt brushes.
For now it is enabled only in Scrape, but it should work in all brushes (like normal radius). In the future it may also be enabled in other brushes.
You can tweak in this property in the scrape brush to achieve a much better behavior when working on curve surfaces and control how much volume you want to trim. In most cases, it also fixes the bug where the brush keeps trimming in the same area without disabling accumulate.
It should be possible to fix some other artifacts in other brushes by tweaking this default property.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D5993
This patch allow to change the brush tip shape between a square and a
circle using a brush property.
After this change we are no longer testing the distance against a cube
(the Z axis is not used). I did not test this in depth, but if it does
not produce any artifacts I think we can keep it this way instead of
adding more complexity to the code.
In this new distance test the brush falloff is only applied on the
rounded parts of the square to avoid sharp artifacts in the
diagonals. Because of this, the round version is much softer than
the square one. The planned hardness property will fix this, but
this can also be avoided by setting the fallof to a custom curve.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6165
The IK chain was using an anchor point by default as it makes sense for
posing, but for creating curved shapes it is useful to be able to
disable it.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6584
This brush simulates deforming clay with your fingers, accumulating
material during the stroke. It has a plane that tilts during the stroke
in the front part of the brush to achieve this effect.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6238
The OptiX denoiser can be a great help when rendering in the viewport, since it is really fast
and needs few samples to produce convincing results. This patch therefore adds support for
using any Cycles denoiser in the viewport also (but only the OptiX one is selectable because
the NLM one is too slow to be usable currently). It also adds support for denoising on a
different device than rendering (so one can e.g. render with the CPU but denoise with OptiX).
Reviewed By: #cycles, brecht
Differential Revision: https://developer.blender.org/D6554
The code was using brush->alpha directly, so the alpha value from
UnifiedPaintSettings was not used when eneabled.
Reviewed By: brecht
Maniphest Tasks: T73656
Differential Revision: https://developer.blender.org/D6804
* Missing close dialog displayed to warn about unsaved changes.
* No reaction when the file was opened on a different desktop.
Differential Revision: https://developer.blender.org/D6765
ss->multires is set in sculpt_update_object, which is not called just
after disabling dyntopo, so it needs to be checked before running
reshapeFromCCG
Reviewed By: campbellbarton, brecht
Maniphest Tasks: T73706
Differential Revision: https://developer.blender.org/D6801
The channel color squares are no longer positioned under the visibility
icon, since contrast is poor. Instead they are thinner and drawn on the
left side, before the visibility icon. If the curve is hidden, the color
gets less opaque.
Differential Revision: https://developer.blender.org/D5882
This is an oversight of a fix for T69834, where I didn't realize the
ED_object_editmode_exit_ex() function is called for all objects as an
opposite of only the ones which were in edit mode.
Seems a simple fix: just move tag into a check that object was in the
edit mode prior to tag.
Differential Revision: https://developer.blender.org/D6808
Blender can crash while rendering, when scene data is changed from within
a `frame_change_pre` or `frame_change_post` callback function. This results
in bug reports like T60094, T67627, and T73530. Until this is properly
resolved, this limitation should be documented.
No functional changes.
While the file in this report had corrupted values,
this is avoidable without adding any extra overhead.
Use unsigned vertex group indices since we don't need negative values,
this is an alternative to checking they aren't negative in many places.
Vertex group values over INT_MAX is still considered invalid,
so any accidental unsigned wrapping won't be silently ignored.
This reverts commit 394b48029c.
Leaving this here does not affect performance in any significant way and it may be useful in the future.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6688
In some situations the symmetry point may be behind the camera, so the
projection is inverted and it looks wrong. This avoids drawing points in
screen space when they are behind the camera.
Reviewed By: jbakker
Maniphest Tasks: T72690
Differential Revision: https://developer.blender.org/D6487
This forces the full geometry when that overlay is enabled.
I would rather not support this and leave that bug as a know issues/
limitation because this is terrible for performance and people may not
be aware that by enabling the option they are disabling the
optimization.
Reviewed By: jbakker
Maniphest Tasks: T66349
Differential Revision: https://developer.blender.org/D6552
Even though we do not have much of those, this might change in the
future, and in any case having specific functions for this ID type in
generic `BKE_lib` area was really confusing.
The issue here is simple, IMA_SRC_TILED was missing from a check for whether the image should
be saved.
Note that tiled images won't be automatically saved if they have never been saved before.
For single images this is handled by packing them, but packing of tiled images isn't
supported yet.
However, in that case the file closing dialog will at least show a warning now instead of
completely ignoring tiled images.
Having functions defined in `BKE_lib_id.h` implemented into
`lib_remap.c` was confusing at best.
Besides trivial code splitting and header includes cleanup, had to add a
new `lib_intern.h` header for callbacks used by both remapping and
deletion code.
This commit adds the download, extract, patch, build, and install of the
Universal Scene Description (USD) library to the `install_deps.sh`
script.
Reviewed By: mont29, LazyDodo
Differential Revision: https://developer.blender.org/D6478
The changes come from the `functions` branch, where I'm using
these structures a lot.
This also includes a new `BLI::Optional<T>` type, which is similar
to `std::Optional<T>` which can be used when Blender starts using
C++17.
Make the Graph Editor Cursor panel fit in and use the split layout.
Also removed the snap buttons, since they were only a subset of the snapping possibilities, all of which are in Key > Snap anyway, and also in the context menu.
Update the theme to use correct hierarchy progression like in other editors.
Differential Revision: https://developer.blender.org/D6785
Reviewed by Brecht van Lommel
Don't use BKE_view_layer_context_active_PLACEHOLDER which is marked
as "never use this".
In fact, it isn't needed to lookup for camera in the tracking function
at all: camera object is always explicitly passed to it.
The user has preference to select the center point for alignment.
But in this case, it was not available for selection.
Also prioritizes selection of the middle point over the handles.
Reviewed By: #user_interface, brecht
Differential Revision: https://developer.blender.org/D6780
Was happening on macOS. The reason of this is because OpenImageIO
depends on boost, so it is to be passed to the linker after the
OpenImageIO libraries.
The layout was somewhat poor - hard to see what relates to the custom object, and also weirdly we show the Wireframe toggle above the Custom Object control, even though it can only be active if a bone has a custom object set.
Instead, I grouped everything in a Custom Shape sub-panel and used greying out.
Differential Revision: https://developer.blender.org/D6789
Reviewed by Brecht van Lommel
Patch adds an "Handle" option to the `SEQUENCER_OT_box_select` operator,
that allows to select the handles instead of whole strips.
Feature is mapped to Alt key modifier
A difference from the proposed design in T70730 is that covering the entire strip with the box actually selects both handles.
Reviewed By: iss
Differential Revision: https://developer.blender.org/D6372
Fluid guiding functionality was broken in the bake / read cache loop in fluid.c. Committing this to the release branch as otherwise fluid guiding would not have worked as expected (i.e. not at all).
Previously any of the named views could not have any roll,
this commit supports roll as long as it's axis-aligned (90,180,270 deg).
This is useful for snapping to views,
an improvement on cebd025e02.
Previously the MSVC environment was setup every time using vcvarsall.bat
when you ran you ran rebuild.cmd, Generally not an issue but after many
rebuilds on the same console, it grows the path environment variable
beyond what is supported and building breaks.
This patch adds a check to see if the environment is setup already
and skips the call to vcvarsall.bat
Also cleans up the double build in the msbuild's version of rebuild.cmd
install.vcxproj will build all that is needed, so no need to do a regular
build first.
oidn puts dllexport on all its functions causing the
blender binary to export these symbols.
this patch fixes this unwanted behaviour.
Differential Revision: https://developer.blender.org/D6647
Reviewers: brecht , sergey
This makes the code more consitent with the rest of blender
The `fractions_threshold` was changed to be active than enabled which is
also more consistent. This needs to be changed in other areas also.
libxml puts dllexport on all its functions causing the
blender binary to export these symbols.
this patch fixes this unwanted behaviour.
Differential Revision: https://developer.blender.org/D6646
Reviewers: brecht , sergey
Freeetype 2.9.1 tags dllexport on most of its functions so these
are now exported from the blender binary. (Same issue as D6563
which fixed it for USD)
Issue has already been fixed upstream so a simple version bump
fixes it.
This patch bumps freetype to 2.10.1
Differential Revision: https://developer.blender.org/D6645
Reviewers: brecht , sergey
OSL 1.10.9 fixes osl-bug 866 [1] which is long standing issue
on windows where paths get un-escaped and osl breaks when you
install it to for instance c:\blender-tests\new-boolean
This patch bumps osl to 1.10.9, and since osl is llvm's
only consumer, llvm/clang were bumped 9.0.1
Removed some of the patches that were no longer needed
Builds and passes all tests on windows and linux
[1] https://github.com/imageworks/OpenShadingLanguage/issues/866
Differential Revision: https://developer.blender.org/D6744
Reviewers: brecht
This works on selected_editable_objects, so no active object mandatory.
After deletion of the active object and using slection tools such as
e.g. box select, the lack of an active object would prevent this
operator from being called without good reason.
Also cannot think of any other existing poll that would really make
sense (Editor type, ...).
ref T68975
Maniphest Tasks: T68975
Differential Revision: https://developer.blender.org/D6773
This turns error condition checks into precondition checks, grouping the
non-error functionality together towards the bottom of the function and
error-handling functionality towards the top.
No functional changes.
This is not 100% a bug but a design change. The old method used the object origin as pivot point for Scale a nd Rotation, so when you moved the stroke in edit mode, the whole array ittems where offset because the pivot point distance changed.
Now, before applying scale and rotation, the stroke is moved to object origin to keep the offset when scale or rotate, so these transformations are done in stroke local space.
Glew.obj is one of the more expensive targets we have to build clocking in
at 34.907 seconds.
The root cause [1] is the msvc inliner is not super thrilled with the
glewIsSupported supported function, this patch changes the buildflags
of extern_glew to optimize for size rather than speed.
Given glew is only in play at initalization time there will be no
performance impact.
Time to build glew.obj
Before: 34.907s
After : 1.961s
[1] https://developercommunity.visualstudio.com/content/problem/732941/slow-compilation-of-glewc-for-visual-studio-2019-x.html
Differential Revision: https://developer.blender.org/D6656
Reviewers: brecht, sergey, fclem
Adding USD to a lite build fails to build due to boost errors, when you turn
boost on and rebuild still boost errors, boost was silently turned off since
it was not deemed needed. Once boost was forced on, it still fails due to TBB
being off.
This patch fixes:
- The Silent disabling of boost
- Add a check that USD is is not on before doing that
- move the TBB checks to a central location rather than the individual platform files
- Add USD to the TBB checks.
Differential Revision: https://developer.blender.org/D6479
Reviewers: brecht, sybren
Code was originally added to test a different approach to calculate the
irradiance buffer. The approach was just to slow so we never used it.
This change will remove it from the code base
Constraint stack similarly to modifier stack is fully operate on what
have been given to it, without requesting original or evaluated IDs.
Validness of datablocks passed to constraint stack are to be handled
on dependency graph/evaluation stream levels.
Mainly affects for() loops.
The reason why loop parameter was declared outside of the loop roots
back to the times when not all compilers supported C99.
This file was originally a placeholder for all the old functions that
have not yet been ported to the new draw system. Over time all the
functions that needed refactor were gone, and the functions here are
still needed.
While moving the functions around I removed dead code and made sure the
existent comments start with a capital letter and end with a full stop.
bf_intern_mantaflow lacked the `-DOPENVDB_STATICLIB` define
causing it to dynamically import openvdb, linked against
our static libs a happy time was not had by the linker.
- Move handling of private ID data (nodetree and master_collection)
under generic ID code. This shortens code a bit, but mostly avoids having
to modify all type-specific callback functions if/when we have to add
generic processing to IDs there.
- Seriously factorize `expand_xxx` area, in the same way we were already
doing in `direct_link_xxx` and `lib_link_xxx` areas.
Note that this actually also fixes some bugs (at least, potential ones),
like e.g. missing call to expand_id() for our beloved 'private ID'
(nodetrees & co), in current master code...
Differential Revision: https://developer.blender.org/D6764
Cache files are currently loaded via the Manta Python API. With very big caches this can slow down the viewport playback. Especially smoke simulations, which just load grids and no meshes, can suffer from this. This fix solves this problem by directly loading the cache files from disk (no Python). This fix has been in the works for some time. The developer of this patch is ready to handle any potential fall-out of this patch quickly.
Keyframes and channels were not updating immediately (you had to enter
channel and main regions with the mouse to force a redraw).
Differential Revision: https://developer.blender.org/D6762
Adds the invert vertex group option to the smooth modifier.
Setup same way as previous modifiers.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D6745
Adds the invert vertex group option to the Curve modifier.
Adds a short flag and char pad to the Curve modifier DNA. Passes the flag into the curve_deform_verts function as the weight values are found there and not in the modifiers .c file.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D6746
If the linked or append grease pencil object was added to the scene, the original file could have the datablock status in a different mode, so it's necessary to be sure is in object mode.
Differential Revision: https://developer.blender.org/D6759
Adds the invert vertex group option to the Lattice modifier.
Adds a short flag and modifies the existing char padding for the correct amount.
Adds a .invert_vgroup to the LatticeDeformUserdata.
Passes the flag into the lattice_deform_verts function where the weights around found and used.
For the other calls of lattice_deform_verts function they pass in NULL for the flag in the same way they pass NULL for the vgroup name.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D6747
Not sure when this happened but apparently the lower bar is now windows 7 [1]
This patch bumps to API version to 0x0601 (Win7) and cleans up any uses that
worked around the globally set API version.
[1] https://www.blender.org/download/requirements/
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6758
To determine the albedo pass, Cycles currently follows the path until a predominantly
diffuse-ish material is hit and then takes the albedo there.
This works fine for normal mirrors, but as it completely ignores the color of the bounces
before that diffuse-ish material, it also means that any textures that are applied to the
specular-ish BSDFs won't affect the albedo pass at all.
Therefore, this patch changes that behaviour so that Cycles also keeps track of the
throughput of all specular-ish closures along the path so far and includes that in
the albedo pass.
This fixes part of the issue described in T73043. However, since it has an effect on the
albedo pass in most scenes, it could cause cause regressions, which is why I'm uploading
it as a patch instead of just committing as a fix.
Differential Revision: https://developer.blender.org/D6640
Apparently the compiled shader bump into some register limit and
the compiler instead of giving an error, does something incorrectly.
Differential Revision: https://developer.blender.org/D6759
When an edge loop is fully occluded the direction of movement
is not calculated resulting in unpredictable behavior.
So always calculate the direction of the groups of edge loops
but continue preventing occluded edges from affecting `mval_dir`
(global) value.
Differential Revision: https://developer.blender.org/D5247
The current edge slide is executed in this sequence:
- traverses all edges to find the ones selected,
- traverses each vertex of the selected edges,
- traverses each linked edge of the vertex to finally execute the code.
However the list of vertices that are part of selected edges are already
stored in `EdgeSlideData` through the `TransDataEdgeSlideVert *sv;` member.
Therefore, the code can be simplified as follows:
- traverses all `sv` in `EdgeSlideData`,
- get the `sv->v` vertex to finally execute the code.
Differential Revision: https://developer.blender.org/D5277
Liblink specific ID type function was so far running a loop over all IDs
of relevant type, unlike almost any other 'ID-callback-like' functions
in Blender, which usually let the looping controll to calling code.
The latter approach is more convinient when one want to add generic
(i.e. type-agnostic) code, since it typically only has to change code in
one place (caller function) instead of tens of places (all the callback
functions).
This commit also changes/sanitizes a few things that had nothing to do
in main liblink code, like mesh conversion from tessfaces to polys
(which can be done in after-linking versionning code), or scenes' cycles
detection/check regarding background 'set' scenes.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6727
In current `readfile.c` code we have that:
https://developer.blender.org/diffusion/B/browse/master/source/blender/blenloader/intern/readfile.c$3523
This is unconditionally clearing nodetree's recalc flags, and was added by rB81a762e79f83 ages ago. Thing is, in main ID read code we only clear that flag when **not** in undo context.
This proposed change intends to properly handle those cases, by moving `id.recalc` flags clearing from `read_libblock()` to `direct_link_id()`, which is also called for all 'local' IDs (ntrees and master collections currently).
I’d expect that change to be straightforward (and maybe even fixing some odd undocumented bugs), however there is no .blend file testcases associated with changes in rB81a762e79f83, so wouldn’t mind that to be double checked before it goes to master.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6711
Reduce the number of possible locations used to find libraries,
to simplify troubleshooting.
Only keep '*_ROOT_DIR' and the path used by 'install_deps.sh'.
The baking progress bar now uses the entire notification space in the UI. Before, old reports could still be visible when a bake job got started. This had the disadvantage that those message got frozen too with the bake UI freeze.
BKE_nurb_type_convert now takes r_err_msg and is more specific in the
error message...
ref T71672.
Maniphest Tasks: T71672
Differential Revision: https://developer.blender.org/D6275
Addons option
This removes the 'use_owner' option feature from rB61c8ed40f5df.
(this wasnt working well when addons are enabled and when switching
workspaces)
Now Addon filtering is just bypassed for Import/Export menus.
(by introducing/setting bl_owner_use_filter = False)
Maniphest Tasks: T58842
Differential Revision: https://developer.blender.org/D6740
WM_modalkeymap_operator_items_to_string() wasnt checking
WM_keymap_active(), so it was possible that e.g. when using the Industry
Compatible keymap, the shortcut from the Blender keymap was shown.
This also fixes the (now exposed) bug that the Industry Compatible keymap
would not have a ADD_CUT_CLOSED kmi defined for the Knife Tool [mandatory
for the status bar].
Maniphest Tasks: T67084
Differential Revision: https://developer.blender.org/D6748
The code removed was left there from an early prototype and it was not
doing anything.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6741
The conservative depth shader is ~4.5x slower than the normal one as it
uses geometry shader and fragment shader discard.
This patch also includes a hack to also fix the view parallel planar
geometry and the really small wire objects.
For some reason, the conservative raster fix does not work with normal
selection but does with box select.
This is a fix for T63356.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D6714
Lacunarity parameter determines scaling of subsequent octaves in fractal
noises. For example, Noise node have this scaling hardcoded to 2.0. Each
octave have twice bigger scale than previous one, resulting in finer details.
By design fractal noises that generate octaves with same seed should not
have Lacunarity set to 1.0, since then it just stacks up identical noises.
Differential Revision: https://developer.blender.org/D6742
This is a small optimization that makes sure the adaptive domain only considers active inflow objects. Ones with disabled fluid flow are skipped and thus the adaptive domain will not try to cover them.
An educated guess to put ensure order of static libraries initialization.
A bit weird, since OpenImageDenoise should be depending on TBB, but that
is likely being ensured by bf_compositor.
Linking succeeded on my Intel machine, and blenloader_test was passing
when doing manual test on buildbot.
The erase mode has an option to change the erase mode from soft/hard/stroke.
However, there are 4 brush types: hard/soft/point/stroke. Hard and Soft here are similar (they are both "soft" erase mode) only having different strengths.
The erase mode should be soft (Maybe this should be renamed to something more generic like "fade"), point, stroke.
Reviewed By: #user_interface, #grease_pencil, billreynish, antoniov
Differential Revision: https://developer.blender.org/D6733
From looking into builder's logs it seems that stamp file is picked
up prior to actual archive: sometimes worker reports missing archive
file, from a code path which is only possible if there is a stamp file.
Could be something with IO scheduling where bigger file is sent to
Samba server after smaller file.
Hopefully with this change this will not happen anymore.
When using duplicate linked meshes, objects that are not in edit-mode will be drawn as
it is in edit mode, when another object with the same mesh is in edit mode.
This will not be the case when one of the objects are influenced by modifiers. The change
reflects more how it was done in Blender 2.79.
The current change introduces a draw manager method that checks in detail who is responsible
for the drawing (render engine or overlay engine). If the edit mesh is not the original or
the object that is drawn doesn't draw the original mesh the object will be drawn by the render
engine.
Known Limitation of this patch is that the rendering outside edit mode doesn't reflect the
latest changes until the user switches between object and edit mode. When there are no
modifiers in use, the updating is done immediately.
IMO this would be sufficient for blender 2.82, it also fixes parts of T72733.
The updating of the surface batches requires more development and is
post-poned for now.
Reviewed By: fclem, brecht
Differential Revision: https://developer.blender.org/D6737
Added sanity check in the flow / obstacle object loops that check if the modifier data is valid. Ideally this should not be needed. However, in remove_particle_systems_from_object() the fluid modifier can get freed. It is not yet clear whether the modifier free call is really needed or not.
Font duplicator was not outputing dupli-objects using evaluated object
pointers, leading to crash because original object are not supposed to
be drawable.
This moves the backface culling to the fragment shader to avoid all the
limitations of the current system. This has a cost but it is unlikely that
bone drawing will be a bottleneck.
Usual issue from those dear Bone pointers in pose data...
Note that this is more like minimal-risk, quick fix, it's nothing like
'nice to have' code. Think proper solution would be to refactor handling
of those kind of 'caches' to ensure they are valid/up-to-date in a much
easier way, at the very least.
Ideal solution being to get fully rid of those horrors, of course, but
let's not dream here. ;)
Adds the invert vertex weights option to the Warp Modifier. Setup in the same way as the other modifiers.
Uses the existing flag char that is labeled unused.
Differential Revision: https://developer.blender.org/D6720
Clicking and dragging (aka tweaking) an unselected item should select
it, deselect others and translate. After rB395dfff103e1, it would not
deselect others anymore.
Adds the invert vertex weights option to the Displace modifier.
Adds a flag and char padding to the Displace modifier DNA for the invert group boolean.
Differential Revision: https://developer.blender.org/D6686
The function `gpu_texture_create_tile_array` checked for a valid
tile ibuf when determining the packing location. During the actual packaging it didn't.
As the tiles are already ignored when selecting the packing location, we
can also ignore it when copying it to the glTexture. Therefore this
patch removes the existing BLI_assert and replaces it with a NULL check.
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D6738
Currently the UI for Symmetrize is confusing, for a few reasons:
- It exists as a sub-panel to the Dyntopo panel, even though it doesn't require Dyntopo to work
- It is inside a panel called Remesh, which is confusing because we now have a different Remesh panel
Changes:
- Put the Symmetrize controls in the Symmetry panel
- Rename Optimize to Rebuild BVH and move to the Sculpt menu
- Change the poll function - apparently it doesn't require Dyntopo
Differential Revision: https://developer.blender.org/D6735
Reviewed by Pablo Dobarro
Improvements to keyboard shortcuts shown in menus, mostly for Macs.
Differential Revision: https://developer.blender.org/D6730
Reviewed by Brecht Van Lommel
Using ellipsis character for line continuation since that glpyh is now narrower.
Differential Revision: https://developer.blender.org/D6728
Reviewed by Brecht Van Lommel
The function `modifiers_disable_subsurf_temporary` disables
temporarily only subsurf modifiers with the `On Cage` option enabled.
But a modifier can act on cage even with this option disabled.
Differential Revision: https://developer.blender.org/D6722
This meant a non-active selected object would be skipped based on the
mode last used, mostly an issue with 'Lock Object Modes' disabled.
Other transform operators (such as snap) don't do this.
Partially reverts b8aff06466
Font binaries updated with consistent keyboard symbols. Footer events now have per-platform icons.
Differential Revision: https://developer.blender.org/D6055
Reviewed by Brecht Van Lommel
Specifically, this happened when automatically hiding and showing of the
menu bar and dock was enabled in the system preferences.
Differential Revision: https://developer.blender.org/D6710
Some code was removed to avoid storing the combined pass when viewport
rendering other passes. But we can keep this by default, Blender overrides
the list of passes entirely.
- New bespoke icon for the universal brush toggles
- New icon for Redirected Folder (currently unused)
- New icons for handle types (Auto Clamped, Auto, Aligned, Vector, Free)
- New icons for Sequencer Text Strip anchor (Top, Bottom, Left, Right, Centre)
Thanks to Andrzej Ambroż for the new icons
Pixar recently released USD 20.02 [1]. I think it's important for people
to be able to figure out which version of the USD library is used in
Blender.
[1] https://github.com/PixarAnimationStudios/USD/releases/tag/v20.02
This commit exposes the USD library information via `bpy.app.usd`, and
includes that info in the `system-info.txt` saved via Help → Save System
Info.
Reviewed by: brecht
Differential Revision: https://developer.blender.org/D6724
Preset tracking settings is missing a comma here.
Without a comma this will result in an implicit string concatenation.
This was probably not wanted.
Reviewed By: sergey, Blendify
Differential Revision: https://developer.blender.org/D6717
Needed to protect against a case where clamp overlap limited
the offset to approximately zero, and the snap-to-pipe code
would therefore encounter an almost degenerate profile and
fail in matrix inversion.
It changes name to be blender-<version>-linux64.
Since CentOS is used as a base host for builds there is no real need
in specifying libc version. Is unlikely anything older could be used
anyway.
Also make bitness to be the same as windows. It is something what
users will read easier.
This patch fixes {T73051}. The cause of the issue was the absence of
relations in the depsgraph between IK solvers of overlapping IK chains.
Reviewed By: sergey, brecht
Differential Revision: https://developer.blender.org/D6700
Dont act on a base which cannot be found in the viewlayer.
Oversight in rB41858a73111d.
Maniphest Tasks: T73499
Differential Revision: https://developer.blender.org/D6721
- Remove the only_render arg from ED_editors_flush_edits
was only used in one place, the '_ex' version can be used instead.
- Split out the single object version of this function as currently
flushing is being done in-line, often only accounting for edit-mode,
ignoring sculpt mode for e.g.
Only Metaballs are left unsupported.
However, the implementation does not match 100% with cycles which converts
all objects to meshes.
Fixes T63424 EEVEE: Normal map node doesn't works with curve objects
This commit cleans up the flow emission code (i.e. the code that determines where flow is generated). It also addresses an issue with initial velocities.
Related issues (that might be fixed through this commit) are: T73422, T72949
Fluid domains with (auto-generated) particle systems were set to wireframe drawtype automatically. This was a convenience feature that made particles visible immediately. As the auto switching is sometimes a bit annoying though this has been removed. Instead, the Quick Liquid Operator switches the viewport shading type to wireframe.
- Initial velocities are no longer influenced by surface distance value.
- Added optimizations for different flow types (e.g. skip part of loop for liquid flow objects).
- Comments style cleanup and removed old todos.
This code is currently not in use and so removing it based on the YAGNI principle. If there really is need for a high-res emission loop it could be easily added again. However, I believe for the smoke noise it is sufficient to upscale the base emission map. A high-res emission map can easily be achieved by increasing the base resolution. Note also that in the new fluid system base loop and noise loop are decoupled making the need for a high-res emission loop even more unneccessary.
Code cleanup. Fixes a mismatch between definition and declaration of fsmenu_insert_entry().
Differential Revision: https://developer.blender.org/D6712
Reviewed by Julian Eisel
Changes to Info Editor making it easier to read. Only visual changes, no functional changes.
Differential Revision: https://developer.blender.org/D6491
Reviewed by Julian Eisel
This fixes the crash with pose_ik_segments = 0 in old files.
Some files were saved with the property set to 0, so the versioning code
won't work in that cases. I also changed that to fix the crash in those
files.
Reviewed By: brecht
Maniphest Tasks: T73054
Differential Revision: https://developer.blender.org/D6663
Tool system handlers had higher priority than the overlayed animation
"regions" (fake regions in fact). Give animation (and View2D) handlers
priority over toolsystem handlers.
Gizmo's still have higher priority, but I'll leave that unless there's a
reason to change.
More concretly, the crash would happen if a filebrowser is opened while
an error popup is visisble **in a different window**.
Code assumed the popup to be in the active window/screen, but it may
actually be displayed in a non-active window. Temporarily override
context to ensure this assumption is correct.
In blender 2.79 you could use a render result as a camera background
image. This is useful during layout/compositing. During Blender 2.80
development there were 2 issues introduced that removed this feature.
* to receive a render result the image required a lock. This lock wasn't passed and therefore no image was read from the result. Generating an GPUTexture from an Blender image also didn't do the locking.
* the iuser->scene field wasn't set what is required for render results.
This change adds an optional `ibuf` parameter to `GPU_texture_from_blender` that can be passed when available.
Reviewed By: fclem, brecht
Differential Revision: https://developer.blender.org/D6684
We have the problem that it's very hard to see which animation channels are selected. This is a very small tweak to make it more obvious, using the same text highlight color as the Outliner.
Really it should be overhauled to be more exactly like the Outliner, but this is just a quick fix to make it reasonably visible.
Differential Revision: https://developer.blender.org/D6708
Reviewed by Julian Eisel
Need to also offset markers in BKE_sequence_base_shuffle_time().
Also clarify/correct related comments.
Maniphest Tasks: T73014
Differential Revision: https://developer.blender.org/D6555
taking proportional size into account
Transform would always move all keyframes (e.g even when Proportional
size is 0.0).
'calculatePropRatio()' was setting td->factor correctly, but this was
not being considered in 'applyTimeTranslateValue()' if there was no
action [which greasepencil and masks do not have].
Maniphest Tasks: T55622
Differential Revision: https://developer.blender.org/D6697
What I removed here used to be needed in an earlier version of the
patch, to avoid use-after-frees. This is not the case anymore, so it
seems we can remove this.
Generally the context region code is very weak and inconsistent. If
things were done properly, the line I added shouldn't cause issues -
it's logically correct.
Also fixes T73475.
button in the Image slot in the Brush panel
Caused/exposed by rBaf9ca138ba7b
Also relevant was rB828905190e12
Above commits moved the WM_UI_HANDLER_BREAK around so it would not be
returned anymore.
We need WM_UI_HANDLER_BREAK, otherwise we wont get through to to
KM_RELEASE. There are two places that explicitly check for KM_RELEASE
(call to `ui_do_but_extra_operator_icon` in both
`ui_do_but_SEARCH_UNLINK` / `ui_do_button`), and without the above we
only ever get here with KM_PRESS.
This patch restores the behavior regarding WM_UI_HANDLER_BREAK to what
is was before the two culprit commits.
Checked that both this report (T72089) and T69755 are working.
Maniphest Tasks: T72089
Differential Revision: https://developer.blender.org/D6363
Since changing the active particle system uses NC_OBJECT | ND_DRAW
for 'RNA_def_property_update()' we need to redraw/refresh
BCONTEXT_PARTICLE in 'buttons_area_listener()' as well.
Maniphest Tasks: T67654
Differential Revision: https://developer.blender.org/D6702
Since we can now use separate icons for the items in the File Browser
lists, the following rounds out the "System" list for Linux.
Adds a few more folders that are available in most distributions
at installation, but only if they exist.
Try to never do operation twice and try to use MADD operations. Even if this
is very unlikely to make any difference, it can help compilers do some
optimization. I did not measure any difference as probes have much higher
impact on render time because of texture lookups.
Note that disk light is currently the most expensive light type so it
does not hurt to micro optimize.
Enable and Disable Edit Menu items based on whether those actions are currently applicable.
https://developer.blender.org/D4846
Reviewed by Brecht Van Lommel
This was due to the fact the drawing code was expecting the editpoints
to be equaly spaced. Reuse the code in particle.c to output the select
mask in red color channel of the particle (which is unused in new code).
This dependency was removed in fd0bc7e002,
as there already were dependencies ANIMATION -> PARAMETERS and
PARAMETERS -> CACHE, making ANIMATION -> CACHE unnecessary.
Upon subsequent inspection, the ANIMATION -> PARAMETERS dependency was
there due to the fallback behaviour in
`RNANodeQuery::construct_node_identifier()`. Now this is no longer
relied upon, and the required relation is made explicit again.
To issues caused this:
* The code to launch the filebrowser from a button didn't respect popup
menus stored in context
* There was actually no popup menu region stored in context for this
case. Doing so *may* introduce other issues, but the way I did things
already fixes all issues I've found.
Instead of changing the modifiers behavior, we make sure to always use
the data->totcol instead of the ob->totcol. Also we centralize getting
this number to avoid future issues.
Fix T72593 Blender crashes when separating mesh
Fix T72017 Crash on set visibility change
Not fully fixing it for now since I do not see an easy way to remove freed
pointer from libmap, and it does not seem to be an actual, practical
issue currently, but eeek...
In a minimal render engine blender crashes as it cannot create a preview
of the material yet. This patch adds a failsafe test for this specific
scenario.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6633
This was a missing notification because of wrong type. Also remove
the id tag as the changes are still picked up by workbench and does not
affect geometry or the particle system directly.
A big rework of the code now uses exact predicates for orientation
and incircle. Also switched the main algorithm to use a faster
divide and conquer algorithm, which is possible with the exact
predicates.
This changes the GL_TEXTURE_MIN_FILTER parameter from GL_LINEAR_MIPMAP_LINEAR
to GL_LINEAR_MIPMAP_NEAREST. It gives a sharper result, since with these
settings only down scaling is used.
Differential Revision: https://developer.blender.org/D6662
The NLA Editor sidebar is currently out of step with the rest of Blender, and in particular the Sequencer, which offers similar features and functionality. This patch makes a number of UI layout changes to make it fit in.
- Remove Active Track panel, since the track names can just be edited in the source list on the left
- Rejiggered the categories to be more understandable. 'Strip' includes settings for the current strip, and 'Edited Action' includes settings for the action that is currently being edited
- Use single column split layout
- Use name + mute toggle configuration like in the Sequencer
- Fix an issue with the theme, where the sidebar background was too dark, breaking the bright -> dark hierarchical logic
- Use sub-panels for animated strip properties controls
Differential Revision: https://developer.blender.org/D6687
Reviewed by Brecht van Lommel
This is done with two-finger double tap on trackpads, and is usually used to
zoom into an element under the cursor.
It can now be used for toggling local view in the 3D viewport.
Differential Revision: https://developer.blender.org/D6588
Now it shows "Macintosh HD" instead of "/", and a different icon for
removable and network drives.
Differential Revision: https://developer.blender.org/D6683
This is a step towards Wayland and headless rendering support, using EGL
instead of GLX. The EGL backend is not enabled by default, it can be tested
using WITH_GL_EGL=ON.
Differential Revision: https://developer.blender.org/D6585
This 'fixes' T68554: 'API mathutils.geometry.tessellate_polygon returns
bad results sometimes' by documenting the limitations of the current
implementation.
I've also added a unit test for the function, so that any change in this
behaviour will get noticed.
No functional changes.
Adds the Invert Vertex Group weight option to the Cast modifier.
Uses the same setup as similar modifiers invert weight.
Adds a boolean invert property next to the vertex group string in the modifier
and subtracts the current vertex weight from 1.0f if it is turned on.
Differential Revision: https://developer.blender.org/D6671
Minor modifications by @mont29.
While the behavior of this shortcut can be argued (it only works while
hovering the possibly invisible markers region), it was not my intention
to remove it entierly from the Graph and Sequencer Editor. Only wanted
to copy it.
Mistake in 6a49161c8c, the tool-header region was not created when
creating a new VSE editor (as opposed to an existing one in some
workspace).
There was also no way to get the tool-header to show in such cases.
Logic to open menus on hover changed since 2.7x for convenience
switching between popovers in the top-bar.
This also made hover open menus in situations where it isn't useful.
Restrict this to buttons placed side-by-side.
This implements a better heuristic for identifying if cloth or hair is
being dealt with (checking hairdata, instead of primitive_num).
The issue was caused by a change in primitive counting in rBd42a7bbd6ea5
I'm also adding some safeguards to avoid ever computing pressure for
hair. This shouldn't really be necessary, but it's good to be sure.
When building with precompiled libraries on Linux, CMake used boost libs
from the system outside the lib dir. This restricts CMake to use only the
libraries from the precompiled libraries.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D6659
Remove entries for the transform tools, since this is no longer necessary after recent changes. The default keymap entries are simply used instead, since the MMB is now added automatically.
Profile calculation now happens in a single pass rather than being spread
throughout the process. This means each profile will only be calculated a
single time.
Reviewed By: howardt
Differential Revision: https://developer.blender.org/D6658
Changes the default View3D mouse cursor to the OS-supplied arrow pointer. Subsequent cursor changes will now be set per-tool instead.
Differential Revision: https://developer.blender.org/D6485
Reviewed by Campbell Barton
The dependency graph has to know whether a driver must be re-evaluated
every frame due to a dependency on the current frame number. For python
drivers it was using a heuristic based on searching for certain sub-
strings in the expression, notably including '('.
When the expression is actually evaluated using Python, this can't be
easily improved; however if the Simple Expression evaluator is used,
this check can be done precisely by accessing the parsed data.
Differential Revision: https://developer.blender.org/D6624
The full name was "Topology Slide/Relax", but it didn't fit in the
toolbar UI. This was causing some problems:
- The mesh filter that does the same thing is called "Relax"
- We may want to add a "Topology Brush" tool in the future that is more
oriented to retopology task (like creating strips of quads), so by doing
this we avoid having two tools with the same name in the UI.
Reviewed By: billreynish
Differential Revision: https://developer.blender.org/D6590
This patch applies the original object scale to the coordinates of the
extracted mask mesh. Without this patch, the mesh was no taking the
original object scale into account and the shrinkwrap will fail.
The other solution would be copying the objecty scale to the new
extracted mask object, but I would like to avoid entering sculpt mode
with scaled objects as it may produce wrong behaviors in some tools.
Reviewed By: jbakker
Maniphest Tasks: T71373
Differential Revision: https://developer.blender.org/D6207
The 2D paint cursor in the 3D view does not support scene radius in
weight and vertex paint mode. This was also the case in 2.80 with the
old cursor. The option to change the units from view to scene is not
available in the UI in those modes, so I think it makes sense to remove
the support from the code.
The ideal solution could be supporting the new cursor in all paint
modes, but that is going to take more time and it is going to be
problematic in texture paint. After doing this, we can bring this code
back and add the option to change the units to the UI.
Reviewed By: jbakker
Maniphest Tasks: T73080
Differential Revision: https://developer.blender.org/D6586
It was printing "frame" time instead of FPS.
Other interesting thing to get solved is to solve "drop" in FPS
when there is an idle time in user input.
Current usecase is limited to observing FPS when there is a continuous
stream of events: for example, keep moving vertex in edit mode while
watching debug prints.
Boost could have picked up system-wide libbz2-dev installed and enable
this compression in iostreams. Nothing really wrong with this, but it
makes it so final Blender binary depends on bz2, which breaks default
linker flags.
This commit makes it so Boost is not using libraries which we don't
need, simplifying linking setup.
Differential Revision: https://developer.blender.org/D6668
The FPS here is measured based on a timestamp from when depsgraph
was previously evaluated.
Allows to ease investigating performance improvements/regressions
which are not related on animation system but on modifications on
a single frame (such as transforming vertex in edit mode).
Was caused by recent refactor of dependencies in 517870a4a1.
While there is no fully reliable solution to this issue other than
making TBB a dynamic library dependency (as documentation tells us
to do), there seems to be simple workaround which doesn't require
deeper changed in build process and packaging.
Tested on Brecht's computer who managed to reproduce the issue on
Linux (T72015#857423).
When there are ID properties on an object, and these are animated and
used by a driver, the depsgraph has proper connections between ACTION →
ID PROPERTY → DRIVER.
When these properties are defined on a mesh, however, the depsgraph
relations are incorrectly created between GEOMETRY → PROPERTIES_EXIT →
DRIVER (because it's assumed that 'source = ENTRY' implies 'geometry').
This patch solves this by first checking whether the targeted property
is an ID property and handling it accordingly. This also made it
possible to remove some special cases from pose bone relations.
Maniphest Tasks: T73001
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D6571
`RNA_property_pointer_set()` was just broken when assigning to an ID
pointer IDProp, on both debug/checks and actual assignment.
That was at least affecting RNA copying and liboverrides area...
even when target is not a collection
Looks like this was (accidentally) removed in {rBbe9e469ead22}
https://developer.blender.org/
rBbe9e469ead227aee8d4c29b98a125cf599c5c8bb#change-pFg0VUTAHY2q
This could also result in a missing update in
object_handle_update_proxy, see T72083 for an example.
Thx @Macroni investigating!
Maniphest Tasks: T72083
Differential Revision: https://developer.blender.org/D6651
This is a more correct fix to the issue Brecht was fixing in D6600.
While the fix in that patch worked fine for linking it broke ASAN
runtime under some circumstances.
For example, `make full debug developer` would compile, but trying
to start blender will cause assert failure in ASAN (related on check
that ASAN is not running already).
Top-level idea: leave it to CMake to keep track of dependency graph.
The root of the issue comes to the fact that target like "blender" is
configured to use a lot of static libraries coming from Blender sources
and to use external static libraries. There is nothing which ensures
order between blender's and external libraries. Only order of blender
libraries is guaranteed.
It was possible that due to a cycle or other circumstances some of
blender libraries would have been passed to linker after libraries
it uses, causing linker errors.
For example, this order will likely fail:
libbf_blenfont.a libfreetype6.a libbf_blenfont.a
This change makes it so blender libraries are explicitly provided
their dependencies to an external libraries, which allows CMake to
ensure they are always linked against them.
General rule here: if bf_foo depends on an external library it is
to be provided to LIBS for bf_foo.
For example, if bf_blenkernel depends on opensubdiv then LIBS in
blenkernel's CMakeLists.txt is to include OPENSUBDIB_LIBRARIES.
The change is made based on searching for used include folders
such as OPENSUBDIV_INCLUDE_DIRS and adding corresponding libraries
to LIBS ion that CMakeLists.txt. Transitive dependencies are not
simplified by this approach, but I am not aware of any downside of
this: CMake should be smart enough to simplify them on its side.
And even if not, this shouldn't affect linking time.
Benefit of not relying on transitive dependencies is that build
system is more robust towards future changes. For example, if
bf_intern_opensubiv is no longer depends on OPENSUBDIV_LIBRARIES
and all such code is moved to bf_blenkernel this will not break
linking.
The not-so-trivial part is change to blender_add_lib (and its
version in Cycles). The complexity is caused by libraries being
provided as a single list argument which doesn't allow to use
different release and debug libraries on Windows. The idea is:
- Have every library prefixed as "optimized" or "debug" if
separation is needed (non-prefixed libraries will be considered
"generic").
- Loop through libraries passed to function and do simple parsing
which will look for "optimized" and "debug" words and specify
following library to corresponding category.
This isn't something particularly great. Alternative would be to
use target_link_libraries() directly, which sounds like more code
but which is more explicit and allows to have more flexibility
and control comparing to wrapper approach.
Tested the following configurations on Linux, macOS and Windows:
- make full debug developer
- make full release developer
- make lite debug developer
- make lite release developer
NOTE: Linux libraries needs to be compiled with D6641 applied,
otherwise, depending on configuration, it's possible to run into
duplicated zlib symbols error.
Differential Revision: https://developer.blender.org/D6642
We compile zlib as own dependency, but are not informing BLOSC
to use it. This leads to zlib symbols defined twice when linking
Blender: one set comes from libz.a and another one from libblosc.a.
Tested on Linux Debian testing and CentOS 7.5.
It is possible that this change on its own will lead to linking
errors after libraries are re-compiled, This will be fixed as
a dedicated fix to Blender's build system.
Reviewed By: brecht, mont29, LazyDodo
Differential Revision: https://developer.blender.org/D6641
The problem was related to the smooth of the strength. As the factor was very low and the value was smoothed , the result was almost nothing when the radius was very small. Now the factor is higher and the smooth is done after clamping pressure.
This adds some kind of dashing to the tube and cone limits. Although the
dashing is in object space and is not a good as old dashing. But it is
the least time consuming and least complex solution.
- Register toggle is in the Text menu
- Run Script and Refresh OSL become an icon buttons next to ID block
Differential Revision: https://developer.blender.org/D5686
Reviewed by Campbell Barton
The operator always expect to be called form a button.
But this is not always the case.
This does not bring functional changes when not called from python.
This commit will prevent the crash. It does produce a result that may not
be desirable (only briding one face of the cube), but at least it's better
than crashing.
`posix_memalign` requires the `alignment` to be at least `sizeof(void *)`.
Previously, `MEM_mallocN_aligned` would simply return `NULL` if a too small
`alignment` was used. This was an OS specific issue.
The solution is to use a minimal alignment of `8` for all aligned allocations.
The unit tests have been extended to test more possible alignments (some
of which were broken before).
Reviewers: brecht
Differential Revision: https://developer.blender.org/D6660
Currently, the Info Editor default theme settings aren't consistent with other areas such as the Outliner. This change makes it fit in more by using the same default values for things like the background and selected elements.
Differential Revision: https://developer.blender.org/D6496
Reviewed by Pablo Vazquez
In our animation editors, we have a feature called View Frame. Problem is, it is not self evident what this feature does. Does it show frame numbers? Does it show all frames? Does it frame the view? Does it frame the view?
What this does, is it moves the view to where the playhead is. With clearer naming, we can communicate this much more clearly.
This is just a simple patch that changes the name from 'View Frame' -> 'Go to Current Frame'.
Differential Revision: https://developer.blender.org/D6437
In the brush properties, some masking-related controls are currently available as a sub-panel in the Options panel, while others are in the Mask panel. I want to generally lessen the amount of controls in generic 'options' panels, since it's non-descriptive and rather a rather random grab bag of various controls. Better to group things in terms of their functionality with descriptive names.
This change consolidates the masking-related controls under one panel.
Differential Revision: https://developer.blender.org/D6577
Reviewers: Pablo Dobarro, Julien Kaspar
The contents of the Rotation panel was already disabled when a bake
exists, but the checkbox in the header wasn't. Since rotations are part
of the baked data, it doesn't make sense to enable/disable rotations
after baking.
As pointed out by user @Peter Fog (tintwotin):
The current name for this property is wrong for two reasons:
- Because it makes incorrect use of the term 'window' (in Blender these are called 'editors')
- 'Lock Time' is incorrect, because it has nothing to do with locking the time at all. In Blender, the time is already locked and always the same across editors, no matter what. This property only syncs the visible range, which is something quite different.
For this reason, this is changed to 'Sync Visible Range' instead. I also added a tooltip, which was completely missing.
This patch also adds this property to the Sequencer, where it was missing.
Differential Revision: https://developer.blender.org/D6632
Reviewed by Julian Eisel
Changes the icon used for 'duplicate into new window' to a new one created for this purpose.
Differential Revision: https://developer.blender.org/D6463
Reviewed by Julian Eisel
Fixes the invisible scrollbar when opening preferences by 'Editor Type' by always creating scrollbars for V2D_COMMONVIEW_PANELS_UI objects.
This removes a fix (T47047) for dpi issues when dragging out the toolbox. The new toolbox in 2.8 does not seem to have the same DPI issues.
Exact steps for others to reproduce scrollbar invisible (T69413):
change the 3d viewport to preferences and go to addons. The scrollbar will not be visible
To verify there are no DPI issues:
Apply the patch and open blender. Hide the toolbar. Split the 3d view port into 4 windows, such that one is very small horizontally, another is very small vertically, and a third is small in both directions. Drag out the toolbar arrow on all four viewports. The Toolbar will be the same size in each. For further verification, adjust the scaling and repeat.
{F7805968}
Also this is my first time submitting a patch. Some instruction is welcome!
Reviewed By: #user_interface, Severin
Maniphest Tasks: T69413
Differential Revision: https://developer.blender.org/D6050
This commit belongs to T72894. It's related to (my) previous commits on pointer exchanges (today + yesterday). It cleans up the functions by describing their usage in the comments, adds additional nullptr checks, and fixes the reference count responsibilities of newly created PyObjects.
I also changed the Collada importer scuh that the diffuse Alpha is now set
for the generated PBSDF Shader AND for the base color.
Note: we can not export the base color AND the color
from the PBSDF Shaders at the same time. And when importing
we do not know if the color was originally coming from a base
material or from a shader. Setting them both in import seems
to give the most consistent results.
I'm still not entirely sure what was going on - I know that the execute
region didn't get initialized correctly, but doing that at a later point
didn't fix the issue. Apparently forcing the header region to
re-initialize does fix it, even though I was sure this was redundant.
Also fixes a memory leak in UI code after preferences were opened.
This function is a very special refresh function just for floating
regions. _initialize is more consistent with ED_area_initialize() so use
that too.
Also adds assert.
The OptiX SRT motion expects a motion defined by translation,
rotation, shear and scale, but the matrix decomposition code in
Cycles was not able to extract shear information and instead
produced a stretch matrix with the information baked in. This
caused conflicting transforms between traversal and shading
and lead to render artifacts.
This patch changes the matrix decomposition to produce factors
inline with what OptiX expects to fix that.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6605
Add toolbar to sequencer regions.
A bit of refactoring has to be done in RNA space.
Currently there is only cut tool implemented to serve as template for
anybody who would like to add more.
Importers/exporters should show the sidebar by default (if they have
any settings). For some reason this was missing for the Alembic and
Collada exporters.
Over-lines are used in other large files (keymaps for e.g),
using this add-hoc convention for sections make it easier to
configure editors to jump between them (as I have locally).
Waveform is freed in `sound_load_audio()` when sound length is `queried by BKE_sound_info_get()`.
Add argument free_waveform, so `BKE_sound_info_get()` can skip waveform freeing, as it is not expected to alter sound.
Reviewed By: sybren
Differential Revision: http://developer.blender.org/D6053
Add Adjust Last Operation panel to Sequencer.
`OPTYPE_REGISTER` was removed form some operators and few properties were hidden
So they don't show up on the panel
Author: a.monti
Reviewed By: ISS
Differential Revision: http://developer.blender.org/D6210
Refactor code to use `eSpaceSeq_Proxy_RenderSize` or corresponding `IMB_Proxy_Size`
enum items directly.
`SEQ_PROXY_RENDER_SIZE_100` has assigned value 99 to distinguish from `SEQ_PROXY_RENDER_SIZE_FULL`.
This caused error in image size calculation and because of that image had to be scaled.
Author: EitanSomething
Reviewed By: ISS
Differential Revision: http://developer.blender.org/D6368
Sometimes on flat open vertices the thickness would suddenly start
to be jumping in powers of 2, also when bending a plane there is a
noticeable jump in the geometry.
When offset is set to -1 or 1 weird glitches happen.
See D6559 for test cases that failed.
Some modifiers (like particle system, but also some other physics
simulations) require extra steps besides creating the modifier itself,
so had to switch to higher-level `ED_object_modifier_add()` to add
inserted modifiers in an overriding object data-block.
Due to how particle modifier handles copying, some extra nasty
hacks/work-around were also needed to get it working.
This data is only used to get current time/frame value, which is never
mandatory to add a modifier.
Needed by incoming fix to support particles modifiers in liboverrides.
Sometimes on flat open vertices the thickness would suddenly start
to be jumping in powers of 2, also when bending a plane there is a
noticeable jump in the geometry.
When offset is set to -1 or 1 weird glitches happen.
See D6559 for test cases that failed.
The `give_parvert()` function was only considering the mesh's original
vertex indices when the parent vertex index was valid for the evaluated
mesh. However, when using the Mask modifier the evaluated mesh can have
less vertices but still have the parent vertex.
Since the `if (nr < numVertex)` condition wasn't used to prevent any
out-of-bounds access, and seems just an incorrect optimisation, it could
be removed.
Even though we build USD as static, it still feels the need to mark its
symbols with declspec(dllexport) which means the blender binary now exports
these symbols.
this patch fixes that unwanted behaviour, however USD libs still need to
rebuild before this becomes visible in the blender binary
Differential Revision: https://developer.blender.org/D6563
Reviewed By: sybren
The USD landing broke building with clang on windows
due to a couple of reasons:
1) Some incompatibilities in their headers [1] only one
of them was important for us and is included in our patchset
now.
2) clangs lld wanted the full path to the libusd_b library
when using the whole archive link option, while msvc can
figure it out from just the library name.
Tested with clang/msvc and msbuild and ninja generators
[1] https://github.com/PixarAnimationStudios/USD/issues/1030
When using the color picker on a image editor it tries to read the color
from the original image. When there is no original image the code
crashes during the determination of the UDIM tile number.
There are 2 approaches to solve this.
1. Modify `BKE_image_get_tile_from_pos` to support NULL pointers.
2. Modify `ED_space_image_color_sample` with an early exit.
This patch modifies `ED_space_image_color_sample` with an early exit.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6629
Panel alignment was only updated when panel size changed. Now we can
also recognize changes in the category tabs offset and tag panels
for alignment updates.
Previously the window manager would receive the GHOST event and then query the
latest tablet data from the window to go along with it. If multiple events were
queued, it would then use too new tablet data for handling older events.
Fixes T62565: tablet pressure not working on macOS with some devices
Removing meaningless distinction between NULL pointer and EVT_TABLET_NONE,
and initialize pressure and tilt to 1.0 and 0.0 respectively when no tablet
is used.
There were two strange things going on:
- Start frame was clamped to 1, even when frame 0 is always a valid number.
This also ignored the 'Allow Negative Frames' user preference.
- Start frame was only clamped when setting the end frame, so first setting
the end frame and then the start frame would result in a different result
than doing it in the opposite order.
This commit fixes both issues by:
- Clamping the lower bound of the start frame only if negative frames are
not allowed, and
- apply that clamp both when setting the start and the end frame.
FreeStyle line styles were not part of the dependency graph, and
blacklisted from the Copy-on-Write system. As a result, animated
FreeStyle properties would not be updated by the animation system,
resulting in T72213. There was an explicit call to run the animation
system on the original datablocks, but that was (for good reasons)
removed in D5394.
This commit adds the FreeStyleLineStyle datablocks to the dependency
graph and allows them to be handled by the CoW system. As a result
- the UI now updates properly when properties are animated, and
- animated property values are actually used when rendering.
This commit includes @Sergey's patch P1222, which unifies two bits of
code that did the same thing: check whether datablock type is covered by
copy-on-write.
Reviewed By: sergey, brecht
Differential Revision: https://developer.blender.org/D6609
Related to T62882
When the SupportsMapping modifier flag was added to the dynamic paint
modifier it was added commented out. It may have not worked back then,
but it seems to work fine now.
MOD_weightvgedit.c was already updated similarly.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6072
Similar to the Microfacet Closures, the Principled BSDF Sheen closure is
added at a high weight but typically results in fairly low values.
Therefore, the default weight is a bad indicator of importance.
The fix here is the same as it was back then for Microfacets:
Compute an average weight using the normal as the half-vector
and use it to scale down the sample weight and the albedo channel.
In addition to drastically improving denoising of materials with
sheen when using the new Denoising node, this also can reduce noise
on such materials considerably.
This would happen if a tile is found on disk, painting would actually
request that tile (because corresponding uvs were in that range), but
that tile was not added in blenders list of tiles in that Image.
Need to also check tile in `image_quick_test` (regardless of iuser
having passed).
thx @lukasstockner97 for additional input!
Maniphest Tasks: T73110
Differential Revision: https://developer.blender.org/D6578
selection
False positive when a sequences end would be the same as active
sequences start.
Also thx @sybren for the heads up to make this more readable.
Maniphest Tasks: T72546
Differential Revision: https://developer.blender.org/D6451
I doubt we can do much better. Most of the aliasing comes from the edge
detection which does not use a lot of samples. We could use more samples
but then the detection becomes way more complex and expensive.
The second issue comes from the reconstruction (AA pass) that only bleed
adjacent pixels in if their line direction is perpendicular to the offset.
This makes corner gaps on certain diagonals.
Thanks @mano-wii for providing the patch!
The original code assumed that when `animation_player_preset` was not
`CUSTOM`, the `animation_player` path would be empty. This is a bad
assumption, as it can be quite useful to be able to toggle between a custom
and a built-in player. As such, `animation_player` should not be reset to
an empty string when a non-custom player is chosen.
'Straight Cut' is actually documented as creating N-Gons. However, the
code was disallowing this. This is probably a mix-up as the "allow N-Gons"
option is documented as a "force quad/tri" option.
There is already code for this, it just wasn't working. Now add the
slash after checking for an empty string.
Differential Revision: https://developer.blender.org/D6568
The gflags library was not fully configured to be built as a static
library, only one of two files was changed.
Differential Revision: https://developer.blender.org/D6611
This aligns with the VFX reference platform 2020 along with the decision
to stick to Python 3.7, see T68774.
Blosc was downgraded to 1.5 as recommended by the OpenVDB documentation.
IlmBase and OpenEXR are now built together with CMake rather separately
using autoconf.
Differential Revision: https://developer.blender.org/D6593
We can't use the fast path when the mesh is used by mulitple objects and so
slower sculpting is expected then. But fake users should not affect this. This
also fixes the same type of error in a few other areas.
Cache file loading for mesh and particle files now works through the direct update_structures functions. The final cache mode now also only bakes the most essential files and is therefore not resumable anymore.
When computing the roll value coming from the handle bone, the code
was using some strange unexplained math. It probably works fine when
the difference with the 'zero roll' orientation is pure twist, like
is the case when called from mat3_to_vec_roll. However, it appears
to break when significant swing is involved.
The issue is fixed by using the proper Swing+Twist decomposition
utility function that was added in a recent version for drivers.
This improves performance by reducing the amount of false positives.
A self overlap is made, so the distance from the vertices in the
overlap nodes is actually added.
This patch suppress the OSL warnings resulted from ambiguous calls
to the normalize function. This is done by casting to the vector
type before normalizing.
Reviewed By: Brecht
Differential Revision: https://developer.blender.org/D6621
Blender supports locking vertex groups to prevent changes to the
weights. However, as mentioned in comments for D3837, it is hard
to use this because there is no interface for locking in 3D View.
This adds a red shade to bones that are associated with a locked
weight group during weight paint mode, as the first step to adding
such interface. The next step is adding a pie menu for lock/unlock.
Differential Revision: https://developer.blender.org/D6533
Once again, am not exactly sure why that was working before, and not
anymore - but in any case, doing that kind of update here is not only
useless (since we have to do it at the end of the whole
collections/objects duplication and remapping anyway), it is also rather
dangerous, as collections are currently in rather invalid states at that
point of the code...
Note that in ideal world, `BKE_main_collection_sync()` & co would be
lazy (setting only a flag, then code actually needing this to be valid
again should call some sort of `BKE_main_collection_sync_ensure()`).
Then we would not have to worry about such things (and we'd get nice
performance improvements in some cases, also in main remapping code,
etc.).
Food for some refactoring, some day...
Simplify a bit, and remove some now redundant remappings.
As a side note, rBac723db57fd8ba5 actually also fixed some unreported
issues (missing remappings to new objects/collections in new copied
scene, that were not previously handled by the 'custom' code).
There are almost certainly still some missing remappings around,
though...
rBac723db57fd8ba5 makes proper remapping of all pointers in Scene...
including the object pointers of bases in ViewLayers.
Using `BKE_main_collection_sync_remap()` makes sense here anyway
(compared to `BKE_main_collection_sync()`, it additionally clears caches
in ViewLayers and Collections), this whole code makes a lot of
remapping.
Note that I do not really understand *why* that was working OK
before rBac723db57fd8ba5. I.E. *why* not remapping at all ViewLayers'
base object pointers seemed to be OK...
This whole collection/viewlayer caching is very hard to follow, and
really needs a full rework at some point (just as much as ID copying
code in general, and scene copying code in particular, in fact).
Both actual Collection datablocks and the horrible master collection
should share the same code (there were already some differences,
although probably not critical, but some callbacks from
scene->master_collection did not have the 'not self' flag...).
### Description of the problem
Until now, it is only possible to correctly add a lightprobe in python via an operator:
`bpy.ops.object.lightprobe_add()`
### Description of the proposed solution
The idea of this patch is to fix the lack of consistency lightprobe creation without operator.
It allow creation of different lightprobe type directly via `bpy.data.lightprobes.new(name, type)` (such as for curves).
In order to make it possible I had to:
1. Add a function `BKE_lightprobe_configure` in charge of lightprobe settings configuration (avoid code redundancy)
2. Allow an object to take lightprobe datablock as data during is initialization.
### A short example of this patch usage
```
lp = bpy.data.lightprobes.new('some_name','PLANAR')
bpy.data.objects.new('toto', lp)
```
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6396
There were some visual artifacts when the spin gizmo had a rotation
greater than 360 degrees.
Avoids this by drawing the arc over the span of one rotation only
and adjusting the background color based on the rotation count.
This way we remove the need for the srgb boolean uniform and a lot of code complexity. However, mesh update is going to be a bit slower.
I did not benchmark the performance impact.
This also fix a typo in draw_cache_impl_particles.c and fix hair not using vertex color in workbench.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6610
This will make this consistent with the behaviour of other start/end
ranges in blender. So start/end will instead be adjusted to always
satisfy the "start >= end" requirement instead of clamping the values.
EEVEE Soft shadows were not rendered correctly during viewport
rendering. The reason for this is that during viewport rendering the
shadow buffers were only update once and not per sample. This resulted
that all the samples calculated the same shadow.
This fix moves the call to `EEVEE_shadows_update` from cache finished to
draw scene. This needs to happen before `EEVEE_lightprobes_refresh`.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6538
There is a cornercase when the user edits an uvmap, that is not part of
the material (yet). When this is the case the uvmap was not added to the
uv buffer and the 'pos' alias was not created.
This change will always request the active uv map when uv editing.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6534
Even though we build USD as static, it still feels the need to mark its
symbols with declspec(dllexport) which means the blender binary now exports
these symbols.
this patch fixes that unwanted behaviour, however USD libs still need to
rebuild before this becomes visible in the blender binary
Differential Revision: https://developer.blender.org/D6563
Reviewed By: sybren
Embree's local intersection routine was not prepared
for local intersections without per-object BVH.
Now it should be able to handle any kind of local
intersection, such as AO, bevel and SSS.
Differential Revision: https://developer.blender.org/D6602
UI
Seems like we need to set the error with the evaluated ModifierData.
Pass this to 'surfacedeformBind' and report with that.
Differential Revision: https://developer.blender.org/D6601
This integrates hair collisions with the new cloth collision system,
greatly improving reliability, and reducing the amount of hair-specific
code paths in the cloth code.
The removes all the point constraint based collision stuff, instead
implementing segment impulse based collisions, using the same collision
response code as the normal cloth solver.
The hair system can now also collide with the emitter if it is a
collision object.
Reviewed By: mano-wii, Sebastian Parborg
Differential Revision: https://developer.blender.org/D6545
This avoids the problem where Blender doesn't start because
the PYTHONPATH points to an incompatible Python version,
see T72807.
Previously we chose to assume people who set the PYTHONPATH know what
they're doing, however users may have set this for non Blender projects.
So it's not obvious that this is the cause of Blender not to launch
on their system.
To use Python's environment vars, pass the argument:
--python-use-system-env
Note that this only impacts Python run-time environment variables
documented in `python --help`, Access from `os.environ` remains.
Old pre 2.5 files may have had non active spaces stored that doen't have
a header. The 2.5 versioning only added headers for active spaces, not
inactive (so invisible) ones.
Newer versioning code assumed there to always be a header though.
Inserted a version patch to make sure there's always a header now.
Fixes error reported to Debian,
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=949035.
The last handle wasn't corrected, also, there is no reason
to flip the handles while sorting (checking the same handles many times)
move this into it's own loop.
It's not certain this fixes the issue since I can't reproduce the crash, but
the code was wrong in any case.
Thanks to Ray Molenkamp and Anonymous for finding this.
`ARegion.alignment` unfortunately is a mixture of value and bitflag
enumerations. When checking for left/right/top/bottom region alignment,
the flags have to be masked out usually.
Most of the fixed cases here probably didn't cause issues in practice,
but could in fact break at any point when surrounding logic changes.
In fact the assert in #region_visible_rect_calc() failed in an older
file from https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=949035. This
fixes it.
Outliner tree building code was not handling properly empty libraries
(i.e. Lib datablocks in our bmain which have no used actual data
anymore).
Main issue here is unclean states of indirect hierarchies of linking
involving several libraries after undo operation.
This is not a critical issue though, just annoying and untidy.
Just some rewording of the documentation of `Particle.uv_on_emitter()`,
so that it no longer refers to 'derived mesh' but 'evaluated mesh', and
document that it expects a modifier from an evaluated object.
No functional changes.
The floating "Move" redo panel showed transform values with less
precision than in other places (e.g. sidebar and properties editor).
With Millimeters as unit it would even round to full integers, which
may be an issue since you typically work at higher precisions with this
unit.
Note that this only applies to the visual precision, internally we use
full floating point `float`s still.
Fixes T70367.
Previously the button would only show up in the status-bar located in
the same window that had the screen with the animation timer.
I don't see a reason not to show the button in all status-bars instead,
other animation feedback is also displayed in all windows.
Fixes T72194.
Based on @fclem's suggestion in D6421, this commit implements support for
storing all tiles of a UDIM texture in a single 2D array texture on the GPU.
Previously, Eevee was binding one OpenGL texture per tile, quickly running
into hardware limits with nontrivial UDIM texture sets.
Workbench meanwhile had no UDIM support at all, as reusing the per-tile
approach would require splitting the mesh by tile as well as texture.
With this commit, both Workbench as well as Eevee now support huge numbers
of tiles, with the eventual limits being GPU memory and ultimately
GL_MAX_ARRAY_TEXTURE_LAYERS, which tends to be in the 1000s on modern GPUs.
Initially my plan was to have one array texture per unique size, but managing
the different textures and keeping everything consistent ended up being way
too complex.
Therefore, we now use a simpler version that allocates a texture that
is large enough to fit the largest tile and then packs all tiles into as many
layers as necessary.
As a result, each UDIM texture only binds two textures (one for the actual
images, one for metadata) regardless of how many tiles are used.
Note that this rolls back per-tile GPUTextures, meaning that we again have
per-Image GPUTextures like we did before the original UDIM commit,
but now with four instead of two types.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6456
Not sure how the WorkSpaceLayout.screen pointer could end up being NULL,
but apparently that happens, or at least happened with older files.
Rather than just adding NULL-checks, prefer not keeping around those
invalid layouts at all.
It was too easy to end up with invalid region rectangles and we were
badly protected against them, so that they were hard to catch.
In fact we still create a main region for the top-bar, which ended up
getting a region height of -1. While this doesn't seem to have caused
issues in practice, we should prevent them entirely.
So idea was that at the end of region layout resolving,
`BLI_rcti_is_valid()` should return `true` for the region rectangle.
Further changes here ensure this is true: The `RGN_FLAG_TOO_SMALL` flag
is now set whenever there is not enough space for a region or if it
would get a size of zero or less.
Note: Should the assert fail, please do not just disable it and try to
actually address the root of the issue.
In Blender 2.80 Shift + H (`object_hide_view_set(unselected=True)`) used to
(temporarily) hide objects only if their collection was visible in the current
view layer.
This behavior was changed in rB0812949bbc3d7acfd1f20a47087ff973110aa177 (D5992)
by using `BASE_VISIBLE_DEPSGRAPH` for the decision which object's (temporary)
visibility should remain unchanged. Since the view layer visibility and depsgraph
visibility has been decoupled in said commit, the correct condition
to check is `BASE_VISIBLE_VIEWLAYER`.
This patch is a fix for T72302
Differential Revision: https://developer.blender.org/D6583
Seems that previous fix didn't work in all cases: Debian's build
environment didn't fully detect endianess, possibly due to typo,
possibly due to difference in various environments.
Using define magic from a more battle-tested project seems a safe
way to go.
There are more changes than just PPC since the upstream commit contains
full re-synchronization of all defines.
This commit updates numaapi to a latest library version from upstream.
rB4cde92303f3d made a MESH-only check (but that is no longer mandatory
since the Mesh is fetched by MOD_deform_mesh_eval_get instead of ctx-
>object->data now...). This would fail for projecting beveled curves
(resulting mesh missing), now also get the mesh for curves if we use
MOD_SHRINKWRAP_PROJECT (and only then).
Maniphest Tasks: T68489
Differential Revision: https://developer.blender.org/D6548
'Shift + S' is taken by toggeling Smooth Stroke in the keymap, should be
'Shift + Alt + S' (this also goes more in line with other editors, where
Alt is added to the shortcut used by 'Save' to do 'Save As')
Maniphest Tasks: T72803
Differential Revision: https://developer.blender.org/D6572
when using UDIMS
A more generic approach might be considered in the future (I assume
there are other operators around that need an update in shifting their
uvs) though.
Maniphest Tasks: T72648
Differential Revision: https://developer.blender.org/D6570
The Falloff property in the pose brush controls how much deformation
propagates through the ik chain, not by using the distance to the
vertices, so this option does not make sense (it does nothing in the
pose brush code and it disables the 3d paint cursor).
Reviewed By: jbakker
Maniphest Tasks: T73070
Differential Revision: https://developer.blender.org/D6574
When a node was partially/fully hidden, this was causing the mask flags
to update incorrectly because it was not checking all vertices, so they
were assigned the fully_masked state and not updating in the transform
tool and mesh filter.
Reviewed By: jbakker
Maniphest Tasks: T73094
Differential Revision: https://developer.blender.org/D6573
The PBVH usually is rebuild after a topology change, so it does not make
sense to keep the previous dynamic mesh preview vertex list. This may
cause a crash is the number of vertices of the new mesh (and preview) is
larger previous one. Now the list is deleted with the PBVH and a new one
will be generated using the new mesh when the cursor is updated.
Reviewed By: jbakker
Maniphest Tasks: T71712
Differential Revision: https://developer.blender.org/D6476
This add a basic sanity check that validates
the features we use from ffmpeg are actually
available
Differential Revision: https://developer.blender.org/D5999
Reviewed By: sybren
The USD landing broke building with clang on windows
due to a couple of reasons:
1) Some incompatibilities in their headers [1] only one
of them was important for us and is included in our patchset
now.
2) clangs lld wanted the full path to the libusd_b library
when using the whole archive link option, while msvc can
figure it out from just the library name.
Tested with clang/msvc and msbuild and ninja generators
[1] https://github.com/PixarAnimationStudios/USD/issues/1030
Simply loading factory settings and dragging an area separator
immediately after would cause an assert because of these invalid sizes.
Seems that since rB07499c04f612 we correctly initialize DPI related
UserPref values with 0, which caused DPI dependant initialization of
global areas to set ScrArea.global.size_min/max to 0 too.
Commit baeb11826b switched memory
allocation for the motion transform to use CUDA directly, instead of going
through abstractions. But no CUDA context was set active before those
were called, so the calls failed. This fixes that by binding a context beforehand.
The `do_versions_after_linking_280()` function was missing a placeholder
for the newly added versioning code. I copied the comments from the
`blo_do_versions_280()` function.
No functional changes.
During development of Blender 2.80 the `Object.hide` property was removed,
and later reintroduced in rB5e968a996a53 as `Object.hide_viewport`. Of
course there are some technical details missing in this summary, but this
is the view that's given in the 2.80 release notes.
FCurves on `Object.hide` weren't updated in versioning code, resulting in
the property no longer being animated. This commit corrects the RNA path
of such FCurves.
This might be useful in some places. Much of the code makes the implicit
assumption that the rectangle has valid coordinate order, good to make
it more explicit.
When splitting a Quad View by dragging a corner an quad area can become
negative size because of a one pixel offset to calculate the start of
the area.
This patch solves this to make sure that there are no negative areas. By
adapting the `ARegion.winrct`.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D6579
The original code had 0 as a magic number in the test whether the weight
belongs to a locked group, instead of comparing it to the actual group
number.
Thanks @mano-wii for providing the diff.
The Viewport Render Keyframes operator didn't include keyframes from
grease pencil animation or from mesh shape key animation (see T72861).
To find all related datablocks that could be considered as part of the
selected object, `BKE_library_foreach_ID_link(..., IDWALK_RECURSE)` is
used. To prevent relations like constraint targets from being visited,
the recursion is stopped when it finds a different object.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D6558
Never treat one of those horrorible 'IDs that are not real IDs' as
regular ID, and expect ID management code to do so. Unless there is a
very good reason, one should never explicitely pass those fake IDs to ID
management code directly.
In that specific case, user count is sort of 'disabled' in libquery
code, because master collections are not in bmain (`LIB_TAG_NO_MAIN`).
When sculpting and doing a image render the workbench used the sculpt
batch what is created by a different GPU context and would not show up.
In debug builds an assert for this case is checked. I rechecked all
`use_sculpt_pbvh` that it also checked if it was rendering. Only the
workbench deferred didn't do this for the default render mode.
With this change the user can render a workbench render directly from
sculpt mode.
Currently a curve's beveled geometry is built with duplicate geometry
along the seams between the "front," "back," etc, sections of the
curve. This builds them in one piece, resulting in smooth geometry.
Other than the duplicate geometry, the vertex positions are the same
as before.
Reviewed By: campbellbarton, mano-wii
Differential Revision: https://developer.blender.org/D6562
offset_meet creates offset lines that can't be directly intersected, so
the average of the points on each offset line is 'dropped' onto the
faces around the beveled vertex, which can depend on where
the loop starts.
This fix skips faces with the same normals as the "in plane" faces from
build_boundary.
Reviewed By: howardt
Differential Revision: https://developer.blender.org/D6521
The `poll_modal_item` was too restrictive.
`!validSnap(t)` already solves these cases, but for better readability
(and efficiency), I found it best to keep the `tsnap.mode` test.
This is because even if the glStencilMask is 0x00 the GL_DECR_WRAP and
GL_INCR_WRAP states still works and will modify the stencil.
Fix T73046 Overlapping parts of wireframes don't render at all in workench
with shadows turned on.
Patch from Habib Gahbiche (zazizizou) moves the "run operator and
compare mesh to a golden" paradigm used in bevel and boolean tests
into a general framework that separates the test specs from the
blend files. Then adds some other operator and modifier tests using
the new framework. Diff D5357.id20724.diff was applied.
New .blend files, modifiers.blend and operators.blend are needed
in the tests/modeling svn directory; those were separately committed.
When in sculptmode the wireframe coloring should always be disabled.
When an object was sculpted but had modifiers this was not detected and
the colors were still shown.
This fix will disable wireframe coloring for any object that is in
sculptmode.
Was caused by recent animation backup added to depsgraph as a part of
another bugfix.
This commit effectively disables the animation backup, restoring bug
related on handlers, but makes it possible to interact with objects
again.
Will re-iterate over handlers+animated properties.
It was possible to have object copy-on-write happening during
action's copy-on-write, which was causing access to a freed
memory from animation backup.
Solves crash reported in T73029.
Edge Index display were not showing up after performing
"Select Boundary Loops" when in face selection mode. The operation
tagged the mesh that the selection was changed, but in the end this
didn't do anything within the depsgraph.
The fix changes this to recalc the geometry of the object. What also
syncs the selectmode flags. A better solution would be to update the
select flags only. But that could be done as future work when we have a
performance problems.
Studiolights that were just created didn't had the
`STUDIOLIGHT_SPECULAR_HIGHLIGHT_PASS` flag. Without this flag the
studiolight the viewport didn't show the specular highlights and it
wasn't possible to switch the highlights on/off in the popover. After
reloading the studio lights this was possible.
This patch will always set the flag for any newly created, or being
edited studiolight, so the workbench render engine is fed with the right
data.
An optimisation in the collision system for cloth (static collisions),
broke the particle collisions, as they take motion into account. This
restores the moving BVH required for the particle collisions, while
keeping the optimisation for the cloth collisions.
Reviewed By: mano-wii
Maniphest Tasks: T71620
Differential Revision: https://developer.blender.org/D6560
Commit rB7e61e597253f3ca75f2fb86a57212ca750ffbbe8 broke viewport rendering when not displaying as halfs.
This fixes that by actually using the `scale` parameter that is passed into `film_map` and also de-duplicates code around it.
Differential Revision: https://developer.blender.org/D6557
The `optixAccelBuild` API throws an error when the property to get compacted size is passed in
without the `OPTIX_BUILD_FLAG_ALLOW_COMPACTION` flag set. This is not currently hit
because `background` is always true (set in `mem_alloc`), but would become an issue once that
is sorted out, so fixing it now to be safe.
OptiX always uses record-all behavior for transparent shadow rays, but did not check
whether the maximum number of hits exceeded the shadow hit stack. This fixes that.
- "Only Export Selected Objects" → "Selection Only", as this is the
standard used in other exporters.
- "Evaluation Mode" → "Use Settings for", as this is clearer for users
who aren't as familiar with the technical details of the depsgraph.
- "Use Instancing" → "Instancing", and moved the checkbox to the end of
the option list into its own box "Experimental". This looks a bit
cleaner than just plonking "EXPERIMENTAL" in the checkbox label.
This should only be used to change and recalculate region sizes in a DPI
independent way. To get the size with DPI applied, ARegion.winx/y should
be used instead.
Added note on this in comment.
When text drawing is disabled in the viewport the color of the sculpt
brh is set to the last used one. In th Light theme this is black what
makes it totally not visible.
This change will render the brush text using `TEXT_HI` as this is the
last one set when the text overlay is on.
The issue was caused by special handling of animation update after
manual edits in frame_post handler: to avid loss of manual edits
done on top of animated property. This was done as a separate pass
for non-animation update after frame_post did modifications.
This caused some other side-effect: non-modified animated property
was re-setting to the value which is used in the viewport.
Idea of this solution is simple: preserve values which came from
animation update through copy-on-write process. The actual process
of this is a bit involved: need to decode RNA path and do it twice
since f-curve might point to a sub-data which pointer will change.
Since this is only done for non-active depsgraph (aka depsgraph
used for render pipeline) this is probably fine since all this
extra overhead is just a fraction of overall render process.
Differential Revision: https://developer.blender.org/D6330
event_system.c has been collecting a lot of different functionality,
move generic query/access functions into their own file,
since these are used by operators and other parts of the windowing code
and aren't part of low level event handling.
Also move public last-property API to wm_operators.c.
Logic to convert double-click events into press events wasn't running
in the case an operator had a modal keymap, causing bevel for e.g.
to ignore keys pressed quickly.
Change event handling logic so modal handlers never
receive double click events, so checks for press/release are reliable.
While this is an old issue for mouse events in practice it wasn't
a problem since the first event typically executed/canceled.
Support for keyboard double-click exposed the problem
for all modal operators that take numeric input.
The exporter constructs an export hierarchy, and then traverses that
hierarchy from the root to the children. When an object is to be exported,
but its parent is not, it meant that this traversal from (great)parent to
children would skip these objects. This commit fixes that by inserting the
missing parents as 'transform only' into the hierarchy.
The way the USD exporter currently works, it is not possible to export
invisible objects. As such, the 'Visible Objects Only' option was
confusing.
Exporting invisible objects means obtaining invisible evaluated objects
from the depsgraph, which is not something that's currently implemented.
Once that's done, we can reintroduce this option.
This is in response to @brecht's remark in rBec62413f803e, where he
states that the approach was problematically interpreting the holdout
setting in a different way than what it was designed to do.
If we later want to add back a different "never include this in exports"
criterion, it can be easily done in
`AbstractHierarchyIterator::mark_as_weak_export()`. If such a criterion
should be file-format-specific, it can be done by overriding that
function in the file-format-specific subclass.
The original geometry referenced in `vtable` was deleted by the
`extrude_face_region` operator.
It is read soon after, so don't delete the original geometry
(param `use_keep_orig`).
This may have a small impact on performance.
transform_direction() can't handle parameters in constant address space.
Creating a local copy of the parameter satisfies the OpenCL compiler.
CUDA and CPU compilers should be able to optimize this away I hope.
As per T71295, the "duplicate+move" macro fails to store TRANSFORM_OT_translate properties once it's been used with rotation. I believe this is due to it being re-initialized with incorrect properties, reading bogus values from stored TRANSFORM_OT_rotate properties.
Force storing of actual operator id name instead of one defined in the macro, which in turn forces a name mismatch on initialization.
Reviewed By: #modeling, campbellbarton
Maniphest Tasks: T71295
Differential Revision: https://developer.blender.org/D6413
There are deeper issues than just updating the regression test .blend file
and the solution is dragging for far too long.
Considering this a known broken feature, which will either be fixed next week
or completely removed from the interface for the coming release.
Move redraw tagging to the gesture modal operator
to make sure this only runs when it's needed.
Caused by d591c8a350, which tagged the region to redraw when the
gizmos were tagged to refresh, however they wont redraw when hidden.
Thanks to @jbakker for finding the root cause.
In transform_motion_decompose, successive quaternion pairs are checked to be
aligned such that their interpolation is rotation through the shortest angle
between them. If not, the first in the pair was flipped. This can cause
problems for sequences of more than 2 quarternions, since flipping the first
in a pair might misalign the previously pair, if unlucky.
Instead, this change flips the second in the pair, which is safe when
iterating forwards.
Differential Revision: https://developer.blender.org/D6537
This patch adds support for the OptiX denoiser as an alternative to the existing NLM denoiser in Cycles. It's re-using the same denoising architecture based on tiles and therefore implicitly also works with multiple GPUs.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D6395
E.g. "Cube" would be placed after "Cube.001", which is not what you'd
expect. 2.80 handled this correctly.
Loosely based on D6525 by @radcapricorn, but found a bug in that and
prefered to do some further adjustments.
Also activates test for this case.
Adds tests covering a good amount of common cases and corner cases for
`BLI_strcasecmp_natural()`.
Could of course always add more tests for more cases, but don't want to
spend too much time on this.
This commit restores old metaball workaround which was forcing their
update from a single thread.
The root of the issue comes to the fact that metaball evaluation needs
to access metaballs from duplilists, so they are properly polygonized
with corresponding motherball which is outside of duplilist.
In a more ideal world this will be implemented in a way that will not
require iterating over all duplilists, but only through the ones which
actually contain metaballs for the given motherball. In practice this
ends up in a huge refactor in both relations builder (which meeds to
see whether there are metaballs in duplilists without actually
creating duplilist as it can not be done prior scene is evaluated)
and in metaballs area which need to use new relations information.
Additionally, metaball evaluation must become thread-safe, which is
currently not a case with dupli-object matrices. There might be issues
deeper in polygonization code which I am not aware of.
Having this forced single-thread evaluation is same as Blender 2.79
was doing.
Think it's better to have slower but simpler solution than to invest
time in refactoring area which requires deeper design changes.
Reviewed By: dfelinto
Differential Revision: https://developer.blender.org/D6539
Caused by own rBe02ecd599bdc.
Can happen with e.g. cloth.
Also fixes T59583
Maniphest Tasks: T72235, T59583
Differential Revision: https://developer.blender.org/D6547
The `in int flag;` in `gpu_shader_2D_edituvs_faces_vert.glsl`
don't have the values `FACE_UV_ACTIVE` and `FACE_UV_SELECT`.
Add face flags then.
Original patch is from @EitanSomething
Differential revision: https://developer.blender.org/D6520
This file had become disorganized, it wasn't clear which structs/flags
were deprecated.
- Add comments explaining what each struct is for.
- Use doxy sections.
- Remove outdated notes, unused flags.
- Group custom-data.
- Group deprecated structs in their own section.
T
This brush should be added to the set of brushes where we know which
vertices are going to be affected by the brush when starting the stroke.
This way we can limit the automasking only to those vertices instead of
flood filling the whole mesh from the active vertex.
All brushes that are not in this set will automask by flood filling the
mesh when starting the stroke. To improve this and make it work as most
users expect, we need a fast way to calculate topological distances on
high poly meshes.
Reviewed By: jbakker
Maniphest Tasks: T72251
Differential Revision: https://developer.blender.org/D6376
Before this it was possible to use the operator with Dyntopo sample mode
with a PBVH type GRIDS or FACES, causing a crash. Now we check first if
the PBVH type is correct before calling the sampling function.
We also check if the PBVH exists, which may also cause a crash.
Reviewed By: jbakker
Maniphest Tasks: T72647
Differential Revision: https://developer.blender.org/D6475
This was causing a crash when the mesh does not have the mask data
initialized. I also added the same check to mask extract as it works the
same way.
Reviewed By: jbakker
Maniphest Tasks: T72830
Differential Revision: https://developer.blender.org/D6513
This commits introduces the pose_ik_segments brush property in the Pose Brush. When increasing the IK segments count, the brush generates more segments and weights associations following the topology of the mesh. When moving the brush, these segments are transformed using an IK solver and they are used to deform the mesh.
When pressing Ctrl, the brush controls the segments' roll rotation instead of using the IK solver. The brush falloff controls how much rotation is propagated from the first to the last segment in the chain.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6389
working properly
'outliner_extract_children_from_subtree()' (introduced in
rB40a1c671655c) was extracting the children of non-matching parents
regardless of their own matching state.
Now properly filter the subtree prior to extracting.
Maniphest Tasks: T69246
Differential Revision: https://developer.blender.org/D6517
If pre-deselecting takes place, then flushing was not happening
('changed' never became true because no new faces were being selected).
This rectifies the logic. (also removed redundant double initialization
to false)
Maniphest Tasks: T72499
Differential Revision: https://developer.blender.org/D6459
Remove this pointer since it's linking Mesh data back to the object,
where a single edit-mesh may have multiple object users,
causing incorrect assumptions in the code.
Resolves dangling pointer part of the T72667 crash,
although there are other issues which still need to be fixed.
In EDBM_op_finish and EDBM_update_generic,
full Main lookups have been added which should be replaced with mesh
argument or the update tagging moved elsewhere.
Note that this is a bit clumsy having both edit-mesh and mesh,
BKE_editmesh_ensure_autosmooth & BKE_editmesh_lnorspace_update
are often called together, these could be made into a single functions.
The pointer is causing issues since two objects can share an edit-mesh,
removing in stages, see T72848.
Also fixes the material index being clamped by every object.
Now this also works for the UV Editor
Note: Only the transform tools currently support this. I would like to make this work for all the tools with gizmos, but need to find the nicest way to do it.
This was caused by a missing call to BKE_mesh_flush_hidden_from_verts()
when a SCULP_UNDO_HIDDEN undo step is processed.
Reviewed By: jbakker
Maniphest Tasks: T72700
Differential Revision: https://developer.blender.org/D6488
Users reported that Whiskey lake has the same issue as other intel
platforms where an extra glFlush is needed. This change will
add Whiskey Lake to that exception.
Patch provided by Philip Luk
There were two reasons the USD Exporter was listed as experimental:
- Originally there was no deduplication of mesh normals & UV coordinates
(resolved in rBf5e00f735106b5ec635806a4c795a2bc46ae8369), and
- the way materials were exported was incompatible with instancing with
USD 19.07. This seems to be resolved with the current version of USD
(19.11).
Blender (more specifically, `makesdna`) doesn't seem to like empty DNA
structs, so I couldn't remove all properties from
`UserDef_Experimental`. Instead I have just kept `char _pad0[8]`.
Reviewed by: campbellbarton
Differential Revision: https://developer.blender.org/D6519
For some reason socket flag and actual presence of link got out of sync.
Check for link to be present prior to access it.
Fixes crash opening file from T48684.
Was only using first ID instead of all of them.
Might have been causing issues when updating motion paths of
multiple objects.
Spotted by Jack C, thanks!
Nice reversed-logic mistake in rB693721cc7e7d.
How this could remain unnoticed for almost one year is fairly
mysterious, this should have basically broke all node tree copying,
would expect such bug to get reported within days, weeks at most...
Probably because that function is not that much used in current code.
Nice reminder also that those bloody nodetrees still need a lot of
cleanup/refactor/simplification when it comes to ID management code.
Reported/fixed as part of D6484, but this really needs its own commit.
In the Auto Merge & Split feature, multithreading was only used to
find duplicates between vertex and another vertex.
But with this patch, multithreading is now used to find intersections
etween edge and edge and between edge and vertex.
In my tests I noticed a performance improvement of around 180%
(0.017151 secs to 0.009373 secs)
Differential Revision: https://developer.blender.org/D6528
In 2.79 when moving a marker with `G` while holding `ctrl` the marker
would snap to one-second movements. This was (probably accidentally)
removed when the Timeline Editor was removed in rB5374865523faf253.
Reviewers: mano-wii
Differential Revision: https://developer.blender.org/D6527
Many things weren't working correctly in GP Edit Mode, such as select/deselect/invert all, basic tools, extrude, snap etc.
Now this mode works consistently with other modes.
`BLI_task_parallel_range` counts the number of tasks depending on the
number of items.
In the case of `BLI_bvhtree_overlap` the number of items is always
between 2 and 16, which makes it always run in single thread.
So, set the maximum number of items per thread to 1.
In my tests the cloth collision system (which calls that function)
went from 0.80fps to 0.88fps.
Differential Revision: https://developer.blender.org/D6523
As you can see, here is testing the "children" of `node1`.
So bvhtree is `tree1`.
This problem has never been observed because usually `tree_type`
of `tree1` equals `tree_type` of `tree2`.
Although not using multithreading, the `thread` parameter in the
`BVHTree_OverlapCallback` callback always returned a value between the
"number of threads".
This parameter should always be 0 in such cases.
Also a `BLI_Stack` was created for each "thread" and used.
This small overhead is no longer seen.
Differential Revision: https://developer.blender.org/D6510
T71495 describes two problems with animation of textures not showing up in
the dope sheet:
1. textures connected to force fields
2. textures of brushes
This patch resolves the first case.
An alternative would be to switch to iteration of dependencies using
`BKE_library_foreach_ID_link()`. This is a good idea to do at some point,
but adding these few lines was considerably easier & safer to do.
Enable by default since it allows selection
without gizmos getting in the way which is a common annoyance.
Although this has the drawback that subtle adjustments with
gizmos won't be detected until the drag threshold is reached.
This defaults to selection when not using a gizmo.
The previous behavior to drag anywhere can be set in the tool settings
or by selecting the fallback tool (Alt-W).
See: T66304
The entire particle system was skipped when the particle system itself did
not have any animation data. This caused the animation data on the texture
to be skipped.
Was caused by 6183688c35 (thanks ronsn for nailing it down!).
The issue is that order of copy-on-write operations is not defined, so
can not use flags set by that operation to make decision.
Since we are already respecting the User Preference for 'auto_smoothing'
in 'BKE_nlastrip_validate_fcurves', we should also do this for default
interpolation and handles.
Maniphest Tasks: T70986
Differential Revision: https://developer.blender.org/D6490
Previously the default values were left non-zero to avoid having to
update scripts. However, this meant it wasn't possible to setup
non-modal key bindings for smooth & randomize.
Now these operators follow logic of many other operators where setting
the value executes immediately, leaving unset runs modal.
Existing keymaps & scripts will need to be updated.
Addresses issue raised in f4a4ec8425.
Previously, compared to `Auto Merge` without `Split Edges & Faces`,
`Auto Merge` with this option ignored duplicates between selected
vertices. It only considered duplicates between selected vertices and
unselected vertices.
This is a regress and not a progress.
This commit implements this behavior, so this option matches the other
`Auto Merge`.
Currently the islands are created depending only on the visible UVs.
This can be confusing because compared to Edit Meshes, islands are created based on the selected elements.
T68284 shows a case where this confusion is observed.
Differential Revision: https://developer.blender.org/D6502
Previously, non-default alpha or float settings had be set manually.
With this change, the Add Tile and Fill Tile operators initialize
width, height, alpha and float from the currently selected tile
if it has a vaild ImBuf, otherwise from the first tile.
Previously the alpha was hardcoded to 0.7. Now it is possible to control
the cursor alpha by changing the alpha color of the cursor color
property. New alpha default is 0.9. This, with the new saturated colors,
should make the cursor more visible on highdpi screens.
I also removed the cache location preview as it is too visible right now
with the new alpha and color values.
Reviewed By: billreynish
Differential Revision: https://developer.blender.org/D6433
Partial updates are not currently supported in the Workbench engine, so
we can skip the rect calculation during the stroke.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6444
This was causing an ArithmeticError in OpenVDB with a voxel size that
small.
Another solution could be scaling both the mesh and the OpenVDB grid
with opposite values to support a larger range of voxel sizes, but I
would like to have a better solution to the voxel remesher compatibility
with small objects.
Reviewed By: JacquesLucke
Maniphest Tasks: T72747
Differential Revision: https://developer.blender.org/D6498
In a recent refactor we splitted the lines extractor in `extract_lines` and
`extract_lines_loose`. When an object is in edit mode the extracted
lines loose also had to include a dummy bmesh edge iterator. This change
adds this missing dummy method.
Reviewed By: antoniov
Differential Revision: https://developer.blender.org/D6499
Blender crashes when selecting a marker in the 3d viewport that is from the non active scene camera. This patch will solve this crash, but introduced a new scenario that isn't thought out. In the new scenario it is still hard to select a marker via the 3d viewport.
I would expect that when selecting a marker in this case would select the camera where the marker belongs to and select the marker that is under the mouse button.
Reviewed By: Sergey Sharybin
Differential Revision: https://developer.blender.org/D6360
In Blender 2.81 Look Dev was renamed to Material Preview
also the old look dev HDRIs could also be used in both
cycles and eevee. A more generic name was need.
As shown in the T68805, non-sized bones (such as the resulting extruded
bone) have no direction or orientation.
This can be bad for operators like `extrude_move` since the user might
want the resulting bone to be aligned with the bone that originated it.
The solution here is to get the parent bone orientation in the
transform operator if the bone has no size.
Differential Revision: https://developer.blender.org/D6486
Rewrite the checks for determining if the solution is actually within
the triangle to fix stability issues when the correct solution is on
an edge, and step is very small, i.e. the solution is already very
close. Also, comment more clearly what is happening geometrically.
This should fix problems when vertices that should project exactly
onto an edge actually miss, resulting in weird spikes. This made
Target Normal Project unusable for the voxel remesher.
Currently the action channels are applied after the existing
transformation, as if the action controlled a child of the
bone. This is not very natural, but more importantly, the
transform tools are not designed to work conveniently with an
additional 'pseudo-child' transformation, resulting in effects
like an unexpected pivot location.
Implementing a Before mode that integrates the action channels
as if applied to a parent allows using the special transform
tool code intended for dealing with such constraints.
Note that in either mode, Action constraints should be added
in reverse order, putting a new constraint before the existing
ones that the Action was keyframed to work together.
In order to implement the option, extract a utility from
the Copy Transform constraint code for combining transforms
with special anti-shear scale handling that matches the
Aligned Inherit Scale mode.
The Before mode also requires switching the constraint to
the Local owner space, while the After mode can still use the
World space for efficiency as before. Since the constraint
doesn't have an Owner space option in the UI, this has to be
handled in an RNA setter.
For full backward compatibility, the original simple matrix
multiplication mode is preserved as the third option, but it
is not recommended due to creating shear.
Differential Revision: https://developer.blender.org/D6297
For no apparent reason, when building Alembic the script would always
re-download and re-extract the Alembic source code. This is no longer the
case, and it now only happens if the source directory is missing. Since the
source directory name contains the Alembic version, it will automatically
trigger a download+extract when the version changes.
Previously, when an unknown parameter was passed to `install_deps.sh`,
the script would just show "Wrong parameter!" without any context. This
can make it hard to figure out what's exactly going wrong. Now it prints
which parameter it thinks is wrong.
- Object/pose checks were performed in same loop,
so selected pose bones were moved instead of the object.
- Snap selected to cursor/active incorrectly used unique object-data.
The //Distance from Object// and //Distance from Camera// modifiers still used the old 2.79 matrix multiplication syntax.
Differential Revision: https://developer.blender.org/D6468
This was disabled as part of b66ae8259e which disabled
animation for display mode and other cases where it doesn't make sense.
However it's useful to be able to overwrite frame ranges,
adding this back.
This adds UDIM support to e.g. the Displacement modifier.
The implementation is straightforward: If the image is tiled, lookup the
tile based on UVs and shift the UVs into the tile's coordinates.
The problem is described in a comment in the change.
Short version: If a pass was used as a divide_type but also requested
explicitly (e.g. diffuse color), it was added to the passes list
twice because the names of the two requests didn't match.
Then, when searching for the pass to divide by, the wrong one (not
the one that the kernel was writing to) was picked.
A bug in llvm < 9.0.1 causes the compiler to crash when
openmp is enabled. Since mantaflow uses tbb we can safely
disable this flag temporarily for this module.
Reviewed By: sebbas
Differential Revision: https://developer.blender.org/D6446
Actually, to purge orphans datablock you need go to Outliner, enable Orphan mode and press Purge button (that sometimes is out of the view because the window is too narrow).
To have this option hidden make very difficult to users use and understand what means orphan data, so this patch just adds a new Clean Up menu to File menu with this option. This menu could be used in the future for more clean up options. To have a general Clean Up menu is common used in other softwares.
Reviewed By: billreynish, mont29
Differential Revision: https://developer.blender.org/D6445
This commit affects `id_sort_by_name()` and `check_for_dupid()` helper:
* Add a new parameter, `ID *id_sorting_hint`, to `id_sort_by_name()`,
and when non-NULL, check if we can insert `id` immediately before or
after it. This can dramatically reduce time spent in that function.
* Use loop over whole list in `check_for_dupid()` to also define the
likely ID pointer that will be neighbor with our new one.
This gives another decent speedup to all massive addition cases:
| Number and type of names of IDs | old code | new code | speed improvement |
| -------------------------------- | -------- | -------- | ----------------- |
| 40K, mixed (14k rand, 26k const) | 39s | 33s | 18% |
| 40K, fully random | 51s | 42s | 21% |
| 40K, fully constant | 40s | 34s | 18% |
Combined with the previous commits, this makes massive addition of IDs more
than twice as fast as previously.
This commit affects `check_for_dupid()` helper:
* Add a special, quicker code path dedicated to sequential addition of a
large number of IDs using the same base name.
This gives a significant speedup to adding 'randomly'-named IDs:
| Number and type of names of IDs | old code | new code | speed improvement |
| -------------------------------- | -------- | -------- | ----------------- |
| 40K, mixed (14k rand, 26k const) | 49s | 39s | 26% |
| 40K, fully random | 51s | 51s | 0% |
| 40K, fully constant | 71s | 40s | 78% |
Note that 'random' names give no improvement as expected, since this new code
path will never be used in such cases.
This commit affects `check_for_dupid()` helper:
* Further simplify the general logic of the code (we now typically only do
one loop over the list of data-blocks, instead of two).
This gives a significant speedup to adding 'randomly'-named IDs:
| Number and type of names of IDs | old code | new code | speed improvement |
| -------------------------------- | -------- | -------- | ----------------- |
| 40K, mixed (14k rand, 26k const) | 62s | 49s | 27% |
| 40K, fully random | 76s | 51s | 49% |
| 40K, fully constant | 77s | 71s | 8% |
Note that 'constant' names give little improvement, as in that case the first
loop over the list of IDs (checking whether base given name was already in use)
was aborting very quickly.
This commit affects `check_for_dupid()` helper:
* Fix (serious though rare) bug where several IDs could end up with
exact same name (happened with over 10k IDs with same very long name).
* Fix (relatively harmless) func reporting it did not change the given
name when it actually had truncated it.
* Sanitize handling of supported min/max number suffixes (it now handles
between 1 and 1 billion, which should be way more than enough).
* Sanitize general logic to (hopefully!) make it easier to follow.
* General cleanup (naming, comments, variables scope, remove dead code, etc.).
Note that general performances here remain the same, there is no
measurable gain or loss. Algorithm remain also the same globally.
Attempt to use a GHash to speed up checks of used names proved to be
much worse, just building the GHash would already take as much time as
the whole process with current code...
This alone can make e.g. adding 40k IDs with default name (i.e. 'fully
constant' case in table below) about 15-20% faster:
| Number and type of names of IDs | old code | new code | speed improvement |
| -------------------------------- | -------- | -------- | ----------------- |
| 40K, mixed (14k rand, 26k const) | 75s | 62s | 21% |
| 40K, fully random | 90s | 76s | 18% |
| 40K, fully constant | 94s | 77s | 22% |
Idea is to use a first pass, where we just check one item every nth ones,
until we have found the chunk in which we want to insert the new item,
then do a basic linear comparison with all items in that chunk as before.
Also, list is now walked backward, as in most common 'massive insertion'
cases new ID's names have higher number, hence ends up towards the end of
the list.
This new sorting function can be between a few percents and 50% quicker than
original code, depending on various factors (like length of common parts of
ID names, whether new IDs should be added towards the end or not, how high
in numbering we are, etc.).
Note: another, full bisecting approach was also tried, which gives a massive
reduction of comparisons (from n items to log2(n)), but it only gave minor
improvements of speed from original fully linear code, while adding a fair
amount of complexity to the logic. Only case it was shining was the unlikely
'very long, almost similar ID names' case (since `strcasecmp()` is rather
costly then).
Those tests are here mostsly to ensure ID name management is working as
expected (the code ensuring we never have two ilocal data-blocks of the
same type with the same name in a .blend file).
Note: Currently fails in some cases, fixes are incoming.
Note: Ideally this would be in C, but we already have too many tests
linking the whole Blender and its libraries, this is becoming a real
pain to link debug + ASAN + tests build these days... So until we find a
better way to handle those dependencies, sticking to simple python
scripts.
Since rB6bc6d016c5e7, outliner was not opening back up from the found
active element (but only its ID instead -- all occurances of this ID in
any collection).
Now expand from the active element as well (but only do this for the
first occurance of the corresponding ID)
Maniphest Tasks: T71844
Differential Revision: https://developer.blender.org/D6329
updates in particle editmode
Particles themselves were cleared correctly but this was not tagging
batch cache dirty.
Might move this to a utility function later [since it is used in more
places], but that is for after going over some more reports...
Reviewers: sergey
Differential Revision: https://developer.blender.org/D5925
are visible
Not freeing PTCacheEdit and tagging batch cache dirty on undo will have
a couple of consequences. This patch fixes:
- crash deleting a particle, then undo
- basically any edit (combing, ...), then undo will leave child hairs
untouched
- adding hairs (through mirror, add tool, ...), then undo will leave
'orphaned' child hairs
See also D5755 for a related discussion
Fixes the crasher mentioned in T69000
Might move this to a utility function later [since it is used in more
places], but that is for after going over some more reports...
Reviewers: sergey
Differential Revision: https://developer.blender.org/D5912
This feature makes it possible to do a viewport render (a.k.a.
playblast) by only rendering those frames on which the selected objects
have a keyframe.
The frames to render are stored in a `BLI_bitmap`, which has a bit for
each frame set to 0 (skip) or 1 (render). An alternative approach would
be to construct a set of all keyframes to render, but that would make
both constructing the list and looking up frames in the list more
complex.
The only thing this feature does is skip OpenGL rendering of a frame. As
a result, 'skipped' frames are still included in the output, but just
use the render result of the last-rendered frame. This is exactly what's
described in T72229.
Differential Revision: https://developer.blender.org/D6443
Reviewed By: zeddb
Design task: T72229
option (even though it is being used for the ADD brush)
Add the option to the UI in that single case.
Maniphest Tasks: T72473
Differential Revision: https://developer.blender.org/D6418
Make indices accommodate into the measures of edgelength and edgeangle
so this results in a nice stack of up to three rows.
Maniphest Tasks: T72128
Differential Revision: https://developer.blender.org/D6357
Since BM_uv_vert_map_create would return NULL for an empty mesh, code
would then return from uv_select_linked_multi [where it should just skip
and continue instead...]
Maniphest Tasks: T63407
Differential Revision: https://developer.blender.org/D6441
Note that this removes image_paint.detect_data from
UnifiedPaintPanel.get_brush_mode, I can't see why it's needed,
it causes issues where the texture paint UI isn't used when it can be.
The ratio for area stretching was packed into an unsigned int, but could
contain negative numbers. This flipped the negative numbers to high
positive numbers and rendered the wrong color in the stretching overlay.
I can remember during {T63755} I had to flip the sign to get the
correct result, but couldn't find out why that was needed. Now I know.
Reviewed By: fclem, mano-wii
Differential Revision: https://developer.blender.org/D6440
All panels were calling poll to draw in their section causing a lot of
repeated boiler plate poll functions.
Also rename 'PreferencePanel' to 'CenterAlignMixIn'
since this is it's purpose.
The tooltip was static, so it was the same for viewport-rendering the
current frame and for the entire animation. It is now different for
those two.
The structure of `screen_opengl_render_description()` is such that it
allows for adding a new description for a soon-to-come feature (T72229).
This resolves a logical problem using tweak as a fallback tool.
See: T66304#828742
The select action would immediately show the gizmo underneath it,
then the tweak would be handled by the gizmo instead of moving the item
under the cursor.
Currently this works by hiding the gizmo until the tweak event ends.
While it's simpler to check if the gizmo received a mouse-down event,
it causes flickering before each drag event which feels like a glitch.
This is optional for each gizmo type because there are cases where this
can be useful to activate the gizmo immediately (mesh rip for example).
Vertex colors behaved differently as the paint overlay mixed the colors
in display mode and the results was multiplied on top of the original
shading.
This patch will align the implementation to texture painting where the
colors are drawn by the workbench engine so the correct shading is
applied.
This also means that we don't show the vertex colors overlay when not
in solid mode.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6436
Introduced by {T67981}. We changed the python API for curve evaluation.
Freestyle still used the old call that failed. This patch updates
FreeStyle to use the new API. I checked other areas in freestyle but it
seemed to be the only `evaluate` for curves that is called directly.
Reviewed By: zeddb
Differential Revision: https://developer.blender.org/D6430
Due to recent refactoring of the overlay unification the camera limits
were also visible when the overlays were turned off. This was because
the `draw_extra` had an exception for when looking through the camera.
This change also takes the global hide overlays into account. So now the
camera limits will not be drawn when overlays are turned off. This also
fixed other camera related overlay drawing.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6394
Due to the refactoring of the overlay engine the draw caches were
changed. The sphere batch used to have positions and normals. After the
refactoring it didn't had the normals anymore. The normals are needed
for shading. As they were not there the look dev spheres were rendered
black.
This change add the `nor` attribute to `DRW_cache_sphere_get` batch.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6393
The previous cursor colors were chosen to match the toolbar icon color,
but the contrast on top of the default matcaps was not enough. This
commit uses more saturated colors, which are more visible on top of the
default matcaps.
Reviewed By: jbakker, billreynish
Differential Revision: https://developer.blender.org/D6194
With the brush reorganization included in D5928, the brush panels had covered the topbar and make impossible to use the drawing tools.
Now, the options are grouped in Stroke popover, similar to Sculpt.
Also fixed some missing or wrong texts.
There are options for the exporter that are relevant for each export, for
example the choice between Viewport or Render settings, or whether to
export the current frame or an animation. It's better to have the options
panel opened by default.
When going from EDIT to OBJECT mode, Blender updates the object data from
the edit-mode data. This took care of renaming FCurves that animate Curve
control points when control points are added/removed, but this didn't keep
the FCurve groups intact. Since the FCurve groups are tightly connected to
the Action channels, it's hard to keep the group pointers intact during
this process. Instead of making the code even more complex in an attempt to
do that, I implemented a function (`BKE_action_groups_reconstruct()`) that
rebuilds the group channel pointers.
The call to `action_groups_add_channel()` had to be removed because it
updates the the next/prev pointers of the FCurve while we're looping over
them, causing infinite loops.
- Use abbreviations min/max
this is used throughout the existing API.
- Rename use_adaptive_stepping to use_adaptive_timesteps
since this is used with timesteps_min/max it's clearer
to use matching terms.
These attributes checked for any baked / baking
since this is a common test that was performed in layout code.
Also follow our naming convention - using an 'is_/has_' prefix
in this case since "cache_baked_data" reads as if it's used to access
the baked data.
Fixed sized strings are always initialized & this is not done
elsewhere before calling BLI_path_join.
Remove since it's not needed and makes it read as if the function
might not initialize the output argument.
gpu_draw.c had generic sounding utility functions which were specific
to smoke drawing.
Split into it's own file so the functionality is clearly separated.
Allows enabling debug prints in this file easily,
differentiates it from code which has been disabled for other reasons.
Also remove unused DEBUG_TIME.
The particle system needs some tweaks so that it can be used for particles created in Mantaflow (i.e. to read both FLIP and secondary particles from Mantaflow).
Reviewed By: sergey
Maniphest Tasks: T59995
Differential Revision: https://developer.blender.org/D3857
Cycles needs some smaller updates so that the up-res smoke wavelet noise and the liquid mesh speed vector export work correctly.
Reviewed By: mont29
Maniphest Tasks: T59995
Differential Revision: https://developer.blender.org/D3854
A collection of smaller changes that are required in the /blender/source files. A lot of them are also due to variable renaming.
Reviewed By: sergey
Maniphest Tasks: T59995
Differential Revision: https://developer.blender.org/D3855
Probably the most significant changes are in smoke.c.
New functionality includes:
- support for adative time steps (substeps)
- write flow objects to grid structure so that Mantaflow can generate levelsets
- no more distinction between FLUID_3D and WTURBULENCE objects. Everthing that communicates with Mantaflow now lives in a FLUID object.
Reviewed By: sergey
Maniphest Tasks: T59995
Differential Revision: https://developer.blender.org/D3861
All new simulation parameters need to be registered in the RNA. Especially for liquids a lot of new ones need to be added.
Reviewed By: sergey
Maniphest Tasks: T59995
Differential Revision: https://developer.blender.org/D3858
Similarly to physics_fluid.c (in same directory) which handled the baking process for Elbeem, there is now physics_manta.c which handles it for Mantaflow.
There are two types of jobs: one for baking and another for freeing. The generic jobs will be used to bake / free specific parts of the simulation (e.g. bake mesh, free particles, etc.).
The jobs are only being used in the "modular" cache mode where the simulation has to be baked in parts.
Reviewed By: sergey
Maniphest Tasks: T59995
Differential Revision: https://developer.blender.org/D3856
Smaller changes in the build files to reflect the new Mantaflow macro.
Reviewed By: sergey
Maniphest Tasks: T59995
Differential Revision: https://developer.blender.org/D3853
All the new fluid simulation parameters need to be added the according structs (i.e. domain settings, flow settings).
Reviewed By: sergey
Maniphest Tasks: T59995
Differential Revision: https://developer.blender.org/D3860
With Mantaflow the current smoke modifier UI will accommodate both smoke and liquids.
In addition, there is now an option for Mantaflow liquids in the quick effects section ("Quick Liquid").
Reviewed By: sergey
Maniphest Tasks: T59995
Differential Revision: https://developer.blender.org/D3852
Files from /intern/mantaflow handle the communication between core Blender code and Mantaflow itself. It's the bridge to communicate with Mantas Python functions.
Code from /intern/mantaflow/intern/strings/ is pure Manta code and would likely need less attention in the review.
Reviewed By: sergey
Maniphest Tasks: T59995
Differential Revision: https://developer.blender.org/D3851
Includes preprocessed Mantaflow source files for both OpenMP and TBB (if OpenMP is not present, TBB files will be used instead).
These files come directly from the Mantaflow repository. Future updates to the core fluid solver will take place by updating the files.
Reviewed By: sergey, mont29
Maniphest Tasks: T59995
Differential Revision: https://developer.blender.org/D3850
Previously this limit was rather high, but with UDIMs it's fairly easy
to reach this many images. Even though this exceeds the texture limit
on most hardware as far as I can tell, it should at least not crash.
The old code uses a fixed array which overflows eventually, this fix
replaces the array with a GSet.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6416
The ImageTextureNode incorrectly used the tile slot encoding for box-
mapped textures as well. Since box-mapping always generates UVs that
lie in the 1001 tile, there's no need to support tiles here.
This was caused by a call to paint_2d_bucket_fill that I missed in the
UDIM changes.
Now, this feature does not only not crash, but it even works with tiled
images!
- Use the clip mask context menu for the image editor.
- Remove redundant CLIP_MT_mask_handle_type_menu.
- Remove "Add" items (was only in image mask context menu)
as the convention is not to include these in the context menu.
The tools passed to _tools_flatten, _tools_flatten_with_tool_index
already have dynamic tool items expanded, so there is no need to check
for callable tool items.
The code checked for the presence of more than one tile before
substituting the tile number into the filename, so if a one-tile
UDIM was used (or all but one tile were culled), the substitution
was skipped and as a result the file was not found.
With this change, the code explicitly tracks whether substitution
is required, avoiding this problem.
This also fixes another problem: The Environment texture never
does substitution since it doesn't support UDIMs, but before the
syncing code still inserted the placeholder into the filename if the
user selected a tiled background image.
This makes a number of changes to the tool settings brush UI:
- All brush-related controls are now grouped together, so you can see which items are brush settings are which are not. Previously it was all jumbled together.
- The brush picker is in a separate panel, so that you can switch brushes without worrying about the settings, or vice versa.
- Custom Icon settings moved from the Display settings(now known as Cursor) to the Brushes panel.
- UnifiedPaintSettings panels are removed and the contained options are now next to their relevant setting with a globe icon toggle. This is not displayed in the header.
- 2D Falloff and Absolute Jitter toggles were changed into enums, to make it clearer what happens when they are on or off.
- Adjust Strength for Spacing option was in the Options panel in some modes, but in the Stroke panel in others. It is now always under Stroke.
- Display (now Cursor) panel was reorganized, settings renamed.
- 2-option enums are annoying as a drop-down menu, so they are now drawn with expand=True.
- Smooth Stroke and Stabilizer options in grease pencil and other paint modes are now both called "Stabilize Stroke", for consistency and clarity.
- De-duplicated some drawing code between various painting modes' brush options. I tried to keep de-duplication reasonable and easy to follow.
- A few more tweaks - see D5928 for the extensive list.
Most of the patch is written by Demeter Dzadik, with some additions by myself
Differential Revision: https://developer.blender.org/D5928
Reviewers: Pablo Dobarro, Bastien Montagne, Matias Mendiola
Shift-dragging with the Box Select tool would also select the nearest point.
Using a Click instead of Press event for selection (just like the default keymap) fixes this.
This was causing errors to show in the terminal.
Reviewed By: campbellbarton
Maniphest Tasks: T72409
Differential Revision: https://developer.blender.org/D6407
- The default value of USD attributes is now only set on the first sample.
Previously this was done for every sample (so the final default was the
last value, rather than the first value).
- More use of the sparse value writer, now also for UV coordinates, mesh
normals, and curve points.
This commit introduces the first version of an exporter to Pixar's
Universal Scene Description (USD) format.
Reviewed By: sergey, LazyDodo
Differential Revision: https://developer.blender.org/D6287
- The USD libraries are built by `make deps`, but not yet built by
install_deps.sh.
- Only experimental support for instancing; by default all duplicated
objects are made real in the USD file. This is fine for exporting a
linked-in posed character, not so much for thousands of pebbles etc.
- The way materials and UV coordinates and Normals are exported is going
to change soon.
- This patch contains LazyDodo's fixes for building on Windows in D5359.
== Meshes ==
USD seems to support neither per-material nor per-face-group
double-sidedness, so we just use the flag from the first non-empty
material slot. If there is no material we default to double-sidedness.
Each UV map is stored on the mesh in a separate primvar. Materials can
refer to these UV maps, but this is not yet exported by Blender. The
primvar name is the same as the UV Map name. This is to allow the
standard name "st" for texture coordinates by naming the UV Map as such,
without having to guess which UV Map is the "standard" one.
Face-varying mesh normals are written to USD. When the mesh has custom
loop normals those are written. Otherwise the poly flag `ME_SMOOTH` is
inspected to determine the normals.
The UV maps and mesh normals take up a significant amount of space, so
exporting them is optional. They're still enabled by default, though.
For comparison: a shot of Spring (03_035_A) is 1.2 GiB when exported
with UVs and normals, and 262 MiB without. We probably have room for
optimisation of written UVs and normals.
The mesh subdivision scheme isn't using the default value 'Catmull
Clark', but uses 'None', indicating we're exporting a polygonal mesh.
This is necessary for USD to understand our normals; otherwise the mesh
is always rendered smooth. In the future we may want to expose this
choice of subdivision scheme to the user, or auto-detect it when we
actually support exporting pre-subdivision meshes.
A possible optimisation could be to inspect whether all polygons are
smooth or flat, and mark the USD mesh as such. This can be added when
needed.
== Animation ==
Mesh and transform animation are now written when passing
`animation=True` to the export operator. There is no inspection of
whether an object is actually animated or not; USD can handle
deduplication of static values for us.
The administration of which timecode to use for the export is left to
the file-format-specific concrete subclasses of
`AbstractHierarchyIterator`; the abstract iterator itself doesn't know
anything about the passage of time. This will allow subclasses for the
frame-based USD format and time-based Alembic format.
== Support for simple preview materials ==
Very simple versions of the materials are now exported, using only the
viewport diffuse RGB, metallic, and roughness.
When there are multiple materials, the mesh faces are stored as geometry
subset and each material is assigned to the appropriate subset. If there
is only one material this is skipped.
The first material if any) is always applied to the mesh itself
(regardless of the existence of geometry subsets), because the Hydra
viewport doesn't support materials on subsets. See
https://github.com/PixarAnimationStudios/USD/issues/542 for more info.
Note that the geometry subsets are not yet time-sampled, so it may break
when an animated mesh changes topology.
Materials are exported as a flat list under a top-level '/_materials'
namespace. This inhibits instancing of the objects using those
materials, so this is subject to change.
== Hair ==
Only the parent strands are exported, and only with a constant colour.
No UV coordinates, no information about the normals.
== Camera ==
Only perspective cameras are supported for now.
== Particles ==
Particles are only written when they are alive, which means that they
are always visible (there is currently no code that deals with marking
them as invisible outside their lifespan).
Particle-system-instanced objects are exported by suffixing the object
name with the particle's persistent ID, giving each particle XForm a
unique name.
== Instancing/referencing ==
This exporter has experimental support for instancing/referencing.
Dupli-object meshes are now written to USD as references to the original
mesh. This is still very limited in correctness, as there are issues
referencing to materials from a referenced mesh.
I am still committing this, as it gives us a place to start when
continuing the quest for proper instancing in USD.
== Lights ==
USD does not directly support spot lights, so those aren't exported yet.
It's possible to add this in the future via the UsdLuxShapingAPI. The
units used for the light intensity are also still a bit of a mystery.
== Fluid vertex velocities ==
Currently only fluid simulations (not meshes in general) have explicit
vertex velocities. This is the most important case for exporting
velocities, though, as the baked mesh changes topology all the time, and
thus computing the velocities at import time in a post-processing step
is hard.
== The Building Process ==
- USD is built as monolithic library, instead of 25 smaller libraries.
We were linking all of them as 'whole archive' anyway, so this doesn't
affect the final file size. It does, however, make life easier with
respect to linking order, and handling upstream changes.
- The JSON files required by USD are installed into datafiles/usd; they
are required on every platform. Set the `PXR_PATH_DEBUG` to any value
to have the USD library print the paths it uses to find those files.
- USD is patched so that it finds the aforementioned JSON files in a path
that we pass to it from Blender.
- USD is patched to have a `PXR_BUILD_USD_TOOLS` CMake option to disable
building the tools in its `bin` directory. This is sent as a pull
request at https://github.com/PixarAnimationStudios/USD/pull/1048
This patch contains the work that I did during my week at the Code Quest - adding support for tiled images to Blender.
With this patch, images now contain a list of tiles. By default, this just contains one tile, but if the source type is set to Tiled, the user can add additional tiles. When acquiring an ImBuf, the tile to be loaded is specified in the ImageUser.
Therefore, code that is not yet aware of tiles will just access the default tile as usual.
The filenames of the additional tiles are derived from the original filename according to the UDIM naming scheme - the filename contains an index that is calculated as (1001 + 10*<y coordinate of the tile> + <x coordinate of the tile>), where the x coordinate never goes above 9.
Internally, the various tiles are stored in a cache just like sequences. When acquired for the first time, the code will try to load the corresponding file from disk. Alternatively, a new operator can be used to initialize the tile similar to the New Image operator.
The following features are supported so far:
- Automatic detection and loading of all tiles when opening the first tile (1001)
- Saving all tiles
- Adding and removing tiles
- Filling tiles with generated images
- Drawing all tiles in the Image Editor
- Viewing a tiled grid even if no image is selected
- Rendering tiled images in Eevee
- Rendering tiled images in Cycles (in SVM mode)
- Automatically skipping loading of unused tiles in Cycles
- 2D texture painting (also across tiles)
- 3D texture painting (also across tiles, only limitation: individual faces can not cross tile borders)
- Assigning custom labels to individual tiles (drawn in the Image Editor instead of the ID)
- Different resolutions between tiles
There still are some missing features that will be added later (see T72390):
- Workbench engine support
- Packing/Unpacking support
- Baking support
- Cycles OSL support
- many other Blender features that rely on images
Thanks to Brecht for the review and to all who tested the intermediate versions!
Differential Revision: https://developer.blender.org/D3509
Also adds a generic popover that can be used whenever an active tool has too
many settings than can fit in the horizontal area. The popover calls the active
tool's draw_settings with "extra" set to True.
Users should be able to know explicitly what they are testing.
By having them all enabled we run into a scenario where a new
experimental feature may have been introduced, and the user
is now using it without being even aware of that.
Differential Revision: https://developer.blender.org/D6404
The instructions for this part are not exactly clear, but better to document
what took us a while to figure out to get a new system set up for signing.
It seems it does work along multiple axes in some cases, but not at all. So
restored the UI for now, waiting for a better fix.
This reverts commit 9569425b02.
With upcoming light group passes, for them to sum up correctly to the combined
pass the clamping must be more fine grained.
This also has the advantage that if one light is particularly noisy, it does
not diminish the contribution from other lights which do not need as much
clamping.
Clamp values on existing scenes will need to be tweaked to get similar results,
there is no automatic conversion possible which would give the same results as
before.
Implemented by Lukas, with tweaks by Brecht.
Part of D4837
Part of T70240
This is the initial implementation of Weld Modifier.
New features will be added later.
ToDo:
- Seams: restrict welding to vertices along boundary edges.
- Edge Collapse: collapse edges below the length threshold.
- New icon.
- Some customdata are not being correctly interpolated.
Differential Revision: https://developer.blender.org/D6383
Viewport: Disable Clipping For EEVEE and External Renderers
Currently it is possible that, when using viewport clipping, the display and tools communicate
different information to the user then the renderer does. The reason is
that the renderer does not support viewport clipping. Both EEVEE and
Cycles do not support it.
This patch will disable the clipping in all the tools and drawing code
when the viewport drawing mode is `Material Preview` or `Rendered`.
This patch introduces a `RV3D_CLIPPING_ENABLED` util that checks if
clipping is enabled for the given `rv3d` and `v3d`. Also in places where
it was needed we added the `ViewContext` as a carrier for the `View3D`
and `RegionView3D`.
There are a few areas in the tooling (select, projection painting) that
still needs to be tackled after this patch.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6047
Scale Cage was using the same shortcut as Insert Scale Keyframe (Shift-R)
This isn't neccessary anyway since you can use the same key to cycle the tools.
Fix for T72309. The crash was caused by a missing check of the draw state, which resulted in dereferencing of a null pointer.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6380
The `DEG_depsgraph_query.h` file uses the `ITER_BEGIN` and `ITER_END`
macros defined in `BLI_iterator.h` without including that header.
No functional changes.
In the current OpenCL implementation we have a work-around for platforms
that didn't support NULL pointers. We used to replace all NULLs and
empty arrays with a pointer to a single byte on the OpenCL Device.
During investigation of {T65924} it was asked to remove this work-around
for testing. This change improves the render times.
SCENE | BEFORE | AFTER
--------------------+--------+-------
bmw27 | 108 | 89
barbershop_interior | 867 | 673
classroom | 270 | 173
fishy_cat | 244 | 196
koro | 249 | 207
pavillon_barcelona | 582 | 414
Note that this change does not fix T65924 it just improves the
rendering performance for OpenCL. We haven't tested this patch on all
platforms so we should keep an eye out on the tracker.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D6391
Updates blender subversion in order to properly handle recent userdef theme changes.
Differential Revision: https://developer.blender.org/D6388
Reviewed by Campbell Barton
This seems to only affect some drivers. Rendering to multiple targets
without all output variables defined seems to be undefined behavior.
Thanks to gaiaclary for reporting on blendercoders.
Custom render passes are added in the Shader AOVs panel in the view layer
settings, with a name and data type. In shader nodes, an AOV Output node
is then used to output either a value or color to the pass.
Arbitrary names can be used for these passes, as long as they don't conflict
with built-in passes that are enabled. The AOV Output node can be used in both
material and world shader nodes.
Implemented by Lukas, with tweaks by Brecht.
Differential Revision: https://developer.blender.org/D4837
Steps to reproduce were:
* Change File Browser display mode to fullscreen in Preferences
* File > Save As (make sure existing .blend is selected)
* File > Open
The file name would still be shown in red and the + and - icons would be
visible, which should only be the case for saving files, not opening.
Note that this change makes all `FileSelectParams.flag` values be reset
on re-opening a File Browser, which *may* in fact cause other issues.
It's easy to fix those though, and I'd prefer properly resetting the
flags and only keeping specific ones in that case.
Issue likely caused by 8b31f6fb21.
With this, initializing the toolsystem (e.g. for a new workspace-scene
combination) would skip the entire create->initialize routine for
image/texture painting settings. Reason being that these are not
allocated, unlike other paint settings. So while correctly skipping the
create part, it also skipped the initialization, which was still needed.
This does further changes in related code to avoid NULL pointer
accesses.
The issue is that `something.path_resolve('"custom_property"')` raises a
`ValueError` when the custom property is set to `None`. Since `None`
cannot be stored in a keyframe anyway, the property is now silently
skipped. Not having an explicit value is the closest we can get to
`None`. This of course breaks when the value should be `None` in between
not-`None` values, but I would consider that as a problem with the rig,
and not something Blender can fix.
To follow the standard conventions, the simplify options for grease pencil are inverted now, so to disable the file, uncheck the fill option and not as before that must be checked..
Before it was confusing because the simplify was activated checking the option and this was opposite to the mesh simplify options.
The result of normalising the bone vector wasn't checked, so it resulted
in a zero-length vector being multiplied with the desired length. Choosing
an arbitrary vector prevents the bone being 'stuck' at zero length.
Thanks @mano-wii for the patch.
The edit overlays were drawn dispite of the global hide overlays toggle.
This patch checks the global hide overlay toggle to see if it needs to draw
these overlays.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6371
This can be used to make closed surfaces behave more like a soft body.
Reviewed By: Jacques Lucke
Differential Revision: http://developer.blender.org/D5788
When size pressure is enabled, the radius may not be enough to sample
any vertices to calculate the area normal. This lead to a vector 0 plane
and a division by 0 when calculating the signed distance to the plane,
which produces a NaN that was being written to the vertex coordinates.
Reviewed By: brecht
Maniphest Tasks: T72006
Differential Revision: https://developer.blender.org/D6326
This commit fixes 3 bugs:
- Fix the crash reported in T72054. The BMesh elem table and the vd.no was null, so we now ensure that the table exists before running any sculpt tool in dyntopo. The relax function also uses vd.fno in case that vd.no is not available.
- Fix missing updates of the bounding boxes when running the mesh filter. This can be optimized by running the updates only when the filter finishes. Without this, it is impossible to sculpt the user modifies the mesh too much with the filter.
- Fix incorrect solution of relax vertex when using EEVEE. Relaxing the mesh requires the updated normals after each iteration. This was done by the PBVH rendering code, but when running EEVEE it was using incorrect normals. Now normals are updated after each iteration.
Reviewed By: brecht
Maniphest Tasks: T72054
Differential Revision: https://developer.blender.org/D6333
Some other areas in the brush code outside sculpt mode assume that
pressure is multiplied directly on top of the initial size. This patch
calculates the pixel radius correctly using the brush size from sculpt
mode to get the dyntopo detail size.
When the new brush input system is in place, all these values will come
directly from the brush input code with all the custom curves applied
per brush, so all paint modes will have a correct brush behavior and all
this sculpt mode specific code won't be necessary.
Reviewed By: jbakker
Maniphest Tasks: T72092
Differential Revision: https://developer.blender.org/D6339
The old mask brush implementation was adding the brush value to the
previous vertex mask value and clamping the result. This leads to
visible artifacts in the mask gradient as the value approaches 0 or 1,
so it was not possible to paint a smooth mask with this brush.
Now we are also multiplying by the previous mask value before clamping,
fixing all those gradient artifacts.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6341
This adds compaction support for OptiX acceleration structures, which reduces the device memory footprint in a post step after building. Depending on the scene this can reduce the amount of used device memory quite a bit and even improve performance (smaller acceleration structure improves cache usage). It's only enabled for background renders to make acceleration structure builds fast in viewport.
Also fixes a bug in the memory management for OptiX acceleration structures: These were held in a dynamic vector of 'device_memory' instances and used the mem_alloc/mem_free functions. However, those keep track of memory instances in the 'cuda_mem_map' via pointers to 'device_memory' (which works fine everywhere else since those are never copied/moved). But in the case of the vector, it may decide to reallocate at some point, which invalidates those pointers and would result in some nasty accesses to invalid memory. So it is not actually safe to move a 'device_memory' object and therefore this removes the move operator overloads again.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6369
This makes is so repeated key presses will cycle the tools in the same slot in the toolbar.
Users can tap Q repeatedly to switch selection tools, or press Ctrl-E repeatedly to enable the various Extrude tools, etc.
This is only supposed to happen when copying nodes that are part of the user
editable database, not temporary copies for the dependency graph.
The LIB_ID_COPY_LOCALIZE test was wrong because it is a combination of multiple
bitflags as pointed out by Bastien, and was actually redundant anyway since
LIB_ID_CREATE_NO_MAIN is part of it.
Previously Noise and Wave texture nodes would use noise functions within a [0,1]
range for distortion effects. We either add or subtract noise from coordinates,
never do both at same time. This led to the texture drastically shifting on the
diagonal axis of a plane / cube. This behavior makes the Distortion input hard
to control or animate. Capabilities of driving it with other texture are also
limited, diagonal shifting is very apparent.
This was fixed by offsetting the noise function to a signed range and making it
zero-centered. This way noise is uniformly added and subtracted from coordinates.
Texture pattern sticks to main coordinates which makes it way easier to control.
This change is not strictly backwards compatible, there is versioning to ensure
the scale of the distortion remains similar, but the particular pattern can be
a little different.
Differential Revision: https://developer.blender.org/D6177
Adds theme settings to allow change of front and back faces of the Face Orientation overlay
Differential Revision: https://developer.blender.org/D6262
Reviewed by Jeroen Bakker
Modes: Linear interpolation (default), stepped linear, smoothstep and smootherstep.
This also includes an additional option for the **Clamp node** to switch between **Min Max** (default) and **Range** mode.
This was needed to allow clamping when **To Max** is less than **To Min**.
Reviewed By: JacquesLucke, brecht
Differential Revision: https://developer.blender.org/D5827
When creating shaders and using maths functions it is expected that Blender should match functions in other DCC applications, game engines and shading languages such as GLSL and OSL.
This patch adds missing functions to the Blender maths node.
Ideally, it would be nice to have these functions available to vectors too but that is not part of this patch.
This patch adds the following functions trunc, snap, wrap, compare, pingpong, sign, radians, degrees, cosh, sinh, tanh, exp, smoothmin and inversesqrt.
Sign function is based on GLSL and OSL functions and returns zero when x == 0.
Differential Revision: https://developer.blender.org/D5957
Allows each File Browser list item in Volumes and System to use individual icons.
Differential Revision: https://developer.blender.org/D5802
Reviewed by Julian Eisel
Changes file names of two icon 'dat' files to reflect previous identifier rename.
Differential Revision: https://developer.blender.org/D6166
Reviewed by Julian Eisel
Implement T66304 as an experimental option,
available under the preferences "Experimental" section.
- When enabled most tools in the 3D view have a gizmo.
- Dragging outside the gizmo uses the 'fallback' tool.
- The fallback tool can be changed or disabled in the tool options
or from a pie menu (Alt-W).
Tests were missing a manifest, and were importing the
wrong version of Microsoft.Windows.Common-Controls
causing blenloader_test, bmesh_core_test and alembic_test
to fail due a loader error.
This reverts commit 3d9cc4d3f1. The commit
message and intent behind the commit is unclear. We generally want the
discrete GPU to be used for best performance, not the integrated GPU.
In older versions the ms crt was only a few dlls, in recent versions
this jumped to over 40 leading to quite a bit of clutter in our
bin folder.
This change moves the CRT into its own folder.
For developers that generally already have the runtime globaly
available on their machine, there is a new cmake option
(WITH_WINDOWS_BUNDLE_CRT, default ON) that you can use to toggle
installing the runtime to the blender bin folder, and save some
time during the initial build, this option is off by default for
only the developer profile.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6132
Multisample buffers were used for smooth line drawing. As we now have
an algorithm that doesn't need the multisample buffers we can remove
them.
The user preference for viewport multi_sampling is replaced by single
toggle overlay `use_overlay_smooth_wire`. By default this setting is
enabled as the new drawing is really quick (<1ms) and uses zero hacks.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6367
Enables Windows 10 feature that automatically adjusts non-client area (title bar) on high-DPI displays.
Differential Revision: https://developer.blender.org/D6370
Reviewed by Brecht Van Lommel
We had a manifest file, but it was seemingly not used, some
settings were done using linker pragmas, some of them visual
studio would set by default for us, others where not set at all.
This patch changes:
- Single manifest file where we can maintain all settings in
a single location, removal of any linker pragmas related to
the manifest.
- Compatibly settings for win vista - win10, without this any
call to any of the GetVersion and related functions (GetVersionEx,
VerifyVersionInfo, IsWindowsXxxx) will by default say we are
on vista and OS specific optimizations in external libraries may
be missed.
-Rather than having it in the .RC file in an #ifdef which may
or may not trigger depending on the build tool used, we tell
cmake to treat it as a source file and it will do the right
thing for both the ninja and visual studio generators.
Differential Revision: https://developer.blender.org/D6136
Reviewers: brecht
When adding a modifier to an object, the drop-down select box has the
same mouse-over tooltip for each modifier type: "Add a procedural
operation/effect to the active object". This isn't helpful when you
don't know what the modifier does from just reading the name.
This patch adds descriptions for most modifier types, so that it's
clearer what the modifiers do. The text was provided by @werwack after
discussion on DevTalk[1] and taken from the Blender Manual, and
subsequently updated by @billreynish and @HooglyBoogly.
Not all modifiers have a short one-line description in the manual, hence
those are still missing in this patch.
[1] https://devtalk.blender.org/t/ui-contextual-modifier-description-in-the-tooltips-of-the-add-modifier-dialog-window/10382
Reviewed By: billreynish
Differential Revision: https://developer.blender.org/D6352
Switch to Gregory basis patches which are tangent continuous across their
boundaries.
Originally we've used BSpline basis patches to be more compatible with the
old subdivision code, but a lot of things changed anyway.
The Camera Background Images uses a alpha under blending. For alpha
under blending to work correctly the framebuffer containing the result
of the render engine needs to be active
(`DefaultFramebufferList.default_fb`) and the source blend color needs
to be premultiplied with alpha.
Due to recent refactoring this wasn't the case and it seemed that the
background image was drawn in front of the scene. This patch sets the
correct state so it seems to be drawn behind the scene.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6365
Introduced by 9c337fcfe2 mistaken that `MeshExtract.use_threading` set
to false means that no threading is used at all. This is not the case it
will still perform threading for large objects, it will only run the
different subtasks in serial.
Fixed by scheduling the `lines_loose` in the task_pool after the rest
have been executed. This is cleaner than the previous implementation as
it sticks more to the actual design.
This use the overlay AA pass to antialias the selection outlines.
This also do all search and expand in one pass and reduce the computation
time and memory used (2 x 32bit/pixel buffer less).
Note that the aliasing is a bit worse than the old FXAA that we used to have.
Previously the decimation would take the whole curve into account when
decimating and not just the selected part.
This also contains various smaller bug fixes for the fcurve decimation.
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D6286
Bone relationship lines needs to be hidden in:
* object mode
* or when relationship lines are turned off
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6356
The lines index buffer can contain all edges (edit mode) or only loose
edges (object mode). When switching between these modes the wrong
content of the index buffer can be used.
This patch will clear the lines index buffer when a `loose_edges` is requested. Making sure it is always up to date.
Note that this is supporting an exising hack where the IBO is truncated
during the creation. We should find a different way how to solve these
kind of issues.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6349
When using Render Viewport Animation the meta data
was only stamped when a float buffer was used. In recent changes it was
possible to use a char buffer for the result.
This commit will also support stamping of metadata using a char buffer.
Add new icons and panels Grease Pencil Dopesheet to manage layers without having the properties panel visible.
Also, the icons are in the same order in Dopesheet, Layers and Material list to keep consistency.
As the number of columns for icons is limited to 3 and we also need use a factor, I have impleted the change using slider area. Also, the slider option is enabled by default for 2D Template.
See T72026 for more info.
Reviewed By: mendio, pepeland, billreynish
Differential Revision: https://developer.blender.org/D6328
Introduced a way to specify cloth pressure force influence with a vertex
group. This will allow users to only have pressure affect certain parts
of the mesh.
In addition to this, the "shrink factor" is now also unlocked to allow
negative values and thus allowing the cloth mesh to grow as well.
Reviewed By: Jaques Lucke
Differential Revision: http://developer.blender.org/D6347
Rigify uses a property group to contain options of its rigs, so
currently it is impossible to use Alt-Click or Copy To Selected
to change a setting for multiple rigs at the same time.
The main problem here is that there is no efficient way to find
which bone the property group belongs to. To maintain performance,
implement this by checking the active bone if it is known. Copy
Data Path and related features still don't work, as data path
calculation can't use context.
Differential Revision: https://developer.blender.org/D6264
The function armature_vert_task had a special case for Vertex Paints in Grease Pencil data. This patch
removes this special case. Not sure why it was needed in the first place.
Reviewed By: antoniov
Maniphest Tasks: T70378
Differential Revision: https://developer.blender.org/D6348
Now when change the setting the strokes are recalculated.
To do this, it was necessary to move the UV recalc to BKE module in order to share with Draw Engine. If the recalc it was done in draw engine, the factor was only calculated for evaluated version and there was a problem when draw a new sytroke.
Now, the RNA parameter recalc the original datablock instead of tag for be calculated in Draw Engine.
Fix for T72136: Bounding boxes were still drawn even with disabled
overlays. Also the outline displayed the original mesh
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6350
- Margins used duplicate define between files.
- Cursor selection ignored margins.
- Cursor wasn't scaling with DPI.
Add a 'draw_rect' member which is the region rect with margins applied
to make these checks clearer.
This resolves issue pointed out in D6300,
which complicated further refactoring.
To do this we do a half pixel offset in the normal direction.
However, we use the shading vertex normal instead of the geometric normal
(for speed) and this leads to imprecisions.
So we try to mitigate the common case and leave the corner cases as is.
Instead of relying on undefined behavior to discard the line, we put the
vertex at the camera origin so that interpolation does not produce any
fragment. We don't use FLT_MAX as it also gives unpredicatble results on
NVidia.
Stupid mistake, 'original' filepath is a blender-flavored one, with
potentially weird things like the '//' relative 'header'... This can
work on linux (also it could have broken in other places too), but on
windows that is fully invalid path and python `os.path` library just
generates empty result here.
Simply using proper valid path instead fixes it...
This Simplify and should also speedup the drawing a tiny bit.
We now discard the edges in the vertex shader by setting one of the verts
at vec4(0,0,0,0) to not produce any fragment
This is the unification of all overlays into one overlay engine as described in T65347.
I went over all the code making it more future proof with less hacks and removing old / not relevent parts.
Goals / Acheivements:
- Remove internal shader usage (only drw shaders)
- Remove viewportSize and viewportSizeInv and put them in gloabl ubo
- Fixed some drawing issues: Missing probe option and Missing Alt+B clipping of some shader
- Remove old (legacy) shaders dependancy (not using view UBO).
- Less shader variation (less compilation time at first load and less patching needed for vulkan)
- removed some geom shaders when I could
- Remove static e_data (except shaders storage where it is OK)
- Clear the way to fix some anoying limitations (dithered transparency, background image compositing etc...)
- Wireframe drawing now uses the same batching capabilities as workbench & eevee (indirect drawing).
- Reduced complexity, removed ~3000 Lines of code in draw (also removed a lot of unused shader in GPU).
- Post AA to avoid complexity and cost of MSAA.
Remaining issues:
- ~~Armature edits, overlay toggles, (... others?) are not refreshing viewport after AA is complete~~
- FXAA is not the best for wires, maybe investigate SMAA
- Maybe do something more temporally stable for AA.
- ~~Paint overlays are not working with AA.~~
- ~~infront objects are difficult to select.~~
- ~~the infront wires sometimes goes through they solid counterpart (missing clear maybe?) (toggle overlays on-off when using infront+wireframe overlay in solid shading)~~
Note: I made some decision to change slightly the appearance of some objects to simplify their drawing. Namely the empty arrows end (which is now hollow/wire) and distance points of the cameras/spots being done by lines.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6296
This is a revert of a small fraction of commit rB5e332fd700
that introduced the issue according to bisect.
Doing a break here is wrong, because BKE_crazyspace_build_sculpt
assumes that processing stopped at the first deform modifier
without deformMatrices, and thus skips all modifiers until it
finds one like that. Thus this early loop exit makes the behavior
worse, as instead of skipping just Mask and Mirror, it skips all.
Instead of having the option to show marker lines,
make the marker region optional.
- Added a Show Markers entry in the View menu of the animation editors.
- If the markers region is not active then the Marker menu gets hidden.
- Removed marker menu from the driver editor
and don't allow to use marker operators.
When the final stroke was smaller than original stroke, the weights array must be resized, but by error the function used the original stroke pointer instead of the new stroke pointer and this corrupted the pointers.
Loading a blendfile allocates one or more windows that need to be freed.
Freeing those windows also calls `BKE_workspace_instance_hook_free()` to
free workspaces. However, in the `BlendfileLoadingBaseTest` test there are
no workspaces allocated. This caused an assertion failure, which was worked
around by not asserting when Blender is running in background mode.
Reviewed by @Severin via pair programming
C++ is used more and more, and it is becoming more and more annoying to
keep track of whether header have C++ guard or not.
Is easier and more clear to be consistent in all headers and have such
guards in all headers.
There are no more 'layers' in Blender. I chose 'Visible Objects' rather
than 'Visible Collections' to be consistent with the other
'{Renderable,Selected} Objects Only' options.
No functional changes.
`AbcTransformWriter::hasAnimation` recently became smarter than just
returning `true`, but wasn't quite smart enough yet. Constraints are now
considered a source of 'animation'.
On CentOS 7, `tar --use-compress-program='xz -9'` tries to run `xz -9` as
executable, rather than running `xz` with `-9` as argument. Passing the
`-9` option via the `XZ_OPT` environment variable, as suggested by
@campbellbarton in D6138, works fine.
Previously some important features like OpenSubdiv were disabled by default,
which caused confusion.
The purpose of disabling some of these features was to avoid potentiall build
errors on Linux. But with precompiled libraries, install_deps.sh and better
library availability checking this is hopefully not much of a problem anymore.
This makes "make full" obsolete, but it's kept to not break docs or shell
scripts that people may have, and the .cmake config file remains useful to
modify an existing build folder.
This also changes some option to only be available on platforms where they
are actually supported (WITH_JACK, WITH_TBB_MALLOC_PROXY and X11 options).
Fixes T69742
Differential Revision: https://developer.blender.org/D6306
This new test class minimally sets up Blender so that it can load blend
files and construct a depsgraph without crashing.
Note that it hasn't been tested on very complex blend files, so it may
still crash when the loaded blend file references/requires uninitialised
data structures.
The test will certainly crash with Blend files created with Blender
older than 2.80, as the versioning code requires space types to be
registered. This is normally done by initialising the window manager,
which is not done in this test. The WM requires Python to run, which in
turn requires that Blender finds the release directory in the same
directory that contains the running executable, which is not the case
for GTest tests (they are written to `bin/tests/executablename`.
Reviewed By: sergey, mont29
Differential Revision: https://developer.blender.org/D6246
When encountering an error during context creation, the "OptiXDevice" constructor aborts early.
This means the "cuda_stream" vector is never resized and the destructor iterated over non-existent data.
Logic for registering and checking properties of registrable classes was
broken, allowing to ignore some errors.
Recent fix rBeb798de101a `broke` the result of the
pyapi_idprop_datablock test, because previously that test would fail
(i.e. suceed, as it is an 'expected to break test') for a reason it was
not designed to check.
This is the problem with that kind of tests - you cannot really check
that they are failing on the expected reason(s)...
The acceleration structure built by OptiX may be different between GPUs, so cannot assume the memory size is the same for all.
This fixes that by moving the memory management for all OptiX acceleration structures into the responsibility of each device (was already the case for BLAS previously, now for TLAS too).
xz compresses 25% better than bz2, reducing download times and server load.
The numbers:
blender-2.80-linux-glibc217-x86_64.tar.bz2 (release): 134 886 174 bytes
with xz: 96 181 604 bytes (-28.7%)
with xz -9: 93 871 548 bytes (-30.4%)
blender-2.81-7c1fbe24ca33-linux-glibc217-x86_64.tar.bz2 (beta): 173 600 363 bytes
with xz: 133 100 664 bytes (-23.3%)
with xz -9: 129 534 124 bytes (-25.4%)
xz also decompresses more than twice as fast as bz2, however compression needs
four times as long (on my 7-year-old laptop 3-4 minutes instead of <1).
Also xz has become more common than bz2, e.g. Debian/Ubuntu deb packages have
been xz-compressed for years, so the dpkg package manager as well as systemd
and grub all depend on liblzma being present, whereas bz2 is becoming more and
more optional.
Current Linux archives also include the UID/GID of whatever user account
happens to be used for building by the blender.org infrastructure. If someone
then installs these archives as root e.g. to /usr/local/... and doesn't pay
full attention the files remain owned by a regular user, which is a serious
security issue. This patch fixes that by setting the UID/GID to 0.
Differential Revision: https://developer.blender.org/D6138
This patch will allow the user to select the EEVEE renderpass to be
shown in the viewport by default the combined pass will be shown.
Limitations:
* Viewport rendering stores the result in a `RenderResult`. RenderResult
is not aware of the type of data it holds. In many places where RenderResult
is used it is assumed that it stores a combined pass and the display+view
transform are applied.
I will propose to fix this in a future patch. But that is still being
designed and discussed.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6319
The Principled BSDF uses Microfacet closures that include a fresnel term,
which are a special case since their weight tends to be near white even
if their average contribution is fairly low.
The sample weight is scaled by the average fresnel weight to account for
this, but the denoising albedo still used the unscaled weight.
This was fine for the original denoiser, but apparently OIDN can't handle
the resulting albedo pass well. Therefore, this commit adds the described
scaling to the albedo pass contribution as well.
This problem was described in T69770.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6289
This was an old bug which could be caused by saving after separating.
Changes from 79b703bb63 made this fail reliably.
Update shape key indices when they may be used again later.
Simple fix, to mimic what we had pre-local collections. So this is not
fully representative of the current load of the scene.
I started a more complex route where we literally just count objects
that are visible (taking object type restriction, local collections,
local view, ...). But in the end it is a bit overkill considering that
we have plans to change the statistics.
This adds support to the current sculpt sample detail operator to sample
a voxel size for the voxel remesher when sculpting on regular meshes.
It provides an approximation of a voxel size that is going to preserve
the sampled sculpt details after remeshing. It is not going to be 100%
accurate in all cases as it relies on having consistent edge length in
the whole sculpt, but it saves a lot of time and avoids guessing the
voxel size by trying different values.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6251
The relation between the pressure/size and the pressure/alpha is a
fundamental property that defines the behavior of a brush, so it does
not make sense to have it unified across all brushes. This applies both
for sculpting and painting.
Some of the new 2.82 brushes need pressure/size or pressure/alpha to be
enabled to work propely, while others don't. Users should not be
switching on and off this property manually when changing brushes if they
want to use unified size. This is also causing that some users are using
the brushes with an incorrect configuration.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6291
After this commit it should be possible to share the same deformation
formulas that are used in the Elastic Deform brush with other areas of
Blender such as Grease Pencil or proportional editing.
This also removes a lot of code from sculpt.c that is not direclty
related to sculpting.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6281
This removes all multires code from the smooth brush and replaces it
with a new implementation that uses the sculpt mesh API. This makes the
code much easier to understand and maintain.
We could unify all the smooth brushes into a single implementation, but
mesh smoothing has code to deal with open boundaries that I don't want
to remove yet.
Most bugs and artifacts related to access neighbor grids should be fixed
(like T71667). This also fixes performance bugs such as T70689, that were
related to grid stitching after applying the brush.
Reviewed By: jbakker
Maniphest Tasks: T71667
Differential Revision: https://developer.blender.org/D6277
We are now modifying the relation between pressure and radius using
custom functions to improve the brushes, but dyntopo was not prepared
for this. This fix sends the unmodified radius to dyntopo so it modifies
the geometry correctly.
Reviewed By: jbakker
Maniphest Tasks: T71868
Differential Revision: https://developer.blender.org/D6299
BIF_gl.h included hacks like redefining glew functions and a constant.
The named constant `GLA_PIXEL_OFS` has been moved to `GPU_viewport.h`
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5860
Small performance improvements by caching the world_ubo in the World.
It was detected that NVIDIA driver created threads to update the
world_ubo (304 bytes). This patch will reuse the previous created
ubo when not changed.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6087
Extend options are currently stored per curve. This was not clearly
communicated to the user and they expected this to be a setting per
CurveMapping.
This change will move the option from `Curve` to `CurveMapping`. In
order to support this the API had to be changed.
BPY: CurveMap.evaluate is also moved to CurveMapping.evaluate what
breaks Python API. Cycles has been updated but other add-ons have
not. After release of 2.81 we can merge this to master and adapt
the add-ons.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D6169
As a followup to rB6f4e595e9ba9 and as per @campbellbarton suggestion,
this adds EDBM_selectmode_disable_multi, similar to
EDBM_mesh_deselect_all_multi & EDBM_mesh_deselect_all, so other similar
uses don't need to be done in a loop.
Also, selected_objects isn't a reliable way to handle this case - since
objects can be in edit-mode & not selected, use
BKE_view_layer_array_from_bases_in_edit_mode_unique_data instead
Differential Revision: https://developer.blender.org/D6317
When doing viewport rendering the color management happens on the CPU.
This has overhead in downloading a float texture from the gpu and
performing color management on the CPU.
Based on the scene fileformat bit depth the result will be rendered to
a byte texture where the colormanagement happens on the GPU or a float
texture where the colormanagement happens on the CPU.
This is only done during `Viewport Render Animation` in other
cases a float texture is being used.
Baseline (HD render of wanderer.blend workbench engine no samples) 15.688038 s
After changes: 9.412880s
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6195
Most of the renderpasses in EEVEE used post-processing on the CPU. For
final image rendering this is sufficient, but when we want to display
the data to the user we don't want to transfer to the CPU to do post
processing to then upload it back to the GPU to display the result.
This patch moves the renderpass postprocessing to a GLSL shader.
This is the first step to do, before we will enable the renderpasses in the viewport.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6206
When rendering the Subsurface scattering lighting render layer with high
sample count render artifacts can appear. This patch will remove these
render artifacts by using a more precise texture format when samples
will be larger than 128. As with the new eevee-shadows it is more common
to use higher number of samples.
The reason why it was visible in the subsurface scattering is that every
sample could change the color. Adding different values will reduce
precision over the number of samples.
The subsurface color render layer also has this issue, but it is not noticeable as
the colors tend to be close to each other so the colors would
most of the time just shift the precision and hold up better.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6245
This adds some basic simulation of internal air pressure inside of
closed cloth mesh objects.
Reviewed By: Jacques Lucke
Differential Revision: http://developer.blender.org/D5473
We still had a few deprecated assignements of `bpy.props.xxx` to class
members in our API documentation and one of our py tests. Annotations
are to be used now.
Also remove the section about `register_module` utils, this has been
removed in 2.8.
Fix T71877: Python API overview sample code warning: class MyMaterialProps contains a property which should be an annotation!
Fix T71876: Python API overview references old bpy.utils.register_module function
Caused by rBeead6a604602.
Above commit didnt account for different element types being tagged (face
select mode tagged faces, others tagged loops) and always flushed from
loops.
Now restore to flush from faces if we are in face select mode.
Maniphest Tasks: T71864
Differential Revision: https://developer.blender.org/D6315
When you create a new Brush, the user count is `2` (caller and fake user). The problem is when you duplicate a Brush, the user count grows to `3` and this is not correct, because is a new brush.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D6310
The Random Per Island attribute is a random float associated with each
connected component (island) of the mesh. It is particularly useful
when artists want to add variations to meshes composed of separate
units. Like tree leaves created using particle systems, wood planks
created using array modifiers, or abstract splines created using AN.
Reviewed By: Sergey Sharybin, Jacques Lucke
Differential Revision: https://developer.blender.org/D6154
Improve laggy performance while moving File Browser by not refreshing fsMenu lists in its init.
Differential Revision: https://developer.blender.org/D6112
Reviewed by Bastien Montagne
This was added years ago to prepare for code-signing the executable
but was never used, buildbots use a different mechanism now to sign
so no need to keep this around.
This function exposes the already-existing static `object_moves_in_time()`
function, and optionally recursively checks the parent object for
animatedness as well.
I also added checking `AnimData::overrides` to
`BKE_animdata_id_is_animated()`. This ensures that, apart from the optional
recursion to the parent object, the function has the same functionality.
Instead of always writing the transform on every frame, it's now checked
whether the object is animated at all. This could be made stricter to
reduce false positives, for example by checking FCurves and drivers to
see whether translation/rotation/scale is animated. However, this
approach is already better than the `return true` we had before.
This commit adds the BKE_animdata_id_is_animated(id) function, which
returns true if the ID datablock has non-empty animation data. This is
determined by checking the the active action's fcurves, the drivers, and
NLA tracks.
The function isn't used anywhere, and it's deceptively returning false
negatives. For example, `modifier_dependsOnTime()` will return `false`
for hook modifiers, even when the hook target is animated. Querying the
depsgraph for dependency on the time source would be a better approach.
The `modifiers_getVirtualModifierList()` function previously took a non-
const `Object *ob` parameter, preventing it from being called from more
restrictive functions. Since the function doesn't modify the passed
object, it could easily be made const.
No functional changes.
Unfortunately, it didn't turn out to be as great as I've hoped to it
will.
The issue is: the label eats too much space, making selector buttons
and image name to be barely readable. Initial idea of making the panel
somewhat wider didn't work either: due to the sizing policy of label
it takes a lot of panel width to make image name readable.
This code allows to push a set of different operations all based on
iterations over a range of indices, and then process them all at once
over multiple threads.
This commit also adds unit tests for both old un-pooled, and new pooled
task_parallel_range family of functions, as well as some basic
performances tests.
This is mainly interesting for relatively low amount of individual
tasks, as expected.
E.g. performance tests on a 32 threads machine, for a set of 10
different tasks, shows following improvements when using pooled version
instead of ten sequential calls to BLI_task_parallel_range():
| Num Items | Sequential | Pooled | Speed-up |
| --------- | ---------- | ------- | -------- |
| 10K | 365 us | 138 us | 2.5 x |
| 100K | 877 us | 530 us | 1.66 x |
| 1000K | 5521 us | 4625 us | 1.25 x |
Differential Revision: https://developer.blender.org/D6189
Note: Compared to previous commit yesterday, this reworks atomic handling in
parallel iter code, and fixes a dummy double-free bug.
Now we should only use the two critical values for synchronization from
atomic calls results, which is the proper way to do things.
Reading a value after an atomic operation does not guarantee you will
get the latest value in all cases (especially on Windows release builds
it seems).
By error, the original datablock was used while rendering. Actually, only while the user is drawing the original data must be used because when we tested, the time the system uses to copy the datablock created a very bad "lag" feeling while drawing. Maybe the lag was half second only, but it ruined the pencil feeling.
I talked some time ago with Sergey about that and we decided use this approach.
Now, only the original datablock is used while the user is "moving" the pen, but not in any other situation.
Thanks @sergey for help me with this bug and sorry for thinking it was a depsgraph issue.
The new Mapping node was missing versioning code for drivers.
This patch refactors existing code and add versioning for drivers.
Reviewed By: Sergey Sharybin, Bastien Montagne
Differential Revision: https://developer.blender.org/D6302
Adds a `text` parameter to `bpy.types.uiLayout.template_ID()` which
causes a label to be added, as usual. Adding the label also makes the
template respect the `bpy.types.uiLayout.use_property_split` option.
Also fixes wrong layout being used in the template-ID, although I think
that didn't cause issues in practice.
Sergey requested this for usage in the Movie Clip Editor.
Calling "OptiXDevice::load_kernels" multiple times would call "optixPipelineDestroy" on a pipeline
pointer that may have already been deleted previously (since the PIP_SHADER_EVAL pipeline is only
created conditionally).
This change also avoids a CUDA kernel reload every time this is called. The CUDA kernels are
precompiled and don't change, so there is no need to reload them every time.
Adds a theme setting to specify color of widget text insertion cursor (caret).
Differential Revision: https://developer.blender.org/D6024
Reviewed by Campbell Barton
This code allows to push a set of different operations all based on
iterations over a range of indices, and then process them all at once
over multiple threads.
This commit also adds unit tests for both old un-pooled, and new pooled
`task_parallel_range` family of functions, as well as some basic
performances tests.
This is mainly interesting for relatively low amount of individual
tasks, as expected.
E.g. performance tests on a 32 threads machine, for a set of 10
different tasks, shows following improvements when using pooled version
instead of ten sequential calls to `BLI_task_parallel_range()`:
| Num Items | Sequential | Pooled | Speed-up |
| --------- | ---------- | ------- | -------- |
| 10K | 365 us | 138 us | 2.5 x |
| 100K | 877 us | 530 us | 1.66 x |
| 1000K | 5521 us | 4625 us | 1.25 x |
Differential Revision: https://developer.blender.org/D6189
When scrollbars were redesigned, the size of UI-List scrollbars wasn't
updated. Those were still huge.
This makes their size consistent with other scrollbars and frankly,
non-rediculous.
Add smooth scrolling support for vertical scrolling.
This is only active while scrolling so we don't need to support
pixel-level offsets for operators, interactions.
TBBMalloc seems to have a race condition somewhere on shutdown
that seems to show up in debug builds only, ideally we find the
issue and send a patch upstream but due to its racy nature it
has eluded capture so far. This patch disables TBBMalloc for
debug builds so that developers that actually need to get some
work done can work without being bothered by this misbehaviour.
This implements a 5th-order equation smoothstep, which produces a flat
surface at the brush center. Some users find that our current grab brush
is too sharp, so now we have both options.
This also improves the behavior of the new clay brushes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6265
The OptiX intersection program for curves uses "optixGetObjectRayDirection"
to get the ray direction in object space (which was inverse transformed
with the current transformation matrix). OptiX does no additional operations
on it, so if there is a scaling transform, the direction is not normalized.
But the curve intersection routine expects that. In addition, the distances
used in "optixGetRayTmax()" and "optixReportIntersection()" are in world
space, so need to adjust them accordingly.
When introducing "drag-all-selected" support all over Blender, we
figured this wouldn't work well with the Graph Editor
selection/transform behavior.
Hence, William and I worked on the following changes, although we used
this chance to improve the behavior in general too.
For more info see T70634.
* Handles now always move with the key, regardless if they are selected
or not.
* Selecting the key doesn't select the handles anymore, their selection
is separate.
* Multiple keys and handles can now be dragged.
* Dragging a handle moves all selected handles **on the same side**.
* Tweak-dragging any handle can never affect any keyframe location,
only handles.
* G/R/S should behave as before.
* Changing the handle type with a key selected always applies the change
to both handles.
* Box selection with Ctrl+Drag now allows deselecting handles (used to
act on entire triple only).
* Box selection //Include Handles// option now only acts on visible
handles, wasn't the case with Only Selected Keyframes Handles enabled.
* Box selection //Include Handles// is now enabled by default in all
bundled keymaps.
The changes have been tested for some days by the animators here in the
Blender Animation Studio. Some changes are based on their feedback.
Also, this improves/adds comments for related code.
Differential Revision: https://developer.blender.org/D6235
Reviewed by: Sybren Stüvel, William Reynish
`BLI_strncpy_wchar_from_utf8` internally assumes `wchar_t` is 32 bits
which is not the case on windows.
The solution is to replace `wchar_t` with `char32_t`.
Thanks to @robbott for compatibility on macOS.
Differential Revision: https://developer.blender.org/D6198
It is possible to have action which is not nullptr but which have no
f-curves in it (for example, animate cube's location, then delete all
f-curves).
Such situation should not add time dependency as it could slow down
scene evaluation on frame change.
Diffing on undo steps is a critical performance point of override
system, although not required for override itself, it gives user
immediate feedback ove what is overridden.
Profiling showed that rna path text search over overrides operations was
by far the most costly thing here, so now using a runtime temp ghash
mapping for this search instead.
Seems to give at least 5 times speedup on big production rig.
Only indent when there aren't characters before the cursor.
This resolves the conflict with Ctrl-Space for view maximize.
D6239 by @wbrbr for text editor, based console support on this.
Previously the only way to draw polygon shapes from buttons
was to use a polygon that included the circular outline
with negative space for the un-filled areas.
This didn't always have visibility, especially when the gizmo was
overlaying colors that didn't contrast much.
Support drawing a generic backdrop with a polygon shape over it.
After adding normal radius, the main use of the Scrape brush is to create flat surfaces with sharp edges. In that case, it does not make sense to have our current "Peaks" version of the brush as its inverted version.
The correct inverted version of Scrape for this use case is the Fill brush. This way you can use this tool to crease both concave and convex sharp edges and to fix the artifacts one version produces with its inverted version.
I think we should merge these two tools into one, but for now, this solution keeps compatibility with the old behavior.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6022
This commit implements the Topology Slide/Relax brush and the Relax mesh filter.
These tools are designed to move the topology on top of the mesh without affecting the volume.
The Topology Slide/Relax brush slides the topology of the mesh in the direction of the stroke. When pressing shift, it has an alternative smooth mode similar to the Relax Brush in the sculpt branch. It should be way more stable and produce fewer artifacts.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6059
The smooth iterations of the pose factor were hardcoded to 4. This works fine in most situations when you are posing a low poly mesh, which is the main use case of this tool. I added the smooth iterations as a brush property in case you need to pose a high poly mesh directly without producing artifacts.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6157
This operator is similar to Mask Extract, but it deletes the masked points on the original mesh and fills the holes. This can be useful for quickly trimming or splitting an object.
This is not meant to be the main trimming tool of sculpt mode. I plan to have a set of trimming tools based on geometry booleans (trim box, lasso, line, bisect...) but in some cases doing a mask selection is more convenient.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6160
The Multiplane Scrape brush creates sharp edges with a given fixed angle by trimming the mesh with two planes in local space at the same time. When working with stylized or hard surface models, this brush produces way better results and is more predictable than any other crease/flatten brush based on curves and alphas.
It is also the first brush we have than can produce hard surface concave creases.
The Multiplane Scrape Brush also has a dynamic mode where it samples the surface to fit the angle and scrape planes during a stroke. With this mode enabled you can sculpt multiple times over the same edge without creating artifacts.
It can also create creases that change between concave and convex during the same stroke.
The behavior of this brush will improve after merging patches like D5993 and its behavior in concave creases can still be improved, so I will keep tweaking its parameters and default values once we have all brush properties available.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6174
Implement one more way of inheriting scale from the parent
bone, as an addition to the choices introduced in D5588.
This new mode inherits parent scale as if the parent and child
were not rotated relative to each other, always applying parent
X scale to child X scale and so forth. It is quite natural for
connected bone chains with coherent roll, like limbs or tentacles,
falling roughly between Average and Fix Shear in how closely
the parent scaling is followed.
Currently this can be achieved by using Inherit Scale: None plus
a Copy Scale with Offset from parent on the child; however, this
is cumbersome, and loses the distinction between true local and
inherited scale in the child's Local space.
This new mode also matches how the Before/After Original mix
modes work in the Copy Transforms constraint.
On the technical side this mode requires adding a right side
scale matrix multiplication into the Local<->Pose conversion,
in addition to the existing two left side matrices used for
location and orientation.
Differential Revision: https://developer.blender.org/D6099
After refactoring the mirror modifier and supporting geometry modifications with PBVH_FACES this operator can be easily implemented without Dyntopo.
i
The symmetrize button and options are still in the Dyntopo pannel. There are patches like doing multiple modifications in the Sculpt mode UI, so we need to find a way to organize this better.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6180
The previous Clay brush was similar to flatten. Now it has a different plane calculation and falloff, based on the position of the vertices before deforming them, so it feels more like adding clay to the model.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6228
By squaring the pen pressure and disabling BRUSH_SPACE_ATTEN the brush
feels like it has a bigger strength range, wich makes it easier to
control when applying less pressure in order to smooth sculpted
surfaces.
Each brush should have a custom input pressure curve by default to get
an optimal behaviour and make all brushes consistent, but that is going
to take some time to get it right.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6214
Dash Ratio and Dash Samples are brush properties to modify the strength of the brush during a stroke. This is useful to create dashed lines in texture paint or stitches in sculpt mode.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D5949
Caused by rBac442da4a14d.
Above commit tweaked the logic to not only early out, but also set the
WPGradient_vertStore screen coord to FLT_MAX in case this original index
was visited before [gradientVertInit__mapFunc].
For generative modifiers though, we might get here multiple times for the
same orig index, resulting in a valid orig index being made invalid for
gradientVertUpdate__mapFunc [which would early out in case of FLT_MAX].
Restored original logic, so that setting FLT_MAX only really happens
when it should: when ED_view3d_project_float_object fails...
Maniphest Tasks: T68499
Differential Revision: https://developer.blender.org/D6282
Keyframes) takes hidden keys into account when calculating zoom
Note that with the 'View Only Selected Curve Keyframes' option enabled,
it is also possible to select [box/circle/lasso] hidden/non-visible
keyframes. Think this should never happen, but that is for a later
commit (along some deduplication of animdata filtering code)
Reviewed By: Severin, Sybren
Maniphest Tasks: T67873
Differential Revision: https://developer.blender.org/D6237
Previously these used a gizmo to redo the operator however this
complicated having on-screen gizmos to access tools (see T66304).
Replace this with a generic way to make an operator that only has an
execute function into a modal operator.
This is used for smooth and randomize tools.
Unlike operator gestures, this handles storing and resetting the data.
Currently this only handles edit-mode data, however it's can be
extended to other kinds of data.
Removed the weight limit and made the setting more clear in what it actually does.
IE, it controlls the weight of the vertices of the cloth mesh
Reviewed By: Brecht
Differential Revision: http://developer.blender.org/D5450
Dynamically bound mesh deform modifiers failed to update the viewport on
object transformation of deformer. The TODO by Sergey, which suggested
adding the transform component to the depsgraph, was already there, and
worked to fix T71412.
Due to some floating point errors the last frame of a VSE audio strip can
cause integer overflow and crash Blender. This overflow was caused by a
cast from `int64_t` to `int` without prior check. The crash is fixed by
keeping the variable as `int64_t` for as long as possible.
Custom profiles in bevel allows the profile curve to be controlled by
manually placed control points. Orientation is regularized along
groups of edges, and the 'pipe case' is updated. This commit includes
many updates to comments and changed variable names as well.
A 'cutoff' vertex mesh method is added to bevel in addition to the
existing grid fill option for replacing vertices.
The UI of the bevel modifier and tool are updated and unified.
Also, a 'CurveProfile' widget is added to BKE for defining the profile
in the interface, which may be useful in other situations.
Many thanks to Howard, my mentor for this GSoC project.
Reviewers: howardt, campbellbarton
Differential Revision: https://developer.blender.org/D5516
Various small changes to Text Editor, mostly to do with scaling, alignment, and theme support.
Differential Revision: https://developer.blender.org/D6268
Reviewed by Campbell Barton
The Alembic file metadata object was created in one place, a bit of
metadata was added, then it was passed along with other properties which
were then injected as metadata in another function. This is now cleaned up.
No functional changes.
Alembic 1.7.12 introduces a 'DCC FPS' hint, allowing Blender to write
the scene frame rate to the Alembic file. This will make it possible for
importers and converters to properly deal with situations where 'frame
number' is the only reference to time.
Writing this new DCC FPS hint will be done in a separate commit. Here
only the Alembic library is upgraded from 1.7.8 to 1.7.12.
The issue was actually in Python extras (where it shows the ENUM option).
I got a bit distracted by the "(undocumented operator)" message.
It made me miss the missing ENUM once the crash was gone.
For the make single user operation to work we expect a parent of the
datablock to be around. However this is often not the case when not
accessing the data from Scenes or Viewlayer display modes.
For now we simply not show them in the other cases. They can be added
later though, by testing the outliner tree parent compatibility with the
expected parent id.
Fix T71673
Differential Revision: https://developer.blender.org/D6276
Ensure that all threads on a multi-core system are used.
The issue was that BLI_task module was trying to be smart and
used heuristic to find optimal number of iterations per thread.
This heuristic assumes that tasks are light-weight, which is
not a case for subdivision surface.
On a higher subdivision level with a file from T70826 the
evaluation time goes down from 0.25 to 0.17 seconds per modifier
evaluation.
When D6189 is finalized we can being some extra performance
improvement.
Usage of spinlock during heavy IO gave reduced performance
see D6267 for details.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D6267
We have no dedicated image context tab, so for now making sure we don't
end up passing its ID as the pinned one.
If we ever get one, we then will need a different solution here, like
changing the ID that owns the data to be the object, instead of the
empty image datablock.
Differential Revision: https://developer.blender.org/D6273
rBc6cbcf83d015 caused to early out e.g when not all faces were selected
(but surrounding faces were, so implicitly all vertices were selected).
Now take (mixed also) selection mode into account.
Maniphest Tasks: T71554
Differential Revision: https://developer.blender.org/D6254
The CANCELLED return value from an operator is intended for
signaling that the operator aborted execution without changing
anything, and an Undo stack entry should not be created.
When a Python operator crashes, it is not safe to assume that
it did nothing, so it should interpret it as FINISHED instead.
Otherwise, the undo system behavior after an operator failure
feels broken.
Differential Revision: https://developer.blender.org/D6241
Rename and separate Layers and Materials Specials menu from other buttons for better consistency
Reviewed By: antoniov
Differential Revision: https://developer.blender.org/D6271
Was caused by "wrong" EOL characters used in the patch: the file is
actuallyu saved using CRLF EOL style.
The patch was using CRLF as well for until recent change in the C
runtime.
This commit adds a new command line argument --debug-ghost and
makes it so X11 errors happening during context initialization
are only printed when this new flag is sued.
There is no need to flood users with errors when their GPU is
not supporting latest OpenGL version. Or, at a very minimum,
the error must be more meaning full.
Differential Revision: https://developer.blender.org/D6057
In order to recover from a transient Focus Out - Focus In disruption
in the middle of a shortcut, which can be caused by certain window
managers, Blender has code that checks which modifier keys are pressed
after Focus In and restores the modifier state based on that.
If one of the Ctrl, Shift, Alt, Super keys is not mapped anywhere
in the active keyboard layout, XKeysymToKeycode returns the invalid
zero keycode, and reading the key state produces garbage, which can
cause an invalid modifier state. Check the return value to avoid this.
2.79 also did this [select the new instances] which was useful.
2.79 also kept the instancer selected [this patch deselects]
Reviewed By: mont29
Maniphest Tasks: T68191
Differential Revision: https://developer.blender.org/D6233
Some types were documented in bpy.types aren't accessible there.
For now, disable documenting types from add-ons and some types from
bl_operators, bl_ui... since these are mostly for internal use.
`WS_CHILD` is a different kind of child window that what we define as
child window. See http://forums.codeguru.com/showthread.php?491604.
Setting this style flag seems to mess things up a bit in our
configuration. The name bar is actually being overlapped by the Windows
task bar then. Not totally sure why this happens, but I think it's
because windows with the `WS_CHILD` style are positioned relative to the
parent, not the desktop (screen without taskbar). So it uses the full
space available when maximized, which isn't clipped by the taskbar
anymore.
This only frees brush_rng and random_tex_array when they were actually
previously allocated.
In a unit test (see D6246) I want to be able to partially start Blender
so that I can load a blend file. To prevent memory leaks, I also want to
be able to release memory, which currently requires calling
`BKE_blender_free()`. This unconditionally calls `RE_texture_rng_exit()`
and `BKE_brush_system_exit()`, which now crash on freeing `NULL`. This
patch fixes that.
Allocation (`BKE_brush_system_init()`) and freeing
(`BKE_brush_system_exit()`) are done asymmetrically. The allocation
functions are called from `main()` in the creator module, but the
freeing is done by `BKE_blender_free()` the Window Manager. Ideally we
symmetrise this and initialise Blender from outside the window manager
(so that the initialisation can be done without WM and Python too), but
for now I'm happy when things don't crash.
Reviewed by: sergey via pair programming
The render view window was never closed actually, just moved behind the
main window. It's properly closed now.
It should also behave more like expected when there already is a
temporary window open (e.g. Preferences).
This patch includes a modifiers that developed for NPR rendering.
- MultiStroke modifier that generates multiple strokes around the original ones.
Differential Revision: https://developer.blender.org/D5795
The script requires Python 3.7 as a very minimum, and CentOS is
only 3.6.
On macOC there was an access to a None object, due to missing
implementation of code signer on this platform.
This commit includes all changes listed in T71366 except for the 2 column toolbar layout.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6225
When using OpenCL with Cycles the rendering time increased substantial.
After doing some tests the bottleneck was found in 4d voronoi and 2d and
3d smooth voronoi.
This change will hide these behind a specific compile directive so the
speed will improve.
AMD RX480 + BMW scene
2.80 (3:10)
2.81 (5:48)
2.81 excluding 4d voronoi+2d/3d smooth (3:50)
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D6231
The root of the issue goes to the discontinuity between the way how
mesh_calc_modifiers() and BKE_sculpt_multires_active() works.
At some point detection of original data usage by a modifier got
broken: the mesh_final based check is unreliable because deform-only
modifiers will create mesh_final for the connectivity information.
This made it so modifier stack evaluation would skip multires
evaluation, but the sculpt code will assume the multires is properly
applied.
This change makes it an explicit check about whether there are any
non-deform-only modifiers applied.
Pair programming and review together with Bastien, thanks!
There was a discontinuity between how deform-only modifiers are applied
for the case when result deform mesh is requested and when it is not.
Namely, the input mesh will always be guaranteed to present in the
former case, but not in the latter.
This change makes it so input mesh to deform-only modifiers is always
at consistent state.
Pair programming and review together with Bastien, thanks!
This changes integrates code signing steps into a buildbot worker
process.
The configuration requires having a separate machine running with
a shared folder access between the signing machine and worker machine.
Actual signing is happening as a "POST-INSTALL" script run by CMake,
which allows to sign any binary which ends up in the final bundle.
Additionally, such way allows to avoid signing binaries in the build
folder (if we were signing as a built process, which iwas another
alternative).
Such complexity is needed on platforms which are using CPack to
generate final bundle: CPack runs INSTALL target into its own location,
so it is useless to run signing on a folder which is considered INSTALL
by the buildbot worker.
There is a signing script which can be used as a standalone tool,
making it possible to hook up signing for macOS's bundler.
There is a dummy Linux signer implementation, which can be activated
by returning True from mock_codesign in linux_code_signer.py.
Main purpose of this signer is to give an ability to develop the
scripts on Linux environment, without going to Windows VM.
The code is based on D6036 from Nathan Letwory.
Differential Revision: https://developer.blender.org/D6216
The heap on windows is single threaded causing it to lag behind linux in performance in allocation heavy multithreaded scenarios, BVH building is a prime example.
See https://developer.blender.org/D6218 for benchmark results
for testing with the allocator enabled/disabled you can set the environment variable TBB_MALLOC_DISABLE_REPLACEMENT=1 to disable the TBB allocator.
Reviewed By: @sergey
Differential Revision: https://developer.blender.org/D6218
Makes it so compilation doesn't fail when the SVN updating
stumbles upon checkout which doesn't have correspondence in
a tag, but which isn't so risky as previous change.
This reverts commit 8e9e58895b.
The change broke behavior when typing `make update` from the root of
the sources: tests folder wouldn't be updated anymore.
Getting quite close to release now, so will revert to a safer change.
The issue was rooting to the fact that the script was iterating into
every directory inside of blender.git/../lib/ and attempted to switch
them to the desired path. This doesn't work in an environment where
both master and release branch are built (or any environment where
non-needed SVN directories are not automatically removed).
This change makes it so script explicitly generates a list of
directories which are required for the build. For example, the script
now stores an exact folder with ABI such as win64_vc14.
Only those explicitly listed directories will be updated.
This allows to:
- Solve compilation failure of 2.81 branch after checkout for
win64_vc15 libraries has been created.
- Fail compilation if actually expected tag is missing (for example,
when trying to build release branch prior to libraries tag).
Now, there was a confusing logic about possible .svn folder in
lib_dirpath (effectively, blender.git/../lib/.svn) which is not
something what is supposed to happen with the setup of buildbot we are
using for quite some time now. This logic has been removed now.
This change includes old-style string format(), mainly because it is
not know that the buidlbot scripts are run using python3 on CentOS
builder.
Differential Revision: https://developer.blender.org/D6230
For `Particle Properties -> Viewport Display -> Display As` set to
circle/cross/axis, particle instances are associated with a single
resource handle (and, in particular, a single model matrix), so define
`IN_PLACE_INSTANCES` to get the right index for `ModelMatrix` and
`ModelInverseMatrix` in the shader.
Differential Revision: https://developer.blender.org/D6220
Open the file browser sidebar by default when adding Movie/Sound/Image Sequence Strips, to show the operator options.
Differential Revision: https://developer.blender.org/D6212
Reviewed by: William Reynish, Julian Eisel
This caused T71483.
Having timeline and dopesheet merged in 2.8 makes using S/E keys in timeline not work well.
2.7x keymap needs to fit with 2.8x internals, so probably 2.7x keymap will have to live with Ctrl+Home / Ctrl+End here.
This reverts commit 4fbcbbfb96.
As correctly pointed out by a comment in the code, adding
new springs wasn't thread safe, and caused crashes.
Fix by buffering new springs in intermediate thread-local
arrays, which are flushed on the main thread. This is valid
because the new springs are not used until the next sim step.
Differential Revision: https://developer.blender.org/D6133
Fixes alignment issues on Graph Editor menus used to insert keyframes.
Differential Revision: https://developer.blender.org/D6213
Reviewed by Campbell Barton
Very stupid mistake in own new generic ID lib_link function, that would try
to link ID pointers for all data-blocks, not only those actually needing it.
Usually Ctrl+C copies the operator name to the clipboard
["bpy.ops.material.new()", "bpy.ops.object.material_slot_remove()"]
Crash happens for all buttons of UI_BTYPE_BUT without associated
operator [some are defined with callbacks only, often these are created
with e.g uiDefIconBut (instead of e.g. uiDefIconButO)]
Other examples that crash with Ctrl+C:
- animation decorators next to animatable properties
- button to show a modifier texture in the texture tab
- ...
2.79 survived here (result in the clipboard was just not changed hitting
Ctrl+C on these buttons), this is what happens with this patch as well.
Maniphest Tasks: T71405
Differential Revision: https://developer.blender.org/D6208
'is_copy' was not set correctly on all uiButMultiState (it was done once
for uiHandleButtonData), resulting in 'delta' being used on some indices
of the array and not others in `ui_selectcontext_apply`.
Maniphest Tasks: T55632
Differential Revision: https://developer.blender.org/D6201
Experimental tab in User Preferences for experimental features.
The tab option is only visible when "Developer Extras" is on.
Included here is a (commented out) example panel to be used as a
template for the new experimental panels. Since these panels will come
and go it is nice to have a reference in the code.
Differential Revision: https://developer.blender.org/D6203
Most of the time Stretch To is used in actual rigs, like BlenRig
or Rigify, in combination with Damped Track to handle rotation
before the stretch, because it produces rotations more appropriate
for organic deformation, and doesn't flip because of internal
gimbal lock.
The prevalence of this pattern suggests that Stretch To should
support that kind of rotation directly as an option.
Differential Revision: https://developer.blender.org/D6134
Combine computing `size` and normalizing the matrix, invert the
direction of `vec` to avoid negating it later, use `rescale_m4`
instead of matrix multiplication to scale the final result.
Differential Revision: https://developer.blender.org/D6134
We also need to rebuild the whole collection/viewlayer object cache
thing when we relink an objector collection in a collection (since it
might be part of a view layer).
Again, usual disclaimer about how inneficient this is currently, needs a
serious refactor to only tag caches as dirty, and actually rebuild the
whole thing on access.
This introduces object mode tagging for data which hasn't yet been
written back to the ID data.
Now when selecting other sculpt objects, the original objects data is
flushed back to the ID before writing a memfile undo step.
As reported by Clément Foucault. This is a small thing but since we
are refactoring the draw manager for the next blender is nice to
have it fully working before the refactor for comparison.
Note: Camera volume and render were both fine, the camera frame is the
one thing that was not working.
Also in toe-in the convergence plane is always facing the original
camera orientation. It is a known small annoyance.
This test should not be needed and the cause is unclear, but better to avoid
the crash. Possibly caused by files saved with development versions that had
different node type IDs.
Steps to recreate were:
* Open a Node Editor, add some nodes
* Save the file
* Select all nodes (A)
* Save it again, but with Ctrl+S
* Try to select an already selected node
It's supposed to deselect other nodes now, but for as long as the report
banner is shown in the status-bar ('Saved "foo.blend"'), this doesn't
work.
Also happened in the VSE, Dopesheet, NLA or everywhere else we recently
added drag-all-selected support to.
Issue was in there since 2.80. Basically the timer event sent by the
report banner broke assumptions in the selection operator.
Hope this fix doesn't have any side effects. Checked with Bastien
(initial author of this logic), but seems things are fine.
The AA offset should be substracted, not added. I think this was
introduced when I refactored the code in a code review.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6186
Should Fix T70326
This implements the shrinkwrap options suggested in D5933. I did a few
test and it seems much more stable than the previous options.
Reviewed By: jbakker
Maniphest Tasks: T70326
Differential Revision: https://developer.blender.org/D6176
The previous default was 1.7, so the brush was more stable on surface
normal changes, but softer. I don't think users expect this brush to be
that stable, so by using 1.55 we make the brush a little bit stronger on
curved surfaces by default.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6187
This wasn't an issue in the real buildbot environment since the
precompiled libraries are compiled with same ABI as the compiler
used for Blender build. But it was causing issues when building
Blender using buildbot scripts (for troubleshooting purposes)
on a machine with different default compiler ABI.
Usually ABI detection is happening in platform_unix.cmake when
detecting whether there are any precompiled libraries folder
available. This detection is not happening when library folder
is provided explicitly, expecting ABI to be setup explicitly
as well.
In 2011 special handling was introduced, apparently for no other
reason than to address a complaint in T25707 that World and Local
space are equivalent for objects without parent. This causes issues
and confusion, as mentioned in rB599c8a2c8e4.
This special meaning of Local Space is not documented in the manual,
and is not known to experienced riggers, so removing it should not
be a problem.
Differential Revision: https://developer.blender.org/D6095
This commit implements the change in behaviour described in T71246.
In short:
For export, per mesh:
- Custom loop normals are defined → loop normals are exported.
- One or more polys are marked flat → loop normals are exported.
- Otherwise, no normals are exported.
For import, when the Alembic mesh contains:
- loop normals (kFacevaryingScope) → use as custom loop normals, and
enble Auto Smooth to have Blender actually use them.
- vertex normals (kVertexScope or kVaryingScope) → convert to loop
normals, and handle as above.
- no normals → mark mesh as smooth.
- unsupported normal types (kConstantScope, kUniformScope,
kUnknownScope) → handle as 'no normals'.
This also fixes T71130: Alembic split normal export issue
Previously the mesh flag `ME_AUTOSMOOTH` was used in conjunction with
the poly flag `ME_SMOOTH` to determine whether loop normals or vertex
normals were exported. This behaviour was hard to predict for artists,
and hard to describe in the manual. Instead, Blender now only exports
loop normals, computing them if necessary. This way, the mesh in Alembic
should always have the same loop normals as in Blender.
Maniphest Tasks: T71130
Differential Revision: https://developer.blender.org/D6197
This computation is complex and useful enough to expose the existing
C math utility used by BVH nearest to Python. Otherwise this requires
the use of intersect_point_tri and multiple intersect_point_line calls
with some added vector math.
Differential Revision: https://developer.blender.org/D6200
Check was losing precision -- adjust by translating points
before calculating circumcircle.
Also, needed to check for flippability of edges before flipping.
Check was losing precision -- adjust by translating points
before calculating circumcircle.
Also, needed to check for flippability of edges before flipping.
When importing subdivision surfaces a 'Topology Changed' error was shown
even though the topology didn't change at all. The code was comparing to
`totpoly` where `totloop` should have been used.
The multi device code did not correctly handle cases where some GPUs store a
resource in device memory and others store it in host mapped memory.
Differential Revision: https://developer.blender.org/D6126
Data was not quantified properly. It also lets the library choose the suitable
encoding method rather than forcing it to use the edgebreaker method.
Differential Revision: https://developer.blender.org/D6183
Was happening when object transform is animated.
Caused by overly aggressive dependency construction introduced a
while back in 9d4129eee6: we shouldn't add dependencies unless
we really need them.
This change removes unneeded transform dependency for cap objects
(since only their geometry is used), and also removes own transform
dependency if there is no offset object (which is the only case when
own transform is needed).
Differential Revision: https://developer.blender.org/D6184
'rna_CollisionSettings_update' has a history of tagging ob for update:
rB79312c1912b4 ID_RECALC_TRANSFORM |ID_RECALC_GEOMETRY |
ID_RECALC_ANIMATION
rBf90a2123eedc OB_RECALC_OB | OB_RECALC_DATA | OB_RECALC_TIME
rBfaf1c9a4bb27 OB_RECALC_ALL
rB7df35db1b136 OB_RECALC
Since the meaning of OB_RECALC_TIME/ID_RECALC_ANIMATION changed a bit
historically (from "please update my animation if the animation
datablock is tagged for update" to "update animation of this datablock")
this was now always overwriting user edit with animated values, making
it impossible to change those values once animated.
Thx @sergey for guidance!
Maniphest Tasks: T68396
Differential Revision: https://developer.blender.org/D6113
When continuous grab, cursor motion was mapped to the min/max.
This caused problems when int/float max values were used.
Now the range is clamped by a value derived from the click-step
so dragging numbers never increases it to an impractically large value.
To recreate the main issue:
* Set render and file browser to show in full-screen in the preferences
* Default scene, press F12 in 3D View
* Press Alt+S to save the image
* Escape the file browser
* Escape the image editor
The former 3D View would now show the image editor. This is a common
use-case that should work.
Full-screen code is a hassle to get to work as expected. There are
reports from 2.5, I did lots of work years ago to get these kind of
use-cases to work fine. But apparently I broke this one with a fix for
another common use-case in March (0a28bb1422).
This now stores hints in the space, rather than the area, which should
make things much more controlable and hopefully help us fix issues like
this.
Here are a few references describing further common issues (all should
work fine now): 0a28bb1422, e61588c5a5, T19296
Checked over this with Bastien, we agreed that at some point we should
do a big rewrite of all of this, for now this is acceptable.
Cycles did not update the "is_enabled" flag on lights when they were synchronized again, which caused all lights disabled by "LightManager::disable_ineffective_light" to be disabled indefinitely. As a result the OptiX kernels were not reloaded with correct features when a change to a light was made. This fixes that by updating the "is_enabled" flag during synchronization.
Differential Revision: https://developer.blender.org/D6141
The cryptomatte sockets were incorrectly numbered using a step size of two. While the increment by two is necessary to get the correct number of render passes, they should be numbered consecutively matching the socket names of the cryptomatte node.
Reviewed By: lukasstockner97
Differential Revision: https://developer.blender.org/D6185
This change replaces old behavior when spline was toggled as cyclic
on double-click.
Doing so was tricky on a tablet and is rather non-intuitive in general.
Differential Revision: https://developer.blender.org/D6162
This adds a new mode to solidify to support non-manifold geometry
with edges using 3 or more faces as input, resulting in a manifold mesh.
Since the differences between these methods don't translate well
into short terms, they're named "Simple" and "Complex" in the UI.
This also adds clamp with respect to angles
to the existing solidify modifier calculation.
Add operator that sets the frame range, with an option to choose the regular or the preview one, around the selected strips.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D6078
Draw preview range overlay in the video sequencer in the same way as in the other animation editors
Add color control in the theme.
Prevent overlay to be drawn in the driver editor.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D6074
Skip building proxy if directory can not be created.
Crash happens, when setting custom dir to location of source file itself.
This results in attempt to create directory with the same name as source file.
Differential Revision: https://developer.blender.org/D6148
Reviewed By: sergey
When the stroke has less than 3 points, but only the fill material is enabled, the stroke is invisible and makes the shaders to remove any fill because the shader start and end pointers are not correct.
Now, if the stroke has only fill, but it is not fillable, it is drawn with the stroke color to avoid the errors and these ghost strokes.
The outliner didn't account for weight-paint + pose-mode,
making it consider all pose bones unselected.
When syncing selection, bones were unselected.
This adds a context argument to passed to drawing functions since
finding the weight-paint pose-object in the drawing loop isn't efficient.
In some cases the default data paths for blender does not exist.
For example on windows when using the portable install.
This would lead to errors when trying to lookup default paths in
is_path_builtin. Now we handle cases like this gracefully.
Identifiers for icons representing optical drives should use 'disc', not 'disk'.
Differential Revision: https://developer.blender.org/D6166
Reviewed by Julian Eisel
Frame Selected centers around the last valid stroke.
When Symmetry is enabled the last mirrored `location` was added to the
`average_stroke_accum` in stead of the original stroke location.
This patch will add the `true_location` to the `average_stroke_accum`.
This contains the original stroke location.
Issue happened in Vertex and Weight paint.
Reviewed By:
Pablo Dobarro
Differential Revision: https://developer.blender.org/D6161
- There was no way to select some kinds of data without activating them.
- Pose mode could not be activated at all.
No change to behavior with sync-selection enabled.
Add new `Backface Culling` option to the snapping properties.
This option has nothing to do with the view3d display or the
workbench `Backface Culling` option.
Limitation:
- In edit mode, this option only affects snap to faces.
Maniphest Tasks: T71217
Differential Revision: https://developer.blender.org/D6155
You may want to disable antialiasing if you are working with pixel art
or low resolution textures. It is enabled by default.
Reviewed By: jbakker, campbellbarton
Differential Revision: https://developer.blender.org/D6044
With the latest changes, the PBVH needs extra flags each time the mask is
modified to keep the internal fully_masked and fully_unmasked node flags
updated.
Reviewed By: jbakker
Maniphest Tasks: T70866
Differential Revision: https://developer.blender.org/D6088
Dissolve the vertex when it is wire instead of trying to collapse the
edge. When collapsing the edge, ##v_kill->e## was not NULL, so the
assert in ##bmesh_kernel_join_vert_kill_edge## fails.
Reviewed By: jbakker
Maniphest Tasks: T71053
Differential Revision: https://developer.blender.org/D6159
Previously, with the render display mode set to "Image Editor", we'd use
any image editor that doesn't already show a (non-render-result) image,
even if they weren't set to view mode (but UV, paint or mask mode).
It could be confusing or annoying when using an Image Editor for a
purpose that the mode wasn't created for.
Note that with the introduction of a UV sub-Editor, the old behavor was
even more confusing. Changing a UV Editor to show the render result was
weird.
Previously, you could delete presets that were part of the blender
default install. Now we check if the preset file resides in the bundled
file paths. If so, prevent deletion of the preset.
Reviewed By: Campbell
Differential Revision: http://developer.blender.org/D4522
This new function is part of the 'parallel for loops' functions. It
takes an iterator callback to generate items to be processed, in
addition to the usual 'process' func callback.
This allows to use common code from BLI_task for a wide range of custom
iteratiors, whithout having to re-invent the wheel of the whole tasks &
data chuncks handling.
This supports all settings features from `BLI_task_parallel_range()`,
including dynamic and static (if total number of items is knwon)
scheduling, TLS data and its finalize callback, etc.
One question here is whether we should provide usercode with a spinlock
by default, or enforce it to always handle its own sync mechanism.
I kept it, since imho it will be needed very often, and generating one
is pretty cheap even if unused...
----------
Additionaly, this commit converts (currently unused)
`BLI_task_parallel_listbase()` to use that generic code. This was done
mostly as proof of concept, but performance-wise it shows some
interesting data, roughly:
- Very light processing (that should not be threaded anyway) is several
times slower, which is expected due to more overhead in loop management
code.
- Heavier processing can be up to 10% quicker (probably thanks to the
switch from dynamic to static scheduling, which reduces a lot locking
to fill-in the per-tasks chunks of data). Similar speed-up in
non-threaded case comes as a surprise though, not sure what can
explain that.
While this conversion is not really needed, imho we should keep it
(instead of existing code for that function), it's easier to have
complex handling logic in as few places as possible, for maintaining and
for improving it.
Note: That work was initially done to allow for D5372 to be possible... Unfortunately that one proved to be not better than orig code on performances point of view.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D5371
In 2.8, code would not enter the new 'Objects' and Collections'
'folders'.
Maniphest Tasks: T71026
Differential Revision: https://developer.blender.org/D6123
Hover (active) widget states now affecting more elements and in a more consistent way.
Differential Revision: https://developer.blender.org/D6098
Reviewed by Campbell Barton
Updated icon set from Andrzej Ambroż.
- Includes new icons for Top Bar, Status Bar, CD/DVD drives, Home, Documents, Temp, Memory, Options.
- Includes small tweaks to many icons throughout Blender
- Also adds a large CD/DVD drive icon for the file browser
This does not add the new icons in the interface yet.
flipped to bottom
While flipping the header to bottom works in the MCE (because MCE doesnt
allow overlapping UI) we need to take the regions visible rect into
account for the Image Editor.
Also correct clickable scubbing area (poll for frame_change) in the
Image Editor and the MovieClip Editor not taking UI_DPI_FAC into
account.
Maniphest Tasks: T70905
Differential Revision: https://developer.blender.org/D6090
using image.unpack() or bpy.ops.image.unpack()
If we offer this in the UI, also expose this to .unpack
Maniphest Tasks: T71171
Differential Revision: https://developer.blender.org/D6152
This brings the behavior in line with Windows and Linux. Going between
multiple windows now doesn't use the first click only to change focus
but also allows Blender to process those events.
When opening the file browser as regular editor, the ID filter flags
as stored in FileSelectParams were not set explicitly, so they were 0.
Since 9100982e80, the value actually passed to the filtering could
differ from that, causing the file list cache to be constantly updated
on every redraw.
Caused by 9100982e80.
Note that this "accidentially" got fixed in master with b546263642,
which is why the issue only showed up in the release branch from that
point.
Instead of checking for names that contain ".", only skip files
that start with a "." (since they're used for ".git" & ".arcconfig").
While other path names may fail to import, it's not the purpose of this
function to validate the path, have the caller must raise an error
instead of silently skipping them.
See D6140.
Deduplicate the code and use the same logic used to
calculate individual elements in `t->values_final[0]`.
Differential revision: https://developer.blender.org/D6135
The problem was the real menu text must be: `Convert to Polygon Curve` as is Object menu.
A GPencil object cannot be converted to mesh in one step. The conversion must be GPencil to Curve and Curve to Mesh.
This is useful for drawing keymap items into the header or status bar
While these icons are available directly,
mapping them from the keymap item isn't trivial.
Incorrect cursor shown for horizontal split when selected from edge context menu.
Differential Revision: https://developer.blender.org/D6124
Reviewed by Campbell Barton
Multiple selection operations failed with weight-paint + pose mode.
Weight-paint + pose mode is a special case that doesn't support
multi-pose mode, so we need to use this instead of the generic
function.
This only impacts push-pull & shrink-fatten.
Flipping this matches zoom where moving the mouse cursor up
increases the zoom-level.
Previous behavior felt unnatural when adding gizmos to these tools.
Was caused by D6068, which did not handle "MEM_PIXELS" memory
when not in background mode. Before that it always fell back to using
generic device memory, so restoring that behavior. In future this
should be changes to use OpenGL interop for optimal performance.
When there was no way to find the data-path from context
the shortcut was still being created.
It would evaluate to "context.(null)".
Now adding shortcuts will be disabled if the path can't be computed.
Large objects with many separate pieces became unstably slow
(run for hours and not finish).
The entire original mesh was being duplicated twice per loose part.
In own tests, millions of vertices and thousands of loose parts
now run in around 5-15 seconds.
* Add proper adjustment for scale in the solver epsilon computation.
* Run at least one full iteration of the solver, even if the initial
state meets the epsilon requirement.
* When applying offset, blend normal into the offset direction
as the initial point moves very close to the target mesh.
Also random improvements to debug trace output in the console.
This fixes the crash, but it does not fix the core issue. The PBVH should
always be available when an object is in sculpt mode and tools should
not need to check for that.
Reviewed By: jbakker
Maniphest Tasks: T70790
Differential Revision: https://developer.blender.org/D6063
Was cause by recent fix for T65134 which assigned original object's
proxy_from to an evaluated pointer.
This is because motion path depsgraph does not include proxies, so
the pointer in an evaluated object was kept pointing to an original
object.
Caused by rB46102cf4e0c4 [which removed the check if the image can
actually be loaded].
Maniphest Tasks: T70903
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D6089
The OptiX implementation wasn't trying to allocate memory on the host if device allocation failed, while the CUDA implementation did. This copies the implementation over to OptiX to remedy that.
Differential Revision: https://developer.blender.org/D6068
'PE_set_data' / 'PE_set_view3d_data' would give us a depsgraph already,
so use it.
Also fix access to PEData->depsgraph without calling 'PE_set_data' prior.
Addresses concern raised in rBcf2c09002fae.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D6067
When displaying the voxel size for an adaptive domain the resolution of the adaptive domain was used to calculate the world size of the voxel.
This patch changes this to use the initial size of the domain.
When using adaptive domain the overlay was not rendered in the right
place.
Thanks to sebbas for part of the patch!
Reviewed By: sebbas, fclem
Differential Revision: https://developer.blender.org/D6076
When displaying the voxel size for an adaptive domain the resolution of the adaptive domain was used to calculate the world size of the voxel.
This patch changes this to use the initial size of the domain.
When using adaptive domain the overlay was not rendered in the right
place.
Thanks to sebbas for part of the patch!
Reviewed By: sebbas, fclem
Differential Revision: https://developer.blender.org/D6076
Caused by what appears to be a missing flush from evaluated bone back to
original, which then makes it so copy-on-write operation happening after
click (to synchronize selection flags) pushes original bone to its initial
position.
Differential Revision: https://developer.blender.org/D6051
All the single-value texture inputs of Principled BSDF node should use
non-color colorspace profile, not sRGB one (issue raised in
https://blender.stackexchange.com/questions/155617, thanks).
That also revealed another issue - since those color space settings are
stored at the image level itself, not the node one, we need to
duplicate those image data-blocks when we use same picture for e.g. base
color (sRGB) and specular (non-color) inputs...
For now using a basic mechanism for that, might generate several extra,
uneeded copies of the image ID, but that’s better than breaking custom
settings and such.
Note that while this will modify the behavior of the impporters using
that node wrapper, no change should be needed in IO add-ons themselves.
The auto-smoothing flag can now be used by artists when the Alembic file
does not contain custom loop normals.
- Auto-smoothing disabled: mesh is flat-shaded.
- Auto-smoothing enabled: works as usual; set angle to 180° to ensure
a 100% smoothed mesh.
When the relative mode was used, the calculation of the total number of vertices was not done and it was using the total number of vertices in the datablock. This worked for small files, but with complex files the time to allocate all the data was too long and the performance was very bad.
Now, for relative mode the real number of vertex is calculated.
Also fixed the same problem when onion and multiedit is enabled.
This was caused by 2 things: Shadow map bias and aliasing.
It made the expected depth of the shadowmap further than the surface
itself in some cases. In normal time this leads to light leaking on normal
shadow mapping but here we need to always have the shadowmap depth above
the shading point.
To fix this, we use a 5 tap inflate filter using the minimum depth of all
5 samples. Using these 5 taps, we can deduce entrance surface derivatives
and there orientation towards the light ray. We use these derivatives to
bias the depth to avoid wrong depth at depth discontinuity in the shadowmap.
This bias can lead to some shadowleaks that are less distracting than the
lightleaks it fixes.
We also add a small bias to counteract the shadowmap depth precision.
Before this patch you could go to a local view with a single object,
while you had other objects also in edit mode, and your operators would
affect all objects even the ones outside your local view (same for local
collection).
Differential Revision: https://developer.blender.org/D6064
Background dithering was introduced to solve banding issues on gradient backgrounds.
This patch will enable dithering based on the texture that is used for drawing.
Only when using a GPU_RGBA8 texture the dithering will be enabled.
This disables dithering for final rendering, vertex and texture paint modes.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6056
This adds the ID-Filters visible on append/link to the settings the file
browser remembers, potentially storing them in the Preferences.
Artists in the studio here requested this. They typically have to set up
the same or similar settings every time, so this saves them from that.
The onion skin was nos displayed in secondary screens when disable the Onion switch or the Overlay in the main window.
Added a check to verify if the main overlay and onion switches are enabled in any screen in order to generate the cache data.
This is required to generate the onion skin and limit the times the cache is updated because the cache is generated only in the first screen and if the first screen has the onion disabled the cache for onion skin is not generated. The loop adds time, but always is faster than regenerate the cache all the times.
Reviewed By: mendio, pepeland
Differential Revision: https://developer.blender.org/D6049
This is intended for developers on Windows primarily:
Now, CUDA architectures of type compute_xx are supported. This allows for quicker builds,
at the expense of the CUDA driver running ptxas the first time a kernel is loaded.
Differential Revision: https://developer.blender.org/D5953
Was crashing due to RBW mssing shared->physics_world [which can happen
when undoing the deletion of the last object in the world].
This can be gained back by BKE_rigidbody_validate_sim_world.
Reviewed By: mont29
Maniphest Tasks: T70667
Differential Revision: https://developer.blender.org/D6037
Sequence Editor
Code in 'seq_render_mask' will effectively do
BKE_mask_evaluate(mask_temp, mask->sfra + (cfra - fra_offset), true)
where 'fra_offset' is zero for absolute and seq->start for relative.
If we really want the scene's current frame (as advertised) if Mask Time
is set to Absolute (effectively ignoring the Mask Settings start/end) we
need to change the fra_offset from zero to mask->sfra.
Also BKE_animsys_evaluate_animdata should take mask->sfra into account
as well (otherwise mask animation [points] and other animation [e.g.
opacity] will run out of sync)
Reviewers: campbellbarton, ISS
Maniphest Tasks: T68700
Differential Revision: https://developer.blender.org/D5495
the radius is zero)
Merge threshold for remove_doubles was hardcoded, now scaled by depth.
Reviewed By: campbellbarton
Maniphest Tasks: T70560
Differential Revision: https://developer.blender.org/D6001
Allow different splash heights, without this changes the the
default splash would stop app templates splash screen from loading.
This also allows the default splash height to change without
manually editing the layout.
Now local collections are fully working with cycles preview, while the
collection visibility bug is fixed.
Local collections were not working with cycles viewport even before the recent
commit to allow users to show collections that are hidden in the view layer.
It just got worse with said commit (0812949bbc).
Differential Revision: https://developer.blender.org/D6034
That would lead to crashes and other issues. The solution is not elegant
though, it involves resyncing all the collections again.
Differential Revision: https://developer.blender.org/D6043
We need to handle beta stage in a specific way, since it's no longer
master, but not yet 'real' rc/release stage...
For now, only point to version dir of the API doc, but no need to create
any symlink (that way, 'current' remain pointing to 2.80 release, while
'2.81' is no longer a symlink to 'master', but its own actual doc).
Previously, we used Ctrl+Click for renaming, but since that shortcut is
now consistently used to add items to the selection, we can't use that.
In other cases we switched to F2 now, so it makes sense for the File
Browser too.
Further, AFAIK renaming was only possible through the context menu,
which makes it hard to discover in the right click select keymap (have
to press W).
Note that I had to do some internal changes to ensure the context menu
always acts on the clicked/hovered item, while the shortcut operates on
the active item. William and I agreed that this is likely the behavior
expected by most users.
When executing the node selection operator through Python, or in fact
any similar select operator with drag-all-selected support, the operator
was enabling modal execution, which should not be done in this case.
Reason was simply a wrong default for an internal property.
Note that the issue also affected animdata handling...
Checked all usages of the `BKE_libblock_copy_ex()` function, and
think never handling user count here is valid, although a bit risky
maybe. But other solution would be to add yet another copy flag, so
would rather go with that one for now.
This reverts commit 20b2acf336, reversing
changes made to f185cc0ca5.
Merges should only go form the release branch to master. For backporting
commits, use cherry-pick.
Note that this commit fixes the crash itself, but actual issue is *how*
that situation could happen (having insert override operation with local
'source' overriding data-block with an empty bone constraints stack...).
This commit adds a shadow to the grid scale info text in the 3d View,
to make it more visible like the rest of that section.
{F7798605}
Differential Revision: https://developer.blender.org/D6025
This is a configuration of Blender mirror on Github which automatically
closes Pull requests and gives developers instructions how to submit patch
to an official code review.
Differential Revision: https://developer.blender.org/D6027
This patch is only for the eyedropper to create materials.
Options:
Click: Create Stroke Material
Shift+Click: Create Fill Material.
Shift+Ctrl+Click: Create Stroke and Fill Material.
Toolbar:
{F7718606}
Reviewed By: brecht, mendio
Differential Revision: https://developer.blender.org/D5688
This was detected fixing T69459
Part of Differential Revision: https://developer.blender.org/D6045
Note: done in a separated commit to keep track of changes done not directly related to bug reported in T69459.
It is not allowed to do tagging or updates while dependency graph is
in the middle of evaluation.
This is something what is simple to violate from python code. This
change adds some sanity checks.
The request to update view layer or dependency graph will raise an
exception in Python now, so it's easy for scripters to notice.
Tagging for update will do silent return unless running with debug
command line argument. This is because it's a bit tricky to know
which exact dependency graph corresponds to a context from which
an update tag was triggered.
Differential Revision: https://developer.blender.org/D6035
After doing some test, the cross cursor is too intrusive when you are drawing in grease pencil, so we decided to change by Dot cursor.
Reviewers: @brecht@mendio @pepeland @pablovazquez @billreynish
This solves performance issues on some computers where there is significant
threading overhead. Rather than doing the complicated work of optimizing our
own task scheduler, use TBB which appears to work well. The downside is that
we have another thread pool, but it is already there when using OpenVDB voxel
remesh.
For future releases we can switch to using TBB to replace our task scheduler
implementation entirely, and use the same thread pool for BLI_task, Cycles,
Mantaflow, etc.
Differential Revision: https://developer.blender.org/D6030
In Blender 2.7 delete would permanently delete files, now this function is back
but using more standard behavior.
This patch includes code contributed by Kris (Metricity).
Differential Revision: https://developer.blender.org/D4585
Was caused by non-normalized coordinates (normals). Note this is not 100%
correct as the dFdx functions can be the same for packs of 4 pixels and the
derivated value can only be correct for one pixels.
This is because smoothed normals are a non-linear function (because of the
normalization).
The correct fix would be to do the dFdx offset BEFORE any normalization.
This is something which worked in Blender 2.79.
Need to do special trickery to ensure peoxy_from points to a
proper object.
Differential Revision: https://developer.blender.org/D6040
The manipulator would hide axes that were locked, even if the lock was
applied to a different space. That would lead to confusing behavior of
the manipulator. E.g.:
* Add armature
* Enter Pose Mode and select the bone
* Lock X and Y location in the Sidebar
* Enable the Move tool
* Only the Y axis is visible, but doesn't do anything on dragging
The manipulator would only show the Y axes, even though the lock is
applied to the bone's local Y axis, which matches the manipulators Z
axis.
Differential Revision: D6021
Reviewed by: Brecht van Lommel, William Reynish
When an edit-bone was locked, we hid the transform manipulator for it.
But only if the bone itself was selected, not when the root or tip were
selected, even though they are locked then too. So this makes sure the
manipulator is shown in neither case.
The goal is to make it able to use pre-compiled CentOS libraries on a
more modern system. Main issue was that it's possible that the compiler
on a newer version is defaulting to different C++11 ABI.
This change makes it so that if there is NO native libraries in the
lib folder and there IS pre-compiled CentOS folder, it will be used and
compiler will be forced to old ABI.
Differential Revision: https://developer.blender.org/D6031
Proposed fix for T70141.
Before, the ruler was using the name of the layer as key, but this is very weak because if the layer name changes, the layer gets an annotation layer.
Now, the layer is marked using a flag and now it's possible to rename it.
Reviewed By: dfelinto
Differential Revision: https://developer.blender.org/D6028
Was caused by the bump node not being evaluated because the other branch
was evaluated before.
To fix this, we use fromnode instead of tonode.
Also we fix a potential issue with recursiveness because
ntree_shader_copy_branch() also use nodeChainIterBackwards() which would
reset the iter_flag in the middle of the parent iteration. Use iter_flag
as a bitflag for each iteration to fix this.
With this commit sculpt mode draws the real mesh wireframe instead of the
triangulated version by ignoring non real edges when building the PBVH GPU buffers
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6032
Namely addresses -Wstringop-truncation
Not sure if there is anything to be done for strncpy.
Differential Revision: https://developer.blender.org/D6006
This commit also fixes the same issue in elastic deform
Reviewed By: jbakker
Maniphest Tasks: T70554
Differential Revision: https://developer.blender.org/D6014
This is pretty conservative. We do not show warnings for e.g. HD 4000 with the
latest drivers as they appear to be working mostly fine even if unsupported,
and there is nothing the user can do to improve things.
Ref T70520
Removes custom logic from buildbot's packing step.
This also removes icons/ folder, but CMake was already copying the
icons to the root of the install folder.
The CMAKE_SOURCES variable is not yet initialized when the buildbot
configuration is read. This is similar to the include of full release
configuration happening earlier in the file.
Users now can turn on in a viewport collections that are temporarily
hidden (eye) in the view layer.
Design task: T61327
As for the implementation, I had to decouple the visibility in the
depsgraph from the visibility in the view layer.
Also there is a "bug" that in a way was there before which is some
operators (e.g., writing a text inside of a text object, tab into edit
mode) run regardless of the visibility of the active object. The bug was
present already (with object type visibility restriction) in 2.80 so if
we decide to tackle it, can be done separately (I have a patch for it
though P1132).
Reviewed by: brecht (thank you)
Differential Revision: D5992
clang got a little to aggressive discarding unused variables
see D6012 for details.
Differential Revision: https://developer.blender.org/D6012
Reviewers: brecht, sergey, angavrilov
Walk Navigation was missing rotation keyframes on confirm (when animation
wasnt playing) after rB22bdd08dfd0.
Because for walk [in contrast to fly], the cursor is constantly warped
(WM_cursor_warp in walkEvent), we cant do something reasonable with
comparing mouse positions (to detect rotation) when mouse comes to rest.
Now remember if rotation changed at any time.
Also tweaked the insertion for location keyframes (which was always
happening even if the camera did not move), now checking the real dvec
(instead on relying on speed)
Reviewed By: dfelinto
Maniphest Tasks: T70585
Differential Revision: https://developer.blender.org/D6018
Found this while looking into T70463, solves the high spinning times
mentioned in T70463#791026.
Sounds logical that iterating over an array to modify a single property
is faster than doing it in threads. But strangely, doing it for both
nodes and its components is still faster in threads here.
Gives extra speedup with a file mentioned in the report.
Reviewed By: brecht, mont29
Differential Revision: https://developer.blender.org/D6017
This should fix most of the shrinkwrap artifacts when the preserve volume option is active. After this commit the default voxel remehser settings should not fail in the default cube.
Reviewed By: zeddb
Differential Revision: https://developer.blender.org/D6010
Fixing/working around another weakness of current RBW model... This is
not really nice, but it should work for now, and we cannot really do
anything else but that kind of monkey patching here anyway.
Only regions with alignment set should be toggle-able. If this is not
set, then the region is likely either a main region, or entirely hidden
by the user (not just collapsed).
Evaluation is not entirely cheap even in the case when there is nothing tagged
in the scene. This is because of all the calculation of pending operations,
cleating runtime flags and so on.
This commit makes it so time operation is tagged for update prior to early exit
check. Improves playback speed in a scene without anything animated.
Maniphest Tasks: T70463
Differential Revision: https://developer.blender.org/D6002
Actually, in Dopesheet mode, the regions shouldn't be toggle-able at
all. For the user they should appear to not exist.
Previously the Movie Clip Editor archieved this by setting the region
alignments to NONE, which this restores.
Introduced in 6aef124e7d.
Part of T57918. Selecting and dragging items were conflicting actions
previously when both were using the same mouse button. This avoids the
conflict.
See be2cd4bb53 for details on behavior.
This commit enables antialiasing in 2D painting.
It also includes some fixes related to line drawing in the stroke spacing code.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5833
This makes multires undo much faster and fixes the viewport lag after and undo operation.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5994
The issue was caused by crazy space distortion orientation happening
for subsurf modifier.
Solved by making it so subsurf only deforms the surface but keeps
matrices as-is. This is not fully mathematically correct, but is better
that the fall-back solution which was doing wrong matrices anyway.
Also, this is closer to have subsurf was handled prior to the
related changes.
Reviewed By: brecht, pablodp606
Differential Revision: https://developer.blender.org/D5991
disabled and no world assigned to scene
BlenderSync::sync_world still relied on a blender world (mixes the world
viewport color with the studio light), for now just take black if no
world is present.
Maybe we should we use the theme color in the future here (seems eevee
does this in that case) -- we'd have to pass down `b_userpref` from
`BlenderSession::render` down to `sync_data > sync_shaders > sync_world`
then afaics.
Reviewed By: jbakker, brecht
Maniphest Tasks: T70573
Differential Revision: https://developer.blender.org/D6005
This keymap was the old polygon mode for old grease pencil and now this have been replaced with Line tool. As this code was not ready for this keymap, the code gets out of control and fails. The solution is to remove this deprecated keymap.
Camera background images were not shown under transparent objects.
This patch performs an alpha under for background images for cycles.
In order to see the difference the Film transparency needs to be turned on.
Note that workbench and EEVEE still needs to be adapted as they don't
write store alpha value in the viewport.
Side note. This implementation is already an improvement of the current behavior, what users are requesting. (Show background images underneath cycles viewport rendering.) It is clear that this patch still needs to be extended to workbench and eevee. For now that should be marked as a known limitation.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D5437
Underline was implemented in rBa07394ef2cfd.
It seems that the extrude feature never worked.
Ref T70418
Reviewed By: mont29
Maniphest Tasks: T70418
Differential Revision: https://developer.blender.org/D5972
Side-reported in T70505.
Code did not ensure deleted object was removed from the RBW constraints
collection, leading to some invalid status (object in constraints
collection but without relevant contraints data).
Also fixed another issue - code deleting RBW objects would try to remove
any constraint one using it as target, in a very bad and broken way,
since you cannot iterate over objects of a collection while removing
some... Now instead just NULLify relevant pointers... I hope it works,
otherwise we'll have to take a different approach.
Needless to stress again how weak the whole RBW code is in general, and
regarding same object being used by RBW in more than one scene in particular,
that is known broken situation anyway.
In fact, the operator implementation seems to have some issues, which is
why this behaved so glitchy. But for properly set up keymaps it should
work fine.
Part of T57918. Selecting and dragging items were conflicting actions
previously when both were using the same mouse button. This avoids the
conflict.
See 056fcdfe7bbed3 for details on behavior.
Part of T57918. Selecting and dragging items were conflicting actions
previously when both were using the same mouse button. This avoids the
conflict.
See 056fcdfe7bbed3 for details on behavior.
Part of T57918. Selecting and dragging items were previously conflicting
actions when both were using the same mouse button. This avoids the
conflict.
See 056fcdfe7bbed3 for details on behavior.
Based on work by Bastien and Brecht in the Node Editor, this adds more
generalized support for selecting items so that click+drag actions on
items (nodes, makers, dopesheet keys, etc.) works as wanted.
Note that this only adds the barebones to support this in other editors,
it's not used yet (will be done in followup commits).
The behavior is supposed to work as follows:
* Clicking an unselected item immediately selects it, and deselects
other items (doesn't wait for release events).
* Click+drag on an unselected item immediately selects it, deselects
others and drags it in one go (don't require selecting it first!).
* Click+drag on a selected item won't change the selection state (and
won't send an undo push) and start dragging all selected items as soon
as the drag event is recognized.
* Clicking on a selected item will still deselect others, but that will
only happen on mouse release, when we know the intention is not to drag
the item.
Included in: https://developer.blender.org/D5979
Reviewed by: Brecht van Lommel, William Reynish
The previous method produced non smooth interpolation results and it was
very hard to control. (At least for me it seemed to be broken until I
actually took a look at what the code actually did)
Now we simply linearly interpolate between the breakdown position and
the current bone data.
Reviewed By: Sybren, Hjalti
Differential Revision: http://developer.blender.org/D5892
Opus support was enabled in 2ddfd51810. This commit adds the Opus
library and configures FFmpeg to be compiled with Opus support.
NOTE: It may be required to run `cmake -U '*FFMPEG_LIBRARIES*' .` in
your Blender build directory in order to refresh the `FFMPEG_LIBRARIES`
setting and add libopus.
This issue was two-fold:
- In the VPX library build script: missing `--enable-vp8` and
`--enable-vp9` meant that the choice to enable these codecs or not was
left to the library's `configure` script, rather than an explicit choice.
On the build-bot it chose to not enable them.
- Missing pkgconfig paths passed to the FFmpeg build script
Thanks @brecht for helping out.
Adds a check when starting blender if your platform is supported. We use a blacklist
as drivers are updated more regular then blender (stable releases).
The mechanism detects if the support level changed or has been validated by the user previously.
Changes can happen due to users updating their drivers, but also when we change the support
level in our code base.
When the user has seen the limited support level message it is saved in the user config.
It would be better to have a system specific config section, but currently not clear
what could benefit from that.
When the platform is unsupported or has limited support a dialog box will appear including a link
to our user manual describing what to do.
**Windows**
Windows uses the MessageBox that is provided by the windows kernel.
**X11**
We use a very lowlevel messagebox for X11. It is very limited in use and can be fine tuned when needed.
**SDL/APPLE**
There is no implementation for SDL or APPLE at this moment as the platform support feature targets mostly Windows users.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5955
The gain socket in the Musgrave node should be available in the ridged
multifractal mode. The logic for the availability was incorrect.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5989
This basically reverts 540eb2dc1e for an alternative solution that
only enforforces release_confirm [ignoring the preference] on mouse for
the node editor.
Approved by @brecht in T70504.
The bug was basically just caused by a missing 'edit_image' and
'edit_image_user' pointer in context for
'node_shader_buts_tex_environment_ex'.
So adding the following there would be enough to fix the bug:
uiLayoutSetContextPointer(layout, "edit_image", &imaptr);
uiLayoutSetContextPointer(layout, "edit_image_user", &iuserptr);
However, I would suggest using the full-flegged uiTemplateImage (just as
'node_shader_buts_tex_image_ex' does -- instead of a "handmade" subset)
for the following consistency reasons:
- Layout was using single column for image textures, but not environment
textures
- Save / Discard feature on editing the image was there for image
textures, but not environment textures
- Environment textures: Color Space was displayed on node (but not
properties)
- Environment textures: Animation / Sequence settings were displayed on
node (but not properties)
Cant think of a reason for _not_ displaying the whole set for
environment textures (just as for regular image textures)?
Maniphest Tasks: T70454
Differential Revision: https://developer.blender.org/D5988
- Fix accumulate by allowing normal radius greater than one. Now it works as it should and it should be enabled by default
- Make the square test sharper. This gives a lot more definition to the brush, even when working with fewer polygons
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5984
The clamp option in the Map Range node doesn't work correctly when the
inputs are linked. The code didn't put that into considration.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5987
Quadriflow does not support non manifold meshes. (Edges with > 3
connected faces and discontinuous face normal directions)
While it does sometimes "work" in these configurations, the results are
not good and in most cases it just flat out will crash.
Added a sanity check to make sure that the input mesh is manifold.
Reviewed By: Brecht
Differential Revision: http://developer.blender.org/D5877
This commit solves the bug itself (code was broken when real_id owner of
the private data ID could not be found), and generates a more sensible
representation for all evaluated IDs, makes no sense to display them as
being part of `bpy.data....`!
Now, custom props defined as overriddable can be overridden, saved,
reloaded, etc. That fixes the last main issue with them.
Note that custom props still have a lot of glitches and weirdness in
their overriding behavior, but for now the most important is finally
achieved, will let them rest and settle a bit, those have been
incredibly painful to tame... :(
Before, the modifiers were evaluated in Draw Engine and this required to calculate a factor to increase the VBO size.
Now, the modifiers are evaluated in Depsgraph and the Draw Engine receives the evaluated stroke with the final number of vertices. As the number of vertices is the final value already, if Draw Manager increases the number with the modifiers only increases the memory with empty space because never would be used. This commit removes this double calculation, reducing the memory usage and removes a loop to calculate the size by modifier too.
Also, the function getDuplicationFactor() has been removed because is not required anymore.
Problem was twofold
1) `GENERATOR_IS_MULTI_CONFIG` is a property not a variable so
the test for it would always be false, unless you set a custom
CMAKE_INSTALL_PREFIX (like the buildbot does) the unit tests
would have a wrong working directory and complain about missing
dlls or blender executable
2) Tests added outside of `/test` (like libmv) would have no working
folder set since the variable would not be visible for them.
consulted @sergey who voiced the opinion that duplicating the code
to the test macro was slightly less evil than moving it to the main
CMakeLists.txt
Due the internal design of the drawing engine and the special requirements for 2D inside 3D, it's required to keep the original stroke visible in order to display the particles. If the original stroke is hidden, the particles are hidden too.
This commit only fix the segmentation fault. Make visible the particles when the original is hidden would require a complete redesign and maybe would break some 2D features.
For many users, this will make the File Browser window behave more like
what they would expect. It addresses the issue of the File Browser
becoming hidden behind the main window by clicking anywhere in the
latter. It communicates the interruptive, but temporary nature of the
operation a bit better.
Further, on tiling window managers the File Browser now opens as
floating by default, like in other applications.
Note that this also makes sure the File Browser is always opened as
separate window, so it doesn't re-use the Preferences, or any other
temporary window anymore. This seems to have been a common annoyance.
More concretely, this makes the File Browser window behave as follows:
* Stays on top of its parent Blender window, but not on top of
non-Blender windows.
* Minimizes with its parent window
* Can be moved independently
* Doesn't add an own item in task bars
* Doesn't block other Blender windows (we may want to have this though)
* Opens as floating window for tiling window managers (e.g. i3wm/Sway)
Further notes:
* When opening a file browser from the Preference window (or any
temporary window), the main window, as the file browsers parent is
moved on top of the Preferences, which makes it seem like the
Preferences were closed. This is the general issue of bad secondary
window handling as window activation changes. I made it so that the
window is moved back once the file browser is closed.
This behavior is confusing and would be nice to avoid. It's a separate
issue though.
* On most window managers on Linux the temporary window can not be
minimized and maximized, they disable that for dialog windows.
* On Windows and macOS, only minimizing is disabled, as there is no
decent way yet to restore a window if it's not shown in the taskbar.
Reviewed By: Brecht van Lommel, Campbell Barton, William Reynish
Edits and macOS implementation by Brecht.
Differential Revision: https://developer.blender.org/D5810
Part of T69652.
Assign, select, deselect buttons added when in edit mode to complete the functionality
of the shader editor vs. the properties panel.
Reviewed by: brecht
Differential Revision: https://developer.blender.org/D5768
This has already been fixed in 8d207cdc3b
as fix for T52472: VSE Audio Volume not set immediately, but I failed to
backport it to upstream audaspace which is the reason the problem was
back.
The default was changed with an initial implementation of the feature.
With the feedback from animators, having a behavior which affects curves
outside of a changing range is not convenient for professional animators
working on high quality character animation. On the other hand, automatic
smoothing is better for casual animation of object motion.
This change adds an ability to change the default via User Preferences.
Differential Revision: https://developer.blender.org/D5875
This solves an issues where these text fields would use menu background colors,
making it difficult to create a correct theme.
Default theme looks the same, only Blender Light now shows a dark text field.
Patch contributed by Paul (Thirio).
Differential Revision: https://developer.blender.org/D5906
We don't need to filter the fully masked nodes here after adding the flag
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5973
This disable the indirect drawcall on all Nvidia hardware.
This has to be until nvidia fixes their drivers or instruct us
how to correctly fix the issue.
Related to T70011 Various display issues on NVIDIA
after draw call batching.
Alt-LMB is used in quite a few areas now, see T69323
using OS-Key allows these conflicts to be avoided.
Currently disabled for WIN32, since it conflicts with the start menu.
Changing this values should only support horizontal movement as we are no longer trying to match the size of the cursor and the size of the circle preview in the widget.
Reviewed By: brecht
Maniphest Tasks: T70310
Differential Revision: https://developer.blender.org/D5931
Now the grid matrix is calculated when the shading group is created.
Also, the grid pass is only created when needed and reduce memory usage when the scene is not using grease pencil objects.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D5966
Caused by 5c79f2d0fb.
If no valid node_start is provided, we can just skip (e.g.
'ntree_shader_bump_branches' is not done then, but this is not
neccessary without a valid eevee output node anyways...).
Maniphest Tasks: T70441
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D5969
Rendering would produce invalid results or crash if the Vector pass was active but motion blur was inactive. This caused the OptiX BVH to be built with motion (because objects reported motion available), but the pipeline to be built without motion support (since with disabled motion blur this is not in the list of requested features). The two are not compatible and therefore caused issues. This patch fixes that by not building the BVH with motion if motion blur is not active (which makes sense).
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5968
Boost 1.68 has a bug in its type_traits where it does not include the right
header for the is_assignable macro when building with Clang. Temporarily work
around it until we upgrade to a newer Boost version that fixes it.
Differential Revision: https://developer.blender.org/D5962
1) Clang was given the wrong VS version to emulate when used in
combination with VS2019 causing build issues.
2) The erroneous supplied parameter `-std::c++11`caused CMake to
fail running its compiler detection scripts.
Previously when clicking and dragging with LMB you would only move the entire
plane track. In order to move the corners independently you would have to use
your right mouse button. This would also prevent the context menu to show up.
Now LMB click and drag on corners moves them. If you LMB click and drag one of
the 4 edges of the plane track you would move the entire plane track.
Differential Revision: https://developer.blender.org/D5519
At the moment, grouping a single node that has hidden sockets, exposes all
sockets in the node group. This patch just filters hidden sockets, so that
the node group's interface remains the same as the node being grouped.
Differential Revision: https://developer.blender.org/D5533
Produces almost the same result but takes in account all the edges instead
of only four, which gets rid of the need to select specific edges. Also,
added a check to prevent it from destroying boundaries.
Differential Revision: https://developer.blender.org/D5763
This is not actually fixing the real issue here, PackedFile structs are
never supposed to have a NULL pointer - and in that monster .blend file,
the pointer is not NULL, but the actual data chunk has been lost
somehow, so it gets NULL during read process.
Very unlikely we ever know how such corrupted .blend was created though
(there's probably a fair chance that this is not even due to a bug in
Blender, but rather a glitch in filesystem or something).
So for now, ensure at read time that we get a coherent state (i.e.
remove any read PackedFile that would have a NULL data field), and add a
few asserts in relevant code to check we never get NULL data pointer
here.
Curves with motion blur produced wrong results with OptiX (T69801). This is because the AABBs for the motion steps were calculated from incorrect attribute data because the offset into the attribute data array was incorrect.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5961
This applies to all paint modes except sculpt and grease pencil brushes.
When painting color or weight it's best to paint the color
the user has selected, without them having to make multiple strokes.
Update image undo to store buffers for each step:
- Undo buffers share tiles to avoid using too much memory.
- Undo support for different sized buffers
allowing operations such as crop or resize.
- Paint tiles have been split into separate API/storage.
- Painting speed wont be impacted significantly
since storing the extra tiles is done after the stroke & only
for the first undo step.
Resolves T61263, see D5939 for details.
The core of the issue here is that 'make single user' functions still
does its own, manual and quite partial, remapping of IDs, which covers
all most common cases but cannot consider *all* possible ID usages
(especially when it comes to drivers or custom properties, that can
essentially point to any kind of data-blocks).
This fix is merely a band-aid, there is no way to fully solve this
without a complete rewrite of that area of code to make use of modern ID
management code.
present
Selection state of lattice points as well as their weight were not kept
when going in and out of editmode, code would just copy positions.
Now copy the whole BPoint instead.
Reviewers: campbellbarton
Maniphest Tasks: T70376
Differential Revision: https://developer.blender.org/D5948
Having a constant FCurve doesn't make sense for drivers; either linear
or Bezier should be used. Since the code is already creating a Bezier
curve, I just added the flag to not look at the user preferences in this
case.
Reviewed by: angavrilov
Differential Revision: https://developer.blender.org/D5921
Changes to cursors that can be used for painting and sculpting.
Differential Revision: https://developer.blender.org/D5951
Reviewed by Brecht Van Lommel
This makes it so that some display related properties of the file
browser state are remembered in the Preferences. Otherwise, users often
end up doing the same set up work over and over again, so this is a
nice way to save users some work.
It's typical for other file browsers to remember their state too, so
another benefit is having a more conventional behavior, meeting user
expectations better.
Some points:
* We currently store: Window size, display type, thumbnail size,
enabled details-columns, sort options, "Show Hidden" option. More can
be added easily.
* No changes are stored to the Preferences if "Auto-save Preferences"
is disabled. This is how Quick Favorites behave too and it's a
reasonable way to make this behavior optional.
* The Preferences are only saved to permanent memory upon closing
Blender, following existing convention of Preferences and Quick
Favorites.
* If settings weren't actually changed, Preference saving is skipped.
* Only temporary file browsers save their state (invoked through
actions like open or save), not regular file browser editors. These
are usually used for different purposes and workflows.
* Removes "Show Thumbnails" Preferences option. It would need some
special handling, possibly introducing bugs. For users, this
simplifies behavior and should make things more predictable.
Left in DNA data in case we decide to bring it back.
Reviewers: brecht, #user_interface, billreynish, campbellbarton
Reviewed By: #user_interface, William Reynish, Campbell Barton, Brecht
van Lommel (quick first pass review in person)
Maniphest Tasks: T69460
Differential Revision: https://developer.blender.org/D5893
This commit introduces flags to tag the PBVH nodes as fully masked or unmasked. This is used in do_brush_actions to filter fully masked nodes during a stroke. Other tools can also be updated to use this flags.
Sculpt updates now require a flag to update the mask or the vertex coordinates.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5935
The OptiX device only loads the denoising kernels when the "use_denoising" feature is active. This was not set by the calling code however and therefore they were never loaded and attempting to launch them failed (see T69801).
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5946
The "optix_devices" array was not freed on exit, which caused a memory leak (see T69801).
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5944
Currently, we use the crosshair cursor in Sculpt mode, but not in the other paint modes.
- Sculpt Mode: This crosshair cursor is too weighty.
- Texture, Weight, Vertex Paint: Using the arrow cursor for painting is not right.
This commit makes the following changes:
- Use the new special paint crosshair instead
- Use this cursor in all paint modes, not just Sculpt
Reviewed by: Brecht
Differential Revision: https://developer.blender.org/D5940
`RNA_property_overridable_get()` need the original RNA property (i.e.
the actual IDProp in case it is one), not the 'proxy' type property
returned by `rna_ensure_property()` for IDProps.
Makes custom properties of library overrides editable at last, now we
only have to keep them overridden values!
This reverts commit 44d042094e and adds a
simpler workaround for just the node links display issue. There are other
issues though so this is not a full workaround.
The upper bar (containing file path, navigation and display buttons) may
now be split into two rows as horizontal space is reduced.
The first row contains the navigation related buttons, the lower one the
filter and display related ones.
Mainly solves the issue where the file path and search buttons became
barely usable in tight layouts, but generally makes things better for
such cases.
Main reason for doing this is that the navigation buttons are very
close to the file list now, making them much faster to reach.
Initially we let the upper bar (the one with the file path, navigation
and display buttons) use full area width, because designs back then had
more horizontal space problems. The designs have changed meanwhile, and
horizontal space is less of an issue.
However, when the file browser is shrunk horizontally, or if it's open
in a small area (e.g. see "Shading" workspace), having the tool region
open brings back the space issues. But even the file list layout becomes
problematic then, and the same issue was present before the new file
browser design, so we've decided this is an acceptable tradeoff.
* We don't show the prompt when invoked through the button either
* Creating directories isn't a destructive action and it's not dangerous
* The prompt is annoying and users often requested getting rid of it
This change is applied to both, the default and the industry compatible
keymap.
Also applies to some other sculpt tools like filter and mask expand.
The full update happens after the paint stroke is finished, so it does not
happen on view navigation, which would cause a delay.
Ref T70295
Differential Revision: https://developer.blender.org/D5922
This improves performance of some sculpt tools, particularly those that modify
many vertices like filter and mask tools, or use brushes with large radius.
For mask expand it can make updates up to 2x faster on heavy meshes, but for
most tools it's more on the order of 1-1.1x. There are bigger bottlenecks to
solve, like normal updates.
Ref T70295
Differential Revision: https://developer.blender.org/D5926
This is under the assumptions that each node has enough work to avoid
the threading overhead, while also having a possible variable amount of
work. For example most of the vertices being masked or outside of the
brush radius.
Improves performance by about 10% for tools like mesh filter on an
entire 3 million poly mesh, tested on a quad core.
Ref T68873
This mostly happens automatically anyway since there is usually not enough
time left over for it. But when it does it happen it breaks partial redraw,
and may also have a negative impact on responsiveness.
Ref T70295
Assuming it's actually necessary to do this check very efficiently,
replace the hack based on caching a pointer, with a different one
that caches the string comparison result in the operator object.
Should speed up eevee mesh update a tiny bit in certain particular cases
(deform modifier + (shader using texcoord (but not generated output) OR
principled bsdf OR geometry node (except tangent output))).
Snake Hook: make it more clearly different from Grab, and also better communicate what it can do
Pose: remove arrow, which was hard to see anyway
Pinch: make arrows larger and more visible
This adds the same high quality cursors on macOS as we have on Windows.
These are stored as 32*32 pt PDFs, same as the built-in OS cursors
Reviewed by: Brecht Van Lommel
Differential Revision: https://developer.blender.org/D5907
This commit introduces the following changes:
- Invert the direction of the brush strength WM control. It was working in the opposite direction to any other control in Blender. Now dragging to the right increases the strength.
- Increase the alpha of the cursor
- Remove the font shadow of the numbers in the WM control. It was adding too much visual noise when rendered on top of the brush alpha
- Add a second circle to preview the strength in the cursor
- Increase the resolution of the cursor circles. Now they look smooth even when working with large brush sizes.
- Add a line preview to display the brush curve
- Don't offset the cursor preview when changing size and strength
Reviewed By: billreynish, brecht
Differential Revision: https://developer.blender.org/D5889
This commit enables OpenVDB adaptivity in the voxel remesher. It can be useful to reduce the polygon count if you want to switch to dyntopo after using the voxel remesher workflow.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5918
With the previous behavior, it was impossible to manipulate areas with a lot of complex shapes like fingers, as the pose origin was calculated only with the topology inside the radius.
With pose offset, the previous method is used to calculate the direction of the "bone", and an extra offset is added on top of it. This way you can set the pose origin in the correct place in this kind of situations. The pose factor grows to fit the new rotation origin.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D5841
We should not be updating the cache true location there.
This commit also fixes the snake hook default alpha.
Reviewed By: brecht
Maniphest Tasks: T56497
Differential Revision: https://developer.blender.org/D5915
This fixes some artifacts when working on curved surfaces. Previous
behavior was with accumulate on, so that is now the default.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D5826
Was caused by DRW_mesh_batch_cache_get_edituv_faces_stretch_area called
after DRW_mesh_batch_cache_create_requested. So it was created on the wrong
object/mesh.
The 'add mode' was a `short` between -1 and 2 inclusive, and magic numbers
sprinkled throughout the code. It's now an enum with descriptive names.
No functional changes.
This patch replaces D5787. Now instead to replace the startup.blend file, all the changes are done in versioning and moved to shared module to be reused by Brush reset.
Reviewers: brecht, mendio
Reviewed By: brecht
Subscribers: pepeland, mendio
Differential Revision: https://developer.blender.org/D5913
Workaround that does not fix the real issue.
The bug is caused by glBufferData inside
DRW_instance_buffer_finish > GPU_vertbuf_use
but only after the selection code which resets the number of items in
idatalist->pool_buffers.
I don't understand why this is happening as the vbo ids are all valid and
no error is reported. What is even more strange, is that it affects another
vbo which has no connection with the ones in DRW_instance_buffer_finish.
When using the samples, the interpolated points get abrupt steps because the system cannot receive all events in a short period of time.
This is more noticeable when the samples are set to 10 and the pen is moved very fast. The problem with post-processing smooth is that is applied to all stroke and this removes details.
The smart smooth is automatic and detect only the segments in the stroke where the system was unable to capture all movements and apply a smooth algorithm.
Since our ffmpeg is built with openjpeg support and thus can decode jpeg
2000 (in both J2K and JP2 codec flavors as well as high bitdepths), added
these extensions to the supported list.
Also IMB_ispic > IMB_ispic_type > imb_is_a_jp2 was only testing for jp2,
now do both jp2/j2k.
Reviewers: brecht
Maniphest Tasks: T70276
Differential Revision: https://developer.blender.org/D5909
The first element of the loop was not calculated for all onion modes. For select mode the first selected is used, for other modes the first frame in the layer is used.
visible in the viewport
Seems to be an issue of not correctly freeing the PTCacheEdit (see
T68645 for details), after discussion with sergey we went with the quick
and dirty fix to free the path cache early for now. Other solution of
freeing it in 'psys_cache_paths' for the non-evaluated psys [which would
also fix the particle delete, then undo crash from T69000] needs more
deep investigation and, possibly, reconsideration.
Reviewers: sergey
Maniphest Tasks: T68645
Differential Revision: https://developer.blender.org/D5755
Caused by rB914427afd512.
Since above commit 'pe_get_current' checks for an active depsgraph. This
caused the skipping of handling
`PT_CACHE_EDIT_UPDATE_PARTICLE_FROM_EVAL`for everything calling
`PE_get_current` (this passes a NULL depsgraph as opposed to
`PE_create_current`). So we now pass a depsgraph here as well...
Note there are two RNA cases where we pass NULL, namely
- rna_ParticleEdit_editable_get
- rna_ParticleEdit_hair_get
I guess these should be fine though (no functional change to current
master)
Reviewers: sergey
Maniphest Tasks: T69488
Differential Revision: https://developer.blender.org/D5752
This patch adds paint symmetry support to Quadriflow. It bisects and mirrors the input and the output from the remesher to build the final mesh using the preserve boundary option.
This is also an important performance improvement in Quadriflow because it only needs to process half of the mesh with half the resolution.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D5855
This commit fixes most of the issues we currently have in the voxel remesher. Mesh volume is preserved when doing multiple iterations, so the sculpt won't shrink and smooth each time you run the remesher. Mesh topology is much better, fixing most issues related to mask extraction and other topology based operations.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D5863
- Update default values of current tools
- Create default values for new sculpt tools
- Update the color of the cursor to match the color of the tool icon
Reviewed By: jbakker, brecht
Maniphest Tasks: T68745
Differential Revision: https://developer.blender.org/D5813
- Fix vertical spacing in grab brush grab active vertex option
- Move Remesher popover in the top bar to the right of Dyntopo
- Move topology automasking to the options subpanel
- Remove voxel remesher button from the topbar
- Add default shortcut to voxel remesher [Ctrl R]
- Add default shortcut to quadriflow [Ctrl Alt R]
- Add set pivot position operator to the sculpt menu
Reviewed By: billreynish
Differential Revision: https://developer.blender.org/D5880
The idea is to ignore dependency which comes via rigid body solver.
Reviewers: mano-wii
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D5900
This was more of a general nvidia driver bug. Was caused by a
drawcall that had 0 vertex count. This worked in normal drawcalls
but not in indirect drawcalls.
If fade_time is used, particles would be flagged PEK_HIDE (depending on
time settings), but since this is not respected in drawing in 2.8 yet
the user would have no indication of them keys being hidden.
Also doing this for hair doesnt make much sense anyways...
Reviewers: jacqueslucke
Maniphest Tasks: T70259
Differential Revision: https://developer.blender.org/D5901
Even though hidden/faded keys are not supported in drawing in 2.8 yet,
the selection tools should not be able to select non-visible keys.
Spotted while looking into T70259
Reviewers: JacquesLucke
Differential Revision: https://developer.blender.org/D5902
There was a mix of old and new constants. Now have one list of WM_CURSOR_*
cursor types, using GHOST standard cursors when available and otherwise falling
back to our custom cursors.
Ref D5197
* Add more standard cursor types, that platforms can optionally support.
* Remove a few unused cursor types that were not properly supported and
would show the wrong cursor when used.
* Add native cursor files for Windows. These scale well with DPI and have
anti-aliasing. Designed by Duarte Farrajota Ramos.
Ref D5197
Deformation of subdivision surface modifier was using wrong coordinates
for the coarse mesh: as the modifier flow goes the coordinates are to be
taken from the input array of coordinates.
Simplify it a bit, hopefully make it clearer, better var names, use
proper types for arrays of vectors, etc.
No behavioral change expected (except for corner-case of vertices being
used by more than 255 edges, which were sort of 'clamped' to those 255
first edges for the smoothed position computation previously, now we use
proper integer, which fixes that bug).
Previously the cache for the modifier would not be invalidated if
modifier settings were changed with drivers or keyframes.
Now we compare the current setting with the ones used to generate the
cache and invalidate the cache if they differ.
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D5694
When move very fast the pen using a tablet, the end of the strokes was very ugly if the sampling was enabled. The reason for that is the last point and the previous one was interpolated in distance, but not in pressure and strength.
This commit uses several processes to get better endings:
a) If the pressure at the end of the stroke is very low, this part of the stroke is removed. This is a common issue with some tablet that send events with very low pressure when the pen is raised from drawing surface.
b) The interpolated points created by sampling are interpolated in strength and pressure to get a smooth transition.
c) Active smooth also uses the strength. Before only pressure was used.
The config.h file is autogenerated during compile by a 3rd party library
quadriflow uses. Now we put this file in the build directory to avoid
adding this to the git repository in the future.
Was caused by some drawcall not being done if the volumetric resolve pass
was drawn (using dual source blending seems to be the cause).
Not sure why this is needed since it is still reset before the next
drawcall.
When calling make.bat multiple times to rebuild blender
make.bat failed to rebuild if a custom build dir was set.
reported and fixed on chat by @dgsantana
The `pose_bone_do_paste()` function is documented to only return a
non-NULL pointer on a successful paste, and the one caller that checks
the return value is expecting this behaviour. However, before this
commit, when a valid pose channel was found, 'Selected Only' was
enabled, and the bone was not selected, the function would still return
non-NULL. This resulted in auto-keying pose channels that were not
pasted.
Reviewed by: angavrilov
Differential Revision: https://developer.blender.org/D5891
This change makes it so motion paths are using minimal possible
dependency graph which is sufficient to evaluate required motion
path targets.
Disclaimer: granularity is done on ID level, but it is possible
to go more granular if really needed.
Brings time down to 0.5 sec when updating motion path for the
Rain animation file used for benchmarks in the previous commits.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5874
The title explains it all actually: this commit introduces special
dependency graph builder API which builds graph which is sufficient
to evaluate given set of IDs.
The idea is to only update parts of motion paths which lies between
keyframes around changed frame.
The changed frames are considered to be from second previous to
second next one to work correctly with bezier handles interpolation.
Brings updates in the Rain test animation file from around 11 sec
down to 1 sec.
For now, do not allow to add custom props to overriding IDs (this should
be possible in the future, by getting basic correct behavior here is
already fairly hard, no reason to complicate things even more).
Also, properly disallow editing of existing custom props in overriding IDs.
Do not see any reason not to copy over the flag of the old, existing
IDProp to the new one when assigning (e.g. `C.object['prop'] = 0.5`
would nuke that IDProp flag).
The triple possible status of an PropertyRNA (actual C-defined prop,
py-defined IDprop behaving similar ot RNA one, or actual 'pure' custom
prop) is really confusing... Not to mention the _RNA_UI ugly thingy on
top of that. :/
Cycles casts a pointer from ShaderDataTinyStorage to ShaderData, these structs by default had different alignments however (the former was 1-byte aligned, the latter 16-byte). This caused undefined behavior on at least the CUDA platform. Forcing both structs to use the same alignment fixes this.
CUDA toolkits newer than 10.1 run into this because of a compiler optimization.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5883
Don't just rely on a comment next top the code, do an assert as well.
Also, don't use `default` since that silences compiler warnings when
new enumerators are added and related code is to be verified.
More switch statements might need an adjustment, but this is something
what is easier to go over by Pablo.
This change is two-fold:
- Ensure the result of the F-Curve evaluation is stored on the FCurve
object. This was done in 2.79 but lost when we moved to more granular
per-curve evaluation from the depsgraph.
- Flush this result from the CoW copy back to the original.
Reviewed by: sergey
Differential Revision: https://developer.blender.org/D5888
The tricky part here is to support a hidden parent and a "visible" child
collection. In this case the object should obviously be invisible. It is
all working now.
This gives better idea of what's going on with your track. Example:
{F693806}
Color of keyframes are configurable from theme editor of clip editor.
Reviewers: keir, brecht, Severin
Differential Revision: https://developer.blender.org/D2772
Blender now calls render hooks before taking copy of `scene->r` in
`RE_RenderAnim()`.
A change to the render output filename made in the render-init hook
would not be picked up by by the copy. As a result, placeholders were
touched using the old name, whereas the rendered images would be saved
with the new filename.
Reviewers: sergey
Maniphest Tasks: T66555
Differential Revision: https://developer.blender.org/D5887
When doing simple scenes the displacement shading failed during final
rendering when the displacement method is set to `Displacement + Bump`.
When this option is enabled the shader uses the Vector math
node. This node is part of the node group level 1. When doing simple
shading only using nodes that are part of the node group level
0 the shading was rendered black.
This only happened in final rendering as there the OpenCL programs are
optimized to save registries. Viewport rendering rendered correctly
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5859
Draw Sharp: More pronounced difference between it and Draw
Mask: Fits in with other similar tools
Border Hide: Fits in with other similar tools
Pinch: Much better communicates what it does
Simplify: Fix a small issue with caused by inverted normals
Modifier stack evaluation would copy mesh settings other than mesh topology
automatically, outside of the individual modifier evaluation. This leads to hard
to understand code, and makes it unclear which settings are available in following
modifiers, and which only after the entire stack is evaluated.
Now every modifier is responsible to ensure the mesh it outputs preserves materials,
texture space and other settings, or alters them as needed.
Fixes T64739: incorrect texture space for various modifiers
Differential Revision: https://developer.blender.org/D5808
These were only strictly valid for texture space calculation, don't store them
since they should not be used after that. Only store a flag to indicate if the
auto texture space has been evaluated.
In the future it might make sense to store bounding boxes at the mesh level to
speed up bounding box computation for multiple objects using the same mesh, but
then it will need to be implemented differently.
This makes a lot of shader node wiring code less complex.
This only add the flatten mechanism (which fixes T69672).
~~Cleanup to remove the complexity in ntree_shader_relink_displacement,
ntree_shader_bump_branches and ntree_shader_tag_nodes will be commited
separately.~~(already included)
The code is only added for shader nodes for now but could be exported to
other internal nodetree types in the future.
Cleanup: Node Shader Tree: Remove GPUmaterial special nodegroup handling
Reviewers: brecht
Reviewed By: brecht
Maniphest Tasks: T69672
Differential Revision: https://developer.blender.org/D5829
This happens to be a non-behavioral change, but previous code here was
*very* confusing, and only ended up generating expected results by mere
chance (since `facepa[i]` == `totpart` in case the face has no (valid)
particle, i.e. `pa == NULL`)...
Systematically reset particle pointer to NULL and use it to detect
invalid particle case, instead of checking value of the face's
particle index everywhere in a confusing and prone-to-bug way
(see T70150 and previous commit).
No behavioral change expected here.
There’s be a lot to say about that explode modifier code, for now just
follow other places in code... But the handling of 'invalid'/'unkown'
particle case is... quiet confusing to say the least.
Before when Onion or Multiframe was enabled the VBO length was the total of points on the object for all frames and this results in a big size when the scene had a lot of frames.
Now, the size of VBO length is calculated more precisely and reduce the time to alloc the VBO.This also reduce memory footprint.
The selection was not working because the evaluated frame was only working for active frame, so when the evaluation was changed to use eval data instead of original data, the data was not available and the loop did not use it.
Related to T70116
E.g. entering the file path field and then pressing enter without any
change would call an unneccesary directory change, causing flickering.
So the main point of this is to avoid flickering.
Without this the text field could also be used to refresh the file list,
but for that we have a proper button.
The big options button in the lower left is now gone, it's replaced by a
smaller icon toggle button in the upper right.
That means I could also remove code for the region we had just for this
button.
I also added versioning code for the removal, to make sure the region is
removed cleanly when reading old files.
Pablo and William agreed that the main purpose of the layout should be
to list files in a way that it's easy see which files were
created/modified when. Previously it was set to "Long List" to show the
modification time, now the vertical list is much better suited. The time
is shown anyway.
For the default keymap we were only using the regular toolshelf
operator, doing this for the industry compatible keymap too now (we
could even remove it there, we don't use it in other editors).
Since we "now" have proper operators for toggling regions, this specific
one is totally redundant.
So far the file browser code had some lazy creation for the tool region,
even though it should always be there. The only reason I can see for
this is compatiblity. So I simply added versioning code to add the
region in case it's not there. Now we should be able to savely assume
the tool region to be there, whithout any unusual lazy-creation.
This makes it so that regions only needed when the file browser is
invoked as an operation (e.g. Ctrl+O rather than a regular editor) are
lazy created then, and removed if the file browser is changed into a
regular editor then (e.g. Ctrl+O over regular file browser editor ->
Cancel).
That should remove some troublesome assumptions and makes versioning
redundant.
It also fixes the issue of an empty execute region at the bottom after
cancelling a file operation invoked from a regular file browser editor.
This would happen when opening a file browser as regular editor, opening
a temporary file browser from there (e.g. Ctrl+O) and cancelling the
operation.
In some cases this would cause most of the editor to be filled with an
empty operator options region:
* Go to Shading workspace
* File -> Append
* Cancel
The new paint cursor (introduced in rBe0c792135adf) mixed 3d and 2d
drawing leading to asserts [e.g. when tablet pressure sensitivity was
enabled for size, see D5820 also].
We could get away with always drawing in 3D [using vertformat with
comp_len 3 / GPU_SHADER_3D_UNIFORM_COLOR / imm_draw_circle_wire_3d],
even if in the Image Editor, but this patch clearly separates what is
drawn in 3d and what is in 2d.
part of T69957
Reviewers: jbakker
Differential Revision: https://developer.blender.org/D5836
When setting an object draw type to Solid it always used the Material
color mode. This change only sets the material color when the viewport
is set to display textures.
Steps to reproduce were:
* Open Preferences in a new window (Edit -> Preferences)
* Set file browsers to open fullscreen (Interface->Editors->Temporary
Windows)
* Open a file browser in the Preferences (e.g. Add-ons -> Install)
The file browser would be opened in the parent window, rather than the
preferences.
If the file browser was opened from an existing file browser editor
(using File -> Append would make the mouse hover the file browser in the
Shading workspace), we need special handling for closing the fullscreen
area.
This change brings back the old way of handling fullscreen closing.
I'm not sure how a .blend file could get into this state, but apparently
for some files saved with versions of Blender after the file browser
changes, the execute region would not have been created. File browser
code assumes this region to be there however.
Luckily I found a file with which I could recreate the issue. My guess
is that the error only happens with files that were stored before
certain versioning fixes were done after the file browser redesign.
To fix this, we just let the versioning code for the execute region run
even with newest files. We can run this safely, it only acts if the
execute region actually doesn't exist.
Creases are stored by the vertex indices of the edges. Sometimes they
were stored with (v1, v2) when the edge itself was stored with (v2, v1).
We now search for both orientations.
Sorting the vertex indices before searching avoids the second search
altogether when loading the example file of T70021.
time change
followup to 815ca2310f, this one fixes the RNA_MeshLoopColor case, adds
RNA_VertexGroupElement and RNA_LatticePoint.
coop with @sergey, thx.
Fixes T68666
The parent hairs were written to Alembic even when the 'Parent Particles'
checkbox (`use_parent_particles`) was disabled. In this case the parent
hairs were not correct in Blender's memory, and thus also not correct in
the exported Alembic file. The Alembic exporter now respects this setting
and doesn't write the parent hairs when 'Parent Particles' is off.
Python3.7 is still fairly recent, not all distro use it as system python
yet, fallback to code compatible up to py3.5.
Also, often distro builds of Blender do not have the buildinfo, in that
case fallback to `SOURCE_DATE_EPOCH` envvar, and as last resort to
current time, as in orig patch D5756 (we still use blender builddate
when available).
Issues raised in recent own rBcd5c70630318.
Steps to reproduce were:
* Add a new collection
* Put an object into it
* Exclude the selection (the checkbox in front of the name)
* Enable "Local Collections" in any viewport
-> Crash
Did not skip the excluded collections, causing an unsuccessful object
lookup (returned null-pointer).
The problematic video from T68091 clearly has an invalid stream duration
(it would be 55 centuries long if interpreted at 30 FPS, and given that
it was recorded with an Android 9 device, it's unlikely that recording
started that long ago). I've added a heuristic to check the stream
duration against the container duration; if the stream is more than 4x
longer than the container, Blender now falls back to the container
duration.
We could use MIN(stream duration, container duration), but there might
be video files out there where the container duration is less precise
than the stream duration; they are measured in different units of time
(microseconds for the container vs. frames for the stream).
Includes a unit test for the above heuristic.
Reviewed by: jbakker
Differential revision: https://developer.blender.org/D5853
This was introduced in FFmpeg lavf 55.1.100 in 2013. For systems that are
still on LibAV or older FFmpeg there is a fallback implementation that
performs the same guess as we did before in `av_get_r_frame_rate_compat()`.
There is now a clearer distinction between `video_stream` (the stream itself)
and `video_stream_index` (its index), and no more repetition of accessing
the same item of an array. This also makes the code a bit more readable in
preparation for an upcoming functional change.
Otherwise --factory-startup would e.g render as `Keep User Interface`
(which is supposed to be `New Window` by default)
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5851
From rBe7a514369fe70, since I did not have time to do proper review
in D5808...
Note that we could also consider that shallow copy of src should never
be dst of that function and add some asserts instead. For now going the
safest and simplest way though.
This is a regression since PBVH was introduced for weight paint.
The solution is: treat subsurf and multires modifiers as deforming
ones for the weight painting. This is an easiest solution to make
PBVH use subdivided location of original vertices.
This change could simplify some of the weight paint by removing
the grids check, since PBVH is not supposed to be built from grids
in this case anymore.
Differential Revision: https://developer.blender.org/D5751
Currently unused but the intention is to use this to hook up these
modifiers to a generic deformed PBVH to make it easier to sculpt or
paint on a subdivided mesh.
The problem was that the object and collection pointers in Base and
LayerCollection would get lost of file read. Normally such ID pointers would
be resolved by pointing to an ID_ID placeholder which has the datablock name,
and then replacing it will the real datablock. However ID_ID is only written
for directly linked datablocks.
This adds the concept of an indirectly linked datablock with a weak reference
to it. For this we write an ID_ID_WEAK_REF code, which is a reference that
will only be resolved if the datablock was read for another reason.
Differential Revision: https://developer.blender.org/D4416
Modifier stack evaluation would copy mesh settings other than mesh topology
automatically, outside of the individual modifier evaluation. This leads to hard
to understand code, and makes it unclear which settings are available in following
modifiers, and which only after the entire stack is evaluated.
Now every modifier is responsible to ensure the mesh it outputs preserves materials,
texture space and other settings, or alters them as needed.
Fixes T64739: incorrect texture space for various modifiers
Differential Revision: https://developer.blender.org/D5808
Knife project switches out of vertex selection mode, but wouldnt do this
for all participating meshes.
Logic in edbm_select_linked_pick would switch the viewcontext multiple
times and the meshes selectmode was not in sync then, leading e.g.
finding a vertex in 'unified_findnearest' (because last of the meshes
selectmode was SCE_SELECT_VERTEX), but then later in
'EDBM_elem_from_selectmode' other meshes selectmode was not matching
SCE_SELECT_VERTEX, leading to crash...
Reviewers: campbellbarton
Maniphest Tasks: T68852
Differential Revision: https://developer.blender.org/D5536
As the layer and frame memory was duplicated, the pointers were connected to old data. This was solved when saved the file, but this was a bug. Also this required a duplication and clean all listbase items.
Now, instead to duplicate and clear memory for layers and frames, just create a new layer and frame. This solution fix the problem, it's faster and also keeps the code cleaner.
It makes much more sense to use the build timestamp of the Blender
binary used to generate that manpage, than the current time.
As a bonus, when Blender building makes use of the SOURCE_DATE_EPOCH envvar
(through CMake, since previous commit), this also propagate automatically
to that man page.
Inspired by D5756 by Bernhard M. Wiedemann (@bmwiedemann), thanks.
Use cmake TIMESTAMP for BUILD_DATE+TIME
this simplifies code a lot
and even makes it more portable to other platforms
TIMESTAMP is available since cmake-2.8.11 ; blender already requires
cmake>=3.5 so that is fine.
Note that with CMake>=3.8, if defined, the SOURCE_DATE_EPOCH envvar
will be used by CMake here.
Reviewers: mont29, campbellbarton
Reviewed By: mont29, campbellbarton
Differential Revision: https://developer.blender.org/D5760
This commit also removes the name "voxel" from the messages because this function
is now used for the voxel remesher and quadriflow.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5842
This was caused by rB309cd047ef46.
Above commit introduced code that would skip early for sculptmode
(leaving out the neccessary createTransPaintCurveVerts).
Reviewers: pablodp606, jbakker, mano-wii
Maniphest Tasks: T70006
Differential Revision: https://developer.blender.org/D5837
Particularly noticeable when vertex painting with a subsurf modifier.
In some cases every sculpt or paint stroke step would evaluate the dependency
graph. This should only happen for redraws. Now more selectively choose if the
dependency graph should be evaluated to initialize the view context. Doing it
in the view context evaluation is somewhat hidden, now it's more explicit.
Differential Revision: https://developer.blender.org/D5844
That code is simpler and more general (not limited to some specific
values of thread numbers). It still gives similar default chunk size as
what we had before, but handles smoother increase steps, and higher
number of threads, by keeping increasing the chunk size.
No functional change expected from that commit.
When the grab brush was used in an empty frame, a new frame was created, but as the depsgraph was no tagged, the evaluated data was wrong and the Grab hash failed.
If children hairs were displayed in particle editmode, these would not
update when a particle was deleted.
Reviewers: sergey
Differential Revision: https://developer.blender.org/D5840
The static mesh issue described in T65816 has been resolved by @Sergey
in T60094.
This commit fixes the last bit of the puzzle, which was two-fold:
- A missing depsgraph update when setting `orig_object.data = new_mesh`
from Python. Thanks @Sergey for providing the fix :)
- Properly locking the interface while exporting. This prevents crashes
as described in T60094. The previous approach of calling
`BKE_spacedata_draw_locks()` was not enough.
This reverts commit b962aca800. We may revert
to the fullscreen file browser if it's not good enough by the time of the 2.81
release. But then it first needs some changes since the in between state now
is not good enough either.
This allows to create different effects with some brushes that use the sculpt plane.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D5818
Fullscreen as in, maximized area.
This may be a temporary change until we consider the temporary window
mode as working well enough.
Note that you can still enable the windowed mode in the Preferences
(Interface > Editors > Temporary Windows).
Addes a Preference setting to choose between opening new file browsers
in a maximized area (like with the old file browser) or in a new window
(like the new one).
Moves the render display type (to choose between rendering in a new
window, in a fullscreen area, in an Image Editor, etc) from the scene to
the preferences.
The active object can be `NULL`, which causes a segfault in
`BKE_object_is_in_editmode(NULL)` (and if that were made NULL-safe, the
segfault would happen further down in `object_remesh_poll()`).
The old min/max options specified the target min/max values, they didn't
act as min/max operators. So the versioning code should be adjusted
accordingly.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5828
Make a distinction between flush sculpt changes for rendering, and forcing
sculpt data structures to be rebuilt after mesh changes. Also don't use PBVH
for renders.
The new paint cursor (introduced in rBe0c792135adf) could crash for 2d
painting without an active object.
Note there are still drawing asserts (because we are mixing 2d and 3d
drawing in 'paint_draw_cursor'), but these will be handled in a seperate
commit.
part of T69957
Reviewers: jbakker
Maniphest Tasks: T69957
Differential Revision: https://developer.blender.org/D5820
Curve edit points could disappear when the deformed curve is out of view
area. Fix similar to rB0f983e854052.
Reviewers: jbakker
Maniphest Tasks: T69687
Differential Revision: https://developer.blender.org/D5748
When starting automaking from a boundary vertex it was only updating the automasking factor in connected boundary vertices. This also fixes other similar functions like mask expand or dynamic mesh preview.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D5812
This commit makes the pose brush easier to control. It also includes a refactor of the pose brush init code.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D5761
The `do_update` variable wasn't set after changing the `progress`
variable, causing the GUI only to update on redraw (f.e. when the user
was waving the mouse around).
Using pointers instead of references when passing progress variables
makes the C++ code more in line with the C code (as it doesn't transform
pointer parameters to reference parameters). Also makes it easier to
spot when a common Blender pattern is implemented incorrectly (fix will
be in the next commit).
Display of velocity and acceleration units should be affected by unit scale.
Arguably the behavior of the physics simulation should be for gravity to remain
constant, but such design changes are outside the scope of bug fixing. At least
the UI should correctly reflect what the physics simulation will do.
Small memory reduction change by only storing the pixels of the combined
pass when it is being shown in the viewport. Previously the combined pass
was always calculated and present in the output buffer. The combined pass
will still be calculated.
It is a limitation in Blender that Cycles always had a combined pass.
This patch will remove the limitation from the code base of Cycles.
Blender still has the limitation, but will always request the combined
renderpass when doing final rendering.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5784
Another sneaky bite from the infamous private ID data: While those
monsters are not in bmain, the actions used by their animdata are
regular cute little ID's, living with the herd in the safe and sound
Main DB...
So we have to be careful not to propagate the nasty black magic
required to handle the formers when we duplicate their animdata.
Saying it again: private ID datablocks should never have had their own
animdata & actions, this is endless issue also with RNA paths... And
makes copying of animation between materials and such needlessly
complicated.
As per Brecht's suggestion, use the check_existing property to control
visibility of the '+' and '-' icons. It is typically set for save
operations.
Adds another FileSelectParams flag (to avoid duplicated propertie
lookups) and removes the recently introduced
FileSelectParams.action_type again.
Fixes T69881.
That's exactly why we should get rid of all those 'custom cases'
remapping code, it's hard enough to keep a single place
(library_query.c) up to date and 100% valid, but having more areas doing
their own remapping is just impossible to maintain... Some day...
Most of these calls were replaced with the successors as suggested
by Xcode's Fix-It. Functionality should not be affected.
This reduces the number of warnings when building on macOS.
Picked up while investigating a build error on the functions branch
which seems to use this specific header in a way master doesn't.
The problem:
The MSVC headers define a `_CONCAT` macro, so does BLI_kdtree_imp.h
however at the end `BLI_kdtree_imp.h` undefines the macro making the
MS headers that still rely on it "unhappy".
Who's fault is this:
Ours, C99 Spec says
```
7.1.3 Reserved identifiers
- All identifiers that begin with an underscore and either an uppercase letter or another underscore are always reserved for any use.
...
if the program removes (with #undef) any macro definition of an identifier in the first
group listed above, the behavior is undefined.
```
So we should not have defined it, and we definitely should not
have undefined it.
We have *tons* of these violations, although fixing them would be great
at one point lots of them are in /extern or in the 3rd party deps,
I'd rather deal with them on a case by case basis when it actually
causes issues.
Differential Revision: https://developer.blender.org/D5790
Reviewers: campbellbarton, JacquesLucke
The compiler was warning that it assumed that
crfa - 4 < cfra is always true even though that might not
be the case due to overflow. This patch just removes
the condition that caused the assumption.
The function now allows custom return types defined
by the callbacks. This can be useful when a user of the
data structure has to implement some custom behavior.
Fades add:
Adds or updates a fade animation for either visual or audio strips.
Fade options:
- In, Out, In and Out create a fade animation of the given duration from
the start of the sequence, to the end of the sequence, or on boths sides
- From playhead: the fade animation goes from the start of sequences under the playhead to the playhead
- To playhead: the fade animation goes from the playhead to the end of sequences under the playhead
By default, the duration of the fade is 1 second.
Fades clear:
Removes fade animation from selected sequences.
Removes opacity or volume animation on selected sequences and resets the
property to a value of 1.0. Works on all types of sequences.
Author: gdquest
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D5166
Functions that utilize glyph cache should lock and unlock cache by
calling `blf_glyph_cache_acquire()` and `blf_glyph_cache_release()`.
Function `blf_glyph_cache_acquire()` will create glyph cache, if it doesn't exist.
Locking mutex is global and shared by all fonts.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5701
When enabled prefetching(preview panel>view settings), a pernament running job
is created, that will render frames in the background until the cache is full.
If the cache is not filled fast enough, prefetch job suspends itself
at the last moment and will wait until it has chance to "catch up".
Effectively this will decouple rendering to separate thread, so rendering
itself is a bit faster.
Cache recycling behavior will be changed to "free furthest frame to the left
of playhead if possible, otherwise rightmost frame".
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5386
paint mask selection
followup to rBr27bbe7cbd9b, might as well make this consistent across
all the color operations [with the exception of 'Dirty Vertex Colors'
which is python]
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5786
without a valid target
rB95b9680597f5 introduced code that would skip creation of GPUVertBuf
for ParticlePointCache if the keyed physics would not have a valid
target. Missing vertex buffer would lead to assert/crash.
This code is now removed (dont see a reason why this was done? afaict
2.79 also just displayed the particles without physics in this case and
this seems to be working just fine in 2.8 as well)
part of T69741
Reviewers: fclem
Maniphest Tasks: T69741
Differential Revision: https://developer.blender.org/D5781
Support per-viewport collection visibility options.
Note 1: There is no way to show a collection that was not visible before
due to depsgraph. Otherwise we would risk having all the collections in
the depsgraph and I believe this is not the idea.
An alternative would be to have a new depsgraph for viewports that are
not local. Something to keep in mind if we do per-viewport current frame
in the future.
So for now what we do is to only allow collections visibility to be
disabled/hidden in this mode.
Note 2: hide_viewport (the eye icon) doesn't really matter for
depsgraph. So after the merge we can still ignore it to show the
collections locally in a viewport with no problems for the depsgraph.
Reviewers: brecht, sergey
Subscribers: billreynish
Related task: T61327
Differential Revision: https://developer.blender.org/D5611
Split "use_mesh_automerge_and_split" and "double_threshold" into their
own column so .active doesn't have to be applied for the entire layout.
Reviewers: billreynish, mano-wii
Differential Revision: https://developer.blender.org/D5618
mask selection
for 'Invert', 'Levels', 'Hue saturation Value' and 'Bright/Contrast',
face mask was respected, but vertex mask wasnt...
Same code as done in 'Set Vertex Colors'.
reported in T69835
Reviewers: brecht
Maniphest Tasks: T69835
Differential Revision: https://developer.blender.org/D5783
Picking the 'Target Object' as well as the 'System' number was greyed
out as long as 'Use Timing' was disabled. 'Use Timing' is unrelated for
the above two, these should always be active...
part of T69741
Reviewers: sergey
Maniphest Tasks: T69741
Differential Revision: https://developer.blender.org/D5782
Solves stability issues with possibly doing destructive changes to the
tracking setup. Locking interface is the simplest and most reliable way
to avoid crashes.
It is still possible to run non-destructive changes such as clip view
navigation. More operations can be marked as safe if needed.
Fixes T67012: Software closes when a processing marker is deleted
This commit adds some new hashing based data structures to blenlib.
All of them use open addressing with probing currently.
Furthermore, they support small object optimization, but it is not
customizable yet. I'll add support for this when necessary.
The following main data structures are included:
**Set**
A collection of values, where every value must exist at most once.
This is similar to a Python `set`.
**SetVector**
A combination of a Set and a Vector. It supports fast search for
elements and maintains insertion order when there are no deletes.
All elements are stored in a continuous array. So they can be
iterated over using a normal `ArrayRef`.
**Map**
A set of key-value-pairs, where every key must exist at most once.
This is similar to a Python `dict`.
**StringMap**
A special map for the case when the keys are strings. This case is
fairly common and allows for some optimizations. Most importantly,
many unnecessary allocations can be avoided by storing strings in
a single buffer. Furthermore, the interface of this class uses
`StringRef` to avoid unnecessary conversions.
This commit is a continuation of rB369d5e8ad2bb7.
Make popover wider and image ID widget full width, like in textures properties.
Not ideal but at least the image name can be read now, until the ID widget
gets a more compact redesign.
Fixes T67748
Rgression from rBaf4dcc6073fa.
paint_sample_color > imapaint_pick_face uses the the selection buffer
(DRW_select_buffer_sample_point) and to get flat colors [select_id_flat] we
need to be in SCE_SELECT_FACE mode. This was already fine if you had
'Face Selection Masking' turned on, but got colors including lighting
when turned of [select_id_uniform].
There was already an exception in 'select_cache_init' that turns on
SCE_SELECT_FACE for weightpaint, we just need this for texture paint
(vertex paint) as well... Also moved the logic into
select_id_get_object_select_mode.
Note we were also asserting here:
BLI_assert failed: /blender/source/blender/draw/engines/select/
select_engine.c:174, select_cache_init(), at 'e_data.context.select_mode
!= 0'
Note also this is not working correctly for vertexpaint (yet), but has
been discussed in T69752 and there is a solution by @mano-wii in P1032.
Reviewers: mano-wii
Subscribers: mano-wii
Maniphest Tasks: T69752
Differential Revision: https://developer.blender.org/D5775
This patch adds a new Vertex Color node. The node also returns the alpha
of the vertex color layer as an output.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5767
These two data structures reference strings somewhere in memory.
They do not own the referenced string. The string is considered
const.
A string referenced by StringRefNull can be expected to be
null-terminated. That is not the case for StringRef.
This commit is a continuation of rB369d5e8ad2bb7c2.
When reading a old .blend file (from before the new file browser
design), we wouldn't create the execute region for existing file
editors. This usually wasn't an issue, but it could become one when a
file browser was opened in a temporary screen before, and that screen
was still visible. Then code spawning the new file browser would re-use
the old file browser data, assuming the execute region was there.
Handle this in versioning code and let rest of the code keep sane
assumtions (e.g. that there always is a execute region, even if
invisible).
Group related settings in columns:
* Align Inner, Inner Selected and Outline.
* Align Text, Text Selected and Item.
Place Shaded settings in its own sub-panel.
Many generic C++ data structures have been developed in the
functions branch. This commit merges a first chunk of them into
master. The following new data structures are included:
Array: Owns a memory buffer with a fixed size. It is different
from std::array in that the size is not part of the type.
ArrayRef: References an array owned by someone else. All elements
in the referenced array are considered to be const. This should
be the preferred parameter type for functions that take arrays
as input.
MutableArrayRef: References an array owned by someone else. The
elements in the referenced array can be changed.
IndexRange: Specifies a continuous range of integers with a start
and end index.
IntrusiveListBaseWrapper: A utility class that allows iterating
over ListBase instances where the prev and next pointer are
stored in the objects directly.
Stack: A stack implemented on top of a vector.
Vector: An array that can grow dynamically.
Allocators: Three allocator types are included that can be used
by the container types to support different use cases.
The Stack and Vector support small object optimization. So when
the amount of elements in them is below a certain threshold, no
memory allocation is performed.
Additionally, most methods have unit tests.
I'm merging this without normal code review, after I checked the
code roughly with Sergey, and after we talked about it with Brecht.
The local view check in the RNA didn't support instanced objects. Every
object has a copy of the local_view_bits from the base. This patch
changes the check to look at the local stored bits.
This patch removes the check if the object is part of the view_layer.
In the cases we are using it this check is not relevant. The `mesh_tissue`
add-on also uses it, and is not effected by this change.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5773
This patch allows the Voronoi node to operate in 1D, 2D, and 4D space.
It also adds a Randomness input to control the randomness of the texture.
Additionally, it adds three new modes of operation:
- Smooth F1: A smooth version of F1 Voronoi with no discontinuities.
- Distance To Edge: Returns the distance to the edges of the cells.
- N-Sphere Radius: Returns the radius of the n-sphere inscribed in
the cells. In other words, it is half the distance between the
closest feature point and the feature point closest to it.
And it removes the following three modes of operation:
- F3.
- F4.
- Cracks.
The Distance metric is now called Euclidean, and it computes the actual
euclidean distance as opposed to the old method of computing the squared
euclidean distance.
This breaks backward compatibility in many ways, including the base case.
Reviewers: brecht, JacquesLucke
Differential Revision: https://developer.blender.org/D5743
Private ID data (nodetrees and scene collections...) need special care
and handling of their copy flags, and checks must be adapted too.
In that case, issue came from the fact that even though those IDs have
to be copied outside of bmain, we may still require usercount handling.
That commit also fixes a somewhat related issue - we cannot use the
non-id private data copying flag for private IDs copying, due to
difference in handling of usercount again.
This is caused by rB1342d1879e12 and would also break the whole
"Connect" workflow [which relies on empties]
Reviewers: mont29, brecht
Maniphest Tasks: T69582
Differential Revision: https://developer.blender.org/D5772
This diff will add support for local view to Cycles rendered preview mode.
Currently the implementation shows same results as EEVEE does. This entails
a difference with Blender 2.79, where lights were automatically added to the
local view. {T69780} describes this should be solved before the next release.
This patch also solves missing `owner_id` issues when using the RNA CPP Api
from Cycles. Cycles didn't provide the `owner_id` making some functionality
fail, what then was worked around in Blender. It also fixes an issue in
`makesrna` where incorrect CPP code was generated when only `PARM_RNAPTR`
was provided.
An optional `view_layer` parameter is added to the `Object.local_view_get`
method to reduce lookups.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5753
Part of T68930
Now two other mirror options that can be enabled simultaneously: Mirror Y and Z.
Reviewers: campbellbarton
Reviewed By: campbellbarton
Subscribers: ThatAsherGuy
Differential Revision: https://developer.blender.org/D5720
This is caused by rBeb521b22b2b1.
Looks like `PE_minmax` doesnt play nice with the evaluated view_layer.
If we look inside `PE_get_current`, then `BKE_ptcache_ids_from_object`
will actually return a list of `PTCacheID` for the evaluated object.
However, looking further, then `PTCacheEdit` / `psys->pointcache->edit`
is always NULL for the evaluated object.
Without a valid `PTCacheEdit`, `PE_minmax` will basically do nothing.
So now we are passing the non-evaluated view layer in the case of
particles.
Regarding to @sergey, in a longer term we should probably make it so
evaluated pointcache have pointer to edit.
Reviewers: sergey
Maniphest Tasks: T59143
Differential Revision: https://developer.blender.org/D5758
linked sound
Crash could be triggered by just adding any object to the scene.
Reviewers: sergey
Maniphest Tasks: T69558
Differential Revision: https://developer.blender.org/D5764
This is minimal 'flip-switch' commit, proper cleanup and removal of the
option thing will happen later, once we are sure that we can release
2.81 with it enabled.
For now, we have a `--disable-library-override` now. ;)
The sculpt mode transform tool applies the sculpt pivot transformation to all vertices, taking XYZ symmetry into account.
This commit also includes an operator to set the pivot point initial position.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5717
This change allows the user to select a renderpass in the 3d viewport.
Added support for external renderers to extend the `View3DShading` struct.
This way Blender doesn't need to know the features an external render engine wants to support.
Note that the View3DShading is also available in the scene->display.shading; although this is
supported, it does not make sense for render engines to put something here as it is really
scene/workbench related.
Currently cycles assumes that it always needs to calculate the combined pass; it ignores the
`pass_flag` in KernelFilm. We could optimize this but that was not in scope of this change
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5689
This allows accessing it from drivers and using it in UI, as
demonstrated by adding it to the transform panel of 3D View.
As an aside, properly mark transform-related properties of Bone
read-only, as they can only be changed correctly in edit mode.
Makes it possible to do custom edits to animated properties from a
python handler.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5738
Those handlers are usually done to edit scene which is being rendered,
and this is not supported due to a fully localized nature of the preview
bmain.
There is still non-conditional callback in stats_background which is a
bit tricky to cover with check, but this code is not supposed to be run
for previews anyway.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5731
The goal is to make it possible to access evaluated datablocks at a
corresponding context. For example, be able to check evaluated state
if an object used for rendering.
Allows to write scripts in a safe manner for T63548 and T60094.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5726
Allows to access dependency graphs created for render engines
to inform them about changes in .blend file structure from the
Python handlers.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5724
Currently unused, but will allow to keep of an owner of the depsgraph.
Could also simplify other APIs in the future by avoiding to pass bmain
explicitly to relation update functions and things like that.
File Browser Volumes list gets nicer friendly drive names with volume label or device description.
Differential Revision: https://developer.blender.org/D5747
Reviewed by Brecht Van Lommel
For the default and industry compatible keymap, clicking on empty space
in the file browser will deselect all files.
Also makes selection use same operator description we use for other
select operators.
Allows file browser folders to be shown in a theme-selectable color, default of manila.
Differential Revision: https://developer.blender.org/D5713
Reviewed by Brecht Van Lommel
Grab active vertex snaps the maximum strength of the grab brush to the highlighted active vertex, making it easier to manipulate low poly models or meshes with subdivision surfaces.
Dynamic Mesh Preview generates a list of connected vertices from the active vertex and draws them from the cursor code. This helps to visualize the real geometry the user is manipulating from sculpt mode when there are active modifiers.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5646
This happened when the 'Whole Collection' option was enabled next to the
'Use Count' option. These two are exclusive but some code paths only
checked for 'Use Count'.
Reviewers: brecht
Maniphest Tasks: T69702
Differential Revision: https://developer.blender.org/D5741
This operator extracts the paint mask to a new mesh object. It can extract the paint mask creating a boundary loop in the geometry, making it ready for adding a subdivision surface modifier.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5384
This operator is a combined version of mask expand and mask by normal from the sculpt branch. It can be used to quickly isolate parts of a model based on topology or curvature.
- Shift + A starts the operator in topology mode from the active vertex
- Shift + Alt + A starts the operator in curvature mode from the active vertex
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5657
probably makes sense to allow for zero iterations...
Reviewers: jbakker
Maniphest Tasks: T69651
Differential Revision: https://developer.blender.org/D5728
PTCacheEditPoint flag PEP_HIDE was not respected at all...
Reviewers: brecht
Maniphest Tasks: T69432
Differential Revision: https://developer.blender.org/D5739
They were detected as (false positive) malware with ClamAV. It's unlikely
someone would need these files, and e.g. the Debian Python package also
excludes them with a custom patch.
This patch extends Musgrave noise to operate in 1D, 2D, 3D, and 4D
space. The Color output was also removed because it was identical
to the Fac output.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5566
For operators with dynamic tooltips the tooltip calculation is
deferred until the moment it is actually shown for performance
reasons, with the tooltip field left blank for the time being.
Enum menu code shouldn't jump in and assign a tooltip either.
The menu button itself can't show a dynamic tooltip because it
does not actually call the operator, and has no reference to it.
As a side change, allow returning None from the python callback
as the most natural way to fall back to the default tooltip.
This brush lets the user pose a model simulating an armature-like deformation. The pivot point for rotation is calculated automatically based on the radius of the brush and the topology of the model.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5647
Spent again a whole day trying to understand what happens here, with no
luck. For some reasons, OperatorProperties children of unregistered
operator classes remain accessible, with their `bl_rna` member, although
that one is 100% invalid (freed memory, crashes with ASAN builds).
Funny thing is, I cannot reproduce that situation when disabling the
add-on from the py console of a Blender-with-UI.
Note: issue revealed by X3D add-on, which is still enabled in factory
settings, while not being officially supported any more, this has to be
fixed in a separate commit.
Show all memory-related byte size strings calculated with a base of 1024.
Differential Revision: https://developer.blender.org/D5714
Reviewed by Brecht Van Lommel
This adds per-platform change so Windows users will see file sizes calculated with a base of 1024.
Differential Revision: https://developer.blender.org/D5714
Reviewed by Brecht Van Lommel
The sculpt automasking feature assigns a factor to each vertex before starting the stroke. This can be used for isolating disconnected meshes, masking cavities, mesh boundary edges or creating topological falloffs.
This commit implements automasking in all brushes and topology automasking without topology falloff.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5645
Without this patch there could only be one superimposed icon
and the operators were hard coded for the button types.
This keeps the previous, sort of predefined extra icons working in a
rather generic way, but allows adding specific ones for specific case
through `UI_but_extra_operator_icon_set()`.
Reviewed by: Campbell Barton
Differential Revision: https://developer.blender.org/D5730
The mask filter operator modifies the whole paint mask. In includes multiple operations like smooth, grow or contrast accessible from a pie menu.
The dirty mask generator is similar to Dirty Vertex Colors, but it generates a paint mask. It can be used to mask cavities in the sculpt.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5496
The main switch was not checked and the function was doing all calculations, but the data was not used. This makes all slower than expected because the user had the Onion Skinning disabled, but internally was running.
The mesh filter tool applies a deformation to all vertices in the mesh at the same time. It includes multiple deformation modes and the option to lock the deformation axis.
This commit also includes the FilterCache, which is needed in some new operators and tools.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5513
Now the fade layer uses the same logic used to fade objects and also is available in all modes.
Reviewers: mendio, pepeland
Reviewed By: mendio, pepeland
Differential Revision: https://developer.blender.org/D5707
This patch implements the paper "Regularized Kelvinlets: Sculpting Brushes based on Fundamental Solutions of Elasticity" https://graphics.pixar.com/library/Kelvinlets/paper.pdf
It includes grab, biscale grab, triscale grab, scale and twist.
All deformation modes are accessible under the same tool. This helps to keep the code organized and it should not make any difference to the user when a better brush management system is implemented.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5634
Was a problem in the versioning code from rBbaaa89a0bc54, since the
TexMapping struct could already be freed and node->storage could already
be set to NULL (if a file with the new mapping node [saved from (2, 81,
8) or newer] is opened in a blender version prior to (2, 81, 8) and
saved from there again).
Reviewers: brecht
Maniphest Tasks: T69663
Differential Revision: https://developer.blender.org/D5723
This provides an API to access structs
with their members set to default values:
- DNA_struct_default_get(name)
- DNA_struct_default_alloc(name)
Currently this is only used for scene & view shading initialization,
eventually it can be used for RNA defaults and initializing
DNA struct members on file reading.
This brush is similar to the draw brush but it deforms the mesh from the original coordinates. When used with the sharper curve presets it has a much more pleasant crease/cut behavior than any of the other brushes. This is useful for creating cloth wrinkles, stylized hair or hard surface edges.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5530
Preparing for the bigger changes which will be related on passing
dependency graph to various callbacks which need it.
Differential Revision: https://developer.blender.org/D5725
Before this the timer API was relying on using a callback API to do
initialization when new file is loaded. This isn't how rest of Blender
works and it gets in a way because callbacks API is to be move to the
BKE level.
Use explicit call to timer API from where the file is loaded.
Makes the numpad + and - type of shortcuts to increase/decrease the file
number suffix work in the upper and lower bar of the file browser.
Had to add keymap handlers to the execute region for this to work.
The previous method only worked in simple cases where faces were
surrounded by non-manifold edges.
Now face regions surrounded by non-manifold edges are marked as interior.
Starting with regions most perpendicular to the surrounding geometry.
Resolves T68401
When the file browser was opened (from a temporary window since the file
browser redesign) using a button in the UI, under certain conditions
moving the mouse would trigger files to be dragged.
Note that this has been an issue before the new file browser design was
introduced, although under slightly different conditions.
Steps to reproduce:
* With factory settings, press F12
* Open a different image in the appearing Image Editor (not Render
Result)
* Make sure the window is not maximized
* Press N to open the side bar, open Image tab
* Click the folder icon there to change the image
* Change to thumbnail display type in the appearing file browser
* Cancel, click the folder icon again
Moving the mouse now would start dragging files in most cases.
The same issue could be reproduced in a similar way when installing
lights/MatCaps or HDRIs through Preferences -> Lights -> Install...
This avoids artifacts for bump mapping and diffuse BSDFs, where the bump
normal deviates far from the actual normal.
Differential Revision: https://developer.blender.org/D5399
This prints a more informative message, and is convenient when working with
local changes or in a branch where you only need to update submodules or tests.
Caused by ab823176d3.
Steps to reproduce were:
* Open Preferences
* Open file browser through Lights -> Install (doesn't matter which)
* Close browser through the window controlls
The window was freed earlier, but still referenced by new handler
context storage.
This partially reverts commit 0b2d1badec
Post increment can deep-copy for C++ iterators, while in my own checks
GCC was able to optimize this to get the same output,
better follow C++ best practice and use pre-increment for iterators.
Blender can only be run correctly from the install path since it requires Python
scripts, dynamic libraries and other files to be present. By default the install
path is the same as the build path, so it works anyway. But on the buildbot it
isn't. There was a workaround but it failed on Windows and macOS.
Now tests run from the install path. Detecting that path for ctest is more
complicated than I would like, but I couldn't find a better solution.
Ref T69541.
Bugs were: (1) needed an epsilon test in CCW test in order to
handle new costraint edge that intersects an existing point
but only within epsilon; (2) the "valid bmesh" output mode
sometimes left a face that included outside frame point.
Steps to reproduce were:
* Ensure //Render//->//Display Mode// is //New Window//
* F12
* In the opened Image Editor, Alt+S to save the image
* Save the image
The saving would fail silently.
Issue was that wm_handler_op_context() would fail to find the correct
area to activate, as the wrong window was active in context. So allow
overriding this window and do so when creating the file-select handler.
To fix this, we just scramble the halton sequence by multiplying by a large
prime number.
It seems to work fine in practice.
We also tried Sobol sequence but it has a less uniform pattern for low
number of sample.
Fix T68594 Eevee: Soft shadows causing flickering in animation and temporal AA in scenes
Since rBbaaa89a0bc54 we have to access the mapping node differently.
This doesnt take actual linkage of the new sockets into account (but
this wasnt done for most sockets on the Principled BSDF node either)
Also the min/max of the mapping node was removed entirely.
It was decided upon removing this from node_shader_utils as well (and
replace this by existing access to the Extension parameter of the
Texture node).
Part of solving T69526.
Differential Revision: https://developer.blender.org/D5693
Blender UI Layout API allows supplying parameters to operators via
button definitions. If an operator behavior strongly depends on its
parameters, it may be difficult to write a tooltip that covers all
of its operation modes. Thus it is useful to provide a way for the
operator to produce different descriptions based on the input info.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D5709
File Browser image thumbnails get just a contrasting outline and no shadow.
Differential Revision: https://developer.blender.org/D5708
Reviewed by Brecht Van Lommel
- Remove use_screen_refraction as it conflict with SSR and SSS
- Increase GTAO distance
- Add a simple lightprobe setup that works well in most cases
- Enable soft shadows
Baking the lightprobes adds some overhead to the test time (+33%).
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5507
Before, it was only possible to fade the active object. The new option allows to fade all non gpencil selected object. This is a common request by artists.
{F7719513}
Reviewers: mendio, pepeland
Reviewed By: mendio
Differential Revision: https://developer.blender.org/D5704
Instead of fixed size, `IMM_BUFFER_SIZE` is adjustable now. The internal buffer can expand if there is a need a bigger buffer. All other behaviors are still the same.
Reviewed By: fclem, #gpu_viewport
Differential Revision: https://developer.blender.org/D5570
We basically duplicate the height map branch plugged into the bump node,
and tag each node in each branch as dx/dy/ref using `branch_tag`.
Then we add a one pixel offset on the texture coordinates if the node is
tagged as dx or dy.
The dx/dy branches are plugged into (new) hidden sockets on the bump node.
This match cycles bump better but have a performance impact. Also, complex
nodetrees can now become instruction limited and not compile anymore.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5531
Popup would be closed immediately after creating, because of incorrect
mouse coordinates stored in window (popup is set to close if mouse is
some distance away from it).
Completes fix for T69581.
Replaces the large icons used in the File Browser with updated versions by Andrzej Ambroz (jendrzych).
Differential Revision: https://developer.blender.org/D5698
Reviewed by Brecht Van Lommel
The `dimensions` property of the noise nodes has been renamed to
`noise_dimensions` because it conflicted with and overwrote the
`dimensions` property of the base node.
Reviewers: brecht, JacquesLucke
Differential Revision: https://developer.blender.org/D5705
Optionally use regular expressions for the destination name,
allows re-ordering words while renaming.
Initial patch by @jmztn with error handling and UI changes.
+ Simplify code, move into own function and run once rather than on every point
+ Improved snapping when a stroke is between increments
+ Added ISO grid option for lines specified by Angle under guide settings
+ Radial snapping mode uses Angle as an offset
Differential Revision: https://developer.blender.org/D5668
This is a partial fix, in that it only brings back the banner reports in
the status bar. The popups still don't show up but I need to investigate
more.
It's really ugly that reports rely on wmWindowManager.winactive, but
that's how it is...
Partialy fixes T69581.
Parenting/constraints/delta-scaled all caused setting dimensions to fail.
Take the difference between the input scale and final scale into
account when applying the dimensions.
Allow selecting how the new location/rotation/scale is combined with
the existing transformation. This is most useful for rotation, which
has multiple options, and scale, which previously could only replace.
The failing assert was there before the recent file browser design
overhaul. Might have been in there for quite a while in fact.
Auto-creation in this case means that the file path would be created if
a non-existent path was entered in the file browser path button.
This confirmation prompt was there earlier, we removed the prompts for
creating new directories all together, but in this case it's reasonable.
Without it, it's simply too easy to create new directories by accident.
Also rename widget color blending functions more clearly.
- color_blend_v3_v3, was widget_state_blend
- color_blend_v4_v4v4, was round_box_shade_col4_r
- color_ensure_contrast_v3, was rgb_ensure_contrast
Add option to change the Intensity of the HDRI in the 3d viewport. This works for both EEVEE and Cycles
Reviewed By: brecht, fclem
Differential Revision: https://developer.blender.org/D5674
Allow combining location, rotation and scale at the same time,
using one constraint. The mixing modes are based on matrix
multiplication, but handle scale in a way that avoids creating
shear.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5640
Upon close inspection, the way the Offset mode works in the
Copy Rotation constraint makes no sense, and in fact, destroys
the rotation of its owner unless either it's single axis, or
the order is set specifically to `ZYX Euler`.
Since it can't simply be changed because of backward compatibility
concerns, replace the checkbox with a dropdown that provides a set
of new modes that actually make sense.
Specifically, add a mode that simply adds Euler components together,
and two options that use matrix multiplication in different order.
The Python use_offset property is replaced with compatibility stubs.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5640
Adds back auto-completion and auto-creation (inserting a non-existing
file-path would create it) for the file path button. The second feature
was left out knowingly, but seems there are reasonable use cases for it.
We can't add these features to the button in the Python script, we have
to call into C. So using a template to do that.
Note that this is based on the old file browser code, I've copied over
the TODO comment.
We need to ensure the file browser window doesn't manage the handlers
for itself.
The special file browser closing code that we used previously isn't
needed anymore, wm_window_open_temp() and the handling of
EVT_FILESELECT_FULL_OPEN already manage it fine.
This reverts commit 82fc9d778e.
This doesn't use the workaround from v3d_object_dimension_buts
needed for dimensions properly update.
Doing this would require moving the panel to C.
Issues from T69536 should be resolved before adding this back.
Ideally, when a reference linked ID is missing (and replaced by linking
code with an empty place-holder), we should just keep the local
overriding datablocks as-is, until broken links are fixed.
Not really working yet though, needs more work here...
Similar change to the one done for tagged IDs overriding some days ago.
We do not always want to remap all local usages of a linked data-block
to its new local overriding copy.
Remove unused OBJECT_OT_mode_set_or_submode, add
OBJECT_OT_mode_set_with_submode which can switch to edit mode as well
as a sub-mode - currently only mesh select mode is supported
(others may be added later).
It is a pain if the subfile we are checking if it exists gets
renamed/removed.
Instead we can check if the directory is empty.
Reviewers: mont29
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D5653
Part of T68836
`transform conversions.c` is a file that is getting too big (almost 10,000 lines).
So it's a good idea to split it into smaller files.
differential revision: https://developer.blender.org/D5677
When click-dragging to change values in textures (for example Musgrave-
>Size to give an example) the step size is too big.
Reviewers: brecht, lichtwerk
Reviewed By: brecht, lichtwerk
Differential Revision: https://developer.blender.org/D5661
Was always evaluating due to typo in rB34ab90f546f0.
Reviewers: brecht
Maniphest Tasks: T68840
Differential Revision: https://developer.blender.org/D5695
It is possible that POST callbacks will modify objects or relations.
This change makes it so an extra update pass is done if needed.
Reviewers: brecht
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5690
The operator set as active object material the material used in the selected stroke.
Access to the operator were added in the stroke menu and context stroke menu.
Reviewers: antoniov, pepeland
Tags: #bf_blender, #grease_pencil
Differential Revision: https://developer.blender.org/D5692
Some implementations of the standard c++ library doesn't define its
functions in the global namespace. So the `isinf` function might
fail in some systems. To fix this, we use the `ensure_finite`
function instead.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5687
Applies to "Setup Tracking Scene" operator which configures background
images for the viewport.
Solves unnecessary slowdown and higher memory usage when camera's model
does not have any effective distortion.
Differential Revision: https://developer.blender.org/D5520
setting/clearing render region uses ND_RENDER_OPTIONS notifier, but
listener was only refreshing RENDER and VIEWLAYER tabs in that case,
whereas the render region buttons are located in OUTPUT tab.
Reviewers: billreynish
Maniphest Tasks: T69522
Differential Revision: https://developer.blender.org/D5685
I believed the crash I experienced happened because:
1. The `extract_pos_nor_init` function is called.
2. Tasks are added to the task pool for `extract_pos_nor`.
3. The tasks begin to be executed while more tasks are added.
4. In some rare cases, all existing tasks are finished, but not all have been added yet.
5. This let the task-counter go down to zero.
6. This triggered a call to `extract_pos_nor_finish`.
7. Then more tasks are added and in the end `extract_pos_nor_finish` is called again.
A solution is to use a task pool that is suspended when created.
Unfortunately, there was an outdated comment, that was probably the root cause of the issue.
Reviewers: fclem, sergey
Differential Revision: https://developer.blender.org/D5680
Using the currently active movie clip had different names in the interface:
In scene context it was "Active Movie Clip", in Camera Background Images it was "Camera Clip", in Constraints it was "ActiveClip".
I made all those instances use "Active Clip", which is descriptive enough and also the shortest of the three.
Reviewed By: billreynish
Differential Revision: https://developer.blender.org/D5400
This patch rewrites the Mapping node to support dynamic inputs. The
Max and Min options have been removed. They can be added as Min and
Max Vector Math nodes manually.
Texture nodes still use the old matrix-based mapping. A new SVM node
`NODE_TEXTURE_MAPPING` has been added to preserve this functionality.
Similarly, in GLSL, a `mapping_mat4` function has been added.
Reviewers: brecht, JacquesLucke
New icons from Andrzej Ambroż (jendrzych)
- Many tweaks to existing icons, such as folders and drives for the new file browser, as well as snapping
- New icons for Checkmark, Transform Origins, Snap to Face Center, Zip Files (currently unused)
This was removed in rB0666ece2e2f9 because it is handled differently for
"real" cloth in cloth_solve_collisions(), but hair still needs this
apparently [does its thing in cloth_continuum_step() instead].
And since we have a default 'Quality Steps' setting of 5, it made many
simulations unstable.
Fixes T65038, T59742 (possibly others)
Reviewers: brecht
Maniphest Tasks: T65038, T59742
Differential Revision: https://developer.blender.org/D5681
This makes the Transform panel complete, so you don't need to open the Sidebar for such a basic concept.
Differential Revision: https://developer.blender.org/D5577
Reviewers: Brecht, Pablo Vazquez
This patch extends perlin noise to operate in 1D, 2D, 3D, and 4D
space. The noise code has also been refactored to be more readable.
The Color output and distortion patterns changed, so this patch
breaks backward compatibility. This is due to the fact that we
now use random offsets as noise seeds, as opposed to swizzling
and constants offsets.
Reviewers: brecht, JacquesLucke
Differential Revision: https://developer.blender.org/D5560
We moved this to Python too quickly, causing the following regressions:
* No auto completion for file names
* Additional handling not applied on changes, like automatic extension
appending (see file_filename_enter_handle)
* Red highlight missing when the file name already exists
Note that earlier (before the file browser redesign), this didn't use
the panel and layout code at all. So even if it's still not in Python,
at least it's integrated into regular panel management now.
OS-specific ordering of the open and cancel button is kept.
Fixes T69457.
This change implements the basics as described in {T68312} for the
shading modes.
* LookDev shading mode is renamed to Material Preview. It always uses Eevee as renderer, and is intended to provide a fast material preview suitable for texture painting, and texture and material setup.
* Rendered shading gains "Use Scene Lights" and "Use Scene World" options similar to current Material Preview. These will be enabled by default. When Use Scene World is turned off, HDRIs will be used for lighting instead. These options are available for EEVEE and Cycles.
* Renderers will be able to customize the shading settings panel and add additional settings.
Reviewed By: brecht, fclem
Differential Revision: https://developer.blender.org/D5612
As an inherent property of matrix-based transformation math, non-
uniform scaling of a parent bone induces shear into the transform
matrix of any rotated child. Such matrices cannot be cleanly
decomposed into a combination of location/rotation/scale, which
causes issues for rigging and animation tools.
Blender bones have options to exclude rotation and/or scale from the
inherited transformation, but don't have any support for removing the
often undesired shear component. That goal requires replacing simple
parenting with a combination of multiple bones and constraints. The
same is true about the goal of inheriting some scale, but completely
avoiding shear.
This patch replaces the old Inherit Scale checkbox with a enum that
supports multiple options:
* Full: inherit all effects of scale, like with enabled Inherit Scale.
* Fix Shear: removes shear from the final inherited transformation.
The cleanup math is specifically designed to preserve the main
axis of the bone, its length and total volume, and minimally
affect roll on average. It however will not prevent reappearance
of shear due to local rotation of the child or its children.
* Average: inherit uniform scale that represents the parent volume.
This is the simplest foolproof solution that will inherit some
scale without ever causing shear.
* None: completely remove scale and shear.
* None (Legacy): old disabled Inherit Scale checkbox.
This mode does not handle parent shear in any way, so the child
is likely to end up having both scale and shear. It is retained
for backward compatibility.
Since many rigging-related addons access the use_inherit_scale
property from Python, it is retained as a backward compatibility
stub that provides the old functionality.
As a side effect of reworking the code, this also fixes a matrix
multiplication order bug in the Inherit Rotation code, which caused
the parent local scale to be applied in world space. In rigger
opinion this option is useless in production rigs, so this fix
should not be a problem.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5588
Support for UV Stretching overlay during multi object editing. The
VBO now holds the ratios per fase. In the shader these ratios will
be compared against the global ratios. The global rations are created
from all selected objects.
The current implementation does not fit well with the draw module. The
plan is to move the drawing of other spaces towards the draw manager what
leads to a better fit. Currently the details on this solution is unclear
but this requirement will become an attentionpoint in the future design.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D5665
Instead use vertical cursor motion for Y axis shear.
This removes the shear_axis option completely since we now have two
axis options used by shear it's not needed.
E.g. box selecting wouldn't allow selecting the first file.
Work selection and shift/ctrl selection had similar issues.
Code assumed that the first item was the '..' parent item and manually
removed it from the selection. I could just remove this special
handling, but instead I made the behavior more dynamic. So the file list
checks if the '..' item is there and only then applies special
treatment.
That way we can easily bring the '..' item back or make it optional if
wanted.
Add missed 'Insert Blank keyframe in All Layers' to context menu
Reviewers: antoniov, pepeland
Tags: #bf_blender, #grease_pencil
Differential Revision: https://developer.blender.org/D5669
When select a layer in Dopesheet, the autolock layer was not working.
Now the Dopesheet code calls the function for autolock. Also some code cleanup to move the logic to new function.
In order to correctly drive corrective shape keys from a freely
rotating organic joint it is very often found necessary to
decompose the rotation into separate bending and twisting
motions. This type of decomposition cannot be reproduced by
any Euler order or a single quaternion.
Instead this is done by using a helper bone with a Damped Track
constraint aimed at the tail of the control to pick up the bending,
and its helper child with Copy Transforms to separate the twist.
Requiring two additional bones to drive a shape key or a correction
bone seems inconvenient, so this implements the necessary math as new
options in the recently introduced Rotation Mode dropdown of the
Transform Channel driver variable type. The data is also accessible
as a Transformation constraint input.
The output is in the form of Quaternion-derived 'pseudo-angles',
which for `Swing and Y Twist` would represent the following:
* W: true bend angle, independent of bend direction.
* Y: true twist angle.
* X, Z: pseudo-angles representing the proportion of bending around X/Z.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5651
This is a general redesign of the File Browser GUI and interaction
methods. For screenshots, check patch D5601.
Main changes in short:
* File Browser as floating window
* New layout of regions
* Popovers for view and filter options
* Vertical list view with interactive column header
* New and updated icons
* Keymap consistency fixes
* Many tweaks and fixes to the drawing of views
----
General:
* The file browser now opens as temporary floating window. It closes on
Esc. The header is hidden then.
* When the file browser is opened as regular editor, the header remains
visible.
* All file browser regions are now defined in Python (the button
layout).
* Adjusted related operator UI names.
Keymap:
Keymap is now consistent with other list-based views in Blender, such as
the Outliner.
* Left click to select, double-click to open
* Right-click context menus
* Shift-click to fill selection
* Ctrl-click to extend selection
Operator options:
These previously overlapped with the source list, which caused numerous
issues with resizing and presenting many settings in a small panel area.
It was also generally inconsistent with Blender.
* Moved to new sidebar, which can easily be shown or hidden using a
prominent Options toggle.
* IO operators have new layouts to match this new sidebar, using
sub-panels. This will have to be committed separately (Add-on
repository).
* If operators want to show the options by default, they have the option
to do so (see `WM_FILESEL_SHOW_PROPS`, `hide_props_region`), otherwise
they are hidden by default.
General Layout:
The layout has been changed to be simpler, more standard, and fits
better in with Blender 2.8.
* More conventional layout (file path at top, file name at the bottom,
execute/cancel buttons in bottom right).
* Use of popovers to group controls, and allow for more descriptive
naming.
* Search box is always live now, just like Outliner.
Views:
* Date Modified column combines both date and time, also uses user
friendly strings for recent dates (i.e. "Yesterday", "Today").
* Details columns (file size, modification date/time) are now toggleable
for all display types, they are not hardcoded per display type.
* File sizes now show as B, KB, MB, ... rather than B, KiB, MiB, … They
are now also calculated using base 10 of course.
* Option to sort in inverse order.
Vertical List View:
* This view now used a much simpler single vertical list with columns
for information.
* Users can click on the headers of these columns to order by that
category, and click again to reverse the ordering.
Icons:
* Updated icons by Jendrzych, with better centering.
* Files and folders have new icons in Icon view.
* Both files and folders have reworked superimposed icons that show
users the file/folder type.
* 3D file documents correctly use the 3d file icon, which was unused
previously.
* Workspaces now show their icon on Link/Append - also when listed in
the Outliner.
Minor Python-API breakage:
* `bpy.types.FileSelectParams.display_type`: `LIST_SHORT` and
`LIST_LONG` are replaced by `LIST_VERTICAL` and `LIST_HORIZONTAL`.
Removes the feature where directories would automatically be created if
they are entered into the file path text button, but don't exist. We
were not sure if users use it enough to keep it. We can definitely bring
it back.
----
//Combined effort by @billreynish, @harley, @jendrzych, my university
colleague Brian Meisenheimer and myself.//
Differential Revision: https://developer.blender.org/D5601
Reviewers: Brecht, Bastien
In weightpaint it is possible to enable the bone selection mode. During
drawing the overlay was rendered, but during selection this was ignored.
Users needed to double click in order to select bones even when the overlay
was enabled.
This patch makes bone selection possible during weight painting using the pose mode bone
selection overlay with a single click.
Reviewed By: fclem, campbellbarton
Differential Revision: https://developer.blender.org/D5629
* Auto detect rc and release version cycle in BKE_blender_version.h.
* On Windows, generate zip and installer if a release is detected.
* On macOS, always generate a dmg instead of zip.
* Use standard package names without hash if a release is detected.
* Buildbot package names now match platform names in releases.
Ref T67056
Differential Revision: https://developer.blender.org/D5643
Useful for using reference images that only make sense to see
in aligned axis-views.
This restores functionality possible with 2.7x background images.
See: T52668.
We can now generate a proper path here, make use of it.
Note: not sure how property pyrna path is supposed to be accessed? code is
similar to the struct pyrna path anyway...
Main issue was that `rna_prepend_real_ID_path()` would return
nothing in case given path was NULL, when it should actually return the
`prefix` computed by `RNA_find_real_ID_and_path()` in that case...
Also make return `real_id` pointer optionnal, no reasons to make it
mandatory here. And some general naming fixes.
Now that we 'properly' support private ID data in lib management, there
is no reason anymore to have that custom func, badly named and
by-passing the whole generic ID management code.
Not sure exactly why that was working with nodetrees in depsgraph (could be some special
code in the despgraph), but we always want to allocate memory for the nodetrees here!
Same issue here as with root nodetrees, those are private ID data owned
by another ID, and not in Main DB. This requires special handling.
there are still quiet a few things to do here, like getting rid of
special code for master collection (regular ID copying should handle
that just as it already does for root nodetrees), cleanup in ID copying
code, etc.
The Poly curves were not supported when convert curves to grease pencil strokes, but now are supported.
Also, some code cleanup to make it more readable.
While the vast majority of labels would never get a button context menu
(as opposed to the regular context menu of this region), draggable
labels would still reach code for such context menu creation. From what
I can tell only file browser icons/thumbnails and the properties editor
data path would be affected. The button context menu doesn't make sense
for them, so let the region context menu show up instead.
If at some point we want button context menus for specific labels, we
can make checks more granular.
This new option applies the opacity using the strength of the stroke instead to use the alpha channel of the material.
Tested in greasepencil-object branch
{F7712796}
The vertex group filter has been removed because this filter is not logic in Material mode and must be valid only in Strength mode.
{F7713147}
Reviewers: pepeland, mendio
Reviewed By: mendio
Differential Revision: https://developer.blender.org/D5650
Now the material is set as fill if the curve is 2D and is filled with a material. This is done in the Convert operator only, because the SVG add-on works totally different due the SVG has more parameters to determine the type of filling.
Buttons marked as the default action are shown in full selected color. Simplification of all the related active_default code.
Differential Revision: https://developer.blender.org/D5574
Reviewed by Campbell Barton
For reasons similar to drivers, it should be possible to set an
explicit Euler rotation order in constraints that use Euler angles.
The Transform constraint in a way approaches drivers in its use,
in that it effectively alters channels using values of other
channels after applying a fixed form mathematical expression.
For this reason, instead of just specifying the euler order for
its inputs, it uses the same enum as driver variables. However
Quaternion components are converted to a weighted pseudo-angle
representation as the rest of the constraint UI expects angles.
This commit adds support to convert curves to Grease Pencil strokes and create the materials too.
Also, there is a new python API. This API is required by the modified SVG import addon to create strokes( see T67065).
All curves selected in one operation are converted in the same Grease Pencil object.
The meaning of the euler angles completely depends on the rotation
order. Currently the rotation order is taken from the target of the
driver variable, which somewhat makes sense if it uses euler, but if
it's quaternion, then the order is always set to XYZ.
Add a new option for the rotation channels of the Transform Channel
driver variables that defaults to the old behavior, but allows setting
an explicit rotation order.
Depending on the outliner display mode and the outliner dirty state,
a sync may not be needed on each draw. This commit adds a check
before syncing to prevent syncing when not needed.
This changes from-outliner selection syncing to always sync the
selection state of objects. This allows selecting objects while in
edit mode for parenting or adding hooks. This also fixes a few issues
where the sync algorithm would fail when no active object existed.
This is meant to replace the individual build steps for the various libraries
and submodules, so we can easily get the correct revisions associated with
different branches and releases.
This patch continue the efforts to split the `gpu_shader_material` file
started in D5569.
Dependency resolution is now recursive. Each shading node gets its own
file. Additionally, some utility files are added to be shared between
files, like `math_util`, `color_util`, and `hash`. Some files are always
included because they may be used in the execution function, like
`world_normals`.
Some glsl functions appeared to be unused, so they were removed, like
`output_node`, `bits_to_01`, and `exp_blender`. Other functions have
been renamed to be more general and get used as utils, like `texco_norm`
which became `vector_normalize`.
A lot of the opengl tests fails, but those same tests also fail in
master, so this is probably unrelated to this patch.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5616
Collection contents alphabetical sort now uses a Natural Sort that takes number magnitude into account.
Differential Revision: https://developer.blender.org/D5636
Reviewed by Brecht Van Lommel
This commit includes the new brush cursor, active vertex updates and the normal radius brush property for all sculpt brushes.
-The new brush cursor previews the real stroke radius over the mesh and the sampled sculpt normal.
-The active vertex is used in sculpt tools and brushes as a starting point for an operation, similar to a preselection. It is also mirrored following the enabled symmetry options to preview the stroke symmetry.
-The normal radius brush property limits the radius that is going to be used to sample the sculpt normal and area center. It controls how closely the cursor follows the surface and it improves the behavior of most brushes, making them suitable for hard surface sculpting.
Reviewed By: campbellbarton, brecht
Differential Revision: https://developer.blender.org/D3594
Previously this was done in the deps builder due to the fact we needed
both 32 and 64 bit versions of this dll and CMAKE does not support that
in a single build folder. Now that 32 bit support has been dropped, this
can be safely moved into the codebase.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5633
Calculating UV Stretching on large meshes showed garbage. The reason
is that the calculation is not thread save. Temporarily disable
threading for UV Stretching
Removes the colon separating label and number inside some number fields.
Differential Revision: https://developer.blender.org/D5628
Reviewed by Brecht Van Lommel
When a material slot is empty, the default material is used.
The default color used is Gray to get a good contrast in dense scenes with dark and white background.
Reviewers: brecht, dfelinto, mendio, pepeland
Differential Revision: https://developer.blender.org/D5625
unique name
This was leading to equally named particle systems, causing problems
later on.
Spotted while looking into T67958.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5632
OpenCL Parallel compilation only works inside Blender. When using cycles in a different setup (standaline or other software) it failed compiling kernels as they don't have the appropriate Python API and command line arguments.
This change introduces a `running_inside_blender` debug flag, that triggers out of process compilation of the kernels. Compilation still happens in subthread that enabled the preview kernels and compilation of the kernels during BVH building
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5439
As the operator was designed to use only as popup, when it was used as menu option, the popup was displayed again.
Reviewers: mendio, pepeland
Differential Revision: https://developer.blender.org/D5630
some cases
Since rB78b56fa7d973 defining a button with 'but->a1 = 0' wasnt
automatically setting its step value to 1 in 'ui_do_but_NUM' anymore.
Instead of handling this more forgiving in 'ui_do_but_NUM', went over
the remaining cases of buttons and and defined them with a step value of
1.
Fixes T69305
Reviewed By: brecht
Maniphest Tasks: T69305
Differential Revision: https://developer.blender.org/D5631
Now, when clicking in the keys area, the layer is synchronized, not only in the left area with the names. This is one of the most requested feature by artists.
Also, removed some old comments.
Reviewers: brecht, angavrilov
Reviewed By: brecht
Subscribers: pepeland, mendio
Differential Revision: https://developer.blender.org/D5627
- Added 'Hide Inactive Layers' operator and reordered 'Show/Hide' menu items
- Move 'New Layer' to bottom in 'Move to Layer' operator for consistency.
- Removed extra end points in some menu items (...)
Reviewers: antoniov, billreynish
Tags: #bf_blender, #grease_pencil
Differential Revision: https://developer.blender.org/D5626
Building deps on some systems will install to opt/lib/library/lib64
directories rather than opt/lib/library/lib. This adds additional
lib64 paths for ldconfig to ensure the libraries are found at
runtime.
* `make_override_library_exec` was not properly cleaning `LIB_TAG_DOIT`
from all IDs in the Main DB.
* `BKE_override_library_create_from_tag` was doing dangerous things
(like iterating over a BMain listbase while adding items to it...).
* It would remap *all* local usages of overridden linked IDs to new
overriding local IDs, which was very inconvinient.
New handling of remapping now allows to only remap inside of the group
of IDs that is being overridden, in other words you can still have e.g.
other empties still instancing the same linked collection...
Uniform scale is superior to non-uniform scale in that it works with
parenting without causing shear. Thus it is a valid desire in some
cases to turn arbitrary scale into guaranteed uniform scale.
Implementing this in the Copy Scale constraint allows one for instance
to 'inherit scale as uniform' by disabling Inherit Scale, and using
Copy Scale from parent with Offset and Make Uniform.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5614
Actual issue is with triangle beautify,
avoid precision error by scaling the epsilon
by the face area when it's over 1
The mesh in the report was very large (approx 2000 on each side),
causing precision issues with a fixed epsilon.
Now, when it's selected the stroke select mode, the points are not displayed and the stroke is fully selected automatically extending the selection.
Differential Revision: https://developer.blender.org/D5622
Animation menu updates for Edit Mode and Draw Mode (header and context menu):
- Rename menu items for a better understanding of what the operators really do.
- Change shortcuts (legacy from the old Grease pencil)
{F7708018}
Reviewers: antoniov, pepeland, billreynish
Tags: #bf_blender, #grease_pencil
Differential Revision: https://developer.blender.org/D5617
NodeTree structures of materials and some other data blocks are
effectively node group datablock objects that are contained inside
the parent block. Thus, direct references to them are only valid
while blender is running, and are lost on save.
Fix Copy As New Driver to create a reference that goes through
the owner datablock, by adding a new ID flag to mark private
pseudo-datablocks.
Also fix functions that return full paths to structures and
properties, e.g. used in python tooltips. Functions for paths
from ID to struct or property can't be changed because of
Animation Data related code.
Reviewers: mont29
Differential Revision: https://developer.blender.org/D5559
According to the documentation this flag is only supported
by C and Objective-C languages:
https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html
Solves noisy output on every C++ file in the project when
using latest GCC-9.
This patch stitches the vertices along patch edges so that cracks can
no longer form when applying subdivision or displacement a mesh.
Subpatches are now formed in a way that ensures vertex indices along
subpatch edges are equal for adjacent subpatches. A mapping of vertices
along patch edges is built to preform stitching. Overall performance is
roughly the same, some gains were made in splitting, but some was lost
in stitching.
This fixes:
- T49049 (cracks between patches from material and uv seams)
- T49048 (discontinuous normals with true displacement)
Reviewers: sergey, brecht
Differential Revision: https://developer.blender.org/D3692
Object not referenced in any scene would not be deletable with previous
code... that was fine in 2.7x since it was not supposed to happen, but
now we can just use the nuclear `BKE_id_delete` for objects as well,
will take care of properly unlinking everything as needed.
Allow area joining even if the areas are not quite perfectly aligned.
Differential Revision: https://developer.blender.org/D5595
Reviewed by Brecht Van Lommel
Scale Graph Editor keyframe dots and handles based on Resolution Scale rather than Line Width.
Differential Revision: https://developer.blender.org/D5600
Reviewed by Brecht Van Lommel
Hook modifier uses same kind of parent inverse matrix as regular object
parenting, so we need to bypass that matrix re-computation when setting
the overridding object here as well.
Also cleanup some minor glitches in object parents' override_apply func.
This commit changes the functionality of the Poly build tool to make it more suitable for retopology tasks:
- Click and drag from a boundary edge extrudes a new quad
- Click and drag on vertices tweaks the position
- Ctrl + click adds geometry. There is a geometry preview in the gizmo. It also can automatically convert triangles to quads.
- Shift + click deletes mesh elements (faces or vertices)
- Updated preselection code. Different mesh elements take priority depending on the selected action.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D5573
The evaluated data must not copy the material if it's NULL.
Still the stroke exists in the file, so maybe need some thinking in how resolve this, but anyway this is a different topic not related to bug.
- Rename menu 'Stroke' to 'Draw': the menu includes not only strokes related things and the name follows the usage in other paint modes in Blender.
- Remove duplicate animation operators.
- Menu updates to include clean up and layers operators that don't need previous selection.
{F7705120}
Reviewers: antoniov, pepeland, billreynish
Tags: #bf_blender, #grease_pencil
Differential Revision: https://developer.blender.org/D5599
New brush option to calculate the distance to generate a new brush step using the cursor position over the mesh instead of the screen coordinates. This avoids artifacts when sculpting across curved surfaces.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5432
Since OpenImageDenoise requires a CPU with SSE 4.1 or newer,
let the node act as passthrough on unsupported CPUs and display
a message in the node itself.
Running multiple instances of OIDN simultaneously can use dozens
of GBs of memory. Since OIDN is multithreaded internally, we can run
only one instance at a time and should not lose much performance.
Fixing T69006
With Blender 2.80 we introduced a more flexible matcap system. One
change we did was to multiply the matcap with the base color that was
shaded. As matcaps contains diffuse and specular lighting in a single
texture this lead to rendering artifacts. Artists were complaining that
everything looked to metalic.
We now support a separate `diffuse` and `specular` pass for matcaps.
`shaded_color = diffuse_light * base_color + specular_light`
For matcaps to support this feature they need to be multilayer openexr
files with 2 renderpasses (named `diffuse` and `specular`). In the future
we can change this to first pass/second pass in stead of this naming
convention.
Reviewed By: fclem, brecht
Differential Revision: https://developer.blender.org/D5335
Show Edges option in the UV editor does not do anything. Only RNA/DNA
code could be found, so it is save to be removed.
Differential Revision: https://developer.blender.org/D5446
Now all wire edges linked to the merged vertex are used for split faces.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D5603
Improved error handling of Join Area operator in cased it is passed cursor position that is not valid.
Differential Revision: https://developer.blender.org/D5598
Reviewed by Brecht Van Lommel
Following the changes in the Edit Mode menus on the header, this patch split the current context menus into Point and Stroke and also rearrange the operators.
{F7704949}
Reviewers: antoniov, pepeland, billreynish
Reviewed By: billreynish
Tags: #bf_blender, #grease_pencil
Differential Revision: https://developer.blender.org/D5596
Compiling this big file for every Eevee material is bad for performance, and
now that we are adding more nodes it gets worse. This patch adds a simple
mechanism to split up that file, and use only the parts used by shader nodes.
When a function is used by GPU_link, we detect which GLSL file it came from
and use it in GLSL code generation automatically. Dependencies between GLSL
files are manually specified, and function names must be unique across all
GLSL files.
Most of the actual splitting up will be done in later commits.
Differential Revision: https://developer.blender.org/D5569
This will be used by Optix to help the compiler figure out scoping. It is not
used by other devices currently, but worth testing if it helps there too.
Ref D5363
Issue was exposed by recent own rB03bf84db86b commit, but was actually
present in RNA API for PointCaches since (probably) ages: whole accessor
code here was assuming that owner ID was an Object, when it is actually
a scene for RigidBody simulations...
Had also to make `BKE_ptcache_id_find()` and friends a bit more
flexible, now they also accept a NULL object pointer parameter...
Before there were two options: Paste to original layer called "Paste" and Paste to active layer called "Paste & Merge"
Now, by default the paste is in active layer and the "Paste & Merge" has been renamed "Paste".
For old "Paste", now is called "Paste by Layer" and it's not the default value anymore.
Note: Minor edits to add icons not present in Differential revision.
Differential Revision: https://developer.blender.org/D5591
The correct fix would be to avoid all those hacks but this is needed if
we want to be able to parallelize object vbo extractions.
This is the fixed version of the hack. The issue was that the ibo ranges
were saved before the batch were reset and the IBO was discarded, leading
to a read after free error. All previous reported crash were tested and
are now not reproductible.
x64 builds with WITH_CYCLES_OPTIMIZED_KERNEL_SSE2 not defined
since SSE2 is the lower bar for x64 cpus. Turning the architecture
logging related if into the last if in the architecture detection
chain, which will never execute unless you turn off all kernels
in de debug flags.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5579
The specifc bug here came fro; some IDProperties ID pointer storing
references to workspaces.
But that was actually a main loophole in that 'unndoing data while
keeping same UI' process, as we never know who might store a pointer to
one of those datablocks that we want to keep the 'old' version off.
It might actually be ever more needed when we start undoing (changing)
only the IDs actually modified in an undo step...
Notes:
* While not ideal, I think we can afford an extra looping over the whole
Main DB here... Remapping process in itself is fairly cheap, thanks to
the hashes.
* This commit is considered rather risky (especially thanks to 'private'
IDs), think it should work fine for now, unless some IDPointers start
storing references to private IDs...
Once D5559 is in, we shall do another pass here, probably also forbids
assigning private IDs to IDProperties, etc.
Use a single loop to iterate over all lights, reducing divergence and amount
of code to generate. Moving ray intersection calls out of conditionals will
also help the Optix compiler.
Ref D5363
This file used to be stored in the Add-ons repository
to allow easy commit access for updating.
Since then, we have created an automated process,
the script can now easily be updated by anyone.
This also makes more logical sense to store the file here
as it is not an add-on.
Dims the text and background of disabled menu items while mouse is hovering.
Differential Revision: https://developer.blender.org/D5575
Reviewed by William Reynish
As part of T66294 is needed to use the evaluated data for Sculpt brushes to make possible to Sculpt a transformed stroke.
Without this commit, it was impossible sculpt the stroke if the modifier moves away the stroke point from original position. Also, some calculation is done in order to determine the rotation to transform the brush effect too.
- All parts of the code that need tessface should calculate it on demand.
- The check for tessloopnormal mask isn't correct
(since this is loop data, not tessface data).
Now the selection is using the position after evaluating the modifiers and makes possible to select a stroke point that has been moved from the original location.
Related to T66294
Patch by Peter Fog (tintwotin).
Differential Revision: https://developer.blender.org/D5567
Reviewers: Brecht Van Lommel (brecht), William Reynish (billreynish)
Before, the evaluation of modifers were done in draw manager. The reason of the old design was grease pencil was designed before depsgraph was in place.
This commit moves this logic to depsgraph to follow general design and reduce Draw Manager complexity. Also, this is required in order to use modifiers in Edit modes.
Really, there is nothing really new in the creation of derived data, only the logic has been moved to depsgraph, but the main logic is the same. In order to get a reference to the original stroke and points, a pointer is added to Runtime data as part of the evaluated data. These pointers allow to know and use the original data.
As the modifiers now are evaluated in Depsgraph, the evaluated stroke is usable in Edit modes, so now it's possible to work with the evaluated version instead to use a "ghost" of the final image over the original geometry as work today.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5470
Since pependicular snap depends on `snapTarget` it is important to indicate where this target is so as not to confuse users.
So draw a pivot where the target is and a dotted line toward the perpendicular snap point.
Reviewers: campbellbarton, brecht, billreynish
Differential Revision: https://developer.blender.org/D5557
The set origin was not working from python because the operator was checking if the stroke was valid in the console area.
As the stroke only can be valid for GP obects, this check is not needed.
In case the property is a RNA pointer, `RNA_path_resolve()` will try to
resolve it and return that pointer, instead of returning expected
container... That is a bad inconsistency in the rNA path API, but no
proper way to solve it for now...
This is a continuation of rB39f005eae8eed8b939579aff8c9a05a4f50e5e38
Now all the fields where we check for object type in RNA (like
rna_Curve_object_poll) will have a safe guard for when this isn't the
case. For example when loading files that has missing object libraries
and all missing objects are replaced with empties (placeholders).
Reviewed By: Brecht
Differential Revision: http://developer.blender.org/D5425
The old layout of `PointerRNA` was confusing for historic reasons:
```
typedef struct PointerRNA {
struct {
void *data;
} id;
struct StructRNA *type;
void *data;
} PointerRNA;
```
This patch updates it to:
```
typedef struct PointerRNA {
struct ID *owner_id;
struct StructRNA *type;
void *data;
} PointerRNA;
```
Throughout the code base `id.data` was replaced with `owner_id`.
Furthermore, many explicit pointer type casts were added which
were implicit before. Some type casts to `ID *` were removed.
Reviewers: brecht, campbellbarton
Differential Revision: https://developer.blender.org/D5558
Keep ED_armature_transform for RNA Armature.transform
since it operates on edit-bones in edit-mode.
Rename ED_armature_transform_bones to ED_armature_edit_transform
since it wasn't obviously an edit-mode function.
Adds a new icon for the action constraint so the icon draws with the
constraints color. Also adds two new icons for sequencer meta strips
and duplicate strips for use in the outliner sequence display mode.
The meta strip icon could be used in the sequencer sidebar.
Adds more options to the context menu that pops up on area edges. Both Split types, Join, and Swap.
Differential Revision: https://developer.blender.org/D5459
Reviewed by Brecht Van Lommel
This change switches the debug symbol format from /Zi to /ZI for
debug builds of blender, allowing Edit and Continue to work.
This allows limited [1] code changes in the debugger without
having to stop the process and recompile a new binary leading
to improved developer productivity.
All MSVC versions we support support this flag, Clang on
windows does not mind the /ZI flag, but doesn't currently
emit the required information to have this feature work.
[1] https://docs.microsoft.com/en-us/visualstudio/debugger/supported-code-changes-cpp
This option was doing nothing in Blender 2.80.
I don't really see a reason for keeping it around.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D5552
This reverts commits 54fd8176d7, 4c5becb6b1 and 8f578150e.
Those kind of commits must be reviewed and approved by project owners.
That one:
* Broke Collada building by not properly updating all calls to modified
function.
* Broke *whole* ID management by not properly updating library_query.c.
And in general, I am strongly against backward ID pointers, those are
*always* a serious PITA for ID management. Sometimes they cannot be
avoided, but in general other ways to get that kind of info should be
investigated first.
This was working from Alt+N menu but was passing wrong ARegion
(alongside wrong mouse coords) to ED_view3d_win_to_3d_int when called
from the header menu.
Operator context INVOKE_REGION_WIN takes care of this.
This also fixes wrong behavior of 'Mesh > Normals > Rotate' when called
from the header menu.
part of T69019
Reviewers: billreynish, mont29
Maniphest Tasks: T69019
Differential Revision: https://developer.blender.org/D5555
That file was getting out of control, now comparison/override RNA code is
in `rna_access_compare_override.c`. 1K lines of code for now, but that
area is likely to grow more in the future...
Note that we can probably split more out of `rna_access.c`, but for now
that will do.
NodeTree structures of materials and some other data blocks are
effectively node group data block objects that are contained inside
the parent block. Thus, direct references to them are only valid
while blender is running, and are lost on save.
Fix Copy As New Driver to create a reference that goes through
the owner data block, by adding a new runtime field to bNodeTree.
We try to avoid diffing too much things during edition, but when saving
a file we need to check all possible overridable IDs to ensure we have
all needed override operations...
Was pretty sure that was already in code, but apparently not (or it got
lost at some point...).
The object color property is added as an additional output in
the Object Info node.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5554
The fract function in OpenCL does more than just return the fraction.
It also writes the floor to the second argument. Which wasn't put
in consideration.
Instead, we use a simple `a - floor(a)` like the Math node.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5553
We cannot use local/reference here, that is very confusing, since at
that stage current local is kind of src of data for the future local ID,
that is currently a mere copy of the linked data... ;)
So we are much better with src/dst names here.
Previously there was already "draw_shape" property,
but it was doing nothing. This commit renames the
property to "display_shape". Furthermore, different
shapes like SQUARE and DIAMOND are supported now.
Currently, the shapes are drawn using the shader that also
draws keyframes. In the future we might want to separate
this.
The new shapes are not used anywhere yet, but they can
be used by addon developers and will probably be useful
when we want to support different kinds node systems later.
For example, different shapes can be used to distinguish
between data and control flow.
Differential Revision: https://developer.blender.org/D2829
The Volume Info node provides the Color, Desnity, Flame, and Temperature
of smoke domains.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5551
The White Noise node hashes the input and returns a random number in the
range [0, 1]. The input can be a 1D, 2D, 3D, or a 4D vector.
Reviewers: brecht, JacquesLucke
Differential Revision: https://developer.blender.org/D5550
Add Multiply, Divide, Project, Reflect, Distance, Length, Scale, Snap,
Floor, Ceil, Modulo, Fraction, Absolute, Minimum, and Maximum operators
to the Vector Math node. The Value output has been removed from operators
whose output is a vector, and the other way around. All of those removals
has been handled properly in versioning code.
The patch doesn't include tests for the new operators. Tests will be added
in a later patch.
Reviewers: brecht, JacquesLucke
Differential Revision: https://developer.blender.org/D5523
Previously eigens internal include order somehow implicitly provided
M_PI and friends. The recent eigen version bump broke this implicit
behaviour, better to be explicit that we need the math defines for MSVC.
This is due a limitation in the RNA property when the range is too extreme. As we don't need that, the value was set to SHRT_MAX frames as maximum offset.
Also fixed the same problem in other modules of Grease Pencil.
This hack would make operator (push down) buttons without icons align
their text to the left in toolbars. Everywhere else in Blender, we
center it by default.
We barely use operator buttons in toolbars anymore. Even if we do and
there's a good reason to make text left aligned, it's better to use
`uiLayout.alignment = 'LEFT'` to achieve the same effect, but without
lowish-level hacks for a specific region type.
Differential Revision: https://developer.blender.org/D5527
This commit adds a new filter by material using the name and not only the index.
Reviewers: antoniov, pepeland
Differential Revision: https://developer.blender.org/D5544
Part of T66420
Option for snapping to the nearest point of a reference coordinate.
The patch also adds Edge Center and Perpendicular snaps to the ruler.
{F7675906}
Reviewers: campbellbarton, brecht
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D5543
The recent commit of synced selection added an active color theme to
the outliner, and synced selection enabled by default. The subversion
bump was missed.
The clamp option is implemented using graph expansion, where a Clamp node
named "clamp" is added and connected to the output. So the final result
is actually from the node "clamp".
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5540
This adds a url-preset operator to simplify opening re-usable links.
- Standard websites have their own tool-tip.
- De-duplicate logic to get URL's that include version information.
- Reporting bugs no longer needs to have all information
included in the URL.
D5498 by @luisbg with edits.
The original code was commented on.
Unlike blender 2.79, the grid units are now displayed only when RV3D_VIEW_IS_AXIS.
The visible subdivisions in the grid are made by the GPU and depending on the pixel.
The code used here only mimics this behavior and adds a bit of overhead.
Reviewers: fclem, campbellbarton
Subscribers: FloridaJo, zlsa, rl.amorato, EitanSomething
Differential Revision: https://developer.blender.org/D4325
When calling `MEM_guarded_mallocN_aligned` with an alignment of 4,
a pointer that was returned that is 4 byte but not 8 byte aligned.
When freeing this pointer, `MEM_guarded_freeN` thinks that it is an
illegal pointer, because it asserts that `((intptr_t)memh) & 0x7 == 0`.
The fix is to always use at least 8 byte alignment.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5529
This change was applied to GP branch during the period 2.80 cannot be updated. Now the patch can be moved to master.
The commit fix the problem when reproject over surface in multiframe mode and the surfaces can moved.
Also improved the surface algorithm thanks to Lukas W (@geloescht).
New Algorithm: Differential Revision: https://developer.blender.org/D4878
Tested by @mendio and @pepeland
Actually, the value for this parameter must be in the order of 0.00001 and this makes the UI uncomfortable.
Now, the value is divided by 1000 internally and the UI values are more logic.
Reviewers: mendio, pepeland
Differential Revision: https://developer.blender.org/D5528
The pointer argument is supposed to be the object the property belongs
to, not a pointer to the property metadata itself. This only worked
before because the argument was never used.
This is a step to finish the D4325 and fix the T61286.
Currently the grid is highlighted in steps of 10 out of 10, which is wrong for the imperial units as seen in `buImperialLenDef`.
The idea of the code is to pass the steps of the grid already dimensioned as a uniform.
Another important thing to note is that subdivisions now only affect the grid without unity.
This matches the 2.7x Blender versions.
No performance loss (almost no gain too).
Reviewers: fclem
Subscribers: zlsa, rl.amorato
Differential Revision: https://developer.blender.org/D4379
This was due to the GPUIndexBuf ranges only computed when requesting
the triangles indices. If the tris were already calculated, the new shading
batches would never have the GPUIndexBuf ranges and instead use the full
triangle index buffer.
So since this only happen when shading data does not match, we just save
the previous GPUIndexBuf ranges and reuse them for the new batch.
This patch is a bit of a hack on top of a hack but it works fine.
Editing a lib char should never, ever be done once you have proxies of
it in your project, that will most certainly break a lot of things...
But at leats let's try no to crash here.
This operator only existed to be able to see multiple reports, now instead the
info log can be opened and contents can be copy/pasted.
Patch by Valentin (Poulpator)
Differential Revision: https://developer.blender.org/D5510
object
This showed e.g. when deleting active object, then selecting using box
select.
This commit also lifts the restriction that linked objects could not be
moved to a collection.
Reviewers: campbellbarton, dfelinto
Maniphest Tasks: T68647
Differential Revision: https://developer.blender.org/D5485
need to access curve_cache from evaluated object.
thx @sergey for pointing that out.
Reviewers: sergey
Maniphest Tasks: T68779
Differential Revision: https://developer.blender.org/D5526
When working with Effect strips it is not optimal to have to scroll
downwards to get to the important settings for these kinds of strips.
D5512 by @tintwotin
Think pretty much any ID pointer property should be overrideable
actually, without this reconstructing a local hierarchy of overriding
data-blocks simply cannot work properly...
Fix T67008: Missing move handle and flickering in FileBrowser
Allow split regions (child regions) to contribute to the action zones (azone) of the parent region.
This fixes the issues in file browser and also in the user preferences.
Reviewers: Severin, mont29, campbellbarton
Reviewed By: Severin, mont29, campbellbarton
Subscribers: brecht, campbellbarton
Maniphest Tasks: T67008
Differential Revision: https://developer.blender.org/D5273
- Implement dynamic inputs. The second input is now unavailable in single
operand math operators.
- Reimplemenet the clamp option using graph expansion for Cycles.
- Clean up code and unify naming between Blender and Cycles.
- Remove unused code.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5481
Adds support for changes in the outliner from the soc-2019-outliner
branch. All changes made in the default keymap are made in the
Industry Compatible keymap, except for renaming. Renaming is done
with Return in the Industry Compatible keymap.
Move outliner versioning for syncing and themes to the block
for the next subversion bump. It was not moved from the first
location it was placed in the soc-2019-outliner branch.
Old files will now load with synced selection enabled reliably.
Actually, the selection mode is not visible in Sculpt mode when mask is enabled, but still is used.
Also, the mode is shared between Edit mode and Sculpt mode and for meshes the selector is by mode.
This commit splits the select mode in different properties and show the selector in Sculpt mode to define the Select mode. Also, the Select Mask button has been removed and now the Select Mode buttons work equal to Meshes where the select buttons are the mask enable too.
Fixed some old code not valid detected during these changes.
Differential Revision: https://developer.blender.org/D5500
Now the GPencil smooth algorithm uses a average value instead to use only two points and the interpolated value.
Differential Revision: https://developer.blender.org/D5489
Prior to this commit: If the Grease Pencil Thickness modifier is set to Normalize and a Vertex Group is selected, the thickness of all strokes are effected when changing the Thickness parameter. Points on strokes are only normalised (= pressure set to 1.0) if they are part of the Vertex Group; the strokes themselves may still change thickness.
With this patch: If Normalize is selected with a Vertex Group, Blender now pre-checks each stroke to determine whether it has vertices within or outside the Vertex Group. If all the points on the stroke belong to the Vertex Group, it normalises the whole stroke to a uniform thickness. If some or none of the points of the stroke belong to the Vertex Group, the stroke is now left as is.
Reviewed By: @antoniov
Differential Revision: https://developer.blender.org/D5483 with minor edit.
Set and clear parents for all elements in the selection in the outliner.
This also removes the popup menu for setting the parent to curves,
armatures, and lattices. It makes more sense to keep the outliner
simple and only do object parenting.
Adjusts the scrolling of show active and scroll page operators
to use the `outliner_scroll_view` operator to ensure scrolling
does not leave the outliner bounds.
Also changes show active to expand subtrees containing all
instances of the active object, which may be linked to multiple
collections.
Draw icons for sequencer and vertex groups. The sequence
types need updates because they all draw in various colors
and some sequence types do not have an icon.
Previously with F2 mapped to the global rename active object
operator, it was not posible to use the conventional F2 to rename any
outliner element like collections or object data. This adds F2 to the
outliner keymap to call the outliner rename operator rather than the
popup rename object operator.
Adds a keyboard walk navigation and selection operator to the
outliner. Up and down arrow keys walk up and down the list of
elements, and left and right will open and close elements if
the elements are closed or opened respectively. Holding shift
while walking up and down the tree expands the selection.
Holding shift while clicking or pressing left and right arrows
will expand or collapse all children elements recursively.
Pressing enter to openclose the hovered element is removed.
Also allows click+drag for openclose of element subtrees.
This moves openclose toggling to the openclose operator to
remove duplicate code. The outliner tree building is tweaked
slightly to set the proper parents in scene display mode for walk
select to walk to parents without errors.
Adds an invisible object filter in the outliner to show hidden
objects. This is useful to quickly locate hidden items in a large outliner
tree and easily toggle visibilty back on. Invisible refers to an object
being hidden, or viewport visibility restricted.
Allow selection of subtree elements on a collapsed element's
row. Because subtree elements are aggregated by type, a select on
an icon that represents multiple subtree elements will invoke a
popup menu to select the specific subtree element.
Also draws highlights on cursor hover over a row icon.
Any child elements that are linked to multiple collections will
only be listed in the popup one time, and selection from the
popup will select the first instance in the subtree.
Draw all constraint icons and enable/disable restrict buttons.
The action constraint needs its own icon. It currently draws white
instead of the blue modifier color.
When the active collection is hidden or excluded, change the active
collection to the first visible parent collection. This behavior existed
previously for excluding collections, and is now expanded to also
switch the active collection when viewport hidden or restricted.
This does not prevent viewport hidden or restricted collections from
being reactivated later. This could be added as a separate commit.
Excluded collections cannot be activated, so it may make sense to
extend this behavior to hiding collections.
Adds a toggle to the filter menu for outliner synced selection. Enabled
by default, this ensures selection is synced between objects, bones, and
sequences. An active outliner element theme color is added to indicate
which element is active.
Synced selection is controlled on the operator level. Each operator
that modifies selection for objects, bones, sequences, or outliner
elements needs to call the respective ED_outliner_select_sync_from..
function to tag outliners to be synced.
Syncing is done lazily on outliner draw.
The Normal vector socket in the Normal node wasn't drawn properly and
couldn't be controlled. Additionally, the socket name was drawn over it.
This happened because the socket had a default value of a zero vector.
To fix this, we set the default value to the unit vector `(0, 0, 1)`.
Moreover, we don't draw the UI name if the subtype is `PROP_DIRECTION`.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5503
The soc-2019-outliner branch relied on the previous behavior,
since this is going to be merged soon, postpone this change.
This reverts commit 9dab57a9f8.
We were storing the 'item' part in the RNA path of the override op
itself, which will not work with IDs because overriding local one might
not have the same name as the linked one (when some local ID with same
name already exists).
Now we are properly handling this using the expected actual override
operation, which stores necessary data (names or indices) from both
local and linked data.
This checkbox replaces the "Disabled" and "Enabled" entries in the
filter drop-down. As a result, it now takes a single click to limit the
shown entries to enabled add-ons only. This is also an actual flag in
the preferences, and thus its state is saved between runs on Blender (in
contrast to the filter, which is always reset to "All").
Reviewed by: brecht, billreynish
This fixes the glitching hairs described in T56408, T63534, and possibly
also T63534.
The fix consists of returning the original mesh (i.e. as visible in edit
mode) when constructing the ORCO mesh. This allows a static set of
coordinates to be used when computing the child hair positions.
The original mesh is only returned when it has the same topology (at
least same number of vertices, loops, and polys. It's up the author of
the Alembic file to ensure stable geometry when it's desired to be
compatible with Blender's hair system.
Reviewers: mont29, brecht
Differential Revision: https://developer.blender.org/D5492
The `BKE_material_pop_id()` and `BKE_material_clear_id()` functions had
a parameter `update_data` that, when `false`, would cause the mesh polys
to keep their material index, even when the indexed material slots were
removed. This behaviour was never used in the C code and not supported
by the drawing code, making polygons disappear and causing crashes. The
Python binding in RNA, however, defaulted to `update_data=False`.
This commit removes the `update_data` parameter altogether, and makes
the functions always fix up the material indices.
Reviewed by: mont29, brecht
Building OIDN still needs to be enabled explicitly with --with-oidn.
It will fail with older versions of CMake or TBB, so I can't make
any guarantees for various Linux distributions or versions.
This was a mistake in rB87629b2a7443
`BKE_object_shapekey_free` would never return `true`, so DEG updates
would not happen...
So `ob->shapenr` was not up-to-date etc., leading to crash in
`BKE_mesh_nomain_to_mesh` shapekey handling...
Reviewers: brecht
Maniphest Tasks: T68710
Differential Revision: https://developer.blender.org/D5501
This is 2.7x behavior, while there are plans to improve on this,
committing in case larger changes take longer.
Without this it's not easy to select object data without changing modes.
See D5493
The installer always upgraded the last version installed and did not allow for two versions to be installed side by side.
The reworked installer will allow side by side installs
install order:
```
2.81 -> 2.81a -> 2.82 : Allowed , will result in both 2.82 and 2.81a being installed
2.82 -> 2.81 -> 2.81a : Allowed , will result in both 2.82 and 2.81a being installed
2.82 -> 2.81a : Allowed , will result in both 2.82 and 2.81a being installed
2.82 -> 2.81a -> 2.81 : Not Allowed, 2.81 will only install if you manually remove 2.81a first.
```
Do note though that this will not apply to any previously issued installers and even for 2.80a this is not something we can fix.
This patch is for landing in 2.81 *only* and should be excluded from any possible 2.80a release.
Second change is a change to the compression level, building the MSI takes 30 minutes, which is crazy, perhaps worth it if the compression actually pays of.
```
MSI - none 1:35 247.0 MB (260,025,634 bytes)
MSI - mszip 2:02 89.6 MB ( 94,022,946 bytes)
MSI - low 2:35 81.6 MB ( 85,646,626 bytes)
MSI - medium 4:11 77.3 MB ( 81,136,930 bytes)
MSI - high 28:01 74.7 MB ( 78,384,418 bytes)
zip 1:32 93.2 MB ( 97,732,293 bytes)
7Z 2:22 65.0 MB ( 68,171,614 bytes)
```
It didn't, so I lowered it to medium, seemed reasonable.
Differential Revision: https://developer.blender.org/D5494
Reviewers: brecht, jesterking
But in the future the selection code may also be used in object mode (eg for snapping).
So to avoid using too much VRAM resources, it is good to avoid drawing all objects in the viewport.
The solution was to create an array with only objects that are detected within the selection area.
If the selection operator is modal, objects already detected are not removed from the array until view3d is moved or orbited.
To detect the object, its BoundBox is tested.
Since the Select Engine does not have a dedicated depth texture, whenever a new object is "found" the depth of the objects in the array already drawn is redrawn.
Reviewers: campbellbarton, fclem
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D5435
- When no change is performed on a float button, cancel the action.
- Move left/right clicks into the same block.
- Replace ambiguous names: temp, tempf.
In rB9c010c44f420, DRW_mesh_batch_cache_create_requested was changed to
take a scene (instead of toolsettings directly), but
DRW_draw_depth_object is calling this with with NULL, just checking for
this seems to fix...
Reviewers: fclem
Maniphest Tasks: T68675
Differential Revision: https://developer.blender.org/D5488
Just enable some commented-out code from rB636289b755f6ce (disabled at
that time because we were too close of 2.79 release...).
Issue raised in D5486, thanks.
bf_intern_openvdb makes a significant number of template instantiations
causing it go over the maximum number of sections (int16) in a coff file
when doing a debug build.
This change switches the compiler to use the extended coff format which
has this field extended (int32) all linkers post msvc2005 can process
this format so there's no reason not to turn this on globally.
Clang on windows does not need this change since clang switches implicitly
to the extended format when required. [1]
[1] https://reviews.llvm.org/rL217812
This is done because they don't have the same update frequency. UV can be
persistent even on geometry update (ex: skinned object) but tangents
can change if the normals change.
Also the name buffer per vbo was too small to contain all names.
These functions make possible porting the tools from the sculpt branch, making them compatible with PBVH_FACES and PBVH_BMESH without duplicating the code. They can also help to simplify some existing code.
These functions should not be used when working with PBVH_GRIDS data in SculptSession. PBVH_GRIDS needs to be removed from the sculpt code and converted to PBVH_FACES to be compatible with this API.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5352
These functions deal with voxel remeshing of Mesh data,
and aren't related to MOD_remesh.c for e.g.
Name so other kinds of remeshing wont cause confusion.
For clarity sake, the batch cache now uses exclusively per Loop attributes.
While this is a bit of a waste of VRAM (for the few case where per vert
attribs are enough) it reduces the complexity and amount of overall VBO
to update in general situations.
This patch also makes the VertexBuffers filling multithreaded. This make
the update of dense meshes a bit faster. The main bottleneck is the
IndexBuffers update which cannot be multithreaded efficiently (have to
increment a counter and/or do a final sorting pass).
We introduce the concept of "extract" functions/step.
All extract functions are executed in one thread each and if possible,
using multiple thread for looping over all elements.
Reviewed By: brecht
Differential Revision: http://developer.blender.org/D5424
The voxel remesher introduces a new workflow for sculpting without any of the limitations of Dyntopo (no geometry errors or performance penalty when blocking shapes). It is also useful for simulations and 3D printing.
This commit includes:
- Voxel remesh operator, voxel size mesh property and general remesh flags.
- Paint mask reprojection.
- Geometry undo/redo for sculpt mode. This should support remesh operations as well as future tools that modify the topology of the sculpt in a single step, like trimming tools or mesh insert brushes.
- UI changes in the sculpt topbar and the mesh properties pannel.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5407
When a button represents the whole array (e.g. color picker buttons),
these context menu options were available, but didn't really work
correctly. Since it's not clear how they could reasonably work without
a valid index, it's better to hide them.
This code is needed to implement the Voxel Remesher as well as other features like a better remesh modifier with filters and CSG operations.
Done by Martin Felke and Pablo Dobarro
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5364
This is quite an old comment, recent IDE's/editors
should be able to handle escaped quotes in strings.
If kludges like this are needed, developers should note exactly why.
The menu is not redundant, it is just another way to reach the tool and also give more discoverability of the operator shortcut (Many tools in Blender are also on menus, toolbar or header, just think of Move, Rotate, Scale).
There is also no reason to force the user/artist to change to edit mode for interpolate strokes, when the tool works perfectly in drawing mode too. It would only slow down the 2D animation workflow.
Reviewers: @mendio
We need a custom 'apply override' callback here to prevent resetting
the inverse parent matrix.
Things are now working for basic cases, but complex ones (in production
rigs e.g.) are still partially broken...
The most common use of the text editor seems to be for scripting. Having
line numbers and syntax highlighting enabled by default seems sensible.
Syntax highlighting is now enabled by default, but is automatically
disabled when the datablock has a non-highlighted extension.
Highlighting is enabled for filenames like:
- Text
- Text.001
- somefile.py
and is automatically disabled when the datablock has an extension for
which Blender has no syntax highlighter registered.
Reviewers: billreynish, campbellbarton
Subscribers: brecht, billreynish
Differential Revision: https://developer.blender.org/D5472
To reproduce:
* Split 3D View to show Info Editor
* Change 3D View a few times to various subtypes (Timeline, UV Editor
etc).
Every now and then, the Info Editor should show `UNKNOWN ENUM`. Other
prints may also be lagging behind.
Reviewed By: campbellbarton, brecht
Differential Revision: https://developer.blender.org/D5325
Previously, we had one global `GPU_matrix` stack, so the API was not
thread safe. This patch makes the stack be per `GPUContext`, effectively
making it local per thread (`GPUContext` is located in thread local
storage).
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5405
This commit also provide a compatibility code that will convert old
materials using Additive or Multiply Blend mode to their node equivalent.
This conversion is only done on outputs that are enabled for eevee.
Alpha blended Transparency is now using dual source blending making it
fully compatible with cycles Transparent BSDF.
Multiply and additive blend mode can be achieved using some nodes and are
going to be removed.
To fully support storing colors as a custom property, it is necessary
to allow switching the property UI to the standard color picker button.
That means in effect supporting custom property subtype values.
Change RNA_property_subtype to look for a 'subtype' string field
in _RNA_UI and parse it as an enum value. To minimize performance
impact, only do it if the property is an array; also, don't use
the custom subtype during RNA path parsing.
On the python side, allow setting some most useful seeming values
from the custom property settings editor.
Also, since some color picker code seems to run into a risk of
buffer overruns if the array size is wrong, check the size in
the UI layout code to be safe.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D5475
This could happen e.g. when changing smoke type from flow to domain or
connecting a volume shader with to a domain without an actual flow type
around.
Fixes T58569, T68359
Reviewers: brecht
Maniphest Tasks: T58569, T68359
Differential Revision: https://developer.blender.org/D5478
If the option is enabled, the output is clamped to the target range.
The target range is [To Min, To Max]. The option is enabled by default.
The clamp option is implemented in EEVEE by linking to the `clamp_value`
GLSL function. And it is implemented in Cycles using a graph expand
function.
Reviewers: brecht, JacquesLucke
Differential Revision: https://developer.blender.org/D5477
This patch adds a new node that clamps a value between a maximum and
a minimum values.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5476
The calls to `BKE_animsys_evaluate_all_animation()` and
`BKE_mask_evaluate_all_masks()` used the wrong timecode to evaluate the
animation system. This happened:
- Sequencer in scene A was rendered at frame X.
- Scene strip for scene B which should be evaluated at frame Y.
- BKE_animsys_evaluate_all_animation() was called with frame Y, which
also re-evaluated the animation data in scene A.
- Other sequencer strips with animated values were then evaluated for
frame Y and not frame X.
Since the depsgraph for rendering the scene strip is already OK and does
its job, it's no longer necessary to re-evaluate all the animation in
this way.
Removed `BKE_mask_evaluate_all_masks()` because it's no longer used.
Reviewers: sergey, brecht, iss
Differential Revision: https://developer.blender.org/D5394
This patch adds a new Map Range node that linearly remaps an input
value from a range to another. This node is similar to the compositor's
Map Range node.
Reviewers: brecht, JacquesLucke
Differential Revision: https://developer.blender.org/D5471
In some rare cases it is convenient to store a short array value
as a custom property, e.g. a vector or color. For example, it may
be helpful when importing/exporting certain formats that support
custom or nonstandard attributes on objects.
The custom property storage already can handle arrays in order to
support properties defined via python. The only thing missing is
UI support (and some bugs), and this patch fixes that:
- Allow editing short array properties via Custom Properties panel.
- Fix a UI layout sizing bug triggered by the previous item.
- Fix a dependency graph bug with drivers using such properties.
- Make RNA_*_get_default_array code robust in case of size mismatch.
- Support custom default values for array properties, allowing
both an array and a scalar value.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D5457
i18n code does not work from threads on some plaforms, so it is disabled
in Blender when called from non-main thread.
Means that we have to go to a slightly different approach, with dirty
tag and generating string on request for UI.
Note: Also had to update the `info` string size, to fit with expensive
asiatic scripts in utf-8... Using mem for that kind of runtime data is
not really nice, but for now it will have to do.
Make the transforms section of the properties panel consistent with
the transforms section of the side-bar, and to expose some currently
hidden BBone properties in the Bendy Bone section.
- Object transformations were not consistent with Pose Bone
transformations in that they did not use single-column layout.
- Even in Pose Bone transformations,
the rotation mode option was after Scale.
- Edit Bone Transforms panel included "Tail Radius" and
"Envelope Deform Distance", neither of which belong there. See T65670.
- Expose bbone_x and bbone_z.
D5454 by @Mets
We can add more fine grained checks for when these flags are supported so
that adding asan flags manually still has all the workarounds, but for now
compiling succesfully is more important.
In Grease Pencil Edit Mode the Select menu should always be visible. Right now the menu visibility is controlled by the Selection Mask button next interpolate popover
Differential Revision: https://developer.blender.org/D5466
Not even in append case. If those objects are already part of a
collection, we can now leave them fully un-instantiated in any scene,
since user can easily do it themselves as they need to.
merge/dissolve distance is actually a maximum, not a minimum
Reviewers: campbellbarton
Maniphest Tasks: T66922
Differential Revision: https://developer.blender.org/D5462
Some brush tools were being executed too often when using devices with high polling rates, causing performance issues. This should improve the performance of brushes that don't need those updates.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5429
This fixes inconsistencies in materials between objects and obdata
due to placeholders generation for missing libdata.
Note that we cannot do that when generating the obdata placeholder,
as not all objects using it might be already loaded...
So this has to be done near the end of the reading/linking process.
Reported here by Blender Studio.
Reviewers: brecht
Subscribers: jbakker, zeddb
Tags: #datablocks_and_libraries
Differential Revision: https://developer.blender.org/D5428
'cached' particles (for paths actually) are only generated for some kind
(hair, keyed, and baked system afaik), not for all.
Note that we could probably just use directly `totpart` and `totchild`,
but keeping code as close to what it was as possible, for now...
- Grey out the option when factory settings have been loaded.
- Note it it's tool-top that it's ignored when factory settings
have been loaded.
Suggestions by @JulienKaspar
Change the default drawing method of vector sockets to use a column layout.
This allows more interactive use of nodes and avoids the one or two clicks
needed to edit vector sockets in the old default component layout.
Developers may still use the component layout by flaging the socket with the
`SOCK_COMPACT` socket flag. For now, we choose to draw the SSS scale vector
of the Principled and SSS nodes in a compact form because they don't require
much interactivity.
Reviewers: brecht, JacquesLucke
Differential Revision: https://developer.blender.org/D5458
The selection tool must be hidden if the sculpt mask is not enabled because these options are not usable in this mode.
Also, the Select tools have been moved to the bottom of the toolbar.
Now, the logic is similar to Meshes.
Differential Revision: http://developer.blender.org/D5452
Before, the length variable was reused for Sample and Merge Simplify. Now, the Merge has its own distance property and variable in the modifier struct.
See Design task T68277, and patch D5423.
This commit includes edits by @ideasman42 to patch in
branch temp-D5423-update, plus responses to his comments.
The Grease Pencil Stroke Menu in Edit mode is cluttered with operators that act over stroke, points or the entire object.
To keep the consistency of the edit menu with other Blender Objects, we should separate the menu in: Grease Pencil - Stroke - Point.
Also we should add some missing operators and other menus like Show/hide or Weights among others
Differential Revision: http://developer.blender.org/D5449
The Sequencer/Preview Menu is a mixture of both the Sequencer and the Preview menu functions, but they are currently not presented in an organized way.
Moved the Preview Zoom functions up next to the Sequencer Zoom functions with a separator in between.
Moved the Preview Show functions up next to the Sequencer Show functions with a separator in between.
Uncommented Show Framenumber Indicator, since it does not work or have a function after scrubbing in the timebar was implemented.
Renamed Show Metadata to Show Image Metadata, since it does only show metadata for images.
Added Show Annotations to View Menu for consistency.
Added Frame Overlay to View Menu for consistency.
Added Fractional Zoom to a sub-menu, since Sequencer/Preview View menu became too long. This sub-menu is in consistency with the Fractional Zoom menu in the Image Editor.
In Sequencer/Preview mode the Fractional Zoom will be named Fractional Preview Zoom, to specify that this function is only for the Preview.
Patch by Peter Fog (tintwotin)
Differential Revision: https://developer.blender.org/D5339
The Shear transform operator is now disallowed in the timeline and
dopesheet editors.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D5440
The old text, "Save modified preferences on exit" suggests that only the
modified preferences are saved. This is not the case: all preferences
are saved at once. This distinction is especially important after having
loaded factory default settings.
As discussed with @campbellbarton and @JulienKaspar.
The functions are now divided into two nested sub panels, since it makes it easier to navigate through the options.
The Location values are moved above the Alignment values, to avoid the confusion that the alignment values could be presets for the location.
In the menu and context menu the Text Effect strip was among the functions which had the Input sub menu visible. Text strips do not take strip inputs, so this is a bug, which is solved with this diff.
Patch by Peter Fog (tintwotin)
Differential Revision: https://developer.blender.org/D5142
This removes the Brush pulldown menu from Sculpt and Paint modes. This menu only contained a random duplicated subset of brush options. Now everything is accessible centrally in the Brush Tool Settings.
The Sculpt menu likewise contained various random brush options. These are removed and replaced by a list of commands, just like the other paint modes.
Also removes the Show Mask option from the mode options panel since this is also in Overlays.
Reviewers: Campbell Barton
Differential Revision: https://developer.blender.org/D5420
This option uses the same logic of the merge by distance but as an option of modifier to allow dynamic merge.
This option will be very useful for LANPR generated strokes.
This mode simplify the stroke doing a resampling of the points and generate new geometry at the distance defined.
Sample function developed by @NicksBest
New Resample Stroke operator
This operator recreates the stroke geometry with a predefined length between points.
The operator uses the same code used in Simplify modifier.
Reviewers: @mendio
Merge points when the distance is less than a predefined value.
The method to interpolate the position created a wrong merge. Now, always the secondary point is merged with the first one (merge at first), except the last point.
- Add "Live Edit" to Text menu.
- "Top/Bottom of File" renamed to "Top/Bottom" and placed in Navigation sub-menu.
- Added navigation functions to Navigation menu,
since they were not exposed in the menus.
- Added selection functions to Select menu,
since they were not exposed in the menus.
- Moved the Select menu to the Header in consistency with the 3D View.
- Inserted comment in context menu.
D5434 with edits.
When using Vertex or Weight paint mode on a wireframe the overlay was
blended with the background. In this case we now use alpha blending.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D5340
The matrices that projects background images in the 3d view
were incorrect. The root cause was that the coordinate systems were not
respected, that was most noticeable when rotating a stretched image.
We re-validated conversions of coordinate spaces (UV -> Image -> Camera -> Window)
and made sure that the rotation is done in image space.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D5431
It is easier to deal with private values of the DRW_select engine and gives room for improvement.
Reviewers: campbellbarton, fclem
Differential Revision: https://developer.blender.org/D5415
`ED_view3d_select_id_read_rect` serves only as a bridge to `DRW_framebuffer_select_id_read`.
Keeping these codes similar only increases the complexity of some functions.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D5415
COMMAND${CMAKE_COMMAND}-Ecopy"${PYTHON_OUTPUTDIR}/python${PYTHON_SHORT_VERSION_NO_DOTS}${PYTHON_POSTFIX}.lib"${BUILD_DIR}/python/src/external_python/run/libs/python${PYTHON_SHORT_VERSION_NO_DOTS}.lib#missing postfix on purpose, distutils is not expecting it
COMMAND${CMAKE_COMMAND}-Ecopy"${PYTHON_OUTPUTDIR}/python${PYTHON_SHORT_VERSION_NO_DOTS}${PYTHON_POSTFIX}.lib"${BUILD_DIR}/python/src/external_python/run/libs/python${PYTHON_SHORT_VERSION_NO_DOTS}${PYTHON_POSTFIX}.lib#other things like numpy still want it though.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
