The `OUTLINER_OT_item_activate` operator, although it detects when
something changes, always returns `OPERATOR_FINISHED` and thus induces
the creation of undo steps.
So return `OPERATOR_CANCELLED` when nothing changes.
Ref T94080
Reviewed By: Severin
Maniphest Tasks: T94080
Differential Revision: https://developer.blender.org/D13638
- Fix assert on size.
- Fix void * casting.
- Pass extent by values.
- Add swap function to avoid letting the types copyable.
- Add back the GPUTexture * operator on TextureFromPool.
Does two main changes:
* Handle regions in the order as visible on screen. Practically this
just means handling overlapping regions before non-overlapping ones.
* Don't handle any other regions after having found one containing the
mouse pointer.
Fixes: T94016, T91538, T91579, T71899 (and a whole bunch of duplicates)
Addresses: T92364
Differential Revision: https://developer.blender.org/D13539
Reviewed by: Campbell Barton
Asserts that such events actually always lead to a handler return value
that actually keeps the event passing.
Reviewed by Campbell Barton as part of
https://developer.blender.org/D13539.
Though the edge vertices aren't really meant to have an order,
it can make a difference in operations when there isn't any other
information to make decisions from, like etruding a circle of
loose edges (the situation in the report). This commit changes
the order of the vertices in the final cyclic edge to go in the
same direction as all of the other edges.
The vertex and face normals from the input mesh
were used to calculate the normals on the result,
which could cause a crash because the result should
be about twice as large.
Also remove an unnecessary dirty tag, since it is handled
automatically when creating a new mesh or in the case
of the mirror modifier, when calculating the new custom
face corner normals.
Swap "active" and "selected" in the tooltip if the `use_reverse_transfer`
option is activated.
Reviewed By: mont29
Maniphest Tasks: T85233
Differential Revision: https://developer.blender.org/D13499
Also fixes similar issues regarding some liboverride menu entries.
Reviewed By: mont29
Maniphest Tasks: T93766
Differential Revision: https://developer.blender.org/D13513
Add `USD Preview Surface From Nodes` export option, to convert a
Principled BSDF material node network to an approximate USD Preview
Surface shader representation. If this option is disabled, the original
material export behavior is maintained, where viewport setting are saved
to the Preview Surface shader.
Also added the following options for texture export.
- `Export Textures`: If converting Preview Surface, export textures
referenced by shader nodes to a 'textures' directory which is a
sibling of the USD file.
- `Overwrite Textures`: Allow overwriting existing texture files when
exporting textures (this option is off by default).
- `Relative Texture Paths`: Make texture asset paths relative to the
USD.
The entry point for the new functionality is
`create_usd_preview_surface_material()`, called from
`USDAbstractWriter::ensure_usd_material()`. The material conversion
currently handles a small subset of Blender shading nodes,
`BSDF_DIFFUSE`, `BSDF_PRINCIPLED`, `TEX_IMAGE` and `UVMAP`.
Texture export is handled by copying texture files from their original
location to a `textures` folder in the same directory as the USD.
In-memory and packed textures are saved directly to the textures folder.
This patch is based, in part, on code in Tangent Animation's USD
exporter branch.
Reviewed By: sybren, HooglyBoogly
Differential Revision: https://developer.blender.org/D13647
Downgrade the Python zstandard from 0.17.0 to 0.16.0. The Python package
should be linked against the exact same version of libzstd as Blender is,
otherwise it will refuse to load from within the Blender executable.
Python zstandard 0.17.0 links to 1.5.1, whereas we need 1.5.0.
`chardet` was replaced by `charset_normalizer` for modern `requests`.
With this change, `{make,ninja} install` will also copy the latter into
Blender's install directory.
This opt-in functionnality enabled developper keep track of unused
resources present in the `GPUShaderCreateInfo` descriptors of their
shaders.
The output is pretty noisy at the moment so we do not enforce its usage.
While install_deps tries to stay as close as possible from official
Blender versions of the libraries, it also strives to use as many distro
packages as possible.
OSL 1.11.16.0 is the minimal version that builds with llvm13, which is
the default llvm/clang version in e.g. Debian testing.
Adds two new attribute outputs:
"Line" outputs the line number of the character.
"Pivot Point" outputs the selected pivot point position per char.
Some refactoring of the text layout code.
Differential Revision: https://developer.blender.org/D13694
`node_exec` had some code that was specific to texture/shader nodes.
These functions arent used outside there module so limit there declarations.
Also make a function static that is only used in `node_exec.c`
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D13899
The `TreeElement.rnaptr` was only needed for RNA tree-elements. Now it
can be gotten through the new type specific classes, e.g.
`TreeElementRNAProperty.getPointerRNA()`.
Plan is to remove things like `TreeElement.directdata` and to instead
expose specific queries in the new type specific tree-element classes.
e.g. like here: `TreeElementSequence.getSequence()`
For now uses `tree_element_cast<>()` to get the new type specific
tree-element, later these should replace `TreeElement` all together.
Add function to safely request the type-specific C++ element from a
C-style `TreeElement`. Looks like this:
```
TreeElementFoo *te_foo = tree_element_cast<TreeElementFoo>(te);
```
The "cast" will return null if the tree-element doesn't match the
requested type.
This is useful for the transition from the C-style type to the new ones.
This uses a light parser / string modification pass to convert
C++ enum declaration syntax to GLSL compatible one.
GLSL having no support for enums, we are forced to convert the
enum values to a series of constant uints.
The parser (not really one by the way), being stupidly simple,
will not change anything to the values and thus make some C++
syntax (like omitting the values) not work.
The string replacement happens on all GLSL files on startup.
I did not measure significant changes in blender startup speed.
There is plans to do all of this at compile time.
We limit the scope of the search to `.h` and `.hh` files to prevent
confusing syntax in `.glsl` files.
There is basic error reporting with file, line and char logging
for easy debuggabiliy.
The requirements to use this enum sharing system are already listed in
`gpu_shader_shared_utils.h` and repeated on top of the preprocessor
function.
Remove small ray offsets that were used to avoid self intersection, and leave
that to the newly added primitive object/prim comparison. These changes together
significantly reduce artifacts on small, large or far away objects.
The balance here is that overlapping primitives are not handled well and should
be avoided (though this was already an issue). The upside is that this is
something a user has control over, whereas the other artifacts had no good
manual solution in many cases.
There is a known issue where the Blender particle system generates overlapping
objects and in turn leads to render differences between CPU and GPU. This will
be addressed separately.
Differential Revision: https://developer.blender.org/D12954
Caused by 0f89bcdbeb where it was needed for cage and evaluated mesh
to have same behavior in respect of having edit_mesh pointer assigned.
This change makes it so that edit_data is not implied to exist when the
edit_mesh pointer is not null. This was already the case in some other
code.
Those cases are almost always synptoms of either bug in code, or broken
files. Re-doin resync on them only costs time and causes extra trash
data as a result, without really helping in any way.
Both new normals (from rBb7fe27314b25) and vpaint (from rBf7bbc7cdbb6c)
RNA arrays were missing the `PROPOVERRIDE_IGNORE`. Those huge blobs of
geometry data should never be processed by liboverride code.
This enables support for node group assets. Previously, node group
assets only worked when the "extended asset browser" experimental
features is enabled.
Differential Revision: https://developer.blender.org/D13748
For node groups there is no good default preview generation.
Nevertheless, t would be useful to generate a preview image for a
node group by rendering an object in some cases.
This commit adds a new operator that allows updating the preview
image for the active asset by rendering the active object.
Note, the operator can also be used for other asset types, not just
node groups.
The operator can be found in a menu right below the refresh-preview
button. Currently it is the only operator in that menu. In the future,
more operators to create previews may be added.
Differential Revision: https://developer.blender.org/D13747
The VSE and node editor only uses an overlay buffer to draw to the screen. The
GPUViewport assumes that platforms clears all textures during creation, but
they do not on selected platforms. What would lead to drawing from
uncleared memory.
This patch fixes this by clearing all viewport textures during creation.
Also adds a few things to GPUShader for easily create shaders.
Heavy usage of macros to compose the createInfo and avoid
duplications and copy paste bugs.
This makes the link between the shader request functions
(in workbench_shader.cc) and the actual createInfo a bit
obscure since the names are composed and not searchable.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D13910
Continuation of work started in 2e221de4ce and 249e4df110.
Adds new tree-element classes for RNA structs, properties and array
elements. This isn't exactly a copy and paste, even though logic should
effectively be the same. Further cleanups are included to share code in
a nice way, improve code with simple C++ features, etc.
This fixes failing test cases when using `make test`.
See {D13615} for more information.
The fix will perform the id remapping one item at a time. Although not
really nice, this isn't a bottleneck.
The failing test cases is because space_node stores pointers multiple
times and didn't update all pointers. It was not clear why it didn't do
it, but changing the behavior more to the previous behavior fixes the
issue at hand.
I prefer to remove the double storage of the node tree pointers (in
snode and path) to reduce pointer management complexity.
During sprite fright loading of complex scenes would spend a long time in remapping ID's
The remapping process is done on a per ID instance that resulted in a very time consuming
process that goes over every possible ID reference to find out if it needs to be updated.
If there are N of references to ID blocks and there are M ID blocks that needed to be remapped
it would take N*M checks. These checks are scattered around the place and memory.
Each reference would only be updated at most once, but most of the time no update is needed at all.
Idea: By grouping the changes together will reduce the number of checks resulting in improved performance.
This would only require N checks. Additional benefits is improved data locality as data is only loaded once
in the L2 cache.
It has be implemented for the resyncing process and UI editors.
On an Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz 16Gig the resyncing process went
from 170 seconds to 145 seconds (during hotspot recording).
After this patch has been applied we could add similar approach
to references (references between data blocks) and functionality (tagged deletion).
In my understanding this could reduce the resyncing process to less than a second.
Opening the village production file between 10 and 20 seconds.
Flame graphs showing that UI remapping isn't visible anymore (`WM_main_remap_editor_id_reference`)
* Master {F12769210 size=full}
* This patch {F12769211 size=full}
Reviewed By: mont29
Maniphest Tasks: T94185
Differential Revision: https://developer.blender.org/D13615
This reverts commit 086f191169.
There was apparently a problem using APPEND which wasn't referenced
in the commit log.
Added comment noting the reason for the discrepancy.
Use more efficient logic for detecting when gizmos are under the cursor.
Even though this isn't a bottleneck, it runs on cursor motion in the
3D viewport, so avoiding any lag here is beneficial.
The common case for cursor motion without any gizmos was always
drawing two passes (one small, then again if nothing was found).
Now a single draw call at the larger size is used.
In isolation this gives around 1.2x-1.4x speedup.
When there are multiple gizmos a depth-buffer picking is used
(similar to object / bone selection) which is more involved but
still only performs 2x draw calls since the result is cached for reuse.
See note in gizmo_find_intersected_3d for a more detailed explanation.
Also restore the depth values in the selection result as they're
needed for gizmos to use selection bias.
Broken since support for GL_SELECT was removed.
Early on in 2.8x development gizmo-depth used GL_SELECT,
which has been removed. Bind the depth buffer so occlusion queries
use the front-most gizmo.
While this report only mentions face-maps, gizmo depth was ignored in
all cases. This wasn't noticeable in most cases though since the
transform gizmo for example was placed so gizmos didn't overlap.
When calling GPU_select_cache_begin, checking the selection mode used
the last used selection mode, not the one about to be used.
Using border select, then picking would not use the selection cache.
This wasn't noticeable by users as failing to use cache just completes
the selection without it (drawing the depth buffer unnecessarily).
The OSL image compilation step needed to be taught about the new UVTILE
format for UDIM textures.
A small missing feature from OIIO[1] means this is a bit uglier than it
needs to be. Once we update to a version of OIIO with the fix we can
remove the string replace part.
[1] 35cb6a83e2
Differential Revision: https://developer.blender.org/D13912
This was already done for APPLE & WIN32, which would
reference these libraries twice.
Now append BROTLI_LIBRARIES to FREETYPE_LIBRARIES when they're
required for linking.
No functional changes as all references to FREETYPE_LIBRARIES also
used BROTLI_LIBRARIES.
When LIBDIR existed, searching for system libraries would always
first search 'LIBDIR'.
This meant "WITH_SYSTEM_*" would still prefer LIBDIR versions of
libraries if they exist.
The presence of LIBDIR also ignored the setting for WITH_STATIC_LIBS
which is now restored to the cached value once pre-compiled libraries
have been handled.
Fix formula in function `SEQ_sound_update_length`.
Formula for sound strip length was changed in commit ded68fb102, when
strip is added to timeline, but it was not changed in function
mentioned above.
This change applies only for automatic proxy building, when strip
is added to timeline. Manual building process is not affected.
Don't build proxy file if movie is already fast enough to seek.
To determine seek performance, check if whole GOP can be decoded
in 100 milliseconds.
To consider some variation in GOP size, large number of packets are
read, assuming that each packet will produce 1 frame. While this is not
technically correct, it does give quite accurate estimate of maximum GOP
size.
This test will ensure consistent performance on wide array of machines.
Check should be done in order of few milliseconds.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11671
This will allow building most deps with VS2019
SDL has some linker issues that are resolved in
a newer version, but that would be better handled
in a separate change.
VS2013 and VS2015 support which was broken has
been removed.
In order to use a workaround builtin uniform, we need to count it
just like other uniforms and give it some space in the name buffer.
This also fixes extensions being added after the uniform declaration.
All `#extension` directives are now part of the gl backend.
This commit moves the weld modifier code to the geometry module
so that it can be used in the "Merge by Distance" geometry node
from ec1b0c2014. The "All" mode is exposed in the node
for now, though we could expose the "Connected" mode in the future.
The modifier itself is responsible for creating the selections from
the vertex group. The "All" mode takes an `IndexMask` for the
selection, and the "Connected" mode takes a boolean array,
since it actually iterates over all edges.
Some disabled code for a BVH mode has not been copied over,
it's still accessible through the patches and git history anyway,
and it made the port slightly simpler.
Differential Revision: https://developer.blender.org/D13907
Previously it was only part of experimental features in beta, however now
renderers can render point clouds generated by geometry nodes. Adding or
converting a point cloud object directly is still hidden by default, since
there is no good way to edit it.
This implements a merge by distance operation for point clouds.
Besides the geometry input, there are two others-- a selection
input to limit the operation to certain points, and the merge
distance. While it would be a reasonable feature, the distance
does not support a field currently, since that would make
the algorithm significantly more complex.
All attributes are merged to the merged points, with the values
mixed together. This same generic method is used for all attributes,
including `position`. The `id` attribute uses the value from the
first merged index for each point.
For the implementation, most of the effort goes into creating a
merge map to speed up attribute mixing. Some parts are inherently
single-threaded, like finding the final indices accounting for the
merged points. By far most of the time is spend balancing the
KD tree.
Mesh support will be added in the next commit.
Differential Revision: https://developer.blender.org/D13649
Only show options that are valid for the used device (CPU, GPU, Multi).
Note: The panel isn't shown for OPTIX anymore, unless Multi device is used.
Reference: https://developer.blender.org/D13592
Make the Embree RTC_SCENE_FLAG_COMPACT flag optional and enabled per default.
Disabling it makes CPU rendering a bit faster in some scenes at the cost of a higher memory usage.
Barbershop renders about 3% faster, victor about 4% on CPU with compact BVH disabled.
Differential Revision: https://developer.blender.org/D13592
Several sub commands tried on their own
to locate python, given I wanted to look
in several locations for a broader libdir
compatibility this is best done in a
central location.
Python 3.9 is still preferred, but if
3.10-3.12 are available that be accepted
as well.
note: this is about the python version
make.bat uses to run various python helper
scripts, this change has no influence on
the python version blender itself uses.
With (center) position, radius and random value outputs.
Eevee does not yet support rendering point clouds, but an untested
implementation of this node was added for when it does.
Ref T92573
Movies with variable frame rate can cause mismatch of displayed frame
when proxies are used. Since proxies are not used for rendering, this
means, that output may be different than expected. This problem can be
avoided when timecodes are used.
Set used timecode to Record Run. Timecodes are built with proxies at
the same time, therefore if proxies are built and used this will
resolve possible mismatch of output.
Record run is chosen, because it will show frames based on time they
were encoded by encoder and should match behavior as if movie was
played back at normal speed. This change is done only for new strips
in order to not overwrite user defined settings.
Other minor changes:
- When proxies are enabled, size 25% is no longer set by default. It was mostly annoying anyway.
- Silence warning when timecode file is not present. This was introduced in 4adbe31e2f.
Previously use of timecodes was hard-coded in sequencer and this error would spam console if timecodes would be
enabled by default and proxies would be never built.
ref: T95093
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D13905
Using a negative linesize to flip an image vertically is supported in
ffmpeg but not for every function.
This method treats frames that need and those that do not need alignment
the same. An RGBA frame buffer with alignment that ffmpeg decides is
optimal for the CPU and build options is allocated by ffmpeg.
The `sws_scale` does the colorspace transformation into this RGBA frame
buffer without flipping. Now the image is upside down and aligned.
The combined unaligning and vertical flipping is then done by
`av_image_copy_to_buffer` which seems to handle negative linesize
correctly.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D13908
Layer resync code would not yet fully properly deal with all possible
invalid status of ViewLayer comming from those older files.
Now put 2.80-doversion specific fixes into their own dedicated
function, so that they do not affect actual regular layer resync code
anymore. Also added some sanity-checks in main
`BKE_layer_collection_sync` code.
The Brotli library only needs to be explicitly linked when using the
statically linked libraries. When using system libs they're shared, and
the .so loading mechanism takes care of dependencies.
Currently the Boolean Math node only has 3 basic logic gates:
AND, OR, and NOT. This commit adds 6 additional logic gates
for convenience and ease of use.
- **Not And (NAND)** returns true when at least one input is false.
- **Nor (NOR)** returns true when both inputs are false.
- **Equal (XNOR)** returns true when both inputs are equal.
- **Not Equal (XOR)** returns true when both inputs are different.
- **Imply (IMPLY)** returns true unless the first input is true and
the second is false.
- **Subtract (NIMPLY)** returns true when the first input is true and
the second is false.
Differential Revision: https://developer.blender.org/D13774
ssize_t is a posix type pyconfig.h previously
supplied for MSVC, it appears to have stopped
doing this in the python 3.10 headers.
Py_ssize_t is the type of the field this macro
actually returns, so best to to use that in our
code as well.
This reverts commit 948211679f.
This commit introduced some regressions in the test suite.
As this change is a core part of blender Bastien and I decided to revert
it as the solution isn't clear and needs more investigation.
The following tests FAILED:
62 - blendfile_liblink (SEGFAULT)
63 - blendfile_library_overrides (SEGFAULT)
It fails in (id_us_ensure_real)
This makes optionnal the use of a different interface for the geometry
shader stage output. When the vertex and geometry interface instance name
matches, a `_in` and `_out` suffix is added to the end of the instance name.
This makes it easier to have optional geometry shader stages.
# Conflicts:
# source/blender/gpu/intern/gpu_shader_create_info.hh
During sprite fright loading of complex scenes would spend a long time in remapping ID's
The remapping process is done on a per ID instance that resulted in a very time consuming
process that goes over every possible ID reference to find out if it needs to be updated.
If there are N of references to ID blocks and there are M ID blocks that needed to be remapped
it would take N*M checks. These checks are scattered around the place and memory.
Each reference would only be updated at most once, but most of the time no update is needed at all.
Idea: By grouping the changes together will reduce the number of checks resulting in improved performance.
This would only require N checks. Additional benefits is improved data locality as data is only loaded once
in the L2 cache.
It has be implemented for the resyncing process and UI editors.
On an Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz 16Gig the resyncing process went
from 170 seconds to 145 seconds (during hotspot recording).
After this patch has been applied we could add similar approach
to references (references between data blocks) and functionality (tagged deletion).
In my understanding this could reduce the resyncing process to less than a second.
Opening the village production file between 10 and 20 seconds.
Flame graphs showing that UI remapping isn't visible anymore (`WM_main_remap_editor_id_reference`)
* Master {F12769210 size=full}
* This patch {F12769211 size=full}
Reviewed By: mont29
Maniphest Tasks: T94185
Differential Revision: https://developer.blender.org/D13615
This patch migrates the draw manager hair refine compute shader to use
GPUShaderCreateInfo.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D13915
Allows to perform correction of coordinate delta/displacement in a
similar way of how sculpt mode handles sculpting on a deformed mesh.
An example of usecase of this is allowing riggers and sciprters to
improve corrective shapekey workflow.
The usage consists of pre-processing and access. For example:
object.crazyspace_eval(depsgraph, scene)
# When we have a difference between two vertices and want to convert
# it to a space to be stored, say, in shapekey:
delta_in_orig_space = rigged_ob.crazyspace_displacement_to_original(
vertex_index=i, displacement=delta)
# The reverse of above.
delta_in_deformed_space = rigged_ob.crazyspace_displacement_to_deformed(
vertex_index=i, displacement=delta)
object.crazyspace_eval_clear()
Fuller explanation with actual usecases and studio examples are written in
the comment:
https://developer.blender.org/D13892#368898
Differential Revision: https://developer.blender.org/D13892
Brotli seems to add a custom postfix to its static libraries by default,
but in Debian at least libraries are just named the same for both shared
and static versions, as usual.
So add standard name after static-specific ones.
Follow-up to rB4c617c06e9cb and rBa000de7c2a4d.
The evaluated mesh is a result of evaluated modifiers, and referencing
other evaluated IDs such as materials.
It can not be stored in the EditMesh structure which is intended to be
re-used by many areas. Such sharing was causing ownership errors causing
bugs like
T93855: Cycles crash with edit mode and simultaneous viewport and final render
The proposed solution is to store the evaluated edit mesh and its cage in
the object's runtime field. The motivation goes as following:
- It allows to avoid ownership problems like the ones in the linked report.
- Object level is chosen over mesh level is because the evaluated mesh
is affected by modifiers, which are on the object level.
This patch allows to have modifier stack of an object which shares mesh with
an object which is in edit mode to be properly taken into account (before
the change the modifier stack from the active object will be used for all
objects which share the mesh).
There is a change in the way how copy-on-write is handled in the edit mode to
allow proper state update when changing active scene (or having two windows
with different scenes). Previously, the copt-on-write would have been ignored
by skipping tagging CoW component. Now it is ignored from within the CoW
operation callback. This allows to update edit pointers for objects which are
not from the current depsgraph and where the edit_mesh was never assigned in
the case when the depsgraph was evaluated prior the active depsgraph.
There is no user level changes changes expected with the CoW handling changes:
should not affect on neither performance, nor memory consumption.
Tested scenarios:
- Various modifiers configurations of objects sharing mesh and be part of the
same scene.
- Steps from the reports: T93855, T82952, T77359
This also fixes T76609, T72733 and perhaps other reports.
Differential Revision: https://developer.blender.org/D13824
The Equalize Handles operator allows users to make selected handle
lengths uniform: either respecting their original angle from the key
control point or by flattening their angle (removing the overshoot
sometimes produced by certain handle types).
Design: T94172
Reviewed by: sybren
Differential Revision: https://developer.blender.org/D13702
Some IDs (like text ones) can be linked and only kept around thanks to
editors, allow making such IDs local in `BKE_lib_id_make_local_generic`.
Also refactor logic checking whether ID should be made directly local or
copied into its own util function, so that we can remain sure all
special-cases 'make local' code still uses the same logic here.
Currently there are many function declarations in `BKE_node.h` that
don't actually have implementations in blenkernel. This commit moves
the declarations to `NOD_composite.h`, `NOD_texture.h`, and
`NOD_shader.h` instead. This helps to clarify the purpose of the
different modules.
Differential Revision: https://developer.blender.org/D13869
Fixes T93680
For current drivers of Intel HD Graphics 4400 and 4600, various Program Introspection functions appear broken and return incorrect values, causing crashes in the current handling of SSBOs. Disable use of this feature on those devices. Add checks to features that use SSBOs (Hair and Subdivision Modifier).
Reviewed By: fclem, jbakker
Maniphest Tasks: T93680
Differential Revision: https://developer.blender.org/D13806
The point IBO should only have data for coarse vertices (or in general,
the vertices in the original mesh). As it used for displaying the
vertices for selection in edit mode, and as it indexes into the VBOs for
the positions and edit data, it is itself only indexed by coarse/
original vertex index.
For the subdivision case, this would allocate space for the final
subdivision vertex and reallocate to make room for loose geometry,
although only the first coarse vertex count amount of data would be.
Now just allocate for the required memory. Also reuse index buffer APIs
instead of doing manual work.
unity launches blender in background mode to do some
file conversions, ever since the launcher got introduced
this process broke.
The root cause here is: Unity looks up the default program
to launch .blend files with, which is now the launcher, then
launches it in background mode with a script to export the data.
The launcher however was designed to exit as quickly as
possible so there would not be an extra background process
lingering. It does not wait for blender to exit and does not
pass back any error codes.
This broke unity's workflow since it assumed if the process
exits and succeeds the data *must* be ready for reading which
no longer holds true.
This change keeps the launcher design as was previously,
*except* when launching in background mode, then it
waits and passes back any error codes, thus restoring
unity's workflow.
Differential Revision: https://developer.blender.org/D13894
Reviewed by: LazyDodo, Brecht
Previously weight paint wasn't hooked up to the "Smooth" and "Invert" modes.
With this patch it is not possible to use the "Smooth" and "Invert"
modifiers for the draw keybindings.
Reviewed By: Campbell Barton
Differential Revision: http://developer.blender.org/D13857
Add `libbrotlidec-static.a` and `libbrotlicommon-static.a` to the CMake
`$FREETYPE_LIBRARIES` variable; they'll be required when the Linux libs
for the FreeType upgrade lands (D13448).
The order of libraries is different compared to the similar lines in the
Windows and Apple CMake files, to prevent linker errors on Linux.
Some drivers/glsl compilers will not warn about multiple resources using
the same binding, creating silent errors.
This patch checks for this case and outputs a descriptive error message if
a particular createInfo merge error is founds.
Other validation can be added later.
This patch introduces an extrude node with three modes. The vertex mode
is quite simple, and just attaches new edges to the selected vertices.
The edge mode attaches new faces to the selected edges. The faces mode
extrudes patches of selected faces, or each selected face individually,
depending on the "Individual" boolean input.
The default value of the "Offset" input is the mesh's normals, which
can be scaled with the "Offset Scale" input.
**Attribute Propagation**
Attributes are transferred to the new elements with specific rules.
Attributes will never change domains for interpolations. Generally
boolean attributes are propagated with "or", meaning any connected
"true" value that is mixed in for other types will cause the new value
to be "true" as well. The `"id"` attribute does not have any special
handling currently.
Vertex Mode
- Vertex: Copied values of selected vertices.
- Edge: Averaged values of selected edges. For booleans, edges are
selected if any connected edges are selected.
Edge Mode
- Vertex: Copied values of extruded vertices.
- Connecting edges (vertical): Average values of connected extruded
edges. For booleans, the edges are selected if any connected
extruded edges are selected.
- Duplicate edges: Copied values of selected edges.
- Face: Averaged values of all faces connected to the selected edge.
For booleans, faces are selected if any connected original faces
are selected.
- Corner: Averaged values of corresponding corners in all faces
connected to selected edges. For booleans, corners are selected
if one of those corners are selected.
Face Mode
- Vertex: Copied values of extruded vertices.
- Connecting edges (vertical): Average values of connected selected
edges, not including the edges "on top" of extruded regions.
For booleans, edges are selected when any connected extruded edges
were selected.
- Duplicate edges: Copied values of extruded edges.
- Face: Copied values of the corresponding selected faces.
- Corner: Copied values of corresponding corners in selected faces.
Individual Face Mode
- Vertex: Copied values of extruded vertices.
- Connecting edges (vertical): Average values of the two neighboring
edges on each extruded face. For booleans, edges are selected
when at least one neighbor on the extruded face was selected.
- Duplicate edges: Copied values of extruded edges.
- Face: Copied values of the corresponding selected faces.
- Corner: Copied values of corresponding corners in selected faces.
**Differences from edit mode**
In face mode (non-individual), the behavior can be different than the
extrude tools in edit mode-- this node doesn't handle keeping the back-
faces around in the cases that the edit mode tools do. The planned
"Solidify" node will handle that use case instead. Keeping this node
simpler and faster is preferable at this point, especially because that
sort of "smart" behavior is not that predictable and makes less sense
in a procedural context.
In the future, an "Even Offset" option could be added to this node
hopefully fairly simply. For now it is left out in order to keep
the patch simpler.
**Implementation**
For the implementation, the `Mesh` data structure is used directly
rather than converting to `BMesh` and back like D12224. This optimizes
for large extrusion operations rather than many sequential extrusions.
While this is potentially more verbose, it has some important benefits:
First, there is no conversion to and from `BMesh`. The code only has
to fill arrays and it can do that all at once, making each component of
the algorithm much easier to optimize. It also makes the attribute
interpolation more explicit, and likely faster. Only limited topology
maps must be created in most cases.
While there are some necessary loops and allocations with the size of
the entire mesh, I tried to keep everything I could on the order of the
size of the selection rather than the size of the mesh. In that respect,
the individual faces mode is the best, since there is no topology
information necessary, and the amount of work just depends on the size
of the selection.
Modifying an existing mesh instead of generating a new one was a bit
of a toss-up, but has a few potential benefits:
- Avoids manually copying over attribute data for original elements.
- Avoids some overhead of creating a new mesh.
- Can potentially take advantage of future ammortized mesh growth.
This could be changed easily if it turns out to be the wrong choice.
Differential Revision: https://developer.blender.org/D13709
When moving to C++ field for initialization was removed.
Favor assignments to field names as it reads better and avoids bugs if
files are ever re-arranged as well as mistakes (see T94784).
Note that the generated optimized output is identical with GCC11.
This adds a selection field input to the node, faces that are selected and
meet the minimum vertex count threshold will be triangulated.
Differential Revision: https://developer.blender.org/D13804
Add a boolean option to have the Curve Handle Position input node return the
position of the handle relative to each point position.
Differential Revision: https://developer.blender.org/D12947
A large polygon in the file from the report caused `alloca`
to exceed the maximum stack size, causing a crash. Instead
of using `alloca`, use `blender::Array` with an inline buffer.
Based on a patch by Germano Cavalcante (@mano-wii).
Differential Revision: https://developer.blender.org/D13898
When enabled, it will keep contour around the object instead of hide them by rule of face mark,
so the object can always have full contour while filtering out some of the feature lines inside certain regions.
Reviewed By: Antonio Vazquez (antoniov), Aleš Jelovčan (frogstomp)
Differential Revision: https://developer.blender.org/D13847
Option to discard back faced triangles, this speeds up calculation especially for when you only want to show visible feature lines.
Reviewed By: Antonio Vazquez (antoniov), Aleš Jelovčan (frogstomp)
Differential Revision: https://developer.blender.org/D13848
Instead of splitting it at each occlusion change, it tolerates short segments of "zig-zag" occlusion incoherence and doesn't split the chain at these points, thus creating a much smoother result.
Reviewed By: Antonio Vazquez (antoniov), Aleš Jelovčan (frogstomp)
Differential Revision: https://developer.blender.org/D13851
This gives a modest speedup as calculating tessellation and face
normals at the same time can be more efficiently multi-threaded.
Also avoids calculating face normals twice,
oversight in d590e223da.
This commit improves NURBS knot generation by adding proper support
for the combination of the Bezier and cyclic options. In other cases
the resulting knot doesn't change. This cyclic Bezier knot is used to
create accurate accurate "Nurbs Circle", "Nurbs Cylinder" primitives.
"Nurbs Sphere" and "Nurbs Torus" primitives are also improved by
tweaking the spin operator.
The knot vector in 3rd order NURBS curve with Bezier option turned on
(without cyclic) is changed in comparison to previous calculations,
although it doesn't change the curve shape itself.
The accuracy of the of NURBS circle is fixed, which can be checked by
comparing with mesh circle. Tessellation spacing differences in
circular NURBS is also fixed, which is observable with the NURBS
cylinder and sphere primitives. These were causing seam-like effects.
This commit contains comments from Piotr Makal (@pmakal).
Differential Revision: https://developer.blender.org/D11664
Normal layers currently aren't stored in the undo step
mesh storage, since they are not stored in files at all.
However, the edit mesh expects normals to be fully
calculated, and does not keep track of a dirty state.
This patch updates the normals in the BMesh created
by loading an undo step.
Another option would be calculating the normals on
the undo mesh first, which might be better if Mesh
normal calculation is faster than BMesh calculation,
but the preferred method to access vertex normals fails
in this case, because the mesh runtime mutexes are not
initialized for undo-state meshes.
Differential Revision: https://developer.blender.org/D13859
From an error in rBcfa53e0fbeed, the vertex normals in `SculptSession`
seem to be used, but in the case when no "pbvh" is used, the value of
the pointer is never assigned.
Normals were not generally dirty before this "ensure" function with
regular sculpting operations, so this addition shouldn't have any cost.
Differential Revision: https://developer.blender.org/D13854
All other nodes with data type and domain choices have the domain
below the data type. Generally that order makes sense, because it's
consistent with nodes that have no domain drop-down.
Because this operator is used on original objects, it's best to tag
the normals dirty instead of explicitly calculating them, to avoid
unnecessarily storing normal layers on an original object (since
they might have to be recalculated during evaluation anyway).
There may be other places this change is helpful, but being
conservative is likely better for now.
Related to T95125
The new OBJ exporter did not handle object instances.
The fix is to use a dependency graph iterator, asking for instances.
Unfortunately that iterator makes a temporary copy of instance objects
that does not persist past the iteration, but we need to save all the
objects and meshes to write later, so the Object has to be copied now.
This changed some unit tests. Even though the tests don't have instancing,
the iterator also picks up some Text objects as Mesh ones (which is a good
thing), resulting in two more objects in the all_objects.obj file output.
With object collection properties open there was a huge delay when
switching active objects in a large scene, (~10k objects, ~5m vertices).
This is due to a non-optimal function to query all the collections the object is in.
To solve this the code can be simplified by using `bpy.types.Object.users_collection`
This returns all the collections the object is in removing the need to compute this in python.
The UI team requested adding woff2 support to freetype.
this required a new dependency brotli.
This changes adds brotili to the builder and bumps
freetype to version 2.11.0
As freetype now depends on other libraries, for consistency
all use of ${FREETYPE_LIBRARY} in cmake has been updated to
use ${FREETYPE_LIBRARIES} adjustments have been made in the
windows platform file, all other platforms use cmake's
FindFreeType.cmake which already sets this variable.
reviewed by: brecht
Differential Revision: https://developer.blender.org/D13448
This node can scale individual edges and faces. When multiple selected
faces/edges share the same vertices, they are scaled together.
The center and scaling factor is averaged in this case.
For some examples see D13757.
Differential Revision: https://developer.blender.org/D13757
Currently there is no way to flip normals in geometry nodes. This node
makes that possible by flipping the winding order of selected faces.
The node is purposely not called "Flip Normals", because normals are
derived data, changing them is only a side effect. The real change is
that the vertex and edge indices in the face corners of every selected
polygon are reversed, and face corner attribute data is reversed.
While there are existing utilities to flip a polygon and its custom
data, this node aims to process an attribute's data together instead
of processing all attributes separately for each index.
Differential Revision: https://developer.blender.org/D13809
Adds a second output to the Mesh Islands node that shows the total
number of islands as a field.
Differential Revision: https://developer.blender.org/D13700
This is not currently working, with an internal compiler error. However
we are currently using BVH2 instead of Metal RT. So this has no effect for
users, it's being committed to avoid the code getting outdated.
Ref T92573, T92212
Differential Revision: https://developer.blender.org/D13632
This shader needs to use the same interface as the OCIO shader. On Linux
and Windows this seems to be the case. On MacOS however there is a
mismatch that makes the overlay texture to be completely black when
switching to workbench in the Shader workspace.
This is just a temporarily work-around as this should be solved. Due to
the poor GPU debugging facilities on Mac we haven't been able to
pin-point the root cause.
Editing of generic attributes on the original objects in edit modes is
still very limited. However, when applying a geometry nodes modifier
that generates new attributes. These attributes will show up in the
Attributes panel.
Currently, our exporters are not capable of exporting generic attributes.
Therefore, for the time being, a work around is to apply geometry nodes
and then convert a generic attribute to a task specific attribute like a
uv map, vertex group or vertex color layer. Once more parts of Blender
support generic attributes, this will become less important.
Currently, only meshes are supported by the operator. However, it would
be relatively easy to extend it to other geometry types.
Differential Revision: https://developer.blender.org/D13838
Allow any non-modifier keyboard events to be used.
Note that the existing check for >= EVT_AKEY allowed NDOF and other
non-keyboard events (including modifiers, which didn't work).
- Use defines instead of magic numbers for F-Key & NDOF range checks.
- Use explicit values for NDOF event types.
- Minor clarification to doc-strings.
- Use doxy-sections.
There is probably a better solution that's possible, but the few other
things I tried didn't work, and the build error should be resolved for
the buildbots. This is similar to the "breaks" in the namespace for
functions declared in `ED_node.h`.
The code here was using velocity based interpolation copied from particles.
However there is no velocity cached in the rigid body point cache so the
results were non-sensical.
This adds a new curve primitive to generate arcs.
Radius mode (default): Generates a fixed radius arc on XY plane
with controls for Angle, Sweep and Invert.
Points mode: Generates a three point curve arc from Start to End
via Middle with an Angle Offset and option to invert the arc.
There are also outputs for arc center, radius and normal direction
relative to the Z-axis.
This patch is based on previous patches
D11713 and D13100 from @guitargeek. Thank you.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D13640
This fixes a similar issue as the previous commit, but this time the
continuous notifiers would be sent after redoing. E.g. after moving an
object, and then modifying the transform in the "Adjust Last Operation"
panel.
The thumbnail caching continuously sends `ND_SPACE_FILE_PREVIEW`
notifiers via a timer. But this timer was never ended properly after
thumbnails are fully loaded into the cache.
Wouldn't actually cause a refresh or redraw, send and process the
notifiers.
I already tried to avoid this for the asset view template, but
apparently that wasn't working correctly. For the File/Asset Browser I
never applied that fix to avoid possible regressions before the release.
This commit moves code in all node editor files to the
`blender::ed::space_node` namespace, except for C API
functions defined in `ED_node.h`, which can only be moved
once all areas calling them are moved to C++.
The change is fairly straightforward, I just moved a couple
of "ED_" code blocks around to make the namespace more
contiguous, and there's the method for adding a pointer to
a struct in a C++ namespace in DNA.
Differential Revision: https://developer.blender.org/D13871
This patch fixes a correctness issue discovered in the `int4 select(...)` function on Apple Silicon machines, which causes bad bvh2 builds. Although the generated bvh2s give correct renders, the resulting runtime performance is terrible. This fix allows us to switch over to bvh2 on Apple Silicon giving a significant performance uplift for many of the standard benchmarking assets. It also fixes some unit test failures stemming from the use of MetalRT, and trivially enables the new pointcloud primitive.
Ref T92212
Reviewed By: brecht
Maniphest Tasks: T92212
Differential Revision: https://developer.blender.org/D13877
Custom bones are drawn by instancing the GPUBatch of the base object. To
access the mesh and its GPUBatch, `BKE_object_get_evaluated_mesh` was
used. However, since GPU subdivision support, this will return a
subdivision wrapper which will never be drawn, and thus will have an
invalid batch, which caused the crash.
`BKE_object_get_evaluated_mesh_no_subsurf` should be used instead, to
return the mesh that will be drawn, and have the subdivision evaluated
on the GPU. Note that the rest of the draw code is already using this
function.
This adds vertex creasing support for OpenSubDiv for modeling, rendering,
Alembic and USD I/O.
For modeling, vertex creasing follows the edge creasing implementation with an
operator accessible through the Vertex menu in Edit Mode, and some parameter in
the properties panel. The option in the Subsurf and Multires to use edge
creasing also affects vertex creasing.
The vertex crease data is stored as a CustomData layer, unlike edge creases
which for now are stored in `MEdge`, but will in the future also be moved to
a `CustomData` layer. See comments for details on the difference in behavior
for the `CD_CREASE` layer between egdes and vertices.
For Cycles this adds sockets on the Mesh node to hold data about which vertices
are creased (one socket for the indices, one for the weigths).
Viewport rendering of vertex creasing reuses the same color scheme as for edges
and creased vertices are drawn bigger than uncreased vertices.
For Alembic and USD, vertex crease support follows the edge crease
implementation, they are always read, but only exported if a `Subsurf` modifier
is present on the Mesh.
Reviewed By: brecht, fclem, sergey, sybren, campbellbarton
Differential Revision: https://developer.blender.org/D10145
This brush fixes the random spikes that
occasionally happen in multires models.
These spikes can be nearly impossible to
fix manually and can make working with
multires a nightmare.
Since vertex and face normals are now stored on the mesh when necessary,
we can expose them as contiguous arrays of vectors in the Python API.
This can give render engines and other addons easy access to they data
for fast access through a regular collection property.
While "Mesh Vertex" still has a "normal" property in RNA, that is only
maintained in order to avoid breaking the existing API, and accessing
it is less efficient than accessing the normals directly.
I made the normal arrays read-only, because modifying them could
put them in an invalid state. This is inline with how we treat the data
internally, and helps keep relationships between data clear.
Differential Revision: https://developer.blender.org/D13839
When toggling to a File Browser from an Asset Browesr, the asset indexer
would be used to load files. I couldn't spot issues with that on a
quick look, but this should still be corrected.
Adds an "Asset Indexing" option (enabled by default) to Preferences >
Experimental > Debugging. This is useful when working on the asset
library loading.
An external CMake script can be used to debug CMake code, modify/read
target properties, inter-target dependencies, non-cache variables etc.
Reviewed by: LazyDodo, brecht
Differential Revision: https://developer.blender.org/D13830
This patch fixes crash T94736 on Metal in which the launch_params were not being updated to reflect destruction of MetalMem objects.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D13875
When copying strips between 2 scenes, it wasn't possible to copy
animation curves along with strips.
In this patch curves are copied into clipboard `ListBase`. When pasted,
original curves are moved into temporary `ListBase` and curves in
clipboard are moved into scene action. This is because when strips from
clipboard have to be renamed, function `SEQ_ensure_unique_name()` does
fix RNA paths of curves, but this is done globally for all curves within
action. After strips are renamed, restore original curves from backup.
Note: This patch handles only fcurves. Drivers and actions are currently
not handled anywhere in VSE.
Fixes T77530
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D13845
- Move functions that handle animation to own file - `animation.c`
- Refactor `SEQ_offset_animdata` and `SEQ_free_animdata` functions
- Add function `SEQ_fcurves_by_strip_get` to provide more granular
and explicit way for operators to handle animation
- Remove function `SEQ_dupe_animdata`, do curve duplication explicitly
in operator code, which makes more sense to do. Further this function
was also used for renaming strips which makes no sense.
- Refactor usage of function `SEQ_free_animdata` and remove XXX comment.
Now this functiuon is no longer called when `Sequence` data is freed
implicitly, it is done explicitly in high level function
`SEQ_edit_remove_flagged_sequences`
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D13852
The ustring is not a trivially copyable object from the C++ standard
point of view, so using memcpy on it is strictly wrong. In practice,
however, this is OK since it is just a thin wrapper around char*.
For now use explicit cast to void* same as it was done in other places
of ccl::array implementation. But also localize the place where memory
copy happens to make it easier to support proper non-trivial C++
objects in the future.
This merge the description into one struct only that can be more easily
copied during `finalize()`.
The in and out layout parameters are better named and extended with the
invocation count (with fallback support)
Route cause was data alignment mismatch between GPU and CPU. This
mismatch would not allow us to bind the UBO where data wasn't available
on the GPU.
Fixed by using float4 in stead of float2. This could eventually be
packed, but that would lead to less readable code.
Cause was incorrect logic when generating the resource layout. It the
explicit_location_support setting was ignored and the binding were
generated for image, uniform buffers and storage buffers.
- Add BM_mesh_debug_print & BM_mesh_debug_info.
- Report flags in Mesh.cd_flag in BKE_mesh_debug_print
- Move custom data printing into customdata.cc (noted as a TODO).
Note that the term "runtime" has been removed from
`BKE_mesh_runtime_debug_print` since these are useful for debugging any
kind of mesh data.
Code that handled merging & initializing custom-data from other
meshes sometimes missed checks for this flag, causing bevel weights to
lost when the mesh was converted to a BMesh.
The following changes are a more general fix for T94197.
- Add BM_mesh_copy_init_customdata_from_mesh_array which initializes
custom-data from multiple meshes at once.
As well as initializing custom-data layers from Mesh.cd_flag.
This isn't essential for boolean, however it avoids the overhead of
resizing custom-data layers.
- Loading mesh data into a BMesh now respects Mesh.cd_flag
instead of only checking if the BMesh custom-data-layer exists.
Without this, the order of meshes passed to BM_mesh_bm_from_me could
give different (incorrect) results.
- Copying mesh data now copies `cd_flag` too. This is a precaution
as in my tests evaluating modifiers these values always matched.
Nevertheless it's correct to copy this value as custom-data it's
self is being copied.
The buffer passed as an argument to `GPUFrameBuffer.read_color` is used
in the return of the function and therefore, if not used, its refcount is
decremented.
So be sure to increment the refcount of the already existing objects that
will be used in the return of a function.
This was the case for multi input sockets that have a link already.
Since we have multi input sockets, the way we use `socket_is_available`
is not really giving the expected result on these.
When used for input sockets the intention is to find a free socket
(either for noodle **replacement**, then it is always available, or just
the next free available socket).
Now I would think without the intention to replace an existing link, a
multi input socket should still be available.
From the inside of the function, the `replace` argument turns [namewise]
to `allow_used`, which sounds a little different (so one might argue
that if `allow_used` is `False` this should also trigger for already
connected multi input sockets).
In the end, this is an issue with the variable naming though, cant think
of a usecase where the patch change would really go against intentions.
Maniphest Tasks: T93413
Differential Revision: https://developer.blender.org/D13866
Bug possibly introduced in {rBc57e4418bb85aec8bd3615fd775b990badb43d30}.
Interestingly, the orientation set before (NORMAL), even different from
the orientation that was actually used, was allowing the use of
"orient_matrix" ("orient_matrix_type" should have been NORMAL in that
case too).
In any case, make sure the "orient_matrix_type" and "orient_type" are the
same so that the "orient_matrix" is used.
These operations (sorting and selecting all nodes) should generally
be handled by the node editor and not outside code. They were not
called outside of the node editor, so they can be moved to the editor's
`intern` header.
This file was added nine years ago, and was unused then.
Now with active tools we use a different approach to create
toolbars, so the file is not relevant.
This node allows accessing data of other elements in the context geometry.
It is similar to the Transfer Attribute node in Index mode. The main difference
is that this node does not require a geometry input, because the context
is used.
The node can e.g. be used to generalize what the Edge Vertices node is doing.
Instead of only being able to get the position of the vertices of an edge,
any field/attribute can be accessed on the vertices.
Differential Revision: https://developer.blender.org/D13825
Adds a second output to the edge angle node that shows the signed angle
between the two faces, where Convex angles are positive and Concave angles
are negative. This calculation is slower than the unsigned angle, so it
was best to leave both for times where the unsigned angle will suffice.
Differential Revision: https://developer.blender.org/D13796
It's now easier than before to do the interpolation of attributes
only for the elements that are actually used in some cases.
This can result in a speedup because unnecessary computations
can be avoided. See the patch for a simple performance test.
Differential Revision: https://developer.blender.org/D13828
Cause of the issue isn't that clear, but the NVIDIA GLSL compiler
complained that it couldn't find an overloaded function when the second
parameter is an interger. This change fixes it by using a float.
Display exact integer values of a floating point fields without
a fraction if the step is also an exact integer. This is intended
for cases when the value can technically be fractional, but most
commonly is supposed to be integer.
This handling is not applied if the field has any unit except frames,
because integer values aren't special for quantities like length.
The fraction is discarded in the normal display mode and when copying
the value to clipboard, but not when editing to remind the user that
the field allows fractions.
Differential Revision: https://developer.blender.org/D13753
Fix a precision issue when stepping down from 1 to 0 via the left
decrement button and step 100 results in a small nonzero value.
The reason is that 0.01 can't be precisely represented in binary
and converting to double before multiplication reveals this.
Ref D13753
This patch converts GPU_SHADER_2D_IMAGE_MULTI_RECT_COLOR shader to use
the GPUShaderCreateInfo pattern. It can be used as a reference when
converting other shaders.
In this special case the flat uniform vector cannot be used anymore as it
doesn't fit as push constants. To solve this a uniform buffer is used.
The previous optimization did not work in general yet, unfortunately.
This change makes the code more correct, but also brings back
some unnecessary updates (e.g. when creating a node group).
For boolean operations only one of the meshes was checked to determine
if bevel weights should be created.
Now initialize custom data from both meshes flag.
Note that this is a localized fix to be back-ported, further changes
will be made so edit-mode conversion accounts for this
without the caller needing explicit checks for custom-data flags.
Asset indexing was disabled as ID property indexing wasn't supported.
Now that ID property support is added we can enable asset indexing.
Check {T91406} for more information about asset indexing.
Object/collection asset workflow would need the bounding box for snapping.
The bounding box is stored using ID properties in the scene. Currently ID properties
aren't stored in the asset index, what would break object snapping. For this reason
Asset Indexing is turned off in mater. This patch will introduce the indexing of ID
properties what will allow the indexing to be turned on again.
## Data Mapping ##
For data mapping we store the internal structure of IDProperty to the indexer (including meta-data) to be able to deserialize it back.
```
[
{
"name": ..,
"value": ..,
"type": ..,
/* `subtype` and `length` are only available for IDP_ARRAYs. */
"subtype": ..,
},
]
```
| **DNA** | **Serialize type** | **Note** |
| IDProperty.name | StringValue| |
| IDProperty.type | StringValue| "IDP_STRING", "IDP_INT", "IDP_FLOAT", "IDP_ARRAY", "IDP_GROUP", "IDP_DOUBLE"|
| IDProperty.subtype | StringValue| "IDP_INT", "IDP_FLOAT", "IDP_GROUP", "IDP_DOUBLE" |
| IDProperty.value | StringValue | When type is IDP_STRING |
| IDProperty.value | IntValue | When type is IDP_INT |
| IDProperty.value | DoubleValue | When type is IDP_FLOAT/IDP_DOUBLE |
| IDProperty.value | ArrayValue | When type is IDP_GROUP. Recursively uses the same structure as described in this section. |
| IDProperty.value | ArrayValue | When type is IDP_ARRAY. Each element holds a single element as described in this section. |
NOTE: IDP_ID and IDP_IDARRAY aren't supported. The entry will not be added.
Example
```
[
{
"name": "MyIntValue,
"type": "IDP_INT",
"value": 6,
},
{
"name": "myComplexArray",
"type": "IDP_ARRAY",
"subtype": "IDP_GROUP",
"value": [
[
{
"name": ..
....
}
]
]
}
]
```
## Considered alternatives ##
- Add conversion functions inside `asset_indexer`; makes generic code part of a specific solution.
- Add conversion functions inside `BLI_serialize`; would add data transformation responsibilities inside a unit that is currently only responsible for formatting.
- Use direct mapping between IDP properties and Values; leads to missing information and edge cases (empty primitive arrays) that could not be de-serialized.
Reviewed By: Severin, mont29, HooglyBoogly
Maniphest Tasks: T92306
Differential Revision: https://developer.blender.org/D12990
Motion paths themselves aren't getting saved (not sure if they are
without overrides), but being able to override options makes them
usable even if it's necessary to regenerate every edit session.
Differential Revision: https://developer.blender.org/D13842
Some new obj exporter tests were disabled because the normals were different
in the last decimal place on different platforms.
The old python exporter deduped normals with their coordinates rounded to
four decimal places. This change does the same in the new exporter.
On one test, this produced a file 25% smaller and even ran 10% faster.
This can simplify iterating through all of the indices in the vector,
which is fairly common, since one of the benefits of the data structure
is that all values are contiguous.
This node's UI uses a multi-select enum to allow adjusting the
type of both handle sides with the same node. Since usually the
user wants to affect both handles, and it's the multi-select behavior
isn't obvious, selecting both by default is an improvement.
This significantly reduces discontinuities on UV seams, by giving a better
match of the texture filtered colors on both sides of the seam. It works by
using pixels from adjacent faces across the UV seam.
This new option is called "Adjacent Faces" and is the default. The old option
is called "Extend", and extends border pixels outwards.
Differential Revision: https://developer.blender.org/D13303
Use GPU-side scaling to speed up the scaling itself, and to avoid having
to copy the image buffer using the CPU. Mipmapping is used to get decent
filtering when downscaling without ugly artifacts.
In my comparisons, there was barely any difference between the methods
for DPIs >= 1. Below that, the result looks a bit different due to the
different filtering method.
See D13144 for screen-recordings showing the difference.
Part of T92922.
Differential Revision: https://developer.blender.org/D13144
Reviewed by: Jeroen Bakker
Typo in rB605cdc4346e5f82, both `eBlendfileLinkAppendForeachItemFlag`
flags had the same value, effectively preventing to filter out direct
vs. indirect appended items.
Override layers are a standard feature of Alembic, where archives can override
data from other archives, provided that the hierarchies match.
This is useful for modifying a UV map, updating an animation, or even creating
some sort of LOD system where low resolution meshes are swapped by high resolution
versions.
It is possible to add UV maps and vertex colors using this system, however, they
will only appear in the spreadsheet editor when viewing evaluated data, as the UV
map and Vertex color UI only show data present on the original mesh.
Implementation wise, this adds a `CacheFileLayer` data structure to the `CacheFile`
DNA, as well as some operators and UI to present and manage the layers. For both
the Alembic importer and the Cycles procedural, the main change is creating an
archive from a list of filepaths, instead of a single one.
After importing the base file through the regular import operator, layers can be added
to or removed from the `CacheFile` via the UI list under the `Override Layers` panel
located in the Mesh Sequence Cache modifier. Layers can also be moved around or
hidden.
See differential page for tests files and demos.
Reviewed by: brecht, sybren
Differential Revision: https://developer.blender.org/D13603
This is a first part of the Shader Create Info system could be.
A shader create info provides a way to define shader structure, resources
and interfaces. This makes for a quick way to provide backend agnostic
binding informations while also making shader variations easy to declare.
- Clear source input (only one file). Cleans up the GPU api since we can create a
shader from one descriptor
- Resources and interfaces are generated by the backend (much simpler than parsing).
- Bindings are explicit from position in the array.
- GPUShaderInterface becomes a trivial translation of enums and string copy.
- No external dependency to third party lib.
- Cleaner code, less fragmentation of resources in several libs.
- Easy to modify / extend at runtime.
- no parser involve, very easy to code.
- Does not hold any data, can be static and kept on disc.
- Could hold precompiled bytecode for static shaders.
This also includes a new global dependency system.
GLSL shaders can include other sources by using #pragma BLENDER_REQUIRE(...).
This patch already migrated several builtin shaders. Other shaders should be migrated
one at a time, and could be done inside master.
There is a new compile directive `WITH_GPU_SHADER_BUILDER` this is an optional
directive for linting shaders to increase turn around time.
What is remaining:
- pyGPU API {T94975}
- Migration of other shaders. This could be a community effort.
Reviewed By: jbakker
Maniphest Tasks: T94975
Differential Revision: https://developer.blender.org/D13360
For an upcoming refactoring of library remapping we want to be able to test if the logic won't change.
It also increased my experience inside the remapping codebase and find out what exactly needed to
be refactored.
This patch adds test cases for the core functionality of `foreach_libblock_remap_callback`. The test cases
don't cover of all the branches. Also pre-, post-processing, referencing and proxies are not tested.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D13815
Allows conveniently selecting an inverse of a collection.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D13846
This patch improves conversion method from NURBS to Bezier curves,
resulting in exact shape between those two types when provided with
a 3rd degree NURBS curve. Part of T86086.
See the differential revision for more comparisons.
The node still cannot account properly for a NURBS "order" other
than 4 and it does not take into account control point weights.
Differential Revision: https://developer.blender.org/D13546
Fix the description for WORKSPACE_OT_reorder_to_back to say "last" in
list rather than "first"
See D13696 for more details.
Differential Revision: https://developer.blender.org/D13696
Reviewed by Aaron Carlisle
The crash is due to the fact that GPU subdivision extraction routines
for edit data (including UVs) only worked for BMesh. However, a Mesh
based version is still needed for texture painting. This adds the
missing components. This also ensures all data are properly initialized
(at least the ones revealed by the bug).
This puts the loop over the final subdivision quads outside of the mesh
iteration callback. This can also allow for easier parallel execution in
the future if need be.
Since the option to enable linkers are booleans,
it's possible to enable them all at once.
Now only the first enabled + available linker is used
(with priority given to link is with better performance).
Set the linker using CMAKE_*_LINKER_FLAGS instead of {C/CXX}FLAGS.
There is no advantage in using the CFLAGS to set the linker, it has the
downside of triggering a full rebuild when changing the linker.
Tested building Blender and the bpy.so Python module.
Ref D13833
Reviewed by: sergey, brecht
Conceptually, this is the geometry that data is taken from,
not the target of an operation, so rename it from "Target"
to "Source". This was common user feedback and agreed
on in a recent sub-module meeting.
Before rB644e6c7a3e99ae1d43ed, `fill` was used in the error
cases, but now `fill_indices` is used, which doesn't work when
the span is empty (when only one output is used). The fix is just
to check for that case.
The search list only displayed the "Result" output socket in this
case, which is unexpected since dragging from an input gives the
operations in the list as well. Also use integer mode when
connecting to boolean sockets.
I noticed these when doing final cleanup on rBcfa53e0fbeed.
One use was removed in that commit, the others were unused
going further back a few years.
Differential Revision: https://developer.blender.org/D13834
`TreeElement` isn't a trivial type anymore, so `MEM_delete()` should be
called, which calls the destructor.
AFAICS this would cause a memory leak, since the contained `unique_ptr`
is allocated but not destructed correctly - but it's not using the
guarded allocator so woudn't be reported.
Smart pointers should be the default choice for C++ owning pointers,
since they let you manage memory using RAII.
Also moved type factory methods into static class functions.
Basically this removes any C <-> C++ glue code. C++ types are accessed
directly via the public C++ APIs.
Contains some related changes like, moving functions that were
previously declared in a now removed header to a different file, whose
header is the more appropriate place (and the source file as well).
But generally I tried to avoid other changes.
The switch to how normals are kept has led to tiny differences in
the normal output values on different platforms. Disabling the failing
tests while working on a solution to this problem.
Part of a5cb7c1e62 is reverted since it
created unknown pragma warning on windows.
Use a trick to do self-assigning.
Reviewed by Jacques Lucke in chat.
`BKE_layer_collection_sync` was missing a specific handling for one of
those pre-master collection cases,
NOTE: It is a bit unfortunate to have to do 'do-version' code in BKE...
At some point might look into moving this into actual `do_version` file,
but this is not fully trivial not critical improvement for now.
Caused by rBa5c59fb90ef9.
Since Group Input and Output sockets happen to be of type `SOCK_CUSTOM`
[and since rBa5c59fb90ef9 custom py defined sockets are too :)] a check
introduced in rB513066e8ad6f that prevents connections for `SOCK_CUSTOM`
triggered.
Now refine the check, so it specifically looks for NODE_GROUP_INPUT /
NODE_GROUP_OUTPUT, too (this keeps the intention intact to not connect
group inputs to group outputs and vice versa, but allows custom py
defined sockets to connect again) and put it in new utility function.
Maniphest Tasks: T94827
Differential Revision: https://developer.blender.org/D13817
Blender.xcodeproj User-supplied CFBundleIdentifier value
'org.blenderfoundation.blender' in the Info.plist must be the same as
the PRODUCT_BUNDLE_IDENTIFIER build setting value ''.
Reviewed By: #platform_macos, brecht
Differential Revision: https://developer.blender.org/D13826
Didn't remove the key-value pair since old Xcode behavior is not
known.
warning: LSMinimumSystemVersion of '10.9.0' is less than the value of
MACOSX_DEPLOYMENT_TARGET '10.13' - setting to '10.13'. (in target
'blender' from project 'Blender')
Reviewed By: #platform_macos, brecht
Differential Revision: https://developer.blender.org/D13831
Fix assignment warning
source/blender/blenlib/tests/BLI_any_test.cc:56:5: warning: explicitly
assigning value of variable of type 'blender::Any<void, 8, 8>'
to itself [-Wself-assign-overloaded]
c = c;
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D13835
2-point-curves are treated separately from 3plus-point-curves (assume a
lot of the twisting reduction can be skipped, so there is a dedicated
function for single segment curves).
And while using the 3plus-point-curves function [`make_bevel_list_3D`]
would actually work in this case, the dedicated function
`make_bevel_list_segment_3D` would only consider the tilt of the second
point and would just copy over the quat to the first point as well. Dont
see a reason for this, now consider the first point's tilt as well.
Maniphest Tasks: T94837
Differential Revision: https://developer.blender.org/D13813
Can give considerably faster linking, especially on system with many
cores.
The mold linker recently reached 1.0, see:
https://github.com/rui314/mold
The current stable release of GCC can't use this linker via
-fuse-ld=mold, so this patch uses the "-B" argument to add a binary
directory containing an alternate "ld" command that points to
"mold" (which is part of the default mold installation).
Some timing tests for linking full builds for AMD TR 3970X:
- BFD: 20.78 seconds.
- LLD: 12.16 seconds.
- GOLD: 7.21 seconds.
- MOLD: 2.53 seconds.
Ref D13807
Reviewed by: sergey, brecht
The mask is only used if it's not zero. Adding the normal mask made
it not zero, but it didn't include anything else, so all custom data
layers except normals were removed. The fix is to only add normals
to the mask when it should be used.
As described in T91186, this commit moves mesh vertex normals into a
contiguous array of float vectors in a custom data layer, how face
normals are currently stored.
The main interface is documented in `BKE_mesh.h`. Vertex and face
normals are now calculated on-demand and cached, retrieved with an
"ensure" function. Since the logical state of a mesh is now "has
normals when necessary", they can be retrieved from a `const` mesh.
The goal is to use on-demand calculation for all derived data, but
leave room for eager calculation for performance purposes (modifier
evaluation is threaded, but viewport data generation is not).
**Benefits**
This moves us closer to a SoA approach rather than the current AoS
paradigm. Accessing a contiguous `float3` is much more efficient than
retrieving data from a larger struct. The memory requirements for
accessing only normals or vertex locations are smaller, and at the
cost of more memory usage for just normals, they now don't have to
be converted between float and short, which also simplifies code
In the future, the remaining items can be removed from `MVert`,
leaving only `float3`, which has similar benefits (see T93602).
Removing the combination of derived and original data makes it
conceptually simpler to only calculate normals when necessary.
This is especially important now that we have more opportunities
for temporary meshes in geometry nodes.
**Performance**
In addition to the theoretical future performance improvements by
making `MVert == float3`, I've done some basic performance testing
on this patch directly. The data is fairly rough, but it gives an idea
about where things stand generally.
- Mesh line primitive 4m Verts: 1.16x faster (36 -> 31 ms),
showing that accessing just `MVert` is now more efficient.
- Spring Splash Screen: 1.03-1.06 -> 1.06-1.11 FPS, a very slight
change that at least shows there is no regression.
- Sprite Fright Snail Smoosh: 3.30-3.40 -> 3.42-3.50 FPS, a small
but observable speedup.
- Set Position Node with Scaled Normal: 1.36x faster (53 -> 39 ms),
shows that using normals in geometry nodes is faster.
- Normal Calculation 1.6m Vert Cube: 1.19x faster (25 -> 21 ms),
shows that calculating normals is slightly faster now.
- File Size of 1.6m Vert Cube: 1.03x smaller (214.7 -> 208.4 MB),
Normals are not saved in files, which can help with large meshes.
As for memory usage, it may be slightly more in some cases, but
I didn't observe any difference in the production files I tested.
**Tests**
Some modifiers and cycles test results need to be updated with this
commit, for two reasons:
- The subdivision surface modifier is not responsible for calculating
normals anymore. In master, the modifier creates different normals
than the result of the `Mesh` normal calculation, so this is a bug
fix.
- There are small differences in the results of some modifiers that
use normals because they are not converted to and from `short`
anymore.
**Future improvements**
- Remove `ModifierTypeInfo::dependsOnNormals`. Code in each modifier
already retrieves normals if they are needed anyway.
- Copy normals as part of a better CoW system for attributes.
- Make more areas use lazy instead of eager normal calculation.
- Remove `BKE_mesh_normals_tag_dirty` in more places since that is
now the default state of a new mesh.
- Possibly apply a similar change to derived face corner normals.
Differential Revision: https://developer.blender.org/D12770
Some of the message-bus macros are not safe to use in C++. This has come
up before, but no good solution was found. Now @LazyDodo, @HooglyBoogly
and I concluded this is the best duct tape "solution" for the moment.
The message-bus API should address this.
Today many users seem to think the output from
this node is a single curve with multiple splines.
This patch renames the geometry output socket
from "Curves" to "Curve Instances" to avoid confusion.
Differential Revision: https://developer.blender.org/D13693
We want to refactor quite some of the Outliner code using C++, this is a
logical step to help the transition to a new architecture.
Includes plenty of fixes to make this compile without warnings, trying
not to change logic. The usual stuff (casts from `void *`, designated
initializers, compound literals, etc.).
There were a couple of function name collisions which were caused
by sharing code with the mask modifier. I just removed the dependence
on the mask modifier now. The code that I duplicated for that purpose
is only in a legacy node, so it can be expected to be removed soonish.
And change install_deps.sh to build shared (instead of static) FFMPEG
libraries, for consistency with other library dependencies and to simplify
the logic. This may require users of install_deps.sh to rebuild FFMPEG.
This is the last step that lets us get rid of LIBPATH variables and
link_directories() entirely, as recommended by the CMake docs.
Some fixes were needed in the find FFMPEG module to make it actually work,
this code was unused up to now.
Followup to D8855.
Differential Revision: https://developer.blender.org/D9177
The fundamental limitation is that we can only have one instance
("dupli") generator at a time. Because the mesh output of a curve
object is output as an instances, the geometry set instances existed,
replacing the object as font instances. The "fix" is to reverse the
order. The behavior won't be perfect still, but at least the old
behavior will be preserved, which is really what matters for a
feature like this.
One way to take this change further would be completely disabling
regular geometry evaluation while this option is active. However,
it doesn't seem like that would actually improve the state of the code.
Differential Revision: https://developer.blender.org/D13768
When drawing windows on monitors that differ in DPI, we can sometimes
have UI elements draw at an incorrect scale. This patch just ensures
that `wm_window_make_drawable` always updates DPI.
See D10483 for more details.
Differential Revision: https://developer.blender.org/D10483
Reviewed by Brecht Van Lommel
Allow area Split to be initiated in any area and give better feedback
when not allowed.
See D13599 for more details and usage examples.
Differential Revision: https://developer.blender.org/D13599
Reviewed by Campbell Barton
And change install_deps.sh to build shared (instead of static) FFMPEG
libraries, for consistency with other library dependencies and to simplify
the logic. This may require users of install_deps.sh to rebuild FFMPEG.
This is the last step that lets us get rid of LIBPATH variables and
link_directories() entirely, as recommended by the CMake docs.
Some fixes were needed in the find FFMPEG module to make it actually work,
this code was unused up to now.
Followup to D8855.
Differential Revision: https://developer.blender.org/D9177
This is my attempt of adding defaults for the space clip editor struct
(in line with https://developer.blender.org/T80164).
It adds the default allocation for `SpaceClip` and
`node_composite_movieclip.cc`. This also solves the error below (for
C++ files using the DNA_default_alloc), which was put forward by
Sergey Sharybin.
Differential Revision: https://developer.blender.org/D13367
Reviewed by: Julian Eisel
While theorically fairly generic, current code is only enabled for
bledfile and liboverride views, and only used to display messages from
library IDs.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D13766
SVG files contained specific detailed pathnames on developers'
computers. These included full local user profile and path and should
not be in the release.
This patches corrects those lines. It also removes unused gradients from
the private icons SVG.
Differential Revision: https://developer.blender.org/D13344
Reviewed by: Yevgeny Makarov, Julian Eisel
This adds wrapper classes that make it easier to use GPU objects in C++.
####Motivations:####
- Easier handling of GPU objects.
- EEVEE rewrite already makes use of similar wrappers.
- There is the ongoing effort to use more C++ in the codebase
and lans to port more engines to it.
- The shader code refactor will make use of many UBOs with shared
struct declaration. This helps managing them.
- Safer handling of `TextureFromPool` which can't be bound as normal
texture (only texture ref) and can be better tracked in the future.
####Considerations:####
- I chose the `blender::draw` namespace because `blender::gpu` already has private classes (i.e: `gpu::Texture`).
- Theses are wrappers that manage a GPU object internally. They might be confused with actual `Texture`. However, the name `TextureWrapper` is a bit too much verbose in my opinion. I'm open to suggestion about better name.
Reviewed By: jbakker
Differential Revision: http://developer.blender.org/D13805
This patch implements the vector types (i.e:`float2`) by making heavy
usage of templating. All vector functions are now outside of the vector
classes (inside the `blender::math` namespace) and are not vector size
dependent for the most part.
In the ongoing effort to make shaders less GL centric, we are aiming
to share more code between GLSL and C++ to avoid code duplication.
####Motivations:
- We are aiming to share UBO and SSBO structures between GLSL and C++.
This means we will use many of the existing vector types and others
we currently don't have (uintX, intX). All these variations were
asking for many more code duplication.
- Deduplicate existing code which is duplicated for each vector size.
- We also want to share small functions. Which means that vector
functions should be static and not in the class namespace.
- Reduce friction to use these types in new projects due to their
incompleteness.
- The current state of the `BLI_(float|double|mpq)(2|3|4).hh` is a
bit of a let down. Most clases are incomplete, out of sync with each
others with different codestyles, and some functions that should be
static are not (i.e: `float3::reflect()`).
####Upsides:
- Still support `.x, .y, .z, .w` for readability.
- Compact, readable and easilly extendable.
- All of the vector functions are available for all the vectors types
and can be restricted to certain types. Also template specialization
let us define exception for special class (like mpq).
- With optimization ON, the compiler unroll the loops and performance
is the same.
####Downsides:
- Might impact debugability. Though I would arge that the bugs are
rarelly caused by the vector class itself (since the operations are
quite trivial) but by the type conversions.
- Might impact compile time. I did not saw a significant impact since
the usage is not really widespread.
- Functions needs to be rewritten to support arbitrary vector length.
For instance, one can't call `len_squared_v3v3` in
`math::length_squared()` and call it a day.
- Type cast does not work with the template version of the `math::`
vector functions. Meaning you need to manually cast `float *` and
`(float *)[3]` to `float3` for the function calls.
i.e: `math::distance_squared(float3(nearest.co), positions[i]);`
- Some parts might loose in readability:
`float3::dot(v1.normalized(), v2.normalized())`
becoming
`math::dot(math::normalize(v1), math::normalize(v2))`
But I propose, when appropriate, to use
`using namespace blender::math;` on function local or file scope to
increase readability.
`dot(normalize(v1), normalize(v2))`
####Consideration:
- Include back `.length()` method. It is quite handy and is more C++
oriented.
- I considered the GLM library as a candidate for replacement. It felt
like too much for what we need and would be difficult to extend / modify
to our needs.
- I used Macros to reduce code in operators declaration and potential
copy paste bugs. This could reduce debugability and could be reverted.
- This touches `delaunay_2d.cc` and the intersection code. I would like
to know @howardt opinion on the matter.
- The `noexcept` on the copy constructor of `mpq(2|3)` is being removed.
But according to @JacquesLucke it is not a real problem for now.
I would like to give a huge thanks to @JacquesLucke who helped during this
and pushed me to reduce the duplication further.
Reviewed By: brecht, sergey, JacquesLucke
Differential Revision: https://developer.blender.org/D13791
This patch implements the vector types (i.e:`float2`) by making heavy
usage of templating. All vector functions are now outside of the vector
classes (inside the `blender::math` namespace) and are not vector size
dependent for the most part.
In the ongoing effort to make shaders less GL centric, we are aiming
to share more code between GLSL and C++ to avoid code duplication.
####Motivations:
- We are aiming to share UBO and SSBO structures between GLSL and C++.
This means we will use many of the existing vector types and others
we currently don't have (uintX, intX). All these variations were
asking for many more code duplication.
- Deduplicate existing code which is duplicated for each vector size.
- We also want to share small functions. Which means that vector
functions should be static and not in the class namespace.
- Reduce friction to use these types in new projects due to their
incompleteness.
- The current state of the `BLI_(float|double|mpq)(2|3|4).hh` is a
bit of a let down. Most clases are incomplete, out of sync with each
others with different codestyles, and some functions that should be
static are not (i.e: `float3::reflect()`).
####Upsides:
- Still support `.x, .y, .z, .w` for readability.
- Compact, readable and easilly extendable.
- All of the vector functions are available for all the vectors types
and can be restricted to certain types. Also template specialization
let us define exception for special class (like mpq).
- With optimization ON, the compiler unroll the loops and performance
is the same.
####Downsides:
- Might impact debugability. Though I would arge that the bugs are
rarelly caused by the vector class itself (since the operations are
quite trivial) but by the type conversions.
- Might impact compile time. I did not saw a significant impact since
the usage is not really widespread.
- Functions needs to be rewritten to support arbitrary vector length.
For instance, one can't call `len_squared_v3v3` in
`math::length_squared()` and call it a day.
- Type cast does not work with the template version of the `math::`
vector functions. Meaning you need to manually cast `float *` and
`(float *)[3]` to `float3` for the function calls.
i.e: `math::distance_squared(float3(nearest.co), positions[i]);`
- Some parts might loose in readability:
`float3::dot(v1.normalized(), v2.normalized())`
becoming
`math::dot(math::normalize(v1), math::normalize(v2))`
But I propose, when appropriate, to use
`using namespace blender::math;` on function local or file scope to
increase readability.
`dot(normalize(v1), normalize(v2))`
####Consideration:
- Include back `.length()` method. It is quite handy and is more C++
oriented.
- I considered the GLM library as a candidate for replacement. It felt
like too much for what we need and would be difficult to extend / modify
to our needs.
- I used Macros to reduce code in operators declaration and potential
copy paste bugs. This could reduce debugability and could be reverted.
- This touches `delaunay_2d.cc` and the intersection code. I would like
to know @howardt opinion on the matter.
- The `noexcept` on the copy constructor of `mpq(2|3)` is being removed.
But according to @JacquesLucke it is not a real problem for now.
I would like to give a huge thanks to @JacquesLucke who helped during this
and pushed me to reduce the duplication further.
Reviewed By: brecht, sergey, JacquesLucke
Differential Revision: https://developer.blender.org/D13791
Fixes issue T94603
It adds a new compositor node called Scene Time which is already present as a geo node, having the same basic nodes available in all node trees is a nice thing to have.
Renames "Time" node to "Time Curve", this is done to avoid confusion between the Time node and the Scene Time node.
Reviewed By: jbakker
Maniphest Tasks: T94603
Differential Revision: https://developer.blender.org/D13762
This patch implements the vector types (i.e:float2) by making heavy
usage of templating. All vector functions are now outside of the vector
classes (inside the blender::math namespace) and are not vector size
dependent for the most part.
In the ongoing effort to make shaders less GL centric, we are aiming
to share more code between GLSL and C++ to avoid code duplication.
Motivations:
- We are aiming to share UBO and SSBO structures between GLSL and C++.
This means we will use many of the existing vector types and others we
currently don't have (uintX, intX). All these variations were asking
for many more code duplication.
- Deduplicate existing code which is duplicated for each vector size.
- We also want to share small functions. Which means that vector functions
should be static and not in the class namespace.
- Reduce friction to use these types in new projects due to their
incompleteness.
- The current state of the BLI_(float|double|mpq)(2|3|4).hh is a bit of a
let down. Most clases are incomplete, out of sync with each others with
different codestyles, and some functions that should be static are not
(i.e: float3::reflect()).
Upsides:
- Still support .x, .y, .z, .w for readability.
- Compact, readable and easilly extendable.
- All of the vector functions are available for all the vectors types and
can be restricted to certain types. Also template specialization let us
define exception for special class (like mpq).
- With optimization ON, the compiler unroll the loops and performance is
the same.
Downsides:
- Might impact debugability. Though I would arge that the bugs are rarelly
caused by the vector class itself (since the operations are quite trivial)
but by the type conversions.
- Might impact compile time. I did not saw a significant impact since the
usage is not really widespread.
- Functions needs to be rewritten to support arbitrary vector length. For
instance, one can't call len_squared_v3v3 in math::length_squared() and
call it a day.
- Type cast does not work with the template version of the math:: vector
functions. Meaning you need to manually cast float * and (float *)[3] to
float3 for the function calls.
i.e: math::distance_squared(float3(nearest.co), positions[i]);
- Some parts might loose in readability:
float3::dot(v1.normalized(), v2.normalized())
becoming
math::dot(math::normalize(v1), math::normalize(v2))
But I propose, when appropriate, to use
using namespace blender::math; on function local or file scope to
increase readability. dot(normalize(v1), normalize(v2))
Consideration:
- Include back .length() method. It is quite handy and is more C++
oriented.
- I considered the GLM library as a candidate for replacement.
It felt like too much for what we need and would be difficult to
extend / modify to our needs.
- I used Macros to reduce code in operators declaration and potential
copy paste bugs. This could reduce debugability and could be reverted.
- This touches delaunay_2d.cc and the intersection code. I would like to
know @Howard Trickey (howardt) opinion on the matter.
- The noexcept on the copy constructor of mpq(2|3) is being removed.
But according to @Jacques Lucke (JacquesLucke) it is not a real problem
for now.
I would like to give a huge thanks to @Jacques Lucke (JacquesLucke) who
helped during this and pushed me to reduce the duplication further.
Reviewed By: brecht, sergey, JacquesLucke
Differential Revision: http://developer.blender.org/D13791
The issue was caused by rBd09b1d2759861aa012ab2e7e4ce2ffa2.
Since this commit, the image users in gpu materials were updated
during depsgraph evaluation as well. However, there was a race
condition when one thread is deleting gpu materials in `BKE_material_eval`
while another thread is updating the image users at the same time.
The solution is to make sure that deleting gpu materials is done before
iterating over all gpu materials, by adding a new depsgraph relation.
The main issue was the use of `G_MAIN` during file load.
This patch refactors the code so that iterating over `G_MAIN`
is not necessary anymore. See D13800 for more details.
Differential Revision: https://developer.blender.org/D13800
The issue was caused by Cycles display driver not being able to restore
window's OpenGL context after disposing Cycles-side OpenGL context.
This is due to the window OpenGL re-activation needing to access window
manager which gets cleared out form global main during file reading.
Defer clearing window manager from the global main to until after all
screens are "exited". This allows Cycles to properly stop rendering,
dispose its OpenGL context, and restore window's drawable context.
It is unclear why it was required to clear window manager list early
on. Guess is that it comes from an original code in a1c8543f2a where
there was an early return which then got replaced with an actual logic
without changing the order of de-initialization and window manager list
clear.
Differential Revision: https://developer.blender.org/D13799
The direct cause of the bug in question was passing in the raw memory
buffer to sscanf. It should be called with a null-terminated buffer;
which isn't guaranteed when blindly trusting the file data.
When attempting to fuzz this code path, a variety of other crashes were
discovered and fixed.
Differential Revision: https://developer.blender.org/D11952
Remove code that very slightly darkened line on bottom of timeline, when
backdrop is enabled. Purpose of the code wasn't dodumented, and 2.79
doesn't seem to produce this darkened line.
Rename drawing functions to appropriate names.
Add maximum string length argument to UI_fontstyle_draw to reduce usage
of BLF_DRAW_STR_DUMMY_MAX. Reorders arguments to UI_fontstyle_draw_ex
See D13794 for more details.
Differential Revision: https://developer.blender.org/D13794
Reviewed by Campbell Barton
Reduction of the number of uses of the define BLF_DRAW_STR_DUMMY_MAX
by using actual sizes of static character arrays.
See D13793 for more details.
Differential Revision: https://developer.blender.org/D13793
Reviewed by Campbell Barton
Blender's compositor code already makes extensive use of
namespace which makes it very simple to enable unity build.
There was one duplicated function that has since to be moved
to a common header.
I saw roughly a 3x speedup of bf_compositor using ninja on
linux using i5 8250u (1:34 down to 0:34).
Reviewed By: LazyDodo
Differential Revision: https://developer.blender.org/D13792
With this change, compilation saw a 2.4x improvement.
This can be combined with unity build to give an overall 4x improvement
Depends on D13797
Reviewed By: LazyDodo
Differential Revision: https://developer.blender.org/D13798
Removal of unused tmp member of GHOST_TEventImeData. Not used now,
nor was it used by the commit that added it to begin with.
Differential Revision: https://developer.blender.org/D11799
Reviewed by Ray Molenkamp
our UNUSED macro is essentially a no-op for MSVC, which lead to
the situation where this well meant macro was emitting the
following warning:
C4189: 'UNUSED_i': local variable is initialized but not referenced
However since we have been on c++17 for a while now the UNUSED
macro can be replaced with the standard [[maybe_unused]] attribute
in cpp files.
This changes cleans up the use of the UNUSED macro in the
bf_nodes_geometry project.
Differential Revision: https://developer.blender.org/D12915
Reviewed by: JacquesLucke, Severin, Sergey, HooglyBoogly
Since CMake 3.16, CMake has native precompiled header (PCH) support.
This change swaps Blender's own PCH implementation with the native implementation.
Previously, PCH was only enabled on Windows however,
this new implementation works on all platforms.
For more information see https://cmake.org/cmake/help/latest/command/target_precompile_headers.html
On my system, Linux with ninja running on an i5 8250U
I saw a 60% reduction in compile times for `bf_freestyle` + linking time.
Reviewed By: LazyDodo, brecht
Differential Revision: https://developer.blender.org/D13797
The problem was the points were selected in edit mode and then sampled. Now, in draw mode, the points are always unselected to avoid this effect in the auto merge process.
The new triangulation mode for quads is the opposite of the current default
shortest diagonal mode. It is optimal for cloth simulations using quad meshes.
Differential Revision: http://developer.blender.org/D13777
Issue introduced in rB1d49293b80446b89b5b12fa0eeefaf14e5051e48
`drw_manager_init` must be called after `drw_context_state_init` as
`DST.draw_ctx.sh_cfg` (indicating when the view is clipped) must be set
first.
Differential Revision: https://developer.blender.org/D13795
After disconnecting hair on an object, if you then hide the particle system, and try connecting the hair again, the operator is cancelled due to `remap_hair_emitter` returning `false` because `target_psmd->mesh_final` is NULL, but `connect_hair` will still strip the `PSYS_GLOBAL_HAIR` flag, which will cause the hair in the hidden particle system to be positioned incorrectly. The correct behavior is to strip the flag only if `remap_hair_emitter` succeeds.
Differential Revision: https://developer.blender.org/D13703
When the 'threshold' is not used in the type we are comparing, just hide
it. This was obvious for some types (e.g. Materials), but maybe not so
on others (e.g. Polygon Sides) and potentionally confusing.
Reported by @hitrpr in chat.
Differential Revision: https://developer.blender.org/D13760
This is an update to the correct OCIO role.
It changes `SceneReference` to `scene_linear`
See https://opencolorio.readthedocs.io/en/latest/guides/authoring/overview.html#config-roles
> - reference - the color space against which the other color spaces are defined
>NOTE: The reference role has sometimes been misinterpreted as being the space in which “reference art” is stored in.
>
> - scene_linear - the scene-referred linear-to-light color space, often the same as the reference space
The current OCIO UX working group doc says:
>reference: This role has had multiple interpreted meanings over the years and is a common point of confusion. It is kept in OCIO for backwards compatibility, but the recommendation is that it is not used by apps.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11398
This puts all static functions in composite node files into a new
namespace. This allows using unity build which can improve
compile times significantly.
This is a follow up on rB1df8abff257030ba79bc23dc321f35494f4d91c5
but for compositor nodes.
The namespace name is derived from the file name.
That makes it possible to write some tooling that checks the names later on.
The filename extension (`cc`) is added to the namespace name as well.
his also possibly simplifies tooling but also makes it more obvious that this namespace is specific to a file.
Reviewed By: JacquesLucke, HooglyBoogly, jbakker
Differential Revision: https://developer.blender.org/D13466
If timeline contains scene strip outside of edited meta strip, this will
cause crash. This is because prefetchin ignored meta strips being edited
when rendering, but did check for scene strips only inside edited meta
strip.
Change active seqbase pointer when entering meta strip. This makes it
possible to prefetch only content that is being presented to user.
rBeed45d2a239a introduced a GPU backend for OpenSubDiv which lets us do
the subdivision at render time. However, some tools might still need to
have the subdivision data available on the CPU side. For this a
subdivision mesh wrapper was also introduced, and is computed whenever a
CPU side mesh is needed. The subdivision settings for this wrapper are
stored during modifier evaluation if GPU subdivision can be done.
The performance regression is due to the fact that although the
subdivision mesh was already computed on the CPU, and no subdivision
wrapper is generated, some checks for creating subdivision data in
`BKE_mesh_wrapper_ensure_subdivision` where still run, one of which is
very expensive.
To fix this we first check the runtime settings of the mesh to see if
subdivision is needed at all.
This commit adds topology information from mesh data structs to the
spreadsheet when the debug value `4001` is set. Eventually we could
expose these. For now it can be a useful tool for developers when
working on mesh algorithms.
Differential Revision: https://developer.blender.org/D13735
The value of this flag was only retrieved in `nodeGetActiveID`, which
wasn't used anywhere. Other than that, the `NODE_ACTIVE_ID` and
related functions seem to come from the Blender internal renderer.
Differential Revision: https://developer.blender.org/D13770
This commit moves the normal field input to `BKE_geometry_set.hh`
from the node file so that normals can be used as an implicit input to
other nodes.
Differential Revision: https://developer.blender.org/D13779
Slight change to our processing of Ctrl-C, Ctrl-V, and Ctrl-X so that
they will not be triggered if Alt is also pressed. This allows entry
of AltGr-C, -V, -X when using International keyboard layouts.
See D13781 for more details
Differential Revision: https://developer.blender.org/D13781
Reviewed by Brecht Van Lommel
Treat "/" as a key that should be evaluated by the Win IME system when
the input language is Chinese. This fixes a duplication of the input
character and results in the expected output of a Chinese wide comma.
See D13771 for more details.
Differential Revision: https://developer.blender.org/D13771
Reviewed by Brecht Van Lommel
Consider temporary directory to be variant part of session configuration
which gets communicated to the tile manager on render reset.
This allows to be able to render with one temp directory, change the
directory, render again and have proper render result even with enabled
persistent data.
For the ease of access to the temp directory expose it via the render
engine API (engine.temp_directory).
Differential Revision: https://developer.blender.org/D13790
The issue was caused by the recent changes in the way how the
render result is drawn: the display driver now could hold an
OpenGL resources. Those resources are not shared across contexts
so whenever OpenGL context is destroyed those resources are to
be destroyed as well (and not attempted to be re-used for a next
render).
Do such destruction and entire driver re-creation since it does
simplifies things from API usage point of view without causing
measurable slowdown.
Steps to reproduce the issue:
- Set the render resolution to 2x of Full HD
- Enable persistent data
- Render (F12)
- Render again
Observe OpenGL state being corrupted. Easy to see in debug mode
where IMM abstraction level reports issues about the buffer size
not being the proper size. This was caused by the display driver
trying to use VAO from the previous OpenGL context.
Differential Revision: https://developer.blender.org/D13789
The core issue is that flushing dependencies are created from an object
to a node tree when it contains e.g. a Texture Coordinate node.
That is an issue because the evaluation of the node tree itself does not
depend on the object (node tree evaluation is essentially a no-op).
Only other systems that parse and evaluate the node tree in a specific
context actually depend on e.g. the position of the referenced object.
It can even be the case that the node tree depends on objects that
the actual evaluator (geometry nodes modifier/material) does not depend
on, because a node is not connected to the output.
Geometry nodes makes the distinction between dependencies to the
node tree and to the evaluator already. Shader nodes do not.
Therefore, shader nodes need a flushing relation from node groups
to their parent node groups.
This brings back some unnecessary updates from rB7e712b2d6a0d
(e.g. when creating a node group from nodes that are not connected
to the output). This is a bit unfortunate, but refactoring how
dependencies work with shader nodes is a out of scope for this fix.
Since rBf9ccd26b037d, calling `data.path_resolve()` on custom properties
with `None` value do not cause a `ValueError` exception any more. This
is now taken into account in the keying sets targeting custom
properties.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D13787
rBd6891d9bee2b introduced a way to apply a single constraint from the
constraint stack. For this we want to work in the evaluated domain, in
particular the constraint target should be evaluated (the shrinkwrap
constraint needs to have access to the target's evaluated mesh).
Thx a lot to @sergey for handholding here!
Maniphest Tasks: T94600
Differential Revision: https://developer.blender.org/D13765
This moves the clear paths button ("X") to the same line of "Update All Paths",
and make it visible at all times.
1. The clear button affects all objects (by default). However the
Calculate/Update Paths only works on the selected objects/objects.
Better to not have them both on the same line.
2. The operator to clear object and pose paths can run even if the active
object/bone has no motion path. However the UI was not showing the button in
those cases.
Before:
{F12757500, size=full}
After:
{F12757502, size=full}
Differential Revision: https://developer.blender.org/D13609
Compositor node to convert between color spaces.
Conversion is skipped when converting between the same color spaces or to or from data spaces.
Implementation done for tiled and full frame compositor.
Reviewed By: Blendify, jbakker
Differential Revision: https://developer.blender.org/D12481
Switched populating GHOST_WintabInfoWin32 vector from resizing and
assigning to reserving and pushing.
Removed unnecessary state tracking for multiple button presses in a
single packet.
Paired initialization with definition, and added default initialization
for GHOST_WintabInfoWin32.
Currently the node link ui template only works with a few socket types.
This commit addes support for the rest of the socket type declarations.
As pointed out in D13776 currently after recent refactors
Shader nodes no longer display in the menu.
In the future more socket types will be used in the shader nodes
and makes the UI template work better for other node trees.
Differential Revision: https://developer.blender.org/D13778
Weightpaint gradient tool panel showed in other modes (and as a separate
panel).
Fix for fix, see
- rBf8a0e102cf5e
- rBe549d6c1bd2d
So now, check mode again and restrict to topbar (prevents an additional
panel since this is already included in the brush settings).
ref rB0837926740b3 in sculpt-dev branch, so thx @joeedh as well!
Maniphest Tasks: T94243
Differential Revision: https://developer.blender.org/D13630
Currently, most node buttons are defined in `drawnode.cc` however,
this is inconvenient because it requires editing many files when adding new nodes.
The goal is to minimize the number of files needed to add or update a node.
This commit moves most of the node layout functions for shader nodes into their respected
source/blender/nodes/shader/nodes file.
In the future, these functions will be simplified to node_layout.
Some nodes were left in `drawnode.cc` as this would require duplicating code
while this is likely fine it is best to leave that to a seperate commit.
Some software or processing tools (videogrammetry in this case) may
export malformed files with velocity data even when the frame is empty
for some reason. We need to explicity compare the data size with the
vertex size, and refuse to load the attribute if there is a data size
mismatch.
The dangling pointer caused errors further down the line.
The solution is to simply delete an internal link when one
of the corresponding sockets is removed (just like normal
links are removed as well).
We can't include `BLI_utildefines.h` in `RNA_types.h` since Cycles includes
that, but duplicates some of the util defines. So you'd have duplicated
definitions.
Fixes a bug introduced in rB5dedb39d447b. `mesh_original` is not set if the
mesh has no generative modifiers, in which case we can use `mesh_final`, which
would seem to be consistent with the rest of the particle code. An alternative
approach would be to make sure that `mesh_original` is always set in
`deformVerts`.
Differential Revision: https://developer.blender.org/D13754
Must take into account SD_OBJECT_TRANSFORM_APPLIED to determine if the normal
was already in world space.
Differential Revision: https://developer.blender.org/D13639
The root of the issue is caused by Cycles ignoring OpenGL limitation on
the maximum resolution of textures: Cycles was allocating texture of the
final render resolution. It was exceeding limitation on certain GPUs and
driver.
The idea is simple: use multiple textures for the display, each of which
will fit into OpenGL limitations.
There is some code which allows the display driver to know when to start
the new tile. Also added some code to allow force graphics interop to be
re-created. The latter one ended up not used in the final version of the
patch, but it might be helpful for other drivers implementation.
The tile size is limited to 8K now as it is the safest size for textures
on many GPUs and OpenGL drivers.
This is an updated fix with a workaround for freezing with the NVIDIA
driver on Linux.
Differential Revision: https://developer.blender.org/D13385
This patch fixes a couple of new Metal kernel compilation errors: 1) a kernel parameter count overflow, and 2) missing address space qualifiers.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D13763
Simplify signature of `BKE_lib_override_library_resync` and make it a
shallow wrapper around new internal `lib_override_library_resync` that
can then be easily extended for other internal needs.
Not functional changes expected here.
`DEG_OBJECT_ITER_FOR_RENDER_ENGINE_BEGIN` creates temporary objects that
correspond to duplicates or instances.
These temporary objects can share same pointers with the original object
as in the case of Bounding Box.
Bound Box of temporary objects is marked dirty in
`BKE_object_replace_data_on_shallow_copy` since `ob->data` is different.
This causes the original Bounding Box, calculated for the evaluated
geometry, to be lost.
The solution in this commit is to change the boundbox reference of the
temporary objects, so the boundbox of the non-temporary object (with
the data curve) is not marked dirty.
Differential Revision: https://developer.blender.org/D13581
It it rather an old experiment now which didn't pay off.
The initial idea was to have main and jobs threads on fast
nodes of TR2 processors. This didn't really work reliably
because in Blender we need to be able to create nested
threads without their affinity set. This is not how some of
OS are creating nested threads, and we don't always have
access to child threads to reset their affinity.
So overall complexity of the initial idea implementation
became too much compared to the performance gain.
Request from studio, to help identify quickly libs that need update.
NOTE: Currently only outputing INFO log in console, display of this info
in the outliner will come in a separate commit.
No need for it now since all the threading queries and
scheduling is done via TBB.
Should be no functional changes as all the removed code
is supposed to be unused.
Query TBB for the maximum allowed concurrency, which is free from a bug
in own concurrency detection code. One thing to keep in mind is that now
Cycles is limited by the number of threads in the TBB areana from which
Session is created. This isn't a problem for Blender since we do not limit
arena on Blender side. Could be something to watch out for in other Cycles
integrations.
Differential Revision: https://developer.blender.org/D13658
Add a data boundary check in the flipping code.
This code now also communicates the number of mipmap levels
it processed with an intent to avoid GPU texture from using
more levels than there are in the DDS data.
Differential Revision: https://developer.blender.org/D13755
This was missing from rB3e92b4ed2408eacd126c0.
Before only the Separate Geometry node was fixed, because that
node was used in the file from the bug report. The same issue
existed in the Delete Geometry node as well though.
Regression in 7972785d7b that caused
Python callback arguments to be de-referenced twice - potentially
accessing freed memory. Making a new-file with a circle-select
tool active triggered this (for example).
Now arguments aren't de-referenced when Blender it's self has already
removed the callback handle.
Fix IMB_flip[xy] to handle cases where integer overflow might occur when
given sufficiently large image dimensions.
All of these fixes were of a similar class where the intermediate
sub-expression would overflow silently. Widen the types as necessary.
Differential Revision: https://developer.blender.org/D13744
Assert that only the file name component is passed in
since special handling for UDIM should only be applied to the file name.
Also remove an unnecessary NULL check on the filename argument.
For sake of consistencey with other node tree types, create its own cmake module.
This change helps keep `bf_nodes` focused on generic nodes files.
Texture nodes are end of life and hopefully for Blender 4.0 they can be removed.
It is not expected that these will see the updates that the other nodes are getting.
This change also helps isolate the end of life files, we may move some texture
specific node tree execution code out of `node_exec` and into a `node_texture_exec` files.
Differential Revision: https://developer.blender.org/D13743
Sculpt Smooth in Surface mode (as opposed to Laplacian) needs a cache
initialized on first time. In anchored stroke mode with spherical falloff
this was skipped though (because this starts of with no PBVH nodes and
an early return checks for this) and `first_time` was set to false before
cache initialization.
Now move the cache initalization to happen earlier (same as the cache
initialization for automasking).
Maniphest Tasks: T94635
Differential Revision: https://developer.blender.org/D13746
The `lines_adjacency` IBO build in the GPU subdivision case was missing
edges at the boundaries of open meshes. As it is used for the shadow
pass, the shadows were then not clipped properly.
This would also make X-Ray mode render differently in those cases.
To fix this, we can simply reuse the buffer finalization routine from the
non-subdivision case, as such edges are handled there.
This relation is intended to ensure that the properties of the IK
constraint are ready by the time the IK solver tree is built. This
however can cause spurious dependency cycles, because there is only
one init tree node for the whole armature, and the relation actually
implies dependency on all properties of the bone.
This patch reduces spurious dependencies by only creating the relation
if any properties of the IK constraint specifically are animated.
Differential Revision: https://developer.blender.org/D13714
When weight painting the bone overlay is extremely intrusive,
effectively requiring either extensive use of hiding individual
bones, or disabling the whole bone overlay between selections.
This addresses the issue by adding a bone opacity slider that
is used for the 'wireframe' armature drawing mode. It directly
controls the uniform opacity as a straightforward option.
Differential Revision: https://developer.blender.org/D11804
If multiple bones have a custom property with the same name,
depsgraph didn't distinguish between them, potentially leading
to spurious cycles.
This patch moves ID_PROPERTY operation nodes for bone custom
properties from the parameters component to individual bone
components, thus decoupling them.
Differential Revision: https://developer.blender.org/D13729
Oversight in {rB9cb5f0a2282a}.
Above commit made an entry in `rna_Space_refine()`, but the entry in
`rna_Space_refine_reverse()` was missing (and this is what python uses
for the Space callbacks).
Maniphest Tasks: T94685
Differential Revision: https://developer.blender.org/D13751
The crash is caused as the data is only for the first frame, but the mesh
changes topology, so reading the data in subsequent frames causes a
buffer overflow. To fix this, we check that the data size matches the
mesh's vertex count.
Remove `const` from pass-by-value parameters in function declarations.
The variables passed as parameters can never be modified by the function
anyway, so declaring them as `const` is meaningless. Having the
declaration there could confuse, especially as it suggests it does have
a meaning, training people to write meaningless code.
Remove `const` from pass-by-value parameters in function declarations.
The variables passed as parameters can never be modified by the function
anyway, so declaring them as `const` is meaningless. Having the
declaration there could confuse, especially as it suggests it does have
a meaning, training people to write meaningless code.
Error in ffc4c126f5,
which moved doc-strings from implementation into headers.
Some changes in BKE_animsys.h needed to done manually as there
were already doc-strings in both the header and implementation
(with overlapping information).
When making these changes some doc-strings were removed unintentionally.
Thanks for @sybren for the heads up.
MSVC2017 and early 2019 versions are under
the impression struct OGLRender is non trivial
type due to the ThreadCondition field, not
entirely sure why, but it is what it is.
Differential Revision: https://developer.blender.org/D13742
Reviewed by: JacquesLucke
Just disable these tests on macOS for now as fixing seems hard, and we want to
be able to cross-compile and test x86_64 on Arm machines on the buildbot.
An important check to reject edge linehits when a vertex of that edge
was already hit was accidentally removed in
rB6e77afe6ec7b6a73f218f1fef264758abcbc778a
From what I can tell these are left over from Blender Internal render.
Test still pass locally, also tested a couple eevee scenes.
Reviewed By: JacquesLucke, brecht
Differential Revision: https://developer.blender.org/D13732
When tiled rendering was used the render result was
allocated at the end of every view layer render as
opposite of an intended end of all rendering.
Modify the render_result_end so that it only ensures
pixels are allocated if pixels are actually copied
over.
Overrides that are not created as part of an override hierarchy should
not be handled through (auto)resync at all. users are responsible to
hanlde those updates if they need it.
This is achieved by flagging overrides created outside of a hierarchical
process accordingly, and skipping them during resync process.
The current preview generation is more confusing than useful.
Therefore it is better to disable it until better preview generation
methods are found.
Differential Revision: https://developer.blender.org/D13728
The crash was caused by using `modify_geometry_sets` to modify
instances, which does not generally work unfortunately.
The intended behavior was wrong anyway. In instances mode,
only top level instances should be deleted.
Also removed the old error handling because it doesn't look like it
ever worked. all_is_error remained false all the time.
Furthermore, updating it was not thread safe.
Differential Revision: https://developer.blender.org/D13736
Take the Use Modifier Stack setting into account when connecting hair, and
fix wrong results results when using deforming modifiers also.
Differential Revision: https://developer.blender.org/D13704
Enables the `bpy.ops.cycles.denoise_animation()` operator again and modifies it to support
temporal denoising with OptiX. This requires renders that were done with both the "Vector"
and "Denoising Data" passes.
Differential Revision: https://developer.blender.org/D11442
This adds support to render PointCloud motion blur from a standard
"velocity" attribute.
This implementation is similar to that of the Mesh geometry, and
perhaps some code could be deduplicated through a more generic API.
`mesh_need_motion_attribute` was renamed `object_need_motion_attribute`
as it does not really require a mesh and moved to `util.h` so that
it can be shared.
This fixes T94622.
Reviewed By: brecht
Maniphest Tasks: T94622
Differential Revision: https://developer.blender.org/D13719
The DWAB compression was disabled in the d59721c2c3 due to
a bug in the OpenEXR library which is now resolved.
Re-enable the DWAB compression for OpenEXR output. It is a
simple change, and DWAB often behaves better than DWAA.
Differential Revision: https://developer.blender.org/D13713
If a mirror object is used in a mirror modifier, sculptmode did not take
this into account (and instead always clipped on the sculpt objects
local axis).
Now take this into account by storing a matrix in the preparation
function `sculpt_init_mirror_clipping` and use that later in
`SCULPT_clip`.
Maniphest Tasks: T94564
Differential Revision: https://developer.blender.org/D13711
This case wasn't handled in rBf5ce243a56a22d718 correctly.
Now `object_get_evaluated_geometry_set` just returns a geometry
set that contains the collection instance for collection instance objects.
Just an oversight in rBe9607f45d85d.
Now add notifier that toolsettings changed.
Maniphest Tasks: T94366
Differential Revision: https://developer.blender.org/D13723
Previously operations for the math node when connecting to
outputs weren't added. It also used a different method to
check whether the link would be valid.
Do not temporarily change U.pixelsize while creating object previews
in object_preview_render. It does nothing to the render, but the change
in line width can affect other UI drawing since it is done in a thread.
see D13717 for for details.
Differential Revision: https://developer.blender.org/D13717
Reviewed by Julian Eisel
Along with the general changes to CPP this commit does the following
- Use static casts where possible
- Use new CPP MEM library functions instead of cast
- Use listbase macros where possible
- Declare variables where initialized
Reviewed By: HooglyBoogly, JacquesLucke
Differential Revision: https://developer.blender.org/D13718
Dragging from a color socket would hit an assert in a debug build.
The node does not have a color mode currently, so use the vector mode
instead when connecting to a color socket.
std::min was used without including the algorithm
header. Seems to be implicitly included by
something in newer MSVC versions and GCC, however
vs16.4 needed a little help here.
Since 2.8, background images are tied to cameras (in 2.79 these were
tied to a View3D I think).
Code in `BKE_library_id_can_use_idtype` wasnt taking this relation
between `Camera` and `Image` into account, thus leading to ID deletion/
unlinking not working properly -- in particular `libblock_remap_data`
not doing its thing (and leaving the camera as a user of the image),
then things went downhill from there...
Now make the "Camera-can-use-an-Image" relation clear in
`BKE_library_id_can_use_idtype`.
Maniphest Tasks: T94544
Differential Revision: https://developer.blender.org/D13722
Currently the crop higher limits are inclusive too which contradicts
the documentation as it says that if Left and Right are both 50, it
will result in a zero-sized image. And the result is one pixel out of
the crop gizmo, which is another hint that this is not intended.
In "Full Frame" experimental mode it's two pixels short because of
a misuse of `BLI_rcti_isect_pt` as it considers max limits inclusive.
Reviewed By: jbakker
Maniphest Tasks: T90830
Differential Revision: https://developer.blender.org/D12786
The frame indicator/controller is not displayed when in the Graph or Dopesheet view of the Movie Clip Editor
To solve this we could call the function ED_time_scrub_draw_current_frame in clip_draw_dopesheet_main and graph_region_draw in space_clip.c
Reviewed By: jbakker
Maniphest Tasks: T91160
Differential Revision: https://developer.blender.org/D12659
Enable unity builds for `bf_nodes_shader`, gives about a 2.7x speedup
of total compile times when just building `bf_nodes_shader`.
On my machine, this equates to saving about 30 seconds.
Differential Revision: https://developer.blender.org/D13720
Function `blend_color_softlight_float` used math different to compositor and
produced result that had abrupt value changes.
Use math based on modified screen blend mode as compositor does.
This flag is only used a few small cases, so instead
of setting the flag for every node only set the
required flag for the nodes that require it.
Mostly the flag is used to set `ntype.flag = NODE_PREVIEW`
For nodes that should have previews by default which
is only some compositor nodes and some texture nodes.
The frame node also sets the `NODE_BACKGROUND` flag.
All other nodes were setting a flag of 0 which has no purpose.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D13699
This was originally written by Ankit Meel as a GSoC 2020 project.
Howard Trickey added some tests and made some corrections/modifications.
See D13046 for more details.
This commit inserts a new menu item into the export menu called
"Wavefront OBJ (.obj) - New".
For now the old Python exporter remains in the menu, along with
the Python importer, but we plan to remove it soon (leaving the
old addon bundled with Blender but not enabled by default).
Compare the start of the range to zero to figure out whether the
indices for the instances to keep starts at zero. Also rename the
selection argument, since it made it seem like the selected indices
should be removed rather than kept.
The activation of the text button is a bit special, since it happens during
drawing, the layout isn't computed yet then. Comparable cases where the button
is added on top don't use the layout system, so this didn't become an issue
until now. Trigger a delayed call to `UI_but_ensure_in_view()`.
This completes 1a721c5dbe by versioning old files to correct the
region type. The "tools" region type is relatively standard for this type
of region and doesn't require any changes to the theme, unlike
the "nav bar" type, which would have been a reasonable choice.
Calculates the angle in radians between two faces that meet at an edge.
0 to PI in either direction with flat being 0 and folded over on itself PI.
If there are not 2 faces on the edge, the angle will be 0.
For valid edges, the angle is the same as the 'edge angle' overlay.
For the Face and Point domain, the node uses simple interpolation to calculate a value.
Differential Revision: https://developer.blender.org/D13366
Occured because "PATH_RAY_SHADOW_CATCHER_BACKGROUND" is expressed as an unsigned
integer, because too large for a signed integer, but the "PathRayFlag" enum type defaulted to a
signed integer still.
Allow overriding simple properties of cloth simulations, colliders
and force fields. Vertex group and shape key selectors in cloth are
still not overridable since they are tied to mesh data.
Force fields have a number of physical fields shared between multiple
RNA fields. Until they are decoupled, they will produce redundant
overrides, and cannot have different hard range limits.
Differential Revision: https://developer.blender.org/D13710
Regression introduced in rB098008f42d8127d9b60717c7059d3c55a3bfada7
Previously the selected geometry was ignored along with the hidden one.
The mentioned commit caused neither the hidden nor the selected one to be ignored.
But hidden geometry needs to be ignored.
Continuation of the D13404 which finished the design of not having
geometry-level nodes dependent on object-level.
Differential Revision: https://developer.blender.org/D13405
Weirdly enough, our 'mono' font already had it, but not the main one.
Copied from DeJaVu sans font.
CC @Tamuna who started the translation for that language.
This implements the design detailed in T92696 to support virtual
filenames for UDIM textures. Currently, the following 2 substitution
tokens are supported:
| Token | Meaning |
| ----- | ---- |
| <UDIM> | 1001 + u-tile + v-tile * 10 |
| <UVTILE> | Equivalent to u<u-tile + 1>_v<v-tile + 1> |
Example for u-tile of 3 and v-tile of 1:
filename.<UDIM>_ver0023.png --> filename.1014_ver0023.png
filename.<UVTILE>_ver0023.png --> filename.u4_v2_ver0023.png
For image loading, the existing workflow is unchanged. A user can select
one or more image files, belonging to one or more UDIM tile sets, and
have Blender load them all as it does today. Now the <UVTILE> format is
"guessed" just as the <UDIM> format was guessed before.
If guessing fails, the user can simply go into the Image Editor and type
the proper substitution in the filename. Once typing is complete,
Blender will reload the files and correctly fill the tiles. This
workflow is new as attempting to fix the guessing in current versions
did not really work, and the user was often stuck with a confusing
situation.
For image saving, the existing workflow is changed slightly. Currently,
when saving, a user has to be sure to type the filename of the first
tile (e.g. filename.1001.png) to save the entire UDIM set. The number
could differ if they start at a different tile etc. This is confusing.
Now, the user should type a filename containing the appropriate
substitution token. By default Blender will fill in a default name using
the <UDIM> token but the user is free to save out images using <UVTILE>
if they wish.
Differential Revision: https://developer.blender.org/D13057
It is common to have fields that contain a constant value. Before this
commit, such constants were represented by operation nodes which
don't have inputs. Having a special node type for constants makes
working with them a bit cheaper.
It also allows skipping some unnecessary processing when evaluating
fields, because constant fields can be detected more easily.
This commit also generalizes the concept of field node types a bit.
Currently, a node either supports lazyness during execution (like the Switch
node), or it doesn't. If it does support lazyness, then every input is computed
lazily. However, usually not all inputs actually have to be computed lazily.
E.g. the boolean switch input is always required, while the other inputs
should be computed lazily.
Better support for such sockets can avoid unnecessary round trips through
the node execution function.
Exposes compare operations via rna emums.
This uses the rna enum to build the search list using
named operations linked to socket A.
This also weights the Math Node comparison operations lower
for geometry node trees.
Differential Revision: https://developer.blender.org/D13695
The logic used to be:
"if collection doesn't have child collection, check if ob is from this one"
The correct logic should be:
"if collection child does not have this ob, then check this collection".
In the past that worked because the `GPUMaterial` referenced the
`ImageUser` from the image node. However, that design was incompatible
with the recent node tree update refactor (rB7e712b2d6a0d257d272e).
Also, in general it is a bad idea to have references between data that is
owned by two different data blocks.
This incompatibility was resolved by copying the image user from the node
to the `GPUMaterial` (rB28df0107d4a8). Unfortunately, eevee depended
on this reference, because the image user on the node was update when the
frame changed. Because the image user was copied, the image user in the
`GPUMaterial` did not receive the frame update anymore.
This frame update is added back by this commit. The main change is that
the image user iterator now also iterates over image users in `GPUMaterial`s
on material and world data blocks. An issue is that these materials don't
exist on the original data blocks and that caused the check in
`build_animation_images` in the depsgraph to give the wrong answer.
Therefore the check is extended.
Right now the check is not optimal, because it results in more depsgraph
nodes than are necessary. This can be improved when it becomes cheaper
to check if a node tree contains any references to a video texture.
The node tree update refactor mentioned before makes it much easier
to construct this kind of run-time data from the bottom up, instead of
scanning the entire node tree recursively every time some information
is needed.
This just skips the entire algorithm when there are cycles.
In the future, cycles could be handled more gracefully in the
algorithm, but for now that's not worth it and is not necessary
to fix the bug.
As @hooglyboogly suggested in D13680, this patch adds weighting
to the search results. Dragging from a vector/rgba socket weights
the Vector Math node higher than a float Math node, and vice versa.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D13691
When the material is used in several objects, the filter by material is not working as expected because the internal pointers are different due eval version.
Now, the original version of the material is compared to keep same address.
This is analagous to 6a71b2af66 which did the same
thing for mesh data. Two differences are that here the coordinates
are simply `float3`, and we account for the radius if it's available.
Here I observed a similar performance increase, from 50ms
average to 10ms average, with 16 million points, a 5x speedup.
The calculation is about 1.4 times faster when no radius is used, down
to 7.3ms average. Before, the calculation was only 1.2 times faster.
This was caused by a mistake in eb0eb54d96, which removed
the clearing of the curve edit mode pointers that are set when creating
the temporary data for the conversion. If they are not cleared, the
generic ID free function will also free the edit mode data, which is
wrong when the source curve is in edit mode.
At the time of allocating the buffer with vertices in context, we don't
know exactly how many vertices are affected, but we do know that it is
less than or equal to twice the number of vertices killed.
This just moves the relations update to a lower level function that is used
by other functions. Eventually, the special case for this node should be
generalized.
Ever since the instance domain was added, this was exposed, it just
didn't do anything. This patch implements the instances domain in the
delete and separate geometry nodes, where it acts on the top-level
instances.
We act on a mutable instances input, with the idea that eventually
copy on write attribute layers will make this less expensive. It also
allows us to keep the instance references in place and to do less
work in some situations.
Ref T93554
Differential Revision: https://developer.blender.org/D13565
This function node creates a running total of a given Vector, Float, or
Int field.
Inputs:
- Value: The field to be accumulated
- Group Index: The values of this input are used to aggregate the input
into separate 'bins', creating multiple accumulations.
Outputs:
- Leading and Trailing: Returns the running totals starting
at either the first value of each accumulations or 0 respectively.
- Total: Returns the total accumulation at all positions of the field.
There's currently plenty of duplicate work happening when multiple outputs
are used that could be optimized by a future refactor to field inputs.
Differential Revision: https://developer.blender.org/D12743
A few typos in 17770192fb lead to an incorrect count of custom
data layers in the test meshes. We only want to consider layers that are
not anonymous, and there was a copy and paste mistake.
`GeometrySet::compute_boundbox_without_instances` may not initialize min
max in some cases such as meshes without vertices.
This can result in a Bounding Box with impossible dimensions
(min=FLT_MAX, max=-FLT_MAX).
So repeat the same solution seen in `BKE_object_boundbox_calc_from_mesh`
and set boundbox values to zero.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D13664
All these function paramaters are set to NULL so they arent necessary.
Reviewed By: HooglyBoogly, JacquesLucke
Differential Revision: https://developer.blender.org/D13686
Some projects need more than 8-bit RGBA off-screen, so add the ability to
accept color format and defaults to RGBA8 so existing code should not be
affected.
Currently supported formats:
- RGBA8 (default)
- RGBA16
- RGBA16F
- RGBA32F
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D13650
Blend factor was used to adjust alpha of background image, which is not
correct. This was done in fdee84fd56 where another change was, that
background alpha is copied into result, which is correct.
Apply blend factor to foreground image alpha channel.
The array modifier does not necessarily tag normals dirty.
If it doesnt, normals are recalculated "internally" using the offset ob
transform. This was happening for the array items, but not for the caps.
Now do the same thing for caps.
Maniphest Tasks: T94422
Differential Revision: https://developer.blender.org/D13681
I had assumed that the span's size was the same as the length variable.
In the future, separate lengths could be removed in favor of using
lengths directly from spans.
Fixes two instances of `-Wunused-but-set-variable`
There are several more of these but these were low hanging
and noisy with one being in a header functions.
Unity build saves 5 seconds off the total build time when compiling `bf_nodes_function`.
Total build times went from 25s to 20s (20% reduction),
tested with ninja on linux running i5 8250U.
Using the output declarations is incorrect because there is a
declaration for each type. Instead loop over the names directly,
since it will make it easier to add an integer mode that only
supports some of the outputs.
The calculation to find the factor between two evaluated points assumed
that the points were not at the same location. This assumption is some-
what reasonable, since we might expect `lower_bound` to skip those
point anyway. However, the report found a case where the first two
evaluated points were coincident, and there is no strong reason not
to make this safe, so add a check for 0 length before the division.
The region used to be type "Channels", but the standard for this
type is "Tools", which is what the file browser uses. This follows
the changes in rB01df48a98394, which also make the region more
"standard."
Some effect functions looped over alternating lines, previously with
different factors. Since only one factor is used, code can be
simplified by looping all lines in one for loop.
There should be no functional changes.
* Assert about source ID of an overridden pointer property not being a
liboverride was not necessary, just skip in that case.
* Tag actual 'real' ID owner for resync, and not (potentially) an embedded one.
2 factor variables were passed to effects, but they were hard coded to
have same value.
Remove duplicate variable from arguments, rename single argument to
`fac`. Inverted factor variables were renamed to `mfac`. Any other
factor related variables are prefixed with `temp_`.
There should be no functional changes.
If the override system creates an override record for the cache
name (no idea why though), it trashes the disk cache on file load.
The reason is that it tries to rename cache files in update handler
when assigning the name, and BLI_rename deletes the target file even
if both names are the same.
This is a safe fix that simply aborts the pointless rename attempt.
Differential Revision: https://developer.blender.org/D13679
This evaluator is used in order to evaluate subdivision at render time, allowing for
faster renders of meshes with a subdivision surface modifier placed at the last
position in the modifier list.
When evaluating the subsurf modifier, we detect whether we can delegate evaluation
to the draw code. If so, the subdivision is first evaluated on the GPU using our own
custom evaluator (only the coarse data needs to be initially sent to the GPU), then,
buffers for the final `MeshBufferCache` are filled on the GPU using a set of
compute shaders. However, some buffers are still filled on the CPU side, if doing so
on the GPU is impractical (e.g. the line adjacency buffer used for x-ray, whose
logic is hardly GPU compatible).
This is done at the mesh buffer extraction level so that the result can be readily used
in the various OpenGL engines, without having to write custom geometry or tesselation
shaders.
We use our own subdivision evaluation shaders, instead of OpenSubDiv's vanilla one, in
order to control the data layout, and interpolation. For example, we store vertex colors
as compressed 16-bit integers, while OpenSubDiv's default evaluator only work for float
types.
In order to still access the modified geometry on the CPU side, for use in modifiers
or transform operators, a dedicated wrapper type is added `MESH_WRAPPER_TYPE_SUBD`.
Subdivision will be lazily evaluated via `BKE_object_get_evaluated_mesh` which will
create such a wrapper if possible. If the final subdivision surface is not needed on
the CPU side, `BKE_object_get_evaluated_mesh_no_subsurf` should be used.
Enabling or disabling GPU subdivision can be done through the user preferences (under
Viewport -> Subdivision).
See patch description for benchmarks.
Reviewed By: campbellbarton, jbakker, fclem, brecht, #eevee_viewport
Differential Revision: https://developer.blender.org/D12406
Before one could only create a new group input using the link drag search.
With this patch it becomes possible to create a Group Input node for an
existing input.
Differential Revision: https://developer.blender.org/D13674
This adds `blender::is_same_any_v` which is the almost the same as
`std::is_same_v`. The difference is that it allows for checking multiple
types at the same time.
Differential Revision: https://developer.blender.org/D13673
The edge is linked twice from differen calls during line art calculation
Probably caused by a merge and both calls stayed for some reason.
This would lead to edge link overflowing its limit of 2^16 items.
The crash happens when opening a panel (added in rB43f5e761a66e87fed664a199cda867639f8daf3e)
when no CacheFile is set in the modifier.
To fix this, check that the CacheFile pointer is not null before attempting to draw anything.
Most of the comment block is similar to the text in the source
code documentation wiki. It's helpful to have some text in
a header file too, so it's closer for programmers already looking
at the code.
This also uses more consistent syntax and wording in the comments
about the attribute API in `GeometryComponent`.
Ref T93753
Differential Revision: https://developer.blender.org/D13661
This patch adds the breakdown (or tween) functionality to the graph editor.
The factor defines the linear interpolation from left key to right key.
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D9375
Ref: D9375
This node is a bit special in that it uses two internal sockets
for a hack for Eevee; see rBffd5e1e6acd296a187e7af016f9d7f8a9f209f87
As a result, the `SOCK_UNAVAIL` flag is exposed to socket builder API.
Reviewed By: JacquesLucke, fclem
Differential Revision: https://developer.blender.org/D13496
This patch adds the blend to neighbor operator to the Graph editor.
The operator acts like the blend to neighbor operator for a pose context, just working on keyframes.
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D9374
Ref: D9374
The issue was caused by rB7e712b2d6a0d257d272ed35622b41d06274af8df
and the fact that `GPUMaterialTexture` contains an `ImageUser *` which
references the `ImageUser` on e.g. `NodeTexImage`.
Since the node tree update refactor, it is possible that the node tree changes
without changing the actual material. Therefore, either the renderer should
check if the node tree has changed or it should not store pointers to data in
node storage. The latter approach is implemented in this patch.
Differential Revision: https://developer.blender.org/D13663
Loops come last in the struct's definition, use the same order when
initializing the common masks in customdata.c (they were switched
with the poly masks).
Typically a node group should only have a single Group Output node.
However, currently Blender already supports having multiple group outputs,
one of which is active. This wasn't handled correctly by geometry nodes.
Differential Revision: https://developer.blender.org/D13611
rB05f900e3466b45a19e13bea6dd641e4f7b8b46e9 removed unused button functions,
but since that commit the `uiDefIconTextButBit()` static function sits
unused as well. It's now been removed.
This looks like a copy and paste error from the original commit.
The virtual array output used the number of mesh polygons instead
of the number of edges.
These were part of the older buttons API that shouldn't be used in
more places at this point. Most layouts should be built with the regular
layout system API and RNA properties. This sort of button can still be
created though, since these were just shortcuts anyway.
This adds interface panels to organize the Cache File UI parameters for
modifiers and constraints into related components: velocity, time, and
render procedural.
Properties relating to the three aforementioned components are separated
from `uiTemplateCacheFile` into their own functions (e.g.
`uiTemplateCacheFileVelocity` for the velocity one), which are in turn
called from the specific panel creation routines of the modifiers and
constraints (for constraints, the functions are exposed to the RNA).
`uiTemplateCacheFile` now only shows the properties for the file path,
and in the case of constraints, the scale property.
The properties that are only defined per modifier (like the velocity
scale), are shown in the proper modifier layout panel if applicable.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D13652
When using graph slider operators like D9374
it showed a warning when no keys were selected.
However since that stops the modal operation it should be an Error.
Also the message was misleading
since it could error for different reasons than stated.
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D13655
Ref: D13655
The `BKE_animdata_driver_path_hack()` function has had almost no effect
since rB51b796ff1528, and basically boils down to:
```
return base_path ? base_path : RNA_path_from_ID_to_property(ptr, prop);
```
Since `base_path` was `NULL` in the majority of cases, it's just been
replaced by a direct call to `RNA_path_from_ID_to_property()`. The
conditional now just appears in one remaining case.
This relates to T91387.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D13646
Do not allow 3DView operator to run on the liboverride of an
instantiating Empty object. And tweak behavior in the Outliner
operations too.
Related to T94226.
Note that this remains fairly exotic, bad idea not recommended cases,
such complex inter-dependencies between different libraries inside a
same liboverride hierarchy is just not possible to handle properly.
rBbd3bd776c893 broke compilation here due to missing type declaration
for basic types as the source file is not including this header. In any
case, it is the responsibility of header files to include headers for
types used by value in function parameters or struct definitions.
If the input mesh had no materials already, the new material would
become the only material on the mesh, meaning the material was
added to all of the faces, instead of just the selected faces.
The mesh primitive nodes in geometry nodes already add an empty
slot by default, so this only affects outside geometry.
The fix is just adding an empty slot before the new slot, so the
non-selected material indices can still point to an empty slot.
Differential Revision: https://developer.blender.org/D13654
It's better to calculate the size of a spline before creating it, and this
should simplify refactoring to a data structure that stores all point
attribute contiguously (see T94193). The mesh to curve conversion is
simplified slightly now, it creates the curve output after gathering all
of the result vertex indices. This should be more efficient too, since
it only grows an index vector for each spline, not a whole spline.
Previously only the float version of the node was connected to.
This adds connection operations for vector sockets, and exposes
the "Steps" socket properly when it's selected.
Caused by capturing local variables by reference in a function that
outlives the scope it was created in. Also use a more generic function
for the first two inputs.
I don't think this has been visible, since I only ran into it after
changing other code that affected this. However, some attributes
can keep a reference to the source component to use when tagging
caches dirty (like the position attribute tagging the normals dirty).
Here, the component was created inside a function, then the attributes
were used afterwards.
Also add some comments warning about this in the header file.
When COM_EXPORT_GRAPHVIZ is enabled, DebugInfo::graphviz
uses a char[1000000] as local variable. When this function
is called this is allocated on the stack, which has a size
of just 1MB on mac and may cause a stack overflow.
This patch allocates the memory on the heap and frees
the memory at the end of the function.
Reviewed By: LazyDodo
Differential Revision: https://developer.blender.org/D13628
This should be faster because it avoids reallocating the internal
vectors when the size is known beforehand, but it may also help
a potential refactor to a different data structure (see T94193).
Toggling node mute doesn't cause node trees to reevaluate after
rB7e712b2d6a0d257. Toggling a link mute still works though. To fix this,
the operator tags the node and node with a new update tag function
(that uses an existing tag internally).
Differential Revision: https://developer.blender.org/D13653
`SOCK_IN_USE` is now set in `update_socket_used_tags` in
`node_tree_update.cc` when a node tree is changed.
It doesn't need to run every single redraw. Removing this
results in a small speedup of 0.4 ms when drawing a tree
with about 4000 nodes (from about 70 ms total).
Differential Revision: https://developer.blender.org/D13645
This replaces the single-threaded calculation of mesh min and max
positions with a `parallel_reduce` loop. Since the bounding box
of a mesh is retrieved quite often (at the end of each evaluation,
currently 2(?!) times when leaving edit mode, etc.), this makes for a
quite noticeable speedup actually.
On my Ryzen 3700x and a 4.2 million vertex mesh, I observed
a 4.4x performance increase, from 14 ms to 4.4 ms.
I added some methods to `float3` so they would be inlined, but
they're also a nice addition, since they're used often anyway.
Differential Revision: https://developer.blender.org/D13572
Fix is similar to how CollectionObject with NULL object pointers are handled.
Using one of the 'free' pad bytes in Object_Runtime struct instead of a
gset (or other external way to detect object duplicates), as this is
several times faster.
NOTE: This makes remapping slightly slower again (adds 10 extra seconds
to file case in T94059).
General improvements of remapping time complexity, especially when
remapping a lot of IDs at once, is a separate topic currently
investigated in D13615.
This commit fixes the crash itself, however this can still lead to a
same collection 'owning' the same object several time.
Issue here was a bad assumption in layer resync code, that would lead to
removing valid objects from the viewlayer's `object_bases_hash` in
`BKE_layer_collection_sync`, when deleting no-more-used bases, in case
of bases duplicate.
The cast to size_t leads to a build issue on 32
bit archs. cursor_delim_type_utf8 expects an int
so an additional cast to size_t is not required.
Reported by user frispete on devtalk.
The problem was the number of points for each edge of the box was wrong and the wheelmouse effect was anulated.
Also fixed the value displayed in the status bar to keep consistency with subdivision value.
Reviewed By: lichtwerk
Maniphest Tasks: T93999
Differential Revision: https://developer.blender.org/D1363
When copying a full node tree, we can avoid an O(n^2) loop finding a
unique name for every node if we assume they already have unique names.
That is a reasonable assumption, since unique names are verified
elsewhere when adding a new node.
Copying a node tree with about 4000 nodes took 42 ms before,
now it takes 6 ms.
Differential Revision: https://developer.blender.org/D13644
These pointers point to the new nodes when duplicating,
and their even used to point to "original" nodes for
"localized" trees. They're just a bad design decision
that make code confusing and buggy.
Instead, node copy functions now optionally add to a map
of old to new socket pointers. The case where the compositor
abused these pointers as "original" pointers are handled
by looking up the string node names.
Differential Revision: https://developer.blender.org/D13518
Previously, the values passed to a multi-input socket were stored
in the order that they arrived in. Then, when the values are accessed,
they are sorted depending on the link order.
Now, the ordering is determined in the beginning before execution starts.
Every value is assigned to the right index directly, avoiding the sort
in the end. This makes the ordering more explicit.
This errored out in two scenarios:
- current frame not in strips framerange (this was reported)
- no strips selected at all
Now handle these cases properly in the operator and give appropriate
report info.
Maniphest Tasks: T94295
Differential Revision: https://developer.blender.org/D13642
Caused by {rBb0d9e6797fb8}
For the header (both Graph Editor case in general `headerTranslation` as
well as `headerTimeTranslate`) we are interested in deltas values
(not absolute values).
Since culprit commit, `snapFrameTransform` was not working with deltas
anymore, but we have to compensate for this.
For the Graph Editor, this only worked "by accident" in rB7192e57d63a5,
since `ival` is still zero at this point.
So now, reacquire the delta right after the snap operation.
Also use a more appropriate center value in the translate operator.
Maniphest Tasks: T94191
Differential Revision: https://developer.blender.org/D13641
This commit makes freeing a node tree about 25 to 30 times faster.
Freeing a node tree happens whenever it is edited. Freeing a node
tree with about 4000 nodes went from 30-50ms to about 2 ms.
This was so slow before because for every node that was freed
when freeing the node tree, `node_free_node` looped over all
other nodes to detach frames, and then looped over all links to
remove any links connected to the node. That was all pointless
work because everything else is about to be freed anyway.
Instead, move that "detaching" behavior to the dedicated function
for removing a single node, and to the "local" version of the free
function to be safe, since I know less about what that version expects.
Differential Revision: https://developer.blender.org/D13636
On Windows, encode file paths as UTF-16 before trying to open the file
for reading/writing.
This introduces a new class `blender::fstream`, which wraps
`std::fstream` and provides this UTF-16 encoding. This class should also
be used in other areas, like the Alembic importer/exporter.
Manifest Task: T93960
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D13633
Goals of this refactor:
* More unified approach to updating everything that needs to be updated
after a change in a node tree.
* The updates should happen in the correct order and quadratic or worse
algorithms should be avoided.
* Improve detection of changes to the output to avoid tagging the depsgraph
when it's not necessary.
* Move towards a more declarative style of defining nodes by having a
more centralized update procedure.
The refactor consists of two main parts:
* Node tree tagging and update refactor.
* Generally, when changes are done to a node tree, it is tagged dirty
until a global update function is called that updates everything in
the correct order.
* The tagging is more fine-grained compared to before, to allow for more
precise depsgraph update tagging.
* Depsgraph changes.
* The shading specific depsgraph node for node trees as been removed.
* Instead, there is a new `NTREE_OUTPUT` depsgrap node, which is only
tagged when the output of the node tree changed (e.g. the Group Output
or Material Output node).
* The copy-on-write relation from node trees to the data block they are
embedded in is now non-flushing. This avoids e.g. triggering a material
update after the shader node tree changed in unrelated ways. Instead
the material has a flushing relation to the new `NTREE_OUTPUT` node now.
* The depsgraph no longer reports data block changes through to cycles
through `Depsgraph.updates` when only the node tree changed in ways
that do not affect the output.
Avoiding unnecessary updates seems to work well for geometry nodes and cycles.
The situation is a bit worse when there are drivers on the node tree, but that
could potentially be improved separately in the future.
Avoiding updates in eevee and the compositor is more tricky, but also less urgent.
* Eevee updates are triggered by calling `DRW_notify_view_update` in
`ED_render_view3d_update` indirectly from `DEG_editors_update`.
* Compositor updates are triggered by `ED_node_composite_job` in `node_area_refresh`.
This is triggered by calling `ED_area_tag_refresh` in `node_area_listener`.
Removing updates always has the risk of breaking some dependency that no
one was aware of. It's not unlikely that this will happen here as well. Adding
back missing updates should be quite a bit easier than getting rid of
unnecessary updates though.
Differential Revision: https://developer.blender.org/D13246
Outliner would frame the armature object instead of the bone if the bone
was on a hidden armature layer.
Similar to issues reported in e.g. T58068 and T80464, this is due to the
fact that `BKE_pose_channel_active` always checks for the armature layer
(and returns NULL if a bone is not on a visible armature layer).
Now propose to make this layer check **optional** (and e.g. from the
Outliner be more permissive). This also introduces
`BKE_pose_channel_active_if_layer_visible` which just wraps
`BKE_pose_channel_active` with the check being ON.
Maniphest Tasks: T92930
Differential Revision: https://developer.blender.org/D13154
Initialise the BKE callback system in
`BlendfileLoadingBaseTest::SetUpTestCase()`. This allows certain tests
to run in debug mode (when `BLI_assert` is enabled).
This happens because in `SEQ_time_update_sequence` function
`SEQ_get_meta_by_seqbase` returns uninitialized value. This isn't nice,
but it shouldn't happen in first place. Problem is, that
`SEQ_edit_strip_split` does move strips into detached `ListBase`, so
other functions can't see them anymore. Detached `ListBase` is used
solely to preserve relationships during duplication.
Move strips to original `ListBase` immediately after duplication and
return `NULL` if `SEQ_get_meta_by_seqbase` can't find meta strip.
Splitting itself can still rely on fact, that number of original and
duplicated strips is same and they are placed next to each other in
exactly same order at the end of original `ListBase`.
In this commit I changed many loops to range-based for loops.
I also removed some of the redundant iterator variables, using
indexing inside the loop instead. Generally an optimizing compiler
should have no problem doing the smartest thing in that situation,
and this way makes it much easier to tell where data is coming from.
I only changed the loops I was confident about, so there is still more
that could be done in the future.
Differential Revision: https://developer.blender.org/D13637
This was visible outside of camera view and was not respecting the
"Depth of Field" checkbox on the Camera properties.
Now return early if DoF should not be visible.
Maniphest Tasks: T94262
Differential Revision: https://developer.blender.org/D13631
Sculpt.c is now three files:
* Sculpt.c: main API methods and the brush stroke operator
* Sculpt_brushes.c: Code for individual brushes.
* Sculpt_ops.c: Sculpt operators other than the brush stroke operator.
TODO: split brush stroke operator into a new file (sculpt_stroke.c?).
The duplicated edges were caused by 'oversubdivided' edges, i.e. edges
where some of the vertices on them are only connected to two polygons.
The fix finds these vertices and 'dissolves' them so that only one edge
is created.
For most 'normal' meshes this shouldn't occurr, or only very little, so
the performance impact of this change should be neglegible. In practice
this is also avoidable by triangulating the mesh first.
Differential Revision: https://developer.blender.org/D13445
This fix provides better conditions for asserts in `NURBSpline::knots`
method accounting for cyclic NURBS curves.
Differential Revision: https://developer.blender.org/D13620
On a Ryzen 3700x, this ended up 2.5x faster than before. More
benchmarking details are included in the differential revision.
For smaller grids, all this should do is increase the
code size a bit, and add a few more if statements.
Differential Revision: https://developer.blender.org/D13617
There are two issues in USD code that break building it with gcc-11,
one (in `demangle.cpp`) was already fixed upstream, the other (in
`singularTask.h`) is still pending (reported upstream, see
https://github.com/PixarAnimationStudios/USD/issues/1721).
CC #platforms_builds_tests_devices project.
Root path variables for those libraries is now using the 'standard' naming
scheme.
With tweaks/cleanups from @mont29.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D13591
This was basically not implemented, do this via
`ED_autokeyframe_property` in a new dedicated function in
special_aftertrans_update.
Maniphest Tasks: T93570
Differential Revision: https://developer.blender.org/D13608
Differentiate doc-strings from title/section text.
Also use explicit doxygen references to struct members
so it's not ambiguous which member is being referenced.
Note that these changes aren't complete (some files weren't touched).
This moves `MOD_weld.cc` to C++, fixing compiler warnings
coming from the change. It also goes a little bit further and converts
the code to use C++ data structures: `Span`, `Array`, and `Vector`.
This makes the code more shorter and easier to reason about, and
makes memory maneagement more automatic.
Differential Revision: https://developer.blender.org/D13618
When dragging from the inputs of function nodes, other function
nodes wouldn't connect, because their socket declaration field types
weren't set correctly. Instead, they relied on code properly checking
the *node* declaration's `is_function_node()` method. However,
that increases complexity and requires passing the node instead of
just the socket in more places. Instead, set the proper field types
in the socket declaration during building.
Differential Revision: https://developer.blender.org/D13600
Before d56bbfea7b, nodes were updated (size calculated and
buttons added) in reverse order. Instead, now calculate the size of
frame nodes after all other nodes. Separating the drawing further
may be a good step to removing the O(n^2) loop later on.
This adds memory barriers to use with `GPU_memory_barrier` to ensure that
writes to a vertex or index buffer issued before the barrier are
completed after it, so they can be safely read later by another shader.
`GPU_BARRIER_VERTEX_ATTRIB_ARRAY` should be used for vertex buffers (`GPUVertBuf`),
and `GPU_BARRIER_ELEMENT_ARRAY` should be used for index buffers (`GPUIndexBuf`).
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D13595
Add a function that returns a list of keyframe segments
A segment being a continuous selection of keyframes
Will be used by future operators in the graph editor
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D13531
Ref: D13531
In the context of the dragdrop tooltip, the event referenced to the window
is out of date and contains invalid `mval` values.
Avoid using `win->eventstate` as much as possible.
The RNA setter now ensures that driver variables are uniquely named
(within the scope of the driver).
Versioning code has been added to ensure this uniqueness. The last
variable with the non-unique name retains the original name; this
ensures that the driver will still evaluate to the same value as before
this fix.
This also introduces a new blenlib function `BLI_listbase_from_link()`,
which can be used to find the entire list from any item within the list.
Manifest Task: T94116
Reviewed By: mont29, JacquesLucke
Maniphest Tasks: T94116
Differential Revision: https://developer.blender.org/D13594
The node group alpha theme was used for the overlay drawing in the node
editor. Since this was removed (919e513fa8) the alpha channel doesn't
need to be exposed anymore.
Reported as part of T93654.
The style guide mentions that unsigned integers shouldn't be used to
show that a value won't be negative. Many places don't follow this
properly yet. The modifier used to cast an array of `uint` to `int` in
order to pass it to `BLI_kdtree_3d_calc_duplicates_fast`. That is no
longer necessary.
Differential Revision: https://developer.blender.org/D13613
Using the `MEM_*` API from C++ code was a bit annoying:
* When converting C to C++ code, one often has to add a type cast on
returned `void *`. That leads to having the same type name three times
in the same line. This patch reduces the amount to two and removes the
`sizeof(...)` from the line.
* The existing alternative of using `OBJECT_GUARDED_NEW` looks a out
of place compared to other allocation methods. Sometimes
`MEM_CXX_CLASS_ALLOC_FUNCS` can be used when structs are defined
in C++ code. It doesn't look great but it's definitely better. The downside
is that it makes the name of the allocation less useful. That's because
the same name is used for all allocations of a type, independend of
where it is allocated.
This patch introduces three new functions: `MEM_new`, `MEM_cnew` and
`MEM_delete`. These cover the majority of use cases (array allocation is
not covered).
The `OBJECT_GUARDED_*` macros are removed because they are not
needed anymore.
Differential Revision: https://developer.blender.org/D13502
The patch fixes some misalignments in the nodes' sockets/options
recently introduced in 26d2caee3b, while maintaining the original
fix for T92268.
The original fix made the top padding always of the same size; while
that works when the first row of the other node is `Socket | Socket`,
it doesn't for other more common cases, `like Socket | Node Option`,
where the text results misaligned.
Differential Revision: https://developer.blender.org/D13451
The eraser checks the current, previous and next point (and sets pc0,
pc1 & pc2 corresponding to that for futher occlusion/brush/clipping
checks). For the very first point, it sets pc0 to pc1 [which makes sense,
there is no previous point, so we should assume the previous segment is
"visible" as soon as the first point is], but does so *before* pc1 is
even calculated. This makes following occlusion/brush/clipping checks
work with zero values [which leads to no earsing in most cases].
Now *first* calculate pc1, *then* set pc0 to pc1.
Maniphest Tasks: T94137
Differential Revision: https://developer.blender.org/D13593
The correct type should be set by invoke already, changing it to a non-
matching type (e.g. trying to remap Mesh users with a Camera block) does
not really make sense afaict, reason being that we would be presented
with the "Invalid old/new ID pair" message in such case anyways (code
checks GS(old_id->name) == GS(new_id->name)).
This alone wouldnt be a pressing issue, but since doing this with an
object ID type crashes atm., it seems to make sense to clean this up now
(of course the crash should be looked into, but this is for a separate
patch -- if that is solved, we could also think about adding the "Remap
Users" entry back in the context menu for objects as well [which was
removed in rB17bd5c9d4b1e for some reason]).
Part of T93799.
Differential Revision: https://developer.blender.org/D13512
The versioning code was accidentally put not at the very bottom.
That lead to a situation where it wasn't run on some files that happened
to be within a specific short time frame.
Since the versioning code is idempotent, it can just run again on existing
files. Therefore, this commit just moves it back to the bottom so that it
is executed on all files again.
Broken Commit: rB5b61737a8f41688699fd1d711a25b7cea86d1530.
Change the spelling of the QuickTime output video container item from
"Quicktime" to "QuickTime"
Differential Revision: https://developer.blender.org/D10929
Reviewed by Harley Acheson
Now that point clouds can be rendered with cycles, it makes sense
to allow assigning a material to them. Note that like volumes, they
only support a single material though.
This add support for rendering of the point cloud object in Blender, as a native
geometry type in Cycles that is more memory and time efficient than instancing
sphere meshes. This can be useful for rendering sand, water splashes, particles,
motion graphics, etc.
Points are currently always rendered as spheres, with backface culling. More
shapes are likely to be added later, but this is the most important one and can
be customized with shaders.
For CPU rendering the Embree primitive is used, for GPU there is our own
intersection code. Motion blur is suppored. Volumes inside points are not
currently supported.
Implemented with help from:
* Kévin Dietrich: Alembic procedural integration
* Patrick Mourse: OptiX integration
* Josh Whelchel: update for cycles-x changes
Ref T92573
Differential Revision: https://developer.blender.org/D9887
I need this for a refactor I'm looking into for bounding boxes.
It may be helpful in the future when using `CurveEval` in more places.
Differential Revision: https://developer.blender.org/D13596
Fully get rid of `BKE_collection_object_find` in
`lib_override_group_tag_data_object_to_collection_init`, even if only
used a few times this function was still noticeable in profiling data.
Now instead loop over collections' objects to build required
object-to-collections mapping.
Adds an extra 5-10% speed-up compared to previous commit rB0624fad0f3ff.
Related to T94059.
Operator was erroneously starting edge_slide operation.
Revert part of the changes in rB3fab16fe8eb4 as obedit_type was being
confused with object_mode.
`BKE_collection_object_find` has extremely bad performances (very high
time complexity). While ideally this should be fixed in that API, for
now cache its results once at the beginning of the resync/creation
process.
This makes loading of complex production files with a lot of
liboverrides to resync three to four times faster.
Thanks to @brecht for the profiling in T94059.
Not finding subitem when its name and index are invalid/unset is
expected behavior, and does happen when e.g. inserting a new constraint
or modifier at the begining of the stack.
When selecting the current undo step there is no need to do anything.
Fix and minor refactor to de-duplicate refreshing after running
undo/redo & undo history.
Both {key Alt} editing behavior as well as `Copy To Selected` were not
working on geometry nodes modifiers (even if these matched exactly -
having the same nodegroup - on multiple objects)
Reason is that code checks pointer equality on the discovered properties
[geometry nodes modifier properties are stored as ID properties], but
these are not the same across objects (since these are fetched from
NodesModifierSettings - which are different on different objects).
note: if general custom properties are "API defined" on existing classes,
this was working, we are getting the exact property for different IDs in
this case
Now be more permissive with ID properties not defined on classes in
general and dont check pointer equality for them. For ID properties on
specific IDs (not the ones defined on classes) this //might// be undesired
(havent spotted issues though, even if equally named ID properies with
different types existed -- this then simply does nothing).
For geometry nodes modifiers, new code also checks if the nodegroups are
the same [since generic naming "Input_XXX" is shared for all modifiers --
and starting to copy over things to unrelated modifiers is not desired
here].
Fixes T93983.
Maniphest Tasks: T93983
Differential Revision: https://developer.blender.org/D13573
This resolves an old TODO to deduplicate code in copy_to_selected_button
& ui_selectcontext_begin.
This is also in hindsight of adding id-property support [incl. Geometry
Nodes modifier properties] for this in the next commit.
No behavior change expected here.
ref T93983 & D13573
`<some_id>.keyframe_insert()` now sends a notifier that animation data
was changed, so that animation-related editors can properly refresh.
Since this function is quite high-level (if necessary it creates the
Action and FCurves), I thought this would be a suitable location for the
notifier. If high keyframing speed is required, it is still recommended
to use `FCurveKeyframePoints.insert(options={'FAST'})` instead.
Saving with only a filename (from Python) wasn't being prevented,
while it would successfully write the file to the working-directory,
path remapping and setting relative paths wouldn't work afterwards
as `Main.filepath` would have no directory component.
Disallow this since it's a corner case which only ever occurs
when path names without any directories are used from Python,
the overhead of expanding the working-directory for all data saving
operations isn't worthwhile.
The following changes have been made:
- bpy.ops.wm.save_mainfile() without a filepath argument
fails & reports and error when the file hasn't been saved.
Previously it would write to "untitled.blend" and set the
`G.main->filepath` to this as well.
- bpy.ops.wm.save_mainfile(filepath="untitled.blend")
fails & reports and error as the filename has no directory component.
- `BLI_path_is_abs_from_cwd` was added to check if the path would
attempt to expand to the CWD.
Revert part of the fix from 073669dd85
that initialized the file-path on first save as it's no longer needed.
Also remove relbase argument to BLI_path_normalize as the destination
file paths shouldn't use relative locations.
Currently, most node buttons are defined in `drawnode.cc` however,
this is inconvenient because it requires editing many files when adding new nodes.
The goal is to minimize the number of files needed to add or update a node.
This commit moves most of the node layout functions for composite nodes into their respected
`source/blender/nodes/composite/nodes` file.
In the future, these functions will be simplified to `node_layout` once files have their own namespace.
See {D13466} for more information.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D13523
In almost all cases there is no difference between `G.relbase_valid`
and checking `G.main->filepath` isn't an empty string.
In many places a non-empty string is already being used instead of
`G.relbase_valid`.
The only situation where this was needed was when saving from
`wm_file_write` where they temporarily became out of sync.
This has been replaced by adding a new member to `BlendFileWriteParams`
to account for saving an unsaved file for the first time.
Reviewed By: brecht
Ref D13564
Some nodes didn't check the type of the link's socket for filtering.
Do this with a combination of manually calling the node tree's validate
links function and using the helper function for declarations.
Also clean up a few cases that added geometry sockets manually
when they can use the simpler helper function.
This patch removes no-op node editor preview code (`PR_NODE_RENDER`)
and most calls to `BKE_node_preview_init_tree`. The only remaining call is
in the compositor.
- Shader nodes previews don't seem to do anything.
- In-node previews for the texture node system doesn't work either.
This is a first step to refactoring to remove `preview_xsize`,
`preview_ysize`, and `prvr` from nodes in DNA, aligned with
the general goal of removing runtime/derived data from data
structs.
Differential Revision: https://developer.blender.org/D13578
This commit adds a search menu when links are dragged above empty
space. When releasing the drag, a menu displays all compatible
sockets with the source link. The "main" sockets (usually the first)
are weighted above other sockets in the search, so they appear first
when you type the name of the node.
A few special operators for creating a reroute or a group input node
are also added to the search.
Translation is started after choosing a node so it can be placed
quickly, since users would likely adjust the position after anyway.
A small "+" is displayed next to the cursor to give a hint about this.
Further improvements are possible after this first iteration:
- Support custom node trees.
- Better drawing of items in the search menu.
- Potential tweaks to filtering of items, depending on user feedback.
Thanks to Juanfran Matheu for developing an initial patch.
Differential Revision: https://developer.blender.org/D8286
Previously we used a `CellValue` class to hold the data for a cell,
and called a function to fill it whenever necessary. This is an
unnecessary complication when we have virtual generic arrays
and most data is already easily accessible that way anyway.
This patch removes `CellValue` and uses `fn::GVArray` to provide
access to data instead.
In the future, if rows have different types within a single column,
we can use a `GVArray` of `blender::Any` to interface with the drawing.
Along with that, the use of virtual arrays made it easy to do a
few other cleanups:
- Use selection domain interpolations from rB5841f8656d95
for the mesh selection filter.
- Change the row filter to only calculate for necessary indices.
Differential Revision: https://developer.blender.org/D13478
The constructor of MemoryProxy initializes 3 of 4 instances variables.
If a MemoryProxy is constructed and MemoryProxy::free is called
on this instance, buffer_ is undefined and 'delete buffer_;' causes errors.
Although this misuse pattern does not exist in the current codebase
it already tripped up the Address Sanitizer on various occasions
while debugging unrelated problems.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D13569
This adds a bool field selection input to the Attribute Statistics node.
This is useful for running calculations on a subset of the input field data
rather that then whole set.
Differential Revision: https://developer.blender.org/D13520
bda9e4238a changed smooth-view
not to redraw when there were no changes made.
Redrawing is needed for repositioning the cursor.
Subscribe to changes to the 3d cursor to ensure all view ports
are updated (not just the current one).
Double the allocation size when the limit is reached instead of
increasing by a fixed number.
Also re-allocate to the exact size once complete instead of over
allocating. This gives a minor speedup in my tests ~19% faster
tessellation for ~1million faces.
This broke "test_undo.view3d_multi_mode_select" test in
"lib/tests/ui_simulate" and is likely exposed by recent changes to
bounding box calculation.
The missing check for DL_INDEX4 dates back to code from 2002 which
intended to check this but was checking for DL_INDEX3 twice
which got removed as part of a cleaned up.
This could be hidden from memory checking tools as meta-balls
over-allocate vertex arrays.
This is basically the same as rBee4ed99866fbb7ab04, the fix is
simply to check if the spline has evaluated points when deciding
the offsets into the result points array.
Fix an error if "File Preview Type" is "Auto" and there is no screen.
See D13574 for details.
Differential Revision: https://developer.blender.org/D13574
Reviewed by Julian Eisel
Whenever an exception happens in VR session code, we cancel the entire
session. Alongside that, we removed the "surface" item used to draw into
an offscreen context. This would mess up the iterator of the surface
draw loop.
Similar to 7afd84df40.
Whenever an exception happens in VR session code, we cancel the entire
session. Alongside that, we removed the "surface" item used to draw into
an offscreen context. But this may still be stored as active surface,
leading to a use-after-free when deactivating this active surface, for
example.
This replaces lost functionality from the old GN Attribute Map Range node.
This also adds vector support to the shader version of the node.
Notes:
This breaks forward compatibility as this node now uses data storage.
Reviewed By: HooglyBoogly, brecht
Differential Revision: https://developer.blender.org/D12760
Code is simpler when the uiBlocks used during drawing are simply
stored in an array. Additionally, looping can be simpler when we use
an vector to hold a temporary copy of the tree's linked list of nodes.
This patch also slightly changes how uiBlocks are "named" in
`node_uiblocks_init`. Now it uses the node name instead of the
pointer, which is helpful so we rely less on the node's address.
Differential Revision: https://developer.blender.org/D13540
This commit refactors the way the socket lists for group nodes,
and group input/output nodes are verified to match the group's
interface.
Previously the `bNodeSocket.new_sock` pointer was used to
temporarily mark the new sockets. This made the code confusing
and more complicated than necessary.
Now the old socket list is saved, and sockets are moved directly from
the old list to a new list if they match, or a new socket is created
directly in the new list.
This change is split from D13518, which aims to remove the `new_node`
and `new_sock` pointers. In the future this code might be removed
entirely in favor of using node socket declarations.
Differential Revision: https://developer.blender.org/D13543
This patch refactors the instance-realization code and adds new functionality.
* Named and anonymous attributes are propagated from instances to the
realized geometry. If the same attribute exists on the geometry and on an
instance, the attribute on the geometry has precedence.
* The id attribute has special handling to avoid creating the same id on many
output points. This is necessary to make e.g. the Random Value node work
as expected afterwards.
Realizing instance attributes has an effect on existing files, especially due to the
id attribute. To avoid breaking existing files, the Realize Instances node now has
a legacy option that is enabled for all already existing Realize Instances nodes.
Removing this legacy behavior does affect some existing files (although not many).
We can decide whether it's worth to remove the old behavior as a separate step.
This refactor also improves performance when realizing instances. That is mainly
due to multi-threading. See D13446 to get the file used for benchmarking. The
curve code is not as optimized as it could be yet. That's mainly because the storage
for these attributes might change soonish and it wasn't worth optimizing for the
current storage format right now.
```
1,000,000 x mesh vertex: 530 ms -> 130 ms
1,000,000 x simple cube: 1290 ms -> 190 ms
1,000,000 x point: 1000 ms -> 150 ms
1,000,000 x curve spiral: 1740 ms -> 330 ms
1,000,000 x curve line: 1110 ms -> 210 ms
10,000 x subdivided cylinder: 170 ms -> 40 ms
10 x subdivided spiral: 180 ms -> 180 ms
```
Differential Revision: https://developer.blender.org/D13446
We often had to use two `FieldEvaluator` instances to first evaluate
the selection and then the remaining fields. Now both can be done
with a single `FieldEvaluator`. This results in less boilerplate code in
many cases.
Performance is not affected by this change. In a separate patch we
could improve performance by reusing evaluated sub-fields that are
used by the selection and the other fields.
Differential Revision: https://developer.blender.org/D13571
Dead-lock when VR viewport drawing and depsgraph updates would fight for
the draw-manager GL lock. This didn't usually cause issues because the
depsgraph would be evaluated at this point already, except in rare
exceptions like after file writing.
Fix this by ensuring the XR surface gets its depsgraph updated after
handling notifiers, which is where regular windows also do the depsgraph
updating.
- Nest compositor pages under the compositor module
- Nest GUI, DNA/RNA & externformats modules under Blender.
- Remove modules from intern which no longer exist.
- Add intern modules (atomic, eigen, glew-mx, libc_compat, locale,
numaapi, rigidbody, sky, utfconv).
- Use 'intern_' prefix for intern modules since some of the modules
use generic terms such as locale & atomic.
Audio PTS was reset for each new file. This caused misalignment of video
and audio streams. In Blender, these files can't be loaded, other
players will fail to align audio and video.
Since timestamps are reset intentionally, reset also video stream
timestamps.
There were other bugs:
After timestamp was reset for audio, write_audio_frames started
encoding from timeline start until target frame, so each split video
had more audio than it should.
Also audio for last frame before splitting was written into new file.
Differential Revision: https://developer.blender.org/D13280
Since 88c02bf826 FFmpeg handles are freed if image is not displayed.
This change did not work correctly if strips are inside meta strip,
because overlap did not consider meta strip boundary, only strips inside
of meta strip.
Pass frame range to `sequencer_all_free_anim_ibufs`, if strip is inside
of meta strip, frame range is reduced to fit meta strip boundary, but if
meta strip is being edited, range must be set to +/-`MAXFRAME`,
otherwise playback performance would be too bad.
The difference between G.save_over and G.relbase_valid was minor.
There is one change in functionality. When saving the default-startup
file from an already loaded blend file - future save actions will
continue to write to the originally loaded file instead of prompting
the user to select a location to save the file.
This change makes saving the startup file behave the same way
"Save a Copy" does.
Reviewed By: brecht
Ref D13556
This fixes crash T94022 when selecting live viewport render with both GPU & CPU devices selected. It is caused by incorrect `KernelBVHLayout` assignment. Similar to `BVH_LAYOUT_MULTI_OPTIX` for Optix, this patch adds a `BVH_LAYOUT_MULTI_METAL` to correctly redirect to the correct Metal BVH layout type.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D13561
There were a few unused enum values: `CU_CARDINAL` and `CU_BSPLINE`
This commit cleans them up from code as they were not used for
anything meaningful.
Differential Revision: https://developer.blender.org/D13554
This builds off of rBf951aa063f7, adding a weight parameter which can
be used to change the order of items when they have the same match
score. In the future, if string searching gets a C++ API, we could
use an optional parameter for the weight, since it is not used yet.
This will be used for the node link drag search menu (D8286).
Differential Revision: https://developer.blender.org/D13559
This patch adds a randomize factor for the start/end lengths in the Length modifier.
Reviewed By: #grease_pencil, antoniov, pepeland, HooglyBoogly
Differential Revision: https://developer.blender.org/D12928
his new modifier is equals to the existing mesh modifier but adapted to grease pencil.
The underlying functions used to calculate the shrink are the same used in meshes.
{F11794101}
Reviewed By: pepeland, HooglyBoogly
Differential Revision: https://developer.blender.org/D13192
This adds the remaining bits to enable Metal on macOS. There are still
performance optimizations and other improvements planned, but it should
now be ready for early testing.
This is currently only enabled on in Arm builds for M1 GPUs. It is not
yet working on AMD or Intel GPUs.
Ref T92212
Differential Revision: https://developer.blender.org/D13503
Resolving the path to a missing pose-bone (for example),
was not raising an error as it should have.
Regression introduced in f9ccd26b03,
which didn't update collection lookup logic to fail in the case the
key of a collection wasn't found.
This implements an optimization pass for multi-function procedures.
It optimizes memory reuse by moving destruct instructions up.
For more details see the in-code comment.
In very large fields with many short lived intermediate values, this change
can improve performance 3-4x. Furthermore, in such cases, peak memory
consumption is reduced significantly (e.g. 100x lower peak memory usage).
Differential Revision: https://developer.blender.org/D13548
This came with {rBf8a0e102cf5e}.
The panel was meant specifically for the gradient tool, but since it was
given the ".weighpaint" context, it would also draw as part of generic
header toolsettings drawing.
Now remove this context on purpose and only draw this specifically from
the gradient tools ToolDef.
Maniphest Tasks: T93169
Differential Revision: https://developer.blender.org/D13268
Use "filepath" which is the current convention for naming full paths.
- Main use "name" which isn't obviously a file path.
- BlendFileData & FileGlobal used "filename" which is often
used for the name component of a path (without the directory).
These arguments must be non-null for useful functionality,
there is no need for paranoid checks.
The return value in case of invalid input for BPY_run_string_as_number
was also wrong (casting -1 to a bool, when false was expected).
Point cloud is two separate words, this just changes comments in
a few places where we were inconsistent. A small wording change
to another comment is also included.
This reduces the number of separate memory allocations done
by the multi-function procedure executor (which is used by the
field evaluation).
Now a linear memory allocator is used to allocate all intermediate
values. Furthermore, more buffers are reused when possible. This
reduces the total amount of allocated memory and improves
cache efficiency because the values are more likely to be in cache
already.
The performance improvement of this patch are most noticable
when few elements are processed by many functions. The situation
will improve even more with D13548, because then buffers can actually
be reused in practice. I measured up to 20% faster field evaluation
in extreme cases with this change.
This patch exposes the vector handle options as buttons
and aligns the UI between CurveMap and CurveProfile more closely.
- CurveMap point editing is on a single row like CurveProfile
- Tools menu is moved to the right hand side on both widgets
- Emboss curve map buttons
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D10980
Replaces `HOME` environment variable usage for user
directories like in D12802.
Reviewed By: #platform_macos, brecht
Differential Revision: https://developer.blender.org/D13212
Early return in some places also.
De-duplicate getSystemDir and getUserDir also.
Reviewed By: #platform_macos, brecht
Differential Revision: https://developer.blender.org/D13211
Calling `foreach_field_input` on a highly nested field (we do that
often) has an exponential running time in the number of nodes.
That is because the same node may be visited many times.
This made Blender freeze on some setups that should work just fine.
Now every field keeps track of its inputs all the time. That replaces
the exponential algorithm with constant time access.
This allows to use fewer evaluations (30 msec down to 23 for me) while giving more accurate results (3x-10x less relative absolute error) compared to classic ray marching.
Not a massive difference, but meh, it's better. For Cycles the speedup doesn't really matter much, but I also have a patch for Eevee support.
I've also tried Gauss-Legendre and Gauss-Lobatto - the latter was always worse, while the former was slightly better at 2deg elevation but notably worse on 15deg.
Unfortunately the same approach can't be used for the integration along the primary ray, since there we also need the accumulated transmission so far at every integration point, not just the total result.
Differential Revision: https://developer.blender.org/D13521
The const argument makes sense because these are the "source"
sockets, even though a const cast is necessary at one point.
The name "interface_socket" is an improvement over "stemp"
because the latter sounds like "temporary", or it confuses
the old socket template system with a node group's interface.
I assume this `butr` rectangle was used more in the past,
but currently its value is set and used less than 10 lines apart,
so it's trivial to remove 16 bytes from every node. The other
rectangles are also runtime data and could be removed, but
they are more difficult.
This reverts commit 943aed0de3 and f76e04bf4d
The latter caused a test failure: `sequencer_render_transform`
Reverting since the fix is not obvious (to me), and people are
away for the weekend.
Most of the fields in Mesh had no comments, or outdated misleading
comments. For example, "BMESH ONLY" referred to the BMesh project,
not the data structure. Given how much these structs are used, it should
save a lot of time to have proper comments.
I also rearranged the fields in mesh to have a more logical order. Now
the most important fields come first. In the process I was able to
remove 19 bytes of unnecessary padding (31->12). I just had to
change a `short` flag to `char`.
Differential Revision: https://developer.blender.org/D13454
The defrag shader make sure the free heap is free of holes. Making
the allocation more straightforward.
Since we now only reference the pages using the tiles, we introduce
a debug shader that produces an image with page data in a visual way.
This replaces the debug 8 option.
This also fixes some bug that were still present in the pipeline.
This patch replaces `round_fl_to_int` with `floor` and adjusts the
maximum value accordingly. The call to `round_fl_to_int` is problematic
here because it messes with the probability distribution at the edges
of the value range, meaning the first and last values were only half
as common as all other values. Since `round_fl_to_int` does
`floor(val + 0.5)`, it will not introduce misbehavior in edge cases.
Differential Revision: https://developer.blender.org/D13474
Improvement of the IMB_transform function by separating the UVWrapping
method from the color interpolation function. This would allow us to
perform uv wrapping operations separate from the interpolation function.
Currently this wrapping is only supported when interpolating colors.
This change would allow us to perform it on non-color image buffers.
Reduce the inner loop of IMB_transform by extracting writing to an
output buffer in a template. This reduces a branch in the inner loop and
would allow different number of channels in the future.
Some doc-strings were skipped because of blank-lines between
the doc-string and the symbol and needed to be moved manually.
- Added space below non doc-string comments to make it clear
these aren't comments for the symbols directly below them.
- Use doxy sections for some headers.
Ref T92709
When loading huge images (30k) blender crashed with a buffer overflow.
The reason is that determine the length of a buffer was done in 32bit
precision and afterwards stored in 64 bit precision.
This patch adds a new function to do the correct calculation in 64bit.
It should be added to other sections in blender as well. But that should
be tested on a per case situation.
When rendering volume surfaces in unbounded worlds the volume stepping can produce large values. If used with a magic texture node the values can results in a Inf float which when used in a sin or cos produces a NaN.
To fix this the input values are mapped into the periodic range of the sin and cos functions (-2*PI 2*PI) this stops the possibility of a Inf occurring and thus the NaN. It also improves the accuracy and smoothness of the result due to loss of precision when large values are summed with smaller ones effectively removing the parts of the smaller number (i.e. those in the -2PI to 2PI range) that result in variation of the output of sin and cos.
Reviewed By: brecht
Maniphest Tasks: T92036
Differential Revision: https://developer.blender.org/D12821
- Added space below non doc-string comments to make it clear
these aren't comments for the symbols directly below them.
- Use doxy sections for some headers.
Ref T92709
In the `replace_mesh`/`replace_curve` etc. methods, the component
was retrieved with write access. Retrieving with write access will
duplicate the data if the component has another user. This means that
the replaced geometry data was often duplicated just to be deleted
a moment later.
I expect this would have a large impact in performance in some specific
situations when dealing with large geometry. In a scene with many small
meshes though, I didn't observe a significant difference.
This also makes replacing a geometry set's data with the same data
that's already in the set safe. It would be valid to assert for that
case instead, but this seems safer.
Differential Revision: https://developer.blender.org/D13530
I'm planning to make these functions slightly more complicated,
and it makes sense to return early when checking one of the parameters
for null anyway.
Sample offset was not accounted for in the adaptive sampling code and caused
issues, like immediately applied adaptive filtering, with non-zero values.
Differential Revision: https://developer.blender.org/D13510
This patch adds support for merging images rendered with adaptive sampling to
the merge operator (which is currently only exposed in the Python API).
To do this an sample count buffer is created for each render layer from the
sample count pass if it exists, or from the metadata otherwise. This is then
used for averaging passes.
Differential Revision: https://developer.blender.org/D13457
Use structured binding and for-each loop, remove reduntant type casts, use
find_if instead of loop.
Differential Revision: https://developer.blender.org/D13456
This node outputs the current scene time in seconds or in frames.
Use of this node eliminates the need to use drivers to control values
in the node tree that are driven by the scene time.
Frame is a float value to provide for subframe rendering for motion
blur.
Differential Revision: https://developer.blender.org/D13455
The corresponding vertex group was renamed properly, but the armature
influence was broken for that bone.
Caused by {rB3b6ee8cee708}.
Since above commit, vertex group names are stored on object data (mesh/
lattice/gpencil) and if we update these, we have to inform dependency
graph to have immediate effect.
Maniphest Tasks: T93892
Differential Revision: https://developer.blender.org/D13526
This was an issue with the mixed list of external assets and assets from
the current file. When closing the File Browser to select the custom
preview image, the assets from the current file would be cleared for
reread, to make sure we display up-to-date file data. That is because
the workspace of the temporary File Browser was deleted, causing a
change in the file data (main data-base). The reread would happen in a
background thread, meaning it might not finish before the custom preview
operator runs and queries the active asset. So the preview operator
would get the wrong active asset from context.
Two fixes were needed:
* Make sure current file data is reread before the operator runs, by
doing this partial rereading on the main thread.
* Ensure the asset list (in fact file list) order stays consistent over
rereads. If multiple assets with the same name were shown, the
operator might also have gotten the wrong asset, also leading to a
crash.
Additionally the file operation handler should probably poll before
executing, to fail gracefully at least (not crash).
A crash happened when `instance_id_attribute` further down in the
function was null. This issue was probably introduced when the
id attribute starting using generic attribute handling.
* Correct URL for documentation (was changed recently).
* Add comments.
* Reevaluate and update which functions are public, protected or
private.
* Reorder functions and classes to be more logical and readable.
* Add helper class for the public item API so individual functions it
uses can be made protected/private (the helper class is a friend).
Also allows splitting API implementation from the C-API.
* Move internal layout builder helper class to the source file, out of
the header.
* More consistent naming.
* Add alias for item-container, so it's more clear how it can be used.
* Use const.
* Remove unnecessary forward declaration.
Adds some basic high-level explanations for editor/UI level asset APIs.
Also moves one such comment from the source file to the header file,
so it's in the same file as other API comments.
Autocomplete entires keep track of the length of the prefix
in `name_prefix_offset`. However, the name matching logic
was comparing the string including the prefix which resulted
in tab-completion not working (when the user didn't also type
in the prefix, typically two whitespaces).
This is fixed by passing in a char pointer after the end of
the prefix.
Additionally, some searchbox logic is moved. Previously,
`ui_searchbox_apply` would clear the entry which would mean
that `ui_searchbox_find_index` would never succeed. Now the
search box is only cleared if no match was found.
Differential Revision: https://developer.blender.org/D13483
- Added space below non doc-string comments to make it clear
these aren't comments for the symbols directly below them.
- Use doxy sections for some headers.
- Minor improvements to doc-strings.
Ref T92709
Adds hysteresis to the resolution divider algorithm to avoid having the resolution bounce around when on the boundary of two resolutions.
Reviewed By: brecht, leesonw
Differential Revision: https://developer.blender.org/D12385
Float precision issues cause the `ED_view3d_win_to_3d_on_plane` to return
a value even when the view ray is parallel to the plane.
A more general solution might be desired in this case, as other areas that
use `ED_view3d_win_to_3d_on_plane` might have the same problem.
For now, just work around the problem for the snap cursor.
Fixes a memory leak introduced by D13225.
Caused by not freeing the hash-map in some cases.
Differential Revision: https://developer.blender.org/D13432
The issue here was that after the seek table check, the underlying file wasn't
rewound to the start, so the code that checks for the BLENDER header
immediately reaches EOF and fails.
Since Blender always writes files with a seek table, this bug isn't triggered
by files saved in Blender itself. However, files compressed in external tools
generally don't have a seek table.
This separate the handling of directional lights (sun) into their
own loops. This will help reduce register pressure and remove some
pollution of the local light culling.
All sun lights are packed at the start of the light array.
If a transform operator is executed as modal and has a "value" set, that value works as an offset.
However few transform modes were supporting this.
Include more transform modes as supported.
This node is a field input that outputs a separate index for each mesh island.
The indices are based on the order of the lowest-numbered vertex in each island.
Authoring help from @hooglyboogly
Differential Revision: https://developer.blender.org/D13504
Caused by {rB3b6ee8cee708}
The raw data is copied here correctly
[`BKE_gpencil_stroke_weights_duplicate` in
`BKE_gpencil_stroke_duplicate`] but the vertex groups names are missing.
Prior to above commit is was enough to have `ED_object_add_duplicate`
(this seemingly took care of duplicating object's defbase).
Now vertex groups names sit on the `bGPdata` rather than the `Object`,
and since the separate operation creates **new** `bGPdata` we have to
copy vertex groups names - and active index - over [via
`BKE_defgroup_copy_list`].
Maniphest Tasks: T93728
Differential Revision: https://developer.blender.org/D13509
This patch suppresses OS version warnings and hides currently unsupported Metal GPUs when enumerating devices.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D13506
eed48a7322 caused the `SnapObjectParams` to be stored in the `SnapObjectContext`.
As this pointer is always passing in stack memory, so it seems error prone to keep a reference to this in `SnapObjectContext` since failure to set this will reference undefined stack memory.
So avoid this by moving params out of `SnapObjectContext`.
Differential Revision: https://developer.blender.org/D13401
Though the interfacing with `rctf` becomes slightly more complicated,
this should be more helpful as more of this code usese `float2` instead
of two separate floats.
We now scan the depth buffer after the prepass to tag the needed
shadow tiles.
This is much more precise than the bound box tagging which is now
reserved for transparent objects.
This also:
- fix pixel radius size.
- add a dedicated info buffer to avoid having one unused tile.
This reverts commit 5e37f70307.
It is leading to freezing of the entire desktop for a few seconds when stopping
3D viewport rendering on my Linux / NVIDIA system.
This allows real world cameras to be modeled by specifying the coordinates of a
4th degree polynomial that relates a pixels distance (in mm) from the optical
center on the sensor to the angle (in radians) of the world ray that is
projected onto that pixel.
This is available as part of the panoramic lens type, however it can also be
used to model lens distortions in projective cameras for example.
Differential Revision: https://developer.blender.org/D12691
This included is needed for the `ATTR_NONNULL` macro used in the header.
As found in a recent c --> c++ if the includes get ordered in a different order
this could result in an error.
Re commits rBc20098e6ec6adee874a12e510aa4a56d89f92838
This adds a bit more information to `GeometrySet` and each of the
geometry components. There is probably still more that can be written,
but this includes the most important information that I could think of.
I'd like to include some more general information about the
attribute API in a separate patch.
Differential Revision: https://developer.blender.org/D13501
The root of the issue is caused by Cycles ignoring OpenGL limitation on
the maximum resolution of textures: Cycles was allocating texture of the
final render resolution. It was exceeding limitation on certain GPUs and
driver.
The idea is simple: use multiple textures for the display, each of which
will fit into OpenGL limitations.
There is some code which allows the display driver to know when to start
the new tile. Also added some code to allow force graphics interop to be
re-created. The latter one ended up not used in the final version of the
patch, but it might be helpful for other drivers implementation.
The tile size is limited to 8K now as it is the safest size for textures
on many GPUs and OpenGL drivers.
Differential Revision: https://developer.blender.org/D13385
* Don't link embree / OSL when WITH_CYCLES is disabled
* Simplify lite config by disabling Cycles as a whole using this
* Remove code handling the removed WITH_CYCLES_NETWORK option
Somehow only a part of rBf4f8b6dde32b0438e0b97a6d8ebeb89802987127 ended up in
Cycles X, causing the issue that commit fixed, "OPTIX_ERROR_INVALID_VALUE" when the
system is out of memory, to show up again.
This adds the missing changes to fix that problem.
Maniphest Tasks: T93620
Differential Revision: https://developer.blender.org/D13488
Creates a new Edge Neighbors node which outputs a field
containing the number of faces connected to each edge.
Differential Revision: https://developer.blender.org/D13493
This patch adds the Metal host-side code:
- Add all core host-side Metal backend files (device_impl, queue, etc)
- Add MetalRT BVH setup files
- Integrate with Cycles device enumeration code
- Revive `path_source_replace_includes` in util/path (required for MSL compilation)
This patch also includes a couple of small kernel-side fixes:
- Add an implementation of `lgammaf` for Metal [Nemes, Gergő (2010), "New asymptotic expansion for the Gamma function", Archiv der Mathematik](https://users.renyi.hu/~gergonemes/)
- include "work_stealing.h" inside the Metal context class because it accesses state now
Ref T92212
Reviewed By: brecht
Maniphest Tasks: T92212
Differential Revision: https://developer.blender.org/D13423
This adds a new Geometry to Instance node that turns every
connected input geometry into an instance. Those instances
can for example be used in the Instance on Points node.
Differential Revision: https://developer.blender.org/D13500
The type conversions do not depend on other files in the nodes
module. Furthermore we want to use the conversions in the
geometry module without creating a dependency to the
nodes module there.
The `node_storage` functions to retrieve const and mutable structs
from a node are generated by a short macro that can be placed at the
top of each relevant file. I use this in D8286 to make code snippets
in the socket declarations much shorter, but I thought it would be
good to use it consistently everywhere else too.
The functions are also useful to avoid copy and paste errors,
like the one corrected in the cylinder node in this commit.
Differential Revision: https://developer.blender.org/D13491
Use the World viewport color when rendering pose library previews.
The World's viewport color is chosen instead of the World shading nodes,
as the latter would require rendering with `OB_RENDER` (instead of
`OB_SOLID`), which would take considerably longer.
Manifest Task: T93467
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D13470
This reverts to following commits:
* rB5cad004d716da02f511bd34983ac7da820308676
* rB97e3a2d935ba9b21b127eda7ca104d4bcf4e48bd
* rBf60b95b5320f8d6abe6a629fe8fc4f1b94d0d91c
* rB0bd3cad04edf4bf9b9d3b1353f955534aa5e6740
* rBf72cc47d8edf849af98e196f721022bacf86a5e7
* rB3f7014ecc9d523997062eadd62888af5fc70a2b6
* rB0578921063fbb081239439062215f2538a31af4b
* rBc20098e6ec6adee874a12e510aa4a56d89f92838
* rBd5efda72f501ad95679d7ac554086a1fb18c1ac0
The original move to c++ that the other commits depended upon had some issues
that should be fixed before committing it again. The issues were reported in
T93797, T93809 and T93798.
We should also find a better rule for not using c-style casts going forward,
although that wouldn't have been reason enough to revert the commits.
Introducing something like a `MEM_new<T>` and `MEM_delete<T>`
function might help with the the most common case of casting the return
type of `MEM_malloc`.
Going forward, I recommend first committing the changes that don't
require converting files to c++. Then convert the shading node files
in smaller chunks. Especially don't mix fairly low risk changes like
moving some simple nodes, with higher risk changes.
Error in d5efda72f5. Was changing an iteration that would free items
to an iterator that is not safe for use in such cases.
There still seem to be significant issues with the rendering, but that's
a separate issue to be fixed.
Issue is that external engine uses the gpu info. but overwrote the
instance data. The draw manager would then detect instance data and
required the engine type to have a instance free callback.
The solution is to save some space in the engine data to hold an empty
and unused instance_data attribute to comply with `ViewportEngineData`
struct.
In the original design draw engines had to copy with a limitation that
they were not allowed to reuse complex data structures between drawing
calls. Data that could be reused were limited to:
- GPUFramebuffers
- GPUTextures
- Memory that could be removed calling MEM_freeN (storage list)
- DRWPass
This is fine when the storage list contains arrays or structs but when
more complex data types (vectors, maps) etc wasn't possible.
This patch adds instance_data that can be reused between drawing calls.
The instance_data is controlled by the draw engine and doesn't need to
be limited as described above.
When an engines stores instance_data it must implement the
`DrawEngineType.instance_free` callback to free the data.
The patch originates from eevee rewrite. But was added to master as the
image engine rewrite also has a need for it.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D13425
Dirty regions when painting are not using rcti. Meaning less
understandable code. Found issue when refactoring the image_gpu partial
update. In a future change gpu partial update API will be using rcti
also what makes the code even cleaner.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D13260
- Added space below non doc-string comments to make it clear
these aren't comments for the symbols directly below them.
- Use doxy sections for some headers.
- Minor improvements to doc-strings.
Ref T92709
The line that sets the factor_prop in graph_slider_ops.c
has been left in the common invoke function by accident.
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D13477
Ref: D13477
This improves both code finding, for example "color ramp" now has its own file.
And now each node has its own namespace so function names can be simplified
similar to rBfab39440e94
This commit also makes all file names use snake case instead of camel case.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D13482
This flag is currently only used for vector sockets
so the function is limited to the vector builder.
The flag is only used by two shader nodes at the moment
and this is needed to port them over to the new socket declaration API.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D13490
Most of our field inputs are currently specific to geometry. This patch introduces
a new `GeometryFieldInput` that reduces the overhead of adding new geometry
field input.
Differential Revision: https://developer.blender.org/D13489
Creates 4 new nodes which provide topology information
for the mesh. Values are interpolated from the primary
domain in each case using basic attribute interpolation.
Vertex Neighbors
- Vertex Count
- Face Count
Face Neighbors
- Vertex Count
- Neighboring Face Count
Edge Vertices
- Vertex Index 1
- Vertex Index 2
- Position 1
- Position 2
Face Area
- Face Area
Differential Revision: https://developer.blender.org/D13343
The resample node didn't handle the case of when a spline didn't have
any evaluated points. For poly and Bezier splines we should never hit
this case, but it is expected when the number of NURBS control points
is smaller than its order, so we have to handle the case here.
It's not that obvious what to do in this case, there are a few options:
- Remove the bad splines from the result
- Generate empty splines for those inputs
- Skip resampling the bad splines, copy them to the result
- Arbitrarily generate single point splines
I chose option three, just skipping the "bad" splines. Since the node
already has a selection input, this can be described by just extending
that. "Splines with no evaluated points are implicitly deselected."
The first option would probably be valid too though.
Differential Revision: https://developer.blender.org/D13434
This commit adds the shader socket type to the new socket builder api.
As a test, this commit also converts the Add Shader node to the new API
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D13485
- Create a new `bf_nodes_shader` library
- Enable unity builds for `bf_nodes_shader`, gives abount a 2.7x speed up for compile times
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D13484
Use fixed-length string to convert `char[2]` to `std::string`. Otherwise
`strlen()` is called, which is problematic as the `char[2]` is not
zero-terminated.
Fix typos in the variables of the Xxf86vm libray to fix link failure
with bfd. These variables are defined in platform_unix.cmake.
Reviewed By: zeddb
Differential Revision: https://developer.blender.org/D12911
Earlier code assumed that the active strip was on the active track. This
commit detects when this assumption doesn't hold, and adds a more thorough
search of the active strip.
Caused by {rB3b6ee8cee708}
Above commit was trying to get the vertexgroup from the mesh that is
passed into `deformVertsEM` (but that can be NULL).
When can it be NULL, when is is non-NULL?
`editbmesh_calc_modifiers` only passes in a non-NULL mesh to
`deformVertsEM` under certain conditions:
- a non-deform-only modifier is handled currently
- a non-deform-only modifier preceeds the current modifier
- a deform-only modifier preceeds the current modifier (and the current
one depends on normals)
So the passed-in mesh cannot be relied on, now get the vertex group from
the context object data (like it was before the culprit commit).
Related commit: rB8f22feefbc20
Maniphest Tasks: T93611
Differential Revision: https://developer.blender.org/D13487
`ED_view3d_win_to_3d_on_plane` does not use the `clip_start` and
`clip_end` values of the scene, so the `do_clip` option can be misleading
especially in the orthographic view where the `clip_start` is negative.
For now, don't use the `do_clip` option in orthographic view.
Follow up on rB1df8abff257030ba79bc23dc321f35494f4d91c5
This puts all static functions in geometry node files into a new
namespace. This allows using unity build which can improve
compile times significantly
- The namespace name is derived from the file name.
That makes it possible to write some tooling that checks the names later on.
The filename extension (cc) is added to the namespace name as well.
This also possibly simplifies tooling but also makes it more obvious that this namespace is specific to a file.
- In the register function of every node, I added a namespace alias namespace `file_ns = blender::nodes::node_shader_*_cc`;.
This avoids some duplication of the file name and may also simplify tooling, because this line is easy to detect.
The name `file_ns` stands for "file namespace" and also indicates that this namespace corresponds to the current file.
In the future some nodes will be split up to separate files and given their own namespace
This will allow function names to be simplified similar to rBfab39440e94
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D13480
As a followup to 338c1060d5, apply the same change to the node
drawing callback. This helps to simplify code when the complexity
of a callback isn't necessary right now.
Until now the LOD selection was based on distance from camera.
Now it is based on receiver distance ratio. We compute the world
size of one view pixel along with the world size of one shadow texel.
By knowing one point distance to the light or to the view, we can
compute the pixel density ratio and deduce the corresponding LOD.
We use this to compute the min LOD during the visibility selection phase
and the "mean" LOD for usage tagging by BBoxes.
The tagging LOD is a crude approximation as it only uses the BBox
center.
Currently there are a few callbacks on `bNodeType` that do the same
thing for every node type except reroutes and frame nodes. Having a
callback for basic things complicates code and makes it harder to
understand, and reroutes and frames are special cases in larger way.
Arguably frame nodes shouldn't even be drawn like regular nodes,
given that it adds a case of O(N^2) looping through all nodes.
"Unrolling" the callbacks makes it easier to see what's happening,
and therefore easier to optimize.
Differential Revision: https://developer.blender.org/D13463
This will be useful in the future to use the new socket builder API
Aditional changes:
- Declare variables where initialized
- Do not use relative includes
Differential Revision: https://developer.blender.org/D13465
`GeometrySet` contains at most one component of each type.
Previously, a map was used to make sure that each component
type only exists once. The overhead of a map (especially with
inline storage) is rather large though. Since all component types
are known at compile time and the number of types is low,
a simple `std::array` works as well.
Some benefits of using `std::array` here:
* Looking up the component of a specific type is a bit faster.
* The size of `GeometrySet` becomes much smaller from 192 to 40 bytes.
* Debugging a `GeometrySet` in many tools becomes simpler because
one can easily see which components exists and which don't
The problem is that `current_mask` can become `selection.size()`.
The loop could also be refactored to break out of it when the end
of the selection is reached. This can be done separately.
This makes every shadow setup pass aware of the LOD chain of the tilemap
for each cubemap face.
In the free phase, we mask any LOD page that is completely covered by
higher LOD. This avoir commiting memory twice or more per area.
In the allocation phase, we check for the last valid LOD and set it
in the LOD 0 meta data. We also store the actual page location in LOD0 but
do not mark it as allocated as the LOD tile has the ownership of the page.
This patch leaves a out a few nodes:
- Group Nodes
- Image input node
- File output node
- Switch View
- Cryptomatte
These nodes above are a bit more complicated and should be worked on individually.
Differential Revision: https://developer.blender.org/D13266
This patch extracts the modal functions from GRAPH_OT_decimate
and makes them generic so they can be reused by future operators
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D9326
Ref: D9326
This removes the light count limit for the forward shaded object. This
also provides a more efficient way of computing the culling directly on
the GPU. Moreover, this avoids doing multiple lighting passes for high
light counts in the deferred pipeline, improving performance.
This helps to tell when a pointer is expected to be null, and avoid
overly verbose code when dereferencing. This commit also includes
a few other cleanups in this area:
- Use const in a few places
- Use `float2` instead of `float[2]`
- Remove some unnecessary includes and old code
The change can be continued further in the future.
`IMB_transform` is used in VSE. It had a required crop parameter
for cropping the source buffer. This is not always needed.
In the image engine we want to use the use the `IMB_transform`
with wrap repeat. Both options are mutual exclusive and due
to performance reasons the wrap repeat is only available when
performing a nearest interpolation.
Instead of using RPT_ERROR, use RPT_WARNING which will not raise an
exception to Python. This broke some scripts (including FBX import)
which already check for a None return value.
Ref D13458
Reviewed By: campbellbarton
This actually gives a quite nice behavior in my opinion, especially for
asset catalogs, where activating a catalog makes all assets inside it or
its (grand-)child catalogs visible, so showing the child catalogs then
adds useful information. Maybe this should become a feature for
asset catalogs only, to be evaluated once the tree-view API is used in
more cases. Only asset catalogs are affected by this change right now.
Part of T93582.
The "All" item will be expanded of course, and the tree will also be
expanded so that the active item is visible. But feedback was that in
some setups, opening all the top-level catalogs is a bit too much. So
collapse them for a more compact default layout.
Part of T93582.
Originally this wasn't really meant to stay there permanently, but
helped giving things a nicer alignment. Others seemed to like it at
first so it stayed, but after more feedback we decided to remove it
again. The alingment is better now with the previous commit.
Part of T93582.
Cycles preview rendering could free the image buffers being used by drawing in
another thread due to a race condition. This race condition was unlikely before,
but now that preview renders are started right before we draw the image in the
image editor or load it as a texture in the 3D viewport, it's likely to happen.
As we are close to release this is too risky to fix properly, just avoid freeing
the cache for preview renders instead and accept increased memory usage in some
cases.
The asset metadata custom property `["is_single_frame"]` was set
incorrectly. Since this is intended for forward compatibility, including
being covered by the asset metadata indexing, it's important to have it
set correctly from the first release of Blender that includes the asset
browser.
Differential Revision: https://developer.blender.org/D13452
The Ghost dependency was added to avoid a memory leak (rBc7a1e115b507),
but since that's only for the unit tests, it's better to add the path to
`TEST_INC`.
We often call `parallel_for` in places with very variable
sized workloads. When many elements are processed,
using multi-threading is great, but when processing
few elements (possibly many times) using `parallel_for`
can result in significant overhead.
I measured that this improves performance by >20% in
the refactored realize instances code I'm working on
separately. The change might also help with debugging
sometimes, because the stack trace is smaller and contains
fewer irrevelant symbols.
The OptiX denoiser does have an upper limit as to how many pixels it can denoise at once, so
this changes the OptiX denoising process to use tiles for high resolution images.
The OptiX SDK does have an utility function for this purpose, so changes are minor, adjusting
the configured tile size and including enough overlap.
Maniphest Tasks: T92308
Differential Revision: https://developer.blender.org/D13436
Since our design is to always keep data-blocks marked as assets on exit,
and our technical design for this is to do this via fake users, ensure
the fake user is set for an appended asset.
Reviewed by: Bastien Montagne
Differential Revision: https://developer.blender.org/D13443
The crash happened because I was incorrectly and inconsistently assuming
that a socket is part of at most one internal link. However, this is not the case.
In geometry nodes, an input socket can be internally linked to multiple
output sockets. In the general case, an output could also be linked to multiple
input sockets, even though we don't have that in Blender yet.
Dalai gave green light to cherry pick this fix for 3.0.
Instantiation is now fully handled by BKE_blendfile_link_append module.
Note that this also allows removal of the `BLO_LIBLINK_NEEDS_ID_TAG_DOIT`
flag.
Part of T91414: Unify link/append between WM operators and BPY context
manager API, and cleanup usages of `BKE_library_make_local`.
The crash happened because I was incorrectly and inconsistently assuming
that a socket is part of at most one internal link. However, this is not the case.
In geometry nodes, an input socket can be internally linked to multiple
output sockets. In the general case, an output could also be linked to multiple
input sockets, even though we don't have that in Blender yet.
Close all active buttons when hiding a region as this can be called
from Python a popover is open from that region.
Failure to do this causes the popover to read from the freed button.
Also rename UI_screen_free_active_but to
UI_screen_free_active_but_highlight since it only frees highlighted
buttons.
The small circle used to choose the hue/saturation and value in the
color widget was drawn with a fixed screen space size. Now scale the
circle used as cursor in the color widget based on the zoom. This
could have been part of a9642f8d61 but the implementation is
different.
Based on a fix provided by Erik Abrahamsson
Differential Revision: https://developer.blender.org/D13444
The group output node did not have the same size padding as the group
input, leading to the node looking different and actually being smaller.
Differential Revision: https://developer.blender.org/D13092
These existing names were unhelpful at best, actively confusing at
worst. This patch renames them to be consistent with the terms
used to refer to the values in the UI.
- `width` -> `offset`
- `ext1` -> `extrude`
- `ext2` -> `bevel_radius`
Differential Revision: https://developer.blender.org/D9627
This was overlooked, as it seems there's no way for these strings to be
translated currently. Generally it's not that clear whether `N_` or
`TIP_` should be used in this case, but `TIP_` seems more consistent.
To avoid the cost of the translation lookup when the UI text isn't
necessary, we could allow the disabled hint argument to be optional.
Differential Revision: https://developer.blender.org/D13141
Wire-only meshes have a special case in the overlay drawing to give
the wire shader a special color (which avoids the lines being dashed,
somehow). The fast path for duplis didn't have that special case.
Differential Revision: https://developer.blender.org/D13196
Since we have the overlays popover, it makes sense to allow toggling the
context path like in the 3D viewport. This commit adds a property,
and turns it on by default in existing files.
Differential Revision: https://developer.blender.org/D13248
The problem is that drw_batch_cache_generate_requested_delayed
is called on the object, which uses the original object data type to
choose which data type to get info for. So for curves and text it uses
the incorrect type (not the evaluated mesh like we hardcoded in the
armature overlay code).
To fix this I hardcoded the "delayed" generation to only use the
evaluated mesh. Luckily it wasn't use elsewhere besides this
armature overlay system. That seems like the simplest fix for
3.0. A proper solution should rewrite this whole area anyway.
Differential Revision: https://developer.blender.org/D13439
* Spot lights are now handled as disks aligned with the direction of the
spotlight instead of view aligned disks.
* Point light is now handled separately from the spot light, to fix a case
where multiple lights are intersected in a row. Before the origin of the
ray was the previously intersected light and not the origin of the initial
ray traced from the last surface/volume interaction.
This makes both strategies in multiple importance sampling converge to the same
result. It changes the render results in some scenes, for example the junkshop
scene where there are large point lights overlapping scene geometry and each
other.
Differential Revision: https://developer.blender.org/D13233
After 1ef8ef4941 there were build warnings because of unused
arguments. Also missed to change code to iterate `strips` instead of
`seqbase` in 2 functions.
The Realize Instances and Join Geometry node can share most of their code.
Until now, both nodes had their own implementations though. This patch
removes the implementation in the Join Geometry node in favor of the more
general Realize Instances implementation.
This removes an optimization for avoiding spline copies. This can be brought
back later. The realize instances code has to be rewritten to support attribute
instances anyway.
Differential Revision: https://developer.blender.org/D13417
This node calculates the dual of the input mesh. This means that faces
get replaced with vertices and vertices with faces. In principle this
only makes sense when the mesh in manifold, but there is an option to
keep the (non-manifold) boundaries of the mesh intact.
Attributes are propagated:
- Point domain goes to face domain and vice versa
- Edge domain and Face corner domain gets mapped to itself
Because of the duality, when the mesh is manifold, the attributes get
mapped to themselves when applying the node twice.
Thanks to Leul Mulugeta (@Leul) for help with the
ascii diagrams in the code comments.
Note that this does not work well with some non-manifold geometry,
like an edge connected to more than 2 faces, or a vertex connected to
only two faces, while not being in the boundary. This is because there
is no good way to define the dual at some of those points. This type
of non-manifold vertices are just removed for this reason.
Differential Revision: https://developer.blender.org/D12949
Replace compare floats node with a generalized compare node. The node
allows for the comparison of float, int, string, color, and vector.
The datatypes support the following operators:
Float, Int: <, >, <=, >=, ==, !=
String: ==, !=
Color: ==, !=, lighter, darker
(using rgb_to_grayscale value as the brightness value)
Vector Supports 5 comparison modes for: ==, !=, <, >, <=, >=
Average: The average of the components of the vectors are compared.
Dot Product: The dot product of the vectors are compared.
Direction: The angle between the vectors is compared to an angle
Element-wise: The individual components of the vectors are compared.
Length: The lengths of the vectors are compared.
Differential Revision: https://developer.blender.org/D13228
Now that we can store any dynamic attribute on the instances component,
we don't need the special case for `id`, it can just be handled by the
generic attribute storage. Mostly this just allows removing a bunch
of redundant code.
I had to add a null check for `update_custom_data_pointers` because
the instances component doesn't have any pointers to inside of
custom data.
Differential Revision: https://developer.blender.org/D13430
This patch adds a layer_idx and pass_idx parameter to the rna_Image_gl_load function. It exposes both to the Python API as optional parameters.
This allows python scripters to specifiy which layer and pass they want to load in to an OpenGL texture. Right now image.gl_load() always takes the first layer and first pass.
This is limiting when working with multilayer openEXRs.
With this patch scripters can do something like this:
```
pass_idx = area.spaces.active.image_user.multilayer_pass
layer_idx = area.spaces.active.image_user.multilayer_layer
image.gl_load(frame=0, layer_idx=layer_idx, pass_idx=pass_idx)
```
As the parameters are optional and default to 0, it should not break existing code.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D13435
Commit f0d20198b2 used this field to flag rendered strips which were
queried by `SEQ_query_rendered_strips()`. Then operators iterate all
strips and checks state of `seq->tmp_flag`.
Use collection returned by `SEQ_query_rendered_strips` directly.
There should be no functional changes.
This commit adds functions `all_strips_from_context` and
`selected_strips_from_context` that provide collection of strips based
on context. Most operators can use this collection directly.
There is already `seq->tmp` DNA field, but is should not be used unless
absolutely necessary. Better option is to use human readable flag.
Best is to not use DNA fields for temporary storage in runtime.
When enabling or disabling a Mesh Sequence Cache modifier of an Object
with a hair particle system, the hair would switch positions. This is
caused because original coordinates in Blender are expected to be
normalized, and toggling the modifier would cause the usage of different
orco layers: one that is normalized, and the other which isn't.
This bug exposes a few related issues:
- if the Alembic file did not have orco data,
`MOD_deform_mesh_eval_get`, used by the particle system modifier, would
add an orco layer without normalization
- `MOD_deform_mesh_eval_get` would also ignore the presence of an orco
layer (e.g. one that could have been read from Alembic)
- if the Alembic file did have orco data, the data would be read
unnormalized
To fix those various issues, original coordinates are normalized when
read from Alembic and unnormalized when written to Alembic; and a new
utility function `BKE_mesh_orco_ensure` is added to add a normalized
orco layer if none exists on the mesh already, this function derives
from the code used in the particle system.
Reviewed By: brecht
Maniphest Tasks: T92561
Differential Revision: https://developer.blender.org/D13306
This is part of T92926, and is very similar to 221b7b27fc, except
slightly similar, because it only transfers from one component, and
it doesn't handle multi-threading at the moment.
Should be safe to do so now that 2.8+ has been out for 8 releases and over 2 years now.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12984
When the select action was set to "Select Tool", shift-clicking
on sequence strips wasn't selecting the strip.
Regression in 2a2d873124
Thanks to @a.monti for the fix.
- Integer Field input of the number of control points on each spline
in the spline domain.
- In the point domain, it is the number of points on the spline that
contains the given control point.
Differential Revision: https://developer.blender.org/D13279
No behavioral changes are expected here.
Part of T91414: Unify link/append between WM operators and BPY context
manager API, and cleanup usages of `BKE_library_make_local`.
This will be used by the copy/paste code.
Part of T91414: Unify link/append between WM operators and BPY context
manager API, and cleanup usages of `BKE_library_make_local`.
When appended collections are instantiated in viewlayers, do not add to
viewlayers collections children of other instantiated collections.
This default behavior is required for proper copy/paste behavior. If
previous behavior needs to be brought back for regular append operation,
this can be decided and done, but think this default behavior also makes
sense in normal append case.
part of T91414: Unify link/append between WM operators and BPY context
manager API, and cleanup usages of `BKE_library_make_local`.
Unfortunately the drop logic for file-path based drag & drop checks the
used icon for its logic. This is very bad and should be changed. But
doing this involves some changes that are better not done during bcon4,
so for now stick to it and update the icon check.
Reviewed by: Julian Eisel
Differential Revision: https://developer.blender.org/D13383?id=45314
When adding `INSERT` operations over RNACollection items, rna diffing
code did not properly report the properties as not being equals.
This in turn triggered the 'purge unused exiting override properties'
mechanism, thus deleting the exitsting (valid) insert override property
operation.
NOTE: This should also be backported to 2.93, and probably 2.83.
Reviewed By: sybren, jbakker
Maniphest Tasks: T93353
Differential Revision: https://developer.blender.org/D13426
The default snap behavior to perform on tools and cursors is to the
final geometry and not edited geometry.
In snapping to edited geometry, there are some specific behaviors that
are not convenient in some cases. For example the general occlusion
test of X-Ray geometries during dragdrop.
This fix also resolves a regression for tools like measure and placement
that were also ignoring the snap to face in x-ray mode.
Differential Revision: https://developer.blender.org/D13410
Note that this fully replaces the 'PyCapsule' storage of linked/appended items
in the python API code by the generic storage of items in the
`BlendfileLinkAppendContext` data.
Maniphest Tasks: T91414
Differential Revision: https://developer.blender.org/D13331
- Rename the Curve Parameter node to Spline Parameter.
- Add "Index on Spline" to the node. This output is the index of
the current point on it's parent spline rather than the entrire curve.
Differential Revision: https://developer.blender.org/D13275
The `ASSET_OT_bundle_install` operator only works when the blend file is
self-contained. It reports any external dependencies. Before this patch:
- every dependency was mentioned, even when it repeated the same
filename over and over again, and
- multiple dependencies were all mentioned in the error popup,
potentially filling the screen.
This is now resolved by:
- only reporting each external file once, and
- referring to the console when there are multiple external dependencies.
Reviewed by: severin, dfelinto
Differential Revision: https://developer.blender.org/D13413
`file.select()` wasn't handling redirects as it should when it also
opens directories. This was only uncovered by a change in the keymap.
Reviewed By: Bastien Montagne, Harley Acheson
Differential Revision: https://developer.blender.org/D13388
Combined view of timeline and preview causes seemingly unpredictable
behavior after some operators have been allowed to run in preview
region.
Disable new features in this combined view, so behavior should be
consistent with previous versions.
ref: https://developer.blender.org/T92584
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D13419
Add flag to `BKE_bpath_traverse_id()` and friends to skip weak
references (see below). This makes a distinction between "this blend
file depends on that file" and "this blend file references that file,
but doesn't directly use its data". This distinction is for the Asset
Bundle install operator, which refuses to copy the blend file when it's
not self-contained.
Weak references are those that are not directly used by the blend file,
but are still present to allow path rewriting. For example, when an
Asset is loaded its originating blend file is saved in
`ID::library_weak_reference`; this reference is purely for deduplication
purposes, and not for actually loading any data.
Reviewed by: mont29, brecht
Differential Revision: https://developer.blender.org/D13412
If strip is removed while proxy is built, this causes crash when
building is finished. This happens because proxy anims are freed in
`SEQ_proxy_rebuild_finish()`.
Iterate over available strips and check if original strip still exists
by comparing `SessionUUID`.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D13408
It's important the coordinates the knife is operating on are never
manipulated since it will cause problems which are difficult to
troubleshoot.
Instead, use a cast in the MEM_freeN(..) call.
This reverts commit 8600d4491f.
The Domain Size node has a single geometry input and a selection for
the component type. Based on the component chosen, outputs containing
single values for the related domains are shown.
Mesh:
- Point Count
- Edge Count
- Face Count
- Face Corner Count
Curve:
- Point Count
- Spline Count
Point Cloud:
- Point Count
Instances:
- Instance Count
Differential Revision: https://developer.blender.org/D13365
The crash was caused by allocating an uninitialized amount of memory.
This fix initializes a bunch of variables that could cause the error.
It should be possible to also fix this in the function that actually uses
the uninitialized memory, but that could cause unknown consequences
that are a bit too risky for 3.0. Just initializing some variables should
be safe though. For more details see D13369.
Differential Revision: https://developer.blender.org/D13369
The are few things in the dependency graph which lead to the issue:
- IDs are only built once.
- Object-data level (Armature, i,e,) builder dependent on the object
visibility.
This caused issues when an armature is first built as not directly
visible (via driver, i.e.) and then was built as a directly visible.
This did not update visibility flag on the node for the custom shape
object.
The idea behind the fix is to go away form passing object visibility
flag to the geometry-level builders and instead rely on the common
visibility flush post-processing to make sure certain objects are
fully visible when needed.
This is the safest minimal part of the change for 3.0 release which
acts as an additional way to ensure visibility. This means that it
might not be a complete fix (if some configuration was overseen) but
it should not make currently working cases to not work.
The fix should also make modifiers used on rigify widgets to work.
The more complete fix will have `is_object_visible` argument removed
from the geometry-level builder functions.
Differential Revision: https://developer.blender.org/D13404
Regression since 3.93 caused by 752c6d668b.
Follow the code from 2.93 which was always leaving curve modifiers
evaluation with a valid and clean state of the bounding box.
This is also what was proposed and agreed on in the following
design task: T92206: Bounding Box: compute during depsgraph evaluation
Tested with files from T90808 and T93384.
For the 3.0 going with the safest and minimal change. The rest of
the bounding box un-entanglement is to happen outside of the stable
branch.
Thanks The patch is based on the code from Philipp Oeser and
investigation by Germano Cavalcante and Dr. Sybren A. Stüvel,
thanks!
Differential Revision: https://developer.blender.org/D13409
This patch adds MetalRT support to Cycles kernel code. It is mostly additive in nature or confined to Metal-specific code, however there are a few areas where this interacts with other code:
- MetalRT closely follows the Optix implementation, and in some cases (notably handling of transforms) it makes sense to extend Optix special-casing to MetalRT. For these generalisations we now have `__KERNEL_GPU_RAYTRACING__` instead of `__KERNEL_OPTIX__`.
- MetalRT doesn't support primitive offsetting (as with `primitiveIndexOffset` in Optix), so we define and populate a new kernel texture, `__object_prim_offset`, containing per-object primitive / curve-segment offsets. This is referenced and applied in MetalRT intersection handlers.
- Two new BVH layout enum values have been added: `BVH_LAYOUT_METAL` and `BVH_LAYOUT_MULTI_METAL_EMBREE` for XPU mode). Some host-side enum case handling has been updated where it is trivial to do so.
Ref T92212
Reviewed By: brecht
Maniphest Tasks: T92212
Differential Revision: https://developer.blender.org/D13353
This patch adds new arg-type parameters to `DeviceQueue::enqueue` and its overrides. This is in preparation for the Metal backend which needs this information for correct argument encoding.
Ref T92212
Reviewed By: brecht
Maniphest Tasks: T92212
Differential Revision: https://developer.blender.org/D13357
Make `ED_preview_id_is_supported(ID *)` NULL-safe. It's semantically
valid, as it's not possible to render a preview of a NULL ID.
The crash was introduced in 481f032f5c
Reviewed By: sybren, jbakker
Maniphest Tasks: T93431
Differential Revision: https://developer.blender.org/D13398
The main goal of this refactor is to make BPath module use `IDTypeInfo`,
and move each ID-specific part of the `foreach_path` looper into their
own IDTypeInfo struct, using a new `foreach_path` callback.
Additionally, following improvements/cleanups are included:
* Attempt to get better, more consistent namings.
** In particular, move from `path_visitor` to more standard `foreach_path`.
* Update and extend documentation.
** API doc was moved to header, according to recent discussions on this
topic.
* Remove `BKE_bpath_relocate_visitor` from API, this is specific
callback that belongs in `lib_id.c` user code.
NOTE: This commit is expected to be 100% non-behavioral-change. This
implies that several potential further changes were only noted as
comments (like using a more generic solution for
`lib_id_library_local_paths`, addressing inconsistencies like path of
packed libraries always being skipped, regardless of the
`BKE_BPATH_FOREACH_PATH_SKIP_PACKED` `eBPathForeachFlag` flag value,
etc.).
NOTE: basic unittests were added to master already in
rBdcc500e5a265093bc9cc.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D13381
Currently, nodes with custom sockets do not get their internal links
populated. So operators like Delete And Reconnect don't work with such
nodes. This patch put custom sockets into consideration when computing
priorities for internal links such that sockets of the same idname get
connected. Additionally, the patch cleanup the function in the process
to avoid redundant code repetition.
Reviewed By: Jacques Lucke
Differential Revision: https://developer.blender.org/D13386
Currently, custom sockets are no longer supported for automatic linking
when dropping a node on a link. This is because SOCK_CUSTOM is given a
negative priority and is ignored. To fix this, SOCK_CUSTOM is now given
the lowest priority and the rest of the sockets got their priority
incremented.
Reviewed By: Jacques Lucke
Differential Revision: https://developer.blender.org/D13403
Currently we have a separate `InstancesDataSource`, which does almost
exactly the same thing as `GeometryDataSource`, except that it hardcodes
a few more columns: "Name", "Rotation", and "Scale". We can easily
replace that with a couple of if statements in the geometry data source.
This also makes named attributes on instances display
in the spreadsheet.
Differential Revision: https://developer.blender.org/D13391
Linux distributions are using newer TBB versions than official releases, and
TBB 2021 is an API breaking release.
In general we should avoid using TBB directly and go through the abstractions
in BLI_task.hh, though there is no abstraction for this.
For 3.0 the safe option is to just not cancel the task but instead early out
in the lambda function. Given the grain size of 2048 there should be no
significant performance difference.
Differential Revision: https://developer.blender.org/D13382
This patch gets rid of the O(N^3) complexity
of calculate_vertices. Execution time of the node is
reduced from 250ms to 140ms with 500^3 vertices.
In the future edge calculations could be done manually
and reduce the execution time even further.
Differential Revision: https://developer.blender.org/D13207
Parallelizes the loop that converts splines.
It gives around a 2x speedup on curves with over 1k splines.
Differential Revision: https://developer.blender.org/D13389
The isect_line_sphere algorithm became very imprecise when the line and
the sphere were reasonably far away from the world origin.
This would lead to no intersections being reported even if there was a
guaranteed intersection (line crossing from inside the sphere to the
outside).
To fix this we now use the secant root finding method to get an
intersection point. This is much more stable and robust it seems.
This implements four optimizations in the Set Position node:
* Check whether the position input is the current position and ignore
it if it is. This results in a speedup when only the Offset input is used.
* Use multi-threading when copying to computed values to the
position attribute. All geometry types benefit from this.
* Use devirtualization for the offset and position input. This optimizes
the common case that they are either single values or computed
in the fly in a span.
* Write to `Mesh->mvert` directly instead of creating a temporary span.
This makes setting mesh vertex positions even more efficient.
In my simple benchmark I'm using a White Noise node to offset the
position of 1,000,000 vertices. The speed is `20 ms -> 4.5 ms` in the
multi-threaded case and `32 ms -> 22 ms` in the single-threaded case.
This patch fixes an address space mismatch in the film convert kernels on Metal. The `film_get_pass_pixel_...` functions take a `ccl_private` result pointer, but the film convert kernels pass a `ccl_global` memory pointer. Specialising the pass-fetch functions with templates results in compilation errors on Visual Studio, so instead this patch just adds an intermediate local on Metal.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D13350
For some underlying data (e.g. spans) we had two virtual array
implementations. One for the mutable and one for the immutable
case. Now that most code does not deal with the virtual array
implementations directly anymore (since rBrBd4c868da9f97a),
we can get away with sharing one implementation for both cases.
This means that we have to do a `const_cast` in a few places, but
this is an implementation detail that does not leak into "user code"
(only when explicitly casting a `VArrayImpl` to a `VMutableArrayImpl`,
which should happen nowhere).
This leads to division by zero in Freestyle's NoiseShader which also
crashes blender.
Not sure if we really need a do_version patch for old files, as an
alternative we could also force a positive number in the NoiseShader.
This patch does not do either, just force a positive range in RNA from
now on.
Maniphest Tasks: T89081
Differential Revision: https://developer.blender.org/D13332
This broke with {rB20fac2eca723} (which landed in 2.63), so long
standing bug.
Convention for paint modes is:
- when no paint mask is active, `Frame Selected` will focus the last
stroke
- when paint mask is active, `Frame Selected` will focus the selected
mask faces
To check the right vert coords we have to offset with `mp->loopstart`.
Maniphest Tasks: T93130
Differential Revision: https://developer.blender.org/D13247
Caused by {rBaf162658e127}, so long standing bug.
When changing clone slots (report involved a quite complicated sequence
of selecting textures and undo -- but I think this could happen in more
situations) code checks for UV of new clone slot.
However, since above commit the slot and the clone slot were mixed up,
so in this case the responsible NULL check (for when no UV is assigned)
wasnt working.
Now correct this (NULL check the clone slot uv -- instead of the paint
slot UV).
note: not sure why low level CustomData functions actually dont do the
name NULL checks themselves (seems like callers are always responsible).
Maniphest Tasks: T93117
Differential Revision: https://developer.blender.org/D13378
Reproduce the logic we already do in C (BKE_blender_version_is_alpha)
and the CMake file.
Otherwise it can get out of sync if we add/rename the non-alpha release cycles.
No functional change.
Differential Revision: https://developer.blender.org/D13379
This was crashing using the clone tool without a clone image assigned.
Caused by {rB9111ea78acf4}.
Since above commit, `BKE_image_acquire_ibuf` was using `ima->runtime`
without checking for NULL first.
Since callers are not required to check for this, just return early
here.
note: there is still a memory leak using the clone tool without a clone
image assigned (but this was also the case before said commit and needs
to be investigated separately).
Maniphest Tasks: T93380
Differential Revision: https://developer.blender.org/D13377
Instead of drawing the mask layers in the sequence of their occurence, draw the active mask *always* on top.
Implementation:
- move drawing loop for splines to separate static function
- draw active mask last
Example: lowest layer is active, yet still drawn on top.
{F12140355}
This is part of an effort to make mask editing more intuitive & easy to use: https://developer.blender.org/T93097
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D13372
Previously, there was a fixed grain size for all multi-functions. That was
not sufficient because some functions could benefit a lot from smaller
grain sizes.
This refactors adds a new `MultiFunction::call_auto` method which has the
same effect as just calling `MultiFunction::call` but additionally figures
out how to execute the specific multi-function efficiently. It determines
a good grain size and decides whether the mask indices should be shifted
or not.
Most multi-function evaluations benefit from this, but medium sized work
loads (1000 - 50000 elements) benefit from it the most. Especially when
expensive multi-functions (e.g. noise) is involved. This is because for
smaller work loads, threading is rarely used and for larger work loads
threading worked fine before already.
With this patch, multi-functions can specify execution hints, that allow
the caller to execute it most efficiently. These execution hints still
have to be added to more functions.
Some performance measurements of a field evaluation involving noise and
math nodes, ordered by the number of elements being evaluated:
```
1,000,000: 133 ms -> 120 ms
100,000: 30 ms -> 18 ms
10,000: 20 ms -> 2.7 ms
1,000: 4 ms -> 0.5 ms
100: 0.5 ms -> 0.4 ms
```
Affect and effect are too confusing for non-native english speakers
(like me). Also BAKING_MASK_MARGIN doesn't exist anymore in the code.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D13361
Under some circumstances that can lead to more than a 2x
performance increase, because math nodes can better optimize
for the case when the slice is a single value or span.
Caused by 6b0869039a
Above commit introduced selection after renaming. This includes calling
`file_select_deselect_all` [which resorts and refilters].
So now, to have the correct file for scrolling, get it again after
sorting by calling `file_params_find_renamed` again.
Differential Revision: https://developer.blender.org/D13368
A minor cosmetic fix. When the view was scrolled all the way to the
bottom, the lowest panel would end right on the view edge. The
scrollable view should get the same margin at the bottom as used at the
top.
This corrects some alignments issues through new margins introduced in
93544b641b. Basic idea of this fix is to only add the new margins when
drawing a panel with background. These margins were added specifically
for the background boxes, so that makes sense.
Alternative fix to D13199.
This also fixes some margings added unintentionally in mentioned commit.
There is a little jump of the toolbar and the tabs in the Properties
when comparing the UI without this fix to 2.93:
{F12158085} {F12158039}
The jump is gone with this fix applied (compare to the 2.93 screenshot):
{F12158064}
While not a serious issue, this confirms that this fix actually tackles
the root of the issue.
Don't use the side padding for menu item contents when displaying
previews or icons in a row or grid layout. This can cause problems for
the preview drawing and doesn't make sense to draw there anyway.
This not only fixes the mentioned issue, but also too small heighlight
for the collection color tag in the Outliner context menu.
Alternative to and similar to D13125.
Assigning a catalog to an asset via drag-and-drop in the asset browser
now creates an undo step. Not only does this allow undoing the action,
it also tags the blend file as modified.
Reviewed by: Severin
Differential Revision: https://developer.blender.org/D13370
This fixes a crash when muting the "Group Output" node.
It should not be possible to mute it so this patch
sets the `no_muting`-variable on it.
Differential Revision: https://developer.blender.org/D13364
Liboverride properties and operations list need to be fully up-to-date
before libraries are reloaded, otherwise re-applying those liboverrides
after linked data is reloaded may miss some changes.
This reverts the changes to fix T87448, where entering the same value in number
buttons causes an unnecessary update. This is not stable enough for 3.0 and so
is being reverted, better to have an unnecessary update than no update in other
cases.
This effectively reverts the changes from rBeb06ccc32462 and follow up fixes
rBe1a9ba94c599, rBbbb52a462ef9, rBec30cf0b742f, and rB071799d4fc44. The code is
disabled with a comment on how it could be implemented better.
Bug introduced in {rBaa0ac0035a0d}.
The invalid depth fallback was changed to `FLT_MAX` in order to match the
annotation and gpencil operations.
This broke the `Interactive Light Track` operator which invalidates the
operation if the depth value is `1.0f`.
The chosen solution was to change the value tested in the annotation and
gpencil operations.
Caused by {rBcf2baa585cc8}.
For Curve Guide force fields to work, the `Path Animation` option has to
be enabled. With it disabled, we are lacking the necessary
`anim_path_accum_length` data initialized [done by
`BKE_anim_path_calc_data`] which `BKE_where_on_path` relies on since
above commit.
Now just check for this before using it - and return early otherwise.
Prior to said commit, `BKE_where_on_path` would equally return early
with a similar message, so that is expected behavior here.
Maniphest Tasks: T93338
Differential Revision: https://developer.blender.org/D13371
The issue was that the attribute propagation in the Fillet Curve node seems
pretty broken. I couldn't really make sense of the old code. It changed the
size of the point attribute domains on splines to 1 for some reason which
led to a crash in the next node.
Differential Revision: https://developer.blender.org/D13362
The mirror modifiers merge option caused unnecessary re-ordering
to the vertex array with original vertices merging into their copies.
While this wasn't an error, it meant creating a 1:1 mapping from input
vertices to their final output wasn't reliable (when looping over
vertices first to last) as is done in
BKE_editmesh_vert_coords_when_deformed.
As merging in either direction is supported, keep the source meshes
vertices in-order since it allows the vertex coordinates to be extracted.
NOTE: Since this change introduce issues for some cases (e.g. bound
modifiers like SurfaceDeform), this change is only applied to newly
created modifiers, existing ones will still use the old incorrect merge
behavior.
Reviewed By: @brecht
Maniphest Tasks: T93321, T91444
Differential Revision: https://developer.blender.org/D13355
Revert "Fix T91444: Edge Loop Preview fails with two Mirror Modifiers"
This reverts commit 1a7757b0bc.
Caused issue reported in T93321, boiling down to the fact that other
operations or modifiers (like the SurfaceDeform one) rely on the order
of the vertices in the mesh to remain consistent.
Changing this in a modifier would mean those operations need to be
reset/re-created (e.g. rebound for the SurfaceDeform case), which is not
doable in `do_version` code.
Was happening during rendering, causing visual artifacts when doing
CPU+GPU rendering, and giving different in-progress results on different
devices.
The root of the issue comes to the fact that math used in the approximate
shadow catcher calculation might have resulted in negative alpha channel,
and negative values for display are handled differently on CPU and GPU.
Such difference in handling is caused by an approximate conversion used on
the CPU for the performance reasons.
This change makes it so no negative alpha is generated by the approximate
shadow catcher. Not sure if we need some explicit clamping somewhere to
deal with possible negative values coming from somewhere else.
The shadow catcher cornell box tests are to be updated for the new code,
but the new result seems to be more accurate.
Differential Revision: https://developer.blender.org/D13354
Noticed when was looking into T93155. Steps to reproduce:
- Open the .blend file from the report
- Hit F12 to start rendering
- After some tiles were rendered hit Esc
The issue is caused by "sticky" cancel reported via Progress. This means
that once user hit Esc all further requests for cancel state will return
truth, which was preventing OIDN denoiser from completing the denoising
task.
Now only allow stopping the denoiser when interactive rendering requests
a very fast stopping.
Aiming the fix for 3.0 branch.
Differential Revision: https://developer.blender.org/D13352
With the current code in master, scrambling distance is enabled on non-hardware accelerated ray tracing devices see a measurable performance decrease when compared scrambling distance on vs off. From testing, this performance decrease comes from the large tile sizes scheduled in `tile.cpp`.
This patch attempts to address the performance decrease by using different algorithms to calculate the tile size for devices with hardware accelerated ray traversal and devices without. Large tile sizes for hardware accelerated devices and small tile sizes for others.
Most of this code is based on proposals from @brecht and @leesonw
Reviewed By: brecht, leesonw
Differential Revision: https://developer.blender.org/D13042
A parallel loop to create the interesection meshes for each triangle
meant that with parallelism, the output order of the created meshes
could vary with each execution. Keep the parallelism for doing the CDTs
for interesection, but move the extraction of the new faces into a
serial loop afterwards, for repeatability.
This commit improves the scaling of some ui widgets when
zooming by making the radius of the rounded corners
dependent on the element's zoom level.
Needed to fix T92278 without padding issues, see D13125.
Reviewed By: Hans Goudey, Julian Eisel
Differential Revision: https://developer.blender.org/D12842
There are two functions that recalculate the boundbox of an object:
- One that considers the evaluated geometry
- Another that only considers the object's `data`.
Most of the time, the bound box is calculated on the final object
(with modifiers), so it doesn't seem right to just rely on `ob->data`
to recalculate the `ob->runtime.bb`.
Be sure to calculate the BoundBox based on the final geometry and
only use `ob->data` as a fallback
Differential Revision: https://developer.blender.org/D12282
Changes icon used to indicate blend file when overlaid over larger
document icon when in thumbnail view. Only seen when file does not
have a preview.
Followup to {rB611e4ffaab43}
For more details and examples see D13342
Differential Revision: https://developer.blender.org/D13342
Reviewed by Julian Eisel
Changes icon used to indicate blend file when overlaid over larger
document icon when in thumbnail view. Only seen when file does not
have a preview.
Followup to {rB611e4ffaab43}
For more details and examples see D13342
Differential Revision: https://developer.blender.org/D13342
Reviewed by Julian Eisel
Without this it's easy to loose track of which catalog you are dragging.
Things feel generally quite jumpy/disconnected, activating the catalog
makes things feel far less like that.
I consider this an important usability fix, therefore I'm adding it to
the release branch.
When dropping catalogs it is ensured that the name of the moved catalog
is unique within the new parent catalog. When dropping a catalog into
the parent, the catalog would not actually move to a different location,
but it would still be renamed. The unique name logic simply isn't smart
enough to ignore the catalog that is about to be moved.
Address this by disallowing dragging a catalog into its own parent. It's
already there.
This was an oversight when I added catalog drag & drop support. I forgot
to add this for dragging catalogs into the top level by dragging into to
the "All" item as well. This made the drag & drop support rather broken
because it wouldn't work for a basic case.
When a node is executed, it usually schedules other nodes.
Right now, those newly scheduled nodes are added to a
task pool so that another thread can start working on them
immediatly.
However, that leads to the situation where sometimes each
node in a simple chain is executed by another thread. That
leads to additional threading overhead and reduced cache
efficiency (for caches that are not shared between cores).
Now, when a node is executed and schedules other nodes,
the first of those newly scheduled nodes will always be
executed on the same thread once the current node is done.
If it schedules more than one other node, those will be
added to the task pool as before.
The speedup achieved by this is hard to measure. I found it
to be a couple percent faster in some extreme cases, not
much to get excited about. It's nice though that the number
of tasks added to the task pool is commonly reduced by a
factor of 4 or 5.
This part of the drawing code assumes that the bone custom object
has only one evaluated geometry component, and it also uses the
object type to check which data to draw, with the functions like
`DRW_cache_object_surface_get` that just take an object input.
Those functions usually work on evaluated objects, which use the
instancing system to access a temporary object with `object.data`
replaced for data types that don't match the original object.
That assumption used to work, but now curve, point cloud, or volume
objects can have an evaluated mesh which is not accessed with the
same object for render engine drawing.
The "correct" solution for the way this code is structured would be to
loop through all of the geometry components and try to get GPU batches
from every one of them. However, that significantly increases complexity
in an area that should probably be refactored anyway. This patch treats
the mesh as a special case, and only draws the evaluated mesh.
The **best** solution in my opinion might be refactoring this area to
use the instancing system with some sort of viewport-only flag so
the custom shape instances aren't added in the render.
The solution is "partial" because the "Wireframe" option only works
for meshes from mesh objects, even after this fix, and because other
data besides meshes is not displayed at all.
Differential Revision: https://developer.blender.org/D13038
Some enum names were changed/removed in OptiX 7.4, so some changes are necessary to
make things compile still.
In addition, OptiX 7.4 also adds built-in support for catmull-rom curves, so it is no longer
necessary to convert the catmull-rom data to cubic bsplines first, and has endcaps disabled
by default now, so can remove the special handling via any-hit programs that filtered them
out before.
Differential Revision: https://developer.blender.org/D13351
The patch slightly modifies two recently added icons "FILE_BLEND" and
"CURRENT_FILE" to better align them to the pixel grid, and change the
design of "FILE_BACKUP" to avoid alignment and readability issues, as
well as avoiding the outline version of the Blender logo which violates
the official logo guidelines.
Differential revision: https://developer.blender.org/D13346
When a manual frame range is set, allow marking an action as having
Cyclic Animation. This does not affect how the action is evaluated,
but the Cycle-Aware Keying option will automatically make any newly
added F-Curves cyclic. This allows using the option from the start
to build the cycle, rather than only for tweaking an existing loop.
The curves are made cyclic when they have only one key, either
after inserting the first key, or before adding the second one.
The latter case avoids the need to manually make the first added
curve cyclic after marking a newly added action cyclic.
Differential Revision: https://developer.blender.org/D11803
Some operations, e.g. adding a new action strip to NLA, require
knowing the active frame range of an action. However, currently it
can only be deduced by scanning the keyframes of the curves within
it. This is not ideal if e.g. curves are staggered for overlap.
As suggested by Nathan Vegdahl in comments to T54724, this patch adds
Action properties that allow manually specifying its active frame range.
The settings are exposed via a panel in the Dopesheet and Action Editor.
When enabled, the range is highlighted in the background using a striped
fill to distinguish it from the solid filled regular playback range.
When set, the frame range is used when adding or updating NLA tracks,
and by add-ons using `Action.frame_range`, e.g. FBX exporter.
Differential Revision: https://developer.blender.org/D11803
Add a new 'selected_visible_actions' property to allow querying
actions that are selected in animation related editors for use in
UI and operators. The 'selected_editable_actions' variant excludes
linked actions (the only reason an action can be read-only).
In the Action and Shape Key editors there is only one action
that is specified by the field at the top of the editor.
In Dope Sheet it scans the channel rows and returns all actions
related to the selected items. This includes summary items for
actions and groups.
In Graph Editor, it lists actions associated with selected curves.
The new property is also used for Copy To Selected and Alt-Click.
Ref D11803
This is only meant to be used for development purposes for now,
not to show warnings to the user.
Differential Revision: https://developer.blender.org/D13348
Previously, there were a couple of cases where nodes were scheduled when
that was not really necessary. This change doesn't seem to have a big impact
on performance, but simplifies the code a bit.
There are few layers of things which lead to the situation
of more noisy material preview: the do-version of the
preview.blend did not happen (at least from the Python
side as we did not investigate the C side deep). This made
Cycles to use default integrator settings for the preview
file ever since the Cycles X was merged. Those settings are
adaptive sampling with max 4K samples, noise threshold 0.01.
Opening the file in Blender 3.0 for edit did run the versioning
code which effectively lowered the number of samples used for
rendering.
This change makes it so the preview file is configured with
the exact effective settings as seen by Cycles prior to the
file was re-saved (adaptive sampling with the parameters noted
above).
This fix does not chaneg the fact that the versioning code is
not used for preview.blend, it only solves the regression in
the quality of previews.
The fix is done and reviewed with collaboration with Dalai and Sergey.
This dependency was a bit ugly and the functions from the mask modifier
did a few things that we don't need in the Delete Geometry node:
* The mask modifier uses `CustomData_copy_data` which the node doesn't need.
* The mask modifier checks for `-2` in some values, but this special value is
not used by the node.
Differential Revision: https://developer.blender.org/D13335
Unity builds are only used in the `bf_nodes_geometry` module for now.
This module has been prepared to support unity builds already.
Usually, there is a 2-4x speedup when building `bf_nodes_geometry`
compared to without unity builds (e.g. 145s to 55s).
For more information about how unity builds work and how they help
with compile times, see D13341.
Differential Revision: https://developer.blender.org/D13341
Basically, this fixes disappearing previews when editing asset metadata
or performing undo/redo actions.
The preview generation in a background job will eventually modify ID
data, but the undo push was done prior to that. So obviously, an undo
then would mean the preview is lost.
This patch makes it so undo/redo will regenerate the preview, if the preview
rendering was invoked but not finished in the undone/redone state.
The preview flag PRV_UNFINISHED wasn't entirely what we needed. So I had to
change it to a slightly different flag, with different semantics.
Basically, this fixes disappearing previews when editing asset metadata
or performing undo/redo actions.
The preview generation in a background job will eventually modify ID
data, but the undo push was done prior to that. So obviously, an undo
then would mean the preview is lost.
This patch makes it so undo/redo will regenerate the preview, if the preview
rendering was invoked but not finished in the undone/redone state.
The preview flag PRV_UNFINISHED wasn't entirely what we needed. So I had to
change it to a slightly different flag, with different semantics.
Two issues addressed here:
I) `asset_type_info` is sub-data, not a callback. Therefore, move it
before the callbacks in the `IDTypeInfo` struct.
II) More important, initialize this new attribute in *ALL* `IDTypeInfo`
instances. No member of this struct should ever be left implicitely
uninitilazed, ever.
Aftermath of rBa84f1c02d251.
Asset library indexing would store indexes of asset files to speed up
asset library browsing.
* Indexes are read when they are up to date
** Index should exist
** Index last modify data should be later than the file it indexes
** Index version should match
* The index of a file containing no assets can be load without opening
the index file. The size of the file should be below a 32 bytes.
* Indexes are stored on a persistent cache folder.
* Unused index files are automatically removed.
The structure of the index files contains all data needed for browsing assets:
```
{
"version": <file version number>,
"entries": [{
"name": "<asset name>",
"catalog_id": "<catalog_id>",
"catalog_name": "<catalog_name>",
"description": "<description>",
"author": "<author>",
"tags": ["<tag>"]
}]
}
```
Reviewed By: sybren, Severin
Maniphest Tasks: T91406
Differential Revision: https://developer.blender.org/D12693
This patch adds test cases to detect edge cases when finding
keylist columns.
The patch originated during development of D12052 to make sure
the new implementation matches the old implementation. It would
be good to add these test cases to master so this part is covered
in a next change might influence the expected edges.
The patch covers `ED_keylist_find_next`, `ED_keylist_find_prev`
and `ED_keylist_find_exact` methods.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D12302
extracts the search for keyframe segments (consecutive selection of keys)
It will be reused by future graph editor operators
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D9360
Ref: D9360
In rBdcdbaf89bd11, I introduced a new operator
(`file.asset_library_refresh()`) to handle Asset Browser refreshing more
separate from File Browser refreshing. However, there already was
`asset.asset_list_refresh()`, which at this point only works for asset
view templates, but was intended to cover the Asset Browser case in
future too. This would happen once the Asset Browser uses the asset list
design of the asset view template.
So rather than having two operators for refreshing asset library data,
have one that just handles both cases, until they converge into one.
This avoids changes to the Python API in future (deprecating/changing
operators).
Differential Revision: https://developer.blender.org/D13239
windows.h `#defines rct1` as a number which is
problematic if we include `BLI_rect.h` after
`windows.h` .
by renaming `rct1/2` to `rct_a/b` we side step
the collision and straighten up the naming with
the functions directly above it.
In rBdcdbaf89bd11, I introduced a new operator
(`file.asset_library_refresh()`) to handle Asset Browser refreshing more
separate from File Browser refreshing. However, there already was
`asset.asset_list_refresh()`, which at this point only works for asset
view templates, but was intended to cover the Asset Browser case in
future too. This would happen once the Asset Browser uses the asset list
design of the asset view template.
So rather than having two operators for refreshing asset library data,
have one that just handles both cases, until they converge into one.
This avoids changes to the Python API in future (deprecating/changing
operators).
Differential Revision: https://developer.blender.org/D13239
Alternative to D13291 (description partially copied from there).
New drag & drop reordering code would call constraints reordering
operator with the generic context, and not the one from the panel's
layout. missing the "constraint" member which is mandatory for poll
function to properly deal with override vs. local constraints.
For this to work in a decent way, there needs to be some panel-wide
context that we can restore when executing callbacks outside of the
normal draw context. So similar to uiLayoutSetContextPointer() to set
context on a layout level, this introduces
UI_panel_context_pointer_set() for panel level context (this calls the
former for the current panel root layout as well).
Differential Revision: https://developer.blender.org/D13308
The bounding box transform code assumed that the pivot would always be
the sequence object transform center.
Rework the code so that this assumption is true even if the general
transform pivot is set to be the 2D cursor.
Previously, attribute propagation did not work correctly in when only
deleting edges and faces (but not points). Face and face corner attributes
were propagated wrongly or not at all respectively.
In order to keep the patch relatively small for the release branch,
it does not include some small optimizations. These can be done in 3.1:
* Use a `Span<int>` instead of `IndexMask` to avoid creating an
unnecessary `Vector<int64_t>`.
* Only prepare index mappings when there are actually attributes to
propagate.
Differential Revision: https://developer.blender.org/D13338
Adds a new overlay called "Timings" to the Geometry Node editor.
This shows the node execution time in milliseconds above the node.
For group nodes and frames, the total time for all nodes inside
(recursively) is shown. Group output node shows the node tree total.
The code is prepared for easily adding new rows of information
to the box above the node in the future.
Differential Revision: https://developer.blender.org/D13256
With this commit, we no longer use the prefixes for every node type
function like `geo_node_translate_instances_`. They just added more
places to change when adding a new node, for no real benefit.
Differential Revision: https://developer.blender.org/D13337
This disables motion blur for geometry instances in eevee, which did
not work correctly anyway. See code comment for more details.
Differential Revision: https://developer.blender.org/D13334
This happens if the Wavelength is set to 0.0f.
Not sure if we really need a do_version patch for old files, as an
alternative we could also force a slight offset in the
SinusDisplacementShader. This patch does not do either, just force a
positive range from now on.
Maniphest Tasks: T93322
Differential Revision: https://developer.blender.org/D13329
21.Q4 is required, older version should not show devices in the preferences.
This adds a check for the file version of amdhip64.dll file during hipew
initialization.
Differential Revision: https://developer.blender.org/D13324
This was just a typo in {rBb408d8af31c9}
Must be 'MINIMUM' (instead of 'MININUM').
Maniphest Tasks: T93320
Differential Revision: https://developer.blender.org/D13328
Intention of the icon is to mark add-ons that are official/bundled.
Doesn't make much sense to use the .blend file icon for that. It's
arguable if the Blender logo should be used for this, but the file icon
is definitely the wrong choice.
Intention of the icon is to mark add-ons that are official/bundled.
Doesn't make much sense to use the .blend file icon for that. It's
arguable if the Blender logo should be used for this, but the file icon
is definitely the wrong choice.
This puts all static functions in geometry node files into a new
namespace. This allows using unity build which can improve
compile times significantly (P2578).
* The name space name is derived from the file name. That makes
it possible to write some tooling that checks the names later on.
The file name extension (`cc`) is added to the namespace name as
well. This also possibly simplifies tooling but also makes it more
obvious that this namespace is specific to a file.
* In the register function of every node, I added a namespace alias
`namespace file_ns = blender::nodes::node_geo_*_cc;`. This avoids
some duplication of the file name and may also simplify tooling,
because this line is easy to detect. The name `file_ns` stands for "file
namespace" and also indicates that this namespace corresponds to
the current file. In the beginning I used `node_ns` but `file_ns` is more
generic which may make it more suitable when we want to use unity
builds outside of the nodes modules in the future.
* Some node files contain code that is actually shared between
different nodes. For now I left that code in the `blender::nodes`
namespace and moved it to the top of the file (couldn't move it to
the bottom in all cases, so I just moved it to the top everywhere).
As a separate cleanup step, this shared code should actually be
moved to a separate file.
Differential Revision: https://developer.blender.org/D13330
Currently the geometry nodes evaluator always stores a field for every
type that supports it, even if it is just a single value. This results in a lot
of overhead when there are many sockets that just contain a single
value, which is often the case.
This introduces a new `ValueOrField<T>` type that is used by the geometry
nodes evaluator. Now a field will only be created when it is actually
necessary. See D13307 for more details. In extrem cases this can speed
up the evaluation 2-3x (those cases are probably never hit in practice
though, but it's good to get rid of unnecessary overhead nevertheless).
Differential Revision: https://developer.blender.org/D13307
This changes what domain is used by the raycast mode. This should fix the
behavior for face corner attributes (but may make it a bit slower for other
attributes). I think for 3.0 this is an acceptable trade off. For 3.1 we can do
what the comment suggests already.
Differential Revision: https://developer.blender.org/D13333
The problem was that we forgot to actually remove the vertex group when
it should be deleted. We only removed all the data that was attached to it.
Differential Revision: https://developer.blender.org/D13326
rB33c5e7bcd5e5b79 doversion code was incorrectly dealing with 'insert in
first position' case from older blendfiles.
Specifically, a NULL anchor is valid (it means that the new item is the
first of the stored override data, and should be inserted at start of
the list).
Reported as part of T93321.
The Blender icon must not be used to refer to anything that is not
Blender itself. Using the Blender icon on its own to refer to .blend
files or the currently open file is a no-go, which was brought up by
Ton.
This does the following changes to the icon file:
* Add new "Current File" icon
* Change the .blend file icon to contain a file icon with the Blender
logo, but not merely the Blender logo.
* Change the backup .blend file icon accordingly.
The new "Current File" icon is used in the Asset Browser, but
could/should be used in the Outliner as well. That needs more design
discussion though.
Add an operator "Copy to Asset Library" for installing asset bundles
into already-existing asset libraries.
The operator is shown when:
- the "Current File" library is selected,
- the blend file name matches `*_bundle.blend`, and
- the file is not already located in an asset library.
The user can select a target asset library, then gets a "Save As"
dialogue box to select where in that library the file should be saved.
This allows for renaming, saving in a subdirectory, etc.
The Asset Catalogs from the asset bundle are merged into the target
asset library.
The operator will refuse to run when external files are referenced. This
is not done in its poll function, as it's quite an extensive operator
(it loops over all ID datablocks).
Reviewed by: Severin
Differential Revision: https://developer.blender.org/D13312
This enables calling code to deal with the blendfile handle themselves,
BKE_blendfile_link then just borrows, uses this handle and does not
release it.
Needed e.g. for python's libcontext system to use new
BKE_blendfile_link_append code.
Part of T91414: Unify link/append between WM operators and BPY context
manager API, and cleanup usages of `BKE_library_make_local`.
This enables calling code to deal with the blendfile handle themselves,
BKE_blendfile_link then just borrows, uses this handle and does not
release it.
Needed e.g. for python's libcontext system to use new
BKE_blendfile_link_append code.
Part of T91414: Unify link/append between WM operators and BPY context
manager API, and cleanup usages of `BKE_library_make_local`.
This was broken by rB0c3b215e7d5456878b155d13440864f49ad1f230.
The caching of loaded exr files needed some special treatment.
Differential Revision: https://developer.blender.org/D13313
This was probably broken by rB5c2330203e11e0d916960218b07d88d2193bf526.
For now just add the padding back in a spreadsheet specific way.
Differential Revision: https://developer.blender.org/D13315
There was a missing normals layer that was requested by the data transfer
modifier from the target object. The normal layer was correctly added to
the target object. However, it never reached the data transfer modifier
because the mesh was copied in `BKE_object_get_evaluated_mesh`
(in the call to `get_mesh_for_write`) and the copy does not include the normals
layer.
The solution is to not use `get_mesh_for_write` here which was only used
because `BKE_object_get_evaluated_mesh` returns a non-const `Mesh *`.
Mid term, it should actually return a `const Mesh *` to avoid the confusion.
Differential Revision: https://developer.blender.org/D13319
For some users, dropping assets into preview area may be more practical
due to space constraints or it may be just more intuitive.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D13311
For using the Outliner and/or the Asset Browser as scene independent
tools to organize a/v source material is necessary for the users to be
able to drag and drop data blocks into the VSE. This was also an
unfulfilled design target for the Outliner Gsoc project.
Datablocks won't be used directly. Path to file will be passed to strip
add operator instead.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D13304
Use the correct device function (hipDeviceGet) for multi GPU setups, instead
of hipGetDevice which just returns the default device.
Differential Revision: https://developer.blender.org/D13323
We already supported previews for lights, just didn't actually use them
when making a light object an asset. They were only used when making the
light data itself an asset.
Mistake in e7bea3fb6e.
We should only skip preview generation for objects that don't support
preview rendering, not completely forbid accessing preview data of such
IDs.
BVH2 triangle intersection was broken on the GPU since packed floats can't
be loaded directly into SSE. The better long term solution for performance
would be to build a BVH2 for GPU and Embree for CPU, similar to what we do
for OptiX.
Fix problem with duplicated initial character when initiating or
switching to new windows. This is done by updating our copies of state
and modes from the new window when it receives WM_IME_SETCONTEXT
message. This problem and fix are only for the Windows platform.
* Rename "Auto Tiles" to "Use Tiling", it's not really automatic and
confusing with the old auto tile size add-on.
* Rename "Adaptive" scrambling distance to "Automatic", to avoid confusion
with adaptive sampling.
Fix problem with duplicated initial character when initiating or
switching to new windows. This is done by updating our copies of state
and modes from the new window when it receives WM_IME_SETCONTEXT
message. This problem and fix are only for the Windows platform.
Add the following methods to the CurveEval class:
total_length() : returns the total length of the curve without needing to
allocate a new array
total_control_point_size() : returns the total number of control points without
needing to allocate a new array
* Rename "Auto Tiles" to "Use Tiling", it's not really automatic and
confusing with the old auto tile size add-on.
* Rename "Adaptive" scrambling distance to "Automatic", to avoid confusion
with adaptive sampling.
Use a map to speed up search for UI block names.
Time to redraw the node editor was decreased from
around 75-120ms to 40-70ms in a tree with many
Geometry Nodes.
Differential Revision: https://developer.blender.org/D13225
According to Blender selection rules, selections should be flushed
to containing elements. Added an EDMB_select_flush() after edit
mode booleans or intersects are done. Hopefully this doesn't break
any scripts that might have been depending on the old (broken) behavior.
Happens when device runs out of memory and Cycles is moving some
textures to the host memory.
The delayed memory free for OptiX BVH was moving data from one
device_memory to another, leaving the original device memory in
an invalid state. This was ruining the allocation map in the CUDA
device which is using pointer to the device_memory.
This change makes it so the memory pointer is stolen from BVH
into the delayed memory free list.
Additionally, forbid copying and moving instances of device_memory
and added sanity checks in the device implementation.
Differential Revision: https://developer.blender.org/D13316
This allows to reduce signature of several functions, and make it eaiser
to integrate more higher-level usages later on.
This should be a non-behavioral-change commit.
Part of T91414: Unify link/append between WM operators and BPY context
manager API, and cleanup usages of `BKE_library_make_local`.
This removes the last main usage of BLO's instantiation code.
Also required some limited refactoring of BKE_blendfile_link_append's
instantiation to make it more modular, and usable by both linking and
appending code paths.
NOTE: This should be a non-behavioral change commit.
Part of T91414: Unify link/append between WM operators and BPY context
manager API, and cleanup usages of `BKE_library_make_local`.
This will allow to expose all those advanced features of the WM
operators to other parts of the code, like the python library context
manager, copy/paste code, etc.
This is expected to be a strictly no-behavioral-change commit.
Part of T91414: Unify link/append between WM operators and BPY context
manager API, and cleanup usages of `BKE_library_make_local`.
Maniphest Tasks: T91414
Differential Revision: https://developer.blender.org/D13222
A good sphere preview material has a 1:1 UV ratio (so we see squares as
least distorted as possible), as well as good poles.
Square UV:
The original sphere expected a 2:1 panorama to be mapped to it. This
patch changes that (I scaled Y by 0.5) so that square textures look ok.
Poles:
The original sphere had a low initial resolution, so no ammount of
subdivision would fix the poles.
The sphere has a subdivision modifier with 0 resolution. Later (3.1?) I
want to try to change the resolution on-the-fly based on whether the material
has a displacement map.
Old sphere (1.9K vertices):
{F11845752, size=500px}
New sphere (2.0K vertices):
{F11845710, size=500px}
Differential Revision: https://developer.blender.org/D13309
`IMB_moviecache` is implemented as a singleton. When destructing the
singleton via `IMB_moviecache_destruct` it will not be created anymore
resulting inusage of unallocated memory and potentional memory
corruption.
When running blender this doesn't happen, but when creating images in
test cases the moviecache should be able to be recreated after it is
destroyed.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D13287
This patch separates the static-part from the dynamic-part when
generate brush masks. This makes the generation of brush masks 2-5 times
faster depending on the size of the brush.
More improvements can be done, this was just low hanging fruit.
This regression was introduced by D11832, but there was problems before
that as well. I seem to have missed it in review. See the differential
revision for a screenshot of the difference.
Differential Revision: https://developer.blender.org/D13216
It seems that update_from_old assumed there would be an old
tree view available in the old block. This works for the asset browser
because the tree is always drawn, but for the spreadsheet that depends
on having an active object, which isn't necessarily always true.
Differential Revision: https://developer.blender.org/D13301
Generating curve mask for 2d texture painting had some hard-coded
parameters that eventually weren't used in the algorithm (hardness and
rotation of the brush). This patch removes these parameters.
Curve mask generation is done during 2d texture painting. There are some
performance issues in this part of the code. Before addressing those we
move the code to CPP.
New drag&drop reordering code would call constraints reordering operator
with the generic context, and not the one from the panel's layout.
missing the "constraint" member which is mandatory for poll function to
properly deal with override vs. local constraints.
This commit fixes it by generating a temp bContextStore in the panel
re-ordering callback.
NOTE: this fix will have to be extended to modifiers (which happen to
work currently because they have an 'active' status), and gpencil
modifiers (which are also broken currently).
Differential Revision: https://developer.blender.org/D13291
The idea behind this change is the same as in
rB6ee2abde82ef121cd6e927995053ac33afdbb438.
A `MultiFunction::debug_parameter_name` method could be
added separately when necessary.
Previously, the function names were stored in `std::string` and were often
created dynamically (especially when the function just output a constant).
This resulted in a lot of overhead.
Now the function name is just a `const char *` that should be statically
allocated. This is good enough for the majority of cases. If a multi-function
needs a more dynamic name, it can override the `MultiFunction::debug_name`
method.
In my test file with >400,000 simple math nodes, the execution time improves from
3s to 1s.
This allows the use of better/more readable data structures,
and will also make some refactors to the search button easier.
The build completed on the buildbot for all platforms.
A recent security update to macOS 10.15.7 causes crashes when using Eevee and
various other 3D viewport features. It appears that glGenerateMipmap is
broken, causing a crash whenever its commands are flushed/submitted to the GPU.
Ideally this would be fixed in a driver update, however it's unlikely this will
happen. Earlier macOS versions have been receiving security updates for 2 years,
and that window has just passed for 10.15. Further, computers with these GPUs
can't upgrade to a newer macOS version.
As a workaround, disable mipmaps on these GPUs, by setting the mipmap max level
to 0 and not calling glGenerateMipmaps. Effects like depth of field also use
mipmaps, but fill in the mip levels by other means. In those cases we keep the
mipmap level.
Differential Revision: https://developer.blender.org/D13295
This fixes the the app crash happening when trying to render smoke as a dense
3D texture. The changes are related to matching up hipew with the actual HIP
headers.
Differential Revision: https://developer.blender.org/D13296
Same fix as rB0a3b4d4c64f1, but this time for greasepencil.
To repeat: dopesheet in greasepencil mode was ignoring the temporariy
visibility flag of collections. As a result, even though the dopesheet
was supposed to show animation data of visible greasepencils only was
still showing such data of greasepencils that were hidden by hiding
their collection.
Updates the Transfer Attributes and Capture Attributes nodes
to support attributes from instances.
Differential Revision: https://developer.blender.org/D13292
This patch removes a bunch of specific code for drawing the spreadsheet
data set region, which was an overly specific solution for a generic UI.
Nowadays, the UI tree view API used for asset browser catalogs is a much
better way to implement this behavior.
To make this possible, the tree view API is extended in a few ways.
Collapsibility can now be turned off, and whether an item should
be active is moved to a separate virtual function.
The only visual change is that the items are now drawn in a box,
just like the asset catalog.
Differential Revision: https://developer.blender.org/D13198
This isn't a problem in 3.0 or master, but I'm porting the spreadsheet
data set region to a tree view and ran into this. This line needs to
whether the function is empty before calling it.
Differential Revision: https://developer.blender.org/D13197
Now that `node_intern.hh` is a C++ header, we can use C++ types
there. This patch replaces the linked list of dragged links with a
vector. Also, the list of drag operator custom data, `nldrag`, doesn't
seem to need to be a list at all, so I just made it a unique pointer.
Differential Revision: https://developer.blender.org/D13252
Use the `GPU_SHADER_3D_POLYLINE_UNIFORM_COLOR` shader instead of `GPU_SHADER_2D_LINE_DASHED_UNIFORM_COLOR`.
This is just a partial solution as "protected" fcurves still use the dashed shader.
Differential Revision: https://developer.blender.org/D13290
CC-BY Blender Studio https://studio.blender.org
Update the splash artwork for the daily builds (`master`) to
celebrate the beginning of a new major series in Blender.
The badges of the Development Fund membership levels have been removed for
a simpler design, and the font matches the one used elsewhere in blender.org
After rB97533eede444217b, instances have their own attribute domain,
but the spreadsheet code worked under the assumption that the component
used the point domain. Old files have to re-select the instances data
source to make it properly active
Adds an attribute provider for instance attributes.
A new domain `ATTR_DOMAIN_INSTANCE` is implemented.
Instance attributes are not yet realized correctly.
Differential Revision: D13149
With very long ray distance, OptiX ends up traversing many BVH nodes due to
a feature that improves precision. However this causes very slow rendering.
We now avoid generating such long rays by rejecting the few samples that have
long ray distances and very low probability of being generated. This should not
meaningfully affect render results.
Thanks to Sergey and Patrick for the investigation.
After rBb9febb54a492, the evaluated mesh from a curve is now presented
to render engines as a separate mesh object, but some code still assumed
that a curve object itself could have an evaluated mesh. However, this is
still true for surface objects and metaballs, which don't
use geometry sets yet.
Differential Revision: https://developer.blender.org/D13272
Asset libraries should be directories on disk. By manually entering a
file path it was possible to have a single blend file as asset library,
but that was not a designed-for situation, and it doesn't play well
with the asset catalog system.
Original implementation was a quick prototype which should have never
landed as-is in master. It had very limiting constraints and did not
allow for any real further development.
This commit fixes the internal implementation to make more sensible,
maintainable and evolutive.
NOTE: This commit introduces another forward-incompatibility in the
Blender file format: Files saved after this commit won't open properly
in older versions of blender regarding local inserted constraints or
modifiers into overrides of linked data.
NOTE: Technical details: The 'anchor' item name/index is now stored in
`subitem_reference_` members, and the actual 'source' item name/index is
stored in `subitem_local_` members of the override property operation
data.
Previously, only the `subitem_local_` members were used, storing the
anchor item name/index, and assuming the 'source' item was always the
next in the list.
Milestone I of T82160.
Maniphest Tasks: T82160
Differential Revision: https://developer.blender.org/D13282
If a valid matching string is found, return that item, otherwise
fallback to the item matching the given index, if any.
This will be useful in RNA override code, and potentially other
areas where data in lists can be referenced by their names or indices.
The old code did not work when there were multiple ids with
the same name (which can happen when ids are linked in).
The solution is to use the session ids instead. Those are different
even when two ids have the same name.
Differential Revision: https://developer.blender.org/D11116
D13044 allowed the link color overlay to be used with custom sockets.
This no longer works due to a condition that checks if the socket is
standard or not, which was in place to avoid bad indexing of the
std_node_socket_colors array. Since that array is no longer used, this
condition needs to be removed.
Differential Revision: https://developer.blender.org/D13274
Reviewed By: Hans Goudey
Constraints, modifiers and NLA tracks can now report from RNA whether
they are defined as comming from the override's reference linked data,
or are local to the override.
This is a bit similar to rBb7260ca4c9f4b7618c9c214f1270e31d6ed9886b.
Sometimes a group node may not reference a node group
because it was linked and can't be found.
Separating geometry nodes into a new library will make it
easier to improve compile times with features like unity
builds and precompiled headers.
Differential Revision: https://developer.blender.org/D13261
Offsets for meta strip were invalid. No steps to reproduce the issue are
available, but it is quite possible that there are files with incorrect
state after issues with meta strips were fixed.
Ensure correct offsets for meta strips in versioning code.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D13257
The existing RNA CollectionRef class only offers a length() operation
which is sometimes used for checking if the collection is empty. This is
inefficient for certain collection types which do not have a native
length member; the entire list is iterated to find the count.
This patch creates an explicit empty() method to be used in such cases
for better semantics. Additionally, many collection types will behave
more efficiently when using the new method instead of checking length.
Making use of the new method will follow separately.
Differential Revision: https://developer.blender.org/D12314
Now with Geometry Nodes in Blender,
trees can become much bigger than before.
This changes the minimum zoom value in the node editor.
Differential Revision: https://developer.blender.org/D13254
Socket drawing can be heavy with many nodes.
This patch skips drawing them on scale < 0.2
when they are barely visible anyway.
Differential Revision: https://developer.blender.org/D13255
This feature has been desired for some time:
- https://rightclickselect.com/p/ui/Tqbbbc/allow-navigating-while-transforming (See comments);
- D1583;
- T37427;
In short, blocking navigation during transform limits the user to move the object only to visible areas within the screen and hinders the allocation of objects within closed meshes.
The node editor is also impaired because some nodes are far between them and the connectors are too small.
The only disadvantage of this patch (as I see it) is the conflict with the existing key map:
MIDDLEMOUSE:
- enable axis constrain in 3D view;
WHEELDOWNMOUSE, WHEELUPMOUSE, PAGEUPKEY, PAGEDOWNKEY:
- change the threshold of the proportional edit;
So the patch solution was to change these keymaps:
- MIDDLEMOUSE to Alt+MIDDLEMOUSE;
- WHEELDOWNMOUSE, WHEELUPMOUSE, PAGEUPKEY, PAGEDOWNKEY to Alt+(corresponding key);
When you use this new keymap for the first time in the proportional edit, it may seem strange due to the custom of using it (both in View2D and View3D).
But quickly the user gets used to it.
Alternatively we can add an option to the user preferences ([] Allow navigating while transforming). (I'm not much fan of this option).
The patch was done on branch2.8. But maybe it's a good idea to apply it to 2.79
Differential Revision: https://developer.blender.org/D2624
This patch implements part of what was stated in {T66484}, with respect to `Base Point`.
## Introduction
The snapping feature of the transform tools has a variety of applications:
- Organization of nodes.
- Positioning of frames in precise time units.
- Retopology with snap to face
- Creation of armatures with bone positioning through the snap to volume
- Precise positioning of 3D or 2D objects in the surrounding geometry (CAD modeling)
The goal of this document is to make it more powerful for precision modeling and still supporting the old use cases without extra complexity.
The main topic addressed here is the introduction of a **interactive mode for setting a snap source** (See terminology).
## Terminology
* **Snap Source**: 3d coordinate * we want to snap from. (Currently defined by the `Snap With` options: `Closest`, `Center`, `Median` and `Active`).
* **Snap Target**: 3d coordinate* we want to snap to. (Vertices, Edges, Faces, Grid...)
## Interactive Mode for Editing a Snap Source
Currently the fixed snap point can only be obtained through the `Snap With` options. So it's a little tricky for the user to define a snap source point having so much geometry on an object.
Because of this, the user needs to resort to impractical solutions to get a point in the geometry.
See example of an impractical use:
{F11714181, layout=left, width=960, alt="The user used the cursor (which can be snapped) to choose the snap origin point."}
The user used the cursor (which can be snapped) to choose the snap source point.
While it is possible to work around this current limitation, it is important to reduce the number of steps and allow the user to set a snap source point through an optional interactive mode during a transformation.
The proposed solution is to be able to move the current snap source point through a modal modifier activated with a key (eg. B).
The snap source point can thus "snap" to the elements in the scene (vertex, mid-edge, Lamp, …) during this mode.
{F9122814, layout=left, width=960, alt="Base Point Snap, example of transform operation via the shortcut (not the tool). After pressing g and the snap base change shortcut (e.g., shift + ctrl) the user set the base point. The base point is then visible until the end of the operation. The z axis constrains the final position."}
## Implementation Details
- The feature will only be available in 3D View.
- The feature will only be available for `Move`, `Rotate` and `Scale` transform modes.
- The snap source editing will be enabled with a single click on the modifier key (B).
- Having a snap point indicated, the new snap origin point will be confirmed with the same buttons that confirms the transformation (but the transformation will not be concluded).
- The snap source editing can be canceled with the same key that activated it (B).
- If the transformation is done with "release_confirm" (common for gizmos), the new feature cannot be enabled.
- During the transformation, when enabling the feature, if the snap option is turned off in the scene, the snap will be forced on throughout the rest of the transformation (unless interactive mode is canceled).
- During a transformation, if no snap target is set for an element in the scene (Vertex, Grid...), the snap targets to geometry Vertex, Edge, Face, Center of Edge and Perpendicular of Edge will be set automatically.
- Snap cannot be turned off during the snap source editing.
- Constraint or similar modification features will not be available during the snap source editing.
- Text input will not be available during the snap source editing.
- When adding multiple snap points (A) the new prone snap source point will be indicated with an "X" drawing.
{F11817267}
Maniphest Tasks: T66484
Differential Revision: https://developer.blender.org/D9415
Add the "Convert Old Pose Library" operator to the old pose library (in
the Armature properties editor). This makes it more discoverable; before
it only was available in the Action editor.
When filtering the asset browser, also include results that have partial
tag matches. So searching for "xite" will include results tagged with
"excited".
This brings the tag filtering in line with other search boxes in
Blender. Later we might want to provide users with more options for
prefix-only ("excite" would match "excited", but "xited" would not) or
only exact matches.
The Cycles accurate mode was removed, but the Eevee option for this has
a different meaning and should not have been removed. The Eevee accurate
makes cryptomatte accumulate for every sample, which Cycles has always
done regardless of any option.
MSL requires that constant address space literals be declared at program
scope. This patch moves the `blackbody_table_r/g/b` and `cie_colour_match`
constants into separate files so they can be declared at the appropriate scope.
Ref T92212
Differential Revision: https://developer.blender.org/D13241
This patch contains many small leftover fixes and additions that are
required for Metal-enablement:
- Address space fixes and a few other small compile fixes
- Addition of missing functionality to the Metal adapter headers
- Addition of various scattered `__KERNEL_METAL__` blocks (e.g. for
atomic support & maths functions)
Ref T92212
Differential Revision: https://developer.blender.org/D13263
Previously the check was done based on dimension of image and if any
of dimensions were larger than tile size tiling was used.
This change makes it so that if image does not exceed number of pixels
in the tile no tile will be used. Allows to render widescreen images
without tiling.
Differential Revision: https://developer.blender.org/D13206
The calculation based on preserving device occupancy was conflicting
with the fact that time limit needs to render less samples at the last
round of render work.
For example, rendering BMW27 for 30sec on i9-11900k was actually
rendering for almost a minute. Now the render time limit is respected
much more close.
Differential Revision: https://developer.blender.org/D13269
Build HIP kernels with NanoVDB, and patch NanoVDB to work with HIP.
This is a header only library so no rebuild is needed. The changes are being
submitted upstream to openvdb, so this patch should be temporary.
Thanks Thomas for help testing this.
For data-blocks from the current file, the image-buffer for dragging
wasn't set at all. This wasn't intentional, dragging things in the Asset
Browser should just always show the preview.
stack_assign_if was used in the middle of creating the shader value blocks.
Which caused stack variables to be inserted in the middle of the shader value data.
This resulted in the shader node data no being in sequential order. This was also
the case for the wave texture wave node.
Reviewed By: brecht
Maniphest Tasks: T93102
Differential Revision: https://developer.blender.org/D13262
This function can be used to "dissolve" meta strip anywhere in strip
hierarchy. This has same effect as `meta_separate` operator.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/T91005
This patch changes the thumbnails' height used for image and movie
strips by choosing the proper size according to the VSE's text overlay
settings: i.e. thumbnails use the whole strip's height when no overlay
text is displayed; otherwise, some space is left for the overlay.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D13043
Some when adding multiple movies at once and only some of them have
audio track, this causes crash on NULL dereference. Issue was introduced
in bdbc7e12a0 to align sound and video properly.
Check if sound is present in movie file. If it's not, don't try to align
sound with video.
This patch adds a CMake option "WITH_CYCLES_DEBUG" which builds cycles with
a feature that allows debugging/selecting the direct-light sampling strategy.
The same option may later be used to add other debugging features that could
affect performance in release builds.
The three options are:
* Forward path tracing (e.g., via BSDF or phase function)
* Next-event estimation
* Multiple importance sampling combination of the previous two methods
Such a feature is useful for debugging light different sampling, evaluation,
and pdf methods (e.g., for light sources and BSDFs).
Differential Revision: https://developer.blender.org/D13152
Introduce a packed_float3 type for smaller storage that is exactly 3
floats, instead of 4. For computation float3 is still used since it can
use SIMD instructions.
Ref T92212
Differential Revision: https://developer.blender.org/D13243
Previously, node types had a callback that creates internal links. Pretty
much all nodes used the same callback though. The exceptions are the
reroute node (which probably shouldn't be mutable anyway) and some
input/output nodes that are not mutable.
Removing the callback helps with D13246, because it makes it easier
to reason about which internal links are created and when they change.
In the future, the internal links should be part of the node declaration.
This cleans up part of the code that still set the flag manually. Also, this
change helps with D13246 because it makes it easier to tag the node
tree as changed when the availability of a socket changed.
This patch includes:
View vector fix for ortho back face.
Point on segment logic correction.
Better handling of boundary cases.
See review page for detailed description.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D13143
This patch includes:
View vector fix for ortho back face.
Point on segment logic correction.
Better handling of boundary cases.
See review page for detailed description.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D13143
This change was introduced in 997b5fe45d, to not display pixelated
thumbnails. However when VSE timeline height is made smaller, this
limits strip height.
Change limit, so one strip can occupy full height of VSE timeline
This commit contains a few mostly-related changes to this node:
- Add a warning when retrieving the geometry from the modifier object.
- Only create the output geometry when it is necessary.
- Decompose transform matrices in a more friendly way.
- Use default return callbacks like other newer nodes.
Differential Revision: https://developer.blender.org/D13232
It's valid for a node group connected to the modifier not to
have a geometry input, but I didn't consider that case
with the last change I made here, f3bdabbe24.
Differential Revision: https://developer.blender.org/D13231
The spline code, especially Bezier splines, often make use of lazily
evaluation and caching. In order to do that, they use mutex locks.
When multi-threading, this can lead to problems. Further detail
can be found in rBfcc844f8fbd0d1.
To fix the deadlock, isolate the task before multi-threading
when holding a lock.
Differential Revision: https://developer.blender.org/D13229
Due to asynchronous process, the preview for a given image may be
generated several times.
This regenerates many thumbs unnecessarily.
The solution is to add the `FILE_ENTRY_PREVIEW_LOADING` flag for file
entries that are still in the thread queue.
So this flag is checked not to redraw the thumb when it is still being
created on a different thread.
Differential Revision: https://developer.blender.org/D11150
Fix a crash when a hair system's `ParticleSettings` ID datablock was
linked from another file but couldn't be found. This results in default
settings, with `type = PART_EMITTER`, where the particle data still has
a non-NULL `hair` pointer. Previously, copies of such a particle system
would NOT copy hair data for non-hair particle systems, hence the
pointer of the copy pointed to the original data, which got freed (at
least) twice upon closing the blend file.
This is now fixed by always copying the hair data, regardless of the
particle system type.
Reviewed by: mont29
Differential Revision: https://developer.blender.org/D13245
Add comment explaining `MEM_dupallocN` is NULL-safe, in that it returns
NULL when it receives a NULL pointer. This is currently true for both
implementations of the function (`MEM_lockfree_dupallocN` and
`MEM_guarded_dupallocN`), and will be expected of other implementations
as well.
No functional changes.
Add a new "experimental" debug option `show_asset_debug_info`, and use
that to determine the visibility of the active asset's catalog UUID and
simple name. Previously this was only determined by the "Developer
Extras" option, which meant it was visible in too many situations. It's
not really a "developer extra", and really just a debugging tool, so the
new option is more in line with its purpose.
Reviewed by: Severin
Differential Revision: https://developer.blender.org/D13242
This patch adapts the existing volumetric read/write lambda functions for Metal. Lambda expressions are not supported on MSL, so two new macros `VOLUME_READ_LAMBDA` and `VOLUME_WRITE_LAMBDA` have been defined with a default implementation which, on Metal, is overridden to use inline function objects.
This patch also removes the last remaining mention of the now-unused `ccl_addr_space`.
Ref T92212
Reviewed By: leesonw
Maniphest Tasks: T92212
Differential Revision: https://developer.blender.org/D13234
In 499dbb626a, the background color of drag tooltips were changed so
text becomes more readable. But multiple people were touching the same
code, so the disabled hint tooltips didn't get the same tweak. They
would benefit from them even more, since the red text is even harder to
read on the transparent background than the regular, white text.
Dispose of GHOST system paths when tearing down `BlendfileLoadingBaseTest`
and some other test cases. This prevents a memory leak.
A better solution would be to rework Blender's initialisation & teardown
structure, but that's outside the scope of this fix.
No functional changes to Blender.
While there is nothing technically that would cause issues when moving a
catalog into itself (it just changes the path of the catalog, and the
missing parent catalogs will be created), it seems broken to the user.
So disable this in the drag & drop code for asset catalogs.
Refreshing the assets requires `file_OT_asset_library_refresh` in the
asset browser, and `asset_OT_list_refresh` for the asset view. Both
are now done from `ASSET_OT_open_containing_blend_file`.
Python Operator templates made accessible from respective menus
(required to also use F3 search for quick access)
Also fixed Modal Draw Operator id_name (had duplicate name from other template)
Maniphest Tasks: T90866
Differential Revision: https://developer.blender.org/D13182
Goals of this refactor:
* Simplify creating virtual arrays.
* Simplify passing virtual arrays around.
* Simplify converting between typed and generic virtual arrays.
* Reduce memory allocations.
As a quick reminder, a virtual arrays is a data structure that behaves like an
array (i.e. it can be accessed using an index). However, it may not actually
be stored as array internally. The two most important implementations
of virtual arrays are those that correspond to an actual plain array and those
that have the same value for every index. However, many more
implementations exist for various reasons (interfacing with legacy attributes,
unified iterator over all points in multiple splines, ...).
With this refactor the core types (`VArray`, `GVArray`, `VMutableArray` and
`GVMutableArray`) can be used like "normal values". They typically live
on the stack. Before, they were usually inside a `std::unique_ptr`. This makes
passing them around much easier. Creation of new virtual arrays is also
much simpler now due to some constructors. Memory allocations are
reduced by making use of small object optimization inside the core types.
Previously, `VArray` was a class with virtual methods that had to be overridden
to change the behavior of a the virtual array. Now,`VArray` has a fixed size
and has no virtual methods. Instead it contains a `VArrayImpl` that is
similar to the old `VArray`. `VArrayImpl` should rarely ever be used directly,
unless a new virtual array implementation is added.
To support the small object optimization for many `VArrayImpl` classes,
a new `blender::Any` type is added. It is similar to `std::any` with two
additional features. It has an adjustable inline buffer size and alignment.
The inline buffer size of `std::any` can't be relied on and is usually too
small for our use case here. Furthermore, `blender::Any` can store
additional user-defined type information without increasing the
stack size.
Differential Revision: https://developer.blender.org/D12986
`ABCPointsWriter::is_supported` already checked for valid particle
system types (liquid, spray, foam, bubbles, ...).
`AbstractHierarchyIterator::make_writers_particle_systems` did not
create a writer for these though, so now bring these in line and also
create writers for these.
With transform tools, it is expected to see backgroud image when overlay
is transformed.
Alpha over caused performance to be not optimal when used with opaque
media. This should be addressed with D12914 at least partially. There
may be some corner cases not addressed.
Differential Revision: https://developer.blender.org/D12952
When scaling down image, users expect to see background, which doesn't
currently happen in VSE. This is because strips use cross blend mode by
default, because alpha over is much slower. Reason is, because any area
of image can be transparent, and therefore it can't have early out
implemented in a way that cross blend mode can.
Flag images rendered by codecs that don't support transparency as fully
opaque and implement a form of early out for alpha over blend mode.
When rendering image stack, 2-input effects are ignored on the
"way down". Alpha over needs rendered overlay image to decide whether it
will use only overlay or background too. Therefore overlay can be
rendered safely before it is used. Image flags can be checked and it can
be freed if needed. Freeing doesn't cause any performance degradation,
because image is always stored in cache.
This feature does not improve blend mode performance. In summary, it
only allowes for having alpha over blend mode on background images
without suffering from lower performance.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D12914
`v2d->tot` rect was set for backdrop drawing. Set range before drawing
scrollbars.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D13099
Some RNA properties and operators did not invalidate cache or did it
incorrectly.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D13101
Issue was caused by incorrect FFmpeg asynchronous decoding API. In most
cases, decoder returns 1 frame each time it is fed by 1 packet. Here
decoder wanted to return more frames, but our code always expected only
one.
Before sending new packets to decoder, check if there are frames to
receive. If there are, process them, otherwise continue decoding as
usual.
Reviewed By: zeddb, sergey
Differential Revision: https://developer.blender.org/D13079
When proxy size lower than 100% is used, clip strips are rendered with
incorrect image size.
This is because if proxies aren't enabled in movieclip, it automatically
falls back on rendering original media. Sequencer doesn't have knowledge
about this and since 9c99292a16 it assumes that image is proxy,
because it explicitly requested this size.
Check movieclip flag to see if proxies are enabled.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D13080
There were two issues:
- The third math node socket does not exist in old enough files.
- The comment incorrectly referred to the vector math node.
Differential Revision: https://developer.blender.org/D13219
When cut an stroke using the option Flat Caps, the falt was not done if the cut was done in the middle of the stroke.
Now the flat is applied to the segments created and also some cleanup of the code done.
Cause of this issue is that Custom Node Sockets info type was
initialized as SOCK_FLOAT when registering. Areas within the core that
would ignore custom socket types by checking its type would use the
socket as being a float type.
When custom node sockets have a property called default_value blender
tries to store it as an internal default value what failed in debug
builds.
This patch will set the socket type to SOCK_CUSTOM when registering a
custom socket type and allow, but skip storage of custom default values.
In this case the default values should already be stored as custom
properies.
Reviewed By: campbellbarton, JacquesLucke
Maniphest Tasks: T89260
Differential Revision: https://developer.blender.org/D13174
This continue the effort to implement virtual shadow mapping.
This includes:
- Spot cone culling of tile.
- Tile vs. view frustum tagging.
- Shadowmap Page allocation / freeing.
- Rendering to 4K buffer only tiles that needs it.
- Copying to shadow atlas.
This debug buffer is automatically bound if a shader is including
`common_debug_lib.glsl`. One buffer is created for each shading group
using such a shader.
The shader can then use the functions from that file to draw debug
lines. There is a hardcoded limit of line one buffer can contain. Make
sure to only output lines for a few threads at most.
Under the hood this uses a vertex buffer bound as SSBO that contains
the number of verts and all the positions and colors packed into 1 vec4.
We render by just rendering the whole buffer.
All unused vertices are initialized with NaN positions and will not be
drawn.
Allow the use of floating-point values for font point sizes, which
allows greater precision and flexibility for text output.
See D8960 for more information, details, and justification.
Differential Revision: https://developer.blender.org/D8960
Reviewed by Campbell Barton
Fix own mistake in rB7061d1e39fe
In my attempt to quickly address T92838, along with the original bug, I
made a nonsensical choice to use the limiter lock to guard the check
against the cache item itself. While harmless, it is not necessary and
semantically wrong / potentially confusing to future readers of the code.
Differential Revision: https://developer.blender.org/D13122
Suppressing the splash was only done when passing in an argument from
the command line.
Remove G.file_loaded, as it is misleading, only set once on startup,
replace with G.relbase_valid which is used everywhere else to check
if the file path should be used.
Support the ability to close relevant characters like '(', '[' and '{'.
It will also delete the pair character if they're empty.
Ref D13119
Reviewed By: campbellbarton
This reverts commit 6b4ca78108.
A simpler fix was used for 3.0, but rBd845ba481c6d2ef already contained
a more complete solution to the problem of inconsistent socket ids.
Previously, unique identifiers for sockets were created automatically,
sometimes using .001 and sometimes _001. Now they are created
manually with the second format, but some files were saved with .001
format. I think this was only an issue in the vector math node.
rBd845ba481c6d fixed this problem in 3.1, but in a more general way.
After I merge this patch to 3.1, I will revert it, since the versioning
added in that commit will make this redundant.
Differential Revision: https://developer.blender.org/D13209
The node does support curves, but only in index mode (see T88630)
So add a specific error message for the nearest mode, and let the
node support curves in the declaration.
Differential Revision: https://developer.blender.org/D13205
We need to increase GPU memory usage a bit. Unfortunately we can't get away
with writing either reflection or transmission passes because these BSDFs may
scatter in either direction but still must be in a fixed reflection or
transmission category to match up with the color passes.
Previously both `.` and `_` were used as separators when finding
a unique name for a socket. This removes the use of `.`, since `_`
was more common. It also does versioning for all of a file's node
trees to make sure that they all use the `_` convention.
Differential Revision: https://developer.blender.org/D13181
Partially reverts commit rB440a3475b8f5410e5c41bfbed5ce82771b41356f because
"optixDenoiserComputeIntensity" does not currently support input images that are not packed (the
"pixelStrideInBytes" field is not zero). As a result the intensity calculation would take into account
data from other passes in the image, some of which was scaled by the number of samples still and
therefore produce widely incorrect results that then caused artifacts in the denoised image.
Maniphest Tasks: T93029
The UI was always drawing all buttons in a layout, no matter if they
were scrolled out of view (as in, outside of the visible part of the
region) or not. This means it's doing quite some work that can be
avoided.
UI drawing generally isn't a big bottleneck in Blender, so I don't
expect huge speedups from this. But while playing back animation, we do
redraw a fair bit of the UI, so in cases where there are many buttons
out of view, it may bring a little FPS boost. E.g. say in complex node
trees (the node editor is redrawn on animation playback in case there
are animated values that need updated UI feedback). This also mitigates
the issue in T92922 significantly.
Differential Revision: https://developer.blender.org/T92922
Reviewed by: Brecht Van Lommel
UI_GetThemeColorBlendShade4fv incorrectly changing alpha by the amount
of the shading offset.
See D9944 for more details.
Differential Revision: https://developer.blender.org/D9944
Reviewed by Hans Goudey
UI_GetThemeColorBlendShade4fv incorrectly changing alpha by the amount
of the shading offset.
See D9944 for more details.
Differential Revision: https://developer.blender.org/D9944
Reviewed by Hans Goudey
Blender 3.0 will only support single-frame Actions in the pose library.
The goal of this patch is to lay the groundwork for making it possible
for the Asset Browser to reject/hide "animation snippet" Action assets.
Determining whether an Action has one or more frames (i.e. whether it
has a single pose or animation) requires inspecting the Action itself,
and thus loading the data-block itself. This would make it impossible to
quickly determine from the asset browser.
To solve this, the Action is inspected before saving, and a
`"is_single_frame"` boolean (well, 0/1 integer) IDProperty is added.
Reviewed by: Severin
Differential Revision: https://developer.blender.org/D13202
Channel protection flags were only used in global mode,
this doesn't make any sense, especially for rotation and scale.
Follow pose-bones, only using protection flags for
local & gimbal orientation.
Adds a boolean field output containing a selection of the
points of the star that are controlled by the outer radius
of the star.
Differential Revision: https://developer.blender.org/D13097
The root of the problem lies in bug in OIIO which we can work around
from our side (which does not affect pack memory usage).
Thanks Brecht for finding the root cause!
Differential Revision: https://developer.blender.org/D13186
When the file browser is in asset browser mode, it sets the callback
`filelist->prepare_filter_fn` to an asset browser specific function. This
function will segfault if there is no current asset library. Switching back
from asset browser to file browser would not reset that callback to
`NULL`, causing it to be called and crash Blender. This is now fixed.
* Rename the 'copy' functions to make it clear they belong to the same
'group' and are to be used together.
* Fix `flag` parameter of `BKE_copybuffer_paste` being a short instead
of an int.
* Improve documentation.
Adds a method to profiler that can be used to check if it is active.
This is used to determine if stop_profiling and start_profiling
should be called.
| patch | Juans Scene UI 256 samples | Juans Scene bg 256 samples | junkshop UI | junkshop bg |
| No patch | 6:16.59 | 4:05.37 | 2:08.48 | 1:59.7 |
| D13187 | 4:12.15 | 3:57.36 | 2:07.25 | 1:58.16 |
| D13185 | 4.11.18 |3:54.74 | 2:07.44 | 1:58.03 |
| D13190 | 4:12.39 | 3:55.42 | 2:07.62 | 1:58.68 |
UI - means rendered from within Blender
bg - means rendered from the command line using ##blender -b scene.blend -f 1##
Reviewed By: sergey, brecht
Maniphest Tasks: T92601
Differential Revision: https://developer.blender.org/D13190
Adds a method to profiler that can be used to check if it is active.
This is used to determine if stop_profiling and start_profiling
should be called.
| patch | Juans Scene UI 256 samples | Juans Scene bg 256 samples | junkshop UI | junkshop bg |
| No patch | 6:16.59 | 4:05.37 | 2:08.48 | 1:59.7 |
| D13187 | 4:12.15 | 3:57.36 | 2:07.25 | 1:58.16 |
| D13185 | 4.11.18 |3:54.74 | 2:07.44 | 1:58.03 |
| D13190 | 4:12.39 | 3:55.42 | 2:07.62 | 1:58.68 |
UI - means rendered from within Blender
bg - means rendered from the command line using ##blender -b scene.blend -f 1##
Reviewed By: sergey, brecht
Maniphest Tasks: T92601
Differential Revision: https://developer.blender.org/D13190
The mirror modifiers merge option caused unnecessary re-ordering
to the vertex array with original vertices merging into their copies.
While this wasn't an error, it meant creating a 1:1 mapping from input
vertices to their final output wasn't reliable (when looping over
vertices first to last) as is done in
BKE_editmesh_vert_coords_when_deformed.
As merging in either direction is supported, keep the source meshes
vertices in-order since it allows the vertex coordinates to be extracted.
The code assumed that any geometry input that wasn't the first input
was a second geometry input. Fix by separating the warning for the
first input and for the number of geometry inputs.
Adds a vector offset field to the "Curve Handle Position Node".
This vector is added to the incoming position (which is the
implicit handle position if not connected) which will set the
position of the handle. Default is (0,0,0)
Differential Revision: https://developer.blender.org/D13035
This patch adds list colors to the light theme for the spreadsheet,
which are needed for the data set region. Addresses T92492.
Differential Revision: https://developer.blender.org/D13090
Remove outdated CUDA comments for bindless textures and cleanup some HIP comments that still mentioned CUDA.
Differential Revision: https://developer.blender.org/D13189
When Constructing bezier splines from dna, the positions of the
left/right handles were set directly in the internal vectors, by
requesting a reference to them. The problem is that
BezierSpline::handle_positions_left() calls ensure_auto_handles()
before returning the reference. That function does some calculations on
uninitialized memory if the positions array is not yet filled.
Differential Revision: https://developer.blender.org/D13107
The issue was caused by splitting happening twice.
Fixed by checking for split flag which is assigned to the both states
during split.
The tricky part was to write catcher data at the moment of split: the
transparency and shadow catcher sample count is to be accumulated at
that point. Now it is happening in the `intersect_closest` kernel.
The downside is that render buffer is to be passed to the kernel, but
the benefit is that extra split bounce check is not needed now.
Had to move the passes write to shadow catcher header, since include
of `film/passes.h` causes all the fun of requirement to have BSDF
data structures available.
Differential Revision: https://developer.blender.org/D13177
rB60fee69682ac39 only partially fixed the issue, `BlendFileReadReport
bf_reports` was now properly stored in `BPy_Library` `self` for the
lifetime of the context, but its `reports` member was still referencing
local variable to `bpy_lib_enter` function.
This patch exposes the sampling offset option to Blender. It is located in the "Sampling > Advanced" panel.
For example, this can be useful to parallelize rendering and distribute different chunks of samples for each computer to render.
---
I also had to add this option to `RenderWork` and `RenderScheduler` classes so that the sample count in the status string can be calculated correctly.
Reviewed By: leesonw
Differential Revision: https://developer.blender.org/D13086
Apply a local-workaround instead of adding support for this use-case
since pre-selection isn't the intended purpose of gizmos.
This also resolves a glitch where poly-build and loop cut would
briefly show loop-cut or poly-build pre-selection after transforming.
See gizmo_preselect_poll_for_draw note for more details.
#### Motivation
The View pie menu is a convenient way to access operators such as `Frame Selected` and `Frame All` which are usually mapped to `PERIOD` or `HOME` keys on the right side of most keyboard, making it hard hard to reach with the left hand.
The motivation for this patch comes from working with a 75% keyboard (no numpad). Most laptops face a similar problem.
#### Implementation
The View pie menu has been added to the following editors and sub-modes where applicable:
* Node Editor
* Video Sequencer
* Dopesheet
* Graph
* NLA
* Image
* Clip
* Outliner
More options could definitely be added to this menu for convenience, as long as it maintains the common options in the same place (Frame Selected on the left, Frame All on the right).
For positioning I went with the following layout:
{F11791186, size=full}
I've added `Zoom 1:1`to the Image Editor and the VSE Preview since there is no way to reset the zoom on keyboards without numpad (unless Emulate Numpad is turned on).
The Outliner uses `Show Active` and `Show Hierarchy` which are the closest ones to the equivalent in other editors. Should `Show Active` be renamed to `Frame Selected`?
The shortcut assigned is the same as the 3D Viewport (`ACCENT_GRAVE`).
#### Screenshots
Node Editor
{F11778387, size=full}
Dopesheet
{F11778400, size=full}
Graph
{F11778403, size=full}
Image Editor (Paint and View)
{F11791113, size=full}
Image Editor (Mask)
{F11791114, size=full}
UV Editor
{F11791119, size=full}
Clip Editor (Tracking)
{F11791137, size=full}
Clip Editor (Mask)
{F11791140, size=full}
Clip Editor (Graph)
{F11791151, size=full}
View operators are not yet implemented in Clip Editor Dopesheet mode (left a note about this in the menu poll).
Reviewed By: #user_interface, campbellbarton
Differential Revision: https://developer.blender.org/D13169
rBc473b2ce8bdbf8fa42 improved the situation somewhat, but
attribute search still crashes during animation playback, because
the UI search data references stale memory. The proper solution
is to allow the search to own data rather than just referencing it,
but I would prefer not to do that for 3.0. In the meantime, just
disable attribute search when animation is playing.
Differential Revision: https://developer.blender.org/D13179
This is due to a driver bug, so disable it for now until it gets resolved
in a future driver release.
Ref T92972
Differential Revision: https://developer.blender.org/D13167
It's unclear why this fails. Maybe the size of half4 is not the expected
8 bytes and adjacent pixels are overwritten. Or there is some bug in the
HIP compiler writing a struct into global memory, which we probably don't
do elsewhere in the kernel.
Thanks to Thomas, William and Jeroen for helping investigate this.
This commit adds modifier error messages to some of the cases
where the node group is configured improperly. It also clears the
geometry set when there is an error with the node group. This is
consistent to what we do in nodes themselves, and feels more
intuitive than passing the input geometry through the node group
silently.
Fixes T87142
This function was renamed in rB2bb9a465e6c0e1ca765, but it looks like
that commit missed changing the corresponding translation regular
expression.
Differential Revision: https://developer.blender.org/D13171
rB3a4c8f406a3a3bf0627477c6183a594fa707a6e2 changed the macros that create the film
convert kernel entry points, but in the process accidentally changed the parameter definition
to one of those (which caused CUDA launch and misaligned address errors) and changed the
implementation as well. This restores the correct implementation from before.
In addition, the `ccl_gpu_kernel_threads` macro did not work as intended and caused the
generated launch bounds to end up with an incorrect input for the second parameter (it was
set to "thread_num_registers", rather than the result of the block number calculation). I'm
not entirely sure why, as the macro definition looked sound to me. Decided to simply go with
two separate macros instead, to simplify and solve this.
Also changed how state is captured with the `ccl_gpu_kernel_lambda` macro slightly, to avoid
a compiler warning (expression has no effect) that otherwise occurred.
Maniphest Tasks: T92985
Differential Revision: https://developer.blender.org/D13175
When clearing geometry the runtime mutexes of a mesh were freed. This
resulted in crashes afterwards. The clear geometry is an RNA function so
would only effect when using from scripts.
This patch separates init/freeing of the mutexes from other code so they
can be used when needed.
Reviewed By: mont29
Maniphest Tasks: T91518
Differential Revision: https://developer.blender.org/D13142
The issue was that the `object_is_geometry` method was used in two different
contexts that expected the function to behave differently. So a recent change
that fixed `object_is_geometry` for one context, broke it for the other context.
The two contexts are:
* Check if a "real" object can contain a geometry to check if it has to be tagged
for sync after an update.
* Check if an object/instance actually is a geometry that cycles can work with.
I created a new `object_can_have_geometry` method for the first use case, instead
of trying to adapt the existing object_is_geometry method to serve both uses.
Additionally, I changed it so that a BObjectInfo is passed into `object_is_geometry`
to make it more explicit when this method is supposed to be used.
Differential Revision: https://developer.blender.org/D13135
First this was wrong for files written in 2.93 read into blender in 3.0
after the CyclesX merge.
Then this was fixed by versioning in rB6321dd3d4007.
But this caused files written in 3.0 to have this versioning applied as
well (leading to socket shifting).
Now only do the versioning for files created before the CyclesX
merge.
Maniphest Tasks: T92979
Differential Revision: https://developer.blender.org/D13173
This patch adapts the shared kernel entrypoints so that they can be compiled as MSL (Metal Shading Language). Where possible, the adaptations avoid changes in common code.
In MSL, kernel function inputs are explicitly bound to resources. In the case of argument buffers, we declare a struct containing the kernel arguments, accessible via device pointer. This differs from CUDA and HIP where kernel function arguments are declared as traditional C-style function parameters. This patch adapts the entrypoints declared in kernel.h so that they can be translated via a new `ccl_gpu_kernel_signature` macro into the required parameter struct + kernel entrypoint pairing for MSL.
MSL buffer attribution must be applied to function parameters or non-static class data members. To allow universal access to the integrator state, kernel data, and texture fetch adapters, we wrap all of the shared kernel code in a `MetalKernelContext` class. This is achieved by bracketing the appropriate kernel headers with "context_begin.h" and "context_end.h" on Metal. When calling deeper into the kernel code, we must reference the context class (e.g. `context.integrator_init_from_camera`). This extra prefixing is performed by a set of defines in "context_end.h". These will require explicit maintenance if entrypoints change. We invite discussion on more maintainable ways to enforce correctness.
Lambda expressions are not supported on MSL, so a new `ccl_gpu_kernel_lambda` macro generates an inline function object and optionally capturing any required state. This yields the same behaviour. This approach is applied to all parallel_... implementations which are templated by operation. The lambda expressions in the film_convert... kernels don't adapt cleanly to use function objects. However, these entrypoints can be macro-generated more concisely to avoid lambda expressions entirely, instead relying on constant folding to handle the pixel/channel conversions.
A separate implementation of `gpu_parallel_active_index_array` is provided for Metal to workaround some subtle differences in SIMD width, and also to encapsulate some required thread parameters which must be declared as explicit entrypoint function parameters.
Ref T92212
Reviewed By: brecht
Maniphest Tasks: T92212
Differential Revision: https://developer.blender.org/D13109
rBaa13c4b386b13111 added a check for the active object
in drawing code, but it missed adding a check for the active
base before trying to retrieve its object.
The test script did not work on windows
since it had some trouble importing the
api module on the blender side of things.
turning the file path to the module into
a raw string literal sidesteps the
backslash issue in the path.
Differential Revision: https://developer.blender.org/D13163
Reviewed by: brecht
Currently we have a fixed instance recursion limit. While we want to lift this
limitation at some point, that is out of scope for a bug fix. For now just print
a warning to make it easier to detect the issue.
Differential Revision: https://developer.blender.org/D13162
Because the menus list several gizmo visibility settings it makes grammatical sense that the panel name is plural.
This also matches the "Overlays" menu.
With instancing becoming more common with geometry nodes,
instances are less of a separate thing and more of an essential part
of evaluated data. Displaying them with a separate outline, while
helpful in some cases, is not worth the lack of visibility or confusion
about selected/active status. Information about the performance
of the scene due to instancing is always available with the statistics
like vertex count, etc.
The problems were compounded by the fact that the instancing
system is used to output geometry components that don't correspond
to the object's original type. So this patch also fixes that problem.
Fixes T92079, T81010
Ref T91310
Differential Revision: https://developer.blender.org/D13133
I noticed while rigging a character and editing actions that the Unlink Action operator had no undo step. Doesn't feel intentional, so this patch adds the necessary flags.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D12346
Decorators were only added for the first item of an array.
Decorators for all items of an array are added:
- if the layout is flagged `UI_ITEM_PROP_DECORATE` automatically in
`uiItemFullR` or
- calling `uiItemDecoratorR` (but only in certain situations, see below)
When calling `uiItemDecoratorR` with an index of 0, the following
happens:
- the index is passed to `uiItemDecoratorR_prop`
- that checks with `ui_item_rna_is_expand` if decorators should be added
to all items of an array
- the check fails (because it only permits RNA_NO_INDEX -- which is -1)
So two things we can do:
- remain using `uiItemDecoratorR` (that would require to pass an index
of RNA_NO_INDEX -- a bad level include -- or -1
- just use `uiLayoutSetPropDecorate` to flag the row properly
This patch does later.
Differential Revision: https://developer.blender.org/D13159
Currently the Distribute Points on Faces node does not propagate
non-point attributes correctly. That is because it first interpolates the
attributes to the point domain on the input mesh, and then propagates them.
Differential Revision: https://developer.blender.org/D13148
Since the recent change to context paths to use the arrow icon instead of the triangle (D13106),
the `SMALL_TRI_RIGHT_VEC`is no longer used. This patch removes the icon and all references.
- Replace `SMALL_TRI_RIGHT_VEC` with `RIGHTARROW` in Freestyle UI
- Remove references to `SMALL_TRI_RIGHT_VEC` and `ICON_SMALL_TRI_RIGHT_VEC`.
Fix for built-in add-ons has been done in rBAcc2f71bfe9b0/rBAa84028f8a89a.
This will be added to the list of breaking changes [[ https://wiki.blender.org/wiki/Reference/Release_Notes/3.0/Python_API#Breaking_Changes | in the Wiki ]].
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D13130
Expose a new function in `bpy.utils.flip_name(name, strip_number=False)
that allows flipping bone names, eg "Bone.L" -> "Bone.R".
Useful for add-ons to avoid re-implementing Blender's name flipping.
Ref D12322
Nishita sky is not available in Eevee, display a warning to make this clear inside the Sky texture node.
Differential Revision: https://developer.blender.org/D13161
Adds a pass before denoising that calculates the intensity of the image, which can be
passed into the OptiX denoiser for more optimal results for very dark or very bright images.
In addition this also fixes a crash that sometimes occurred on exit. The OptiX denoiser object
has to be destroyed before the OptiX device context object (since it references that). But in
C++ the destructor function of a class is called before its fields are destructed, so
"~OptiXDevice" was always called before "OptiXDevice::~Denoiser" and therefore
"optixDeviceContextDestroy" was called before "optixDenoiserDestroy", hence the crash.
Differential Revision: https://developer.blender.org/D13160
Adds a workaround for a driver bug in r495 that causes artifacts with OptiX denoising.
`optixDenoiserSetup` is not working properly there when called with a stream other than the
default stream, so use the default stream for now and force synchronization across the entire
context afterwards to ensure the other stream Cycles uses to enqueue the actual denoising
command cannot execute before the denoising setup has finished.
Maniphest Tasks: T92472
Differential Revision: https://developer.blender.org/D13158
This is a total refactor of how shadows are handled.
We use Virtual shadow maps with different Level of details to
ensure a somewhat evenly distributed precision.
The shadow test is a really crude shadow test that will be
improved in further commit.
There is a pool of 4096 Tilemaps that are distributed between
shadowed ligths. These tilemaps are 16x16 each and reference
shadow map pages that are allocated in an atlas. Pages are only
allocated if needed (i.e: visible for rendering an object).
Page management is done on GPU using compute shaders to reduce
CPU task.
On CPU only one draw pass per updated tilemaps is issued.
This reduces the memory requirement of shadowmapping large scenes
with many lights.
WITH_OPENCOLORIO and WITH_COMPOSITOR are required to run the tests at all,
since they affect many tests.
WITH_OPENSUBDIV WITH_FREESTYLE, WITH_OPENVDB, WITH_OPENIMAGEDENOISE and
WITH_MOD_FLUID selectively disable some tests.
Catalog simple names are supposed to fit into the DNA field `char
AssetMetaData::catalog_simple_name[64]`, and thus should be shortened
appropriately. This was already happening, but is now also covered by a
test.
No functional changes.
In armature edit mode, the Make/Clear Parent operators don't do anything
in various cases, but only one of these cases was previously indicated,
and it was indicated by hiding the option completely instead of graying
it out.
Clear Parent (Alt+P) problems fixed:
- "Clear Parent" option always showed up, even when none of the selected
bones had a parent.
- "Disconnect Bone" option always showed up, even when use_connected on
all selected bones was already false.
Make Parent (Ctrl+P) problems fixed:
- "Keep Offset" option didn't show up when all selected bones' parent
was already the active bone. This was correct, and this patch tries to
make all behaviours consistent with this.
- "Connected" option always showed up, even when all selected bones'
parent was already the active bone, and they all had use_connect set
to True.
With this patch all options show up all the time, but in cases where
they would do nothing, they will be grayed out.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D6100
Allow exporting of animated vertex colors to Alembic.
The changes are made to be in line with the way the UV Maps are written.
Each vertex color gets a OC4fGeomParam created and mapped into the
CDStreamConfig to avoid recreating the Param on each frame.
The time sample index is also stored in the config now and set onto the
UV and Vertex Color params each frame. Without this the exports would
get inconsistent timing results where animated UV maps and Vertex Colors
were not playing back at the original speed.
Reviewed By: sybren
Maniphest Tasks: T88074
Differential Revision: https://developer.blender.org/D11278
When adding certain customdata layers (namely UVs, vertex colors and
sculpt vertex colors), the user does not get notified the specific limit
has been hit (blender just silently does nothing).
Now inform the user [decided to not do this in poll() since it could get
messy once operators are extended to operate on all selected objects, so
left this as a visible error in execute() -- or from python].
Maniphest Tasks: T92318
Differential Revision: https://developer.blender.org/D13147
New tracking-camera presets d486ee2dbd used wrong code because I
copied them from the camera-presets. Now they set the right properties
again, the values stay the same as before.
Differential Revision: https://developer.blender.org/D13139
Expose transform tools when in weight paint mode with pose-mode enabled,
displaying transform tools in the toolbar, as is already done in
object & pose mode.
These are only shown when weight-paint + pose mode are active at once.
This allows single key-strokes to activate tools, needed when
tool-access is set as the default action for G/R/S key bindings.
Reviewed By: JulienKaspar
Ref D13028
If the blend file is saved from a script in another thread,
like the render thread for example, Blender will crash on the call that
redraws the UI.
Ref D13140
If the blend file is saved from a script in another thread,
like the render thread for example, Blender will crash on the call that
redraws the UI.
Ref D13140
When the asset view in the sidebar of the pose library would contain
more than a few handful poses, interaction and animation playback
performance would be impacted considerably. This was because our icon
drawing scales image buffers using a rather slow method on the CPU.
This commit changes it so the asset icons are scaled using the GPU.
Note that this is a temporary change. I'd like all icon code to use
GPU-side scaling, see D13144. But such a change is too risky to do in
the release branch at this point, so this fix is specifically for the
3.0 release.
As can be confirmed by checking generic code for this operation,
it is supposed to blend between the result of Breakdown based on
actual frame range, and the current pose. However for some reason
the quaternion specific code was blending between the current pose
and the current keyframed pose. This means that the operation does
nothing if invoked without modifying the pose first.
This rewrites the code to match the non-quaternion behavior.
Differential Revision: https://developer.blender.org/D13030
This patch adds shader compilation tests for the basic engine in `shaders_test.cc`
Addresses T92701
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D13066
Interpolation vertex data on loose edges was writing into already
allocated data.
Resolve this by skipping vertex end-points for custom-data interpolation
which has already been copied from the source mesh.
Reviewed By: sergey
Ref D13082
Currently, when creating a new node tree ID, its `typeinfo` is set to
`NodeTreeTypeUndefined`, but its `type` enum value is left to `0`,
aka `NTREE_SHADER`.
This patch adds a new `NTREE_UNDIFINED` value, and use it for
`NodeTreeTypeUndefined` types of node trees.
NOTE: While it is not clear whether that actually fixes issues currently,
quite a bit of code still relies on the value of `type`, so think it
makes sense to sanitize this.
NOTE: Would have been ideal to reserve `0` value to undefined type,
but at this point this is not possible anymore, so chose to use `-2` instead.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D13123
Previously, to get the declaration of a socket, one had to go
through `node->declaration`. Now this indirection is not necessary
anymore. This makes it easier to add more per-socket information
into the declaration and accessing it in various places.
Currently, this system is used by socket descriptions and node warnings
for unsupported geometry component types.
Reference struct members by name instead relying on their order.
This also simplifies moving back to named members when all compilers
we use support them.
Out of bounds read and potential out-of-bounds write when transforming
the 2D cursor for image editor and sequencer.
While this didn't cause user visible bugs in my tests,
it's error prone and should be avoided.
Use TransData2D for 2D cursors.
Out of bounds read and potential out-of-bounds write when transforming
the 2D cursor for image editor and sequencer.
While this didn't cause user visible bugs in my tests,
it's error prone and should be avoided.
Use TransData2D for 2D cursors.
Internal struct ObTfmBack had out of sync doc-strings
for members duplicated from Object.
Remove the doc-strings as there is this is just temporary storage.
Error introduced in rB69d6222481b4 and partially fixed in rB24310441ddc8.
When gizmo was turned on but the scene has more than one 3D viewport, one of them the snap cursor did not appear.
Cleanup and Simplification of blf_glyph.c
See D13095 for details.
Differential Revision: https://developer.blender.org/D13095
Reviewed by Campbell Barton
This commit renames mesh.c to mesh.cc and makes
it compile in C++. Can be useful in the future to be able
to use C++ functionality in existing and new functions.
Differential Revision: https://developer.blender.org/D13134
Remove the need to include the window manager & editor functions
in low level font rendering code.
- The default font size is now set when changed in the preferences.
- Flushing cache is set as a callback.
In the tools tab, the tool icon would be offset when it intersected
the bottom of the editor. With some screen resolutions, the icons on
the left side of the editor would also move when intersecting the
bottom of the editor. This happened because of the truncation in
the implicit conversion from float to int. Instead, use explicit
conversion functions.
Differential Revision: https://developer.blender.org/D11097
Changes:
* After hitting a shadow catcher, re-initialize the volume stack taking
into account shadow catcher ray visibility. This ensures that volume objects
are included in the stack only if they are shadow catchers.
* If there is a volume to be shaded in front of the shadow catcher, the split
is now performed in the shade_volume kernel after volume shading is done.
* Previously the background pass behind a shadow catcher was done as part of
the regular path, now it is done as part of the shadow catcher path.
For a shadow catcher path with volumes and visible background, operations are
done in this order now:
* intersect_closest
* shade_volume
* shadow catcher split
* intersect_volume_stack
* shade_background
* shade_surface
The world volume is currently assumed to be CG, that is it does not exist in
the footage. We may consider adding an option to control this, or change the
default. With a volume object this control is already possible.
This includes refactoring to centralize the logic for next kernel scheduling
in intersect_closest.h.
Differential Revision: https://developer.blender.org/D13093
Evaluated meshes from curves are presented to render engines as
separate instance objects now, just like evaluated meshes from other
object types like point clouds and volumes. For that reason, cycles
should not consider curve objects as geometry (previously it did,
meaning it retrieved a second mesh from the curve object as well
as the temporary evaluated mesh geometry).
Further, avoid adding a curve object's evaluated mesh as data_eval,
since that is special behavior for meshes that is arbitrary. Adding an
evaluated mesh there but not an evalauted pointcloud is arbitrary,
for example. Retrieve the evaluated mesh in from the geometry set
in BKE_object_get_evaluated_mesh now, to support that change.
This gets us closer to a place where all of an object's evaluated data
is stored in geometry_set_eval, and we just have helper functions
to access specific geometry components.
Differential Revision: https://developer.blender.org/D13118
Followup to e65230f0c0.
Pablo and I decided it's fine to reset themes again when saved with the
recent 3.1 builds.
This needed to be done a bit careful, since a normal version patch
resetting the theme would've reset the theme for anybody opening
preferences of a 3.0 build (even the final release build) in a 3.1
build. So make sure the theme is at least from a 3.1 build (but not
newer then this commit of course).
A reference makes clear that NULL is not an expected value. So it's the
prefered way of passing a `const` input parameter (at least if it may
not be cheap to copy).
Evaluated meshes from curves are presented to render engines as
separate instance objects now, just like evaluated meshes from other
object types like point clouds and volumes. For that reason, cycles
should not consider curve objects as geometry (previously it did,
meaning it retrieved a second mesh from the curve object as well
as the temporary evaluated mesh geometry).
Further, avoid adding a curve object's evaluated mesh as data_eval,
since that is special behavior for meshes that is arbitrary. Adding an
evaluated mesh there but not an evalauted pointcloud is arbitrary,
for example. Retrieve the evaluated mesh in from the geometry set
in BKE_object_get_evaluated_mesh now, to support that change.
This gets us closer to a place where all of an object's evaluated data
is stored in geometry_set_eval, and we just have helper functions
to access specific geometry components.
Differential Revision: https://developer.blender.org/D13118
During animation playback, data-blocks are reallocated, so storing
pointers to the resulting data is not okay. Instead, the data should
be retrieved from the context. This works when the applied search
item is the "dummy" item added for non-matches. However, it still
crashes for every other item, because the memory is owned by the
modifier value log, which has been freed by the time the exec function
runs.
The next part of the solution is to allow uiSearchItems
to own memory for the search items.
The point domain attributes (stored on splines) are sorted so they
have a consistent order on all splines after the join. However, spline
domain attributes were included in the new order, which didn't work
because the length of the attribute lists didn't match. The simple fix
is to only include point domain attributes in the new order vector.
Denoising make use of more memory to store and reproject the result of
previous frame to reduce noise. This only works for viewport.
There is a final bilateral filter for cleaning up noise even more.
Screen space Raytracing is supported by alpha blended surfaces.
However only opaque surfaces will be visible to the rays. This means
Alpha blended surfaces cannot reflect or refract themselves.
Denoising is not possible on alpha blended surfaces. Many samples
are needed for noise free results.
Since the cost of tracing can be very high, raytracing will only be
enabled on demand, on a per-material basis.
This simply reuse the reflection raytracing pipeline but with another
ray distribution. Only direct lighting, distant lighting and emissive
light are visible to diffuse rays.
Subsurface effect is not visible but transmittance effect is visible
to diffuse rays.
Indirect diffuse light is processed by the SSS filter.
The new pipeline is now cleaner and allows for deferred refraction.
The refractions are more accurate but are not denoised for now. More
research needs to be done in this area.
There is no feedback buffer for now, so reflections of metallic surfaces
will appear black.
The same restriction on refractive materials still holds true. They will
not appear in screen space tracing of other non refractive surfaces.
However, refractive surfaces (non-blended) can now reflect themselves
and the other surfaces with screen space reflections.
Half res tracing is not implemented back yet.
The current `ICON_SMALL_TRI_RIGHT_VEC` uses dark hard-coded colors ([`0.2`, `0.2`, `0.2`])
which makes it impossible to theme and hard to see in dark contexts.
Use `ICON_RIGHTARROW` to match the Outliner's breadcrumbs. This icon uses `TH_TEXT` so it's visible as long as the rest of the text is.
##### Master
(Properties editor background made red on purpose to be able to see the triangle icon)
{F11713038, size=full}
#### This patch
{F11713039, size=full}
Reviewed By: #user_interface, Severin, HooglyBoogly
Maniphest Tasks: T92771
Differential Revision: https://developer.blender.org/D13106
In some cases when geometry is created in Geometry Nodes
the viewport stats will show 0 because runtime data is not filled.
This patch sets the runtime data on instances.
Differential Revision: https://developer.blender.org/D12738
For single point splines that weren't at the origin, the results were
incorrect. Now take into account the tilt, radius, etc. just like the
general case.
The VSE grid theme setting is currently used for two things:
* Indicate time intervals (vertical lines)
* As separator between channels (horizontal lines)
This adds visual noise because for the time interval to be visible, the
grid color needs to be bright, resulting in a rectangle-grid backdrop.
Recently, the VSE got a theme setting to customize alternate-row background color.
This should be sufficient to tell the channels apart without the need for a line in between.
Additionally, this patch makes the VSE background use the theme setting as-is,
without hard-coded darkening, to ease the tweaking of themes. This aligns the style
of the VSE backdrop with the rest of Blender (Outliner rows, File Browser, Spreadsheet,
Info and animation editors).
Related reports: T92581
Related task: T92792
#### Before
{F11680317, size=full}
#### After
{F11694981, size=full}
Reviewed By: #user_interface, Severin
Maniphest Tasks: T92581
Differential Revision: https://developer.blender.org/D13072
Adds a `wmOperatorCallContext` typedef for the existing `WM_OP_XXX`
operator context enum. This adds type safety, allows the compiler to
produce better warnings and helps understanding what a variable is for.
Differential Revision: https://developer.blender.org/D13113
Reviewed by: Campbell Barton
This comment is from the block at the end of the versioning functions,
where we have an unversioned block to collect versioning code that
doesn't require immediate version bumping. The comment was probably just
copied over with the code when bumping the version eventually.
Issue introduced in {7e66616b7e15} where the shader was replaced with a
2d image shader. This patch reverts several commits that removed the 3d
image shader.
Image engine is used to draw an image into a space. The current
structure wasn't clear and couldn't be easilly extended. This refactor
spliced the image draw engine into 3 main components.
- Space accessors: contains an interface to communicate with space data
(Image editor, UV Editor, Node Editor) in a common way. This reduced
the branching in the code base.
- DrawingMode: contains an interface to the used tactic to draw an image
inside the space framebuffer. Currently only one mode is implemented;
in the future there could be a separate drawing mode for huge images.
- ImageEngine: the core that connects the draw manager with the space
data and drawing mode.
A recent change exposed this long-standing race. Simply protect the
MEM_CacheLimiter with its lock now. Additionally, guard against
unmanaging an already destroyed cache handle.
Ref T92740, T92838
This reverts commit 9bd97e62ad.
This caused T92818.
Event handling relies on checking for NULL window to detect file load in
enough different areas of the code that this isn't a practical solution.
Revert this change in favor of an alternative approach.
Future operators can use the same code,
so it is moved up to disassociate it from decimate
No functional changes
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D12489
Ref: D12489
This patch renames:
* tDecimateGraphOp to tGraphSliderOp
* dgo to gso (to match with the struct rename)
* decimate_reset_bezts to reset_bezts to indicate it can be used by other functions
No functional changes
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D12490
Ref: D12490
The kernel file names are search for based on the arch name, for example
gfx1010. However HIP's gcnArchName can contain options such as xnack- in
the name. For example gfx1010:sramecc-:xnack-.
This revision tokenizes the info from gcnArchName and just uses the first
token for choosing the Kernel file to use. Kernels are portable across those
features in the arch name.
Also remove the bit for recompiling ptx as clearly that is not relevant.
Differential Revision: https://developer.blender.org/D13117
This new option allows to combine all layers in the active one. Also the merge down option has been improved.
Reviewed By: mendio, pablo vazquez (UI)
Differential Revision: https://developer.blender.org/D13054
* Name generated 'append' collection, instead of getting a generic
meaningless name.
* Do not check if a collections's objects are already instantiated, when
we already know that we want to instantiate that collection.
The issue was that some geometries were not synced again even when
they changed. This commit adds a map that keeps track of the geometries
that need to be updated when an object has changed.
Differential Revision: https://developer.blender.org/D13020
A group node could reference an undefined group when the group
was linked and its source file was not found on load. The field
inferencing code did not handle that case before.
With this change, the file provided in T92799 loads successfully.
Cloth modifier had a unique, weird and weak way of copying its
pointcache, now make it use `BKE_ptcache_copy_list` like done for e.g.
particles or softbody data.
We need to store the continuation probability used to make the termination
decision in intersect_closest, instead of recomputing it in shade_surface.
Because otherwise a shade_volume in between can change the throughput and
change the probability.
A repeat of the problem I caused last time I edited the startup file.
Never do it with a lite build! Also align the toolbar widths in all
editors to the smallest size they snap to.
Drop-boxes should act on the context determined through the exact cursor
location. There should be no need to override that, basically by the
nature of how drop-boxes work.
So Campbell and I agreed on removing this.
If we wanted to support it, we'd have to restore the operator context
when drawing drop-boxes, see
https://developer.blender.org/T92501#1247581.
Simply removing the check for `UI_STATE_TEXT_INPUT` makes it inherit
the "List Item" User Interface theme settings. This patch changes the
default theme to match the colors of text input fields.
#### Master
{F11680556, size=full}
#### This patch
{F11680557, size=full}
All the included commmunity themes seem to work well (only Deep Grey might
need more contrast but that's a different patch).
Related reports: T92720
Reviewed By: #user_interface, Severin
Maniphest Tasks: T92720
Differential Revision: https://developer.blender.org/D13073
According to https://docs.python.org/3/library/os.html#os.rename,
`os.rename` has os-specific behavior, and will fail in case you attempt
to rename to an existing file on windows.
So using `os.replace` instead, which should be os-agnostic.
NOTE: Fact that temp test directory is not cleared after tests are
sucessfully ran does not sound great...
This solves the issue in a more general that can also be used to solve
similar issues for other nodes in the future. Nodes can specify their
"main" socket in their declaration so that we don't have to rely on
heuristics.
Differential Revision: https://developer.blender.org/D13108
Many modifiers and other places use `CustomData_copy_data` to copy data
between different meshes. This function assumes that assumes that the
source and destination `CustomData` objects are "compatible" in some way.
Usually modifiers use `CustomData_copy` to create a compatible new
`CustomData` on the new mesh. The issue was that the optimization I added
for anonymous attributes broke this compatibility. It avoided copying some
attributes when they are no longer used.
This lead to attributes being copied incorrectly.
D13083 contains ideas for how this could be fixed more generally.
For now I just removed the optimization.
Differential Revision: https://developer.blender.org/D13083
Issue was that the context used for dropbox handling and polling didn't
match the one used for drawing the dropbox and generating the tooltip
text (which would determine the material slot under the cursor,
requiring context). The mismatch would happen with overlapping regions.
Actually, this patch includes two fixes, each fixing the crash itself:
* Store the context from handling & polling and restore it for drawing.
* Correct the hovered region lookup for drawing to account for overlayed
regions.
Note that to properly set up context for drawing, we should also account
for the operator context, which isn't done here, see
https://developer.blender.org/T92501#1247581.
The global theme state didn't get updated or unset properly when drawing
overlays. Now paint cursors use the theme settings of the space they are
in, while global overlays use the global fallback, which is the main 3D
View region.
Size, position and scale of the "two-line" widget (the one to scale a
node horizontally) was not taking interface scale into account. In the
case of the report, it could happen it draws behind an output socket.
before (at 2.0 interface scale)
{F11698493}
after (at 2.0 interface scale)
{F11698501}
Maniphest Tasks: T92791
Differential Revision: https://developer.blender.org/D13088
When reading pixels for virtual passes like diffuse, that sum diffuse direct
and indirect passes, we do not need them to exist with an offset in the render
buffer.
Adds a length output to the curve parameter node which returns the
length of a spline at each point, or the length of the curve at
each spline depending on the domain.
Differential Revision: https://developer.blender.org/D12882
This shows a geometry's volume grids in the spreadsheet.
Three columns are displayed:
- Name: The text name of each grid
- Data type: Float, Vector, etc.
- Class: Fog volume, Level Set, or unkown
In the future, values of the voxels themselves could be displayed,
but that is a much more complex problem, with important performance
implications, etc.
Differential Revision: https://developer.blender.org/D13049
Building on the work in rBef45399f3be0, this commits adds
tooltips to the inputs for the default primitives nodes.
Differential Revision: https://developer.blender.org/D12640
By default, when syncing materials slots between object and its obdata,
the amount of slots in obdata is the reference.
Missing linked obdata is replaced by an empty placeholder that has no
material. In that specific case, if we have a valid object ID, we want
to update the (placeholder) obdata's material count from the object one,
and not the other way around.
Add a boolean input to the resample curve node that indicates which
splines should be resampled and which should be unchanged.
Differential Revision: https://developer.blender.org/D13064
The `ContainerValue` template can obtain the type of the contained value
via the given `Container` type, simply using `Container::value_type`.
Use this as the default way to determine the value type which simplifies
using the template. If necessary the value type can be passed explicitly
still.
Even never-shown RNA properties should have at least a description, as
this is used by API doc generation scripts.
NOTE: this is more of an opportunistic set of changes than a proper
complete fix of that loack of documentation.
* Fix systematic skipping of labels when they are the same as
the identifier (Some cases are valid, like `RGB` or `HSV` e.g.).
* Add instead heuristics checks to skip non-UI properties (non-capitalized,
or same name as identifier and Operator properties, mainly).
* Skip `bl_icon` and `icon` properties.
* Properly search for properties in all parent classes (some cases with
e.g. `Panel` would break due to intermediary utils classes, leading to
those internal UI properties not being skipped as expected).
Related to T43295.
Operations such as erasing with occlusion and drawing on the surface
require reading the depth buffer.
However, this is being done with minimal efficiency.
Currently, to read the depth corresponding to each point of the new stroke,
a ReadPixel is called to send a message to the GPU and read the depth of
the corresponding pixel in the VRAM.
The communication between GPU and CPU is known to be a slow operation so
it is good to be avoided.
Therefore, save the entire depth buffer in a cache to be read directly
from the RAM.
(Also the `ED_view3d_autodist_depth` and `ED_view3d_autodist_depth_seg` have
been removed since they are no longer used).
Reviewed By: antoniov, fclem
Differential Revision: https://developer.blender.org/D10894
The channel names were often indistingushable in animation editors.
Now include the node _name_ (unfortunately, getting the _label_ could
result in bad performance in some circustances -- see previous version
of D13085).
Similar to what rB77744b581d08 did for some VSE strip properties.
ref. T91917
Maniphest Tasks: T91917
Differential Revision: https://developer.blender.org/D13085
There was a bunch of special handling to support dropping data-blocks onto
string or search-menu buttons, to change the value of these. This refactor
makes that case use the normal drop-box design, where an operator is executed
on drop that gets input properties set by the drop-box. This should also make
it easier to add support for dragging assets into these buttons.
In addition this fixes an issue: Two tooltips were shown when dragging assets
over text buttons. None should be shown, because this isn't supported.
The version patch for 0cf9794c7e was checking and setting a data name
using the macros for translation. These would access the current
preferences which can mismatch the ones currently being version patched.
See discussion in 0cf9794c7e for details.
Don't handle translation in this version patch, which is more of a
"nice-to-have" version patch, no functionality depends on it.
Display a "disabled hint" (text explaining why something isn't possible)
when dragging a material over the 3D View, while being in edit mode or
so (anything that isn't object mode).
The geometry node evaluator now has access to the entire socket path
from the node that produces a value to the node that uses it. This allows
the evaluator to make decisions about at which points in the path the
value should be converted. Multiple conversions may be necessary under
some circumstances with nested node groups.
Differential Revision: https://developer.blender.org/D13034
This patch removes the need to lock the thread just to get to some
generic (not glyph-specific) font metrics.
See D12976 for more details.
Differential Revision: https://developer.blender.org/D12976
Reviewed by Campbell Barton
This properly checks the order of point domain attributes on each
spline, and avoids the map, which makes the code easier to understand.
The assert is also added to realizing instances and the join node.
Differential Revision: https://developer.blender.org/D13071
Currently the curve to mesh node relies on the order of attributes being
the same on every spline. This is a worthwhile assumption, because it
will allow removing the attribute name storage duplication on every
spline in the future.
However, the join geometry node broke this order, since it just created
new attributes without any regard to the order. To fix this, I added a
"reorder" step after all the merged attributes have been created, the
types have been joined, etc. It should be possible to change this code
so that the attributes are added with the right order in the first
place, but I would like to do that after refactoring spline attribute
storage, and not for 3.0.
Differential Revision: https://developer.blender.org/D13074
We run into float precision issues here, clamp the number of octaves to
one less, which has little to no visual difference. This was empirically
determined to work up to 16 before, but with additional inputs like
roughness only 15 appears to work.
Also adds misisng clamp for the geometry nodes implementation.
Not sure why this bug was only discovered by such an elaborate steps
and why it took so long to be discovered. The root of the issue is
that in the 956c539e59 the typical flow of tag+flush+evaluate was
violated and tagging for visibility change happened after flush.
Since rBb67fe05d4bea2d3c9efbd127e9d9dc3a897e89e6 collections
have a geometry component that depends on all the geometries
inside the collection. Contrary to what I originally thought
`ID_RECALC_COPY_ON_WRITE` does not trigger a collection geometry
update. This makes sense because a collection may change in ways
that do not require a geometry update.
Instead, we have to trigger the geometry update manually now by
passing `ID_RECALC_GEOMETRY` when appropriate.
Currently, colored links overlay only supports standard sockets defined
by Blender. Some add-ons like Animation Nodes defines custom sockets for
everything and hence doesn't get colored sockets.
This patch uses the draw color from the socket type info to draw links
in order to support custom sockets.
Differential Revision: https://developer.blender.org/D13044
Reviewed By: Hans Goudey
The geometry node port of voronoi_smooth_f1 function has a
division by zero when smoothness is set to zero.
Using a safe_divide within the function causes issues
and was noted in the original patch D12725.
Solution in this case is to clamp zero smoothness to FLT_EPSILON.
Reviewed By: JacquesLucke
Maniphest Tasks: T92736
Differential Revision: https://developer.blender.org/D13069
Need to make sure images needed for hair shaders are loaded
before running the shader.
The naming is a bit misleading, but this is an internal API
and we can change it easily. Submitting minimal patch needed
to fix logic in the code to make it safer to review for 3.0.
Differential Revision: https://developer.blender.org/D13067
Calling it with a None argument, or no arguments, or with a property
that is missing UI data for some reason would fail. There is no
particular reason why ensuring those things don't happen is helpful,
so just add null checks for safety.
Differential Revision: https://developer.blender.org/D13024
Some compositor tests (e.g. `compositor_color_test`) broke
because of rB0c3b215e7d5456878b155d13440864f49ad1f230.
The issue was a heap-use-after-free bug caused by a missing
call to `MEM_CacheLimiter_unmanage`.
Operators such as setting the object mode failed after calling
WM_OT_open_mainfile from Python.
Keep the window after loading a file outside the main event loop.
Previously, `ImageTile->ok` and `ImageUser->ok` were used to indicate
whether an image failed to load. There were three possible values
which (probably) had the following meanings:
* `0`: There was an error while loading the image. Don't try to load again.
* `1`: Default value. Try to load the image.
* `2`: The image was loaded successfully.
This image-wide flag did not make sense unfortunately, because loading
may work for some frames of an image sequence but not for others.
Remember than an image data block can also contain a movie.
The purpose of the `->ok` flag was to serve as an optimization to avoid
trying to load a file over and over again when there is an error (e.g. the
file does not exist or is invalid). To get the optimization back, the patch
is changing `MovieCache` so that it can also cache failed load attempts.
As a consequence, `ibuf` is allowed to be `NULL` in a few more places.
I added the appropriate null checks.
This also solves issues when image sequences are used with the
Image Texture node in Geometry nodes (also see D12827).
Differential Revision: https://developer.blender.org/D12957
Caused by own {rB5aa3167e48b2}.
Related commit: {rBebaa3fcedd23}.
For stereo renders, `BKE_image_is_multilayer` is true, however we seem
to get to down to `space_image_gpu_texture_get` [where this is called]
from `IMAGE_cache_init` with a NULL Image->RenderResult.
So what then happens is that `BKE_image_multilayer_index` is called and
even though it has an appropriate codepath for stereo, it earlies out
and does not set multi_index correctly.
Still a bit puzzled why RenderResult is NULL for a render, but since
other places also check for a valid RenderResult before going down the
_multilayer_ route (and doing _multiview_ instead), now do the same
thing, BKE_image_multiview_index is now called in these cases (and seems
to behave correctly, checked with layers and passes and all seems to
display correctly, either in stereo or choosing individual eyes).
thx @jbakker & @brecht for double-checking.
Maniphest Tasks: T92608
Differential Revision: https://developer.blender.org/D13063
Even though volumes can only have one material, it is still necessary to
allow assigning a material to a prodecurally created volume. This commit
adds volume support and a warning for when a non-constant selection is
used with a volume.
Fixes T92485
Differential Revision: https://developer.blender.org/D13037
rBbe3e09ecec5372f switched the order for vertices referenced by the
start cap's corners, but it failed to account for the offset necessary
for edge indices, since the order changed.
CyclesX introduced two new input sockets for the Principled BSDF node in
rB08031197250a. This change is now handled in the versioning code so that
Animation data targeting those sockets are now updated.
Files created with the last Blender release (2.93) or earlier are now
correctly versioned. Files created with 3.0 alpha/beta may need to be
manually updated.
When node input sockets are animated, they target the socket by index.
As a result, animation data needs to be updated whenever new sockets are
added (except when they're added at the end of the list). The code for
this is now extracted into its own versioning function, so that it can
be used for other versioning steps as well.
No functional changes.
Check SpaceSpreadsheet's runtime is not null when trying to duplicate
the data when doing an area split.
See D13047 for further details.
Differential Revision: https://developer.blender.org/D13047
Reviewed by Jacques Lucke
Check SpaceSpreadsheet's runtime is not null when trying to duplicate
the data when doing an area split.
See D13047 for further details.
Differential Revision: https://developer.blender.org/D13047
Reviewed by Jacques Lucke
A typical issue with popup handling: We have to respect the menu-region
and give it priority over the regular region for handling. In this case
there isn't a regular region in context even.
rB43bc494892c3 switched `BKE_libblock_relink_to_newid` to use new ID
remapping and libquery code.
However, that new code does protect by default against remapping an
objects's data pointer when that object is in Edit mode, since this is
not a behavior that generic BKE code can handle (due to required editing
data for most obdata types when in edit mode).
So specific code that does create new IDs and need remapping in Edit
mode has to pass specific exception flags to remaping code.
This commit adds those remapping flags to `BKE_libblock_relink_to_newid`
and add said exception flag to the remapping call from
`ED_object_add_duplicate` when the object is in edit mode.
In theory we should never allow remapping of Objects' obdata ID pointer
when the object is in Edit mode. But there are some cases were this is
needed, so adding yet another exception option to remapping flags.
Preliminary change to fix T92629.
This reverts commit 7f1fe10595.
Fixes: T92549
Root cause hasn't been discovered but assert failed at
keyframes_keylist.cc#793. Like some data is shared between threads.
When using "Mark as Asset" the second time on an object (after having
done a "Mark as Asset" and then a "Clear Asset"), the old preview would
be re-used, even if the object was changed meanwhile. This is a bit of a
papercut, so always force previews to be re-rendered on "Mark as Asset".
Allows to avoid a global lock being held while reading files from disk,
solving performance issues when Cycles needs to read a lot of packed
images.
Simple test file F11597666
Differential Revision: https://developer.blender.org/D13032
The name and tooltip were talking about file-lists, which exposes the
fact that the Asset Browser uses the File Browser code in the UI, which
we shouldn't do. This can confuse users.
Instead have a dedicated operator for the Asset Browser with a proper
name and tooltip.
This patch adds support for selecting pointclouds.
Since pointclouds were not properly drawn to the selection buffer (as diagonsed by output from `glReadPixels` and Renderdoc), they were not able to be selectable by depth picking or occlusion queries. In `basic_engine`, objects were rendered with a shader which draws to a depth buffer but only assumes a single position vertex attribute. Pointclouds, though, require at least another vertex attribute `pos_inst` which provides the instance offsets. Thus, this patch adds another shader variant for pointclouds which supports these two attributes and renders the points appropriately.
{F11652666}
Addresses T92415
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D13059
This patch adds support for selecting pointclouds.
Since pointclouds were not properly drawn to the selection buffer (as diagonsed by output from `glReadPixels` and Renderdoc), they were not able to be selectable by depth picking or occlusion queries. In `basic_engine`, objects were rendered with a shader which draws to a depth buffer but only assumes a single position vertex attribute. Pointclouds, though, require at least another vertex attribute `pos_inst` which provides the instance offsets. Thus, this patch adds another shader variant for pointclouds which supports these two attributes and renders the points appropriately.
{F11652666}
Addresses T92415
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D13059
This patch adds support for selecting pointclouds.
Since pointclouds were not properly drawn to the selection buffer (as diagonsed by output from `glReadPixels` and Renderdoc), they were not able to be selectable by depth picking or occlusion queries. In `basic_engine`, objects were rendered with a shader which draws to a depth buffer but only assumes a single position vertex attribute. Pointclouds, though, require at least another vertex attribute `pos_inst` which provides the instance offsets. Thus, this patch adds another shader variant for pointclouds which supports these two attributes and renders the points appropriately.
{F11652666}
Addresses T92415
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D13059
Debug symbols were disabled for Clang at some point due to link issues.
This is no longer the case for any reasonably modern version of Clang.
So this patch removes the check in question.
Differential Revision: https://developer.blender.org/D13045
Reviewed By: brecht
Instead of printing debug flags listing various CPU and GPU settings that
may or may not be used, print when we are using them. This include CPU
kernel types, OptiX debugging and CUDA and HIP adaptive compilation. BVH
type was already printed.
Snapping to an axis aligned view with a 45 degree rotation would
set the view orthographic without setting it back to perspective
when orbiting the view as you would expect with auto-perspective.
Now orthographic is only set for views with rotation of 0, 90, 180, -90.
Notes:
- Partially reverts logic from cebd025e02
at the time RegionView3D.view_axis_roll had not been added,
so only setting the orthographic with one particular rotation
was a bigger limitation than it is now.
- Auto-perspective could be supported when snapping the viewport to
diagonal angles, however that's a larger project.
Accessing the default directory in the file selector
would crash if HOME was undefined.
Add BKE_appdir_folder_default_or_root which never returns NULL.
The code to store an original bezt array previously lived in
`graphkeys_decimate_invoke`.
Since future graph slider operators will need this function as well,
it has been extracted.
No functional changes.
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D12487
Ref: D12487
An int flag is used to filter animation channels for
operators to work on. The flag was duplicated multiple times.
This patch removes the duplication by creating a constant
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D12486
Ref: D12486
Change the way the pose slider gets its color so it is consistent
between editors
Previously the highlight color would be different between
the 3D viewport and the graph editor.
Reviewed by: Sybren A. Stüvel, Pablo Vazquez
Differential Revision: https://developer.blender.org/D11878
Ref: D11878
Instead of creating a separate grid first and then merging the points
to volume grid, use the recently added `BKE_volume_grid_add_vdb`
helper function for this purpose.
When browsing to open a font file, open File Browser in Thumbnail View
and sorting by name, instead of using the last-used states.
See D13040 for more details.
Differential Revision: https://developer.blender.org/D13040
Reviewed by Julian Eisel
Initial defaults for userdef->fontdir for Mac and Linux.
See D12802 for more details.
Differential Revision: https://developer.blender.org/D12802
Reviewed by Campbell Barton
This node doesn't only support point clouds, it supports any geometry
component type with points, so meshes, curves, and point clouds.
We could explicitly list them to add a warning for volumes, but
that wouldn't really have any practical benefit, and isn't done
elsewhere.
The name and tooltip were talking about file-lists, which exposes the
fact that the Asset Browser uses the File Browser code in the UI, which
we shouldn't do. This can confuse users.
Instead have a dedicated operator for the Asset Browser with a proper
name and tooltip.
As part of the refactor to the node declaration builders, we had hoped
to add a regular expression specifically for these socket names, but
recent discussions have revealed that using the translation marker
macros is the preferred solution.
If the names and descriptions were exposed to RNA, these would not
be necessary. However, that may be quite complicated, since sockets
are all instances of the same RNA types.
Differential Revision: https://developer.blender.org/D13033
The asset catalog filtering data needs to be cleared when with the other
asset library data of the file list. This is done when changing between
asset and file browser (and in other cases).
Those were used in a very few places to detect whether iteration should
be stopped or not, but one can use `BKE_lib_query_foreachid_iter_stop`
now for that.
Also fix early break handling in embedded IDs processing.
Fix T90922: Fix return policy inconsistency in `scene_foreach_id`.
In case `library_foreach_ID_link` would return early in recursive
process, it would not properly free its utils data.
Also add proper iteration break in case some sub-calls requested it.
Finally, make this function return a boolean to know whether iteration
should be stopped or not (will be used in future commit to fix this
handling in embedded IDs case).
Part of T90922: Fix return policy inconsistency in `scene_foreach_id`.
The new `BKE_LIB_FOREACHID_PROCESS_FUNCTION_CALL` execute the given
statement and then check status of `LibraryForeachIDData` data, and
return in case stop of iteration is requested.
This is very similar to the other `BKE_LIB_FOREACHID_PROCESS_` existing
macros, and allows us to properly break iteration when a sub-function
has requested it.
Part of T90922: Fix return policy inconsistency in `scene_foreach_id`.
Add a function to check if iteration over ID usages should stop (using
internal `IDWALK_STOP` status flag).
Use it in `BKE_LIB_FOREACHID_PROCESS_` macros, and in
`window_manager_foreach_id` to handle properly the active workspace case
(previous code could skip the call to `BKE_workspace_active_set` in case
iteration over ID usages was stopped by callback on that specific ID
usage).
Part of T90922: Fix return policy inconsistency in `scene_foreach_id`.
Calling `remove_unused_references` inside the `modify_geometry_sets` loop
was known to be not entirely reliable before. Now I just moved it out of
the loop which fixes the bug.
Looks like OSX changed the default format of its locale, which is not
valid anymore for gettext/boost::locale.
Solution based on investigations and patch by Kieun Mun (@kieuns), with
some further tweaks by Ankit Meel (@ankitm), many thanks.
Also add an exception catcher on `std::runtime_error` in
`bl_locale_set()`, since in OSX catching the ancestor `std::exception`
does not work with `boost::locale::conv::conversion_error` and the like
for some reasons.
Reviewed By: #platform_macos, brecht
Maniphest Tasks: T88877
Differential Revision: https://developer.blender.org/D13019
This fixes one (of possibly multiple) root issues. The collection passed into
the Collection Info node must not contain the current object, because that
would result in a dependency cycle and recursive instancing.
This is a better and more general fix for T92511 and T92508 than
the ones that I committed before.
Previously, we tagged caches dirty when first accessing attributes.
This led to incorrect caches when under some circumstances. Now
cache invalidation is part of `OutputAttribute.save()`.
A nice side benefit of this change is that it may make things more
efficient in some cases, because we don't invalidate caches when
they don't have to be invalidated.
Differential Revision: https://developer.blender.org/D13009
In this case, the uniform index sampling loop would fail to assign any
data to the samples, so fill the rest with the largest value possible,
corresponding to the end of the spline. Animation Nodes has the same
fix for this case.
This patch makes `widget_nodesocket` base the size of the drawn
socket icon on the rectangle that’s passed in to allow it to scale
with the rest of the interface.
Differential Revision: https://developer.blender.org/D11734
When doing a non portable build of blender, the executable
blender-thumbnailer would be installed in two locations:
/usr/bin/
/usr/
While cleaning up, also make the blender thumbnailer dll optional on
windows to bring the logic in line with what it is on linux and mac.
Reviewed By: Campbell Barton, Ray molenkamp
Differential Revision: http://developer.blender.org/D13014
When use Invert option, the weight must be inverted not omitted. This change invert the value if the point had assigned weight to get the right result.
Remapping code could call collection resync code while processing
remapping, which is a good way to crash by accessing no-more-valid
pointers.
Similar issue as with liboverrides resync, fixed the same way by
preventing any collection resync until whole remapping has been done.
This was probably not an issue in practice in current code, since this
is only used by append code currently, which should not affect
layers/collections in current scene yet.
`CTX_data_selected_objects()` returns a `ListBase` of
`CollectionPointerLink`, not `PointerRNA`. This caused an alignment
issue, resulting in `owner_id == NULL` reported in T92507. Correcting
the pointer type fixed this.
In the end, the same pointer is used as before this commit, but the way
it is obtained is actually correct.
When a new key is added to the context, it also needs to be added to the
`sphinx_doc_gen.py` file for generating the Python API documentation.
When this isn't done, the script would raise a generic `KeyError`. Now
it explains what needs to be updated to solve the problem.
No functional changes to Blender.
Before this, the search button was quite small really, not much text would fit
into it. Increase the size a bit, but not too much to still make the layout
work in smaller area sizes.
Before this, the search button was quite small really, not much text would fit
into it. Increase the size a bit, but not too much to still make the layout
work in smaller area sizes.
There was a bunch of special handling to support dropping data-blocks onto
string or search-menu buttons, to change the value of these. This refactor
makes that case use the normal drop-box design, where an operator is executed
on drop that gets input properties set by the drop-box. This should also make
it easier to add support for dragging assets into these buttons.
In addition this fixes an issue: Two tooltips were shown when dragging assets
over text buttons. None should be shown, because this isn't supported.
{F11548100, size=full}
To celebrate the beginning of a new series, it feels like the right time to
give the theme a fresh look while improving on what already works.
The aim of this refresh is to keep a familiar look but with polishing touches
here and there. Like new paint on the walls of your well known house.
The theme for Blender 2.8 was well received but presented a few flaws.
* Transparency on menus and tooltips reduce readability
* Mismatch on certain colors, especially outlines of connected widgets
* Active/open menus highlight was not prominent enough
* Header background mismatch in some editors
At the same time we can make use of new features in 3.0:
* Make panels look like panels again (like in v2.3!)
* Make use of roundness in more widgets
* Since nodes are no longer hard-coded to be transparent, tweak opacity and saturation
* Tweak colors for the new dot grid
This update does not include:
* Meshes in edit mode to match greenish object-data color. This needs tweaks in the code to improve contrast.
* A copy of the Blender 2.8x legacy theme. This could be added to the community themes (shouldn't cost much maintenance, I hope)
There will be certainly small tweaks to do here and there, I've been working using this theme
for months but there can be areas that are missing update. The overall style is presented here.
This commit bumps the file subversion.
Reviewed By: #user_interface, Severin
Differential Revision: https://developer.blender.org/D13008
Adding a catalog should also activate it, like we do it for adding other
data in Blender. The tree-view code will make sure the newly added item
will not have collapsed parents.
This reverts commit 487faed6d0.
I changed my mind on how to implement this feature. Adding a catalog
should also activate it, like we do it for adding other data in Blender.
The activation will automatically make it visible then. See the
following commit.
When pressing the '+' icon to add a new child catalog, or when adding it
through the context menu, the new catalog should be visible. So the
this change makes sure the parent is uncollapsed if needed.
The current UI for the Scramble Distance patch is grayed out
depending on different settings that are enabled. However it
didn't make much sense to me so I have updated when the UI is
grayed out to hopefully make more sense to the end user.
Differential Revision: https://developer.blender.org/D12963
This is meant to add something to the sub-panel when it is empty
so it looks more purposeful, but also add a hint that might be helpful
when figuring out how to output a named attribute.
Differential Revision: https://developer.blender.org/D12715
The text is just too long, it doesn't fit in the node width,
and the tooltips display the property names well enough,
since they aren't used as often as other settings.
Also display the text in lite builds too, there is no reason not to.
That makes the node more useful by default.
One use case is to delete some points after the Set ID node, then instance
with some randomness. Now when deleting different points, the
randomness will remain stable.
Subdivision surface: Both geometry sockets renamed to "Mesh"
Points to Volume: Use "Points" and "Volume" names
Distribute Points on Faces: Use "Mesh" input name
These are meant to provide a hint to users which type each
node is meant to use.
- Only cycle items when the cursor hasn't moved.
This matches object-mode behavior, making it possible to tweak-drag
the current selection without first cycling to the next sequence strip.
Successive clicks will still cycle sequence strips.
- For center selection, use a penalty for the active strip.
- Use a temporary selection list to avoid moving the sequence
strips out of the scene during selection
(changing their order when added back).
Replace local static mouse coordinate storage with a single function.
also resolve inconsistencies.
- Edit-mesh selection used equality check (ignoring `U.move_threshold`).
- Motion to clear tooltips checked the value without scaling by the DPI.
Also prevent the unlikely case of the previous motion check matching
a different area by resetting the value when the active region changes.
Uses the additions to the UI tree-view API from the previous commit to
enable drag & drop of asset catalogs. The catalogs will be moved in the
tree including children.
A remaining issue is that a catalog with children will always be
collapsed when dropping. I need to find a way to fix that in the
tree-view API.
There are a few improvements I can think of for the tree-item drag &
drop support, but time for these is too short. These can be done as
normal cleanups at some point.
Adds the needed bits to the UI tree-view API to support dragging
tree-view items. This isn't used yet, but will be in the following
commit for asset catalogs.
There will probably be some further tweaks to the design at some point,
for now this should work well enough for our use-cases.
Mantaflow could steal tasks from dependency graph, which under
certain conditions causes a recursive lock involving GIL.
Isolate threading done in mantaflow when it is interfaced form
the dependency graph.
Isolation done from the modifier, since the deeper calls are
branching out quite quickly.
Differential Revision: https://developer.blender.org/D13011
Adds scrambling distance to the PMJ sampler. This is based
on the work by Mathieu Menuet in D12318 who created the original
implementation for the Sobol sampler.
Reviewed By: brecht
Maniphest Tasks: T92181
Differential Revision: https://developer.blender.org/D12854
saturate is depricated in favour of __saturatef this replaces saturate
with __saturatef on CUDA by createing a saturatef function which replaces
all instances of saturate and are hooked up to the correct function on all
platforms.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D13010
The label was placed right at the left border of the row highlight,
which looked weird. So add some padding to tree-row labels without icon
or collapse chevron, which makes it look more polished. As additional
benefit, it alignes the labels better with icons of other rows on the
same tree level. And the padding makes it more clear that a child is
indeed a child, not just a sibling without icon.
Unlike translating existing nodes [which disables cursor wrapping and
enables edge-panning instead since rBSa1cc7042a74], adding new nodes
would still show the old behavior of cursor wrapping.
This has been disabled for the case when the node whould be added
outside (due to menus overlapping other editors).
Now enable edge-panning for adding new nodes as well and make sure
this only starts once the mouse has returned into the inside rect once.
Maniphest Tasks: T92427
Differential Revision: https://developer.blender.org/D13005
This seems wrong and was especially noticeable since transform snapping
does account for it (which was reported in T92494).
Now divide the `DotGridLevelInfo` `step_factor` by the default of 20 for
`U.widget_unit` and scale it later by the actual interface scale.
note: when zooming, this will still always snap to the smallest dot
level (not sure, with a bit more work it could be possible to only snap
to the lowest visible level after fading?)
Maniphest Tasks: T92494
Differential Revision: https://developer.blender.org/D13002
Properties Editor
Similar to rBf9308a585ecd, use `psys_get_current` if we cant get the
active psys from context (which is only defined for the Properties
Editor). Other solution would be to define a "particle_system" context
member in other editors, but for now, stick with the simplest solution.
thx @mano-wii for additional input
Maniphest Tasks: T92402
Differential Revision: https://developer.blender.org/D13000
Lattice wires are drawn as part of "Extras". Unlike the other types
details (Cameras, Lights, Lightprobes and Speakers), Lattices actually
have boundingboxes defined, so hide the lattice wires if only the
boundingbox is requested.
Maniphest Tasks: T88443
Differential Revision: https://developer.blender.org/D11343
Avoid using underscore prefix since these typically mean the variable
shouldn't be accessed directly (it may be accessed from a macro,
or memory on the stack which is assigned to a pointer).
In this case a more meaningful name can be used for the argument
that was shadowed.
SVN seems to die randomly *a lot* during
large updates for some users, and I'm no
closer to finding out why that keeps happening.
"The internet" seems to imply some AV vendors
may be at fault here but nothing conclusive.
The solution however is repeatedly running
`svn cleanup`and `svn update` in the library
folder to repair the corruption and finish the
update.
This change adds a small convenience helper
to automate the repair.
This is done inside the make.bat code rather
than the shared python based update code, since
python lives in the library folder and may
or may not exist when this corruption occurs.
The paddings and margins were more than needed, this reduces them a bit. That
way space is used more efficiently, the small differences add up so that more
items fit into a row.
The File Browser should not be affected.
Before/after comparisons:
{F11529986} {F11529988}
{F11529987} {F11529989}
This reverts commit 03013d19d1.
This commit broke the windows build pretty badly and I don't
feel confident landing the fix for this without review.
Will post a possible fix in D12969 and we'll take it from there.
These nodes allow accessing and changing the stable/random ID used
for motion blur with instances and stable randomness.
Since rB40c3b8836b7a, the stable ID is a built-in attribute, so to be
consistent and allow changing it in the node tree like other built-in
attributes, it has get and set nodes.
Knife angle measurements were mis-aligned if a cut point was in space.
Specifically, the arc drawing would not match with the cut line.
Fixed by removing a correction for kcd->prev.cage.
This correction was originally added for panning with measurements to work.
In hindsight it is not needed and only introduces issues like this.
We already show a message when showing an asset library whose path can't be
found on disk. The red text was making it look like some fatal error happened.
And the message could be a bit more useful generally.
So this removes the red color of the text, (arguably) improves the text and
adds a button as shortcut to open the Preferences with the asset library
settings.
Differential Revision: https://developer.blender.org/D12894
Renames the operator from "Show Preferences" to "Open Preferences...". "Open"
is more clear than "Show" (since they could be shown in-place). "..." is
usually used in Blender to indicate that a new Window or popup will be opened.
Note that vanilla Blender doesn't actually show this name anywhere, so this
change shouldn't be visible. That may change, see D12894.
Feedback was that "Default" is a bit of a weird name, so switching it to "User
Library". Added versioning code which won't be entirely bullet proof (e.g. will
also rename libraries named "Default" by the user), but it doesn't have to be.
Addresses T90298.
The call to `attribute_try_get_for_output` does some cache invalidation
internally. Under some circumstances the call to `position_evaluator.evaluate()`
recomputed the caches (e.g. when the Normal node was used, the evaluated
handle positions cache on curves were updated). After the positions have
been updated in the Set Position node, the cache was not invalidated again.,
leading to incorrect rendering.
The proper solution will be to do the cache invalidation in `OutputAttribute.save()`
again. That is a bit more involved though. For now just reorder the code a bit
to do the cache invalidation after the field has been computed.
There is a follow up task: T92509.
The location of a linked object isn't editable, or at least it will be reset
when reloading the file. So the drag & drop shouldn't even pretend like this
would work, so disable the snapping of the object and the bounding-box to show
the snapped object location while dragging.
When the Asset Browser import type was set to "Link", after dragging in an
object asset the object wouldn't actually appear in the viewport. Do the same
depsgraph tagging (and TODO comment) as the `OBJECT_OT_add_named` operator,
which does similar things.
This patch changes how nodes look visually, in an attempt to fix a number of issues:
* The header background is currently drawn using a theme color fully opaque, this limits the colors we can use because the node name/label is drawn on top.
* Hard-coded transparency makes nodes hard to read. The node backdrop already has alpha so if the user wants it they can set it. This patch uses alpha from the theme.
* Better muted status indicator, instead of simply making everything transparent and the wires inside red, draw a red outline around the node, darken the header and backdrop.
* On muted nodes, display wires behind the backdrop to not interfere with text/widgets inside the node.
Nodes:
* Darken header to improve readability of node label.
* Draw a line under the header
* Thicker outline.
* Do not hard-code transparency on nodes, use the theme's node backdrop alpha component.
* Use angle icon instead of triangle (to be consistent with the [[ https://developer.blender.org/D12814 | changes ]] to panels)
Style adjustment to sockets drawing:
* Do not hard-code the socket outline color to black, use `TH_WIRE` instead
* Do not use `TH_TEXT_HI` for selected sockets, use `TH_ACTIVE` (active node outline)
* Do not draw sockets background transparent on muted nodes.
* Thicker outline to help contrast and readability
{F11496707, size=full}
Reviewed By: #user_interface, HooglyBoogly
Differential Revision: https://developer.blender.org/D12884
Previously, every node had to create warnings for unsupported input
geometry manually. Now this is automated. Nodes just have to specify
the geometry types they support in the node declaration.
Differential Revision: https://developer.blender.org/D12899
Instance IDs serve no purpose for rendering when they aren't stable from
one frame to the next, and if the index is used in the end anyway, there
is no point in storing a vector of IDs and copying it around.
This commit exposes the `id` attribute on the instances component,
makes it optional-- only generated by default with the distribute points
on faces node.
Since the string to curves node only added the index as each instance's
ID, I removed it. This means that it would be necessary to add the ID
data manually if the initial index actually helps (when deleting only
certain characters, for example).
Differential Revision: https://developer.blender.org/D12980
Now that object assets are no longer considered experimental, the Assets
submenu can always be shown (regardless of the Extended Asset Browser
experimental feature).
The two blocking issues for object assets are addressed, see T92111 and T90198.
So now, objects can be marked as assets and be used in the Asset Browser.
`ED_fileselect_activate_by_id()` activates an asset (i.e. marks it as
the active asset in the asset browser). To avoid an "active but not
selected" state, it also selects it.
Before this commit, the function would also deselect all other assets,
but that's considered doing too much. If deselection is required, the
`ED_fileselect_deselect_all()` function can be called.
Manifest Task: T92152
In the 3D Viewport, add an "Assets" submenu to the Objects menu, for the
same operators as available in the outliner: Mark as Asset, Clear Asset,
Clear Asset (Set Fake User).
Since object assets are still considered experimental, the menu is only
shown when the Extended Asset Browser experimental feature is enabled.
There's now a message displayed in red next to the cursor explaining that only
assets from the current file can be moved between catalogs.
The previous commit prepared this.
A tree-view item's drop controller can now return a message for the user
explaining why dropping isn't possible with the dropped data. This is then
displayed in red text next to the cursor.
This isn't actually used yet, the follow up commit will do that.
Make it possible to run `ASSET_OT_mark` and `ASSET_OT_clear` operators from
the 3D Viewport. There is no menu entry, just compatibility with pressing
F3 and executing the operators from the operator search.
Refactor `view3d_context()` to use early `return`s instead of a bundle of
`if`/`else if`/`else`, some of which had `return`s and some not.
No functional changes.
`view3d_context()` would return `-1` ("found but not available") when
fetching the context dir. This is incorrect; it should return 1 ("ok").
This is a semantic change in preparation of further cleanup of the code.
This adds generic attribute rendering support for meshes for Eevee and
Workbench. Each attribute is stored inside of the `MeshBufferList` as a
separate VBO, with a maximum of `GPU_MAX_ATTR` VBOs for consistency with
the GPU shader compilation code.
Since `DRW_MeshCDMask` is not general enough, attribute requests are
stored in new `DRW_AttributeRequest` structures inside of a convenient
`DRW_MeshAttributes` structure. The latter is used in a similar manner
as `DRW_MeshCDMask`, with the `MeshBatchCache` keeping track of needed,
used, and used-over-time attributes. Again, `GPU_MAX_ATTR` is used in
`DRW_MeshAttributes` to prevent too many attributes being used.
To ensure thread-safety when updating the used attributes list, a mutex
is added to the Mesh runtime. This mutex will also be used in the future
for other things when other part of the rendre pre-processing are multi-threaded.
`GPU_BATCH_VBO_MAX_LEN` was increased to 16 in order to accommodate for
this design.
Since `CD_PROP_COLOR` are a valid attribute type, sculpt vertex colors
are now handled using this system to avoid to complicate things. In the
future regular vertex colors will also use this. From this change, bit
operations for DRW_MeshCDMask are now using uint32_t (to match the
representation now used by the compiler).
Due to the difference in behavior for implicit type conversion for scalar types
between OpenGL and what users expect (a scalar `s` is converted to
`vec4(s, 0, 0, 1)` by OpenGL, vs. `vec4(s, s, s, 1)` in Blender's various node graphs) ,
all scalar types are using a float3 internally for now, which increases memory usage.
This will be resolved during or after the EEVEE rewrite as properly handling
this involves much deeper changes.
Ref T85075
Reviewed By: fclem
Maniphest Tasks: T85075
Differential Revision: https://developer.blender.org/D12969
In future use cases, a volume can contain many grids that represent the
density information. In this case, it's better if the volume to mesh node
creates a mesh based on all of the grids in the volume.
This is also a benefit to share-ability, since one doesn't have to
specify the grid name in the node. Instead, in the future we can have
a way to split particular grids into separate volumes, if only one
grid should be considered.
The code changes are relatively simple:
- Move the old volume to mesh node to the legacy folder.
- Run the volume to mesh node on all instance geometry, like elsewhere.
- Make the blenkernel's volume to mesh API a bit more specific.
Differential Revision: https://developer.blender.org/D12997
When dragging an object in non-object mode into a 3D View, there will now be
red text explaining that this is only possible in object mode.
The previous commit enabled this.
* Allow operators to show a "disabled hint" in red text explaining why dropping
at the current location and in current context doesn't work. Should greatly
help users to understand what's the problem.
* Show a "stop" cursor when dropping isn't possible, like it's common on OSes.
Differential Revision: https://developer.blender.org/D10358
This option allows the edge to end right at the border
instead of extending beyond.
Useful when having multiple camera setup where you
want the border to be clean.
Also moved overscan option down inside "Composition" sub panel
so it makes more sense.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12126
This patch upgrades node editor breadcrumbs to have slightly more
visual weight, to including the base path of object/modifier/world,
etc, have more visually pleasing spacing, and contain icons.
In the code, a generic "context path" is added to interface code.
The idea is that this could be used to draw other breadcrumbs in areas
like the property editor or the spreadsheet, and features could be added
to all of those areas at the same time.
Ideally we would be able to control the color of the breadcrumbs with a
specific theme color, but since they are drawn with the regular layout
system, that is not easily possible.
Thanks to @fabian_schempp for the original patch.
Differential Revision: https://developer.blender.org/D10413
Allows line art camera to be different from scene active camera,
useful when baking multiple shots in different angle as
well as for motion graphics effect.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12047
Allows the user to turn off in_front option for grease pencil object
and offset strokes towards camera to allow depth interaction of the
rest of the scene.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12046
Cycles:Distance Scrambling for Cycles Sobol Sampler
This option implements micro jittering an is based on the INRIA
research paper [[ https://hal.inria.fr/hal-01325702/document | on micro jittering ]]
and work by Lukas Stockner for implementing the scrambling distance.
It works by controlling the correlation between pixels by either using
a user supplied value or an adaptive algorithm to limit the maximum
deviation of the sample values between pixels.
This is a follow up of https://developer.blender.org/D12316
The PMJ version can be found here: https://developer.blender.org/D12511
Reviewed By: leesonw
Differential Revision: https://developer.blender.org/D12318
Node links that are connected to selected nodes are highlighted
using the Wire Select theme color. Now it is possible to change the
transparency of this color to allow the actual link color to be visible
through the highlight (or to turn of the highlight entirely).
Differential Revision: https://developer.blender.org/D12973
Remove prefix of filenames that is the same as the folder name. This used
to help when #includes were using individual files, but now they are always
relative to the cycles root directory and so the prefixes are redundant.
For patches and branches, git merge and rebase should be able to detect the
renames and move over code to the right file.
* Split render/ into scene/ and session/. The scene/ folder now contains the
scene and its nodes. The session/ folder contains the render session and
associated data structures like drivers and render buffers.
* Move top level kernel headers into new folders kernel/camera/, kernel/film/,
kernel/light/, kernel/sample/, kernel/util/
* Move integrator related kernel headers into kernel/integrator/
* Move OSL shaders from kernel/shaders/ to kernel/osl/shaders/
For patches and branches, git merge and rebase should be able to detect the
renames and move over code to the right file.
Currently, both inactive and active tabs are using the `Region Text` theme property.
This patch makes it so active tabs use `Region Text Highlight`.
Since this check is done in other places already but was simply missing in this case, I believe this was just an oversight and not a design decision.
Top is master, bottom is this patch:
{F11520838, size=full}
This allows this kind of tab highlight, not possible before since all tabs would have white text.
{F11520873, size=full}
Reviewed By: #user_interface, Severin
Differential Revision: https://developer.blender.org/D13003
Add a Fast GI Method, either Replace for the existing behavior, or Add
to add ambient occlusion like the old world settings.
This replaces the old Ambient Occlusion settings in the world properties.
This is still useful in some cases even if not used by OpenImageDenoise. In
the future this may be replaced with a more generic system to control render
passes and filtering, but for now this just does what it did before.
Adds an abstraction layer to switch between serialization formats.
Currently only supports JSON. The abstraction layer supports
`String`, `Int`, `Array`, `Null`, `Boolean`, `Float` and `Object`. This
feature is only CPP complaint.
To write from a stream, the structure can be built by creating a value
(any subclass of `blender::io::serialize::Value` can do, and pass it to
the `serialize` method of a `blender::io::serialize::Formatter`. The
formatter is abstract and there is one implementation for JSON
(`JsonFormatter`).
To read from a stream use the `deserialize` method of the formatter.
{D12693} uses this abstraction layer to read/write asset indexes.
Reviewed By: Severin, sybren
Maniphest Tasks: T91430
Differential Revision: https://developer.blender.org/D12544
Previously, the field on every socket was logged for later use. This had
two main negative consequences:
* Increased memory usage, because the fields may contain a lot of data
under some circumstances (e.g. a Ray Cast field contains the target geometry).
* Decreased performance, because anonymous attributes could not be
removed from geometry automatically, because there were still fields that
referenced them.
Now most fields are not logged anymore. Only those that are viewed by a
spreadsheet and constant fields. The required inputs of a field are still
logged in string form to keep socket inspection working.
Avoid blocking the UI when searching for animation channels with Ctrl+F.
Instead of showing a single text input in a blocking popup, Ctrl+F now
just focuses the search box above the channel list. It feels nicer to
use and has the niceties that come from using that textbox, like
searching per keystroke, compared to the old pop-up method.
As the behaviour of the operator has changed considerably, this also
changes the operator name from `anim.channels_find` to
`anim.channels_select_filter` and updates the keymaps.
Reviewed By: ChrisLend, sybren
Differential Revision: https://developer.blender.org/D12146
Our CMake setup refuses to run from the source directory (i.e. Blender does
not support in-source builds). Instead, it shows instructions on how to
clean up after an accidental `cmake` invocation. These instructions missed
one directory that should also be removed (`CMakeFiles`), so that's been
added to the message now.
No functional changes to Blender or the build.
The viewer node has been expanded to have a field input next to the
geometry input. When both are connected (by ctrl+shift clicking on a node)
the spreadsheet will show the evaluated field on the geometry.
The operator to link to the viewer has become a bit smarter. It automatically
detects if it should link to the geometry or field input. In the future some more
smartness could be added, such as automatically relinking the "right" geometry
when viewing a field.
Internally, there are two major changes:
* Refactor of what happens when ctrl+shift clicking on a node to link to
a viewer. The behavior of the geometry nodes viewer is a bit more complex
than that of the compositor viewers. The behavior in compositing nodes
should not have changed. Any change should be reported as a bug (and then
we can decide if it's worse than before or if it needs fixing).
* Evaluation, display and caching of fields in the spreadsheet editor.
Differential Revision: https://developer.blender.org/D12938
This adjusts some calculations and visibility flags for XR viewports in
order to account for a possible scale factor in the XR view matrix.
This scale factor can be introduced via the XR session settings base
scale, which allows a viewer to begin their session at a specific
reference scale, or the XR session state navigation scale, which allows
a viewer to adjust their scale relative to the reference scale during
the session.
Reviewed by Severin as part of D11501, but requested to be committed
separately.
Adds navigation transforms (pose, scale) to the XR session state that
will be applied to the viewer/controller poses. By manipulating these
values, a viewer can move through the VR viewport without the need to
physically walk through it.
Add-ons can access these transforms via Python
(XrSessionState.navigation_location/rotation/scale) to use with custom
operators.
Also adds 3 new VR navigation operators that will be exposed to users
as default actions in the VR Scene Inspection add-on. While all three
of these operators have custom properties that can greatly influence
their behaviors, for now these properties will not be accessible by
users from the UI. However, other add-ons can still set these custom
properties if they desire.
1). Raycast-based teleport
Moves the user to a location pointed at on a mesh object. The result
can optionally be constrained to specific axes, for example to achieve
"elevation snapping" behavior by constraining to the Z-axis. In
addition, one can specify an interpolation factor and offset.
Credit to KISKA for the elevation snapping concept.
2). "Grab" navigation
Moves the user through the viewport by pressing inputs on one or two
held controllers and applying deltas to the navigation matrix based on
the displacement of these controllers. When inputs on both controllers
are pressed at the same time (bimanual interaction), the user can scale
themselves relative to the scene based on the distance between the
controllers.
Also supports locks for location, rotation, and scale.
3). Fly navigation
Navigates the viewport by pressing a button and moving/turning relative to
navigation space or the VR viewer or controller. Via the operator's
properties, one can select from a variety of these modes as well as
specify the min/max speed and whether to lock elevation.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D11501
This patch makes the background grid of the node editor a grid of dots
instead of lines. This makes the background look a bit more subtle and
reduces visual complexity. The dots are meant to provide a reference
when panning and zooming. Based on the design of @pablovazquez, and
a patch originally authored by @fabian_schempp.
The "Grid Levels" controls how many levels of dots are drawn. As the
editor zooms in, the higher levels of dots fade in, making them closer
together visually. The zoom factor at which each grid starts and ends
fading in is controllable in the code, and could be tweaked further
in the future. The new default value is 7, out of a range from 0 to 9.
Differential Revision: https://developer.blender.org/D10345
The also moves all the image operators into one menu.
The goal here is to expose the operators in the UI so they
work with the operator search and to make the UI consistent.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D12808
This patch improves performance by only assigning
or calculating data for connected sockets.
It is recommended that artists use the lowest dimensions setting
for noise based textures. E.g. Use 2D instead of 3D where possible.
Using a scoped timer and single thread on 256,000 points.
Smooth F1 3D : Debug build
Timer 'Optimised' took 9.39991 s
Timer 'Normal' took 16.1531 s
This optimisation is only for GN and not shaders.
Differential Revision: https://developer.blender.org/D12985
Also use consistent UI names for properties that are similar between
that node and the points to volume node (which happen to be shorter,
allowing the node to be narrower).
The search bar in the asset browser now also matches on asset tags.
- Matching is done on entire tags, so searching for "redder" will not
show assets tagged with "red".
- All assets are shown that have at least one matching tag. So searching
for "red green" will show all assets with either "red" or "green" tags
(or both, of course).
- Searching is case-insensitive.
- Only assets from the active catalog are shown; if all assets should be
searched through, users can select the "All" catalog.
Manifest Task: T82679
This patch makes the layout of the custom property panel more coherent
with the rest of the property editor interface, makes it less busy,
allows more space for the buttons for the actual properties, and
simplifies editing values of unsupported property types or long arrays.
- Remove the box around each property.
- Use an non-embossed X icon for deleting.
- Use an "edit" icon instead of the text for the meta-data edit operator.
The "gear" icon used for editing isn't ideal here.
- Increase the max array length for drawing the values directly to 8.
- Add an "Edit Property Value" operator for dictionaries or longer arrays.
- Replace the "Library Override" text with an icon.
- Use a proper split factor, the same as the rest of the UI.
Differential Revision: https://developer.blender.org/D12805
The drag and drop feature of objects in 3D View has been modified to include:
- Snap the object being dragged.
- Visual feedback through a box and the placement tool grid.
Maniphest Tasks: T90198
Differential Revision: https://developer.blender.org/D12912
No functional changes.
This commit adds 3 callbacks for `wmDropBox` which allow custom drawing
without affecting the internal dropbox API.
Differential Revision: https://developer.blender.org/D12948
Perform a few cleanups:
- Add documentation to explain what returned bools mean.
- Early returns so that flow is clearer and some checks on `is_filtered`
are no longer necessary.
- Split up `is_filtered_file` and `is_filtered_id_file`, so that they can
reuse common code, and such that the different filter checks they
perform can be separated from each other.
The latter is done not only to reduce code duplication, but also as
preparation to fix the asset browser filtering. For that, it helps when
the "filter by file name" and "filter by file type" parts are separate.
No functional changes.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D12991
The NLA editor is in need of a design overhaul, hopefully for 3.1 or 3.2.
This should be a project on itself, however, the worst offender currently is the use of
gradients on strips. Something that can be fixed easily.
{F11390293, size=full, loop, autoplay}
A simple replace of `UI_draw_roundbox_shade_x` for `UI_draw_roundbox_4fv` brings strips
in line with how other areas are drawn.
This patch also:
* Remove embossed lines around active action channel.
* Highlight the strip while being moved.
This patch does not include any theme changes. This will be tackled separately.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D12968
This adds an option to fill the ends of the generated mesh for
each spline combination with an N-gon. The resulting mesh is
manifold, so it can be used for operations like Boolean.
Differential Revision: https://developer.blender.org/D12982
While c7d94a7827 exposed this bug,
this was caused by text widths being calculated without taking the zoom
level into account since drawing at a smaller size is often wider than
the width of the larger text scaled by the zoom.
Issue is that the Instance on Points node currently expects that all
instance references are used (see `remove_unused_references`).
This should be fixed at some point, but for now make sure that
the String to Curves node does not output unused references.
Add calls to `BKE_callback_global_init()` and `BKE_callback_global_finalize()`
to ensure unit tests mimick Blender (and don't trip the assertions added
in rBbeea601e7253).
No functional changes to Blender.
Object types like empties, cameras or lamps will just end up as empty preview
images. We can think about ways to visualize them still, but meanwhile, don't
create such an empty preview.
Differential Revision: https://developer.blender.org/D10334
Reviewed by: Bastien Montagne, Sybren Stüvel
While c7d94a7827 exposed this bug,
this was caused by a discrepancy in padding where labels would
have additional padding when drawing without emboss.
The padding made widget drawing behave as if the text took up more
room causing it to be clipped.
Now labels are considered the same width with/without emboss.
This adds a new image texture node for geometry nodes. It does not
reuse the same node that is used in shading, because we want to be
able to expose the image and frame as sockets.
There is a known update issue when a movie or image sequence is
used. That will be fixed separately (also see D12957).
Currently, the image socket is just a pointer to an Image ID data block.
This can contain single images but also movies and image sequences.
In the future, the definition of an image socket can be expanded to
include images that are generated from scratch in the node tree.
For more details read the discussion in D12827.
Some of the code is a direct port from cycles and should be cleaned
up a bit in the future. For example `image_cubic_texture_lookup`.
For still images, the frame input is ignored. Otherwise, the frame
has to be in a valid range for the node to work. In the future we
may add e.g. automatic looping functionality.
Differential Revision: https://developer.blender.org/D12827
Oversight in {rBb0741e1dcbc5}.
This was guarded by an assert in `get_target_element`, but it can be
valid to have these assigned to a shortcut (and then perform the action
without an active outliner element).
Now remove the assert and let the operator polls check if we really have
a target element.
note: this basically makes `get_target_element` obsolete, could call
`outliner_find_element_with_flag` instead in all cases.
Maniphest Tasks: T91411
Differential Revision: https://developer.blender.org/D12495
Asset Catalog Paths should only contain forward slashes as separators, but
now the UI is more resilient to people using blackslashes instead.
Manifest Task: T90553
Put related lines in a block of their own, such that each block doesn't
have access to the variables of the previous blocks.
This makes it easier to correctly copy-paste some tests, as the compiler
forces you to update the code afterwards.
Panning in camera view makes the border to be modified, which was causing
the Cycles display to believe the rendered result is unusable.
The solution is to draw the render result at the display parameters it was
updated for. This allows to avoid flickering during panning, zooming, and
camera FOV changes. The suboptimal aspect of this is that it has some jelly
effect, although it is on the same level as jelly effect of object outline
so it is not terrible.
Differential Revision: https://developer.blender.org/D12970
Add static boolean to track whether the callbacks system has been
initialised. This makes it possible to make the `BKE_callback_remove()`
function more noisy in case of programming errors, and avoids accessing
`funcstore->alloc` when `funcstore` was potentially already freed.
Thanks @campbellbarton for pointing this out.
This replaces the boolean Offset input in the Set Position node with
a vector input. This makes the node easier to use. Using a "Position"
input as an "Offset" sounds wrong anyway.
The Position and Offset inputs are evaluated at the same time.
The versioning only works correctly when the Offset input was not connected
to something else before.
Differential Revision: https://developer.blender.org/D12983
Introduces a dropping-controller API for the tree-view items,
`AbstractTreeViewItemDropController`. This reduces responsibilities of the main
tree-view item classes, which are already getting quite big. As I expect even
more functionality to be needed for it (e.g. drag support), it's better to
start introducing such controller types already.
The idea is to allow having a lot of non-intersecting volumes without
allocating volume stack to its full size.
With the F11285472 file the memory usage goes from 1400 MiB to 1000
on the RTX6000 card.
The fix makes it so the integrator work memory is allocated after
scene update which has downside of possible less efficient update
when some textures don't fit GPU memory, but has an advantage of
making proper decision and having a clear and consistent internal API.
Fixes memory part of T92014.
Differential Revision: https://developer.blender.org/D12966
The approach didn't turn out to be that useful after all as there
are unavoidable dependencies of data from the device. For example,
to know whether object intersects volume or not it is required to
run displacement kernels.
The way of splitting host and device updates caused state where
some data is not yet available, causing confusion and leaving
code to be error-prone.
Fixes a crash when blend thumbnails set to Camera View when there is
no camera, which resulted in use of a null region.
See D12748 for more details.
Differential Revision: https://developer.blender.org/D12748
Reviewed by Campbell Barton
This commit fixes T90633, it changes the behavior of the `Frame All`
operation when the user is tabbed into a metastrip: instead of using
the scene timeline's range, `Frame All` uses the current metastrip's
range.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D12974
When using downscaled preview size with proxies, transform effect
doesn't compensate for fact, that pixels are effectively larger. There
was compensation for scene render size already.
Use same compensation method as text effect uses for font size.
This was caused by strips with single frame input like single image
strip or color strip. their length is always 1, and so content length
was calculated to end after first frame.
There was code handling this case, but it was also checking for
`anim_endofs` and `endstill` values. Anim offset values have no effect
on these strips and still frame value was used incorrectly. So these
chacks can be removed completely.
This was caused by snap to hold offset feature, which calculates strip
content boundary, but it can be outside of strip boundary.
Clamp content start and end values so they are always inside of strip.
This commit makes sure that each attribute name is only added once
when logging geometry values for attribute search.
The `attribute_foreach` function for a single geometry component
deduplicated names, but a much more common situation is to have
more than one component in the instances of a geometry set.
Differential Revision: https://developer.blender.org/D12959
The leak happened when two things were true:
* Inside of a node group a socket is linked to a Group Input that has
a different type.
* The corresponding input on the parent Group node is not linked.
The conversion happened correctly, but the original value wasn't
destructed.
Previously, the computed value passed into the data socket could depend
on the actual field a bit. However, given that the link is marked as invalid
in the ui, the user should not depend on this behavior.
Using a default value is consistent with other cases when there are
invalid links.
This is to automate the generation of reuse sample tables and maybe more
in the future. This is not designed to make compilation way longer than
expected.
This value is defined in the UI module, but happens to be used
in string_search.cc too. Note that these references need to be kept in
sync. Use escaped utf-8 sequence since the literal can be avoided.
Also replace BLI_str_utf8_as_unicode calls with constant assignments
as these values are known there is no need to decode a utf-8 sequence.
This patch renames the node "String Substring" to "Slice String"
to conform to the "verb first" naming convention.
Default length is also changed to 10 to make it easier for users
to understand what the node does.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D12931
* Open File Browser when pressing "Add Asset Library". This just makes sense,
since users have to select a directory for the asset library anyway.
* Move '+' icon back to the right side of the box. Then it is right under the
'x' icons for each indivdual library, which seems like the more natural
place.
* Correct tooltip for the "Add Asset Library" operator.
* Mark empty asset library name or paths field in red, to make clear that these
need to be set.
This node takes a geometry set with instances as input and outputs
points located on the origins of the top level of instances in the
geometry set (not nested instances). It also has position and radius
inputs to allow overriding the default, and a selection input to only
generate points for some instances.
The use case for this node is a method to use geometry proximity on
instance origins, but in a more generic way that is flexible and useful
in other situations.
Differential Revision: https://developer.blender.org/D12893
Previously, when the start input was greater than the end input,
the spline was resized to a single point. That is correct, but the
single point wasn't placed properly along the spline. Now, it is
placed according to the "Start" value, as if the trim started, but
couldn't continue because the "End" value was smaller.
This behavior is handled with a separate code path to keep each
simpler and avoid special cases. Any cleanup to reduce duplication
should focus on making each code path shorter separately rather
than merging them.
Also included are some changes to `lookup_control_point_position`
to support cyclic splines, though this single-point method is still
disabled on cyclic splines for consistency.
Fixes several notable mistakes and missing information
regarding the API documentation (*.rst).
This will allow API stub generators like bpystubgen or
fake-bpy-module to produce more accurate result.
Differential Revision: https://developer.blender.org/D12639
Because `segment_is_vector` didn't handle the combined cyclic and
single control point case, it returned false, that the "segment" should
have the resolution evaluated point count. To avoid checking the size in
every call, add an assert for the size and check it elsewhere.
Adds a filter popup to the header that allows specifiying which data-block
types to show. The menu automatically reflects all supported ID types, so it
shows a checkbox for materials, worlds and actions currently by default, and
all ID types with the "Extended Asset Browser" experimental feature enabled.
The checkboxes integrate better with the surrounding layout and are not that
attention grabbing. To my knowledge the only reason not to use checkboxes was
so the icons could be displayed. But this does it just like the Outliner filter
settings: Show the icon before the checkbox.
Also widen the popover a bit to fit longer labels (didn't fit before this patch
even).
This was reported for FCurve modifiers, but was also true (in theory) for
other instanced panels (regular modifiers, spreadsheet filters, ...),
these would not show pinning for other reasons (no caterories).
So in the case of the Graph Editor the follwing happens:
`graph_buttons_register` only registers `GRAPH_PT_modifiers`, the panel
itself has no header (PANEL_TYPE_NO_HEADER), further panels for
individual modifiers are added dynamically in `graph_panel_modifiers`.
So when pinning a particular modifier, we would pin e.g. `GRAPH_PT_noise`
(not `GRAPH_PT_modifiers`).
ED_region_panels_layout_ex would only collect panels known to
`graph_buttons_register` (so is not aware of the specific panels of
modifiers). So while I think it should be possible to pin
`GRAPH_PT_modifiers` on top of an individual modifier's panel this would
result in all modifiers being shown in other categories [which would also
be weird]. Panel header layout was also not correct (drawing the pin
icon over the modifier delete icon).
So to resolve this, just dont use pinning for these type of panels.
part of T92293.
Maniphest Tasks: T92293
Differential Revision: https://developer.blender.org/D12965
Show assets that have an unknown catalog ID assigned in the "Unassigned"
catalog.
Another catalog named "Orphans" was considered as well, but that would
clash with the usual handling of Blender (discarding orphan data on
save) and thus that idea was discarded.
Manifest Task: T91949
Keep track of unsaved asset catalog changes, in a more granular way than
just one boolean per asset library. Individual catalogs can now be
marked with a flag `has_unsaved_changes`. This is taken into account
when reloading data from the catalog definition file (CDF):
- New catalog in CDF: gets loaded
- Already-known catalog in CDF:
- local unsaved changes: on-disk catalog is ignored
- otherwise: on-disk catalog replaces in-memory one
- Already-known catalog that does not exist in CDF:
- local unsaved changes: catalog is kept around
- otherwise: catalog is deleted.
Because this saving-is-also-loading behaviour, the "has unsaved changes"
flags are all stored in the undo buffer; undoing after saving will not
change the CDF, but at least it'll undo the loading from disk, and it'll
re-mark any changes as "not saved".
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D12967
The epsilon was too optimistic. Snapping to hard-coded (0,-1,0) at
singularity should produce max delta 0.0005, but double it to be safe.
This only affects debug builds obviously.
These nodes just output a single value of their respective types,
making it possible to control multiple inputs with the same value.
Differential Revision: https://developer.blender.org/D12932
* Forbid editing linked palettes.
* Make `color` RNA property of ColorPalette '`LIB_EXCEPTION`', so that
the color buttons in the palette template remain active on linked data.
NOTE: This incidently makes linked palettes' colors editable from RNA,
not from UI though, so think this is OK for now.
This patch corrects the misalignment of some icons.
Some of them can't be centered because they would look blurry, but look better if shifted to the right instead of shifted to the left.
{F10864196 size=full} {F10864202 size=full}
{F10864216} {F10864228}
{F10864231 size=full} {F10864234 size=full}
{F10867008 size=full} {F10867015 size=full}
Reviewed By: #user_interface, pablovazquez
Differential Revision: https://developer.blender.org/D12789
Cython was already bundled with Blender's libraries in SVN (as dependency
of Numpy, see rB5bddfde217b1), but was never actually installed in the
CMake install step. As a result, `import cython` would fail. This is
now fixed.
Camera, lattice and speaker object types were missing there own proper
`USER_DUP_` flags, leading to not properly handling duplication of their
object data.
NOTE: We could probably simply opions here, by using categories (like
'GEOMETRY', 'SHADING', etc.) instead of exact object types. But this is
beyond bugfix scope.
* Additional structs added to the hipew loader for device props
* Adds hipRTC functions to the loader for future usage
* Enables CPU+GPU usage for HIP
* Cleanup to the adaptive kernel compilation process
* Fix for kernel compilation failures with HIP with latest master
Ref T92393, D12958
Actions of duplicated objects would not be properly made single user,
unlike obdata and materials.
Further more, there is no reason to manually handle such animdata
copying here, `BKE_id_copy_ex` can do that for us with the proper flags.
Now 'Make Single User' will also create local copy of linked data as
needed.
IMPORTANT: Unlike with local data, this always happen, even if linked
data has only one user. This avoids e.g. cases like two local objects
sharing a same linked mesh, then when calling 'Make Single User ->
Object and ObData' on both objects, yu expect both of your objects to
get localized meshes, not one of them keeping its linked, un-editable
mesh.
Mention required CUDA and OptiX compute capability and minimum driver
version. For HIP there is a placeholder until we know the supported
architectures.
Both material and world assets should be ready to use as non-experimental
feature. They were not enabled by default yet because the work from the
previous commit was needed first.
Objects should follow soon.
Maniphest Task: https://developer.blender.org/T91752
Updates UI code so that we can enable the asset UI for specific data-block
types by default, i.e. irrespective of the "Extended Asset Browser"
experimental feature.
"Mark as Asset" and "Clear Asset" are always visible in the Outliner context
menu now, but are grayed out if not applicable and show a disabled hint in the
tooltip.
A known side-effect of this: The "Mark as Asset" and "Clear Asset" operators
are enabled for action data-blocks now, even though only pose actions created
through the Pose Libraries add-on are supported. If this is something worth
addressing is being discussed still.
Differential Revision: https://developer.blender.org/D12955
Reviewed by: Sybren Stüvel
This triggered a compiler bug where it does not handle the sub.s16 PTX
instruction. Instead refactor the code so we don't need to do uint16_t
subtraction at all.
Also update OptiX device to remove the AO pass direct callable.
Thanks Patrick Mours for figuring this out.
This patch includes code from D9891 and D12754, so credit goes to Juanfran and Dalai.
I updated the patches to work with `master` and with the new overlay toggle.
The reason to include both changes as part of one patch is that the dimmed dashed lines work much better together with colored wires.
Theme setting for dash opacity:
{F11370574, size=full}
{F11286177, size=full, autoplay, loop}
{F11149912, size=full}
For adding the overlay I used `SpaceImageOverlay` as reference, although I'm not familiar with this code so there might be mistakes.
Reviewed By: #user_interface, HooglyBoogly
Differential Revision: https://developer.blender.org/D12886
This adds attribute search to the geometry nodes modifier
for the input and output attributes. The "New" search item
is only shown for the output attributes.
Some of the attribute search code is extracted to a new file
in the interface code, to avoid some code duplication.
The UI code required two fixes so that the search would work
for dynamic length strings (IDProperties do not have a fixed size).
Since this does changes to the UI layout of the modifier, I also
addressed T91485 here.
Differential Revisiion: https://developer.blender.org/D12788
Overlapped regions have transparent backgrounds, so when placing
AZONE_REGION we need to move them in to the content edge.
See D12956 for details and examples.
Differential Revision: https://developer.blender.org/D12956
Reviewed by Hans Goudey
This commit makes the bounding box node work on each unique geometry
(including instances) individually instead of making one large bounding
box for everything. This makes the node much faster, and is often the
desired result anyway. For the old behavior, a realize instances node
can be used in front of this node (versioning adds it automatically).
The min and max outputs now only output the values from the realized
geometry.
Differential Revision: https://developer.blender.org/D12951
To display the "disabled hint" (text explaining why a button is disabled) in a
tooltip, it would run the operator poll callback, which could then set a poll
message. But the context for the poll check wasn't the one from the button, so
the poll may give a different result (and disabled hint) than the check of the
button itself did.
Make sure it uses the exact context from the button.
When renaming an asset catalog, also update its simple name.
Catalogs will most likely be created from within Blender, so via the
catalog tree in the asset browser. Here catalogs are always named
"Catalog" until the user renames them, which was reflected in all simple
names being "Catalog".
When there are multiple catalogs with the same path (so different UUIDs
all mapped to the same catalog path), treat the first-loaded one as the
main catalog for that path, and the rest as aliases.
This ensures that the UUID of a catalog (as chosen in the tree UI and thus
interacted with by users) is stable, regardless of whether by some coincidence
later another catalog with the same UUID is created.
Rename `AssetCatalogPathCmp` to `AssetCatalogLessThan`:
- it compares more than paths (so no more `Path` in the name), and
- performs a less-than operation (so no more `Cmp` in the name).
Also restructure its code to make an extra upcoming comparison easier to
add.
No functional changes.
There were some issues when multiple inputs of the same node
were forced to be computed (e.g. for the spreadsheet), but none
of the node outputs (if existant) were used. Essentially the node
was marked as "finished" too early in this case.
This fix is necessary for the improved viewer node (T92167).
Similar to main path compaction that happens before adding work tiles, this
compacts shadow paths before launching kernels that may add shadow paths.
Only do it when more than 50% of space is wasted.
It's not a clear win in all scenes, some are up to 1.5% slower. Likely caused
by different order of scheduling kernels having an unpredictable performance
impact. Still feels like compaction is just the right thing to avoid cases
where a few shadow paths can hold up a lot of main paths.
Differential Revision: https://developer.blender.org/D12944
This is mainly for doversion code, when it needs to create new IDs those
should be considered as part of the same library as the current Main's
one.
No practical changes are expected here, this is more of a general
consistency fix, and a pre-requisite for {T92333}.
Caused by {rB43167a2c251b}
Code from above commit called RNA updates with a NULL scene.
This was already commented (and mostly handled) in rB5949d598bc33, but
the reported case was missing in that commit.
This fixes the crash in a similar manner as rB5949d598bc33.
Maniphest Tasks: T92272
Differential Revision: https://developer.blender.org/D12953
Since the introduction in rBfc5bf09fd88c, `BKE_pose_minmax` was not
taking these custom transforms into account (making "View Selected"
ignoring these as well and focusing on the bone instead).
Now consider these transforms in `BKE_pose_minmax`.
Maniphest Tasks: T92169
Differential Revision: https://developer.blender.org/D12942
This package allows Python scripts to handle compressed blend files (see
rB2ea66af742bc). This is for example needed by Blender Asset Tracer to
send files to a Flamenco render farm.
This change includes a new `WITH_PYTHON_INSTALL_ZSTANDARD` build-time
option, to control whether to actually install the package. For this the
already-existing approach for Requests was copied.
Reviewed By: LazyDodo, mont29, brecht
Differential Revision: https://developer.blender.org/D12777
certifi : 2020.12.5 → 2021.10.8
chardet : 4.0.0 → charset-normalizer 2.0.6
cython : 0.29.21 → 0.29.24
idna : 2.10 → 3.2
numpy : 1.19.5 → 1.21.2 (which makes it possible to remove our patch)
requests: 2.25.1 → 2.26.0
urllib3 : 1.26.3 → 1.26.7
Nowadays `requests` no longer depends on `chardet` but on
`charset-normalizer`. That project describes itself as:
> A library that helps you read text from an unknown charset encoding.
> Motivated by chardet, I'm trying to resolve the issue by taking a new
> approach. All IANA character set names for which the Python core library
> provides codecs are supported.
Reviewed By: LazyDodo, mont29, brecht
Differential Revision: https://developer.blender.org/D12777
Bump Python from 3.9.2 to 3.9.7, which is the latest 3.9 release at this
moment.
Updates to bundled Python packages will follow in a separate commit.
Reviewed By: LazyDodo, mont29, brecht
Differential Revision: https://developer.blender.org/D12777
Apple's international keyboards have an additional `kVK_ISO_Section`
key. With some (Italian, Spanish) keyboard layouts, this is `\`, `[` keys
which Blender keymap can use.
Right now this key is explicitly set as `Unknown`.
Note that `kVK_ANSI_Grave` is located in a different location.
Differential Revision: https://developer.blender.org/D12905
No need to report this, it just adds noise to the cmake config. The messages
that we need to keep are the ones about disabling tests when the test file or
idiff are missing.
When appending an asset from the asset browser, its asset data needs to
be cleared.
However, linking an asset (or regular append from the file browser)
should not clear such data. In linking case, it would be there again
after a blend file reload anyway.
So this commit introduces a new `BLO_LIBLINK_APPEND_ASSET_DATA_CLEAR`
option.
NOTE: in case the appended ID needs to be copied from its linked data
(instead of making the later directly local), asset data is lost anyway
since it is never copied with the ID currently.
Ref. {T91749} and D11768.
Show the scaled down tool icon when the tool region is collapsed. Show a
blank space when the tool region is visible.
* Minimize the UI flickering when changing the active tool.
* Show the active tool when the tool region is collapsed.
* Smaler header footprint (the tool name is not visible).
This is a follow up for T91536.
Differential Revision: https://developer.blender.org/D12939
We define the minimum exclusive number for our supported dependencies
versions, and not the maximum inclusive number.
Thanks to @sybren for raising this point and finding the 'mex' math
term.
This change simplifies the parameter list for these functions
and reduces the chance of typos mixing up array indices.
Missed in rB69102786047dccdcbaee0df6307a8c3364d28fe0.
Appended objects could be hidden, making any further operations
potentially skip the newly added objects.
Now FILE_AUTOSELECT asserts when newly added options aren't selectable.
De-duplicates wm_append_loose_data_instantiate_object_base_instance_init
and object_base_instance_init.
Add BLO_object_instantiate_object_base_instance_init which also adds to
a collection since all callers did this.
Since 2D cursor will be used rarely in VSE and it is adding visual
noise, it will be hidden by default.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12933
This change simplifies the parameter list for these functions
and reduces the chance of typos mixing up array indices.
Missed in rB69102786047dccdcbaee0df6307a8c3364d28fe0
This change simplifies the parameter list for these functions
and reduces the chance of typos mixing up array indices.
Reviewed By: campbellbarton
Ref D12950
Properties with `_funcs_runtime` are always saved when exporting keymaps.
This is an error since changing one changes all others.
For now, work around the problem by setting the `PROP_IDPROPERTY` flag.
Although the documentation says so, the null-terminator was missing.
This could cause crashes when logging shader linking errors as shader
sources are empty in this case.
For some reason the Annotate tool has an extra padding when compared to
other tools. This makes the UI to flicker a bit (specially with D12939
applied).
Differential Revision: https://developer.blender.org/D12943
Certain geometry nodes don't work properly on inputs that contain
instances, but don't display any warning that they aren't working.
The nodes now will display a warning that explains the situtation
iff the input contains any instances.
Differential Revision: https://developer.blender.org/D12858
In order to address feedback that the "Stable ID" was not easy enough
to use, remove the "Stable ID" output from the distribution node and
the input from the instance on points node. Instead, the nodes write
or read a builtin named attribute called `id`. In the future we may
add more attributes like `edge_id` and `face_id`.
The downside is that more behavior is invisible, which is les
expected now that most attributes are passed around with node links.
This behavior will have to be explained in the manual.
The random value node's "ID" input that had an implicit index input
is converted to a special implicit input that uses the `id` attribute
if possible, but otherwise defaults to the index. There is no way to
tell in the UI which it uses, except by knowing that rule and checking
in the spreadsheet for the id attribute.
Because it isn't always possible to create stable randomness, this
attribute does not always exist, and it will be possible to remove it
when we have the attribute remove node back, to improve performance.
Differential Revision: https://developer.blender.org/D12903
Easy now thanks to the main and shadow path decoupling. Doesn't help
in an benchmark scene except Spring, where it reduces render time by
maybe 2-3%.
Ref T87836
Taking advantage of the new decoupled main and shadow paths. For CPU we
just store two nested structs in the integrator state, one for direct light
shadows and one for AO. For the GPU we restrict the number of shade surface
states to be executed based on available space in the shadow paths queue.
This also helps improve performance in benchmark scenes with an AO pass,
since it is no longer needed to use the shader raytracing kernel there,
which has worse performance.
Differential Revision: https://developer.blender.org/D12900
This commit adds an updated version of the curve to points that
supports fields. Only the position and radius are transferred
by default now, which should improve performance. The other outputs
like tangent and rotation are outputted with anonymous attributes.
I took the opportunity to change a few other small things:
- Name geometry sockets "Curve" and "Points" like other nodes.
- Remove the radius multiple of 0.1, which was confusing.
Thanks to @Johnny Matthews (guitargeek) for an initial patch.
Differential Revision: https://developer.blender.org/D12887
Yet another try at that hairy issue... See comment in commit for
details, essentially this extend the workaround introduced in Objects'
`lib_override_apply_post` callback to try to also properly 're-use'
`OUTDATED` and `BAKED` flags from old source liboverride into new
destination one.
Use arrays for wmEvent coordinates, this quiets warnings with GCC11.
- `x, y` -> `xy`.
- `prevx, prevy` -> `prev_xy`.
- `prevclickx, prevclicky` -> `prev_click_xy`.
There is still some cleanup such as using `copy_v2_v2_int()`,
this can be done separately.
Reviewed By: campbellbarton, Severin
Ref D12901
Do not try to preserve edit modes of objects in non-active scenes (at
least for now), except for Pose mode.
Code was also slitghly refactored (reducing indent levels), and
comments about expected behaviors and known limitations were added.
This patch cleans up code for HIP device and makes it more consistent with the CUDA code.
It also fixes the issue with high VRAM usage on AMD cards using HIP allowing better performance and usage on cards like 6600XT.
Added a check in intern/cycles/kernel/bvh/bvh_util.h to prevent compiler error with hipcc
Reviewed By: brecht, leesonw
Maniphest Tasks: T92124
Differential Revision: https://developer.blender.org/D12834
If the current file is saved within an asset library, showing that asset
library in the Asset Browser will also display the assets from this current
file now. In fact, it's the latest state of the open file, including all
unsaved modifications.
These assets will show a little Blender icon in the preview image, which is our
usual icon for current file data.
Note that this means an important design change: The "Current File" asset
library isn't the only place to edit assets from anymore. From now on assets
from the current file can also be edited in the context of the full asset
library. See T90193 for more info.
Technical info:
Besides just including the assets from the current `Main`, this requires
partial clearing and reading of file-lists, so that asset operations (e.g.
removing an asset data-block) doesn't require a full reload of the asset
library.
Maniphest Task: https://developer.blender.org/T90193
Make the snap system consistent with the placement tool and leak-safe.
**Changes:**
- Store `SnapCursorDataIntern` in a `static` variable;
- Initialize (lazily) `SnapCursorDataIntern` only once (for the keymap).
- Move setup members of `V3DSnapCursorData` to a new struct `V3DSnapCursorState`
- Merge `ED_view3d_cursor_snap_activate_point` and `ED_view3d_cursor_snap_activate_plane` into `state = ED_view3d_cursor_snap_active()`
- Merge `ED_view3d_cursor_snap_deactivate_point` and `ED_view3d_cursor_snap_deactivate_plane` into `ED_view3d_cursor_snap_deactive(state)`
- Be sure to free the snap context when closing via `ED_view3d_cursor_snap_exit`
- Use RNA properties callbacks to update the properties of the `"Add Primitive Object"` operator
Caused by the Cycles-X merge.
The old style of tile rendering was removed, leaving the script to error
out trying to set the tile size.
Tile rendering came back in a new form (but only really relevant for
large resolution rendering), so now leave setting auto_tile & tile_size
alone (since previews are rendered at PREVIEW_RENDER_DEFAULT_HEIGHT 128
-- which should never make a difference here).
Maniphest Tasks: T91808
Differential Revision: https://developer.blender.org/D12937
* Show asset path in a (read only) text button. Makes it possible to see the
full path in the tooltip, brings support for copying the path and integrates
better with the sourrounding layout. Previous label needed lots of space to
show the full path without clipping.
* Remove "Details" panel, it only contained one item (description). That is
moved next to the name and asset path button.
* Use property split layout for name source and description buttons. Now that
there are multiple buttons, it's better to have a label for them.
* Always show operators for asset previews, just gray them out if not
applicable instead of hiding. Keeps the layout consistent and graying out is
less confusing than hiding UI elements.
Previously, when an item was active and its parent (or grand parent, etc.) was
collapsed, the active item would simply not be visible anymore. It seemed like
there was no active item. So instead, change the just collapsed parent to be
the active item then, so the active item stays visible.
When the input vector gets close to -Y, y and theta becomes totally
unreliable. It is thus necessary to compute the result in a different
way based on x and z. The code already had a special case, but:
- The threshold for using the special case was way too low.
- The special case was not precise enough to extend the threshold.
- The special case math had a sign error, resulting in a jump.
This adds tests for the computation precision and fixes the issues
by adjusting the threshold, and replacing the special case with one
based on a quadratic Taylor expansion of sqrt instead of linear.
Replacing the special case fixes the bug and results in a compatibility
break, requiring versioning for the roll of affected bones.
Differential Revision: https://developer.blender.org/D9551
Separate the huge test into huge logical parts and add more cases
to check. Also add a utility to check that the matrix is orthogonal,
with arbitrary epsilon values and calculations in double.
A couple of tests deliberately fail, to be fixed in following commits.
Ref D9551
This patch adds a "selected_movieclip_tracks" context member and enables
editing properties of multiple selected tracks via the usual Alt-click
editing (as well as the "Copy To Selected" operator). Both use
UI_context_copy_to_selected_list() to gather a list of other selected
items [which are now taken via said new context member]. Strictly
speaking, this could be done without the context member as well [just
gathering other selected tracks in UI_context_copy_to_selected_list()
without relying on a context member], but this might come in handy in
other places (e.g. Addons).
note: some could be desired for markers (e.g. editing pattern/search
areas of all selected track markers, but since this is burried in a
uiTemplate, this is a bit more work for another patch).
Differential Revision: https://developer.blender.org/D12923
Make building the thumbnail extraction executable optional,
disable on macOS as this was not linking, further, macOS doesn't use
this for thumbnail extraction so it could be left disabled.
Thumbnail extraction now shares code between Linux/Windows,
allowing thumbnails from Zstd compressed blend files to be extracted.
The main logic is placed in blendthumb_extract.cc and is built as static
library. For windows there is DLL which is registered during blender
install and which then reads and generates thumbnails.
For other platforms there is blender-thumbnailer executable file which
takes blend file as an input and generates PNG file. As a result
Python script blender-thumbnailer.py is no longer needed.
The thumbnail extractor shares the same code-path as Blenders file
reading, so there is no need to duplicate any file reading logic.
This means reading compressed blend files is supported (broken since
the recent move Zstd compression - D5799).
This resolves T63736.
Contributors:
- @alausic original patch.
- @LazyDodo windows fixes/support.
- @campbellbarton general fixes/update.
- @lukasstockner97 Zstd support.
Reviewed By: sybren, mont29, LazyDodo, campbellbarton
Ref D6408
This commit adds a node that can be used to find and replace strings
inside of the input string. One initial use case is to have an easier
way to add line breaks to strings to the string to curves node.
Differential Revision: https://developer.blender.org/D12721
If the Extended Asset Browser experimental feature was disabled, the asset
catalog operators wouldn't work. This wasn't intentional, catalogs aren't
considered experimental.
No longer save asset catalogs on blendfile save. Instead:
- extend the confirmation prompt for unsaved changes to show unsaved
catalogs.
- In the confirmation prompt, make catalog saving explicit & optional,
just like we do it for external images. {F10881736}
- In the Asset Browser catalog tree, show an operator icon to save the
catalogs to disk. It's grayed out if there are no changes to save, or
if the .blend wasn't saved yet (required to know where to save the
catalog definitions to). {F10881743}
Much of the work was done by @Severin and reviewed by me, then we
swapped roles.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D12796
Allow creating a new asset catalog in a yet-to-be-saved blend file. The
problem was caused by `AssetLibrary` not having an `AssetCatalogService`
right after creation; only after loading data from disk was this
instance created. It's now always there.
`outliner_draw_overrides_buts` uses `uiDefIconBlockBut` but doing so
without defining a function callback to actually build a block.
This will make the button go down the route of spawning a popup, but
without a menu. Crash then happens later accesing the (missing) menu in
`ui_handler_region_menu`.
So while we could dive into making this usage failsafe (carefully
checking `BUTTON_STATE_MENU_OPEN` in combination with
`uiHandleButtonData->menu` being NULL all over), but it seems much more
straightforward to just use `uiDefIconBut` (instead of
`uiDefIconBlockBut`) since this Override Warning buttons seem not to
intend spawning a menu anyways?
Maniphest Tasks: T92265
Differential Revision: https://developer.blender.org/D12917
In 2.93 and before, when appending wityh 'localize all' off, all linked
IDs (including indirectly linked ones) from initial library would be
made local.
In 3.0, after refactor from rB3be5ce4aad5e, only directly linked IDs
(i.e. user-selected IDs) would be made local.
This change was not intentional (result of confusing code and naming in
previous implementation), and old behavior is used in some workflows to
control which data is kept linked and which data is made local.
This commit revert to 2.93 behavior.
NOTE: there is still an (extreme) corner case where behavior is
different between 2.93 and 3.0:
If you append (at the same time) object A from LibA.blend, and object B
from LibB.blend, and object B uses somehow a material from LibA.blend:
* In 2.93, that material would have been made local (because it belonged
to one of the 'initial' libraries, even though not the initial lib of
object B).
* In 3.0, this material will remain linked, since from object B
persective it comes from a different library.
When using `asset_mark` function from a Python script and afterwards
updating the preview image, a crash might happen. The preview image is
generated by the `asset_mark` function. This may happen on a background
thread, introducing potential synchronization issues.
This patch fixes this by separating the preview generation
`ID.asset_generate_preview` from the mark as asset `ID.asset_mark`.
Note: this separation of "mark as asset" and "generate preview" also
applies to the `ED_asset_mark_id()` C function; if it is desired to have
previews rendered after marking as asset, a call to
`ED_asset_generate_preview()` is now also required.
Reviewed By: sybren
Maniphest Tasks: T91197
Differential Revision: https://developer.blender.org/D12922
This patch includes an updated version of the raycast node that uses
fields instead of attributes for inputs instead of outputs. This makes
the node's UI much clearer. It should be faster too, since the
evaluation system for fields provides multi-threading.
The source position replaces the input geometry (since this node is
evaluated in the context of a geometry like the other field nodes).
Thanks to @guitargeek for an initial version of this patch.
Differential Revision: https://developer.blender.org/D12638
Make `AssetLibraryService::get_asset_library_on_disk(path)` insensitive
to trailing slashes; i.e. `get_asset_library_on_disk("/path")` and
`get_asset_library_on_disk("/path/¨)` will now return the same
`AssetLibrary*`.
`BKE_callback_remove` now checks whether the callback actually is known,
before trying to remove it.
`BKE_blender_atexit()` runs after `BKE_callback_global_finalize()`. When
an at-exit callback tried to unregister its BKE callbacks, these would
already be unregistered, causing a crash of Blender when exiting,
This commit removes the implicit conversion from points to a mesh
that used to happen before the next modifier. It also removes the
implicit realizing of instances that happened before another modifier.
Now we have specific nodes for both of these operations, the
implicit conversions make less sense, and implicit instance
realizing has already been removed in other nodes.
This adds another geometry nodes modifier before modifiers that would
have realized instances implicitly before. Currently adding another
data-block during versioning after linking means that an assert needs
to be changed. That should be made unnecessary by T92333.
Differential Revision: https://developer.blender.org/D12722
These transparent shadows can be expansive to evaluate. Especially on the
GPU they can lead to poor occupancy when only some pixels require many kernel
launches to trace and evaluate many layers of transparency.
Baked transparency allows tracing a single ray in many cases by accumulating
the throughput directly in the intersection program without recording hits
or evaluating shaders. Transparency is baked at curve vertices and
interpolated, for most shaders this will look practically the same as actual
shader evaluation.
Fixes T91428, performance regression with spring demo file due to transparent
hair, and makes it render significantly faster than Blender 2.93.
Differential Revision: https://developer.blender.org/D12880
The motivation for this is twofold. It improves performance (5-10% on most
benchmark scenes), and will help to bring back transparency support for the
ambient occlusion pass.
* Duplicate some members from the main path state in the shadow path state.
* Add shadow paths incrementally to the array similar to what we do for
the shadow catchers.
* For the scheduling, allow running shade surface and shade volume kernels
as long as there is enough space in the shadow paths array. If not, execute
shadow kernels until it is empty.
* Add IntegratorShadowState and ConstIntegratorShadowState typedefs that
can be different between CPU and GPU. For GPU both main and shadow paths
juse have an integer for SoA access. Bt with CPU it's a different pointer
type so we get type safety checks in code shared between CPU and GPU.
* For CPU, add a separate IntegratorShadowStateCPU struct embedded in
IntegratorShadowState.
* Update various functions to take the shadow state, and make SVM take either
type of state using templates.
Differential Revision: https://developer.blender.org/D12889
Some compositing applications do not support spaces and dots in layer names, and change
these to other symbols on import. This causes various compatibility issues, including
with Cryptomatte metadata. While technically those could be considered bugs in the
Cryptomatte implementation of other software, where they are not properly accounting for
that layer renaming, it's not ideal.
The OpenEXR channel naming convention is "layer.pass.channel". We get away with dots in
the layer name since we parse this from right to left, but it's a weak assumption.
Now we don't forbid using spaces or dots, and existing files are unchanged. But at
least by default names will be compatible, and hopefully other software catches up in
time to support more flexible layer names.
Ref T68924
OpenEXR uses "." to separate layers/passes/channels, so using AOV.001 is
a problem. Other applications will not be able to parse it correctly.
Default to AOV_001 instead, and don't allow using dots in AOV names.
Fixes T89991
Ref T73266
Ref D12871
Need to initialize components for the full Diffuse BSDF.
Steps to reproduce:
- Default cube scene
- Switch to Cycles renderer
- Enable OSL backend
- Start viewport render
- Observe cube being much black
Differential Revision: https://developer.blender.org/D12921
A Clang-Format configuration to make the closure definition block to
be properly recognized as such.
Also small wrapper macro to avoid comma in the actual definition code
which was causing unwanted indentation of parameters definition.
Requires Clang-Format 7 or newer. The version we ship in the libs is
12, so for recommended development setup it should all be good.
Differential Revision: https://developer.blender.org/D12920
The thread affinity setting in OIDN can break multithreading on some CPUs.
While this leads to somewhat worse performance on CPUs that do work correctly,
it's better than having some CPUs use only half the cores.
The lookup tables are to be initialized after device free.
On Linux was only noticeable when rendering default cube scene with
an extra assert. On Windows it was causing an assert in STL in debug
builds.
Differential Revision: https://developer.blender.org/D12918
We do this in other nodes to reduce overhead of using the same node more
than once. I don't think it will make a difference with index nodes
currently, but at least it's consistent.
noise.cc uses std::min and std::max without
including the algorithm header required.
Newer MSVC versions and GCC implicitly include
it somewhere, which isn't something we should
count on. Best to include what you use.
Even though these nodes do support fields internally, there are no
input string sockets that support fields currently, so removing
the diamond sockets for now helps avoid confusion.
Differential Revision: https://developer.blender.org/D12828
Split thumbnail job in 2 passes. First pass will render visible images
and second part renders set of "guaranteed" equally spaced images.
When viewing larger amount of strips, it is likely that only 1 or 2
images will be rendered in first pass, while in second pass it is up to
30 images.
This results (seemingly) in 3x better performance, but zooming before
set of guaranteed images is done will be slightly more inaccurate.
During rendering VSE cache is invalidated, so thumbnails would be
removed and thumbnail job would constantly restart.
Even if thumbnails would be preserved, resources should be dedicated
for rendering job.
When the 'Separate Children' option is selected, the children of
the selected collection are inserted into the geometry output
sorted alphabetically by name.
One item to note is that the rename function does not trigger a
depsgraph update. This means that the changes are not reflected
in the spreadsheet until another action triggers the update.
Differential Revision: https://developer.blender.org/D12907
Move the static functions higher in the file so they are usabl
for an upcoming patch, and make it use clearer names instead
of overloading a function name.
Pencil
Not naming the auto-generated vertexgroup after the selected bone was
just confusing (since the group would not have an effect), so now use
similar code that is used for meshes for greasepencil as well.
Maniphest Tasks: T92314
Differential Revision: https://developer.blender.org/D12906
* Rename struct KernelGlobals to struct KernelGlobalsCPU
* Add KernelGlobals, IntegratorState and ConstIntegratorState typedefs
that every device can define in its own way.
* Remove INTEGRATOR_STATE_ARGS and INTEGRATOR_STATE_PASS macros and
replace with these new typedefs.
* Add explicit state argument to INTEGRATOR_STATE and similar macros
In preparation for decoupling main and shadow paths.
Differential Revision: https://developer.blender.org/D12888
Instead of switch statements, make use of generic virtual arrays
so the code is shorter and easier to read.
Differential Revision: https://developer.blender.org/D12908
It seems possible to switch object selection (if `Lock Object Modes` is
turned off) and end up with an object that has a SculptSession but a
NULL PBVH.
(I was not able to repro from scratch, but file from the report was
clearly in that state).
This would crash in displaying scene statistics.
While there might be a deeper fix (making sure PBVH is available early
enough -- possibly using `BKE_sculpt_object_pbvh_ensure`,
`sculpt_update_object` or friends), there are also many checks in tools
for PBVH, so the situation seems to be somewhat vaild/expected also in
other places.
So to fix this, just check for a non-NULL PBVH, returning early
otherwise.
Note: this leaves us with displaying 0/0 Faces & Vertices in the borked
case until an operation takes place that updates the PBVH.
Maniphest Tasks: T92246
Differential Revision: https://developer.blender.org/D12904
The old code only worked when built-in nodes are only unregistered
at most once while Blender is running. However, this is not the case
when running certain unit tests such as `AbstractHierarchy*`
in `blender_test`.
Found by Sybren, thanks.
In an attempt to reduce scrolling. This can be re-visited if a kind of switch
between "compact" and "comfortable" UI size is implemented in the future.
On GCC in release mode (and maybe also debug mode without ASAN enabled),
allocating an `AssetLibraryService` will reuse the space that should
have just been freed. This made a test fail, as it was testing that new
memory was allocated and not some old instance reused.
To ensure that the calls that should allocate a new block of memory
return a unique pointer, I added some dummy allocation to the test.
No functional changes to Blender
Previously, every node had its own declaration. This isn't ideal, because
it's often the case that all nodes of the same type have the same declaration.
That's the case for all nodes using declarations currently. It will not be true
for e.g. group nodes in the future.
Sharing node declarations between nodes makes it a bit more efficient.
Differential Revision: https://developer.blender.org/D12898
This was caused by `DRW_view_data_texture_list_size_validate` which now
delete everything from the render engine.
This might change in the future but for now we just avoid calling it from
the render loop (when using DRW_cache_restart).
CD_PROP_COLOR vertex data is stored in scene linear while legacy vertex
colors are srgb, so both operators also need to do this conversion
Reviewed By: sergey
Maniphest Tasks: T79005
Differential Revision: https://developer.blender.org/D8320
Adds a button, Update All Paths, to the Motion Paths property tabs and
will always show. The operator goes through all visible objects and
updates their motion paths.
The current implementation has a subtle functional change. Calculating
or updating motion paths for armature objects (through the Object tab,
not Armature tab) now also updates the paths for its bones. We could
preserve the old behavior but it doesn't seem necessary. It seems more
likely that the animator wants to update both anyways.
Reviewed by: sybren
Maniphest Tasks: T83068
Differential Revision: https://developer.blender.org/D11667
Add `blender::bke::AssetLibraryService` class that acts like a
blendfile-scoped singleton. It's allocated upon the first call to
`BKE_asset_library_load` and destroyed in the LOAD-PRE handler.
The `AssetLibraryService` ensures that edits to asset catalogs are not
lost when the asset browser editor closes (or even reloads). Instead,
the `AssetLibrary` pointers it owns are kept around as long as the blend
file is open.
Reviewed By: Severin
Maniphest Tasks: T92151
Differential Revision: https://developer.blender.org/D12885
The Endpoint Selection node allows for the Selection of an aribitrary
number of endpoints from each spline in a curve. The start and end
inputs are evaluated on the spline domain. The result is outputted
as a boolean field on the point domain.
Differential Revision: https://developer.blender.org/D12846
Previously, some multi-functions were allocated in a resource scope.
This was fine as long as the multi-functions were only needed during
the current evaluation of the node tree. However, now cases arise
that require the multi-functions to be alive after the modifier is finished.
For example, we want to evaluate fields created with geometry nodes
outside of geometry nodes.
To make this work, `std::shared_ptr` has to be used in a few more places.
Realistically, this shouldn't have a noticable impact on performance.
If this does become a bottleneck in the future, we can think about ways
to make this work without using `shared_ptr` for multi-functions that
are only used once.
Move most of the gizmo snap and placement code to `view_cursor_snap.c`.
Simplify and extend the snap API.
Differential Revision: https://developer.blender.org/D12868
- Rename RNA SpaceSeq.show_strip_overlay to show_overlays
matching the 3D View, the term "strip" was misleading as this is used
for the preview as well.
- Rename various RNA overlay settings to overlay_frame
since "Frame Offset" is a specific feature, avoid having both
Editor.show_overlay and SpaceSeq.show_overlays.
- Rename Editing `over_*` -> `overlay_frame_*` in DNA,
as well as flags.
Add an outine around the playhead, matching the color of the background (slightly darkened)
to improve the readability of the current frame line when placed against curves or strips
with a similar color.
{F10944336, size=full}
Differential Revision: https://developer.blender.org/D12810
Currently, the background color of headers gets darkened when the editor is not active,
this makes it hard to theme, and adds contrast/noise when it's not needed.
This patch makes headers use the regular theme color when the editor is not active, so it
can be made to flush with the background more easily. And lightens the header (by +10,
same value as before) when the editor is active, providing the wanted highlight.
The motivations behind this change are:
* Simplify picking a theme color for headers.
* Widgets already become lighter on mouse hover, this change creates a connection with that concept.
Left: current master, inactive header is darkened.
Right: this patch, inactive header gets the theme color, active editor gets header in a slightly lighter color (like most widgets)
{F11052503, size=full, loop, autoplay}
Reviewed By: #user_interface, HooglyBoogly
Differential Revision: https://developer.blender.org/D12856
Back in Blender 2.30, the GUI project brought panels into Blender among other important visual updates.
For the first time it was possible to move the wall of buttons around. Providing a clear separation
between sections (it even allowed the grouping of panels in tabs!)
During the 2.5 redesign, the separation between panels became a line on top of each panel, and panels received
theme settings for background and header colors. The default theme used the same color for both.
In 2.8 the background color of panels was different from headers in the default theme, so the separator
line was removed. While the separator line wasn't elegant (only on top, non-themeable, hard-coded emboss effect),
it provided a sort of separation between panels.
This patch solves the panels-separation by simply adding a margin space around them (not visible in default theme yet).
Even though the margin reduces the width of the working area slightly, it makes room for the upcoming always-visible scrollbars.
Other adjustments:
* Use arrow icon instead of triangle to collapse/expand
* Use rounded corners to match the rest of the UI (editor corners, nodes, etc).
{F10953929, size=full}
Margin on panels makes use of the `style->panelouter` property that hasn't been
used in a while. Also slight tweaks to `boxspace` and `templatespace` style properties so they
are multiples of 2 and operations on them round better.
There is technically no need to update the themes for them to work, so no theme changes are included in this patch.
{F10953931, size=full}
{F10953933, size=full}
{F10953934, size=full}
{F10954003, size=full}
----
A new theme setting under Style controls the roundness of all panels (added it to Style instead of ThemeSpace because I think controlling the panel roundness per editor is a bit overkill):
{F11091561, size=full, autoplay, loop}
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D12814
This does not change the behavior when there are no mistakes in the node tree.
The visualization does change when a field is connected to an input that cannot
be a field.
Differential Revision: https://developer.blender.org/D12877
Feedback was that the two column menu felt odd, and that the "Custom" and
"Built-in" headings for each column were more confusing than helpful. So
changing this to a single column menu with separator lines instead of headings.
Tools currently used by VSE don't have much useful settings, but they
use a lot of space. Therefore these headers will be hidden by default.
Property `show_region_tool_header` was added to view menu to enable tool
settings.
This could be resolved by region overlap, but it isn't working well
currently.
Differential Revision: https://developer.blender.org/D12875
Since points aren't relevant in function nodes, replace all mentions
of it with "local" to illustrate rotations done in local-space instead.
Differential Revision: https://developer.blender.org/D12881
Commit 213554f24a added slope/offset/power controls to the sequencer
color balance modifier, but colors in this mode were not initialized
with old files.
Initialize colors to default values.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D12806
Commit e1665c3d31 added math to do 2D affine transformations with 3x3
matrices, but these matrices are also used for 3D transformations.
Remove added functions and use 4x4 matrices for 2D transformation.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12510
Issue was caused by adding `seq->sound` check in ded68fb102 in
function `BKE_sound_scene_add_scene_sound` as `offset_time` field was
introduced to resolve sub-frame a/v misalignment.
Scene strips don't have `bSound` allocated but also don't suffer from
a/v misalignment.
Remove `seq->sound` check and don't apply any offset for scene strips.
Reviewed By: zeddb, sergey
Differential Revision: https://developer.blender.org/D12819
This is caused by removing `gizmo_cage2d_modal()` code in 482806c816.
Some areas use cage gizmo to modify RNA properties without using
transform operator like area light, image empty, and compositor preview.
This functionality is implemented in code that was removed.
Add this code back.
Reviewed By: zeddb, campbellbarton
Differential Revision: https://developer.blender.org/D12859
Replaces the old Subdivision Surface Node.
Changes:
- Removes implicit instance realization, instead the node runs once
per unique instance.
- "Use Creases" becomes a crease field input applied to edges.
The values are clamped between zero and one.
Addresses T91763
Differential Revision: https://developer.blender.org/D12830
The object info node output an instance as a performance optimization.
Before that optimization was (almost) invisible to the user, but now
that we aren't automatically realizing instances, it isn't intuitive
for a single object to become an instance.
I refactored the transform node so its ability to translate/transform
an entire geometry set was more usable from elsewhere and exposed the
function to get a geometry set from an object.
Differential Revision: https://developer.blender.org/D12833
This commit adds an updated version of the old attribute transfer node.
It works like a function node, so it works in the context of a
geometry, with a simple data output.
The "Nearest" mode finds the nearest element of the specified domain on
the target geometry and copies the value directly from the target input.
The "Nearest Face Interpolated" finds the nearest point on anywhere on
the surface of the target mesh and linearly interpolates the value on
the target from the face's corners.
The node also has a new "Index" mode, which can pick data from specific
indices on the target geometry. The implicit default is to do a simple
copy from the target geometry, but any indices could be used. It is also
possible to use a single value for the index to to retrieve a single
value from an attribute at a certain index.
Differential Revision: https://developer.blender.org/D12785
Instead of checking whether the socket value was hidden, use the proper
node declaration to check whether the socket has an implicit input. The
remaining larger change to make is allowing nodes to specify what their
implicit input should actually be.
This commit removes the constant padding around to the left and
right of the curve widget. The padding worked in screen space and
didn't take UI scale/zoom into account. This makes the curve widget
consistent with the more recently added curve profile widget used
for bevel profiles.
Differential Revision: https://developer.blender.org/D12883
Checking RNA_MAGIC is not enough to identify the ID property case which always
needs updates. If the property is already resolved to an RNA property we need
to check the flag too.
This menu doesn't have an effect on the importing while in the "Current File"
asset library. This can be quite confusing.
However, just hiding the menu may be a temporary solution. Decision
actually to instead show a different menu, that allows choosing between
duplicating and reusing data on drop. This is being reviewed here
https://developer.blender.org/D12879.
Meanwhile (or in case we end up rejecting that), this change should
avoid some confusion.
Differential Revision: https://developer.blender.org/D12752
This is caused by {rB3b6ee8cee708}.
Since rigging curves with armatures only works with envelopes (if I am
not mistaken), this stirs up the question again why we actually give the
choice for vertex groups in parenting. Anyways, curves can have armature
modifiers and renaming bones should not crash.
Now make sure we only go down the route of `BKE_object_defgroup_list`
and `BKE_object_defgroup_find_name` if vertex groups are actually
supported.
Maniphest Tasks: T92083
Differential Revision: https://developer.blender.org/D12876
There was a rare crash in WM_event_get_keymap_from_toolsystem_fallback
when wm->winactive was NULL.
This could happen when the event was handled
immediately after closing a window.
The issue was that this menu was only looking at socket templates,
but not at the new node declarations. This fix is to just check those
as well. The fix comes with a small refactor that makes the memory
management a bit simpler.
Differential Revision: https://developer.blender.org/D12866
`BLF_height_max()` uses the tallest character in the font, and many characters
in our font are taller than numbers. Use `BLF_height` with `0` as reference instead.
Fix by @harley, thanks!
There were several places attempting to check to see if scene lights
and world were enabled for display. This tries to find a common place
for both of these to reduce duplication.
Honestly, I couldn't find a really good spot for these and settled on
DRW_engine. It's not the best spot since they're not strictly drawing
related, but let's start here.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D12658
Shortcut lookups for property buttons were only supported for a subset
of RNA types.
Replace inline data-path calculation with
WM_context_path_resolve_property_full.
Now the shortcut for the 3D View's overlay toggle (for e.g.) is shown.
In editors with vertical scale indicators, such as Graph Editor,
Drivers, or VSE, display the values aligned to the view.
Also add a shadow (similar to the 3D View info) to improve readability when the text is on top of curves, strips, or other content.
{F10987240, size=full}
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D12809
While there may be arguments for different positions of the selection
inputs, it's important to be consistent, and putting them right after
the corresponding geometry works well when there are multiple
geometry inputs. Addresses T91646.
Avoiding creating empty components can be a hassle for code that
interacts with a geometry set. One easy way to do that was calling
the functions that retrieved mutable access to geometry data directly,
like get_mesh_for_write. This commit makes it so that sort of direct
function does not create an empty component if there is no data.
Another way to create an empty component was calling the replace_*
methods with a null pointer. It's more convenient to have a nice API
that handles those cases without creating an empty component.
It's still convenient that the regular get_component_for_write adds
the component if it doesn't exist, because that's often a nice way to
add data to the geometry set.
Differential Revision: https://developer.blender.org/D12862
This commit adds a fields version of the mesh to curve node, with a
field for the input selection. In order to reduce code duplication,
it adds the mesh to curve conversion to the new geometry module
and calls that implementation from both places.
More details on the geometry module can be found here: T86869
Differential Revision: https://developer.blender.org/D12579
Currently `PoseBone.children` is implemented by a linear scan of
the list of armature bones. This is doubly inefficient, since
not only is it scanning all bones, the `obj.data.bones` list
is actually synthetic and generated from Bone children lists.
Instead, use the `Bone.children` native RNA property.
Differential Revision: https://developer.blender.org/D12727
Regression introduced in {rBb0d9e6797fb8}.
Previously the Graphics Editor had a conflict with two different snap
types. Auto-Snap and Snap with Ctrl.
It is now clearer which snap should prevail.
Sometimes it's useful to pass around a set of values with a generic
type. The virtual array data structures allow this, but they don't
have logical ownership. My initial use case for this is as a return
type for the functions that interpolate curve attributes to evaluated
points, but a need for this data structure has come up in a few other
places as well. It also reduced the need for templates.
Differential Revision: https://developer.blender.org/D11103
This is the first of a sequence of changes to support compiling Cycles kernels as MSL (Metal Shading Language) in preparation for a Metal GPU device implementation.
MSL requires that all pointer types be declared with explicit address space attributes (device, thread, etc...). There is already precedent for this with Cycles' address space macros (ccl_global, ccl_private, etc...), therefore the first step of MSL-enablement is to apply these consistently. Line-for-line this represents the largest change required to enable MSL. Applying this change first will simplify future patches as well as offering the emergent benefit of enhanced descriptiveness.
The vast majority of deltas in this patch fall into one of two cases:
- Ensuring ccl_private is specified for thread-local pointer types
- Ensuring ccl_global is specified for device-wide pointer types
Additionally, the ccl_addr_space qualifier can be removed. Prior to Cycles X, ccl_addr_space was used as a context-dependent address space qualifier, but now it is either redundant (e.g. in struct typedefs), or can be replaced by ccl_global in the case of pointer types. Associated function variants (e.g. lcg_step_float_addrspace) are also redundant.
In cases where address space qualifiers are chained with "const", this patch places the address space qualifier first. The rationale for this is that the choice of address space is likely to have the greater impact on runtime performance and overall architecture.
The final part of this patch is the addition of a metal/compat.h header. This is partially complete and will be extended in future patches, paving the way for the full Metal implementation.
Ref T92212
Reviewed By: brecht
Maniphest Tasks: T92212
Differential Revision: https://developer.blender.org/D12864
This is available in the DopeSheet, GraphEditor, and NLA Editor.
Currently:
- Dopesheet advertises to take selection into account...
-- ...but doesnt - which might be a mistake in rBe3842d1ca4dd
- Graph Editor does not mention selection...
-- ...and also does not take it into account
- NLA does not mention selection...
-- ...but takes it into account
Now:
- make them **all** take selection into account (you can still do a
quick 'Select All' prior to get the full range -- better than not being
able to set this based on selection)
- mention this for all in the tooltip
- also reword to 'Set Preview Range to Selected' since using the term
'Auto' impilies this would change on selection change.
Maniphest Tasks: T91743
Differential Revision: https://developer.blender.org/D12651
The sockets are not exposed in any nodes yet.
They work similar to the Object/Collection/Texture sockets,
which also just reference a data block.
Based on rB207472930834
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D12861
Remove `BLI_assert_unreachable()` in a spot that is actually easily
reachable. To reach, follow these steps:
- Configure three asset libraries (say A, B, and C) in preferences
- Set the asset browser to library C and save the file
- Remove asset library C from the preferences
- Reopen the file.
This patch adds activate_file_by_relative_path(relative_path="") and
deselect_all() function to the space api of the File Browser. While the
first sets the active file and adds it to the selection based on a
relative path to the current File Browser directory the second one
deselects all files but does not change the active file.
Differential Revision: https://developer.blender.org/D12826
Reviewed by: Julian Eisel
The Alembic/CacheFile modifier supports Cycles procedurals when Cycles
is configured to use experimental features; the check for this would
segfault on builds with `WITH_CYCLES=OFF`. This is now fixed by adding
an extra NULL check.
This was caused by camera background being rendered in world space, causing
floating point imprecision issues when camera was far from origin.
Adding a uniform to change vertex shader to process everything in viewspace
to fix the problem.
The assumption about absent shadow path was wrong.
The rest of the changes are to ensure shadow paths are finished prior
to the split, so that they write to the proper passes.
The issue was caught by running regression tests on OptiX.
Differential Revision: https://developer.blender.org/D12857
Object deletion was reporting the number of objects deleted,
causing tests to print noisy output.
Now this is information is only included when invoked.
Add a boolean field to the Set Position Node. This value allows
for each point to either have its position set to the input position
value or have the input value added to the current position.
Differential Revision: https://developer.blender.org/D12773
This is especially noticeable when using the default center with full
width and height as some borders are masked by 1 pixel.
The relative coordinates are now calculated respect the last ones
instead of the dimensions for centering, and the limits
are inclusive to mask more accurately.
The planar reflections being rendered at the same resolution as the HiZ max
buffer, do not need any uv correction during raytracing.
However, the GTAO horizon buffer being at output resolution do need the
uv factors in order to match the pixels visible on screen. To avoid many
complication, we increase the size of the GTAO texture up to the hiz buffer
size. This way, if planar reflections need GTAO the texture is big enough.
We change the viewport of the GTAO framebuffer for the main view in order
to not have to modify Uvs in many places.
This changes the edge split node to have a selection input, which is
more aligned with the other design changes. This loses the ability to
split edges based on an angle, but the edge angle can be added as a
field input node in the future, which will make for a much more
flexible system.
Differential Revision: https://developer.blender.org/D12829
Previously the attribute capture node only worked on realized geometry,
which was very confusing when other nodes worked on each individual
instance. The realize instances node is the way to explicitly change
between the two behaviors. Addresses T92155.
Differential Revision: https://developer.blender.org/D12841
Adds a node that can rotate each of a geometry's instances in global
(to the modifier object) or local space (of each point) by a specified
angle around a pivot point.
In the future, separating the local-global choice for the pivot and the
rotation might be useful. However, for now the node is kept simple.
Differential Revision: https://developer.blender.org/D12682
These 2 large tables, `areaTexBytes` and `searchTexBytes`, contributed
~176kb worth of duplicate data into the `blender` executable due to the
header being used in multiple places. We were lucky that only 2
translation units had included this header so only 1 duplicate copy of
each was wasted.
Define the tables as `extern` to address this.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D12723
Adds a node that can scale a geometry's instances. With "Local" turned
on, the instance is scaled individually from the center point input,
while when local space is turned off, it's more like the transform
node, except it scales outward from the center point instead of only
from the origin.
Differential Revision: https://developer.blender.org/D12681
Add a boolean selection field to the Instance on Points node.
This will select which points from the source geometry will be used
to create the instances.
Differential Revision: https://developer.blender.org/D12847
Adds a node that can translate instances in the transform space of
the modifier object, or the local space of their original transform.
One reason to have a special node for instances is that they always
have the existing transform, unlike mesh or point cloud points.
Differential Revision: https://developer.blender.org/D12679
Copy-on-write data blocks could be referenced from python but were not
properly managing python reference counting.
This would leak memory for any evaluated data-blocks accessed by Python.
Reviewed By: sergey
Ref D12850
Seems to be residue from an early 2.80 days: the placeholder code path
is no longer used.
Remove all the tricky code for this, and make it clear that the
`deg_expand_copy_on_write_datablock` is used on an non-expanded
datablock.
Should be no functional changes. And should help simplify D12850.
Differential Revision: https://developer.blender.org/D12852
Menu items ignore the roundness setting since they spread left to right.
This patch makes it so menu items use the theme preference instead of
hardcoded square corners. Providing more flexibility to themes.
All built-in and included themes already have this set so no need to update them. For the default themes (Dark/Light) roundness is 0.4.
{F10950727, size=full}
The motivations behind this change are:
* To be more consistent with other widgets.
* Improve themes flexibility.
* Match padding with other elements that have like the Search field:
{F10950746, size=full}
Reviewed By: #user_interface, Severin
Differential Revision: https://developer.blender.org/D12813
Change is simple enough, but we abuse a bit the UI code here to get a
similar 'look' as the fake user button for the new Asset one, while
still being able to call an operator instead of editing directly a RNA
value.
Reviewed By: Severin, sybren
Maniphest Tasks: T92113
Differential Revision: https://developer.blender.org/D12839
This reverts commit 0558907ae6.
Based on discussion with Sergey, having Python references to un-expanded
data should not happen - this change needs to be reconsidered.
When baking in a debug build running gdb it kept asserting because a GL context was being created outside the main thread.
To fix this the patch only creates the GL context is only created for rendering (when it is actually used).
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D12767
Some runtime data that stores which sockets can be fields and which
can't is not stored in the file, but only calculated when necessary.
When opening a file, the node tree update function was called, which
recalculated this data, but that was explicily turned off for undo.
This exposes a fundamental issue with undo, the ID caching system for
undo, and how it relates to node trees in particular. Ideally this call
couldn't be necessary at all. In the future it could be removed by
adding a runtime struct to node trees, and calculating its contents
on-demand instead of preemtively.
Differential Revision: https://developer.blender.org/D12699
Check when the node fails to create BVH trees, and fill the result
with zero in that case, which is most likely the expected value when
the node encounters an error. Warnings will be added with a separate
patch.
When assigning a new catalog ID to an asset, also refresh the "catalog
simple name". This "simple name" is stored on the asset metadata next to
the catalog UUID, to allow some emergency data recovery when the catalog
definition file is somehow lost.
There was only a check for the component but not for if it was empty.
Because the curve fill node produces an empty curve component, a
nullptr was read, causing a crash. Generally nodes shouldn't produce
empty components, but currently we cannot rely on that fact.
Differential Revision: https://developer.blender.org/D12838
There was a double lock in the object depth drawing function.
Also the texture read was not reading the texture with the right
format. Now it needs a conversion.
Fix T91981 Particle Edit make Blender Crash
Fix T92006 Light spot interactively point can't use
This makes sure the previously bound context is restored after creating a
new context. This follows what is already happening on windows.
All system backend are patched.
This also removes the goto and some code duplication.
Differential Revision: https://developer.blender.org/D12455
Since `AssetCatalogPath` isn't default constructible (unlike the
previous `CatalogPath`, alias `std::string`), `AssetCatalog` isn't
default constructible either. But its default constructor is declared
with `= default` which Apple Clang was warning about.
Differential Revision: https://developer.blender.org/D12714
Reviewed by: Sybren Stüvel
This confirmation popup was added when deletion was a destructive action that
would be written to disk immediately, with no way to undo. Now we only write
such changes to disk on .blend file save, plus there's undo/redo support for
catalog edits now. In such cases confirmation popups should be avoided.
Allow undo/redo of asset catalog edits with Ctrl+Z/Ctrl+Shift+Z. These
keys are registered in the 'screen' keymap, so that they can take
priority over the global undo/redo operators.
Updated both Blender Default and Industry Compatible keymaps.
Ensure that catalog operations create an undo snapshot, and show
undo/redo operators in the asset browser.
A hidden operator `ASSET_OT_catalog_undo_push` is also added such that
add-ons can also set undo snapshots if they need.
Rename `bke::AssetCatalogService::store_undo_snapshot` to `undo_push`.
This makes the function named the same way as the global Blender "undo
push" function.
No functional changes.
Add an undo stack for catalog edits. This only implements the backend,
no operators or UI yet.
A bunch of `this->xxx` has been replaced by `catalog_collection_->xxx`.
Things are getting a bit long, and the class is turning into a god
object; refactoring the class is tracked in T92114.
Reviewed By: Severin
Maniphest Tasks: T92047
Differential Revision: https://developer.blender.org/D12825
Recursively delete asset catalogs with `AssetCatalogService:prune_...`
functions. This deletes the catalog and all of its children.
The old `delete_catalog` function has been renamed to
`delete_catalog_by_id()`, and is now a lower-level function (no deletion
of children, no rebuilding of the tree). The `prune_catalogs_by_path()`
and `prune_catalogs_by_id()` do delete children and do rebuild the
catalog tree.
Manifest task: T91634
Simplify the testing code that verifies the asset catalog tree. It now
prints clearer error messages when things go wrong, and it gets simpler
data to test (instead of having to explicitly pass the parent count, it
just counts the number of separators in the expected path).
No functional changes to Blender.
Keep track of the source library allowing other parts of the code to
to make better decisions. This is needed to localize external files.
In this case the file paths are updated when `making local`.
But we should decide based on the source library if we want to
copy the file relative to the new blend file. See D12423.
Reviewed By: mont29, Severin
Differential Revision: https://developer.blender.org/D12765
Addresses T77127 (Controller Drawing).
Adds VR controller visualization and custom drawing via draw
handlers. Add-ons can draw to the XR surface (headset display) and
mirror window by adding a View3D draw handler of region type 'XR' and
draw type 'POST_VIEW'. Controller drawing and custom overlays can be
toggled individually as XR session options, which will be added in a
future update to the VR Scene Inspection add-on.
For the actual drawing, the OpenXR XR_MSFT_controller_model extension
is used to load a glTF model provided by the XR runtime. The model's
vertex data is then used to create a GPUBatch in the XR session
state. Finally, this batch is drawn via the XR surface draw handler
mentioned above.
For runtimes that do not support the controller model extension, a
a simple fallback shape (sphere) is drawn instead.
Reviewed By: Severin, fclem
Differential Revision: https://developer.blender.org/D10948
As part of expected behavior this printed an exception,
making it seem as if there was an error in the test.
Now the exception is suppressed from the output, ensuring it matches
an the expected output.
Introduces `BKE_appdir_folder_caches` to get the folder that
can be used to store caches. On different OS's different folders
are used.
- Linux: `~/.cache/blender/`.
- MacOS: `Library/Caches/Blender/`.
- Windows: `(%USERPROFILE%\AppData\Local)\Blender Foundation\Blender\Cache\`.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D12822
Integrates XR input actions with the WM event system. With this commit,
all VR action functionality (operator execution, pose querying, haptic
application), with the exception of custom drawing, is enabled.
By itself, this does not bring about any changes for regular users,
however it is necessary for the upcoming VR add-on update that will
expose default controller actions to users.
For add-on developers, this updates the Python API with access to XR
event data (input states, controller poses, etc.), which can be
obtained via the "xr" property added to the bpy.types.Event struct.
For XR events, this property will be non-null and the event will have
the type XR_ACTION.
Further details:
XR-type window events are queued to the regular window queues after
updating and interpreting VR action states. An appropriate window is
found by either using the window the VR session was started in or a
fallback option.
When handling XR events, mouse-specific processing is skipped and
instead a dedicated XR offscreen area and region (see 08511b1c3d) is
used to execute XR event operators in the proper context.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D10944
Previously the functions called `hash_float` instead of `uint_to_float_01`.
This meant that the float was hashed twice instead of once.
The new functions are also compatible with Cycles/Eevee.
Differential Revision: https://developer.blender.org/D12832
For fixed pivots, make sure the correct pivot axis is being used.
Also add continues or invalid rotations.
Differential Revision: https://developer.blender.org/D12824
For details see the "Extending the Disney BRDF to a BSDF with Integrated
Subsurface Scattering" paper.
We split the diffuse BSDF into a lambertian and retro-reflection component.
The retro-reflection component is always handled as a BSDF, while the
lambertian component can be replaced by a BSSRDF.
For the BSSRDF case, we compute Fresnel separately at the entry and exit
points, which may have different normals. As the scattering radius decreases
this converges to the BSDF case.
A downside is that this increases noise for subsurface scattering in the
Principled BSDF, due to some samples going to the retro-reflection component.
However the previous logic (also in 2.93) was simple wrong, using a
non-sensical view direction vector at the exit point. We use an importance
sampling weight estimate for the retro-reflection to try to better balance
samples between the BSDF and BSSRDF.
Differential Revision: https://developer.blender.org/D12801
There is not enough time before the release to improve Random Walk to handle
all cases this was used for, so restore it for now.
Since there is no more path splitting in cycles-x, this can increase noise in
non-flat areas for the sample number of samples, though fewer rays will be traced
also. This is fundamentally a trade-off we made in the new design and why Random
Walk is a better fit. However the importance resampling we do now does help to
reduce noise.
Differential Revision: https://developer.blender.org/D12800
This commit implements T91780, adding nodes to get and set builtin
attributes. Individual set nodes are used so that the values can be
exposed for direct editing, which is useful for attributes like shade
smooth and spline resolution. Individual input nodes are used to allow
reusing nodes for multiple components, and to allow grouping multiple
outputs conceptually in the same node in the future.
Input Nodes
- Radius
- Curve Tilt
- Curve Handle Positions
- Is Shade Smooth
- Spline Resolution
- Is Spline Cyclic
'Set' Nodes
- Curve Radius
- Point Radius
- Curve Tilt
- Curve Handle Positions
- Is Shade Smooth
- Spline Resolution
- Is Spline Cyclic
Using hardcoded categories is necessary to add separators to the node
menu.
Differential Revision: https://developer.blender.org/D12687
Delete Geometry:
This adds a copy of the old node in the legacy folder and updates the
node to work with fields. The invert option is removed, because it is
something that should be very easy with fields, and to be consistent
with other nodes which have a selection. There is also a dropdown to
select the domain, because the domain can't be determined from the
field input. When the domain does not belong on any of the components
an info message is displayed.
Separate Geometry:
A more general version of the old Point Separate node. The "inverted"
output is the same as using the delete geometry node.
Differential Revision: https://developer.blender.org/D12574
Only count volume objects after shader optimization.
Allows to discard objects which don't have effective volume
BSDF connected to the shader output (i.e. constant folded,
or non-volume BSDF used by mistake).
Solves memory regression reported in T92014.
There is still possibility to improve memory even further
for cases when there are a lot of non-intersecting volume
objects, but that requires a deeper refactor of update
process. Will happen as a followup development.
Differential Revision: https://developer.blender.org/D12797
This function now takes a depsgraph and a list of objects to avoid
inefficient O(n^2) iteration when extracting instances from all objects
in the scene. Returning an object -> instance map.
Note that keeping compatibility with the existing API wasn't practical
in this case since instances can no longer be generated from the scene
and it's objects.
The longer-term goal is to separate host-only scene update
from device update: make it possible to make kernel features
depend on actual scene state and flags.
This change makes it so shaders are compiled before kernel
load, making checks like "has_volume" available at the
kernel features calculation state.
No functional changes are expected at this point.
Differential Revision: https://developer.blender.org/D12795
In the original code depth=0 meant that there was no parents. But with
BLI_listbase_count we have depth 1 in those cases.
Differential Revision: https://developer.blender.org/D12817
The problem is that the fast triangulator (based on polyfill)
sometimes makes degenerate triangles. Commit 8115f0c5bd91f had
a check for degenerate triangles but it wasn't thorough enough.
This commit uses a more thorough (and pessimistic) test for
degenerate triangles, using the exact triangulator in those cases.
This commit introduces the Align Euler to Vector function node which
rotates to a body into a given direction. The node replaces the legacy
"Align Rotation to Vector" node, which only worked on an attribute
named `rotation` internally. The "Euler" in the name is meant to make
it clearer that the rotation isn't interchangeable with a regular
vector.
Addresses T91374.
Differential Revision: https://developer.blender.org/D12726
Strip was flagged for deletion in `seq_transform_handle_overwrite()`
on `STRIP_OVERLAP_IS_FULL`. Then it is removed in
`SEQ_edit_strip_split()` before it should be.
Handle `STRIP_OVERLAP_IS_FULL` in separate loop.
This may not be complete solution, because in example file overlap is
caused between 2 transformed strips and one that is "static".
Such operation should not be possible in first place. This fixes the
crash at lest, so improvement in behavior can be handled separately.
Differential Revision: https://developer.blender.org/D12751
This was caused by confusing naming of frame overlay feature.
Correct flag to use is `sseq->flag & SEQ_SHOW_OVERLAY`, not
`ed->over_flag & SEQ_EDIT_OVERLAY_SHOW`.
- Fix a typo that used the max instead of the min for the soft max
- Assign the correct "last property type" when the operator starts
- Only check values for the soft range when use soft range is turned on
The context menu is a standard way to expose operations of the clicked
item to the user. They expect it to be there, and we can make use of it
as a place to put more advanced operations in.
The menu contains:
* New Catalog
* Delete Catalog
* Rename
Also removes the 'x' icon to delete a catalog from the right side of a
row. This was just placed there temporarily until the context menu is
there. It's too easy to accidentally delete catalogs with this.
Tree-view items can now easily define their own context menu. This works
by overriding the `ui::AbstractTreeViewItem::build_context_menu()`
function. See the documentation:
https://wiki.blender.org/wiki/Source/Interface/Views#Context_Menus
Consistently with the Outliner and File Browser, the right-clicked item
also gets activated. This makes sure the correct context is set for the
operators and makes it clear to the user which item is operated on.
An operator to rename the active item is also added, which is something
you'd typically want to put in the context menu as well.
Enabling or disabling motion blur requires rebuilding the BVH of affected geometry and
uploading modified vertices to the device (since without motion blur the transform is
applied to the vertex positions, whereas with motion blur this is done during traversal).
Previously neither was happening when persistent data was enabled, since the relevant
node sockets were not tagged as modified after toggling motion blur.
The change to blender_object.cpp makes it so `geom->set_use_motion_blur()` is always
called (regardless of motion blur being toggled on or off), which will tag the geometry
as modified if that value changed and ensures the BVH is updated.
The change to hair.cpp/mesh.cpp was necessary since after motion blur is disabled,
the transform is applied to the vertex positions of a mesh, but those changes were not
uploaded to the device. This is fixed now that they are tagged as modified.
Maniphest Tasks: T90666
Differential Revision: https://developer.blender.org/D12781
Same as SSS this has been rewritten to support varying SSS radius.
Instead of relying on shadowmap hack to improve the transmittance
artifact (previously called translucency) we exposed a min thickness
output that will reduce the maximum of light bleeding that can happen
at the shading point. This is far from perfect but at least it is
tweakable.
The effect is now cheaper and the option to enable it is now gone.
It can always be artificially disabled by making the thickness bigger
than the sss radius.
The effect is always enabled for all SSS surfaces and will even be
applied on forward shaded object (alpha blend mode).
This only adds the output but the output is not yet used.
This thickness output is meant to control the aspect of subsurface,
refraction, absorption and volume shaders.
The value expected is the mean thickness inside the object at the
shading point. The source can be a vertex color or a texture map baked
from a raytracer.
This new implementation follows the technique described in
"Efficient screen space subsurface scattering Siggraph 2018".
Compared to the old implementation it fixes a lot of issues at
the cost of it being slower. This fixes:
- Light leaking between different objects.
- Light leaking between different surfaces with different depths.
- SSS radii are now "texturable" per pixel. No SSS surfaces limits.
- Noise should be lower.
- Precomputation is only done once for all SSS surfaces which lowers the
per material storage and precomputation time.
Implementation is also simpler as it is only a one pass processing.
We differ from the reference presentation by not precomputing the
RGB weights per samples. We actually compute them on the fly in order
to support varying SSS radii.
Notes:
- SSS IOR and SSS anisotropy are not supported.
- Object level light leak prevention might not work for high number of
objects in the scene (> 1024). In this case light leak might occur.
Adding or deleting (hidding) objects in the scene might change which
objects can leak.
This bug was introduced in D12190 because the list of types that support materials did not include GPencil and this caused all materials to be removed after they were created during conversion.
If the operator poll of a superimposed icon returned `false`, the
superimposed icon would just draw normally and fail silently. Instead it
will now be drawn grayed out, plus the tooltip of the icon can show the
usual "disabled hint" (a hint explaining why the button is disabled).
This seems to happen only in a few files, and not so trivial to
reproduce from scratch.
The crash is real though, and this fixes it.
It also fix a wrong comment style that was introduced in the same faulty
commit.
Bug introduced on ebe2374528.
Differential Revision: https://developer.blender.org/D12794
Previously this was only happening when "Load UI" was enabled,
making it difficult for Python script authors to know when
re-registering subscribers was needed.
Only copy required part of volume stack instead of entire stack.
Solves time regression introduced by D12759 and avoids need in
implementing volume stack calculation to exactly match what the
path tracing will do (as well as potentially makes scenes with
a lot of volumes ans a tiny bit of deeply nested ones render
faster).
Still need to look into memory aspect of the regression, but
that is for separate patch.
Ref T92014
Maniphest Tasks: T92014
Differential Revision: https://developer.blender.org/D12790
The breadcrumbs alone may not be enough to indicate that a user is
inside a nodegroup. The original dark green color was a bit overwhelming
but having a different background helps.
This is a follow up to 919e513fa8.
In previous Blender version the tile highlight was stored in the
full frame (un-cropped) space. This was changed with the Cycles X
development and now the tiles and render result are always measured
relative to the cropped region.
Differential Revision: https://developer.blender.org/D12779
In a couple of places in the UI, we show superimposed icons on buttons
to execute an operation (called "Extra Icons" internally). Hovering them
would show the tooltip of the underlying button, which is misleading and
confusing.
There are cases where it's not obvious what an icon does, so a tooltip
would be quite useful here. It's likely we are going to use superimposed
icons in more places in the future, e.g. see D11890.
The extra icon basically acts as an override for the button in the
tooltip code.
Differential Revision: https://developer.blender.org/D11894
Reviewed by: Campbell Barton
Document that `bpy.msgbus.subscribe_rna()`-registered messagebus
subscriptions will be cleared whenever a new blend file is loaded.
Passing `options={'PERSISTENT'}` has no influence on this behaviour.
Disables undo for:
* The tree row collapsing - which doesn't make sense to undo, isn't
supported by the undo system, and just triggers the confirmation
prompt when closing the file.
* Renaming items - While this may make sense in some cases, users of the
tree-view API can explicitly do an undo push. For asset catalogs it's
not supported.
Moved function definitions around so that all members of a class are
next to each other. Previously some functions of one class were sitting
between functions of another class.
No functional changes.
Make the "xform" tool/gizmo available for strip transformations in the
sequencer preview window.
Because of the amount of hacks needed to make the gizmo work nicely with
multiple strips at the same time, it was decided to only show the
translate gizmo when multiple strips are selected.
This is because the transforms with multiple strips would appear buggy
because of our lack of shearing support in the transform system.
There is also currently no way to properly sync the gizmo drawing with
the transform when using multiple strips.
Reviewed By: Richard Antalik, Campbell Barton
Differential Revision: http://developer.blender.org/D12729
While drawing cleared this value (as part of temporary fix from 2009),
this was still being checked until recently.
Remove this value in versioning code.
Also clear unused text space flag.
- Drawing annotations used a deprecated value to detect
if drawing was supported.
- ED_space_sequencer_check_show_strip was checking the preview
image type (which doesn't impact strip display).
Signed-off-by: Campbell Barton <ideasman42@gmail.com>
Move texture nodes to C++ and use new socket declaration
Brick, Checker, Image, Magic and Wave
Differential Revision: https://developer.blender.org/D12778
This caused problems calling screenshot from menu-search
which included the status text in the screenshot.
Now the status text is shown in the global status bar
for any operators called from a screen context.
- Use 2D cursor in the preview space using shortcuts
matching the UV editor and 3D view.
- Add Cursor tool, cursor transform.
- Support for cursor and bound-box pivot.
- Add pivot pie menu.
The current background color and parent nodetrees is too distracting and noisy.
It drastically affect the readability of the nested node-trees.
Other techniques (better bread crumbs) can be used instead to indicate
to users that they are inside a node group.
---
The background drawing was introduced in 4638e5f99a as part of the
Python Nodes branch merge. This made its debut in Blender 2.67
(30/May/2021).
At the time the color used for the background was a light gray. Over the
years the color changed to the current dark green, aggravating the
problem further.
Before that, the (expanded) nodegroup already had the partially
transparent background, mingling with the other nodes. The Python Nodes
branch brought this concept with its changes, and would always draw up
to two levels up in the background (the parent nodetree, and its parent
nodetree).
To read the original inspiration for all the changes introduced then:
https://code.blender.org/2012/01/improving-node-group-interface-editing/
Differential Revision: https://developer.blender.org/D12780
Change the rules for determining where to save a new catalog definition
file (CDF).
Old situation (T91681): if a `blender_assets.cats.txt` file already
exists in the same directory as the blend file, write to that. If not,
see if the blend file is contained in an asset library, and write to its
top-level CDF.
The new situation swaps the rules: first see if the blend file is
contained in an asset library, and if so write to its top-level CDF. If
not, write a CDF next to the blend file.
As before, any pre-existing CDF is not just bluntly overwritten, but
merged with the in-memory catalogs.
sequencer_view_preview_poll returned true even when in the
"Sequence" view.
Now check the preview is visible, also check the region
is expected type so preview actions aren't possible for mixed
sequence/preview display.
The menu to select the active Asset Library is now in the left bar (so called
"Source List", although I'd prefer "Navigation-Bar").
This has some benefits:
* All Asset Library navigation is in the left sidebar now, giving nice grouping
and a top-to-bottom & left-to-right flow of the layout. The header is focused
on view set-up now.
* Catalogs are stored inside the asset library. Makes sense to have them right
under that.
* Less content in the header allows for less wide Asset Browsers without
extensive scrolling.
* This location gives more space to add options or operators for Asset
Libraries.
Main downside I see is that the side-bar needs to be opened to change
libraries, which takes quite some space. In practice there shouldn't be need to
do this often though.
This reworks how tree rows are constructed in the layout and how they
behave in return.
* To open or collapse a row, the triangle/chevron icon has to be clicked
now. The previous behavior of allowing to do it on the entire row, but
only if the item was active already, was just too unusual and felt
weird.
* Reduce margin between chevron icon and the row label.
* Indent child items without chevron some more, otherwise they feel like
a row on the same level as their parent, just without chevron.
* Fix renaming button taking entire row width. Respect indentation now.
* Fix double-clicking to rename toggling collapsed state on each click.
Some hacks/special-handling was needed so tree-rows always highlight
while the mouse is hovering them, even if the mouse is actually hovering
another button inside the row.
`SequencesMeta.new_movie()` API function caused meta strip to change
length. Similar issue has been fixed in transform code by checking
if `MetaStack` exists. `MetaStack` is not used when changing data in
python.
Provide `seqbase` to `SEQ_time_update_sequence()` so the function can
check if change happens inside of meta strip.
This patch also merges `seq_time_update_sequence_bounds()` into
`SEQ_time_update_sequence()`. This is because same issue applies for
both functions and it is confusing to have more time update
functions.re if this will lead anywhere.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D12763
Previously the storage here was optimized to avoid indirections in BVH2
traversal. This helps improve performance a bit, but makes performance
and memory usage of Embree and OptiX BVHs a bit worse also. It also adds
code complexity in other parts of the code.
Now decouple triangle and curve primitive storage from BVH2.
* Reduced peak memory usage on all devices
* Bit better performance for OptiX and Embree
* Bit worse performance for CUDA
* Simplified code:
** Intersection.prim/object now matches ShaderData.prim/object
** No more offset manipulation for mesh displacement before a BVH is built
** Remove primitive packing code and flags for Embree and OptiX
** Curve segments are now stored in a KernelCurve struct
* Also happens to fix a bug in baking with incorrect prim/object
Fixes T91968, T91770, T91902
Differential Revision: https://developer.blender.org/D12766
Was just comparing this item's and the parent item's names. But if an item has
no parents, only its own name has to match for the check to return true. Make
sure that the number of parents also matches.
MSVC does not support variable size array definition.
Use maximum possible stack, similar to the GPU case.
Not expected to have user-measurable difference.
Now the icons to add or delete catalogs are only shown when mouse hovering a
catalog item in the tree. This is convenient for quick creation of catalogs,
and doesn't require activating a catalog to edit it first.
Determining if a tree item is hovered isn't trivial actually. The UI tree-view
code has to find the matching tree-row button in the previous layout to do so,
since the new layout isn't calculated yet.
The UI code to ensure consistent button state over redraws was just comparing
the name of the item, ignoring the parent names. So with multiple items of the
same name, there might have been glitches (didn't see any myself though).
There's a leftover to-do though, we don't check yet if the matched buttons are
actually from the same tree. Added TODO comment.
Make volume stack allocated conditionally, potentially based on the
actual nested level of objects in the scene.
Currently the nested level is estimated by number of volume objects.
This is a non-expensive check which is probably enough in practice
to get almost perfect memory usage and performance.
The conditional allocation is a bit tricky.
For the CPU we declare and define maximum possible volume stack,
because there are only that many integrator states on the CPU.
On the GPU we declare outer SoA to have all volume stack elements,
but only allocate actually needed ones. The actually used volume
stack size is passed as a pre-processor, which seems to be easiest
and fastest for the GPU state copy.
There seems to be no speed regression in the demo files on RTX6000.
Note that scenes with high nested level of volume will now be slower
but correct.
Differential Revision: https://developer.blender.org/D12759
This ended up being a copy of:
`toolsettings->workspace_tool_type == SCE_WORKSPACE_TOOL_FALLBACK`
requiring boiler plate assignment in gizmos refresh callbacks.
Remove this struct member and check `toolsettings->workspace_tool_type`
directly, since so far there has been no advantage in gizmo-groups
being able to control this themselves.
Resolve regression in c9d9bfa84a,
which added support for tools to be tagged as using a fallback too.
In these cases the "Active Tool" setting was ignored and the fallback
tool would be used (the spin tool would box select for example).
Catalogs can now be renamed by double clicking them in the Asset
Browser. This is mostly done through the tree-view API, the asset
specific code is very little.
There is some polish left to be done here, e.g. the double click
currently also collapses/uncollapses and activates the clicked item. And
the rename button takes the full width of the row. But addressing these
is better done as part of some other behavioral changes that are planned
anyway.
It's unclear why this code was added in the first place, but it seems
unnecessary, it can be restored if we find this breaks something.
The Embree docs mention that the same primitive may be hit multiple times, but
my understanding is that about e.g. curves where both the frontside and backside
may be hit. However those hits would be at different distances.
The context for this change is that we want to add an optimization where we
can immediately update throughput for transparent shadows instead of recording
intersections, and avoid duplicate would require extra work. However there is
an Embree example that does something similar without worrying about duplicate
hits either.
Makes things look more appealing visually. Plus it's a way to visually
group the tree rows together, which can be important if there are more
widgets surrounding the tree.
Liboverride references need a special handling during append, since
those pointers should never be made local, nor reampped to newly
localized data. And liboverride references should never be directly made
local either, to ensure their liboverride usages remain pointing to
linked data and not local one.
Issue was reported by the studio, and also probably as part of T91892.
If a renaming button was removed via `UI_but_active_only_ex()` and that
button was placed using the layout system, the button was still in the
layout.
So far this didn't cause issues, because all cases where the button may
be removed were not using the layout system.
Fixes:{T91064}
Caused by {rBcd118c5581f482afc8554ff88b5b6f3b552b1682}
- Applies `ensure_valid_reflection()` to the normal input on all BSDFs for CPU and GPU.
- This doesn't affect hair.
- Removes `ensure_valid_reflection()` from the output of Bump Map and Normal Map nodes for CPU/GPU as it is not needed.
- The fix doesn't touch OSL.
Reviewed By: brecht, leesonw
Maniphest Tasks: T91064
Differential Revision: https://developer.blender.org/D12403
- Support toggle/deselect/deselect_all options
(matching 3D viewport object selection).
- Support legacy selection behavior.
- Support selecting by the center in preview views (holding Ctrl).
Re-order common sequencer key-map to be at the top level
(shared by preview and sequence view).
Without this sequencer tools would be displayed at different levels
in the hierarchy which is confusing and doesn't represent the separation
between "Sequencer" and "SequencerPreview" key-maps.
Sequencer poll was succeeding outside of a preview region.
This meant it couldn't be used in tool key maps which are currently
shared between preview & sequencer regions.
Free strip `anim` data immediately after rendering. This doesn't affect
rendering performance, because each new loop would have to seek to start
of strip. Also strips are now freed anyway, but after rendering loop
ends.
With SF edit file, thumbnail rendering used around 60GB of memory.
Now it uses few hundreds MB (depends on movie file resolution, codec,
etc.)
Freeing of strips caused UI to be unresponsive for brief period. This
issue is not removed, but is more spread out so it is less noticable.
This effectively undoes some of the following commit:
rB4537e8558468c71a03bf53f59c60f888b3412de2
The tables in question were duplicated 5-6 times into the blender
executable due to the headers being used in multiple translation units.
This contributes ~6.3kb worth of duplicate data into the binary.
Some further details are in the below revision.
Differential Revision: https://developer.blender.org/D12724
Some software may export velocity as a different type than 3D vectors
(e.g. as colors or flat arrays or floats), so we need to explicitely
check for this.
A more robust attribute handling system allowing us to cope with other
software idiosyncrasies is on the way, so this fix will do for now.
This didn't belong on blenlib since it uses DNA data types
and included a bad-level call to BKE_curve.h.
It also meant linking in blenlib would depend on the freetype library,
noticeable for thumbnail extraction (see D6408).
The long term goal is completely removing DerivedMesh, and these
functions are making some refactoring of mesh normals (T91186) more
complicated. They are not used anywhere.
Previously we would only free animation strip data when doing final
renders. If not doing a final render or simply just playing back videos
in the VSE, we would not free decoders or non VSE cache data from the
strips.
This would lead to memory usage exploding in complex VSE scenes.
Now we instead use the dumb apporach of freeing everything that is not
currently visible.
The Paint operator only works in SPACE_VIEW3D and this is checked in the poll mtehod, so it's not logic check again.
These checkings were part of the old grease pencil but it was not removed.
This is required for Cycles to report a meaningful error message when it fails to load a PTX module
created with a newer CUDA toolkit version than the driver supports.
Ref T91879
Implement an overscan support for tiles, so that adaptive sampling can
rely on the pixels neighbourhood.
Differential Revision: https://developer.blender.org/D12599
Issue was that the `on_activate()` callback of tree-items were
continuously called, because the active-state was queried before we
fully reconstructed the tree and its state from the previous redraw.
Such issues could happen in more places, so I've refactored the API a
bit to reflect the requirements for state queries, and include some
sanity checks.
The actual fix for the issue is to delay the state change until the tree
is fully reconstructed, by letting the tree-items pass a callback to
check if they should be active.
The `ui::BasicTreeViewItem` took a function-like object to execute on
item activation via the constructor. This was mainly intended to be used
with lambdas. However, it's confusing to just have this lambda there,
with no indication of what it's for (activation).
Instead, assign the function-like object via an explicit `on_activate()`
function.
Currently was only used for logging, but better to fix the size so
that it matches reality.
The issue was caused by decoupling number of shadow intersections
and using much higher number for CPU. This caused the total state
on GPU to be logged as 10s of gigabytes instead of 100s of megabytes.
Differential Revision: https://developer.blender.org/D12755
No functional change, just cleaning up the shader code a bit.
Part of this is removing dead code (the discard was never called), and
part is shuffling mix/max around based on feedback by Sybren Stüvel.
For example, crash when attempting to use OptiX denoiser on systems
without OptiX-capable device.
Perform check that scene update happened without errors.
Note that `et_error` makes progress to cancel, so the code was
simplified a bit.
This was simply never handled apparently.
Also fixes a regression from recent append refactor that prevented RB
objects to to properly handled too (since we instantiate loose objects
in append step now, we need to handle RigidBody ones after that
instantiation stage, otherwise nothing will happen since loose objects
won't be in any scene).
Issue is that test cases re-uses draw manager. The new
`DRWRegisteredDrawEngine` struct is only freed when a
valid opengl context was found. what isn't the case
when running test cases.
Also made sure that re-using draw manager would use re-inited
values.
This is a necessary step for EEVEE's new arch. This moves more data
to the draw manager. This makes it easier to have the render or draw
engines manage their own data.
This makes more sense and cleans-up what the GPUViewport holds
Also rewrites the Texture pool manager to be in C++.
This also move the DefaultFramebuffer/TextureList and the engine related
data to a new `DRWViewData` struct. This struct manages the per view
(as in stereo view) engine data.
There is a bit of cleanup in the way the draw manager is setup.
We now use a temporary DRWData instead of creating a dummy viewport.
Development: fclem, jbakker
Differential Revision: https://developer.blender.org/D11966
This adds an offscreen View3D window area for the VR view in order to
execute XR events/operators in the proper context. The area is created
as runtime data before XR events are dispatched and set as the active
area during XR event handling.
Since the area is runtime-only, it will not be saved in files and since
the area is offscreen, it will not interfere with regular window areas.
The area is removed with the rest of the XR runtime data on exit, file
read, or when stopping the VR session.
Note: This also adds internal types (EVT_DATA_XR, EVT_XR_ACTION) and
structs (wmXrActionData) for XR events.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D12472
Rename the "String Join" node to "Join Strings" to
go with the verb first naming convention.
Differential Revision: https://developer.blender.org/D12678
Following operators now only report messages back when they are called via their invoke-methods:
- ANIM_OT_keyframe_insert
- ANIM_OT_keyframe_insert_by_name
- ANIM_OT_keyframe_insert_menu
- ANIM_OT_keyframe_delete
- ANIM_OT_keyframe_clear_v3d
- ANIM_OT_keyframe_delete_v3d
Also removed the attribute confirm_success from the following operators:
- ANIM_OT_keyframe_insert
- ANIM_OT_keyframe_insert_by_name
- ANIM_OT_keyframe_insert_menu
- ANIM_OT_keyframe_delete
- ANIM_OT_keyframe_delete_by_name
Note: addons/scripts possibly need to be updated if they use the above operators AND set the "confirm_success" attribute
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12697
The asset catalog design was always that the active catalog would also
display all assets of its child catalogs (or grand-childs, etc.). This
is one of the main characteristics that differentiates catalogs from
usual directories.
Sybren prepared this on the asset catalog backend side with
56ce51d1f7. This integrates it into the Asset Browser backend and the
UI.
Fix the selection logic on the Handle Type Selection node to work
as intended:
(Left is Selected AND Left is ChosenType)
OR
(Right is Selected AND Right is ChosenType)
This update allows the Trim Curve node to use float field inputs
for the start and end inputs. These fields are evaluated on the
spline domain.
Differential Revision: https://developer.blender.org/D12744
Makes sure that the active item of a tree never has collapsed parent
items, which can be confusing if it happens. E.g. for the asset catalogs
UI, the active catalog decides which assets are visible. Having it
hidden while being the main factor deciding which assets are visible is
quite confusing.
I think it makes sense to have this at the UI Tree-View level, rather
than doing it manually in the asset catalog code for example. Seems like
something you'd commonly want. We can make it optional in the API if
needed.
Renamed the `set_active()` function to make clear that it is more than a
mere setter.
See T91826, there is a bug in the code where both `.` and `_` are used as a seperator for `BLI_uniquename_cb`.
This resulted in some nodes becoming disconnected on file load.
Until this is resolved, the chnages are reverted to prevent data loss.
Dragging assets onto the "Unassigned" catalog tree item will effectively
move the assets out of any catalog. Technically this means unsetting the
Catalog-ID stored in the asset metadata, or more precisely setting the
UUID to be all zeros.
Introduced by fc7beac8d6. During code review it wasn't clear why this
branch was needed, so we removed it. Now it is clear why it is needed
so we added it back and added a comment why the branch is needed.
Patch provided by @Severin.
Always sample background pass behind shadow catcher (if the pass
exists, of course), regardless of whether shadow catcher will be
used as approximate or accurate.
Allows to combine accurate shadows into an environment map.
Differential Revision: https://developer.blender.org/D12747
{F10761402}
With active viewport render from camera view, the camera border shows up, even when passepartout and overlays are disabled.
By moving the line-drawing code to the passepartout section, it is effectively disabled when passepartout is off.
Reviewed By: sebastian_k
Differential Revision: https://developer.blender.org/D12745
Because of legacy reasons (C string compare function returning 0 when
strings are equal), the ghash compare function is expected to return
false when hashes are equal.
This patch fixes a crash that was recently introduced by rB5cebcb415e76.
The reason were missing poll functions in the UI and operator.
Reviewed By: ISS
Maniphest Tasks: T91873
Differential Revision: https://developer.blender.org/D12736
Without this, each cppcheck invocation included all defines/includes
flooding the console with unhelpful information.
Also remove nonexistent directory to exclude.
queue_processes() - used for some of the "make check_*" utilities,
wasn't waiting for all jobs to finish before returning.
This conflicted with running cleanup operations.
Somehow, the file from T71329 has an empty curve profile. While that may
be a problem in itself, it's reasonable to avoid asserts or crashes when
loading or drawing such a CurveProfile. This commit just makes sure the
table always has a single vertex, and adds some checks in drawing code.
With this it is possible to select any number of assets in the Asset
Browser and drag them into catalogs. The assets will be moved to that
catalog then. However, this will only work in the "Current File" asset
library, since that is the only library that allows changing assets,
which is what's done here.
While dragging assets over the tree row, a tooltip is shown explaining
what's going to happen.
In preparation to this, the new UI tree-view API was already extended
with custom drop support, see 4ee2d9df42.
----
Changes here to the `wmDrag` code were needed to support dragging multiple
assets. Some of it is considered temporary because a) a proper #AssetHandle
design should replace some ugly parts of this patch and b) the multi-item
support in `wmDrag` isn't that great yet. The entire API will have to be
written anyway (see D4071).
Maniphest Tasks: T91573
Differential Revision: https://developer.blender.org/D12713
Reviewed by: Sybren Stüvel
This node creates a boolean field selection of bezier spline points
that have a handle of the given type on the selected 'side' of the
contol point. This is evaluated on the point domain.
Differential Revision: https://developer.blender.org/D12559
A previous commit, c56526d8b6, which sometimes didn't drop offsets
into 'in plane' faces, as a fix to T71329, was overly aggressive.
If all the intermediate edges are in the same plane then it is fine
to just put the meeting point on the plane of the start and end edges.
This is very similar to rBa812fe8ceb75fd2b.
This time the number of symbols decreases further from 1335 to 928.
Compile time of the distribute node decreases from ~2.4s to ~2.3s.
The new socket declaration api generates a surprising amount
of symbols in each translation unit where it is used. This resulted
in a measurable compile time increase.
This commit reduces the number of symbols that are generated in
each translation unit significantly. For example, in
`node_geo_distribute_points_on_faces.cc` the number of symbols
decreased from 1930 to 1335. In my tests, this results in a 5-20%
compile time speedup when this and similar files are compiled
in isolation (measured by executing the command in `compile_commands.json`).
Compiling the distribute points on faces node sped up from ~2.65s to ~2.4s.
This update of the Points to Volume node allows a field to populate the
radius input of the node and removes the implicit realization of
instances.
Differential Revision: https://developer.blender.org/D12531
This update of the Resample Curve node allows a field to populate the
count or length input of the node depending on the current mode. The
field is evaluated on the spline domain.
Differential Revision: https://developer.blender.org/D12735
I've seen requests to remove this or complaints about this error message
quite frequently. In lots of production files it's just always going off.
It's not an actionable warning, and since "slow" is relative, it isn't
always even correct.
Differential Revision: https://developer.blender.org/D12694
This commit introduces the Rotate Euler function node which modifies
an input euler rotation. The node replaces the "Point Rotate" node.
Addresses T91375.
Differential Revision: https://developer.blender.org/D12531
This update of the Switch node allows for field compatible types
to be switched through the node. This includes the following:
Float, Int, Bool, String, Vector, and Color
The remaining types are processed with the orginal code:
Geometry, Object, Collection, Texture, and Material
Because the old types require a diffent "switch" socket than the
field types, versioning for old files is included to move links
of those types to a new switch socket. Once fields of other types
are supported, this node can be updated to support them as well.
Differential Revision: https://developer.blender.org/D12642
This commit extends the 'Cone' and 'Cylinder' mesh primitive nodes,
with two inputs to control the segments along the side and in the fill.
This makes the nodes more flexible and brings them more in line with
the improved cube node.
Differential Revision: https://developer.blender.org/D12463
This update of the Set Handle Type node allows for a bool field to be
used as the selection of the affected control point handles for
bezier splines. If no bezier splines are provided a info message is
shown.
Differential Revision: https://developer.blender.org/D12526
This update of the Set Spline Type node allows for a bool field to be
used as the selection of the affected splines.
Differential Revision: https://developer.blender.org/D12522
The Spline Length Input node provides a field containing the
length of the current evaluated spline to the Point and Spline
domains.
Differential Revision: https://developer.blender.org/D12706
Add read-only access to the active catalog ID via
`context.space_data.params.catalog_id` in the Asset Browser context.
The UUID is exposed as string to Python.
The curve subdivide node can now take an int field to specify the
number of subdivisions to make at each curve segment.
Reviewed by: Hans Goudey
Differential Revision: https://developer.blender.org/D12534
Enable sorting motion tracking tracks by start / end times.
Help identifying what cases reconstructed camera jumps, based
on information about whether any track starts/ends at the frame.
Based on revision eb0eb54d96.
{F10563305}
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D12621
Always create an `AssetCatalogTree` in the `AssetCatalogService`. This
ensures that newly-created catalogs are immediately visible in the UI
(because they insert themselves into an already-existing tree).
Given an "active catalog" (i.e. the one selected in the UI), construct
an `AssetCatalogFilter` instance. This filter can determine whether an
asset should be shown or not. It returns `true` when The asset's catalog
ID is:
- the active catalog,
- an alias of the active catalog (so different UUID that maps to the
same path),
- a sub-catalog of the active catalog.
Not yet hooked up to the UI.
The use case for this method is quite obscure and difficult to
understand without an example. Despite how big looks, this is
actually the simplest example that makes sense.
This fixes T91828.
The current value of `GL_PACK_ALIGNMENT` may result in crash in the `gpu` module if the buffer is not aligned.
Differential Revision: https://developer.blender.org/D12720
Copy/Paste uses its own code path for ID linking, which was not setting
`LIB_TAG_DOIT` for proper instantiation later on.
Would be nice the make this logic closer to the rest of the link/append
code at some point, but for now this fix will do.
No idea why this was done that way (it originate from initial paste
commit, rB12b642062c6f).
But the IDs 'selected' as direct paste in `BLO_library_link_copypaste`
should be 'directly' linked, it's similar case to actual append of
selected IDs by the user.
Related to T87189.
This refactors and fixes the code that propagates socket types
through reroute nodes. In my tests it is faster than the previous
code. The difference becomes larger the more reroute nodes
there are, because the old code had O(n^2) runtime, while the
new code runs in linear time.
Differential Revision: https://developer.blender.org/D12716
Add asset catalogs test, to ensure missing catalogs are only created once,
and not for every originally defined catalog.
No functional changes to Blender (the code was already doing the right
thing).
The node was setting a warning when used with instances on input,
even though it worked fine.
Differential Revision: https://developer.blender.org/D12718
Alpha input was not receiving the final composite canvas
as preferred causing a Translate operation being inserted
for centering. This resulted in a transparent background.
The issue only affects Full Frame mode.
This patch is created to change the tooltip for Slip Strip Contents
As per the present info, only active strip will be affected.
But in reality selected strips can be trimmed with this operator.
Word Trim changed to Slip in tooltip
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12450
Add Offset/Slope/Power controls to the color balance modifier. This is
already available in compositor.
Reviewed By: sergey, ISS
Differential Revision: https://developer.blender.org/D12575
* Add OutputDriver, replacing function callbacks in Session.
* Add PathTraceTile, replacing tile access methods in Session.
* Add more detailed comments about how this driver should be implemented.
* Add OIIOOutputDriver for Cycles standalone to output an image.
Differential Revision: https://developer.blender.org/D12627
* Split GPUDisplay into two classes. PathTraceDisplay to implement the Cycles side,
and DisplayDriver to implement the host application side. The DisplayDriver is now
a fully abstract base class, embedded in the PathTraceDisplay.
* Move copy_pixels_to_texture implementation out of the host side into the Cycles side,
since it can be implemented in terms of the texture buffer mapping.
* Move definition of DeviceGraphicsInteropDestination into display driver header, so
that we do not need to expose private device headers in the public API.
* Add more detailed comments about how the DisplayDriver should be implemented.
The "driver" terminology might not be obvious, but is also used in other renderers.
Differential Revision: https://developer.blender.org/D12626
`BKE_mesh_boundbox_get` cannot be called for objects of type Curve.
The BoundBox however does not match the object seen in the scene.
This will be dealt with in another commit.
For every known catalog, ensure its parent catalog also exists. This
ensures that assets can be assigned to parent catalogs, even when they
didn't exist in the Catalog Definition File yet.
Would happen when there were multiple drag items in parallel. There was
a listbase constructed with twice the same item, even though that item
would be deleted after it was handled the first time.
Adds an easy way to add drop support for tree-view rows.
Most of the work is handled by the tree-view UI code. The tree items can
simply override a few functions (`can_drop()`, `on_drop()`,
`drop_tooltip()`) to implement their custom drop behavior.
While dragging over a tree-view item that can be dropped into/onto, the
item can show a custom and dynamic tooltip explaining what's gonna
happen on drop.
This isn't used yet, but will soon be for asset catalogs.
See documentation here:
https://wiki.blender.org/wiki/Source/Interface/Views#Further_Customizations
The `CatalogPath` name was an alias for `std::string`, so that it could
be easily switched over to something else. This happened in the previous
commit (switched to `AssetCatalogPath`), so the alias is no longer
necessary.
This commit removes the `CatalogPath` alias.
No functional changes.
So far we have used `std::string` for asset catalog paths. Some
operations are better described on a dedicated class for this, though.
This commits switches catalog paths from using `std::string` to a
dedicated `blender::bke::AssetCatalogPath` class.
The `using CatalogPath = AssetCatalogPath` alias is still there, and
will be removed in a following cleanup commit.
New `AssetCatalogPath` code reviewed by @severin in D12710.
Patch created by Pablo Vazquez
This change darkens the header area a bit to create more contrast with the texts.
Differential Revision: https://developer.blender.org/D12711
Handling of RigidBody data in duplicate of scenes/collections was very
wrong. This commit:
- Add handling of duplication of RB collections when fully duplicating
a scene.
- Fix Object duplication trying to add duplicated RB objects to
matching RBW collections.
While the later behavior is desired when only duplicated objects, when
duplicating their collections and/or scenes it is actually very bad, as
it would add back new object duplicates to old (RBW) collections.
If the "Current File" asset library is selected in the Asset Browser,
now asssets are filtered based on the active asset catalog. Previously
it would just show all assets. This was marked as a TODO in the code
already.
Maniphest Task: https://developer.blender.org/T91820
Passing multiple UDIM arguments into the packing function
is awkward especially since the caller may not be using UDIM.
Use an argument to store UDIM packing parameters which can be NULL,
which operates without any UDIM support.
Add a function that extracts these parameters out of the image space
allowing for multiple functions to take UDIM parameters in the future.
This is caused by line art loading curve objects twice from curve and converted mesh instances (when instance option is on). Now only load mesh when instance option is on.
This patch increases the size of the Area BORDERPADDING a bit to make
it easier to hit the edges when initiating area resizing.
See D11925 for details and examples.
Differential Revision: https://developer.blender.org/D11925
Reviewed by Campbell Barton
This commit exposes left and right bezier handles as an attribute.
Interaction basically works like edit mode. If you move an aligned
handle, it also moves the opposite handle of the control point.
The difference is that you can't edit "Auto" or "Vector" handles,
you have to first use the "Set Handle Type" node. That gives the handle
types a bit more meaning in the node tree-- changing them in edit mod
is more like a "UI override".
The attributes are named `handle_start` and `handle_end`,
which is the same name used in the curve RNA API.
A new virtual array implementation is added which handles the case of
splines that don't have these attributes, and it also calls two new
functions on `BezierSpline` to set the handle position accounting
for aligned handles.
The virtual arrays and attribute providers will be refactored
(probably templated) in the future, as a next step after the last
built-in curve attribute provider has landed.
Differential Revision: https://developer.blender.org/D12005
Without proper RNA paths, Alt-click editing properties on multiple
selected objects doesn not work (as well as the 'Copy To Selected'
operator).
Fixes T91806.
Maniphest Tasks: T91806
Differential Revision: https://developer.blender.org/D12700
This diff disables tests for Boolean, subdivision surface and volume
when GMP, Opensubdiv and Openvdb are not compiled respectively.
It also changes the existing file structure and adds sub-folders for
boolean and subdivison tests. The volume folder only has one test and
is as unchanged structure-wise.
Reviewed By: JacquesLucke, LazyDodo
Differential Revision: https://developer.blender.org/D12448
Similar to the previous change in the area: need to avoid ray
point and direction becoming a non-finite value.
Use the view direction when the geometrical normal can not be
calculated.
Collaboration and sanity inspiration with Brecht!
Differential Revision: https://developer.blender.org/D12703
This makes asset view templates, e.g. as used by the Pose Library add-on
use recursive asset loading, see
Also works around an issue that made assets not show up at all anymore
since fc7beac8d6. I'm creating a separate report for that regression,
but in the Asset Browser and Viewer it shouldn't be apparent currently.
Was using `NAME_MAX` which is defined in `limits.h`, which again may be
implicitly included by the compiler. Intend was to use the Blender
define `MAX_NAME`.
The Asset Browser now displays a tree with asset catalogs in the left
sidebar.
This replaces the asset categories. It uses the new UI tree-view API
(https://wiki.blender.org/wiki/Source/Interface/Views#Tree-View).
Buttons are displayed for adding and removing of catalogs. Parent items
can be collapsed, but the collapsed/uncollapsed state is not stored in
files yet.
Note that edits to catalogs (e.g. new or removed catalogs) are only
written to the asset library's catalog definition files when saving a
.blend.
In the "Current File" asset library, we try to show asset catalogs from
a parent asset library, or if that fails, from the directory the file is
stored in. See adaf4f56e1.
There are plenty of TODOs and smaller glitches to be fixed still. Plus a
UI polishing pass should be done.
Important missing UI features:
* Dragging assets into catalogs (WIP, close to being ready).
* Renaming catalogs
* Proper handling of catalogs in the "Current File" asset library
(currently not working well).
The "Current File" asset library is especially limited still. Since this
is the only place where you can assign assets to a catalog, this makes
the catalogs very cumbersome in general. To assign an asset to a
catalog, one has to manually copy the Catalog ID (a random hash like
number) to the asset metadata through a temporary UI in the Asset
Browser Sidebar. These limitations should be addressed over the next few
days, they are high priority.
Differential Revision: https://developer.blender.org/D12670
Link/append code needs proper access to scene/view3d data to handle
collections/objects instantiation.
Note that this is a temporary hack more than a proper fix, which would require
a deeper redesign of drag&drop code.
Also note that this will not handle 'properly' (i.e. as user would
expect it) cases like implicitely appended parent objects, in that only
the explicitely appended object will be dropped to the nes location, the
others will remain at their original coordinates.
Differential Revision: https://developer.blender.org/D12696
The issue was caused by hair shader setup setting normal to a non
finite value, which then gets used to create a ray with non-finite
direction, making BVH traversal to run out of stack memory.
Happens with 150_0040_A.lighting.blend frame 112 of the Sprites
project.
Differential Revision: https://developer.blender.org/D12692
Introduce a new keymap preference to navigate into folders by clicking on them once instead of twice.
Makes browsing folders faster albeit non-standard, so keeping this off by default for now.
Does not affect Industry Compatible or other keymaps.
It is still the possible to right-click to open context menu, hold Ctrl or Shift to select multiple items:
{F10651030, size=full}
----
Keymap preference:
{F10652759, size=full}
Part of T91537
Reviewed By: fsiddi, campbellbarton
Differential Revision: https://developer.blender.org/D12667
Caused by {rB3e5431fdf439}
Issue is that sculpting could start with using `SCULPT_smooth` and
(because of the Pressure sensitivity dropping to zero) code would switch
to `SCULPT_enhance_details_brush` at strength zero.
Issue with this though is that this can be in the middle or end of a
stroke and the necessary `ss->cache->detail_directions` are only
initialized for the first brush step (see
`SCULPT_stroke_is_first_brush_step` in `SCULPT_enhance_details_brush`).
With these missing, it could only go downhill from there.
Suggest to prevent the "mode-flip" from `SCULPT_smooth` to
`SCULPT_enhance_details_brush` (happening solely because of pressure
strength) by changing the condition.
Now do `SCULPT_enhance_details_brush` only if strength is **below** zero
and `SCULPT_smooth` else (flipping from enhance_details to regular smooth
is fine).
If inverting the brush in the middle of the stroke will be supported at
some point, the codepath of `smooth` would have to inform the cache that
invert changed and detail_directions would have to be initialized then
(even if not at the start of the stroke).
Maniphest Tasks: T89164
Differential Revision: https://developer.blender.org/D12676
Texts in Outliner dont activate on selecting (Text Editor did not change
to selected text) which is a bit inconsistent to other ID types.
ref T90862
Maniphest Tasks: T90862
Differential Revision: https://developer.blender.org/D12412
With 794c2828af & f48a4aa0f9 it's possible to reuse possibly
expensive, nested data of a data-block when appending. E.g. the
texture of a material, or the mesh of an object. Without this it's easy
to bloat memory and the file size. Duplicated textures also cause
unnecessary shader recompilations.
The feature was intended to be the new default behavior for the Asset
Browser, but it wasn't actually added to the UI yet. This patch adds a
new import type option to the Asset Browser. So from the menu in the
header, you can now choose between:
* Link
* Append
* Append (Reuse Data)
The latter is the new default.
Maniphest Task: https://developer.blender.org/T91741
Differential Revision: https://developer.blender.org/D12647
Reviewed by: Sybren Stüvel, Bastien Montagne
This patch adds color tags to VSE strips, an overlay option to toggle the colors
on and off, a section in the theme settings to define the 9 possible colors and
two ways of changing the color tag through the UI. You can change the color
through the right-click context menu, or in the strip side panel next to the
strip name.
Color tags are defined in user preferences and they can be disabled in overlay
settings.
Reviewed By: campbellbarton, ISS
Differential Revision: https://developer.blender.org/D12405
Avoids possible numerical issues in the path tracing kernel, which
is most important for displacement as non-finite values in BVH can
lead to infinite node recursion during traversal.
Differential Revision: https://developer.blender.org/D12690
Noticed while looking into flickering issues in viewport.
Doesn't seem to solve the flicker issue for me, but is something
what is supposed to be happening anyway.
Differential Revision: https://developer.blender.org/D12673
When the Asset Browser shows the "Current File" asset library, now it
also attempts to load an asset catalog definition file from location of
the current .blend file. This happens as follows:
* First, see if the file is inside of an asset library that is "mounted" in the
Preferences. Load the catalogs from there if so.
* Otherwise, if the file is saved, load the catalogs from the directory the
file is saved in.
* If the file is not saved, no catalogs will be loaded.
Unit tests are being worked on in D12689.
Creating catalogs from the "Current File" asset library still doesn't work, as
the asset catalog service doesn't construct an in-memory catalog definition
file in that case yet.
Differential Revision: https://developer.blender.org/D12675
The issues:
1.) When we want to remove keyframes from a range of frames in an
action,
then we can use bpy.ops.anim.keyframe_delete_v3d to remove the keys
frame by frame. However, whenever the operator hits a frame with no
keyframes, then it generates an error. While when it hits a frame
with keyframes, then it reports the numbner of removed keys.
This creates a lot of unnecessary noise in the Blender console.
2.) Furthermore a related issue is that WM_event_add_notifier() is
called also when no frames where removed. This seems to significantly
slow down the removal of keyframes in a range of frames at least
when i use vscode for debugging.
A proposal for improvement:
This patch adds an attribute 'confirm_success' which controls
if the operator reports back what it did (or did not) while
executing. Silent mode would then be called like this:
bpy.ops.anim.keyframe_delete_v3d(confirm_success=False)
Note: confirm_success is True by default so this patchj does not
change the behavior of Blender, it only gives the option to scripts.
3.) Personal note:
I have chosen the attribute name to be equal as it is used
in other related operators. However i rather would rename the
attribute to "verbose" (preferred) or "with_confirm". But i let this
to be decided by the reviewers. Thanks for your time to review!
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12629
Swap the tool-header and header order so the tool-header
so the header is always next to the window edge.
Note that files saved in 3.0 will have overlapping headers when opened
in any version of Blender before this commit.
Reviewed By: Severin, fsiddi
Maniphest Tasks: T91536
Ref D12631
This was caused by the StructArrayBuffer wrapper not being tagged as NonMovable.
The UBO was in fact being freed at creation time in debug build, but the
pointer was kept as valid in the copied wrapper.
Changing the higher level structure to not use the copy constructor to avoid this.
The issue was that the `GeometrySet` that comes from the modifier does
not have full ownership of the mesh for legacy reasons to avoid copies.
Calling `ensure_owns_direct_data` makes sure that the geometry set
actually owns the geometry so that it can be instanced.
For consistency with other nodes, we also want to process
all instances in the Points input independently. This allows
for more efficient instancing of many objects but also leads
to nested instancing. All instances are processed in their
local space, so that instances don't have to be realized.
Differential Revision: https://developer.blender.org/D12660
Some cases were not covered by the original doversion in
4a0ddeb62b. For now we make it always change the wire color regardless
of whether it was changed before or not.
This do a subversion bump.
Implements T78397
Extends the functionality of pack islands operator to allow packing UVs
to either the closest or active UDIM tile.
This provides 2 new options for packing UVs :
* Closest UDIM: Selected UVs will be packed to the UDIM tile they were
placed on. If not present on a valid UDIM tile, the UVs will be packed
to the closest UDIM in UV space
* Active UDIM: Selected UVs will be packed to the active UDIM image tile
In case, no image is present in the UV editor, then UVs will be packed
to the tile on the UDIM grid where the 2D cursor is located.
Reviewed By: campbellbarton
Maniphest Tasks: T78397
Ref D12680
Implements T89789, T89792, custom grid (described as dynamic grid in
T78389) and UV grid snapping (T78391)
Replaces the default UV editor grid with 2 new types of grid :
* Custom grid: Allows the user to create an NxN grid, where the value
of N is specified by the user.
* Subdividing grid: Subdivides the UV editor grid when the user
zooms in the viewport and vice versa when zooming out.
UV snapping improvements :
* Increment snapping: Increment values for snapping are calculated based
on which grid type is being used in the UV editor
(subdividing or custom). In general the increment value is equal to
the distance between 2 visible grid lines.
* Absolute grid snap: New toggle added to increment snapping option in
the UV editor, allows UV grid snapping during translation.
Reviewed By: campbellbarton
Ref D12684
This was reported for the Outliner.
It was possible to set 'show_locked_time' on any space (via python, not
sure if there are other ways to achieve this).
Navigating in an animation editor obviously ruined the layout in certain
Editors that are not made for this.
Now restrict syncing to editors that support it well (the ones that have
this setting exposed in their menus) and prevent setting this in RNA.
Maniphest Tasks: T91237
Differential Revision: https://developer.blender.org/D12512
- Instead of making the enum expanded leave it in menu form.
- Use full words instead of letters.
Differential Revision: https://developer.blender.org/D12686
Add a fields-aware implementation of the attribute proximity node.
The Source position is an implicit position field, but can be
connected with a position input node with alterations before use.
The target input and mode function the same as the original node.
Patch by Johnny Matthews with edits from Hans Goudey (@HooglyBoogly).
Differential Revision: https://developer.blender.org/D12635
This commit adds functionality for operations that require pixel
translation or resizing on "Full Frame" mode, allowing to adjust
their canvas. It fixes most cropping issues in translate, scale,
rotate and transform nodes by adjusting their canvas to the result,
instead of the input canvas.
Operations output buffer is still always on (0,0) position for
easier image algorithm implementation, even when the
canvas is not.
Current limitations (will be addressed on bcon2):
- Displayed translation in Viewer node is limited to 6000px.
- When scaling up the canvas size is limited to the
scene resolution size x 1.5 . From that point it crops.
If none of these limitations are hit, the Viewer node displays
the full input with any translation.
Differential Revision: https://developer.blender.org/D12466
This is a code refactor in preparation of supporting canvas
compositing. See {D12466}.
No functional changes, all canvases are at (0,0) position matching
tiled implementation.
Differential Revision: https://developer.blender.org/D12465
Sometimes the `use_partial_connect` option could trigger the assert:
```
BLI_assert(!BM_elem_flag_test(l_iter->v, VERT_NOT_IN_STACK));
```
This can happen when `v_delimit->e` is not part of edgenet, so `v_other` will not have the flag.
- Many cleanups of to use list base
- Some variable changes
These change is needed to migrate to the new socket builder API
Reviewed By: manzanilla
Differential Revision: https://developer.blender.org/D12366
The updated version has a selection input as a field
and does not realize instances implicitly.
Differential Revision: https://developer.blender.org/D12506
This enables fields as the official workflow for geometry nodes.
While many features are converted to use fields rather than the old
attribute workflow, many are not yet converted. In that case, the
unconverted nodes are still accessible with an experimental option.
In the coming weeks the rest of the nodes will be converted.
Differential Revision: https://developer.blender.org/D12672
Though the factor isn't so useful to adjust by itself, and is mostly
useful when used with a field connected, the slider from 0 to 1 can
help to make it clear that it's just used as a multiplier for the max
density after distribution.
Differential Revision: https://developer.blender.org/D12654
Because of a bug in VS2017 codecvt is replaced with Blender
BLI functions to convert from UTF8 to UTF32.
Differential Revision: https://developer.blender.org/D12655
NOTE: this feature is not ready for user testing, and not yet enabled in daily
builds. It is being merged now for easier collaboration on development.
HIP is a heterogenous compute interface allowing C++ code to be executed on
GPUs similar to CUDA. It is intended to bring back AMD GPU rendering support
on Windows and Linux.
https://github.com/ROCm-Developer-Tools/HIP.
As of the time of writing, it should compile and run on Linux with existing
HIP compilers and driver runtimes. Publicly available compilers and drivers
for Windows will come later.
See task T91571 for more details on the current status and work remaining
to be done.
Credits:
Sayak Biswas (AMD)
Arya Rafii (AMD)
Brian Savery (AMD)
Differential Revision: https://developer.blender.org/D12578
This commit adds nodes to do direct conversion between meshes and point
clouds in geometry nodes. The conversion from mesh to points is helpful
to instance once per face, or once per edge, which was previously only
possibly with ugly work-arounds. Fields can be evaluated on the mesh
to pass them to the points with the attribute capture node.
The other conversion, point cloud to mesh vertices, is a bit less
obvious, though it is still a common request from users. It's helpful
for flexibility when passing data around, better visualization in the
viewport (and in the future, cycles), and the simplicity of points.
This is a step towards T91754, where point clouds are currently
combined with meshes when outputing to the next modifier after geometry
nodes. Since we're removing the implicit behavior for realizing
instances, it feels natural to use an explicit node to convert points
to vertices too.
Differential Revision: https://developer.blender.org/D12657
Change the toggle to switch between an attribute and a single value to
only display for inputs that are fields, as determined statically by
the field inferencing added in rB61f3d4eb7c7db7. This means the field
inferencing must be calculated on file load, since it's used in the UI.
Differential Revision: https://developer.blender.org/D12623
As described in T91672, often it can be much more efficient to run each
node only on the unique geometry of the instances, rather than realizing
all instances and potentially processing redundant data. Sometimes the
performance difference can be completely smooth vs. completely unusable.
Geometry nodes used to hide that choice from users by always realizing
instances, but recently we have decided to expose it. So this commit
makes nodes run once per unique reference in the entire tree of nested
instances in their input geometries, continuing the work started in
rB0559971ab377 and rBf94164d89629f0d2. For the old behavior, a realize
instances node can be added before the nodes, which is done in the
versioning code.
Differential Revision: https://developer.blender.org/D12656
This should not be allowed in general, added some initial call to check
when user is allowed to delete a data to search for mandatory override
usages...
- Curve to Points: Needs output sockets
- Curve Endpoitns: Needs the same output sockets
- Edge Split: Should have a selection input instead
- Subdivision Surface: Should not use "crease" implicitly
All new versions of these nodes should also not implicitly
realize instances.
Since we bumped the number of channels to 128, I forgot to doversion the
editors. So new files (new editors) would have this right, but not
existing files.
Fixup to: 8fecc2a852
Own mistake when making NLA overridable, instead of assuming things
about the ID owner of the animation data being processed, properly
return and use the one found by `ED_actedit_animdata_from_context`.
Particle copying code was already properly sharing pointcache between
orig data and its copy only when `LIB_ID_COPY_SET_COPIED_ON_WRITE` is
set, do the same for the other point cache users.
Using `LIB_ID_CREATE_NO_MAIN` here is waaaaaaay to much wide scope for
such a dangerous/advanced behavior, that kind of things has to be
strictly restricted in scope.
Remove `AssetCatalogService::write_to_disk()` function. It has been
superseded by `write_to_disk_on_blendfile_save()`; the handful of test
functions that called the old function have been adjusted to use the
new one.
No functional changes to Blender itself.
This change fixes an issue when scene has a shadow catcher and film is
configured to be transparent. Starting viewport render and making the
background non-transparent will cause bad memory access (wrong render
and possibly crash).
Film passes depends on transparency of background, so check for this.
Demo file: F10650585
Differential Revision: https://developer.blender.org/D12666
Only do denoising on the full-frame result. Saves render time.
Can re-consider in the future when/if we'll want to support
denoising during rendering (similar to viewport) to allow artists
to stop rendering when they see image to be good enough. Until
there is a design for that workflow stick to a more time efficient
rendering.
Differential Revision: https://developer.blender.org/D12662
Use dashes to represent the function flow (while keeping continuous
lines for the data-flow).
It is important to tell both flows apart (the data and the function
flow). The sockets help with that, the noodles help this further.
The "data flow" is evaluated at every single node. A user can inspect
the output sockets of those nodes and have a glimpse at their values.
The "function flow" (nodes) however is only evaluated in the geometry
nodes. The noodles are not transporting data in the same sense of the
"data flow". All that can be inspected are the attributes the functions
depend on.
Having this clearly communicated should help users to inspect the
nodetrees, read and understand the different flows in the same tree.
---
Known limitations:
At the moment the dash lines are not equidistant:
* It would be nice to get the "uv.x" to be resampled for the bezier curve
so the dashes are equally distributed in the curve.
* Using distance between the P3 and P0 instead of the real bezier curve
length seems to be fine.
---
Full disclaimer:
Changes with that much of a visual impact tend to be controversial. So
far the main feedback is that dashed lines can be associated to broken
link, and that there are better ways to represent the flows (or
different information that should be visually represented).
I'm fully aware of that. However dashed lines are already used in the
viewport and outliner to indicate (hierarchical) relation. Besides,
other approaches (double-lines, having the data flow to be more
distinct, ...) didn't pan out in the end (or didn't look as good as
this).
---
Impact in other editors:
The compositor uses mostly a "data flow" nodetree, so no change is
expected there.
The shader nodetree is one that could but doesn't have to change its
visual language.
The shader nodetree uses mostly "function flow" with some "data flow" nodes.
One can argue that it should be adapted to follow the
same pattern as geometry nodes (with the new noodles and the diamond
sockets). Oh the other hand, a shader nodetree has a single context.
When a node depends on the "UV", there is only one UV at a time for the
entire nodetree. So it can also be treated as a psedo "data flow"
nodetree if we want to avoid too many changes in other parts of Blender.
Differential Revision: https://developer.blender.org/D12602
Add `AssetCatalogService::update_catalog_path()` to change the catalog
path of the given catalog, and also change the path of all the catalogs
contained within the given catalog.
Rebuilds the tree structure for the UI, but does not save the new catalog
definitions to disk.
No user-facing changes, just backend preparation for UI work.
NLA and Dope Sheet use a specific transform operation to scale.
Unlike the conventional resize operation, `TIME_SCALE` operates on `td->val`.
This is a bit outside the convention of transform operators.
The expected thing in this case would be to work in `td->loc` and use the conventional resize operator.
But for now, to fix the problem, use `td->loc` in the `TIME_SCALE` operation.
This commit also brings a cleanup in the style of some comments and removing unnecessary `memset`.
The Clear Asset operator (`ASSET_OT_clear`) now clears the Fake User.
This makes it symmetrical with the Mark Asset (`ASSET_OT_mark`)
operator, which sets Fake User to ensure assets are always saved to
disk.
Clear Asset now also has a `set_fake_user` boolean option, which allows
users to Clear Asset and set Fake User in one go.
The asset browser now shows these options in the context menu:
- Clear Asset: also clears Fake User. This makes it possible to actually
remove assets from the blend file without leaving the Asset Browser.
- Clear Asset (Set Fake User): keeps the Fake User bit set. This makes
it possible to "hide" the asset from the asset browser, without
loosing the actual data.
Internally, the `ED_asset_clear_id(id)` function now always clears the
Fake User bit. If it was intended that this bit was kept set, it's up to
the caller to explicitly call `id_fake_user_set(id)` afterwards.
Manifest Task: T90844
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D12663
Currently the Drivers Editor shows this (the blue thing can be dragged
to change frame):
{F10647661}
But the Drivers Editors X axis is the output of the driver [which can be
further tweaked by the curve] not time(frame).
So it seems better to not mix them here, it is just confusing to have
two different units on one axis.
Especially since what we really want to look at in X (the drivers output
value) can be in a totally unrelated range compared to frames, so e.g.
we might be interested in a drivers range from 0.0 to 1.0 and a
framerange of 100 to 200, so putting this on one axis just does not make
sense. Better to use a separate timeline for this.
Note 2.79 also did not do this.
Maniphest Tasks: T91157
Differential Revision: https://developer.blender.org/D12392
When "Show Cursor" is unchecked, the Drivers Editor would still display
the vertical line representing the cursor x.
Probably overseen in {rB65072499c65a} (historically the vertical line
could represent either the current frame of the cursor X in drawing, but
this is now much more separate).
There is no point in seeing part of the cursor in the Drivers Editor if
this is disabled.
Also correct outdated comments.
ref. T91157
Maniphest Tasks: T91157
Differential Revision: https://developer.blender.org/D12391
Make `BLI_path_contains()` case-insensitive on Windows. This behaviour
is dependent on the platform Blender is running on, like the rest of
BLI_path, and not on the style of paths (Windows-style paths will be
treated case-sensitively when Blender is running on Linux/macOS).
The related issue which is fixed by this change is the missing noisy
image pass when denoising and border render is used,
Need to allocate passes after the passes has been copied from the
original render result.
Labels in headers reserved space for an icon even when no icon was used.
This is caused by the shared function ui_text_icon_width adding 1.5x
a buttons X-units width the the width of the string.
Menu buttons detected this and subtracted the extra padding.
Instead of adding the same workaround for labels,
add ui_text_icon_width_ex that takes a padding argument.
Add presets for 'default', 'compact' and 'none' to avoid duplicating
padding values.
This allows removal of hard-coded label scaling for the add-object tool.
While World data has always been able to be marked as an asset, there
was no way to actually use them from the asset browser. This change
allows users to drag-drop world assets onto the Viewport and have them
appended/linked to their scene.
Differential Revision: https://developer.blender.org/D12566
Only run the node once for every unique geometry set in the input's
instance heirarchy. This can massively improve performance when
there are many instances, but it will mean that the result is the same
for every instance. For the previous behavior, a "Realize Instances"
node can be used before this one.
This node can be changed without versioning since the old material
assign node was already deprecated and replaced.
In a sub-panel it will be clearer that they are outputs, since they
just look like more inputs now. Unfortunately it is not possible to
make sub-panels display conditionally currently, so the output
sub-panel will always be visible whether or not it is empty.
Differential Revision: https://developer.blender.org/D12653
Part of the fix is by Jacques. This fixes the most obvious case, but it's
still not clear how to deal with non-mesh geometry instances or how to handle
motion blur for such instances.
As also explained in D6134, in most case of Stretch To usage in
rigs, it is desirable to use swing rotation, either via the old
method of pairing the constraint with Damped Track, or via the
Swing rotation type introduced in 2.82. This is for instance true
for all usages of the constraint in Rigify.
The reason can be understood by realizing that unlike order-
dependent euler rotations, swing is not biased to an axis, and
isn't affected by gimbal lock effects at merely 90 degrees
of rotation (it has only one singularity at 180 degrees).
Thus it makes sense to change the default for newly created
constraints to the Swing mode. This has no backward compatibility
concerns except for old tutorials and rig generation scripts.
Differential Revision: https://developer.blender.org/D12643
Basically this enables the select-tweaking behavior as per the
guidelines:
https://wiki.blender.org/wiki/Human_Interface_Guidelines/Selection#Select-tweaking.
We use this in most other other editors that allow selecting and
dragging multiple items. But besides the consistency improvement, this
is important if we want to support dragging multiple assets (or files)
in future. We want to support this at least for dragging multiple assets
into an asset catalog for the upcoming asset catalog UI.
With this commit, the distribute points on faces node runs only
once for every unique mesh in its input. That means if there are
100 instances of the same mesh, it will only run once.
This basically reverts rB84a4f2ae68d408301. The optimization there
didn't end up being worth it in the end, since it complicates code
quite a lot. It's also incompatible with this method of dealing with
instances, and it breaks field evaluation for instances, where we would
have to make sure to handle each instance transform properly otherwise,
evaluating the field separately for every instance.
Differential Revision: https://developer.blender.org/D12630
The Asset Catalog Definition File is now saved whenever the blend file
is saved. The location of the CDF depends on where the blend file is
saved, and whether previously a CDF was already loaded, according to the
following rules. The first matching rule wins:
1. Already loaded a CDF from disk? -> Always write to that file.
2. The directory containing the blend file has a
`blender_assets.cats.txt` file? -> Merge with & write to that file.
3. The directory containing the blend file is part of an asset library,
as per the user's preferences? -> Merge with & write to
`${ASSET_LIBRARY_ROOT}/blender_assets.cats.txt`
4. Create a new file `blender_assets.cats.txt` next to the blend file.
Add `BKE_preferences_asset_library_containing_path(&U, some_path)` that
finds the asset library that contains the given path.
This is a simple linear search, returning the first asset library that
matches. There is no smartness when it comes to nested asset libraries
(like returning the library with the best-matching path), although this
could be a useful feature to add later.
Add function `BLI_path_contains(container, containee)` that returns true
if and only `container` contains `containee`.
Paths are normalised and converted to native path separators before
comparing. Relative paths are *not* made absolute, to simplify the
function call; if this is necessary the caller has to do this conversion
first.
`BKE_object_material_slot_used` would only check obdata usages, but
particle settings can also (weirdly enough) use objects' material slots.
So now, as its name suggests, `BKE_object_material_slot_used` does take
an object as parameter, and also checks for potential slot usage from
psys in the object.
* Fixes missing update of the catalog tree when adding catalogs.
* Adds iterators for the catalogs, needed for UI code.
* Store catalog ID in the catalog tree items, needed for UI code.
* Other smaller API additions for the UI.
* Improve comments and smaller cleanups.
New functions are covered with unit tests.
Differential Revision: https://developer.blender.org/D12618
Reviewed by: Sybren Stüvel
This adds a new `GeometrySet::modify_geometry_sets` method that can be
used to update each sub-geometry-set separately without making any
instances real.
Differential Revision: https://developer.blender.org/D12650
Before the visibility test against the visibility flags was performed in an any-hit program in OptiX
(called `__anyhit__kernel_optix_visibility_test`), which was using the `__prim_visibility` array.
This is not entirely correct however, since `__prim_visibility` is filled with the merged visibility
flags of all objects that reference that primitive, so if one object uses different visibility flags
than another object, but they both are instances of the same geometry, they would appear the same
way. The reason that the any-hit program was used rather than the OptiX instance visibility mask is
that the latter is currently limited to 8 bits only, which is not sufficient to contain all Cycles
visibility flags (12 bits).
To mostly fix the problem with multiple instances and different visibility flags, I changed things to
use the OptiX instance visibility mask for a subset of the Cycles visibility flags (`PATH_RAY_CAMERA`
to `PATH_RAY_VOLUME_SCATTER`, which fit into 8 bits) and only fall back to the visibility test any-hit
program if that isn't enough (e.g. the ray visibility mask exceeds 8 bits or when using the built-in
curves from OptiX, since the any-hit program is then also used to skip the curve endcaps).
This may also improve performance in some cases, since by default OptiX can now perform the normal
scene intersection trace calls entirely on RT cores without having to jump back to the SM on every
hit to execute the any-hit program.
Fixes T89801
Differential Revision: https://developer.blender.org/D12604
* ID pointer returned by `wm_file_link_append_datablock_ex` was
improperly extracted from `WMLinkAppendDataItem` before append step.
* Code deleting linked IDs when their local matching version was re-used
did not properly clear `LIB_TAG_DOIT` beforehand.
If the theme used by the user did not touch the wire or the wire outline
colors this will update them as well.
This was supposed to be a part of a bigger UI theme change for 3.0. But
it was expedited because of the recent change in line thickness for the
noodles (2bd0205215).
Theme change by Pablo Vazquez.
Differential Revision: https://developer.blender.org/D12649
This patch allows passing a field to the modifier as output. In the
modifier, the user can choose an attribute name. The attribute
will be filled with values computed by the field. This only works
for realized mesh/curve/point data. As mentioned in T91376, the
output domain is selected in the node group itself. We might want
to add this functionality to the modifier later as well, but not now.
Differential Revision: https://developer.blender.org/D12644
For some reason was assuming setting a property in RNA would call its
update callback if any, but this actually needs to be done separately.
So add this call to `rna_property_override_operation_apply`.
There are cases where there is no way to ensure we do have/know about an
active scene. Further more, this should not be required to perform
'real' updates on data, only to perform additional special handling in
current scene (mostly related to editing tools, UI, etc.).
This pointer is actually almost never used in practice, and half of its current
usages are fairly close to abuse of the system (like calls to
`ED_gpencil_tag_scene_gpencil` or `BKE_rigidbody_cache_reset`).
This commit ensures that the few places using this 'active scene' pointer are
safely handling the `NULL` case, and clearly document the fact that a
NULL scene pointer is valid.
Scene passed to the update callback is the active scene it //may// not
be that actual ID owner of the affected data (although in practice it
should always be currently).
This makes it easier to spot which links contain fields and which
contain data. Actually, the patch makes all other links a bit thicker.
However, with soon-to-be-implemented theme changes, the
perceived thickness will be the same as before.
This is part of T91563.
Differential Revision: https://developer.blender.org/D12646
The original limit dates back from 2002 when Blender went open source.
After that many years some productions (e.g., Sprite Fright) are already
experiencing limitations for complex edits.
The future plans is to support an initial shorter (2?) number of
channels with support to "unlimited" channels.
Finally, I'm bumping the minimum file requirement since files with more
than 32 channels won't work well in old Blender versions.
In a future commit I will implement a sanitization so that we only read (and write)
128 channels. Making sure future changes of this number won't corrupt Blender.
Differential Revision: https://developer.blender.org/D12645
The clamp added will ensure immediate speed direction change on
changing to/from positive/negative speed factor when using the Speed
effect strip's Multiply mode.
Reviewed By: ISS, sergey
Differential Revision: https://developer.blender.org/D12462
Whilst in pose-mode, the selection filter only includes other objects in
pose-mode instead of the object selection.
This makes sense as the selection of the pose bones what the user as
acting on in the 3D view.
The object selection only makes sense to use in object mode.
Reviewed By: sybren
Maniphest Tasks: T81922
Ref D12494
While the option allows tools be be activated on press instead of tweak,
this meant box-select was catching Ctrl-LMB which is also used for
add/extrude in edit mode.
Resolve this by always using tweak for selection tools,
only supporting activation on press for other tools.
Note that this doesn't impact the default configuration.
This adds the ability to cancel out of the roll using ESC or RMB
(which is not common for viewops -- but makes sense in the case of roll
I think). This resets the view as well as potential locked cameras to
the original orientations (but does not remove potential autokeys --
which no transform does on cancel btw.)
Maniphest Tasks: T89883
Differential Revision: https://developer.blender.org/D12582
Since its introduction in {rB5c569d227b64}, the view roll was based on
horizontal movement only. Using a "real" angle not only feels more
natural but also has the benefit of getting more precission the further
away from the center you are (just like regular rotation, brush/stencil
rotation etc.). A similar thing has already been implemented in the
Grease Pencil Tools Addon, now make the blender standard roll the same.
Since this is not using the transform system, we are still lacking a
line in the viewport (this could be added but since this is always based
on the center of the view we dont necessarily need this), as well as the
additional Shift-extra-precission behavior.
Fixes T89883
Maniphest Tasks: T89883
Differential Revision: https://developer.blender.org/D12582
Proxy conversion is a fairly particular case of liboverride creation, in
which remapping all local usages of linked data probably makes more
sense, rather than only doing so whitin the overridden 'group' of IDs.
Introduce `BKE_callback_remove()`, which undoes the effect of
`BKE_callback_add()`. It also respects `funcstore->alloc` by freeing the
removed `funcstore` when needed.
This allows for shorter-lived objects in memory to unregister their
callbacks at the end of their lifespan.
`BKE_callback_global_finalize()` has been adjusted so that the
responsibility "remove a callback" is given to one function only.
Reviewed by: campbellbarton
Differential Revision: https://developer.blender.org/D12625
This adds a new Instance on Points node that is a replacement
for the old Point Instance node. Contrary to the old node,
it does not have a mode to instance objects or collections
directly. Instead, the node has to be used with an Object/
Collection Info to achieve the same effect.
Rotation and scale of the instances can be adjusted in the node
directly or can be controlled with a field to get some variation
between instances.
The node supports placing different instances on different points.
The user has control over which instance is placed on which point
using an Instance Index input. If that functionality is used, the
Instance Geometry has to contain multiple instances that can are
instanced separately.
Differential Revision: https://developer.blender.org/D12478
This adds two new input sockets to the Collection Info node:
* `Separate Children`: When turned off, the entire collection is output as a single
collection instance (same behavior as before). When turned on, each child of
the collection is output as a separate instance (children can be objects and collections).
Toggling this input should not change the visual transforms of the output geometry.
* `Reset Children`: Only used when `Separate Children` is on. When used, the transforms
of the instances are reset to the origin. This is useful when one wants to e.g. instance
the collection children separately in the upcoming instancing node.
Part of D12478.
Fix T91632: Stops the sample correlation between dimensions which was causing rendering artefacts on simple scenes.
This is done by increasing the amount of jitter the Cranley Patterson Rotation is allowed to add. Also, it uses the y dimension of the of the sample table for 1D sampling which causes further decorrelation between dimensions. As an additional measure the x and y dimensions are swapped randomly to provide further decorrelation.
Maniphest Tasks: T91632
Differential Revision: https://developer.blender.org/D12610
Zoom to Fit is working in all display modes, but was only exposed in
Image mode. This patch exposes it in all Image modes.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D12632
Multi-functions are not allowed to throw exceptions that are not
caught in the same multi-function. Previously, it was difficult to
backtrack a crash to a previously thrown exception.
smooth out jaggy lines with a given threshold. For each point in a stroke, the ones with in a given distance of its previous segment will be removed,
thus "zig-zag" artefacts can be cleaned up.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12050
This will help detecting missing API changes. Those keywords were added
on classes which did not already use them. Also added missing
`accepts_object_type()` on NURBS reader.
Point clouds are not imported and read anymore. This was caused by an
API change in rB128eb6cbe928e58dfee1c64f340fd8d663134c26 which was not
applied to `AbcPointsReader`. It did not cause a compile error as the
base class as a default implementation for this method.
We were writing large 2048x2048 tiles into EXR files, which appears to cause
integer overflow inside the OpenEXR library when there are multiple passes. Now
use smaller tiles in the image file, while still rendering large tiles.
This adds the requirement that the render tile size must be a multiple of 128
or be smaller than 128, this is adjusted automatically.
This node replaces the deprecated Attribute Randomize node, populating
a vector, float, integer or boolean field with random values. Vector,
float, and integer have min/max settings, which are also field aware.
The boolean type has a probability value for controlling what portion
of the output should be true. All four types have a field seed input
which is implicitly driven by the index, otherwise, all values would
be the same "random" value.
The Random Float node is now deprecated like other nodes, since it is
redundant with this node.
Differential Revision: https://developer.blender.org/D12603
Until now, the asset catalogs would only show up after all assets from
the library were loaded. Now the catalogs are read first, which makes
them appear pretty much immediately. This makes the UI more responsive
and feel less heavy.
I added a dedicated file-list type for asset libraries now. While not
necessarily needed, I prefer that so asset library specific stuff can be
handled in there.
This commit adds a node that generates a text paragraph as curve
instances. The inputs on the node control the overall shape of the
paragraph, and other nodes can be used to move the individual instances
afterwards. To output more than one line, the "Special Characters" node
can be used.
The node outputs instances instead of real geometry so that it doesn't
have to duplicate work for every character afterwards. This is much
more efficient, because all of the curve evaluation and nodes like fill
curve don't have to repeat the same calculation for every instance of
the same character.
In the future, the instances component will support attributes, and the
node can output attribute fields like "Word Index" and "Line Index".
Differential Revision: https://developer.blender.org/D11522
This patch adds a new node called "Special Characters" with two string
outputs: "Line Break" and "Tab". This is necessary because the newline
character cannot be easily typed with a keyboard, but is necessary for
the string to curve node.
Differential Revision: https://developer.blender.org/D12620
This adds initial limited support for socket tooltips. It's limited
in a couple of ways for now:
* Only works when hovering over the socket shape, not when hovering
over the value in the socket.
* Only works for built-in nodes that already use the new node
declaration system. This can later be extended to support pynodes.
Those limitations are well worth it for now, given that the
implementation is quite simple and the impact on usability is quite
large. More complex updates to the layout system, that would allow
showing socket tooltips in the nodes, can be done later. With the
current implementation we can at least start writing tooltips for
geometry nodes now.
This commit already adds tooltips for the Cylinder node as an example.
Differential Revision: https://developer.blender.org/D12607
In meshes modifer the Lowest is 0 and Highest is 1.0 and this was working inverted for grease pencil. Now, it works equals to meshes modifier.
Also changed the tooltip to keep consistency with meshes modifier.
When writing asset catalog definition files, order the catalogs by
(path, UUID). This ensures that every write produces the same file, playing
nice with versioning / synchronisation systems.
Add `operator<` to C++ class to allow lexicographic ordering of UUIDs.
This will be necessary when writing asset catalogs to disk in a predictable
(i.e. ordered) manner.
The "path with trailing slash" test catalog was using the same path as
another catalog, which meant it was ignored after doing the path
cleanup. It's now different in the test file in SVN, so it'll actually
show up in the test.
This commit also add an experimental userPreferences to prevent proxies
conversions on file load, and reporting for amount of coverted proxies
(and possible issues).
Note that potentially linked proxies from other libraries are not
hamdled here (this feature seems to be broken anyway in master
currently?).
This adds a replacement for the deprecated Point Distribute node.
Arguments for the name change can be found in T91155.
Descriptions of the sockets are available in D12536.
Thanks to Jarrett Johnson for the initial patch!
Differential Revision: https://developer.blender.org/D12536
By default, we'll always get a falloff like this from the tool:
{F10559413}
But in the context of using vertexgroups in modifiers/modeling, a choice
on how the gradient falloff of the Weightpaint Gradient tool is shaped
would be desirable:
"real" linear:
{F10559416}
Custom:
{F10559421}
{F10559428}
The way the Weightpaint gradient tool works is a bit outside the usual
tools that use brushes [even though it creates a brush on the fly in
`WPGradient_userData`].
However, it does not have an entry in `eBrushWeightPaintTool` and adding
one there does not play nice for the same reasons (not "really" being
integrated in the brush-based tools).
So in order to expose the brush curve in the UI, we would have to do one
of the following:
- [1] try to use `VIEW3D_PT_tools_brush_falloff`, for this to work:
-- make all kinds of exception in python super classes [`FalloffPanel`,
`BrushPanel`, `UnifiedPaintPanel`, ... -- including making real entries
in `eBrushWeightPaintTool`] to get a proper tool mode and...
-- .. to also make sure Falloff Shape and Front-Face Falloff are not
available [which the tool seems to just not support in its current form]
- [2] just have a simple, contained panel for this tool alone
This patch implements [2] and adds it as part of the ToolDef (could also
be done in `VIEW3D_HT_tool_header`, but again, I think this is nice to
keep separate from the usual tools)
{F10559482}
{F10559485}
Testfile:
{F10559442}
Fixes T91636
Maniphest Tasks: T91636
Differential Revision: https://developer.blender.org/D12614
When Browsing libraries the asset files were opened multiple times.
once to determine the needed groups to query and once for each
group to query the items in the group. For file browsing this makes sense
but for asset browsing this can be reduced.
This patch will load the asset files recursively and only opens them once.
Another change is that only the assets are requested and not filtered out
later in the process.
This patch is needed to simplify the library indexing. Where
we need access to the full library content.
## The numbers ##
Benchmarked by adding scenes of the spring open movie to the default
asset library. Refreshing the asset library would recursively load all the files
there.
| **8bc27c508a** | Processed 317 'directories/libraries' | 7.573986s |
| **Patch** | Processed 42 'directories/libraries' | 0.821013s |
{F10442811}
Reviewed By: mont29, Severin
Maniphest Tasks: T91406
Differential Revision: https://developer.blender.org/D12499
Goal is to add the length attribute to the Hair Info node, for better control over color gradients or similar along the hair.
Reviewed By: #eevee_viewport, brecht
Differential Revision: https://developer.blender.org/D10481
This implements the update logic for the vizualization of which
sockets pass data or constants directly, and which pass functions.
The socket shapes may still have to be updated. That should be
done separately, because it might be a bit more involved, because
socket shapes are currently linked to keyframe shapes. Currently
the circle and diamond shapes are used with the following meanings:
- Input Sockets:
- Circle: Required to be a single value.
- Diamond: This input supports fields.
- Output Sockets:
- Circle: This output is a single value.
- Diamond: This output may be a field.
Connecting a field to a circle input socket is an error, since a
field cannot be converted to a single value. If the socket shape
is a diamond with a dot in the middle, it means it is currently
a single value, but could be a field.
In addition to socket shapes, the intention is to draw node links
differently based on the field status. However, the exact method for
conveying that isn't decided yet.
Differential Revision: https://developer.blender.org/D12584
Previously this was only loading built-in render passes. Now instead of trying
to load the scene render passes, load whatever passes exist in the cache file.
Using a RenderResult (or a Viewer) was never really working (think you
cant get a real ImBuff from these) -- cannot use it as a clone, stencil
or canvas [Single Image paint texture slot].
In the case of using it as a 2D paint clone image this would also crash
[due to the Image Editor drawing refactor in 2.91].
Now [in the spirit of T73182 / D11179], prevent using these where
unappropriate by using rna pointer polling functions.
Also add a security check for the 2D paint clone image crash in case a
stencil ImBuff cannot be provided for some reason, but generally old
files are now patched in do_versions_after_linking_300 (thx @brecht!).
Fixes T91625.
Maniphest Tasks: T91625
Differential Revision: https://developer.blender.org/D12609
This follows three main targets:
* Make creation of new tree UIs easy.
* Groundwork to generalize tree UIs (so e.g. Outliner, animation
channels, asset catalogs and spreadsheet data-sets don't have to
re-implement basic tree UI code) or even other data-view UIs.
* Better separate data and UI state. E.g. with this, tree-item selection
or the open/collapsed state can be stored on the UI level, rather than
in data. (Asset Catalogs need this, storing UI state info in them is
not an option.)
In addition, the design should be well testable and could even be
exposed to Python.
Note that things will likely change in master still. E.g. the actually
resulting UI isn't very nice visually yet.
The design is documented here:
https://wiki.blender.org/wiki/Source/Interface/Views
Differential Revision: https://developer.blender.org/D12573
This patch simplifies the curve object to mesh conversion
used by the object convert operator and exporters.
The existing code had a convoluted model of ownership, and did quite
a bit of unnecessary work. It also assumed that curve objects always
evaluated to a mesh, which is not the case anymore.
Now the code checks if the object it receives is evaluated. If so,
it can simply return a copy of the evaluated mesh (or convert the
evaluated curve wire edges to a mesh if there was no evaluated mesh).
If the object isn't evaluated, it uses a temporary copy of the object
with modifiers removed to create the mesh in the same way.
This follows up on the recent changes to curve evaluation,
namely that the result is always either a mesh or a wire curve.
Differential Revision: https://developer.blender.org/D12533
This adds three new methods:
* `InstancesComponent::foreach_reference_as_geometry(...)`
* `GeometrySet::attribute_foreach(...)`
* `GeometrySet::gather_attributes_for_propagation(...)`
The goal is that these iteration primitives can be used in places
where we use more specialized iterators currently.
Differential Revision: https://developer.blender.org/D12613
Put the `bUUID` class in the `blender` namespace, instead of the
`blender::bke` namespace.
As a result, some C++ code now correctly uses the C++ class, where
previously it would use the C struct and use implicit casting where
necessary. As a result, support for initializer lists had to be
explicitly coded and in another place an explicit `::bUUID` was
necessary to avoid ambiguity.
No functional change.
The shader is complicated by itself, having hardcoded values makes it
even more cryptic.
I also renamed the shader because the shader is not for the keyfarme diamond only,
but for all the keyframe shapes.
Differential Revision: https://developer.blender.org/D12615
Choosing a UV layer would actually affect the overlay in the viewport
and also painting with the mask brush was in that UV space, but the
resulting stencil mask was always applied with the active UV (not the
explicitly selected stencil UV -- the one one is looking at in the
viewport!) to painting.
This has been like that as far as I have checked back (at least 2.79b),
I am surprised this has not come up before, but it does not seem to make
sense at all...
Now use the UV specified for the stencil layer when applying the mask for
painting, so it corresponds to the stencil mask one is looking at in the
viewport.
Maniphest Tasks: T91557
Differential Revision: https://developer.blender.org/D12583
Declare the current format used for asset catalog definition files as
version 1, and write that to the files. Files without that version number
will be rejected.
This makes it much easier to move to different versions later, with the
opportunity to do versioning on file load.
The version is not associated with any version of Blender, but a separate
integer that's simply incremented when a non-backward-compatible change
happens.
Catalogs work like directories on disk (without hard-/symlinks), in that
an asset is only contained in one catalog.
See T90066 for design considerations.
#### Known Limitations
Only a single catalog definition file (CDF), is supported, at
`${ASSET_LIBRARY_ROOT}/blender_assets.cats.txt`. In the future this is
to be expanded to support arbitrary CDFs (like one per blend file, one
per subdirectory, etc.).
The current implementation is based on the asset browser, which in
practice means that the asset browser owns the `AssetCatalogService`
instance for the selected asset library. In the future these instances
will be accessible via a less UI-bound asset system.
The UI is still very rudimentary, only showing the catalog ID for the
currently selected asset. Most notably, the loaded catalogs are not
shown yet. The UI is being implemented and will be merged soon.
#### Catalog Identifiers
Catalogs are internally identified by UUID. In older designs this was a
human-readable name, which has the problem that it has to be kept in
sync with its semantics (so when renaming a catalog from X to Y, the
UUID can be kept the same).
Since UUIDs don't communicate any human-readable information, the
mapping from catalog UUID to its path (stored in the Catalog Definition
File, CDF) is critical for understanding which asset is stored in which
human-readable catalog. To make this less critical, and to allow manual
data reconstruction after a CDF is lost/corrupted, each catalog also has
a "simple name" that's stored along with the UUID. This is also stored
on each asset, next to the catalog UUID.
#### Writing to Disk
Before saving asset catalogs to disk, the to-be-overwritten file gets
inspected. Any new catalogs that are found thre are loaded to memory
before writing the catalogs back to disk:
- Changed catalog path: in-memory data wins
- Catalogs deleted on disk: they are recreated based on in-memory data
- Catalogs deleted in memory: deleted on disk as well
- New catalogs on disk: are loaded and thus survive the overwriting
#### Tree Design
This implements the initial tree structure to load catalogs into. See
T90608, and the basic design in T90066.
Reviewed By: Severin
Maniphest Tasks: T91552
Differential Revision: https://developer.blender.org/D12589
Buttons to edit asset metadata are now disabled for assets from an
external library (i.e. assets not stored in the current .blend file).
Their tooltips explain why they are disabled.
Had to do some RNA trickery to disable the metadata properties at RNA
level, not at UI script level.
The basic idea is:
* Local data-block assets set the data-block as owning ID for the asset
metadata RNA pointer now.
* That way we can use the owner ID to see where the metadata belongs to
and decide if it's editable that way.
* Additionaly, some Python operators needed better polling so they show
as grayed out, and don't just fail.
One important thing: Custom properties of the metadata can still be
edited. The edits won't be saved however. Would be nice to disable that,
but it's currently not supported on BPY/IDProperty/RNA level.
Addresses T82943.
Differential Revision: https://developer.blender.org/D12127
Make the Windows version of `BLI_dir_create_recursive()` call
`BLI_path_slash_native()` before it tries to handle the path. This
should make it possible to call it with non-native path separators.
This change was provided by our Windows platform maintainer @LazyDodo in
P2414, so I assume he agrees with this change.
This allows most tools to activate on press, removing a small but
noticeable distance between the initial press and detection of a drag
event.
Gizmo tweak no longer actives when Alt is held, to avoid conflicting
with cursor placement.
This has the advantage that the gizmo doesn't get in the way when Alt
is used for activating tools or placing the cursor.
Some gestures were activating immediately on tweak events,
extend this to mouse-press and click-drag.
Without this change, box-select for example wouldn't be automatically
activated on mouse-press.
There is no reason to lock behavior into a specific configuration in
those calls, make them properly configurable like the rest of the
link/append code.
This also enable users of those functions to activate 'ID reuse'
behavior.
in asset context, when user drag & drop a material several time, they
would still expect to re-use existing one instead of getting new copies
of it, even if this material is directly appended (and not an indirect
dependency of an object e.g.).
Flags controlling link/append code are split between two enums, one in
`DNA_space_types.h` and one in `BLO_readfile.h`.
This commit:
- Moves flags exclusively used in WM and BLO code to `eBLOLibLinkFlags`
in `BLO_readfile.h`. Flags in `eFileSel_Params_Flag` from
`DNA_space_types.h` are now only the ones effectively used by the
file browser editor code too.
- Fixes some internal utils in `readfile.c` still taking `short` flag
parameter instead of proper `int` one.
NOTE: there are a few other flags that could probably be moved to
`eBLOLibLinkFlags` (at the very least `FILE_LINK`, probably also
`FILE_AUTOSELECT` and `FILE_ACTIVE_COLLECTION`), since those are not
effectively used by the file browser, and control linking/appending
behavior, not filebrowser behavior.
However for now think it's safer to not touch that.
This commit changes the custom property edit operator to make editing
different properties types more obvious and expose more of the data,
made more easily possible by the recent UI data refactor.
Previously, the operator guessed the type you wanted based on what you
wrote in a text box. That was problematic, you couldn't make a string
property with a value of `1234`, and you had to know about the Python
syntax for lists in order to create an array property. It was also slow
and error prone; it was too easy to make a typo.
Improvements compared to the old operator:
- A type drop-down to choose between the property types.
- Step and precision values are exposed.
- Buttons that have the correct type based on the property.
- String properties no longer display min, max, etc. buttons.
- Generally works in more cases. The old operator tended to break.
- Choose array length with a slider.
- Easy to choose to use python evaluation when necessary.
- Code is commented, split up, and much easier to understand.
The custom property's value is purposefully not exposed, since the Edit
operator is for changing the property's metadata now, rather than the
value itself. Though in the "Python" mode the value is still available.
More improvements are possible in the future, like exposing different
subtypes, and improving the UI of the custom properties panel.
Differential Revision: https://developer.blender.org/D12435
This adds constrained angle mode improvements,
snapping to global and local orientation,
visible distance and angle measurements,
undo capability,
x-ray mode,
multi-object edit mode.
See https://developer.blender.org/D12600 for more details.
Note: this project moved some of the default keymappings
around a bit, as discussed with users in the thread
https://devtalk.blender.org/t/gsoc-2021-knife-tool-improvements-feedback/19047
We'll change the manual documentation in the next couple of days.
Issue caused by our patch in rB1af722b81912
we replaced an array with a memory allocation
but we forgot to update the assert which now
used an invalid method to calculate the array
size.
SVN libs will have to be updated before
T91602 will be fixed for end users.
Added description for Batch rename which pop-ups when
hovering the mouse over "Batch rename" inside the edit menu.
Fixes T91390
Reviewed By: Blendify
Maniphest Tasks: T91390
Differential Revision: https://developer.blender.org/D12594
Making object which uses volume shader invisible will mark the shader
as not having a volume, forcing re-compilation of the shader to bring
it back to a consistent state.
The compilation is happening as part of scene update, which needs to
know kernel features. So there is a feedback loop.
Use more relaxed way of knowing whether there is a volume in the
shader for the kernel features, which doesn't require shader to be
compiled first.
Solves issues from the report, but potentially causes extra memory
allocated if the volume part of graph is fully optimized out. This
downside is solvable, but would need to split scene update into two
steps (the one which requires on kernel, and the one which does not).
It will be an interesting project to tackle, but for a bug fix is
better to use simpler solution.
There was an optimization to remove duplicate storage of normals as attributes
when using normal maps. However for named attributes like this we still need to
store the attribute.
Don't request normal attribute from the normal map node now, instead of skipping it
in the geometry code.
When a new scene is created, the paint pointers are not available before using them, so the python panel exits because the pointer was None.
Now, the pointer is checked in order to display the materials panel as expected.
This commit adds to ID struct a new optional 'weak reference' to a
linked ID (in the form of a blend file library path and full ID name).
This can then be used on next append to try to find a matching local ID
instead of re-making the linked data local again.
Ref. T90545
NOTE: ID re-use will be disabled for regular append for the time being
(3.0 release), and only used for assets. Therefore, this commit should
not change anything user-wise.
Differential Revision: https://developer.blender.org/D12545
This node can be used to fillet splines at control points to
create a circular arc.
The implementation roughly follows T89227's design.
The node works in two main modes: Bezier and Poly
* Bezier: Creates a circular arc at vertices by changing
handle lengths (applicable only for Bezier splines).
* Poly: Creates a circular arc by creating vertices (as
many as defined by the Count fields input) along
the arc (applicable for all spline types).
In both modes, the radius of the created arc is defined
by the Radius fields input.
The Limit Radius attribute can be enabled to prevent
overlapping when the defined radius exceeds the maximum
possible radius for a given point.
Reviewed By: Hans Goudey
Differential Revision: https://developer.blender.org/D12115
The old modifier had two modes, but it is better to keep separated as meshes.
The UI has changed to be more consistent, including a new column type of modifiers.
Note: The logic has not changed with the previous version of the modifier, just is a split on two modifiers..
Reviewed By: mendio, pablovazquez
Differential Revision: https://developer.blender.org/D12586
Samples count pass is normalized to the overall number of samples.
This means that we need to store actual value of the samples in the
tile buffer file.
A bit annoying to pull all those settings to BufferParams and need
to find a more generic solution, but for now this is easiest and a
quickest solution.
Differential Revision: https://developer.blender.org/D12597
Adds a new operator to the pose slider tools that blends the
current pose with the neighbouring poses in the timeline.
The operator can be called in pose mode with Shift+Alt+E
or from the "pose" menu under "In betweens/Blend to Neighbour"
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D9137#inline-105214
Ref: D9137
Outliner tree building code abuse the `ID.newid` pointer to store non-ID
data. While this is bad and should be fixed at some point, for the time
being at the very least do not use ID BKE API to deal with this pointer
in that specific case, this needs its own proper code.
Reported by Thomas DInges: the default cube render in Cycles has jagged
edges during rendering. Happens on AMD Radeon RX 5500 XT.
Force linear interpolation at zoom level 1 and less.
Reviewed by @fclem
Initializing the description property was completely forgotten.
It also seems it may be missing sometimes, so use `get`.
Also, clean values when there is no data, and correctly use
the return value of `get_value_eval` in one instance.
Several areas within blender can benefit a JSON reader/writer library.
Areas like the asset browser, XR and grease pencil.
After looking at the available options we selected nlohmann's JSON for
modern C++ library. It is actively maintained for over 10 years and
flexible.
This patch only adds the header only implementation of the library so it
can be used by different areas. The asset browser project is planning to
add a small abstraction layer so it will be easier to switch between
several different serialization formats. This is currently in
development in D12544.
In cases the abstraction layer can be an overhead and undesired to be used.
In this case the header file can be directly included.
Reviewed By: Severin
Maniphest Tasks: T91430
Differential Revision: https://developer.blender.org/D12567
Up lower clamp on spec_angle to prevent NaN from being generated on intel GPUs at low roughness.
Fixes T88754
Reviewed By: fclem
Maniphest Tasks: T88754
Differential Revision: https://developer.blender.org/D12508
The XR_MSFT_controller_model OpenXR extension provides a glTF
controller model that can be displayed to users during a VR session.
There are plans to support this in D10948, which will greatly improve
VR immersion when using a compatible OpenXR runtime.
TinyGLTF (https://github.com/syoyo/tinygltf) was agreed upon as a
simple and sufficient solution for loading this glTF controller model,
which will be performed at the GHOST abstraction layer. Although by
default it has two additional dependencies, stb and json, stb can be
excluded by defining TINYGLTF_NO_STB_IMAGE and
TINYGLTF_NO_STB_IMAGE_WRITE whereas json will be added as a separate
extern lib in D12567.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D12344
This commit adds a field input node that outputs the fraction of the
total length of the spline on each control point. This is useful for
anything that involves varying a value depending on how far along
the spline it is.
It also works when evaluated on the spline domain, where it outputs
the fraction of the total length of all of the splines at the start.
The operation isn't as well defined for NURB splines for the reasons
noted in the code comment. That can be said explicitly in the docs.
Differential Revision: https://developer.blender.org/D12548
This commit adds warning messages to "legacy" nodes that will be
removed in the future. The warning is shown in the node header, but
it is not printed in the terminal or displayed in the modifier. It is
also not propogated to node groups, but that is a more general task.
If the modifier's node tree has executed a deprecated node, it will
display a warning and a "Search" button that will select the nodes and
pan to them in the node editor. This doesn't open child node trees and
select nodes in there, because I want to keep this operator simple and
avoid wasting a lot of time perfecting this behavior.
Differential Revision: https://developer.blender.org/D12454
Rename the `UUID` struct to `bUUID`. This avoids a symbol clash on
Windows, which also defines `UUID`. This only pops up when a `UUID`
field is used in the DNA code, which is why it wasn't a problem before
(it will be once D12589 lands).
No functional changes.
With this commit, each referenced instance data will be converted to
a geometry instances and processed separately. This should result in
a large speedup when the instances component has many insances
referring to the same data.
This change can act as a blueprint for other nodes that need to
implement similar behavior. It adds some helper functions on the
instances component to make that easier.
Thanks to Erik Abrahamsson for a proof of concept patch.
Differential Revision: https://developer.blender.org/D12572
This patch adds four new nodes to a new "Text" category:
- String Length: Outputs length of a string
- String Substring: Outputs part of a string
- Value to String: Converts a value to a string
- String Join: Concatenates multiple strings with a delimiter
The initial use case of these nodes is the upcoming string to curve
node. However, they could also be used to calculate dynamic attribute
names, or with string attributes in the future.
Differential Revision: https://developer.blender.org/D12532
This node outputs the direction vector, or tangent of a curve at every
control point. For poly splines this is simply the evaluated tangents,
so it all works very simply. For Bezier splines it uses the tangent at
the evaluated point corresponding to each control point, and NURBS
are interpereted as poly splines built from their control points.
Internally the node is called "Input Tangent" to simplify using it for
mesh tangents as well in the future like the "Normal" node.
Differential Revision: https://developer.blender.org/D12581
Currently, the drop indicator colors are hardcoded to white text on semi-transparent black background.
This patch makes the drop indicator use the tooltip theme settings, as they serve a similar purpose.
{F10530482, size=full}
All built-in themes seem to work well and got improved readability.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D12588
rB8e21d528cab98 neglected to add versioning to add the new
"use_attribute" and "attribute_name" properties to the modifier input
list. Though they are added if the modifier's interface is updated, that
doesn't happen when the file is loaded, so patch adds them manually.
Another solution would be calling `MOD_nodes_update_interface`,
but that would require including the modifiers module.
Differential Revision: https://developer.blender.org/D12535
I plan to use this for curve object data conversion to mesh in D12533,
and possibly for the implicit curve to mesh conversion in the curve
and text object modifier stack in the future.
Differential Revision: https://developer.blender.org/D12585
The versioning has to have different behavior for when the old default
value had a float type rather than a double type. Also use memcpy
rather than dupalloc, since it's a bit clearer.
It is valid to e.g. copy construct an integer in the same place,
because it is a trivial type. It does not work for types like std::string.
This fixes a crash reported in D12584 where it would copy a buffer
into itself. We should probably also avoid doing this copy alltogether
but that can be done separately.
Extend the stroke following an approximated circluar/helical curve.
This can be used as an effect for lineart or on its own as helix generator.
Reviewed By: Sebastian Parborg (zeddb), Hans Goudey (HooglyBoogly), YimingWu (NicksBest), Antonio Vazquez (antoniov), Henrik Dick (weasel)
Differential Revision: https://developer.blender.org/D11668
# 请为您的变更输入提交说明。以 '#' 开始的行将被忽略，而一个空的提交
# 说明将会终止提交。
#
# 位于分支 master
# 您的分支与上游分支 'origin/master' 一致。
#
# 要提交的变更：
# 修改： source/blender/blenkernel/BKE_gpencil_geom.h
# 修改： source/blender/blenkernel/intern/gpencil_geom.cc
# 修改： source/blender/gpencil_modifiers/intern/MOD_gpencillength.c
# 修改： source/blender/makesdna/DNA_gpencil_modifier_defaults.h
# 修改： source/blender/makesdna/DNA_gpencil_modifier_types.h
# 修改： source/blender/makesrna/intern/rna_gpencil_modifier.c
#
The issue was caused by `textureSize()` returning the size of the level 0
even when the min texture level is higher than 0.
Using a uniform to pass the correct size fixes the issue.
This issue also affected the downsampling of radiance for reflections and
refractions.
This does not affect anything other than the recusive downsampling shaders.
This includes much improved GPU rendering performance, viewport interactivity,
new shadow catcher, revamped sampling settings, subsurface scattering anisotropy,
new GPU volume sampling, improved PMJ sampling pattern, and more.
Some features have also been removed or changed, breaking backwards compatibility.
Including the removal of the OpenCL backend, for which alternatives are under
development.
Release notes and code docs:
https://wiki.blender.org/wiki/Reference/Release_Notes/3.0/Cycleshttps://wiki.blender.org/wiki/Source/Render/Cycles
Credits:
* Sergey Sharybin
* Brecht Van Lommel
* Patrick Mours (OptiX backend)
* Christophe Hery (subsurface scattering anisotropy)
* William Leeson (PMJ sampling pattern)
* Alaska (various fixes and tweaks)
* Thomas Dinges (various fixes)
For the full commit history, see the cycles-x branch. This squashes together
all the changes since intermediate changes would often fail building or tests.
Ref T87839, T87837, T87836
Fixes T90734, T89353, T80267, T80267, T77185, T69800
Draw thumbnails as strip overlay. This works for movie and image strips.
To draw thumbnails, this overlay has to be enabled and strips must be
tall enough.
The thumbnails are loaded from source file using separate thread and
stored in cache.
Drawing code uses only images stored in cache, and if any is missing,
background rendering job is started. If job can not render thumbnail,
to prevent endless loop of creating job for missing image it sets
`SEQ_FLAG_SKIP_THUMBNAILS` bit of `Sequence` flag.
To prevent visual glitches during timeline panning and zooming, `View2D`
flag `V2D_IS_NAVIGATING` is implemented. If bit is set, drawing code
will look for set of evenly distributed thumbnails that should be
guaranteed to exist and also set of previously displayed thumbnails.
Due to volatile nature of cache these thumbnails can be missing anyway,
in which case no new thumbnails will be drawn for particular strip.
Cache capacity is limited to 5000 thumbnails and performs cleanup of
non visible images when limit is reached.
ref T89143
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D12266
Add tools for image manipulation in sequencer preview region.
This includes:
- Translate, rotate and resize operators, tools and gizmos
- Origin for image transformation
- Median point and individual origins pivot modes
- Select and Box select operator works in preview
- Image overlay drawing
ref T90156
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12105
This is used to find a valid collection in which to instantiate stray
objects and collections.
In some cases there will be no such active view layer, in which case we
can consider using the Scene's master collections children hierarchy
instead to find a valid instantiated parent collection for those stray
data.
With the LMB select key-map some tools required clicking on a gizmo.
With this preference it's possible to hold Alt and click anywhere.
Addresses T83689.
Expose a key-map preference "Fallback Tool (RMB)",
disabled by default.
The right mouse button uses the fallback tool
(currently visible selection tool in the toolbar),
instead of always tweaking.
When any selection tool is active, right mouse always tweaks.
To enable fallback selection on RMB, set the "Right Mouse Select Action"
to "Selection Tool".
Internal changes:
- Add fall-back key-maps, separate key-maps needed for when the tool is
run as a fall-back. This is needed so RMB-select can support fall-back
tools, so left-mouse can be used when it's the active tool and RMB
can be used as a fall-back action when another tool is active.
- Add options field to tools so tools without gizmos can enable the
full-back tool keymap.
- Support multiple key-maps for keymap handlers.
- Fall-back keymaps now co-exist with the tool-keymaps.
So both keymaps may be active at once - using different mouse buttons.
When gizmos are in use, a highlighted gizmo prioritizes the
tool-keymap over the fall-back keymap.
Resolves T83690.
Reviewed By: JulienKaspar
Ref D12493
Some selection operators return (PASS_THROUGH & FINISHED) so the tweak
event isn't suppressed from the PRESS event having been handled.
This is now restricted to events with a PRESS action.
Without this, using CLICK for selection was passing the event through
which could run other actions unintentionally.
This node allows sampling positions, tangents, and normals at any
arbitrary point along a curve. The curve can include multiple splines,
all are taken into account. The node does not yet support transferring
generic attributes like radius, because some more general tooling will
make that much more feasible and useful in different scenarios.
This is a field node, so it is evaluated in the context of a data-flow
node like "Set Position". One nice thing about that is it can easily
be used to move an entire geometry like the follow path constraint.
The point along the curve is chosen either with a factor of the total
length of the curve, or a length into the curve, the same choice used
in the curve trim node.
Differential Revision: https://developer.blender.org/D12565
This nodes evaluates a field on a geometry and outputs various
statistics about the entire data set, like min, max, or even
the standard deviation. It works for float and vector types currently,
though more types could be supported in the future.
- All statistics are calculated element-wise for vectors.
- "Product" was not added since the result could very easily overflow.
- The "Size" output was not added since it isn't specific to an
attribute and would fit better in another node.
The implementation shares work as much as possible when multiple
statistics are needed.
This node has been in development since the beginning of this year,
with additions from Johnny Matthews and Hans Goudey.
Differential Revision: https://developer.blender.org/D10202
There may be mode specific panels for some assets in the navigation or
the asset metadata sidebar. For example the pose library will likely do
this. So let the regions redraw on mode changes.
This change makes the Set Position node do nothing by default.
Before, the geometry would always disappear, because it all points
would be moved to (0, 0, 0).
Differential Revision: https://developer.blender.org/D12553
Change of File Browser "Favorites" section header in source list
(T panel) to "Bookmarks" to maintain consistency with all the other
bookmark-related text and operations.
See D10262 for more information and alternatives considered.
Differential Revision: https://developer.blender.org/D10262
Reviewed by Julian Eisel
"iff" was intended as "if and only if". while exact use of abbreviations
isn't clear cut, I assumed this was a typo & it's not used anywhere
else in source/, expand to "only if" (suggested by Sybren).
This makes the Noise Texture node available in geometry nodes.
It should behave the same as in shader node, with the exception
that it does not have an implicit position input yet. That will
be added separately.
Differential Revision: https://developer.blender.org/D12467
Previously, the node would always realize instances implicitly.
Now it can change the position of entire instances.
The Realize Instances node can be used before if the old
behavior is required.
Differential Revision: https://developer.blender.org/D12555
Issue revealed by rB546314fc9669 change, also error itself exited before
that commit.
Now we do accept git command to fail when trying to checkout the
specified branch from sub-modules, and only actually error in case the
fall-back branch (aka master) cannot be properly checked out.
Thanks fot Ray molenkamp (@LazyDodo) for report and initial patch
(D12560).
This node has a simple geometry input and output.
If the input geometry contains instances, they will be realized
into actual geometry. When there are many instances, this can
be very slow and memory intensive. Generally, instances should
only be made real when necessary, e.g. when every instance
should be deformed independently.
Differential Revision: https://developer.blender.org/D12556
On Apple machines, call `clock_gettime()` instead of `timespec_get()`.
macOS only introduced `timespec_get()` in version 10.15 (introduced
approx two years ago, so in 2019), even though the function is from C11.
XOR the 'seconds' and 'nanoseconds' fields of the current time to seed the
RNG used for generating random UUIDs. This ensures a better seed just in
case the clock as no sub-second resolution.
The API was checking the number of total weights with the first point of the stroke and this was not valid because each point can have different number of weight elemnts,
The case that checked whether there were evaluated edges was incorrect,
since two points are needed for an edge. Then also avoid running the
accumulation for an empty span.
It's equivalent to the OpenImageDenoise prefiltering option in Cycles.
See D12043.
Prefilter modes:
- None: No prefiltering, use when guiding passes are noise-free.
- Fast: Denoise image and guiding passes together. Improves quality when
guiding passes are noisy using least amount of extra processing time.
- Accurate: Prefilter noisy guiding passes before denoising image.
Improves quality when guiding passes are noisy using extra
processing time.
Reviewed By: #compositing, jbakker, sergey
Differential Revision: https://developer.blender.org/D12342
The enum called "interpolate" was really a choice of methods for mapping
inputs to positions on the curve, whereas the "sample" enum was used to
define a way to create a whole set of new points from the curve, without
any input parameters. The "re-sample" vs. "sample" naming makes that
distinction better.
On the blender side this commit fixes importing video files with audio
and video streams that do not share the same start time and duration.
Differential Revision: https://developer.blender.org/D12353
After new AUD API changes from 2.8x what "buffer" function used to do
has now become "cache" function (it caches a sound into RAM). Therefore,
the basic aud example should call this new "cache" function instead of
"buffer" function.
Thanks to Michael-Z-Freeman for pointing out.
since `AssetHandle` does not have a `name_property`
(`RNA_def_struct_name_property`), and the UIList is just using the
default `uilist_filter_items_default` it simply cannot filter on names
(`RNA_struct_name_get_alloc` wont succeed).
Adding a name_property also wont work since `AssetHandle` inherits
`PropertyGroup` (which already sets name_property).
So this adds a (temporary) hack exception for RNA_AssetHandle in
uilist_filter_items_default until the design of `AssetHandle` progresses
further.
thx @Severin for additional feedback
Maniphest Tasks: T91461
Differential Revision: https://developer.blender.org/D12541
This patch allows Asset Browser previews to be made regardless
of the setting of the (unrelated) "File Preview Type" Preference.
See D12484 for more details.
Differential Revision: https://developer.blender.org/D12484
Reviewed by Julian Eisel
Use the inverse of the grease pencil object. This patch fixes the issue for bones and objects.
Maniphest Tasks: T91481
Differential Revision: https://developer.blender.org/D12539
Add `BLI_uuid` and `DNA_uuid_types.h` with a UUID implementation
following RFC4122 (https://datatracker.ietf.org/doc/html/rfc4122.html).
The following features are implemented:
- A struct of 128 bits that can be used in DNA definitions.
- Generation of version 4 UUIDs, that is, purely random ones.
- UUID equality function.
- String to UUID and UUID to string conversion functions that are
compatible with RFC4122.
- C++ stream operator that outputs the UUID as string.
This UUID will be used by the asset system, to uniquely identify asset
catalogs.
Reviewed By: Severin, jacqueslucke
Differential Revision: https://developer.blender.org/D12475
When using FModifier `Restrict Frame Range`, the resulting influence was
zero being exactly on `Start` / `End` range borders (so borders were
**exclusive**).
This made it impossible to chain FModifers together (forcing the user to
specify values slightly below the desired border in following
FModifiers).
This is now corrected to be **inclusive** on Start / End range borders.
Before
{F10234864}
After
{F10234865}
Testfile
{F10234866}
In the case of touching open borders (so [frame A frame B] followed by
[frame B frame C]) both modifiers are evaluated (in stack order).
If the later modifier has full influence (and is not additive) this simply
means the result is the same as the later modifier's value.
If influences below 1 are used (or modifiers are additive) both modifier's
values are interpolated/added accordingly.
technical notes:
- this was caused by the introduction of FModifier Influence/BlendIn-Out
in rB185663b52b61.
- for comparison, see other occurrences of
`FMODIFIER_FLAG_RANGERESTRICT`.
- the following conditions in `eval_fmodifier_influence` for blend in/
out have been changed accordingly.
Maniphest Tasks: T85564
Differential Revision: https://developer.blender.org/D10401
Change KeyMapItem.alt/ctrl/shift/oskey to integer types,
where -1 is used to ignore the modifier when matching key-map items.
It was only possible to set all modifiers to -1 at once from RNA
using the 'any' property.
Afterwards individual modifiers could be set back to true/false.
Although these key-map items could not be exported/imported.
Exposing the values directly avoids the need for cumbersome workarounds.
These were added in a1c8543f2a (2007)
but never used.
Nor did they have any meaning in practice.
Note that versioning keymap items isn't needed as these values were
never set. The code-paths that set these values also set KM_MOD_FIRST
causing `keymap_event_set` to only ever assign values of 0 or 1.
These flags complicate further exposing KM_ANY (-1)
which is also a valid value for modifiers.
- Show "Lasso Select" in menus (along with Box & Circle select)
- Show "Extrude to Cursor" (along with other extrude actions).
- Rename operators that add/extrude on Ctrl-Click
since their names were inconsistent.
This is mainly for discoverability.
While the screenshot operator showed an "Area" option,
it wasn't usable from the main menu (unless accessed via menu search).
Split screenshot area into an operator that depends on cursor.
Support waiting for input so operators that depend on the
cursor location are usable from menus / buttons.
Use an operator type flag which the user interface code checks for,
waiting for input when run from a menu item.
This patch only supports this feature, there are no functional changes.
The motivation for this change is discoverability since some actions
were either hidden or broken when accessed from menus
(where the behavior of the operator depended on the menu location).
In general, waiting for input is *not* an efficient way to access tools,
however there are over 50 operators with a "wait_for_input" property
so this isn't introducing a new kind of interaction,
rather exposing this in a way that does not need to be hard-coded into
each operator, or having modal callbacks added for the sole purpose
of waiting for input.
Besides requiring boiler plate code using a "wait_for_input" property
has the added down-side of preventing key shortcuts from showing.
Only the menu items will enable the property,
causing them not to match key-map items.
Reviewed By: Severin
Ref D12255
An issue with the previous commit-- the default value of the type was
used instead of the property value when the "use_attribute" property
was missing.
This adds a toggle to node group inputs exposed in the modifier to use
an attribute instead of a single value. When the toggle is pressed, the
button switches to a text button to choose an attribute name. Attribute
search isn't implemented here yet.
One confusing thing is that some values can't be driven by attributes
at all, like the size of a primitive node. In that case, we should have
a node warning, but that will be separate since it's more general.
We can also have an option to turn off this toggle in node group
input settings.
The two new properties for each input are stored with the same name
as the value, but with `"_use_attribute"` and `"_attribute_name"``
suffixes. The properties are not added for socket types that don't
support attribute input, like object sockets.
Differential Revision: https://developer.blender.org/D12504
Adds an "Auto" option to blend thumbnail types that will automatically
use Screenshot if there is no camera and 3dview, or workbench render
with shading settings from the largest 3dview.
See D12407 for more details.
Differential Revision: https://developer.blender.org/D12407
Reviewed by Campbell Barton
This should allow easier changes when it's helpful to use C++ types.
The diff is for a test on the buildbot.
Differential Revision: https://developer.blender.org/D12528
When saving blend files close any menus that might be open, show
"waiting" mouse cursor right away, before creating preview.
See D12507 for more details.
Differential Revision: https://developer.blender.org/D12507
Reviewed by Campbell Barton
This patch allows point and spline attributes to be transferred to the
mesh generated by the curve to mesh node. All dynamic named and
anonymous attributes are transferred. So a user-created attribute will
be transferred, but "radius", "tilt" or the handle position attributes
won't be transferred by default and will need to be copied first.
This trade-off is made for performance, since most of the time, users
won't need these attributes copied.
Generally, attributes are transferred to the point/vertex domain.
However, if they have the same name as a built-in mesh attribute that
only exists on a different domain, like "shade_smooth", then they can
be transferred directly to that domain as well. Conversion directly to
the face corner domain is not necessary because there are no builtin
face corner attributes. I see this conversion directly to other domains
as an optimization we could use behind the scenes in the future as well,
when named attributes are less common.
For performance, I haven't tested which of the following is better:
```
for each spline combination:
for each attribute:
for each attribute:
for each spline combination:
```
For now I used the existing loop to avoid more threading overhead.
Differential Revision: https://developer.blender.org/D12363
Store the optional temporary span storage as a unique_ptr and move
it in the move constructor, to avoid the need to add a special move
constructor that clears the "show_warning" fields from it. Maybe this
is very slightly slower, but we'll need this class less often in the future
anyway.
"App" is a name reserved for the application templates at the moment.
It may become its own term in the near future if Templates are separated
from "Apps".
So since this is a name not exposed to the users we should renamed it
sooner than later.
Note that this will require scripts to update since the name of the
class is renamed here.
This also requires an update in the User Manual.
Differential Revision: https://developer.blender.org/D12523
With this, asset libraries can be directory structures and all assets in
sub-directories will show up in an Asset Browser.
With complex directory structures and many .blend files inside, asset
library reading will be quite slow for now. There's initial work being
done to introduce indexing for this (T82979), other optimizations are
being discussed as well.
Addresses T91406.
Differential Revision: https://developer.blender.org/D12139
The toggle that allow users to "show" the region (header, toolbar, ...)
when it is collapsed can now be configured for the apps.
Note: This option is not visibile in the UI.
Differential Revision: D12516
This breaks API compatibility. However we are now grouping this setting
in the proper section (preferences.apps), so scripts had to update anyways.
So they may as well do it for the final name.
The reason to remove from the UI is that this is intended for app setup,
and as such it should not be exposed to final users until we have apps
better presented (for 3.1 hopefully).
Differential Revision: D12516
There will be other settings that lock other aspects of the
UI layout (e.g., resizing of editors). So better to name
this setting what it actually handles (the corners).
New name: USER_APP_LOCK_CORNER_SPLIT
Differential Revision: D12516
Add needed extra flag and utils to IDType to mark and check an ID type
as only appendable.
Note that this is only a loose user-level enforcement currently, in any
case you need to be able to link an ID to append it currently, so for
low-level code this does not really matter.
Currently only WorkSpace and Screen ID types are marked with the new
`IDTYPE_FLAGS_ONLY_APPEND` flag.
While likely harmless, this code was doing extremely bad thing,
by-passing the whole lower-level `BKE_lib_id_make_local` call in case it
would fail and deciding by itself to forcefully make the given ID local.
Bad. Very, very, very bad.
Callbacks in IDTypeInfo should never affect other IDs if they are not
embedded.
We break this rule in some cases, at least each of those should be
clearly commented about and get some security checks to try to avoid
unexpected issues as much as possible.
Mixing testing and actual action in a single function is just not a good
way to do things, and the 'testing' feature is not used anywhere
anymore, time to get rid of it.
This flag became a full duplicate of `IDTYPE_FLAGS_NO_LIBLINKING`, which
is a good thing (don't think we ever want to be able to link some data,
without being able to make it local...).
So we can now remove it and use `IDTYPE_FLAGS_NO_LIBLINKING` instead.
Toggling the selection off in the node is the same as muting it,
so exposing it there doesn't help, and makes it less clear that it's
meant to be used as a field.
This moved the spline reversing logic out of the Curve Reverse geometry
node and into the spline class. This allows a spline to reverse itself
with a call to `my_spline.reverse()`
The base class will reverse position, radii & tilt, while specialized
versions are created for Bezier and Nurbs splines to reverse the
additional data that these classes encapsulate.
Differential Revision: https://developer.blender.org/D12501
Essentially, Workspace (and Screen) types were defined as not
localizable.
In previous code it happended to work by mere chance (code path taken in
`BKE_library_make_local` was conviniently skipping the call to
`BKE_lib_id_make_local` in that case, hence not checking for
`IDTYPE_FLAGS_NO_MAKELOCAL` flag of the localized ID type).
This is a total abuse of this IDType flag, for now removing it.
That specific case (IDtype appendable but nor linkable) requires its own
proper flag, this will be tackled in a later commit.
Issue introduced in rB3be5ce4aad5e.
Scene and related pointer parameter can be NULL in link/append code, in
which case there is no instantiation of new objects/collections/obdata.
Link code in blendloader was already checking that, new instantiation
code in WM area from yesterday did not.
Issue introduced by rB3be5ce4aad5e.
Add a method that allows a MutableSpan to reverse itself. This reverses
the data in the original span object. This is a first step in extracting
some functionality from nodes and making it more general.
Differential Revision: https://developer.blender.org/D12485
This commit moves the old material nodes to a "legacy" folder and adds
versions of the nodes that work with fields.
The "Select by Material" node is a field node now, so it doesn't have
a geometry output. This is an improvement because there are fewer links
to connect, and it's more easily usable in different situations.
It's also called "Material Selection", since it's more of an input
than an action now.
It's sometimes necessary to use the attribute capture node to get a
more predictable interpolation to mesh faces. This is because the
selection field input is always evaluated on the face domain, so
attribute inputs are interpolated before they are booleans, so they
cannot use the new interpolations from rB5841f8656d9580d7b9.
Differential Revision: https://developer.blender.org/D12456
The generic domain interpolation algorithms didn't quite work for
selections. The interpolation would do unexpected things that
were different than the results in edit mode. The new behavior
is supposed to be the same as edit mode, although we also have
to handle face corner selections here.
Currently the code assumes that all boolean attributes should be
handled that way. I'm not sure of why that wouldn't be the case,
but if we ever need non-selection boolean attributes, that could
be supported too.
Differential Revision: https://developer.blender.org/D12488
This is a needed change for the viewport compositor. The compositor
needs to draw to `dtxl->color` to have correct overlay / background
composition.
The solution here is to have a separate buffer that keeps the first
sample we blend from. This increases VRAM usage but it is the most
elegant option.
This commits adds a few common flags to `SocketDeclaration`
so that they are available for all socket types (hide label, hide
value, is multi input). This allows porting over the remaining
geometry nodes to the new declaration system.
Furthermore, this commit separates the concepts of the socket
declaration and corresponding builders. The builders are used
by nodes to declare which sockets they have (e.g. `FloatBuilder`).
The ready build socket declarations can then be consumed by
other systems such as the versioning code. Both use cases
need different APIs and those will change for independent reasons,
so it makes sense to separate the classes.
This allows a hack to be removed that temporarily overwrote
the 3D views gizmo display flag.
Also reverse change from fb27a9bb98
that runs poll on modal gizmo groups as there is some risk
that the poll function unlinks the gizmo.
In {rB9cff9f9f5df0} asset_library was renamed → asset_library_ref.
Missed to update this in assets.py.
Differential Revision: https://developer.blender.org/D12497
This adds a new `ParallelMultiFunction` which wraps another multi-function
and evaluates it with multiple threads. The speeds up field evaluation
quite a bit (the effect is most noticeable when the number of evaluations
and the field is large).
There are still other single-threaded performance bottlenecks in field
evaluation that will need to be solved separately. Most notably here
is the process of copying the computed data into the position attribute
in the Set Position node.
Differential Revision: https://developer.blender.org/D12457
Follow up to fix for T73684,
which allowed some modal gizmos to hide all others.
Also resolve an issue from 917a972b56
where shear the shear gizmo would be visible during interaction.
Internally there are some changes to gizmo behavior
- The gizmo with modal interaction wont draw if it's poll function fails.
- The WM_GIZMOGROUPTYPE_DRAW_MODAL_ALL flag now causes these gizmo
groups to draw when another group is being interacted with.
Create dot-dash effect for grease pencil strokes. User can manually edit the length, gap and styles for each segment of dashed lines.
The values in each segment can all be key-framed to make animations.
Reviewed By: Hans Goudey (HooglyBoogly), Antonio Vazquez (antoniov)
Differential Revision: http://developer.blender.org/D11876
This allows crease lines to be automatically hidden on smooth surfaces, also provided options for:
- Showing crease on marked sharp edges.
- Force crease detection on smooth surfaces.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: http://developer.blender.org/D12051
A temporary string was created in the attribute_foreach callback
and used in a map at a higher scope. When the callback finished,
the string went out of scope, was freed, then the elements in the
set pointed to freed memory.
After applying the pose breakdowner,
the "factor" slider in the redo panel wasn't set to the correct value
This would cause the pose to jump around
once you start dragging the slider
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D12187
Ref: D12187
This commit fully refactors the way linked IDs are made local when
appended.
Previously, `BKE_library_make_local` was (ab)used for this task, but it
was missing some contextual data and doing complex processing to try to
work around this, with limited sucess. Further more, it was nearly
impossibe to extend (e.g. to get new append behaviors necessary for the
asset project).
The new code is a dedicated append step in WM linking process.
NOTE: BPY API (`libray.load()` context manager) uses its own code here,
which still relies on `BKE_library_make_local` for appending.
Unfortunately, merging those two different code paths is not trivial so
for now this API will remain unchanged.
Fix T55629: Append already linked Data is impossible.
Current `BKE_libblock_relink_to_newid` is using its own simplistic,
limited and not really correct version of ID remapping.
While doing a full replacement would have been ideal, this is
risky/time-constrained for Blender 3.0 release, so for now we'll have
both versions co-existing.
Previously, it was necessary to rebuild the node declaration
every time it was used. Now it is cached per node for easy
and fast access.
For more details on what this is, look at the comment in
`DNA_node_types.h`.
Differential Revision: https://developer.blender.org/D12471
Previously, a debug name had to be passed to all methods
that added a resource to the `ResourceScope`. The idea was
that this would make it easier to find certain bugs. In reality
I never found this to be useful, and it was mostly annoying.
The thing is, something that is in a resource scope never leaks
(unless the resource scope is not destructed of course).
Removing the name parameter makes the structure easier to use.
Sometimes not all outputs of a multi-function are required by the
caller. In those cases it would be a waste of compute resources
to calculate the unused values anyway. Now, the caller of a
multi-function can specify when a specific output is not used.
The called function can check if an output is unused and may
ignore it. Multi-functions can still computed unused outputs as
before if they don't want to check if a specific output is unused.
The multi-function procedure system has been updated to support
ignored outputs in call instructions. An ignored output just has no
variable assigned to it.
The field system has been updated to generate a multi-function
procedure where unused outputs are ignored.
In contrast to the Filebrowser, the Outliner (Blender File view) did not
distinguish icons for text-based formats (if they have a filepath this
can be done though).
Maniphest Tasks: T90862
Differential Revision: https://developer.blender.org/D12347
This allow users to show/hide:
* Library name / refresh.
* Assets names.
* Filter.
To set them in Python use:
display_options={'NO_NAMES', 'NO_FILTER', 'NO_LIBRARY'}
With contributions by Julian Eisel.
Differential Revision: https://developer.blender.org/D12476
Curve Points of handle of type `Auto` on curves not uniformly scaled
cause the shape of the curve to be modified after applying the scale.
So change these handles to `Aligned` in these cases.
Reviewed By: campbellbarton
Maniphest Tasks: T90736
Differential Revision: https://developer.blender.org/D12281
Changing active side was introduced in {rB7ff6bfd1e0af} but was never
working for tools/operators other than the sculpt line mask tool.
While for most tools/operators this actually does not make sense, the
bisect tool/operator can actually benefit from it.
thx @campbellbarton for additional input!
Maniphest Tasks: T91320
Differential Revision: https://developer.blender.org/D12473
This was implemented in {rB14d56b4217f8} but was never working for
tools/operators other than the sculpt line mask tool.
To be precise, the preview actually snapped but the operations (e.g.
mesh bisect, vertex weight gradient) still happened "unsnapped" in
modal. For the sculpt line mask tool this wasnt a problem, because it
only draws a preview while modal, the actual mask was only applied
later.
This solves part one of T91320 (snapping), sculpting also introduced
flipping in {rB7ff6bfd1e0af} which does not make much sense for all
tools, but in bisect this could actually be supported, will add that in
a separate Diff.
ref T91320
Maniphest Tasks: T91320
Differential Revision: https://developer.blender.org/D12470
* Splash Disable
* Show gizmo navigate
* ui scale
It is a bit arbritrary now. So those are the flags I'm
setting up for the Blender 101 project (T90025).
Differential Revision: https://developer.blender.org/D12474
Introduced `BKE_packedfile_unpack` that is called from the specialized
implementation for Image, Sound, Font, Volume etc. This is in
preparation for T91252.
Instead of comparing the referenced field node by pointer,
compare the nodes directly instead. This is important
because different field nodes might be the same semantically.
rB546314fc9669 broke `svn_libraries_base_url` utils API compatibility
for no good reasons, making new `branch` argument explicitely optional.
Reported on chat by Michael Kowalski (@makowalski), thanks!
Creating some primitives allows for a scale value (via python) that will
scale the object accordingly. For objects with a radius parameter
(like cylinders, spheres, etc.) passing a scale different to (1,1,1)
would result in unexpected behavior.
For example:
`>>> bpy.ops.mesh.primitive_uv_sphere_add(radius=2, scale=(1,1,2))`
We would expect this to create a sphere with a radius of 2
(dimensions 4,4,4) and then be scaled *2 along the z-axis
(dimensions 4,4,8). But this would previously create a scaled sphere
with dimensions (2,2,4).
The scale was simply divided by two. Maybe because the "radius"
parameter for creating the primitives was confusingly named "diameter"
(but used as the radius).
The fix adds a scale parameter to `ED_object_new_primitive_matrix`
and also renames the wrongly named "diameter" parameters to "radius".
Reviewed By: campbellbarton
Maniphest Tasks: T84638
Ref D10093
With this commit, curve objects support the geometry nodes modifier.
Curves objects now evaluate to `CurveEval` unless there was a previous
implicit conversion (tessellating modifiers, mesh modifiers, or the
settings in the curve "Geometry" panel). In the new code, curves are
only considered to be the wire edges-- any generated surface is a mesh
instead, stored in the evaluated geometry set.
The consolidation of concepts mentioned above allows remove a lot of
code that had to do with maintaining the `DispList` type temporarily
for modifiers and rendering. Instead, render engines see a separate
object for the mesh from the mesh geometry component, and when the
curve object evaluates to a curve, the `CurveEval` is always used for
drawing wire edges.
However, currently the `DispList` type is still maintained and used as
an intermediate step in implicit mesh conversion. In the future, more
uses of it could be changed to use `CurveEval` and `Mesh` instead.
This is mostly not changed behavior, it is just a formalization of
existing logic after recent fixes for 2.8 versions last year and two
years ago. Also, in the future more functionality can be converted
to nodes, removing cases of implicit conversions. For more discussion
on that topic, see T89676.
The `use_fill_deform` option is removed. It has not worked properly
since 2.62, and the choice for filling a curve before or after
deformation will work much better and be clearer with a node system.
Applying the geometry nodes modifier to generate a curve is not
implemented with this commit, so applying the modifier won't work
at all. This is a separate technical challenge, and should be solved
in a separate step.
Differential Revision: https://developer.blender.org/D11597
Calms warning for unused variable in `constraint_copy_to_selected_poll`
by using UNUSED_VARS.
See D12453 for further details
Differential Revision: https://developer.blender.org/D12453
Reviewed by Campbell Barton
Since fields were committed to master, socket inspection did
not work correctly for all socket types anymore. Now the same
functionality as before is back. Furthermore, fields that depend
on some input will now show the inputs in the socket inspection.
I added support for evaluating constant fields more immediately.
This has the benefit that the same constant field is not evaluated
more than once. It also helps with making the field independent
of the multi-functions that it uses. We might still want to change
the ownership handling for the multi-functions of nodes a bit,
but that can be done separately.
Differential Revision: https://developer.blender.org/D12444
Now an instruction knows the cursors where it is inserted instead
of just the instruction that references it. This has two benefits:
* An instruction knows when it is the entry instruction.
* The cursor can contain more information, e.g. if it is linked to the
true or false branch of a branch instruction.
This also simplifies updating the procedure in future optimization
passes.
Mostly renaming the variables to improve line wrapping.
But also the "foreach_attribute" loops look simpler now.
Also use `Spline::copy_base_settings` and don't bother
with an extra call to reallocate the attribute arrays.
Just like the curve to points node, this mode outputs point locations
based on the input curve's evaluated points (the points you see in the
viewport). This is expected to be faster, since it doesn't have to
sample equal positions on the result, and it's also consistent with
the existing choices in the curve to points node.
Improvements to Quad View options' titles and descriptions.
See D12381 for more details.
Differential Revision: https://developer.blender.org/D12381
Reviewed by Hans Goudey and Campbell Barton
rBe2f99c338bd57 should have used the subversion currently defined
in Blender, instead it used one lower, so some files didn't have the
versioning applied.
It appears an old version of this file was committed by accident. The
intended change to remove sculpt layers was done in versioning code and
does not require a modified startup.blend.
Flag the changed object and its bones to update after moving a
constraint in the stack up or down. The two operators for move up and
move down seem to be unused, but I notices they had the same problem, so
I added the update there as well.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D12174
Refactor of our Vfont check for font validity.
See D12068 for further details.
Differential Revision: https://developer.blender.org/D12068
Reviewed by Campbell Barton
Recently we have decided to avoid fancier versioning for nodes with
string inputs for attribute names when updating the attribute workflow
for 3.0. In that case we would just duplicate any node that will
have an updated version to work with fields.
We want to be able to use the "proper" ID names for the new versions
of the nodes though, so this patch adds "Legacy" to the IDs of all
nodes that will be replaced in 3.0. This commit also removes the nodes
from the add menu when the fields experimental preference is enabled,
in order to make it clear what has been updated and what hasn't.
Nodes in the "Maybe" categories in versioning_300.c can be renamed
later if necessary. For now it's probably better to be conservative,
and to keep the list complete.
Differential Revision: https://developer.blender.org/D12420
Previously fluid simulation and Alembic modifiers had a dedicated function
to query the velocity for motion blur. Now use a more generic system where
those modifiers output a velocity attribute.
Advantages:
* Geometry and particle nodes can output velocity through the same mechanism,
or read the attribute coming from earlier modifiers.
* The velocity can be preserved through modifiers like subdivision surface or
auto smooth.
* USD and Alembic previously only output velocity from fluid simulation, now
they work with velocity from other sources too.
* Simplifies the code for renderers like Cycles and exporters like
Alembic and USD.
This breaks compatibility:
* External renderers and exporters accessing these velocities through the
Python API now need to use the attribute instead.
* Existing modifier node setups that create an attribute named "velocity"
will render differently with motion blur.
Differential Revision: https://developer.blender.org/D12305
Use `_PyThreadState_UncheckedGet()` to check that the current thread is
tracked by Python before checking whether it has the GIL. The latter
will abort when the former is false.
For some reason the asset preview isn't created or loaded correctly in
some instances. This could be addressed with D9974, but hard to tell
since I only have a failing .blend file, no steps to recreate it from
scratch.
Would crash when opening an Asset Browser, selecting an object asset
(that has an invalid preview stored) and opening the Asset Browser
sidebar, so that the preview is visible there.
This enabled multithreaded building of the keys that needs to be drawn
in the timeline (and other action editors).
On an AMD Ryzen 3800 using a mocap data test file (available in patch)
the performance went from 2fps to 8fps. The performance increase depends
on the number of rows of keyframes that is shown in for example the
timeline editor.
Each row will be using a different thread. Currently the bottleneck is
the summary channel that we could split up in the future even more (
although that is a complex refactoring work).
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D12198
This patch adds new Perlin noise functions to BLI. The noises are compatible
with the shading texture noises in EEVEE, SVM, and OSL.
The existing Jenkins hash functions couldn't be used because they are not
compatible with the shading implementations and an attempt at adjusting the
implementation will break compatibility in various areas of Blender. So the
simplest approach is to reimplement the relevant hashing functions inside the
noise module itself.
Additionally, this patch also adds a minimal float4 structure to use in the
interface of the noise functions.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D12443
Change data structure of keylists. Reducing the balancing overhead and therefore increases performance.
| **Function** | **Master** | **Patch** |
|`draw_summary_channel`| 0.202105s| 0.083874s |
When adding items to the keylist it will store it in a linked list. This linked list is
accompanied with the length (key_len) and a `last_accessed_column`. last_accessed_column is a cursor
that improve the performance when adding new items as they are mostly ordered by frame numbers.
last_accessed_column is reset when a new fcurve/mask/... is added to the keylist.
Before searching or array access. the listbase needs to be converted to an array.
`ED_keylist_prepare_for_direct_access`. After that the caller can use
`ED_keylist_find_*` or `ED_keylist_array*` functions.
The internal array can also be accessed via the `ED_keylist_listbase` function.
The items inside the array link to the previous/next item in the list.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D12052
Evaluating the dependency graph potentially executes Python code when
evaluating drivers. In specific situations (see T91046) this could
deadlock Blender entirely. Temporarily releasing the GIL when evaluating
the depsgraph resolves this.
This is an improved version of
rBfc460351170478e712740ae1917a2e24803eba3b, thanks @brecht for the diff!
Manifest task: T91046
Changed doc string for Blender `--addons` command line argument
to explain what it does rather than just describing what it expects.
Reviewed By: Blendify
Ref D12445
Addresses T76082.
Since the DirectX backend does not work for AMD gpus
(wglDXRegisterObjectNV() fails to register the shared OpenGL-DirectX
render buffer, displaying a pink screen to the user), the original
solution was to use SteamVR's OpenGL backend, which, as tested
recently, seems to work without any issues on AMD hardware.
However, the SteamVR OpenGL backend (on Windows) was disabled in
fe492d922d since it resulted in crashes with NVIDIA gpus (and still
crashes, as tested recently), so SteamVR would always use the
AMD-incompatible DirectX backend (on Windows).
This patch restores use of the SteamVR OpenGL backend for non-NVIDIA
(AMD, etc.) gpus while maintaining the DirectX workaround for NVIDIA
gpus. In this way, issues are still resolved on the NVIDIA side but
AMD users can once again use the SteamVR runtime, which may be their
only viable option of using Blender in VR.
Reviewed By: Julian Eisel
Differential Revision: https://developer.blender.org/D12409
VS2019 had a compiler update moving it into the
range that was used to detect VS2022. This patch
updates the detection to the current VS2022
preview compiler version.
Reported by Jesse Y on chat.
With D12436 two File Browser properties were renamed but two references
not changed in space_filebrowser.py
See D12449 for details.
Differential Revision: https://developer.blender.org/D12449
Reviewed by Hans Goudey
It is causing crashes in rendering, when releasing the GIL in render threads
while the main thread is holding it.
Ref T91046
This reverts commit fc46035117.
Preferences / File Browser section made less confusing.
See D12436 for details and comparisons.
Differential Revision: https://developer.blender.org/D12436
Reviewed by Campbell Barton and Julian Eisel
Reuse temporary windows when they share the same single area type, not
because they share the same title.
See D12401 for more details.
Differential Revision: https://developer.blender.org/D12401
Reviewed by Campbell Barton
This commit allows connecting color sockets to the group input and
changing the input values in the modifier. Before there was an error
since this was more complicated to support with the previous IDProperty
UI data storage method.
Differential Revision: https://developer.blender.org/D12437
This adds support for two Varjo specific OpenXR vendor extensions:
1) XR_VARJO_QUAD_VIEWS
2) XR_VARJO_FOVEATED_RENDERING
Together these enable human eye resolution rendering on supported
devices (currently mainly Varjo XR-3 and VR-3).
In addition, there's a detection for Varjo OpenXR runtime.
This has been tested on real Varjo XR-3 hardware and Varjo Simulator
and confirmed to function correctly. Foveation works, and the views are
rendered correctly for all the four views.
Reviewed By: Peter Kim, Julian Eisel
Differential Revision: https://developer.blender.org/D12229
Evaluating the dependency graph potentially executes Python code when
evaluating drivers. In specific situations (see T91046) this could deadlock
Blender entirely. Temporarily releasing the GIL when evaluating the depsgraph
resolves this.
Calling the `BPy_BEGIN_ALLOW_THREADS` macro is relatively safe, as it's
a no-op when the current thread does not have the GIL.
Developed in collaboration with @sergey
Manifest task: T91046
This implements the initial core framework for fields and anonymous
attributes (also see T91274).
The new functionality is hidden behind the "Geometry Nodes Fields"
feature flag. When enabled in the user preferences, the following
new nodes become available: `Position`, `Index`, `Normal`,
`Set Position` and `Attribute Capture`.
Socket inspection has not been updated to work with fields yet.
Besides these changes at the user level, this patch contains the
ground work for:
* building and evaluating fields at run-time (`FN_fields.hh`) and
* creating and accessing anonymous attributes on geometry
(`BKE_anonymous_attribute.h`).
For evaluating fields we use a new so called multi-function procedure
(`FN_multi_function_procedure.hh`). It allows composing multi-functions
in arbitrary ways and supports efficient evaluation as is required by
fields. See `FN_multi_function_procedure.hh` for more details on how
this evaluation mechanism can be used.
A new `AttributeIDRef` has been added which allows handling named
and anonymous attributes in the same way in many places.
Hans and I worked on this patch together.
Differential Revision: https://developer.blender.org/D12414
rB8cc3d2d6f51f introduced option to force make_local code to either copy
or actually make a linked ID local, but logic of boolean options
handling was broken.
This commit simplifies logic here and fixes the issue.
NOTE: Since those new options were not used yet this was a harmless bug.
Mistake in {rB459974896228}.
To use Object Fonts, (vertex) instancing needs to be enabled.
So bring back the instancing panel and improve the instancing choice
(similar to rB6c0c766bcaa0) by just giving the 'Vertex' choice (or
'None') and explain this is only used for Object Fonts on characters.
Was reported in D11348 itself.
Differential Revision: https://developer.blender.org/D12438
Seems like an oversight in {rB86635402d516}?
Stumbled over this while investigating another report, but this line in
its current form does not make sense (was taking derivedFinal - not
derivedDeform - prior so I assume this has to be
BKE_object_get_evaluated_mesh now).
(it is now only used for vertex parenting where this should not be an
issue, but best keep this generic).
Differential Revision: https://developer.blender.org/D12425
View operations that left the cursor over a gizmo were not being updated
because the mouse-move event was added while the view was animated
instead of once the animation had completed.
Mouse-move events were also missing when smooth-view was disabled.
This fixes a glitch with the 3D view navigation gizmo where multiple
clicks on the view aligned axis failed to switch to the opposite side
unless the user moved the cursor between clicks.
Allow blending the imported cache with the modifiers stack above the
MeshCache modifier.
This is particularly useful for instance when dealing with cloth
simulations performed in another software, where some parts of the cloth
are completely pinned (non-simulated, following the armature). Indeed,
this would allow modifying the animation in some areas without having to
rebake the other parts or the cloth, resulting in a much more flexible
workflow.
Reviewed By: #modeling, campbellbarton, mont29
Ref D9898
The panning angle allows a more intuitive panning when the output is
surround sound. It sets the angle on the horizontal plane around the
listener. 0 degrees is to the front, negative values go to the left and
positive ones to the right. +/-180 degrees is directly from the back.
Technical detail: the panning value is linear with the panning angle
with a factor of 90 degrees. For stereo this means that -1 is left and
+1 right, since the speakers are exactly 90 degrees to either side.
Differential Revision: https://developer.blender.org/D12275
* Make "run" command (re-)run all tests, add "update" command to only
run queued and outdated tests equivalent to the old "run" command.
* Support specifying environment variables for revisions, to easily
compare multiple parameter values.
* Better sorting of revisions in graph.
Improve texture painting/uv editing performance when limited scale is active.
Cause of the slow down is that the image editor draws the image in maximum resolution,
but the 3d viewport uses the limited scale. The variation reuses the same GPU texture
and needed to be uploaded/scaled twice to the GPU.
This patch will adds texture slots that can hold the scaled down and the maximum
resolution image. This would allow better cache hits and reuse of existing caches.
Maximum resolution textures are reused for limited scale when they fit to reduce memory
and CPU footprint.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D12388
This patch allows dropping material assets from material slot under the mouse
cursor. Before this change the material slot had to be hand-picked from the
properties panel.
For consistency it is chosen to do this in any shading mode as the tooltip shows
what is exactly going to happen during release.
The feature also works for other object types than Meshes as it uses the drawn surface on the
GPU to detect the material slots. Performance of this patch has been tested with AMD GCN3.0
cards and are very responsive.
Reviewed By: fclem, Severin
Differential Revision: https://developer.blender.org/D12190
Caused by {rB3e4d720ae483}.
Before above commit, this had a different path handling and
RNA_path_from_ID_to_struct() was always used [which kind of took care of
this]. Now this is only used if ptr represents an ID itself, so we are
"loosing" part of the path.
This patch adds the path back on the member_id in
wm_context_member_from_ptr() for everthing related to space_data, so
WM_context_path_resolve_property_full() can construct a full path even
for these.
Maniphest Tasks: T91225
Differential Revision: https://developer.blender.org/D12418
In e6a1d488ab `deselect_all` property was removed from
`sequencer.select` operator but some keymap items were missed, which was
caught by tests by buildbot.
Operator combines more features and it wasn't very transparent which
properties are used in which feature and how they are used.
Features linked_time, side_of_frame and linked_handle are
isolated, logic moved into own function.
deselect_all property was removed as it practically equals to
!extend in all cases.
Functional change: Dragging existing selection will not change active
strip. Previously this could happen if click happened on strip that
wasn't active.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12320
Even if `snap_targets` `SeqCollection` is empty, there can be static
snap points defined, so don't condition snapping on non-zero target
count.
Differential Revision: https://developer.blender.org/D12400
This patch implements the generic slider from
`ed_draw.c` to the `GRAPH_OT_decimate` operator
This draws a useful UI and enables precision mode and stepping
Overshoot is disabled
The status message is moved to the workspace footer
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D9361
Ref: D9361
Caused by {rB5a9a16334c57}
Linking/appending an asset made from a collection containing certain
types of objects lacking bounding boxes (camera, light) would crash.
Add simple bbox check to prevent the crash.
Maniphest Tasks: T91236
Differential Revision: https://developer.blender.org/D12415
This is to be used when calling code already knows whether the 'made
local' linked ID should be copied, or can directly be converted to a
local one.
Currently unused , this is preparation for rewrite of append code.
This patch just changes the mouse cursor to a "stop sign" when dragging
to an unsupported location during Join or Split operations.
See D11396 for details and examples.
Differential Revision: https://developer.blender.org/D11396
Reviewed by Campbell Barton
Previously, the Point Instance node in geometry nodes could only instance
existing objects or collections. The reason was that large parts of Blender
worked under the assumption that objects are the main unit of instancing.
Now we also want to instance geometry within an object, so a slightly larger
refactor was necessary.
This should not affect files that do not use the new kind of instances.
The main change is a redefinition of what "instanced data" is. Now, an
instances is a cow-object + object-data (the geometry). This can be nicely
seen in `struct DupliObject`. This allows the same object to generate
multiple geometries of different types which can be instanced individually.
A nice side effect of this refactor is that having multiple geometry components
is not a special case in the depsgraph object iterator anymore, because those
components are integrated with the `DupliObject` system.
Unfortunately, different systems that work with instances in Blender (e.g.
render engines and exporters) often work under the assumption that objects are
the main unit of instancing. So those have to be updated as well to be able to
handle the new instances. This patch updates Cycles, EEVEE and other viewport
engines. Exporters have not been updated yet. Some minimal (not master-ready)
changes to update the obj and alembic exporters can be found in P2336 and P2335.
Different file formats may want to handle these new instances in different ways.
For users, the only thing that changed is that the Point Instance node now
has a geometry mode.
This also fixes T88454.
Differential Revision: https://developer.blender.org/D11841
Some GPU's have support for compute shaders, but don't support
GLSL 4.3. This resulted in compiler errors and crashes.
This issue could have been solved by supporting older GLSL languages but
that would have been a hassle to get it right. We already have a
fallback in place for GPU's that don't support compute shaders at all.
When rendering the test scene in T79190 which has only emissive surfaces a division by zero occurs. This is a simple patch to remove this.
Reviewed By: brecht
Maniphest Tasks: T79190
Differential Revision: https://developer.blender.org/D11682
This adds an option to use a capture of the entire main window as the
blend file preview thumbnail.
See D10492 for details and examples.
Differential Revision: https://developer.blender.org/D10492
Reviewed by Campbell Barton
Increase effective resolution of blend preview images from 128x128 to
256x256 for versions saved in the file system thumbnail cache.
See D10491 for details and examples.
Differential Revision: https://developer.blender.org/D10491
Reviewed by Campbell Barton
I remember when we originally decided on the Dimensions panel,
one of the reasons we combined time and image size properties in the same panel,
was simply because the 2.49 and previous UIs used fixed-size panels,
so we often put two categories of properties inside a panel, using two columns.
Now that we no longer do this, we could clarify and simplify some panels
by splitting them, such as the Output > Dimensions panel
{F6753690}
Reviewed By: brecht, pablovazquez
Differential Revision: https://developer.blender.org/D4440
The posterize node limits the number of colors per channel.
This is useful to generate masks or to generate stylized images
Both the tiled and full-frame implementation are included in this patch
{F10314012}
Reviewed By: manzanilla, jbakker
Differential Revision: https://developer.blender.org/D12304
Some operations can take a lot of time to execute and
any duplication should be avoided.
This patch implements a compile step that detects
operations with the same type, inputs and parameters that
produce the same result and merge them. Now operations
can generate a hash that represents their output result. They only
need to implement `hash_output_params` and hash any parameter
that affects the output result.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12341
Adds full frame implementation to Map Range, Map Value, Normal and
Normalize nodes. The other nodes in "Vector" sub-menu are submitted
separately.
Part of T88150.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12233
Adds full frame implementation to Anti-Aliasing, Defocus, Denoise,
Despeckle, Dilate/Erode, Directional Blur, Filter, Inpaint and
Vector Blur nodes. The other nodes in "Filter" sub-menu are
submitted separately.
Part of T88150.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12219
Screen area maintenance "Close" function allowed to be scripted.
See D12307 for usage example.
Differential Revision: https://developer.blender.org/D12307
Reviewed by Campbell Barton
Fixes the regression introduces in rB29f3af952725 . The subdivision modifier used to work on two point strokes with simple mode but not with catmul clark. Now it will work with simple mode and in case of catmull clark mode it will still use simple mode on these strokes.
Differential Revision: https://developer.blender.org/D12397
This changes the search for unprocessed faces to only search
from the previously found face. Local testing on 1.5 million
triangle meshes gives a 75x speedup
(of the code affected, which is the first half of the work).
The former code would traverse all faces of a mesh until a face was
found that had not been processed. This ended up being slow mainly
because it had to load face-data to determine the state of the flag.
Secondarily, the way it iterated and marked the mesh, it would end up
traversing all previously processed faces to find and unprocessed one.
The same optimization has been made for edge-group calculation.
Reviewed By: campbellbarton
Ref D12379
Support extracting identifiers RNA paths into fixed size buffer
since the maximum size of the identifier is known all cases.
- Add BLI_str_unescape_ex to support limiting the destination buffer.
- Add BLI_str_quoted_substr to copy values into a fixed size buffer.
Previously I thought I fixed this by reversing the face corner indices
in quads created by the curve to mesh node. But then we fixed a problem
with the transforms used in that node by inverting one of their
components, so the required direction also reversed. This commit
reverts rBcf28398471c84 and reverses the default direction of the
quadrilateral primitive so it's the same as the others.
Tests will be updated.
Allow the UDIM grid to be shown and adjusted when there are images
loaded in UV edit mode. Right now the grid feature disappears once an
image is loaded and many have found this to be confusing.
Based on community and artist feedback, there was support to change this
behavior[1]
This patch does the following:
- Allows the grid to be shown even when images are present
- The max allowable dimensions for the grid has been increased from
10x10 to 10x100 to match the underlying maximum UDIM range that blender
supports
Note: This should not affect other Image editor modes like Paint/Mask or
the Render Result viewer etc. Future work in this area is currently
documented in a dedicated design task[2]
[1] https://devtalk.blender.org/t/the-udim-tile-grid-design-and-feedback-thread/20136
[2] https://developer.blender.org/T90913
Differential Revision: https://developer.blender.org/D11860
- lower to warning (might be debatable, but this is not really
malfunctioning and e.g. constraints/modifiers dont spit out errors if
targets are not specified)
- clarify _what_ of the two actualy does not exist
ref. T91101
Maniphest Tasks: T91101
Differential Revision: https://developer.blender.org/D12389
Clearing the Parent Bone field in relations would result in something
like this:
```
add_relation(Bone Parent) - Could not find op_from
(ComponentKey(OBArmature, BONE))
add_relation(Bone Parent) - Failed, but op_to (ComponentKey(OBEmpty,
TRANSFORM)) was ok
ERROR (bke.object): /source/blender/blenkernel/intern\object.c:3330
ob_parbone: Object Empty with Bone parent: bone doesn't exist
```
Now skip creation of a depsgraph relation if the Parent Bone field is
empty (since this would be invalid anyways).
ref. T91101
Maniphest Tasks: T91101
Differential Revision: https://developer.blender.org/D12389
This patch fixes the issue described in T88411, that the text in frame nodes is only shown, when the node has a label. This has been caused by rB8f04ddbbc626, because `node_draw_frame_label` not only draws the label, but also all the other text. Therefore skipping it, when the label is empty, also skips drawing the other text.
This is fixed by moving the check for the empty label into `node_frame_draw_label`.
**Patch:** Frame nodes show text despite not having a label.
{F10286204, size = full}
**Same setup in master:**
{F10128099, size = full}
**Test file**
{F10128102}
Reviewed By: #user_interface, pablovazquez
Maniphest Tasks: T88411
Differential Revision: https://developer.blender.org/D11315
When joining two strokes in paint mode using the auto merge option, the join was very hard if the thickness was too different.
This patch adds a smooth to the join in order to get better transition.
Also fixed the problem to join existing strokes very far from actual stroke.
Some cleanup and rename of old code is included in order to make code more readable.
Reviewed By: pepeland
Differential Revision: https://developer.blender.org/D12362
- Split rna_path_token in two,
extracting bracket handling into it's own function.
- Only handle escape characters for quoted tokens.
Numbers were copied using BLI_str_unescape which is unnecessary.
- Extract text without without quotes,
use a return argument so the caller can tell if the token was quoted.
This avoids having to strip the tokens quotes afterwards.
Needed for studio sprite-fright frozen branch.
Also do not overwrite branch for git sub-modules when it is defined, and
fallback to `master` branch in case specified branch is not found in a
specific sub-repository.
Adding a mirror modifier in edit-mode crashed.
Freeing meshes that hold a shallow copy happens in multiple places
while calculating modifiers, making it impractical to clear the
edit-mode pointer before freeing the mesh (as done in
BKE_editmesh_free_derived_caches).
Add a struct member to the edit-mesh struct so evaluated copies
don't free the edit-mesh contents.
No longer free the edit-mesh pointer while in edit-mode since this
isn't reliable to keep the object in edit-mode while freeing it's
edit-mesh data.
Users who want to exit edit-mode should do so explicitly.
Caused by 6d2f9b1dfa.
Freeing the edit-mesh pointer wasn't free the edit-mesh data it's self.
Unlinking from the outliner or through the Python API leaked memory.
This didn't often cause leaks in practice since ED_editors_exit
exits edit-mode for all objects.
Now freeing mesh data frees the edit-mode data as well,
this matches the behavior of other object types that support edit-mode.
The new API introduced in rB1e69a25043120c provides a shorted, more
flexibly way to declare node socket inputs and outputs. This commit
updates all geometry nodes to use the `NodeSocketBuilder` API, except
the four nodes that need `SOCK_HIDE_VALUE` or `SOCK_MULTI_INPUT`.
Differential Revisions: D12377, D12376, D12374, D12373, D12372
Failure to calculate normals caused an assertion since face
tessellation was being calculated with invalid normals.
In practice the rip-drag action would recalculate normals anyway,
however mesh tessellation should always be performed with valid normals.
This commit fixes the custom property edit operator for the the case of
editing group properties. Currently this isn't supported very well, the
data is converted to a string, but the operator shouldn't fail anyway.
This allows editing properties created like this:
C.object['abuse'] = {'parent' : ['child1', 'child2']}
These changes reflect some issues with the design of the operator.
Requiring guessing the type of the data does not work well at all, and
makes code more complicated. In the future this operator can be updated
to use a type drop-down.
Differential Revision: https://developer.blender.org/D12364
Since recently it's possible to query the active file (as object, not
just the name), but it's quite useful for scripting to have access to
all selected files.
This introduces `bpy.context.selected_files`, returning a list of file
objects representing files in the File Browser.
There were requests to be able to track the file selection in the File
Browser. Just using the file name for that wouldn't if the file browser
has the recursive display enabled. File names could be duplicated then.
So expose the entire path relative to the currently displayed directory.
Use BLI_str_quoted_substr_range instead of in-line
quote extraction to resolve:
- Bone names containing quotes caused flip to fail.
- Missing NULL check if a matching quote could not be found.
This is a similar funciton to BLI_str_quoted_substrN
that extracts the range of the quoted string
instead of allocating a new string un-escaped string.
Assigning a new value to an IDProperty with the Python API would free
the entire contents of the existing property, which unfortunately
happened to include the UI data. The fix is to extract the UI data from
the existing property before freeing its contents. An alternative
would be adding another argument to `IDP_FreePropertyContent_ex`, but
this solution is clearer and doesn't increase complexity elsewhere.
When the same stroke was used as a driver variable, this could make this
stroke already tagged as built in the course of building driver
variables (via `build_gpencil`), but then important stuff from
`build_object_data_geometry_datablock` could be missed later on (because
both of these funtions use `checkIsBuiltAndTag`). Most importantly,
setting up operations such as GEOMETRY_EVAL would be skipped entirely.
`build_object_data_geometry_datablock` seems to cover greasepencil just
fine (does the same as `build_gpencil` and more). Proposed solution is to
remove `build_gpencil` entirely. In `build_id` it would then also call
`build_object_data_geometry_datablock` for `ID_GD` IDs. Now the covered
types that _call_ `build_object_data_geometry_datablock` match exactly
to what is covered _inside_ `build_object_data_geometry_datablock`.
Think this "duplication" of functionality was just overseen in
rB66da2f537ae8 [`build_gpencil` existed long before and said commit made
greasepencil a real object with geometry and such].
thx @JacquesLucke for additional input!
Maniphest Tasks: T88433
Differential Revision: https://developer.blender.org/D12324
All props of annotations are not animatable by design and opacity must be equal.
As the opacity is reused by gpencil objects, a new prop has been created in order to use different props for annotations and GP objects.
Image Editor
When changing to another texture paint slot, the texture displayed in
the viewport changes accordingly (as well as the image displayed
in the Image Editor).
When changing the active texture in the Node Editor though, only the
texture displayed in the viewport changes.
This was mentioned in T88788 and I am not 100% sure this is desired in
all scenarios (or at all), it should be seen in tandem of D11497. This
change makes it so that the Image Editor changes to the image we changed
to in the Node Editor (keeping them in sync).
If this is not desired in all cases, this could be made an option.
ref T88788
ref D11496
ref D11497
Maniphest Tasks: T88788
Differential Revision: https://developer.blender.org/D11498
active paint slot
When changing to another texture paint slot, the texture displayed in
the viewport changes accordingly (as well as the image displayed
in the Image Editor).
When changing the active texture in the Node Editor though, only the
texture displayed in the viewport changes.
This _can_ be confusing because you can end up painting on a texture
that you are not looking at in the viewport (so you dont have any
feedback whatsoever). Not 100% sure this is desired in all scenarios,
but this change makes it so that the active paint slot changes to the
one that uses the texture we chaged to in the Node Editor (keeping them
in sync).
If this is not desired in all cases, this could be made an option.
ref T88788
ref D11496
Maniphest Tasks: T88788
Differential Revision: https://developer.blender.org/D11497
Caused by {rBf3bf87e5887c}.
When using a GPencil Time Offset Modifier, the bGPDlayer>actframe can be
NULL. This can be determined though, but above optimization commit
skipped getting the active frame in this case entirely (with the
intention to only get it if framenumbers did not match).
Now also call BKE_gpencil_layer_frame_get() if actframe is NULL in order
to fetch a valid one if present.
Maniphest Tasks: T91060
Differential Revision: https://developer.blender.org/D12355
Run into it when was re-working tiles in the Cycles X project.
Make sure the storage of highlighted tiles is emptied when the
render is finished or cancelled).
The error is only possible to happen if the engine did not do
something correct, but is still good to deal with such situations
more gracefully.
Steps to reproduce:
- enable Extended Asset Browser
- open a regular File Browser
gives:
"rna_uiItemR: property not found: FileSelectParams.asset_category"
Now do proper poll.
Differential Revision: https://developer.blender.org/D12350
When the object display type was set to wireframe or boundbox the depth
buffer wasn't updated resulting in not visible weightpaint overlay.
Thanks to Demeter Dzadik for mentioning it.
Support axis constraints for the measure tool.
Press X, Y or Z to restrict the dimension to that axis,
it's also possible to toggle between orientations matching transform.
Reviewed By: campbellbarton
Ref D10872
This commit fixes editing the value of a list of strings custom property
with the "Custom Property Edit" operator. This sort of custom property
isn't very well supported in general, but editing the values should
work properly anyway.
Differential Revision: https://developer.blender.org/D12348
Use context members instead of not working well or failing due to:
- Missing "path" functions (in the case of edit-bones).
- Paths containing names (in the case of sequence-strips or pose-bones).
While technically correct it's not useful for shortcuts or
menu items to lookup data by name.
Only append RNA_path_from_ID_to_struct to context attributes if those
paths resolve to ID types.
Also simplify creating RNA paths by adding utility functions:
- WM_context_path_resolve_property_full
- WM_context_path_resolve_full
Part of fix for T90723.
Selection was already accessible but not active.
Add utility functions:
- ANIM_nla_context_track to access the active track,
following the convention of ANIM_nla_context_strip.
- ANIM_nla_context_*_ptr versions of these functions,
needed to for creating context members to access the ID pointer.
Part of fix for T90723.
Math implemented in 929d7597b3 was incorrect, but also inconsistent
with previous behavior.
`SEQ_SPEED_STRETCH` should change length only when right handle is
moved. This is now documented in code.
API function `move_to_meta` should move strips without changing context
data like `MetaStack` that tells UI which meta strip should be
displayed and operated upon.
`SEQ_time_update_sequence` relied on `MetaStack` to update meta strip
content length. Instead of changing function `SEQ_time_update_sequence`,
use function `SEQ_time_update_meta_strip_range` directly. This is
because caller would have to be aware of parent meta strip that needs
update anyway.
This is an alternative to context.scene.sequence_editor.active_strip
which could be verbose, especially with additional None checks.
Part of fix for T90723, extracted from D12297.
Previously, built-in nodes had to implement "socket templates"
(`bNodeSocketTemplate`) to tell Blender which sockets they have.
It was nice that this was declarative, but this approach was way
too rigid and was cumbersome to use in many cases.
This commit starts to move us away from this rigid structure
by letting nodes implement a function that declares the sockets
the node has. Right now this is used as a direct replacement
of the "socket template" approach to keep the refactor smaller.
It's just a bit easier to read and write.
In the future we want to support more complex features like
dynamic numbers of sockets and type inferencing. Those features
will be easier to build on this new approach.
This new approach can live side by side with `bNodeSocketTemplate`
for a while. That makes it easier to update nodes one by one.
Note: In `bNodeSocketTemplate` socket identifiers were made
unique automatically. In this new approach, one has to specify
unique identifiers manually (unless the name is unique already).
Differential Revision: https://developer.blender.org/D12335
Now if the frame does not exist in destination layer, the frame type of merge layer is used.
For existing frames in destination layer, the existing type is not changed.
This node takes a curve geometry input and creates a filled mesh at Z=0
using a constrained Delaunay triangulation algorithm. Because of the
choice of algorithm, the results should be higher quality than the
filling for 2D curve objects.
This commit adds an initial fairly simple version of the node, but more
features may be added in the future, like transferring attributes when
necessary, or an index attribute input to break up the calculations
into smaller chunks to improve performance.
Differential Revision: https://developer.blender.org/D11846
This mesh primitive enhances the Cube mesh primitive and allows the
creation of a cuboid with a configurable size and number of vertices
in all 3 directions. The Cube primitive is now similar to the Grid
primitive except that it works in 3 dimensions.
Previously it was possible to create a cube and scale it arbitrarily
along each axis. You could also subdivide the mesh, but the number of
subdivisions was equal along all axes. This meant that making the basic
frame for something like modular buildings wasn't trivial.
Inspired by tutorials and files for modular building creation.
The cuboid is created as a `Mesh` so that large meshes with millions of
faces are created quickly. Though edge calculation could be faster if
implemented here, edges are calculated using `BKE_mesh_calc_edges`
to reduce complexity, and in hopes that they may be calculated lazily
for `Mesh` in the future like vertex normals.
See the differential revision for more information.
Differential Revision: https://developer.blender.org/D11810
This commit allows setting the number of vertices in either direction
to 1, so that the primitive grid node will create a line instead of a
grid. To avoid confusion the soft limits of the input sockets are not
changed, so this is purely an increase in flexibility for when it is
helpful.
Differential Revision: https://developer.blender.org/D11772
The outer edges created om the circle mesh primitive node
weren't marked with the flags that makes them show in wireframe
mode.
Differential Revision: https://developer.blender.org/D12152
This function was documented to return the length but returned an
error value for WIN32. While this doesn't cause any bugs at the moment,
it could cause problems in the future.
Oversight in 5496d8cd36.
Besides helping to avoid buffer overflow errors this reduces complexity
of BLI_str_utf32_as_utf8 which needed a special loop for the last 6
characters to avoid writing past the buffer bounds.
Also add BLI_str_utf8_from_unicode_len which only returns the length.
This was added in b24712a9ca
but is no longer needed as of efc129bc82.
Further, this wasn't reliable as it could fail on linked library data
which has a different base directory.
Assert when blend file relative paths are passed to BLF
(matching imbuf file loading).
The default float IDProperty min value rB8b9a3b94fc148d19 for when there
is no UI data was FLT_MIN instead of -FLT_MAX, which meant that animated
custom property values couldn't be less than zero unless they had their
UI data values edited previously.
That's a mistake I won't make again! Also change the int minimums from
-INT_MAX to INT_MIN to sanitize the whole situation.
This patch just clamps and rounds node contents and socket locations
so they don't appear to jiggle around when you move them. This issue
happens because node sizing and positioning are in floats while text
content must be pixel-aligned.
See D11684 for more details and comparisons.
Differential Revision: https://developer.blender.org/D11684
Reviewed by Julian Eisel
The overlay was drawn twice on top of each other making it hard to see,
hard to theme, and making it more prominent in the wrong areas (before
frame 0, not even start frame). The comment in the code was also wrong
since it said "frame one" but it was 0.
Checked with the Animation module team that it's better to use start/end
frame range instead of frame 0.
There is a TODO note to de-duplicate this section eventually so I left it there.
This fix is currently done for Grease Pencil and Mask modes, but it should
also be fixed for the regular Dopesheet mode (in line 244 if anyone wants to do it).
The storage of IDProperty UI data (min, max, default value, etc) is
quite complicated. For every property, retrieving a single one of these
values involves three string lookups. First for the "_RNA_UI" group
property, then another for a group with the property's name, then for
the data value name. Not only is this inefficient, it's hard to reason
about, unintuitive, and not at all self-explanatory.
This commit replaces that system with a UI data struct directly in the
IDProperty. If it's not used, the only cost is of a NULL pointer. Beyond
storing the description, name, and RNA subtype, derived structs are used
to store type specific UI data like min and max.
Note that this means that addons using (abusing) the `_RNA_UI` custom
property will have to be changed. A few places in the addons repository
will be changed after this commit with D9919.
**Before**
Before, first the _RNA_UI subgroup is retrieved the _RNA_UI group,
then the subgroup for the original property, then specific UI data
is accessed like any other IDProperty.
```
prop = rna_idprop_ui_prop_get(idproperties_owner, "prop_name", create=True)
prop["min"] = 1.0
```
**After**
After, the `id_properties_ui` function for RNA structs returns a python
object specifically for managing an IDProperty's UI data.
```
ui_data = idproperties_owner.id_properties_ui("prop_name")
ui_data.update(min=1.0)
```
In addition to `update`, there are now other functions:
- `as_dict`: Returns a dictionary of the property's UI data.
- `clear`: Removes the property's UI data.
- `update_from`: Copy UI data between properties,
even if they have different owners.
Differential Revision: https://developer.blender.org/D9697
Reason was that the notifier did not set the NS_VIEW3D_SHADING
subtype, which the VR view listens for for a shading update.
In the case of "toggle xray", a notifier was absent altogether.
Add mode to overwrite strips on overlap instead of resolving overlap.
When overlap is created, 3 things can happen:
- On partial overlap, handles of overlapped strip are moved
- On complete overlap with smaller strip, overlapped strip is split
- On complete overlap with larger strip, overlapped strip is removed
This mode can be enabled in header.
Reviewed By: fsiddi, mano-wii
Differential Revision: https://developer.blender.org/D11805
Caused by {rB1a81d268a19f}.
This caused e.g. ALT-clicking the 'Link' button to not propagate to
other selected objects (same as the 'Copy To Selected' context menu
entry).
If these are not unique across IDs, checks in ui_selectcontext_begin()
or copy_to_selected_button() could fail.
Now offset by ID pointer.
thx @JacquesLucke for clarification on the POINTER_* macros (and why
not to use them)!
Maniphest Tasks: T90907
Differential Revision: https://developer.blender.org/D12321
This reverts 151eed752b. Originally thought it was necessary to
initialize selected/active indices to -1 to prevent out-of-bounds
list access, but this is not needed since null checks are already
performed after obtaining list members via BLI_findlink().
In addition, leaving indices zero-initialized facilitates use of the
Python API, for example when displaying action map information in a
UI list.
Various changes to reduce risk of out of bounds errors in utf8 seeking.
- Remove BLI_str_prev_char_utf8
This function could potentially scan past the beginning of a string.
Use BLI_str_find_prev_char_utf8 instead which takes a limiting
string start argument.
- Swap arguments for BLI_str_find_prev_char_utf8 so the stepping
argument is first and the limiting argument is last.
This matches BLI_str_find_next_char_utf8.
- Change behavior of these functions to return it the start or end
pointers instead of NULL, which complicated use of these functions
to calculate offsets.
Callers that need to check if the limits were reached can compare
the return value with the start/end pointers.
- Return 'const char *' from these functions
so they don't remove const from the input arguments.
Add an option to the mask modifier to use the vertex weights to generate
smooth in between geometry, instead of just deleting non complete faces.
This can be used to make all sorts of smooth dissolve animations
directly with geometry, which are usually hacked together with shaders.
It also allows for implicit function plotting using geometry nodes and
boolean like operations on non manifold geometry with the proximity
modifier.
Reviewed By: campbellbarton
Ref D10979
These buttons were in Meshes but not for Grease Pencil. This patch add them in order to keep consistency.
Reviewed By: HooglyBoogly
Maniphest Tasks: T90973
Differential Revision: https://developer.blender.org/D12328
Change Area Move snapping locations to even 12ths, rather than current
eights and thirds, so snap distances are consistent sizes. Also adds
snapping at minimum and maximum locations.
see D11938 for details and illustrations.
Differential Revision: https://developer.blender.org/D11938
Reviewed by Hans Goudey
Solution similar to the one seen in {rBb94ab93dfb82}.
The idea is to find the window and region under the cursor to use in the
operator.
Reviewed By: brecht
Maniphest Tasks: T90817
Differential Revision: https://developer.blender.org/D12310
Is used for platforms for which we do not have native implementation,
such as MIPS, for example.
It is possible to test locking implementation on local computer by
defining `ATOMIC_FORCE_USE_FALLBACK` in the atomic_ops_unix.h file.
Run full regression suit with the locking implementation on amd64
Linux platform and all tests passed.
Having non-optimal but working implementation for odd-ball platforms
seems to be a better choice than failing the build entirely.
Differential Revision: https://developer.blender.org/D12313
Should be no visible change on user side.
Preparing for render parts removal as part of Cycles X project.
Differential Revision: https://developer.blender.org/D12317
I think there are the following issues with {rB5fa6cdb77a98}:
- if we introduce a PROP_UNIT_TIME_ABSOLUTE unit, shouldnt it be visible
to RNA as well?
- seems like a double entry sneaked into that commit?
This is in preparation to use this for render time limit in cycles-x.
ref. T90701
Maniphest Tasks: T90701
Differential Revision: https://developer.blender.org/D12315
The inset tool requires moving the cursor towards the center of the
selection, making it nearly impossible to use the inset tool
when the view was aligned with the vertical handle.
Use custom settings for VIEW3D_GGT_tool_generic_handle_free
to make it draw hollow, as large as the scale tool.
Resolves T87991.
Before, distances from each component were handled in the same loop,
making it more complicated to add support for more component types
in the future (and probably hurting performance by dealing with two
BVH trees at the same time, though I didn't test that).
Now each component is handled in a separate function, so that adding
support for another component type is much simpler.
Remove redundant code for drawing text strings that contain only ASCII.
See D12293 for much more detail.
Differential Revision: https://developer.blender.org/D12293
Reviewed by Campbell Barton
The /Zc:inline flag is by default off in the MSVC
compiler however when you build with msbuild it adds
it to the build flags on its own.
Ninja however does not decide on its own to add
flags you didn't ask for and was building without
this flag.
This change explicitly adds the compiler flag so
msbuild and ninja builds are once more building
with the same build flags leading to smaller .obj
files when building with ninja and lightening the
workload for the linker.
This flag is available starting MSVC 2013 update 2
so does not need to be guarded with version checks.
The code assumed that when a node group is is at the highest
level in the node editor, then it is embedded into another data
block and can't be referenced by other node groups. This is true
for shader and compositor nodes, but not for geometry nodes.
We now use a for_each function with callback to iterate through all sequences in the scene.
This has the benefit that we now only loop over the sequences in the scene once.
Before we would loop over them twice and allocate memory to store temporary data.
The allocation of temporary data lead to unintentional memory leaks if the code used returns to exit out of the iteration loop.
The new for_each callback method doesn't allocate any temporary data and only iterates though all sequences once.
Reviewed By: Richard Antalik, Bastien Montagne
Differential Revision: http://developer.blender.org/D12278
Previously when loading an thumbnails for an asset the whole file was
read. Reason this was done was perhaps a future idea to load
all thumbnails inside a blendfile in a single go. This was never implemented
and currently unneeded disk and cpu cycles was spend with finding out what
preview to load.
This patch adds an early break when the thumbnail that the caller is
interested in has been found. This improves the thumbnail extraction
when looking into large files.
Reviewed By: mont29
Maniphest Tasks: T90908
Differential Revision: https://developer.blender.org/D12312
This integer divide by zero was evaluated to 0 on all platform but apple,
where it yields 1. The world lighting would then sample the 1 sample of the
first grid instead of its own sample.
Enables all currently documented OpenXR controller profile
extensions (Reverb G2, Vive Cosmos, Huawei Controller) in order to
support bindings for more VR hardware.
This is necessary because, if these extensions are not enabled, the
OpenXR runtime will return an error when creating a binding with one
of these profiles.
Does not bring about any changes for users at the moment, since
default controller actions have not yet been exposed to users (will
be addressed with D10944, D10948, and D11271).
Originally mentioned that absolute tracking was disabled, which is
wrong because absolute tracking (skipping application of eye offsets)
is always available, although it may not give the expected result of
persistent tracking origins across sessions if the stage space is
unavailable (hence the need for a warning).
Now, the warning makes no mention of absolute tracking, instead
informing the user that the local space fallback will be used and
that they should define tracking bounds via the XR runtime if they
wish to use the stage space.
Add null check for runtime data since it could already have been
freed via wm_xr_exit() (called on file read) prior to the session
exit callback.
Also, fix potential memory leak by freeing session data in
wm_xr_runtime_data_free() instead of session exit callback.
This fixes two memory leaks related to XR action maps.
1. Freeing of action maps needs to be moved from wm_xr_exit() to
wm_xr_runtime_data_free() since the runtime may have already been
freed when calling wm_xr_exit().
2. Action bindings for action map items were not being freed. This
was mistakenly left out of e844e9e8f3 since the patch needed to be
updated after d3d4be1db3.
This fixes a mistake in the XrActionMaps RNA struct declaration.
Originally, the XrActionMaps struct SDNA was set as wmXrData to get
access to wmXrRuntimeData. However, this doesn't give a valid pointer
and the XrSessionState RNA pointer needs to be passed instead.
Since XrSessionState itself does not have SDNA, it is necessary to
pass the XrSessionState pointer to the XrActionMaps struct functions
(new(), new_from_actionmap(), ...) instead of simply using
RNA_def_struct_sdna().
Having settings such as "extend" saved between executions causes
keymaps that don't include this setting to remember the value
between execution.
No longer store this setting for selection operations & remove
redundant values from the key-maps, see: T90275.
Remove BLI_str_utf8_as_unicode_and_size and
BLI_str_utf8_as_unicode_and_size_safe.
Use BLI_str_utf8_as_unicode_step instead since it takes
a buffer bounds argument to prevent buffer over-reading.
There were multiple utf8 functions which treated
errors slightly differently.
Split BLI_str_utf8_as_unicode_step into two functions.
- BLI_str_utf8_as_unicode_step_or_error returns error value
when decoding fails and doesn't step.
- BLI_str_utf8_as_unicode_step always steps forward at least one
returning the byte value without decoding
(needed to display some latin1 file-paths).
Font drawing uses BLI_str_utf8_as_unicode_step and no longer
check for error values.
Use video format for export instead of image sequence. Settings are same
as defined in h264_in_MP4 preset.
Sound default is AAC with 256kbit bitrate.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D7916
Instead of passing separate booleans for whether to store the locations
and distances, check if the spans are empty. And instead of passing a
separate boolean for whether there is valid tree data, pass a pointer
to the data.
The comment for data_eval mentions that it should contain a mesh for
curve objects, however with geometry nodes, objects can evaluate to
curves as well (though they are only containers for the `CurveEval`.
That is a larger issue, but with the upcoming geometry instancing patch
the situation changes, so this commit does not correct that. I also hope
to remove this code in favor of the new curve to mesh code soon.
Instead, just check the evaluated data type in this case, which prevents
the crash, though it is hacky.
- New operator property to toggle edge panning in the keymap:
This is disabled by default to avoid edge-panning in cases where it
gets distracting, such as adding a new node. Only the explicit
translate operator(s) (GKEY or drag) have this enabled now.
- Restore the initial view rect on edge pan cancel:
The initial view rect is now stored in the edge pan operator data.
When an operator with edge panning is cancelled it can now call the
`UI_view2d_edge_pan_cancel` function to restore the original View2D
rect.
- Less delay in node editor scrolling:
Delay is useful when scrolling through long lists, such as in the
outliner, but makes node scrolling feel sluggish and unresponsive.
The lower scroll speed here makes a faster response the better option.
- Zoom influence feature:
Somewhat slower scrolling in UI-space when zoomed out. With the 0.5
zoom influence factor nodes behave as if zoom factor is halved,
otherwise it gets too fast when zoomed out. Previously scrolling would
always be constant-speed in UI space, now it's half-way between UI
space and node (view) space.
Before this patch attempting to remove a particle modifier programmatically
through Python would fail, because it deleted the modifier associated with
the currently active particle system instead of the one passed as an argument
to `bpy.types.ObjectModifiers.remove()`.
This fix adds an additional argument for the particle system to
`object_remove_particle_system`. This allows to specify which particle system
and its associated modifier shall be removed. In case of
`particle_system_remove_exec` it will remain the currently active particle
system, whereas `object_remove_particle_system` passes the particle system
of the modifier. Hence, the correct modifier will be removed.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D12234
The idea is to only allocate pixel storage only when there is an actual
data to be written to them.
This moves the code forward a better support of high-res rendering when
pixel storage is not allocated until render engine is ready to provide
pixel data.
Is expected to be no functional changes for neither users no external
engines. The only difference is that the motion and depth passes will
be displayed as transparent for until render engine provides any tile
result (at which point the pixels will be allocated and initialized to
infinite depth).
Differential Revision: https://developer.blender.org/D12195
This overlay was intended to identify the active objects in modes
like Sculpt Mode, where you don't have any extra visual indication
of what is the current and target object when switching directly
between them.
After having flash on mode transfer on the transfer mode operator,
the visual information this overlays provides is redundant. It is
still available in case some users want to use it like a way of
focusing on the active object.
Reviewed By: JulienKaspar, JacquesLucke
Differential Revision: https://developer.blender.org/D12303
We need to separate the flag telling duplicate code to not handle
remapping to new IDs etc., from the one telling the code that we are
currently duplicating a 'root' ID (i.e. not a dependency of another
duplicated ID).
This whole duplicate code/logic is still fairly unsatisfying, think it
will need further refactor, or maybe even re-design, at some point...
Add a string length argument to BLI_str_utf8_as_unicode_step to prevent
reading past the buffer bounds or the intended range since some callers
of this function take a string length to operate on part of the string.
Font drawing for example didn't respect the length argument,
potentially causing a buffer over-read with multi-byte characters
that could read past the end of the string.
The following command would read 5 bytes past the end of the input.
`BLF_draw(font_id, (char[]){252}, 1);`
In practice strings are typically null terminated so this didn't crash
reading past buffer bounds.
Nevertheless, this wasn't correct and could cause bugs in the future.
Clamping by the length now has the same behavior as a null byte.
Add test to ensure this is working as intended.
Prior to rBb8ecdbcd964a normals were stored both in
DeviceScene.tri_vnormal and the float3 attributes buffer. However, the
normals in `DeviceScene.tri_vnormal` might have be transformed to world
space if the object's transformation was applied, while the data in the
float3 attributes buffer were not. This caused shading issues in cases
where the objects did have transformation applied, as the math expects
the normals to be in object space.
To fix this, convert the normals to object space if necessary before
applying the normal map.
Reviewed By: brecht
Maniphest Tasks: T90854
Differential Revision: https://developer.blender.org/D12294
Simplify logic of speed effect frame calculation by using discrete math
where possible. Only `SEQ_SPEED_MULTIPLY` mode with animation requires
frame map to be built. Frame map building was simplified by removing
unused branches.
Functional change: Animating strip in negative range will reverse playback.
I assume this was limitation of previous system, where each frame map item
was limited to be within correct frame range. Now frame map can contain
values that point beyond usable range and they are limited by
`seq_speed_effect_target_frame_get`. This way it is possible to control
playback rate in both directions.
Mostly fixes T89120 apart from offset handling.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11939
Prefetch needs to avoid rendering scene strips, because
- Rendering in background needs own dependency graph, which fails to
initialize from evaluated data.
- This locks UI and can make it unresponsive for long time periods.
In T88237 prefetch failed to avoid scene strip, because of effect strip
was attached to scene strip.
Ensure, that no effect that is attached to scene strip either directly
or indirectly would be rendered.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11247
When splitting strips, first they are duplicated and then offsets
adjusted. This can fail on cross transitions, because some strips don't
overlap with split frame.
All strips, that relate to each other must be duplicated to ensure
correct relations after splitting, so solution is to delete non
overlapping strips from left or right side respectively.
Since cross transition don't have to overlap with source strips,
splitting such strips would lead to effect being deleted, which
could cause crash when iterating over strips in python. Therefore
splitting of such strips is now forbidden and will generate error.
Splitting of transition will also generate error solely because such
operation is illogical.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D12121
When all strips are selected and overlap is caused, this causes VSE to
hang in infinite loop, because such situation should never happen.
To prevent infinite loop, ensure, that strip overlap is not tested
against single overlapping strip itself.
Prevent overlap that can not be handled because of issue described above
by moving overlapping strip between channels.
Reviewed By: campbellbarton
Differential Revision: D12209
`CurveMapping.evaluate` function expectes `CurveMapping` to be
initialized, while this wasn't documented.
I don't see any reason for not initializing `CurveMapping` on demand.
Initialization was added in rBf16047c2df1e8be56bf76524f9eb1fa5ecde2176
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12145
Changes the threshold comparison from absolute to relative.
Removes threshold for MLoopCol comparison.
Adds a compare relative threshold function.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D12273
`MeshBufferCache` is a struct representing a list of buffers.
As such, `GPUIndexBuf **tris_per_mat` is out of place as it does not
represent one of the buffers in the list.
In fact this member should be close to `GPUBatch **surface_per_mat` as
they are related.
The code for dependencies between buffer and batch had to be reworked
as it relies on the member's position.
Differential Revision: https://developer.blender.org/D12227
When using a Cryptomatte node and selecting 2 views in Multi-View,
its output values are doubled. When selecting 3 tripled and so on.
This causes incorrect compositing results for all the views.
The node creates an input operation for each rendered cryptomatte
pass. In Multi-View, passes are rendered for each view but compositor
is executed per view and should only create operations for those
corresponding to the current view being executed. Otherwise duplicated
operations add up later in cryptomatte operation.
Reviewed By: jbakker
Maniphest Tasks: T89998
Differential Revision: https://developer.blender.org/D12216
Adds full frame implementation to Channel Key, Chroma Key, Color Key,
Color Spill, Cryptomatte, Difference Key, Distance Key, Keying,
Keying Screen and Luminance Key nodes. The other nodes
in "Matte" sub-menu are submitted separately.
No functional changes.
Part of T88150.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12220
Adds full frame implementation to these nodes operations.
When enabling "extend bounds" node option, tiled implementation
result is slightly different because it's using `TranslateOperation`
with bilinear sampling for centering.
Full frame always uses nearest to don't lose image quality.
It has the disadvantage of causing image jiggling on backdrop
when switching size values as it's not pixel perfect.
This is fixed by rounding to even.
No functional changes.
Part of T88150.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12167
Adds full frame implementation to "Displace", "Crop", "Flip",
"Plane Track Deform", "Corner Pin", "Movie Distortion",
"Lens Distortion" and "Map UV" nodes.
The other nodes in "Distort" sub-menu are implemented
separately in other commits.
No functional changes.
Part of T88150.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12166
Adds full frame implementation to "Rotate", "Transform" and
"Stabilize2D" nodes.
To avoid sampling twice when concatenating scale and rotate
operations, a `TransformOperation` is implemented with all
the functionality.
The nodes have no functional changes.
Part of T88150.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12165
Current sampling methods have off by one issues on full frame:
- Bilinear sampling do not fully sample bottom and left image border,
creating edges.
- Single elem buffers are not sampled at all when they should be
at least on the borders to smooth edges.
- EWA filtering is partially implemented on `ReadBufferOperation`, it
needs to be moved to `MemoryBuffer` on full frame.
In order to not affect tiled implementation, this commit creates
specific sampling methods for full frame needs.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12164
Adds full frame implementation to all nodes in "Converter" sub-menu
except "ID Mask" which is implemented separately.
No functional changes.
Part of T88150.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12095
Solves an error in the principled diffuse BSDF, where it was not correctly
rejecting directions outside the hemisphere.
Differential Revision: https://developer.blender.org/D12283
Authored by Henrik Dick (weasel)
Reviewed By YimingWu (NicksBest), Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12284
selected pass
Caused by {rBebaa3fcedd23}.
Seems this above commit assumed an ImageUser's multi_index is only used
for Multiview/Stereo? This is not the case, multi_index also stores the
index for layer/pass combination.
If we call both BKE_image_multilayer_index and BKE_image_multiview_index
(even though this is not appropriate/needed for multilayer images?), we
might end up overwriting multi_index again.
note: looking at this I was also wondering why we update the ImageUser
in image-buffer-aquiring funnctions [and not from the UI, e.g.
template_image_layers, but that is a whole different story I guess, see
comment in T90772 as well]
note2: this could also use a utility function (this is not the only
place where this is done), this is fo a cleanup commit.
Maniphest Tasks: T90772
Differential Revision: https://developer.blender.org/D12267
This was working differently in 2.79, tried tracking this down and it
seems this was wrong since the 2.8 beginning in {rB7907dfc40018}.
This would not only crash without an active scene camera, but would also
result in different tracks from different camera's constraints could not
be selected.
So select id depends on corresponding camera, remove the dependency on
scene camera completely.
Maniphest Tasks: T90651
Differential Revision: https://developer.blender.org/D12230
Remove `font_kerning_style` from `space_userpref.py` since this is no
longer valid.
See more details in D12276
Differential Revision: https://developer.blender.org/D12276
Reviewed by Campbell Barton
Compressing blendfiles can help save a lot of disk space, but the slowdown
while loading and saving is a major annoyance.
Currently Blender uses Zlib (aka gzip aka Deflate) for compression, but there
are now several more modern algorithms that outperform it in every way.
In this patch, I decided for Zstandard aka Zstd for several reasons:
- It is widely supported, both in other programs and libraries as well as in
general-purpose compression utilities on Unix
- It is extremely flexible - spanning several orders of magnitude of
compression speeds depending on the level setting.
- It is pretty much on the Pareto frontier for all of its configurations
(meaning that no other algorithm is both faster and more efficient).
One downside of course is that older versions of Blender will not be able to
read these files, but one can always just re-save them without compression or
decompress the file manually with an external tool.
The implementation here saves additional metadata into the compressed file in
order to allow for efficient seeking when loading. This is standard-compliant
and will be ignored by other tools that support Zstd.
If the metadata is not present (e.g. because you manually compressed a .blend
file with another tool), Blender will fall back to sequential reading.
Saving is multithreaded to improve performance. Loading is currently not
multithreaded since it's not easy to predict the access patterns of the
loading code when seeking is supported.
In the future, we might want to look into making this more predictable or
disabling seeking for the main .blend file, which would then allow for
multiple background threads that decompress data ahead of time.
The compression level was chosen to get sizes comparable to previous versions
at much higher speeds. In the future, this could be exposed as an option.
Reviewed By: campbellbarton, brecht, mont29
Differential Revision: https://developer.blender.org/D5799
Instead of handling mmap, compression etc. all directly in readfile.c, refactor
the code to use a generic FileReader.
This makes it easier to add new compression methods or similar, and allows to
reuse the logic in other places (e.g. thumbnail reading).
Reviewed By: campbellbarton, brecht, mont29
Differential Revision: https://developer.blender.org/D5799
With the ongoing transition to C++ files, Windows build
breaks often because of designated initializers.
Now we have two compilers to catch the MSVC build error on.
Reviewed By: #platform_macos, brecht, campbellbarton
Differential Revision: https://developer.blender.org/D11940
Optimization of font kerning by only caching kerning values after a
pair is encountered. Also saves unscaled values so they don't have to
be rebuilt between font size changes.
See D12274 for more details and speed comparison.
Differential Revision: https://developer.blender.org/D12274
Reviewed by Campbell Barton
Updates sphinx and the theme to the latest version along with any of their dependencies.
Note that we will be sticking to sphinx 4.1.1 until sphinx 4.2 for the same reasons listed in:
https://developer.blender.org/rBM8334
This adds a setting to enable data caching, and another one to set the
maximum cache size in megabytes.
When caching is enabled we load the data for the entire animation in
memory, as we already do, however, if the data exceeds the memory limit,
render is aborted.
When caching is disabled, we simply load the data for the current frame
in memory.
Ref D10197
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D11163
The multi-function network system was able to compose multiple
multi-functions into a new one and to evaluate that efficiently.
This functionality was heavily used by the particle nodes prototype
a year ago. However, since then we only used multi-functions
without the need to compose them in geometry nodes.
The upcoming "fields" in geometry nodes will need a way to
compose multi-functions again. Unfortunately, the code removed
in this commit was not ideal for this different kind of function
composition. I've been working on an alternative that will be added
separately when it becomes needed.
I've had to update all the function nodes, because their interface
depended on the multi-function network data structure a bit.
The actual multi-function implementations are still the same though.
As subdivision objects are first class citizens in Alembic, to
differentiate them with non-subdivided polygon meshes, the Alembic
Procedural automatically sets up subdivision properties on the generated
Cycles Mesh.
However, for real-time playback subdivision is far too slow, so this
modifies the detection of a MeshSeqCache modifier used to activate the
procedural to allow for a Subsurf modifier right after the cache one. If
present, the procedural will tag the object for subdivision, if absent, the
object will be treated as a regular mesh.
This is a temporary measure for until subdivision surface settings are part
of the Mesh datablock (see T68891).
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D11162
Several pure runtime data in this ID type were not properly cleared by
write/read processes.
Note that the initial undo step (the one leading back to initial read
file state) is still forcing re-load of image, for some reasons.
Common investigation together with Jeroen Bakker (@jbakker), thanks. See
also D12242.
This was partially broken with {rBde9ea94fc6f}.
The `Frame Step` and `Second Step` snapping options were working as if
they were `Nearest Frame` and `Nearest Second` respectively in the
`Dope Sheet` and `NLA` editors.
In the `Graph Editor` the problem was more serious:
"Second Step: ... The keyframe itself moves along as though in snapping
were active at all, while its handles 'stay behind' until it reaches
the next second boundary, at which point the teleport handles to
'catch up'".
The snapping code for these modes was spread across the transform
mode code and `recalcData` of each data type. Therefore, create a
unified snapping code for these options so that all issues are fixed in
one place.
Differetial Revision: https://developer.blender.org/D12241
`td2d->loc`, `td2d->loc2d`, `td->loc` and `td->iloc` were not being
initialized as is done with the other conversion types.
This avoids problems with transform modes becoming incompatible.
This avoids problems with incompatible transform modes that could
result in a crash.
This was not really useful, and added estra useless steps in case and ID
should not actually be written.
Further more, it prevented clearing the usercount on write, which can be
cause a false positive 'chanhged' detection in undo/redo case.
This patch exposes the Cycles Alembic Procedural through the MeshSequenceCache
modifier in order to use and test it from Blender.
To enable it, one has to switch the render feature set to experimental and
activate the Procedural in the modifier. An Alembic Procedural is then
created for each CacheFile from Blender set to use the Procedural, and each
Blender object having a MeshSequenceCache modifier is added to list of objects
of the right procedural.
The procedural's parameters derive from the CacheFile's properties which are
already exposed in the UI through the modifier, although more Cycles specific
options might be added in the future.
As there is currently no cache controls and since we load all the data at the
beginning of the render session, the procedural is only available during
viewport renders at the moment. When an Alembic procedural is rendered, data
from the archive are not read on the Blender side.
If a Cycles render is not active and the CacheFile is set to use the Cycles Procedural,
bounding boxes are used to display the objects in the scene as a signal that the
objects are not processed by Blender anymore. This is standard in other DCCs.
However this does not reduce the memory usage from Blender as the Alembic data
was already loaded either during an import or during a .blend file read.
This is mostly a hack to test the Cycles Alembic procedural until we have a
better Blender side mechanism for letting renderers load their own geometry,
which will be based on import and export settings on Collections (T68933).
Ref T79174, D3089
Reviewed By: brecht, sybren
Maniphest Tasks: T79174
Differential Revision: https://developer.blender.org/D10197
The current behavior of the Alembic importer is to only create a
`MeshSequenceCache` modifier or a `Transform Cache` constraint to imported
objects if they have some animated properties.
Since static objects do not have a cache reader, when reloading files those
objects are not updated. Currently, the only way to properly reload a file
because of this is to reimport it.
This adds an option to the importer to always add a cache reader, even if
there is no animated data, to ensure that all objects coming from Alembic
archive are linked to them and updated properly upon reloads.
Reviewed by: brecht, sybren
Ref D10197.
This was caused by the blend mode that was used even with full opacity.
This caused issues with the viewport was resized and the color of the
framebuffer becomes undefined, leading to undefined values in the blend
equation.
Another fix would be to clear the viewport color on resize inside the
GPUViewport.
Simplification of BLF code after removal of kerning modes.
See D12262 for more details.
Differential Revision: https://developer.blender.org/D12262
Reviewed by Campbell Barton
This patch removes the "Kerning Style" option for UI widget font
drawing and uses only the current default of "Fitted", since the other
option of "Unfitted" is just the result of truncation errors.
see D12231 for much more information.
Differential Revision: https://developer.blender.org/D12231
Reviewed by Campbell Barton
The main reason for this is to speed up updates by avoid unnecessary
copies as the Generated coordinates are a copy of the vertices.
Creating this attribute may become optional in the future, with UI
parameters to select which attribute to use from the Alembic archive as
reference.
This modifies the attribute lookup to use object coordinates if no
generated coordinates are found on the geometry.
This is useful to avoid creating and copying this attribute, thus saving
a bit of time and memory.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D12238
Vertex normals are needed for normals maps and therefore are packed and send
to the device alongside the other float3 attributes. However, we already pack
and send vertex normals through `DeviceScene.tri_vnormal`.
This removes the packing of vertex normals from the attributes buffer, and
reuses `tri_vnormal` in the kernel for normals lookup for normal maps, which
reduces memory usage a bit, and speeds up device updates.
This also fixes potential missing normals updates following rB12a06292af86,
since the need for vertex normals for normals maps was overlooked.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D12237
Followup to previous commit, rBfffe219bdb8drBfffe219bdb8d
Again this is only for sake of sane ID/overrides managment for now,
the nodetrees themselves are not overridable from user PoV yet.
This reverts rB6899dbef77cd and makes the pointer explicitely
processable by override & diffing code.
Previous changes & fixes have fixed the 'driver-workaround' case afaict.
Note that this only enables proper generic handling of overrides and
their ID pointers, no node property is actually overridable currently.
Embedded IDs (root nodetrees, master collection, etc.) pointer itself is
not editable, but their content may be overridden.
LibOverride code is supposed to know how to handle those embedded IDs.
This should be a no-change commit for now, but is required to enable
initial basic support of nodetrees in library override.
NOTE: Proper full support of liboverrides in nodes is yet to be designed
(has UX unresolved issues, since we likely do not want to expose/make
overridable ALL settings of ALL nodes).
This code checks whether an ID pointer property of an override does not
match its linked reference when it is expected to do so.
This is a goiod indication that a resync is needed.
Previous code would falsy detect overrides of IDs referencing themselves
as needing a resync, when this is not effectively the case.
Caused by {rBbbb1936411a5}.
When adding strips via the new SEQ_add_XXX_strip functions, the
`Editing->seqbasep` pointer was passed around.
Following in `seq_add_generic_update` this `seqbasep` pointer was used
to ensure a unique name.
But `seqbasep` is the pointer to the current list of seq's being edited
(**which can be limited to the ones within a meta strip**).
We need unique names across all strips though (since these are used for
RNA paths, FCurves as reported), so now use the scene's `Editing-
>seqbase` (**which is the list of the top-most sequences**) instead.
Unfortunately this might have screwed files to a borked state, not sure
if this could easily be fixed...
Maniphest Tasks: T90737
Differential Revision: https://developer.blender.org/D12256
Master multiplied the weight paint on top of the rendered image. This
reduced readability.
This patch removes the multiplication for weight painting and adds a
hint of the geometry below the overlay.
Reviewed By: Mets, pablodp606, campbellbarton
Maniphest Tasks: T73434
Differential Revision: https://developer.blender.org/D12170
Removes the artificial requirement that UDIM tile sets start at 1001.
Blender was already capable of handling sparse tile sets (non-contiguous
tiles) so the restriction around starting at 1001 was unnecessary in
general.
This required fixing a few UDIM-related python bugs around manually
updating the `tile_number` field on images as well. See the differential
for details. No script changes are necessary but they will now work,
correctly, in many more cases.
Differential Revision: https://developer.blender.org/D11859
Lowers tile splitting limit so models with extremely dense mesh
portions could still have reasonable performance while for more
common cases the performance impact should be minimal.
Reviewed By: Sebastian Parborg (zeddb), Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12236
When using wireframe opacity, the paint overlay needs to be drawn
before the wireframes in order to alpha blend correctly.
Sculpt overlays were also affected by this, so this commit refactors
this part of the code in case other overlays needs to be added in
the future.
Reviewed By: Mets
Differential Revision: https://developer.blender.org/D12235
There was an unreported bug that switch direction would not switch the order of the vertex group weights. This caused join to do it wrong as well.
Changed to use `BLI_array_reverse` function here to reverse both the normal points and the weights, therefore simplifying the code.
Differential Revision: https://developer.blender.org/D12251
`frame_current_final()` should be used to access the Scene time after
remapping, which also matches how the particles system handles time.
Reviewed By: brecht
Maniphest Tasks: T77307
Differential Revision: https://developer.blender.org/D12239
Standard attributes are not added to the attributes requests when
shaders only have displacement. This is because nodes are only
considering the case when the surface socket is connected.
To support this, added `Shader.has_surface_link()` which checks for both
cases (`has_surface` and `has_displacement`) and replaces all checks on
`Shader.has_surface`.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D12240
This patch adds the missing ability to keep the vertex groups when converting to a grease pencil object. This is increadible useful to create rigged grease pencil objects which move together with rigged meshes.
Differential Revision: https://developer.blender.org/D12249
Reuse existing enums instead of expanding them since it bloats the binary.
The icons enum for example contains over 900 items and was being
expanded 17 times (once for each function that takes an icon argument).
Similar with the event type enum which contains over 200 items and was
duplicated 7 times.
makesrna.c now matches enum definitions from declarations in
RNA_enum_items.h, using their identifiers when found.
The overall space saving on my system is 776kb
(tested with a stripped release build).
Reviewed By: brecht
Ref D12245
This was not working like elsewhere in both NLA and Graph Editor
(meaning that when snapping was already enabled, {key Ctrl} during
transform did not disable it).
Now use getAnimEdit_SnapMode() for this in NLA and GE as well.
Maniphest Tasks: T87173
Differential Revision: https://developer.blender.org/D12244
When adding a range of tiles, the operator could incorrectly calculate
the end_tile. It would not account for the start_tile itself and the
IMA_UDIM_MAX value was 1 too small. This is most noticeable when
attempting to fill the entire supported range of tiles.
Differential Revision: https://developer.blender.org/D11857
Bug caused by integer overflow in ffmpeg_generic_seek_workaround().
Function max_ii() was used to limit int_64tvalue.
After fixing the issue there was another issue, where near-infinite loop
was caused by requested_pos being very large and stream being cut in a
way, that it was missing keyframe at beginning.
This was fixed by checking if we are reading beyond file content.
Reviewed By: zeddb
Differential Revision: https://developer.blender.org/D11888
Refactor and improve waveform drawing.
Drawing now can use line strips to draw waveforms instead of only
triangle strips. This makes us able to properly visualize thin waveforms
as they would not be visible before. We now also draw the RMS value of
the waveform.
The waveform drawing is now also properly aligned to the screen pixels
to avoid flickering when transforming the strip.
Reviewed By: Richard Antalik
Differential Revision: https://developer.blender.org/D11184
The duration and start time for audio strips were not correctly read in
audaspace.
Some video files have a "lead in" section of audio that plays before the
video starts playing back. Before this patch, we would play this lead in
audio at the same time as the video started and thus the audio would not
be in sync anymore.
Now the lead in audio is cut off and the duration should be correctly
calculated with this in mind.
If the audio starts after the video, the audio strip is shifted to
account for this, but it will also lead to cut off audio which might not
be wanted. However we don't have a simple way to solve this at this
point.
Differential Revision: http://developer.blender.org/D11917
The seek pts was not correctly calculated.
In addition to that we were not seeking in the video pts time base.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11921
The video duration was not read correctly from the video file.
It would use the global duration of the file which does in some cases
not line up with the actual duration of the video stream.
Now we take the video stream duration and start time into account when
calculating the strip duration.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11920
If the add strip operator errored out, we wouldn't free custom data allocated
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11919
Before we didn't encode the audio up until the current frame.
This lead to us not encoding the last video frame of audio.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11918
We didn't flush audio after encoding finished which lead to audio
packets being lost.
In addition to this the audio timestamps were wrong because we
incremented the current audio time before using it.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11916
Replaces the boolean option with enum menus for consistency
with the subdivision modifier (rB66151b5de3ff,rB3d3b6d94e6e).
Adds all UV interpolation options.
Original patch by Eitan. Updated by Himanshi Kalra <calra>.
{F9883204}
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D10417
Add color data type comparison for meshes, adding it as
part of comparing meshes with geometry nodes applied.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D12192
blf_kerning_cache_new was performing many unnecessary hash lookups,
calling blf_glyph_search 32768 times. Use a lookup table to reduce this
to the number of ASCII characters (128 calls).
This addresses reduced visibility of scenes (as displayed in the VR
headset) that can result from the 8-bit color depth format currently
used for XR swapchain images.
By switching to a swapchain format with higher color depth (RGB10_A2,
RGBA16, RGBA16F) for supported runtimes, visibility in VR should be
noticeably improved.
However, current limitations are lack of support for these higher
color depth formats by some XR runtimes, especially for OpenGL.
Also important to note that GPU_offscreen_create() now explicitly
takes in the texture format (eGPUTextureFormat) instead of a
"high_bitdepth" boolean.
Reviewed By: Julian Eisel, Clément Foucault
Differential Revision: http://developer.blender.org/D9842
This patch turns off the preloading of ascii glyphs and instead caches
each glyph the first time it is actually used.
See D12215 for much more detail.
Differential Revision: https://developer.blender.org/D12215
Reviewed by Campbell Barton
This patch makes some non-functional changes to BLF code. Some size
defines added, comments changed, simplification of macro
BLF_KERNING_VARS.
See D12200 for more details.
Differential Revision: https://developer.blender.org/D12200
Reviewed by Campbell Barton
Some of the enum options in the context menu operations are not
supported for all element types.
`TSE_SEQUENCE`, for example, only supports the `Select` option.
So, populate the enum list dynamically depending on the type.
Also add some calls that were missing for the `TSE_SEQUENCE` type.
(`WM_event_add_notifier` and `ED_undo_push`).
There was already some code for that, but it was broken, and proper
resync was completely missing.
There might still be more resync needed in library linking operators
though.
Add a debug-only check regarding consistency of the cache (mapping from
objects to their bases) for a given ViewLayer.
Issues can happen otherwise when some code does remapping of objects,
and forgets to call `BKE_main_collection_sync_remap()` (which clears
those caches) instead of `BKE_main_collection_sync()`.
channel names
Working with multiple strips keyframes was unneccessarily difficult in
Animation Editors (since some anim channels could not be distinguished).
Namely `Crop` and `Transform` are nested structs (nested under
`Sequence`), so these were just displaying the raw struct name.
Also strip modifiers did not have their strip name in their channel
names. Now include the strip name for these.
before
{F10277439}
after
{F10277441}
Maniphest Tasks: T90595
Differential Revision: https://developer.blender.org/D12193
While trying to get Blender 2.93.x LTS to build fine on all release architectures in Debian, I noticed that the misleading use of "mips" as integer variable caused problems when compiling on mips64el. The patch should fix the issue.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D12194
This reverts commit 41e6509818.
This broke "CubeMaskFirst" test.
Any value even slightly outside the [-1.0..1.0] range
caused the result to be nan, which can happen when calculating
the dot-product between two unit length vectors.
When in NLA tweak mode, the action unlink button in the Dopesheet /
Action Editor should be a mere shortcut to exiting tweak mode [nothing
else].
Instead, it was also clearing the action fully, not returning to the
previous edited action before going into tweak mode.
Now dont "flush" by clearing the action, instead exit tweakmode, clear
the scenes SCE_NLA_EDIT_ON flag (if this isnt done some NLA operators
like pushdown were not immediately available because their poll checked
this flag) and send appropriate notifier to have everything update nicely.
Part of T87681 (Bug 4/5/6).
Maniphest Tasks: T87681
Differential Revision: https://developer.blender.org/D11052
Animation indicators as well as decorators for properties were not
updating correctly in the following cases:
- NLA pushdown (this was reported in T87681)
- NLA enter/exit tweakmode
- Outliner unlinking/setting action
These actions all send a ND_NLA_ACTCHANGE notifier which the Properties
Editor was not listening to [which is now added].
part of T87681.
Maniphest Tasks: T87681
Differential Revision: https://developer.blender.org/D11040
This change reduces the GPU context switches when drawing keyframes.
In the previous situation the keyframe blocks and keyframe keys were
drawn per channel. With this patch first all the keyframe blocks are
drawn for all channels and after that the keyframe keys are collected
for all channels and send to the GPU in a single draw call.
This was left over from when these scripts were loaded as modules,
where their names needed to be compatible with Pythons module naming.
Version patch existing files so text with register enabled
without a `.py` extension wont start executing on startup.
Resolves T89532.
This supported calculating normals for MPoly array which was copied to
an MFace aligned array.
Remove the functions entirely since MFace use is being phased out and
these function isn't used anywhere.
Use BKE_mesh_calc_normals instead of
BKE_mesh_calc_normals_mapping_simple for curve modifier calculation.
This only made sense for derived-mesh which is no longer used.
Remove the 'only_face_normals' argument.
- BKE_mesh_calc_normals_poly for polygon normals.
- BKE_mesh_calc_normals_poly_and_vertex for poly and vertex normals.
Order arguments logically:
- Pair array and length arguments.
- Position normal array arguments (to be filled) last.
Optimize mesh normal calculation.
- Remove the intermediate `lnors_weighted` array, accumulate directly
into the normal array using a spin-lock for thread safety.
- Remove single threaded iteration over loops
(normal calculation is now fully multi-threaded).
- Remove stack array (alloca) for pre-calculating edge-directions.
Summary of Performance Characteristics:
- The largest gains are for single high poly meshes, with isolated
normal-calculation benchmarks of meshes over ~1.5 million showing
2x+ speedup, ~25 million polygons are ~2.85x faster.
- Single lower poly meshes (250k polys) can be ~2x slower.
Since these meshes aren't normally a bottleneck,
and this problem isn't noticeable on large scenes,
we considered the performance trade-off reasonable.
- The performance difference reduces with larger scenes,
tests with production files from "Sprite Fight" showing
the same or slightly better overall performance.
NOTE: tested on a AMD Ryzen TR 3970X 32-Core.
For more details & benchmarking scripts, see the patch description.
Reviewed By: mont29
Ref D11993
The poll for unlinking calls `nla_panel_context` without providing an
adt pointer, and there is a check for this pointer in
`nla_panel_context` leading to never returning true if it is not
provided. (this is fine if there are tracks already, poll would succeed
in this case, `nla_panel_context` goes a different code path then)
Same call to `nla_panel_context` is also done in the beginning of the
corresponding unlink exec function (but this time providing the pointer
because it is used later), so it makes sense to do the same thing in the
poll function. Equal check is also done in the panel poll function, so
now these are all in sync.
Part of T87681.
Maniphest Tasks: T87681
Differential Revision: https://developer.blender.org/D11041
Was reported for a file which does not have an active track set in
AnimData even though it was in strip twek mode (but this was accessed in
is_nlatrack_evaluatable()).
Root cause for this is not totally clear, but I assume the situation is
described as part T87681 (and is fixed in D11052).
This patch here just prevents the crash for files that are already in the
borked state.
Reviewers: sybren
Maniphest Tasks: T89805
Differential Revision: https://developer.blender.org/D12085
Clearing the parent from the UI using the X (or from python) clears the
`parsubstr` and set `partype` back to `PAROBJECT`.
Using the Clear Parent operator would leave the `parsubstr` (and thus
`parent_bone`) untouched even though this operator claims to "clear
parenting relationship completely" (it also removes parent deform
modifiers for example).
So now, also clear `parsubstr` and set back to `PAROBJECT` [which is
default].
Maniphest Tasks: T88498
Differential Revision: https://developer.blender.org/D11503
Add Apply Constraint, Duplicate Constraint, and Copy To Selected
operators, and include them in a menu similar to the menu for modifiers.
The shortcuts in the extras menu are also matched to modifiers.
All the here added operators are intended to work exactly like the
analogous ones for modifiers. That means the apply operator should apply
a constraint as if it was first in the list, just like modifiers do. I
have added the same warning message as for modifiers when that happens.
The decision to use this approach of appling the constraint as if it was
first, was made for consistency with modifiers. People are already used
to how it works there. Is also provides more intricate control over the
applied transforms, then just applying all constraints up to that one.
Apply all constraints is already kinda implemented in Bake Animation.
Reviewed By: HooglyBoogly, sybren, #user_interface
Differential Revision: https://developer.blender.org/D10914
During the processing of a continuous drag event, other mouse move
events may be in the queue waiting to be processed.
But when a mouse wrapping happens, these waiting mouse move events
become out of date as they report a mouse position prior to wrapping.
The current code ignores these events by comparing their `timestamp` to
the time recorded in the last mouse wrapping.
The bug happens because the computed value in
`mach_absolute_time() * 1e-9` for some reason is incompatible with the
value of `[event timestamp]`.
Since macOS 10.6, we have a new way to get the amount of time the
system has been awake. `[[NSProcessInfo processInfo] systemUptime]`.
Using this updated method fixed the problem.
Differential Revision: https://developer.blender.org/D12202
Clearing the window was done in wm_file_read_post which was deferred.
This was needed as it left the context in an invalid state
where the window was set but the screen wasn't.
Crashing when setting up keymaps that attempted to access the
scene from the window in the property update function.
Regression in 497bc4d199
Add RNA_struct_type_find_property_no_base for use in the rare situations
when this isn't desired.
Resolves T90617, where sequence strip sub-types weren't detecting
properties that exist in the base "Sequence" types.
- Remove old comment for editors with weak syntax highlighting.
- Remove disabled code to initialize Blender with a file path.
- Remove file name references to function names since these
were outdated, modern development environments can look up this info.
Resolve order of initialization error reading startup file,
support postponing running wm_file_read_post until Blender
has been initialized.
Deferring updates allows duplicate initialization
to be removed from WM_init.
Reviewed By: mont29
Ref D12184
Makesdna fails to detect issues in 32 bit code that can
only be resolved by adding a padding pointer.
We never noticed since we ourselves no longer build for
32 bit, but debian's 32 bit builds got bitten by this
A rather extensive explanation on why this is alignment
requirement is there can be found in this comment:
https://developer.blender.org/D9389#233034
Differential Revision: https://developer.blender.org/D12188
Reviewed by: sergey, campbellbarton
Some of the dna structs were not properly
aligned for 32 bit builds causing issues
for some of the 32 platforms Debian builds
for.
Reviewed By: sergey, brecht
Differential Revision: https://developer.blender.org/D9389
The loading of a font size or style renders bitmaps of the characters
0-255 and stores them in a cache. But glyphs 128-255 in this cache are
not accessible. What used to be ansi high-bit characters are now multi-
byte UTF-8 sequences.
Therefore this patch reduces the glyph_ascii_table size to 128 and
only caches characters 32-127, the visible portion of ASCII, which
greatly reduces the time to load a font.
See D12189 for more details.
Differential Revision: https://developer.blender.org/D12189
Reviewed by Campbell Barton
Before this commit rendering material icons the floor will is hidden.
This reduces the readability of reflective/refractive materials.
check patch for additional screenshots and notes.
This patch will switch the floor material that uses ray visibility tricks to render a floor for reflective rays.
Eevee uses screen space reflections that makes this a different problem. There is nothing else drawn in
the scene in screen space so we need a different trick. Using math we convert a reflective ray to UV space
and generate a world that projects a checker pattern to infinity.
As now the floor is in the world it is being reflected via
a cubemap. As the film is transparent the background (including the floor isn't rendered)
In the future when Eevee supports vulkan raytracing we can re-evaluate and perhaps remove this
approximation.
We tried lightprobes but that wasn't able to do the trick.
Using the compositor would lead to more memory usage (render layers and intermediate buffers) and slower performance.
Solution has been validated with Simon
Reviewed By: sybren, Severin
Differential Revision: https://developer.blender.org/D11988
To improve the presentation of nodes in the node editor. Recognize the
following metadata from the OSL specification:
* [[ string label = "UI Label" ]]
* [[ string widget = "checkBox" ]]
* [[ string widget = "boolean" ]]
Ref T89741
Differential Revision: https://developer.blender.org/D12074
Idea for 3.0 is to disable all functionality that isn't well polished
and focus on those parts first. Starting with poses.
* Adds a new experimental option "Extended Asset Browser", replacing
"Asset Browser".
* Unlike the previous option, this isn't enabled by default anymore.
This didn't work well in practice and caused plenty of confusion.
* "Mark as Asset" and "Clear Asset" are hidden if the option is
disabled.
* Same for the category selection in the Asset Browser.
* Always show display the "Only Assets" option in the File Browser while
browing inside .blend files. That way you can hide data-blocks that
are not pose assets.
* The Asset Library setup UI in the Preferences is always visible now,
it's needed for pose library access.
Addresses T90181, T90180 and T90300.
Differential Revision: https://developer.blender.org/D12120
ID data-blocks that could be accessed from Python and weren't freed
using BKE_id_free_ex did not release the Python reference count.
Add BKE_libblock_free_data_py function to clear the Python reference
in this case.
Add asserts to ensure no Python reference is held in situations
when ID's are copied for internal use (not exposed through the RNA API),
to ensure these kinds of leaks don't go by unnoticed again.
Using high quality normals for vertex offset when set
for higher precision offsets.
This was only used for calculating even-offset.
Reviewed By: campbellbarton
Ref D12176
This is a slight refactoring of the Win32 IME code to remove the use of
Language IDs, which is now strongly deprecated. Instead this uses the
new recommended Locale Names, ie ISO-639-1 2-letter abbreviated names
like "en" for English rather than ID 0x09.
See D12143 for more details.
Differential Revision: https://developer.blender.org/D12143
Reviewed by Ray Molenkamp
bounding boxes
These are namely 'LIGHT', 'CAMERA', 'EMPTY', 'SPEAKER' and 'LIGHTPROBE'.
Note that Empties are included here despite the fact that they have
instancing capabilities ('Display As' can be 'Bounds' for example which
then displays all instanced geometry with boundingboxes -- this however
is not meant to work with the 'Bounds' checkbox and the display bounds
type, these are only affective for the object itself, not its instances)
Issue came up in T88443.
Maniphest Tasks: T88443
Differential Revision: https://developer.blender.org/D11344
Adds full frame implementation to "Composite", "File Output" and
"Split Viewer" nodes.
The other nodes in "Output" submenu are implemented separately.
No functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12091
Adds full frame implementation to "Alpha Over",
"Hue Saturation Value", "Invert", "Tonemap" and "ZCombine" nodes.
The other nodes in "Color" submenu are implemented separately.
No functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12092
It was only affecting tiled fallback on full frame mode. If tiles from a
constant operation were multi-thread initialized, its buffer
was inflated multiple times.
Adds full frame implementation to "Bokeh Image" node, "Track Position"
node, `SetVectorOperation` and `MovieClipAttribute`.
The other nodes in "Input" submenu are implemented separately.
`MovieClipAttribute` needs resolution to calculate its constant value, it can't be constant folded,
which requires it to be a `ConstantOperation`. Now `ConstantOperation` contemplate this case
and any operation that is always constant without depending on inputs should implement it.
If in the future an operation needs to get an input constant element during
`determineResolution` it must first determine its input resolution.
The nodes have no functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12090
Adds full frame implementation to this node operations.
No functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11751
Adds full frame implementation to this node operation.
No functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11634
Adds full frame implementation to this node operation.
No functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11694
Empties can only instance a collection, instancing on "Vertices" or
"Faces" does not make sense for empties, make that clear in the UI.
ref D11348
Maniphest Tasks: T88443
Differential Revision: https://developer.blender.org/D11349
Basically, only meshes, empties and pointclouds support direct
instancing atm., no need to have the panel for other types.
note: prior to rB2eca054e14b1, collection instancing was possible on all
types (but that was removed in said commit)
note2: for empties, rna_Object_instance_type_itemf should also be
tweaked so we dont get "Vertices" and "Faces" options, but that can be
done in a separate commit
Maniphest Tasks: T88443
Differential Revision: https://developer.blender.org/D11348
Added the comparison of non-generic attributes with generic
attributes in the same loop to avoid issues with different
order in layer->types of the two meshes.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D12149
Caused by {rB37570a73170e}.
Above commit wasnt taking into account that at this point the link could
still be NULL.
Maniphest Tasks: T90564
Differential Revision: https://developer.blender.org/D12180
Right clicking would spawn the context menu under the cursor, but some
operators would actually act on the active asset/file which wasn't
the one clicked on.
When multiple files are selected and one of them is right-clicked on,
selection is not changed to allow operations on multiple files. E.g.
deletion.
This makes the File/Asset Browser match the Outliner (in behavior, not
implementation).
For the right-click selection keymap:
* The context menu still only spawns on W.
* Bonus: Right click now does something, it actually selects files!
I could have done additional changes here to avoid this, but it seems
like a good addition.
This is also a better alternative to rB5edfde58fe60, which didn't work
properly either. Using rename from the context menu would only work if
the clicked on file was also active...
Differential Revision: https://developer.blender.org/D12065
Reviewed by: Campbell Barton
When blender starts and the mouse is over a file/asset browser it
crashes. This is because blender wants to highlight a file, but the
layout isn't initialized yet.
Blender forbids property changes in .draw() methods. But they weren't
caught after a call to .template_list() with a custom list type.
Support nested calls that disallow writes.
Caused by {rBe3faef686d38}.
Error was getting the preview [which wasnt there yet]
These only appeared once the material tab in the Properties Editor was
used (since this ensured a valid preview icon).
Above commit changed behavior for RNA icon getter (this does not create
data anymore), so ensure the preview by hand here.
Maniphest Tasks: T89284
Differential Revision: https://developer.blender.org/D12178
This was really missing there (some COW tags behavior was also
documented in some code using them, like in `sound.c`, but not in their
definition).
Ref. T88555.
Change the dylib folder relative to `Blender` executable to be
the same as before rB652fbc200500497a67bd11d18b786587ba34e3d9 and same
as bpy.so : `@loader_path/../Resources/${BLENDER_VERSION}/lib`
The crash occurred calling because mesh_get_eval_final in edit-mode
freed all derived mesh data without tagging the object for updating.
However meshes in edit-mode weren't meant to be used as knife-project
source-data, adding support for multi object edit-mode caused this.
This makes texture sockets have a label by default. This can be changed
by adding the SOCK_HIDE_LABEL flag to the socket. With this change the
switch node now shows the labels "True" and "False" like for the other
types of sockets.
To be consistent with the image editors and 3D viewport
the cursor location can be changed from the sidebar.
This was missing from the clip editor, but support has been added in this commit.
Previously, the only way to precisely set the cursor was
to call the set cursor operator then use the redo panel to adjust the value.
To be consistent with all other editors the annotation
layers pannel should be placed in a "View Tab".
In my next commit, this tab will be expanded to include other options.
The 2D cursor should be visible in both mask and uv edit modes.
This was likely and oversight when splitting the image editor
into the UV and Image editors
* Revert back to OpenMP 9.0.1 due to bug causing cloth physics test to fail.
* Skip flex build on macOS to avoid link error, only reason we build this is
due to old flex version on Linux CentOS 7.
* Fix PNG cmake argument that expects lowercase on instead of ON.
Ref T90507, T88438
Pass `FileListReadJob` to the `read_job_fn` callback, instead of exploding
the struct into its individual fields, passing those as parameters, and
marking a bunch of those as unused again.
No functional changes.
Caused by fix for T90256 and a misunderstanding in D11928.
Don't skip tagging edges when the auto-smooth angle is 180 degrees
since this skips topology checks which are needed for properly
calculating edge loop normals.
Caused by 4f64fa4f86.
Was a bad backport from the Cycles X branch: the fact that CPU and GPU
has different reset code paths was not taken into account.
`bpy.ops.font.text_insert(text="multiple characters")` wasn't working.
When the text is selected does not correctly insert multiple characters.
- When the text was selected from left to right,
the cursor only move one position next to the selected text.
- When the text is selected from right to left,
a part of the selected text remain.
Ref D12161
- Remove check for screens being None as this would raise an error.
- Replace loop over `area.spaces` with `area.spaces.active`.
- Loop over grease pencil data directly instead of accessing
through the scenes objects.
- Split versioning into functions.
- Use `update_factory_startup_*` prefix for function names
as this isn't versioning existing files.
This commit makes the display options for mask only show in the header for the clip and image editors.
Prior to this change they would display in the header for the clip editor and in the sidebar for the image editors.
This commit does two things, first it removes the proportional editing tool settings.
This is not accessible code and is has not been used since the grease pencil/annotations changes in 2.8.
Second, this patch reorders the if statements so that the display options are always shown on the rightside.
Reviewed By: antoniov
Differential Revision: https://developer.blender.org/D12163
This seems to be really old code from 2.4 or earlier.
I was unable to find when it was removed gitk and git blame both couldnt find anything.
However, it is safe to say that this code is long gone.
Fix poll_message_set API documentation to consistent with Python style
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D12150
This adds support to compile the html python api docs from the command line by running `make doc_py` matching support between windows and unix.
This patch also makes it so the compiler is not needed if you set the `blender_bin` variable, this affects icon generation as well.
In the future, I want to move away from generating the build output in the build directory but that can come in a later change.
Reviewed By: LazyDodo
Differential Revision: https://developer.blender.org/D12144
This is a backport of recent development in the Cycles X branch.
Fixes possible dead-lock in viewport rendering when exiting at an
exact bad moment (couldn't reproduce in master branch, but in the
cycles-x branch it was happening every now and then).
Differential Revision: https://developer.blender.org/D12154
Makes it consistent with the guidelines and the Cycles X branch, and
allows to backport fix for the viewport update from the branch. Will
cause a merge conflict, which should be simple accept-ours in the
branch.
The library has some modifications and it has been included in a diff.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12142
(Some minor changes done in the patch)
In the `FileList` struct, rename the `AssetLibraryReference
*asset_library` field to `asset_library_ref` -- it's a description of
which asset library is used, and not the asset library itself.
This is to make space for a future `AssetLibrary *asset_library` field,
which will point to an actual asset library struct/class.
No functional changes.
Reviewed by: Severin
Differential Revision: https://developer.blender.org/D12151
This corrects code that's currently disabled, see `USE_NURBS` define.
The name passed to `BKE_curve_add` was overwritten,
bypassing uniqueness and utf8 encoding checks.
Longer names would cause a buffer overrun as the length of the source
data was passed to `BLI_strncpy` instead of the destination.
Reviewed By: sybren
Ref D12125
This caused Cycles texture_space_mesh_modifier and panorama_dicing tests to
randomly fail.
The issue was introduced with D11377, due to a missing dependency. Now ensure
we first copy the texture space parameters, and only then use or recompute then.
In general it seems like this dependency should have already been there, since
parameter evaluation includes animation and drivers, and geometry evaluation
may depend on that (even if you would not typically animate e.g. an autosmooth
angle).
Thanks Campbell for tracking this one down.
Although the relevant structs (wmXrRuntime/XrActionMap/
XrActionMapItem) are zero-allocated, the selected and active action
map indices need to be initialized to -1 to prevent potential
out-of-bounds list access.
Just like the "Select by Material" node, this node outputs a
boolean attribute for control points that have a matching handle
type. By default left and right handles are considered, but it's
possible to only check one side with the toggle in the node.
Differential Revision: https://developer.blender.org/D12135
Some mesh primitives created using geometry nodes use loops to create
vertices and accumulates positions/angles in FP variables. This allows
rounding errors to accumulate and can introduce significant errors.
To minimize changes from original implementation, variables allowing
errors to accumulate are replaced by: delta * index. Affected Mesh
Primitives nodes are Line, Grid, Cylinder, Circle, Cone, and UV-Sphere.
Differential Revision: https://developer.blender.org/D12136
Assigning a mesh seems to do its own parameter copying, which
means we need to manual copy its vertex groups here, which was
just overlooked in rB3b6ee8cee708.
Differential Revision: https://developer.blender.org/D12110
Generic attributes CD_PROP_* comparison is added in customdata_compare
Checks for built-in as well as user created attributes.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D12137
The Xcode IDE can also benefit from the options:
- WINDOWS_USE_VISUAL_STUDIO_SOURCE_FOLDERS
- WINDOWS_USE_VISUAL_STUDIO_PROJECT_FOLDERS
So add suport to these options and also renames them as they are no
longer limited to just Windows and Visual Studio.
Reviewed By: brecht, ankitm
Differential Revision: https://developer.blender.org/D12132
Practice shows that when combining actions and direct animation
it is usually best to combine location, rotation and scale
separately, which is implemented by the Split Channels modes
recently introduced in D9469 for Copy Transforms. This completes
the same set of 6 choices for the Action Constraint.
The default for new constraints is changed to the newly
added Before Original (Split Channels) mode.
The original patch is motivated by Loic Pinsard, who created
an addon that does the equivalent of this feature by splitting
the action into two, separating location and rotation+scale.
Differential Revision: https://developer.blender.org/D7547
The exception to automatically pin vertices of grid corners also
has to take into account that the vertex is in a boundary.
Reviewed By: JacquesLucke
Maniphest Tasks: T90235
Differential Revision: https://developer.blender.org/D12044
The active geometry element are usually updated by the cursor drawing
code (as they are needed for the cursor preview) and when an sculpt
operator starts. For brushes, this was not happening. This was making
brushes rely by default on the last cursor drawing update, which can
be incorrect if the mouse moved after starting the stroke without
hovering the active geometry.
Reviewed By: JacquesLucke
Maniphest Tasks: T90236
Differential Revision: https://developer.blender.org/D12045
Add warning(info) to nodes that don't work when an input value is
out of range. For example, the grid node doesn't work with Vertices X
or Verices Y less than 2.
These are purposefully added as "Info" warnings, because they don't
show in the modifier and they aren't printed to the terminal.
Differential Revision: https://developer.blender.org/D11923
The immediate reason for this is that we want to be able to initialize them
to different defaults for light objects, which is hard with Python properties.
But in general it is useful to be able to share these with other renderers.
As a side effect, Eevee now supports a per-object holdout instead of only
per-collection.
Differential Revision: https://developer.blender.org/D12133
Code freeing the array would not properly reset its length value to
zero.
Note that this corrupted data could also be saved in .blend files, so
had to bump fileversion and add some doversion code too.
Fix T90166: crash when creating a liboverride.
This was apparently done in two places only, with a very cryptic comment
(`/* for raw_access, untested */`), and... I cannot see how returning a
non-zero length value for an array that does not exist or is not
accessible at least, would be anything but an obvious source of issues.
Note that both commits adding those lines are from stone ages (2009):
rBcbc2c1886dee and rB50e3bb7f5f34.
The keymap is available in: Draw, Edit, Sculpt, Weight Paint and Vertex Paint modes.
The keymap is not available in Object mode to avoid any conflict.
Reviewed By: pepeland
Differential Revision: https://developer.blender.org/D12128
This is a simple engine used only to debug the texture of select ids.
It is only used when the `WITH_DRAW_DEBUG` option is enabled and the
debug value is 31.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D5490
Addresses the remaining portions of T77137 (Python API for Controller
Interaction), which was partially completed by D10942.
Adds an XR "action maps" system for loading XR action data from a
Python script. Action maps are accessible via the Python API, and are used
to pass default actions to the VR session during the
xr_session_start_pre() callback.
Since action maps are stored only as runtime data, they will be
cleaned up with the rest of the VR runtime data on file read or exit.
Reviewed By: Julian Eisel, Hans Goudey
Differential Revision: https://developer.blender.org/D10943
This is not supported currently,doing so through RNA API remains
possible, but from regular UI operations it should not be doable
anymore.
Ref. T90459.
LibOverride of scenes is not really supported currently, there are many
issues with it.
Will disable most user-accessible ways to create such overrides in a
following commit.
Provides two key improvements to runtime controller data.
1. Separates controller poses into two components, "grip" and "aim",
which are both required to accurately represent the controllers
without manual offsets.
Following their OpenXR definitions, the grip pose represents the
user's hand when holding the controller, and the aim pose represents
the controller's aiming source.
2. Runtime controller data is now stored as a dynamic array instead
of a fixed array. This makes the API/functionality more adaptable to
different systems.
Does not bring about any changes for users since only internal
runtime functionality is currently affected.
Reviewed By: Julian Eisel
Differential Revision: http://developer.blender.org/D12073
Vertices with no connected faces would attempt to divide by the combined
face area causing a divide by zero.
Use the same weight for wire vertices as vertices connected
to zero area faces.
Protect this accessor with a local static mutex when it needs to
create/write data.
Ideally accessors should never create or modify data, but there are some
cases where this bad behavior is currently unavoidable.
This is the case of the Pointer accessor when the actual IDProperty has
not yet been created.
NOTE: this fixes a memory leak in liboverride diffing process when
several different overrides use a same linked reference ID.
Differential Revision: https://developer.blender.org/D12060
Even though the ID itself remain the same after being made local, from
depsgraph point of view this is a different ID. Hence we need to tag all
of its users for COW update, as well as rebuild depsgraph relationships.
Should be also backported to LTS 2.93 (and 2.83 if possible).
Negative indices that remained negative after adding the sequence length
caused incorrect slicing.
With the default scene for example:
bpy.context.scene.objects[-4:2]
Gave a different result to:
tuple(bpy.context.scene.objects)[-4:2]
Clamp indices above zero so loops that step forward works as intended.
Provides several important improvements to the runtime action
bindings operation and internal API.
Moves input-specific action data (input thresholds, input regions,
pose offsets/spaces) from actions to more granular action bindings.
This allows a single action to be mapped to a variety of inputs,
without having to share a single input threshold, region, or space.
Also removes the need for action space creation API, as spaces for
pose actions will be automatically created with the bindings.
The correct action data for the current inputs is set by calling
xrGetCurrentInteractionProfile() to get the current profile and then
retrieving the corresponding mapped data.
Does not bring about any changes for users since only internal
runtime functionality is currently affected.
Reviewed By: Julian Eisel
Differential Revision: http://developer.blender.org/D12077
This adds support for building the icons from make.bat
unlike bash there is no passing environment variables
on the command line.
The scripts go out of their way to locate both blender
and inkscape however if they are not found, the user is
given a helpful error message telling them how to set
the variables.
Although some extra help can be given there, if your
normal build is a 2019 full build running
`make 2019 full icons`
will help it find the blender executable as well.
finally if you know the name of your build folder
running
`make builddir build_windows_Lite_x64_vc16_Release icons`
will also work, if all fails you can point directly to
the blender executable by running
`set BLENDER_BIN=c:\where\blender\lives\blender.exe`
before running `make icons` or `make icons_geom`
The python scripts needed some small modifications since
without the PATHEXT, SystemRoot and SystemDrive
environment variables python will not initialize properly
on windows. (Not blender related, even mainline python
won't start without those)
GHOST_ImeWin32::SetInputLanguage() has a confusing name because it does
not set the input language. It actually retrieves the current input
locale from the OS and caches the value of the current input language
ID. Therefore this patch renames it to "UpdateInputLanguage"
Differential Revision: https://developer.blender.org/D12134
Reviewed by Ray Molenkamp
This removes one member of GHOST_ImeWin32 that is not used and cannot
be used in the future. It is holding the result of ImmIsIME, which is
whether an input language supports IME. It does not indicate that one
is in use, turned on, composing, in English mode, etc.
see D12131 for more information.
Differential Revision: https://developer.blender.org/D12131
Reviewed by Ray Molenkamp
This makes the internal naming consistent with the public API. And also gives
us a visibility_flag rather than restrictflag that can be extended with more
flags.
This patch makes us less restrictive on the allowed types of FreeType
font character maps we allow, rather than primarily unicode-only. This
allows us to use some legacy, symbol, specialty, and proprietary fonts
like Wingdings. Note we were a little less restrictive with vfonts,
used for 3D Text Objects, so this patch primarily helps VSE.
See D12124 for details and examples.
Differential Revision: https://developer.blender.org/D12124
Reviewed by Brecht Van Lommel
When displaying the names of fonts for 3D Text objects, use the same
format as shown in File Browser: Family name + Style name. They are
currently shown with Postscript Name, which doesn't match well.
see D12069 for more details.
Differential Revision: https://developer.blender.org/D12069
Reviewed by Campbell Barton
The goal: allow to easily use AO approximation in scenes which combines
both small and large scale objects.
The idea: use per-object AO distance which will allow to override world
settings. Instancer object will "propagate" its AO distance to all its
instances unless the instance defines own distance (this allows to
modify AO distance in the shot files, without requiring to modify props
used in the shots.
Available from the new Fats GI Approximation panel in object properties.
Differential Revision: https://developer.blender.org/D12112
This is used to set the default caps type for the stroke. Before always was rounded and only could be changed later in Edit mode
Two new buttons has been added to topbar.
NOTE: New icons are been designed (T90414)
The buttons are expanded to list in Properties panel.
Reviewed By: mendio, HooglyBoogly
Differential Revision: https://developer.blender.org/D11999
rBfb87d236edb7 made the values returned by `projmat_dimensions` more
standardized following the documentations. But the functions in Blender
that called `projmat_dimensions` followed a proposal that these values
corresponded to a distance of 1m of clip.
Adjust these functions to follow the new algorithm.
This patch fixes an issue with missing faces when assigning a material slot other than the first to faces on AMD TAHITI cards. Refer to T78390 and T74024 for a description of this issue.
This patch also incorporates fix from T78390 for KAVERI.
{F9029258}
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D9305
Rename new API function introduced in recent rB3b0fab6dfaa0 to match our
convention to put the action (verb) at the end of names:
`operations_update`.
Sorry for not catching that during review.
Previous check was too blunt, preventing e.g. re-organization of
collection overrides inside a local parent collection, which is
perfectly valid operation.
Reported by @hjalti from the studio, thanks!
Loopcut drawing from gizmo had thicker lines because
it was using line smoothing without alpha blend, compared
to thin jagged lines from operator.
Make the drawing anti aliased and consistent by using
3D_POLYLINE/3D_POINT shaders, and making sure alpha
blending is on.
Reviewed By: #eevee_viewport, fclem
Differential Revision: https://developer.blender.org/D11333
While most modifies don't handle out of memory cases, ocean simulation
could attempt huge allocations: 2048 gb at the maximum resolution.
Resolves T83952.
The update_operations function will update the override structure of the
local object. When working with overrides the override structure is only
updated when the work-file is stored. When using scripts you might want
to enforce the update of override properties and operations.
This function removes a hack on the test cases.
Reviewed By: mont29
Maniphest Tasks: T86656
Differential Revision: https://developer.blender.org/D10848
This patch changes the drop named material tooltip to give feedback to
the user what is going to happen when they invoke the change.
There are 3 states:
* "": Operator will be canceled as not all data is present (dropping on
background.)
* "Drop <named material> on <object name> (slot <slot number>, replacing
<current material in slot>).
* "Drop <named material> on <object name> (slot <slot number).
Reviewed By: Severin
Maniphest Tasks: T90371
Differential Revision: https://developer.blender.org/D12106
This node sets the selected (or all) splines in curve to a chosen target
spline type. Poly, Bezier, and NURB splines can be converted to any of
the other types. This is meant to be a building block node, useful in
many procedural situations.
In the future the node could be optimized with multi-threading, or by
avoiding copying in many cases, either by retrieving the curve for write
access or by passing the raw vectors to the new splines where possible.
With edits from Hans Goudey (@HooglyBoogly)
Differential Revision: https://developer.blender.org/D12013
`r_left`, `r_right`, `r_bottom` and `r_top` were ignoring `clip_near` value
when in perspective view.
Also rename `projmat` to `winmat` in these cases.
For some reasons looks like those shortcuts could get out of sync, which
created weird hard to understand building errors.
So for sake of simplicity and security, just re-create them all the
time, just like we update ld paths.
For Blender.app: dropping libomp.dylib next to Blender executable is
enough for it getting picked up since `@executable_path` is an rpath.
For non-distributed binaries datatoc, makesdna, tests etc, code for
copying libomp.dylib to build folder is removed and replaced by
CMake's rpath option for *build* tree.
For bpy.so, the post build rpath change has also been replaced by CMake
rpath option for *install* tree.
Since -id has been changed in D11748, remove the
`install_name_tool -change ...` command.
Any dylib can just be dropped at `MAC_BLENDER_TARGET_DYLIBS_DIR`
hereafter. Appending dylib path to `CMAKE_BUILD_RPATH` will be needed
for datatoc etc if linked against one (instead of copying the
dylibs around).
Reviewed By: #platform_macos, brecht
Differential Revision: https://developer.blender.org/D11997
While this was already the case for the most part
some selection operators stored common settings for reuse such as
"toggle", "extend" & "deselect".
Disabling storing these settings for later execution
as it means failure to set these options in the key-map re-uses
the value of the shortcut that was last called.
Skip saving these settings since this is a case where reusing them
isn't helpful.
Resolves T90275.
Fix division by zero when `BKE_bone_parent_transform_invert()` inverts a
scale vector with zero components.
Zero values in the to-be-inverted vector are now simply skipped, i.e.
remain zero after inversion. This at least ensures that
`invert_v3_safe(invert_v3_safe(vector))` results in the same vector.
This commit does NOT fix the conceptual problem that an inversion of a
potentially non-invertible vector is relied upon. It just avoids the
division by zero.
When channels are scrolled to be (partially) behind the search bar,
their widget buttons would still be interactive, preventing the seach
buttons to be usable.
We have to make sure the events are consumed from the search and dont
reach other UI blocks.
We can do so by flagging the block `UI_BLOCK_CLIP_EVENTS` -- but also
have to make sure the bounds are calculated correctly (otherwise the
check relating `UI_BLOCK_CLIP_EVENTS` in `ui_but_find_mouse_over_ex` wont
trigger properly.
Maniphest Tasks: T90364
Differential Revision: https://developer.blender.org/D12103
When calculating the particle step in `get_effector_tot`, we have to
round up (otherwise we might get an extra round in the for-loop in
`BKE_effectors_apply` for certain cases).
Example from the report:
- 10.000 particles, Effector Amount 3
- was rounding the step down to 3333
- going into the for-loop for 0, 3333, 6666 and 9999 (4 times)
- now rounding the step up to 3334
- going into the for-loop for 0, 3334 and 6668 (3 times as desired)
Maniphest Tasks: T90346
Differential Revision: https://developer.blender.org/D12113
Extend the 'reading error' container to produce the generic short
message in the popup directly visible by the user, and move all detailed
info the `INFO` reports that only show up in the console and Info
editor.
This is an initial implementation of a USD importer.
This work is comprised of Tangent Animation's open source USD importer,
combined with features @makowalski had implemented.
The design is very similar to the approach taken in the Alembic
importer. The core functionality resides in a collection of "reader"
classes, each of which is responsible for converting an instance of a
USD prim to the corresponding Blender Object representation.
The flow of control for the conversion can be followed in the
`import_startjob()` and `import_endjob()` functions in `usd_capi.cc`.
The `USDStageReader` class is responsible for traversing the USD stage
and instantiating the appropriate readers.
Reviewed By: sybren, HooglyBoogly
Differential Revision: https://developer.blender.org/D10700
The file selection parameters (e.g. `context.space_data.params`) are
expected to be unset in certain cases. Reading 2.4 files seems to be one
of them. Hence, code using it should check it's set first. Also added an
assert to a File Browser UI template printing a message when the
parameters are unset, to help debugging the issue.
Only the "changed" state from the last edit-object was used,
this meant the operator would not perform the necessary update
with multi-object edit-mode.
Use "changed" & "changed_multi" naming convention.
Even though lights were part of `SceneStats`, they were not used when
rBfd10ac9acaa0 was committed.
This patch adds the light count back into the statistics. When a light is
the active object, it will display the total number of lights in the
scene, as well as how many lights are currently selected.
{F10141354}
Reviewed By: #user_interface, Severin, Blendify, harley
Maniphest Tasks: T88512
Differential Revision: https://developer.blender.org/D11387
For T78995 we want to change the data structure of keylists to
improve performance. (Probably a Vector with bin-search capabilities).
This patch hides the internal structure of the keylists behind `AnimKeylist`
structure. This allows us to change the internals without 'breaking' where it is
being used.
The change adds functions to create, free, find and walk over the
keylist.
Reviewed By: sybren
Maniphest Tasks: T78995
Differential Revision: https://developer.blender.org/D11974
Currently when dropping an asset the first material slot is always updated.
This patch changes that logic to update the active material slot.
In future the behavior will be updated to use the material slot of the face under the cursor.
That requires better feedback tot he user.
Reviewed By: Severin
Maniphest Tasks: T90372
Differential Revision: https://developer.blender.org/D12056
Setting normals from faces wasn't weighting the faces contribution
by the corner angle, giving lop-sided results in some cases.
This removes the epsilon check for CLNORS_VALID_VEC_LEN,
in favor of matching the behavior of vertex normals exactly.
It will be useful in the spline type conversion node. Theoretically it
could become protected again if that conversion moves out of a node,
which might be a nice improvement after an initial version.
Because mesh vertex and face normals are just derived data, they can
be calculated lazily instead of eagerly. Often normal calculation is
a relatively expensive task, and the calculation is often redundant
if the mesh is deformed afterwards anyway.
Instead, normals should be calculated only when they are needed. This
commit moves in that direction by adding a new function to tag a mesh's
normals dirty and replacing normal calculation with it in some places.
Differential Revision: https://developer.blender.org/D12107
This commit uses OpenVDB more directly for the voxel remesher, without
the extra indirection of copying to a Blender API. This makes the code
simpler, shorter, and easier to understand (though I didn't observe any
performance improvement).
This also removes the rest of the unused and undocumented OpenVDB C API,
which was written when Blender's code didn't really use C++, and doesn't
serve a purpose anymore. Those features will be implemented as nodes in
the future anyway (see D12100).
Differential Revision: https://developer.blender.org/D12097
Caused by rB7fc60bff14a6.
This has actually been reported and closed, but that was clearly a
misunderstanding (above commit changed a checkbox to be an enum, but a
second checkbox was simply removed)
Maniphest Tasks: T78469
Differential Revision: https://developer.blender.org/D12084
This is causing issues for some users launching Blender, because EGL indirectly
requires GLVND, which is not installed by default on e.g. Ubuntu.
This reverts commit 0b18a618b8.
Fixes T90374
Ref D12034
Caused by {rBbbb2e0614fc3}
Since above commit only the playhead is updated as an overlay in
animation playback (was moved out of drawing of the main region for
perfomance reasons).
The driver value "debug" visualization is very useful to have during
playback though but was left in main region drawing as part of
`draw_fcurve` (thus does not update in realtime anymore).
Moving `graph_draw_driver_debug` into the overlay is not feasible
because it requires animation filtering which has significant overhead
which needs to be avoided in the overlay which is redrawn on every UI
interaction.
Now tag the whole main region for updates in the Driver Editor during
playback instead (which will make the Drivers Editor as slow during
playback as before rBbbb2e0614fc3 -- but with realtime updates of the
debug visualization).
Maniphest Tasks: T87041
Differential Revision: https://developer.blender.org/D12003
Add a context menu dedicated to asset operations to the Asset Browser.
There are two separate context menus to keep things separated well and
avoid confusing if-else logic (similar to D12057 & D12059). Their polls
make sure they are displayed for the right contexts only.
Also (to be committed as followup cleanup): Remove now unused special
handling for assets in file delete operator.
Differential Revision: https://developer.blender.org/D12062
So far the Asset Browser just showed the same popups and settings as the
File Browser. Not all of them made sense for the Asset Browser though.
* Don't show inapplicable recursion toggle.
* Don't show sorting options, which don't work with assets anyway.
* Don't show the Filter popover, there are currently no applicable items
in there.
Just like in D12057, I decided to add separate classes for the Asset
Browser case.
Differential Revision: https://developer.blender.org/D12059
So far the Asset Browser just showed the same menus as the File Browser.
Not all of their entries made sense for the Asset Browser though. I
decided to just give them entirely different classes to avoid confusing
if-else checks everywhere. I think the code duplication this adds is a
minor issue, it's better to keep things seperated clearly IMO.
* View menu: Add "Asset Details" toggle for the sidebar region.
* View menu: Remove recursion sub-menu
* View menu: Remove "File Path" region toggle, which doesn't apply for
the Asset Browser.
Differential Revision: https://developer.blender.org/D12057
Originally the operator name was drawn next to the dragging content.
After that there was an option to add custom, static text with the
dragging content. This patch allows dynamic text to be drawn.
The custom text was implemented as out parameter of the poll function
what made the code unclear. This patch introduces a tooltip function
that separates tooltip generation from the poll function.
NOTE: the text should always be returned in its own memory block. This
block will be freed after it is copied in the drag struct.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D12104
`CPPType` can wrap any C++ type so that code can work
with the wrapped type in a generic way. The goal of subclassing
`CPPType` is to provide additional methods for some types.
For example, the `CPPType` for `Array<int>` could have a `.element_type()`
method that returns the `CPPType` for `int`.
Initial, limited implementation of loading a single asset catalog
definition file. These files are structured as follows:
CATALOG_ID virtual/path/of/catalog
SUBCATALOG_ID virtual/path/of/catalog/child
SOMETHING_ELSE some/unrelated/hierarchy
These virtual paths will be used to show the catalog in a tree
structure; the tree structure itself is not part of this commit. Each
asset will have one catalog ID that determines where in that tree the
asset shows up.
Currently only a single catalog definition file can be read; merging
data from multiple such files, and writing them out again after changes
are made, is for future commits.
This commit only contains the code to load a single file, and unittests
to check that this actually works. No UI, no user-facing functionality
yet.
The real fix here is to use some kind of relative error in `customdata_compare`
instead of the absolute error used now. If vertex coordinates get larger in magnitude,
the allowed error should increase as well.
When entering characters using IME on Windows, Japanese and Chinese
will both usually result in the first keystroke being duplicated. The
problem is that we are informed too late, after the first key is
pressed, that we are IME composing. This patch ensures we are entering
non-English characters using ImmGetConversionStatus() and then deals
with editing keys (like arrows and backspace) on a per-language basis.
see D11929 for more details.
Differential Revision: https://developer.blender.org/D11929
Reviewed by Brecht Van Lommel
Retrieving a mesh's looptris now take's a const mesh after
rB5f8969bb4b4, which removes the need for this function.
Since it's only two lines, avoiding the use of a separate function
in this case is simpler.
These functions do not change their source or input mesh, so it can
be passed with const, which means in one case that a function doesn't
have to be responsible for freeing its argument mesh, which is a clearly
better separation of concerns.
By the patch made it in master the version value already advanced (see https://developer.blender.org/D11839), so this versioning code needs to be moved down to that point.
This BMesh iterator hadn't been used in C++ code yet, and needed
a macro for a proper cast. The parameter structs need to be initialized
when declared without designated initializers.
They are now always shown in the top-level of the Outliner context menu.
Having them in the ID Data submenu was just a hassle to work with, and
often confusing to users - even if technically correct (the asset status
is part of the ID data).
Part of T82680.
These operators shouldn't be available in the Asset Browser.
https://developer.blender.org/T83556
Added a comment to each operator poll assignment to explicitly mention
the intention. That should also remind devs to decide if the operator
should apply for both file & asset browsing when copy & pasting operator
definition code.
The operator to drop file paths into the File Browser was just checking
if there's an active window. This wasn't really an issue since the
operator was only used as drop-operator for the File Browser. But the
operator would show up in the operator search. Plus, for asset browsing,
we'll also have to check the file browsing mode, so the more specific
poll function will be needed.
* Early exit instead of complex if-else blocks.
* Avoid iterating over entire file list.
* Use `true`/`false` for boolean values.
* Declare variables in smaller scopes.
The Windows-specific "Register File Association" operator would show in
the search menu of other platforms. Decided to not disable it at
compile-time, like we do it with "Toggle System Console" (another
Windows-only operator), because that would require workarounds for the
translation tools. Instead the operator poll function always returns
false on unsupported platforms now.
The operator was register as a "file" operator, which are by convention
used for File Browser operators only. Move it to the "preferences"
operators, where it's displayed in the UI too.
This partially reverts cb0b017d8f: We can't store the asset handle in
the drag data, because the file pointer it wraps may be freed as the
Asset Browser generates its file list.
In `BKE_appdir.h`, include `<stddef.h>` as that defines `size_t`. This
follows the "include what you use" principle, and makes it possible to
use `BKE_appdir.h` without having to bother with its dependencies.
No functional changes.
Registering a property could remove the existing property,
then fail to parse one of the arguments of the new property -
leaving the struct without a property.
Now freeing the existing property is deferred until immediately
before the new property is registered.
- Use `default` instead of `def` abbreviation.
- Rename `BPYPropArrayLength` to `BPyPropArrayLength`
in keeping with other local structs.
- Remove _PyArg_Parser.fname value accidentally left in
(harmless as it's not used).
Macros were used for expanding shared logic for some properties.
Replace this with Python converters & a funciton that handles
deferred registration.
Add generic converter functions for RNA enums:
- pyrna_enum_value_parse_string
- pyrna_enum_bitfield_parse_set
After doing an import, the bounding box of the stroke was not calculated and any operation related to brushes (Sculpt, Weight Paint and Vertex Paint) was not working as expected because the bounding box of the stroke was wrong.
This problem was solved automatically after any edit operation, but must be solved in the import process.
This commit resolves these RNA warnings:
```
offset: "", WARN (bpy.rna): ...\source\blender\python\intern\bpy_rna.c:1505 pyrna_enum_to_py: current value '65536' matches no enum in 'FloatProperty', 'offset', 'subtype'
project_limit: "", WARN (bpy.rna): ...\source\blender\python\intern\bpy_rna.c:1505 pyrna_enum_to_py: current value '65536' matches no enum in 'FloatProperty', 'project_limit', 'subtype'
falloff_radius: "", WARN (bpy.rna): ...\source\blender\python\intern\bpy_rna.c:1505 pyrna_enum_to_py: current value '65567' matches no enum in 'FloatProperty', 'falloff_radius', 'subtype'
```
This will replace GLX with EGL for X11. GLEW does not support GLX and EGL
at the same time. Most distributions build GLEW with GLX support, so we
have to use the externally provided GLEW and build with EGL support.
This effectively sets WITH_SYSTEM_GLEW to OFF for all Linux configurations.
Differential Revision: https://developer.blender.org/D12034
In the graph editor, Mirror Keys by Value would convert the value to mirror
over, to account for different units for linear & rotational properties.
The conversion was done in the different direction, though, resulting in
values that were too large by a factor of (180/pi)^2.
This caused a blender load error on windows N,
given we do not use these codecs they can safely
be disabled.
This will fix T90200 once the new libraries are
in SVN
It was somewhat arbitrary to have this one pass enabled that adds a bit of
additional memory and render time overhead, even though it's not necessarily
more important than others.
Before this, all asset view templates showing the same asset library
would show the same assets, even if they should show different ID types.
That was a major limitation since the design did forsee that this
template can be put anywhere in the UI to display various sub-sets of
assets.
Initially I did the ID type filtering close to the asset-list reading,
because I wanted to optimize reading so that we would only actually read
asset information from disk of the ID type to be shown. But this will be
quite complex and I'm not sure if I'll get to work on this anytime soon.
So this commit moves the filtering to the template display level solving
this limitation.
Note: This also adds the code to filter by tags, together with the ID
type. But it's not actually used anywhere yet.
This iterator was introduced before `AssetHandle` existed, so it was
dealing with the file data directly. Now we want as little code as
possible to deal with the file data, all access should happen via the
`AssetHandle`.
This has been a huge pain to get working, for several reasons (new flags
needed, patching is now mandatory, etc.).
Further more, discovered that debian OIIO package is now silently
relying on OpenCV, without even proper handling of this dependency (at
least in the `-dev` package), so had to revert to force-build own OIIO
again on that distro for the time being.
Ref. T88438.
When `BLI_task_parallel_mempool` does not use threading, the
`userdata_chunk` is allocated locally simulating a TLS.
However `func_reduce` is not called so the original chunk is ignored.
`task_parallel_iterator_no_threads` is another function that doesn't call
`func_reduce`. It also ignores `userdata_chunk_local` in the main iterator.
The solution in these cases is not to create a `userdata_chunk_local`.
This fixes T90131
Differential Revision: https://developer.blender.org/D12067
We shipped the whole bin folder for llvm/clang
while we only needed clang-format, by shipping
just the bits we need we save about 700 megabytes
off our svn lib download.
The preview was always using frame 1, but maybe the object has changed and it's better create preview using the current frame.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D12018
Motion attributes expects mesh to have non-zero number of motion steps,
which was violated in the case when fluid mesh had motion blur disabled.
This is a bit of annoying fix, because of the order of updates. More
ideal solution would be to handle cached and fluid velocities in the
sync_mesh_motion() which ensures all the dependencies between settings.
Add overlay option to disable grid drawing.
Reuse drawing code from other editors (timeline editor)
Add argument `display_minor_lines` to function
`UI_view2d_draw_lines_x__discrete_frames_or_seconds`
This way minor line drawing can be disabled and so it doesn't cause
too much visual noise. Also spacing seems to be too fine, so VSE uses 3x
what is defined in preferences.
Reviewed By: fsiddi, Severin
Differential Revision: https://developer.blender.org/D11790
Snapping by default goes against convention, so this setting was
re-evaluated. Also snapping by default can conflict with new image
transform system, see T90156
There wasn't consensus, so disable snapping by default to follow
established convention.
ref T89665
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12054
Calculate frequency of time/frame label drawing, such that labels have
at least 10px margin and don't overlap.
Change timecode format:
- Use at least `mm:ss` format
- Don't display frames if all labels would end with +00
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D11792
The channel box selection was offset for grease pencil layers.
This is a proposed fix by @yann-lty
Before:
{F10227973}
After:
{F10227974}
Reviewed By: #grease_pencil, antoniov
Maniphest Tasks: T89952
Differential Revision: https://developer.blender.org/D11962
- Multi-dimensional boolean, int and float vector types are supported.
- A sequence of int's for the "size" is used to declare dimensions.
- Nested sequences are required for default arguments.
Now it's possible to define matrix properties, for e.g:
bpy.props.FloatVectorProperty(size=(4, 4), subtype='MATRIX')
Add array conversion functions that take dimension arguments.
- PyC_AsArray_Multi (version of PyC_AsArray).
- PyC_Tuple_PackArray_Multi_* (version of PyC_Tuple_Pack_*).
When viewing font files in the File Manager, this patch uses the font's
family and style names to show the same type of string shown to users
in operating system lists. For example "Book Antiqua Regular" instead
of "BKANT.ttf"
see D12020 for details and examples.
Differential Revision: https://developer.blender.org/D12020
Reviewed by Campbell Barton and Julian Eisel
WITH_CYCLES_DEBUG was used for rendering BVH debugging passes. But since we
mainly use Embree an OptiX now, this information is no longer important.
WITH_CYCLES_DEBUG_NAN will enable additional checks for NaNs and invalid values
in the kernel, for Cycles developers. Previously these asserts where enabled in
all debug builds, but this is too likely to crash Blender in scenes that render
fine regardless of the NaNs. So this is behind a CMake option now.
Fixes T90240
When using "Clear Asset" from the Asset Browser but with an asset
selected that is not stored in the current file, we can show a more
informative error message.
The viewer node in geometry node trees only supports geometry nodes.
This patch ensures that when ctrl shift clicking on a node, it will only
link to geometry sockets.
Differential Revision: https://developer.blender.org/D12055
This code was actually buggy (forcefully re-enabling excluded layers in some
cases).
Further more, it should not be needed now that layerCollection resync code
reuses as much as possible existing layers instead of deleting and
re-creating them all the time.
Differential Revision: https://developer.blender.org/D12016
The goal of this refactor is to improve resync of LayerCollections
hierarchy to match again Collection one.
Current code would destroy and re-create valid layers whenever a parent
collection would be removed, which leads to losing way too often
layer-related settings when editing collection hierarchies.
While this could be partially addressed from operators side, there was
no way to fix those issues from lower level, more generic ID management
code like ID remapping or library override resync processes.
The new code builds a shallow wrapper around existing (aka old) layers
hierarchy, does a set of checks to define the status of all existing
layers, and try to find the closest matching unused layer in cases where
layers and collections hierarchies do not match anymore.
The intent is to both re-use as much as possible existing layers, and
to pick the 'best' possible layer to re-use, following those heuristics:
* Prefer layers children of current one first (in old hierarchy), and only
use those from other higher-level hierarchies if no (grand-)child is found.
* Prefer to use closest layers available in the old hierarchy.
NOTE: The new code is about 12%-15% slower than the previous one, which is
expected given the increased complexity. Note that this would not be an
issue in practice if this code was not called way too often (needs to
be converted to lazy update instead, which is a long known TODO).
NOTE: The LayerCollectionResync code uses its own built-in version of
FIFO queue, as performances in this code is currently a critical point
(it can get called tens of thousands of times during a single (heavy)
ID management operation currently, in a production file e.g.).
Differential Revision: https://developer.blender.org/D12016
When deleting a node, links attached to that node are deleted, but if one
of those links was connected to a multi input socket, the indices of the
other links connected to it were not updated. This adds updates both in
the case of a normal delete as well as after a delete with reconnect.
Differential Revision: https://developer.blender.org/D11716
Followup to rB3834dc2f7b38 (where getting the proper particle system was
fixed for the Adjust Last Operation panel in the Properties Editor). But
since this operator can also be called from the 3DView, get a current
particle system there as well.
Without this, _all_ particle systems would be copied when executing from
the 3DView (which was never really intended [operator description uses
singular] -- it just happens to use `copy_particle_systems_to_object`
internally as well -- same as the `Copy Active/All to Selected Objects`
operators)).
ref. T83317
Maniphest Tasks: T83317
Differential Revision: https://developer.blender.org/D12033
Caused by {rB8cbff7093d65}.
Since above commit only one modifier would get calculated and the
displaylist boundingbox was calculated wrong.
Maniphest Tasks: T90154
Differential Revision: https://developer.blender.org/D12037
Expand camera effective region to a portion beyond image frame so strokes won't end right at the border.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12049
Recent own rBabf3ce811f6e prevented any LayerCollection update during
the whole liboverride resync process, for both performances and feature
reasons.
However that means that the various runtime caches like the Base GHash
are not cleared anymore during ID remapping process, so we need to call
`BKE_main_collection_sync_remap` instead of `BKE_main_collection_sync`
when we finally are ready for this update.
Reported by @eyecandy (Andy Goralczyk) from Blender studio, thanks!
This patch adds propper tooltips to the effect strips in the "Add" menu.
Note that not all effect strips are actually in the "Effect Strips"
submenu like color strips, text strips or transitions. For these types
of effect strips, a dediacted tooltip is especially useful.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D11714
While transforming a strip, draw the background semi-transparent
if it overlaps with another strip. It's convenient to see what's
underneath, especially with the upcoming Overwrite feature.
Thanks to @iss for the help and review.
Pass `-DLINKSTATIC=ON` to the OSL CMake, to ensure it statically links to
our libpng. Previously this was only applied on Windows, it's now on all
platforms.
Add three functions that trim characters from the front & end of a
`StringRef`. All functions return a new `StringRef` that references a
sub-string of the original `StringRef`.
- `trim(chars_to_remove)`: strips all characters from the start and end
that occur in `chars_to_remove`.
- `trim(char_to_remove)`: same, but with a single character to remove.
- `trim()`: remove leading & trailing whitespace, so same as
`trim(" \r\n\t")`
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D12031
Runs tests based on blend files with minimum python interaction.
Developed as part of GSoC 2021 - Regression Testing of Geometry Nodes.
Earlier, tests were built from scratch by adding a modifier/operation
from the Python API.
Now, tests can also be created inside blender and are compared using
Python script.
Features: Automatically adding expected object if it doesn't exist.
This patch adds tests for the following Geometry Nodes category:
* Curves
* Geometry
* Mesh
* Points
The implemented UML diagram for refactoring of mesh test framework.
{F10225906}
Technical Changes:
SpecMeshTest: It adds the modifier/operation based on the Spec provided.
BlendFileTest: It applies already existing modifier/operation from the blend file.
Test folders hierarchy with tests. This folder should be extracted to `lib\tests\modeling`
{F10240651}
Note: The `geometry_nodes` folder might lie under another `geometry_nodes` folder while extracting, please double check. Use the inner-most one.
The hierarchy should be:
-`lib\tests\modeling\geometry_nodes\mesh`
-`lib\tests\modeling\geometry_nodes\points`
and so on.
* From `ctest` the tests should be run as `ctest -R geo_node -C [Configuration]` on Windows.
* Each single test can be run with its entire name e..g `ctest -R geo_node_geometry_join_geometry`.(just an example). Run `ctest -N -R geo_node` to see all tests.
* From blender, the tests can be run `blender -b path\to\blend\file --python path\to\geo_node_test.py`
Reviewed By: zazizizou, JacquesLucke
Differential Revision: https://developer.blender.org/D11611
Failure to return a list of the expected size & type wasn't
decrementing the value, leaking a reference.
Caused by 127b5423d6 a workaround for the
real error that was fixed f5e020a7a6.
This adds the operator name to the node label which is consistent with the shading nodes.
The vector node has `Vector` as a prefix.
The Attribute nodes already have a different coloured header.
The same label is used when collapsing nodes, this helps readability.
Reviewed By: pablovazquez
Differential Revision: https://developer.blender.org/D10749
Builtbot is switching over from json to yaml. Both
configuration files should be kept in sync for now.
The json file will be removed when everything works as expected.
Ths commit adds a new `IDNameLibMap` to `Main`, used during file reading
to quickly find already read linked IDs.
Without that, search would use string-based search over list of linked
data, which becomes extremely slow and inneficient in cases where a lot
of IDs are linked from a same library. See also {T89194}.
Extrem-usecase reported in T89194 is now about 4 times faster in linked
data reading (about 2 times faster for the whole .blend file loading).
More normal cases (like Sprites studio production files) have barely
measurable speed improvements, a few percents at best.
NOTE: `main_idmap` API was extended to support insertion and removal of
IDs from the mapping, avoids having to re-create the whole thing several
time during libraries expansion in readcode.
Differential Revision: https://developer.blender.org/D11757
Makes it so Render Layers node in the compositor is updated as soon
as Use Denoising is changed for the final render.
Differential Revision: https://developer.blender.org/D12010
This diff somewhat snowballed out of updating OIDN to 1.4.1 it had some
changes that allowed us to remove the arm hacks we had in place and
revert to using identical versions for a whole bunch of deps. But that
required an update to ISPC which needed a newer LLVM and if we're
updating LLVM we may as well update OSL, and when we update OSL, OIIO
may as well be dragged in soo......anyhow...
This diff updates:
LLVM 9.0.0 (11.0.1 for mac/arm) -> 12.0.0
OIIO 2.1.15.0 -> 2.2.15.1
OSL 1.11.10.0 -> 1.11.14.1
winflex_bison 2.5.5-> 2.5.24 (ispc needed newer bison, windows only dep)
OIDN 1.4.0 -> 1.4.1
ISPC v1.14.1(random hash for mac/arm) -> v1.16.0
Flex 2.6.4 (ISPC needed newer Flex than available on CentOS 7)
and removes most of the "special arm/mac" versions. I think just ssl and
embree are left with special versions.
notable changes:
@LazyDodo included some clang headers in the linux/mac harvest which are
needed to start writing custom clang based tooling like D9465 these were
already shipping on windows, but not the other platforms.
[macOS] Change the `LC_ID_DYLIB` of OpenMP for {D11997}. This changes
where the executables look for dylibs.
Reviewed By: sebbas, LazyDodo
Differential Revision: https://developer.blender.org/D11748
This patch fixes occlusion function to handle one specific case (when an edge shares a point with triangle) better,especially when there's overlapping edges in this case.
Previously, this option was not exposed in the UI, only for the clip editor.
There were also multiple rna properties that did the same thing for each of the 2D editors.
There was also an issue where the property enum items were the same as the 3d view which didnt make much sense.
Reviewed By: antoniov
Differential Revision: https://developer.blender.org/D12027
When using a pose slider it is possible to hide bones with the 'H' key.
Before this patch the screen didn't update, so you had to move the mouse 1 pixel to update.
This patch makes it so it updates right away
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D12024
Ref: D12024
Adds full frame implementation to this node operation.
No functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11627
Adds full frame implementation to this node operations.
No functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11749
Adds full frame implementation to this node operations.
No functional changes.
Includes a new operation method `init_data` used to initialize any data
needed after operations are linked and resolutions determined.
Once tiled implementation is removed `initExecution` may be renamed
to `init_rendering` and `init_data` to `init_execution`.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11944
This fixes a performance regression on Ampere cards, on specific scenes like
classroom. For cycles-x there is little difference, but this is still helpful
for LTS releases, and we need to upgrade at some point anyway.
This is an easy & safe, yet not-so-nice way to address the
LayerCollections vs. Collections hierarchy resync problem.
Currently this resync is enforced everytime something changes in the
Collections hierarchy, which is extremely inneficient, and can even
produce 'loss' of LayerCollection data during complex Collection
processes.
Current example is during Library Overrides resync process. New code:
* Makes resync significantly faster (between 10 and 15%).
* Fixes 'disappearing' layer collections settings on sub-collections'
layers.
NOTE: This is not a proper fix for the underlying issue. However,
implementing and testing the 'lazy update' solution as proposed by
{T73411} requires a significant amount of time (especially in testing
and tracking all places where code would need to ensure LayerCollections
are up-to-date), which is not possible currently.
Differential Revision: https://developer.blender.org/D11889
Mantflow only supports wavelet noise, thus the parameter with only one option is no longer useful.
Differential Revision: https://developer.blender.org/D6770
In the draw module, it's not easy to identify what its header is, and
where the shared functions are.
So move `draw_cache_extract_mesh_extractors.c` and
`draw_cache_extract_mesh_private.h` to the same folder as the extractors
and rename these files to make them more identifiable.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11991
Fix hold offset check causing missing snapping point when strip have
only still frames.
Fix effect strips of transformed strips causing snapping to prevoius
strip positions.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11948
Label for snapping current frame to strips was cut off and not very readable.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D11951
Cached OCIO processors were not freed, instead the color spaces were freed twice.
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D12011
Fix for T85517
Bug: Couldn't type space while holding down the shift key in text spaces (e.g. when saving a file, changing the name of object).
Changes: Removing the key combination of Shift + space in `WM_event_is_ime_switch` method.
Reviewed By: harley, mont29
Maniphest Tasks: T85517
Differential Revision: https://developer.blender.org/D10452
Six years ago, Bug T44961 about unwanted spikes had me not do a loop
slide if the angle was too extreme, to avoid unwanted spikes.
The current bug showed that that angle was much too big, and limited
desired behavior in many cases. Changing the angle from 0.25 radians
to 0.0001 radians (about 0.006 degrees) still fixes the original bug
and seems very unlikely to be limiting desired behavior now.
The old modifier code, now just used for Fast, has code in it to
flip faces of arguments when their tranform's negativity differs
from the main object's transform's negativity.
I had neglected to put that logic in when I made the change that
skipped the round trip through BMesh.
Fixing this means that the results are more what the user expects
when some or all operands have negative scales.
This patch addresses the issue raised in T88340.
When entering a pose sliding operator bones would automatically get hidden.
While technically not a bug it was decided that it is too confusing.
Hiding with 'H' is still possible though, just won't happen automatically
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D11883
Ref: D11883
Abbreviations are harder to read and understand thus it is best to be direct.
For example without understanding and context it is hard to know exactly what "Len" means.
This change transitions libmv/osd tests to our
blender_add_test_executable macro that explicitly
takes the include directories as a parameter.
This is in preparation for future clean-up of
global include directories.
Differential Revision: https://developer.blender.org/D12012
Reviewed By: sergey
This improve the cloth modeling workflow by allowing you to weld only the
edges that are used for the sewing forces.
Reviewed By: mano-wii, weasel
Differential Revision: https://developer.blender.org/D10710
**Drawing Changes:**
- F-curve drawing for Stretch, Multiply, Length and Frame Number.
- Value drawing when no keyframes for Stretch, Length and Frame Numbers.
General view of the new drawing for each speed effect mode:
{F9796642, size=full}
Detail of the horizontal zero (blue) line in the new `Multiply` mode:
{F9798520, size=full}
Nice to have (but I don't know how):
- Auto adjusting of endframe when using Multiply or Boost.
Differential Revision: https://developer.blender.org/D6110
Addresses T76003. When using VR with Eevee and viewport denoising,
scene geometry could sometimes be occluded for one eye. Solution is
to use a separate GPUViewport/GPUOffscreen for each VR view instead
of reusing a single one for rendering.
Reviewed By: Julian Eisel, Clément Foucault
Differential Revision: http://developer.blender.org/D11858
The core problem is that the geometry nodes modifier sometimes support
"mapping" (i.e. it remembers which new vertices correspond to edit mode
vertices) and sometimes it does not, depending on what the nodes are doing.
Also see rB07ce9910f7cc.
The solution here is that the fallback case in `BKE_mesh_foreach_mapped_edge`
does not call the callback with "invalid" indices.
Differential Revision: https://developer.blender.org/D12007
This might change the rotation of some instances after a Curve to Points.
Unfortunately, there is not much we can do about that, the math before
was just wrong. The forward and up axis stayed the same though.
Differential Revision: https://developer.blender.org/D12006
The problem was that the modifier was reevaluated all the time, even
between showing the attribute search and clicking on the attribute
name. This freed the data referenced by attribute search. The real bug
here was that the dependency graph was tagged for update even
though nothing changed. This was because the spreadsheet thought
its active context has changed and it wanted to compute the new
value to be shown in the spreadsheet.
The reason for the bug was that I confused how the tree-path of a
node editor works. The second element in the tree path contains
the name of the group node in the root tree that we're in (instead
of the first element).
Differential Revision: https://developer.blender.org/D12009
When the new "need_ids" flag is false and the output type is not
one of the valid BMesh kinds, there is no need to propagate even
a dummy id to all of the faces.
Share functionality for single and multi-threaded edge-split tagging.
Remove logic that ensured vert & loop indices in bm_mesh_edges_sharp_tag
(missing from fd9fc809b7).
Improves control over the XR reference space by using the stage ref
space (user-defined tracking bounds) instead of local ref space
(position at application launch), if available. Also adds an
"absolute tracking" session option to skip applying eye offsets that
are normally added for placing users exactly at landmarks.
By enabling absolute tracking, users can define the tracking origin
in a way that is not linked to the headset position. Instead, the
tracking values given by the XR runtime are left unadjusted and a
user can manually calibrate an "origin" landmark object to adjust to
their real world space.
Can be useful for applications that use external tracking systems
and those that primarily only need to use controllers and not the
headset (e.g. motion capture).
The absolute tracking option requires an update to the VR
Scene Inspection addon to be accessible by regular users.
Reviewed By: Julian Eisel
Differential Revision: http://developer.blender.org/D10946
This was added in 0b7f581397
but seems not to be needed as the assignment was never correct
since only one corner on either side of the smooth edge had the
vertex normal written to it.
Merge the sharp edge tagging into bm_mesh_loops_calc_normals,
this has the advantage that edge tagging can be performed as part of
walking over each vertices edges - instead of tagging in a separate loop.
Even though this will tag edges twice (once for each vertex),
the computation isn't heavy as it's only calculating a dot-product
between the two face users to compare the angle.
This change combined with 4ba06ad0a8
makes BM_loops_calc_normal_vcos around 5.68x faster,
with an overall speedup over 2.6x when transforming a high poly mesh.
(tested on a system with 32 cores).
Reviewed By: mont29
Ref D11970
Supported multi-threading for bm_mesh_loops_calc_normals.
This is done by operating on vertex-loops instead of face-loops.
Single threaded operation still loops over faces since iterating
over vertices adds some overhead in the case of custom-normals
as the order used for accessing loops must be the same as iterating
of a faces loops.
From isolated timing tests of bm_mesh_loops_calc_normals on high
poly models, this gives between 3.5x to 10x speedup,
with larger gains for meshes with custom-normals.
NOTE: this is part one of two patches for multi-threaded auto-smooth,
tagging edges as sharp is still single threaded.
Reviewed By: mont29
Ref D11928
Extract the slider gui implemented for the pose slide tools.
Generalise it so it can be used by other tools as well.
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D9314
Ref: D9314
With this commit, node warnings added to nodes during evaluation
(not "Info" warnings) will also draw in the modifier. In the future
there could be a "search for this node" button as well.
Differential Revision: https://developer.blender.org/D11983
Because these handles are calculated lazily, we need to make sure they
are calculated before switching to a manually positioned mode.
I doubt it would ever be necessary, but theoretically this could happen
on a per-point level, to avoid calculating handles not in the selection.
**Changes:**
- New enums correspond to 4 modes: `Stretch`, `Multiply`, `Frame Number` and `Length`.
- "`Multiply Factor`" has been removed;
- Value corresponding to "`use as speed`" enabled is now the value appended to the `Multiply` enum;
- Value corresponding to "`use as speed`" disabled is now the value appended to the `Frame Number` enum;
- Value corresponding to "`Scale to Length`" enabled is now the value appended to the `Length` enum;
- Except `Stretch` each mode has now its respective control values.
Differential Revision: https://developer.blender.org/D11856
It's the case of Image or Movie Clip node when not selecting any
source or an empty one.
Render methods expect an output buffer with size, only render
operations with resolution.
When exiting editmode, customdata [and thus attributes] are copied from
**BMesh** to **Mesh** (in `BM_mesh_bm_to_me`).
When adding attributes, these were always added via
`CustomData_add_layer_named` only.
Instead (if we are in mesh editmode), we need to go through
`BM_data_layer_add_named` to properly update the **BMesh** (see
`update_data_blocks`) so we have stuff available to copy back to
**Mesh** when exiting editmode.
Same is done for removing (also going through BMesh).
This is now done, DomainInfo is updated to point to BMesh (instead of
Mesh) customdata when in editmode.
Maniphest Tasks: T90026
Differential Revision: https://developer.blender.org/D11998
This node takes a curve and a point selection and allows you to set the
specified (or all) points left/right or both handles to a given type.
Differential Revision: https://developer.blender.org/D11992
* Allow specifying a folder and automatically setting the proper executable
name depending on the operating system
* Use executables from configs for listing devices instead of a blender
command being available
On Windows, using `bpy.data.orphans_purge` with some arguments (eg: `do_recursive=True`) does not produce the expected results. This is due to arguments not being parsed correctly on this platform with the current code.
The proposed fix is based on how other functions with boolean attributes are exposed to the Python API.
Reviewed By: #python_api, mont29
Maniphest Tasks: T89733
Differential Revision: https://developer.blender.org/D11963
This was reported in T90026 for attributes, but was also true for:
- UVMaps
- Vertex Colors
- Sculpt Vertex Colors
- Face Maps
For Vertex groups and Shapekeys this was already done (in that their
remove poll would check if there is a vertex group or shapekey to begin
with), now make this consistent across all mentioned types.
Thx @vvv for the initial patch (where this was done for attributes only)
ref T90026
Reviewed By: HooglyBoogly
Maniphest Tasks: T90026
Differential Revision: https://developer.blender.org/D11990
I'm trying to move away from general files with lots of things in them,
and instead have many small & focused files. I find that easier to
work with since everything has clear responsibilities, even if there is
some minor overhead in managing all these files.
I also try to differentiate more clearly between public and internal
files. So source files and internal headers are in a `intern/`
sub-directory, public functions are in a number of headers one level
higher.
For convenience and to make this compatible with our existing general
headers in `editors/include`, I made the `ED_asset.h` there include all
these public headers.
This is of course a bit of an experiment, let's see how it works in
practice.
Also corrected the name of `ED_asset_can_make_single_from_context()`.
The `ibo.tris` extraction in multithread is currently only done if the
mesh has only 1 material.
Now we cache a map indicating the index of each polygon after sort and
thus allow the extraction of tris with materials in multithreaded.
As caching is a heavy operation and was already being performed in
multi-thread for triangle offsets, no significant improvements are
expected.
The benefit will be much greater when we can skip updating the cache
while transforming a geometry.
**Profiling:**
||master:|PATCH:
|---|---|---|
|large_mesh_editing_materials:|Average: 13.855380 FPS|Average: 15.525684 FPS
||rdata 9ms iter 36ms (frame 71ms)|rdata 9ms iter 29ms (frame 64ms)
|subdiv_mesh_final_only_materials:|Average: 28.113742 FPS|Average: 28.633599 FPS
||rdata 0ms iter 1ms (frame 36ms)|rdata 0ms iter 1ms (frame 35ms)
1.1x overall speedup
Differential Revision: https://developer.blender.org/D11445
This was an open TODO, I wanted to have code for translating asset
library references from and to enum values in a central place, and
access that in the same way from both the Asset Browser and the
Workspace RNA code.
* Adds own file for the related functions.
* Adds doxygen comments.
* Updates RNA callbacks to properly use these functions.
* Let these functions call each other, avoid duplicating logic.
Since recently it's possible to access assets from outside the
File/Asset Browser, via the asset view template. So we are slowly
moving away from file space specific code to dedicated asset system
code. I introduced `AssetLibraryReference` as a duplicate of
`FileSelectAssetLibraryUID`, with a plan to delete the latter in a
separate cleanup commit. That's exactly what this commit is.
This will cause Asset Browsers to open with the default "Current File"
Asset Library. We could avoid that, but it's a minor issue really.
This new variable was introduced with 7898089de3. We don't usually use
an `active` prefix variable. Plus, this makes the name match the one of
the Asset Browser active library variable, so we can use the
`rna_def_asset_library_reference_common()` helper for both.
This will cause Asset Views to open with the default "Current File"
Asset Library. We could avoid that, but it's a minor issue really.
Currently the wording is a bit unclear: it doesn't specify //what// the particles will be converted into. This clarifies it by stating what the particles will be converted into: they will either be converted to a mesh or the instances will be made real.
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D11795
Fix an incoherence between the Eevee Materials menu and the Cycles Materials menu :
Eevee :
{F10230448}
Cycles :
{F10230449}
Simply Fixed by replacing the Cycles UI code by the Eevee UI code.
Thanks to @Brainzman for helping me create this diff and translate
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D11979
Just add a check for whether the mesh has faces when retrieving an
attribute on the corner domain. In the future there could be an info
message in the node in this case, since maybe it's not intuitive.
Would previously pass a few properties that are available via the
asset-handle now. This asset-handle is also required for some of the
asset API, e.g. the temporary ID loading. This will probably be needed
before too long.
For this to work, the utility function needs to be callable without
context, which is only needed for a File Browser specific hack anyway
(doesn't apply to this usage of it).
While the asset-handle design is supposed to be temporary (see
35affaa971), I prefer keeping the fact that it's nothing but a file
entry pointer an implementation detail that is abstracted away. So this
introduces getters for the file data we typically access for
asset-handles.
Note that the current asset-handle design is temporary, see
35affaa971. I still prefer this to be const, as code outside the
asset-list/file-list code should never mess with the file data of an
asset.
The asset handle design is only temporary (see 35affaa971) and this
RNA property is only needed for internal, technical reasons of the asset
view template. So although not nice, at least make it clear in the RNA
property description that this should not be used.
Using const indexes and offsets helps to make the logic less sequential,
which is hopefully easier to understand and possibly easier to parallelize
in the future. Also order return arguments last.
If there were lots of selected objects without an existing rigid body,
we would add rigid bodies to them one by one.
This would be slow in python, now we instead do this as a batch
operation in C.
On my (Intel) MacBook it used to take 60 seconds and with this change it
takes about 0.3 seconds.
Reviewed By: Sebastian Parborg
Differential Revision: http://developer.blender.org/D11957
Remove the assumption of the pose library that Action groups are named
after the bones in the armature. Even though this assumption is correct
when the keys are created by Blender, action groups can be renamed. Keys
created by Python scripts can also use arbitrary group names.
Since there is more code in Blender making this assumption, and looping
over selected bones is also a common occurrence, this commit contains
some generic functionality to aid in this:
- `BKE_armature_find_selected_bones`: function that iterates over all
bones in an armature and calls a callback for each selected one. It
returns a struct with info about the selection states (all or no bones
selected).
- `BKE_armature_find_selected_bone_names(armature)` uses the above
function to return a set of selected bone names.
- `BKE_pose_find_fcurves_with_bones()` calls a callback for each FCurve
in an Action that targets a bone, also passing it the bone name.
Convert `pose_backup.c` (in C) to `pose_backup.cc` (in C++). This will
make future improvements easier. For now, it's the same code with just
some additional explicit casts (C++ doesn't allow implicitly casting
`void *`), `NULL` changed into `nullptr`, and some other simple changes.
No functional changes.
When done from the Properties Editor, the context's modifier should be
used (this is where the button is located), when done from elsewhere,
the active modifier is still the way to go (since the context modifier is
not available then)
Maniphest Tasks: T89982
Differential Revision: https://developer.blender.org/D11972
The node tagged polys normals dirty, but the function to calculate the
normals didn't clear the dirty flags for polys. Now clear the poly and
corner dirty normal flags.
The test forgot to set the new need_ids field, which luckily
exposed a bug in the C api for delaunay when that field is false.
Fixed the bug and the test, and added a test for the need_ids false
case.
Wording on the UI, slider consistency and material mask switches layout.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: http://developer.blender.org/D11839
Also use `const Curve *` instead of `const Object *`, since the
function works at a lower level than objects anyway.
And also remove another unused function. Since this section of code
for converting curves to meshes will likely be replaced, it's nicer to
see which parts actually remain used at this point.
Function signatures for snap callbacks used `const` incorrectly
which was hidden by casting function types.
This made it seem as if the input arguments wouldn't be change and
wouldn't be initialized.
Name return arguments with an `r_` prefix, order them last,
remove function casts and correct `const` usage.
When fixing issues, seeing operation results can be helpful for
detecting which operation went wrong.
This commit adds an option for exporting all operations results to
image files.
Exceptions are:
- Output operations: They are already exported or can be seen in UI.
- Constant operations: There are too many and is rarely useful.
They are exported to "<temp session folder>/COM_operations/"
with filenames "<operation class name>_<operation id>.png".
Only works on full frame execution mode.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11722
Adds full frame implementation to this node operation.
No functional changes.
2.4x faster than tiled fallback.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11677
Adds full frame implementation to this node operations.
No functional changes.
2.3x faster than tiled fallback on average.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11686
Adds full frame implementation to this node operation.
No functional changes.
No performance changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11698
Adds full frame implementation to this node operation.
No functional changes.
No performances changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11750
Adds full frame implementation to this node operation.
No functional changes.
3x times faster than tiled fallback.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11635
Currently we mostly iterate buffer areas using x/y loops or through
utility methods extending from base classes.
To simplify code in simple operations this commit adds wrappers for
specifying buffer areas and their iterators for raw buffers with any
element stride:
- BufferRange: Specifies a range of contiguous buffer elements from a
given element index.
- BufferRangeIterator: Iterates elements in a BufferRange.
- BufferArea: Specifies a rectangle area of elements in a 2D buffer.
- BufferAreaIterator: Iterates elements in a BufferArea.
- BuffersIterator: Simultaneously iterates an area of elements in an
output buffer and any number of input buffers.
- BuffersIteratorBuilder: Helper for building BuffersIterator adding
buffers one by one.
For iterating areas coordinates it adds `XRange` and `YRange` methods
that return `IndexRange`.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11882
This is a necessary step for EEVEE's new arch. This moves more data
to the draw manager. This makes it easier to have the render or draw
engines manage their own data.
This makes more sense and cleans-up what the GPUViewport holds
Also rewrites the Texture pool manager to be in C++.
This also move the DefaultFramebuffer/TextureList and the engine related
data to a new `DRWViewData` struct. This struct manages the per view
(as in stereo view) engine data.
There is a bit of cleanup in the way the draw manager is setup.
We now use a temporary DRWData instead of creating a dummy viewport.
Differential Revision: https://developer.blender.org/D11966
This change the gbuffer layout to use more of the hardware to converting
data back and forth. Normals are encoded as two 16 bits components and
colors as R11G11B10F format.
This was motivated by the need of better quality normals. The issue is
that this increase the GBuffer size consequently. In order to balance
this we chose to merge the refraction and Diffuse/SSS data to use the
same buffer. This means we need to stochastically chose one of these
layers (so noise appear). Given that Glass BSDFs are rarely mixed
with Diffuse BSDFs, we think this is a good tradeoff.
Although currently only the asset list code uses the asset library
reference wrapper, it can stand on its own and may be used in more
places in the future. So I prefer to give it its own source & header
file.
Also removed unused includes, added proper namespaces as per our C++
style guidelines, and removed an unnecessary TODO comment.
No operator or macro should be missing description. But if they do, then
they should use NULL pointer, and not an empty string.
This behavior was already enforced (through an assert) for operators,
previous commit made it the same for macros.
Code dealing with macro operators missing description field was slightly
different than the one from Operator registration.
This lead to invalid memory accesses in some python introspection cases
like the i18n messages extraction code in `bl_i18n_utils` module.
The code used `Spline::LookupResult` in a way that referred to evaluated
points and control points interchangeably. That didn't affect the logic,
but the code became harder to read. Instead, introduce a local struct
to contain the data in a more obvious way.
Some uses of delaunay_2d_calc don't need to know the original verts,
edges, and faces that correspond to output elements.
This change adds a "need_ids" value to the CDT input spec, default true,
which tracks the input ids only when true.
The python api mathutils.geometry.delaunay_2d_cdt gets an optional
final bool argument that is the value of need_ids. If the argument
is not supplied, it is true by default, so this won't break old uses
of the API.
On a sample text test, not tracking ids save about 30% of the runtime.
For most inputs the difference will not be so dramatic: it only really
kicks in if there are a lot of holes.
Regression introduced in {rBbfa3dc91b754}.
`ID_RECALC_GEOMETRY` should tag all operations of the `GEOMETRY`
component and not just the operation of node `GEOMETRY_EVAL_INIT`.
This node implements shortening each spline in the curve based on
either a length from the start of each spline, or a factor of the
total length of each spline, similar to the "Start & End Mapping"
panel of curve properties.
For Bezier curves, the first and last control points are adjusted
to maintain the shape of the curve, but NURB splines are currently
implicitly converted to poly splines.
The node is implemented to avoid copying where possible, so it outputs
a changed version of the input curve rather than a new one.
Differential Revision: https://developer.blender.org/D11901
After rB3b6ee8cee708 by @HooglyBoogly vertex groups were moved
to mesh data, and versioning code was provided to upgrade old
files. However, it fails to consider the case of linked duplicates
having different name lists, and dependent on the object order
can cause some of the names to be lost. This can even be all of
them, if there is a duplicate without any names, which can be
easily created by lazy Python code.
To fix this, change the code to use the longest available name list.
Differential Revision: https://developer.blender.org/D11958
Using part of a patch from Erik Abrahamsson, this replaces the
use of linked lists for original id tracking by Sets.
I had thought that the lists were unlikely to grow to more than
a few elements, but when the mesh has a lot of holes (whose
original ids go *outside* the hole, and therefore, most of the
mesh), this assumption can be very wrong.
On a Text regression test, the time went from 11.67s to 0.16s
with this fix. I also tested to make sure that Boolean didn't
slow down with this, and found it actually had a very slight speedup.
Using Sets exposed a dependency on the ordering of the items
in the id lists, luckily caught by a mesh intersect regression test,
so fixed that.
Scaling down images could create images with a width or height of zero.
Clamp at 1 to prevent a crash, also add an assert to scaling functions.
Ref D11956
`split_multicam` used split operator, where if more strips than
multicam were selected, all would be split, which is undesirable.
Add `Sequence.split()` RNA API function. to split individual strips.
Function accepts `frame` and `split_method arguments`. Returns right
strip after splitting.
In case when strip being split have effects, these will be split too, so
no invalid state should be created.
Selection is not handled, this is by design up to user.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11926
This will help enable development on optimizations to the perimeter
calculation here. Using C++ data structures like Array can make the
code easier to read as well.
Longer term, this can help improve integration with attributes
and possibly the new curve code (since strokes and curves are
quite similar in theory).
Differential Revision: https://developer.blender.org/D11941
We need to be more strict about trying to retrieve a list of vertex group
names from objects now, as only three object types support them.
This commit adds a check for vertex group support in a few places, the
data transfer operator/modifier, copying vertex groups to selected
objects, and the vertex group remove and clear functions.
Differential Revision: https://developer.blender.org/D11947
When a vertex group is used to limit the influence of the modifier
to a subset of vertices, binding data for vertices with zero weight
is not needed. This wastes memory, disk space and CPU cycles.
If the vertex group contents is known to be final and constant,
it is reasonable to optimize by only storing data group vertices.
This has to be an option in case the group can change.
Supporting this requires adding a vertex index field and spliting
the vertex count into mesh and bind variants, but both happen to
fit in available padding. The old numverts field is renamed to the
new bound vertex count field to maintain the array length invariant.
Versioning is used to initialize the other new fields.
If a file with sparse binding is opened in an old blender version,
it is corrupted into a non-sparse bind with vertex count mismatch,
preventing the modifier from working until rebind.
Differential Revision: https://developer.blender.org/D11924
`POINT_CACHE_RESET` pointed to `GEOMETRY_EVAL_INIT` while
`GEOMETRY_EVAL_INIT` pointed to `POINT_CACHE_RESET`.
Now `POINT_CACHE_RESET` points to the same nodes pointed to by
`GEOMETRY_EVAL_INIT` thus avoiding the dependency cycle.
The crash happens because `GPU_offscreen_create` is called with `err_out` `NULL`.
This patch proposes a solution within the `GPU_offscreen_create` itself
and raises an error report in the interface if a menu is called with
dimensions beyond what is supported.
Ref T89782
Maniphest Tasks: T89782
Differential Revision: https://developer.blender.org/D11927
The `action_preview_render()` function used to just render, but now it
also temporarily applies the pose. Its comment is now updated for this.
No functional changes.
The functions need to be declared before main as prototypes.
The appended libs will use the resources (textures, UBOs) defined at
global scope.
This removes a bit of code duplication and some long macros.
Instead of appending using `BLENDER_REQUIRE`, shaders can now ask for
libs to be added after the shader's `main()` by using the
`BLENDER_REQUIRE_POST` pragma.
Use viewspace instead of world space to compute pixel projection.
This fix issues when camera is far from origin and float precision would
produce artifacts.
This port the facing "flat" normal trick used by the gpencil engine
to EEVEE as well as the thickness mode.
The objects parameters are passed via the objectInfos UBO to avoid
much boiler plate code. However if this UBO grows too much we might have
to split it.
The normal trick for planar surfaces is quite simple to port to the
vertex shader even if it is less efficient.
However to compute it we need the objects bounds. This is passed as a
scale only through the orco factors. This will needs a bit of cleaning
at some points, with boundbox computed at object level.
Nothing much different compared to the previous implementation.
The transparent BSDF and principled BSDF now detects when the material
is potentially transparent to select the best way to render it.
This makes is possible to have AA and correct blending of the
forward rendered spheres.
However, to avoid distorded spheres we need to not support Lookdev
in panoramic projection mode.
Also remove support for LookDev when using render border for now.
This differs a bit from old implementation.
- Instead of manually adjusting the viewport we correctly place the
sphere in the vertex shader.
- Rendering happens after TAA accumulation: This is because we now
support panoramic cameras and TAA would distort the spheres.
This expose the capability of having no light and no probe (except the
world one) for specific views / code path.
The caller just need to pass 0 as extent to the `set_view()` function.
This is usefull for lookdev.
This does not include reference spheres rendering.
The approach is a bit different than before.
Now we use a `bNodeTree` to control the rendering of lookdev. This
generates a `GPUMaterial` that is stored per `Instance`. This way
rendering lookdev is just updating the temp light cache using this
material as world material. Removing the use of custom shader.
This introduces a small hack in order to bind the studiolight hdri after
the nodetree glsl parsing.
The background display however is still using a custom shader in order
to sample the world cubemap with different roughness.
The view space option of the studiolight is now faster by using a
transform before shading instead of rebaking the lightprobe constantly.
This should not have any particular impact on render time.
When evaluating surfaces, the deferred passes needs to sample the
depth buffer. But it also test against the stancil buffer.
Moreover the sampler needs to be a 2D sampler which is not the case
for cubemaps and texture2Darrays.
To overcome this we simply copy the gbuffer depth to another
temp texture using framebuffer blitting.
Some things differs from old implementation.
- Object visibility is filtered correctly without using a visibility
callback (which is to be removed).
The implementation is also more high level using less low level tricks.
A dedicated LightProbeView is created for each lightprobe cubeface to
render using all pipeline (deferred and forward).
There is still a few things not working.
Only world probe is supported for now.
The new implementation diverge from the original by randomly
selecting one lightprobe instead of sampling them all.
This speeds-up rendering a bit.
This is a small convenience. This let the render engine use this
default world if scene has no world.
World is black to keep the same behavior as before.
Shading groups are now created by the material_array_get functions
instead of passing a reference to be filled later. This avoids having
to wait later to maybe create a sub shading group.
This also simplifies different geomety type handling.
This adds a new closure selection method.
- In a first pass, weights are accumulated per output type (diffuse,
reflection, refraction).
- A random threshold is then generated before evaluating the BSDF nodes
again.
- During the evaluation pass the random threshold is decremented until
it reaches 0. At this moment the current BSDF is sampled.
For this to work, I splited the evaluation and the weighting in two
functions for all BSDF. The `*_eval` nodes are generated as dangling
nodes from the graph and only serialized after the rest of the graph.
Recalc flag on Material ID being unavailable to render engine, this
adds a simple way to detect material update by detecting shader creation
or update.
This constructs a "mirror" nodetree that feeds the closure "shader"
nodes with their respective final weight.
The tree is mirrored using simple math nodes. This is quite messy but
this is the only way to proceed without introducing special nodes.
The other issue with this method is that inputs are all uniforms even
for unplugged socket on temporary math nodes with add bloat to the
shader uniform buffer structure.
Only the part relevant to the weighting is duplicated. Other connexions
with the shading tree are reuse.
All shader nodes are updated to receive a `Weight` hidden parameter.
The original shader mixing tree is preserve to let the choice of using
either way to weight the output.
For now this is only done for the output nodes. This will need to be
extended to Closure to RGBA sub-tree.
This is the first step towards the new evaluation scheme of EEVEE
closures.
This commit contains:
- Removal of GPU_SOURCE_BUILTIN type, prefering global instead. This
avoid many boilerplate code since most of the old builtins are now
datas that are always present (i.e: view matrices, normals).
- Rewritting of codegen in C++ to use `std::stringstream`.
- Added a callback to let engine decide what to do with codegen code.
This remove a lot of needs for defines because of code order
dependency. The engine can insert the nodetree code in custom ways
to create advance effects (i.e: add displacement or vertex lighting).
Engine now returns final shader strings.
- Closure nodes evaluation replacment is a placeholder for now.
This is a port of the old material grouping. This is a bit more
clean as we use containers for each passes and other structures.
Nodetree is generated without major error for simple materials but
it is not yet used as closures are not outputed.
This adds the transparency and volume handling in the deferred
render pipeline.
Implementation is still unfinished.
To have better naming convention, I renamed object shader to surface.
This introduce a fat Gbuffer layout that groups closure data in groups
of similar BSDF. The goal is to have at least one sample for each
group to avoid too much code complexity and expected worse performance.
There is a lot of room for buffer reuse to reduce memory usage but it is
not considered a priority for now.
Add a smooth transition to avoid flickering of stochastic effects such
as soft shadows.
This use a simple blend method to progressively reveal the render
after some low sample count to avoid most of the flickering.
Parameters are hardcoded for now.
We use a new RNG to avoid correlation artifacts between Anti-Aliasing
and Shadow samples (see T68594).
The new sequence is a leap halton sequence. This makes it good with
low number of samples and yield less correlation issues.
Another change is that we directly jitter the projection matrix instead
of rotating the view matrix. This is improving convergence time and
avoid passing a second matrix to the shader.
However this case lead to discontinuity artifacts at face boders.
We might want to revert to the old rotation method for this
reason even if convergence is slower.
Now the shadows are linked to a `Light` object. The `Light` object is
linked to an `ObjectKey` to ensure persistence and deletion tracking.
The Uniform data are packed so that there is 1 `ShadowPunctualData`
per light in a `LightBatch`. This means there is only a shadowmap
limit to the number of `Shadow` in a scene.
Difference with previous implementation:
- Better texture space usage of cone and area light shadow.
- Shadows are packed in an atlas. Reducing requirements for future
features.
- Sampling is simpler because shadow matrix does everything.
This follows closely the implementation of 2.5D tiled light
culling described in the presentation:
"Improved Culling for Tiled and Clustered Rendering"
from Michal Drobot
http://advances.realtimerendering.com/s2017/2017_Sig_Improved_Culling_final.pdf
I chose the tile + Z binning approach for its high depth range support
and low CPU overhead & low memory consumption compared to the cluster
based culling. The cons is that the culling is a bit less precise in
some aspect but it is quite balanced.
The culling is done by the `Culling` object which is templated to easily
be reused for light probes cullg.
The Z-binning process is described starting from slide 20 in the
reference pdf.
I also implemented a debug pass to visualize false negative (light
culled when they shouldn't) and light evaluation density.
This is useful to detect failure case and hotspot. This could be exposed
as a developper only render pass in the future.
Some optimization of the reference implementation requires extensions
not yet added to GPU module and will be added later.
This has the basis of clustered light culling but does not yet do
it. The lights are only culled by frustum.
Its the same as if there was only one Cell for the entire Viewport.
This also wrap GPUFrameBuffer & GPUTexture inside eevee:Framebuffer
and eevee:Texture to improve managment.
Another cleanup was to put all members of `Instance` public to
avoid much complexity in accessing the data with modules
dependencies.
Also split velocity View related data to `class Velocity` and
rename previous `Velocity` to `VelocityModule`
Support infinite light count by dividing rendering into chucks of
LIGHT_MAX. Forward passes are just rendered again and deferred passes
(not implemented yet) will just have to have multiple light evaluation
passes.
This is almost the same thing as old implementation.
Differences:
- We clamp the motion vectors to their maximum when sampling the velocity buffer.
- Velocity rendering (and data manager) is separated from motion blur. This allows
outputing the motion vector render pass and in the future use motion vectors to
reproject older frames.
- Vector render pass support (only if motion blur is disabled, just like cycles).
- Velocity tiles are computed in one pass (simpler code, less CPU overhead, less
VRAM usage, maybe a bit slower but imperceivable (< 0.3ms)).
- Two velocity passes are outputed, one for motion blur fx (applied per shading view)
and one for the vector pass. This could be optimized further in the future.
- No current support for deformation & hair (to come).
Bonus addition, support for shutter curve.
Compared to the old implementation, the per time step sync function
is lighter and localized. Also it does not require a full engine
"reboot" in order to work.
Also modifies camera setup to be compatible with future camera motion
blur.
Bonus addition, support for shutter curve.
Compared to the old implementation, the per time step sync function
is lighter and localized. Also it does not require a full engine
"reboot" in order to work.
Pretty much identical to the previous implementation. With the exception
of a temporary noise function and some simplification of the CoC
computation. This also fixes issues with the Ortho depth of field.
Most of the files were modified to comply to new shader codestyle.
This also adds partial support of panoramic cameras (bokeh and
anamorphic is still buggy).
This cleansup a lot of confusion / complexity in the setup code.
Setup is closer to what cycles does now.
Also duplicates some buggy behavior of Cycles for now until this
is fixed.
This move view resolution handling to the `Camera` class that will
in the future clip and trim each view in panoramic projection.
There is a new `CameraView` that contains the `DRWView` and subview.
This way each `ShadingView` is associated to a unique `CameraView`.
ShadingView` & `CameraView` are all allocated & defined at creation time
but only the one activated by `Camera` will be rendered.
This option will make accumulation happen in a pre exposed logarithm
color space. This reduces the importance of bright pixels in the pixel
filter which will result in less aliasing in theses areas.
There is a few cases where one might want to disable this option to
match cycles better.
Render mode is really close to what the viewport render does.
Film output is done by resolving the data to the next (double buffered)
framebuffer and read back.
This also includes a bit of cleaning about naming of init() and sync()
functions.
This commit adds the Film class that handles accumulation of color and
non-color data using arbitrary projection and filter size.
A weighted accumulation (sum) is done into a data buffer with an
additional weight buffer. The sum being per pixel, it allows the input
textures that are not aligned with the output pixel grid.
Panoramic projection works by rendering a cubemap (6 views) of the scene
at the camera position. The Film filter pass then gather the pixels
using the correct Panoramic projection ensuring correct Anti-Aliasing.
For Non-color data (depth, normals) we only keep the closest value to
the target pixel center (simulating a filter size of 0).
Color data is accumulated in a log space to improve AntiAliasing output.
This is hardcoded for now.
Larger filters have poor performance but are very fast to converge.
Code Wise: This commit rename some modules to avoid possible confusion
and have better meaning. Use namespace instead of prefixes.
Added a new eevee_shared.hh file to share structure and enum definitions
between GLSL and C++.
Same idea as previous commit. This cleans-up the interface and put all
viewport related data inside the `DRWData` struct.
The draw manager is responsible for freeing it. That is the main point
of this all. In the future, we can have custom freeing method for each
engine.
This also move the DefaultFramebuffer/TextureList and the engine related
data to a new `DRWViewData` struct. This struct manages the per view
(as in stereo view) engine data.
There is a bit of cleanup in the way the draw manager is setup.
We now use a temporary DRWData instead of creating a dummy viewport.
message(FATAL_ERROR"32 bit compiler detected, blender no longer provides pre-build libraries for 32 bit windows, please set the LIBDIR cmake variable to your own library folder")
Itwillsoonbeusedby the ../utils/make_update.pyscript.
The file allows to set branches or specific commits for both git submodules and svn artifacts. Can also define various build package versions for use by build workers. Especially useful in experimental and release branches.
setBUILD_CMAKE_ARGS=%BUILD_CMAKE_ARGS% -G "Visual Studio %BUILD_VS_VER%%BUILD_VS_YEAR%%BUILD_GENERATOR_POST%"%BUILD_PLATFORM_SELECT%%TESTS_CMAKE_ARGS%%CLANG_CMAKE_ARGS%%ASAN_CMAKE_ARGS%%PYDEBUG_CMAKE_ARGS%
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
