The cell size is chosen as r/sqrt(3) (i.e. max. 1 sample per cell),
which means that the influence of each cell extends beyond the 1st
neighbor. a 5x5x5 box (except the center and corners) needs to be
examined to find collisions.
This is still buggy (uneven sample coverage) and needs changes to the
sampling system for better threading support.
The implementation is based on
Bowers, John, et al. "Parallel Poisson disk sampling with spectrum analysis on surfaces." ACM Transactions on Graphics (TOG). Vol. 29. No. 6. ACM, 2010.
This should test general functionality and consistency of different methods
for generating samples. In particular it shoud ensure that threaded variants
produce the same samples as unthreaded variants when using the same generator
and seeds.
This is to ensure that threaded generator usage creates the exact same results
as the non-threaded base version. Further improvements and testing will be
needed.
Samples can be generated either one-by-one using the existing "make_sample"
function (which uses a default context), or use the more efficient batch
generation functions. These optionally support threading via the task scheduler
now.
It's purpose is to limit the amount of light that spread across the screen.
Not entierly sure if it's very usefull, but it sure help to avoid to drown the screen in bloom.
This function was called to recreate the lower mip level of the probe texture. But this is not it's usage and it introduced a stall.
This patch add cubemap mipmap level regeneration in eevee_effects.c
Since we started supporting the (Cycles) Material Output old files
stopped working. There is no reason to keep the original Eevee material
otuput anymore.
It includes doversion for old files.
Move floats around when needed to accomodate vec3 arrays efficiently.
With this we use slightly less memory when possible. Basically vec3s are not
treated as vec4 unless we have no float to use for padding).
Reviewers: fclem, sergey
Differential Revision: https://developer.blender.org/D2800
This includes big improvement:
- The horizon search is decoupled from the BSDF evaluation. This means using multiple BSDF nodes have a much lower impact when enbaling AO.
- The horizon search is optimized by splitting the search into 4 corners searching similar directions to help which GPU cache coherence.
- The AO options are now uniforms and do not trigger shader recompilation (aka. freeze UI).
- Include a quality slider similar to the SSR one.
- Add a switch for disabling bounce light approximation.
- Fix problem with Bent Normals when occlusion get very dark.
- Add a denoise option to that takes the neighbors pixel values via glsl derivatives. This reduces noise but exhibit 2x2 blocky artifacts.
The downside : Separating the horizon search uses more memory (~3MB for each samples on HD viewport). We could lower the bit depth to 4bit per horizon but it produce noticeable banding (might be fixed with some dithering).
Diffuse was not outputing the right normal. (this is not a problem with SSR actually)
Glass did not have proper ssr_id and was receiving environment lighting twice.
Also it did not have proper fresnel on lamps.
This fixes the Principled shader in Eevee, among other nodes.
Basically before we were treating all the vec3 as vec4 as far as memory
goes. We now only do it when required (aka, when the vec3 is not
followed by a float).
We can be even smarter about that and move the floats around to provide
padding for the vec3s. However this is for a separate patch.
That said, there seems to be some strong consensus in corners of the
internet against using vec3 at all [1]. Basically even if we get all the
padding correct, we may still suffer from poor driver implementations in
some consumer graphic cards.
It's not hard to move to vec4, but I think we can avoid doing it as much
as possible. By the time 2.8 is out hopefully most drivers will be
implementing things correctly.
[1] - https://stackoverflow.com/questions/38172696
Deleting the old internal audaspace.
Major changes from there are:
- The whole library was refactored to use C++11.
- Many stability and performance improvements.
- Major Python API refactor:
- Most requested: Play self generated sounds using numpy arrays.
- For games: Sound list, random sounds and dynamic music.
- Writing sounds to files.
- Sequencing API.
- Opening sound devices, eg. Jack.
- Ability to choose different OpenAL devices in the user settings.
Use mesh batch cache for mesh selection.
Note that we could create the batches and free immediately
so they don't take up memory.
This resolves a problem where selection was limited
to immediate-mode buffer size.
Since the paste object is pasted in the active collection, and not on
its original one, we need to flush/calculate the new collection base
settings (visibility, selectability, ...).
DEG_id_tag_update() for the scene now. Though it may be better to tag
only the object specific IDs in the future.
Caused by own recent changes in handling of verts/edges/etc. arrays storage
for raycasting (rBe324172d9ca6690e8).
Issue was actually even weirder - there is absolutely no reason at all to
release DM here, those finaldm are stored in Object or EditMesh structs and
handled by general update system, other code shall never try to release them!
Originally we were not respecting the original visibility flags of the
collections. However this is required for Copy-on-write (CoW).
Remember to update the svn lib tests folder. I had to update some of the
json files there.
Also adding a new unittest for this particular issue:
Test render_layer_scene_copy_f
Flag ownership for each index array & vbo's
so we don't have to manually keep track of this and use the right free call.
Instead this can be passed on creation.
See D2676
2.8x branch added bContext arg in many places,
pass eval-context instead since its not simple to reason about what
what nested functions do when they can access and change almost anything.
Also use const to prevent unexpected modifications.
This fixes crash loading files with shadows,
since off-screen buffers use a NULL context for rendering.
I couldn't reproduce either, but calling min() with different argument
data types and indexing vectors with an index not known at compile time
seem likely to cause problems.
Ref T52404, T52404.
We stop using the .zip file and just have all files now in
lib/darwin/python/lib, along with numpy, numpy headers and requests.
This makes it consistent with Linux and simplifies code.
For old libraries the .zip stays, code for that gets removed when we
fully switch to new libraries.
We now have to support more complex copying types, which are controlled
by flags, so all copying logic will need to take those at some point (at
least, all potentially dealing with IDs).
_copy_data() functions shall not do that at all anymore. Kept as option
for now even though that helper is only called from here...
Also moar varnames renaming to standard _src/_dst sufixes.
We do have an history of those pieces of evil in our code, would be nice
to get fully rid of it, but at the very least let's not add more of them
in new code. :)
This can happen with Alembic files exported from Maya. I'm unsure as to the
root cause, but at least this fixes the crash itself.
Thanks to @looch for reporting this with a test file. The test file has to
remain confidential, though, so it's on my workstation only.
FFMPEG & VPX don't handle target with --build parameter, so we need to make sure use of plain configure command
Reviewed by: Brecht Van Lommel
Differential Revision: http://developer.blender.org/D2791
Was complicating general use case, also support for transforming with matrix_space set.
Add matrix_space support for manipulator_window_project_2d too.
This patch adds "Pixel Size" to the performance options, which allows to render
in a smaller resolution, which is especially useful for displays with high DPI.
Reviewers: Severin, dingto, sergey, brecht
Reviewed By: brecht
Subscribers: Severin, venomgfx, eyecandy, brecht
Differential Revision: https://developer.blender.org/D1619
The only reason shutter time was marked as non-animatable is because Blender
Internal render does not support such animation. But this is something what
users are keeping asking for and now Blender Internal is on it's way out.
Enabled animation of this property, but noted in tooltip that Blender Internal
does not support animation of this property.
Bug in new ID copying code, thanks once again to stupid nodetrees, we
ended up wrongly remapping MA node->id pointers to NodeTree when copying
materials using node trees...
Basically, make re-alloc and memcpy from the same lock, otherwise one
thread might be re-allocating thread while another one is trying to
copy data there.
Reported by Mohamed Sakr in IRC, thanks!
Enabled cache for frame accessor and tweaked policy so we guarantee keyframed
images to be always in the cache. The logic might fail in some real corner case
(for example, when doing multiple tracks at once on a system where we can not
fit 2 clip frames in cache) but things are much better now for regular use.
This fix a bug when occluder are on the edge of the screen and occludes more than they should.
Grouped the texture fetches together and clamp the ray at the border of the screen.
Also add a few util functions.
This should fixes the error message that a stall occured because of busy mipmap.
This happened on the minmax buffer generation and introduced a random 0.2ms latency.
I'm not sure of what was happening though.
Creating ngons with multiple axis aligned shapes in the middle of a
single face would fail in some cases.
This exposed multiple problems in BM_face_split_edgenet_connect_islands
- Islands needed to be sorted on Y axis when X was aligned.
- Checking edge intersections needed increased endpoint bias.
- BVH epsilon needed to be increased.
Note: this commit seems to work as expected (also with transform
snapping etc.). However, it is rather unsafe - not enough for 2.79 at
least, unless we get much more testing on it. It also depends on three
previous ones.
Note that using a global lock here is far from ideal, we should rather
have a lock per DM, but that will do for now, whole DM thing is doomed
to oblivion anyway in 2.8.
Also, we may need a `DM_DIRTY_LOOPTRIS` dirty flag at some point. Looks
like we can survive without it for now though... Probably because cached
looptris are never copied accross DM's?
This was... horribly wrong, CDDM will often *not* need to allocate
anything to return arrays of mesh items! Just check whether array
pointer is NULL.
Also, remove `DM_get_looptri_array`, that one is useless currently,
`dm->getLoopTriArray` will always return cached array (computing it if
needed).
The tweakmode flag and the selected-channels flag accidentally
used the same value, due to confusion over where these flags were
supposed to be set. The selected-channels flag has now been moved
to use a different value, so that there shouldn't be any further
conflicts.
To be ported to 2.79.
Old bevel 'Clamp overlap' code was very naive: just limit amount
to half edge length. This uses more accurate (but not perfect)
calculations for the max amount before (many) geometry collisions
happen. This is not a backward compatible change - meshes that
have modifiers with 'Clamp overlap' will likely have larger allowed
bevel widths now. But that can be fixed by turning off clamp overlap
and setting the amount to the desired value.
Own previous fix (rBd5d626df236b) was not valid, curves are actually
supported by SoftBodies. It was rather a mere UI bug, which was not
including Surfaces and Font obect types in those valid for softbody UI.
Thanks to @brecht for the head up!
Also, fix safe for 2.79, btw.
* 255 maximum seems excessive for F-Curve handle vertices; now reduced to 100
* Vertex Size is no longer restricted to the old 10px maximum size limit
(used because Windows limited the maximum vertex size drivers needed to
support)
It's more important that there is some form of feedback that the strips
are muted (i.e. dotted borders) than the fact that those dotted borders
may have slightly rounded corners. So, just use a regular sharp-cornered
rect when the strips need to be muted.
There's no reason to manually iterate over items in a DLRBT_Tree,
as the structure is designed to be able to be safely casted down
to a ListBase and ListBase-like nodes..
Adding structs was checking for duplicates
causing approx 75k string comparisons on startup.
While overall speedup is minimal,
Python access to `bpy.types` will now use a hash lookup
instead of a full linked list search.
See D2774
This creates a dependency of the hair groups on the validity of the pattern,
so care has to be taken to always update the groups when the pattern changes.
Changes for 2.8x to use EvaluationContext caused some confusion
- Would use scene layer passed from snap context.
- Would generate duplis from Main eval context.
- Would take context argument and use it to create another eval context.
Adding context args all over and filling in a new eval-context
for every ray-cast test isn't ideal either.
Remove the context argument since the purpose of
SnapObjectContext is to avoid this kind of confusion.
Store the EvaluationContext once and re-use.
This effectivly reduce firefly bleeding all over the place.
We still need the clamp in the resolve pass because the level 0 has not been clamped.
NOTE: I did not clamped each sample individually for performance BUT I did not profile it to know how much it cost.
This was surely cause by float overflow. Limit roughness in this case to limit the brdf intensity.
Also compute VH faster.
Add a sanitizer to the SSR pass for investigating where NANs come from. Play with the roughness until you see where the black pixel is / comes from.
It doesn't seem that useful in practice, was mostly added to match some
other renderers but also seems to be causing user confusing and accidental
long render times. So let's just keep the UI simple and remove this.
Differential Revision: https://developer.blender.org/D2768
We're adding some bias by default, which now I think is the right thing
to do from a usability point of view since you really need to use those
options anyway to get clean renders in a practical time.
Differential Revision: https://developer.blender.org/D2769
Adds thin/default/thick modes to add -1/0/1 to the auto detected line width,
while leaving the overall UI scale unchanged.
Also tweaks the default line width threshold, so thicker lines start from
slightly high UI scales.
Differential Revision: https://developer.blender.org/D2778
Group texture fetches to hide latency. 3.2ms -> 2.2ms (constant time improvement, not depending on scene complexity)
Could optimize further with textureGather (require OpenGL 4.0).
Theses Materials are rendered after the SSR pass.
The only difference with previous method is that they have a depth prepass (less overdraw) and are not sorted.
For the moment the only way to enable this is to:
- enable Screen Space REFLECTIONS.
- enable Screen Space Refraction in the SSR parameters.
- enable Screen Space Refraction in the material tab.
We track the previous ray position offseted by the thickness. If the sampled depth is between this value and the current ray position then we have a hit.
This fixes rays that are almost colinear with the view vector. Thickness is now only important for rays that are comming back to the camera.
As a consequence, this simplify a lot of things.
Also include some refactor.
Since we are working with non power of 2 textures, the mipmap level UV does not line up perfectly.
This resulted in skewed filtering and bad sampling of the min/max depth buffer.
We generate a 3D lut to precompute the btdf intensity.
I decided to use a 64*64*16 (N dot V, ior, roughness) because the btdf varies less with roughness than with IOR.
We also remap the ior to better use the space in the LUT.
*Changed categories of some keywords
*reordered some longer keywords that didn't appear
*Activated another color (reserved builtins) by Leonid
*added some HGPOV and UberPOV missing keywords
Patch by Maurice Raybaud (@mauriceraybaud). Thanks to Leonid for additions, feedback and Linux testing.
Related diffs: D2754 and D2755.
While not a regression, this is new feature and would be nice to have it
backported to final 2.79.
Bug introduced in recent ID copying refactor.
This commit basically sanitizes seq strip copying behavior, by making
destination scene pointer mandatory (and source one a const one).
Nothing then prevents you from using same pointer as source and
destination!
This is a bit confusing, especially when one mixes OpenCL code where ulong equals
to uint64_t with CPU side code where ulong is expected to be something else from
the naming.
This commit makes it so we use explicit name, common on all platforms.
When a mesh changes its number of vertices during the animation,
Blender rebuilds the DerivedMesh, after which the materials weren't
applied any more (causing the default to the first material slot).
Commit b6d7cdd3ce changed how the mesh data
is deformed, which wasn't taken into account yet in this unit test.
Instead of directly reading the mesh vertices (which aren't animated any
more), we convert the modified mesh to a new one, and inspect those
vertices instead.
Problem was that some code checks to see if device_pointer is null or
not and the new allocator wasn't even setting the pointer to anything
as it tracks memory location separately. Setting the pointer to non
null keeps all users of device_pointer happy.
Also internal changes so arrow3d matches grab3d's behavior.
Needed to add WM_MANIPULATOR_DRAW_OFFSET_SCALE flag so
we can optionally apply offset in worldspace or screen scaled values.
This could make output really polluted, where it'll be hard to see actual
issues.
It is still possible to have all backtraces printed using BLENDER_VERBOSE
environment variable.
As part of the fix for T51587, I removed the Depth output for non-Multilayer
images since it seemed weird that PNGs etc. that don't have a Z pass still get
a socket for it.
However, I forgot about non-multilayer EXRs, which are a special case that can
actually have a Z pass.
Therefore, this commit brings back the Depth output for non-multilayer images
just like it was in 2.78.
- Apparently MSVC does not support compound literals
in C++ (at least by the looks of it).
- Not sure how opencl_device_assert was managing to
set protected property of the Device class.
We don't enable global SSE optimizations in regular kernel, and we
keep those disabled on Linux 32bit.
One possible workaround would be to pass arguments by ccl_ref, but
that is quite a few of code which better be done accurately.
Steps to reproduce:
- Create shader Image texture -> Diffuse BSDF -> Output. Do NOT select image yet!
- Start viewport render.
- Select image from the ID browser of Image Texture node.
Thing is: with the memory manager we always need to inform device that memory
was freed.
Common folks, nobody considered master a C++11 only branch. Such decision is to
be done officially and will involve changes in quite a few infrastructure related
areas.
New code was handling correctly ID's internal references to self, but
not references between 'made real' different objects...
Regression, to be backported in 2.79.
It is defined to & for CPU side compilation, and defined to an empty for any GPU
platform. The idea here is to use this macro instead of #ifdef block with bunch
of duplicated lines just to make it so CPU code is efficient.
Eventually we might switch to references on CUDA as well, but that would require
some intensive testing.
The documentation for the bpy.app.handlers.scene_update_{pre,post}
handlers states that they're called "on updating the scenes data".
However, they're called even when the data hasn't changed. Of course
such handlers are useful, but the documentation should reflect the
current behaviour.
Reviewers: mont29, sergey
Subscribers: Blendify
Maniphest Tasks: T46329
Differential Revision: https://developer.blender.org/D1535
Image textures were being packed into a single buffer for OpenCL, which
limited the amount of memory available for images to the size of one
buffer (usually 4gb on AMD hardware). By packing textures into multiple
buffers that limit is removed, while simultaneously reducing the number
of buffers that need to be passed to each kernel.
Benchmarks were within 2%.
Fixes T51554.
Differential Revision: https://developer.blender.org/D2745
Simply disabled python tests, they can't be run anyway (since blender target is
not enabled) and we don't have any player-related tests in that folder.
This will allow much finer controll over how we copy data-blocks, from
full copy in Main database, to "lighter" ones (out of Main, inside an
already allocated datablock, etc.).
This commit also transfers a llot of what was previously handled by
per-ID-type custom code to generic ID handling code in BKE_library.
Hopefully will avoid in future inconsistencies and missing bits we had
all over the codebase in the past.
It also adds missing copying handling for a few types, most notably
Scene (which where using a fully customized handling previously).
Note that the type of allocation used during copying (regular in Main,
allocated but outside of Main, or not allocated by ID handling code at
all) is stored in ID's, which allows to handle them correctly when
freeing. This needs to be taken care of with caution when doing 'weird'
unusual things with ID copying and/or allocation!
As a final note, while rather noisy, this commit will hopefully not
break too much existing branches, old 'API' has been kept for the main
part, as a wrapper around new code. Cleaning it up will happen later.
Design task : T51804
Phab Diff: D2714
Note these are intended for platform maintainers, we do not intend to
support users making their own builds with these. For that precompiled
libraries from lib/ should be used.
Implemented by Martijn Berger, Ray Molenkamp and Brecht Van Lommel.
Differential Revision: https://developer.blender.org/D2753
Since all the shadow catchers are already assumed to be in the footage,
the shadows they cast on each other are already in the footage too. So
don't just let shadow catchers skip self, but all shadow catchers.
Another justification is that it should not matter if the shadow catcher
is modeled as one object or multiple separate objects, the resulting
render should be the same.
Differential Revision: https://developer.blender.org/D2763
Note these are intended for platform maintainers, we do not intend to
support users making their own builds with these. For that precompiled
libraries from lib/ should be used.
Implemented by Martijn Berger, Ray Molenkamp and Brecht Van Lommel.
Differential Revision: https://developer.blender.org/D2753
Since all the shadow catchers are already assumed to be in the footage,
the shadows they cast on each other are already in the footage too. So
don't just let shadow catchers skip self, but all shadow catchers.
Another justification is that it should not matter if the shadow catcher
is modeled as one object or multiple separate objects, the resulting
render should be the same.
Differential Revision: https://developer.blender.org/D2763
This will allow much finer controll over how we copy data-blocks, from
full copy in Main database, to "lighter" ones (out of Main, inside an
already allocated datablock, etc.).
This commit also transfers a llot of what was previously handled by
per-ID-type custom code to generic ID handling code in BKE_library.
Hopefully will avoid in future inconsistencies and missing bits we had
all over the codebase in the past.
It also adds missing copying handling for a few types, most notably
Scene (which where using a fully customized handling previously).
Note that the type of allocation used during copying (regular in Main,
allocated but outside of Main, or not allocated by ID handling code at
all) is stored in ID's, which allows to handle them correctly when
freeing. This needs to be taken care of with caution when doing 'weird'
unusual things with ID copying and/or allocation!
As a final note, while rather noisy, this commit will hopefully not
break too much existing branches, old 'API' has been kept for the main
part, as a wrapper around new code. Cleaning it up will happen later.
Design task : T51804
Phab Diff: D2714
Shows new, reference and diff renders, with mouse hover to flip between
new and ref for easy comparison. This generates a report.html in
build_dir/tests/cycles, stored along with the new and diff images.
Differential Revision: https://developer.blender.org/D2770
* Remove some unnecessary SSE emulation defines.
* Use full precision float division so we can enable it.
* Add sqrt(), sqr(), fabs(), shuffle variations, mask().
* Optimize reduce_add(), select().
Differential Revision: https://developer.blender.org/D2764
I need to use some macros defined in util_simd.h for float3/float4, to emulate
SSE4 instructions on SSE2. But due to issues with order of header includes this
was not possible, this does some refactoring to make it work.
Differential Revision: https://developer.blender.org/D2764
We already detect this automatically based on shading nodes and per shader
settings, and performance of this option is ok now all devices.
Differential Revision: https://developer.blender.org/D2767
This stores basic hair follicle data, rather than full fiber caches
(which should only be generated for render data).
Note that deformation by strands will just be one possible way to generate
hair fibers, so strands should be kept separate from the hair follicle data somewhat.
Currently only clumping and curls are implemented. There is no proper input
for the parameters yet, these are just hardcoded atm. Eventually the hair system
should either define uniform values from hair system settings or enable per-fiber
values using a material or other node-based input.
- New manipulator tracks lamps to position under cursor.
- Works with multiple lamps, keeping relative offsets.
- Holding Ctrl moves the lamp.
- Access via manipulator or Shift-T.
Code could be improved, but like to get feedback from users.
Render-border & crop-node 2d-cage manipulators where unreasonably
complicated to implement because there was no good way to define
the sub-region the manipulator was transforming in
(render border within the camera's frame for example).
Add matrix-space variable,
remove scale property from cage2d manipulator, use matrix instead.
Subdivision works on the parent strands for efficiency. The fibers lengths
are based on the final subdivided length of parents, so no changes to the
shader are required.
This would be nicer with a tesselation shader, but this feature is not
available in Blender 2.8.
Was doing this with property get/set but this made view operations
require refreshing manipulator properties.
Simplify by operating on properties in their own space.
Also disable clamping for now since it assumes pixel-space.
It turns out that 1D textures have the same size limit on their 1 axis as 2D textures.
This limits the potential number of hair dramatically, even though the actual size of
the texture is very small. Using a 2D texture and wrapping the index avoids this problem.
Two main things here:
1. Replace all unsafe for #line directive characters into a single loop,
avoiding multiple iterations and multiple temporary strings created.
2. Don't merge token char by char but calculate start and end point and
then copy all substring at once.
This gives about 15% speedup of source processing time. At this point
(with all previous commits from today) we've shrinked down compiled
sources size from 108 MB down to ~5.5 MB and lowered processing time
from 4.5 sec down to 0.047 sec on my laptop running Linux (this was a
constant time which Blender will always spent first time loading kernel,
even if we've got compiled clbin).
Add a safe version of normalize since all uses of normalize
did zero length checks, move this into a function.
Also avoid unnecessary conversion.
Gives minor speedup here (approx 3-5%).
This allows the shader to use proper lighting from the standard Eevee shaders.
The code for interpolating hair strands is in a glsl library file to facilitate
use in other engines later.
Basically gather lines as-is during traversal, avoiding allocating
memory for all the lines in headers.
Brings additional performance improvement abut 20%.
The idea here is that it is possible to mark certain include statements
as "precompiled" which means all subsequent includes of that file will
be replaced with an empty string.
This is a way to deal with tricky include pattern happening in single
program OpenCL split kernel which was including bunch of headers about
10 times.
This brings preprocessing time from ~1sec to ~0.1sec on my laptop.
The idea is to re-use files which were already processed. Gives about 4x speedup
of processing time (~4.5sec vs 1.0sec) on my laptop for the whole OpenCL kernel.
For users it will mean lower delay before OpenCL rendering might start.
Keyframe handle vertices (the circles on the ends of the handles)
should always be larger than the central vertex. This brings back the
"outer" radius value from the old gluDisk(), and doubles it to get the
necessary diameter, to scale it properly.
TODO's:
- Get rid of all fills inside these circles
- Make the central vertex square-shaped again
* Outlines of keyframes were too thick and ugly
* Size differences between keyframe types was being swallowed
by the pixel-fudge factor, leaving colour as the only distinguishing
factor (bad!)
This changes the Cycles exporting and Cycles/Eevee UI code to support both
output material nodes, giving priority to the renderer native one. Still
missing is Eevee code to prefer the Eevee output node.
Hair drawing requires fairly large vertex buffers. Vertices also need to be interpolated
and displaced according to the control (parent) hairs and hair-style features like curling
and clumping.
Instead of doing this in advance on the CPU and uploading a large vertex buffer every frame,
this work can be done on the GPU for realtime display, because interpolation and displacement
are highly parallelizable. The vertex buffers then only need to be uploaded once (as long
as strand lengths remain the same). The vertex format can also be very lightweight, requiring
only a curve parameter and index (half the size needed for full positions).
For interpolating a buffer texture is used in the shader, which contains all information
about the control curves (parents) from which to interpolate final vertex positions.
It now uses a quality slider instead of stride.
Lower quality takes larger strides between samples and use lower mips when tracing rough rays.
Now raytracing is done entierly in homogeneous coordinate space. This run much faster.
Should be fairly optimized. We are still Bandwidth bound.
Add a line-line intersection refine.
Add a ray jitter between the multiple ray per pixel to fill some undersampling in mirror reflections.
The tracing now stops if it goes behind an object. This needs some work to allow it to continue even if behind objects.
Running undo would notify manipulators to refresh,
but this still allowed for events in the queue to be handled,
where manipulators could be drawn for selection before
their refresh callback runs.
This made Python manipulators raise exceptions
about referencing invalid data (or crash).
Now tag manipulator update on file load (including undo)
and ensure the refresh callback runs
before drawing manipulator selection.
Also split manipulator map refresh flag in two since selection doesn't
perform the same operations as regular drawing.
This will only be noticeable for drawing many instances.
In contrived use-case with many instances, and `USE_PROFILE` disabled
this can close to double playback FPS.
The option to disable this is left in the code in case we want to
debug memory use.
See D2756 for details.
- Each allocation can be a different size
(but should be smaller than the chunk size).
- Result can be looped over in order of allocation.
- Allocations are aligned to pointer size to avoid unaligned reads.
This commit is a work forward having less updates during playback, which speeds
things up a lot here. The idea is simple: stop update all copy-on-write
datablocks (which implies full re-evaluation actually) on frame change and
re-use existing evaluated meshes as much as possible.
This brings playback speed to 24 fps on the dino test scene here. Performance
drops down a lot when armature is animated tho, but that's because of need of
tangent space calculation which we can't do much about from just a dependency
graph.
Hopefully this doesn't make copy-on-write too unstable, quick tests here are
surviving fine.
Old performance debug was doing queries for every frame even if not debugging perf.
Also, it did not record when a pass was draw multiple time, leading to incorect measurement.
New module also allows to group the timers to limit infos displayed.
Also fix the background CPU draw timer.
The purpose of the keymap strings is probably for un-embossed menu items
like seen in most pulldowns. I can't see a reason for also adding that
string for regularly drawn buttons within popups, we don't add it
anywhere else in the UI either. So this commit makes sure shortcut
strings are only added to buttons that are drawn like pulldown-menu
items.
This means once an ID is created,
it will keep using the same PyObject instance.
This has some advantages:
- Avoids unnecessary re-creation of instances on UI poll / redraw.
- Accessing free'd ID's gives an exception instead of crashing.
(long standing annoyance!, though this only applies to ID's
and not yet other data that uses the ID's - vertices for eg).
- Allows using instance comparison (a little faster).
Note that the instances won't be kept between undo.
Was doing 2x lookups which is OK for click-select
but this runs on mouse-move and can become slow.
May enable this again if highlighting logic changes.
Also scale hotspot by pixelsize.
- Cleanup array access, move into functions.
- Store allocated size to avoid realloc's on every add/remove.
- Make select editable from Python.
- Rename select callback to select_refresh
(collided with select boolean).
- Call select_refresh when de-selecting as well as selection.
This was cause by some post process not always sampling the highest mipmap.
But if there is no need for mipmapping (i.e. no SSR) these levels will be undefined.
So forcing all Post FX shader to sample level 0 fix this.
This add the possibility to use planar probe informations to create SSR.
This has 2 advantages:
- Tracing is less expensive since the hit is found much quicker.
- We have much less artifact due to missing information.
There is still area for improvement.
BKE_scene_copy explicitly ignores visibility of "source" collections make all
collections visible. This is also tested by regression tests.
While it seems more logical to simply preserve all possible visibility flags
and overrides, don't feel like submitting to a behavior-changes without talking
to author of those guards first.
This commit fixes cycles material preview.
If object is only listed in collection but not added to any of layers we shouldn't create
placeholder for it, because otherwise we'll leave lots of placeholder ID nodes.
Question: can we make this exception to be more reliable?
This commit separate the depth texture into another texture array.
This remove the need to output radial depth into alpha.
Unfortunatly it's difficult to recover position from the non linear depth buffer when applying reflection without adding a bunch of stuff.
This is in preparation of SSR planar reflections.
- Encode normals for other opaque bsdf so they are not rejected by the normal facing test.
- Early out non reflective surfaces.
- Add small offset to raytrace to avoid self intersection.
- Fix fallback probes not appearing.
Output in 2 buffers Normals, Specular Color and roughness.
This way we can raytrace in a defered fashion and blend the exact contribution of the specular lobe on top of the opaque pass.
Ideally need to clean and sane and impossible-to-break way of making sure
evaluation context is fully initialized, but that would need some thoughts
and experimentation.
Otherwise we'll have confused dependency graph builder, which wouldn't be able to
build proper graph.
Didn't find a way to avoid world copy here, we can probably escape with some shallow
copy here, but that will currently complicate code a lot.
Ideas to consider here:
- Use shallow copy of existing world after new ID management API is in place.
Downside would be thread safety, kind of nice to have everything local.
- Switch depsgraph away from ID_TAG and do hash lookup or so.
This will slow down depsgraph builder, but will make code more reliable.
Those functions did not use evaluation context.
Also fixed lots of unused variables warnings caused by commented out code which
needs to be ported away from DerivedMesh and to evaluation context.
Note that some little parts of code have been dissabled because eval_ctx
was not available there. This should be resolved once DerivedMesh is
replaced.
The remapping code was creating plkaceholders for objects coming from legacy
bases, but since those objects were never created by dependency graph (since
they are supposed to be ignored) the copy on write relations creation was
confused.
Now we do some special trickery to clear legacy bases on copy on write.
Currently RNA doesn't give us a good way of accessing singleton layers,
for now expose as a layer list (skin & paint-pask do this too).
Noted in T47811 that this should be changed.
Those checks are not always helpful, since id remapping doesn't want to
worry about which components to tag for update. Perhaps in the future we
will introduce special flag which would mean "tag everything possible"/
We get already enough reports of people complaining about crashes on
edit mode unaware that they are in the non-supported Blender Render
engine.
Blender Render is going away, no reason to keep it around. Once we have
a nice fallback on Eevee and fast file loading we can default to Eevee
instead.
This is the fake ID nature of compositor again. Need to discard such
pointers before freeing datablock even for scenes (before it was done
for objects only).
Previously it was possible to run into situation when armature is constructed prior to
objects which are used for it's constraints. This was causing wrong scene evaluation.
Now we create placeholders for objects used by armature in case they don't have ID node
yet, which ensures we have proper mapping from original to copy-on-write ID pointer.
This shows the bug when IK solver doesn't update reliably when targeted an external
object and when that object is handled by build_object() after the armature.
The issue was caused by id_copy_no_main() changing pointers of constraints used
in pose to a newly allocated ID. This is correct, but caused confusion too our
copy on write remapping, because we are mimicing inplace duplication by copying
memory over from a temporarily duplicated ID to a proper placeholder. This was
causing dangling pointers in pose to a temporarily allocated ID.
Now we add special code to remapping callback which replaces temporary ID with
a proper one.
Couple of main things here:
- Properly handle PSYS_UPDATE_* flags from DEG_id_tag_update.
There are still some possible issues here related on the fact
that we don't differentiate different PSYS_UPDATE_* flags here
and handle the mall the same.
Other possibility here is that object level particle settings
evaluation might be forced when particle system evaluation is
tagged for update. Didn't see actual issue here yet, but need
a closer look.
- Don't tag non-object datablocks on visibility changes.
Those don't depend on visibility anyway. This prevents particle
settings IDs from flushing updates to all objects, causing all
cached particles to be lsot.
- Only update translation and geometry components on visibility
changes.
Once again, this prevents particle cache from being invalidated.
We might need to tag material components here still tho.
This commit makes it so that only ID components which correspond to the tag
flag are tagged for update (previously the whole ID would have been updated
in the most of cases).
This allows us to have more granular tag flags and prevent tagging of things
we don't want to be tagged.
Previously tagging particle settings for update will iterate over all objects and
all their particle system to see whether something needs an update or not. Now we
put ParticleSettings as an ID to the dependency graph, so tagging it for update
will nicely flush updates to all dependent particle systems.
Current downside of this is that due to limitation of flush routines it will cause
some extra particle system re-evaluation when it technically not needed, and what's
more annoying currently it will discard point caches more often.
However, this is a good and simple demonstration case to improve tagging/flushing
system to accommodate for such cases (similar issues happens with CoW and shading
components). So let's try to find some generic solution to the problem!
This replaces usage of generic PLACEHOLDEWR with string lookup with more
explicit opcode. This should make it faster to build dependency graph by
avoiding string comparisons when it's not needed.
There should be no user measurable different.
For users that means you can tweak shaders in the nodetree and things
are way faster. This is a huge improvement, particularly in
systems that have no shader cache.
From the code perspective it means we are no longer re-compiling the
shader every time a value is tweaked in the UI. We are using uniforms
for those values.
It would be slow to add that many uniforms for all the shaders. So
instead we are using UBO (Uniform Buffer Objects).
This fixes the main issue of T51467. However GWN_shaderinterface_create() still
needs to be improvedi. When opening a .blend all shaders are compiled once, so
optimizing it will bring a measurable impact.
========================================================================
NOTE: This breaks update of Cycles material upon nodetree nodes
tweaking. It will be fixed separately by depsgraph, once tackling T51925
(Animated Eevee values slowdown).
The idea is to make Depsgraph update more granular. The XXX TODO in
rna_nodetree.c will be tackled at that time as well.
========================================================================
Reviewers: sergey, brecht, fclem
Differential Revision: https://developer.blender.org/D2739
This commit makes simple cases to work, for example:
- IK solver to an external object
- Object with Armature modifier, "parented" to the deforming armature
(via animation).
More complicated setups (like agent rig) are crashing still.
If you merge from master to blender2.8 after a commit, remember to test in 2.8, otherwise what is the point?
Specially if it's a non-essential commit such as c9817c67fc.
Bug introduced on: f4155d3778 (the merge
that included the above commit).
This commit effectively makes workspace switching useless as far as the
active scene layer goes.
The functions from the scene layer API to get the correct scene layer
from "context" were a placeholder to be addressed by the workspace
commit.
When workspace was merged, however G.main was used as a replacement to pass the
correct argument for the functions. As it turned out (surprise!) this
leads to crash on render preview.
We need to get rid of:
* BKE_scene_layer_context_active_ex_PLACEHOLDER
* BKE_scene_layer_context_active_PLACEHOLDER
And either use SceneLayer explicitly or replace it by:
* BKE_scene_layer_from_workspace_get
Goal is to make them more modular, to allow more variants (variable
single-color, thickness, ...) to be added without having to
copy-and-change-one-line of whole chain of shaders.
This is a first step towards proper depsgraph "ownership", where
we would allow scene to be in multiple states dependent on active
workspace or scene layer.
This commit introduces a basic API to get proper dependency graph
for a given scene layer. It also renames scene->depsgraph to
depsgraph_legacy, so it's easier to search0-n-replace in the future.
Hashed Alpha transparency offers a noisy output but has the benefit of being correctly ordered. Noise can be attenuated with Multisampling / AntiAliasing.
The "fix" happened due to a mistake in copy-on-write commit, that mistake solved
preview render but broke something else.
This reverts commit 45720922f7.
UVs need specific data in the VBO, which is not computed unless the
shaders assigned to the mesh actually use UVs. When adding UVs to the
shader, the VBOs were not being recomputed to include the required data.
This adds a DEG relation between the shader and the mesh, and recomputes
the required data if the shader changed.
Thanks Sergey, for all the DEG stuff...
A pointer to the uniform data for the empty drawing was being freed
before the actual draw call, which invalidates the uniform.
This makes the data only be freed after drawing.
Up until now users had to switch to Blender Internal to set the dimension of their openGl renderings. This simple change adds the panel at the top of the scene render tab.
It's cause by degenerate triangle having normals set to (0,0,0) which may not be compressed like it should.
This fix the problem in the final indirect lighting evaluation which might be costly.
The issue was caused by updates being flushed for all scenes, while actual update
was only called for an active one.
Not sure why do we need to flush updates for all scenes, so now we only flush
scenes which are updated.
This makes no sense to add theses. In cycles, each volume node is computed separatly. In eevee only the combined parameters are evaluated and phase should be averaged in this case.
This allow specialized shaders to redefine the closure interface to fit their needs.
For instance, Volumetric closure needs to pass more than one vec4 (absorption vec3, scattering vec3, anisotropy float).
At the moment libblock_remap_data_preprocess is using
FOREACH_SCENE_OBJECT to iterate over all the objects of the scene and
unlink them.
However we were storing a reference to the Base of the removed object.
Anyways, the loop is now sanitized so that this crash no longer happens.
Also now we have an unittest for this.
Now computers that support OpenGl3.3 (but not 4.5) can run Blender 2.8.
For any given HDC, you may only call SetPixelFormat *ONCE* any future
calls for the same HDC will fail. And computers that would support only
OpenGL 3.3 wouldn't have a change to get a valid OpenGL context because
the pixelformat was already set while trying to probe the supported
contexts.
We fix this by splitting the final context creation from the query of
supported OpenGL versions.
Patch by Ray Molenkamp (bzzt_ploink/LazyDodo) with code style fixes and
comments by me.
To recompile all the shaders is expensive. And something to be avoided at all costs.
It was needed before because for every new lamp in the file we needed to
recompile the shaders. Now this is no longer required since we are using
UBOs for the sahders.
This avoids using GWN_vertbuf_attr_set which needs to calculate the
offset and perform a memcpy every call.
Exposing the data directly allows us to avoid a memcpy in some cases
and means we can write to the vertex buffer's memory directly.
Was doing O(n^2) list lookups with blender-render drawing & transform.
Also missing NULL checks would crash.
Use Object.base_flag (already used by new draw manager in places)
to avoid list lookup.
Note, transform still performs inefficient lookups,
but only for selected parents (like 2.7x), not all parents.
Read from the GPUMaterial to find custom-data layers used for drawing.
This resolves problem where having UV's would always calculate tangents
causing noticeable slow down compared to 2.7x.
Add a safe version of normalize since all uses of normalize
did zero length checks, move this into a function.
Also avoid unnecessary conversion.
Gives minor speedup here (approx 3-5%).
This commit makes the fullsample option for viewport renderings always
on: Render > OpenGL Render Options > Full Sample.
(The UI still allows users to set this, so we will need to revisit this
before 2.8 releases).
Even in computers that can handle MSAA we had issues.
The way Blender gpu_* implementation is handling anti-aliasing is buggy.
For example, in Blender 2.7x if you have depth of field in a viewport
with multi-sampling, the DoF gives us jagged edges.
Since Eevee uses framebuffers for a lot of things, this issue was
leading to very visible buggy render in some computers, and more subtle
inconsistent buggy renders in others (easy to test with the depth of
field in Eevee).
Some code for freeing shaders on scene updates (because of previous
dependency shaders had on lamps) had been disabled, as it is no longer
required. This removes that code altogether.
Object shaders no longer depend on lamp data at compile time, thus they
don't need to be invalidated when lamps change. Disabling shader
recompilation allows fast viewport updates when changing lamp settings.
Note that even though shaders for lamps are currently not being used,
`lamp_changed` is still freeing the lamp shaders, as at some point we
might want to use shaders for lamps...
This also renames some flags/variables to be more generic for updating
purposes. The call used here was previously only used for updating
paint data, but as it was reused here, flags and variables were renamed
to accomodate more clearly to the new usages.
Shadow catching was disabled for hair in Eevee, because of an issue in
the shadow maps. The issue has since been resolved, so this re-enables
shadow catching for hair.
Not a single node based shader was working since a recent merge from
master.
The merge brought changes from the principle bsdf shader where
unsupported gl_ProjectionMatrix was still being used.
Initial support for Python/Manipulator integration
from 'custom-manipulators' branch.
Supports:
- Registering custom manipulators & manipulator-groups.
- Modifying RNA properties, custom values via get/set callbacks,
or invoking an operator.
- Drawing shape presets for Python defined manipulators (arrow, circle, face-maps)
Limitations:
- Only float properties supported.
- Drawing only supported via shape presets.
(we'll likely want a way to define custom geometry or draw directly).
- When to refresh, recalculate manipulators will likely need
integration with notifier system.
Development will be continued in the 2.8 branch
Note that this drops all changes from master,
useful commits will need to be cherry-picked.
Did this since most commits were relating to UV/textures
which is complicated by texface being removed in 2.8
Technically this enables the use of MinmaxZ pyramid inside the probe captures.
Also Disable AO for cubemap probes because it shows big discontinuities at cubeface limits.
The problem was that the depth prepass was using the clip plane but not the shading pass.
During the clipping stage, the triangle is converted to a quad clipped to the given clip plane.
But this introduce subtle changes in the depth when this new geometry is rasterized. Since the shading pass was using an EQUAL depth test, the depth values from the shading pass were not always equal to the depth prepass.
Enabling clipping in the shading vertex shader has a too small impact to require a dedicated shader.
This fixes an issue introduced by the new output node system, where "No
output node" was displayed in the material panel even when an output
node was present.
Naming was confusing, while technically correct -
the result is no scaling (manipulator ignores zoom-level).
Also remove 3D from name since this can be supported for 2D views too.
Although we are calling all of them light probes, there are a lot of
differences between them. This commit does the following:
* Prevent user from changing the probe type once added
* Unify "sphere" and "cube" probes into reflection cubemap
(as before you can switch between them from the probe UI)
To be done
==========
* Don't show add probe menus unless we are on Eevee
* Light probes panels should not be visible in Clay. Light probe objects
should not be visible in Clay viewport (nor on Cycles).
Notes
=====
* We need icons for the different light probes, and for lightprobes as a
whole (we are using RADIO for now).
Changes from custom-manipulator branch.
- use property type definitions.
- add property free callback.
- move properties into the wmManipulator struct (over alloc).
- use array length from property types instead of arg passing.
Implement GTAO (Ground Truth Ambient Occlusion) which is a special case of Horizon Based Ambient Occlusion that is more physically accurate.
Also add a bent normal option to sample indirect irradiance (diffuse lighting) with the least occluded direction.
- Unify variations between default shaders and material shader.
- Only create default shader passes if needed.
Downside is that we have a big array of passes and shading grp in the vedata ... And it will double in size each time a new variation flag is added.
This commit introduce the computation of a depth pyramid containing min and max depth values of the original depth buffer.
This is useful for Clustered Light Culling but also for raytracing on the depth buffer (SSR).
It's also usefull to have to fetch higher mips in order to improve texture cache usage.
As of now, 1st mip (highest res) is half the resolution of the depth buffer, but everything is already done to be able to make a fullres copy of the depth buffer in the 1st mip instead of downsampling.
Also, the texture used is RG_32F which is a too much but enough to cover the 24bits of the depth buffer. Reducing the texture size would make things quite faster.
This special case function enables rendering to a miplevel while using the miplevels above as texture input.
This is needed for some algorithm (i.e. creating a min-max depth pyramid texture).
This makes manipulator access closer to operators,
and allows Python access.
This adds RNA for manipulators, but not Python registration yet.
- Split draw style into 2x settings:
`draw_style` (enum) & `draw_options` (enum-flag)
- Rename wmManipulator.properties -> properties_edit,
Use wmManipulator.properties for ID-properties.
Note that this area of the API will need further work since
manipulators now have 2 kinds of properties & API's to access them.
Quicker to find the ID-subtype then use direct pointer comparisons.
Also modify `ID_code_to_RNA_type` so missing ID-codes raise a warning
(handy when adding new ID types).
We should be able to differentiate between OpenGL render (viewport
render), offline render (F12), and view render (viewport draw).
This allows for us preventing offline render to skip mode drawings, grid, ...
Even OpenGL render can benefit from this forcing a higher quality
anti-alias and sampling than the viewport drawing.
I'm not sure if it's clever to keep the memset(0x00) outside the render
loop function as it is in this patch. An alternative is to just pass the
render "type" as a flag to the render function, and set DST.options
inside it. (I may change this tomorrow, I will wait to hear from
Campbell on that).
This makes the node menus aware of the Cycles/Eevee distinction, and
only show the relevant nodes for the current engine. Names have also
been changed to accomodate for the new output node system.
This makes Eevee consistent with Cycles, by having a single output node,
and multiple shader nodes that connect to it.
Note that node systems for Eevee saved before this will be missing the
output node, and thus will show an invalid material. This is easily
resolved by connecting the shader output to a new output node.
This makes it possible to select objects in the viewport.
Selection in edit mode is still tricky, mainly because currently such update
would require tagging batch as updated, which is not possible with using just
and original object because it will never have batch.
Possible solution here would be to introduce some "batch" or "render" component
to depsgraph ID node for objects, so we can tag batch for update via depsgraph
tagging API.
< Dependency graph Copy-on-Write >
--------------------------------
\ ^__^
\ (oo)\_______
(__)\ )\/\
||----w |
|| ||
This is an initial commit of Copy-on-write support added to dependency graph.
Main priority for now: get playback (Alt-A) and all operators (selection,
transform etc) to work with the new concept of clear separation between
evaluated data coming from dependency graph and original data coming from
.blend file (and stored in bmain).
= How does this work? =
The idea is to support Copy-on-Write on the ID level. This means, we duplicate
the whole ID before we cann it's evaluaiton function. This is currently done
in the following way:
- At the depsgraph construction time we create "shallow" copy of the ID
datablock, just so we know it's pointer in memory and can use for function
bindings.
- At the evaluaiton time, the copy of ID get's "expanded" (needs a better
name internally, so it does not conflict with expanding datablocks during
library linking), which means the content of the datablock is being
copied over and all IDs are getting remapped to the copied ones.
Currently we do the whole copy, in the future we will support some tricks
here to prevent duplicating geometry arrays (verts, edges, loops, faces
and polys) when we don't need that.
- Evaluation functions are operating on copied datablocks and never touching
original datablock.
- There are some cases when we need to know non-ID pointers for function
bindings. This mainly applies to scene collections and armatures. The
idea of dealing with this is to "expand" copy-on-write datablock at
the dependency graph build time. This might introduce some slowdown to the
dependency graph construction time, but allows us to have minimal changes
in the code and avoid any hash look-up from evaluation function (one of
the ideas to avoid using pointers as function bindings is to pass name
of layer or a bone to the evaluation function and look up actual data based
on that name).
Currently there is a special function in depsgraph which does such a
synchronization, in the future we might want to make it more generic.
At some point we need to synchronize copy-on-write version of datablock with
the original version. This happens, i.e., when we change active object or
change selection. We don't want any actual evaluation of update flush happening
for such thins, so now we have a special update tag:
DEG_id_tag_update((id, DEG_TAG_COPY_ON_WRITE)
- For the render engines we now have special call for the dependency graph to
give evaluated datablock for the given original one. This isn't fully ideal
but allows to have Cycles viewport render.
This is definitely a subject for further investigation / improvement.
This call will tag copy-on-write component tagged for update without causing
updates to be flushed to any other objects, causing chain reaction of updates.
This tag is handy when selection in the scene changes.
This basically summarizes ideas underneath this commit. The code should be
reasonably documented.
Here is a demo of dependency graph with all copy-on-write stuff in it:
https://developer.blender.org/F635468
= What to expect to (not) work? =
- Only meshes are properly-ish aware of copy-on-write currently, Non-mesh
geometry will probably crash or will not work at all.
- Armatures will need similar depsgraph built-time expansion of the copied
datablock.
- There are some extra tags / relations added, to keep things demo-able but
which are slowing things down for evaluation.
- Edit mode works for until click selection is used (due to the selection
code using EditDerivedMesh created ad-hoc).
- Lots of tools will lack tagging synchronization of copied datablock for
sync with original ID.
= How to move forward? =
There is some tedious work related on going over all the tools, checking
whether they need to work with original or final evaluated object and make
the required changes.
Additionally, there need synchronization tag done in fair amount of tools
and operators as well. For example, currently it's not possible to change
render engine without re-opening the file or forcing dependency graph for
re-build via python console.
There is also now some thoughts required about copying evaluated properties
between objects or from collection to a new object. Perhaps easiest way
would be to move base flag flush to Object ID node and tag new objects for
update instead of doing manual copy.
here is some WIP patch which moves such evaluaiton / flush:
https://developer.blender.org/F635479
Lots of TODOs in the code, with possible optimization.
= How to test? =
This is a feature under heavy development, so obviously it is disabled by
default. The only reason it goes to 2.8 branch is to avoid possible merge
hell.
In order to enable this feature use WITH_DEPSGRAPH_COPY_ON_WRITE CMake
configuration option.
Maybe not very useful but it's here for feature parity with the other probes.
The fragment shader clipping is here because I'm lazy and don't want to creating a proper quad Batch.
This avoids having to use manipulator-type specific functions
to set the orientation.
And will make it simpler to access transformation from Python.
Currently the matrix is still used as an offset in places.
Also per-type orientation values still need to be removed.
- Option to start helper angle lines based on a vector
instead of the initial mouse coords (useful for bisect & spin).
- Option to show 2x helper lines
useful when dial is used to rotate an axis value.
Calculation was done in screen-space giving inaccuracy,
making the angle incorrect for tool code.
Cast mouse coords onto the dial plane to calculate the angle instead.
Instead use generic 'WM_manipulator_new', adding a new 'setup'
callback (like wmManipulatorGroup.setup) used to initialize type vars.
This moves conventions closer to wmOperator and simplifies exposing to
Python.
This is needed so manipulators can tag themselves for removal
without causing problems from freeing data within a callback.
Also use properties within the dial manipulator and fix an error where
removing a wmManipulatorGroupType didn't remove its keymap.
While this is work-in-progress from custom-manipulators branch
its stable so adding into 2.8 so we don't get too much out of sync.
- ManipulatorGroupType's are moved out of the manipulator-map and are now
global (like operators, panels etc) and added into spaces as needed.
Without this all operators that might ever use a manipulator in the 3D
view would be polling the viewport.
- Add optional get/set callbacks for non-RNA properties
Needed so re-usable manipulators can control values that
don't correspond to a single properly or need conversion.
- Fix divide by zero bug in arrow manipulator (when moving zero pixels).
Early implementation. Slow and still has quality
3 ways of storing irradiance:
- Spherical Harmonics: Have problem with directionnal lighting.
- HL2 diffuse cube: Very low resolution but smooth transitions.
- Diffuse cube: High storage requirement.
Also include some name change.
This is similar to some other datablocks. Mainly applies to collections,
so freeing scene does not involve changing any non-directly owned data.
There are two main usecases foreseen for the future:
- Less CPU ticks on bmain free, where everything is freed anyway and
there is no need to preserve id counters.
- Easier freeing of temporary data, including data which is used by
depsgraph's copy-on-write mechanism.
Neither of those are currently implemented, but will be shortly.
New implementation of hair for Eevee.
Note: A hard coded "transmission" property is being used. This should
eventually be exposed to the UI, possibly in the form of SSS
properties.
This stops the memory breakage caused by the material preview jobs,
to enable the new hair drawing implementation.
(This should be reverted once T51796 is actually fixed!)
There is no reason to be special for workspace and go against other design
decision in Blender. If something like this is going to become a common
practice in Blender it should be well thought and well tested, including
tests of all supported compilers and configurations.
This feature was relying on type re-definition, which is not only confusing
but also available in C11 only.
I considered just copying the evaluated data from the LayerCollection.
However we need to run the evaluation so Depsgraph can handle overrides.
I will double-check with Sergey Sharybin.
We need to traverse the same exact objects for both nodes and relationship
builder. We were using FOREACH_SCENE_OBJECT for relationships, which
would lead to plenty of warnings in multiple situations.
In the future we will need to change this to build the depsgraph
relations and nodes to one single render_layer.
Fix T51780: If an object is in two collections and I do a full copy of
scene things go bad
Sync with custom-manipulators branch
- Use identifiers for properties.
- Property array index access.
- Remove operator from manipulators
(wasn't used and will likely add in a different way).
One 1024px² octahedral probe (according to the GPU mem stats):
- RGBA16F = 17Mb
- RGB_11_11_10 = 4Mb
For the time being I prefer to maximize the number of probe possible in the scene for users to test.
This is obviously a temporary solution and the final choice of cubemap format should be exposed to the user.
After using it for like 30 sec, the min max bound box is absolutely not practical. Reverting into using a unit cube with object transform.
This also simplify the code.
In the future of center probes will be implemented using another object matrix (via an object pointer).
Probes were completely out of depsgraph, so tagging them could not work at all.
For now using some placeholder operations just to ensure order of updates.
We still do it a few times, but that helps already. Related to T51718.
Note that it also reinforces the idea that any geometry datablock will
have a generated copy-on-write Mesh provided by Depsgraph.
Regular camera lens have a ratio of 1.0. The anamorphic bokeh can be
used freely as an artistic decision, but it's nice to clamp it to 2.0,
to match real cameras.
That end up giving a reference for artistis playing with the
parameters unaware of the more realistic limits.
This was introduced in 23c93873f4.
This could be moved to deg_flush_base_flags_and_settings but since we
only need this for duplis I think it's fine to be handled separately.
Use indirect access to it via object.
It was already flushing from base to object, now we can avoid such flushing.
Still weird to have selection color filled in by dependency graph, but now
there is no synchronization going on at least.
As with operators, the window-manager has the API for defining,
the editor can implement and register its own manipulators.
This exposes wmManipulator, keeping it opaque isn't
practical if editors and Python are to implement their own.
UNIFORM_NONE should never match a valid uniform (builtin or custom).
The logic for UNIFORM_CUSTOM was just wrong, since it returned the first custom uniform. This function should only accept builtin (non-custom) uniforms.
Quick hash rejection instead of string comparison. Uniform lookups already work this way. I don't expect a major overall speedup since attributes are looked up less frequently than uniforms.
The issue was caused by usage of address of dupli-object (which will vary
from iteration process to iteration process) as something denoting whether
we've got the data synchronized to Cycles or not.
For now solved by using address of original object (the one DupliObject
points to) as a pointer for the map.
Need to do more thoughts about this.
This is supposed to help catch bugs if referrencing stack data out of
the draw loop context.
No change is suppose to happen for users (specially because the changes
here happens mostly on debug).
It includes a change in the logic for render loop, to make sure DST is
not accessed before we enter it - contribution by Campbell Barton.
This commit extends the work from Dalai made around scene iterators to
support iterating into objects from dupli-lists.
Changes can be summarized as:
- Depsgraph iterator will hold pointer to an object which created current
duplilist. It is available via `dupli_parent` field of the iterator.
It is only set when duplilist is not NULL and guaranteed to be NULL
for all other cases.
- Introduced new depsgraph.duplis collection which gives a more extended
information about depsgraph iterator. It is basically a collection on top
of DEGObjectsIteratorData.
It is used to provide access to such data as persistent ID, generated space
and so on.
Things which still needs to be done/finished/clarified:
- Need to introduce some sort of `is_instance` boolean property which will
indicate Python and C++ RNA that we are inside of dupli-list.
- Introduce a way to skip dupli-list for particular objects.
So, for example, if we are culling object due to distance we can skip all
objects it was duplicating.
- Introduce a way to skip particular duplicators.
So we can skip iterating into particle system.
- Introduce some cleaner API for C side of operators to access all data such as
persistent ID and friends.
This way we wouldn't need de-reference iterator and could keep access to such
data really abstract. Who knows how we'll be storing internal state of the
operator in the future.
While there is still stuff to do, current state works and moves us in the proper
direction.
We only show object center if object is selected, active or if viewport
has the "All Object Origins" options.
The viewport display options can migrate to renderlayer options.
However, we can mimic 2.7x as a compromise while the final design is
finalized.
This way we are not afraid of recursion being too deep.
That could have happened when having two collections which
are sharing same list of 1000s of objects.
- Move callbacks into type struct.
- Rename render_3d_intersection -> draw_select.
- Add header for function signatures (needed for types and api headers).
- Add WM_manipulatormaptype_find
Replace completly random noise by Blue noisen, giving a better aspect.
Also randomize the distance in the sample direction to cover the whole distance even with 1 sample. Using another blue noise for this.
Replace spiral samples (that had tendency to align if the number of samples was near the chosen constant) with Hammersley samples that have good coverage even for low number of samples.
Use a UBO instead of Texture (a bit less latency) making things a tiny bit faster.
Move the noise data to the SceneLayerData, because each render layer can have a different sample count.
Separate material handling inside another file.
Make use of enums to identify shader variations.
Group all 64*64 LUTs into one array texture.
Only update world probe if world changes.
Cycles is using rna_depsgraph, not rna_scene. Duplis are still not working there
but now at least it shows it was showing before the commit.
To show duplis in Cycles do:
- data->flag = DEG_OBJECT_ITER_FLAG_SET;
+ data->flag = DEG_OBJECT_ITER_FLAG_ALL;
Now dupli groups, objects, particles, ... are all working.
This introduces a flag for the iterator to determine whether we go over
Set and dupli objects or not.
Important to remember to keep the iteration of DEG_ as readonly.
Cycles is not working well for dupli groups, and it's memleaking
for dupli particles. So for now we iterate over main objects and set
only, not dupli.
To change that go in rna_scene.c and:
-DEG_OBJECT_ITER(graph, ob, DEG_OBJECT_ITER_FLAG_SET)
+DEG_OBJECT_ITER(graph, ob, DEG_OBJECT_ITER_FLAG_ALL)
Review and suggestions by Sergey Sharybin
This commit moves the list of transform orientations from scenes to workspaces.
Main reasons for this are:
* Transform orientations are UI data and should not be stored in the scene.
* Introducion of workspaces caused some (expected) glitches with transform orientations. Mainly when removing one.
* Improves code.
More technically speaking, this commit does:
* Move list of custom transform orientations from Scene to WorkSpace struct.
* Store active transform orientation index separate from View3D.twmode (twmode can only be set to preprocessor defined values now).
* Display custom transform orientation name in header when transforming in it (used to show "global" which isn't really correct).
This commit does the main integration of workspaces, which is a design we agreed on during the 2.8 UI workshop (see https://wiki.blender.org/index.php/Dev:2.8/UI/Workshop_Writeup)
Workspaces should generally be stable, I'm not aware of any remaining bugs (or I've forgotten them :) ). If you find any, let me know!
(Exception: mode switching button might get out of sync with actual mode in some cases, would consider that a limitation/ToDo. Needs to be resolved at some point.)
== Main Changes/Features
* Introduces the new Workspaces as data-blocks.
* Allow storing a number of custom workspaces as part of the user configuration. Needs further work to allow adding and deleting individual workspaces.
* Bundle a default workspace configuration with Blender (current screen-layouts converted to workspaces).
* Pressing button to add a workspace spawns a menu to select between "Duplicate Current" and the workspaces from the user configuration. If no workspaces are stored in the user configuration, the default workspaces are listed instead.
* Store screen-layouts (`bScreen`) per workspace.
* Store an active screen-layout per workspace. Changing the workspace will enable this layout.
* Store active mode in workspace. Changing the workspace will also enter the mode of the new workspace. (Note that we still store the active mode in the object, moving this completely to workspaces is a separate project.)
* Store an active render layer per workspace.
* Moved mode switch from 3D View header to Info Editor header.
* Store active scene in window (not directly workspace related, but overlaps quite a bit).
* Removed 'Use Global Scene' User Preference option.
* Compatibility with old files - a new workspace is created for every screen-layout of old files. Old Blender versions should be able to read files saved with workspace support as well.
* Default .blend only contains one workspace ("General").
* Support appending workspaces.
Opening files without UI and commandline rendering should work fine.
Note that the UI is temporary! We plan to introduce a new global topbar
that contains the workspace options and tabs for switching workspaces.
== Technical Notes
* Workspaces are data-blocks.
* Adding and removing `bScreen`s should be done through `ED_workspace_layout` API now.
* A workspace can be active in multiple windows at the same time.
* The mode menu (which is now in the Info Editor header) doesn't display "Grease Pencil Edit" mode anymore since its availability depends on the active editor. Will be fixed by making Grease Pencil an own object type (as planned).
* The button to change the active workspace object mode may get out of sync with the mode of the active object. Will either be resolved by moving mode out of object data, or we'll disable workspace modes again (there's a `#define USE_WORKSPACE_MODE` for that).
* Screen-layouts (`bScreen`) are IDs and thus stored in a main list-base. Had to add a wrapper `WorkSpaceLayout` so we can store them in a list-base within workspaces, too. On the long run we could completely replace `bScreen` by workspace structs.
* `WorkSpace` types use some special compiler trickery to allow marking structs and struct members as private. BKE_workspace API should be used for accessing those.
* Added scene operators `SCENE_OT_`. Was previously done through screen operators.
== BPY API Changes
* Removed `Screen.scene`, added `Window.scene`
* Removed `UserPreferencesView.use_global_scene`
* Added `Context.workspace`, `Window.workspace` and `BlendData.workspaces`
* Added `bpy.types.WorkSpace` containing `screens`, `object_mode` and `render_layer`
* Added Screen.layout_name for the layout name that'll be displayed in the UI (may differ from internal name)
== What's left?
* There are a few open design questions (T50521). We should find the needed answers and implement them.
* Allow adding and removing individual workspaces from workspace configuration (needs UI design).
* Get the override system ready and support overrides per workspace.
* Support custom UI setups as part of workspaces (hidden panels, hidden buttons, customizable toolbars, etc).
* Allow enabling add-ons per workspace.
* Support custom workspace keymaps.
* Remove special exception for workspaces in linking code (so they're always appended, never linked). Depends on a few things, so best to solve later.
* Get the topbar done.
* Workspaces need a proper icon, current one is just a placeholder :)
Reviewed By: campbellbarton, mont29
Tags: #user_interface, #bf_blender_2.8
Maniphest Tasks: T50521
Differential Revision: https://developer.blender.org/D2451
Before this change Gawain was doing list lookup twice,
doing string comparison of every and each input which
is not efficient and not friendly for CPUs with small
cache size.
Now we store hash of input name together with actual
name and compare hashes first. Additionally, we do
everything in a single pass which is much better from
cache coherency point of view.
This brings Eevee cache population time from 80ms to
60ms on my desktop and from 800ms to 400ms for Clement
when navigating in a file from T50027.
Reviewers: merwin, dfelinto
Subscribers: fclem
Differential Revision: https://developer.blender.org/D2697
Add face maps, needed for face-map widgets,
only data structure, widgets will be separate commit.
This comes from 'custom-manipulator' branch with only minor changes.
This enables us to use 2D texture arrays for multiple probes.
There is a little artifact with very high roughness caused elongated pixel due to the projection (along every 90° meridian).
We now floor the corner position and use this position as origin.
This gives us perfect derivatives in all cases even if very far from the origin.
Unfortunately this won't fix the low precision of coordinates used for computing the actual grid size, resulting in thick, non-smoothed lines.
Also did a bit of refactor how the axes are drawn.
Do not use the inverse perspective matrix inside the shader to recover world positions.
That leads to severe float imprecision leading to nasty artifacts.
Instead we compute the world view vector for each pixels and do a ray to plane intersection.
We are still getting low precision derivatives when going far away from the origin, and thus artifacts.
This commit also fixes the non-appearing negative Z axis in 3D view.
Note for users
==============
The active_layer option used for the filebrowser operators is now called
active_collection.
If there is no collections in the scenelayer or if this option is not selected
we automatically create a new collection for the new objects.
This is the same behaviour of trying to add a new object when there is
no collection.
Note for developers
===================
For those cases I moved the object user count handling from readfile to
the scene collection system. It's working fine for those, but we still
need to re-visit this for Add objects, and Duplicate - In those cases
the usercount is 2 when it should be 1.
Reviewers: mont29, sergey
Differential Revision: https://developer.blender.org/D2686
- Derived-mesh drawing.
- All non UV members of TexFace structs.
MTexPoly is now redundant but keeping with a dummy member,
will check on complete removal later.
TexFace complicates the now more popular shading pipeline by having
per-face images, see: T51382 for details.
To keep the ability to select a per-material edit-image
(used with UV-mapping workflow), the material now stores an image
which will be set when changing images in edit-mode.
This is used as a bake-target when not using Cycles too.
Storing edit-mesh data as indices for passing
only to get back edit-mesh data.
This also complicated checks for real edges in tessellation tris.
Simpler to pass data directly.
This function is not performance critical, but I prefer the branch-free code and no hack needed to appease gcc.
Follow-up to recent 23035cf46f and f637145450.
Goal is to make most of the API independent of OpenGL, Vulkan, any other backend.
Able to remove default case from ElementList_size because IndexType only covers index types. Not that and *everything else* like GLenum.
We render linear distance to the light in a R32 texture and store it into an octahedron projection inside a 2D texture array.
This render the sampling function much more simpler and without edge artifacts.
Shader stages need to agree about interpolation qualifiers. Apparently implicit smooth (the default) and explicit smooth are considered different by some GLSL compilers. Found by @letterrip on Linux + Intel.
Follow-up to 941e739d70
prefer vector math over scalar
prefer * over /
shorten vec3(x, x, x) to vec3(x)
use clamp, max, etc. instead of custom logic
declare loop vars as part of for loop
spacing
vertexColor output was not being written --> shader failed to link --> assert hit while setting that shader's uniforms.
Vertex attribs are smooth by default, so I shortened the declaration.
@fclem or @dfelinto: is color = 0 ok here?
This still has a couple of issues:
* Instancing is not working when multiple particle systems use the same
primitive. Only the last particle system to be drawn with a particular
primitive shows up.
* Because of colors being passed as uniforms with static variables, the
color of the collection of the last object to be evauluated is used for
all particles being displayed.
Also, note that while this is being drawn in the clay engine, this might
be moved to the object mode later intead.
Part of T51378
This was introduced by a removed line in
rB0eb32ab22809d9c0c41bfff5082f58b1a7aa9965
If we want to change the value to a differen default, it should be done
in a separated commit.
We only keep this as a way to get GPU_stubs to run, in case we want to do a
throughout cleanup in the codebase and want code using legacy calls to
fail to build.
There is no more point of keep those around. ES20 may need special case
when/if we dabble with it again. Meanwhile no point on polluting the
code with this.
(ghost still has reference for the PROFILE, but that's reasonable)
In the move to OpenGL 3.3 core profile, we drop support for compatibility profile and older versions.
OpenSubdiv was the only user; I'll update OSD next.
Now we always use GLSL 3.3, AKA #version 330. Most of the extensions we used are built into OpenGL 3.3 so we don't need them anymore.
Cleaned up comments related to GLSL version.
Part of T49012
These are always supported now
- instancing as of GL 3.1
- geometry shaders as of GL 3.2
The change to rna_scene.c could use some cleanup, since we don't really need a runtime query function.
The "Modern Viewport" was an option in the Viewport panel that would use
the new fancy wire frame code and some depth debugging functionality.
This was introduced as a quick and dirty way to get the new drawing
system showing in the viewport.
Overtime we built a complete Draw Manager system, leaving this original
approach deprecated which adds clutter to Blender code since it would be
removed sooner or later.
Note: The new fancy wireframes and related shaders (white out other
objects) are still in Blender code, though you can't use them anymore.
If we are to have any of those drawing options they should be integrated
in the new draw manager, instead of integrated in the old drawing
pipeline as it was originally coded.
This commit fixes two issues:
- UV/Image editor uvs menu did not match the 3D View's which was changed in rB2b240b043078
- Circle select tool was missing in particle edit mode
Reviewers: Severin
Differential Revision: https://developer.blender.org/D2329
It works with Cycles and Blender Internal for now.
The Blender Internal support will disappear, but we should be able to
integrate it with the Draw manager and use it with Clay, Eevee, ...
Mainly adding 'wire' suffix to wire/distance drawing func and shader.
Also, match wire vertex shader behavior with solid one regarding
head/tail only drawing (i.e. alwas expect head bone mat, never tail one,
and assume that if a radius is negative, then we only draw on the other
end of the bone).
Envelope bones are now pretty much identical to old drawing code.
Note that currently new DwM drawing code does not seem to care about
wire/solid drawing modes at all, guess this is still TODO... For now we
hence just get both wire and solid for envelope bones, this can be
refined later.
This is not complete, it does not implement 3D solid drawing of
envelope bones. 2D wire is hence always drawn for now.
Some notes:
I did not try to implement the 'capsule' approach suggested by @fclem, because:
1. I spent enough time on this already, and finally got something working.
2. I managed to get rid of geometry shader completely.
3. Current approach allows us to use same shader for
distance outline and envelope wire.
It's working fine, except for one glitch - superpositions of envelope
outlines do not work as expected, not sure what's wrong here, tried to
disable zbuff, enable GL_BLEND, no luck so far...
I think we need our own 'background' drawpass to get them working (also
to avoid them drawing over the wire lines).
Was using intermediate functions to store each data type.
This is still done in some places (for more involved access).
For basic data: coords, normals, colors..etc this is unnecessarily indirect.
-Use 11_11_10 buffers for hdr content.
-Eevee compositing share 1 buffer if bloom and DOF are both activated.
-Fix slowdown when resizing EEVEE viewport.
-Removed DRW_BUF_*** enums causing confusion.
We should avoid casting from an int to a flag.
In this case it is probably fine, but if the OB_MODE_SCULPT
was too high it can overflow the bool.
(also adding explicit parenthesis to a flag check)
Although this is working fine, there are two changes expected in the new
future once depsgraph copy on write is implemented:
1) To call ED_info_stats_clear a callback from depsgraph, instead of the
notifier system. (that would also allow us to clear only one
SceneLayer).
2) To store/get stats from the evaluated SceneLayer, as well as iterate
over the evaluated objects as well.
Revert 7a18ee62eb and 1ff97bbfff after discussing with @fclem.
VertexBuffer_size should always report the same buffer size, but without asking/calling OpenGL.
Deactivated by default.
All shading attribs can be packed to take less VRAM at the cost of precision (not noticable in this case).
UVs can be packed into I16 but that limits their positions into the [-1, +1] range.
This could be a setting option in the future.
Follow-up to 0722e41f9e which removed all uses of this struct. Gawain VertexFormat auto aligns attributes as described in @nicholasbishop's performance note.
Only mask are handled by sculpt mode engine and are multiplied on top of the render.
There is room for improvement:
- Shaded meshes don't have correct tangents or uvs.
- Masks are in range 0.8 - 0.2 thus always darkening at least 20% the render.
- It only uses the first material slot of the mesh.
Physics panels are not all back, and the material related panels (e.g.,
hair render panel) should go be changed since there should be no
material for those.
The original idea was to use Clay as the default. But since clay may not
even be in the final release, we can't afford to have a startup.blend
that doesn't deliver a reliable result regardless of build options.
Adds a version of template_ID that can be used for non-ID properties.
The property to search for and the collection to search in has to be
passed to it.
Like template_ID it also takes arguments to define a 'new' and 'unlink'
operator. They will be displayed as icon-only buttons then.
Also added a version that can display preview thumbnails.
Had to do some additional changes to make text-buttons support
displaying/modifying empty RNA properties.
This will be needed for workspaces, see D2451.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D2666
This removes a few options from CMake:
* WITH_LEGACY_OPENGL
* WITH_GL_PROFILE_COMPAT
* WITH_GL_PROFILE_CORE
We still have WITH_GL_PROFILE_ES20. So you can still alternate between
ES20 and CORE profile (when es20 is disabled).
If you want to explicitly see the stubs errors just define
WITH_LEGACY_OPENGL.
Nothing terribly exciting, just a hackish implementation of solid mode CDDM
drawing for cases when we are building with core profile.
The goal is to be able to see SOMETHING with new OpenGL for thew guys who
tests alembic and friends in blender2.8 branch. This is a temporary solution,
the whole drawing will be reworked. Limited to hardcoded material and lighting.
Selection outline color is also hardcoded because of lack of glColor() in the
core profile.
After this commit there is no big stoppers from stop worrying about legacy
OpenGL, so we can go core profile as the only way for Blender.
While some areas will become broken after that, we'd better just fix them
after that and for now just focus on more important design work.
We still need to update the RNA interface to access those. But since
there is no RNA_def_property_float_array_funcs I'm not sure how many
changes this will require.
A bit too early to disable workaround for particles.
Guess it was commented out after particles removal but was not brought back
after particles restore commit.
The issue was happening when display device is set to None, which makes it so
all the color transformation is a no-op which does not really require any LUT.
This is something we can not know from Blender side easily, because LUT sampling
and related logic is fully done in OCIO library itself. The following happens:
- OCIO sees that no LUT is needed and uses simple pass-through logic in the
color conversion function.
- GLSL compiles sees that uniform used for LUT is unused in the GLSL code and
strips it out.
We can not know this from Blender side because technically any conversion to
the same space might be a no-op and that we wouldn't know without some tricky
parse of the OCIO configuration.
So for now we simply avoid crash but are disabling checks for existence of the
uniform.
Ideally would be nice to have some GLSL-code parses which gets the uniforms
from the code itself, so we can distinguish between typo in the uniform name
and uniform being optimized out.
Would cause pointer to allocated memory to be overridden.
Steps to recreate were:
* Start Blender
* Save
* Open saved .blend
* Close Blender -> should report unfreed memory
This is routinely mis-used to continuously run scripts,
causing performance problems.
This should be replaced with more specific handlers, or possibly timers.
See: T47811
Caused by rBe87ddda149b. Selecting objects shouldn't be done in such a
low level function anyway (IMHO).
Made sure duplicating objects still works correctly.
This add a new set of (possible) render settings that can be defined at
the scene level and overridable at the scene layer level.
Once we get workspaces we can either add workspace inbetween scene and
scene layer evaluation. Or to replace layer settings, to avoid extra
confusion to users.
An example of this setting is "samples", as implemented now for the clay
engine.
Adds 2 static unsigned int to Gawain and GPUTexture to roughly keep track of the memory stats on the GPU.
Stats can be view at the bottom of the GPU stats with debug value > 20.
This join them with \n separators.(right now they clash on top of each
other).
Note: We still need to change "ED_region_info_draw" to accept multi-line strings.
Disabled by default. Set ENABLE_EFFECT_MOTION_BLUR to 1 to enable.
No fancy motion blur. Use depth and camera matrix to get the motion vectors. Then blur in this direction.
Only available in camera view.
Only Camera animation is supported, does not take into account the parents motion
This can be used by any engine actually. For example to give feedback
regarding probe caching in Eevee, ....
Unline master, we try to conciliate both the original viewport info
(FPS, view name) and the render info.
Note: I had to split the function in two because the camera alpha
passepartout is handled inside the view3d_draw_region_info function.
Review: Campbell Barton and Clement Foucault.
Thanks to Sergey Sharybin and Pablo Vazquez for some of the design
discussions.
This fix doesn't really fix the situaion now because at the moment we
only flush the evaluated flags at DEG_OBJECT_ITER time, which is silly.
But it's all we can do until we have CoW.
So the parent visibility flag is not flushed. And even if we flushed its
visibility flag, we would need to rely on having the parent flag flushed
before we get to the object in question.
Anyways, take this commit as a future fix for when depsgraph comes to
rescue all our souls.
This implements weight rendering with the draw manager, with all drawing
options (Shading, wire, face masking, vertex masking).
This is part of T51208
Reviewers: campbellbarton
Subscribers: dfelinto
Differential Revision: https://developer.blender.org/D2654
Note: We should test if the armature is the "armature modifier" parent of the
object.
If any good samaritan feels like tackling this, the function to change
is: DRW_pose_mode_armature
Since offscreen drawing now uses draw engine, this doesn't need to be
considered legacy.
Note that there are some calls into view3d_draw_legacy.c from view3d_draw.c
this is generally not accepted, so its only dont where there are checks
for new/old engine.
Functions exposed to do this use a VP_deprecated prefix.
We still need to bring pose bone drawing for the pose engine.
Note: In the future, once we get face-widget selection, we will need to
make sure the pose engien only draws then if "weight paint mode" is not
enabled too.
In the future this will allow us to implement things like face manipulators.
For now however, this is getting on the way of using pose mode
(mesh objects are drawn green).
NOTE: pose engine should also be the one taking care of pose bones
(and for that matter, X-Ray armature option should/could be a property
of the Pose engine even).
8b2640f08 introduced the error,
caused by external-engine needing depth mask to be disabled,
which happened to be the case before changing state changing logic.
With this we also do not need IDP_MergeGroupValues anymore.
If this causes problems in the future we can always make recursion an
option (like overwrite is).
Most of this was copying/adapting code from octahedral existing draw
code, tough part was to get BBone matrices to behave as expected, they
are using a fairly specific setup...
Addresses T51365 and T51362.
Changing states didn't properly reset between shading groups
causing the GL state to be wrong based on draw order.
States are now only set when changed.
We can now use object and other modes on top of Cycles.
Since we are now always on "render_to_view" (old Rendered mode), the
pause button is always visible.
Note: In one case (rna_Scene_editmesh_select_mode_set) I had to resort
to the temporary solution of BKE_scene_layer_context_active.
This is fine for now, but it will be a problem once workspaces are
introduced. In this case the fix is to use a temporary value in the set
routine, and actually only set the active object in the update function
(which can take bContext).
- code_generate_fragment : Making sure that shaders uses the new uniforms.
- code_generate_vertex_new : create require attribute based on their names and not their id (see draw_cache_impl_mesh.c).
- add support for ramp textures.
This is a bad implementation waiting for some improvement that are :
- Gawain support for multiple names. -> will remove duplication of attribute alloc
- Glsl safe name string escaping. -> will remove any risk of hash colision.
Old glsl drawing was relying on attribute being choosen by DerivedMesh at drawing time.
For this reason, we declare all possible attrib "name" for each data layer inside the batches.
In the glsl code, we declare required data by type and name.
Then Gawain only bind vbos if names correspond.
This is way cleaner as we do not need to access the CD itself when drawing.
One other problem is that the hash maybe 11 caracters long and rapidly overload gawain's attrib name buffer.
- Unify GPUMaterial creation (world/mesh).
- Support for multiple shader variations (not used for now).
- Convert GPUInputs to DRWUniforms to be used with the draw manager.
- Nodetree Update is not supported. The only way to refresh the shaders is to change render engine.
- Cleanup in GPUPass.
- Add new temporary Node Compatibility type. Compatibility types should be removed in the future.
Note that smooth-shaded outlines of muted NLA strips should also be
dashed, not sure how to do that currently (in a simple way), so kept
them solid for now.
Using geometry shader allows us to get rid of the 'line origin' extra
vertex attribute, which means dashed shader no longer requires fiddling
with those vertex attributes definition, and, most importantly, does not
require anymore special drawing code!
As you can see, this makes code much simpler, and much less verbose,
especially in complex cases.
In addition, changed how dashes are handled, to have two 'modes', a
simple one with single color (using default "color" uniform name), and a
more advanced one allowing more complex and multi-color patterns.
Note that since GLSL 1.2 does not support geometry shaders, a hack was
added for now (which gives solid lines, but at least does not make
Blender crash).
There was a bug in older GLEW version which kept glGenVertexArrays as NULL
when 3.2 core context is requested [1].
Didn't find a way to check GLEW version from CMake, it seems the version
is not really exposed to the header.
[1] https://sourceforge.net/p/glew/bugs/124/
Needed a bit of twisting in generic private func behind the imm_draw_circle
helpers, but think it's fine.
Note that this demonstrate yet another downside of new dashed shader
compared to olde line style: not only does it needs more complex setup,
and can only work with PRIM_LINES type of primitives, but it also
behaves totally wrong with chained short segments!
We really need to find a better way to do this effect at some point. :(
Also restore drawing of local action markers in NLA strips...
Note: there is another usage of setlinestyle in this file, not sure how
to hanlde it for now, so will leave it for later...
This upgrade the drawing code to use latest opengl calls.
Also, it adds a fallback shader for opencolorio.
Reviewers: sergey, brecht
Subscribers: merwin, fclem
Differential Revision: https://developer.blender.org/D2652
This one has been painful, it's doing lots of nifty conditional drawing
of all kind... Also, very nice illustration of how cumbersome it is to
use dashed shader currently, we really need to find a simpler way at
some point imho. But this is not critical issue either, for now we can
live with some uglyness like that. :/
- enabled lights
- alpha test
- texture environment
- point sprites (always enabled in modern GL)
Moved is_clip_plane for better struct packing, no functional change there.
Part of T51164
These parts will not be part of final viewport, but are called indirectly during the transition. To avoid runtime errors on core profile, exit early -- functions effectively do nothing.
I put the early exits inside the functions to avoid cluttering the code that calls these. But (long term) the calling functions need to change.
Basic shader's detect_options function was unused and full of old, so I deleted it.
Part of T51164
GL_LOGIC_OP is a synonym for GL_INDEX_LOGIC_OP, from OpenGL 1.0's indexed color drawing. It's not part of modern GL and causes an error in core profile.
GL_COLOR_LOGIC_OP is still supported in the latest GL. It's the last stage before writing to the framebuffer.
Part of T51164
There are multiple ways to orphan a buffer resource, and this code picks the oldest/safest way no matter which OpenGL version we're running.
TODO: use other (more recent) methods after thorough testing
Follow up to 8e0c57a812
Texturing is always enabled in GLSL. Simply use a sampler in the shader.
Replaced gpu_generate_mipmap with glGenerateMipmap since the former just Enabled/Disabled the texture target and called the latter.
Part of T51164
Note that I also made 'dash anchor point' consistent (the static one,
not the mouse one), in previous code somtimes dashed were anchored to
the static center point, in others, to the moving mouse position, the
later was rather disturbing imho...
Previously canceling a render done by the split kernel could cause artifacts
such as very bright or dark tiles. This was caused by unfinished samples
being included in the output buffer. To avoid this we now wait till all the
currently rendering samples have finished, up to a limit of twice the
expected time for them to finish (currently this is no more than 20 seconds,
but usually its much less). If samples still haven't finished by then we
stop anyways in case there's an endless loop occurring.
The scale version was working(ish), but it was not really extendable to
a 3D line version of the shader.
Also note that sequencer view still keeps its 'UI scale' adaptation
(dashes grow together with UI scale setting). Would be nice to do that
everywhere ultimately imho, but nothing urgent here.
Not much to add here, except that it needs the scale of its MVP matrix
to be taken into account here...
Reviewers: merwin, dfelinto
Differential Revision: https://developer.blender.org/D2647
Use new 2D dashed line shader in 3DView camera view.
Note that this also involved converting UI_draw_safe_areas() to this
dashed shader, which means it cannot be used anymore with other shaders.
Part of D2647.
Even though in some cases this does not seems useful, in others (like
zommed 2D views) we have to correct MVP matrix scaling to get fixed
dashes size.
Note that we could do that differently (commented about it in shader),
would also have been cleaner to extract that MVP scale from within the
shader, but there does not seem to be a way to initialize uniform values
from within a shader, and would rather avoid recomputing the scale for
every run (especially since 3DViewport does not need it e.g.).
Part of D2647.
That still not ideal, but so be it. IS_VIEWPORT_LEGACY should be
removed anyways, this is code from pre-draw manager and the
"modern viewport" as well as legacy will go away entirely once the draw
manager is feature complete.
Selection code needs to iterate over DEG_OBJECT_ITER otherwise we won't
get modifiers, dupli objects, ...
Also make selection respect selectability flag.
Review by: Sergey Sharybin
- use DRW_engine prefix for engine types.
- use engine suffix for files that define a draw engine.
- remove engines from include path (they're only referenced once)
- Use uniform color world for the world probe.
- Refactored the Fresnel expression to be better with Area Lights.
- Squared the roughness for default materials.
Needed to remove old draw code entirely.
Object mode selection support, pose and armature still need to be added.
Enabled when 'use_modern_viewport' is set.
- Added New Batch cache routine to get the split mesh for each material. (optimization needed)
- Did some shader modifications to create default_frag and support a somwhat correct fresnel for lamps (to finish)
Otherwise if we create a new collection, and drag a collection into it we either
get a crash, or at the very least we dont get the visibility flags correct.
This is part of the new draw manager design. Any engine (even clay, eevee, ...) should be able to draw to the viewport, as well as render to an image directly.
Changing the API names to conform to that.
Now we just iterate over all objects. It may be a better idea to use a
smarter approach for performance. However, since this function is not
called regularly (only when changing Alembic file paths), it's not a very
big deal.
Was performing context access per object for scene, region etc.
While not very slow they don't change during drawing so cache in a struct.
This also makes it possible to draw in views besides the current context.
Compatibility profile was working fine, this is mostly to get the highest GL core profile version available.
Our minimum requirement is 3.3 core profile. When we request a specific GL version:
- AMD and Intel give us exactly this version
- NVIDIA gives at least this version <-- desired behavior
so we ask for 4.5, 4.4 ... 3.3 in descending order to get the best version on the user's system.
Accept OpenGL 3.0 on Mesa instead of 3.3+ compatibility profile. (requested by @LazyDodo) This will be removed after we finish moving to core profile.
Part of T49012 and T51164
Blender subsystems that care about OpenGL use GL_DEFINITIONS, which now includes the newest (temporary) WITH_LEGACY_OPENGL.
Also updated Gawain's CMake to use this instead of its own logic.
MX (Multiple conteXt) support was dropped from the GLEW 2.0 library to make core profile support cleaner.
Our WITH_GLEW_MX build option was OFF by default already; this commit removes the inactive code paths.
I'm working on a plan for multiple GPUs, contexts, resource sharing, etc. This commit gives us a cleaner starting point for that upcoming work.
Tested on Mac, will test on Linux & Windows immediately after pushing.
This was blocking core context setup on Mac, since accumulation buffers are obsolete. With this (and appropriate CMake options) I now get
renderer: 'Intel HD Graphics 4000 OpenGL Engine'
vendor: 'Intel Inc.'
version: '4.1 INTEL-10.24.45'
in system-info.txt intead of
version: '2.1 INTEL-10.24.45'
The original code was failing because the base to object flushing was
only happening as part of the depsgraph. However we can use the
evaluated values to set the initial values of the base.
In this particular case, we couldn't set the new object visible because
its selectability flag was not set yet.
We were not updating depsgraph when collection just "became" selectable,
but although this doesn't change object selection, it change its
selectability.
Pending: Include the set in the rna depsgraph.objects
In fact it would be nice to unify them both. However this will likely
change once Depsgraph incorporate this iterator, so I'm not sure we
should bother with that.
Related to T51203
Iterator to return the objects evaluated from depsgraph. The
iterator itself will change once CoW is implemented.
This reproduces the behaviour of DEG_OBJECT_ITER but for Python.
Even though this will have to change once we get workspaces, we will
still have a depsgraph for the Scene.
This is required for the upcoming depsgraph.objects RNA iterator.
Example, imagine an object Cube in collections 1 and 2 where both
collections are nested to A. Now we set a "color" property as follow:
```
Scene -> GREEN
--
A -> RED
↳ 1 -> BLUE
↳ 2 -> -
```
In this case the object will be RED, because of A↳ 2.
Now if we have:
```
Scene -> GREEN
--
A -> RED
↳ 1 -> -
↳ 2 -> PINK
1 -> -
--
The object will be PINK because of A↳ 2.
Note that the (top level) collection 1 doesn't influence the object color
because there are no overrides on it. The scene render settings (GREEN
in this case) are only used as fallback if an override is not set at
all.
Immediate mode built-in shader is used for this drawing already.
So there is no reason to try building basic shader which is not
supported in the core profile.
This replaces all direct usage of:
- FIRSTBASE
- LASTBASE
- BASACT
- OBACT
Some usages still remain in legacy utility functions which are called
all over the place.
With the explicit calls we don't need to worry about current state
outside of the GPU module now. In fact. we don't need to worry about
current matrix mode in core profile at all.
Legacy OpenGL now has some code which ensures current matrix mode
when using explicit calls to push/pop matrix.
There is no need to break assumptions of what's being modified
by this call and what's restored. The changes in this function
simply spread crappyness outside of the UI block.
There are two major things in this commit.
First one is to have proper stack for projection matrices. This is
something what OpenGL specification grants to have at least 2 elements
for and what is required to have for proper editor drawing without
refactoring the way how we restore projection matrix.
Supporting this stack have following advantages:
- Our GPU stack is closer to OpenGL specs, making it easier to follow
by other developers who are always familiar with OpenGL.
- Makes it easier to port all editors to a new API.
- Should help us getting rid of extra matrix push/pop added in
various commits to 2.8 branch.
The new API follows the following convention:
- gpuPushMatrix/gpuPopMatrix ALWAYS deals with model view matrix
and nothing more.
While this name does not fully indicate that it's only model view
matrix operator, it matches behavior of other matrix operations
such as transform which also doesn't indicate what matrix type
they are operating on.
- Projection matrix has dedicated calls for push/pop which are
gpuPushProjectionMatrix/gpuPopProjectionMatrix.
There is only two places which are using texture matrix mode:
- Tiled tface support.
- Texture shading mode for texture mapping.
Both cases are subject for reconsideration: it is likely that we'll be getting
rid of tface, which means game properties like tiles needs to be revisited
anyway. As for texture shading it is using basic shader which is also not
supported by core profile anyway.
It is required for our new matrix stack to only have projection and model view
matrix modes. This commit ports paint cursor overlay to model view matrix.
This is an OpenGL 3.3 feature, currently being used for surface normals. It's 1/3 the size of floating point triples and perfect for normals or colors.
See T49012 for why Windows can use this feature regardless of core vs compatibility.
This combines the Mesa fix (16e929e6ff by @brita_) with the Mac fix (89e23c743e by @merwin).
And uses the same fix for another call to glFramebufferTexture introduced in f1fb605ec9.
The issue was going to the fact that GL_ALPHA was deprecated in core profile
and common solution online is to use GL_RED instead. That is what is done in
this commit.
Those tokens are still valid. Although we should not being using them,
they should not prevent us from building with core profile.
In the future we can have a new flag WITH_GL_CORE_STRICT for those.
But only after we build with core profile by default
Object Info node can be useful to give some variation to a single material assigned to multiple instances. This patch adds support for Viewport and BI.
{F499530}
Example: {F499528}
Reviewers: merwin, brecht, dfelinto
Reviewed By: brecht
Subscribers: duarteframos, fclem, homyachetser, Evgeny_Rodygin, AlexKowel, yurikovelenov
Differential Revision: https://developer.blender.org/D2425
This replaces access to the first scene layer (which was wrong) with a linear
lookup of scene layer by it's active index.
This seems to be a better temporary solution to have things working for until
we've got proper workspace, depsgraph and it's per-layer storage in place.
For now only compute GGX convolution. The GGX LUT used for the split sum approximation (UE4) is merged with the LTX mag LUT that uses the same parameters (theta and roughness)
First: we settle on core profile 3.3, not 4.1. Second, GL_CURRENT_PROGRAM still exists in 4.1 and 4.2. But it is recommented to use GL_ACTIVE_PROGRAM instead.
Following the logic of gl-deprecated.h we should define it to USE_GL_ACTIVE_PROGRAM instead. That said, removing it for now.
glFramebufferTexture() is only available from OGL 3.2, it is also not part of the ARB_framebuffer_object extension.
I don't know if there is a better way to check for mesa drivers or if using the 2D version will have issues with f2f16a256, but so far I had no problems
Follow-up to 3bc6b831d8
Initial code was getting the number of ShaderInterfaces that could fit between two pointers (which makes no sense). I really meant number of bytes.
Surprised it worked on Mac, glad I tested on Windows before bed :D
ShaderInterface stores names of custom uniforms and all attributes in an internal buffer, but it doesn't know how large to make this buffer until all inputs are scanned.
This commit shrinks the buffer to the exact size needed.
ShaderInterface_uniform searches custom uniforms first, then builtin uniforms if needed.
This reduces the amount of string matching since you're almost certainly looking for one of those custom uniforms. Otherwise you would've called ShaderInterface_**builtin**_uniform.
- test for 2D textures first since it's the most common case
- declare variables close to where they're used
- fix compiler warning for proxy (uninitialized use)
- safe return if n != 1, 2, 3 (should never happen)
- white space
The fragment shader expects a normal, but the vertex shader was not providing one.
Fix: added a new vertex shader that has normals + smooth color interpolation.
I also split gpu_shader_3D_vert in two:
- one with just position
- one with position + normal
For each of the builtin shaders, we should be able to look at the GLSL and tell exactly what it's doing. Using #defines and #ifdefs for rendering options makes the shaders hard to read and easy to break.
The specialized color functions are better in every way:
- faster lookup (don't have to match "color" string)
- flexible inputs (RGB with separate alpha)
- automatic alpha = 1.0 if not specified
Sort of related to T49043
attrib_binding.c uses NULL, so include stddef.
Also swapped stdlib for stddef in vertex_format.c, since it only needs NULL.
Not sure why MSVC 2017 and clang/Mac work without this...
Thanks to @youle for reporting!
This eliminates tons of glGetAttribLocation calls from the drawing loop. Vast majority of code can keep making the same function calls. They're just faster now!
- remove 2D-specific variants of BuiltinUniform enum
- rename remaining builtins to exclude "_3D" since they can be used by 2D or 3D shaders
Follow up to D2626
See GPU_matrix.h & gpu_matrix.c for the important changes. Other files are mostly just updated to use the latest API.
- remove unused functions, defines, enums, comments
- remove "3D" from function names
- init to Identity transform (otherwise empty stack)
- gpuMatrixReset lets outside code return to initial state
Part of T49450
Follow up to D2626 and 49fc9cff3b
* Brings us closer to core profile, all matrices are working, and apart
from a problem with text drawing, Blender is working fine.
* Reduce the coding overhead of having to setup/teardown when
alternating between 2D and 3D drawing sessions.
* Gives us fewer modes and states we need to keep track of.
Unfortunatelly this also "rejects a fundamental change" the original
design was trying to make - that 2D is different from 3D and
deserves its own best implementation.
That said, it is still aligned with the function API design as
originally implemented (i.e., it still uses gpuTranslate2D, ...).
Finally, if you build with core profile and this patch you get:
https://developer.blender.org/F545352
[The text glitch is an unrelated issue].
Reviewers: merwin, sergey, brecht
Differential Revision: https://developer.blender.org/D2626
On Apple we use OpenGL 2.1 + an ARB extension for framebuffers.
The glFramebufferTexture function is part of OpenGL 3.0 but not part of the ARB extension. This commit fills that gap.
All other platforms are using GL 3.0+ already so it's not an issue there. All platforms (Mac too) will use GL 3.3+ soon so this workaround will be removed.
These were the last few glGetUniformLocation calls in source/blender.
The new system gets uniform information once when a shader is created, then uses this cached info every time after that.
This removes glGetBooleanv queries for GL_LIGHTING. This has been #ifdef'd
out with legacy opengl disabled. Thus a false positive still shows up in
the gl queries. Also, note that this removes support for wireframes in
opensubdiv, when desabling legacy opengl, which should be fixed later.
Part of T49043
Some elbeem debug functions had old gl drawing calls. I removed the
functions instead of converting, because Blender doesn't even build
with them enabled anymore, because some elbeem debug libs got removed
at some point.
Part of T49043
... even though 3x3 feels better.
This is a compromise to get core profile up & running sooner. Eventually I'd like to finish the original 3x3 plans, but this commit will let us get on with other tasks.
External API stays (almost) the same. Our GLSL shaders can use this without any changes.
Part of T49450 and T51164
These functions mark the beginning and end of 3D drawing, causing the matrix API to use our own implementation instead of legacy OpenGL.
Part of T49450
Look up "name[0]" when asked for "name", since that marks the beginning of the array.
We're comparing to the name stored in ShaderInterface which comes from glGetActiveUniform.
This eliminates tons of glGetUniformLocation calls from the drawing loop. Vast majority of code can keep making the same function calls. They're just faster now!
- Batch_Uniform*
- immUniform*
- gpuBindMatrices
- and others
- builtin uniforms match what Blender needs
- set input counts in struct (stupid mistake)
- look up uniforms by name
- look up builtin uniforms by enum
- check attrib/uniform locations for error
Same as MEM_SAFE_FREE macro,
checks for NULL, runs free then sets NULL.
Blocks of code that do this many times are noisy and likely
errors here wouldn't be noticed immediately.
Also NULL's static vars which were being left set.
Problem was an edge case where vertex_ct logic and draw logic disagreed on how many dividers to draw.
Fix: copy draw logic to earlier vertex_ct
I also skip any drawing or setup if vertex_ct = 0, and set color attribute only for each line's provoking vertex. Small optimizations but these things add up.
This removes MAX_STORAGE, MAX_BUFFERS, MAX_TEXTURES, MAX_PASSES limits.
Actual memory saving isn't so important, it just means we don't need to
manually bump these based on changes to engines.
The issue was caused here by usage of deprecated GL_CURRENT_PROGRAM
which was returning rubbish value.
Now we use imm API and create vertex format prior to immBindProgram.
This made us required to have some sort of state passed from setup
function to actual drawing.
Note: I’d assume gawain equivalent to glDrawArrays would be batches? But
for two lines drawn twice this looks totally overkill anyway, so
switched back to basic immediate-mode-like API.
A bit frustrating to work on this code, since afaict you cannot check
the results in Blender, being mostly unused currently...
This was slightly less obvious, especially particle billboard drawing.
That one now requires 1.5 times more space in VBOs and ParticleDrawData
buffers, since we have to draw two triangles per particle, instead of a
single quad... And diagonal of each quad is now drawn in wire mode, not
sure how much we consider this an issue (as in, will this particle draw
code change a lot in future?).
From quick check on the web seems there is no other way to do anyway. :/
Using Texture Arrays to store shadow maps so less texture slots are used when shading. This means a large amount of shadows can be supported.
Support Projection Shadow Map for sun like in old BI/BGE.
Support Cube Shadow Map for Point/Spot/Area lights. the benefit of using it for spot light is that the spot angle does not change shadow resolution (at the cost of more memory used). The implementation of the cubemap sampling is targeted for 3.3 core. We rely on 2D texture arrays to store cubemaps faces and sample the right one manualy. Significant performance improvement can be done using Cubemap Arrays on supported hardware.
Shadows are only hardware filtered. Prefiltered shadows and settings comming next.
This is an auto-generated list, crossing gl-deprecated.h, glew.h and the
Blender code. It allows Blender to build with core profile.
WITH_OPENGL_LEGACY=ON: nothing changes
WITH_OPENGL_LEGACY=OFF and WITH_GL_PROFILE_CORE=OFF:
It stubs deprecated legacy calls.
WITH_OPENGL_LEGACY=OFF and WITH_GL_PROFILE_CORE=ON:
It stubs deprecated legacy calls thus allowing Blender to build with
core profile only.
Technically you only want to use WITH_OPENGL_LEGACY=OFF when
WITH_GL_PROFILE_CORE=ON. But it doesn't hurt to have it working for both
scenarios.
Reviewed by: merwin
Differential Revision: https://developer.blender.org/D2610
See gpu_shader.c for the main changes.
EXT_geometry_shader4 brought this feature to GL versions < 3.2, but now it's just cluttering up our code.
Soon all platforms will be on version 3.3 so we won't even have to check support at runtime!
Callers now have to use Gawain's PRIM enum to specify geometric primitives.
This makes the API more bullet-proof (at least less vulnerable) since GLenum covers waaay more than GL_POINTS, GL_LINES, etc.
Also prepares us for Vulkan.
Callers now have to use Gawain's COMP enum to specify vertex attributes.
This makes the API more bullet-proof (at least less vulnerable) since GLenum covers waaay more than component types.
Also prepares us for Vulkan.
Single quads are drawn as a TRIANGLE_FAN, with 4 verts in the same order.
Multiple quads now use PRIM_QUADS_XXX and will need further work. Only 8 places still use this.
Part of T49043
Quads are not part of modern GL or Vulkan, so we should avoid them. XXX makes coders think "hmm how could I draw this without using quads?"
Quads will be removed during the transition to core profile.
Part of T49043
We concatenate #defines and #extensions into these, and can count the max string lengths needed. 256 is enough to hold today's strings; we can adjust later if needed.
When WITH_LEGACY_OPENGL = OFF.
This is our final target for Blender 2.8, all previous versions will be dropped in the future. GLSL 3.3 is richer so we don't require as many extensions.
Original code from @Severin with changes from @dfelinto & @hypersomniac.
This doesn't cause many functional changes
besides using new transform manipulators.
Submitted as D2604
This fixes T51143.
gl_ClipDistance is part of GLSL version 1.3 but Mac is stuck on 1.2 for now.
This workaround uses GPU_SHADER_3D_UNIFORM_COLOR for the entire rotation widget, ignoring any clipping plane. The CLIPPING shader only works on GLSL 1.3+ so I removed its 1.2 cruft.
A legacy implementation using gl_ClipVertex might be possible, but is not worth the effort. This problem (and workaround) goes away when all platforms move to 3.3 core profile.
changes:
- exact vertex count
- take bool (filled vs outline) instead of GLenum
This function has some flexibility that is not currently used. I left that in.
Each function takes a bool (filled vs outline) and a color. We already had multiple ways of passing color in; these are still here. Special variant for anti-aliasing.
- took GLenum out of interface
- removed UI_RB_ALPHA flag (only one place really used it)
- use exact vertex count
- removed redundant state changes (BLEND, LINE_SMOOTH)
This introduces a new CMake option - WITH_LEGACY_OPENGL. Without this option
things may not draw perfectly, however, we should soon be able to build with
OpenGL core profile.
The matrix-related api calls are (still) not handled here (glTranslate, ...).
There seems to be no consensus on whether to make this build option the
default. We can talk about this later. For now two things are the
priority:
(1) To get rid of deprecated calls when WITH_LEGACY_OPENGL is ON
(2) To make core profile work for Mesa/Mac when WITH_LEGACY_OPENGL is OFF
Reviewers: merwin, sergey, campbellbarton
Differential Revision: https://developer.blender.org/D2603
Many thanks for Sergey Sharybin for the help.
See intern/gawain for the API change. Other files are updated to use the new name. Also updated every call site to the recommended style:
unsigned int foo = VertexFormat_add_attrib(format, "foo", COMP_ ... )
Reference document: http://docs.gl/gl3/glPushAttrib
This patch only tackles the bits that are set by Blender with the
following exceptions:
1) Deprecated states (e.g., GL_STIPPLE) are not saved/restored
2) The exception being GL_ALPHA_TEST, which will be removed, but it may
affect drawing too much now. To be removed once we no longer set GL_ALPHA_TEST
elsewhere.
3) paint_cursor will be tackled separated, since it was abusing
glPush/PopAttrib in the first place.
4) Despite what the glPushAttrib page above may suggest, GL_DEPTH_WRITEMASK needs glGet, not glIsEnabled
5) BGE is still a problem since it relies on GL_ALL_ATTRIB_BITS which
would lead to a way more complete/lenghty solution. Since the BGE has
other (OpenGL deprecated) problems anyways, it can be handled on its own
time.
Finally, the original design for 2.8 was to implement a proper stack
system. However we need to move to core profile sooner than later. So
this is a pragmatic temporary (that may be permanent) solution.
Reviewers: merwin, campbellbarton
Differential Revision: https://developer.blender.org/D2600
These bits became obsolete with the new layer system, so we can
simplify some code around them or avoid existing workarounds which
were trying to keep things working for them.
There are still work needed to be done for on_visible_change to
avoid unnecessary updates, but that can also happen later.
Core of the issue was that some of our Theme colors are RGB-only, but
were loaded as RGBA.
Note that tracking all possible cases is pretty impossible, so we'll
have to tackle those as they get reported am afraid.
- use 'imm_draw_' prefix for functions that draw.
- use '_3d' suffix for 3d functions, no suffix for 2d functions.
- use terms fill/wire (shorter than filled / lined).
Also add `imm_draw_circle_fill_3d` (only had wire version)
Added new shader for clipping, also cleaned up rotation manipulator
drawing code a bit.
This code should be replaced by new transform manipulators soon, just
keeping this working in the meanwhile.
I started cleaning up UI_view2d_scale_get where the y scale was unused, then got carried away...
- for loop scope
- declare variables closer to where they are used
- move early exits closer to function start
- unsigned --> unsigned int
Fixed a few issues
- wrong transform matrices
- assert on node with no sockets
- color of collapsed nodes, some title areas
Also includes minor cleanup.
Objects that were using the same lamp data were having the same display matrices.
This is fixed by allowing engine to store a memory block inside the object itself.
Using Linear Transform Cosines to compute area lighting. This is far more accurate than other techniques but also slower.
We use rotating quad to mimic sphere area light. For a better approximation, we use a rotating octogon.
This moves selectability/visibility flag flush from some hardcoded
places in the code to depsgraph. This way it is possible to simply
tag depsgraph to update those flags and rest it'll do on its own.
Using depsgraph for such flush is an overkill: those flags are fully
static and can not be animated, so it doesn't really make sense to
hook only those to depsgraph.
However, in the future we will have overrides on collections, which
ideally would need to be animatable and drivable and easiest way
to support this is to do this on depsgraph level, so it ensures
proper order of evaluation for animation and drivers. And it seems
logical to do both overrides and flags flush from depsgraph from
this point of view.
This commit also includes the evaluation of IDProperty for collections,
which basically are just another form of override. So once we implement
the other kind of overrides the flushing and collection evaluation won't
change.
Patch by Sergey Sharybin and Dalai Felinto
This should have been done earlier. But now that we may see more activity in master due to bcon3 merges, it is even more important to stress out the separation between master and 2.8.
Also I needed the version bump for idproperties doversion (they needed
to happen in _after_linking, and we don't have access to
DNA_struct_elem_find there).
Last but not least, every time I posted a video or image from 2.80, I
got someone confused about the version showing in the infobar.
First this replace a custom data struct with IDProperty, and use
IDProperty group merge and copying functions. Which means that a collection
property setting is only created if necessary.
This implements the "Layer Collection settings" override system, as
suggested in the "Override Manifesto" document.
The core is working, with Scene, LayerCollection and Object using a
single IDProperty to store all the render settings data. Next step is to
migrate this to depsgraph.
Note: Clay engine "ssao_samples" was hardcoded to 32 for now. It will come
back as part of "Workspace Settings" later.
Many thanks for Bastien Montagne for the help with the UI template
nightmare ;)
Differential Revision: https://developer.blender.org/D2563
GPU_framebuffer no longer handles transform matrices, which this code was relying on. Made screen_preview_draw responsible for its own ModelView matrix.
This restores the feature for legacy viewport only. Modern viewport, Clay, Eevee, etc. will need further work.
Eventually we should rename this something other than "OpenGL".
I was hoping this would fix the issue of the object not moving after you copy it (right now you need to manually grab the object afterwards). But unfortunatelly it does not
rB870440dee910c9 just did NULL-check for Main pointer, actual issue is
that bContext pointer was NULL. This can be fixed by ensuring
PROP_ENUM_NO_CONTEXT flag is not set by calling
WM_operator_properties_sanitize when creating RNA buttons. Now, layout
previews are visible in keymap editor too.
Client vertex array state is deprecated, and these are the default values anyway.
No need to bind any basic shader. Let drawing code decide which shader it wants to use.
Part of T49165 (general OpenGL upgrade)
- use in/out instead of attribute/varying
- use named output instead of gl_FragColor
- use texture() instead of the multitude of older texture sampling functions
The #if __VERSION__ == 120 paths (needed on Mac) will be removed after we switch to 3.3 core profile.
Part of T49165 (general OpenGL upgrade)
This change looks small, but it switches the entire 3D viewport from legacy OpenGL functions to our own code.
Kept non-modern viewport on legacy path so we can compare easily (via the Modern Viewport checkbox).
Part of T49450
Builtin names staring with gl_ will not be available in core profile. Same with the ftransform function. New matrix API provides the same names minus the gl_ prefix.
Part of T49450
- init projection matrices with identity
- fix copy/paste mistake in GetProjectionMatrix3D
- add extra matrices needed by material GLSL
Working toward T49450
New matrix API does not support texture matrices. Not sure what the final code will look like, but this at least avoids interference with new ModelView matrix.
Marked each line with TEXTURE so they can be disregarded during searches.
Related to T49450
Removed infinite details and went for decreasing details with the distance instead (like the axis aligned ortho view auto sized grid).
Separate drawing of the Z axis into 2 pass (using shading group) to render ordered transparency with the main grid pass.
Take advantage of 2D functions, rotation about the X Y or Z axis, uniform scale factors.
We no longer need to call gpuMatrixBegin_legacy() before using the new API locally in functions.
related to T49450
Mass replacing the common code of all tests
```
echo "Fixing $1"
ed "$1" <<'EOF'
1,/Testing/d
i
from render_layer_common import *
import unittest
import os
import sys
sys.path.append(os.path.dirname(__file__))
.
w
q
EOF
```
Using line-width of 120
Pretty sure source/blender is now finished, with all legacy matrix calls confined to gpu_matrix.c.
This was the easy part, but doing it first makes the next part much easier. TODO and XXX notes describe what is left.
glMatrixMode is still in place, since the new API does not share this concept of modes. Similar for glOrtho and glFrustum which I'll tackle very soon.
Part of T49450
For functions that expect a 4x4 matrix, you can pass in that, or array[16], or float*, or... Casting at each call site can get annoying, and obscures the logic.
The C11 section still needs work, but the non-C11 macros help on the system I tested on (Mac/clang).
Part of T49450
This is used to send latest matrix values to shader when drawing.
Previously handled by calling OpenGL matrix functions, followed by gpuMatrixUpdate_legacy. With this change that function is no longer needed.
Part of T49450
For the sake of forward progress on T49450
We can now replace legacy gl* matrix function calls with their gpu equivalents. "Inactive" in this code means we're using the legacy matrix stacks, not our own. Setting up the proper gpuMatrixBegin2D/3D/End calls can be done afterward.
Most or all of this will be removed after the transition to core profile.
We render selected meshes into another buffer and use a screen space shader to expand the color out of the mesh silouhette.
Pros: only one additionnal render pass is needed (like old outline code), and we have occluded informations.
Cons: memory usage is a problem. This method needs 2 color buffer to ping pong when expanding the outline and 1 depth buffer to test occluded fragments. This gives a 88 bits/pix memory footprint.
Idea: Since we don't need all color range but only some uniform colors (theme colors) we could manipulate only the color ID instead of the whole color this could cut the color buffer size and lower the memory footprint to 58 bits/pix.
It also adds nice occluded silouhette information for selected objects that are behind visible objects.
This methods is really heavy because it needs to render the wires twices.
This attempt at TLS was leftover from an earlier prototype. It never worked with Blender's build system, and was defined to just exist, not to actually do anything.
NOTE: This is really a backend-only implementation, nothing is changed in the UI
Adds a tab button-type and the basic drawing and handling code for it.
More work needs to be done on it, but idea is to get in ready for usage in the
topbar.
Differential Revision: https://developer.blender.org/D1371
Before now it lived in source/blender/gpu for convenience. Only a few files in the gpu module use Gawain directly.
Tested on Mac, time to push and test on Windows.
Todo: some CMake magic to make it easy to
#include "gawain/some_header.h"
from any C or H file. Main problem here is the many editors that include GPU_immediate.h which includes Gawain's immediate.h -- is there a way to avoid changing every editor's CMakeLists?
Now that we're almost done with T49043, let's run immediate mode at full speed. Debug builds will still do strict checks.
Developers should still test their changes before committing! Recommended:
$ make debug (or make lite debug)
$ blender --debug-gpu
We concluded this is going to be the display mode users will need to work
with the most, so makes sense to make it the default one.
Also, if the opened file only has one collection in the active render
layer, we expand it (almost empty list would be misleading).
What I had to do to make the expanding work is a bit ugly, but didn't
find a better way. During do_version we don't have access to the
TreeElement instances, and including ED_outliner.h to share code here
should be avoided too.
GL_SELECT is really slow in this branch and will be removed.
For now we simply change AUTO behavior to avoid possible conflicts with merges
and upcoming color-id-based selection.
Talked with Pablo Vazquez (venomgfx) and Julian Eisel (Severin), and we came up with this solution instead.
Basically, if the file has only one layer, it is converted to a collection named "Default Collection". Otherwise we name the collections: "Collection 1 [converted from 2.75]"
Just do early output and don't bother with any GLSL program bind when
there is not enough points of lasso to draw.
This could have happened at the very beginning of the stroke.
So we can store (for example) vertex positions in one buffer and normals + colors in another buffer. Not super exciting right now, but very useful once we start changing some attribute values.
Supports future work by Clément et al. Only tested with one VBO per Batch since that's all our current code uses.
glMaterial
glColorMaterial
glPixelTransfer
and glEnable/Disable for
GL_FOG, GL_LIGHTING, GL_COLOR_MATERIAL
All of these were just setting default values, so I don't expect any visible change.
Part of T49165 (general OpenGL upgrade)
GPU_viewport_bind & unbind should be called as pairs. A recent commit -- 3b91989a09 -- called unbind only for some code paths, overflowing OpenGL's matrix & attrib stacks.
These are from the ARB_vertex_type_2_10_10_10_rev extension that became part of OpenGL 3.3.
So they are new, but only exist for compatibility with immediate mode, which is old.
Related to T49165 (general OpenGL upgrade)
A user doesn't want to necessarily create a new Screen only because she
wants a new window.
This patch allows the user to pick the screen to use for the new Window.
If the screen picked is the active one, it duplicates it (as the old
behaviour in Blender).
Patch with contributions and fixes by Julian Eisel (Severin)
Subscribers: venomgfx
Differential Revision: https://developer.blender.org/D2555
Turned out to be a quite easy fix. I thought the issue was that we
couldn't identify the TreeStoreElem when (re)creating its TreeElement item
correctly, because for non-ID elements that would be index dependent (=
bad for drag & drop). Turns out that we're actually allowed to store
custom data within the TreeStoreElem, the thing is just that it gets
stored as ID pointer (highly ugly and highly misleading).
Anyway, seems to work now so I won't complain too much :)
This way we can ensure the overlay to indicate where the item would be
placed if it was dropped now is always at the correct place and doesn't
mislead the user.
Two issues are remaining, they'll be fixed separately:
* Graphical feedback when dragging within the master collection is wrong
* There's some bug where collections swap places instead, Dalai will investigate
Note 1: renamed draw_cursor to draw_text_decoration, since it was drawing
cursor, margin, selection and line highlight
Note 2: commented out code update coming next
Part of T49043
This also fixes a little bug, which caused `draw_fcurve_samples` to
never be called, and thus sampled curve range boundaries were not drawn.
Part of T49043
All engines are now called by the draw manager. Engines are separate entities that cannot interfer with each others.
Also separated draw_mode_pass.c into the mode engines.
This is to be used from the Outliner, when dragging and dropping
collections from the Active Render Layer
It also includes a cleanup on the outliner so it calls the new
functions. Note: the outliner still needs fix to allow all the
functionality here exposed.
But this will be tackled by Julian Eisel later.
This helper function was marked DEPRECATED since it uses old OpenGL calls.
Switched last 2 uses to imm_draw_checker_box, which does the same thing, only awesome.
Part of T49043
Renamed existing getter/setter that only FX shaders use. We could convert FX code to use the richer new interface or leave it as is.
Removed unused GPUShader fields. ShaderInterface tracks the same information.
It wasn't using old immediate mode, but was using
- client vertex arrays (obsolete)
- quads (obsolete)
- state attrib stack (obsolete)
- polygon mode (still allowed, but gross)
After a GLSL program is linked we can get all its inputs & never have to ask it again.
Several uniforms are considered "built-in". Nothing special about these to OpenGL itself, they just follow conventions of our built-in shaders.
This will help the matrix API, immediate & batch drawing APIs, and allow extra error/compatibility checking.
PrimitiveClass will help match shaders to draw calls & detect usage errors. For example a point sprite shader only makes sense with PRIM_POINTS.
Updated other files to include new primitive.h
Nothing happen yet when it's supposed to insert the collection into
another one, that part will be handled by @dfelinto.
See gif for demo of how it works UI wise: {F500337}
Also fixed off-by-one error in utility function.
There are now only referenced in:
* drawobject.c
* particle_edit.c
* space_image.c (a single case to be handled on workspace branch)
* rigidbody_constraint.c (to be handled in the following commit)
There were some issues with how we store outliner tree elements:
Apparently the only removable elements have been data-blocks so far.
When recreating the TreeElements, their TreeStoreElem instances were
mainly identified by their ID pointer. However non-data-blocks mostly
depend on an index. For collections, such an index isn't a reliable
measure though if we want to allow removing items. Depending on it for
identifying the TreeStoreElem instance would cause some quite noticeable
glitches (wrong highlights, two elements sharing highlight, etc).
For now I've solved that by actually removing the TreeStoreElem that
represents the removed element. A little limitation of this is that
after undoing the removal, some information might get lost, like
flags to store selection, or opened/closed state.
A better solution that would also fix this issue would be having a real
unique identifier for each non-data-block element, like an idname or even
its data-pointer. Not sure if we can get those to work reliable with
file read/write though, would have to investigate...
Also added a general Outliner tree traversal utility.
Artifacts still remained when 2 vertices were linedup in orthographic mode or with very acute vertex angles.
This commit fix that by adding even more geometry.
ifdef out most debugging code since Apple does not implement any debug extensions. We can revisit this if they ever do (don't expect that).
Changed output message so Mac users don't think --debug-gpu is broken.
I was removing deprecated/obsolete state from this function. About halfway through I started questioning the need for the whole thing.
GPU_state_print is not called anywhere, but is (was) available as a development aid.
External GL debugging tools are really good these days! We should use those to examine state & not roll our own.
Updated shader names and code that uses them.
All of these shaders produce round points that are anti-aliased and blended against the background.
These were initially named SMOOTH because they replace glEnable(GL_POINT_SMOOTH). But SMOOTH in shader-land refers to vertex attribute interpolation (like glShadeModel(GL_SMOOTH)).
Using SMOOTH to mean two things is confusing, so we now use AA to mean "the point is anti-aliased".
- Size parameter is total size of the shape, not its radius (half size). Updated hard-coded sizes to match this.
- Shader expands size to include outline.
- Fixed fringe between outline color and transparent background.
We do a strip of triangles around the triangle of interest and modify the variying vars to "trick" the fragment shader into rendering what we need.
This keeps the compatibility for both shaders.
Vertex still get half displayed when angle at the vertex is very acute.
This patch is only for the simple, no vert clipped case.
This is 2.5x slower than without the trick (on my hardware with 1million tris).
Based on the previous overlay shader from merwin.
This shader takes care of clipped vertex cases and do all edit mode face info in one pass (except face centers).
As the shading is done one the triangle itself the visual can't go beyond the surface of the mesh. That leads to half displayed edges on the outline of the mesh.
This problem can be fixed by a second pass.
This is work in progress.
This was causing blender to segfault.
We now add create a new collection and link to the layer before adding
the new object
(also included unittests, and requires updated lib/tests)
Note that since there is no (efficient) ways to get arrays of
MVert/MEdge/etc. out of a BMesh, I refactored quite heavily internals of
BKE_mesh_render.
Now, when you do need acess to mesh data to generate cached batches, you
create an abstract struct from mesh (either Mesh or BMesh if available),
and then use advanced helpers to extract needed data, on a per-item
basis (no more handling of arrays of verts/edges/... in batches code).
This allows to:
* Avoid having to create arrays of BMesh elements.
* Take advantage of existing advanced BMesh topology and connectivity data.
Reviewers: dfelinto, fclem, merwin
Differential Revision: https://developer.blender.org/D2521
Replaced all calls to `imm_draw_line` by plain `immVertex2f` calls, and
removed `imm_draw_line`, as that function was not supposed to exist in
the first place, and causes unnecessary calls to `immBegin`/`immEnd`.
Part of T49043
* Fix several wrong coordinates, causing things to be drawn in the wrong places.
* Remove unexpected return.
* Slight peformance improvement, by reducing number of shader binds.
* Minor code style stuff.
Part of T49043
This adds initial support for reordering collections from the Outliner
using drag & drop.
Although drag & drop support is limited to collections for now, this
lays most foundations for general drag & drop reordering support in the
Outliner. There are some design questions to be answered though:
* Would reordering of other data types (like objects) be a purely visual change or would it affect the order in which they are stored? (Would that make a difference for the user?)
* Should/can we allow mixing of different data types? (e.g. mixing render layers with objects)
* How could we realize this technically?
Notes:
* "Sort Alphabetically" has to be disabled to use this ("View" menu).
* Reordering only works with collections on the same hierarchy level.
* Added some visual feedback that should work quite well, it's by far not a final design though: {F493806}
* Modified collection orders are stored in .blends.
* Reordering can be undone.
* Did minor cleanups here and there.
This should give the overall direction to whom wants to finish it.
- Renamed EDIT mode engine to EDIT_MESH mode engine
- Introduce EDIT_ARMATURE mode engine
- Started to port legacy drawarmature.c to draw_armature.c
- Added runtime display matrices to EditBone and bPoseChannel
- Added Object space instance vertex shader and modified the simple lighting shader accordingly
This way we can point submodules to different branches.
There are two side-effects to this:
- Git 1.8.2 becomes the minimal required version now
to support this feature.
- Not sure how doing local changes in submodules followed
by `make update` will behave. We don't use explicit rebase
now.
Perhaps this is not so bad, since it was already quite
dangerous thing to do.
Basically DEG_OBJECT_ITER (or rather,
BKE_scene_layer_engine_settings_update) wasn't creating
Object->collection_settings data for invisible objects.
Now I'm removing those objects from the loop entirely. If we are to
bring them back we need to either create CollectionEngineSettings dat
from them or to skip them in DRW_mode_cache_populate.
test_evaluation_visibility_a failed before, but it is now fixed
test_evaluation_visibility_b passed before and was used as control to make sure it was not broken
Based on D2371 from @ryry. Mostly T49043, a little T49042.
Deleted some unused drawing code instead of updating it.
I have a few more things in mind for this file... tomorrow!
[Note: this patch functionality was implemented in parallel, independently at bf83f097ad
That said, the original patch was also removing an unnecessary include,
so here it is]
Replaced the one call to `glutil_draw_lined_arc`.
This seems to be the only draw call in this file.
Reviewers: merwin
Tags: #bf_blender_2.8
Maniphest Tasks: T49043
Differential Revision: https://developer.blender.org/D2497
This is a more complex approach, which makes me really want to use
IDProperty instead (assuming we handle their merging nicely).
In fact I would expect this to happen in readfile.c, not during
doversion, but I can revert this later.
For now this allow for demo files saved with 2.8 to keep working even
after we add/remove engine settings properties.
The values are merged. There is no purge though, so
old CollectionEngineSettings and CollectionEngineProperty will live
forever (for the time being).
This prevents crashes when a file was saved with 2.8, but a new
engine settings property was created.
In those cases any previous collection settings are wiped out. We can do
an elegant merge soon.
Other than the general conversion:
* Made some slight aesthetic improvements.
** Removed gradients.
** Replaced stipples with transparency for hidden strips.
** Made strip borders less harsh.
** Removed stripes from offsets and made them brighter.
* Made only the visible parts of waveforms be drawn.
* Fixed a few drawing bugs.
** Background was not being drawn when buffer is NULL, and no
grease pencil is being drawn.
** Offset drawing ignored strip visibility.
Also, note that diagonal stripes for locked and error strips, are still
being drawn with the old api, as they await a new shader in order to
be converted.
Part of 49043
`SEQUENCER_OT_slip` was calling `draw_sequence_extensions` to redraw the
extensions during modal operation, but that is redundant, as it is
already called by the regular draw loop. Because it was called on top of
the draw loop, it was actually obscuring other parts of the strip that
would normally be drawn on top of it.
Somewhat part of 49043
The idea is to iterator over the active layer of the current scene and
then over the active layer of the set scenes.
In the future, once we get workspace we will get the initial renderlayer
from context, while the background sets will still use their active
renderlayer.
Some tests may break Blender, which makes the entire unittest routine to fail.
They are now I isolate the tests into individual files
Kudos to Sybren Stüvel and Sergey Sharybin for the advice.
Note: at the moment test_link.py is failing (since a41bbfb7)
Instead of bothering with matrix transformations, I am simply adding the jitter to the vertices.
Related to: rB31a21135cf72c8623be7f5aee2bfdac983ceae2e
Note: This makes the jittering to not work :/
@merwin, would you know how to use gpuMatrixBegin2D for this case? I
think it must be the reason behind the lack of jittering. But I couldn't
get it to work (the 2D shader is asking for a 3D Matrix).
Part of T49043
All (except for stick and wire) are now rendered using batch or immediate API.
Using simple front facing lighting for now, waiting for gpu_basic_shader.c to be recoded.
This involved some refactoring. The original code was relying on a cache of pre-allocated arrays which in turn were still re-populated every redraw loop.
We now ditch those arrays, and make the draw "on the fly".
Part of T49043
@merwin can you just check if you foresee any performance impact with this approach?
How to test this drawing: create and edit a curve and press shift + drag your mouse (or tablet). The Curve needs a Bevel Depth > 0.0.
Note: The ideal solution would be to use a different shader, that takes
no lighting. However according to Clément Foucault there is an assert preventing the same batch to
me used with different attributes (or something like that). Il wait
until the end of such resolution before revisiting this. That said, it
is working fine.
Part of T49043
Differential Revision: https://developer.blender.org/D2501
Note: we are now merging all the collection engines (mode and render), which eventually may get slow. But as stated before, this is to expose the functionality, while waiting for proper depsgraph integrated solution.
I didn't manage to get the proper object context in the collection
properties editor. That said I got it working for now in a temporary way
since this will change once we get workspaces anyways
(see changes in buttons_context.c and
rna_scene.c::rna_LayerCollection_mode_settings_get)
I still need to handle the merging of the settings. I will find a
provisory solution while we wait for depsgraph.
(also layer_collection_create_mode_settings_object and layer_collection_create_mode_settings_edit could probably be elsewhere - under draw/engines likely)
Also some conversion to new imm mode (T49043).
Multiple editors affected.
We could push this even further & draw all keyframes in an editor with a single draw call.
Something is strange with keyframe markers in blender2.8 -- they're not showing up before or after this commit. They do appear in master. This commit probably needs some follow-up work after keyframes are showing again. Better to share this code now instead of sitting on it.
Now we can draw keyframe markers as point sprites, with fewer draw calls and state changes.
Based on the builtin shader for round points with anti-aliased outline. This one is more pointy.
Changed the color function to output a float[4] to use with shaders.
Temporary leaving the UI_ThemeColor/glColor function.
Porting draw_bone_octahedral (wire) to Batch API.
ui_draw_but_TRACKPREVIEW
Changed stipple shader usage to a bunch of GL_LINES with flat color
OpenGL immediate mode: interface_draw.c (end)
Eradicate leftover legacy functions.
Fix a crash with histogram resolution.
coding style, float literals
Converted some (expr / literal) to (expr * literal) where it does not impact readability.
Simplified a few function calls.
ui_draw_but_COLORBAND
Introduced a new checker shader to be used mostly on transparent areas.
OpenGL immediate mode: interface_draw.c (cont)
ui_draw_but_UNITVEC
Introduced a new shader to be used for simple lighting.
Some `UI_ThemeColor` calls were left in converted files, in some cases
because they were just overlooked, and in the case of text drawing,
because the new BLF color functions were not yet implemented at the
time of conversion.
Also converted one `drawcircball` call that was left in
transform_constraints.c
Part of T49043
Still has one `UI_ThemeColor` call, because drawing is happening in a DM
drawing callback which hasn't been converted yet.
Also has some old gl calls that are #ifdef'ed out.
This also changes active face drawing in UVs from stippled to a solid
color, which makes active faces much more visible, and also looks nicer.
The same should probably be done for active face drawing in the 3d view.
(has been discussed with merwin on IRC)
Part of T49043
The parent_selected() function mixed semantics of "needs to be exported"
and "is selected", which is confusing. Now just selected objects are
exported to Alembic; any parent transforms that are required were already
taken care of by other code.
Things like selection outlines didn't work at all.
Caused by rBc973e8d2da5cf3f.
When splitting up bitflags, the equivalent to `foo->flag & (bar1 + bar2)` is
`(foo->flag1 & bar1) || (foo->flag2 & bar2)`, *not*
`(foo->flag1 & bar1) && (foo->flag2 & bar2)`.
Also, let's please avoid using '+' operator for bitwise operations, a
binary addition is a binary OR *with* cary, which can cause quite some damage.
Fix outliner related crashes. Basically in some functions bContext was
not passed around, so CTX_data_scene_layer(C) was crashing.
Right now we still rely on ob->flag SELECT in some places. In order to use the base flag we will need to bring back the Bases to the outliner.
Adds a new outliner display mode "Collections" which draws the active
collection. We might want to rename it to "Active Collection" if we don't
plan to support showing other collections there.
Also added the buttons for restricting visibility and selectability.
@dfelinto, code in restrictbutton_collection_hide_cb and
restrictbutton_collection_hide_select_cb is duplicated from
rna_LayerCollection_hide_update and
rna_LayerCollection_hide_select_update, maybe utility functions would be
handy for this?
(and replace more instances of BaseLegacy/scene->base with Base/sl->object_bases)
Still need mouse selection, box selection, and menu selection
Also, there is still a problem with BA_WAS_SEL, at the moment only the
objects centers are highlighted.
To bring this fix a step further we need to address all the BA_WAS_SEL instances, and make sure they follow the new design.
This commit allow you to see the object selected (its center anyways) when you do select all.
Note: in the clay engine selection (a) was already working fine.
Every time:
* A collection settings is set
* A collection visibility changes
* An object is added/removed/ ...
We need to recalculate the "accumulated" CollectionEngineSettings that
the render engine should use for an object.
This is to be handled by the depsgraph. Meanwhile this code should allow
us to start using those settings in the render engines.
Note: We are storing this in the objects, which means we can only have
one active calculated option every time.
This is intended to get the conversation with the Depsgraph department
going.
Initial work by Clément Foucault with contributions from Dalai Felinto
(mainly per-collection engine settings logic, and depsgraph iterator placeholder).
This makes Blender require OpenGL 3.3. Which means Intel graphic card
and OSX will break. Disable CLAY_ENGINE in CMake in those cases.
This is a prototype render engine intended to help the design of real
render engines. This is mainly an engine with enphasis in matcap and
ambient occlusion.
Implemented Features
--------------------
* Clay Render Engine, following the new API, to be used as reference for
future engines
* A more complete Matcap customization with more options
* Per-Collection render engine settings
* New Ground Truth AO - not enabled
Missing Features
----------------
* Finish object edit mode
- Fix shaders to use new matrix
- Fix artifacts when edge does off screen
- Fix depth issue
- Selection sillhouette
- Mesh wires
- Use mesh normals (for higher quality matcap)
- Non-Mesh objects drawing
- Widget drawing
- Performance issues
* Finish mesh edit mode
- Derived-Mesh-less edit mode API (mesh_rende.c)
* General edit mode
- Per-collection edit mode settings
* General engines
- Per-collection engine settings
(they are their, but they still need to be flushed by depsgraph, and
used by the drawing code)
Design Documents
----------------
* https://wiki.blender.org/index.php/Dev:2.8/Source/Layers
* https://wiki.blender.org/index.php/Dev:2.8/Source/DataDesignRevised
User Commit Log
---------------
* New Layer and Collection system to replace render layers and viewport layers.
* A layer is a set of collections of objects (and their drawing options) required for specific tasks.
* A collection is a set of objects, equivalent of the old layers in Blender. A collection can be shared across multiple layers.
* All Scenes have a master collection that all other collections are children of.
* New collection "context" tab (in Properties Editor)
* New temporary viewport "collections" panel to control per-collection
visibility
Missing User Features
---------------------
* Collection "Filter"
Option to add objects based on their names
* Collection Manager operators
The existing buttons are placeholders
* Collection Manager drawing
The editor main region is empty
* Collection Override
* Per-Collection engine settings
This will come as a separate commit, as part of the clay-engine branch
Dev Commit Log
--------------
* New DNA file (DNA_layer_types.h) with the new structs
We are replacing Base by a new extended Base while keeping it backward
compatible with some legacy settings (i.e., lay, flag_legacy).
Renamed all Base to BaseLegacy to make it clear the areas of code that
still need to be converted
Note: manual changes were required on - deg_builder_nodes.h, rna_object.c, KX_Light.cpp
* Unittesting for main syncronization requirements
- read, write, add/copy/remove objects, copy scene, collection
link/unlinking, context)
* New Editor: Collection Manager
Based on patch by Julian Eisel
This is extracted from the layer-manager branch. With the following changes:
- Renamed references of layer manager to collections manager
- I doesn't include the editors/space_collections/ draw and util files
- The drawing code itself will be implemented separately by Julian
* Base / Object:
A little note about them. Original Blender code would try to keep them
in sync through the code, juggling flags back and forth. This will now
be handled by Depsgraph, keeping Object and Bases more separated
throughout the non-rendering code.
Scene.base is being cleared in doversion, and the old viewport drawing
code was poorly converted to use the new bases while the new viewport
code doesn't get merged and replace the old one.
Python API Changes
------------------
```
- scene.layers
+ # no longer exists
- scene.objects
+ scene.scene_layers.active.objects
- scene.objects.active
+ scene.render_layers.active.objects.active
- bpy.context.scene.objects.link()
+ bpy.context.scene_collection.objects.link()
- bpy_extras.object_utils.object_data_add(context, obdata, operator=None, use_active_layer=True, name=None)
+ bpy_extras.object_utils.object_data_add(context, obdata, operator=None, name=None)
- bpy.context.object.select
+ bpy.context.object.select = True
+ bpy.context.object.select = False
+ bpy.context.object.select_get()
+ bpy.context.object.select_set(action='SELECT')
+ bpy.context.object.select_set(action='DESELECT')
-AddObjectHelper.layers
+ # no longer exists
```
Marks matrix state as dirty so shader will use the latest values from glScale, glTranslate, etc.
We'll remove this after transitioning 100% to the new matrix API, which handles this sort of thing automatically.
Part of T49450
We had two versions of several BLF functions -- one for a specific font ID & another for the default font.
New BLF_default function lets us simplify this API & delete the redundant code.
There are still many places to fix. I'll miss the bright yellow!
This commit also uses the new BLF_default function where possible.
Part of T49043 since we call glColor less often.
Minimum target is still 3.3
On AMD pro driver, asking for a 3.3 context gives us *exactly* 3.3, not 3.3+ as desired.
Have not tested proprietary NV or Intel drivers, but this fix should work on all vendors.
-Remove NPOT check as it should be supported by default with OGL 3.3
-All custom texture creation follow the same path now
-Now explicit texture format is required when creating a custom texture (Non RGBA8)
-Support for arrays of textures
Reviewers: dfelinto, merwin
Differential Revision: https://developer.blender.org/D2452
blenderplayer uses BLF but not Editor UI, so we got a link error for the missing UI_GetThemeColor function.
Moved the new function from BLF to UI.
@Blendify reported problem in IRC
For anything fancier than regular Theme colors (shading, alpha, etc.) do this:
unsigned char color[4]
UI_GetThemeColor[Fancy]4ubv(... color)
BLF_color4ubv(fontid, color)
That way the BLF color API stays simple.
This code was already disabled.
We might be able to simplify GPU_check_scaled_image even further. Maybe even delete it? Just removing the obvious stuff now.
Keeping is_power_of_2_resolution function since it is still used in DXT logic.
Note: when in edit mode this depsgraph update is not being called. We are using DerivedMesh in those cases, so it is fine. I would like to investigate this though
This includes a few fixes in the MBC_ api.
The idea here is for this to be the only interface the render engines
will deal with for the meshes.
If we need to expose special options for sculpting engine we refactor
this accordingly. But for now we are shaping this in a per-case base.
Note:
* We still need to hook up to the depsgraph to force clear/update of
batch_cache when mesh changes
(I'm waiting for Sergey Sharybin's depsgraph update for this though)
* Also ideally we could/should use BMesh directly instead of
DerivedMesh, but this will do for now.
Note 2:
In the end I renamed the `BKE_mesh_render` functions to `static
mesh_render`. We can re-expose them as BKE_* later once we need it.
Reviewers: merwin
Subscribers: fclem
Differential Revision: https://developer.blender.org/D2476
Took pieces from D2316 and D2359, changed a few more things.
- use new immediate mode
- use new matrix stack
- remove state push/pop
Part of T49043 and T49450
After revert the commit rB4b99958ca12642, the line added at the end of the enum is not necessary anymore because it is replaced by the corresponding element in the list in the right position.
This is part of T49043
fixed up some color/rect calls
fixed up ANIM_channel_draw()
Reviewers: krash, merwin
Reviewed By: merwin
Tags: #bf_blender_2.8
Maniphest Tasks: T49043
Differential Revision: https://developer.blender.org/D2377
Had to add a few utility functions to replace existing functions. Let me know if these are duplicates.
Reviewers: merwin
Reviewed By: merwin
Tags: #bf_blender_2.8
Maniphest Tasks: T49043
Differential Revision: https://developer.blender.org/D2434
This does not address stapling shader in 2.8, though the solution can be
similar (own shader, not polutting interlace shader).
part of T49043
Reviewers: merwin
Differential Revision: https://developer.blender.org/D2440
Please **DO NOT** add changes from master when it's totally uneeded!
Changes to BLI_ area most certainly shall *always* be done in master,
there is absolutely no point in adding more diff between the two
branches than needed, will only makes merging more cumbersome!
Conflicts:
CMakeLists.txt
source/blender/blenlib/intern/math_vector_inline.c
This reverts commit 5aa19be912 and b4a721af69.
Due to postponement of particle system rewrite it was decided to put particle code
back into the 2.8 branch for the time being.
Shuffle existing code, hook it up to the new (& old) viewport.
Also the 3D mouse rotation guide for NEW viewport only. Minor feature not worth enabling for legacy 3D view.
Basically all this does is drawing layout previews into the opened layout search menu.
https://youtu.be/RHYWtZP7pyA
The previews are drawn using offscreen rendering so they can't use multi-threading (yet!). But that shouldn't be an issue since only a handful of previews are drawn at the same time. Normally we only need to redraw the preview if a screen layout was changed. Would be nice if PreviewImage could store if it supports threaded rendering.
Previews are saved in files, might be useful if you later want to support appending layouts.
Adds a new file screen_draw.c.
This fixes multiple problems on latest Mac OS + Xcode. Hopefully does not cause any on other platforms.
The Xcode detection logic could use further cleanup. It's checking several old versions that are unsupported for Blender 2.8+ development.
Needed because deps graph can destroy objects from any thread. We ran into the same problem & solved it in GPU_buffers.
Implemented in C++11 since it provides the needed machinery. The interface is in C like the rest of Gawain.
This means editing a property will now always affect all selected objects, bones or sequencer strips. Support for this was added in rBdfbb876d4660 but you had to hold the Alt-key to use it. The old behavior of only editing the active object will not be kept like decided in the 2.8 workflow meeting (reports comming). If you only want to edit the active object, you have to deselect others.
There are still a couple of issues to be resolved (listed below), but having it enabled by default helps testing and getting used to it and should motivate us to fix them ;)
To be fixed:
* Give users hint when edits are applied to all objects/bones/strips ("Applying to x objects") - there are ideas but we need to finalize and implement them
* Make it work better in corner cases (material editing, modifier property editing, etc)
Note: Values usually override the initial value of the object/bones/strips, except of number buttons where it depends if you enter the value (absolute override) or drag the value (add value change). This behavior is consistent with multi-button editing.
Updated the GL calls to the new immediate mode.
I left some glcolor calls which I'm not sure wether thats right?
Part of T49043
warm regards,
Sebastian Witt
Reviewers: merwin
Reviewed By: merwin
Tags: #bf_blender_2.8
Maniphest Tasks: T49043
Differential Revision: https://developer.blender.org/D2305
Just as mentioned in title. Need new functions for calls found in `transform.c`
T49043
Reviewers: merwin
Tags: #bf_blender_2.8
Differential Revision: https://developer.blender.org/D2358
This conversion is pretty straightforward.
The code for debug drawing is not great, but it does the job.
Rewriting it is for another day, if it becomes more widely used.
Convert UI_view2d_constant_grid_draw to new immediate mode.
Part of T49043.
Reviewers: merwin
Reviewed By: merwin
Tags: #bf_blender_2.8
Differential Revision: https://developer.blender.org/D2298
Convert ED_region_grid_draw to new immediate mode.
Part of T49043
Reviewers: merwin
Reviewed By: merwin
Tags: #bf_blender_2.8
Differential Revision: https://developer.blender.org/D2289
all is in the title too..
Reviewers: merwin
Reviewed By: merwin
Subscribers: Blendify, Severin
Tags: #bf_blender_2.8, #opengl_gfx
Maniphest Tasks: T49043
Differential Revision: https://developer.blender.org/D2337
Consumes much less memory (1/3 for both normals = 32 bytes less per edge). Same visual result.
We can pack normals for other draw modes to get similar savings.
Part of T49165
Most useful for packed normals, which take 1/3 the space of float32 normals.
2-bit alpha|w component is ignored for now.
Batch API can use these now, will add support to immediate mode API if desired.
Enabling on Windows first. Will enable on all platforms after we switch Blender to core profile.
Drop SciTech support & workarounds for WinCE and OpenGL ES.
AMD_debug_output is still in the code but disabled. Once I verify the newer extensions are available on all the GPU + OS combos we support we can delete this disabled code.
Motivations:
1) GLenum is too broad; tightly-defined enum just for this is safer.
2) enable a Vulkan future
New code should use these instead of GL_FLOAT etc. When all existing code has been updated to use new enum, we can drop compatibility with GLenum values.
Early work towards 10_10_10 format, more to come soon.
Caused by 4811b2d356 which caused the event handler hack that is used to fire up the file browser from other operators to fail. Basically the context from before the file browser is opened gets stored and used later for executing the actual file read/write operation (in this case, saving image). This context storage is cleared when exiting an editor since 4811b2d356, which is technically correct, but causes usage of NULLed context data in this case, because the file browser is exited before the file read/write operation is executed.
For now I solved this by moving the fileselect handler to list of normal handlers, instead of modal ones. 4811b2d356 only touches list of modal handlers so we avoid the crash. Ideally we'd completely refactor how the file browser opening works to get rid of these event handler hacks.
Note that I wouldn't be suprised if this causes other regressions, but I couldn't find one so worth a try.
As our library of built-in shaders grows, it's important to create, access, and discard them efficiently.
Lookup via GPU_shader_get_builtin is now constant time instead of linear (# of built-in shaders). This is called very often with our new immediate mode.
Creation and discard are unified.
Adding a new shader requires fewer steps.
365 lines shorter :D
all is in the title.
Reviewers: merwin
Tags: #bf_blender_2.8, #opengl_gfx
Maniphest Tasks: T49043
Differential Revision: https://developer.blender.org/D2336
This one is for the straight line (white with width 2.0 over a black with width 4.0) drawn when you use the gradient tool.
To test: Image editor, create / open an image, choose image paint mode and on the tool shelf: choose the Fill brush and enable "Use Gradient" for it. Then click and drag on the image.
From what I checked, calls to glLineWidth are not being removed yet, so I kept them.
Reviewers: dfelinto, Severin, merwin
Reviewed By: merwin
Tags: #bf_blender_2.8, #opengl_gfx
Maniphest Tasks: T49043
Differential Revision: https://developer.blender.org/D2312
D2311 by @ianwill
This is the radial control that appears when we change the size of a brush in sculpt and vertex and texture painting modes, by pressing "f".
Also includes a new built-in shader that can be useful in other places.
Part of T49043
Gawain does very strict runtime checking to help us catch coding errors. Final release should disable most of these checks, so I'm disabling now for all non-debug builds.
When writing Blender code that uses Gawain, always make debug builds and test there! "make lite debug" is my favorite.
Right now this only affects other objects in wireframe. The idea is to do something similar for other draw modes, and keep focus on the edit object.
As seen at #bcon16
Most of this was already in place, just enabling & adding comments.
One fix was needed to make batch uniforms stick between multiple draws.
Added comments to selection outline; no functional changes there.
As seen at #bcon16
Geometry shader version is automatically used on modern GL runtimes. Legacy version is used on pre-3.2 systems (Mac, Mesa compat profile). They have the same inputs and visual result.
TODO: specialized versions that are less flexible -- draw ALL edges or draw JUST silhouette edges.
Part of T49165
(also, fix warning regarding const float being written)
You only see the color if you use the "modern" viewport option
(otherwise I believe Blender is drawing the old on top of the new outline).
That said, in the "modern" viewport we have unfreed mem. To be
investigated separately.
Totally WIP.
Started with copies of legacy routines, modified to use the new shaders & batch cache. Not all features are implemented; this is why we keep legacy viewport around during development!
Gawain batches are built on demand while drawing, then kept in this per-DerivedMesh cache.
A mesh's batches try to share vertex buffers as much as possible.
Not sure if this file is the best home for this code, but functions in this file are the only users of the cache. So maybe.
Big part of T49165
Surveying buffer usage & clears for new viewport. Not yet perfect, but closer. Committing from Mac so I can test this on Windows.
Using new matrix API (T49450) for gradient background.
Removed some of my earlier glActiveTexture calls. After reviewing the
code I now trust that GL_TEXTURE0 is active by default. Fewer GL calls,
same results.
Fixed some misuse of glActiveTexture & glUniformi, mostly my fault.
Caught by --debug-gpu on Windows. Don't know why this appeared to be
working previously!
Plus some easy cleanup nearby.
Works great on Mac now. Will test on Windows & Linux (Mesa) tomorrow. Related to T49505
Main fix is glActiveTexture and immUniform1i.
TEXTURE_2D vs TEXTURE_RECTANGLE is now a compile-time option. Both are available starting in GL 3.1 so there's no need for a run-time check.
Removed glClears that I don't think are necessary.
Prevent TEXTURE_2D from creating extra mipmap levels. We only need level 0.
Some minor cleanup: booleans and variable declarations.
At the moment this already shows that the depth is the same after the solid plates and in the very end of drawing, while they should be different. Later on we can adapt this to show different buffers we want to debug.
I am using near=0.1, far=2.0 for my tests. I decided not to make a doversion for near/far because this is for debugging only
The active camera has a solid "up" triangle instead of the usual outline. We want to see both sides of this triangle. Disable face culling only when drawing the active camera, not for every camera.
- any shader program can use matrix state (not only built-in shaders)
- you can mix matrix & begin/end calls, and the bound shader will use the latest matrix state
Part of T49450 & T49043
Mostly the same as before. Except:
- avoid drawing same lines multiple times
- helper functions take "bool filled" argument instead of GLenum
- drawcamera_volume draws its own near & far planes
widget_draw_text was calculating wrong display length when field is too narrow to show entire input string. Gawain assert caught this 11 function calls away!
Thanks to @ianwill for reporting.
Fixes an assert in drawing code.
Might need further work to support variable-thickness strokes (from pressure-sensitive stylus). This all is due for geometry shader overhaul anyway.
- rename image shaders to describe exactly what they do
- rename inputs to match other built-in shaders
- set & use active texture unit
- no need to enable/disable textures with GLSL
- pull vertex format setup out of loops
Turns out CTX_wm_region returns mostly NULL in wm_manipulatormaps_handled_modal_update. Now propertly unsetting area/region data of handlers when deleting area/region.
Non-power-of-two textures are always allowed. Keeping the disabled checks in the code in case we support OpenGL ES in the future. Even then it should be a compile-time check, not at run-time.
Own mistake in 9a9a663f40. Guessed there is a case where we have to rebuild the tree but everything seemed fine... It didn't work in display modes like "Data-Blocks".
Couple of issues here:
* Missing initialization for 3D view keyframe options for "Reset to Default Theme"
* Alpha values not reset correctly on "Reset to Default Theme"
* Alpha values of timeline keyframe options not reset correctly for old files
Also corrected old version patches even though they're overridden later, to avoid more issues in case people copy this code.
Corrections to d7af7a1e04 and 8d573aa0ec
* LMB now replaces selection instead of adding to it. Shift+LMB adds to selection (or removes if already selected). This is usual selection behavior Blender.
* Outliner selection isn't completely separate from object/sequencer-strip/render-layer/... selection anymore, when selecting an outliner item we now always try to select (and activate) the object it belongs to. Previously you had to click the name or icon of an item to select the object (or whatever) and on empty space within the row to set outliner selection.
* Collapsed items may show click-able icons for their children (nothing new). Clicking on such an icon will also select the hidden item it represents now, you'll notice after opening the parent. This valid from a technical POV, I'm not sure if this is wanted from user POV though. Changing would be easy, feedback welcome!
* Code cleanup.
Part of T37430.
GL 3.3 is the new minimum. Compatibility profile for now, core profile eventually. During development, GL 3.0 (on Mesa) and 2.1 (on Mac) will still work.
Part of T49012
Make color values compact. Set color once per primitive. Use new immSkipAttrib to avoid useless color copies.
All of this should make text drawing less CPU hungry.
Now you can explicitly skip a vertex attribute -- you don't give it a value and it won't get a copy of the previous vert's value. Useful for flat interpolated per-primitive values.
This is an advanced feature. Expect garbage in the empty spaces, and copies of garbage if you rely on the attrib copy behavior after skipping.
This was already fast on Apple, but @Severin and @dfelinto noticed slowdowns in user prefs, which is text heavy.
The problem was immBeginAtMost not being smart about VBO write flushing. immBeginAtMost can use all of its allocated range or only a subrange. The previous code was forcing back-to-back draw calls and buffer writes to serialize. This commit lets OpenGL know that our VBO writes never overlap, so there's no need to wait.
Should be much faster now!
1 or 2 draw calls per node instead of 1 per socket (inputs + outputs).
Rearranged draw order so we set uniforms less frequently.
Some style & dead code cleanup.
Part of T49043
Smooth round point with outline (uniform color) and fill (varying color).
Updated shader naming scheme: a shader that doesn't deal with color does not have to say "no color". Vertex shaders do not have to say "uniform color" since their frag counterpart actually has the uniform. Each name should describe what that shader *does*, not what it *doesn't do*.
I use your new point shader to draw the node's soket
Reviewers: Severin, merwin
Maniphest Tasks: T49043
Differential Revision: https://developer.blender.org/D2286
Some little UI polish to get familiar with outliner code (but also because it's a useful feature). Committing to blender2.8 branch but can also port to master (2.7) if wanted.
This basically causes the mouse hovered element to be highlighted. Contrast of the highlight should be fine, even with a non-default theme. Also did some minor cleanup.
The problem was the function tried to draw a line with one point only. This fix will be replaced by new geometry shaders, but we need while this change is not ready.
Before this change, the stroke was filled only after complete the stroke drawing. For artist is better to get a feedback of the area he is filling while drawing, so this commit draws the filling area while drawing.
The triangulation of the stroke is recalculated every time the function is called because using a cache is not useful because the points information is changing all the time while the stroke is being drawing.
API stays exactly the same.
Attribute names can still be of variable length, as long as the average length does not exceed AVG_VERTEX_ATTRIB_NAME_LEN. Since this includes unused attributes (length = 0) the current avg of 5 might even be too high.
New functions activate & deactivate immediate mode. Call these when switching context and the internal VAO will be handled properly. VAOs are one of the few things *not* shared between OpenGL contexts.
Was multiplying matrices backward, so concatenation was broken. Fixed!
Also a way to mix legacy matrix stacks with the new library. Just during the transition! Anything within SUPPORT_LEGACY_MATRIX will go away after we switch to core profile.
Part of T49450
Reworked logic in the few places that still called this. Deleted the "GLSL not supported" fallbacks.
Also removed some nearby checks for ARB_multitexture and OpenGL 1.1. Blender 2.77 removed checks like this, but game engine still has some.
Built-in shaders now use uniforms instead of legacy built-in matrices. So far I only hooked this up for new immediate mode.
We use the same matrix naming convention as OpenGL, but without the gl_ prefix, e.g. gl_ModelView becomes ModelView.
Right now it can skip the new matrix stack and use the legacy built-in matrices app-side. This will help us transition gradually from glMatrix functions to gpuMatrix functions.
Still some work to do in gpuBindMatrices. See TODO comments in gpu_matrix.c for specifics.
@zeauro reported this issue:
texture2DRect needs the ARB_texture_rectangle extension.
But isn't that an OpenGL 2.1 feature and should be part of GLSL 1.2+?
This should fix it, and future shaders should do something similar.
Got rid of GLU and some matrix manipulation. Everything is shader driven now, drawn with point sprites.
Still plenty to do in this file...
Part of T49042 and T49043
Simple convert of drawing emboss lines to new immediate mode.
Part of T49043
Reviewers: merwin
Reviewed By: merwin
Subscribers: dfelinto
Tags: #bf_blender_2.8
Differential Revision: https://developer.blender.org/D2271
Made function categories more clear & added more notes about how to use this API.
immEndVertex is no longer part of the public API.
Minor cleanup & organizing of recent additions.
I change UI_draw_roundbox_gl_mode to use immediate API.
The rest of the change is the call to the function.
I also make some change in UI_ThemeColor4(int colorid) for eg to make convenience to use.
I would really like to know if it's the good way to do, if yes I will make all the change in the node_daw.c after, else say me what's wrong and how to deal with color else.
Reviewers: merwin, dfelinto, Severin
Reviewed By: merwin
Subscribers: fablefox, Severin
Tags: #bf_blender_2.8, #opengl_gfx
Maniphest Tasks: T49043
Differential Revision: https://developer.blender.org/D2274
@dfelinto reported crash when setting grid subdivisions too low.
Code was setting color twice and Gawain was catching this. Fix is to only set regular grid color when we have regular grid lines to draw. Then emphasized grid lines are free to set their own color further down.
This commit lands the core backend of the Custom Manipulators project onto the blender2.8 branch. It is a generic backend for managinig interactive on-screen controls that can be integrated into any 2D or 3D edito. It's also already integrated into the window-manager and editor code where needed.
NOTE: The changes here should not be visible for users at all. It's really just a back-end patch. Neither does this include any RNA or Python integration.
Of course, there's still lots of work ahead for custom manipulators, but this is a big milestone. WIP code that actually uses this backend can be found in the 'custom-manipulators' branch (previously called 'wiggly-widgets').
The work here isn't completely my own, all the initial work was done by @Antony Riakiotakis (psy-fi) and - although it has changed a lot since them - it's still the same in essence. He definitely deserves a big credit! Some changes in this patch were also done by @Campbell Barton (campbellbarton). Thank you guys!
Merge accepted by @brecht and @merwin.
Patch: https://developer.blender.org/D2232
Code documentation: https://wiki.blender.org/index.php/Dev:2.8/Source/Custom_Manipulator
Main task: https://developer.blender.org/T47343
More info: https://code.blender.org/2015/09/the-custom-manipulator-project-widget-project/
Want to avoid updating code we no longer use anyway.
Comments for areas to investigate or deadlines for deletion.
also some minor bool cleanup
Part of T49165
We can't prevent users from using this branch, so I'd say it's reasonable to be a bit careful about what we store to files. In this concrete case we were storing a bit-flag for temporary use (only during early viewport transition) in a bit-field that's saved in files. Doing so would mean we either can't reuse this bit later or we risk breaking files (admittedly, likely in a pretty minor way). Moved the bit-flag to a new bit-field which can be removed later.
Makes it easier to enable it and avoids jumping of the panel when activating/deactivating it (because some panels disappear then). Also changed how panel title is drawn to make it behave like other panels.
We will keep the old system working as long as we can. At the moment even the visibility flags we are getting from the old system. That will continue like this until we have decided on the new UI
A new option (set in the properties region) allows the user to pick the
"new viewport" for the rendering (in the UI: Modern Viewport).
For now we have a semi-blank file (view3d_draw.c) that can starts to take
over the drawing pipeline.
I can't guarantee we will be able to keep both drawing systems working
through the entire 2.8 development, but it should do for now.
also, we can use branches for some of the viewport development, but it's
better to keep things in 2.8 whenever we can, so people can test it.
Transition away from GLU and legacy matrix stack. Using point sprites eliminated the need for most of the matrix math!
Depends on decent support of large aliased points. NVIDIA is good at this, must test limits on AMD & Intel systems.
Still needs proper scaling based on view zoom.
Part of T49042, touches on T49043 and T49450.
Apparently GL_POINT_SPRITE is important to GL 3.2+ compatibility profile, not just to GL 2.1 as thought.
We'll remove this during the core profile transition.
At context startup, make sure our assumptions about the OpenGL version are true. Should match since we set up the contexts... but this is what asserts are for, to check "should"s!
Part of T49012
patch P397 by @lichtwert + minor const by @merwin
Notes from drawvertsN function:
this used to be called twice (once for selected/active, once for unselected -- guess: to avoid state switches[color]?)
this used to be called in a loop, too (subcurves), moved the loop here to avoid multiple init stuff
Part of T49043
WARNING! Full build is broken, alembic has not been merged in correctly and has some references to particle stuff.
Don't have time to tackle this now (and probably would be better if someone knowing what he's doing does it anyway).
Conflicts:
release/scripts/startup/bl_ui/properties_particle.py
source/blender/blenkernel/intern/library_remap.c
source/blender/blenkernel/intern/smoke.c
source/blender/editors/physics/particle_object.c
source/blender/editors/physics/physics_intern.h
source/blender/editors/physics/physics_ops.c
source/blender/editors/space_outliner/outliner_intern.h
source/blender/editors/space_view3d/drawvolume.c
source/blender/makesrna/intern/rna_smoke.c
Complete (for our needs) 2D & 3D transformation API. Should be easy to port legacy OpenGL matrix stack-based code to this. Still needs testing.
Ported ortho, frustum, lookAt functions from Viewport FX (rB194998766c65). Kept plenty of Viewport FX code from previous commit.
Stack API and 2D routines ported from Gawain. This version uses BLI_math library so everything is licensed under GPL instead of the usual MPL.
Part of T49450
mul_m4_m4m4(R, A, B) gives us R = AB in general. Existing code assumed the worst, that A and B both alias the output R. For safety it makes internal copies of A and B before calculating & writing R.
This is the least common case. Usually all 3 matrices differ. Often we see M = AM or M = MB, but never M = MM.
With this revision mul_m4_m4m4 is called in exactly the same way but copies inputs only when needed. If you know the inputs are independent of the output use the "uniq" variant to skip the saftety checks.
Is actually a redundant cast since Blender uses -funsigned-char, however I think it's fine to be explicit about it in new code so cast is required to make compiler happy. Am not a fan of -funsigned-char anyway...
Changed drawing to use smooth lines, and to fade away when axis points toward / away from screen. (transform manipulators do this already)
Also fixed a nearby (but unrelated) missing immUnbindProgram.
Part of T49043
Ignore texture matrix in the shader, stop messing with texture matrix in BLF code.
Use linear screen-space interpolation instead of perspective.
Avoid redundant call to glMatrixMode.
With USE_GLSL enabled, GPU_basic_shader(TEXTURE|COLOR) always rendered black. New shader uses a solid color + alpha channel of texture (which in our case is a font glyph). See fragment shader for details.
I prefer this approah -- multiple shaders that each do one thing well (and are easy to read/write/understand), instead of one shader that can do many things given the right options.
Fixed compile error in debug build (thanks mont29)
Renamed some functions for consistency.
New features:
Create a Batch with immediate mode! Just use immBeginBatch instead of immBegin. You can keep the result and draw it as many times as you like. This partially replaces the need for display lists.
Copy a VertexFormat, and create a VertexBuffer using an existing format.
Resize a VertexBuffer to a different number of vertices. (can only resize BEFORE using it to draw)
Was already done for immediate mode, but rearranged code to make a clean separation. Cleaned up #includes for code that uses this feature.
Added same for batched rendering.
Follow-up to rBddb1d5648dbd
API is nearly complete but untested.
1) create batch with vertex buffer & optional index buffer
2) choose shader program
3) draw!
This function modifies the GL program object, which reduces our ability to share a shader among meshes with different vertex formats. Recommended approach is to use get_attrib_locations.
Vertex Buffer to store vertex attribute data.
Element List (AKA Index Buffer) to select which vertices to use.
Batch combines these into an object that can be built once then drawn
many times.
Porting over from the C++ version… Most of this C code is compiled but
unused. Some of it is not even compiled. Committing now in case I’m
lost at sea.
Put Gawain source code in a subfolder to make the boundary between the
library and the rest of Blender clear.
Changed Gawain’s license from Apache to Mozilla Public License. Has
more essence of copyleft — closer to GPL but not as restrictive.
Split immediate.c into several files so parts can be reused (adding
more files soon…)
immBegin requires us to know how many vertices will be drawn. Most times this is fine, but sometimes it can be tricky. Do we make the effort to count everything in one pass, then draw it in a second?
immBeginAtMost makes this simple. Example: I'll draw at most 100 vertices. Supply only 6 verts and it draws only 6.
Any unused space is reclaimed and given to the next immBegin.
Was using GL_NONE to mean "no primitive" but GL_NONE and GL_POINTS are both defined as 0x0000.
Introducing PRIM_NONE = 0xF which does not clash with any primitive types.
Application code can pass ubytes, Gawain converts to float vec4 expected by shader.
For now the conversion is simple linear. We can add sRGB support later if needed.
Significant rewrite with some improvements.
Maintain visual hierarchy of the grid:
- emphasized lines draw atop normal lines
- axes draw atop all lines (same as before)
Draw axes only once, not twice.
Return early if nothing to draw.
Single draw call for the default case (grid floor with X and Y axes).
Z axis needs a second draw call because it uses 3D coordinates.
Part of T49043
Also reduced number of matrix ops by generating final positions directly.
Also removed a display list (deprecated in modern GL).
Tried to reuse sinval & cosval tables but those values are skewed (last value repeats first value, middle values are squished to compensate). Went with sinf & cosf instead.
Part of T49042
The little grabby handle in the corner of an area. Now uses 1 draw call
instead of 6.
Also one version of the (+) icon to show a hidden region. Why do we
have multiple versions of this?
Fixed a harmless signed/unsigned error.
Fixed a GL state error that prematurely disabled blending.
Added imm_draw_filled_circle function, which can be used for drawing
other widgets.
Work toward T49042 and T49043
In addition to pack of conflicts listed below, also had to comment out particle part of new Alembic code... :/
Conflicts:
intern/ghost/intern/GHOST_WindowWin32.cpp
source/blender/blenkernel/BKE_effect.h
source/blender/blenkernel/BKE_pointcache.h
source/blender/blenkernel/intern/cloth.c
source/blender/blenkernel/intern/depsgraph.c
source/blender/blenkernel/intern/dynamicpaint.c
source/blender/blenkernel/intern/effect.c
source/blender/blenkernel/intern/particle_system.c
source/blender/blenkernel/intern/pointcache.c
source/blender/blenkernel/intern/rigidbody.c
source/blender/blenkernel/intern/smoke.c
source/blender/blenkernel/intern/softbody.c
source/blender/depsgraph/intern/builder/deg_builder_relations.cc
source/blender/gpu/intern/gpu_debug.c
source/blender/makesdna/DNA_object_types.h
source/blender/makesrna/intern/rna_particle.c
Scanned Blender code for commonly used glVertex, glColor functions.
Implemented immVertex, immAttrib versions of these to ease transition
away from legacy OpenGL.
Keeping unused gla2D code because it might be useful, or inspire
something useful, for Blender 2.8 development.
Also removed an old Mac driver bug workaround. Disabled this before the
2.77 release and nobody has complained.
Errors are caught & reported by our GL debug callback. This gives us way more useful information than sporadic calls to glGetError.
I removed almost all use of glGetError, including our own GPU_ASSERT_NO_GL_ERRORS and GPU_CHECK_ERRORS_AROUND macros.
Still used in rna_Image_gl_load because it passes unvalidated input to OpenGL functions.
Still used in gpu_state_print_fl_ex as an exception handling hack -- will rewrite this soon.
The optimism embodied by this commit will not prevent OpenGL errors. We need to analyze what would cause GL to fail at certain points and proactively intercept these failures. Or guarantee they can't happen.
Legacy OpenGL has a matching Vertex3fv for every Vertex3f, and so on. Add something similar to Gawain, just for a few common functions. Might add more as the need arises.
These are intended for very simple drawing. No lighting etc.
Shares some fragment code with the 2D shaders.
Similar to their 2D counterparts, but are not combined because of
future plans for separate 2D & 3D matrix stacks.
EXT_gpu_shader4 lets us say “noperspective” in GLSL #version 120 just
like in later GLSL.
Mac shader now matches modern GLSL available on other platforms.
When we ask for GL 3.2 compatibility profile:
AMD (Radeon HD 6970) gives us exactly this version
NVIDIA (Quadro K600) gives at least this version
Still need to check Intel behavior
We want *at least* the version requested, plus more recent features if
available.
Both GPUs tested & mentioned above are capable of GL 4.5. With this
commit they both give 4.5 to Blender.
Helps most when real-world units are used.
Previous code started at the smallest visible unit (e.g. Inches) then
followed to Feet, Yards, Chains, Furlongs, Miles. Always to the largest
unit of the set, even though most would be way off screen.
New code knows whether it skipped any grid lines for the next unit to
fill in, can stop once all lines are on screen.
Previous commit works on Windows, found some issues after trying on Mac.
- benign warnings about && within ||
- replaced nearbyint() with round() to avoid floating point environment
surprises
- remquo function appears to be broken on Mac (!) results were way way
off. Replaced with simple division.
- minor tweaks to debug output
Work toward T49043, with a side of client vertex arrays.
Not a straightforward port from glVertex to immVertex since Gawain needs
to know how many vertices we'll be drawing *before* we start drawing.
Fixed these not-so-great aspects of grid drawing:
- coarse grids would draw atop some lines from the finer grids
- visible axes would draw atop lines from coarse grid
- axes were drawn even if they weren't in view
- terrible misuse of vertex arrays
- each line issued its own draw call
New code draws each line exactly once. The entire grid is one draw call.
Bonus: I had to / got to learn how the units system works!
New value of 4MB should handle our needs without taking up too many GPU
resources.
Old value of 1KB was for observing what happens when the buffer fills up
and we need to flush and start a new one.
Getting this ready for Gawain treatment.
Removed setlinestyle(0) -- solid lines are the default, hope this isn't
really needed.
Eliminated redundant math.
Arithmetic is still double precision, passed to OpenGL as single
precision. Even though it said GL_DOUBLE before, values were converted
to GL_FLOAT internally.
Use C99-isms for declaring variables close to where they're used.
Minor whitespace tweaks.
This serves as a good example of the Gawain API. (I’ve thought of a
better way to draw drop shadows, but that can wait!)
Part of T49043.
This is what I had in mind for D1753.
If you don’t specify a vertex’s color, it will use the color of the
previous vertex. Similar for all other attributes.
This matches the legacy behavior of glColor, glNormal, etc. *except* in
Gawain the first vertex of each immBegin must be fully specified. There
is no “current” color in the new system.
Should be simpler to use now.
Made vertex format structure private. New immVertexFormat() function
clears and returns the format. Devs can start with add_attrib(format...)
and not have to clear it first.
immBindProgram automatically packs the vertex format if needed.
Updated 3D cursor drawing to use new API.
glBindAttribLocation does not take effect until the program is
re-linked. In other words I was doing it wrong!
New code gets attrib locations from program, then remembers the attrib
-> location mapping for subsequent draw calls.
The program and VertexFormat are not modified (makes threading and reuse
easier).
There are older ways to give OpenGL hints about buffer invalidation, but
glInvalidateBufferData does exactly what we want. Use this function when
OpenGL 4.3 is available (Windows and proprietary Linux drivers).
Part of Gawain immediate mode.
When running blender --debug-gpu
Display which debug facilities are available. One of these, in order of preference:
- OpenGL 4.3
- KHR_debug
- ARB_debug_output
- AMD_debug_output
All messages are logged now, not just errors. Will probably turn some of these off later.
GL_DEBUG_OUTPUT_SYNCHRONOUS lets us break on errors and backtrace to the exact trouble spot.
Callers of GPU_string_marker no longer pass in a message length, just the message itself (null terminated).
Apple provides no GL debug logging features.
Old code had a mix of framebuffer error codes from OpenGL ES, EXT_framebuffer_object, and desktop GL. We use desktop GL (or ARB_framebuffer_object which acts just like GL 3.x) so I made it compatible with that.
Changed messages to the actual GL_FRAMEBUFFER_XXX symbols. These are less friendly and more accurate. Can easily look up what an error means, unfiltered by what a Blender dev thinks it means.
Kept ES error codes around in case we support that one day. Just flip the #if or use a compile-time option.
Replace legacy OpenGL with Gawain. Use shaders instead of fixed
function pipeline.
This simple UI element is shown at startup so is easy to verify things
are working. It also serves as a good example for people converting
other parts of the code.
Part of T49043
Use simple alternating colored lines instead of stippled overdraw.
Reimplement circ function to not use deprecated GLU (T49042). It also
leaves matrix stack untouched.
Remove unused circf function.
immBindBuiltinProgram extends Gawain’s immBindProgram to use Blender’s
library of built-in shader programs.
It uses imm prefix instead of GPU_ so people won’t be tempted to call
GPU_unbind_program() afterward.
From my understanding, Apache code is not allowed to call GPL code, so
this function needs to be in the GPU lib.
How to use:
1) set up vertex format
2) bind a shader
3) draw with immBegin … immEnd
4) unbind shader
TODO: expand this a little, so we can send uniform values to the bound
shader.
glMapBufferRange is a wonderful function that doesn’t exist on GL < 3.0.
Use the APPLE_flush_buffer_range extension on Mac. It offers several of
glMapBufferRange’s benefits.
Use older “black arts” method to orphan VBOs when we are done with
them. In modern OpenGL this behavior is more obvious.
Add APPLE_flush_buffer_range to Mac requirements. Every GPU is
supported. T49012
Apple invented VAOs and exposes them via an extension in legacy GL.
Other platforms use at least GL 3.0 which has VAOs built in.
QUADS were removed from core profile but are useful for immediate-mode
drawing. We’ll have to implement our own QUAD drawing before switching
to core profile.
Immediate mode no longer leaves its internals bound after use. Part of
transition from a simple prototype app to non-simple Blender, which has
lots of other parts using OpenGL.
More ways to send values via immAttrib:
2D float vectors
3 & 4 component ubytes (for colors mostly)
New immVertex functions that act more like familiar glVertex. We’ll
find a balance between making this API convenient and keeping it small.
2f and 3f are enough for now.
ARB_framebuffer_object replaces several related EXT extensions. The ARB
version pulls GL 3 FBO features into GL 2.1, useful for Mac platform.
Its functions and enums have no ARB suffix so transition to modern GL
will be seamless!
Extension is checked at startup, so is guaranteed to be true at runtime.
Part of T49012
Mac’s OpenGL version is furthest away from our target of GL 3.2. This
commit brings Mac closer to other platforms, so that our shaders and
other code don’t diverge too much during development.
According to Apple’s OpenGL matrix these useful extensions are
available on all GPUs that will be able to run Blender 2.8.
Only checked in debug builds; we might need something more forceful.
Part of T49012
The first two of several new simple built-in shaders (will test these
before adding more). These are intended for the new immediate mode API,
but you can use them just like any built-in GPUShader.
Due to limitations on different platforms, shaders need to work with
GLSL versions 120, 130 and 150. Final Blender 2.8 will be pure #version
150.
Introducing an immediate mode drawing API that works with modern GL 3.2
core profile. I wrote and tested this using a core context on Mac.
This is part of the Gawain library which is Apache 2 licensed. Be very
careful not to pull other Blender code into these files.
Modifications for the Blender integration:
- prefix filenames to match rest of Blender’s GPU libs
- include GPU_glew.h instead of <OpenGL/gl3.h>
- disable thread-local vars until we figure out how best to do this
This implements Mac part of T49012.
Removed options for EGL, ES2, compatibility profile. None of these
exist on Mac platform.
Create a GL 3.2 core context when requested at build time. Old code
just pretended to support core profile.
Implements the Linux part of T49012.
Simplify the options for context creation. No options for legacy GL or EGL or ES2. Select 3.2 CORE or COMPATIBILITY profile at build time.
If that fails, use a GL 3.0 context. This keeps Mesa supported while we work on full 3.2 core elsewhere in the code.
This greatly simplifies the options for context creation. No options for
legacy GL or EGL or ES2. Select CORE or COMPATIBILITY profile at build
time.
OpenGL 3.2 core profile will be our final target on all platforms. Until
all our code is ready we can use 3.2 compatibility profile or "legacy"
GL 2.1 on platforms that don't support compatibility profile.
At the moment light shading in Blender is produced in viewspace. Apparently, that's why
shader nodes work with normals in camera space. But it is not convenient for artists.
The more convenient approach is implemented in Cycles where normals are represented in world space.
Blend4Web Team designed the engine keeping in mind shader parameters readability,
so normals are interpreted in world space as well. And now our users have to use some tweaks, like
empty node group with the name "Replace", which is replacing one input by another on the engine side
(replacing working configuration in Blender Viewport by the configuration that has the same behavior in the engine).
This patch adds the ability to switch to world space for normals and lamp vector in BI and Viewport.
This patch is very important to us and we crave to see this patch in Blender 2.7 because
it will significantly simplify Blend4Web material creation workflow.
{F315547}
{F315548}
Reviewers: campbellbarton, brecht
Reviewed By: brecht
Subscribers: homyachetser, Evgeny_Rodygin, AlexKowel, yurikovelenov
Differential Revision: https://developer.blender.org/D2046
The purpose of the patch is to replace deprecated glShadeModel.
To decrease glShadeModel calls I've set GL_SMOOTH by default
Reviewers: merwin, brecht
Reviewed By: brecht
Subscribers: blueprintrandom, Evgeny_Rodygin, AlexKowel, yurikovelenov
Differential Revision: https://developer.blender.org/D1958
Note that this only removes the actual dependencies of Cycles on the
particle code in Blender, but not the internal "particle" definition
or the curve type handling inside Cycles. These structures may be in need
of some improvement themselves, but that is out of scope here.
This adds the possibility to edit a regular mesh like strand data.
It's more of a test for independence from particles than a real use case,
but could come in handy anyway.
There are a lot of cases here where deciding for removal is a bit tricky.
Many features have options for "use_particles" and similar settings. Only
features which actually store a particle object reference or work on actual
particle data have been removed.
Based on the ray casting technique described here: http://www.joesfer.com/?p=84
Volume samples currently are not bound to mesh deformation in any way, they are
simple object-space locations. Potentially a harmonic weight approach as in
mesh cages could be used.
Currently strand edit mode tool use the object data 'x mirror' flag.
This flag is only available on mesh objects, but the strand editing
can be used for dupli override caches etc. as well. Eventually strand
editing should get it's own independent flag to avoid this problem.
separate file.
This may seem a bit like overkill, but it helps ensure that no particle
depedencies messes up the strand editing code. The same will be done for
other use cases of the strand editing code in the future.
Note that currently this has virtually no effect, because the mirror
option relies on exact positions of vertices, which does not happen with
random hair placement (the add brush has no mirror option yet).
Eventually topological mirroring should help with this case, but is not
implemented for either old or new strand edit yet.
These are a modified version of their BMEditMesh counterparts.
use_topology is not yet implemented for strands. Native strand topology
is not very useful for this. Instead, the topology of the scalp mesh
should be used for finding mirrored strand roots, then the arc- or
parametric length of a vertex from the root to find mirrored verts.
Conflicts:
source/blender/blenkernel/BKE_editstrands.h
When copying mesh data to bmesh the MVERT and similar customdata types
have to be omitted. Otherwise the bmesh instance ends up with NULL
pointers in customdata layers, but entries in the typemap != -1. The
effect was that when storing new steps after one or more undo, the
resulting original data would be copied, and subsequent undo steps
are ignored.
data masks explicitly.
A dummy mesh is used for strand edit undo storage like in mesh edit
to prevent unnecessary code duplication. However, when copying from/to
BMesh only the mesh data layers are copied by default, omitting the new
data layers for strands (currently only MSurfaceSample hair root data).
This uses the generalized undo stack system which is also used for
object data edit. An extension is necessary to tell the undo functions
which object is specifically used for generating undo data and
identifying the stack, since strand editing does not edit the obdata
itself.
consistent segment lengths when transforming vertices.
Warning: The implementation is not correct yet, but all the steps should
be there.
The main idea is to treat strands as a sequence of joints that are
displaced out of their original locations by a transform or other tool.
The solver then tries to find a global per-strand solution that keeps
the segment lengths unmodified, with a minimum change in angles from
the original starting shape. Such a solution is much more usable and
efficient than the current O(n^2) attempt of "spreading the error"
across the strand.
The inverse kinematics method is very flexible. It can also include
stretching, which would be very welcome for features like the length
tool. Different parts of the strand could be weighted separately using
scaling factors for the angle/stretch parameters.
Conflicts:
source/blender/physics/intern/implicit.h
mode.
This method is simple, but not really very usable. It works by
successively relaxing segments that are too long or too short, moving
both vertices along the edge between them. This is repeated N^2 times
(N: number of vertices on the strand).
A true IK solver could give a lot better results, as well as providing
many opportunities to apply weighting for targets (e.g. preferring to
move non-selected over selected vertices). Many different methods for
simple IK solvers exist, so there should be one that works well for
large number of simple strands. See e.g.
http://www.math.ucsd.edu/~sbuss/ResearchWeb/ikmethods/iksurvey.pdf
vertex positions.
This works a lot better with strokes perpendicular to the general hair
strand direction. With the previous comb tool such strokes would only
make a small dent in the hair curve and then vertices would slip out
of the tool circle. The edge combing affects the local direction of
strands, which acts as a kind of grabbing functionality by moving
further vertices in front of the tool circle. The result is that
drawing a curvy hair shape with the comb becomes much easier.
In addition, the new tool also uses edge filtering and weighting rather
than vertices. This means that small brushes also work well, instead
of having no effect when hitting the edge segments between vertices.
Further improvement could be achieved later by using a global strand
solver, which adjusts vertex positions based on an error metric along
the whole of the strand.
direction vector for the hair stroke tool.
This is necessary for directional tools such as combing, where the
stroke direction can lead to unwanted results if it changes too
abruptly.
The rationale behind this is that the BKE code could be used for
modeling hair and fur as well as a number of other features such as
grass. The primary addition to BMesh is the limitation to strand-like
topology (simple vertex chains, optionally rooted on a mesh surface).
The editor code OTOH is quite hair specific, since the result should
be suitable for hair simulation, and the workflow should mimick actual
hair grooming intuitively. Eventually the hair edit mode could become
a generalized strand edit mode with slightly different tool sets for
various purposes, but for now it is quite specifically built for hair.
Conflicts:
source/blender/blenkernel/CMakeLists.txt
source/blender/blenkernel/intern/particle.c
drawing code for edit mode.
The lighting uses the same method as the particle hair, interpreting
strand direction as the normal. This is nowhere near realistic hair
shading, but doing this with line shading alone in the fixed-function
pipeline is probably not possible. A GLSL shader could be used instead
for a more realistic alternative as part of the viewport project. At
least this simple shading mode gives some orientation feedback while
editing hair.
Currently uses the same approach as old particle edit mode (rescale
hair segments from the root on). A more sophisticated approach using
least-square error minimization of the displacement could yield better
results.
Stroke tools will be categorized by the hair elements they operate on:
vertices, segments or strands (roots). In addition to that a filter
function defines the influence of the brush. This should be defined by
the other brush settings and be largely independent of the main tool
mode.
This requires converting the old messy particle num/num_dmcache/fuv/foffset
data into the new mesh samples, which can potentially introduce floating
point errors and inaccuracies due to lack of face index mapping in the
new system. However, in any well-constructed particle system the hair
roots should be nearest to their num face, so mapping would be accurate
enough. If necessary face index data could be added to samples as a
legacy code hack, but probably it's best to eventually replace the
hair system as a whole anyway.
Currently particles only have a single weight value, controlling
pinning in the simulation (for root and virtual root verts) and goal
force scaling. This will be replaced by a full vertex group weight
system eventually.
This is more for testing purposes, since currently there is only a
single mass property for the psys as a whole. This should change in the
future though, to allow variable mass per strand or vertex.
Conflicts:
source/blender/bmesh/intern/bmesh_interp.c
Hair/Strand editing will only use a subset of the bmesh topology and
expect a specific topology that needs to be verified and enforced.
However, this extra requirement is much less work than reimplementing a
whole edit data system with the same feature set as bmesh and avoids
much redundant code.
Conflicts:
source/blender/blenkernel/intern/customdata.c
source/blender/makesdna/DNA_customdata_types.h
This means using mempools to store curve and vertex data, which allows
arbitrary addition and removal of data more easily. Also this includes
an iterator system similar to bmesh iterators (although the simpler
topology makes it a lot less complex).
Conflicts:
source/blender/blenkernel/intern/customdata.c
source/blender/makesdna/DNA_customdata_types.h
particle hairs remain visible.
Note that currently the hair root location (num/num_dmcache, fuv, foffset)
is not stored from edit data, so all hairs end up in a default location.
This makes it work more like editmesh, and avoid the awkward and
basically bad-level approach in particles, where the edit data is an
anonymous pointer in particle systems together with a callback for
freeing.
Conflicts:
source/blender/blenkernel/CMakeLists.txt
sampling system to keep the code simple.
Now there is a MSurfaceSampleStorage struct that encodes the storage
details, which the algorithms don't have to care about.
This code is not yet used by any feature in master, but has proved very useful in the Gooseberry branch and several WIP patches. Inclusion into master was requested to avoid diverging code in branches and get part of the Gooseberry code merged early on.
The core idea is to have a common way of identifying points on mesh surfaces. Efficient evaluation of such points after deformation and mappable modifiers (e.g. subdivision) tracks positions, normals and other surface attributes. This is used extensively in the particle/hair systems and could be useful for certain tools, duplicators, etc.. Currently the particle systems in particular are very fragile and succeptible to mesh changes because of the unreliable way mesh surface mapping is stored. While the new system at this point uses essentially the same method, it at least provides a centralized DNA type that can be improved easily without too much effort and compatiblity issues.
In addition to evaluating surface samples the system also provides a central place to implement surface sampling algorithms, such as random sampling, ray casting, paint-like tools, etc.
Differential Revision: https://developer.blender.org/D922
sampling system to keep the code simple.
Now there is a MSurfaceSampleStorage struct that encodes the storage
details, which the algorithms don't have to care about.
COMMAND${CMAKE_COMMAND}-Ecopy"${PYTHON_OUTPUTDIR}/python35${PYTHON_POSTFIX}.lib"${BUILD_DIR}/python/src/external_python/run/libs/python35.lib#missing postfix on purpose, distutils is not expecting it
COMMAND${CMAKE_COMMAND}-Ecopy"${PYTHON_OUTPUTDIR}/python35${PYTHON_POSTFIX}.lib"${BUILD_DIR}/python/src/external_python/run/libs/python35${PYTHON_POSTFIX}.lib#other things like numpy still want it though.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
