Animation: Fix operator properties for redo panel
After the redo panel is added to animation editors in D14960, many operators
must be adjusted to appear and function correctly.
A full list of changes is tracked in T98195
---
This patch only includes actual usability fixes. It does not do any changes for the user's convenience, like adding other helpful properties to operators. This can be done in a follow-up patch.
Reviewed By: sybren
Maniphest Tasks: T98195
Differential Revision: https://developer.blender.org/D14977
Animation: Add redo panel to Dopesheet and NLA
---
Also implicitly adds it for the timeline editor, since it's a kind of action editor internally.
This feature is needed for changing advanced properties of animation operators, such as select grouped (see D14811).
But it can also be useful for existing operators, like precise keyframe position tweaking.
Changes are basically the same as in D6286 (which added the redo panel for Graph Editor).
Some operators have internal properties that should be hidden. A full list can be found in T98195. These will be fixed in a follow-up patch.
{F13079611} {F13079612}
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D14960
Reference images in the reference_override_dir will be chosen before
images in reference_dir. This allows platform specific reference
images, with a common base.
Ignored when set to None. The caller is responsible
of setting the reference override dir as the unit test is more aware
what the definition of a platform is.
Patch adds `gpu.platform.device_type_get` function to get the device
type that blender has detected.
Reviewed By: brecht
Maniphest Tasks: T99046
Differential Revision: https://developer.blender.org/D15265
The new OBJ/MTL importer was creating a new image for any referenced
texture, even if another material (or another property of the same
material) already referenced the same texture. Make it use
BKE_image_load_exists function just like Collada or USD importers do.
Fixes T100075. Extended test coverage to count imported images;
without the fix import_cubes_with_textures_rel would have incorrectly
created 5 images instead of 4.
Use a smaller arrow text character as menu item separator.
See D15578 for examples and details.
Differential Revision: https://developer.blender.org/D15578
Reviewed by Julian Eisel
There's been a handful of reports where "obviously" not a UDIM filenames
were detected as such during image open.[1]
This change makes the detection less aggressive by enforcing that the
4-digit sequence be delineated on both sides by one of the following 3
characters ., -, _
This fixes the problem for such filenames as:
"screenshot-1080p.png", "Image-1920x1080.png", "(1999) Photo.png", and
"antiguaChestnut_X_1240Wx814H.png"
[1] T97366 T98918 T99154 T100035
Differential Revision: https://developer.blender.org/D15573
This is a port of sculpt-dev's `SculptVertRef` refactor
(note that `SculptVertRef was renamed to PBVHVertRef`)
to master. `PBVHVertRef` is a structure that abstracts
the concept of a vertex in the sculpt code; it's simply
an `intptr_t` wrapped in a struct.
For `PBVH_FACES` and `PBVH_GRIDS` this struct stores a
vertex index, but for `BMesh` it stores a direct pointer
to a BMVert. The intptr_t is wrapped in a struct to prevent
the accidental usage of it as an index.
There are many reasons to do this:
* Right now `BMesh` verts are not logical sculpt verts;
to use the sculpt API they must first be converted to indices.
This requires a lot of indirect lookups into tables, leading to performance
loss. It has also led to greater code complexity and duplication.
* Having an abstract vertex type makes it feasible to have one unified
temporary attribute API for all three PBVH modes, which in turn
made it rather trivial to port sculpt brushes to DynTopo in
sculpt-dev (e.g. the layer brush, draw sharp, the smooth brushes,
the paint brushes, etc). This attribute API will be in a future patch.
* We need to do this anyway for the eventual move to C++.
Differential Revision: https://developer.blender.org/D14272
Reviewed By: Brecht Van Lommel
Ref D14272
Instead of specifying which symbols to hide, we hide all and make a few
visible. Some users may be relying on calling internal Blender functions,
but Windows is already hiding all of them and this is just not supported.
Fixes T99900: crash with some third-party Python libraries since OneAPI
Ref T76442
Differential Revision: https://developer.blender.org/D14971
Adds `rna_path.cc` and `RNA_path.h`.
`rna_access.c` is a quite big file, which makes it rather hard and
inconvenient to navigate. RNA path functions form a nicely coherent unit
that can stand well on it's own, so it makes sense to split them off to
mitigate the problem. Moreover, I was looking into refactoring the quite
convoluted/overloaded `rna_path_parse()`, and found that some C++
features may help greatly with that. So having that code compile in C++
would be helpful to attempt that.
Differential Revision: https://developer.blender.org/D15540
Reviewed by: Brecht Van Lommel, Campbell Barton, Bastien Montagne
Checking arm64 assembly support before CUDA/Metal would cause NVCC to
generate inline arm64 assembly.
Differential Revision: https://developer.blender.org/D15569
While this was not a critical issue (that lib pointer is only used for
some kind of sanity check that no linked data uses local ID pointers),
better to keep `IDP_BlendReadLib` in sync with all other lib-linking
code.
This patch implements the necessary changes to the GPU module that are
needed by the realtime compositor.
A new function GPU_material_from_callbacks was added to construct a GPU
material from a number of callbacks. A callback to construct the
material graph by adding and linking the necessary GPU material nodes.
And the existing code generator callback. This essentially allows the
construction of GPU materials independent of node trees and without the
need to do any node tree localization.
A new composite source output to the code generator was added. This
output contains the serialization of nodes that are tagged with
GPU_NODE_TAG_COMPOSITOR, which are the nodes linked to the newly added
composite output links.
Two new GPU uniform setters were added for int2 and matrix3 types.
Shader create info now supports generated compute sources.
Shaders starting with gpu_shader_compositor are now considered part of
the shader library.
Additionally, two fixes were implemented. First, GPU setter node
de-duplication now appropriately increments the reference count of the
references resources. Second, unlinked sockets now get their value from
their associated GPU node stack instead of the socket itself.
Differential Revision: https://developer.blender.org/D14690
Reviewed By: Clement
Currently, draw engines are not notified of view updates if a render
engine is active and was updated. It is unclear why this is the case
currently, but this behavior was part of the initial commit.
This patch propagates view updates regardless if the update was handled
by an active render engine. This is needed by the realtime compositor as
it implements logic for view updates, which currently does not execute
if Cycles is rendering for instance.
Differential Revision: https://developer.blender.org/D15207
Reviewed By: Brecht
Replace our existing two fonts with a stack of new fonts to increase
and improve language coverage and to add many new symbols and icons.
Covers glyphs of top 44 languages - 1.5 billion more potential users.
See D10887 for lots of details.
Differential Revision: https://developer.blender.org/D10887
Reviewed by Brecht Van Lommel
Allow FontBLFs to exist with NULL FT_Face, added only when actually
needed. Speeds up startup and unused fonts are not loaded.
See D15258 for more details.
Differential Revision: https://developer.blender.org/D15258
Reviewed by Brecht Van Lommel
Optimize font drawing by skipping empty strings.
See D15472 for more details.
Differential Revision: https://developer.blender.org/D15472
Reviewed by Campbell Barton
This is a quite interesting case, where two arguments to a function are
evaluated in different order on Apple Clang than on GCC and I guess
MSVC. Left a comment on that.
There was already a utility to retrieve the correct node group idname
from the context, `node_group_idname`, but often it's clearer to
use lower-level arguments, or the context isn't accessible.
Storing the group idname in the tree type makes it accessible
without rewriting it elsewhere.
* OneAPI: remove separate float3 definition
* OneAPI: disable operator[] to match other GPUs
* OneAPI: make int3 compact to match other GPUs
* Use #pragma once
* Add __KERNEL_NATIVE_VECTOR_TYPES__ to simplify checks
* Remove unused vector3
This reverts commit e2c02655c7. It was already
reverted in the 3.2 branch, as it caused more serious issues than it solved.
Fixes T99805, T99323, T99296.
The new implementation leverage compute shaders to reduce the
number of passes and complexity.
The max blur amount is now detected automatically, replacing the property
in the render panel by a simple checkbox.
The dilation algorithm has also been rewritten from scratch into a 1 pass
algorithm that does the dilation more efficiently and more precisely.
Some differences with the old implementation can be observed in areas with
complex motion.
This removes the quirk of having to call the sync function for each new
render loop.
# Conflicts:
# source/blender/draw/engines/eevee_next/eevee_view.cc
New `oldnewmap_lib_insert` does nothing special, it just wraps around existing
`oldnewmap_insert`, but it's the logical counter part of `oldnewmap_liblookup`.
It also helps tremendously when debuging complex ID pointers issues in
readfile.c code.
Crash would happen when a linked ID would become missing, that was
'pre-declared' and used only once as a 'weak link' in another library
stored before the one it came from.
In that case, the place-holder generated in read code would be freed in
`read_library_clear_weak_links`, when handling its 'owner' library, but
since all previous libraries in the list had already been 'lib_linked'
and their filedata (and related libmap) freed, the update of the libmaps
in `read_library_clear_weak_links` would not apply to data from those
previous libraries, leading to ID pointers there pointing to freed
memory.
This fix should also be backported to 2.93.
The Python based importer had a special case handling of "no faces in
the whole file at all", where it ended up treating the whole file
as essentially a point-cloud-like object (just loose vertices, no
faces or edges). The new importer code was missing this special case.
Fixes T100017. Added gtest coverage that was failing without the fix.
Only nodes supporting lazyness can mark inputs as unused. For other
nodes, this is done automatically of all outputs are unused.
Differential Revision: https://developer.blender.org/D15409
When plotting equally distant points around a circle support an extra
axis of symmetry so twice as many exact values are repeated than
originally added in [0], see code-comments for a detailed explanation.
Tests to ensure accuracy and exact symmetry have been added too.
Follow up on fix for T87779.
[0]: 087f27a52f
When plotting equally distant points around a circle support an extra
axis of symmetry so twice as many exact values are repeated than
originally added in [0], see code-comments for a detailed explanation.
Tests to ensure accuracy and exact symmetry have been added too.
Follow up on fix for T87779.
[0]: 087f27a52f
Simplifies intersection code a little and slightly improves precision regarding
self intersection.
The parametric texture coordinate in shader nodes is still the same as before
for compatibility.
This was removed in cacdea7f4a to fix a bug, but copying point
and curve attributes should be fine as long as the attribute arrays are
retrieved before-hand.
Differential Revision: https://developer.blender.org/D15541
The problem was that zero-sized and non-existant attributes were
handled the same in some parts of the attribute API, which led to
unexpected behavior.
The solution is to properly differentiate the case when an attribute
does not exist and when it is just empty (because the geometry
is empty).
Differential Revision: https://developer.blender.org/D15557
* BLENDER_VERSION_CYCLE set to beta
* Update pipeline_config.yaml to point to 3.2 branches and svn tags
* Update and uncomment BLENDER_VERSION in download.cmake
This name doesn't require understanding of fields, and
is phrased as an action which is consistent with other nodes.
Discussed in the latest geometry nodes sub-module meeting.
This adds three new nodes:
* `Shortest Edge Paths`: Actually finds the shortest paths.
* `Edge Paths to Curves`: Converts the paths to separate curves.
This may generate a quadratic amount of data, making it slow
for large meshes.
* `Edge Paths to Selection`: Generates an edge selection that
contains all edges that are part of a path. This can be used
with the Separate Geometry node to only keep the edges that
are part of a path. For large meshes, this approach can be
much faster than the `Edge Paths to Curves` node, because
less data is created.
Differential Revision: https://developer.blender.org/D15274
Add a version of #BKE_main_namemap_validate that also fixes the issues,
and call it in a do_version to fix recent .blend files saved after the
regression introduced in rB7f8d05131a77.
This is mandatory to fix some production files here at the studio, among
other things.
The function to rearrange channels only works for F-curves channels for now, adding the `FCURVESONLY` filter prevents the function to be called for grease pencil channels, thereby fixing the crash.
Reviewed by : sybren
Differential Revision: http://developer.blender.org/D15504
Add a util function to check that content of a given Main and the
namemaps in it are consistent.
Add some asserts calling this check after file read, and after some
override operations.
The previous order was based on the order of when the tools were
developed. Instead we now cluster them based on similar functionality:
* Selection
* Add/Remove
* Deform/Transform
* Annotation
Done in collaboration with Pablo Vazquez.
Liboverrides are doing some very low-level manipulation of IDs in apply
code, to reduce over-head of name and sorting handling.
This requires specific care to ensure thatr the new namemap runtime data
remains up-to-date and valid. Otherwise, names of existing IDs would be
missing from the map, which would later lead to having several different
IDs with the same name. Critical corruption in Blender ID management.
Reported by animators at the Blender studio.
Regression from rB7f8d05131a77.
A mistake in the 0dcee6a386 which made specific driven visibility
to work, but did not properly handle actual time-based visibility.
The basic idea of the change is to preserve recalculation flags of
nodes which were tagged for update but were not evaluated due to
visibility constraints. In the file from the report this makes it
so tagging which is done first time ID is in the dependency graph
are handled when the ID actually becomes visible. This is what
solved the root of the problem from the report: there was missing
geometry update since it was "swallowed" by the evaluation during
the object being invisible. In other configurations this change
allows to handle pending geometry updates due to animated modifiers
be handled when object becomes visible without time change.
This change also solves visibility issue of the synchronization
component which also started to be handled badly since the
previous fix attempt. Basically, the needed exception in its
visibility handling did not happen and a regular logic was used
for it.
Tested with files from the T99733, T99976, and from the Heist
project.
Differential Revision: https://developer.blender.org/D15544
The number of Execution Units and resident "threads" (simd width * threads
per EUs) are now exposed and used to select the number of states using
a simplified heuristic.
It was never added for the field on domain and field at index nodes.
They need special handling because they have many what should be
a multi-type socket declaration.
This patch adds a `mute` RNA property on `ActionGroup`s that allows them to be easily muted/unmuted from python.
This uses the existing `AGRP_MUTED` flag which was also accessible from the user interface.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D15329
To keep consistency is better add the word `Inactive` for `Fade Layers` and `Fade Objects` to keep the same naming used in other areas of the overlay panel.
Reviewed by: Matias Mendiola
This commit fixes the opacity for curves hiding the option.
Actually, the curve points and handles drawing is using the same code that mesh curves and the opacity is not supported. While this feature will be added for mesh curves and gpencil, now it's better to hide this option.
Reviewed: Matias Mendiola
Note: The handle problem reported in this task was fixed in a separated commit: 203e7ba332
Previously there was a special extraction process for "vertex colors"
that copied the color data to the GPU with a special format. Instead,
this patch replaces this with use of the generic attribute extraction.
This reduces the number of code paths, allowing easier optimization
in the future.
To make it possible to use the generic extraction system for attributes
but also assign aliases for use by shaders, some changes are necessary.
First, the GPU material attribute can now store whether it actually refers
to the default color attribute, rather than a specific name. This replaces
the hack to use `CD_MCOL` in the color attribute shader node. Second,
the extraction code checks the names against the default and active
names and assigns aliases if the request corresponds to a special active
attribute. Finally, support for byte color attributes was added to the
generic attribute extraction.
Differential Revision: https://developer.blender.org/D15205
Changing the value doesn't accomplish anything, since the retrieved
value would be the same for every index then. So it's best to hide it
to make the node clearer.
* OpenEXR 3.1.4 -> 3.1.5, this fixes several issues OSS fuzz found.
* libtiff 4.3.0 -> 4.4.0, this fixes several CVE's.
This also converts the harvest of libtiff on windows to a post install handler,
there's a few left but Windows is getting close to being harvest free.
Differential Revision: https://developer.blender.org/D15478
This is a refresh of our current FFmpeg 5.0.0 (unchanged) version with the
following changes:
* libvpx all platforms: enable SSE3/4/AVX/AVX2 instruction sets. libvpx has a
proper CPUID check in place and will not call the faster kernels unless it is
sure the CPU supports it. So we can safely enable this, this partially
resolves T95743 (completely on Linux and macOS).
* libvpx Windows - threading was disabled due to a shared dependency on
libwinpthreads.dll which we prefer not to distribute. However when configure
cannot find pthreads it will happily fall back on a win32 threads based
emulation layer. This also resolves the final part of T95743.
* libaom-av1 - new dependency required for D14920, this is a somewhat odd
dependency, it's cmake based, but still needs the perl environment setup, so
we have to setup the env and call cmake our selves for the configure, build
and install commands. This dep has the same libwinpthreads issue as vpx on
Windows, however since it's cmake based, it's easier to prevent cmake from
detecting it.
Differential Revision: https://developer.blender.org/D15399
The Graph, Driver, and Dopesheet's (and sub modes) properties panel
(N-Panel) are now open by default. This includes the editors in the
default Animation workspace.
Note that, because the Timeline is implemented as a special mode of the
Dopesheet, switching between Timeline and Dopesheet will *not* change
the visibility of the properties panel.
Maniphest Tasks: T97980
Differential Revision: https://developer.blender.org/D14910
This reverts the Flex-related parts of commit
rBef268c78933079137288e326704431432adf9ad9, as those caused a build
error on CentOS 7 (which is used for the precompiled Linux libraries).
CentOS 7 only has Automake 1.13, whereas after this commit version 1.15
seems to be required.
Since in its patch description (D15319) it's mentioned that this
"probably doesn't warrant changing", and it's actually blocking the
build of the precompiled libraries for Blender 3.3 now, I'll revert the
Flex-related part of the commit.
`parallel_invoke` allows executing functions on separate threads.
However, creating tasks in tbb has a measurable amount of overhead.
Therefore, it can be benefitial to disable parallelization when
the amount of work done per function is small.
See D15539 for some benchmark results.
Differential Revision: https://developer.blender.org/D15539
The stroke points were changed but the bounding box calculation was not done and this produced a problem in any bounding box check done by different tools.
Any script that raised a SystemExit called by --python, --python-expr
command line args or by executing the text block would exit without
printing a message. This caused the error from T99966 to be hidden.
Add explicit handling for SystemExit to ensure the message is always
shown before exiting.
More details noted in code-comments.
float8 is a reserved type in Metal, but is not implemented. So rename to
float8_t for now.
Also move back intersection handlers to kernel.metal, they can't be in the
class that encapsulates the other Metal kernel functions.
The issue was introduced by rBad5e3d30a2d2 which made possible to use
unbounded elevation angle.
In order to not touch the shading code, we just remap the value to the
expected range the shading code expects. This means that elevation angles
above +/-PI/2 effectively flip the sun rotation angle.
There is a 1 pixel error in the size registered for the buffer
dimensions.
NOTE: This issue indicates that the texture scale is different from the
region, so the mouse-based coordinates used are actually misaligned.
This misalignment will be fixed in another commit.
Regression probably introduced in rB1d49293b8044 + rB45f167237f0c8
The "snap to surface" operators now have "disabled" poll messages
when there is no surface object.
The implementation in most curves operators is also unified.
The goal is to avoid having to define and use the poll failure messages
in multiple places, to reduce the boilerplate that tends to be
necessary to add an operator, and to increase the likelihood that
operators are implemented with proper poll messages.
Differential Revision: https://developer.blender.org/D15528
This was tested in some places to check if code was being compiled for the
CPU, however this is only defined in the kernel. Checking __KERNEL_GPU__
always works.
This patch adds required math functions for float8 to make it possible
using float8 instead of float3 for color data.
Differential Revision: https://developer.blender.org/D15525
Having the OptiX/MetalRT/Embree/MetalRT implementations all in one file with
many #ifdefs became too confusing. Instead split it up per device, and also
move it together with device specific hit/filter/intersect functions and
associated data types.
All our intersections functions now work with unnormalized ray direction,
which means we no longer need to transform ray distance between world and
object space, they can all remain in world space.
There doesn't seem to be any real performance difference one way or the
other, but it does simplify the code.
This fixes two issues:
* There was a crash when the new attribute name was empty.
* The attribute name was incremented (e.g. "Attribute.001") when
the old and new name were the same.
Proposed solution by @scurest The color attribute in the RNA was tagged as
COLOR_GAMMA. This change will change it to a regular COLOR.
{F13217692}
Reviewed By: joeedh, jbakker
Maniphest Tasks: T99036
Differential Revision: https://developer.blender.org/D15272
It looked up the vertex group index based on the object instead of the
actual mesh that is currently used. Since geometry nodes, the number
and order of attributes can change in arbitrary ways during evaluation.
Therefore, this index has to be looked up on the mesh which contains
the most up-to-date information.
There are probably similar issues in other modifiers. That has to be
fixed step by step. Ideally by using the attribute api directly eventually.
When dragging assets into the 3D View while in any other mode than
object mode, dropping would be disabled and the cursor would indicate
that. However there was supposed to be an "Only supported in object
mode" message, that similar operators showed, but got forgotten when
this one was introduced.
UV maps that are used for surface attachment must not have overlapping
uv islands, because then the same uv coordinate would correspond to
multiple surface positions.
Ref T99936.
Calling two non-const methods on a `MutableAttributeAccessor`
at the same time in multiple threads is not safe.
While I don't know what caused the crash here exactly, I do know
that it happens while looking up the attribute for writing, which
may modify the unterlying geometry. I couldn't reproduce the
bug with a debug build or without threading.
When texture painting a lot of time is spent in ED_image_paint_tile_find.
This fixes stores the PaintTiles in a blender::Map making ED_image_paint_tile_find an O(1) rather than O(n) operation.
When using threading the locking should happen during read as well,
still this gives a boost in performance as the read is now much faster.
Reviewed By: jbakker
Maniphest Tasks: T99546
Differential Revision: https://developer.blender.org/D15415
In a test producing 10 million vertices I observed a 3.6x improvement,
from 470ms to 130ms. The largest improvement comes from calculating
each mesh array on a separate thread. Besides that, the larger changes
come from splitting the filling of corner and face arrays, and
precalculating sines and cosines for each ring.
Using `parallel_invoke` does gives some overhead. On a small 32x16
input, the time went up from 51us to 74us. It could be disabled
for small outputs in the future. The reasoning for this parallelization
method instead of more standard data-size-based parallelism is that the
latter wouldn't be helpful except for very high resolution.
As discussed, this only updates objects in and the world of the scene to which the view layer belongs, which also avoids the problem of not having a BMain available.
Differential Revision: https://developer.blender.org/D14740
The Alembic importer uses a linear search over the mesh edges to find
the right edge when setting edge creases. Although the complexity is
`O(m * n)`, with `m` being the number of creased edges, and `n` being
the number of edges, this can lead to a quadratic complexity as `m`
approches `n`.
This patch uses `EdgeHash` to store and retrieve the edges, which
should bring complexity closer to `O(n)`, provided that lookup is
`O(1)`.
See differential for some timings. In most files, this is expected
to give at least a 2-3x speedup for this operation, but can lead
orders of magnitude speed increase for dense meshes with a significant
number of edge creases.
Differential Revision: https://developer.blender.org/D15521
Use the C++ API to implement more of the existing C functions.
This corrects the cases where one tries to add a builtin attribute
with the wrong domain or type on curves, though a better warning
message would be helpful in the future, and also reduces duplication
of the internal logic. Not much more is possible without changing
the interface.
The display depth is used to composite Gpencil and Overlays. For it to
be stable we bias it using the dFdx gradient functions. This makes
overlays like edit mode not flicker.
The previous approach to save the 1st center sample does not work anymore
since we jitter the projection matrix in a looping pattern when scene
is updated. So the center depth is only (almost) valid 1/8th of the times.
The biasing technique, even if not perfect, does the job of being stable.
This has a few cons:
- it makes the geometry below the ground plane unlike workbench engine.
- it makes overlays render over geometry at larger depth discontinuities.
This might make the image a bit blurier but it reduces the flickering of
shiny surfaces during animation.
This uses the technique described in "High Quality Temporal Supersampling"
by Brian Karis at Siggraph 2014 (Slide 45): Reduce the exponential factor
when the history is close the bounding box border.
A few offsets were missing.
Reminder that this does not change the actual render resolution but it
reduces the VRAM consumption of accumulation buffers.
Use the new attribute API to implement the attribute remove function
used by RNA, except for BMesh attributes. Currently, removing curve
attributes from the panel in the property editor does not mark the
relevant caches dirty (for example, the cache of curve type counts),
because that behavior is implemented with the new attribute API.
Also, eventually we want to merge the two APIs, and removing an
attribute is the first function that can be partially implemented
with the new API.
Differential Revision: https://developer.blender.org/D15495
The face merging code in exact boolean made an assumption that
the tesselated original face was manifold except at the boundaries.
This should be true but sometimes (e.g., if the input faces have
self-intersection, as happens in the example), it is not.
This commit makes face merging tolerant of such a situation.
It might leave some stray edges from triangulation, but it should
only happen if the input is malformed.
Note: the input may be malformed if there were previous booleans
in the stack, since snapping the exact result to float coordinates
is not guaranteed to leave the mesh without defects.
This is the second try at this commit. The previous one had a typo
in it -- luckily, the tests caught the problem.
Previously, when creating "very large" (tens-hundreds of thousands)
amounts of objects, the Blender code that was ensuring name
uniqueness was the bottleneck. That got recently addressed (D14162),
however now sorting of IDs by their names is the remaining bottleneck.
Name sorting code in Blender is optimized for the pattern where names
are inserted in already sorted order (i.e. objects expect to get added
near the end of the list). By doing this pre-sorting of objects
intended to get created by an importer (USD and OBJ, in this patch),
this sorting bottleneck can be largely removed, especially with very
high object counts.
Windows, Ryzen 5950X, import times:
- OBJ, splash screen scene (26k objects): 22.0s -> 20.7s
- USD, Disney Moana scene (250k objects): 585s -> 82.2s (10 minutes -> 1.5 minutes)
Reviewed By: Michael Kowalski, Howard Trickey
Differential Revision: https://developer.blender.org/D15506
Geometry nodes has added the ability to modify mesh vertex groups
during evaluation (see 3b6ee8cee7). However, the armature
modifier always uses the vertex groups from the original object.
This is wrong for the modifier stack, where each modifier is meant
to use the output of the previous.
This commit makes the armature modifier use the evaluated vertex groups
if they are available. Otherwise it uses the originals like before.
Differential Revision: https://developer.blender.org/D15515
This uses the exposure to get a better approximation of the perceptual
brighness of a sample before accumulating it.
Note that we do not modify exposure of the image. Only the samples weights
are computed differently.
The swaps during accumulation were ignored because of the way the
`SwapChain<>` implementation works.
Using external references and updating them fixes the issue.
Since fd5e5dac89, the node would remove the attribute before
adding it again, which lost the vertex group status of an attribute,
meaning they were written as arbitrary attributes.
Now, the node first tries to write to attributes with the same domain
and data-type, which covers the vertex group case. Then it falls back
to removing the attribute and adding it again. Even that can fail
though, so I added an error message to make that a bit clearer.
Differential Revision: https://developer.blender.org/D15514
Use the newer more generic sampling and interpolation functions
developed recently (ab444a80a2) instead of the `CurveEval` type.
Functions are split up a bit more internally, to allow a separate mode
for supplying the curve index directly in the future (T92474).
In one basic test, the performance seems mostly unchanged from 3.1.
Differential Revision: https://developer.blender.org/D14621
Previously, curves sculpt tools only worked on original data. This was
very limiting, because one could effectively only sculpt the curves when
all procedural effects were turned off. This patch adds support for curves
sculpting while looking the result of procedural effects (like deformation
based on the surface mesh). This functionality is also known as "crazy space"
support in Blender.
For more details see D15407.
Differential Revision: https://developer.blender.org/D15407
Simplify the transform code by bundling the TransData creation, Data
recalculation, and special updates into a single struct.
So similar functions and parameters can be accessed without special
type checks.
Differential Revision: https://developer.blender.org/D15494
Calculating shortest path selection in UV edge mode was done using vertex
path logic. Since the UV editor now supports proper edge selection [0],
this approach can sometimes give incorrect results.
This problem is now fixed by adding separate logic to calculate the
shortest path in UV edge mode.
Resolves T99344.
[0]: ffaaa0bcbf
Reviewed By: campbellbarton
Ref D15511.
The conversion from Curves to CurveEval used an incorrect type
for one of the builtin attributes. Also, an incorrect default was used
for reading the nurbs_weight attribute.
The value of number sliders (e.g. the "end frame" button) wrap around to
their pre-click value when dragging them for a very long distance (e.g.
by lifting the mouse off the desk and placing it back on to keep
dragging in the same direction).
The problem is X11-specific, and due to XTranslateCoordinates using a
signed int16 behind the curtains, while its signature and the rest of
Blender uses int32. The solution is to only use XTranslateCoordinates on
(0, 0) to get the delta between the screen and client reference systems,
and applying the delta in a second step.
Differential Revision: https://developer.blender.org/D15507
Actualy 'safe' building of the base has in view layers (as part of
`BKE_main_collection_sync_remap`) would only happen when there was
already an existing one, otherwise it was skipped, and rebuilt later
(without the support for doublons) in collection sync code.
Very odd that that error was never spotted before, issue in code has
been there for a long time already. Probably only happens in rare cases
(specific conjuction of factors during remapping of old ID into itelf
new id)?
Reported by @hjalti from Blender studio. Reproducing case:
`heist/pro/shots/050_alarm/050_0160/050_0160.anim.blend`, r1407
This was caused by the world volume shader needing placeholder textures
that were not available until cache populate begins.
Adding a check and creating on the fly fixes the issue.
Code handling read/write of libraries is still particular... but trying
to call `library_runtime_reset` on a random address at readtime was an
obvious mistake I should have caught during review :(
Regression from rB7f8d05131a77.
The spreadsheet can retrieve the float selection using the same
utilities as curves sculpt brushes. Theoretically this can work in
original, evaluated, and viewer node modes, at least when the
sculpt selection attributes are able to be propagated.
Differential Revision: https://developer.blender.org/D15393
The improvements over the old implementation are:
- Improved history reprojection filter (catmull-rom)
- Use proper velocity for history reprojection.
- History clipping is now done in YCoCg color space using better algorithm.
- Velocity is dilated to keep correct edge anti-aliasing on moving objects.
As a result, the 3x3 blocks that made the image smoother in the previous
implementation are no longer visible is replaced by correct antialiasing.
This removes the velocity resolve pass in order to reduce the bandwidth
usage. The velocities are just resolved as they are loadded in the film
pass.
When the cursor grabbing was disabled, Blender's internal location
(wmWindow.eventstate) kept the location before un-hiding.
This caused the paint cursor to show in the wrong location after
adjusting the color wheel for e.g.
Calling `finish` after writing to generic attributes is currently necessary for
correctness. Previously, this was easy to forget. Now there is a check for this
in debug builds.
The issue was that geometry nodes was run on the original curves,
and set a pointer to an evaluated material id on it. The fix is to not
mix up original and evaluated data by making sure that geometry nodes
does not modify the original data.
This commit allows to select several data-blocks in the outliner and
create overrides from all of them, not only the active one.
It properly creates a single hierarchy when several IDs from a same
hierarchy root data are selected.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D15497
The issue was caused by the fact that objects with driven or animated
visibility were considered visible by the dependency graph evaluation.
This change makes it so the dependency graph evaluation is aware of
visibility which might be changing. This is achieved by evaluating the
path of the graph which affects objects visibility and adjusts to it
before evaluating the rest of the graph.
There is some time penalty to this, but there does not seem to be a
way to fully avoid this penalty.
With the production shot from the heist project the FPS drops by a
tenth of a frame (~9.4 vs ~9.3 fps) when adding a driver to an object
which keeps it visible. Note that this is a bit hard to measure since
the FPS fluctuates quite a bit throughout the playback. On the other
hand, having a driver on a visibility of a heavy object from character
and setting visibility to false gives big speedup.
Also worth noting that there is no penalty at all when there are no
animated visibilities in the scene.
Differential Revision: https://developer.blender.org/D15498
The goal is to make it possible to evaluate the graph in multiple
passes without evaluating the same node multiple times.
Currently should not be any functional changes.
WM_event_type_mask_test checks assumed ISMOUSE macro worked for any
kind of mouse event when it only accepted buttons & motion.
Now ISMOUSE checks for any kind of mouse event,
use ISMOUSE_BUTTON/WHEEL/GESTURE for more specific checks.
The ISMOUSE macro was used in situations only button events
needed to be checked.
The only functional difference would be MOUSEMOVE events were
previously accepted for these checks.
Event handling and the enum definition documents MOUSESMARTZOOM
as a gesture however it wasn't accepted by ISMOUSE_GESTURE,
instead it was added to the ISMOUSE macro.
Move the type check to ISMOUSE_GESTURE.
Use the attribute API instead of the CustomData API, to correctly
handle anonymous attributes and simplify the code. One non-obvious
thing to note is that the type counts are recalculated by the "finish"
function of the `curve_type` attribute, so they don't need to be copied
explicitly. Also, the mutable attribute accessor cannot be an reference
if we want to give it an rvalue, which is convenient in this case.
The normals are transformed, but not used. It looks like this logic was
just copied from below where the mesh is transformed for creating
emitters, which do use vertex normals.
All callers passed `false` for this parameter, making it more confusing
than useful. If this functionality is needed again in the future, a separate
function should be added.
Differential Revision: https://developer.blender.org/D15401
Oversight in b0da080c2c. The `session_uuid` operator property wouldn't
be checked by the invoke callback, and if neither the `filepath` nor the
`name` property were set, the File Browser would open.
An implementation of T73412, roughly as outlined there:
Track the names that are in use, as well as base names (before
numeric suffix) plus a bit map for each base name, indicating which
numeric suffixes are already used. This is done per-Main/Library,
per-object-type.
Timings (Windows, VS2022 Release build, AMD Ryzen 5950X):
- Scene with 10k cubes, Shift+D to duplicate them all: 8.7s -> 1.9s.
Name map memory usage for resulting 20k objects: 4.3MB.
- Importing a 2.5GB .obj file of exported Blender 3.0 splash scene
(24k objects), using the new C++ importer: 34.2s-> 22.0s. Name map
memory usage for resulting scene: 8.6MB.
- Importing Disney Moana USD scene (almost half a million objects):
56min -> 10min. Name map usage: ~100MB. Blender crashes later on
when trying to render it, in the same place in both cases, but
that's for another day.
Reviewed By: Bastien Montagne
Differential Revision: https://developer.blender.org/D14162
- The custom space target never needs B-Bone data (used by depsgraph).
- When drawing the relationship lines use the space matrix directly.
- Don't use the custom target to control the target space type dropdown.
Differential Revision: https://developer.blender.org/D9732
Add calls to a few locations that look like they may need to
initialize the Custom Space matrix, i.e. generally any place
that computes target matrices.
Differential Revision: https://developer.blender.org/D9732
Refactor D14646 to use context.active_action for the Action
Custom Properties panel, matching the already existing Action panel.
This has the advantage that it allows access to the properties of
any actions with channels visible in the Dope Sheet, e.g. Shape Keys,
Materials etc; while using just the active object is limited to just
the object animation.
Also move both panels from Item to the Action tab.
Differential Revision: https://developer.blender.org/D15288
This commit fixes several issues in add-ons UI messages extraction code:
- In multi-file modules, the script would crash because it tried to write to
the dir instead of a `translations.py` file;
- The add-on message extraction works by enabling the add-on, getting all
messages; disabling the add-on, getting all messages; then comparing the
two message sets. But often a bug happens where a class gets a
description from somewhere else in memory. I couldn’t debug that, so a
workaround is to check that the message isn’t a corrupted one before
removing it;
- `printf()` doesn't exist in Python and would crash the script;
- `self.src[self.settings.PARSER_PY_ID]` can be replaced by `self.py_file`
in class `I18n`, since a property exists to do that;
- At one point a generator was printed instead of its values, so let's
unpack the generator to get the values. Maybe the print could be
deleted entirely;
- Use SPDX license identifier instead of GPL license block, to be more in
line with other scripts from the codebase.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15474
Adds a new option to the 'Delete ShpaKeys' operator, which first applies
the current mix to the object data, before removing all shapekeys.
Request from @JulienKaspar from Blender studio.
Reviewed By: JulienKaspar
Differential Revision: https://developer.blender.org/D15443
This commit removes the use of PolySpline for resampling curves and
replaces it with the length parameterization utility for that purpose.
I didn't test performance, but I would expect the shrinking to be
slightly faster because I reused some arrays to avoid allocating
them for every curve. I noted some potential improvements in
the "add curves" function.
Differential Revision: https://developer.blender.org/D15342
This commit ports the fillet curves node to the new curves data-block,
and moves the fillet node implementation to the geometry module to help
separate the implementation from the node.
The changes are similar to the subdivide node or resample node. I've
resused common utilities where it makes sense, though some things like
the iteration over attributes can be generalized further. The node
is now multi-threaded per-curve and inside each curve, and some buffers
are reused per curve to avoid many allocations.
The code is more explicit now, and though there is more boilerplate to
pass around many spans, the more complex logic should be more readable.
Differential Revision: https://developer.blender.org/D15346
These mutable pointers present problems with ownership in relation to
proper copy-on-write for attributes. The simplest solution is to just
remove them and retrieve the layers from `CustomData` when they are
needed. This also removes the complexity and redundancy of having to
update the pointers as the curves change. A similar change will apply
to meshes and point clouds.
One downside of this change is that it makes random access with RNA
slower. However, it's simple to just use the RNA attribute API instead,
which is unaffected. In this patch I updated Cycles to do that. With
the future attribute CoW changes, this generic approach makes sense
because Cycles can just request ownership of the existing arrays.
Differential Revision: https://developer.blender.org/D15486
Missing Ui refresh when property is accessed through shortcut.
Use RNA_def_property_update to solve this.
Differential Revision: https://developer.blender.org/D15431
Similar to snapping to the world origin in the 3D viewport. This can be found
in the Shift+S pie menu and UV > Snap menu.
Differential Revision: https://developer.blender.org/D15055
Create a transform conversion type that only considers the Vertex
Custom Data.
This reduces the complexity of converting Meshes and slightly
optimizes the transformation.
After becb1530b1 the new curves object type isn't hidden
behind an experimental flag anymore, and other areas depend on this,
so disabling curves at compile time doesn't make sense anymore.
Adding the `FCURVESONLY` filter in the filter function of the Grease
Pencil dopesheet prevents calls to F-curves related functions to grease
pencil channels, thereby fixing the crash.
Reviewed By: antoniov, sybren
Maniphest Tasks: T99732
Differential Revision: https://developer.blender.org/D15490
Instead of allocating a single 0 char, set the `char *` DNA pointer to
null. This avoids the overhead of allocating and copying single-bytes.
rBeed45b655c9f didn't do this for safety reasons, but I checked the
existing uses of this behavior in DNA/RNA. Out of 43 total `char *`
members, this change only affects 7 recently added properties.
For a complete list, see the patch description.
Differential Revision: https://developer.blender.org/D14779
Semantically it is more correct as the cache does not modify the ID.
There is need to do couple of const casts since the BKE (which is in C)
does not easily allow to iterate into f-curves of const ID.
Should be no functional changes.
Previously, things like materials, symmetry, and selection options
stored on `Curves` weren't copied to the result in nodes like the
subdivide and resample nodes. Now they are, which fixes some
unexpected behavior and allows visualization of the sculpt mode
selection.
In the realize instances and join nodes the behavior is the same as
for meshes, the parameters are taken from the first (top) input.
I also refactored some functions to return a `CurvesGeometry` by-value,
which makes it the responsibility of the node to copy the parameters.
That should make the algorithms more reusable in other situations.
Differential Revision: https://developer.blender.org/D15408
When a query begins, the current visibility result buffer needs to be
associated with the currently active Render Pass. The MTLContext and
MTLCommandBuffer are responsible for ensuring new render pass objects are
created if the visibility state changes.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D15356
The Nishita sky texture currently only allows moving the sun to the zenith.
The problem is if you want to animate the passing of a full night-day-night
cycle. Currently it's not easy to do due to this limitation.
The patch makes it so users can easily animate the sun moving from sunrise
to sunset by expanding the max sun elevation to go 360° instead of 90°.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D13724
No user visible changes expected.
Merges the tree row and grid tile button types, which were mostly doing
the same things. The idea is that there is a button type for
highlighting, as well as supporting general view item features (e.g.
renaming, drag/drop, etc.). So instead there is a view item button type
now. Also ports view item features like renaming, custom context menus,
drag controllers and drop controllers to `ui::AbstractViewItem` (the new
base class for all view items).
This should be quite an improvement because:
- Merges code that was duplicated over view items.
- Mentioned features (renaming, drag & drop, ...) are much easier to
implement in new view types now. Most of it comes "for free".
- Further features will immediately become availalbe to all views (e.g.
selection).
- Simplifies APIs, there don't have to be functions for individual view
item types anymore.
- View item classes are split and thus less overwhelming visually.
- View item buttons now share all code (drawing, handling, etc.)
- We're soon running out of available button types, this commit merges
two into one.
I was hoping I could do this in multiple smaller commits, but things
were quite intertwined so that would've taken quite some effort.
No user visible changes expected.
Similar to rBc355be6faeac, but for view items now instead of the view.
Not much of the item code is ported to use it yet, it's actually a bit
tricky for the most part. But just introducing the base class already
allows me to start unifying the view item buttons (`uiButTreeRow` and
`uiButGridTile`). This would be a nice improvement.
Fix the issue where undoing a "duplicate NLA strip" operation would
require two undo steps.
The cause of this was that the operator was not using the operator macro
system to combine both the duplication and the translate operators into
one. Instead, the old code was simply manually invoking invoking the
translate operator after the duplicate operator had completed.
This patch requires the default keymap to be modified to include the two
new macro operators, `NLA_OT_duplicate_move` and
`NLA_OT_duplicate_linked_move` in favour of the old keymap that simply
called `NLA_OT_duplicate` and passed along a `linked` argument.
`duplicate_move` and `duplicate_move_linked` are two different enough
operations to justify having their own operators from user's
point-of-view, especially since we cannot yet have different tool-tips
based on an operator's settings.
Reviewed By: sybren, mont29
Differential Revision: https://developer.blender.org/D15086
Add `FCurveKeyframePoints.clear()` method to delete all keyframe points
from an FCurve.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D15283
Currently Blender generates mipmaps that override the existing ones.
This patch disables generating new mipmaps for compressed textures.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D14459
Not sure why multiple pools were created: the pool should be able to
handle two sets of tasks.
Perhaps non-measurable improvement in terms of performance but this
change simplifies code a bit.
Was accidental regression in rBed9b21098dd27bf9364397357f89b4c2648f40c2
Remove the input slider's PROP_FACTOR subtype in favor of the default to
align with other IOR sliders. This provides much better control when
dragging the value with the mouse.
Differential Revision: https://developer.blender.org/D15477
Drop events ignored the cursor coordinates, under the assumption that
cursor motion events would also be sent to update the cursor location.
This depended on the behavior of the compositor, it failed for Sway
but worked for Gnome-shell & River.
Resolve by making use of the drop events cursor coordinates.
Due to the ordering of the checks, assert and async were not highlighted
in the editor, even though they were in the list of keywords.
Differential Revision: http://developer.blender.org/D15483
Although e.g. in the dopesheet there is no specific concept of
active action, displaying panels requires singling out one action
reference. It is more efficient and clearer to implement this
natively in the context rather than using selected_visible_actions[0].
- In the Action Editor the action is taken from the header.
- In the Dope Sheet the first selected action is chosen, because
there is no concept of an active channel or keyframe.
- In the Graph Editor the action associated with the active curve
is used, which should also be associated with the active vertex.
This case may be different from selected_visible_actions[0].
Differential Revision: https://developer.blender.org/D15412
The real RNA path_resolve method supports indexing lists,
but the python version on the Context object does not. This
patch adds the missing feature for completeness.
Differential Revision: https://developer.blender.org/D15413
* Allows Apple Silicon machines to use 8-wide BVH, which the release notes
mention give an 8% performance boost.
* An update to this version is also required for OpenPGL.
This patch includes contributions from Jason Fielder and Sebastian Herholz.
Ref D15286, T98555
Differential Revision: https://developer.blender.org/D15482
The tooltips from the Add Node menu were extracted, but not translated.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15467
openSubdiv_init() would detect available evaluators before any OpenGL context
exists, causing a crash with libepoxy. This test however is redundant as we
already check the requirements on the Blender side through the GPU API.
To simplify things, completely remove the device detection in the opensubdiv
module and reduce the evaluators to just CPU and GPU. The plan here is to move
to the GPU module abstraction over OpenGL/Metal/Vulkan and so all these
different backends no longer make sense.
This also removes the user preference for OpenSubdiv compute device, which was
not used for the new GPU subdivision implementation.
Ref D15291
Differential Revision: https://developer.blender.org/D15470
The stroke code now supports raycasting the original mesh.
This fixes anchored mode not working for negative brushes,
which might move the mesh out of the initial mouse cursor
position.
The scene spacing code was failing to
check if a raycast failed, which can happen
when sculpting the edges of objects in negative
mode.
Note I removed what I suspect was a hack put
in to fix this, spacing was clamped
to 0.001 scene units.
Scene spacing mode is actually quite broken,
so it will be fixed in a series of phases.
Fix for {T99039}.
The problem was that `AUD_mixdown` and `AUD_mixdown_per_channel` were returning pointers to freed memory.
Two key changes are made:
1. The return value of those functions now simply return a bool as to whether the operation succeeded, instead of an optional error string pointer.
2. The error string buffer is now passed into the function to be filled in case an error occurs. In this way, the onus of memory ownership is unamibiguously on the caller.
Differential Revision: https://developer.blender.org/D15260
Instead of removing the `bgl` module, set all it's functions to stubs
so importing `bgl` or any of it's members doesn't raise an error.
This avoids problems for scripts that import bgl but don't call it's
functions when running in background mode.
Simplify logic for freeing a NULL pointer. While no null-pointer
de-reference was performed, this wasn't as so obvious as the pointer
was passed to MEM_lockfree_allocN_len before checking for NULL.
NOTE: T99744 claimed the a NULL pointer free was a vulnerability,
while I can't see evidence for this - exiting early makes it clearer
the memory isn't accessed.
*Details*
- Add MEMHEAD_LEN macro, avoids redundant NULL check.
- Use "UNLIKELY(..)" hint's for error cases
(freeing NULL pointer and checking if `leak_detector_has_run`).
Backend initialization needs to be delayed until after the OpenGL context
is created. This worked fine in foreground mode because the OpenGL context
already exists for the window at the point GPU_backend_init_once was called,
but not for background mode.
Create the backend just in time in GPU_context_create as before, and
automatically free it when the last context id discarded. But check if any
GPU backend is supported before creating the OpenGL context.
Ref D15463, D15465
For transparency, volume and light intersection rays, adjust these distances
rather than the ray start position. This way we increment the start distance
by the smallest possible float increment to avoid self intersections, and be
sure it works as the distance compared to be will be exactly the same as
before, due to the ray start position and direction remaining the same.
Fix T98764, T96537, hair ray tracing precision issues.
Differential Revision: https://developer.blender.org/D15455
This causes an assert with libepoxy, but was wrong already regardless.
Refactor logic to work as follows:
* GPU_exit() deletes backend resources
* Destroy UI GPU resources with the context active
* Call GPU_backend_exit() after deleting the context
Ref D15291
Differential Revision: https://developer.blender.org/D15465
An increased number of vertices is not a stopper for the surface
deform modifier anymore. It might still be useful to expose the
message in the UI, but printing error message to the console on
every modifier evaluation makes real errors to become almost
invisible.
Differential Revision: https://developer.blender.org/D15468
When rendering with headless builds, show an error instead of crashing.
Previously GPU_backend_init was called indirectly from
DRW_opengl_context_create, a new function is now called from the window
manager (GPU_backend_init_once), so it's possible to check if the GPU
has a back-end.
This also disables the `bgl` Python module when building WITH_HEADLESS.
Reviewed By: fclem
Ref D15463
This includes:
- new modifier names
It mostly uses `N_` because the strings are actually translated elsewhere.
The goal is simply to export them to .po files.
Most of the new translations were reported in T43295#1105335.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15418
The outliner would tagg all existing local IDs (for remap from linked
reference data to newly created overrides) when creating a new override.
This would become critical issue in case there is several existing
copies of the same override hierarchy (leading to several hierarchies
using the same override).
Further more, BKE override creation code would not systematically
properly remapp linked usages to new overrides one whithin the affected
override hierarchy, leading to potential undesired remaining usages of
linked data.
This was added for Metal, but also gives good results with CUDA and OptiX.
Also enable it for future Apple GPUs instead of only M1 and M2, since this has
been shown to help across multiple GPUs so the better bet seems to enable
rather than disable it.
Also moves some of the logic outside of the Metal device code, and always
enables the code in the kernel since other devices don't do dynamic compile.
Time per sample with OptiX + RTX A6000:
new old
barbershop_interior 0.0730s 0.0727s
bmw27 0.0047s 0.0053s
classroom 0.0428s 0.0464s
fishy_cat 0.0102s 0.0108s
junkshop 0.0366s 0.0395s
koro 0.0567s 0.0578s
monster 0.0206s 0.0223s
pabellon 0.0158s 0.0174s
sponza 0.0088s 0.0100s
spring 0.1267s 0.1280s
victor 0.0524s 0.0531s
wdas_cloud 0.0817s 0.0816s
Ref D15331, T87836
The Metal backend now compiles and caches a second set of kernels which are
optimized for scene contents, enabled for Apple Silicon.
The implementation supports doing this both for intersection and shading
kernels. However this is currently only enabled for intersection kernels that
are quick to compile, and already give a good speedup. Enabling this for
shading kernels would be faster still, however this also causes a long wait
times and would need a good user interface to control this.
M1 Max samples per minute (macOS 13.0):
PSO_GENERIC PSO_SPECIALIZED_INTERSECT PSO_SPECIALIZED_SHADE
barbershop_interior 83.4 89.5 93.7
bmw27 1486.1 1671.0 1825.8
classroom 175.2 196.8 206.3
fishy_cat 674.2 704.3 719.3
junkshop 205.4 212.0 257.7
koro 310.1 336.1 342.8
monster 376.7 418.6 424.1
pabellon 273.5 325.4 339.8
sponza 830.6 929.6 1142.4
victor 86.7 96.4 96.3
wdas_cloud 111.8 112.7 183.1
Code contributed by Jason Fielder, Morteza Mostajabodaveh and Michael Jones
Differential Revision: https://developer.blender.org/D14645
This is useful when using an armature as a camera rig, to avoid creating and
targetting an empty object.
Differential Revision: https://developer.blender.org/D7012
* Snap border to pixels just outside the drawn border, to more easily select
specific pixels by drawing a border inside them.
* Support cropped border renders.
Fix unreported: Resize with Constrain To Bounds will now limit one shared scale
value for both U and V instead of calculating separate scale values for each.
To fix T98061, the individual origins (transdata->center) is now used when
that mode is active.
See also: 0e9367fc29
Differential Revision: https://developer.blender.org/D15420
Was a bit oif a struggle since those functions take a first string which
is not our label, but should work fine now.
Reported/detected as part of D15418.
The goal of this change is to fix an increasing bottleneck of the event
queue handling when there is an operator bound to a key press event and
is taking longer to finish than a key-repeat speed on the system.
Practical example of when it happens is the marker tracking operator in
a single-frame track mode. Quite often artists will hold down Alt-arrow
to track a segment of footage which seems trivial to track. The issue
arises when the Alt-arrow is released: prior to this change it is was
possible that more frames will be tracked. It also seems that redraws
are less smooth.
It is a bit hard to make easily shareable computer-independent test
case. Instead, a synthetic case can be reproduced by adding a 50 ms
sleep in the `text_move_exec()`. In such synthetic case open a long
text in the text editor and hold left/right arrow button to navigate
the cursor. The observed behavior is that seemingly redraws happen
less and less often and cursor travels longer and longer distances
between redraws. The cursor will also keep moving after the buttons
has been released.
The proposed solution is to ignore sequential key-press events from
being added to the event queue. This seems to be the least intrusive
and the most safe approach:
- If the operator is fast enough there will be no multiple press events
in the queue in both prior and after of this change.
- If the operator is slow enough, clicking the button multiple times
(i.e. clicking arrow button 3 times in a heavy shot will change the
scene frame by exactly 3 frames because no events are ignored in
this case).
- Only do it for key press events, keeping mouse and tabled behavior
unchanged which is crucial for the paint mode.
Note that this is a bit different from the key repeat tracking and
filtering which is already implemented for keymaps as here we only want
to avoid the event queue build-up and do want to ignore all repeat
events. In other words: we do want to handle as many key presses as the
operator performance allows it without clogging anything.
A possible extension to this change could be a key press counter, so
that instead of ignoring the event we merge it into the last event in
the queue, incrementing some counter. This way if some operator really
needs to know exact number of key repeats it can still access it.
Differential Revision: https://developer.blender.org/D15444
For bit counts that were exact multiple of block size, the macro was
computing one block too much.
Reviewed By: Campbell Barton, Bastien Montagne
Differential Revision: https://developer.blender.org/D15454
In preparation for a larger change (D14162), some BLI_bitmap
functionality that could be submitted separately:
- Ability to declare a fixed size bitmap by-value, without extra
memory allocation: BLI_BITMAP_DECLARE
- Function to find the index of lowest unset bit:
BLI_bitmap_find_first_unset
- Test coverage of the above.
Reviewed By: Campbell Barton, Bastien Montagne
Differential Revision: https://developer.blender.org/D15454
Use const pointers to ImageSaveOptions and ImageFormatData for API
parameters where appropriate.
Differential Revision: https://developer.blender.org/D15400
It was smart enough to check if the buffer had the right
size but neglected to cast to a 64 bit value so it
overflowed.
Differential Revision: https://developer.blender.org/D15457
Reviewed By: brecht
We would first invoke the dragging, and then set the drag data (like the
ID or the dragged modifier), so the `wmDropBox.on_drag_start()` handler
wouldn't be able to access this. This broke dragging some IDs from the
Outliner, noticed in D15333.
It's now possible to first create/request drag data, extend it, and then
invoke the actual dragging. The normal function to start dragging
returns `void` now instead of `wmDrag *`, so the drag data can't easily
be modified after starting anymore.
* Don't nest "Show Recent Locations" and "Show System Locations" under a
"Defaults" heading. They are not just a default setting but completely
hide panels from the UI.
* Use own "Show Locations" heading instead, and remove redundant words
from labels.
* Move the options to the top of the panel, they are more general since
they can't be toggled in a File Browser session, and thus have bigger
impact.
We may want to remove these options in a future major release, I don't
think they are useful.
Agreed on with Pablo Vazquez.
When the solve is successful, the light sample needs to be updated since the
effective shading point is now on the last refractive interface. Spread was
not taken into account, creating false caustics.
Differential Revision: https://developer.blender.org/D15449
With choices Default, Lower Memory and Faster Render. For convenience, and
to help communicate what the various settings do.
Differential Revision: https://developer.blender.org/D15446
This patch partitions the active indices into chunks prior to sorting by material in order to tradeoff some material coherence for better locality. On Apple Silicon GPUs (particularly higher end M1-family GPUs), we observe overall render time speedups of up to 15%. The partitioning is implemented by repeating the range of `shader_sort_key` for each partition, and encoding a "locator" key which distributes the indices into sorted chunks.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D15331
The Difference Matte and RGB To BW nodes have a wrong output type. They
should be floats but are of type color.
This is a regression that was introduced during the migration to the
socket builder API in D13266.
Reviewed By: Blendify, fclem
Differential Revision: https://developer.blender.org/D15232
Quiet warning from [0], no functional change as the this information
was always ignored.
Key release events shouldn't have associated text, this was cleared
for wmEvent's, so there is no reason to pass it from GHOST.
[0]: d6fef73ef1
As part of a larger change (https://developer.blender.org/D14162),
adding more test coverage for existing functionality separately.
New tests:
- ids_sorted_by_default
- ids_sorted_by_default_with_libraries
- name_too_long_handling
- create_equivalent_numeric_suffixes
- zero_suffix_is_never_assigned
- remove_after_dup_get_original_name
- name_number_suffix_assignment
- renames_with_duplicates
- names_are_unique_per_id_type
Using geometry nodes with attributes on a curve object and changing the
output is crashing. This is because the `render_mutex` in the curve
drawing cache is cleared after changes in `curves_batch_cache_init` and
set to null. The cache isn't actually needed currently because all draw
updates are single-threaded, but the new `drw_attributes_merge` function
still tries to access it (this seems to be tolerated on Linux platforms
but crashes on Windows).
Make sure the render_mutex is always initialized after (re-)initializing
the cache.
Many menus get their labels exported to the .po file, but then are not actually translated in the UI.
Before:
{F13283752}
After:
{F13283750}
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15417
Rename and refactor several F-curve key manipulation functions, and move
them from `editors` to `blenkernel`.
The functions formerly known as `delete_fcurve_key`,
`delete_fcurve_keys`, and `clear_fcurve_keys` have been moved from
`ED_keyframes_edit.h` to `BKE_fcurve.h` and have been renamed according
to hierarchical naming rules.
Below is a table of the naming changes.
| From | To |
| -- | -- |
| `delete_fcurve_key(fcu, index, do_recalc)` | `BKE_fcurve_delete_key(fcu, index)` |
| `delete_fcurve_keys(fcu)` | `BKE_fcurve_delete_keys_selected(fcu)` |
| `clear_fcurve_keys(fcu)` | `BKE_fcurve_delete_keys_all(fcu)` |
| `calchandles_fcurve()` | `BKE_fcurve_handles_recalc()` |
| `calchandles_fcurve_ex()`| `BKE_fcurve_handles_recalc_ex()` |
The function formerly known as `delete_fcurve_key` no longer takes a
`do_fast` parameter, which determined whether or not to call
`calchandles_fcurve`. Now, the responsibility is on the caller to run
the new `BKE_fcurve_handles_recalc` function if they have want to
recalculate the handles.
In addition, there is now a new static private function called
`fcurve_bezt_free` which sets the key count to zero and frees the key
array. This function is now used in couple of instances of functionally
equivalent code. Note that `BKE_fcurve_delete_keys_all` is just a
wrapper around `fcurve_bezt_free`.
This change was initially spurred by the fact that `delete_fcurve_keys`
was improperly named; this was a good opportunity to fix the location
and naming of a few of these functions.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D15282
Some operator titles were not translated in the quick favorites menu.
Before:
{F13283724}
After:
{F13283725}
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15416
Fundamental issue is that the attribute api returns none, because
the custom data api returns null for a layer when the size of 0.
This should be improved separately.
3D text included checks for escape codes such as \n\r\b which have not
been included in wmEvent.ascii since [0] (2009).
Remove these and use more straightforward logic for overriding the
events text input.
[0] 66437a62a7
- Remove references to `ISTEXTINPUT` as any keyboard event with it's
utf8_buf set can be handled as text input.
- Update references to the key repeat flag.
The `ascii` member was only kept for historic reason as some platforms
didn't support utf8 when it was first introduced.
Remove the `ascii` struct members since many checks used this as a
fall-back for utf8_buf not being set which isn't needed.
There are a few cases where it's convenient to access the ASCII value
of an event (or nil) so a function has been added to do that.
*Details*
- WM_event_utf8_to_ascii() has been added for the few cases an events
ASCII value needs to be accessed, this just avoids having to do
multi-byte character checks in-line.
- RNA Event.ascii remains, using utf8_buf[0] for single byte characters.
- GHOST_TEventKeyData.ascii has been removed.
- To avoid regressions non-ASCII Latin1 characters from GHOST are
converted into multi-byte UTF8, when building X11 without
XInput & X_HAVE_UTF8_STRING it seems like could still occur.
While GHOST/SDL doesn't support non-ASCII text input,
use the UTF8 buffer to be consistent with all other back-ends.
Move the conversion from SDL_KeyboardEvent to ASCII into a function.
Also only lookup this value on key press (not release).
New remapper code would also fail in some cases when remapping
libraries, similar to the issue yesterday, because ID_LI type had no
mask value.
That would fail to remap `parent` member of a library to NULL when
deleting that parent, leading to a crash e.g. in Outliner tree building
code.
Reported by @JulienKaspar from Blender studio.
This patch updates the documentation for arguments regarding the `Gizmo`
type.
- Corrected `select_id` doc for draw_preset_ functions. `-1` indicates
that no selection ID is to be written, but previous docs incorrectly
specified `0` instead.
- Added missing doc for `target` argument for `target_set_handler`
function.
Reviewed by: Aaron Carlisle (Blendify)
Differential Revision: https://developer.blender.org/D14834
This patch allows new GizmoGroup classes to support tool fallback keymap.
With this patch, when new gizmo groups add `'TOOL_FALLBACK_KEYMAP'` to
its `bl_options`, the fallback tools are added to the group. This
allows a `WorkSpaceTool` (for example) to have selection be a fallback
tool if the user LeftMouse drags away from other gizmos in the group.
Reviewed by: Campbell Barton (campbellbarton)
Differential Revision: https://developer.blender.org/D15154
This commit exposes snap options in transform operators. These options
are needed for Python tools to control snapping without requiring the
tool settings to be adjusted.
The newly exposed options are:
- `snap_elements` for choosing which element(s) of target the source
geometry should snap to (ex: Face Raycast).
- `use_snap_self`, `use_snap_edit`, `use_snap_nonedit`,
`use_snap_selectable_only` for controlling target selection.
- `use_snap_project` for controlling Face Raycast snapping.
- `use_snap_to_same_target` and `snap_face_nearest_steps` for
controlling Face Nearest snapping.
Reviewed by: Campbell Barton (campbellbarton)
Differential Revision: https://developer.blender.org/D15398
The problem was the new generated strokes were copied from original and the location was offset to mirror, but the internal geometry data was not updated and the collision check done by brushes was not working.
Now, the internal geometry data is recalculated when the modifier is applied.
Not clearing runtime remapping data for the new ID as well as the old
one can lead to false stale data there, wichi could e.g. make indirectly
linked data be tagged as directly linked.
This would generate an error report on file write when hapening on
ShapeKey ID, since that type is not allowed to be directly linked.
Measurements shown on average a 1.08x speedup for a 1.04x increase in
memory usage which is an acceptable trade off for a default setting,
although discoverability of such settings influencing memory usage could
be improved.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D15429
The operator bpy.ops.object.modifier_copy_to_selected()
does not work for the new Curves objects.
This is because it isn't added to BKE_object_supports_modifiers.
Differential Revision: https://developer.blender.org/D15439
On some hardware/systems, blender may crash when adding, rendering or displaying Grease Pencil objects.
In `/source/blender/draw/engines/gpencil/shaders/gpencil_vert.glsl`, line 35:
```
gpMaterialFlag gp_flag = floatBitsToInt(gp_mat._flag);
```
`gpMaterialFlag` is of type `uint`. This is a mismatched-type assignment that can cause crashes on some hardware/systems with GLSL that do not support implicit type casting.
So use `floatBitsToUint` for type conversion.
Differential Revision: https://developer.blender.org/D15433
A geometry component may reference read-only geometry.
In this case it has to be copied before making changes to it.
This was caused by rBb876ce2a4a4638142.
The current specific CentOS7 workaround we have for AoT, which is to
disable __FAST_MATH__ by using -fhonor-nans, now also fixes the
compilation issue for JIT as well since at least driver 23570.
rB57097e9a8515 did not properly consider case where you have more than
one override for a same reference linked ID.
Also adds more security checks around shapekeys, since match between
override and its linked reference is never ensured either way (fixes a
crash reported by @Rik from Blender studio).
Probably to prevent the radius of a point from being stuck at zero,
the `Shrink/Fatten` curve operator sets a minimum value of `0.001`
for all points being transformed.
This is an inconvenience as these points may have been purposely set
to zero on the panel.
And it also doesn't follow the convention seen in other operators
(which keep the value zero).
So remove this limitation.
Add a 'Delete Confirmation' operator property to the 'Delete Marker'
operator. This determines whether the user is asked to confirm the
deletion or not.
Defaults so that only {key X} ({key Backspace} for industry compatible
keymap) prompts for deletion, whereas {key Del} does not show the
confirmation popup.
This also makes the default keymap for marker deletion consistent with
the common delete operators (such as objects and keyframes).
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D13818
In UV edge mode, box and lasso selections allow edge selections only
when the entire edge is contained within the selection area. This
doesn't consider any edges that partially overlap with the selection
area.
This is now fixed by adding a second pass, similar to how these
operators work for edit-mesh selections. Now if both operators are
unable to find any edges contained within the selection area, then
they will perform a second pass which checks for edges that partially
intersect with the selection area.
Now edge selection in the UV editor matches edit-mesh edge-selection
when drawing wire-frame.
Resolves T99443.
Ref D15362
A mesh wrapper might be being accessed for read-only from one thread
while another thread converts the wrapper type to something else.
The proposes solution is to defer assignment of the mesh wrapper
type until the wrapper is fully converted. The good thing about this
approach is that it does not introduce extra synchronization (and,
potentially, evaluation pipeline stalls). The downside is that it
might not work with all possible wrapper types in the future. If a
wrapper type which does not clear data separation is ever added in
the future we will re-consider the threading safety then.
Unfortunately, some changes outside of the mesh wrapper file are
to be made to allow "incremental" construction of the mesh prior
changing its wrapper type.
Unfortunately, there is no simplified file which demonstrates the
issue. It was investigated using Heist production file checked at
the revision 1228: `pro/lib/char/einar/einar.shading.blend`. The
repro case is simple: tab into edit mode, possibly few times.
The gist is that there several surface deform and shrinkwrap
modifiers which uses the same target. While one of them is building
BVH tree (which changes wrapper type) the other one accesses it for
read-only via `BKE_mesh_wrapper_vert_coords_copy_with_mat4()`.
Differential Revision: https://developer.blender.org/D15424
Add internal function (only used for testing at the moment)
`_bpy._driver_secure_code_test`.
Add test `script_pyapi_bpy_driver_secure_eval` to serves two purposes:
- Ensure expressions that should be insecure remain so when upgrading
Python or making any changes in this area.
- Ensure new versions of Python don't introduce new byte-codes that
prevent existing expressions from being executed
(happened when upgrading from 3.7, see [0]).
[0]: dfa5201763
The following opcodes have been added, see [0] for details:
- LIST_TO_TUPLE: convert a list to a tuple,
use for constructing lists/tuples in some cases.
- LIST_EXTEND: use for constructing lists with unpacking.
- SET_UPDATE: use for constructing sets with unpacking.
- CONTAINS_OP: check if `a in b` generally useful.
When writing tests these op-codes where needed for basic operations
and can be safely supported.
Add note why dictionary manipulation op-codes have been left out.
Also restrict namsepace access to anything with an underscore prefix
since these may be undocumented.
[0]: https://docs.python.org/3.10/library/dis.html
Some ID types did not have a filter value, even though they would be
used in remapping code, leading to missing remappings. In that specific
case, shape keys would actually never be properly remapped.
Reproducible in r1230 of
`Heist/pro/animation_test/einar/einar_new_expression_shapes2.blend`,
When dealing with 'embedded' IDs (and the like, e.g. shape keys),
liboverride code could fail in case the reference linked data (e.g. a
mesh) would not have a shapekey anymore, while the override mesh would
still have one.
Found while investigating another issue in Heist production file
`Heist/pro/animation_test/einar/einar_new_expression_shapes2.blend`,
r1230.
Adds a better name that describes when it is used.
The GPU_SHADER_BUILDER is a buildtime tool for developers
to pre-validate GLSL (and in the overseen future pre-compile to
SpirV). We don't see that this needs to become a required
step in the future so WITH_GPU_BUILDTIME_SHADER_BUILDER
is more descriptive name.
Linking GPU shader builder requires stubs for many functions of the USD library.
We don't want to rely on other modules to update the stubs for a tool that
is only used by GPU developers.
This patch raises an error when both WITH_GPU_SHADER_BUILDER and WITH_USD are
enabled. This reduces the maintenance of updating the stubs when USD API changes.
Reviewed By: LazyDodo
Differential Revision: https://developer.blender.org/D15422
They are not strictly needed for compilation and disabling them makes
the compiler more portable without any special trickery.
This change aimed to solve problem which currently happens on the API
documentation build which does not have terminfo installed, but needs
to compile Cycles.
Note that the DPC++ is to be re-compiled.
Note there is a bug in BKE_object_is_visible_in_viewport, it
returns false when the object is in local mode.
The transform operator poll should do a similar test. That
would allow us to move the test from sculpt_brush_strok_invoke
to SCULPT_mode_poll (at the moment we cannot do this due to
the brush operator falling through to the translate keymap
item in global view3d keymap).
This patch fixes naming and renaming issue with dot-dash modifier segment list.
Before: when double clicking and exiting it would append
number at the end regardless of name being changed or not.
Now it works like in other areas.
Authored by: Aleš Jelovčan (frogstomp)
Reviewed By: YimingWu (NicksBest)
Differential Revision: https://developer.blender.org/D15359
The face merging code in exact boolean made an assumption that
the tesselated original face was manifold except at the boundaries.
This should be true but sometimes (e.g., if the input faces have
self-intersection, as happens in the example), it is not.
This commit makes face merging tolerant of such a situation.
It might leave some stray edges from triangulation, but it should
only happen if the input is malformed.
Note: the input may be malformed if there were previous booleans
in the stack, since snapping the exact result to float coordinates
is not guaranteed to leave the mesh without defects.
The importer code was written under incorrect assumption that vertex
data (v, vn, vt commands etc.) are grouped by object, i.e. follow the
o command, and that each object has its own vertex data commands. This
is not the case -- all the vertex data in the whole OBJ file is
"global", with no relation to any objects/groups; it's just that the
faces belong to the object, and then they pull in any vertices they
like.
This patch fixes this incorrect assumption in the importer:
- Vertex data is now properly global; no need to track some sort of
"offsets" per object like it was doing before.
- For each object, face definitions track the minimum & maximum vertex
indices referenced by the object, and then all that vertex range is
created in the final Blender object. Note: it might be (unusual, but
possible) that an object does not reference a sequential range of
vertices, e.g. just a single face with vertex indices 1, 10, 100 --
the resulting Blender mesh will have all the 100 vertices (some
"loose" without belonging to a face). It should be possible to track
the used vertices exactly (e.g. with a vector set), but I haven't
done that for performance reasons.
Reviewed By: Howard Trickey
Differential Revision: https://developer.blender.org/D15410
Address the issue by re-working line continuation handling: stop
trying to parse sequences like "backslash, newline" (which is the
bug: it should also handle "backslash, possible whitespace, newline")
during parsing. Instead, fixup line continuations after reading chunks
of input file data - turn backslash and the following newline into
spaces. The rest of parsing code does not have to be aware of them
at all then.
Makes the file attached to T99536 load correctly now. Also will extend
one of the test files in subversion tests repo to contain backslashes
followed by newlines.
Simplify logic for initializing the wl_buffer, ensure the cursors
custom data is never heft in a half initialized state.
Also remove the need for multiple calls to close when handling errors.
Rename the thumbnail size from Regular to Medium since it's the typical
way to refer to sizing in American English
Reviewed By: Campbell Barton
Differential Revision: https://developer.blender.org/D15305
In some cases it is mandatory to be able to hide parts of the mesh
in order to paint certain areas. The Mask modifier doesn't work in
weight paint, and edit mode hiding requires using selection, which
is not always convenient.
This makes the weight and vertex paint modes always respect edit mode
hiding like sculpt mode. The change in behavior affects drawing and
building paint PBVH. Thus it affects brushes, but not menu operators
like Smooth or Normalize.
In addition, this makes the Alt-H shortcut available even without
any selection enabled, and implements Hide for vertex selection.
Differential Revision: https://developer.blender.org/D14163
This was caused by strip content length and start position being
incorrect. Previously this was set from strip boundary by update
function, but it was removed.
Add back code to set effect strip start and length.
Previously content length was always 1 for effects, but now it must
correspond to strip length. Because of this workaround for speed effect
to get this apparent content length was removed.
To avoid Cycles not showing any hair by default, and to avoid very slow render
due to many overlaps with the previous 1 meter default in the node.
Fixes T97584, T99319
Differential Revision: https://developer.blender.org/D15405
Currently, there are two attribute API. The first, defined in `BKE_attribute.h` is
accessible from RNA and C code. The second is implemented with `GeometryComponent`
and is only accessible in C++ code. The second is widely used, but only being
accessible through the `GeometrySet` API makes it awkward to use, and even impossible
for types that don't correspond directly to a geometry component like `CurvesGeometry`.
This patch adds a new attribute API, designed to replace the `GeometryComponent`
attribute API now, and to eventually replace or be the basis of the other one.
The basic idea is that there is an `AttributeAccessor` class that allows code to
interact with a set of attributes owned by some geometry. The accessor itself has
no ownership. `AttributeAccessor` is a simple type that can be passed around by
value. That makes it easy to return it from functions and to store it in containers.
For const-correctness, there is also a `MutableAttributeAccessor` that allows
changing individual and can add or remove attributes.
Currently, `AttributeAccessor` is composed of two pointers. The first is a pointer
to the owner of the attribute data. The second is a pointer to a struct with
function pointers, that is similar to a virtual function table. The functions
know how to access attributes on the owner.
The actual attribute access for geometries is still implemented with the `AttributeProvider`
pattern, which makes it easy to support different sources of attributes on a
geometry and simplifies dealing with built-in attributes.
There are different ways to get an attribute accessor for a geometry:
* `GeometryComponent.attributes()`
* `CurvesGeometry.attributes()`
* `bke::mesh_attributes(const Mesh &)`
* `bke::pointcloud_attributes(const PointCloud &)`
All of these also have a `_for_write` variant that returns a `MutabelAttributeAccessor`.
Differential Revision: https://developer.blender.org/D15280
Allows to put libraries which are always needed by Blender into the
lib/ folder and not worry about OpenGL libraries picked up from there.
Currently no functional changes as we do not yet have dynamic libraries
which we load at startup. It allows to use direct linking of oneAPI
Cycles device (see D15397), also it is something which would need to
happen to support USD/Hydra/TBB compiler as dynamic libraries in the
future.
Differential Revision: https://developer.blender.org/D15403
with a very high min-driver version requirement, placeholder until JIT
CentOS runtime compilation issue gets fixed in a defined version.
min-driver version check can be worked around by setting
CYCLES_ONEAPI_ALL_DEVICES environment variable.
Similar to 1a6d0ec71c which changed the mesh boolean node (and
also caused this bug), this commit changes the material mapping for the
exact mode of the boolean modifier. Now the result should contain any
material on the faces of the input objects (including materials linked
to objects and meshes). The improvement is possible because materials
can be changed during evaluation (as of 1a81d268a1).
Differential Revision: https://developer.blender.org/D15365
Curves that are attached to a surface can now follow the surface when
it is modified using shape keys or modifiers (but not when the original
surface is deformed in edit or sculpt mode).
The surface is allowed to be changed in any way that keeps uv maps
intact. So deformation is allowed, but also some topology changes like
subdivision.
The following features are added:
* A new `Deform Curves on Surface` node, which deforms curves with
attachment information based on the surface object and uv map set
in the properties panel.
* A new `Add Rest Position` checkbox in the shape keys panel. When checked,
a new `rest_position` vector attribute is added to the mesh before shape
keys and modifiers are applied. This is necessary to support proper
deformation of the curves, but can also be used for other purposes.
* The `Add > Curve > Empty Hair` operator now sets up a simple geometry
nodes setup that deforms the hair. It also makes sure that the rest
position attribute is added to the surface.
* A new `Object (Attach Curves to Surface)` operator in the `Set Parent To`
(ctrl+P) menu, which attaches existing curves to the surface and sets the
surface object as parent.
Limitations:
* Sculpting the procedurally deformed curves will be implemented separately.
* The `Deform Curves on Surface` node is not generic and can only be used
for one specific purpose currently. We plan to generalize this more in the
future by adding support by exposing more inputs and/or by turning it into
a node group.
Differential Revision: https://developer.blender.org/D14864
Blender would crash when a file was saved where the tool settings is
set to paint on a single image (3d texture painting).
Reason is that the selected image memory address wasn't updated
when the new address.
This patch adds (selected/active) outline around a curve object in object mode.
{F13270680}
In the past the draw bounds option was enabled for any curve objects. With this
patch it isn't needed and will be disabled.
In the future the curve outline could also be enabled to improve GPU selection.
Reviewed By: dfelinto, HooglyBoogly, fclem
Maniphest Tasks: T95933
Differential Revision: https://developer.blender.org/D15308
Add logging to all Wayland listener callbacks as it can be difficult
to detect the cause of problems.
Using break-points often isn't practical for debugging interactive
windowing / compositor issues
Logging needs to be enabled on the command line, e.g:
blender --log "ghost.wl.*" --log-level 2 --log-show-basename
Add macros from BLI_utildefines, mainly to avoid that avoid repetition
(ELEM, UNPACK*, CLAMP* & ARRAY_SIZE).
Also add macros LIKELY/UNLIKELY as there are quiet a lot of checks
for unlikely situations for GHOST/Wayland (not having a keyboard,
or mouse for e.g.).
It's helpful to make the separation of legacy data formats explicit,
because it declutters actively changed code and makes it clear which
areas do not follow Blender's current design. In this case I separated
the `MFace`/"tessface" conversion code into a separate blenkernel
.cc file and header. This also makes refactoring to remove these
functions simpler because they're easier to find.
In the future, conversions to the `MLoopUV` type and `MVert`
can be implemented here for the same reasons (see T95965).
Differential Revision: https://developer.blender.org/D15396
Add support for Variable/Multiple Master font features. These are fonts
that contain a range of design variations along multiple axes. This
contains no client-facing options.
See D12977 for details and examples
Differential Revision: https://developer.blender.org/D12977
Reviewed by Brecht Van Lommel
Use the image user from the image editor to correctly get the frame in the
operators. Based on patch by Nicolas (john-g-h-doe) with changes by me.
Differential Revision: https://developer.blender.org/D15380
`GSpan` and spans based on virtual arrays were not default constructible
before, which made them hard to use sometimes. It's generally fine for
spans to be empty.
The main thing the keep in mind is that the type pointer in `GSpan` may
be null now. Generally, code receiving spans as input can assume that
the type is not-null, but sometimes that may be valid. The old #type() method
that returned a reference to the type still exists. It asserts when the
type is null.
This is temporary to investigate which behavior should be kept when
creating an override hierarchy if there are no cherry-picked data
defined: make all overrides user-editable, or not.
This removes the 'make override - fully editable' menu entries.
Followup to the previous commit, to display a pin icon in the scene switcher.
This is a good indicator to have and such workspace-wide functionality should
be available in the topbar, close to what it belongs to (scene switching).
Downside is that it makes this already crowded region even more crowded. But
thanks to the use of superimposed icons, it's not too noisy visually.
Differential Revision: https://developer.blender.org/D11890
Reviewed by: Campbell Barton
Adds a "Pin Scene" option to the workspace. When activated, the workspace will
remember the scene that was last activated in it, so that when switching back
to this workspace, the same scene will be reactivated. This is important for a
VSE workflow, so that users can switch between different workspaces displaying
a scene and thus a timeline for a specific task.
The option can be found in the Properties, Workspace tab. D11890 additionally
adds an icon for this to the scene switcher in the topbar.
The workspace data contains a pointer to the scene which is a UI to scene data
relation. When appending a workspace, the pointer is cleared.
Differential Revision: https://developer.blender.org/D9140
Reviewed by: Brecht Van Lommel, Bastien Montagne (no final accept, but was fine
with the general design earlier)
Because children point to, or "use" their parent, the Library Overrides
Hierarchies mode in the Outliner would show parents contained in children, not
children contained in a parent. See D15339 for pictures.
In production files this would make the rig listed under all its children, so
it would appear many times in the tree. Now it appears once and the children
are collected under it.
Refactors the tree building, so instead of using
`BKE_library_foreach_ID_link()`, it now uses the ID relations mapping in
`MainIDRelations`.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15339
Revealed by rB43167a2c251b, but actuall issue is the
`rna_MetaBall_update_data` function expecting a never-NULL `scene`
pointer, which is not guaranteed.
This lead to refactoring the duo
`rna_MetaBall_update_data`/`BKE_mball_properties_copy`, since it was
doing a very sub-optimal O(n^2) process, new code is O(2n) now
(n being the number of Objects).
Not sure why the objects were processed through the existing bases of
the existing scene in the first place, this could miss a lot of affected
objects (e.g. in case said objects are in an excluded collection, etc.).
Also noticed that both old and new implementation can fail to fully propagate
changes to all affected meta-balls in some specific corner cases, added
a comment about it in the code.
Reviewed By: sergey
Maniphest Tasks: T99256
Differential Revision: https://developer.blender.org/D15338
Extends current functionality which was only filling in
the active movie clip. Now we also pre-fill tracking object
name, as well as (plane)track name.
The only real improvement is avoiding some reference counting,
but the main for the change is consistency. Also don't move a
StringRef, since that doesn't own any data anyway.
The spreadsheet ignored the component choice in the data set region
for curves and volume objects, and the original curves data-block wasn't
retrieved from the original object.
Adding Grease Pencil keyframes in the dopesheet (rB92d7f9ac56e0) lead to
crashes from the NLA editor (T99505). This is now resolved, by removing
grease pencil keyframes from NLA editor (as it was in 3.2), and
filtering them out of all NLA-related operations.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D15391
Fix T99453.
Crash due to null pointer access.
So wrap the function call in simple `if` check
Reviewed By: sybren
Maniphest Tasks: T99453
Differential Revision: https://developer.blender.org/D15370
Even if the driver is not dependent on time the modifiers were always
re-evaluated during playback. This is due to the legacy nature of the
check whether modifier depends on time or not: it was simply checking
for sub-string match for modifier in the F-Curve and drivers RNA paths.
Nowadays such dependencies are created by the dependency graph builder,
which allows to have more granular control over what depends on what.
The code is now simplified to only check for "static" dependency of the
modifier form time: for example, Wave modifier which always depends on
time (even without explicit animation involved).
This change also fixes missing relation from the animation component to
the shader_fx modifiers, fixing race condition.
Additional files used to verify relations:
- Geometry: F13257368
- Grease Pencil: F13257369
- Shader FX: F13257370
In these files different types of modifiers have an animated property,
and the purpose of the test is to verify that the modifiers do react
to the animation and that there is a relation between animation and
geometry components of the object. The latter one can only be checked
using the dependency graph relation visualization.
The drivers are not tested by these files. Those are not typically
depend on time, and if there were missing relation from driver to
the modifier we'd receive a bug report already. As well as if there
was a bug in missing time relation to a driver we'd also receive a
report.
Differential Revision: https://developer.blender.org/D15358
This commit adds visualization to the selection in curves sculpt mode.
Previously it was only possible to see the selection when it was
connected to a material.
In order to obstruct the users vision as little as possible, the
selected areas of the curve are left as is, but a dark overlay
is drawn over unselected areas.
To make it work, the overlay requests the selection attribute and then
ensures that the evaluation is complete for curves. Then it retrieves
the evaluated selection GPU texture and passes that to the shader.
This reuses the existing generic attribute extraction system because
there currently wouldn't be any benefits to dealing with selection
separately, and because it avoids duplication of the logic that
extracts attributes from curves and evaluates them if necessary.
Differential Revision: https://developer.blender.org/D15219
This change the 'Purge' button of the Outliner 'Orphaned' view to use
recursive purge, i.e. it wil not only delete immediately unused IDs (as
listed in the view) anymore, but also all their unused dependencies.
Cases were e.g. an object would use a material, and this material would
use this object (e.g. through a driver), even if both those data-blocks
are technically unused, they would remain forever since they were not
detected as such.
Now this is properly detected and purged as part of the 'recursive
purge' operation.
This crashed because in `get_active_fcurve_channel`, the filter did not
filter out channels with no fcurve.
The fix adds the filter `ANIMFILTER_FCURVESONLY`.
See rB92d7f9ac56e0ff1e65c364487542dfb7c32a0a67 for the new filter.
Maniphest Tasks: T99491
Differential Revision: https://developer.blender.org/D15386
Regressed in the following commit due to an inverted conditional:
{rB1159b63a07fd2cbc7fc48e162d57721c9c85b3f6}
Differential Revision: https://developer.blender.org/D15389
Ensure that the Image maintains the proper file path after saving all
the individual tiles.
The image_save_post function is unaware that the filepath it receives
is only for a single tile, not the entire Image, and happily keeps
setting ima->filepath to the concrete filepath for each tile.
There were 2 problems with the code that attempted to correct the
Image filepath back to the UDIM virtual form:
- It would trample the "relative" directory that might have been set
- It would do the wrong thing if no tiles could be saved at all
The design is now as follows: Example of trying to save to a new PathB
| | all tiles ok | any tile not ok|
| -------------------------------- | ---------------- | ---------------|
| ima->filepath is currently empty | set to new PathB | keep empty |
| ima->filepath is currently PathA | set to new PathB | keep PathA |
Differential Revision: https://developer.blender.org/D15384
As pointed out in a comment on T89421, if a MTL file contained
something like: `map_Ka -o 1 2.png` then it was parsed as having
offset `1 2` and the texture filename just a `.png`. Make it so that
mtl option numbers are parsed in a way where the number is only
accepted only if it's followed by whitespace.
Differential Revision: https://developer.blender.org/D15385
Fixes T97743: the import code was setting EEVEE blending mode whenever
a transparency texture was present (map_d), or when the materials
illum was saying "yo, transparency!". But if only the material's d
was below 1.0, it was not setting the blend mode, which is different
to user expectations.
Differential Revision: https://developer.blender.org/D15383
The falloff was applied to scale by error. Now, the falloff is only applied to the rotation.
Differential Revision: https://developer.blender.org/D15364
.
Pass in arguments for internal grab logic instead of accessing
some values from the window and other values as arguments.
While more verbose it's simpler to reason about.
Regression in [0] which didn't account for the bounds of empty objects.
Add support support calculating bounds from empty draw-type to use in
pose-bone culling.
[0]: 3267c91b4d
Showing the expression alone may not be enough to track down an error
evaluating a py-driver. Show information about the target ID & property
in the error message as well.
Error in [0] which assumed the struct member was renamed however
byte-code access from PyCodeObject now requires an API call.
Thanks to @music for pointing this out.
[0]: 780c0ea097
When in Object Mode, any of the active- and edit-related snapping
options (Include Active, Include Edited, Include Non-Edited) should be
ignored when in Object Mode, otherwise snapping could be effectively
disabled.
This commit forces snap code to ignore the active- and edit-related
options when in Object Mode.
Reviewed By: Germano Cavalcante (mano-wii)
Differential Revision: https://developer.blender.org/D15366
The tooltips added for shader nodes in D15309 are very helpful already.
This commit makes a few tweaks to make them more consistent, concise,
and includes some fixes. Note that this might move some descriptions
further away from the wording in the manual.
* Make wording more concise
* Start fewer new sentences
* Use "For Example" slightly less
* Avoid repeating the node's name unnecessarily
* Spelling/grammar fixes
* Don't capitalize some words
* Use consistent verb conjugation
* Use ASCII characters/more common quote symbols
* Corrections to information
* Plural/singular corrections
* "smoke domains" -> "volume grids"
* Fix tooltip for separate and combine color nodes
* Refer to color sockets as colors rather than "images"
* Avoid "advice" in a few places, which should be left for the manual
* Remove information for sockets and could be in their tooltips
* Avoid referring to the locations of a property in the UI
* Avoid manual newlines (mostly reserve for "Note:")
* Leave UI code in control of wrapping, which is more consistent
* Add some information
* That the UV map and color attribute nodes use a default
* That Voronoi is "based on the distance to random points"
* Add "(Deprecated)" to old color combine and separate nodes
Differential Revision: https://developer.blender.org/D15381
Previous code was doing N collection syncs when duplicating N objects.
New code avoids all the intermediate syncs by using
BKE_layer_collection_resync_forbid and
BKE_layer_collection_resync_allow, and then does one
BKE_main_collection_sync + BKE_main_collection_sync_remap for the
whole operation. There is some complexity involved where the Base
things of newly duplicated objects can't be found yet, without the
sync, so some work on them (marking them selected, active, ...) has
to be deferred until after the sync.
Timings: scene with 10k cubes, each with unique mesh (Windows, VS2022
Release build, AMD Ryzen 5950X):
- Shift+D duplicate: 13.6s -> 9.2s
- Alt+D duplicate: 4.76s -> 1.53s
Reviewed By: Bastien Montagne
Differential Revision: https://developer.blender.org/D14150
We used it only to access device id for explicitly allowing Arc GPUs.
It made the backend require ze_loader.dll which could be problematic if
we end up using direct linking.
I've replaced filtering based on PCI device id by using other HW properties
instead (EUs, threads per EU), that are now available through Level-Zero.
The objects making up each icon are placed in a group named after the icon
coordinates in the grid. This change has no impact on the current pipeline used
to include icons in a Blender build, but lays the foundation to explore other
workflows to do that, and tidies up the file.
Differential Revision: https://developer.blender.org/D15251
Initially oneAPI implementation have waited after each memory
operation, even if there was no need for this. Now, the implementation
will wait only if it is really necessary - it have improved
performance noticeble for some scenes and a bit for the rest of them.
Allow for a small epsilon to improve handling of uvs that are on edges.
Generally, when using reverse uv sampling, we expect that the sampling
is supposed to succeed.
Caused by [0] which made accessing the drag-start require a function
instead of being the value written into the event cursor coordinates.
[0]: b8960267dd
Pre-fills movie clip from the scene to the following nodes:
- Keying Screen
- Plane Track Deform
- Track Position
The rest of tracking related nodes were already doing so.
Differential Revision: https://developer.blender.org/D15377
The importer parts that were doing assignment of materials to the
imported objects/meshes were essentially having a quadratic complexity
in terms of scene object count. For each material assigned to each
object, they were scanning the whole scene, checking which other
Objects use the same Mesh data, in order to resize their material
arrays to match the size.
Performance details (Windows, Ryzen 5950X):
- Import OBJ Blender 3.0 splash scene (24k objects): 43.0s -> 32.9s
- Import USD Disney Moana scene (260k objects): saves two hours
(~7400s). Note that later on this crashes when trying to render the
imported result; crashes in the same way/place both in master and
this patch.
Implementation details:
The importers were doing "scan the world" basically twice for each
object, for each material: once when creating a new material slot
(assigns an empty material), and then again when assigning the
material.
However, all these importers (USD, Alembic, OBJ) always create one
Object for one Mesh. So that whole quadratic complexity resulting
from "scan the world for possible other users of this obdata" is
completely not needed; it just never finds anything. So add a new
dedicated function BKE_object_material_assign_single_obdata that skips
the expensive part, but should only be used when the caller knows that
the obdata has exactly one user (the passed object).
Reviewed By: Bastien Montagne, Michael Kowalski
Differential Revision: https://developer.blender.org/D15145
Usual same issue with outliner operations, where you apply it on one
item, and then try to apply it again on same item listed somewhere else
in the tree...
Fixed by using the 'multi-tagged deletion' code we now have for IDs,
that way tree-walking function just tags IDs for deletion, and they all
get deleted at once at the end.
The new OBJ/MTL importer was already handling case T89421
correctly, but there was no test coverage to prove it. Extend
the tests to parse various forms of "-o" and "-s" (one, two, three
numbers).
Add intern/wayland_dynload which is used when WITH_GHOST_WAYLAND_DYNLOAD
is enabled (off by default). When enabled, systems without Wayland
installed will fall back to X11.
This allows Blender to dynamically load:
- libwayland-client
- libwayland-cursor
- libwayland-egl
- libdecor-0 (when WITH_GHOST_WAYLAND_LIBDECOR is enabled).
The offsets were filled with the same value,
but they must be the total accumulated point count.
Differential Revision: https://developer.blender.org/D15374
This commit moves the subdivide curve node implementation to the
geometry module, changes it to work on the new curves data-block,
and adds support for Catmull Rom curves. Internally I also added
support for a curve domain selection. That isn't used, but it's
nice to have the option anyway.
Users should notice better performance as well, since we can avoid
many small allocations, and there is no conversion to and from the
old curve type.
The code uses a similar structure to the resample node (60a6fbf5b5)
and the set type node (9e393fc2f1). The resample curves node can be
restructured to be more similar to this soon though.
Differential Revision: https://developer.blender.org/D15334
This is not strictly speaking a regression, this worked before partial
resync was introduced purely because the whole override hierarchy was
systematically re-built.
But support for material pointers in obdata (meshes etc.) was simply not
implemented.
NOTE: This commit also greatly improves general support of materials in
liboverrides, although there is still more work needed in that area to
consider it properly supported.
We do not (currently) consider other ID types as 'end points' justifying
to create an override hierarchy, however if the 'root' ID (i.e. the ID
the user selected as base to create the override) is not an object or
collection, we still want to check all of its dependencies.
This fixes e.g. if a material depends on another Empty object, and user
tries to hierarchy-override that material, its Empty dependency not
being overridden.
Change the behavior of the "Frame start" and [Frame] "End" fields of an
NLA Strip in the NLA editor.
Frame Start now behaves like translating with {key G} and moving the
mouse. It also updates the Frame End to ensure the strip remains the
same length.
Frame End changes the length of the strip, based on the Repeat property.
If there are no repeats (i.e. number of repeats = 1) the underlying
Action will change length, such that more or less of its keyframes will
be part of the NLA strip. If there are repeats (i.e. number of repeats
smaller or larger than 1), the number of repeats will change. Either
way, the effective end frame off the strip will be the one set in the
Frame End slider.
The old behavior of stretching time has been removed. It is still
possible to stretch time of a strip, but this no longer automatically
happens when manipulating the Frame Start and Frame End sliders.
**Technical details:** new RNA properties `frame_start_ui` and
`frame_end_ui` have been added. Changing those values (for example via
the sliders, but also via Python) trigger the above behavior. The
behavior of the already-existing `frame_start` and `frame_end`
properties has been simplified, such that these can be set from Python
without many side-effects, simplifying import of data into the NLA.
Reviewed By: sybren, RiggingDojo
Differential Revision: https://developer.blender.org/D14658
- Use API calls to access frame-data as PyFrameObject is now opaque.
- Update opcodes allowed for safe driver evaluation.
**Details**
Some opcodes have been added for safe-driver evaluation.
Python 3.11 removes many opcodes - the number of accepted opcodes in
Blender's listing dropped from 65 to 43) however some new opcodes
also needed to be added. As this relates to security details about newly
added opcodes have been noted below (see [0] for full documentation).
Newly added opcodes:
- CACHE:
Used to control caching instructions.
- RESUME:
A no-op. Performs internal checks.
- BINARY_OP:
Implements the binary and in-place operators,
replacing specific binary operations.
- CALL, PRECALL, KW_NAMES:
Used for calling functions, replacing some existing opcodes.
- POP_JUMP_{FORWARD/BACKWARD}_IF_{TRUE/FALSE/NONE/NOT_NONE}.
Manipulate the byte-code counter.
- SWAP, PUSH_NULL.
Stack manipulation.
Resolves T99277.
[0]: https://docs.python.org/3.11/library/dis.html
New opcodes added since 3.7 meant some actions such as `len()`
were disabled in safe py-driver execution.
The following opcodes have been added, see [0] for details:
- ROT_FOUR: similar to existing ROT_* opcodes, added v3.8.
- ROT_N: similar to existing ROT_* opcodes, added v3.10.
- GET_LEN: Push len(TOS) onto the stack, added v3.10.
- IS_OP: for ternary operator, added v3.9.
- BUILD_SLICE: access `slice` built-in, doesn't expose new
functionality beyond existing `__getitem__` access.
[0]: https://docs.python.org/3.10/library/dis.html
Blender wouldn't start with Python 3.11 because of an error in
Py_TPFLAGS_HAVE_GC usage for `bpy.app.handlers.persistent`.
Remove this flag as it's not necessary.
Part of fix for T99277.
This is just a theoretical improvement currently, I won't try to justify
it with some microbenchmark, but it should be better to use the
specialized single and span virtual arrays when slicing a `GVArray`,
since any use of `GVArrayImpl_For_SlicedGVArray` has extra overhead.
Differential Revision: https://developer.blender.org/D15361
By now I'm not aware of any serious regressions or missing functionality
in the C++ based OBJ importer/exporter. They have more features (vertex colors
support), and are way faster than the Python based importer/exporter.
Reviewed By: Thomas Dinges, Howard Trickey
Differential Revision: https://developer.blender.org/D15360
This was reported as part of D15219 but it is a problem in master, not
in the patch.
EEVEE is drawing with a cheap sampling when navigating or painting, but
we need to clear the painting flag when we are done painting.
For a rainy day: DRW_state_is_navigating() should be renamed to indicate
that it also checks for the painting flag.
The problem was the last point had the original point, but the previous one not, so the loop ends before checking last point.
The solution is avoid the loop exist if the function is checking the previous point before last one.
Regression in [0] caused operations such as file-load or file-new
from any window besides the first to write into the freed:
`wmWindow.eventstate`.
Resolve by copying the event instead of restoring the region relative
cursor position after modifying it.
[0]: 789b1617f7
Improves UV Straighten in several ways:
- Operate on entire selection.
- One straighten for each selected island.
- Prefers pins to anchor the endpoints of the resulting line.
Differential Revision: D15121
Resolves: T78553
Renaming is a nice example of a feature that shouldn't need a specific
implementation for a specific view type (e.g. grid or tree view). So it's
something that can be supported in the general view code. Individual views can
use it "for free" then. This ports the view level part of the renaming code,
the view item level part of it can be ported once we have a common base class
for the view items.
No user visible changes expected.
There's plenty of duplicated code in the grid and the tree view, and I expect
this to become more. This starts the process of unifying these parts, which
should also make it easier to add new views. Complexity in the view classes is
reduced, and some type shenanigans for C compatibility and general view
management can be removed, since there is now a common base type.
For the start this ports some of the view reconstruction, where the view and
its items are compared to the version of itself in the previous redraw, so that
state (highlighted, active, renaming, collapsed, ...) can be preserved.
Notifier listening is also ported.
If you remove the default font from the project, the node will not
have the selected font. In this case, there is no check that the font
does not exist. This suggestion adds an error message if the font
is not specified.
Differential Revision: https://developer.blender.org/D15337
This refactor had two main goals:
* Simplify the sampling code by using an algorithm with fewer special cases.
* Generalize the sampling to support non-sorted samples.
The `SampleSegmentHint` optimization was inspired by `ValueAccessor` from
OpenVDB and improves performance 2x in my test cases.
Differential Revision: https://developer.blender.org/D15348
This is the start of a geometry node to do edge, vertex, and face
bevels.
It doesn't yet do anything but analyze the "Vertex cap" around
selected vertices for vertex bevel.
Surfaces from window decorations were passed into GHOST's listeners
since libdecor & GHOST share a connection.
This error introduced by recent changes that assumed surfaces passed to
GHOST's handler functions were owned by GHOST.
Tag GHOST surfaces & outputs to ensure GHOST only attempts to access
data it created.
Two main fixes:
- Split tiles only when we are more sure that it will improve distribution.
- Discard edges and chains that are not gonna be used afterwards before chaining.
This speeds up the whole process and also eliminates unnecessary tile splitting.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D15335
Many existing importers/exporters do log the time it takes to system
console (some others log more information too). In particular, OBJ
(C++ & python), STL (C++ & python), PLY, glTF2 all log the time it
takes. However, neither USD nor Alembic do. And also it's harder to
know the time it takes there from a profiler, since all the work
normally is done on a background job and is split between several
threads (so you can't just find some top-level function and see how
much time it took).
This change:
- Adds import/export time logging to USD & Alembic importer/exporter,
- In the time utility class (also used by OBJ & STL), improve the
output formatting: 1) print only one decimal digit, 2) for long
times, print seconds and also produce a hours:minutes:seconds form.
Reviewed By: Michael Kowalski, Kévin Dietrich
Differential Revision: https://developer.blender.org/D15170
The memory manager includes both a GPUContext-local manager which allocates per-context resources such as Circular Scratch Buffers for temporary data such as uniform updates and resource staging, and a GPUContext-global memory manager which features a pooled memory allocator for efficient re-use of resources, to reduce CPU-overhead of frequent memory allocations.
These Memory Managers act as a simple interface for use by other Metal backend modules and to coordinate the lifetime of buffers, to ensure that GPU-resident resources are correctly tracked and freed when no longer in use.
Note: This also contains dependent DIFF changes from D15027, though these will be removed once D15027 lands.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D15277
* Minimum Distance -> Distance Mix
* Max Count -> Count Max
* Shift + A for selection grow
This follows better the names we have in geometry nodes in the Distribute Points
node when using the Poisson Disk method (Distance Min, Distance Max).
The shortcut for the selection grow is the same we use in mesh sculpt
for the Expand Mask operator (which behaves a bit similar).
There are two operators added, which are available via a special
content menu next to the plane track image selector:
- New Image from Plane Marker
- Update Image from Plane Marker
The former one creates an image from pixels which the active plane
track marker "sees" at the current frame and sets it as the plane
track's image.
The latter one instead of creating the new image data-block updates
the image in-place.
This allows to create unwarped texture from a billboard from footage.
The intent is to allow this image to be touched up and re-projected
back to the footage with an updated content.
Available from a plane track image context menu, as well as from the
Track menu.
{F13243219}
The demo of the feature from Sebastian Koenig: https://www.youtube.com/watch?v=PDphO-w2SsA
Differential Revision: https://developer.blender.org/D15312
From quick look it doesn't seem to be leading to real issues yet as the
image buffers are created with the default roles, but valid color space
is needed to be ensured for an upcoming development.
The image which source is set to file is not expected to have empty
file path. If it happens it becomes very tricky to save the image on
exit using the standard quit dialog.
This change makes it so if the image buffer does not have file path
then the new image is set to the "generated" source and it behaves
as if the image was created like so and was fully painted on.
Additionally, mark image as dirty, so that quitting Blender after
such image was added will warn about possible data loss.
Issue was caused by using function `SEQ_render_give_stripelem` to obtain
first `StripElem`, but this function now takes retiming into account.
Since first element was meant to be obtained, point to it directly by
using `seq->strip->stripdata`.
This is a follow up to [0], where it was assumed flushing the output
would run the appropriate leave handlers & clear the keyboard & pointer
surfaces. While that's mostly true it's not guaranteed.
Resolve this by clearing the pointers when closing windows and add NULL
checks before accessing the windows.
Tested with Gnome, KDE & River compositors.
[0]: 58ccd8338e
The offsets array that encodes the sizes of each curve must be filled
anyway, or the curves will be in an invalid state. Calloc is unnecessary
here. To make that situation clearer, fill the offsets with -1 in debug
builds. Always set the first offset to zero though, since that can save
some boilerplate in other areas.
The number of points in the source curve was needed, but the offset
(just zero) was passed instead. It's unclear how this worked before.
A mistake in the recent commit 9e393fc2f1.
Also use a common utility for retrieving the sizes of curves
in ranges instead of reimplementing it for this file.
The first change is reusing the same vector for all types. While we don't
generally optimize for the multi-type case, it doesn't hurt here. The
second change is avoiding calling the corresponding function if there
are no curves of a certain type. This avoids creating attributes for
types that aren't used, for example.
This is clearer about what is actually happening (VArray is small
enough to be a by-value type and is constructed on demand, while
only the generic virtual array is stored).
The node had incorrect handling of instance attributes. For the instance
component, instead of using the instance domain over the point domain,
it just looked through instances recursively when retrieving attributes.
We never want to do that, since we only work on one geometry at a time.
Instead, just switch out the instance domain for the point domain like
the set position node.
Many thanks to the original Author of this patch: Christian Aguilera
The COLLADA importer was silently ignoring the alpha component in the
vertex data.
The `stride` variable holds the component count (3 for RGB; 4 for RGBA),
and can be used for honouring the alpha channel in the vertex data.
Test plan:
- Open Blender.
- Clear the scene.
- Add a plane.
- Enter **Vertex Paint** mode.
- Switch to the **Erase Alpha** blending mode.
- Select a tone of gray.
- Turn strength down to less than 1
- Paint [some of] the vertices of the plane.
- Export project as a COLLADA file (`.dae`).
- Clear the scene.
- Re-import the COLLADA file again.
- Export the project again (with different name).
**Without** this patch, the second exported project will have lost the
alpha component in their vertex data:
```lang=xml, counterexample
<float_array id="Plane-mesh-colors-Col-array" count="24">1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1</float_array>
```
**With** the patch, the first and the second exported projects retain
the alpha values painted previously:
```lang=xml
<float_array id="Plane-mesh-colors-Col-array" count="24">1 1 1 1 1 1 1 0.5490196 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0.5490196</float_array>
```
Reviewed By: cristian64, SonnyCampbell_Unity
Authored by: Christian Aguilera
Differential Revision: https://developer.blender.org/D14246
This modules handles renderpasses allocation and filling. Also handles
blitting to viewport framebuffer and render result reading.
Changes against the old implementation:
- the filling of the renderpasses happens all at once requiring
only 1 geometry pass.
- The filtering is optimized with weights precomputed on CPU and
reuse of neighboor pixels.
- Only one accumulation buffer for renderpasses (no ping-pong).
- Accumulation happens in one pass for every passes using a single
dispatch or fullscreen triangle pass.
TAA and history reprojection is not yet implemented.
AOVs support is present but with a 16 AOV limit for now.
Cryptomatte is not yet implemented.
Removes the following macros for scene/render frame values:
- `CFRA`
- `SUBFRA`
- `SFRA`
- `EFRA`
These macros don't add much, other than saving a few characters when typing.
It's not immediately clear what they refer to, they just hide what they
actually access. Just be explicit and clear about that.
Plus these macros gave read and write access to the variables, so eyesores like
this would be done (eyesore because it looks like assigning to a constant):
```
CFRA = some_frame_nbr;
```
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D15311
Commit 302b04a5a3 introduced new retiming system, that unified sound
pitch animation with strip speed control. Because sound playback is
handled in different way, this did not work as expected and old files
were broken. In addition animation was not copied to new property.
Revert length position and offset handling for sound strips so their
position does not change and remap fcurves to new `speed_factor`
property.
Previously, it would show "Link inside collection" but move between collections
instead in some cases. Additionally there was no tooltip for the "Link before/
after/between collections" case.
Behavior and tooltip should now be consistent in all cases.
Differential Revision: https://developer.blender.org/D15237
rBb9c37608a9e959a896f5358d4ab3d3d001a70833 moved evaluation of
`versions.cmake` before `options.cmake`, as a result of which
`BLENDER_PLATFORM_ARM` was no longer defined in `versions.cmake`,
causing it to choose the wrong OpenSSL version for aarch64. This
reverts that. Also fixes a compiler crash when building flex with some
glibc versions.
Differential Revision: https://developer.blender.org/D15319
Add more math functions for float4 to make them on par with float3 ones. It
makes it possible to change the types of float3 variables to float4 without
additional work.
Differential Revision: https://developer.blender.org/D15318
It wasn't obvious when direct access or lookups should be used.
Add class methods for direct lookups as well as searching from known
windows when windows are accessed outside Wayland's handlers.
This avoids having to check if the window has been removed in some cases.
Closing a window could leave danging pointers which Wayland
callbacks are responsible for clearing.
However, any calls Blender makes that don't originate from Wayland's
handlers don't have that assurance (key-repeat in this case).
Resolve by using a window lookup on each key-repeat event.
GHOST_GetCursorPosition wasn't working properly under Wayland because
the last focused window didn't necessarily match the window used to call
wm_cursor_position_get(..).
Now the window passed into wm_cursor_position_get is passed to GHOST
so that window is used to access cursor coordinates.
Use client (window) relative coordinates for cursor position access,
this only moves the conversion from window-manager into GHOST,
(no functional changes).
This is needed for fix a bug in GHOST/Wayland which doesn't support
accessing absolute cursor coordinates & the window is needed to properly
access the cursor coordinates.
As it happens every caller to GHOST_GetCursorPosition was already making
the values window-relative, so there is little benefit in attempting to
workaround the problem on the Wayland side.
If needed the screen-space versions of functions can be exposed again.
Each off-screen buffer created a surface and EGL window which was
only freed when Blender exited.
Resolve by freeing the associated data when disposing the off-screen
context.
Grease Pencil animation channels are now also shown in the Dopesheet
mode of the Dopesheet editor and in the Timeline.
Grease pencil related events are now listened not only by container
`SACTCONT_GPENCIL` (Grease Pencil Dopesheet), but also
`SACTCONT_DOPESHEET` (main Dopesheet), and `SACTCONT_TIMELINE`
(timeline).
A new Animation Filter flag was added: `ANIMFILTER_FCURVESONLY`. For now
this only filters out Grease Pencil Layer channels.
**Implemented:**
- Preview range set: now only considers selected Grease Pencil keyframes
when `onlySel` parameter is true. Not only this allows the operator to
work with grease pencil keyframes in main dopesheet, but it also fixes
the operator in the Grease Pencil dopesheet.
- Translation: allocation (and freeing) of specific memory for
translation of Grease Pencil keyframes.
- Copy/Paste: call to both Fcurve and GPencil operators, to allow for
mixed selection. Errors are only reported when both the FCurve and
GPencil functions fail to paste anything.
- Keyframe Type change and Insert Keyframe: removed some code here to
unify Grease Pencil dopesheet and main dopesheet code.
- Jump, Snap, Mirror, Select all/box/lasso/circle, Select left/right,
Clickselect: account for Grease Pencil channels within the channels
loop, no need for `ANIMFILTER_FCURVESONLY` there.
**Not Implemented:**
- Graph-related operators. The filter `ANIMFILTER_FCURVESONLY` is
naively added to all graph-related operators, meaning more-or-less all
operators that used `ANIMFILTER_CURVE_VISIBLE`.
- Select linked: is for F-curves channel only
- Select more/less: not yet implemented for grease pencil layers.
- Clean Keys, Sample, Extrapolation, Interpolation, Easing, and Handle
type change: work on Fcurve-channels only, so the
`ANIMFILTER_FCURVESONLY` filter is activated
Graying out these operators (when no fcurve keyframe is selected) can be
done with custom poll functions BUT may affect performance. This is NOT
done in this patch.
**Dopesheet Summary Selection:**
The main summary of the dopesheet now also takes into account Grease
Pencil keyframes, using some nasty copy/pasting of code, as explained
[on devtalk](https://devtalk.blender.org/t/gpencil-layers-integration-in-main-dopesheet-selection-issue/24527).
It works, but may be improved, providing some deeper changes.
Reviewed By: mendio, pepeland, sybren
Maniphest Tasks: T97477
Differential Revision: https://developer.blender.org/D15003
This commit contains various new features for curves sculpt mode
that have been developed in parallel.
* Selection:
* Operator to select points/curves randomly.
* Operator to select endpoints of curves.
* Operator to grow/shrink an existing selection.
* New Brushes:
* Pinch: Moves points towards the brush center.
* Smooth: Makes individual curves straight without changing the root
or tip position.
* Puff: Makes curves stand up, aligning them with the surface normal.
* Density: Add or remove curves to achieve a certain density defined
by a minimum distance value.
* Slide: Move root points on the surface.
Differential Revision: https://developer.blender.org/D15134
For the Normalize Weights operator, dynamically set the default 'Subset'
parameter so that it is applicable to the current context.
When the user's last use of Normalize Weights was set to "Deform Pose
Bones", and then tries to use the operator on a mesh without armature,
Blender would try to use the previous opertor properties and show an
error message. This is resolved by switching to `WT_VGROUP_ACTIVE` in
such cases.
Reviewed By: zanqdo, sybren
Maniphest Tasks: T95038
Differential Revision: https://developer.blender.org/D14961
Rename and simplify the function for initializing the custom space,
avoiding the need for the calling code to be aware of the internals
of bConstraintOb. This patch should not change any behavior.
This was split off from D9732.
Differential Revision: https://developer.blender.org/D15252
Regression caused by the introduction of partial resync in February 2022
(rB1695d38989fd482d3c). Code was missing adding some existing overrides
to the mapping in some specific cases, causing resync to create 'new'
ones instead of re-using existing ones.
This commit also adds a basic resync testcase that illustrates this
issue.
This reverts commit rB31d80ddeaad, and fixes issue introduced in rBf0b4aa5d59e3
by not doing the 'reversed dependency check' in resync case.
Rational here are:
* Supporting reversed dependency in a reliable, coinsistent way in
resync is likely to be a nightmare, if even possible at all.
* Needs for such reversed dependency in resync should be close to 0% of
cases, as long as users remain reasonable with their organization of
their assets (it could only become a problem in extreme bad practice
and corner cases, like a geometry object being added as a child of a
rig in a completely new, otherwise un-overridden collection, in
partial override context).
This decision may need to be re-evaluated later in case we go more
towards a very highly partial-override workflow, but even then I would
expect current solution to work fine in all reasonable use cases.
Fix unused function result warnings for usages of `fread` in the C++
.stl importer, by actually using the returned error code.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D15189
Specifically BKE_texpaint_slots_refresh_object was being called, which
causes cycles to reset at strange times (like moving the mouse cursor
in pose, boundary and various other tools).
This (along with some code that checks if the pbvh pixels need
to be rebuilt) is only run if is_paint_mode (which used to be
needs_colors) is true.
* Color attributes are no longer auto-created when painting an image.
* Workbench shading type is no longer automatically changed to
Attribute for image paint.
This commit adds a new face nearest snapping mode, adds new snapping
options, and (lightly) refactors code around snapping.
The new face nearest snapping mode will snap transformed geometry to the
nearest surface in world space. In contrast, the original face snapping
mode uses projection (raycasting) to snap source to target geometry.
Face snapping therefore only works with what is visible, while nearest
face snapping can snap geometry to occluded parts of the scene. This new
mode is critical for retopology work, where some of the target mesh
might be occluded (ex: sliding an edge loop that wraps around the
backside of target mesh).
The nearest face snapping mode has two options: "Snap to Same Target"
and "Face Nearest Steps". When the Snap to Same Object option is
enabled, the selected source geometry will stay near the target that it
is nearest before editing started, which prevents the source geometry
from snapping to other targets. The Face Nearest Steps divides the
overall transformation for each vertex into n smaller transformations,
then applies those n transformations with surface snapping interlacing
each step. This steps option handles transformations that cross U-shaped
targets better.
The new snapping options allow the artist to better control which target
objects (objects to which the edited geometry is snapped) are considered
when snapping. In particular, the only option for filtering target
objects was a "Project onto Self", which allowed the currently edited
mesh to be considered as a target. Now, the artist can choose any
combination of the following to be considered as a target: the active
object, any edited object that isn't active (see note below), any non-
edited object. Additionally, the artist has another snapping option to
exclude objects that are not selectable as potential targets.
The Snapping Options dropdown has been lightly reorganized to allow for
the additional options.
Included in this patch:
- Snap target selection is more controllable for artist with additional
snapping options.
- Renamed a few of the snap-related functions to better reflect what
they actually do now. For example, `applySnapping` implies that this
handles the snapping, while `applyProject` implies something entirely
different is done there. However, better names would be
`applySnappingAsGroup` and `applySnappingIndividual`, respectively,
where `applySnappingIndividual` previously only does Face snapping.
- Added an initial coordinate parameter to snapping functions so that
the nearest target before transforming can be determined(for "Snap to
Same Object"), and so the transformation can be broken into smaller
steps (for "Face Nearest Steps").
- Separated the BVH Tree getter code from mesh/edit mesh to its own
function to reduce code duplication.
- Added icon for nearest face snapping.
- The original "Project onto Self" was actually not correct! This option
should be called "Project onto Active" instead, but that only matters
when editing multiple meshes at the same time. This patch makes this
change in the UI.
Reviewed By: Campbell Barton, Germano Cavalcante
Differential Revision: https://developer.blender.org/D14591
In "size" voxel resolution mode, calculating the bounds of the mesh to
volume node's input mesh isn't necessary. For high poly this can take
a few milliseconds, so this commit skips the calculation unless we need
it for the "Amount" mode.
Differential Revision: https://developer.blender.org/D15324
This commit adds new Unwrap and Pack Islands nodes, with equivalent
functionality to the existing Unwrap and Pack Islands operators. The
Unwrap node uses generic boolean attributes to determine seams instead
of looking at the seam flags in the mesh geometry.
Unlike the Unwrap operator, the Unwrap node doesn't perform aspect
ratio correction, because this is trivial for the user to implement
with a Vector Math node if it is desired.
The Unwrap node implicitly performs a Pack Islands operation upon
completion, because the results may not be generally useful otherwise.
This matches the behaviour of the Unwrap operator.
The nodes use the existing Vector socket type, and do not introduce a
new 2D Vector type (see T92765).
Differential Revision: https://developer.blender.org/D14389
The RNA API in rna_mesh.c has a function to rename generic customdata
layers. However for customdata layers which are attributes (i.e. not
specialized types) the attribute renaming function needs to be used,
as that can ensure unique names across domains.
Differential Revision: https://developer.blender.org/D15310
This adds a Mesh To Volume Node T86838 based on the existing modifier.
The mesh to volume conversion is implemented in the geometry module,
and shared between the node and the modifier.
Currently the node outputs a grid with the name "density". This may
change in the future depending on the decisions made in T91668.
The original patch was by Kris (@Metricity), further implementation
by Geramy Loveless (@GeramyLoveless), then finished by Erik Abrahamsson
(@erik85).
Differential Revision: https://developer.blender.org/D10895
The compression as sRGB is mostly an implementation detail and showing the
integers does not make it clear what the actual values are that will be used
for computations in geometry nodes. This follows the general convention that
colors in Blender are displayed and edited in scene linear floats.
The raw sRGB bytes can still be viewed as a tooltip.
Ref T99205
Differential Revision: https://developer.blender.org/D15322
This patch includes the full shadow functionality for LineArt:
- Light contour and cast shadow lines.
- Lit/shaded region selection.
- Enclosed light/shadow shape calculation.
- Silhouette/anti-silhouette selection.
- Intersection priority based on shadow edge identifier.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D15109
There were two problems:
1) The checking of the collision was not working with one point only.
2) For one point, the masking was checked always and if the masking was not activated, the stroke was skipped.
The resource binding were missing from the shading group
(`shgroup->uniform_attrs`), leading to no custom property UBO creation
(`drw_uniform_attrs_pool_update`) when issuing the drawcall,
resulting in a missing UBO bind.
The fix make sure to no duplicate the bindings by creating a simple
shader bind instead of a `GPUMaterial` bind.
Candidate for 3.2.1 corrective release.
This happened because of the false assumption that `std::array<char, 32>`
would be treated as a container and not relocate their content if the
`Vector` would grow. Replacing with actual object allocation fixes the
issue.
Candidate for 3.2.1 corrective release.
Using Light output is supported in Cycles. This patch adds support for it
and remove the crash in `ntree_shader_weight_tree_invert()` by treating
it as any other outputs.
Candidate for 3.2.1 corrective release.
This patch adds a new Cycles device with similar functionality to the
existing GPU devices. Kernel compilation and runtime interaction happen
via oneAPI DPC++ compiler and SYCL API.
This implementation is primarly focusing on Intel® Arc™ GPUs and other
future Intel GPUs. The first supported drivers are 101.1660 on Windows
and 22.10.22597 on Linux.
The necessary tools for compilation are:
- A SYCL compiler such as oneAPI DPC++ compiler or
https://github.com/intel/llvm
- Intel® oneAPI Level Zero which is used for low level device queries:
https://github.com/oneapi-src/level-zero
- To optionally generate prebuilt graphics binaries: Intel® Graphics
Compiler All are included in Linux precompiled libraries on svn:
https://svn.blender.org/svnroot/bf-blender/trunk/lib The same goes for
Windows precompiled binaries but for the graphics compiler, available
as "Intel® Graphics Offline Compiler for OpenCL™ Code" from
https://www.intel.com/content/www/us/en/developer/articles/tool/oneapi-standalone-components.html,
for which path can be set as OCLOC_INSTALL_DIR.
Being based on the open SYCL standard, this implementation could also be
extended to run on other compatible non-Intel hardware in the future.
Reviewed By: sergey, brecht
Differential Revision: https://developer.blender.org/D15254
Co-authored-by: Nikita Sirgienko <nikita.sirgienko@intel.com>
Co-authored-by: Stefan Werner <stefan.werner@intel.com>
Patch implements better way to control playback speed than it is
possible to do with speed effect. Speed factor property can be set in
Time panel.
There are 2 layers of control:
Option to retime movie to match scene FPS rate.
Custom speed factor to control playback rate.
Since playback rate is strip property, it is now possible to manipulate
strip as normal one even if it is retimed.
To facilitate manipulation, some functions need to consider speed factor
and apply necessary corrections to strip offset or strip start. These
corrections may need to be float numbers, so start and offsets must be
float as well.
Sound strips now use speed factor instead of pitch. This means, that
strips will change length to match usable length. In addition, it is
possible to group movie and sound strip and change speed of meta strip.
This commit adds the ability to test Eevee viewport playback performance tests.
Tests should be placed in `lib/benchmarks/eevee/*/*.blend`. {rBL62962} added
initial test files. See https://wiki.blender.org/wiki/Tools/Tests/Performance how
to set it up.
To record the playback performance the test start the viewport playback, and adds
a post frame change handler.
This handler will go over the next steps:
* Ensures the viewport is set to rendered mode.
* Wait for shaders to be compiled. Utilizes `bpy.app.is_job_running` function when
available (v3.3) to wait for shader compilation to finish. When not available will wait
for one minute.
* Draw several warmup frames
* Record for 10 seconds tracking the number of frames drawn and performance counters.
* When ready print the result to the console. The results will be extracted when the
benchmark has run.
## Example report
```
master v3.0 v3.1 v3.2
T88219 0.0860s 0.0744s 0.0744s 0.0851s
blender290-fox 1.3056s 0.8744s 0.7994s 1.2809s
```
{F13232387}
Reviewed By: brecht, fclem
Maniphest Tasks: T99136
Differential Revision: https://developer.blender.org/D15302
terminateMantaflow was never called, this leak is more of a technicality
since it's only called on exit.
Also make Py_Initialize/Py_Finalize optional in Pd:setup/finalize
as it caused Blender to crash, finalizing Python twice.
Add a patch to extern/mantaflow to keep track of changes in Blender
from up-stream.
Tagging the object for copy on write in order to change the mode on the
evaluated object was already done when entering sculpt mode, it should
happen when exiting sculpt mode as well.
Also use the message system to tag updates of the mode property.
This is commonly done for other "mode switch" operators. It's
best to be consistent here, though I don't know that lacking that
caused any issues.
Oversight in rB7724251af81f. Skip saving selection properties
for UV edge ring operator as it allows the operator to re-use
the value that was previously set using the key-map.
Reviewed By: campbellbarton
Maniphest Tasks: T98924
Differential Revision: https://developer.blender.org/D15214
This could result in wrong skipping of SVM nodes in the graph. Now make the
logic consistent with the clamping in the OSL implementation and constant
folding.
Thanks to Christophe Hery for finding the problem and providing the fix.
This was preventing correct attribute rendering with multiple attributes.
Since the `CurveInfos` struct is used for data sharing between C++ and
GLSL and inside a UBO it needs to obey the `std140` alignment rules which
states that arrays of scalars are padded to the size of `vec4` for each
array entry.
Enables Vega and Vega II GPUs as well as Vega APU, using changes in HIP code
to support 64-bit waves and a new HIP SDK version.
Tested with Radeon WX9100, Radeon VII GPUs and Ryzen 7 PRO 5850U with Radeon
Graphics APU.
Ref T96740, T91571
Differential Revision: https://developer.blender.org/D15242
GLEW does not support GLX and EGL at the same time, and the distribution version
is likely to have GLX.
This also refactors the code so all OpenGL related CMake options are together.
Differential Revision: https://developer.blender.org/D12034
Optionally use `sphinx_changelog_gen.py` to dump current version of the
API in a JSON file, and use closest previous one listed in given index
file to create a changelog RST page for Sphinx.
Part of {T97663}.
Main change is to make it use JSON format for its dump files, instead of
some Python code.
It also introduces an index for those API dump files, mapping a blender
version to the relevant file path.
This is then used to automatically the most recent (version-number wise)
previous API dump to compare against current one, when generating the
change log RST file.
Part of {T97663}.
This was a mistake in 17a773cdce - I did not notice existing set
function and assumed, that property set DNA directly.
Both get and set functions are now available and readonly flag is
removed.
Latest OpenSubdiv builds without GLEW by default, which is also what we do
for precompiled libraries. So there is no need for compatibility checking
with system GLEW.
Additionally WITH_SYSTEM_GLEW is turned off by default for Blender, and this
logic was presumably added when it was still on by default a few years ago.
Also remove outdated mention of glew-mx, we use intern/glew-mx and no
external library for this.
Differential Revision: https://developer.blender.org/D15281
* TBB MEX version is now 2021, since this versin introduces 'oneTBB'
which brings a lot of incompatibilities with previous versions.
* Fix several typos and mistakes in OSD, Embree and OIDN build code that
prevented proper usage of a local TBB build.
The mask is expected to be always be displayed smooth, and the
option mainly existed for some legacy drivers. IF smooth drawing
causes issues it should be fixed in the drawing code, not as an
option in the interface.
Differential Revision: https://developer.blender.org/D15266
The camera frame (used for selection) was drawn outside the near
clipping plane in those cases.
This has been an issue before as seen in the following commits:
- rB6e7e6832e87
- rB33d322873e6
- rB4f9451c0442
Remaining issue was that the code which ensure the frame isn't behind
the near clipping plane was not taking into account the camera could be
scaled (in Z).
A caller of `BKE_camera_view_frame_ex` (namely
`OVERLAY_camera_cache_populate`) applies scale (also on the depth) which
does not play well with the way `BKE_camera_view_frame_ex` did it.
Now take Z scale into account.
Ref D15178
Selection of Python Console renders in front of the text.
Since the default theme uses a low opacity selection color,
it isn't obvious, but increasing alpha to 100% shows it clearly.
Ref D13111
Instead, create keyboard two states when the keyboard layout is set
(one with & one without num-lock pressed).
This avoids key-press lookups having to check if num-lock exists and
setting the keyboard state for key press & release events.
No functional changes.
Accessing the symbols for keys with no modifiers & num-lock enabled
has unintended consequences for some keyboard layouts that use this
to switch layers.
Resolve by restricting num-locked lookups to keys typically toggled
with num-lock (key-pad home, page up/down ... etc).
Implement scan-code fallback when the scan-code used for AccentGrave
on US keyboards doesn't map to a key known to GHOST.
Without this, shortcuts that use AccentGrave are inaccessible and the
key does nothing.
This matches functionality from X11, see [0].
[0]: f3427cbc98
Show a custom properties panel in the collections tab,
matching other data-blocks which already support this.
Reviewed by: HooglyBoogly, campbellbarton
Ref D12598
In perspective mode the snap point direction needs to be taken into
account to define which side of the face is being looked at.
If there is no face under the mouse cursor, there is no direction
adjustment and the element normal will be used.
Since 7afcfe111a `startdisp` and `enddisp` fields are used as runtime
position storage for effect strips exclusively.
Use getter functon to return handle position and make properties read
only.
The `DEG_OB_COMP_TRANSFORM` and `DEG_OB_COMP_GEOMETRY` relations between
the **Domain** object and the **Flow**, **Effector** and **Force Field** objects
are added in the `updateDepsgraph` callback of the Fluid modifier, more
specifically in `DEG_add_collision_relations`.
The node linked to these components is the `POINT_CACHE` whose assigned
function is `BKE_ptcache_object_reset`.
So include the `eModifierType_Fluid` modifier in outdated cache checks.
Reviewed By: sergey, zeddb
Maniphest Tasks: T84369
Differential Revision: https://developer.blender.org/D15210
Use function `sequence_editor.display_stack(meta_strip)` to set
displayed timeline content.
To view top-level timeline, that does not belong to any meta strip, pass
`None` as argument.
Differential Revision: https://developer.blender.org/D12048
Variable frame rate (VFR) files have been difficult to work with.
This is because during sequential decoding, spacing between frames is
not always equal, but it was assumed to be equal. This can result in
movie getting out of sync with sound and difference between preview and
rendered image. A way to resolve these issues was to build and use
timecodes which is quite lengthy and resource intensive process. Such
issues are also difficult to communicate through UI because it is not
possible to predict if timecode usage would be needed.
With this patch, double buffer is used to keep previously decoded frame.
If current frame has PTS greater than what we are looking for, it is not
time to display it yet, and previous frame is displayed instead.
Each `AVFrame` has information about it's duration, so in theory double
buffering would not be needed, but in practice this information is
unreliable.
To ensure double buffer is always used, function
`ffmpeg_decode_video_frame_scan` is used for sequential decoding, even
if no scanning is expected.
This approach is similar to D6392, but this implementation does not
require seeking so it is much faster. Currently `AVFrame` is only
referenced, so no data is copied and therefore no overhead is added.
Note: There is one known issue where seeking fails even with double
buffering: Some files may seek too far in stream and miss requested
PTS. These require preseeking or greater negative subframe offset
Fixes: T86361, T72347
Reviewed By: zeddb, sergey
Differential Revision: https://developer.blender.org/D13583
It didn't make much sense to use the "Widget Label" font style here,
since this is just regular text, not labels for widgets. Checked with
@pablovazquez and we agreed on using the "Widget" font style instead.
Also fixes a mismatch where we used the "Widget Label" font style for
drawing, but the "Widget" font style for string width calculations.
Fixes T99207.
The fix is to ensure the filter for id type is run when displaying
assets from an Asset Library.
In the current implementation the id_type filter does not run if a blend
file is opened that also happens to be in an Asset Library directory. If
we have opened a blend file that is in an Asset Library directory, we
now use the same filtering check as for the "Current File" asset
library.
Differential Revision: https://developer.blender.org/D15284
Reviewed by: Julian Eisel
Changes to scrollbars so that they are always visible, but thin and
dim, and widen and become more visible as your mouse approaches.
See D6505 for details and examples.
Differential Revision: https://developer.blender.org/D6505
Reviewed by Campbell Barton
Clear delta transform value after applying transform.
Include delta location while applying transform.
Use `copy_v3_fl` for resetting object scale
Reviewed By: mano-wii
Maniphest Tasks: T99070
Differential Revision: https://developer.blender.org/D15270
Issue was that the Industry Compatible keymap wouldn't select files on a
mouse press, and since the dragged items are determined by the
selection, nothing would be considered as dragged.
Selecting items on mouse press happens since c606044157. I haven't
heard of that issue happening in the Industry Compatible keymap. But if
it did happen, it should be fixed too now.
Add support for Variable/Multiple Master font features. These are fonts
that contain a range of design variations along multiple axes. This
contains no client-facing options.
See D12977 for details and examples
Differential Revision: https://developer.blender.org/D12977
Reviewed by Brecht Van Lommel
MTLFrameBuffer has been implemented to support creation of RenderCommandEncoders, along with supporting functionality in the Metal Context.
Optimisation stubs for GPU_framebuffer_bind_ext has been added, which enables specific assignment of attachment load-store ops at the bind level, rather than on a framebuffer object as a whole.
Begin and end frame markers are used to encapsulate frame boundaries for explicit workload submission. This is required for explicit APIs where implicit flushing of work does not occur.
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D15027
Add WITH_GHOST_WAYLAND_DBUS option, so Blender can be built without
DBUS support. Currently it's only used to access the cursor theme.
Without this the "default" cursors are used instead.
Disabling this since it adds an additional dependency for a minor gain
in functionality, with the benefit of removing a library requirement.
There is also a problem where Blender hangs on startup for ~5 seconds
when DBUS isn't running. Eventually it would be good to be able to avoid
this problem without a build option.
For Wayland the mouse & tablet are separate devices with their
own location, button-pressed state and focused window.
Split internal state storage so they're separate.
Also track mouse button press/release state without needing focused
windows.
This potentially overallocates buffers so that they are usable
for more data types, which allows buffers to be reused more
easily. That leads to fewer separate allocations and improved
cache usage (in one of my test files the number of separate
allocations went down from 1826 to 1555).
This commits reduces the number of function calls through function
pointers in `blender::Any` when the stored type is trivial.
Furthermore, this implements marks some classes as trivial, which
we know are trivial but the compiler does not (the standard currently
says that any class with a virtual destructor is non-trivial). Under some
circumstances we know that final child classes are trivial though.
This allows for some optimizations.
Also see https://www.open-std.org/jtc1/sc22/wg21/docs/papers/2018/p1077r0.html.
The issue was that the "radius" lookup below fails, because there is no
curve data. Arguably, it should be possible to add attributes even when
there is no data. However, the rules for that are a bit loose currently.
A simple fix is to just not run the conversion code when there is nothing
to convert.
As described in T98943, this commit adds a node that can
evaluate a field on a separate domain in a larger field context.
This is potentially useful in many cases, to avoid relying on
a separate capture attribute node, which can make it easier
to build reusable fields that don't need geometry inputs.
Internally, the node just evaluates the input field in the larger
field context and then uses the generic domain interpolation,
so the code is simple. One future optimization might be using
the input selection to only evaluate part of the input field, but
then the selection has to be interpolated as well, and that might
not always be worth it.
Differential Revision: https://developer.blender.org/D15289
Currently when converting from the legacy curve type to the new type,
which happens during evaluation of every legacy curve object, the
`CurveEval` type is used as an intermediate step. This involves
copying all data twice, and allocating a bunch of temporary arrays.
It's also another use of `CurveEval` that has to be removed before
we remove the type.
The main user difference besides the subtlety described below
will be improved performance.
**Invalid Handles and Types**
One important note is that there are two cases (that I know of)
where handles and handle types can be invalid in the old curve
type. The first is animation, where animated handle positions don't
necessary respect the types. The second is control points with a
single aligned handle that didn't necessarily align with the other.
In master (partially on purpose) the code corrects the first situation
(which caused T98965). But it doesn't correct the second situation.
It's trivial to correct for the second case with this patch (because of the
eager calculation decided on in D14464), but this patch makes the choice
not to correct for //either//.
Though not correcting the handle types puts curves in an invalid state,
it also adds flexibility by allowing that option. Users must understand
that any deformation may correct invalid handles.
Fixes T98965
Differential Revision: https://developer.blender.org/D15290
This reduces the amount of code, and improves performance a bit by
doing more with less virtual method calls.
Differential Revision: https://developer.blender.org/D15293
This node takes a point count,a vector field, and float field and creates
a pointcloud with n points at the positions indicated in the vector
field with the radii specified in the float field.The node is placed in
the "Point" menu.
Differential Revision: https://developer.blender.org/D13920
Maniphest Task: https://developer.blender.org/T93044
It was looking up the last modifier in the stack, ignoring visibility, instead
of mesh->runtime.subsurf_runtime_data set by the modifier evaluation and used by
the drawing code.
If there is an error we should stop rendering, instead of finishing with a
wrong render result or reporting a wrong benchmark time.
Ref T96519
Differential Revision: https://developer.blender.org/D15287
This implements client-side window decorations for moving and resizing
windows and HiDPI support.
This functionality depends on the external project 'libdecor' that is
currently a build option: WITH_GHOST_WAYLAND_LIBDECOR.
Reviewed by: brecht, campbellbarton
Ref D7989
In the cases where length is zero, we simply equally distribute the
value based on the control point/curve index.
Differential Revision: https://developer.blender.org/D15285
Manta flow used the `__main__` namespace which it was executed in,
this caused a bug when calculating fluid from Python, which clears
it's `__main__` name-space after execution.
This caused Manta-flows name space to be cleared too.
Resolve this by creating a separate name-space for manta-flow.
Reviewed by: SonnyCampbell_Unity
Ref D15269
Before [0] mouse-motion events left the 'event.value' un-changed,
so a mouse-move would be set to PRESS/RELEASE based on previous events.
Support accessing the previous event value directly
to address feedback from T99102.
Note that the previous cursor location is already exposed.
[0]: 52af3b20d4
This reverts commit c503c5f756,
alternate fix for T82244.
Scripts that run in background mode expected rotation to be usable,
defaulting to the 3D viewport when there is no active windowing data.
Also resolves T88610.
When running the render test cases on MacOS/Intel the hair render
test fail. Most likely due to the dense geometry and the low
resolution of the test image.
This patch increases the fail threshold so these tests will pass.
Note that I haven't been able to test whether this is also the case
for Linux/Windows. If that is the case we should remove the platform
specific test.
Makes the current test cases pass on NVIDIA 1080Ti/515.
The tests still fail on other platforms (AMD, Intel). Some are actual failures.
Other require platform specific reference images.
Original patch provided by Brecht van Lommel.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D15264
When using the old particle hair with the hair info length it wasn't
working with AMD GPUs. The reason was that the drw_curves uniform buffer
wasn't initialized what made the shader select the incorrect length.
Commit 277fa2f441 added channels region to unintended editors if sequencer was
used in area. This caused issues with some editors having 2 tool regions and
non functioning side panel.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D15253
As grab already uses it's own virtual coordinates, cursor warping can
be used when grab is enabled.
Currently nothing depends on this however it could be useful in future.
Walk mode implemented it's own grab which relied on WM_cursor_warp
to work (which isn't implemented for wayland).
Resolve this by using WM_cursor_grab_{enable/disable}.
Besides fixing Wayland this removes the need for workarounds:
- Ensure the event received were after the event generated from warping.
- Alternate logic that reset the "center" when using tablets.
- Checking the cursor location was scaled by native-pixels on macOS.
There is a minor change in behavior: on completion the cursor is left
at the location walk-mode began instead of the center of the region.
This applies the same optimization as b8bd304bd4 to the separate
color node. I observed about a 50% improvement with 10 million values
when only extracting one channel-- from about 17ms to 11ms.
A small regression as a result of adding a custom outline to the empty
virtual socket, which ended up overriding the colors when selected with
Shift+LMB.
Differential Revision: https://developer.blender.org/D15103
the mesh ID for a full update. The conditions it uses are troublesome:
1. There must be an evaluated mesh
2. The evaluated mesh's active byte color layer must equal the original's
This logic doesn't make sense for a few reasons. First of all, the
`mloopcol` pointer doesn't make sense in the context of color
attributes (rather than the old vertex colors), since it only points
to byte color attribute on face corners. Second, just because the
layer pointers are equal doesn't mean something doesn't depend
on the attribute's values.
I think the best solution currently is to remove this "fast update"
case and instead work on optimizing the general case.
Also, T95842 suggests removing these pointers, and this is one
of the last remaining uses of `Mesh.mloopcol`.
Differential Revision: https://developer.blender.org/D15275
We store various lazily calculated caches on meshes, some of which
depend on the vertex positions staying the same. The current API to
invalidate these caches is a bit confusing. With an explicit set of
functions modeled after the functions in `BKE_node_tree_update.h`,
it becomes clear which function to call. This may become more
important if more lazy caches are added in the future.
Differential Revision: https://developer.blender.org/D14760
This makes calculation of selected indices slightly faster when the
input is a virtual array (the direct output of various nodes like
Face Area, etc). The utility can be helpful for other areas that
need to find selected indices besides field evaluation.
With the face area node used as a selection with 4 million faces,
the speedup is 3.51 ms to 3.39 ms, just a slight speedup.
Differential Revision: https://developer.blender.org/D15127
This change helps decrease Intel GPU binaries compile time by 5-10
minutes without impacting other backends.
Reviewed By: sergey, brecht
Differential Revision: http://developer.blender.org/D15273
All of the operators in vertex paint mode didn't work properly with
the new color attribute system. They only worked on byte color type
attributes on the face corner domain.
Since there are four possible combinations of domains and types now,
it mostly ended up being simpler to convert the code to C++ and use
the geometry component API for retrieving attributes, interpolating
between domains, etc. The code changes ended up being fairly large,
but the result should be simpler now.
Differential Revision: https://developer.blender.org/D15261
When input file is changed, `orig_height` and `orig_width` fields are
reset, which causes thumbnail dimensions to be incorrectly calculated.
Only draw thumbnails if both mentioned fields are non 0.
One case of copying image formats was not properly using BKE_image_format_copy.
To fix this for existing .blend file we need to do versioning, ensuring the curve
mapping is properly copied.
This patch unifies the names of math functions for different data types and uses
overloading instead. The goal is to make it possible to swap out all the float3
variables containing RGB data with something else, with as few as possible
changes to the code. It's a requirement for future spectral rendering patches.
Differential Revision: https://developer.blender.org/D15276
Fix by always testing unhandled double-click events as press events,
irrespective of the previous event type.
**Details**
Handling double-click events only ran when the previously pressed-key
matched the current pressed-key.
Originally when double-click support was added the previous type was
compared (ignoring it's press/release value) and while not necessary
it was harmless as it matched the check for double-click events being
generated.
As of [0] the logic for click/drag detection changed to ignore release
events as release this could interrupt dragging.
This made it possible to generate double-click events that failed the
`event->prev_press_type == event->type` comparison.
In these cases it was possible to generate double-click
events that would not fall-back to a 'press' value when unhandled.
[0]: 102644cb8c
If the some driver had been flagged as "invalid", the flag would not be
cleared when joining armatures which could lead to now valid drivers
still being flagged as invalid.
Now we clear this invalid flag on all drivers to force a recheck after
joining the armatures.
Add a `BKE_action_fcurves_clear(action)` function, which removes all the
Action's FCurves, and expose it as `ActionFCurves.clear()` in RNA.
This is more ergonomic than calling `remove` on f-curves until the list
is empty.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D14660
Add a poll message to the bone group operators, to explain they only
work in pose mode. Before, the buttons would be greyed out with no
explanation.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D15119
Adds a custom property panel for the active `Action` to the Dopesheet
editor. There was previously no way to edit these properties outside of
the Python API.
This panel will show up when
`context.active_object.animation_data.action` is set.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D14646
- Respect modifier keys (Shift press/release didn't change the case).
- Changing modifiers resets the timer instead of canceling key-repeat.
- Releasing keys (besides the key being repeated) resets the timer
instead of canceling key repeat.
This makes key-repeat behave the same way as GTK & WIN32 text input.
This patch suffixes Apple GPU device names with `(GPU - # cores)` so that variant GPUs with the same chipset can be distinguished. Currently benchmark scores for these M1 family GPUs are being incorrectly merged:
- M1: 7 or 8 cores
- M1 Pro: 14 or 16 cores
- M1 Max: 24 or 32 cores
- M1 Ultra: 48 or 64 cores
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D15257
Oneliner for T97961. Square sculpt brushes no longer fit
inside the radius circle, they now use the radius for
the square size.
{F13082514}
Note: original patch was modified to scale PBVH
search radius to avoid artifacts.
Differential Revision: https://developer.blender.org/D14974
Reviewed By: Joseph Eagar & Julien Kaspar
Ref: D14974
When GPU subdivision is used, and the modifier is not set to be applied
on the cage, UV selection is not synced with the face selection in the
viewport.
This happens because the extraction, despite being in edit mode, is set
to `MESH` instead of `BMESH` (or `MAPPED` in some cases) like for CPU
subdivision, and since the mesh is not always synchrnised with the BMesh
the edit mode flags are not always updated.
With GPU subdivision, when creating the `MeshRenderData`, the condition
`has_mdata && do_final && editmesh_eval_final != editmesh_eval_cage` is
true which forces the `MESH` extraction. Following comment in D14485,
this replace the `has_mdata` in the condition with `use_mapped` which
solves the issue.
Differential Revision: https://developer.blender.org/D15248
For example, the "id" attribute is stored as a named attribute.
If it doesn't exist already, `layer_index` was uninitialized, causing
issues with `CustomData_free_layer`. The fix is to use the generic
function to free a named layer in that case. Eventually the other
case will go away as T95965 is finished.
This reverts commit f0b4aa5d59.
This commit was making files to get bigger and bigger every time they
were saved and re-opened.
In the orphaned data in the outliner new collections would show up
there, even after continuously purging it. This would lead to a massive
file which get also very slow.
This problem will fix itself after a few re-open/re-saves of the files.
For anyone also experimenting this you can fix this faster by purging
the unused data multiple times in the file.
Example of file from the Project Heist (rev. 1014):
heist/pro/shots/010_opening/010_0050/010_0050.anim.blend
Adds an overlay option to show/hide the spline points & lines of masks in the Mask Editor.
It also moves the "smooth" option up (its position left of the selection dropdown was missleading).
{F11847272}
This emerged from a discussion in https://developer.blender.org/D12776
Differential Revision: https://developer.blender.org/D13314
This patch makes constant size a default for size edit operator of voxel remesh.
In turn, pressing CTRL now enables relative scale, the old default.
Patch also changes workspace status text entry with new additions. Note that it is a simple text and not an array of keymaps (for that further changes are needed)
{F13082567}
Reviewed By: Julien Kaspar & Joseph Eagar
Differential Revision: https://developer.blender.org/D14975
Ref D14975
The substep loop for rigid bodies causes unequal effects of force fields depedending on the substep setting, larger
substep counts cause a diminishing effect of force fields.
This is because the force to apply on a body is reset in Bullet after each step and needs to be recomputed. Without this
the body will just coast with constant velocity after the first substep. Since the per-step impulse with larger substep
counts is smaller, the effect is that more substeps cause a smaller total impulse.
The fix is to move external force calculation into the substep loop and update forces for each substep.
Note that this may be considered a breaking change, because the breaking commit rB1aa54d4921c2 has been in master for
a long time and after this fix force fields will generally have a much larger effect on rigid bodies (10x for the
default setting of 10 substeps).
Differential Revision: https://developer.blender.org/D15173
Baking assumed that color attributes could only have two configurations:
float color data type on vertices, or byte color type on face corners.
In reality the options can be combined to make four total options.
This commit handles the four cases explicitly with a somewhat
more scaleable approach (though this should really be C++ code).
This commit also changes some related error messages, tooltips,
and an enum name, in order to make the functionality more obvious.
Differential Revision: https://developer.blender.org/D15244
Do a more thorough search for strips that are not visible themselves,
but still influence the viewed time range.
The problem before was that tracks not immediately visible would not be
drawn at all. The strategy for fixing this was to simply include strips
that are visible only because of their extrapolation mode.
To do this, there is now a new function `get_visible_nla_strips` which
gives a first and last `NlaTrack` that needs to be drawn.
Tagging along with this is the removal of the strip index indicator from
the name on meta tracks. Because of the new structure of the code, it
would incur a performance penalty to restore the previous behavior
(requiring a linear search for the index). Since this number is of
virtually no utility to the user anyways (it has the look & feel of
developer debugging information), this is something I think we can
safely remove without regret.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D14738
When searching for the active NLA strip, avoid overwriting the found strip
pointer with NULL if it was already found in a previous iteration.
The active strip is searched for while looping over the NLA tracks. If the
active strip was found on a previous track, and not on the current track,
this would effectively set `actstrip = NULL`. This is now avoided.
Another benefit is that the search for the active strip is stopped as soon
as it's found, which should increase performance a tiny bit.
`find_active_strip_from_listbase()` expects two lists of strips with an
equal number of items. This is now not only documented, but also checked
for in an assertion.
Eevee rendered an empty image for aov nodes that weren't linked to
any other nodes. When connected the result was OK. The root cause was
that the AOV nodes were not marked as output node and pruned when not
connected to any other nodes. The pruning process is there to reduce
the complexity of the GLSL and improve compilation time and
execution time.
Regression introduced by {rBca37654b6327}. This commit reversed the
order of loading uniforms. The bloom renderpass used the previous
loading order to overwrite an existing uniform (bloomBaseAdd).
Due to the new ordering this doesn't work anymore where the render
pass outputted an image similar to the final image. This was fixed
by loading the correct value for bloomAddBase and remove the rewrite.
Instead of providing our own names for wayland headers, use the filename
component as the basis for the header names. This matches most reference
documentation for Wayland.
Also generate client protocols into a sub-directory `libwayland`,
instead of generating headers into the ghost directory. Making the
include path more specific & makes it easier to differentiate generated
headers from other build files.
Following what is done for LLVM. Being consistent feels good here.
Not strictly needed as the build here passed anyway, but it does
feel good to be consistent.
Since the occlusion input is going to be removed in EEVEE-Next, I just
added a temporary workaround. The occlusion is passed as SSS radius
as the Specular BSDF does not use it.
The final result matches 3.1 release
This adds a new parameter to the "Combined" overlay mode of the mask editor.
The "blending factor" allows users to blend the mask exterior with the original
footage to visualise the content of the mask in a more intuitive way. The
"Alpha" overlay is unaffected by this change.
The existing "Combined" overlay is used like before (covering everything
outside the mask in black), but can be blended with the slider in the mask
overlay to look at the exterior.
This is part of an effort to make mask editing more intuitive & easy to use:
https://developer.blender.org/T93097
Differential Revision: https://developer.blender.org/D13284
Addendum to previous fix, which was for point selection, this fixes the
face selection mode. The issue is caused by wrong flags used for paint
mode (the edit mode flag was always used). Also add back flag which was
accidentally removed in 16f5d51109.
* Rename "texture" to "data array". This has not used textures for a long time,
there are just global memory arrays now. (On old CUDA GPUs there was a cache
for textures but not global memory, so we used to put all data in textures.)
* For CUDA and HIP, put globals in KernelParams struct like other devices.
* Drop __ prefix for data array names, no possibility for naming conflict now that
these are in a struct.
Issue is caused by an off by one error which would map some edge loops to
the loops of some the next polygon in the list of polygon, which may not
be a topological neighbor.
The poll function with same semantic was defined in both screen and
mask space modules. The only reason for this seems to be that the
image editor needed a mask poll function which was private to the
mask module.
Make the mask editing poll functions public, avoiding code duplication.
Also, added a brief explanation about what the poll functions are
checking for.
No user-level changes are expected to happen.
Changing the cursor would intermittently close Blender's window
(without crashing).
This happened because the size of a cursor must be the a multiple of the
scale, for themed cursor this is always true but with custom cursors
it's not.
Separate theme scale from custom cursor scale to avoid this bug.
In the future we can support Hi-DPI custom cursors, for now they're
scale is always set to 1.
- Support showing & hiding the cursor without setting the buffer,
needed to switch between software and hardware cursor.
- Track the state of the software/hardware cursor.
This resolves glitches switching between cursors sometimes hiding the
cursor.
Fixes C++ .stl importer info output having no space between the
number and the word after it.
Reviewed By: Aras Pranckevicius
Differential Revision: https://developer.blender.org/D15240
The old Python OBJ importer had a (somewhat confusingly named) "Keep
Vertex Order -> Poly Groups" option, that imported OBJ groups as
"vertex groups" on the resulting mesh. All vertices of any face were
assigned the vertex group, with a 1.0 weight.
The new C++ importer did not have this option. It was trying to do
something with vertex groups, but failing to actually achieve
anything :) -- the vertex groups were created on the wrong object
(later on overwritten by "nomain mesh to main mesh" operation);
vertex weights were set to 1.0/vertex_count, and each vertex was only
set to be in one group, even when it belongs to multiple faces from
different groups. End result was that to the user, vertex groups were
not visible/present at all (see T98874).
This patch adds the import option (named "Vertex Groups"), which is
off by default, and fixes the import code logic to actually do the
right thing. Tested on file from T98874; vertex groups are imported
just like with the Python importer.
Reviewed By: Howard Trickey
Differential Revision: https://developer.blender.org/D15200
The new OBJ importer is producing "sharp" edges on some meshes that
should be completely smooth. Only observed on UV-Sphere type meshes
so far (see T97820).
I'm not 100% sure what is the root cause, but my theory was that
maybe due to limited number of float digits that are printed for
vertex normals in the file, the normals that are read in are not
always exactly 1.0 length. And then the Blender's "set custom loop
normals" function (which expects normalized inputs) wrongly marks
some edges as sharp.
Adding explicit normalization for the normals that are read from the
file fixes the wrongly-sharp edges in test cases from T97820. I
have not observed measurable performance impact in importing large
models (e.g. 6-level subdivided Monkey) that contain vertex normals.
Reviewed By: Howard Trickey
Differential Revision: https://developer.blender.org/D15202
This improves performance of the procedure executor on secondary metrics
(i.e. not for the main use case when many elements are processed together,
but for the use case when a single element is processed at a time).
In my benchmark I'm measuring a 50-60% improvement:
* Procedure with a single function (executed many times): `5.8s -> 2.7s`.
* Procedure with 1000 functions (executed many times): `2.4 -> 1.0s`.
The speedup is mainly achieved in multiple ways:
* Store an `Array` of variable states, instead of a map. The array is indexed
with indices stored in each variable. This also avoids separately allocating
variable states.
* Move less data around in the scheduler and use a `Stack` instead of `Map`.
`Map` was used before because it allows for some optimizations that might
be more important in the future, but they don't matter right now (e.g. joining
execution paths that diverged earlier).
* Avoid memory allocations by giving the `LinearAllocator` some memory
from the stack.
Since the custom target is a feature implemented at constraint
level, it is more appropriate to handle it in the common wrapper
functions, instead of modifying all the type specific callbacks
like get_constraint_targets and flush_constraint_targets.
Also, tag the special target with a flag so other code can
handle it appropriately where necessary.
This was split from D9732, and effectively reverts and refactors
part of D7437. This patch should cause no functional changes.
Differential Revision: https://developer.blender.org/D15168
This speeds up the node ~20% in common cases, e.g. when only the
X axis is used. The main optimization comes from not writing to memory
that's not used afterwards anymore anyway.
The "optimal code" for just extracting the x axis in a separate loop was
not faster for me. That indicates that the node is bottlenecked by
memory bandwidth, which seems reasonable.
getMainDisplayDimensions return values were scaled by the UI-scale,
instead of returning pixel values.
Also correct an error accessing the rotated monitor size,
which happened to be harmless as the value isn't used at the moment.
Previously the attribute name was only stored in the request for curves.
Instead, pass it as part of the "add request" function, so that it is
always used. Since the whole attribute pipeline is name-based,
this can simplify code in a few places.
Add a method to access the custom cursor from GHOST which is used
for drawing a software cursor. This means the knife tools cursor now
work as expected.
Although non-custom cursors are still not supported.
The current gnome-shell (v42.2) has a bug where grabbing the cursor
doesn't scale the region when confining it to the window.
For Hi-DPI displays this means the cursor may be confined to a quarter
of the window, making grab unusable.
Even though this has been fixed up-stream the issue remains in the
latest release - so workaround the problem by implementing window
confined grab using a software cursor.
This is only used gnome-shell for displays that use Hi-DPI scaling.
Previous code was rebuilding "name to material" map for each object
being imported. Which means O(N*M) complexity (N=object count,
M=material count). There was already a TODO comment suggesting that
a single map that's maintained for the whole import would be enough.
This commit does exactly that.
While importing Moana USD scene (260k objects, 18k materials) this
saves about 6 minutes of import time.
Reviewed By: Bastien Montagne
Differential Revision: https://developer.blender.org/D15222
Previous code was doing N collection syncs when importing N objects
(essentially quadratic complexity in terms of object count). New
code avoids all the intermediate syncs by using
BKE_layer_collection_resync_forbid and
BKE_layer_collection_resync_allow, and then does one
BKE_main_collection_sync + BKE_main_collection_sync_remap for the
whole operation. The things done on the importer objects that are
dependent on the sync happening (marking them selected) are done in a
separate loop after the sync.
Timings: importing Moana USD scene (480k objects) on Windows, VS2022
Release build, AMD Ryzen 5950X: 12344sec -> 10979sec (saves 22 minutes).
Reviewed By: Bastien Montagne
Differential Revision: https://developer.blender.org/D15215
Whenever the user edits the query in a search box, the active (highlighted)
result resets to the first. Previously, it would remain at the last
highlighted result, jumping around as the results update.
This is better than the previous behavior. If a user highlights a choice either
on purpose or by accidental mouse movement and continues to type, it is likely
that they are not looking for the currently highlighted choice, so setting it
to the top search result is more useful.
Differential Revision: https://developer.blender.org/D15211
Allow use of multiple fonts acting together like a fallback stack,
where if a glyph is not found in one it can be retrieved from another.
See D12622 for much more detail
Differential Revision: https://developer.blender.org/D12622
Reviewed by Brecht Van Lommel
llvm was using system python, rather than our copy
this went unnoticed on both linux and windows until
sergey tried to build the deps on a clean system with
no system python installed.
This commit is intended to be reverted within a few minutes.
commit 50adc860a652508570dbc7102ef288049a9ffed4
Author: Bastien Montagne <bastien@blender.org>
Date: Wed Jun 15 15:43:13 2022 +0200
Py API Doc: add runtime changelog generation to `sphinx_doc_gen.py`.
Optionally use `sphinx_changelog_gen.py` to dump current version of the
API in a JSON file, and use closest previous one listed in given index
file to create a changelog RST page for Sphinx.
commit 88fc683e78f866f1b3cda379c3b90e1f2916ce00
Author: Bastien Montagne <bastien@blender.org>
Date: Wed Jun 15 15:36:19 2022 +0200
Py API Doc: refactor changelog generation script.
Main change is to make it use JSON format for its dump files, instead of
some Python code.
It also introduces an index for those API dump files, mapping a blender
version to the relevant file path.
This is then used to automatically the most recent (version-number wise)
previous API dump to compare against current one, when generating the
change log RST file.
This commit is intended to be reverted within a few minutes.
commit 9442d8ef0f255d3c18b610b42aff71229904aaee
Author: Bastien Montagne <bastien@blender.org>
Date: Wed Jun 15 15:43:13 2022 +0200
Py API Doc: add runtime changelog generation to `sphinx_doc_gen.py`.
Optionally use `sphinx_changelog_gen.py` to dump current version of the
API in a JSON file, and use closest previous one listed in given index
file to create a changelog RST page for Sphinx.
commit f7fb537078641d2e2de015c08554f5281ce9debd
Author: Bastien Montagne <bastien@blender.org>
Date: Wed Jun 15 15:36:19 2022 +0200
Py API Doc: refactor changelog generation script.
Main change is to make it use JSON format for its dump files, instead of
some Python code.
It also introduces an index for those API dump files, mapping a blender
version to the relevant file path.
This is then used to automatically the most recent (version-number wise)
previous API dump to compare against current one, when generating the
change log RST file.
This splits out the code that samples points on a surface and the
code that initializes new curves. This code will be reused by D15134.
Differential Revision: https://developer.blender.org/D15216
When creating etc. a liboverride based on a partial hierarchy
pre-selection (e.g: override hierarchy on the rig object of a
character), now all linked data also using that rig (e.g. all meshes
deformed by that armature) will also automatically be overridden.
This si achieved by following dependencies in the reversed order (from
used IDs to using IDs) when we find one tagged for override.
In some cases, it can be usefull to distinguish when an entry has been
processed in which direction (`to` when handling ID pointers used by
the entry, `from` when handling ID using this entry).
Previous `MAINIDRELATIONS_ENTRY_TAGS_PROCESSED` tag is now a combination
of the two new ones.
This commit adds a Volume Cube primitive node. It outputs a volume that
contains a single "density" float grid. The density per voxel can be
controlled with a field that depends on the voxel position (using the
existing Position node). Other field inputs are not supported.
The density field is evaluated on every voxel.
Possible future improvements are listed in D15198.
Differential Revision: https://developer.blender.org/D15198
This commit is intended to be reverted within a few minutes.
commit 088497c870630d9b0d405aaa5fd796c77b380731
Author: Bastien Montagne <bastien@blender.org>
Date: Wed Jun 15 15:43:13 2022 +0200
Py API Doc: add runtime changelog generation to `sphinx_doc_gen.py`.
Optionally use `sphinx_changelog_gen.py` to dump current version of the
API in a JSON file, and use closest previous one listed in given index
file to create a changelog RST page for Sphinx.
commit 91801f47ad03f4739e97ae4b4edee09687e2cb85
Author: Bastien Montagne <bastien@blender.org>
Date: Wed Jun 15 15:36:19 2022 +0200
Py API Doc: refactor changelog generation script.
Main change is to make it use JSON format for its dump files, instead of
some Python code.
It also introduces an index for those API dump files, mapping a blender
version to the relevant file path.
This is then used to automatically the most recent (version-number wise)
previous API dump to compare against current one, when generating the
change log RST file.
This provides a workaround for the VR session stopping due to an error
in locating controller poses. The problem was that for the actions sync
on the first frame, the session's XrFrameState/predicted display time
had not been initialized yet, which led to an error in xrLocateSpace()
(the error was only observed for some OpenXR runtimes since the first
frame pose state would be inactive for other runtimes, skipping the
call to xrLocateSpace()).
The timing of action updates relative to frame state updates could be
reworked in the future, but for now simply check for a valid display
time to avoid an error on the first frame.
There is no need to have use/is in the final name. This is implicitly
represented by the checkbox already.
This does not change the Python API, only the names we show in the user
interface.
* Is Library Overridable -> Library Overridable
* Use Soft Limits -> Soft Limits
Differential Revision: https://developer.blender.org/D15217
On MacOS Eevee cyptomatte shaders fails as it doesn't ignore the `attrib_load`
parameter. I validated that removind the parameter works on Linux/AMD and MacOS
Intel. It could be that there are other platforms that require the dummy parameter.
If this should use a forward declaration and implement an emoty function in the
cryptomatte vertex shader.
This patch adds a 'Intersecting Edges' output with a boolean selection
that only gives you the new edges on intersections.
Will work on a couple of examples next, this should make some
interesting effects possible (including getting us closer to the "bevel-
after-boolean-usecase")
To achieve this, a Vector is passed to `direct_mesh_boolean` when the
iMesh is still available (and intersecting edges appended), then from
those edge indices a selection will be stored as attribute.
Differential Revision: https://developer.blender.org/D15151
This allows using a shortcut from the file browser to edit the directory
path. The shortcut Ctrl + L is quite standard and used in multiple
GNU/Linux desktop desktop environments, Windows, as well as most web
browsers. Safari on macOS uses Cmd + L.
Reviewed by: Jacques Lucke, Julian Eisel
Differential Revision: https://developer.blender.org/D15196
Part of T98560.
See https://wiki.blender.org/wiki/Source/Interface/Views
Adds all the basic functionality needed for grid views. They display
items in a grid of rows and columns, typically with a preview image and
a label underneath. Think of the main region in the Asset Browser.
Current features:
- Active item
- Notifier listening (also added this to the tree view)
- Performance: Skip adding buttons that are not scrolled into view
(solves performance problems for big asset libraries, for example).
- Custom item size
- Preview items (items that draw a preview with a label underneath)
- Margins between items scale so the entire region width is filled with
column, rather than leaving a big empty block at the right if there's
not enough space for another column (like the File and current Asset
Browser does it).
- "Data-View Item" theme colors. Not shown in the UI yet.
No user visible changes expected since the grid views aren't used for
anything yet.
This was developed as part of a rewrite of the Asset Browser UI
(`asset-browser-grid-view` branch), see T95653. There's no reason to
keep this part in a branch, continuing development in master makes
things easier.
Grid and tree views have a lot of very similar code, so I'm planning to
unify them to a degree. I kept things separate for the start to first
find out how much and what exactly makes sense to override.
The call to `get_component_for_write` would sometimes copy the mesh
even when the mesh is replaced with itself. The `replace_mesh` method
handles that case already, so just use that instead.
Use more descriptive names for some of the two character variables.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D15192
There were two problems here:
1) Console warnings due to brush was None.
2) It was impossible to recreate a brush.
This patch fixes both issues and it is now possible to recreate any brush.
Differential Revision: https://developer.blender.org/D15213
Reviewed by: @dflelinto
Add a RNA update function for output video codec setting to update
properties that are incompatible with defaults.
Previously video output bitrate settings were omitted because of the
Constant Rate Factor (CRF) default. CRF setting for video codec is only
available for H264, MPEG4 and WEBM/VP9 outputs, so for the others
changing encoder quality mode to constant bitrate (CBR) as CRF is not
supported.
Reviewed By: ISS, mano-wii
Differential Revision: https://developer.blender.org/D15201
This commit:
* Removes the popup to choose the root collection when called with a
linked object selected (in typical cases there is only one valid
option, if more then the operator fails and report to the user).
* Ensures that the linked reference of newly overridden collections are
also removed from the ViewLayer (i.e. their local parent collections).
This also renames Hair Curves to Curves. Meaning that until we get
rid of the old curve type we will have both of those entires there:
* Curve
* Curves
This rna enum is used among other things in the driver UI to pick
which data-block you want the property from.
Regression in [0] unintentionally renamed COORDINATES.
There was a naming discrepancy when two (nearly) identical arrays,
de-duplicating them caused the error.
[0]: 94444aaadf
- Avoid ambiguity which caused these values to be confused, use `mval`
for region relative mouse coordinates, otherwise `event_xy`.
- Pass region relative coordinates to sample_detail_dyntopo &
sample_detail_voxel as there is no reason to use screen-space values.
- Rename invalid use of mval for screen-space coordinates.
Wayland doesn't support accessing the position making functionality that
would map events to other windows fail, sometimes considering windows
overlapping when they weren't (as all window positions were zeroed).
Disable dragging between windows when accessing the window the position
isn't supported.
Finding the output with the largest scale now checks fractional scaling.
While this is only a minor difference in most cases, it makes the scale
deterministic instead of depending on the order outputs are added.
Some I/O code paths (Collada, OBJ) were using mat3_from_axis_conversion
followed by transpose_m3, instead of swapping the axis arguments
which achieves exactly the same result.
Reviewed By: Aras Pranckevicius
Differential Revision: https://developer.blender.org/D15158
Error in a4a7af4732.
To allow deleting tree elements while iterating, the new iterators would
get needed data out of the tree element before calling the iterator
callback. This included the info if the element is open or collapsed. So
if the callback would open or collapse elements, the iterator wouldn't
respect that change. Luckily the way the open/collapsed state is stored,
we can still query it after the callback is executed, without having to
access the (possibly freed) tree element.
OBJ vertex color related tests were not producing identical results
across various platforms, primarily due to sRGB<->Linear color space
conversions.
While D15193 has just made the color space conversion accuracy match
much closer between platforms, it's still not 100% the same.
This change reduces the amount of decimal places used for exporting
vertex colors, to 4 digits (down from 6). Vertex normals were
already always printed with 4 digits, and colors are conceptually
similar (usually 0..1 range etc.).
This makes the vertex color tests pass again, so re-enable them
after adjusting to 4 decimals expectations.
srgb_to_linearrgb_v3_v3 is using an approximation of powf that is
SIMD. However, while the accuracy of it is ok, a larger issue is that
it produces different results on Intel compared to ARM architectures.
On ARM (e.g. AppleSilicon), the result of the SIMD code path is much
closer to the reference implementation. This seems to be because of
_mm_rsqrt_ps usage in _bli_math_fastpow512. The ARM/NEON code path
emulates inverse square root with a combination of vrsqrteq_f32
followed by two Newton-Raphson iterations, because blender uses the
SSE2NEON_PRECISE_SQRT define.
This commit adds similar NR iterations to the "actual SSE" code path
as well.
Max error of srgb->linear->srgb conversion roundtrip goes from
0.000211 down to about 0.000062.
Reviewed By: Sergey Sharybin
Differential Revision: https://developer.blender.org/D15193
I'm using the tool icons for the brush themselves.
Note: This includes a few brushes that are only defined in D15134.
Those are simply the icons rendered with a world background of #282828.
This commit is intended to be reverted within a few minutes.
commit 39ffb045a52d16994c1c87ccf3249ff3222a8fca
Author: Bastien Montagne <bastien@blender.org>
Date: Wed Jun 15 15:43:13 2022 +0200
Py API Doc: add runtime changelog generation to `sphinx_doc_gen.py`.
Optionally use `sphinx_changelog_gen.py` to dump current version of the
API in a JSON file, and use closest previous one listed in given index
file to create a changelog RST page for Sphinx.
commit fbe354d3fcfa2ad1ed430c3c27e19b99a0266dda
Author: Bastien Montagne <bastien@blender.org>
Date: Wed Jun 15 15:36:19 2022 +0200
Py API Doc: refactor changelog generation script.
Main change is to make it use JSON format for its dump files, instead of
some Python code.
It also introduces an index for those API dump files, mapping a blender
version to the relevant file path.
This is then used to automatically the most recent (version-number wise)
previous API dump to compare against current one, when generating the
change log RST file.
There is a check to be sure no system python is in the path
on windows to be sure deps do not accidentally build against it.
The problem arises on certain versions of windows that ship a
python.exe that just opens up the MS store to download their
python version. The check takes this to be a real python
installation and refuses to build.
This change fixes the issue by looking for pythonw.exe which a
real python install would have, but the MS store opening one that
windows ships (as of now) would not.
Whats happening is that the modifier keeps adding new frames to the evaluated object resulting in an exponential increase. This is because when preparing the data for the modifiers we only copy visible strokes to the eval object. But the modifiers do not consider visibility and will generate the mirrored strokes even for layers that are hidden. Because those layers have not been copied (only their structure) we run into this issue.
The solution is always copy the active frame of all layers (even if the layer is hidden).
While dragging assets over a catalog, we would show both the name and
the full catalog path in the drag tooltip. For catalogs at the root
level (catalogs without parents) the name and the full path are the
same, so it would just display the name twice. This is more confusing
than helpful. Now skip displaying the full path in that case.
Reviewed by: Julian Eisel
Addresses T92855
Differential Revision: https://developer.blender.org/D15190
Re-organize de-selection so that there is less conflict between tracking
and masking operators.
Still not fully ideal: the LMB selection does not de-select everything
now since the `mask.select` with `deselect_all` is only added to the
keymap when the RMB is the select mouse. While this is sub-optimal, this
seems to be how mask selection behaved in the Image Editor in 3.1.
Not sure it worth looking into a more complete fix, as it will likely be
too big to be safe for a corrective release.
Differential Revision: https://developer.blender.org/D15183
Rename get_window to window_from_surface and return a
GHOST_WindowWayland instead of an GHOST_IWindow since most callers
needed to cast. It also makes sense that an call for accessing windows
would return the native type.
- Initialize values in the struct declarations
(help avoid accidental uninitialized struct members).
- Use `wl_` prefix for some types to avoid e.g. `output->output`.
- Use `_fn` suffix for locally defined function variables.
- Use `_handle_` as separator for handlers, making function names easier
to follow as this separates the handler name from the interface.
- Add doxy sections for listeners in GHOST_WaylandWindow.cpp.
Intel iGPU (HD4000) supports OpenGL 4.4 but doesn't support conservative
depth. (GL_ARB_conservative_depth). This change will only check for the
availability of the extension.
- Remove unnecessary braces in switch statements
- Move `default` to the end of other switch items
- Use camel case for type names
- Use `BLI_assert_unreachable()`
GHOST_GetDPIHint now returns a value that takes fractional scaling into
account. Otherwise the integer scale is used since Wayland's API's use
integer scale values exclusively.
Use the same method as SDL to calculate the fractional scale.
Function `SEQ_transform_handle_overlap` was declared in sequencer module
header file, but it was defined in editor/transform module.
Move definition to sequencer module.
Function `SEQ_transform_seqbase_shuffle_time` did not have access to
strip effects, and therefore could not handle their animation. Since
now transformation knows what strips can't be directly moved, but their
position depends on other strips, this collection of strips is passed as
argument, so animation can be offset correctly.
The comparison between dot products of each point of the poly were
not taking into consideration negative values. FLT_MIN was used rather
than -FLT_MAX due to a misunderstanding of the FLT_MIN definition.
Maniphest Tasks: T98718
Differential Revision: https://developer.blender.org/D15161
PBVH draw has an optimization where it only sends the
active attribute to the GPU in workbench mode. This
fails if multiple viewports are open with a mix of
workbench and EEVEE mode; it also causes severe lag
if any workbench viewport is in material mode.
There are two solutions: either add the code in sculpt-dev
that checks for EEVEE viewports at the beginning of each frame,
or integrate pbvh draw properly inside the draw manager
and let it handle which attributes should go to the GPU.
Don't show an error if no operator property is set at all that can be
used to find an image file or ID for dropping. The caller can decide if
this is an error that needs reporting or a valid case, like it is here.
Caused by oversight in 7afcfe111a - code relied on fact, that strip
boundary holds old value until updated.
Calculate new offsets based on stored orignal offsets.
It's potentially possible that the attribute duplication could fail,
for whetever reason. There is no great reason not to be safe in
this high-level code.
Use a name argument, for the same reasons as 6eea5f70e3.
Also reuse the layer and unique name creation in `BKE_id_attribute_new`
instead of reimplementing it. Also include a few miscellaneous cleanups
like using const variables and `std::string`.
The `update_active_strip_from_listbase()` function took meta-strips in
the "source" list into account, but didn't recurse into the
corresponding meta-strip of the "destination" list. This is now fixed.
`update_active_strip_from_listbase()` needed a few changes to resolve
the issue:
- It was renamed to `find_active_strip_from_listbase()` to limit its
reponsibility to just finding the active strip. It now leaves the
assignment to the caller. This reduces the number of parameters by 1
and makes recursion simpler.
- The destination strips are now, like the source strips, passed as
`ListBase`, so that both source & dest can be recursed simultaneously.
The callback would just assume that it's only called on materials, which
may in fact not be the case. It could also be called for other ID types
and layer collections (see `outliner_do_libdata_operation()`). Properly
check this now.
Also avoid faling silently when the object or object-data to unlink from
couldn't be determined. Report this to the user. Operators that just do
nothing are confusing.
This issue was only exposed by ba49345705. The ID pointer of the
material's parent tree-element wasn't actually pointing to an ID, but to
the list-base containing the IDs. It was just unlikely to cause issues
in practice, although an assert was thrown.
Just don't do anything if the object or object-data to unlink the
material from could not be found. The following commit will introduce a
error message about this.
The internal function relies on `CustomData_copy_data_layer` currently,
which doesn't work for BMesh. Support could be added as a special case
for BMesh, but in the meantime avoid bugs by just changing the poll.
Instancing with geometry nodes uses just the evaluated Mesh, and ignores the
Object that it came from. That meant that it would try to look up the subsurf
modifier on the instancer object which does not have the subsurf modifier.
Instead of storing a session UUID and looking up the modifier data, store a
point to the subsurf modifier runtime data. Unlike the modifier data, this
runtime data is preserved across depsgraph CoW. It must be for the subdiv
descriptor contained in it to stay valid along with the draw cache.
As a bonus, this moves various Mesh_Runtime variables into the subsurf runtime
data, reducing memory usage for meshes not using subdivision surfaces.
Also fixes T98693, issues with subdivision level >= 8 due to integer overflow.
Differential Revision: https://developer.blender.org/D15184
The old text was suggesting to run `BLENDER_TEST_UPDATE=1 ctest` for
failed tests. Now it's more clear that this is for the regeneration of
reference (ground truth) images, and that it will not touch passing test
cases.
It now also mentions to commit the new reference images to SVN, driving
the point home that this is for updating those, and not for making
failing tests succeed in general.
Over-the-shoulder reviewed by: @sergey
Ensure the "null" node graph, which is the root node of the export
graph, always exists.
The crash occured when "Use Settings For" was set to Render, "Visible
Objects Only" was ticked, and a single parent object is in the scene but
disabled for render.
Because the only object attached to the root of the project was disabled
for export, there was no "null" root node added to the export graph.
This change will always add an empty "null" node with no children to the
graph at the start. Other objects will get added to its children as
required.
Reviewed By: sybren
Maniphest Tasks: T85729
Differential Revision: https://developer.blender.org/D15182
Designate private variable names as described by the style guide,
and also add `num` at the end of variable names rather than at
the beginning, as discussed in T85728.
The value of disabled buttons shouldn't be changed through dropping onto
it. Check for the disabled state in the drop operator poll, so the
dragging code will change the cursor to show that dropping isn't
possible at the given cursor location.
* Add a new keymap for `curves.*` operators. This is mainly for
edit mode operators, but since we don't have edit mode yet,
these operators are also exposed in sculpt mode currently.
* Fix the naming of the "sculpt curves" keymap.
Some OBJ files out there (see T98782) have face definitions that
contain vertex normal indices, but the files themselves don't
contain any vertex normals. The code was doing a "hey, that's an
invalid index" and skipping these faces. But the old python importer
was silently ignoring these normal indices, so do the same here.
Reviewed By: Howard Trickey
Differential Revision: https://developer.blender.org/D15177
Adds support for vertex colors to OBJ I/O.
Importer:
- Supports both "xyzrgb" and "MRGB" vertex color formats.
- Whenever vertex color is present in the file for a model, it is
imported and a Color attribute is created (per-vertex, full float
color data type). Color coming from the file is assumed to be sRGB,
and is converted to linear upon import.
Exporter:
- Option to export the vertex colors. Defaults to "off", since not
all 3rd party software supports vertex colors.
- When the option is "on", if a mesh has a color attribute layer,
the active one is exported in "xyzrgb" form. If the mesh has
per-face-corner colors, they are averaged on the vertices.
Colors are converted from linear to sRGB upon export.
Reviewed By: Howard Trickey
Differential Revision: https://developer.blender.org/D15159
- Apply the scale before converting cursor coordinates to int.
- Store sub-pixel cursor coordinates internally since
this is what Wayland uses.
- Use `wl_fixed_t xy[2]` for storing coordinates as it simplifies
assigning/passing x/y coordinates to an argument / variable.
- Also fix drag-and-drop coordinates which ignored scale.
Add support for tablet pressure, tilt and type detection
(eraser, pen.. etc).
There is currently an inconsistency where the tablets cursor is scaled
larger than the mouse cursor (when the UI is scaled). Although there
doesn't seem to be a way to control this from the client.
- Stop once `ENDB` is reached, as files could include additional data.
- Prevent the possibility of an infinite loop from malformed BHEAD
blocks that could seek backwards in the file.
Before this, we would build the sub-trees of some elements, just to
remove them afterwards. In big files, this would sometimes build ten
thousands of elements unnecessarily. Now support not building those
sub-trees in the first place.
Performance tests in a Sprite Fright production file (release build):
- View Layer display mode, reduced Outliner tree rebuilding from ~45ms
to 12-17ms
- Library Overrides display mode, Hierarchies view, reduced tree
rebuilding from 5-6s(!) to 220ms
Caused by `seq_open_anim_file` early returning if anim struct exists,
exen if it's not initialized. To ensure `anim` struct is initialized
when `openfile` argument is true, don't do early return.
Length was set properly when added, but it was clamped by function
`seq_time_effect_range_set`
Add early return for generator effects where offsets can be used
normally.
The "bl_order" property on add-on UI panels can be used to put
them in a specific order regardless of the order of registering.
This patch makes this ordering also possible for panels inside panels.
Differential Revision: https://developer.blender.org/D15174
The documentation for `HierarchyIterator::weak_export` mentions a feature
that was removed at some point. Another example is used to illustrate its
functionality.
No functional changes.
The problem with T98683 is that sampling interval can be set to very small,
resulting in very dense points. This patch attempts to optimize that a little bit.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D15180
- Use uintxx_t for all 8/16/64 bit integer types.
- Removed prepend_edge_direct thingy which is no longer needed in current edge iterator model.
- Minor code path adjustments like only copies view vector when necessary etc.
- Correctly handle ies==NULL in edge cutting function.
- White spaces and comments etc.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D15181
This patch adds a new mode of gpu capture (env var `CYCLES_DEBUG_METAL_CAPTURE_SAMPLES`) to capture a block of dispatches between "reset" calls. It also fixes member data naming inconsistencies and adds some missing OS version checks.
Screenshot showing .gputrace capture in Xcode 14.0 beta (using `CYCLES_DEBUG_METAL_CAPTURE_SAMPLES="1"` and `CYCLES_DEBUG_METAL_CAPTURE_LIMIT="10"`):
{F13155703}
Reviewed By: sergey, brecht
Differential Revision: https://developer.blender.org/D15179
Found via codespell -q 3 -S ./intern,./extern -L ans,ba,bording,datas,eiter,fiter,hist,inout,lod,ot,parm,parms,pixelx,pres,te
Contributed by luzpaz.
Differential Revision: https://developer.blender.org/D15155
Moves code for managing dragging data from buttons to a separate file.
This way all this closely related code is in one location, making it
easier to see how it all relates, and easier to find.
The normals flags were not setup properly which made normals for all
elements (vertices, faces) to be drawn when using the normals overlay.
Also remove usage of uints for the flag in the APIs.
Moved gpu vert format checking outside of pbvh_update_draw_buffers,
which isn't called in every code path of BKE_pbvh_draw_cb. This led
to the draw cache being partially populated by old draw buffers
that were subsequently freed, causing a crash.
Only the Shift key was working with GHOST's getModifierKeys method.
Now all modifiers are accessible, since there is no way of detecting
left/right modifiers both are set.
Address two glitches on window creation:
- The DPI was zero until the `surface_enter` callback ran which happens
after redrawing, causing the splash to display with incorrect scale
before refreshing once the callback had run.
- The window scale was always 1, even when all outputs were HI-DPI.
Now the maximum scale of all outputs is used. This isn't fool proof in
the case of multiple monitors having different scales, however it
doesn't seem possible to detect the scale used ahead of time
(details in code-comment).
The delaunay2d function, with mode CDT_CONSTRAINTS_VALID_BMESH_WITH_HOLES
sometimes didn't eat away all of the edges. Doing a prepass to remove
the outer edges until they hit the constraints solves this problem.
- Use a window method to handle updating the window after scale changes.
This avoids the need for methods that return mutable references to
DPI & scale.
- Remove window.outputs() method that returned window->system->outputs
as it is misleading to expose these as window outputs when the outpurs
returned are all known outputs.
- Use a vector instead of an unordered_set to store window outputs,
while a 'set' does make sense, it means the outputs can't be accessed
in the order they're added which may be useful for further changes.
- Use early returns.
This patch does code clean ups in `LineartRenderBuffer` because it's
grown kinda big and we need better way to organize those variables inside.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D15172
This is a partial fix for T90535.
Added Material Name Collision USD import menu option, to specify
the behavior when USD materials in different namespaces have the
same name.
The Material Name Collision menu options are
- Make Unique: Import each USD material as a unique Blender material.
- Reference Existing: If a material with the same name already
exists, reference that instead of importing.
Previously, the default behavior was to always keep the existing
material. This was causing an issue in the ALab scene, where
dozens of different USD materials all have the same name,
usdpreviewsurface1, so that only one instance of these materials
would be imported.
Reviewed by: Sybren
Differential Revision: https://developer.blender.org/D14869
Conceptually animated/driven properties are not controlled by the
liboverride system anymore, even though they may generate override
operations. So consider them as part of the 'system overrides' category,
and hide them by default in the Outliner.
Usefull to easily trim away the 'aray index' part of an RNA path, e.g.
when searching for an FCurve (which never contains that index part in
its RNA path).
The operator set the color but the factor of the mix value was not updated and as the default value was 0, the color was not vivible and only worked when the stroke was previously painted.
Resolves unit tests failure since the D15085.
Also addressed API documentation and formatting format.
Differential Revision: https://developer.blender.org/D15162
Caused by {rB6a3c3c77b3eb}.
Displacement and wave were tagging the original mesh normals dirty,
instead the result's normals need tagging. Seems like a typo in above
commit (similar to rBfe43c170831f).
Maniphest Tasks: T98727
Differential Revision: https://developer.blender.org/D15165
There were two problems dropping files into blender:
- The inputs `focus_pointer` was NULL, causing a crash.
- The wl_data_device_manager version was set to 1, causing the Blender
window to close (when dropping files in gnome-shell 42).
Resolve by storing the drop surface separately from the pointer surface
and bump the device manager version to 3.
Many errors involving mis-use or unexpected situations report an
error and close Blender's window buy don't crash, making it difficult
to track down when the error occurs.
Define an error handler prints the error and a back-trace,
it can also be useful for setting a break-point
By checking the index value first instead of a full fledge string
comparision in `BKE_fcurve_find`, we can make that code significatly
faster (from about 10% in a Heist production file to over 45% in a
heavily animated test file).
While this code was already very fast (a few microseconds per call
typically), it gets called a lot from the UI (several hundreds of time
per refresh), among other things.
NOTE: the `UNLIKELY` hint is responsible for 25% to 30% of the
speed improvement.
Add a method to remove points from the new curves type, just like
the existing curve removal function. No functional changes are expected.
The code is simpler because all data is just stored as attributes, but
also different because the point data for all curves is stored in the same
arrays.
Similar performance improvements as other commits in T95443 are
expected, expecially for cases where there are many small curves.
Differential Revision: https://developer.blender.org/D15130
This commit changes the tool tip for the "Copy To Selected Button" operator.
The exiting tool tip for this operator suggests that it will "copy property to selected objects or bones".
However, it will only copies the property value to the selected objects or bones if the property already exists on the selected items.
It does not copy the property.
Differential Revision: https://developer.blender.org/D14528
It's an old behavior. Not really considered a bug.
But snapping to faces is already supported in this case.
And allowing snapping to other elements is not disruptive.
The software cursor was being enabled with absolute events,
causing a problem with absolute tablet events.
This caused both cursors to be visible at once when using a tablet
(with D15152 applied).
Curves can have a Mesh evaluated, but only objects of type Mesh have
EditMesh.
This bug is harmless because `sctx->editmesh_caches.remove(value)` only
works with pointers and `BKE_editmesh_from_object(ob_eval)`, even though
it doesn't actually return a `BMEditMesh`, it still returns a pointer
that doesn't exist as a key.
This patch fixes T90120. The fundamental problem is that 2d and the old 3d paint modes share a single Paint struct, ToolSettings->imapaint. This patch is a temporary fix until the new 3d paint mode (which has its own Paint struct) is released.
The patch works by listening for `NC_SCENE|ND_MODE` inside `image_listener` in `space_image.c`. It does not use `ED_space_image_paint_update` since that requires a `bMain.` Instead it calls `paint_cursor_start` (which is promoted to `ED_paint_cursor_start`). `image_paint_poll` is also promoted to an `ED_` function.
Reviewed By: Campbell Barton
Differential Revision: https://developer.blender.org/D14946
Ref D14946
This patch adds support for PBVH drawing in EEVEE.
Notes:
# PBVH_FACES only. For Multires we'll need an API to get/cache attributes. DynTopo support will be merged in later with sculpt-dev's DynTopo implementation.
# Supports vertex color and UV attributes only; other types can be added fairly easily though.
# Workbench only sends the active vertex color and UV layers to the GPU.
# Added a new draw engine API method, DRW_cdlayer_attr_aliases_add. Please review.
# The vertex format object is now stored in the pbvh.
Reviewed By: Clément Foucault & Brecht Van Lommel & Jeroen Bakker
Differential Revision: https://developer.blender.org/D13897
Ref D13897
Fixes T97706
Adds operator to duplicate the active color attribute layer.
Adds `"Color Attribute Specials"` menu to color attribute ui to access the `"geometry.color_attribute_duplicate"` operator.
Internally adds a function that duplicates a referenced CustomDataLayer
- `BKE_id_attribute_duplicate` mostly copies the existing `BKE_id_attribute_new`
- but gets the type and domain from the referenced layer
- and copies the data from the old layer into the new layer
Reviewed By: Joseph Eagar & Hans Goudey & Julien Kaspar
Differential Revision: https://developer.blender.org/D14823
Ref D14823
Introduces an option for BKE_unit_value_as_string to skip stripping of zeroes, thus reducing flickering when using edit voxel size widget.
{F13125416}
Reviewed By: Julien Kaspar & Joseph Eagar
Differential Revision: https://developer.blender.org/D15085
Ref D15085
The generic bounds utility used an incorrect initial value. The value
cannot be zero-initialized, because that breaks the case where all
values are greater than zero.
RNA camera code did not handle path for its image/movieclip users
sub-data, and moviclip RNA struct definition did not have a rna path
function at all.
This commit ports the "Set Spline Type" node to the new curves type.
Performance should be improved in similar ways to the other refactors
from the conversion task (T95443). Converting to and from Catmull Rom
curves is now supported. There are a few cases where a lot of work can
be skipped: when the number of points doesn't change, and when the
types already match the goal type.
The refactor has a few other explicit goals as well:
- Don't count on initialization of attribute arrays when they are
first allocated.
- Avoid copying the entire data-block when possible.
- Make decisions about which attributes to copy when changing curves
more obvious.
- Use higher-level methods to copy data between curve points.
- Optimize for the common cases of single types and full selections.
- Process selected curves of the same types in the same loop.
The Bezier to NURBS conversion is written by Piotr Makal (@pmakal).
Differential Revision: https://developer.blender.org/D14769
The initial point count check was only being done for Bezier curves.
This revision fixes T98624 by adding the check for NURBS curves as well.
Reviewed By: HooglyBoogly
Maniphest Tasks: T98624
Differential Revision: https://developer.blender.org/D15140
This could spam the console with errors (potentionally slowing down in
cases).
Was added in rBeae36be372a6, but not used.
Maniphest Tasks: T98565
Differential Revision: https://developer.blender.org/D15113
This mirrors the C++ attribute API better, separates the implementation
of attributes from CustomData slightly, and makes functions simpler,
clearer, and safer.
Also fix an issue with removing an attribute caused by 97712b018d
meant the first attribute with the given type was removed instead of
the attribute with the given name.
Converting an attribute does not work from edit mode because
there is no attribute API implemented for BMesh, so disable the
operation in that mode and add a poll message.
Active camera is a property of Scene, so need to take scene changes into
account for such drivers to work reliably.
The fix covers all the common cases of such configurations, but some of
them might not be yet fully supported. Mainly cases when the target ID
is not covered by the copy-on-write mechanism.
There is a fuller explanation available in the code for the ease of reading
by the future generations.
Differential Revision: https://developer.blender.org/D15146
The following CMake options have been added (enabled by default),
except for the lite build configuration.
- WITH_IO_STL
- WITH_IO_WAVEFRONT_OBJ
- WITH_IO_GPENCIL (for grease pencil SVG importing).
Note that it was already possible to disable grease pencil export
by disabling WITH_PUGIXML & WITH_HARU.
This is intended to keep the lite builds fast and small for building,
linking & execution.
Reviewed By: iyadahmed2001, aras_p, antoniov, mont29
Ref D15141
As Wayland doesn't support moving the cursor, draw a cross-hair cursor
at the location used by Blender.
Without this, the cursor was locked at the location where grab started,
making some actions unusable since the cursor location was invisible.
Resolves T77311.
Grab which didn't wrap would lock the cursor, making actions such
as resizing areas lock the cursor in-place.
Confine the cursor to the window instead.
This behavior was also used for X11 when grabbing the cursor was first
supported but could lock the system if Blender froze while grabbing so
it was disabled [0].
For Wayland this shouldn't be a problem as compositors implement grab
in a way that prevents the client from locking the system.
[0]: 3e3d2b7a4c
More information in the svn log. But basically the smooth brush
is re-using the previous one we had for hair, and the density is
representing the hair root points that are removed to reach the
desired density.
Those brushes are used by D15134.
Removal of BLT_lang_is_ime_supported which is always returns true and
is no longer needed.
See D11800 for more details.
Differential Revision: https://developer.blender.org/D11800
Reviewed by Campbell Barton
If a geometry does not have CustomData for a certain domain,
it may still have CustomData on other domains. In that case
we need to continue to the other domains instead of returning.
This worked for meshes because the domains are all at the
start of the `info` array. It didn't work for curves.
`math::divide_ceil` is just the vector implementation of `divide_ceil_u`.
`math::ceil_to_multiple` is similar but finaly multiply by the divisor.
It is handy to handle tile buffers resolutions.
This bug was unreported. This was triggering a linking error caused by
the vertex shader not having a local version of `attr_load_temperature_post`
and `attr_load_color_post`.
This was caused by the `copy_m4_m4` trying to copy the `object_to_texture`
from `drw_grid` which was `nullptr`.
Fixing this also exposed that rendering such volumes (without any valid
grid attributes) is not supported and we should follow what Cycles does.
Differential Revision: https://developer.blender.org/D15147
Though no nodes have descriptions currently, this patch makes it
possible to add descriptions that display in the add menu, for
custom node systems and existing builtin nodes.
Differential Revision: https://developer.blender.org/D14963
Viewport drawing does not support a per point radius attribute yet.
Instead, it has a fixed set of radius parameters that are used for all
curves in the same object. Now those radii are retrieved from the
radius attribute of the points on the first curve. This allows users
to control the radius of curves to some degree until proper per-point
radius is supported.
This function only checked for uniqueness in the current domain,
while attribute names should be unique among all domains within
a geometry.
Differential Revision: https://developer.blender.org/D15144
If `cancel` is `false`, `NULL` `inter` pointer dereferencing could occur.
Currently I haven't found a case where this can happen.
But it's best to avoid.
Add three operators to the Collections properties panel:
- `object.instance_offset_to_cursor`, which is already available from
the Object properties panel. The operator works on the active
collection, though, so it's weird to not have it in the Collections
panel.
- `object.instance_offset_from_object` is a new operator, which performs
the same operation as above, but then based on the active object's
evaluated world position.
- `object.instance_offset_to_cursor` is also new, and performs the
opposite of the first operator: it moves the 3D cursor to the
collection's instance offset.
The first two operators make it easier to set the instance offset. The
last operator makes it possible to actually see the offset in the 3D
viewport; drawing it using some overlay could also work, but that would
be more effort to get right, and then snapping the 3D cursor would still
be useful.
The operators are placed in a popup menu, as to not clutter the
interface too much with various buttons.
Reviewed By: dfelinto, eyecandy
Differential Revision: https://developer.blender.org/D14966
Those cyclic dependencies (lib_A depends on a texture from lib_B, which
links geometry from lib_A) are bad, but previous code did not always
helped much in idendtifying to actuall issue point.
Now, reduce maximum 'recursion' level to 100 (this should already never
be reached in practice), and additionally report warnings when reaching
level 90, so that user gets more context data to identify more easily
the culprit.
This avoid leaving a `GPUMaterial` in a `GPU_MAT_QUEUED` state which would
block rendering.
Fix T98603: Hang when saving project in material preview mode
Maniphest Tasks: T98603
Differential Revision: https://developer.blender.org/D15135
Good side effect of the change is that it makes it so that the
size of an array is more likely to be calculated at a compile time.
More ideally we'll be using bli::Array instead of the bare array,
but that is outside of the scope of this change.
NOTE: this patch originated in T98015 which was split into multiple
reports. While it could be split into multiple patches these are very
much related so keeping as one for now
This patch fixes the following issues:
[1] autokeying transforms in preview only creates keyframes if there is
an FCurve already
[2] autokeying transforms in preview only creates keyframes for
rotation/scale if rotating/scaling around cursor (should keyframe
position as well)
[3] autokeying transforms in preview does not work during animation
playback
For [1], a param was added to `ED_autokeyframe_property` which can tweak
its default behavior of only creating keyframes on already keyed
properties (which was fine because this is mostly called from buttons
where this behavior is desired). Callers such as gizmos (or the VSE in
our case) can use this additional param so that keyframes are also
created on "not-yet-keyframed" properties.
For [2], the pivot is checked and position properties also keyed if
necessary (which is also consistent with the way objects are keyed in
the 3DView)
For [3], `animrecord_check_state` was changed to be able to work on
scenes as well and the transform system in the VSE preview was made
aware of the screen's `animtimer`.
NOTE: there are still things to be improved for keyframing in the VSE,
the most obvious is probably a `keyframe_insert` operator (with
keyingsets)
Fixes T98429, T98430, T98431
Maniphest Tasks: T98015, T98431, T98430, T98429
Differential Revision: https://developer.blender.org/D15047
To match the existing Python .obj importer, and to make it easier for
the user to determine which object is which, use the filename for the
default object name instead of "New object".
Differential Revision: https://developer.blender.org/D15133
Since [0], transform gizmos are no longer hidden during transform.
The same can be observed for rotation gizmos.
However, as a workaround for these rotation gizmos, there was already a
drawing utility running.
With the gizmo and the utility this drawing is now being done twice.
So remove the utility/workaround and update the gizmo accordingly.
[0] {648350e456490f8d6258e7de9bf94d3a6a34dbb2}
Differential Revision: https://developer.blender.org/D9542
- Use a context manager to handle file handlers (closing both in the
case of compressed files).
- Seek past BHead data instead of continually reading
(checking for 'REND').
- Write errors to the stderr (so callers can differentiate it from the
stdout).
- Use `surrogateescape` in the unlikely event of encoding errors
so the result is always a string (possible with files pre 2.4x).
- Remove '.blend' extension check as it excludes `.blend1` files
(we can assume the caller is passing in blend files).
- Define `__all__` to make it clear only one function is intended
to be used.
A new experimentatl STL importer, written in C++. Roughly 7-9x faster than the
Python based one.
Reviewed By: Aras Pranckevicius, Hans Goudey.
Differential Revision: https://developer.blender.org/D14941
A field input node for the scale of each top-level instance transform.
The scale can be set with the "Scale Instances" node, but previously
could not be retrieved.
Differential Revision: https://developer.blender.org/D15132
A field input node for the rotation of each top-level instance transform.
The rotation can be set with the "Rotate Instances" node, but previously
could not be retrieved.
Differential Revision: https://developer.blender.org/D15131
The original assert did not take into account the offset size in the loop being -1. The tests were then run in non-debug mode, so while the mesh regressions still passed, the false positive asserts that happened were not caught.
Differential Revision: https://developer.blender.org/D15136
The original assert did not take into account the offset size in the loop being -1. The tests were then run in non-debug mode, so while the mesh regressions still passed, the false positive asserts that happened were not caught.
Differential Revision: https://developer.blender.org/D15136
The transformation snapping code contains a bunch of `#define`s, some ambiguously or incorrectly named attributes. This patch contains refactored code to improve this. This patch does (should) not change functionality of snapping.
Clarified ambiguously / incorrectly named attributes.
- "Target" is used to refer to the part of the source that is to be snapped (Active, Median, Center, Closest), but several other areas of Blender use the term "target" to refer to the thing being snapped to and "source" to refer to the thing getting snapped. Moreover, the implications of the previous terms do not match the descriptions. For example: `SCE_SNAP_TARGET_CENTER` does not snap the grabbed geometry to the center of the target, but instead "Snap transforamtion center onto target".
- "Select" refers to the condition for an object to be a possible target for snapping.
- `SCE_SNAP_MODE_FACE` is renamed to `SCE_SNAP_MODE_FACE_RAYCAST` to better describe its affect and to make way for other face snapping methods (ex: nearest).
Refactored related `#define` into `enum`s. In particular, constants relating to...
- `ToolSettings.snap_flag` are now in `enum eSnapFlag`
- `ToolSettings.snap_mode` are now in `enum eSnapMode`
- `ToolSettings.snap_source` (was `snap_target`) are now in `enum eSnapSourceSelect`
- `ToolSettings.snap_flag` (`SCE_SNAP_NO_SELF`) and `TransSnap.target_select` are now in `enum eSnapTargetSelect`
As the terms became more consistent and the constants were packed together into meaningful enumerations, some of the attribute names seemed ambiguous. For example, it is unclear whether `SnapObjectParams.snap_select` referred to the target or the source. This patch also adds a small amount of clarity.
This patch also swaps out generic types (ex: `char`, `short`, `ushort`) and unclear hard coded numbers (ex: `0`) used with snap-related enumerations with the actual `enum`s and values.
Note: I did leave myself some comments to follow-up with further refactoring. Specifically, using "target" and "source" consistently will mean the Python API will need to change (ex: `ToolSettings.snap_target` is not `ToolSettings.snap_source`). If the API is going to change, it would be good to make sure that the used terms are descriptive enough. For example, `bpy.ops.transform.translate` uses a `snap` argument to determine if snapping should be enabled while transforming. Perhaps `use_snap` might be an improvement that's more consistent with other conventions.
This patch is (mostly) a subset of D14591, as suggested by @mano-wii.
Task T69342 proposes to separate the `Absolute Grid Snap` option out from `Increment` snapping method into its own method. Also, there might be reason to create additional snapping methods or options. (Indeed, D14591 heads in this direction). This patch can work along with these suggestions, as this patch is trying to clarify the snapping code and to prompt more work in this area.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D15037
Scaling handles while dragging could be distracting, especially at
extreme values where handles could become large on-screen.
Now all gizmos are shown while scaling.
GIZMO_GT_arrow_3d now now support changing their length while being
dragged as well as negative lengths.
The separate geometry and delete geometry nodes often invert the
selection so that deleting elements from a geometry can be implemented
as copying the opposite selection of elements. This should make the two
nodes faster in some cases, since the generic versions of selection
creation functions (i.e. from d3a1e9cbb9) are used instead
of the single threaded code that was used for this node.
The change also makes the deletion/separation code easier to
understand because it doesn't have to pass around the inversion.
When interacting with translate/rotate/scale gizmo, show the gizmo while
it's in use. There are some exceptions to this, as showing all scale
gizmos while scaling causes the gizmos to become large & distracting so
in this case only the gizmo being dragged is shown.
Resolves T63743.
Some operators OR'ed the existing flags in a way that made it seem
the value might already have some values set.
Replace this with assignment as no flags are set and the convention
with almost all operators is to write the value directly.
This implements the new way to attach curves to a mesh surface using
a uv map (based on the recent discussion in T95776).
The curves data block now not only stores a reference to the surface object
but also a name of a uv map on that object. Having a uv map is optional
for most operations, but it will be required later for animation (when the
curves are supposed to be deformed based on deformation of the surface).
The "Empty Hair" operator in the Add menu sets the uv map name automatically
if possible. It's possible to start working without a uv map and to attach the
curves to a uv map later on. It's also possible to reattach the curves to a new
uv map using the "Curves > Snap to Nearest Surface" operator in curves sculpt
mode.
Note, the implementation to do the reverse lookup from uv to a position on the
surface is trivial and inefficient now. A more efficient data structure will be
implemented separately soon.
Differential Revision: https://developer.blender.org/D15125
After this commit, all mesh data extraction and drawing code is in C++,
including headers, making it possible to use improved types for future
performance improvements and simplifications.
The only non-trivial changes are in `draw_cache_impl_mesh.cc`,
where use of certain features and macros in C necessitated larger
changes.
Differential Revision: https://developer.blender.org/D15088
This implements transform modes for the transform tool and Elastic
Transform. This mode uses the Kelvinlets from elastic deform to apply
the transformation to the mesh, using the cursor radius to control the
elasticity falloff.
{F9269771}
In order for this to work, the transform tool uses incremental mode when
elastic transform is enabled. This allows to integrate the displacement of
the Kelvinet in multiple steps.
Review By: Sergey Sharbin & Daniel Bystedt & Julian Kaspar & Campbell
Barton
Differential Revision: https://developer.blender.org/D9653
Ref D15041
Shifted flag for buttons changed was incorrectly compared with
unshifted packet flag to determine button press state.
Also fix button tracking storage; button flags are 32 bits whereas the
member variable was 8.
Differential Revision: https://developer.blender.org/D14915
The code that checked whether vertex normals needed to be recalculated
was checking the dirty tag for face normals and vertex normals, in an
attempt at increased safety. However, those tags are always set
together anyway. Only checking the vertex dirty tag allows potentially
allocating or updating the normals on the two domains independently,
which could allow further skipping of calculations in some cases.
Rendering directly to a resource using OpenGL interop and Hgi
doesn't work in Houdini, since it never uses the resulting resource
(it does not call `HdRenderBuffer::GetResource`). But since doing
that simultaneously disables mapping (`HdRenderBuffer::Map` is
not implemented then), nothing was displayed. To fix this, keep
track of whether a Hydra viewport does support displaying a Hgi
resource directly, by checking whether
`HdRenderBuffer::GetResource` is ever called and only enable use
of OpenGL interop if that is the case.
Differential Revision: https://developer.blender.org/D15090
The fix is to unify with the name we had for the old Curves objects.
That means that we will see them bothi (old and new curves) in the outliner
(under two different categories but with different names).
This is considered to be a temporary solution until we remove the old
curve system entirely.
This was leading to some crashes and warnings such as:
"Code marked as unreachable has been executed. Please report this as a bug."
Differential Revision: https://developer.blender.org/D15116
Code handling repetitive boolean operations when using several objects
from a Collection would not handle result mesh properly, re-creating for
each object without properly freeing it.
Further more, existing code was effectively converting the BMesh to mesh
twice, including a modification of the initial (input) mesh, which
modifiers should never do!
Removed the extra useless conversion, which also gives a small
improvement in performances:
With as simple of a scene as four objects (three operands in a
collection, and the modified one) totalling 20k vertices/faces, this
commit:
* Avoids 2MB memory leak per evaluation (!).
* Speeds up boolean evaluation by 5-10%.
Found while investigating some production files of the Project Heist
here at the Blender Studio.
In the latest discussions about curves/hair mesh attachement
information (T95776), it was decided to use UV coordinates to
store where on the mesh each root is. For that, we have to specify
which of the UV map attributes to use for UV lookups.
This property isn't used yet, but it will be shortly when refactoring
the attachement information in the add brush and the to particle
system conversion.
Differential Revision: https://developer.blender.org/D15115
Instead of directly accessing constraint-specific callbacks
in code all over blender, introduce two wrappers to retrieve
and free the target list.
This incidentally revealed a place within the Collada exporter
in BCAnimationSampler.cpp that didn't clean up after retrieving
the targets, resulting in a small memory leak. Fixing this should
be the only functional change in this commit.
This was split off from D9732.
Differential Revision: https://developer.blender.org/D13844
The packed image loader was not aware of the fact that UDIM tiles
can be of a different size.
Exposed Python API required to access this information. It has the
same complexity as the "regular" packed files: in both cases the
ImBuf will be acquired and released to access the information.
While the current workflow of packing UDIMs is not very streamlined,
it is still possible and is something what the studio is using here.
Test file:
{F13130516}
Expected behavior achieved with this patch: a bigger checker board
pattern in viewport render
Actual behavior prior to this patch: either memory corruption, or
wrong/black render result on the plane
Differential Revision: https://developer.blender.org/D15111
This did not refresh the Image editor, but more importantly this now
appeared cropped (a regression from the partial image updater).
Solved in the RNA function by:
- calling BKE_image_partial_update_mark_full_update
- sending appropriate notifier
Maniphest Tasks: T98573
Differential Revision: https://developer.blender.org/D15110
These changes make the curves sculpt mode keymap consistent
with other modes. They now show up in the keymap, for potential
editing of tool shortcuts, etc. I don't fully understand this system,
but at least these changes should make it consistent.
Differential Revision: https://developer.blender.org/D15112
Acceleration structures in the viewport default to building with the fast
build flag, but the intersection program used for curves was queried with
the fast trace flag. The resulting mismatch caused an exception in the
intersection kernel. Since it's difficult to predict whether dynamic or static
acceleration structures are going to be built at the time of kernel loading,
this fixes the mismatch by always using the fast trace flag for curves.
Show the supported geometry types returned by geometry
node socket declarations in the socket inspection tooltip.
Differential Revision: https://developer.blender.org/D14802
In the editmode sidebar, pasting a particular vertex's weight in a
single group was not behaving the same as copying for all groups [in
that the former dis not copy to unassigned vertices whereas the later
did copy to unassigned vertices].
This behaves like this since the introduction in {rB70fd2320c8d2}, but
there does not seem to be a good reason for this?
Now make this consistent and use `BKE_defvert_copy_index` in both cases
(instead of earlying out if unassigned, this will make sure this will
also copy to unassigned).
Maniphest Tasks: T98459
Differential Revision: https://developer.blender.org/D15062
Main motivation is from T54314 where there was no way to read from a
Viewer image datablock after the compositor has run.
The only solution there was to do a full rerender (which obviously takes
much longer). Adding a handler avoids having to rerender.
This uses new syntax from rBf4456a4d3c97 and also adds "COMPOSITE" as a
job type that can be queried by `bpy.app.is_job_running`.
NOTE: there is another issue when multiple viewers are used and these
get active via RNA (compo execution is not triggered there yet -- unlike
when a viewer is selected in the Editor -- this is an issue of
`ED_node_set_active` vs. only `nodeSetActive`, but this will be tackled
separately)
Maniphest Tasks: T54314
Differential Revision: https://developer.blender.org/D15078
Regression in [0]. When zoomed in, we can be within the face of an
island but too far from an edge, in this case
uv_find_nearest_face_multi_ex is used instead of
uv_find_nearest_edge_multi with the consequence that hit.l cannot be
used in uvedit_uv_select_test (it is NULL).
Instead, use uvedit_face_select_test instead in this case.
[0]: d356edf420
Reviewed By: campbellbarton
Ref D15100
Also fix formating of `curves_attribute_element_id` which was copy pasted.
# Conflicts:
# source/blender/draw/engines/eevee_next/shaders/eevee_attributes_lib.glsl
"Fix" should be taken with a grain of salt, this will fix
the issue on win10 1903 and newer.
OpenVDB uses boosts memory mapped files which call
CreateFileA in the back-end when you feed it a
regular string.
now the encoding for CreateFileA will be whatever the
default is for the system, it internally turns it into
a wide string with said encoding and calls CreateFileW.
This change changes that encoding to UTF-8 for just
blender so we can use utf-8 with any of the narrow
api functions. This is a manifest change and only win10
1903 will look for it, so that sadly limits the fix
to only a subset of users.
While ideally we would have fixed the issue our selves,
some of the calls to openvdb::io::file::open are beyond
our control (ie from inside USD or Mantaflow)
Note: This only changes the behaviour in regard to Win32
API functions, regular CRT functions like fopen or if_stream will
still not accept utf-8 filenames.
Differential Revision: https://developer.blender.org/D14981
Reviewed by: brecht
A typical use case is when you want to render with the Filmic view transform, but
composite an existing image in the background that should not be affected by the
view transform.
With this colorspace it's possible to do an inverse Filmic transform, render
everything in scene linear space, and then apply the Filmic transform again.
This is pretty basic in that this is not going to take into account the full view
transform including looks, curves and exposure. But it can be helpful anyway.
Ref T68926
For non-raw, non-sRGB color spaces, always use half float even if that uses
more memory. Otherwise the precision loss from conversion to scene linear or
sRGB (as natively understood by the texture sampling) can be too much.
This also required a change to do alpha association ourselves instead of OIIO,
because in OIIO alpha multiplication happens before conversion to half float
and that gives too much precision loss.
Ref T68926
The original index layer was not initialized properly.
Supporting original indices properly for this node is
doable, but for now it is better to simply initialize them
to the "none" value to fix the crash.
Differential Revision: https://developer.blender.org/D15105
The problem was that copying a `CDDerivedMesh` (`CDDM_copy`) doesn't
copy the `vert_normals` reference that it takes from a mesh. Since this
entire area is almost completely broken anyway (mainly in terms of
ownership handling), for now we can just avoid copying the `DerivedMesh`
in the zero levels case.
Longer term, this area should be refactored to remove `DerivedMesh`
and use the newer subdivision evaluation system.
Differential Revision: https://developer.blender.org/D15099
This patch enables operator presets for USD exports.
The export menu has many options, so enabling the feature
will help users manage their export settings in the same
way they can with other filetypes.
Same as {rB1d668b635632}
Differential Revision: https://developer.blender.org/D14896
Using multithread for `add_triangles` to speed up quad tree building.
Each thread would lock its respective tile to work on triangle insertion,
intersection calculation, tile splitting and triangle array extension.
Reviewed By: Sebastian Parborg (zeddb), Sergey Sharybin (sergey)
Ref D14953
Move into its own new function the the low-level logic to search for a
given RNA path in Action F-curves, then driver F-curves of a given AnimData.
This deduplicates code from `BKE_fcurve_find_by_rna_context_ui` and
`id_data_find_fcurve`, and will allow for future more usages of this
functionality.
Differential Revision: https://developer.blender.org/D15068
It can be assumed that all scripts comply with basic pep8 formatting
regarding white-space, indentation etc.
Also remove note in best practices page & update `tests/python/pep8.py`.
If we want to exclude some scripts from make format,
this can be done by adding them to `ignore_files` in:
source/tools/utils_maintenance/autopep8_format_paths.py
Or using `# nopep8` for to ignore for individual lines.
Ref T98554
Add `bpy.app.is_job_running(job_type)` as high-level indicator. Job
types currently exposed are `WM_JOB_TYPE_RENDER`,
`WM_JOB_TYPE_RENDER_PREVIEW`, and `WM_JOB_TYPE_OBJECT_BAKE`, as strings
with the `WM_JOB_TYPE_` prefix removed. The functions can be polled by
Python code to determine whether such background work is still ongoing
or not.
Furthermore, new app handles are added for
`object_bake_{pre,complete,canceled}`, which are called respectively
before an object baking job starts, completes sucessfully, and stops due
to a cancellation.
Motivation: There are various cases where Python can trigger the
execution of a background job, without getting notification that that
background job is done. As a result, it's hard to do things like
cleanups, or auto-quitting Blender after the work is done.
The approach in this commit can easily be extended with other job types,
when the need arises. The rendering of asset previews is one that's
likely to be added sooner than later, as there have already been
requests about this.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D14587
- Set the highlight language to python3 (excludes python2 syntax).
- Set the encoding for code highlighting to utf-8 (no need to detect).
- Update deprecated variable name.
- Remove redundant unicode prefixed string.
This patch makes it possible to manipulate strips without need to use
update functions to recalculate effect and meta strips.
Prior to this change function `SEQ_time_update_sequence` had to be used
to update mainly effects and meta strips. This was implemented in a way
that relied on sorted list of strips, which can't always be done and in
rare cases this approach failed.
In case of meta strips, `seqbase` had to be passed and compared with
"active" one to determine whether meta strip should be updated or not.
This is especially weak system that is prone to bugs when functions are
used by python API functions.
Finally, other strip types had startdisp` and `enddisp` fields updated
by this function and a lot of code relied on these fields even if strip
start, length and offsets are available. This is completely
unnecessary.
Implemented changes:
All effects and meta strips are updated when strip handles are moved or
strip is translated, without need to call any update function.
Function `SEQ_time_update_sequence` has been split to
`SEQ_time_update_meta_strip_range` and
`seq_time_update_effects_strip_range`. These functions should be only
used within sequencer module code. Meta update is used for versioning,
which is only reason for it not being declared internally.
Sequence fields `startdisp` and `enddisp` are now only used for
effects to store strip start and end points. These fields should be
used only internally within sequencer module code.
Use function `SEQ_time_*_handle_frame_get` to get strip start and end
points.
To update effects and meta strips with reasonable performance, cache
for "parent" meta strip and attached effects is added to
`SequenceLookup` cache, so it shares invalidation mechanisms.
All caches are populated during single iteration.
There should be no functional changes.
Differential Revision: https://developer.blender.org/D14990
Adding a scroll-bar to in-line lists has the down-side that it cuts
of text including warnings or notes that can be included, see: T87008.
Now enums are referenced [0] this is no longer needed, reverting [1].
[0]: 1c6b66c9cf
[1]: 1e8f266591
To make it consistent with collections, now it's possible to name the new layer created using the `Move to Layer` option.
Differential Revision: https://developer.blender.org/D15092
Crash happened because code could not find a valid base in current scene
after adding the object, added some checks for that.
Root of the issue was wrong assumptions in `BKE_object_add` logic, which
would pick the first valid ancestor collection in case initially
selected collection was not editable. In some case, this could pick a
collection not instanced in the current scene's view layer, leading to
not getting a valid base for the newly added object.
Addressed this by adding a new variant of `BKE_collection_object_add`,
`BKE_collection_viewlayer_object_add`, which ensures final collection is
in given viewlayer.
Code was using the loop [which is looping over the selection] index as
an index for the lookup into the edges directly, but needs to be a
lookupinto the IndexMask.
Also renamed the variable (as used elsewhere) to make this more clear.
If accepted, would be nice to still get this into 3.2.
Maniphest Tasks: T98536
Differential Revision: https://developer.blender.org/D15089
The tweak tool was toggling node selection twice, as the selection
key-map is already accounted for in the node key-map there is no need
to duplicate the actions in the tweak tool.
Use `DEG_OBJECT_ITER_BEGIN`for loading objects, this iterator is
technially unsafe to use *during* depsgraph evaluation,
see https://developer.blender.org/D14997 for detailed explainations.
Although reusing the same patch coordinate for all corner pointing the
same vertex works for interpolation vertices, it does work for
interpolation face varying attributes. So we need to keep the original
patch coordinates around for face varying interpolation. This was caused
by the previous fix (a5dcae0c64).
The existing BUTTONS_OT_file_browse operator that's used for
uiTemplateImage layouts fails to work correctly with UDIM textures.
This is mainly due to it not realizing that it must tokenize the
filepath before signaling that an update has been made. It also doesn't
work correctly when executing its SHIFT-click behavior to open the image
in an external application. Lastly, it doesn't set the filters to Images
and Movies which is suboptimal for the user.
The new operator takes the unique features of BUTTONS_OT_file_browse
and creates a customized variant better suited for images.
Differential Revision: https://developer.blender.org/D14824
Also cleaned up the code a tad bit. Note that I
found two more bugs:
* GPU subdivision attribute interpolation
is producing visual artifacts.
* "Show on cage" mode for subdivision surface
just shows black colors.
Sculpt undo now detects if an attribute layer has
changed type/domain and unconverts it back. This
is a temporary workaround to a more fundamental
bug in the undo system.
Memfile undo assumes it can always rebuild the
application state from the prior undo step,
which isn't true with incremental undo systems.
The correct fix is to push an extra undo step prior
to running an operator if an incremental undo system
is active and the operator is using memfile undo.
Removed OPTYPE_UNDO flags from the swap brush colors and
sample color operators. These types of operators are
not supposed to be undoable in the first place. Also
memfile undo is too buggy for it.
The issue was that the extend socket (the last empty socket in
Input/Output nodes) was repeatedly removed and added again,
which caused more updates than necessary. Now, the extend
socket is kept if it existed already.
Differential Revision: https://developer.blender.org/D15084
My benchmark which spend most time preparing function parameters
takes `250 ms` now, from `510 ms` before. This is mainly achieved by
doing less unnecessary work and by giving the compiler more inlined
code to optimize.
* Reserve correct vector sizes and use unchecked `append` function.
* Construct `GVArray` parameters directly in the vector, instead of
moving/copying them in the vector afterwards.
* Inline some constructors, because that allows the compiler understand
what is happening, resulting in less code.
This probably has negilible impact on the user experience currently,
because there are other bottlenecks.
Differential Revision: https://developer.blender.org/D15009
This commit adds a float selection to curve control points or curves,
a sculpt tool to paint the selection, and uses the selection influence
in the existing sculpt brushes.
The selection is the inverse of the "mask" from mesh sculpt mode
currently. That change is described in more detail here: T97903
Since some sculpt tools are really "per curve" tools, they use the
average point selection of all of their points. The delete brush
considers a curve selected if any of its points have a non-zero
selection.
There is a new option to choose the selection domain, which affects how
painting the selection works. You can also turn the selection off by
clicking on the active domain.
Sculpt brushes can be faster when the selection is small, because
finding selected curves or points is generally faster than the
existing brush intersection and distance checks.
The main limitation currently is that we can't see the selection in the
viewport by default. For now, to see the selection one has to add a
simple material to the curves object as shown in the differential
revision. And one has to switch to Material Preview in the 3d view.
Differential Revision: https://developer.blender.org/D14934
This is an extension of 4669178fc3, applying the same changes to
attributes chosen in the field inputs of the geometry nodes modifier.
If a UI/internal attribute is used, the attribute name button will
have a red alert. Adding a disabled hint is currently a bit more complex.
Also hide UI attributes in attribute search for the named attribute node.
Part of D14934
These functions don't change their inputs, so they can be const,
which is a bit more intuitive and clean to use for callers.
Differential Revision: https://developer.blender.org/D14943
Move MNEE to own kernel, separate from shader ray-tracing. This does introduce
the limitation that a shader can't use both MNEE and AO/bevel, but that seems
like the better trade-off for now.
We can experiment with bigger kernel organization changes later.
Differential Revision: https://developer.blender.org/D15070
Previously, the base math headers included GMP headers in all cases.
This was problematic because we don't want all modules that use the
math headers to depend on GMP, and the unnecessary includes could
theoretically have detrimental effects to compile times.
Now `BLI_math_mpq.hh` depends on `BLI_math_base.hh`, so if a file
needs to use exact arithmatic, it can just include the former.
Differential Revision: https://developer.blender.org/D15079
Issues stems from the mesh not being watertight. This was caused by
floating point precision issues when evaluating patch coordinates at
patch boundaries (loops/corners in different patches pointing to the same
vertex). To fix this we ensure that all loops pointing to the same vertex
share the same patch coordinate. This keeps code simple, and does not
require to track precision issues in floating point math all over the
place.
This commit hides "UI attributes" described in T97452 from the UI lists
in mesh, curve, and point cloud properties, and disallow accessing them
in geometry nodes.
Internal UI attributes like selection and hiding values should use the
attribute system for simplicity and performance, but we don't want to
expose those attributes in the attribute panel, which is meant for
regular user interaction. Procedural access may be misleading or cause
problems, as described in the design task above.
These attributes are added by two upcoming patches: D14934, D14685
Differential Revision: https://developer.blender.org/D15069
See previous commit for an explanation of what went wrong. Similar to
the fix there, we also have to update the dragged data (e.g. the
data-block) referenced by the button.
Committing separately since this could cause further issues.
In Blender buttons are recreated over redraws, except of the active
button which is kept alive, and replaces the new version of itself in
the new redraw. In order to do that, the button needs to be recognized.
This process of recognizing and matching buttons from different redraws
isn't always bullet-proof. That's okay-ish, but we have to make sure
that the relevant data of the old active button is updated with the
newest data.
Here the matching would go wrong, and the new active button was
recognized as the old active button, which was in fact removed when the
asset was cleared. This patch makes sure the image buffer attached to
the buttons is updated when buttons were recognized as matching.
Note that the dragging will still use the wrong data-block, this will be
fixed in the following commit.
When multiple objects are in edit mode, UVs for the objects, except for
the first one (in rendering order) appear corrupted. The corruption is
because the UVs are not evaluated as the compute shader is not bound,
thus we read unitialized memory.
We keep track of the currently bound shader in the GPU context in order
to avoid unnecessary shader switches in case the same shader is used in
consecutive calls. However, the shader used by the OpenSubdiv evaluator
is not part of Blender and therefore not tracked via the GPU context.
When extracting UVs for multiple objects, we only ever run a single
shader (FVar evaluation). However, between the compute calls, we also
call the OpenSubdiv stencil evaluation shader, which uses `glUseProgram`
modifying the current program, outside of our control, which then also
unbinds the Blender compute shader making the compute dispatch fail ("No
active compute shader").
The fact that extracting the UVs for the first rendered object works is
because another (Blender) shader was bound in the GPU context prior to
our binding of our evaluation shader.
To fix this, we remember, in the OpenSubdiv evaluator, the current
program so that it can be reset after the stencil program is done.
Differential Revision: https://developer.blender.org/D15064
When building blender as a python module, such as for inclusion in a
wheel, it is not permitted to link against python libraries.
This diff does so by simply unsetting the library when building blender
as a python module, instead of the more heavyweight solution of
switching to the cmake FindPython module.
Reviewed By: LazyDodo, campbellbarton
Ref D15012
The operator assumed it was called on a mesh object, which has
mostly been the case because of lack of support for other object
types, but the new curves object is supported, which is the situation
in the report.
Differential Revision: https://developer.blender.org/D15063
The new OBJ importer operator didn't register an undo event.
This commit enables the register and undo flags for the operator.
Reviewed By: Bastien Montagne, Aras Pranckevicius, Serhiy Striletksy
Differential Revision: https://developer.blender.org/D15051
Some of the tools in sculpt mode were still referring to the previously experimental sculpt vertex colors.
They should instead refer to color attributes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D15073
Add the following macros for enums as support for these features wasn't
all that obvious and there were some inconsistencies in their use.
- RNA_ENUM_ITEM_HEADING(name, description)
- RNA_ENUM_ITEM_SEPR
- RNA_ENUM_ITEM_SEPR_COLUMN
Avoid in-lining large enums such as icons and event types, linking
to them instead.
This mitigates T76453, where long enums took a lot of space in the docs,
this was a problem with `UILayout` where each icon argument would list
all icons. [0] worked around the issue using CSS to scroll the list.
However this has the draw-back where some items are clipped in a way
that's not obvious, see: T87008.
The reason this isn't a complete solution is that Python defined enums
aren't written into their own pages which can be linked to, although
currently there are no large Python enums included in the API docs.
All in-lined enums are now under 20 items.
[0]: 1e8f266591
Create a page for every enum in RNA_enum_items.h, which includes
the enum values and the doc-string for each item.
Each page creates a references which the API reference can be linked to
via the same name as the enum, so :ref:`rna_enum_icon_items` links
to the list of icons for e.g.
This has two main advantages:
- No need to manually duplicate enum values in the doc-strings of
functions defined in Python's C/API (not RNA defined functions),
`bpy.props` for example.
- The generated Python API docs can reference these instead of including
the enums in-line - resulting in unreasonably long lists in the case
if icons and event types (for example).
These changes will be made separately.
This commits corrects the calculation of the Frame Node label size,
making it independent of the 'Line Width' user preference.
Since `U.dpi` is actually DPI divided by `U.pixelsize` and `U.pixelsize`
is calculated from line-width multiplying by `U.pixelsize` undoes
the connection between line-width and label size.
It now stays the same, regardless of the line-width setting.
Reviewed By: Julian Eisel, Harley Acheson
Differential Revision: https://developer.blender.org/D14338
This commits corrects the calculation of the Frame Node label size,
making it independent of the 'Line Width' user preference.
Since `U.dpi` is actually DPI divided by `U.pixelsize` and `U.pixelsize`
is calculated from line-width multiplying by `U.pixelsize` undoes
the connection between line-width and label size.
It now stays the same, regardless of the line-width setting.
Reviewed By: Julian Eisel, Harley Acheson
Differential Revision: https://developer.blender.org/D14338
Add support for adding (inserting) new background images into an
override of a linked Camera ID.
Request from the Blender studio.
This ended up being more involved than expected as it uncovered some
latent issues with existing background images code. Noticiably, a new
`BKE_camera_background_image_copy` had to be added to handle copying
of background images in a proper, generic ID-management way.
The number of attribute domains is not an attribute domain.
This way it doesn't have to be handled in switch statements.
Differential Revision: https://developer.blender.org/D15065
Assuming that an ID pointer is NULL because another 'source type'
property has some specific value is utterly wrong and a gateway to
usercounting bugs.
These lines were not used now because the handling of copy data has changed.
Assigning the `eval` data can produce unexpected result, especially since everywhere ID_RECALC_TRANSFORM is used, we also do a copy on write. That should take care of `ob->data` for the eval object.
The problem was because the check was done with the total weights of the first element of the array and if this was null or 0, the weights were not duplicated.
As this bug was introduced fixing T97150 due a problem in the weight data, now instead to duplicate all stroke data to create the perimeter for the PDF/SVG, only the points are duplicated because the weights are not needed. This fix the original bug and also reduce the memory used by the export process.
This is a follow up to rBbb0fc675822f313c5546a2498a162472c2571ecb.
Now the same kind of run-time data is added to nodes and sockets.
Differential Revision: https://developer.blender.org/D15060
When launching Blender with a script creating a screenshot, the Outliner
tree wasn't initialized and built properly. That is because at this
stage, all visible regions were only tagged for a non-rebuild redraw,
not a full redraw. So ensure all regions are tagged for a full redraw
immediately after file reading. Usually the full redraw would be caused
by a file-read notifier, but the Python expression/script is executed
before notifiers are handled.
Note that even before this was crashing, the Outliner would be empty in
the created screenshot.
Additionally adds an assert to the Outliner to note assumptions
explicitly, rather than crashing later.
Subdivision did not properly update when evaluating first without and then with
orco coordinates. Now update the subdivision evaluator settings every time, and
reallocate the vertex data buffer when needed.
there is an additional issue in this file where orco coordinates are not
available immediately on the first frame when they should be, and only appear
on the second frame. However that is an old limitation related to the depsgraph
not getting re-evaluated on viewport display mode changes, here we just fix the
crash.
`bNodeTree` has a lot of run-time embedded in it currently. Having a separately
allocated run-time struct has some benefits:
* Run-time data is not stored in files.
* Makes it easy to use c++ types as run-time data.
* More clear distinction between what data only exists at run-time and which doesn't.
This commit doesn't move all run-time data to the new struct yet, only the data where
I know for sure how it is used. The remaining data can be moved separately.
Differential Revision: https://developer.blender.org/D15033
From reading the code it looks like at some point the code was expecting
the `tptr` PointerRNA to change during the loop? But currently it did
not make any sense to have this complex looping and multi-checking of
RNA path and animdata, since the RNA pointer (and therefore its
`owner_id`) is never modified...
NOTE: there could be much more cleanup done in that area, goal of this
commit is mainly to simplify the logic by removing all the (seamingly)
dead code.
Differential Revision: https://developer.blender.org/D15026
I'm not sure what is causing this. Vertex normals get corrupted
for paint and mask sculpt brushes but not the normal geometric
ones. Since we don't actually need to recalculate normals
here to begin with I've just disabled it. The code now
calls the appropriate node mark update function based on
the sculpt tool.
Previously, when there were multiple curve points at the same or
almost the same position, the computed tangent was unpredictable.
Now, the handling of this case is more explicit, making it more
predictable. In general, when there are duplicate points, it will just use
tangents from neighboring points now.
Also fixes T98209.
Differential Revision: https://developer.blender.org/D15016
Since 2d80f814cc, curves always have evaluated points,
but single point curves do no have any evaluated segments, and the
leading zero length isn't stored in the curves length cache.
Previously the function had a fair amount of ugly boilerplate to avoid
allocating the temporary layers array, and then free it if necessary.
`blender::Vector` solves that problem more elegantly. Passing a span,
using references in a few cases, and using a switch statement also make
the functions simpler.
This refactoring is in preparation for D14583 and D14685.
Differential Revision: https://developer.blender.org/D15011
When the 'compare' is not used for the resulting selection, just hide
it. This is the case for 'Vertex Groups' atm (where only membership is
taken into account).
Similar to rB9dc9692b0979.
Differential Revision: https://developer.blender.org/D14979
This could happen when switching between custom action sets that both
had controller pose actions. Problem was that controller data is
cleared when changing action sets, and this clearing was done when
handling WM events, which always occurs after XR controller data is
updated from GHOST.
Now, instead of activating the action set immediately, delay activation
until just before the next XR actions sync.
Since [0], using the view navigation gizmo crashed with Wayland.
This only worked previously because GHOST_kGrabWrap was ignored.
Now the previous grab state is disabled before switching to a new
grab state.
[0]: da9e14b0b9
The original fix for T97366 was too restrictive and breaks real-world
cases of single-file UDIM textures. See D13297 for an example.
This patch effectively reverts the original fix and instead fixes the
downstream code to accept single-file ranges as necessary.
Note: This means it is very important for users to make use of the
"UDIM detection" option during `image.open` or drag n' drop scenarios in
order to declare their intent when loading their files.
Differential Revision: https://developer.blender.org/D14853
After recent changes to Nishita sky to clamp negative colors, the pixels ended
up a bit brighter which lead to them exceeding the half float max value. The
CUDA float to half function seems to need clamping.
After removing the default 'Home' shortcut for "Frame All", a NDOF (3D
Mouse) default shortcut was still available for the operator. The event
filtering introduced in 4357fb63db was missing the NDOF filtering
logic. So while the context menu correctly found the NDOF keymap item,
its actual shortcut change/removal code incorrectly filtered out the
NDOF keymap items and thus failed to find the item.
This is a regression caused by a230445cae.
The internal cause of the issue was that the synchronization component
was no longer tagged as visible (and hence not evaluated) as it not
connected to any directly visible IDs.
Changed the logic in a way that if any component of an ID is evaluated
the synchronization component will be evaluated as well.
The naming of the flag in the component node is a bit confusing, but
for the simplicity of the change for the upcoming release left it
unchanged.
Fix T97500 by removing the logic that for some unknown reason draws the
entire string if the min/max were swapped.
This function is only called in two places, once here in the NLA, and
the VSE. The bug only materializes in the NLA though.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D14742
Fix T97974 by having the marker rendering code explicitly set the
required line width.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D14890
full scaled image isn't used anymore. It was added to use a different scale when
displaying an image in the image editor. This was replaced by the image engine
redesign.
This change will reduce complexity of {T98375}.
`BKE_id_delete` should only check for consistency of user count with
regards to the tags and flags of the ID, not 'protect' nor even warn in
case a 'fake user' ID is deleted (such higher-level checks are to be
handled by higher-level code).
Also replace the assert + debug print by a CLOG error, this avoids
'assert crash' while still failing tests, and always producing a useful
message.
Fixes T98374 and T98260.
Dragging number buttons wasn't grabbing the cursor and would stop
when the pointer reached the screen edge & wasn't setting the cursor
visible on completion.
The day is currently specified as 90000 seconds which is 25 hours.
Obviously this is wrong, and this commit changes it to 86400s/24 hours.
Differential Revision: https://developer.blender.org/D15034
Mostly using built-in `__atomic` functions, with a special code path
using `MemoryBarrier()`on windows.
Authored By: Sergey Sharybin (sergey)
Reviewed By: Sergey Sharybin (sergey), Ray molenkamp (LazyDodo)
Ref D15020
Callbacks used in the gizmo operator template don't support updating
while being dragged, set the EXCLUDE_MODAL flag so the offsets
aren't accumulated. Also fix the offset being applied twice to the
move gizmo.
When expanding the data path for the context, use Context.temp_override
to extract context members. Without this, only context-members available
in the preferences were used which misses members which are likely to
be useful.
Iterate over all windows, areas and regions showing unique member as
candidates. The search is limited to WINDOW/PREVIEW region types, the
preferences space type is also excluded. See the doc-string for
rna_path_prop_search_for_context for additional notes on this.
Currently strings are used for cases where a list of identifiers would
be useful to show.
Add support for string properties to reference a callback to populate
candidates to show when editing a string. The user isn't prevented from
typing in text not found in this list, it's just useful as a reference.
Support for expanding the following strings has been added:
- Operator, menu & panel identifiers in the keymap editor.
- WM operators that reference data-paths expand using the
Python-consoles auto-complete functionality.
- Names of keying sets for insert/delete keyframe operators.
Details:
- `bpy.props.StringProperty` takes an option `search` callback.
- A new string callback has been added, set via
`RNA_def_property_string_search_func` or
`RNA_def_property_string_search_func_runtime`.
- Addresses usability issue highlighted by T89560,
where setting keying set identifiers as strings isn't practical.
- Showing additional right-aligned text in the search results is
supported but disabled by default as the text is too cramped in most
string search popups where the feature would make sense. It could be
enabled as part of other layout tweaks.
Reviewed By: brecht
Ref D14986
(Not meant to cause user visible changes.)
Makes use of the new iterators introduced in the previous commit. Some
benefits:
- Shorter, simpler, easier to read & understand
- Deduplicates logic
- Centralizes iteration logic, making it easier to replace tree storage
(as planned), see previous commit.
- Avoids having to pass (sub-)tree to iterate around (often redundant
since it's just `SpaceOutliner.tree`, even though `SpaceOutliner` is
already passed).
- Function arguments that are only passed to the recursive call are
recognized as unused (found and removed a few).
Also does some general cleanups while refactoring the code for the
iterators. Use `const`, use references (signals null is not expected),
early-exit (see 16fd5fa656), remove redundant arguments, etc.
(Not meant to cause user visible changes.)
Adds some first new iterators to traverse over tree elements with a
functional syntax. Functional because it meant to be used with C++
lambdas.
For example, this common pattern:
```lang=cpp
void some_recursive_function(SpaceOutliner *space_outliner, ListBase *tree, ...)
{
LISTBASE_FOREACH (TreeElement *, te, tree) {
/* ... do something with the element ... */
/* Recurse into open children. */
if (TSELEM_OPEN(TREESTORE(te), space_outliner) {
some_recursive_function(&te->subtree, ...);
}
}
}
```
Gets simplified to this:
```lang=cpp
void some_function(SpaceOutliner &space_outliner, ...)
{
tree_iterator::all_open(space_outliner, [&](TreeElement *te) {
/* ... do something with the element ... */
});
}
```
We can add more iterators, e.g. some that support early exiting or
skipping children, returning a custom type, only act on selected
elements, etc.
The following commit will convert a bunch of code to use these. Some
further benefits will become visible there. Not all cases are straight
forward to convert, but hopefully more and more code can be refactored
to work with this. This deduplicates and centralizes the iteration
logic, which will later make it much easier to refactor how the tree
storage is done (e.g. move it to `SpaceOutliner_Runtime` and use a
better container than `ListBase`).
Design is to have warnings in the sub-tree of a collapsed element show
up next to the collapsed element. But if inside the collapsed element,
there was a uncollapsed one containing yet another element with a
warning, that warning wouldn't "bubble up" to the collapsed parent.
Issue was that the warning lookup would only recurse into collapsed
elements, rather than all elements inside of a collapsed element.
While the actual fix for this could've been simpler, I decided to rework
this code entirely. Recursively querying the warning message is now done
separately from drawing the message once found, which makes the code
easier to follow and implements the single responsibility principle
better.
Library overrides were basically using their own system to display
warnings for tree elements, even though for other display elements we
have a more general solution. With the previous commit this has been
generalized further and made trivial to extend.
Uses a inheritance based approach for querying warning of tree elements
and the mode column support of display modes.
For the warnings, tree elements can override the
`AbstractTreeElement::getWarning()` method and return a warning string.
The UI will draw the warning column with warning icons. This makes the
warning column more generalized and easier to extend to more use-cases.
E.g. library override elements will use this after a followup commit.
To support mode toggles a display mode can now just return true in the
`AbstractTreeDisplay::supportsModeColumn()` method. This makes it
trivial to add mode columns to other display modes, and less error prone
because there's no need to hunt down a bunch of display mode checks in
different places.
The wm_gesture_tag_redraw function was only called on mouse move, so the
flip state preview was not updating just by pressing the F key.
Reviewed By: Severin
Maniphest Tasks: T83519
Differential Revision: https://developer.blender.org/D9779
Even though the `no_unique_address` attribute has only been standardized
in C++20, compilers seem to support it with C++17 already. This attribute
allows reducing the memory footprint of structs which have empty types as
data members (usually that is an allocator or inline buffer in Blender).
Previously, one had to use the empty base optimization to achieve the same
effect, which requires a lot of boilerplate code.
The types that benefit from this the most are `Vector` and `Array`, which
usually become 8 bytes smaller. All types which use these core data structures
get smaller as well of course.
Differential Revision: https://developer.blender.org/D14993
There should be no visible change. The difference is mostly on how we
changed the rounding to handle the conversion from color space to the
new linear space of the attribute colors.
To convert the materials in icon_geom.blend I used:
```
import bpy
from mathutils import Color
def convert_material(material):
if not material.use_nodes:
return
if not material.node_tree:
return
node_tree = material.node_tree
for node in node_tree.nodes:
if node.type != 'RGB':
continue
color_original = node.outputs[0].default_value
color_new = Color(color_original[:3]).from_srgb_to_scene_linear()
color = (*color_new, color_original[3])
node.outputs[0].default_value = color
def main():
for material in bpy.data.materials:
convert_material(material)
main()
```
This allows for the new tool icons to use geometry nodes.
In order to do this I also had to use the new API for accessing the
attributes (instead of vertex colors). Which in turn requires a few
changes to use linear color space.
I went ahead and updated the entire code to use the linear space
everywhere. I will update the icon files manually to make sure the final
result is similar to what we have now.
Note: We now use round instead of int. That plus the changes regarding the
color space will lead to some icons to change slightly (no perceived
visual change).
Differential Revision: https://developer.blender.org/D14988
`RNA_path_struct_property_py` cannot get const `ptr` parameter for now
(usage of `RNA_struct_find_property`).
Also make `RNA_path_resolve_` functions take a const PointerRNA
parameter.
A global variable was mistakenly used here which would accumulate the
vertex attributes (leading to an assertion failure after a while), use
the wrong number of components depending on the attribute data type,
among other issues.
Faces, edges, and vertices are still shown when GPU subdivision is
actived. This is because the related edit mode flags were ignored by the
subdivision code.
The flags are now passed to the various compute shaders mostly as part of
the extra coarse data, also used for e.g. selection. For loose edges, a
temporary buffer is created when extracting them. Loose vertices are
already taken into account as it reuses the routines for coarse mesh
extraction, although `MeshRenderData.use_hide` was not initialized,
which is fixed now.
This results in a speedup if the capture attribute is only needed
under specific circumstances (e.g. when a switch further down the
line is true). Previously, the input field was always evaluated.
Differential Revision: https://developer.blender.org/D15018
In case of line art "occlusion only" or contour not enabled, it's possible for an object
to not produce any feature lines.
This patch checks that to prevent freeing a NULL pointer.
This icon was using a material with a slightly different shade of
purple. I removed all the duplicated materials in icons_geom.blend
and this was the only "functional" change (though it is not noticeable).
This commit makes PointerRNA passed to RNA path API const.
Main change was in the `path` callback for RNA structs, and indirectly
the `getlength` callback of properties.
When appending an already linked data, `BKE_blendfile_append` would not
properly substitute the `item->new_id` pointer of link/append context
items with the local duplicate of the linked ID.
This would cause drag'n'drop of assets to work incorrectly in some
cases. Fixes part of T95706 and T97320.
Regression in [0] which removed the call to BVH-tree recalculation
before calculating the selection.
Instead of recalculating the BVH-tree, postpone recalculating mesh data
until after the selection has been calculated.
[0]: 6e77afe6ec
Added in [0] but isn't needed as all needed variables are in the
ViewContext. Avoid passing in the context is it makes debugging
issues with MESH_OT_knife_project more difficult to investigate since
it's possible values written to the ViewContext are ignored.
[0]: 6e77afe6ec
When no image user is known the last used frame of the image is used to
read a frame. When partial updating an image there is always an image user
that would use a zerod out image user, meaning the frame number is set to 0
when using the clone tool.
This fix syncs the frame with the last used frame of the image to ensure
that the buffer exists. There is a bailout in the overlay_edit_uv.c.
RenderEngine.render is both a method and an attribute,
while this should be avoided it's not causing a problem in practice
so quiet the warning when generating docs.
Sphinx now builds docs without any warnings.
Inclining built-in shader descriptions used the wrong indentation level.
Link to the built-in shaders instead which avoids the indentation error
and de-duplicates the list which is already shown on the page.
Dropping would pass the name of the ID to drop to the properties of the
drop operator. This would then lookup the ID by name. With linking
and/or library overrides, multiple IDs of the same name and type may
exist, which is why the session UUID should be used instead. All
operators used for dropping support this now and the drop code passes
the session UUID instead of the name.
Also see 917c096be6 and 8f79fa9c67.
Some drop operators were already using the session UUIDs. This converts
the remaining ones. The "name" property is kept working as before, since
some scripts use this.
Side-effect: The "Name" property won't show up in the Adjust Last
Operation anymore, which was the case for some of these operators, and
its value won't be remembered over multiple executions of the operator.
Both were not at all useful from what I can tell, and I doubt this was
done intentionally.
There are now some generalized helpers for passing IDs from drag & drop
to operators via operator properties, mostly introduced in 917c096be6
and 8f79fa9c67. These can be used in a bunch of places to reduce
duplicated code and explicitly share a common solution.
Side-effect: The "Name" property won't show up in the Adjust Last
Operation anymore, and its value won't be remembered over multiple
executions of the operator. Both were not at all useful from what I can
tell, and I doubt this was done intentionally.
Continuation of 8f79fa9c67 and 917c096be6. The ID's session UUID is
now always priotitized over its name to lookup the ID from drop-box or
operator properties. bc3dbf109c shows what happens if the name happens
to be set for whatever reason and the session UUID isn't prioritized.
8f79fa9c67 was an attempt to fix this already, but it didn't quite
work. Problem was that the tooltip was messing with the drop-box and
operator properties, setting the name property for its own internal
logic. This name property would then be used rather than the session
UUID to query the material, which gave the wrong material (linking can
result in multiple IDs of the same type with the same name). A followup
commit will further sanitize this.
More and more of the drop operations are being switched to use the ID's
session UUID rather than the name, but the cleanup after a drop operator
was cancelled assumed they would set the name. They will now first
attempt to use the session UUID and fallback to the name if needed.
Add notifier such that the Motion Paths panel in the Object Properties tab
gets redrawn, after using the Create Motion Path button.
The reason it didn't update was that the button actually triggers a popup,
and then executes in the context of that popup. It now actually emits a
`ND_DRAW_ANIMVIZ` notifier, and ensures that the panel redraws on that.
The goal is to make it easier to track down sources of errors during
the dependency graph builder.
With this change whenever a relation can not be added a trace to the
entity which requested the relation will be printed. For example:
```
Failed to add relation "Copy Location"
Could not find op_from: OperationKey(type: BONE, component name: 'MissingBone', operation code: BONE_DONE)
Trace:
Depth Type Name
----- ---- ----
1 Object Armature.001
2 Pose Channel Bone
3 Constraint Copy Location
```
On an implementation detail traced places where `checkIsBuiltAndTag`
is called, with some additional places to help tracking pose channels,
constraints, and modifiers.
Further improvements in granularity are possible, but that could happen
as a followup development once the core part is proven to work.
An example of such improvement would be to have entries in the trace
which will indicate NLA and drivers building. Currently it might be
a bit confusing to see IDs in the trace referenced from driver.
Even with such limitation the current state of the patch brings a
very valuable information (some information is much better than no
information at all).
Differential Revision: https://developer.blender.org/D15017
It is a know issue that split normals aren't supported when using high
quality normals in the viewport. Some AMD platforms were pushed to use
high quality normals to work around a driver bug where 1010102 texture
formats `GL_INT_2_10_10_10_REV` wasn't uploaded to the GPU.
This change will remove commonly used polaris platforms from the
work-around. This has been tested with a RX480 against the latest AMD
whql drivers (22.5.1). Users need to ensure that they use the latest
drivers that are available on their platform.
Although this change doesn't fix the underlying issue to support edit
normals when high quality normals are enabled. It will not force that
common platforms cannot use a feature as their platform is forced into
using a work-around.
This adds support to render Curves attributes in EEVEE.
Each attribute is stored in a texture derived from a VBO. As the
shading group needs the textures to be valid upon creation, the
attributes are created and setup during its very creation, instead
of doing it lazily via create_requested which we cannot rely on
anyway as contrary to the mesh batch, we do cannot really tell if
attributes need to be updated or else via some `DRW_batch_requested`.
Since point attributes need refinement, and since attributes are all
cast to vec4/float4 to account for differences in type conversions
between Blender and OpenGL, the refinement shader for points is
used as is. The point attributes are stored for each subdivision level
in CurvesEvalFinalCache. Each subdivision level also keeps track of the
attributes already in use so they are properly updated when needed.
Some basic garbage collection was added similar to what is done
for meshes: if the attributes used over time have been different
from the currently used attributes for too long, then the buffers
are freed, ensuring that stale attributesare removed.
This adds `CurvesInfos` to the shader creation info, which stores
the scope in which the attributes are defined. Scopes are stored
as booleans, in an array indexed by attribute loading order which
is also the order in which the attributes were added to the material.
A mapping is necessary between the indices used for the scoping, and
the ones used in the Curves cache, as this may contain stale
attributes which have not been garbage collected yet.
Common utilities with the mesh code for handling requested
attributes were moved to a separate file.
Differential Revision: https://developer.blender.org/D14916
Since rBb47c5505aa37, Batchs containing GPUIndexBuf initialized via
a PyObject with buffer protocol no longer work.
This was because of an unsafe optimization in the GPUIndexBuf module
for Python.
So remove this micro-optimization.
When saving from the menu the region was not set,
causing the last region in `area->regionbase` to be used
as the region was assigned before comparison.
* Port over new code tables from Cycles
* Convert Rec.709 to scene linear for lookup table.
* Move code for wavelength and blackbody to IMB so they can access the
required transforms, which are not in blenlib.
* Remove clamping from blackbody shader to bypass the texture read.
Since it's variable now easiest to just always read from the texture
than pass additional parameters.
* Fold XYZ to RGB conversion into the wavelength table.
Ref T68926
Regenerate blackbody RGB curve fit to not clamp values, and extend down to
800K since it does now change below 965K.
Note that as before, blackbody is only defined in the range 800K to 12000K
and has a fixed value outside of that. But within that range there should
be no more unnecessary gamut clamping.
This reverts commit 14a5a91e0e.
This caused build errors on x64+arm mac builds and some versions
of MSVC, reverting for now till a better solution is found.
917c096be6 applied to objects only, this also applies the same fix for
the general 3D View drop operations, e.g. used for dragging materials,
images, worlds, etc.
This is needed to fix T95706, but apparently something else is still
going on. Needs further investigation.
The operators to handle object drag and drop (from the asset browser,
outliner, etc.) used the object name to find the object to add and
place. This is problematic with linking and/or library overrides, since
this may lead to multiple objects with the same name. So the wrong
object would be used by the drop operators.
Partially fixes T97320. T95706 probably needs the same fix but for
materials.
As a side-effect, the "Name" button won't show up in the Adjust Last
Operation panel anymore. This isn't really useful, and I doubt this was
ever intentionally exposed in the UI.
If the asset is stored in the current file, display the corresponding
icon in the "Source" button in the sidebar. This is a nice indicator and
helps users learn what this icon represents (it's used in the main
region without text too).
The operators to handle object drag and drop (from the asset browser,
outliner, etc.) used the object name to find the object to add and
place. This is problematic with linking and/or library overrides, since
this may lead to multiple objects with the same name. So the wrong
object would be used by the drop operators.
Partially fixes T97320. T95706 probably needs the same fix but for
materials.
As a side-effect, the "Name" button won't show up in the Adjust Last
Operation panel anymore. This isn't really useful, and I doubt this was
ever intentionally exposed in the UI.
The importer was not doing a notification that the scene has changed, so
the bottom status bar scene stats info was not updated right after the
new OBJ import.
Reviewed By: Julian Eisel
Differential Revision: https://developer.blender.org/D15015
This patch makes it possible to change the precision with which to
store volume data in the NanoVDB data structure (as float, half, or
using variable bit quantization) via the previously unused precision
field in the volume data block.
It makes it possible to further reduce memory usage during
rendering, at a slight cost to the visual detail of a volume.
Differential Revision: https://developer.blender.org/D10023
Using the atomic "compare and swap" method in add_triangles stage
dramatically speeds up the add_triangles call and significantly reduced
the overall calculation time. This is currently the fastest method we
have experimented with so far.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D14953
Steps to reproduce were:
- Open Clip Editor
- Call "Open Clip" (e.g. Alt+O)
- Select video file
The file wouldn't be loaded into the Clip Editor.
Caused by 7849b56c3c.
This is part of a fix for T88570, where the file selector would crash
when activated multiple times.
Calling save multiple times would free the operator, leaving a dangling
pointer which was used when panels were visible that accessed the
"active_operator".
Reviewed By: Severin
Ref D14905
Existing code to replace the file operation was failing when done from
the window for the file operation itself.
Basically, this patch does two things:
- Implement a well defined window context to use as the "owner" or
"root" of the File Browser. This will be used for managing the File
Browser and to execute the file operation, even after the File Browser
was closed.
- Ensure the context is valid when dealing with file File Browser event
handlers.
Previously the window context just wasn't well defined and just happened
to work well enough in most cases. Addressing this may unveil further
issues, see T88570#1355740.
Differential Revision: https://developer.blender.org/D13441
Reviewed by: Campbell Barton
This should decrease cognitive load because:
- Intention is more explicit
- Shorter visual scope of branches (no need to search for matching
closing brackets and `else` blocks)
- Visually less busy code because condition-checks and code that
"actually does things" are separated, with less indentation
- Avoids chaining together a bunch of conditions to a single `if`
Also: Use `const`, correct comment placement, whitespace improvements.
`BKE_nlastrip_find_active()` and `update_active_strip()` now do a more
thorough search for the active strip, by also recursing into
meta-strips.
There were some assumptions in the NLA code that the active strips is
contained in the active track. This assumption turned out to be false:
when there is a meta-strip, the active strip could be inside that, and
then it's not contained in `active_track.strips` directly.
Apart from the above, there are other situations in which the track
pointed to by `AnimData::act_track` does *not* contain the active strip
(even indirectly).
Both these cases can happen when the transform system is moving a strip
that's in tweak mode. Entering tweak mode doesn't just search for the
active track/strip, but also falls back to the last-selected ones. This
means that the track/strip pointers & flags can be out of sync with
what's being tweaked/transformed. Because of this, the assumption that
there is any relation between "active strip" and "active track" has been
removed from the `update_active_strip()` function.
All this searching could be prevented by passing the `AnimData` to the
code that duplicates tracks & strips. That way, when the active
track/strip is dup'ed, the `AnimData` pointers can be updated as well.
That would require more refactoring and thus could introduce other bugs,
so that's left for later.
This patch adds 4th option to Time offset modifier Modes.
It loops from start frame to end frame and then back to start in reverse direction.
In other words it is a combination of Normal and Reverse mode.
Especially with offset control it adds the ability to create easy looping animations such as cheering crowds, flowers opening and closing at different offsets.
Reviewed By: #grease_pencil, antoniov, pepeland, mendio
Differential Revision: https://developer.blender.org/D14965
Found those missing casts while looking into a crash report made in
the Blender Chat. Was unable to reproduce the crash, but the casts
should totally be there to avoid integer overflow.
* Rename ambiguous rgb to scene_linear in some places
* Precompute matrices to directly go to scene instead of through XYZ
* Make function signatures more consistent
Between scene linear and sRGB, XYZ, linear Rec.709 and ACES2065-1.
And add some clarifications about color spaces in the docs.
Fixes T98267
Ref T68926
Differential Revision: https://developer.blender.org/D14989
There are two issues. The biggest one was that a pixel value was used
to compare a squared distance meaning the tolerance was too strict.
The other issue was that the tolerance in pixels was different to what
the tracking mode is using.
The user-level change is that now it should be easier to tweak the
mask shape.
This is a place where the API function and operator should differ, for the API
manually setting the filepath and then saving should work. For the UI there is
no filepath visible, so it should open Save As even if there was a filepath set
for example from before changing an image type to Generated.
Some RNA property update callbacks can already generate such modifier,
and only one is allowed per object, so had to adapt code actually adding
new modifiers in liboverride apply codebase.
Also fixed an unreported issue of incorrect interpolation of thickness.
Reviewed By: Aleš Jelovčan (frogstomp), Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D15005
Some RNA property update callbacks can already generate such modifier,
and only one is allowed per object, so had to adapt code actually adding
new modifiers in liboverride apply codebase.
Also fixed an unreported issue of incorrect interpolation of thickness.
Reviewed By: Aleš Jelovčan (frogstomp), Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D15005
The 3D brush utility and the delete brush only considered segments,
so they did not handle single points. Fix by adding special cases for
single point curves.
Differential Revision: https://developer.blender.org/D14944
For the "Sphere" 3D brushes, the depth and radius are only sampled at
the beginning of the stroke. This didn't work when tablet pressure is
used as a factor for the brush radius. Now the 3D brush depth is found
with the max radius (as if the pressure was 1.0), but the pressure
factor is used afterwards.
Restructuring the way the brush executors stored the radius made
the change a bit clearer, which is where most of the diff comes from.
Differential Revision: https://developer.blender.org/D15002
This uses the recently introduced evaluator's vertex
data to smoothly interpolate original coordinates instead
of using linear interpolation.
The orcos are interpolated at the same time as positions
and as such, the specific subdivision routine for the
orco extractor has been removed. The patch evaluation
shader uses a definition to enable code specific to
orco evaluation.
Since the orco layer may not have been requested on first
render, and since orco data is now stored in the OpenSubDiv
evaluator, the evaluator needs to be recreated if an
orco layer is suddenly available. For this, a callback
to check if the evaluator has the data was added. This is
added to the evaluator as the `Subdiv` cache stored in the
modifier is invalidated less often than the Mesh batch cache
and so leads to fewer evaluator recreations.
Differential Revision: https://developer.blender.org/D14999
Previously we would pass button state and draw information to widget
draw callbacks in a rather hacky way. Some specific flags from
`uiBut.flag` were masked out, so their bits could be reused for also
passing `uiBut.drawflag` in the same int. Instead this commit introduces
a state-info struct that can properly hold all the relevant data.
This has the advantage that it's now easier to introduce new state data
that needs to be accessible in the widget callbacks. Since we are
running out of button flags, we plan to reorganize button flags, and
split them up into multiple bitfields. In the widget drawing code, this
would have been a hassle earlier.
Also had to add a new widget callback to draw blocks as widgets (popup
backgrounds), since that would pass block flags where we would usually
pass button flags. This wasn't nice, now it's separated more clearly.
This patch changes the Text Box Width socket to always have that label
instead of switching to "Max Width" when Overflow mode is picked.
Bug report: T97060
Differential Revision: https://developer.blender.org/D14909
This flag was used to activate the hotkey input buttons (e.g. for
"Assign Shortcut") when opened in a popup. Since this was added, other
more generalized ways of getting this same behavior were implemented.
Had to tweak the hotkey button event handling a bit, but it seems to
behave exactly as before now.
Currently the delete brush and some other brushes use the line
segment from the current brush position to the previous position
to find curves to interact with. However, this doesn't work well
with more advanced stroke settings that purposefully use
non-contiguous brush sample locations. This commit makes
the delete brush only use the current sample location.
Differential Revision: https://developer.blender.org/D14992
Multiply the radius and strength of sculpt brushes by the pressure
when "use pressure" is turned on. The brush system isn't responsible
for this, so the pressure needs to be stored in `StrokeExtension`.
Differential Revision: https://developer.blender.org/D14996
Avoids having to manually enable data-blocks for user-edition when you
do not care about what should be edited by whom. Similar to default
behavior before introduction of system overrides (aka non-user-editable
overrides).
The final normalization step of sculpt normal calculation iterates over
all unique vertices in each node and marks them as done. However,
storing the done mask in a bitmap meant that multiple threads could
write to a single byte at the same time, because the bits for separate
threads could be stored in the same byte. This is not threadsafe
Fixing this issue seems to improve performance as well. First I tested
just clearing the entire bitmap after the normal calculation. Then I
tested using an array of booleans instead, which turned out to be
slightly better, and simplifies code a bit.
I tested on a Ryzen 3800x, on an 8 million polygon subdivided
Suzanne by using the grab brush with a radius large enough to
affect most of the mesh.
| Original | Clear Entire Bitmap | Boolean Array |
| --------- | ------------------- | ------------- |
| 67.9 ms | 59.1 ms | 57.9 ms |
| 1.0x | 1.15x | 1.17x |
Differential Revision: https://developer.blender.org/D14985
When labels in popups (typically headings) matched the name of a button,
the label would be activated instead of the button.
This caused the unwrap menu in the UV editor not to re-select "Unwrap"
when opening a second time.
- In some cases it avoids using strlen on the result.
- Use ATTR_NONNULL for all arguments.
- Remove NULL pointer check for WM_operator_bl_idname src argument.
- Rename from/to to src/dst.
When AUDASPACE couldn't find NUMPY, it would disable WITH_PYTHON for
the rest of Blender. Now setting the value globally is only done for
standalone AUDASPACE builds. Now it's possible to build Blender with
AUDASPACE & PYTHON but without NUMPY.
While this isn't an especially important configuration to support,
having Python mysteriously disabled is a hassle to troubleshoot.
NOTE: extern/audaspace/CMakeLists.txt has become out sync with the
original [0], it seems this is being maintained in our repository.
[0]: https://github.com/neXyon/audaspace/blob/master/CMakeLists.txt
The name 'console' for a module was too generic, move into a sub-package
of bl_console_utils, so other console utilities can be added
without creating new top-level modules.
Specialized thumbnailing function to create previews of all EXR image
files, regardless of type, size, or dimensions. Uses less RAM by only
loading a single row of pixels at a time.
See D14663 for more details and examples.
Differential Revision: https://developer.blender.org/D14663
Reviewed by Brecht Van Lommel
Display information about sound media in "Source" category in side panel
similar to movie resolution and framerate.
The specs are stored in the `Sequence` struct, and are extracted at
the moment of struct creation. If the "source file" is changed,
the specs change also.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D14565
The algorithm is not designed to be used with Closed strokes (cyclic) and actually the result is arbitrary. In order to avoid this, now the closed strokes never are merged.
Related to T98235
Feedback by: @mendio
The change was kind of intentional on {rB21e72496a629}.
That commit made mouse movement to "select" the contraint in Auto
Constraint a requirement.
This deduplicated the code a bit, but this requirement is not
comfortable for the first "selection" of the contraint.
So the constraint "selection" is now done in two ways:
- If there is no contraint, the "selection" is done immediately;
- If there is already a constraint, the "selection" is delayed by 1 event to simulate a constraint cancellation if there is no mouse movement.
Existing code for the `Move` operator, and some `Collections` panel
operations (Object properties) was absolutely not override-safe, and
sometimes not even linked-data safe.
That max number of `10000` level of recursivity was a typo (should have
been `1000`), but even that is way too high, typical sane situation
should not lead to more than a few tens of levels, so reducing the max
level to 200.
Also improve error message with more context info about the issue.
Found while investigating issues for the Blender Studio's Heist production.
That max number of `10000` level of recursivity was a typo (should have
been `1000`), but even that is way too high, typical sane situation
should not lead to more than a few tens of levels, so reducing the max
level to 200.
Also improve error message with more context info about the issue.
Found while investigating issues for the Blender Studio's Heist production.
In some cases (when there is an evaluated curve), the conversion code
would try to free the evaluated data-block twice, because freeing the
object would free it from `data_eval` and then the data-block was freed
again explicitly. Now check if the data-block is stored in `data_eval`
before freeing `object.data` manually. This is another area that's made
more complex by the fact that we change the meaning of `object.data`
for evaluated objects. The solution is more complicated than it should
be, but it works whether or not an evaluated mesh or curve exists.
Was an old known annoying issue, since the matching RNA property is
read-only we need a manual handling of this in override applying and
resyncing code.
It wasn't possible to temporarily orbit the view, then set back to an
axis-aligned view.
Details:
- It was possible to change RegionView3D.view_rotation while the view
kept the axis alignment value (Top, Left, Front .. etc) which
displayed in the viewport overlay.
Now changing the view rotation directly or via "view_matrix" resets
the axis-alignment - clearing when the view is no longer axis-aligned
or assigning the newly aligned axis.
- RegionView3D.is_orthographic_side_view added in [0] could be assigned
but wasn't useful as it treated an enum as a boolean only setting the
RegionView3D.view to RV3D_VIEW_USER or RV3D_VIEW_FRONT.
Now enabling this aligns the viewport rotation to it's closest
axis-aligned orientation setting RegionView3D.view & view_axis_roll
accordingly. Note that the "orthographic" term is misleading as the
property only relates to axis-alignment, not to the
perspective/orthographic setting. We could consider deprecating the
current naming.
[0]: 63bae864f4
View roll checked if the resulting roll was close to a view axis
but didn't write the aligned quaternion back to the final result.
Add ED_view3d_quat_to_axis_view_and_reset_quat since most callers
to ED_view3d_quat_to_axis_view will reset the quaternion when a view
aligned axis is found.
Asserting the variables weren't NULL raised a warning with GCC 12.1,
instead of suppressing the warning, always assign NULL which is often
expected behavior and makes the function work as documented.
There's currently 4 places that need to be edited when adding
a DNA header, and as you can imagine, this has gotten out of
sync quite a bit.
source/blender/CMakeLists.txt - 84 headers
source/blender/makesdna/intern/CMakeLists.txt - 33 headers
source/blender/makesdna/intern/makesdna.c@includefiles - 77 headers
source/blender/makesdna/intern/makesdna.c@Disabletypes - 76 headers
This diff makes source/blender/CMakeLists.txt the only place
where we need to keep track of dna headers, less maintenance
less mistakes. For all old places there is now a comment reminding
people of the new location.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D13048
This module allow tracking of object and geometry data accross time.
This commit adds no user visible changes.
It work in both viewport (*) and render mode, gives correct motion
for any camera projection type and is compatible with displacement (**).
It is a huge improvement upon the old EEVEE velocity which was only used
for motion blur and only available in render.
It is also an improvement for speed as the animated objects do not need to
be rendered a 3rd time. The code is also much cleaner: no GPUVertBuf
duplication, no GPUBatch amendment, no special cases for different geometry
types, no DRWShadingGroup per object, no double buffering of velocity.
The module is still work in progress as the final output may still be
flawed.
(*): Viewport support is already working but there might be some cases where
mapping will fail. For instance if topology changes but not vertex count.
(**): Displacement does not contribute to motion vectors. Surfaces using
displacement will have the same motion vectors as if they were not displaced.
This allows using the Graphic API to copy buffer data.
The GPU module do not expose untyped buffers even if that's what most API
do, so the copy function need to be strongly typed.
Contains GL backend implementation.
To clarify term still frame: This is portion of strip that displays
static image. This area can exist before or after strip movie content.
Still frames were implemented as strip property, but this was never
displayed in panel. Only way to set still frames was to drag strip
handle with mouse or using python API. This would set either
`seq->*still` or `seq->*ofs` where * stands for `start` or `end`.
When strip had offset, it can't have still frames and vice versa, but
this had to be enforced in RNA functions and everywhere in code where
these fields are set directly. Strip can not have negative offset or
negative number of still frames.
This is not very practical approach and still frames can be simply
implemented as applying negative offset. Merging these offsets would
simplify offset calculations for example in D14962 and could make it
easier to also deprecate usage `seq->*disp` and necessity to call
update functions to recalculate strip boundaries.
For users only functional change is ability to set negative strip offset
using property in side panel.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D14976
Issue revealed by rB90e12e823ff0. Hidden objects may not be fully
evaluated by the despgraph, do not attempt to restore edit/sculpt/etc.
modes for those.
Should also be backported to 2.93 LTS release.
Sometimes integers are mixed using float weights. In those cases
the mixed result has to be converted from into float again.
Previously, this was done using a simple cast, which was unexpected
because e.g. 14.999 would be cast to 14 instead of 15.
Now, the values are rounded properly.
This can affect existing files unfortunately without a good option
for versioning. Gladly, very few files seem to depend on the details
of the old behavior.
Differential Revision: https://developer.blender.org/D14892
This makes changes to the opensubdiv module to support additional vertex data
besides the vertex position, that is smootly interpolated the same way. This is
different than varying data which is interpolated linearly.
Fixes T96596: wrong generated texture coordinates with GPU subdivision. In that
bug lazy subdivision would not interpolate orcos.
Later on, this implementation can also be used to remove the modifier stack
mechanism where modifiers are evaluated a second time for orcos, which is messy
and inefficient. But that's a more risky change, this is just the part to fix
the bug in 3.2.
Differential Revision: https://developer.blender.org/D14973
Previously, the depsgraph assumed that every node tree might contain
a reference to a video. This resulted noticeable overhead when there
was no video.
Checking whether a node tree contained a video was relatively expensive
to do in the depsgraph. It is cheaper now due to the structure of the new
node tree updater.
This also adds an additional run-time field to `bNodeTree` (there are
quite a few already). We should move those to a separate run-time
struct, but not as part of a bug fix.
Differential Revision: https://developer.blender.org/D14957
If making liboverride of an empty collection, this (root of override
hierarchy) collection would get untagged in code when checking for
collections that do not need to be overridden, leading to not overriding
this root collection, and later in code to using NULL pointer.
It turns out there's no practical use for separating different edge types
before final occlusion stage, also using an array should be faster overall.
So changed those lists into one pending array, it also made the
iteration and occlusion task scheduling simpler.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D14951
After changing the duplicated edge removal method in D14903,
these two obindex variables are no longer needed.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D14949
The old method doesn't check e for array boundary.
The new method ensures it only access valid elements.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D14903
This change allows the chaining function to select edges
from the same contour loop first, thus reduced rouge chain
connections (connected different objects instead of chaining
inside the same object first) and improved chaining quality.
This patch also included the default value change for chain
split threshold (Now don't split by default to make initial
result as smooth as possible)
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D14950
Accessing context members depended on `ctypes` to access symbols
which were hidden for macOS & WIN32.
Add an API call that doesn't require the symbols to be exported.
This allows most symbols to be hidden on Linux, see D14971.
Regression caused by [0] which changed node selection to use
PRESS for selection and CLICK_DRAG to transform the selection.
This conflicted with Alt-LMB which would select the node then
pass-though to node.background_sample, preventing the drag event
from being activated.
Resolve by only activating background-sample when the cursor
isn't over a node or socket.
[0]: 4c3e91e5f5
Issue was caused by treating such strip as meta and using
`seq->channels` directly, which is not valid for scene strips.
Pointer to channels is now provided by function
`SEQ_get_seqbase_from_sequence`.
Ensure the correct total/diffuse/transmission depth is set when evaluating
shaders for MNEE, consistent with regular light shader evaluation.
Differential Revision: https://developer.blender.org/D14902
We need to ensure `Main.filepath` is consistent with the current path
where we are saving the .blend file, otherwise some path processing code
can produce invalid results (happens with e.g. the code syncing the two
path storages in Library IDs).
The problem is that depsgraph evaluation happens before the OpenGL context
is initialized, and so modifier evaluation happens without GPU subdivision.
Later the BKE_subsurf_modifier_can_do_gpu_subdiv test in the draw code gives
a different result.
This just checks if the mesh has information for GPU subdivision in the draw
code, and if so uses it. This is only set if the test for supported GPU
subdivision passes in the modifier evaluation.
Additionally it may be good to perform OpenGL context initialization earlier
so background render can take advantage of GPU subdivision, but this is more
complicated.
Differential Revision: https://developer.blender.org/D14969
This reverts commit 30534deced.
After discussion and feedback from users, it's better to keep this tool
available until there is time to properly re-think the whole Outliner's
contextual menu.
Properly use CLOG to report info or errors in `writefile.c`, instead of
printf's.
And remove some assert when logging error reports and the issue is not
critical.
If we produce CLOG_ERROR messages and the error is not actually
critical, there is no point in asserting too.
Mainly related to ID user counts, and a few other ID management areas.
This patch fixes long standing issue of reverse mode only performing loop 2 times and then stops displaying.
Differential revision: https://developer.blender.org/D14921
This makes it much clearer what data is supposed to be modified
and what data is just used to influence the operation. The new
`BKE_paint_brush_for_read` function isn't great design, but it
can be removed or renamed if similar changes are applied to
more places.
Also pass pointers explicitly to `sample_curves_3d_brush` rather
than reusing the `bContext`. This makes it clearer what data the
function actually needs.
Differential Revision: https://developer.blender.org/D14967
A regression since 113b8030ce: circle selection operators does not
define properties like deselect_all and a special name callback is to
be used for those.
This is what was already done for circle select in the 3D viewport.
Some other spaces were using the generic pick operator for the circle
selection which causes error prints in the console.
Remove poll method from the `OBJECT_OT_instance_offset_from_cursor`
operator. It was checking for `context.active_object`, but not even doing
anything with the active object. It'll get in the way of exposing this
operator in another area of the interface, though.
Regression in tests from [0] tests were written to assume a newline was
added to the result of Text.as_string which is no longer the case.
[0]: f4ff36431c
Refactoring event click-drag detection broke click detection for
simulated events. Resolve this by sharing logic for update previous
values in `wmWindow.eventstate` for regular event handling
(no functional changes for non-simulated events). Failure to detect
clicks for simulated events broke the undo test
`test_undo.view3d_multi_mode_select` in `../lib/tests/ui_simulate/run.py`.
All undo tests now pass.
Moving Text.as_string() from Python to C [0] added an extra new-line
causing a round-trip from_string/to_string to add a new-line,
this also broke the undo test `test_undo.text_editor_simple` in
`../lib/tests/ui_simulate/run.py`.
[0]: 231eac160e
This removes the manual construction of a box mesh in the mesh sequence
cache modifier when the Alembic procedural is enabled. It also removes
the use of `BKE_object_boundbox_get` which doesn't make sense on a
non-evaluated object.
Differential Revision: https://developer.blender.org/D14958
When texture painting, brush textures and brush texture masks were not
transformed to account for UDIM tiles.
Differential Revision: https://developer.blender.org/D14671
When saving from the menu the region was not set,
causing the last region in `area->regionbase` to be used
as the region was assigned before comparison.
In this case memory past the buffer bounds would have been written,
potentially crashing. Replace the check with an assert since this
should never happen.
Also don't call exit as failing to write a file shouldn't exit Blender.
Actually, delete the strip only deletes the container, but not the linked data. This patch adds the option to delete the scene also. This is very handy for storyboarding.
Reviewed By: ISS
Maniphest Tasks: T97683
Differential Revision: https://developer.blender.org/D14794
This operator allows to add a new scene at the same time that the strip. This is very handy for storyboarding.
Reviewed By: ISS
Maniphest Tasks: T97678
Differential Revision: https://developer.blender.org/D14790
No longer happens on the buildbot, but for users building with an older
Xcode, still need to avoid using value().
Differential Revision: https://developer.blender.org/D14883
Fix a crash when a driver variable targets an object and uses
`data.shape_keys.key["name"].value` in its expression.
The fix consists of adding an extra relation from the targeted object's
`GEOMETRY` component to the driver evaluation. This ensures that its
`data` pointer has been evaluated by the depsgraph and is safe to
follow.
This also resolves the concern raised on rB56407432a6aa.
Reviewed by: brecht
Differential Revision: https://developer.blender.org/D14956
Skip writing binding data and similar for override modifiers already
present in reference linked data, as this can use a lot of space, and
is fully useless data typically since we already skip writing Mesh
geometry data itself.
Ref. T97967.
Skip writing binding data and similar for override modifiers already
present in reference linked data, as this can use a lot of space, and
is fully useless data typically since we already skip writing Mesh
geometry data itself.
Ref. T97967.
Skip writing binding data and similar for override modifiers already
present in reference linked data, as this can use a lot of space, and
is fully useless data typically since we already skip writing Mesh
geometry data itself.
Ref. T97967.
Skip writing binding data and similar for override modifiers already
present in reference linked data, as this can use a lot of space, and
is fully useless data typically since we already skip writing Mesh
geometry data itself.
Ref. T97967.
This changes is needed to give more control to modifiers' writing
callback when defined. It will allow to implement better culling of
needless data when writing e.g. modifiers from library overrides.
Ref. T97967.
Reviewed By: brecht, JacquesLucke
Differential Revision: https://developer.blender.org/D14939
The active/render layer is indexed from the first layer of that type. These functions
incorrectly subtracted the layer index of *each* layer, instead of the first one.
If there's only a single layer this doesn't matter, but when there are multiple layers
it will set the wrong active layer for consecutive layers.
I'm not aware of any actual errors caused by this, because the active and render layers are
only ever queried from the first layer of that type, but it was confusing during debugging a
related issue. This patch makes the behavior of CustomData_set_layer_active_index()
consistent with CustomData_set_layer_active() and the same for render.
Differential Revision: https://developer.blender.org/D14955
Blender can only support a single undo system per undo step. As sculpting/vertex colors are mutual exclusive operations
out approach is just to switch the undo system when painting on an image.
PBVHNodes contain a list of areas that needs to be pushed to the undo system.
Currently the undo code is in sculpt_paint_image. We should eventually support undo for color filtering and other nodes.
we might need to place it to its own compile unit so more brushes can invoke the same code.
{F13048942}
Reviewed By: brecht
Maniphest Tasks: T97479
Differential Revision: https://developer.blender.org/D14821
The 'OVERRIDE_HIDDEN' extra collection would often be mistakenly added
to a linked collection, which is totally forbidden and guaranteed to
crash on undo/redo.
Reworked the code instantiating that extra collection in a more generic
and hopefully robust way now.
Previously these only supported a subset of what the save operator could do,
for example no multilayer or stereo saving, no proper color management. Now
share code with the image save operator so it's more consistent.
Made tangent frame consistent across the surface regardless of the sample,
which was not the case with the previous algorithm. Previously, a tangent
frame would stay consistent for the same sample throughout the walk, but not
from sample to sample for the same triangle. This actually resulted in code
simplification.
Also includes additional fixes:
* Fixed an important bug that manifested itself with multiple lights in the
scene, where caustics had abnormally low amplitude: The final light pdf did
not include the light distribution pdf.
* Removed unnecessary orthonormal basis generation function, using cycles'
native one instead.
* Increased solver max iteration back to 64: It turns out we sometimes need
these extra iterations in cases where projection back to the surface takes
many steps. The effective solver iteration count, the most expensive part,
is actually much less than the raw iteration count.
Differential Revision: https://developer.blender.org/D14931
Inherited from older versions of the code, not needed anymore in most
common cases (like making override from a local empty instantiating a
collection, or if the active object is directly overridable).
Headers should only include other headers when absolutely necessary,
to avoid unnecessary dependencies and increasing compile times.
To make this change simpler, three DerivedMesh functions with a single
use were removed.
We really need to fix how unprojected radius (scene unit) works.
What happened is the paint code updates the brush's normal radius
with the current unprojected pixel radius, which was then
used by texture brush tiled mode.
To fix this I just cached the pixel radius at stroke start in
UnifiedPaintSettings->start_pixel_radius.
This fixes the smooth tolerance feature in master where sometimes you could
get over simplified chains and lose the shape it's supposed to be originally.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D14929
Knowing when layers are retrieved for write access will be essential
when adding proper copy-on-write support. This commit makes that
clearer by adding `const` where the retrieved data is not modified.
Ref T95842
This was due to using `BKE_scene_has_object` function, which uses the
cache of bases of the viewlayers, which do not have entries for the
content of excluded collections... Now use
`BKE_collection_has_object_recursive` instead.
This patch get rid of the _incorrectly used_ DG iterator in object loading,
and uses scene objects iteration to prevent problems.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D14907
Steps to reproduce were:
- Factory startup
- Right-click in 3D View
- Move the mouse over "Shade Flat", wait for the tooltip
The changed logic in 4680331749 to lookup an active button was
incorrect. It didn't respect the priority of active button candidates.
* Respect the image file color space setitng for saving in various cases where
it was previously ignored. Previously it would often use the sRGB or Linear
color space even when not selected.
* For the Save As operator, add a Color Space option in the file browser to
choose the color space of the file. Previously this was chosen automatically,
now it's possible to e.g. resave a Linear image as Linear ACES.
* When changing the file format, the colorspace is automatically changed to an
appropriate color space for the file format. This already happened before, but
there was no visibility or control in the operator settings for this.
* Don't change color space when using the Save operator to save over the same
file.
* Fix missing color space conversion for 16 bit PNGs, where it assumed wrongly
assumed ibuf->rect would be used for saving. Add BKE_image_format_is_byte to
more accurately test this.
Fixes T74610
Ref T68926
Differential Revision: https://developer.blender.org/D14899
Issue is that the operator acts on the active button, and also uses that in the
poll. So the actually active button would affect the poll of a different
button. For the superimposed icons we need to be able to execute these polls
properly for non-active buttons.
This enables temporarily overriding the active button for lookups via context.
While a bit of a hack it makes sense conceptually.
Reviewed By: Campbell Barton
Maniphest Tasks: T97518
Differential Revision: https://developer.blender.org/D14880
Steps to reproduce were:
- Factory startup
- Right-click in 3D View
- Move the mouse over "Shade Flat", wait for the tooltip
The changed logic in 4680331749 to lookup an active button was
incorrect. It didn't respect the priority of active button candidates.
Issue is that the operator acts on the active button, and also uses that in the
poll. So the actually active button would affect the poll of a different
button. For the superimposed icons we need to be able to execute these polls
properly for non-active buttons.
This enables temporarily overriding the active button for lookups via context.
While a bit of a hack it makes sense conceptually.
Reviewed By: Campbell Barton
Maniphest Tasks: T97518
Differential Revision: https://developer.blender.org/D14880
Regression caused by [0] which made `ui_but_is_interactive` consider
label buttons with tool-tips to be interactive. This prevented
the clicks to pass through to the nodes for selecting/dragging.
Resolve this by allowing buttons to be activated for the purpose
of showing tool-tips but otherwise considering them disabled
(as if the UI_BUT_DISABLED is set when handling events).
[0]: 484a914647
Reviewed By: Severin
Ref D14932
As a side effect the "sticky" search area on resize/move is also
resolved now: previously attempt to move search area past to where
it could be would make it hard to move it back. Now the search area
will always respond immediately to mouse motion, even after it got
clamped.
When extracting UV point indices, only the vertex points coming from the
original geometry should be drawn. For this, the routines (for subdivision
and coarse meshes) would only consider a vertex to be real if the extraction
type is `MAPPED`, and that an origin index layer on the vertices exist
with a valid origin index for the current vertex.
However, if the extraction type is `MESH`, which can happen with for
example an empty Geometry Node modifier, or with deferred subdivision,
this would consider every vertex to not be "real" and therefore hidden from
the UV editor.
This reworks the condition for "realness" to also consider a vertex to be
real if there is no origin layer on the vertices. The check on the extraction
type is removed as it becomes redundant.
This only modifies the check in the UV data extraction for point indices,
however similar checks exist throughout the extraction code, these will
be dealt with separately in master.
Differential Revision: https://developer.blender.org/D14773
Since rB2a7a01b339ad, `lineSmooth` has lost its default value of true.
rBa0a99fb25284 only fixed the problem on master.
But thanks to @hitrpr for spotting the bug in version 3.2 too.
Differential Revision: https://developer.blender.org/D14876
MTLState module implementation and supporting functionality in MTLContext for state tracking, texture binding and sampler state caching.
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D14827
Update the trim icons so they don't show a dashed line. Instead they
have now a continuous red line.
This is important because the sculpting tools are planning to use the
same icons for selection as the regular tools. And those icons use
dashed line to represent selection.
Note the icon file has two new icons which are not used at the moment
(they are in the Unused collection):
* ops.generic.select_paint
* ops.generic.select_line
Disable the new more accurate timing code, this is not needed for Blender.
In USD itself this code is disabled on macOS anyway, so it should operate fine
without it.
Ref T97950, T95206
Differential Revision: https://developer.blender.org/D14928
`uiBut` contained a variable that was only used for these hot-key
buttons. This may also help getting rid of the `UI_BUT_IMMEDIATE` flag,
which is also only used for this button type. We are running out of
available bits for flags, so this would be useful.
Continuing the work from 49f088e2d0. Part of T74432.
This abuse of one one size value to handle another allocated array of a
different size is bad in itself, but at least now read/write code of
this modifier should not risk invalid memory access anymore.
NOTE: invalid memory access would in practice only happen in case endian
switch would be performed at read time I think (those switches only check
for given length being non-zero, not for a NULL data pointer...).
This is a bit tricky exceptional case, which originates to an original
motion tracking commit. Took a while to remember what it is ab out so
here is a comment for the future developers.
This reverts the commits 8d9d5da137,
59cd616534 and
98a04ed452.
The commits are causing issues with MSVC, see D14926. I'm working on a
different solution, but that will need some work.
This was because the main `surface_vert.glsl` was changed to accomodate the
needs of the `ShaderCreateInfo` but was still used by the cryptomatte
shader. The fix is to include the same libraries as the material shaders
and bypass `attrib_load()`.
This creates a new curves object with the name of the particle system.
The generated curves match the current evaluated state of the active hair
particle system.
Attachment information is not transferred currently.
Differential Revision: https://developer.blender.org/D14908
The OBJ parser was primarily using StringRef for convenience, with
functions like "skip whitespace" or "parse a number" taking an input
stringref, representing an input line, and returning a new stringref,
representing the remainder of the line. This is convenient, but does
more work than strictly needed -- while parsing, only the "beginning"
of the line ever changes by moving forward; the end of the line
always stays the same. We can change the code to take a pair of
pointers (begin of line, end of line) as input, and make the
functions return the new begin of line pointer. This makes the return
value neatly fit into a processor register, which StringRef did not.
On Windows, this does result in non-trivial speedups in the actual
OBJ file parsing part, due to Windows calling convention where return
values larger than 64 bits are returned via memory. Does not
measurably affect performance on Mac/Linux, because the calling
convention there uses a pair of 64-bit registers to return a
StringRef.
End-to-end times of importing several test files, on Windows
(VS2022 build, Ryzen 5950X):
- Monkey subdivided to level 6, no normals (220MB file): 1.25s -> 0.85s
- Rungholt minecraft level (270MB file): 7.0s -> 5.8s
- Blender 3 splash scene (2.4GB file): 49.1s -> 45.5s
The full import process has a lot of other overhead besides actual
OBJ file parsing (mostly creating actual blender objects out of
parsed data). In pure parsing, in the monkey test scene above, the
parsing part goes 1.0s -> 0.6s.
Reviewed By: Howard Trickey
Differential Revision: https://developer.blender.org/D14936
This was caused by the `mb_data->obmat[]` being wrong because they are
now shared between the particle system and the object.
But Hair need the dupli parent matrix instead of the object matrix.
Disabling `Show Emitter` option fixes the bug.
To avoid this problem, request a different `EEVEE_ObjectMotionData`
for particle systems using a different key pointer in the hash.
This is a bit dirty but there is less code polution using this workaround.
Differential Revision: https://developer.blender.org/D14911
Pattern is expected to be freely resized to any size, and the search
area s to become bigger when needed.
Remove confusing pattern size clamping which was actually clamping
search area.
There should be no functional changes.
There are two problems when adding a paint slot to an object without an
existing material. First, the `invoke` method creates a material on the
object. This modifies the object even if the operation is not executed.
Second, the fill color defaults to black when there is no existing
material (even when adding a normal, bump, or displacement layer).
This patch moves the material creation to the `exec` method.
When no material exists on the object, a default Principled BSDF is
referenced for default colors in the `invoke` method.
Differential Revision: https://developer.blender.org/D14828
If merging is enabled, the mesh might be recreated before
the dirty flag can be cleared, which means the normals aren't
valid anymore. To fix this, clearing the dirty flag should happen
before the merging. This is an existing bug, just exposed by
more recent explicit dirty normal tagging.
In rare cases the mesh has not been evaluated when snapping, this fix
just prevents the crash as is done elsewhere in Blender when the
evaluated mesh isn't available, there is a separate report (T96536)
about evaluation not working properly.
This completes support for tiled texture packing on the Blender / Cycles
side of things.
Most of these changes fall into one of three categories:
- Updating Image handling code to pack/unpack tiled and multi-view images
- Updating Cycles to handle tiled textures through BlenderImageLoader
- Updating OSL to properly handle textures with multiple slots
Differential Revision: https://developer.blender.org/D14395
Having to manually increase all other flag values to be able to add a
new internal flag is quite annoying. Just make space for a few more
once.
Generally I'd say internal flags are preferable, since it increases
encapsulation. So good to avoid making this a hassle.
Now add a default ".usdc" file extension if no (or the wrong) extension
is given instead of presenting the user with the error that "no suitable
USD plugin to write is found".
This is in line with how other exporters do this.
Maniphest Tasks: T97947
Differential Revision: https://developer.blender.org/D14895
This patch adjusts the UI layouts for the tool header and the tool
properties in sculpt mode in a few ways. The goals are to better group
related settings, keep fundamental settings easily accessible, fix the
availability of some options, and make better use of space.
1. Remove ID template in tool header
2. Rename "Add Amount" to "Count" for add brush
3. Add "use pressure" toggles to radius and strength sliders
4. Move strength falloff to a popover
5. Move many "Add" brush settings to popover called "Curve Shape"
6. Move two "Grow/Shrink" options to a popover called "Scaling"
7. Don't display "Falloff" panel in properties when it has no effect
See the differential revision for screenshots and more reasoning.
Differential Revision: https://developer.blender.org/D14922
GLSL has different max number of ssbo per glsl stage.
This patch checks if the number of compute ssbo blocks matches
our requirements for the GPU Subdiv, before enabling it.
Some platforms allow more ssbo bindings then blocks per stage.
GLSL has different max number of ssbo per glsl stage.
This patch checks if the number of compute ssbo blocks matches
our requirements for the GPU Subdiv, before enabling it.
Some platforms allow more ssbo bindings then blocks per stage.
This is useful without any functionality specific to attribute domains,
rename to `BLI_str_format_decimal_unit` to follow naming of a similar
function `BLI_str_format_byte_unit`.
Geometry nodes can generate color attributes that aren't on point or corner domain.
When not found in these domains it will be processed as a common attribute.
Add a property to the **Shade Smooth** operator to quickly enable the Mesh `use_auto_smooth` option.
The `Angle` property is exposed in the **Adjust Last Operation** panel to make it easy to tweak on multiple objects without having to go to the Properties editor.
The operator is exposed in the `Object` menu and `Object Context Menu`.
=== Demo ===
{F13066173, size=full}
Regarding the implementation, there are multiple ways to go about this (like making a whole new operator altogether), but I think a property is the cleanest/simplest.
I imagine there are simpler ways to achieve this without duplicating the `use_auto_smooth` property in the operator itself (getting it from the Mesh props?), but I couldn't find other operators doing something similar.
Reviewed By: #modeling, mont29
Differential Revision: https://developer.blender.org/D14894
Steps to reproduce were:
- Open Clip Editor
- Call "Open Clip" (e.g. Alt+O)
- Select video file
The file wouldn't be loaded into the Clip Editor.
Caused by 7849b56c3c.
Manually revert commit [0] as it caused problems macOS (reported T96435).
- Includes fixes from [1] & [2].
- T98037 TODO has been created to keep track of this feature.
Thanks to @jbakker & @sergey for investigating this issue as I wasn't
able to reproduce the bug.
[0]: 0cb5eae9d0
[1]: cb986446e2
[2]: cc8fe1a1cb
Subtracting one from the evaluated index could make the index -1.
That was only necessary for Bezier curves due to the specifics of
the "bezier_evaluated_offsets".
This feature is very advanced, and the way it was exposed in the
Outliner was very confusing at best.
It remains available through the Python API (`ID.user_remap`) e.g.
This was historically the only way to change/fix paths of library files
in Blender. However, only changing the path then required a manual
reload of the library, which could be skipped by user, or a save/reload
of the working .blend file, which could lead to corruption of advanced
library usages like overrides.
Prefferred, modern way to change path of a library is to use the
Relocate operation instead. Direct path modification remains possible
through RNA (python console or the Data API view in the Outliner.
This release deprecated the Parameterization API and the new Manifolds
API is to be used instead. This is what was done in the Libmv as part
of this change.
Additionally, remove the bundling scripts. Nowadays those are only
leading to a duplicated work to maintain.
No measurable changes on user side is expected.
Knife projection BVH-tree lookup could use invalid indices since the
mesh being cut is also used for BVH intersection tests.
Solve by storing triangle indices when knife project is used so a
triangle index can always be used to look up original coordinates of a
triangle.
When doing a lite build, a warning is displayed
that due to PUGIXML being off WITH_CYCLES_OSL
is being disabled as well.
If WITH_CYCLES is off this is just useless
noise.
this diff changes the warning to only emit when
WITH_CYCLES is on.
This is caused by the geometry shader used by the edit mode line drawing.
If the drawcall uses indexed drawing and if the index buffer only contains
restart indices, it seems the result is 1 glitchy invocation of the
geometry shader.
Workaround by tagging these special case index buffers and bypassing
their drawcall.
Assume geometry is always potentially animated, since we can't use our heuristic
to detect if the object is potentially animated by looking at modifiers on the
object.
The main original reason for this check was to avoid evaluating subdivision
surfaces for many static objects, which is not happening here anyway.
Geometry Nodes (new) icon. So far we were using the generic node-tree
icon for geometry nodes, not anymore.
The new icon is composed of 4 spheres that is a reference to the
original pebbles demo. Scattering points was also the turning point for
the project (which originally was focusing on dynamic effects), and to
this day is one of the first steps for everything procedural such as
hair.
Note that the modifier icon is still showing as white in the outliner.
The alternative is to be blue everywhere.
Patch review and feedback by Hans Goudey.
Icon creation in collaboration with Pablo Vazquez.
This commit adds an option to interpolate the number of control points
in new curves based on the count in neighboring existing curves. The
idea is to provide a more automatic default than manually controlling
the number of points in a curve, so users don't have to think about
the resolution quite as much.
Internally, some utilities for creating new curves are extracted to a
new header file. These can be used for the various nodes and operators
that create new curves.
The top-bar UI will be adjusted in a separate patch, probably moving
all of the settings that affect the size and shape of the new curves
into a popover.
Differential Revision: https://developer.blender.org/D14877
New OBJ exporter is missing "Path Mode" setting for exporting .mtl
files. The options that used to be available were: Auto, Absolute,
Relative, Match, Strip Path, Copy. All of them are important. The new
behavior (without any UI option to control it) curiously does not match
any of the previous setting. New behavior is like "Relative, but to the
source blender file, and not the destination export file".
Most of the previous logic was only present in Python based code
(bpy_extras.io_utils.path_reference and friends). The bulk of this
commit is porting that to C++.
Reviewed By: Howard Trickey
Differential Revision: https://developer.blender.org/D14906
Code was not really designed to hanlde corrupted (e.g. local ID) root
hierarchies, now it should handle better those invalid cases and restore
proper sane situation as best as possible.
Fixes crashes with some corrupted files from Blender studio.
The old method is not thread safe, which will lead to minor
memory leaks. This patch fixed that.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D14904
Previously the bottom left of a pixel was used during pixel extraction what resulted in
that the pixels were moved a bit to the bottom left. By using the center uv pixel the
extracted pixels are more balanced and would improve future features like seam bleeding.
Use the same method for node selection and dragging that is used
in the 3D viewport and UV editor. Instead of relying on a modal
operator - use the keymap to handle click/drag events.
Details:
Failure to transform unselected nodes was caused by [0] & [1] however
detecting drag relied on specific behavior which I don't think we should
be depending on.
This error happened when selection was defined both in the key-map for
the tool and for the node-editor.
- The left mouse button would activate selection in both the tool
and "Node Editor" keymap.
- The first selection would return `FINISHED | PASS_THROUGH` when
selecting a previously unselected node.
- The same PRESS would trigger a second selection would return
`RUNNING_MODAL | PASS_THROUGH`,
(starting a NODE_OT_select as a modal operator).
- In 3.1 (with tweak events) the modal operator would then exit and
fall-back to the tweak event which would transform the selected
nodes.
- In 3.2 (as of [0]) the PRESS that starts the modal operator is
considered "handled" and prevents drag event from being detected.
The correct behavior in this case isn't obvious:
If a modal operator starts on pressing a button, using that same the
release to generate drag/click events is disputable.
Even in the case or 3.1 it was inconsistent as tweak events were
generated but click events weren't.
Note: after investigating this bug it turns out a similar issue already
existed in 2.91 and all releases afterwards. While the bug is more
obscure, it's also caused by the tweak event being interrupted as
described here, this commit resolves T81824 as well.
[0]: 4d0f846b93
[1]: 4986f71848
Reviewed By: Severin
Ref D14499
This is part of a fix for T88570, where the file selector would crash
when activated multiple times.
Calling save multiple times would free the operator, leaving a dangling
pointer which was used when panels were visible that accessed the
"active_operator".
Reviewed By: Severin
Ref D14905
The acquire locking of the draw manager introduced other issues.
The current implementation was a hacky solution as we know that the
final solution is something totally different {T98016}.
Related issues:
* {T97988}
* {T97600}
The acquire locking of the draw manager introduced other issues.
The current implementation was a hacky solution as we know that the
final solution is something totally different {T98016}.
Related issues:
* {T97988}
* {T97600}
Existing code to replace the file operation was failing when done from
the window for the file operation itself.
Basically, this patch does two things:
- Implement a well defined window context to use as the "owner" or
"root" of the File Browser. This will be used for managing the File
Browser and to execute the file operation, even after the File Browser
was closed.
- Ensure the context is valid when dealing with file File Browser event
handlers.
Previously the window context just wasn't well defined and just happened
to work well enough in most cases. Addressing this may unveil further
issues, see T88570#1355740.
Differential Revision: https://developer.blender.org/D13441
Reviewed by: Campbell Barton
Viewports where cleared explicitly due to compatibility reasons with Intel iGPUs.
This slowed down other platforms as well, this wasn't noticeable on all platforms.
This patch will be more selective when to enable the workaround.
Currently only for iGPUs on Mac + Linux.
Introduced by {35594f4b92fa4cbb5b848f447b7a3323e572b676}.
Some platforms do not support temp variables to be used as inout parameter.
Detected on Mac with Intel iGPU.
During UV unwrapping, Cube Projection, Sphere Projection, Cylinder
Projection and Project From View (in the 3D Viewport), when "Correct
Aspect" toggle is active, it now uses a query cache to perform a
per-face aspect ratio ("per_face_aspect") correction for the active
image of each face.
Reviewed By: campbellbarton
Ref D14852
Some drivers completely forbid quote characters even in unused
preprocessor directives.
This patch adds a debug build check for all `.glsl` files that need to
be manually handled. For shared headers with `#include` directives, we
need to do runtime patching of the source to remove the quote.
Also fix an instance of the quotes check failing in `eevee_next`.
This was caused by the `Closure` members being added to the final contribution
more than once. The workaround is to clear the members once a closure has
been added to the final contribution. I used `inout` on `Closure` inputs
so that the render engine implementation of mix and add closure nodes
can do its own thing. The nodegraph handling of inout was changed for this
to work.
OCIO could build before pystring and imath due to
OCIO missing the dependencies on these two projects
No rebuild required as the build would have failed
during the libs build if you ran into this issue.
Curve tangent was correctly mistaken with curve normal.
This patch fixes the name of the output in the glsl function and make curve
attributes more explicit (with `curve_` prefix).
This also improve the normal computation by making it per pixel to match
cycles.
Also ports the changes to eevee-next.
The previous 3.1 libraries (accidentally) used glApi instead of GLEW and were
working for GPU subdivision, so revert to that. There's a suspected conflict
with Blender's own bundled GLEW or other issue with GLEW, causing the crash in
T97737.
The current GPU subdivision implementation does not need OpenCL, CUDA or GLFW.
So also remove libraries needed for that. It's simpler to stick to compute
shaders in OpenGL/Vulkan/Metal and not involve additional APIs.
Ref T95206
Differential Revision: https://developer.blender.org/D14898
Apply a change similar to e130903060 for
`parallel_reduce`, just like `parallel_for`. I measured a performance
improvement in viewport FPS of at least 10% with 1 million small
instances (one bottleneck was computing many small bounding boxes).
The mesh drawing code used a different mesh to check whether or not to
draw face dots and to actually retrieve them. The fix is moving the
responsibility of determining whether to use subsurf face dots to the
creation of `MeshRenderData` where the mesh used for drawing is
known, rather than doing it at a higher level.
Differential Revision: https://developer.blender.org/D14855
The mesh drawing code used a different mesh to check whether or not to
draw face dots and to actually retrieve them. The fix is moving the
responsibility of determining whether to use subsurf face dots to the
creation of `MeshRenderData` where the mesh used for drawing is
known, rather than doing it at a higher level.
Differential Revision: https://developer.blender.org/D14855
The modifier is supposed to create a Curves data block soon, which
helps with the transition to the new Curves object in drawing code.
Utilities for the new Curves object are mostly in C++.
`TEMPERATURE` type was also missing, not only the new-ish
`TIME_ABSOLUTE` one...
Added a static assert on the size of the `bpyunits_ucategories_items`
array, and a comment on anonymous enum of `B_UNIT_`, in the hope this
won't happen again in the future.
For consistency with other force fields and other areas in Blender.
* Align "Use Max" and "Maximum Distance" in one line.
* Rename "Maximum Distance" to "Max Distance"
* Rename "Minimum Distance" to "Min Distance"
* Move "Minimum Distance" below maximum.
The "cast-align" warning is only triggered on Arm CPUs when using GCC.
Currently the only officialy supported ARM platform is the Mac platform
where we use Clang. So this warning never triggers.
NLA track option buttons (lock track, etc.) now no longer respond to
clicks when they are hidden.
The bug stems from the fact that there was duplicate input handling
going on for the buttons: once in the normal button UI system, and then
again in the `mouse_nla_channels` function. The logic in
`mouse_nla_channels` does not inspect whether or not the setting button
is there or not, it just assumes that it is.
This function should no longer be handling mouse input for buttons
(there is even comment suggesting that the button handling to be
deprecated) since the button UI system already handles it. Therefore,
the button handling code has been removed from that
`mouse_nla_channels`.
In addition, the redundant mouse button handling for pressing the "Push
Down Action" button has also been removed from this function as well.
Reviewed By: sybren, lichtwerk
Differential Revision: https://developer.blender.org/D14868
On certain systems when eevee is used in a 3d viewport could crash. It
happened more often on slower systems or systems with slower glsl compilers.
For example an Intel Mac Mini. The cause was that even if a GPUMaterial
was in used it could be freed.
The purpose of this patch is to add the option to create a color
attribute paint slot from the canvas selector when in material mode.
See the discussion here: T97346
---
|Add Image Paint Slot|Add Color Attribute Paint Slot|
|{F13016547 size=full}|{F13032911 size=full}|
Reviewed By: HooglyBoogly, joeedh
Differential Revision: https://developer.blender.org/D14724
Adds an example python script to the documentation for the 3D_IMAGE shader.
The **use-case** is to draw textures with 3D vertex positions, in XR views as well as non-XR views (in a simpler manner).
**Testing**: I've tested that this compiles and works on my Macbook (with the example python script included in this change). I don't have access to a Windows or Linux machine right now, but this change doesn't look platform-specific and no new glsl shaders have been added or edited by this change. I'll try to get access to a Windows machine, but if someone does have one, I'd be really grateful if they could try this change. Thanks!
**Problem addressed**: The existing 2D_IMAGE shader (exposed in the python API) gets near-clipped when drawn in the
XR view, regardless of the near-clip settings. Additionally, the 2D_IMAGE shader only accepts 2D
positions for the image vertices, which means drawing textures in 3D requires providing
2D coordinates and then pushing a transform-rotate-scale matrix to the GPU, even for
non-XR (i.e. WINDOW) views. The 3D_IMAGE shader is simpler: it accepts 3D vertex positions, and doesn't require
any additional work by the scripter.
**Workaround**: The current workaround is to use custom shaders in the python script.
**Non-intrusive change**: No new glsl shaders were added. This change just bundles two existing shaders: the vertex shader used
by the 3D_IMAGE_MODULATE_ALPHA shader, and the fragment shader used by the 2D_IMAGE shader.
Reviewed By: #eevee_viewport, jbakker
Differential Revision: https://developer.blender.org/D14832
For some reasons the mipmap count was not set to max during creation.
Probably it was mistaken with the UDIM tilemap texture which is only
1D and has only one mipmap.
This is because some drivers / GPU actually still do double buffer swapping
but others don't. Adding this do ensure the background color of the first
redraw.
Note that this fix was not tested on the problematic hardware and might not
solve the issue.
This was because the alpha clip thresholding was previously done in the
material nodes codegen. Now it is the responsibility of the engine to
implement it.
This adds a loose uniform that is set by EEVEE itself to control the clip
behavior.
Partially reverts rB46ae0831134 now that we have a new version of
OSL/OIIO that supports <UVTILE> directly.
Differential Revision: https://developer.blender.org/D14851
The use-case is to allow an event handler (in C or a plugin) to
distinguish which hand produced the XR event.
The alternative is to register separate actions for each hand (e.g.
"trigger_left" and "trigger_right"), and duplicate the device bindings
(Oculus, HTC Vive, etc) for each action. Other than the problem of code
duplication, this isn't conceptually efficient since "trigger_left" and
"trigger_right" both represent the same event "trigger", and the
identity of the hand that produced that event is just a property of
that event.
Adds two string fields to the XrEventData called user_path and
user_path_other. The user_path_other field will be populated if the
event is a bimanual one (i.e. two-handed). This follows the pattern
used by the rest of the XrEventData struct for bimanual events (e.g.
state, state_other).
Reviewed By: muxed-reality
The text would start somewhere in the middle of the line, and just look placed
wrong. Plus it would seem like it's cut off (esp. since we don't add a period).
Makes the File Browser filter by .obj and .mtl files by default again. Note
that this commit focuses on fixing this specific bug, further
refactors/tweaks/fixes are planned (see D14863).
Differential Revision: https://developer.blender.org/D14862
Reviewed by: Aras Pranckevicius
Makes the File Browser filter by .obj and .mtl files by default again. Note
that this commit focuses on fixing this specific bug, further
refactors/tweaks/fixes are planned (see D14863).
Differential Revision: https://developer.blender.org/D14862
Reviewed by: Aras Pranckevicius
An alternate to D14839, implemented in Python and
relying on bpy.data.user_map(). That function
gives us a mapping of what ID is referenced by
what set of IDs. The inverse of this would also
be useful, which is now available from
bpy_extras.id_map_utils.get_id_reference_map().
From there, we can use get_all_referenced_ids()
to get a set of all IDs referenced by a given ID
either directly or indirectly.
To get only the direct references, we can simply
pass the ID of interest as a key to the dictionary
returned from get_id_reference_map().
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D14843
When resizing a viewport all engine instance data was cleared.
This wasn't the intended design and lead to performance regressions
in the image engine.
This patch makes sure that the instance data isn't cleared when
the viewport size changes. When using instance data, draw engines
are responsible to update the textures accordingly.
This could also reduce flickering/stalling when resizing the viewport
in eevee-next.
Fixes T95428.
Reviewed By: fclem
Maniphest Tasks: T95428
Differential Revision: https://developer.blender.org/D14874
Since rB2a7a01b339ad, `lineSmooth` has lost its default value of true.
So set the value when creating the shader.
Differential Revision: https://developer.blender.org/D14876
When using GCC, clang-tidy will still use clang under the hood but GCC
flags will still be passed. Therefore we will ignore any warnings about
unrecognized flags as we don't care about this when running clang-tidy.
After some internal discussion it was decided that we should ignore name
variable length tidy warnings. Otherwise we would have warnings for
every variable that is under three characters long.
Additionally we will also ignore any warnings when including non header
files as the Unity library in our build system uses this excessively
This extends the existing object type conversion operator.
Currently, it is limited to converting to curves when the evaluated
source mesh actually has curves. This might not be the case when
it is converted to a mesh by some modifier during evaluation.
Differential Revision: https://developer.blender.org/D14872
This patches rewrites the GPU shaders of curve nodes for easier future
development. This is a non-functional change. The new code avoids code
duplication by moving common code into BKE curve mapping functions. It
also avoids ambiguous data embedding into the gradient vectors that are
passed to vectors and reduces the size of uniforms uploaded to the
shader by avoiding redundancies.
This is needed in preparation for the viewport compositor, which will
utilize and extend this implementation.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D14689
This patch moves some of the utility library shaders into a common
directory and makes the necessary renames across shaders. Additionally,
material-specific transform functions were moved outside of math utils
into a separate transform_utils.glsl file.
This is needed in preparation for the viewport compositor, which will
make use of some of those utilities and will require all material
specific bit to be removed out of those files.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D14688
The different methods are too different. It is worth having them as
individual choices by the users.
Differential Revision: https://developer.blender.org/D14873
This patch implements T97613, switching viewport shading when using Color Filter and Mask By Color
ALSO, this patch makes it so viewport shading color switches only when SOLID mode is chosen, to prevent color switching when using other shading modes, without user noticing it.
{F13049889}
Reviewed By: JulienKaspar, joeedh, jbakker
Maniphest Tasks: T97613
Differential Revision: https://developer.blender.org/D14765
* Removes the `Curves` menu (leaving only `Curve`).
* The `Curve > Random` option is still useful for testing, but it's under
the second experimental flag so that it is turned off when only the
"master ready" features are enabled.
Differential Revision: https://developer.blender.org/D14861
Add support for volume (OpenVDB) USD export:
- Allows to export both static and animated volumes.
- Supports volumes that have OpenVDB data from files or are generated in
Blender with 'Mesh to Volume' modifier.
- For volumes that have generated data in Blender it also exports
corresponding .vdb files. Those files are saved in a new folder named
"volumes".
- Slightly changes the USD export UI panel. "Relative Texture Paths"
becomes "Relative Paths" (and has separate UI box) as the
functionality will now apply to both textures and volumes. Disabling
of this option due to "Materials" checkbox being turned off has been
removed.
Reviewed By: sybren, makowalski
Differential Revision: https://developer.blender.org/D14193
Manifest Task: T95407
This patch adds a float3x3 class that represents a 3x3 matrix. The class
can be used to represent a 2D affine transformation stored in a 3x3
matrix in column major order. The class provides various constructors
and processing methods, which utilizes the existing mat3 utilities in
BLI. Corresponding tests were also added.
This is needed by the upcoming viewport compositor to represent domain
transformations.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D14687
Related to T95616, the relationship between Image ID and ImBuf 'cached'
buffers can be fairly confusing when using the RNA API.
Reviewed By: campbellbarton, jbakker
Differential Revision: https://developer.blender.org/D14833
When the curve types array isn't allocated, the default type
is Catmull Rom. Because the type counts are calculated eagerly,
they must be in a valid state.
Regression caused by [0] which flushed selection from vertices -> edges,
causing additional edges to be selected. Now selected is flushed based
on the mode, instead of all elements. Note that these function names
could be improved to make it clearer how these flushing functions are
different.
Also skip flushing unless selection is performed.
[0]: 55c82d8380
Regression in [0] which is useful when applying modifiers as a shape-key
but not when applying modifiers which keeps the existing shape-keys.
[0]: 65c5ebf577
Check that lParam is non-NULL in WM_SETTINGCHANGE message handler.
See D14867 for details.
Differential Revision: https://developer.blender.org/D14867
Reviewed by Jesse Yurkovich
It was wrongly writing passes twice, for both the surface entry and exit points.
We can skip code for filtering closures, emission and holdout also, as these do
nothing with only a subsurface diffuse closure present.
For consistency with the rest of Blender.
* Use a blank icon for "None" type, so the label aligns with the rest.
* Use "None" instead of "Nothing" for Kink type dropdown entry.
The previous docs for `normal_update` methods of `BMVert`, `BMEdge`,
`BMFace`, and `BMesh` were not clear on some behaviors. These
behaviors are listed in D14370. This commit updates the docs to be
clearer.
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D14370
The ID is not modified by this function, so it can be const.
Needed to tweak const correctness for original ID accessor as
well. Additionally, did the same for accessor of evaluated ID
for symmetry.
The root of the issue is that compositor is using refresh mechanism
to handle recalc.
The safest fix which does not require deep refactor is to check to
whether node space was tagged for refresh from listener (currently
it is listeners which are responsible for tackling compositor tree
recalc).
Differential Revision: https://developer.blender.org/D14856
OptiX 7.4 adds support for splitting the costly creation of an OptiX
module into smaller tasks that can be executed in parallel on a
thread pool.
This is only really relevant for the "shader_raytrace" kernel variant
as the main one is small and compiles fast either way. It sheds of
a few seconds there (total gain is not massive currently, since it is
difficult for the compiler to split up the huge shading entry point
that is the primary one taking up time, but it is still measurable).
Differential Revision: https://developer.blender.org/D14845
While possible extra whitespace after all OBJ/MTL keywords was properly
skipped, it was not done for the "f" (face definition) keyword.
While at it, also support indented keywords, i.e. extra whitespace at
the beginning of the line.
There's a tiny bit of performance drop while importing (e.g. importing
blender 3.0 splash scene: 53.38sec -> 54.21sec on my machine). But
correctness is more important.
Reviewed By: Howard Trickey
Differential Revision: https://developer.blender.org/D14854
Support merging UV's that share the same vertex and are very close when
applying modifiers.
This is needed to prevent UV's becoming "detached" which can happen when
applying the subdivision surface modifier.
This regression was caused by [0] which removed selection threshold for
nearby coordinates. While restoring the UV selection threshold could be
done - some selection operations that walk around connected UV fans
wouldn't behave in a deterministic way (such as select shortest path).
There are also other cases where UV's may be compared without a
threshold such as tangent calculation and exporters which have their own
logic to handling UV's.
Also resolves T86896, T89903.
[0]: b88dd3b8e7
Reviewed By: sergey
Ref D14841
There are fancier possibilities for improvements, like taking ownership
of existing arrays in some cases, but this patch takes a simpler brute
force approach for now.
The first change is to move from the previous loop to using the new
`materialize_compressed_to_uninitialized` method on virtual arrays,
which adds only the selected values to the output. That is a nice
improvement in some cases, corresponding to the "Without Threading"
column in the chart below.
The next change is to call that function in parallel on slices of
the output. To avoid generating too much code, we can avoid
templating based on the type and devirtualizing completely.
The test input is a 4 million point grid, generated by the grid
primitive node. Color and 2D vector attributes were also transferred
to the points.
| Test | Before | Final No Threading | Final | Change |
| --------- | ------ | ------------------ | ------ | ------ |
| All Verts | 209 ms | 186 ms | 170 ms | 0.8x |
| 1% | 148 ms | 143 ms | 133 ms | 0.9x |
| All Faces | 326 ms | 303 ms | 87 ms | 0.27x |
| 1% Faces | 70 ms | 68 ms | 34 ms | 0.49x |
Differential Revision: https://developer.blender.org/D14661
Blender will respect Windows "Dark Mode" setting for title bar color.
See D14847 for details.
Differential Revision: https://developer.blender.org/D14847
Reviewed by Ray Molenkamp
Recently `gpu_shader_3D_smooth_color_frag.glsl` had the uniform declarations removed.
For shaders without `ShaderCreateInfo` that require this source this results in the error:
```
ERROR (gpu.shader): hair_refine_shader_transform_feedback_workaround_create FragShader:
|
54 | fragColor = finalColor;
|
| gpu_shader_3D_smooth_color_frag.glsl:5:0: Error: Use of undeclared identifier 'fragColor'
| gpu_shader_3D_smooth_color_frag.glsl:5:0: Error: Use of undeclared identifier 'finalColor'
|
55 | fragColor = blender_srgb_to_framebuffer_space(fragColor);
|
| gpu_shader_3D_smooth_color_frag.glsl:6:0: Error: Use of undeclared identifier 'fragColor'
| gpu_shader_3D_smooth_color_frag.glsl:6:0: Error: Use of undeclared identifier 'fragColor'
```
So port that shader to use `ShaderCreateInfo`.
Make preview thumbnails of JPEG files in less time and with less RAM.
See D14727 for more details.
Differential Revision: https://developer.blender.org/D14727
Reviewed by Brecht Van Lommel
This patch adds the show_gizmo and show_gizmo_navigate properties to the Image and UV editors.
Image Editor:
{F13026317}
UV Editor:
{F13026319}
VIDEO:
{F13026324}
Reviewed By: #user_interface, campbellbarton
Differential Revision: https://developer.blender.org/D14755
evice_update_preprocess is supposed to detect modified attributes and flag the
device_vector for a copy through device_update_flags. However, since object
attributes are only created in device_update_attributes afterwards, they can't
be included in that check.
Change the function that actually updates the device_vector to tag it as
modified as soon as its content gets updated.
Differential Revision: https://developer.blender.org/D14815
A shader node setup accidentally used the bump normal as emission. Bump
mapping nodes are excluded from light shader evaluation to reduce kernel size
and register pressure, but in that case should write zero instead of leaving
memory uninitialized.
Thanks to Lukas for helping identify the cause.
The coarse polygon count was set to the one of the BMesh instead of
the the one of the mesh used for subdivision, which caused the
compute shaders to output wrong data.
This adds an input to the Subdivision node to specify a field to use
for controling vertex creases. Common code with edge creasing was
extracted into utility functions to avoid redundancy.
Differential Revision: https://developer.blender.org/D14199
Inspired by D12936 and D12929, this patch adds general purpose
"Combine Color" and "Separate Color" nodes to Geometry, Compositor,
Shader and Texture nodes.
- Within Geometry Nodes, it replaces the existing "Combine RGB" and
"Separate RGB" nodes.
- Within Compositor Nodes, it replaces the existing
"Combine RGBA/HSVA/YCbCrA/YUVA" and "Separate RGBA/HSVA/YCbCrA/YUVA"
nodes.
- Within Texture Nodes, it replaces the existing "Combine RGBA" and
"Separate RGBA" nodes.
- Within Shader Nodes, it replaces the existing "Combine RGB/HSV" and
"Separate RGB/HSV" nodes.
Python addons have not been updated to the new nodes yet.
**New shader code**
In node_color.h, color.h and gpu_shader_material_color_util.glsl,
missing methods hsl_to_rgb and rgb_to_hsl are added by directly
converting existing C code. They always produce the same result.
**Old code**
As requested by T96219, old nodes still exist but are not displayed in
the add menu. This means Python scripts can still create them as usual.
Otherwise, versioning replaces the old nodes with the new nodes when
opening .blend files.
Differential Revision: https://developer.blender.org/D14034
Similar issue/solution as in rB5188c14718c5 from this Monday actually,
there may be more of those still lurking around... Quite surprising they
all get reported now, this behavior has been in Blender since years.
The problem was the layer transformation was already applied in the layer and if we apply in the bake, we are doing double transformation.
Differential Revision: https://developer.blender.org/D14844
Unlike 3Dview snapping, UV snapping is always done to the UV closest to
the mouse cursor, no matter the distance.
From the user's point of view, this appears to be an inconsistency (See
{T93538}).
Therefore, set a minimum distance for snapping and, as in 3D View and
highlight the snap with a drawing of a circle.
Release Note: https://wiki.blender.org/wiki/Reference/Release_Notes/3.3/Modeling
Reviewed By: #uv_editing, campbellbarton
Maniphest Tasks: T93538
Differential Revision: https://developer.blender.org/D13873
This patch replaces BMesh conversion into index-based triangle adjacent
lookup method, and use multithread in many steps to speed up object
loading for line art.
Differential Revision: https://developer.blender.org/D14627
Reviewed By: Sebastian Parborg (zeddb)
The issue was that the `NodeTreeRef` acceleration data structure was
rebuild much more often than necessary. That happened because the
Map Range node accidentally tagged the node tree for change even
though it did not actually change.
Differential Revision: https://developer.blender.org/D14842
Now there are two experimental feature options:
* "New Curves Type": Enables the new data type and a couple of tools
that are meant to be in the first release that comes with the new curves object.
* "New Curves Tools": This is only available when the new curve type is available
as well. It mainly exists to keep some tools experimental even after the initial
curves object is release officially.
* For now this only includes the curves edit mode which is not usable yet and
probably won't be for the initial release.
Differential Revision: https://developer.blender.org/D14840
Fixes T97794 (which is a reintroduction of an older issue T67266 that
has been fixed in the python importer, but the fix was not in the C++
one). Some software produces OBJ files with mtllib statements like
mtllib "file name in quotes.mtl", and the new importer was not stripping
the quotes away.
While at it, I noticed that MTLParser constructor was taking a StringRef
and treating it as a zero-terminated string, which is not necessarily
the case. Fixed that by explicitly using a StringRefNull type.
Reviewed By: Howard Trickey
Differential Revision: https://developer.blender.org/D14838
Use `src` and `dst` instead of less common variable names,
less redundant logic, simpler use of const, and "typename"
for template arguments instead of "class".
For example, this can be used to find the indices of all Bezier curves
inside an existing selection. The important part is that it is optimized
for the case when all curves have the same type.
Fix regression described in T97799.
Apply layer transform and layer parenting to all visible frames, i.e. active frame + onion skinning frames.
Reviewed By: #grease_pencil, antoniov
Maniphest Tasks: T97799
Differential Revision: https://developer.blender.org/D14829
When the profile only has one control point, its segment count was
determined incorrectly. There needs to be a special case for a single
control point, when there are no segments even if the curve is cyclic.
A studio request actually.
The goal is to cover rather typical situation: when the mesh was
bound to target when the target was on subdivision level 0 but
uses a higher subdivision level for rendering. Example of such
setup is a facial hair bound to the face.
The idea of this change is to use first N vertices from the target
where N is the number of vertices on target during binding process.
While this sounds a bit arbitrary it covers typical modifier setup
used for rigging. Arguably, it is not more arbitrary than using a
number of polygons (which is how the modifier was checking for
changes on target before this change).
Quite straightforward change. A bit tricky part was to not break
the behavior since before this change we did not track number of
vertices sued when binding. The naming I'm also not super happy
with and just followed the existing one. Ideally the variables in
DNA will be prefixed with `target_` but doing it for an existing
field would mean compatibility change, and only using prefix for
the new field will introduce weird semantic where the polygons
count will be even more easily confused with a count on the
deforming mesh.
Differential Revision: https://developer.blender.org/D14830
Make it explicit that counter is about target mesh.
Use DNA rename for it so that the files stay compatible.
Also renamed some purely runtime fields to replace `t`
prefix with `target` as the short `t` is super easy
to miss.
Differential Revision: https://developer.blender.org/D14835
NURBS curves can be invalid when the order is less than the number
of points, or in a few other situations. Currently the evaluated data of
an invalid NURBS curve is empty. This is inconvenient because it
requires checking for empty curves when it otherwise wouldn't be
necessary. This patch replaces that fallback with copying the original
data to the evaluated points. This makes conceptual sense too, as if
the curve couldn't be evaluated-- which wouldn't necessarily delete it.
Usually the UI protects against this happening, but it's currently
possible to create an invalid curve with some operations like the
delete geometry node.
Differential Revision: https://developer.blender.org/D14837
This adds support for X/Y/Z symmetry for all brushes in curves
sculpt mode. In theory this can be extended to support radial
symmetry, but that's not part of this patch.
It works by essentially applying a brush stroke multiple with
different transforms. This is similiar to how symmetry works in
mesh sculpt mode, but is quite different from how it worked in
the old hair system (there it tried to find matching hair strands
on both sides of the surface; if none was found, symmetry did
not work).
Differential Revision: https://developer.blender.org/D14795
Recalc selection count at the end of the circle selection.
This was removed from circle selection as it became a performance
bottleneck, helas some operators rely on it.
These kinds of depsgraph evaluations should not be marked as low priority as
this could negatively affect playback performance. Low priority should mainly
be used for background tasks.
Isolate frame writing task so that multithreaded image operations don't cause
the thread to start writing another frame. If that happens we may reach the
MAX_SCHEDULED_FRAMES limit, and cause the render thread and writing threads to
deadlock waiting for each other.
Additionally, don't set task priority to low because this may cause the task
scheduler to be slow in scheduling the write and color management tasks.
This patch enables operator presets for Alembic exports.
The export menu has many options, so enabling the feature
will help users manage their export settings in the same
way they can with other filetypes.
This also fixes restoring the default operator value for
setting the frame range.
Differential Revision: https://developer.blender.org/D12849
Overwriting UV map or vertex color data in Geometry nodes will move the
layers to another CustomData channel, and as such, will make attribute
lookup fail from the UVMap and Vertex Color nodes in EEVEE as the
CustomDataType will also be modified (i.e. no longer `CD_MTFACE` or
`CD_MCOL`).
As discussed in T93179, the solution is to use `CD_PROP_AUTO_FROM_NAME`
so that the render engine is able to find the attributes. This also makes
EEVEE emulate Cycles behaviour in this regard. `attr_load_uv` and
`attr_load_color` are also removed in favor of the generic attribute
API in the various GLSL shaders.
Although `CD_PROP_AUTO_FROM_NAME` is now used even for UV maps, the
active UV map is still used in case the attribute name is empty, to
preserve the old behavior.
Differential Revision: https://developer.blender.org/D13730
The crash is caused as the data for the UV editor is requested before
the data for the mesh as a separate draw update. Since building the UV
stretch angle buffer requires the position buffer, the latter is not
created yet in this case.
To fix this, create a local position buffer from the subdivision data. An
alternate fix was considered to remove the dependency on the position
buffer by interpolating on the GPU the coarse stretch angle buffer but
this did work. Maybe this will be revisited.
Contrary to `CompositorNodeCustomGroup` or `ShaderNodeCustomGroup`,
`GeometryNodeCustomGroups` have to define their own poll function.
This is because their is no predefined poll function for `GeometryNode`,
and it may not be clear for addon developers why `GeometryNode` would
be special here.
This adds `GeometryNode` to `bpy_types.py` and defines such a function
for it like for other builtin node types.
Differential Revision: https://developer.blender.org/D14775
No functional or performance changes expected. This change
makes it simpler to run multiple operation "delete" operations
but only reallocate the curves data arrays a single time.
- Fix T97793: when a UV coordinate after vt is missing, use zero. While
at it, also use zeroes for positions & normals, since "maximum
possible float" is very likely to cause issues in imported meshes.
- Fix T97795: use 1.0 default if -bm value is missing, instead of zero.
Reviewed By: Howard Trickey
Differential Revision: https://developer.blender.org/D14826
Fix several correctness issues where the new OBJ/MTL importer was not
producing the same results as the old one, mostly because the code for
some reason had slightly different logic. Fixes T97757:
- When .obj file tries to use a material that does not exist, the code
was continuing to use the previous material, instead of creating new
default one, as the previous importer did.
- Previous importer was always searching/parsing "foo.mtl" for a
"foo.obj" file, even if the file itself does not contain
"mtllib foo.mtl" statement. One file from T97757 repros happens to
depend on that, so resurrect that behavior.
- When IOR (Ni) or Alpha (d) are not specified in .mtl file, do not
wrongly set -1 values to the blender material.
- When base (Kd) or emissive (Ke) colors are not specified in the .mtl
file, do not set them on the blender material.
- Roughness and metallic values used by viewport shading were not set
onto blender material.
- The logic for when metallic was set to zero was incorrect; it should
be set to zero when "not using reflection", not when "mtl file does
not contain metallic".
- Do not produce a warning when illum value is not spelled out in .mtl
file, treat as default (1).
- Parse illum as a float just like python importer does, as to not
reintroduce part of T60135.
Reviewed By: Howard Trickey
Differential Revision: https://developer.blender.org/D14822
Selecting Action channel in NLA now sets the context in the N-panel. The
actively selected channel is now also drawn in a different way, so that
it's visible which one is selected.
Old:
- The NLA sidebar didn't refresh with the creation of a new action.
- There was no indication of the action channel being selected.
New:
- NLA side bar now refreshed when keyframes are added (new action is created)
- Clicking on the action channel now gives visual indication of being selected
Reviewed By: RiggingDojo, sybren
Maniphest Tasks: T97372
Differential Revision: https://developer.blender.org/D14820
Regression from rB1a7757b0bc69/rBa0acb9bd0cc0. Special handling
(averaging) of weights on merged center vertices also requires to be
'reversed' when new correct merge order is used, compared to previous
behavior.
Run autopep8 as well as clang-format when calling "make format",
the PATHS argument is passed to both utilities which will only operate
on files they support.
For example: `make format PATHS=release/scripts` formats Python scripts,
`make format PATHS=source/blender/blenlib` would format C/C++.
If users really want they can format C/C++ & Python files at the same
time since both formatting utilities filter on file extension.
`make format PATHS="release/scripts/startup/nodeitems_builtins.py source/creator/creator.c"`
A LIBDIR variable has been added to the GNUmakefile to simplify
references to this directory which can be one of 3 possible values.
Reviewed By: sybren, brecht
Ref D14789
Regression caused by [0] that caused the error message to be
created based on a normalized exception (which hid line numbers).
PyC_ExceptionBuffer{_Simple} & BPy_errors_to_report
no longer clears the exception.
This could have been resolved by changing python_script_error_jump
however that would involve changes to reference counting that are more
risky (noted in code-comment).
[0]: 2d2baeaf04
Leak was caused because output image buffer was initialized twice. Once
in speed effect strip and then by cross effect strip used for
interpolation feature.
This commit implements copying of materials and material indices from
all of the boolean node's input meshes. The materials are added to the
final mesh in the order that they appear when looking through the
materials of the input meshes in the same order of the multi-socket
input node.
All material remapping is done with mesh-level materials. Object-level
materials are not considered, since the meshes don't come from objects.
Merging all materials rather than just the materials on the first mesh
requires a change to the boolean-mesh conversion. This subtly changes
the behavior for object linked materials, but in a good way I think;
now the material remap arrays are respected no matter the number
of materials on the first mesh input.
Differential Revision: https://developer.blender.org/D14788
This was reported explicitly for originally being in face selectmode,
but could also crash when in vertex selectmode (when doing multiple
cuts).
The reason here is that `MESH_OT_loopcut` switches to edge select mode
(needed for `TRANSFORM_OT_edge_slide`, done in `ringsel_finish`), but was
only doing this on the active object's editmesh, all other participating
meshes would keep their selectmode which would now be out of sync with
both the active object's editmesh and scene settings for these.
This causes problems later in 'Select Linked'. Here, a mixture of
objects are used. First the viewcontext is set up with the active
object, then all participating objects are iterated (changing the
viewcontext to another object), then `unified_findnearest` would use that
changed viewcontext which would now contain the last object iterated. To
repeat: this could now have a different selectmode than the active
object which is later **again** used to get the nearest `BMElem` from in
`EDBM_elem_from_selectmode`. So in the failing case, we could get an
edge (but no face because of edge selectmode) from `unified_findnearest`,
`EDBM_elem_from_selectmode` would return NULL though (edge provided, but
in face selectmode), leading to the crash.
To solve this I assume it is best to change selectmode on all
participating meshes in multi-object editmode loopcut if necessary so
these are always in sync for following operations.
Alternatively, `Select Linked` (and probably lots more operators) would
have to be tweaked to pay closer attention which object is really used
to get selectmode from.
Note the selectmode is actually set back from edge selectmode in certain
cases (see `USE_LOOPSLIDE_HACK`), this patch changes that as well to act
on all participating meshes.
Maniphest Tasks: T95752
Differential Revision: https://developer.blender.org/D14791
This commit implements copying of materials and material indices from
all of the boolean node's input meshes. The materials are added to the
final mesh in the order that they appear when looking through the
materials of the input meshes in the same order of the multi-socket
input node.
All material remapping is done with mesh-level materials. Object-level
materials are not considered, since the meshes don't come from objects.
Merging all materials rather than just the materials on the first mesh
requires a change to the boolean-mesh conversion. This subtly changes
the behavior for object linked materials, but in a good way I think;
now the material remap arrays are respected no matter the number
of materials on the first mesh input.
Differential Revision: https://developer.blender.org/D14788
The thickness in the deform mode was just correct if the radius when
drawing a stroke was set to 20. Now all factors that influence the
stroke thickness are considered in deform mode.
Differential Revision: https://developer.blender.org/D14691
This is for some animation styles that usually copy and paste keyframes and they want avoid that both frames look equal, but they don't want noise randomness changes in the inbetween frames.
The patch adds a new random `Mode` option to select when the noise change.
Reviewed By: pepeland
Maniphest Tasks: T97099
Differential Revision: https://developer.blender.org/D14566
Now it's possible to use auto masking at 3 levels:
* Stroke
* Layer
* Material
The masking options can be combined and allows to limit the effect of the sculpt brush.
Diff Revision: https://developer.blender.org/D14589
Relinking code would weirdly enough allow clearing of extra/fake user
status on IDs used by affected ID, which would be utterly wrong.
Fairly unclear why this was working OK in reported case before rBa71a513def20,
could not spot any obvious reason just from reading code...
Also, in `libblock_remap_data_update_tags`, only transfer fake user
status if `new_id` is not NULL (otherwise that would have removed that
falg from `old_id`, without actually transferring it to anything).
This patch adds allows the user to select the initial fill color when
adding a new color attribute layer.
---
{F13035372}
Reviewed By: JulienKaspar, joeedh
Differential Revision: https://developer.blender.org/D14743
This was mostly noticable in the case of the Delete brush, when
clicking somewhere in empty space. It used the closest point on
a curve as brush position.
* BLENDER_VERSION_CYCLE set to beta
* Update pipeline_config.yaml to point to 3.2 branches and svn tags
* Update and uncomment BLENDER_VERSION in download.cmake
This commit introduce back support for all geometry types and all nodetree support.
Only the forward shading pipeline is implemented for now.
Vertex Displacement is automatically enabled for now.
Lighting & Shading is placeholder.
Related Task: T93220
# Conflicts:
# source/blender/draw/engines/eevee_next/eevee_engine.cc
# source/blender/gpu/CMakeLists.txt
This should have no functional changes.
This reduce the complexity of the shader by only supporting 2 colors.
We never use more than 2 color in practice and this makes usage not require
a UBO.
The old python importer had a "if do_transparency, set blend_method to
BLEND" type of logic. This bit was missing in the new importer; it was
only setting the eevee blend method when a transparency texture was
present, but not in other cases of transparency (as driven by MTL
"illum" mode).
Reviewd By: Howard Trickey
Differential Revision: https://developer.blender.org/D14783
Even if available OBJ/MTL format documentations don't explicitly specify
which characters can possibly separate keywords & arguments, turns out
some files out there in the wild use TAB character after the line
keywords. Which is something the new 3.2 importer was not quite
expecting (T97417).
Fix this by factoring out a utility function that checks if line starts
with a keyword followed by any whitespace, and using that across the
importer. Also fix some other "possible whitespace around name-like
parts" of obj/mtl parser as pointed out by the repro files in T97417.
Reviewed By: Howard Trickey
Differential Revision: https://developer.blender.org/D14782
- Fix default_value initialization of custom node tree interface:
This was crashing when adding a custom interface socket to a tree.
The node_socket_set_typeinfo function was called too early, creating a
default float socket, which then doesn't match the socket type after
changing to the custom type.
The node_socket_set_typeinfo only allocates and initializes
default_value when it isn't already set. That is because the function is
used either when creating new sockets or to initialize typeinfo after
loading files. So default_value has to be either null or has to be
matching the current type already.
- Fix RNA flag for string return value of the valid_socket_type callback:
String return values of registerable RNA functions need a
PROP_THICK_WRAP flag since they don't have a fixed buffer to write into.
This should have (mostly) no functional changes.
Support for clipping was added to the shaders but it is not enabled for now
as we wait for the Gpencil engine to support clipping.
Simple port.
Also a description of how each shader is used has been added.
NOTE: The shader created using `OVERLAY_shader_paint_vertcol` cannot be tested.
Apparently it is created but not used.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D14812
The Multiscatter GGX code was missing the same-side checks for incoming and
outgoing directions w.r.t. to shading and geometry normal.
Should not be needed for the Glass variant since it intentionally has both
reflection and transmission.
This allows object extras such as image-empties to be shown in the VR
viewport/headset display. Being able to see reference images in VR can
be useful for architectural walkthroughs and 3D modeling applications.
Since users may not want to see all object extras (lights, cameras,
etc.), per-object-type visibility settings are also added as session
options.
By slightly refactoring the definition of the 3D View object types
visibility panel (note: no functional changes), the VR Scene Inspection
add-on can show a similar panel without duplicating code. When VR
selection is possible in the future, the object type select options can
also be enabled.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D14220
A change proposed in T97697, using existing saturation as a multiplier for the filter operation
{F13038602}
Review By: Joseph Eagar, Julian Kaspar
Differential Revision: https://developer.blender.org/D14808
Ref D14808
Add "stageMetersPerUnit" render setting for USD files that have that set to
something other than the default (e.g. exported by Blender).
And fix a crash when an application creates a Hydra render pass on a thread
that does not have an OpenGL context current.
Long term, this should replace the XML format. This reuses the Hydra render
delegate implementation, and so supports the same features. The same command
line options and GUI work for both XML and USD also.
The implementation of this is still disabled, waiting for some refactoring of
USD library linking. However we want the Cycles code to be in sync between
repositories for the 3.2 release.
Ref T96731
* Leave code for building the render delegate against other applications and
their USD libraries to the Cycles repository, since this is not a great fit.
In the Blender repository, always use Blender's USD libraries now that they
include Hydra support.
* Hide non-USD symbols from the hdCycles shared library, to avoid library
version conflicts.
* Share Apple framework linking between the standalone app and plugin.
* Add cycles_hydra module, to be shared between the standalone app and plugin.
* Bring external libs code in sync with standalone repo, adding various missing
libraries.
* Move some cmake include directories to the top level cycles source folder
because we need to control their global order, to ensure we link against the
correct headers with mixed Blender libraries and external USD libraries.
In the current code we do not render any curves if they have not been
converted to meshes. This change makes the custom bone drawing try to
render mesh objects first and then falls back to curve objects if there
is no mesh data available.
Reviewed By: Clement
Differential Revision: http://developer.blender.org/D14804
While the reference would never be used in case of NULL pointer, this
bit of code was not really clear and nice, so make it less ambiguous
now. Also add early return in case a NULL idv pointeris actually passed.
While code deleting old (relocated to new ones) IDs would work fine in
typical cases, it would fail badly in others, when e.g. drivers would
create 'reversed' dependency from the obdata ID to the object ID.
This commit uses a less efficient, but much safer method. It also
ensures no relocated old IDs is left over in the file (previous version
could easily leave some old IDs from the old library until a full
save/reload cycle happened).
While relatively minor issue, it could become fairly annoying in a big
project, since once an ID is tagged as directly linked it tend to remain
as such.
Now also force indirect tagging when loading new IDs as part of a lib
relocation process, since the ones actually directly linked will be
tagged as such later on.
While this only had minor potential effect, both code incrementing
usercount of newly remapped IDs were wrong.
Original one would by-pass any 'ensured user' handling, newer one would
systematically make the ID directly linked...
`id_us_plus_no_lib` is to be used here.
Fact that those options are only used in a specific case, and that the
same behavior is ensured in a different part of the code in other cases,
is fairly confusing and unfortunate... At least document it.
This was caused by the compilation job being created suspended (to avoid
UI slowdown because of the material Preview Icons). The suspended job
wasn't passing the `WM_jobs_test` in `DRW_deferred_shader_remove` and
the material would still be in the compile queue with its status equal to
`GPU_MAT_QUEUED`. This would block the main thread in the waiting loop.
But since the job manager timer needs to execute in the main thread, the
compilation job was never being pushed out of its suspended state.
This lead to a complete lock situation.
The solution is to use `WM_jobs_customdata_from_type` which does exactly
what we need.
Also fixed a nullptr free.
* Float/double promotion warnings were mainly meant for avoiding slow
operatiosn in the kernel. Limit it to that to avoid hard to fix warnings
in Hydra.
* Const warnings in Hydra iterators.
* Unused variable warnings when building without glog.
* Wrong camera enum comparisons in assert.
* PASS_UNUSED is not a pass type, only for pass offsets.
There were two calls to access job's custom data. One of them
ignored job type, the other one ignored job owner.
Now there is a single function to access job's custom data.
If the job type or owner is not relevant NULL or WM_JOB_TYPE_ANY
can be passes explicitly.
Differential Revision: https://developer.blender.org/D14803
When pushing down an Action onto an NLA track, set the new Strip's
influence to the Action's influence. This is done by setting a key due
to the way the NLA Strip influence works (it's either animated, or
ignored).
Reviewed By: sybren, RiggingDojo
Differential Revision: https://developer.blender.org/D14719
For a single day in 2015 between rBff3d535bc2a6309 and rB945f32e66d6ada,
custom data structs could be written with an incorrect maxlayer field.
This means that custom data structs read from those files would think
they have more space to add new layers than they actually did, causing
a crash if more layers were added. This was found while investigating
a crash from D14365 which adds new face corner layers in versioning.
The fix is to reset all maxlayer integers to totlayer, which is
done when writing files in current Blender anyway.
The file tests/render/motion_blur/camera_zoom_blur_perspective.blend
has this problem as it was added on 2015-07-21, right between the two
commits. Adding three custom data layers in versioning code would crash.
The problem was originally found and investigated by Martijn Versteegh
(@Baardaap), thanks!
Differential Revision: https://developer.blender.org/D14786
Add the Discontinuity (Euler) Filter operator to the Dope Sheet->Key
menu, so it's not only available from the Graph Editor->Key menu. On
request of @pablico, see T95386.
This required changing a poll function which is used by a bunch of other
operators, which seemed scary at first, but my thinking is that if an
operator can execute in the Graph Editor, then it should also be able to
execute in the Dope Sheet. I think the only reason this wouldn't be true
is if we were storing animation data in the UI itself, which of course
we don't. So I hope this is okay.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D14015
Simple port with a few cosmetic changes:
- Attribute named "color" for indices VBO is now called "index"
- The indices VBO is now composed of `int`s instead of `uint`s (this simplifies the source)
Differential Revision: https://developer.blender.org/D14800
This patch has also been contributed upstream, so will not be needed anymore
soon. Also automatically clear cached variables for new nanovdb location in
libs.
NanoVDB is now bundled with OpenVDB (since rBb9c37608a9e) instead of a
separate package.
This still doesn't include our patch to support AMD HIP; that'll be
committed separately soon.
The bitwise XOR used to compute the delta (`changed`) might produce NaN and
thus produce undefined behavior when comparing to another float (because of
float promotion).
shader_builder had no manifest set, leading
to the classic common control version being
loaded which in turn caused an import error
and made the executable fail to initialize.
After rB47276b847017, for certain socket types such as object or
material, the name of the item is not obtained correctly leading
the tooltip to display random non-character memory values as text.
Differential Revision: https://developer.blender.org/D14762
When the object's position depends on the geometry and the geometry
depends on the object's position, we can't count on the object's
evaluated geometry to be available. Lattices and mesh objects have
equivalent checks in this vertex parenting function.
Differential Revision: https://developer.blender.org/D14781
Along with the port to createInfo this also:
- Packs constant uniforms in a UBO.
- Share enum declaration and unify names
- Makes codeflow easier to undestand.
- Split grid data to its own struct.
# Conflicts:
# source/blender/draw/engines/overlay/overlay_grid.c
For properties exposed to the geometry nodes modifier, decorators didn't
work at all for colors and it only worked on the X component of vectors.
The fix is to use -1 for the RNA index of the decorator button instead
of 1, which lets the UI code figure out what to do with arrays.
This patch modifies tooltips of attributes and UV maps to resolve
inconsistencies. It also restores the vertex color icon that went
missing from the UI lists when color attributes replaced vertex colors.
Fixes T97614
Differential Revision: https://developer.blender.org/D14768
Recent cleanups 9a8669ac81 and 1c790555a0
incorrectly interpereted the bitfield width syntax as a default
value. Also resolve two other compilation warnings.
Currently, the `eval` and `pdf` are not explicitly set to zero when a BSDF sample is invalid (e.g., below the upper hemisphere), when calling
`bsdf_sample` or `bsdf_eval`. It is assumed that `eval` and `pdf` are set to zero before these functions are called, which can cause problems if not.
This patch fixes this potential problem by explicitly setting `eval` and `pdf` to zero when the sampled direction is invalid.
I also added a sanity check if `eval` and `pdf` are valid (i.e., >= 0.f).
The check is activated when build in debug mode and with the `WITH_CYCLES_DEBUG` set to `ON`.
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D14776
When converting from XYZ to RGB it can happen, in some sky models, that the resulting RGB values are negative.
Atm, this is not considered and the returned values for the sky model can be negative.
This patch clamps the returned RGB values to be `= 0.f`
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D14777
Allow the session to save the choice for domain and data type since
it is highly likely that the user intends to use the same settings
for subsequent color attributes.
Use expanded button selectors for domain and data type since there
are only two options for each.
Differential Revision: https://developer.blender.org/D14785
A snap state can be replaced by another snap state of a gizmo or cursor.
The snap gizmo should only change its state, not the current state.
It's not really a problem currently.
D14686 added autopep8 which implicitly dragged in
toml and pycodestyle which were not versioned, this
diff adds explicit versions of these deps so there
won't be any version changes if we rebuild in the
future.
Reviewed By: brecht, sybren
Differential Revision: https://developer.blender.org/D14793
If the measure gizmo is enabled, its snap state is used in the snap update.
As it does not require a plane, the orientation of the plane is not
calculated.
However, the calculation of the plane's orientation must prevail over
the states.
`PXR_ENABLE_OSL_SUPPORT=OFF`: OpenShadingLanguage is an optional
dependency of the Imaging module. However, since that module was
included for its support for converting primitive shapes (sphere, cube,
etc.) to geometry, OSL is not necessary. Disabling it will make it
simpler to build Blender; currently only Cycles uses OSL.
`PXR_ENABLE_GL_SUPPORT=OFF`: GL support on Linux also links to X11
libraries. Enabling it would break headless or Wayland-only builds.
OpenGL support would be useful if someone wants to work on a Hydra
viewport in Blender; when that's actually being worked on, we could
patch in a new PXR_ENABLE_X11_SUPPORT option (to separate OpenGL from
X11) and contribute it upstream.
`PXR_BUILD_OPENIMAGEIO_PLUGIN=OFF`: It's used for loading image textures
in Hydra Storm / Embree renderers which we don't use.
Reviewed By: LazyDodo, brecht, makowalski
Differential Revision: https://developer.blender.org/D14792
Split 'ED_view3d_cursor_snap_data_get' into 'update' and 'get' functions
Sometimes we just want to update and sometimes we just get the result.
Make it clear.
When height is limited, it is defined by space occupied by strips,
but at least channels 1 to 7 will be always visible. This allows it to
easily overview timeline content by zooming out to maximum extent in Y
axis and panning in X axis.
More channels can be "created" on demand by moving strip to higher
channel. When strip is removed and highest channel becomes empty, view
will stay as is until it is moved down. Then new highest point is
remembered and it is not possible to pan upwards until strip is moved to
higher channel.
Limiting takes into account height of scrubbing and markers area as
well as scrollers. This means that when zoomed out to maximum extent,
no strips are obstructed by fixed UI element.
Fixes T57976
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D14263
This complex comment was hard to parse visually.
There was some odd line breaking going on, and together with no
indentation for the continued lines, it was just a blob of text with no
visual structure. You wouldn't see easily where the description of an
argument started or ended.
Geometry node group inputs and outputs get a new property that controls
the attribute name used for that field input/output when assigning the
node group to a modifier for the first time. If the default name is assigned
to an input, the default "Use attribute name" is true .
In order to properly detect when a node group is first assigned,
the modifier now clears its properties when clearing the node group.
Ref T96707
Differential Revision: https://developer.blender.org/D14761
This patch adds the drag and drop strip previews in the VSE.
It also adds two new functions to the drag and drop API.
1. "draw_in_view" for callbacks that wants to draw elements in local viewport coordinates
2. "on_drag_start" that can be used for prefetching data only once at the start of the drag.
Reviewed By: Julian, Campbell
Differential Revision: http://developer.blender.org/D14560
When using an offset modifier on a grease pencil object, the performance
could be impacted due to the randomize option introduced by rB6a2bc40e0131.
Even if the option was not used (offset, rotation, scale set to zero), the modifier
would still compute the random transformation matrix.
The patch checks if the randomization is used and only then caluclates the matrix.
Reviewed By: #grease_pencil, antoniov
Differential Revision: https://developer.blender.org/D14553
As the default handle type in Blender is 'Auto Clamped' the Equalize
Handles operator will often appear to have no affect on the selected
keyframes on which it is run. If either of the keyframes' handle types
are 'Auto', 'Auto Clamped', or 'Vector', this patch will convert the
handles to 'Aligned'.
Reviewed By: sybren
Maniphest Tasks: T96476
Differential Revision: https://developer.blender.org/D14345
Since rBfa43c47c7cb8446b632a4c0f712162ba615fe51f the progress bar do not
show the compilation progress. This was misleading as users could think
it could be canceled or prevent rendering.
Now we just show how many shaders are still in the compilation queue inside
each viewport. This number is more accurate than the percentage that was
previously displayed in the progress bar.
This uses refcounter instead of double thread mutexes. This should be
more robust and avoir use after free situation.
Also remove redundant structures and the use of scene as the job owner.
Removal of the `WM_redraw_windows` call in `wm_file_write` introduced
in rB7a9cfd08a8d7415ff004809cf62570be9152273e as that can cause
crashing while saving from a script.
See D14780 for more details.
Differential Revision: https://developer.blender.org/D14780
Reviewed by Campbell Barton
At least on the Mac, `std::sort` sometimes passes the same value in the
`a` and `b` parameters.
The `true` return is only for cases where `a` is less than `b`.
This is to avoid use after free when the `GPUPass` gets compiled after the
original `GPUMaterial` used to create it was freed.
The issue was introduced by rBfa3bd17ae873
The subdivision is always recomputed on the CPU when displaying stats
if the mesh is animated which leads to bad performance.
This caches the subdivision topology counters from the draw code in the
mesh runtime and uses them for the viewport statistics.
Differential Revision: https://developer.blender.org/D14774
The crash is caused as the subdivision wrapper does not have loop
normals, which are generally computed at the end of the modifier stack
evaluation via `mesh_calc_modifier_final_normals`. (Note that they are
initially computed, but deleted by the subdivision wrapper creation.)
This records in the mesh runtime whether loop normals should have been
computed and computes them alongside the subdivision wrapper.
Differential Revision: https://developer.blender.org/D14489
There are a number of shaders, most notably grid_frag.glsl, which rely on default assignments to uniform values within shaders. This is not currently supported by the shader uniform push model implemented for the Metal backend, wherein uniform updates are pushed as a singular block of data. Any default assignment would become over-written.
As such, adding assignments of these default values in the high-level, to ensure the correct value is written for all APIs. This likely impacts Vulkan push-constants as well.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D14555
This covers implementation of the GPUTexture abstraction for the Metal backend, with additional utility functionality as required.
Some components have been temporarily disabled pending dependencies on upcoming Metal backend components, and these will be addressed as the backend is fleshed out.
One core challenge addressed in the Metal backend is the requirement for read/update routines for textures. MTLBlitCommandEncoders offer a limited range of the full functionality provided by OpenGLs texture update and read functions such that a series of compute kernels have been implemented to provide advanced functionality such as data format conversion and partial/swizzled component updates.
This diff is provided in full, but if further division is required for purposes of code review, this can be done.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D14543
When more than one, consecutive, subdivision modifier is used on a Mesh,
the last subsurf modifier is used for GPU subdivision even though it
might be disabled. This is because retrieving the last subsurf modifier
in the draw code did not check whether the modifier was disabled or not.
To fix this, the session UUID of the modifier which delegated evaluation
to the GPU code is cached and used in the draw to select the right subsurf
modifier.
Differential Revision: https://developer.blender.org/D14488
This is a stripped down version of D14645 without the scene specialisation optimisations.
The two major changes in this patch are:
- Enables more aggressive inlining on Apple Silicon resulting in a 1.1x speedup and 10% reduction in spill, at the cost of longer pipeline build times
- Revival of shader binary archives through a new ShaderCache which is shared between MetalDevice instances using the same physical MTLDevice. This mitigates the extra compile times via explicit caching (rather than, as before, relying on the implicit system shader cache which can be purged without notice)
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D14763
Adds a column to the right in the Library Overrides Hierarchies view
mode to toggle editability of library overrides.
Note that making a library override non-editable currently involves
clearing all overridden properties. This is an arguable design choice,
we should probably at least warn the user before doing this.
Part of T95802.
Reviewed by: Bastien Montagne
Differential Revision: https://developer.blender.org/D14653
The code to compare buttons from the previous to the current frame, to
see if they match (an thus should keep the same state) was quite
generic, and didn't allow much flexibility/customization. For some
cases this isn't enough, and a more specific comparison is needed. Say
if some buttons don't actually store comparable data themselves, only
via the button context. This was the case in D14653.
It was possible to set context pointers for buttons via the layout, but
not for buttons in places where the layout system wasn't used (where
buttons are placed manually). This is needed for buttons in the
Outliner, see D14653.
/maxcpucount:1 and /m are the same option with the latter
one using all cores available, leading to the situation
where msbuild would start N side by side project builds
that all tried to use N cores as well. leading to severe
memory and compute starvation during the deps build.
Goals:
* Better high level control over where devirtualization occurs. There is always
a trade-off between performance and compile-time/binary-size.
* Simplify using array devirtualization.
* Better performance for cases where devirtualization wasn't used before.
Many geometry nodes accept fields as inputs. Internally, that means that the
execution functions have to accept so called "virtual arrays" as inputs. Those
can be e.g. actual arrays, just single values, or lazily computed arrays.
Due to these different possible virtual arrays implementations, access to
individual elements is slower than it would be if everything was just a normal
array (access does through a virtual function call). For more complex execution
functions, this overhead does not matter, but for small functions (like a simple
addition) it very much does. The virtual function call also prevents the compiler
from doing some optimizations (e.g. loop unrolling and inserting simd instructions).
The solution is to "devirtualize" the virtual arrays for small functions where the
overhead is measurable. Essentially, the function is generated many times with
different array types as input. Then there is a run-time dispatch that calls the
best implementation. We have been doing devirtualization in e.g. math nodes
for a long time already. This patch just generalizes the concept and makes it
easier to control. It also makes it easier to investigate the different trade-offs
when it comes to devirtualization.
Nodes that we've optimized using devirtualization before didn't get a speedup.
However, a couple of nodes are using devirtualization now, that didn't before.
Those got a 2-4x speedup in common cases.
* Map Range
* Random Value
* Switch
* Combine XYZ
Differential Revision: https://developer.blender.org/D14628
The new name is `Internal Dependencies`.
* Is more inline with the general goal of the panel.
* Can also show which external objects are used in the node tree in the future.
This name was choosen in the geometry nodes submodule meeting (2022-04-25).
Differential Revision: https://developer.blender.org/D14752
This macro allows defining a default argument for when the translation
unit is compiled in C++. Otherwise (in C), the argument has to be passed
explicitly.
A couple of benefits:
* Default arguments are a nice quality-of-life feature in C++. It's
annoying if these can't be used in C++ files, just because the header
with the function declaration still needs to be C compatible.
* Adds useful information to the API declaration. E.g. that an argument
can be nullptr.
* Should help us to move to using default arguments more, helping
readability (arguably)
Used in D14653.
Reviewed By: LazyDodo
Differential Revision: https://developer.blender.org/D14654
This commit adds support for the curves object to the apply modifier
operator. A warning is added when the evaluated result of the modifier
doesn't contain any curves data.
Differential Revision: https://developer.blender.org/D14730
Motion paths can now be initialised to more sensible frame ranges,
rather than simply 1-250:
- Scene Frame Range
- Selected Keyframes
- All Keyframes
Reviewed By: sybren, looch, dfelinto, pablico
Maniphest Tasks: T93047
Differential Revision: https://developer.blender.org/D13687
Add missing check as the context override dict may have been copied
since it was assigned, also initialize the context manager with
PyType_Ready, while it didn't cause any errors - it's expected
that all types are initialized.
Aggressive needs to be enabled for many useful edits to take effect,
the ignore list is currently used to disable edits that may need
further checks/investigation before they're enabled.
Note that aggressive was already enabled for the:
source/tools/utils/autopep8_clean.py script which was previously used
when applying autopep8.
Failure to clip automatic-names meant named could end with a "." for e.g.
Error in [0] meant the clipped text was copied then
immediately overwritten.
[0]: 354e6b9c18
- De-duplicate txt_new_linen & txt_new_line.
- Don't accept NULL as input for txt_new_linen & txt_new_line
(callers can pass in an empty string instead).
- Avoid duplicate strlen calls in txt_new_linen.
- Use memcpy when the length of the string is known in txt_delete_sel &
BKE_text_load_ex.
`attribute_try_create` didn't understand that the vertex group
attribute already existed because it only looks for names in custom
data layers when the domain matches. Using `attribute_exists`
unfortunately requires another loop through all attribute names,
but that should be optimized separately in the future anyway.
Differential Revision: https://developer.blender.org/D14756
Added a fallback path to compute the
cursor radius for when the stroke
starts over a blank area of space
(in which case SCULPT_cursor_geometry_update
fails).
This commit makes the `MeshVertex.normal` property read-only.
In practice it already was, since the value could be overwritten at any
time if code requests updated normals, so this just clarifies that
position and avoids misleading users.
Differential Revision: https://developer.blender.org/D14696
auto-iteration property in mask filter
Note: Auto-iteration is still set manually
for increase/decrease contrast. These should
probably become their own operators.
by showing redo panel.
The A hotkey has "auto iteration" enabled by default,
which calculates the number of times to run the filter
using a heuristic based on vertex count.
To make clear to the user what is going on the redo
panel is now shown for the mask filter operator.
NOTE: I discovered the source of the bug where sculpt
operators' redo panels were greyed out. The name
fed to SCULPT_undo_push_begin must match the operator
name. I've added a comment in sculpt_intern explaining
this.
Remembering the number of curves of every type makes it fast to know
whether processing specific to a single curve type has to be done.
This information was accessed in quite a few places, so this should be
an overall reduction in overhead for the new curves type.
The cache is computed eagerly, in other words every time after changing
the curve types. In order to reduce verbosity I added helper functions
for some common ways to set the types.
Differential Revision: https://developer.blender.org/D14732
Changes:
- Remove `BLI_memarena` (Use `MEM_cnew` and `MEM_delete` to allocate cached data)
- Implement `snap_object_data_mesh_free_ensure` and `snap_object_data_editmesh_free_ensure` and skip need to get original key Object for editmesh data
- Use `BMEditMesh` as key for editmesh `Ghash`
- Make a better distinction between `SnapObjectData`s. (`SnapData_Mesh` and `SnapData_EditMesh`)
The editing data of a `SURF`s is similar to that of Curves and should be supported for snapping.
But unlike Curve objects, for snapping, only support the nurb points if the object is in edit mode.
This matches the solution for Meshes and avoids having to create a kind
of "boundbox" for the SURF nurb points.
* Adjust width based on node width, necessary to make the longer name below work.
* Show "X Named Attributes" in the overlay.
* Use "Accessed named attributes" in the tooltip.
Differential Revision: https://developer.blender.org/D14751
* If removing an attribute failed (even though it exists), don't log it as being used.
* Make warning message a bit more informative.
Differential Revision: https://developer.blender.org/D14750
View moves faster with two active directions.
This is probably because `dvec` is not normalized when moving in two directions.
Normalizing this direction vector will fix the problem.
Differential Revision: https://developer.blender.org/D14729
Since cbf033c055 the `matte_id` will be allocated in the node
storage for the forward compatibility purposes. However, this
field was never freed, leading to memory leak.
Causes annoying popup on macOS when running Cycles tests,
for example render_passes_cryptomatte_asset.blend
Differential Revision: https://developer.blender.org/D14728
Add Bake Action to the NLA edit menu to aid discoverablity and allow
people to understand that Bake Action is part of working with the NLA.
Part of the NLA road map improvement project for the Animation Module.
This was a community request to add access to the Bake without needing
to turn on developer tools in the preferences and then use search in the
NLA for bake.
It seems this was always intended, as the operator is called `nla.bake`.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D14575
- Add missing doxy-section for Apply Parent Inverse Operator
- Use identity for None comparison in Python.
- Remove newline from operator doc-strings.
- Use '*' prefix multi-line C comment blocks.
- Separate filenames from doc-strings.
- Remove break after return.
While the ability to run `autopep8 .` to format Blender's Python code
is handy, the settings to perform this can conflict with other uses
of autopep8 (which editors may use to auto-format on save).
Some arguments now need to be passed in, e.g:
autopep8 . --in-place --recursive --jobs=0
We'll likely include this in `make format` convenience target so the
details for invoking autopep8 shouldn't be an issue in the long term.
The current code for computing tangents is not exactly fast.
This has been a long-standing issue, and recently came up again with T97378.
The main bottleneck is fetching the mesh data, since it's handled through a callback system and each vertex might have its data queried dozens of times.
I've tried a lot of things to optimize `mikktspace.c`, but unfortunately most weren't that useful:
- Vectorizing SVec3 gives a ~5% speedup, but I'm not sure if the additional ~70 lines of code are worth it
- Keeping an internal copy of the data instead of re-querying all the time helps a lot (~50-60% time reduction), but requires a lot of extra memory (~100 byte per face)
- Going C++ and replacing the internal quicksort with std::sort shows no difference
- Restructuring the entire file to be a header-only library so that the callbacks can be inlined gives ~10% reduction, but is a major change and deviation from the original library
In the end, two simple fixes that actually help remain:
- Don't re-query the number of faces in each loop iteration
- Don't bother looking for identical vertices if there's only one vertex with that hash
With this, time for the test case in T97378 goes from 6.64sec to 4.92sec. It's something I guess.
I feel like completely refactoring this library would not be a bad idea at some point, but for now it does the job...
Differential Revision: https://developer.blender.org/D14675
The uv fix just submitted had a bug where I forgot to wrap around
after adding 1. This apparently worked anyway in a debug build
but not in release build, hence the buildbot tests were failing.
Works for both Cycles and multires bake. Triangles are baked to multiple
UDIM images if they span across them, though such UV layouts are generally
discouraged as there is no filtering across UDIM tiles.
The bake margin currently only works within UDIM tiles. For the extend method
this is logical, for the adjacent faces method it may be useful to support
copying pixels from other UDIM tiles, though this seems somewhat complicated.
Fixes T95190
Ref T72390
Remove need for shadow caustic caster geometry to have a UV layout. UVs were
useful to maintain a consistent tangent frame across the surface while
performing the walk. A consistent tangent frame is necessary for rough
surfaces where a normal offset encodes the sampled h, which should point
towards the same direction across the mesh.
In order to get a continuous surface parametrization without UVs, the
technique described in this paper was implemented:
"The Natural-Constraint Representation of the Path Space for Efficient
Light Transport Simulation" (Supplementary Material), SIGGRAPH 2014.
In addition to implementing this feature:
* Shadow caustic casters without smooth normals are now ignored (triggered
some refactoring and cleaning).
* Hit point calculation was refactored using existing utils functions,
simplifying the code.
* The max number of solver iterations was reduced to 32, a solution is
usually found by then.
* Added generalized geometry term clamping (transfer matrix calculation can
sometimes get unstable).
* Add stop condition to Newton solver for more consistent CPU and GPU result.
* Add support for multi scatter GGX refraction.
Fixes T96990, T96991
Ref T94120
Differential Revision: https://developer.blender.org/D14623
This is fairly tricky to perform, since there is often very limited
contextual information available about the 'active' hierarchy to
override.
This commit is a first step, it is expected to handle decently well
cases like objects and obdata (recreating necessary object and
collection hierarchy, and/or hooking it to a potential existing
hierarchy), at least in most common cases.
Ref: {T95707}.
Extends the changes started in f31c3f8114 to completely separate
much of the DRW curves code from the particle hair drawing. In the short
term this increases duplication, but the idea is to simplify development
by making it easier to do larger changes to the new code, and the new
system will replace the particle hair at some point.
After this, only the shaders themselves are shared.
Differential Revision: https://developer.blender.org/D14699
Add macros to get/set boolean attributes, to set float2/float3
attributes and to get float2/float3 attributes via pointer access.
Needed for D14365 and further generic attribute integration.
Differential Revision: https://developer.blender.org/D14708
This substantially redoes the logic by which bevel chooses, for
the middle segment when there are an odd number of segments,
which face to interpolate in, and which vertices to snap to which
edges before doing that interpolation. It changes the UV layouts
of a number of the regression tests, for the better.
An example, in the reference bug, is a cube with all seams, unwrapped
and then packed with some margin around them, now looks much
better in UV space when there are an odd number of segments.
The original mistake I made in b9febb54a4 was thinking
that the input curve object data to `BKE_displist_make_curveTypes`
was already copied from the original. I think I misread some of its
`ID` flags. This commit places the result of curves evaluation in a
duplicated curve instead, and copies the edit mode pointers
necessary for drawing overlays. `Curve` needs to know not to
free those pointers.
I still don't have a full understanding of why some of the tactics I've
used work and others don't. I've probably tried around 8 different
solutions at this point, and this is the best I came up with.
The dependency graph seems to have some handling of edit mode
pointers that make the edit mode overlays work if the evaluated
result is only an empty curve created by the evaluated geometry set.
This doesn't work with the current method and I need to set the
edit mode pointers at the end of evaluation explicitly.
We're constrained by the confusing duality of the old curves system
combined with the new design using the evaluated geometry set.
Older areas of Blender expect the evaluated `Curve` to be a copy
of the original, even if it was replaced by some arbitrary evaluated mesh.
Differential Revision: https://developer.blender.org/D14561
Added some regex magic in i18n py module to also extract UI names from
all of our units definitions.
Those enum values are fully dynamically generated, so they cannot be
extracted from RNA introspection.
Caused by {rBcfa53e0fbeed}
Above commit mixed up source and destination meshes causing bad lookups
on calculated normals.
Now make sure we get normals from our destination mesh to project along.
Note this was only reported for Projected Face Interpolated mode, but
same was true for Projected Edge Interpolated mode (though that one is a
bit weird to test since I think there is generally something wrong with
that mode -- with or without rBcfa53e0fbeed).
Fixes T97528
Maniphest Tasks: T97528
Differential Revision: https://developer.blender.org/D14726
When in mesh editmode, attributes point to bmesh customdata, the
attribute data is empty since custom data is stored per element instead
of a single array there (same es UVs etc.).
Opposed to e.g. UVs, general attributes were not setting their data
length/size to zero in case of editmode though, which could lead to
- crash in Outliner Data Api view [that was reported in T95922]
- RuntimeError such as the following:
```
RuntimeError: bpy_prop_collection[index]: internal error, valid index 0
given in 8 sized collection, but value not found
```
Now check for mesh editmode in `BKE_id_attribute_data_length` (and
return zero in that case).
Alternatively, the check could also be done in
`rna_Attribute_data_length` only (such as UVs do in
`rna_MeshUVLoopLayer_data_length`).
Ref D11998
Fixes T95922
Maniphest Tasks: T95922
Differential Revision: https://developer.blender.org/D14714
Regression in 4d0f846b93,
passing selection through to drag relied on tweak events running
even when the press event was handled which is not the case for drag.
Fix for T84962
Before the patch, edit voxel size always displayed voxel size without units, just as a number in meters.
Now it changes like in the voxel remesh panel and shows correct units
Video:
{F13009428}
In adaptive mode:
{F13009435}
Reviewed By: JulienKaspar
Maniphest Tasks: T84962
Differential Revision: https://developer.blender.org/D14682
This adds pyproject.toml, needed to configure defaults for autopep8.
The file is auto-discovered in a similar way to .clang-format, other
tools could be configured here too. For now just configure autopep8 so
this can be enabled in IDE's without causing unexpected edits such as
wrapping lines over 80 columns in width.
Now autopep8 can be used from the root directory by running: autopep8 .
This uses multiple-jobs to run autopep8 over all Python scripts except
paths that are explicitly ignored in exclude defined by pyproject.toml.
Reviewed By: mont29, brecht, sybren
Ref D14686
This enables building of HIP binaries for AMD RDNA and RDNA2 GPUs.
This requires the 22.10 / ROCm 5.1 driver.
Ref T91571
Differential Revision: https://developer.blender.org/D14360
If the attribute already existed, but had a different domain or data type
than the user tried to write to it with (i.e. writing to `position` with
a float), then the data from field evaluation wasn't freed.
This restructures the geometry nodes modifier attribute writing process
to solve that problem and remove some of the nested if statements
that made the process confusing.
One case that still doesn't work is writing to a builtin attribute from
a different domain. If `OutputAttribute` gets that feature then that
could be supported here too.
Differential Revision: https://developer.blender.org/D14706
The problem is old.
rB52be06301257 (fixed by rB4b35d6950d4f) just masked it.
`Object->data`, on evaluated objects, is not a safe pointer to get
objects with the same `BMEditData`.
Use `Object->runtime.data_orig` instead.
As `GPU_PRIM_LINE_LOOP` is not supported on Vulkan or Metal and
`GPU_PRIM_TRI_FAN` is not supported on Metal, they will be removed in
future releases.
So it is important to inform users that they are obsolete and may not
be supported for a long time.
Release Notes: https://wiki.blender.org/wiki/Reference/Release_Notes/3.2/Python_API
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D14679
Property collection functions were not really in sync which could result
in crashes in UI_LISTS.
The reason is that attributes of type color defined on domains other than
Points or Corners are still valid, but should really be skipped for the
special "color_attributes".
`rna_AttributeGroup_color_length` itself was fine here, it skips these,
but the iterator (`rna_AttributeGroup_color_iterator_begin` /
`rna_Attributes_noncolor_layer_skip`) wasnt, so when a UI_LIST
filter_items() would iterate the collection it would actually get
results were it shouldnt.
Now check a suiting domain in `rna_Attributes_noncolor_layer_skip` as
well.
Maniphest Tasks: T97502
Differential Revision: https://developer.blender.org/D14717
Since {rBeae36be372a6b16ee3e76eff0485a47da4f3c230} the distinction
between float and byte colors is more explicit in the ui. So far, geometry
nodes couldn't really deal with byte colors in general. This patch fixes that.
There is still only one color socket, which contains float colors. Conversion
to and from byte colors is done when read from or writing to attributes.
* Support writing to byte color attributes in Store Named Attribute node.
* Support converting to/from byte color in attribute conversion operator.
* Support propagating byte color attributes.
* Add all the implicit conversions from byte colors to the other types.
* Display byte colors as integers in spreadsheet.
Differential Revision: https://developer.blender.org/D14705
This adds a new subpanel to the geometry nodes modifier which is just
used to display information about used attributes.
* A new panel is used because adding this information anywhere else
clutters the ui too much imo.
* The general layout is similar to that in the tooltip. I found it to be more
trouble than it's worth to share this code.
Possible future improvements:
* Don't show the panel if there are no used named attributes.
* Add some heuristics to determine which named attributes the user does
not have to care about because they are only used in the node group
and don't affect anything else.
Differential Revision: https://developer.blender.org/D14701
Very easy fix, the bug seemed to be a result of a typo on the right-most margin.
Old: {F13013777}
New: {F13013782}
Maniphest Tasks: T97497
Differential Revision: https://developer.blender.org/D14711
This was projecting the unnormalized z scale axis onto the plane defined
by the view vector. If object scale was very small, this made the empty
still visible at viewing angles far from the object axis.
Now use the normalized z scale axis to make this work the same at all
object scales.
Fixes T97004.
Maniphest Tasks: T97004
Differential Revision: https://developer.blender.org/D14557
This was possible with the gizmo, but no using the operator (e.g. from
the sidebar).
Now store original offsets and reset to these on calcel (ESC or RMB).
Maniphest Tasks: T97465
Differential Revision: https://developer.blender.org/D14704
Text inserted via TEXT_OT_insert would always have auto-close
logic applies which interfered any insertion of literal strings
containing brackets.
Now auto-closing brackets is restricted to characters read from
events from the operators invoke functions.
Sculpt paint tools now pop up an error message if
dynamic topology or multires are enabled.
Implementation notes:
* SCULPT_vertex_colors_poll is now a static function in sculpt_ops.c.
It is now used solely by the legacy color attribute conversion
operators (SCULPT_OT_vertex_to_loop_colors and SCULPT_OT_loop_to_vertex_colors)
and should be deleted when they are.
* There is a new method, SCULPT_handles_colors_report, that returns true if
the sculpt session can handle color attributes; otherwise it returns false
and displays an error message to the user.
- Verrtex paint mode has been refactored into C++ templates.
It now works with both byte and float colors and point
& corner attribute domains.
- There is a new API for mixing colors (also based
on C++ templates). Unlike the existing APIs byte
and float colors are interpolated identically.
Interpolation does happen in a squared rgb space,
this may be changed in the future.
- Vertex paint now uses the sculpt undo system.
Reviewed By: Brecht Van Lommel.
Differential Revision: https://developer.blender.org/D14179
Ref D14179
Python 3.10 has added "soft keywords" [0] to their list of identifiers.
This patch adds these soft keywords to the list of builtin functions
that the text editor searches for when highlighting Python code.
The only soft keywords that Python 3.10 current has are: `match`,
`case`, and `_`, but more will likely be added in future versions.
Currently, the `_` soft keyword is ignored from highlighting. It is a
wildcard matching pattern when used with `case` (similar to `default`
for `switch`es in C/C++), but `_` is far more often used in other
contexts where highlighting the `_` might seem strange. For example,
ignoring elements when unpacking tuples (`_, g, _, a = color`).
This patch also updates the commented Python code for creating the list
of keywords, for convenience.
Before:
{F13012878}
After:
{F13012880}
Example from PEP-636 [1]
Note: These soft keywords are only reserved under specific contexts.
However, in order for the text editor to know when the keywords are used
in the appropriate contexts, the text editor would need a full-blown
Python grammar [2] parser. So, for now, these keywords are simply added
in along with the other keywords in order to highlight them in the text
editor.
[0]: https://docs.python.org/3/reference/lexical_analysis.html#soft-keywords
[1]: https://peps.python.org/pep-0636/#matching-specific-values
[2]: https://docs.python.org/3/reference/grammar.html
Ref D14707
Currently the "exclude" option for autopep8 isn't as reliable as it
should be since passing in absolute paths to autopep8 causes
the paths not to match. See: D14686 for details.
So explicitly disable autopep8 in this generated file (the generator
has already been updated).
Also use spaces for indentation otherwise autopep8 re-indents them.
This seems like a bug in autopep8 since it's changing lines with
autopep8 disabled. Use a workaround instead of looking into a fix since
it's simpler for all our Python files to use spaces instead of tabs and
there isn't much benefit mixing indentation for scripts.
Sometimes, when moving strip with 2 input effect attached and causing
strip overlap, this overlap is resolved incorrectly - too big offset
is applied. This is because effects are not taken into consideration
when "shuffeling" to resolve overlap.
To fix usual cases (transitions), overlap between strip and it's effect
is considered to be impossible.
There are edge cases, but these would be much more complicated to
implement and could have negative impact on performance.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D14578
Crash was caused by incorrectly assuming, that rendered strip is meta
when editing code in bulk, but this wasn't true and strip had no
channels initialized, which caused crash on NULL dereference.
Correct approach is to find list of channels where on same level as
rendered strip, similar to how `SEQ_get_seqbase_by_seq` function works
for list of strips.
This reverts commit 390b9f1305. It seems to
break things on Linux for unknown reasons, so leave it out for now. A solution
to this will be required for Vega cards though.
There is not much point in having those editable in overrides, and since
those are pointers, their value always differs from ref linked ID vs.
local override one, generating 'noise' in Outliner's override property
view.
Building against the existing 3.1 libraries should continue to work, until
the precompiled libraries are committed for all platforms.
* Enable WebP by default.
* Update Windows for new library file names.
* Automatically clear outdated CMake cache variables when upgrading to new
libraries.
* Fix static library linking order issues on Linux for OpenEXR and OpenVDB.
Implemented by Ray Molenkamp, Sybren Stüvel and Brecht Van Lommel.
Ref T95206
The "PROP" in the name reflects its generic status, and removing
"LOOP" makes sense because it is no longer associated with just
mesh face corners. In general the goal is to remove extra semantic
meaning from the custom data types.
For some reason, the rework of liboverride handling of Collection items
insertion (rB33c5e7bcd5e5) completely missed to update accordingly the
default liboverride apply code...
Many thanks to Wayde Moss (@GuiltyGhost) for the investigation and
proposed solution.
This was caused by the use of a reserved keyword macro that is not
directly used but causes an error on some compiler.
Change the occurences to not match the macros.
This file was skipped by source/tools/utils/autopep8_clean.py
since it doesn't have a .py extension, running the autopep8 tool
recursively detects Python scripts without extensions.
- Increase the stack level so the reported line number references
script authors code (not Blender's wrapper function).
- Include the operator name and poll/call usage in the warning.
Support a way to temporarily override the context from Python.
- Added method `Context.temp_override` context manager.
- Special support for windowing variables "window", "area" and "region",
other context members such as "active_object".
- Nesting context overrides is supported.
- Previous windowing members are restored when the context exists unless
they have been removed.
- Overriding context members by passing a dictionary into operators in
`bpy.ops` has been deprecated and warns when used.
This allows the window in a newly loaded file to be used, see: T92464
Reviewed by: mont29
Ref D13126
These functions can be used with PyArg_ParseTupleAndKeywords
(and related functions) to take typed RNA arguments without
having to extract and type-check them separately.
No functional changes, extracted from D13126.
There's a small typo in the tool tip for applying the Parent Inverse. This patch fixes that typo
old:
{F13010751}
new:
{F13010749}
Reviewed By: Blendify
Maniphest Tasks: T97437
Differential Revision: https://developer.blender.org/D14693
This is mostly a cleanup to avoid hardcoding the eager calculation of
normals it isn't necessary, by reducing calls to `BKE_mesh_calc_normals`
and by removing calls to `BKE_mesh_normals_tag_dirty` when the mesh
is newly created and already has dirty normals anyway. This reduces
boilerplate code and makes the "dirty by default" state more clear.
Any regressions from this commit should be easy to fix, though the
lazy calculation is solid enough that none are expected.
This adds support for rendering motion blur for volumes, using their
velocity field. This works for fluid simulations and imported VDB
volumes. For the latter, the name of the velocity field can be set per
volume object, with automatic detection of velocity fields that are
split into 3 scalar grids.
A new parameter is also added to scale velocity for more artistic control.
Like for Alembic and USD caches, a parameter to set the unit of time in
which the velocity vectors are expressed is also added. For Blender gas
simulations, the velocity unit should always be in seconds, so this is
only exposed for volume objects which may come from external OpenVDB
files.
These parameters are available under the `Render` panels for the fluid
domain and the volume object data properties respectively.
Credits: kernel advection code from Tangent Animation's Blackbird based
on earlier work by Geraldine Chua
Differential Revision: https://developer.blender.org/D14629
The fix ensures that the reference count for `IShellItem *pSI` is decremented,
preventing a memory leak. For `IFileOperation *pfo` the decrement of the
reference count is only attempted when `CoCreateInstance` is successful.
Additionally, the gotos have been replaced with nested if/else statements.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D14681
Since shader sources are now parsed on demand via `GPUShaderCreateInfo`,
sources are not available to be read via
`GPU_shader_get_builtin_shader_code`.
Currently this results in a crash as the code tries to read `NULL`
pointers.
`GPU_shader_get_builtin_shader_code` was created with the intention of
informing the user how a builtin shader works, thus "replacing"
detailed documentation.
Therefore this function doesn't really have a practical use in an addon.
So, instead of updating the function (which would require several
changes to the gpu module), remove it and improve the documentation.
Release Notes: https://wiki.blender.org/wiki/Reference/Release_Notes/3.2/Python_API#Breaking_Changes
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D14678
Noted as part of T94775 investigation by Wayde Moss (@GuiltyGhost),
thanks!
NOTE: this mistake probably did not have any pratical impact in current
code, at least for overrides.
This is to make the codegen and shading nodes object type agnostic. This
is essential for flexibility of the engine to use the nodetree as it see
fits.
The essential volume attributes struct properties are moved to the
`GPUMaterialAttribute` which see its final input name set on creation.
The binding process is centralized into `draw_volume.cc` to avoid
duplicating the code between multiple engines. It mimics the hair attributes
process.
Volume object grid transforms and other per object uniforms are packed into
one UBO per object. The grid transform is now based on object which simplify
the matrix preparations.
This also gets rid of the double transforms and use object info orco factors
for volume objects.
Tagging @brecht because he did the initial implementation of Volume Grids.
Noticed while looking into oneAPI patch.
Seems to be unused, without clear indication why/when it might be
needed. Removing the function simplifies adding the new backend.
Differential Revision: https://developer.blender.org/D14652
Continuing the refactors described in T93602, this commit moves
the face dot tag set by the subdivision surface modifier out of
`MVert` to `MeshRuntime`. This clarifies its status as runtime data
and allows further refactoring of mesh positions in the future.
Before, `BKE_modifiers_uses_subsurf_facedots` was used to check
whether subsurf face dots should be drawn, but now we can just check
if the tags exist on the mesh. Modifiers that create new new geometry
or modify topology will already remove the array by clearing mesh
runtime data.
Differential Revision: https://developer.blender.org/D14680
The following methods weren't included in API docs.
- BlendDataLibraries.load
- BlendDataLibraries.write
- Text.region_as_string
- Text.region_from_string
This doesn't cause any functional change as the RNA property
of Bone wasn't overridden by the _GenericBone's property,
however the `children` property was documented twice, causing a warning.
The UI description for the `bpy.types.ActionFCurves.remove` was incorrect;
seemingly a copy-paste typo from the `rna_Action_groups_remove` function.
Reviewed By: sybren, Blendify
Differential Revision: https://developer.blender.org/D14659
Preserve multi socket link order when copying nodes or adding a new
group input sockets by linking directly to multi inputs from the group
input node's extension socket.
This is done by also copying the `multi_input_socket_index` when
the new links are created by copying existing or temporary links.
Reviewed By: Hans Goudey
Differential Revision: http://developer.blender.org/D14535
Keep the existing Rec.709 fit and convert to other colorspace if needed, it
seems accurate enough in practice, and keeps the same performance for the
default case.
Reimplement copy geometry node groups in C. The version implemented in
Python could also manually copy the animation data, but it's more
standard to do this with `BKE_id_copy_ex` and `LIB_ID_COPY_ACTIONS`.
Differential Revision: https://developer.blender.org/D14615
`rna_NodeSocket_refine` and `rna_Node_refine` take significant time
when building the `NodeTreeRef` acceleration data structure, but they
aren't used at all. This commit removes their eager calculation and
instead creates them on-demand in the `rna()` functions. They also
aren't inlined to avoid including `RNA_prototypes.h` in the header.
Differential Revision: https://developer.blender.org/D14674
Continued improvements to the new C++ based OBJ importer.
Performance: about 2x faster.
- Rungholt.obj (several meshes, 263MB file): Windows 12.7s -> 5.9s, Mac 7.7s -> 3.1s.
- Blender 3.0 splash (24k meshes, 2.4GB file): Windows 97.3s -> 53.6s, Mac 137.3s -> 80.0s.
- "Windows" is VS2022, AMD Ryzen 5950X (32 threads), "Mac" is Xcode/clang 13, M1Max (10 threads).
- Slightly reduced memory usage during import as well.
The performance gains are a combination of several things:
- Replacing `std::stof` / `std::stoi` with C++17 `from_chars`.
- Stop reading input file char-by-char using `std::getline`, and instead read in 64kb chunks, and parse from there (taking care of possibly handling lines split mid-way due to chunk boundaries).
- Removing abstractions for splitting a line by some char,
- Avoid tiny memory allocations: instead of storing a vector of polygon corners in each face, store all the corners in one big array, and per-face only store indices "where do corners start, and how many". Likewise, don't store full string names of material/group names for each face; only store indices into overall material/group names arrays.
- Stop always doing mesh validation, which is slow. Do it just like the Alembic importer does: only do validation if found some invalid faces during import, or if requested by the user via an import setting checkbox (which defaults to off).
- Stop doing "collection sync" for each object being added; instead do the collection sync right after creating all the objects.
Cleanup / Robustness:
This reworking of parser (see "removing abstractions" point above) means that all the functions that were in `parser_string_utils` file are gone, and replaced with different set of functions. However they are not OBJ specific, so as pointed out during review of the previous differential, they are now in `source/blender/io/common` library.
Added gtest coverage for said functions as well; something that was only indirectly covered by obj tests previously.
Rework of some bits of parsing made the parser actually better able to deal with invalid syntax. E.g. previously, if a face corner were a `/123` string, it would have incorrectly treated that as a vertex index (since it would get "hey that's one number" after splitting a string by a slash), instead of properly marking it as invalid syntax.
Added gtest coverage for .mtl parsing; something that was not covered by any tests at all previously.
Reviewed By: Howard Trickey
Differential Revision: https://developer.blender.org/D14586
- Was not exporting "Poly" curves at all,
- Had a crash when a single object contains multiple curves of different types -- it had a check for "is this nurbs compatible?" only for the first curve, and then proceeded to treat the other curves as nurbs as well, without checking for validity.
Fixed both issues by doing the same logic as in the old python exporter:
- Poly curves are supported,
- Treat object as "nurbs compatible" only if all the curves within it are nurbs compatible.
Added test coverage in the gtest suite. While at it, made "all_curves" test use the "golden obj file template" style test, instead of a manually coded test that checks intermediate objects but does not check the final exported result.
Reviewed By: Howard Trickey
Differential Revision: https://developer.blender.org/D14611
The new 3.1 OBJ exporter code had incorrect code to determine which vertex group a polygon belongs to -- for each vertex, it was only looking at the first vertex group it has, and not using the group weight either.
This 99% fixes T96824, but not 100% on the user's submitted mesh -- exactly two faces from that mesh get assigned a different group compared to the old exporter. Either choice is "correct" given that on these two faces there are two vertex groups with equal contribution. The old Python exporter was picking the group based on internal python group name map order, whereas the new C++ exporter is picking the group with the lowest index, in case of ties. I'm not sure if it's possible to fix this TBH, will have to wait until the importer is also C++.
While at it, the new vertex group calculation code was doing a lot of redundant work for each and every face (traversing group lists several times, allocating & freeing memory), so I fixed that. Exporting a 6-level subdivided Monkey mesh with 30 vertex groups was taking 810ms, now takes 330ms.
Reviewed By: Howard Trickey
Differential Revision: https://developer.blender.org/D14500
This adds a basic unit test to check USD has been correctly
build with imaging components to support building both with
the old and new libs, it automatically adds the test when it
detects a library with imaging enabled. (platform devs will
have to pay attention it runs the test to validate the libs
build correctly)
For future use in the code it also defines a USD_HAS_IMAGING
define one could check if we're building against an USD lib
that has it (just because we build/ship with it, doesn't
mean downstream builds will ship with it, so we'll have
to be a little pro-active there)
Reviewed By: sybren
Differential Revision:https://developer.blender.org/D14456
In some circumstances singular files with numbers in their name (like
turntable-1080p.png or frame-1042.png) might be detected as a UDIM.
The root cause in this particular instance was because `BKE_image_get_tile_info`
believed this file to be a tiled texture and replaced the filename with
a tokenized version of it. However, later on, the code inside `image_open_single`
did not believe it was tiled because only 1 file was detected and our
tiled textures require at least 2. This discrepancy lead to the broken
filename situation.
This was a regression since rB180b66ae8a1f as that introduced the
tokenization changes.
Differential Revision: https://developer.blender.org/D14667
Also, as a suggestion, this patch changes Mask By Color and Color Filter to be the same shade of green as paint and smear tool icons
{F12998856}
{F12998857}
{F12998858}
Reviewed By: Julian Kaspar & Joseph Eagar
Differential Revision: https://developer.blender.org/D14632
Ref D14632
If the `wpoly` vector was small, the `wpoly_new` pointer could point
to part of its inline buffer on the stack, which becomes invalid out of
that scope. Instead, store `wpoly_new` as a span, and assign it properly
from the moved vector.
The HIG mentions that redundant words like "Enables" or "Activates"
shouldn't be used for tooltips of boolean properties. In this case
"When checked" was the redundant language that was implied by
the checkbox itself-- convention is to just state what the property
does when it's on.
Also change a few conjugations to the imperative and simplify
wording slightly, in order to be more consistent with language
elsewhere in Blender, and to be a bit more direct.
Differential Revision: https://developer.blender.org/D14644
Introduced by my recent commit: {rB3acbe2d1e933}
Lead to crash when insert_keyframe_direct() was called. Keyframing
crashed for NLA special properties (influence, animated_time),
driven properties, etc.
This commit changes the Curve to Mesh node to work with `Curves`
instead of `CurveEval`. The change ends up basically completely
rewriting the node, since the different attribute storage means that
the decisions made previously don't make much sense anymore.
The main loops are now "for each attribute: for each curve combination"
rather than the other way around, with the goal of taking advantage
of the locality of curve attributes. This improvement is quite
noticeable with many small curves; I measured a 4-5x improvement
(around 4-5s to <1s) when converting millions of curves to tens of
millions of faces. I didn't obverse any change in performance compared
to 3.1 with fewer curves though.
The changes also solve an algorithmic flaw where any interpolated
attributes would be evaluated for every curve combination instead
of just once per curve. This can be a large improvement when there
are many profile curves.
The code relies heavily on a function `foreach_curve_combination`
which calculates some basic information about each combination and
calls a templated function. I made assumptions about unnecessary reads
being removed by compiler optimizations. For further performance
improvements in the future that might be an area to investigate.
Another might be using a "for a group of curves: for each attribute:
for each curve" pattern to increase the locality of memory access.
Differential Revision: https://developer.blender.org/D14642
This is a partial fix to the fact that rendering with EEVEE or other GL
render engines is currently blocking the whole UI when asking to redraw
a viewport.
This patch just bypasses the viewport bind (containing the Draw Context
lock) and the following drawing. There is an update tagging to not
loose a viewport update if there was one asked.
Other queries other than view redraw (such as selection depth drawing or
offscreen drawing) will still block the whole UI as they need immediate
data feedback.
Ping @Severin for the change in `WM_draw_region_viewport_bind()`.
I'm assuming this is not an issue because it's highly unlikely to
bring up this operator during rendering. But in this case, it would just
lock as usual.
The bypassing in `DRW_notify_view_update` might be a bit overparanoid.
The ported normal calculation from ceed37fc5c neglected to
use the tilt attribute to rotate the normals around the tangents.
This commit adds that behavior back, adding a new math header file
to avoid duplicating the rotation function for normalized axes.
Differential Revision: https://developer.blender.org/D14655
This patch contains an initial pixel extractor for PBVH and an initial paint brush implementation.
PBVH is an accelleration structure blender uses internally to speed up 3d painting operations.
At this moment it is extensively used by sculpt, vertex painting and weight painting.
For the 3d texturing brush we will be using the PBVH for texture painting.
Currently PBVH is organized to work on geometry (vertices, polygons and triangles).
For texture painting this should be extended it to use pixels.
{F12995467}
Screen recording has been done on a Mac Mini with a 6 core 3.3 GHZ Intel processor.
# Scope
This patch only contains an extending uv seams to fix uv seams. This is not actually we want, but was easy to add
to make the brush usable.
Pixels are places in the PBVH_Leaf nodes. We want to introduce a special node for pixels, but that will be done
in a separate patch to keep the code review small. This reduces the painting performance when using
low and medium poly assets.
In workbench textures aren't forced to be shown. For now use Material/Rendered view.
# Rasterization process
The rasterization process will generate the pixel information for a leaf node. In the future those
leaf nodes will be split up into multiple leaf nodes to increase the performance when there
isn't enough geometry. For this patch this was left out of scope.
In order to do so every polygon should be uniquely assigned to a leaf node.
For each leaf node
for each polygon
If polygon not assigned
assign polygon to node.
Polygons are to complicated to be used directly we have to split the polygons into triangles.
For each leaf node
for each polygon
extract triangles from polygon.
The list of triangles can be stored inside the leaf node. The list of polygons aren't needed anymore.
Each triangle has:
poly_index.
vert_indices
delta barycentric coordinate between x steps.
Each triangle is rasterized in rows. Sequential pixels (in uv space) are stored in a single structure.
image position
barycentric coordinate of the first pixel
number of pixels
triangle index inside the leaf node.
During the performed experiments we used a fairly simple rasterization process by
finding the UV bounds of an triangle and calculate the barycentric coordinates per
pixel inside the bounds. Even for complex models and huge images this process is
normally finished within 0.5 second. It could be that we want to change this algorithm
to reduce hickups when nodes are initialized during a stroke.
Reviewed By: brecht
Maniphest Tasks: T96710
Differential Revision: https://developer.blender.org/D14504
* Curves objects now support the geometry nodes modifier.
* It's possible to use the curves object with the Object Info node.
* The spreadsheet shows the curve data.
The main thing holding this back currently is that the drawing code
for the curves object is very incomplete. E.g. it resamples the curves
always in the end, which is not expected for curves in general.
Differential Revision: https://developer.blender.org/D14277
**Relevant to Artists:** This patch adds an option to the Parenting
menu, `Object (Keep Transform Without Inverse)`, and Apply menu, `Parent
Inverse`. The operators preserve the child's world transform without
using the parent inverse matrix. Effectively, we set the child's origin
to the parent. When the child has an identity local transform, then the
child is world-space aligned with its parent (scale excluded).
**Technical:** In both cases, the hidden parent inverse matrix is
generally set to identity (cleared or "not used") as long as the parent
has no shear. If the parent has shear, then this matrix will not be
entirely cleared. It will contain shear to counter the parent's shear.
This is required, otherwise the object's local matrix cannot be properly
decomposed into location, rotation and scale, and thus cannot preserve
the world transform.
If the child's world transform has shear, then its world transform is
not preserved. This is currently not supported for consistency in the
handling of shear during the other parenting ops: Parent (Keep
Transform), Clear [Parent] and Keep Transform. If it should work, then
another patch should add the support for all of them.
Reviewed By: sybren, RiggingDojo
Differential Revision: https://developer.blender.org/D14581
The new created strokes were not setting the right `orig` pointers, so the select operator could not select the strokes and points.
Now, the original pointers are set in the new strokes. To set the values is necessary assign the original pointer from the reference stroke because in modifiers the stroke is evaluated, so we need back two levels: Eval->Eval->Orig
Issue introduced in {rB80859a6cb272}
Only seen on Windows.
The `keyword_parse` lambda function code did not consider `\r` as a
whitespace char, resulting in a wrong parse.
(More investigation needs to be done).
Assume that only one layer matches the id and return instead
of continuing to iterate over attributes after the layers have
been potentially reallocated.
This commit removes all EEVEE specific code from the `gpu_shader_material*.glsl`
files. It defines a clear interface to evaluate the closure nodes leaving
more flexibility to the render engine.
Some of the long standing workaround are fixed:
- bump mapping support is no longer duplicating a lot of node and is instead
compiled into a function call.
- bump rewiring to Normal socket is no longer needed as we now use a global
`g_data.N` for that.
Closure sampling with upstread weight eval is now supported if the engine needs
it.
This also makes all the material GLSL sources use `GPUSource` for better
debugging experience. The `GPUFunction` parsing now happens in `GPUSource`
creation.
The whole `GPUCodegen` now uses the `ShaderCreateInfo` and is object type
agnostic. Is has also been rewritten in C++.
This patch changes a view behavior for EEVEE:
- Mix shader node factor imput is now clamped.
- Tangent Vector displacement behavior is now matching cycles.
- The chosen BSDF used for SSR might change.
- Hair shading may have very small changes on very large hairs when using hair
polygon stripes.
- ShaderToRGB node will remove any SSR and SSS form a shader.
- SSS radius input now is no longer a scaling factor but defines an average
radius. The SSS kernel "shape" (radii) are still defined by the socket default
values.
Appart from the listed changes no other regressions are expected.
This adds a structure, `ABCReadParams`, to store some parameters passed
to `ABC_read_mesh` so we avoid passing too many parameters, and makes it
easier to add more parameters in the future without worrying about
argument order.
Differential Revision: https://developer.blender.org/D14484
Box, Circle and Lasso select were not taking into account if a
mask(point) was parented; selection was only succeeding in the original
place.
Now check coordinates from evaluated mask (points) instead while
setting selection flags and DEG tagging still happens on the original ID.
Maniphest Tasks: T97135
Differential Revision: https://developer.blender.org/D14651
Extremely subttle bug that would only appear in some specific
circumstances, would cause memfile undo writing code to falsely detect
some ID as changed because it would get the wrong 'starting point' of
comparison with existing previous memfile step.
See T85756 for detailed explanation and reproducible case.
This adds a new node editor overlay that helps users to see where
named attributes are used. This is important, because named
attributes can have name collisions between independent node
groups which can lead to hard to find issues.
Differential Revision: https://developer.blender.org/D14618
When GPU subdivision is enabled the mesh objects remain unsubdivided on
the CPU side, and subdivision should be requested somewhat manually (via
`BKE_object_get_evaluated_mesh`).
When referencing an object, the Object Info node calls
`bke::object_get_evaluated_geometry_set` which first checks if a Geometry
Set is present on the object (unless we have a mesh in edit mode). If so
it will return it, if not, the object type is discriminated, which will
return a properly subdivided mesh object via `add_final_mesh_as_geometry_component`.
The unsubdivided mesh is returned because apparently the check on the
Geometry Set always succeeds (as it is always set in `mesh_build_data`).
However, the mesh inside this Geometry Set is not subdivided.
This adds a check for a MeshComponent in this Geometry Set, and if one
exists, calls `add_final_mesh_as_geometry_component` which will ensure
that the mesh is subdivided on the CPU side as well.
Differential Revision: https://developer.blender.org/D14643
Originally was noticed when using a linked background scene and a scene
camera from another (local) scene.
The root issue was that relation from view layer to object's base flags
evaluation was using wrong view layer. This is because the relation was
created between object and currently built view layer, and it only was
happening once (since the object-level relations are only built once).
Depending on order in which `build_object` was called it was possible
that relation from a wrong view layer was used.
Now the code is better split to indicate which parts of object relations
are built when object comes from a base in the view layer, and which ones
are built on indirect linking of object to the dependency graph.
This patch makes relations correct in the cases when the same object is
used as a base in both active and set scenes. But, the operation which
handles object-level flags might not behave correctly as there is no
known design of what is the proper thing to do in this case. Making a
clear design and implementation of case when object is shared between
active and set scene is outside of the scope of this patch.
Differential Revision: https://developer.blender.org/D14626
Prefer using immVertex3f when 3D shaders are used for 2D rendering due to overhead of vertex padding in hardware. CPU overhead is negligible.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D14494
MSL follows C++ standard convention, and such variable declarations within switch statements must have their scope localised within each case. Adding braces in all cases ensures correct behaviour and avoids 'case ... bypass initialization of local variable' compilation error.
struct initialisation to follow C++ rules for Metal. Implicit constructors replaced with either explicit constructors or list-initialization where appropriate.
Ref T96261
Authored by Apple: Michael Parkin-White
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D14451
Add a new operator, "Start Tweaking Strip Actions (Full Stack)", which
allows you to insert keyframes and preserve the pose that you visually
keyed while upper strips are evaluating,
The old operator has been renamed from "Start Tweaking Strip Actions" to
"Start Tweaking Strip Actions (Lower Stack)" and remains the default for
the hotkey {key TAB}.
**Limitations, Keyframe Remapping Failure Cases**:
1. For *transitions* above the tweaked strip, keyframe remapping will
fail for channel values that are affected by the transition. A work
around is to tweak the active strip without evaluating the upper NLA
stack.
It's not supported because it's non-trivial and I couldn't figure it
out for all transition combinations of blend modes. In the future, it
would be nice if transitions (and metas) supported nested tracks
instead of using the left/right strips for the transitions. That
would allow the transitioned strips to overlap in time. It would also
allow N strips to be part of the (previously) left and right strips,
or perhaps even N strips being transitioned in sequence (similar to a
blend tree). Proper keyframe remapping through all that is currently
beyond my mathematical ability. And even if I could figure it out,
would it make sense to keyframe remap through a transition?
//This case is reported to the user for failed keyframe insertions.//
2. Full replace upper strip that contains the keyed channels.
//This case is reported to the user for failed keyframe insertions.//
3. When the same action clip occurs multiple times (colored Red to
denote it's a linked strip) and vertically overlaps the tweaked
strip, then the remapping will generally fail and is expected to
fail.
I don't plan on adding support for this case as it's also non-trivial
and (hopefully) not a common or expected use case so it shouldn't be
much of an issue to lack support here.
For anyone curious on the cases that would work, it works when the
linked strips aren't time-aligned and when we can insert a keyframe
into the tweaked strip without modifying the current frame output of
the other linked strips. Having all frames sampled and the strip
non-time aligned leads to a working case. But if all key handles are
AUTO, then it's likely to fail.
//This case is not reported to the user for failed keyframe
insertions.//
4. When using Quaternions and a small strip influence on the tweaked
Combine strip. This was an existing failure case before this patch
too but worth a mention in case it causes confusion. D10504 has an
example file with instructions.
//This case is not reported to the user for failed keyframe insertions. //
5. When an upper Replace strip with high influence and animator keys to
Quaternion Combine (Replace is fine). This case is similar to (4)
where Quaternion 180 degree rotation limitations prevent a solution.
//This case is not reported to the user for failed keyframe insertions.//
Reviewed By: sybren, RiggingDojo
Differential Revision: https://developer.blender.org/D10504
Undefined behaviour for divergent control-flow fixes, replacement for partial vector references, and resolution of a number of calculation precision issues occuring on macOS.
Authored by Apple: Michael Parkin-White
Ref: T96261
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D14437
This patch fixes a typo in commit e59f754c16 which incorrectly uses `GPU_TEXTURE_ARRAY` instead of `GPU_FORMAT_COMPRESSED`.
`GPU_FORMAT_COMPRESSED` and `GPU_TEXTURE_ARRAY` both currently evaluate to 16, so this patch does not change anything functionally; however, this patch will prevent issues from arising in the future.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D14384
Add operator to select markers left/right of the current frame
(including the current frame).
`bpy.ops.marker.select_leftright(mode='LEFT', extend=False)`
`mode` can be either 'LEFT' or 'RIGHT'.
The naming and defaults of the above variables match similar operators
(e.g., `bpy.ops.nla.select_leftright`)
This also adds a new sub-menu to the Marker menu found in animation
editors, exposing both the new `bpy.ops.marker.select_leftright`
operator as well as the `bpy.ops.marker.select_all` operator.
Despite the name "Before Current Frame" and "After Current Frame", it
also selects a marker that falls on the current from for both of the
modes. This is to match the behavior found in the `nla.select_leftright`
operator.
RCS: https://blender.community/c/rightclickselect/OgmG/
Reviewed by: sybren, looch
Differential Revision: https://developer.blender.org/D14176
F2 allows renaming lots of different types of active items, and now it
also works for markers.
Before, Ctrl+M was used, and it's context-sensitive: you often get
"Mirror Keys" instead, when your cursor isn't on the markers region, and
that operator has nothing to do with either renaming or markers.
**What this commit does:**
- Replace Ctrl+M shortcut with F2.
- Adds the `TOPBAR_PT_name_marker` panel which is implemented similar
to the global rename panel. This having to press enter twice to
confirm or escape twice to cancel, which would happen if the
`marker.rename` operator was called directly.
- Replace usages of `marker.rename` in the UI with `wm.call_panel`.
- To make the Industry Compatible keymap consistent with Blender
Default, the rename shortcut only works when hovering the markers
area.
Reviewed By: ChrisLend, sybren
Differential Revision: https://developer.blender.org/D12298
There are no real difference from the previous icons, but since some
manual changes were introduced in the icons file, we still needed
a final sync between them.
Unlike regular selection cycling that is activated when clicking again
in the same location, object mode would cycle to another object
if the object that was selected happened to already be active.
This made it impossible to click-drag to tweak the active object
if there were other objects behind it as those would be activated first.
Resolves T96752.
Particles baked into memory would never load the final frame because
of an off-by-one error calculating the particles `dietime`.
This value indicates the frame which the particle ceases to exist but
was being set to the end-frame which caused this bug as the scenes
end-frame is inclusive.
While the last frame was properly written and read from memory,
the `dietime` was set to the last frame causing all the particles to be
considered dead when calculating the cached particle system.
The GPU evaluation for curves will have to change significantly from the
current particle hair drawing code, due to its more general use cases
and support for more curve types. To simplify that process and avoid
introducing regressions for the rendering of hair particle systems,
this commit splits drawing functions for the curves object and
particle hair.
The changes are just inlining of functions and copying code
where necessary.
Differential Revision: https://developer.blender.org/D14576
Problem is that the orco layer was not taken care of by the GPU
subdivision routines. This only handles the issues for EEVEE/Workbench.
For Cycles, this would need to be handled at the wrapper level somehow.
Use Alt-Slash to remove objects from local-view (was M prior to [0]),
following the convention of using Alt to perform the reverse of an
action. Also remove the confirmation menu as this key as it can be
undone and it's not likely to be pressed by accident.
This can be useful to quickly subtract items from a complex selection
with items that only become visible when entering local-view.
The M key was originally used in 2.4x since moving between layers wasn't
possible. Now moving between collections is possible in local-view
the keys collided.
[0]: cf5d582b77
edges
When wireframe mode is turned on, the subdivision edges not originating
from coarse edges were also drawn as regular edges, which would confuse
users trying to select them. These should not be drawn in edit mode,
only in object mode when optimal display is turned off (matching the CPU
subdivision case).
Fix word-wrapped tooltip text not showing by aligning to pixel grid.
See D14639 for more details.
Differential Revision: https://developer.blender.org/D14639
Reviewed by Campbell Barton
The "dir" argument to `BKE_where_on_path` was only actually
used in a few places. It's easier to see where those are if there
isn't always a dummy argument.
When displaying a deform modifier in edit mode, a cached
array of positions is used. Parallelizing bounds calculation when
that array exists can improve the framerate when editing slightly
(a few percent). I observed an improvement of the min/max itself
of about 10x (4-5ms to 0.4ms).
If all of the curves are poly curves, the evaluated positions are the
same as the original positions. In this case just reuse the original
positions span as the evaluated positions.
Addresses T97257, to make it consistent with regular attributes tab
Review by: Julian Kaspar
Differential Revision: https://developer.blender.org/D14631
Ref D14631
`GPU_shader_get_uniform_block` is marked as deprecated and the value
returned does not match what `GPU_uniformbuf_bind` expects.
Also, small typo fix in python error message.
Differential Revision: https://developer.blender.org/D14638
This behaviour was introduced in a687d98e67 to bring the old obscure
"M" operator to remove objects from the local view. In order to avoid
the keymap clash with the Move to Collection operator, the Move to
Collection was artificially restricted to work in local view.
In retrospect, the "Remove from Local View" operator is in the menu anyways,
so it didn't even need to have a shortcut (back in 2.79 the operator was
not in a menu).
The changes introduced here are:
* No shortcut for "Remove from Local View"
* No more restrictions to "Move/Link to Collection" from local view.
Thanks for Philipp Oeser for digging the old commit that introduced this
and for the rationale on the changes.
This can be useful to match transforms to what native Cycles
would see in Blender, as USD typically uses centimeters, but
Blender uses meters. This patch also fixes the hardcoded focal
length multiplicator, which is now using the same units as
everything else. Default of "stageMetersPerUnit" is 0.01 to match
the USD default of centimeters.
Differential Revision: https://developer.blender.org/D14630
Print it as a "%s" so that possible percentage symbols in the
error message does not cause issues.
Use proper assert (assert(true) is a no-op).
Also use `empty()` instead of `length()`.
Reviewed with Clement in real life.
Solves compilation warning with Clang, and moves manipulation with
DNA structures to the designed way for C++.
The tests and few other places are update to the new code by Jacques.
Ref T96847
Maniphest Tasks: T96847
Differential Revision: https://developer.blender.org/D14625
After appending, new link/append code would delete linked IDs, even if
those where pre-existing. Note that this would actually lead to invalid
memory access later in append code (ASAN crash).
This was one of multiple placeholder brushes to simplify development.
Having it is not necessary anymore.
It was a brush that could add new curves according to a specific density.
This functionality will be brought back as a new brush later.
Ref T97255.
Implements T97163
Newly created meshes have all voxel remesher checkboxes aside from Fix Poles enabled.
Startup files updated with versioning.
Reviewed By @JulianKaspar
Differential Revision: https://developer.blender.org/D14608
Ref D14608
Regression in [0] which caused canceled PRESS events not to generate
CLICK_DRAG.
Resolve by checking for an active brush tool in poll instead of the
PARTICLE_OT_brush_edit invoke function.
[0]: 4d0f846b93,
- Add logging for CLICK_DRAG event handling to debug drag events.
- Use logging API for reporting the key-map, operator and event.
This command now prints useful information for investigating
key-map and event handling issues:
blender --log "wm.handler.*" --log-level 4
Internally many offsets for BLF were integers but exposed as floats,
since these are used in pixel-space, many callers were converging them
back to integers. Simplify logic by using ints.
Support sub-pixel kerning and hinting for future support for improved
character placement. No user visible changes have been made.
- Calculate sub-pixel offsets, using integer maths.
- Use convenience functions to perform the conversions and hide the
underlying values.
- Use `ft_pix` type to distinguish values that use sub-pixel integer
values from freetype and values rounded to pixels.
This was originally based on D12999 by @harley with the user visible
changes removed so they can be applied separately.
In order to allow GLSL Cross Compilation across platforms, expose in
Python the `GPUShaderCreateInfo` strategy as detailed in
https://wiki.blender.org/wiki/EEVEE_%26_Viewport/GPU_Module/GLSL_Cross_Compilation
The new features can be listed as follows:
```
>>> gpu.types.GPUShaderCreateInfo.
define(
fragment_out(
fragment_source(
push_constant(
sampler(
typedef_source(
uniform_buf(
vertex_in(
vertex_out(
vertex_source(
>>> gpu.types.GPUStageInterfaceInfo.
flat(
name
no_perspective(
smooth(
>>> gpu.shader.create_from_info(
```
Reviewed By: fclem, campbellbarton
Differential Revision: https://developer.blender.org/D14497
Propagate the fp settings from the main thread to all the worker threads (the fp settings includes the FZ settings among other things) - this guarantees consistency in execution of floating point math regardless if its executed in tbb thread arena or on main thread
Add FZ mode to arm64/aarch64 in parallel to the way its been done on intel processors, currently compiling for arm target does not set this mode at all, hence potentially runs slower and with possible results mismatch with intel x86.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D14454
We better handle NULL object pointers before doing layer collections
resync, otherwise said resync process has to deal with those NULL
pointers. By the look of it this mistake has been there since the origin
of the remapping/relinking code.
Also for safety (and optimization), do not perform layer collection
resync from `libblock_remap_data_postprocess_object_update` when
`libblock_remap_data_postprocess_collection_update` is called
immediately afterwards.
Also added same 'skip on NULL collection object pointer' check to
`layer_collection_local_sync` as the one in
`layer_collection_objects_sync`, since it's fairly hard to always
guaranty there is no such NULL pointer when calling that code.
Animation would still play in the viewport.
There are two ways to unlink an action from the Outliner:
[1] `Unlink Action` on the Animation Data context menu.
This does `outliner_do_data_operation` / `unlinkact_animdata_fn` and has
the correct DEG update.
[2] `Unlink` on the Action context menu
This does `outliner_do_libdata_operation` / `unlink_action_fn` and was
missing the DEG update.
Now add the missing DEG update to the second case.
Maniphest Tasks: T95679
Differential Revision: https://developer.blender.org/D14089
The issue reported was that the recently introduced manual framerange of
an action (see rB5d59b38605d6) was not having an immediate effect in
case the action was pushed down from the Action Editor and only showed
its effects after e.g. saving and reloading the file. However doing the
same thing (pushing down the action) was working fine when done from the
NLA.
Now bring pushdown in sync (in terms of DEG update tagging) between the
Action Editor and the NLA, meaning that now both the owner and the
action are tagged when pushdown happens from the Action Editor as well.
Fixes T96964.
Maniphest Tasks: T96964
Differential Revision: https://developer.blender.org/D14564
The new tab in the properties panel for "Color Attributes" shows the
data type and domain, just like the Attributes tab.
The issue is that the UI does not scale well and can only display the
full names when dragged to an extreme width.
This is due to the inclusion of the render icon in between the
attribute name and attribute type description.
This patch changes the order that items are displayed in the Color
Attributes Panel. Moving the render icon to the very right.
The result is consistent with other parts of the Blender UI and does
not take as much space to display the full text.
Reviewed By: @jbakker
Differential Revision: https://developer.blender.org/D14567
Ref D14567
Color filter sharpening now clamps the output.
The sharpening delta is now calculated from the
difference of two levels of vertex averaging instead
of one smooth iteration and the base color.
TODO: Sharpen in a different color space;
SRGB-linear has saturation artifacts. I
tried HSL but it had value artifacts. I'd
like to try LAB but we don't seem to have
conversion functions for it (at least as far
as I could see).
- Replace SPACE_TYPE_LAST with SPACE_TYPE_NUM (adding 1).
- Rename RGN_TYPE_LEN to RGN_TYPE_NUM
This makes it possible to tag space-type/region-type combinations
with `bool tag[SPACE_TYPE_NUM][RGN_TYPE_NUM]` which reads more clearly
than `bool tag[SPACE_TYPE_LAST + 1][RGN_TYPE_LEN]`.
The type of the key was changed from string to integer in 66da2f537a, but
the GSet was still being created for string keys.
As long as the integers stay small enough, this even kind of works on
little-endian systems, but of course it should use an integer hash instead.
Currently, hovering over a socket itself shows no tooltip at all, while
hovering over its value field shows "Default value", which is not helpful.
This patch therefore implements socket tooltips following the proposal at
https://blender.community/c/rightclickselect/2Qgbbc/.
A lot of the basic functionality was already implemented for Geometry Nodes,
where hovering over the socket itself shows introspection info.
This patch extends this by:
- Supporting dynamic tooltips on labels, which is important for good tooltip
coverage in a socket's region of the node.
- Adding a function to setting a dynamic tooltip for an entire uiLayout, which
avoids needing to set it manually for a wide variety of socket types.
- Hiding the property label field in a tooltip when dynamic tooltip is also
provided. If really needed, this label can be restored through the dynamic
tooltip, but in all current cases the label is actually pointless anyways
since the dynamic tooltip gives more accurate and specific information.
- Adding dynamic tooltips to a socket's UI layout row if it has a description
configured, both in the Node Editor as well as in the Material Properties.
Note that the patch does not add any actual tooltip content yet, just the
infrastructure to show them. By default, sockets without a description still
show the old "Default value" tooltip.
For an example of how to add socket descriptions, check the Cylinder node
in the Geometry Nodes.
Differential Revision: https://developer.blender.org/D9967
When using proportional editing, the 'project onto self' snap setting
is ignored since proportional editing does not allow snapping to
self. The UI should reflect this fact. This patch makes 'project onto
self' active only when proportional editing is off.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D14496
Simply add the few lines so that the Cycles renderable New Curves
(with a small temporary patch to output the new type to render engines)
would get assigned a shader (in particular a hair shader).
Differential Revision: https://developer.blender.org/D14622
* Don't assume the display colorspace name fully defines the transform
to display space, this is not true in OpenColorIO 2 where view transforms
may be defined in more complexs ways than just specifying a colorspace.
* In places where we need to store the display colorspace name, resolve
<USE_DISPLAY_NAME> token manually.
Ref T96590
Adding nodes via `NodeAddOperator` could fail if the node's poll fails
in `rna_NodeTree_node_new`. Examples are trying to add a RenderLayers
node or a Cryptomatte node to a nodegroup.
Now except the python error and use blender error reporting only instead
of throwing full python stacktraces at the user.
Differential Revision: https://developer.blender.org/D14584
For some reasons(c) some base classes (like `bpy.types.Modifier`) are
not listed anymore by a call to
`bpy.types.ID.__base__.__subclasses__()`, unless they are first accessed
explicitely (e.g. by executing `bpy.types.Modifier` etc.).
Coordinate checks in `spline_under_mouse_get` need to take place with
the evaluated mask to get the right center. This is now more in line to
how this is done in `ED_mask_point_find_nearest`.
Note: similar issues are reported with box/circle/lasso selection in
T97135, will tackle these separately though.
Maniphest Tasks: T85467
Differential Revision: https://developer.blender.org/D14598
This implements the icon for snake hook, as well as tweak the
growth brush to make it bigger and with the triangles more
distinct for better reading of the icon.
Differential Revision: https://developer.blender.org/D14616
It was not possible to assign a shortcut to menu items in the insert
key-frame menu going back to version 2.7x. Doing so would replace the
current key that opens the insert keyframe menu (I-key by default),
instead of binding a key to insert a key-frame for the keying-set
referenced by the menu item.
Now each menu item can be bound to a key or added to the "Quick
Favorites" menu, directly inserting a key-frame for the corresponding
keying-set.
Note that users must use the operator `anim.keyframe_insert_by_name`
when setting up key-shortcuts as `anim.keyframe_insert` is only intended
to launch the menu.
Keymap Editor:
When editing these key-map items in the key-map editor, the keying-set
identifier must be used. At the moment the key-map editor doesn't
support showing a drop-down list. The identifiers can be used from the
tool-tip or the info editor.
{F12994924}
Details:
Use `ANIM_OT_keyframe_insert_by_name` instead of
`ANIM_OT_keyframe_insert_menu` for the insert keyframe popup menu to
resolve the following issues binding keys to keying sets:
- The index of the keying set isn't stable (adding/removing keying sets
may change it).
- Binding a key to items in the popup menu triggers a popup instead of
inserting a key using the keying set from the menu item.
While support for using the current operator could be improved, it will
still only work for built-in keying sets, so I'd prefer to use an
operator that is intended for key-bindings.
Besides supporting binding keys to menu items there are no functional
changes.
Reviewed By: sybren
Ref D14289
This simply adds access to the vertex crease layer from Python
code. Documentation was modified to remove "Edge" as it is
shared between edges and vertices, similarly to bevel weights.
Differential Revision: https://developer.blender.org/D14605
- Missing star prefix.
- Unnecessary indentation.
- Blank line after dot-points
(otherwise doxygen merges with the previous dot-point).
- Use back-slash for doxygen commands.
- Correct spelling.
These operators build a list of all lightgroups that are used by the view layer's
scene and either add all used lightgroups that are not part of the view layer yet
or remove all lightgroups in the view layer that are not being used.
Differential Revision: https://developer.blender.org/D14596
As far as I can see, it makes a lot of sense to have the alpha channel here, it matches the 2.x behavior and also matches what Eevee is doing.
Differential Revision: https://developer.blender.org/D14595
Use the Extend method for these, as these do not work correctly. For UVs
it's better to extend the UVs from the same face, and for tangent space
the normals should be encoded in a matching tangent space.
Later the Adjacent Faces method might be improved to support these cases.
Ref T96977
Differential Revision: https://developer.blender.org/D14572
Port the "Normal" and "Curve Tangent" nodes to the new curves data-block
to avoid the conversion to `CurveEval`. This should make them faster by
avoiding all that copying, but otherwise nothing else has changed.
This also includes a fix to move the normal mode as a built-in curve
attribute when converting to and from `CurveEval`. The attribute is
needed because the option is used implicitly in many nodes currently.
Differential Revision: https://developer.blender.org/D14609
Since effect strips can't be transformed directly, their selection had
to be forced in order to process them. This often failed in more
complicated scenarios, because there was no attempt to parse hierarchy
completely. In worst case only one effect in chain would be selected.
This code was marked by `XXX_DURIAN_ANIM_TX_HACK`.
Instead solution described above, a collection of strips that depend
on non effect strip position is built by function
`query_time_dependent_strips_strips` and it is stored in `TransSeq`.
In `flushTransSeq` this collection is iterated and transformation offset
is applied to effect strip animation. Strips in collection should be
consistent with true state of dependency and should be complete.
Functional changes:
- When 2-input effect strip changes position, animation is offset even
if only handles are moved. This only applies to 2-input effect however.
- Selection is not extended to include effect strips anymore. If effects
are to be moved, they must be selected manually. This is because
previously it was very hard to reorganize effects in chain, since moving
first strip in chain would always select anywhere from 1 to n effects.
So creating or filling gap in channel would almos always result in
collision especially if their order in timeline doesn't perfectly
represent their order in chain.
Previously, the new attributes were zero-initialized. However, sometimes
the default has to be something else. The old behavior led to unexpected
behavior in the Snap Curves to Surface operator in Deform mode, when the
curves were not attached to the surface before.
Differential Revision: https://developer.blender.org/D14588
This change moves the grid panel UI from the View tab up into the
Overlay panel.
Reasons to move to the Overlay panel include:
- Consistency with the grid options in the 3D viewport
- The grid has been drawn as an Overlay for quite some time already
Additional changes that now make sense to have:
- The grid responds to the main Overlay show/hide toggle
- Adds a toggle to show/hide the grid which is consistent with overlays in general
As before, these grid controls are only available for active UV edit
sessions.
Differential Revision: https://developer.blender.org/D11862
- Use "curve" instead of "spline" in comments
- Use non-plural variable names
- Tag topology dirty after resolution modified rather than positions
- Reorder enum values to change which value is zero (and the default)
- Remove a duplicate unused variable
draw_common.h was included in a C++ file
leading to the linker looking for the
decorated name for `G_draw` which lead
to a linker error.
adding an extern "C" for C++ fixes
the issue.
lengths along a set of points. This can be used for the sample curves
node, or finding new points along a curve when extending
or shrinking it.
This commit uses it in the snake hook brush as an example.
The logic is similar to the uniform length sampling, but the next
sample length is retrieved from the input instead of multiplication.
For the sample node in the future, though this sort of sampling can be
potentially done more efficiently for specific curve types besides
poly curves, it's simpler, at least as a start, to work on a set of
evaluated points that can be treated like a poly curve.
Differential Revision: https://developer.blender.org/D14571
Avoid installing all the ogg, theora, xvid etc. codec lib dev packages
unless we actually build ffmpeg itself. Otherwise they are not necessary
for Blender build itself.
This adds support to show dots for the curves points when in edit mode,
using a specific overlay.
This also adds `DRW_curves_batch_cache_create_requested` which for now
only creates the point buffer for the newly added `edit_points` batch.
In the future, this will also handle other edit mode overlays, and
probably also replace the current curves batch cache creation.
Maniphest Tasks: T95770
Differential Revision: https://developer.blender.org/D14262
The menu with the options was not visible because the tool checked must be the sculpt, not draw.
This was broken in old version, but I cannot determine when or if never worked at expected.
The `frame_offset` used for creating `TimeSamplings` when exporting was
being clamped, which would make subframe sampling potentially fail, or
get out of sync.
Both the Alembic and USD libraries use double precision floating
point numbers internally to store time. However the Alembic I/O
code defaulted to floats even though Blender's Scene FPS, which is
generally used for look ups, is stored using a double type. Such
downcasts could lead to imprecise lookups, and would cause
compilation warnings (at least on MSVC).
This modifies the Alembic exporter and importer to make use of
doubles for the current scene time, and only downcasting to float
at the very last steps (e.g. for vertex interpolation). For the
importer, doubles are also used for computing interpolation weights,
as it is based on a time offset.
Although the USD code already used doubles internally, floats were used
at the C API level. Those were replaced as well.
Differential Revision: https://developer.blender.org/D13855
This patch adds color attributes to TexPaintSlot. This allows an easier selection
when painting color attributes.
Previously when selecting a paint tool the user had to start a stroke, before the
UI reflected the correct TexPaintSlot. Now when switching the slot the active
tool is checked and immediate the UI is drawn correctly.
In the future the canvas selector will also be used to select an image or image texture node
to paint on. Basic implementation has already been done inside this patch.
A limitation of this patch is that is isn't possible anymore to rename images directly from
the selection panel. This is currently allowed in master. But as CustomDataLayers
aren't ID fields and not owned by the material supporting this wouldn't be easy.
{F12953989}
In the future we should update the create slot operator to also include color attributes.
Sources could also be extended to use other areas of the object that use image textures
(particles, geom nodes, etc... ).
Reviewed By: brecht
Maniphest Tasks: T96709
Differential Revision: https://developer.blender.org/D14455
Avoid Blender overwriting artist's choices. The automatic change from
"Hold" (i.e. bidirectional extrapolation) to "Hold Forward" (i.e. only
extrapolate forward in time) has been removed.
This patch does not change strip evaluation. Between two strips, the
first with `None` extrapolation and the next with `Hold`, neither strip
will evaluate, which matches previous behavior. A future patch can
change the evaluation behavior.
Reviewed By: RiggingDojo, sybren
Maniphest Tasks: T82230
Differential Revision: https://developer.blender.org/D14230
Previous commit (rBrB59681a7ccdcf) was effectively doing nothing, due to
weird hacks we had to do with OpenVDB 8.0 to 'integrate' NanoVDB.
Now OpenVDB 9.0 natively includes NanoVDB, which allows us to greatly
simplify that part of the code in install_deps.
The all_objects.blend test scene (in subversion tests repo) contained an
object with a subdivision surface. Which changes vertex positions
slightly, depending on used OpenSubDiv version and the compile flags. It
seems that the intent of the test was "test export of meshes that use
modifiers", so I changed that object to be a cube with a simple "taper"
modifier instead.
While at it, changed OBJ exporter test code to always print the
"expected and what we got" text difference details, when a test fails.
Much easier to see than just "the files are different" output. The code
to print that was behind an off by default flag for some reason.
This diff should get comitted together with updated all_objects templates
in subversion tests repo.
Reviewed By: Sebastian Parborg
Differential Revision: https://developer.blender.org/D14597
The problem was the original file had some vertex weight information, but the weights array was empty, so the duplication was not done and the free memory crashed.
To avoid this type of errors, now before duplicate weights the function checks the pointer and also the number of weights elements in the array to avoid the duplicatiopn of empty data.
With the increased use of multi-character format units and keyword-only
arguments these are increasingly difficult to make sense of.
Split the string onto multiple lines, one per argument.
While verbose it's easier to understand and add new arguments.
Currently, only Lightgroups that exist in the current view layer can be
selected from object or world properties.
The internal UI code already has support for search fields that accept
unknown input, so I just added that to the API and use it for lightgroups.
When a lightgroup is entered that does not exist in the current view layer
(e.g. because it's completely new, because the view layer was switched or
because it was deleted earlier), a new button next to it becomes active and
adds it to the view layer when pressed.
Differential Revision: https://developer.blender.org/D14540
* Add missing GLEW and hgiGL libraries for Hydra
* Fix wrong case sensitive include
* Fix link errors by adding external libs to static Hydra lib
* Work around weird Hydra link error with MAX_SAMPLES
* Use Embree by default for Hydra
* Sync external libs code with standalone
* Update version number to match Blender
* Remove unneeded CLEW/GLEW from test executable
None of this should affect Cycles in Blender.
Ref T96731
This seems to serve no purpose anymore, I don't see anywhere that
CD_MFACE is requested for modifier evaluation, and it's confusing
to have this in this final normals computation function.
Found while looking into D14579.
Differential Revision: https://developer.blender.org/D14580
The mechanism to instance meshes when there are no modifiers did not take
into account that modifiers might get re-evaluated from an operator that
requests loop normals. Now check for that case and no longer use the
instance then.
In the future, a better solution may be to compute loop normals on demand
as is already done for poly and vertex normals, but that would be a big
change.
Differential Revision: https://developer.blender.org/D14579
This frequently showed up in profiling but shouldn't.
This also updates the code to use atomics for more correctness and
adds multi-threading for better performance.
This implements two optimizations:
* Reduce virtual function call overhead when a non-standard virtual
array is used as input.
* Use a lambda in `type_conversion.cc`.
In my test setup, which creates a float attribute filled with the index,
the running time drops from `4.0 ms` to `2.0 ms`.
Differential Revision: https://developer.blender.org/D14585
I observed a 4-5x performance improvement (from 50ms to 12ms)
with five million points, though obviously the change depends on
the hardware.
In the future we may want to disable the parallelization in
`parallel_invoke` when there is a small amount of points.
Differential Revision: https://developer.blender.org/D14590
This patch adds an option to only use every n-th segment of the
envelope result. This can be used to reduce the complexity of the
result.
Differential Revision: http://developer.blender.org/D14503
Method which overrides a base class's virtual methods are expetced to
be marked with `override`. This also gives better idea to the developers
about what is going on.
The first element of the iterator was not being tested against the flag.
So in some cases it would lead to more objects been made into
single-user than the active (or selected) ones.
The goal is to make the Add menu more convenient for the new curves object.
The following changes are done:
* Add `curves` submenu.
* Add an `Empty Hair` operator that also sets the surface object.
* Rename the old operator to `Random`. It's mostly for testing at this point.
Differential Revision: https://developer.blender.org/D14556
This operator snaps the first point of every curve to the corresponding
surface object. The shape of individual curves or their orientation is
not changed.
There are two different attachment modes:
* `Nearest`: Move each curve so that the first point is on the closest
point on the surface. This should be used when the topology of the
surface mesh changed, but the shape generally stayed the same.
* `Deform`: Use the existing attachment information that is stored
for curves to move curves to their new location when the surface
mesh was deformed. This generally does not work when the
topology changed.
The purpose of the operator is to help setup the "ground truth"
for how curves are attached to the surface. When the ground
truth surface changed, the original curves have to be updated
as well. Deforming curves based on an animated surface will be
done with geometry nodes independent of the operator.
In the UI, the operator is currently exposed in curves sculpt mode
in the `Curves > Snap Curves to Surface` menu.
Differential Revision: https://developer.blender.org/D14515
Avoid errors in the legacy Pose Library panel (in Armature properties)
when the Pose Library add-on is disabled.
It's unfortunate that a built-in panel now has knowledge of an add-on.
Then again, it's temporary (one or two Blender releases), and it now uses
feature detection instead of just assuming the add-on is enabled.
The operator could crash in case the context "object" was overridden
from python, but the "active_object" wasnt (and the active object was
not a mesh).
Reason for the crash is a mismatch in the operators poll function
`data_transfer_poll` vs. `dt_layers_select_src_itemf` -- in the former,
the overriden "object" was respected (and if this was a mesh, the poll
was permissive), in the later it wasnt and only the "active_object" was
used (if this was not a mesh, a crash would happen trying to get an
evaluated mesh).
Now rectify how the object which is used is being fetched -> use
`ED_object_active_context` everywhere (see also rBe560bbe1d584).
Maniphest Tasks: T96888
Differential Revision: https://developer.blender.org/D14552
This does two things:
* Introduce new `materialize_compressed` methods. Those are used
when the dst array should not have any gaps.
* Add materialize methods in various classes where they were missing
(and therefore caused overhead, because slower fallbacks had to be used).
This improves performance e.g. when creating an integer attribute
based on an index field. For 4 million vertices, I measured a speedup
from 3.5 ms to 1.2 ms.
Add the ability to get/set the selected text.
**Calling the new methods:**
- `bpy.data.texts["Text"].region_as_string()`
- `bpy.data.texts["Text"].region_from_string("Replacement")`
Expose the "Connected" mode from the weld modifier in the
"Merge by Distance" geometry node. This method only merges
vertices along existing edges, but it can be much faster
because it doesn't have to build a KD Tree of all selected
points.
Differential Revision: https://developer.blender.org/D14321
Change the modifier name in the modifier stack to "Curvature 3D"
to be consistent with the modifier name in the drop-down.
Differential Revision: https://developer.blender.org/D14476
If all islands had a size of zero, a division by zero would occur in
`GEO_uv_parametrizer_pack`, causing the UV coordinates to be set to
NaN. An alternative approach would be to skip packing islands with a
zero size, but If UV coordinates are for example outside the 0-1 range,
it's better if they get moved into that range.
Differential Revision: https://developer.blender.org/D14522
Set the curve resolution to Bezier and Nurbs curves when converting
data using `curves_to_curve_eval`. This was missed in 9ec12c26f1.
Differential Revision: https://developer.blender.org/D14577
Add "for_write" on function names that retrieve mutable data arrays.
Though this makes function names longer, it's likely worth it because
it allows more easily using the const functions in a non-const context,
and reduces cases of mistakenly retrieving with edit access.
In the long term, this situation might change more if we implement
attributes storage that is accessible directly on `CurvesGeometry`
without duplicating the attribute API on geometry components,
which is currently the rough plan.
Differential Revision: https://developer.blender.org/D14562
Change uses of "Hair" in Render Settings UI in the property editor
and the "Hair Info" node to use the "Curves" name to reflect the
design described in T95355, where hair is just a use case of a more
general curves data type.
While these settings still affect the particle hair system,
the idea is that if we have to choose one naming scheme to align
with, we should choose the option that aligns with future plans
and current development efforts, especially since the particle
system is considered a legacy feature.
A few notes:
- "Principled Hair BSDF" is not affected since it's meant for hair.
- Python API property identifiers are not affected.
Differential Revision: https://developer.blender.org/D14573
The last length value was not initialized, and all length values were
moved one position towards the front of each curve incorrectly.
Also fix an assert when a curve only had a single point.
This revision allows to specify CUDA host compiler (nvcc's -ccbin command
line option) when configuring the build. It addresses the case where the
C/C++ compiler to be used in CUDA toolchain should be different from the
default C/C++ compiler, for instance in case of compilers versions conflicts
or multiple installed compilers.
The new CMake option is named `CUDA_HOST_COMPILER` and can be used as follows:
`cmake -DCUDA_HOST_COMPILER=<path-to-host-compiler>`
If the option is not specified, the build configuration behaves as previously.
Differential Revision: https://developer.blender.org/D14248
When showing an action data-block added to a library overridden object
in the Graph Editor, the visibility toggles would be disabled.
Toggling the visibility should be possible still and works with the
shortcuts, just the button was incorrectly disabled.
Also added the usual disabled hint for the tooltip.
Differential Revision: https://developer.blender.org/D14568
Reviewed by: Bastien Montagne
This commit disables the 'last updated' value (which is the date the
sphinx doc is generated), and instead modifies the 'commit' field from
the 'html_context' data to get:
- a link to the commit itself.
- the date of that commit.
This avoids having the whole documentation detected as changed every
time it is re-generated by the buildbot.
Reviewed By: dfelinto, campbellbarton
Differential Revision: https://developer.blender.org/D14429
Original rework of caches during undo/redo (see D8183) had a very bad
flaw hidden in it: using the key of a ghash as source of data.
While this was effectively working then (cache pointer itself being part
of the key, and said cache pointers not being cleared on file write),
this is a general very bad way to do things.
Now that cache pointers are more and more cleared on file write (as part
of clearing runtime-data to reduce false-positives when checking if an
ID has changed or not), this has to be fixed properly by:
* Not storing the cache pointer itself in the IDCacheKey.
* In undo context, in readfile code trying to preserve caches, store the
cache pointers as values of the mapping, together with the usages counter
The first change potentially affects all usages of
`BKE_idtype_id_foreach_cache`, but in practice this code is only used by
memfile reading code (i.e. undo) currently.
Related to T97015.
Reviewed By: brecht
Maniphest Tasks: T97015
Differential Revision: https://developer.blender.org/D14559
Python exceptions are now shown in the info editor,
this also resolves an old bug where errors were printed twice.
This was originally based on D9752 by @ShadowChaser although many
changes have been made from the original patch.
Details:
- BPy_errors_to_report no longer prints additional output.
- BKE_report_print_test was added so it's possible to check if calling
BKE_report also printed to the stdout.
- Callers to BPy_errors_to_report are responsible for ensuring output
is printed to the stdout/stderr.
- Python exceptions no longer add a trailing newline,
needed to avoid blank-space when displayed in the info-editor.
This avoids script authors using `eval("context.%s" % data_path)`
to access paths starting from the context,
which isn't good practice especially if the data_path isn't trusted.
Now it's possible to resplve paths such as:
context.path_resolve('active_object.modifiers[0].name')
Access the keys of the collection instead of the layers names
and use a set to detect collisions. There is no need to access the
duplicate layers themselves. Roughly twice as fast.
The `BVHCacheType bvh_cache_type` parameter defines specific
`BVHTrees` that cannot be customized.
So it doesn't make sense to pass this value to any
`*bvhtree_from_[...]_ex` function as the `BVHTrees` created in these
cases are custom and cannot be saved in the cache.
This also resulted in a nice cleanup in the code.
Differential Revision: https://developer.blender.org/D14479
In summary the changes are:
- Merge all `bvhtree_from_mesh_*.*_setup_data` in a single utility
- Create `bvhtree_from_editmesh_setup_data`
- Setup data only once in `BKE_bvhtree_from_mesh_get` and `BKE_bvhtree_from_editmesh_get`
Also the behavior of `BKE_bvhtree_from_mesh_get` and
`BKE_bvhtree_from_editmesh_get` changed a bit:
- If a null tree is cached, don't set the `data` to zero. This tree is not an error and the others data can still be used.
- If a null tree is returned, don't set the `data` to zero. Matches the previous change.
Differential Revision: https://developer.blender.org/D14549
color attribute system.
This commit removes sculpt colors from experimental
status and unifies it with vertex colors. It
introduces the concept of "color attributes", which
are any attributes that represents colors. Color
attributes can be represented with byte or floating-point
numbers and can be stored in either vertices or
face corners.
Color attributes share a common namespace
(so you can no longer have a floating-point
sculpt color attribute and a byte vertex color
attribute with the same name).
Note: this commit does not include vertex paint mode,
which is a separate patch, see:
https://developer.blender.org/D14179
Differential Revision: https://developer.blender.org/D12587
Ref D12587
This adds missing cases to detect edit mode for Curves objects.
Unlike other object types, Curves do not have specific edit data,
rather we edit the original data directly, and rely on `Object.mode`.
For this, `BKE_object_data_is_in_editmode` had to be modified to
take a pointer to the object. This affects two places: the outliner
and the dependency graph. For the former place, the object pointer
is readily available, and we can use it. For the latter, the object
pointer is not available, however since it is used to update edit
mode pointers, and since Curves do not have such data, we can
safely pass null to the function here.
This also fixes the assertion failure that happens when closing a file
in edit mode.
Differential Revision: https://developer.blender.org/D14330
Instead of using `CurveEval` to draw the curve wire edges, use
the new `Curves` data-block, which is already built as part of
an object's evaluated geometry set whenever there is a
`CurveComponent`.
This means that we can remove `Curve`'s temporary ownership
of `CurveEval` for drawing (added in 9ec12c26f1),
which caused a memory leak as described in T96498.
In my testing this improved performance by around 1.5x during
viewport playback, back to the performance of 3.1 before the
curve data structure transition started.
The next step of using the GPU to do the final curve evaluation
for the viewport is described in T96455, but is unrelated.
Differential Revision: https://developer.blender.org/D14551
This commit furthers some of the changes that were started in
rBb9febb54a492 and subsequent commits by changing the way surface
objects are presented to render engines and other users of evaluated
objects in the same way. Instead of presenting evaluated surface objects
as an `OB_SURF` object with an evaluated mesh, `OB_SURF` objects
can now have an evaluated geometry set, which uses the same system
as other object types to deal with multi-type evaluated data.
This clarification makes it more obvious that lots of code that dealt
with the `DispList` type isn't used. It wasn't before either, now it's
just *by design*. Over 1100 lines can be removed. The legacy curve
draw cache code is much simpler now too. The idea behind the further
removal of `DispList` is that it's better to focus optimization efforts
on a single mesh data structure.
One expected functional change is that the evaluated mesh from surface
objects can now be used in geometry nodes with the object info node.
Cycles and the OBJ IO tests had to be tweaked to avoid using evaluated
surface objects instead of the newly exposed mesh objects.
Differential Revision: https://developer.blender.org/D14550
Stumbled over the `integrate_surface_volume_only_bounce` kernel
function not returning the right type. The others too showed up as
warnings when building Cycles as a standalone which didn't have
those warnings disabled.
Differential Revision: https://developer.blender.org/D14558
Adds support for linking with some of the dependencies of a USD
build instead of the precompiled libraries from Blender, specifically
OpenSubdiv, OpenVDB and TBB. Other dependencies keep using the
precompiled libraries from Blender, since they are linked statically
anyway so it does't matter as much. Plus they have interdependencies
that are difficult to resolve when only using selected libraries from
the USD build and can't simply assume that USD was built with all
of them.
This patch also makes building the Hydra render delegate via the
standalone repository work and fixes various small issues I ran into
in general on Windows (e.g. the use of both fixed paths and
`find_package` did not seem to work correctly). Building both the
standalone Cycles application and the Hydra render delegate at the
same time is supported now as well (the paths in the USD plugin JSON
file are updated accordingly).
All that needs to be done now to build is to specify a `PXR_ROOT`
or `USD_ROOT` CMake variable pointing to the USD installation,
everything else is taken care of automatically (CMake targets are
loaded from the `pxrTargets.cmake` of USD and linked into the
render delegate and OpenSubdiv, OpenVDB and TBB are replaced
with those from USD when they exist).
Differential Revision: https://developer.blender.org/D14523
This adds a new Grow/Shrink brush which is similar to the Length
brush in the old hair system.
* It's possible to switch between growing and shrinking by hold
down ctrl and/or by changing the direction enum.
* 3d brush is supported.
* Different brush falloffs are supported.
* Supports scaling curves uniformly or shrinking/extrapolating
them. Extrapolation is linear only in this patch.
* A minimum length settings helps to avoid creating zero-sized curves.
Differential Revision: https://developer.blender.org/D14474
Those geometry types are expected to behave the same as e.g. mesh
with respect to data copying. The fact that this was not enabled
already was an oversight in the initial commit that added these types.
Differential Revision: https://developer.blender.org/D14554
Regression in [0] which missed excluding FRAME_CHANGE from
deg_recalc_flags_for_legacy_zero causing all
DEG_id_tag_update(&scene->id, 0) calls to re-calculate animation data.
When this tagging was done in the RNA update function, changing
key-framed values in the UI would be immediate reset to their
keyed-values.
Thanks to Philipp Oeser for finding the root cause.
[0]: 35aedd87e7
This is to improve grammatical consistency with other selection options.
Maniphest Tasks: T96745
Differential Revision: https://developer.blender.org/D14444
Support gizmos for the the action space type based on how it is done for
other types of spaces in Blender (e.g: view3d, image).
See patch submission for sample code.
Reviewed By: campbellbarton, sybren
Ref D13999
Some edit-curve operators used an 'ok' variable to represent
if the selection was found and if a change was made.
Previously it would only return cancel if an error was shown
causing a redundant undo step to be added without a selection.
Since this is simple behavior that shouldn't need much explanation,
use two variables with meaningful names to avoid confusion.
Reviewing D14511 highlighted this issue.
This experimental preference was not making much difference with
selection set to left-mouse for the 3D view and UV editor. Now dragging
the existing selection is possible when this preference is enabled.
Add a new panel called "Tweaks" so we can get feedback from users
about minor tweaks to behavior as exposing these minor changes.
Currently this only has a single item in it, however we may want to
get feedback from users about small changes in the future so I'd
prefer to have a place to list these kinds of options.
Ref D14542
Bug introduced in the smooth function changes done in commit rBd4e1458db3a0e0eaf80219dc8e6d10cb27620793
Differential Revision: https://developer.blender.org/D14548
The internal camera used to render the thumbnails also has to consider
`clip_start` and `clip_end`.
Reviewed By: Severin
Maniphest Tasks: T95678
Differential Revision: https://developer.blender.org/D14138
The legacy Pose Library operators now refer to the "Legacy Pose Library",
and their description mentions they are deprecated and will be removed
from Blender 3.3. The same was added to the `Object.pose_library` RNA
property.
Ref: T93405
The removal of these deprecated properties is tracked in T93406.
Remove much of the old legacy pose library:
- Remove from the Pose & Armature menus.
- Remove from the default keymap.
- Pose Library panel in Armature properties: Add "(legacy)" to title.
- Add note that the functionality of that panel is obsolete, with a
button that opens the manual on the chapter of the new pose library.
- Add button to convert the selected legacy pose library to pose assets.
- The rest of the functionality is greyed out to further communicate
it's been deprecated. It's still functional, though.
Ref: T93405
UV editor used wire color for drawing unselected vertices.
Add color variable to shader, so theme color can be used.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D14373
Add edge panning feature to transform operator. It works in same way as
in node editor, but Y axis is limited by usable range up to 128
channels.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D14310
This only adds a experimental flag to enable the 3d texturing brush,
so future developments could check. Currently the flag does nothing
as no functionality of the 3d texturing brush has been implemented.
ImageTileWrapper is a wrapper around ImageTile to centralize tile calculations when
using CPP. Currentry used by the image engine and will be used for the 3d
texturing brush project.
This patch adds channel region to VSE timeline area for drawing channel
headers. It is synchronizedwith timeline region. 3 basic features are
implemented - channel visibility, locking and name.
Channel data is stored in `SeqTimelineChannel` which can be top-level
owned by `Editing`, or it is owned by meta strip to support nesting.
Strip properties are completely independent and channel properties are
applied on top of particular strip property, thus overriding it.
Implementation is separate from channel regions in other editors. This
is mainly because style and topology is quite different in VSE. But
also code seems to be much more readable this way.
Currently channels use functions similar to VSE timeline to draw
background to provide illusion of transparency, but only for background
and sfra/efra regions.
Great portion of this patch is change from using strip visibility and
lock status to include channel state - this is facilitated by functions
`SEQ_transform_is_locked` and `SEQ_render_is_muted`
Originally this included changes in D14263, but patch was split for
easier review.
Reviewed By: fsiddi, Severin
Differential Revision: https://developer.blender.org/D13836
This takes state of soc-2020-io-performance branch as it was at
e9bbfd0c8c (2021 Oct 31), merges latest master (2022 Apr 4),
adds a bunch of tests, and fixes a bunch of stuff found by said
tests. The fixes are detailed in the differential.
Timings on my machine (Windows, VS2022 release build, AMD Ryzen
5950X 32 threads):
- Rungholt minecraft level (269MB file, 1 mesh): 54.2s -> 14.2s
(memory usage: 7.0GB -> 1.9GB).
- Blender 3.0 splash scene: "I waited for 90 minutes and gave up"
-> 109s. Now, this time is not great, but at least 20% of the
time is spent assigning unique names for the imported objects
(the scene has 24 thousand objects). This is not specific to obj
importer, but rather a general issue across blender overall.
Test suite file updates done in Subversion tests repository.
Reviewed By: @howardt, @sybren
Differential Revision: https://developer.blender.org/D13958
This extracts the inner loops into a separate function.
There are two main reasons for this:
* Allows using `__restrict` to indicate that no other parameter
aliases with the output array. This allows for better optimization.
* Makes it easier to search for the generated assembly code,
especially with the `BLI_NOINLINE`.
Replace 5 arguments with a single struct as the same arguments
are used in many places.
This didn't read well and was confusing with both arguments named
`val` & `value` in the case of WM_modalkeymap_add_item.
Remove the extended version of ED_curve_editnurb_select_pick,
pass the size threshold directly to this function but as the distance in
pixels instead of a multiplier for ED_view3d_select_dist_px.
Using a multiplier is a less direct way to reference the threshold.
This has been broken for two years, since rB29f3af952725,
which retrieved the bounding box from an object and immediately
overwrote it with -1, 1. That commit had another problem though--
the modifier stack shouldn't use object level data, it should use
data from the previous modifier.
Differential Revision: https://developer.blender.org/D14524
Add support for the Curves object to the "Set Origin" and "Apply Object
Tansform" operators. Also change the automatic handle calculation to
avoid adding Bezier attributes if they don't need to be added.
Differential Revision: https://developer.blender.org/D14526
These functions are very simple, but some of them were showing up in
in profiles for curves sculpt mode and various curve nodes. Making sure
they are inlined will allow avoiding the compiler to optimize this logic
much better.
Differential Revision: https://developer.blender.org/D14529
This tool can be used to rapidly edit curves. The current set of
functionalities for Bezier splines are as follows:
The functionalities are divided into three versions of the operator:
* Left-Click
* Ctrl + Left-Click
* Double Click
All current functionalities and their defaults are as follows:
* Extrude Point: Add a point connected to an existing point.
Enabled for Left-Click.
* Extrude Handle Type: Type of the handles of the extruded points.
Can be either Vector or Auto. Defaults to Vector.
* Delete Point: Delete existing point.
Enabled for Ctrl + Left-Click.
* Insert Point: Insert a point into a curve segment.
Enabled for Ctrl + Left-Click.
* Move Segment: Move curve segment.
Enabled for Left-Click.
* Select Point: Select a single point or handle at a time.
Enabled for Left-Click.
* Move point: Move existing points or handles.
Enabled for Left-Click.
* Close Spline: Close spline by clicking the endpoints consecutively.
Defaults to True.
* Close Spline Method: The condition for Close Spline to activate.
Can be one of None, On Press or On Click.
Defaults to On Click for Left-Click and None for the others.
* None: Functionality is turned off.
* On Press: Activate on mouse down.
This makes it possible to move the handles by dragging immediately
after closing the spline.
* On Click: Activate on mouse release.
This makes it possible to avoid triggering the Close Spline
functionality by dragging afterward.
* Toggle Vector: Toggle handle between Vector and Auto handle types.
Enabled for Double Click on a handle.
* Cycle Handle Type: Cycle between all four handle types.
Enabled for Double Click on the middle point of a Bezier point.
The keybindings for the following functionalities can be adjusted from
the modal keymap
* Free-Align Toggle: Toggle between Free and Align handle types.
Defaults to Left Shift. Activated on hold.
* Move Adjacent Handle: Move the closer handle of the adjacent vertex.
Defaults to Left Ctrl. Activated on hold.
* Move Entire: Move the entire point by moving by grabbing on the handle
Defaults to Spacebar. Activated on hold.
* Link Handles: Mirror the movement of one handle onto the other.
Defaults to Right Ctrl. Activated on press.
* Lock Handle Angle: Move the handle along its current angle.
Defaults to Left Alt. Activated on hold.
All the above functionalities, except for Move Segment and
those that work with handles, work similarly in the case of Poly
and NURBS splines.
Reviewed By: HooglyBoogly, weasel, campbellbarton
Differential Revision: http://developer.blender.org/D12155
Moves all `interface_region*` files to C++ except for the tooptip region
which is slightly more complicated. Also move a few other files as well.
This helps to simplify and speed up code, especially through the use
of better C++ data structures. This change builds on all platforms on
the buildbot.
This patch re-adds the shading menu to lights to allow people to use lights in light groups.
This patch also hides all settings in the shading menu that are not useful for the light object.
Reviewed By: lukasstockner97
Maniphest Tasks: T96973
Differential Revision: https://developer.blender.org/D14527
Light groups are a type of pass that only contains lighting from a subset of light sources.
They are created in the View layer, and light sources (lamps, objects with emissive materials
and/or the environment) can be assigned to a group.
Currently, each light group ends up generating its own version of the Combined pass.
In the future, additional types of passes (e.g. shadowcatcher) might be getting their own
per-lightgroup versions.
The lightgroup creation and assignment is not Cycles-specific, so Eevee or external render
engines could make use of it in the future.
Note that Lightgroups are identified by their name - therefore, the name of the Lightgroup
in the View Layer and the name that's set in an object's settings must match for it to be
included.
Currently, changing a Lightgroup's name does not update objects - this is planned for the
future, along with other features such as denoising for light groups and viewing them in
preview renders.
Original patch by Alex Fuller (@mistaed), with some polishing by Lukas Stockner (@lukasstockner97).
Differential Revision: https://developer.blender.org/D12871
Also solves two warnings from the previous similar commit,
f688e3cc31. The change to the grease pencil
modifier is quite suspicious, but doesn't change the behavior,
which was already broken.
This adds support for selective rendering of caustics in shadows of refractive
objects. Example uses are rendering of underwater caustics and eye caustics.
This is based on "Manifold Next Event Estimation", a method developed for
production rendering. The idea is to selectively enable shadow caustics on a
few objects in the scene where they have a big visual impact, without impacting
render performance for the rest of the scene.
The Shadow Caustic option must be manually enabled on light, caustic receiver
and caster objects. For such light paths, the Filter Glossy option will be
ignored and replaced by sharp caustics.
Currently this method has a various limitations:
* Only caustics in shadows of refractive objects work, which means no caustics
from reflection or caustics that outside shadows. Only up to 4 refractive
caustic bounces are supported.
* Caustic caster objects should have smooth normals.
* Not currently support for Metal GPU rendering.
In the future this method may be extended for more general caustics.
TECHNICAL DETAILS
This code adds manifold next event estimation through refractive surface(s) as a
new sampling technique for direct lighting, i.e. finding the point on the
refractive surface(s) along the path to a light sample, which satisfies Fermat's
principle for a given microfacet normal and the path's end points. This
technique involves walking on the "specular manifold" using a pseudo newton
solver. Such a manifold is defined by the specular constraint matrix from the
manifold exploration framework [2]. For each refractive interface, this
constraint is defined by enforcing that the generalized half-vector projection
onto the interface local tangent plane is null. The newton solver guides the
walk by linearizing the manifold locally before reprojecting the linear solution
onto the refractive surface. See paper [1] for more details about the technique
itself and [3] for the half-vector light transport formulation, from which it is
derived.
[1] Manifold Next Event Estimation
Johannes Hanika, Marc Droske, and Luca Fascione. 2015.
Comput. Graph. Forum 34, 4 (July 2015), 87–97.
https://jo.dreggn.org/home/2015_mnee.pdf
[2] Manifold exploration: a Markov Chain Monte Carlo technique for rendering
scenes with difficult specular transport Wenzel Jakob and Steve Marschner.
2012. ACM Trans. Graph. 31, 4, Article 58 (July 2012), 13 pages.
https://www.cs.cornell.edu/projects/manifolds-sg12/
[3] The Natural-Constraint Representation of the Path Space for Efficient
Light Transport Simulation. Anton S. Kaplanyan, Johannes Hanika, and Carsten
Dachsbacher. 2014. ACM Trans. Graph. 33, 4, Article 102 (July 2014), 13 pages.
https://cg.ivd.kit.edu/english/HSLT.php
The code for this samping technique was inserted at the light sampling stage
(direct lighting). If the walk is successful, it turns off path regularization
using a specialized flag in the path state (PATH_MNEE_SUCCESS). This flag tells
the integrator not to blur the brdf roughness further down the path (in a child
ray created from BSDF sampling). In addition, using a cascading mechanism of
flag values, we cull connections to caustic lights for this and children rays,
which should be resolved through MNEE.
This mechanism also cancels the MIS bsdf counter part at the casutic receiver
depth, in essence leaving MNEE as the only sampling technique from receivers
through refractive casters to caustic lights. This choice might not be optimal
when the light gets large wrt to the receiver, though this is usually not when
you want to use MNEE.
This connection culling strategy removes a fair amount of fireflies, at the cost
of introducing a slight bias. Because of the selective nature of the culling
mechanism, reflective caustics still benefit from the native path
regularization, which further removes fireflies on other surfaces (bouncing
light off casters).
Differential Revision: https://developer.blender.org/D13533
With automatic collection previews (810e225c26) and a toggle for
collection instancing (previous commit) supported, there are no known
blocking issues for collection assets. There are still further
improvements to come as part of regular developemt (e.g. bounding box
based snapping).
Makes it possible to toggle instancing via the "Adjust Last Operation"
panel after dropping a collection asset into the viewport.
A design task that puts this into more context is pending still, but
this is a useful option to have either way.
Differential Revision: https://developer.blender.org/D14507
Reviewed by: Bastien Montagne
The Alembic procedural was only enabled during viewport renders
originally because it did not have any caching strategy. Now that
is does, we can allow its usage in final renders.
This also removes the `dag_eval_mode` argument passing to
`ModifierTypeInfo.dependsOnTime` which was originally added to detect if
we are doing a viewport render for enabling the procedural.
Differential Revision: https://developer.blender.org/D14520
This commit moves declarations that depend on `FN_field.hh` out of
`BKE_geometry_set.hh` into `BKE_geometry_fields.hh`. This helps to
reduce the number of areas that need to depend on the functions module,
which recently came in in review of D11591.
In the future we may have a library of standard field inputs in order to
make composing algorithms easier, so it makes sense to have a header
that could contain them and some basic related utilities relating the
concepts of geometry and fields.
Reducing use of unnecessary headers may also reduce compilation time.
Differential Revision: https://developer.blender.org/D14517
This commit adds attribute search the the attribute input field node.
Because it's a field node, finding which attribute to display without
increasing the complexity a lot isn't obvious. In this commit, all
attributes used by nodes in the current group are included.
When an attribute is chosen from the list, the node's data type is
updated, and links connected to the output socket are reconnected.
Ref T96271
Differential Revision: https://developer.blender.org/D14516
This commit ports the "Set Handle Positions" and "Set Hanle Type"
nodes to use the new curves data-block. The nodes become simpler
and likely much faster too, though they're usually not the bottleneck
anyway.
Most of the code is ported from `BezierSpline` directly. The majority
of the complexity comes from the interaction between different
automatically calculated handle types. In comparison `BezierSpline`,
the calculation of auto handles is done eagerly-- mostly because it's
simpler. Eventually lazy calculation might be good to add.
Differential Revision: https://developer.blender.org/D14464
Original report (T96763) only reported the issue of double-space before the texture path, but while adding test coverage I found some other issues that I fixed while at it:
- Incorrectly emits two spaces between `map_Xx` keyword and the texture path, leading to some 3rd party software not finding the textures,
- Emissive texture map (`map_Ke`) was not exported,
- When Mapping node is used on the texture UVs, the "Location" and "Scale" values were mixed up (location written as "scale", scale written as "location).
Added gtest coverage.
Reviewed By: Howard Trickey
Differential Revision: https://developer.blender.org/D14519
PointCache handing is just horrible from RNA, makes dealing with
overrides a nightmare...
Ended up having to add a specific 'apply' callback for the `use_disk_cache`
property, that would explicitely NOT call the the `update` callback of
this property, to avoid having the whole disk cache nuked away...
But the whole thing remains fairly britle, to say the least.
While this is the desired behavior in almost cases, there are a few
hairy nightmares that may require not to do so.
NOTE: this change should should not modify any current behavior at all.
Not really clear why that would only show with multiple caches... But
point cache system is beyond brittle anyway.
This fix solves the issue at two different levels:
* General safety check in `rna_Cache_info_length` that we do get a valid
`pid`.
* Forbid usage of this `PointCache.info` RNA property in any
diffing/LibOverride processing (since it's by definition runtime, volatile
data).
Keep the value slider from clipping through rounded corners for
low values by ensuring the width of the slider rectangle is at least
twice the corner radius.
Reviewed By: Hans Goudey
Differential Revision: https://developer.blender.org/D11474
In Alembic curve topology is stored with an array of values describing
how many points each sub-curve has. Instead of writing the number of
points for the current curve, the Alembic exporter would write the
accumulated number of points.
This error has existed since the initial implementation.
This function was not used for anything other than mat4. This
was because of a limitation of the DRW module/
This makes it cleaner for the GLSL and also less tempting to use
it for other unconventional purpose.
This was caused by the recent changes made to the way we handle matrix
copies. The matrix copy assumed that the uniform iteration was the same
as creation order. But this was far from true. The reality was that
the iterator was reverse for `unichunk` but not for `unichunk->uniforms`
so this was recreating wrong matrix.
I rewrote this part to always use reverse iteration and fix the
copy destination.
Also I simplified the code making the assumption this won't be used for
anything else than mat4.
Adds a dropdown for the Library Overrides display mode that lets users
choose between a "Properties" and a "Hierachies" view mode. The former
is what was previously there (a mode that displays all overridden
properties with buttons to edit the values), the latter is new. It
displays the hierarchical relationships between library overridden
data-blocks. E.g. to override the mesh of an object inside a linked
collection, the entire collection > object > mesh hierarchy needs to be
overridden (whereby the former two will be automatically overridden
using system overrides).
The Hierarchies mode will also show the override hierarchies of
data-blocks that were linked and are overridden in the source file. This
information is useful to have, especially for debugging scenes.
Part of T95802.
Differential Revision: https://developer.blender.org/D14440
Reviewed by: Bastien Montagne
Direct replacement of code:
- memcpy of a single point is done as a shallow_copy() assignment.
- memcpy of a range of points is done with an explicit cast to void*
to tell compiler that we really want to memcpy even a non-trivial
type.
In some cases it seems that memcpy can be used more (points are copied
in a loop). Those left as-is since this is supposed to be a simple
cleanup.
Differential Revision: https://developer.blender.org/D14505
It's better to use some local/stable identifiier to avoid relying on
the data not being freed in between creating the search menu and
the exec function. This is similar to c473b2ce8b.
029cf23d71 changed some icons alignment, but after 9be49a1069
the icons don't align anymore. This commit reverts 029cf23d71 and
also makes a couple of other outliner icons left aligned, instead of
right aligned, for consistency and general alignment.
Differential Revision: https://developer.blender.org/D14501
Add a check to the creation of node groups to remove hidden links
that are connected to the outside of the node group. This avoids
creating sockets in the group's interface that aren't (visibly)
connected to anything within the node group.
Reviewed By: Jacques Lucke, Hans Goudey
Differential Revision: https://developer.blender.org/D14249
This commit makes the dot grid used as background in the node editor
more visually stable when zooming in and out.
The dot grid now uses a continuously subdividing pattern, where
each level of subdivision divides the previous five times, similar to
the line grid in the 3D viewport.
The maximum for the "Grid Levels" theme setting is changed to 3, since
any further subdivisions are too small to be visible.
The "Grid Levels" value for the default themes "Blender Dark" and
"Blender Light" is therefore changed to 3, as well.
Reviewed By: Hans Goudey, Pablo Vazquez
Differential Revision: http://developer.blender.org/D13302
- Metal uniform array compatibility in DRW module.
- Guard OpenGL-specific workarounds and flushes behind GPU_type_matches_ex API guard. Add further render boundaries for render paths called outside of the main loop.
Authored by Apple: Michael Parkin-White
Ref: T96261
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D14438
Skip validation when inserting items into the Win32 "Volumes" list.
This fixes some long hangs when launching Blender with disconnected
network shares.
See D14506 for more details.
Differential Revision: https://developer.blender.org/D14506
Reviewed by Brecht Van Lommel
MSL does not have an implicit global scope, this is emulated via macro's adding an indirection for uniforms, attributes, shader stage inputs and outputs such as:
#define roughness shaderinst->roughness.
Variables in GLSL which exist within uniform blocks can be directly referenced via the global scope, unlike standard C++. This means that variable name pollution occurs if subsequent local variables in the code use the same name, resulting in compilation errors.
A number of these conflicting names have been renamed to ensure unique naming and no further scope pollution.
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D14452
Explicit constructor for mat3 from a mat4 is not valid and cannot be overloaded.
Adding explicit texture resource type flags for depth textures. This is an explicit requirement for Metal Shading language. This is a temporary compatibility, as this path is already supported in GPU_SHADER_CREATE_INFO under ImageType::DEPTH_2D, though required in shader source for MSL shaders which do not have create info.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D14418
This commit re-implements the resample curve node to use the new curves
type instead of CurveEval. The largest changes come from the need to
keep track of offsets into the point attribute arrays, and the fact
that the attributes for all curves are stored in a flat array.
Another difference is that a bit more of the logic is handled by
building of the field network inputs. The idea is to let the field
evaluator handle potential optimizations while making the rest of the
code simpler.
When resampling 1 million small poly curves,the node is about 6
times faster compared to 3.1 on my hardware (500ms to 80ms).
This also adds support for Catmull Rom curve inputs.
Differential Revision: https://developer.blender.org/D14435
The crash happens because the origindex layers created as part of
the modifier stack evaluation are not set in the `MeshRenderData` when
they should have been.
This is because when selecting in X-ray mode, a subdivision wrapper
is created to ensure that selection happens with a subdivided
geometry, and this replaces the `MDATA` wrapper which is also used to
setup the `MeshRenderData`.
As we do not seemingly have an `MDATA` wrapper, the draw code decides
that we can extract draw buffers directly from the BMesh, instead of
the mapped Mesh with origin indices layers.
To fix this, we should also consider to use mapped extraction if a
subdivision wrapper exists on the mesh.
Differential Revision: https://developer.blender.org/D14485
This is because the inheritance is not done before checking if the shader
should be statically compiled. Also some inheritance scheme
might have intermediate permutation that are not compilable.
The recent change to allow a max segments of 1000 in the modifier
causes a lag when dragging or wheeling in the segments box.
This change makes the soft limit back to 100, but you can still
type numbers up to 1000 in the box.
Reviewed By: Howard Trickey
Differential Revision: https://developer.blender.org/D14477
There were multiple issues at hand here:
- The default value has been changed to `{0, 0, 1}` see: rB25f1783673de636a6f0ca4457df8c05bc685981a
- The output needs the subtype set `PROP_DIRECTION`
- The noder properties were missing in `node_composit_set_butfunc`
Fixes T96860
This adds a new operator that converts all selected curves objects
into hair particle systems on their respective surface objects. Existing
particle systems with the correct name are updated, otherwise a new
particle system is added.
The purpose of the operator is the make the new curve sculpting tools
useful even before all functionality is ported over from the old hair system.
The operator can be found in the `Object > Convert` menu in object mode,
when a curves object is active.
Differential Revision: https://developer.blender.org/D14441
When a `GPencilUpdateCacheNode` is created, it always allocates the
`children` pointer. This should not be freed until the whole cache is
deleted.
The `cache_node_update` would free the `children` pointer in a specific
case, causing a double-free later when the cache was removed.
The current behaviour is to prevent multi-user data from having its
transformation applied.
However in some particular cases it is possible to apply them:
* If all the users of the multi-user data are part of the selection.
* If not all the users are in the selection but the selection is made
single-user.
The active object is used as reference to set the transformation of the
other selected objects.
Note: For simplicity sake, this new behaviour is only available if all
the selection is using the same data.
Differential Revision: https://developer.blender.org/D14377
The current behaviour is to prevent multi-user data from having its
modifier applied.
Instead, with this patch, we now warn the user that if they want to
proceed the object will be made single-user.
Note that this only makes the object data single-user. Not the material
or actions.
As a future step we can apply the same behaviour for the Grease Pencil modifiers
Differential Revision: https://developer.blender.org/D14381
While it's useful for click-drag to leave the selection as-is
(when clicking on items that are already selected), it's useful
for a single click to de-select all other elements.
This also removes the need for the initial selection to set the object
as active since this is possible by clicking on it.
Using the evaluated lengths cache from 72d25fa41d, re-implement
the curve parameter node with the new data structure. Conceptually
it works the same way, but the code is restructured and cleaned up
a bit as well. This also adds support for Catmull Rom curves.
Differential Revision: https://developer.blender.org/D14461
The idea that curves with two points cannot be cyclic came from some
existing code, but there's not fundamental reason for it, so remove the
check in this function. The case can be handled elsewhere if necessary.
This commit adds calculation of lengths along the curve for each
evaluated point. This is used for sampling, resampling, the "curve
parameter" node, and potentially more places in the future.
This commit also includes a utility for calculation of uniform samples
in blenlib. It can find evenlyspaced samples along a sequence of points
and use linear interpolation to move data from those points to the
samples. Making the utility more general aligns better with the more
functional approach of the new curves code and makes the behavior
available elsewhere.
A "color math" header is added to allow very basic interpolation
between two colors in the `blender::math` namespace.
Differential Revision: https://developer.blender.org/D14382
Fix small cosmetic issues with the reroute node:
1. Remove special case that allowed curved links to attach vertically.
2. Center align the reroute node's label.
The vertically attached node links could lead to kinks in the otherwise
smooth curves. This would break the visual flow and make the link
potentially intersect the node's label.
The center alignment of the label gives more consistent results for
different label lengths and also reduces the chance of the label
interfering with the node links.
Reviewed By: Hans Goudey, Pablo Vazquez
Differential Revision: D14457
Don't always create a new geometry nodes node tree when adding a
geometry nodes modifier.
This avoids files getting cluttered with empty and unused geometry node
trees that are created every time a nodes modifier is added to an
object - even if only to apply an already existing.
This is also more consistent with other modifiers that also don't
automatically create new data blocks.
The new modifier still automatically gets populated with a new node
tree when adding it via the "New" button in the header of the
geometry nodes editor.
Reviewed By: Hans Goudey, Dalai Felinto, Pablo Vazquez
Differential Revision: D14458
Add new `BKE_id_is_editable` helper in `BKE_lib_id.h`, that supercedes
previous check (simple `ID_IS_LINKED()` macro) for many editing cases.
This allows to also take into account 'system override' (aka
non-editable override) case.
Ref: {T95707}.
'Delete' was a confusing name, even though it would delete the overrides
it would replace them by linked data.
Adding the 'single' version of that operation made it even more
confusing, since often it has to keep the override ID for sakes of
hierarchy, and just reset it and turn it back into a non-editable system
override.
Ref: {T95707}.
Implement default behavior to decide which overrides remain 'system'
ones, and which become 'user editable' ones, when creating hierarchy
override from 3DView or the Outliner.
3DView:
If from an Empty-instanced collection, only Armature objects in
that collection are user overrides.
If from a set of selected objects, all overrides created from selected
objects are user overrides.
Outliner:
All override IDs created from selected elements in the Outliner are user
overrides.
There is one special case: When a collection is selected, and is
'closed' in the outliner, all its inner armature objects are also user
overrides.
Ref: {T95707}.
When creating with hierarchies, core code only generates system
overrides, responsibility to define 'user overrides' is then for the
higher-level calling code (Editor/Operator-level).
do_version code uses fairly basic euristics, should be good enough here
though in most cases. and can always be refined later if needed.
Ref: {T95707}.
The whole liboverride data is still ignored by override diffing etc.,
but some of their flags should be editable (from script and/or advanced
technical/debug UI). So using a weird combination of flags to achieve
this.
Ref: {T95707}.
This merely adds the flag, exposes it in RMA, and uses it in some of the
most common 'is editable' checks (RNA, `BASE_EDITABLE` macro...).
Next step: do_version and defining systemoverrides at creation.
Ref: {T95707}.
The "dupli" system now has a faster, more powerful, and more flexible
alternative with geometry nodes. Since the point cloud objects haven't
been exposed in the non-experimental UI yet, we can remove the dupli
implementation and the panel for the object type.
Differential Revision: https://developer.blender.org/D14482
Adds fading support for build modifier so it's not a hard cut off
Reviewed By: Antonio Vazquez (antoniov), Matias Mendiola (mendio)
Differential Revision: https://developer.blender.org/D14309
The check for the selected status was missing in the case
where the stroke one has one point.
Differential Revision: http://developer.blender.org/D14490
Adds supports for collection previews that are rendered automatically when
collections are marked as assets. (Or when preview rendering is triggered
differently, e.g. through the //Refresh Data-Block Previews// operator).
Idea in this patch is to create a collection instance empty outside of main for
the collection, and then reuse the object rendering code to render the preview.
This keeps things very simple and works just fine.
Differential Revision: https://developer.blender.org/D14460
Reviewed by: Bastien Montagne
Error exposed by ba49345705. Code just assumed that the tree-element
pointed to a real ID, but this is often not the case, and the ID pointer
contains completely different data. E.g. before ba49345705, it would
be a pointer to one of the `Main` listbases, so this code would have
undefined behavior. Now the pointer is null for elements in the "Current
File" element, causing a null-pointer dereference rather than undefined
behavior (that just happened to virtually always result in the intended
code path).
The indirect library data icon was just a grayed out version of the
regular one. This graying out is now done in code, so the icon can be
removed from the SVG. Note that the icon is still defined as
`ICON_LIBRARY_DATA_INDIRECT` (or `LIBRARY_DATA_INDIRECT` in BPY).
The lines paint mask IBO extraction was not implemented for GPU subdivision.
For it to work, we also now need to preserve the subdivision loop to
subdivision edge map, which until now was overwritten to store coarse edges
(the map to coarse edges is still preserved).
Also the paint flag stored in the 4th dimension of the loop normal buffer
was not properly set for flat shaded faces, leading to other kind of
artefacts and render issues.
The problem was when the stroke had less weights that the total number of vertex groups.
The API checked the total number of groups, but this is not required because `BKE_defvert_find_index` returns NULL is the vertex group index does not exist.
If creating partial hierarchy overrides (from the outliner e.g.), that
need to create extra overrides, those could be re-created everytime,
leading to very bad situation where there would be several overrides of
the same reference ID in the same override hierarchy.
This fix makes it so that existing overrides in a given hierarchy will
always be re-used in case other overrides are added to the hierarchy.
Replaces old-style memzero-style of call with zero-initializer.
Allows to shorten typical initialization code to a single line:
Object foo = blender:🧬:shallow_zero_initialize<Object>()
This will allow to more easily convert designated initializer
which is often used to fill object with zeroes to the explicit
function calls:
MyDNAStruct foo = {};
will be translated to
MyDNAStruct foo = blender:🧬:shallow_zero_initialize<MyDNAStruct>();
Differential Revision: https://developer.blender.org/D14486
Previously, those methods would destruct and reconstruct
the data structure. While that was more simple in initial
implementation, it has some downsides which are not resolved:
* Already allocated memory is lost. So new memory would have
to be allocated when the data structure is refilled.
* The clearing process itself was slower because it did unnecessary
work.
This simplifies debugging, and can help improve performance
by making it easier for the compiler.
More optimization might still be possible by using `__restrict` in
a few places.
Regression in [0] which removed a special check when tweak events ended.
Add a similar check for drag events that runs drag is disabled in the
main event handling loop.
[0]: 4986f71848
Since e49bf4019b, animation is handled explicitly. Split operator
wasn't updated.
Re-use backup-duplicate-restore animation functions, that other
operators use for splitting.
Regression in [0] error iterating over pose bones which only used the
active-object, also follow the same logic as edit-mode for using the
local-matrix.
[0]: d052169e7e
Regression in [0], also use pad buffer by 1 instead of 2 which is no
longer needed as the trailing slash is no longer added
after allocating the string.
0682af0d63
This is meant to allow using C++ data structures in this file
as a performance improvement. Particularly `Vector` instead
of `ListBase` for `duplilist`. This changes builds on all
platforms on the buildbot.
This is meant to allow using C++ data structures in this file
as a performance improvement. Particularly `Vector` instead
of `ListBase` for `duplilist`. This change builds and passes
tests on all platforms on the buildbot.
This is meant to allow using C++ data structures in this file
as a performance improvement. Particularly `Vector` instead
of `ListBase` for `duplilist`.
Differential Revision: https://developer.blender.org/D14475
If the `Automatic Constraint` modifier was activated while an axis
constraint was already set, the orientation used would be the default
orientation of the mode and not that of the scene.
This was because the `initSelectConstraint` function was not called in
this case and the `Automatic Constraint` mode was enabled by other
indirect means.
So the solution is to call `initSelectConstraint` in either case and
remove these "indirect means" of enabling `Automatic Constraint`.
Contrary to the initial intention (in rB9916e0193c36), `TREDRAW_SOFT`
flag, when isolated, is not cleared in `transformApply` and therefore is
used in the `drawTransformApply` callback which basically recalculates
the `transformation` which finally clears the flag.
So remove the `drawTransformApply` callback so `transformApply` is not
called when unnecessary.
Differential Revision: https://developer.blender.org/D14430
The solution supposedly listed all cases that `absolute grid snapping`
was supported. But it ignored some occasions like: Editing Surface
objects, Texture Space.
List now only the cases where this feature should not be supported.
The Library Overrides display mode is meant to show overridden
properties from the current file only, not library overrides in
data-blocks that just were linked in. The upcoming Hierarchies view mode
for Library Overrides will also display linked in data-blocks that have
overrides in the source file (but not the individual overridden
properties), see T95802.
This was a mistake in the conditional structure introduced in 4b35d6950d
This commit also adds a new type of snap exclusion: `SNAP_NOT_EDITED`.
Thanks to @Ethan1080 for pointing out the error.
In preparation for supporting packing of UDIM tiled textures, this patch
refactors a small portion of image.cc. The refactor should lead to less
duplicate code now and when Tiled images are added in the near future.
This patch is based on the prior work done for D6492 where it was
requested this part be split and can be summarized as follows:
- `load_sequence_single` is removed and merged with `load_image_single`
- `image_load_sequence_file` is removed and merged with `image_load_image_file`
Reviewed By: lukasstockner97
Differential Revision: https://developer.blender.org/D14327
On Windows/MSVC this gives a minor (~20%) speedup presumably due to a faster float/int formatter. On macOS (Xcode13), this gives a massive speedup, since snprintf that is in system libraries ends up spending almost all the time inside some locale-related mutex lock.
The actual exporter code becomes quite a bit smaller too, since it does not have to do any juggling to support std::string arguments, and the buffer handling code is smaller as well.
Windows (VS2022 release build, Ryzen 5950X 32 threads) timings:
- Blender 3.0 splash scene (2.4GB obj): 4.57s -> 3.86s
- Monkey subdivided level 6 (330MB obj): 1.10s -> 0.99s
macOS (Xcode 13 release build, Apple M1Max) timings:
- Blender 3.0 splash scene (2.4GB obj): 21.03s -> 5.52s
- Monkey subdivided level 6 (330MB obj): 3.28s -> 1.20s
Linux (ThreadRipper 3960X 48 threads) timings:
- Blender 3.0 splash scene (2.4GB obj): 10.10s -> 4.40s
- Monkey subdivided level 6 (330MB obj): 2.16s -> 1.37s
The produced obj/mtl files are identical to before.
Reviewed By: Howard Trickey, Dalai Felinto
Differential Revision: https://developer.blender.org/D13998
so a layer can be occluded by the scene instead of always showing in front
---
{F12827163}
Reviewed By: fclem, antoniov
Differential Revision: https://developer.blender.org/D13931
A user asked for this increase. The performance lags when reaching
the upper limit of this number of segments, but if you need that
many segments, I guess you are willing to wait.
The code that eats away faces until you find input faces in
the Constrained Delaunay Triangulation goes too far and crashes
when there are no input faces. In the test case there were input
faces but they only had two vertices, so were all ignored.
In the Blender File display mode of the Outliner, mouse hovering a
"base" element (e.g. "Objects", "Materials", ...) would also highlight
that same base element in other libraries linked into the scene. In fact
operations like (un)collapsing would be applied to both too.
Issue was that we'd always use the listbase containing the data-blocks
from the current main as a way to identify the tree element. So for the
same data-block types we'd use the same listbase pointers. Instead use
the the library pointer + a per library index.
USD requires to be linked with /WHOLEARCHIVE so
the linker won't remove their static initializers.
This strangely has never worked for MSVC since
the flags were set on the LINK_FLAGS property
which is only used to link .dll and .exe files,
given this is a static lib, the flags were not
used, nor did CMake propagate the link directive
to the final targets that did link. Not quite sure
how this has not lead to more problems in the past.
Setting the link directive on the INTERFACE_LINK_OPTIONS
makes cmake do the right thing.
Differential Revision: https://developer.blender.org/D14394
Reviewed by: sybren
For 3.2 USD will be bumped to a newer version with some
slight API changes, however since we cannot simultaneously
land the libs for all platforms as well as these code changes,
we'll have to support both 21.02 and 21.11+ for at least a
short period of time making the code slightly more messy than
it could have been.
Differential Revision: https://developer.blender.org/D14184
Reviewed by: sybren
In order to allow interpolation of integers with a float, add a separate
template parameter for the factor and multiplication types.
Also move some helper constexpr variables to the "base" header
(reversing the dependency to "base" -> "vector").
This also adds a distance function for scalar types, which is
helpful to allow sharing code between vectors and basic types.
Differential Revision: https://developer.blender.org/D14446
This commit implements generic evaluation for Bezier curves (which is
really just linear interpolation, since attributes are not stored on
Bezier handles). For complete parity with the old curve type, we would
have to add options for this (RNA: `Spline.radius_interpolation`),
but it's not clear that we want to do that.
This also adds a generic `interpolate_to_evaluate` utility on curves
that hides the implementation details. Though there is theoretically
a performance cost to that, without some abstraction calling code
would usually be too complex.
Differential Revision: https://developer.blender.org/D14447
This commit adds a utility that returns an array with the number
of curves of every type. One use case for this is detecting whether
to remove handle or NURBS attributes when changing curve types.
It's best to avoid using this when it's not necessary, but sometimes
it can't really be avoided, and having a utility at least makes using
an optimized version simple.
In the future, this information can be cached in the curves runtime.
Differential Revision: https://developer.blender.org/D14448
This patch makes the grease pencil smooth operation symmetric.
It also increases the performance a lot if strong smoothing is
required. Additionally there is an option for the position smooth
operation to keep the shape closer to the original for more iterations.
Since the result differs from the previous algorithm, versioning is used
to change the iterations and factor to match the old result.
Differential Revision: http://developer.blender.org/D14325
Thanks Jacques for finding solution for deprecation warning
which was generated by GCC for constructor.
The rest of the change is related on fixing memaccess warning
which was happening when memset/memcpy was used directly on
the DNA object pointer. Now there are two utility functions
for this:
- blender:🧬:zero_memory
- blender:🧬:copy_memory
This change makes it possible to add implementation of common
C++ methods for DNA structures which helps ensuring unsafe
operations like shallow copy are done explicitly.
For example, creating a shallow copy used to be:
Object temp_object = *input_object;
In the C++ context it was seen like the temp_object is
properly decoupled from the input object, while in the
reality is it not. Now this code becomes:
Object temp_object = blender:🧬:shallow_copy(*input_object);
The copy and move constructor and assignment operators are
now explicitly disabled.
Other than a more explicit resource management this change
also solves a lot of warnings generated by the implicitly
defined copy constructors w.r.t dealing with deprecated fields.
These warnings were generated by Apple Clang when a shallow
object copy was created via implicitly defined copy constructor.
In order to enable C++ methods for DNA structures a newly added
macro `DNA_DEFINE_CXX_METHODS()` is to be used:
tpyedef struct Object {
DNA_DEFINE_CXX_METHODS(Object)
...
} Object;
For the shallow copy use `blender:🧬:shallow_copy()`.
The implementation of the memcpy is hidden via an internal DNA
function to avoid pulling `string.h` into every DNA header.
This means that the solution does not affect on the headers
dependencies.
---
Ideally `DNA_shallow_copy` would be defined in a more explicit
header, but don;t think we have a suitable one already. Maybe
we can introduce `DNA_access.h` ?
Differential Revision: https://developer.blender.org/D14427
This reverts commit 8c44793228.
Apparently, this generated a lot of warnings in GCC.
Didn't find a quick solution and is it not something I want to be
trading between (more quiet Clang in an expense of less quiet GCC).
Will re-iterate on the patch are re-commit it.
This change makes it possible to add implementation of common
C++ methods for DNA structures which helps ensuring unsafe
operations like shallow copy are done explicitly.
For example, creating a shallow copy used to be:
Object temp_object = *input_object;
In the C++ context it was seen like the temp_object is
properly decoupled from the input object, while in the
reality is it not. Now this code becomes:
Object temp_object = blender:🧬:shallow_copy(*input_object);
The copy and move constructor and assignment operators are
now explicitly disabled.
Other than a more explicit resource management this change
also solves a lot of warnings generated by the implicitly
defined copy constructors w.r.t dealing with deprecated fields.
These warnings were generated by Apple Clang when a shallow
object copy was created via implicitly defined copy constructor.
In order to enable C++ methods for DNA structures a newly added
macro `DNA_DEFINE_CXX_METHODS()` is to be used:
tpyedef struct Object {
DNA_DEFINE_CXX_METHODS(Object)
...
} Object;
For the shallow copy use `blender:🧬:shallow_copy()`.
The implementation of the memcpy is hidden via an internal DNA
function to avoid pulling `string.h` into every DNA header.
This means that the solution does not affect on the headers
dependencies.
---
Ideally `DNA_shallow_copy` would be defined in a more explicit
header, but don;t think we have a suitable one already. Maybe
we can introduce `DNA_access.h` ?
Differential Revision: https://developer.blender.org/D14427
Clear the nurbs basis cache dirty flag when its evaluation finishes.
Remove an incorrect assert that the evaluated size couldn't be zero.
It can, when `check_valid_size_and_order` returns false.
Add a function to retrieve the points for an index range of curves,
and move "ensuring" the offsets to a separate function, since it's
often nicer to call that if you don't need the result span immediately.
When boolean fields are evaluated and used as selections, we create
a vector of indices. This process is currently single-threaded, but
226f0c4fef added a more optimized multi-threaded version
of this process. It's simple to use this in the field evaluator.
I tested this with the set position node and a random
value node set to boolean mode on a Ryzen 2700x:
| | Before | After | Improvement |
| 10% Selected | 40.5 ms | 29.0 ms | 1.4x |
| 90% Selected | 115 ms | 45.3 ms | 2.5x |
In the future there could be a specialized version for non-span
virtual array selections that uses `materialize` to lower virtual
call overhead.
Differential Revision: https://developer.blender.org/D14436
Replace comparisons of FT_Error against 0 with FT_Err_Ok instead.
See D14052 for more details.
Differential Revision: https://developer.blender.org/D14052
Reviewed by Campbell Barton
Currently only supports single image frames (no animation possible).
If quality slider is set to 100 then lossless compression will be used,
otherwise lossy compression is used.
Gives about 35% reduction of filesize save when re-saving splash screens with lossless
compression.
Also saves much faster, up to 15x faster than PNG with a better compression ratio as a plus.
Note, this is currently left disabled until we have WebP libs (see T95206)
For testing precompiled libs can be downloaded from Google:
https://storage.googleapis.com/downloads.webmproject.org/releases/webp/index.html
Differential Revision: https://developer.blender.org/D1598
Each time the user clicks the viewport 2 sets of engine views are
created. Each set is currently composed of 8 view objects, each of size
592 bytes.
Because space is not reserved in the vector that holds them, several
unnecessary re-allocation/copy cycles occur as the vector resizes and
the total allocation load is 8880 bytes. This happens twice.
Reduce to just the allocations necessary and with exactly 4736 bytes
allocated for each set
- Before: 8 allocations and 8 deallocations totaling 17760 bytes
- After: 2 allocations and 2 deallocations totaling 9472 bytes
Reviewed By: fclem, jbakker
Differential Revision: https://developer.blender.org/D13782
In the library overrides mode, in some situations there would be empty
base elements like "Collections" or "Objects". Don't show them, it's
confusing wihout use. Code just failed to consider that case.
All the buttons in the Library Overrides display mode would be shown in cyan,
indicating that they are library overrides. Given that this is solely what this
display mode is about, the indicator is just redundant, confusing (why are the
buttons purple?) and looks weird.
Part of T95802.
Reviewed by: Bastien Montagne
Differential Revision: https://developer.blender.org/D14416
Fix provided by Piotr Makal in patch D14204.
This patch fixes volume grid duplication which was occurring during
importing USD files. This was caused by calling BKE_volume_grid_add
twice per grid (excluding 'density' grid) for the same Volume
object: (1) in USDVolumeReader::read_object_data and (2) later in
BKE_volume_load.
Differential Revision: https://developer.blender.org/D14204
When creating a new window from a duplicated area - by shift-dragging
on corner action zones - on the Windows platform the resulting window
is initially unresponsive. This patch fixes this by releasing the parent
window's mouse capture.
See D14085 for more details.
Differential Revision: https://developer.blender.org/D14085
Reviewed by Ray Molenkamp
There is a dedicated Library Override display mode now, and showing
these elsewhere just adds noise and makes the code problematic to
maintain (since the same element hierarchy will be used in two entirely
different contexts). The corresponding filter settings are removed too.
Part of T95802.
Reviewed by: Bastien Montagne
Differential Revision: https://developer.blender.org/D14411
Instead of having the "Current File" and then the individual libraries
containing indirect library overrides in the Library Overrides display
mode, only show what's in the current file. Agreement was that this
isn't very useful in this view, we may want to add it to the Hierarchy
view though (see T95802).
Part of T95802.
Also expands the top level ID type items ("Objects", "Materials", ...)
by default. See D14410 for details.
Reviewed by: Bastien Montagne
Differential Revision: https://developer.blender.org/D14410
Was a mistake in coordinate handling: need to take possible offset
from the sliding area.
Mouse us still not fully perfectly follows changes of the tilt slide
area, but that is a separate issue.
This new modifier creates a shape known as envelope. It connects all
points that are n points apart. There is also a mode which fits a
single stroke to the envelope shape that is determined by that rule.
For more details, refer to the patch.
Reviewed By: NicksBest, antoniov, frogstomp, mendio
Differential Revision: http://developer.blender.org/D14341
This implements the same interpolation method as for bevel weights
now for vertex and edge creases as well to improve the flexibility.
Differential Revision: http://developer.blender.org/D14170
Essentially, we only allow deletion of hierarchy roots of liboverrides,
when hierarchy deletion option is enabled.
Also add some checking code in the generic, non-object/collection ID
delete code, to prevent any deletion of liboverrides that would be part
of a hierarchy.
Object mode selection does a kind of cycling that excludes the active
selected object. This is separate from regular selection cycling which
is enabled when clicking multiple times without moving the cursor.
This has the down-side that clicking on an object to drag it always
selects the object behind it (in the case of overlapping objects).
Since object mode selection is fundamental functionality, this is
exposed as an experimental preference for user feedback & testing.
See T96752 for details.
In my opinion Scale Thickness feels similar to Only Locations and was missing from the pie menu in grease pencil edit mode, so here I added it.
Differential Revision: https://developer.blender.org/D12530
This patch maximizes the possible bounds for the dash and
gap parameters in the dot dash modifier. This makes e.g.
chopping up lines without gaps possible.
Differential Revision: http://developer.blender.org/D14428
This was already as a preference for the tweak tool,
this preference enables the option for all selection
in the 3D view & UV editor.
This extends on changes from T96544.
Always prioritizing bones caused pose-objects to be selected in object
mode even if they were behind other objects.
Now prioritizing pose bones is limited to pose mode.
When cycling through objects select the nearest first
instead of using the order of object-bases in the view_layer.
This matches how pose selection works.
This is useful to save time manually averaging many timing results.
The minimum is included because often it can be more stable than an
average, and it can help to expose calls from other contexts with lower
times that would make the average useless.
Differential Revision: https://developer.blender.org/D14417
In a test file from T96282, this commit reduces the runtime of the
delete geometry node from 82 ms to 23 ms, a 3.6x improvement.
Writing to vertex groups in other cases should be faster too.
The largest improvement comes from not writing a new weight
of zero if the vertex is not in the group. This mirrors the behavior
of custom data interpolation in `layerInterp_mdeformvert`.
Other improvements come from using `set_all` for writing
output attributes and implementing that method for vertex groups.
I also implemented `materialize` methods. Though I didn't obverse
an improvement from this, I think it's best to remove virtual method
call overhead where it's simple to do so.
The test file for the delete geometry node needs to be updated.
These methods could be parallelized too, but better to do that later.
Differential Revision: https://developer.blender.org/D14420
Rename "size" variables and functions to use "num" instead,
based on T85728 (though this doesn't apply to simple C++
containers, it applies here). Rename "range" to "points" in
some functions, so be more specific.
Differential Revision: https://developer.blender.org/D14431
There are some filenames where the UDIM pattern guessing would fail
unnecessarily. The user can fix these up afterwards but it would be
nicer if they would detect properly in the first place.
Examples:
`test.1001.ver0023.png` would guess wrong since it uses the image
sequence detection code which finds the first sequence from the end. It
would guess `filename.1001.ver<UDIM>.png`
`uv-test.u1_v2.png` would fail detection due to a bug in the processing.
Make this much more reliable and add tests for the most important tile
related get/set/detection functions.
Differential Revision: https://developer.blender.org/D14320
Basic testing on windows only so far. Will need some testing on Linux as well
when the Linux enablement patch is ready.
Does not enable Vega APUs yet (which would be gfx902 or gfx90c).
Differential Revision: https://developer.blender.org/D14432
For render image buffers to be acquired, a lock must be provided. Also
fixed wrong usage of release, it must always be called regardless if the
returned image buffer is NULL.
Explicit template specialization has to happen outside of class
definition (some compilers are more lenient). Since it is not possible to
specialize the method without also specializing the enclosing class for
all of its possible types, the method is moved outside of the class, and
specialized there.
This adds a const qualifier to some code path in the Alembic and USD
importers. More could be added elsewhere. This change is done as it will
be required when GeometrySets are supported and helps keeping diff noise
in the patch to a bare minimum.
ViewMapIO.h is only included in Controller.cpp init_options().
However, g_models_path and g_flags set here are never used elsewhere.
Therefore, ViewMapIO files can be deleted without affecting anything.
Differential Revision: https://developer.blender.org/D14423
Use templates to optimize the CPU texture sampler to interpolate using
float for single component datatypes instead of using float4 for all types.
Differential Revision: https://developer.blender.org/D14424
New supported features:
* 3D/spherical brush that samples a good position on the curves.
* Falloff.
The custom falloff curve mapping is not yet available in the ui because that
requires some more ui reorganization. This is better done when we have
a better understanding of what settings we need exactly.
Currently, the depth of the 3d brush is only sampled once per stroke, when
first pressing LMB. Sometimes it is expected that the depth of the brush can
change within a single brush. However, implementing that in a good way
is not straight forward and might need additional options. Therefore that
will be handled separately. Some experimentation results are in D14376.
Ref T96445.
Differential Revision: https://developer.blender.org/D14376
rBc1909770e7f192574ea62449dd14b4254637e604 introduced "PXR_LIB_PREFIX" for building the
dependencies, so only makes sense to use the same name in the Hydra render delegate CMake too
This patch adds a Hydra render delegate to Cycles, allowing Cycles to be used for rendering
in applications that provide a Hydra viewport. The implementation was written from scratch
against Cycles X, for integration into the Blender repository to make it possible to continue
developing it in step with the rest of Cycles. For this purpose it follows the style of the rest of
the Cycles code and can be built with a CMake option
(`WITH_CYCLES_HYDRA_RENDER_DELEGATE=1`) similar to the existing standalone version
of Cycles.
Since Hydra render delegates need to be built against the exact USD version and other
dependencies as the target application is using, this is intended to be built separate from
Blender (`WITH_BLENDER=0` CMake option) and with support for library versions different
from what Blender is using. As such the CMake build scripts for Windows had to be modified
slightly, so that the Cycles Hydra render delegate can e.g. be built with MSVC 2017 again
even though Blender requires MSVC 2019 now, and it's possible to specify custom paths to
the USD SDK etc. The codebase supports building against the latest USD release 22.03 and all
the way back to USD 20.08 (with some limitations).
Reviewed By: brecht, LazyDodo
Differential Revision: https://developer.blender.org/D14398
If the `Automatic Constraint` modifier was activated while an axis
constraint was already set, the orientation used would be the default
orientation of the mode and not that of the scene.
This was because the `initSelectConstraint` function was not called in
this case and the `Automatic Constraint` mode was enabled by other
indirect means
So the solution is to call `initSelectConstraint` in either case and
remove these "indirect means" of enabling `Automatic Constraint`.
This moves `MOD_meshsequencecache.c` to C++ and fixes compile warnings
introduced from the change. This uses C++ style casts, as well as
`nullptr` instead of `NULL`.
This will allow to output `GeometrySets` from the modifier, which is C++.
Differential Revision: https://developer.blender.org/D13662
This enables the configuration to specify aliases for compatibility with other
configurations.
When a colorspace name is saved in a.blend, that is the alias of a colorspace
in the current configuration, it will show the main colorspace from the
configuration in the user interface and Python API instead.
Loading & saving the .blend file does not make any changes to the stored name,
so as to not make hidden modifications. Only when setting the property again
will the alias name be overwritten by the main colorspace name.
Fixes T96049
Differential Revision: https://developer.blender.org/D14419
The Output Properties > Output panel now has a Color Management subpanel to
override scene settings. When set to Override instead of Follow Scene, there
are settings to:
* For OpenEXR, choose a (linear) colorspace for RGBA passes
* For other file formats, use different display/view/look/exposure/gamma
These settings affect animation render output, image save of renders and the
compositor file output node. Additionally, the image save operator and
compositor file output nodes also support overriding color management.
Includes some layout changes to the relevant panels to accomdate the new
settings and to improve consistency. Ideally subpanels would be used to better
organize these settings, however nodes and operators don't currently support
creating subpanels.
Differential Revision: https://developer.blender.org/D14402
When using GradingPrimaryTransform the generated GLSL code fails to compile. The actual issue is
inside OCIO (https://github.com/AcademySoftwareFoundation/OpenColorIO/issues/1603).
The reason is that unset clamping values are rendered out as `inf`, which isn't recognizable
by GLSL.
The issue is worked around by defining a default for `inf`.
Reviewed By: brecht
Maniphest Tasks: T96502
Differential Revision: https://developer.blender.org/D14425
When converting ghost keys to Blender's event system:
- All keys that aren't part of the GHOST_TKey enum map to EVENT_NONE
(ignored), note that it's an internal error if the value of key isn't
a known value.
- Modify the switch statement so any missing members of GHOST_TKey
warn at compile time (GCC & Clang only).
- GHOST_kKeyUnknown maps to EVT_UNKNOWNKEY.
We could ignore this key, changing can be evaluated separately.
Avoid adding events with their type set to EVENT_NONE as these
can't be categorized usefully (keyboard/mouse/NDOF ... etc),
and add an extra case that needs to be accounted for.
Adding these events seems to be an unintentional change from [0],
these keys used to be ignored in 2.4x.
[0]: a1c8543f2a
This reverts commit e55f4657f7.
It's not intended to support assigning shortcuts to this operator,
which could only work for built-in keying sets caused warnings to be
reported warnings when exporting key-maps.
Prefer D14289, preventing users running into this problem to begin with.
- Follow the same conventions as the 3D viewport for UV selection
(using SelectPick_Params internally).
- Use WM_operator_properties_mouse_select for selection properties.
Vertices were not drawn properly as the logic for mapped mesh was used
in the BMesh case.
Edge display would ignore subdivided edges which would come from coarse
edges when setting display flags.
The checks for calling outliner flushing didn't account for
entering pose mode for the first time or that pose-bone selection
can also change the object selection.
Resolve by recording what changed and refresh accordingly.
Also de-duplicate calls to DEG_id_tag_update.
- Document parameters.
- Add code-comments.
- Remove some historic/unhelpful code-comments.
- Rename argument names that were ambiguous
(object was a boolean for e.g.).
- Move `gpu` picking into an allocated struct which is only
allocated & used when using GPU picking.
- Move variable declarations after menu picking has been handled.
If the mouse is not hovering the window, there is no active region. This is a
valid state, but the UI-list filter operator didn't account for that case.
Tweaks:
- Increase horizontal padding for the buttons from 1 point to 2, looked like an
unintentional placement error before.
Fixes:
- Missing horizontal padding for array buttons
- Small gap between separator line and right column when using a high interface
scale
- Properly center buttons vertically.
The preview does not work well with deferred render result pixels
allocation: it breaks the refresh and requires to toggle current
panels.
Since there is no tiled rendering for previews we don't save any
memory by deferring pixels allocations, so do it for the render
result during the render result creation.
Differential Revision: https://developer.blender.org/D14414
Connecting to some sockets of a few nodes via the drag link search
would fail and trigger an assert, because the picked socket wasn't
available. This was due to some sockets only being available with
certain settings.
This patch fixes these cases by adding the availability conditions of
the socket to the node declaration with the `make_available` method
or manually adding a `node_link_gather_search` function.
Differential Revision: https://developer.blender.org/D14283
Split retrieval of translated text for the "invalid" messages for NURBS
curves from the actual calculation, which is a lower-level function.
Also fixes an issue where "At least two points required" would always
display in the "Active Spline" panel.
Differential Revision: https://developer.blender.org/D14315
A mistake in the mesh normal refactor caused the wrong mesh to
be used when calculating normals with a shape key's deformation.
This commit fixes the normal calculation by using the correct mesh,
with just adjusted vertex positions, and calculating the results
directly into the result arrays when possible. This completely avoids
the need to make a local copy of the mesh, which makes sense,
since the only thing that changes is the vertex positions.
Differential Revision: https://developer.blender.org/D14317
These boolean options are passed as uint, but they would be
easier to understand if using bool.
Differential Revision: https://developer.blender.org/D14405
Currently there is a "calc_face_normal" argument to mesh to bmesh
conversion, but vertex normals had always implicitly inherited whatever
dirty state the mesh input's vertex normals were in. Probably they were
most often assumed to not be dirty, but this was never really correct in
the general case.
Ever since the refactor to move vertex normals out of mesh vertices,
cfa53e0fbe, the copying logic has been explicit: copy the
normals when they are not dirty. But it turns out that more control is
needed, and sometimes normals should be calculated for the resulting
BMesh.
This commit adds an option to the conversion to calculate vertex
normals, true by default. In almost all places except the decimate
and edge split modifiers, I just copied the value of the
"calc_face_normals" argument.
Differential Revision: https://developer.blender.org/D14406
Make a copy of ImageFormatData that contains the effective color management
settings, and pass that along to the various functions. This will make it
possible to add more complex logic later.
For compositing nodes, passing along view and display settings through
many functions made it harder to add additional settings, so just get those
from the scene now.
Differential Revision: https://developer.blender.org/D14401
Metal shading language follows the C++ 14 standard and in some cases requires a greater level of explicitness than GLSL. There are also some small language differences:
- Explicit type-casts (C++ requirements)
- Explicit constant values (C++ requirements, e.g. floating point values using 0.0 instead of 0).
- Metal/OpenGL compatibility paths
- GLSL Function prototypes
- Explicit accessors for vector types when sampling textures.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D14378
Adding WITH_METAL option to CMAKE to guard compilation for macOS only. Implemented stub METALBackend to mirror GPUBackend interface and added capabilities initialisation, along with API initialisation paths.
Global rendering coordination commands added to backend with GPU_render_begin and GPU_render_end() commands globally wrapping GPU work. This is required for Metal to ensure temporary resources are generated within an NSAutoReleasePool and freed accordingly.
Authored by Apple: Michael Parkin-White, Vil Harvey, Marco Giordano, Michael Jones, Morteza Mostajabodaveh, Jason Fielder
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D14293
Caused by rBc0bd240ad0a1.
To avoid crash, make boolean value false if active object data is NULL.
Should be backported to 2.93 LTS and 3.1 corrective releases.
- No need to store is_pose_mode, check the object_mode flag instead.
- Remove redundant pose-mode check which now skips object selection.
- Remove disabled grease pencil cursor toggling,
since I couldn't manage to reproduce a situation where the cursor
failed to update - also, as there are other places the active object
can change this would need a more general solution anyway.
Selecting that opens a menu is now returns early. Handling the menu
selection in-line made this function more difficult to follow.
Also split out selecting an object by it's center into it's own function.
- Rename baseCount to bone_count, was copy-pasted from object code.
- Also rename baseCount to base_count for object selection,
following snake case naming conventions.
- Use int instead of short for counters, as there is no reason to use
short ints.
A 7 year old commit, 2ec00ea0c1, used incorrect indexing for
the optional array of precomputed poly normals. Apparently that code
path was never used, or this issue would have been discovered earlier.
Recent changes calculate normals on a temporary mesh and use those
for the "low-res" layer, meaning the precomputed path was always taken.
Since 3b6ee8cee7, a list of vertex groups cannot be retrieved
from curve objects for merging because curve objects do not support
vertex groups. Previously the empty list on the object was returned.
Only mesh objects are supported for the caps.
Old python exporter in 3.0 and earlier ordered faces by material,
but the new C++ exporter in 3.1+ did not, and was just writing them
in whatever is the order of the mesh data structure.
This mostly does not cause problems, except in some apps e.g.
Procreate -- for large enough meshes, this lack of
"order by material" (which ends up having more usemtl lines)
ends up creating more mesh subsets than necessary inside Procreate.
The change is not computationally heavy, e.g. exporting 6-level
subdivided Monkey mesh goes 1085ms -> 1105ms on my machine.
Reviewed By: @howardt
Differential Revision: https://developer.blender.org/D14368
This adds a new Add brush for the new curves object type in sculpt mode.
The brush is used to insert new curves (typically hair) on the surface object.
Supported features:
* Add single curve exactly at the cursor position when `Add Amount` is 1.
* Front faces only.
* Independent interpolate shape and interpolate length settings.
* Smooth and flat shading affects curve shape interpolation.
* Spherical and projection brush.
This also adds the `surface_triangle_index` and `surface_triangle_coordinate`
attributes. Those store information about what position on the surface each
added curve is attached to:
* `surface_triangle_index` (`int`): Index of the internal triangle that a curve
is attached to. `-1` when the curve is not attached to the surface.
* `surface_triangle_coordinate` (`float2`): First two numbers of a barycentric
coordinate that reference a specific position within the triangle.
Ref T96444.
Differential Revision: https://developer.blender.org/D14340
Also fixes missing code to read/write/free/copy color management settings
in various places. This can't be set through the UI currently, but still
should be handled consistently.
CPU code for cubic interpolation with clip texture extension only performed
texture interpolation inside the range of [0,1]. As a result, even though the
volume's color is sampled using cubic interpolation, the boundary is not
being interpolated. The GPU appears was interpolating samples that span the
clip boundary softening the edge, which the CPU now does also.
This commit also includes refactoring of 2D and 3D texture sampling in
preparation of adding new extension modes.
Differential Revision: https://developer.blender.org/D14295
Allow the user to set an anisotropic filtering setting below the implementation-defined value of `GL_MAX_TEXTURE_MAX_ANISOTROPY_EXT`.
This bug-fix is also needed for 2.93 LTS.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D14392
This patch fixes T96655, bloom crashing Eevee.
The error occurs because rB472fc0c55848b2e2d428cfb4f7debb80a4e12081 added `vec3 safe_color(vec3 c)` to `common_math_lib.glsl`.
However, `vec3 safe_color(vec3 c)` already exists in `effect_bloom_frag.glsl`.
This means `vec3 safe_color(vec3 c)` is duplicated within `common_math_lib.glsl` and `effect_bloom_frag.glsl`.
{F12938060 size=full}
The duplicate code in `effect_bloom_frag.glsl` can be removed since it's no longer needed.
(I checked the remaining methods, there shouldn't be any additional duplicate code)
Reviewed By: fclem
Maniphest Tasks: T96655
Differential Revision: https://developer.blender.org/D14396
Consider switching to rendered shading type as a request to start
rendering, without requiring to un-pause.
This minimizes amount of clicks needed to start rendering after
viewport was paused once, and then shading mode got changed.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D14244
Hello,
I saw that this revision was stalled for a few months so I tried to update it.
https://developer.blender.org/D10995
I added a function that adds a preview on the first connected input of the file output node.
I removed the preview on the single layer format
Thanks
Reviewed By: #compositing, jbakker
Maniphest Tasks: T84815
Differential Revision: https://developer.blender.org/D14219
This is a general issue exposed by moving from tweak to click-drag
events [0], however this bug would have existed for both click &
click-drag events beforehand.
Since [1] the following behavior could occur:
- Click-drag the cursor away from the button.
- Leaving the button would flag it as disabled.
- The disabled button would then break
causing the event to be considered handled.
- Once handled no click / click-drag action would be tested.
The bug would only happen if the cursor left the button before the drag
threshold was reached which tended to happen with an UI-scale 2 or more.
Or with an increased drag threshold.
Revert [1] (fix for T78503), which is no longer needed since as of [2].
[0]: 4986f71848
[1]: 6f96dd8576
[2]: 87c13ac68c
- Use set-style printing of modifier flags instead of booleans.
- Include event.flag.
- Print on a single line (so output can be more easily filtered).
In some cases value of cursor motion events was set from the last event
written to the wmWindow.eventstate. Avoid potential errors by ensuring
cursor motion events always have their value set to KM_NOTHING.
This is patch D14349 from Aras Pranckevicius.
The logic in the code was _completely different_ from the documentation
and what the python exporter in 3.0 did. The new code assumed that
"export material groups" meant "append material name to the object name",
and was only ever kicking in when the "export object groups" option was
also checked. But the proper behavior (as in 3.0 exporter & the online docs),
is to emit g objectname_materialname before each usemtl line. Which is something entirely else.
This is patch D14347 from Aras Pranckevicius.
Instead of scaling "the scene" (i.e. transform vertices by object matrix,
then multiply by scale factor), it was instead first applying the scale
factor in local space, and then transforming by the object matrix.
This is quite a huge cleanup. Making use of the `common_gpencil_lib.glsl`
to share more codes and use more consistent codestyle.
The gpencil engine specifics are now out of the `gpencil_vertex()`
function making it easier to add more features.
There should be no regression as all workarounds are kept as is.
Some C headers might define the typedefs of the enum themselves.
Even if they are guarded by preprocessor `#if`, our enum preprocessor
has no idea of the validity of the statement. So we just bypass
if there is a typedef just before any `enum` keywords.
Note that the typedef matching is quite fragile.
This library contains the needed functions to render GPencil object
geometry. Centralizing these will make it possible for other draw
engines (EEVEE, Overlay) to reuse the same vertex shader code and
possibly the same fragment rejection methods.
This adds a simple and more manageable temp texture behavior.
The texture is garanteed to be available only between the acquire/release pair.
This makes the same engine able to reuse the textures and even overlap the acquire
& release calls.
- Add name support to storage buffers
- Delete view functions for TextureFromPool
- Add support for different size acquire and assert on mulitple acquire
- Allow multiple release
This applies patch D14343 from Aras Pranckevicius, with a description:
The new 3.1+ OBJ exporter did not have correct logic when faced with
non-uniform & mirrored (negative on odd number of axes) object scale:
- Normals were not transformed correctly (should use inverse transpose of the matrix),
and were not normalized,
- Face order was not "flipped" when transform has negative scale on odd number of axes
(visible when using "face orientation" viewport overlay).
When filtering File Browser items by name, use entry's "name" field as
well as the "relpath" field since they can vary.
See D13940 for details.
Differential Revision: https://developer.blender.org/D13940
Reviewed by Bastien Montagne
Windows IME: Fix duplicated initial character when entering numbers
while in Chinese full width character mode.
See D14354 for more details.
Differential Revision: https://developer.blender.org/D14354
Reviewed by Brecht Van Lommel
Previously, the conversion was done manually for a fixed set of types.
Now, there is a more general utility that can be used in other contexts
(outside of geometry nodes attribute processing) as well.
This uses a StorageBuf as the source of indirect dispatch argument.
The user needs to make sure the parameters are in the right order.
There is no support for argument offset for the moment as there is no
need for it. But this might be added in the future.
Note that the indirect buffer is synchronized at the backend level. This is
done for practical reasons and because this feature is almost always used
for GPU driven pipeline.
This is a faster way to clear a buffer instead of reuploading new data.
It is equivalent to `memset` and runs directly on the GPU.
This is better to clear huge buffers and to avoid the sync cost of data upload.
This was getting in the way in multiple instances. Compute shaders dispatch
are still made in the presence of the last bound framebuffer even if they
do not interact with it.
This is supposed to hold the latest improvement from the EEVEE rewrite branch.
Note that a restart is necessary in order for the engine to appear.
The registration code is a bit convoluted as it needs to be after the WM_init.
Add a new operator to the Graph Editor that blends selected keyframes
to their default value.
The operator can be accessed from
Key>Slider Operators>Blend To Default Value
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D9376
Ref: D9367
As the grease pencil simplify is a subotion of general simplify, if the general switch is disabled, the grease pencil simplify must be disabled too.
This patch also disable the UI panel.
Create a function on CurvesGeometry that can also be used for an edit
mode operator in the future. Dealing with CustomData directly means the
code is a bit more verbose than would be ideal, but this would be a
simple thing to clean up in the future if we get an attribute API here.
Also change the reverse node to first work on a read-only geometry
component, and only get write access if there is a curve selected.
Differential Revision: https://developer.blender.org/D14375
This will mostly just remove the overhead of converting
to and from the old curves type, though it also does open
some opportunities for multi-threading in the future.
A mistake in 8538c69921. The offsets include the segment at the
corresponding index, but the evaluated offset calculation was adjusting
the offset for the second to last segment.
Make the new curves' translate and transform functions also affect
the handle position attributes.
Differential Revision: https://developer.blender.org/D14372
Resizing nodes used the cursor location when the event was triggered
instead of the drag-start, harmless but means the drag location isn't
under the cursor especially with a high drag threshold.
Noticed when investigating other drag issues,
unrelated to recent changes to drag behavior.
`RNA_def_struct_ui_text(srna, ...)` was reused for `is_valid` and `is_muted`
which would set the documentation to theirs (actually to that of the last
call).
`RNA_def_property_ui_text(prop, ...)` should be used for the properties.
Remove the conversion to and from `CurveEval` by supporting the
new Curves data-block in the node. This allows for some simplifications
to the code, as well as a fix for transfering curve domain attributes
when duplicating the curve domain.
The performance improvements (obverved through the timings overlay)
can be relatively massive with many curves. When duplicating 10000
4-point curves to become 2 million curves, I observed an approximate
150x improvement, from about 3 seconds to about 20ms.
- Pass less redundant information in function arguments.
- Use `IndexRange` more instead of direct offset calculations.
- Use specific geometry component types for specialized functions.
- Use const arguments.
- Declare variables closer to where they are created or used.
- Remove some redundant logic.
- Simplify the description for the output geometry.
The menu for Timeline > Keying > Active Keying Set wouldn't show up.
Caused by d8e3bcf770. The function to attach search menu data to the button
would be called twice with different arguments for the same button now.
Shouldn't be an issue in general, but the first call now had the unexpected
side effect that the button would get disabled. Make sure it's re-enabled when
the second call sets the proper search data now.
Caused by rB43bc494892c3, moving this 'new id' relink to generic
remapping code added the over-head of proper, generic post-processing,
compared to the special-cases previous code was only designed to handle.
Fortunately with recent 'multi-remapping' work we can easily rewrite
that new id relink code to use the multi-remapping approach too.
No behavioral change is expected from this commit, besides the improved
performances (essentially restored to what they where before
rB43bc494892c3).
Change the sample mode to don't duplicate the last vertex of the
stroke and instead use the cyclic flag to close previously cyclic
strokes. This is necessary for the following modifiers.
Reviewed By: NicksBest
Differential Revision: http://developer.blender.org/D14359
From hair particle mode:
* Add
* Comb
* Cut
* Grow
New:
* Delete
Only comb and delete are used at the moment (by the new tools which are
under experimental).
Selecting an object that was already active & selected would de-select
it when the cursor was over the objects center.
This was caused by [0] that added a check which assumed more than one
hits from GPU_select meant there were multiple objects to select from.
This is not necessarily the case since bones, camera tracks or the
objects own center can add additional hits.
Resolve by keeping track of the best hit with & without the
active-selected object, only using the non-active-selected if it's found.
[0] 1550573360
Support for differentiating the tweak tool from the 3D cursor when
select is set to RMB.
This is currently an experimental preference:
Tweak Tool: Left Mouse Select & Drag
When enabled the tweak tool can now tweak the existing selection
without de-selecting first, a single click can be used to replace
the selection.
This matches selection in the graph & node editors.
This preferences is only available with "Developer Extras" enabled.
Ref T96544.
Needed so mapping selection to click doesn't pass the click event
through to setting the 3D cursor for e.g.
While this doesn't happen with the default key-map, setting selection
to LMB-click would set the 3D cursor as well (when the selection
fell through to nothing).
De-selecting objects meant that selecting a bone would de-select
all the other pose objects - making exiting & entering pose-mode
loose the current set of pose objects.
Match edit-mode behavior: avoid de-selecting objects in the current mode
(unless the action is explicitly performed in the outliner for e.g.).
Previously setting the 'basact' to NULL was done, but this wasn't
so simple to use with deselect_all which needs to check if there was
anything found at the cursor.
Add a 'handled' variable to differentiate this case, when set
don't attempt object selection.
While basic single track selection worked,
toggling and de-selection has been broken since at least 2.83.
Support SelectPick_Params with the exception of deselect_all
which doesn't make sense for tracks as de-selecting all objects
is expected in that case.
This was an involved operation to include inline,
making ed_object_select_pick more difficult to follow.
Prepare for track selection to properly support SelectPick_Params.
Currently this isn't used in the key-map, it will eventually
allow the 3D viewports tweak tool to match the behavior of other
editors that support tweaking a selection without first de-selecting
all other elements.
This is only part of the experimental "Full Frame" mode (disabled
by default). See T88150.
Currently the viewer node uses buffer paddings to display image offset
in the backdrop as a temporal solution implemented for {D12466}.
This solution is inefficient memory and performance-wise. Another
issue is that the paddings are part the image when saved.
This patch instead sets the offset in the Viewer node image
as variables and makes the backdrop take it into account
when drawing the image or any related gizmo.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12750
The previous fix including `<algorithm>` was an improvement
but not the actual error, which appears to be that `int64_t` is
long long int on one platform but just long int on another.
The fix includes the template argument directly.
This patch adds evaluation for NURBS, Bezier, and Catmull Rom
curves for the new `Curves` data-block. The main difference from
the code in `BKE_spline.hh` is that the functionality is not
encapsulated in classes. Instead, each function has arguments
for all of the information it needs. This makes the code more
reusable and removes a bunch of unnecessary complications
for keeping track of state.
NURBS and Bezier evaluation works the same way as existing code.
The Catmull Rom implementation is new, with the basis function
based on Cycles code. All three types have some basic tests.
For NURBS and Catmull Rom curves, evaluating positions is the
same as any generic attribute, so it's implemented by the generic
interpolation to evaluated points. Bezier curves are a bit special,
because the "handle" control points are stored in a separate attribute.
This patch doesn't include generic interpolation to evaluated points
for Bezier curves.
Ref T95942
Differential Revision: https://developer.blender.org/D14284
Similar to other changes to ID remapping, gives huge speedups in some
cases, like certain types of liboverride creation.
Case from {T96092} goes from 1725 seconds (almost 30 minutes) to 45
seconds to generate the liboverride, on my machine.
Reviewed By: jbakker
Maniphest Tasks: T96092
Differential Revision: https://developer.blender.org/D14240
Ever since d5b72fb06c, shader nodes have been in the
`blender::nodes` namespace, so they don't need to use that to access
Blender's C++ types and functions.
Somehow exposed after 943b919fe8, linking could fail because
bf_nodes was not properly configured as a dependency of bf_nodes_shader.
Also add the dependency to the geometry nodes module.
To make porting to other architectures easier, clarifying that this does not
need to be supported. The unused parallel_reduce implementation assumed warp
size 32, but is easy to update if we ever need it in the future.
When using inverted filling and click inside a closed area and not outside as is expected, the algorithm to detect the contour to fill is unable to find the filling shape and try to fill outside of the valid index.
The infinite loop was adding more memory for each loop and the process continued while there was system resources and finally crashed the system.
As the tool in negative mode is designed to fill all areas when you click outside of any shape, now the algorithm check if the outline is not working as expected and cancels the filling process.
This commit removes the implementations of legacy nodes,
their type definitions, and related code that becomes unused.
Now that we have two releases that included the legacy nodes,
there is not much reason to include them still. Removing the
code means refactoring will be easier, and old code doesn't
have to be tested and maintained.
After this commit, the legacy nodes will be undefined in the UI,
so 3.0 or 3.1 should be used to convert files to the fields system.
The net change is 12184 lines removed!
The tooltip for legacy nodes mentioned that we would remove
them before 4.0, which was purposefully a bit vague to allow
us this flexibility. In a poll in a devtalk post showed that the
majority of people were okay with removing the nodes.
https://devtalk.blender.org/t/geometry-nodes-backward-compatibility-poll/20199
Differential Revision: https://developer.blender.org/D14353
Solved by introducing introducing a variant of MEM_cnew which behaves
as a copy-constructor for a trivial types.
Alternative approach would be to surround DNA structs with clang/gcc
diagnostics push/modify/pop so that implicitly defined constructors
and copy operators are allowed to access deprecated fields.
The downside of the DNA approach is that it will require some way to
easily apply diagnostics modifications to many structs, which is not
possible currently.
The newly added MEM_cnew has other good usecases, so is easiest to
use this route, at least for now.
Differential Revision: https://developer.blender.org/D14356
Resolves a fair amount of noisy warnings with default build on macOS.
Tested using render_layer render test which includes Freestyle layer.
Differential Revision: https://developer.blender.org/D14355
Meta-element selection now follows conventions for other picking
functions (e.g. EDBM_select_pick).
- Split meta-element find-nearest into a separate function.
- Cycle the meta-element starting from the active & selected
instead of comparing & setting a static variable.
- Order elements using depth (from front-to-back)
when cycling multiple elements.
Volatile fields were introduced to the RenderResult struct years ago[1].
However, volatile is most likely not doing what it was intended to do
in this instance, and is problematic when moving files to c++ (see
discussion from D13962). There are complex rules around what happens to
these fields but none of them guarantee what the above commit alluded to.
This patch drops the volatile and cleans up the APIs surrounding it.
[1] rB7930c40051ef1b1a26140629cf1299aa89eed859
Passing on all platforms:
https://builder.blender.org/admin/#/builders/18/builds/338
Differential Revision: https://developer.blender.org/D14298
- Rename 'location' to 'mval', typically used for region cursor coords.
- Rename 'retval' to 'changed', typically used for operators
when their return value depends on a change being made.
- Add SelectPick_Params struct to make picking logic more
straightforward and easier to extend.
- Use `eSelectOp` instead of booleans (extend, deselect, toggle)
which were used to represent 4 states (which wasn't obvious).
- Handle deselect_all when pocking instead of view3d_select_exec,
de-duplicate de-selection which was already needed in when replacing
the selection in picking functions.
- Handle outliner update & notifiers in the picking functions
instead of view3d_select_exec.
- Fix particle select deselect_all option which did nothing.
As proposed in T95802, this adds buttons to a new column on the right to modify
the override in the Library Override display mode. Some further usability
improvements are planned. E.g. this does not yet expand collections (modifiers,
constraints, etc) nicely or group modified properties of a modifier together.
Vector properties with more than 3 items or matrices aren't displayed nicely
yet, they are just squeezed into the column. If this actually becomes a problem
there are some ideas to address this.
Differential Revision: https://developer.blender.org/D14268
While the correlation may not work well with adaptive sampling, in practice
this appears to work ok in most cases
Automatic scrambling distance uses the minimum samples from adaptive sampling,
which provides a good default estimate to avoid artifacts.
Contributed by Alaska.
Differential Revision: https://developer.blender.org/D13325
This allows users to type in values larger than 1, for use in conjunction
with automatic scrambling distance.
Contributed by Alaska.
Differential Revision: https://developer.blender.org/D13580
When the light direction is not pointing away from the geometric normal and
there is a shadow terminator offset, self intersection is supposed to occur.
Some old platforms and drivers have limited amount of SSBO binding per
compute shader. This disables GPU subdivision if we cannot possibly
bind all required buffers within this limit.
For now the maximum number of buffers used by the GPU code is hardcoded,
but will be programmatically detected when shader creation is automated.
Ref D14337
This adds detection of the maximum number of shader storage buffer
bindings that is supported on the current platform. This can be
useful to turn off features that require compute shaders but use
more buffer bindings than available.
Differential Revision: https://developer.blender.org/D14337
The performance issue was noticeable when tracking a lot of tracks
which are using keyframe pattern matching. What was happening is that
at some cache gets filled in and the furthest away frame gets removed
from the cache: the frame at marker's keyframe gets removed and needs
to be re-read from disk on the next tracking step.
This change makes it so frames at markers' keyframes are not removed
from cache during tracking.
Steps to easily reproduce:
- Set cache size to 512 Mb.
- Open image sequence in clip editor
- Detect features
- Track all markers
Originally was reported by Rik, thanks!
Modified source Armature ID in the join operation was not properly
tagged as such for the depsgraph (and therefore memfile undo)..
Issue caused/revealed by rBe648e388874a.
Should be backported to 3.1 should we make a corrective release.
After rB9b298cf3dbec, the `StructRNA` declarations can now be accessed via
`RNA prototypes.h`
Also, since all redundated declarations are now removed,
`_WM_MESSAGE_EXTERN_BEGIN` and `_WM_MESSAGE_EXTERN_END` are also no
longer needed.
Differential Revision: https://developer.blender.org/D14342
Caused by 0cb5eae9d0 which restored
support for 3D depth when selecting gizmos - making it difficult
to select single lines drawn in front of other gizmos.
Previously the first hit was always used.
Resolve by using a margin around arrow stems when selecting
which was already done for 2D arrows.
This commit adds three nodes:
- `Remove Attribute`: Removes an attribute with the given name
- `Named Attribute`: A field input node
- `Store Named Attribute`: Puts results of a field in a named attribute
They are added behind a new experimental feature flag, because further
development of attribute search and name dependency visualization will
happen as separate steps.
Ref T91742
Differential Revision: https://developer.blender.org/D12685
So far it was needed to declare a new RNA struct to `RNA_access.h` manually.
Since 9b298cf3db we generate a `RNA_prototypes.h` for RNA property
declarations. Now this also includes the RNA struct declarations, so they don't
have to be added manually anymore.
Differential Revision: https://developer.blender.org/D13862
Reviewed by: brecht, campbellbarton
Lets `makesrna` generate a `RNA_prototypes.h` header with declarations for all
RNA properties. This can be included in regular source files when needing to
reference RNA properties statically.
This solves an issue on MSVC with adding such declarations in functions, like
we used to do. See 800fc17367. Removes any such declarations and the related
FIXME comments.
Reviewed By: campbellbarton, LazyDodo, brecht
Differential Revision: https://developer.blender.org/D13837
This patch remove all duplicate code for the same Bake modifier logic.
Still some modifiers need custom bake functions and cannot use this generic bake.
Steps to reproduce:
- Add image sequence to movie clip editor.
- Set cache limit to a low value in the user preferences.
- Playback until old frames starts to be removed from cache.
- Jump to the beginning of the image sequence.
The reason of dead-lock comes from two factors:
- Due to global nature of the cache limiter calls needs to be
guarded with locks.
- Image buffers stored in the cache can have their own cache
(which is used for color management).
Didn't find a better solution than to use recursive lock.
Kind of makes sense since the thread-guardable resource is
recursive (moviecache can have nested moviecaches).
Differential Revision: https://developer.blender.org/D14331
This reverts commit 1558b270e9.
An earlier commit (rB101fadcf6b93c) introduced some new functionality,
which was overlooked in reviewing this commit & got broken.
Will re-commit after the issue has been fixed.
Ref: D13687
If the scale in the offset modifier was set to a value lower than -1,
the object would get mirrored. The problem was, that the thickness
was set to 0 by that. This fix makes the thickness calculation only
use the absolute values.
Differential Revision: http://developer.blender.org/D14324
For now just assume that a node group without output sockets is
an output node. Ideally, we would use run-time information stored
on the node group itself to determine if the group contains a
top-level output node (e.g. Material Output). That can be
implemented separately.
In the larger scheme of things, top-level outputs within node
groups seem to break the node group abstraction and reusability
a bit.
Correction to the calculation of font size used for the tabs on the
Sidebar so that they are always the same size as other content on the
panel.
See D14322 for more details.
Differential Revision: https://developer.blender.org/D14322
Reviewed by Brecht Van Lommel
Instead of allocating a vector of the basis weights cache for
each evaluated point, allocate a single vector for all of the
weights. This should reduce memory usage by avoiding the
overhead of storing many vectors. I noticed a small performance
improvement to evaluated position calculation with an order of 5,
which is larger than `Vector`'s default inline buffer capacity.
This change is possible because of previous commits that
made the basis cache for each evaluated point always have
the same "order" size.
Currently a single buffer is used as working space for all evaluated
points. In order to make evaluations more independent, opening
options like multi-threading in the future, instead use a separate
array for each call. Using an inline buffer capacity higher than
the default allows a few percent performance improvement, and removes
allocations for every evaluated point.
The step after calculating the NURBS basis for a single evaluated
point trimmed extra zeroes from the weights. However, in practice
this rarely did anything, only for the first and last evaluated point
of certain knot configurations. Remove it in order to simplify code.
Also use a separate span for the result, to clarify its length.
Previously, the popover menu in sculpt/texture paint mode did not
take into account the `UnifiedBrushSettings` for the unit.
To fix this, the behavior of `class _draw_tool_settings_context_mode` is matched
by checking the same conditions when setting up the UI of the right-click popover menu.
Fixes T81616
Reviewed By: #sculpt_paint_texture, pablodp606
Maniphest Tasks: T81616
Differential Revision: https://developer.blender.org/D9168
Label alignment in top bar by using `ui_text_icon_width_ex` instead of `w_hint`
Old:
{F12733743}
New:
{F12733742}
Fixes T61558
Reviewed By: Severin
Maniphest Tasks: T61558
Differential Revision: https://developer.blender.org/D13552
This commit fixes T96229.
The maximum possible radius was being used for 3 point
splines, regardless of the current radius.
Reviewed By: HooglyBoogly
Maniphest Tasks: T96229
Differential Revision: https://developer.blender.org/D14311
When OneDrive files are offline, show preexisting thumbnails.
See D13930 for details.
Differential Revision: https://developer.blender.org/D13930
Reviewed by Julian Eisel
Add the ability to move `CurvesGeometry` without copying its attributes
and data. The benefit is more intuitive management of the data-block
copying, and less overhead for copying in some cases. The "moved-from"
source is left in an empty but valid state. A test file is added to test
the move constructor.
Before this patch, users had to switch render engines just to change how the
hair should be displayed in solid and material preview viewport shading modes.
Differential Revision: https://developer.blender.org/D14290
By not resetting the line width, other scopes were using the
wrong line thickness.
Contributed by RedMser.
Differential Revision: https://developer.blender.org/D12030
My own error when committing 0602852860. It appears that
the "Endpoint" knots modes should be handled together, otherwise
out of bounds array access is possible.
Win32: Replace SHGetFileInfoW as means to get friendly display names
for volumes because it causes long pauses for disconnected remote
drives.
See D14305 for more details.
Differential Revision: https://developer.blender.org/D14305
Reviewed by Brecht Van Lommel
There was an error with the attribute API implementation for vertex
groups. If the vertex group layer referenced an original mesh, it wasn't
properly duplicated for writing.
When rendering using the command line the curvature wasn't rendered. The reason
was that the ui_scale wasn't initialized and therefore the same pixels where
sampled to detect the curvature. This is fixed by setting the ui_scale to 1 for any
image render.
Change early drag evaluation added in
1f1dcf41d5 to only apply to drag events
from mouse buttons. Otherwise pressing two keyboard keys at one would
create a drag event for the first pressed key. While this didn't cause
any bugs as far as I know, this behavior makes most sense for drags
that come from cursor input.
Only set press events in the windows eventstate, not the current event
since it's not useful for these to be set current events press values.
This makes it possible for a press event to access values for the
previous press.
Activating a gizmo used the windows eventstate which may have values
newer than the event used to activate the gizmo.
This meant transforms check for the key that activated transform
could be incorrect.
Support passing an event when calling operators to avoid this problem.
It was possible that a render thread will be freeing cache while the
interface is iterating over cache items to build cache line.
Found while looking into T94738. It might be a fix, but I am unable
to reproduce the original issue, so can not know for sure whether
there is something else going or or not.
This function was copied from txt_sel_to_buf, including unnecessary
complexity to support selection as well as checks for the cursor
which don't make sense when copying the whole buffer.
Use a simple loop to copy all text into the destination buffer.
This patch enables all 8 combinations of Nurbs modes: Cyclic,
Bezier and Endpoint. Also removes restriction on Bezier Nurbs order.
The most significant changes are mode combinations bringing new
meaning. In D13891 is a scheme showing NURBS with same control
points in a modes, and also further description of each possible case.
Differential Revision: https://developer.blender.org/D13891
Regression in 265d97556a.
Where iterating directly on a property group failed, e.g.:
`iter(group)`, tests missed this since only `group.keys()`
was checked.
`3DView`'s `use_snap` option has little or nothing to do with using
snapping in `UV`, `Nodes` or `Sequencer`.
So there are no real advantages to keeping these options in sync.
Therefore, individualize the option to use snap for each "spacetype".
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D13310
The result handle attributes for non-bezier types are zeroed.
By mistake though, the entire array was zeroed, not just the
area corresponding to that curves source.
When viewing meta strip, it had orange color. This was caused by
overflow because of hard-coded offset. Theme got darker, and background
was also set again further in code, but redundant drawing was removed in
f4492629ea.
Realizing and copying attributes of meshes, curves, and points are very
similar processes, but currently the logic is duplicated three times in
the realize instances code. This commit combines the implementation
for copying generic attributes and creating the result id attribute.
The functions for threaded copying and filling should ideally be in
some file elsewhere, since they're not just useful here. But it's not
clear where they would go yet.
Differential Revision: https://developer.blender.org/D14294
Caused by an integer overflow in the tiling utilities of OptiX SDK.
Seems for now it's easier to copy and modify code to our sources so
that we don't need to bump SDK version requirement (which might lead
to an increased driver requirement as well).
There are still some fixes needed from a newer driver to have such
denoising to work properly: Windows requires 511.79, Linux 510.54.
Thanks Patrick for investigation!
Differential Revision: https://developer.blender.org/D14300
Mark the chain length of regular and spline IK constraints
non-animatable. Changing the IK chain length requires a rebuild of
depsgraph relations. This makes it unsuitable for animation. It's better
to simply avoid having this property animatable than to allow animation
but produce unstable results.
Ref: T96203
When dragging with a large threshold (using a tablet for example),
it's possible to press another key before the drag threshold is reached.
So tweaking then pressing X would show the delete popup instead of
transforming along the X-axis.
Now key presses while dragging cause the drag event to be evaluated
before the key press.
Note that to properly base the mouse-move event on the previous
state the last handled event is now stored in the window.
Without this the inserted mouse-move event may contain invalid values
from the next event (it's modifier state or other `prev_*` values).
Requested by @JulienKaspar.
Regression in 08d8eee006 caused
emulate-middle mouse to work once, clearing the modifier key.
Now the modifier key from emulated mouse events is never stored
in the windows event-state.
The realize instances code used "assign", but the attribute buffers on
the result aren't necessarily initialized. This doesn't make a difference
for trivial types like `int`, but it would with more complex types.
This commit replaces the temporary conversion to `CurveEval` with
use of the new curves data-block. The end result is that the
process looks more like the other components-- somewhere in between
meshes and point clouds in terms of complexity.
The final result is that the logic between meshes and curves is
very similar. There are a few different strategies to reduce
duplication here, so I'll investigate that separately.
There is some special behavior for the radius and handle position
attributes. I used the attribute API to store spans of these
attributes temporarily. Using access methods on `CurvesGeometry`
would be reasonable to, storing spans separately feels a bit more
predictable for now though.
There should be significant performance improvements in some cases,
I haven't tested that specifically though.
Differential Revision: https://developer.blender.org/D14247
Passing a `TreeElement *` instead of its `TreeStoreElement *` to
`TSELEM_OPEN()` would seem to work but cause a bug. Add a type check
that will cause a compiler error if it fails.
I don't see a reason to use 2x the element height for the "in-view"
checks. That seems incorrect (although shouldn't cause issues). So
remove that, I don't expect behavior changes.
For whatever reason the "in-view" check was using 2x the element height.
From what I can see this isn't needed, so I'll remove it in a follow-up
commit.
Restrict a lot deletion/moving around of liboverride objects and
collections in the Outliner.
While some of those operations may be valid in some specific cases, in
the vast majority of cases they would just end up breaking override
hierarchies/relationships.
Part of T95708/T95707.
Blender crashes when a multi-user grease pencil object has vertex
groups and is modified by modifiers, layer transform or parenting.
The fix makes sure that we copy the vertex group names list.
Reviewed By: antoniov
Maniphest Tasks: T96233
Differential Revision: https://developer.blender.org/D14275
Fix T95462: Partly transparent objects appear to glow in the dark
The issue was caused by incorrect check for exceeded number
of transparent bounces: the same maximum distance was used
for picking up N closest intersections and counting overall
intersections count.
Now made it so intersection count is using ray distance which
matches the way how Embree and OptiX implementation works.
Benchmark result:
{F12907888}
There is no big time difference in the pabellon scene. The
Victor scene timing doesn't seem to be very reliable as the
variance in time across different benchmark runs is quite
high.
Differential Revision: https://developer.blender.org/D14280
At the time of naming these members only some event types generated
click events so it made some sense to differentiate a click.
Now all buttons support click & drag it's more logical to use the
prefix "prev_press_" as any press event will set these values.
Also update doc-strings.
Operator area_dupli_invoke should not create modal windows.
See D14253 for details.
Differential Revision: https://developer.blender.org/D14253
Reviewed by Brecht Van Lommel
This commit fixes an issue, where for instance, when merging vertices
with the "Merge by Distance" geometry node, the resulting vertices had
their boolean attributes set unpredictably.
Boolean attributes are implemented as custom data, and when welding
vertices, the custom data for the resulting vertices comes from
interpolating the custom data of the source vertices.
This commit implements the missing interpolation function for the
boolean custom data type. This interpolation function is implemented in
terms of the logical or operation, that is to say, if any of the source
vertices (with a weight greater than zero) have the boolean set, the
boolean will also be set on the resulting vertex.
This logic matches 95981c9876.
In geometry nodes, attribute interpolation generally does not use the
CustomData API for performance reasons, but other areas of Blender
still do.
Differential Revision: https://developer.blender.org/D14172
This avoids transform jumping which is a problem when tweaking values a
small amount. A fix for T40549 was made box-select used the location
when the key was pressed.
While it's important for box-select or any operator where it's expected
the drag-start location is used, this is only needed in some cases.
Since the event stores the click location and the current location,
no longer overwrite the events real location. Operators that depend on
using the drag-start can use this location if they need.
In some cases the region relative cursor location (Event.mval) now needs
to be calculated based on the click location.
- Added `WM_event_drag_start_mval` for convenient access to the region
relative drag-start location (for drag events).
- Added `WM_event_drag_start_xy` for window relative coordinates.
- Added Python property Event.mouse_prev_click_x/y
Resolves T93599.
Reviewed By: Severin
Ref D14213
Prevents a few unneeded calls to `std::sin`, with an observed
performance improvement of about 1 percent.
Differential Revision: https://developer.blender.org/D14279
When the geometry of the sculpt mesh was replaced when restoring from
a full undo step, the runtime data was not cleared (including any
normals, triangulation data, or any other cached derived data).
In the report, only the invalid normals were observed.
The fix is to simply clear these caches. Later they will be reallocated
and recalculated if necessary. Since the whole mesh replaced here
anyway, this should be a safe fix.
Differential Revision: https://developer.blender.org/D14282
The new mode only builds the new strokes in each frame.
The code is assuming somebody uses "additive" drawing, so that each frame is different only in its NEW strokes. Already existing strokes are skipped.
I used a simple solution: Count the number of strokes in the previous frame and ignore this many strokes in the current frame.
Differential Revision: https://developer.blender.org/D14252
Tangents are computed from UVs on the CPU side when using GPU subdivision
and require that the normals are available there as well (at least for smooth
shading, flat normals can be computed on the fly). This simply adds the missing
normals update call for the `MeshRenderData` setup for the subdivision case.
Differential Revision: https://developer.blender.org/D14278
Some drivers for legacy platforms seem to have issues with compute
shaders, as revealed by T94936. This disables compute shader for the
known drivers where this issue is present. It is not clear if the issue
is Windows only or not, so this disable them for all operating systems.
See T94936 for a list of configurations where the issue is reproducible
or not.
Differential Revision: https://developer.blender.org/D14264
Sound properties like volume, pitch and muting are handled in
`BKE_sound_add_scene_sound()`. This is unnecessary, because in
properties are then set to real values in `SEQ_edit_update_muting()` and
`seq_update_seq_cb()`.
Alternatively, it may be better to remove all other updates leave them
in `BKE_sound_add_scene_sound()`. But I want to add muting per channel,
whhich is easier and probably cleaner to do with function
`SEQ_edit_update_muting()`.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D14269
Avoid re-creating & freeing the depsgraph for every driver evaluation.
Now the depsgraph is kept in the name-space (matching self),
only re-created when the value changes.
In a contrived test-case with many drivers this gave ~15% overall
speedup for animation playback.
Code cleaning up no-more-needed override data during diffing process
would systematically remove override data from linked IDs.
While this is not a critical issue in theory, it has bad consequences at
the very least on user UI/UX, and potentially can cause bugs in some
corner-cases scenarii.
The exact behavior of the brushes is still being iterated on, but it
helps having a base implementation that we can work upon.
All of that is still hidden behind an experimental feature flag anyway.
The brushes will get a name in the ui soon.
Differential Revision: https://developer.blender.org/D14241
Issue only happens in release builds on windows. That said it was an
actual error in the code. This class is compiled inline in release
builds. When updating multiple textures it would reuse the same memory
to collect the changes. When the previous loaded tilenumber was exactly the
same but from a different image the tile buffer wasn't loaded.
Reviewed By: sergey
Maniphest Tasks: T96213
Differential Revision: https://developer.blender.org/D14274
This part has to be refactored soon anyway, because more types
curves have to be drawn for the new Curves object.
For now, 3 is a better default than 2, because that matches the
actual resolution of the curve currently.
This makes the brushes more smooth, because the brush has an
effect after every mouse move, instead of only every x pixels.
For this to work well, the brushes have to look at the stroke
segments instead of at the mouse positions separately.
A more fine grained check might be added in the future.
Issue was introduced after the python 3.10 switch
Explicit conversion to int will fix the issue.
Same issue is likely to happen with `MovieTrackingSettings.default_search_size`
So I did the same change over there.
Differential Revision: https://developer.blender.org/D14273
Support this for completeness, as it's simpler to support click-drag
for all events types that support press/release instead of having to
document which kinds buttons support click-drag.
In practice this didn't cause a bug since assigning hot-keys was also
checking for "press" events (which NDOF_MOTION doesn't generate).
Add ISNDOF_BUTTON macro which is now used by ISHOTKEY to avoid
problems in the future.
The main improvement is a code simplification, because attributes don't
have to be transferred separately for each curve, and all attributes can
be handled generically. Performance improves significantly when the
output contains many curves. Basic testing with a 2 million curve output
shows an approximate 10x performance improvement.
This fixes the second part of T93573 that 8506f3d9fe didn't
properly address. Specifically, outlines of instances still had the
selected color in edit mode in wireframe view. This change is the
same as that commit, just in a different place.
Differential Revision: https://developer.blender.org/D14229
Previously the labels and values in number fields and value sliders
used different padding for the text. This looks weird when they are
placed underneath each other in a column and, as noted by a comment
in the code of `widget_numslider`, they are actually meant to be
aligned.
This patch fixes that by using the same padding that is used for the
number field for the value slider, as well. This also has the benefit,
that the labels of the value sliders don't shift anymore when adjusting
the corner roundness.
Differential Revision: https://developer.blender.org/D14091
This quick fix will populate the runtime orig pointers to avoid
crashes when a grease pencil object uses layer transforms, parenting
or modifiers.
This will have to be revisited and fixed with a better solution.
Enables image user nodes to display the file alpha mode, similar to the
colorspace setting.
Also removes image_has_alpha in favor of using BKE_image_has_alpha, because it
did not check if the image actually had an alpha channel, just if the file format
was capable of supporting an alpha channel.
Differential Revision: https://developer.blender.org/D14153
An alpha component can be specified for an object's color. This adds an alpha
socket to the object info shader node allowing for the alpha component of the
object's color to be accessed in the shader editor.
Differential Revision: https://developer.blender.org/D14141
Fix crash when creating a pose asset for which the file list entry in
the asset browser is scrolled off-screen. Because of the
off-screen-ness, it wasn't loaded into memory, which eventually caused
an unexpected NULL pointer.
The solution was to use a different function (`filelist_file_find_id`)
that can reliably find the file list entry, after which the cache entry
can be created.
Reviewed by: Severin
Differential Revision: https://developer.blender.org/D14265
When drawing the driver editor, only skip drawing the "scrubbing area"
and not the Y-axis values or the scroll bars.
The issue was introduced in rBb3431a88465db2433b46e1f6426c801125d0047d
to avoid drawing the playhead in the Driver Editor but also prevented
the text on the y axis from being drawn.
Reviewed by: Severin, sybren
Maniphest Tasks: T95531
Differential Revision: https://developer.blender.org/D14022
Fix crash when creating a pose asset for which the file list entry in
the asset browser is scrolled off-screen. Because of the
off-screen-ness, it wasn't loaded into memory, which eventually caused
an unexpected NULL pointer.
The solution was to use a different function (`filelist_file_find_id`)
that can reliably find the file list entry, after which the cache entry
can be created.
Reviewed by: Severin
Differential Revision: https://developer.blender.org/D14265
Fix an assert by commenting out the assert.
In normal situations all keyframes are sorted. However, while keys are
transformed, they may change order and then this assertion no longer
holds. The effect is that the drawing isn't perfect during the
transform; the "constant value" bars aren't updated until the
transformation is confirmed. Apart from that, the code runs fine, so it
seems like a workable workaround.
When drawing the driver editor, only skip drawing the "scrubbing area"
and not the Y-axis values or the scroll bars.
The issue was introduced in rBb3431a88465db2433b46e1f6426c801125d0047d
to avoid drawing the playhead in the Driver Editor but also prevented
the text on the y axis from being drawn.
Reviewed by: Severin, sybren
Maniphest Tasks: T95531
Differential Revision: https://developer.blender.org/D14022
Annotation tool is used as a general mark tool for many add-ons. To be able to detect when an annotation is done is very handy to integrate the annotation tool in add-ons and other studio workflows.
The new callback names are: `annotation_pre` and `annotation_post`
Both callbacks are exposed via the Python module `bpy.app.handlers`
Example use:
```
import bpy
def annotation_starts(gpd):
print("Annotation starts")
def annotation_done(gpd):
print("Annotation done")
bpy.app.handlers.annotation_pre.clear()
bpy.app.handlers.annotation_pre.append(annotation_starts)
bpy.app.handlers.annotation_post.clear()
bpy.app.handlers.annotation_post.append(annotation_done)
```
Note: The handlers are called for any annotation tool, including eraser.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D14221
Using press to activate the Tweak tool doesn't work well when used a
fallback tool as the drag event is often used by the current tool -
making it impossible not to select when dragging (unless the fallback
tool is disabled entirely).
Resolve this by using CLICK events when the Tweak tool is used as a
fallback.
Even though this avoids the crash, check for null-pointer de-reference
since changes to the key-map shouldn't cause operators to crash.
Note that the ability for operators to access a gizmo before it's fully
initialized is a more general problem that should be addressed, but out
of scope for a bug-fix.
Reviewed By: zeddb, JulienKaspar, Severin
Maniphest Tasks: T95591
Ref D14231
When a grease pencil data-block has multiple users and is subject
to modifiers, layer transforms or parenting, performance
(especially playback) is greatly affected.
This was caused by the grease pencil eval process which does per
instance full-copies of the original datablock in case those
kinds of transformations need to be applied.
This commit changes the behavior of the eval process to do shallow
copies (layers with empty frames) of the datablock instead
and duplicates only the visible strokes.
When we need to have a unique eval data
per instance, only copy the strokes of visible
frames to this copy.
Performance:
On a test file with 1350 frames 33k strokes and 480k points
in a single grease pencil object that was instanced 13 times:
- master: 2.8 - 3.3 fps
- patch: 42 - 52 fps
Co-authored by: @filedescriptor
This patch was contributed by The SPA Studios.
Reviewed By: #grease_pencil, pepeland
Differential Revision: https://developer.blender.org/D14238
Regression in d961adb866,
it's important that for the Mesh used for undo storage matches
the shape-key instead of using the coordinates of the Basis key.
Prior to bfdbc78466 a different method of
restoring the basis shape-key coordinates was used (restoring from the
input `Mesh.mvert` array). When undo wrote the edit-mesh into the mesh
this was always NULL so the basis shape keys coordinates were never
used.
Now a parameter has been added so undo can use the active shape for the
meshes vertex coordinates.
Reviewed By: sergey
Maniphest Tasks: T96205
Ref D14258
Undo would invalidate image owned GPU textures only. Textures
that are owned by the editor were not refreshed. This patch would
invalidate all the GPU textures by marking the whole image dirty.
This can be improved later as we could add partial updates of GPU
textures.
Reviewed By: mont29
Maniphest Tasks: T96163
Differential Revision: https://developer.blender.org/D14259
Caused by oversight in 2bcf93bbbe. Operator returns `OPERATOR_CANCELLED`
when it should return `OPERATOR_FINISHED`.
Reviewed By: mano-wii, campbellbarton
Differential Revision: https://developer.blender.org/D14243
The "curve_type" was transferred to instances because it isn't a
built-in curve attribute. Then it was interpolated as a point
domain attribute from the instance domain in the realize
instances node.
The fix was just missing from 9ec12c26f1.
`curve_type` needs to be marked as a built-in attribute.
Support drag/drop of materials to Properties Material Slots.
See D13549 for more details.
Differential Revision: https://developer.blender.org/D13549
Reviewed by Julian Eisel
The node should be faster than in 3.1, for a few reasons:
- It doesn't need to calculate and allocate the curve offsets.
- It doesn't need to de-reference a pointer for each curve.
- The inputs are accessed from the virual arrays fewer times.
On top of that, I added two other performance improvements:
- The node is multi-threaded when there are many curves.
- There are generated special cases for single value and span inputs.
**Performance**
With a set position node affecting 1 million splines with a selection
based on this node, on an Intel i5 8250U (times are approximate):
| Before | After | Speedup |
| 760 ms | 60 ms | 13x |
Differential Revision: https://developer.blender.org/D14233
When removing a modifier, changing the layer transform or updating
the parent of a grease pencil object that has a multi-user datablock
and animation data, the eval data is not updated properly (after a
frame change). This can also cause memory leaks.
The fix makes sure that we free and reset any runtime copy
(`ob->runtime.gpd_eval`) in `BKE_gpencil_prepare_eval_data`.
Note: As far as we can tell, `ob->runtime.gpd_orig` is unused and could
be removed. The assignment in `BKE_gpencil_prepare_eval_data`
seemed to be unnecessary.
Co-authored-by: @yann-lty
Reviewed By: antoniov
Maniphest Tasks: T96145
Differential Revision: https://developer.blender.org/D14236
Previously you'd have to be careful to drag the image itself. Dragging
anywhere else on the tile (e.g. between the preview and the text, or the
text itself) would trigger border select. This often conflicts with user
expectations and causes frustration when trying to work quick, I've seen
many people complain about this.
Note that the "hitbox" for dragging is a bit smaller than the tile, to
not make border select by dragging from in-between the tiles too hard.
Differential Revision: https://developer.blender.org/D14228
Just use the image-buffer size and the already provided scale to
determine the size, not the button size (which would always have to
match the scaled image-buffer size or it would give unexpected results).
This patch adds edge selection support for UV editing (refer T76545).
Developed as a part of GSoC 2021 project - UV Editor Improvements.
Previously, selections in the UV editor always flushed down to vertices
and this caused multiple issues such as T76343, T78757 and T26676.
This patch fixes that by adding edge selection support for all UV
operators and adding support for flushing selections between vertices
and edges. Updating UV select modes is now done using a separate
operator, which also handles select mode flushing and undo for UV
select modes. Drawing edges (in UV edge mode) is also updated to match
the edit-mesh display in the 3D viewport.
Notes on technical changes made with this patch:
* MLOOPUV_EDGESEL flag is restored (was removed in rB9fa29fe7652a).
* Support for flushing selection between vertices and edges.
* Restored the BMLoopUV.select_edge boolean in the Python API.
* New operator to update UV select modes and flushing.
* UV select mode is now part of editmesh undo.
TODOs added with this patch:
* Edge support for shortest path operator (currently uses vertex path logic).
* Change default theme color instead of reducing contrast with edge-select.
* Proper UV element selections for Reveal Hidden operator.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12028
Just showing the library override icon for every item doesn't add much
information, it's just redundant. Displaying the data-block type icon on
the other hand can be useful.
Differential Revision: https://developer.blender.org/D14208
This patch adds a button in the scene to add a new one, but this does not change to the new created scene because this breaks the storyboarding workflow.
This is a common request for Storyboarding artists.
Reviewed By: mendio, brecht, ISS
Differential Revision: https://developer.blender.org/D14148
When exiting edit-mode set the vertex coordinates to the basis-shape when editing non-basis keys.
Regression in bfdbc78466.
Reviewed By: sergey
Ref D14234
This is needed since 4d0f846b93
however change in the operator instead of the event handler is correct,
as accepting a press event should suppress drag events unless
the pass-through flag is set.
This is how select & tweak already works.
It's not useful to wrap vertical motion when dragging markers.
It was too easy to accidentally wrap the cursor to the top of a region,
as markers need to be dragged from the bottom edge of the region.
The logic to cycle selected markers wasn't cycling back to the beginning
of the list.
The marker after the selected marker at the cursor frame was also used
to check if a selection existed, causing dragging to transform all
selected markers to de-select all when when dragging the last marker.
The node unnecessarily converted to the old data structure to check if
there were any poly splines. Instead, that warning is just removed,
because the node now still sets resolution values in that case, they
just aren't used (before the values weren't set at all). Either way, it
wasn't clear that looping though all of the curve types was worth
the performance cost here.
In `ffmpeg_read_video_frame` fix assignment used as truth value.
In `ffmpeg_seek_recover_stream_position` loop while return value is
greater or equal to 0.
Passing around coordinates for drawing can be quite confusing, it's
often not clear what they represent and where they are currently.
Instead pass around the tile rectangle for drawing and let all code draw
based on that, it's way more clear that way.
Changes shouldn't be user visible.
Correct misspellings in code comments of "vertex" and "vertices".
See D13932 for more details.
Differential Revision: https://developer.blender.org/D13932
Reviewed by Harley Acheson
This adds a prototype for the first brush that can add new curves by
painting on a surface. Note that this can only be used when the curves
object has a surface object set in the properties panel.
The brush can take minimum distance into account. This allows
distributing curves with a somewhat consistent density.
Differential Revision: https://developer.blender.org/D14207
This commit removes the outline from instances generated from an object
when in edit mode. This takes the change in aa13c4b386 a bit further,
with the idea that instance outlines are more like regular outlines.
Because evaluated object data that doesn't match the original object
type is treated as an instance internally, this fixes the way evaluated
meshes for curves objects have an outline, for example.
See the differential revision for a visual comparison.
Differential Revision: https://developer.blender.org/D14226
This patch enables enables the outliner to use the correct icon for each
of the curve subtypes (Curve/Surface/Font).
Differential Revision: https://developer.blender.org/D14093
Reviewed by: Julian Eisel
Since removal of tweak events 4986f71848,
box-select is activating while dragging files.
As far as I can tell this used to work because of differences
int the order tweak / click-drag events are handled.
Apply a workaround since dragging files doesn't prevent other parts
of the UI from activated (it's possible to open menus for e.g),
this is something we will likely want to limit which would resolve
this bug too.
There are two issues revealed in the bug report:
- the GPU subdivision does not support meshes with only loose geometry
- the loose geometry is not subdivided
For the first case, checks are added to ensure we still fill the
buffers with loose geometry even if no polygons are present.
For the second case, this adds
`BKE_subdiv_mesh_interpolate_position_on_edge` which encapsulates the
loose vertex interpolation mechanism previously found in
`subdiv_mesh_vertex_of_loose_edge`.
The subdivided loose geometry is stored in a new specific data structure
`DRWSubdivLooseGeom` so as to not pollute `MeshExtractLooseGeom`. These
structures store the corresponding coarse element data, which will be
used for filling GPU buffers appropriately.
Differential Revision: https://developer.blender.org/D14171
Partially revert aa71414dfc
This attempted have the click-drag event compatible with old tweak
events, but needs to be re-thought since it caused events to be handled
in unexpected situations.
This utility is useful when using C types that own some resource in
a C++ file. It mainly helps in functions that have multiple return
statements, but also simplifies code by moving construction and
destruction closer together.
Differential Revision: https://developer.blender.org/D14215
This fix contains two parts. There was one critical mistake where
order of two indices was wrong when removing constraint planes from
the array. The other changes are improvements to the used thresholds
to keep everything numerically stable.
Differential Revision: http://developer.blender.org/D14183
This branch was previously run when the action had been handled,
since action checks were removed it was running. This assignment
does nothing but shouldn't be kept.
previously_visible_components_mask was not preserved for Image ID nodes, which
meant it was always detected as newly visible and tagged to be updated, which
in turn caused the geometry nodes using it to be always updated also.
Reviewed By: sergey, JacquesLucke
Maniphest Tasks: T94609
Differential Revision: https://developer.blender.org/D14217
Supporting two kinds of dragging is redundant, remove tweak events as
they only supported 3 mouse buttons and added complexity from using the
'value' to store directions.
Support only click-drag events (KM_CLICK_DRAG) which can be used with
any keyboard or mouse button.
Details:
- A "direction" member has been added to keymap items and events which
can be used when the event value is set to KM_CLICK_DRAG.
- Keymap items are version patched.
- Loading older key-maps are also updated.
- Currently the key-maps stored in ./release/scripts/presets/keyconfig/
still reference tweak events & need updating. For now they are updated
on load.
Note that in general this wont impact add-ons as modal operators don't
receive tweak events.
Reviewed By: brecht
Ref D14214
Clicking and dragging markers accumulates flags from multiple operators
in a way that can't be interpreted when combine.
Follow tweak behavior for cancelling click-drag events.
Replacing tweak key-map items with click-drag caused selection
in the graph/sequencer/node editors to ignore drag events
(all uses of WM_generic_select_modal).
Operators that return OPERATOR_PASS_THROUGH | OPERATOR_FINISHED
result in the event loop considering the event as being handled.
This stopped WM_CLICK_DRAG events from being generated which is not the
case for tweak events.
As click-drag is intended to be compatible with tweak events,
accept drag events when WM_HANDLER_BREAK isn't set or when
wm_action_not_handled returns true.
A simple case of missing the tangent VBO. The tangents are computed from
the coarse mesh, and interpolated on the GPU for the final mesh. Code for
initializing the tangents, and the vertex format for the VBO was
factored out of the coarse extraction routine, to be shared with the
subdivision routine.
Last step of proxy building caused crash due to thread race contition
when acessing ed->seqbase.
Looking at code, it seems that calling IMB_close_anim_proxies on
original strips is unnecessary so this code was removed to resolve this
issue.
Locking seqbase data may be possible, but it's not very practical as
many functions access this data on demand which can easily cause
program to freeze.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D14210
Mousemove events are sent to windows.
In Windows OS, almost all mousemove events are sent to the window whose
mouse cursor is over.
On MacOS, the window with mousemove events is always the active window.
It doesn't matter if the mouse cursor is inside or outside the window.
So, in order for non-active windows to also have events,
`WM_window_find_under_cursor` is called to find those windows and send
the same events.
The problem is that to find the window, `WM_window_find_under_cursor`
only has the mouse coordinates available, it doesn't differentiate
which monitor these coordinates came from.
So the mouse on one monitor may incorrectly send events to a window on
another monitor.
The solution used is to use a native API on Mac to detect the window
under the cursor.
For Windows and Linux nothing has changed.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D14197
The subdivision modifier for Grease Pencil handles closed strokes
correctly now and does converge to the same shape as the mesh
subdivision surface.
Differential Revision: http://developer.blender.org/D14218
Create `Curves` directly, instead of using the conversion from
`CurveEval`. This means that the `tilt` and `radius` attributes
don't need to be allocated. The old behavior is kept by using the
right defaults in the conversion to `CurveEval` later on.
The Bezier segment primitive isn't ported yet, because functions
to provide easy access to built-in attributes used for Bezier curves
haven't been added yet.
Differential Revision: https://developer.blender.org/D14212
Currently, any time a Curves data-block is created, the `curves_random`
function runs, filling it with 500 random curves, also adding a radius
attribute. This is just left over from the prototype in the initial
commit that added the type.
This commit moves the code that creates the random data to the curve
editors module, like the other primitives are organized.
Differential Revision: https://developer.blender.org/D14211
This patch hides the MetalRT checkbox for AMD GPUs, pending fixes for MetalRT argument encoding on AMD.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D14175
The issue was uncovered by the 0f89bcdbeb, but the root cause goes
into a much earlier design violation happened in the code: the modifier
evaluation function is modifying input mesh, which is not something
what is ever expected.
Bring code closer to the older state where such modification is only
done for the object in edit mode.
---
From own tests works seems to work fine, but extra eyes and testing
is needed.
Differential Revision: https://developer.blender.org/D14191
db4313610c added support for modifier
keys to be released while dragging.
The key release events set wmEvent.prev_type which is used select the
drag threshold, causing the wrong threshold to be used.
Add wmEvent.prev_click_type which is only set when the drag begins.
The image engine is depth aware when using tile drawing the depth is
only updated for the central image what lead to showing the background
on top of other areas.
Also makes sure that switching the tile drawing would lead to an update
of the texture slots.
When dimension of images aren't a multifold of 256 parts of the gpu
textures are not updated. This patch will calculate the correct part of
the image that needs to be reuploaded.
Internally the update tiles are 256x256. Due to some miscalculations
tiles were not generated correctly if the dimension of the image wasn't
a multifold of 256.
Previously we used to cache a float image representation of the image in
rect_float. This adds some incorrect behavior as many areas only expect
one of these buffers to be used.
This patch stores float buffers inside the image engine. This is done per
instance. In the future we should consider making a global cache.
Use a flag for events to avoid adding struct members every time a new
kind of tag is needed - so events remain small.
This also simplifies copying settings as flags can be copied at once
with a mask.
- Rename ED_view3d_win_to_delta `mval` argument to `xy_delta` as it
as it was misleading since this is an screen-space offset not a region
relative cursor position (typical use of the name `mval`).
Also rename the variable passed to this function which also used the
term `mval` in many places.
- Re-order the output argument of ED_view3d_win_to_delta last.
use an r_ prefix for return arguments.
- Document how the `zfac` argument is intended to be used.
- Split ED_view3d_calc_zfac into two functions as the `r_flip` argument
was only used in some special cases.
Small fixes to the drawing of multi input sockets:
- Make the outline thickness consistent with normal node sockets,
independent from the screen DPI.
- Only highlight multi input sockets when they are actually selected.
- Skip selected multi inputs when drawing normal selected sockets.
Differential Revision: https://developer.blender.org/D14192
Currently the code expects the radius attribuet to always exist on the
input Curves. This won't be true in the future though, so the correct
default value of one should be used when creating the data on CurveEval,
where the data is not optional.
This commit improves the drawing of selected node links:
- Highlight the entire link to make it easier to spot where the link
is going/coming from.
- Always draw selected links on top, so they are always clearly
visible.
- Don't fade selected node links when the sockets they are connected
to are out out view.
- Dragged node links still get a partial highlight when they are only
attached to one socket.
Differential Revision: https://developer.blender.org/D11930
Add a std::move in some places to prevent arrays from being copied.
These cases were potentially optimized by the compiler, but this makes
it more explicit.
Differential Revision: https://developer.blender.org/D14129
New code from the vertex normal refactor cfa53e0fbe combined with older code
from 592759e3d6 that disabled instancing for custom normals and autosmooth
meant that instancing was always disabled.
However we do not need to disable instancing for custom normals and autosmooth
at all, this can be shared between instances just fine.
The constraint operators for delete, apply, copy and copy to selected
were missing null checks and could crash blender when called wrongly
from the python api.
Differential Revision: http://developer.blender.org/D14195
This commit changes `CurveComponent` to store the new curve
type by adding conversions to and from `CurveEval` in most nodes.
This will temporarily make performance of curves in geometry nodes
much worse, but as functionality is implemented for the new type
and it is used in more places, performance will become better than
before.
We still use `CurveEval` for drawing curves, because the new `Curves`
data-block has no evaluated points yet. So the `Curve` ID is still
generated for rendering in the same way as before. It's also still
needed for drawing curve object edit mode overlays.
The old curve component isn't removed yet, because it is still used
to implement the conversions to and from `CurveEval`.
A few more attributes are added to make this possible:
- `nurbs_weight`: The weight for each control point on NURBS curves.
- `nurbs_order`: The order of the NURBS curve
- `knots_mode`: Necessary for conversion, not defined yet.
- `handle_type_{left/right}`: An 8 bit integer attribute.
Differential Revision: https://developer.blender.org/D14145
The UI context was only set for the operator polls, but not for the
drop-box polls. Initially I thought this wouldn't be needed since the
drop-boxes should leave up context polls to the operator, but in
practice that may not be what API users expect. Plus the tooltip for the
drop-boxes will likely have to access context anyway, so they should be
able to check it beforehand.
Motion paths can now be initialised to more sensible frame ranges,
rather than simply 1-250:
- Scene Frame Range
- Selected Keyframes
- All Keyframes
The Motion Paths operators are now also added to the Object context menu
and the Dopesheet context menu.
The scene range operator was removed, because the operators now
automatically find the range when baking the motion paths.
The clear operator now appears separated in "Selected Only" and "All",
because it was not clear for the user what the button was doing.
Reviewed By: sybren, looch
Maniphest Tasks: T93047
Differential Revision: https://developer.blender.org/D13687
Caused by 0f89bcdbeb and was not fully addressed by 6f9828289f:
tagging an ID with flag 0 is to be seen as an explicit tag for copy
on write.
Would be nice to either consolidate code paths of flag 0 and explicit
component tag, or get rid of tagging with 0 flag, but that is above of
what we can do for the upcoming release.
When using ancored stroked the diameter of the stroke can be 0 what
leads to a division by zero that on certain platforms wrap to a large
negative number that cannot be looked up. This fix will clamp the size
of the brush to 1.
Now drag & tweak can have modifier keys to be released while dragging.
without this, modifier keys needs to be held which is more noticeable
for tablet input or whenever the drag threshold is set to a large value.
Resolves T89989.
This fixes T93051, T76405 and maybe others.
Characters like '²', '<' are not recognized in Blender's shortcut keys.
And sometimes simple buttons like {key .} and {key /} on the Windows
keyboard, although the symbol is "known", Blender also doesn't
detect for shortcuts.
For Windows, some of the symbols represented by `VK_OEM_[1-8]` values,
depending on the language, are not mapped by Blender.
On Mac there is a fallback reading the "actual character value of the
'remappable' keys". But sometimes the character is not mapped either.
On Windows, the solution now mimics the Mac and tries to read the button's
character as a fallback.
For unmapped characters ('²', '<', '\''), now another value is chosen as a
substitute.
More "substitutes" may be added over time.
Differential Revision: https://developer.blender.org/D14149
Some logic and comments in the vertex normal calculation were
left over from when normals were stored in MVert, before
cfa53e0fbe. Normals are never allocated and freed
locally anymore.
In some cases, the normal edit modifier calculated the normals on one
mesh with the "ensure" functions, then copied the mesh and retrieved
the layers "for write" on the copy. Since 59343ee162, normal
layers are never copied, and normals are allocated with malloc instead
of calloc, so the mutable memory was uninitialized.
Fix by calculating normals on the correct mesh, and also add a warning
to the "for write" functions in the header.
The check to see if newly requested attributes are not already in the
cache was not taking into account the possibility that we do not have
new requested attributes (`num_requests == 0`). In this case, if
`attr_used` already had attributes, but `attr_requested` is empty, we
would consider the cache as dirty, and needlessly rebuild the attribute
VBOs.
These features are complicated to support on GPU and hardly compatible
with subdivision in the first place. In the future, with T68891 and
T68893, subdivision and custom smooth shading will be separate workflows.
For now, and to better prepare for this future (although long term
plan), we should discourage workflows mixing subdivision and custom
smooth normals, and as such, this disables GPU subdivision when
autosmoothing or custom split normals are used.
This also adds a message in the modifier's UI to indicate that GPU
subdivision will be disabled if autosmooth or custom split normals are
used on the mesh.
Differential Revision: https://developer.blender.org/D14194
Reuse the same vertex normals calculation as for the GPU code, by
weighing each vertex normals by the angle of the edges incident to the
vertex on the face.
Additionally, remove limit normals, as the CPU code does not use them
either, and would also cause different shading issues when limit surface
is used.
Fixes T95242: shade smooth artifacts with edge crease and limit surface
Fixes T94919: subdivision, different shading between CPU and GPU
The custom data code checks for `LayerTypeInfo.defaultname` before
adding a second layer with a certain type. This was missed in
e7912dfa19. In practice, this default name
is not actually used.
Added call to ensure that the USD plugins are registered
when opening a USD cache archive. This is to avoid USD
load errors due to missing USD file format plugins when
opening blender files that contain USD transform cache
constraints and mesh sequence cache modifilers.
Fixes T94396
This operation can only be applied on one ID at a time, so only apply it
to the active Outliner item, and not all the selected ones.
Also renamed `Make Library Override` menu entry to `Make Library Override
Single` to emphasis this is not the 'default expected' option for the
user.
This affects essentially the Outliner 'create hierarchy' tool currenlty.
Previously code did not handle properly hierarchy root in case overrides
where created from a non-root ID (e.g. an object inside of a linked
collection), and in case additional partial overrides were added to an
existing partially overrided hierarchy.
Also did some renaming on the go to avoid using 'reference' in override
context for anything else but the reference linked IDs.
Trust user count to actually delete or not the dragged ID when current
dragging is cancelled, since it may be already used by others.
NOTE: This is more a band-aid fix than anything else, cancelling drag
has a lot of other issues here (like never deleting any indirectly
linked/appended data, etc.). It needs a proper rethink in general.
To keep consistency with the new contract option, the dilate now expand the shape beyond the internal closed area.
Note: This was committed only in master (3.2) by error.
This is requested by artist for some animation styles where is necessary to fill the area, but create a gap between fill and stroke.
Also some code cleanup and fix a bug in dilate for top area.
Reviewed By: pepeland, mendio
Differential Revision: https://developer.blender.org/D14082
Note: This was committed only in master (3.2) by error.
Using flags makes checking multiple modifiers at once more convenient
and avoids macros/functions such as IS_EVENT_MOD & WM_event_modifier_flag
which have been removed. It also simplifies checking if modifier keys
have changed.
This means textures need to have the number of mipmap levels specified
upfront. It does not mean the data is immutable.
There is fallback code for OpenGL < 4.2.
Immutable storage will enables texture views in the future.
Without ray offsets intersections at neigbhoring triangles are found, as
the ray start is exactly at the vertex. There was a small offset towards
the center of the triangle, but not enough.
Now this offset computation is moved into Cycles and modified for better
results. It's still not perfect though like any offset approach, especially
with long thin triangles.
Additionaly, this uses the shadow terminate offset for AO rays now, which
helps remove some pre-existing artifacts.
This is similar to f8fe0e831e, which made the change to the
handle position attributes. This commit removes the way that setting the
`position` attribute also changes the handle position attributes. Now,
the "Set Position" node still has this behavior, but changing the
attribute directly (with the modifier's output attributes) does not.
The previous behavior was a relic of the geometry nodes design
from before fields and the set position node existed.
This makes the transition to the new curves data structure simpler.
There is more room for optimizing the Bezier case of the set position
node in the future.
Also fix a couple other places where normals layers weren't properly
tagged dirty or reallocated when the mesh changes.
Caused by cfa53e0fbe. When the size of a mesh changes,
the normal layers need to be reallocated. There were a couple of places
that cleared other runtime data with `BKE_mesh_runtime_clear_geometry`
but didn't deal with normals properly. Clearing the runtime "geometry"
is different from clearing the normals, because sometimes the size of
the normal layers doesn't have to change, in which case simply tagging
them dirty is fine.
Reverts 6d97fdc37e. A function like this should not return a different
tree-display object than of the requested type. This may hide errors,
and leaves the Outliner in an undefined state (where the stored display
mode doesn't match the tree-display object). I rather don't hide the
fact that all display-modes should be handled here, and emit a clear
error if one isn't.
When X-ray mode is active the selection is done using the mesh data to
select what is closest to the cursor. When GPU subdivision is active with
the "show on cage" modifier option, this fails as the mesh used for selection
is the unsubdivided one.
This creates a subdivision wrapper before running the selection routines to
ensure that subdivision is available on the CPU side as well.
Differential Revision: https://developer.blender.org/D14188
This was a double free error which happened because `BM_mesh_bm_from_me`
was taking ownership of arrays that were still owned by the Mesh. Note that
this only happens when the mesh is empty but some custom data layers still
have a non-null data pointer. While usually the data pointer should be null in
this case for performance reasons, other functions should still be able to
handle this situation.
Differential Revision: https://developer.blender.org/D14181
When exporting generated coordinates, the subdivision export code was
using the schema for the non-subdivision case, which is invalid as
non-initialized. This typo existed since the initial commit for the
feature (rBf9567f6c63e75feaf701fa7b78669b9a436f13dd).
The scale-to-fit option did nothing for single words when
the text box had a height. This happened because it was expected that
text would be wrapped however single words never wrap.
Now the same behavior for zero-height text boxes is used when text
can't be wrapped onto multiple lines.
The handle position attributes `handle_left` and `handle_right` had
rather complex behavior to get expected behavior when aligned or auto/
vector handles were used. In order to simplify the attribtue API and
make the transition to the new curves data structure simpler, this
commit moves that behavior from the attribute to the "Set Handle
Positions" node. When that node is used, the behavior should be the
same as before. However, if the modifier's output attributes were used
to set handle positions, the behavior may be different. That situation
is expected to be very rare though.
This adds a node with a boolean field output which returns true if all of the
points of the evaluated face are on the same plane. A float field input allows
for the threshold of the face/point comparison to be adjusted on a per face basis.
One clear use case is to only triangulate faces that are not planar.
Differential Revision: https://developer.blender.org/D13906
Recently we changed the build pipeline to always create a version
number in the url and point 'dev' to the latest version rather than creating the version number url once we release.
This makes the check to `bpy.app.version_cycle` unnecessary.
tbb/enumerable_thread_specific.h drags in windows.h
which will define min/max macro's unless you politely
ask it not to.
it's bit of an eyesore, but it is what it is
0fd72a98ac called functions to set bezier handle positions
that used uninitialized memory. The fix is to define the handle positions
explicitly, like before.
The main goal here is to add the boilerplate code to make it possible
to add the actual sculpt tools more easily. Both brush implementations
added by this patch are meant to be prototypes which will be removed
or refined in the coming weeks.
Ref T95773.
Differential Revision: https://developer.blender.org/D14180
This adds a node which copies part of a geometry a dynamic number
of times.
Different parts of the geometry can be copied differing amounts
of times, controlled by the amount input field. Geometry can also
be ignored by use of the selection input.
The output geometry contains only the copies created by the node.
if the amount input is set to zero, the output geometry will be
empty. The duplicate index output is an integer index with the copy
number of each duplicate.
Differential Revision: https://developer.blender.org/D13701
Sometimes it is useful to get the index ranges that are in an index mask.
That is because some algorithms can process index ranges more efficiently
than generic index masks.
Extracting ranges from an index mask is relatively efficient, because it is
cheap to check if a span of indices contains a contiguous range.
Drag Action was constantly resetting itself to "move".
Solve this by storing the tool settings per tool and no longer clear
gizmo properties when activating a new tool.
- Reserve "test" for tests & testing frameworks.
- Add "check_mypy" to "make help" text.
- Output to the standard output instead of redirecting to log-files,
leave redirecting output log-files to the user running the command.
The build-bot directly referenced this file and doesn't
have publically available configuration.
Add an empty file until this can be removed by the build scripts.
This will make the transition to the new curves data structure
a bit simple, since the handle types can be copied directly between
the two. The change to CurveEval is simple because it is runtime-only.
Helps with building against different OpenXR SDK versions (i.e. for
downstream builds that require specific versions), as the extension was
only defined since OpenXR 1.0.22.
These were only set in two places. One was related to "tessellated loop
normal", and the other derived corner normals. The values were never
checked though, after 59343ee162. The handling of dirty face
corner normals is clearly problematic, but in the future it should be
handled like the normal layers on the other domains instead.
Ref D14154, T95839
Currently, when normals are calculated for a const mesh, a custom data
layer might be added if it doesn't already exist. Adding a custom data
layer to a mesh is not thread-safe, so this can be a problem in some
situations.
This commit moves derived mesh normals for polygons and
vertices out of `CustomData` to `Mesh_Runtime`. Most of the
hard work for this was already done by rBcfa53e0fbeed7178.
Some changes to logic elsewhere are necessary/helpful:
- No need to call both `BKE_mesh_runtime_clear_cache` and
`BKE_mesh_normals_tag_dirty`, since the former also does the latter.
- Cleanup/simplify mesh conversion and copying since normals are
handled with other runtime data.
Storing these normals like other runtime data clarifies their status
as derived data, meaning custom data moves more towards storing
original/editable data. This means normals won't automatically benefit
from the planned copy-on-write refactor (T95845), so it will have to be
added manually like for the other runtime data.
Differential Revision: https://developer.blender.org/D14154
Allow SCREEN_OT_area_swap to operate between different Blender
windows, and other minor feedback improvements.
See D14135 for more details and demonstrations.
Differential Revision: https://developer.blender.org/D14135
Reviewed by Campbell Barton
Currently the RNA functions to add mesh elements like vertices
don't clear the runtime cache of things like triangulation, BVH
trees, etc. This is important, since they might be accessed with
incorrect sizes. This is split from a fix for T95839.
Atomic operations performed by the C++ standard library might require
libatomic on platforms which do not have hardware support for those
operations.
This change makes it that such configurations are automatically detected
and -latomic is added when needed.
Differential Revision: https://developer.blender.org/D14106
NOTE: This function is currently unused. However, it does use a callback
defined by a few RNA properties through
`RNA_def_property_editable_array_func`, so don't think it should be
removed without further thinking.
This function had two main issues:
* It was doing bitwise AND on potentially three sources of property
flag, when actually used `RNA_property_editable` just use one source
ever.
* It was completely ignoring liboverride cases.
TODO: Deduplicate code between `RNA_property_editable`,
`RNA_property_editable_info` and `RNA_property_editable_index`.
There was accidentally some displacement related code running even when not
using displacement.
Differential Revision: https://developer.blender.org/D14169
Previously, objects and geometries were mapped between frames
using different hash tables in a way that is incompatible with
geometry instances. That is because the geometry mapping happened
without looking at the `persistent_id` of instances, which is not possible
anymore. Now, there is just one mapping that identifies the same
object at multiple points in time.
There are also two new caches for duplicated vbos and textures used for
motion blur. This data has to be duplicated, otherwise it would be freed
when another time step is evaluated. This caching existed before, but is
now a bit more explicit and works for geometry instances as well.
Differential Revision: https://developer.blender.org/D13497
For an upcoming prototype we would introduced a new eTexPaintMode
option. That would add more cases and if statements. This change migrate
the eTexPaintMode to 3 classes. AbstractPaintMode contains a shared interface.
ImagePaintMode for 2d painting and ProjectionPaintMode for 3d painting.
Reset Defaults left the undo stack in an invalid state,
with the active undo step left at the previous state then it should
have been.
Now the buttons own undo logic is used to perform undo pushes.
1. Now handles cyclic strokes correctly.
2. Added a sharp threshold value to allow preservation of sharp corners.
Reviewed By: Antonio Vazquez (antoniov), Aleš Jelovčan (frogstomp)
Ref D14044
1. Now will remove lines if both adjacent faces are back face.
2. Added a check to respect material back face culling setting.
3. Changed label in the modifier to "Force Backface Culling" (which reflect more accurately with what the checkbox does).
Reviewed By: Antonio Vazquez (antoniov), Aleš Jelovčan (frogstomp)
Ref D14041
- No need for `normal_tx` array if we normalize the planes in `plane_tx`.
- No need to calculate the distance squared to a plane (with `dist_signed_squared_to_plane_v3`) if the plane is normalized. `plane_point_side_v3` gets the real distance, accurately, efficiently and also signed.
So normalize the planes of the member `CameraViewFrameData::plane_tx`.
This is a regression partially introduced in rB0a6f428be7f0.
Bones being transformed into edit mode were snapping to themselves.
And the bones of the pose mode weren't even snapping.
(Curious that this was not reported).
Since Python 3.10 is now supported on all platform,
bump the minimum version to reduce the number of Python versions that
need to be supported simultaneously.
Reviewed By: LazyDodo, sybren, mont29, brecht
Ref D13943
This is an alternate fix for T35170 since it caused T44415.
Having the undo system manipulate the key-block coordinates is error
prone as (in the case of T44415) there are situations when it's
important to apply the difference with the original shape key.
This reverts dab0bd9de6, and instead
avoids the problem by not using the data in `Mesh.key` as a reference
for updating shape-keys when exiting edit-mode.
The assumption that the `Mesh.key` in edit-mode won't be modified
until leaving edit-mode isn't always true. Leading to synchronization
errors. (details noted in code-comments).
Resolve this by using shape-key data stored in the BMesh.
Resolving both T35170 & T44415.
Details:
- Remove use of the original vertices when exiting edit mode.
- Remove use of the original shape-key coordinates when exiting
edit-mode (except as a last resort).
- Move shape-key synchronization into a separate function:
`bm_to_mesh_key`.
- Split the synchronization loop into two branches,
depending on the existence of BMesh shape-key coordinates.
- Always write shape-key values back to the BMesh CD_SHAPEKEY layers.
This was only done in some cases but is now necessary for all
shape-keys as these are used to calculate offsets where the `Mesh.key`
was previously used.
- Report a warning when the shape-key layer isn't found as this uses an
imperfect method of restoring coordinates which should only be used as
a last resort.
Reviewed By: mont29
Ref D14127
The problem was when the Object Offset was enabled because the Constant Offset flag was not checked and the offset always was added to the transformation matrix.
Limit the min and max of the IDProperty for the node group input
from 0 to infinity, and the soft min and max between 0 and 1.
Thanks to @PratikPB2123 for investigation.
Instead of accessing the `CD_NORMAL` layer directly,
use the proper API for accessing mesh normals. Even if the
layer exists, the values might be incorrect due to a deformation.
Related to ef0e21f0ae, 969c4a45ce, and T95839.
The flags overlapped ever since normalize was added, so this
requires versioning to copy the flag value. This needs to be
done both in Blender 3.1 and 3.2.
Differential Revision: https://developer.blender.org/D14165
The flags overlapped ever since normalize was added, so this requires
versioning to copy the flag value.
Differential Revision: https://developer.blender.org/D14165
The code was using the same flag value for different modifiers,
resulting in matching the toggle to random overlapping flags.
Differential Revision: https://developer.blender.org/D14165
The constraints solver is now able to handle more cases correctly.
Also the behavior of the boundary fixes is slightly changed if
the constraints thickness mode is used.
Differential Revision: https://developer.blender.org/D14143
The modifier supports arithmetic operations, like Add or Multiply,
but for some reason omits Minimum and Maximum. They are similarly
simple and useful math functions and should be supported.
Differential Revision: https://developer.blender.org/D14164
When RMB-select uses "Select Tweak" as a fallback tool,
ignore all bindings mapped to the Control key as these are
used for path selection.
This was fixed in 2a2d873124
however that caused shift-select to fail (T93100).
The node animation versioning code passes `nullptr` to the `oldName` and
`newName` parameters, but those weren't `NULL`-safe. I added an extra
check for this.
No functional changes, just a crash fix.
Previously, all operators using `PaintStroke` would have to store
the stroke in `op->customdata`. That made it impossible to store
other operator specific data in `op->customdata` that was unrelated
to the stroke.
This patch changes it so that the `PaintStroke` is passed to api
functions as a separate argument, which allows storing the stroke
as a subfield of some other struct in `op->customdata`.
Althought the float buffers are only used as cache, current code paths
don't look at the flags to identify which kind of image it is. Actual
fix would be to check flags, but that wouldn't be something to add one
week before release.
This commit fixes it by removing the buffers after use in the image
engine.
The previous behavior called RNA_enum_item_add a second time,
filled it's contents with invalid values then subtracted totitem,
this caused an unusual reallocation pattern where MEM_recallocN
would run in order to create the dummy item, then again when adding
another itme (reallocating an array of the same size).
Simply memset the array to 0xff instead.
Even though the size of the map was set back to DEFAULT_SIZE_EXP,
the underlying arrays were left unchained. In some cases this caused
further expansions to result in an unusual reallocation pattern
where MEM_reallocN would run expand the entries into an array
that was in fact the same size.
Bug was introduced in D12167.
Reading input size from an input socket is not possible in tiled compositor before execution is initialized. A similar change was done for the base class, see BlurBaseOperation::init_data().
Reviewed by: Jeroen Bakker
Differential Revision: https://developer.blender.org/D14067
This adds maintence overhead and it is not that useful when we have reset to default.
If this is something that we want it should be added dynamically.
Reviewed By: HooglyBoogly, Severin, #user_interface
Differential Revision: https://developer.blender.org/D14151
After using MEM_dupallocN() on the original item/binding, the
user/component path ListBase for the new item/binding needs to be
cleared and each path copied separately.
This commit should suffice to make the shader API agnostic now (given that
all users of it use the GPU API).
This makes the shaders not trigger a false positive error anymore since
the binding slots are now garanteed by the backend and not changed at
after compilation.
This also bundles all uniforms into UBOs. Making them extendable without
limitations of push constants. The generated uniforms from OCIO are not
densely packed in the UBO to avoid complexity. Another approach would be to
use GPU_uniformbuf_create_from_list but this requires converting uniforms
to GPUInputs which is too complex for what it is.
Reviewed by: brecht, jbakker
Differential Revision: https://developer.blender.org/D14123
This commit should suffice to make the shader API agnostic now (given that
all users of it use the GPU API).
This makes the shaders not trigger a false positive error anymore since
the binding slots are now garanteed by the backend and not changed at
after compilation.
This also bundles all uniforms into UBOs. Making them extendable without
limitations of push constants. The generated uniforms from OCIO are not
densely packed in the UBO to avoid complexity. Another approach would be to
use GPU_uniformbuf_create_from_list but this requires converting uniforms
to GPUInputs which is too complex for what it is.
Reviewed by: brecht, jbakker
Differential Revision: https://developer.blender.org/D14123
This removes manual handling of normals that was hard-coded
to false in the one place the function was called. This change
will help to make a fix to T95839 simpler.
It's better not to expose the details of where the dirty flags are
stored to every place that wants to know if the normals are dirty.
Some of these places are relics from before vertex normals were
computed lazily anyway, so this is more of an incrememtal cleanup.
This will make part of the fix for T95839 simpler.
Make relation match material and world nodes. Does not address the reported
issue regarding muted nodes, but another missing update found investigating.
This was an old issue, but recent image partial update changes made this more
likely to happen in some cases. Now ensure that whenever the rendered scene
switches the image is updated.
This patch aims to fix the issues presented in T87829 and T95331,
namely precision issues while connecting two nodes when being too
close together in the node editor editors, in a few cases even
resulting in the complete inability to connect nodes.
Sockets are found by intersecting a padded rect around the cursor
with the nodes' sockets' location. That creates ambiguities, as it's
possible for the padded rect to intersect with the wrong node,
as the distance between two nodes is smaller than the rect is padded.
The fix in this patch is checking against an unpadded rectangle in
visible_node().
Differential Revision: https://developer.blender.org/D14122
The problem was that the code for sorting polygons around a vertex
assumed that it was a manifold or boundary vertex. However in some cases
the vertex could still be nonmanifold causing the crash. The cases where
the sorting fails are now detected and these vertices are then marked as
nonmanifold.
Differential Revision: https://developer.blender.org/D14065
The "Fill Caps" option on the Curve to Mesh node introduced in
rBbc2f4dd8b408ee makes it possible to fill the open ends of the sweep
to create a manifold mesh.
This patch fixes an edge case, where caps were created even when the
rail curve (the curve used in the "Curve" input socket) was cyclic
making the resulting mesh non-manifold.
Differential Revision: https://developer.blender.org/D14124
In ffmpeg 5.0, several variables were made const to try to prevent bad API usage.
Removed some dead code that wasn't used anymore as well.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D14063
Significantly improves loading speed of preview images from disk, e.g. custom
previews loaded using `bpy.utils.previews.ImagePreviewCollection.load()`.
See D14144 for details & comparison videos.
Differential Revision: https://developer.blender.org/D14144
Reviewed by: Bastien Montagne
Currently, whenever any BMesh is converted to a Mesh (except for edit
mode switching), original index (`CD_ORIGINDEX`) layers are added.
This is incorrect, because many operations just convert some Mesh into
a BMesh and then back, but they shouldn't make any assumption about
where their input mesh came from. It might even come from a primitive
in geometry nodes, where there are no original indices at all.
Conceptually, mesh original indices should be filled by the modifier
stack when first creating the evaluated mesh. So that's where they're
moved in this patch. A separate function now fills the indices with their
default (0,1,2,3...) values. The way the mesh wrapper system defers
the BMesh to Mesh conversion makes this a bit less obvious though.
The old behavior is incorrect, but it's also slower, because three
arrays the size of the mesh's vertices, edges, and faces had to be
allocated and filled during the BMesh to Mesh conversion, which just
ends up putting more pressure on the cache. In the many cases where
original indices aren't used, I measured an **8% speedup** for the
conversion (from 76.5ms to 70.7ms).
Generally there is an assumption that BMesh is "original" and Mesh is
"evaluated". After this patch, that assumption isn't quite as strong,
but it still exists for two reasons. First, original indices are added
whenever converting a BMesh "wrapper" to a Mesh. Second, original
indices are not added to the BMesh at the beginning of evaluation,
which assumes that every BMesh in the viewport is original and doesn't
need the mapping.
Differential Revision: https://developer.blender.org/D14018
This commit renames enums related the "Curve" object type and ID type
to add `_LEGACY` to the end. The idea is to make our aspirations clearer
in the code and to avoid ambiguities between `CURVE` and `CURVES`.
Ref T95355
To summarize for the record, the plans are:
- In the short/medium term, replace the `Curve` object data type with
`Curves`
- In the longer term (no immediate plans), use a proper data block for
3D text and surfaces.
Differential Revision: https://developer.blender.org/D14114
Fix boundary error in `BLI_str_unescape_ex`. The `dst_maxncpy` parameter
indicates the maximum buffer size, not the maximum number of characters.
As these are strings, the loop has to stop one byte early to allow space
for the trailing zero byte.
Thanks @mano-wii for the patch!
When removing a node that has a dependence on an ID, like the object
info node, the dependency graph relations weren't updated. This can
cause unexpected performance issues if a complex node tree continues
to depend on an ID that it doesn't actually use anymore. To fix this case,
tag relations for an update if the node has a data-block socket.
Fixes part of T88332
Differential Revision: https://developer.blender.org/D14121
If there is no animation at all, or it's all hidden, the Euler Filter
operators poll now fails with a message that explains this a bit more,
instead of just the generic "context is wrong" error.
Reviewed By: sybren
Maniphest Tasks: T95135
Differential Revision: https://developer.blender.org/D13967
While this should not happen in theory, very bad/broken/dirty files can
lead to such situations.
So we need to re-ensure valid root IDs after resync (for now, done after
each 'library indirect level' pass of resync, this may not be 100%
bulletproof though, time will say).
Found while investigating Blender studio issues in Snow parkour short.
In some cases broken files could lead to selecting a shapekey as
hierarchy root ID, which is not allowed.
Found while investigating Blender studio issues in Snow parkour short.
When new display driver is given to the PathTrace ensure that there are
no GPU resources used from it by the work. This solves graphics interop
descriptors leak.
This aqlso fixes Invalid graphics context in cuGraphicsUnregisterResource
error when doing final render on the display GPU.
Fixes T95837: Regression: GPU memory accumulation in Cycles render
Fixes T95733: Cycles Cuda/Optix error message with multi GPU devices. (Invalid graphics context in cuGraphicsUnregisterResource)
Fixes T95651: GPU error (Invalid graphics context in cuGraphicsUnregisterResource)
Fixes T95631: VRAM is not being freed when rendering (Invalid graphics context in cuGraphicsUnregisterResource)
Fixes T89747: Cycles Render - Textures Disappear then Crashes the Render
Maniphest Tasks: T95837, T95733, T95651, T95631, T89747
Differential Revision: https://developer.blender.org/D14146
Add check for `NULL` `from` pointer to `BLO_main_validate_shapekeys`,
and delete these shapekeys, as they are fully invalid and impossible to
recover.
Found in a studio production file (`animation
test/snow_parkour/shots/0040/0040.lighting.blend`, svn rev `1111`).
Would be nice to know how this was generated too...
This adds initial support for edit mode for the experimental new curves
object. For now we can only toggle in and out of the mode, no real
interraction is possible.
This patch also adds empty menus in edit mode. Those were added mainly
to quiet warnings as the menus are programmatically added to the edit
mode based on the object type and context.
Ref T95769
Reviewed By: JacquesLucke, HooglyBoogly
Maniphest Tasks: T95769
Differential Revision: https://developer.blender.org/D14136
This adds the boilerplate code that is necessary to use the tool/brush/paint
systems in the new sculpt curves mode.
Two temporary dummy tools are part of this patch. They do nothing and
only serve to test the boilerplate. When the first actual tool is added,
those dummy tools will be removed.
Differential Revision: https://developer.blender.org/D14117
Previous implementation had a copy of the image user, which doesn't
contain all the data to identify changes. This patch introduces a new
struct to store the data and can be extended with other data as well
(color spaces, alpha settings).
Check for a camera-view before checking if the view is locked
to the cursor/object since the camera-view takes priority,
it reads better to check that first.
Also reuse the event offset variable.
NDOF navigation in a camera view now behaves like orthographic pan/zoom.
Note that NDOF orbiting out of the camera view has been disabled,
see code comment for details.
Resolves T93666.
For the attribute search button, the tooltip was missing
if the input socket type has attribute toggle activated.
Differential Revision: https://developer.blender.org/D14142
This affected loading of EXR files with set to Linear ACES colorspace, as
well as the sky texture for in some custom OpenColorIO configurations.
Use the builtin OpenColorIO transform from ACES AP0 to XYZ D65 to fix this.
The idea is to keep `is_any_zero` in the `blender::math` namespace,
so instead of trying to be clever, just move it there and expand the
function where it was used in the class.
I noticed that there were a few variables that should not be visible per default.
It seems to me to simply be an oversight, so I went ahead and cleaned them up.
Reviewed By: Sybren, Ray molenkamp
Differential Revision: http://developer.blender.org/D14132
This commit should suffice to make the shader API agnostic now (given that
all users of it use the GPU API).
This makes the shaders not trigger a false positive error anymore since
the binding slots are now garanteed by the backend and not changed at
after compilation.
This also bundles all uniforms into UBOs. Making them extendable without
limitations of push constants. The generated uniforms from OCIO are not
densely packed in the UBO to avoid complexity. Another approach would be to
use GPU_uniformbuf_create_from_list but this requires converting uniforms
to GPUInputs which is too complex for what it is.
Reviewed by: brecht, jbakker
Differential Revision: https://developer.blender.org/D14123
This is a bug on the Blender side, where the depsgraph does not have proper
relations for text object duplis and fails to include the required materials
in the dependency graph. But at least Cycles should not crash.
- No need for `normal_tx` array if we normalize the planes in `plane_tx`.
- No need to calculate the distance squared to a plane (with `dist_signed_squared_to_plane_v3`) if the plane is normalized. `plane_point_side_v3` gets the real distance, accurately, efficiently and also signed.
So normalize the planes of the member `CameraViewFrameData::plane_tx`.
FindOpenImageIO was updated to link to separate OpenImageIO_Util for new
versions, where it is required. For older versions, we can not link to it
because there will be duplicated symbols.
Ref D14128
FindOpenEXR was updated to find new lib names and separate Imath. It's all
added to the list of OpenEXR include dirs and libs.
This keeps it compatible with both version 2 and 3 for now, and doesn't
require changes outside the find module.
Ref D14128
Coarse meshes with high polycount would show as corrupted when GPU
subdivision is used with AMD cards This was caused by the OpenSubdiv
library not taking `GL_MAX_COMPUTE_WORK_GROUP_COUNT` into account when
dispatching computes. AMD drivers tend to set the limit lower than
NVidia ones (2^16 for the former, and 2^32 for the latter, at least
on my machine).
This moves the `GLComputeEvaluator` from the OpenSubdiv library into
`intern/opensubdiv` and modifies it to compute a dispatch size in a
similar way as for the draw code: we split the dispatch size into a 2
dimensional value based on `GL_MAX_COMPUTE_WORK_GROUP_COUNT` and
manually compute an index in the shader.
We could have patched the OpenSubdiv library and sent the fix upstream
(which can still be done), however, moving it to our side allows us to
better control the `GLComputeEvaluator` and in the future remove some
redundant work that it does compared to Blender (see T94644) and
probably prepare the ground for Vulkan support. As a matter of fact,
this patch also removes the OpenGL initialization that OpenSubdiv would
do here. This removal is not related to the bug fix, but necessary to not
have to copy more files/code over.
Differential Revision: https://developer.blender.org/D14131
Previously, the number of action map subactions was limited to two per
action (identified by user_path0, user_path1), however for devices with
more than two user paths (e.g. Vive Tracker) it will be useful to
support a variable amount instead.
For example, a single pose action could then be used to query the
positions of all connected trackers, with each tracker having its own
subaction tracking space.
NOTE: This introduces breaking changes for the XR Python API as follows:
- XrActionMapItem: The new `user_paths` collection property
replaces the `user_path0`/`user_path1` properties.
- XrActionMapBinding: The new `component_paths` collection property
replaces the `component_path0`/`component_path1` properties.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D13949
This fixes VR pink screen issues when using the DirectX backend, caused
by `wglDXRegisterObjectNV()` failing to register the shared
OpenGL-DirectX render buffer. The issue is mainly present on AMD
graphics, however, there have been reports on NVIDIA as well.
A limited workaround for the SteamVR runtime (AMD only) was provided
in rB82ab2c167844, however this patch provides a more complete solution
that should apply to all OpenXR runtimes. For example, with this patch,
the Windows Mixed Reality runtime that exclusively uses DirectX can now
be used with AMD graphics cards.
Implementation-wise, a `GL_TEXTURE_2D` render target is used as a
fallback for the shared OpenGL-DirectX resource in the case that
registering a render buffer (`GL_RENDERBUFFER`) fails. While using a
texture render target may be less optimal than a render buffer, it
enables proper display in VR using the OpenGL/DirectX interop (tested
on AMD Vega 64).
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D14100
After running the breakdown operator for the graph editor,
the factor property in the redo panel didn't reflect the value you chose
to mitigate that issue down the line there is a
new helper function to get the factor value, and
store it at the same time
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D14105
Ref: D14105
Brew's Python framework's site-packages is a symlink so the assumption
that Resources and site-packages would be in the same directory
doesn't hold. So install scripts etc relative to bpy.so. Part of D14111
StringGrid has been deprecated in openvdb 9.0.0 and will be removed soon
Reviewed By: Brecht
Differential Revision: http://developer.blender.org/D14133
The general idea here is to wrap the `CurvesGeometry` DNA struct
with a C++ class that can do most of the heavy lifting for the curve
geometry. Using a C++ class allows easier ways to group methods, easier
const correctness, and code that's more readable and faster to write.
This way, it works much more like a version of `CurveEval` that uses
more efficient attribute storage.
This commit adds the structure of some yet-to-be-implemented code,
the largest thing being mutexes and vectors meant to hold lazily
calculated evaluated positions, tangents, and normals. That part might
change slightly, but it's helpful to be able to see the direction this
commit is aiming in. In particular, the inherently single-threaded
accumulated lengths and Bezier evaluated point offsets might be cached.
Ref T95355
Differential Revision: https://developer.blender.org/D14054
Finding the greatest and/or smallest element in an array is a common
need. This commit refactors the point cloud bounds code added in
6d7dbdbb44 to a more general header in blenlib.
This will allow reusing the algorithm for curves without duplicating it.
Differential Revision: https://developer.blender.org/D14053
This is meant to complement the `blender::math` functions recently
added by D13791. It's sometimes desired to template an operation to work
on vector types, but also basic types like `float` and `int`. This patch
adds that ability with a new `BLI_math_base.hh` header.
The existing vector math header is changed to use the `vec_base` type
more explicitly, to allow the compiler's generic function overload resolution
to determine which implementation of each math function to use.
This is a relatively large change, but it also makes the file significantly
easier to understand by reducing the use of macros.
Differential Revision: https://developer.blender.org/D14113
Fix possible overflow of Modifier UUID
The code prior this change was re-generating modifier's session UUID
prior to copying this id from the source. This approach has a higher
risk of modifiers session UUID to overflow and start colliding with
existing modifiers.
This change makes it so that modifier copy does not re-generated the
session UUID unless it is needed.
Differential Revision: https://developer.blender.org/D14125
GLUT does not support offscreen contexts, which is required for the new
display driver. So we use SDL instead. Note that this requires using a
system SDL package, the Blender precompiled SDL does not include the video
subsystem.
There is currently no text display support, instead info is printed to
the terminal. This would require adding an embedded font and GLSL shaders,
or using GUI library.
Another improvement to be made is supporting OpenColorIO display transforms,
right now we assume Rec.709 scene linear and display.
All OpenGL, GLEW and SDL code was move out of core cycles and into
app/opengl. This serves as a template for apps that want to integrate
Cycles interactive rendering, with a simple OpenGLDisplayDriver example.
In general this would be adapted to the graphics API and color management
used by the app.
Ref T91846
Due to recent changes there have been reports of incorrect loading of
GPU textures. This fix reverts a part of {D13238} that might be the
source of the issue.
This does not happen with **any** image, but with images that have ID
properties.
ID properties are used to store view projection matrices (e.g. for
reprojection with `Image from View` or `Quick Edit` -- these are the
ones we are interested in), but of course they can be used for anything
else, too. The images in the file from the report have ID properties from
an Addon for example.
So the crash can reliably be reproduced with **any** image doing the
following:
```
bpy.data.images['myImage']['myIDprop'] = "foo"
```
This would lead code in `texture_paint_camera_project_exec` to think the
needed `view_data` is on the image (but in reality it was just some
other IDprop).
Solution is simple: just check `view_data` is really valid after getting
it from the IDprops.
Maniphest Tasks: T95787
Differential Revision: https://developer.blender.org/D14116
Having this setting stored in the image space caused low level selection
logic to have to pass around the image space (which could be NULL
in some cases). Use the tool-settings instead since there doesn't seem
to be much/any advantage in having this setting per-space.
Although rB56407432a6a did fix missing subdivision in some cases, in
other cases it did not return the mesh wrapper (like when using
autosmooth, which requires a copy of the mesh), so the non-subdivided
mesh was still returned.
Not all coarse vertices were used to compute the center value (off by
one), and the interpolation for the current would always start at the
base corner for the base face instead of the base corner for the current
patch.
This patch reverses the dependency between `BLI_math_vec_types.hh` and
`BLI_math_vector.hh`. Now the higher level `blender::math` functions
depend on the header that defines the types they work with, rather than
the other way around.
The initial goal was to allow defining an `enable_if` in the types header
and using it in the math header. But I also think this operations to types
dependency is more natural anyway.
This required changing the includes some files used from the type
header to the math implementation header. I took that change a bit
further removing the C vector math header from the C++ header;
I think that helps to make the transition between the two systems
clearer.
Differential Revision: https://developer.blender.org/D14112
This commit renames `mesh_validate.cc` to `mesh_calc_edges.cc`.
I would like to move `mesh_validate.c` to C++, but it makes sense to
keep this specific algorithm in a smaller file.
When running `./blender/build_files/build_environment/install_deps.sh` on Ubuntu 20.04.3 LTS the following error can be seen:
```
./blender/build_files/build_environment/install_deps.sh: line 1266: [: too many arguments
```
This error results from the call:
```
check_package_version_ge_DEB $CLANG_FORMAT $CLANG_FORMAT_VERSION
```
with `CLANG_FORMAT_VERSION` being undefined.
Also as `clang-format` 13 is already released and hopefully didn't break anything `CLANG_FORMAT_VERSION_MEX` could use version bump.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D13924
This adds a new sculpt mode to the experimental new curves object.
Currently, this mode can only be entered and exited, nothing else.
The main initial purpose of this node will be to use it for hair grooming.
The patch also adds the `editors/curves/` directory for the new curves
object, which will be necessary for many other things as well.
I added a completely new mode (`OB_MODE_SCULPT_CURVES`), because
`OB_MODE_SCULPT` seems to be rather specific to meshes, and reusing
it doesn't seem worth the trouble. The tools/brushes used in mesh vs.
curves sculpt mode are quite distinct as well.
I had to add DNA_userdef_enums.h to make the patch compile with C++
(forward declaration of enums isn't allowed). This follows the same
pattern that we use for other enums in dna.
Differential Revision: https://developer.blender.org/D14107
The path calculation method for animation players: frame-cycler, rv &
mplayer would fail when the number of digits exceeded the range of a
32bit int causing RenderData.frame_path() to raise a ValueError.
Use a simpler method of extracting the range that uses the sign to
detect the beginning of the number.
Since the output file stays unmodified for most developer builds,
install step installed it redundantly.
Create readme.html using `configure_file`:
- Now it's modified only if final output changes (handled by CMake).
- If input file (from git) or blender version changes,
it //will// be modified.
Also don't re-implement what CMake can do.
Reviewed By: campbellbarton, LazyDodo
Differential Revision: https://developer.blender.org/D13863
- Increment the argument index at the end of the loop.
Otherwise using the index after incrementing required subtracting 1.
- Move error prefix creation into a function: `pyrna_func_error_prefix`
so it's possible to create an error prefix without duplicate code.
This simplifies further changes for argument parsing from D14047.
Set "view2d_edge_pan" to true for the NODE_OT_translate_attach operator,
which is used by the duplication operator. This is done in the keymap so
that it's not hard-coded.
Differential Revision: https://developer.blender.org/D13934
The root issue was caused by a mistake in modifier copy data which was
wrongly re-generating source modifier data identifier.
The c8cca88851 simply exposed a bug in code which always was there
since the modifiers session UUID was introduced.
Shows an importance of const qualifier :)
Since now we delegate the evaluation of the last subsurf modifier in the stack
to the draw code, Cycles does not get a subdivided mesh anymore. This is because
the subdivision wrapper for generating a CPU side subdivision is never created
as it is only ever created via `BKE_object_get_evaluated_mesh` which Cycles does
not call (rather, it accesses the Mesh either via `object.data()`, or via
`object.to_mesh()`).
This ensures that a subdivision wrapper is created when accessing the object data
or converting an Object to a Mesh via the RNA/Python API.
Reviewed by: brecht
Differential Revision: https://developer.blender.org/D14048
This is requested by artist for some animation styles where is necessary to fill the area, but create a gap between fill and stroke.
Also some code cleanup and fix a bug in dilate for top area.
Reviewed By: pepeland, mendio
Differential Revision: https://developer.blender.org/D14082
The crash is caused as we did not check that the RNA pointer is null
before trying to use it. This moves the existing checks from the
modifier panels into the template functions so the logic is a bit
centralized.
The issue has two causes: on one hand origin indices were not handled
properly, on the other hand the extraction type (Mesh, BMesh, or mapped)
was not detected correctly.
For the second case reuse the MeshRenderData creation from the coarse
code path so that we make the same decisions. Loose geometry extraction
had to be updated to properly handle the BMesh cases.
For the origin indices, in some cases (for edges and faces), the arrays
used by the subdivision code already have the origin indices baked into
them, so mapping them a second time through the origin index layer is
wrong, and could cause out of bounds accesses.
For vertices especially, we would use two arrays: one for mapping
subdivision vertices to coarse vertices, and another one to map coarse
vertices to subdivision loops used for the selection index buffer. The
second one is now removed (which saves a bit of memory) as it is did not
have the proper data setup for use with the origin indices and we can
easily compute it using the first array anyway.
Fix segfault when calling `some_id.id_properties_ui("propname").update()`,
i.e. call the `update()` function without any keyword arguments. In such
a case, Python passes `kwargs = NULL`, but `PyDict_Contains()` is not
`NULL`-safe.
The Viewer marked the gpu texture to be out of date. But it should have used
the mark_full_update as the gpu textures
are only used by the render/draw engines.
The image/node editor uses the image engine that have its own GPU textures.
Currently one a single texture slot is used to update the screen.
Current design is implemented to use multiple textures.
for now limit the number of texture slots to 1.
This node is a bit of a weird case, because it uses the value stored in an
output socket as an input. So when we want to determine if the Dot
changed, we also have to check if the Normal output changed.
A cleaner solution would be to refactor this by either storing the normal
on the node directly (instead of in an output socket), or by exposing it
by a separate input. This refactor should be done separately though.
Currently whenever gl queries are performed for the viewport, a large
1024 byte array is allocated to store the query results (256 of them).
Unfortunately, if any gizmo using a `draw_select` callback is active
(e.g. the transform gizmos), these queries (and allocations) will occur
during every mouse move event.
Change the vector to allow for up to 16 query results before making an
allocation. This provides enough space for every built-in gizmo except
Scale Cage (which needs 27 queries). It also removes unnecessary
allocations from two other related vectors used during query processing.
Differential Revision: https://developer.blender.org/D13784
This is a regression partially introduced in rB0a6f428be7f0.
Bones being transformed into edit mode were snapping to themselves.
And the bones of the pose mode weren't even snapping.
(Curious that this was not reported).
This fix avoid the drif checking if the previous position is equals to new one, in this case, the pen has not moved and can be canceled.
Differential Revision: https://developer.blender.org/D13870
The animation playback did not take into account individual stereoscopic views.
This patch fixes this by playing back the active view render.
Reviewed By: campbellbarton
Maniphest Tasks: T91423
Differential Revision: https://developer.blender.org/D14070
Workaround for a compilation issue preventing kernels compiling for AMD GPUs: Avoid problematic use of templates on Metal by making `gpu_parallel_active_index_array` a wrapper macro, and moving `blocksize` to be a macro parameter.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D14081
A zero length vector was normalized and the resulting NaN used in further calculations.
This caused trouble on some compilers when using fast math.
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D14058
* Apple Silicon support enabled on macOS 12.2+
* AMD support enabled on macOS 12.3+
This patch also fixes a device enumeration crash on certain AMD configs which
was caused by over-release of MTLDevice objects.
Differential Revision: https://developer.blender.org/D14090
Improve the nodes' drop shadow by making it scale with the view
and replace the loop for the alpha calculation with something more
explicit.
The amount of drop shadow softness was scaled with the zoom level
and therefore had a fixed screen space size. DPI and UI scale
weren't taken into account either. This patch fixes both issues by
basing the shadow softness on the `widget_unit` that scales correctly
in zoomable views and takes UI scale etc. into account.
Differential Revision: https://developer.blender.org/D13356
* Replace license text in headers with SPDX identifiers.
* Remove specific license info from outdated readme.txt, instead leave details
to the source files.
* Add list of SPDX license identifiers used, and corresponding license texts.
* Update copyright dates while we're at it.
Ref D14069, T95597
Drivers make it way too easy to create dependenciy loops between IDs, so
need to use the same trick as in other dependency-following code in this
file to prevent those infinite loops.
hard to predict for sure how bad of a hierarchy root this can end up
producing, but in general cases think this should be OK.
The rbit instruction is only available starting with ARMv6T2 and
the register prefix is different from what AARCH64 uses.
Separate the 32 and 64 bit ARM branches, add missing ISA checks.
Made sure the code works as intended on macMini with Apple silicon,
and on Raspberry Pi 4 B running 32bit Raspbian OS.
Differential Revision: https://developer.blender.org/D14056
Reduce compute effort of liboverrides resync process by only re-syncing
the parts of the override hierarchy that actually need it.
The main change compared to existing code (which was systematically resyncing
a whole override hierarchy), is that resyncing now operates over several
sub-hierarchies at once, each defined by their own 'resync root' ID.
This ensures that we do not get several new overrides for the same data inside
of the same hierarchy.
Implements T95682.
Differential Revision: https://developer.blender.org/D14079
This patch increases the performance when remapping data.
{D13615} introduced a mechanism to remap multiple items in a single go.
This patch uses the same mechanism when remapping data inside ID datablocks.
Benchmark results when loading the village scene of sprite fright on AMD Ryzen 7 3800X 8-Core Processor
Before this patch 115 seconds
When patch applied less than 43 seconds
There is still some room for improvement by porting relink code.
Reviewed By: mont29
Maniphest Tasks: T95279
Differential Revision: https://developer.blender.org/D14043
Adds helper functions to debug IDRemapper data structure.
`BKE_id_remapper_result_string` converst a given IDRemapperApplyResult
to a readable form for logging purposes.
`BKE_id_remapper_print` prints out the rules inside a IDRemapper struct.
Instead of creating and destroying threads when starting and stopping renders,
keep a single thread alive for the duration of the session. This makes it so all
display driver OpenGL resource allocation and destruction can happen in the same
thread.
This was implemented as part of trying to solve another bug, but it did not
help. Still I prefer this behavior, to eliminate potential future issues wit
graphics drivers or with future Cycles display driver implementations.
Differential Revision: https://developer.blender.org/D14086
For reasons unclear, destroying and then recreating a vertex buffer in the
render OpenGL context is affecting the immediate mode vertex buffer in the
draw manager OpenGL context.
Instead just create a single vertex buffer and use it for the lifetime of
the render OpenGL context. There's not really any need to have a separate
one per tile as far as I can tell.
Differential Revision: https://developer.blender.org/D14084
This adds support for exporting attributes from a Blender Curves object to Cycles.
The implementation follows that of the Mesh object. This also creates motion blur
data if the "velocity" attribute is present on the Curves.
Ref T94193
Reviewed By: brecht
Maniphest Tasks: T94193
Differential Revision: https://developer.blender.org/D14088
Due to the freeing and re-creation of textures performed when binding
offscreen viewports, VR viewport textures would be needlessly
re-created every drawing iteration, leading to a negative impact on VR
frame rate.
This was brought to light by 6738ecb64e, which introduced an
additional texture clear operation on initialization and was
prohibitively costly on some systems when performed every frame.
Now, the textures for VR viewports will not be always re-created
during offscreen binding, but only when necessary using a pre-drawing
step (`wm_xr_session_surface_offscreen_ensure()`).
Reviewed By: jbakker, fclem
Differential Revision: https://developer.blender.org/D14059
When using a RGBA16 (`GL_RGBA16`, `DXGI_FORMAT_R16G16B16A16_UNORM`)
swapchain format with Quest 2, no image is presented to the headset.
This can occur when using the SteamVR runtime with an AMD graphics card
(ex. T95374).
Workaround is to move this format after the Quest 2-compatible RGBA16F
formats in the candidates list so that the RGBA16F formats are chosen
instead.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D14024
Crash was caused since the function pointers
`s_xrGetOpenGLGraphicsRequirementsKHR_fn`/
`s_xrGetD3D11GraphicsRequirementsKHR_fn` were static and were not
updated with the correct proc address after being set the first time.
As stated in the OpenXR spec: "function pointers returned by
xrGetInstanceProcAddr using one XrInstance may not be valid when used
with objects related to a different XrInstance".
Although it would seem reasonable that the proc address would not
change if the instance was the same (hence the `static XrInstance s_instance;`),
in testing, repeated calls to `xrGetInstanceProcAddress()`
with the same instance still can result in changes (at least for the
SteamVR runtime) so the workaround is to simply set the function pointers
every time, essentially trivializing their `static` designations.
Reviewed By: Severin
Maniphest Tasks: T94268
Differential Revision: https://developer.blender.org/D14023
For the majority of node groups created in Blender 3.0 the behavior does not change.
So far we only found a single file where this setting has an effect.
Differential Revision: https://developer.blender.org/D14078
For an upcoming project we would want to match multiple id types in a
single go. To not replicate the implementation using other types we
introduce `BKE_library_id_can_use_filter_id` that returns all supported
types as a filter.
Not all ID types have a filter_id (ID_LI, ID_KE, ID_SCR) These
exceptions are not available in the filter_id function.
Reviewed By: mont29
Maniphest Tasks: T95279
Differential Revision: https://developer.blender.org/D14061
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
Complex Solidify creates edge bevel weights on the rim if the
according vertex has some vertex bevel weight. If there are no
edge bevel weights, they were left disabled even if vertex bevel
weights are used.
Some curve objects don't have an evaluated mesh at all, but line art
currently assumes that all curve objects have one before converting
it to a mesh internally. Fix this by checking if the curve object has an
evaluated mesh before skipping it.
The remaining problem is that evalauted from non-mesh objects or
evaluated curves from non-curve objects, etc. will be ignored if
"Allow Duplicates" is off. That's a different problem though.
Differential Revision: https://developer.blender.org/D14036
For curve-heavy scenes, memory consumption regressed when we switched from MetalRT to bvh2. Allow users to opt in to MetalRT to workaround this.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D14071
Disable binary archives on Apple Silicon (issue stems from instancing multiple PSOs from the same binary archive). Pipeline creation still filters through the OS shader cache, mitigating any impact on setup times after the initial render.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D14072
This is part of the project of converting `MVert` into `float3`.
(more details in T93602), The pbvh update flag is removed and
replaced with a bitmap stored in the PBVH structure. This
patch is similar to D13878. This is mainly setup for an eventual
performance improvement by removing the extra data from
mesh vertices, but if it's consistent with testing in the other patch
doing the same thing for another "temp tag", then it may actually
increase the speed of sculpt code slightly, since less memory needs
to be loaded when checking/changing the flags.
Differential Revision: https://developer.blender.org/D14000
The main issue is that the image and image user is not updated correctly
in `rna_ImageUser_update`. `BKE_image_user_frame_calc` does not set the
correct frame, because the image is null. Also `IMA_GPU_REFRESH` is not
set for the same reason.
When gpu materials are first created, it is expected that the frame is set
correctly, and the flag is set if necessary. Therefore, somewhere during
depsgraph evaluation, those have to be updated. The depsgraph node
to do the update existed already. Now there is a new relation so that it is
executed when the node tree changed, not only when the frame changed.
This is partially caused by a stupid mistake in cfa53e0fbe
where I missed initializing the `vert_normals` pointer in
`MResolvePixelData`. It's also caused by questionable assumptions
from DerivedMesh code that vertex normals would be valid.
The fix used here is to create a temporary mesh with the data necessary
to compute vertex normals, and ensure them here. This is used because
normal calculation is only implemented for `Mesh` and edit mesh, not
`DerivedMesh`. While this might not be great for performance, it's
potentially aligned with future refactoring of this code to remove
`DerivedMesh` completely. Since this is one of the last places the data
structure is used, that would be a great improvement.
Differential Revision: https://developer.blender.org/D13960
While applying liboverrides on linked data, RNA code (in
`rna_property_override_check_resync`) would detect a lot of false positive
regarding IDs needing resync, because the temporary ID used to apply
overrides was always local, breaking the libraries comparison check.
NOTE: that whole 'apply liboverrides' code could use some refreshment,
it did not change much from initila version several years ago, we now
have better tools and control over non-main data.
But for now the 'trick' in that commit should do the job, ultimately
those temps IDs should never be put in Main at all.
The crash was happening when the mesh had loose edges.
Loose edges are not part of OpenSubdiv topology and hence should not be
communicated to the refiner. Pass ta boolean flag indicating whether an
edge is loose or not in the mesh foreach routines, which seems to be
the easiest way.
Decouple the reference (linked) root ID and the hierarchy (override) root ID.
Previous code was assuming that the reference ID was always also tagged
for override creation, which is true in current master, but cannot be
assumed in general (and won't be true with partial resync anymore).
Also add asserts to validate conditions that the reference/hierarchy_root
variables must meet.
There are two things achieved by this change:
- No possible downcast of size_t to int when calculating motion steps.
- Disambiguate call to `min()` which was for some reason considered
ambiguous on 32bit platforms `min(int, unsigned int)`.
- Do the same for the `max()` call to keep them symmetrical.
On an implementation side the `min()` is defined for a fixed width
integer type to disambiguate uint from size_t on 32bit platforms,
and yet be able to use it for 32bit operands on 64bit platforms without
upcast.
This ended up in a bit bigger change as the conditional compile-in of
functions is easiest if the functions is templated. Making the functions
templated required to remove the other source of ambiguity which is
`algorithm.h` which was pulling min/max from std.
Now it is the `math.h` which is the source of truth for min/max.
It was only one place which was relying on `algorithm.h` for these
functions, hence the choice of `math.h` as the safest and least
intrusive.
Fixes 32bit platforms (such as i386) in Debian package build system.
Differential Revision: https://developer.blender.org/D14062
This implements the update cache described in T95401.
The cache is currently only used for drawing strokes and
sculpting (using the push brush).
**Note: Making use of the cache throughout grease pencil will
have to be done incrementally in other patches. **
The update cache stores what elements have changed in the
original data-block since the last time the eval object
was updated. Additionally, the update cache can store multiple
updates to the data and minimizes the number of elements
that need to be copied.
Elements can be tagged using `BKE_gpencil_tag_full_update` and
`BKE_gpencil_tag_light_update`. A full update means that the element
itself will be copied but also all of the content inside. E.g. when a
layer is tagged for a full update, the layer, all the frames inside the
layer and all the strokes inside the frames will be copied.
A light update means that only the properties of the element are copied
without any of the content. E.g. if a layer is tagged with a light
update, it will copy the layer name, opacity, transform, etc.
When the update cache is in use (e.g. elements have been tagged) then
the depsgraph will not trigger a copy-on-write, but an update-on-write.
This means that the update cache will be used to determine what elements
have changed and then only those elements will be copied over to the
eval object.
If the update cache is empty or the data block was tagged with a full
update, we always fall back to a copy-on-write.
Currently, the update cache is only used by the active depsgraph. This
is because we need to free the update cache after an update-on-write so
it's reset and we need to make sure it is not freed or read by other
depsgraphs.
Co-authored-by: @yann-lty
This patch was contributed by The SPA Studios.
Reviewed By: sergey, antoniov, #dependency_graph, pepeland, mendio
Maniphest Tasks: T95401
Differential Revision: https://developer.blender.org/D13984
Simple upgrade of OpenXR to 1.0.22, following the steps from
https://wiki.blender.org/wiki/Source/OpenXR_SDK_Dependency and
rBb69ab42982a1. No changes to Blender code were necessary, only a version
bump.
The primary motivation for this upgrade is to utilize the
`XR_HTCX_vive_tracker_interaction` extension introduced in ver. 1.0.20.
However, the latest release (1.0.22) also adds a number of potentially
useful extensions such as:
- `XR_FB_render_model`
- `XR_HTC_facial_expression`
- `XR_HTC_vive_focus3_controller_interaction`
Ref T95206
Reviewed By: LazyDodo, sybren, mont29
Maniphest Tasks: T95206
Differential Revision: https://developer.blender.org/D13950
Turn off "Sync Length" when splitting an NLA strip.
The NLA Strip-Action Clip has a setting called "Sync Length" that is on
by default and helps to update the length of the clip to the current
actions keyframes so the strip shows the entire actions stored
animation.
When you split one of these strip-action clips in the NLA to trim it
shorter or to move it somewhere else in the NLA tracks to blend or work
with, the "Sync Length" setting stays checked on. You can have many
strips in the NLA that all look to the same action, if you split one
strip , you now have two strips showing or linked to the same action.
To see or edit keyframes on a strip, you enter tweak mode. When you exit
tweak mode, if "Sync Length" is active on the strip-action clip
settings, the strip length is changed/reset to match the action keys.
When you have many clips, this causes all of them to evaluate and update
no matter where they are in the NLA. This destroys/undoes all the user
work to trim down and place the clips in the NLA.
**Description of the proposed solution:**
This patch/change would turn off, the "Sync Length" setting when the
split tool was used on a strip/action clip to help protect the users
choice to trim and keep the clip that length. It doesn't change the
ability to turn the setting back on or off, it just makes sure that the
user doesn't accidentally or unknowingly loose work.
The same process happens when an action is created that has a "manual
range" set that is different than the length of the actions start-end
keyframes. It makes sense to do the same thing for the split tool.
**Alternative solutions:**
While the user could know this and turn off this setting by hand, it is
easy to forget and or the user might think that it only happened to the
one clip they were editing and not realize it happened to all the
trimmed versions, changing the users choice without the user knowing it
happened.
**Limitations of the proposed solution:**
It only fixes the split tool, if another tool was created and some how
impacted the clip length we would need to have that tool also take the
sync length into account.
Reviewed By: sybren
Maniphest Tasks: T84486
Differential Revision: https://developer.blender.org/D10168
From a strict language point of view the code required a braces around
`trgba` initialization. But it is easier to rely on the fact that fields
which are not specified are zero-initialized.
Under some circumstances, simply adding a curve object and going
to edit mode would cause a crash. This is because the evaluated
`CurveEval` was accessed but also freed by the dependency graph.
The fix reverts the part of b76918717d that uses the
`CurveEval` for the curve object bounds. While this isn't ideal,
it was the previous behavior, and some unexpected behavior
with object bounds is much better than a crash. Plus, given the plans
of using the new "Curves" data-block for evaluated curves, this
situation will change relatively soon anyway.
Strip aligning wasn't done when length of 2 strip is equal, but since
these strips are aligned according to position in stream this can
produce offset.
There are two things achieved by this change:
- No possible downcast of size_t to int when calculating motion steps.
- Disambiguate call to min() which was for some reason considered
ambiguous on 32bit platforms `min(int, unsigned int)`.
On an implementation side the `min()` is defined for a fixed width
integer type to disambiguate uint from size_t on 32bit platforms,
and yet be able to use it for 32bit operands on 64bit platforms without
upcast.
Fixes 32bit platforms (such as i386) in Debian package build system.
Differential Revision: https://developer.blender.org/D13992
Added a new "Sharpen Less" kernel to the filter compositor node. The intent here is to provide a much less aggressive sharpening filter that can't simply be solved by toning down the factor on the existing sharpen filter.
The existing "Sharpen" filter uses a "box" kernel:
```
-1 -1 -1
-1 9 -1
-1 -1 -1
```
The new "Sharpen Less" filter uses a "diamond" kernel:
```
0 -1 0
-1 5 -1
0 -1 0
```
The difference between the two is clear to see in the following side-by-side:
{F12847431}
Below shows the difference between the filtering kernels as applied to a B&W render of Suzanne with the UV grid as a texture. The left side of the render using the existing "Sharpen" filter, and the right side showing the new "Sharpen Less" filter. Notice that the left side is more aggressive in accentuating localized contrasts across the image. This can lead to what appears to be aliasing or striations in the resulting image:
{F12847429}
https://developer.blender.org/T95275https://blender.community/c/rightclickselect/57Kq/?sorting=hot
{F12847428}
Reviewed By: #compositing, jbakker
Differential Revision: https://developer.blender.org/D14019
This is almost always meaningless as most code has changed
since the comment was added. Besides this, version control can be used
to check if/when a file was modified.
Some cases of this were kept when they contain details
about the original copyright holder.
Order copyright immediately after the license block,
this was done almost everywhere with a few exceptions.
Remove authors from a few files (we had already removed "Contributors"
section however with old patches being applied this gets added back in).
Also move descriptive text into the doxygen comment block under \file.
In some cases remove the text as it was accidentally copied.
GHOST_ISystem::toggleConsole had a somewhat misleading name
it could be fed 4 different values, so it was not as much a
toggle as a set console window state.
This change renames `toggleConsole` to a more appropriately
named `setConsoleWindowState` and replaces the integer it had
to an enum so it's easy to tell what is being asked of it at
the call site.
Reviewed By: LazyDodo
Differential Revision: https://developer.blender.org/D14020
Symmetrize Armature now also symmetrizes the transform of custom bone
shapes.
Adds a new property to `bpy.ops.armature.symmetrize`:
//Parameters//:
- **direction **(enum in ['NEGATIVE_X', 'POSITIVE_X'], (optional)) –
**Direction**, Which sides to copy from and to (when both are selected)
- **custom_shape **(enum in ['SYMMETRIZE_SAME', 'SYMMETRIZE_ALL',
'SYMMETRIZE_NONE'], (optional)) – **Custom Shapes**, Wether to
symmetrize non symmetric custom bone shapes, all custom shapes, or
none at all
//Rationale//:
Reviewed By: #animation_rigging, Mets, sybren
Maniphest Tasks: T91871
Differential Revision: https://developer.blender.org/D13416
Add files with extension ".woff" and ".woff2" to FILE_TYPE_FTFONT
file type. Allows selecting and using these types of font files.
See D13822 for more details.
Differential Revision: https://developer.blender.org/D13822
Reviewed by Campbell Barton
Avoid using the uint64_t as an intermediate cast since it complicates
behavior for signed types (which first need to be cast to an int64_t).
Assign both old_value_i & old_value_f from the original value to avoid
the need for different handling of signed/unsigned types.
Reviewed By: JacquesLucke
Ref D14039
A Bump node without a Height input is meaningless and does nothing.
As such, it is available as an old workaround that allows making Node
Group inputs that default to normal when not connected, by routing
via a no-op Bump node before doing math.
Cycles specifically recognizes this use case and either bypasses
the node, or converts it into a Geometry Normal node, but Eevee
was still evaluating it as usual. That incurred performance cost,
and also normalized the vector unlike Cycles.
This implements the same bypass logic for Eevee. Since I'm not
sure if it's possible to totally remove the node at this stage,
it emits a no-op function call to copy the input vector.
Differential Revision: https://developer.blender.org/D14045
Viewport cull bones during selection to avoid depth-picking
reading the depth buffer for bones that aren't in the viewport.
Files with thousands of bones could hang blender for seconds while
selecting. The issue could still happen with overlapping bones or when
zoomed out so all bones are under the cursor, however in practice this
rarely happens.
Now files with many bones select quickly.
Related changes include:
- Split `BKE_pchan_minmax` out of `BKE_pose_minmax`.
- Add `mat3_to_size_max_axis` to return the length of the largest
axis (used for scaling the radius).
Reviewed By: sybren
Maniphest Tasks: T91253
Ref D13990
This new info simplifies greatly the handling of resync and deleting
liboverride hierarchies, and makes those operations more robust to
complex dependencies cases between different hierarchies.
Related to T95283.
This change will make handling of liboverrides hierarchies (especially
resyncing) much easier and efficient. It should also make it more
resilient to 'degenerate' cases, and allow proper support of things like
parenting an override to another override of the same linked data (e.g.
a override character parented to another override of the same
character).
NOTE: this commit only implements minimal changes to add that data and
generate it for existing files on load. Actual refactor of resync code
to take advantage of this new info will happen separately.
This change will make handling of liboverrides hierarchies (especially
resyncing) much easier and efficient. It should also make it more
resilient to 'degenerate' cases, and allow proper support of things like
parenting an override to another override of the same linked data (e.g.
a override character parented to another override of the same
character).
NOTE: this commit only implements minimal changes to add that data and
generate it for existing files on load. Actual refactor of resync code
to take advantage of this new info will happen separately.
Previously, node selection made no distinction between a frame node and
other nodes. So a frame node would be selected by their whole rect or
center (depending on box/lasso/circle select). As a consequence of this,
box and lasso could not pratically be started inside a frame node (with
the intention to select a subset of contained child nodes) because the
frame would be selected immediately and tweak-transforming started.
Circle selecting would always contain the frame node as well (making
transforming a subset of nodes without also transforming the whole frame
impossible).
Now change selection behavior so that for all selection modes only the
border [the margin area that is automatically added around all nodes,
see note below] of a frame node is considered in selection. This makes
for a much more intuitive experience when arranging nodes inside frames.
note: to make the area of interest for selection/moving more obvious,
the cursor changes when hovering over (as is done for resizing).
note: this also makes the resize margin consistent with other nodes.
note: this also fixes right resize border (was exclusive instead of
inclusive as every other border)
Also fixes T46540.
This adds an option to the "Select Similar" operator in edit mode to
select vertices based on vertex crease similarity. The implementation
follows that of the edge crease, with a 1-dimensional KD-tree used to
store and retrieve vertex indices base on crease values.
To maintain compatibility with old files (scripts), the `SIMEDGE_CREASE`
enumeration identifier remains `CREASE`, while the one for the new
`SIMVERT_CREASE` is `VCREASE` to follow the naming convention of other
enum values.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D14037
This Diff changes the computation of the input and output socket
position to being always aligned with its corresponding label.
Reviewed By: campbellbarton
Ref D14025
Regression in 51befa4108
caused negative values to overflow into a uint64_t.
Resolve by casting to a signed int from originally signed types.
This caused D14033 not to work properly.
Assign the actual value before casting to large uint64_t/double types.
This improves readability, especially in cases where both pointer
and integer casts were used in one expression, to make matters worse
clang-format treated these casts as a multiplication.
This also made debugging/printing the values more of a hassle.
No functional changes (GCC produced identical output).
Account for `CurveEval`, which stores the proper deformed and
procedurally created data, unlike the `nurb` list, which has always
just meant a copy of the original curve.
Also account for the case when the curve is empty by using a -1, 1,
fallback bounding box in that case, just like mesh objects.
The problem was that nullptr was returned which is a valid value for
Mesh * and hence the returned optional was treated as having some value.
There was no check for point clouds so that was fixed as well.
Differential Revision: https://developer.blender.org/D14026
Based on discussions from T95355 and T94193, the plan is to use
the name "Curves" to describe the data-block container for multiple
curves. Eventually this will replace the existing "Curve" data-block.
However, it will be a while before the curve data-block can be replaced
so in order to distinguish the two curve types in the UI, "Hair Curves"
will be used, but eventually changed back to "Curves".
This patch renames "hair-related" files, functions, types, and variable
names to this convention. A deep rename is preferred to keep code
consistent and to avoid any "hair" terminology from leaking, since the
new data-block is meant for all curve types, not just hair use cases.
The downside of this naming is that the difference between "Curve"
and "Curves" has become important. That was considered during
design discussons and deemed acceptable, especially given the
non-permanent nature of the somewhat common conflict.
Some points of interest:
- All DNA compatibility is lost, just like rBf59767ff9729.
- I renamed `ID_HA` to `ID_CV` so there is no complete mismatch.
- `hair_curves` is used where necessary to distinguish from the
existing "curves" plural.
- I didn't rename any of the cycles/rendering code function names,
since that is also used by the old hair particle system.
Differential Revision: https://developer.blender.org/D14007
This patch makes it possible to set the UI color of a node's
header bar and override the default from the node's typeinfo.
Currently the color is taken from the `.nclass`
member of the node's bNodeType->TypeInfo struct.
This is created once when registering the node.
The TypeInfo is used for both UI and non-UI functionality.
Since the TypeInfo is shared, the header bar for the node
can't be changed without changing all nodes of that type.
The Map Range node is shown as a `Converter` or blue color by default.
This patch allows this to be changed dynamically to `Vector` or purple.
This is done by adding a `ui_class` callback to node typeinfo struct.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D13936
If the console was hidden on windows, it would
be made visible during shutdown in an effort
not hide a potentially active interactive console
session. This however did not take in account
if blender was actually launched from an interactive
console causing the console window to briefly flash
during shutdown even when launched from the new
launcher, the brief flash concerned some users.
This change adjusts the behaviour to restore the
console only when blender was started from the
console.
Reviewed By: LazyDodo
Differential Revision: https://developer.blender.org/D14016
If the "Asset Indexing" option was disabled in Preferences > Experimental
> Debugging, the asset-view template (used by pose libraries for
example) would still use the indexing.
Previously, nearest interpolation filter was used for preview, because
it offered good performance and bilinear was used for rendering. This
is not always desirable behavior, so filter method can now be chosen by
user. Chosen method will be used for preview and for rendering.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D12807
Dashed line display was changed since 2.7x, using white on black
instead of grey on black.
This made selection difficult to see as white is brighter
than the default selected color.
Match the grey used in 2.7x.
This patch from Henrik Dick improves the continuity between the
grid forming corners and the edge polyons on multisegment bevels.
For details, see patch D13867.
Fixes T95384. New exporter was missing a fix for T94516 that recently got applied to the python exporter.
Also changed the obj export tests code so that when save_failing_test_output is requested and MTL result is different from the golden expectation, it is saved as well, similar to how it's done for the OBJ file result.
This change from Aras further parallelizes wihin large meshes (the previous one
just parallelized over objects).
Some stats: on A Windows machine, AMD Ryzen (32 threads):
(one mesh) Monkey subdivided to level 6: 4.9s -> 1.2s (blender 3.1 was 6.3s; 3.0 was 49.4s).
(one mesh) "Rungholt" minecraft level: 8.5s -> 2.9s (3.1 was 10.5s; 3.0 was 73.7s).
(lots of meshes) Blender 3 splash: 6.2s -> 5.2s (3.1 was 48.9s; 3.0 was 392.3s).
On a Linux machine (Threadripper, 48 threads, writing to SSD):
Monkey - 5.08s -> 1.18s (4.2x speedup)
Rungholt - 9.52s -> 3.22s (2.95x speedup)
Blender 3 splash - 5.91s -> 4.61s (1.28x speedup)
For details see patch D14028.
Caused by rBf75449b5f2b04b79, which was missing a null check when
attempting to extract a `CustomData` pointer from an mesh that might
be null if the object isn't a mesh object. The commit added null checks
elsewhere, so simply adding them here is a straightforward fix.
Fixes T95526, T95539
Also fixed conflicts due to the change in file writing in the new obj exporter
in master, and fixed one of the tests that was added in master but not 3.1.
The new wavefront .obj exporter in 3.1 was producing slightly invalid parm line syntax (missing u), and was not setting first/last N params to zeroes and ones for curves with "endpoint" flag properly.
Removes unnecessary calls to blf_glyph_cache_find, simplifies
blf_font_size, and reduces calls to it. blf_glyph_cache_new
and blf_glyph_cache_find made static.
See D13374 for more details.
Differential Revision: https://developer.blender.org/D13374
Reviewed by Campbell Barton
Allowing setting and storing of the default font size as float.
See D13230 for more details.
Differential Revision: https://developer.blender.org/D13230
Reviewed by Campbell Barton
Removal of declaration of unused blf_font_draw_ascii
See D13624 for more details.
Differential Revision: https://developer.blender.org/D13624
Reviewed by Campbell Barton
Cache the font size's ideal fixed width column size in the glyph cache
rather than the font itself to improve performance.
See D13226 for more details.
Differential Revision: https://developer.blender.org/D13226
Reviewed by Campbell Barton
blf_glyph_cache_free does not need to be public.
See D13395 for more details.
Differential Revision: https://developer.blender.org/D13395
Reviewed by Campbell Barton
`viewops_data_alloc` allocates and stores some pointers in
`ViewOpsData` while `viewops_data_create` reuses already stored
pointers and also stores others in `ViewOpsData`.
The similar names and usages can confuse and in this case it also
creates a dependency on the order in which these functions are called.
Merging these functions simplifies usage and deduplicates code.
Since we have a node that sets a mesh's auto smooth angle
(unfortunately, in retrospect), we generally can't assume at all
that value is the same as whatever input mesh. Similar asserts
were removed previously in 8216b759e9. While the attempt
at assertions to clarify assumptions is noble, this one doesn't
make sense anymore.
I found this while investigating T95479.
Differential Revision: https://developer.blender.org/D14009
- Fix image.format conversion to string
- Fix warnings about ARB_conservative_depth not found even if GL > 4.2
- Add `array(type)` define for portable array definition
Thanks to the new `ShaderCreateInfo` we now include source files without
any modification. This let us query which are the source files passed to the
`print_log` function. The log will now include a file with row and column
number which is interpreted as a link in most IDE.
DEBUG_CONTEXT_LINES will add more lines around the error lines for more
context. This is also useful if the error line is imprecise (because of
driver bugs) and the reported line is not sufficient to know the location
of the error.
The DEBUG_DEPENDENCIES option will display the list of included files in
the shader sources. Note that it will not print generated source.
This commit also fixes some issues with unhelpful logs, bogus row & column
numbers, other error format, and bug if row was 0.
Source files are now only referenced and listed for the driver to ingest.
Shader sources now includes generated data if any.
Also cleans up gpu_shader_dependency_get_builtins casts.
This includes multiple commits:
- Fix crash when using std::cerr for error output
- Add auto_resource_location which overrides all resources location (not vert input)
- Improve codestyle of error reporting.
- Add type conversion to string and to `eGPUType`
- Add comparison operator (will be used for hash collision resolution).
- Add members related to generated code (codegen)
Detected on `amdgpu-pro` libGL implementation. The workaround is to not
use explicit location for vertex attributes. This is not a real problem
as we don't rely on them for now.
This was an oversight in the patch that added this node,
the default merge distance is meant to be the same as the weld
modifier, 0.001m, meaning by in most situations it removes
vertices generally at the same location.
- Compute ref let the size of dispatch be modified just before drawing.
- Barrier call makes it possible to chain multiple compute passes in one pass.
- DRW_shgroup_vertex_buffer_ref is the analog of DRW_shgroup_uniform_block_ref.
Since we have a node that sets a mesh's auto smooth angle
(unfortunately, in retrospect), we generally can't assume at all
that value is the same as whatever input mesh. Similar asserts
were removed previously in 8216b759e9. While the attempt
at assertions to clarify assumptions is noble, this one doesn't
make sense anymore.
I found this while investigating T95479.
Differential Revision: https://developer.blender.org/D14009
This commit adds infrastructure for 8 bit signed integer attributes.
This can be useful given the discussion in T94193, where we want to
store spline type, Bezier handle type, and other small enums as
attributes.
This is only exposed in the interface in the attribute lists, so it
shouldn't be an option in geometry nodes, at least for now.
I expect that this type won't be used directly very often, it
should mostly be cast to an enum type. However, with support
for 8 bit integers, it also makes sense to add things like mixing
implementations for consistency.
Differential Revision: https://developer.blender.org/D13721
Required to solve a crash on windows (T95367)
Mostly an uneventful update, except for FreeType
giving its cmake options a rename.
Reviewed By: brecht, sybren
Differential Revision: https://developer.blender.org/D13968
Every translation unit that included the modified headers generated
some extra code, even though it was not used. This adds unnecessary
compile time overhead and is annoying when investigating the
generated assembly.
Initialization with `MEM_new()` depends a lot on the initialization rules
of C++, which are not obvious. Calling it with no arguments to be passed
to the constructor may cause the resulting object to be implicitly 0
initialized (or parts of it). This can have an impact on performance
sensitive code, so it's something to document.
Alternatively we could enforce default initialization (as opposed to the
value initalization that happens now), but this could cause
uninitialized memory in a way that isn't obvious either. This is a
possible source of bugs, so Jacques and I decided against it.
Use the global F2 rename panel for the NLA editor to rename NLA strips.
Reviewed By: sybren, RiggingDojo
Differential Revision: https://developer.blender.org/D12300
It was missing framework flags added in `setup_platform_linker_flags`.
Keep it off until QuickLook Thumbnailing is implemented.
Differential Revision: https://developer.blender.org/D13997
The check for existence of custom data layers did not take wrapper nature of
mesh into account.
Quickest and safest for 3.1 solution is to take care of branching of checks
in the draw manager.
Ideally both wrapper and mesh access will happen via the same public API
without branching in the "user" code. That is something outside of the fix
for the coming release though.
Differential Revision: https://developer.blender.org/D14013
This callback was only needed to allow specific handling of proxies, now
that theses have been removed the generic
`BKE_lib_id_make_local_generic` code works for objects as well.
Byte images are converted to float. Due to an issue how VSE cache is
freeing its images we cannot store these float buffers what leads
to recalculating it for each change in the image editor.
This fix will reduce the slowdown to areas that have the root cause of
the memory leak, so the buffers can be reused between refreshes.
NOTE: The root cause should still be fixed.
Thanks for reporting Sybren!
Didn't cause visible issues, because the layout uses spacers to
right-align text, which happens to use the region size with pixel-size
applied for calculations.
Some navigation operators check flags like `RV3D_LOCK_ROTATION` in the
invoke function to see if the operation can be performed.
As the comment indicates, these checks should be in the poll function.
This avoids redundant initialization.
Note that this brings functional changes as now operators with context
`EXEC_DEFAULT` will also be affected by the flag.
(There doesn't seem to be a problem with the current code).
Differential Revision: https://developer.blender.org/D14005
The strings in the `get_description` functions for operators need
translation, they are not found by the translation system automatically,
and there is no translation applied afterwards either (as far as I could
tell). Some used `N_` before, but most did nothing.
Differential Revision: https://developer.blender.org/D14011
The case where Y rotation is mapped to Y rotation was not handled.
This is now fixed.
Also added an automated test to make sure that the symmetrize operator
functions as intended.
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D9214
This was caused by macros interpreted as recursive. Workaround by
not using macros at all and just define local variables which
hopefully will be optimized.
This was caused by macros interpreted as recursive. Workaround by
not using macros at all and just define local variables which
hopefully will be optimized.
Crash introduced by {rB0cb5eae}.
When switching to between drawing modes the region.draw_buffer could be
uninitialized when the gizmo depth test is performed. When the mouse is
placed on top of a gizmo part that could be highlighted would crash.
This fix adds a early exit when depth testing is requested, but there
isn't a draw_buffer. Not sure this is an root cause fix.
Reported by multiple animators in Blender Studio.
Technically, this can't be relied upon in the long term. It worked more or
less accidentally before. It was broken by a previous fix accidentally. I mainly
bring it back because rBa985f558a6eb16cd6f0 was not expected to have
this side effect.
Note, this change can result in slower performance. Writing to a vertex
groups is less efficient than using a generic attribute.
Previously, these methods used the more generic substring-finding
algorithm, which is more complex and slower.
Using the more specialized methods results in a noticable speedup
in the obj importer (D13958).
Differential Revision: https://developer.blender.org/D14012
When viewing backdrop on top of the node grid, the grid would be
rendered black when the mode wasn't set to RGBA. This fix fixes this by
reverting the previous fix of drawing the backdrop and implement a
different one that recomputes the UV coordinates on the screen edges.
DNAstr was assumed to be 4-byte aligned which is not necessarily
the case for byte-arrays.
Use a compiler attribute to ensure this is the case.
Thanks to @mtasaka for investigating and providing a patch.
Part of T91671.
Not much else to say, this is mainly a massive deletion of code.
Note that a few cleanups possible after this proxy removal were kept out
of this commit to try to reduce a bit its size.
Reviewed By: sergey, brecht
Maniphest Tasks: T91671
Differential Revision: https://developer.blender.org/D13995
This doesn't make a user visible difference since it's only used for
brackets at the moment, this is more for general correctness as the
width calculation for mono-spaced text drawing is different
(as it uses BLI_wcwidth).
ED_transverts_create_from_obedit expected an evaluated object.
Add flag to request TX_VERT_USE_MAPLOC to be set, which avoids having to
calculate this data when it's not used as well as the requirement
that the input object be evaluated from the depsgraph.
This fixes the crash by removing the `do_view3d_header_buttons` handler.
The code can work at a higher level here, using the operator for setting
the select mode, which makes this patch a cleanup as well.
The operator now has a description callback to add the custom
description used for the behavior in its invoke method.
Differential Revision: https://developer.blender.org/D13660
Since f59767ff97, these hair layer types are unused. Since DNA
compatibility was broken with any files that would contain them, the
indices can be reused to avoid growing custom data's typemap.
In the future when we have a docs staging area it will be
important to change where this JSON is pulled from.
For now, always pull from the "Production" versions
This commit adds a version switch similar to the one on the user manual,
in the future it would be nice to refactor both of these into a more generic
code that works for both. Maybe develop this into a sphinx extension.
As part of this change I had to change how the blender hash is displayed.
Instead of the version hash in the top left it has been moved to the page footer.
This change will also be backported to 2.93 LTS, 2.93 LTS, and 3.0.
This patch refactors the "Hair" data-block, which will soon be renamed
to "Curves". The larger change is switching from an array of `HairCurve`
to find indices in the points array to simply storing an array of offsets.
Using a single integer instead of two halves the amount of memory for that
particular array.
Besides that, there are some other changes in this patch:
- Split the data-structure to a separate `CurveGeometry`
DNA struct so it is usable for grease pencil too.
- Update naming to be more aligned with newer code and the style guide.
- Add direct access to some arrays in RNA
-- Radius is now retrieved as a regular attribute in Cycles.
-- `HairPoint` has been renamed to `CurvePoint`
-- `HairCurve` has been renamed to `CurveSlice`
- Add comments to the struct in DNA.
The next steps are renaming `Hair` -> `Curves`, and adding support
for other curve types: Bezier, Poly, and NURBS.
Ref T95355
Differential Revision: https://developer.blender.org/D13987
This is partially caused by a stupid mistake in cfa53e0fbe
where I missed initializing the `vert_normals` pointer in
`MResolvePixelData`. It's also caused by questionable assumptions
from DerivedMesh code that vertex normals would be valid.
The fix used here is to create a temporary mesh with the data necessary
to compute vertex normals, and ensure them here. This is used because
normal calculation is only implemented for `Mesh` and edit mesh, not
`DerivedMesh`. While this might not be great for performance, it's
potentially aligned with future refactoring of this code to remove
`DerivedMesh` completely. Since this is one of the last places the data
structure is used, that would be a great improvement.
Differential Revision: https://developer.blender.org/D13960
Iterating over scene's objects while we modify those (through proxy to
override conversion code) is call for problems (use after free etc.).
Instead, all proxy objects need to be gathered first in a temporary
list, and processed all at once in a second loop.
`BKE_collection_object_add` ensures given object is added to an editable
collection, and not e.g. a linked or override one.
However, some processes like do_version manipulate collections also from
libraries, i.e. linked collections, in those cases we need a version of
the code that unconditionnally adds the given object to the given
colleciton.
This is from patch D13988. It removes the "- New" from the menu of the
new obj exporter, changes the default addon to just io_import_obj,
and does the right versioning thing.
Also disables the python tests for the old python exporter.
This patch reverts the normal behavior of the spotlights. In the last fix,
the returned normal of a spot light was equal to its direction. This broke
some texturing methods used by artists.
Differential Revision: https://developer.blender.org/D13991
The view3d_edit.c file is already getting big (5436 lines) and mixes
operators of different uses.
Splitting the code makes it easier to read and simplifies the
implementation of new features.
Differential Revision: https://developer.blender.org/D13976
Those cases are fairly hard to track down... Added some more checks,
also at lower levels, more generic levels of object editing, and fixed
core check in liboverride (previously code was assuming that an override
of a collection only could have overrides of objects or linked objects,
but this is not necessarily true).
This is from patch D13988. It removes the "- New" from the menu of the
new obj exporter, changes the default addon to just io_import_obj,
and does the right versioning thing.
Also disables the python tests for the old python exporter.
Use the ID.recalc flag to detect when updates after frame-change is
needed. Since comparing the last calculated frame doesn't take undo into
account (see code-comment for details).
`ID_RECALC_AUDIO_SEEK` has been renamed to `ID_RECALC_FRAME_CHANGE`
since this is not only related to audio however internally this flag is
still categorized in `NodeType::AUDIO`.
Reviewed By: sergey
Ref D13942
The issue was happening with a specific file where the ID management
code was not fully copying all modifiers because of the extra check
in the `BKE_object_support_modifier_type_check()`.
While it is arguable that copy-on-write should be a 1:1 copy there is
no real need to maintain the per-modifier pointer to its original.
Use its SessionUUID to perform lookup in the original datablock.
Downside of this approach is that it is a linear lookup instead of
direct pointer access, but the upside is that there is less pointers
to manage and that the file with unsupported modifiers does behave
correct without any asserts.
Differential Revision: https://developer.blender.org/D13993
The modifiers are mapped between original and evaluated objects based on
their session IDs. The pointer to original modifier is no longer needed
for the backup: it remained from the initial implementation which was
rewritten at some point.
This is a preparation for removal of the pointer to original modifier.
c9d9bfa84a caused a regression in when
the right-mouse select action was set to "Select & Tweak" (default).
Now the fallback tool works with RMB select as it did before.
This will allow to keep the access to deprecated DNA proxy data in that
specific file, instead of allowing deprecated accesses in the whole
override kernel code.
Part of T91671.
Part of the resynching code would access collections' objects base
cache, which can be invalid at that point (due to previous ID remapping
and/or deletion). Use a custom recursive iterator over collections'
objects instead, since those 'raw' data like collection's objects list,
and collection's children lists, should always be valid.
Found while investigating a studio production file.
This is a temp fix for a memory leak where the VSE isn't aware that a
float representation of the image could exist. The VSE somehow doens't
clears it (refcounter is still 1).
The work around is just to let the image engine clean up all the data it
created. Potential this would add more overhead when buffers are needed
more than once.
This refactors how output attributes are computed in the geometry
nodes modifier. Previously, all output attributes were computed one
after the other. Every attribute was stored on the geometry directly
after computing it. The issue was that other output attributes might
depend on the already overwritten attributes, leading to unexpected
behavior.
The solution is to compute all output attributes first before changing the
geometry. Under specific circumstances, this refactor can result in a speedup,
because output attributes on the same domain are evaluated together now.
Overwriting existing might have become a bit slower, because we write the
attribute into new buffer instead of using the existing one.
Differential Revision: https://developer.blender.org/D13983
Mistake in the 974981a637: f the edit data is not present then the
origindex codepath is to be used. Added a brief note about it on the
top of the file.
More ideally would be to remove edit mesh from non-bmesh-wrappers
but this would require changes in the draw manager to make a proper
decision about drawing edit mode overlays.
Now all proxies will always be converted to library overrides. If
conversion fails, they are simply 'disabled'.
This should be the last 'user-visible' step of proxies removal.
Remaining upcoming commits will remove internal ID management, depsgraph
and evaluation code related to proxies.
Also bump the blendfile subversion.
Part of T91671.
So far linked proxies were just kept as-is, this is no longer an option.
Attempt to convert them into liboverrides as much as possible, though
some cases won't be supported:
- Appending proxies is broken since a long time, so conversion will fail
here as well.
- When linking data, some cases will fail to convert properly. in
particular, if the linked proxy object is not instanced in a scene
(e.g. when linking a collection containing a proxy as an
epty-instanced collection instead of a view-layer-instanced collection).
NOTE: converion when linking/appending is done unconditionnaly, option
to not convert on file load will be removed in next commit anyway.
Part of T91671.
This will help when dealing with liboverrides from other library files,
e.g for resync or proxies conversion.
This commit only affects proxy conversion.
Part of T91671.
We have this node for shader and geometry nodes. Compositor can also
work with vectors, and this can help with that.
Reviewed By: manzanilla
Maniphest Tasks: T95385
Differential Revision: https://developer.blender.org/D12919
The geometry nodes modifier currently always adds a dependency
relation from the evaluated geometry to the object transform. However,
that can be avoided unless there is a collection or object info node in
"Relative" mode.
In order to avoid requiring dependency graph relations updates often
when editing a node tree, this patch doesn't check if the node is muted
or if the data-block sockets are empty before adding the dependency.
Fixes T95265
Differential Revision: https://developer.blender.org/D13973
Function `IMB_indexer_get_seek_pos()` can return non 0 seek position for
frame index 0. This causes seeking to incorrect GOP and scanning ends
with failiure.
Hard-code first frame index seek position to 0.
Differential Revision: https://developer.blender.org/D13974
Some items on the Quick Setup screen can be truncated with some
languages and/or with High DPI monitors. This patch adjusts column
sizes and turns off the expand on Spacebar options, making everything
fit a bit better.
See D9853 for more details.
Differential Revision: https://developer.blender.org/D9853
Reviewed by Julian Eisel
Using opt-in instead of opt-out to make code easier to read.
Add combined flag enum.
Making restrict an inverse flag option because it is so rare to
use it.
This adds the possibility to use the `gpu_BaryCoord[NoPersp]`
builtin to support barycentric coordinates without geometry shader.
The `BuiltinBits::LAYER` builtin needs to be manually added
to the `GPUShaderCreateInfo` in order to use this feature.
Note: This is only available for shaders using `GPUShaderCreateInfo`.
A geometry shader fallback is generated if the extension
`AMD_shader_explicit_vertex_parameter` is not available.
`NV_fragment_shader_barycentric` was not considered because it is not
present inside the `glew.h` with use and seems to only be available
with vulkan.
This adds the possibility to use the `gpu_Layer` builtin to
support layered rendering without geometry shader.
The `BuiltinBits::LAYER` builtin needs to be manually added
to the `GPUShaderCreateInfo` in order to use this feature.
Note: This is only available for shaders using `GPUShaderCreateInfo`.
A geometry shader fallback is generated if the extension
`AMD_shader_explicit_vertex_parameter` is not available.
- Scan all static shaders for builtins on startup.
- Add possibility to manually add builtins.
- `ShaderCreateInfo.builtins_` contain builtins from all stages.
If an entire cyclic stroke was selected, calling "Separate by Points"
would leave a gap in the new object (making the new stroke non-cyclic).
The patch makes sure that if we separate by points and all points are
selected, we fall back to separate by stroke.
Reviewed By: antoniov
Maniphest Tasks: T91463
Differential Revision: https://developer.blender.org/D12527
This patch fixes the error that pops up
(`Error: Unable to execute '... Mode Toggle', error changing modes`)
when trying to switch to e.g. draw mode from a grease pencil object
that was saved in draw mode in an inactive scene when the file was loaded.
Note that this does not fix the bigger issue described in T91243.
The fix makes sure that we reset all the mode flags on the grease pencil
data when we set the mode to object mode.
Reviewed By: antoniov
Maniphest Tasks: T89514
Differential Revision: https://developer.blender.org/D12419
When adding an asset library in the Preferences, set the name of the new
library to the chosen directory's name by default. That avoids having to
set it manually which can be annoying. Previously I thought it would be
nice to show the name button in red then, making the user aware that
they have to give it a name, but that appears to be more annoying than
useful/practical after all.
The issue was that the code only looked at `dob->ob`
instead of `dob->ob_data` which is necessary since
rB5a9a16334c573c4566dc9b2a314cf0d0ccdcb54f.
This now uses the same pattern that is used in other places
where `BKE_object_replace_data_on_shallow_copy` is used.
Blender would have crashed when renaming bone in Edit Mode, Saving, and
than selecting/deselecting.
Caused by a mistake in the 0f89bcdbeb: can not "short-circuit" the
CoW update if it was explicitly requested.
Safest for now solution seems to be to store whether the CoW component
has been explicitly tagged, so that the following configuration can be
supported:
DEG_id_tag_update(id, ID_RECALC_GEOMETRY);
DEG_id_tag_update(id, ID_RECALC_COPY_ON_WRITE);
Differential Revision: https://developer.blender.org/D13966
Since splitting the depth and the color shader in the image engine the
backdrop wasn't visible anymore. The reson is that the min max uv
coordinates were never working for the node editor backdrop that uses
its own coordinate space.
This partial fix will ignore the depth test when drawing the color part
of the backdrop. This will still have artifacts that are visible when
showing other options as RGBA.
Proper fix would be to calculate the the uv vbo in uv space and not in
image space.
Can also happen in other places when the overlay engine is active. Some
parts of the overlay engine uses builtin shaders, but disable the color
space conversion to the target texture.
Currently there the overlay engine has its own set of libraries it could
include and defined a macro to pass-throught the color space conversion.
The library include mechanism currently fails when it couldn't find the
builtin library in the libraries of the overlay engine. This only
happened in debug mode.
This change will not fail, but warns the developer if a library could
not be included. In the future this should be replaced by a different
mechanism that can disable the builtin library. See {T95382}.
Since d9c6ceb3b8 partial updates to
normals in sculpt-mode were accumulating into the current normal
instead of a zeroed value.
Zero vertex normal values tagged for calculation before accumulation.
Reviewed By: HooglyBoogly
Ref D13975
From investigating T95185, it's important the normal returned by
SCULPT_vertex_normal_get always match the PBVH normal array.
Since this is always initialized in the PBVH, there is no advantage
in storing the normal array in two places, it only adds the possibility
that changes in the future causing different meshes normals to be used.
Split out from D13975.
Since 0ea0ccc4ff, `AV_PIX_FMT_YUV444P` pixel format was used for
lossless renders, which did override `AV_PIX_FMT_YUVA420P` format when
"RGBA" output is chosen. VP9 encoder doesn't seem to support
`AV_PIX_FMT_YUVA444P` pixel format, so use `AV_PIX_FMT_YUVA420P` for
lossless RGBA ouput instead.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D13947
Currently, audio and video strips are synchronized based on data from
media stream, which is nice, but this causes gaps between strips.
This synchronization was implemented by moving movie strip position
relative to sound, which doesn't make much sense for user which is
mostly interested in editing video.
Code was bit hard to read, so it has been simplified. Ideally video
stream time would be easily accessible so synchronization could be done
at any time, but this is not necessary at this point.
Reviewed By: zeddb
Differential Revision: https://developer.blender.org/D13948
Correct corner radius of the node outline to prevent a noticeable gap in
some cases.
---
Currently we make a small mistake in the creation of the node outline:
We offset the rectangle describing the outline by the outline thickness,
but we don't adjust the corner radius accordingly.
Therefore the rounded corner of the outline and the node body are not
concentric which can sometimes lead to a visible gap at the corner.
How noticeable it is depends on the theme, the screen's dpi and the
line thickness set in the preferences.
Simply adjusting the corner radius for the outline to also be increased
by the outline thickness fixes this small issue.
| display, line thickness | **patch** | **master** |
| --- | --- | --- |
| 1080p, default/thin | {F12835304} | {F12835305} |
| retina, thin | {F12835306} | {F12835307} |
The issue was mentioned by @hitrpr
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D13955
Use the evaluated mesh to generate the Adjacent Faces margin.
Baking used the evaluated mesh, but generating the margin used the base
mesh. This would lead to generating the margin from a stale UV map when the
UV editor was open and the UV map was changed. Fix it by passing the same
mesh as used for baking through to the margin generation.
Differential Revision: https://developer.blender.org/D13938
The new adjacent faces method border lookup fails in some directions around
45 degrees
* Use 8 Dijkstra directions (also diagonally) to determine which polygon is the
closest to each pixel. Using only Manhattan distance lead to large parts of
the texture which were matched with the wrong polygon.
* Use neighbroing polygons for edge search. The Adjacent Faces algorithm needs
to determine the closest edge, in UV space, each pixel. To speed this up
first as map is built which finds the closest polygon for each pixel along
horizontal, vertical and diagonal steps. Because this can sometimes be one
edge off we first look in the polygon from the map, if that fails also
check the edges of its neighbouring UV polygons.
Differential Revision: https://developer.blender.org/D13935
For those EEVEE passes a bit of trickery with pointer offsets allows to
get the owning viewlayer, so path generation is not too bad.
Also moved ViewLayer path generation itself into a public utils, to
avoid duplicating code.
NOTE: Doing the same for AOV would be needed, but since pointer offsets
won't help us here to find the owning viewlayer, not sure how to do it
nicely yet (only solution I think is to loop over all AOVs of all
ViewLayer of the scene to find it :( ).
Reported by Beau Gerbrands (@Beaug), thanks.
Image buffer was visible but buffer wasn't available. In the case
the color only overlay of the render result was displayed the image
buffer was not check to be valid.
This patch adds a null pointer check to check in `IMB_alpha_affects_rgb`
to solve this crash.
This commit specifies the exact Python version which is included in the
package name, thereby allowing `install_deps.sh` to suggest
"`-D PYTHON_VERSION=3.10`" correctly.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D13925
Empty (UDIM) tiles where drawn with a transparency checkerboard. They
should be rendered with a border background. The cause is that the image
engine would select a single area that contained all tiles and draw them
as being part of an image.
The fix is to separate the color and depth part of the image engine
shader and only draw the depths of tiles that are enabled.
While this didn't cause any user visible bugs, this wouldn't
have behaved as intended since the timer would never run again once
wmTimer.ntime was set to NAN.
GPU_select originally used GL_SELECT which defined the format for
storing the selection result.
Now this is no longer the case, define our own struct - making the code
easier to follow:
- Avoid having to deal with arrays in both `uint*` and `uint(*)[4]`
multiplying offsets by 4 in some cases & not others.
- No magic numbers for the offsets of depth & selection-ID.
- No need to allocate unused members to match GL_SELECT
(halving the buffer size).
Remove functions and function pointers that were never set or never
used at all. The "tessface" original index handling in `subsurf_ccg.c`
can be removed because the data was never used.
This function and flags weren't used outside of DerivedMesh
code, and since the plan is to remove the data structure, it makes
sense to remove complexity where possible.
This is a patch from Aras Pranckevicius, D13927. See that patch for full
details. On Windows, the many small fprintfs were taking up a large amount
of time and significant speedup comes from using snprintf into chained buffers,
and writing them all out later.
On both Windows and Linux, parallelizing the processing by Object can also lead
to a significant increase in speed.
The 3.0 splash screen scene exports 8 times faster than the current C++ exporter
on a Windows machine with 32 threads, and 5.8 times faster on a Linux machine
with 48 threads.
There is admittedly more memory usage for this, but it is still using 25 times
less memory than the old python exporter on the 3.0 splash screen scene, so
this seems an acceptable tradeoff. If use cases come up for exporting obj files
that exceed the memory size of users, a flag could be added to not parallelize
and write the buffers out every so often.
Previously, the new obj exporter was only exporting per-vertex normals for faces
marked as "smooth". But a face can have custom normals, as soon as the normals
data layer exists. This change makes it follow the behavior of USD & Collada
exporters and the old Python one, which also export per-vertex normals as soon
as the layer is there. (From Patch D13957.)
This is similar to e032ca2e25 which removed the
callback for volumes. Now that we have geometry sets, there is
no need to define a callback for every data type, and this wasn't
used. Procedural curves/hair editing will use nodes rather than new
modifier types anyway.
Since `event->xy` is now an array these functions can be
simplified to accept the sample point as an array.
Clarifications were also made to variable names:
- `eye->last_x/y` --> `eye->cursor_last`
- `mx/my` --> `cursor`
Differential Revision: https://developer.blender.org/D13671
Previously, macros were ifdefed using the cmake option `WITH_INTERNATIONAL`
However, the is unnecessary as withen the functions themselves have checks for building without internationalization.
This also means that many `add_definitions(-DWITH_INTERNATIONAL)` are also unnecessary.
Reviewed By: mont29, LazyDodo
Differential Revision: https://developer.blender.org/D13929
This fixes a regression from rBa0edee712a79239133ff840f911f6416d4c41855.
Issue being the curve map not being initialized in the GPU shader function.
Fixes T95221
This fixes a regression from rBa0edee712a79239133ff840f911f6416d4c41855.
Issue being the curve map not being initialized in the GPU shader function.
Fixes T95221
As part of the project of converting `MVert` into `float3`
(more details in T93602), this is an easy step, since it
is only locally used runtime data. In the six places it was
used, the flag was replaced by a local bitmap.
By itself this change has no benefits other than making some
code slightly simpler. It only really matters when the other
flags are removed and it can be removed from `MVert`
along with the bevel weight.
Differential Revision: https://developer.blender.org/D13878
For every spline, *all* of the normals and tangents in the output
were normalized. The node is multithreaded, so sometimes a thread
overwrote the normalized result from another thread.
Fixing this problem also made the node orders of magnitude
faster when there are many splines.
Show a more instructive error message for users who have plugged
multiple monitors into multiple display adapters. And do not exit
if unable to open a child window when in this state.
See D13885 for more details
Differential Revision: https://developer.blender.org/D13885
Reviewed by Ray Molenkamp
The GLSL defines used to make the uniform names unusable for local variable
is being interpreted as recursive on some implementation.
This avoids it by create a second macro avoiding the recursion.
Allow Windows IME Pinyin, when in Chinese mode, to use numpad decimal
key to enter decimal point.
See D13902 for more details.
Differential Revision: https://developer.blender.org/D13902
Reviewed by Brecht Van Lommel
Convert Ideographic Full Stop, used in Simplified Chinese and Japanese,
to Decimal Point when entering numbers into numerical inputs.
See D13903 for more details
Differential Revision: https://developer.blender.org/D13903
Reviewed by Brecht Van Lommel
This patch adds a "OneDrive" icon to the File Manager System list for
Windows (only!).
See D11133 for more details.
Differential Revision: https://developer.blender.org/D11133
Reviewed by Julian Eisel
Initialize m_Bar, m_dropTarget, & m_hWnd members of GHOST_WindowWin32
in constructor's member initializer list. This ensures they are are
set or NULL in destructor if constructor does not complete.
See D13886 for more details.
Differential Revision: https://developer.blender.org/D13886
Reviewed by Jesse Yurkovich
Buttons can hold context and it's very useful to use this as a way to
let buttons provide context for drop operators.
For example, with this D13549 can make the material slot list set the
material-slot pointer for each row, and the drop operator can just query
that.
Sometime throughout development some checks got lost during refactor.
This change makes it so that if OIDN is not supported on the current
CPU Cycles will report an error and stop rendering. This behavior is
similar to when an OptiX denoiser is requested and there is no OptiX
compatible device available.
The easiest way to verify this change is to force return false from
the `openimagedenoise_supported()`.
Fixes Cycles part of the T94127.
Differential Revision: https://developer.blender.org/D13944
Parameter was used to still be compatible with the previous drawing mode.
The previous mode isn't available anymore so the parameter can should be
removed.
After showing the alpha in the image editor the setting was not reset
so all images in the editor showed as being transparent.
This commit fixes this by resetting the flag before updating.
In Outliner, 'Make Override Hierarchy' on an indirectly linked data would
fail in case some items higher up in the hierarchy also needed to be
overridden was also indirectly linked.
In Outliner, 'Make Override Hierarchy' on an indirectly linked data would
fail in case some items higher up in the hierarchy also needed to be
overridden was also indirectly linked.
Adding better support for drawing huge images in the image/uv editor. Also solved tearing artifacts.
The approach is that for each image/uv editor a screen space gpu texture is created that only contains
the visible pixels. When zooming or panning the gpu texture is rebuild.
Although the solution isn't memory intensive other parts of blender memory usage scales together with
the image size.
* Due to complexity we didn't implement partial updates when drawing images tiled (wrap repeat).
This could be added, but is complicated as a change in the source could mean many different
changes on the GPU texture. The work around for now is to tag all gpu textures to be dirty when
changes are detected.
Original plan was to have 4 screen space images to support panning without gpu texture creation.
For now we don't see the need to implement it as the solution is already fast. Especially when
GPU memory is shared with CPU ram.
Reviewed By: fclem
Maniphest Tasks: T92525, T92903
Differential Revision: https://developer.blender.org/D13424
This patch reimplements the image partial updates. Biggest design motivation for the redesign
is that currently GPUTextures must be owned by the image. This reduces flexibility and adds
complexity to a single component especially when we want to have different structures.
The new design is not limited to GPUTextures and can also be used by reducing overhead in image
operations like scaling. Or partial image updating in Cycles.
The usecase in hand is that we want to support virtual images in the image editor so we can
work with images that don't fit in a single GPUTexture.
Using `BKE_image_partial_update_mark_region` or `BKE_image_partial_update_mark_full_update`
a part of an image can be marked as dirty. These regions are stored per ImageTile (UDIM).
When a part of the code wants to receive partial changes it needs to construct a `PartialUpdateUser`
by calling `BKE_image_partial_update_create`. As long as this instance is kept alive the changes can
be received.
When a user wants to update its own data it will call `BKE_image_partial_update_collect_changes`
This will collect the changes since the last time the user called this function. When the partial changes
are available the partial change can be read by calling `BKE_image_partial_update_get_next_change`
It can happen that the introduced mechanism doesn't have the data anymore to construct the
changes since the last time a PartialUpdateUser requested it. In this case it will get a request
to perform a full update.
Maniphest Tasks: T92613
Differential Revision: https://developer.blender.org/D13238
Assert when "//" prefixed relative paths are passed to
BLI_path_cmp_normalized as this can't be expanded
and it's possible the paths come from different blend files.
Changes to recent addition: c85c52f2ce.
Having both BLI_paths_equal and BLI_path_cmp made it ambiguous
which should be used, as `BLI_paths_equal` wasn't the equivalent to
`BLI_path_cmp(..) == 0` as it is for string equals macro `STREQ(..)`.
It's also a more specialized function which is not used for path
comparison throughout Blender's internal path handling logic.
Instead rename this `BLI_path_cmp_normalized` and return the result of
`BLI_path_cmp` to make it clear paths are modified before comparison.
Also add comments about the conventions for Blender's path comparison
as well as a possible equivalent to Python's `os.path.samefile`
for checking if two paths point to the same location on the file-system.
The `OUTLINER_OT_item_activate` operator, although it detects when
something changes, always returns `OPERATOR_FINISHED` and thus induces
the creation of undo steps.
So return `OPERATOR_CANCELLED` when nothing changes.
Ref T94080
Reviewed By: Severin
Maniphest Tasks: T94080
Differential Revision: https://developer.blender.org/D13638
- Fix assert on size.
- Fix void * casting.
- Pass extent by values.
- Add swap function to avoid letting the types copyable.
- Add back the GPUTexture * operator on TextureFromPool.
Does two main changes:
* Handle regions in the order as visible on screen. Practically this
just means handling overlapping regions before non-overlapping ones.
* Don't handle any other regions after having found one containing the
mouse pointer.
Fixes: T94016, T91538, T91579, T71899 (and a whole bunch of duplicates)
Addresses: T92364
Differential Revision: https://developer.blender.org/D13539
Reviewed by: Campbell Barton
Asserts that such events actually always lead to a handler return value
that actually keeps the event passing.
Reviewed by Campbell Barton as part of
https://developer.blender.org/D13539.
Though the edge vertices aren't really meant to have an order,
it can make a difference in operations when there isn't any other
information to make decisions from, like etruding a circle of
loose edges (the situation in the report). This commit changes
the order of the vertices in the final cyclic edge to go in the
same direction as all of the other edges.
The vertex and face normals from the input mesh
were used to calculate the normals on the result,
which could cause a crash because the result should
be about twice as large.
Also remove an unnecessary dirty tag, since it is handled
automatically when creating a new mesh or in the case
of the mirror modifier, when calculating the new custom
face corner normals.
Swap "active" and "selected" in the tooltip if the `use_reverse_transfer`
option is activated.
Reviewed By: mont29
Maniphest Tasks: T85233
Differential Revision: https://developer.blender.org/D13499
Also fixes similar issues regarding some liboverride menu entries.
Reviewed By: mont29
Maniphest Tasks: T93766
Differential Revision: https://developer.blender.org/D13513
Add `USD Preview Surface From Nodes` export option, to convert a
Principled BSDF material node network to an approximate USD Preview
Surface shader representation. If this option is disabled, the original
material export behavior is maintained, where viewport setting are saved
to the Preview Surface shader.
Also added the following options for texture export.
- `Export Textures`: If converting Preview Surface, export textures
referenced by shader nodes to a 'textures' directory which is a
sibling of the USD file.
- `Overwrite Textures`: Allow overwriting existing texture files when
exporting textures (this option is off by default).
- `Relative Texture Paths`: Make texture asset paths relative to the
USD.
The entry point for the new functionality is
`create_usd_preview_surface_material()`, called from
`USDAbstractWriter::ensure_usd_material()`. The material conversion
currently handles a small subset of Blender shading nodes,
`BSDF_DIFFUSE`, `BSDF_PRINCIPLED`, `TEX_IMAGE` and `UVMAP`.
Texture export is handled by copying texture files from their original
location to a `textures` folder in the same directory as the USD.
In-memory and packed textures are saved directly to the textures folder.
This patch is based, in part, on code in Tangent Animation's USD
exporter branch.
Reviewed By: sybren, HooglyBoogly
Differential Revision: https://developer.blender.org/D13647
Downgrade the Python zstandard from 0.17.0 to 0.16.0. The Python package
should be linked against the exact same version of libzstd as Blender is,
otherwise it will refuse to load from within the Blender executable.
Python zstandard 0.17.0 links to 1.5.1, whereas we need 1.5.0.
`chardet` was replaced by `charset_normalizer` for modern `requests`.
With this change, `{make,ninja} install` will also copy the latter into
Blender's install directory.
This opt-in functionnality enabled developper keep track of unused
resources present in the `GPUShaderCreateInfo` descriptors of their
shaders.
The output is pretty noisy at the moment so we do not enforce its usage.
While install_deps tries to stay as close as possible from official
Blender versions of the libraries, it also strives to use as many distro
packages as possible.
OSL 1.11.16.0 is the minimal version that builds with llvm13, which is
the default llvm/clang version in e.g. Debian testing.
Adds two new attribute outputs:
"Line" outputs the line number of the character.
"Pivot Point" outputs the selected pivot point position per char.
Some refactoring of the text layout code.
Differential Revision: https://developer.blender.org/D13694
`node_exec` had some code that was specific to texture/shader nodes.
These functions arent used outside there module so limit there declarations.
Also make a function static that is only used in `node_exec.c`
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D13899
The `TreeElement.rnaptr` was only needed for RNA tree-elements. Now it
can be gotten through the new type specific classes, e.g.
`TreeElementRNAProperty.getPointerRNA()`.
Plan is to remove things like `TreeElement.directdata` and to instead
expose specific queries in the new type specific tree-element classes.
e.g. like here: `TreeElementSequence.getSequence()`
For now uses `tree_element_cast<>()` to get the new type specific
tree-element, later these should replace `TreeElement` all together.
Add function to safely request the type-specific C++ element from a
C-style `TreeElement`. Looks like this:
```
TreeElementFoo *te_foo = tree_element_cast<TreeElementFoo>(te);
```
The "cast" will return null if the tree-element doesn't match the
requested type.
This is useful for the transition from the C-style type to the new ones.
This uses a light parser / string modification pass to convert
C++ enum declaration syntax to GLSL compatible one.
GLSL having no support for enums, we are forced to convert the
enum values to a series of constant uints.
The parser (not really one by the way), being stupidly simple,
will not change anything to the values and thus make some C++
syntax (like omitting the values) not work.
The string replacement happens on all GLSL files on startup.
I did not measure significant changes in blender startup speed.
There is plans to do all of this at compile time.
We limit the scope of the search to `.h` and `.hh` files to prevent
confusing syntax in `.glsl` files.
There is basic error reporting with file, line and char logging
for easy debuggabiliy.
The requirements to use this enum sharing system are already listed in
`gpu_shader_shared_utils.h` and repeated on top of the preprocessor
function.
Remove small ray offsets that were used to avoid self intersection, and leave
that to the newly added primitive object/prim comparison. These changes together
significantly reduce artifacts on small, large or far away objects.
The balance here is that overlapping primitives are not handled well and should
be avoided (though this was already an issue). The upside is that this is
something a user has control over, whereas the other artifacts had no good
manual solution in many cases.
There is a known issue where the Blender particle system generates overlapping
objects and in turn leads to render differences between CPU and GPU. This will
be addressed separately.
Differential Revision: https://developer.blender.org/D12954
Caused by 0f89bcdbeb where it was needed for cage and evaluated mesh
to have same behavior in respect of having edit_mesh pointer assigned.
This change makes it so that edit_data is not implied to exist when the
edit_mesh pointer is not null. This was already the case in some other
code.
Those cases are almost always synptoms of either bug in code, or broken
files. Re-doin resync on them only costs time and causes extra trash
data as a result, without really helping in any way.
Both new normals (from rBb7fe27314b25) and vpaint (from rBf7bbc7cdbb6c)
RNA arrays were missing the `PROPOVERRIDE_IGNORE`. Those huge blobs of
geometry data should never be processed by liboverride code.
This enables support for node group assets. Previously, node group
assets only worked when the "extended asset browser" experimental
features is enabled.
Differential Revision: https://developer.blender.org/D13748
For node groups there is no good default preview generation.
Nevertheless, t would be useful to generate a preview image for a
node group by rendering an object in some cases.
This commit adds a new operator that allows updating the preview
image for the active asset by rendering the active object.
Note, the operator can also be used for other asset types, not just
node groups.
The operator can be found in a menu right below the refresh-preview
button. Currently it is the only operator in that menu. In the future,
more operators to create previews may be added.
Differential Revision: https://developer.blender.org/D13747
The VSE and node editor only uses an overlay buffer to draw to the screen. The
GPUViewport assumes that platforms clears all textures during creation, but
they do not on selected platforms. What would lead to drawing from
uncleared memory.
This patch fixes this by clearing all viewport textures during creation.
Also adds a few things to GPUShader for easily create shaders.
Heavy usage of macros to compose the createInfo and avoid
duplications and copy paste bugs.
This makes the link between the shader request functions
(in workbench_shader.cc) and the actual createInfo a bit
obscure since the names are composed and not searchable.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D13910
Continuation of work started in 2e221de4ce and 249e4df110.
Adds new tree-element classes for RNA structs, properties and array
elements. This isn't exactly a copy and paste, even though logic should
effectively be the same. Further cleanups are included to share code in
a nice way, improve code with simple C++ features, etc.
2022-01-26 11:44:58 +01:00
8261 changed files with 308660 additions and 255540 deletions
option(WITH_CYCLES_DEBUG_NAN"Build Cycles with additional asserts for detecting NaNs and invalid values"OFF)
option(WITH_CYCLES_NATIVE_ONLY"Build Cycles with native kernel only (which fits current CPU, use for development only)"OFF)
option(WITH_CYCLES_KERNEL_ASAN"Build Cycles kernels with address sanitizer when WITH_COMPILER_ASAN is on, even if it's very slow"OFF)
@@ -453,14 +445,9 @@ endif()
# AMD HIP
if(NOTAPPLE)
if(WIN32)
option(WITH_CYCLES_DEVICE_HIP"Enable Cycles AMD HIP support"ON)
else()
option(WITH_CYCLES_DEVICE_HIP"Enable Cycles AMD HIP support"OFF)
endif()
option(WITH_CYCLES_DEVICE_HIP"Enable Cycles AMD HIP support"ON)
option(WITH_CYCLES_HIP_BINARIES"Build Cycles AMD HIP binaries"OFF)
set(CYCLES_HIP_BINARIES_ARCHgfx1010gfx1011gfx1012gfx1030gfx1031gfx1032gfx1034CACHESTRING"AMD HIP architectures to build binaries for")
set(CYCLES_HIP_BINARIES_ARCHgfx900gfx906gfx90cgfx902 gfx1010gfx1011gfx1012gfx1030gfx1031gfx1032gfx1034gfx1035CACHESTRING"AMD HIP architectures to build binaries for")
mark_as_advanced(WITH_CYCLES_DEVICE_HIP)
mark_as_advanced(CYCLES_HIP_BINARIES_ARCH)
endif()
@@ -470,6 +457,21 @@ if(APPLE)
option(WITH_CYCLES_DEVICE_METAL"Enable Cycles Apple Metal compute support"ON)
option(WITH_CYCLES_ONEAPI_BINARIES"Enable Ahead-Of-Time compilation for Cycles oneAPI device"OFF)
option(WITH_CYCLES_ONEAPI_SYCL_HOST_ENABLED"Enable use of SYCL host (CPU) device execution by oneAPI implementation. This option is for debugging purposes and impacts GPU execution."OFF)
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# ***** END GPL LICENSE BLOCK *****
# SPDX-License-Identifier: GPL-2.0-or-later
set(ZSTD_EXTRA_ARGS
-DZSTD_BUILD_PROGRAMS=OFF
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
