Initial defaults for userdef->fontdir for Mac and Linux.
See D12802 for more details.
Differential Revision: https://developer.blender.org/D12802
Reviewed by Campbell Barton
This node doesn't only support point clouds, it supports any geometry
component type with points, so meshes, curves, and point clouds.
We could explicitly list them to add a warning for volumes, but
that wouldn't really have any practical benefit, and isn't done
elsewhere.
The name and tooltip were talking about file-lists, which exposes the
fact that the Asset Browser uses the File Browser code in the UI, which
we shouldn't do. This can confuse users.
Instead have a dedicated operator for the Asset Browser with a proper
name and tooltip.
As part of the refactor to the node declaration builders, we had hoped
to add a regular expression specifically for these socket names, but
recent discussions have revealed that using the translation marker
macros is the preferred solution.
If the names and descriptions were exposed to RNA, these would not
be necessary. However, that may be quite complicated, since sockets
are all instances of the same RNA types.
Differential Revision: https://developer.blender.org/D13033
The asset catalog filtering data needs to be cleared when with the other
asset library data of the file list. This is done when changing between
asset and file browser (and in other cases).
Those were used in a very few places to detect whether iteration should
be stopped or not, but one can use `BKE_lib_query_foreachid_iter_stop`
now for that.
Also fix early break handling in embedded IDs processing.
Fix T90922: Fix return policy inconsistency in `scene_foreach_id`.
In case `library_foreach_ID_link` would return early in recursive
process, it would not properly free its utils data.
Also add proper iteration break in case some sub-calls requested it.
Finally, make this function return a boolean to know whether iteration
should be stopped or not (will be used in future commit to fix this
handling in embedded IDs case).
Part of T90922: Fix return policy inconsistency in `scene_foreach_id`.
The new `BKE_LIB_FOREACHID_PROCESS_FUNCTION_CALL` execute the given
statement and then check status of `LibraryForeachIDData` data, and
return in case stop of iteration is requested.
This is very similar to the other `BKE_LIB_FOREACHID_PROCESS_` existing
macros, and allows us to properly break iteration when a sub-function
has requested it.
Part of T90922: Fix return policy inconsistency in `scene_foreach_id`.
Add a function to check if iteration over ID usages should stop (using
internal `IDWALK_STOP` status flag).
Use it in `BKE_LIB_FOREACHID_PROCESS_` macros, and in
`window_manager_foreach_id` to handle properly the active workspace case
(previous code could skip the call to `BKE_workspace_active_set` in case
iteration over ID usages was stopped by callback on that specific ID
usage).
Part of T90922: Fix return policy inconsistency in `scene_foreach_id`.
Calling `remove_unused_references` inside the `modify_geometry_sets` loop
was known to be not entirely reliable before. Now I just moved it out of
the loop which fixes the bug.
Looks like OSX changed the default format of its locale, which is not
valid anymore for gettext/boost::locale.
Solution based on investigations and patch by Kieun Mun (@kieuns), with
some further tweaks by Ankit Meel (@ankitm), many thanks.
Also add an exception catcher on `std::runtime_error` in
`bl_locale_set()`, since in OSX catching the ancestor `std::exception`
does not work with `boost::locale::conv::conversion_error` and the like
for some reasons.
Reviewed By: #platform_macos, brecht
Maniphest Tasks: T88877
Differential Revision: https://developer.blender.org/D13019
This fixes one (of possibly multiple) root issues. The collection passed into
the Collection Info node must not contain the current object, because that
would result in a dependency cycle and recursive instancing.
This is a better and more general fix for T92511 and T92508 than
the ones that I committed before.
Previously, we tagged caches dirty when first accessing attributes.
This led to incorrect caches when under some circumstances. Now
cache invalidation is part of `OutputAttribute.save()`.
A nice side benefit of this change is that it may make things more
efficient in some cases, because we don't invalidate caches when
they don't have to be invalidated.
Differential Revision: https://developer.blender.org/D13009
In this case, the uniform index sampling loop would fail to assign any
data to the samples, so fill the rest with the largest value possible,
corresponding to the end of the spline. Animation Nodes has the same
fix for this case.
This patch makes `widget_nodesocket` base the size of the drawn
socket icon on the rectangle that’s passed in to allow it to scale
with the rest of the interface.
Differential Revision: https://developer.blender.org/D11734
When doing a non portable build of blender, the executable
blender-thumbnailer would be installed in two locations:
/usr/bin/
/usr/
While cleaning up, also make the blender thumbnailer dll optional on
windows to bring the logic in line with what it is on linux and mac.
Reviewed By: Campbell Barton, Ray molenkamp
Differential Revision: http://developer.blender.org/D13014
When use Invert option, the weight must be inverted not omitted. This change invert the value if the point had assigned weight to get the right result.
Remapping code could call collection resync code while processing
remapping, which is a good way to crash by accessing no-more-valid
pointers.
Similar issue as with liboverrides resync, fixed the same way by
preventing any collection resync until whole remapping has been done.
This was probably not an issue in practice in current code, since this
is only used by append code currently, which should not affect
layers/collections in current scene yet.
`CTX_data_selected_objects()` returns a `ListBase` of
`CollectionPointerLink`, not `PointerRNA`. This caused an alignment
issue, resulting in `owner_id == NULL` reported in T92507. Correcting
the pointer type fixed this.
In the end, the same pointer is used as before this commit, but the way
it is obtained is actually correct.
When a new key is added to the context, it also needs to be added to the
`sphinx_doc_gen.py` file for generating the Python API documentation.
When this isn't done, the script would raise a generic `KeyError`. Now
it explains what needs to be updated to solve the problem.
No functional changes to Blender.
Before this, the search button was quite small really, not much text would fit
into it. Increase the size a bit, but not too much to still make the layout
work in smaller area sizes.
Before this, the search button was quite small really, not much text would fit
into it. Increase the size a bit, but not too much to still make the layout
work in smaller area sizes.
There was a bunch of special handling to support dropping data-blocks onto
string or search-menu buttons, to change the value of these. This refactor
makes that case use the normal drop-box design, where an operator is executed
on drop that gets input properties set by the drop-box. This should also make
it easier to add support for dragging assets into these buttons.
In addition this fixes an issue: Two tooltips were shown when dragging assets
over text buttons. None should be shown, because this isn't supported.
{F11548100, size=full}
To celebrate the beginning of a new series, it feels like the right time to
give the theme a fresh look while improving on what already works.
The aim of this refresh is to keep a familiar look but with polishing touches
here and there. Like new paint on the walls of your well known house.
The theme for Blender 2.8 was well received but presented a few flaws.
* Transparency on menus and tooltips reduce readability
* Mismatch on certain colors, especially outlines of connected widgets
* Active/open menus highlight was not prominent enough
* Header background mismatch in some editors
At the same time we can make use of new features in 3.0:
* Make panels look like panels again (like in v2.3!)
* Make use of roundness in more widgets
* Since nodes are no longer hard-coded to be transparent, tweak opacity and saturation
* Tweak colors for the new dot grid
This update does not include:
* Meshes in edit mode to match greenish object-data color. This needs tweaks in the code to improve contrast.
* A copy of the Blender 2.8x legacy theme. This could be added to the community themes (shouldn't cost much maintenance, I hope)
There will be certainly small tweaks to do here and there, I've been working using this theme
for months but there can be areas that are missing update. The overall style is presented here.
This commit bumps the file subversion.
Reviewed By: #user_interface, Severin
Differential Revision: https://developer.blender.org/D13008
Adding a catalog should also activate it, like we do it for adding other
data in Blender. The tree-view code will make sure the newly added item
will not have collapsed parents.
This reverts commit 487faed6d0.
I changed my mind on how to implement this feature. Adding a catalog
should also activate it, like we do it for adding other data in Blender.
The activation will automatically make it visible then. See the
following commit.
When pressing the '+' icon to add a new child catalog, or when adding it
through the context menu, the new catalog should be visible. So the
this change makes sure the parent is uncollapsed if needed.
The current UI for the Scramble Distance patch is grayed out
depending on different settings that are enabled. However it
didn't make much sense to me so I have updated when the UI is
grayed out to hopefully make more sense to the end user.
Differential Revision: https://developer.blender.org/D12963
This is meant to add something to the sub-panel when it is empty
so it looks more purposeful, but also add a hint that might be helpful
when figuring out how to output a named attribute.
Differential Revision: https://developer.blender.org/D12715
The text is just too long, it doesn't fit in the node width,
and the tooltips display the property names well enough,
since they aren't used as often as other settings.
Also display the text in lite builds too, there is no reason not to.
That makes the node more useful by default.
One use case is to delete some points after the Set ID node, then instance
with some randomness. Now when deleting different points, the
randomness will remain stable.
Subdivision surface: Both geometry sockets renamed to "Mesh"
Points to Volume: Use "Points" and "Volume" names
Distribute Points on Faces: Use "Mesh" input name
These are meant to provide a hint to users which type each
node is meant to use.
- Only cycle items when the cursor hasn't moved.
This matches object-mode behavior, making it possible to tweak-drag
the current selection without first cycling to the next sequence strip.
Successive clicks will still cycle sequence strips.
- For center selection, use a penalty for the active strip.
- Use a temporary selection list to avoid moving the sequence
strips out of the scene during selection
(changing their order when added back).
Replace local static mouse coordinate storage with a single function.
also resolve inconsistencies.
- Edit-mesh selection used equality check (ignoring `U.move_threshold`).
- Motion to clear tooltips checked the value without scaling by the DPI.
Also prevent the unlikely case of the previous motion check matching
a different area by resetting the value when the active region changes.
Uses the additions to the UI tree-view API from the previous commit to
enable drag & drop of asset catalogs. The catalogs will be moved in the
tree including children.
A remaining issue is that a catalog with children will always be
collapsed when dropping. I need to find a way to fix that in the
tree-view API.
There are a few improvements I can think of for the tree-item drag &
drop support, but time for these is too short. These can be done as
normal cleanups at some point.
Adds the needed bits to the UI tree-view API to support dragging
tree-view items. This isn't used yet, but will be in the following
commit for asset catalogs.
There will probably be some further tweaks to the design at some point,
for now this should work well enough for our use-cases.
Mantaflow could steal tasks from dependency graph, which under
certain conditions causes a recursive lock involving GIL.
Isolate threading done in mantaflow when it is interfaced form
the dependency graph.
Isolation done from the modifier, since the deeper calls are
branching out quite quickly.
Differential Revision: https://developer.blender.org/D13011
Adds scrambling distance to the PMJ sampler. This is based
on the work by Mathieu Menuet in D12318 who created the original
implementation for the Sobol sampler.
Reviewed By: brecht
Maniphest Tasks: T92181
Differential Revision: https://developer.blender.org/D12854
saturate is depricated in favour of __saturatef this replaces saturate
with __saturatef on CUDA by createing a saturatef function which replaces
all instances of saturate and are hooked up to the correct function on all
platforms.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D13010
The label was placed right at the left border of the row highlight,
which looked weird. So add some padding to tree-row labels without icon
or collapse chevron, which makes it look more polished. As additional
benefit, it alignes the labels better with icons of other rows on the
same tree level. And the padding makes it more clear that a child is
indeed a child, not just a sibling without icon.
Unlike translating existing nodes [which disables cursor wrapping and
enables edge-panning instead since rBSa1cc7042a74], adding new nodes
would still show the old behavior of cursor wrapping.
This has been disabled for the case when the node whould be added
outside (due to menus overlapping other editors).
Now enable edge-panning for adding new nodes as well and make sure
this only starts once the mouse has returned into the inside rect once.
Maniphest Tasks: T92427
Differential Revision: https://developer.blender.org/D13005
This seems wrong and was especially noticeable since transform snapping
does account for it (which was reported in T92494).
Now divide the `DotGridLevelInfo` `step_factor` by the default of 20 for
`U.widget_unit` and scale it later by the actual interface scale.
note: when zooming, this will still always snap to the smallest dot
level (not sure, with a bit more work it could be possible to only snap
to the lowest visible level after fading?)
Maniphest Tasks: T92494
Differential Revision: https://developer.blender.org/D13002
Properties Editor
Similar to rBf9308a585ecd, use `psys_get_current` if we cant get the
active psys from context (which is only defined for the Properties
Editor). Other solution would be to define a "particle_system" context
member in other editors, but for now, stick with the simplest solution.
thx @mano-wii for additional input
Maniphest Tasks: T92402
Differential Revision: https://developer.blender.org/D13000
Lattice wires are drawn as part of "Extras". Unlike the other types
details (Cameras, Lights, Lightprobes and Speakers), Lattices actually
have boundingboxes defined, so hide the lattice wires if only the
boundingbox is requested.
Maniphest Tasks: T88443
Differential Revision: https://developer.blender.org/D11343
Avoid using underscore prefix since these typically mean the variable
shouldn't be accessed directly (it may be accessed from a macro,
or memory on the stack which is assigned to a pointer).
In this case a more meaningful name can be used for the argument
that was shadowed.
SVN seems to die randomly *a lot* during
large updates for some users, and I'm no
closer to finding out why that keeps happening.
"The internet" seems to imply some AV vendors
may be at fault here but nothing conclusive.
The solution however is repeatedly running
`svn cleanup`and `svn update` in the library
folder to repair the corruption and finish the
update.
This change adds a small convenience helper
to automate the repair.
This is done inside the make.bat code rather
than the shared python based update code, since
python lives in the library folder and may
or may not exist when this corruption occurs.
The paddings and margins were more than needed, this reduces them a bit. That
way space is used more efficiently, the small differences add up so that more
items fit into a row.
The File Browser should not be affected.
Before/after comparisons:
{F11529986} {F11529988}
{F11529987} {F11529989}
This reverts commit 03013d19d1.
This commit broke the windows build pretty badly and I don't
feel confident landing the fix for this without review.
Will post a possible fix in D12969 and we'll take it from there.
These nodes allow accessing and changing the stable/random ID used
for motion blur with instances and stable randomness.
Since rB40c3b8836b7a, the stable ID is a built-in attribute, so to be
consistent and allow changing it in the node tree like other built-in
attributes, it has get and set nodes.
Knife angle measurements were mis-aligned if a cut point was in space.
Specifically, the arc drawing would not match with the cut line.
Fixed by removing a correction for kcd->prev.cage.
This correction was originally added for panning with measurements to work.
In hindsight it is not needed and only introduces issues like this.
We already show a message when showing an asset library whose path can't be
found on disk. The red text was making it look like some fatal error happened.
And the message could be a bit more useful generally.
So this removes the red color of the text, (arguably) improves the text and
adds a button as shortcut to open the Preferences with the asset library
settings.
Differential Revision: https://developer.blender.org/D12894
Renames the operator from "Show Preferences" to "Open Preferences...". "Open"
is more clear than "Show" (since they could be shown in-place). "..." is
usually used in Blender to indicate that a new Window or popup will be opened.
Note that vanilla Blender doesn't actually show this name anywhere, so this
change shouldn't be visible. That may change, see D12894.
Feedback was that "Default" is a bit of a weird name, so switching it to "User
Library". Added versioning code which won't be entirely bullet proof (e.g. will
also rename libraries named "Default" by the user), but it doesn't have to be.
Addresses T90298.
The call to `attribute_try_get_for_output` does some cache invalidation
internally. Under some circumstances the call to `position_evaluator.evaluate()`
recomputed the caches (e.g. when the Normal node was used, the evaluated
handle positions cache on curves were updated). After the positions have
been updated in the Set Position node, the cache was not invalidated again.,
leading to incorrect rendering.
The proper solution will be to do the cache invalidation in `OutputAttribute.save()`
again. That is a bit more involved though. For now just reorder the code a bit
to do the cache invalidation after the field has been computed.
There is a follow up task: T92509.
The location of a linked object isn't editable, or at least it will be reset
when reloading the file. So the drag & drop shouldn't even pretend like this
would work, so disable the snapping of the object and the bounding-box to show
the snapped object location while dragging.
When the Asset Browser import type was set to "Link", after dragging in an
object asset the object wouldn't actually appear in the viewport. Do the same
depsgraph tagging (and TODO comment) as the `OBJECT_OT_add_named` operator,
which does similar things.
This patch changes how nodes look visually, in an attempt to fix a number of issues:
* The header background is currently drawn using a theme color fully opaque, this limits the colors we can use because the node name/label is drawn on top.
* Hard-coded transparency makes nodes hard to read. The node backdrop already has alpha so if the user wants it they can set it. This patch uses alpha from the theme.
* Better muted status indicator, instead of simply making everything transparent and the wires inside red, draw a red outline around the node, darken the header and backdrop.
* On muted nodes, display wires behind the backdrop to not interfere with text/widgets inside the node.
Nodes:
* Darken header to improve readability of node label.
* Draw a line under the header
* Thicker outline.
* Do not hard-code transparency on nodes, use the theme's node backdrop alpha component.
* Use angle icon instead of triangle (to be consistent with the [[ https://developer.blender.org/D12814 | changes ]] to panels)
Style adjustment to sockets drawing:
* Do not hard-code the socket outline color to black, use `TH_WIRE` instead
* Do not use `TH_TEXT_HI` for selected sockets, use `TH_ACTIVE` (active node outline)
* Do not draw sockets background transparent on muted nodes.
* Thicker outline to help contrast and readability
{F11496707, size=full}
Reviewed By: #user_interface, HooglyBoogly
Differential Revision: https://developer.blender.org/D12884
Previously, every node had to create warnings for unsupported input
geometry manually. Now this is automated. Nodes just have to specify
the geometry types they support in the node declaration.
Differential Revision: https://developer.blender.org/D12899
Instance IDs serve no purpose for rendering when they aren't stable from
one frame to the next, and if the index is used in the end anyway, there
is no point in storing a vector of IDs and copying it around.
This commit exposes the `id` attribute on the instances component,
makes it optional-- only generated by default with the distribute points
on faces node.
Since the string to curves node only added the index as each instance's
ID, I removed it. This means that it would be necessary to add the ID
data manually if the initial index actually helps (when deleting only
certain characters, for example).
Differential Revision: https://developer.blender.org/D12980
Now that object assets are no longer considered experimental, the Assets
submenu can always be shown (regardless of the Extended Asset Browser
experimental feature).
The two blocking issues for object assets are addressed, see T92111 and T90198.
So now, objects can be marked as assets and be used in the Asset Browser.
`ED_fileselect_activate_by_id()` activates an asset (i.e. marks it as
the active asset in the asset browser). To avoid an "active but not
selected" state, it also selects it.
Before this commit, the function would also deselect all other assets,
but that's considered doing too much. If deselection is required, the
`ED_fileselect_deselect_all()` function can be called.
Manifest Task: T92152
In the 3D Viewport, add an "Assets" submenu to the Objects menu, for the
same operators as available in the outliner: Mark as Asset, Clear Asset,
Clear Asset (Set Fake User).
Since object assets are still considered experimental, the menu is only
shown when the Extended Asset Browser experimental feature is enabled.
There's now a message displayed in red next to the cursor explaining that only
assets from the current file can be moved between catalogs.
The previous commit prepared this.
A tree-view item's drop controller can now return a message for the user
explaining why dropping isn't possible with the dropped data. This is then
displayed in red text next to the cursor.
This isn't actually used yet, the follow up commit will do that.
Make it possible to run `ASSET_OT_mark` and `ASSET_OT_clear` operators from
the 3D Viewport. There is no menu entry, just compatibility with pressing
F3 and executing the operators from the operator search.
Refactor `view3d_context()` to use early `return`s instead of a bundle of
`if`/`else if`/`else`, some of which had `return`s and some not.
No functional changes.
`view3d_context()` would return `-1` ("found but not available") when
fetching the context dir. This is incorrect; it should return 1 ("ok").
This is a semantic change in preparation of further cleanup of the code.
This adds generic attribute rendering support for meshes for Eevee and
Workbench. Each attribute is stored inside of the `MeshBufferList` as a
separate VBO, with a maximum of `GPU_MAX_ATTR` VBOs for consistency with
the GPU shader compilation code.
Since `DRW_MeshCDMask` is not general enough, attribute requests are
stored in new `DRW_AttributeRequest` structures inside of a convenient
`DRW_MeshAttributes` structure. The latter is used in a similar manner
as `DRW_MeshCDMask`, with the `MeshBatchCache` keeping track of needed,
used, and used-over-time attributes. Again, `GPU_MAX_ATTR` is used in
`DRW_MeshAttributes` to prevent too many attributes being used.
To ensure thread-safety when updating the used attributes list, a mutex
is added to the Mesh runtime. This mutex will also be used in the future
for other things when other part of the rendre pre-processing are multi-threaded.
`GPU_BATCH_VBO_MAX_LEN` was increased to 16 in order to accommodate for
this design.
Since `CD_PROP_COLOR` are a valid attribute type, sculpt vertex colors
are now handled using this system to avoid to complicate things. In the
future regular vertex colors will also use this. From this change, bit
operations for DRW_MeshCDMask are now using uint32_t (to match the
representation now used by the compiler).
Due to the difference in behavior for implicit type conversion for scalar types
between OpenGL and what users expect (a scalar `s` is converted to
`vec4(s, 0, 0, 1)` by OpenGL, vs. `vec4(s, s, s, 1)` in Blender's various node graphs) ,
all scalar types are using a float3 internally for now, which increases memory usage.
This will be resolved during or after the EEVEE rewrite as properly handling
this involves much deeper changes.
Ref T85075
Reviewed By: fclem
Maniphest Tasks: T85075
Differential Revision: https://developer.blender.org/D12969
In future use cases, a volume can contain many grids that represent the
density information. In this case, it's better if the volume to mesh node
creates a mesh based on all of the grids in the volume.
This is also a benefit to share-ability, since one doesn't have to
specify the grid name in the node. Instead, in the future we can have
a way to split particular grids into separate volumes, if only one
grid should be considered.
The code changes are relatively simple:
- Move the old volume to mesh node to the legacy folder.
- Run the volume to mesh node on all instance geometry, like elsewhere.
- Make the blenkernel's volume to mesh API a bit more specific.
Differential Revision: https://developer.blender.org/D12997
When dragging an object in non-object mode into a 3D View, there will now be
red text explaining that this is only possible in object mode.
The previous commit enabled this.
* Allow operators to show a "disabled hint" in red text explaining why dropping
at the current location and in current context doesn't work. Should greatly
help users to understand what's the problem.
* Show a "stop" cursor when dropping isn't possible, like it's common on OSes.
Differential Revision: https://developer.blender.org/D10358
This option allows the edge to end right at the border
instead of extending beyond.
Useful when having multiple camera setup where you
want the border to be clean.
Also moved overscan option down inside "Composition" sub panel
so it makes more sense.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12126
This patch upgrades node editor breadcrumbs to have slightly more
visual weight, to including the base path of object/modifier/world,
etc, have more visually pleasing spacing, and contain icons.
In the code, a generic "context path" is added to interface code.
The idea is that this could be used to draw other breadcrumbs in areas
like the property editor or the spreadsheet, and features could be added
to all of those areas at the same time.
Ideally we would be able to control the color of the breadcrumbs with a
specific theme color, but since they are drawn with the regular layout
system, that is not easily possible.
Thanks to @fabian_schempp for the original patch.
Differential Revision: https://developer.blender.org/D10413
Allows line art camera to be different from scene active camera,
useful when baking multiple shots in different angle as
well as for motion graphics effect.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12047
Allows the user to turn off in_front option for grease pencil object
and offset strokes towards camera to allow depth interaction of the
rest of the scene.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12046
Cycles:Distance Scrambling for Cycles Sobol Sampler
This option implements micro jittering an is based on the INRIA
research paper [[ https://hal.inria.fr/hal-01325702/document | on micro jittering ]]
and work by Lukas Stockner for implementing the scrambling distance.
It works by controlling the correlation between pixels by either using
a user supplied value or an adaptive algorithm to limit the maximum
deviation of the sample values between pixels.
This is a follow up of https://developer.blender.org/D12316
The PMJ version can be found here: https://developer.blender.org/D12511
Reviewed By: leesonw
Differential Revision: https://developer.blender.org/D12318
Node links that are connected to selected nodes are highlighted
using the Wire Select theme color. Now it is possible to change the
transparency of this color to allow the actual link color to be visible
through the highlight (or to turn of the highlight entirely).
Differential Revision: https://developer.blender.org/D12973
Remove prefix of filenames that is the same as the folder name. This used
to help when #includes were using individual files, but now they are always
relative to the cycles root directory and so the prefixes are redundant.
For patches and branches, git merge and rebase should be able to detect the
renames and move over code to the right file.
* Split render/ into scene/ and session/. The scene/ folder now contains the
scene and its nodes. The session/ folder contains the render session and
associated data structures like drivers and render buffers.
* Move top level kernel headers into new folders kernel/camera/, kernel/film/,
kernel/light/, kernel/sample/, kernel/util/
* Move integrator related kernel headers into kernel/integrator/
* Move OSL shaders from kernel/shaders/ to kernel/osl/shaders/
For patches and branches, git merge and rebase should be able to detect the
renames and move over code to the right file.
Currently, both inactive and active tabs are using the `Region Text` theme property.
This patch makes it so active tabs use `Region Text Highlight`.
Since this check is done in other places already but was simply missing in this case, I believe this was just an oversight and not a design decision.
Top is master, bottom is this patch:
{F11520838, size=full}
This allows this kind of tab highlight, not possible before since all tabs would have white text.
{F11520873, size=full}
Reviewed By: #user_interface, Severin
Differential Revision: https://developer.blender.org/D13003
Add a Fast GI Method, either Replace for the existing behavior, or Add
to add ambient occlusion like the old world settings.
This replaces the old Ambient Occlusion settings in the world properties.
This is still useful in some cases even if not used by OpenImageDenoise. In
the future this may be replaced with a more generic system to control render
passes and filtering, but for now this just does what it did before.
Adds an abstraction layer to switch between serialization formats.
Currently only supports JSON. The abstraction layer supports
`String`, `Int`, `Array`, `Null`, `Boolean`, `Float` and `Object`. This
feature is only CPP complaint.
To write from a stream, the structure can be built by creating a value
(any subclass of `blender::io::serialize::Value` can do, and pass it to
the `serialize` method of a `blender::io::serialize::Formatter`. The
formatter is abstract and there is one implementation for JSON
(`JsonFormatter`).
To read from a stream use the `deserialize` method of the formatter.
{D12693} uses this abstraction layer to read/write asset indexes.
Reviewed By: Severin, sybren
Maniphest Tasks: T91430
Differential Revision: https://developer.blender.org/D12544
Previously, the field on every socket was logged for later use. This had
two main negative consequences:
* Increased memory usage, because the fields may contain a lot of data
under some circumstances (e.g. a Ray Cast field contains the target geometry).
* Decreased performance, because anonymous attributes could not be
removed from geometry automatically, because there were still fields that
referenced them.
Now most fields are not logged anymore. Only those that are viewed by a
spreadsheet and constant fields. The required inputs of a field are still
logged in string form to keep socket inspection working.
Avoid blocking the UI when searching for animation channels with Ctrl+F.
Instead of showing a single text input in a blocking popup, Ctrl+F now
just focuses the search box above the channel list. It feels nicer to
use and has the niceties that come from using that textbox, like
searching per keystroke, compared to the old pop-up method.
As the behaviour of the operator has changed considerably, this also
changes the operator name from `anim.channels_find` to
`anim.channels_select_filter` and updates the keymaps.
Reviewed By: ChrisLend, sybren
Differential Revision: https://developer.blender.org/D12146
Our CMake setup refuses to run from the source directory (i.e. Blender does
not support in-source builds). Instead, it shows instructions on how to
clean up after an accidental `cmake` invocation. These instructions missed
one directory that should also be removed (`CMakeFiles`), so that's been
added to the message now.
No functional changes to Blender or the build.
The viewer node has been expanded to have a field input next to the
geometry input. When both are connected (by ctrl+shift clicking on a node)
the spreadsheet will show the evaluated field on the geometry.
The operator to link to the viewer has become a bit smarter. It automatically
detects if it should link to the geometry or field input. In the future some more
smartness could be added, such as automatically relinking the "right" geometry
when viewing a field.
Internally, there are two major changes:
* Refactor of what happens when ctrl+shift clicking on a node to link to
a viewer. The behavior of the geometry nodes viewer is a bit more complex
than that of the compositor viewers. The behavior in compositing nodes
should not have changed. Any change should be reported as a bug (and then
we can decide if it's worse than before or if it needs fixing).
* Evaluation, display and caching of fields in the spreadsheet editor.
Differential Revision: https://developer.blender.org/D12938
This adjusts some calculations and visibility flags for XR viewports in
order to account for a possible scale factor in the XR view matrix.
This scale factor can be introduced via the XR session settings base
scale, which allows a viewer to begin their session at a specific
reference scale, or the XR session state navigation scale, which allows
a viewer to adjust their scale relative to the reference scale during
the session.
Reviewed by Severin as part of D11501, but requested to be committed
separately.
Adds navigation transforms (pose, scale) to the XR session state that
will be applied to the viewer/controller poses. By manipulating these
values, a viewer can move through the VR viewport without the need to
physically walk through it.
Add-ons can access these transforms via Python
(XrSessionState.navigation_location/rotation/scale) to use with custom
operators.
Also adds 3 new VR navigation operators that will be exposed to users
as default actions in the VR Scene Inspection add-on. While all three
of these operators have custom properties that can greatly influence
their behaviors, for now these properties will not be accessible by
users from the UI. However, other add-ons can still set these custom
properties if they desire.
1). Raycast-based teleport
Moves the user to a location pointed at on a mesh object. The result
can optionally be constrained to specific axes, for example to achieve
"elevation snapping" behavior by constraining to the Z-axis. In
addition, one can specify an interpolation factor and offset.
Credit to KISKA for the elevation snapping concept.
2). "Grab" navigation
Moves the user through the viewport by pressing inputs on one or two
held controllers and applying deltas to the navigation matrix based on
the displacement of these controllers. When inputs on both controllers
are pressed at the same time (bimanual interaction), the user can scale
themselves relative to the scene based on the distance between the
controllers.
Also supports locks for location, rotation, and scale.
3). Fly navigation
Navigates the viewport by pressing a button and moving/turning relative to
navigation space or the VR viewer or controller. Via the operator's
properties, one can select from a variety of these modes as well as
specify the min/max speed and whether to lock elevation.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D11501
This patch makes the background grid of the node editor a grid of dots
instead of lines. This makes the background look a bit more subtle and
reduces visual complexity. The dots are meant to provide a reference
when panning and zooming. Based on the design of @pablovazquez, and
a patch originally authored by @fabian_schempp.
The "Grid Levels" controls how many levels of dots are drawn. As the
editor zooms in, the higher levels of dots fade in, making them closer
together visually. The zoom factor at which each grid starts and ends
fading in is controllable in the code, and could be tweaked further
in the future. The new default value is 7, out of a range from 0 to 9.
Differential Revision: https://developer.blender.org/D10345
The also moves all the image operators into one menu.
The goal here is to expose the operators in the UI so they
work with the operator search and to make the UI consistent.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D12808
This patch improves performance by only assigning
or calculating data for connected sockets.
It is recommended that artists use the lowest dimensions setting
for noise based textures. E.g. Use 2D instead of 3D where possible.
Using a scoped timer and single thread on 256,000 points.
Smooth F1 3D : Debug build
Timer 'Optimised' took 9.39991 s
Timer 'Normal' took 16.1531 s
This optimisation is only for GN and not shaders.
Differential Revision: https://developer.blender.org/D12985
Also use consistent UI names for properties that are similar between
that node and the points to volume node (which happen to be shorter,
allowing the node to be narrower).
The search bar in the asset browser now also matches on asset tags.
- Matching is done on entire tags, so searching for "redder" will not
show assets tagged with "red".
- All assets are shown that have at least one matching tag. So searching
for "red green" will show all assets with either "red" or "green" tags
(or both, of course).
- Searching is case-insensitive.
- Only assets from the active catalog are shown; if all assets should be
searched through, users can select the "All" catalog.
Manifest Task: T82679
This patch makes the layout of the custom property panel more coherent
with the rest of the property editor interface, makes it less busy,
allows more space for the buttons for the actual properties, and
simplifies editing values of unsupported property types or long arrays.
- Remove the box around each property.
- Use an non-embossed X icon for deleting.
- Use an "edit" icon instead of the text for the meta-data edit operator.
The "gear" icon used for editing isn't ideal here.
- Increase the max array length for drawing the values directly to 8.
- Add an "Edit Property Value" operator for dictionaries or longer arrays.
- Replace the "Library Override" text with an icon.
- Use a proper split factor, the same as the rest of the UI.
Differential Revision: https://developer.blender.org/D12805
The drag and drop feature of objects in 3D View has been modified to include:
- Snap the object being dragged.
- Visual feedback through a box and the placement tool grid.
Maniphest Tasks: T90198
Differential Revision: https://developer.blender.org/D12912
No functional changes.
This commit adds 3 callbacks for `wmDropBox` which allow custom drawing
without affecting the internal dropbox API.
Differential Revision: https://developer.blender.org/D12948
Perform a few cleanups:
- Add documentation to explain what returned bools mean.
- Early returns so that flow is clearer and some checks on `is_filtered`
are no longer necessary.
- Split up `is_filtered_file` and `is_filtered_id_file`, so that they can
reuse common code, and such that the different filter checks they
perform can be separated from each other.
The latter is done not only to reduce code duplication, but also as
preparation to fix the asset browser filtering. For that, it helps when
the "filter by file name" and "filter by file type" parts are separate.
No functional changes.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D12991
The NLA editor is in need of a design overhaul, hopefully for 3.1 or 3.2.
This should be a project on itself, however, the worst offender currently is the use of
gradients on strips. Something that can be fixed easily.
{F11390293, size=full, loop, autoplay}
A simple replace of `UI_draw_roundbox_shade_x` for `UI_draw_roundbox_4fv` brings strips
in line with how other areas are drawn.
This patch also:
* Remove embossed lines around active action channel.
* Highlight the strip while being moved.
This patch does not include any theme changes. This will be tackled separately.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D12968
This adds an option to fill the ends of the generated mesh for
each spline combination with an N-gon. The resulting mesh is
manifold, so it can be used for operations like Boolean.
Differential Revision: https://developer.blender.org/D12982
While c7d94a7827 exposed this bug,
this was caused by text widths being calculated without taking the zoom
level into account since drawing at a smaller size is often wider than
the width of the larger text scaled by the zoom.
Issue is that the Instance on Points node currently expects that all
instance references are used (see `remove_unused_references`).
This should be fixed at some point, but for now make sure that
the String to Curves node does not output unused references.
Add calls to `BKE_callback_global_init()` and `BKE_callback_global_finalize()`
to ensure unit tests mimick Blender (and don't trip the assertions added
in rBbeea601e7253).
No functional changes to Blender.
Object types like empties, cameras or lamps will just end up as empty preview
images. We can think about ways to visualize them still, but meanwhile, don't
create such an empty preview.
Differential Revision: https://developer.blender.org/D10334
Reviewed by: Bastien Montagne, Sybren Stüvel
While c7d94a7827 exposed this bug,
this was caused by a discrepancy in padding where labels would
have additional padding when drawing without emboss.
The padding made widget drawing behave as if the text took up more
room causing it to be clipped.
Now labels are considered the same width with/without emboss.
This adds a new image texture node for geometry nodes. It does not
reuse the same node that is used in shading, because we want to be
able to expose the image and frame as sockets.
There is a known update issue when a movie or image sequence is
used. That will be fixed separately (also see D12957).
Currently, the image socket is just a pointer to an Image ID data block.
This can contain single images but also movies and image sequences.
In the future, the definition of an image socket can be expanded to
include images that are generated from scratch in the node tree.
For more details read the discussion in D12827.
Some of the code is a direct port from cycles and should be cleaned
up a bit in the future. For example `image_cubic_texture_lookup`.
For still images, the frame input is ignored. Otherwise, the frame
has to be in a valid range for the node to work. In the future we
may add e.g. automatic looping functionality.
Differential Revision: https://developer.blender.org/D12827
Oversight in {rBb0741e1dcbc5}.
This was guarded by an assert in `get_target_element`, but it can be
valid to have these assigned to a shortcut (and then perform the action
without an active outliner element).
Now remove the assert and let the operator polls check if we really have
a target element.
note: this basically makes `get_target_element` obsolete, could call
`outliner_find_element_with_flag` instead in all cases.
Maniphest Tasks: T91411
Differential Revision: https://developer.blender.org/D12495
Asset Catalog Paths should only contain forward slashes as separators, but
now the UI is more resilient to people using blackslashes instead.
Manifest Task: T90553
Put related lines in a block of their own, such that each block doesn't
have access to the variables of the previous blocks.
This makes it easier to correctly copy-paste some tests, as the compiler
forces you to update the code afterwards.
Panning in camera view makes the border to be modified, which was causing
the Cycles display to believe the rendered result is unusable.
The solution is to draw the render result at the display parameters it was
updated for. This allows to avoid flickering during panning, zooming, and
camera FOV changes. The suboptimal aspect of this is that it has some jelly
effect, although it is on the same level as jelly effect of object outline
so it is not terrible.
Differential Revision: https://developer.blender.org/D12970
Add static boolean to track whether the callbacks system has been
initialised. This makes it possible to make the `BKE_callback_remove()`
function more noisy in case of programming errors, and avoids accessing
`funcstore->alloc` when `funcstore` was potentially already freed.
Thanks @campbellbarton for pointing this out.
This replaces the boolean Offset input in the Set Position node with
a vector input. This makes the node easier to use. Using a "Position"
input as an "Offset" sounds wrong anyway.
The Position and Offset inputs are evaluated at the same time.
The versioning only works correctly when the Offset input was not connected
to something else before.
Differential Revision: https://developer.blender.org/D12983
Introduces a dropping-controller API for the tree-view items,
`AbstractTreeViewItemDropController`. This reduces responsibilities of the main
tree-view item classes, which are already getting quite big. As I expect even
more functionality to be needed for it (e.g. drag support), it's better to
start introducing such controller types already.
The idea is to allow having a lot of non-intersecting volumes without
allocating volume stack to its full size.
With the F11285472 file the memory usage goes from 1400 MiB to 1000
on the RTX6000 card.
The fix makes it so the integrator work memory is allocated after
scene update which has downside of possible less efficient update
when some textures don't fit GPU memory, but has an advantage of
making proper decision and having a clear and consistent internal API.
Fixes memory part of T92014.
Differential Revision: https://developer.blender.org/D12966
The approach didn't turn out to be that useful after all as there
are unavoidable dependencies of data from the device. For example,
to know whether object intersects volume or not it is required to
run displacement kernels.
The way of splitting host and device updates caused state where
some data is not yet available, causing confusion and leaving
code to be error-prone.
Fixes a crash when blend thumbnails set to Camera View when there is
no camera, which resulted in use of a null region.
See D12748 for more details.
Differential Revision: https://developer.blender.org/D12748
Reviewed by Campbell Barton
This commit fixes T90633, it changes the behavior of the `Frame All`
operation when the user is tabbed into a metastrip: instead of using
the scene timeline's range, `Frame All` uses the current metastrip's
range.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D12974
When using downscaled preview size with proxies, transform effect
doesn't compensate for fact, that pixels are effectively larger. There
was compensation for scene render size already.
Use same compensation method as text effect uses for font size.
This was caused by strips with single frame input like single image
strip or color strip. their length is always 1, and so content length
was calculated to end after first frame.
There was code handling this case, but it was also checking for
`anim_endofs` and `endstill` values. Anim offset values have no effect
on these strips and still frame value was used incorrectly. So these
chacks can be removed completely.
This was caused by snap to hold offset feature, which calculates strip
content boundary, but it can be outside of strip boundary.
Clamp content start and end values so they are always inside of strip.
This commit makes sure that each attribute name is only added once
when logging geometry values for attribute search.
The `attribute_foreach` function for a single geometry component
deduplicated names, but a much more common situation is to have
more than one component in the instances of a geometry set.
Differential Revision: https://developer.blender.org/D12959
The leak happened when two things were true:
* Inside of a node group a socket is linked to a Group Input that has
a different type.
* The corresponding input on the parent Group node is not linked.
The conversion happened correctly, but the original value wasn't
destructed.
Previously, the computed value passed into the data socket could depend
on the actual field a bit. However, given that the link is marked as invalid
in the ui, the user should not depend on this behavior.
Using a default value is consistent with other cases when there are
invalid links.
This value is defined in the UI module, but happens to be used
in string_search.cc too. Note that these references need to be kept in
sync. Use escaped utf-8 sequence since the literal can be avoided.
Also replace BLI_str_utf8_as_unicode calls with constant assignments
as these values are known there is no need to decode a utf-8 sequence.
This patch renames the node "String Substring" to "Slice String"
to conform to the "verb first" naming convention.
Default length is also changed to 10 to make it easier for users
to understand what the node does.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D12931
* Open File Browser when pressing "Add Asset Library". This just makes sense,
since users have to select a directory for the asset library anyway.
* Move '+' icon back to the right side of the box. Then it is right under the
'x' icons for each indivdual library, which seems like the more natural
place.
* Correct tooltip for the "Add Asset Library" operator.
* Mark empty asset library name or paths field in red, to make clear that these
need to be set.
This node takes a geometry set with instances as input and outputs
points located on the origins of the top level of instances in the
geometry set (not nested instances). It also has position and radius
inputs to allow overriding the default, and a selection input to only
generate points for some instances.
The use case for this node is a method to use geometry proximity on
instance origins, but in a more generic way that is flexible and useful
in other situations.
Differential Revision: https://developer.blender.org/D12893
Previously, when the start input was greater than the end input,
the spline was resized to a single point. That is correct, but the
single point wasn't placed properly along the spline. Now, it is
placed according to the "Start" value, as if the trim started, but
couldn't continue because the "End" value was smaller.
This behavior is handled with a separate code path to keep each
simpler and avoid special cases. Any cleanup to reduce duplication
should focus on making each code path shorter separately rather
than merging them.
Also included are some changes to `lookup_control_point_position`
to support cyclic splines, though this single-point method is still
disabled on cyclic splines for consistency.
Fixes several notable mistakes and missing information
regarding the API documentation (*.rst).
This will allow API stub generators like bpystubgen or
fake-bpy-module to produce more accurate result.
Differential Revision: https://developer.blender.org/D12639
Because `segment_is_vector` didn't handle the combined cyclic and
single control point case, it returned false, that the "segment" should
have the resolution evaluated point count. To avoid checking the size in
every call, add an assert for the size and check it elsewhere.
Adds a filter popup to the header that allows specifiying which data-block
types to show. The menu automatically reflects all supported ID types, so it
shows a checkbox for materials, worlds and actions currently by default, and
all ID types with the "Extended Asset Browser" experimental feature enabled.
The checkboxes integrate better with the surrounding layout and are not that
attention grabbing. To my knowledge the only reason not to use checkboxes was
so the icons could be displayed. But this does it just like the Outliner filter
settings: Show the icon before the checkbox.
Also widen the popover a bit to fit longer labels (didn't fit before this patch
even).
This was reported for FCurve modifiers, but was also true (in theory) for
other instanced panels (regular modifiers, spreadsheet filters, ...),
these would not show pinning for other reasons (no caterories).
So in the case of the Graph Editor the follwing happens:
`graph_buttons_register` only registers `GRAPH_PT_modifiers`, the panel
itself has no header (PANEL_TYPE_NO_HEADER), further panels for
individual modifiers are added dynamically in `graph_panel_modifiers`.
So when pinning a particular modifier, we would pin e.g. `GRAPH_PT_noise`
(not `GRAPH_PT_modifiers`).
ED_region_panels_layout_ex would only collect panels known to
`graph_buttons_register` (so is not aware of the specific panels of
modifiers). So while I think it should be possible to pin
`GRAPH_PT_modifiers` on top of an individual modifier's panel this would
result in all modifiers being shown in other categories [which would also
be weird]. Panel header layout was also not correct (drawing the pin
icon over the modifier delete icon).
So to resolve this, just dont use pinning for these type of panels.
part of T92293.
Maniphest Tasks: T92293
Differential Revision: https://developer.blender.org/D12965
Show assets that have an unknown catalog ID assigned in the "Unassigned"
catalog.
Another catalog named "Orphans" was considered as well, but that would
clash with the usual handling of Blender (discarding orphan data on
save) and thus that idea was discarded.
Manifest Task: T91949
Keep track of unsaved asset catalog changes, in a more granular way than
just one boolean per asset library. Individual catalogs can now be
marked with a flag `has_unsaved_changes`. This is taken into account
when reloading data from the catalog definition file (CDF):
- New catalog in CDF: gets loaded
- Already-known catalog in CDF:
- local unsaved changes: on-disk catalog is ignored
- otherwise: on-disk catalog replaces in-memory one
- Already-known catalog that does not exist in CDF:
- local unsaved changes: catalog is kept around
- otherwise: catalog is deleted.
Because this saving-is-also-loading behaviour, the "has unsaved changes"
flags are all stored in the undo buffer; undoing after saving will not
change the CDF, but at least it'll undo the loading from disk, and it'll
re-mark any changes as "not saved".
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D12967
The epsilon was too optimistic. Snapping to hard-coded (0,-1,0) at
singularity should produce max delta 0.0005, but double it to be safe.
This only affects debug builds obviously.
These nodes just output a single value of their respective types,
making it possible to control multiple inputs with the same value.
Differential Revision: https://developer.blender.org/D12932
* Forbid editing linked palettes.
* Make `color` RNA property of ColorPalette '`LIB_EXCEPTION`', so that
the color buttons in the palette template remain active on linked data.
NOTE: This incidently makes linked palettes' colors editable from RNA,
not from UI though, so think this is OK for now.
This patch corrects the misalignment of some icons.
Some of them can't be centered because they would look blurry, but look better if shifted to the right instead of shifted to the left.
{F10864196 size=full} {F10864202 size=full}
{F10864216} {F10864228}
{F10864231 size=full} {F10864234 size=full}
{F10867008 size=full} {F10867015 size=full}
Reviewed By: #user_interface, pablovazquez
Differential Revision: https://developer.blender.org/D12789
Cython was already bundled with Blender's libraries in SVN (as dependency
of Numpy, see rB5bddfde217b1), but was never actually installed in the
CMake install step. As a result, `import cython` would fail. This is
now fixed.
Camera, lattice and speaker object types were missing there own proper
`USER_DUP_` flags, leading to not properly handling duplication of their
object data.
NOTE: We could probably simply opions here, by using categories (like
'GEOMETRY', 'SHADING', etc.) instead of exact object types. But this is
beyond bugfix scope.
* Additional structs added to the hipew loader for device props
* Adds hipRTC functions to the loader for future usage
* Enables CPU+GPU usage for HIP
* Cleanup to the adaptive kernel compilation process
* Fix for kernel compilation failures with HIP with latest master
Ref T92393, D12958
Actions of duplicated objects would not be properly made single user,
unlike obdata and materials.
Further more, there is no reason to manually handle such animdata
copying here, `BKE_id_copy_ex` can do that for us with the proper flags.
Now 'Make Single User' will also create local copy of linked data as
needed.
IMPORTANT: Unlike with local data, this always happen, even if linked
data has only one user. This avoids e.g. cases like two local objects
sharing a same linked mesh, then when calling 'Make Single User ->
Object and ObData' on both objects, yu expect both of your objects to
get localized meshes, not one of them keeping its linked, un-editable
mesh.
Mention required CUDA and OptiX compute capability and minimum driver
version. For HIP there is a placeholder until we know the supported
architectures.
Both material and world assets should be ready to use as non-experimental
feature. They were not enabled by default yet because the work from the
previous commit was needed first.
Objects should follow soon.
Maniphest Task: https://developer.blender.org/T91752
Updates UI code so that we can enable the asset UI for specific data-block
types by default, i.e. irrespective of the "Extended Asset Browser"
experimental feature.
"Mark as Asset" and "Clear Asset" are always visible in the Outliner context
menu now, but are grayed out if not applicable and show a disabled hint in the
tooltip.
A known side-effect of this: The "Mark as Asset" and "Clear Asset" operators
are enabled for action data-blocks now, even though only pose actions created
through the Pose Libraries add-on are supported. If this is something worth
addressing is being discussed still.
Differential Revision: https://developer.blender.org/D12955
Reviewed by: Sybren Stüvel
This triggered a compiler bug where it does not handle the sub.s16 PTX
instruction. Instead refactor the code so we don't need to do uint16_t
subtraction at all.
Also update OptiX device to remove the AO pass direct callable.
Thanks Patrick Mours for figuring this out.
This patch includes code from D9891 and D12754, so credit goes to Juanfran and Dalai.
I updated the patches to work with `master` and with the new overlay toggle.
The reason to include both changes as part of one patch is that the dimmed dashed lines work much better together with colored wires.
Theme setting for dash opacity:
{F11370574, size=full}
{F11286177, size=full, autoplay, loop}
{F11149912, size=full}
For adding the overlay I used `SpaceImageOverlay` as reference, although I'm not familiar with this code so there might be mistakes.
Reviewed By: #user_interface, HooglyBoogly
Differential Revision: https://developer.blender.org/D12886
This adds attribute search to the geometry nodes modifier
for the input and output attributes. The "New" search item
is only shown for the output attributes.
Some of the attribute search code is extracted to a new file
in the interface code, to avoid some code duplication.
The UI code required two fixes so that the search would work
for dynamic length strings (IDProperties do not have a fixed size).
Since this does changes to the UI layout of the modifier, I also
addressed T91485 here.
Differential Revisiion: https://developer.blender.org/D12788
Overlapped regions have transparent backgrounds, so when placing
AZONE_REGION we need to move them in to the content edge.
See D12956 for details and examples.
Differential Revision: https://developer.blender.org/D12956
Reviewed by Hans Goudey
This commit makes the bounding box node work on each unique geometry
(including instances) individually instead of making one large bounding
box for everything. This makes the node much faster, and is often the
desired result anyway. For the old behavior, a realize instances node
can be used in front of this node (versioning adds it automatically).
The min and max outputs now only output the values from the realized
geometry.
Differential Revision: https://developer.blender.org/D12951
To display the "disabled hint" (text explaining why a button is disabled) in a
tooltip, it would run the operator poll callback, which could then set a poll
message. But the context for the poll check wasn't the one from the button, so
the poll may give a different result (and disabled hint) than the check of the
button itself did.
Make sure it uses the exact context from the button.
When renaming an asset catalog, also update its simple name.
Catalogs will most likely be created from within Blender, so via the
catalog tree in the asset browser. Here catalogs are always named
"Catalog" until the user renames them, which was reflected in all simple
names being "Catalog".
When there are multiple catalogs with the same path (so different UUIDs
all mapped to the same catalog path), treat the first-loaded one as the
main catalog for that path, and the rest as aliases.
This ensures that the UUID of a catalog (as chosen in the tree UI and thus
interacted with by users) is stable, regardless of whether by some coincidence
later another catalog with the same UUID is created.
Rename `AssetCatalogPathCmp` to `AssetCatalogLessThan`:
- it compares more than paths (so no more `Path` in the name), and
- performs a less-than operation (so no more `Cmp` in the name).
Also restructure its code to make an extra upcoming comparison easier to
add.
No functional changes.
There were some issues when multiple inputs of the same node
were forced to be computed (e.g. for the spreadsheet), but none
of the node outputs (if existant) were used. Essentially the node
was marked as "finished" too early in this case.
This fix is necessary for the improved viewer node (T92167).
Similar to main path compaction that happens before adding work tiles, this
compacts shadow paths before launching kernels that may add shadow paths.
Only do it when more than 50% of space is wasted.
It's not a clear win in all scenes, some are up to 1.5% slower. Likely caused
by different order of scheduling kernels having an unpredictable performance
impact. Still feels like compaction is just the right thing to avoid cases
where a few shadow paths can hold up a lot of main paths.
Differential Revision: https://developer.blender.org/D12944
This is mainly for doversion code, when it needs to create new IDs those
should be considered as part of the same library as the current Main's
one.
No practical changes are expected here, this is more of a general
consistency fix, and a pre-requisite for {T92333}.
Caused by {rB43167a2c251b}
Code from above commit called RNA updates with a NULL scene.
This was already commented (and mostly handled) in rB5949d598bc33, but
the reported case was missing in that commit.
This fixes the crash in a similar manner as rB5949d598bc33.
Maniphest Tasks: T92272
Differential Revision: https://developer.blender.org/D12953
Since the introduction in rBfc5bf09fd88c, `BKE_pose_minmax` was not
taking these custom transforms into account (making "View Selected"
ignoring these as well and focusing on the bone instead).
Now consider these transforms in `BKE_pose_minmax`.
Maniphest Tasks: T92169
Differential Revision: https://developer.blender.org/D12942
This package allows Python scripts to handle compressed blend files (see
rB2ea66af742bc). This is for example needed by Blender Asset Tracer to
send files to a Flamenco render farm.
This change includes a new `WITH_PYTHON_INSTALL_ZSTANDARD` build-time
option, to control whether to actually install the package. For this the
already-existing approach for Requests was copied.
Reviewed By: LazyDodo, mont29, brecht
Differential Revision: https://developer.blender.org/D12777
certifi : 2020.12.5 → 2021.10.8
chardet : 4.0.0 → charset-normalizer 2.0.6
cython : 0.29.21 → 0.29.24
idna : 2.10 → 3.2
numpy : 1.19.5 → 1.21.2 (which makes it possible to remove our patch)
requests: 2.25.1 → 2.26.0
urllib3 : 1.26.3 → 1.26.7
Nowadays `requests` no longer depends on `chardet` but on
`charset-normalizer`. That project describes itself as:
> A library that helps you read text from an unknown charset encoding.
> Motivated by chardet, I'm trying to resolve the issue by taking a new
> approach. All IANA character set names for which the Python core library
> provides codecs are supported.
Reviewed By: LazyDodo, mont29, brecht
Differential Revision: https://developer.blender.org/D12777
Bump Python from 3.9.2 to 3.9.7, which is the latest 3.9 release at this
moment.
Updates to bundled Python packages will follow in a separate commit.
Reviewed By: LazyDodo, mont29, brecht
Differential Revision: https://developer.blender.org/D12777
Apple's international keyboards have an additional `kVK_ISO_Section`
key. With some (Italian, Spanish) keyboard layouts, this is `\`, `[` keys
which Blender keymap can use.
Right now this key is explicitly set as `Unknown`.
Note that `kVK_ANSI_Grave` is located in a different location.
Differential Revision: https://developer.blender.org/D12905
No need to report this, it just adds noise to the cmake config. The messages
that we need to keep are the ones about disabling tests when the test file or
idiff are missing.
When appending an asset from the asset browser, its asset data needs to
be cleared.
However, linking an asset (or regular append from the file browser)
should not clear such data. In linking case, it would be there again
after a blend file reload anyway.
So this commit introduces a new `BLO_LIBLINK_APPEND_ASSET_DATA_CLEAR`
option.
NOTE: in case the appended ID needs to be copied from its linked data
(instead of making the later directly local), asset data is lost anyway
since it is never copied with the ID currently.
Ref. {T91749} and D11768.
Show the scaled down tool icon when the tool region is collapsed. Show a
blank space when the tool region is visible.
* Minimize the UI flickering when changing the active tool.
* Show the active tool when the tool region is collapsed.
* Smaler header footprint (the tool name is not visible).
This is a follow up for T91536.
Differential Revision: https://developer.blender.org/D12939
We define the minimum exclusive number for our supported dependencies
versions, and not the maximum inclusive number.
Thanks to @sybren for raising this point and finding the 'mex' math
term.
This change simplifies the parameter list for these functions
and reduces the chance of typos mixing up array indices.
Missed in rB69102786047dccdcbaee0df6307a8c3364d28fe0.
Appended objects could be hidden, making any further operations
potentially skip the newly added objects.
Now FILE_AUTOSELECT asserts when newly added options aren't selectable.
De-duplicates wm_append_loose_data_instantiate_object_base_instance_init
and object_base_instance_init.
Add BLO_object_instantiate_object_base_instance_init which also adds to
a collection since all callers did this.
Since 2D cursor will be used rarely in VSE and it is adding visual
noise, it will be hidden by default.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12933
This change simplifies the parameter list for these functions
and reduces the chance of typos mixing up array indices.
Missed in rB69102786047dccdcbaee0df6307a8c3364d28fe0
This change simplifies the parameter list for these functions
and reduces the chance of typos mixing up array indices.
Reviewed By: campbellbarton
Ref D12950
Properties with `_funcs_runtime` are always saved when exporting keymaps.
This is an error since changing one changes all others.
For now, work around the problem by setting the `PROP_IDPROPERTY` flag.
Although the documentation says so, the null-terminator was missing.
This could cause crashes when logging shader linking errors as shader
sources are empty in this case.
For some reason the Annotate tool has an extra padding when compared to
other tools. This makes the UI to flicker a bit (specially with D12939
applied).
Differential Revision: https://developer.blender.org/D12943
Certain geometry nodes don't work properly on inputs that contain
instances, but don't display any warning that they aren't working.
The nodes now will display a warning that explains the situtation
iff the input contains any instances.
Differential Revision: https://developer.blender.org/D12858
In order to address feedback that the "Stable ID" was not easy enough
to use, remove the "Stable ID" output from the distribution node and
the input from the instance on points node. Instead, the nodes write
or read a builtin named attribute called `id`. In the future we may
add more attributes like `edge_id` and `face_id`.
The downside is that more behavior is invisible, which is les
expected now that most attributes are passed around with node links.
This behavior will have to be explained in the manual.
The random value node's "ID" input that had an implicit index input
is converted to a special implicit input that uses the `id` attribute
if possible, but otherwise defaults to the index. There is no way to
tell in the UI which it uses, except by knowing that rule and checking
in the spreadsheet for the id attribute.
Because it isn't always possible to create stable randomness, this
attribute does not always exist, and it will be possible to remove it
when we have the attribute remove node back, to improve performance.
Differential Revision: https://developer.blender.org/D12903
Easy now thanks to the main and shadow path decoupling. Doesn't help
in an benchmark scene except Spring, where it reduces render time by
maybe 2-3%.
Ref T87836
Taking advantage of the new decoupled main and shadow paths. For CPU we
just store two nested structs in the integrator state, one for direct light
shadows and one for AO. For the GPU we restrict the number of shade surface
states to be executed based on available space in the shadow paths queue.
This also helps improve performance in benchmark scenes with an AO pass,
since it is no longer needed to use the shader raytracing kernel there,
which has worse performance.
Differential Revision: https://developer.blender.org/D12900
This commit adds an updated version of the curve to points that
supports fields. Only the position and radius are transferred
by default now, which should improve performance. The other outputs
like tangent and rotation are outputted with anonymous attributes.
I took the opportunity to change a few other small things:
- Name geometry sockets "Curve" and "Points" like other nodes.
- Remove the radius multiple of 0.1, which was confusing.
Thanks to @Johnny Matthews (guitargeek) for an initial patch.
Differential Revision: https://developer.blender.org/D12887
Yet another try at that hairy issue... See comment in commit for
details, essentially this extend the workaround introduced in Objects'
`lib_override_apply_post` callback to try to also properly 're-use'
`OUTDATED` and `BAKED` flags from old source liboverride into new
destination one.
Use arrays for wmEvent coordinates, this quiets warnings with GCC11.
- `x, y` -> `xy`.
- `prevx, prevy` -> `prev_xy`.
- `prevclickx, prevclicky` -> `prev_click_xy`.
There is still some cleanup such as using `copy_v2_v2_int()`,
this can be done separately.
Reviewed By: campbellbarton, Severin
Ref D12901
Do not try to preserve edit modes of objects in non-active scenes (at
least for now), except for Pose mode.
Code was also slitghly refactored (reducing indent levels), and
comments about expected behaviors and known limitations were added.
This patch cleans up code for HIP device and makes it more consistent with the CUDA code.
It also fixes the issue with high VRAM usage on AMD cards using HIP allowing better performance and usage on cards like 6600XT.
Added a check in intern/cycles/kernel/bvh/bvh_util.h to prevent compiler error with hipcc
Reviewed By: brecht, leesonw
Maniphest Tasks: T92124
Differential Revision: https://developer.blender.org/D12834
If the current file is saved within an asset library, showing that asset
library in the Asset Browser will also display the assets from this current
file now. In fact, it's the latest state of the open file, including all
unsaved modifications.
These assets will show a little Blender icon in the preview image, which is our
usual icon for current file data.
Note that this means an important design change: The "Current File" asset
library isn't the only place to edit assets from anymore. From now on assets
from the current file can also be edited in the context of the full asset
library. See T90193 for more info.
Technical info:
Besides just including the assets from the current `Main`, this requires
partial clearing and reading of file-lists, so that asset operations (e.g.
removing an asset data-block) doesn't require a full reload of the asset
library.
Maniphest Task: https://developer.blender.org/T90193
Make the snap system consistent with the placement tool and leak-safe.
**Changes:**
- Store `SnapCursorDataIntern` in a `static` variable;
- Initialize (lazily) `SnapCursorDataIntern` only once (for the keymap).
- Move setup members of `V3DSnapCursorData` to a new struct `V3DSnapCursorState`
- Merge `ED_view3d_cursor_snap_activate_point` and `ED_view3d_cursor_snap_activate_plane` into `state = ED_view3d_cursor_snap_active()`
- Merge `ED_view3d_cursor_snap_deactivate_point` and `ED_view3d_cursor_snap_deactivate_plane` into `ED_view3d_cursor_snap_deactive(state)`
- Be sure to free the snap context when closing via `ED_view3d_cursor_snap_exit`
- Use RNA properties callbacks to update the properties of the `"Add Primitive Object"` operator
Caused by the Cycles-X merge.
The old style of tile rendering was removed, leaving the script to error
out trying to set the tile size.
Tile rendering came back in a new form (but only really relevant for
large resolution rendering), so now leave setting auto_tile & tile_size
alone (since previews are rendered at PREVIEW_RENDER_DEFAULT_HEIGHT 128
-- which should never make a difference here).
Maniphest Tasks: T91808
Differential Revision: https://developer.blender.org/D12937
* Show asset path in a (read only) text button. Makes it possible to see the
full path in the tooltip, brings support for copying the path and integrates
better with the sourrounding layout. Previous label needed lots of space to
show the full path without clipping.
* Remove "Details" panel, it only contained one item (description). That is
moved next to the name and asset path button.
* Use property split layout for name source and description buttons. Now that
there are multiple buttons, it's better to have a label for them.
* Always show operators for asset previews, just gray them out if not
applicable instead of hiding. Keeps the layout consistent and graying out is
less confusing than hiding UI elements.
Previously, when an item was active and its parent (or grand parent, etc.) was
collapsed, the active item would simply not be visible anymore. It seemed like
there was no active item. So instead, change the just collapsed parent to be
the active item then, so the active item stays visible.
When the input vector gets close to -Y, y and theta becomes totally
unreliable. It is thus necessary to compute the result in a different
way based on x and z. The code already had a special case, but:
- The threshold for using the special case was way too low.
- The special case was not precise enough to extend the threshold.
- The special case math had a sign error, resulting in a jump.
This adds tests for the computation precision and fixes the issues
by adjusting the threshold, and replacing the special case with one
based on a quadratic Taylor expansion of sqrt instead of linear.
Replacing the special case fixes the bug and results in a compatibility
break, requiring versioning for the roll of affected bones.
Differential Revision: https://developer.blender.org/D9551
Separate the huge test into huge logical parts and add more cases
to check. Also add a utility to check that the matrix is orthogonal,
with arbitrary epsilon values and calculations in double.
A couple of tests deliberately fail, to be fixed in following commits.
Ref D9551
This patch adds a "selected_movieclip_tracks" context member and enables
editing properties of multiple selected tracks via the usual Alt-click
editing (as well as the "Copy To Selected" operator). Both use
UI_context_copy_to_selected_list() to gather a list of other selected
items [which are now taken via said new context member]. Strictly
speaking, this could be done without the context member as well [just
gathering other selected tracks in UI_context_copy_to_selected_list()
without relying on a context member], but this might come in handy in
other places (e.g. Addons).
note: some could be desired for markers (e.g. editing pattern/search
areas of all selected track markers, but since this is burried in a
uiTemplate, this is a bit more work for another patch).
Differential Revision: https://developer.blender.org/D12923
Make building the thumbnail extraction executable optional,
disable on macOS as this was not linking, further, macOS doesn't use
this for thumbnail extraction so it could be left disabled.
Thumbnail extraction now shares code between Linux/Windows,
allowing thumbnails from Zstd compressed blend files to be extracted.
The main logic is placed in blendthumb_extract.cc and is built as static
library. For windows there is DLL which is registered during blender
install and which then reads and generates thumbnails.
For other platforms there is blender-thumbnailer executable file which
takes blend file as an input and generates PNG file. As a result
Python script blender-thumbnailer.py is no longer needed.
The thumbnail extractor shares the same code-path as Blenders file
reading, so there is no need to duplicate any file reading logic.
This means reading compressed blend files is supported (broken since
the recent move Zstd compression - D5799).
This resolves T63736.
Contributors:
- @alausic original patch.
- @LazyDodo windows fixes/support.
- @campbellbarton general fixes/update.
- @lukasstockner97 Zstd support.
Reviewed By: sybren, mont29, LazyDodo, campbellbarton
Ref D6408
This commit adds a node that can be used to find and replace strings
inside of the input string. One initial use case is to have an easier
way to add line breaks to strings to the string to curves node.
Differential Revision: https://developer.blender.org/D12721
If the Extended Asset Browser experimental feature was disabled, the asset
catalog operators wouldn't work. This wasn't intentional, catalogs aren't
considered experimental.
No longer save asset catalogs on blendfile save. Instead:
- extend the confirmation prompt for unsaved changes to show unsaved
catalogs.
- In the confirmation prompt, make catalog saving explicit & optional,
just like we do it for external images. {F10881736}
- In the Asset Browser catalog tree, show an operator icon to save the
catalogs to disk. It's grayed out if there are no changes to save, or
if the .blend wasn't saved yet (required to know where to save the
catalog definitions to). {F10881743}
Much of the work was done by @Severin and reviewed by me, then we
swapped roles.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D12796
Allow creating a new asset catalog in a yet-to-be-saved blend file. The
problem was caused by `AssetLibrary` not having an `AssetCatalogService`
right after creation; only after loading data from disk was this
instance created. It's now always there.
`outliner_draw_overrides_buts` uses `uiDefIconBlockBut` but doing so
without defining a function callback to actually build a block.
This will make the button go down the route of spawning a popup, but
without a menu. Crash then happens later accesing the (missing) menu in
`ui_handler_region_menu`.
So while we could dive into making this usage failsafe (carefully
checking `BUTTON_STATE_MENU_OPEN` in combination with
`uiHandleButtonData->menu` being NULL all over), but it seems much more
straightforward to just use `uiDefIconBut` (instead of
`uiDefIconBlockBut`) since this Override Warning buttons seem not to
intend spawning a menu anyways?
Maniphest Tasks: T92265
Differential Revision: https://developer.blender.org/D12917
In 2.93 and before, when appending wityh 'localize all' off, all linked
IDs (including indirectly linked ones) from initial library would be
made local.
In 3.0, after refactor from rB3be5ce4aad5e, only directly linked IDs
(i.e. user-selected IDs) would be made local.
This change was not intentional (result of confusing code and naming in
previous implementation), and old behavior is used in some workflows to
control which data is kept linked and which data is made local.
This commit revert to 2.93 behavior.
NOTE: there is still an (extreme) corner case where behavior is
different between 2.93 and 3.0:
If you append (at the same time) object A from LibA.blend, and object B
from LibB.blend, and object B uses somehow a material from LibA.blend:
* In 2.93, that material would have been made local (because it belonged
to one of the 'initial' libraries, even though not the initial lib of
object B).
* In 3.0, this material will remain linked, since from object B
persective it comes from a different library.
When using `asset_mark` function from a Python script and afterwards
updating the preview image, a crash might happen. The preview image is
generated by the `asset_mark` function. This may happen on a background
thread, introducing potential synchronization issues.
This patch fixes this by separating the preview generation
`ID.asset_generate_preview` from the mark as asset `ID.asset_mark`.
Note: this separation of "mark as asset" and "generate preview" also
applies to the `ED_asset_mark_id()` C function; if it is desired to have
previews rendered after marking as asset, a call to
`ED_asset_generate_preview()` is now also required.
Reviewed By: sybren
Maniphest Tasks: T91197
Differential Revision: https://developer.blender.org/D12922
This patch includes an updated version of the raycast node that uses
fields instead of attributes for inputs instead of outputs. This makes
the node's UI much clearer. It should be faster too, since the
evaluation system for fields provides multi-threading.
The source position replaces the input geometry (since this node is
evaluated in the context of a geometry like the other field nodes).
Thanks to @guitargeek for an initial version of this patch.
Differential Revision: https://developer.blender.org/D12638
Make `AssetLibraryService::get_asset_library_on_disk(path)` insensitive
to trailing slashes; i.e. `get_asset_library_on_disk("/path")` and
`get_asset_library_on_disk("/path/¨)` will now return the same
`AssetLibrary*`.
`BKE_callback_remove` now checks whether the callback actually is known,
before trying to remove it.
`BKE_blender_atexit()` runs after `BKE_callback_global_finalize()`. When
an at-exit callback tried to unregister its BKE callbacks, these would
already be unregistered, causing a crash of Blender when exiting,
This commit removes the implicit conversion from points to a mesh
that used to happen before the next modifier. It also removes the
implicit realizing of instances that happened before another modifier.
Now we have specific nodes for both of these operations, the
implicit conversions make less sense, and implicit instance
realizing has already been removed in other nodes.
This adds another geometry nodes modifier before modifiers that would
have realized instances implicitly before. Currently adding another
data-block during versioning after linking means that an assert needs
to be changed. That should be made unnecessary by T92333.
Differential Revision: https://developer.blender.org/D12722
These transparent shadows can be expansive to evaluate. Especially on the
GPU they can lead to poor occupancy when only some pixels require many kernel
launches to trace and evaluate many layers of transparency.
Baked transparency allows tracing a single ray in many cases by accumulating
the throughput directly in the intersection program without recording hits
or evaluating shaders. Transparency is baked at curve vertices and
interpolated, for most shaders this will look practically the same as actual
shader evaluation.
Fixes T91428, performance regression with spring demo file due to transparent
hair, and makes it render significantly faster than Blender 2.93.
Differential Revision: https://developer.blender.org/D12880
The motivation for this is twofold. It improves performance (5-10% on most
benchmark scenes), and will help to bring back transparency support for the
ambient occlusion pass.
* Duplicate some members from the main path state in the shadow path state.
* Add shadow paths incrementally to the array similar to what we do for
the shadow catchers.
* For the scheduling, allow running shade surface and shade volume kernels
as long as there is enough space in the shadow paths array. If not, execute
shadow kernels until it is empty.
* Add IntegratorShadowState and ConstIntegratorShadowState typedefs that
can be different between CPU and GPU. For GPU both main and shadow paths
juse have an integer for SoA access. Bt with CPU it's a different pointer
type so we get type safety checks in code shared between CPU and GPU.
* For CPU, add a separate IntegratorShadowStateCPU struct embedded in
IntegratorShadowState.
* Update various functions to take the shadow state, and make SVM take either
type of state using templates.
Differential Revision: https://developer.blender.org/D12889
Some compositing applications do not support spaces and dots in layer names, and change
these to other symbols on import. This causes various compatibility issues, including
with Cryptomatte metadata. While technically those could be considered bugs in the
Cryptomatte implementation of other software, where they are not properly accounting for
that layer renaming, it's not ideal.
The OpenEXR channel naming convention is "layer.pass.channel". We get away with dots in
the layer name since we parse this from right to left, but it's a weak assumption.
Now we don't forbid using spaces or dots, and existing files are unchanged. But at
least by default names will be compatible, and hopefully other software catches up in
time to support more flexible layer names.
Ref T68924
OpenEXR uses "." to separate layers/passes/channels, so using AOV.001 is
a problem. Other applications will not be able to parse it correctly.
Default to AOV_001 instead, and don't allow using dots in AOV names.
Fixes T89991
Ref T73266
Ref D12871
Need to initialize components for the full Diffuse BSDF.
Steps to reproduce:
- Default cube scene
- Switch to Cycles renderer
- Enable OSL backend
- Start viewport render
- Observe cube being much black
Differential Revision: https://developer.blender.org/D12921
A Clang-Format configuration to make the closure definition block to
be properly recognized as such.
Also small wrapper macro to avoid comma in the actual definition code
which was causing unwanted indentation of parameters definition.
Requires Clang-Format 7 or newer. The version we ship in the libs is
12, so for recommended development setup it should all be good.
Differential Revision: https://developer.blender.org/D12920
The thread affinity setting in OIDN can break multithreading on some CPUs.
While this leads to somewhat worse performance on CPUs that do work correctly,
it's better than having some CPUs use only half the cores.
The lookup tables are to be initialized after device free.
On Linux was only noticeable when rendering default cube scene with
an extra assert. On Windows it was causing an assert in STL in debug
builds.
Differential Revision: https://developer.blender.org/D12918
We do this in other nodes to reduce overhead of using the same node more
than once. I don't think it will make a difference with index nodes
currently, but at least it's consistent.
noise.cc uses std::min and std::max without
including the algorithm header required.
Newer MSVC versions and GCC implicitly include
it somewhere, which isn't something we should
count on. Best to include what you use.
Even though these nodes do support fields internally, there are no
input string sockets that support fields currently, so removing
the diamond sockets for now helps avoid confusion.
Differential Revision: https://developer.blender.org/D12828
Split thumbnail job in 2 passes. First pass will render visible images
and second part renders set of "guaranteed" equally spaced images.
When viewing larger amount of strips, it is likely that only 1 or 2
images will be rendered in first pass, while in second pass it is up to
30 images.
This results (seemingly) in 3x better performance, but zooming before
set of guaranteed images is done will be slightly more inaccurate.
During rendering VSE cache is invalidated, so thumbnails would be
removed and thumbnail job would constantly restart.
Even if thumbnails would be preserved, resources should be dedicated
for rendering job.
When the 'Separate Children' option is selected, the children of
the selected collection are inserted into the geometry output
sorted alphabetically by name.
One item to note is that the rename function does not trigger a
depsgraph update. This means that the changes are not reflected
in the spreadsheet until another action triggers the update.
Differential Revision: https://developer.blender.org/D12907
Move the static functions higher in the file so they are usabl
for an upcoming patch, and make it use clearer names instead
of overloading a function name.
Pencil
Not naming the auto-generated vertexgroup after the selected bone was
just confusing (since the group would not have an effect), so now use
similar code that is used for meshes for greasepencil as well.
Maniphest Tasks: T92314
Differential Revision: https://developer.blender.org/D12906
* Rename struct KernelGlobals to struct KernelGlobalsCPU
* Add KernelGlobals, IntegratorState and ConstIntegratorState typedefs
that every device can define in its own way.
* Remove INTEGRATOR_STATE_ARGS and INTEGRATOR_STATE_PASS macros and
replace with these new typedefs.
* Add explicit state argument to INTEGRATOR_STATE and similar macros
In preparation for decoupling main and shadow paths.
Differential Revision: https://developer.blender.org/D12888
Instead of switch statements, make use of generic virtual arrays
so the code is shorter and easier to read.
Differential Revision: https://developer.blender.org/D12908
It seems possible to switch object selection (if `Lock Object Modes` is
turned off) and end up with an object that has a SculptSession but a
NULL PBVH.
(I was not able to repro from scratch, but file from the report was
clearly in that state).
This would crash in displaying scene statistics.
While there might be a deeper fix (making sure PBVH is available early
enough -- possibly using `BKE_sculpt_object_pbvh_ensure`,
`sculpt_update_object` or friends), there are also many checks in tools
for PBVH, so the situation seems to be somewhat vaild/expected also in
other places.
So to fix this, just check for a non-NULL PBVH, returning early
otherwise.
Note: this leaves us with displaying 0/0 Faces & Vertices in the borked
case until an operation takes place that updates the PBVH.
Maniphest Tasks: T92246
Differential Revision: https://developer.blender.org/D12904
The old code only worked when built-in nodes are only unregistered
at most once while Blender is running. However, this is not the case
when running certain unit tests such as `AbstractHierarchy*`
in `blender_test`.
Found by Sybren, thanks.
In an attempt to reduce scrolling. This can be re-visited if a kind of switch
between "compact" and "comfortable" UI size is implemented in the future.
On GCC in release mode (and maybe also debug mode without ASAN enabled),
allocating an `AssetLibraryService` will reuse the space that should
have just been freed. This made a test fail, as it was testing that new
memory was allocated and not some old instance reused.
To ensure that the calls that should allocate a new block of memory
return a unique pointer, I added some dummy allocation to the test.
No functional changes to Blender
Previously, every node had its own declaration. This isn't ideal, because
it's often the case that all nodes of the same type have the same declaration.
That's the case for all nodes using declarations currently. It will not be true
for e.g. group nodes in the future.
Sharing node declarations between nodes makes it a bit more efficient.
Differential Revision: https://developer.blender.org/D12898
This was caused by `DRW_view_data_texture_list_size_validate` which now
delete everything from the render engine.
This might change in the future but for now we just avoid calling it from
the render loop (when using DRW_cache_restart).
CD_PROP_COLOR vertex data is stored in scene linear while legacy vertex
colors are srgb, so both operators also need to do this conversion
Reviewed By: sergey
Maniphest Tasks: T79005
Differential Revision: https://developer.blender.org/D8320
Adds a button, Update All Paths, to the Motion Paths property tabs and
will always show. The operator goes through all visible objects and
updates their motion paths.
The current implementation has a subtle functional change. Calculating
or updating motion paths for armature objects (through the Object tab,
not Armature tab) now also updates the paths for its bones. We could
preserve the old behavior but it doesn't seem necessary. It seems more
likely that the animator wants to update both anyways.
Reviewed by: sybren
Maniphest Tasks: T83068
Differential Revision: https://developer.blender.org/D11667
Add `blender::bke::AssetLibraryService` class that acts like a
blendfile-scoped singleton. It's allocated upon the first call to
`BKE_asset_library_load` and destroyed in the LOAD-PRE handler.
The `AssetLibraryService` ensures that edits to asset catalogs are not
lost when the asset browser editor closes (or even reloads). Instead,
the `AssetLibrary` pointers it owns are kept around as long as the blend
file is open.
Reviewed By: Severin
Maniphest Tasks: T92151
Differential Revision: https://developer.blender.org/D12885
The Endpoint Selection node allows for the Selection of an aribitrary
number of endpoints from each spline in a curve. The start and end
inputs are evaluated on the spline domain. The result is outputted
as a boolean field on the point domain.
Differential Revision: https://developer.blender.org/D12846
Previously, some multi-functions were allocated in a resource scope.
This was fine as long as the multi-functions were only needed during
the current evaluation of the node tree. However, now cases arise
that require the multi-functions to be alive after the modifier is finished.
For example, we want to evaluate fields created with geometry nodes
outside of geometry nodes.
To make this work, `std::shared_ptr` has to be used in a few more places.
Realistically, this shouldn't have a noticable impact on performance.
If this does become a bottleneck in the future, we can think about ways
to make this work without using `shared_ptr` for multi-functions that
are only used once.
Move most of the gizmo snap and placement code to `view_cursor_snap.c`.
Simplify and extend the snap API.
Differential Revision: https://developer.blender.org/D12868
- Rename RNA SpaceSeq.show_strip_overlay to show_overlays
matching the 3D View, the term "strip" was misleading as this is used
for the preview as well.
- Rename various RNA overlay settings to overlay_frame
since "Frame Offset" is a specific feature, avoid having both
Editor.show_overlay and SpaceSeq.show_overlays.
- Rename Editing `over_*` -> `overlay_frame_*` in DNA,
as well as flags.
This adds regression tests for exporting most of the blend files
in the io_tests/blend_geometry and io_tests/blend_scene tests.
A fix was necessary in the BlendfileLoadingBaseTest class to prevent
leakage of some global data generated when a loaded file has metaballs.
Also, had to fix the exporter to deal with empty curves.
Add an outine around the playhead, matching the color of the background (slightly darkened)
to improve the readability of the current frame line when placed against curves or strips
with a similar color.
{F10944336, size=full}
Differential Revision: https://developer.blender.org/D12810
Currently, the background color of headers gets darkened when the editor is not active,
this makes it hard to theme, and adds contrast/noise when it's not needed.
This patch makes headers use the regular theme color when the editor is not active, so it
can be made to flush with the background more easily. And lightens the header (by +10,
same value as before) when the editor is active, providing the wanted highlight.
The motivations behind this change are:
* Simplify picking a theme color for headers.
* Widgets already become lighter on mouse hover, this change creates a connection with that concept.
Left: current master, inactive header is darkened.
Right: this patch, inactive header gets the theme color, active editor gets header in a slightly lighter color (like most widgets)
{F11052503, size=full, loop, autoplay}
Reviewed By: #user_interface, HooglyBoogly
Differential Revision: https://developer.blender.org/D12856
Back in Blender 2.30, the GUI project brought panels into Blender among other important visual updates.
For the first time it was possible to move the wall of buttons around. Providing a clear separation
between sections (it even allowed the grouping of panels in tabs!)
During the 2.5 redesign, the separation between panels became a line on top of each panel, and panels received
theme settings for background and header colors. The default theme used the same color for both.
In 2.8 the background color of panels was different from headers in the default theme, so the separator
line was removed. While the separator line wasn't elegant (only on top, non-themeable, hard-coded emboss effect),
it provided a sort of separation between panels.
This patch solves the panels-separation by simply adding a margin space around them (not visible in default theme yet).
Even though the margin reduces the width of the working area slightly, it makes room for the upcoming always-visible scrollbars.
Other adjustments:
* Use arrow icon instead of triangle to collapse/expand
* Use rounded corners to match the rest of the UI (editor corners, nodes, etc).
{F10953929, size=full}
Margin on panels makes use of the `style->panelouter` property that hasn't been
used in a while. Also slight tweaks to `boxspace` and `templatespace` style properties so they
are multiples of 2 and operations on them round better.
There is technically no need to update the themes for them to work, so no theme changes are included in this patch.
{F10953931, size=full}
{F10953933, size=full}
{F10953934, size=full}
{F10954003, size=full}
----
A new theme setting under Style controls the roundness of all panels (added it to Style instead of ThemeSpace because I think controlling the panel roundness per editor is a bit overkill):
{F11091561, size=full, autoplay, loop}
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D12814
This does not change the behavior when there are no mistakes in the node tree.
The visualization does change when a field is connected to an input that cannot
be a field.
Differential Revision: https://developer.blender.org/D12877
Feedback was that the two column menu felt odd, and that the "Custom" and
"Built-in" headings for each column were more confusing than helpful. So
changing this to a single column menu with separator lines instead of headings.
Tools currently used by VSE don't have much useful settings, but they
use a lot of space. Therefore these headers will be hidden by default.
Property `show_region_tool_header` was added to view menu to enable tool
settings.
This could be resolved by region overlap, but it isn't working well
currently.
Differential Revision: https://developer.blender.org/D12875
Since points aren't relevant in function nodes, replace all mentions
of it with "local" to illustrate rotations done in local-space instead.
Differential Revision: https://developer.blender.org/D12881
Commit 213554f24a added slope/offset/power controls to the sequencer
color balance modifier, but colors in this mode were not initialized
with old files.
Initialize colors to default values.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D12806
Commit e1665c3d31 added math to do 2D affine transformations with 3x3
matrices, but these matrices are also used for 3D transformations.
Remove added functions and use 4x4 matrices for 2D transformation.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12510
Issue was caused by adding `seq->sound` check in ded68fb102 in
function `BKE_sound_scene_add_scene_sound` as `offset_time` field was
introduced to resolve sub-frame a/v misalignment.
Scene strips don't have `bSound` allocated but also don't suffer from
a/v misalignment.
Remove `seq->sound` check and don't apply any offset for scene strips.
Reviewed By: zeddb, sergey
Differential Revision: https://developer.blender.org/D12819
This is caused by removing `gizmo_cage2d_modal()` code in 482806c816.
Some areas use cage gizmo to modify RNA properties without using
transform operator like area light, image empty, and compositor preview.
This functionality is implemented in code that was removed.
Add this code back.
Reviewed By: zeddb, campbellbarton
Differential Revision: https://developer.blender.org/D12859
Replaces the old Subdivision Surface Node.
Changes:
- Removes implicit instance realization, instead the node runs once
per unique instance.
- "Use Creases" becomes a crease field input applied to edges.
The values are clamped between zero and one.
Addresses T91763
Differential Revision: https://developer.blender.org/D12830
The object info node output an instance as a performance optimization.
Before that optimization was (almost) invisible to the user, but now
that we aren't automatically realizing instances, it isn't intuitive
for a single object to become an instance.
I refactored the transform node so its ability to translate/transform
an entire geometry set was more usable from elsewhere and exposed the
function to get a geometry set from an object.
Differential Revision: https://developer.blender.org/D12833
This commit adds an updated version of the old attribute transfer node.
It works like a function node, so it works in the context of a
geometry, with a simple data output.
The "Nearest" mode finds the nearest element of the specified domain on
the target geometry and copies the value directly from the target input.
The "Nearest Face Interpolated" finds the nearest point on anywhere on
the surface of the target mesh and linearly interpolates the value on
the target from the face's corners.
The node also has a new "Index" mode, which can pick data from specific
indices on the target geometry. The implicit default is to do a simple
copy from the target geometry, but any indices could be used. It is also
possible to use a single value for the index to to retrieve a single
value from an attribute at a certain index.
Differential Revision: https://developer.blender.org/D12785
Instead of checking whether the socket value was hidden, use the proper
node declaration to check whether the socket has an implicit input. The
remaining larger change to make is allowing nodes to specify what their
implicit input should actually be.
This commit removes the constant padding around to the left and
right of the curve widget. The padding worked in screen space and
didn't take UI scale/zoom into account. This makes the curve widget
consistent with the more recently added curve profile widget used
for bevel profiles.
Differential Revision: https://developer.blender.org/D12883
Checking RNA_MAGIC is not enough to identify the ID property case which always
needs updates. If the property is already resolved to an RNA property we need
to check the flag too.
This menu doesn't have an effect on the importing while in the "Current File"
asset library. This can be quite confusing.
However, just hiding the menu may be a temporary solution. Decision
actually to instead show a different menu, that allows choosing between
duplicating and reusing data on drop. This is being reviewed here
https://developer.blender.org/D12879.
Meanwhile (or in case we end up rejecting that), this change should
avoid some confusion.
Differential Revision: https://developer.blender.org/D12752
This is caused by {rB3b6ee8cee708}.
Since rigging curves with armatures only works with envelopes (if I am
not mistaken), this stirs up the question again why we actually give the
choice for vertex groups in parenting. Anyways, curves can have armature
modifiers and renaming bones should not crash.
Now make sure we only go down the route of `BKE_object_defgroup_list`
and `BKE_object_defgroup_find_name` if vertex groups are actually
supported.
Maniphest Tasks: T92083
Differential Revision: https://developer.blender.org/D12876
There was a rare crash in WM_event_get_keymap_from_toolsystem_fallback
when wm->winactive was NULL.
This could happen when the event was handled
immediately after closing a window.
The issue was that this menu was only looking at socket templates,
but not at the new node declarations. This fix is to just check those
as well. The fix comes with a small refactor that makes the memory
management a bit simpler.
Differential Revision: https://developer.blender.org/D12866
`BLF_height_max()` uses the tallest character in the font, and many characters
in our font are taller than numbers. Use `BLF_height` with `0` as reference instead.
Fix by @harley, thanks!
There were several places attempting to check to see if scene lights
and world were enabled for display. This tries to find a common place
for both of these to reduce duplication.
Honestly, I couldn't find a really good spot for these and settled on
DRW_engine. It's not the best spot since they're not strictly drawing
related, but let's start here.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D12658
Shortcut lookups for property buttons were only supported for a subset
of RNA types.
Replace inline data-path calculation with
WM_context_path_resolve_property_full.
Now the shortcut for the 3D View's overlay toggle (for e.g.) is shown.
In editors with vertical scale indicators, such as Graph Editor,
Drivers, or VSE, display the values aligned to the view.
Also add a shadow (similar to the 3D View info) to improve readability when the text is on top of curves, strips, or other content.
{F10987240, size=full}
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D12809
While there may be arguments for different positions of the selection
inputs, it's important to be consistent, and putting them right after
the corresponding geometry works well when there are multiple
geometry inputs. Addresses T91646.
Avoiding creating empty components can be a hassle for code that
interacts with a geometry set. One easy way to do that was calling
the functions that retrieved mutable access to geometry data directly,
like get_mesh_for_write. This commit makes it so that sort of direct
function does not create an empty component if there is no data.
Another way to create an empty component was calling the replace_*
methods with a null pointer. It's more convenient to have a nice API
that handles those cases without creating an empty component.
It's still convenient that the regular get_component_for_write adds
the component if it doesn't exist, because that's often a nice way to
add data to the geometry set.
Differential Revision: https://developer.blender.org/D12862
This commit adds a fields version of the mesh to curve node, with a
field for the input selection. In order to reduce code duplication,
it adds the mesh to curve conversion to the new geometry module
and calls that implementation from both places.
More details on the geometry module can be found here: T86869
Differential Revision: https://developer.blender.org/D12579
Currently `PoseBone.children` is implemented by a linear scan of
the list of armature bones. This is doubly inefficient, since
not only is it scanning all bones, the `obj.data.bones` list
is actually synthetic and generated from Bone children lists.
Instead, use the `Bone.children` native RNA property.
Differential Revision: https://developer.blender.org/D12727
Regression introduced in {rBb0d9e6797fb8}.
Previously the Graphics Editor had a conflict with two different snap
types. Auto-Snap and Snap with Ctrl.
It is now clearer which snap should prevail.
Sometimes it's useful to pass around a set of values with a generic
type. The virtual array data structures allow this, but they don't
have logical ownership. My initial use case for this is as a return
type for the functions that interpolate curve attributes to evaluated
points, but a need for this data structure has come up in a few other
places as well. It also reduced the need for templates.
Differential Revision: https://developer.blender.org/D11103
This is the first of a sequence of changes to support compiling Cycles kernels as MSL (Metal Shading Language) in preparation for a Metal GPU device implementation.
MSL requires that all pointer types be declared with explicit address space attributes (device, thread, etc...). There is already precedent for this with Cycles' address space macros (ccl_global, ccl_private, etc...), therefore the first step of MSL-enablement is to apply these consistently. Line-for-line this represents the largest change required to enable MSL. Applying this change first will simplify future patches as well as offering the emergent benefit of enhanced descriptiveness.
The vast majority of deltas in this patch fall into one of two cases:
- Ensuring ccl_private is specified for thread-local pointer types
- Ensuring ccl_global is specified for device-wide pointer types
Additionally, the ccl_addr_space qualifier can be removed. Prior to Cycles X, ccl_addr_space was used as a context-dependent address space qualifier, but now it is either redundant (e.g. in struct typedefs), or can be replaced by ccl_global in the case of pointer types. Associated function variants (e.g. lcg_step_float_addrspace) are also redundant.
In cases where address space qualifiers are chained with "const", this patch places the address space qualifier first. The rationale for this is that the choice of address space is likely to have the greater impact on runtime performance and overall architecture.
The final part of this patch is the addition of a metal/compat.h header. This is partially complete and will be extended in future patches, paving the way for the full Metal implementation.
Ref T92212
Reviewed By: brecht
Maniphest Tasks: T92212
Differential Revision: https://developer.blender.org/D12864
This is available in the DopeSheet, GraphEditor, and NLA Editor.
Currently:
- Dopesheet advertises to take selection into account...
-- ...but doesnt - which might be a mistake in rBe3842d1ca4dd
- Graph Editor does not mention selection...
-- ...and also does not take it into account
- NLA does not mention selection...
-- ...but takes it into account
Now:
- make them **all** take selection into account (you can still do a
quick 'Select All' prior to get the full range -- better than not being
able to set this based on selection)
- mention this for all in the tooltip
- also reword to 'Set Preview Range to Selected' since using the term
'Auto' impilies this would change on selection change.
Maniphest Tasks: T91743
Differential Revision: https://developer.blender.org/D12651
The sockets are not exposed in any nodes yet.
They work similar to the Object/Collection/Texture sockets,
which also just reference a data block.
Based on rB207472930834
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D12861
Remove `BLI_assert_unreachable()` in a spot that is actually easily
reachable. To reach, follow these steps:
- Configure three asset libraries (say A, B, and C) in preferences
- Set the asset browser to library C and save the file
- Remove asset library C from the preferences
- Reopen the file.
This patch adds activate_file_by_relative_path(relative_path="") and
deselect_all() function to the space api of the File Browser. While the
first sets the active file and adds it to the selection based on a
relative path to the current File Browser directory the second one
deselects all files but does not change the active file.
Differential Revision: https://developer.blender.org/D12826
Reviewed by: Julian Eisel
The Alembic/CacheFile modifier supports Cycles procedurals when Cycles
is configured to use experimental features; the check for this would
segfault on builds with `WITH_CYCLES=OFF`. This is now fixed by adding
an extra NULL check.
This was caused by camera background being rendered in world space, causing
floating point imprecision issues when camera was far from origin.
Adding a uniform to change vertex shader to process everything in viewspace
to fix the problem.
The assumption about absent shadow path was wrong.
The rest of the changes are to ensure shadow paths are finished prior
to the split, so that they write to the proper passes.
The issue was caught by running regression tests on OptiX.
Differential Revision: https://developer.blender.org/D12857
Object deletion was reporting the number of objects deleted,
causing tests to print noisy output.
Now this is information is only included when invoked.
Add a boolean field to the Set Position Node. This value allows
for each point to either have its position set to the input position
value or have the input value added to the current position.
Differential Revision: https://developer.blender.org/D12773
This is especially noticeable when using the default center with full
width and height as some borders are masked by 1 pixel.
The relative coordinates are now calculated respect the last ones
instead of the dimensions for centering, and the limits
are inclusive to mask more accurately.
The planar reflections being rendered at the same resolution as the HiZ max
buffer, do not need any uv correction during raytracing.
However, the GTAO horizon buffer being at output resolution do need the
uv factors in order to match the pixels visible on screen. To avoid many
complication, we increase the size of the GTAO texture up to the hiz buffer
size. This way, if planar reflections need GTAO the texture is big enough.
We change the viewport of the GTAO framebuffer for the main view in order
to not have to modify Uvs in many places.
This changes the edge split node to have a selection input, which is
more aligned with the other design changes. This loses the ability to
split edges based on an angle, but the edge angle can be added as a
field input node in the future, which will make for a much more
flexible system.
Differential Revision: https://developer.blender.org/D12829
Previously the attribute capture node only worked on realized geometry,
which was very confusing when other nodes worked on each individual
instance. The realize instances node is the way to explicitly change
between the two behaviors. Addresses T92155.
Differential Revision: https://developer.blender.org/D12841
Adds a node that can rotate each of a geometry's instances in global
(to the modifier object) or local space (of each point) by a specified
angle around a pivot point.
In the future, separating the local-global choice for the pivot and the
rotation might be useful. However, for now the node is kept simple.
Differential Revision: https://developer.blender.org/D12682
These 2 large tables, `areaTexBytes` and `searchTexBytes`, contributed
~176kb worth of duplicate data into the `blender` executable due to the
header being used in multiple places. We were lucky that only 2
translation units had included this header so only 1 duplicate copy of
each was wasted.
Define the tables as `extern` to address this.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D12723
Adds a node that can scale a geometry's instances. With "Local" turned
on, the instance is scaled individually from the center point input,
while when local space is turned off, it's more like the transform
node, except it scales outward from the center point instead of only
from the origin.
Differential Revision: https://developer.blender.org/D12681
Add a boolean selection field to the Instance on Points node.
This will select which points from the source geometry will be used
to create the instances.
Differential Revision: https://developer.blender.org/D12847
Adds a node that can translate instances in the transform space of
the modifier object, or the local space of their original transform.
One reason to have a special node for instances is that they always
have the existing transform, unlike mesh or point cloud points.
Differential Revision: https://developer.blender.org/D12679
Copy-on-write data blocks could be referenced from python but were not
properly managing python reference counting.
This would leak memory for any evaluated data-blocks accessed by Python.
Reviewed By: sergey
Ref D12850
Seems to be residue from an early 2.80 days: the placeholder code path
is no longer used.
Remove all the tricky code for this, and make it clear that the
`deg_expand_copy_on_write_datablock` is used on an non-expanded
datablock.
Should be no functional changes. And should help simplify D12850.
Differential Revision: https://developer.blender.org/D12852
Menu items ignore the roundness setting since they spread left to right.
This patch makes it so menu items use the theme preference instead of
hardcoded square corners. Providing more flexibility to themes.
All built-in and included themes already have this set so no need to update them. For the default themes (Dark/Light) roundness is 0.4.
{F10950727, size=full}
The motivations behind this change are:
* To be more consistent with other widgets.
* Improve themes flexibility.
* Match padding with other elements that have like the Search field:
{F10950746, size=full}
Reviewed By: #user_interface, Severin
Differential Revision: https://developer.blender.org/D12813
Change is simple enough, but we abuse a bit the UI code here to get a
similar 'look' as the fake user button for the new Asset one, while
still being able to call an operator instead of editing directly a RNA
value.
Reviewed By: Severin, sybren
Maniphest Tasks: T92113
Differential Revision: https://developer.blender.org/D12839
This reverts commit 0558907ae6.
Based on discussion with Sergey, having Python references to un-expanded
data should not happen - this change needs to be reconsidered.
When baking in a debug build running gdb it kept asserting because a GL context was being created outside the main thread.
To fix this the patch only creates the GL context is only created for rendering (when it is actually used).
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D12767
Some runtime data that stores which sockets can be fields and which
can't is not stored in the file, but only calculated when necessary.
When opening a file, the node tree update function was called, which
recalculated this data, but that was explicily turned off for undo.
This exposes a fundamental issue with undo, the ID caching system for
undo, and how it relates to node trees in particular. Ideally this call
couldn't be necessary at all. In the future it could be removed by
adding a runtime struct to node trees, and calculating its contents
on-demand instead of preemtively.
Differential Revision: https://developer.blender.org/D12699
Check when the node fails to create BVH trees, and fill the result
with zero in that case, which is most likely the expected value when
the node encounters an error. Warnings will be added with a separate
patch.
When assigning a new catalog ID to an asset, also refresh the "catalog
simple name". This "simple name" is stored on the asset metadata next to
the catalog UUID, to allow some emergency data recovery when the catalog
definition file is somehow lost.
There was only a check for the component but not for if it was empty.
Because the curve fill node produces an empty curve component, a
nullptr was read, causing a crash. Generally nodes shouldn't produce
empty components, but currently we cannot rely on that fact.
Differential Revision: https://developer.blender.org/D12838
There was a double lock in the object depth drawing function.
Also the texture read was not reading the texture with the right
format. Now it needs a conversion.
Fix T91981 Particle Edit make Blender Crash
Fix T92006 Light spot interactively point can't use
This makes sure the previously bound context is restored after creating a
new context. This follows what is already happening on windows.
All system backend are patched.
This also removes the goto and some code duplication.
Differential Revision: https://developer.blender.org/D12455
Since `AssetCatalogPath` isn't default constructible (unlike the
previous `CatalogPath`, alias `std::string`), `AssetCatalog` isn't
default constructible either. But its default constructor is declared
with `= default` which Apple Clang was warning about.
Differential Revision: https://developer.blender.org/D12714
Reviewed by: Sybren Stüvel
This confirmation popup was added when deletion was a destructive action that
would be written to disk immediately, with no way to undo. Now we only write
such changes to disk on .blend file save, plus there's undo/redo support for
catalog edits now. In such cases confirmation popups should be avoided.
Allow undo/redo of asset catalog edits with Ctrl+Z/Ctrl+Shift+Z. These
keys are registered in the 'screen' keymap, so that they can take
priority over the global undo/redo operators.
Updated both Blender Default and Industry Compatible keymaps.
Ensure that catalog operations create an undo snapshot, and show
undo/redo operators in the asset browser.
A hidden operator `ASSET_OT_catalog_undo_push` is also added such that
add-ons can also set undo snapshots if they need.
Rename `bke::AssetCatalogService::store_undo_snapshot` to `undo_push`.
This makes the function named the same way as the global Blender "undo
push" function.
No functional changes.
Add an undo stack for catalog edits. This only implements the backend,
no operators or UI yet.
A bunch of `this->xxx` has been replaced by `catalog_collection_->xxx`.
Things are getting a bit long, and the class is turning into a god
object; refactoring the class is tracked in T92114.
Reviewed By: Severin
Maniphest Tasks: T92047
Differential Revision: https://developer.blender.org/D12825
Recursively delete asset catalogs with `AssetCatalogService:prune_...`
functions. This deletes the catalog and all of its children.
The old `delete_catalog` function has been renamed to
`delete_catalog_by_id()`, and is now a lower-level function (no deletion
of children, no rebuilding of the tree). The `prune_catalogs_by_path()`
and `prune_catalogs_by_id()` do delete children and do rebuild the
catalog tree.
Manifest task: T91634
Simplify the testing code that verifies the asset catalog tree. It now
prints clearer error messages when things go wrong, and it gets simpler
data to test (instead of having to explicitly pass the parent count, it
just counts the number of separators in the expected path).
No functional changes to Blender.
Keep track of the source library allowing other parts of the code to
to make better decisions. This is needed to localize external files.
In this case the file paths are updated when `making local`.
But we should decide based on the source library if we want to
copy the file relative to the new blend file. See D12423.
Reviewed By: mont29, Severin
Differential Revision: https://developer.blender.org/D12765
Addresses T77127 (Controller Drawing).
Adds VR controller visualization and custom drawing via draw
handlers. Add-ons can draw to the XR surface (headset display) and
mirror window by adding a View3D draw handler of region type 'XR' and
draw type 'POST_VIEW'. Controller drawing and custom overlays can be
toggled individually as XR session options, which will be added in a
future update to the VR Scene Inspection add-on.
For the actual drawing, the OpenXR XR_MSFT_controller_model extension
is used to load a glTF model provided by the XR runtime. The model's
vertex data is then used to create a GPUBatch in the XR session
state. Finally, this batch is drawn via the XR surface draw handler
mentioned above.
For runtimes that do not support the controller model extension, a
a simple fallback shape (sphere) is drawn instead.
Reviewed By: Severin, fclem
Differential Revision: https://developer.blender.org/D10948
As part of expected behavior this printed an exception,
making it seem as if there was an error in the test.
Now the exception is suppressed from the output, ensuring it matches
an the expected output.
Introduces `BKE_appdir_folder_caches` to get the folder that
can be used to store caches. On different OS's different folders
are used.
- Linux: `~/.cache/blender/`.
- MacOS: `Library/Caches/Blender/`.
- Windows: `(%USERPROFILE%\AppData\Local)\Blender Foundation\Blender\Cache\`.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D12822
Integrates XR input actions with the WM event system. With this commit,
all VR action functionality (operator execution, pose querying, haptic
application), with the exception of custom drawing, is enabled.
By itself, this does not bring about any changes for regular users,
however it is necessary for the upcoming VR add-on update that will
expose default controller actions to users.
For add-on developers, this updates the Python API with access to XR
event data (input states, controller poses, etc.), which can be
obtained via the "xr" property added to the bpy.types.Event struct.
For XR events, this property will be non-null and the event will have
the type XR_ACTION.
Further details:
XR-type window events are queued to the regular window queues after
updating and interpreting VR action states. An appropriate window is
found by either using the window the VR session was started in or a
fallback option.
When handling XR events, mouse-specific processing is skipped and
instead a dedicated XR offscreen area and region (see 08511b1c3d) is
used to execute XR event operators in the proper context.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D10944
Previously the functions called `hash_float` instead of `uint_to_float_01`.
This meant that the float was hashed twice instead of once.
The new functions are also compatible with Cycles/Eevee.
Differential Revision: https://developer.blender.org/D12832
For fixed pivots, make sure the correct pivot axis is being used.
Also add continues or invalid rotations.
Differential Revision: https://developer.blender.org/D12824
For details see the "Extending the Disney BRDF to a BSDF with Integrated
Subsurface Scattering" paper.
We split the diffuse BSDF into a lambertian and retro-reflection component.
The retro-reflection component is always handled as a BSDF, while the
lambertian component can be replaced by a BSSRDF.
For the BSSRDF case, we compute Fresnel separately at the entry and exit
points, which may have different normals. As the scattering radius decreases
this converges to the BSDF case.
A downside is that this increases noise for subsurface scattering in the
Principled BSDF, due to some samples going to the retro-reflection component.
However the previous logic (also in 2.93) was simple wrong, using a
non-sensical view direction vector at the exit point. We use an importance
sampling weight estimate for the retro-reflection to try to better balance
samples between the BSDF and BSSRDF.
Differential Revision: https://developer.blender.org/D12801
There is not enough time before the release to improve Random Walk to handle
all cases this was used for, so restore it for now.
Since there is no more path splitting in cycles-x, this can increase noise in
non-flat areas for the sample number of samples, though fewer rays will be traced
also. This is fundamentally a trade-off we made in the new design and why Random
Walk is a better fit. However the importance resampling we do now does help to
reduce noise.
Differential Revision: https://developer.blender.org/D12800
This commit implements T91780, adding nodes to get and set builtin
attributes. Individual set nodes are used so that the values can be
exposed for direct editing, which is useful for attributes like shade
smooth and spline resolution. Individual input nodes are used to allow
reusing nodes for multiple components, and to allow grouping multiple
outputs conceptually in the same node in the future.
Input Nodes
- Radius
- Curve Tilt
- Curve Handle Positions
- Is Shade Smooth
- Spline Resolution
- Is Spline Cyclic
'Set' Nodes
- Curve Radius
- Point Radius
- Curve Tilt
- Curve Handle Positions
- Is Shade Smooth
- Spline Resolution
- Is Spline Cyclic
Using hardcoded categories is necessary to add separators to the node
menu.
Differential Revision: https://developer.blender.org/D12687
Delete Geometry:
This adds a copy of the old node in the legacy folder and updates the
node to work with fields. The invert option is removed, because it is
something that should be very easy with fields, and to be consistent
with other nodes which have a selection. There is also a dropdown to
select the domain, because the domain can't be determined from the
field input. When the domain does not belong on any of the components
an info message is displayed.
Separate Geometry:
A more general version of the old Point Separate node. The "inverted"
output is the same as using the delete geometry node.
Differential Revision: https://developer.blender.org/D12574
Only count volume objects after shader optimization.
Allows to discard objects which don't have effective volume
BSDF connected to the shader output (i.e. constant folded,
or non-volume BSDF used by mistake).
Solves memory regression reported in T92014.
There is still possibility to improve memory even further
for cases when there are a lot of non-intersecting volume
objects, but that requires a deeper refactor of update
process. Will happen as a followup development.
Differential Revision: https://developer.blender.org/D12797
This function now takes a depsgraph and a list of objects to avoid
inefficient O(n^2) iteration when extracting instances from all objects
in the scene. Returning an object -> instance map.
Note that keeping compatibility with the existing API wasn't practical
in this case since instances can no longer be generated from the scene
and it's objects.
The longer-term goal is to separate host-only scene update
from device update: make it possible to make kernel features
depend on actual scene state and flags.
This change makes it so shaders are compiled before kernel
load, making checks like "has_volume" available at the
kernel features calculation state.
No functional changes are expected at this point.
Differential Revision: https://developer.blender.org/D12795
In the original code depth=0 meant that there was no parents. But with
BLI_listbase_count we have depth 1 in those cases.
Differential Revision: https://developer.blender.org/D12817
The problem is that the fast triangulator (based on polyfill)
sometimes makes degenerate triangles. Commit 8115f0c5bd91f had
a check for degenerate triangles but it wasn't thorough enough.
This commit uses a more thorough (and pessimistic) test for
degenerate triangles, using the exact triangulator in those cases.
This commit introduces the Align Euler to Vector function node which
rotates to a body into a given direction. The node replaces the legacy
"Align Rotation to Vector" node, which only worked on an attribute
named `rotation` internally. The "Euler" in the name is meant to make
it clearer that the rotation isn't interchangeable with a regular
vector.
Addresses T91374.
Differential Revision: https://developer.blender.org/D12726
Strip was flagged for deletion in `seq_transform_handle_overwrite()`
on `STRIP_OVERLAP_IS_FULL`. Then it is removed in
`SEQ_edit_strip_split()` before it should be.
Handle `STRIP_OVERLAP_IS_FULL` in separate loop.
This may not be complete solution, because in example file overlap is
caused between 2 transformed strips and one that is "static".
Such operation should not be possible in first place. This fixes the
crash at lest, so improvement in behavior can be handled separately.
Differential Revision: https://developer.blender.org/D12751
This was caused by confusing naming of frame overlay feature.
Correct flag to use is `sseq->flag & SEQ_SHOW_OVERLAY`, not
`ed->over_flag & SEQ_EDIT_OVERLAY_SHOW`.
- Fix a typo that used the max instead of the min for the soft max
- Assign the correct "last property type" when the operator starts
- Only check values for the soft range when use soft range is turned on
The context menu is a standard way to expose operations of the clicked
item to the user. They expect it to be there, and we can make use of it
as a place to put more advanced operations in.
The menu contains:
* New Catalog
* Delete Catalog
* Rename
Also removes the 'x' icon to delete a catalog from the right side of a
row. This was just placed there temporarily until the context menu is
there. It's too easy to accidentally delete catalogs with this.
Tree-view items can now easily define their own context menu. This works
by overriding the `ui::AbstractTreeViewItem::build_context_menu()`
function. See the documentation:
https://wiki.blender.org/wiki/Source/Interface/Views#Context_Menus
Consistently with the Outliner and File Browser, the right-clicked item
also gets activated. This makes sure the correct context is set for the
operators and makes it clear to the user which item is operated on.
An operator to rename the active item is also added, which is something
you'd typically want to put in the context menu as well.
Enabling or disabling motion blur requires rebuilding the BVH of affected geometry and
uploading modified vertices to the device (since without motion blur the transform is
applied to the vertex positions, whereas with motion blur this is done during traversal).
Previously neither was happening when persistent data was enabled, since the relevant
node sockets were not tagged as modified after toggling motion blur.
The change to blender_object.cpp makes it so `geom->set_use_motion_blur()` is always
called (regardless of motion blur being toggled on or off), which will tag the geometry
as modified if that value changed and ensures the BVH is updated.
The change to hair.cpp/mesh.cpp was necessary since after motion blur is disabled,
the transform is applied to the vertex positions of a mesh, but those changes were not
uploaded to the device. This is fixed now that they are tagged as modified.
Maniphest Tasks: T90666
Differential Revision: https://developer.blender.org/D12781
This bug was introduced in D12190 because the list of types that support materials did not include GPencil and this caused all materials to be removed after they were created during conversion.
If the operator poll of a superimposed icon returned `false`, the
superimposed icon would just draw normally and fail silently. Instead it
will now be drawn grayed out, plus the tooltip of the icon can show the
usual "disabled hint" (a hint explaining why the button is disabled).
This seems to happen only in a few files, and not so trivial to
reproduce from scratch.
The crash is real though, and this fixes it.
It also fix a wrong comment style that was introduced in the same faulty
commit.
Bug introduced on ebe2374528.
Differential Revision: https://developer.blender.org/D12794
Previously this was only happening when "Load UI" was enabled,
making it difficult for Python script authors to know when
re-registering subscribers was needed.
Only copy required part of volume stack instead of entire stack.
Solves time regression introduced by D12759 and avoids need in
implementing volume stack calculation to exactly match what the
path tracing will do (as well as potentially makes scenes with
a lot of volumes ans a tiny bit of deeply nested ones render
faster).
Still need to look into memory aspect of the regression, but
that is for separate patch.
Ref T92014
Maniphest Tasks: T92014
Differential Revision: https://developer.blender.org/D12790
The breadcrumbs alone may not be enough to indicate that a user is
inside a nodegroup. The original dark green color was a bit overwhelming
but having a different background helps.
This is a follow up to 919e513fa8.
In previous Blender version the tile highlight was stored in the
full frame (un-cropped) space. This was changed with the Cycles X
development and now the tiles and render result are always measured
relative to the cropped region.
Differential Revision: https://developer.blender.org/D12779
In a couple of places in the UI, we show superimposed icons on buttons
to execute an operation (called "Extra Icons" internally). Hovering them
would show the tooltip of the underlying button, which is misleading and
confusing.
There are cases where it's not obvious what an icon does, so a tooltip
would be quite useful here. It's likely we are going to use superimposed
icons in more places in the future, e.g. see D11890.
The extra icon basically acts as an override for the button in the
tooltip code.
Differential Revision: https://developer.blender.org/D11894
Reviewed by: Campbell Barton
Document that `bpy.msgbus.subscribe_rna()`-registered messagebus
subscriptions will be cleared whenever a new blend file is loaded.
Passing `options={'PERSISTENT'}` has no influence on this behaviour.
Disables undo for:
* The tree row collapsing - which doesn't make sense to undo, isn't
supported by the undo system, and just triggers the confirmation
prompt when closing the file.
* Renaming items - While this may make sense in some cases, users of the
tree-view API can explicitly do an undo push. For asset catalogs it's
not supported.
Moved function definitions around so that all members of a class are
next to each other. Previously some functions of one class were sitting
between functions of another class.
No functional changes.
Make the "xform" tool/gizmo available for strip transformations in the
sequencer preview window.
Because of the amount of hacks needed to make the gizmo work nicely with
multiple strips at the same time, it was decided to only show the
translate gizmo when multiple strips are selected.
This is because the transforms with multiple strips would appear buggy
because of our lack of shearing support in the transform system.
There is also currently no way to properly sync the gizmo drawing with
the transform when using multiple strips.
Reviewed By: Richard Antalik, Campbell Barton
Differential Revision: http://developer.blender.org/D12729
While drawing cleared this value (as part of temporary fix from 2009),
this was still being checked until recently.
Remove this value in versioning code.
Also clear unused text space flag.
- Drawing annotations used a deprecated value to detect
if drawing was supported.
- ED_space_sequencer_check_show_strip was checking the preview
image type (which doesn't impact strip display).
Signed-off-by: Campbell Barton <ideasman42@gmail.com>
Move texture nodes to C++ and use new socket declaration
Brick, Checker, Image, Magic and Wave
Differential Revision: https://developer.blender.org/D12778
This caused problems calling screenshot from menu-search
which included the status text in the screenshot.
Now the status text is shown in the global status bar
for any operators called from a screen context.
- Use 2D cursor in the preview space using shortcuts
matching the UV editor and 3D view.
- Add Cursor tool, cursor transform.
- Support for cursor and bound-box pivot.
- Add pivot pie menu.
The current background color and parent nodetrees is too distracting and noisy.
It drastically affect the readability of the nested node-trees.
Other techniques (better bread crumbs) can be used instead to indicate
to users that they are inside a node group.
---
The background drawing was introduced in 4638e5f99a as part of the
Python Nodes branch merge. This made its debut in Blender 2.67
(30/May/2021).
At the time the color used for the background was a light gray. Over the
years the color changed to the current dark green, aggravating the
problem further.
Before that, the (expanded) nodegroup already had the partially
transparent background, mingling with the other nodes. The Python Nodes
branch brought this concept with its changes, and would always draw up
to two levels up in the background (the parent nodetree, and its parent
nodetree).
To read the original inspiration for all the changes introduced then:
https://code.blender.org/2012/01/improving-node-group-interface-editing/
Differential Revision: https://developer.blender.org/D12780
Change the rules for determining where to save a new catalog definition
file (CDF).
Old situation (T91681): if a `blender_assets.cats.txt` file already
exists in the same directory as the blend file, write to that. If not,
see if the blend file is contained in an asset library, and write to its
top-level CDF.
The new situation swaps the rules: first see if the blend file is
contained in an asset library, and if so write to its top-level CDF. If
not, write a CDF next to the blend file.
As before, any pre-existing CDF is not just bluntly overwritten, but
merged with the in-memory catalogs.
sequencer_view_preview_poll returned true even when in the
"Sequence" view.
Now check the preview is visible, also check the region
is expected type so preview actions aren't possible for mixed
sequence/preview display.
The menu to select the active Asset Library is now in the left bar (so called
"Source List", although I'd prefer "Navigation-Bar").
This has some benefits:
* All Asset Library navigation is in the left sidebar now, giving nice grouping
and a top-to-bottom & left-to-right flow of the layout. The header is focused
on view set-up now.
* Catalogs are stored inside the asset library. Makes sense to have them right
under that.
* Less content in the header allows for less wide Asset Browsers without
extensive scrolling.
* This location gives more space to add options or operators for Asset
Libraries.
Main downside I see is that the side-bar needs to be opened to change
libraries, which takes quite some space. In practice there shouldn't be need to
do this often though.
This reworks how tree rows are constructed in the layout and how they
behave in return.
* To open or collapse a row, the triangle/chevron icon has to be clicked
now. The previous behavior of allowing to do it on the entire row, but
only if the item was active already, was just too unusual and felt
weird.
* Reduce margin between chevron icon and the row label.
* Indent child items without chevron some more, otherwise they feel like
a row on the same level as their parent, just without chevron.
* Fix renaming button taking entire row width. Respect indentation now.
* Fix double-clicking to rename toggling collapsed state on each click.
Some hacks/special-handling was needed so tree-rows always highlight
while the mouse is hovering them, even if the mouse is actually hovering
another button inside the row.
`SequencesMeta.new_movie()` API function caused meta strip to change
length. Similar issue has been fixed in transform code by checking
if `MetaStack` exists. `MetaStack` is not used when changing data in
python.
Provide `seqbase` to `SEQ_time_update_sequence()` so the function can
check if change happens inside of meta strip.
This patch also merges `seq_time_update_sequence_bounds()` into
`SEQ_time_update_sequence()`. This is because same issue applies for
both functions and it is confusing to have more time update
functions.re if this will lead anywhere.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D12763
Previously the storage here was optimized to avoid indirections in BVH2
traversal. This helps improve performance a bit, but makes performance
and memory usage of Embree and OptiX BVHs a bit worse also. It also adds
code complexity in other parts of the code.
Now decouple triangle and curve primitive storage from BVH2.
* Reduced peak memory usage on all devices
* Bit better performance for OptiX and Embree
* Bit worse performance for CUDA
* Simplified code:
** Intersection.prim/object now matches ShaderData.prim/object
** No more offset manipulation for mesh displacement before a BVH is built
** Remove primitive packing code and flags for Embree and OptiX
** Curve segments are now stored in a KernelCurve struct
* Also happens to fix a bug in baking with incorrect prim/object
Fixes T91968, T91770, T91902
Differential Revision: https://developer.blender.org/D12766
Was just comparing this item's and the parent item's names. But if an item has
no parents, only its own name has to match for the check to return true. Make
sure that the number of parents also matches.
MSVC does not support variable size array definition.
Use maximum possible stack, similar to the GPU case.
Not expected to have user-measurable difference.
Now the icons to add or delete catalogs are only shown when mouse hovering a
catalog item in the tree. This is convenient for quick creation of catalogs,
and doesn't require activating a catalog to edit it first.
Determining if a tree item is hovered isn't trivial actually. The UI tree-view
code has to find the matching tree-row button in the previous layout to do so,
since the new layout isn't calculated yet.
The UI code to ensure consistent button state over redraws was just comparing
the name of the item, ignoring the parent names. So with multiple items of the
same name, there might have been glitches (didn't see any myself though).
There's a leftover to-do though, we don't check yet if the matched buttons are
actually from the same tree. Added TODO comment.
Make volume stack allocated conditionally, potentially based on the
actual nested level of objects in the scene.
Currently the nested level is estimated by number of volume objects.
This is a non-expensive check which is probably enough in practice
to get almost perfect memory usage and performance.
The conditional allocation is a bit tricky.
For the CPU we declare and define maximum possible volume stack,
because there are only that many integrator states on the CPU.
On the GPU we declare outer SoA to have all volume stack elements,
but only allocate actually needed ones. The actually used volume
stack size is passed as a pre-processor, which seems to be easiest
and fastest for the GPU state copy.
There seems to be no speed regression in the demo files on RTX6000.
Note that scenes with high nested level of volume will now be slower
but correct.
Differential Revision: https://developer.blender.org/D12759
This ended up being a copy of:
`toolsettings->workspace_tool_type == SCE_WORKSPACE_TOOL_FALLBACK`
requiring boiler plate assignment in gizmos refresh callbacks.
Remove this struct member and check `toolsettings->workspace_tool_type`
directly, since so far there has been no advantage in gizmo-groups
being able to control this themselves.
Resolve regression in c9d9bfa84a,
which added support for tools to be tagged as using a fallback too.
In these cases the "Active Tool" setting was ignored and the fallback
tool would be used (the spin tool would box select for example).
Catalogs can now be renamed by double clicking them in the Asset
Browser. This is mostly done through the tree-view API, the asset
specific code is very little.
There is some polish left to be done here, e.g. the double click
currently also collapses/uncollapses and activates the clicked item. And
the rename button takes the full width of the row. But addressing these
is better done as part of some other behavioral changes that are planned
anyway.
It's unclear why this code was added in the first place, but it seems
unnecessary, it can be restored if we find this breaks something.
The Embree docs mention that the same primitive may be hit multiple times, but
my understanding is that about e.g. curves where both the frontside and backside
may be hit. However those hits would be at different distances.
The context for this change is that we want to add an optimization where we
can immediately update throughput for transparent shadows instead of recording
intersections, and avoid duplicate would require extra work. However there is
an Embree example that does something similar without worrying about duplicate
hits either.
Makes things look more appealing visually. Plus it's a way to visually
group the tree rows together, which can be important if there are more
widgets surrounding the tree.
Liboverride references need a special handling during append, since
those pointers should never be made local, nor reampped to newly
localized data. And liboverride references should never be directly made
local either, to ensure their liboverride usages remain pointing to
linked data and not local one.
Issue was reported by the studio, and also probably as part of T91892.
If a renaming button was removed via `UI_but_active_only_ex()` and that
button was placed using the layout system, the button was still in the
layout.
So far this didn't cause issues, because all cases where the button may
be removed were not using the layout system.
Fixes:{T91064}
Caused by {rBcd118c5581f482afc8554ff88b5b6f3b552b1682}
- Applies `ensure_valid_reflection()` to the normal input on all BSDFs for CPU and GPU.
- This doesn't affect hair.
- Removes `ensure_valid_reflection()` from the output of Bump Map and Normal Map nodes for CPU/GPU as it is not needed.
- The fix doesn't touch OSL.
Reviewed By: brecht, leesonw
Maniphest Tasks: T91064
Differential Revision: https://developer.blender.org/D12403
- Support toggle/deselect/deselect_all options
(matching 3D viewport object selection).
- Support legacy selection behavior.
- Support selecting by the center in preview views (holding Ctrl).
Re-order common sequencer key-map to be at the top level
(shared by preview and sequence view).
Without this sequencer tools would be displayed at different levels
in the hierarchy which is confusing and doesn't represent the separation
between "Sequencer" and "SequencerPreview" key-maps.
Sequencer poll was succeeding outside of a preview region.
This meant it couldn't be used in tool key maps which are currently
shared between preview & sequencer regions.
Free strip `anim` data immediately after rendering. This doesn't affect
rendering performance, because each new loop would have to seek to start
of strip. Also strips are now freed anyway, but after rendering loop
ends.
With SF edit file, thumbnail rendering used around 60GB of memory.
Now it uses few hundreds MB (depends on movie file resolution, codec,
etc.)
Freeing of strips caused UI to be unresponsive for brief period. This
issue is not removed, but is more spread out so it is less noticable.
This effectively undoes some of the following commit:
rB4537e8558468c71a03bf53f59c60f888b3412de2
The tables in question were duplicated 5-6 times into the blender
executable due to the headers being used in multiple translation units.
This contributes ~6.3kb worth of duplicate data into the binary.
Some further details are in the below revision.
Differential Revision: https://developer.blender.org/D12724
Some software may export velocity as a different type than 3D vectors
(e.g. as colors or flat arrays or floats), so we need to explicitely
check for this.
A more robust attribute handling system allowing us to cope with other
software idiosyncrasies is on the way, so this fix will do for now.
This didn't belong on blenlib since it uses DNA data types
and included a bad-level call to BKE_curve.h.
It also meant linking in blenlib would depend on the freetype library,
noticeable for thumbnail extraction (see D6408).
The long term goal is completely removing DerivedMesh, and these
functions are making some refactoring of mesh normals (T91186) more
complicated. They are not used anywhere.
Previously we would only free animation strip data when doing final
renders. If not doing a final render or simply just playing back videos
in the VSE, we would not free decoders or non VSE cache data from the
strips.
This would lead to memory usage exploding in complex VSE scenes.
Now we instead use the dumb apporach of freeing everything that is not
currently visible.
The Paint operator only works in SPACE_VIEW3D and this is checked in the poll mtehod, so it's not logic check again.
These checkings were part of the old grease pencil but it was not removed.
This is required for Cycles to report a meaningful error message when it fails to load a PTX module
created with a newer CUDA toolkit version than the driver supports.
Ref T91879
Implement an overscan support for tiles, so that adaptive sampling can
rely on the pixels neighbourhood.
Differential Revision: https://developer.blender.org/D12599
Issue was that the `on_activate()` callback of tree-items were
continuously called, because the active-state was queried before we
fully reconstructed the tree and its state from the previous redraw.
Such issues could happen in more places, so I've refactored the API a
bit to reflect the requirements for state queries, and include some
sanity checks.
The actual fix for the issue is to delay the state change until the tree
is fully reconstructed, by letting the tree-items pass a callback to
check if they should be active.
The `ui::BasicTreeViewItem` took a function-like object to execute on
item activation via the constructor. This was mainly intended to be used
with lambdas. However, it's confusing to just have this lambda there,
with no indication of what it's for (activation).
Instead, assign the function-like object via an explicit `on_activate()`
function.
Currently was only used for logging, but better to fix the size so
that it matches reality.
The issue was caused by decoupling number of shadow intersections
and using much higher number for CPU. This caused the total state
on GPU to be logged as 10s of gigabytes instead of 100s of megabytes.
Differential Revision: https://developer.blender.org/D12755
No functional change, just cleaning up the shader code a bit.
Part of this is removing dead code (the discard was never called), and
part is shuffling mix/max around based on feedback by Sybren Stüvel.
For example, crash when attempting to use OptiX denoiser on systems
without OptiX-capable device.
Perform check that scene update happened without errors.
Note that `et_error` makes progress to cancel, so the code was
simplified a bit.
This was simply never handled apparently.
Also fixes a regression from recent append refactor that prevented RB
objects to to properly handled too (since we instantiate loose objects
in append step now, we need to handle RigidBody ones after that
instantiation stage, otherwise nothing will happen since loose objects
won't be in any scene).
Issue is that test cases re-uses draw manager. The new
`DRWRegisteredDrawEngine` struct is only freed when a
valid opengl context was found. what isn't the case
when running test cases.
Also made sure that re-using draw manager would use re-inited
values.
This is a necessary step for EEVEE's new arch. This moves more data
to the draw manager. This makes it easier to have the render or draw
engines manage their own data.
This makes more sense and cleans-up what the GPUViewport holds
Also rewrites the Texture pool manager to be in C++.
This also move the DefaultFramebuffer/TextureList and the engine related
data to a new `DRWViewData` struct. This struct manages the per view
(as in stereo view) engine data.
There is a bit of cleanup in the way the draw manager is setup.
We now use a temporary DRWData instead of creating a dummy viewport.
Development: fclem, jbakker
Differential Revision: https://developer.blender.org/D11966
This adds an offscreen View3D window area for the VR view in order to
execute XR events/operators in the proper context. The area is created
as runtime data before XR events are dispatched and set as the active
area during XR event handling.
Since the area is runtime-only, it will not be saved in files and since
the area is offscreen, it will not interfere with regular window areas.
The area is removed with the rest of the XR runtime data on exit, file
read, or when stopping the VR session.
Note: This also adds internal types (EVT_DATA_XR, EVT_XR_ACTION) and
structs (wmXrActionData) for XR events.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D12472
Rename the "String Join" node to "Join Strings" to
go with the verb first naming convention.
Differential Revision: https://developer.blender.org/D12678
Following operators now only report messages back when they are called via their invoke-methods:
- ANIM_OT_keyframe_insert
- ANIM_OT_keyframe_insert_by_name
- ANIM_OT_keyframe_insert_menu
- ANIM_OT_keyframe_delete
- ANIM_OT_keyframe_clear_v3d
- ANIM_OT_keyframe_delete_v3d
Also removed the attribute confirm_success from the following operators:
- ANIM_OT_keyframe_insert
- ANIM_OT_keyframe_insert_by_name
- ANIM_OT_keyframe_insert_menu
- ANIM_OT_keyframe_delete
- ANIM_OT_keyframe_delete_by_name
Note: addons/scripts possibly need to be updated if they use the above operators AND set the "confirm_success" attribute
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12697
The asset catalog design was always that the active catalog would also
display all assets of its child catalogs (or grand-childs, etc.). This
is one of the main characteristics that differentiates catalogs from
usual directories.
Sybren prepared this on the asset catalog backend side with
56ce51d1f7. This integrates it into the Asset Browser backend and the
UI.
Fix the selection logic on the Handle Type Selection node to work
as intended:
(Left is Selected AND Left is ChosenType)
OR
(Right is Selected AND Right is ChosenType)
This update allows the Trim Curve node to use float field inputs
for the start and end inputs. These fields are evaluated on the
spline domain.
Differential Revision: https://developer.blender.org/D12744
Makes sure that the active item of a tree never has collapsed parent
items, which can be confusing if it happens. E.g. for the asset catalogs
UI, the active catalog decides which assets are visible. Having it
hidden while being the main factor deciding which assets are visible is
quite confusing.
I think it makes sense to have this at the UI Tree-View level, rather
than doing it manually in the asset catalog code for example. Seems like
something you'd commonly want. We can make it optional in the API if
needed.
Renamed the `set_active()` function to make clear that it is more than a
mere setter.
See T91826, there is a bug in the code where both `.` and `_` are used as a seperator for `BLI_uniquename_cb`.
This resulted in some nodes becoming disconnected on file load.
Until this is resolved, the chnages are reverted to prevent data loss.
Dragging assets onto the "Unassigned" catalog tree item will effectively
move the assets out of any catalog. Technically this means unsetting the
Catalog-ID stored in the asset metadata, or more precisely setting the
UUID to be all zeros.
Introduced by fc7beac8d6. During code review it wasn't clear why this
branch was needed, so we removed it. Now it is clear why it is needed
so we added it back and added a comment why the branch is needed.
Patch provided by @Severin.
Always sample background pass behind shadow catcher (if the pass
exists, of course), regardless of whether shadow catcher will be
used as approximate or accurate.
Allows to combine accurate shadows into an environment map.
Differential Revision: https://developer.blender.org/D12747
{F10761402}
With active viewport render from camera view, the camera border shows up, even when passepartout and overlays are disabled.
By moving the line-drawing code to the passepartout section, it is effectively disabled when passepartout is off.
Reviewed By: sebastian_k
Differential Revision: https://developer.blender.org/D12745
Because of legacy reasons (C string compare function returning 0 when
strings are equal), the ghash compare function is expected to return
false when hashes are equal.
This patch fixes a crash that was recently introduced by rB5cebcb415e76.
The reason were missing poll functions in the UI and operator.
Reviewed By: ISS
Maniphest Tasks: T91873
Differential Revision: https://developer.blender.org/D12736
Without this, each cppcheck invocation included all defines/includes
flooding the console with unhelpful information.
Also remove nonexistent directory to exclude.
queue_processes() - used for some of the "make check_*" utilities,
wasn't waiting for all jobs to finish before returning.
This conflicted with running cleanup operations.
Somehow, the file from T71329 has an empty curve profile. While that may
be a problem in itself, it's reasonable to avoid asserts or crashes when
loading or drawing such a CurveProfile. This commit just makes sure the
table always has a single vertex, and adds some checks in drawing code.
With this it is possible to select any number of assets in the Asset
Browser and drag them into catalogs. The assets will be moved to that
catalog then. However, this will only work in the "Current File" asset
library, since that is the only library that allows changing assets,
which is what's done here.
While dragging assets over the tree row, a tooltip is shown explaining
what's going to happen.
In preparation to this, the new UI tree-view API was already extended
with custom drop support, see 4ee2d9df42.
----
Changes here to the `wmDrag` code were needed to support dragging multiple
assets. Some of it is considered temporary because a) a proper #AssetHandle
design should replace some ugly parts of this patch and b) the multi-item
support in `wmDrag` isn't that great yet. The entire API will have to be
written anyway (see D4071).
Maniphest Tasks: T91573
Differential Revision: https://developer.blender.org/D12713
Reviewed by: Sybren Stüvel
This node creates a boolean field selection of bezier spline points
that have a handle of the given type on the selected 'side' of the
contol point. This is evaluated on the point domain.
Differential Revision: https://developer.blender.org/D12559
A previous commit, c56526d8b6, which sometimes didn't drop offsets
into 'in plane' faces, as a fix to T71329, was overly aggressive.
If all the intermediate edges are in the same plane then it is fine
to just put the meeting point on the plane of the start and end edges.
This is very similar to rBa812fe8ceb75fd2b.
This time the number of symbols decreases further from 1335 to 928.
Compile time of the distribute node decreases from ~2.4s to ~2.3s.
The new socket declaration api generates a surprising amount
of symbols in each translation unit where it is used. This resulted
in a measurable compile time increase.
This commit reduces the number of symbols that are generated in
each translation unit significantly. For example, in
`node_geo_distribute_points_on_faces.cc` the number of symbols
decreased from 1930 to 1335. In my tests, this results in a 5-20%
compile time speedup when this and similar files are compiled
in isolation (measured by executing the command in `compile_commands.json`).
Compiling the distribute points on faces node sped up from ~2.65s to ~2.4s.
This update of the Points to Volume node allows a field to populate the
radius input of the node and removes the implicit realization of
instances.
Differential Revision: https://developer.blender.org/D12531
This update of the Resample Curve node allows a field to populate the
count or length input of the node depending on the current mode. The
field is evaluated on the spline domain.
Differential Revision: https://developer.blender.org/D12735
I've seen requests to remove this or complaints about this error message
quite frequently. In lots of production files it's just always going off.
It's not an actionable warning, and since "slow" is relative, it isn't
always even correct.
Differential Revision: https://developer.blender.org/D12694
This commit introduces the Rotate Euler function node which modifies
an input euler rotation. The node replaces the "Point Rotate" node.
Addresses T91375.
Differential Revision: https://developer.blender.org/D12531
This update of the Switch node allows for field compatible types
to be switched through the node. This includes the following:
Float, Int, Bool, String, Vector, and Color
The remaining types are processed with the orginal code:
Geometry, Object, Collection, Texture, and Material
Because the old types require a diffent "switch" socket than the
field types, versioning for old files is included to move links
of those types to a new switch socket. Once fields of other types
are supported, this node can be updated to support them as well.
Differential Revision: https://developer.blender.org/D12642
This commit extends the 'Cone' and 'Cylinder' mesh primitive nodes,
with two inputs to control the segments along the side and in the fill.
This makes the nodes more flexible and brings them more in line with
the improved cube node.
Differential Revision: https://developer.blender.org/D12463
This update of the Set Handle Type node allows for a bool field to be
used as the selection of the affected control point handles for
bezier splines. If no bezier splines are provided a info message is
shown.
Differential Revision: https://developer.blender.org/D12526
This update of the Set Spline Type node allows for a bool field to be
used as the selection of the affected splines.
Differential Revision: https://developer.blender.org/D12522
The Spline Length Input node provides a field containing the
length of the current evaluated spline to the Point and Spline
domains.
Differential Revision: https://developer.blender.org/D12706
Add read-only access to the active catalog ID via
`context.space_data.params.catalog_id` in the Asset Browser context.
The UUID is exposed as string to Python.
The curve subdivide node can now take an int field to specify the
number of subdivisions to make at each curve segment.
Reviewed by: Hans Goudey
Differential Revision: https://developer.blender.org/D12534
Enable sorting motion tracking tracks by start / end times.
Help identifying what cases reconstructed camera jumps, based
on information about whether any track starts/ends at the frame.
Based on revision eb0eb54d96.
{F10563305}
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D12621
Always create an `AssetCatalogTree` in the `AssetCatalogService`. This
ensures that newly-created catalogs are immediately visible in the UI
(because they insert themselves into an already-existing tree).
Given an "active catalog" (i.e. the one selected in the UI), construct
an `AssetCatalogFilter` instance. This filter can determine whether an
asset should be shown or not. It returns `true` when The asset's catalog
ID is:
- the active catalog,
- an alias of the active catalog (so different UUID that maps to the
same path),
- a sub-catalog of the active catalog.
Not yet hooked up to the UI.
The use case for this method is quite obscure and difficult to
understand without an example. Despite how big looks, this is
actually the simplest example that makes sense.
This fixes T91828.
The current value of `GL_PACK_ALIGNMENT` may result in crash in the `gpu` module if the buffer is not aligned.
Differential Revision: https://developer.blender.org/D12720
Copy/Paste uses its own code path for ID linking, which was not setting
`LIB_TAG_DOIT` for proper instantiation later on.
Would be nice the make this logic closer to the rest of the link/append
code at some point, but for now this fix will do.
No idea why this was done that way (it originate from initial paste
commit, rB12b642062c6f).
But the IDs 'selected' as direct paste in `BLO_library_link_copypaste`
should be 'directly' linked, it's similar case to actual append of
selected IDs by the user.
Related to T87189.
This refactors and fixes the code that propagates socket types
through reroute nodes. In my tests it is faster than the previous
code. The difference becomes larger the more reroute nodes
there are, because the old code had O(n^2) runtime, while the
new code runs in linear time.
Differential Revision: https://developer.blender.org/D12716
Add asset catalogs test, to ensure missing catalogs are only created once,
and not for every originally defined catalog.
No functional changes to Blender (the code was already doing the right
thing).
The node was setting a warning when used with instances on input,
even though it worked fine.
Differential Revision: https://developer.blender.org/D12718
Alpha input was not receiving the final composite canvas
as preferred causing a Translate operation being inserted
for centering. This resulted in a transparent background.
The issue only affects Full Frame mode.
This patch is created to change the tooltip for Slip Strip Contents
As per the present info, only active strip will be affected.
But in reality selected strips can be trimmed with this operator.
Word Trim changed to Slip in tooltip
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12450
Add Offset/Slope/Power controls to the color balance modifier. This is
already available in compositor.
Reviewed By: sergey, ISS
Differential Revision: https://developer.blender.org/D12575
* Add OutputDriver, replacing function callbacks in Session.
* Add PathTraceTile, replacing tile access methods in Session.
* Add more detailed comments about how this driver should be implemented.
* Add OIIOOutputDriver for Cycles standalone to output an image.
Differential Revision: https://developer.blender.org/D12627
* Split GPUDisplay into two classes. PathTraceDisplay to implement the Cycles side,
and DisplayDriver to implement the host application side. The DisplayDriver is now
a fully abstract base class, embedded in the PathTraceDisplay.
* Move copy_pixels_to_texture implementation out of the host side into the Cycles side,
since it can be implemented in terms of the texture buffer mapping.
* Move definition of DeviceGraphicsInteropDestination into display driver header, so
that we do not need to expose private device headers in the public API.
* Add more detailed comments about how the DisplayDriver should be implemented.
The "driver" terminology might not be obvious, but is also used in other renderers.
Differential Revision: https://developer.blender.org/D12626
`BKE_mesh_boundbox_get` cannot be called for objects of type Curve.
The BoundBox however does not match the object seen in the scene.
This will be dealt with in another commit.
For every known catalog, ensure its parent catalog also exists. This
ensures that assets can be assigned to parent catalogs, even when they
didn't exist in the Catalog Definition File yet.
Would happen when there were multiple drag items in parallel. There was
a listbase constructed with twice the same item, even though that item
would be deleted after it was handled the first time.
Adds an easy way to add drop support for tree-view rows.
Most of the work is handled by the tree-view UI code. The tree items can
simply override a few functions (`can_drop()`, `on_drop()`,
`drop_tooltip()`) to implement their custom drop behavior.
While dragging over a tree-view item that can be dropped into/onto, the
item can show a custom and dynamic tooltip explaining what's gonna
happen on drop.
This isn't used yet, but will soon be for asset catalogs.
See documentation here:
https://wiki.blender.org/wiki/Source/Interface/Views#Further_Customizations
The `CatalogPath` name was an alias for `std::string`, so that it could
be easily switched over to something else. This happened in the previous
commit (switched to `AssetCatalogPath`), so the alias is no longer
necessary.
This commit removes the `CatalogPath` alias.
No functional changes.
So far we have used `std::string` for asset catalog paths. Some
operations are better described on a dedicated class for this, though.
This commits switches catalog paths from using `std::string` to a
dedicated `blender::bke::AssetCatalogPath` class.
The `using CatalogPath = AssetCatalogPath` alias is still there, and
will be removed in a following cleanup commit.
New `AssetCatalogPath` code reviewed by @severin in D12710.
Patch created by Pablo Vazquez
This change darkens the header area a bit to create more contrast with the texts.
Differential Revision: https://developer.blender.org/D12711
Handling of RigidBody data in duplicate of scenes/collections was very
wrong. This commit:
- Add handling of duplication of RB collections when fully duplicating
a scene.
- Fix Object duplication trying to add duplicated RB objects to
matching RBW collections.
While the later behavior is desired when only duplicated objects, when
duplicating their collections and/or scenes it is actually very bad, as
it would add back new object duplicates to old (RBW) collections.
If the "Current File" asset library is selected in the Asset Browser,
now asssets are filtered based on the active asset catalog. Previously
it would just show all assets. This was marked as a TODO in the code
already.
Maniphest Task: https://developer.blender.org/T91820
Passing multiple UDIM arguments into the packing function
is awkward especially since the caller may not be using UDIM.
Use an argument to store UDIM packing parameters which can be NULL,
which operates without any UDIM support.
Add a function that extracts these parameters out of the image space
allowing for multiple functions to take UDIM parameters in the future.
This is caused by line art loading curve objects twice from curve and converted mesh instances (when instance option is on). Now only load mesh when instance option is on.
This patch increases the size of the Area BORDERPADDING a bit to make
it easier to hit the edges when initiating area resizing.
See D11925 for details and examples.
Differential Revision: https://developer.blender.org/D11925
Reviewed by Campbell Barton
This commit exposes left and right bezier handles as an attribute.
Interaction basically works like edit mode. If you move an aligned
handle, it also moves the opposite handle of the control point.
The difference is that you can't edit "Auto" or "Vector" handles,
you have to first use the "Set Handle Type" node. That gives the handle
types a bit more meaning in the node tree-- changing them in edit mod
is more like a "UI override".
The attributes are named `handle_start` and `handle_end`,
which is the same name used in the curve RNA API.
A new virtual array implementation is added which handles the case of
splines that don't have these attributes, and it also calls two new
functions on `BezierSpline` to set the handle position accounting
for aligned handles.
The virtual arrays and attribute providers will be refactored
(probably templated) in the future, as a next step after the last
built-in curve attribute provider has landed.
Differential Revision: https://developer.blender.org/D12005
Without proper RNA paths, Alt-click editing properties on multiple
selected objects doesn not work (as well as the 'Copy To Selected'
operator).
Fixes T91806.
Maniphest Tasks: T91806
Differential Revision: https://developer.blender.org/D12700
This diff disables tests for Boolean, subdivision surface and volume
when GMP, Opensubdiv and Openvdb are not compiled respectively.
It also changes the existing file structure and adds sub-folders for
boolean and subdivison tests. The volume folder only has one test and
is as unchanged structure-wise.
Reviewed By: JacquesLucke, LazyDodo
Differential Revision: https://developer.blender.org/D12448
Similar to the previous change in the area: need to avoid ray
point and direction becoming a non-finite value.
Use the view direction when the geometrical normal can not be
calculated.
Collaboration and sanity inspiration with Brecht!
Differential Revision: https://developer.blender.org/D12703
This makes asset view templates, e.g. as used by the Pose Library add-on
use recursive asset loading, see
Also works around an issue that made assets not show up at all anymore
since fc7beac8d6. I'm creating a separate report for that regression,
but in the Asset Browser and Viewer it shouldn't be apparent currently.
Was using `NAME_MAX` which is defined in `limits.h`, which again may be
implicitly included by the compiler. Intend was to use the Blender
define `MAX_NAME`.
The Asset Browser now displays a tree with asset catalogs in the left
sidebar.
This replaces the asset categories. It uses the new UI tree-view API
(https://wiki.blender.org/wiki/Source/Interface/Views#Tree-View).
Buttons are displayed for adding and removing of catalogs. Parent items
can be collapsed, but the collapsed/uncollapsed state is not stored in
files yet.
Note that edits to catalogs (e.g. new or removed catalogs) are only
written to the asset library's catalog definition files when saving a
.blend.
In the "Current File" asset library, we try to show asset catalogs from
a parent asset library, or if that fails, from the directory the file is
stored in. See adaf4f56e1.
There are plenty of TODOs and smaller glitches to be fixed still. Plus a
UI polishing pass should be done.
Important missing UI features:
* Dragging assets into catalogs (WIP, close to being ready).
* Renaming catalogs
* Proper handling of catalogs in the "Current File" asset library
(currently not working well).
The "Current File" asset library is especially limited still. Since this
is the only place where you can assign assets to a catalog, this makes
the catalogs very cumbersome in general. To assign an asset to a
catalog, one has to manually copy the Catalog ID (a random hash like
number) to the asset metadata through a temporary UI in the Asset
Browser Sidebar. These limitations should be addressed over the next few
days, they are high priority.
Differential Revision: https://developer.blender.org/D12670
Link/append code needs proper access to scene/view3d data to handle
collections/objects instantiation.
Note that this is a temporary hack more than a proper fix, which would require
a deeper redesign of drag&drop code.
Also note that this will not handle 'properly' (i.e. as user would
expect it) cases like implicitely appended parent objects, in that only
the explicitely appended object will be dropped to the nes location, the
others will remain at their original coordinates.
Differential Revision: https://developer.blender.org/D12696
The issue was caused by hair shader setup setting normal to a non
finite value, which then gets used to create a ray with non-finite
direction, making BVH traversal to run out of stack memory.
Happens with 150_0040_A.lighting.blend frame 112 of the Sprites
project.
Differential Revision: https://developer.blender.org/D12692
Introduce a new keymap preference to navigate into folders by clicking on them once instead of twice.
Makes browsing folders faster albeit non-standard, so keeping this off by default for now.
Does not affect Industry Compatible or other keymaps.
It is still the possible to right-click to open context menu, hold Ctrl or Shift to select multiple items:
{F10651030, size=full}
----
Keymap preference:
{F10652759, size=full}
Part of T91537
Reviewed By: fsiddi, campbellbarton
Differential Revision: https://developer.blender.org/D12667
Caused by {rB3e5431fdf439}
Issue is that sculpting could start with using `SCULPT_smooth` and
(because of the Pressure sensitivity dropping to zero) code would switch
to `SCULPT_enhance_details_brush` at strength zero.
Issue with this though is that this can be in the middle or end of a
stroke and the necessary `ss->cache->detail_directions` are only
initialized for the first brush step (see
`SCULPT_stroke_is_first_brush_step` in `SCULPT_enhance_details_brush`).
With these missing, it could only go downhill from there.
Suggest to prevent the "mode-flip" from `SCULPT_smooth` to
`SCULPT_enhance_details_brush` (happening solely because of pressure
strength) by changing the condition.
Now do `SCULPT_enhance_details_brush` only if strength is **below** zero
and `SCULPT_smooth` else (flipping from enhance_details to regular smooth
is fine).
If inverting the brush in the middle of the stroke will be supported at
some point, the codepath of `smooth` would have to inform the cache that
invert changed and detail_directions would have to be initialized then
(even if not at the start of the stroke).
Maniphest Tasks: T89164
Differential Revision: https://developer.blender.org/D12676
Texts in Outliner dont activate on selecting (Text Editor did not change
to selected text) which is a bit inconsistent to other ID types.
ref T90862
Maniphest Tasks: T90862
Differential Revision: https://developer.blender.org/D12412
With 794c2828af & f48a4aa0f9 it's possible to reuse possibly
expensive, nested data of a data-block when appending. E.g. the
texture of a material, or the mesh of an object. Without this it's easy
to bloat memory and the file size. Duplicated textures also cause
unnecessary shader recompilations.
The feature was intended to be the new default behavior for the Asset
Browser, but it wasn't actually added to the UI yet. This patch adds a
new import type option to the Asset Browser. So from the menu in the
header, you can now choose between:
* Link
* Append
* Append (Reuse Data)
The latter is the new default.
Maniphest Task: https://developer.blender.org/T91741
Differential Revision: https://developer.blender.org/D12647
Reviewed by: Sybren Stüvel, Bastien Montagne
This patch adds color tags to VSE strips, an overlay option to toggle the colors
on and off, a section in the theme settings to define the 9 possible colors and
two ways of changing the color tag through the UI. You can change the color
through the right-click context menu, or in the strip side panel next to the
strip name.
Color tags are defined in user preferences and they can be disabled in overlay
settings.
Reviewed By: campbellbarton, ISS
Differential Revision: https://developer.blender.org/D12405
Avoids possible numerical issues in the path tracing kernel, which
is most important for displacement as non-finite values in BVH can
lead to infinite node recursion during traversal.
Differential Revision: https://developer.blender.org/D12690
Noticed while looking into flickering issues in viewport.
Doesn't seem to solve the flicker issue for me, but is something
what is supposed to be happening anyway.
Differential Revision: https://developer.blender.org/D12673
When the Asset Browser shows the "Current File" asset library, now it
also attempts to load an asset catalog definition file from location of
the current .blend file. This happens as follows:
* First, see if the file is inside of an asset library that is "mounted" in the
Preferences. Load the catalogs from there if so.
* Otherwise, if the file is saved, load the catalogs from the directory the
file is saved in.
* If the file is not saved, no catalogs will be loaded.
Unit tests are being worked on in D12689.
Creating catalogs from the "Current File" asset library still doesn't work, as
the asset catalog service doesn't construct an in-memory catalog definition
file in that case yet.
Differential Revision: https://developer.blender.org/D12675
The issues:
1.) When we want to remove keyframes from a range of frames in an
action,
then we can use bpy.ops.anim.keyframe_delete_v3d to remove the keys
frame by frame. However, whenever the operator hits a frame with no
keyframes, then it generates an error. While when it hits a frame
with keyframes, then it reports the numbner of removed keys.
This creates a lot of unnecessary noise in the Blender console.
2.) Furthermore a related issue is that WM_event_add_notifier() is
called also when no frames where removed. This seems to significantly
slow down the removal of keyframes in a range of frames at least
when i use vscode for debugging.
A proposal for improvement:
This patch adds an attribute 'confirm_success' which controls
if the operator reports back what it did (or did not) while
executing. Silent mode would then be called like this:
bpy.ops.anim.keyframe_delete_v3d(confirm_success=False)
Note: confirm_success is True by default so this patchj does not
change the behavior of Blender, it only gives the option to scripts.
3.) Personal note:
I have chosen the attribute name to be equal as it is used
in other related operators. However i rather would rename the
attribute to "verbose" (preferred) or "with_confirm". But i let this
to be decided by the reviewers. Thanks for your time to review!
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12629
Swap the tool-header and header order so the tool-header
so the header is always next to the window edge.
Note that files saved in 3.0 will have overlapping headers when opened
in any version of Blender before this commit.
Reviewed By: Severin, fsiddi
Maniphest Tasks: T91536
Ref D12631
The issue was that the `GeometrySet` that comes from the modifier does
not have full ownership of the mesh for legacy reasons to avoid copies.
Calling `ensure_owns_direct_data` makes sure that the geometry set
actually owns the geometry so that it can be instanced.
For consistency with other nodes, we also want to process
all instances in the Points input independently. This allows
for more efficient instancing of many objects but also leads
to nested instancing. All instances are processed in their
local space, so that instances don't have to be realized.
Differential Revision: https://developer.blender.org/D12660
Some cases were not covered by the original doversion in
4a0ddeb62b. For now we make it always change the wire color regardless
of whether it was changed before or not.
This do a subversion bump.
Implements T78397
Extends the functionality of pack islands operator to allow packing UVs
to either the closest or active UDIM tile.
This provides 2 new options for packing UVs :
* Closest UDIM: Selected UVs will be packed to the UDIM tile they were
placed on. If not present on a valid UDIM tile, the UVs will be packed
to the closest UDIM in UV space
* Active UDIM: Selected UVs will be packed to the active UDIM image tile
In case, no image is present in the UV editor, then UVs will be packed
to the tile on the UDIM grid where the 2D cursor is located.
Reviewed By: campbellbarton
Maniphest Tasks: T78397
Ref D12680
Implements T89789, T89792, custom grid (described as dynamic grid in
T78389) and UV grid snapping (T78391)
Replaces the default UV editor grid with 2 new types of grid :
* Custom grid: Allows the user to create an NxN grid, where the value
of N is specified by the user.
* Subdividing grid: Subdivides the UV editor grid when the user
zooms in the viewport and vice versa when zooming out.
UV snapping improvements :
* Increment snapping: Increment values for snapping are calculated based
on which grid type is being used in the UV editor
(subdividing or custom). In general the increment value is equal to
the distance between 2 visible grid lines.
* Absolute grid snap: New toggle added to increment snapping option in
the UV editor, allows UV grid snapping during translation.
Reviewed By: campbellbarton
Ref D12684
This was reported for the Outliner.
It was possible to set 'show_locked_time' on any space (via python, not
sure if there are other ways to achieve this).
Navigating in an animation editor obviously ruined the layout in certain
Editors that are not made for this.
Now restrict syncing to editors that support it well (the ones that have
this setting exposed in their menus) and prevent setting this in RNA.
Maniphest Tasks: T91237
Differential Revision: https://developer.blender.org/D12512
- Instead of making the enum expanded leave it in menu form.
- Use full words instead of letters.
Differential Revision: https://developer.blender.org/D12686
Add a fields-aware implementation of the attribute proximity node.
The Source position is an implicit position field, but can be
connected with a position input node with alterations before use.
The target input and mode function the same as the original node.
Patch by Johnny Matthews with edits from Hans Goudey (@HooglyBoogly).
Differential Revision: https://developer.blender.org/D12635
This commit adds functionality for operations that require pixel
translation or resizing on "Full Frame" mode, allowing to adjust
their canvas. It fixes most cropping issues in translate, scale,
rotate and transform nodes by adjusting their canvas to the result,
instead of the input canvas.
Operations output buffer is still always on (0,0) position for
easier image algorithm implementation, even when the
canvas is not.
Current limitations (will be addressed on bcon2):
- Displayed translation in Viewer node is limited to 6000px.
- When scaling up the canvas size is limited to the
scene resolution size x 1.5 . From that point it crops.
If none of these limitations are hit, the Viewer node displays
the full input with any translation.
Differential Revision: https://developer.blender.org/D12466
This is a code refactor in preparation of supporting canvas
compositing. See {D12466}.
No functional changes, all canvases are at (0,0) position matching
tiled implementation.
Differential Revision: https://developer.blender.org/D12465
Sometimes the `use_partial_connect` option could trigger the assert:
```
BLI_assert(!BM_elem_flag_test(l_iter->v, VERT_NOT_IN_STACK));
```
This can happen when `v_delimit->e` is not part of edgenet, so `v_other` will not have the flag.
- Many cleanups of to use list base
- Some variable changes
These change is needed to migrate to the new socket builder API
Reviewed By: manzanilla
Differential Revision: https://developer.blender.org/D12366
The updated version has a selection input as a field
and does not realize instances implicitly.
Differential Revision: https://developer.blender.org/D12506
This enables fields as the official workflow for geometry nodes.
While many features are converted to use fields rather than the old
attribute workflow, many are not yet converted. In that case, the
unconverted nodes are still accessible with an experimental option.
In the coming weeks the rest of the nodes will be converted.
Differential Revision: https://developer.blender.org/D12672
Though the factor isn't so useful to adjust by itself, and is mostly
useful when used with a field connected, the slider from 0 to 1 can
help to make it clear that it's just used as a multiplier for the max
density after distribution.
Differential Revision: https://developer.blender.org/D12654
Because of a bug in VS2017 codecvt is replaced with Blender
BLI functions to convert from UTF8 to UTF32.
Differential Revision: https://developer.blender.org/D12655
NOTE: this feature is not ready for user testing, and not yet enabled in daily
builds. It is being merged now for easier collaboration on development.
HIP is a heterogenous compute interface allowing C++ code to be executed on
GPUs similar to CUDA. It is intended to bring back AMD GPU rendering support
on Windows and Linux.
https://github.com/ROCm-Developer-Tools/HIP.
As of the time of writing, it should compile and run on Linux with existing
HIP compilers and driver runtimes. Publicly available compilers and drivers
for Windows will come later.
See task T91571 for more details on the current status and work remaining
to be done.
Credits:
Sayak Biswas (AMD)
Arya Rafii (AMD)
Brian Savery (AMD)
Differential Revision: https://developer.blender.org/D12578
This commit adds nodes to do direct conversion between meshes and point
clouds in geometry nodes. The conversion from mesh to points is helpful
to instance once per face, or once per edge, which was previously only
possibly with ugly work-arounds. Fields can be evaluated on the mesh
to pass them to the points with the attribute capture node.
The other conversion, point cloud to mesh vertices, is a bit less
obvious, though it is still a common request from users. It's helpful
for flexibility when passing data around, better visualization in the
viewport (and in the future, cycles), and the simplicity of points.
This is a step towards T91754, where point clouds are currently
combined with meshes when outputing to the next modifier after geometry
nodes. Since we're removing the implicit behavior for realizing
instances, it feels natural to use an explicit node to convert points
to vertices too.
Differential Revision: https://developer.blender.org/D12657
Change the toggle to switch between an attribute and a single value to
only display for inputs that are fields, as determined statically by
the field inferencing added in rB61f3d4eb7c7db7. This means the field
inferencing must be calculated on file load, since it's used in the UI.
Differential Revision: https://developer.blender.org/D12623
As described in T91672, often it can be much more efficient to run each
node only on the unique geometry of the instances, rather than realizing
all instances and potentially processing redundant data. Sometimes the
performance difference can be completely smooth vs. completely unusable.
Geometry nodes used to hide that choice from users by always realizing
instances, but recently we have decided to expose it. So this commit
makes nodes run once per unique reference in the entire tree of nested
instances in their input geometries, continuing the work started in
rB0559971ab377 and rBf94164d89629f0d2. For the old behavior, a realize
instances node can be added before the nodes, which is done in the
versioning code.
Differential Revision: https://developer.blender.org/D12656
This should not be allowed in general, added some initial call to check
when user is allowed to delete a data to search for mandatory override
usages...
- Curve to Points: Needs output sockets
- Curve Endpoitns: Needs the same output sockets
- Edge Split: Should have a selection input instead
- Subdivision Surface: Should not use "crease" implicitly
All new versions of these nodes should also not implicitly
realize instances.
Since we bumped the number of channels to 128, I forgot to doversion the
editors. So new files (new editors) would have this right, but not
existing files.
Fixup to: 8fecc2a852
Own mistake when making NLA overridable, instead of assuming things
about the ID owner of the animation data being processed, properly
return and use the one found by `ED_actedit_animdata_from_context`.
Particle copying code was already properly sharing pointcache between
orig data and its copy only when `LIB_ID_COPY_SET_COPIED_ON_WRITE` is
set, do the same for the other point cache users.
Using `LIB_ID_CREATE_NO_MAIN` here is waaaaaaay to much wide scope for
such a dangerous/advanced behavior, that kind of things has to be
strictly restricted in scope.
Remove `AssetCatalogService::write_to_disk()` function. It has been
superseded by `write_to_disk_on_blendfile_save()`; the handful of test
functions that called the old function have been adjusted to use the
new one.
No functional changes to Blender itself.
This change fixes an issue when scene has a shadow catcher and film is
configured to be transparent. Starting viewport render and making the
background non-transparent will cause bad memory access (wrong render
and possibly crash).
Film passes depends on transparency of background, so check for this.
Demo file: F10650585
Differential Revision: https://developer.blender.org/D12666
Only do denoising on the full-frame result. Saves render time.
Can re-consider in the future when/if we'll want to support
denoising during rendering (similar to viewport) to allow artists
to stop rendering when they see image to be good enough. Until
there is a design for that workflow stick to a more time efficient
rendering.
Differential Revision: https://developer.blender.org/D12662
Use dashes to represent the function flow (while keeping continuous
lines for the data-flow).
It is important to tell both flows apart (the data and the function
flow). The sockets help with that, the noodles help this further.
The "data flow" is evaluated at every single node. A user can inspect
the output sockets of those nodes and have a glimpse at their values.
The "function flow" (nodes) however is only evaluated in the geometry
nodes. The noodles are not transporting data in the same sense of the
"data flow". All that can be inspected are the attributes the functions
depend on.
Having this clearly communicated should help users to inspect the
nodetrees, read and understand the different flows in the same tree.
---
Known limitations:
At the moment the dash lines are not equidistant:
* It would be nice to get the "uv.x" to be resampled for the bezier curve
so the dashes are equally distributed in the curve.
* Using distance between the P3 and P0 instead of the real bezier curve
length seems to be fine.
---
Full disclaimer:
Changes with that much of a visual impact tend to be controversial. So
far the main feedback is that dashed lines can be associated to broken
link, and that there are better ways to represent the flows (or
different information that should be visually represented).
I'm fully aware of that. However dashed lines are already used in the
viewport and outliner to indicate (hierarchical) relation. Besides,
other approaches (double-lines, having the data flow to be more
distinct, ...) didn't pan out in the end (or didn't look as good as
this).
---
Impact in other editors:
The compositor uses mostly a "data flow" nodetree, so no change is
expected there.
The shader nodetree is one that could but doesn't have to change its
visual language.
The shader nodetree uses mostly "function flow" with some "data flow" nodes.
One can argue that it should be adapted to follow the
same pattern as geometry nodes (with the new noodles and the diamond
sockets). Oh the other hand, a shader nodetree has a single context.
When a node depends on the "UV", there is only one UV at a time for the
entire nodetree. So it can also be treated as a psedo "data flow"
nodetree if we want to avoid too many changes in other parts of Blender.
Differential Revision: https://developer.blender.org/D12602
Add `AssetCatalogService::update_catalog_path()` to change the catalog
path of the given catalog, and also change the path of all the catalogs
contained within the given catalog.
Rebuilds the tree structure for the UI, but does not save the new catalog
definitions to disk.
No user-facing changes, just backend preparation for UI work.
NLA and Dope Sheet use a specific transform operation to scale.
Unlike the conventional resize operation, `TIME_SCALE` operates on `td->val`.
This is a bit outside the convention of transform operators.
The expected thing in this case would be to work in `td->loc` and use the conventional resize operator.
But for now, to fix the problem, use `td->loc` in the `TIME_SCALE` operation.
This commit also brings a cleanup in the style of some comments and removing unnecessary `memset`.
The Clear Asset operator (`ASSET_OT_clear`) now clears the Fake User.
This makes it symmetrical with the Mark Asset (`ASSET_OT_mark`)
operator, which sets Fake User to ensure assets are always saved to
disk.
Clear Asset now also has a `set_fake_user` boolean option, which allows
users to Clear Asset and set Fake User in one go.
The asset browser now shows these options in the context menu:
- Clear Asset: also clears Fake User. This makes it possible to actually
remove assets from the blend file without leaving the Asset Browser.
- Clear Asset (Set Fake User): keeps the Fake User bit set. This makes
it possible to "hide" the asset from the asset browser, without
loosing the actual data.
Internally, the `ED_asset_clear_id(id)` function now always clears the
Fake User bit. If it was intended that this bit was kept set, it's up to
the caller to explicitly call `id_fake_user_set(id)` afterwards.
Manifest Task: T90844
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D12663
Currently the Drivers Editor shows this (the blue thing can be dragged
to change frame):
{F10647661}
But the Drivers Editors X axis is the output of the driver [which can be
further tweaked by the curve] not time(frame).
So it seems better to not mix them here, it is just confusing to have
two different units on one axis.
Especially since what we really want to look at in X (the drivers output
value) can be in a totally unrelated range compared to frames, so e.g.
we might be interested in a drivers range from 0.0 to 1.0 and a
framerange of 100 to 200, so putting this on one axis just does not make
sense. Better to use a separate timeline for this.
Note 2.79 also did not do this.
Maniphest Tasks: T91157
Differential Revision: https://developer.blender.org/D12392
When "Show Cursor" is unchecked, the Drivers Editor would still display
the vertical line representing the cursor x.
Probably overseen in {rB65072499c65a} (historically the vertical line
could represent either the current frame of the cursor X in drawing, but
this is now much more separate).
There is no point in seeing part of the cursor in the Drivers Editor if
this is disabled.
Also correct outdated comments.
ref. T91157
Maniphest Tasks: T91157
Differential Revision: https://developer.blender.org/D12391
Make `BLI_path_contains()` case-insensitive on Windows. This behaviour
is dependent on the platform Blender is running on, like the rest of
BLI_path, and not on the style of paths (Windows-style paths will be
treated case-sensitively when Blender is running on Linux/macOS).
The related issue which is fixed by this change is the missing noisy
image pass when denoising and border render is used,
Need to allocate passes after the passes has been copied from the
original render result.
Labels in headers reserved space for an icon even when no icon was used.
This is caused by the shared function ui_text_icon_width adding 1.5x
a buttons X-units width the the width of the string.
Menu buttons detected this and subtracted the extra padding.
Instead of adding the same workaround for labels,
add ui_text_icon_width_ex that takes a padding argument.
Add presets for 'default', 'compact' and 'none' to avoid duplicating
padding values.
This allows removal of hard-coded label scaling for the add-object tool.
While World data has always been able to be marked as an asset, there
was no way to actually use them from the asset browser. This change
allows users to drag-drop world assets onto the Viewport and have them
appended/linked to their scene.
Differential Revision: https://developer.blender.org/D12566
Only run the node once for every unique geometry set in the input's
instance heirarchy. This can massively improve performance when
there are many instances, but it will mean that the result is the same
for every instance. For the previous behavior, a "Realize Instances"
node can be used before this one.
This node can be changed without versioning since the old material
assign node was already deprecated and replaced.
In a sub-panel it will be clearer that they are outputs, since they
just look like more inputs now. Unfortunately it is not possible to
make sub-panels display conditionally currently, so the output
sub-panel will always be visible whether or not it is empty.
Differential Revision: https://developer.blender.org/D12653
Part of the fix is by Jacques. This fixes the most obvious case, but it's
still not clear how to deal with non-mesh geometry instances or how to handle
motion blur for such instances.
As also explained in D6134, in most case of Stretch To usage in
rigs, it is desirable to use swing rotation, either via the old
method of pairing the constraint with Damped Track, or via the
Swing rotation type introduced in 2.82. This is for instance true
for all usages of the constraint in Rigify.
The reason can be understood by realizing that unlike order-
dependent euler rotations, swing is not biased to an axis, and
isn't affected by gimbal lock effects at merely 90 degrees
of rotation (it has only one singularity at 180 degrees).
Thus it makes sense to change the default for newly created
constraints to the Swing mode. This has no backward compatibility
concerns except for old tutorials and rig generation scripts.
Differential Revision: https://developer.blender.org/D12643
Basically this enables the select-tweaking behavior as per the
guidelines:
https://wiki.blender.org/wiki/Human_Interface_Guidelines/Selection#Select-tweaking.
We use this in most other other editors that allow selecting and
dragging multiple items. But besides the consistency improvement, this
is important if we want to support dragging multiple assets (or files)
in future. We want to support this at least for dragging multiple assets
into an asset catalog for the upcoming asset catalog UI.
With this commit, the distribute points on faces node runs only
once for every unique mesh in its input. That means if there are
100 instances of the same mesh, it will only run once.
This basically reverts rB84a4f2ae68d408301. The optimization there
didn't end up being worth it in the end, since it complicates code
quite a lot. It's also incompatible with this method of dealing with
instances, and it breaks field evaluation for instances, where we would
have to make sure to handle each instance transform properly otherwise,
evaluating the field separately for every instance.
Differential Revision: https://developer.blender.org/D12630
The Asset Catalog Definition File is now saved whenever the blend file
is saved. The location of the CDF depends on where the blend file is
saved, and whether previously a CDF was already loaded, according to the
following rules. The first matching rule wins:
1. Already loaded a CDF from disk? -> Always write to that file.
2. The directory containing the blend file has a
`blender_assets.cats.txt` file? -> Merge with & write to that file.
3. The directory containing the blend file is part of an asset library,
as per the user's preferences? -> Merge with & write to
`${ASSET_LIBRARY_ROOT}/blender_assets.cats.txt`
4. Create a new file `blender_assets.cats.txt` next to the blend file.
Add `BKE_preferences_asset_library_containing_path(&U, some_path)` that
finds the asset library that contains the given path.
This is a simple linear search, returning the first asset library that
matches. There is no smartness when it comes to nested asset libraries
(like returning the library with the best-matching path), although this
could be a useful feature to add later.
Add function `BLI_path_contains(container, containee)` that returns true
if and only `container` contains `containee`.
Paths are normalised and converted to native path separators before
comparing. Relative paths are *not* made absolute, to simplify the
function call; if this is necessary the caller has to do this conversion
first.
`BKE_object_material_slot_used` would only check obdata usages, but
particle settings can also (weirdly enough) use objects' material slots.
So now, as its name suggests, `BKE_object_material_slot_used` does take
an object as parameter, and also checks for potential slot usage from
psys in the object.
* Fixes missing update of the catalog tree when adding catalogs.
* Adds iterators for the catalogs, needed for UI code.
* Store catalog ID in the catalog tree items, needed for UI code.
* Other smaller API additions for the UI.
* Improve comments and smaller cleanups.
New functions are covered with unit tests.
Differential Revision: https://developer.blender.org/D12618
Reviewed by: Sybren Stüvel
This adds a new `GeometrySet::modify_geometry_sets` method that can be
used to update each sub-geometry-set separately without making any
instances real.
Differential Revision: https://developer.blender.org/D12650
Before the visibility test against the visibility flags was performed in an any-hit program in OptiX
(called `__anyhit__kernel_optix_visibility_test`), which was using the `__prim_visibility` array.
This is not entirely correct however, since `__prim_visibility` is filled with the merged visibility
flags of all objects that reference that primitive, so if one object uses different visibility flags
than another object, but they both are instances of the same geometry, they would appear the same
way. The reason that the any-hit program was used rather than the OptiX instance visibility mask is
that the latter is currently limited to 8 bits only, which is not sufficient to contain all Cycles
visibility flags (12 bits).
To mostly fix the problem with multiple instances and different visibility flags, I changed things to
use the OptiX instance visibility mask for a subset of the Cycles visibility flags (`PATH_RAY_CAMERA`
to `PATH_RAY_VOLUME_SCATTER`, which fit into 8 bits) and only fall back to the visibility test any-hit
program if that isn't enough (e.g. the ray visibility mask exceeds 8 bits or when using the built-in
curves from OptiX, since the any-hit program is then also used to skip the curve endcaps).
This may also improve performance in some cases, since by default OptiX can now perform the normal
scene intersection trace calls entirely on RT cores without having to jump back to the SM on every
hit to execute the any-hit program.
Fixes T89801
Differential Revision: https://developer.blender.org/D12604
* ID pointer returned by `wm_file_link_append_datablock_ex` was
improperly extracted from `WMLinkAppendDataItem` before append step.
* Code deleting linked IDs when their local matching version was re-used
did not properly clear `LIB_TAG_DOIT` beforehand.
If the theme used by the user did not touch the wire or the wire outline
colors this will update them as well.
This was supposed to be a part of a bigger UI theme change for 3.0. But
it was expedited because of the recent change in line thickness for the
noodles (2bd0205215).
Theme change by Pablo Vazquez.
Differential Revision: https://developer.blender.org/D12649
This patch allows passing a field to the modifier as output. In the
modifier, the user can choose an attribute name. The attribute
will be filled with values computed by the field. This only works
for realized mesh/curve/point data. As mentioned in T91376, the
output domain is selected in the node group itself. We might want
to add this functionality to the modifier later as well, but not now.
Differential Revision: https://developer.blender.org/D12644
For some reason was assuming setting a property in RNA would call its
update callback if any, but this actually needs to be done separately.
So add this call to `rna_property_override_operation_apply`.
There are cases where there is no way to ensure we do have/know about an
active scene. Further more, this should not be required to perform
'real' updates on data, only to perform additional special handling in
current scene (mostly related to editing tools, UI, etc.).
This pointer is actually almost never used in practice, and half of its current
usages are fairly close to abuse of the system (like calls to
`ED_gpencil_tag_scene_gpencil` or `BKE_rigidbody_cache_reset`).
This commit ensures that the few places using this 'active scene' pointer are
safely handling the `NULL` case, and clearly document the fact that a
NULL scene pointer is valid.
Scene passed to the update callback is the active scene it //may// not
be that actual ID owner of the affected data (although in practice it
should always be currently).
This makes it easier to spot which links contain fields and which
contain data. Actually, the patch makes all other links a bit thicker.
However, with soon-to-be-implemented theme changes, the
perceived thickness will be the same as before.
This is part of T91563.
Differential Revision: https://developer.blender.org/D12646
The original limit dates back from 2002 when Blender went open source.
After that many years some productions (e.g., Sprite Fright) are already
experiencing limitations for complex edits.
The future plans is to support an initial shorter (2?) number of
channels with support to "unlimited" channels.
Finally, I'm bumping the minimum file requirement since files with more
than 32 channels won't work well in old Blender versions.
In a future commit I will implement a sanitization so that we only read (and write)
128 channels. Making sure future changes of this number won't corrupt Blender.
Differential Revision: https://developer.blender.org/D12645
The clamp added will ensure immediate speed direction change on
changing to/from positive/negative speed factor when using the Speed
effect strip's Multiply mode.
Reviewed By: ISS, sergey
Differential Revision: https://developer.blender.org/D12462
Whilst in pose-mode, the selection filter only includes other objects in
pose-mode instead of the object selection.
This makes sense as the selection of the pose bones what the user as
acting on in the 3D view.
The object selection only makes sense to use in object mode.
Reviewed By: sybren
Maniphest Tasks: T81922
Ref D12494
While the option allows tools be be activated on press instead of tweak,
this meant box-select was catching Ctrl-LMB which is also used for
add/extrude in edit mode.
Resolve this by always using tweak for selection tools,
only supporting activation on press for other tools.
Note that this doesn't impact the default configuration.
This adds the ability to cancel out of the roll using ESC or RMB
(which is not common for viewops -- but makes sense in the case of roll
I think). This resets the view as well as potential locked cameras to
the original orientations (but does not remove potential autokeys --
which no transform does on cancel btw.)
Maniphest Tasks: T89883
Differential Revision: https://developer.blender.org/D12582
Since its introduction in {rB5c569d227b64}, the view roll was based on
horizontal movement only. Using a "real" angle not only feels more
natural but also has the benefit of getting more precission the further
away from the center you are (just like regular rotation, brush/stencil
rotation etc.). A similar thing has already been implemented in the
Grease Pencil Tools Addon, now make the blender standard roll the same.
Since this is not using the transform system, we are still lacking a
line in the viewport (this could be added but since this is always based
on the center of the view we dont necessarily need this), as well as the
additional Shift-extra-precission behavior.
Fixes T89883
Maniphest Tasks: T89883
Differential Revision: https://developer.blender.org/D12582
Proxy conversion is a fairly particular case of liboverride creation, in
which remapping all local usages of linked data probably makes more
sense, rather than only doing so whitin the overridden 'group' of IDs.
Introduce `BKE_callback_remove()`, which undoes the effect of
`BKE_callback_add()`. It also respects `funcstore->alloc` by freeing the
removed `funcstore` when needed.
This allows for shorter-lived objects in memory to unregister their
callbacks at the end of their lifespan.
`BKE_callback_global_finalize()` has been adjusted so that the
responsibility "remove a callback" is given to one function only.
Reviewed by: campbellbarton
Differential Revision: https://developer.blender.org/D12625
This adds a new Instance on Points node that is a replacement
for the old Point Instance node. Contrary to the old node,
it does not have a mode to instance objects or collections
directly. Instead, the node has to be used with an Object/
Collection Info to achieve the same effect.
Rotation and scale of the instances can be adjusted in the node
directly or can be controlled with a field to get some variation
between instances.
The node supports placing different instances on different points.
The user has control over which instance is placed on which point
using an Instance Index input. If that functionality is used, the
Instance Geometry has to contain multiple instances that can are
instanced separately.
Differential Revision: https://developer.blender.org/D12478
This adds two new input sockets to the Collection Info node:
* `Separate Children`: When turned off, the entire collection is output as a single
collection instance (same behavior as before). When turned on, each child of
the collection is output as a separate instance (children can be objects and collections).
Toggling this input should not change the visual transforms of the output geometry.
* `Reset Children`: Only used when `Separate Children` is on. When used, the transforms
of the instances are reset to the origin. This is useful when one wants to e.g. instance
the collection children separately in the upcoming instancing node.
Part of D12478.
Fix T91632: Stops the sample correlation between dimensions which was causing rendering artefacts on simple scenes.
This is done by increasing the amount of jitter the Cranley Patterson Rotation is allowed to add. Also, it uses the y dimension of the of the sample table for 1D sampling which causes further decorrelation between dimensions. As an additional measure the x and y dimensions are swapped randomly to provide further decorrelation.
Maniphest Tasks: T91632
Differential Revision: https://developer.blender.org/D12610
Zoom to Fit is working in all display modes, but was only exposed in
Image mode. This patch exposes it in all Image modes.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D12632
Multi-functions are not allowed to throw exceptions that are not
caught in the same multi-function. Previously, it was difficult to
backtrack a crash to a previously thrown exception.
smooth out jaggy lines with a given threshold. For each point in a stroke, the ones with in a given distance of its previous segment will be removed,
thus "zig-zag" artefacts can be cleaned up.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12050
This will help detecting missing API changes. Those keywords were added
on classes which did not already use them. Also added missing
`accepts_object_type()` on NURBS reader.
Point clouds are not imported and read anymore. This was caused by an
API change in rB128eb6cbe928e58dfee1c64f340fd8d663134c26 which was not
applied to `AbcPointsReader`. It did not cause a compile error as the
base class as a default implementation for this method.
We were writing large 2048x2048 tiles into EXR files, which appears to cause
integer overflow inside the OpenEXR library when there are multiple passes. Now
use smaller tiles in the image file, while still rendering large tiles.
This adds the requirement that the render tile size must be a multiple of 128
or be smaller than 128, this is adjusted automatically.
This node replaces the deprecated Attribute Randomize node, populating
a vector, float, integer or boolean field with random values. Vector,
float, and integer have min/max settings, which are also field aware.
The boolean type has a probability value for controlling what portion
of the output should be true. All four types have a field seed input
which is implicitly driven by the index, otherwise, all values would
be the same "random" value.
The Random Float node is now deprecated like other nodes, since it is
redundant with this node.
Differential Revision: https://developer.blender.org/D12603
Until now, the asset catalogs would only show up after all assets from
the library were loaded. Now the catalogs are read first, which makes
them appear pretty much immediately. This makes the UI more responsive
and feel less heavy.
I added a dedicated file-list type for asset libraries now. While not
necessarily needed, I prefer that so asset library specific stuff can be
handled in there.
This commit adds a node that generates a text paragraph as curve
instances. The inputs on the node control the overall shape of the
paragraph, and other nodes can be used to move the individual instances
afterwards. To output more than one line, the "Special Characters" node
can be used.
The node outputs instances instead of real geometry so that it doesn't
have to duplicate work for every character afterwards. This is much
more efficient, because all of the curve evaluation and nodes like fill
curve don't have to repeat the same calculation for every instance of
the same character.
In the future, the instances component will support attributes, and the
node can output attribute fields like "Word Index" and "Line Index".
Differential Revision: https://developer.blender.org/D11522
This patch adds a new node called "Special Characters" with two string
outputs: "Line Break" and "Tab". This is necessary because the newline
character cannot be easily typed with a keyboard, but is necessary for
the string to curve node.
Differential Revision: https://developer.blender.org/D12620
This adds initial limited support for socket tooltips. It's limited
in a couple of ways for now:
* Only works when hovering over the socket shape, not when hovering
over the value in the socket.
* Only works for built-in nodes that already use the new node
declaration system. This can later be extended to support pynodes.
Those limitations are well worth it for now, given that the
implementation is quite simple and the impact on usability is quite
large. More complex updates to the layout system, that would allow
showing socket tooltips in the nodes, can be done later. With the
current implementation we can at least start writing tooltips for
geometry nodes now.
This commit already adds tooltips for the Cylinder node as an example.
Differential Revision: https://developer.blender.org/D12607
In meshes modifer the Lowest is 0 and Highest is 1.0 and this was working inverted for grease pencil. Now, it works equals to meshes modifier.
Also changed the tooltip to keep consistency with meshes modifier.
When writing asset catalog definition files, order the catalogs by
(path, UUID). This ensures that every write produces the same file, playing
nice with versioning / synchronisation systems.
Add `operator<` to C++ class to allow lexicographic ordering of UUIDs.
This will be necessary when writing asset catalogs to disk in a predictable
(i.e. ordered) manner.
The "path with trailing slash" test catalog was using the same path as
another catalog, which meant it was ignored after doing the path
cleanup. It's now different in the test file in SVN, so it'll actually
show up in the test.
This commit also add an experimental userPreferences to prevent proxies
conversions on file load, and reporting for amount of coverted proxies
(and possible issues).
Note that potentially linked proxies from other libraries are not
hamdled here (this feature seems to be broken anyway in master
currently?).
This adds a replacement for the deprecated Point Distribute node.
Arguments for the name change can be found in T91155.
Descriptions of the sockets are available in D12536.
Thanks to Jarrett Johnson for the initial patch!
Differential Revision: https://developer.blender.org/D12536
By default, we'll always get a falloff like this from the tool:
{F10559413}
But in the context of using vertexgroups in modifiers/modeling, a choice
on how the gradient falloff of the Weightpaint Gradient tool is shaped
would be desirable:
"real" linear:
{F10559416}
Custom:
{F10559421}
{F10559428}
The way the Weightpaint gradient tool works is a bit outside the usual
tools that use brushes [even though it creates a brush on the fly in
`WPGradient_userData`].
However, it does not have an entry in `eBrushWeightPaintTool` and adding
one there does not play nice for the same reasons (not "really" being
integrated in the brush-based tools).
So in order to expose the brush curve in the UI, we would have to do one
of the following:
- [1] try to use `VIEW3D_PT_tools_brush_falloff`, for this to work:
-- make all kinds of exception in python super classes [`FalloffPanel`,
`BrushPanel`, `UnifiedPaintPanel`, ... -- including making real entries
in `eBrushWeightPaintTool`] to get a proper tool mode and...
-- .. to also make sure Falloff Shape and Front-Face Falloff are not
available [which the tool seems to just not support in its current form]
- [2] just have a simple, contained panel for this tool alone
This patch implements [2] and adds it as part of the ToolDef (could also
be done in `VIEW3D_HT_tool_header`, but again, I think this is nice to
keep separate from the usual tools)
{F10559482}
{F10559485}
Testfile:
{F10559442}
Fixes T91636
Maniphest Tasks: T91636
Differential Revision: https://developer.blender.org/D12614
When Browsing libraries the asset files were opened multiple times.
once to determine the needed groups to query and once for each
group to query the items in the group. For file browsing this makes sense
but for asset browsing this can be reduced.
This patch will load the asset files recursively and only opens them once.
Another change is that only the assets are requested and not filtered out
later in the process.
This patch is needed to simplify the library indexing. Where
we need access to the full library content.
## The numbers ##
Benchmarked by adding scenes of the spring open movie to the default
asset library. Refreshing the asset library would recursively load all the files
there.
| **8bc27c508a** | Processed 317 'directories/libraries' | 7.573986s |
| **Patch** | Processed 42 'directories/libraries' | 0.821013s |
{F10442811}
Reviewed By: mont29, Severin
Maniphest Tasks: T91406
Differential Revision: https://developer.blender.org/D12499
Goal is to add the length attribute to the Hair Info node, for better control over color gradients or similar along the hair.
Reviewed By: #eevee_viewport, brecht
Differential Revision: https://developer.blender.org/D10481
This implements the update logic for the vizualization of which
sockets pass data or constants directly, and which pass functions.
The socket shapes may still have to be updated. That should be
done separately, because it might be a bit more involved, because
socket shapes are currently linked to keyframe shapes. Currently
the circle and diamond shapes are used with the following meanings:
- Input Sockets:
- Circle: Required to be a single value.
- Diamond: This input supports fields.
- Output Sockets:
- Circle: This output is a single value.
- Diamond: This output may be a field.
Connecting a field to a circle input socket is an error, since a
field cannot be converted to a single value. If the socket shape
is a diamond with a dot in the middle, it means it is currently
a single value, but could be a field.
In addition to socket shapes, the intention is to draw node links
differently based on the field status. However, the exact method for
conveying that isn't decided yet.
Differential Revision: https://developer.blender.org/D12584
Previously this was only loading built-in render passes. Now instead of trying
to load the scene render passes, load whatever passes exist in the cache file.
Using a RenderResult (or a Viewer) was never really working (think you
cant get a real ImBuff from these) -- cannot use it as a clone, stencil
or canvas [Single Image paint texture slot].
In the case of using it as a 2D paint clone image this would also crash
[due to the Image Editor drawing refactor in 2.91].
Now [in the spirit of T73182 / D11179], prevent using these where
unappropriate by using rna pointer polling functions.
Also add a security check for the 2D paint clone image crash in case a
stencil ImBuff cannot be provided for some reason, but generally old
files are now patched in do_versions_after_linking_300 (thx @brecht!).
Fixes T91625.
Maniphest Tasks: T91625
Differential Revision: https://developer.blender.org/D12609
This follows three main targets:
* Make creation of new tree UIs easy.
* Groundwork to generalize tree UIs (so e.g. Outliner, animation
channels, asset catalogs and spreadsheet data-sets don't have to
re-implement basic tree UI code) or even other data-view UIs.
* Better separate data and UI state. E.g. with this, tree-item selection
or the open/collapsed state can be stored on the UI level, rather than
in data. (Asset Catalogs need this, storing UI state info in them is
not an option.)
In addition, the design should be well testable and could even be
exposed to Python.
Note that things will likely change in master still. E.g. the actually
resulting UI isn't very nice visually yet.
The design is documented here:
https://wiki.blender.org/wiki/Source/Interface/Views
Differential Revision: https://developer.blender.org/D12573
This patch simplifies the curve object to mesh conversion
used by the object convert operator and exporters.
The existing code had a convoluted model of ownership, and did quite
a bit of unnecessary work. It also assumed that curve objects always
evaluated to a mesh, which is not the case anymore.
Now the code checks if the object it receives is evaluated. If so,
it can simply return a copy of the evaluated mesh (or convert the
evaluated curve wire edges to a mesh if there was no evaluated mesh).
If the object isn't evaluated, it uses a temporary copy of the object
with modifiers removed to create the mesh in the same way.
This follows up on the recent changes to curve evaluation,
namely that the result is always either a mesh or a wire curve.
Differential Revision: https://developer.blender.org/D12533
This adds three new methods:
* `InstancesComponent::foreach_reference_as_geometry(...)`
* `GeometrySet::attribute_foreach(...)`
* `GeometrySet::gather_attributes_for_propagation(...)`
The goal is that these iteration primitives can be used in places
where we use more specialized iterators currently.
Differential Revision: https://developer.blender.org/D12613
Put the `bUUID` class in the `blender` namespace, instead of the
`blender::bke` namespace.
As a result, some C++ code now correctly uses the C++ class, where
previously it would use the C struct and use implicit casting where
necessary. As a result, support for initializer lists had to be
explicitly coded and in another place an explicit `::bUUID` was
necessary to avoid ambiguity.
No functional change.
The shader is complicated by itself, having hardcoded values makes it
even more cryptic.
I also renamed the shader because the shader is not for the keyfarme diamond only,
but for all the keyframe shapes.
Differential Revision: https://developer.blender.org/D12615
Choosing a UV layer would actually affect the overlay in the viewport
and also painting with the mask brush was in that UV space, but the
resulting stencil mask was always applied with the active UV (not the
explicitly selected stencil UV -- the one one is looking at in the
viewport!) to painting.
This has been like that as far as I have checked back (at least 2.79b),
I am surprised this has not come up before, but it does not seem to make
sense at all...
Now use the UV specified for the stencil layer when applying the mask for
painting, so it corresponds to the stencil mask one is looking at in the
viewport.
Maniphest Tasks: T91557
Differential Revision: https://developer.blender.org/D12583
Declare the current format used for asset catalog definition files as
version 1, and write that to the files. Files without that version number
will be rejected.
This makes it much easier to move to different versions later, with the
opportunity to do versioning on file load.
The version is not associated with any version of Blender, but a separate
integer that's simply incremented when a non-backward-compatible change
happens.
Catalogs work like directories on disk (without hard-/symlinks), in that
an asset is only contained in one catalog.
See T90066 for design considerations.
#### Known Limitations
Only a single catalog definition file (CDF), is supported, at
`${ASSET_LIBRARY_ROOT}/blender_assets.cats.txt`. In the future this is
to be expanded to support arbitrary CDFs (like one per blend file, one
per subdirectory, etc.).
The current implementation is based on the asset browser, which in
practice means that the asset browser owns the `AssetCatalogService`
instance for the selected asset library. In the future these instances
will be accessible via a less UI-bound asset system.
The UI is still very rudimentary, only showing the catalog ID for the
currently selected asset. Most notably, the loaded catalogs are not
shown yet. The UI is being implemented and will be merged soon.
#### Catalog Identifiers
Catalogs are internally identified by UUID. In older designs this was a
human-readable name, which has the problem that it has to be kept in
sync with its semantics (so when renaming a catalog from X to Y, the
UUID can be kept the same).
Since UUIDs don't communicate any human-readable information, the
mapping from catalog UUID to its path (stored in the Catalog Definition
File, CDF) is critical for understanding which asset is stored in which
human-readable catalog. To make this less critical, and to allow manual
data reconstruction after a CDF is lost/corrupted, each catalog also has
a "simple name" that's stored along with the UUID. This is also stored
on each asset, next to the catalog UUID.
#### Writing to Disk
Before saving asset catalogs to disk, the to-be-overwritten file gets
inspected. Any new catalogs that are found thre are loaded to memory
before writing the catalogs back to disk:
- Changed catalog path: in-memory data wins
- Catalogs deleted on disk: they are recreated based on in-memory data
- Catalogs deleted in memory: deleted on disk as well
- New catalogs on disk: are loaded and thus survive the overwriting
#### Tree Design
This implements the initial tree structure to load catalogs into. See
T90608, and the basic design in T90066.
Reviewed By: Severin
Maniphest Tasks: T91552
Differential Revision: https://developer.blender.org/D12589
Buttons to edit asset metadata are now disabled for assets from an
external library (i.e. assets not stored in the current .blend file).
Their tooltips explain why they are disabled.
Had to do some RNA trickery to disable the metadata properties at RNA
level, not at UI script level.
The basic idea is:
* Local data-block assets set the data-block as owning ID for the asset
metadata RNA pointer now.
* That way we can use the owner ID to see where the metadata belongs to
and decide if it's editable that way.
* Additionaly, some Python operators needed better polling so they show
as grayed out, and don't just fail.
One important thing: Custom properties of the metadata can still be
edited. The edits won't be saved however. Would be nice to disable that,
but it's currently not supported on BPY/IDProperty/RNA level.
Addresses T82943.
Differential Revision: https://developer.blender.org/D12127
Make the Windows version of `BLI_dir_create_recursive()` call
`BLI_path_slash_native()` before it tries to handle the path. This
should make it possible to call it with non-native path separators.
This change was provided by our Windows platform maintainer @LazyDodo in
P2414, so I assume he agrees with this change.
This allows most tools to activate on press, removing a small but
noticeable distance between the initial press and detection of a drag
event.
Gizmo tweak no longer actives when Alt is held, to avoid conflicting
with cursor placement.
This has the advantage that the gizmo doesn't get in the way when Alt
is used for activating tools or placing the cursor.
Some gestures were activating immediately on tweak events,
extend this to mouse-press and click-drag.
Without this change, box-select for example wouldn't be automatically
activated on mouse-press.
There is no reason to lock behavior into a specific configuration in
those calls, make them properly configurable like the rest of the
link/append code.
This also enable users of those functions to activate 'ID reuse'
behavior.
in asset context, when user drag & drop a material several time, they
would still expect to re-use existing one instead of getting new copies
of it, even if this material is directly appended (and not an indirect
dependency of an object e.g.).
Flags controlling link/append code are split between two enums, one in
`DNA_space_types.h` and one in `BLO_readfile.h`.
This commit:
- Moves flags exclusively used in WM and BLO code to `eBLOLibLinkFlags`
in `BLO_readfile.h`. Flags in `eFileSel_Params_Flag` from
`DNA_space_types.h` are now only the ones effectively used by the
file browser editor code too.
- Fixes some internal utils in `readfile.c` still taking `short` flag
parameter instead of proper `int` one.
NOTE: there are a few other flags that could probably be moved to
`eBLOLibLinkFlags` (at the very least `FILE_LINK`, probably also
`FILE_AUTOSELECT` and `FILE_ACTIVE_COLLECTION`), since those are not
effectively used by the file browser, and control linking/appending
behavior, not filebrowser behavior.
However for now think it's safer to not touch that.
This commit changes the custom property edit operator to make editing
different properties types more obvious and expose more of the data,
made more easily possible by the recent UI data refactor.
Previously, the operator guessed the type you wanted based on what you
wrote in a text box. That was problematic, you couldn't make a string
property with a value of `1234`, and you had to know about the Python
syntax for lists in order to create an array property. It was also slow
and error prone; it was too easy to make a typo.
Improvements compared to the old operator:
- A type drop-down to choose between the property types.
- Step and precision values are exposed.
- Buttons that have the correct type based on the property.
- String properties no longer display min, max, etc. buttons.
- Generally works in more cases. The old operator tended to break.
- Choose array length with a slider.
- Easy to choose to use python evaluation when necessary.
- Code is commented, split up, and much easier to understand.
The custom property's value is purposefully not exposed, since the Edit
operator is for changing the property's metadata now, rather than the
value itself. Though in the "Python" mode the value is still available.
More improvements are possible in the future, like exposing different
subtypes, and improving the UI of the custom properties panel.
Differential Revision: https://developer.blender.org/D12435
This adds constrained angle mode improvements,
snapping to global and local orientation,
visible distance and angle measurements,
undo capability,
x-ray mode,
multi-object edit mode.
See https://developer.blender.org/D12600 for more details.
Note: this project moved some of the default keymappings
around a bit, as discussed with users in the thread
https://devtalk.blender.org/t/gsoc-2021-knife-tool-improvements-feedback/19047
We'll change the manual documentation in the next couple of days.
Issue caused by our patch in rB1af722b81912
we replaced an array with a memory allocation
but we forgot to update the assert which now
used an invalid method to calculate the array
size.
SVN libs will have to be updated before
T91602 will be fixed for end users.
Added description for Batch rename which pop-ups when
hovering the mouse over "Batch rename" inside the edit menu.
Fixes T91390
Reviewed By: Blendify
Maniphest Tasks: T91390
Differential Revision: https://developer.blender.org/D12594
Making object which uses volume shader invisible will mark the shader
as not having a volume, forcing re-compilation of the shader to bring
it back to a consistent state.
The compilation is happening as part of scene update, which needs to
know kernel features. So there is a feedback loop.
Use more relaxed way of knowing whether there is a volume in the
shader for the kernel features, which doesn't require shader to be
compiled first.
Solves issues from the report, but potentially causes extra memory
allocated if the volume part of graph is fully optimized out. This
downside is solvable, but would need to split scene update into two
steps (the one which requires on kernel, and the one which does not).
It will be an interesting project to tackle, but for a bug fix is
better to use simpler solution.
There was an optimization to remove duplicate storage of normals as attributes
when using normal maps. However for named attributes like this we still need to
store the attribute.
Don't request normal attribute from the normal map node now, instead of skipping it
in the geometry code.
When a new scene is created, the paint pointers are not available before using them, so the python panel exits because the pointer was None.
Now, the pointer is checked in order to display the materials panel as expected.
This commit adds to ID struct a new optional 'weak reference' to a
linked ID (in the form of a blend file library path and full ID name).
This can then be used on next append to try to find a matching local ID
instead of re-making the linked data local again.
Ref. T90545
NOTE: ID re-use will be disabled for regular append for the time being
(3.0 release), and only used for assets. Therefore, this commit should
not change anything user-wise.
Differential Revision: https://developer.blender.org/D12545
This node can be used to fillet splines at control points to
create a circular arc.
The implementation roughly follows T89227's design.
The node works in two main modes: Bezier and Poly
* Bezier: Creates a circular arc at vertices by changing
handle lengths (applicable only for Bezier splines).
* Poly: Creates a circular arc by creating vertices (as
many as defined by the Count fields input) along
the arc (applicable for all spline types).
In both modes, the radius of the created arc is defined
by the Radius fields input.
The Limit Radius attribute can be enabled to prevent
overlapping when the defined radius exceeds the maximum
possible radius for a given point.
Reviewed By: Hans Goudey
Differential Revision: https://developer.blender.org/D12115
The old modifier had two modes, but it is better to keep separated as meshes.
The UI has changed to be more consistent, including a new column type of modifiers.
Note: The logic has not changed with the previous version of the modifier, just is a split on two modifiers..
Reviewed By: mendio, pablovazquez
Differential Revision: https://developer.blender.org/D12586
Samples count pass is normalized to the overall number of samples.
This means that we need to store actual value of the samples in the
tile buffer file.
A bit annoying to pull all those settings to BufferParams and need
to find a more generic solution, but for now this is easiest and a
quickest solution.
Differential Revision: https://developer.blender.org/D12597
Adds a new operator to the pose slider tools that blends the
current pose with the neighbouring poses in the timeline.
The operator can be called in pose mode with Shift+Alt+E
or from the "pose" menu under "In betweens/Blend to Neighbour"
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D9137#inline-105214
Ref: D9137
Outliner tree building code abuse the `ID.newid` pointer to store non-ID
data. While this is bad and should be fixed at some point, for the time
being at the very least do not use ID BKE API to deal with this pointer
in that specific case, this needs its own proper code.
Reported by Thomas DInges: the default cube render in Cycles has jagged
edges during rendering. Happens on AMD Radeon RX 5500 XT.
Force linear interpolation at zoom level 1 and less.
Reviewed by @fclem
Initializing the description property was completely forgotten.
It also seems it may be missing sometimes, so use `get`.
Also, clean values when there is no data, and correctly use
the return value of `get_value_eval` in one instance.
Several areas within blender can benefit a JSON reader/writer library.
Areas like the asset browser, XR and grease pencil.
After looking at the available options we selected nlohmann's JSON for
modern C++ library. It is actively maintained for over 10 years and
flexible.
This patch only adds the header only implementation of the library so it
can be used by different areas. The asset browser project is planning to
add a small abstraction layer so it will be easier to switch between
several different serialization formats. This is currently in
development in D12544.
In cases the abstraction layer can be an overhead and undesired to be used.
In this case the header file can be directly included.
Reviewed By: Severin
Maniphest Tasks: T91430
Differential Revision: https://developer.blender.org/D12567
Up lower clamp on spec_angle to prevent NaN from being generated on intel GPUs at low roughness.
Fixes T88754
Reviewed By: fclem
Maniphest Tasks: T88754
Differential Revision: https://developer.blender.org/D12508
The XR_MSFT_controller_model OpenXR extension provides a glTF
controller model that can be displayed to users during a VR session.
There are plans to support this in D10948, which will greatly improve
VR immersion when using a compatible OpenXR runtime.
TinyGLTF (https://github.com/syoyo/tinygltf) was agreed upon as a
simple and sufficient solution for loading this glTF controller model,
which will be performed at the GHOST abstraction layer. Although by
default it has two additional dependencies, stb and json, stb can be
excluded by defining TINYGLTF_NO_STB_IMAGE and
TINYGLTF_NO_STB_IMAGE_WRITE whereas json will be added as a separate
extern lib in D12567.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D12344
This commit adds a field input node that outputs the fraction of the
total length of the spline on each control point. This is useful for
anything that involves varying a value depending on how far along
the spline it is.
It also works when evaluated on the spline domain, where it outputs
the fraction of the total length of all of the splines at the start.
The operation isn't as well defined for NURB splines for the reasons
noted in the code comment. That can be said explicitly in the docs.
Differential Revision: https://developer.blender.org/D12548
This commit adds warning messages to "legacy" nodes that will be
removed in the future. The warning is shown in the node header, but
it is not printed in the terminal or displayed in the modifier. It is
also not propogated to node groups, but that is a more general task.
If the modifier's node tree has executed a deprecated node, it will
display a warning and a "Search" button that will select the nodes and
pan to them in the node editor. This doesn't open child node trees and
select nodes in there, because I want to keep this operator simple and
avoid wasting a lot of time perfecting this behavior.
Differential Revision: https://developer.blender.org/D12454
Rename the `UUID` struct to `bUUID`. This avoids a symbol clash on
Windows, which also defines `UUID`. This only pops up when a `UUID`
field is used in the DNA code, which is why it wasn't a problem before
(it will be once D12589 lands).
No functional changes.
With this commit, each referenced instance data will be converted to
a geometry instances and processed separately. This should result in
a large speedup when the instances component has many insances
referring to the same data.
This change can act as a blueprint for other nodes that need to
implement similar behavior. It adds some helper functions on the
instances component to make that easier.
Thanks to Erik Abrahamsson for a proof of concept patch.
Differential Revision: https://developer.blender.org/D12572
This patch adds four new nodes to a new "Text" category:
- String Length: Outputs length of a string
- String Substring: Outputs part of a string
- Value to String: Converts a value to a string
- String Join: Concatenates multiple strings with a delimiter
The initial use case of these nodes is the upcoming string to curve
node. However, they could also be used to calculate dynamic attribute
names, or with string attributes in the future.
Differential Revision: https://developer.blender.org/D12532
This node outputs the direction vector, or tangent of a curve at every
control point. For poly splines this is simply the evaluated tangents,
so it all works very simply. For Bezier splines it uses the tangent at
the evaluated point corresponding to each control point, and NURBS
are interpereted as poly splines built from their control points.
Internally the node is called "Input Tangent" to simplify using it for
mesh tangents as well in the future like the "Normal" node.
Differential Revision: https://developer.blender.org/D12581
Currently, the drop indicator colors are hardcoded to white text on semi-transparent black background.
This patch makes the drop indicator use the tooltip theme settings, as they serve a similar purpose.
{F10530482, size=full}
All built-in themes seem to work well and got improved readability.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D12588
rB8e21d528cab98 neglected to add versioning to add the new
"use_attribute" and "attribute_name" properties to the modifier input
list. Though they are added if the modifier's interface is updated, that
doesn't happen when the file is loaded, so patch adds them manually.
Another solution would be calling `MOD_nodes_update_interface`,
but that would require including the modifiers module.
Differential Revision: https://developer.blender.org/D12535
I plan to use this for curve object data conversion to mesh in D12533,
and possibly for the implicit curve to mesh conversion in the curve
and text object modifier stack in the future.
Differential Revision: https://developer.blender.org/D12585
The versioning has to have different behavior for when the old default
value had a float type rather than a double type. Also use memcpy
rather than dupalloc, since it's a bit clearer.
It is valid to e.g. copy construct an integer in the same place,
because it is a trivial type. It does not work for types like std::string.
This fixes a crash reported in D12584 where it would copy a buffer
into itself. We should probably also avoid doing this copy alltogether
but that can be done separately.
Extend the stroke following an approximated circluar/helical curve.
This can be used as an effect for lineart or on its own as helix generator.
Reviewed By: Sebastian Parborg (zeddb), Hans Goudey (HooglyBoogly), YimingWu (NicksBest), Antonio Vazquez (antoniov), Henrik Dick (weasel)
Differential Revision: https://developer.blender.org/D11668
# 请为您的变更输入提交说明。以 '#' 开始的行将被忽略，而一个空的提交
# 说明将会终止提交。
#
# 位于分支 master
# 您的分支与上游分支 'origin/master' 一致。
#
# 要提交的变更：
# 修改： source/blender/blenkernel/BKE_gpencil_geom.h
# 修改： source/blender/blenkernel/intern/gpencil_geom.cc
# 修改： source/blender/gpencil_modifiers/intern/MOD_gpencillength.c
# 修改： source/blender/makesdna/DNA_gpencil_modifier_defaults.h
# 修改： source/blender/makesdna/DNA_gpencil_modifier_types.h
# 修改： source/blender/makesrna/intern/rna_gpencil_modifier.c
#
The issue was caused by `textureSize()` returning the size of the level 0
even when the min texture level is higher than 0.
Using a uniform to pass the correct size fixes the issue.
This issue also affected the downsampling of radiance for reflections and
refractions.
This does not affect anything other than the recusive downsampling shaders.
This includes much improved GPU rendering performance, viewport interactivity,
new shadow catcher, revamped sampling settings, subsurface scattering anisotropy,
new GPU volume sampling, improved PMJ sampling pattern, and more.
Some features have also been removed or changed, breaking backwards compatibility.
Including the removal of the OpenCL backend, for which alternatives are under
development.
Release notes and code docs:
https://wiki.blender.org/wiki/Reference/Release_Notes/3.0/Cycleshttps://wiki.blender.org/wiki/Source/Render/Cycles
Credits:
* Sergey Sharybin
* Brecht Van Lommel
* Patrick Mours (OptiX backend)
* Christophe Hery (subsurface scattering anisotropy)
* William Leeson (PMJ sampling pattern)
* Alaska (various fixes and tweaks)
* Thomas Dinges (various fixes)
For the full commit history, see the cycles-x branch. This squashes together
all the changes since intermediate changes would often fail building or tests.
Ref T87839, T87837, T87836
Fixes T90734, T89353, T80267, T80267, T77185, T69800
Draw thumbnails as strip overlay. This works for movie and image strips.
To draw thumbnails, this overlay has to be enabled and strips must be
tall enough.
The thumbnails are loaded from source file using separate thread and
stored in cache.
Drawing code uses only images stored in cache, and if any is missing,
background rendering job is started. If job can not render thumbnail,
to prevent endless loop of creating job for missing image it sets
`SEQ_FLAG_SKIP_THUMBNAILS` bit of `Sequence` flag.
To prevent visual glitches during timeline panning and zooming, `View2D`
flag `V2D_IS_NAVIGATING` is implemented. If bit is set, drawing code
will look for set of evenly distributed thumbnails that should be
guaranteed to exist and also set of previously displayed thumbnails.
Due to volatile nature of cache these thumbnails can be missing anyway,
in which case no new thumbnails will be drawn for particular strip.
Cache capacity is limited to 5000 thumbnails and performs cleanup of
non visible images when limit is reached.
ref T89143
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D12266
Add tools for image manipulation in sequencer preview region.
This includes:
- Translate, rotate and resize operators, tools and gizmos
- Origin for image transformation
- Median point and individual origins pivot modes
- Select and Box select operator works in preview
- Image overlay drawing
ref T90156
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12105
This is used to find a valid collection in which to instantiate stray
objects and collections.
In some cases there will be no such active view layer, in which case we
can consider using the Scene's master collections children hierarchy
instead to find a valid instantiated parent collection for those stray
data.
With the LMB select key-map some tools required clicking on a gizmo.
With this preference it's possible to hold Alt and click anywhere.
Addresses T83689.
Expose a key-map preference "Fallback Tool (RMB)",
disabled by default.
The right mouse button uses the fallback tool
(currently visible selection tool in the toolbar),
instead of always tweaking.
When any selection tool is active, right mouse always tweaks.
To enable fallback selection on RMB, set the "Right Mouse Select Action"
to "Selection Tool".
Internal changes:
- Add fall-back key-maps, separate key-maps needed for when the tool is
run as a fall-back. This is needed so RMB-select can support fall-back
tools, so left-mouse can be used when it's the active tool and RMB
can be used as a fall-back action when another tool is active.
- Add options field to tools so tools without gizmos can enable the
full-back tool keymap.
- Support multiple key-maps for keymap handlers.
- Fall-back keymaps now co-exist with the tool-keymaps.
So both keymaps may be active at once - using different mouse buttons.
When gizmos are in use, a highlighted gizmo prioritizes the
tool-keymap over the fall-back keymap.
Resolves T83690.
Reviewed By: JulienKaspar
Ref D12493
Some selection operators return (PASS_THROUGH & FINISHED) so the tweak
event isn't suppressed from the PRESS event having been handled.
This is now restricted to events with a PRESS action.
Without this, using CLICK for selection was passing the event through
which could run other actions unintentionally.
This node allows sampling positions, tangents, and normals at any
arbitrary point along a curve. The curve can include multiple splines,
all are taken into account. The node does not yet support transferring
generic attributes like radius, because some more general tooling will
make that much more feasible and useful in different scenarios.
This is a field node, so it is evaluated in the context of a data-flow
node like "Set Position". One nice thing about that is it can easily
be used to move an entire geometry like the follow path constraint.
The point along the curve is chosen either with a factor of the total
length of the curve, or a length into the curve, the same choice used
in the curve trim node.
Differential Revision: https://developer.blender.org/D12565
This nodes evaluates a field on a geometry and outputs various
statistics about the entire data set, like min, max, or even
the standard deviation. It works for float and vector types currently,
though more types could be supported in the future.
- All statistics are calculated element-wise for vectors.
- "Product" was not added since the result could very easily overflow.
- The "Size" output was not added since it isn't specific to an
attribute and would fit better in another node.
The implementation shares work as much as possible when multiple
statistics are needed.
This node has been in development since the beginning of this year,
with additions from Johnny Matthews and Hans Goudey.
Differential Revision: https://developer.blender.org/D10202
There may be mode specific panels for some assets in the navigation or
the asset metadata sidebar. For example the pose library will likely do
this. So let the regions redraw on mode changes.
This change makes the Set Position node do nothing by default.
Before, the geometry would always disappear, because it all points
would be moved to (0, 0, 0).
Differential Revision: https://developer.blender.org/D12553
Change of File Browser "Favorites" section header in source list
(T panel) to "Bookmarks" to maintain consistency with all the other
bookmark-related text and operations.
See D10262 for more information and alternatives considered.
Differential Revision: https://developer.blender.org/D10262
Reviewed by Julian Eisel
"iff" was intended as "if and only if". while exact use of abbreviations
isn't clear cut, I assumed this was a typo & it's not used anywhere
else in source/, expand to "only if" (suggested by Sybren).
This makes the Noise Texture node available in geometry nodes.
It should behave the same as in shader node, with the exception
that it does not have an implicit position input yet. That will
be added separately.
Differential Revision: https://developer.blender.org/D12467
Previously, the node would always realize instances implicitly.
Now it can change the position of entire instances.
The Realize Instances node can be used before if the old
behavior is required.
Differential Revision: https://developer.blender.org/D12555
Issue revealed by rB546314fc9669 change, also error itself exited before
that commit.
Now we do accept git command to fail when trying to checkout the
specified branch from sub-modules, and only actually error in case the
fall-back branch (aka master) cannot be properly checked out.
Thanks fot Ray molenkamp (@LazyDodo) for report and initial patch
(D12560).
This node has a simple geometry input and output.
If the input geometry contains instances, they will be realized
into actual geometry. When there are many instances, this can
be very slow and memory intensive. Generally, instances should
only be made real when necessary, e.g. when every instance
should be deformed independently.
Differential Revision: https://developer.blender.org/D12556
On Apple machines, call `clock_gettime()` instead of `timespec_get()`.
macOS only introduced `timespec_get()` in version 10.15 (introduced
approx two years ago, so in 2019), even though the function is from C11.
XOR the 'seconds' and 'nanoseconds' fields of the current time to seed the
RNG used for generating random UUIDs. This ensures a better seed just in
case the clock as no sub-second resolution.
The API was checking the number of total weights with the first point of the stroke and this was not valid because each point can have different number of weight elemnts,
The case that checked whether there were evaluated edges was incorrect,
since two points are needed for an edge. Then also avoid running the
accumulation for an empty span.
It's equivalent to the OpenImageDenoise prefiltering option in Cycles.
See D12043.
Prefilter modes:
- None: No prefiltering, use when guiding passes are noise-free.
- Fast: Denoise image and guiding passes together. Improves quality when
guiding passes are noisy using least amount of extra processing time.
- Accurate: Prefilter noisy guiding passes before denoising image.
Improves quality when guiding passes are noisy using extra
processing time.
Reviewed By: #compositing, jbakker, sergey
Differential Revision: https://developer.blender.org/D12342
The enum called "interpolate" was really a choice of methods for mapping
inputs to positions on the curve, whereas the "sample" enum was used to
define a way to create a whole set of new points from the curve, without
any input parameters. The "re-sample" vs. "sample" naming makes that
distinction better.
On the blender side this commit fixes importing video files with audio
and video streams that do not share the same start time and duration.
Differential Revision: https://developer.blender.org/D12353
After new AUD API changes from 2.8x what "buffer" function used to do
has now become "cache" function (it caches a sound into RAM). Therefore,
the basic aud example should call this new "cache" function instead of
"buffer" function.
Thanks to Michael-Z-Freeman for pointing out.
since `AssetHandle` does not have a `name_property`
(`RNA_def_struct_name_property`), and the UIList is just using the
default `uilist_filter_items_default` it simply cannot filter on names
(`RNA_struct_name_get_alloc` wont succeed).
Adding a name_property also wont work since `AssetHandle` inherits
`PropertyGroup` (which already sets name_property).
So this adds a (temporary) hack exception for RNA_AssetHandle in
uilist_filter_items_default until the design of `AssetHandle` progresses
further.
thx @Severin for additional feedback
Maniphest Tasks: T91461
Differential Revision: https://developer.blender.org/D12541
This patch allows Asset Browser previews to be made regardless
of the setting of the (unrelated) "File Preview Type" Preference.
See D12484 for more details.
Differential Revision: https://developer.blender.org/D12484
Reviewed by Julian Eisel
Use the inverse of the grease pencil object. This patch fixes the issue for bones and objects.
Maniphest Tasks: T91481
Differential Revision: https://developer.blender.org/D12539
Add `BLI_uuid` and `DNA_uuid_types.h` with a UUID implementation
following RFC4122 (https://datatracker.ietf.org/doc/html/rfc4122.html).
The following features are implemented:
- A struct of 128 bits that can be used in DNA definitions.
- Generation of version 4 UUIDs, that is, purely random ones.
- UUID equality function.
- String to UUID and UUID to string conversion functions that are
compatible with RFC4122.
- C++ stream operator that outputs the UUID as string.
This UUID will be used by the asset system, to uniquely identify asset
catalogs.
Reviewed By: Severin, jacqueslucke
Differential Revision: https://developer.blender.org/D12475
When using FModifier `Restrict Frame Range`, the resulting influence was
zero being exactly on `Start` / `End` range borders (so borders were
**exclusive**).
This made it impossible to chain FModifers together (forcing the user to
specify values slightly below the desired border in following
FModifiers).
This is now corrected to be **inclusive** on Start / End range borders.
Before
{F10234864}
After
{F10234865}
Testfile
{F10234866}
In the case of touching open borders (so [frame A frame B] followed by
[frame B frame C]) both modifiers are evaluated (in stack order).
If the later modifier has full influence (and is not additive) this simply
means the result is the same as the later modifier's value.
If influences below 1 are used (or modifiers are additive) both modifier's
values are interpolated/added accordingly.
technical notes:
- this was caused by the introduction of FModifier Influence/BlendIn-Out
in rB185663b52b61.
- for comparison, see other occurrences of
`FMODIFIER_FLAG_RANGERESTRICT`.
- the following conditions in `eval_fmodifier_influence` for blend in/
out have been changed accordingly.
Maniphest Tasks: T85564
Differential Revision: https://developer.blender.org/D10401
Change KeyMapItem.alt/ctrl/shift/oskey to integer types,
where -1 is used to ignore the modifier when matching key-map items.
It was only possible to set all modifiers to -1 at once from RNA
using the 'any' property.
Afterwards individual modifiers could be set back to true/false.
Although these key-map items could not be exported/imported.
Exposing the values directly avoids the need for cumbersome workarounds.
These were added in a1c8543f2a (2007)
but never used.
Nor did they have any meaning in practice.
Note that versioning keymap items isn't needed as these values were
never set. The code-paths that set these values also set KM_MOD_FIRST
causing `keymap_event_set` to only ever assign values of 0 or 1.
These flags complicate further exposing KM_ANY (-1)
which is also a valid value for modifiers.
- Show "Lasso Select" in menus (along with Box & Circle select)
- Show "Extrude to Cursor" (along with other extrude actions).
- Rename operators that add/extrude on Ctrl-Click
since their names were inconsistent.
This is mainly for discoverability.
While the screenshot operator showed an "Area" option,
it wasn't usable from the main menu (unless accessed via menu search).
Split screenshot area into an operator that depends on cursor.
Support waiting for input so operators that depend on the
cursor location are usable from menus / buttons.
Use an operator type flag which the user interface code checks for,
waiting for input when run from a menu item.
This patch only supports this feature, there are no functional changes.
The motivation for this change is discoverability since some actions
were either hidden or broken when accessed from menus
(where the behavior of the operator depended on the menu location).
In general, waiting for input is *not* an efficient way to access tools,
however there are over 50 operators with a "wait_for_input" property
so this isn't introducing a new kind of interaction,
rather exposing this in a way that does not need to be hard-coded into
each operator, or having modal callbacks added for the sole purpose
of waiting for input.
Besides requiring boiler plate code using a "wait_for_input" property
has the added down-side of preventing key shortcuts from showing.
Only the menu items will enable the property,
causing them not to match key-map items.
Reviewed By: Severin
Ref D12255
An issue with the previous commit-- the default value of the type was
used instead of the property value when the "use_attribute" property
was missing.
This adds a toggle to node group inputs exposed in the modifier to use
an attribute instead of a single value. When the toggle is pressed, the
button switches to a text button to choose an attribute name. Attribute
search isn't implemented here yet.
One confusing thing is that some values can't be driven by attributes
at all, like the size of a primitive node. In that case, we should have
a node warning, but that will be separate since it's more general.
We can also have an option to turn off this toggle in node group
input settings.
The two new properties for each input are stored with the same name
as the value, but with `"_use_attribute"` and `"_attribute_name"``
suffixes. The properties are not added for socket types that don't
support attribute input, like object sockets.
Differential Revision: https://developer.blender.org/D12504
Adds an "Auto" option to blend thumbnail types that will automatically
use Screenshot if there is no camera and 3dview, or workbench render
with shading settings from the largest 3dview.
See D12407 for more details.
Differential Revision: https://developer.blender.org/D12407
Reviewed by Campbell Barton
This should allow easier changes when it's helpful to use C++ types.
The diff is for a test on the buildbot.
Differential Revision: https://developer.blender.org/D12528
When saving blend files close any menus that might be open, show
"waiting" mouse cursor right away, before creating preview.
See D12507 for more details.
Differential Revision: https://developer.blender.org/D12507
Reviewed by Campbell Barton
This patch allows point and spline attributes to be transferred to the
mesh generated by the curve to mesh node. All dynamic named and
anonymous attributes are transferred. So a user-created attribute will
be transferred, but "radius", "tilt" or the handle position attributes
won't be transferred by default and will need to be copied first.
This trade-off is made for performance, since most of the time, users
won't need these attributes copied.
Generally, attributes are transferred to the point/vertex domain.
However, if they have the same name as a built-in mesh attribute that
only exists on a different domain, like "shade_smooth", then they can
be transferred directly to that domain as well. Conversion directly to
the face corner domain is not necessary because there are no builtin
face corner attributes. I see this conversion directly to other domains
as an optimization we could use behind the scenes in the future as well,
when named attributes are less common.
For performance, I haven't tested which of the following is better:
```
for each spline combination:
for each attribute:
for each attribute:
for each spline combination:
```
For now I used the existing loop to avoid more threading overhead.
Differential Revision: https://developer.blender.org/D12363
Store the optional temporary span storage as a unique_ptr and move
it in the move constructor, to avoid the need to add a special move
constructor that clears the "show_warning" fields from it. Maybe this
is very slightly slower, but we'll need this class less often in the future
anyway.
"App" is a name reserved for the application templates at the moment.
It may become its own term in the near future if Templates are separated
from "Apps".
So since this is a name not exposed to the users we should renamed it
sooner than later.
Note that this will require scripts to update since the name of the
class is renamed here.
This also requires an update in the User Manual.
Differential Revision: https://developer.blender.org/D12523
With this, asset libraries can be directory structures and all assets in
sub-directories will show up in an Asset Browser.
With complex directory structures and many .blend files inside, asset
library reading will be quite slow for now. There's initial work being
done to introduce indexing for this (T82979), other optimizations are
being discussed as well.
Addresses T91406.
Differential Revision: https://developer.blender.org/D12139
The toggle that allow users to "show" the region (header, toolbar, ...)
when it is collapsed can now be configured for the apps.
Note: This option is not visibile in the UI.
Differential Revision: D12516
This breaks API compatibility. However we are now grouping this setting
in the proper section (preferences.apps), so scripts had to update anyways.
So they may as well do it for the final name.
The reason to remove from the UI is that this is intended for app setup,
and as such it should not be exposed to final users until we have apps
better presented (for 3.1 hopefully).
Differential Revision: D12516
There will be other settings that lock other aspects of the
UI layout (e.g., resizing of editors). So better to name
this setting what it actually handles (the corners).
New name: USER_APP_LOCK_CORNER_SPLIT
Differential Revision: D12516
Add needed extra flag and utils to IDType to mark and check an ID type
as only appendable.
Note that this is only a loose user-level enforcement currently, in any
case you need to be able to link an ID to append it currently, so for
low-level code this does not really matter.
Currently only WorkSpace and Screen ID types are marked with the new
`IDTYPE_FLAGS_ONLY_APPEND` flag.
While likely harmless, this code was doing extremely bad thing,
by-passing the whole lower-level `BKE_lib_id_make_local` call in case it
would fail and deciding by itself to forcefully make the given ID local.
Bad. Very, very, very bad.
Callbacks in IDTypeInfo should never affect other IDs if they are not
embedded.
We break this rule in some cases, at least each of those should be
clearly commented about and get some security checks to try to avoid
unexpected issues as much as possible.
Mixing testing and actual action in a single function is just not a good
way to do things, and the 'testing' feature is not used anywhere
anymore, time to get rid of it.
This flag became a full duplicate of `IDTYPE_FLAGS_NO_LIBLINKING`, which
is a good thing (don't think we ever want to be able to link some data,
without being able to make it local...).
So we can now remove it and use `IDTYPE_FLAGS_NO_LIBLINKING` instead.
Toggling the selection off in the node is the same as muting it,
so exposing it there doesn't help, and makes it less clear that it's
meant to be used as a field.
This moved the spline reversing logic out of the Curve Reverse geometry
node and into the spline class. This allows a spline to reverse itself
with a call to `my_spline.reverse()`
The base class will reverse position, radii & tilt, while specialized
versions are created for Bezier and Nurbs splines to reverse the
additional data that these classes encapsulate.
Differential Revision: https://developer.blender.org/D12501
Essentially, Workspace (and Screen) types were defined as not
localizable.
In previous code it happended to work by mere chance (code path taken in
`BKE_library_make_local` was conviniently skipping the call to
`BKE_lib_id_make_local` in that case, hence not checking for
`IDTYPE_FLAGS_NO_MAKELOCAL` flag of the localized ID type).
This is a total abuse of this IDType flag, for now removing it.
That specific case (IDtype appendable but nor linkable) requires its own
proper flag, this will be tackled in a later commit.
Issue introduced in rB3be5ce4aad5e.
Scene and related pointer parameter can be NULL in link/append code, in
which case there is no instantiation of new objects/collections/obdata.
Link code in blendloader was already checking that, new instantiation
code in WM area from yesterday did not.
Issue introduced by rB3be5ce4aad5e.
Add a method that allows a MutableSpan to reverse itself. This reverses
the data in the original span object. This is a first step in extracting
some functionality from nodes and making it more general.
Differential Revision: https://developer.blender.org/D12485
This commit moves the old material nodes to a "legacy" folder and adds
versions of the nodes that work with fields.
The "Select by Material" node is a field node now, so it doesn't have
a geometry output. This is an improvement because there are fewer links
to connect, and it's more easily usable in different situations.
It's also called "Material Selection", since it's more of an input
than an action now.
It's sometimes necessary to use the attribute capture node to get a
more predictable interpolation to mesh faces. This is because the
selection field input is always evaluated on the face domain, so
attribute inputs are interpolated before they are booleans, so they
cannot use the new interpolations from rB5841f8656d9580d7b9.
Differential Revision: https://developer.blender.org/D12456
The generic domain interpolation algorithms didn't quite work for
selections. The interpolation would do unexpected things that
were different than the results in edit mode. The new behavior
is supposed to be the same as edit mode, although we also have
to handle face corner selections here.
Currently the code assumes that all boolean attributes should be
handled that way. I'm not sure of why that wouldn't be the case,
but if we ever need non-selection boolean attributes, that could
be supported too.
Differential Revision: https://developer.blender.org/D12488
This commits adds a few common flags to `SocketDeclaration`
so that they are available for all socket types (hide label, hide
value, is multi input). This allows porting over the remaining
geometry nodes to the new declaration system.
Furthermore, this commit separates the concepts of the socket
declaration and corresponding builders. The builders are used
by nodes to declare which sockets they have (e.g. `FloatBuilder`).
The ready build socket declarations can then be consumed by
other systems such as the versioning code. Both use cases
need different APIs and those will change for independent reasons,
so it makes sense to separate the classes.
This allows a hack to be removed that temporarily overwrote
the 3D views gizmo display flag.
Also reverse change from fb27a9bb98
that runs poll on modal gizmo groups as there is some risk
that the poll function unlinks the gizmo.
In {rB9cff9f9f5df0} asset_library was renamed → asset_library_ref.
Missed to update this in assets.py.
Differential Revision: https://developer.blender.org/D12497
This adds a new `ParallelMultiFunction` which wraps another multi-function
and evaluates it with multiple threads. The speeds up field evaluation
quite a bit (the effect is most noticeable when the number of evaluations
and the field is large).
There are still other single-threaded performance bottlenecks in field
evaluation that will need to be solved separately. Most notably here
is the process of copying the computed data into the position attribute
in the Set Position node.
Differential Revision: https://developer.blender.org/D12457
Follow up to fix for T73684,
which allowed some modal gizmos to hide all others.
Also resolve an issue from 917a972b56
where shear the shear gizmo would be visible during interaction.
Internally there are some changes to gizmo behavior
- The gizmo with modal interaction wont draw if it's poll function fails.
- The WM_GIZMOGROUPTYPE_DRAW_MODAL_ALL flag now causes these gizmo
groups to draw when another group is being interacted with.
Create dot-dash effect for grease pencil strokes. User can manually edit the length, gap and styles for each segment of dashed lines.
The values in each segment can all be key-framed to make animations.
Reviewed By: Hans Goudey (HooglyBoogly), Antonio Vazquez (antoniov)
Differential Revision: http://developer.blender.org/D11876
This allows crease lines to be automatically hidden on smooth surfaces, also provided options for:
- Showing crease on marked sharp edges.
- Force crease detection on smooth surfaces.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: http://developer.blender.org/D12051
A temporary string was created in the attribute_foreach callback
and used in a map at a higher scope. When the callback finished,
the string went out of scope, was freed, then the elements in the
set pointed to freed memory.
After applying the pose breakdowner,
the "factor" slider in the redo panel wasn't set to the correct value
This would cause the pose to jump around
once you start dragging the slider
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D12187
Ref: D12187
This commit fully refactors the way linked IDs are made local when
appended.
Previously, `BKE_library_make_local` was (ab)used for this task, but it
was missing some contextual data and doing complex processing to try to
work around this, with limited sucess. Further more, it was nearly
impossibe to extend (e.g. to get new append behaviors necessary for the
asset project).
The new code is a dedicated append step in WM linking process.
NOTE: BPY API (`libray.load()` context manager) uses its own code here,
which still relies on `BKE_library_make_local` for appending.
Unfortunately, merging those two different code paths is not trivial so
for now this API will remain unchanged.
Fix T55629: Append already linked Data is impossible.
Current `BKE_libblock_relink_to_newid` is using its own simplistic,
limited and not really correct version of ID remapping.
While doing a full replacement would have been ideal, this is
risky/time-constrained for Blender 3.0 release, so for now we'll have
both versions co-existing.
Previously, it was necessary to rebuild the node declaration
every time it was used. Now it is cached per node for easy
and fast access.
For more details on what this is, look at the comment in
`DNA_node_types.h`.
Differential Revision: https://developer.blender.org/D12471
Previously, a debug name had to be passed to all methods
that added a resource to the `ResourceScope`. The idea was
that this would make it easier to find certain bugs. In reality
I never found this to be useful, and it was mostly annoying.
The thing is, something that is in a resource scope never leaks
(unless the resource scope is not destructed of course).
Removing the name parameter makes the structure easier to use.
Sometimes not all outputs of a multi-function are required by the
caller. In those cases it would be a waste of compute resources
to calculate the unused values anyway. Now, the caller of a
multi-function can specify when a specific output is not used.
The called function can check if an output is unused and may
ignore it. Multi-functions can still computed unused outputs as
before if they don't want to check if a specific output is unused.
The multi-function procedure system has been updated to support
ignored outputs in call instructions. An ignored output just has no
variable assigned to it.
The field system has been updated to generate a multi-function
procedure where unused outputs are ignored.
In contrast to the Filebrowser, the Outliner (Blender File view) did not
distinguish icons for text-based formats (if they have a filepath this
can be done though).
Maniphest Tasks: T90862
Differential Revision: https://developer.blender.org/D12347
This allow users to show/hide:
* Library name / refresh.
* Assets names.
* Filter.
To set them in Python use:
display_options={'NO_NAMES', 'NO_FILTER', 'NO_LIBRARY'}
With contributions by Julian Eisel.
Differential Revision: https://developer.blender.org/D12476
Curve Points of handle of type `Auto` on curves not uniformly scaled
cause the shape of the curve to be modified after applying the scale.
So change these handles to `Aligned` in these cases.
Reviewed By: campbellbarton
Maniphest Tasks: T90736
Differential Revision: https://developer.blender.org/D12281
Changing active side was introduced in {rB7ff6bfd1e0af} but was never
working for tools/operators other than the sculpt line mask tool.
While for most tools/operators this actually does not make sense, the
bisect tool/operator can actually benefit from it.
thx @campbellbarton for additional input!
Maniphest Tasks: T91320
Differential Revision: https://developer.blender.org/D12473
This was implemented in {rB14d56b4217f8} but was never working for
tools/operators other than the sculpt line mask tool.
To be precise, the preview actually snapped but the operations (e.g.
mesh bisect, vertex weight gradient) still happened "unsnapped" in
modal. For the sculpt line mask tool this wasnt a problem, because it
only draws a preview while modal, the actual mask was only applied
later.
This solves part one of T91320 (snapping), sculpting also introduced
flipping in {rB7ff6bfd1e0af} which does not make much sense for all
tools, but in bisect this could actually be supported, will add that in
a separate Diff.
ref T91320
Maniphest Tasks: T91320
Differential Revision: https://developer.blender.org/D12470
* Splash Disable
* Show gizmo navigate
* ui scale
It is a bit arbritrary now. So those are the flags I'm
setting up for the Blender 101 project (T90025).
Differential Revision: https://developer.blender.org/D12474
Introduced `BKE_packedfile_unpack` that is called from the specialized
implementation for Image, Sound, Font, Volume etc. This is in
preparation for T91252.
Instead of comparing the referenced field node by pointer,
compare the nodes directly instead. This is important
because different field nodes might be the same semantically.
rB546314fc9669 broke `svn_libraries_base_url` utils API compatibility
for no good reasons, making new `branch` argument explicitely optional.
Reported on chat by Michael Kowalski (@makowalski), thanks!
Creating some primitives allows for a scale value (via python) that will
scale the object accordingly. For objects with a radius parameter
(like cylinders, spheres, etc.) passing a scale different to (1,1,1)
would result in unexpected behavior.
For example:
`>>> bpy.ops.mesh.primitive_uv_sphere_add(radius=2, scale=(1,1,2))`
We would expect this to create a sphere with a radius of 2
(dimensions 4,4,4) and then be scaled *2 along the z-axis
(dimensions 4,4,8). But this would previously create a scaled sphere
with dimensions (2,2,4).
The scale was simply divided by two. Maybe because the "radius"
parameter for creating the primitives was confusingly named "diameter"
(but used as the radius).
The fix adds a scale parameter to `ED_object_new_primitive_matrix`
and also renames the wrongly named "diameter" parameters to "radius".
Reviewed By: campbellbarton
Maniphest Tasks: T84638
Ref D10093
With this commit, curve objects support the geometry nodes modifier.
Curves objects now evaluate to `CurveEval` unless there was a previous
implicit conversion (tessellating modifiers, mesh modifiers, or the
settings in the curve "Geometry" panel). In the new code, curves are
only considered to be the wire edges-- any generated surface is a mesh
instead, stored in the evaluated geometry set.
The consolidation of concepts mentioned above allows remove a lot of
code that had to do with maintaining the `DispList` type temporarily
for modifiers and rendering. Instead, render engines see a separate
object for the mesh from the mesh geometry component, and when the
curve object evaluates to a curve, the `CurveEval` is always used for
drawing wire edges.
However, currently the `DispList` type is still maintained and used as
an intermediate step in implicit mesh conversion. In the future, more
uses of it could be changed to use `CurveEval` and `Mesh` instead.
This is mostly not changed behavior, it is just a formalization of
existing logic after recent fixes for 2.8 versions last year and two
years ago. Also, in the future more functionality can be converted
to nodes, removing cases of implicit conversions. For more discussion
on that topic, see T89676.
The `use_fill_deform` option is removed. It has not worked properly
since 2.62, and the choice for filling a curve before or after
deformation will work much better and be clearer with a node system.
Applying the geometry nodes modifier to generate a curve is not
implemented with this commit, so applying the modifier won't work
at all. This is a separate technical challenge, and should be solved
in a separate step.
Differential Revision: https://developer.blender.org/D11597
Calms warning for unused variable in `constraint_copy_to_selected_poll`
by using UNUSED_VARS.
See D12453 for further details
Differential Revision: https://developer.blender.org/D12453
Reviewed by Campbell Barton
Since fields were committed to master, socket inspection did
not work correctly for all socket types anymore. Now the same
functionality as before is back. Furthermore, fields that depend
on some input will now show the inputs in the socket inspection.
I added support for evaluating constant fields more immediately.
This has the benefit that the same constant field is not evaluated
more than once. It also helps with making the field independent
of the multi-functions that it uses. We might still want to change
the ownership handling for the multi-functions of nodes a bit,
but that can be done separately.
Differential Revision: https://developer.blender.org/D12444
Now an instruction knows the cursors where it is inserted instead
of just the instruction that references it. This has two benefits:
* An instruction knows when it is the entry instruction.
* The cursor can contain more information, e.g. if it is linked to the
true or false branch of a branch instruction.
This also simplifies updating the procedure in future optimization
passes.
Mostly renaming the variables to improve line wrapping.
But also the "foreach_attribute" loops look simpler now.
Also use `Spline::copy_base_settings` and don't bother
with an extra call to reallocate the attribute arrays.
Just like the curve to points node, this mode outputs point locations
based on the input curve's evaluated points (the points you see in the
viewport). This is expected to be faster, since it doesn't have to
sample equal positions on the result, and it's also consistent with
the existing choices in the curve to points node.
Improvements to Quad View options' titles and descriptions.
See D12381 for more details.
Differential Revision: https://developer.blender.org/D12381
Reviewed by Hans Goudey and Campbell Barton
rBe2f99c338bd57 should have used the subversion currently defined
in Blender, instead it used one lower, so some files didn't have the
versioning applied.
It appears an old version of this file was committed by accident. The
intended change to remove sculpt layers was done in versioning code and
does not require a modified startup.blend.
Flag the changed object and its bones to update after moving a
constraint in the stack up or down. The two operators for move up and
move down seem to be unused, but I notices they had the same problem, so
I added the update there as well.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D12174
Refactor of our Vfont check for font validity.
See D12068 for further details.
Differential Revision: https://developer.blender.org/D12068
Reviewed by Campbell Barton
Recently we have decided to avoid fancier versioning for nodes with
string inputs for attribute names when updating the attribute workflow
for 3.0. In that case we would just duplicate any node that will
have an updated version to work with fields.
We want to be able to use the "proper" ID names for the new versions
of the nodes though, so this patch adds "Legacy" to the IDs of all
nodes that will be replaced in 3.0. This commit also removes the nodes
from the add menu when the fields experimental preference is enabled,
in order to make it clear what has been updated and what hasn't.
Nodes in the "Maybe" categories in versioning_300.c can be renamed
later if necessary. For now it's probably better to be conservative,
and to keep the list complete.
Differential Revision: https://developer.blender.org/D12420
Previously fluid simulation and Alembic modifiers had a dedicated function
to query the velocity for motion blur. Now use a more generic system where
those modifiers output a velocity attribute.
Advantages:
* Geometry and particle nodes can output velocity through the same mechanism,
or read the attribute coming from earlier modifiers.
* The velocity can be preserved through modifiers like subdivision surface or
auto smooth.
* USD and Alembic previously only output velocity from fluid simulation, now
they work with velocity from other sources too.
* Simplifies the code for renderers like Cycles and exporters like
Alembic and USD.
This breaks compatibility:
* External renderers and exporters accessing these velocities through the
Python API now need to use the attribute instead.
* Existing modifier node setups that create an attribute named "velocity"
will render differently with motion blur.
Differential Revision: https://developer.blender.org/D12305
Use `_PyThreadState_UncheckedGet()` to check that the current thread is
tracked by Python before checking whether it has the GIL. The latter
will abort when the former is false.
For some reason the asset preview isn't created or loaded correctly in
some instances. This could be addressed with D9974, but hard to tell
since I only have a failing .blend file, no steps to recreate it from
scratch.
Would crash when opening an Asset Browser, selecting an object asset
(that has an invalid preview stored) and opening the Asset Browser
sidebar, so that the preview is visible there.
This enabled multithreaded building of the keys that needs to be drawn
in the timeline (and other action editors).
On an AMD Ryzen 3800 using a mocap data test file (available in patch)
the performance went from 2fps to 8fps. The performance increase depends
on the number of rows of keyframes that is shown in for example the
timeline editor.
Each row will be using a different thread. Currently the bottleneck is
the summary channel that we could split up in the future even more (
although that is a complex refactoring work).
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D12198
This patch adds new Perlin noise functions to BLI. The noises are compatible
with the shading texture noises in EEVEE, SVM, and OSL.
The existing Jenkins hash functions couldn't be used because they are not
compatible with the shading implementations and an attempt at adjusting the
implementation will break compatibility in various areas of Blender. So the
simplest approach is to reimplement the relevant hashing functions inside the
noise module itself.
Additionally, this patch also adds a minimal float4 structure to use in the
interface of the noise functions.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D12443
Change data structure of keylists. Reducing the balancing overhead and therefore increases performance.
| **Function** | **Master** | **Patch** |
|`draw_summary_channel`| 0.202105s| 0.083874s |
When adding items to the keylist it will store it in a linked list. This linked list is
accompanied with the length (key_len) and a `last_accessed_column`. last_accessed_column is a cursor
that improve the performance when adding new items as they are mostly ordered by frame numbers.
last_accessed_column is reset when a new fcurve/mask/... is added to the keylist.
Before searching or array access. the listbase needs to be converted to an array.
`ED_keylist_prepare_for_direct_access`. After that the caller can use
`ED_keylist_find_*` or `ED_keylist_array*` functions.
The internal array can also be accessed via the `ED_keylist_listbase` function.
The items inside the array link to the previous/next item in the list.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D12052
Evaluating the dependency graph potentially executes Python code when
evaluating drivers. In specific situations (see T91046) this could
deadlock Blender entirely. Temporarily releasing the GIL when evaluating
the depsgraph resolves this.
This is an improved version of
rBfc460351170478e712740ae1917a2e24803eba3b, thanks @brecht for the diff!
Manifest task: T91046
Changed doc string for Blender `--addons` command line argument
to explain what it does rather than just describing what it expects.
Reviewed By: Blendify
Ref D12445
Addresses T76082.
Since the DirectX backend does not work for AMD gpus
(wglDXRegisterObjectNV() fails to register the shared OpenGL-DirectX
render buffer, displaying a pink screen to the user), the original
solution was to use SteamVR's OpenGL backend, which, as tested
recently, seems to work without any issues on AMD hardware.
However, the SteamVR OpenGL backend (on Windows) was disabled in
fe492d922d since it resulted in crashes with NVIDIA gpus (and still
crashes, as tested recently), so SteamVR would always use the
AMD-incompatible DirectX backend (on Windows).
This patch restores use of the SteamVR OpenGL backend for non-NVIDIA
(AMD, etc.) gpus while maintaining the DirectX workaround for NVIDIA
gpus. In this way, issues are still resolved on the NVIDIA side but
AMD users can once again use the SteamVR runtime, which may be their
only viable option of using Blender in VR.
Reviewed By: Julian Eisel
Differential Revision: https://developer.blender.org/D12409
VS2019 had a compiler update moving it into the
range that was used to detect VS2022. This patch
updates the detection to the current VS2022
preview compiler version.
Reported by Jesse Y on chat.
With D12436 two File Browser properties were renamed but two references
not changed in space_filebrowser.py
See D12449 for details.
Differential Revision: https://developer.blender.org/D12449
Reviewed by Hans Goudey
It is causing crashes in rendering, when releasing the GIL in render threads
while the main thread is holding it.
Ref T91046
This reverts commit fc46035117.
Preferences / File Browser section made less confusing.
See D12436 for details and comparisons.
Differential Revision: https://developer.blender.org/D12436
Reviewed by Campbell Barton and Julian Eisel
Reuse temporary windows when they share the same single area type, not
because they share the same title.
See D12401 for more details.
Differential Revision: https://developer.blender.org/D12401
Reviewed by Campbell Barton
This commit allows connecting color sockets to the group input and
changing the input values in the modifier. Before there was an error
since this was more complicated to support with the previous IDProperty
UI data storage method.
Differential Revision: https://developer.blender.org/D12437
This adds support for two Varjo specific OpenXR vendor extensions:
1) XR_VARJO_QUAD_VIEWS
2) XR_VARJO_FOVEATED_RENDERING
Together these enable human eye resolution rendering on supported
devices (currently mainly Varjo XR-3 and VR-3).
In addition, there's a detection for Varjo OpenXR runtime.
This has been tested on real Varjo XR-3 hardware and Varjo Simulator
and confirmed to function correctly. Foveation works, and the views are
rendered correctly for all the four views.
Reviewed By: Peter Kim, Julian Eisel
Differential Revision: https://developer.blender.org/D12229
Evaluating the dependency graph potentially executes Python code when
evaluating drivers. In specific situations (see T91046) this could deadlock
Blender entirely. Temporarily releasing the GIL when evaluating the depsgraph
resolves this.
Calling the `BPy_BEGIN_ALLOW_THREADS` macro is relatively safe, as it's
a no-op when the current thread does not have the GIL.
Developed in collaboration with @sergey
Manifest task: T91046
This implements the initial core framework for fields and anonymous
attributes (also see T91274).
The new functionality is hidden behind the "Geometry Nodes Fields"
feature flag. When enabled in the user preferences, the following
new nodes become available: `Position`, `Index`, `Normal`,
`Set Position` and `Attribute Capture`.
Socket inspection has not been updated to work with fields yet.
Besides these changes at the user level, this patch contains the
ground work for:
* building and evaluating fields at run-time (`FN_fields.hh`) and
* creating and accessing anonymous attributes on geometry
(`BKE_anonymous_attribute.h`).
For evaluating fields we use a new so called multi-function procedure
(`FN_multi_function_procedure.hh`). It allows composing multi-functions
in arbitrary ways and supports efficient evaluation as is required by
fields. See `FN_multi_function_procedure.hh` for more details on how
this evaluation mechanism can be used.
A new `AttributeIDRef` has been added which allows handling named
and anonymous attributes in the same way in many places.
Hans and I worked on this patch together.
Differential Revision: https://developer.blender.org/D12414
rB8cc3d2d6f51f introduced option to force make_local code to either copy
or actually make a linked ID local, but logic of boolean options
handling was broken.
This commit simplifies logic here and fixes the issue.
NOTE: Since those new options were not used yet this was a harmless bug.
Mistake in {rB459974896228}.
To use Object Fonts, (vertex) instancing needs to be enabled.
So bring back the instancing panel and improve the instancing choice
(similar to rB6c0c766bcaa0) by just giving the 'Vertex' choice (or
'None') and explain this is only used for Object Fonts on characters.
Was reported in D11348 itself.
Differential Revision: https://developer.blender.org/D12438
Seems like an oversight in {rB86635402d516}?
Stumbled over this while investigating another report, but this line in
its current form does not make sense (was taking derivedFinal - not
derivedDeform - prior so I assume this has to be
BKE_object_get_evaluated_mesh now).
(it is now only used for vertex parenting where this should not be an
issue, but best keep this generic).
Differential Revision: https://developer.blender.org/D12425
View operations that left the cursor over a gizmo were not being updated
because the mouse-move event was added while the view was animated
instead of once the animation had completed.
Mouse-move events were also missing when smooth-view was disabled.
This fixes a glitch with the 3D view navigation gizmo where multiple
clicks on the view aligned axis failed to switch to the opposite side
unless the user moved the cursor between clicks.
Allow blending the imported cache with the modifiers stack above the
MeshCache modifier.
This is particularly useful for instance when dealing with cloth
simulations performed in another software, where some parts of the cloth
are completely pinned (non-simulated, following the armature). Indeed,
this would allow modifying the animation in some areas without having to
rebake the other parts or the cloth, resulting in a much more flexible
workflow.
Reviewed By: #modeling, campbellbarton, mont29
Ref D9898
The panning angle allows a more intuitive panning when the output is
surround sound. It sets the angle on the horizontal plane around the
listener. 0 degrees is to the front, negative values go to the left and
positive ones to the right. +/-180 degrees is directly from the back.
Technical detail: the panning value is linear with the panning angle
with a factor of 90 degrees. For stereo this means that -1 is left and
+1 right, since the speakers are exactly 90 degrees to either side.
Differential Revision: https://developer.blender.org/D12275
* Make "run" command (re-)run all tests, add "update" command to only
run queued and outdated tests equivalent to the old "run" command.
* Support specifying environment variables for revisions, to easily
compare multiple parameter values.
* Better sorting of revisions in graph.
Improve texture painting/uv editing performance when limited scale is active.
Cause of the slow down is that the image editor draws the image in maximum resolution,
but the 3d viewport uses the limited scale. The variation reuses the same GPU texture
and needed to be uploaded/scaled twice to the GPU.
This patch will adds texture slots that can hold the scaled down and the maximum
resolution image. This would allow better cache hits and reuse of existing caches.
Maximum resolution textures are reused for limited scale when they fit to reduce memory
and CPU footprint.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D12388
This patch allows dropping material assets from material slot under the mouse
cursor. Before this change the material slot had to be hand-picked from the
properties panel.
For consistency it is chosen to do this in any shading mode as the tooltip shows
what is exactly going to happen during release.
The feature also works for other object types than Meshes as it uses the drawn surface on the
GPU to detect the material slots. Performance of this patch has been tested with AMD GCN3.0
cards and are very responsive.
Reviewed By: fclem, Severin
Differential Revision: https://developer.blender.org/D12190
Caused by {rB3e4d720ae483}.
Before above commit, this had a different path handling and
RNA_path_from_ID_to_struct() was always used [which kind of took care of
this]. Now this is only used if ptr represents an ID itself, so we are
"loosing" part of the path.
This patch adds the path back on the member_id in
wm_context_member_from_ptr() for everthing related to space_data, so
WM_context_path_resolve_property_full() can construct a full path even
for these.
Maniphest Tasks: T91225
Differential Revision: https://developer.blender.org/D12418
In e6a1d488ab `deselect_all` property was removed from
`sequencer.select` operator but some keymap items were missed, which was
caught by tests by buildbot.
Operator combines more features and it wasn't very transparent which
properties are used in which feature and how they are used.
Features linked_time, side_of_frame and linked_handle are
isolated, logic moved into own function.
deselect_all property was removed as it practically equals to
!extend in all cases.
Functional change: Dragging existing selection will not change active
strip. Previously this could happen if click happened on strip that
wasn't active.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12320
Even if `snap_targets` `SeqCollection` is empty, there can be static
snap points defined, so don't condition snapping on non-zero target
count.
Differential Revision: https://developer.blender.org/D12400
This patch implements the generic slider from
`ed_draw.c` to the `GRAPH_OT_decimate` operator
This draws a useful UI and enables precision mode and stepping
Overshoot is disabled
The status message is moved to the workspace footer
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D9361
Ref: D9361
Caused by {rB5a9a16334c57}
Linking/appending an asset made from a collection containing certain
types of objects lacking bounding boxes (camera, light) would crash.
Add simple bbox check to prevent the crash.
Maniphest Tasks: T91236
Differential Revision: https://developer.blender.org/D12415
This is to be used when calling code already knows whether the 'made
local' linked ID should be copied, or can directly be converted to a
local one.
Currently unused , this is preparation for rewrite of append code.
This patch just changes the mouse cursor to a "stop sign" when dragging
to an unsupported location during Join or Split operations.
See D11396 for details and examples.
Differential Revision: https://developer.blender.org/D11396
Reviewed by Campbell Barton
Previously, the Point Instance node in geometry nodes could only instance
existing objects or collections. The reason was that large parts of Blender
worked under the assumption that objects are the main unit of instancing.
Now we also want to instance geometry within an object, so a slightly larger
refactor was necessary.
This should not affect files that do not use the new kind of instances.
The main change is a redefinition of what "instanced data" is. Now, an
instances is a cow-object + object-data (the geometry). This can be nicely
seen in `struct DupliObject`. This allows the same object to generate
multiple geometries of different types which can be instanced individually.
A nice side effect of this refactor is that having multiple geometry components
is not a special case in the depsgraph object iterator anymore, because those
components are integrated with the `DupliObject` system.
Unfortunately, different systems that work with instances in Blender (e.g.
render engines and exporters) often work under the assumption that objects are
the main unit of instancing. So those have to be updated as well to be able to
handle the new instances. This patch updates Cycles, EEVEE and other viewport
engines. Exporters have not been updated yet. Some minimal (not master-ready)
changes to update the obj and alembic exporters can be found in P2336 and P2335.
Different file formats may want to handle these new instances in different ways.
For users, the only thing that changed is that the Point Instance node now
has a geometry mode.
This also fixes T88454.
Differential Revision: https://developer.blender.org/D11841
Some GPU's have support for compute shaders, but don't support
GLSL 4.3. This resulted in compiler errors and crashes.
This issue could have been solved by supporting older GLSL languages but
that would have been a hassle to get it right. We already have a
fallback in place for GPU's that don't support compute shaders at all.
When rendering the test scene in T79190 which has only emissive surfaces a division by zero occurs. This is a simple patch to remove this.
Reviewed By: brecht
Maniphest Tasks: T79190
Differential Revision: https://developer.blender.org/D11682
This adds an option to use a capture of the entire main window as the
blend file preview thumbnail.
See D10492 for details and examples.
Differential Revision: https://developer.blender.org/D10492
Reviewed by Campbell Barton
Increase effective resolution of blend preview images from 128x128 to
256x256 for versions saved in the file system thumbnail cache.
See D10491 for details and examples.
Differential Revision: https://developer.blender.org/D10491
Reviewed by Campbell Barton
I remember when we originally decided on the Dimensions panel,
one of the reasons we combined time and image size properties in the same panel,
was simply because the 2.49 and previous UIs used fixed-size panels,
so we often put two categories of properties inside a panel, using two columns.
Now that we no longer do this, we could clarify and simplify some panels
by splitting them, such as the Output > Dimensions panel
{F6753690}
Reviewed By: brecht, pablovazquez
Differential Revision: https://developer.blender.org/D4440
The posterize node limits the number of colors per channel.
This is useful to generate masks or to generate stylized images
Both the tiled and full-frame implementation are included in this patch
{F10314012}
Reviewed By: manzanilla, jbakker
Differential Revision: https://developer.blender.org/D12304
Some operations can take a lot of time to execute and
any duplication should be avoided.
This patch implements a compile step that detects
operations with the same type, inputs and parameters that
produce the same result and merge them. Now operations
can generate a hash that represents their output result. They only
need to implement `hash_output_params` and hash any parameter
that affects the output result.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12341
Adds full frame implementation to Map Range, Map Value, Normal and
Normalize nodes. The other nodes in "Vector" sub-menu are submitted
separately.
Part of T88150.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12233
Adds full frame implementation to Anti-Aliasing, Defocus, Denoise,
Despeckle, Dilate/Erode, Directional Blur, Filter, Inpaint and
Vector Blur nodes. The other nodes in "Filter" sub-menu are
submitted separately.
Part of T88150.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12219
Screen area maintenance "Close" function allowed to be scripted.
See D12307 for usage example.
Differential Revision: https://developer.blender.org/D12307
Reviewed by Campbell Barton
Fixes the regression introduces in rB29f3af952725 . The subdivision modifier used to work on two point strokes with simple mode but not with catmul clark. Now it will work with simple mode and in case of catmull clark mode it will still use simple mode on these strokes.
Differential Revision: https://developer.blender.org/D12397
This changes the search for unprocessed faces to only search
from the previously found face. Local testing on 1.5 million
triangle meshes gives a 75x speedup
(of the code affected, which is the first half of the work).
The former code would traverse all faces of a mesh until a face was
found that had not been processed. This ended up being slow mainly
because it had to load face-data to determine the state of the flag.
Secondarily, the way it iterated and marked the mesh, it would end up
traversing all previously processed faces to find and unprocessed one.
The same optimization has been made for edge-group calculation.
Reviewed By: campbellbarton
Ref D12379
Support extracting identifiers RNA paths into fixed size buffer
since the maximum size of the identifier is known all cases.
- Add BLI_str_unescape_ex to support limiting the destination buffer.
- Add BLI_str_quoted_substr to copy values into a fixed size buffer.
Previously I thought I fixed this by reversing the face corner indices
in quads created by the curve to mesh node. But then we fixed a problem
with the transforms used in that node by inverting one of their
components, so the required direction also reversed. This commit
reverts rBcf28398471c84 and reverses the default direction of the
quadrilateral primitive so it's the same as the others.
Tests will be updated.
Allow the UDIM grid to be shown and adjusted when there are images
loaded in UV edit mode. Right now the grid feature disappears once an
image is loaded and many have found this to be confusing.
Based on community and artist feedback, there was support to change this
behavior[1]
This patch does the following:
- Allows the grid to be shown even when images are present
- The max allowable dimensions for the grid has been increased from
10x10 to 10x100 to match the underlying maximum UDIM range that blender
supports
Note: This should not affect other Image editor modes like Paint/Mask or
the Render Result viewer etc. Future work in this area is currently
documented in a dedicated design task[2]
[1] https://devtalk.blender.org/t/the-udim-tile-grid-design-and-feedback-thread/20136
[2] https://developer.blender.org/T90913
Differential Revision: https://developer.blender.org/D11860
- lower to warning (might be debatable, but this is not really
malfunctioning and e.g. constraints/modifiers dont spit out errors if
targets are not specified)
- clarify _what_ of the two actualy does not exist
ref. T91101
Maniphest Tasks: T91101
Differential Revision: https://developer.blender.org/D12389
Clearing the Parent Bone field in relations would result in something
like this:
```
add_relation(Bone Parent) - Could not find op_from
(ComponentKey(OBArmature, BONE))
add_relation(Bone Parent) - Failed, but op_to (ComponentKey(OBEmpty,
TRANSFORM)) was ok
ERROR (bke.object): /source/blender/blenkernel/intern\object.c:3330
ob_parbone: Object Empty with Bone parent: bone doesn't exist
```
Now skip creation of a depsgraph relation if the Parent Bone field is
empty (since this would be invalid anyways).
ref. T91101
Maniphest Tasks: T91101
Differential Revision: https://developer.blender.org/D12389
This patch fixes the issue described in T88411, that the text in frame nodes is only shown, when the node has a label. This has been caused by rB8f04ddbbc626, because `node_draw_frame_label` not only draws the label, but also all the other text. Therefore skipping it, when the label is empty, also skips drawing the other text.
This is fixed by moving the check for the empty label into `node_frame_draw_label`.
**Patch:** Frame nodes show text despite not having a label.
{F10286204, size = full}
**Same setup in master:**
{F10128099, size = full}
**Test file**
{F10128102}
Reviewed By: #user_interface, pablovazquez
Maniphest Tasks: T88411
Differential Revision: https://developer.blender.org/D11315
When joining two strokes in paint mode using the auto merge option, the join was very hard if the thickness was too different.
This patch adds a smooth to the join in order to get better transition.
Also fixed the problem to join existing strokes very far from actual stroke.
Some cleanup and rename of old code is included in order to make code more readable.
Reviewed By: pepeland
Differential Revision: https://developer.blender.org/D12362
- Split rna_path_token in two,
extracting bracket handling into it's own function.
- Only handle escape characters for quoted tokens.
Numbers were copied using BLI_str_unescape which is unnecessary.
- Extract text without without quotes,
use a return argument so the caller can tell if the token was quoted.
This avoids having to strip the tokens quotes afterwards.
Needed for studio sprite-fright frozen branch.
Also do not overwrite branch for git sub-modules when it is defined, and
fallback to `master` branch in case specified branch is not found in a
specific sub-repository.
Adding a mirror modifier in edit-mode crashed.
Freeing meshes that hold a shallow copy happens in multiple places
while calculating modifiers, making it impractical to clear the
edit-mode pointer before freeing the mesh (as done in
BKE_editmesh_free_derived_caches).
Add a struct member to the edit-mesh struct so evaluated copies
don't free the edit-mesh contents.
No longer free the edit-mesh pointer while in edit-mode since this
isn't reliable to keep the object in edit-mode while freeing it's
edit-mesh data.
Users who want to exit edit-mode should do so explicitly.
Caused by 6d2f9b1dfa.
Freeing the edit-mesh pointer wasn't free the edit-mesh data it's self.
Unlinking from the outliner or through the Python API leaked memory.
This didn't often cause leaks in practice since ED_editors_exit
exits edit-mode for all objects.
Now freeing mesh data frees the edit-mode data as well,
this matches the behavior of other object types that support edit-mode.
The new API introduced in rB1e69a25043120c provides a shorted, more
flexibly way to declare node socket inputs and outputs. This commit
updates all geometry nodes to use the `NodeSocketBuilder` API, except
the four nodes that need `SOCK_HIDE_VALUE` or `SOCK_MULTI_INPUT`.
Differential Revisions: D12377, D12376, D12374, D12373, D12372
Failure to calculate normals caused an assertion since face
tessellation was being calculated with invalid normals.
In practice the rip-drag action would recalculate normals anyway,
however mesh tessellation should always be performed with valid normals.
This commit fixes the custom property edit operator for the the case of
editing group properties. Currently this isn't supported very well, the
data is converted to a string, but the operator shouldn't fail anyway.
This allows editing properties created like this:
C.object['abuse'] = {'parent' : ['child1', 'child2']}
These changes reflect some issues with the design of the operator.
Requiring guessing the type of the data does not work well at all, and
makes code more complicated. In the future this operator can be updated
to use a type drop-down.
Differential Revision: https://developer.blender.org/D12364
Since recently it's possible to query the active file (as object, not
just the name), but it's quite useful for scripting to have access to
all selected files.
This introduces `bpy.context.selected_files`, returning a list of file
objects representing files in the File Browser.
There were requests to be able to track the file selection in the File
Browser. Just using the file name for that wouldn't if the file browser
has the recursive display enabled. File names could be duplicated then.
So expose the entire path relative to the currently displayed directory.
Use BLI_str_quoted_substr_range instead of in-line
quote extraction to resolve:
- Bone names containing quotes caused flip to fail.
- Missing NULL check if a matching quote could not be found.
This is a similar funciton to BLI_str_quoted_substrN
that extracts the range of the quoted string
instead of allocating a new string un-escaped string.
Assigning a new value to an IDProperty with the Python API would free
the entire contents of the existing property, which unfortunately
happened to include the UI data. The fix is to extract the UI data from
the existing property before freeing its contents. An alternative
would be adding another argument to `IDP_FreePropertyContent_ex`, but
this solution is clearer and doesn't increase complexity elsewhere.
When the same stroke was used as a driver variable, this could make this
stroke already tagged as built in the course of building driver
variables (via `build_gpencil`), but then important stuff from
`build_object_data_geometry_datablock` could be missed later on (because
both of these funtions use `checkIsBuiltAndTag`). Most importantly,
setting up operations such as GEOMETRY_EVAL would be skipped entirely.
`build_object_data_geometry_datablock` seems to cover greasepencil just
fine (does the same as `build_gpencil` and more). Proposed solution is to
remove `build_gpencil` entirely. In `build_id` it would then also call
`build_object_data_geometry_datablock` for `ID_GD` IDs. Now the covered
types that _call_ `build_object_data_geometry_datablock` match exactly
to what is covered _inside_ `build_object_data_geometry_datablock`.
Think this "duplication" of functionality was just overseen in
rB66da2f537ae8 [`build_gpencil` existed long before and said commit made
greasepencil a real object with geometry and such].
thx @JacquesLucke for additional input!
Maniphest Tasks: T88433
Differential Revision: https://developer.blender.org/D12324
All props of annotations are not animatable by design and opacity must be equal.
As the opacity is reused by gpencil objects, a new prop has been created in order to use different props for annotations and GP objects.
Image Editor
When changing to another texture paint slot, the texture displayed in
the viewport changes accordingly (as well as the image displayed
in the Image Editor).
When changing the active texture in the Node Editor though, only the
texture displayed in the viewport changes.
This was mentioned in T88788 and I am not 100% sure this is desired in
all scenarios (or at all), it should be seen in tandem of D11497. This
change makes it so that the Image Editor changes to the image we changed
to in the Node Editor (keeping them in sync).
If this is not desired in all cases, this could be made an option.
ref T88788
ref D11496
ref D11497
Maniphest Tasks: T88788
Differential Revision: https://developer.blender.org/D11498
active paint slot
When changing to another texture paint slot, the texture displayed in
the viewport changes accordingly (as well as the image displayed
in the Image Editor).
When changing the active texture in the Node Editor though, only the
texture displayed in the viewport changes.
This _can_ be confusing because you can end up painting on a texture
that you are not looking at in the viewport (so you dont have any
feedback whatsoever). Not 100% sure this is desired in all scenarios,
but this change makes it so that the active paint slot changes to the
one that uses the texture we chaged to in the Node Editor (keeping them
in sync).
If this is not desired in all cases, this could be made an option.
ref T88788
ref D11496
Maniphest Tasks: T88788
Differential Revision: https://developer.blender.org/D11497
Caused by {rBf3bf87e5887c}.
When using a GPencil Time Offset Modifier, the bGPDlayer>actframe can be
NULL. This can be determined though, but above optimization commit
skipped getting the active frame in this case entirely (with the
intention to only get it if framenumbers did not match).
Now also call BKE_gpencil_layer_frame_get() if actframe is NULL in order
to fetch a valid one if present.
Maniphest Tasks: T91060
Differential Revision: https://developer.blender.org/D12355
Run into it when was re-working tiles in the Cycles X project.
Make sure the storage of highlighted tiles is emptied when the
render is finished or cancelled).
The error is only possible to happen if the engine did not do
something correct, but is still good to deal with such situations
more gracefully.
Steps to reproduce:
- enable Extended Asset Browser
- open a regular File Browser
gives:
"rna_uiItemR: property not found: FileSelectParams.asset_category"
Now do proper poll.
Differential Revision: https://developer.blender.org/D12350
When the object display type was set to wireframe or boundbox the depth
buffer wasn't updated resulting in not visible weightpaint overlay.
Thanks to Demeter Dzadik for mentioning it.
Support axis constraints for the measure tool.
Press X, Y or Z to restrict the dimension to that axis,
it's also possible to toggle between orientations matching transform.
Reviewed By: campbellbarton
Ref D10872
This commit fixes editing the value of a list of strings custom property
with the "Custom Property Edit" operator. This sort of custom property
isn't very well supported in general, but editing the values should
work properly anyway.
Differential Revision: https://developer.blender.org/D12348
Use context members instead of not working well or failing due to:
- Missing "path" functions (in the case of edit-bones).
- Paths containing names (in the case of sequence-strips or pose-bones).
While technically correct it's not useful for shortcuts or
menu items to lookup data by name.
Only append RNA_path_from_ID_to_struct to context attributes if those
paths resolve to ID types.
Also simplify creating RNA paths by adding utility functions:
- WM_context_path_resolve_property_full
- WM_context_path_resolve_full
Part of fix for T90723.
Selection was already accessible but not active.
Add utility functions:
- ANIM_nla_context_track to access the active track,
following the convention of ANIM_nla_context_strip.
- ANIM_nla_context_*_ptr versions of these functions,
needed to for creating context members to access the ID pointer.
Part of fix for T90723.
Math implemented in 929d7597b3 was incorrect, but also inconsistent
with previous behavior.
`SEQ_SPEED_STRETCH` should change length only when right handle is
moved. This is now documented in code.
API function `move_to_meta` should move strips without changing context
data like `MetaStack` that tells UI which meta strip should be
displayed and operated upon.
`SEQ_time_update_sequence` relied on `MetaStack` to update meta strip
content length. Instead of changing function `SEQ_time_update_sequence`,
use function `SEQ_time_update_meta_strip_range` directly. This is
because caller would have to be aware of parent meta strip that needs
update anyway.
This is an alternative to context.scene.sequence_editor.active_strip
which could be verbose, especially with additional None checks.
Part of fix for T90723, extracted from D12297.
Previously, built-in nodes had to implement "socket templates"
(`bNodeSocketTemplate`) to tell Blender which sockets they have.
It was nice that this was declarative, but this approach was way
too rigid and was cumbersome to use in many cases.
This commit starts to move us away from this rigid structure
by letting nodes implement a function that declares the sockets
the node has. Right now this is used as a direct replacement
of the "socket template" approach to keep the refactor smaller.
It's just a bit easier to read and write.
In the future we want to support more complex features like
dynamic numbers of sockets and type inferencing. Those features
will be easier to build on this new approach.
This new approach can live side by side with `bNodeSocketTemplate`
for a while. That makes it easier to update nodes one by one.
Note: In `bNodeSocketTemplate` socket identifiers were made
unique automatically. In this new approach, one has to specify
unique identifiers manually (unless the name is unique already).
Differential Revision: https://developer.blender.org/D12335
Now if the frame does not exist in destination layer, the frame type of merge layer is used.
For existing frames in destination layer, the existing type is not changed.
This node takes a curve geometry input and creates a filled mesh at Z=0
using a constrained Delaunay triangulation algorithm. Because of the
choice of algorithm, the results should be higher quality than the
filling for 2D curve objects.
This commit adds an initial fairly simple version of the node, but more
features may be added in the future, like transferring attributes when
necessary, or an index attribute input to break up the calculations
into smaller chunks to improve performance.
Differential Revision: https://developer.blender.org/D11846
This mesh primitive enhances the Cube mesh primitive and allows the
creation of a cuboid with a configurable size and number of vertices
in all 3 directions. The Cube primitive is now similar to the Grid
primitive except that it works in 3 dimensions.
Previously it was possible to create a cube and scale it arbitrarily
along each axis. You could also subdivide the mesh, but the number of
subdivisions was equal along all axes. This meant that making the basic
frame for something like modular buildings wasn't trivial.
Inspired by tutorials and files for modular building creation.
The cuboid is created as a `Mesh` so that large meshes with millions of
faces are created quickly. Though edge calculation could be faster if
implemented here, edges are calculated using `BKE_mesh_calc_edges`
to reduce complexity, and in hopes that they may be calculated lazily
for `Mesh` in the future like vertex normals.
See the differential revision for more information.
Differential Revision: https://developer.blender.org/D11810
This commit allows setting the number of vertices in either direction
to 1, so that the primitive grid node will create a line instead of a
grid. To avoid confusion the soft limits of the input sockets are not
changed, so this is purely an increase in flexibility for when it is
helpful.
Differential Revision: https://developer.blender.org/D11772
The outer edges created om the circle mesh primitive node
weren't marked with the flags that makes them show in wireframe
mode.
Differential Revision: https://developer.blender.org/D12152
The code was writing relative to the test_release_dir flag,
but this didn't make a lot of sense.
Better to use Blender's tempdir mechanism, though since Blender
isn't fully initialized when using it for gtests, we have
to call the function to initialize the tempdir.
This function was documented to return the length but returned an
error value for WIN32. While this doesn't cause any bugs at the moment,
it could cause problems in the future.
Oversight in 5496d8cd36.
Besides helping to avoid buffer overflow errors this reduces complexity
of BLI_str_utf32_as_utf8 which needed a special loop for the last 6
characters to avoid writing past the buffer bounds.
Also add BLI_str_utf8_from_unicode_len which only returns the length.
This was added in b24712a9ca
but is no longer needed as of efc129bc82.
Further, this wasn't reliable as it could fail on linked library data
which has a different base directory.
Assert when blend file relative paths are passed to BLF
(matching imbuf file loading).
The default float IDProperty min value rB8b9a3b94fc148d19 for when there
is no UI data was FLT_MIN instead of -FLT_MAX, which meant that animated
custom property values couldn't be less than zero unless they had their
UI data values edited previously.
That's a mistake I won't make again! Also change the int minimums from
-INT_MAX to INT_MIN to sanitize the whole situation.
This patch just clamps and rounds node contents and socket locations
so they don't appear to jiggle around when you move them. This issue
happens because node sizing and positioning are in floats while text
content must be pixel-aligned.
See D11684 for more details and comparisons.
Differential Revision: https://developer.blender.org/D11684
Reviewed by Julian Eisel
The overlay was drawn twice on top of each other making it hard to see,
hard to theme, and making it more prominent in the wrong areas (before
frame 0, not even start frame). The comment in the code was also wrong
since it said "frame one" but it was 0.
Checked with the Animation module team that it's better to use start/end
frame range instead of frame 0.
There is a TODO note to de-duplicate this section eventually so I left it there.
This fix is currently done for Grease Pencil and Mask modes, but it should
also be fixed for the regular Dopesheet mode (in line 244 if anyone wants to do it).
The storage of IDProperty UI data (min, max, default value, etc) is
quite complicated. For every property, retrieving a single one of these
values involves three string lookups. First for the "_RNA_UI" group
property, then another for a group with the property's name, then for
the data value name. Not only is this inefficient, it's hard to reason
about, unintuitive, and not at all self-explanatory.
This commit replaces that system with a UI data struct directly in the
IDProperty. If it's not used, the only cost is of a NULL pointer. Beyond
storing the description, name, and RNA subtype, derived structs are used
to store type specific UI data like min and max.
Note that this means that addons using (abusing) the `_RNA_UI` custom
property will have to be changed. A few places in the addons repository
will be changed after this commit with D9919.
**Before**
Before, first the _RNA_UI subgroup is retrieved the _RNA_UI group,
then the subgroup for the original property, then specific UI data
is accessed like any other IDProperty.
```
prop = rna_idprop_ui_prop_get(idproperties_owner, "prop_name", create=True)
prop["min"] = 1.0
```
**After**
After, the `id_properties_ui` function for RNA structs returns a python
object specifically for managing an IDProperty's UI data.
```
ui_data = idproperties_owner.id_properties_ui("prop_name")
ui_data.update(min=1.0)
```
In addition to `update`, there are now other functions:
- `as_dict`: Returns a dictionary of the property's UI data.
- `clear`: Removes the property's UI data.
- `update_from`: Copy UI data between properties,
even if they have different owners.
Differential Revision: https://developer.blender.org/D9697
Reason was that the notifier did not set the NS_VIEW3D_SHADING
subtype, which the VR view listens for for a shading update.
In the case of "toggle xray", a notifier was absent altogether.
Add mode to overwrite strips on overlap instead of resolving overlap.
When overlap is created, 3 things can happen:
- On partial overlap, handles of overlapped strip are moved
- On complete overlap with smaller strip, overlapped strip is split
- On complete overlap with larger strip, overlapped strip is removed
This mode can be enabled in header.
Reviewed By: fsiddi, mano-wii
Differential Revision: https://developer.blender.org/D11805
Caused by {rB1a81d268a19f}.
This caused e.g. ALT-clicking the 'Link' button to not propagate to
other selected objects (same as the 'Copy To Selected' context menu
entry).
If these are not unique across IDs, checks in ui_selectcontext_begin()
or copy_to_selected_button() could fail.
Now offset by ID pointer.
thx @JacquesLucke for clarification on the POINTER_* macros (and why
not to use them)!
Maniphest Tasks: T90907
Differential Revision: https://developer.blender.org/D12321
This reverts 151eed752b. Originally thought it was necessary to
initialize selected/active indices to -1 to prevent out-of-bounds
list access, but this is not needed since null checks are already
performed after obtaining list members via BLI_findlink().
In addition, leaving indices zero-initialized facilitates use of the
Python API, for example when displaying action map information in a
UI list.
Various changes to reduce risk of out of bounds errors in utf8 seeking.
- Remove BLI_str_prev_char_utf8
This function could potentially scan past the beginning of a string.
Use BLI_str_find_prev_char_utf8 instead which takes a limiting
string start argument.
- Swap arguments for BLI_str_find_prev_char_utf8 so the stepping
argument is first and the limiting argument is last.
This matches BLI_str_find_next_char_utf8.
- Change behavior of these functions to return it the start or end
pointers instead of NULL, which complicated use of these functions
to calculate offsets.
Callers that need to check if the limits were reached can compare
the return value with the start/end pointers.
- Return 'const char *' from these functions
so they don't remove const from the input arguments.
Add an option to the mask modifier to use the vertex weights to generate
smooth in between geometry, instead of just deleting non complete faces.
This can be used to make all sorts of smooth dissolve animations
directly with geometry, which are usually hacked together with shaders.
It also allows for implicit function plotting using geometry nodes and
boolean like operations on non manifold geometry with the proximity
modifier.
Reviewed By: campbellbarton
Ref D10979
These buttons were in Meshes but not for Grease Pencil. This patch add them in order to keep consistency.
Reviewed By: HooglyBoogly
Maniphest Tasks: T90973
Differential Revision: https://developer.blender.org/D12328
Change Area Move snapping locations to even 12ths, rather than current
eights and thirds, so snap distances are consistent sizes. Also adds
snapping at minimum and maximum locations.
see D11938 for details and illustrations.
Differential Revision: https://developer.blender.org/D11938
Reviewed by Hans Goudey
Solution similar to the one seen in {rBb94ab93dfb82}.
The idea is to find the window and region under the cursor to use in the
operator.
Reviewed By: brecht
Maniphest Tasks: T90817
Differential Revision: https://developer.blender.org/D12310
Is used for platforms for which we do not have native implementation,
such as MIPS, for example.
It is possible to test locking implementation on local computer by
defining `ATOMIC_FORCE_USE_FALLBACK` in the atomic_ops_unix.h file.
Run full regression suit with the locking implementation on amd64
Linux platform and all tests passed.
Having non-optimal but working implementation for odd-ball platforms
seems to be a better choice than failing the build entirely.
Differential Revision: https://developer.blender.org/D12313
Should be no visible change on user side.
Preparing for render parts removal as part of Cycles X project.
Differential Revision: https://developer.blender.org/D12317
I think there are the following issues with {rB5fa6cdb77a98}:
- if we introduce a PROP_UNIT_TIME_ABSOLUTE unit, shouldnt it be visible
to RNA as well?
- seems like a double entry sneaked into that commit?
This is in preparation to use this for render time limit in cycles-x.
ref. T90701
Maniphest Tasks: T90701
Differential Revision: https://developer.blender.org/D12315
The inset tool requires moving the cursor towards the center of the
selection, making it nearly impossible to use the inset tool
when the view was aligned with the vertical handle.
Use custom settings for VIEW3D_GGT_tool_generic_handle_free
to make it draw hollow, as large as the scale tool.
Resolves T87991.
Before, distances from each component were handled in the same loop,
making it more complicated to add support for more component types
in the future (and probably hurting performance by dealing with two
BVH trees at the same time, though I didn't test that).
Now each component is handled in a separate function, so that adding
support for another component type is much simpler.
Remove redundant code for drawing text strings that contain only ASCII.
See D12293 for much more detail.
Differential Revision: https://developer.blender.org/D12293
Reviewed by Campbell Barton
The /Zc:inline flag is by default off in the MSVC
compiler however when you build with msbuild it adds
it to the build flags on its own.
Ninja however does not decide on its own to add
flags you didn't ask for and was building without
this flag.
This change explicitly adds the compiler flag so
msbuild and ninja builds are once more building
with the same build flags leading to smaller .obj
files when building with ninja and lightening the
workload for the linker.
This flag is available starting MSVC 2013 update 2
so does not need to be guarded with version checks.
The code assumed that when a node group is is at the highest
level in the node editor, then it is embedded into another data
block and can't be referenced by other node groups. This is true
for shader and compositor nodes, but not for geometry nodes.
We now use a for_each function with callback to iterate through all sequences in the scene.
This has the benefit that we now only loop over the sequences in the scene once.
Before we would loop over them twice and allocate memory to store temporary data.
The allocation of temporary data lead to unintentional memory leaks if the code used returns to exit out of the iteration loop.
The new for_each callback method doesn't allocate any temporary data and only iterates though all sequences once.
Reviewed By: Richard Antalik, Bastien Montagne
Differential Revision: http://developer.blender.org/D12278
Previously when loading an thumbnails for an asset the whole file was
read. Reason this was done was perhaps a future idea to load
all thumbnails inside a blendfile in a single go. This was never implemented
and currently unneeded disk and cpu cycles was spend with finding out what
preview to load.
This patch adds an early break when the thumbnail that the caller is
interested in has been found. This improves the thumbnail extraction
when looking into large files.
Reviewed By: mont29
Maniphest Tasks: T90908
Differential Revision: https://developer.blender.org/D12312
Enables all currently documented OpenXR controller profile
extensions (Reverb G2, Vive Cosmos, Huawei Controller) in order to
support bindings for more VR hardware.
This is necessary because, if these extensions are not enabled, the
OpenXR runtime will return an error when creating a binding with one
of these profiles.
Does not bring about any changes for users at the moment, since
default controller actions have not yet been exposed to users (will
be addressed with D10944, D10948, and D11271).
Originally mentioned that absolute tracking was disabled, which is
wrong because absolute tracking (skipping application of eye offsets)
is always available, although it may not give the expected result of
persistent tracking origins across sessions if the stage space is
unavailable (hence the need for a warning).
Now, the warning makes no mention of absolute tracking, instead
informing the user that the local space fallback will be used and
that they should define tracking bounds via the XR runtime if they
wish to use the stage space.
Add null check for runtime data since it could already have been
freed via wm_xr_exit() (called on file read) prior to the session
exit callback.
Also, fix potential memory leak by freeing session data in
wm_xr_runtime_data_free() instead of session exit callback.
This fixes two memory leaks related to XR action maps.
1. Freeing of action maps needs to be moved from wm_xr_exit() to
wm_xr_runtime_data_free() since the runtime may have already been
freed when calling wm_xr_exit().
2. Action bindings for action map items were not being freed. This
was mistakenly left out of e844e9e8f3 since the patch needed to be
updated after d3d4be1db3.
This fixes a mistake in the XrActionMaps RNA struct declaration.
Originally, the XrActionMaps struct SDNA was set as wmXrData to get
access to wmXrRuntimeData. However, this doesn't give a valid pointer
and the XrSessionState RNA pointer needs to be passed instead.
Since XrSessionState itself does not have SDNA, it is necessary to
pass the XrSessionState pointer to the XrActionMaps struct functions
(new(), new_from_actionmap(), ...) instead of simply using
RNA_def_struct_sdna().
Having settings such as "extend" saved between executions causes
keymaps that don't include this setting to remember the value
between execution.
No longer store this setting for selection operations & remove
redundant values from the key-maps, see: T90275.
Remove BLI_str_utf8_as_unicode_and_size and
BLI_str_utf8_as_unicode_and_size_safe.
Use BLI_str_utf8_as_unicode_step instead since it takes
a buffer bounds argument to prevent buffer over-reading.
There were multiple utf8 functions which treated
errors slightly differently.
Split BLI_str_utf8_as_unicode_step into two functions.
- BLI_str_utf8_as_unicode_step_or_error returns error value
when decoding fails and doesn't step.
- BLI_str_utf8_as_unicode_step always steps forward at least one
returning the byte value without decoding
(needed to display some latin1 file-paths).
Font drawing uses BLI_str_utf8_as_unicode_step and no longer
check for error values.
Use video format for export instead of image sequence. Settings are same
as defined in h264_in_MP4 preset.
Sound default is AAC with 256kbit bitrate.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D7916
Instead of passing separate booleans for whether to store the locations
and distances, check if the spans are empty. And instead of passing a
separate boolean for whether there is valid tree data, pass a pointer
to the data.
The comment for data_eval mentions that it should contain a mesh for
curve objects, however with geometry nodes, objects can evaluate to
curves as well (though they are only containers for the `CurveEval`.
That is a larger issue, but with the upcoming geometry instancing patch
the situation changes, so this commit does not correct that. I also hope
to remove this code in favor of the new curve to mesh code soon.
Instead, just check the evaluated data type in this case, which prevents
the crash, though it is hacky.
- New operator property to toggle edge panning in the keymap:
This is disabled by default to avoid edge-panning in cases where it
gets distracting, such as adding a new node. Only the explicit
translate operator(s) (GKEY or drag) have this enabled now.
- Restore the initial view rect on edge pan cancel:
The initial view rect is now stored in the edge pan operator data.
When an operator with edge panning is cancelled it can now call the
`UI_view2d_edge_pan_cancel` function to restore the original View2D
rect.
- Less delay in node editor scrolling:
Delay is useful when scrolling through long lists, such as in the
outliner, but makes node scrolling feel sluggish and unresponsive.
The lower scroll speed here makes a faster response the better option.
- Zoom influence feature:
Somewhat slower scrolling in UI-space when zoomed out. With the 0.5
zoom influence factor nodes behave as if zoom factor is halved,
otherwise it gets too fast when zoomed out. Previously scrolling would
always be constant-speed in UI space, now it's half-way between UI
space and node (view) space.
Before this patch attempting to remove a particle modifier programmatically
through Python would fail, because it deleted the modifier associated with
the currently active particle system instead of the one passed as an argument
to `bpy.types.ObjectModifiers.remove()`.
This fix adds an additional argument for the particle system to
`object_remove_particle_system`. This allows to specify which particle system
and its associated modifier shall be removed. In case of
`particle_system_remove_exec` it will remain the currently active particle
system, whereas `object_remove_particle_system` passes the particle system
of the modifier. Hence, the correct modifier will be removed.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D12234
The idea is to only allocate pixel storage only when there is an actual
data to be written to them.
This moves the code forward a better support of high-res rendering when
pixel storage is not allocated until render engine is ready to provide
pixel data.
Is expected to be no functional changes for neither users no external
engines. The only difference is that the motion and depth passes will
be displayed as transparent for until render engine provides any tile
result (at which point the pixels will be allocated and initialized to
infinite depth).
Differential Revision: https://developer.blender.org/D12195
This overlay was intended to identify the active objects in modes
like Sculpt Mode, where you don't have any extra visual indication
of what is the current and target object when switching directly
between them.
After having flash on mode transfer on the transfer mode operator,
the visual information this overlays provides is redundant. It is
still available in case some users want to use it like a way of
focusing on the active object.
Reviewed By: JulienKaspar, JacquesLucke
Differential Revision: https://developer.blender.org/D12303
We need to separate the flag telling duplicate code to not handle
remapping to new IDs etc., from the one telling the code that we are
currently duplicating a 'root' ID (i.e. not a dependency of another
duplicated ID).
This whole duplicate code/logic is still fairly unsatisfying, think it
will need further refactor, or maybe even re-design, at some point...
Add a string length argument to BLI_str_utf8_as_unicode_step to prevent
reading past the buffer bounds or the intended range since some callers
of this function take a string length to operate on part of the string.
Font drawing for example didn't respect the length argument,
potentially causing a buffer over-read with multi-byte characters
that could read past the end of the string.
The following command would read 5 bytes past the end of the input.
`BLF_draw(font_id, (char[]){252}, 1);`
In practice strings are typically null terminated so this didn't crash
reading past buffer bounds.
Nevertheless, this wasn't correct and could cause bugs in the future.
Clamping by the length now has the same behavior as a null byte.
Add test to ensure this is working as intended.
Prior to rBb8ecdbcd964a normals were stored both in
DeviceScene.tri_vnormal and the float3 attributes buffer. However, the
normals in `DeviceScene.tri_vnormal` might have be transformed to world
space if the object's transformation was applied, while the data in the
float3 attributes buffer were not. This caused shading issues in cases
where the objects did have transformation applied, as the math expects
the normals to be in object space.
To fix this, convert the normals to object space if necessary before
applying the normal map.
Reviewed By: brecht
Maniphest Tasks: T90854
Differential Revision: https://developer.blender.org/D12294
Simplify logic of speed effect frame calculation by using discrete math
where possible. Only `SEQ_SPEED_MULTIPLY` mode with animation requires
frame map to be built. Frame map building was simplified by removing
unused branches.
Functional change: Animating strip in negative range will reverse playback.
I assume this was limitation of previous system, where each frame map item
was limited to be within correct frame range. Now frame map can contain
values that point beyond usable range and they are limited by
`seq_speed_effect_target_frame_get`. This way it is possible to control
playback rate in both directions.
Mostly fixes T89120 apart from offset handling.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11939
Prefetch needs to avoid rendering scene strips, because
- Rendering in background needs own dependency graph, which fails to
initialize from evaluated data.
- This locks UI and can make it unresponsive for long time periods.
In T88237 prefetch failed to avoid scene strip, because of effect strip
was attached to scene strip.
Ensure, that no effect that is attached to scene strip either directly
or indirectly would be rendered.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11247
When splitting strips, first they are duplicated and then offsets
adjusted. This can fail on cross transitions, because some strips don't
overlap with split frame.
All strips, that relate to each other must be duplicated to ensure
correct relations after splitting, so solution is to delete non
overlapping strips from left or right side respectively.
Since cross transition don't have to overlap with source strips,
splitting such strips would lead to effect being deleted, which
could cause crash when iterating over strips in python. Therefore
splitting of such strips is now forbidden and will generate error.
Splitting of transition will also generate error solely because such
operation is illogical.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D12121
When all strips are selected and overlap is caused, this causes VSE to
hang in infinite loop, because such situation should never happen.
To prevent infinite loop, ensure, that strip overlap is not tested
against single overlapping strip itself.
Prevent overlap that can not be handled because of issue described above
by moving overlapping strip between channels.
Reviewed By: campbellbarton
Differential Revision: D12209
`CurveMapping.evaluate` function expectes `CurveMapping` to be
initialized, while this wasn't documented.
I don't see any reason for not initializing `CurveMapping` on demand.
Initialization was added in rBf16047c2df1e8be56bf76524f9eb1fa5ecde2176
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12145
Changes the threshold comparison from absolute to relative.
Removes threshold for MLoopCol comparison.
Adds a compare relative threshold function.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D12273
`MeshBufferCache` is a struct representing a list of buffers.
As such, `GPUIndexBuf **tris_per_mat` is out of place as it does not
represent one of the buffers in the list.
In fact this member should be close to `GPUBatch **surface_per_mat` as
they are related.
The code for dependencies between buffer and batch had to be reworked
as it relies on the member's position.
Differential Revision: https://developer.blender.org/D12227
When using a Cryptomatte node and selecting 2 views in Multi-View,
its output values are doubled. When selecting 3 tripled and so on.
This causes incorrect compositing results for all the views.
The node creates an input operation for each rendered cryptomatte
pass. In Multi-View, passes are rendered for each view but compositor
is executed per view and should only create operations for those
corresponding to the current view being executed. Otherwise duplicated
operations add up later in cryptomatte operation.
Reviewed By: jbakker
Maniphest Tasks: T89998
Differential Revision: https://developer.blender.org/D12216
Adds full frame implementation to Channel Key, Chroma Key, Color Key,
Color Spill, Cryptomatte, Difference Key, Distance Key, Keying,
Keying Screen and Luminance Key nodes. The other nodes
in "Matte" sub-menu are submitted separately.
No functional changes.
Part of T88150.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12220
Adds full frame implementation to these nodes operations.
When enabling "extend bounds" node option, tiled implementation
result is slightly different because it's using `TranslateOperation`
with bilinear sampling for centering.
Full frame always uses nearest to don't lose image quality.
It has the disadvantage of causing image jiggling on backdrop
when switching size values as it's not pixel perfect.
This is fixed by rounding to even.
No functional changes.
Part of T88150.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12167
Adds full frame implementation to "Displace", "Crop", "Flip",
"Plane Track Deform", "Corner Pin", "Movie Distortion",
"Lens Distortion" and "Map UV" nodes.
The other nodes in "Distort" sub-menu are implemented
separately in other commits.
No functional changes.
Part of T88150.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12166
Adds full frame implementation to "Rotate", "Transform" and
"Stabilize2D" nodes.
To avoid sampling twice when concatenating scale and rotate
operations, a `TransformOperation` is implemented with all
the functionality.
The nodes have no functional changes.
Part of T88150.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12165
Current sampling methods have off by one issues on full frame:
- Bilinear sampling do not fully sample bottom and left image border,
creating edges.
- Single elem buffers are not sampled at all when they should be
at least on the borders to smooth edges.
- EWA filtering is partially implemented on `ReadBufferOperation`, it
needs to be moved to `MemoryBuffer` on full frame.
In order to not affect tiled implementation, this commit creates
specific sampling methods for full frame needs.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12164
Adds full frame implementation to all nodes in "Converter" sub-menu
except "ID Mask" which is implemented separately.
No functional changes.
Part of T88150.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12095
Solves an error in the principled diffuse BSDF, where it was not correctly
rejecting directions outside the hemisphere.
Differential Revision: https://developer.blender.org/D12283
Authored by Henrik Dick (weasel)
Reviewed By YimingWu (NicksBest), Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12284
selected pass
Caused by {rBebaa3fcedd23}.
Seems this above commit assumed an ImageUser's multi_index is only used
for Multiview/Stereo? This is not the case, multi_index also stores the
index for layer/pass combination.
If we call both BKE_image_multilayer_index and BKE_image_multiview_index
(even though this is not appropriate/needed for multilayer images?), we
might end up overwriting multi_index again.
note: looking at this I was also wondering why we update the ImageUser
in image-buffer-aquiring funnctions [and not from the UI, e.g.
template_image_layers, but that is a whole different story I guess, see
comment in T90772 as well]
note2: this could also use a utility function (this is not the only
place where this is done), this is fo a cleanup commit.
Maniphest Tasks: T90772
Differential Revision: https://developer.blender.org/D12267
This was working differently in 2.79, tried tracking this down and it
seems this was wrong since the 2.8 beginning in {rB7907dfc40018}.
This would not only crash without an active scene camera, but would also
result in different tracks from different camera's constraints could not
be selected.
So select id depends on corresponding camera, remove the dependency on
scene camera completely.
Maniphest Tasks: T90651
Differential Revision: https://developer.blender.org/D12230
Remove `font_kerning_style` from `space_userpref.py` since this is no
longer valid.
See more details in D12276
Differential Revision: https://developer.blender.org/D12276
Reviewed by Campbell Barton
Compressing blendfiles can help save a lot of disk space, but the slowdown
while loading and saving is a major annoyance.
Currently Blender uses Zlib (aka gzip aka Deflate) for compression, but there
are now several more modern algorithms that outperform it in every way.
In this patch, I decided for Zstandard aka Zstd for several reasons:
- It is widely supported, both in other programs and libraries as well as in
general-purpose compression utilities on Unix
- It is extremely flexible - spanning several orders of magnitude of
compression speeds depending on the level setting.
- It is pretty much on the Pareto frontier for all of its configurations
(meaning that no other algorithm is both faster and more efficient).
One downside of course is that older versions of Blender will not be able to
read these files, but one can always just re-save them without compression or
decompress the file manually with an external tool.
The implementation here saves additional metadata into the compressed file in
order to allow for efficient seeking when loading. This is standard-compliant
and will be ignored by other tools that support Zstd.
If the metadata is not present (e.g. because you manually compressed a .blend
file with another tool), Blender will fall back to sequential reading.
Saving is multithreaded to improve performance. Loading is currently not
multithreaded since it's not easy to predict the access patterns of the
loading code when seeking is supported.
In the future, we might want to look into making this more predictable or
disabling seeking for the main .blend file, which would then allow for
multiple background threads that decompress data ahead of time.
The compression level was chosen to get sizes comparable to previous versions
at much higher speeds. In the future, this could be exposed as an option.
Reviewed By: campbellbarton, brecht, mont29
Differential Revision: https://developer.blender.org/D5799
Instead of handling mmap, compression etc. all directly in readfile.c, refactor
the code to use a generic FileReader.
This makes it easier to add new compression methods or similar, and allows to
reuse the logic in other places (e.g. thumbnail reading).
Reviewed By: campbellbarton, brecht, mont29
Differential Revision: https://developer.blender.org/D5799
With the ongoing transition to C++ files, Windows build
breaks often because of designated initializers.
Now we have two compilers to catch the MSVC build error on.
Reviewed By: #platform_macos, brecht, campbellbarton
Differential Revision: https://developer.blender.org/D11940
Optimization of font kerning by only caching kerning values after a
pair is encountered. Also saves unscaled values so they don't have to
be rebuilt between font size changes.
See D12274 for more details and speed comparison.
Differential Revision: https://developer.blender.org/D12274
Reviewed by Campbell Barton
Updates sphinx and the theme to the latest version along with any of their dependencies.
Note that we will be sticking to sphinx 4.1.1 until sphinx 4.2 for the same reasons listed in:
https://developer.blender.org/rBM8334
This adds a setting to enable data caching, and another one to set the
maximum cache size in megabytes.
When caching is enabled we load the data for the entire animation in
memory, as we already do, however, if the data exceeds the memory limit,
render is aborted.
When caching is disabled, we simply load the data for the current frame
in memory.
Ref D10197
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D11163
The multi-function network system was able to compose multiple
multi-functions into a new one and to evaluate that efficiently.
This functionality was heavily used by the particle nodes prototype
a year ago. However, since then we only used multi-functions
without the need to compose them in geometry nodes.
The upcoming "fields" in geometry nodes will need a way to
compose multi-functions again. Unfortunately, the code removed
in this commit was not ideal for this different kind of function
composition. I've been working on an alternative that will be added
separately when it becomes needed.
I've had to update all the function nodes, because their interface
depended on the multi-function network data structure a bit.
The actual multi-function implementations are still the same though.
As subdivision objects are first class citizens in Alembic, to
differentiate them with non-subdivided polygon meshes, the Alembic
Procedural automatically sets up subdivision properties on the generated
Cycles Mesh.
However, for real-time playback subdivision is far too slow, so this
modifies the detection of a MeshSeqCache modifier used to activate the
procedural to allow for a Subsurf modifier right after the cache one. If
present, the procedural will tag the object for subdivision, if absent, the
object will be treated as a regular mesh.
This is a temporary measure for until subdivision surface settings are part
of the Mesh datablock (see T68891).
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D11162
Several pure runtime data in this ID type were not properly cleared by
write/read processes.
Note that the initial undo step (the one leading back to initial read
file state) is still forcing re-load of image, for some reasons.
Common investigation together with Jeroen Bakker (@jbakker), thanks. See
also D12242.
This was partially broken with {rBde9ea94fc6f}.
The `Frame Step` and `Second Step` snapping options were working as if
they were `Nearest Frame` and `Nearest Second` respectively in the
`Dope Sheet` and `NLA` editors.
In the `Graph Editor` the problem was more serious:
"Second Step: ... The keyframe itself moves along as though in snapping
were active at all, while its handles 'stay behind' until it reaches
the next second boundary, at which point the teleport handles to
'catch up'".
The snapping code for these modes was spread across the transform
mode code and `recalcData` of each data type. Therefore, create a
unified snapping code for these options so that all issues are fixed in
one place.
Differetial Revision: https://developer.blender.org/D12241
`td2d->loc`, `td2d->loc2d`, `td->loc` and `td->iloc` were not being
initialized as is done with the other conversion types.
This avoids problems with transform modes becoming incompatible.
This avoids problems with incompatible transform modes that could
result in a crash.
This was not really useful, and added estra useless steps in case and ID
should not actually be written.
Further more, it prevented clearing the usercount on write, which can be
cause a false positive 'chanhged' detection in undo/redo case.
This patch exposes the Cycles Alembic Procedural through the MeshSequenceCache
modifier in order to use and test it from Blender.
To enable it, one has to switch the render feature set to experimental and
activate the Procedural in the modifier. An Alembic Procedural is then
created for each CacheFile from Blender set to use the Procedural, and each
Blender object having a MeshSequenceCache modifier is added to list of objects
of the right procedural.
The procedural's parameters derive from the CacheFile's properties which are
already exposed in the UI through the modifier, although more Cycles specific
options might be added in the future.
As there is currently no cache controls and since we load all the data at the
beginning of the render session, the procedural is only available during
viewport renders at the moment. When an Alembic procedural is rendered, data
from the archive are not read on the Blender side.
If a Cycles render is not active and the CacheFile is set to use the Cycles Procedural,
bounding boxes are used to display the objects in the scene as a signal that the
objects are not processed by Blender anymore. This is standard in other DCCs.
However this does not reduce the memory usage from Blender as the Alembic data
was already loaded either during an import or during a .blend file read.
This is mostly a hack to test the Cycles Alembic procedural until we have a
better Blender side mechanism for letting renderers load their own geometry,
which will be based on import and export settings on Collections (T68933).
Ref T79174, D3089
Reviewed By: brecht, sybren
Maniphest Tasks: T79174
Differential Revision: https://developer.blender.org/D10197
The current behavior of the Alembic importer is to only create a
`MeshSequenceCache` modifier or a `Transform Cache` constraint to imported
objects if they have some animated properties.
Since static objects do not have a cache reader, when reloading files those
objects are not updated. Currently, the only way to properly reload a file
because of this is to reimport it.
This adds an option to the importer to always add a cache reader, even if
there is no animated data, to ensure that all objects coming from Alembic
archive are linked to them and updated properly upon reloads.
Reviewed by: brecht, sybren
Ref D10197.
Simplification of BLF code after removal of kerning modes.
See D12262 for more details.
Differential Revision: https://developer.blender.org/D12262
Reviewed by Campbell Barton
This patch removes the "Kerning Style" option for UI widget font
drawing and uses only the current default of "Fitted", since the other
option of "Unfitted" is just the result of truncation errors.
see D12231 for much more information.
Differential Revision: https://developer.blender.org/D12231
Reviewed by Campbell Barton
The main reason for this is to speed up updates by avoid unnecessary
copies as the Generated coordinates are a copy of the vertices.
Creating this attribute may become optional in the future, with UI
parameters to select which attribute to use from the Alembic archive as
reference.
This modifies the attribute lookup to use object coordinates if no
generated coordinates are found on the geometry.
This is useful to avoid creating and copying this attribute, thus saving
a bit of time and memory.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D12238
Vertex normals are needed for normals maps and therefore are packed and send
to the device alongside the other float3 attributes. However, we already pack
and send vertex normals through `DeviceScene.tri_vnormal`.
This removes the packing of vertex normals from the attributes buffer, and
reuses `tri_vnormal` in the kernel for normals lookup for normal maps, which
reduces memory usage a bit, and speeds up device updates.
This also fixes potential missing normals updates following rB12a06292af86,
since the need for vertex normals for normals maps was overlooked.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D12237
Followup to previous commit, rBfffe219bdb8drBfffe219bdb8d
Again this is only for sake of sane ID/overrides managment for now,
the nodetrees themselves are not overridable from user PoV yet.
This reverts rB6899dbef77cd and makes the pointer explicitely
processable by override & diffing code.
Previous changes & fixes have fixed the 'driver-workaround' case afaict.
Note that this only enables proper generic handling of overrides and
their ID pointers, no node property is actually overridable currently.
Embedded IDs (root nodetrees, master collection, etc.) pointer itself is
not editable, but their content may be overridden.
LibOverride code is supposed to know how to handle those embedded IDs.
This should be a no-change commit for now, but is required to enable
initial basic support of nodetrees in library override.
NOTE: Proper full support of liboverrides in nodes is yet to be designed
(has UX unresolved issues, since we likely do not want to expose/make
overridable ALL settings of ALL nodes).
This code checks whether an ID pointer property of an override does not
match its linked reference when it is expected to do so.
This is a goiod indication that a resync is needed.
Previous code would falsy detect overrides of IDs referencing themselves
as needing a resync, when this is not effectively the case.
Caused by {rBbbb1936411a5}.
When adding strips via the new SEQ_add_XXX_strip functions, the
`Editing->seqbasep` pointer was passed around.
Following in `seq_add_generic_update` this `seqbasep` pointer was used
to ensure a unique name.
But `seqbasep` is the pointer to the current list of seq's being edited
(**which can be limited to the ones within a meta strip**).
We need unique names across all strips though (since these are used for
RNA paths, FCurves as reported), so now use the scene's `Editing-
>seqbase` (**which is the list of the top-most sequences**) instead.
Unfortunately this might have screwed files to a borked state, not sure
if this could easily be fixed...
Maniphest Tasks: T90737
Differential Revision: https://developer.blender.org/D12256
Master multiplied the weight paint on top of the rendered image. This
reduced readability.
This patch removes the multiplication for weight painting and adds a
hint of the geometry below the overlay.
Reviewed By: Mets, pablodp606, campbellbarton
Maniphest Tasks: T73434
Differential Revision: https://developer.blender.org/D12170
Removes the artificial requirement that UDIM tile sets start at 1001.
Blender was already capable of handling sparse tile sets (non-contiguous
tiles) so the restriction around starting at 1001 was unnecessary in
general.
This required fixing a few UDIM-related python bugs around manually
updating the `tile_number` field on images as well. See the differential
for details. No script changes are necessary but they will now work,
correctly, in many more cases.
Differential Revision: https://developer.blender.org/D11859
Lowers tile splitting limit so models with extremely dense mesh
portions could still have reasonable performance while for more
common cases the performance impact should be minimal.
Reviewed By: Sebastian Parborg (zeddb), Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12236
When using wireframe opacity, the paint overlay needs to be drawn
before the wireframes in order to alpha blend correctly.
Sculpt overlays were also affected by this, so this commit refactors
this part of the code in case other overlays needs to be added in
the future.
Reviewed By: Mets
Differential Revision: https://developer.blender.org/D12235
There was an unreported bug that switch direction would not switch the order of the vertex group weights. This caused join to do it wrong as well.
Changed to use `BLI_array_reverse` function here to reverse both the normal points and the weights, therefore simplifying the code.
Differential Revision: https://developer.blender.org/D12251
`frame_current_final()` should be used to access the Scene time after
remapping, which also matches how the particles system handles time.
Reviewed By: brecht
Maniphest Tasks: T77307
Differential Revision: https://developer.blender.org/D12239
Standard attributes are not added to the attributes requests when
shaders only have displacement. This is because nodes are only
considering the case when the surface socket is connected.
To support this, added `Shader.has_surface_link()` which checks for both
cases (`has_surface` and `has_displacement`) and replaces all checks on
`Shader.has_surface`.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D12240
This patch adds the missing ability to keep the vertex groups when converting to a grease pencil object. This is increadible useful to create rigged grease pencil objects which move together with rigged meshes.
Differential Revision: https://developer.blender.org/D12249
Reuse existing enums instead of expanding them since it bloats the binary.
The icons enum for example contains over 900 items and was being
expanded 17 times (once for each function that takes an icon argument).
Similar with the event type enum which contains over 200 items and was
duplicated 7 times.
makesrna.c now matches enum definitions from declarations in
RNA_enum_items.h, using their identifiers when found.
The overall space saving on my system is 776kb
(tested with a stripped release build).
Reviewed By: brecht
Ref D12245
This was not working like elsewhere in both NLA and Graph Editor
(meaning that when snapping was already enabled, {key Ctrl} during
transform did not disable it).
Now use getAnimEdit_SnapMode() for this in NLA and GE as well.
Maniphest Tasks: T87173
Differential Revision: https://developer.blender.org/D12244
When adding a range of tiles, the operator could incorrectly calculate
the end_tile. It would not account for the start_tile itself and the
IMA_UDIM_MAX value was 1 too small. This is most noticeable when
attempting to fill the entire supported range of tiles.
Differential Revision: https://developer.blender.org/D11857
Bug caused by integer overflow in ffmpeg_generic_seek_workaround().
Function max_ii() was used to limit int_64tvalue.
After fixing the issue there was another issue, where near-infinite loop
was caused by requested_pos being very large and stream being cut in a
way, that it was missing keyframe at beginning.
This was fixed by checking if we are reading beyond file content.
Reviewed By: zeddb
Differential Revision: https://developer.blender.org/D11888
Refactor and improve waveform drawing.
Drawing now can use line strips to draw waveforms instead of only
triangle strips. This makes us able to properly visualize thin waveforms
as they would not be visible before. We now also draw the RMS value of
the waveform.
The waveform drawing is now also properly aligned to the screen pixels
to avoid flickering when transforming the strip.
Reviewed By: Richard Antalik
Differential Revision: https://developer.blender.org/D11184
The duration and start time for audio strips were not correctly read in
audaspace.
Some video files have a "lead in" section of audio that plays before the
video starts playing back. Before this patch, we would play this lead in
audio at the same time as the video started and thus the audio would not
be in sync anymore.
Now the lead in audio is cut off and the duration should be correctly
calculated with this in mind.
If the audio starts after the video, the audio strip is shifted to
account for this, but it will also lead to cut off audio which might not
be wanted. However we don't have a simple way to solve this at this
point.
Differential Revision: http://developer.blender.org/D11917
The seek pts was not correctly calculated.
In addition to that we were not seeking in the video pts time base.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11921
The video duration was not read correctly from the video file.
It would use the global duration of the file which does in some cases
not line up with the actual duration of the video stream.
Now we take the video stream duration and start time into account when
calculating the strip duration.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11920
If the add strip operator errored out, we wouldn't free custom data allocated
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11919
Before we didn't encode the audio up until the current frame.
This lead to us not encoding the last video frame of audio.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11918
We didn't flush audio after encoding finished which lead to audio
packets being lost.
In addition to this the audio timestamps were wrong because we
incremented the current audio time before using it.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11916
Replaces the boolean option with enum menus for consistency
with the subdivision modifier (rB66151b5de3ff,rB3d3b6d94e6e).
Adds all UV interpolation options.
Original patch by Eitan. Updated by Himanshi Kalra <calra>.
{F9883204}
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D10417
Add color data type comparison for meshes, adding it as
part of comparing meshes with geometry nodes applied.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D12192
blf_kerning_cache_new was performing many unnecessary hash lookups,
calling blf_glyph_search 32768 times. Use a lookup table to reduce this
to the number of ASCII characters (128 calls).
This addresses reduced visibility of scenes (as displayed in the VR
headset) that can result from the 8-bit color depth format currently
used for XR swapchain images.
By switching to a swapchain format with higher color depth (RGB10_A2,
RGBA16, RGBA16F) for supported runtimes, visibility in VR should be
noticeably improved.
However, current limitations are lack of support for these higher
color depth formats by some XR runtimes, especially for OpenGL.
Also important to note that GPU_offscreen_create() now explicitly
takes in the texture format (eGPUTextureFormat) instead of a
"high_bitdepth" boolean.
Reviewed By: Julian Eisel, Clément Foucault
Differential Revision: http://developer.blender.org/D9842
One tricky aspect is that we want to allow for the version string
part of the header to mismatch, so only check for file equality
after the first lines.
This patch turns off the preloading of ascii glyphs and instead caches
each glyph the first time it is actually used.
See D12215 for much more detail.
Differential Revision: https://developer.blender.org/D12215
Reviewed by Campbell Barton
This patch makes some non-functional changes to BLF code. Some size
defines added, comments changed, simplification of macro
BLF_KERNING_VARS.
See D12200 for more details.
Differential Revision: https://developer.blender.org/D12200
Reviewed by Campbell Barton
Some of the enum options in the context menu operations are not
supported for all element types.
`TSE_SEQUENCE`, for example, only supports the `Select` option.
So, populate the enum list dynamically depending on the type.
Also add some calls that were missing for the `TSE_SEQUENCE` type.
(`WM_event_add_notifier` and `ED_undo_push`).
There was already some code for that, but it was broken, and proper
resync was completely missing.
There might still be more resync needed in library linking operators
though.
Add a debug-only check regarding consistency of the cache (mapping from
objects to their bases) for a given ViewLayer.
Issues can happen otherwise when some code does remapping of objects,
and forgets to call `BKE_main_collection_sync_remap()` (which clears
those caches) instead of `BKE_main_collection_sync()`.
channel names
Working with multiple strips keyframes was unneccessarily difficult in
Animation Editors (since some anim channels could not be distinguished).
Namely `Crop` and `Transform` are nested structs (nested under
`Sequence`), so these were just displaying the raw struct name.
Also strip modifiers did not have their strip name in their channel
names. Now include the strip name for these.
before
{F10277439}
after
{F10277441}
Maniphest Tasks: T90595
Differential Revision: https://developer.blender.org/D12193
While trying to get Blender 2.93.x LTS to build fine on all release architectures in Debian, I noticed that the misleading use of "mips" as integer variable caused problems when compiling on mips64el. The patch should fix the issue.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D12194
This reverts commit 41e6509818.
This broke "CubeMaskFirst" test.
Any value even slightly outside the [-1.0..1.0] range
caused the result to be nan, which can happen when calculating
the dot-product between two unit length vectors.
When in NLA tweak mode, the action unlink button in the Dopesheet /
Action Editor should be a mere shortcut to exiting tweak mode [nothing
else].
Instead, it was also clearing the action fully, not returning to the
previous edited action before going into tweak mode.
Now dont "flush" by clearing the action, instead exit tweakmode, clear
the scenes SCE_NLA_EDIT_ON flag (if this isnt done some NLA operators
like pushdown were not immediately available because their poll checked
this flag) and send appropriate notifier to have everything update nicely.
Part of T87681 (Bug 4/5/6).
Maniphest Tasks: T87681
Differential Revision: https://developer.blender.org/D11052
Animation indicators as well as decorators for properties were not
updating correctly in the following cases:
- NLA pushdown (this was reported in T87681)
- NLA enter/exit tweakmode
- Outliner unlinking/setting action
These actions all send a ND_NLA_ACTCHANGE notifier which the Properties
Editor was not listening to [which is now added].
part of T87681.
Maniphest Tasks: T87681
Differential Revision: https://developer.blender.org/D11040
This change reduces the GPU context switches when drawing keyframes.
In the previous situation the keyframe blocks and keyframe keys were
drawn per channel. With this patch first all the keyframe blocks are
drawn for all channels and after that the keyframe keys are collected
for all channels and send to the GPU in a single draw call.
This was left over from when these scripts were loaded as modules,
where their names needed to be compatible with Pythons module naming.
Version patch existing files so text with register enabled
without a `.py` extension wont start executing on startup.
Resolves T89532.
This supported calculating normals for MPoly array which was copied to
an MFace aligned array.
Remove the functions entirely since MFace use is being phased out and
these function isn't used anywhere.
Use BKE_mesh_calc_normals instead of
BKE_mesh_calc_normals_mapping_simple for curve modifier calculation.
This only made sense for derived-mesh which is no longer used.
Remove the 'only_face_normals' argument.
- BKE_mesh_calc_normals_poly for polygon normals.
- BKE_mesh_calc_normals_poly_and_vertex for poly and vertex normals.
Order arguments logically:
- Pair array and length arguments.
- Position normal array arguments (to be filled) last.
Optimize mesh normal calculation.
- Remove the intermediate `lnors_weighted` array, accumulate directly
into the normal array using a spin-lock for thread safety.
- Remove single threaded iteration over loops
(normal calculation is now fully multi-threaded).
- Remove stack array (alloca) for pre-calculating edge-directions.
Summary of Performance Characteristics:
- The largest gains are for single high poly meshes, with isolated
normal-calculation benchmarks of meshes over ~1.5 million showing
2x+ speedup, ~25 million polygons are ~2.85x faster.
- Single lower poly meshes (250k polys) can be ~2x slower.
Since these meshes aren't normally a bottleneck,
and this problem isn't noticeable on large scenes,
we considered the performance trade-off reasonable.
- The performance difference reduces with larger scenes,
tests with production files from "Sprite Fight" showing
the same or slightly better overall performance.
NOTE: tested on a AMD Ryzen TR 3970X 32-Core.
For more details & benchmarking scripts, see the patch description.
Reviewed By: mont29
Ref D11993
The poll for unlinking calls `nla_panel_context` without providing an
adt pointer, and there is a check for this pointer in
`nla_panel_context` leading to never returning true if it is not
provided. (this is fine if there are tracks already, poll would succeed
in this case, `nla_panel_context` goes a different code path then)
Same call to `nla_panel_context` is also done in the beginning of the
corresponding unlink exec function (but this time providing the pointer
because it is used later), so it makes sense to do the same thing in the
poll function. Equal check is also done in the panel poll function, so
now these are all in sync.
Part of T87681.
Maniphest Tasks: T87681
Differential Revision: https://developer.blender.org/D11041
Was reported for a file which does not have an active track set in
AnimData even though it was in strip twek mode (but this was accessed in
is_nlatrack_evaluatable()).
Root cause for this is not totally clear, but I assume the situation is
described as part T87681 (and is fixed in D11052).
This patch here just prevents the crash for files that are already in the
borked state.
Reviewers: sybren
Maniphest Tasks: T89805
Differential Revision: https://developer.blender.org/D12085
Clearing the parent from the UI using the X (or from python) clears the
`parsubstr` and set `partype` back to `PAROBJECT`.
Using the Clear Parent operator would leave the `parsubstr` (and thus
`parent_bone`) untouched even though this operator claims to "clear
parenting relationship completely" (it also removes parent deform
modifiers for example).
So now, also clear `parsubstr` and set back to `PAROBJECT` [which is
default].
Maniphest Tasks: T88498
Differential Revision: https://developer.blender.org/D11503
Add Apply Constraint, Duplicate Constraint, and Copy To Selected
operators, and include them in a menu similar to the menu for modifiers.
The shortcuts in the extras menu are also matched to modifiers.
All the here added operators are intended to work exactly like the
analogous ones for modifiers. That means the apply operator should apply
a constraint as if it was first in the list, just like modifiers do. I
have added the same warning message as for modifiers when that happens.
The decision to use this approach of appling the constraint as if it was
first, was made for consistency with modifiers. People are already used
to how it works there. Is also provides more intricate control over the
applied transforms, then just applying all constraints up to that one.
Apply all constraints is already kinda implemented in Bake Animation.
Reviewed By: HooglyBoogly, sybren, #user_interface
Differential Revision: https://developer.blender.org/D10914
During the processing of a continuous drag event, other mouse move
events may be in the queue waiting to be processed.
But when a mouse wrapping happens, these waiting mouse move events
become out of date as they report a mouse position prior to wrapping.
The current code ignores these events by comparing their `timestamp` to
the time recorded in the last mouse wrapping.
The bug happens because the computed value in
`mach_absolute_time() * 1e-9` for some reason is incompatible with the
value of `[event timestamp]`.
Since macOS 10.6, we have a new way to get the amount of time the
system has been awake. `[[NSProcessInfo processInfo] systemUptime]`.
Using this updated method fixed the problem.
Differential Revision: https://developer.blender.org/D12202
Clearing the window was done in wm_file_read_post which was deferred.
This was needed as it left the context in an invalid state
where the window was set but the screen wasn't.
Crashing when setting up keymaps that attempted to access the
scene from the window in the property update function.
Regression in 497bc4d199
Add RNA_struct_type_find_property_no_base for use in the rare situations
when this isn't desired.
Resolves T90617, where sequence strip sub-types weren't detecting
properties that exist in the base "Sequence" types.
- Remove old comment for editors with weak syntax highlighting.
- Remove disabled code to initialize Blender with a file path.
- Remove file name references to function names since these
were outdated, modern development environments can look up this info.
Resolve order of initialization error reading startup file,
support postponing running wm_file_read_post until Blender
has been initialized.
Deferring updates allows duplicate initialization
to be removed from WM_init.
Reviewed By: mont29
Ref D12184
Makesdna fails to detect issues in 32 bit code that can
only be resolved by adding a padding pointer.
We never noticed since we ourselves no longer build for
32 bit, but debian's 32 bit builds got bitten by this
A rather extensive explanation on why this is alignment
requirement is there can be found in this comment:
https://developer.blender.org/D9389#233034
Differential Revision: https://developer.blender.org/D12188
Reviewed by: sergey, campbellbarton
Some of the dna structs were not properly
aligned for 32 bit builds causing issues
for some of the 32 platforms Debian builds
for.
Reviewed By: sergey, brecht
Differential Revision: https://developer.blender.org/D9389
The loading of a font size or style renders bitmaps of the characters
0-255 and stores them in a cache. But glyphs 128-255 in this cache are
not accessible. What used to be ansi high-bit characters are now multi-
byte UTF-8 sequences.
Therefore this patch reduces the glyph_ascii_table size to 128 and
only caches characters 32-127, the visible portion of ASCII, which
greatly reduces the time to load a font.
See D12189 for more details.
Differential Revision: https://developer.blender.org/D12189
Reviewed by Campbell Barton
Before this commit rendering material icons the floor will is hidden.
This reduces the readability of reflective/refractive materials.
check patch for additional screenshots and notes.
This patch will switch the floor material that uses ray visibility tricks to render a floor for reflective rays.
Eevee uses screen space reflections that makes this a different problem. There is nothing else drawn in
the scene in screen space so we need a different trick. Using math we convert a reflective ray to UV space
and generate a world that projects a checker pattern to infinity.
As now the floor is in the world it is being reflected via
a cubemap. As the film is transparent the background (including the floor isn't rendered)
In the future when Eevee supports vulkan raytracing we can re-evaluate and perhaps remove this
approximation.
We tried lightprobes but that wasn't able to do the trick.
Using the compositor would lead to more memory usage (render layers and intermediate buffers) and slower performance.
Solution has been validated with Simon
Reviewed By: sybren, Severin
Differential Revision: https://developer.blender.org/D11988
To improve the presentation of nodes in the node editor. Recognize the
following metadata from the OSL specification:
* [[ string label = "UI Label" ]]
* [[ string widget = "checkBox" ]]
* [[ string widget = "boolean" ]]
Ref T89741
Differential Revision: https://developer.blender.org/D12074
Idea for 3.0 is to disable all functionality that isn't well polished
and focus on those parts first. Starting with poses.
* Adds a new experimental option "Extended Asset Browser", replacing
"Asset Browser".
* Unlike the previous option, this isn't enabled by default anymore.
This didn't work well in practice and caused plenty of confusion.
* "Mark as Asset" and "Clear Asset" are hidden if the option is
disabled.
* Same for the category selection in the Asset Browser.
* Always show display the "Only Assets" option in the File Browser while
browing inside .blend files. That way you can hide data-blocks that
are not pose assets.
* The Asset Library setup UI in the Preferences is always visible now,
it's needed for pose library access.
Addresses T90181, T90180 and T90300.
Differential Revision: https://developer.blender.org/D12120
ID data-blocks that could be accessed from Python and weren't freed
using BKE_id_free_ex did not release the Python reference count.
Add BKE_libblock_free_data_py function to clear the Python reference
in this case.
Add asserts to ensure no Python reference is held in situations
when ID's are copied for internal use (not exposed through the RNA API),
to ensure these kinds of leaks don't go by unnoticed again.
Using high quality normals for vertex offset when set
for higher precision offsets.
This was only used for calculating even-offset.
Reviewed By: campbellbarton
Ref D12176
This is a slight refactoring of the Win32 IME code to remove the use of
Language IDs, which is now strongly deprecated. Instead this uses the
new recommended Locale Names, ie ISO-639-1 2-letter abbreviated names
like "en" for English rather than ID 0x09.
See D12143 for more details.
Differential Revision: https://developer.blender.org/D12143
Reviewed by Ray Molenkamp
bounding boxes
These are namely 'LIGHT', 'CAMERA', 'EMPTY', 'SPEAKER' and 'LIGHTPROBE'.
Note that Empties are included here despite the fact that they have
instancing capabilities ('Display As' can be 'Bounds' for example which
then displays all instanced geometry with boundingboxes -- this however
is not meant to work with the 'Bounds' checkbox and the display bounds
type, these are only affective for the object itself, not its instances)
Issue came up in T88443.
Maniphest Tasks: T88443
Differential Revision: https://developer.blender.org/D11344
Adds full frame implementation to "Composite", "File Output" and
"Split Viewer" nodes.
The other nodes in "Output" submenu are implemented separately.
No functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12091
Adds full frame implementation to "Alpha Over",
"Hue Saturation Value", "Invert", "Tonemap" and "ZCombine" nodes.
The other nodes in "Color" submenu are implemented separately.
No functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12092
It was only affecting tiled fallback on full frame mode. If tiles from a
constant operation were multi-thread initialized, its buffer
was inflated multiple times.
Adds full frame implementation to "Bokeh Image" node, "Track Position"
node, `SetVectorOperation` and `MovieClipAttribute`.
The other nodes in "Input" submenu are implemented separately.
`MovieClipAttribute` needs resolution to calculate its constant value, it can't be constant folded,
which requires it to be a `ConstantOperation`. Now `ConstantOperation` contemplate this case
and any operation that is always constant without depending on inputs should implement it.
If in the future an operation needs to get an input constant element during
`determineResolution` it must first determine its input resolution.
The nodes have no functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12090
Adds full frame implementation to this node operations.
No functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11751
Adds full frame implementation to this node operation.
No functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11634
Adds full frame implementation to this node operation.
No functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11694
Empties can only instance a collection, instancing on "Vertices" or
"Faces" does not make sense for empties, make that clear in the UI.
ref D11348
Maniphest Tasks: T88443
Differential Revision: https://developer.blender.org/D11349
Basically, only meshes, empties and pointclouds support direct
instancing atm., no need to have the panel for other types.
note: prior to rB2eca054e14b1, collection instancing was possible on all
types (but that was removed in said commit)
note2: for empties, rna_Object_instance_type_itemf should also be
tweaked so we dont get "Vertices" and "Faces" options, but that can be
done in a separate commit
Maniphest Tasks: T88443
Differential Revision: https://developer.blender.org/D11348
Added the comparison of non-generic attributes with generic
attributes in the same loop to avoid issues with different
order in layer->types of the two meshes.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D12149
Caused by {rB37570a73170e}.
Above commit wasnt taking into account that at this point the link could
still be NULL.
Maniphest Tasks: T90564
Differential Revision: https://developer.blender.org/D12180
Right clicking would spawn the context menu under the cursor, but some
operators would actually act on the active asset/file which wasn't
the one clicked on.
When multiple files are selected and one of them is right-clicked on,
selection is not changed to allow operations on multiple files. E.g.
deletion.
This makes the File/Asset Browser match the Outliner (in behavior, not
implementation).
For the right-click selection keymap:
* The context menu still only spawns on W.
* Bonus: Right click now does something, it actually selects files!
I could have done additional changes here to avoid this, but it seems
like a good addition.
This is also a better alternative to rB5edfde58fe60, which didn't work
properly either. Using rename from the context menu would only work if
the clicked on file was also active...
Differential Revision: https://developer.blender.org/D12065
Reviewed by: Campbell Barton
When blender starts and the mouse is over a file/asset browser it
crashes. This is because blender wants to highlight a file, but the
layout isn't initialized yet.
Blender forbids property changes in .draw() methods. But they weren't
caught after a call to .template_list() with a custom list type.
Support nested calls that disallow writes.
Caused by {rBe3faef686d38}.
Error was getting the preview [which wasnt there yet]
These only appeared once the material tab in the Properties Editor was
used (since this ensured a valid preview icon).
Above commit changed behavior for RNA icon getter (this does not create
data anymore), so ensure the preview by hand here.
Maniphest Tasks: T89284
Differential Revision: https://developer.blender.org/D12178
This was really missing there (some COW tags behavior was also
documented in some code using them, like in `sound.c`, but not in their
definition).
Ref. T88555.
Change the dylib folder relative to `Blender` executable to be
the same as before rB652fbc200500497a67bd11d18b786587ba34e3d9 and same
as bpy.so : `@loader_path/../Resources/${BLENDER_VERSION}/lib`
The crash occurred calling because mesh_get_eval_final in edit-mode
freed all derived mesh data without tagging the object for updating.
However meshes in edit-mode weren't meant to be used as knife-project
source-data, adding support for multi object edit-mode caused this.
This makes texture sockets have a label by default. This can be changed
by adding the SOCK_HIDE_LABEL flag to the socket. With this change the
switch node now shows the labels "True" and "False" like for the other
types of sockets.
To be consistent with the image editors and 3D viewport
the cursor location can be changed from the sidebar.
This was missing from the clip editor, but support has been added in this commit.
Previously, the only way to precisely set the cursor was
to call the set cursor operator then use the redo panel to adjust the value.
To be consistent with all other editors the annotation
layers pannel should be placed in a "View Tab".
In my next commit, this tab will be expanded to include other options.
The 2D cursor should be visible in both mask and uv edit modes.
This was likely and oversight when splitting the image editor
into the UV and Image editors
* Revert back to OpenMP 9.0.1 due to bug causing cloth physics test to fail.
* Skip flex build on macOS to avoid link error, only reason we build this is
due to old flex version on Linux CentOS 7.
* Fix PNG cmake argument that expects lowercase on instead of ON.
Ref T90507, T88438
Pass `FileListReadJob` to the `read_job_fn` callback, instead of exploding
the struct into its individual fields, passing those as parameters, and
marking a bunch of those as unused again.
No functional changes.
Caused by fix for T90256 and a misunderstanding in D11928.
Don't skip tagging edges when the auto-smooth angle is 180 degrees
since this skips topology checks which are needed for properly
calculating edge loop normals.
Caused by 4f64fa4f86.
Was a bad backport from the Cycles X branch: the fact that CPU and GPU
has different reset code paths was not taken into account.
`bpy.ops.font.text_insert(text="multiple characters")` wasn't working.
When the text is selected does not correctly insert multiple characters.
- When the text was selected from left to right,
the cursor only move one position next to the selected text.
- When the text is selected from right to left,
a part of the selected text remain.
Ref D12161
- Remove check for screens being None as this would raise an error.
- Replace loop over `area.spaces` with `area.spaces.active`.
- Loop over grease pencil data directly instead of accessing
through the scenes objects.
- Split versioning into functions.
- Use `update_factory_startup_*` prefix for function names
as this isn't versioning existing files.
This commit makes the display options for mask only show in the header for the clip and image editors.
Prior to this change they would display in the header for the clip editor and in the sidebar for the image editors.
This commit does two things, first it removes the proportional editing tool settings.
This is not accessible code and is has not been used since the grease pencil/annotations changes in 2.8.
Second, this patch reorders the if statements so that the display options are always shown on the rightside.
Reviewed By: antoniov
Differential Revision: https://developer.blender.org/D12163
This seems to be really old code from 2.4 or earlier.
I was unable to find when it was removed gitk and git blame both couldnt find anything.
However, it is safe to say that this code is long gone.
Fix poll_message_set API documentation to consistent with Python style
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D12150
This adds support to compile the html python api docs from the command line by running `make doc_py` matching support between windows and unix.
This patch also makes it so the compiler is not needed if you set the `blender_bin` variable, this affects icon generation as well.
In the future, I want to move away from generating the build output in the build directory but that can come in a later change.
Reviewed By: LazyDodo
Differential Revision: https://developer.blender.org/D12144
This is a backport of recent development in the Cycles X branch.
Fixes possible dead-lock in viewport rendering when exiting at an
exact bad moment (couldn't reproduce in master branch, but in the
cycles-x branch it was happening every now and then).
Differential Revision: https://developer.blender.org/D12154
Makes it consistent with the guidelines and the Cycles X branch, and
allows to backport fix for the viewport update from the branch. Will
cause a merge conflict, which should be simple accept-ours in the
branch.
The library has some modifications and it has been included in a diff.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12142
(Some minor changes done in the patch)
In the `FileList` struct, rename the `AssetLibraryReference
*asset_library` field to `asset_library_ref` -- it's a description of
which asset library is used, and not the asset library itself.
This is to make space for a future `AssetLibrary *asset_library` field,
which will point to an actual asset library struct/class.
No functional changes.
Reviewed by: Severin
Differential Revision: https://developer.blender.org/D12151
This corrects code that's currently disabled, see `USE_NURBS` define.
The name passed to `BKE_curve_add` was overwritten,
bypassing uniqueness and utf8 encoding checks.
Longer names would cause a buffer overrun as the length of the source
data was passed to `BLI_strncpy` instead of the destination.
Reviewed By: sybren
Ref D12125
This caused Cycles texture_space_mesh_modifier and panorama_dicing tests to
randomly fail.
The issue was introduced with D11377, due to a missing dependency. Now ensure
we first copy the texture space parameters, and only then use or recompute then.
In general it seems like this dependency should have already been there, since
parameter evaluation includes animation and drivers, and geometry evaluation
may depend on that (even if you would not typically animate e.g. an autosmooth
angle).
Thanks Campbell for tracking this one down.
Although the relevant structs (wmXrRuntime/XrActionMap/
XrActionMapItem) are zero-allocated, the selected and active action
map indices need to be initialized to -1 to prevent potential
out-of-bounds list access.
Just like the "Select by Material" node, this node outputs a
boolean attribute for control points that have a matching handle
type. By default left and right handles are considered, but it's
possible to only check one side with the toggle in the node.
Differential Revision: https://developer.blender.org/D12135
Some mesh primitives created using geometry nodes use loops to create
vertices and accumulates positions/angles in FP variables. This allows
rounding errors to accumulate and can introduce significant errors.
To minimize changes from original implementation, variables allowing
errors to accumulate are replaced by: delta * index. Affected Mesh
Primitives nodes are Line, Grid, Cylinder, Circle, Cone, and UV-Sphere.
Differential Revision: https://developer.blender.org/D12136
Assigning a mesh seems to do its own parameter copying, which
means we need to manual copy its vertex groups here, which was
just overlooked in rB3b6ee8cee708.
Differential Revision: https://developer.blender.org/D12110
Generic attributes CD_PROP_* comparison is added in customdata_compare
Checks for built-in as well as user created attributes.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D12137
The Xcode IDE can also benefit from the options:
- WINDOWS_USE_VISUAL_STUDIO_SOURCE_FOLDERS
- WINDOWS_USE_VISUAL_STUDIO_PROJECT_FOLDERS
So add suport to these options and also renames them as they are no
longer limited to just Windows and Visual Studio.
Reviewed By: brecht, ankitm
Differential Revision: https://developer.blender.org/D12132
Practice shows that when combining actions and direct animation
it is usually best to combine location, rotation and scale
separately, which is implemented by the Split Channels modes
recently introduced in D9469 for Copy Transforms. This completes
the same set of 6 choices for the Action Constraint.
The default for new constraints is changed to the newly
added Before Original (Split Channels) mode.
The original patch is motivated by Loic Pinsard, who created
an addon that does the equivalent of this feature by splitting
the action into two, separating location and rotation+scale.
Differential Revision: https://developer.blender.org/D7547
The exception to automatically pin vertices of grid corners also
has to take into account that the vertex is in a boundary.
Reviewed By: JacquesLucke
Maniphest Tasks: T90235
Differential Revision: https://developer.blender.org/D12044
The active geometry element are usually updated by the cursor drawing
code (as they are needed for the cursor preview) and when an sculpt
operator starts. For brushes, this was not happening. This was making
brushes rely by default on the last cursor drawing update, which can
be incorrect if the mouse moved after starting the stroke without
hovering the active geometry.
Reviewed By: JacquesLucke
Maniphest Tasks: T90236
Differential Revision: https://developer.blender.org/D12045
Add warning(info) to nodes that don't work when an input value is
out of range. For example, the grid node doesn't work with Vertices X
or Verices Y less than 2.
These are purposefully added as "Info" warnings, because they don't
show in the modifier and they aren't printed to the terminal.
Differential Revision: https://developer.blender.org/D11923
The immediate reason for this is that we want to be able to initialize them
to different defaults for light objects, which is hard with Python properties.
But in general it is useful to be able to share these with other renderers.
As a side effect, Eevee now supports a per-object holdout instead of only
per-collection.
Differential Revision: https://developer.blender.org/D12133
Code freeing the array would not properly reset its length value to
zero.
Note that this corrupted data could also be saved in .blend files, so
had to bump fileversion and add some doversion code too.
Fix T90166: crash when creating a liboverride.
This was apparently done in two places only, with a very cryptic comment
(`/* for raw_access, untested */`), and... I cannot see how returning a
non-zero length value for an array that does not exist or is not
accessible at least, would be anything but an obvious source of issues.
Note that both commits adding those lines are from stone ages (2009):
rBcbc2c1886dee and rB50e3bb7f5f34.
The keymap is available in: Draw, Edit, Sculpt, Weight Paint and Vertex Paint modes.
The keymap is not available in Object mode to avoid any conflict.
Reviewed By: pepeland
Differential Revision: https://developer.blender.org/D12128
This is a simple engine used only to debug the texture of select ids.
It is only used when the `WITH_DRAW_DEBUG` option is enabled and the
debug value is 31.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D5490
Addresses the remaining portions of T77137 (Python API for Controller
Interaction), which was partially completed by D10942.
Adds an XR "action maps" system for loading XR action data from a
Python script. Action maps are accessible via the Python API, and are used
to pass default actions to the VR session during the
xr_session_start_pre() callback.
Since action maps are stored only as runtime data, they will be
cleaned up with the rest of the VR runtime data on file read or exit.
Reviewed By: Julian Eisel, Hans Goudey
Differential Revision: https://developer.blender.org/D10943
This is not supported currently,doing so through RNA API remains
possible, but from regular UI operations it should not be doable
anymore.
Ref. T90459.
LibOverride of scenes is not really supported currently, there are many
issues with it.
Will disable most user-accessible ways to create such overrides in a
following commit.
Provides two key improvements to runtime controller data.
1. Separates controller poses into two components, "grip" and "aim",
which are both required to accurately represent the controllers
without manual offsets.
Following their OpenXR definitions, the grip pose represents the
user's hand when holding the controller, and the aim pose represents
the controller's aiming source.
2. Runtime controller data is now stored as a dynamic array instead
of a fixed array. This makes the API/functionality more adaptable to
different systems.
Does not bring about any changes for users since only internal
runtime functionality is currently affected.
Reviewed By: Julian Eisel
Differential Revision: http://developer.blender.org/D12073
Vertices with no connected faces would attempt to divide by the combined
face area causing a divide by zero.
Use the same weight for wire vertices as vertices connected
to zero area faces.
Protect this accessor with a local static mutex when it needs to
create/write data.
Ideally accessors should never create or modify data, but there are some
cases where this bad behavior is currently unavoidable.
This is the case of the Pointer accessor when the actual IDProperty has
not yet been created.
NOTE: this fixes a memory leak in liboverride diffing process when
several different overrides use a same linked reference ID.
Differential Revision: https://developer.blender.org/D12060
Even though the ID itself remain the same after being made local, from
depsgraph point of view this is a different ID. Hence we need to tag all
of its users for COW update, as well as rebuild depsgraph relationships.
Should be also backported to LTS 2.93 (and 2.83 if possible).
Negative indices that remained negative after adding the sequence length
caused incorrect slicing.
With the default scene for example:
bpy.context.scene.objects[-4:2]
Gave a different result to:
tuple(bpy.context.scene.objects)[-4:2]
Clamp indices above zero so loops that step forward works as intended.
Provides several important improvements to the runtime action
bindings operation and internal API.
Moves input-specific action data (input thresholds, input regions,
pose offsets/spaces) from actions to more granular action bindings.
This allows a single action to be mapped to a variety of inputs,
without having to share a single input threshold, region, or space.
Also removes the need for action space creation API, as spaces for
pose actions will be automatically created with the bindings.
The correct action data for the current inputs is set by calling
xrGetCurrentInteractionProfile() to get the current profile and then
retrieving the corresponding mapped data.
Does not bring about any changes for users since only internal
runtime functionality is currently affected.
Reviewed By: Julian Eisel
Differential Revision: http://developer.blender.org/D12077
This adds support for building the icons from make.bat
unlike bash there is no passing environment variables
on the command line.
The scripts go out of their way to locate both blender
and inkscape however if they are not found, the user is
given a helpful error message telling them how to set
the variables.
Although some extra help can be given there, if your
normal build is a 2019 full build running
`make 2019 full icons`
will help it find the blender executable as well.
finally if you know the name of your build folder
running
`make builddir build_windows_Lite_x64_vc16_Release icons`
will also work, if all fails you can point directly to
the blender executable by running
`set BLENDER_BIN=c:\where\blender\lives\blender.exe`
before running `make icons` or `make icons_geom`
The python scripts needed some small modifications since
without the PATHEXT, SystemRoot and SystemDrive
environment variables python will not initialize properly
on windows. (Not blender related, even mainline python
won't start without those)
GHOST_ImeWin32::SetInputLanguage() has a confusing name because it does
not set the input language. It actually retrieves the current input
locale from the OS and caches the value of the current input language
ID. Therefore this patch renames it to "UpdateInputLanguage"
Differential Revision: https://developer.blender.org/D12134
Reviewed by Ray Molenkamp
This removes one member of GHOST_ImeWin32 that is not used and cannot
be used in the future. It is holding the result of ImmIsIME, which is
whether an input language supports IME. It does not indicate that one
is in use, turned on, composing, in English mode, etc.
see D12131 for more information.
Differential Revision: https://developer.blender.org/D12131
Reviewed by Ray Molenkamp
This makes the internal naming consistent with the public API. And also gives
us a visibility_flag rather than restrictflag that can be extended with more
flags.
This patch makes us less restrictive on the allowed types of FreeType
font character maps we allow, rather than primarily unicode-only. This
allows us to use some legacy, symbol, specialty, and proprietary fonts
like Wingdings. Note we were a little less restrictive with vfonts,
used for 3D Text Objects, so this patch primarily helps VSE.
See D12124 for details and examples.
Differential Revision: https://developer.blender.org/D12124
Reviewed by Brecht Van Lommel
When displaying the names of fonts for 3D Text objects, use the same
format as shown in File Browser: Family name + Style name. They are
currently shown with Postscript Name, which doesn't match well.
see D12069 for more details.
Differential Revision: https://developer.blender.org/D12069
Reviewed by Campbell Barton
The goal: allow to easily use AO approximation in scenes which combines
both small and large scale objects.
The idea: use per-object AO distance which will allow to override world
settings. Instancer object will "propagate" its AO distance to all its
instances unless the instance defines own distance (this allows to
modify AO distance in the shot files, without requiring to modify props
used in the shots.
Available from the new Fats GI Approximation panel in object properties.
Differential Revision: https://developer.blender.org/D12112
This is used to set the default caps type for the stroke. Before always was rounded and only could be changed later in Edit mode
Two new buttons has been added to topbar.
NOTE: New icons are been designed (T90414)
The buttons are expanded to list in Properties panel.
Reviewed By: mendio, HooglyBoogly
Differential Revision: https://developer.blender.org/D11999
rBfb87d236edb7 made the values returned by `projmat_dimensions` more
standardized following the documentations. But the functions in Blender
that called `projmat_dimensions` followed a proposal that these values
corresponded to a distance of 1m of clip.
Adjust these functions to follow the new algorithm.
This patch fixes an issue with missing faces when assigning a material slot other than the first to faces on AMD TAHITI cards. Refer to T78390 and T74024 for a description of this issue.
This patch also incorporates fix from T78390 for KAVERI.
{F9029258}
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D9305
Rename new API function introduced in recent rB3b0fab6dfaa0 to match our
convention to put the action (verb) at the end of names:
`operations_update`.
Sorry for not catching that during review.
Previous check was too blunt, preventing e.g. re-organization of
collection overrides inside a local parent collection, which is
perfectly valid operation.
Reported by @hjalti from the studio, thanks!
Loopcut drawing from gizmo had thicker lines because
it was using line smoothing without alpha blend, compared
to thin jagged lines from operator.
Make the drawing anti aliased and consistent by using
3D_POLYLINE/3D_POINT shaders, and making sure alpha
blending is on.
Reviewed By: #eevee_viewport, fclem
Differential Revision: https://developer.blender.org/D11333
While most modifies don't handle out of memory cases, ocean simulation
could attempt huge allocations: 2048 gb at the maximum resolution.
Resolves T83952.
The update_operations function will update the override structure of the
local object. When working with overrides the override structure is only
updated when the work-file is stored. When using scripts you might want
to enforce the update of override properties and operations.
This function removes a hack on the test cases.
Reviewed By: mont29
Maniphest Tasks: T86656
Differential Revision: https://developer.blender.org/D10848
This patch changes the drop named material tooltip to give feedback to
the user what is going to happen when they invoke the change.
There are 3 states:
* "": Operator will be canceled as not all data is present (dropping on
background.)
* "Drop <named material> on <object name> (slot <slot number>, replacing
<current material in slot>).
* "Drop <named material> on <object name> (slot <slot number).
Reviewed By: Severin
Maniphest Tasks: T90371
Differential Revision: https://developer.blender.org/D12106
This node sets the selected (or all) splines in curve to a chosen target
spline type. Poly, Bezier, and NURB splines can be converted to any of
the other types. This is meant to be a building block node, useful in
many procedural situations.
In the future the node could be optimized with multi-threading, or by
avoiding copying in many cases, either by retrieving the curve for write
access or by passing the raw vectors to the new splines where possible.
With edits from Hans Goudey (@HooglyBoogly)
Differential Revision: https://developer.blender.org/D12013
`r_left`, `r_right`, `r_bottom` and `r_top` were ignoring `clip_near` value
when in perspective view.
Also rename `projmat` to `winmat` in these cases.
For some reasons looks like those shortcuts could get out of sync, which
created weird hard to understand building errors.
So for sake of simplicity and security, just re-create them all the
time, just like we update ld paths.
For Blender.app: dropping libomp.dylib next to Blender executable is
enough for it getting picked up since `@executable_path` is an rpath.
For non-distributed binaries datatoc, makesdna, tests etc, code for
copying libomp.dylib to build folder is removed and replaced by
CMake's rpath option for *build* tree.
For bpy.so, the post build rpath change has also been replaced by CMake
rpath option for *install* tree.
Since -id has been changed in D11748, remove the
`install_name_tool -change ...` command.
Any dylib can just be dropped at `MAC_BLENDER_TARGET_DYLIBS_DIR`
hereafter. Appending dylib path to `CMAKE_BUILD_RPATH` will be needed
for datatoc etc if linked against one (instead of copying the
dylibs around).
Reviewed By: #platform_macos, brecht
Differential Revision: https://developer.blender.org/D11997
While this was already the case for the most part
some selection operators stored common settings for reuse such as
"toggle", "extend" & "deselect".
Disabling storing these settings for later execution
as it means failure to set these options in the key-map re-uses
the value of the shortcut that was last called.
Skip saving these settings since this is a case where reusing them
isn't helpful.
Resolves T90275.
Fix division by zero when `BKE_bone_parent_transform_invert()` inverts a
scale vector with zero components.
Zero values in the to-be-inverted vector are now simply skipped, i.e.
remain zero after inversion. This at least ensures that
`invert_v3_safe(invert_v3_safe(vector))` results in the same vector.
This commit does NOT fix the conceptual problem that an inversion of a
potentially non-invertible vector is relied upon. It just avoids the
division by zero.
When channels are scrolled to be (partially) behind the search bar,
their widget buttons would still be interactive, preventing the seach
buttons to be usable.
We have to make sure the events are consumed from the search and dont
reach other UI blocks.
We can do so by flagging the block `UI_BLOCK_CLIP_EVENTS` -- but also
have to make sure the bounds are calculated correctly (otherwise the
check relating `UI_BLOCK_CLIP_EVENTS` in `ui_but_find_mouse_over_ex` wont
trigger properly.
Maniphest Tasks: T90364
Differential Revision: https://developer.blender.org/D12103
When calculating the particle step in `get_effector_tot`, we have to
round up (otherwise we might get an extra round in the for-loop in
`BKE_effectors_apply` for certain cases).
Example from the report:
- 10.000 particles, Effector Amount 3
- was rounding the step down to 3333
- going into the for-loop for 0, 3333, 6666 and 9999 (4 times)
- now rounding the step up to 3334
- going into the for-loop for 0, 3334 and 6668 (3 times as desired)
Maniphest Tasks: T90346
Differential Revision: https://developer.blender.org/D12113
Extend the 'reading error' container to produce the generic short
message in the popup directly visible by the user, and move all detailed
info the `INFO` reports that only show up in the console and Info
editor.
This is an initial implementation of a USD importer.
This work is comprised of Tangent Animation's open source USD importer,
combined with features @makowalski had implemented.
The design is very similar to the approach taken in the Alembic
importer. The core functionality resides in a collection of "reader"
classes, each of which is responsible for converting an instance of a
USD prim to the corresponding Blender Object representation.
The flow of control for the conversion can be followed in the
`import_startjob()` and `import_endjob()` functions in `usd_capi.cc`.
The `USDStageReader` class is responsible for traversing the USD stage
and instantiating the appropriate readers.
Reviewed By: sybren, HooglyBoogly
Differential Revision: https://developer.blender.org/D10700
The file selection parameters (e.g. `context.space_data.params`) are
expected to be unset in certain cases. Reading 2.4 files seems to be one
of them. Hence, code using it should check it's set first. Also added an
assert to a File Browser UI template printing a message when the
parameters are unset, to help debugging the issue.
Only the "changed" state from the last edit-object was used,
this meant the operator would not perform the necessary update
with multi-object edit-mode.
Use "changed" & "changed_multi" naming convention.
Even though lights were part of `SceneStats`, they were not used when
rBfd10ac9acaa0 was committed.
This patch adds the light count back into the statistics. When a light is
the active object, it will display the total number of lights in the
scene, as well as how many lights are currently selected.
{F10141354}
Reviewed By: #user_interface, Severin, Blendify, harley
Maniphest Tasks: T88512
Differential Revision: https://developer.blender.org/D11387
For T78995 we want to change the data structure of keylists to
improve performance. (Probably a Vector with bin-search capabilities).
This patch hides the internal structure of the keylists behind `AnimKeylist`
structure. This allows us to change the internals without 'breaking' where it is
being used.
The change adds functions to create, free, find and walk over the
keylist.
Reviewed By: sybren
Maniphest Tasks: T78995
Differential Revision: https://developer.blender.org/D11974
Currently when dropping an asset the first material slot is always updated.
This patch changes that logic to update the active material slot.
In future the behavior will be updated to use the material slot of the face under the cursor.
That requires better feedback tot he user.
Reviewed By: Severin
Maniphest Tasks: T90372
Differential Revision: https://developer.blender.org/D12056
Setting normals from faces wasn't weighting the faces contribution
by the corner angle, giving lop-sided results in some cases.
This removes the epsilon check for CLNORS_VALID_VEC_LEN,
in favor of matching the behavior of vertex normals exactly.
It will be useful in the spline type conversion node. Theoretically it
could become protected again if that conversion moves out of a node,
which might be a nice improvement after an initial version.
Because mesh vertex and face normals are just derived data, they can
be calculated lazily instead of eagerly. Often normal calculation is
a relatively expensive task, and the calculation is often redundant
if the mesh is deformed afterwards anyway.
Instead, normals should be calculated only when they are needed. This
commit moves in that direction by adding a new function to tag a mesh's
normals dirty and replacing normal calculation with it in some places.
Differential Revision: https://developer.blender.org/D12107
This commit uses OpenVDB more directly for the voxel remesher, without
the extra indirection of copying to a Blender API. This makes the code
simpler, shorter, and easier to understand (though I didn't observe any
performance improvement).
This also removes the rest of the unused and undocumented OpenVDB C API,
which was written when Blender's code didn't really use C++, and doesn't
serve a purpose anymore. Those features will be implemented as nodes in
the future anyway (see D12100).
Differential Revision: https://developer.blender.org/D12097
Caused by rB7fc60bff14a6.
This has actually been reported and closed, but that was clearly a
misunderstanding (above commit changed a checkbox to be an enum, but a
second checkbox was simply removed)
Maniphest Tasks: T78469
Differential Revision: https://developer.blender.org/D12084
This is causing issues for some users launching Blender, because EGL indirectly
requires GLVND, which is not installed by default on e.g. Ubuntu.
This reverts commit 0b18a618b8.
Fixes T90374
Ref D12034
Caused by {rBbbb2e0614fc3}
Since above commit only the playhead is updated as an overlay in
animation playback (was moved out of drawing of the main region for
perfomance reasons).
The driver value "debug" visualization is very useful to have during
playback though but was left in main region drawing as part of
`draw_fcurve` (thus does not update in realtime anymore).
Moving `graph_draw_driver_debug` into the overlay is not feasible
because it requires animation filtering which has significant overhead
which needs to be avoided in the overlay which is redrawn on every UI
interaction.
Now tag the whole main region for updates in the Driver Editor during
playback instead (which will make the Drivers Editor as slow during
playback as before rBbbb2e0614fc3 -- but with realtime updates of the
debug visualization).
Maniphest Tasks: T87041
Differential Revision: https://developer.blender.org/D12003
Add a context menu dedicated to asset operations to the Asset Browser.
There are two separate context menus to keep things separated well and
avoid confusing if-else logic (similar to D12057 & D12059). Their polls
make sure they are displayed for the right contexts only.
Also (to be committed as followup cleanup): Remove now unused special
handling for assets in file delete operator.
Differential Revision: https://developer.blender.org/D12062
So far the Asset Browser just showed the same popups and settings as the
File Browser. Not all of them made sense for the Asset Browser though.
* Don't show inapplicable recursion toggle.
* Don't show sorting options, which don't work with assets anyway.
* Don't show the Filter popover, there are currently no applicable items
in there.
Just like in D12057, I decided to add separate classes for the Asset
Browser case.
Differential Revision: https://developer.blender.org/D12059
So far the Asset Browser just showed the same menus as the File Browser.
Not all of their entries made sense for the Asset Browser though. I
decided to just give them entirely different classes to avoid confusing
if-else checks everywhere. I think the code duplication this adds is a
minor issue, it's better to keep things seperated clearly IMO.
* View menu: Add "Asset Details" toggle for the sidebar region.
* View menu: Remove recursion sub-menu
* View menu: Remove "File Path" region toggle, which doesn't apply for
the Asset Browser.
Differential Revision: https://developer.blender.org/D12057
Originally the operator name was drawn next to the dragging content.
After that there was an option to add custom, static text with the
dragging content. This patch allows dynamic text to be drawn.
The custom text was implemented as out parameter of the poll function
what made the code unclear. This patch introduces a tooltip function
that separates tooltip generation from the poll function.
NOTE: the text should always be returned in its own memory block. This
block will be freed after it is copied in the drag struct.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D12104
`CPPType` can wrap any C++ type so that code can work
with the wrapped type in a generic way. The goal of subclassing
`CPPType` is to provide additional methods for some types.
For example, the `CPPType` for `Array<int>` could have a `.element_type()`
method that returns the `CPPType` for `int`.
Initial, limited implementation of loading a single asset catalog
definition file. These files are structured as follows:
CATALOG_ID virtual/path/of/catalog
SUBCATALOG_ID virtual/path/of/catalog/child
SOMETHING_ELSE some/unrelated/hierarchy
These virtual paths will be used to show the catalog in a tree
structure; the tree structure itself is not part of this commit. Each
asset will have one catalog ID that determines where in that tree the
asset shows up.
Currently only a single catalog definition file can be read; merging
data from multiple such files, and writing them out again after changes
are made, is for future commits.
This commit only contains the code to load a single file, and unittests
to check that this actually works. No UI, no user-facing functionality
yet.
The real fix here is to use some kind of relative error in `customdata_compare`
instead of the absolute error used now. If vertex coordinates get larger in magnitude,
the allowed error should increase as well.
When entering characters using IME on Windows, Japanese and Chinese
will both usually result in the first keystroke being duplicated. The
problem is that we are informed too late, after the first key is
pressed, that we are IME composing. This patch ensures we are entering
non-English characters using ImmGetConversionStatus() and then deals
with editing keys (like arrows and backspace) on a per-language basis.
see D11929 for more details.
Differential Revision: https://developer.blender.org/D11929
Reviewed by Brecht Van Lommel
Retrieving a mesh's looptris now take's a const mesh after
rB5f8969bb4b4, which removes the need for this function.
Since it's only two lines, avoiding the use of a separate function
in this case is simpler.
These functions do not change their source or input mesh, so it can
be passed with const, which means in one case that a function doesn't
have to be responsible for freeing its argument mesh, which is a clearly
better separation of concerns.
By the patch made it in master the version value already advanced (see https://developer.blender.org/D11839), so this versioning code needs to be moved down to that point.
This BMesh iterator hadn't been used in C++ code yet, and needed
a macro for a proper cast. The parameter structs need to be initialized
when declared without designated initializers.
They are now always shown in the top-level of the Outliner context menu.
Having them in the ID Data submenu was just a hassle to work with, and
often confusing to users - even if technically correct (the asset status
is part of the ID data).
Part of T82680.
These operators shouldn't be available in the Asset Browser.
https://developer.blender.org/T83556
Added a comment to each operator poll assignment to explicitly mention
the intention. That should also remind devs to decide if the operator
should apply for both file & asset browsing when copy & pasting operator
definition code.
The operator to drop file paths into the File Browser was just checking
if there's an active window. This wasn't really an issue since the
operator was only used as drop-operator for the File Browser. But the
operator would show up in the operator search. Plus, for asset browsing,
we'll also have to check the file browsing mode, so the more specific
poll function will be needed.
* Early exit instead of complex if-else blocks.
* Avoid iterating over entire file list.
* Use `true`/`false` for boolean values.
* Declare variables in smaller scopes.
The Windows-specific "Register File Association" operator would show in
the search menu of other platforms. Decided to not disable it at
compile-time, like we do it with "Toggle System Console" (another
Windows-only operator), because that would require workarounds for the
translation tools. Instead the operator poll function always returns
false on unsupported platforms now.
The operator was register as a "file" operator, which are by convention
used for File Browser operators only. Move it to the "preferences"
operators, where it's displayed in the UI too.
This partially reverts cb0b017d8f: We can't store the asset handle in
the drag data, because the file pointer it wraps may be freed as the
Asset Browser generates its file list.
In `BKE_appdir.h`, include `<stddef.h>` as that defines `size_t`. This
follows the "include what you use" principle, and makes it possible to
use `BKE_appdir.h` without having to bother with its dependencies.
No functional changes.
Registering a property could remove the existing property,
then fail to parse one of the arguments of the new property -
leaving the struct without a property.
Now freeing the existing property is deferred until immediately
before the new property is registered.
- Use `default` instead of `def` abbreviation.
- Rename `BPYPropArrayLength` to `BPyPropArrayLength`
in keeping with other local structs.
- Remove _PyArg_Parser.fname value accidentally left in
(harmless as it's not used).
Macros were used for expanding shared logic for some properties.
Replace this with Python converters & a funciton that handles
deferred registration.
Add generic converter functions for RNA enums:
- pyrna_enum_value_parse_string
- pyrna_enum_bitfield_parse_set
After doing an import, the bounding box of the stroke was not calculated and any operation related to brushes (Sculpt, Weight Paint and Vertex Paint) was not working as expected because the bounding box of the stroke was wrong.
This problem was solved automatically after any edit operation, but must be solved in the import process.
This commit resolves these RNA warnings:
```
offset: "", WARN (bpy.rna): ...\source\blender\python\intern\bpy_rna.c:1505 pyrna_enum_to_py: current value '65536' matches no enum in 'FloatProperty', 'offset', 'subtype'
project_limit: "", WARN (bpy.rna): ...\source\blender\python\intern\bpy_rna.c:1505 pyrna_enum_to_py: current value '65536' matches no enum in 'FloatProperty', 'project_limit', 'subtype'
falloff_radius: "", WARN (bpy.rna): ...\source\blender\python\intern\bpy_rna.c:1505 pyrna_enum_to_py: current value '65567' matches no enum in 'FloatProperty', 'falloff_radius', 'subtype'
```
This will replace GLX with EGL for X11. GLEW does not support GLX and EGL
at the same time. Most distributions build GLEW with GLX support, so we
have to use the externally provided GLEW and build with EGL support.
This effectively sets WITH_SYSTEM_GLEW to OFF for all Linux configurations.
Differential Revision: https://developer.blender.org/D12034
In the graph editor, Mirror Keys by Value would convert the value to mirror
over, to account for different units for linear & rotational properties.
The conversion was done in the different direction, though, resulting in
values that were too large by a factor of (180/pi)^2.
This caused a blender load error on windows N,
given we do not use these codecs they can safely
be disabled.
This will fix T90200 once the new libraries are
in SVN
It was somewhat arbitrary to have this one pass enabled that adds a bit of
additional memory and render time overhead, even though it's not necessarily
more important than others.
Before this, all asset view templates showing the same asset library
would show the same assets, even if they should show different ID types.
That was a major limitation since the design did forsee that this
template can be put anywhere in the UI to display various sub-sets of
assets.
Initially I did the ID type filtering close to the asset-list reading,
because I wanted to optimize reading so that we would only actually read
asset information from disk of the ID type to be shown. But this will be
quite complex and I'm not sure if I'll get to work on this anytime soon.
So this commit moves the filtering to the template display level solving
this limitation.
Note: This also adds the code to filter by tags, together with the ID
type. But it's not actually used anywhere yet.
This iterator was introduced before `AssetHandle` existed, so it was
dealing with the file data directly. Now we want as little code as
possible to deal with the file data, all access should happen via the
`AssetHandle`.
This has been a huge pain to get working, for several reasons (new flags
needed, patching is now mandatory, etc.).
Further more, discovered that debian OIIO package is now silently
relying on OpenCV, without even proper handling of this dependency (at
least in the `-dev` package), so had to revert to force-build own OIIO
again on that distro for the time being.
Ref. T88438.
When `BLI_task_parallel_mempool` does not use threading, the
`userdata_chunk` is allocated locally simulating a TLS.
However `func_reduce` is not called so the original chunk is ignored.
`task_parallel_iterator_no_threads` is another function that doesn't call
`func_reduce`. It also ignores `userdata_chunk_local` in the main iterator.
The solution in these cases is not to create a `userdata_chunk_local`.
This fixes T90131
Differential Revision: https://developer.blender.org/D12067
We shipped the whole bin folder for llvm/clang
while we only needed clang-format, by shipping
just the bits we need we save about 700 megabytes
off our svn lib download.
The preview was always using frame 1, but maybe the object has changed and it's better create preview using the current frame.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D12018
Motion attributes expects mesh to have non-zero number of motion steps,
which was violated in the case when fluid mesh had motion blur disabled.
This is a bit of annoying fix, because of the order of updates. More
ideal solution would be to handle cached and fluid velocities in the
sync_mesh_motion() which ensures all the dependencies between settings.
Add overlay option to disable grid drawing.
Reuse drawing code from other editors (timeline editor)
Add argument `display_minor_lines` to function
`UI_view2d_draw_lines_x__discrete_frames_or_seconds`
This way minor line drawing can be disabled and so it doesn't cause
too much visual noise. Also spacing seems to be too fine, so VSE uses 3x
what is defined in preferences.
Reviewed By: fsiddi, Severin
Differential Revision: https://developer.blender.org/D11790
Snapping by default goes against convention, so this setting was
re-evaluated. Also snapping by default can conflict with new image
transform system, see T90156
There wasn't consensus, so disable snapping by default to follow
established convention.
ref T89665
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12054
Calculate frequency of time/frame label drawing, such that labels have
at least 10px margin and don't overlap.
Change timecode format:
- Use at least `mm:ss` format
- Don't display frames if all labels would end with +00
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D11792
The channel box selection was offset for grease pencil layers.
This is a proposed fix by @yann-lty
Before:
{F10227973}
After:
{F10227974}
Reviewed By: #grease_pencil, antoniov
Maniphest Tasks: T89952
Differential Revision: https://developer.blender.org/D11962
- Multi-dimensional boolean, int and float vector types are supported.
- A sequence of int's for the "size" is used to declare dimensions.
- Nested sequences are required for default arguments.
Now it's possible to define matrix properties, for e.g:
bpy.props.FloatVectorProperty(size=(4, 4), subtype='MATRIX')
Add array conversion functions that take dimension arguments.
- PyC_AsArray_Multi (version of PyC_AsArray).
- PyC_Tuple_PackArray_Multi_* (version of PyC_Tuple_Pack_*).
When viewing font files in the File Manager, this patch uses the font's
family and style names to show the same type of string shown to users
in operating system lists. For example "Book Antiqua Regular" instead
of "BKANT.ttf"
see D12020 for details and examples.
Differential Revision: https://developer.blender.org/D12020
Reviewed by Campbell Barton and Julian Eisel
WITH_CYCLES_DEBUG was used for rendering BVH debugging passes. But since we
mainly use Embree an OptiX now, this information is no longer important.
WITH_CYCLES_DEBUG_NAN will enable additional checks for NaNs and invalid values
in the kernel, for Cycles developers. Previously these asserts where enabled in
all debug builds, but this is too likely to crash Blender in scenes that render
fine regardless of the NaNs. So this is behind a CMake option now.
Fixes T90240
When using "Clear Asset" from the Asset Browser but with an asset
selected that is not stored in the current file, we can show a more
informative error message.
The viewer node in geometry node trees only supports geometry nodes.
This patch ensures that when ctrl shift clicking on a node, it will only
link to geometry sockets.
Differential Revision: https://developer.blender.org/D12055
This code was actually buggy (forcefully re-enabling excluded layers in some
cases).
Further more, it should not be needed now that layerCollection resync code
reuses as much as possible existing layers instead of deleting and
re-creating them all the time.
Differential Revision: https://developer.blender.org/D12016
The goal of this refactor is to improve resync of LayerCollections
hierarchy to match again Collection one.
Current code would destroy and re-create valid layers whenever a parent
collection would be removed, which leads to losing way too often
layer-related settings when editing collection hierarchies.
While this could be partially addressed from operators side, there was
no way to fix those issues from lower level, more generic ID management
code like ID remapping or library override resync processes.
The new code builds a shallow wrapper around existing (aka old) layers
hierarchy, does a set of checks to define the status of all existing
layers, and try to find the closest matching unused layer in cases where
layers and collections hierarchies do not match anymore.
The intent is to both re-use as much as possible existing layers, and
to pick the 'best' possible layer to re-use, following those heuristics:
* Prefer layers children of current one first (in old hierarchy), and only
use those from other higher-level hierarchies if no (grand-)child is found.
* Prefer to use closest layers available in the old hierarchy.
NOTE: The new code is about 12%-15% slower than the previous one, which is
expected given the increased complexity. Note that this would not be an
issue in practice if this code was not called way too often (needs to
be converted to lazy update instead, which is a long known TODO).
NOTE: The LayerCollectionResync code uses its own built-in version of
FIFO queue, as performances in this code is currently a critical point
(it can get called tens of thousands of times during a single (heavy)
ID management operation currently, in a production file e.g.).
Differential Revision: https://developer.blender.org/D12016
When deleting a node, links attached to that node are deleted, but if one
of those links was connected to a multi input socket, the indices of the
other links connected to it were not updated. This adds updates both in
the case of a normal delete as well as after a delete with reconnect.
Differential Revision: https://developer.blender.org/D11716
Followup to rB3834dc2f7b38 (where getting the proper particle system was
fixed for the Adjust Last Operation panel in the Properties Editor). But
since this operator can also be called from the 3DView, get a current
particle system there as well.
Without this, _all_ particle systems would be copied when executing from
the 3DView (which was never really intended [operator description uses
singular] -- it just happens to use `copy_particle_systems_to_object`
internally as well -- same as the `Copy Active/All to Selected Objects`
operators)).
ref. T83317
Maniphest Tasks: T83317
Differential Revision: https://developer.blender.org/D12033
Caused by {rB8cbff7093d65}.
Since above commit only one modifier would get calculated and the
displaylist boundingbox was calculated wrong.
Maniphest Tasks: T90154
Differential Revision: https://developer.blender.org/D12037
Expand camera effective region to a portion beyond image frame so strokes won't end right at the border.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12049
Recent own rBabf3ce811f6e prevented any LayerCollection update during
the whole liboverride resync process, for both performances and feature
reasons.
However that means that the various runtime caches like the Base GHash
are not cleared anymore during ID remapping process, so we need to call
`BKE_main_collection_sync_remap` instead of `BKE_main_collection_sync`
when we finally are ready for this update.
Reported by @eyecandy (Andy Goralczyk) from Blender studio, thanks!
This patch adds propper tooltips to the effect strips in the "Add" menu.
Note that not all effect strips are actually in the "Effect Strips"
submenu like color strips, text strips or transitions. For these types
of effect strips, a dediacted tooltip is especially useful.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D11714
While transforming a strip, draw the background semi-transparent
if it overlaps with another strip. It's convenient to see what's
underneath, especially with the upcoming Overwrite feature.
Thanks to @iss for the help and review.
Pass `-DLINKSTATIC=ON` to the OSL CMake, to ensure it statically links to
our libpng. Previously this was only applied on Windows, it's now on all
platforms.
Add three functions that trim characters from the front & end of a
`StringRef`. All functions return a new `StringRef` that references a
sub-string of the original `StringRef`.
- `trim(chars_to_remove)`: strips all characters from the start and end
that occur in `chars_to_remove`.
- `trim(char_to_remove)`: same, but with a single character to remove.
- `trim()`: remove leading & trailing whitespace, so same as
`trim(" \r\n\t")`
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D12031
Runs tests based on blend files with minimum python interaction.
Developed as part of GSoC 2021 - Regression Testing of Geometry Nodes.
Earlier, tests were built from scratch by adding a modifier/operation
from the Python API.
Now, tests can also be created inside blender and are compared using
Python script.
Features: Automatically adding expected object if it doesn't exist.
This patch adds tests for the following Geometry Nodes category:
* Curves
* Geometry
* Mesh
* Points
The implemented UML diagram for refactoring of mesh test framework.
{F10225906}
Technical Changes:
SpecMeshTest: It adds the modifier/operation based on the Spec provided.
BlendFileTest: It applies already existing modifier/operation from the blend file.
Test folders hierarchy with tests. This folder should be extracted to `lib\tests\modeling`
{F10240651}
Note: The `geometry_nodes` folder might lie under another `geometry_nodes` folder while extracting, please double check. Use the inner-most one.
The hierarchy should be:
-`lib\tests\modeling\geometry_nodes\mesh`
-`lib\tests\modeling\geometry_nodes\points`
and so on.
* From `ctest` the tests should be run as `ctest -R geo_node -C [Configuration]` on Windows.
* Each single test can be run with its entire name e..g `ctest -R geo_node_geometry_join_geometry`.(just an example). Run `ctest -N -R geo_node` to see all tests.
* From blender, the tests can be run `blender -b path\to\blend\file --python path\to\geo_node_test.py`
Reviewed By: zazizizou, JacquesLucke
Differential Revision: https://developer.blender.org/D11611
Failure to return a list of the expected size & type wasn't
decrementing the value, leaking a reference.
Caused by 127b5423d6 a workaround for the
real error that was fixed f5e020a7a6.
This adds the operator name to the node label which is consistent with the shading nodes.
The vector node has `Vector` as a prefix.
The Attribute nodes already have a different coloured header.
The same label is used when collapsing nodes, this helps readability.
Reviewed By: pablovazquez
Differential Revision: https://developer.blender.org/D10749
Builtbot is switching over from json to yaml. Both
configuration files should be kept in sync for now.
The json file will be removed when everything works as expected.
Ths commit adds a new `IDNameLibMap` to `Main`, used during file reading
to quickly find already read linked IDs.
Without that, search would use string-based search over list of linked
data, which becomes extremely slow and inneficient in cases where a lot
of IDs are linked from a same library. See also {T89194}.
Extrem-usecase reported in T89194 is now about 4 times faster in linked
data reading (about 2 times faster for the whole .blend file loading).
More normal cases (like Sprites studio production files) have barely
measurable speed improvements, a few percents at best.
NOTE: `main_idmap` API was extended to support insertion and removal of
IDs from the mapping, avoids having to re-create the whole thing several
time during libraries expansion in readcode.
Differential Revision: https://developer.blender.org/D11757
Makes it so Render Layers node in the compositor is updated as soon
as Use Denoising is changed for the final render.
Differential Revision: https://developer.blender.org/D12010
This diff somewhat snowballed out of updating OIDN to 1.4.1 it had some
changes that allowed us to remove the arm hacks we had in place and
revert to using identical versions for a whole bunch of deps. But that
required an update to ISPC which needed a newer LLVM and if we're
updating LLVM we may as well update OSL, and when we update OSL, OIIO
may as well be dragged in soo......anyhow...
This diff updates:
LLVM 9.0.0 (11.0.1 for mac/arm) -> 12.0.0
OIIO 2.1.15.0 -> 2.2.15.1
OSL 1.11.10.0 -> 1.11.14.1
winflex_bison 2.5.5-> 2.5.24 (ispc needed newer bison, windows only dep)
OIDN 1.4.0 -> 1.4.1
ISPC v1.14.1(random hash for mac/arm) -> v1.16.0
Flex 2.6.4 (ISPC needed newer Flex than available on CentOS 7)
and removes most of the "special arm/mac" versions. I think just ssl and
embree are left with special versions.
notable changes:
@LazyDodo included some clang headers in the linux/mac harvest which are
needed to start writing custom clang based tooling like D9465 these were
already shipping on windows, but not the other platforms.
[macOS] Change the `LC_ID_DYLIB` of OpenMP for {D11997}. This changes
where the executables look for dylibs.
Reviewed By: sebbas, LazyDodo
Differential Revision: https://developer.blender.org/D11748
This patch fixes occlusion function to handle one specific case (when an edge shares a point with triangle) better,especially when there's overlapping edges in this case.
Previously, this option was not exposed in the UI, only for the clip editor.
There were also multiple rna properties that did the same thing for each of the 2D editors.
There was also an issue where the property enum items were the same as the 3d view which didnt make much sense.
Reviewed By: antoniov
Differential Revision: https://developer.blender.org/D12027
When using a pose slider it is possible to hide bones with the 'H' key.
Before this patch the screen didn't update, so you had to move the mouse 1 pixel to update.
This patch makes it so it updates right away
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D12024
Ref: D12024
Adds full frame implementation to this node operation.
No functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11627
Adds full frame implementation to this node operations.
No functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11749
Adds full frame implementation to this node operations.
No functional changes.
Includes a new operation method `init_data` used to initialize any data
needed after operations are linked and resolutions determined.
Once tiled implementation is removed `initExecution` may be renamed
to `init_rendering` and `init_data` to `init_execution`.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11944
This fixes a performance regression on Ampere cards, on specific scenes like
classroom. For cycles-x there is little difference, but this is still helpful
for LTS releases, and we need to upgrade at some point anyway.
This is an easy & safe, yet not-so-nice way to address the
LayerCollections vs. Collections hierarchy resync problem.
Currently this resync is enforced everytime something changes in the
Collections hierarchy, which is extremely inneficient, and can even
produce 'loss' of LayerCollection data during complex Collection
processes.
Current example is during Library Overrides resync process. New code:
* Makes resync significantly faster (between 10 and 15%).
* Fixes 'disappearing' layer collections settings on sub-collections'
layers.
NOTE: This is not a proper fix for the underlying issue. However,
implementing and testing the 'lazy update' solution as proposed by
{T73411} requires a significant amount of time (especially in testing
and tracking all places where code would need to ensure LayerCollections
are up-to-date), which is not possible currently.
Differential Revision: https://developer.blender.org/D11889
Mantflow only supports wavelet noise, thus the parameter with only one option is no longer useful.
Differential Revision: https://developer.blender.org/D6770
In the draw module, it's not easy to identify what its header is, and
where the shared functions are.
So move `draw_cache_extract_mesh_extractors.c` and
`draw_cache_extract_mesh_private.h` to the same folder as the extractors
and rename these files to make them more identifiable.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11991
Fix hold offset check causing missing snapping point when strip have
only still frames.
Fix effect strips of transformed strips causing snapping to prevoius
strip positions.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11948
Label for snapping current frame to strips was cut off and not very readable.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D11951
Cached OCIO processors were not freed, instead the color spaces were freed twice.
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D12011
Fix for T85517
Bug: Couldn't type space while holding down the shift key in text spaces (e.g. when saving a file, changing the name of object).
Changes: Removing the key combination of Shift + space in `WM_event_is_ime_switch` method.
Reviewed By: harley, mont29
Maniphest Tasks: T85517
Differential Revision: https://developer.blender.org/D10452
Six years ago, Bug T44961 about unwanted spikes had me not do a loop
slide if the angle was too extreme, to avoid unwanted spikes.
The current bug showed that that angle was much too big, and limited
desired behavior in many cases. Changing the angle from 0.25 radians
to 0.0001 radians (about 0.006 degrees) still fixes the original bug
and seems very unlikely to be limiting desired behavior now.
The old modifier code, now just used for Fast, has code in it to
flip faces of arguments when their tranform's negativity differs
from the main object's transform's negativity.
I had neglected to put that logic in when I made the change that
skipped the round trip through BMesh.
Fixing this means that the results are more what the user expects
when some or all operands have negative scales.
This patch addresses the issue raised in T88340.
When entering a pose sliding operator bones would automatically get hidden.
While technically not a bug it was decided that it is too confusing.
Hiding with 'H' is still possible though, just won't happen automatically
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D11883
Ref: D11883
Abbreviations are harder to read and understand thus it is best to be direct.
For example without understanding and context it is hard to know exactly what "Len" means.
This change transitions libmv/osd tests to our
blender_add_test_executable macro that explicitly
takes the include directories as a parameter.
This is in preparation for future clean-up of
global include directories.
Differential Revision: https://developer.blender.org/D12012
Reviewed By: sergey
This improve the cloth modeling workflow by allowing you to weld only the
edges that are used for the sewing forces.
Reviewed By: mano-wii, weasel
Differential Revision: https://developer.blender.org/D10710
**Drawing Changes:**
- F-curve drawing for Stretch, Multiply, Length and Frame Number.
- Value drawing when no keyframes for Stretch, Length and Frame Numbers.
General view of the new drawing for each speed effect mode:
{F9796642, size=full}
Detail of the horizontal zero (blue) line in the new `Multiply` mode:
{F9798520, size=full}
Nice to have (but I don't know how):
- Auto adjusting of endframe when using Multiply or Boost.
Differential Revision: https://developer.blender.org/D6110
Addresses T76003. When using VR with Eevee and viewport denoising,
scene geometry could sometimes be occluded for one eye. Solution is
to use a separate GPUViewport/GPUOffscreen for each VR view instead
of reusing a single one for rendering.
Reviewed By: Julian Eisel, Clément Foucault
Differential Revision: http://developer.blender.org/D11858
The core problem is that the geometry nodes modifier sometimes support
"mapping" (i.e. it remembers which new vertices correspond to edit mode
vertices) and sometimes it does not, depending on what the nodes are doing.
Also see rB07ce9910f7cc.
The solution here is that the fallback case in `BKE_mesh_foreach_mapped_edge`
does not call the callback with "invalid" indices.
Differential Revision: https://developer.blender.org/D12007
This might change the rotation of some instances after a Curve to Points.
Unfortunately, there is not much we can do about that, the math before
was just wrong. The forward and up axis stayed the same though.
Differential Revision: https://developer.blender.org/D12006
The problem was that the modifier was reevaluated all the time, even
between showing the attribute search and clicking on the attribute
name. This freed the data referenced by attribute search. The real bug
here was that the dependency graph was tagged for update even
though nothing changed. This was because the spreadsheet thought
its active context has changed and it wanted to compute the new
value to be shown in the spreadsheet.
The reason for the bug was that I confused how the tree-path of a
node editor works. The second element in the tree path contains
the name of the group node in the root tree that we're in (instead
of the first element).
Differential Revision: https://developer.blender.org/D12009
When the new "need_ids" flag is false and the output type is not
one of the valid BMesh kinds, there is no need to propagate even
a dummy id to all of the faces.
Share functionality for single and multi-threaded edge-split tagging.
Remove logic that ensured vert & loop indices in bm_mesh_edges_sharp_tag
(missing from fd9fc809b7).
Improves control over the XR reference space by using the stage ref
space (user-defined tracking bounds) instead of local ref space
(position at application launch), if available. Also adds an
"absolute tracking" session option to skip applying eye offsets that
are normally added for placing users exactly at landmarks.
By enabling absolute tracking, users can define the tracking origin
in a way that is not linked to the headset position. Instead, the
tracking values given by the XR runtime are left unadjusted and a
user can manually calibrate an "origin" landmark object to adjust to
their real world space.
Can be useful for applications that use external tracking systems
and those that primarily only need to use controllers and not the
headset (e.g. motion capture).
The absolute tracking option requires an update to the VR
Scene Inspection addon to be accessible by regular users.
Reviewed By: Julian Eisel
Differential Revision: http://developer.blender.org/D10946
This was added in 0b7f581397
but seems not to be needed as the assignment was never correct
since only one corner on either side of the smooth edge had the
vertex normal written to it.
Merge the sharp edge tagging into bm_mesh_loops_calc_normals,
this has the advantage that edge tagging can be performed as part of
walking over each vertices edges - instead of tagging in a separate loop.
Even though this will tag edges twice (once for each vertex),
the computation isn't heavy as it's only calculating a dot-product
between the two face users to compare the angle.
This change combined with 4ba06ad0a8
makes BM_loops_calc_normal_vcos around 5.68x faster,
with an overall speedup over 2.6x when transforming a high poly mesh.
(tested on a system with 32 cores).
Reviewed By: mont29
Ref D11970
Supported multi-threading for bm_mesh_loops_calc_normals.
This is done by operating on vertex-loops instead of face-loops.
Single threaded operation still loops over faces since iterating
over vertices adds some overhead in the case of custom-normals
as the order used for accessing loops must be the same as iterating
of a faces loops.
From isolated timing tests of bm_mesh_loops_calc_normals on high
poly models, this gives between 3.5x to 10x speedup,
with larger gains for meshes with custom-normals.
NOTE: this is part one of two patches for multi-threaded auto-smooth,
tagging edges as sharp is still single threaded.
Reviewed By: mont29
Ref D11928
Extract the slider gui implemented for the pose slide tools.
Generalise it so it can be used by other tools as well.
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D9314
Ref: D9314
With this commit, node warnings added to nodes during evaluation
(not "Info" warnings) will also draw in the modifier. In the future
there could be a "search for this node" button as well.
Differential Revision: https://developer.blender.org/D11983
Because these handles are calculated lazily, we need to make sure they
are calculated before switching to a manually positioned mode.
I doubt it would ever be necessary, but theoretically this could happen
on a per-point level, to avoid calculating handles not in the selection.
**Changes:**
- New enums correspond to 4 modes: `Stretch`, `Multiply`, `Frame Number` and `Length`.
- "`Multiply Factor`" has been removed;
- Value corresponding to "`use as speed`" enabled is now the value appended to the `Multiply` enum;
- Value corresponding to "`use as speed`" disabled is now the value appended to the `Frame Number` enum;
- Value corresponding to "`Scale to Length`" enabled is now the value appended to the `Length` enum;
- Except `Stretch` each mode has now its respective control values.
Differential Revision: https://developer.blender.org/D11856
It's the case of Image or Movie Clip node when not selecting any
source or an empty one.
Render methods expect an output buffer with size, only render
operations with resolution.
When exiting editmode, customdata [and thus attributes] are copied from
**BMesh** to **Mesh** (in `BM_mesh_bm_to_me`).
When adding attributes, these were always added via
`CustomData_add_layer_named` only.
Instead (if we are in mesh editmode), we need to go through
`BM_data_layer_add_named` to properly update the **BMesh** (see
`update_data_blocks`) so we have stuff available to copy back to
**Mesh** when exiting editmode.
Same is done for removing (also going through BMesh).
This is now done, DomainInfo is updated to point to BMesh (instead of
Mesh) customdata when in editmode.
Maniphest Tasks: T90026
Differential Revision: https://developer.blender.org/D11998
This node takes a curve and a point selection and allows you to set the
specified (or all) points left/right or both handles to a given type.
Differential Revision: https://developer.blender.org/D11992
* Allow specifying a folder and automatically setting the proper executable
name depending on the operating system
* Use executables from configs for listing devices instead of a blender
command being available
On Windows, using `bpy.data.orphans_purge` with some arguments (eg: `do_recursive=True`) does not produce the expected results. This is due to arguments not being parsed correctly on this platform with the current code.
The proposed fix is based on how other functions with boolean attributes are exposed to the Python API.
Reviewed By: #python_api, mont29
Maniphest Tasks: T89733
Differential Revision: https://developer.blender.org/D11963
This was reported in T90026 for attributes, but was also true for:
- UVMaps
- Vertex Colors
- Sculpt Vertex Colors
- Face Maps
For Vertex groups and Shapekeys this was already done (in that their
remove poll would check if there is a vertex group or shapekey to begin
with), now make this consistent across all mentioned types.
Thx @vvv for the initial patch (where this was done for attributes only)
ref T90026
Reviewed By: HooglyBoogly
Maniphest Tasks: T90026
Differential Revision: https://developer.blender.org/D11990
I'm trying to move away from general files with lots of things in them,
and instead have many small & focused files. I find that easier to
work with since everything has clear responsibilities, even if there is
some minor overhead in managing all these files.
I also try to differentiate more clearly between public and internal
files. So source files and internal headers are in a `intern/`
sub-directory, public functions are in a number of headers one level
higher.
For convenience and to make this compatible with our existing general
headers in `editors/include`, I made the `ED_asset.h` there include all
these public headers.
This is of course a bit of an experiment, let's see how it works in
practice.
Also corrected the name of `ED_asset_can_make_single_from_context()`.
The `ibo.tris` extraction in multithread is currently only done if the
mesh has only 1 material.
Now we cache a map indicating the index of each polygon after sort and
thus allow the extraction of tris with materials in multithreaded.
As caching is a heavy operation and was already being performed in
multi-thread for triangle offsets, no significant improvements are
expected.
The benefit will be much greater when we can skip updating the cache
while transforming a geometry.
**Profiling:**
||master:|PATCH:
|---|---|---|
|large_mesh_editing_materials:|Average: 13.855380 FPS|Average: 15.525684 FPS
||rdata 9ms iter 36ms (frame 71ms)|rdata 9ms iter 29ms (frame 64ms)
|subdiv_mesh_final_only_materials:|Average: 28.113742 FPS|Average: 28.633599 FPS
||rdata 0ms iter 1ms (frame 36ms)|rdata 0ms iter 1ms (frame 35ms)
1.1x overall speedup
Differential Revision: https://developer.blender.org/D11445
This was an open TODO, I wanted to have code for translating asset
library references from and to enum values in a central place, and
access that in the same way from both the Asset Browser and the
Workspace RNA code.
* Adds own file for the related functions.
* Adds doxygen comments.
* Updates RNA callbacks to properly use these functions.
* Let these functions call each other, avoid duplicating logic.
Since recently it's possible to access assets from outside the
File/Asset Browser, via the asset view template. So we are slowly
moving away from file space specific code to dedicated asset system
code. I introduced `AssetLibraryReference` as a duplicate of
`FileSelectAssetLibraryUID`, with a plan to delete the latter in a
separate cleanup commit. That's exactly what this commit is.
This will cause Asset Browsers to open with the default "Current File"
Asset Library. We could avoid that, but it's a minor issue really.
This new variable was introduced with 7898089de3. We don't usually use
an `active` prefix variable. Plus, this makes the name match the one of
the Asset Browser active library variable, so we can use the
`rna_def_asset_library_reference_common()` helper for both.
This will cause Asset Views to open with the default "Current File"
Asset Library. We could avoid that, but it's a minor issue really.
Currently the wording is a bit unclear: it doesn't specify //what// the particles will be converted into. This clarifies it by stating what the particles will be converted into: they will either be converted to a mesh or the instances will be made real.
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D11795
Fix an incoherence between the Eevee Materials menu and the Cycles Materials menu :
Eevee :
{F10230448}
Cycles :
{F10230449}
Simply Fixed by replacing the Cycles UI code by the Eevee UI code.
Thanks to @Brainzman for helping me create this diff and translate
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D11979
Just add a check for whether the mesh has faces when retrieving an
attribute on the corner domain. In the future there could be an info
message in the node in this case, since maybe it's not intuitive.
Would previously pass a few properties that are available via the
asset-handle now. This asset-handle is also required for some of the
asset API, e.g. the temporary ID loading. This will probably be needed
before too long.
For this to work, the utility function needs to be callable without
context, which is only needed for a File Browser specific hack anyway
(doesn't apply to this usage of it).
While the asset-handle design is supposed to be temporary (see
35affaa971), I prefer keeping the fact that it's nothing but a file
entry pointer an implementation detail that is abstracted away. So this
introduces getters for the file data we typically access for
asset-handles.
Note that the current asset-handle design is temporary, see
35affaa971. I still prefer this to be const, as code outside the
asset-list/file-list code should never mess with the file data of an
asset.
The asset handle design is only temporary (see 35affaa971) and this
RNA property is only needed for internal, technical reasons of the asset
view template. So although not nice, at least make it clear in the RNA
property description that this should not be used.
Using const indexes and offsets helps to make the logic less sequential,
which is hopefully easier to understand and possibly easier to parallelize
in the future. Also order return arguments last.
If there were lots of selected objects without an existing rigid body,
we would add rigid bodies to them one by one.
This would be slow in python, now we instead do this as a batch
operation in C.
On my (Intel) MacBook it used to take 60 seconds and with this change it
takes about 0.3 seconds.
Reviewed By: Sebastian Parborg
Differential Revision: http://developer.blender.org/D11957
Remove the assumption of the pose library that Action groups are named
after the bones in the armature. Even though this assumption is correct
when the keys are created by Blender, action groups can be renamed. Keys
created by Python scripts can also use arbitrary group names.
Since there is more code in Blender making this assumption, and looping
over selected bones is also a common occurrence, this commit contains
some generic functionality to aid in this:
- `BKE_armature_find_selected_bones`: function that iterates over all
bones in an armature and calls a callback for each selected one. It
returns a struct with info about the selection states (all or no bones
selected).
- `BKE_armature_find_selected_bone_names(armature)` uses the above
function to return a set of selected bone names.
- `BKE_pose_find_fcurves_with_bones()` calls a callback for each FCurve
in an Action that targets a bone, also passing it the bone name.
Convert `pose_backup.c` (in C) to `pose_backup.cc` (in C++). This will
make future improvements easier. For now, it's the same code with just
some additional explicit casts (C++ doesn't allow implicitly casting
`void *`), `NULL` changed into `nullptr`, and some other simple changes.
No functional changes.
When done from the Properties Editor, the context's modifier should be
used (this is where the button is located), when done from elsewhere,
the active modifier is still the way to go (since the context modifier is
not available then)
Maniphest Tasks: T89982
Differential Revision: https://developer.blender.org/D11972
The node tagged polys normals dirty, but the function to calculate the
normals didn't clear the dirty flags for polys. Now clear the poly and
corner dirty normal flags.
The test forgot to set the new need_ids field, which luckily
exposed a bug in the C api for delaunay when that field is false.
Fixed the bug and the test, and added a test for the need_ids false
case.
Wording on the UI, slider consistency and material mask switches layout.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: http://developer.blender.org/D11839
Also use `const Curve *` instead of `const Object *`, since the
function works at a lower level than objects anyway.
And also remove another unused function. Since this section of code
for converting curves to meshes will likely be replaced, it's nicer to
see which parts actually remain used at this point.
Function signatures for snap callbacks used `const` incorrectly
which was hidden by casting function types.
This made it seem as if the input arguments wouldn't be change and
wouldn't be initialized.
Name return arguments with an `r_` prefix, order them last,
remove function casts and correct `const` usage.
When fixing issues, seeing operation results can be helpful for
detecting which operation went wrong.
This commit adds an option for exporting all operations results to
image files.
Exceptions are:
- Output operations: They are already exported or can be seen in UI.
- Constant operations: There are too many and is rarely useful.
They are exported to "<temp session folder>/COM_operations/"
with filenames "<operation class name>_<operation id>.png".
Only works on full frame execution mode.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11722
Adds full frame implementation to this node operation.
No functional changes.
2.4x faster than tiled fallback.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11677
Adds full frame implementation to this node operations.
No functional changes.
2.3x faster than tiled fallback on average.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11686
Adds full frame implementation to this node operation.
No functional changes.
No performance changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11698
Adds full frame implementation to this node operation.
No functional changes.
No performances changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11750
Adds full frame implementation to this node operation.
No functional changes.
3x times faster than tiled fallback.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11635
Currently we mostly iterate buffer areas using x/y loops or through
utility methods extending from base classes.
To simplify code in simple operations this commit adds wrappers for
specifying buffer areas and their iterators for raw buffers with any
element stride:
- BufferRange: Specifies a range of contiguous buffer elements from a
given element index.
- BufferRangeIterator: Iterates elements in a BufferRange.
- BufferArea: Specifies a rectangle area of elements in a 2D buffer.
- BufferAreaIterator: Iterates elements in a BufferArea.
- BuffersIterator: Simultaneously iterates an area of elements in an
output buffer and any number of input buffers.
- BuffersIteratorBuilder: Helper for building BuffersIterator adding
buffers one by one.
For iterating areas coordinates it adds `XRange` and `YRange` methods
that return `IndexRange`.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11882
Although currently only the asset list code uses the asset library
reference wrapper, it can stand on its own and may be used in more
places in the future. So I prefer to give it its own source & header
file.
Also removed unused includes, added proper namespaces as per our C++
style guidelines, and removed an unnecessary TODO comment.
No operator or macro should be missing description. But if they do, then
they should use NULL pointer, and not an empty string.
This behavior was already enforced (through an assert) for operators,
previous commit made it the same for macros.
Code dealing with macro operators missing description field was slightly
different than the one from Operator registration.
This lead to invalid memory accesses in some python introspection cases
like the i18n messages extraction code in `bl_i18n_utils` module.
The code used `Spline::LookupResult` in a way that referred to evaluated
points and control points interchangeably. That didn't affect the logic,
but the code became harder to read. Instead, introduce a local struct
to contain the data in a more obvious way.
Some uses of delaunay_2d_calc don't need to know the original verts,
edges, and faces that correspond to output elements.
This change adds a "need_ids" value to the CDT input spec, default true,
which tracks the input ids only when true.
The python api mathutils.geometry.delaunay_2d_cdt gets an optional
final bool argument that is the value of need_ids. If the argument
is not supplied, it is true by default, so this won't break old uses
of the API.
On a sample text test, not tracking ids save about 30% of the runtime.
For most inputs the difference will not be so dramatic: it only really
kicks in if there are a lot of holes.
Regression introduced in {rBbfa3dc91b754}.
`ID_RECALC_GEOMETRY` should tag all operations of the `GEOMETRY`
component and not just the operation of node `GEOMETRY_EVAL_INIT`.
This node implements shortening each spline in the curve based on
either a length from the start of each spline, or a factor of the
total length of each spline, similar to the "Start & End Mapping"
panel of curve properties.
For Bezier curves, the first and last control points are adjusted
to maintain the shape of the curve, but NURB splines are currently
implicitly converted to poly splines.
The node is implemented to avoid copying where possible, so it outputs
a changed version of the input curve rather than a new one.
Differential Revision: https://developer.blender.org/D11901
After rB3b6ee8cee708 by @HooglyBoogly vertex groups were moved
to mesh data, and versioning code was provided to upgrade old
files. However, it fails to consider the case of linked duplicates
having different name lists, and dependent on the object order
can cause some of the names to be lost. This can even be all of
them, if there is a duplicate without any names, which can be
easily created by lazy Python code.
To fix this, change the code to use the longest available name list.
Differential Revision: https://developer.blender.org/D11958
Using part of a patch from Erik Abrahamsson, this replaces the
use of linked lists for original id tracking by Sets.
I had thought that the lists were unlikely to grow to more than
a few elements, but when the mesh has a lot of holes (whose
original ids go *outside* the hole, and therefore, most of the
mesh), this assumption can be very wrong.
On a Text regression test, the time went from 11.67s to 0.16s
with this fix. I also tested to make sure that Boolean didn't
slow down with this, and found it actually had a very slight speedup.
Using Sets exposed a dependency on the ordering of the items
in the id lists, luckily caught by a mesh intersect regression test,
so fixed that.
Scaling down images could create images with a width or height of zero.
Clamp at 1 to prevent a crash, also add an assert to scaling functions.
Ref D11956
`split_multicam` used split operator, where if more strips than
multicam were selected, all would be split, which is undesirable.
Add `Sequence.split()` RNA API function. to split individual strips.
Function accepts `frame` and `split_method arguments`. Returns right
strip after splitting.
In case when strip being split have effects, these will be split too, so
no invalid state should be created.
Selection is not handled, this is by design up to user.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11926
This will help enable development on optimizations to the perimeter
calculation here. Using C++ data structures like Array can make the
code easier to read as well.
Longer term, this can help improve integration with attributes
and possibly the new curve code (since strokes and curves are
quite similar in theory).
Differential Revision: https://developer.blender.org/D11941
We need to be more strict about trying to retrieve a list of vertex group
names from objects now, as only three object types support them.
This commit adds a check for vertex group support in a few places, the
data transfer operator/modifier, copying vertex groups to selected
objects, and the vertex group remove and clear functions.
Differential Revision: https://developer.blender.org/D11947
When a vertex group is used to limit the influence of the modifier
to a subset of vertices, binding data for vertices with zero weight
is not needed. This wastes memory, disk space and CPU cycles.
If the vertex group contents is known to be final and constant,
it is reasonable to optimize by only storing data group vertices.
This has to be an option in case the group can change.
Supporting this requires adding a vertex index field and spliting
the vertex count into mesh and bind variants, but both happen to
fit in available padding. The old numverts field is renamed to the
new bound vertex count field to maintain the array length invariant.
Versioning is used to initialize the other new fields.
If a file with sparse binding is opened in an old blender version,
it is corrupted into a non-sparse bind with vertex count mismatch,
preventing the modifier from working until rebind.
Differential Revision: https://developer.blender.org/D11924
`POINT_CACHE_RESET` pointed to `GEOMETRY_EVAL_INIT` while
`GEOMETRY_EVAL_INIT` pointed to `POINT_CACHE_RESET`.
Now `POINT_CACHE_RESET` points to the same nodes pointed to by
`GEOMETRY_EVAL_INIT` thus avoiding the dependency cycle.
The crash happens because `GPU_offscreen_create` is called with `err_out` `NULL`.
This patch proposes a solution within the `GPU_offscreen_create` itself
and raises an error report in the interface if a menu is called with
dimensions beyond what is supported.
Ref T89782
Maniphest Tasks: T89782
Differential Revision: https://developer.blender.org/D11927
The `action_preview_render()` function used to just render, but now it
also temporarily applies the pose. Its comment is now updated for this.
No functional changes.
Replaces current ID Mask node Anti-Aliasing operation by SMAA
operations with default settings as proposed by Jeroen Bakker.
SMAA produces smoother edges.
Reviewed By: manzanilla
Differential Revision: https://developer.blender.org/D11881
In driver editor, vertically flip the value debug lines to align
them with the timeline header values. This makes it easier to read
the values. Also set the line width explicitly, which was incorrect
in some cases.
Differential Revision: https://developer.blender.org/D8877
This move was already prepared with 788d380460 and 26b098c04f. The
template is quite big already, better to give it its own file. Plus it
could use some C++ features like RAII and maybe some more object
oriented code. I plan further refactoring there.
It turns out `BKE_mesh_copy_parameters` can be called while other
tools are running calculations, which meant that it was called at the
same time as `armature_deform_coords_impl`. Beause of that, we
shouldn't do any freeing (of the old vertex group names) there.
Since the materials are copied in the "for_eval" version anyway,
it seems to make sense to copy the vertex group name list there also.
Fixes T89877, and also the failing `deform_modifiers` test.
Differential Revision: https://developer.blender.org/D11936
The new Asset Browser-based pose library is partially implemented in an
add-on. This commit enables the add-on by default, as the old pose
library was built-in and thus always enabled.
The ability to disable the add-on is there mostly for cases where
people/studios want to use their own custom pose library.
Correct cases where the X-axis of the bone (in pose space) aligns with
the pose-space Y or Z-axis. In these cases the decomposition of the
matrix fails, and a negative scale of the X-axis turns into a 180°
rotation around the Y-axis. An extra -1 scale to the X and Z axes of the
resulting matrix seems to fix things.
The asset view UI template is a mini-version of the Asset Browser that
can be placed in regular layouts, regions or popups. At this point it's
made specifically for placement in vertical layouts, it can be made more
flexible in the future.
Generally the way this is implemented will likely change a lot still as
the asset system evolves.
The Pose Library add-on will use the asset view to display pose
libraries in the 3D View sidebar.
References:
* https://developer.blender.org/T86139
* https://code.blender.org/2021/06/asset-browser-project-update/#what-are-we-building
* https://code.blender.org/2021/05/pose-library-v2-0/#use-from-3d-viewport
Notes:
* Important limitation: Due to the early & WIP implementation of the
asset list, all asset views showing the same library will show the
same assets. That is despite the ID type filter option the template
provides. The first asset view created will determine what's visible.
Of course this should be made to work eventually.
* The template supports passing an activate and a drag operator name.
The former is called when an asset is clicked on (e.g. to apply the
asset) the latter when dragging (e.g. to .blend a pose asset). If no
drag operator is set, regular asset drag & drop will be executed.
* The template returns the properties for both operators (see example
below).
* The argument list for using the template is quite long, but we can't
avoid that currently. The UI list design requires that we pass a
number of RNA or custom properties to work with, that for the Pose
Libraries should be registered at the Pose Library add-on level, not
in core Blender.
* Idea is that Python scripts or add-ons that want to use the asset view
can register custom properties, to hold data like the list of assets,
and the active asset index. Maybe that will change in future and we
can manage these internally.
As an example, the pose library add-on uses it like this:
```
activate_op_props, drag_op_props = layout.template_asset_view(
"pose_assets",
workspace,
"active_asset_library",
wm,
"pose_assets",
workspace,
"active_pose_asset_index",
filter_id_types={"filter_action"},
activate_operator="poselib.apply_pose_asset",
drag_operator="poselib.blend_pose_asset",
)
drag_op_props.release_confirm = True
drag_op_props.flipped = wm.poselib_flipped
activate_op_props.flipped = wm.poselib_flipped
```
So far all UI lists had to be defined in Python, this makes it possible
to define them in C as well. Note that there is a whole bunch of special
handling for the Python API that isn't there for C. I think most
importantly custom properties support, which currently can't be added
for C defined UI lists.
The upcoming asset view UI template will use this, which needs to be
defined in C.
Adds a new file `interface_template_list.cc`, which at this point is
mostly a dummy to have a place for the `ED_uilisttypes_ui()` definition.
I plan a separate cleanup to move the UI-list template to that file.
This button type shows a preview image above centered text, similar to
the File Browser files in Thumbnail Display Mode or the default Asset
Browser display. In fact we may want to port these over to use the new
button type at some point.
Will be used by the asset view UI template that will be added in a
following commit. That is basically a mini version of the Asset Browser
that can be displayed elsewhere in the UI.
If a text button is activated that is not in view (i.e. scrolled away),
the scrolling will now be adjusted to have it in view (with some
small additional margin). While entering text, the view may also be
updated should the button move out of view, for whatever reason. For the
most part, this feature shouldn't be needed and won't kick in, except
when a clicked on text button is partially out of view or very close to
the region edge. It's however quite important for the previously
committed feature, that is, pressing Ctrl+F to start searching in a UI
list. The end of the list where the scroll button appears may not be in
view. Plus while filtering the number of visible items changes so the
scrolling has to be updated to keep the search button visible.
Note that I disabled the auto-scrolling for when the text button spawned
an additional popup, like for search-box buttons. That is because
current code assumes the button to have a fixed position while the popup
is open. There is no code to update the popup position together with the
button/scrolling.
I also think that the logic added here could be used in more places,
e.g. for the "ensure file in view" logic the File Browser does.
Adds an operator invoked by default with Ctrl+F that while hovering a UI
list, opens the search field of the list and enables text input for it.
With this commit the search button may actually be out of view after
Ctrl+F still. The following commit adds auto-scroll to solve that.
A downside is that in the Properties, there also is Ctrl+F to start
the editor-wide search. That's not unusual in Blender though (e.g.
scolling with the mouse over a UI list also scrolls the list, not the
region).
Makes it possible to create tooltips for UI list rows, which can be
filled in .py scripts, similar to how they can extend other menus. This
is used by the (to be committed) Pose Library add-on to display pose
operations (selecting bones of a pose, blending a pose, etc).
It's important that the Python scripts check if the UI list is the
correct one by checking the list ID.
For this to work, a new `bpy.context.ui_list` can be checked. For
example, the Pose Library add-on does the following check:
```
def is_pose_asset_view() -> bool:
# Important: Must check context first, or the menu is added for every kind of list.
list = getattr(context, "ui_list", None)
if not list or list.bl_idname != "UI_UL_asset_view" or list.list_id != "pose_assets":
return False
if not context.asset_handle:
return False
return True
```
Add improved arrow key walk navigation in grid layout UI List templates.
Pressing up or down walks the active item to the adjacent row in that
direction, while left and right walk through the items along the columns
wrapping at the rows.
Note from Julian:
In combination with the following commit, this has the important
limitation that the list's custom activate operator won't be called when
"walking over" an item that is scrolled out of the list. That is because
we don't actually create any buttons for those that could be used for
the handling logic. For our purposes of the pose libraries that should
be fine since the asset view list is always made big enough to display
all items. Solving this might be difficult, we don't properly support
nesting boxes with proper scrolling in regular layouts. It's all just
hacked a bit for UI-lists to work. Overlaps quite a bit with T86149.
Differential Revision: https://developer.blender.org/D11063
For pose libraries, we need to be able to apply a pose whenever
activating (clicking) an item in the Pose Library asset view and blend
it by dragging (press & move). And since we want to allow Python scripts
to define what happens at least when activating an asset (so they can
define for example a custom "Apply" operator for preset assets), it
makes sense to just let them pass an operator name to the asset view
template. The template will be introduced in a following commit.
This new layout type is meant for the upcoming asset view UI template.
With it it is possible to show big asset previews with their names in a
responsive grid layout.
Notes:
* The layout is only available for C defined UI lists. We could expose
it to Python, but I think there are still some scrolling issues to be
fixed first. (The asset view template doesn't use scrolling for the UI
list.)
* I'd consider this a more usable version of the existing `GRID` layout
type. We may remove that in favor of the new one in future.
This is more of a first-pass refactor for the UI list template. More
improvements could be done, but that's better done separately. Main
purpose of this is to make the UI list code more manageable and ready
for the asset view template.
No functional changes for users.
* Split the huge template function into more manageable functions, with
clear names and a few structs with high coherency.
* Move runtime data management to the template code, with a free
callback called from BKE. This is UI data and should be managed at
that level.
* Replace boolean arguments with bit-flags (easily extendable and more
readable from the caller).
* Allow passing custom-data to the UI list for callbacks to access.
* Make list grip button for resizing optional.
* Put logic for generating the internal UI list identifier (stored in
.blends) into function. This is a quite important bit and a later
commit adds a related function. Good to have a clear API for this.
* Improve naming, comments, etc.
As part of further cleanups I'd like to move this to an own file.
When generating a preview image for a pose, temporarily apply it to the
armature. Contrary to the usual pose application, this ignores the
selected bones and always applies the entire pose.
Introduce new pose library, based on the Asset Browser. Contrary to the
old pose library (in `editors/armature/pose_lib.c`), which stored an
entire library of poses in an `Action`, in the new library each pose is
its own `Action` datablock. This is done for compatibility with the
asset browser, and also to make it easier to attach preview images,
share datablocks, etc. Furthermore, it opens the door to having
animation snippets in the pose library as well.
This commit contains the C code for the pose library; in order to fully
use it, an addon is required as well (which will be committed shortly).
Add function `BKE_pose_apply_action_blend()`, which blends a given
Action into current pose. The Action is evaluated at a specified frame,
and the result is applied to the armature's pose.
A blend factor can be given to blend between the current pose and the
one in the Action. Quaternions are interpolated with SLERP; it is
assumed that their FCurves are consecutively stored in the Action.
This function will be used in the upcoming new Pose Library.
New function `BKE_pose_apply_action_all_bones()`, which will be
necessary for the upcoming pose library v2.0.
This renames the function `BKE_pose_apply_action` to
`BKE_pose_apply_action_selected_bones`, to reflect that it only works on
selected bones, to contrast it to the new function.
Add operator 'Open Blend File' to the Asset Browser. This operator:
- starts a new Blender process,
- opens the blend file containing the asset,
- monitors the new Blender process, and when it stops,
- reloads the assets to show any changes made.
This is an editor-level abstraction for the `BLO_library_temp_xxx()`
API for temporary loading of data-blocks from another Blend file. It
abstracts away the asset specific code, like asset file-path handling
and local asset data-block handling.
Main use-case for this is applying assets as presets that are based on
data-blocks, like poses. Such preset assets are an important part of the
asset system design, so such an abstraction will likely find more usage
in the future.
Adds the following to `bpy.types.FileSelectEntry`:
* `id_type`: The data-block type the file represenets, if any.
* `local_id`: The local data-block it represents, if any (assets only).
And the following to `bpy.types.AssetHandle`:
* `local_id`: The local data-block the asset represents, if any.
This kind of information and the references are important for asset related
operators and UIs. They will be used by upcoming Pose Library features.
Implements a basic, WIP version of the asset list. This is needed to
give the asset view UI template asset reading and displaying
functionality.
See:
* Asset System: Data Storage, Reading & UI Access - https://developer.blender.org/T88184
Especially the asset list internals should change. It uses the
File/Asset Browser's `FileList` API, which isn't really meant for access
from outside the File Browser. But as explained in T88184, it does a lot
of the stuff we currently need, so we (Sybren Stüvel and I) decided to
go this route for now. Work on a file-list rewrite which integrates well
with the asset system started in the `asset-system-filelist` branch.
Further includes:
* Operator to reload the asset list.
* New `bpy.types.AssetHandle.get_full_library_path()` function, which
gets the full path of the asset via the asset-list.
* Changes to preview loading to prevent the preview loading job to run
eternally for asset views. File Browsers have this issue too, but
should be fixed separately.
It's useful to know where an asset is stored in, before this there was no way
to tell this. This could probably be displayed nicer in the UI but we're
currently unsure how. But at least the information is there now.
With temporary I mean that this is not intended to be part of the
eventual asset system design. For that we are planning to have an
`AssetRepresentation` instead, see T87235. Once the `AssetList` is
implemented (see T88184), that would be the owner of the asset
representations.
However for the upcoming asset system, asset browser, asset view and
pose library commits we need some kind of asset handle to pass around.
That is what this commit introduces.
Idea is a handle to wrap the `FileDirEntry` representing the asset, and
an API to access its data (currently very small, will be extended in
further commits). So the fact that an asset is currently a file
internally is abstracted away. However: We have to expose it as file in
the Python API, because we can't return the asset-handle directly there,
for reasons explained in the code. So the active asset file is exposed
as `bpy.context.asset_file_handle`.
For the Asset Browser, this returns the active asset library of the
Asset Browser, otherwise it returns the one active in the workspace.
This gives simple access to the active asset library from UI code and
Python scripts. For example the upcoming Pose Library add-on uses this,
as well as the upcoming asset view template.
This per-workspace active asset library will be used by the asset views
later. Note that Asset Browsers have their own active asset library,
overriding the one from the workspace.
As part of this the `FileSelectAssetLibraryUID` type gets replaced by
`AssetLibraryReference` which is on the asset level now, not the
File/Asset Browser level. But some more work is needed to complete that,
which is better done in a separate commit.
This also moves the asset library from/to enum-value logic from RNA to
the editor asset level, which will later be used by the asset view.
Update vertex weights between simulation steps if they have changed.
This allows for animated vertex weights in the cloth sim.
Reviewed By: Sebastian Parborg
Differential Revision: http://developer.blender.org/D11640
The `__enter__` function of the `bpy.data.libraries.load` context manager
was storing a pointer to a stack-allocated variable, which was subsequently
used in the `__exit__` function, causing a crash. This is now fixed.
Thanks @Severin for the patch.
If text strips have the same start frame but are stacked on top of each
other in different channels the order in which they are written in the
.rst file was random before.
Reviewed By: Richard Antalik
Differential Revision: https://developer.blender.org/D11903
Mainly naming (also droping the `layer_collection` in favor of just
`layer` for internal code, this is clear enough and much shorter). Add
proper parent/child identifiers, `r_` prefix for parameters also used as
return values, etc.
Also made some parameters const.
The original refactor for vertex groups (3b6ee8cee7)
forgot to bump the minimum file requirement.
I'm also bumping the subversion to 12 so everyone can switch to a
working subversion number.
Differential Revision: https://developer.blender.org/D11931
This makes node trees with long links that cross other nodes easier to work with.
Dimmed links will be ignored by various modal operators like cut and reroute insertion.
Differential Revision: https://developer.blender.org/D11813
We were manually setting the compiler flags
for C++17 support for this previously. CMake
can do this for us in a uniform way without
having to worry about compiler specifics.
Setting these flags manually somehow brought
out some unwanted behaviour (CMake switching
back to C++14) in the nightly CMake builds.
Unsure if that's a CMake bug or planned
new behaviour for future version, but best
to play it safe.
These flags are supported since CMake 3.1
so should not break anything.
Reviewed by: Campbell Barton
Differential Revision: https://developer.blender.org/D11891
This logic is from the curve sundivide node, used to add points with
proper handles in between two existing points. However, the same logic
is used for trimming of Bezier splines, and possibly interactive point
insertion in the future, so it's helpful as a general utility.
The logic is converted to depend on a bezier spline instead of being
static. A temporary segment spline can be used for the latter use case.
This adds id_properties_clear() and id_properties_ensure() functions
to RNA structs. This is meant as an initial change based on discussion
in review of D9697. However, they may be useful in other situations.
The change requires refactoring the internal idproperties callback to
return a pointer to the IDProperty pointer, which actually turns out
to be quite a nice cleanup.
An id_properties attribute could be added in the future potentially.
Differential Revision: https://developer.blender.org/D11908
The general graphing mechanism will create one graph for each output
variable. So it's not limited to time and memory, but that is what the
Cycles tests now output.
The BKE_gpencil_stroke_add_points API function worked well for
creating the primitives in the add object menu, but it expected a
specific data format that doesn't make sense in a dynamic context.
As evidence of that we can see the way source data was duplicated
in the line art file just to use this API function.
This commit solves that problem in two ways:
- Clean up the line art function (this should make it faster too).
- Move/rename the function so its intended use is more clear.
Differential Revision: https://developer.blender.org/D11909
Non-pointer-like properties that are not editable should never generate
override operations.
While harmless (those would never be applied back anyway), better not
clutter override operations list, and also enjoy the symbolic
performances improvement here.
NOTE: Pointer-like properties (pointers and collections) remain
processed as usual here since they usually imply recursivity. We could
make an exception to the exception for ID pointers, but for now I don't
think this is worth it.
Issue would happen when the original, linked data already had 'Disk Cache'
setting enabled. Override would then see no difference with linked data,
and not create any rule for it (as expected).
Root of the issue was that in Cloth modifier copy code, those disk cache
settings were not copied at all, so every time local overrides were
re-generated by copying linked data, those flags would be reset to their
default values.
NOTE: this might exist in other PointCache usages as well, but this code is
in such a bad state that I'd rather do minimal strictly needed changes
there, on a case-by-case basis. Proper recode of that whole system is
wayyyyy out of scope here.
When image strip is added from python using `image_strip_add` operator
and directory path is not terminated with slash, last part of directory
was ignored.
Use `BLI_join_dirfile` instead of simple string concatenation.
Constraining to X axis caused snapping to not work at all. Constraining
to Y axis caused snapping indicator to be drawn, when snapping doesn't
occur.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11898
nodes or sockets" error
rBfe22635bf664 introduced a utility to check for this (but it was always
returning true).
This wasnt a problem in master (since it is unused there), but in the
2.93 branch, this utility is actually used and the error results in all
geometry nodetrees to appear with the "Node group has unidentified nodes
or sockets" message (and being unusable).
Now return false in has_undefined_nodes_or_sockets if all nodes and
sockets have been successfully checked.
This commit then needs to end up in the 2.93 branch.
Maniphest Tasks: T89851
Differential Revision: https://developer.blender.org/D11911
Socket inspection helps with debugging a geometry node group.
Now, when hovering over a socket, a tooltip will appear that provides
information about the data in the socket. Note, socket inspection only
works for sockets that have been computed already. Nodes that are not
connected to an output are not computed.
Future improvements can include ui changes to make the tooltip look
more like in the original design (T85251). Furthermore, additional
information could be shown if necessary.
Differential Revision: https://developer.blender.org/D11842
Use more direct access to next/previous vertices.
- `BM_edge_other_vert(l_curr->e, l_curr->v)` -> `l_curr->next->v`.
- `BM_edge_other_vert(l_curr->prev->e, l_curr->v)` -> `l_curr->prev->v`.
Add asserts to keep the intention clear.
Adds full frame implementation to this node operations.
No functional changes.
2.5x faster than tiled fallback on average.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11690
Not causing issues in current master because all buffer areas are at
(0, 0) position and `Extend` is not used. But areas may be at any
position in future developments and it will crash.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11784
Link sockets are always connected to inserted translate or scale
operation `Color` sockets even when they have different data type.
This causes crashes on full frame mode when operations read inputs
with non expected datatypes.
Because data type conversions need to be executed before, convert
resolutions must ensure same datatypes are linked.
This commit moves the storage of `bDeformGroup` and the active index
to `Mesh`, `Lattice`, and `bGPdata` instead of `Object`. Utility
functions are added to allow easy access to the vertex groups given
an object or an ID.
As explained in T88951, the list of vertex group names is currently
stored separately per object, even though vertex group data is stored
on the geometry. This tends to complicate code and cause bugs,
especially as geometry is created procedurally and tied less closely
to an object.
The "Copy Vertex Groups to Linked" operator is removed, since they
are stored on the geometry anyway.
This patch leaves the object-level python API for vertex groups in
place. Creating a geometry-level RNA API can be a separate step;
the changes in this commit are invasive enough as it is.
Note that opening a file saved in 3.0 in an earlier version means
the vertex groups will not be available.
Differential Revision: https://developer.blender.org/D11689
When adding texts or various simple effects I often copy-paste strips
to reuse properties from a template such as font or position. I assume
this is common workflow. Issue with this workflow is, that active strip
is not changed after pasting, so when adjusting property, it is original
strip that is being modified.
This is not issue when duplicating strips - selection state is
transfered to duplicate strips, such that duplicate of active strip is
set to be active and duplicate of selected strip is set to selected.
Implement same selection transfering behavior in paste operator, that
exists in duplicate operator.
Since strip can be deleted after copying, it is not possible to rely
on sequencer state. This is true even when pasting strips to different
scene. Therefore active strip name must be stored in clipboard.
Reviewed By: sergey, Severin
Differential Revision: https://developer.blender.org/D11781
Caused by fba9cd019f, then fixed by 0e4245bc28, but without
subversion bump, so some files were still broken after fix.
Repeat fix again, but this time also bump subversion.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D11864
Use the same partial-update functions used by transform when
editing vertex locations with the number buttons.
This avoids unnecessary calculations for normals and tessellation.
This gives around 1.44x overall speedup on high poly meshes.
Support for begin/update/end callbacks allowing state to be cached
and reused while dragging a number button or slider.
This is done using `UI_block_interaction_set` to set callbacks.
- Dragging multiple buttons at once is supported,
passing multiple unique events into the update function.
- Update is only called once even when multiple buttons are edited.
- The update callback can detect the difference between click & drag
actions so situations to support skipping cache creation and
freeing for situations where it's not beneficial.
Reviewed by: Severin, HooglyBoogly
Ref D11861
In most cases the undo system was loading undo steps twice.
This was needed since some undo systems (sculpt, paint, text)
require stepping out of the current undo step.
Use a flag to limit this to the undo systems that need it.
This improves performance for other undo systems.
This gives around 1.96x speedup in edit-mesh for high-poly objects.
Reviewed by: mont29
Ref D11893
- Tag the object data instead of the object when decoding
(this avoids duplicating mesh object-data on each undo-step).
- Calculate face normals as part of multi-threaded tessellation.
This gives ~11% speedup with 1.5x million polygons.
Rename:
- EDBM_mesh_free -> EDBM_mesh_free_data
BKE_editmesh_free -> BKE_editmesh_free_data
Since this doesn't free the edit-mesh pointer.
- BKE_editmesh_free_derivedmesh -> BKE_editmesh_free_derived_caches
Since this no longer uses derived-mesh, match naming for the related
object function BKE_object_free_derived_caches.
Also remove `do_tessellate` argument from BKE_editmesh_create,
since the caller can explicitly do this if it's needed,
with the advantage that it can be combined with normal calculation
which is faster on high-poly meshes.
All platforms support the proper format string and it's already used in
various other places.
Differential Revision: https://developer.blender.org/D11460
During a mesh transformation in edit mode (Move, Rotate...), only part of
the batch cache needs to be updated.
This commit allows only update only the drawn batches seen in
`BKE_object_data_eval_batch_cache_deform_tag` if the new
`ID_RECALC_GEOMETRY_DEFORM` flag is used.
This new flag is used in the transforms operation for edit-mesh and
results in 1.6x overall speedup in heavy subdiv cube.
Differential Revision: https://developer.blender.org/D11599
This might be an artistic choice, but round end caps are supposed to be
a "half circle centered at the end point of the line" as documented
here: https://docs.blender.org/manual/en/dev/render/freestyle/
parameter_editor/line_style/strokes.html#caps
They are a shashed half circle instead.
This patch makes this pure half circles [and also fixes the case where
thickness of beginning was used for both beginning and end of the
stroke]
Maniphest Tasks: T88015
Differential Revision: https://developer.blender.org/D11340
This commit adds a curve primitive node for creating squares,
rectangles, trapezoids, kites, and parallelograms. It also includes
a mode where the four points are just vector inputs.
Differential Revision: https://developer.blender.org/D11665
In this bug report it resulted in rendering animations stopping too early,
but this affected more areas.
After the previous cleanup commit, it becomes clear that frame and ctime
values were mixed up.
Confusingly, BKE_scene_frame_get did not match the frame number as expected by
BKE_scene_frame_set. Instead it return the value after time remapping, which
is commonly named "ctime".
* Rename BKE_scene_frame_get to BKE_scene_ctime_get
* Add a new BKE_scene_frame_get that matches BKE_scene_frame_set
* Use int/float depending if fractional frame is expected
It always bothered me that we'd do the `BLI_assert(... || !"message")` trick to
print a message alongside the assert, while it should be trivial to have a way
to pass an extra string as additional argument.
This adds `BLI_assert_msg()` with a second argument for a message. E.g.:
```
BLI_assert_msg(
params->rename_id == NULL,
"File rename handling should immediately clear rename_id when done, because otherwise it will keep taking precedence over renamefile.");
```
On failure this will print like this:
```
0 Blender 0x00000001140647a3 BLI_system_backtrace + 291
[...]
13 Blender 0x00000001092647a6 main + 3814
14 libdyld.dylib 0x00007fff203d8f5d start + 1
BLI_assert failed: source/blender/editors/space_file/file_ops.c:2352, file_directory_new_exec(), at 'params->rename_id == ((void*)0)'
File rename handling should immediately clear rename_id when done, because otherwise it will keep taking precedence over renamefile.
```
Reviewed by: Sybren Stüvel, Jacques Lucke, Sergey Sharybin, Campbell Barton
Differential Revision: https://developer.blender.org/D11827
The 'collection' property is flagged PROP_ID_REFCOUNT, so the
modifiers foreachIDLink functions should walk with IDWALK_CB_USER
(instead of IDWALK_CB_NOP).
Otherwise the modifier wont be included as a user for the collection
(e.g. on file read); removing the collection from the modifier will
decrement usercount though (which in worst case scenario makes the
collection orphan and will result in data loss)
Maniphest Tasks: T89765
Differential Revision: https://developer.blender.org/D11877
When editing vertices with number buttons, tag the mesh, not the object.
This prevents the evaluated mesh being re-created for the object
and is correct as the mesh is being edited not the object.
Note that all tags for updating object geometry should be checked
to see if this change should be applied there too.
From a simple test on a high-poly mesh this gives around 1.3x
overall speedup.
After cache implementation line art apply will not show strokes properly, now fixed.
# Conflicts:
# source/blender/gpencil_modifiers/intern/MOD_gpencillineart.c
The Pattern and Search display options in the Clip Editor display settings
are independent and should not be grayed out since those options
remain relevant even with path display turned off.
Alternative solution were propoesed in D11630 and D11715
but each of those patches had downsides.
This solution is the simplest and does not break muscle memory.
Channel packed images should not have their RGB affected by alpha.
rendering in Cycles and Eevee was fine already, but displaying these was
not right in the Image and Node editors.
Not 100% sure what to do for the "Color and Alpha" mode, but I guess
this should stay like it was before (applying the alpha).
"Color", "R", "G", and "B" modes were changed to not have color be
affected by alpha though.
ref. T89034
Maniphest Tasks: T89034
Differential Revision: https://developer.blender.org/D11871
Fly navigation has always had this option. They is particularly useful
when users use "Trackball" as their orbit method.
For walk navigation this works as a one off option. Not as a toggle like
for fly navigation.
Differential Revision: https://developer.blender.org/D11863
Correctly reset `prev` and `next` pointers of action group FCurves when
separating them into distinct `ListBase`s per `bActionGroup`.
These `NULL` pointers are necessary to temporarily demarcate the start &
end of the `bActionGroup::channels` list. Having them still point to
other FCurves caused ordering issues when moving curves towards the
start/end of a group.
This commit corrects the above issue and adds versioning code to rectify
any ordering issues that may have been caused. For this purpose the
`BKE_action_groups_reconstruct()` function is rewritten to avoid relying
on the `bAction::curves` list order or `prev` link integrity.
Differential Revision: https://developer.blender.org/D11811
Simple upgrade of OpenXR to 1.0.17. A version bump was enough, no
Blender code had to change.
Reviewed By: LazyDodo, mont29
Differential Revision: https://developer.blender.org/D11848
It was possible that render buffers and scene kernel data will be out
of sync because reset and scene update happens in different locks.
This is similar issue we've fixed in the Cycles X branch, so backported
relevant changes from there.
This change removes what seems to be unused feature kernel.
Differential Revision: https://developer.blender.org/D11828
This change makes the behavior consistent between shortcut and
option from space clip's header.
The only caveat is that the "Lock to Selection" is removed from the
Display popover. This is because it is rather hard to make operator
to render same as regular checkbox. However, shouldn't be a problem
because the setting in popover was redundant.
Differential Revision: https://developer.blender.org/D10423
The node group interface panels were still implemented in C.
Now they ported over to python for easier maintenance.
Differential Revision: https://developer.blender.org/D11834
In addition to _object_ animation, now _object data_ (mesh, curve, ...)
animation can now be made single user as well.
This came up in T89369 and while it is possible to do this via the
Outliner [where all actions have to be selected individually], this
seems to be more convenient to be done from the 3DView.
note: usercount of the action is checked now, if it single-user already,
no copy takes place (same thing could/should be done for
single_object_action_users as well).
note2: obdata is made single user as well (otherwise duplicated actions
will be assigned to the same shared obdata - which does not result in
unique animadata which is what we are after here)
ref. T89369
Maniphest Tasks: T89369
Differential Revision: https://developer.blender.org/D11683
Previously, this did not compile in VS 2017, because
`new T(initializer_())` would try to call the copy constructor of `T`.
Now, `initializer_` will construct the `T` inplace.
Renaming compositor node in search panel "View Switch" to "Switch View"
for better consistency.
Reviewed By: dfelinto
Differential Revision: https://developer.blender.org/D11717
Using the "Camera Fit Frame to Selected" operator didn't work for Grease Pencil
objects. The same issue caused grease pencil preview thumbnails to be useless
(e.g. when using "Mark Asset" on a Grease Pencil object).
Reason was that there was no logic to handle grease pencil data and its strokes
for the object display-point iterators used for the "Frame Selected" logic.
Addresses T89656.
Reviewed by: Antonio Vazquez, Campbell Barton
Differential Revision: https://developer.blender.org/D11833
The original assumption that the `modifyMesh` function is only
called when the modifier is applied was wrong. There are still a
couple of other places calling it through `BKE_modifier_modify_mesh`.
Now there is an extra check that makes sure instances are only
realized when the modifier is actually applied.
The backdrop image gizmo was not following the backdrop image, it
needs to be refreshed whenever the view changes. The region init
callback is executed whenever the region size changes, so that should be
a reliable place to do that.
Reported as part of T87591.
In a collapsed hierarchy, some type of data are listed as one icon per
item (2.79 did this for all data),
others are 'compacted' as a single icon with a counter (also indicating
if the active item is down that collapsed hierarchy) from 2.80 on.
Not quite sure if {rB92dfc8f2673e} was meant to do this (if it was, this
was not working though because relevant code would only get executed for
object hierarchies it seems), so now this is done for bones as well.
Fixes T88413.
Maniphest Tasks: T88413
Differential Revision: https://developer.blender.org/D11404
Walk rotate speed for tablets was being modified at runtime by scaling
the user preference mouse_speed by a constant factor; this consolidates
scaling into the the compile time tablet scale factor in walkApply.
No change in behavior.
When renaming an ID somewhere in the UI after marking it as asset, it would
often get lost in the Asset Browser (scrolled out of view). It would also get
deactivated.
This patch makes sure that if an asset is active whose ID gets renamed, it is
kept active and visible. That is important for a fast, uninterrupted asset
creation workflow, where users often rename assets while working in the asset
browser.
Old code stored the new file-name to identify a file after re-reading the
file-list after the rename. For assets that doesn't work because there may be
multiple assets with the same name. Here the simple solution of just storing
the pointer to the renamed ID is chosen, rather than relying on the file-name
in this case. (Should be fine with undo, since the ID * reference is short
lived, it's not stored over possible undo steps. If it turns out to have
issues, I rather switch to a rename_id_uuid, but keep that separate from the
file->uid).
Reviewed by: Sybren Stüvel
Differential Revision: https://developer.blender.org/D11119
TBB includes in windows.h which will by
default define min/max macro's by default,
which collide with stl's min/mac functions.
this change instructs windows.h not to
add the offending macros
(Note: This is an alternative version for D9994 by @Schiette. The commit
message is based on his description.)
Currently, when a new directory is created it is not selected.
Similarly, when renaming an existing file or directory, it does not
remain active/highlighted blue after renaming.
This change makes sure the file or directory is always selected after
renaming, even if the renaming failed or was cancelled.
This has some usability advantages:
- Open the newly created directory without having to select it (ENTER).
- If you make a naming mistake, you can immediately fix that (F2)
without having to click it again.
- If you create a directory and forget to name it, you can fix that
(F2) without having to select it.
- This is consistent with many common File Browsers.
Further, selecting the item even after renaming failed or was cancelled
helps keeping the file in focus, so the user doesn't have to look for it
(especially if the renaming just failed which the user may not notice).
In other words, it avoids disorienting the user.
Also see D11119 which requires this behavior.
We could also always select the file/directory on mouse press. This
would make some hacks unnecessary, but may have further implications. I
think eventually that's what we should do though.
`filesel.c` seems like the place that should contain file selection
functions. Previously it was in `file_ops.c` because that was the only
file that actually used it. But a followup commit needs it from a
different file.
Many ui features for geometry nodes need access to information generated
during evaluation:
* Node warnings.
* Attribute search.
* Viewer node.
* Socket inspection (not in master yet).
The way we logged the required information before had some disadvantages:
* Viewer node used a completely separate system from node warnings and
attribute search.
* Most of the context of logged information is lost when e.g. the same node
group is used multiple times.
* A global lock was needed every time something is logged.
This new implementation solves these problems:
* All four mentioned ui features use the same underlying logging system.
* All context information for logged values is kept intact.
* Every thread has its own local logger. The logged informatiton is combined
in the end.
Differential Revision: https://developer.blender.org/D11785
The geometry nodes modifier uses id properties for the inputs to node groups.
That is because the set of properties changes depending on which geometry
node group is selected.
The animation was not updated correctly because the `ANIMATION_EVAL`
depsgraph node was not evaluated, because nothing depended on it in the
depsgraph. This patch makes sure that the proper link to the geometry
component is inserted.
Differential Revision: https://developer.blender.org/D11831
This issue happened because of some miscommunication during the original
patch review. Since we have the parent element in other outliner modes
(Blender File, Data API) I was on the fence here. Rolling this back now
so that when Show All View Layers is off we don't see the current View
Layer top element.
The fix is simple, but it was better to format the code around to
follow the style in this file.
Differential Revision: https://developer.blender.org/D11830
Rename the mesh circle to "Mesh Circle", mesh line to "Mesh Line",
and mesh subdivide to "Mesh Subdivide". Previously they looked exactly
the same in the search menu, and the nodes themselves had the same
label. This is a "deep" rename that also renames internal defines and
function names to match the UI.
This node is quite similar to the curve to points node, but creates
points for only the start and end of each spline. This is a separate
node because the sampling from the curve to points node don't apply,
and just for ease of use.
All attributes from the curves are copied, including the data for
instancing: tangents, normals, and the derived rotations. One simple
use case is to make round caps on curves by instancinghalves of a
sphere on each end of the splines.
Differential Revision: https://developer.blender.org/D11719
DNA parsing assumed any identifier which starts with
(`struct`, `unsigned`, `const`) was that identifier.
So a struct called `constTest foo;` would be parsed as `est foo;`.
Add utility function to check identifiers are not
part of a larger identifier.
This also supports skipping these identifiers in any order.
Reviewed By: LazyDodo
Ref D11837
The curve resample node neglected to copy attributes to single point
result splines. That could have caused errors if some of the splines
in the result had only one point but others had more.
Use "Snap Playhead to Strips" option to enable playhead snapping.
Change behavior of CTRL key to invert snapping similar to transform operator.
Currently this option is disabled by default. It makes editing quite unpleasant
for me personally, but ideally I should gather feedback from more users.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D11745
This field was used to reference "parent" meta strips in `sequences_all`
RNA collection iterator functions.
Use `SeqIterator` wrapped in `BLI_Iterator` to iterate over elements.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11793
Work scheduler needed initialization and execution models are
not created during constant folding. This moves work execution
method to execution system.
This patch horizontally centers the text inside the progress bar
widget. It is currently left-aligned and offset to the middle, which
doesn't center properly.
see D11205 for details and examples.
Differential Revision: https://developer.blender.org/D11205
Reviewed by Julian Eisel
The menu lists all socket types that are valid for the node tree.
Changing a socket type updates all instances of the group and keeps
existing links to the socket.
If changing the socket type leads to incorrect node connections the
links are flagged as invalid (red) and ignored but not removed. This is
so users don't lose information and can then fix resulting issues.
For example: Changing a Color socket to a Shader socket can cause an
invalid Shader-to-Color connection.
Implementation details:
The new `NODE_OT_tree_socket_change_type` operator uses the generic
`rna_node_socket_type_itemf` function to list all eligible socket types.
It uses the tree type's `valid_socket_type` callback to test for valid
types. In addition it also checks the subtype, because multiple RNA
types are registered for the same base type. The `valid_socket_type`
callback has been modified slightly to accept full socket types instead
of just the base type enum, so that custom (python) socket types can be
used by this operator.
The `nodeModifySocketType` function is now called when group nodes
encounter a socket type mismatch, instead of replacing the socket
entirely. This ensures that links are kept to/from group nodes as well
as group input/output nodes. The `nodeModifySocketType` function now
also takes a full `bNodeSocketType` instead of just the base and subtype
enum (a shortcut `nodeModifySocketTypeStatic` exists for when only
static types are used).
Differential Revision: https://developer.blender.org/D10912
The wayland support requires the following development packages:
libwayland-dev, wayland-protocols, libegl-dev, libxkbcommon-dev,
libdbus-1-dev, linux-libc-dev
Partially revert 7fc220517f, as it
introduced two issues:
- Deleting keys without active keying set was no longer possible, and
- there was no more confirmation popup.
Pressing {key Alt I} in the 3D Viewport now executes
`ANIM_OT_keyframe_delete_v3d`, adjusted to suit both T88068 and T89592:
- If there is an active keying set, delete keys according to that keying
set.
- Otherwise, behave as `ANIM_OT_keyframe_delete_v3d` did before, that
is, delete all keyframes of the selected object and in pose-mode also
of selected bones.
Remove duplicate code from the `ANIM_OT_keyframe_delete` operator. The
actions of the removed code are already performed by the preceding
`keyingset_get_from_op_with_error()` call.
No functional changes.
Graphs are usually large, needing a lot of horizontal scrolling and
they can include more information for debugging.
This patch makes graph more compact horizontally by splitting
labels in lines and removing namespaces.
Furthermore it adds following information:
- Operation ID.
- SetValueOperation float value.
- Optionally, operation node name.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11720
Currently there is no clear way to know if an operation is constant
(i.e. when all rendered pixels have same values). Operations may
need to get constant input values before rendering to determine
their resolution or areas of interest. This is the case of scale, rotate
and translate operations. Only "set operations" are known as
constant but many more are constant when all their inputs are so.
Such cases can be optimized by only rendering one pixel.
Current solution for tiled implementation is to get first pixel
from input. This works for root execution groups, others
need previous groups to be rendered.
On full frame implementation this is not possible, because buffers
are created on rendering to reduce peak memory and there is
no per pixel calls.
This patch evaluates all operations that are constant into primitive
operations (Value/Vector/Color) before determining resolutions.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11490
ld: warning: could not create compact unwind for _ff_rl_init_vlc: stack
subq instruction is too different from dwarf stack size
Similar to rB2de5de57c58521862e0fecc95fc474ea347b7468
Differential Revision: https://developer.blender.org/D11796
Note that this name is essentially never used anywhere, besides as 'information'
mostly accessible from python console. Those embedded IDs are not in Main, so they
are not accessible by name ever, and mostly unusable from animation perspective
(either drivers or fcurves).
Therefore, no breakage is expected in user scripts or addons, nor when
loading in older versions of Blender.
Reviewed By: dfelinto, brecht
Differential Revision: https://developer.blender.org/D11812
During initialization of the platform a debug message is generated and
interpreted by de callback. Here the platform is checked what requires
an initialized platform.
Fixed by giving the platform check less priority in the check.
This option will determine visibility on either render or the viewport
visibility. Same for modifer settings. So it will either evaluate the
depsgrah with DAG_EVAL_RENDER or DAG_EVAL_VIEWPORT.
This not only makes it more flexible, it is also a lot
clearer which visibility / modfier setting is taken into account (up
until now, this was always considered to be DAG_EVAL_RENDER)
This option was always present in the USD exporter, this just brings
Alembic in line with that.
ref. T89594
Maniphest Tasks: T89594
Differential Revision: https://developer.blender.org/D11820
When introduced in {rB61050f75b13e} this was actually working (meaning
it checked the Outliner OB_RESTRICT_RENDER flag and skipped the object if
desired).
Behavior has since then been commented in rBae6e9401abb7 and apparently
refactored out in rB2917df21adc8.
If checked, it seemed to be working (objects marked non-renderable in
the Outliner were pruned from the export), however unchecking that
option did not include them in the export.
Now it changed - for the worse if you like - in rBa95f86359673 which
made it so if "Renderable Objects" only is checked, it will still export
objects invisible in renders. So since we now have the non-functional
option with a broken/misleading default, it is better to just remove it
entirely.
In fact it has been superseeded by the "Visible Objects" option (this
does the same thing: depsgraph is evaluated in render mode) and as a
second step (and to make this even clearer) a choice whether
Render or Viewport evaluation is used can be added (just like the USD
exporter has). When that choice is explicit, it's also clear which
visibility actually matters.
This is breaking API usage, should be in release notes.
ref. T89594
Maniphest Tasks: T89594
Differential Revision: https://developer.blender.org/D11808
From patch D11780 from Erik Abrahamsson.
It parallelizes making the vertices, destruction of map entries,
finding if the result is PWN, finding triangle adjacencies,
and finding the ambient cell.
The latter needs a parallel_reduce from tbb, so added one into
BLI_task.hh so that if WITH_TBB is false, the code will still work.
On Erik's 6-core machine, the elapsed time went from 17.5s to 11.8s
(33% faster) on an intersection of two spheres with 3.1M faces.
On Howard's 24-core machine, the elapsed time went from 18.7s to 10.8s
for the same test.
Adds full frame implementation to this node operations.
No functional changes.
1.3x faster than tiled fallback.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11764
Adds full frame implementation to this node operation.
No functional changes.
1.4x faster than tiled fallback.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11765
Adds full frame implementation to this node operation.
No functional changes.
1.7x faster than tiled fallback.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11766
Adds full frame implementation to this node operation.
No functional changes.
1.5x faster than tiled fallback.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11767
Also replace integer with bool in Ghost API when only used as boolean,
and uint8* with char* in Ghost API when variable is a string.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D11617
Signed-off-by: Nicholas Rishel <rishel.nick@gmail.com>
This node creates a poly spline line in one of 2 modes:
- Line between two points
- Start Point, Direction, and Length
Both modes create splines with only start and endpoints.
A resample node can be used afterward to increase the point count.
Differential Revision: https://developer.blender.org/D11769
This patch adds a very simple node that explicitly converts a float to
an int. While this may seem redundant, it would offer 2 benefits to the
current requirement to use implicit float conversions:
1. It makes the node tree's intent more clear and self-documenting
(especially if changes in the future require integer inputs).
2. It eliminates undefined behavior in current/future nodes from float
inputs by guaranteeing that the input is an integer.
The node offers a variety of rounding techniques to make it more flexible.
Differential Revision: https://developer.blender.org/D11700
This would prevent loading a parent that would only be referenced by
children during a linking operation.
Looks like this missing bit of code has been there since the stone ages,
it is fairly baffling to find that such critical low-levels mistakes can
survive decades in a codebase...
Note that such fully-indirectly linked parent object is not instantiated
in scene currently, this is fairly bad I think, but kind of a different
issue.
This patch extends D11695 to provide full support for Chinese and Korean
input on macOS.
Chinese input notes:
You can input symbolic characters (such as '! , '$') during Chinese input.
The difference from Japanese input is that multiple `insertText` may be
called with a single key down (`keyDown` method). This happens when you input
a symbolic character (such as '! , '$') during conversion.
The conversion is confirmed (`insertText`) and the symbolic character is
entered (`insertText`). To solve this problem, I have `result_text` to
concatenate the strings and store them in `result`.
Korean input notes:
Korean does not display a conversion suggestion window.
Like Chinese, Korean input may call multiple `insertText` methods. Also,
in Korean, the previous confirmation (`setMarkedText` and `insertText`) and
the next conversion is processed (`setMarkedText`) may be called
simultaneously with a single key down (`keyDown` method).
For example:
1. press g ㅎ (`setMarkedText`)
2. press k 하 (`setMarkedText`)
3. press t 앗 (`setMarkedText`)
4. press k 하세 (`setMarkedText`, `insertText`, `setMarkedText`)
Fixed so that the `insertText` and the last `setMarkedText` are processed.
Also, if a control character (such as Arrow, Enter) is input during Korean
input, the conversion will be confirmed (`setMarkedText`, `insertText`) and
the original control character will be processed.
In other words, if you press the left arrow key while typing in Korean, the
cursor will move to the left after the character is confirmed. Therefore, I
modified the `keyDown` method so that the `handleKeyEvent` is called again
after the `insertText` is processed in the `interpretKeyEvents` method.
Differential Revision: https://developer.blender.org/D11699
Blender did not support to input East Asian characters (Chinese, Japanese,
Korean) on macOS. This patch adds support for Japanese input, by implementing
the appropriate processing for the NSTextInputClient protocol.
Technical notes:
* The conversion candidate window is drawn by the input method program calling
`firstRectForCharacterRange`.
* The string before confirmation (called `composite` in blender) is handled in
the `setMarkedText` method called by the input method program.
* The string after confirmation (called `result` in the blender) is processed
in the `insertText` method called by the input method program.
Ref T51283
Differential Revision: https://developer.blender.org/D11695
IME conversion candidate window was displayed at the mouse position, instead of
below the cursor or text selection.
Blender need to tell the input method program where the conversion candidate
window is during Japanese and Chinese input.
In macOS, the `firstRectforCharacterRange` is called when input by the input
method starts, and the position of the conversion candidate window is
specified. Therefore, it is necessary to set the position of the conversion
candidate window before input starts. This patch changes it so that the position
of the conversion candidate window is always set when the cursor is drawn.
Differential Revision: https://developer.blender.org/D11697
File Browser code uses the term "params" for its file selection parameters a
lot. Avoid confusion/ambiguity by calling the notifier listener parameters
"listener_params".
Went back to using Blender's polyfill for triangulation, which is much
faster (time for a 3.1M face boolean went from 103s to 48s).
Had to put in detection for the case that needs the exact triangulator
(bug T86805), and also a fix for non-convex quads (bug T89330).
Blender needs to tell the input method program where the conversion
candidate window is during Japanese and Chinese input.
In macOS, there are displays where the window size and the native pixel size
are different, so the candidate window may appear in an unnatural position.
This patch converts the cursor position x and y for matching macOS window
coordinate. On Windows, GHOST_GetNativePixelSize returns 1, so it has no effect.
Differential Revision: https://developer.blender.org/D11696
When inserting text using IME on a button, the character after the cursor is
displayed before the cursor.
This bug seems to have occurred during the refactoring in D765.
Differential Revision: https://developer.blender.org/D11072
This allows converting between different `destruct_ptr` types (which is
just a `std::unique_ptr` with a custom deleter).
The most common use case is to convert from a derived type to
the type of the base class.
These are scripts for benchmarking Blender features on real-world .blend
files. They were originally written for benchmarking Cycles performance, and
were made generic so they can be used for more Blender features.
The benchmarks can be run locally by developers. But the plan is to also run
these as part of continuous integration to track performance over time.
Currently there are tests for Cycles rendering and .blend file loading.
Documentation:
https://wiki.blender.org/wiki/Tools/Tests/Performance
Main features:
* User created configurations to quickly run, re-run and analyze a selected
subset of tests.
* Supports both benchmarking with existing builds, and automatic building of
specified git commits, tags and branches.
* Generate HTML page with bar and line graphs from test results.
* Controlled using simple command line tool.
* For writing tests, convenient abstraction to run a Python function in Blender
with arguments and return value.
Ref T74730
Differential Revision: https://developer.blender.org/D11662
This adds a viewer node similar to the one in the compositor.
The icon in the headers of nodes is removed because it served
the same purpose and is not necessary anymore.
Node outputs can be connected to the active viewer using
ctrl+shift+LMB, just like in the compositor. Right now this collides
with the shortcut used in the node wrangler addon, which will
be changed separately.
As of now, the viewed geometry is only visible in the spreadsheet.
Viewport visualization will be added separately.
There are a couple of benefits of using a viewer node compared
to the old approach with the icon in the node header:
* Better support for nodes that have more than one geometry output.
* It's more consistent with the compositor.
* If attributes become decoupled from geometry in the future,
the viewer can have a separate input for the attribute to visualize.
* The viewer node could potentially have visualization settings.
* Allows to keep "visualization points" around by having multiple
viewer nodes.
* Less visual clutter in node headers.
Differential Revision: https://developer.blender.org/D11470
Using BMesh operators through the edit-mesh API created a full copy
of the mesh so it was possible to restore the mesh in case
one of the operators raised an error.
Remove support for automatic backup/restore from the EDBM_op_* API's
as it adds significant overhead and was rarely used.
Operators that need this can use the BMBackup API to backup & restore
the mesh in case of failure.
Add warning levels to BMO_error_raise so operators can report problems
without it being interpreted as a request to cancel the operation.
For high-poly meshes creating and freeing a full copy is an expensive
operation, removing this gives a speedup of ~1.77x for most operators
except for "connect_verts" / "connect_vert_pair"
which still uses this functionality.
Previously, any face groups that could not be merged into a face
caused the entire operation to report an error and do nothing.
Now these cases are skipped over, dissolving faces where possible.
- Only create arrays with groups of two or more faces.
- Remove raising exception for zero length arrays.
- Remove redundant exception check (assert there is no exception).
- Use a struct for face array & it's length instead of a NULL
terminated array (removes the need to count faces in a loop).
- Replace '[mce]' with "Mike Erwin".
- Remove references to turn-table author as it isn't useful information,
the author was credited in the commit message.
Now, The weight is used in the randomize parameters of the offset modifier.
This is useful to generate effects like explosions.
Related to the new Vertex Weight modifiers.
A point of confusion about this node is that it doesn't work on the
output of the mesh circle primitive node. This patch adds a warning to
help with that. This avoids adding a warning when the geometry set
input has no mesh.
Differential Revision: https://developer.blender.org/D11771
As noted in a comment now, these functions only update a cache, so they
don't change the logical state of the mesh, which is "it will have the
data when necessary." Using a const argument will help const correctness
when accessing an object's evaluated mesh.
This code was written for the File Browser together with the Asset Engine
design, that is not part of the Asset Browser/System design anymore. Updated
comments accordingly.
`FileDirEntryRevision` was actually used, but I removed it and moved the used
members to the parent `FileDirEntry`, since there is no concept of revisions
currently.
There should be no functional changes.
Add a new transformation space choice for bone constraints, which
represent the local transformation of the target bone in the constraint
owner's local space.
The use case for this is transferring the local (i.e. excluding the
effect of parents) motion of one bone to another one, while ignoring
the difference between their rest pose orientations.
The new option replaces the following setup:
* A `child` bone of the `target`, rotated the same as `owner` in rest pose.
* A `sibling` bone of the `target`, positioned same as `child` in rest
pose and using Copy Transforms in World Space from `child`.
* The `owner` bone constraint uses Local Space of `sibling`.
(This analogy applies provided both bones use Local Location)
Differential Revision: https://developer.blender.org/D9493
This constraint can be naturally viewed as a prototype for a future
4x4 matrix math node (or subset thereof), since its basic semantics
already is matrix assignment. Thus it makes sense to add math options
to this constraint to increase flexibility in the meantime.
This patch adds support for several operations that would be useful:
- An option to remove shear in the incoming target matrix.
Shear is known to cause issues for various mathematical operations,
so an option to remove it at key points is useful.
Constraints based on Euler like Copy Rotation and Limit Rotation
already have always enabled shear removal built in, because their
math doesn't work correctly with shear.
In the future node system shear removal would be a separate node
(and currently Limit Rotation can be used as a Remove Shear constraint).
However removing shear from the result of the target space conversion
before mixing (similar to Copy Rotation) has to be built into
Copy Transforms itself as an option.
- More ways to combine the target and owner matrices.
Similar to multiple Inherit Scale modes for parenting, there are
multiple ways one may want to combine matrices based on context.
This implements 3 variants for each of the Before/After modes
(one of them already existing).
- Full implements regular matrix multiplication as the most basic
option. The downside is the risk of creating shear.
- Aligned emulates the 'anti-shear' Aligned Inherit Scale mode,
and basically uses Full for location, and Split for rotation/scale.
(This choice already existed.)
- Split Channels combines location, rotation and scale separately.
Looking at D7547 there is demand for Split Channels in some cases,
so I think it makes sense to include it in Copy Transforms too, so that
the Mix menu items can be identical for it and the Action constraint.
Differential Revision: https://developer.blender.org/D9469
To some degree these are changes in preparation of further Asset Browser
related changes, see D11119. But also, the current UUID design was written for
the old Asset Engine design, which isn't part of the current Asset
Browser/System design anymore.
And lastly, "UUID" are a well established standard
(https://en.wikipedia.org/wiki/Universally_unique_identifier) which this
implementation didn't follow. What we have here is more of an index, or a
unique identifier (https://en.wikipedia.org/wiki/Unique_identifier).
So this does the following changes:
* Renames "UUID" to "UID"
* Changes the type of the UID to (a typedef'ed) `uint32_t`, which is more than
enough for our current asset system design and simplifies things.
* Due to the new type, we can avoid allocations for hash-table storage.
* Add/use functions for UID handling
Note that I am working on a major rewrite of the file-list code. Meanwhile we
want to keep things sensible.
his new modifier allows to generate weights base on:
* Angle of the stroke relative to object or world orientation. For example, if the value is 90, the maximum weights will be for vertical lines and minimum for horizontal lines.
* Distance to Target object. The distance calculated is normalized to get valid weights between 0 and 1.0.
The weights are created in an existing vertex group and the data can be replaced or mixed with the existing value to combine different weight effects. The minimum parameter, allows to define the minimum weight generated. This is useful to avoid very low weights.
The generated weights can be used in any modifier. For example, the angle weight value can be used to mimic FreeStyle Caligraphy modifier using the weight with the thickness modifier.
Also some modifier has been changed to inlude a new option to use the weights as factor of the effect.
As result of this change, the fading option has been removed from Thickness and Opacity modifiers because this can be done using the new modifier, it's not logic to repeat the same.
Reviewed By: mendio, filedescriptor
Differential Revision: https://developer.blender.org/D11604
Generally the evaluated mesh should not be changed, since that is the
job of the modifier stack. Current code is far from const correct in
that regard. This commit uses a const variable for the reult of
`BKE_object_get_evaluated_mesh` in some cases. The most common
remaining case is retrieving a BVH tree from the mesh.
In the Win32 platform our setTitle() can properly assign a Unicode
utf-8 window title. Unfortunately our getTitle() will only read regular
8-bit character strings. This means that we can never compare what we
set to what we get. This patch updates getTitle() to use Unicode-aware
GetWindowTextLengthW and GetWindowTextW.
see T88909 for an example of this affecting user experience.
Differential Revision: https://developer.blender.org/D11782
Reviewed by Ray Molenkamp
Handle width calculation was incorrect in drawing code. This caused
handles to be invisible when zoomed out.
After fixing math, handles become too large, so now they are constrained
to quarter of strip width, which feels more natural and represents
clickable area more closely.
`sequence_handle_size_get_clamped()` did not return size in pixels, but
in 2D-View space, this comment was corrected.
SeqCollection wasn't freed.
It wasn't easy to find culprit so added argument to
SEQ_collection_create() to pass function name.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11746
Address initial feedback:
- Use checkboxes instead of radio buttons
- Hide snapping distance control from UI
- Tweak snapping line color - use selected strip color, 50% transparency. Similar to other editors
- Draw 2px thick line, since strip outline is also 2px thick
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D11759
When multiple File or Asset Browsers would load at once (e.g. when loading a
file with two File Browsers open) and they would load multiple directories or
.blend files (using the Recursions option in the File Browser or loading an
asset library with multiple .blends), often only one File/Asset Browser would
correctly load all files. Others would be incomplete or entirely empty. That
was because of a race condition, where the directories or .blend files would be
loaded concurrently and the first one that finished would cancel the other
ones. This again happened because they used the job system with the same
"owner", which by design makes all jobs with the same owner cancel as soon as
the first is finished.
Address this by making sure they have different owners. That is, not the scene
anymore, but the filelist the job belongs to. Doesn't make much sense to use
the scene as owner for scene-unrelated file loading anyway.
Steps to reproduce were:
* Open two File Browsers as regular editors.
* In the Display Settings popover, set "Recursions" to 2 or 3 levels.
* Navigate to a directory with plenty of subdirectories in both File Browsers.
* Save the file.
* Reload the file, one of the File Browsers likely has an incomplete file list.
Alternatively, use Asset Browsers and open an asset library containing multiple
.blends.
This patch writes the timecode in the .srt file relative to the start
frame of the scene. If the timecode is global but scene does not start
at frame 0 the subtitles don't match if they get loaded in an external
video player. Muted strips will be ignored. Don't allow negative
timecodes in .srt.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11762
The error codes could be used to look up messages from a table
of messages however this wasn't especially useful.
Now all calls to BMO_error_raise must inclue a message.
Edit-mesh partial update logic assumed translate didn't need normals
to be recalculated (for faces with all vertices being transformed).
However translate can optionally rotate which requires
all transformed normals to be updated.
Check for this case and use the previous partial-update method
when it modified extra geometry, so the normals are properly reset.
Further updates need not recalculate them.
Supporting both object & edit-mode is more involved.
Both cases are now supported with object mode tracking the last-used
state for rotation so it's only reset once when rotation is disabled.
Normals now includes many functions including normal splitting &
custom normal manipulation split this into it's own file
to centralize related functions.
This node has two modes: the first mode computes a circle from three
locations and a resolution. The second takes radius and resolution.
The first mode also outputs the center of the computed circle as
a vector.
Differential Revision: https://developer.blender.org/D11650
This changes `UI_but_func_tooltip_set` so that it allows passing a custom free function, which has two benefits:
* The caller can pass `null` to indicate that the value should not be freed.
* Arbitrary c++ data can be passed to the callback (before the struct had to be trivially destructible).
I added `uiFreeArgFunc` and used it in other places where appropriate.
Differential Revision: https://developer.blender.org/D11738
Caused by {rBfba9cd019f21}.
Above commit reordered toolsettings snapping flags but missed remapping
these for the UV toolsettings in versioning code.
Differential Revision: https://developer.blender.org/D11756
Multi-threading support for transform modes: bevel-weight, crease,
push-pull, rotate, shear, shrink-fatten, skin-resize, to-sphere,
trackball & translate.
This is done using a parallel loop over transform data.
From testing a 1.5million polygon mesh on a 32 core system
the overall performance gains were between ~20-28%
To ensure the code is thread-safe arguments to shared data are const.
Reviewed By: mano-wii
Creates a Curve with 1 Bezier Spline from four positions (start,
start handle, end handle, end) and a resolution. The handles are
aligned and mirrored automatically. An "Offset" mode is also included
to allow specifying the handles relative to the control points.
The default settings recreate the existing default Bezier Curve in the
3D viewport add menu.
Differential Revision: https://developer.blender.org/D11648
Reserve the term count for values that require calculation
(typically linked lists).
Without this convention it's difficult to know if using a length
accessor function in a loop will be O(N^2) without inspecting the
underlying implementation.
This patch is for a node that creates a poly spline from a
3 point quadratic Bezier. Resolution is also specified.
Curve primitives design task: T89220
Differential Revision: https://developer.blender.org/D11649
This node creates a curve spline and gives control for the number of
rotations, the number of points per rotation, start and end radius,
height, and direction. The "Reverse" input produces a visual change,
it doesn't just change the order of the control points.
Differential Revision: https://developer.blender.org/D11609
This patch adds a Curve Primitives menu in Geometry nodes with an
initial entry of a star primitive.
The node is a basic star pattern node that outputs a poly spline.
Options control the inner and outer radius, the number of points,
and the twist of the valleys.
Differential Revision: https://developer.blender.org/D11653
Change snapping behavior to snap strip edges when they are close to snap point.
Default behavior is, that each transformed strip is snapped to any other strip.
Implement snapping controls in sequencer tool settings. These controls include:
- Snapping on/off
- Ability to snap to playhead and strip hold offset points
- Filter snap points by excluding sound or muted strips
- Control snapping distance
Snapping controls are placed in timeline header similar to 3D viewport
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11646
When using multiple monitors that differ in scale and/or dpi, the
varying sizes of the window titles and borders can cause the placement
of those windows to be out by a small amount. This patch adjusts for
those differences on Windows 10 and newer.
see D10863 for details and examples.
Differential Revision: https://developer.blender.org/D10863
Reviewed by Ray Molenkamp
`UILayout.operator_menu_enum()` now returns the operator properties, just like
`UILayout.operator()`. This makes it possible to set options for the operator
displayed in the menu. In C it can be done through the new
`uiItemMenuEnumFullO()` or `uiItemMenuEnumFullO_ptr()`.
It's reasonable to have this, probably just a small thing never bothered to
add. D10912 could use it, the following comment can be addressed now too:
https://developer.blender.org/diffusion/B/browse/master/source/blender/editors/space_nla/nla_buttons.c$583-586
This is just some cleanup of the Win32 window creation code. After
CreateWindowExW() this patch uses some early exits to replace some
potentially confusing if blocks. No functional changes.
Differential Revision: https://developer.blender.org/D11446
Reviewed by Ray Molenkamp
When compiling BSDF nodes, we only assing stack space to the normal and
tangent inputs if they are linked. However, it could be that the
ConstantFolder removed the link, so checking if there is a link fails
to take this into account.
To fix this, added a flag to ShaderInput to keep track of whether a
constant was folded into the input, and use it as well to verify that
the socket is linked when assigning stack space.
Reviewed By: brecht
Maniphest Tasks: T70615
Differential Revision: https://developer.blender.org/D11731
Mask value works just like transparency mask.
You are able to select intersection lines inside a
collection or, between collections.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D11309
Removed in b787581c9c as it's comment
noted it was bad code, the reason for it's necessity was no longer valid.
Add this back with comment explaining why it's still needed.
Use const arguments to simplify further optimizations.
Transforming elements shouldn't need to change their containers
data-structures.
ElementResize for grease pencil stroke thickness was
modifying TransInfo.num & TransInfo.values_final.
Now copies are operated on to preserve const correctness although
it's worth investigating if this can be avoided altogether.
- Added functions to check if the cursor is at a number.
- Added function to parse a number.
- Joined skip_separator functions.
- Added function to check if cursor is at any given set of characters.
AMD Drivers didn't report an additional space in the rendered. This made
testing for the HQ workaround fail and the issue appeared back on
certain cards.
This fix will test with surrounding spaces or if the renderer name
endswith the given string. If any of these are the case the hq normals
workaround will be enabled.
Fixing small typo of word "multi" in function identifier by renaming
"count_mutli_input_socket_links" to "count_multi_input_socket_links"
Differential Revision: https://developer.blender.org/D11732
Reviewed by Hans Goudey
This commit avoids duplicating the deformed control point
list twice by modifying the list in the object curve cache directly.
For curves, the original control point data was duplicated into a
local listbase, deformed, used to create the "bevel list" data, and
then duplicated again for the object-level storage of deformed
control points. Text objects and surface objects had a similar
unnecessary duplication.
The curve bevel list was freed, and then freed again in a call to the
function that recalulates it. The curve "anim path" data was freed
only to be freed again in its calculation function as well. Also move
the anim_path calculation directly after the bevel list creation to
make its requirements more explicit.
Surface objects were already handled by an early return in the main
"curve types" function. This commit splits them, renames the funtions
to match (and be more consistent with other names), and sanitizes the
checking of object types.
Every call to `BKE_displist_make_curveTypes` already checks the object
type beforehand, there is no need to check it again. Also removed an
outdated comment.
`BKE_displist_make_curveTypes` had a `for_orco` argument that was
always false in calls to the function. Removing it allows the curve
displist and modifier evaluation code to become simpler. There are
some related cleanups in rBdf4299465279 and rB93aecd2b8107.
Sometimes the current spline list isn't part of the original curve, like
when using the deformed control points, etc. This will be helpful in
the curve modifier stack.
While the const correctness of `ListBase` is quite limited, it's helpful
to have a way to retrieve the `Nurb` list from curve object data without
casting away const from the curve.
There is no longer a need to resize windows that are _already_ open,
since temporary windows can no longer take over the space used by other
already-open temporary windows. This primarily affects Preferences and
Render windows.
see D11721 for more details.
Differential Revision: https://developer.blender.org/D11721
Reviewed by Julian Eisel
Likely uncovered by 6c97c7f767, the actual mistake would be from
6942dd9f49.
The hacks to display text buttons for renaming in UI-Lists used the emboss of
the text button for handling logic. It relied on the emboss `NONE` but we also
introduced `NONE_OR_STATUS` with 6942dd9f49. Both values need to be treated
equally for the logic of this hack to work.
The change in `interface_layout.c` is actually not needed for this exact issue,
but it's the correct thing to do. There may actually be more cases where `NONE`
and `NONE_OR_STATUS` need to be treated equally. Something to be checked still.
Custom properties defined on objects are not accessible from the
attribute node when rendering a volume in Cycles. This is because
this case is not handled.
To handle it, added a primitive type for volumes in the kernel,
which is then used in the initialization of ShaderData and to
check whether an attribute lookup is for a volume.
`volume_attribute_float4` is also now checking the attribute
element type to dispatch to the right lookup function.
Reviewed By: #cycles, brecht
Maniphest Tasks: T87194
Differential Revision: https://developer.blender.org/D11728
Weird 'embedded for overrides' flag of embedded IDs (including ShapeKeys
in override context) was not properly cleaned up when making an override
fully local.
Reported by studio, thanks.
@jbakker should be backported to 2.93LTS if possible.
In ViewLayer view, overrides of excluded collections would then show one
level higher, due to bad handling of those excluded collection in draw
code.
Reported by studio, thanks.
@jbakker should be backported to 2.93LTS.
Passing `emboss=False`set `UI_EMBOSS_NONE` in the layout, which
completely disables button background colors for things like animation
state. This commit changes that to `UI_EMBOSS_NONE_OR_STATUS`,
which effectively restores the behavior to what it was prior to the
addition of that flag, with the added option to completely disable
the status emboss with `UI_EMBOSS_NONE`.
This adds a new Attributes panel in the mesh properties editor.
It shows a list of all the generic attributes on the mesh.
In the future, we want to show built-in and other attributes in the
list as well. Related technical design tasks: T88460, T89054.
There is also a new simple name collision check that warns the user
when there are multiple attributes with the same name. This can be
problematic when the attribute is supposed to be used in geometry
nodes or during rendering.
Differential Revision: https://developer.blender.org/D11276
This was a stupid mistake in my original commit that added this item.
While this is an API breakage, the name is simply wrong, and it is only
6 months old, and slightly niche.
Differential Revision: https://developer.blender.org/D11701
This patch adds a function where you can specify occlusion effectiveness from 0 to 255 layers per face for a given mesh material.
Reviewed By: Sebastian Parborg (zeddb)
Ref D11308
Offset rays from the flat surface to match where they would be for a smooth
surface as specified by the normals. In the shading panel there is now a
Shading Offset (existing option) and Geometry Offset (new).
The Geometry Offset works as follows:
* 0: disabled
* 0.001: only terminated triangles (normal points to the light, geometry
doesn't) are affected
* 0.1 (default): triangles at grazing angles are affected, and the effect
fades out
* 1: all triangles are affected
Limitations:
* The artifact is still visible in some cases, it could be that some quads
require to be treated specifically as quads.
* Inconsistent normals cause artifacts.
* If small objects cast shadows to a big low poly surface, the shadows can
appear to be in a wrong place - because the surface moved slightly above
the geometry. This can be noticed only at grazing angles to light.
* Approximated surfaces of two non-intersecting low-poly objects can overlap
that causes off-the-wall shadows.
Generally, using one or a few levels of subdivision can get rid of artifacts
faster than before.
Differential Revision: https://developer.blender.org/D11065
* Reduce code duplication.
* Give methods more standardized names (e.g. `move_to_initialized` -> `move_assign`).
* Support wrapping arbitrary C++ types, even those that e.g. are not copyable.
* Use unsigned integer types for bit operations.
* Use 64 bit integer instead of 32 bit.
* Support scoped enumes (aka `enum class`) by adding some more casts.
The crash was caused by a mistake in 5f9677fe0c
where the pointers to the custom data layers would be overwritten with the one
for the first layer, as CustomData_duplicate_referenced_layer is only about the
first layer. customData_duplicate_referenced_layer_index should be used instead
to duplicate the right layer.
Old implementation has a single parser of many different
formats. With the introduction of Vulkan this would lead
to another parser in the same function. This patch
separates the log parsing using a visitor pattern so the
log parsing can be configured per GPU backend or even
per driver.
With Vulkan we manage the compiler our self so the parsing
will become more straight forward. The OpenGL part depends
on many factors (OS, Driver) and perhaps even GPU.
This patch is part of: T87228.
Support accurate random selection for:
- CURVE_OT_select_random
- LATTICE_OT_select_random
- OBJECT_OT_select_random
Ref D11685
CollectionLineart does not care about the configurations
in master collection.
Other options are not applicaple for master collection as well.
Hence hiding it.
Reviewed by Dalai Felinto (dfelinto)
Differential Revision: https://developer.blender.org/D11702
This option allow users to see the view layer in context to the
others. It is particularly useful to see which view layers have which
collections enabled, and their render settings (holdout, ...).
This option is off by default.
Differential Revision: https://developer.blender.org/D11708
In preparation of supporting vulkan. Draw/GPU tests should use
GPU_TEST or DRAW_TEST macros. These macros will run the test
on available drawing context backends like OpenGL or Vulkan.
As in master there is only an OpenGL backend nothing changed.
The problem was an optimization I put in to triangulate quads.
It was wrong if the quad, after projecting onto a 2d plane, was
not convex. Handling quads the same as other faces fixes the bug.
Unfortunately, this will slow down Exact Boolean when the input has
many quads (the usual case, of course).
Will attempt to fix that with a later change, but for now, this
at least restores correctness.
Now, the mask layers are copied and later a cleanup is done in order to verify all mask layer exist in destination object. If the layer mask does not exist, it's removed from the list.
This is related to T89234.
Skip updating normals & tessellation for contiguous geometry regions
for operations such as translate & uniform scale.
This means when all geometry is selected, no updates are needed
as the relative locations of vertices aren't being modified.
Performance:
As this is skipping a multi-threaded operation,
larger improvements are noticeable on systems with fewer cores.
- ~1.15x to ~1.3x overall gain for 32 cores.
- ~1.7x to ~2.2x overall gain for 1 core (limited using `-t 1` argument).
Details:
- Rotate & non-uniform scale only skip tessellation.
- Proportional editing and axis-mirror have special handling
ensure geometry is properly grouped before considering
a face part of a single group that can be skipped.
- Loose vertices always need their normals to be recalculated
since they're calculated based on the location.
- Non-affine transform operations such as shrink-fatten & bend,
don't take advantage of this optimization.
- Snap projection also disables the optimization.
editor dataset region always showed 0. This was caused by a conditional
statement that needed a domain to be set, which is not the case for
Instances component type.
Reviewer: Hans Goudey (Hoogly Boogly)
Differential Revision: https://developer.blender.org/D11710
This patch enables sample filtering when scaling preview images in File
Browser, improving the result a bit. Reduces blockiness and other
artifacts when enlarging the images.
see D11706 for details and examples.
Differential Revision: https://developer.blender.org/D11706
Reviewed by Julian Eisel
`t->values` does not necessarily represent a final value of the
transformation, as each mode treats this value differently.
So, unfortunately, we cannot have a generic offset solution for modal
transform operations. Offset needs to be handled by each mode.
Note: Currently only, `Move`, `Rotate` and `Resize` support this.
When baking some data, we create a new Mesh with edits and modifiers applied.
However, in some cases (e.g. when there is no modifier), the returned Mesh is
actually referencing the original one and its data layers. When autosmooth is
enabled we also split the Mesh. However, since the new Mesh is referencing the
original one, although `BKE_mesh_split_faces` is creating new vertices and edges,
the reallocation of the custom data layers is preempted because of the
reference, so adding the new vertices and edges overwrites valid data
To fix this we duplicate referenced layers before splitting the faces.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D11703
User can specify filtering options inside line art modifier,
like inverting selection and including face mark region border.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D11307
This patch adds a left aligned sidebar to the spreadsheet editor. This
Sidebar can be used to navigate the geometry component types and
attribute domains. It also provides a quick overview of domain sizes.
It replaces the two dropdowns in the regions header.
Next step will be to add the domain cycling shortcut
using the CTRL + mouse wheel.
Reviewer: Dalai Felinto (dfelinto), Julian Eisel (Severin),
Hans Goudey (HooglyBoogly).
Differential Revision: https://developer.blender.org/D11046
This patch includes: Floating edge type support,
Special chaining option for floating edge,
Chaining option for reducing jagged edges when floating
edges are involved.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D11306
* Mark either all or no class methods with override
* Don't use zero sized array since it has a different size in C and C++.
Using a little more memory here is not significant.
* Don't use deprecated mechanism to mark private GSet members in clang
just like we don't for MSVC, it warns even for simple zero initialization.
In-progress Safari download files/packages are now recognized as bundles
and therefore not treated as directories.
Differential Revision: https://developer.blender.org/D11613
This resolves a bottleneck where every update while transforming
copied the entire mesh data-block, which isn't needed as the edit-mesh
is the source of the data being edited.
Testing shows a significant overall speedup when transforming:
- ~1.5x with a subdivided cube 1.5 million vertices.
- ~3.0x with the spring mesh (edit-mode with modifiers disabled,
duplicated 10x to drop performance).
Reviewed By: sergey
Ref D11337
Avoid computationally expensive copying operations
when only some settings have been modified.
This is done by adding support for updating parameters
without tagging for copy-on-write.
Currently only mesh data blocks are supported,
other data-blocks can be added individually.
This prepares for changing values such as edit-mesh auto-smooth angle
in edit-mode without duplicating all mesh-data.
The benefit will only be seen when the user interface no longer tags
all ID's for copy on write updates.
ID_RECALC_GEOMETRY_ALL_MODES has been added to support situations
where non edit-mode geometry is modified in edit-mode.
While this isn't something user are likely to do,
Python scripts may change the underlying mesh.
Reviewed By: sergey
Ref D11377
Very stupid typo in override apply code on GP modifiers (typical
copy/paste mistake from original modifiers code).
@jbakker this should be back-ported to 2.93LTS.
This patch enables bound box check when loading geometry
into line art. Works with overscan as well. Will discard
object if its bbox completely lies in one side of the
clipping space frustum.
Reviewed by: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D11545
For scenes that have a lot of edges, this could potentially
save some time generating individual strokes that are outside
camera frustum.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D11525
682a74e090 renamed Bendy Bones properties and replaced existing float
properties with float-vector properties. This updates the property names used
by the action baking operator (`NLA_OT_bake`).
Iteration was incorrectly calling the same object. Had it called every
window it would still be unnecessary as WM_DISPLAYCHANGE is sent to all
broadcast receiving windows.
Previously the smooth shading of the voxel remesher was controlled by a
mesh property. With this change, the output will try to match the
current shading of the object. This only takes into consideration the
shading mode of the first polygon of the model, but it is probably what
most users expect as it works as intended with the shade smooth/flat
object mode options.
Reviewed By: JulienKaspar, JacquesLucke
Differential Revision: https://developer.blender.org/D11626
SCULPT_nearest_vertex_get expects a distance, not a distance squared.
This should make symmetry work as expected, but it still can fail if the
mesh topology is not completely symmetrical.
Reviewed By: JacquesLucke
Maniphest Tasks: T89221
Differential Revision: https://developer.blender.org/D11642
Adds full frame implementation to this node operations.
No functional changes.
1.2x faster than tiled fallback.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11638
Adds full frame implementation to Image node operations.
Mostly refactored into buffer utility methods for reuse in other
operations.
No functional changes.
1.8x faster than tiled fallback.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11559
When use smooth tool in a cyclic stroke, the smoothing algorithm was not using the adjacent points if these are the end or start of stroke.
Now, the smooth uses the other extreme of the stroke to compute smoothness.
This change will ensure at least one 'local' collection can host the new
'local' override of all objects (indirectly) overridden by this
operation, such that no new override of object ends up in master
collection (which can become extremely messy in production files).
In practice, it means often at least one of the linked collection owning
those objects also has to be overridden.
NOTE: This only affect cases where root overridden linked object has
some dependencies outside of its own root linked collection. While this
situation should be avoided, it cannot always be, so we try to support
it as best as we can.
This is again in the fuzzy area of how embedded IDs are handled
respectively by partial undo code and depsgraph... Should not be
necessary currently, but better be safe and explicit, and also tag
those embeded IDs from re-used owner ID.
In certain CMake configurations it was possible
that OCIO gave linker errors due to it thinking
it was using the shared library rather than the
static library we ship.
Would crash when adding or removing a collection directly to the master
collection of a scene.
Consequence of change to handle depsgraph-controlled evaluation of some
IDs (like excluded collections which do not get evaluated and do not get
a COW anymore). See rBcf4258673755 and D10907.
Note that this mostly demonstrates once again how weak and flacky our
handling of embedded IDs still remains, with some part of the code
handling them as independent IDs, some as fully local/private data, some
as a mix of both... and lots and lots of custom handling code and corner
cases that are a bottomless pit of issues.
Also quiet incredible that this was not reported already, luckily this
original change did not make it to 2.93 release.
The check on the transformation introduced in rBb313525c1bd0 to fix
T88515 would sometimes prevent to update the light if the Blender object
changed. To fix this, reverse the order in which the checks happen so
that we do not shortcuit the object change check.
Note that this commit uses a second LogRef (`blo.readfile.undo`) for undo
specific meassages. Allows to use `--log "*undo*"` cli option to match
all undo reporting.
Also did some minor tweaks to some reports on the way.
Those were missing proper (explicit) object cache clear, and DEG
tagging.
Note that this was most likely not an common issue in practice (Collection
object cache clearing recursively goes into all parents, so master
collection would only miss it in case they had no child collections at
all, and tagging of those happens almost always at other steps on
remapping). But better to be explicit and consistent here in any case.
Fix T88808.
Caused by {rB5f2c5e5bb8c15bf0d6679351e3482f9c38c00935}
object type for `TEXT object` was missing in following check
that's why `Set Origin` option was lost from object context menu.
Reviewed By: lichtwerk
Maniphest Tasks: T88808
Differential Revision: https://developer.blender.org/D11495
This reverts commit rB3a48147b8ab92, and fixes the issues with linking
etc.
Change compared to previous buggy commit (rBf8d219dfd4c31) is that
new `BlendFileReadReports` reports are now passed to the lowest level
function generating the `FileData` (`filedata_new()`), which ensures
(and asserts) that all code using it does have a valid non-NULL pointer
to a `BlendFileReadReport` data.
Sorry for the noise, it's always when you think a change is trivial and
do not test it well enough that you end up doing those kind of
mistakes...
Fix by reverting the part of ec30cf0b74
that assigned `but->editval` in `ui_numedit_begin_set_values`.
Causing access freed memory when using tab to switch
to a numeric input and then leaving the textbox by clicking outside.
This was because `ui_numedit_begin_set_values` shouldn't need to set
`but->editval` and overwrite the pointer.
This would set a pointer that had previously been freed,
causing a `NULL` check to fail later on.
Ref D11679
When cut a stroke of 1 point, the clean up done to avoid keep 1 point strokes removes the memory, but the pointer to the first stroke was not set to NULL. As this pointer is invalid now, any use of this produces a segment fault because the pointer is corrupted..
Sphinx has rather loose dependency requirements which can cause issues if we aren't careful.
As a solution they recommend that you pin sphinx dependency versions
Currently the emboss is only fading on left side of the widget,
resulting in the emboss extending vertically on the right side
and ending abruptly. This patch fixes this by also fading the
emboss on the right side and making it symmetric.
Differential Revision: https://developer.blender.org/D10810
This fixes T88346.
The code is also more readable by making a better distinction between
the texts used for Distances, "Proportional Size" and "AutoIK-Len".
And the text used to translate the "Proportional Size" is reused.
This patch fixes many minor spelling mistakes, all in comments or
console output. Mostly contractions like can't, won't, don't, its/it's,
etc.
Differential Revision: https://developer.blender.org/D11663
Reviewed by Harley Acheson
This problem has surprisingly been there for quite a few months.
For point clouds all attributes were handled the same, even "position",
which should be transformed when combining source points into the
destination.
Previously the code assumed that curve instances had no attributes.
This is true when the data came from curve objects, which don't support
attributes currently, but it isn't necessarily true when retrieving curves
from evaluated geometry sets.
Make the virtual functions protected and simpler, so that the logic is
better contained in the base class's implementation. Also introduce a
`copy_without_attributes` method to be used for realizing instances.
Add direct user feedback (as a warning report) to user when recursive
resync of overrides was needed.
And some timing (as CLOG logs) about main readfile process steps.
This is essentially adding a new BlendFileReadReport structure that wraps
BKE_reports list, and adds some extra info (some timing, some info about
overrides and (recursive) resync, etc.).
Allows to decompose a given amount of seconds into a random set of
days/hours/minutes/seconds/milliseconds values.
Also add matching test.
Differential Revision: https://developer.blender.org/D11581
Delay depsgraph visibility update tagging until it is known that
graph relations are up to date, and until it is known that the graph
is actually needed to be evaluated.
Differential Revision: https://developer.blender.org/D11660
Currently, the OptiX BVH build options are selected based on whether
we are in background mode (final renders) or not (viewport renders).
In background mode, the BVH is built for fast path tracing and low
memory footprint, while in viewport, it is built for fast updates.
However, on platforms without OpenGL support, the background flag is
always set to true and prevents using fast BVH builds in the viewport.
Now, the BVH options derive from the Scene BVH settings:
* if BVH is static, a fast to trace BVH is built
* if BVH is dynamic, a fast to update BVH is built
Reviewed By: #cycles, brecht
Differential Revision: https://developer.blender.org/D11154
Apply the same fix for T32214 (edge-select failing) to bones
which also failed when their end-points were outside of the view.
- Add V3D_PROJ_TEST_CLIP_CONTENT support for edit & pose bone iterator
and use for selection operators.
- Remove unnecessarily complicated checks with pose-mode lasso tagging.
- Correct error in pose-mode LassoSelectUserData.is_changed
(currently harmless as it's not read back).
`src` and `dst` are perfectly clear, and avoid repeating unecessary
characters when writing the variables many times, allowing more space
for everything else.
When CMake detects and incompatible Python version
it errors out with an error saying at-least python 3.9
is required, but doesn't mention the version it detected.
This makes troubleshooting the problem harder than it
needs to be.
This diff changes the error message to include the python
version CMake detected.
Differential Revision: https://developer.blender.org/D11666
Reviewed By: Ray Molenkamp
This adds preliminary VS 2022 support, since
there currently is no CMake version that
supports the VS2022 IDE only ninja support
was tested.
IDE support should work without any additional
changes as soon as an updated CMake becomes
available.
As VS2022 appears to keep binary compatibility
with earlier MSVC versions, the current SVN
libraries will work for this version.
This commit optimizes the node for the case where it works on many
splines by allowing it to generate mesh data from their combinations
in parallel. By itself, this made the node around twice as fast in my
test file with a result of 20 million vertices, around 600ms instead of
1.2s before.
That isn't actually a very good result; it reveals another bottleneck,
a single threaded loop over all face corners in the mesh normal
calculation code. As a simple change that might improve performance
in some situations, this commit moves normal calculation out of this
node, so at least the work isn't wasted if the mesh is changed later
on in the node tree anyway.
The depth cache (located in `RegionView3D::depths`) is used for quick
and simple occlusion testing in:
- particle selection,
- "Draw Curve" operator and
- "Interactive Light Track to Cursor" operator,
However, keeping a texture buffer in cache is not a recommended practice.
For displays with high resolution like 8k this represents something
around 132MB.
Also, currently, each call to `ED_view3d_depth_override` invalidates
the depth cache. So that depth is never reused in multiple calls from
an operator (this was not the case in blender 2.79).
This commit allows to create a depth cache and release it in the same
operator. Thus, the buffer is kept in cache for a short time, freeing
up space.
No functional changes.
This patch uses threading to flush selection from verts to edges and
from edges to faces. The solution is lockless and should scale well on
modern CPU architectures.
Master:{F10185359}
Patch:{F10185361}
End user performance went from 3.9 to 4.6 FPS (Stanford Dragon) but that
was measured on a Intel Core i7-6700 CPU and AMD RX480 Gpu. The more
cores the better improvements you get.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11644
This resolves a long standing bug in edge selection
(picking, circle, box & lasso).
Now when one of the edges vertices fails to project into screen space,
the edge is clipped by the viewport to calculate an on-screen location
that can be used instead.
This isn't default as it may be important for the on the screen location
not to be clipped by the viewport.
Adds two new output modes to the CDT api which detect and remove
holes. A hole is a face from which a ray shot to the outside
intersects an even number of constraint edges, except we don't
count constraint edges in the same connected region of faces,
where a region is connected via non-constraint edges.
These modes are useful for filling in outlines meant to represent
text characters and the like.
Original patch was from Erik Abrahamsson, modified by me to work
with the "valid Bmesh" output type too. I also added tests
for the new modes.
Caused by improper testing on my part, assuming a helper function
existed in the industry compatible keymap file, and also assuming it
also used the N and T keys for the left and right side-regions.
A different data structure / implementation is used for curves in the
node tree currently. Converting from the DNA `Curve` structure to this
wasn't slow, but it's nice to decrease overhead. In a test of 14000
splines with 128000 points, this halves the runtime from about 5ms
to about 2.5ms.
The spreadsheet filter tried to apply the mesh selection filter on non-
mesh geometry components. Add a check for the component type,
and also refactor the function to be more easily readable.
The normals were broken because the normal calculation mode wasn't set.
This patch adds a default normal mode so all code creating a spline does
not necessarily have to set it manually. In the future there should be a
way to change this value in the node tree.
- Multi-thread BKE_mesh_recalc_looptri.
- Add BKE_mesh_recalc_looptri_with_normals,
this skips having to calculate normals for ngons.
Exact performance depends on number of faces, size of ngons and
available CPU cores.
For high poly meshes the isolated improvement to BKE_mesh_recalc_looptri
in my tests was between 6.7x .. 25.0x, with the largest gains seen in
meshes containing ngons with many sides.
The overall speedup for high poly meshes containing quads and triangles
is only ~20% although ngon heavy meshes can be much faster.
Remove `seq->tmp` usage from transform code. It was used to tag strips
that need to be "shuffled". Pass these strips in `SeqCollection`
instead.
Reviewed By: sergey, mano-wii
Differential Revision: https://developer.blender.org/D11631
This patch adds support for filtering rows based on rules and values.
Filters will work for any attribute data source, they are a property
of the spreadsheet rather than of the attribute system. The properties
displayed in the row filter can depend on data type of the currently
visible column with that name. If the name is no longer visible, the
row filter filter is grayed out, but it will remember the value until
a column with its name is visible again.
Note: The comments in `screen.c` combined with tagging the sidebar
for redraw after the main region point to a lack of understanding
or technical debt, that is a point to improve in the future.
**Future Improvements**
* T89272: A search menu for visible columns when adding a new filter.
* T89273: Possibly a "Range" operation.
Differential Revision: https://developer.blender.org/D10959
This code was disabled in 2.8 and all other associated code/comments
have been removed/cleared. These rna properties have been replaced with
`seq_prev_type`
Removal of unused local variable. Calculation of underline thickness
no longer needed with change to text output of underscore character.
Introduced in aee04d4960
Differential Revision: https://developer.blender.org/D11641
Currently B-Bone scaling can only be controlled via their
properties, thus requiring up to 8 drivers per joint between
B-Bones to transfer scaling factors from the handle bone.
A Scale Easing option is added to multiply the easing value
by the Y scale channels to synchronize them - this produces a
natural scaling effect where both the shape of the curve and
the scale is affected.
In addition, four toggles are added for each handle, which
multiply each of the X, Y, Z and Ease values by the matching
Local Scale channel of the handle bone, thus replacing trivial
drivers. The Scale Easing option has no effect on this process
since it's easy to just enable both Length and Ease buttons.
Differential Revision: https://developer.blender.org/D9870
Implement actual behavior for the B-Bone Y Scale channels added
to DNA and UI in the previous commit in addition to the existing
X and Z Scale inputs.
The two length scale inputs control the ratio between the lengths
of the start and end segments of the bone: although for convenience
two inputs are provided, the whole chain is still uniformly scaled
to fit the curve.
Differential Revision: https://developer.blender.org/D9870
In addition to the base bone transformation itself, B-Bones have
controls that affect transformation of its segments. For rotation
the features are quite complete, allowing to both reorient the
Bezier handles via properties, and to control them using custom
handle bones. However for scaling there are two deficiencies.
First, there are only X and Y scale factors (actually X and Z),
while lengthwise all segments have the same scaling. The ease
option merely affects the shape of the curve, and does not cause
actual scaling.
Second, scaling can only be controlled via properties, thus
requiring up to 6 drivers per joint between B-Bones to transfer
scaling factors from the handle bone. This is very inefficient.
Finally, the Z channels are confusingly called Y.
This commit adds a B-Bone Y Scale channel and extra B-Bone flag
fields to DNA with appropriate versioning (including for F-Curves
and drivers) in preparation to addressing these limitations.
Functionality is not changed, so the new fields are not used
until the following commits.
Differential Revision: https://developer.blender.org/D9870
When drawing mnemonic underlines for hotkeys, use text output of
underscore character instead of direct drawing a line. Otherwise these
are not visible in dialog buttons.
Introduced in 0fcc063fd9
Differential Revision: https://developer.blender.org/D11641
Reviewed by Campbell Barton
Using an ampersand here is more semantically correct. A slash indicates "or" while an ampersand indicates "and".
An ampersand here is best because the view type shows both the Sequencer and the Preview.
When having multiple materials in a mesh the triangles are sorted based
on material index. This sorting is done single threaded, but needs two
loops over the data. One to count the bucket size and the second one to
add the triangles to the right position in the buckets.
This patch will do the counting in a multithreaded approach that would
speed up the cache creation. It has been measured that this part is the
most blocking part of the cache creation.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11615
During selections the total selection is refreshed at the end. This
process was done single threaded. This patch will do a parallel iter
approach.
Master: 0.043612s Threaded 0.017964s.
Master: {F10179586}
This patch: {F10179587}
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11622
`ED_fileselect_get_asset_params` would only return actual data pointer
when file browser is in ASSET mode.
Calling that whole section only makes sense if filebrowser is in asset
mode anyway.
Regression introduced in rBf6c5af3d4753 I think.
@Severin committing this fix now as this is a fairly critical bug for
the studio, feel free to revert and do proper fix if this one is not the
best solution.
This patch ensures that selection mode flushing updates total selection
counts internally. This reduces recounting when we are sure that the
input total selection counts were up to date.
For example for circle selection the total selection counts were
correct. But during flushing the selection could have been changed and
therefore the selection was always recounted.
This increased the performance on selected system from 6.90 FPS to 8.25
FPS during circle selection operations.
Before: {F10179981}
After: {F10179982}
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11647
When an object, whose mesh gets loaded from Alembic, gets animated in
Blender and the Alembic CacheFile datablock also gets animated, editing
keyframes causes both datablock to be re-copied for evaluation. This
caused a threading issue and a double-free of some memory. This is fixed
by expanding the scope of the spin lock in
`BKE_cachefile_reader_free()`.
Contributed by @erik85 in D11400. The idea from this patch was placed in
a more generic context: A new FOR macro has been added that loops
over the neighbors of a cell within a given radius.
This matches BMesh which also has tessellation in it's own file.
Using a separate file helps with organization when
extracting code into smaller functions.
The //Raycast// node intersects rays from one geometry onto another.
It computes hit points on the target mesh and returns normals, distances
and any surface attribute specified by the user.
A ray starts on each point of the input //Geometry//. Rays continue
in the //Ray Direction// until they either hit the //Target Geometry//
or reach the //Ray Length// limit. If the target is hit, the value of the
//Is Hit// attribute in the output mesh will be true. //Hit Position//,
//Hit Normal//, //Hit Distance// and //Hit Index// are the properties of the
target mesh at the intersection point. In addition, a //Target Attribute//
can be specified that is interpolated at the hit point and the result
stored in //Hit Attribute//.
Docs: D11620
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D11619
This node creates splines with more control points in between the
existing control points. The point is to give the splines more
definition for further tweaking like randomization with white noise,
instead of deforming a resampled poly spline with a noise texture.
For poly splines and NURBS, the node simply interpolates new values
between the existing control points. However, for Bezier splines,
the result follows the existing evaluated shape of the curve, changing
the handle positions and handle types to make that possible.
The number of "cuts" can be controlled by an integer input, or an
attribute can be used. Both spline and point domain attributes are
supported, so the number of cuts can vary using the value from the
point at the start of each segment.
Dynamic curve attributes are interpolated to the result with linear
interpolation.
Differential Revision: https://developer.blender.org/D11421
The minimum twist mode is important because it allows creating
normals without sudden changes in direction. The disadvantage
of minimum twist normals is that the normals depend on all control
points. So changing one control point can change the normals
everywhere. The computed normals do not match the existing
code exactly, although they do match quite well on non-cyclic and
on some cyclic curves. I also noticed that the existing implementation
has some fairly simple failure cases that I haven't found in the new
implementation so far.
Differential Revision: https://developer.blender.org/D11621
This makes the parts where a node is locked more explicit. Also, now the thread
is isolated when the node is locked. This prevents some kinds of deadlocks
(which haven't happened in practice yet).
- BKE_mesh_copy_parameters_for_eval to be used for evaluated meshes only
as it doesn't handle ID user-counts.
- BKE_mesh_copy_parameters is a general function for copying parameters
between meshes.
Refactor function `freeSeqData` so it is readable.
One strip can have multiple transform operations defined. To prevent
processing strip multiple times, build `SeqCollection` and use
sequencer iterator instead of iterating `TransData` directly.
No functional changes.
Differential Revision: https://developer.blender.org/D11618
Reduce complexity of sequencer transform code by removing recursivity.
This is possible by treating meta strips (mostly) as any other strip and
containing all transform code within SEQ_ functions.
Unfortunately internally meta strips still require special treatment,
but all complexity from code all over transform code seems to be
possible to contain within one function.
Functional change:
Previously adjusting handle of single image strip moved animation.
Now animation is not moved, which is behavior for all other strips.
Reviewed By: sergey, mano-wii
Differential Revision: https://developer.blender.org/D11493
Starts scrolling when dragging a node or node link and going outside the current window.
Largely copied from the VIEW2D_OT_edge_pan operator.
Edge panning operator customdata and supporting functions now in
UI_view2d.h, so they could be used by operators in other editor
libraries. The VIEW2D_OT_edge_pan operator also uses this customdata and
shared functions now. Operators properties can be used to configure
edge panning margins and speed for each use case, rather than using
hardcoded values.
The speed function for edge panning has been tweaked somewhat:
* "Speed per pixel" has been replaced with a "speed ramp" distance.
This is more intuitive and also creates an upper bound for the speed,
which can otherwise become extreme with large cursor distance.
* "Max speed" is reached at the end of the speed ramp.
* Padding the region inside and outside is applied as before, but both
values are operator properties now.
Node transform operator also supports edge panning. This requires
an offset for changes in the view2d rect, otherwise nodes are "stuck"
to the original view.
Transform operator had cursor wrapping categorically enabled, but this
gets quite confusing with the edge scrolling mechanism. A new TransInfo
option T_NO_CURSOR_WRAP has been introduced to disable this behavior.
The double negative is a bit annoying, but want to avoid affecting the
existing transform modes, so by default it should still set the
OP_IS_MODAL_GRAB_CURSOR flag (which then sets the WM_CURSOR_WRAP_XY
flag during modal execution).
Reviewed By: HooglyBoogly, JacquesLucke
Differential Revision: https://developer.blender.org/D11073
This allows line art to run only once for each modifier stacks,
with an option to toggle a specific line art modifier should
use cache or re-do their own calculations.
Reviewed By: Sebastian Parborg (zeddb), Hans Goudey (HooglyBoogly)
Differential Revision: https://developer.blender.org/D11291
This makes it easier to use task isolation in c++ code.
Previously, one either had to check `WITH_TBB` (possibly indirectly
through `WITH_OPENVDB`) or one had to use the C function which
is less convenient.
This namespace groups threading related functions/classes. This avoids
adding more threading related stuff to the blender namespace. Also it
makes naming a bit easier, e.g. the c++ version of BLI_task_isolate could
become blender::threading::isolate_task or something similar.
Differential Revision: https://developer.blender.org/D11624
Similar to what we do for constraints and modifiers, except that
currently adding or editing shaderfx in liboverride objects is
completely unsuported.
Fix T88974.
Used to detect if a shaderfx is purely local, or comes from linked data,
in case of a liboverride.
Not actually used yet since we do not currently support adding
shaderfx's to overrides, but will be in the future, and matches
constraints and modifiers code.
Mainly:
* Make `ED_operator_object_active_editable_ex` properly report poll
messages on failure.
* Add `ED_operator_object_active_local_editable_posemode_exclusive` for
bone constraints requiring pure local Object (non-override one).
* General cleanup and adding more poll messages on failures.
On selecting a multi-layer image with a combined pass, a "Combined"
socket is created and default combined pass socket "Image" is
disabled by setting `SOCK_UNAVAIL` flag. When converting into
operations, `ImageNode` converts alpha socket on finding any socket with
a combined pass without checking the flag.
Since commit rB93e2491ee724 an assertion fails when mapping sockets
twice because now map `add_new` is used.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11566
Adds full frame implementation to Value node operation.
No functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11594
This adds support for importing UV sets which are defined per vertex,
instead of per face corners. Such UV sets can be generated when the
mesh is split according to UV islands, or when there is only one UV
island, in which cases only a single UV value can be stored per
vertex since vertices will never be on a seam.
- Include all objects in pose mode.
- Show the number of objects in pose mode.
- Show the number of objects in edit mode for all types of objects
(not just meshes).
This adds support for importing UV sets which are defined per vertex,
instead of per face corners. Such UV sets can be generated when the
mesh is split according to UV islands, or when there is only one UV
island, in which cases only a single UV value can be stored per
vertex since vertices will never be on a seam.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D11584
Implementation of T86970. This node takes a geometry input with
multiple components and outputs them by component type. Meshes,
Curves, and Point Clouds support combining multiple input instances,
while volumes will only output the first volume component input until
suitable instance realization for multiple volumes is finished.
When direct geometry instancing is implemented it will be possible to
avoid realizing instances in this node.
Differential Revision: https://developer.blender.org/D11577
Creating a new full screen area had it's area initialized as empty,
updating the screen then set the area to a 3D view (as a fallback),
before the actual area type was set.
This made setting the intended space-type run the 3D views exit callback
on a 3D view without a View3D struct allocated, which the exit callback
needed to account for.
Resolve by calling ED_screen_change after the area type has been set.
This patch improves the 3DView statistics overlay to show LOCAL stats
while in local view. This means the stats can vary between 3DViews and
the statusbar when views are in local view, but this gives a much more
accurate count of the objects, and their components, that you are
directly working with rather than just scene values.
Differential Revision: https://developer.blender.org/D8883
Reviewed by Campbell Barton
Versioning code for converting strip offset property doesn't work, when
property was animated and disabled or when crop was used.
When offset property is animated and offset is enabled, animation is
converted to be used with new transform design. When offset is disabled,
animation is left untouched. New transform design doesn't have option
to disable offset, and therefore old unconverted animation is used
instead of converted static value.
Remove animation from propery if it was unused.
Another issue was that both X and Y offset animation was being corrected
by factor caluclated for X channel.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11370
Use lookup string callback function for `sequences_all` RNA property
`rna_SequenceEditor_sequences_all_lookup_string` using a GHash for faster lookups.
When names are changed or strips are added/removed the lookup is tagged invalid.
The next time the lookup is used it will rebuild it.
Reviewed By: sergey, jbakker
Differential Revision: https://developer.blender.org/D11544
Just like the way we often have a choice between an attribute input and
a single float, this adds the ability to choose between attribute and
integer input sockets, useful for D11421.
There is no particular reason these two functions shouldn't be used
outside of the bezier spline implementation since they don't do anything
particularly controversial.
Create maps that specify which batches have vbo or ibo as a reference
and use these maps to discard batches along with buffers.
Differential Revision: https://developer.blender.org/D11588
Adds `source/blender/blendloader/intern/versioning_common.cc` and
`versioning_common.h` for version independent versioning functions.
I only placed `do_versions_add_region_if_not_found()` in there for now.
`blo_do_version_old_trackto_to_constraints()` could also be added, but
that's so old, I prefer keeping that in `versioning_legacy.c`.
Widget drawing code already supported drawing right-aligned, grayed out
shortcut strings. This patch generalizes things a bit so this can also
be used to draw other hints in the same way. There have been a few
instances in the past where this would've been useful, D11046 being the
latest one.
Note that besides some manual regression testing, I didn't check if this
works yet, as there is no code actually using it (other than the
shortcuts). Can be checked as part of further development for D11046.
A possible further improvement would be providing a way to define how
clipping should be done. E.g. sometimes the right-aligned text should be
clipped first (because it's just a hint), in other cases it should be
left untouched (like current code explicitly does it for shortcuts).
Removes the `UI_BUT_HAS_SHORTCUT` flag, which isn't needed anymore.
After looking into task isolation issues with Sergey, we couldn't find the
reason behind the deadlocks that we are getting in T87938 and a Sprite Fright
file involving motion blur renders.
There is no apparent place where we adding or waiting on tasks in a task group
from different isolation regions, which is what is known to cause problems. Yet
it still hangs. Either we do not understand some limitation of TBB isolation,
or there is a bug in TBB, but we could not figure it out.
Instead the idea is to use isolation only where we know we need it: when
holding a mutex lock and then doing some multithreaded operation within that
locked region. Three places where we do this now:
* Generated images
* Cached BVH tree building
* OpenVDB lazy grid loading
Compared to the more automatic approach previously used, there is the downside
that it is easy to miss places where we need isolation. Yet doing it more
automatically is also causing unexpected issue and bugs that we found no
solution for, so this seems better.
Patch implemented by Sergey and me.
Differential Revision: https://developer.blender.org/D11603
When using multiple materials in a single mesh the most time is spend in
counting the offsets of each material for the sorting.
This patch moves the counting of the offsets to render mesh data and
caches it as long as the geometry doesn't change.
This patch doesn't include multithreading of this code.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11612
Clear the runtime data structs instead of individual members,
this simplifies adding new runtime members as there are at least
two places they would need to be cleared.
Resolves error in D8883.
This commit lets the join geometry node transfer dynamic attributes
to the result, the same way that point cloud and mesh attributes are
joined. The implementation is different though, because of an
optimization implemented for curves to avoid copying splines.
The result attribute is added with the highest priority domain (points
over splines), and the highest complexity data type. If one curve had
the attribute on the spline domain but not others, the point domain
values will be used.
Generally this is a bit lower level than I would have liked this code
to be, but should be efficient, and it's really not too complicated.
Differential Revision: https://developer.blender.org/D11491
Instead of building a set and then determining the final domain and
type for every attribute separately in the loop, construct a map with
the necessary data in the first place. This is simpler and should be
slightly more efficient.
Split from D11491
This is an implementation of T88722. It accepts a curve object and
for each spline, reverses the order of the points and all attributes.
This is more of a foundational node to support other nodes in the
future (like curve deform)
Selection takes spline domain attributes to determine which splines
are selected. If no selection is present all splines are reversed.
Differential Revision: https://developer.blender.org/D11538
This node implements the second option of T87429, creating points
along the input splines with the necessary evaluated information
for instancing: `tangent`, `normal`, and `rotation` attributes.
All generic curve point and spline attributes are copied to the
result points as well.
The "Count" and "Length" methods are just like the current options
in the resample node, but the output is points instead of a curve.
The "Evaluated" method uses the points you see on the curve directly,
and therefore should be the fastest.
The rotation data is retrieved from a transform matrix built with the
same method that the curve to mesh node uses. The radius attribute is
divided by 10 so the points don't look absurdly huge in the viewport.
In the future that could be an option.
For the implementation, one thing that could use an improvement
is the amount of temporary allocations while resampling to evaluated
points before the final points. I expect that reusing a buffer for
each thread would give a nice improvement.
Differential Revision: https://developer.blender.org/D11539
This patch allows Windows users to specify that their current blender
installation should be used to create thumbnails and be associated
with ".blend" files. This is done from Preferences / System. The only
way to do this currently is from the command-line and this is sometimes
inconvenient.
Differential Revision: https://developer.blender.org/D10887
Reviewed by Brecht Van Lommel
If the last decoded frame had the same timestamp as the GOP current
packet, then we would skip over this frame when fast forwarding and we
would seek until the end of the file.
This would could only be triggered reliably in single threaded mode.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11601
The warning would appear when using the `ENUM_OPERATORS()` macro inside
of an `extern "C"` block.
Didn't cause a warning in master currently, but in the
`asset-browser-poselib` branch.
After macro expansion, there would be C++ code in code with C linkage
(`extern "C"`). So make sure the expanded C++ code always uses C++
linkage.
The syntax used is totally C++ compliant: the C++ standard requires that
in such nested linkage specifications, the innermost one determines the
linking language (e.g. see
https://timsong-cpp.github.io/cppwp/n4659/dcl.link#4).
On the Windows platform there will be some errors printed to the
console if the user's thumbnail cache folder doesn't already exist.
While creating those folders there is an attempt to do so multiple
times and so we get errors when trying to create when exists. This
is caused by paths that have hard-coded forward slashes, which causes
our path processing routines to not work correctly. This patch defines
those paths using platform-varying separator characters.
Differential Revision: https://developer.blender.org/D11505
Reviewed by Brecht Van Lommel
Support calculating face normals when tessellating. When this is done
before updating vertex normals it gives ~20% performance improvement.
Now vertex normal calculation only needs to perform a single pass on the
mesh vertices when called after tessellation.
Extended versions of normal & looptri update functions have been added:
- BM_mesh_calc_tessellation_ex
- BM_mesh_normals_update_ex
Most callers don't need to be aware of this detail by using:
- BKE_editmesh_looptri_and_normals_calc
- BKE_editmesh_looptri_and_normals_calc_with_partial
- EDBM_update also takes advantage of this,
where calling EDBM_update with calc_looptri & calc_normals
enabled uses the faster normal updating logic.
Bypass stored edge-vectors for ~16% performance gains.
While this increases unit-length edge-vector calculations by around ~4x
the overhead of a parallel loop over all edges makes it worthwhile.
Note that caching edge-vectors per-vertex performs better and may be
worth investigating further, although in my tests this increases code
complexity with barley measurable benefits over not using cache at all.
Details about performance and possible optimizations are noted in
bm_vert_calc_normals_impl.
Rename function EDBM_update_generic to EDBM_update, use a parameters
argument for better readability.
Also add calc_normals argument, which will have benefits when
calculating normals and tessellation together is optimized.
For some custom rendering engines it's advantageous not to write the image files to disk.
An example would be a network rendering engine which does it's own image writing.
This feature is only supported when bl_use_postprocess is also disabled, since render
engines can't influence the saving behavior of the sequencer or compositor.
Differential Revision: https://developer.blender.org/D11512
Better to avoid explicit vectors components direct manipulation when a
generic operation for whole vector exists, if nothing else it avoids
potential mistakes in indices.
Those were caused by various tools used on degenerate geometry, see
T79775.
Note that fixes are as low-level as possible, to ensure they cover as
much as possible of unreported issues too.
We still probably have many more of those hidden in BLI_math though.
This commit does two things:
* Disallows creating more than one link from one socket to a multi socket input.
* Properly count links if there happen to be more than one link between the same sockets.
The new link counting should also be more efficient asymptotically.
Differential Revision: https://developer.blender.org/D11570
- The argument with named with an `r_` prefix when it was in fact
also read from.
- The argument passed in had to be 'psys->clmd->hairdata',
if it was not - the function would not worked.
When moving a linked collection, we seem to only receive a depsgraph update
for an empty object so the Blender synchronization cannot discriminate it
and tag the object(s) (light or geometry) for an update through
id_map.set_recalc.
This missing transform update only affects lights since we do not check
manually if the transformations were modified like we do for objects.
To fix this, add a check to see if the transformation is different provided
that a light was already created.
Reviewed By: brecht
Maniphest Tasks: T88515
Differential Revision: https://developer.blender.org/D11574
This patch improves the positioning of child windows when on monitors
that are arranged vertically (any above any other). When calculating a
window position in Ghost coordinates from GL coordinates we were using
monitor height, which can give incorrect values when desktop is taller
than any single monitor. So use desktop height instead.
See D10637 for more details and examples.
Differential Revision: https://developer.blender.org/D10637
Reviewed by Brecht Van Lommel
This patch makes the "Render" window a top-level window, not a child of
the main window, which was the case in blender versions prior to 2.93.
This means it is no longer "on top", nor is the icon grouped on the
taskbar in the same way, but you can Alt-Tab between it and the main
window. This change only affects the Windows platform as the other
platforms behave this way.
See D11576 for links to negative feedback that prompts this change.
Differential Revision: https://developer.blender.org/D11576
Reviewed by Brecht Van Lommel
This moves the flash on mode transfer effect option from the overlays to
an operator property of the mode transfer operator.
- This effect is intended to show the target object when no overlays or
a minimal set of overlays is enabled. Making it part of the whole set of
overlays invalidates this use case.
- The effect is not intended to be configurable per viewport, it should
be a global option.
The effect is still implemented using the overlay engine (instead of a
draw modal callback) due to performance and drawing artifacts. Having it
implemented as an overlay with runtime timer data in the objects makes
also possible to run multiple animations at the same time without any
visual glitches.
Reviewed By: campbellbarton, JulienKaspar
Differential Revision: https://developer.blender.org/D11519
Note: Linking in this case as in link vs. append. Easily confused with linking
a data-block to multiple usages (e.g. single material used by multiple
objects).
Adds a drop-down to the Asset Browser header to choose between Link and Append.
This is probably gonna be a temporary place, T54642 shows where this could be
placed eventually.
Linking support is crucial for usage of the asset browser in production
environments. It just wasn't enabled yet because a) the asset project currently
focuses on single user, not production assets, and b) because there were many
unkowns still for the workflow that have big impact on production use as well.
With the recently held asset workshop I'm more confident with enabling linking,
as design ideas relevant to production use were confirmed.
Differential Revision: https://developer.blender.org/D11536
Reviewed by: Bastien Montagne
The operator run when dropping objects would duplicate the dropped object and
place that in the scene, even though that was just appended. Addressed by
making the duplication optional for the operator. If the duplication is not
requested, the object is just added to the scene (if needed), repositioned
based on the drop location and selected (deselecting other objects).
This makes the operator work as expected when using it to drop assets.
Reviewed as part of https://developer.blender.org/D11536.
Reviewed by: Bastien Montagne
Fix segmentation fault that can occur when reordering animation
channels.
Under some specific conditions, the list "act->curves" is empty in the
"join_groups_action_temp" function. In particular, this happens when a
scene contains an action that has not been pushed down, and with no
keyframe in it.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D11569
While this preprocessing does take some time upfront,
it avoids longer lookup later on, especially as nodes get
more sockets.
It's probably possible to make this more efficient in some cases
but this is good enough for now.
Scanline processor did its own heurestic what didn't scale well when
having a multiple cores. In stead of using our own code this patch will
leave it to TBB to determine how to split the scanlines over the
available threads.
Performance of the IMB_transform before this change was 0.002123s, with
this change 0.001601s. This change increases performance in other areas
as well including color management conversions.
Reviewed By: zeddb
Differential Revision: https://developer.blender.org/D11578
When using large sequences including audio the drawing of the audio on
top of the strip takes a lot of time. This effects the playback
performance heavily.
During the animation playback performance there was a solution for this
by only drawing the playhead overlay. This was reverted for the sequence
editor as it didn't update the color strips when they were animated.
This patch checks if there are animated color strips if so the full
screen is redrawn, otherwise only the playhead is redrawn.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D11580
One drawback to trying to predict the number of threads that will be
used in the `task_graph` is that we are only sure of the number when the
threads are running.
Using `BLI_task_parallel_range` allows the driver to
choose the best thread distribution through `parallel_reduce`.
The benefit is most evident on hardware with fewer cores.
This is the result on an 4-core laptop:
||before:|after:
|---|---|---|
|large_mesh_editing:|Average: 5.203638 FPS|Average: 5.398925 FPS
||rdata 15ms iter 43ms (frame 193ms)|rdata 14ms iter 36ms (frame 187ms)
Differential Revision: https://developer.blender.org/D11558
This is an adaptation of {D11488}.
A disadvantage of manually setting the iter ranges per thread is that
we don't know how many threads are running in the background and so we
don't know how to best distribute the ranges.
To solve this limitation we can use `parallel_reduce` and thus let the
driver choose the best distribution of ranges among the threads.
This proved to be especially beneficial for computers with few cores.
**Benchmarking:**
Here's the result on an 4-core laptop:
||master:|PATCH:
|---|---|---|
|large_mesh_editing:|Average: 5.203638 FPS|Average: 5.398925 FPS
||rdata 15ms iter 43ms (frame 193ms)|rdata 14ms iter 36ms (frame 187ms)
Here's the result on an 8-core PC:
||master:|PATCH:
|---|---|---|
|large_mesh_editing:|Average: 15.267482 FPS|Average: 15.906881 FPS
||rdata 9ms iter 28ms (frame 65ms)|rdata 9ms iter 25ms (frame 63ms)
|large_mesh_editing_ledge: |Average: 15.145966 FPS|Average: 15.520474 FPS
||rdata 9ms iter 29ms (frame 65ms)|rdata 9ms iter 25ms (frame 64ms)
|looptris_test:|Average: 4.001917 FPS|Average: 4.061105 FPS
||rdata 12ms iter 90ms (frame 236ms)|rdata 12ms iter 87ms (frame 230ms)
|subdiv_mesh_cage_and_final:|Average: 1.917769 FPS|Average: 1.971790 FPS
||rdata 7ms iter 37ms (frame 261ms)|rdata 7ms iter 31ms (frame 258ms)
||rdata 7ms iter 38ms (frame 252ms)|rdata 7ms iter 33ms (frame 249ms)
|subdiv_mesh_final_only:|Average: 6.387240 FPS|Average: 6.591251 FPS
||rdata 3ms iter 25ms (frame 151ms)|rdata 3ms iter 16ms (frame 145ms)
|subdiv_mesh_final_only_ledge:|Average: 6.247393 FPS|Average: 6.596024 FPS
||rdata 3ms iter 26ms (frame 158ms)|rdata 3ms iter 16ms (frame 148ms)
**Notes:**
- The improvement can only be noticed if all extracts are multithreaded.
- This patch touches different areas of the code, so it can be split into another patch if the idea is accepted.
These screenshots show how threads behave in a quadcore:
Master:
{F10164664}
Patch:
{F10164666}
Differential Revision: https://developer.blender.org/D11558
ffmpeg_generic_seek_workaround did work properly and our start pts
calculation was wrong.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11562
Because of the added sanity checks in rB14508ef100c9 (D11492), seeking
in proxies would not work correctly any more. This is because it wasn't
working as intended before, but in most cases this wouldn't be
noticeable. However now when the sanity checks are tripped it is very
noticeable that something is wrong
The indexer tried to use dts values for time stamps when we used pts in
our decode functions to get the time positions. This would make it
start in the wrong GOP frames when searching. Now that we enforce no
crossing of GOP frames when decoding after seek, this would lead to
issues.
Now we correctly use pts (or dts if pts is not available) and thus we
don't have any seeking issues because of time stamp format missmatch.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11561
When sampling ImBuf can be a char or a float buffer. Current sampling
functions added overhead by checking which kind of buffer was passed
every pixel that was sampled. When performing image processing this
check can be removed outside the inner loop adding 5% of performance
increase in the `IMB_transform` operator.
Remap {key Alt I} from `anim.delete_key_v3d` to `anim.delete_key`. This
makes it keyframe removal symmetrical with keyframe insertion ({key I}).
Both the default keymap {key Alt I} and the Industry Compatible keymap
{key Alt S} have been updated.
Reviewed By: sybren, #animation_rigging
Maniphest Tasks: T88068
Differential Revision: https://developer.blender.org/D11528
Inside the sequencer the cropping and transform of images/buffers were
implemented locally. This reduced the optimizations that a compiler
could do and added confusing code styles. This patch adds
`IMB_transform` to reduce the confusion and increases compiler
optimizations as more code can be inlined and we can keep track of
indices inside the inner loop.
This increases end-user performance by 30% when playing back aa video
in VSE.
Reviewed By: ISS, zeddb
Differential Revision: https://developer.blender.org/D11549
This patch changes occurrences of percentage to factor.
There are some usages of percentage left in there on purpose.
They are distinguished as follows:
- factor is 0-1 float
- percentage is 0-100 int
Ref D11361
Reviewed by: sybren, campbellbarton
Prepare node for conversion to Geometry Nodes.
There should be no functional changes.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D11506
When using non-default system separator in filename path, code would end up
with an absolute path mixing regular and alternative separator,
confusing the rest of the path manipulations later on.
So this commit add proper replacements of alternative separators, and
path normalization.
Splitting out thread safe iteration logic means regular iteration
isn't checking for the thread-safe pointer each step.
This gives a small but measurable overall performance gain of 2-3%
when redrawing a high-poly mesh.
Ref D11564
Reviewed By: mont29
This change was prompted by D6408 which moves thumbnail extraction into
a shared function that happens use these endian defines but only links
blenlib.
There is no need for these defines to be associated with globals
so move into their own header.
Allows to define properties which will have proper units displayed
in the interface. The internal storage is expected to be seconds
(which matches how other times are stored in Blender).
Is not immediately used in Blender, but is required for the upcoming
feature in Cycles X (D11526)
The naming does not sound very exciting, but can't think of anything
better either.
For test it probably easiest to define FloatProperty with subdtype
of TIME_ABSOLUTE.
Differential Revision: https://developer.blender.org/D11532
Previously, a vertex from destination mesh would always be added to all
transferred vgroup (with a 0.0 weight), even if none of its matching
sources in source mesh belonged to the matching source vgroups.
Now a destination vertex is only added to a given destination vgroup if
at least one of its source vertices belong to the matching source
vgroup.
Issue found and initial investigation by @pls in D11524, thanks!
Doxygen by default leaves out any functions inside
#ifdef blocks that it thinks are disabled.
This change adds a DOXYGEN symbol, so you can
still get the functions included in the
documentation even if the #ifdef would
have normally excluded them.
before
#if defined(_WIN32)
after
#if defined(_WIN32) || defined(DOXYGEN)
Patch provided by Campbell Barton on chat.
TBBmalloc_proxy already takes care of any allocations
being done from MSVC compiled code, some of the dependencies
like GMP cannot be build with MSVC and we have to use
mingw to build them. mingw however links against the older
msvcrt.dll for its allocation needs, which TBBMallocProxy
does not hook.
GMP has an option to supply your own allocation functions
so we can still manually redirect them to TBBMalloc.
In a test-file with a boolean geometry node, this patch
uses 32s effective CPU time compared to 52s before.
Differential Revision: https://developer.blender.org/D11435
Reviewed by Campbell Barton, Ray Molenkamp
Remove an unnecessary call to pose_slide_mouse_update_percentage
That call was overriding the typed value
Reviewed By: #animation_rigging, Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D11395
Ref D11395
To draw the overlay stats in columns the strings must be measured to
find the longest one. In some circumstances this measurement can be
incorrect. We draw the text with a specific size yet do not explicitly
set the size before calling BLF_size. This patch properly sets the size
so that the measurement will match what will be used for output.
See T88799 for examples of measurement failure.
Differential Revision: https://developer.blender.org/D11504
Reviewed by Hans Goudey
First, expand on the interpolation to evaluated points with a templated
helper function, and a function that takes a GSPan. Next, add a set of
functions to `Spline` for interpolating at arbitrary intervals between
the evaluated points. The code for doing that isn't that complicated
anyway, but it's nice to avoid repeating, and it might make it easier
to unroll the special cases for the first and last points if we require
the index factors to be sorted.
This commit adds a node to output the convex hull of any input geometry
as a mesh, which is an enclosing geometry around a set of points.
All geometry types are supported, besides volumes.
The code supports operating on instances to avoid copying all input
geometry before the operation. The implementation uses the same backend
as the operation in edit mode, but uses Mesh directly instead of BMesh.
Attribute transfer is not supported currently, but would be a point of
improvement for the future if it can work in a predictable way on
different geometry input types.
Differential Revision: https://developer.blender.org/D10925
Note that these changes are limited simple cases as these kinds of
changes could allow for errors when refactoring code when the known
state is not so obvious.
Use BM_iter_parallel for face tessellation, this gives around
6.5x speedup for BM_mesh_calc_tessellation on high poly meshes in my
tests, although exact speedup depends on available cores.
Support thread local storage for BLI_task_parallel_mempool,
as well as support for the reduce and free callbacks.
mempool_iter_threadsafe_* functions have been moved into a private
header thats only shared between task_iterator.c and BLI_mempool.c
so the TLS can be made part of the iterator array without having to
rely on passing in struct offsets.
Add test task.MempoolIterTLS that ensures reduce and free
are working as expected.
Reviewed By: mont29
Ref D11548
Also modified existing utility functions to take
care of the new surface normal interpolation and so on.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D11543
While this should not be allowed in general, there are some cases
(library overrides at least) where supporting this is mandatory.
Further more, comment stating that this could crash is from 2011, could
not reproduce any issue with current code. Commit comment was referring
to undo/redo, but in use cases here those should not affect things.
Note that in general, such relatively high-level checks should be
handled by high-level, close to user code (like in ED area e.g.), not in
low-level BKE code anyway.
This patch adds a specific extraction method when the mesh has only
one material. This method is multi-threaded.
There is a trade-off in this patch as the ibo isn't compressed (it adds
restart indexes for hidden faces). So it depends if threading is faster
than the additional GPU buffer upload.
# Subdivided cube
I used a cube subdivided 7 times, modifiers applied. that gives around 400000 faces.
The test is selecting some vertices and move them. During this test the next buffers are updated on each frame:
* vbo.pos_nor
* vbo.lnor
* vbo.edit_data
* ibo.tris
* ibo.points
System info:
|platform| Linux-5.11.0-7614-generic-x86_64-with-glibc2.33|
| renderer| AMD SIENNA_CICHLID (DRM 3.40.0, 5.11.0-7614-generic, LLVM 11.0.1)|
|vendor| AMD|
|version| 4.6 (Core Profile) Mesa 21.0.1|
|cpu| Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz|
|compiler| gcc version 10.3.0|
Timing have been measured using DEBUG_TIME in `draw_cache_extract_mesh`.
master: `rdata 8ms iter 45ms (frame 153ms)`
this patch `rdata 6ms iter 36ms (frame 132ms)`
Reviewed By: mano-wii
Maniphest Tasks: T88352
Differential Revision: https://developer.blender.org/D11290
This commit adds a flag to disable displaying some socket labels which
just redundant eye sores. We still want to have a label, because that
information can potentially be accessed elsewhere in the UI.
The flag is used in a few geometry nodes.
Differential Revision: https://developer.blender.org/D11540
This is an optimization, but the difference is still not that
significant as some extractions are still done in single thread.
**Benchmarking**
||before:|after:
|---|---|---|
|large_mesh_editing:|Average: 14.246502 FPS|Average: 15.438118 FPS
||rdata 9ms iter 31ms (frame 69ms)|rdata 9ms iter 27ms (frame 65ms)
|large_mesh_editing_ledge: |Average: 14.913622 FPS|Average: 15.856538 FPS
||rdata 9ms iter 30ms (frame 67ms)|rdata 9ms iter 26ms (frame 63ms)
|looptris_test:|Average: 3.970774 FPS|Average: 4.095200 FPS
||rdata 11ms iter 90ms (frame 235ms)|rdata 12ms iter 87ms (frame 229ms)
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11467
A single threaded task with thread data over 8192 bytes would leak.
While this didn't happen in practice, it could cause issues in the
future.
The free call for `task_parallel_iterator_do` wasn't running
if callbacks weren't set, also not an issue in practice but avoids
potential problems in the future too.
Changes introduced in commit rBe9f2f17e8518
can create different render results when there is
a Math or Mix operation after TextureOperation
on tiled execution model.
This is due to WriteBufferOperation forcing a single pixel
resolution when these operations use a preferred
resolution of 0 to check if their inputs have resolution.
Fixing this behaviour creates different renders too.
This patch keeps previous tiled implementation and
adds the new implementation only for full frame execution.
Reviewed By: Jeroen Bakker (jbakker)
Differential Revision: https://developer.blender.org/D11546
In order to reduce stack size this patch converts full frame
recursive methods into iterative.
- No functional changes.
- No performance changes.
- Memory peak may slightly vary depending on the tree because
now breadth-first traversal is used instead of depth-first.
Tests in D11113 have same results except for test1 memory peak:
360MBs instead of 329.50MBs.
Reviewed By: Jeroen Bakker (jbakker)
Differential Revision: https://developer.blender.org/D11515
CMake builder and install deps changes, precompiled libraries are still to be
committed.
Ref T88438, T88434
Differential Revision: https://developer.blender.org/D11486
During transforming an image, a matrix multiplication per pixel was done.
The matrix in itself is always linear so it could be replaced by two additions.
During testing in debug builds playing back a movie went from 20fps to
300 fps.
Reviewed By: zeddb
Differential Revision: https://developer.blender.org/D11533
Talked with Bastien and we ended up looking into this. Issue is that the
dupliation through drag & drop should also be considered a
"sub-process", like Shift+D duplicating does. Added a comment explaining
why this is needed.
Current index builder is designed to be used in a single thread.
This makes all index buffer extractions single threaded.
This patch adds a thread safe solution enabling multithreaded
building of index buffers.
To reduce locking the solution would provide a task/thread local
index buffer builder (called sub builder).
When a thread is finished this thread local index buffer builder
can be joined with the initial index buffer builder.
`GPU_indexbuf_subbuilder_init`: Initialized a sub builder. The
index list is shared between the parent and sub buffer, but the
counters are localized. Ensuring that updating counters would
not need any locking.
`GPU_indexbuf_subbuilder_finish`: merge the information of the
sub builder back to the parent builder. Needs to be invoked outside
the worker thread, or when sure that all worker threads have been
finished. Internal the function is not thread safe.
For testing purposes the extract_points extractor has been migrated to
the new API. Herefore changes to the mesh extractor were needed.
* When creating tasks, the task number of current task is stored in
ExtractTaskData including the total number of tasks.
* Adding two functions in `MeshExtract`.
** `task_init` will initialize the task specific userdata.
** `task_finish` should merge back the task specific userdata back.
* adding task_id parameter to the iteration functions so they can
access the correct task data without any need for locking.
There is no noticeable change in end user performance.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11499
This node creates a boolean face attribute that is "true" for
every face that has the given material.
Differential Revision: https://developer.blender.org/D11324
Selection of an FCurve with box/circle select now selects the entire
curve and all its keys:
- Box selecting a curve selects all the keyframes of the curve.
- Ctrl + box selecting of the curve deselects all the keyframes of the
curve.
- Shift + box selecting of the curve extends the keyframe selection,
adding all the keyframes of the curves that were just selected to the
selection.
- In all cases, if the selection area contains a key, nothing is
performed on the curves themselves (the action only impacts the
selected keys).
Reviewed By: sybren, #animation_rigging
Differential Revision: https://developer.blender.org/D11181
Some of the primitive nodes can return null in an error condition.
This is confusing mixed with adding a maderial slot in calling
functions. This is the second crash caused by that confusion. It's
simpler to add the slot right when allocating the mesh, and it will
lend itself better to copy & paste coding in the future.
Differential Revision: https://developer.blender.org/D11530
Under some circumstances using task isolation can cause deadlocks.
Previously, our task pool implementation would run all tasks in an
isolated region. Now using task isolation is optional and can be
turned on/off for individual task pools.
Task pools that spawn new tasks recursively should never enable
task isolation. There is a new check that finds these cases at runtime.
Right now this check is disabled, so that this commit is a pure refactor.
It will be enabled in an upcoming commit.
This fixes T88598.
Differential Revision: https://developer.blender.org/D11415
Simplify vertex normal calculation by moving the main normal
accumulation function to operate on vertices instead of faces.
Using faces had the down side that it needed to zero, accumulate and
normalize the vertex normals in 3 separate passes, accumulating also
needed a spin-lock for thread since the face would write it's normal
to all of it's vertices which could be shared with other faces.
Now a single loop over vertices is performed without locking.
This gives 5-6% speedup calculating all normals.
This also simplifies partial updates, fixing a problem where
all connected faces were being read from when calculating normals.
While this could have been resolved separately,
it's simpler to operate on vertices directly.
Move BMesh conversion and all loading code into worker.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D11288
ChildWindowFromPoint retrieves the child of the provided window at a
point. In this case it always returns 0 because HWND_DESKTOP is flag
defined as 0, which is never a valid window handle and is not intended
for use in place of a window handle.
Forwarding of mousewheel events was added in adb08def61, and later
modified to the current unworking state in e9645806f5. Sending mouse
wheel events to the window under the cursor is a system preference and
therefore should not be overridden by Blender, therefore the noop code
has been removed.
Added a new api function to stich multires grids
on specific faces in a mesh,
subdiv_ccg_average_faces_boundaries_and_corners,
and changed multires normal calc to use it.
VTune profiling showed that this was a major
performance hit once you get above 10,000 or so
base mesh faces and/or have a high number of
subdivision levels.
Here's a video comparing the difference. Note the
bpy.app_debug switch is not in the final commit.
{F10145323}
And the .blend file:
{F10145346}
Reviewed By: Sergey Sharybin (sergey)
Differential Revision:
https://developer.blender.org/D11334
Added a new api function to stich multires grids
on specific faces in a mesh,
subdiv_ccg_average_faces_boundaries_and_corners,
and changed multires normal calc to use it.
VTune profiling showed that this was a major
performance hit once you get above 10,000 or so
base mesh faces and/or have a high number of
subdivision levels.
Here's a video comparing the difference. Note the
bpy.app_debug switch is not in the final commit.
{F10145323}
And the .blend file:
{F10145346}
Reviewed By: Sergey Sharybin (sergey)
Differential Revision:
https://developer.blender.org/D11334
Also use Curve as an argument instead of Object, since the object was
only used to retrieve the curve, and the calling code is already working
with curve data.
Some of the comments referenced code that was no longer there, or even
defines that were removed. Other comments were more confusing and
vague than helpful. Also adjust formatting in a few cases.
This patch improves the positioning of the little mnemonic underlines
shown under some hotkey letters in menus, especially when using custom
fonts.
see D11521 for details and examples.
Differential Revision: https://developer.blender.org/D11521
Reviewed by Campbell Barton
This revert went too far, only one line (the minimal version of FFMPEG
for `install_deps.sh` script`) actually needed to be reverted...
Sorry for the noise.
No functional changes as logic elsewhere already ensured this.
This just makes it obvious to anyone reading over the code that
these arguments are keyword only.
FOV was expanded to cover the shifting range,
rather than to precisely cut at the image border. Now fixed.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D11523
Moving the bounds code to the builder can be useful
for future optimizations like building multithreaded.
Reviewed By: fclem, jbakker
Differential Revision: https://developer.blender.org/D11455
Several mistakes fixed: Blender's axes convention was wrongly stated;
the mat3_from_axis_conversion in C returns a transposed matrix,
probably because it was copied from Python; the axis transformation
wasn't properly applied to the location part of an object transform.
Small bug that's causing edge count to be incorrect in
final culled list, just being offset exactly 1 entry.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D11513
This field was used for extend feature to get handle position of
metastrip children. Since D9972 extend feature works only on meta
strip itself, not it's children.
So `SEQ_transform_get_left_handle_frame()` second argument is always
false and can be removed.
Another instance of `seq->tmp usage` is hack to distinguish strips to be
shuffled, which is not covered by this patch.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D10321
Use bounding box tests quickly tell that two components cannot
have a containment relation between each other. This change
cut about 0.6s off a test with 25 big icospheres.
Add a call to orthogonalize the matrix before processing for the
same reasons as D8915, and an early exit in case no limits are
enabled for a bit of extra efficiency.
Since the constraint goes through Euler decomposition, it would
in fact remove shear even before this change, but the resulting
rotation won't make much sense.
This change allows using the constraint without any enabled limits
purely for the purpose of efficiently removing shear.
Differential Revision: https://developer.blender.org/D9626
Since Limit Rotation is based on Euler decomposition, it should allow
specifying the order to use for the same reasons as Copy Rotation does,
namely, if the bone uses Quaternion rotation for its animation channels,
there is no way to choose the order for the constraint.
Ref D9626
Fixed the logic for seeking in ffmpeg video files.
The main fix is that we now apply a small offset in ffmpeg_get_seek_pos
to make sure we don't get the frame in front of the seek position when
seeking backward.
The rest of the changes is general cleanup and untangling code.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11492
Due to the way we ship the CRT on windows TBB's
malloc proxy was unable to attach it self to
the memory management functions on windows 10.
This change moves ucrtbase.dll out of the blender.crt
folder and back into the main blender folder to side
step some undesirable behaviour on win10 making TBB
once more able to attach it self.
Having this work again, should give a speed
boost in memory allocation heavy workloads
such as mantaflow.
For details on how this only failed on Win10
see T88813
This patch exposes functionality for performing partial mesh updates
for normal calculation and face tessellation while transforming a mesh.
The partial update data only needs to be generated once,
afterwards the cached connectivity information can be reused
(with the exception of changing proportional editing radius).
Currently this is only used for transform, in the future it could be
used for other operators as well as the transform panel.
The best-case overall speedup while transforming geometry is about
1.45x since the time to update a small number of normals and faces is
negligible.
For an additional speedup partial face tessellation is multi-threaded,
this gives ~15x speedup on my system (timing tessellation alone).
Exact results depend on the number of CPU cores available.
Ref D11494
Reviewed By: mano-wii
Cycles, Eevee, OSL, Geo, Attribute
This operator provides consistency with the standard math node. Allows users to use a single node instead of two nodes for this common operation.
Reviewed By: HooglyBoogly, brecht
Differential Revision: https://developer.blender.org/D10808
rB847579b42250 updated the TBB build script
which had some unintended consequences for
windows as the directory layout slightly
changed.
This change adjusts the builder to the new
structure, there are no version/functional
changes.
When changing to another texture paint slot, the texture displayed in
the viewport should change accordingly (as well as the image displayed
in the Image Editor).
The procedure to find the texture to display in the viewport
(BKE_texpaint_slot_material_find_node) could fail
though because it assumed iterating nodes would always happen in the
same order (it was index based). This is not the case though, nodes can
get sorted differently based on selection (see ED_node_sort).
Now check the actual image being referenced in the paint slot for
comparison.
ref T88788 (probably enough to call this a fix, the other issue(s)
mentioned in the report are more likely a feature request)
Reviewed By: mano-wii
Maniphest Tasks: T88788
Differential Revision: https://developer.blender.org/D11496
The (tracking) camera presets have not been updated in the last 7 or
more years, so they are very outdated. I found it pointless to have a
few specific camera models in the list and instead add the most commonly
used sensor sizes/film sizes. This way the list is shorter, easier to
maintain/becomes later outdated, and is more user friendly for most people
who don't own any of the specific cameras. I added the Crop Factor to the
Beginning of the name, so it gets sortet in the correct order and presets
are easier to find based on the size.
Reviewed By: #render_cycles, #motion_tracking, brecht, sergey
Differential Revision: https://developer.blender.org/D10739
These were only showing in the Properties Editor, but there is no reason
to have the panels be different in the sidebar (they should not show in
the top bar though).
agreed upon by both @anoniov and @mendio
ref T88787
So far, linked IDs were not properly sorted at all, only the ones
explicitely linked from WM code would be, but any indirectly linked
data-blocks would end up in some random order in their lists.
While not ideal, this is not a huge issue in itself, but it had bad
side-effects, e.g. causing (recursive) resync of overrides to happen in
random order, leading to mismatches between name indices of newly-generated
override IDs and the one existings e.g.
And in general, it is much better to be consistent here.
Note that the file sub-version is bumped for this commit, since some
sorting (the directly linked IDs which we keep a reference to) should
never need to be re-done after relevant doversion process.
This commit adds a node that outputs the total length of all
evalauted curve splines in a geometry set as a float value.
Differential Revision: https://developer.blender.org/D11459
This commit implements support for deleting curve data in the geometry
delete node. Spline domain and point domain attributes are supported.
Differential Revision: https://developer.blender.org/D11464
This implements T87633
This overlay renders a flash animation on the target object when
transfering the mode to it using the mode transfer operator.
This provides visual feedback when switching between objects without
extra overlays that affect the general color and lighting in the scene.
Differences with the design task:
- This uses just a fade out animation instead of a fade in/out animation.
The code is ready for fade in/out, but as the rest of the overlays
(face sets, masks...) change instantly without animation, having a fade
in/out effect gives the impression that the object flashes twice (once
for the face sets, twice for the peak alpha of the flash animation).
- The rendering uses a flat color without fresnel for now, but this can
be improved in the future to make it look more like the shader in the
prototype.
- Not enabled by default (can be enabled in the overlays panel), maybe
the defaults can change for 3.0 to disable fade inactive and enable this
instead.
Reviewed By: jbakker, JulienKaspar
Differential Revision: https://developer.blender.org/D11055
This operator is needed in some cases to update image preview.
In workspaces with smaller timelines this is limiting, because users
need to first check that mouse cursor is in correct place, then press
CTRL+R shortcut.
The Wayland server will not update hidden surfaces. This will block the
main event loop and thus also block updates to visible windows in a multi-
window setup.
Keyboard click-drag events now use the "Drag Threshold".
This resolves a problem where keyboard click drag events
used a much smaller threshold when using a tablet.
In some cases e.g. only objects would actually need resync, so
collections on the override character would not be resynced, and if some
objects were sharing relationships with others those could be
lost/destroyed.
max unneccessarily
Since rB298d5eb66916 [which was needed to update buttons with custom
property range functions correctly], using tab would always clamp
(hardmin/hardmax) properties which were using FLT_MAX / INT_MAX as range
in their property definitions.
The clamping of rB298d5eb66916 was copied over from rB9b7f44ceb56c
[where it was used for the softmin/softmax], and while the re-evaluation
of hardmin/hardmax is needed for custom property range functions, the
clamping should actually not take place.
There are many properties using FLT_MAX / INT_MAX etc. and while it
probably would be good to update these with ranges that make more sense
-- not using FLT_MAX / INT_MAX would not have done the clamping here --
there should not be an arbitrary limit to these and they should stay as
they are.
Maniphest Tasks: T88762
Differential Revision: https://developer.blender.org/D11473
Ensure 'virtual' linked override IDs generated by the recursive resync
process are tagged as indirectly linked data.
This is needed to avoid the 'missing data' messages on those virtual
data-blocks after saving and reloading.
`BKE_main_collections_parent_relations_rebuild`,
`BKE_collection_parent_relations_rebuild` anf their internal
dependencies had two issues fixed by this commit:
* Main one was that a same collection could be processed several times,
sometimes even in an infinite loop (in some rare corner cases), by
`collection_parents_rebuild_recursive`.
* More exotic, code here would not ensure that the collections it was
processing were actually in Main (or a master one from a scene in
Main), which became an issue with some advanced ID management
processes involving partially out-of-main remapping, like liboverride
resync.
Use SEQ_time_strip_intersects_frame function to test if strip intersects with frame.
Note: There are cases where this function should not be used. For example splitting
strips require at least 1 frame "inside" strip. Another example is drawing, where
playhead technically doesn't intersect strip, but it is rendered, because current
frame has "duration" or "thickness" of 1 frame.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11320
Remove unused flag `SEQ_DUPE_ANIM` and code used by this flag.
Remove flag `SEQ_DUPE_CONTEXT` and refactor code, to split operator
logic from duplication code.
Reduce indentation level in for loop.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11318
Images with 4:2:2 and 4:4:4 chroma subsampling were blurred when
`SWS_FAST_BILINEAR` interpolation is set for `anim->img_convert_ctx`.
Use `SWS_BILINEAR` interpolation for all movies, as performance is
not impacted by this change.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11457
Changes in rBce649c73446e, affected established proxy codec preset.
Presets were not working and all presets were similar to `veryfast`.
Tunes are now working too, so `fastdecode` tune can be used. I have
measured little improvement, but I tested this only on 2 machines and
I have been informed that `fastdecode` tune does influence decoding
performance for some users.
Change preset from `slow` to `veryfast` and add tune `fastdecode`
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11454
While encoder parameters for lossless encoding are set correctly,
output is not lossless due to pixel format being set to
`AV_PIX_FMT_YUV420P` which is inherently lossy due to chroma subsampling.
This was reported in T61569 and was merged to T57397, but there were
2 bugs - one for encoding and one for decoding.
Set pixel format to `AV_PIX_FMT_YUV444P` when rendering lossless H264
files. This format isn't available in `codec->pix_fmts[0]` and it looks,
that it has to be hard-coded.
Reviewed By: sergey
Differential Revision: D11458
This patch is from erik85, who says:
This patch makes populate_plane inside polymesh_from_trimesh_with_dissolve run in parallel.
On a test file with a boolean between two subdivided cubes (~6 million verts) this gives a 10% speed increase (49.5s to 45s) on my 6 core CPU.
Also there is an optimization of other_tri_if_manifold to skip the contains-call and get the pointer directly.
This reduces CPU time for find_patches from 5s to 2.2s on the same test file.
When there are many components (separate pieces of connected mesh),
a part of the algorithm to determine component containment was slow.
Using a float version of finding the nearest point on a triangle
as a prefilter sped this up enormously. A case of 25 icospheres
subdivided twice goes 11 seconds faster on my Macbook pro with this
change.
This just moves a couple of files in `space_node` to C++ and fixes
related errors.
The goal is to be able to use C++ data structures to simplify the code.
Differential Revision: https://developer.blender.org/D11451
The mesh to curve node generated an empty curve because no edges were
selected. This commit changes that node to not add a curve in that case.
This also changes the curve to mesh node to not add a material when
no mesh was created. Even though we don't expect null curves or meshes
in this case, the change is harmless.
EEVEE uses hashing to sync aov names and types with the gpu.
For the type a hashed value was overridden making `decalA`
and `decalB` choose the same hash. This patches fixes this
by removing the most significant bit.
EEVEE uses hashing to sync aov names and types with the gpu. For the type a hashed value was overridden making `decalA` and `decalB` choose the same hash. This patches fixes this by removing the most significant bit.
Sometimes is required to reset the thickness or the opacity of the strokes. Actually this was done using a modifier, but this operators solves this.
Reviewed By: mendio, filedescriptor
Maniphest Tasks: T87427
Differential Revision: https://developer.blender.org/D11453
Often you need to copy a spline to do an operation, but don't want
to manually copy over all of the settings. I've already forgotten to
do it once anyway. These functions copy a spline's "settings" into a
new spline, but not the data. I tried to avoid duplicating any copying
so this is easier to extend in the future.
Differential Revision: https://developer.blender.org/D11463
This is due to cam->obmat precision issue,
where it affects view vector precision.
Reviewed by Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D11461
Often it would be beneficial to avoid the virtual array implementation
in `geometry_component_curve.cc` that flattens an attribute for every
spline and instead read an attribute separately for every input spline.
This commit implements functions to do that.
The downside is some code duplication-- we now have two places handling
this conversion. However, we can head in this general direction for the
attribute API anyway and support accessing attributes in smaller
contiguous chunks where necessary.
No functional changes in this commit.
Differential Revision: https://developer.blender.org/D11456
Use the D-key to access the view menu instead of the Tilda key,
which isn't accessible on some international layouts.
To resolve the conflicts the following changes have been made.
- `D` (motion) opens the view menu.
- `D` (mouse-button) uses grease-pencil (as it does currently).
- `Tilda` is used to for "Object Mode Transfer" instead of the View menu.
See T88092 for details.
Reviewed By: Severin
Ref D11189
Add a doc-string explaining the purpose of each call back and
how they should be used.
Also add a currently unused callback 'POST_FAIL' that is to be used in
cases the action fails - giving script authors, a guarantee that a
call to `pre` will always have a matching `post/post_fail` call.
- D11422: adds a callback that can use 'post_fail'.
- T88696: proposed these conventions.
This node is similar to the mask modifier, but it deletes the elements
of the geometry corresponding to the selection, which is retrieved as
a boolean attribute. The node currently supports both mesh and point
cloud data. For meshes, which elements are deleted depends on the
domain of the input selection attribute, just like how behavior depends
on the selection mode in mesh edit mode.
In the future this node will support curve data, and ideally volume
data in some way.
Differential Revision: https://developer.blender.org/D10748
Metadata panel was visible in each category. In other editors, this
panel is usually placed in category with other source media properties.
In sequencer, metadata is transfered over while compositing and relation
to particular strip is lost, therefore separate category for metadata
seems to be best option. Since Metadata panel is alone in this category,
it will be open by default.
This commit skips the eager recalculation of mesh normals in the
transform node. Often another deformation or topology-altering
operation will happen after the transform node, which means the
recalculation was redundant anyway.
In one of my test cases this made the node more than 14x faster.
Though depending on the situation the cost of updating the normals
may just be shifted elsewhere.
This was reported for the special case of mapping with "Strand /
Particle" coords, but was not working with other coordinates either.
Dont see a reason for not supporting Size influence textures for these
kinds of particles (and since these types of particles have an "age"
like all others as well, even the "Strand / Particle" coords are
supported here as well)
Maniphest Tasks: T88715
Differential Revision: https://developer.blender.org/D11449
This fixes T88455 by adding an empty material slot to newly
generated meshes. This allows the object to overwrite the
"default" material without any extra nodes. Technically,
all polygons reference the material index 0 already, so it
makes sense to add a material slot for this material index.
Differential Revision: https://developer.blender.org/D11439
Removing scripts that were placed in the source tree that would drive
the old buildbot. With the new buildbot in place these scripts aren't
being used anymore.
The buildbit is currently driven by
`build_files/config/pipeline_config.json`. In the near future make
update would also use this config.
Overview of the new buildbot: https://wiki.blender.org/wiki/Infrastructure/BuildBot
Work done by James Monteath.
`bvhtree_from_mesh_edges_create_tree` can actually leave the BVHTree
NULL (e.g. if no edges are present).
Now dont allocate `BVHTreeFromMesh` on the `SurfaceModifierData` at all
in case the tree would be NULL anyways.
Places like `get_effector_data` check for `SurfaceModifierData`-
>`BVHTreeFromMesh` and dont try to stuff like getting a closest point on
surface, which would crash as soon as BVHNodes would need to be accessed
(from the NULL BVHTree).
Maniphest Tasks: T88658
Differential Revision: https://developer.blender.org/D11443
This commit fixes two different issues:
* In some cases, when an object was added to a sub-collection and used
into a different subcollection, and the root common collection would
not need to be resynced, it would end up creating multiple overrides
of the new object. This was affecting both normal and recursive
resync.
* In recurisve resync case, the barrier code to define what is part or
not of a override group/hierarchy was wrong.
Note that the current solution for the first issue is sub-optimal (it
goes back to the root of the override hierarchy and resync the whole
thing), a better solution is TODO for now.
This function would considere that there was a name conflict even in
case existing ID would be a linked one.
This is only a (symbolic) perforance improvement and logical fix, since
`BKE_id_new_name_validate` would not do that mistake anyway.
This is mandatory for liboverride resync, since this feature may imply
we have to create linked overrides in libraries, and there may be
several copies of those.
This is also a first step to a more general support of IDmanagement-editing
library data.
Note that this commit should have absolutely no effect on current code,
as the only function allowed to check unique names for linked IDs
currently is `BKE_libblock_management_main_add`, which is unused.
This commit also adds some basic testing for `BKE_id_new_name_validate`.
This patch adds the base code needed to make the full-frame system work for both current tiled/per-pixel implementation of operations and full-frame.
Two execution models:
- Tiled: Current implementation. Renders execution groups in tiles from outputs to input. Not all operations are buffered. Runs the tiled/per-pixel implementation.
- FullFrame: All operations are buffered. Fully renders operations from inputs to outputs. Runs full-frame implementation of operations if available otherwise the current tiled/per-pixel. Creates output buffers on first read and free them as soon as all its readers have finished, reducing peak memory usage of complex/long trees. Operations are multi-threaded but do not run in parallel as Tiled (will be done in another patch).
This should allow us to convert operations to full-frame in small steps with the system already working and solve the problem of high memory usage.
FullFrame breaking changes respect Tiled system, mainly:
- Translate, Rotate, Scale, and Transform take effect immediately instead of next buffered operation.
- Any sampling is always done over inputs instead of last buffered operation.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11113
draw_cache_extract_mesh for task scheduling. Will be refactored to draw_cache_extract_mesh_scheduling later on after migrating to CPP.
draw_cache_extract_mesh_render_data extraction of mesh render data from edit mesh/mesh into a more generic structure.
draw_cache_extract_mesh_extractors containing all the extractors. This will be split up further into a single file per extractor.
This was kept since these blocks are easier to follow.
Remove as the overall result wasn't so readable
(especially with nested ifdef's).
Replace disabled code with comment on the indices used for quads/tris.
2 sided faces aren't supported and will cause problems in many areas
of Blender's code.
Removing (implied) support for faces with fewer than 3 sides
means the total number of triangles is known ahead of time.
This simplifies adding support for multi-threading and partial updates
to an existing tessellation - as the face and loop indices can be used
to access the range of triangles associated with a face.
Also correct outdated comments.
When projecting into screen space Z value isn't always needed.
Add 2D projection functions, renaming them to avoid accidents
happening again.
- Add GPU_matrix_project_2fv
- Add ED_view3d_project_v2
- Rename ED_view3d_project to ED_view3d_project_v3
- Use the 2D versions of these functions when the Z value isn't used.
This is from patch D11432 from Erik Abrahamsson. He found that
in some mpq3 functions called frequently from loops, passing in
buffers for termporary mpq3 values can save substantial time.
On my machine, his example in that patch went from 9.48s to 7.50s
for the boolean part of the calculation. On his machine, a running
time went from 17s to 10.3s.
The fseek() function on Windows only accepts a 32-bit long offset
argument. Because of this we have our own version, BLI_fseek(), which
will use 64-bit _fseeki64() on Windows. This patch just replaces some
fseek() calls with BLI_fseek().
Differential Revision: https://developer.blender.org/D11430
Reviewed by Brecht Van Lommel
Now FPS is displayed in the video source for videos to provide easy
access.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11441
bf_bmesh historically always build with the /WX flag
on windows making all warnings errors, somewhere along
the way this has broken for msbuild, ninja still exhibits
the expected behaviour.
The flags are still passed to the target, and I've validated
they are there when the add_library call fires, but they
somehow never make it to the generated msbuild project files.
I suspect this is a cmake bug but I'm seemingly unable
to extract a repro case to file a bug upstream.
Setting the same options target_compile_options seems to work,
I'm not happy about the unexplained nature of the breakage
but this will have to do for now.
The same code existed in 2.82 and earlier so this should be safe. Removing the
custom implementation of shutil.copytree in f34d5d9 did not correctly add back
the option to copy symlinks.
This patch replaces / redoes the entire MeshExtractors system.
Although they were useful and facilitated the addition of new buffers, they made it difficult to control the threads and added a lot of threading overhead.
Part of the problem was in traversing the same loop type in different threads. The concurrent access of the BMesh Elements slowed the reading.
This patch simplifies the use of threads by merging all the old callbacks from the extracts into a single series of iteration functions.
The type of extraction can be chosen using flags.
This optimized the process by around 34%.
Initial idea and implementation By @mano-wii.
Fine-tuning, cleanup by @atmind.
MASTER:
large_mesh_editing:
- rdata 9ms iter 50ms (frame 155ms)
- Average: 6.462874 FPS
PATCH:
large_mesh_editing:
- rdata 9ms iter 34ms (frame 136ms)
- Average: 7.379491 FPS
Differential Revision: https://developer.blender.org/D11425
For 2.93 we bumped the minimum windows requirement
to windows 8.1, but did not do any clean-up of any
win 8/8.1 API usage we dynamically accessed though
LoadLibrary/GetProcAddress.
This patch bumps _WIN32_WINNT to 0x0603 (win 8.1)
and cleans up any API use that was accessed in a
more convoluted way than necessary
Differential Revision: https://developer.blender.org/D11331
Reviewed by: harley, nicholas_rishel
Use the appropriate notifier, listeners were already doing the rest
properly.
Maniphest Tasks: T88569
Differential Revision: https://developer.blender.org/D11436
Cause is that initializing the cryptomatte session would reset the
current frame of an image sequence. The solution is to always use the
scene current frame so it resets to the correct frame.
This was a todo that wasn't solved after it landed in master.
Needs to be backported to 2.93.
When compositor node tree has a texture node, TextureOperation vector inputs has always {0, 0} resolution instead of having same resolution as TextureOperation which is the expected behaviour for resolutions propagation.
Current TextureOperation determineResolution implementation doesn't determine inputs resolution, breaking propagation of preferred resolution and that's the reason why they are always 0. Setting scene resolution always would mean it is its own resolution and could make sense, but setting it only when preferred resolution is 0, breaks preferred resolution logic affecting other operations as explained in D10972. In any case scene resolution is already the default preferred resolution on viewer and compositor nodes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11381
The issue was two fold. We didn't properly:
1. Initialize the codec default values which would lead to VLC
complaining because of garbage/wrong codec settings.
2.Calculate the time base for the video. FFmpeg would happily accept
this but VLC seems to assume the time base value is at least somewhat
correct and couldn't properly display the frames as the internal time
base was huge. We are talking about 90k ticks (tbn) for one second of
video!
This patch initializes all codecs to use their default values and fixes
the time base calculation so it follows the guidelines from ffmpeg.
Reviewed By: Sergey, Richard Antalik
Differential Revision: http://developer.blender.org/D11426
Code checking for potential collection loop dependencies can be called
in cases where we cannot guarantee that there is no NULL pointers, so we
need to check those. Was already done for objects.
NOTE: doubled-checked by @jbakker, thanks.
Code checking for potential collection loop dependencies can be called
in cases where we cannot guarantee that there is no NULL pointers, so we
need to check those. Was already done for objects.
Reuse loose geometry during selection (and other operations) from
previous calculation. Loose geometry stays the same, but was
recalculated to determine the size of GPU buffers. This patch would
reuse the previous loose geometry when geometry wasn't changed.
Although not the main bottleneck during selection it is measurable.
Master.
`rdata 46ms iter 55ms (frame 410ms)`
This patch.
`rdata 5ms iter 52ms (frame 342ms)`
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11339
This patch from Erik Abrahamsson uses a parallel_for to speed up
the case where the input is not manifold and the "hole_tolerant"
option is set.
In a test case on a 24 core (48 thread) machine, this sped up a
the boolean part on an object with 221k triangles from 12.06s to 0.46s.
When using ``Path`` alignment, if the stroke has one point the texture rotates randomly when move the viewport. This was because with one point is impossible to calculate a path.
Now, if the stroke has only one point, the texture for this stroke is aligned to Object.
Before the FFmpeg commit: github.com/FFmpeg/FFmpeg/commit/1c0885334dda9ee8652e60c586fa2e3674056586
FFmpeg would use deprecated variables to calculate the video fps.
We don't use these deprecated variables anymore, so ensure that the
duration is correct in ffmpeg versions without this fix.
Reviewed By: Sergey, Richard Antalik
Differential Revision: http://developer.blender.org/D11417
We didn't initialize the scaled proxy frame properly.
This would lead to issues in ffmpeg 4.4 as they are more strict that the API is properly used.
Now we initialize the size and format of the frame.
Based on the task T88006, there are a few simple changes
to make to improve the switch node:
- Change the label to "False" / "True" for clarity
- Change default to geometry, as it's the basic data container in
geometry nodes.
- Change node class to `NODE_CLASS_CONVERTOR`, which was an oversight
in the original patch.
I will add the new socket types (material and texture) in a separate commit.
Thanks to @EitanSomething for the original patch.
Differential Revision: https://developer.blender.org/D11165
This was caused by unsafe sqrt calls.
Fixes T86578 white artifacts in EEVEE
Reviewed By: brecht, dfelinto
Differential Revision: https://developer.blender.org/D11428
While we could make this node work for boolean inputs in the future,
currently it's really just designed to compare "float-like" inputs.
Many comparison modes don't even make sense for boolean inputs.
Therefore, the simplest fix for this bug is just to disable the
boolean attribute input modes for this node.
Differential Revision: https://developer.blender.org/D11427
When using ``Path`` alignment, if the stroke has one point the texture rotates randomly when move the viewport. This was because with one point is impossible to calculate a path.
Now, if the stroke has only one point, the texture for this stroke is aligned to Object.
This node creates poly curve splines from mesh edges. A selection
attribute input allows only using some of the edges from the mesh.
The node builds cyclic splines from branchless groups of edges where
possible, but when there is a three-way intersection, the spline stops.
The node also transfers all attributes from the mesh to the resulting
control points. In the future we could add a way to limit that to a
subset of the attributes to improve performance.
The algorithm is from Animation Nodes, written by @OmarSquircleArt.
I added the ability to use a selection, attribute transferring, and
used different variable names, etc, but other than that the algorithm
is the same.
Differential Revision: https://developer.blender.org/D11265
Not entirely sure why this was not an issue for 16.9
but TBB includes the Windows.h header which by default
will define min and max macro's
These collide with the stl versions in <algorithm>
This patch requests Windows.h not to define the
problematic macro's, resolving the conflict.
Caused by {rB66923031e6f2}.
Code would process unselected sequences and skip selected, needs to be
the other way around.
Maniphest Tasks: T88635
Differential Revision: https://developer.blender.org/D11424
When using the operator `ui.copy_data_path_button(full_path=True)` ({key
ctrl shift Alt C} on hover) the copied path does not consider the
library origin. That means that when there is a name clash the data path
is not accurate and refers to the local item instead.
This patch adds the library (if the ID is linked) of the returned string
from RNA_path_full_ID_py.
bpy.data.objects["Cube", "//library.blend"] instead of
bpy.data.objects["Cube"]
note: parsing this happens in
pyrna_prop_collection_subscript_str_lib_pair_ptr
Maniphest Tasks: T88499
Differential Revision: https://developer.blender.org/D11412
A utility that supports passing in actions as command line arguments for
writing reproducible interactions, benchmarking, profiling and testing.
Unlike regular scripts this is able to control model operators usefully.
Typical ways of controlling Blender using this utility are via
operator id's, menu search and explicit events.
Others methods can be added as needed.
See the doc-string for example usage.
This patch will use compute shaders to create the VBO for hair.
The previous implementation uses transform feedback.
Timings before: between 0.000069s and 0.000362s.
Timings after: between 0.000032s and 0.000092s.
Speedup isn't noticeable by end-users. The patch is used to test
the new compute shader pipeline and integrate it with the draw
manager. Allowing EEVEE, Workbench and other draw engines to
use compute shaders with the introduction of `DRW_shgroup_call_compute`
and `DRW_shgroup_vertex_buffer`.
Future improvements are possible by generating the index buffer
of hair directly on the GPU.
NOTE: that compute shaders aren't supported by Apple and still use
the transform feedback workaround.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D11057
Added missing topbar in VSE.
Also added the Stabilizer options to Topbar for all modes.
Reviewed By: mendio, pepeland
Maniphest Tasks: T86465
Differential Revision: https://developer.blender.org/D11347
We need to re-evaluate what needs to be resynced after each step of
processing overrides from a given 'indirect level' of libraries.
Otherwise, recusrive overrides (overrides of linked overrides) won't
work.
Note that this should not change too much in practice currently, since
there are other issues with recursive overrides yet.
Also, checks (CLOG errors) added show that some ID (node trees) seem to
be detected as needing resynced even after beig just resynced, this
needs further investigation still. Could be though that it is due to
limit currently set on nodetrees, those are always complicated
snowflakes to deal with...
Oversight in {rB470f17f21c06}.
Hiding was only done for the first mesh, then the operator finished (in
case of UV_SYNC_SELECTION).
Now just continue to the next.
Maniphest Tasks: T88625
Differential Revision: https://developer.blender.org/D11413
Both before and after can have artifacts with some normal maps, but this seems to give
worse artifacts on average which are not worth the minor performance increase.
This reverts commit 5c4d24e1fd.
Ref T88368, D10084
This allows choosing material and texture sockets for the group input
node in the modifier. Note that currently grease pencil materials are
displayed in the list, even though grease pencil data is not supported
yet by geometry nodes. That is more complicated to fix in this case,
since we use IDProperties to store the dynamic exposed inputs.
Differential Revision: https://developer.blender.org/D11393
blender-laucher.c was not an ideal name for this file
since it's not directly clear it is windows only.
This change renames it to blender_launcher_win32.c
to be more in line with other win32 specific files
we have.
This patch adds relatively small changes to the curve draw
cache implementation in order to draw the curve data in the
viewport. The dependency graph iterator is also modified
so that it iterates over the curve geometry component, which
is presented to users as `Curve` data with a pointer to the
`CurveEval`
The idea with the spline data type in geometry nodes is that
curve data itself is only the control points, and any evaluated
data with faces is a mesh. That is mostly expected elsewhere in
Blender anyway. This means it's only necessary to implement
wire edge drawing of `CurveEval` data.
Adding a `CurveEval` pointer to `Curve` is in line with changes
I'd like to make in the future like using `CurveEval` in more places
such as edit mode.
An alternate solution involves converting the curve wire data
to a mesh, however, that requires copying all of the data, and
since avoiding it is rather simple and is in-line with future plans
anyway, I think doing it this way is better.
Differential Revision: https://developer.blender.org/D11351
This patch removes unnecessary calls to `BKE_main_id_tag_all` where the
same job is done by `BKE_main_id_clear_newpoins` on the following line.
Reviewed By: campbellbarton, mont29
Ref D11379
Use array instead of ListBase for line art
bounding area linked triangles and edges.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D11302
This is not supposed to happen, but better be safe than sorry, and
assume it is beyond unlikely that someone would use chains of over 10k
linked libraries.
Allows to centralize storage and modification checks in a single place,
avoiding duplication in the synchronization code.
Ideally we would somehow be able to more granularly modify Cycles side
objects. Leaving this for a future decision, because it might be better
to implement it as a graph on the sync side.
Makes it more explicit they operate on shading/light.
Gives room to move more viewport related settings into this class and
cover with specific or generic modification checks.
Such pattern should only be used when it is really needed. Otherwise
just stick to a more regular design, without worrying who is the user
of the class. Otherwise it will be annoying to subclass or unit test.
No need to state that it is a viewport display pass, since the method
is within viewport parameters it is implied that parameters do belong
to the viewport.
Brings this code closer to the Cycles-X branch.
Very stupid mistake in libraries indirect-level building code, was not
skipping 'loop-back' ID pointers.
Note that we also need some level of checks for the case where there
would be an actual dependency loop between libraries, this is not
supposed to be possible, but better be safe than sorry. Will add in next
commit.
An arbitrary size offsets was used in float_array_to_string,
simplify the loop, use exact size limits.
Also rename variables so it's clear which array the length apply to.
Event though in practice this wasn't causing problems as the fixed size
buffers are generally large enough not to truncate text.
Using the result from `snprint` or `BLI_snprintf` to step over a fixed
size buffer allows for buffer overruns as the returned value is the size
needed to copy the entire string, not the number of bytes copied.
Building strings using this convention with multiple calls:
ofs += BLI_snprintf(str + ofs, str_len_max - ofs);
.. caused the size argument to become negative,
wrapping it to a large value when cast to the unsigned argument.
A deadlock could happen under certain circumstances when
geometry nodes is used on multiple objects.
Once T88598 is resolved, multi-threading can be enabled again.
Differential Revision: https://developer.blender.org/D11405
While the advantage isn't large,
it's simpler to skip the intermediate link.
Also remove unused next and previous struct members
from MeshUndoStep_Elem.
When editing more than 1 object at a time, complete copies of each mesh
were being stored. Now the most recent undo-data for each mesh is used
(when available).
This commit adds interpolation from the point domain to the spline
domain and the other way around. Before this, spline domain attributes
were basically useless, but now they are quite helpful as a way to use
a shared value in a contiguous group of points.
I implementented a special virtual array for the spline to points
conversion, so that conversion should be close to the ideal performance
level, but there are a few ways we could optimize the point to spline
conversion in the future:
- Use a function virtual array to mix the point values for each spline
on demand.
- Implement a special case for when the input virtual array is one of
the virtual arrays from the spline point attributes. In other words,
decrease curve attribute access overhead.
Differential Revision: https://developer.blender.org/D11376
This patch fixes a long-standing complaint from users:
the console window shortly flashing when they start
blender.
This is done by adding a new executable called
blender-launcher.exe which starts blender.exe while
hiding the console.
Any command line parameters given to blender-launcher
will be passed on to blender.exe so it'll be a drop
in replacement.
Starting blender.exe on its own will still function as
a proper console app so no changes required here for
users that use blender for batch processing.
Notable changes:
Registering blender (-R switch) will now register
blender-launcher as the preferred executable.
This patch updates the installer and updates the
shortcuts to start blender-launcher.exe rather
than blender.exe
Differential Revision: https://developer.blender.org/D11094
Reviewed by: brecht, harley
This reverts commit 8f9599d17e.
Mac seems to have an error with this change.
```
ERROR: /Users/blender/git/blender-vdev/blender.git/source/blender/draw/intern/draw_hair.c:115:44: error: use of undeclared identifier 'shader_src'
ERROR: /Users/blender/git/blender-vdev/blender.git/source/blender/draw/intern/draw_hair.c:123:13: error: use of undeclared identifier 'shader_src'
ERROR: make[2]: *** [source/blender/draw/CMakeFiles/bf_draw.dir/intern/draw_hair.c.o] Error 1
ERROR: make[1]: *** [source/blender/draw/CMakeFiles/bf_draw.dir/all] Error 2
ERROR: make: *** [all] Error 2
```
Both before and after can have artifacts with some normal maps, but this seems to give
worse artifacts on average which are not worth the minor performance increase.
This reverts commit 21bc1a99ba.
Ref T88368, D10084
The skin modifier was moving vertices without updating normals for the
connected faces, this happened when smoothing and welding vertices.
Reviewed By: mont29
Ref D11397
Recursive resync means also resyncing overrides that are linked from
other library files into current working file.
Note that this allows to get 'working' files even when their
dependencies are out of sync. However, since linked data is never
written/saved, this has to be re-done every time the working file is
loaded, until said dependencies are updated properly.
NOTE: This is still missing the 'report' side of things, which is part
of a larger task to enhance reports regarding both linking, and
liboverrides (see T88393).
----------
Technical notes:
Implementing this proved to be slightly more challenging than expected,
mainly because one of the key aspects of the feature was never done in
Blender before: manipulating, re-creating linked data.
This ended up moving the whole resync code to use temp IDs out of bmain,
which is better in the long run anyway (and more aligned with what we
generally want to do when manipulating temp ID data). It should also
give a marginal improvement in performances for regular resync.
This commit also had to carefully 'sort' libraries by level of indirect
usage, as we want to resync first the libraries that are the least directly
used, i.e. libraries that are most used by other libraries.
Even though shepkeys are not strictly speaking an embedded data, they
share quiet a few points with those, and from liboverride perspective
they are embedded, so...
While indeally we should only skip refcounting when relevant tag is set,
doing this in remapping code is too risky for now.
Related to previous commit and T88555.
While this is still very fuzzy in current code, this old behavior makes
it close to impossible to efficiently use out-of-main temp data, as it
implies that we'd need to update refcounts everytime we add something
back into BMain (an 'un-refcount' ID usages when removing from BMain).
Now that we have two separate flags/tags for those two different things,
let's not merge them anymore.
Note that this is somewhat on-going process, still needs more checks and
cleanup. Related to T88555.
This patch will use compute shaders to create the VBO for hair.
The previous implementation uses tranform feedback.
Timings master (transform feedback with GPU_USAGE_STATIC between 0.000069s and 0.000362s
Timings transform feedback with GPU_USAGE_DEVICE_ONLY. between 0.000057s and 0.000122s
Timings compute shader between 0.000032 and 0.000092s
Future improvements:
* Generate hair Index buffer using compute shaders: currently done single threaded on CPU, easy to add as compute shader.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D11057
With the compute pipeline calculation can be offloaded to the GPU.
This patch only adds the framework for compute. So no changes for users at
this moment.
NOTE: As this is an OpenGL4.3 feature it must always have a fallback.
Use `GPU_compute_shader_support` to check if compute pipeline can be used.
Check `gpu_shader_compute*` test cases for usage.
This patch also adds support for shader storage buffer objects and device only
vertex/index buffers.
An alternative that had been discussed was adding this to the `GPUBatch`, this
was eventually not chosen as it would lead to more code when used as part of a
shading group. The idea is that we add an `eDRWCommandType` in the near
future.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D10913
This patch adds an option in the Layers > Relations panel called "Disable Masks in Render".
When checked, no masks on this layer are included in the render.
Example:
| {F10087680} | {F10087681} |
See T88202 for why this is needed.
Reviewed By: antoniov
Maniphest Tasks: T88202
Differential Revision: https://developer.blender.org/D11234
Currently when rendering the view layer of a grease pencil layer that has
a mask layer attached, the mask layer would show in the rendered image.
This is inconsistent with the default behaviour with no mask on the
grease pencil layer, because it would only render what's on that
particular layer and not anything from any other layer.
This patch makes the masks invisible in the render.
Note: This might seem like not the best solution, but because masks are
just regular grease pencil layers, it's tricky to pass this edge-case to the
drawing code. The way it is handled right now is the best I could come
up with, without making changes that could affect something else.
Reviewed By: antoniov
Maniphest Tasks: T88202
Differential Revision: https://developer.blender.org/D11403
This issue was that `BKE_object_eval_uber_data` was not called for
the text object, because its geometry was not dependent upon
and its `is_directly_visible` tag was `false`. The crash happens in
rendering code, because the evaluated data is missing.
This not only affects text objects, but all object types that have a
geometry component that geometry nodes does not support yet.
The solution is to just add the missing dependencies.
Differential Revision: https://developer.blender.org/D11385
This operator is a common request of animators to convert the transformation (inluding modifiers) of one grease pencil object, into a new object, generating strokes.
Reviewed By: pepeland
Maniphest Tasks: T87424
Differential Revision: https://developer.blender.org/D11014
Calling BKE_nodetree_attribute_hint_add from multiple threads still
was not safe before..
One issue was that context_map embedded its values directly. So
when context_map grows, all NodeUIStorage would move as well.
I could patch around that by using std::unique_ptr in a few places,
but that just becomes too complex for now.
Instead I simplified the locking a bit by adding just locking a mutex
in NodeTreeUIStorage all the time while an attribute hint is added.
Differential Revision: https://developer.blender.org/D11399
When an `AttributeSet` is tagged as modified, which happens after the addition or
removal of an `Attribute` from the set, during the following GeometryManager device
update, we update and repack the kernel data for all attribute types. However, if we
only add or remove a `float` attribute, `float2` or `float3` attributes should not
be repacked for efficiency.
This patch adds some mechanisms to detect which attribute types are modified from
the AttributeSet.
Firstly, this adds an `AttrKernelDataType` to map the data type of the Attribute to
the one used in the kernel as there is no one to one match between the two since e.g.
`Transform` or `float4` data are stored as `float3s` in the kernel.
Then, this replaces the `AttributeSet.modified` boolean with a set of flags to detect
which types have been modified. There is no specific flag type (e.g.
`enum ModifiedType`), rather the flags used derive simply from the
`AttrKernelDataType` enumeration, to keep things synchronized.
The logic to remove an `Attribute` from the `AttributeSet` and tag the latter as modified
is centralized in a new `AttributeSet.remove` method taking an iterator as input.
Lastly, as some attributes like standard normals are not stored in the various
kernel attribute arrays (`DeviceScene::attribute_*`), the modified flags are only
set if the associated standard corresponds to an attribute which will be stored
in the kernel's attribute arrays. This makes it so adding or removing such attributes
does not trigger an unnecessary update of other type-related attributes.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D11373
Sharing data between duplicated IDs should be restricted to depsgraph
(CoW) cases, not all NO_MAIN ones...
While this was probably not an issue currently, we aim at using more and
more out-of-main IDs for temp data processing.
NOTE: Somewhat related to T88555, and similar issue as the one fixed in
rBdfb963c70df5.
Objects modified by geometry nodes modifiers were not caught as being
"dynamic".
Now add this modifier type to the list of modifiers making them "dynamic"
in the eyes of mantaflow.
(noticed by @sebbas in chat)
Maniphest Tasks: T88531
Differential Revision: https://developer.blender.org/D11389
(regression)
Code was actually checking for shapekeys, but these were not detected
properly (some effects like shape keys are added as virtual modifiers
before the user created modifiers)
Now go over virtual modifiers as well.
Maniphest Tasks: T88566
Differential Revision: https://developer.blender.org/D11388
Caused by {rB919558854d62}.
Same fix as in {rBdc8a43c8755a} -- let RNA enum item callbacks check
for NULL context.
The NULL context is used to extract items for document generation.
Maniphest Tasks: T88251
Differential Revision: https://developer.blender.org/D11391
Bump FFmpeg version to 4.4 to fix a problem where it would write the
wrong frame rate. Their old API was deprecated and Blender moved to the
new one in rB8d6264ea12bfac0912c7249f00af2ac8e3409ed1. The new one
produced files with the wrong frame rate, which was fixed in FFmpeg 4.4.
Manifest Task: T88568
Reviewed By: LazyDodo, zeddb
Differential Revision: https://developer.blender.org/D11392
This option is default off when creating line art objects
because line art seldom use lighting and the normal data
would be all over the place anyway.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D11372
This clarifies the data structures for storing edges
for different calculation stages.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D11386
Colors are often thought of as being 4 values that make up that can make any color.
But that is of course too limited. In C we didn’t spend time to annotate what we meant
when using colors.
Recently `BLI_color.hh` was made to facilitate color structures in CPP. CPP has possibilities to
enforce annotating structures during compilation and can adds conversions between them using
function overloading and explicit constructors.
The storage structs can hold 4 channels (r, g, b and a).
Usage:
Convert a theme byte color to a linearrgb premultiplied.
```
ColorTheme4b theme_color;
ColorSceneLinear4f<eAlpha::Premultiplied> linearrgb_color =
BLI_color_convert_to_scene_linear(theme_color).premultiply_alpha();
```
The API is structured to make most use of inlining. Most notable are space
conversions done via `BLI_color_convert_to*` functions.
- Conversions between spaces (theme <=> scene linear) should always be done by
invoking the `BLI_color_convert_to*` methods.
- Encoding colors (compressing to store colors inside a less precision storage)
should be done by invoking the `encode` and `decode` methods.
- Changing alpha association should be done by invoking `premultiply_alpha` or
`unpremultiply_alpha` methods.
# Encoding.
Color encoding is used to store colors with less precision as in using `uint8_t` in
stead of `float`. This encoding is supported for `eSpace::SceneLinear`.
To make this clear to the developer the `eSpace::SceneLinearByteEncoded`
space is added.
# Precision
Colors can be stored using `uint8_t` or `float` colors. The conversion
between the two precisions are available as methods. (`to_4b` and
`to_4f`).
# Alpha conversion
Alpha conversion is only supported in SceneLinear space.
Extending:
- This file can be extended with `ColorHex/Hsl/Hsv` for different representations
of rgb based colors. `ColorHsl4f<eSpace::SceneLinear, eAlpha::Premultiplied>`
- Add non RGB spaces/storages ColorXyz.
Reviewed By: JacquesLucke, brecht
Differential Revision: https://developer.blender.org/D10978
Colors are often thought of as being 4 values that make up that can make any color.
But that is of course too limited. In C we didn’t spend time to annotate what we meant
when using colors.
Recently `BLI_color.hh` was made to facilitate color structures in CPP. CPP has possibilities to
enforce annotating structures during compilation and can adds conversions between them using
function overloading and explicit constructors.
The storage structs can hold 4 channels (r, g, b and a).
Usage:
Convert a theme byte color to a linearrgb premultiplied.
```
ColorTheme4b theme_color;
ColorSceneLinear4f<eAlpha::Premultiplied> linearrgb_color =
BLI_color_convert_to_scene_linear(theme_color).premultiply_alpha();
```
The API is structured to make most use of inlining. Most notable are space
conversions done via `BLI_color_convert_to*` functions.
- Conversions between spaces (theme <=> scene linear) should always be done by
invoking the `BLI_color_convert_to*` methods.
- Encoding colors (compressing to store colors inside a less precision storage)
should be done by invoking the `encode` and `decode` methods.
- Changing alpha association should be done by invoking `premultiply_alpha` or
`unpremultiply_alpha` methods.
# Encoding.
Color encoding is used to store colors with less precision as in using `uint8_t` in
stead of `float`. This encoding is supported for `eSpace::SceneLinear`.
To make this clear to the developer the `eSpace::SceneLinearByteEncoded`
space is added.
# Precision
Colors can be stored using `uint8_t` or `float` colors. The conversion
between the two precisions are available as methods. (`to_4b` and
`to_4f`).
# Alpha conversion
Alpha conversion is only supported in SceneLinear space.
Extending:
- This file can be extended with `ColorHex/Hsl/Hsv` for different representations
of rgb based colors. `ColorHsl4f<eSpace::SceneLinear, eAlpha::Premultiplied>`
- Add non RGB spaces/storages ColorXyz.
Reviewed By: JacquesLucke, brecht
Differential Revision: https://developer.blender.org/D10978
Using displacement runs the shader eval kernel, but since OptiX modules are not loaded when
baking is active, those were not available and therefore failed to launch. This fixes that by falling
back to the CUDA kernels.
Issue is that due to the strange definition of render in grease pencil
(meaning should be rendered similar to rendering). This included normal
viewport rendering in OB_RENDER and OpenGL render in OB_RENDER.
For other rendering modes the overlay vertex opacity would be used. This
patch sets this value to 1 when rendering via a scene strip override.
NOTE: that this isn't a good solution as I expect that users want to use
the opacity of the Grease pencil object. Perhaps the GPencil team has a
better solution for it.
Tool settings for sequencer were not initialized, which caused crash
when adding strips.
There was fix for same issue in versioning rB0f81dafe6cec, but
subversion was not bumped, so files with uninitialized tool settings
may still exist.
Add `SEQ_tool_settings_get()` accessor function that will initialize
tool settings if they are missing. Change operator code to use
`SEQ_tool_settings_fit_method_get()` function instead of accessing
tool settings directly
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D11383
This will update active camera based on the maker for each frame.
Reviewed By: Sebastian Parborg (zeddb), Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D11358
Do not allow a window to be created that has a top position that
can obscure all or part of title bar. Right and Left edges can
still be specified slightly outside of monitor bounds, but top
edge must be clamped to monitor top.
see D11371 for more details.
https://developer.blender.org/D11371
Reviewed by Ray Molenkamp
This fallback is an old hack.
It is difficult to have an orientation convention when several random
factors determine which one should be used.
In this case, to "fix" the problem, a new behavior had to be implemented.
Now the redo when moving the camera in `Camera View` has the default
orientation as `View`.
Deduplicates code by introducing a PlaneDirtortBaseOperation for common logic.
Reviewed By: #compositing, jbakker
Differential Revision: https://developer.blender.org/D11273
Prepare node for conversion to Geometry Nodes.
There should be no functional changes.
Reviewed By: JacquesLucke, LazyDodo
Differential Revision: https://developer.blender.org/D11226
When sound strip is above another strip such as movie strip, it prevents
from rendering movie strip.
This bug was introduced in 0b7744f4da. Function `must_render_strip()`
checks if there is any strip with `SEQ_BLEND_REPLACE` blending and
considers this strip as lowest strip in stack. Sound strips do have this
blend mode set, which caused the bug.
Remove all sound strips and muted strips from stack collection before
checking with `must_render_strip()` function
I'd like to use this file to draw curves from geometry nodes, which
would otherwise require implementing a C API. The changes in this
commit are minimal, mostly just casts and changing to nullptr.
Differential Revision: https://developer.blender.org/D11350
The CoW copy of the node group was not updated correctly after it
changed. Arguably, tagging the node tree could also be part of
`ntreeUpdateTree` (which needs to be called after changes to the
node tree anyway). However, there are many instances where the
depsgraph is tagged explicitly after `ntreeUpdateTree` is called,
so it should be fine here as well. This is similar to what is done
in `snode_dag_update`.
Differential Revision: https://developer.blender.org/D11342
The wrong matrix function was used and overwrote the custom bone shape
scale instead of reading from it.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D11330
When creating Win32 windows, the sizes and placements can be out by a
small amount, mostly noticeable near monitor edges. This is because
Windows 10 includes a thin invisible border (typically 7 pixels) when
determining position. Therefore the correct values can sometimes be
just outside the monitor bounds, but we clamp them at those bounds.
This patch fixes this by first clamping the requested values to monitor
bounds, adjusting for window chrome with AdjustWindowRectEx(), and then
using those adjusted values in CreateWindowExW().
see D11314 for more details.
Differential Revision: https://developer.blender.org/D11314
Reviewed by Ray Molenkamp
Accessing data through RNA should never implicitely create it. Objects'
and particles' forcefields and collision settings were doing this.
Note that UI code also had to be tweaked to properly handle `None`
(NULL) cases.
Differential Revision: https://developer.blender.org/D11341
This data (the force fields) are expected to always be there, but they
are currently created on the fly by RNA accessors (typically from UI
draw code), which is extremely wrong way to do it.
Differential Revision: https://developer.blender.org/D11341
This is an initial change to speed up the calculation of the Occlude eraser. In the future, we can add more optimizations, but at least this increase speed.
Intead to check always the 3 points, the check is skipped if it's not required.
Base in a solution by Philipp Oeser.
This is related to T88412
Root of the issue was actually hidden deep in depsgraph itself: it would
not properly update all of its COW IDs using a datablock when depsgraph
decides to evaluate or un-evaluate it.
This would lead to evaluated IDs pointing to either:
- orig IDs when there was an evaluated version of those (annoying bug,
but not a crashing one).
- old address of previously evaluated IDs that no longer exists in the
depsgraph (causing the crash from the report e.g.).
This commit adds an extra step at the end of nodes building, that goes
over all of already existing IDs in the depsgraph to check whether they
do one of the two things above, and tag them for COW update if so.
NOTE: This only affects depsgraph (re-)building, not its evaluation.
This remains consistent with the fact that operations that may change
the depsgraph content (like Collection exclusion etc.) need to trigger a
rebuild.
NOTE: Performances: Worst case scenarii, like (un-)excluding a whole
character collection in a production file, lead to 5% to 10% extra
processing time in depsgraph building. Most of it comming from extra COW
processing (in depsgraph's update in `build_step_finalize`), the detection
loop itself only accounts for 1% to 2% of the whole building time.
Maniphest Tasks: T85752
Differential Revision: https://developer.blender.org/D10907
This node can change all faces that use a specific material to use a
different material. Using this node is significantly more efficient
than creating a selection from all faces with a specific material
index and then using the Material Assign node.
Ref T88055.
Differential Revision: https://developer.blender.org/D11325
Share the pointer with the original mesh instead, this matches behavior
of all other objects edit-mode data.
Duplicating the edit-mesh pointer makes updates to edit-mesh require
a COPY_ON_WRITE update, which is currently an expensive operation
(copying the entire mesh).
Notes:
- This change is from 802027f3f8
so the edit-meshes object pointer `BMEditMesh.ob` referenced the COW
version of the object. This pointer has since been removed, so the
copy is no longer needed.
- Having a separate edit-mesh pointer could be used so linked duplicates
could have their own generated meshes. For this to be supported,
many other changes would be needed: see D10920.
This patch adds wavelength node support to Eevee, similar to how
Eevee Blackbody node works, thus it is a little off from Cycles.
Reviewed By: #eevee_viewport, fclem, brecht
Differential Revision: https://developer.blender.org/D11326
Previously, the "follow path constraint" and "follow parented curve"
were clamped. This restriction was lifted in rBcf2baa585cc8
Add back an option to get the old behavior in the "Path animation" settings.
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D11263
Since version 2.80, the annotations of the Scene strip were not displayed in VSE. Also, the UI panel was`Grease Pencil` and must be `Annotation`
The problem was the offscreen render hasn't evil_CTX and the section of the annotation was never called.
Differential Revision: https://developer.blender.org/D11329
Make `CMAKE_OSX_DEPLOYMENT_TARGET` independent of buildbot settings and
always set to `OSX_MIN_DEPLOYMENT_TARGET`. That fixes the launch error
on OS older than buildbot's.
Remove unused `MACOSX_DEPLOYMENT_TARGET`.
Fix T88419
Diff D11323
Since there is a special callback for assigning the name from the
search box, and the callback doesn't call an operator or something
else that would do an undo push, I think the solution is to do it
manually here.
Another option would be adding the button flag "UI_BUT_UNDO", which
isn't set by default for search buttons, but that gives us ugly names for
the undo steps, so an explicit push is better in this case.
Differential Revision: https://developer.blender.org/D11190
When activated in modal, `translate`, `resize`, `rotate`, `shear` and
`edge_rotate_normal` use a different orientation than the set in scene.
This orientation needed to match since some of these modes can be switched
during operation.
The default orientation for these modes was `V3D_ORIENT_VIEW`.
And this changed when finishing the `translate` and `resize` to
`V3D_ORIENT_GLOBAL`.
But this could cause inconsistencies when inputting values from the
keyboard.
The solution now is to change the orientation when you change the mode.
---
Note: Although the user can expect the value entered to reflect the
orientation set in the scene, it would require a lot of changes and would
not be really useful.
Use bone rotation order to compute the baked rotation. This fixes a bug
introduced in rB0e85d701c654, where the object rotation order was
applied to the bone.
Maniphest Tasks: T88359, T86193
Reviewed By: sybren, GuiltyGhost, #animation_rigging
Differential Revision: https://developer.blender.org/D11282
This node is similar to the Value and Vector node.
It just provides a way to use the same material in multiple nodes
without exposing it outside of a node group.
Differential Revision: https://developer.blender.org/D11305
This adds a new Material Assign node. It can be used to change the
material used by an existing mesh or to assign a material to a mesh
that has been generated from scratch.
Differential Revision: https://developer.blender.org/D11155
This fixes the `Apply Modifier` and `Visual Geometry to Mesh` operator
when a modifier changed materials on the evaluated geometry.
This is necessary since rB1a81d268a19f2f1402f408ad1dadf92c7a399607.
Differential Revision: https://developer.blender.org/D11303
The old geometry nodes evaluator was quite basic and missed many features.
It was useful to get the geometry nodes project started. However, nowadays
we run into its limitations from time to time.
The new evaluator is more complex, but comes with new capabilities.
The two most important capabilities are that it can now execute nodes in
parallel and it supports lazy evaluation.
The performance improvement by multi-threading depends a lot on the specific
node tree. In our demo files, the speedup is measurable but not huge. This
is mainly because they are bottlenecked by one or two nodes that have to be
executed one after the other (often the Boolean or Attribute Proximity nodes)
or because the bottleneck is multi-threaded already (often openvdb nodes).
Lazy evaluation of inputs is only supported by the Switch node for now.
Previously, geometry nodes would always compute both inputs and then just
discard the one that is not used. Now, only the input that is required
is computed.
For some more details read D11191, T87620 and the in-code documentation.
Differential Revision: https://developer.blender.org/D11191
This feature of `select_side_of_frame` was disabled by removing option
from operator property enum but functional code was never removed.
Add back option to use this feature.
Feature was disabled due to keymap issue. Currently this feature doesn't
have keymap assigned.
Due to misunderstanding of how strip duplication works, animation data
was duplicated on all strips when any strip was split.
`SEQ_sequence_base_dupli_recursive()` duplicated data on strip that was
being split, and `SEQ_ensure_unique_name()` duplicated animation on all
strips.
Only duplication should be done with `SEQ_ensure_unique_name()` and only
on right side split strips, because only these strips are duplicated.
Fix issue described in T87678, which was partially a bug and partially
change in intended(at least as far as I can tell) behaior.
Function `evaluate_seq_frame_gen` that was partially responsible for
filtering strips in stack for rendering wasn't working correctly.
Intended functionality seems to be removing all effect inputs from stack
as it is unlikely that user would want these to be blended in. However
there was logic to exclude effects placed into same input, which because
of weak implementation caused, that any effect input, that is effect as
well will be considered to be part of stack to be blended in.
This bug was apparently used to produce effects like glow over original
image.
Even though this is originally unintended, I have kept this logic, but
I have made it explicit.
Another change is request made in T87678 to make it possible to keep
effect inputs as part of stack when they are placed above the effect,
which would imply that blending is intended. This change is again
explicitly defined.
Whole implementation has been refactored, so logic is consolidated
and code should be as explicit as possible and more readable.
`must_render_strip function` may be still quite hard to read, not sure
if I can make it nicer.
Last change is for remove gaps feature code - it used same rendering
code, which may be reason why its logic was split in first place.
Now it uses sequencer iterator, which will definitely be faster than
original code, but I could have used `LISTBASE_FOREACH` in this case.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11301
Recently `SEQ_sort()` function was split so functionality is provided
on per-seqbase basis. After discussion about this split, it turned out,
that per-seqbase operation is only that should be provided, because
RNA API functions need to be able to access arbitrary seqbase
Remove recently introduced function `seq_sort_seqbase` and change
`SEQ_sort` function to operate on seqbase.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11297
After this commit, all geometry node "init" and "update" functions are
at the top of each file, right below the "layout" function. This means
you can always scroll to the bottom of the file to see the entry point,
and the boring boilerplate code is grouped in one section.
With this patch you will be able to add and remove attributes from curve
data inside of geometry nodes. The following is currently implemented:
* Adding attributes with any data type to splines or spline points.
* Support for working with multiple splines at the same time.
* Interaction with the three builtin point attributes.
* Resampling attributes in the resample node.
The following is not implemented in this patch:
* Joining attributes when joining splines with the join geometry node.
* Domain interpolation between spline and point domains.
* More efficient ways to call attribute operations once per spline.
Differential Revision: https://developer.blender.org/D11251
These seem to be causing some stability issues, and really are just not that
useful in practice. Compiling them is slow already, so it does not improve
the user experience much to show an AO preview if it's not nearly instant.
Textures may be important to be able to identify an object. They are also a way
to make many objects look more like when rendered with an advanced render
engine, without being that expensive.
So this seems like a simple way to increase usefulness of the automatic
previews.
While this function should (currently) not be called on linked ID, there
is no reason to treat those differently than local IDs, for the part
that they have in common: needs to be properly sorted.
`id_sort_by_name` would simply not deal properly with linked IDs, could
lead to mixing IDs from different libraries, and unsorted IDs within the
same library.
Note that while sorting of local IDs is fine, currently sorting of
linked IDs is a total unpredictable failure.
Next commit will fix this, ensuring that linked IDs are grouped by their
library, and properly name-sorted within this library group.
This patch turns off the creation of file thumbnails for files that are
offline and therefore not fully-present on the file system. These types
of files - typically cloud-based or stored on slower backup media -
only have their contents available when actually accessed, at which
point there will be a short delay. If we allow thumbnail creation in
this state then all offline files in a folder will be downloaded just
to view a listing, which can take a long time.
Files in this state will instead get a more generic thumbnail that
still indicates file type (icon in center) and that shows offline state
will a special icon at the bottom-left.
Although this currently only affects Windows users, most of this patch
is platform-agnostic. So other platforms inherit this behavior if they
only add FILE_ATTR_OFFLINE attribute to files in this state.
See D11101 for more information.
Differential Revision: https://developer.blender.org/D11101
Reviewed by Julian Eisel
Fix T88167.
Caused by {rB97defd9cd79b6e3ed0e52481a7078107dbe0522b}
`(BLI_rcti_isect_pt` used here to confirm if cursor position is in between active region boundary.
Subtracting min region boundary from the mouse position before the check, fails the condition.
`mval[2]` introduced to hold the region relative mouse position.
Reviewed By: Severin
Maniphest Tasks: T88167
Differential Revision: https://developer.blender.org/D11224
Changes output for geometry info node in Eevee to be consistent with Cycles (w/o osl)
Before this patch Eevee outputs Z-tangent even for hair. This patch changes it to output hair tangent (growth direction). Hair tangent is impossible to derive otherwise from normal or view direction.
Reviewed By: fclem, brecht
Differential Revision: https://developer.blender.org/D10841
This commit allows that the evaluated geometry of an object has
different materials from the original geometry. This is needed
for geometry nodes.
The main thing that changes for render engines and exporters
is that the number of material slots on an object and its geometry
might not match anymore. For original data, the slot counts are
still equal, but not for evaluated data.
Accessing material slots though rna stays the same. The behavior
adapts automatically depending on whether the object is evaluated.
When accessing materials of an object through `BKE_object_material_*`
one has to use a new api for evaluated objects:
`BKE_object_material_get_eval` and `BKE_object_material_count_eval`.
In the future, the different behavior might be hidden behind a more
general C api, but that would require quite a few more changes.
The ground truth for the number of materials is the number of materials
on the geometry now. This is important in the current design, because
Eevee needs to know the number of materials just based on the mesh in
`mesh_render_mat_len_get` and similar places.
In a few places I had to add a special case for mesh edit mode to get it
to work properly. This is unfortunate, but I don't see a way around that
for now.
Differential Revision: https://developer.blender.org/D11236
This is caused by lacking of consideration of
OB_DUPLICOLLECTION in updateDepsgraph() in the
modifier.
Reviewed by: Antonio Vazquez (antoniov)
https://developer.blender.org/D11292
Splitting of effect strip alone wasn't handled properly. Previously
this resulted in duplicating effect strip, and it was broken at least
from 2.79.
Change in rB8ec6b34b8eb2 was intended to allow splitting strips
individually, so it can be used as RNA API function but also so it
requires as little glue logic as possible.
This is fixed by splitting all dependent strips at once in 2 separate
ListBases for left and right strips. Strips can be finally moved into
original `ListBase`.
With this fix it is still possible to split strips individually with
little glue logic. RNA API function could return list of split strips
as well, currently at least one strip in chain will be provided so
chain can be reconstructed on python side.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10209
Python API function Sequence.move_to_meta() did delete effect chain
when strip with effects was moved.
Use iterator API to query effect strips and move whole chain to meta.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11206
Includes update for OpenVDB file IO, i.e. fixes an issue with
compression flag combination that resulted in random segfaults.
Other changes: Cleanup and formatting.
Read and write generated coordinates (also known as "original
coordinates", "reference coordinates", or "orcos") from and to Alembic.
A custom geometry property named "Pref" is used for (hopefully)
interoperability with Maya and Houdini. For now it's only guaranteed for
Blender-to-Blender.
Export: writing generated coordinates is optional (on by default).
Import: generated coordinates are always read whenever the reading of
vertex data is enabled.
Manifest Task: T88081
Copying an ID outside of BMain should not assume that the datablocks it
uses are now directly linked. This would be wrong e.g. in case that new
no-main ID is copied from a linked data-block and is supposed to remain
a linked data.
Value of the size argument in `strncat` is too large, might lead to a
buffer overflow.
Change the argument to be the free space in the destination buffer
minus the terminating null byte.
Introduced in 5368859a66
Reviewed By: Sergey
Differential Revision: https://developer.blender.org/D11289
The BlenderSync will do quite a bit of work on every sync_data() call
even if there is nothing changed in the scene. There will be early
outputs done deeper in the call graph, but this is not really enough to
ensure best performance during viewport navigation.
This change makes it so sync_data() is only used when dependency graph
has any update tags: if something changed in the scene the dependency
graph will know it. If nothing changed there will be no IDs tagged for an
update in the dependency graph.
There are two weak parts in the current change:
- With the persistent data there is a special call to ignore the check
of the dependency graph tags. This is more of a safety, because it is
not immediately clear what the correct state of recalc flags is.
- Deletion of objects is detected indirectly, via tags of scene and
collections.
It might not be bad for the first version of the change.
The test file used: {F10117322}
Simply open the file, start viewport render, and navigate the viewport.
On my computer this avoids 0.2sec spend on data_sync() on every
up[date of viewport navigation.
We can do way more granular updates in the future: for example, avoid
heavy objects sync when it is only camera object which changed. This
will need an extended support from the dependency graph API. Doing
nothing if nothing is changed is something we would want to do anyway.
Differential Revision: https://developer.blender.org/D11279
- Used try/except instead of a poll function.
- The error case referenced a non-existent error handling module.
Prefer poll functions over exception handling where possible,
also having an operators logic in a try block isn't good practice
as it can hide more serious errors in the code.
Note that duplicate pencil settings access should be moved into a
utility function. This can be part of a separate cleanup.
Resolve ownership ambiguity with shared physics pointers.
Previously, LIB_ID_CREATE_NO_MAIN allowed pointer sharing with
the source ID so physics caches can be shared between original and
evaluated data: (Object.soft.shared & Object.rigidbody_object.shared).
This only worked properly for LIB_TAG_COPIED_ON_WRITE ID's,
as LIB_TAG_NO_MAIN can be used in situations where the original ID's
lifetime limited by it's original data.
This commit adds `LIB_ID_COPY_SET_COPIED_ON_WRITE` so ID's only share
memory with original data for ID's evaluated in the depsgraph.
For all other uses, a full copy of physics data is made.
Ref D11228#287094
lookups
We use the schema so that we can access top level attributes as well.
This is already done for polygon meshes and curves, so this only
modifies the behavior for subdivision objects.
Expand is not expected to update the visibility state of the PBVH, only
the Face Sets IDs. If visibility updates are made accidentally, PBVH
rendering breaks.
In order for this to work properly, the following fixes are needed:
- Expand should always check for active component before attempting to
modify a Face Set ID
- Expand should always check the visibility state on original_face_sets, as
it is the array that contains the visiblilty state that corresponds with the
current state used for PBVH rendering. This implies that after any modification
done by Expand, the visibility state of ss->face_sets and
expand_cache->original_face_sets should match (like in any other tool that
does not modify visibility).
- Expand should never modify the Face Set ID of a poly that is hidden in
expand_cache->original_face_sets.
- When deleting an ID, hidden Face Sets should be skipped when picking IDs for
content filling. This avoids introducing hidden IDs back into the visible
geometry even after updating its visibility state.
Reviewed By: JulienKaspar, JacquesLucke
Maniphest Tasks: T88230
Differential Revision: https://developer.blender.org/D11243
Treat a missing <diffuse> the same as a black diffuse color.
The easiest way to see this bug is with a Collada shader like
```
<constant>
<emission>
<color sid="emission">1 0 0 1</color>
</emission>
</constant>
```
The Collada spec says this should be just
```
color = <emission>
```
ie. red everywhere. The importer slots the red into the Principled Emission socket, but since it leaves the Base Color as the default off-white, this is added to red, and the material looks white-pink in the light and red only in the shadows.
Putting black in the Base Color makes it look red everywhere.
D10939 will also eliminate the much-less-noticeable specular term for this case.
Reviewed By: gaiaclary
Differential Revision: https://developer.blender.org/D10941
Collada shaders with black <specular> should import with Specular=0.
(A missing <specular> is the same as black.)
The general specular conversion is hard, but this case is common and easy.
Fixes the specular for all <constant>/<lambert> shaders, and <blinn>/<phong>
shaders with black/omitted <specular>. Before this they all looked too "shiny".
Reviewed By: gaiaclary
Differential Revision: https://developer.blender.org/D10939
This is giving too bright pixel values, as the sample scaling and random number
sample are wrong. The proper fix for this is complicated. It will be solved in
Cycles X, for now we disable this combination.
Contributed by Intel. On some scenes like classroom with particular integrated
GPUs this speeds up rendering 1.97x. With other benchmarks and GPUs it's
between 0.99-1.14x.
Combining location, rotation and scale channels into a matrix is
a standard task, so while it is easily accomplished by constructing
and multiplying 3 matrices, having a standard utility allows for
more clear code.
The new constructor builds a 4x4 matrix from separate location,
rotation and scale values. Rotation can be represented as a 3x3
Matrix, Quaternion or Euler value, while the other two inputs
are vectors. Unneeded inputs can be replaced with None.
Differential Revision: https://developer.blender.org/D11264
No real functional changes.
When `i` is zero, `filelist_cache_previews_push` was called twice with
the same icon.
This caused the preview to be computed twice when only once is needed.
Before, the camera parameters were calculated only for first frame.
If the camera is animated, these values need to be recalculated in order to get the new camera view position and export the strokes as expected.
Also fixed the export of PDF when the view is not in camera view. PDF export, needs to be done in camera view.
This patch introduces non linear sliders. That means, that the movement
of the mouse doesn't map linearly to the value of the slider.
The following changes have been made.
- Free logarithmic sliders with maximum range of (`0 <= x < inf`)
- Logarithmic sliders with correct value indication bar.
- Free cubic sliders with maximum range of (`-inf < x < inf`)
- Cubic sliders with correct value indication bar.
Cubic mapping has been added as well, because it's used for brush sizes
in other applications (Krita for e.g.).
To make a slider have a different scale type use following line in RNA:
`RNA_def_property_ui_scale_type(prop, PROP_SCALE_LOGARITHMIC);`
or:
`RNA_def_property_ui_scale_type(prop, PROP_SCALE_CUBIC);`
Test the precision, step size and soft-min if you change the scale type
of a property as it will feel very different and may need tweaking.
Ref D9074
Since spline data is stored separately for each spline, the data often
needs to be flattened into a separate array. It's helpful to have the
necessarily-sequential part of that split off into a separate method.
I've found myself using functions like these in quite a few places.
Adds internal API for creating and managing OpenXR actions at the
GHOST and WM layers. Does not bring about any changes for users since
XR action functionality is not yet exposed in the Python API (will be
added in a subsequent patch).
OpenXR actions are a means to communicate with XR input devices and
can be used to retrieve button/pose states or apply haptic feedback.
Actions are bound to device inputs via a semantic path binding
(https://www.khronos.org/registry/OpenXR/specs/1.0/html/xrspec.html#semantic-path-interaction-profiles),
which serves as an XR version of keymaps.
Main features:
- Abstraction of OpenXR action management functions to GHOST-XR,
WM-XR APIs.
- New "xr_session_start_pre" callback for creating actions at
appropriate point in the XR session.
- Creation of name-identifiable action sets/actions.
- Binding of actions to controller inputs.
- Acquisition of controller button states.
- Acquisition of controller poses.
- Application of controller haptic feedback.
- Carefully designed error handling and useful error reporting
(e.g. action set/action name included in error message).
Reviewed By: Julian Eisel
Differential Revision: http://developer.blender.org/D10942
This was a bug uncovered by rB50782df42586.
Previously, the lightcache was always discarded between redraw and forced
to be updated again.
Now we check for update inside the render loop making it compatible with
accumulation motion blur and long exposure.
This was caused by the slight focus gather not being wide enough
for small radii. Now the cast to int will properly round the radius to
the nearest integer.
This is related to T86244 Black Artefacts in EEVEE on Transparent BSDF
This was caused by the bokeh LUT being sampled outside the valid range.
But `texelFetch` is only valid if the sample actually exists. This lead to
undefined behavior.
The fix is to increase `DOF_MAX_SLIGHT_FOCUS_RADIUS` (which just offsets the
LUT along the X=Y axis) to avoid any sample outside the defined range.
operator
This is only used when the preset is set to 'Custom', make that clear in
the tooltip and disable editing the value if another preset is used.
Issue came up in T88155.
Maniphest Tasks: T88155
Differential Revision: https://developer.blender.org/D11210
effect
The way it is now, `ClothVertex->mass` is setup once for the clothObject
and then reused if it already exists [so does not change across frames/
steps] which happens in`cloth_from_object` / `do_init_cloth`, where
`SIM_cloth_solver_init` / `SIM_mass_spring_set_vertex_mass` are called
and set up masses in `Implicit_Data`.
Seems possible to update `ClothVertex->mass` every step in
`do_step_cloth`, however it seems more involved to update the masses in
`Implicit_Data` there as well. The masses from `Implicit_Data` are
accessed in many places, so it would be mandatory to have these masses
kept up-to-date (and even then it is unclear if the solver was designed
to work with these animated or if there are assumptions about this being
stable across the sim).
So propose to remove the (broken/not implemented) animation capabilities
on the property instead.
Maniphest Tasks: T88188
Differential Revision: https://developer.blender.org/D11225
This code in the geometry set header was not directly related to
geometry sets, it makes more sense in the attribute access header.
This makes it clearer that code for geometry components uses attribute
code, rather than the other way around. It also allows adding more
functionality to `BKE_attribute_access.hh` that depends on these things
without including `BKE_geometry_set.hh` there.
The code incorrectly used the size of the second to last segment rather
than the last segment's size. That was a problem when the last segment
is a vector segment but the second to last isn't.
I also used the opportunity to slightly refactor the control point
offsets cache, making it one longer so it also contains information
about the size of the last segment, simplifying other code.
In {rB266cd7bb82ce}, support for muting links was added. It might be
debatable if we define a shader as "having" displacement even if the link
is muted, but after said commit, shader_has_displacement() would return
true but still leave the returned node as NULL.
Now also return false if the link is muted (otherwise the caller would
need to additionally check the returned node as well.)
Maniphest Tasks: T88234
Differential Revision: https://developer.blender.org/D11256
Now the operators work like other areas of Blender using the list of selected objects.
Also, the name has been changed to:
```Layers:
- Copy Layer to Selected
- Copy All Layers to Selected
Materials:
- Copy Material to Selected
- Copy All Materials to Selected```
Reviewed By: mendio, pablovazquez, pepeland
Differential Revision: https://developer.blender.org/D11216
This module exposes the platform utils defined in the GPU module in C.
This will be useful for porting existing code with `bgl` to `gpu`.
Reviewed By: fclem, brecht, campbellbarton
Maniphest Tasks: T80730
Part of D11147
This module exposes the capabilities defined in the GPU module in C.
This will be useful for porting existing code in `bgl` to `gpu`.
Reviewed By: fclem, brecht, campbellbarton
Maniphest Tasks: T80730
Part of D11147
Code would still create an object (without setting up materials), code
for removing unused material slots would then freeze.
Now return/cancel early in case of empty selection.
This came up in T88269 [which is still not fully fixed, transforming
curve edit points clear their GP_STROKE_SELECT flag which now results in
the early exit, should be looked at separately]
Maniphest Tasks: T88269
Differential Revision: https://developer.blender.org/D11252
The term direction was used in 3 different ways in screen editing code,
making it hard to follow:
- 0-3 for as magic numbers mapped to [west,north,east,south].
- `h`, `v` characters for [horizontal,vertical] axes.
- Cycle direction SPACE_CONTEXT_CYCLE_PREV, SPACE_CONTEXT_CYCLE_NEXT
The following changes have been made:
- Add `eScreenDir` for [west,north,east,south], use variable name `dir`.
- Add `eScreenAxis` for [horizontal,vertical] values, use variable name
`dir_axis`.
- Add `eScreenCycle` for existing enum `SPACE_CONTEXT_CYCLE_{PREV/NEXT}`.
- Add macros `SCREEN_DIR_IS_VERTICAL(dir)`,
`SCREEN_DIR_IS_HORIZONTAL(dir)`.
Replacing `ELEM(dir, 1, 3)`, `ELEM(dir, 0, 2)`.
- Move `ED_screen_draw_join_highlight`, `ED_screen_draw_split_preview`
to `screen_intern.h`.
Reviewed By: Severin
Ref D11245
This allows extra options (in-front and stroke order) to be shown when adding line art kind of grease pencil object.
Reviewed by: Antonio Vazquez (antoniov)
Diff: https://developer.blender.org/D11130
- Matches changes in Python 3.x dictionary methods.
- Iterating now raises a run-time error if the property-group changes
size during iteration.
- IDPropertyGroup.iteritems() has been removed.
- IDPropertyGroup View & Iterator types have been added.
- Some set functionality from dict_keys/values/items aren't yet
supported (isdisjoint method and boolean set style operations).
Proposed as part of T85675.
There is a new Texture data-block socket that we can use in Geometry
Nodes now. This commit replaces the texture property of a node and
gives it a texture input socket instead. That increases flexibility.
The texture socket still has some limitations that will be lifted in the
next couple of days (e.g. it's not supported by the switch node and
cannot be exposed the a modifier yet).
Differential Revision: https://developer.blender.org/D11222
This fixes a few "obvious" places where we do unnecessary updates.
Those special cases were added in the early days of geometry nodes
when many updates were missing and we tried to get it to work at all.
There is a fairly high risk that with this change some required updates
will be missing again. Those can be fixed when we find thme.
Some of the update issues might have been fixed by rB58818cba40794905f9323080e60884e090f2d388
and similar changes we added over time.
Differential Revision: https://developer.blender.org/D11238
Improve the "In Betweens" tools:
- Push Pose from Rest Pose
- Relax Pose to Rest Pose
- Push Pose from Breakdown
- Relax Pose to Breakdown
- Pose Breakdowner
These all now use the same new sliding tool:
- Actual visual indication of the blending/pushing percentage applied.
- Mouse wrapping to allow for extrapolation without having to worry
about the initial placement of the mouse. This also means these tools
are actually usable when chosen from the menu.
- Precision mode by holding {key Shift}.
- Snapping to 10% increments by holding {key Ctrl}.
- Overshoot protection; by default the tool doesn't allow overshoot
(lower than 0% or higher than 100%), and it can be enabled by pressing
{key E}.
- Bones are hidden while sliding, so the pose itself can be seen more
clearly. This can be toggled by pressing {key H} while using the tool.
Reviewed By: #animation_rigging, zeddb, sybren, #user_interface, brecht, Severin, looch
Maniphest Tasks: T81836
Differential Revision: https://developer.blender.org/D9054
Sculpting tools are designed to ignore hidden geometry and behave like
hidden geometry does not exist.
When getting the neighbors of a vertex, now this takes into account
hidden geometry to avoid returing neighbors which connected edge is not
visible. This should make corner cases of a lot of tools work properly,
especially when working in low poly meshes when is common to have a
single face loop hidden.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D11007
This issue originates from a missing BVH packing for visibility data
when it is modified.
To fix this, this adds update flags to the managers to carry the
modified visibility information from the Objects' modified flag to the
GeometryManager.
Another set of flags is added to determine which data need to be packed:
geometry, vertices, or visibility. Those flags are then used when
packing the primivites.
Reviewed By: brecht
Maniphest Tasks: T87929
Differential Revision: https://developer.blender.org/D11219
When using a tool that is not a brush, the previously used brush
preset will still be active in the tool settings, so the cursor will
draw its custom reviews.
This checks if the current active tool is a brush before drawing its
previews. If it is not a brush tools, it draws a default white cursor.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9418
This is very similar to rB5613c61275fe6 and rB0061150e4c90d, basically
just exposing a `VMutableArray` method to its generic counterpart. This
is quite important for curve point attributes to avoid a lookup for
every point when there are multiple splines.
An emission texture is currently connected to the Base Color socket. It should connect to the Emission socket, like a constant does.
Reviewed By: gaiaclary
Differential Revision: https://developer.blender.org/D10990
link->multi_input_socket_index, which is used to calculate the links
position on the multi-input socket, was not set.
Now it is set to the sockets current link count.
Review: Jacques Lucke (JacquesLucke)
Differential Revision: https://developer.blender.org/D11082
Heterogeneous lookup is useful when constructing a key in a
map/set is relatively expensive (e.g. `std::string`). When doing
lookups in the map/set, one usually does not want to construct
the type to avoid overhead. Instead, heterogeneous lookup
allows for using a different type (such as `StringRef`) as key.
This change makes it easier to implement heterogeneous
lookup for custom types. Before, one had to specialize
`blender::DefaultHash`. Now, one just has to implement
a `static uint64_t hash_as(value)` on the type itself.
One still has to provide the equality operator in addition
to the hash function of course.
Before, any usage of tbb wrappers used in modifier code would
just fall back to the non-threaded non-tbb version.
We ran into this issue a couple of times in patches.
Sometimes it is useful to find the key that compares equal
to a known key. Typically that happens when the key itself
has additional data attached that is not part of its hash.
Note that the returned key reference/pointer is const, because
the caller must not change the key in a way that changes its
hash or how it compares to other keys.
Unavailable sockets should generally be ignored during evaluation.
They mainly exist because we don't have a better mechanism to turn
some sockets on/off depending on node parameters.
Currently, it is still possible that a link connects an available with an
unavailable socket. This link is not displayed in the ui and should
generally be ignored.
Previously, multiple threads adding information to node ui storage
at the same time resulted in memory corruption. The lock prevents
that, but might potentially become a bottleneck in the future.
For now favour correctness over a potential performance bottleneck.
'Preferences' is the term used elsewhere in Blender so this commit makes
the option more consistent.
In the future, the "default" target could be changed to something more
descriptive.
The new "Close Area" operator can let any neighbor replace the area to
be closed. This patch improves the selection of the best, and most-
aligned, neighbor. It maximizes the ratio of the shared edge lengths,
rather than minimize the absolute amount of misalignment. This follows
our expectations closer because it takes into account the relative
sizes of the areas and their edges.
see D11143 for details and examples.
Differential Revision: https://developer.blender.org/D11143
Reviewed by Campbell Barton
When disk cache path is same as blend file path, with Unix-like systems
blend file can be overwritten by disk cache directory.
This was caused by `BLI_delete(path, false, true)` when path points to
file. On Windows this would result in error message and file would not
be deleted. On Linux, file is deleted and then overwritten with cache
directory.
To further minimize chance of removing blend file, append disk cache
path with `_seq_cache` suffix.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11217
Byte images used `ibuf->float_colorspace` as source colorspace.
This was oversight - `ibuf->rect_colorspace` should be used as source
colorspace.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11223
In e1f3996d74, logic for changing metastrip start and end frame based
on contained strips was removed. This was done intentionally and
incorrect functionality wasn't noticed as drawing code reflected
seemingly correct state.
Original code was mostly correct, because meta strip doesn't store its
internal start and end points. This code was restored with minor
modifications so function `SEQ_time_update_sequence()` is fully self
contained as it is used not only by transform operator.
In addition, drawing glitches that happen when meta content is outside
of meta boundaries were fixed. These glitches were not caused by
e1f3996d74.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11215
Not allowing external direct access to the vector of splines in the
curve will help for things like reallocating custom data when a spline
is added or removed.
* Set colors for the new texture and material sockets
* Material uses the same color used for shading icons
* Texture uses a plum color desaturated enough to not be confused with Vector's violet
* Image socket adjusted to be closer to Texture sockets but darker
* Integer socket toned down in saturation to not stand out so much
(and be closer to float sockets which are gray)
Making this change now during bcon1 to gather feedback from the community,
and because Geometry Nodes needs to use the new texture/material sockets.
This commit exposes the first spline control point attributes. The
implementation incorporates the attributes into the virtual array
system, providing efficient methods to flatten the data into a
contiguous array and to apply changes from a flattened array. This
is only part of the eventual goal, which includes changes to run
attribute nodes separately for each spline to completely avoid copying.
So far `tilt` and `radius`, the two generic attributes common to
all spline types, are implemented. The more complex `position`
attribute is also added. It requires some special handling for Bezier
splines, where the control point handles need to be moved along with
the control points. To make that work I also added automatic handle
recalculation to the Bezier spline.
Differential Revision: https://developer.blender.org/D11187
This was caused by the drivers not optimizing the shader enough to remove
the samplers and data used by closure eval. Removing the lighting loops
from the depth shader fixes the perf regression.
With Constrain to Image Bounds selected, UVs will be constrained to the
correct/closest UDIM if the image is tiled.
UVs will be constrained to the 0-1 UV space if the image is not tiled.
This will override the present behavior of always constraining selected
UVs to the 0-1 UV space (UDIM 1001).
Reviewed By: campbellbarton
Ref D11202
The sockets are not exposed in any nodes yet.
They work similar to the Object/Collection sockets, which also
just reference a data block.
This is part of D11222.
Was causing calculation issues later on in the kernel.
This change catches the most obvious case: missing attribute. The old
code was trying to set tangent to 0, but because it was transformed as
a normal it got converted to non-finite value. This change makes it so
that no transform is involved and 0 is written directly to the SVM
stack.
To cover all cases it will require using safe_normalize() in this node
and in the normal transform function. This is more involved change from
performance point of view, would be nice to verify whether we really want
to go this route.
I've left asserts in the BSDF allocation functions. Don't have strong
connection to them, but think they are handy and are not different from
having an assert in the path radiance checks.
Differential Revision: https://developer.blender.org/D11235
It is possible that BSDF allocation will advance pointer in the
allocation "pool" but will return null pointer if the weight is
too small.
One artist-measurable issue this change fixes is random issues
with denoising: normal pass for denoising could have accessed
non-initialized normal of a closure.
Differential Revision: https://developer.blender.org/D11230
When activated in modal, `translate`, `resize`, `rotate`, `shear` and
`edge_rotate_normal` use a different orientation than the set in scene.
This orientation needed to match since some of these modes can be switched
during operation.
The default orientation for these modes was `V3D_ORIENT_VIEW`.
And this changed when finishing the `translate` and `resize` to
`V3D_ORIENT_GLOBAL`.
But this could cause inconsistencies when inputting values from the
keyboard.
The solution now is to change the orientation when you change the mode.
---
Note: Although the user can expect the value entered to reflect the
orientation set in the scene, it would require a lot of changes and would
not be really useful.
Extracts `nlasnapshot_blend_get_inverted_upper_snapshot()` from
`BKE_animsys_nla_remap_keyframe_values()`
This introduces a new struct member:
`NlaEvalChannelSnapshot->remap_domain` and marks which values of
`blended_snapshot` are processed for remapping/used-for-inverting.
Effectively, it marks which values have successfully been remapped and
can be further used for remapping.
`nlasnapshot_blend_get_inverted_upper_snapshot()`:
output snapshot `r_upper_snapshot` has each channel's `remap_domain`
written to which effectively marks the successfully remapped values.
The only reason a value is not in the remap domain is if inversion
failed or it wasn't marked to be remapped.
`..get_inverted_upper_snapshot()` has a variant `nlasnapshot_blend()`
from {D10220}, but this patch doesn't depend on it at all. A third
variant will later be added `..get_inverted_lower_snapshot()`.
Altogether, these three functions allow solving for any of
(lower_snapshot, upper_snapshot, blended_snapshot) given the other two.
The function `..get_inverted_lower_snapshot()` will also similarly
process the remap domain of the blended and lower snapshot.
added assertions within `nlasnapshot_blend()` and
`..get_inverted_upper_snapshot()` to future proof branches dealing with
blendmode and mixmodes. (suggested by sybren)
No user functional changes
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D10222
This turns links red if no implicit conversion can be made between the
from socket and the to socket. For geometry nodes this happens with
object, geometry, collection, and string sockets that are connected to
a different type. The change is simply implementing a callback that is
already implemented for other node tree types.
Differential Revision: https://developer.blender.org/D11229
Add translation/rotation/scale parameters for custom bones shapes. The
new scale is a 3D vector `custom_shape_scale_xyz`, and replaces the
`custom_shape_scale` float.
Reviewed By: #animation_rigging, sybren, zeddb
Differential Revision: https://developer.blender.org/D10974
Previously we had a lot merge conflicts since we always put the most
recently added node at the bottom. By sorting the list we will have
one fewer merge conflict when a node is added in most cases.
The id-property iterator referenced a PyObject pointer without
increasing it's user count - allowing for errors if the value
goes out of scope during iteration.
Similar to how `GVArray_For_VArray` implements `materialize_impl` to
forward the work to its non-generic virtual array, we can do the same
thing for the mutable version, `GVMutableArray_For_VMutableArray`.
This commit should have no visible changes, since as far as I can tell
the only user of this class does not implement special materialize
methods anyway.
This enables the overlay for instanced geometry.
After this change, objects that are an instance of the current active
object (which are also being modified in the current active mode) won't
fade, which is different from the previous behavior.
Reviewed By: fclem
Maniphest Tasks: T82155
Differential Revision: https://developer.blender.org/D9362
When checking if the mesh has only one Face Set only the current active
component for expand needs to be checked. Otherwhise other components
that won't be modified by Expand that contain other IDs will be taken
into account, making the Face Set deletion go into an infinite loop.
Reviewed By: JacquesLucke
Maniphest Tasks: T88060
Differential Revision: https://developer.blender.org/D11169
Update the "current value" of the Shape Key blend amount when value is
not within the min/max range. New function `rna_ShapeKey_update_minmax`
used to update and clamp the current value.
Reviewed By: mano-wii, lichtwerk, #animation_rigging, sybren
Maniphest Tasks: T54339
Differential Revision: https://developer.blender.org/D11071
When a scene uses cryptomatte the viewport rendering would lead to a
memory leak. The reason was that all image renders (viewport+final)
activated cryptomatte. But is only used for final rendering.
This patch only activates cryptomatte when doing final rendering.
The Cycle-Aware Keying option was added in 2.8 and is used
to allow keyframing over cyclic F-Curves without disturbing
the cycle (e.g. overwriting an end keyframe updates both ends).
This effect is not limited to auto keyframing and is applied
to any key insertion, but when the popovers were rearranged
it was put in the Auto-Keyframing related one for some reason.
This is misleading, especially since because of that the
option is incorrectly greyed out when auto keyframing is
disabled, so move it to the generic Keyframing popover.
Differential Revision: https://developer.blender.org/D11213
Was giving a warning:
```
BKE_spline.hh:293:35: warning: 'interpolate_to_evaluated_points' overrides a
member function but is not marked 'override' [-Winconsistent-missing-override]
```
Mistake in {rBe48c4d73d378}.
Was using the vertex index as a lookup for the loop color (instead of
the loop index).
(Issue was not present in original D1429 btw).
Maniphest Tasks: T88145
Differential Revision: https://developer.blender.org/D11212
These variables and methods should make it easier to loop through buffers elements/pixels. They take into account single element buffers.
Single element buffers can be used for set operations to reduce memory usage.
Usage example: P2078
Reviewed By: #compositing, jbakker
Differential Revision: https://developer.blender.org/D11015
This allows extra options (in-front and stroke order) to be shown when adding line art kind of grease pencil object.
Reviewed by: Antonio Vazquez (antoniov)
Diff: https://developer.blender.org/D11130
The last point of the output was at the same location as the
first point of a cyclic spline. The fix is simple, just account for
the cyclic when choosing the sample edge length, and don't
hard code the last sample.
The spline `length` function assumed that the curve always had evaluated
edges. That is clearly false. This commit adds a check to `length` and a
special case for a single point in the curve resample node.
This commit uses two changes to improve the performance of the point
instance node.
**Prevent Reallocations**
At 64 bytes, the transform matrix for every instance is rather large,
so reallocating the vector as it grows can become a performance bottle-
neck. This commit reserves memory for the instances that will be added
to prevent unecessary reallocations as the instance vector grows.
In a test with 4 million instances of 3 objects in a collection, the
node was about 40% faster, from 370ms to 270ms for the node.
**Parallelization**
Currently the instances are added by appending to a vector. By changing
this slightly to fill indices instead, we can parallelize the operation
so that multiple threads can fill data at the same time. Tested on a
Ryzen 3700x, this reduced the runtime from the above 270ms to 44ms
average, bringing the total speedup to ~8x.
Note that displaying the instances in the viewport is still much slower
than the calculations in node, this change doesn't affect that.
This patch refactors the instance component to make use of the earlier
refactoring in rB4599cea15dcf. Now we don't have to build an array of
instance references the size of the point domain, and we can gather the
possible instances only once and use the same vector for all component
types. Generally the node should be a bit faster and use less memory.
The logic is moved around a bit, especially the hashing of the ID
attribute to pick from the instance list, but the result is unchanged.
Differential Revision: https://developer.blender.org/D11203
Those were mostly just left over from previous work on particle nodes.
They solved the problem of keeping a reference to an object over
multiple frames and in a cache. Currently, we do not have this problem
in geometry nodes, so we can also remove this layer of complexity
for now.
We need to always add a single point to the last cyclic segment that
completes the loop, because that includes the starting point of the
evaluated edge. The existing code forgot about that point.
This node generates a naturally parametarized (even length edge) poly
spline version of every spline in the input. There are two modes,
"Count", and "Length". These are similar to the same options for the
line primitive node in end points mode.
I implemented this instead of a "Sample Points" node, because for this
operation it's trivial to keep the result as a curve, which is nice
since it increases flexibility, and because it can make instancing
simpler, i.e. using the transforms of each evaluated point rather than
requiring the construction of a "rotation" attribute.
Differential Revision: https://developer.blender.org/D11173
Now it's possible to append materials of one grease pencil object into another one. The operator allows active material or all materials.
Also, the Layer Copy To Object has been renamed to Layer Append to Object to keep consistency and now allows to append all layers at once.
Small addition inspired by [this tweet](https://twitter.com/Vorundor/status/1390645286624763909) of a user in a situation I also saw myself in the past.
Showing "(Clipped)" next to the view name in the `Text Info` overlay fits well since it's a per-viewport setting.
{F10059921, size=full}
While on Local view:
{F10059925, size=full}
Multiple viewports:
{F10059946, size=full}
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D11193
Avoids having frames with the word "Frame" on top, resulting in less visual noise.
(users were working this around by adding a space as label name).
Differential Revision: D11193
There need to be more cleanup for ffmpeg 4.5 (ffmpeg master branch).
However this now compiles on ffmpeg 4.4 without and deprication
warnings.
Reviewed By: Sergey, Richard Antalik
Differential Revision: http://developer.blender.org/D10338
We were not assigning the amount of sound channels to the output frames.
Newer ffmpeg releases has sanity checks in place and doesn't fall back
to two channels anymore.
This adds `parallel_for` to the Attribute Curve Map node to improve performance.
Grain size set to 512.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D11194
this is a followup to rB2bd85d9cc623, we cannot forcefully delete
obsolete overrides of object data (meshes etc.), as this implies also
deleting their user object, which might still be a perfectly valid
override, albeit in conflict regarding its obdata ID pointer...
This is the opposite of previous code, which would keep those
'deprecated' overrides arround (often in a dedicated collection), when
they were detected as user-edited.
While this is a safe-ish way to (try to) preserve user-edited data, this
tends to add too much 'trash' data to production scenes, which cleaning
becomes a burden.
Note that user will get warnings in thos cases, and can always choose
not to save the current blend file and go fix the library issue instead.
Code detecting overrides which reference linked data is missing was
actually missing many cases, leading to too much garbage data being kept
around after resync process.
This iterator design provides means to create simple and flexible API
to query and work with collection of strips. It should be used in cases
when conditions require multiple stages of recursive iteration of all
strips or similar complex scenarios.
Quick API overview:
Basic queries are standalone functions that return SeqCollection
Use SEQ_collection_create() and SEQ_collection_free() to construct
such query functions.
Use these functions to get strips of known conditions, like selected
strips, movie strips, muted strips and so on.
Use SEQ_reference_query() when querying strips with relation to
some reference strip. For example to get its effects, strips that have
same type or use same input file and so on.
These aren't standalone functions because often you need to query strips
relative to each strip in collection.
Use SEQ_collection_expand() to query strips relative to each strip
in collection. These will be merged to original collection.
Use SEQ_collection_merge() to merge 2 collections
To iterate collection elements use macro SEQ_ITERATOR_FOREACH()
This API is quite specific, but I think it is best suited for tasks
that are usualy solved in sequencer codebase.
Old sequencer iterator has been completely removed.
SEQ_ALL_BEGIN and SEQ_ALL_END macros re-use new iterator design.
As initial use for this iterator select_grouped_effect_link()
function has been rewritten. It was not only broken, but also it used
DNA fields to aid iterating strips.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10337
Instead of only drawing images on first start, load them into cache.
This resolves a logical problem when images don't load fast enough,
where the animation would load some frames each time until all images
loaded into cache.
In practice this could play back with severe frame skipping many times
times before all images were loaded making playback smooth.
Part of a fix for T81751.
Originally colorspace of float images was converted using CPU.
GLSL will render images much faster.
Originally image was converted to `global_role_default_byte` space,
disregarding view transform and also display device, which now is
possible to specify. These parameters could be set via commandline to
settings used in Blender, however if they are to be set by users, these
needs to be sanitized.
Right now defaults are assumed for device given for
`COLOR_ROLE_DEFAULT_BYTE`. This should produce same behavior as
implemented before.
Together with D11167 animation player performance should be much better.
This code was mostly copy-pasted from sequencer.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11178
This node has the same functionality as the color and vector curve
mapping nodes in the shader editor. Here is works on every value for
the selected attribute, and it can also output a float value. Other
than that, the implementation is quite straightforward-- almost
completely boilerplate code.
Differential Revision: https://developer.blender.org/D10921
Mode switching passed through when the mode wasn't supported for all
modes except particle edit-mode.
Add a check to ED_object_mode_compat_test to prevent the error message.
The check to include particle edit mode in the object-mode drop-down
didn't match the poll function to edit particle edit mode.
Share the check between both functions.
This option should always be available. Even if it does not affect the
current object depending on its mode, it affects the rest of the geometry
of the scene.
The rest of the options also work this way. For example, a grease pencil
object does not have face orientation, but the ovelay option is still
there for the rest of the scene.
Reviewed By: JulienKaspar, HooglyBoogly
Maniphest Tasks: T83398
Differential Revision: https://developer.blender.org/D10215
Fix trying to use cross product on parallel vectors.
Fix intersection checks failing because we run into floating point
issues with very small numbers.
One of current annoying limitations of Blender re Collections/Objects is
that objects are forbidden to not be instantiated in at least one
collection.
Code ensuring that as a pst-processing step of override creation/resync
operations would be a bit too eager to add those objects to an external
'ad-hoc' collection, which poses several issues (both in term of keeping
the scene well organized, and related to override hierarchy handling).
So now be very conservative and only generate and use external 'storage'
collection for those objects when it is absolutely mandatory.
In pratice, it means this should never happen anymore on any decently
organized data source.
Caused by {rB0d9f79b163ee}.
IDP_SyncGroupTypes was now syncing from src to src (leading to
unexpected operator properties).
Assume this is rather critical, dont know the part of the code well, but
above commit clearly shows a change from 'dest->data.group' to 'src-
>data.group' which shouldnt be there.
Maniphest Tasks: T88030
Differential Revision: https://developer.blender.org/D11171
When the user hovered over a number input field, pressed Enter and then
typed in '0', confirming the input would always cancel the action. This
is because in this particular case `ui_textedit_begin` is called
instead of `ui_numedit_begin`. This function will not set
`data->startvalue` (leaving it at `0`) which will then trigger the
cancel in `ui_apply_but_NUM` which checks if the input changed (by
comparing the entered value with `data->startvalue`).
The fix makes sure that when `ui_textedit_begin` is called on a number
button, the `data->startvalue` is set correctly like in
`ui_numedit_begin`.
Breaking commit: rBSeb06ccc32462beaacbb114d6d0e450b6fc911047
Note: This also affects pressing tab to move to a new number field and
entering '0'. The fix will also cover this case.
Reviewed By: Severin, #user_interface
Maniphest Tasks: T88058
Differential Revision: https://developer.blender.org/D11168
Export UV maps to Alembic on every frame. This makes the export of UV
maps consistent with mesh normals. In the case of static UV maps it may
cause a slight slowdown (since they're exported on every frame now), but
due to the deduplication performed by the Alembic library, the resulting
files will be the same size anyway.
Thanks to @CodyWinch for providing the solution to the problem, and
writing the original patch D8397.
Differential Revision: https://developer.blender.org/D8397
The tooltips for the tracker buttons were all equal (because they all
use the same operator).
This adds the `get_description` operator callback to the
`CLIP_OT_track_markers` operator and returns a more descriptive
tooltip for the different buttons.
Reviewed By: mont29
Maniphest Tasks: T87983
Differential Revision: https://developer.blender.org/D11145
While rB6b18678e34bf did the correct updates, it did it a bit early (not
covering all possible node tree changes).
Now do the ntreeUpdateTree() at the very end of the material import
instead.
Thx @scurest investigating.
Maniphest Tasks: T86314
Differential Revision: https://developer.blender.org/D11159
`SEQ_recursive_apply` and `SEQ_seqbase_recursive_apply` were incorrectly
refactored into `iterator.c` file, but they aren't part and don't use
sequencer iterator.
Functions are moved to `utils.c` file.
Partial fix for T81751 which exposes multiple playback performance
issues. Previously the cache was limited to 30 frames, without a way to
increase the cache for smooth playback with files that are slow to load.
Now the animation plays back smoothly once loaded into cache.
The cache limit from the system preference is used
when the player is launched from Blender.
A new player argument `-c <cache_limit>` was added to support this.
The `file.execute` operator would early-exit because the mouse wasn't hovering
the file list. Caused by 4ba9d7d71e.
Although simpler solutions would have been possible, I decided it's better to
split add a new operator for executing based on the mouse (for double-clicking
files), to separate that from the window level execute operator
(`file.execute`). This allows more control and we can get rid of the implicit
assumption that the keymap would call `file.select` on mouse-press, and
`file.execute` on double-click, for the double-click behavior to work. The cost
is that we execute the file selection & activation logic twice on the
double-click, but that shouldn't be an issue at all.
Also removes the `need_active` property from the `file.execute` operator.
That's ancient and wasn't implemented well anyway.
To be clear, reason this fixes the bug is that `file.execute` works entirely
with the `execute()` callback now and doesn't early-exit based on the mouse
position anymore.
Might trigger warnings about the `need_active` property not being found for
custom keymaps. These can be ignored and the property can safely be removed
from the keymap. I don't expect other keymap breakages.
This was caused by the SSR option resetting the accumulation. But the
render passes were only cleared in the init phase. This means that
when SSR was resetting the `taa_render_sample` the actual renderpasses
would still contains 1 sample. This means the renderpasses were always
divided by the wrong number of samples.
The fix is to clear just before accumulation if the sample is 1.
The fact that it works for motion blur is kind of a blessing. This is because
we check `stl->effects->ssr_was_valid_double_buffer` before resetting the
sampling. So this only happens on the first motion step and does not affect
the rest of the rendering.
Differential Revision: https://developer.blender.org/D11033
This artifact was already present in previous version but was hidden
by the faulty SSS scale.
The issue comes from the translucence using the geometric normal
(computed using fragment shader derivative) leading to poor precision at
depth discontinuity.
Replacing using the same geometric normal reconstruction as the ambient
occlusion pass removes most of the issue.
This was caused by the SSR option resetting the accumulation. But the
render passes were only cleared in the init phase. This means that
when SSR was resetting the taa_render_sample the actual renderpasses
would still contains 1 sample. This means the renderpasses were always
divided by the wrong number of samples.
The fix is to clear just before accumulation if the sample is 1.
The fact that it works for motion blur is kind of a blessing. This is
because we check stl->effects->ssr_was_valid_double_buffer before
resetting the sampling. So this only happens on the first motion step
and does not affect the rest of the rendering.
Reviewed by: jbakker
Differential Revision: https://developer.blender.org/D11033
The render session is keeping track of the scene update, which includes
kernel loading time.
This fixes negative render times reported when CUDA kernels are compiled
at runtime.
A bit fragile logic, can be re-implemented using some user-counted
scope utility classes, so that only outer-most time skip is applied.
Not all python-defined ID properties are overridable (yet), this needs
to be detected by libquery 'foreach id' code, such that those ID
pointers can be ignored by override code when working on override
hierarchies.
Fixes part of the issues found while investigating studio files (namely,
some py-defined ID pointer properties from rigify that are not currently
overridable would cause issues and false detections during resync).
Move the detection/decision of whether an ID pointer should be taken
into account in library override hierarchy processing to the LibQuery
area of code, by introducing a new callback flag.
This allows to factorize the test logic, be explicit in liboverride code
about ID relationships that can be ignored when exploring the override
hierarchy, and adds the possibility to do more checks about pointers to
be tagged as non-overridable in the future.
Note that all but the 'special' ID pointers (loop-back, embedded, etc.)
should be overridable. If some is not, relevant IDType 'foreach_id'
callback code is reponsible to tag it properly.
Python-defined IDProperties however are not systematicaly overridable
(yet), so this should allow us to detect that case and act accordingly
in an incomming commit.
No behavioral change expected in this commit.
Each frame display would add an item to the cache limiting list
without checking if it was already in the list.
Limiting would then free image buffers when the length of the list
exceeded USE_FRAME_CACHE_LIMIT (currently 30).
In practice this meant short animations would free and reload
frames during playback.
In some cases, users start video editing work from General template,
where Filmic view transform is chosen by default. Currently, this causes
issue when working with sRGB footage, which are not properly decoded
into linear working space and final render looks miscolored.
When adding first strip, check it's colorspace and if it corresponds to
colorspace for byte images, ensure that view transform is set to
default value, which is Standard.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D11151
Match the output to the prefilled bug report script's output.
Make the output file self-contained.
Reviewed By: lichtwerk
Differential Revision: https://developer.blender.org/D11144
This patch makes the spline tilts (interpolated to the evaluated points)
affect the evaluated normals, allowing manual control of the rotation of
each profile in the curve to mesh node.
The method is based on Animation Nodes code, which keeps the data in
direction vector form, and rotates around the tangent vector.
Differential Revision: https://developer.blender.org/D11152
While the method of interpolating based on the curve length at each
evaluated point may be useful in some situations, for now it's best to
be consistent with the existing methods in Blender, so this commit adds
a simple linear-based-on-resolution sampling method to bezier splines.
The special case for the interpolation to the last point was being used
for every point in the last segment, because of the rounding. Instead,
make the function slightly more complicated to properly handle the
correct interolation in the cyclic and non-cyclic cases.
Some discard of vertbuf were not correctly followed by discards of
the GPUBatches that were using them. This lead to a use-after-free
situation where GPUBatches would reuse old VBO information. This did
not crash immediatly because the VBO indices were cached by our VAO
caching system. It kept working on some implementation because VBO
reference in the VAO (probably) preventing the VBO from being freed
by reference counting.
This fixes T85977 NVidia: Random crashes in 'DrvPresentBuffers'
The little chevron tab to open a hidden region wouldn't show up in the
Spreadsheet editor. Cause was an incorrect GPU-scissor usage:
While drawing regions, the scissors should be kept enabled, just the
scissor rectangle should be updated - and afterwards reset to what it
was before.
The little chevron tab to open a hidden region wouldn't show up in the
Spreadsheet editor. Cause was an incorrect GPU-scissor usage:
While drawing regions, the scissors should be kept enabled, just the
scissor rectangle should be updated - and afterwards reset to what it
was before.
Reports would change the active emboss of the Block, to make some of its
buttons appear without background. But it didn't reset it so that
buttons added afterwards wouldn't use the correct embossing.
Internally, when using Fill brush a dilate of the filled area was done, but this was hardcoded to 1 pixel.
In some situations, this was not enough, so now the value is accesible in the UI and can be set with different values.
Also, as this value is more used than `Leak Size`, the new Dilate is on Topbar, and Leak Size has been moved to Advanced panel.
In my previous patch https://developer.blender.org/D10171 some code changing the direction the strokes normal was accidentally included. This patch reverts that back to the original normal calculation.
Reviewed By: #grease_pencil, antoniov
Differential Revision: https://developer.blender.org/D11148
Mark NLA/FCurve modifier properties as library-overridable.
It was already allowed to add such modifiers to a library-overridden
object, but then the properties of those modifiers were read-only,
limiting their use.
After copying NLA tracks from one `AnimData` to another, also ensure
that the `AnimData::act_track` and `AnimData::actstrip` pointers are
pointing to the copy rather than the original.
This is a necessary step to allow library overrides on NLA modifiers
without crashing Blender.
The remapping of the pointers is done by looping over the tracks/strips
and comparing pointers. Alternatively, I could update the copy functions
themselves to keep track of those pointers and return them, but IMO that
would produce more spaghetti (they're also used in cases where this
pointer-remapping is not desired).
All changes:
* Include `file.pack_libraries` and `file.unpack_libraries` to the menu
[1].
* Rename "Pack Blender Libraries" → "Pack Linked Libraries" [2].
* Rename "Unpack Blender Libraries" → "Unpack Linked Libraries" [2].
* Rename "Pack All Into .blend" → "Pack Resources" [3]
* Rename "Unpack All Into Files" → "Unpack Resources" [3]
* Rename "☑ Automatically Pack Into .blend" → "☑ Automatically Pack
Resources" [3]
* Rename "Make All Paths Relative" → "Make Paths Relative" [4]
* Rename "Make All Paths Absolute" → "Make Paths Absolute" [4]
* Add separators accordingly
---
[1] - This was never exposed since its original commit rB16411da41e40.
Now that operator not listed in menus don't
show up in the search, this became even more hidden.
[2] - The original name (Pack Blender Library) was not clear enough.
Pose Libraries and Asset Libraries are also technically Blender
libraries.
[3] - The term All was misleading since it didn't include the Linked
Libraries.
[4] - No need to use "All". It is not used in the Report/Find Missing
Files either.
This commit put this in the File > External Data menu.
Differential Revision: https://developer.blender.org/D11109
Text data block were not considered special in the recursive purge
function. So they would get deleted if they had no actual users.
To fix this we instead make text data block use "fake user" so that
addon authors can specify script files that should be removed if nothing
is using it anymore.
Per default, new text object have "fake user" set. So functionality
wise, the user has to explicitly specify that they want the text object
to be purge-able.
Reviewed By: Bastien
Differential Revision: http://developer.blender.org/D10983
Text data block were not considered special in the recursive purge
function. So they would get deleted if they had no actual users.
To fix this we instead make text data block use "fake user" so that
addon authors can specify script files that should be removed if nothing
is using it anymore.
Per default, new text object have "fake user" set. So functionality
wise, the user has to explicitly specify that they want the text object
to be purge-able.
Reviewed By: Bastien
Differential Revision: http://developer.blender.org/D10983
The main goal of this refactor is to not store Object/Collection
pointers for every individual instance. Instead instances now
store a handle for the referenced data. The actual Object/Collection
pointers are stored in a new `InstanceReference` class.
This refactor also allows for some better optimizations further down
the line, because one does not have to search through all instances
anymore to find what data is instanced.
Furthermore, this refactor makes it easier to support instancing
`GeometrySet` or any other data that has to be owned by the
`InstancesComponent`.
Differential Revision: https://developer.blender.org/D11125
This patch adds initial curve support to geometry nodes. Currently
there is only one node available, the "Curve to Mesh" node, T87428.
However, the aim of the changes here is larger than just supporting
curve data in nodes-- it also uses the opportunity to add better spline
data structures, intended to replace the existing curve evaluation code.
The curve code in Blender is quite old, and it's generally regarded as
some of the messiest, hardest-to-understand code as well. The classes
in `BKE_spline.hh` aim to be faster, more extensible, and much more
easily understandable. Further explanation can be found in comments in
that file.
Initial builtin spline attributes are supported-- reading and writing
from the `cyclic` and `resolution` attributes works with any of the
attribute nodes. Also, only Z-up normal calculation is implemented
at the moment, and tilts do not apply yet.
**Limitations**
- For now, you must bring curves into the node tree with an "Object
Info" node. Changes to the curve modifier stack will come later.
- Converting to a mesh is necessary to visualize the curve data.
Further progress can be tracked in: T87245
Higher level design document: https://wiki.blender.org/wiki/Modules/Physics_Nodes/Projects/EverythingNodes/CurveNodes
Differential Revision: https://developer.blender.org/D11091
There was a function to set 2 pixels wide for inverse filling, but this must not be done in the borders of the image.
Now, the borders are checked before set 2 pixels.
Reported for ops.transform.vertex_warp and ops.transform.vertex_random.
Polling will check with ED_transverts_check_obedit, if we know it will
fail e.g. for pose mode, we can do the same check in the UI already.
Maniphest Tasks: T87926
Differential Revision: https://developer.blender.org/D11128
Using scene frame 1 is not reliable in cases when there is a
frame offset is involved. Using frame 1 seems more reliable,
although might still fail under certain circumstances.
More reliable fix would require a deeper change in the data
structure and the logic about frame loading and size detection.
The issue was caused by frame start/offset change triggering clip
reload, which was happening with a hardcoded scene frame index of 1,
which could be outside of the actual clip frames.
Solved by removing source change tag from the frame start/offset
update. The source doesn't really change: the resolution will stay
the same, as well as media type, its duration. So the tag was not
needed.
This precomputes vertex normals in the procedural and caches them in case none
are found in the archive. This only applies to polygon meshes, as subdivision
meshes are yet to be subdivided, so it is useless to do this computation.
The goal here is to speed up data updates between frames, as computing normals
shows up in profiles even for large objects. This saves around 16% of update time
for a production file.
This splits the data reading logic from the AlembicObject class and moves it to
separate files to better enforce a separation of concern. The goal was to simplify
and improve the logic to read data from an Alembic archive.
Since the procedural loads data for the entire animation, this requires looping
over the frame range and looking up data for each frame. Previously those loops
would be duplicated over the entire code causing divergences in how we might
skip or deduplicate data across frames (if only some data change over time and
not other on the same object, e.g. vertices and triangles might not have the
same animation times), and therefore, bugs.
Now, we only use a single function with callback to loop over the geometry data
for each requested frame, and another one to loop over attributes. Given how
attributes are accessed it is a bit tricky to simplify further and only use a
ingle function, however, this is left as a further improvement as it is not
impossible.
To read the data, we now use a set of structures to hold which data to read.
Those structures might seem redundant with the Alembic schemas as they are
somewhat a copy of the schemas' structures, however they will allow us in the
long run to treat the data of one object type as the data of another object
type (e.g. to ignore subdivision, or only loading the vertices as point clouds).
For attributes, this new system allows us to read arbitrary attributes, although
with some limitations still:
* only subdivision and polygon meshes are supported due to lack of examples for
curve data;
* some data types might be missing: we support float, float2, float3, booleans,
normals, uvs, rgb, and rbga at the moment, other types can be trivially added
* some attribute scopes (or domains) are not handled, again, due to lack of example
files
* color types are always interpreted as vertex colors
Workaround for crash when accessing FaceMaps / PaintMask data in
editmode, just disallow access in editmode as is done with UVs.
Same fix as in {rB3e2619b3e72a}.
Maniphest Tasks: T87969
Differential Revision: https://developer.blender.org/D11146
Initial report was mentioning the Classroom demo scene, but this is
probably because the scene was pre-configured to be used with OpenCL.
Would expect any OpenCL compositing to be failing prior to this fix.
The reason why crash was happening is due to OpenCL queue being
released from OpenCLDevice destructor. Is not that obvious, but
when Vector (including std::vector) is holding elements by value
a destructor will be called on "old" memory when vector capacitance
changes.
Solved by making forbidding copy semantic for compositor devices and
forcing move semantic to be used.
Also use emplace semantic in the devices vector initialization.
This commit significantly speeds up many of the attribute nodes when
multiple threads are available in linear situations when parallelism
cannot be achieved elsewhere.
See the differential for a table of timing comparisons tested on a
Ryzen 3700x. For an attribute with 4 million elements, the nodes were
about 3 to 9 times faster.
The changes are not exhaustive, other nodes could still be parallelized
in the future. Also, it would be possible to further optimize the grain
size in `parallel_for`, but I'd rather make sure it isn't too small.
I tested some different values, but also relied on intuition--
increasing grain size for less complex operations and vice versa.
Differential Revision: https://developer.blender.org/D11139
Currently overriding properties within material node trees is not
supported. However there is a workaround that allows feeding values
through drivers via an intermediate custom property, as described
in T82404. The workaround relies on the behavior of the ID copying
code that always patches datablock self-references even without any
overrides.
Unfortunately, this broke during development of 2.93. This happened
because a call RNA_struct_override_matches added in rB2281db72b0157
detects that no override exists, and 'restores' the self-reference
to point to the original datablock.
To avoid this, mark the Material.node_tree property with the
PROPOVERRIDE_IGNORE flag to stop RNA_struct_override_matches
from recursing into the currently unsupported node tree sub-block.
This flag should be removed when this is properly supported.
This was confirmed to fix the workaround and discussed with @mont29.
Shaders are only compiled if they are used by some other Node (Geometry, Light, etc.).
This usage detection is done before updating the Scene, however it fails at detecting
Shaders used by Procedurals not known to Cycles (e.g. ones defined by third party
applications), as Procedurals are only updated after the shaders are compiled.
To remedy this, we now use the Node reference counting mechanism to detect whether a
Shader is used and therefore should be compiled.
This removes `ShaderManager::update_shaders_used` as it is not needed anymore, however,
since it would also update the Shader ids, this is now performed in
`ShaderManager::device_update`, and a new virtual `device_update_specific` method was
added to handle device updates for SVM and OSL.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D10965
This adds a reference count to Nodes which is incremented or decremented
whenever they are added to or removed from a socket, which will help us
track used Nodes throughout the scene graph generically without having to
add an explicit count or flag on specific Node types. This is especially
useful to track Nodes defined through Procedurals out of Cycles' control.
This also modifies the order in which nodes are deleted to ensure that
upon deletion, a Node does not attempt to decrement the reference
count of another Node which was already freed or deleted.
This is not currently used, but will be in the next commit.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D10965
There was a quadratic algorithm extracting triangles from a coplanar
cluster. This is now linear.
Also found and fixed a bug in the same area related to the triangulator
added recently: it didn't get the right correspondence between new
edges and original edges.
Previously the option in the camera's //Object Data Properties > Viewport Display
> Sensor// would not display the sensor in camera view. This seemed to be caused
by the theme color `TH_VIEW_OVERLAY` having zero set for the alpha channel and
alpha blending being active, resulting in no visible output. Hence
`immUniformThemeColorShade(TH_VIEW_OVERLAY, 100);` is replaced with
`immUniformThemeColorShadeAlpha(TH_VIEW_OVERLAY, 100, 255);`.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11075
Object orientation for thumbnail creation changed to be slightly
oblique (tilted to one side and from above) to better show shape,
especially when axis-aligned. Camera lens changed to 85 to avoid
distortion of close objects like human heads.
see D9940 for details and examples.
Differential Revision: https://developer.blender.org/D9940
Reviewed by Julian Eisel
When saving a file in Edit mode with Multiframe enabled, the render did not include the modifiers.
Now the multiframe is not enabled if it's doing a render.
Resolves occasional glitch/flicker drawing dark buttons in the UI.
Regression in 405a5d3bd7
which removed shader unbinding when the batch is drawn.
GPU_shader_bind could run with the sRGB uniform in an unexpected state.
Reviewed By: fclem
Ref D11124
Multi-overrides of a same linked ID in a same override hierarchy are
currently not supported and can cause all kind of issues.
In some cases they could lead to infinite loop trying to resync the same
ID over and over, this is now prevented.
Found in some Blender studio production files.
Keep track of clog_refs so we can null the pointers when calling
CLG_exit. Otherwise we will run into issues where the code will try to
access freed data.
While it was technically safe to call Map.remove while iterating over
a map, it wasn't really designed to work. Also it wasn't very efficient,
because to remove the element, the map would have to search it
again. Now it is possible to remove an element given an iterator
into the map. It is safe to remove the element while iterating over
the map. Obviously, the removed element must not be accessed
anymore after it has been removed.
This commit adds a new API tha allow to replace the bgl API in the exemples on:
https://docs.blender.org/api/current/gpu.html
**Overview (New API):**
```
gpu.state: active_framebuffer_get
GPUFramebuffer: read_color
GPUOffscreen: texture_color
```
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D11031
Instead of creating different python wrappers for the same GPU object,
return the same `PyObject` created earlier.
This also allows for more secure access to existing GPU objects.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D11044
The formula used to compute the bend did subtraction of two big numbers
to get the position. Changed to find the delta and add that,
by rearranging the formula into a more numerically stable form.
Reviewed By: mano-wii, campbellbarton
Ref D11074
Currently there is an "Auto" option for the domain, this commit adds a
similar option for "Auto" data type, that uses the data type from the
target attribute or the source attribute (in that order).
Ref T87347
Differential Revision: https://developer.blender.org/D10932
Rename BKE_object_runtime_free -> BKE_object_runtime_free_data,
since the runtime pointer is part of the object, only the data is freed.
Leave the data cleared to avoid accidental use,
this is in keeping with other `*_free_data()` functions.
None of these generic poll functions had NULL pointer checks,
since all operators that use these functions expect a valid constraint,
modifier .. etc. Add the NULL check to the poll function.
Ref D11126
Reviewed By: mont29, Severin
If no other object was selected while dragging one in (e.g. from the Outliner
or an object asset from the Asset Browser), all visible objects in the active
view layer would get selected.
Issue was caused by a wrong enum type use.
Mistake in bcdba7c34d.
This adds two new methods:
* `clear` just removes all keys from the vector set.
* `index_of_or_add` returns the index of a key and adds it if has not
been added before.
While fa7ddd0f43 fixed the reported issue,
the possibility of reusing runtime data during curve-to-mesh conversion
remained. Instead of treating the bounding-box as a special case,
clear all run-time data for temporary objects.
Ref D11026
Reviewed By: sergey
The term `verify` doesn't fit with what this function does
and is sometimes used to check data is valid or to control validity
checking as with `RNA_define_verify_sdna`.
use more common term `ensure`.
This adds a callback to bNodeTreeType to check which socket types are
valid for the tree type. Function has been implemented for the normal
tree types, and can be implemented for custom node trees with python,
by adding a `classmethod` to the tree. However, only builtin socket
types are supported.
This is relevant for T87049, but it also has the advantage that it is
now clear which node trees support which sockets. Previously this
was assumed to be known by all developers.
Differential Revision: https://developer.blender.org/D10938
This is just linear interpolation, but it's nice to have an equivalent
to `mix3` for only two values. It will be used for interpolation of
values between bezier spline control points.
Currently when you try to convert a Text-object to Grease pencil from the Object-menu or via the operator in some other way, the Text-object is only converted to a Curve.
This commit converts that curve to a Grease pencil object.
Differential Revision: https://developer.blender.org/D11117
BMesh intersect could leave invalid items in the selection list,
causing a crash. The list is now cleared since boolean is such a
destructive operation, it's unlikely the selection order would be useful.
Thanks to @lukastoenne for finding the root cause.
This patch adds a threshold value to the glow effect in color mode.
Currently, the threshold is hardcoded to 5%.
You can select a color and specify a higher threshold to include
similar colors in the effect.
Note: depends on D10670
Reviewed By: #grease_pencil, pepeland
Differential Revision: https://developer.blender.org/D10672
This patch adds the Randomize options that exist in the Array modifier to the offset modifier.
Currently the patch uses
```
BLI_findindex(&gpf->strokes, gps);
```
to get the index of the current stroke for making each stroke a different seed value. This is how the noise modifier also gets the stroke seed value and it is noted there as well that this method is slow, and should be fixed in the future with another method of getting the stroke index.
Other methods were explored such as using the total number of points of the stroke, but that makes the randomize options incompatible with other modifiers before it such as Multiple Strokes, Array, Build, and Simplify.
{F9591325}
Differential Revision: https://developer.blender.org/D10171
Creating a shallow copy is sometimes useful to get a unique ptr
for a virtual array when one only has a reference. It shouldn't
be used usually, but sometimes its the fastest way to do correct
ownership handling.
When renaming a data-block that is an asset, while the asset is visible in the
Asset Browser ("Current File" asset library), the list wouldn't re-sort items,
breaking the alphabetical sorting.
This was easily possible while changing the data-block name throught the Asset
Browser's sidebar, while in the "Current File" asset library.
Sometimes functions expect a span instead of a virtual array.
If the virtual array is a span internally already, great. But if it is
not (e.g. the position attribute on a mesh), the elements have
to be copied over to a span.
This patch makes the copying process more efficient by giving
the compiler more opportunity for optimization.
FLT_EPSILON was added to the threshold when comparing values,
this caused problems selecting similar small faces since the areas
can be very small in this case.
Also increase the displayed precision so it's easier to use
smaller numbers.
- Allow long enums to break early
- Allow long titles to wrap
- Colloapse hlist to few collumns if needed
This fixes a few of the bigger issues, some more tweaks are still needed
in some places
Instead to create only the Blank object, now a new Layer and a simple material is added.
This is a common request of artists.
Reviewed By: mendio, pepeland
Differential Revision: https://developer.blender.org/D11110
The algorithm that calcualted the direction (inside/outside) of the
polyline was not always returing the correct result. This mean that the
polyline was filled "inside-out".
The fix uses the winding number to calculate the inside and outside.
Reviewed By: antoniov, pepeland
Maniphest Tasks: T87718
Differential Revision: https://developer.blender.org/D11054
In some cases functions were defined with arguments of different array
lengths in headers vs. implementations. This commit fixes some of the
cases I ran into, but probably not all of them.
Issue was caused by anim handle being reset by
`DEG_evaluate_on_framechange()`
Preserve anim handle by backing it up in
`blender::deg::SequenceBackup`
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11059
When frame is rendered to file, bilinear interpolation on scaled images
caused blurred edges.
This is fixed by not doing interpolation with pixels outside of source
buffer.
Such fix doesn't cover cropped images which are currently cropped by
filling area of image with black transparent color, because image buffer
has bigger size than visible image area.
This is fixed by offsetting range used in previous fix by amount, that
would correspond to crop distance. Because of this, image area doesn't
even need to be filled with transparency.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11058
This patch allows you to dynamically control stroke's opacity and thickness using an object for distance reference in the modifier. Fading range is adjustable, and it is compatible with current curve/vertex group selection.
Reviewed By: #grease_pencil, antoniov, mendio
Maniphest Tasks: T82177, T80194
Differential Revision: https://developer.blender.org/D9091
When an aligned (or auto) handle was snapped with only the control
point selected, it would not snap to the correct point, but offset. This
was because the handles were not considered selected. The `TD_SELECTED`
flag was not being set.
The fix makes sure that we include the handles in the selection when
the handle is aligned or auto.
Reviewed By: antoniov
Maniphest Tasks: T86881
Differential Revision: https://developer.blender.org/D11111
Fix for the Arc commands (A/a) to successfully parse the 4th and 5th arguments.
Fix for floats without a specified integer part, like `.123`
File for testing:
{F10042021}
Reviewed By: filedescriptor
Differential Revision: https://developer.blender.org/D11099
This was caused by the new depsgraph persistence.
The GPUbatches we got from the cache being the same for each frame
means that we need to be more careful about cleanning the additional
VBOs references.
Moving the `EEVEE_motion_blur_swap_data` function call at the end of
the loop makes sure the references are cleaned.
Mostly the interesting information about the instances IDs whether they
are -1 or not, but it's still worth displaying them in the editor.
In the future when we can hide or show colums, we could decide to hide
this one by default.
Differential Revision: https://developer.blender.org/D11104
WorkScheduler task model deletes work packages after executing them. The other models don't do so. All models should handle packages the same way.
Reviewed By: #compositing, jbakker
Differential Revision: https://developer.blender.org/D11102
WorkScheduler task model deletes work packages after executing them. The other models don't do so. All models should handle packages the same way.
Reviewed By: #compositing, jbakker
Differential Revision: https://developer.blender.org/D11102
Face set visibility is already flushed to all mesh elements in the right
way in SCULPT_visibility_sync_all_face_sets_to_vertices, calling
BKE_mesh_flush_hidden_from_verts is legacy code from the previous
visibility system that was causing the vertex visibility to take
priority over face sets. When hidding a single loop, all vertices of
those faces are still visibile, so this line was tagging all loop faces
visible. This was leaving mesh/face set visibiltiy in an unconsistent
state.
Reviewed By: JacquesLucke
Maniphest Tasks: T87474
Differential Revision: https://developer.blender.org/D11008
These settings are used though for these strokes (see
'paint_stroke_use_dash'), should be visible in the UI as well.
This was correctly added when dashing was introduced in rB15f82278d5d4
btw., but then messed up in rBfb74dcc5d69d.
Maniphest Tasks: T87816
Differential Revision: https://developer.blender.org/D11096
These settings are used though for these strokes (see
'paint_stroke_use_dash'), should be visible in the UI as well.
This was correctly added when dashing was introduced in rB15f82278d5d4
btw., but then messed up in rBfb74dcc5d69d.
Maniphest Tasks: T87816
Differential Revision: https://developer.blender.org/D11096
This was just not implemented for curve strokes when world spacing was
introduced in rB87cafe92ce2f.
Now do the equivalent of what was done in said commit in
'paint_space_stroke', now in 'paint_line_strokes_spacing' as well.
Maniphest Tasks: T87815
Differential Revision: https://developer.blender.org/D11098
This is a first step towards T87620.
It should not have any functional changes.
Goals of this refactor:
* Move the evaluator out of `MOD_nodes.cc`. That makes it easier to
improve it in isolation.
* Extract core input/out parameter management out of `GeoNodeExecParams`.
Managing this is the responsibility of the evaluator. This separation of
concerns will be useful once we have lazy evaluation of certain inputs/outputs.
Differential Revision: https://developer.blender.org/D11085
This is a first version of an Attribute Transfer node. It only supports two
modes for mapping attributes from one geometry to another for now.
More options are planned for the future.
Ref T87421.
Differential Revision: https://developer.blender.org/D11037
Generally, it would be good to not allow this from happening in the
first place but that is quite tricky because an object does not know
which other object instances it. Similar checks might be necessary
in other places, but this fixes the bug already.
Differential Revision: https://developer.blender.org/D11086
This patch fixes the remaining issues described in T87749. The jitter
was caused by inconsistent rounding when using the floats icon_size
and icon_padding to offset the bound for the text drawing. Using
`round_fl_to_int` leads to consistent results and fixes the jitter
that remained in some buttons with icons, UI lists, and breadcrumbs.
Differential Revision: https://developer.blender.org/D11062
The trouble was that there was a context pointer "modifier" in the
property editor context that returned the active modifier. But the
"modifier" variable was already used in many places, for pointers
that are *not* equivalent to the active modifier.
The context pointer for the active modifier was unecessary anyway.
If we need to access a context pointer for the active modifier in the
property editor then we can add it. Until then it only adds confusion.
Counts of less than one weren't allowed in end points mode mostly to
avoid a division by zero when calculating the delta. It's trivial to
allow a count of one, so this commit does that, with the point placed
at the start location.
This is a change split from the geometry nodes curves branch. Since
curve object modifier evaluation happens in this file, moving it to C++
will be quite helpful to support the `GeometrySet` type. Other than
that, the code in the branch intends to replace a fair amount of this
file anyway, so I don't plan to do any further cleanup here.
Differential Revision: https://developer.blender.org/D11078
This allows us to remove a callback from the modifier type info struct.
In the future the these modifiers might just be replaced by nodes
internally anyway, but in the meantime it's nice to unify the handling
of evaluated geometry a bit.
Differential Revision: https://developer.blender.org/D11080
The Outliner was doing a full rebuild of its tree in response to transform
notifiers. I don't see any reason for this, a simple redraw without rebuilding
should be just fine.
The same optimization could be done for other object notifiers, but I'll check
on them separately.
Caused by {rB278011e44d43}.
Framebuffer management since above commit now seems to require region
bind/unbind in for the operator to be able to redraw correctly without
using the same framebuffer in multiple contexts.
Maniphest Tasks: T87771
Differential Revision: https://developer.blender.org/D11084
This fixes T87666 and T83252.
The boolean modifier and geometry nodes can depend on the geometry
of an entire collection. Before, the modifiers had to manually create relations
to all the objects in the collection. This worked for the most part, but was
cumbersome and did not solve all issues. For example, the modifiers were not
properly updated when objects were added/removed from the referenced collection.
This commit introduces the concept of "collection geometry" in the depsgraph.
The geometry of a collection depends on the transforms and geometry of all
the objects in it. The boolean modifier and geometry nodes can now just depend
on the collection geometry instead of creating all the dependencies themselves.
Differential Revision: https://developer.blender.org/D11053
Though to my knowledge we haven't had a report about this yet, this
looks like a clear oversight-- the ids are just more data stored by the
instances component, and should be cleared and copied like other data.
This might have resulted in incorrect random IDs for instances in
renderers in some cases where the component had to be copied.
Correction to Prefs tooltip mention of 'add-ons' folder in Scripts Dir.
Differential Revision: https://developer.blender.org/D11064
Reviewed by Harley Acheson
Removing mid-operation area re-targeting for safety and predictability.
Differential Revision: https://developer.blender.org/D11066
Reviewed by Campbell Barton
Calculation of bounding rect for multi-input socket was wrong.
Reviewer: Hans Goudey (HooglyBoogly)
Differential Revision: https://developer.blender.org/D11077
Calculation of bounding rect for multi-input socket was wrong.
Reviewer: Hans Goudey (HooglyBoogly)
Differential Revision: https://developer.blender.org/D11077
This is convenient because having a uniform interface is nice, and
because of the similarity to "last".
Differential Revision: https://developer.blender.org/D11076
If an object named for example `Suzanne` is converted to Gpencil, a material called `Suzanne_Fill` will be created for the gpencil fill.
When this material already exists, the new material will be called `Suzanne_Fill.001` and the operator will not see that this material is already present the next iteration. This leads to a new material being created for every polygon.
This commit changes the code to search for a material starting with `ObjectName_Fill` instead of being equal to.
Reviewed By: filedescriptor, antoniov
Differential Revision: https://developer.blender.org/D11067
This reverts commit 9cce18a585.
rB9cce18a5858c broke the build in unforeseen ways, not easily fixable.
revert for now, so master will at least build again.
- Re-order freeing so an instances __del__ method runs before the
`ExtensionRNA` has been freed.
- "remove" functions no longer free the gizmo/gizmo-group memory,
needed so the identifier used when freeing the extension
doesn't use the freed identifier.
This patch fixes jittering text when resizing regions of the UI as
described in T87749. The jitter was caused by the text padding
being stored as an integer which lead to inconsistent rounding.
Most notably this patch fixes the jitter in the new spreadsheet editor,
but not all occurrences of jitter described in T87749 (e.g. in UI lists)
are addressed.
Differential Revision: https://developer.blender.org/D11060
Reset the active strip offset and scale, in the "Set Render Size"
operator (`SEQUENCER_OT_rendersize`). This ensures that the active strip
will actually fit the new render size, which is what the operator is
intended to achieve.
This is complex situation. Tagged ID deletion (used to delete several
data-blocks at once) removes IDs to be deleted from Main.
But when we remove deleted IDs' usages of other IDs (using
`BKE_libblock_relink_ex`), some specific post-process is required on
some types, like Collections. Those post-processes would in some cases
rely on data actually being in Main.
That failing condition would lead in existing code on missing processing
the very ID (collection) we were working on, leading to missing removing
some child collection pointers, leading to the crash (later on in
LayerCollection resync process).
For now we go with an optimization & fix that avoids processing all
collections in Main when we actually know which one we are working one
(case of `BKE_libblock_relink_ex`, but not of
`BKE_libblock_remap_locked`).
This is however yet another demonstration of the need to rework that
whole collection/layer resync process, since it is not only extremely
inneficient currently, but it also requires valid Main/ID state way too
deep into the remapping code.
NOTE: This fix may very well not catch/address all possible fail cases
here, dealing with the double parent/child relationships of collections
is challenging...
Issue reported by @eyecandy from the studio, thanks.
In cases where the same node tree is used in different materials with
small changes, the wrong material could be selected.
Cause: Hair shaders GPU resources weren't updated and used the previous bound data.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D11036
If saving a file using CloseSave dialog, do not close if there is an error doing so, like if read-only.
Differential Revision: https://developer.blender.org/D10722
Reviewed by Julian Eisel
The grid plane was drawn too big on retina displays compared to other screens,
because the factor was multiplied by the native pixel-size, which is 2 for
Retina displays.
Makes the functions (introduced in 557b3d2762) follow existing naming
conventions for the API.
Changes:
`bpy.types.ID.mark_asset` to `bpy.types.ID.asset_mark`
`bpy.types.ID.clear_asset` to `bpy.types.ID.asset_clear`
When the user entered a driver expression like `#frame` into a number
field, Blender would crash sometime after. This is because
e1a9ba94c5 did not handle this case properly and ignored the fact
that the user can enter text into the field.
The fix makes sure that we only cancel if the value is a *number* equal
to the previous value in the field.
Note that this could also be handled by `ui_but_string_set` which would
be a bit nicer potentially. However, I was unable to find a clean way of
passing `data->startvalue` into that function. `uiHandleButtonData` is
only known locally inside `interface_handlers.c`.
Reviewed By: Severin
Maniphest Tasks: T87688
Differential Revision: https://developer.blender.org/D11049
Previously we always had to set attribute values after creating
the attribute. This patch adds an initializer argument to
`attribute_try_create` which can fill it in a few ways, which
are explained in code comments.
This fixes T87597.
Differential Revision: https://developer.blender.org/D11045
Because we use virtual classes (and for other reasons), we had to do a
small allocation when simply retrieving the data type and domain of an
existing attribute. This happened quite a lot actually-- to determine
these values for result attributes.
This patch adds a simple function to retrieve this meta data without
building the virtual array. This should lower the overhead of every
attribute node, though the difference probably won't be noticible
unless a tree has very many nodes.
Differential Revision: https://developer.blender.org/D11047
The code of the snapping system to interact the objects in the scene only
considers instances what comes from "DUPLI" objects.
This commit adds instances coming from Geometry nodes.
Differential Revision: https://developer.blender.org/D11020
Speed effect caused, that some raw frames are re-used for multiple
final frames. When cached final frame is freed due to memory being
full, it tried to free also lower level cached frames that were used
during compositing. Some lower level cached frames were already freed
by different final frame and `BLI_ghash_remove()` failed.
Check if key still exists in hash or if linked keys were overwritten
before removing them.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10909
Under some circumstances, modifiers are evaluated more than once.
One time to compute the actual output geometry and another time
with `MOD_APPLY_ORCO`. This design probably has to be revisited
at some point in the context of geometry nodes. However, that would
be much more involved than a bug fix.
The issue was that during the second evaluation, the node tree is
evaluated based on a slightly different input geometry. The data
generated during the second evaluation overwrote the cached
data from the first evaluation, resulting in incorrect data that is
shown in the spreadsheet.
The fix for now is to simply not log any data in the second evaluation.
Add a keying set that includes location, rotation, scale, and custom
properties.
The keying set is intentionally not based on the "Whole Character"
keying set. Instead, it is generic enough to be used in both object and
pose animation, making it possible to quickly switch between animating
characters and props without switching keying sets.
This is, according to @rikkert, what the Blender Studio animators need
99.9% of the time.
The `bisect_distance` in the mirror modifier was hard-coded to `0.001`.
This would result in some unexpected behavior like vertices close
to the mirror plane being deleted or merged.
The fix now adds a parameter to the mirror modifier to expose the
bisect distance to the user. The default is set to the previous
hard-coded value to not "change" previous files.
Ref D10201
When cache is strip is invalidated, movie file was reloaded even if it
isn't necessary. This caused significant performance issues when strip
is being dragged under playhead.
This was caused by calling `SEQ_relations_sequence_free_anim()` and it
was introduced as fix for T36124.
When it is necessary to reload file because another API holds reference
to ImBuf, do this explicitly besides cache invalidation.
In `rna_ColorManagedColorspaceSettings_reload_update()` this was already
done, so no change is needed there.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11024
Math for drawing font over byte buffer was incorrect. Effect can be seen
when target buffer is fully black and transparent - this results in font
color being effectively premultiplied, which causes problems when image
is composited further.
Use `blend_color_mix_byte()` and `blend_color_mix_float()` for blending.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11035
Camera object used for rendering reffered to original not evaluated data.
Use `DEG_get_evaluated_object()` to get evaluated camera.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11039
Was showing a simple confirm dialog, even if the file didn't contain
unsaved changes. The confirm dialog would also show up when choosing
"Restore Last Session" from the splash screen right after startup, which
is weird.
Instead show the proper file closing dialog that allows saving, but only
if there are actually unsaved changes.
Always use the defaults here (radius, depth etc), since desired bounds
have been set interactively, it does not make sense to use a different
value from a previous command.
The Cube tool has already seen a fix for this in rB26e5718e29a7, but
Cone/UVSphere/Cylinder/IcoSphere havent.
Maniphest Tasks: T87677
Differential Revision: https://developer.blender.org/D11038
The UV factor of the last point of a cyclic stroke was using the factor of
the first point leading to unwanted scaling artifacts.
The fix sets the uv factor of the last point to the currect value (last UV
factor + length between last and first point).
Reviewed By: antoniov, fclem
Maniphest Tasks: T86968
Differential Revision: https://developer.blender.org/D10850
Properties Editor is a bit more picky (compared to the Outliner for
example) when it comes to listening to grease pencil notifiers -- it
requires the action to be set.
So when adding the notifier in the dopesheet from the channels (done in
`achannel_setting_flush_widget_cb`), now add the `NA_EDITED` action.
Maniphest Tasks: T87640
Differential Revision: https://developer.blender.org/D11025
Some curve modifiers (namely Hook, SoftBody and MeshDeform) can only work
on pre-tesselated spline points.
Before the modifier UI refactor in rB9b099c86123f, users would get the
'Apply on Spline' option, but disabled and with a tip explaining why
this cant be changed. After rB9b099c86123f though, this button was
always enabled [but disfunctional] leaving the user without an
explanation why this has no effect.
Now restore this functionality since it is quite important information.
Additionally, this button now appears to be ON in these cases which
makes more sense from the user perspective (so it does not represent the
actual setting on the modifier -- this would internally be switched ON in
the modifier calculation anyways though, see
'curve_get_tessellate_point')
Differential Revision: https://developer.blender.org/D11029
Adds `mark_asset()` and `clear_asset()` to ID data-blocks, e.g.
`bpy.context.active_object.mark_asset()`. They essentially do the same as the
mark and clear asset operators.
Scripts are generally discouraged from using operators where possible, but we
need to provide API functions to use instead. In this case it means scripts
don't have to override context to pass an ID to the operator.
This was caused by the closure refactor. The radiance being masked
for SSR, we need to not enable SSR when trying to render the specular
color pass.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11028
Move code common to the Whole Character keying sets ("Whole Character" and
"Whole Character (Selected Bones Only)" into a mix-in class. This avoids
the need to use direct assignments like
`poll = BUILTIN_KSI_WholeCharacter.poll`.
No functional changes.
Dragging a number button, then holding the value and pressing escape
would not reset the value correctly.
This was because eb06ccc324 assumed that `data->value` and
`data->startvalue` were set during dragging which they are not.
The fix moves the if statement into the section where we check if a
number was entered (number edit) making sure that we only cancel
if the button was in "string enter" mode and that the value entered
was the same as before.
Reviewed By: HooglyBoogly, Severin
Maniphest Tasks: T87637
Differential Revision: https://developer.blender.org/D11021
If a new action is created (e.g. by inserting keyframes), the header was
not garuanteed to display the right action.
Notifiers were fine here, redraw took place, the editors action was just
not set soon enough for the drawing.
Now make sure this is set correctly by ensuring the animation context is
right (same as the other editor regions do before drawing).
Maniphest Tasks: T86809
Differential Revision: https://developer.blender.org/D10796
Increase range of internal flags & order UI_SEARCH_FILTER_NO_MATCH
within this range, so public button flags aren't accidentally added
that overlap with internal flags.
Python scripts can now define the reason it's poll function fails using:
`Operator.poll_message_set(message, ...)`
This supports both regular text as well as delaying message creation
using a callback which should be used in situations where constructing
detailed messages is too much overhead for a poll function.
Ref D11001
For indirect light rays, don't assume any hit is opaque, rather if it has
transparency or emission do the shading but don't do any further bounces.
Naturally this is slower when there are transparent surfaces, however
without this cutout opacity doesn't give sensible results.
Differential Revision: https://developer.blender.org/D10985
Some persistent data code was disable due to a deeper design issue, which
meant some updates were not communicated to renderers.
Dependency graph updates work in two passes, once where Blender scene
animation updates are done, then app handler scripts can run to make further
scene modifications, and then the depsgraph is updated again to take those
into account.
Previously the viewport would update renderers twice when such app handler
scripts were present. Now both viewport and persistent data rendering update
the renderers only once, accumulating updates from both passes.
The function applying the search used the dummy search info for when
the item doesn't exist even when there was no UI data associated with
the node at all.
A fix is to only add the search menu when there is attribute info
stored for the node. This is something I wanted to do anyway, since
it makes it look more purposeful when there are no attribute info
for a node, less like a bug.
Differential Revision: https://developer.blender.org/D11016
The problem is that each uiBlock needs to be assigned a unique name,
but when there can be multiple modifiers of the same type, we use the
panel sort order for the unique part of the string. However, the most
recent test file has 1200+ panels in the property editor, so 4
characters isn't enough for a unique string.
That's not a situation I expected, but it makes sense, because we don't
remove legacy panels with unused types when loading old files. So they
tend to accumulate a bunch of unused panels. That's why this works fine
with a new property editor, it doesn't all of the extra old panels.
These panels must be stored for the expansion status and order, but
arguably we could cull unused panels on save. However, simply increasing
the length of the unique panel string is a valid fix in this situation.
In the future, we can look into removing unused panels when saving.
Previously, clicking into a number field, changing nothing and then
clicking outside the field again would trigger an update (RNA prop
would be set to the same value again). This could potentially cause
an expensive operation (like a modifer) to run again, even if all the
parameters were identical.
The fix prevents this by treating unchanging values in the field as a
cancel operation.
Reviewed By: Severin
Maniphest Tasks: T87448
Differential Revision: https://developer.blender.org/D10976
This is a first iteration of a switch node. It can only switch between
two inputs values based on a boolean. A more sophisticated switch
node that has an integer selector will probably come later.
Currently, the geometry nodes evaluator does not support lazy evaluation
of individual inputs. Therefore, all inputs will be computed currently.
An improvement to the evaluator will be worked on separately.
Ref: T85374
Differential Revision: https://developer.blender.org/D10460
Prevent drag events from changing the highlighted gizmo
unless the drag event activates the gizmo.
This resolves a glitch where testing a drag event would highlight
at the point the drag was initiated even when the event was not handled.
The previous code had unclear hacks to avoid updating while transforming,
it was also duplicated in two functions causing an inconsistent
initialization of the looptris bvhtree (which could even generate
unpredictable snapping results).
Now, detection update and inicializatiom of common members are contained in
`snap_object_data_mesh_get` and `snap_object_data_editmesh_get`.
Also, the "Hack to avoid updating while transforming" is more evident.
This method is similar to `std::vector::emblace_back` in that it constructs
the new object inplace in the vector, removing the need for a move.
The `_as` suffix is consistent with similar behavior in Map and Set data structures.
It is important to limit the pixels read on `BLI_array_iter_spiral_square`.
Fortunately `ED_view3d_depth_read_cached` was not being called with a
`margin` parameter.
Wrong logic introduced in rB44c76e4ce310.
It is important to limit the pixels read on `BLI_array_iter_spiral_square`.
Fortunately `ED_view3d_depth_read_cached` was not being called with a
`margin` parameter.
Wrong logic introduced in rB44c76e4ce310.
This allows us to build more complex values in-place in the map.
Before those values had to be build separately and then moved into the map.
Existing calls to the Map API remain unchanged.
A virtual array is a data structure that is similar to a normal array
in that its elements can be accessed by an index. However, a virtual
array does not have to be a contiguous array internally. Instead, its
elements can be layed out arbitrarily while element access happens
through a virtual function call. However, the virtual array data
structures are designed so that the virtual function call can be avoided
in cases where it could become a bottleneck.
Most commonly, a virtual array is backed by an actual array/span or
is a single value internally, that is the same for every index.
Besides those, there are many more specialized virtual arrays like the
ones that provides vertex positions based on the `MVert` struct or
vertex group weights.
Not all attributes used by geometry nodes are stored in simple contiguous
arrays. To provide uniform access to all kinds of attributes, the attribute
API has to provide virtual array functionality that hides the implementation
details of attributes.
Before this refactor, the attribute API provided its own virtual array
implementation as part of the `ReadAttribute` and `WriteAttribute` types.
That resulted in unnecessary code duplication with the virtual array system.
Even worse, it bound many algorithms used by geometry nodes to the specifics
of the attribute API, even though they could also use different data sources
(such as data from sockets, default values, later results of expressions, ...).
This refactor removes the `ReadAttribute` and `WriteAttribute` types and
replaces them with `GVArray` and `GVMutableArray` respectively. The `GV`
stands for "generic virtual". The "generic" means that the data type contained
in those virtual arrays is only known at run-time. There are the corresponding
statically typed types `VArray<T>` and `VMutableArray<T>` as well.
No regressions are expected from this refactor. It does come with one
improvement for users. The attribute API can convert the data type
on write now. This is especially useful when writing to builtin attributes
like `material_index` with e.g. the Attribute Math node (which usually
just writes to float attributes, while `material_index` is an integer attribute).
Differential Revision: https://developer.blender.org/D10994
Now if one stroke in the extremes of the stack is selected, other strokes are moved.
Reviewed By: pepeland, Dantti
Maniphest Tasks: T87321
Differential Revision: https://developer.blender.org/D10997
This adds support for mutable virtual arrays and provides many utilities
for creating virtual arrays for various kinds of data. This commit is
preparation for D10994.
Caused by {rB571362642201} where versioning code for new sequencer tool
settings was only done for scenes already having sequencer scene->ed.
If scene->ed was not present, sequencer tool settings were never
initalized for this scene [if the VSE was then used later], leading to
crashes in some places.
Now just use the versioning code to initalize sequencer tool settings
for all scenes not having them yet.
Maniphest Tasks: T87010
Differential Revision: https://developer.blender.org/D10996
Click-drag events that weren't handled would continually be tested
for each mouse-motion event.
As well as being redundant, this added the overhead of querying
gizmos twice per motion event.
Now click-drag is only tested once when the drag threshold is reached.
This mitigates T87511, although the single drag test still causes
the snap gizmo to flicker.
The intention with this API function was to temporarily load
ID's tagged LIB_TAG_TEMP_MAIN,
however the way the `real_main` was used,
these ID's were loaded into the G.main.
`ob->runtime.geometry_set_eval` can contain instances as well.
This only affected instances generated by geometry nodes.
We should probably have a separate function that tells us if an object
has instances or not..
Compilation fails when our OCIO wrapper creates a shader that
transfer first to scene ref and directly after that to display.
This cause is that the GPU resources of both transfers had the same
name. This is fixed by prefixing the resources.
This can be reproduced by loading a movie file (mkv) in the VSE editor.
Reported by Sergey Sharybin.
In the past, custom attributes were rarely used in practice, because the
only way to use them was from Python. Since geometry nodes, more
users started to add their own attributes. Those attributes should not
be removed automatically. It is still possible to remove them in
geometry nodes explictly to improve performance.
This has technically been fixed by rB3e87d8a4315d794efff659e40f0bb9e34e2aec8a,
but the fix there is questionable, because it disables an optimization for vertex groups
entirely. This fix is a little bit more precise in that it only disables the optimization when
the object is used by some geometry nodes modifier.
This flag is needed so PointerRNA structs that aren't
part of the current context can access enum values
without inspecting the context.
This is needed for keymap access, so the keymap UI and keymap
export doesn't depend on the current context.
This changes the following items:
- package name is now `blender-3.0.0-git.09eb04c0a865-windows64`
rather than `blender-3.00.0-git.09eb04c0a865-windows64`
- Fix version resource for blender.exe not building
- Data directories are now `3.0\...` rather than `3.00\....`
- User prefs are now in:
`c:\Users\users\AppData\Roaming\Blender Foundation\Blender\3.0\`
rather than:
`c:\Users\users\AppData\Roaming\Blender Foundation\Blender\3.00\`
- Updating startup & preferences from previous release
has a special exception for 3.0 to check for 3.93 and older.
See T87532
Ref D10986
`make lite` does not use audaspace, so some files will pollute the console with
tons of warnings about audio values not defined.
Reviewed By: nexyon, campbellbarton
Differential Revision: https://developer.blender.org/D10981
The exporting was creating a pdf state for each stroke, but this was necessary only for strokes with opacity.
Now, the state is only created when needed and remove the state variable from class.
Also, avoid exporting invisible strokes.
Blender 3.0 is now in bcon1 (alpha).
There are likely a few places in Blender and the automated building pipeline
that may fail since we are switching our versioning number system.
For example, at the moment the splash and the status bar are showing
3.00.0, and it should show 3.1.0.
I suspect the Python API, version used to report a bug, buildname, are
all wrong too. These will be handled later.
Since these were added, we decided that builtin and reserved name
attributes start with a lowercase letter. We also use "id" already in
a few nodes, so this change will be consistent with that.
When inserting a node on top of a link, the multi input socket
indices weren't updated. This fixes that and keeps the relative
order of the links the same.
Author: Wannes Malfait
Reviewed By: Fabian Schempp
Differential Revision: https://developer.blender.org/D10969
T87356 occured because last_node_hovered_while_dragging_a_link was not
set on node_link_init.
The assert in T87358 failed because the sorting operation was called even
if the drag link contained a link to another socket.
A little one frame jump was caused because frame was refreshed after
picking a link and before sorting happened.
Reviewer: Hans Goudey
Differential Revision: https://developer.blender.org/D10940
This introduces a context path to the spreadsheet editor, which contains
information about what data is shown in the spreadsheet. The context
path (breadcrumbs) can reference a specific node in a node group
hierarchy. During object evaluation, the geometry nodes modifier checks
what data is currently requested by visible spreadsheets and stores
the corresponding geometry sets separately for later access.
The context path can be updated by the user explicitely, by clicking
on the new icon in the header of nodes. Under some circumstances,
the context path is updated automatically based on Blender's context.
This patch also consolidates the "Node" and "Final" object evaluation
mode to just "Evaluated". Based on the current context path, either
the final geometry set of an object will be displayed, or the data at
a specific node.
The new preview icon in geometry nodes now behaves more like
a toggle. It can be clicked again to clear the context path in an
open spreadsheet editor.
Previously, only an object could be pinned in the spreadsheet editor.
Now it is possible to pin the entire context path. That allows two
different spreadsheets to display geometry data from two different
nodes.
The breadcrumbs in the spreadsheet header can be collapsed by
clicking on the arrow icons. It's not ideal but works well for now.
This might be changed again, if we get a data set region on the left.
Differential Revision: https://developer.blender.org/D10931
The fact that geometry from instnances isn't realized when applying
a nodes modifier can be very confusing, especially for new users.
Nodes themselves realize geometry instances implicitly whenever they
need to. We also currently make instances real and convert points to
mesh when a modifier is added after the nodes modifier. With this
commit, we simply do the same thing when applying the modifier.
There are a few downsides though:
- This can be an extremely heavy operations in some cases where
geometry nodes is used to instance heavy geometry.
- We will still have the issues with materials, since instances use
materials from their original objects, but real geometry uses
materials from the modifier object.
It was decided to live with the potential performance downsides
for now, the idea is the upsides of the change are more important,
and people making complicated setups will be more likely to know not
to apply the modifier. In the future there could be a warning if it's
necessary though.
Ref T87083
This will hopefully make it faster to start using the node editor.
The workspace also includes the spreadsheet. Note that while
existing startup files won't have this workspace added, it will be
in the list of options when clicking on the "add workspace" button.
Ref T86499
Now, instead to offset the stroke color to make it visible over fill, the stroke keeps the original color and the fill is offset.
Related to the issue in T87406.
The color of the strokes was shifted when using `Single Color` or
`Object Color`in Solid Display Mode. This was originally done so
that it was still possible to differentiate strokes and fills.
The fix allows for a completly flat shading by checking if the
Lighting Mode is set to `Flat`. If it is, then the colors are not
shifted for the strokes and everything will use the same color.
Reviewed By: antoniov, fclem
Maniphest Tasks: T87406
Differential Revision: https://developer.blender.org/D10957
This patch adds domain and data type information to each row of the
attribute search menu. The data type is displayed on the right, just
like how the list is exposed for the existing point cloud and hair
attribute panels. The domain is exposed on the left like the menu
hierarchy from menu search.
For the implementation, the attribute hint information is stored as a
set instead of a multi-value map so that every item (which we need to
point to descretely in the search process) contains the necessary data
type and domain information by itself. We also need to allocate a new
struct for every button, which requires a change to allow passing a
newly allocated argument to search buttons.
Note that the search does't yet handle the case where there are two
attributes with the same name but different domains or data types in
the input geometry set. That will be handled as a separate improvement.
Differential Revision: https://developer.blender.org/D10623
Within the 2D Animation workspace, the 'Cursor' dropdown currently displays the 'Display Cursor' incorrectly aligned.
This change fixes the alignment issue.
Reviewed By: #user_interface, #grease_pencil, antoniov
Differential Revision: https://developer.blender.org/D10614
GOP size and quality are adjusted for h264 codec.
These new values are based on result of benchmark on 9 random files:
https://docs.google.com/spreadsheets/d/1nOyUGjoVWUyhQ2y2lAd8VtFfyaY1wQNGj1krCCNbk7Y/edit?usp=sharing
Reducing quality to 50 reduces proxy filesize by about 2x on average
and has no significant impact on decoding performance.
Increasing GOP size from 2 to 10 also reduces proxy filesize 2x-3x
while scrubbing is only about 8% slower. It is still around 100FPS
with 1920x1080 media.
This is unfortunately about 50% slower than MJPEG, but this can be
improved with `fastdecode` tune applied to libx264 encoder
Quite surprisingly h264 codec presets had little influence on proxy
building performance as well as proxy filesize. So far it looks that
FFmpeg does initialize encoder in different way then Blender.
This applies mot only for presets but for tune and profile libx264
setting.
Once this issue is resolved, performance of proxies may be optimized
further.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10897
When trying to export a GPencil object to SVG from outside the camera
view, the expoted file would contain invalid data. This was because the
calculation of the bounding box did not have any objects to
iterate over.
The fix makes sure we create the object list before trying to calculate
the bounding box.
Reviewed By: antoniov
Maniphest Tasks: T87479
Differential Revision: https://developer.blender.org/D10975
Some operations may use no preferredResolution ({0, 0}) when calling determineResolution on inputs to check if they have resolution on their own. See MixOperation or MathOperation determineResolution implementation. In such cases {0, 0} resolution ends up being set when an input doesn't have own resolution, breaking propagation of the original preferredResolution. They don't mean to set it as resolution, it's just a check.
This patch only allows to set valid resolutions (>0). When it's 0 it may be understood as "No preferred or determined resolution" so it should not be set to give output operations another chance of finding a proper resolution by calling determineResolution again with a different preferredResolution.
Test file:
{F9932526}
Reviewed By: #compositing, jbakker
Differential Revision: https://developer.blender.org/D10972
The SB back-end optimizer for the mesa R600g driver corrupts the vertex
shader for widget drawing. This will not be fixed upstream because SB is
getting replaced as part of the new NIR path. This was thought to be an
issue with instancing and an attempted fix was submitted in D8374, but
it did not fix the issue.
This patch reimplements the array look-up part of the code using switch
case as a workaround and removes the old workaround implemented as part
of D8374.
Reviewed By: Clement Foucault
Differential Revision: https://developer.blender.org/D10967
With this patch, users can define custom tooltips for the exposed
properties of their Geometry Nodes Groups.
Currently this custom tooltips are only used in the modifier panel,
but its a long term goal to use it in the node editor.
Reviewer: Hans Goudey
Differential Revision: https://developer.blender.org/D10884
This implements the changes discussed in T87134 for including switch
object funcionality in 2.93. This includes:
- Remove the switch object operator experimental option
- Remove the option for switching objects in Edit Mode.
- Rename switch_object to transfer_mode.
- Enable the operator only in sculpt mode.
- Expose the operator in the Sculpt menu with an eyedropper modal
option.
On later releases, we could revisit enabling the operator in other mode
and object types as well as its place in the UI.
Reviewed By: JulienKaspar, JacquesLucke
Differential Revision: https://developer.blender.org/D10953
Sculpt menus were using the legacy expand operator. This updates all
entries to use the new one.
It does not make sense to use Expand from the menus as it relies on the
brush cursor position, but now all Expand shortcuts are listed in the
UI.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10952
Previously, the bone position outside of "fit to curve length" mode was
incorrect.
It assumed that the curve was completely straight with no bends or
turns. This would lead to bones being scaled down as their final
position would be servery underestimated in some cases.
The solution is to do a sphere -> curve intersection test to see where
to put the bones while still preserving their length. As we are using
the tessellated curve data this essentially boils down to us doing a
sphere -> line intersection check.
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D10849
Add a `source_archive_complete` target for `make` that creates a source
archive including the source packages of Blender's dependencies.
This expands `make_source_archive.py` to include files from
`${BUILD_DIR}/source_archive/packages/` as well.
Reviewed By: dfelinto
Maniphest Tasks: T86124
Differential Revision: https://developer.blender.org/D10727
This is done to ensure building with newer OptiX SDK releases that add new struct fields gives
deterministic results (no uninitialized fields and therefore random data is passed to OptiX).
Pass `bContext *C` a bit further down the call stack, to prevent
exploding the number of parameters of `ED_preview_icon_render()`. An
upcoming change will require access to yet another context member, and
this can now be done without adding yet another parameter.
No functional changes.
Adds appropriate checks/guards around all the untrusted parameters
which are used for reading from memory.
Validation:
- All the crashing files within the bug have been checked to not causes
crashes any longer>
- A handful of correct .bmp were validated: 3 different files at each
of 1, 4, 8, 24, 32 bpp depth along with a random variety of other 24
bpp files (around 20 in total).
- ~280 million iterations of fuzzing using AFL were completed with 0
crashes. The old code experienced several dozen crashes in first
minutes of running {F8584509}.
Ref D7945
Entering the numbers in the keyframe field was not triggering a viewport
update, so the little green lines down in the cache area were only
change when the user e.g. changed the frame.
Now send appropriate notifiers.
Issue spotted in T86456 by sebastian_k.
Maniphest Tasks: T86456
Differential Revision: https://developer.blender.org/D10963
- Optionally get the error as a single line.
- Support access the error as an allocated string.
- PyC_ExceptionBuffer_Simple was always printing to the `stdout` while
PyC_ExceptionBuffer didn't, now either print to the output.
Without this, callers are unable to do anything with the error string.
This commit cleans up the RNA names of select mirror operators so that
they are all "Select mirror".
This makes the select menu in edit/pose mode consistent regardless of
object type.
Differential Revision: https://developer.blender.org/D7356
This is especially useful when trying to add a node group instance, e.g. via
drag & drop from the Outliner or Asset Browser.
Previously this would just silently fail, with no information why. This is a
source of confusion, e.g. earlier, it took me a moment to realize I was
dragging a node group into itself, which failed of course.
Blender should always try to help the user with useful error messages.
Adds error messages like: "Nesting a node group inside of itself is not
allowed", "Not a compositor node tree", etc.
Adds a disabled hint return argument to node and node tree polling functions.
On error the hint is reported, or could even be shown in advance (e.g. if
checked via an operator poll option).
Differential Revision: https://developer.blender.org/D10422
Reviewed by: Jacques Lucke
Allow users to undo the effect of the "Generate Preview" operator in the
asset browser (`ED_OT_lib_id_generate_preview`). Without this, the
button is too dangerous.
A few strings describing RNA objects were wrong, including copy/paste errors, spelling and case.
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D10899
Changing window state using taskbar system menu could result in a titleless window.
Differential Revision: https://developer.blender.org/D10812
Reviewed by Ray Molenkamp
Before rBf674976edd88, the flag indicating whether a curve was 2D or 3D was
ignored by Surfaces objects.
So it can be said that Surfaces objects were always 3D.
We could remove updates to 2D on Surface objects, so the behavior is
identical to what it was before.
But this would also cause the return of `data.dimensions` to be misleading,
complicate the code a bit and add a micro overhead.
So the solution here is just to init all Surface objects as 3D.
Surface objects can now be constrained to 2D with the command:
```
data.dimensions = '2D'
```
The mixing function was designed to give correct results for Mix values of
-1, 0, and +1, but the behavior between these points was not linear. This is
unavoidable, because the function depends on both Mix and Mix^2 (by
multiplying value and mf) so they could not cancel out completely.
The new formula simply calculates the weighted sum without trying to invent
a smooth function.
Value for MixGlareOperation is now passed directly without scaling because
it is then easier to use.
Note that the previous formula performed max() twice for both input image
and the result, now there is just one max() per channel because the glare
input can't be negative.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7138
Related to {T77023}. When using many Denoise nodes the memory in OIDN
are allocated up front. A mutex could stall the process until. This
change will allocate the memory after it received the lock.
File output node always received the resolution from the first socket.
When that socket didn't had a link it would use a resolution of 0,0.
What lead to not saving the file at all.
This only effected Multi layer OpenEXR files.
This change would go over all the links to find the first valid
resolution.
In recent refactor the operator sockets were migrated from a std::list to a blender::Vector.
The way how the file output node created the sockets along mapping the sockets could
lead to storing incorrect pointers.
This patch fixes this by defining and mapping the sockets in separate loops.
This also fixes the issue that the width of the "Name" column
when viewing instances does not resize correctly.
Differential Revision: https://developer.blender.org/D10926
- Remove `make_quicky` as on modern systems linking is the main
bottleneck, and there isn't such a gain from partial builds.
- Remove enum generator as `PyC_StringEnumItems` & `EnumPropertyItem`
are used in most places to access enums from Python, otherwise macros
are added via macros.
Previously it was not possible to subdivide the last segment of a cyclic
stroke.
The fix makes sure that the correct number of new points is calculated
correctly and adds the new points to the last segment.
Reviewed By: antoniov
Maniphest Tasks: T87157
Differential Revision: https://developer.blender.org/D10902
Linked override were not properly ignored in some part of the code,
leading to invalid resync results in some cases with recursive overrides
(i.e. overrides of overrides).
Reported by Andy @eyecandy from the studio.
We do not want to copy exiting overrides data from linked ID when
creating its local override (be it either a template, or because linked
ID is itself an override of another lib data).
Note that this was not a very serious issue, would just cause some memory
leak since override data is re-created on newly copied local data
anyway.
These use cases have been very little tested so far, but both complex
production pipeline and future restrictive workflow will make them fairly
common...
Relying on only no-main for that was weak, and inn the end it turns out
we sometimes also need to ifnore override data during copy of Main
data-blocks.
NOTE: The new `LIB_ID_COPY_NO_LIB_OVERRIDE` is also added to the
`LIB_ID_COPY_LOCALIZE` set of flags.
NOTE: The fact that we may now copy liboverrides in some non-main cases
may cause issues in some cases, pretty impossible to track all possible
ones from reading the code... Would not expect too many problem though,
usages of `LIB_ID_CREATE_NO_MAIN` by itself are not so common.
The "orient_matrix" parameter was only used when contraint was defined.
This change will hardly be noticed by the user, but it can be useful for
addon developers.
Possibly resolves T85734.
Tell `FindOSL.cmake` where to find the shader header files. These have
moved from `${LIBDIR}/osl/shaders` to `${LIBDIR}/osl/share/OSL/shaders`
when OSL was upgraded (T85365).
Compostior relies heavilly on overridden methods. The override keyword has been added
in this module and is desired. The benefit of the override keyword is
that it reports an error when not applied to a (base) virtual method and report
what will not match when refactoring the code to be closer to blender style guide.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D10846
A `DataSource` provides columns for the spreadsheet to display.
Every column has a SpreadsheetColumnID as identifier. Columns
are not generated eagerly anymore, instead the main spreadsheet
code can request a column from a data source with an column
identifier. The column identifiers can be stored in DNA and allow us
to store persistent data per column.
On the user level the only thing that changes is that columns are
not shown in alphabetical order anymore. Instead, new columns
are always added on the left. The behavior can be changed,
however I'd prefer not to automate this too much currently. I think
we should just add operators to hide/reorder/resize columns soonish.
Differential Revision: https://developer.blender.org/D10901
Some object types don't have a geometry component in the depsgraph.
Before, there always was a warning printed when such an object was
used in the object info node (e.g. to get its location).
Points are drawn as half octahedron (aligned to the camera).
Getting the appropriate matrix for facing the camera would fail in in
orthographic view, points were not facing the camera (revealing their
missing other half octahedron)
Maniphest Tasks: T87150
Differential Revision: https://developer.blender.org/D10923
This is a minor change to add some plumbing code
to support custom geo nodes. This is working the
same way as the custom cycles and compositor nodes.
An example add-in is attached to D10784
Reviewed By: JacquesLucke
Differential Revision: http://developer.blender.org/D10784
Where possible, nodes in the "Geometry" category should support all
geometry component types. This adds support for volumes in the
recently added bounding box node, based on functions added in the
previous two commits.
Differential Revision: https://developer.blender.org/D10906
This commit splits of the function that generates a bounding box for a
volume into a new function, so that the min and max coordinate can
be retrieved from volume data without an object. Also some cleanup:
using the float3 type.
Often you need to apply a transformation to a grid without changing the
original, and it's necessary to avoid a deep copy of the actual data.
OpenVDB has a function to do this, this commit simply adds a wrapper
to transform and use that function with blender's `float4x4` data type.
Split from D10906
Previously only attributes of "real" geometry were displayed in
attribute search. This commit adds code to look through attributes
on instances and add those to the search drop-down too.
This required implementing the same sort of recursive traversal as
the realize instances code. The situation is a bit different though,
this can return early and doesn't need to keep track of transforms.
I added a limit so that it doesn't look through the attributes of
too many instanced geometry sets. I think this is important, since
this isn't a trivial operation and it could potentially happen for
every node in a large node tree. Currently the limit is set at 8
geometry sets, which I expect will be enough, since the set of
attributes is mostly not very unique anyway.
Fixes T86282
Diffrential Revision: https://developer.blender.org/D10919
The problem was that you could getting write access to a grid from a
`const Volume *` without breaking const correctness. I encountered this
when working on support for volumes in the bounding box node. For
geometry nodes there is an important distinction between getting data
"for read" and "for write", with the former returning a `const` version
of the data.
Also, for volumes it was necessary to cast away const, since all of
the relevant functions in `volume.cc` didn't have const versions. This
patch adds `const` in these places, distinguising between "for read"
and "for write" versions of functions where necessary.
The downside is that loading and unloading in the global volume cache
needs const write-access to some member variables. I see that as an
inherent problem that comes up with caching that never has a beautiful
solution anyway.
Some of the const-ness could probably be propogated futher in EEVEE
code, but I'll leave that out, since there is another level of caching.
Differential Revision: https://developer.blender.org/D10916
Fix `nullptr` redeference when setting 'orig_data' pointers on CoW copies,
by stopping the loop also when `element_cow == nullptr`. This avoids a
crash of Blender when the original list of pointers is longer than the
CoW list of pointers.
I've also added a `BLI_assert()` that checks for equal lengths of the
two `ListBase`s, so that problems like these aren't hidden away completely.
The root cause of the crash was actually a modifier that was assigned to
an object of the wrong type (an Armature object doesn't support modifiers).
This caused the list of modifiers on the CoW copy to be shorter than the
list of modifiers on the original Object. It's still a mystery how that
object got that modifier in the first place.
Broken by 04e1feb830
Caused by accidentaly moving `SEQ_proxy_rebuild_finish` outside of
`if (nseq->type == SEQ_TYPE_MOVIE)` condition in function
`SEQ_proxy_rebuild_context()`.
To check if an "is_mesh_verts_only" mesh, the overlay engine checks if the
mesh has no "totedge" and has "totvert".
However, sometimes this engine can check the wrong mesh since editmesh
works on `embm->mesh_eval_final`.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D10917
Previously, the spreadsheet editor could only show data of the original
and of the final evaluated object. Now it is possible to show the data
at some intermediate stages too.
For that the mode has to be set to "Node" in the spreadsheet editor.
Furthermore, the preview of a specific node has to be activated by
clicking the new icon in the header of geometry nodes.
The exact ui of this feature might be refined in upcoming commits.
It is already very useful for debugging node groups in it's current
state though.
Differential Revision: https://developer.blender.org/D10875
This adds the ability to get a selection list for both edit mode bones
and pose mode bones.
To do this the selection menu list logic had to be reworked a bit.
Before it only stored the names of objects. This might work will of
objects, however as stated in the code, it might fail for linked objects
(so multiple object can have the same name in some corner cases).
For bones it is a very common occurance where you can have multiple
armature that has the same bone names. So now it also stores the object
and bone pointers for this case.
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D10570
Fix T85796
The issue was that where_on_path uses a resampled curve to get the data
from the curve. This leads to disconnects between the curve the user
sees and the evaluated location data.
To fix this we simply use the actual curve data the user can see.
The older code needed a cleanup either way as there were hacks in other
parts of the code trying to work around some brokenness. This is now
fixed and we no longer need to clamp the evaluation range to 0-1 or make
helper functions to make it do what we actually want.
Reviewed By: Campbell, Sybren
Differential Revision: http://developer.blender.org/D10898
While the existing behavior worked as intended,
it wasn't possible to have two views on the same file at different
locations.
Since there isn't much use in having two views open at the same location
allow one view to be at a different scroll location.
UI edit-source and selecting a text data block now need explicit calls
to scroll to the cursor location.
Resolves T87284
Without legacy-undo, loading memfile undo only cleared edit-mode data
for mesh and armature object types.
This causes an assertion when loading edit-mode undo steps afterwards
for other object types as the existence of this data made entering
object mode fail.
Resolve this by freeing all objects types undo data from ED_editors_exit
Before this change, object-data could only have
one of the objects referencing it in edit-mode.
Reverting since multiple meshes in edit-mode (for the same object data)
isn't thread-safe as the evaluated edit-meshes are created in the
original edit-mesh, causing a crash updating the depsgraph
for linked duplicates, see: T86767.
While we could support this case, it's a bigger project without
significant benefits, so reinstate the limitation of only
allowing a single object to be in edit-mode for each object data.
This adds back the error from T85974 which caused an assertion
but didn't crash in release builds.
This reverts commit 2b60d7d09c.
This commit essentially touches to post-processing of collections and
objects after resync itself has been done, to ensure their proper
instantiation in the scene:
- Remove a lot of the process in resync case (resynced data are assumed
to be already instantiated in the scene, unlike override creation
case).
- For auto-resync, only do post-processing once after all overrides
have been resynced (doing it after each individual resynced was
causing a lot of instantiation glitches, with a lot of unwanted
extra objects and collections being added to the master collection).
It also deals in a much more reliable way with detection of objects
missing from the scene, by using the new `BKE_scene_objects_as_gset`
utils.
As a bonus this makes auto-resync process slightly faster (only by a few
percents, but that's always good to get).
This is internaly using the code of `BKE_scene_objects_iterator` and
steals its gset. More efficient than using that iterator directly to
rebuild another GSet...
In folded view, some type of data are listed as one icon per item,
others are 'compacted' as a single icon with a counter.
This commit adds bones (edit, normal and pose ones), pose groups and
vertex groups as 'compacted' ones in folded view.
Part of D10855.
This is a minimal, information-only view currently, listing by default
all the override data-blocks, with their user-edited override
properties.
System-generated overrides (like the overrides of pointers to other
override data-blocks) can be shown through a filter option.
Finally, potential info or warning messages from (auto-)resync propcess
are also shown, as an icon + tooltip next to the affected items.
Part of D10855.
This flag is set for liboverride IDs that are detected as no longer
needed by resync process, while having been user-edited, so
auto-handling code cannot silently delete them.
Exposing those to users will be part of the new incoming Override
Outliner view.
Part of D10855.
This removes a lot of unnecessary code that is generated by
the compiler automatically.
In very few cases, a defaulted destructor in a .cc file is
still necessary, because of forward declarations in the header.
I removed some defaulted virtual destructors, because they are not
necessary, when the parent class has a virtual destructor already.
Defaulted constructors are only necessary when there is another
constructor, but the class should still be default constructible.
Differential Revision: https://developer.blender.org/D10911
This code is incompatible with .blend files from subversion 16 and 17.
The ideal would be to create a new subversion when landed rBf674976edd88.
But for now, due to the delay, moving the code to the previous subversion
can solve it.
The function name was not very specific, this makes it clearer that it
works on instances rather than only real geometry. Also use `r_`
prefix for the return argument.
During review of D10730 it was discovered that the "uv" name causes
issues for cycles, which uses it as a default internal data name. While
that could be fixed in the future, there was no particular reason to use
"uv" instead of "uv_map", so we use the latter instead here, which
is consistent with the lowercase naming scheme chosen for attributes.
Some of the BMesh primitive operators have a lot of overhead due to the
fact that they use other operators like extrusion, removing doubles,
and rotation, to build each shape rather than filling arrays directly.
Implementing the primitives directly with the Mesh data structure is
much more efficient, since it's simple to fill the result data based
on the known inputs. It also allows also skip the conversion from BMesh
to Mesh after the calculations.
Speed matters more for procedural operations than for the existing
operators accessible from the add menu, since they will be executed
every evaluation rather than once before a destructive workflow.
| Shape | Before (ms) | After (ms) | Speedup (x times faster) |
| -------- | -------------| ------------| -------------------------|
| Cylinder | 1.1676 | 0.31327 | 3.72 |
| Cone | 4.5890 | 0.17762 | 25.8 |
| Sphere | 64213.3 | 13.595 | 4720 |
The downside of this change is that there will be two implementations
for these three primitives, in these nodes and in `bmo_primitive.c`.
One option would be re-implementing the BMesh primitives in terms of
this code, but that would require `BMesh` to depend on `Mesh`, which
is currently avoided. On the other hand, it will be easier to add new
features to these nodes like different fill types for the top and the
bottom of a cylinder, rings for a cylinder, and tagging the output with
boolean attributes. Another factor to consider is that the add mesh
object operator could be implemented with these nodes, just providing
more benefit for a faster implementation.
As a future cleanup, there is room to share code that generates the
"rings" topology between different nodes that generate meshes.
Differential Revision: https://developer.blender.org/D10730
When having a checkbox and a value both in one row together with an
animation decorator it is questionable whether the decorator should act
on animating the checkbox or the corresponding value. At the moment,
usage in modifiers does not seem to be very consistent:
Here the animation decorator works for animating the checkbox:
- `Build` (greasepencil) > `Factor` (this was reported and is changed in
this patch to act on the value instead of the checkbox)
- `DataTransfer` > `Topology Mapping` > `Max Distance` (this I guess
should also act on the value instead of the checkbox)
- `Edge Split` > `Edge Angle` (questionable)
- `Mirror` > `Merge` (questionable)
- `Screw` > `Merge` (questionable)
- `Wireframe` > `Crease Edges` (questionable)
Here the animation decorator works for animating the value:
- `VertexWeightEdit` > `Group Add/Remove Threshold`
- `Decimate` > `Symmetry`
So in this patch only the behavior in the greasepencil Build modifier UI
is changed, since I think it is quite obvious that one would more often
use the decorator for animating the factor value than for animating the
checkbox.
Maniphest Tasks: T87263
Differential Revision: https://developer.blender.org/D10910
This was added in 37b82a2d26, doesn't have much purpose and doesn't even do
anything in the vast majority of cases. It only affects custom properties. So
at the very least it shouldn't be shown for regular RNA property buttons. But
even for cases where it may do something, we couldn't find a good use-case. If
this operator has use-cases with some add-ons, the add-ons can expose it
differently, e.g. with a little 'x' icon next to the button, like it's done in
the keymap editor.
So removing the context menu entry now. Should this turn out to be a problem,
it can be brought back but much more selectively (only where it actually does
something). Or we could combine it with "Reset to Default".
Differential Revision: https://developer.blender.org/D8727
Reviewed by: Brecht Van Lommel, Hans Goudey
This patch fixes the issue in T86463 that colored collection icons in
the collection search box don't scale according to the zoom level.
The issue was caused by the drawing function for the colored
collection icons not allowing to change the size of the icons.
This patch addresses that by scaling the icon based on the drawing
width.
Reviewed By: #user_interface, natecraddock, Severin
Differential Revision: https://developer.blender.org/D10708
This is caused by rB9f323e9bf79f. When hover shortcuts are used,
we cannot use the modifier from the context (which will be the
active modifier), or they won't be hover shortcuts anymore!
There didn't use to be an editor-level "modifier" context variable,
which is why this worked before.
The fix is simple, just specify the modifier name for this particular
remove button.
Differential Revision: https://developer.blender.org/D10870
The default insert link callback for nodes was trying to move the
existing link away, since it didn't properly handle multi-input sockets
(though the problem wasn't exposed for the join node). We can basically
skip all of this "moving existing links" for multi-input sockets, unless
we are at the link limit.
This commit adds a simple node to output the min and max of an
axis-aligned bounding box for the input geometry, as well a rectangular
prism mesh created from these values for convenience.
The initial use case for this node is a "bounding box boolean", where
doing the boolean with just a bounding box could be signigicantly
faster, for cases like cutting a hole in a wall for a window. But it's
easy to imagine other cases where it could be useful.
This node supports mesh and point cloud data right now, volume support
will come as a separate patch. Also note that there is plenty of room
to improve the performance of this node through parallelization.
Differential Revision: https://developer.blender.org/D10420
Caused by typo in {rB76689e851700}.
Since Palettes and bGPDpalette are not the same size, this would not
only cause a crash in versioning code, but could only go downhill from
here on.
Maniphest Tasks: T87236
Differential Revision: https://developer.blender.org/D10903
The `InputAngle` function uses a flawed algorithm to fix precision issues.
This commit refactor the logic of that function by using BLI utilities.
Differential Revision: https://developer.blender.org/D10880
For debugging purposes to convert the internal state of the
NodeOperationBuilder to a graphviz.
Usage:
std::cout << *this << "\n";
Inside any method of the NodeOperationBuilder.
For curves, we need to tag the curve ID_RECALC_COPY_ON_WRITE for batch
cache update (same as in {rB24b2fe50f3ec}).
Maniphest Tasks: T86932
Differential Revision: https://developer.blender.org/D10826
Tweaking e.g. a field strength would then not use the curve/surface
normal anymore [but the object center instead].
If a curve has a forcefield with effector shape Curve (in code its shape
is PFIELD_SHAPE_SURFACE then), it wil get a SurfaceModifier.
Changing properties will free the SurfaceModifierData's bvhtree and mesh
And these dont get copied along when doing the CoW copy, these are
explicitly set to NULL. So this was also failing for meshes, not just
curves.
Without the mesh & bvhtree though, get_effector_data() will not set the
EffectorData's normal correctly (it is closest_point_on_surface() which
does this). And without the right EffectorData's normal, the effector
will of course work unexpected.
Going in and out of editmode made this work because that goes down this
route:
- BKE_object_handle_data_update
- BKE_displist_make_curveTypes
- do_makeDispListCurveTypes
- curve_calc_modifiers_post
-- BKE_mesh_new_nomain_from_curve_displist
-- we then have our desired updated mesh from the curve
-- this will also call the SurfaceModifiers deformVerts [which - given we
have a valid mesh - will update the bvhtree properly]
Also note that _animating_ the effector actually works, (have not done
the deep dive why this works, assume the curve geometry is updated in
this case)
So, now just carefully tag the curve ID_RECALC_GEOMETRY in
rna_FieldSettings_update for this specific case.
Maniphest Tasks: T84623
Differential Revision: https://developer.blender.org/D10092
Caused by rB0f95f51361d7.
Similar to T85515, T84717, T85543 and their related fixes.
In this case, add missing shading notifier as in rB9274bd457a25.
Reviewed By: brecht, lichtwerk
Maniphest Tasks: T86175
Differential Revision: https://developer.blender.org/D10604
Selecting random percentage would not reliably guarantee the precise
percentage of selected elements now randomize an index array instead
and use the precise number of elements from this array.
Note that this change has only been made to edit-mesh
and should be applied to all random selection operators.
Reading Area.type & ui_type printed an error from `pyrna_enum_to_py`
and returned an empty string.
As empty is a valid value, include it in the property enum list.
For Cycles, when enabling the Persistent Data option, the full render data
will be preserved from frame-to-frame in animation renders and between
re-renders of the scene. This means that any modifier evaluation, BVH
building, OpenGL vertex buffer uploads, etc, can be done only once for
unchanged objects. This comes at an increased memory cost.
Previously there option was named Persistent Images and had a more limited
impact on render time and memory.
When using multiple view layers, only data from a single view layer is
preserved to keep memory usage somewhat under control. However objects
shared between view layers are preserved, and so this can speedup such
renders as well, even single frame renders.
For Eevee and Workbench this option is not available, however these engines
will now always reuse the depsgraph for animation and multiple view layers.
This can significantly speed up rendering.
These engines do not support sharing the depsgraph between re-renders, due
to technical issues regarding OpenGL contexts. Support for this could be added
if those are solved, see the code comments for details.
* Move out of Simplify panel, into Light Paths > Fast Global Illumination
* Add separate boolan setting to enable/disable it separate from Simplify
* Default AO bounces to 1
* Put ambient occlusion distance in this panel as well
Since you can already specify a separate size for X and Y with the
grid node, it makes sense to be able to specify the size separately
for each axis also.
This also avoids some awkward math with a Transform node afterwards
when you want a specific size for each direction.
Versioning (except for animation and drivers) is handled in this commit.
Differential Revision: https://developer.blender.org/D10834
Materials used in grease pencil modifiers have the requirement that they
are already used on the object. In the UI dropdown, this restriction is
ensured by calling uiItemPointerR with appropriate searchptr and
searchpropname, so only giving the user the choice of materials already
used on the object.
From python though, it was still possible to assign materials outside of
this this restriction. This led to reports like T86981 [which have been
partially solved by clamping the material index in the modifier code to
be in the valid range].
Now make sure we dont assign "invalid" materials through RNA by
appropriate RNA pointer functions.
This also adds a proper warning (red, alert) in case of the LineArt
modifier if such a invalid material is still in the file [same as other
modifiers already do].
Differential Revision: https://developer.blender.org/D10873
This resulted in bad motion blur from alembic animation when imported
after rB83980506957c (because it was now OFF by default).
When imported in a version prior to rB83980506957c and saved, this was
still working fine.
Vertex interpolation option introduced in rBbab2260b59c7 was defaulting
to ON (correct) in that commit, but was lost in rB83980506957c.
Now switch this to ON by default again.
Note: if you have a file that was (incorrectly) imported with a version
after rB83980506957c you'll have to enable Vertex Interpolation option
on every MeshSequenceCache modifier by hand.
Maniphest Tasks: T86654
Differential Revision: https://developer.blender.org/D10876
Since these nodes are usually used for more basic operations and the
attribute nodes are used when more complexity is necessary, it makes
sense to give these nodes more accessible defaults-- hopefully this can
make learning about the core concepts of geometry nodes a bit easier.
Before this change, you could have the new sculpt symmetry code and the
older weight paint symmetry code active at the same time. This would
lead to users easily trashing their weigh paint data if they were not
careful when switching between modes.
Now the specific weight paint symmetry code is an exclusive toggle so
the user can't accidentally mirror strokes and vertex groups at the same
time. This also paves the way of supporting Y and Z symmetry in the
future for weight groups mirroring if we decide to add it in the future.
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D10426
The following primitives needed ME_EDGEDRAW, ME_EDGERENDER edge flags:
* Grid
* Circle
Set flags on the inside edges for grid and circle triangle fan (mesh primitive nodes)
so they are visible and selectable.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D10878
The main goal here is to remove the need for a C API to the code in
`mesh_boolean_convert.cc`. This is achieved by moving `MOD_boolean.c`
to C++ and making the necessary changes for it to compile. On top of
that there are some other slight simplifications possible to the
direct mesh boolean code: it doesn't need to copy the material
remaps, and the modifier code can use some other C++ types directly.
The old path that didn't skip the conversion to and from BMesh for
the exact solver was not yet removed from this file. At this point no
problems have came up in the new implementation, so it's safe
to remove it.
This commit improves the performance of the node by up to 40% in some
cases when there are only two input meshes, mainly by skipping the
conversion to and from BMesh.
When there are more than two input meshes (note the distinction from
"Geometries", a geometry set can have many mesh instances), the
performance is actually worse, since boolean currently always does
self intersection in that case. Theoretically this could be improved
in the boolean code, or another option is automatically realizing
instances for each input geometry set.
Another improvement is using multi-input sockets for the inputs, which
removes the need to have a separate boolean node for every operation,
which can hopefully simplify some node trees.
The changes necessary for transforms in `mesh_boolean_convert.cc` are
somewhat subtle; they come from the fact that the collecting the
geometry set instances already gives transforms in the local space
of the modifier object. There is also a very small amount of cleanup
to those lines, using `float4x4::identity()`.
This commit also fixes T87078, where overlapping difference meshes
makes the operation not work, though I haven't investigated why.
Differential Revision: https://developer.blender.org/D10599
Handle Lattice object the same way as Mesh objects. This is mostly to
execute the `object->data = data_eval;` line, which ensures that the
evaluated mesh is assigned to the evaluated object, and thus prevents
the lattice from un-deforming.
This fixes T86440
As the CU_2D flag is set for nurbs, a Curve can have 2D nurbs mixed with 3D.
But the UI does not allow this mixing. It updates all nurbs to 2D or 3D when set.
So remove this specific flag for nurbs.
This may break old files, since 2D curves with mixed 3D are now set as 3D.
Differential Revision: https://developer.blender.org/D10738
Previously, `node_name` was rarely actually a name of a node. It is set
correctly as node name in `ED_node_tree_push`. However, later on it
was overwritten by the name of an id data block in `node_draw_space`.
Now, the node_name stays the name of the "parent" node. Whereas
display_name is the name that will be displayed in the breadcrumbs.
With this change, the `node_name` can be used to reconstruct the
actual path from the root node tree to the currently visible tree.
Differential Revision: https://developer.blender.org/D10874
The node tree evaluator now calls a callback for every used socket with
its corresponding value(s). Right now the callback does nothing.
However, we can use it to collect attribute name hints, socket values
for debugging or data that will be displayed in the spreadsheet.
The main difficulty here was to also call the callback for sockets in
nodes that are not directly executed (such as group nodes, muted
nodes and reroutes).
No functional changes are expected.
After some back and forth with the GP module and some artists, this
option was deemed not that useful. The use case was considered too
obscure so we'll remove it.
It is still posible to have this functionality by using the vertex
weight modiifers or manually clamping the weights.
If any axis of the scale of an object was zero, transforming failed.
This was because `td->smtx` was set to a zero matrix.
orthogonalize_m3_zero_axes is used to fill in the zeroed axes.
Thanks to @filedescriptor for the initial fix: D10869.
Expose a this function to initialize any zeroed axes
to an orthogonal vector based on other non-zeroed axes.
This functionality already existed for `invert_m#_m#_safe_ortho`,
expose as a public function as it's useful to be able to fill in zeroed
axes of transformation matrices since they may be used in matrix
multiplication which would create degenerate matrices.
Compute a subset of the area light that actually affects the shading point
and only samples points within that.
It's not perfect as the real subset is a circle instead of a rectangle, and
the attenuation is not accounted for. However it massively reduces noise for
shading points near the area light anyway.
Ellipse shaped area lights do not have this importance sampling, but do not
have solid angle importance sampling either.
Ref D10594
This simulates the effect of a honeycomb or grid placed in front of a softbox.
In practice, it works by attenuating rays coming off-angle as a function of the
provided spread angle parameter.
Setting the parameter to 180 degrees poses no restrictions to the rays, making
the light behave the same way as before this patch.
The total light power is normalized based on the spread angle, so that the
light strength remains the same.
Differential Revision: https://developer.blender.org/D10594
The combination of building unit tests and WITH_CYCLES_NATIVE_ONLY did not
correctly detect when AVX/AVX2 support is available.
Differential Revision: https://developer.blender.org/D8201
Fix a segfault by setting the `batch_cache` pointer to `NULL` when copying
a Lattice. That way the copy can get its own batch cache when needed,
preventing a use-after-free.
This condition was in contradiction with comment for function
`ffmpeg_generic_seek_workaround()`.
I have noticed, that formats that seeked well used this workaround.
Problem was that I misunderstood code from `av_seek_frame()` - formats
with `read_seek()` function stil don't use generic seeking method.
This is defined in `seek_frame_internal()`
The "Paste Flipped" operator was missing its own tooltip.
This patch adds the tooltip by implementing the `get_description` callback for
`GRAPH_OT_paste` and `ACTION_OT_paste`.
Reviewed By: sybren
Maniphest Tasks: T87037
Differential Revision: https://developer.blender.org/D10859
`ffmpeg_generic_seek_workaround()` applied negative offset for seqrched
packet timestamp, but proxies always start from 0 and timestamp can be
negative.
Limit timestamp value to 0, because `av_seek_frame()` doesn't accept
negative timestamps and returns with error. This prevents seeking from
working correctly.
The RGN_TYPE_EXECUTE region was zero height - with the "Load & Save"
button drawing outside of those bounds - so it didn't respond to events.
This is because the region started off this size and does not change
with simply adding the buttons. Although it has RGN_FLAG_DYNAMIC_SIZE,
delayed reinit of regions is only currently supported on headers.
This gives the execute region an initial (minimum) vertical size but
also makes the region **hidden** by default.
- Showing Prefs as an editor among others it will show the header
but not the execute region.
- Showing the Prefs in a popup window, hides the header region
and shows the execute region.
Ref D10636
Make use of `StatementMacros` so Python structs are formatted correctly.
The comment about STRINGIFY doesn't seem to be valid anymore,
so this has been left out.
This was added in rB93aeb6b318a7, last changed in rB8f0a44a5d55d,
and removed in rB51b796ff1528. I assume it was a way for curves to
have split edges at corners. As far as I can tell it only ever worked
in Blender Internal, and that has been gone for years.
Another possible route here would be restoring this functionality,
but it's generally preferrable to reduce complexity in this
area of curve code than adding it back, especially in the context
of other improvements planned related to curves in geometry nodes.
Differential Revision: https://developer.blender.org/D9966
The index_data_map was not cleared when clearing a cache, so this would just append
the new correct data to the end of the array instead of overwriting it, which would
cause us to then use outdated indices.
For other "Attribute Name" fields we usually give a more specific name
that relates to what the attribute is actually used for, like "Mask" in
the point separate node. This is a similar situation, and would also
be consistent with the naming planned in D10506.
The geometry nodes modifier did not specify that it needs all custom data layers.
Therefore the modifier evaluation code tagged some layers so that they will not be
copied later on by calling `mesh_set_only_copy` in `mesh_calc_modifiers`.
When boolean's Object also has a modifier that depends back on
the target Object, a crash occurred.
In a case like this, BKE_modifier_get_evaluated_mesh_from_evaluated_object
returns NULL, so just have to protect against that case.
- Don't use `r_` prefix for an argument that's also read from
(this is meant for return only arguments).
- Rename variables to make it clear the distance is pixels,
using manhattan length measurement.
The new Cryptomatte workflow assumes that the picker is used in the new
workflow. The legacy node wasn't working as it would never find a
correct cryptomatte layer. This fix will use the color sampling like we
used to do.
WorkPackages struct was created when scheduled. This patch keeps the
WorkPackages around and stores additional data with the workpackages.
The speedup is to small to notice, but it is needed as preparation
to introduce a faster scheduling method.
Regression in 80cbbd2843.
Unfortunately keeping selection picking behavior as well as
supporting finding the nearest face within a radius requires an
inconsistency between x-ray and back-buffer selection that
doesn't work well using the current arguments.
Resolve by adding an argument that causes the input distance
to be ignored for back-buffer selection.
This is used by selection picking but not the knife tool.
This changes behavior for path-selection in face mode,
which now uses a margin for back-buffer selection.
From my own testing this doesn't seem to be a problem like it could be
for regular selection picking.
The tooltip while dragging a collection in Scene mode in the Outliner
was always "Link inside Collection" even if the action performed was
different. This was because the `collection_drop_init` set the
`from_collection` always to `NULL` if the Outliner display mode was
currently set to Scene.
Commit that introduced this issue:
rB0f54c3a9b75be8f8db9022fb0aeb0f8d0d4f0299
The fix removes the check of the display mode and only sets the
`from_collection` to `NULL` if the ctrl (linking) key is held.
Reviewed By: JacquesLucke
Maniphest Tasks: T86947
Differential Revision: https://developer.blender.org/D10864
When using the smooth operator, the thickness would not be
smoothed on the first iteration. This was becasue the inner loop
was set to run `r * 20` times but `r` starts at 0.
The fix makes sure that "Smooth Thickness" works on the first
iteration by using a fixed value of `20` as the loop limit. This
makes sure that for every iteration, we run the smoothing of the
thickness 20 more times.
Reviewed By: antoniov
Maniphest Tasks: T87082
Differential Revision: https://developer.blender.org/D10867
Use LISTBASE_FOREACH instead.
SEQ_CURRENT_BEGIN did null checks, so now these must be explicit.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D10823
Files that only contain a doc-string still included the last blank line,
since this normally contains code examples.
There are some cases where only a docstring exists
which made sphinx report warnings.
Use utility functions to decompose data paths and resolve the
RNA property from a data-path.
Replaces in-line string manipulation and RNA access.
This allows more complex data paths to be used, where previously string
literals in a data path could break the simple data-path handling logic.
Flag check for V3D_LOCK_CAMERA used boolean style assignment to a char,
which worked with this flag but could fail if other flags are added
that use this convention in the future.
- Add static type checks for values so any change to DNA types
will need to be made in the navigation gizmo too.
- Move camera lock check from `rv3d` to `v3d`,
as this isn't stored in the region data.
2D gizmo navigation button that toggles 'Lock Camera to View' while in Camera View.
Differential Revision: https://developer.blender.org/D10835
Reviewed by Campbell Barton
Now `ED_view3d_backbuf_depth_validate`, `ED_view3d_draw_depth` and
`ED_view3d_draw_depth_gpencil` are unified in `ED_view3d_depth_override`.
This new function replaces `ED_view3d_autodist_init`.
Also, since `ED_view3d_depth_update` depends on the render context, and
changing the context is a slow operation, that function also was removed,
and the depth buffer cached is now updated inside the new unified drawing
function when the "bool update_cache" parameter is true.
Finally `V3D_INVALID_BACKBUF` flag has been renamed and moved to
`runtime.flag`.
Differential revision: https://developer.blender.org/D10678
Introduced in rBce462fa1 but harmless since curretly only `StructRNA`
without `owner_id` have the `STRUCT_UNDO` flag cleared.
So this commit does not bring any functional changes but it will be
useful for {D10695}.
The problem was produced because the strokes were selected, but the loop to clear this flag before applying cutter was using unlocked layers only, and the protected layer flag was not reset.
Now, the flag is reset for all layers, locked and unlocked.
It was not possible to determine if a socket was multi input previously
with BPY. This patch exposes the flag as a read-only property of a node
socket. This is important for addons which automatically add connections
between nodes.
Differential Revision: https://developer.blender.org/D10847
Earlier last year, the shortcuts on hover were built as a way to regain
speed lost by removing the "Apply" and "Copy" buttons from the panel.
For the active modifier concept introduced for geometry nodes, the
shortcuts were changed to only affect the active modifier.
Based on feedback, this change slowed down many people's interaction
with the modifier stack so the UI team decided to return hover shortcuts
for modifier panels.
The downside of this change is that it looks like the active modifier is
"selected" and it could be confusing that the modifier shortcuts don't
apply to it. We can explore different ways to display the active status
to address this.
Ref T87012
Generic context operators now look-up the RNA properties to extract
their description (when it's available).
Add `bl_rna_utils.data_path.property_definition_from_data_path()`
to handle the details of accessing the RNA property definition.
When the strength is initially set to zero, the shader graph is
optimized out to remove any node which will not be executed because of
this, which removes pretty much every single node, except for the
output. As the graph is empty, the world shader is made invisible to
rays so it is not evaluated in the kernel.
However, when the strength is then modified, the Background is not
updated as the modification happens on the Shader Node and not on the
Background Node, so it is never tagged as modified.
To fix this, we need to tag the Background as modified when its shader
is also modified so the Kernel data is properly updated.
Regression caused by rBbbe6d44928235cd4a5cfbeaf1a1de78ed861bb92.
Separate tile buffers on all devices only need to exist when denoising is active (so any overlap
being rendered simultaneously does not write to the same memory region).
When denoising is not active they can be distributed like all other memory when peer
memory support is available.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D10858
Display the bone axes at the head (root) of the bone by default, instead
of the tail (tip), and add a slider so that it's possible to adjust this
position.
Versioning code is in place to ensure existing files behave the same
(axes shown at tail), whereas new Armatures will be using the new
default (axes shown at head).
Reviewed By: #animation_rigging, #user_interface, Severin, Sybren
Differential Revision: https://developer.blender.org/D7685
When using `bpy.data.actions[action_name, "nonexistant-library"]`,
use the term `filepath` instead of `name` in the error message.
Also increase the size to match the file path length.
Ref D10253
Remove the `BONE_UNKEYED` flag. It was only written (set/cleared) but
never actually read.
Also remove `framechange_poses_clear_unkeyed()` as its only function was
to clear the `BONE_UNKEYED` flag. It wasn't used anywhere either.
The only code that used the flag was the `extract_pose_from_action()`,
which was removed in 2869ce6cfa (2009).
No functional changes.
Minor changes preparing for snap gizmo inclusion.
- Extract `knife_snap_edge_in_angle` into a utility function.
- Check the snap vertex on closest edge instead of the face.
- Add MODE_INVOKING state.
- Remove unnecessary NULL checks.
- Control 'ignore_edge_snapping' while dragging instead of checking
dragging in `knife_snap_update_from_mval`.
Ref D8220
This enables ASAN support when used with VS 16.9
enable as usual in cmake with the WITH_COMPILER_ASAN
option, or when using make.bat just tag on `asan'
to the invocation, ie: `make lite 2019 asan`
MSVC: Asan support for 16.9
This enables ASAN support when used with VS 16.9
enable as usual in cmake with the WITH_COMPILER_ASAN
option, or when using make.bat just tag on `asan'
to the invocation, ie: `make lite 2019 asan`
Differential Revision: https://developer.blender.org/D7794
Reviewed By: brecht, sergey
`av_seek_frame()` failed to seek to nearest I-frame. This seems to be
a bug or not implemented feature in FFmpeg. Looks like same issue as
ticket https://trac.ffmpeg.org/ticket/1607 on ffmpeg tracker.
If seeking is done using format specific function (`read_seek2`)
field of `AVInputFormat` is set, `see av_seek_frame()`, use
`av_seek_frame()` function. Otherwise use wrapper that actively searches
for I-frame packet.
Searching is flexible and tries to do minimum amount of work. Currently
it is limited to equivalent of 25 frames, which may not be enough for
some files, but there may be files with no I-frames at all, so it is
best to keep this limit as low as possible. Previously this problem was
masked by preseek, which was hard-coded to 25 frames. This was removed
in rB88604b79b7d1.
If this approach would be unnecessary for some formats, in worst case
file would be seeked 2 times which is very fast, so there will be no
visible impact on performance.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10845
Add fit_method argument to new movie and image RNA API functions.
This argument is optional.
ref T86925
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10816
When adding images with operator, image file path is split into filename
and directory passed to load function in name and path fields of
SeqLoadData struct. This is because when loading images directory
and filenames are split.
RNA API function passes whole path in path filed.
Apart from loading API inconsistency, this causes initial image loading
to fail, so strip resolution is not set. Also name field of SeqLoadData
should be reserved for strip name.
Let operator code concatenate and split filepath when needed so loading
API can be consistent with RNA API and also between strip types.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10818
As the Snap Gizmo properties are used as return of snapping values and
therefore updated with each change, use callbacks to get these values
through RNA properties.
Differential Revision: https://developer.blender.org/D8525
Makes it slightly easier to test whether the installed module works
or not. Depends on D10656
Ref T86579
Reviewed By: mont29, campbellbarton
Differential Revision: https://developer.blender.org/D10665
Avoid CTest errors and exit codes due to test failures which depend
on Blender executable.
Ref T86579
Reviewed By: mont29, campbellbarton
Differential Revision: https://developer.blender.org/D10656
Old code's `install` step did not guarantee that all script files
will be copied from source folder to build folder _before_ copying from
build folder to site-packages. That caused incomplete installation.
Fixed by copying scripts etc., only once. Also match the behavior on
Linux: install to site-packages only if `WITH_INSTALL_PORTABLE` is OFF.
Also fix install and launch issues with Xcode.
When interpolate, the stroke order was not correct because it was assumed the GHash iter would return the items in the same order of insertion, but this is false.
Now, a list is used to keep the order of the strokes and the Hash is used to get the relationship between strokes as before.
The file was not really corrupted (as in, Blender did everything
correctly while saving). I only did not consider the case when
a .blend file is resaved in an older version before.
The issue was caused by handles not being written to the new mask
spline shape: it was always written as (0, 0), which was making the
handle calculation go wrong later on.
Solved by allocating a temporary array of bezier points and calculating
handles for them. While this is an extra array allocation it is only
done for a small amount of points and it is not in the critical code
path. Having this as an extra array helps to overcome a limitation of
the current mask shape API.
Additionally, disable the interpolation for the shape change:
the spline is brand new, there is nothing to be interpolated there.
When reading metadata from image files the metadata is trimmed to 1024.
For cryptomatte the metadata can contain json data and should not be
trimmed. Resulting additional checks in the manifest parser for
incomplete json data.
You could argue to add an exception for cryptomatte, but that would
still allows misuse. When the direction of this patch is accepted we
should consider removing `maxlen` from `IDP_AssignString` as it
doesn't seem to be used anywhere else.
Reviewed By: #images_movies, mont29, sergey
Differential Revision: https://developer.blender.org/D10825
Since a few releases it is possible to process Blenders images much
more effficiently than before thanks to the `foreach_get`/`foreach_set`
methods. This new template shows how those methods can be used together
with numpy.
Differential Revision: https://developer.blender.org/D9400
Initially this is a typo when solving merge conflict back in 2017
in commit rBf4140f2c8138.
The code was so for 3 years, so it is safer to assume that this is
the new expected design. The affected codepath only comes from the
BKE_object_modifier_update_subframe() which is discouraged from use
and have other issues.
Eventually those offending codepaths will be removed completely.
The grade-schema for now is more localized: remove ID_RECALC_ALL
which seems to be misused and is causing issues like the ones which
are described and discussed in T81340.
On user level there should be no measurable changes. In fact, no
functional changes at all are expected to happen.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D9220
This makes regular development more pleasant, because one does not have
to fix unrelated clang tidy mistakes when one is in the middle of something.
Before this change, I would usually turn clang-tidy off entirely, but then
forget to turn it on again.
This change has been agreed on by Sergey as well.
Fix the data management bug where evaluation of lattice objects would
write back to the CoW copy of the Lattice ID, even when that copy was
shared between objects.
Each lattice object evaluation now stores its own evaluated data copy
via `BKE_object_eval_assign_data()`.
Reviewed By: sergey
Maniphest Tasks: T78650
Differential Revision: https://developer.blender.org/D10790
Previously, the code expected the id property to have the `IDP_FLOAT` type.
However, when assigning a Python float (which is a double internally)
to an id property, it would change the type to `IDP_DOUBLE`.
The fix is to allow both types in the geometry nodes modifier.
UI hints should only be modified when the depsgraph is active.
Otherwise two threads evaluating the same object in different depsgraphs
can conflict with each other.
This is functionality that isn't accessible via the user interface. The
API allows the creation and modification of an override template that
holds rules that needs to be checked when overriding the asset.
The API is setup that it cannot be changed after creation. Later on when
the system is more mature we will allow changing overrides operations.
NOTE: This is an experimental feature and should not be used in productions.
Reviewed By: mont29, sebbas
Differential Revision: https://developer.blender.org/D10792
Respect the distance argument to EDBM_face_find_nearest,
when zero, sample a single pixel, otherwise sample a region.
Knife uses the selection-buffer to pick a face when the ray-cast failed.
This was meant to allow snapping to nearby faces however as the margin
was ignored, it was only used in edge cases where the ray-cast missed
but the pixel didn't.
Now the face-picking threshold is working as expected.
Note that other callers to EDBM_face_find_nearest have been updated
so set their distance argument to zero so this only impacts the knife.
Regular selection and path select could be modified separately if users
prefer this behavior.
Resolve logical error in edbm_shortest_path_pick_invoke
where any discrepancy between EDBM_unified_findnearest and
edbm_elem_find_nearest caused the active-object to be cleared.
While it's not a problem at the moment, using a larger threshold
for path picking exposes the error.
In this case, the cage location was left zeroed which was then
projected back onto the screen to find the nearest screen space
edge/vertex.
This made snapping to the vertex/edge fail in some corner-cases
where it was intended to work.
This is an implementation of Enhanced Subpixel Morphological Antialiasing (SMAA)
The algorithm was proposed by:
Jorge Jimenez, Jose I. Echevarria, Tiago Sousa, Diego Gutierrez
This node provides only SMAA 1x mode, so the operation will be done with no spatial
multisampling nor temporal supersampling. See Patch for comparisons.
The existing AA operation seems to be used only for binary images by some other nodes.
Using SMAA for binary images needs no important parameter such as "threshold", so we
perhaps can switch the operation to SMAA, though that changes existing behavior.
Notes:
1. The program code assumes the screen coordinates are DirectX style that the
vertical direction is upside-down, so "top" and "bottom" actually represent bottom
and top, respectively.
Thanks for Habib Gahbiche (zazizizou) to polish and finalize this patch.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D2411
Reduce the maximum number of queries to find the face under the
mouse cursor from 6x to 2x on cursor motion.
Calculating the screen-space detail could perform 2x look-ups
which have already been calculated.
Knife snapping logic assumed having a face under the cursor meant
the projected positions were set.
This is not always the case as failure to ray-cast uses the back-buffer
as a fallback.
The python exporter was stricter about what Principled BSDF node it
would use -- it only wanted one directly attached to the Material Output.
Also, the Python exporter sets the ambient to (1,1,1) if no reflections.
And there was a mistake in how the C++ exporter set the illumination model.
Also printed out the components in the same order as the python one,
for easier comparison.
The code was writing out all of the materials for each object.
Refactored so that the materials for all objects are gathered
together, deduping, and writing out at the end of a frame.
For projection painting tools besides the `DRAW` tool:
- Don't show the texture from viewport stencil drawing.
- Don't show the texture panel.
Based on D10564 by @lichtwerk with own changes.
Check for indirect ID use after other simple user count checks are made.
Also assert ED_object_base_free_and_unlink_no_indirect_check object
argument isn't indirectly used.
The grease-pencil parent check was enabled when deleting objects,
when previously it was only done when unlinking.
While harmless, the previous logic is correct.
da160dc32d exposed a bug in
`BKE_id_multi_tagged_delete` causing a memory leak in soft-body that
made `physics_softbody` test fail.
Use a loop to remove ID's to keep tests working until T86992 is fixed.
Tracing images to grease pencil objects creates sometimes artifacts, as seen, for example, when tracing the attached image. {F9910821}
I have found the same behavior both in the 2.92 release and in the current 2.93 master.
The artifacts are caused by a variable that's not initialized or updated when finding a point tagged as POTRACE_CORNER.
This patch solves this issue.
Maniphest Tasks: T86967
Differential Revision: https://developer.blender.org/D10832
- comment added in struct `KnifeTool_OpData`
- struct pointer name `lst` updated to `list` ( Guess its more readable )
- `KNF_MODEL_IGNORE_SNAP_ON` updated to `KNF_MODAL_IGNORE_SNAP_ON`
- `KNF_MODEL_IGNORE_SNAP_OFF` updated to `KNF_MODAL_IGNORE_SNAP_OFF`
Ref D10824
The `object_delete_exec` lead to `BKE_library_ID_is_indirectly_used`
being called twice. With this patch deleting is around 20% faster.
Example when deleting 10000 objects:
Current: 35.6s
This patch: 18.8s (updated, last rev 29.7s)
Reviewed By: campbellbarton
Ref D9857
If window is maximized when toggling fullscreen, go back to maximized when done.
Differential Revision: https://developer.blender.org/D10813
Reviewed by Harley Acheson
Changes made:
* Add OpenMP linker flags.
* Copy the libomp.dylib to `2.93/lib/libomp.dylib`.
* Change the `LC_LOAD_DYLIB` item such that
the lib is found at `bpy.so/../../Resources/2.93/lib/libomp.dylib`.
Installation is done by D10664.
Reviewed By: #platform_macos, brecht
Maniphest Tasks: T86579
Differential Revision: https://developer.blender.org/D10657
When the window is already maximized allow covering Windows Taskbar when toggling fullscreen.
Differential Revision: https://developer.blender.org/D10811
Reviewed by Harley Acheson
One can only resync, reset, delete etc. locl overrides, linked ones are
basically regular linked IDs and fully not editable.
Reported by Demeter from the Studio, thanks.
Although "Grid" may not be techincally correct since a grid could be 3D,
it was decided to rename the "Plane" primtive to "Grid". The primitive
node allows subdivisions, so the name is more consistent with the
operator in the 3D view.
Ref T86819
This commit includes a file subversion bump for the versioning.
Changing to a more informative 'Weight Paint' rather than 'WPaint'.
Differential Revision: https://developer.blender.org/D9905
Reviewed by Julian Eisel
Change `float to boolean` and `int32 to boolean` to return false for zero and negative values.
This aligns with how artists would expect these values to work. This is in contrast to what a coder would expect. It was determined on blender.chat that this was a better default. This means that a negative float value would give a boolean false.
Change `Color4f to boolean` to return false for zero and negative grayscale values.
Likewise, for color to boolean, to account for negative value colors, the grayscale value would be used for determining if a colour was false or not.
See {T86454}
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10685
Activation distance for multi input sockets had different length
dependend of dpi factor. That caused jumping when activation distance
became shorter than snapping distance.
Fixed by removing activation distance and using same function
which is used to evaluate snapping.
Reviewer: Dalai Felinto
Differential Revision: https://developer.blender.org/D10809
Add a basic OSL shader that shows how inputs
and outputs work and do some simple math with
them.
This template is a happy medium between the
templates we already ship, empty_shader is a
little too bare, and the other templates are
a little "too much" and you end up having to
delete a whole bunch of stuff.
a great starting point for some experimentation!
Differential Revision: https://developer.blender.org/D9933
reviewed by: brecht
The "Enable physics for:" text makes no semantic sense- i.e.
"Enable physics for Fluid". Additionally, the leading text is just not
necessary, this section is just as clear without it.
Differential Revision: https://developer.blender.org/D10537
This patch adds support for the remaining operations of the Vector Math
node within Geometry Nodes. While the operations are already available
in the UI, they hadn't been implemented, yet. With this patch the node
uses the implementation that was added for the Attribute Vector Math
node - similar to how it's handled with the Math node and Attribute
Math node.
Differential Revision: https://developer.blender.org/D10650
Warnings in tooltips were using inconsistent formatting, some in
parantheses, some not, some in caps, others not, some on new lines,
some not, etc.
This patch uses a consistent new line and no capitals for these cases.
Differential Revision: https://developer.blender.org/D9904
Now that we have `ATTR_DOMAIN_AUTO`, it makes sense to use it to skip
automatic domain interpolation. This can make code that depends on the
non-interpolated domain of the attribute a bit simpler.
Added support for compositor tests. Compositor tests can be added, executed and viewed in a similar way to cycles
and other render engines tests.
Running test:
`ctest -R compositor`
Updating test:
`BLENDER_TEST_UPDATE=1 ctest -R compositor`
Viewing test results:
typically saved under `build_folder/tests/compositor/report.html`
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6334
The calculation of the 2D point was wrong when using orthographic mode.
Also small cleanup in float3 variable.
Differential Revision: https://developer.blender.org/D10828
SocketReader was added as an easier to understand interface on top of
the NodeOperation. It was implemented as a base class of the
NodeOperation and adds an additional hierarchy level.
Ths change replaces the abstract class with a typedef. In the end we
want to remove the typedef but will wait for some new nodes before doing
so.
Generalize threading settings in proxy building and use them for encoding
and decoding in general. Check codec capabilities, prefer FF_THREAD_FRAME
threading over FF_THREAD_SLICE and automatic thread count over setting it
explicitly.
ffmpeg-codecs man page suggests that threads option is global and used by
codecs, that supports this option. Form some tests I have done, it seems that
`av_dict_set_int(&codec_opts, "threads", BLI_system_thread_count(), 0)`
has same effect as
```
pCodecCtx->thread_count = BLI_system_thread_count();
pCodecCtx->thread_type = FF_THREAD_FRAME;
```
Looking at `ff_frame_thread_encoder_init()` code, these cases are not
equivalent. It is probably safer to leave threading setup on libavcodec than
setting up each codec threading individually.
From what I have read all over the internet, frame multithreading should be
faster than slice multithreading. Slice multithreading is mainly used for low
latency streaming.
When running Blender with --debug-ffmpeg it complains about
`pCodecCtx->thread_count = BLI_system_thread_count()` that using thread count
above 16 is not recommended. Using too many threads can negatively affect image
quality, but I am not sure if this is the case for decoding as well - see
https://streaminglearningcenter.com/blogs/ffmpeg-command-threads-how-it-affects-quality-and-performance.html
This is fine for proxies but may be undesirable for final renders.
Number of threads is limited by image size, because of size of motion vectors,
so if it is possible let libavcodec determine optimal thread count.
Performance difference:
Proxy building: None
Playback speed: 2x better on 1920x1080 sample h264 file
Scrubbing: Hard to quantify, but it's much more responsive
Rendering speed: None on 1920x1080 sample h264 file, there is improvement with codecs that do support FF_THREAD_FRAME for encoding like MPNG
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10791
Split seeking section of `ffmpeg_fetchibuf()` function into multiple
smaller functions.
Conditional statements are moved to own funtions with human readable
names, so code flow is more clear.
To remove one branch of seeking, first frame is now decoded by
scanning, which will do only one iteration. So nothing has technically
changed.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10638
This adds a Clamp node for Geometry Nodes Attributes.
Supports both Min-Max and Range clamp modes.
Float, Vector, Color and Int data types supported.
Reviewed By: HooglyBoogly, simonthommes
Differential Revision: https://developer.blender.org/D10526
As a rather premature optimization from rBbbe6d4492823, Object bounds
were only computed when either the Object or its Geometry were modified.
Prior to rB42198e9eb03b, this would work, as the Geometry was tagged as
modified if the Object's transform was also modified.
Since this tagging is not done anymore due to side effects, and since at
the time bounds are computed Objects were already processed and tag as
unmodified, the check on the modified status was always false.
For now remove this check, so the bounds are always unconditionally
updated. If this ever becomes a performance problem in large scenes with
motion blur, we will then try to find a way to nicely optimize it.
This would only affect BHV2 as OptiX and Embree handle object bounds
themselves.
When an addon has been removed, but its `.pyc` files are still there,
the Python module can still be loaded. However, because `__init__.py` is
missing, it becomes a namespace instead of a module, and its `__file__`
will be set to `None`. As a result, it's impossible to get the mtime
from the file (because there is none).
This should not influence any regularly uninstalled add-on, as that
would just remove the add-on's directory; I ran into the problem when
switching Git branches caused an add-on's Python files to disappear
while keeping the `__pycache__` directory around.
When rendering with cycles at some point the manifest is trimmed. This
leads to incomplete/corrupted metadata. This patch will make sure that
the manifest parser doesn't crash.
This solved the issue when the manifest is trimmed at the start of a
hash. Eg '"Name":"'.
This commit adds a node with a "Map Range" operation for attributes
just like the non-attribute version of the node. However, unlike the
regular version of the node, it also supports operations on vectors.
Differential Revision: https://developer.blender.org/D10344
This adds a new RNA method `Action.flip_with_pose(ob)` to flip the
action channels that control a pose.
The rest-pose is used to properly flip the bones transformation.
This is useful as a way to flip actions used in pose libraries,
so the same action need not be included for each side.
Reviewed By: sybren
Ref D10781
Support a cache for fast RNA path look-ups for RNA-path + index.
Unlike a regular hash lookup, this supports using a single lookup
for the RNA path which is then used to fill an array of F-curves.
Reviewed By: sybren
Ref D10781
This function returns an array of keyed frames with rounding,
to avoid duplicates caused by subtle floating point difference.
Reviewed By: sybren
Ref D10781
The recent commit that changed the size (rB83df3545246aada) left out
a few changed. This patch also adjusts the positioning and UV scale of
the generated plane accordingly.
Differential Revision: https://developer.blender.org/D10822
Purely local IDs would not always be used as proper barriers when
generating override hierarchy data, leading to imporperly trying to
resync override IDs from other hierarchies, which would break/cause
issues in case they would be duplicate overrides of the same linked
data.
Reported by Pablo from Sprite team, thanks.
We do not want to re-generate auto-overrides until everything that
needed to be resynced has been resynced. Otherwise it's a waste of time
and guaranteed loss of some override properties.
Mistake in rB9947f2095610 earlier today.
This will allow retrieving the instance groups from multiple geometry
sets and avoiding needing vectors of vectors to store the results.
This is useful when retrieving instances from a multi-input socket
of geometries.
select
In 'Set/Replace' mode this is not a problem, but 'Extend' or 'Subtract'
modes were useless with the current behavior.
The problem here is that 'node.select' fires before 'node.select_box'
(which is fine) but deselects immediately on click.
This issue has come up before in other editors, see
{T70457}
{rB395dfff103e1}
{rBa8ea1ea1b7d5}
Now delay deselection in empty space to mouse release (same as done in
before mentioned report).
also related:
ref T57918
ref T63994
Maniphest Task: T86867
Differential Revision: https://developer.blender.org/D10801
Replacing a hard-coded font size with font style widget size so it can be set by user.
Differential Revision: https://developer.blender.org/D10819
Reviewed by Dalai Felinto
account
UV coords are scaled by aspects (see UVsToTransData). This also applies
for the Cursor in the UV Editor which also means that for display and
when the cursor coords are flushed (new 'recalcData_cursor_image' was
added for this), these need to be converted each time.
Maniphest Tasks: T86796
Differential Revision: https://developer.blender.org/D10817
This flags moving the cursor in the Image Editor T_2D_EDIT with the
following benefits:
- dissallowing e.g. Z constraints
- improving the header display:
-- it should not use scene units
-- now respects if we are moving in pixel coords or not
part of upcoming fix for T86796
ref D10817
When subscribing to name-changes through the API,
the event doesn't trigger if the object is renamed in the outliner.
Fixed by publishing the RNA changes.
Reviewed By: lichtwerk
Ref D10732
This was only happening without an active object.
The "Operator Cheat Sheet" operator collects info about all operators,
and as part of that executes the callbacks to create dynamic enums. The
callback to enumerate the geometry operators (introduced in
rB370d6e50252b) attribute domains depends on a context object. If this
isn't available, we just have to return `DummyRNA_NULL_items`.
Maniphest Tasks: T86921
Differential Revision: https://developer.blender.org/D10814
Revert "Point users to new location of "Show Group Colors" option",
commit rB6ed6741ee35930bf81fad9a5eb6bb17eea168725.
These deprecation hints were intended for one release only, and thus can
be removed now.
This patch renames two domains:
* `Polygon` -> `Face`
* `Corner` -> `Face Corner`
For the change from `polygon` to `face` I did a "deep rename" where I updated
all (most?) cases where we refere to the attribute domain in code as well.
The change from `corner` to `face corner` is only a ui change. I did not see
a real need to update all code the code for that. It does not seem to improve
the code, more on the contrary.
Ref T86818.
Differential Revision: https://developer.blender.org/D10803
CacheFile writing code would not write generic ID data (call for it has
been missing since the initial commit, rB61050f75b13e).
While potentially affecting other areas (mostly CustomProperties/IDProperties),
this was a critical failure for liboverrides. Also added some workaround
code to allow opening broken files (though the override of the CacheFile
data-block will be lost).
This makes the buttons drawn on nodes for unconnected string and color
sockets draw with the correct 40% ratio for the label split rather than
the old 50% ratio not used elsewhere in Blender anymore. The benefit is
a cleaner look, because the button edges line up better with others, and
a bit more space to type in attribute names.
rBa8a92cd15a52 was adding external libraries includes to `INC`, which is
reserved to internal project includes.
`INC` does not allow duplicates, and when using system libs both PugiXML
and Haru headers are under the same path.
We would not add the "object line art" enum to the operator enum list,
if there were no active object in the scene.
This would make it impossible to call this operator from python code as
the enum would we hidden when we were not in a viewport context.
Always make the operator available, having no active object is not a
strict requirement for the operator to work, so expose it always.
Without `calc_object_remap` turned off in the conversion to and from
BMesh for the primitive nodes, the `CD_ORIGINDEX` custom data layer
has incorrect values. By using a different function to do the conversions,
we can avoid this problem.
Thanks to Jacques for finding the fix here.
Differential Revision: https://developer.blender.org/D10805
This error was produced because now it is possible to have several Lattice modifiers and the Bake was removing the lattice data of all modifiers.
Now the data is only recalculated and removed for the current modifier.
Also some cleanup of comments.
This patch adds support to export and import grease pencil in several formats.
Inlude:
* Export SVG
* Export PDF (always from camera view)
* Import SVG
The import and export only support solid colors and not gradients or textures.
Requires libharu and pugixml.
For importing SVG, the NanoSVG lib is used, but this does not require installation (just a .h file embedded in the project folder)
Example of PDF export: https://youtu.be/BMm0KeMJsI4
Reviewed By: #grease_pencil, HooglyBoogly
Maniphest Tasks: T83190, T79875, T83191, T83192
Differential Revision: https://developer.blender.org/D10482
Added a condition to the poll so that it ignores drag and drop on the button. The Paste Name operator is just not implemented. Doesn't work for shading nodes either.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D10769
Add missing call to ED_node_tag_update_nodetree which solves the missing update on initial drag.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D10769
Move Palettes type with other weird, not-really-data ID types (like
PaintCurves and Brushes), higher in the process.
Those preset-like types may use a lot of other ID types, but should only
be used by UI-related (and Scene, for tool settings) types.
Move Brushes type with other weird, not-really-data ID types (like
Palette and Brushes), higher in the process.
Those preset-like types may use a lot of other ID types, but should only
be used by UI-related (and Scene, for tool settings) types.
Move PaintCurve type with other weird, not-really-data ID types (like
Palette and Brushes), higher in the process.
Those preset-like types may use a lot of other ID types, but should only
be used by UI-related (and Scene, for tool settings) types.
Move `OB_GR` processing just after scenes, and before objects.
This is much more sensible in general, and fixes glitches in auto-resync
process of library overrides in particular.
Using the button context for operators is useful for other cases as well (where
the operator isn't the button operator itself). For example we'll need this for
the asset view UI template, where there will be additional operators that
should be able to act on button context.
Currently the procedural will add an entry to the cache for every frame
even if the data only changes seldomly. This means that in some cases we
will have duplicate data accross frames.
The cached data is now stored separately from the time information, and
an index is used to retrieve it based on time. This decoupling allows
for multiple frames to point to the same data.
To check if two arrays are the same, we compute their keys using the
Alembic library's routines (which is based on murmur3), and tell the
cache to reuse the last data if the keys match.
This can drastically reduce memory usage at the cost of more processing
time, although processing time is only increased if the topology may
change.
In order to update the BVH when only the transformations are changing,
we would tag the Object's Geometry as modified. However, when
displacement is used, and the vertices were not themselves modified,
this would cause us to redo the displacement on already displaced
vertices.
To fix this, use a specific update flag for detecting and notifying that
transformations were modified.
Regression caused by rBbbe6d44928235cd4a5cfbeaf1a1de78ed861bb92.
Make sure we have valid links and link pointers using
'ntreeUpdateTree()'.
Maniphest Tasks: T86314
Differential Revision: https://developer.blender.org/D10793
The problem happened when the selection only allowed "single_islands"
(only vertices are selected, no edges or faces).
The result of `is_zero_v3(v->no)` was erroneously being compared to `0.0f`
This commit corrects the wrong condition and optimizes it by adding a
earlier return when the islands don't need to be calculated.
(It also improves the code's readability by joining some variables in the
`struct TransIslandData`).
This adds a `BLI_assert_unreachable()` macro, that should be used instead
of `BLI_assert(false)` in many places.
* `BLI_assert_unreachable` provides more information than `BLI_assert(false)`
to people reading the code.
* `BLI_assert_unreachable` will print an error to `stderr` in a release build.
This makes it more likely that we will get bug reports when the assumptions
of a developer were wrong.
Differential Revision: https://developer.blender.org/D10780
- Use constexpr for better readability.
- Split in functions per backend.
- Split work scheduler global struct in smaller structs.
- Replaced std::vector with blender::Vector.
- Removed threading defines in COM_defines.h
Linked data should only be duplicated if relevant `eDupli_ID_Flags` flag
is set (`USER_DUP_LINKED_ID`), this is being taken care of by generic
`BKE_id_copy_for_duplicate` function, but for some reasons (?)
`BKE_object_duplicate` was directly using `BKE_id_copy` for itself...
Note that this had especially bad consequences when duplicating
overrides of collections...
It makes more sense to avoid mixing the primitives with other mesh
operations. We considered adding a "Mesh" prefix to the names too,
but decided to prioritize improvements to the node search menu instead,
and only consider that if there is an overlapping prefix name for
another data type.
The crash is caused by an out of bound access in the kernel due to
missing data update when a Volume's voxel data changes. Although the
previous bounding mesh is cleared, the Volume Node was not tagged as
modified, and therefore never rebuilt.
To fix this, tag the Geometries (not just Volumes, to be more robust) as
modified in Geometry.clear().
Regression caused by rBbbe6d44928235cd4a5cfbeaf1a1de78ed861bb92.
Crash occurs at `assert(builder->index_len < builder->max_index_len)`.
Non-bezier nurbs were being created with abnormal values causing the
causing edge count in the draw manager to be incorrect.
This commit also deduplicates and adds descriptions to the code.
Thanks @PratikPB2123 for pointing out where the error is.
Currently viewers and previews only display node trees that have at least one node with fixed resolution size. When all inputs are generated, nothing is displayed in most cases (RGB Node is displayed as a single pixel on previews). By generated I mean inputs not having resolution on their own, they create content dynamically given an output resolution.
This patch adds support for those cases by using an appropriate preferred resolution on Viewers/Previews which propagates to generated inputs as output resolution. Now:
- Viewers will display generated inputs with scene render resolution.
- Previews will display them with scene aspect ratio.
This is consistent with final render result and respects relative space.
The benefit for the user is being able to compose images without any input source. For example for creating mask images or simple backgrounds.
Reviewed By: Jeroen Bakker
Differential Revision: https://developer.blender.org/D10611
The goal of this patch is to remove the boilerplate code required to get
a string property that maps to an allocated char pointer in dna.
Previously, one to to provide three callbacks, all of which are not necessary
anymore for a simple string property.
Currently, when an empty string is assigned, the `set` function will always
allocate it as well, instead of assigning `NULL` to the pointer. Some structs
might support `NULL` while others don't, so this is the safer option for now.
Differential Revision: https://developer.blender.org/D10773
There were multiple cases that could lead to problems like moving meta
strip into itself or into it's children meta strips.
Print error string to console when invalid action is requested.
Cycles, Eevee, OSL, Geo, Attribute
Based on outdated refract patch D6619 by @cubic_sloth
`refract` and `faceforward` are standard functions in GLSL, OSL and Godot shader languages.
Adding these functions provides Blender shader artists access to these standard functions.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D10622
Currently, when a taper object is specified, the radius of the spline is
ignored. This patch adds a new option to control how the taper object
affect the effective radius of the spline. The option allow three modes
of operation:
- Override: The old method. The radius of the spline is ignored and
overridden.
- Multiply: The radius of the spline is multiplied by the taper radius.
- Add: The radius of the spline is added to the taper radius.
Ref D10779
Sorting of links on multi-input sockets where not recalculated after
using the knife operator. Added call to resort function before
cutting operator finishes.
Reviewer: Jacques Lucke
Differential Revision: https://developer.blender.org/D10783
- Rename:
`BKE_gpencil_object_material_get_index_name`, to
`BKE_gpencil_object_material_index_get_by_name`
Matching `BKE_gpencil_layer_get_by_name`.
- Move logic to ensure named materials into a new function:
`BKE_gpencil_object_material_ensure_by_name`
No need for a module to define a single panel, since this is an
object panel it can be included with other object panels.
If centralizing line-art properties is needed in the future,
this can be done in a `*_common` module.
In this case both the mirror object and object itself moving in time may
change the geometry and must be checked.
Differential Revision: https://developer.blender.org/D10757
In some multi-functions (such as a simple add function), the virtual method
call overhead to access array elements adds significant overhead. For these
simple functions it makes sense to generate optimized versions for different
types of virtual arrays. This is done by giving the compiler all the information
it needs to devirtualize virtual arrays.
In my benchmark this speeds up processing a lot of data with small function 2-3x.
This devirtualization should not be done for larger functions, because it increases
compile time and binary size, while providing a negilible performance benefit.
Following some discussion among the geometry nodes team, it was decided
that keeping the primitive nodes simpler and requiring a separate
transform node to move the generated geometry from the origin would
be better.
- It's more consistent with the current general idea of "building
block nodes"
- It makes more sense for the future when it will be possible to
use instancing to control the transforms.
- It reduces UI clutter when the controls are not necessary.
Although it works well in most cases, the algorithm to detect if a point
is within the limits of the camera does not work well in othographic mode.
This commit also adds the option `V3D_PROJ_TEST_CLIP_FAR` (currently unused).
Differential Revision: https://developer.blender.org/D10771
The issue was caused by the prefetch code having LOCK_MOVIECLIP lock
acquired while reading frames from the movie files. The need of the
lock was coming from the fact that `clip->anim` can not be accessed
from multiple threads, so that was guarded by a lock. The side effect
of this lock was that the main thread (from which drawing is happening)
did not have any chance passing through it in the cache code because
the prefetch happens so quickly.
The solution is to create a local copy of the clip with its own
anim handler, so that read can happen without such lock.
The prefetch is slower by an absolute number in seconds (within 10%
in tests here), but it is interactive now.
Re-adds a legacy document icon for macOS 10.14 Mojave that is
consistent with the system generated document icon on macOS 11
Big Sur. It uses the old-style document sheet icon, but includes the
file extension underneath the Blender icon (unlike the previous
legacy document icon that was removed in D10267).
Adds the missing description for the exported type identifier.
Finder now correctly displays “Blender File” instead of “data”
for Blender files.
Differential Revision: https://developer.blender.org/D10746
The root of the issue was caused by the PredictMarkerPosition()
always returning false when tracking backwards. This was making
it so tracker always had to run brute initialization, which is
an expensive operation.
From own timing here:
- Tracking forward takes 0.667637 seconds
- Tracking backward used to take 2.591856 seconds
- Tracking backward now takes 0.827724 seconds
This is a very nice speedup, although the tracking backwards is
still somewhat slower. Will be investigated further as part of
a regular development.
Code rebuilding/ensuring the sanity of the collection hierarchy was not
checking for a same collection being child of the same parent multiple
times.
This was already prevented to happen in code adding collections to other
collections, but not for the remapping case.
In collection/viewlayer synchronization code, in some cases, there are
extra unused view layer collections left in old list after all needed
ones have been moved to the new list.
Found while working on T86741.
Previously, different Random Float nodes would generate different values
depending on where they are in the node group hierarchy. This can be useful,
but should definitely not be the default behavior, because it is very inconsistent
with other nodes.
Previously, the signature of a `MultiFunction` was always embedded into the function.
There are two issues with that. First, `MFSignature` is relatively large, because it contains
multiple strings and vectors. Secondly, constructing it can add overhead that should not
be necessary, because often the same signature can be reused.
The solution is to only keep a pointer to a signature in `MultiFunction` that is set during
construction. Child classes are responsible for making sure that the signature lives
long enough. In most cases, the signature is either embedded into the child class or
it is allocated statically (and is only created once).
Added a first test case for review. This will be the base for future test cases.
The current API is sufficient for what is expected for such a low level API.
One concern is that you need to trigger a save in order to update the library overrides
structure. Not expected from TD/Dev point of view.
Test cases are very important when implementing restrictive mode as it is a second evaluation mode that
has impact on the (current) permissive mode.
Reviewed By: Sebastián Barschkis, Bastien Montagne
Differential Revision: https://developer.blender.org/D10747
The impact of translations on UI performances is neglectable, and this
gives better handling of some odd cases where original language of an
add-on is not English.
Currently 3 of the printf lines use the format specifier "%lu" for data
of type size_t instead of "%zu". While this works, this creates compiler
warnings.
This diff fixes those warnings by using the correct format specifier.
Tested using MSVC, but should be correct on any compliant compiler.
Reviewed By: Sebastian Parborg
Differential Revision: http://developer.blender.org/D10761
- Use `use_` prefix for boolean properties.
- Use `_all` instead of `_everything`,
following existing conventions and the properties UI text.
- Use `object_instances` instead of old term `dupli` / `duplication`.
- Use `clip_plane` instead of `clipping_boundaries`,
matching the RegionView3D property naming.
When a function is executed for many elements (e.g. per point) it is often the case
that some parameters are different for every element and other parameters are
the same (there are some more less common cases). To simplify writing such
functions one can use a "virtual array". This is a data structure that has a value
for every index, but might not be stored as an actual array internally. Instead, it
might be just a single value or is computed on the fly. There are various tradeoffs
involved when using this data structure which are mentioned in `BLI_virtual_array.hh`.
It is called "virtual", because it uses inheritance and virtual methods.
Furthermore, there is a new virtual vector array data structure, which is an array
of vectors. Both these types have corresponding generic variants, which can be used
when the data type is not known at compile time. This is typically the case when
building a somewhat generic execution system. The function system used these virtual
data structures before, but now they are more versatile.
I've done this refactor in preparation for the attribute processor and other features of
geometry nodes. I moved the typed virtual arrays to blenlib, so that they can be used
independent of the function system.
One open question for me is whether all the generic data structures (and `CPPType`)
should be moved to blenlib as well. They are well isolated and don't really contain
any business logic. That can be done later if necessary.
We cannot use `std::variant` yet, because not all of the compilers
we support have a working version of it yet. For now, I just replaced
it with multiple `std::option` which is good enough, because currently
`CellValue` is only used for the cells that are actually drawn in
the spreadsheet.
When the movie wasn't found, uninitialized values would be used for
the original width/height.
Also use int instead of float as the image size is stored as an int.
SetWindowPos must be called after SetWindowLongPtr in order to see changes to window frame style.
Differential Revision: https://developer.blender.org/D10756
Reviewed by Ray Molenkamp
Some generic algorithms from the standard library like `std::any_of`
did not work with all container and iterator types. To improve the
situation, this patch adds various type members to containers
and iterators.
Custom iterators for Set, Map and IndexRange now have an iterator
category, which soe algorithms require. IndexRange could become
a random access iterator, but adding all the missing methods can
be done when it is necessary.
The description was missing from the Quick Liquid operator.
The fix adds the following description:
"Make selected objects liquid"
Reviewed By: sebbas
Maniphest Tasks: T86746
Differential Revision: https://developer.blender.org/D10777
The offset when creating the keyframes was set to `frame_target + i` but
`i` starts iterating from the current frame number.
The fix uses just `i` as the frame number.
Reviewed By: antoniov
Maniphest Tasks: T86745
Differential Revision: https://developer.blender.org/D10772
When joining curves, the resulting curve will inherit the bevel depth of
the active curve, but the radii would stay the same which leads to
changed appearance when joining.
Now compensate for this taking the different bevel depths into account
(if present).
Was a feature request here (and I also think we had reports about this
-- which were usually turned down as not-a-bug):
https://blender.community/c/rightclickselect/bhhbbc/
Differential Revision: https://developer.blender.org/D10752
- Adding effect strip resulted in strip with no name
- Adding sound strip attempted to read `fit_method` RNA property,
that did not exist, causing error messages in console
These issues were introduced in bbb1936411.
SEQ_add_effect_strip used SeqLoadData.image.end_frame to set end
frame. This was mistake introduced in last refactoring patch.
Use effect data, not image data, when adding effect strips.
Reviewed By: sergey
Differential Revision: D10633
When transition effect is placed between 2 adjustment layer strips,
only first adjustment layer was rendered by effect.
Limit timeline_frame range to adjustment strip frame range.
This timeline configuration is technically invalid, because strips
should overlap when using transition effect. This was never restricted
and instead of producing no image, transition effect used first and
last frame of source strip. Many users got used to this "feature" so
I think it make sense to fix this case so it behaves like other strip
types.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10562
- Make properties alligned
- Add decorate to volume
- Add heading to Grease Pencil and Transparent
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D10663
Add option to override current frame whem transforming strip handles.
Option can be found in View menu of VSE preview, or in timeline when
using backdrop.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D10424
- Position text in center of image
- Increase default font size so it's more visible
- Increase font size limit
- Increase limit for location, so text can be scolled off screen
- Wrap text by default
- Tweak default box and shadow color
- Change text shadow position
- Text box no longer casts shadow
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D10571
Bold and italic fonts can be switched quickly by presing corresponding
button.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D10542
`SequenceElement` type `orig_height` and `orig_width` members were
set to incorrect size when using proxies and not set when strip was
added which caused value to be unset.
Since now image dimensions must be read when strip is created,
these members can be initialized. When proxies are used, do not set
original size since it is not guaranteed, that proxies are exact size.
These values are not guaranteed to be up to date or exact. They should
be used for strictly informative purposes.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D6506
This function can be used to create empty meta strip, which is not
straightforward when using operators. Very useful for import/export
scripts.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D10661
This function can be used to move strips into meta strips with no
side effects like change of selection state.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D10759
This visualization of nested node groups makes it easier to debug
some issues. Muted nodes, muted links, reroute nodes and unavailable
sockets are removed from the visualization to keep it clean.
Nested node groups are visualized using colored clusters.
The new clamping works by modifying the lamp internal radius which
then soften the light contribution.
However this does remove more light compare to the old solution.
This is because the clamp now affects the light over a much larger
distance since it is smoother. Old scene needs manual tweaking.
Soft surface shadows were already supported but now we support
soft shadows of the volume themselves.
This is only enabled if the light casts shadow and the scene soft
shadows toggle is enabled.
Previously area lights were just considered as point lights.
We now use a "most representative point" technique that make the
light shape appearant and gives more homogenous result.
This technique is quite cheap but it is not physically correct.
So I came up with a power function to have almost the same intensity
output as cycles in the general case.
Sun lights are treated as distant light source and need to gather
shadowing from the full frustum.
This might have performance impact on certain scenes.
This adds 2 new sliders for light objects that modulates the diffuse
light and the volume light intensities.
This also changes the way volume light is computed using point lamp
representation. We use "Point Light Attenuation Without Singularity"
from Cem Yuksel instead of the usual inverse square law.
Previously we could crash because we would not check if the modifier in
question actually was a line art modifier. We also did not query if the
modifier was disabled.
This patch adds data about instances generated by geometry nodes
to the spreadsheet. The transform data is decomposed into position,
rotation, and scale, and there is a name column to display the name
of the instanced object or collection.
This data is implemented specifically for the spreadsheet, because
we're not sure that we want to expose this data as attributes for the
use elsewhere.
Differential Revision: https://developer.blender.org/D10770
The point separate node was failing in situations where one of the
outputs was empty. In addition, the code was not structured very well.
This new implementation stores less temporary information, is more
geometry component type agnostic, and is more self-descriptive.
It also solves the problems mentioned above.
Fixes T86573
Differential Revision: https://developer.blender.org/D10764
Make options that are usually only useful in edge cases off by default.
These settings would requite extra work and thus the modifier evaluation
would be needlessly slower as most users do not need these options to be
on.
It caused some chaining errors when used in combination with image space
chaining. After some internal discussion, we realized it is not
useful as chaining in image space essentially does the same thing.
Instead of storing those in scne's master collection, which is fairly
annoying, we now add them to a (hidden) specific collection. Easy to
ignore, or check and cleanup.
This is generally what people expect when generating a cone. Note that
this translation currently happens after the rotation, but since the rotation
will likely be removed in the future, that won't be a problem for long.
This patch adds the remaining 6 interpolations for mesh domains.
The new interpolations are:
- Corner / point / polygon to edge
- Edge to corner / point / polygon
After this it is possible to adapt an attribute to and from every
mesh domain. This is simple to test with the "Attribute Convert" node.
Though, as a note for the future, there are still some improvements
possible to the interpolations, like lazily calculating values for the
interpolations where it's possible, and slightly improving the
algorithms used for some interpolations, like using corner angles
for polygon to point.
Differential Revision: https://developer.blender.org/D10765
This is not only potentially extremely expensive, it is also fairly
futile, and code is not designed to handle it currently anyway (could
easily end up in inifinite loops and other crashes).
- Remove use of evaluated poses, instead calculate transformations
into an array which is applied afterwards.
- Only update ID's for poses that have been changed.
This is simply a convenience when using this type. More similar
constructors can be added in the future when they are useful.
Differential Revision: https://developer.blender.org/D10714
Allow python access to the `reset_view` functionality which before
was only available through the menu. This was suggested for
consistency after D10561.
Differential Revision: https://developer.blender.org/D10595
The size in the transform matrices was extra, since it is also
passed as an argument to the BMesh operators.
Differential Revision: https://developer.blender.org/D10763
Previously even if the input goemetry set had no point cloud or no mesh
instances, `geometry_set_realize_instances` would create empty data.
This isn't necessarily bad, but it can complicate things down the line if
there are a bunch of empty components getting passed around.
This was reported for geometry nodes, but was true for all nodetrees
(e.g. after deleting the active node). Geometry node trees just made
this more obvious since they start without an active node to begin with.
Fix provided by @lone_noel, thx!
Maniphest Tasks: T86677
Differential Revision: https://developer.blender.org/D10762
Caused by {rB2917f550caa9} which renamed the entry in the toolsystem,
but not the corresponding keymap.
Maniphest Tasks: T86548
Differential Revision: https://developer.blender.org/D10725
Since {rB46aa70cb486d}, using `NC_SPACE | ND_SPACE_VIEW3D` as notifier is
restricted to space data as a reference. This was still used though for
RNA updates in other places (namely `rna_camera`, `rna_scene`,
`rna_animviz`), and passing NULL would automatically set the notifier
reference to the owner id. Above commit would happily filter these out,
leading to missing refreshes.
Now use more specific notifiers (in case of animviz a new
`ND_DRAW_ANIMVIZ` was added).
This was reported for Camera background images btw.
Fixes T86670.
Maniphest Tasks: T86670
Differential Revision: https://developer.blender.org/D10758
Data-block selectors (or other selectors using the
`UILayout.teamplate_search` or `UILayout.template_search_preview`)
in headers used a fixed size width for the name button. Often that meant
the text would be clipped to fit even though there was plenty of
whitespace surrounding the data-block selector.
Now the name button can increase in width with the contained string,
clamped to some arbitrary and quite big maximum (3 times the minimum
width).
We could further take the available space into account, to reduce the
need for scrolling in the header. But I don't think that is much of an
issue and the name clipping it would re-introduce would probably be more
annoying.
Only use non included objects for potential occlusion queries.
Don't calculate lines for them.
This fixes intersection lines appearing on objects not included by the
lineart modifier.
When doing a box selection in the dopesheet in the header area, the data block type was changed to annotation because the pointer was not usable and produced an unexpected result.
Thanks to @pullup for finding a way to reproduce the bug.
This introduces two functions to the blenloader module, here shown as
calls for brevity:
* `temp_lib_ctx = BLO_library_temp_load_id(real_main, blend_file_path, idcode, idname, reports);`
* Now the data in `temp_lib_ctx->temp_id` can be used (but ought not to
be not assigned to non-temp datablocks).
* `BLO_library_temp_free(temp_lib_ctx);`
The first loads a datablock from a blend file, and returns it as part of
a `struct TempLibraryContext`. This struct contains the temp-loaded ID,
as well as enough information to correctly free everything again.
Differential Revision: https://developer.blender.org/D10736
Transforms in certain cases
This was caused by wrong flag checking in {rB278011e44d43}, which just
seems to be a copy-paste error.
For example, enabeling 'Auto-Offset' in the View menu would lead to CM
being ignored.
Maniphest Tasks: T86219
Differential Revision: https://developer.blender.org/D10751
Following concerns raised in the commit that changed the name initially,
rB2e19509e60b39837, it makes more sense to keep the "Surface" name for
this node because it has a specific meaning that should not be confused
with other types of subdivision.
Changes include:
- Use `IFACE_` for UI labels set in the modifier panels
- Use a sub-sub-panel for transparency
- Fix grammar and spelling mistakes
- Use more natural user-friendly wording
- Make descriptions more specific and more useful
- Don't capitalize "line art" in descriptions (tooltips)
These changes are aimed at making the UI strings more consistent with
the rest of the UI and being more helpful to someone trying to understand
how to use the modifier.
Differential Revision: https://developer.blender.org/D10750
`NodeTreeRef` is a thin wrapper on top of `bNodeTree`. By default it
should not hide anything from the underlying `bNodeTree` (before this
it was hiding muted links).
For convenience some "derived" data is cached on sockets. For example
all the connected sockets when reroutes and muted links are ignored.
A nice side benefit of this refactor is that `NodeTreeRef` requires
less memory than before.
This makes more visible where ends each keyframe. To use, as we did before, full block sometimes looks hard to view where a keyframe ends.
Reviewed By: pepeland, mendio, Severin
Differential Revision: https://developer.blender.org/D10588
This patch adds the ability to mute individual wires in the node editor.
This is invoked like the cut links operator but with a new shortcut.
Mute = Ctrl + Alt
Cut = Ctrl
Dragging over wires will toggle the mute state for that wire.
The muted wires are drawn in red with a bar across the center.
Red is used in the nodes context to indicate invalid links, muted links and internal links.
When a wire is muted it exposes the original node buttons which are normally hidden when a wire is connected.
Downstream and upstream links connected using reroute nodes are also muted.
Outside scope of patch:
- Add support for pynodes e.g. Animation Nodes
- Requires minor change to check for muted links using the `is_muted` link property or the `is_linked` socket property.
Maniphest Tasks: T52659
Differential Revision: https://developer.blender.org/D2807
The "Operator Cheat Sheet" operator collects info about all operators, and as
part of that executes the callbacks to create dynamic enums. The callback to
enumerate the Outliner ID operations depends on Outliner context. If this isn't
available, it can just return a context-less version of the enum, that is, a
static enum with all available items. This was already done in case no context
is available at all.
This change shows the object or material name with the cursor when picking for a cryptomatte node.
Reviewed By: Julian Eisel
Differential Revision: https://developer.blender.org/D10705
Recursive restrict selection (hide/selectable flag) & renaming
edit-bones both used the active object, even when bones for another
non-active object were being operated on.
Bone renaming would rename a bone in the active object
(if that name exists).
This commit includes nodes to build the following primitives:
- Cone
- Cylinder
- Circle
- Cube
- UV Sphere
- Ico Sphere
- Line
- Plane/Grid
In general the inputs are the same as the corresponding operators
in the 3D view.
**Line Primitive**
The line primitive has two modes-- adding vertices between two end
points, or adding vertices each at an offset from the start point.
For the former mode, there is a choice between a vertex count
and a distance between each point.
**Plane Primitive**
This commit includes the "Plane" and "Grid" primitives as one node.
Generally primitives are named after the simpler form of the shape they
create (i.e. "Cone" can make some more complex shapes). Also, generally
you want to tweak the number of subdivisions anyway, so defaulting to
plane is not an inconvenience. And generally having fewer redundant
base primitives is better.
**Future Improvements**
A following patch proposes to improve the speed of the cylinder, cone,
and sphere primitives: D10730. Additional possible future improvements
would be adding subdivisions to the cube node and rings to the cone
and cylinder nodes.
Differential Revision: https://developer.blender.org/D10715
This adds the LineArt grease pencil modifier.
It takes objects or collections as input and generates various grease
pencil lines from these objects with the help of the active scene
camera. For example it can generate contour lines, intersection lines
and crease lines to name a few.
This is really useful as artists can then use 3D meshes to automatically
generate grease pencil lines for characters, enviroments or other
visualization purposes.
These lines can then be baked and edited as regular grease pencil lines.
Reviewed By: Sebastian Parborg, Antonio Vazquez, Matias Mendiola
Differential Revision: http://developer.blender.org/D8758
Add implicit `int32 to Color4f` conversion. Matches `int32 to float3` conversion logic.
This may not be the most useful conversion but prevents an error in the Attribute Convert node.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10686
Build proxies automatically when added to sequencer timeline and when
switching preview size.
This behavior can be disabled in user preferences.
Reviewed By: sergey, fsiddi
Differential Revision: https://developer.blender.org/D10363
Use h264 codec for output. This codec produces smaller files, can be
multithreaded and decodes even faster than MJPEG.
Quality setting 0-100 corresponds to "Lowest Quality" to
"Perceptually Lossless" in Blender's h264 encoding presets.
All available cores are used for decoding.
Same goes for decoding but only for codecs that supports this
(h264, vp9 seems to support this option out of th box as well).
Other decoders can probably be optimized in similar way, but threaded
encoding provides significant boost already.
I have tested variety of codecs, and all were transcoded properly.
Reviewed By: sergey, fsiddi
Differential Revision: https://developer.blender.org/D10731
- Remove Full Render size from VSE preview size. Use just 100% instead.
- Add Use Proxies checkbox to control whether proxies are used globally
- Move preview size to top so it is most prominent
- Set default to 100% preview size and use proxies
Reviewed By: sergey, fsiddi
Differential Revision: https://developer.blender.org/D10362
Problem is, when a collection is excluded from the scene, none of its
objects are technically instantiated.
This should not happen when *creating* an override, but can be fairly
common during resync process.
For now, use a lesser precise check in resync case, only relying on
object usercount. This might lead to some objects being left without any
collection in some rare weird case, but this cannot really be avoided
currently.
Allow downloading of source packages of Blender's dependencies, so that
it's easier to provide a "full source archive" that contains the blender
source + all dependencies archives. A `make` command for this will be
introduced soon.
This changes the deps builder slightly to be more flexible with the
origin of our source packages.
To support this a new CMake variable has been added called `PACKAGE_DIR`
where all sources archives will be stored.
default: a directory called `packages` in the build folder.
alternative-default: if a directory called `packages` exists in the
blender source folder that will be used. This is to support the "full
source archive" use case.
The download phase have been moved from the build phase to the configure
phase. Configure will download all sources validate the hashes while
downloading.
All `[depname].cmake` files have been changed to take a local
`file://[path_to_local_tarball]` path rather than a remote URI.
A second requirement was that there needed to be an option to grab the
sources from the blender SVN mirror rather than upstream. For this an
option has been added PACKAGE_USE_UPSTREAM_SOURCES (default ON). The
exact location in SVN still needs to be worked out, I tested with my
local webserver and codewise it checks out. The path that is in there
currently will not work (given there is no mirror there yet).
To build this mirror our local package caches can be used.
Reviewed By: lazydodo
Differential Revision: https://developer.blender.org/D10598
Changes to increase subdivision by one along both axis (X and Y)
For example with x_segment = 3 and y_segment = 3.
There should be 16 vertices ((3 + 1) * (3 + 1)) for correct
number of subdivisions. Currently they are 3 * 3 = 9 vertices.
Ref D10699
Seems like one of the example files on the cryptomatte github is
malformed and blender crashes when loading that file. This change will
try to load as much as possible from the manifest so it can still be
used.
This has also been reported to cryptomatte project.
Use a for loop that always begins with the active object,
instead of moving the active object in the array,
which failed when it's data already being handled.
While the existing logic could have been fixed,
it's simpler to change the loop order.
In the current implementation, cryptomatte passes are connected to the node
and elements are picked by using the eyedropper tool on a special pick channel.
This design has two disadvantages - both connecting all passes individually
and always having to switch to the picker channel are tedious.
With the new design, the user selects the RenderLayer or Image from which the
Cryptomatte layers are directly loaded (the type of pass is determined by an
enum). This allows the node to automatically detect all relevant passes.
Then, when using the eyedropper tool, the operator looks up the selected
coordinates from the picked Image, Node backdrop or Clip and reads the picked
object directly from the Renderlayer/Image, therefore allowing to pick in any
context (e.g. by clicking on the Combined pass in the Image Viewer). The
sampled color is looked up in the metadata and the actual name is stored
in the cryptomatte node. This also allows to remove a hash by just removing
the name from the matte id.
Technically there is some loss of flexibility because the Cryptomatte pass
inputs can no longer be connected to other nodes, but since any compositing
done on them is likely to break the Cryptomatte system anyways, this isn't
really a concern in practise.
In the future, this would also allow to automatically translate values to names
by looking up the value in the associated metadata of the input, or to get a
better visualization of overlapping areas in the Pick output since we could
blend colors now that the output doesn't have to contain the exact value.
Idea + Original patch: Lucas Stockner
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D3959
Callbacks used in `bpy.props` didn't hold a references to the functions
they used.
While this has been the case since early 2.5x it didn't cause any
problems as long as the class held a reference.
With Python 3.10 or when using `from __future__ import annotations`,
the annotations are no longer owned by the class once evaluated.
Resolve this by holding a reference in the module, which now supports
traverse & clear callbacks so the objects are visible to Python's
garbage collector.
Also refactor storage of Python data, moving from an array into a struct.
This is an implementation that is about 1.5-2.1 times faster. It gives a result
that is on average 6° different from the old implementation. The difference is
because normals (Ng, N, N') are not selected to be coplanar, but instead
reflection R is lifted the least amount and the N' is computed as a bisector.
Differential Revision: https://developer.blender.org/D10084
Offset the starting point of segments by a random amount to avoid the bounding
box shape affecting the result and creating artifacts.
Differential Revision: https://developer.blender.org/D10576
Static initialization order was not guaranteed to be correct for node base
types. Now wrap all initialization in accessor functions to ensure the order
is correct.
Did not cause any known bug on Linux/macOS/Windows, but showed up on this
platform.
The issue was caused by a prediction algorithm detecting tracking the
wrong way. Solved by passing tracking direction explicitly, so that
prediction will always happen correctly regardless of the state of the
Tracks context.
This was cause by the change of some epsilon values for reflections.
This commit changes the planar reflection tracing to have correct
handling of parallel rays and discard any self intersection with normal
screen raytrace.
The issue is that the `last_node_hovered_while_dragging_a_link` pointer is invalidated on undo.
The pointer does not have to be on the space runtime data, because it only needs to exist
as long as the operator is running.
Differential Revision: https://developer.blender.org/D10726
This exposes the `crease` attribute, that is used by the Subdivide Smooth node.
It is also the first attribute on the edge domain. Domain interpolations for the
edge domain have not been implemented yet.
Ref T86397.
Differential Revision: https://developer.blender.org/D10660
Attempt to work around some full-corruption cases created at the studio.
Not clear how those were created, so not really fixing anything here,
just detecting and 'solving' as best as possible some high corruption of
local overrides.
This is good to have in general anyway, might help prevent further
corruption to happen too.
is hidden from the viewport
Check visibilty (as done in workbench_cache_populate) in
overlay_edit_uv_cache_populate as well.
Maniphest Tasks: T86542
Differential Revision: https://developer.blender.org/D10724
This is a refactor and no functional changes are expected.
The goal is to make it simpler to add other data sources without having
to repeat the drawing code everywhere. Also, having the `CellValue` class
allows us to implement filtering and sorting in a more generic way.
There are two caveats of the current implementation which still need
to be resolved in a separate step:
* In theory the data on the original object can be editable in the spreadsheet.
* If a complex object is in edit mode, and its original data is displayed,
the drawing code can be slow, because the bmesh is converted to a mesh
every time. The proper solution is to draw the data from the bmesh directly.
This should become easier after an upcoming refactor.
Ref T86141.
Differential Revision: https://developer.blender.org/D10701
This implements the status bar as footer region in the
spreadsheet editor.
It shows the total number of rows and columns as well
as how many rows are actually visible (based on the filter).
The implementation stores the stats in a runtime struct during
drawing and the status bar reads from that struct.
Ref T86142.
Differential Revision: https://developer.blender.org/D10693
The shader was filtering everything but the selected color.
The fix inverts the check to make sure that color is selected.
Reviewed By: fclem
Maniphest Tasks: T86370
Differential Revision: https://developer.blender.org/D10670
- Split out auto-save file writing from timer code.
- Add wm_autosave_timer_begin so there are both begin & end functions.
- Replace WM_event_add_timer/WM_event_remove_timer with begin/end calls.
Previously all blend files included the path they were saved,
causing files distributed publicly to include users local paths.
This also included developers home directories for startup & userprefs
defaults & app-templates bundled with Blender.
Now recovery information is only written for auto-save & quit.blend
since this is the only time they're intended to be used.
I had done some experiments to see what Fast boolean did for material
mapping and thought it just used the same slot in the target as the
slot in the source. The truth is more complicated: if the target material
exists in any slot of the destination, we need to remap to whatever
slot has the matching material. I fixed Exact Boolean to do this.
Since the materials may be in the object, this means that BKE_mesh_boolean
had to get another argument, the remapping arrays.
I will note that the current behavior of Fast, and now Exact, is not ideal.
Ideally, if the source material does not exist in the target, a new material
slot should be created in the target and the source material copied there
(and incrementing the material's reference count). Maybe a future project,
but for now, I want the behavior of Exact to match that of Fast.
Accumulate error caused by the low amount of integration slices and
correct it for the low roughness surfaces.
This increases light leak but it is less distracting than dark fringe
everywhere.
This checks the generated key-map data matches the result of
re-exporting and re-importing.
This shows up various inconsistencies, including:
- Unused keymaps.
- Unknown/unused data in the keymap.
- Event arguments that don't make sense.
- Event values that don't match the event type
(tweak direction on keyboard event for example).
A block of code ran when `wm_keymap_update_flag` was non-zero,
replace this with explicit flag check since it wasn't
immediately obvious which flag needed to be set.
While this still isn't done by default on startup,
activating a key-config will load it as expected.
Needed to perform key-map loading tests in background mode.
This is necessary to make float sockets display a value with the unit
system. `PROP_DISTANCE` will be used quite a lot by the mesh primitives
geometry nodes patch.
Differential Revision: https://developer.blender.org/D10711
The shader was not using the horizon texture and was trying to
trace the AO again.
Also the depth reconstruction was off because now using the maxzBuffer.
Currently (in geometry nodes) you can delete the group input or group
output nodes with no way to get them back without copy and paste. This
adds them to the "Group" submenu of the add menu so at least there is
a way to add them back.
Additionally, these nodes are moved to the "Group" submenu for all node
editors. This makes sense since they are not like the other input or
output nodes, they really just relate to how groups are organized.
Differential Revision: https://developer.blender.org/D10241
This happens when the normal is too much deformed to give valid
reflection even after ensure_valid_reflection.
Cycles seems to not handle this case either so we just discard the
rays.
Simple divide by 0 error. The input radius was assumed to be safe
but is not when the user can scale it arbitrarly.
This also move the division out of the loop.
We now reuse 9 hitpoints from the neighboorhood using a blue noise
sample distribution as mentionned in the reference presentation.
Reusing more rays does however make some area a bit more blury.
The resulting noise is quite lower compared to previous implementation
which was only reusing 4 hits.
This make sure the rays are generated randomly from a fullres
texel center.
This creates more noise but increase the convergence when doing
half res tracing.
This split is to make code easier to manage and rename the files to
`effect_reflection_*` to avoid confusion.
Also this cleans up a bit of the branching mess in the trace shader.
This commit adds a `normal` attribute on the polygon domain. Since
normal data is derived data purely based off of the location of each
face's vertices, it is exposed as a read-only attribute. After
rB80f7f1070f17, this attribute can be interpolated to the other domains.
Since this attribute is a special case compared to the others, the
implementation subclasses `BuiltinAttributeProvider`. It's possible
there is a better way to abstract this. Something else might also
become apparent if we add similar read-only attributes.
See rB2966871a7a891bf36 for why this is preferred over the previous
implementation.
Differential Revision: https://developer.blender.org/D10677
After further thought, the implementation of the "normal" attribute
from D10541 is not the best approach to expose this data, mainly
because it blindly copied existing design rather than using the
best method in the context of the generalized attribute system.
In Blender, vertex normals are simply a cache of the average normals
from the surrounding / connected faces. Because we have automatic
interpolation between domains already, we don't need a special
`vertex_normal` attribute for this case, we can just let the
generalized interpolation do the hard work where necessary,
simplifying the set of built-in attributes to only include the
`normal` attribute from faces.
The fact that vertex normals are just a cache also raised another
issue, because the cache could be dirty, so mutex locks were
necessary to calculate normals. That isn't necessarily a problem,
but it's nice to avoid where possible.
Another downside of the current attribute naming is that after the
point distribute node there would be two normal attributes.
This commit reverts the `vertex_normal` attribute so that
it can be replaced by the implementation in D10677.
Differential Revision: https://developer.blender.org/D10676
The Attribute Convert node provides functionality to change attributes
between different domains and data types. Before it was impossible to
write to a UV Map attribute with the attribute math nodes since they
did not output a 2D vector type. This makes it possible to
"convert into" a UV map attribute.
The data type conversion uses the implicit conversions provided by
`\nodes\intern\node_tree_multi_function.cc`.
The `Auto` domain mode chooses the domain based on the following rules:
1. If the result attribute already exists, use that domain.
2. If the result attribute doesn't exist, use the source attribute domain.
3. Otherwise use the default domain (points).
See {T85700}
Differential Revision: https://developer.blender.org/D10624
The result value should be true if the input values are not zero.
Note that there is ongoing conversation about these conversions
in D10685. This is simply a fix though.
This operator initializes mask values for the entire mesh. It supports
different modes for initializing those values, and more will be added in
the future.
The initial version supports generating a random mask per vertex, Face
Sets or loose parts. These masks are useful for introducing variations
in the model using the filters (both shapes and colors).
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10679
Before only it was only possible interpolate frames of `Keyframe` type. Now all types except `Breakdown` can be used.
`Breakdown` cannot be used because it would be impossible interpolate two times because the extremes of the interpolation would change and the clean operator would not work.
There is no reason to hide the 'Scale' and 'Scale Randomness' options
for fluid particles that are rendered as 'Object'.
It is possible that hiding these options was just an oversight and
not intentional.
Add new function `blo_bhead_is_id_valid_type()` to correctly check the
blend file block type.
File block type codes have four bytes, and two of those are only in use
when these blocks contain ID datablocks (like `"OB\0\0"`). However,
there are other types defined in `BLO_blend_defs.h` that have four
bytes, like `TEST`, `ENDB`, etc.
The function `BKE_idtype_idcode_is_valid(short idcode)` was used to
check for ID datablocks while reading a blend file. This only takes a
2-byte parameter, and thus its result is invalid for the 4-byte codes.
For `TEST` blocks, it would actually consider it a `TE` block, which is
a valid identifier for a Texture. This caused the heap buffer overflow,
as the datablock is not a valid ID, and thus the bytes that were
expected to form an ID name actually encode something completely
different.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D10703
Sculpt undo relied on having a mode-changing undo step to properly
apply changes.
However this isn't the case with startup files or when mixing
global undo steps with sculpt (see T82851, also fixed).
Undo stepping logic follows image_undosys_step_decode_undo.
This is basically done by ignoring override operations from old override
affecting ID pointer properties, when the new (destination) one is not
NULL.
Fix T86501: New object added to overridden collection doesn't show up in linking file on Resync.
This is more of a work-around actually, since there is no real way to
fix the issue in a fully automated and consistent way, it is caused by
older blender files being saved with 'broken' overrides.
WARNING: This cannot ensure that some purposedly edited/overridden ID
pointer properties won't be lost in the process.
Code would end up freeing some of the newly created overrides, which
were assigned to the matching linked ID's `newid` pointer, accessed
again further down the code.
Note that this is not a normal expected situation, and it won't give a
proper resync result anyway, but it might happen in some complicated
corner cases, and also quite often when dealing with older .blend files.
In some cases (advanced, low-level), we also want to remap pointers like
`ID.newid` or `ID.orig_id`.
Only known case currently is `id_delete`, to avoid leaving potential access to freed memory. See next commit and T86501.
Baking to Vertex Colors would always bake to sculpt vertex colors (if
such a layer is present) even if those are not enabled in the
experimental preferences. This would bake without an error but leave the
user without a result to look in the viewport.
Now check if sculpt vertex colors are enabled and only bake to them in
that case.
Maniphest Tasks: T86455
Differential Revision: https://developer.blender.org/D10692
- Add notes on portability.
- Use encoding argument for all file IO.
- Use integer math to calculate major/minor version, while float
division should be fine prefer matching Blender.
This type, CacheLookupResult, holds the data for the current time, or an
explanation as to why no data is available (already loaded, or simply
nothing available). This is useful to document the behavior of the code
but also, in future changes, to respond appropriately for missing data.
Inside of the procedural, instances are AlembicObjects which point to
the AlembicObject that they instance.
In Alembic, an instance is an untyped Object pointing to the original
(instanced) one through its source path. During the archive traversal we
detect such instances and, only if the instanced object is asked to be
rendered, set the instance's AlembicObject to point to the original's
AlembicObject.
Cycles Object Nodes are created for each AlembicObject, but only for
non-instances are Geometries created, which are then shared between
Object Nodes. It is supposed, and expected, that all instances share the
same shaders, which will be set to be the ones found on the original
object.
As for caching, the data cache for an AlembicObject is only valid for
non-instances and should not be read to or from as it is implicitly
shared.
This will help support instancing as cache building is now decoupled
from the logic to update the Nodes' sockets as data (and cache) will
need to be shared by different Geometries somehow, and also simplify
implementing different data caching methods by centralizing this
operation.
We need to explicitely tag the Attribute and AttributeSet as modified if
we change or add/remove data. This is more of a bandaid until attributes
handling is refactored to be able to reuse routines from the Attribute
API.
This patch adds a node, that removes an attribute if possible,
otherwise it adds an error message.
Differential Revision: https://developer.blender.org/D10697
This patch fixes a visual bug related to connecting an output socket to
a Multi-Input Socket, that already has a link to that same output.
In this case, the drag link got a new index and snapped to a new
position. This path makes the drag link snap to the same position as the
first link between the two sockets.
Differential Revision: https://developer.blender.org/D10689
Caused by 46aa70cb48.
RNA would send property update notifiers with the owner ID as `reference` data.
Since above's commit we'd only send the notifiers to editors if the reference
data address matches the space's address. So editors wouldn't get the notifiers
at all.
The owner ID for space properties is always the screen AFAIK. So allow
notifiers with the screen as reference to be passed to editors as well, think
this is reasonable to do either way.
For example, steps to reproduce were:
* Open Asset Browser
* Mark some data-blocks of different types as assets (e.g. object & its
material)
* Switch between the categories in the Asset Browser. The asset list wouldn't
be updated.
When adding a notifier, `reference` data can be passed. The notifier system
uses this to filter out listeners, for example if data of a scene changes,
windows showing a different scene won't get the notifiers sent to their
listeners.
For the `NC_SPACE` notifiers, a number of places also passed the space as
`reference`, but that wasn't used at all. The notifier would still be sent to
all listeners in all windows (and the listeners didn't use it either). Causing
some unnecessary updates (e.g. see ed2c4825d3).
With this commit, passing a space will make sure the notifier is only sent to
that exact space. Some code seems to already have expected that to be the case.
However there were some cases that passed the space as `reference` without
reason, which would break with this commit (meaning they wouldn't redraw or
update correctly).
Corrected these so they don't pass the space anymore.
Steps to reproduce were:
* Open an Asset Browser
* "Mark Asset" on some data-block
* Change the Asset Browser into a different editor (not File Browser!)
* "Clear Asset" on the data-block again, or mark another asset
* Change back to the Asset Browser, it will show an outdated list
Now the file-browser reloads local file data after spaces were changed. Note
that the current notifier code doesn't limit the space-change notifiers to the
affected spaces, so changing any visible space will trigger this. That's an
issue to be fixed separately.
The check for undo-depth increment/decrement assumed a newly loaded
window manager would have a different pointer.
This broke bl_animation_fcurves test indirectly,
the change to undo-depth caused the redo panel to attempt to popup
in background mode - which isn't supported.
Now the pointer is unchanged, the undo-depth is assumed to match
the value used when calling the operator.
The undo-depth is now properly maintained between file loads,
which is an improvement on the original behavior which reset it.
Keep the pointer location from the initial window-manager
between file load operations.
This is needed as the Python API may hold references to keymaps for e.g.
which are transferred to the newly loaded window manager,
without their `PointerRNA.owner_id` fields being updated.
Since there is only ever one window manager, keep the memory at the same location so the Python ID pointers stay valid.
Reviewed By: mont29
Ref D10690
Previously many operations would run on file load, even if the file
did not load. Pre/post load handlers were called, timers canceled,
all undo data freed, editors exited ... etc.
Now keep the blend file in it's current state.
This simplifies updating this area of code as there is one less
possible situation to account for.
Currently file loading performs almost all reloading logic
even in the case loading the file fails, causing the file to be in
a state that isn't well defined: undo is cleared, timers are canceled &
scripts are re-registered.
- Don't set G.relbase_valid until the file is loaded.
- Remove unnecessary string pointer comparison.
- Remove unused filename being passed to 'setup_app_data'.
`BKE_lib_override_library_main_resync` uses
`LIB_TAG_LIB_OVERRIDE_NEED_RESYNC` tags set by RNA override apply code,
and perform detection for the remaining cases (those were new overrides
need to be created for data that was not present before in the library).
And then it actually resync all needed local overrides.
Part of T83811 & D10649.
We can fairly easily detect some resync-needed cases when applying the
overrides operations on a Pointer RNA property.
This should cover all cases where an existing override's ID pointer is
changed in its linked data.
We still have to add code to detect when a not-yet-overridden linked ID
needs to become overridden (because its relations to other data-blocks
changed in a way that requires it).
Part of T83811 & D10649.
This patch changes the `MEM_DEVICE_ONLY` type to only allocate on the device and fail if
that is not possible anymore because out-of-memory (since OptiX acceleration structures may
not be allocated in host memory). It also fixes high peak memory usage during OptiX
acceleration structure building.
Reviewed By: brecht
Maniphest Tasks: T85985
Differential Revision: https://developer.blender.org/D10535
Rather than letting the `TreeElementAnimData` constructor take an ID from which
we get the animation-data based on an assumption on how it's stored, let the
constructor take the animation-data directly. That way we further centralize
the assumptions on the data passed to the element creation to
`tree_element_create()`.
The following commit will add a comment explaining the plan to entirely get rid
of those assumptions in the future.
There was an implicit assumption that tree element types using the new code
design set their name on creation. Use an assert to make this explicit. See
f59ff9e03a, which was an error because of this broken assumption.
Caused by 2e221de4ce in combination with 4292bb060d.
In the former I forgot to set the name for NLA actions in the new code design,
in the latter I made it an assumtion that tree element types using the new
design set the name.
The following commit will make this assumption explicit with an assert.
When loading a file with an asset browser open, and it showed a custom asset
library that can't be found currently (e.g. because the file is from somebody
else), the `BLI_assert(0)` in `rna_FileAssetSelectParams_asset_library_get()`
would fail.
There was code to handle this case already, but unlike I thought it didn't run
right after file read. Now it does.
The multi-input-socket cannot be connected to the same socket twice currently.
However, it is still possible to achieve this using an intermediate reroute node.
In this case the origin socket should be listed twice in the `linked_sockets_` list.
Higher level functions can still deduplicate the list of they want.
This commit adds an operator to the RMB-menu "Copy Full Data Path“,
to copy the full RNA path to the clipboard. It aims to complement
"Copy Data Path“, which only copies the part of the path that is needed
for drivers, but for writing addons, etc. it is useful to have an option that
gives the full data path.
Similar patch have been submitted before, see D763 and D2746
This time I did not split the operator (as D2746) and does not contain the UI reorganization (as D763)
Note, the fixes from D2746 were committed in rB09eac0159db8 so that patch can be closed.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D10539
This makes the hit delta threshold dependant on the ray angle.
If the ray is more aligned with the view, its intersection
threshold gets bigger to avoid going through geometry.
This improves reflections and fix T86448 refraction issue.
We now have a new buffer to output reflection depth. This buffer is
only usefull for non planar SSR but we use it to tag the planar rays.
This also touch the raytrace algo for planars to avoid degenerate
lines on vert sharp reflections.
This changes the sampling routine to use the method described in
"A Simpler and Exact Sampling Routine for the GGXDistribution of Visible Normals"
by Eric Heitz.
http://jcgt.org/published/0007/04/01/slides.pdf
This avoids generating bad rays and thus improve noise level in screen-
space reflections / refraction.
This changes the hitBuffer to store `ReflectionDir * HitTime, invPdf`
just as the reference presentation.
This avoids issues when the hit refinement produce a coordinate that
does not land on the correct surface.
We now store the pdf in the same texture and store it inversed so we can
remove some ALU from the resolve shader.
This also rewrite the resolve shader to not be vectorized to improve
readability and scalability.
Since rBb279fef85d1a, the nodes properties for geometry nodes using a
texture are displayed in the Properties Editor.
It was possible to create recursive nodetrees when choosing the 'root'
nodegroup in the node link menu though leading to a crash.
Now poll if a group node of a particular node could actually be added to
the current tree.
Also check if the tree types actually match.
Maniphest Tasks: T86416
Differential Revision: https://developer.blender.org/D10671
This way we get a choice when we click on node links in the Properties
Editor.
This also changes some of the more permissive poll functions on some
nodes back to being "shading-only" (these were made permissive in
rBb78f2675d7e5 for simulation nodes, but have not found their way into
geometry nodes yet).
ref b279fef85d / T86416 / D10671
Maniphest Tasks: T86416
Differential Revision: https://developer.blender.org/D10673
The Blender/Cycles XYZ color space has a D65 white point instead of E, and
this was not correctly accounted for both in the OpenColor config reading code
and the bundled config.
This meant that since the OpenColorIO v2 upgrade, the Linear ACES color space
was not working correctly, and other OpenColorIO configs defining
aces_interchange were not interpreted correctly.
This conversion works the same way as a combination of the existing
color to float3 to boolean conversions, so the boolean result will be
false if the color is black, otherwise true, and the alpha is ignored.
This Patch removes the auto sorting from Multi-Input Sockets and allows
the links to be sorted by drag and drop instead.
As a minor related change, it fixes the drawing of the mute line to
connect to the first input instead of the socket's center.
This implements the MVP for the new spreadsheet editor (T85879). The functionality
is still very limited, but it proved to be useful already. A more complete picture
of where we want to go with the new editor can be found in T86279.
Supported features:
* Show point attributes of evaluated meshes (no original data, no other domains,
no other geometry types, yet). Since only meshes are supported right now, the
output of the Point Distribute is not shown, because it is a point cloud.
* Only show data for selected vertices when the mesh is in edit mode.
Different parts of Blender keep track of selection state and original-indices with
varying degrees of success. Therefore, when the selected-only filter is used, the
result might be a bit confusing when using some modifiers or nodes. This will
be improved in the future.
* All data is readonly. Since only evaluated data is displayed currently, it has to
be readonly. However, this is not an inherent limitation of the spreadsheet editor.
In the future editable data will be displayed as well.
Some boilerplate code for the new editor has been committed before in
rB9cb5f0a2282a7a84f7f8636b43a32bdc04b51cd5.
It would be good to let the spreadsheet editor mature for a couple of weeks as part
of the geometry nodes project. Then other modules are invited to show their own data
in the new editor!
Differential Revision: https://developer.blender.org/D10566
Note, this does not allow users to connect the same socket more than once to
a multi-input-socket in the UI. However, the situation could still happen when
using node muting.
Properties Editor
Since rBb279fef85d1a, the nodes properties for geometry nodes using a
texture are displayed in the Properties Editor.
rB85421c4fab02 added an attribute search button, but this was missing
still (gave just the regular text button) if this was displayed in the
Properties Editor.
ref b279fef85d / T86416 / D10671 / D10673
Maniphest Tasks: T86416
Differential Revision: https://developer.blender.org/D10674
Using EEVEE (as well as some other actions like saving the file or
tweaking mesh parameters) can cause a PBVH rebuild. The different sculpt
tools can store PBVH nodes or other related data in their caches, so
this data becomes invalid if the PBVH rebuilds during evaluation. This
ensures that the PBVH does not rebuild while the cache of Expand is
being used, like it already happens for brushes and filters.
Reviewed By: JacquesLucke
Maniphest Tasks: T86422
Differential Revision: https://developer.blender.org/D10675
Adds toggle to graph editor (View->Show Extrapolation). When disabled,
then fcurves only draw over the keyframe range. For baked fcurves and
ghost fcurves, the range is all sampled points.
It is intended for frequent use so anybody could assign hotkey or add
to quick favorites that's why GE-View is the best place for it.
Show Extrapolation is the default.
Reviewed By: sybren, Stan1, looch
Differential Revision: http://developer.blender.org/D10442
No functional changes.
This function replaces some of the logic in
`DRW_select_buffer_find_nearest_to_point` that traverses a buffer in a
spiral way to search for a closer pixel (not the closest).
Differential Revision: https://developer.blender.org/D10548
This commit adds interpolation to and from attribute on the polygon
domain. Interpolation is done automatically when a node uses attributes
on two different domains. The following are the new interpolations and
corresponding simple test cases:
- **Point to Polygon**: Painting the shade smooth attribute in weight
paint mode
- **Polygon to Point**: Moving points along a normal based on the
material index
- **Polygon to Corner**: Scaling a UV map with the material index
before sampling a texture
{F9881516}
This is also necessary for an improved implementation of the `normal`
attribute.
Differential Revision: https://developer.blender.org/D10393
This adds an extra option to the Face Sets Init operator to initialize
individual Face Sets based on the current Face Sets boundaries.
In particular, this is useful for splitting the patterns created by
Expand into individual Face Sets for further editing.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10608
Document the fact that `bpy.types.KeyMaps.new()` will not create a new
keymap but instead return an existing one, if one with the given
name/space/region already exists.
No functional changes.
This patch exposes the "Shade Smooth" value as a boolean attribute.
This setting is exposed as a check-box in the mesh data properties,
but the value is actually stored for every face, allowing some faces
to be shaded smooth with a simple per-face control.
One bonus, this allows at least a workaround to the lack of control
of whether meshes created by nodes are shaded smooth or not: just use
an attribute fill node.
Differential Revision: https://developer.blender.org/D10538
Auto frees cryptomatte session when it the pointer is collected from the
stack.
Reviewed By: Jacques Lucke
Differential Revision: https://developer.blender.org/D10667
Use member initializer list for constructor.
Use `this->` for member function.
Introduced in rBef53859d24a9720882e3ca6c5415faefec6fb82c
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D10653
Prior to rB99a7c917eab7, Shift + D was used to set detail size for both
constant and relative detail (using radial control). The commit added an
improved operator for doing this for constant detail (showing the
triangle grid representation), but left the user without a shortcut to
do this for relative detail.
Interestingly rB99a7c917eab7 only changed this for the Blender keymap,
the Industy Compatible keymap still has the "old" entry.
This patch changes both keymaps to have both entries.
For user experience, the real change here is to have both available on
one 'primary' shortcut (Shift+D), the improved
'dyntopo_detail_size_edit' operator will now act on all possible cases.
If it deals with constant detail, it acts as before, if it deals with
relative detail etc, it will fallback to the "old" way of doing it via
radial control instead. I assume this adresses what was stated in
rB99a7c917eab7: "Deciding if both detail sizes can be unified needs a
separate discussion"
Also, move dyntopo_detail_size_edit to sculpt_detail.c
Fixes T83828
Maniphest Tasks: T83828
Differential Revision: https://developer.blender.org/D9871
A few changes to make this consistent with other modifier panels:
- Title case for UI labels
- Use property split (and therefore decorators)
- Declare sublayout variables after getting modifier info
This was meant to be part of rB9ce950daabbf, but the change dropped from
the set at some point in the process of updating and committing.
Sorry for the noise.
In {rBb279fef85d1a} the button that displays a texture in a Properties
Editor texture tab was added for geometry nodes.
Same commit will actually show them for Brush textures as well (but
disabled -- because the Texture users dont match).
This task is for finanlizing proper support for Brush textures as well.
There was originally a separate patch for this (see {D9813}) but most of
it was already implemented by above commit.
**what this solves**
from the default startup file:
- go to any sculpt or paint mode and add a texture to your brush
- observe the button to edit this texture in the Properties editor is
greyed out
{F9860470}
There are two possible solutions:
- [1] call the texture template for the brush `texture_slot` texture
(instead of the brush 'texture') from the python UI code, this is then
working in harmony how ButsTextureUser works for brushes
- [2] tweak the way `ButsTextureUser` works (dont rely on
`RNA_BrushTextureSlot` there)
This patch implements the first solution.
Since `brush.texture_slot` is `br->mtex` RNA wrapped and `brush.texture`
is `br->mtex.tex` RNA wrapped, this really comes down to doing the same
thing. I checked that creating a new texture and unlinking/deleting will
have the same results even though they take slightly different code
paths: assignment and NULLing the pointers are working on the same (see
above) and RNA update callbacks also do the same [even though in
different functions]:
- brush.texture will do rna_Brush_main_tex_update
- brush.texture_slot.texture will do rna_TextureSlotTexture_update /
rna_TextureSlot_update
(only difference here is an additional DEG relations update in the case
of texture_slot which should not do harm)
Differential Revision: https://developer.blender.org/D10626
This makes the following changes to the name of the two
geometry nodes subvision nodes:
- `Subdivision Surface` -> `Subdivide Smooth`
- `Subdivision Surface Simple` -> `Subdivide`
Most of the benefit is that the names are shorter, but it also better
mirrors the naming of operations in edit mode, and phrases the names
more like actions. This was discussed with the geometry nodes team.
When you have many distinct objects, in an Eevee render then the shadow caster gets exponentially slower as the number of (distinct) objects increase.
This is because of the way that frontbuffer->bbox (EEVEE_BoundBox array) and the associated frontbuffer->update bitmap are resized.
Currently the resizing is done by reserving space for SH_CASTER_ALLOC_CHUNK (32) objects at a time.
When the number of objects is large, then the MEM_reallocN() gets progressively slower because it must memcpy the entire bbox/bitmap data to the new memory chunk.
And there will be a lot of *memcpy* operations for a large scene.
(Obviously there are a significant number of memory allocations/deallocations too - though this would be linear performance.)
I've switched to doubling the frontbuffer->alloc_count (buffer capacity) instead of adding SH_CASTER_ALLOC_CHUNK (32). As I understand this is the only way to eliminate exponential slowdown. Just increasing the size of SH_CASTER_ALLOC_CHUNK would still result in exponential slowdown eventually.
In other changes, the "+ 1" in this expression is not necessary.
if (id + 1 >= frontbuffer->alloc_count)
The buffer is 0-based. So when the buffer is initially allocated then id values from bbox[0] to bbox[31] are valid. Hence when frontbuffer->count == frontbuffer->alloc_count, is when the resizing should be triggered.
As it stands the "+ 1" results in resizing the buffer, when there is still capacity for one more object in the buffer.
I've changed the initial buffer allocation to use MEM_mallocN() instead of MEM_callocN(). The difference is that malloc() doesn't memset buffer (with zeros) when allocated. I've checked the code where new bbox records are created, and it does not rely on the buffer being initialised with zeros.
Anyway, isn't calloc() safer than using malloc()? Well no, it's actually the opposite in this case. Every time the buffer size is increased, it is done using realloc(), and this does not zero-out the uniniitialised portion of the buffer. So the code would break if it was modified to assume that the buffer contains zeros. Hence I believe initialising the buffer using calloc() could be misleading to a new developer.
Won't this result in increased memory usage? Yes, if you have millions of objects in your scene, then you are potentially using up-to twice the memory for the shadow caster. (However if you have millions of objects in your scene you're probably finding the Eevee render times a slow.)
Note that once the render gets going the frontbuffer bbox/bitmap will be shrunk to a multiple of SH_CASTER_ALLOC_CHUNK (32), therefore releasing the overallocation of memory.
As observed in Visual Studio - this appears to be prior to peak memory usage anyway.
Note this shrinking is executed in EEVEE_shadows_update() - during the first render sample pass. If necessary you could consider shrinking the buffer immediately after the EEVEE_shadows_caster_register() has done it's work. (Note however it appears you would need to add that function call is multiple places.)
Anyway as per the bug report I raised, I observed a 5% increase in peak-memory. And I'm unclear whether this difference in memory is due to me running the debug build. (It could be that there is no difference because of the shrinking.)
I couldn't figure out how the shadow caster backbuffer works. I see that EEVEE_shadows_init() has an explicit command to swap the front/back buffers. However this is done only when the buffers are first initialised and there is nothing in there yet. In my testing, the backbuffer->count was always zero, EEVEE_shadows_update() never did anything with the backbuffer.
Finally this problem is most evident when using Geometry Nodes or a Particle System to instantiate many objects. Objects created through say the array modifier do not cause any issues because it is considered one object by the shadow caster.
Reviewed By: #eevee_viewport, fclem
Differential Revision: https://developer.blender.org/D10631
This commit refactors the point distribute node to skip realizing
the instances created by the point instance node or the collection
and object info nodes. Realizing instances is not necessary here
because it copies all the mesh data and and interpolates all
attributes from the instances when this operation does not
need to modify the input geometry at all.
In the tree leaves test file this patch improves the performance of
the node by about 14%. That's not very much, the gain is likely larger
for more complicated input instances with more attributes (especially
attributes on different domains, where interpolation would be necessary
to join all of the instances). Another possible performance improvement
would be to parallelize the code in this node where possible.
The point distribution code unfortunately gets quite a bit more
complicated because it has to handle the complexity of having many
inputs instead of just one.
Note that this commit changes the randomness of the distribution
in some cases, as if the seed input had changed.
Differential Revision: https://developer.blender.org/D10596
Splits up `tree_element_id.cc`/`tree_element_id.hh`.
If we move all ID types into this one file, it will become rather big. Smaller
files are probably easier to work with. We could still keep small classes like
`TreeElementIDLibrary` in the general file, don't mind really, but this creates
separate files for that too.
These files can contain more than just the "base" tree element types. E.g. the
class for the view-layer base element can also contain the class for the
view-layer elements. Otherwise we'd end up with like >50 files for the
individual types, most of them very small.
So just give the files a general name and put the related classes in there.
Continuation of work in 2e221de4ce, 249e4df110 and 3a907e7425.
Adds new tree-element classes for the scene-ID, scene collections, scene
objects, and the view layers base.
There is some more temporary stuff in here, which can be removed once we're
further along with the porting. Noted that in comments.
This is a Python version of the existing `make_source_archive.sh`
script. IMO it's easier to read, and it'll also be easier to extend with
the necessary functionality for D10598.
The number of lines of code is larger than `make_source_archive.sh`, but
it has considerably less invocations of `awk` ;-) And also the filtering
is integrated, instead of forking out to Python to prevent certain files
to be included in the tarball.
Reviewed By: dfelinto, campbellbarton
Differential Revision: https://developer.blender.org/D10629
Currently the implementations specific to each geometry type are in
the same file. This makes it difficult to tell which code is generic
for all component types and which is specific to a certain type.
The two files, `attribute_access.cc`, and `geometry_set.cc` are
also getting quite long.
This commit splits up the implementation for every geometry component,
and adds an internal header file for the common parts of the attribute
access code. This was discussed with Jacques Lucke.
The actual sample count is rounded up to a multiple of 4 because we
sample 4 horizons directions.
Changing this setting forces the shader to recompile (because using a
GPU_constant).
This just bypass the occlusion computation if there is no occlusion
data. This avoids weird looking occlusion due to the screen space
geometric normal reconstruction.
The sampling is now optimum with every samples being at least one pixel
appart. Also use a squared repartition to improve the sampling near the
center.
This also removes the thickness heuristic since it seems to remove
a lot of details and bias the AO too much.
This is a major rewrite that improves the screen space raytracing
a little bit.
This also decouple ray preparation from raytracing to be reuse in other
part of the code.
This changes a few things:
- Reflections have lower grazing angle failure
- Reflections have less self intersection issues
- Contact shadows are now fully opaque (faster)
Unrelated but some self intersection / incorrect bad rays are caused by
the ray reconstruction technique used by the SSR. This is not fixed by
this commit but I added a TODO.
This removes the need for per mipmap scalling factor and trilinear interpolation
issues. We pad the texture so that all mipmaps have pixels in the next mip.
This simplifies the downsampling shader too.
This also change the SSR radiance buffer as well in the same fashion.
This was reported as opening alembic caches ignoring the
'use_relative_paths' preference, but this operator just did not have
this setting. Fortunately, adding this is just a simple switch.
Maniphest Tasks: T86063
Differential Revision: https://developer.blender.org/D10568
This adds the initial boilerplate code that is required to introduce
the new spreadsheet editor. The editor is still hidden from the ui.
It can be made visible by undoing the change in `rna_screen.c`.
This patch does not contain any business logic for the spreadsheet editor.
Differential Revision: https://developer.blender.org/D10645
Ref T86279.
Add operator `FILE_OT_view_selected` to the file browser (and thus also
to the asset browser) that scrolls selected files into view.
This includes the active file, even though it is not selected. In
certain cases the active file can loose its selected state (clicking
next to it, or refreshing the asset browser), but then it's still shown
in the right-hand sidebar. Because of this, I found it important to take
it into account when scrolling.
This also includes a change to the keymaps:
- Blender default: {key NUMPAD_PERIOD} is removed from the "reload"
operator, and assigned to the new "view selected files" operator. The
reload operator was already doubly bound, and now {key R} is the only
remaining hotkey for it.
- Industry compatible: {key F} is assigned to the new "view selected
files" operator. This is consistent with the other "view selected"
operators in other editors.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D10583
The Tool stores desired dimensions as `scale` and thus had to half the
scale again in `make_prim_init()` because by default all primitives are
created at a size of 2 in blender.
This worked, but:
- [1] it logged something like size=2, scale=2,2,2 for a 2x2x2 cube
[which does not sound right, it should be size=2 scale=1,1,1]
- [2] it had to make an exception for the case scale is exactly 1x1x1
[this happens when the property is not set specifically, e.g. adding
primitives from the menu]
-- this exception led to double sized primitives being created when the
tool asked for exact dimensions of 1x1x1
Now - instead of compensating in `make_prim_init()` - do this earlier in
the tool itself, see `view3d_interactive_add_modal`, this fixes the bug
and now also correctly logs size=2 scale 0.5,0.5,0.5 for a 1x1x1 cube.
Maniphest Tasks: T86347
Differential Revision: https://developer.blender.org/D10632
projectors
Make this clear in property UI descriptions and deactivate aspect &
scale fields if no camera projectors are present.
ref T86268
Maniphest Tasks: T86268
Differential Revision: https://developer.blender.org/D10634
This adds support for creating a `BlendFile` (internally called `Main`),
which is limited to a context.
Temporary data can now be created which can then use
`.libraries.load()` the same as with `bpy.data`.
To prevent errors caused by mixing the temporary ID's with data in
`bpy.data` they are tagged as temporary so they can't be assigned
to properties, however they can be passed as arguments to functions.
Reviewed By: mont29, sybren
Ref D10612
The handle of a drawing callback can be removed within the drawing function itself.
This causes `var = (type)(((Link *)(var))->next` to read an invalid memory value in C.
Something in this update broke the floor() function in CUDA, instead use
floorf() like we do everywhere else in the kernel code. Thanks to Ray
Molenkamp for identifying the solution.
It looks like we never generated correct icon previews for images with
float_rects (non-8bit-images). Images from the report were 16bit pngs.
In this case, `icon_preview_startjob` would return early (it only
checked if the ImBuf `rect` was NULL -- which is the case if it has a
`rect_float` instead). This is not neccessary since `icon_copy_rect` is
perfectly capable of taking float rects.
Now correct the check and only return early if both `rect` & `rect_float`
are NULL.
note: this will not refresh icon previews from existing files
automatically. For this, use File > Data Previews > Clear Data-Block
Previews.
Maniphest Tasks: T86210
Differential Revision: https://developer.blender.org/D10601
Caused by {rB85421c4fab02}.
Above commit treated `SOCK_RGBA` and `SOCK_STRING` the same in
`std_node_socket_draw`.
That would turn a RGBA button into a text button (for attribute search),
leading to trouble.
Note these were just treated the same prior to above commit because both
were doing the layout split.
Now just give RGBA sockets their own case.
Maniphest Tasks: T86373
Differential Revision: https://developer.blender.org/D10646
This reverts commit 7a34bd7c28.
Broke windows build. Can apparently fix with /Zc:preprocessor flag
for windows but need a Windows dev to make that fix.
Since {rB7a6b46aac56b}, particle systems were named "ParticleSettings"
by default, same as particle settings themselves. These are not the same
thing and their names should reflect that.
Issue came up in T86366.
Now name them "ParticleSystem" by default, name uniqueness is preserved
for both system and settings.
Maniphest Tasks: T86366
Differential Revision: https://developer.blender.org/D10641
But this time the root cause. Writing undo files is done in a separate
thread. This patch moved the updating of the matte_id when the user
actually changes the matte.
The commit rB6f63417b500d that made exact boolean work on meshes
with holes (like Suzanne) unfortunately dramatically slowed things
down on other non-manifold meshes that don't have holes and didn't
need the per-triangle insideness test.
This adds a hole_tolerant parameter, false by default, that the user
can enable to get good results on non-manifold meshes with holes.
Using false for this parameter speeds up the time from 90 seconds
to 10 seconds on an example with 1.2M triangles.
The missing update has two sources:
The TimeSampling used for looking up transformations in the cache was
uninitialized. To fix this, simply use the TimeSampling from the last
transformation in the hierarchy (that is the object's parent), which
should also contain the time information for all of its parents.
The objects are not tagged for update when their trasformations change.
The Exact boolean used in the cell fracture addon incorrectly
kept some outside faces: due to some raycasts going into open
eye socket then out of the head, leading to one ray direction
(out of 8) saying the face was inside the head. The current
code allowed 1 of 8 rays only as "inside" to accommodate the
case of a plane used in boolean to bisect. But this cell fracture
case needs more confidence of being inside. So changed the
test for intersection to require at least 3 of 8 rays to be inside.
Maybe the number of rays to indicate insideness should be exposed
as an option, to allow user tuning according to the degree of
"non-volumeness" of the arguments, but will try at least for now
to magically guess the right value of the rays-inside threshold.
Note: all of this only for the case where the arguments are not
all PWN (approx: manifold). The all-PWN case doesn't use raycast.
Instead of returning a raw pointer, `LinearAllocator.construct(...)` now returns
a `destruct_ptr`, which is similar to `unique_ptr`, but does not deallocate
the memory and only calls the destructor instead.
The main change is that large allocations are done separately now.
Also, buffers that small allocations are packed into, have a maximum
size now. Using larger buffers does not really provider performance
benefits, but increases wasted memory.
This is a complete rewrite of the derived node tree data structure.
It is a much thinner abstraction about `NodeTreeRef` than before.
This gives the user of the derived node tree more control and allows
for greater introspection capabilities (e.g. before muted nodes were
completely abstracted away; this was convenient, but came with
limitations).
Another nice benefit of the new structure is that it is much cheaper
to build, because it does not inline all nodes and sockets in nested
node groups.
Differential Revision: https://developer.blender.org/D10620
This attribute exposes mesh vertex normals as a `vertex_normal`
attribute for use with nodes. Since the normal vector stored in
vertices is only a cache of data computable from the surrounding faces,
the attribute is read-only. A proper error message for attempting to
write this attribute is part of T85749. A write-only normal attribute
will likely come later, most likely called `corner_normal`.
The normals are recomputed before reading if they are marked dirty.
This involves const write-access to the mesh, protected by the mutex
stored in `Mesh_Runtime`. This is essential for correct behavior after
nodes like "Edge Split" or nodes that adjust the position attribute.
Ref T84297, T85880, T86206
Differential Revision: https://developer.blender.org/D10541
Because the search didn't run when the menu first opens, the attributes
appeared in a different order than after you typed anything into the
search field. This commit instead runs the search when the menu
is first opened, but it only sorts items without filtering.
Continuation of work in 2e221de4ce and 249e4df110 .
This prepares things so we can start porting the individual ID types to
the new code design. I already added some code for library IDs, because
they need some special handling during construction, which I didn't want
to break.
The `AbstractTreeElement::isExpandValid()` check can be removed once
types were ported and can be assumed to have a proper `expand()`
implemenation.
Also makes `TreeElementGPencilLayer` `final` which I forgot in
e0442a955b.
Mistake in aa3a4973a3. The expanded `ELEM()` check would include
`0 && te->idcode != 0`, which always evaluates to `false`/`0`. That
wouldn't cause the asset to fail, but the `te->idcode` part would never
be checked.
Fixed the error and cleaned up the check against "0" with a check
against `TSE_SOME_ID`, see b9e54566e3.
Code to check if the Outliner tree-element type was the general ID one
would always check against "0" (explicity or even implicitly). For
somebody unfamiliar with the code this is very confusing. Instead the
value should be given a name, e.g. through an enum.
Adds `TSE_SOME_ID` as the "default" ID tree-element type. Other types
may still represent IDs, as I explained in a comment at the definition.
There may also still be cases where the type is checked against "0". I
noted in the comment that such cases should be cleaned up if found.
Add `BKE_pose_apply_action(object, action, anim_eval_context)` function
and expose in RNA as `Pose.apply_action(action, evaluation_time)`.
This makes it possible to do the following:
- Have a rig in pose mode.
- Select a subset of the bones.
- Have some Action loaded that contains the pose you want to apply.
- Run `C.object.pose.apply_pose_from_action(D.actions['PoseName'])`
- The selected bones are now posed as determined by the Action.
Just like Blender's current pose library, having no bones selected acts
the same as having all bones selected.
Manifest Task: T86159
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D10578
Add an RNA function `activate_asset_by_id(asset_id: ID, deferred: bool)`
to the File Browser space type, which intended to be used to activate an
asset's entry as identified by its `ID *`. Calling it changes the active
asset, but only if the given ID can actually be found.
The activation can be deferred (by passing `deferred=True`) until the
next refresh operation has finished. This is necessary when an asset has
just been added, as it will be loaded by the filebrowser in a background
job.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D10549
Is based on Google style which was used in the Libmv project before,
but is now consistently applied for the sources of the library itself
and to C-API. With some time C-API will likely be removed, and it
makes it easier to make it follow Libmv style, hence the diversion
from Blender's style.
There are quite some exceptions (clang-format off) in the code around
Eigen matrix initialization. It is rather annoying, and there could be
some neat way to make initialization readable without such exception.
Could be some places where loss of readability in matrix initialization
got lost as the change is quite big. If this has happened it is easier
to address readability once actually working on the code.
This change allowed to spot some missing header guards, so that's nice.
Doing it in bundled version, as the upstream library needs to have some
of the recent development ported over from bundle to upstream.
There should be no functional changes.
Continuation of work in 2e221de4ce and 249e4df110. Now the tree-element
types have to be ported one by one. This is probably the most straight forward
type to port.
scenarios
In general, I could not find a reason executing from the python console
should not do an Undo push. Running a script from the Text Editor does
this as well and this seems generally useful.
Without an Undo push, one can easily run into situations were IDs have
been added or removed and undo on would then cause trouble (e.g. first
selection then bpy.ops.object.duplicate() -- this crashed as reported in
T86293 -- duplicate does not get its own undo push because it is not the
last op in the list, wm->op_undo_depth is not zero). This has changed
with the Undo refactor, so in essence the root cause is the same as
T77557, Legacy Undo does not suffer from the crash (but misses
the generally useful undo push from the console still)
Now add Undo to CONSOLE_OT_execute bl_options ('UNDO_GROUPED' seems more
appropriate than plain 'UNDO' since pasting multiple lines of code will
call CONSOLE_OT_execute multiple times in a row).
Maniphest Tasks: T86293
Differential Revision: https://developer.blender.org/D10625
These variables track the wmWindow.event_queue state,
however they were used in a way that wasn't correct.
- check_drag & check_click from wmWindow.eventstate
were used to track the click/drag status of events handled in
wmWindow.event_queue.
- Event's in the queue read from wmEvent.check_drag.
- Once a drag action was detected, wmWindow.eventstate.check_drag
was disabled.
Disabling drag in the event state would not change the drag state
for values already in the event queue.
Simplify logic by moving these values into the window,
so there is one place these variables are tracked.
- Only sort by the preset name (not it's directory).
- Remove redundant string conversion.
- Only call lower() once on the input.
- Don't assign the lambda to a variable for single use.
It is quite common to high framerate video with modern cameras. To make
it easier to edit this footage new framerate presets are added and the
soft limit increased.
Note there is a bug with preset ordering, Blender thinks "120" goes
before "24" this bug needs to be fixed before these changes can be
merged.
Differential Revision: https://developer.blender.org/D10553
Because of D10469 we can now not force child windows onto parent's monitor and allow them to go where they wish.
Differential Revision: https://developer.blender.org/D10593
Reviewed by Ray Molenkamp
Windows 10 supports V100 on all consoles given
you enable the ENABLE_VIRTUAL_TERMINAL_PROCESSING
flag for the console.
This patch enables color logging only on windows
10 and only if the log is not being redirected
to a file.
Differential Revision: https://developer.blender.org/D10546
Now, if the Autokey is not enabled, a new frame is not created and it is used the last active one. If no active frame, a message is displayed and the operation is canceled.
This is a common request for 2D artists.
Also, grease pencil was not working as Blender does in other areas.
Reviewed By: pepeland
Differential Revision: https://developer.blender.org/D10557
This was reported for remesh and skin modifiers.
These dont preserve UV layers (and probably cannot in a reasonable way),
so instead let the UV Project modifier create a new (equally named) UV
layer (as was suggested by @brecht in T59376).
Maniphest Tasks: T59376
Differential Revision: https://developer.blender.org/D10617
The `MAX_LIBARRAY` define was an annoying doublon to the `INDEX_ID_MAX` enum value
now defined in `DNA_ID.h`, and it is no more useful.
And comments were somewhat outdated. Also added an explanation about
chosen order for the `INDEX_ID_<IDTYPE>` order.
Since Blender is single-tabbed, this will prevent extraneous
tab-related options from appearing in "Window" menu in case AppKit's
internals change.
Reviewed By: #platform_macos, sebbas, ankitm
Differential Revision: https://developer.blender.org/D10606
Pasting nodes can create new id relations, because nodes can reference IDs.
Therefore the depsgraph has to be updated when nodes are pasted.
We could somehow check if the pasted nodes referenced IDs, but I'm not sure
if this complexity is worth it.
Replace static methods with regular methods.
Now the 'Main' value is taken from the collection.
Needed to support multiple 'Main' instances in Python, see T86183.
Note that this still does not work when in the node group directly referenced
by the modifier, only in sub-node-groups. This limitation will be removed
at some point.
By default objects are no longer GC tracked, this removes some overhead
although it's not significant in my own testing.
- Only enable GC for StructRNA when 'WITH_PYTHON_SAFETY' is on.
- Only track StructRNA when their 'reference' is set.
- Add missing NULL check when 'WITH_PYTHON_SAFETY' is on
and objects new objects be created.
When building `install`, linking blender_test fails because
test libraries do not exist. This happened on lite + Xcode. Error in
{rBdcb2821292f962951e88f146cb304160f21f73da}.
Reviewed By: #platform_macos, brecht
Differential Revision: https://developer.blender.org/D10607
None of these properties can be animated, so it doesn't make sense
to leave space for decorators on the right side of the panels. In fact
that is what was intended, but they were not manually disabled
in all of the panels.
Because pressing enter will choose the current search item from the menu,
and there was no search item with an empty string, it was impossible to
clear the text of an attribute text field. This commit adds a simple "X"
icon in the top row when you delete the string.
This commit exposes the strings used in the node error messages for
localization. It also changes the message tooltip creation to
automatically add the period at the end, to be more consistent with
the (arguably bad) design of other tooltips in Blender.
Calling `TIP_` directly in the node implementation files allows us to
continue using `std::string` concatenation instead of passing variadic
arguments. It's also more explicit about which part of the message is
translated and which isn't. The files already include the translation
header anyway.
`new` allocates a new object that needs to be autoreleased.
Reviewed By: #platform_macos, sebbas, ankitm
Maniphest Tasks: T86222
Differential Revision: https://developer.blender.org/D10597
The SSS shader in Eevee has the following drawbacks (elaborated in {T79933}):
1. Glowing
2. Ringing. On low SSS jittering it is rendered a bunch of sharp lines
3. Overall blurriness due to the nature of the effect
4. Shadows near occlusions as in T65849
5. Too much SSS near the edge and on highly-tilted surfaces
{F9438636}
{F9427302}
In the original shader code there was a depth correction factor, as far as I can understand for fixing light bleeding from one object to another. But it was scaled incorrectly. I modified its scale to depend on SSS scale*radius and made it independent from the scene scale. The scale parameter (`-4`) is chosen so that it makes tilted surfaces to have visually the same SSS radius as straight surfaces (surfaces with normal pointed directly to the camera).
This depth correction factor alone fixes all the problems except for ringing (pt. 2). Because of float-point precision errors and irradiance interpolation some samples near the border of an object might leak light, causing sparkly or dashed (because of aliasing) patterns around the highlights. Switching from `texture()` to `texelFetch()` fixes this problem and makes textures on renders visually sharper.
An alternative solution would be to detect object borders and somehow prevent samples from crossing it. This can be done by:
1. Adding an `object_id` texture. I think it requires much more code changing and makes the shader more complicated. Again, `object_id` is not interpolatable.
2. Watch gradient of depth and discard samples if the gradient is too big. This solution depends on scene scale and requires more texture lookups. Since SSS is usually a minor effect, it probably doesn't require that level of accuracy.
I haven't notice it in practice, but I assume it can make visible SSS radius slightly off (up to 0.5 px in screen space, which is negligible). It is completely mitigated with render sampling.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D9740
This is ported from Cycles and fixes issues with bump/normal mapping
giving weird reflections/lighting.
Fixes T81070 Specular light should be limited to normal pointing toward the camera
Fixes T78501 Normal mapping making specular artifact
Steps to reproduce:
- switch to Scripting workspace
- execute bpy.data.meshes['Cube'].copy()
- Outliner will not show the new mesh immediately
Now just send appropriate notifier.
Differential Revision: https://developer.blender.org/D10584
The `bNodeLinkDrag` struct was NULL when dragging a node instead of
a link. It is allocated with `calloc` anyway, so this field doesn't
need to be explitely cleared.
This commit includes a few simple improvements to the direct mesh
boolean code added recently.
- Passing the transforms and meshes to `direct_mesh_boolean` as spans
makes the function easier to call from C++.
- The definition of `TransMat`, was unecessary when we have the
`float4x4` type already used elsewhere in C++ code.
Differential Revision: https://developer.blender.org/D10592
The socket drag operator stored the index of the last picked socket
into RNA in case the mouse cursor leaves the link while dragging.
This id was not unique which is why sometimes a link from an other node
with the same id is picked.
This patch changes the way the last picked link is stored and stores a
pointer to the link directly into bNodeLinkDrag struct instead.
Differential Revision: https://developer.blender.org/D10590
The Python API for the curve mapping widget offers the `update`
function, but no way to reset the view to the clipping rectangle.
This commit adds a blenkernel function for this operation,
and exposes it to the CurvMapping RNA API. This allows addons
to display a more user-friendly view of the data in this widget.
Differential Revision: https://developer.blender.org/D10561
This commit adds a search for existing attributes when you click
on an attribute field. This is useful because otherwise you have
to remember which attributes should be available at each node in
the tree.
The fundamental complication is that this information is not
accessible statically. So the search data is only a cache from
the previous node tree evaluation. The information is added
with `BKE_nodetree_attribute_hint_add`, currently for every
input geometry socket for a single node.
This is only an initial implementation, and later versions will
expose the data type and domain of the attributes.
Differential Revision: https://developer.blender.org/D10519
I landed D10527 in rB1a8aee0a7cec accidentally, and the version there was
missing a name change discussed in review. This commit just renames the
boolean variable controlling the special behavior for attribute search.
Original message meant for this change:
For geometry nodes we will use search buttons to display a list of
attributes available the last time the node tree was executed (D10519).
Because this list is just a hint, we need to be able to enter any string,
not just strings from the search items.
This patch adds a boolean option to string buttons to enable this.
The change is quite simple, changes to behavior are only required in
two places. The type-specific button struct changes help a lot here.
Differential Revision: https://developer.blender.org/D10527
In Blender, we used to use the term 'draw' to refer to information
displayed to the user. For version 2.80, it was decided to change these
instances to 'display' instead. This was to avoid the ambiguity between
end-user drawing tools and display options.
From the Oxford English Dictionary:
- Draw: produce (a picture or diagram) by making lines and marks on
paper with a pencil, pen, etc.
- Display: show (data or an image) on a computer, television, or
other screen.
Therefore, we should use draw when referring to drawing tools for
making marks, but use display when referring to information
shown/displayed to the user. From a user POV, the computer displays
certain information, whereas the user draws a mark.
Apparently this change was not implemented consistently, so this patch
changes all remaining relevant instances of "draw".
Differential Revision: https://developer.blender.org/D10551
Currently when you open an RNA collection search button, like a
vertex group selector, the search filter isn't applied until you
start typing, in order to display every option at the start.
Otherwise they wouldn't be visible, since the search filter would
run for the current text.
Currently this check happens in one place, but it relies on the
`changed` value of `uiBut`. This is fine in the interface directory,
but anywhere else it would require exposing `uiBut.changed`, which
is probably too low-level to expose.
The solution is adding an `is_first` argument to the search callbacks,
which is nice for a few reasons:
- They work at a higher level of abstraction, meaning they don't
have to worry about how exactly to tell if this is the first
search.
- It makes it easier to do special behavior when the search menu
is first opened.
- Then, obviously, it makes that state accessible without including
`interface_intern.h`.
Needed for attribute search: T85658
Differential Revision: https://developer.blender.org/D10528
Since the same node tree can be used in modifiers on different objects,
there can be multiple threads writing to the maps in the node tree UI
storage at the same time. The additions for attribute name hints and
error messages made it so this would often cause a crash or at least
an ASAN report. This patch adds locks to prevent multiple threads
from using the maps concurrently.
In a brief test I actually didn't observe a crash without the global
`bNodeTree` UI storage mutex, but I think it's necessary for the change
to be correct, and I did notice some unfreed memory without it anyway.
Ideally it would be in a node tree runtime struct though.
Differential Revision: https://developer.blender.org/D10577
The shadowing was computed on the light distance squared,
leaking to much light since it was integrating the extinction behind
the ligth itself.
Also bump the maximum shadow max step to the actual UI values. Otherwise
we get shadowing under evaluated because `dd` is too small.
Expand is a new operator for Sculpt Mode which is intended to be the main
tool for masking, Face Set editing, interacting with the filters and pattern
creation.
The fundamentals of the tool are similar to the previous sculpt.mask_expand
operator. It shares the same default shortcuts and functionality, making
the previous operator obsolete.
The shortcuts to execute the operator are:
- Shift + A: Expand mask
- Shift + Alt + A: Expand mask by normals
- Shift + W: Expand Face Set
- Shift + Alt + W: Resize current Face Set
The main changes compared to the previous sculpt.mask_expand operator are:
- Modal keymap, all operator options can be changed in real time while the
operator is running.
- Supports creating Mask, Face Sets and Sculpt Vertex Colors.
- Much better code, new features can be easily integrated.
Limitations:
- All Mask operations are supported for Sculpt Vertex colors, but not exposed
by default as their support is still experimental.
- Dyntopo does not support any Face Set or Sculpt Vertex Colors. functionality
(they are not implemented in general for Dyntopo).
- Multires does not support any feature related to geodesic distances.
- Multires does not support vertex colors.
- Multires does not support recursions.
- In Multires, Face Sets snaping does not initialize all current enabled Face
Sets when toggling snapping.
- In Multires, Face Sets are created at base mesh level (works by this by
design, like any other tool).
- Unlike the previous mask_expand operator, this one does not blur the mask
by default after finishing Expand as that does not fit the new design.
The mask can still be blurred by using the mask filter manually.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10455
The performance debug menu isn't used that often anymore as render doc
also show the timings. This patch will make sure that enabling the
performance debug view (21) does not crash blender.
The crash happened when the density in the Point Distribute node was
above zero but so small, that no point was generated. In this case, there
was a point cloud component, but the point cloud was empty, making some
attributes unavailable.
One could also make more attributes available in this case, but that can
be done separately if necessary.
Move low level logic to module code and versioning logic to versioning code.
Metas strip position was handled in diffrent way compared to other strips.
This was introduced in c8b0d25794 as bugfix for T28158.
I disagree with such design. Meta strips should be handled in same way as
any other strips.
I have tested this change and haven't found any problems.
No problems after checking T28158 as well.
There should be no functional changes on user level.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D9972
Nicely hidden bug in pose read library code, it was using the library
from the wrong ID as reference to relink the custom shape object pointer
(pose is data from Object, not Armature).
This is same issue as fixed by d857892553, but I forgot to check meta
strips. Meta strip output is always in render size.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10560
Applying negative offset to seek position before scanning doesnn't have
any effect. This change results in 1.5x faster seeking (random frame,
average value) in sample file with 30 frame GOP length.
If I am not mistaken, B frames can have pts that can be less than
pts of I frame that must be decoded. Even in this case though, B frame
packet will be stored after that I frame.
In addition, preseek value is de facto hardcoded so seeking would fail
if it could. This can be hard to spot though.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10529
Isolate RNA and operator logic from functions that create strips.
- Operator specific code was removed from `SeqLoadInfo` structure and
`SEQ_add_*` functions.
- Strip loading code was removed from RNA and operator functions.
- `SEQ_add_*` API was unified to work on `SeqLoadData` struct.
Only exception is image strip, which require files to be loaded
separately to strip creation itself. This is not ideal, but I think
it's acceptable.
- Some functions and variables were refactored so the code reads
better.
There are minor functional changes (coincidental bugfixes):
- Operator errors are reported per-strip. Previously they were not
reported at all?
- `new_sound()` RNA API function now create sound with length of 1
if source file does not exist. Previously it created strip with
length of 0.
- Replace selection operator property wasn't working correctly.
Fixed in this patch.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9760
This enables the quick access button [to show the relevant Texture in
the Properties Editor] for textures used in geometry nodes.
This goes in line to what we do for other textures:
- modifier textures have this button
- particle textures have this button
- brush textures will soon have it, too (see D9813)
When outside of the Properties Editor, the button will always show (if a
texture is actually assigned), but will be inactive if no suiting
Properties Editor to show the texture in can be found.
Note this also changes the behavior to not show the button if _no_
texture is assigned (as in: we are still showing the "New" button).
Previously it was always there (e.g. for modifier textures), even if it
would take us to an empty texture tab. (Sure, we could add a texture
there then, but imho it makes more sense to just start showing it once a
texture is already there)
For this to work with geometry nodes, the following chages were done:
- implement foreachTexLink for geonode modifiers
- new buttons_texture_user_node_property_add() that stores prop as well
as node
- also use NODE_ACTIVE_TEXTURE flag in geometry nodetrees
notes:
- this still uses the first suiting (as in: pinning does not interfere)
Properties Editor it finds, this should (maybe?) find the _closest_
Property Editor instead (see related feedback in D9813).
- this will already show the button for brush textures as well
(disabled), but there is another mandatory change in an upcomming commit
to make it work there as well (see D9813)
ref. T85278
Maniphest Tasks: T85278
Differential Revision: https://developer.blender.org/D10293
Currently the compositor reads cryptomatte meta-data from the render
result. When loading a multilayer open exr file the meta-data was ignored.
This patch will also load the cryptomatte meta-data from multilayer open
exr files.
This enabled workflows where the rendering and compositing are done in
separate scenes or for future changes where the cryptomatte node will
use the meta-data for name matching and color picking.
Reviewed By: Sergey Sharybin
Differential Revision: https://developer.blender.org/D10384
Utility to construct a cryptomatte session from a render result or
openexr file. This will allow D3959 to be more aware of the context
it is working on and would also support external render engines in
the cryptomatte color picker.
1638af109e &
bfc70a6a95
caused a regression with click-drag (not tweak which has it's own logic).
Restore some changes from these commits with added comments.
Minor changes from previous functionality from
39919e3532.
- `prevval` & `prevtype` are now set for all kinds of new events
in the queue previously this was not done for some kinds of events
(mouse wheel, ndof - for example).
- Set `prevval` & `prevtype` for other windows for mouse buttons.
This check was added before is_repeat was supported, use this variable
instead since it's more a more reliable way of detecting held keys.
Also remove outdated comment.
Rename:
- `BKE_animsys_store_rna_setting` → `BKE_animsys_rna_path_resolve`
- `BKE_animsys_read_rna_setting` → `BKE_animsys_read_from_rna_path`
- `BKE_animsys_write_rna_setting` → `BKE_animsys_write_to_rna_path`
The concept of "RNA setting" is unclear; the new names reflect better
what the functions actually do.
No functional changes.
Remove `animsys_evaluate_action()` and rename
`animsys_evaluate_action_ex()` to it. The only function of the former
was to call the latter, with the exact same parameters.
No functional changes.
Before this change messages of ERROR and above were printed.
This change makes it so LOG(INFO), LOG(WARNING), LOG(ERROR)
and LOG(FATAL) will be printed to the console by default
(without --debug-libmv and --debug-cycles).
On a user level nothing is changed because neither INFO nor
WARNING severity are used in our codebase. For developers this
change allows to use LOG(INFO) to print relevant for debugging
information. Bering able to see WARNING messages is also nice,
since those are not related to debugging, but are about some
detected "bad" state.
After this change the LOG(INFO) is really treated as a printf.
Why not to use printf to begin with? Because it is often more
annoying to print non-scalar types. Why not to use cout? Just
a convenience, so that all type of logging is handled in the
same way. When one is familiar with Glog used in the area, it
is easy to use same utilities during development. Also, it is
easy to change LOG(INFO) to VLOG(2) when development is done
and one wants to keep the log print but make it only appear
when using special verbosity flags.
The initial reason why default severity was set to maximum
possible value is because of misuse of VLOG with verbosity
level 0, which is the same as LOG(INFO). This is also why
back in the days --debug-libmv was introduced.
Now there is some redundancy between --debug-libmv, --debug-cyles
and --verbose, but changes in their meaning will cause user
level side effects.
Differential Revision: https://developer.blender.org/D10513
Usage of LOG(INFO) actually went against own guidelines in the
logging.h: the INFO is for messages which are to be printed
regardless of debug/verbosity settings.
Cryptomatte layers in Blender are predefined. Other render engines
might have other naming schemes. This patch will allow creation of
cryptomatte layers with other names. This will be used by D3959 to
load cryptomatte openexr files from other render engines.
EEVEE and Cycles still use our fix naming scheme so no changes are
detectable by users.
I made an incorrect comment in patch review that "Location"
should be used instead of position. "Position" is more appropriate
here since it refers to generic data rather than an object origin.
"Position" is also the name we chose for the attribute for this reason.
Move some drawing code from `area.c` and `ed_util.c` into `ed_draw.c`.
This is to support the new generic slider that wil be used in T81785.
No functional changes.
Reviewed By: #animation_rigging, #user_interface, Severin, sybren
Maniphest Tasks: T81785
Differential Revision: https://developer.blender.org/D9313
Add a CLI argument `--open-last` that opens the most recent file,
effectively doing the same as {key Ctrl Shift O}, {key Enter} after
starting Blender.
When there are no known recent files, print a warning and do nothing,
showing the startup file instead.
Note that this does not try to be smart about restoring the last Blender
session. It just opens the file from disk, as if the user had typed
`blender $(head -n1 ~/.config/blender/2.93/config/recent-files.txt)`.
There is also no smartness when that file cannot be opened; it behaves
exactly the same as typing the most recent filename on the CLI.
Reviewed by: mont29, campbellbarton
Differential Revision: https://developer.blender.org/D10563
The goal of the change is to perform check for attempts of icons
being overwritten on canvas. The check is based on checking original
coordinate of icons against all read icons. If there are two icon
files which have same original an error will be reported. The report
includes both file names to make it easier to troubleshoot.
This change will allow to early-on catch issues which we currently
have with the release environment: official Linux builds might have
different icon from Blender compiled locally. This is because the
order in which directory listing is traversed is not defined, so
it's like a race condition between two files to win the place in
the final canvas.
There is still possible improvement in the code to move more fields
into the context structure. This is beyond of goal of this change.
Note that before committing this change icons must be brought back
to their consistent state. Otherwise the build will fail.
Differential Revision: https://developer.blender.org/D9715
Simply disable advanced 're-use current blend data` process when loading
a memfile step and Global Undo is disabled, since there is no way to
ensure we have a proper 'differential' state in the stack then.
NOTE: this is a quick work-around to fix the crash, not a satisfying
solution by far (pretty sure there can still be crashes if you then
re-enable Global Undo afterwards e.g.).
Reflection
Anisotropic is not really supported in Eevee, but since code looks like
it is just intended to make it behave like glossy, it should function
like it too.
Seems like the internal calling from `node_bsdf_glossy` from
`node_bsdf_anisotropic` has swapped arguments.
Also: ssr_id is available for SH_NODE_BSDF_ANISOTROPIC as well (see
`ntree_tag_bsdf_cb`), so why not use it?
Maniphest Tasks: T84658
Differential Revision: https://developer.blender.org/D10547
Click detection logic relied on the event queue not accumulating events
as newly added events at the end of the queue adjusted
`wm->eventstate->prev{val/type}` which was then compared with events
at the front of the queue.
This made Ctrl-Click fail to detect the click as releasing Ctrl
set the previous value before the previous event was handled.
In practice this only happened in heavy scenes,
updating 10 fps or lower. It also made automated tests fail that
accumulate events before handling them.
This makes event's prevval and prevtype usable for events in the queue.
Previously they were unused, except as a hack for modal keymap handling.
This is needed to fix T86116, where the `wm->eventstate->prev{val/type}`
are set to values from events that have not been processed.
Currently the intended behavior regarding prevval/prevtype isn't
handled consistently. However, including cursor motion causes events
in `wm->queue` and `wm->eventstate` to behave differently,
where `wm->eventstate` ignores motion (necessary for click detection).
This makes checks from `wm->eventstate` to events in the queue fail.
This reverts 39919e3532,
using the `event.type` instead of it's previous type.
This works as it includes mouse button release events.
When polygons around a bevel are rebuilt, sometimes UVs are merged
around a new vertex in the case of the face opposite a single edge
being beveled on a 3-edge vertex. This should not have been done
if any of the edges at that vertex were a seam.
Triangulating ngons could fail with the method that was being
used: projecting along the dominant normal axis and then using CDT.
It could fail if the ngon has self crossings or might be so after
the described projection.
Switched to using projection along the normal itself, and also to
using polyfill which produces some kind of triangulation no matter
what in such circumstances. This will also likely be faster if
there are a lot of ngons in the meshes, since the exact arithmetic
CDT was being used before, and now float arithmetic is used.
Looks like they removed static libs by default in OCIO 2.0, for some
historical reasons `install_deps` was enforcing using only static libs
for this one, now removed it so that Blender buil can use usual so's.
When a GP object was parented to e.g. a bone, box selection as well as
point selection were broken in that the selection from the user would
not correlate with what was actually being selected.
The issue was that box and point selection did not use the active
evaluated stroke data. The fix uses the correct data.
Reviewed By: antoniov
Maniphest Tasks: T85987
Differential Revision: https://developer.blender.org/D10555
This patch adds an output field to the Attribute Proximity node and
renames the existing string socket from "Result" to "Distance".
- The "Distance" output contains distance to the closest position
on the Target geometry.
- The new "Location" output contains the coordinates of the closest
position on the Target geometry.
A basic use case for this data is a simple shrinkwrap operation.
Differential Revision: https://developer.blender.org/D10415
The location of the shaders changed with OSL 1.11.10. This commit is therefore in addition to D10212.
@sybren With the latest SVN libraries, I am fairly certain there is a "OSL not found" in the CMake output. Can you check on Linux?
@LazyDodo Since you haven't pushed the new OSL libs yet, this should not be a problem on Windows. So this will only be needed whenever those land.
Reviewed By: LazyDodo
Differential Revision: https://developer.blender.org/D10552
Tools can cache data related to the mesh topology for later use. This
data is indexed by vertex index, so it will be invalid after dyntopo
changes the topology during the stroke.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10550
This patch adds manifest parsing to Cryptomatte. Normally when loading
cryptomatte layer from an OpenEXR file the manifest contains data to
convert a hash to its original name of the object/material. In the
future we want to use this to support lookup of cryptomatte
hashes and show it to the user.
Currently this logic isn't available to users (for now), but is required
by D3959 where a new cryptomatte workflow is implemented.
Fill only if it never comes in contact with an edge. It is better not to fill than to fill the entire area, as this is confusing for the artist.
Differential Revision: https://developer.blender.org/D10536
Render previews for Action datablocks by rendering the scene camera with
the Workbench (solid) engine. The //look// can be configured by setting
the scene's render engine to Workbench and editing the scene's shading
properties.
It is assumed that the pose has already been applied and that the scene
camera is capturing the pose. In other words, the render function just
renders from the scene camera without evaluating/applying the Action
stored in `preview->id`. The ID is only used to determine its type and
to store the resulting preview.
Not all code paths that lead to the `action_preview_render()` function
actually provide a depsgraph. The "Refresh Asset Preview" button
(`ED_OT_lib_id_generate_preview`) does, but `WM_OT_previews_ensure` does
not.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D10543
When a lot of libraries or linked IDs were missing/not found when
loading a .blend file, Blender used to show one warning report for each
missing item, potentially covering the user's screen with a giant
unuable popup.
Now it will instead generate a single warning with amount of missing lib
files and linked IDs. Each missing item is still reported individually,
but only as `INFO`, so it will still show up in the console or Info editor.
Undo/redo was crashing & asserting.
There ware two bugs:
- Entering particle system edit-mode requires an evaluated depsgraph.
- The active object could get out of sync when undo/redo
moves between different modes.
The new test 'view3d_mesh_particle_edit_mode_simple'
in `tests/ui_simulate/test_undo.py` exposes both issues.
"Shift to parent" does not make any sense for collections since they
don't have parenting like objects. This commit just adds a simple check
for whether the first drag ID is an object before displaying
that part of the message.
Differential Revision: https://developer.blender.org/D10203
When opening the SVG you wouldn't even see the icons, since they are all white
now. You'd always have to set up a document background color and make sure to
undo that again before saving the file, so it's not written into it.
Just make everyone's life easier by saving the file with a proper background
(gray with checkerboard).
Inkscape often does a number of unrelated changes when saving an SVG, not sure
if these are just formatting changes in the source SVG text or if there's more
to it. Either way this makes adding new icons hard since you want to avoid
these unrelated changes. Saving the file in a new Inkscape version every once
in a while should mitigate the problem a bit.
Regenerating the icons (e.g. through `make icons`) shows no difference in the
output.
Note that I also ran "Clean Up Document" in Inkscape, but that doesn't seem to
have changed anything/much.
The Purge operator to remove unused IDs can now also remove 'indirectly
unused' data-blocks (those only used by unused ones, recursively).
It can also now only operate on linked, or on local data.
All those options are exposed in the `File -> Cleanup` main menu.
The behavior of the `Purge` button in the Outliner remains unchanged,
needs some UI/UX design task for that.
This API function can now purge recursively in a single call, and choose
to ignore (not purge) local or linked IDs.
Default behavior (with not argument) remains unchanged, so no API
breackage here.
This was rather obscure and non-critical issue, but in some cases ID
usercount of some deleted IDs from batch-deletion code would not be
properly nullified, which would then assert later in actual deletion
code.
With the option to detect orphaned data recursively (i.e. if ID `a` is the
only user of ID `b`, and ID `a` is unused, ID `b` will also get tagged
as unused).
To be used by the Purge operation.
Previously the padding size and the width saved for the icon were
constant regardless of the zoom level. This resulted in overlapping
icons and text, and ugly padding with more extreme zoom levels.
We can retrieve the size of the row from the `rect` argument.
An error doesn't make sense in these situations because we don't expect
to find attributes on empty geometry, and an empty geometry set is a
valid situation.
Note that we can't use `component.is_empty` here, because often the
component is visually "empty" but still has a point cloud with no
points or a mesh with no vertices.
This concerns currently only collections (`master_collection` of scenes)
and root node trees. It removes the matching type-specific helpers
(`BKE_collection_master_scene_search` and `BKE_node_tree_find_owner_ID`).
No functional change expected here.
NOTE: Current implementation of `owner_get` is far from optimal, we
could probably do it better, see {T69169}.
NOTE: While it could also have it, shapekeys IDTypeInfo was left out of
this change for now. Mainly because it sould not be used currently, and
we ultimately want to demote shape keys from ID status anyway.
In rare cases, it's possible for an object to have edit-mode data
without it's Object.mode set to edit-mode.
This could happen with undo, part of fix for: T85974.
Use OBEDIT_FROM_VIEW_LAYER macro for curve & fonts (matching edit-mesh).
While the difference isn't significant at the moment,
there are no reason these should be different between undo systems.
This issue seems to be caused by the reallocation flag not being set on
the device shader data array so it was never updated on the GPU although
the host memory was modified.
These defines seem to be left over from the initial implementation
of the node editor. In a few places the values were used in button
creation, but the callbacks never checked the value anyway.
Node uiBlocks also had a callback what would never do anything
since the value it checked for was never used.
Following the naming conventions defined in T56648, where in this
instance there were still a few remaining uses of the old term.
Differential Revision: https://developer.blender.org/D9817
Clear the weird term "Metaelement".
These are the metaballs (elements) inside one metaball objects.
- "Meta Ball" to "Metaball"
- "Metaelement", "Meta element" to "Metaball element"
Differential Revision: https://developer.blender.org/D9910
Changes include using proper and consistent grammar, simplifying
phrasing, using correct terminology, and not including python API
identifiers in tooltips.
Differential Revision: https://developer.blender.org/D9924
The colons are not necessary in these situations because it's clear
that the label applies to the next group of buttons anyway, and they
add unecessary visual complexity. Committing as part of D9924.
In vertex selection mode, the "At First" and "At Last" options are
contextually added to the beginning of the list of merge operations.
This means the automatic shortcuts in the merge menu are different,
making learning the shortcuts much more difficult than necessary.
This patch reorders the items so that "At First" and "At Last" are
added after the first three options so the shortcuts are always
consistent.
Fixes T84335
Differential Revision: https://developer.blender.org/D10008
This commit tweaks how virtual sockets (unconnected node group input
and output sockets) are drawn to make them more recognizable. The
outline is changed to a gray color, and they get a dark inner color.
Differential Revision: https://developer.blender.org/D10080
When using particle mode, the particle tool settings were always
displayed, even if select/cursor is the active tool. This patch
hides the properties of the particle tools for non-brush tools,
using the same check as in other modes.
Differential Revision: https://developer.blender.org/D10266
Multiply the two number together. If the sign of the result is positive, then the sign was the same. If the sign of the result is negative, then the signs were different.
When closing the blender, while the callbacks are removed, the
reference count of the object used as `customdata` is not decremented.
This commit adds two functions that correctly release the
python `draw_callbacks` before releasing all `draw_callbacks`.
Differential Revision: https://developer.blender.org/D10478
Improved the calculation of the distances and changed the variable names to make it more readable.
Still, there are some corner cases that could be not handled properly, but we keep as is to test more real drawings to analyze if the small number of corner cases needs to be fixed or not.
This bumps OSL to 1.11.10.0. OSL Has a new build time
dependency: Clang, and more importantly it expects
clang and llvm to share a library folder, which it
previously for us did not.
This patch changes:
-OSL Update to 1.11.10.0
-refactor the llvm/clang/clang-tools-extra builds into the llvm
build using the llvm-project tarball for building that has all
of the subprojects in it.
-update ispc/openmp builds since clang no longer its own dependency
and they have to depend on the llvm build now.
-Update the windows builder to use the 64 bit host tools since it
ran out of ram linking clang
-Since OSL now needs clang to link successfully a findclang.cmake
has been provided for linux/OSX
Differential Revision: https://developer.blender.org/D10212
Reviewed By: brecht, sebbas, sybren
`object_in_any_collection` used during linking/appending to check
whether an object is already instanced by at least one collection, was
not taking into account embedded master collections from scenes.
With the previous implementation, we could have pixels with offset larger
than 1 pixel.
Also fix a bug when the closest_index is not last. The sample positions
were incorrect in this case.
This was caused by the window_translate_m4 not offsetting the winmat in the
right direction for perspective view. Thus leading to incorrect weights.
The workbench sample weight computation was also inverted.
This fix will change the sampling pattern for EEVEE too (it will just
mirror it in perspective view).
Using `make icons` for 420f538fad changed some icons that it shouldn't have
touched on my system. Not sure what caused this, maybe a bug in the slightly
outdated Inkscape version there (1.0.1). Here on macOS the version is only
reported as 1.0 so I'm not sure what the situation is. Either way, this fixes
the icons.
D9054 did multiple consecutive `immBegin()`/`immEnd()` draw calls to draw
multiple lines at varying thickness. This would only work for the first line,
then they'd all get a 1px thickness (at least on macOS).
Issue was that `wide_line_workaround_end()` called `immBindShader()` directly
to restore the old shader (which the workaround overrides). However this
doesn't set `imm->builtin_shader_bound` which has to be done for the workaround
to work on the next `immBegin()` call. Instead `immBindBuiltinProgram()` can be
called.
Differential Revision: https://developer.blender.org/D10520
Reviewed by: Clément Foucault
m_tabletInRange is no longer set for Wintab after 2e81f2c01a
reverted Wintab changes. This reverts most button processing to
behavior present in 2.91.2.
Left in place is a bugfix for Windows Ink: button events while a
Windows Ink pen is in range should still be processed. Events processed
by Windows Ink and not passed to DefWindowProc do not create WM_*BUTTON
events, but button events from e.g. tablet pad express keys do create
WM_*BUTTON events and should be handled.
Windows mouse history function GetMouesMovePointsEx has well documented
bugs where it receives and returns 32 bit screen coordinates, but
internally truncates to unsigned 16 bits. For mouse (relative position)
input this is not a problem as motion events and the resulting screen
coordinates reliably fit within 16 bit precision.
For tablets (absolute position) the 16 bit truncation results in
corrupt history when tablet drivers use mouse_event or SendInput from
the Windows API to move the mouse cursor. Both of these functions take
absolute mouse position as singed 32 bit value on the range of 0-65535
(or 0x0-0xFFFF) inclusive. Values larger than 0x7FFF (the largest
signed 16 bit value) are reliably corrupt when retrieved from
GetMouesMovePointsEx history. This is true regardless of whether mouse
history is retrieved using display resolution (GMMP_USE_DISPLAY_POINTS)
or high resolution points (GMMP_USE_HIGH_RESOLUTION_POINTS), the latter
of which should return points in range 0-65535.
Reviewed By: brecht
Maniphest Tasks: T85874
Differential Revision: https://developer.blender.org/D10507
m_tabletInRange is no longer set for Wintab after 2e81f2c01a
reverted Wintab changes. This reverts most button processing to
behavior present in 2.91.2.
Left in place is a bugfix for Windows Ink: button events while a
Windows Ink pen is in range should still be processed. Events processed
by Windows Ink and not passed to DefWindowProc do not create WM_*BUTTON
events, but button events from e.g. tablet pad express keys do create
WM_*BUTTON events and should be handled.
Windows mouse history function GetMouesMovePointsEx has well documented
bugs where it receives and returns 32 bit screen coordinates, but
internally truncates to unsigned 16 bits. For mouse (relative position)
input this is not a problem as motion events and the resulting screen
coordinates reliably fit within 16 bit precision.
For tablets (absolute position) the 16 bit truncation results in
corrupt history when tablet drivers use mouse_event or SendInput from
the Windows API to move the mouse cursor. Both of these functions take
absolute mouse position as singed 32 bit value on the range of 0-65535
(or 0x0-0xFFFF) inclusive. Values larger than 0x7FFF (the largest
signed 16 bit value) are reliably corrupt when retrieved from
GetMouesMovePointsEx history. This is true regardless of whether mouse
history is retrieved using display resolution (GMMP_USE_DISPLAY_POINTS)
or high resolution points (GMMP_USE_HIGH_RESOLUTION_POINTS), the latter
of which should return points in range 0-65535.
Reviewed By: brecht
Maniphest Tasks: T85874
Differential Revision: https://developer.blender.org/D10507
There was a similar report prior to the introduction of the Image
Engine, see T74586.
This was fixed by rB6a5bd812b569 at that time, but got lost in the
refactor it seems.
Above commit introduced the `ED_space_image_get_display_channel_mask`
function that will determine
the valid bitflags for the display channel of a given ImBuf.
But since the refactor, this is not called anymore (`draw_image_main` is
not called anymore)
Now it seems we can safely reuse that said function
`ED_space_image_get_display_channel_mask` also for the Image Engine.
Maniphest Tasks: T85895
Differential Revision: https://developer.blender.org/D10510
There are some changes in Materials in the exporter that make compiling
the importer fail. I fixed one and several others are just ifdef'd out
for now so that the branch compiles. TODO to fix the rest.
This allows accessing attribute meta data like domain and data type
without having to create a `ReadAttribute`. I kept the `attribute_names`
method for now to keep the patch more self contained.
Differential Revision: https://developer.blender.org/D10511
Sync the list of icons in CMakeLists.txt with UI_icons.h.
Restore, in the source file, the FUND icon that was accidentally
deleted.
Delete four old/unused icons.
See also D9715.
Using `FunctionRef` is better than using `std::function`, templates and c function
pointers in some cases. The trade offs are explained in more detail in code documentation.
The following are some of the main benefits of using `FunctionRef`:
* It is convenient to use with all kinds of callables.
* It is cheaper to construct, copy and (possibly) call compared to `std::function`.
* Functions taking a `FunctionRef` as parameter don't need to be declared
in header files (as is necessary when using templates usually).
Differential Revision: https://developer.blender.org/D10476
There are cases where the default input passes of color+albedo do not yield useful results
and while this was possible to change that for final frame rendering (in the layer settings),
viewport denoising always used a fixed color+albedo. This adds an option to change the
input passes for viewport denoising too, so that one can use it in scenes that otherwise
wouldn't work well with it.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D10404
rBc70eb30240f8b5d5a8f2ac509f0eb585936142b5 added patch to use static
zlib on Linux. But also added flags to use the zlib in LIBDIR for
Python on macOS. That causes some shared libraries (binascii for one)
to link against libz.1.dylib which will not be there on users' systems.
Reuse the said patch for macOS also to avoid rpath issues.
Fix T85648.
Reviewed By: #platform_macos, brecht
Differential Revision: https://developer.blender.org/D10479
Constraint of new window position can be incorrect when using multiple monitors.
Differential Revision: https://developer.blender.org/D10469
Reviewed by Brecht Van Lommel
Remove the setting of Dialog window styles until we confirm expected behavior between platforms.
Differential Revision: https://developer.blender.org/D10470
Own Code
Removal of 'camera frame' around blend file thumbnail images.
Differential Revision: https://developer.blender.org/D10490
Reviewed by Brecht Van Lommel
Refactoring: WM_window_open() that can open different types of windows. 'New Window' with simplified layout.
Differential Revision: https://developer.blender.org/D10419
Reviewed by Brecht Van Lommel
Geometry nodes were not adding referenced instanced collections as
dependencies to depsgraph.
This would lead to meshes and data not being ready on evaluation in
certain cases.
This updates platform/platform_win32.cmake to support
both the old and new library names for OpenXR.
The new version links against one additional system
library and the debug library filename changed ever
so slightly.
This is a temporary workaround and can be removed
once the new lib versions have landed.
Rather than hardcoding the lib names, read
boosts version.hpp and extract the version
from there.
This will make it easier to land lib changes
in the near future.
Specular color is set to black instead of white inside the Principled BSDF
when the base color is set to fully black. This is contradictory to the sample
code of the Disney BRDF in BRDF Explorer. This patch aligns both
implementations.
Differential Revision: https://developer.blender.org/D10448
rB1f5647c07d15 introduced for the first time a unicode escape in strings
to be translated, directly extracted from C-code itself.
This revealed that this case was not properly handled by current code,
for now we work around using `raw_unicode_escape` encoding/decoding of
python.
Improvements to how window states are determined and changed.
Differential Revision: https://developer.blender.org/D10470
Reviewed by Brecht Van Lommel
Taa offset was applied on first sample. This wasn't happening before
DOF refactor.
Also fixes T85618 Wireframe Displays Strangely in Eevee (Rendered,
material Preview)
Contact shadows needed correct `gl_FragCoord.z` but this is not
correctly set for fullscreen passes. Need to pass depth using a global
variable until we get rid of `cl_eval.tracing_depth`.
This was introduced in the new geodesic distances algorithm for proportional
editing. When all faces of an edge are hidden, that edge should be considered
as loose geometry.
Initial patch by Pablo with modifications by Brecht.
Differential Revision: https://developer.blender.org/D10488
Currently the GPU module for python has different ways to handle enums.
- Organizing items in `PyC_StringEnumItems` arrays and parsing them with `PyC_ParseStringEnum`.
- Using dedicated functions for each type of enum (`bpygpu_ParsePrimType`, `pygpu_ParseVertCompType` and `pygpu_ParseVertFetchMode`).
Although apparently more efficient (especially `pygpu_ParseVertCompType`
which transforms strings into integers for simple comparison), these
dedicated functions duplicate functionality, increase the complexity of
the code and consequently make it less readable.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D10456
With very large distances there were precision / overflow errors, normalize
the average albedo to avoid that. This was causing test failures on macOS
Arm, but also other architectures had slightly wrong results.
Ref T78710
The Exact modifier code had been written to avoid using BMesh but
in the initial release the modifier still converted all Meshes to
BMeshes, and then after running the boolean code on the BMeshes,
converted the result back to a Mesh.
This change skips that. Most of the work here is in getting the
Custom Data layers right. The approach taken is to merge default
layers from all operand meshes into the final result, and then
use the original verts, edges, polys, and loops to copy or interpolate
the appropriate custom data layers from all operands into the result.
When opening a Blender version for which there are no preferences, the splash
shows a button like "Load 2.92 Settings". Using this could cause a memory leak
of the storage for recently opened files.
The "quick setup" dialog is actually a 'menu', and the "splash screen" block
contains the UI_BLOCK_LOOP flag which causes the buttons' text to align
to the left, however, usually regular buttons have centered text.
As a workaround, add the UI_BLOCK_QUICK_SETUP flag which prevents
the text from being left-aligned.
Differential Revision: https://developer.blender.org/D10486
Reviewed by: Julian Eisel
Support Python 3.10a5 or 3.9x with support explicitly enabled.
- Enable Python's postponed annotations for Blender's RNA classes
types registered on startup.
- Using postponed annotations has implications for how they are defined,
since they must evaluate in the modules name-space instead of the
classes name-space. See changes to annotations in `release/scripts`.
- Use `from __future__ import annotations` at the top of the module
to ensure the script will run with Python 3.10.
- Old logic is kept since it could be used if PEP-649 is supported.
Resolves T83626
Ref D10474
This adds an approximation of inverted AO by reversing the max horizon
search (becoming a min horizon). The horizons are correctly clamped in
the reverse direction to the shading and geometric normals.
The arc integration is untouched as it seems to be symetrical.
The limitation of this technique is that since it is still screen-space
AO you don't get other hidden surfaces occlusion. This is more
problematic in the case of inverted AO than for normal AO but it's
better than no support AO.
Support of distance parameter was easy thanks to recent AO refactor.
Fix regression with roughness not masking reflections when not using
Screen Space raytracing.
The trick was to only evaluate one planar per pixel, the one with
the most influence. This should not be too limiting since this is what
we do for SSR.
Also change evaluation order do not apply occlusion on planars probes.
- Fix noise/banding artifact on distant geometry.
- Fix overshadowing on un-occluded surfaces at grazing angle producing "fresnel"
like shadowing. Some of it still appears but this is caused to the low number
of horizons per pixel.
- Improve performance by using a fixed number of samples and fixing the
sampling area size. A better sampling pattern is planned to recover
the lost precision on large AO radius.
- Improved normal reconstruction for the AO pass.
- Improve Bent Normal reconstruction resulting in less faceted look on
smoothed geometry.
- Add Thickness heuristic to avoid overshadowing of thin objects.
Factor is currently hardcoded.
- Add bent normal support to Glossy reflections.
- Change Glossy occlusion to give less light leaks from lightprobes.
It can overshadow on smooth surface but this should be mitigated by
using SSR.
- Use Bent Normal for rough Glossy surfaces.
- Occlusion is now correctly evaluated for each BSDF. However this does make
everything slower. This is mitigated by the fact the search is a lot faster
than before.
Previously, methods like `Span.drop_front` would crash when more
elements would be dropped than are available. While this is most
efficient, it is not very practical in some use cases. Also other languages
silently clamp the index, so one can easily write wrong code accidentally.
Now, `Span.drop_front` and similar methods will only crash when n
is negative. Too large values will be clamped down to their maximum
possible value. While this is slightly less efficient, I did not have a case
where this actually mattered yet. If it does matter in the future, we can
add a separate `*_unchecked` method.
This should not change the behavior of existing code.
Expanded enum items like this usually have centered text, but there are
limitations in the popup code that break this here. Add a workaround for this
limitation.
Differential Revision: https://developer.blender.org/D9854
Reviewed by: Julian Eisel
This patch adds a to_curve method to the Object ID. This method is
analogous to the to_mesh method. The method can operate on curve and
text objects. For text objects, the text is converted into a 3D Curve ID
and that curve is returned. For curve objects, if apply_modifiers is
true, the spline deform modifiers will be applied and a Curve ID with
the result will be returned, otherwise a copy of the curve will be
returned.
The goal of this addition is to allow the developer to access the splines
of text objects and to get the result of modifier applications which was
otherwise not possible.
Reviewed By: Brecht
Differential Revision: https://developer.blender.org/D10354
Previously the same functions were used to both set and get the active
state for outliner tree elements. This has quite a few problems.
- It's hard to tell when data is changed or simply read
- It prevents using `const`
- The code is full of if statements, making it longer and less readable.
This commit replaces the `tree_element_type_active` and
`tree_element_active` functions with `_get` and `_set` variants. One
has const arguments and returns the active state, the other deals only
with setting the state. While this refactor results in slightly more
lines of code, the result is much better in my opinion.
This commit also removes unused variables from arguments of the affected
functions.
Differential Revision: https://developer.blender.org/D10232
This commit adds a simple string input node, intended for use in the
attribute workflow to make using the same attribute name in multiple
places easier. The node is function node similar to the existing vector
input node.
Ref T84971
Differential Revision: https://developer.blender.org/D10316
This makes the nodes look more consistent with the rest of the UI
by using the same split with right aligned labels as the property editor
and elsewhere. Additionally, for consistency, the "Type" part of some
dropdowns is removed. It already wasn't displayed everywhere, and
it gets redundant quite quickly.
The "Hide Collection" operators assigned to the number keys in edit mode
trigger a redraw of the outliner, but as an optimization, they do *not*
trigger a rebuild of the tree.
This optimization is valid because unlike the collection exclude toggle,
the heirarchy is not affected by collection visibility. However, it means
that currently you must trigger a rebuild to get the correct "grayed out"
status after using the operator.
Rather than trigger a rebuild in this case to solve the bug, this patch
moves the decision for whether to gray out the text of a tree element
to the draw step rather than the build step. This means that any change
to the corresponding properties doesn't require a full tree rebuild.
Note that changing the "hide_viewport" property from the outliner still
causes a tree rebuild. I think that's because of the checks in
`outliner_collection_set_flag_recursive_fn`.
That could be optimized in the future.
Differential Revision: https://developer.blender.org/D10240
Add the Simple subdivision option to Geometry nodes, as a new node
instead of part of the existing subdivision node because of future
backend changes to the Simple option. (See T85584)
https://developer.blender.org/D10409
This reverts commit 7ee518cf70.
Causes T84869. The initial issue is less bad than this. We are looking into
alternative fixes for 2.93 (see D9854 and D9853).
This adds fuzzy search functionality to various input fields in Blender
where one can choose a value from many existing values (e.g. the
Vertex Group property in the Displace modifier).
Differential Revision: https://developer.blender.org/D10446
Following with the changes included to interpolate strokes of different number of points, a full review has been done in the interpolation tools.
* Interpolate now is a tool and not an operator. It was not logic to have this tool as a button.
* Interpolate tool parameters have been moved to topbar.
* Interpolate popover has been removed from topbar and interpolate `Sequence` operator has been moved to grease pencil menu.
* Interpolate Sequence now include a Redo panel.
* Interpolate tool now allows to select the strokes by pairs. This allows to interpolate any stroke with any stroke and not as before that it was only possible by drawing order. If no stroke is selected, the interpolation is done as before.
* Now is possible interpolate again if a previous keyframe exist. Before, it was impossible to interpolate two times in same frame and this made impossible to do the interpolation by groups of frames.
* New automatic option to `Flip strokes` if the stroke and end are not in the right position. Also the flip can be set manually for corner cases.
* Cleanup of menus related to interpolate.
* Fixed some bugs and removed parameters from scene because now all are tool or operator contained.
* Some code cleanup and function renames.
This commit also includes the some codebase to future implementation of the concept `Vertex Active` that now does not exist in grease pencil.
This patch implements the list panel system D7490 for FCurve modifiers.
The UI layouts are updated to make use of subpanels and to be consistent
with the rest of the interface, and easier to understand.
See the differential revision for screenshots.
This commit also significantly cleans up the FModifier UI code, and
improves, mainly by replacing the old button creation code is with
the newer interface API using RNA. In turn there is a bit of complexity
added because each FModifier has a separate panel.
Although reordering of FModifiers was not implemented before, we get
drag and drop basically for free here, so it is also included.
As noted in some older to do tasks, FModifiers aren't evaluated
in perfect order, which may be a point of improvement for the future.
Differential Revision: https://developer.blender.org/D7997
The problem was introduced fixing task T85035.
As the frame was set again when render, if there was a time modifier, the frame was not remaped to the right frame number.
Commit rBf448ff2afe7a accidentally added menu entries that were removed.
`use_zoom_to_fit` is duplicated in menu, others were moved to overlays menu.
Remove these entries.
Reviewed By: ISS, campbellbarton
Differential Revision: https://developer.blender.org/D10453
Previously, functions would have to ask for every geometry type explicitely.
Using a vector is return type is fine. In practice this will probably never
allocate because of the small buffer optimization in vector.
If the axes are aligned in auto pivot mode then the rotation axis would be (0,0,0).
We now fall back to the x axis in this case. If that fails, we fall back to the y axis.
Differential Revision: https://developer.blender.org/D10466
Previously, the density was set per point. That implies that when a
point has a non-zero weight, points might be distributed in all
connected polygons. By specifying the density per corner, this
limitation is removed. Note, per-point density maps (such as vertex
groups) can still be used. They will be adapted to the corner domain
without loss of information.
Differential Revision: https://developer.blender.org/D10461
Instead of raising an expection a warnign is generated instead. This
fixes the issue where `['hair', 'pointcloud']` are disabled for release
builds. In the future a better solution would be to generate the context
map dynamically but this would require refactoring of the API: D9988
This fixes the issue where `['hair', 'pointcloud']` are disabled for
release builds.
In the future a better solution would be to generate the context map
dynamically but this would require refactoring of the API: D9988
Fixes T80364
Differential revision: https://developer.blender.org/D10468
This is needed to support Python 3.10's `typing.get_type_hints`,
to access the name-space used when creating the class.
Also added a docstring for execfile.
When `Preferences → Editing → New Objects → Align To` is set to `3D
Cursor`, the fluid domain added by `Object → Quick Effects → Quick
Liquid` is aligned to the 3D cursor. This shouldn't be the case, since
these aren't new objects created directly by the user.
Differential Revision: https://developer.blender.org/D10467
Crash happened in versioning code on NULL dereference in function
seq_convert_transform_crop() for Strip crop and transform
fields.
Strips created after rB1fd7b380f4cf were assumed to have crop and
transform always initialized, but this wasn't the case. This has been
fixed in 2.90, but not in versioning code.
Initialize these fields if they are not initialized already.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D10463
E.g. steps to reproduce:
* Enter Vertex Paint mode
* In the tool settings, right-click > "Edit Source"
When creating a number slider via `layout.prop(..., slider=True)`, the UI code
would reallocate the number button to be a number-slider button. That's because
we now actually have different button data-structures for these (see
e6f0b60c2e). The edit source code stored data based on the button pointers,
which didn't get updated after changing the type. The fix just adds this
updating.
"Kind" is a bit less generic than "Info" for me. Especially, it implies
that the struct does not contain the name of a specific attribute
(for me anyway).
Caused by rB85fe12071ad7.
When looking at a render pass in viewport and move the camera, there's a
"flash" effect in this AOVs test file:
{F9753476}
{F9753473}
The cause seems to be that taa_current_sample when rendering
(DRW_state_is_image_render()) is ok because it has been incremented in
EEVEE_temporal_sampling_draw but taa_current_sample is wrong when we are
not rendering.
D10375 by Ulysse Martin (youle) with clang format changes.
Reviewed By: jbakker, lichtwerk, also blessing from fclem
Differential Revision: https://developer.blender.org/D10375
This allows accessing per-point attributes on the corner domain,
which can be useful e.g. when adding per-point displacement
to per-corner uv coordinates.
Also it is required to make an upcoming patch work well, that
makes the Point Distribute node use density weights per corner
instead of per point, giving the user more precise control over
the distribution.
This makes vertex colors available in geometry nodes similar to
how uvs are available. They can be used using the attribute system.
Vertex colors are stored per corner (as are uvs, but not like vertex weights).
Ref T84297.
Differential Revision: https://developer.blender.org/D10454
Previously, when a Geometry Nodes modifier outputs a point cloud
(e.g. generated using the Point Distribute node), other modifiers
could not use that data. Now, the point cloud data is converted to
mesh vertices for such modifiers.
Ref T85281.
Differential Revision: https://developer.blender.org/D10451
All headers in the svn libraries should be
building with /W0 however MSVC 16.8/16.9
has broken this functionality making OpenVDB
emit lots of warnings.
The breakage was reported [1] in august to MS
but they still have not gotten around to
addressing the issue.
This change explicitly suppresses C4251 in the
module that emitted these warnings. As the warning
is useful in other parts of blender a localized
approach is taken rather than a global suppression.
[1] https://developercommunity.visualstudio.com/content/problem/1167590/bug.html
The integer mode still needs a random value in a 0 to 1 range, just like
floats. So slightly refactor to let the integer randomization use the
float implementation and then round to an int afterwards.
From the the opengl wiki:
> Buffer objects are associated with a program's uniform block similarly to the way that texture objects are associated with sampler uniforms.
* WITH_CPU_SSE was renamed to WITH_CPU_SIMD, and now covers both SSE and Neon.
* For macOS sse2neon.h is included as part of the precompiled libraries.
* For Linux it is enabled if the sse2neon.h header file is detected. However
this library does not have official releases and is not shipped with any Linux
distribution, so manual installation and configuration is required to get this
working.
Ref D8237, T78710
Was reported for Geometry Nodes Editor "New" button, but was true for
any modifier added via modifiers.new().
Now just add appropriate nofifier.
Maniphest Tasks: T85722
Differential Revision: https://developer.blender.org/D10450
The `material_index` attribute can adjust which material in the list
will be applied to each face of the mesh. There are two new things
about this attribute that haven't been exposed by the attribute API yet.
Each comes with limitations:
1. Integer data type: Most attribute nodes are currently written to use
float data types. This means that they can't write to this attribute
because they can't change the type of a built-in attribute.
2. Polygon domain: This is our first attribute using the polygon domain,
meaning until some of the interpolations are implemented, some
operations may not work as expected.
Currently the two nodes that work with this attribute are Attribute Fill
and Attribute Randomize.
Differential Revision: https://developer.blender.org/D10444
When primitive offsets change we need to rebuild or refit BVHs, however this
was also tagging other data as modified too late in the geometry update process.
Now ensure only the BVHs are updated.
Ref D10441
To avoid anti-aliasing artifacts on GPencil strokes that have a size smaller than 1 the thickness
is clamped and the opacity reduced. This was done in vertex shader but this had the side effect
of causing strokes that go from large to small to fade across their lengths.
**Solution**
The opacity modulation has now been moved to the fragment shader as advised by Clément Foucault.
The strokeThickness that was passed to the shader was clamped to prevent it from being too small so an additional
unclamped thickness has been passed to the fragment to calculate the opacity modulation. Alternatively I could have chosen
strokeThickness and clampedThickness but I decided against renaming the variables in the current code.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D10438
Previously, when the output of a Geometry Nodes modifier would
contain instances, those could not be accessed by other existing
modifiers (e.g. the Array modifier). That is because those modifiers
don't know about instances.
Upcoming commits will improve an this in two ways:
* Also realize instances before deform modifiers.
* Convert a point cloud in the geometry to mesh vertices so that
they can be accessed as well.
Note, making instances real can result in loosing some information
that we do not support in Geometry Nodes yet. That includes some
special builtin attributes like bevel weights.
Ref T85281.
Differential Revision: https://developer.blender.org/D10432
This makes custom mesh attributes available in Cycles. Typically,
these attributes are generated by Geometry Nodes, but they can also
be created with a Python script.
* The `subdivision` code path is not yet supported.
* This does not make vertex weights and some other builtin attributes
available in Cycles, even though they are accesible in Geometry Nodes.
All attributes generated in Geometry Nodes should be accessible though.
* In some cases memory consumption could be removed by not storing all
attributes in floats. E.g. booleans and integer attributes for which
all values are within a certain range, could be stored in less than
4 bytes per element.
Differential Revision: https://developer.blender.org/D10210
This patch has originally been written by Kévin Dietrich, thanks!
It is part of D10210.
As Brecht noted in D10210, this might not handle all cases yet.
I better solution should come soonish.
Since "Applied Modifier" was always added last, it obscured more important
messages when using the shortcut to delete modifiers. The purpose of the
report when using the shortcut was to make it clear that something
happened. Since another report does that anyway, only display the
"Applied Modifier" report if the report list length hasn't changed.
Issue introduced by my commit: rB40b7929cc040
**User-level Problem**:
The issue resulted in a full-replace upper strip with only a Z location
channel full-replacing the XY location channels of the lower stack.
replaced to default. The expected behavior is that only the Z location
channel is affected.
**Technical-level Problem**:
Before the problematic commit, fcurves were blended as they were read.
So only existing animated channels would blend. My recent commit
changed the process to read all fcurve values into an isolated
upper_snapshot then blend with the lower stack. There is no data stored
to know whether the upper snapshot channel values were sampled from
fcurves or were default values. Only those sampled from fcurves should
be blended.
**Solution**:
Added a `blend_domain` bitmask member to NlaEvalChannelSnapshot.
The blending function only blends values within the `blend_domain`.
Sampled fcurve values are now marked as within the `blend_domain`.
We also now always copy the lower snapshot to the result snapshot which
only matters when they aren't the same. Currently, it's always the same
so the change is more for future unseen cases.
Reviewed By: sybren, #animation_rigging
Differential Revision: https://developer.blender.org/D10339
Windows Ghost cursor movement was previously changed to use SendInput
because SetCursorPos sporadically allows the cursor to escape the
window. This is now reverted because SendInput causes mouse history via
GetMouseMovePointsEx to contain invalid movement history, likely due to
interaction with mouse acceleration. This resulted in popups closing
when the cursor appeared to leave their range.
This patch adds icons to the right side of nodes when they encounter a
a problem. When hovered, a tooltip displays describing the encountered
while evaluating the node.
Some examples are: attribute doesn't exist, mesh has no faces,
incorrect attribute type, etc. Exposing more messages to the system
will be an ongoing process. Multiple warnings per node are supported.
The system is implemented somewhat generically so that the basic
structure can also be used to store more information from evaluation
for the interface, like a list of available attributes.
Currently the messages are just button tooltips. They could be styled
differently in the future. Another limitation is that every instance of
a node group in a parent node tree will have the same error messages,
the "evaluation context" used to decide when to display the tooltips
must be extended to support node tree paths.
Differential Revision: https://developer.blender.org/D10290
Since the derived node tree is already build for the evaluation system,
it's simpler to pass a derived node to the params struct. This will also
allow context lookups in nested node groups for node error messages,
since the derived node has that information readily accessible.
This will allow using C++ data structures to draw node error messages.
This required removing a forward declared enum for grease pencil undo.
Compiles with clang tidy.
This commit adds support for `bl_description` and python docstrings for panels.
This is useful for pop-over panel types so they can have a label and description.
This commit also includes an example use case.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D10429
When dropping an asset somewhere, it is appended and then a drop operation is
called to actually add it to the scene based on current context. If this drop
operation fails, the appended data-block is now still in the .blend. The user
may not notice and not expect this.
Instead idea is to rollback any changes done by dropping code if the operation
fails, namely removing the appended data-block again.
Adds a new `cancel()` callback which is called if the drop operator returns
`OPERATOR_CANCELLED` to drop-boxes and a generic function to deal with assets
on drop failure.
Also removes the `free_id_on_error` property of the `NODE_OT_add_group`
operator, which was used as ad-hoc solution to get this same behavior.
Fix for T84928 .
Considering the changes , issue is resolved ( Ignoring readability issues) .
**Changes **:
- `Change in value assignment of fu/v/w :` Observing previous code , I noticed ,value assigned to them is equivalent to -0.5 ( i.e. co-ordinate of left most vertex of lattice size =1 where centre of lattice is origin ) .
- `Change in value assignment of du/v/w :` Margin ( distance ) between each division of surface along any axis is equivalent to **( (length of surface along axis ) / (no of division line - 1) )** . that's why is changed it to (default_size/unew -1) .
- ` New variable declared "default_size" :` As far as I gone through the code , I noticed values 1 < du ,fu < 1 , which indicates these values were calculated with respect to default lattice of size 1 .
- `removed pntsu/v/w != 1 check :` Following changes inside the if block worked properly for pntsu/v/w = 1 .
Reviewed By: lichtwerk, campbellbarton
Differential Revision: https://developer.blender.org/D10353
The vertex weights were actually interpolated correctly. The issue was that
vertex group names were removed from the output geometry set. We have
to keep track of these names separately from the mesh, for legacy reasons.
Vertex group names are not stored on meshes but objects instead.
In an upcoming commit I'll also move the make-instances-real functionality
to this file. This code is not essential to working with geometry sets in general,
so it makes sense to move it to a separate header.
The logic to remove one Python module before installing another
only worked in simple cases where a file replaced a file.
- Installing a single file add-on over a Python package with the same
name caused an error as the directory isn't empty.
- Removing existing module directories from the zip-file did nothing
as the directories from the zip-file that end with a slash were
compared with directories from `os.listdir` that don't.
- `module_filesystem_remove` assumed ZipFile.namelist() was a list of
files in the root of the zip-file when it's a list of all files.
While I couldn't find any bugs caused by this, it performed checks
that don't make sense, comparing files at different depths of the
file-system.
This improves stability and convergence speed of Workbench Temporal AntiAliasing.
This adds a filtering kernel (blackmann-haris, same as EEVEE/Cycles) to the
temporal antialiasing sampling. We also gather neighbor pixels since they might
end up in the pixel footprint.
We use a 1px radius for the filter window which is a bit less than the 1.5 default
of cycles and EEVEE since it does blur quite a bit more than what we have now.
Another improvement is that the filtering is now in log space which improves
AntiAliasing around highlights.
Theses improvement may not be very useful for every day case but it was an
experiment to try to make TAA usable for GPencil.
Test file used :
{F9798807}
|filtered+logspace|filtered|original|
|{F9798847}|{F9798848}|{F9798849}|
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D10414
This revert removes handling of cursor move and button press events
during Wintab's WT_PACKET event, instead storing pressure and tilt
information to be combined with Window's WM_MOUSEMOVE events.
This also reverts dynamic enabling and disabling of Wintab, dependent
on the chosen Tablet API. If the Tablet API is not explictly Windows
Ink during startup, Wintab is loaded and enabled.
Left in place is a fallback to Windows Ink when the Tablet API is set
to Automatic and no Wintab devices are present. This allows devices
with Wintab installed but not active to fallback to Windows Ink.
Using position provided by Wintab was found to have too many
regressions to include in Blender 2.93. The primary source of
regressions was tablets which mapped coordinates incorrectly on multi-
monitor and scaled displays. This resulted in an offset between what
the driver controlled Win32 cursor position and the Wintab reported
position. A special case of this included tablets set to mouse mode,
where Wintab reported absolute position while the system cursor moved
as a relative mouse with mouse acceleration.
Reloading preferences didn't update Python's `sys.path` to account
for the modified `script_directory`.
This meant the operator to load settings from a previous version
required a restart to initialize Python when this directory was set.
Updates the descriptions and labels for outliner sync in the properties
editor popover to be more clear.
Differential Revision: https://developer.blender.org/D10010
Updates the descriptions and labels for outliner sync in the properties
editor popover to be more clear.
Differential Revision: https://developer.blender.org/D10010
Blender would crash when selecting multiple keyframes while multiframe edit was
active. This was due to the active frame being NULL in some instances.
The fix checks if the active frame is not NULL.
Reviewed By: antoniov
Maniphest Tasks: T85587
Differential Revision: https://developer.blender.org/D10421
This required using a fork of Embree, newer LLVM version, unreleased ISPC
version and sse2neon directly from Git. Hopefully over time all the required
changes end up in official releases. For now we deviate from other platforms.
Based on contributions by Apple and Stefan Werner.
Ref D9527, D8237, T78710
Building NumPy from source with default options of builder
causes it to link against Accelerate framework which is buggy and
raises a warning mentioned in [2].
"RankWarning: Polyfit may be poorly conditioned"
Accelerate is deprecated with NumPy 1.20+.[1]
So either we build OpenBLAS in dependencies also and set appropriate
env variables suggested in [1] while building NumPy for it to find
OpenBLAS. Or download NumPy wheel from pip and never allow pip to
build NumPy from source while installing.
After this change, pip wheels are used for NumPy for macOS with x86_64.
[1] https://numpy.org/doc/stable/user/building.html#lapack
[2] https://github.com/numpy/numpy/issues/15947
Reviewed By: #platform_macos, sebbas
Differential Revision: https://developer.blender.org/D10368
A fix for T83187 (rBf83aa830) assumed in the overlay code of the uv editor that the object was a mesh
when it did not have to be - causing a crash.
The fix makes sure that the object is a mesh.
Reviewed By: jbakker, campbellbarton
Maniphest Tasks: T85499, T85495
Differential Revision: https://developer.blender.org/D10369
Adds `NODE_OT_add_group` operator to add a node group from a given name, and
uses that to register a node editor drop-box.
When dropping a node-group asset, the ID will be appended. This is what we do
for other ID assets too.
Should the node group insertion fail (e.g. the group is not compatible with the
current tree, as checked by the poll), the appended data-block is removed.
Differential Revision: https://developer.blender.org/D10405
Reviewed by: Jacques Lucke
This is because the node editor added a "real user" to the node group
that it displays. It was mainly added as a hack to solve issues with custom
tree types (T36024). Since we can store id references in custom properties
now, this "real user" is not really necessary anymore.
Given that we are close to a release, I'll only disable line for geometry nodes,
for which the bug has been reported.
Discussed this solution with Hans Goudey.
This reverts a part of rBd3960164163c910d5031a8f076c41b39e0a5503d.
It is not a `std::shared_ptr` but a `boost::shared_ptr`.
This could probably be fixed differently, but `NOLINT` is fine now.
Following code from D8627 this patch corrects multi threaded processing
of proxies, where a 60 sec proxy generation drops to 35 sec.
Differential Revision: https://developer.blender.org/D8659
Allow use all system threads for frame encoding/decoding. This is very
straightforward: the value of zero basically disables threading.
Change threading policy to slice when decoding frames. The reason for
this is because decoding happens frame-by-frame, so inter-frame threading
policy will not bring any speedup.
The change for threading policy to slice is less obvious and is based on
benchmark of the demo files from T78986. This gives best performance so
far.
Rendering the following file went down from 190sec down to 160sec.
https://storage.googleapis.com/institute-storage/vse_simplified_example.zip
This change makes both reading and writing faster. The animation render
is just easiest to get actual time metrics.
Differential Revision: https://developer.blender.org/D8627
USD version 21.02 includes two of the changes Blender used to patch in,
which have now been removed from `usd.diff`. Unfortunately 21.02
introduces another issue where LZ4 symbols are accidentally exported,
causing linker errors. Fortunately these symbols are only used for
resting, so I added a patch hunk that simply removes their `extern "C"`
declaration.
The LZ4 linker issue has been reported upstream at
https://github.com/PixarAnimationStudios/USD/issues/1447.
Reviewed By: sebbas, mont29
Differential Revision: https://developer.blender.org/D10367
Straight up version bump
Things of note:
They started using API calls only available in windows 8, however given
the Python 3.9 update will forcibly bump us to 8.1+ anyhow this is not
an issue.
Will require some minor tweaks to platform_win32.cmake after adding the
libs to svn which are not included in this diff so this diff can land
without having to have the libs in place yet.
Reviewed By: sebbas, sybren
Differential Revision: https://developer.blender.org/D10349
Straight forward version bump, some of the variables to detect a static
OpenEXR changed and the folder structure seemingly changed a little
requiring updates to the diff
Reviewed By: sebbas, sybren
Differential Revision: https://developer.blender.org/D10340
Version bump + no longer using Boost.
Building Alembic with Boost gave compiler errors, and having one less
inter-dependency is good as well.
Reviewed By: sebbas, sybren
Differential Revision: https://developer.blender.org/D10329
Straight forward version bump.
2020U2 is significantly louder in the deprecated header usage warning
department, we should probably see if we need to act on this: P1949
Differential Revision: https://developer.blender.org/D10359
Previously `mesh.attributes.new(...)` would return a generic attribute that
one could not do much with. Now it returns refined attributes like `FloatAttribute`.
Add a boundary check, avoiding access past actual data.
Ideally would need to report error to the user somehow,
but it doesn't seem to be easy to do.
This is a minimal safe patch. The proper complete fix is
being worked on by Jesse.
Differential Revision: https://developer.blender.org/D10357
The inset operator would display the inset thickness and depth as
Blender units during transform. This meant that when the scene units
were set to something different than meters, the display value would
give different results than entering the same number using the value
input. (Similar to D10325)
The fix makes sure that the numbers are always displayed in the correct
scene units.
Reviewed By: campbellbarton
Maniphest Tasks: T85488
Differential Revision: https://developer.blender.org/D10366
Cycles has supported path-traced subsurface scattering for a while, but while it's
more accurate than other approaches, the increase in noise makes it an expensive option.
To improve this, this patch implements Dwivedi guiding, a technique that is based on
zero-variance random walk theory from particle physics and helps to produce shorter
random walks with more consistent throughput.
The idea behind this is that in non-white materials, each scattering event inside the
medium reduces the path throughput. Therefore, the darker the material is, the lower the
contribution of paths that travel far from the origin is.
In order to reduce variance, Dwivedi guiding uses modified direction and distance sampling
functions that favor paths which go back towards the medium interface.
By carefully selecting these sampling distributions, variance can be greatly reduced, and
as a neat side effect shorter paths are produced, which speeds up the process.
One limitation of just blindly applying this is that the guiding is derived from the
assumption of a medium that covers an infinite half-space. Therefore, at corners or thin
geometry where this does not hold, the algorithm might lead to fireflies.
To avoid this, the implementation here uses MIS to combine the classic and guided sampling.
Since each of those works on one of the three color channels, the final estimator combines
six sampling techniques. This results in some unintuitive math, but I tried to structure
it in a way that makes some sense.
Another improvement is that in areas where the other side of the mesh is close (e.g. ears),
the algorithm has a chance to switch to guiding towards the other side. This chance is based
on how deep the random walk is inside the object, and once again MIS is applied to the
decision, giving a total of nine techniques.
Combining all this, the noise of path-traced subsurface scattering is reduced significantly.
In my testing with the Rain character model and a simple lighting setup, the path-traced
SSS is now actually less noisy than the Christensen-Burley approximation at same render time
while of course still being significantly more realistic.
Differential Revision: https://developer.blender.org/D9932
This resolves build error with Py3.9x, use meson build system
since autoconf/automake are no longer supported.
This adds ninja & meson as dependencies for Linux.
Reviewed By: brecht, sybren
Ref D10282
Getting an "ouput" attribute is equivalent to creating an attribute and
then getting a write attribute. Replace the latter with the former for
consistency with other code, and to decrease the used surface area
of the attribute API to hopefully facilitate future cleanup.
Corrects approximately 36 spelling errors in source variable names.
Differential Revision: https://developer.blender.org/D10347
Reviewed by Hans Goudey
This changes the roughness mapping to better utilize the mip chain resolution.
This improves glossy reflections with small roughness.
Lightcache version bumped because old data does not have the same roughness
mapping and cannot be used.
This modifies the principled BSDF and the Glass BSDF which now
have better fit to multiscatter GGX.
Code to generate the LUT have been updated and can run at runtime.
The refraction LUT has been changed to have the critical angle always
centered around one pixel so that interpolation can be mitigated.
Offline LUT data will be updated in another commit
This simplify the BTDF retreival removing the manual clean cut at
low roughness. This maximize the precision of the LUT by scalling
the sides by the critical angle.
I also touched the ior > 1.0 approximation to be smoother.
Also incluse some cleanup of bsdf_sampling.glsl
This refactor was needed for some reasons:
- closure_lit_lib.glsl was unreadable and could not be easily extended to use new features.
- It was generating ~5K LOC for any shader. Slowing down compilation.
- Some calculations were incorrect and BSDF/Closure code had lots of workaround/hacks.
What this refactor does:
- Add some macros to define the light object loops / eval.
- Clear separation between each closures which now have separate files. Each closure implements the eval functions.
- Make principled BSDF a bit more correct in some cases (specular coloring, mix between glass and opaque).
- The BSDF term are applied outside of the eval function and on the whole lighting (was separated for lights before).
- Make light iteration last to avoid carrying more data than needed.
- Makes sure that all inputs are within correct ranges before evaluating the closures (use `safe_normalize` on normals).
- Making each BSDF isolated means that we might carry duplicated data (normals for instance) but this should be optimized by compilers.
- Makes Translucent BSDF its own closure type to avoid having to disable raytraced shadows using hacks.
- Separate transmission roughness is now working on Principled BSDF.
- Makes principled shader variations using constants. Removing a lot of duplicated code. This needed `const` keyword detection in `gpu_material_library.c`.
- SSR/SSS masking and data loading is a bit more consistent and defined outside of closure eval. The loading functions will act as accumulator if the lighting is not to be separated.
- SSR pass now do a full deferred lighting evaluation, including lights, in order to avoid interference with the closure eval code. However, it seems that the cost of having a global SSR toggle uniform is making the surface shader more expensive (which is already the case, by the way).
- Principle fully black specular tint now returns black instead of white.
- This fixed some artifact issue on my AMD computer on normal surfaces (which might have been some uninitialized variables).
- This touched the Ambient Occlusion because it needs to be evaluated for each closure. But to avoid the cost of this, we use another approach to just pass the result of the occlusion on interpolated normals and modify it using the bent normal for each Closure. This tends to reduce shadowing. I'm still looking into improving this but this is out of the scope of this patch.
- Performance might be a bit worse with this patch since it is more oriented towards code modularity. But not by a lot.
Render tests needs to be updated after this.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D10390
# Conflicts:
# source/blender/draw/engines/eevee/eevee_shaders.c
# source/blender/draw/engines/eevee/shaders/common_utiltex_lib.glsl
# source/blender/draw/intern/shaders/common_math_lib.glsl
Removes values from various Outliner context menu enums that were unused.
Many of these had been commented out for years. Also deletes some
unused code related to the removed enums. No functional changes.
A few related improvements to the three functions:
- Reduce variable scope
- Use for loops instead of while loops
- Use const, bool instead of int
- Generally make logic easier to read
This is a complete refactor over the old system. The goal was to increase quality
first and then have something more flexible and optimised.
|{F9603145} | {F9603142}|{F9603147}|
This fixes issues we had with the old system which were:
- Too much overdraw (low performance).
- Not enough precision in render targets (hugly color banding/drifting).
- Poor resolution near in-focus regions.
- Wrong support of orthographic views.
- Missing alpha support in viewport.
- Missing bokeh shape inversion on foreground field.
- Issues on some GPUs. (see T72489) (But I'm sure this one will have other issues as well heh...)
- Fix T81092
I chose Unreal's Diaphragm DOF as a reference / goal implementation.
It is well described in the presentation "A Life of a Bokeh" by Guillaume Abadie.
You can check about it here https://epicgames.ent.box.com/s/s86j70iamxvsuu6j35pilypficznec04
Along side the main implementation we provide a way to increase the quality by jittering the
camera position for each sample (the ones specified under the Sampling tab).
The jittering is dividing the actual post processing dof radius so that it fills the undersampling.
The user can still add more overblur to have a noiseless image, but reducing bokeh shape sharpness.
Effect of overblur (left without, right with):
| {F9603122} | {F9603123}|
The actual implementation differs a bit:
- Foreground gather implementation uses the same "ring binning" accumulator as background
but uses a custom occlusion method. This gives the problem of inflating the foreground elements
when they are over background or in-focus regions.
This is was a hard decision but this was preferable to the other method that was giving poor
opacity masks for foreground and had other more noticeable issues. Do note it is possible
to improve this part in the future if a better alternative is found.
- Use occlusion texture for foreground. Presentation says it wasn't really needed for them.
- The TAA stabilisation pass is replace by a simple neighborhood clamping at the reduce copy
stage for simplicity.
- We don't do a brute-force in-focus separate gather pass. Instead we just do the brute force
pass during resolve. Using the separate pass could be a future optimization if needed but
might give less precise results.
- We don't use compute shaders at all so shader branching might not be optimal. But performance
is still way better than our previous implementation.
- We mainly rely on density change to fix all undersampling issues even for foreground (which
is something the reference implementation is not doing strangely).
Remaining issues (not considered blocking for me):
- Slight defocus stability: Due to slight defocus bruteforce gather using the bare scene color,
highlights are dilated and make convergence quite slow or imposible when using jittered DOF
(or gives )
- ~~Slight defocus inflating: There seems to be a 1px inflation discontinuity of the slight focus
convolution compared to the half resolution. This is not really noticeable if using jittered
camera.~~ Fixed
- Foreground occlusion approximation is a bit glitchy and gives incorrect result if the
a defocus foreground element overlaps a farther foreground element. Note that this is easily
mitigated using the jittered camera position.
|{F9603114}|{F9603115}|{F9603116}|
- Foreground is inflating, not revealing background. However this avoids some other bugs too
as discussed previously. Also mitigated with jittered camera position.
|{F9603130}|{F9603129}|
- Sensor vertical fit is still broken (does not match cycles).
- Scattred bokeh shapes can be a bit strange at polygon vertices. This is due to the distance field
stored in the Bokeh LUT which is not rounded at the edges. This is barely noticeable if the
shape does not rotate.
- ~~Sampling pattern of the jittered camera position is suboptimal. Could try something like hammersley
or poisson disc distribution.~~Used hexaweb sampling pattern which is not random but has better
stability and overall coverage.
- Very large bokeh (> 300 px) can exhibit undersampling artifact in gather pass and quite a bit of
bleeding. But at this size it is preferable to use jittered camera position.
Codewise the changes are pretty much self contained and each pass are well documented.
However the whole pipeline is quite complex to understand from bird's-eye view.
Notes:
- There is the possibility of using arbitrary bokeh texture with this implementation.
However implementation is a bit involved.
- Gathering max sample count is hardcoded to avoid to deal with shader variations. The actual
max sample count is already quite high but samples are not evenly distributed due to the
ring binning method.
- While this implementation does not need 32bit/channel textures to render correctly it does use
many other textures so actual VRAM usage is higher than previous method for viewport but less
for render. Textures are reused to avoid many allocations.
- Bokeh LUT computation is fast and done for each redraw because it can be animated. Also the
texture can be shared with other viewport with different camera settings.
This commit adds a drop-down to the attribute randomize node to support
a few operations on the values of existing attributes: "Replace/Create"
(the existing behavior), "Add", "Subtract", and "Multiply".
At this point, the operations are limited by what is simple to implement.
More could be added in the future, but there isn't a strong use case
for more complex operations anyway, and a second math node can be used.
Differential Revision: https://developer.blender.org/D10269
Currently every attribute node assumes that the attribute exists on the
"points" domain, so it generally isn't possible to work with attributes
on other domains like edges, polygons, and corners.
This commit adds a heuristic to each attribute node to determine the
correct domain for the result attribute. In general, it works like this:
- If the output attribute already exists, use that domain.
- Otherwise, use the highest priority domain of the input attributes.
- If none of the inputs are attributes, use the default domain (points).
For the implementation I abstracted the check a bit, but in each
node has a slightly different situation, so we end up with slightly
different `get_result_domain` functions in each node. I think this makes
sense, it keeps the code flexible and more easily understandable.
Note that we might eventually want to expose a domain drop-down to some
of the nodes. But that will be a separate discussion; this commit focuses
on making a more useful choice automatically.
Differential Revision: https://developer.blender.org/D10389
Removal of Win32 code that allows background windows to receive raw input.
Differential Revision: https://developer.blender.org/D10408
Reviewed by Brecht Van Lommel
Ref T84819
Build System
============
This is an API breaking new version, and the updated code only builds with
OpenColorIO 2.0 and later. Adding backwards compatibility was too complicated.
* Tinyxml was replaced with Expat, adding a new dependency.
* Yaml-cpp is now built as a dependency on Unix, as was already done on Windows.
* Removed currently unused LCMS code.
* Pystring remains built as part of OCIO itself, since it has no good build system.
* Linux and macOS check for the OpenColorIO verison, and disable it if too old.
Ref D10270
Processors and Transforms
=========================
CPU processors now need to be created to do CPU processing. These are cached
internally, but the cache lookup is not fast enough to execute per pixel or
texture sample, so for performance these are now also exposed in the C API.
The C API for transforms will no longer be needed afer all changes, so remove
it to simplify the API and fallback implementation.
Ref D10271
Display Transforms
==================
Needs a bit more manual work constructing the transform. LegacyViewingPipeline
could also have been used, but isn't really any simpler and since it's legacy
we better not rely on it.
We moved more logic into the opencolorio module, to simplify the API. There is
no need to wrap a dozen functions just to be able to do this in C rather than C++.
It's also tightly coupled to the GPU shader logic, and so should be in the same
module.
Ref D10271
GPU Display Shader
==================
To avoid baking exposure and gamma into the GLSL shader and requiring slow
recompiles when tweaking, we manually apply them in the shader. This leads
to some logic duplicaton between the CPU and GPU display processor, but it
seems unavoidable.
Caching was also changed. Previously this was done both on the imbuf and
opencolorio module levels. Now it's all done in the opencolorio module by
simply matching color space names. We no longer use cacheIDs from OpenColorIO
since computing them is expensive, and they are unlikely to match now that
more is baked into the shader code.
Shaders can now use multiple 2D textures, 3D textures and uniforms, rather
than a single 3D texture. So allocating and binding those adds some code.
Color space conversions for blending with overlays is now hardcoded in the
shader. This was using harcoded numbers anyway, if this every becomes a
general OpenColorIO transform it can be changed, but for now there is no
point to add code complexity.
Ref D10273
CIE XYZ
=======
We need standard CIE XYZ values for rendering effects like blackbody emission.
The relation to the scene linear role is based on OpenColorIO configuration.
In OpenColorIO 2.0 configs roles can no longer have the same name as color
spaces, which means our XYZ role and colorspace in the configuration give an
error.
Instead use the new standard aces_interchange role, which relates scene linear
to a known scene referred color space. Compatibility with the old XYZ role is
preserved, if the configuration file has no conflicting names.
Also includes a non-functional change to the configuraton file to use an
XYZ-to-ACES matrix instead of REC709-to-ACES, makes debugging a little easier
since the matrix is the same one we have in the code now and that is also
found easily in the ACES specs.
Ref D10274
Currently moving or changing an object references in a node modifier's
node group does not trigger re-evaluation. Because there is no collection
relation in the dependency graph, we must add the relation to all objects
in the collection individually.
This commit makes the geometry output of the collection info usable.
The output is the geometry of a collection instance, but this commit
adds a utility to convert the instances to real geometry, used in the
background whenever it is needed, like copy on write.
The recursive nature of the "realize instances" code is essential,
because collection instances in the `InstancesComponent`, might have no
geometry sets of their own containing even more collection instances,
which might then contain object instances, etc.
Another consideration is that currently, every single instance contains
a reference to its data. This is inefficient since most of the time
there are many locations and only a few sets of unique data. So this
commit adds a `GeometryInstanceGroup` to support this future optimization.
The API for instances returns a vector of `GeometryInstanceGroup`.
This may be less efficient when there are many instances, but it makes
more complicated operations like point distribution that need to iterate
over input geometry multiple times much simpler.
Any code that needs to change data, like most of the attribute nodes,
can simply call `geometry_set_realize_instances(geometry_set)`,
which will move any geometry in the `InstancesComponent` to new "real"
geometry components.
Many nodes can support read-only access to instances in order to avoid
making them real, this will be addressed where needed in the near future.
Instances from the existing "dupli" system are not supported yet.
Differential Revision: https://developer.blender.org/D10327
Ids stored in the `id` attribute cannot be assumed to be unique. While they
might be unique in some cases, this is not something that can be guaranteed
in general. For some use cases (e.g. generating "stable randomness" on points)
uniqueness is not important. To support features like motion blur, unique ids
are important though.
This patch implements a simple algorithm that turns non-unique ids into
unique ones. It might fail to do so under very unlikely circumstances, in
which it returns non-unique ids instead of possibly going into an endless
loop.
Here are some requirements I set for the algorithm:
* Ids that are unique already, must not be changed.
* The same input should generate the same output.
* Handle cases when all ids are different and when all ids are the same
equally well (in expected linear time).
* Small changes in the input id array should ideally only have a small
impact on the output id array.
The reported bug happened because cycles found multiple objects with
the same id and thought that it was a single object that moved on every
check.
Differential Revision: https://developer.blender.org/D10402
The problem was the stroke was reproject flat to view if the axis was View. Now, if the operation is using depth, the stroke is not reprojected.
Related to T85082
Baking vertex colors per-corner leads to unwanted discontinuities when there is
sampling noise, for example in ambient occlusion or with a bevel shader node for
normals. For this reason the code used to always average results per-vertex.
However when using split normals, multiple materials or UV islands, we do want to
preserve discontinuities. So now bake per corner, but make sure the sampling seed
is shared for vertices.
Fix T85550: vertex color baking crash with split normals, Ref D10399
Fix T84663: vertex color baking blending at UV seams
Create zero-byte manual page files `nasm.1` and `ndisasm.1` such that
nasm's `make install` step succeeds.
Installing nasm requires that its manual pages are built. This requires
local packages `asciidoc` and `xmlto` to be installed.
Not only does `asciidoc` pull in 110 MB of packages (itself +
dependencies), there is also no need for these manual pages. Nasm is
just used for building other dependencies, and not even part of our
precompiled libraries in SVN.
Reviewed By: sebbas
Differential Revision: https://developer.blender.org/D10396
The nodes update function geo_node_volume_to_mesh_update would not run
if it is not the very first node in the tree.
If the update function is not run, there are sockets not cleared from
the SOCK_UNAVAIL flag (but this needs to be done -- these get available
depending on the chosen mode).
Havent tracked down why this was actually updating when it was the first
node in the tree, but now make sure we always get an update by specifing
an appropriate RNA update callback for the property.
Maniphest Tasks: T85558
Differential Revision: https://developer.blender.org/D10403
This patch will share the AOV settings between Cycles and Eevee.
It enable using the AOV name conflict detection of Blender. This
means that unlike how Cycles used to work it isn't possible to add an
AOV with a similar name. Conflicts with internal render pass names will
be indicated with an Warning icon.
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D9774
This makes it so that normals are tagged dirty whenever the position
attribute is requested for writing. This seems like a good default. If the
calling code is aware of normals, it could untag normals when they are
not changed by the operation.
Differential Revision: https://developer.blender.org/D10397
In 2.81 there was a change to increase the performance of viewport
animation rendering. This change would perform the color management on the
GPU if the only 8bit was needed. This saved CPU cycles and data
transfer.
The issue is that in the image editor or when saving the image the CM
will be reapplied. Although the speed is desired, exporting the actual
colors has more priority.
In the ticket there is an analysis that shows that shows that this fix
is the correct short term step to take. It would be better that the
render result is aware of the color space of its buffers so the applying
color management could be skipped when saving to disk or drawing in the
image editor.
The issue with this change is the performance penalty it has.
Reviewed By: Brecht van Lommel
Maniphest Tasks: T79999
Differential Revision: https://developer.blender.org/D10371
In 2.81 there was a change to increase the performance of viewport
animation rendering. This change would perform the color management on the
GPU if the only 8bit was needed. This saved CPU cycles and data
transfer.
The issue is that in the image editor or when saving the image the CM
will be reapplied. Although the speed is desired, exporting the actual
colors has more priority.
In the ticket there is an analysis that shows that shows that this fix
is the correct short term step to take. It would be better that the
render result is aware of the color space of its buffers so the applying
color management could be skipped when saving to disk or drawing in the
image editor.
The issue with this change is the performance penalty it has.
Reviewed By: Brecht van Lommel
Maniphest Tasks: T79999
Differential Revision: https://developer.blender.org/D10371
The previous behavior meant that changing an objects visibility
effectively changed the current mode - which missed necessary
updates for the tool-system (for example).
There was already a check for edit-mode, now expected to all modes.
This makes the test-case described in T83013 work as expected.
Adds a new property called "Confirm On Release" that does what it says,
confirm the action without having to do left-click or to press any other
extra-key which concludes in a more dynamic and efficient way of changing
brush size or strength for example, especially for tablet users.
Reviewed By: campbellbarton
Ref D10233
- Move non-blender build targets into their own section.
- Expand 'make help' text, noting a local 'make deps' overrides.
- Note where the spell checkers word-list is maintained.
- Note on why sqlite is built without 'tcl'.
Use Python 3.8's API for setting the initial configuration.
This replaces a mix of our logic and direct calls to the Python API
and has no user visible changes.
Using the Python API makes the logic easier to follow and provides
utilities such as `PyConfig_SetBytesArgv`
that wasn't available in previous releases.
Note that this uses Python's utf8/wchar_t conversions,
which used to cause problems (see T31506).
Since `Py_UTF8Mode` was set, the systems locale isn't used for decoding,
allowing us to use Python's utility functions that call
`Py_DecodeLocale` internally.
Ref D10382
MeshTest now compares selection between evaluated mesh and expected mesh. This way, we can test more operators
such as `faces_select_linked_flat`
Note: selection comparison intentionally does not happen in BKE_mesh_cmp() on C side but rather on Python side, because
selection is independent of mesh generation.
Reviewed By: calra, mont29
Differential Revision: https://developer.blender.org/D10279
Paths and names of system packages-installed libhpdf on Debian (and
probably its derived distributions?) are slightly different than what
was given to CMake finding script.
Print number of total tests with each test to show how many tests have been executed and how many are left.
Example: `Running test 27/36: PlaneFaceSplitByEdges...`
Reviewed By: calra, mont29
Differential Revision: https://developer.blender.org/D10278
Tests are not identified with indexes, so no need to maintain comments with indexes anymore
Reviewed By: calra, mont29
Differential Revision: https://developer.blender.org/D10277
Having a vertex group in a mesh slowed down unrelated operations
such as selection.
De-duplicating custom-data arrays for layers that contain pointers
can become slow without any benefit as the content never matches.
Use full copies when storing custom-data for edit-mesh undo.
Caused by rB0f95f51361d7.
Similar to T85515, T84717 and their related fixes.
In this case, add missing shading notifier as in rB9274bd457a25.
Maniphest Tasks: T85543
Differential Revision: https://developer.blender.org/D10395
This crash is caused by accessing object data in the kernel at an out of bound index from a deleted instance.
Cycles represents instances as Object nodes sharing the same Geometry node, so we need to tag the GeometryManager for an update if some objects are added or removed as no geometry might have been added or removed in order to properly update the BVH and its associated data arrays.
Regression caused by rBbbe6d4492823.
It's not necessary to check if the link has to be removed,
if it was removed already.
This regression was caused by rB8f707a72e81833bb835324ddc635b29dfbe87a9f.
This commit makes links connected to multi-input sockets spread verticaly
along the socket. Sockets grow if more links are connected and the node
layout updates accordingly. Links are sorted by their incoming angle
to avoid crossing links. Also, link picking is updated to work with
spread links and bezier links.
Currently the multi-input sockets are used in the join geometry node.
The mutli-input sockets look like a vertical rounded rectangle.
Currently they do not support the other custom socket shapes.
Reviewed By Hans Goudey, with cleanup and additional edits
Differential Revision: https://developer.blender.org/D10181
This updates the join node to use the new multi-input socket from D10067.
The change just requires slightly changing the arguments of the exec
function, and changing the socket input list.
Note that this commit does not contain the UI changes, it only allows for
more input links, and combines the two sockets into one. The UI changes
will come next.
Reviewed By: Hans Goudey
Differential Revision: https://developer.blender.org/D10069
The triangle overlap test failed for exactly overlapping triangles.
When none of the segments intersect, testing a if a single corner
is inside the other triangle fails when the triangles share UV
coordinates.
Resolve by comparing the triangle centers.
* USD and OpenVDB headers use deprecated TBB headers, suppress all deprecation
warnings there since we have no control over them.
* For our own TBB includes, use the individual headers rather than the tbb.h that
includes everything to avoid warnings, rather than suppressing all.
This is in anticipation of the TBB 2020 upgrade in D10359. Ref D10361.
Currently, `createTransData` is doing much more than the name implies.
This commit makes it clearer through smaller and more specific functions
what the real purpose of that function.
For the debug version of cython pip was trying to link
against the release version of python for some strange
reason. Passing some flags to explicitly target the
debug version fixes the issue.
Given other platforms do not have different builds for
debug/release this is not an issue there.
This removes indentations from if statements by converting them to early
returns and continue.
Most of the code of brushes and tools has loops with a full indented
body inside of an if, which was also copied into some of the new tools.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10333
This potentially could fix some missed cases in dependency tagging (when
dealing with overrides hierarchies), since relying on tag in ID itself
is not a good idea to check whether an ID has been propcessed or not
(exterior code may have forced that tag on some IDs e.g., which would
prevent them from ever being processed properly).
The local orientation chosen was that of the active object, but as
confirmed in other parts of the code, the orientation of the selected
Bone has priority.
Caused by rB5b34d11b55e0.
Above commit restored the view matrices in ED_view3d_draw_offscreen
_before_ they can be stored in the ImBuff (see ED_view3d_draw_offscreen
/ texture_paint_image_from_view_exec).
Now make restoring the view matrices optional and dont do this in case
of reprojection, so the used matrices can still be saved in the ImBuff
later.
Reviewed By: campbellbarton
Maniphest Tasks: T85395
Differential Revision: https://developer.blender.org/D10331
Fixes an issue in a node setup with the point separate node, where muting
a node that does nothing breaks the operation, resulting in the point
separate not copying the position attrbute to either result.
The fix is straightfoward, it looks just like a typo.
Differential Revision: https://developer.blender.org/D10379
After {rBa0867f05a48e2017a}, it is no longer necessary to pad
structs with 1 and 2 byte sizes. Most of these are geometry node
structs, where we've been avoiding using `node.custom1`.
I only found two others, the freestyle flags in custom data DNA.
Differential Revision: https://developer.blender.org/D10335
This fixes two issues that were preveting normal orientation for working:
- The translation of component of the object matrix should not be
considered when converting a normal to world space.
- Whe using cursor for depth, the depth for the shape should be taken
directly from the cursor (which is already unprojected and updated)
instead of from the brush, which may have not been updated.
Reviewed By: dbystedt, JacquesLucke
Differential Revision: https://developer.blender.org/D10231
Simplification of window creation code to allow greater flexibility.
Differential Revision: https://developer.blender.org/D10311
Reviewed by Brecht Van Lommel
The texture paint mode was accidentally removed from the list
Reviewed By: JacquesLucke
Maniphest Tasks: T83047
Differential Revision: https://developer.blender.org/D10216
The thumb brush was updating the area normal per brush sample, which was
making unstable sampled normals for setting the displacement direction
when the vertices are moved too much from their original positions.
Now it always uses the original normal except when using anchored
strokes. In those cases, the normal always needs to be updated.
Reviewed By: JacquesLucke
Maniphest Tasks: T85079
Differential Revision: https://developer.blender.org/D10214
The following packages also have received updates:
- IDNA 2.10
- CHARDET 4.0.0
- URLLIB3 1.26.3
- CERTIFI 2020.12.5
- REQUESTS 2.25.1
- NUMPY 1.19.5
numpy has gained a hard dependency on cython:
- CYTHON 0.29.21
Notes:
- This only updates the build environment files,
once these are built, Blender can default to Python 3.9.
- The 'm' suffix for Python binaries/libs has been removed.
- The macOS patch in Python 3.7 is has been removed.
Reviewed By: sybren, campbellbarton, sebbas
Ref D10257
The span fill was in multithreaded code, so calculated values were
sometimes reset. The fix is to move FLT_MAX fill outside of parallel_for.
Differential Revision: https://developer.blender.org/D10378
This potentially could fix some missed cases in dependency tagging (when
dealing with overrides hierarchies), since relying on tag in ID itself
is not a good idea to check whether an ID has been propcessed or not
(exterior code may have forced that tag on some IDs e.g., which would
prevent them from ever being processed properly).
The render visibility column in the outliner should be enabled by
default. This change makes it more obvious which objects will be
rendered which can be misleading when only viewport visibility toggles
are shown by default. This commit enables the render visibility column
in all existing and new Outliner editors.
Differential Revision: https://developer.blender.org/D10365
Invalid override properties ( i.e. invalid RNA paths) are not strictly
speaking errors, many things can lead to that situation. Just ignore and
skip those cases.
These are similar to the regular "Combine XYZ" and "Separate XYZ" nodes,
but they work on attributes. They will make it easier to switch between
vector attributes and float attributes.
Differential Revision: https://developer.blender.org/D10308
The repository information for cloning the OpenXR repository, rather than just
downloading the source archive, was outdated.
* Use the OpenXR-SDK repository link, not the OpenXR-SDK-Source one. Only the
former is needed, it contains pregenerated files with minimum dependencies.
The latter contains additional tools and the un-generated source files.
* Update the commit hash to the version we currently use, 1.0.14 (was 1.0.6).
Differential Revision: https://developer.blender.org/D10373
Reviewed by: Bastien Montagne
Properly fully extract
`lib_override_hierarchy_dependencies_recursive_tag` from
`lib_override_linked_group_tag`.
Was supposed to be that way already (see comment of
`lib_override_linked_group_tag`), for some reasons this case was missed.
As shown on the T85383, attempts are made to edit the precision mode key.
But that key was hardcoded.
That key now appears among the custom modal keymap items.
Add a bar between keyframes to indicate that keyframe is still used. This is part of a change to make the rec button be used by gpencil.
Example:
Before:
{F9592704}
After:
{F9592702}
Reviewed By: #user_interface, #grease_pencil, pepeland, Severin
Maniphest Tasks: T85463
Differential Revision: https://developer.blender.org/D10179
This commit is a refactor of the fill tool to solve several problems we had since the first version of the tool.
Changes:
* The filling speed has been improved for each step of the process with the optimization of each algorithm/function.
* New `AutoFit` option to fill areas outside of the viewport. When enable, the total size of the frame is calculated to fit the filling area.
* New support multiframe filling. Now it is possible to fill multiple similar frames in one go.
* New `Stroke Extension` option to create temporary closing strokes. These strokes can be displayed and adjusted dynamically using wheel mouse or PageUp/Down keys.
* Parameter `Resolution` now is named `Precision` and has been moved to topbar.
* `Resolution` now has decimals and can be lower than 1 to allow quick filling in storyboarding workflows. Maximum value has been set as 5.
* Parameter `Simplify` has been moved to Advanced panel.
* Improved fill outline detection. In some cases, the outline penetrated the area to be filled with unexpected results.
* Fixes some corner case bugs with infinite loops.
As a result of this refactor, also these new functionalities has been added.
* New support for multiframe in `Draw` mode. Any drawing in active frame is duplicated to all selected frame.
* New multiframe display mode. Keyframes before or after of the active frame are displayed using onion colors. This can be disable using Onion overlay options.
Since GPencil changes depending on libharu may be committed to master
before SVN libraries for all platforms are in place, avoid build issues.
Extension of D9928.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D10280
This patch adds support for accessing corner attributes on the point domain.
The immediate benefit of this is that now (interpolated) uv coordinates are
available on points without having to use the Point Distribute node.
This is also very useful for parts of T84297, because once we have vertex
colors, those will also be available on points, even though they are stored
per corner.
Differential Revision: https://developer.blender.org/D10305
Goals:
* Clarify the distinction between builtin and other attributes at the code level.
* Reduce number of places that need to be modified to add more builtin attributes.
* Reduce number of virtual methods that need to be implemented by e.g. `MeshComponent`.
To achieve these goals, this patch implements the concept of "attribute providers".
An attribute provider knows how to give access to attributes on a geometry component.
Each geometry component can have multiple attribute providers, whereby each provider
manages an different set of attributes.
The separation of builtin and other attributes is now done at the attribute provider level.
There are two types of attribute providers. One for builtin attributes and one for all others.
This refactor also helps with T84297.
Differential Revision: https://developer.blender.org/D10341
This patch will show textures in the image editor with the maximum
available resolution determined by the GPU Hardware/Driver.
Currently the size is limited by the user preference texture size limit.
An image user can set the `IMA_SHOW_MAX_RESOLUTION` flag to request
gpu textures in the max supported resolution. When this flag isn't
set the gpu texture is limited by the user preference setting.
When the gl resolution limit is disabled the GPU texture is always
created for the max supported resolution.
Reviewed By: Clément Foucault
Maniphest Tasks: T81206
Differential Revision: https://developer.blender.org/D9160
This avoids adding DNA_ID.h into other headers, recently changed in
cfa48c84d0
Note that other enums could be moved too, this is a smaller change
to avoid indirectly including DNA_ID.h in many places.
This commit moves the property layout callbacks for node types to their
implementation files from `drawnode.c`. This was proposed a while ago in
T75724.
**Benefits**
- Fewer files need to be changed when adding a new node.
- Makes it possible to reuse functions from the node's implementation
in the layout code.
- Except for RNA, all of the node "inputs" are in the same place.
- Code gets shorter overall, avoids the large switch statements.
**Downsides**
- Requires including two UI headers.
- Requires adding an editors dependency to the nodes folder.
This commit only changes function nodes and geometry nodes, more can be
moved later.
Differential Revision: https://developer.blender.org/D10352
The header files in freestyle utilize the using-directive at the global
file scope. This is a bad practice as it pollutes the global name space
causing possible ambiguous reference compilation errors. In particular,
the DNA files that are included by freestyle will cause those ambiguous
reference errors when the developers adds a DNA member with a type name
that also exist in the Freestyle name space, such as Curve and possibly
others.
This patch does the minimal work needed to resolve that by moving the
using-directives from the headers into the corresponding translation
units.
Reviewed By: Brecht
Differential Revision: https://developer.blender.org/D10351
The logic to ensure a valid region state was too aggressive in setting the
region hiding. It would just always update it based on the operator's
`hide_props_region` option, not only when file browser was newly opened.
It's more selective now.
Essentially, `lib_link_all` would perform some post-processing over data
in given `bmain` that **may** fail when not all data from all libraries
has been properly loaded yet.
This happens when `lib_link_all` is called from `read_libraries`, where
the bmains are split by libraries.
Now those post-processing is put into its own utils function, which
asserts that it is only called on a merged bmain.
Bonus point, this will avoid re-runing those not-so-cheap operations
more than once on the same data.
Reproducible in r1442 of Sprite repository when opening
`pro/animation_test/rex/performance/rex_crowdcamping/rex_crowdcamping.lighting.blend`
NOTE: Not so sure why we have to call `lib_link_all` several times (once
for each library, and then once on the whole merged bmain, including
local IDs then). So that it can get called for libs while we still have
that specific .blend file handle around?
In any case, the overhead here is minimal since we do ensure a data-block is
never lib-linked more than once, so this is not a serious concern right now.
Differential Revision: https://developer.blender.org/D10307
This patch will show textures in the image editor with the maximum
available resolution determined by the GPU Hardware/Driver.
Currently the size is limited by the user preference texture size limit.
An image user can set the `IMA_SHOW_MAX_RESOLUTION` flag to request
gpu textures in the max supported resolution. When this flag isn't
set the gpu texture is limited by the user preference setting.
When the gl resolution limit is disabled the GPU texture is always
created for the max supported resolution.
Reviewed By: Clément Foucault
Maniphest Tasks: T81206
Differential Revision: https://developer.blender.org/D9160
The changes are:
- Split conversion of the texture space data to its own file.
- Skip adding keyframes with AutoKeyframes.
- Skip recalculation of the trasform dependencies between objects.
- Skip `special_aftertrans_update_...`.
No real user functional changes
The code takes many turns to get a suitable "target" for the snap to grid.
Perhaps there were other reasons awaited for `transformCenter_from_type`
and `TransCenterData center_cache[5]`.
But since nothing is defined, it is better to simplify the code.
No user functional changes
Simple change that shows all the enums used in the transform code and helps
to better understand the role of the members of the struct TransInfo.
It also allows the IDE to show the name of the value represented by the
member instead of a number that needs to be consulted.
Differential Revision: https://developer.blender.org/D10312
When clamp is enabled, it should clamp between the output min and max
and not between 0 and 1.
Differential Revision: https://developer.blender.org/D10324
`seq_effect_speed_get_strip_content_length()` checked only for number
of inputs of target strip, even if it's not an effect.
Only effects are treated in different way, so check for type as well.
Broken by 93c10797dc
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10356
This is something what comes after an experiment, which makes behavior
more desirable. Basically, for Lock-to-Selection functionality always
use control point position if any of control point itself or handles
are selected.
Initial patch from Sebastian, modification from Sergey.
Differential Revision: https://developer.blender.org/D10265
These weren't used since ages. Comment out the DNA define (value shouldn't be
reused to avoid compatibility breakage) and remove icon code for the types.
We generally prefer using enums over precompiler defines. This adds an actual
type for the values, which the compiler can use to throw warnings, give better
messages, etc.
* Attempt to improve readability by using focused, coherent helper classes.
* Replace ListBase with blender::Vector, which is more efficient and has a
better API.
* Split user reporting from error checking.
* Use namespace (as we usually do for C++ code).
* Remove unused headers
While Boolean is not guaranteed to work if the operands are not
volume-enclosing (technically: PWN - piecewise constant winding number),
it needs to do something in those cases. This change makes
more cases meet user expectations in T84493, T64544, T83403,
T82642 (though very slow on that one).
The original new boolean code used "generalized winding number"
for this fallback; replaced this with code that uses raycasting.
Raycasting would have been faster, but for unfortunately also
switchd to per-triangle tests rather than per-patch tests since
it is possible (e.g., with Suzanne) to have patches that are
both inside and outside the other shape. That can make it much
slower in some cases, sadly.
The old property never worked as expected because it was impossible expose the data as props.
Now, there are two methods to handle this: weight_get and weight_set
Example use:
```import bpy
ob = bpy.context.active_object
gpd = ob.data
gps = gpd.layers[0].frames[0].strokes[0]
i = 0
print("Weights\n================================")
for pt in gps.points:
gps.points.weight_set(vertex_group_index=0, point_index=i, weight=0.5)
i +=1
i = 0
for pt in gps.points:
weight = gps.points.weight_get(vertex_group_index=0, point_index=i)
print(weight)
i +=1
```
Reviewed By: brecht
Maniphest Tasks: T84967
Differential Revision: https://developer.blender.org/D10177
b3f989
It seems generally preferred to have new files be created with C++.
The only reason I didn't do that when I initially created the files is that I
was unsure about some C-API aspect.
Also use nullptr instead of NULL.
It seems generally preferred to have new files be created with C++.
The only reason I didn't do that when I initially created the files is that I
was unsure about some C-API aspect.
Also includes some minor C++ related cleanup (nullptr instead of NULL, remove
redundant `struct` keyword).
Currently the displayed distance when using the shrink/fatten transform
operator does not respect the scene units (they would always be in
blender units).
This changes makes sure the number is displayed in the correct unit.
Reviewed By: mano-wii
Maniphest Tasks: T85378
Differential Revision: https://developer.blender.org/D10325
Introduced by my commit: rB09709a7e64ff
This bug effectively enabled the NLA when it should be disabled, when
all tracks muted or no strips exist. Specifically, the NLA Action Track
settings would be used (extrapolation, blendmode, influence).
The function `nlastrip_evaluate_transition()` has been slightly
modified to use `nlasnapshot_blend()` instead of it's own special
blending function `nlaeval_snapshot_mix_and_free()`.
No user functional changes
Reviewed By: sybren, #animation_rigging
Differential Revision: https://developer.blender.org/D10221
This implements an operator to flip the contents of an image buffer. It
supports flipping the image horizontally and vertically.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10310
In some python scripts, the coordinates of the points are manipulated, but there are no way to force the recalculation and need hack to force the refresh.
The new api allows to call to the refresh function directly.
example: `gp_stroke.points.update()`
Unfortunately one issue raising another one, this ended up being a
fairly big update, with:
*Fixes:
** Dependencies between libraries are better handled (would fail
previously in some cases when the lib was also available as package).
** Dependency of Boost over Python is now taken into account.
** Fix CMake flags to use local own built boost.
** Fix building numpy.
*Changes:
** We now use pip for all python modules (including numpy).
** Added all missing python modules (requests etc.).
*Updates:
**USD: 20.08, Due to build failing with 20.05 (missing include).
Make the SHADING_PARAMETERS operation on node tree a real no-op.
The function used as a callback was only doing a debug print.
The issue with this function was that an original ID was passed
as an argument. This is a violation of design, and if anything it
should be left up to the implementation to check whether depsgraph
is active.
There are no functional changes for users in the interface. The
only difference is that the debug print will no longer happen.
Resolves modernize-raw-string-literal Clang-Tidy warning
The way warning works is it suggests to use raw literal when
overhead of having escape characters is higher than the overhead
of having raw literal syntax (talking about code size overhead).
This means that the warning will not trigger for "foo\"bar".
Differential Revision: https://developer.blender.org/D10322
This updates fixes the following issues (critical for 2.92):
- Issue that prevented dense 'int' grids from being exported (incorrect clip value)
- Issue with particles outside out of domain bounds (position between -1 and 0) not being deleted
Using this persistent field in `select_more_less_seq__internal` was
inapropriate in this case.
Split select more/less and linked code, because it was mixed in
`select_more_less_seq__internal()`
These operators work in completely different way.
`select_linked_internal()` doesn't use seq->tmp at all.
`seq->tmp` was used to mask strips selected by operator while iterating.
Use GSet to store temporary data instead of `seq->tmp`.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10326
This node takes a volume and generates a mesh on it's "surface".
The surface is defined by a threshold value.
Currently, the node only works on volumes generated by the
Points to Volume node. This limitation will be resolved soonish.
Ref T84605.
Differential Revision: https://developer.blender.org/D10243
When the pivot axis is not set to auto, the node will try to align the rotation
to vector as best as possible, given the selected rotation axis.
Ref T85211.
Differential Revision: https://developer.blender.org/D10292
This node calculates a distance from each point to the closest position
on a target geometry, similar to the vertex weight proximity modifier.
Mapping the output distance to a different range can be done with an
attribute math node after this node.
A drop-down changes whether to calculate distances from points,
edges, or faces. In points mode, the node also calculates distances
from point cloud points.
Design task and use cases: T84842
Differential Revision: https://developer.blender.org/D10154
Regression introduced by {rBed809866b172} where overlays weren't drawn
when overlays are turned off. The background in wireframe, solid
(always) and material preview and render preview (when not using scene
world) are also part of the overlays.
Caused by rBf83aa830cd00.
Since above commit, only meshes in editmode were considered for drawing
(because
BKE_view_layer_array_from_objects_in_edit_mode_unique_data_with_uvs was
used), but the option needs to work for texture paint mode as well, so
use BKE_view_layer_array_from_objects_in_mode_unique_data instead on
pass the draw_ctx->object_mode.
note: there is no good filter_fn to check if we have UVs if mesh is not
in editmode, this shouldnt cause much of a performance hit though.
Maniphest Tasks: T85396
Differential Revision: https://developer.blender.org/D10319
When transforming multiple strips to limits of sequencer timeline they get
squashed into one channel.
Store selection minimum and maximum channel in TransSeq and limit
transformation so no strip can be transformed beyond timeline boundary.
Reviewed By: Sergey, mano-wii
Differential Revision: https://developer.blender.org/D10013
Replace `long long` with an explicit `int64_t`. This is also what is
used in the FFmpeg headers.
Fixes clang diagnostics warning about wrong format used in the log.
Should be no functional changes.
Move `eUndoStepDir` to `BKE_undo_system.h` and use its values
everywhere.
Note that this also introduce the `STEP_INVALID` value in that enum.
Finally, kept the matching struct members in some lower-level readfile
code as an `int` to avoid having to include `BKE_undo_system.h` in a lot
of unrelated files.
When we have a local override, its linked reference may not be detected
as needing to be overridden anymore.
In that case, if there is no actual override defined by the user, assume
that we can get rid of this local override as part of the resync
process, and use the linked data directly instead.
Make it possible to attach a preview image to an Action.
In the #asset_browser_pose_libraries project, poses will be stored as
individual Action datablocks. Having a thumbnail for each pose is of
course essential.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D10306
This node outputs true when geometry nodes is currently evaluated
for the viewport and false for final renders.
Ref T85277.
Differential Revision: https://developer.blender.org/D10302
No need to show certain operators when they have no functionality.
For example, when adding a library override from the outliner menu, there should only be an option to add one (i.e. reset, delete, resync operators not relevant for objects without library override).
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D10301
The rotation direction was flipped recently.
This meant that rotation on a single axis gave negative results compared
with previous Blender releases.
This partially reverts a9b53daf23.
Differential Revision: https://developer.blender.org/D10299
Adds an exception so that the key-binding `control + Tab` does not get
duplicated as `command + Tab` on macOS because this is a global system
shortcut for the app switcher.
The key-binding `command + Tab` was shown for the operators “Toggle
Graph Editor“ and “Toggle Dope Sheet” in Dope Sheet and Graph Editor,
but only `control + Tab` actually worked.
Differential Revision: https://developer.blender.org/D10304
Win32 child windows on top of parents. Short-term solution of forcing is_dialog when owned.
Differential Revision: https://developer.blender.org/D9971
Reviewed by Brecht Van Lommel
Simplification of Win32 GHOST_WindowWin32 with improved support for owned windows.
Differential Revision: https://developer.blender.org/D9971
Reviewed by Brecht Van Lommel
When adding a new preset the name would be converted to lower case and
then displayed in the interface in title case. This was confusing
because the name didn't reflect what was typed, and there are many cases
when the name shouldn't be forced into title case (like 8K UHDTV for
example).
This commit leaves the custom preset names in the original casing, and
removes the conversion of filenames to title case for preset lists.
Differential Revision: https://developer.blender.org/D10224
Before committing D10224, bundled preset names that are lowercase need
updating to title case for display in the UI. This changes several of
the preset file names to title case, and fixes a couple of other naming
issues in the preset names. A few strings in the code are also changed
to reflect the new filename of the Blender keymap.
The driver variable `splines[0]` (on a curve)
behaved as if the path was `splines`.
Resolve pointers was well as properties as it's supported by the caller.
Error in original commit that added property support
82b0a9e369.
Refactor
//nlastrip_evaluate_actionclip()// and //nlaeval_blend_value()// into
//nlasnapshot_blend()//, //nlastrip_evaluate_actionclip()//,
//nlasnapshot_from_action()//.
**Motivations**:
* {T83615} Requires reading all pose bone fcurves before being able to
apply pre-blend transforms. The function //nlasnapshot_from_action()//
achieves this. This effectively removed the need to specially handle
Quaternion blend queuing so that code has been removed.
* {D8296} Adds support for keyframe remapping through an upper stack of
strips. Instead of introducing a variant of the form:
//nlastrip_evaluate_actionclip_inverted_get_lower()//,
//nlastrip_evaluate_actionclip()// will later be extended to take an
`evaluation_mode` as input to avoid duplicating the recursion functions
related to //nlastrip_evaluate()//.
* //nlasnapshot_blend()// will eventually have variants of
//nlasnapshot_blend_get_inverted_lower_snapshot()// and
//nlasnapshot_blend_get_inverted_upper_snapshot()// which are all
independent of NlaStrips and NlaTracks, further simplifying the
blending implementation. Ideally, //nlastrip_evaluate()// would get
renamed to //nlasnapshot_blend_strip()// but that'll be a later patch
to avoid unnecessary patches slowing the review of more important
patches.
No User-side Functional changes
Reviewed By: sybren, #animation_rigging
Differential Revision: https://developer.blender.org/D10220
**Problem**:
Translating a strip will truncate it when next to a transition.
**Solution**:
The code only accounted for the prev/next strip for whether it exceeds.
When it was a transition, the exceed logic fails. Now, we use the
nearest non-transition strip instead.
Reviewed By: sybren, #animation_rigging
Differential Revision: https://developer.blender.org/D10083
Dyntopo does not have Face Sets implemented yet, so the entire mesh is
considered a single Face Set. In that case, the check unique face set
function should always return true.
Reviewed By: JacquesLucke
Maniphest Tasks: T85230
Differential Revision: https://developer.blender.org/D10259
This ensured that the sculpt mode deformation is flushed to the mesh
datablock after leaving sculpt mode, so it can be duplicated and
extracted correctly.
Reviewed By: JacquesLucke
Maniphest Tasks: T85136
Differential Revision: https://developer.blender.org/D10254
A missing flush of the deformed PBVH coordinates to the shape key.
Reviewed By: JacquesLucke
Maniphest Tasks: T84370
Differential Revision: https://developer.blender.org/D10174
The edge preview data of the boundary needs to be freed with the
boundary data created for the brush. Also, all data for the
ScultpSession preview that is used to render the cursor needs to be
freed with the ##SculptSession##.
Found by Jacques Lucke
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10173
The white rotation Gizmo should always use the View orientation.
Before, if you set an orientation for the gizmo other than the default,
that gizmo would behave like the contraint Z Gizmo.
This is an old bug (strange not to have been reported before).
To define the direction of rotation, the View Vector is used.
However, only the projection matrix was being considered, but in
perspective mode, the position of the pivot also matters.
Good news is, this version support LLVM 11.
But it was a serious pain to get working, even ended having to add an
ugly hack to manually specify the OIIO include dir...
Ref: T83631.
Normally sockets only have one input link. This commit adds the back-end
changes needed to use multiple input links per socket.
Multi-input sockets can be defined with a new flag in `bNodeSocketType`.
The changes necessary to make the sockets work in the geometry nodes
evaluator are generalizing input socket values as a vector of values,
and supporting this in the derived node tree structure.
This patch should contain no functional changes. Two upcoming patches
will use this system for the "Join Geometry" node and expose link picking
and updated display in the UI: D10069 and D10181.
Reviewed By: Jacques Lucke, Hans Goudey
Differential Revision: https://developer.blender.org/D10067
Implements a node to get collection objects.
These objects are then passed along as instances in the node tree.
Follow up tasks:
Multiple nodes does not support instancing yet: T85159
Changing collection offset does not trigger a refresh: T85274
Reviewed By: Jacques, Dalai, Hans
Differential Revision: http://developer.blender.org/D10151
Adds Document Type Identifier configuration to use a system generated
document icon for Blender files on macOS. The system composites the
app’s icon and the extension name onto the document sheet icon
(new style on macOS 11 Big Sur and old style on macOS 10.15 Catalina
and earlier). This is in line with Apple’s Human Interface Guidelines.
Removes the previously used file icon because it is no longer needed.
Differential Revision: https://developer.blender.org/D10267
The 'ui_pan_to_scroll' uses 'WM_event_absolute_delta_y'. For scrolling the List View
we need to invert the direction to respect "natural scroll direction" system preferences.
Differential Revision: https://developer.blender.org/D10291
Since OBJMesh has dynamically allocated space in smooth groups
and uv_indices (which can be a lot), destruct objects that have
been written.
Use `const` at some places.
Write vertex normals only of smooth shaded polygons, otherwise
write face normals.
Keep normal indices in writer only since OBJMesh doesn't need to know
about export parameters. (will remove more such items from OBJMesh
later on.)
Keep MPoly related operations inside OBJMesh only & don't expose it to
Writer.
Since OBJMesh has dynamically allocated space in smooth groups
and uv_indices (which can be a lot), destruct objects that have
been written.
Use `const` at some places.
Write vertex normals only of smooth shaded polygons, otherwise
write face normals.
Keep normal indices in writer only since OBJMesh doesn't need to know
about export parameters. (will remove more such items from OBJMesh
later on.)
Keep MPoly related operations inside OBJMesh only & don't expose it to
Writer.
Fix several issues from the commit {rBefab0bc704ece3a}.
Previously, `ngon_tessellate` was filling the holes instead of
triangulating around them by using the "triangle-fan" method.
Now it triangulates around the holes and doesn't fill them.
Since `map_bump_strength` was changed to have a
leading space, length should be increased too.
Pass by reference to avoid copy.
Release resources if not moved by the owner in Mesh and
Curve creation code.
Context:
{rB9616e2ef78f0}
{rBc521b69ffb68}
In MTL parser, `Vector.first_index_of_try` result was being compared
with `string::npos` which gave correct results since `npos` is -1,
but is wrong semantically. So fix it.
The code so far imports triangles, but also fills holes.
Committing since it doesn't crash.
test file:
```
o plane_with_hole
v 2 2 0
v 2 -2 0
v -2 -2 0
v -2 2 0
v 1 1 0
v 1 -1 0
v -1 -1 0
v -1 1 0
f 4 1 2 3 4 8 5 6 7 8 4
```
The only place where the information needed about how many vertices
have been occupied by other objects is `mloop->v` since `v` has to
be in the range from zero to total vertices _in a_ mesh.
All other indices (edge, UV, normal) work best when they're parsed
the way they're written and the corresponding data from the global
list is read directly.
So instead of modifying every index just to keep `mloop->v` happy,
use a `Map<int, int>` for storing vertex indices. This reduces chances
of error greatly and avoid "indices to indices to coordinates".
`Vector` would've been very slow it being unsorted & lookups being done
for _all_ `mloop`s. `Map` gives no drop in performance.
UV vertices from `Geometry` have been removed since `FaceCorner`s store
a direct index indexing into the Global list of UV coordinates.
While being slightly more error prone, this change
gives a speedup of 1.9 s vs 1.2 s on a 23.3 MB 8-level
subdivided cube OBJ file. [1] The biggest time sink earlier
was splitting strings into smaller ones. Now it is `std::stof`
about which nothing much can be done.
`StringRef` has been completely removed to avoid
casts between `std::string_view::size_type` & `int64_t`
that `StringRef::size()` gives. Also, `find_{first/last}_{not/}_of`
and `substr` have been used a lot, which are missing in `StrinRef`.
The change also removes `\r\n` carriage return line breaks
while cleaning up the string.
Use `blender::StringRefNull` where null-terminated strings
are present.
`fprintf` has been replaced with `std::cerr` since
`std::string_view::data()` may give a pointer to a non
null terminated buffer. Also, error logging is not performance
-critical. [2]
[1] See week 7 reports for breakdown on the older timings.
https://wiki.blender.org/wiki/User:Ankitm/GSoC_2020_Daily_Reports#Week_7
[2] https://en.cppreference.com/w/cpp/string/basic_string_view/data
After discussion with the mentors [1], the terminology to use
Raw has been removed & `Geometry` is the new name for
"raw objects". eGeometryType has also been added to remove
confusion with OB_MESH etc.
`std::unique_ptr<T > *a` has been replaced with `T *a`.
Naming changes:
`curr_ob` -> `current_geometry` in the parser &
`geometry` in the `Mesh` & `Curve` creators.
`mesh_from_raw_` -> `blender_mesh_`. Similar for curve.
[1]: https://docs.google.com/document/d/17Uzl47OljjoKgaMbukiLHUVGQP220lPTmPS-atb65mw/
The enum approach was adding lots of repetitive functions
and switch-case blocks. Use `blender::Map` instead.
Also fix nodes overlapping.
Connect Texture nodes with correct sockets of p-BSDF.
Use `ntreeType_Shader->idname` instead of manually entering the
ID to avoid mistakes (which I did!
`ShaderNodeTree` vs `ShaderNodetree`).
Add assert in case caller doesn't own the `nodetree_`.
Fix passing `float a, int b` to `Span` instead
of `float *, size_t size`.
Remove remnant `stringstream s_line` which was used with `>>`
operator for storing floats and ints. That has been replaced
with `stof`/ `stoi`.
Limit the scope of MTL exporter's tex_node pointer.
In full build, the following error happens. So fix it by including the
definition file before the forward declaration one.
```
In file included from source/blender/io/collada/SkinInfo.cpp:40:
source/blender/blenkernel/BKE_object_deform.h:62:6: error:
enumeration previously declared with nonfixed underlying type
enum eVGroupSelect
^
In file included from source/blender/io/collada/SkinInfo.cpp:36:
source/blender/makesdna/DNA_scene_types.h:2099:14: note:
previous declaration is here
typedef enum eVGroupSelect {
^
1 error generated.
```
The lookups are now faster and insertion order is also
retained since no item is removed from the `VectorSet`.
Also fix a leak that happened due to mishandling of the pointer
to the allocated memory of `MDeformWeight`.
Remove potentially confusing loop index that is used with
`tot_loop_idx`.
Use static_cast wherever applicable.
Pass struct by reference.
Remove unnecessary const qualifiers for primitive types.
Make some member functions static instead.
Remove intermediate non-owning pointers to new class instances.
Remove else in else-after-return.
Initialise variables at definition.
I realised later on that Map is unordered, so the order of insertion,
on which def_nr depends, is not retained. So a Vector of strings
has been used & the index of the string-of-interest is the def_nr.
Unfortunately, it will be slow on large number of vertex groups.
This is required for setting deform groups which are a part of `Object` struct.
Also rename NurbsElem > OBJNurbsElem.
Remove forward declarations from *nurbs.hh & *mesh.hh files
since the cyclic dependency with *object.hh is removed.
Remove auto.
This change is to make it more clear that this is not a list of
Blender meshes, but objects that are being exported in Mesh form.
Same for NURBS curve.
Rename classes OBJImporter > OBJParser, OBJParentCollection >
OBJmportCollection.
Move OBJRawObject items to private access & use getters. Parser class
is set to its friend since it edits the Raw object heavily.
Break OBJMeshFromRaw and OBJCurveFromRaw into smaller functions with
one responsibility.
Add comments wherever required.
Use int instead of uint.
Remove typedef, use Span.
There's a problem though: the curve's vertices appear in edit mode
just fine, but the black line doesn't appear in object mode. But the code
so far should've been committed.
Also, some semantics have been made consistent which needed mesh
related functions/ members to be edited:
- `add_object_to_parent` for mesh is now similar to that of curves.
- `OB_MESH` is the default type of a raw object.
`copy_string_to_int` is also added to support multiple `int` values.
Since an OBJ file may contain data like [1], the vertex coordinates
list should be detached from any `OBJRawObject`. So every raw object
keeps track of its vertices by indexing into the global list of coordinates.
[1]
```
o plane
v 0 0 2
v 0 2 0
v 2 0 0
f 1 2 3
# note missing o <name>
v 1 1 0
v 1 0 0
v 0 1 0
v 0 0 0
g curve
cstype bspline
curv 0 1 -1 -2 -3 -4
...
```
Since nearly all but one use cases for `copy_string_to_int`
is for single integer, MutableSpan only adds extra
`{&integer ,1}` syntax at the caller. Better use `int &r_dst`.
Also make exception `const`
Add assert before casting `int` to `uint` for MEdge.
`{}` syntax would help catch when the C++ containers size() function
changes to `int64_t` since initialiser lists don't allow narrowing variables.
Specify that the strings are `_split`.
Also add comments for utility functions.
Also make `string` a `const &`; prefix return variables with `r_`.
Use `string::empty()` instead of comparing it with "" (clang-tidy).
The previous code was not initialising duplicate UV vertices which
created bad shapes in UV editor.
Also use range-loop.
Also since set_uv needs not be edited, mark curr_object const again.
The smooth group calculation must be done before normals are
written, to decide between vertex normals and face normals.
So moved the smooth group array in the OBJMesh's private members.
The mesh->mloopuv has the correct vertices, however it hits
the assert at `(uniform), function GPU_batch_uniform_4fv,`
`blender/source/blender/gpu/intern/gpu_batch.c, line 617.`
if one switches to UV editing workspace.
The function is moved to a class for a self-contained mesh operation.
BMesh operations will not be required without a mesh first, so they
should be kept in a Mesh operation class.
Remove unused variable: bmain
Keep classes ordered as per Style Guide.
Pass object_name to add_object_to_parent since only that is required.
Also considering to use `BM_mesh_bm_to_me_for_eval` to avoid
time spent in `BM_mesh_bm_to_me` for mesh data not required for OBJ.
So some commented code is present.
For uniformity, removed `const MPoly &mpoly` from `write_vertex_groups`
and `write_poly_material`, and replaced it with poly_index. And use
`get_ith_poly` to get the polygon needed.
Removed `is_shaded_smooth`. It was wrong to compare an object level
flag with a polygon level flag. Replaced its usage with
`tot_smooth_groups()`.
https://wiki.blender.org/wiki/Style_Guide
Changes here:
Move non trivial and non-inlined implementations to cc files instead
of header files.
Reorder classes according to style guide.
Remove documentation comments from header files and keep it near
implementation
Break up some functions into smaller ones: `insert_frame_in_path` etc.
Use reference as much as possible, instead of pointers.
Move `_` prefix to suffix of private class members.
Clean up warnings of implicit float conversions, uint conversions.
Use `ATTR_FALLTHROUGH` in switch cases. Move break inside the case
braces.
Remove `blender::io::obj::OBJ_export` function. It was a mistake.
Use `const` in getters.
Use `const char *set_name` instead of `void get_name` which was meant
to copy the buffer originally but then was neglected.
Don't expose `_export_mesh_eval` just for ensuring normals, moved it to
another function.
Use conventional destructor function names.
Upper case enums.
Design has slightly changed:
The line with `usemtl` has moved just before a face element is
being written. So whenever a face with a new material is encountered,
it can be labelled.
Appending to the MTL file is still at the same place, writing once every
object.
Wrong typecasting as bNodeSocketRGBA instead of bNodeSocketVector
causes `SOCK_VECTOR`'s `type` being read as `value[0]`.
So instead of having three different functions for float, vector & color, merging
into one and specifying Datatype seems better.
Reasons to prefer `Span`:
> - It is shorter.
> - It is const by default (whereas you could easily forget the const in `const Vector<T> &`).
And I did forget the `const` here!
https://developer.blender.org/D7987#inline-64852
Review update rB827869a45bccbf1e016580b#271046 (by Jacques Lucke)
As mentioned in his comments, `Map` will do a pointer comparison for
`char *` keys. So string would be better. Even though the `lookup` has
been removed, `std::string` is still okay.
Also instead of iterating over `Map.keys()`, and then looking up value,
now it's iterating over a key-value pair: `Map<T, T>::item` of strings.
Minor comment changes.
Two texture transform options, out of several, are supported now:
- Translation (origin offset) (syntax: "-o u v w")
- Scale (syntax: "-s u v w")
For Normal Map textures, Strength (bump multiplier) (syntax: "-bm s")
is also added.
I had to temporarily replace `nodeFindSocket` with its own
implementation to be able to build, since it doesn't accept
`const bNode*` which we're using everywhere.
I proposed a simple fix: D8142 for that. If and when it gets committed,
I'll remove the duplicate code.
Blender version string is also added in the MTL file.
Test file: {F8647881}
**Why not reuse the `write_mtl` in `export_obj.py` ?**
Because there are no benefits except saving some time now, only to later
waste it in debugging or extending it.
Having it in C++ provides easy extensibility when we need to
add more nodes' support without having to modify node_utils.py, which
itself is a hardcoded wrapper for BSDF and normal map shader nodes.
Quick Summary:
If export_params->export_materials is true, we create an empty MTL file
with the same name (not extension, of course) in the same directory.
`frame_writer` writes its name (with extension) to the OBJ file, to
reference it, as per format specs.
MTLWriter class is added in the new files. It uses NodeTreeRef committed
recently in rBe1cc9aa7f281 for a faster way to find two linked sockets.
`frame_writer` instantiates an MTLWriter for an object which then
*appends* that object's material to the previously created MTL file.
`append`'s usage causes `export_mesh_eval->totloop` many UV vertices
being written to the OBJ file. There are duplicates in that list.
So _tot_uv_vertices is being used to track the unique ones.
Added functionality in OBJNurbs & OBJWriter to export nurbs curve, not
as vertices and edges, but rather control points.
Nurbs surfaces are always converted to mesh and then exported as a
regular mesh with vertices, normals, UV (if it has any), and edges
(if it has no polygons) etc.
Review as per D8089:
Add constructors and destructors for both OBJWriter and OBJMesh classes
Move more variables to private and access the required via getters.
Remove unnecessary variables.
Rename ob_mesh to export_mesh_data.
Since we know the minimum number of UV vertices that a mesh can have,
its memory is reserved in advance. `append` later in the loop simply
checks whether there's sufficient space and edits the vector.
Also, in the edge writer, the last iteration is very unlikely :).
The OBJWriter class' one instance writes to one file.
All OBJWriter handles is writing to the file after calling functions
of OBJMesh which collect the required data.
OBJNurbs and OBJMaterial will be added soon too.
An option in the exporter UI is added for exporting curves as NURBS.
But it doesn't do anything. All curves are exported as a mesh with
vertex coordinates and edges indexing into those coords.
The code duplication is obvious, it will be refactored to be reused
and with keeping object oriented style in mind.
Review update for comments in D7959. No new feature has been added.
Changes here:
Use PIL_time.h instead of chrono. Use BLI_path_util.h instead of stdio.
Remove redundant `_to_export` suffix from some variables.
Clarify that `object_to_export` is `ob_mesh` to distinguish it from
curves objects later on.
Edited comments.
Change in face normal calculation in one loop instead of three for the
three axes components.
Add const where required.
Not hardcode Blender version but use `BKE_blender_version_string()`.
Add filenames to error messages in file opening.
No functional change is there.
This change is required to distinguish mesh objects from curve objects.
Both of them have different requirements for the structs they'd use to
store their processed data.
So instead of adding if-else everywhere, curves and meshes can be
separated into different files.
Add UI checkbox for triangulating before writing the OBJ file.
The scene is not modified at all. Actual modifier should be used if one
needs the mesh to be modified too.
The settings for triangulation are the same as default ones of the
modifier:
ngon-method: "Beauty", quad-method: "Shortest Diagonal", min vertices:4
Adds options in the UI for writing normals and UV coordinates to
the OBJ file.
{F8627897}
As expected, calculating both of them is also skipped conditionally.
However, the memory for normals is still allocated; just not used.
All frames are now exportable including negative ones, instead of
only 0-1000.
Added checkbox for Animation for better UI {F8622012}
File name doesn't contain frame name if no animation is being exported.
Noticed that `source/blender/io/wavefront_obj/IO_wavefront_obj.h` is
missing in the IDE's edited files list. So edited that in.
Frame 20 with mentioned filename `name` is exported to `name020.obj`
It should be modified to exclude cases when a single frame is being
exported to avoid overwriting what the user intended to name it.
Also a filter is added to include only OB_MESH type objects for export.
The limits on frames can be changed, the current limits are like this:
Let's say unknowingly, the user selects the maximum 1000 frames & every
file is 1 MB in size. That will quickly fill up 1 GB on the disk.
More frames add to this risk.
Adds support for multiple objects to be exported from a frame.
Also checks for them to be OB_MESH types. More object types need to be
supported yet.
Renamed data_to_export to more fitting, object_to_export of which we
use vector to contain all exportable objects.
Remove unused fstream based file writer since fprintf is consistently
faster.
Also reduce function calls of fprintf since lengthy arguments were
already removed.
This commit adds support for UV vertex coordinates in the form:
`vt u v` for all vertices in the texture map.
Also, their indices are exported as per file format specification [1,2]
`f */vt1/* */vt2/*` for all polygons.
The text written by this and the python exporter has different order
of coordinates and thus their indices too. So direct diff of the two
files will not work.
Minor comments about 0-based/ 1-based indices are also added.
[1]: https://en.wikipedia.org/wiki/Wavefront_.obj_file#File_format
[2]: http://www.martinreddy.net/gfx/3d/OBJ.spec
Changes here:
Reverted temporarily to std::vector to keep working, instead of
waiting for D7931 to get committed in master.
Adds an forced inline function for calculation of face/ polygon normals
by averaging vertex normals. I will look for an existing method.
This way, the allocated memory in `data_to_export->mvert[i].no` is
actually used.
Also, `BLI::Vector<uint> face_normal_index` is not needed anymore since
we loop over the same polygon list while writing normals, so
their indices will be the same.
Adds a writer method option, `fprintf`, which is faster than `fstream`.
With fstream, 478 MB of an ico-sphere with 8 subsurf takes 22 seconds.
with fprintf, the same takes 13 seconds.
With fstream, a 44 MB of cube with 8 subsurf take 2.3 seconds.
with fprintf, the same takes 1.4 seconds.
Adds timing info of the full export directly in console.
Removed unused and repeated headers from `wavefront_obj.cc`.
Differential Revision: https://developer.blender.org/D7959
Changes here:
Made variables `vertex` & `polygon` for better readability in writer.
`data_to_export->mvert`
`data_to_export->polygon_list`
Edited comments as per review in D7918.
Removed extraneous `io::obj::` being used in the same namespace.
Since capitalised namespaces could cause confusion with classes, they
are changed to lower case, in uniformity with the rest of the code.
Also, in some old settings in exporter file selector are renamed to
show that they do nothing. As William Reynish suggested on devtalk
feedback thread, at some point, it'd be good to have them drawn with
python panels. [1]
[1]: devtalk.blender.org/t/13528/2
Changes here:
- Removed unused ex(im)port_params members.
- Made ex(im)port_params consistent.
- Moved `filepath` to OBJEx(Im)port_Params.
- Edited comments as per comments.
- Use <BLI_vector.hh> instead of <vector>.
- Move functions to namespace IO::OBJ.
Since all headers internal to wavefront_obj are C++ headers, renamed
them to `.hh` following the style guide about extensions.
All occurrences of the header files & their include guards are also
modified.
Changes here:
Move the files in `blender/io/obj` to `blender/io/obj/intern` following
the rest of the code structure.
Prefix `obj` in filenames with `wavefront_` to avoid confusion with
Blender object data type or compiled C file.
Include guards renaming according to new filenames.
`#include "*"` renames: for example
`#include "obj.h"` to `#include "wavefront_obj.h`
Rename `bf_obj` to `bf_wavefront_obj` in CMakeLists.txt.
Single object geometry data exporter: vertex, vertex normal, faces.
Completed the todos in rB3c947bd5a6a2.
Todo:
Add object name.
Export multiple objects in the same file.
Verify it on other complex shapes.
Texture coordinates.
- Added all required dummy files.
- Finished rudimentary UI for Importer too.
- Among the several ways to get the current/ active object, picked
the most common way to get to the vertices. Might have to change
it, when _export all objects_, etc settings appear.
TODO:
- Will finalise a singular data structure.
- Will discuss about `#include`s in `.h` vs `.cpp`.
- Filepath may be moved inside `OBJExportParams`.
- Clear up `io_obj.c`'s includes.
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGSCXX_WARN_NO_OVERLOADED_VIRTUAL-Wno-overloaded-virtual)# we get a lot of these, if its a problem a dev needs to look into it.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
